Reaction Order Ambiguity in Integrated Rate Plots
Lee, Joe
2008-01-01
Integrated rate plots are frequently used in reaction kinetics to determine orders of reactions. It is often emphasised, when using this methodology in practice, that it is necessary to monitor the reaction to a substantial fraction of completion for these plots to yield unambiguous orders. The present article gives a theoretical and statistical…
15 CFR 700.3 - Priority ratings and rated orders.
2010-01-01
... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Priority ratings and rated orders. 700.3 Section 700.3 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE...
The order and volume fill rates in inventory control systems
DEFF Research Database (Denmark)
Thorstenson, Anders; Larsen, Christian
2011-01-01
This paper differentiates between an order (line) fill rate and a volume fill rate and specifies their performance for different inventory control systems. When the focus is on filling complete customer orders rather than total quantities the order fill rate would be the preferred service level m...
Dissolution rate enhancement of piroxicam by ordered mixing.
Saharan, Vikas Anand; Choudhury, Pratim Kumar
2012-07-01
Micronized piroxicam was mixed with lactose, mannitol, sorbitol, maltitol and sodium chloride to produce ordered mixture in a glass vial by manual hand shaking method. The effect of excipients, surfactant, superdisintegrant, drug concentration and carrier particle size on dissolution rate was investigated. Dissolution rate studies of the prepared ordered mixtures revealed that all water soluble excipients increased the dissolution rate of piroxicam when compared to the dissolution rate of piroxicam or its suspension. Ordered mixture formulation PLF4, consisting of lactose as water soluble excipient, SSG (8% w/s) and SLS (1% w/w), released piroxcam at a very fast rate so much so that about 90% of the composition had passed into solution within 2 min. The order of the dissolution rate enhancement for ordered mixtures of various water soluble excipients was: lactose > mannitol > maltitol > sorbitol > sodium chloride. Carrier granules of size 355-710 µm were most effective in increasing the dissolution rate of drug from ordered mixtures. Decreasing the carrier particle size reduced drug dissolution from ordered mixtures. The dissolution rate of ordered mixtures consisting of 1-5% w/w piroxicam was superior to dissolution rate of piroxicam suspension. The dissolution data fitting and the resulting regression parameters indicated Hixson Crowell, cube root law, as the best fit to drug release data of ordered mixtures.
The order and volume fill rates in inventory control systems
DEFF Research Database (Denmark)
Thorstenson, Anders; Larsen, Christian
2011-01-01
This paper differentiates between an order (line) fill rate and a volume fill rate and specifies their performance for different inventory control systems. When the focus is on filling complete customer orders rather than total quantities the order fill rate would be the preferred service level...... measure. The main result shows how the order and volume fill rates are related in magnitude. Earlier results derived for a single-item, single-stage, continuous review inventory system with backordering and constant lead times controlled by a base-stock policy are extended in different directions...
The order and volume fill rates in inventory control systems
DEFF Research Database (Denmark)
Thorstenson, Anders; Larsen, Christian
2014-01-01
This paper differentiates between an order (line) fill rate and a volume fill rate and specifies their performance for different inventory control systems. When the focus is on filling complete customer orders rather than total demanded quantity the order fill rate would be the preferred service...... level measure. The main result shows how the order and volume fill rates are related in magnitude. Earlier results derived for a single-item, single-stage, continuous review inventory system with backordering and constant lead times controlled by a base-stock policy are extended in different directions...... extensions consider more general inventory control review policies with backordering, as well as some relations between service measures. A particularly important result in the paper concerns an alternative service measure, the customer order fill rate, and shows how this measure always exceeds the other two...
15 CFR 700.12 - Elements of a rated order.
2010-01-01
...) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE REGULATIONS DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM Industrial Priorities § 700.12 Elements of a rated order. Each...
15 CFR 700.17 - Use of rated orders.
2010-01-01
...) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE REGULATIONS DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM Industrial Priorities § 700.17 Use of rated orders. (a) A person...
Mitigating costs and the preemptive effect of federal rate orders
International Nuclear Information System (INIS)
Darr, F.P.
1992-01-01
The role of federalism in the regulation of energy production is a long-standing problem. This article is divided into five parts. Following a summary of the case 'New Orleans Public Service, Inc. v. Council of New Orleans' (NOPSI) in Part I the article addresses the statutory and interpretive foundations of the filed rate doctrine described in Part II. Part III discusses the Supreme Court's extension of the doctrine into greater federal management of retail rates and introduces the reaction of the lower courts to the Supreme Court's decisions. Part IV analyzes the NOPSI exception requiring a utility to mitigate the effects of a FERC order in light of the policy distinctions inherent in the filed rate doctrine and the recognized eceptions. Part V addresses a related policy issue of the appropriate venue for challenging state orders to deny costs arising from federal orders. 153 refs
RCS Leak Rate Calculation with High Order Least Squares Method
International Nuclear Information System (INIS)
Lee, Jeong Hun; Kang, Young Kyu; Kim, Yang Ki
2010-01-01
As a part of action items for Application of Leak before Break(LBB), RCS Leak Rate Calculation Program is upgraded in Kori unit 3 and 4. For real time monitoring of operators, periodic calculation is needed and corresponding noise reduction scheme is used. This kind of study was issued in Korea, so there have upgraded and used real time RCS Leak Rate Calculation Program in UCN unit 3 and 4 and YGN unit 1 and 2. For reduction of the noise in signals, Linear Regression Method was used in those programs. Linear Regression Method is powerful method for noise reduction. But the system is not static with some alternative flow paths and this makes mixed trend patterns of input signal values. In this condition, the trend of signal and average of Linear Regression are not entirely same pattern. In this study, high order Least squares Method is used to follow the trend of signal and the order of calculation is rearranged. The result of calculation makes reasonable trend and the procedure is physically consistence
Ho, Yuh-Shan
2006-01-01
A comparison was made of the linear least-squares method and a trial-and-error non-linear method of the widely used pseudo-second-order kinetic model for the sorption of cadmium onto ground-up tree fern. Four pseudo-second-order kinetic linear equations are discussed. Kinetic parameters obtained from the four kinetic linear equations using the linear method differed but they were the same when using the non-linear method. A type 1 pseudo-second-order linear kinetic model has the highest coefficient of determination. Results show that the non-linear method may be a better way to obtain the desired parameters.
15 CFR 700.18 - Limitations on placing rated orders.
2010-01-01
... Memoranda of Understanding to other agencies. Unless otherwise agreed to by the concerned agencies, the... of Energy); (iii) Health resources (Department of Health and Human Services); (iv) All forms of civil... Engineers); and (vi) Communications services (National Communications System under Executive Order 12472 of...
A simple and accurate approximation for the order fill rates in lost-sales Assemble-to-Order systems
Hoen, K.M.R.; Güllü, R.; van Houtum, Geert-Jan; Vliegen, Ingrid
2010-01-01
In this paper we consider an Assemble-to-Order system with multiple end-products. Demands for an end-product follow a Poisson process and each end-product requires a fixed set of components. We are interested in the order fill rates, i.e., the percentage of demands for which all requested components
The dynamic interaction of order flows and the CAD/USD exchange rate
Nikola Gradojevic; Christopher J. Neely
2008-01-01
We explore the relationship between disaggregated order flow, the Canada/U.S. dollar (CAD/USD) market and U.S. macroeconomic announcements. Three types of CAD order flow and the CAD/USD are cointegrated. Financial order flow appears to contemporaneously drive the CAD/USD while commercial order flow seems to contemporaneously respond to exchange rate movements. Past order flow and lagged exchange rates strongly explain most types of order flow. Despite this predictability and the contemporaneo...
Czech Academy of Sciences Publication Activity Database
Lukeš, Petr; Doležalová, Eva; Sisrová, Irena; Člupek, Martin
2014-01-01
Roč. 23, č. 1 (2014), 015019-015019 ISSN 0963-0252 Grant - others:Rada Programu interní podpory projektů mezinárodní spolupráce AV ČR(CZ) M100431203 Program:M Institutional support: RVO:61389021 Keywords : air discharge plasma * plasma–liquid interactions * peroxynitrite * hydrogen peroxide * phenol * bacteria Subject RIV: BL - Plasma and Gas Discharge Physics Impact factor: 3.591, year: 2014 http://iopscience.iop.org/0963-0252/23/1/015019/pdf/0963-0252_23_1_015019.pdf
Ganguly, J.; Yang, H.; Ghose, S.
1993-01-01
The cooling rates of meteorites provide important constraints on the size of their parent bodies, and their accretionary and evolutionary histories. However, the cooling rates obtained so far from the commonly used metallographic, radiometric and fission-track methods have been sometimes quite controversial, such as in the case of the mesosiderites and the meteorite Shaw. We have undertaken a systematic study of the cooling rates of meteorites using a different approach, which involves single crystal x-ray determination of Fe(2+)-Mg ordering in orthopyroxenes (OP(x)) in meteorites, subject to bulk compositional constraints, and numerical simulation of the evolution of the ordering state as a function of cooling rate, within the framework of the thermodynamic and kinetic principles governing cation ordering. We report the results obtained for OP(x) crystals from Shaw and two mesosiderites, Estherville and Bondoc.
Roşu, M. M.; Tarbă, C. I.; Neagu, C.
2016-11-01
The current models for inventory management are complementary, but together they offer a large pallet of elements for solving complex problems of companies when wanting to establish the optimum economic order quantity for unfinished products, row of materials, goods etc. The main objective of this paper is to elaborate an automated decisional model for the calculus of the economic order quantity taking into account the price regressive rates for the total order quantity. This model has two main objectives: first, to determine the periodicity when to be done the order n or the quantity order q; second, to determine the levels of stock: lighting control, security stock etc. In this way we can provide the answer to two fundamental questions: How much must be ordered? When to Order? In the current practice, the business relationships with its suppliers are based on regressive rates for price. This means that suppliers may grant discounts, from a certain level of quantities ordered. Thus, the unit price of the products is a variable which depends on the order size. So, the most important element for choosing the optimum for the economic order quantity is the total cost for ordering and this cost depends on the following elements: the medium price per units, the stock cost, the ordering cost etc.
Order of current variance and diffusivity in the rate one totally asymmetric zero range process
Balázs, M.; Komjáthy, J.
2008-01-01
We prove that the variance of the current across a characteristic is of order t 2/3 in a stationary constant rate totally asymmetric zero range process, and that the diffusivity has order t 1/3. This is a step towards proving universality of this scaling behavior in the class of one-dimensional
Order-α corrections to the decay rate of orthopositronium in the Fried-Yennie gauge
International Nuclear Information System (INIS)
Adkins, G.S.; Salahuddin, A.A.; Schalm, K.E.
1992-01-01
The order-α correction to the decay rate of orthopositronium is obtained using the Fried-Yennie gauge. The result (mα 7 /π 2 ) [-1.987 84(11)] is consistent with but more accurate than the results of previous evaluations
Effects of Cooling Rate on 6.5% Silicon Steel Ordering
Energy Technology Data Exchange (ETDEWEB)
Cui, Jun [Ames Lab. and Iowa State Univ., Ames, IA (United States); Macziewski, Chad [Iowa State Univ., Ames, IA (United States); Jensen, Brandt [Ames Lab., Ames, IA (United States); Ouyang, Gaoyuan [Iowa State Univ., Ames, IA (United States); Zhou, Lin [Ames Lab., Ames, IA (United States); Dennis, Kevin [Ames Lab., Ames, IA (United States); Zarkevich, Nikolai [Ames Lab., Ames, IA (United States); Jiang, Xiujuan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tang, Wei [Ames Lab., Ames, IA (United States); Zhou, Shihuai [Ames Lab., Ames, IA (United States); Simsek, Emrah [Ames Lab., Ames, IA (United States); Napolitano, Ralph [Iowa State Univ., Ames, IA (United States); Kramer, Matt [Ames Lab., Ames, IA (United States)
2017-03-02
Increasing Si content improves magnetic and electrical properties of electrical steel, with 6.5% Si as the optimum. Unfortunately, when Si content approaches 5.7%, the Fe-Si alloy becomes brittle. At 6.5%, the steel conventional cold rolling process is no longer applicable. The heterogeneous formation of B2 and D03 ordered phases is responsible for the embrittlement. The formation of these ordered phases can be impeded by rapid cooling. However, only the cooling rates of water and brine water were investigated. A comprehensive study of the effect of rapid cooling rate on the formation of the ordered phases was carried out by varying wheel speed and melt-injection rate. Thermal imaging employed to measure cooling rates while microstructures of the obtained ribbons are characterized using X-ray diffraction and TEM. The electrical, magnetic and mechanical properties are characterized using 4-pt probe, VSM, and macro-indentation methods. The relations between physical properties and ordered phases are established.
The capacity investment decision for make-to-order production systems with demand rate control
Bertrand, J.W.M.; Ooijen, van H.P.G.
2012-01-01
In this paper we study the capacity investment decision for make-to-order manufacturing firms that utilize a fixed capacity, operate in a stochastic, stationary market, and can influence their demand rate by increasing or decreasing their sales effort. We consider manufacturing situations that
Leung, Alexander A; Keohane, Carol; Lipsitz, Stuart; Zimlichman, Eyal; Amato, Mary; Simon, Steven R; Coffey, Michael; Kaufman, Nathan; Cadet, Bismarck; Schiff, Gordon; Seger, Diane L; Bates, David W
2013-06-01
The Leapfrog CPOE evaluation tool has been promoted as a means of monitoring computerized physician order entry (CPOE). We sought to determine the relationship between Leapfrog scores and the rates of preventable adverse drug events (ADE) and potential ADE. A cross-sectional study of 1000 adult admissions in five community hospitals from October 1, 2008 to September 30, 2010 was performed. Observed rates of preventable ADE and potential ADE were compared with scores reported by the Leapfrog CPOE evaluation tool. The primary outcome was the rate of preventable ADE and the secondary outcome was the composite rate of preventable ADE and potential ADE. Leapfrog performance scores were highly related to the primary outcome. A 43% relative reduction in the rate of preventable ADE was predicted for every 5% increase in Leapfrog scores (rate ratio 0.57; 95% CI 0.37 to 0.88). In absolute terms, four fewer preventable ADE per 100 admissions were predicted for every 5% increase in overall Leapfrog scores (rate difference -4.2; 95% CI -7.4 to -1.1). A statistically significant relationship between Leapfrog scores and the secondary outcome, however, was not detected. Our findings support the use of the Leapfrog tool as a means of evaluating and monitoring CPOE performance after implementation, as addressed by current certification standards. Scores from the Leapfrog CPOE evaluation tool closely relate to actual rates of preventable ADE. Leapfrog testing may alert providers to potential vulnerabilities and highlight areas for further improvement.
Higher order constraints on the Higgs production rate from fixed-target DIS data
International Nuclear Information System (INIS)
Alekhin, S.; Bluemlein, J.; Moch, S.
2011-01-01
The constraints of fixed-target DIS data in fits of parton distributions including QCD corrections to next-to-next-to leading order are studied. We point out a potential problem in the analysis of the NMC data which can lead to inconsistencies in the extracted value for α s (M Z ) and the gluon distribution at higher orders in QCD. The implications for predictions of rates for Standard Model Higgs boson production at hadron colliders are investigated. We conclude that the current range of excluded Higgs boson masses at the Tevatron appears to be much too large. (orig.)
Test order in teacher-rated behavior assessments: Is counterbalancing necessary?
Kooken, Janice; Welsh, Megan E; McCoach, D Betsy; Miller, Faith G; Chafouleas, Sandra M; Riley-Tillman, T Chris; Fabiano, Gregory
2017-01-01
Counterbalancing treatment order in experimental research design is well established as an option to reduce threats to internal validity, but in educational and psychological research, the effect of varying the order of multiple tests to a single rater has not been examined and is rarely adhered to in practice. The current study examines the effect of test order on measures of student behavior by teachers as raters utilizing data from a behavior measure validation study. Using multilevel modeling to control for students nested within teachers, the effect of rating an earlier measure on the intercept or slope of a later behavior assessment was statistically significant in 22% of predictor main effects for the spring test period. Test order effects had potential for high stakes consequences with differences large enough to change risk classification. Results suggest that researchers and practitioners in classroom settings using multiple measures evaluate the potential impact of test order. Where possible, they should counterbalance when the risk of an order effect exists and report justification for the decision to not counterbalance. (PsycINFO Database Record (c) 2016 APA, all rights reserved).
Effects of substrate misorientation and growth rate on ordering in GaInP
Su, L. C.; Ho, I. H.; Stringfellow, G. B.
1994-05-01
Epitaxial layers of GaxIn1-xP with x≊0.52 have been grown by organometallic vapor-phase epitaxy on GaAs substrates misoriented from the (001) plane in the [1¯10] direction by angles ϑm, of 0°, 3°, 6°, and 9°. For each substrate orientation growth rates rg of 1, 2, and 4 μm/h have been used. The ordering was characterized using transmission electron diffraction (TED), dark-field imaging, and photoluminescence. The (110) cross-sectional images show domains of the Cu-Pt structure separated by antiphase boundaries (APBs). The domain size and shape and the degree of order are found to be strongly affected by both the substrate misorientation and the growth rate. For example, lateral domain dimensions range from 50 Å for layers grown with rg=4 μm/h and ϑm=0° to 2500 Å for rg=1 μm/h and ϑm=9°. The APBs generally propagate from the substrate/epilayer interface to the top surface at an angle to the (001) plane that increases dramatically as the angle of misorientation increases. The angle is nearly independent of growth rate. From the superspot intensities in the TED patterns, the degree of order appears to be a maximum for ϑm≊5°. Judging from the reduction in photoluminescence peak energy caused by ordering, the maximum degree of order appears to occur at ϑm≊4°.
The Dividend Discount Model with Multiple Growth Rates of Any Order for Stock Evaluation
Hatemi-J, Abdulnasser; El-Khatib, Youssef
2018-01-01
In this paper we provide a general solution for the dividend discount model in order to compute the intrinsic value of a common stock that allows for multiple stage growth rates of any predetermined number of periods. A mathematical proof is provided for the suggested general solution. A numerical application is also presented. The solution introduced in this paper is expected to improve on the precision of stock valuation, which might be of fundamental importance for investors as well as fin...
The impact of item order on ratings of cancer risk perception.
Taylor, Kathryn L; Shelby, Rebecca A; Schwartz, Marc D; Ackerman, Josh; LaSalle, V Holland; Gelmann, Edward P; McGuire, Colleen
2002-07-01
Although perceived risk is central to most theories of health behavior, there is little consensus on its measurement with regard to item wording, response set, or the number of items to include. In a methodological assessment of perceived risk, we assessed the impact of changing the order of three commonly used perceived risk items: quantitative personal risk, quantitative population risk, and comparative risk. Participants were 432 men and women enrolled in an ancillary study of the Prostate, Lung, Colorectal, and Ovarian Cancer Screening Trial. Three groups of consecutively enrolled participants responded to the three items in one of three question orders. Results indicated that item order was related to the perceived risk ratings of both ovarian (P Perceptions of risk were significantly lower when the comparative rating was made first. The findings suggest that compelling participants to consider their own risk relative to the risk of others results in lower ratings of perceived risk. Although the use of multiple items may provide more information than when only a single method is used, different conclusions may be reached depending on the context in which an item is assessed.
Directory of Open Access Journals (Sweden)
Dilek Teker
2013-01-01
Full Text Available The aim of this research is to compose a new rating methodology and provide credit notches to 23 countries which of 13 are developed and 10 are emerging. There are various literature that explains the determinants of credit ratings. Following the literature, we select 11 variables for our model which of 5 are eliminated by the factor analysis. We use specific dummies to investigate the structural breaks in time and cross section such as pre crises, post crises, BRIC membership, EU membership, OPEC membership, shipbuilder country and platinum reserved country. Then we run an ordered probit model and give credit notches to the countries. We use FITCH ratings as benchmark. Thus, at the end we compare the notches of FITCH with the ones we derive out of our estimated model.
Regnery, J.
2015-05-29
This study developed relationships between the attenuation of emerging trace organic chemicals (TOrC) during managed aquifer recharge (MAR) as a function of retention time, system characteristics, and operating conditions using controlled laboratory-scale soil column experiments simulating MAR. The results revealed that MAR performance in terms of TOrC attenuation is primarily determined by key environmental parameters (i.e. redox, primary substrate). Soil columns with suboxic and anoxic conditions performed poorly (i.e. less than 30% attenuation of moderately degradable TOrC) in comparison to oxic conditions (on average between 70-100% attenuation for the same compounds) within a residence time of three days. Given this dependency on redox conditions, it was investigated if key parameter-dependent rate constants are more suitable for contaminant transport modeling to properly capture the dynamic TOrC attenuation under field-scale conditions. Laboratory-derived first-order removal kinetics were determined for 19 TOrC under three different redox conditions and rate constants were applied to MAR field data. Our findings suggest that simplified first-order rate constants will most likely not provide any meaningful results if the target compounds exhibit redox dependent biotransformation behavior or if the intention is to exactly capture the decline in concentration over time and distance at field-scale MAR. However, if the intention is to calculate the percent removal after an extended time period and subsurface travel distance, simplified first-order rate constants seem to be sufficient to provide a first estimate on TOrC attenuation during MAR.
Regnery, J; Wing, A D; Alidina, M; Drewes, J E
2015-08-01
This study developed relationships between the attenuation of emerging trace organic chemicals (TOrC) during managed aquifer recharge (MAR) as a function of retention time, system characteristics, and operating conditions using controlled laboratory-scale soil column experiments simulating MAR. The results revealed that MAR performance in terms of TOrC attenuation is primarily determined by key environmental parameters (i.e., redox, primary substrate). Soil columns with suboxic and anoxic conditions performed poorly (i.e., less than 30% attenuation of moderately degradable TOrC) in comparison to oxic conditions (on average between 70-100% attenuation for the same compounds) within a residence time of three days. Given this dependency on redox conditions, it was investigated if key parameter-dependent rate constants are more suitable for contaminant transport modeling to properly capture the dynamic TOrC attenuation under field-scale conditions. Laboratory-derived first-order removal kinetics were determined for 19 TOrC under three different redox conditions and rate constants were applied to MAR field data. Our findings suggest that simplified first-order rate constants will most likely not provide any meaningful results if the target compounds exhibit redox dependent biotransformation behavior or if the intention is to exactly capture the decline in concentration over time and distance at field-scale MAR. However, if the intention is to calculate the percent removal after an extended time period and subsurface travel distance, simplified first-order rate constants seem to be sufficient to provide a first estimate on TOrC attenuation during MAR. Copyright © 2015 Elsevier B.V. All rights reserved.
The Impact of an Electronic Ordering System on Blood Bank Specimen Rejection Rates.
Forest, Stefanie K; Shirazi, Maryam; Wu-Gall, Charlotte; Stotler, Brie A
2017-01-01
To evaluate the impact that an electronic ordering system has on the rate of rejection of blood type and screen testing samples and the impact on the number of ABO blood-type discrepancies over a 4-year period. An electronic ordering system was implemented in May 2011. Rejection rates along with reasons for rejection were tracked between January 2010 and December 2013. A total of 40,104 blood samples were received during this period, of which 706 (1.8%) were rejected for the following reasons: 382 (54.0%) unsigned samples, 235 (33.0%) mislabeled samples, 57 (8.0%) unsigned requisitions, 18 (2.5%) incorrect tubes, and 14 (1.9%) ABO discrepancies. Of the samples, 2.5% were rejected in the year prior to implementing the electronic ordering system compared with 1.2% in the year following implementation ( P blood sample rejection. © American Society for Clinical Pathology, 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com
A note on inventory model for ameliorating items with time dependent second order demand rate
Directory of Open Access Journals (Sweden)
Gobinda Chandra Panda
2013-03-01
Full Text Available Background: This paper is concerned with the development of ameliorating inventory models. The ameliorating inventory is the inventory of goods whose utility increases over the time by ameliorating activation. Material and Methods: This study is performed according to two areas: one is an economic order quantity (EOQ model for the items whose utility is ameliorating in accordance with Weibull distribution, and the other is a partial selling quantity (PSQ model developed for selling the surplus inventory accumulated by ameliorating activation with linear demand. The aim of this paper was to develop a mathematical model for inventory type concerned in the paper. Numerical examples were presented show the effect of ameliorating rate on inventory polices. Results and Conclusions: The inventory model for items with Weibull ameliorating is developed. For the case of small ameliorating rate (less than linear demand rate, EOQ model is developed, and for the case where ameliorating rate is greater than linear demand rate, PSQ model is developed. .
Application of long-range order to predict unfolding rates of two-state proteins.
Harihar, B; Selvaraj, S
2011-03-01
Predicting the experimental unfolding rates of two-state proteins and models describing the unfolding rates of these proteins is quite limited because of the complexity present in the unfolding mechanism and the lack of experimental unfolding data compared with folding data. In this work, 25 two-state proteins characterized by Maxwell et al. (Protein Sci 2005;14:602–616) using a consensus set of experimental conditions were taken, and the parameter long-range order (LRO) derived from their three-dimensional structures were related with their experimental unfolding rates ln(k(u)). From the total data set of 30 proteins used by Maxwell et al. (Protein Sci 2005;14:602–616), five slow-unfolding proteins with very low unfolding rates were considered to be outliers and were not included in our data set. Except all beta structural class, LRO of both the all-alpha and mixed-class proteins showed a strong inverse correlation of r = -0.99 and -0.88, respectively, with experimental ln(k(u)). LRO shows a correlation of -0.62 with experimental ln(k(u)) for all-beta proteins. For predicting the unfolding rates, a simple statistical method has been used and linear regression equations were developed for individual structural classes of proteins using LRO, and the results obtained showed a better agreement with experimental results. Copyright © 2010 Wiley-Liss, Inc.
Lyapunov Exponent and Out-of-Time-Ordered Correlator's Growth Rate in a Chaotic System.
Rozenbaum, Efim B; Ganeshan, Sriram; Galitski, Victor
2017-02-24
It was proposed recently that the out-of-time-ordered four-point correlator (OTOC) may serve as a useful characteristic of quantum-chaotic behavior, because, in the semiclassical limit ℏ→0, its rate of exponential growth resembles the classical Lyapunov exponent. Here, we calculate the four-point correlator C(t) for the classical and quantum kicked rotor-a textbook driven chaotic system-and compare its growth rate at initial times with the standard definition of the classical Lyapunov exponent. Using both quantum and classical arguments, we show that the OTOC's growth rate and the Lyapunov exponent are, in general, distinct quantities, corresponding to the logarithm of the phase-space averaged divergence rate of classical trajectories and to the phase-space average of the logarithm, respectively. The difference appears to be more pronounced in the regime of low kicking strength K, where no classical chaos exists globally. In this case, the Lyapunov exponent quickly decreases as K→0, while the OTOC's growth rate may decrease much slower, showing a higher sensitivity to small chaotic islands in the phase space. We also show that the quantum correlator as a function of time exhibits a clear singularity at the Ehrenfest time t_{E}: transitioning from a time-independent value of t^{-1}lnC(t) at ttime at t>t_{E}. We note that the underlying physics here is the same as in the theory of weak (dynamical) localization [Aleiner and Larkin, Phys. Rev. B 54, 14423 (1996)PRBMDO0163-182910.1103/PhysRevB.54.14423; Tian, Kamenev, and Larkin, Phys. Rev. Lett. 93, 124101 (2004)PRLTAO0031-900710.1103/PhysRevLett.93.124101] and is due to a delay in the onset of quantum interference effects, which occur sharply at a time of the order of the Ehrenfest time.
First-order dissolution rate law and the role of surface layers in glass performance assessment
Grambow, B.; Müller, R.
2001-09-01
The first-order dissolution rate law is used for nuclear waste glass performance predictions since 1984. A first discussion of the role of saturation effects was initiated at the MRS conference that year. In paper (1) it was stated that "For glass dissolution A* (the reaction affinity) cannot become zero since saturation only involves the reacting surface while soluble elements still might be extracted from the glass" [B. Grambow, J. Mater. Res. Soc. Symp. Proc. 44 (1985) 15]. Saturation of silica at the surface and condensation of surface silanol groups was considered as being responsible for the slow down of reaction rates by as much as a factor of 1000. Precipitation of Si containing secondary phases such as quartz was invoked as a mechanism for keeping final dissolution affinities higher than zero. Another (2) paper [A.B. Barkatt, P.B. Macedo, B.C. Gibson, C.J. Montrose, J. Mater. Res. Soc. Symp. Proc. 44 (1985) 3] stated that "… under repository conditions the extent of glass dissolution will be moderate due to saturation with respect to certain major elements (in particular, Si, Al and Ca). Consequently, the concentration levels of the more soluble glass constituents in the aqueous medium are expected to fall appreciable below their solubility limit." The formation of dense surface layers was considered responsible for explaining the saturation effect. The mathematical model assumed stop of reaction in closed systems, once solubility limits were achieved. For more than 15 years the question of the correctness of one or the other concept has seldom been posed and has not yet been resolved. The need of repository performance assessment for validated rate laws demands a solution, particularly since the consequences of the two concepts and research requirements for the long-term glass behavior are quite different. In concept (1) the stability of the `equilibrium surface region' is not relevant because, by definition, this region is stable chemically and after a
2010-09-10
...] Amendment to Egg Research and Promotion Order and Regulations To Increase the Rate of Assessment and.... SUMMARY: This proposed rule would amend the Egg Research and Promotion Order (Order) to increase the assessment rate on egg producers paying assessments to the American Egg Board (AEB) from 10 cents to 15 cents...
Build to order and entry/exit strategies under exchange rate uncertainty
Directory of Open Access Journals (Sweden)
Lin Chin-Tsai
2004-01-01
Full Text Available Under uncertainty of exchange rate, we extend the build to order production model of Lin et al. (2002 by considering the export-oriented manufacturer to make decisions to switch production location freely between domestic and foreign ones. The export-oriented manufacturer is risk neutral and has rational expectations. When we transfer the production location from domestic (foreign to foreign (domestic, and the production location transferring cost and the drift of real exchange rate are both equal to zero, then the optimal entry and exit threshold value of Cobb-Douglas production function are equal, no matter whether we use real options or net present value method. Thus export-oriented manufacturer can make decisions at the optimal transfer threshold value for transferable locations wherever the production locations are. It provides the export-oriented manufacturer with another way of thinking.
High-Order Model and Dynamic Filtering for Frame Rate Up-Conversion.
Bao, Wenbo; Zhang, Xiaoyun; Chen, Li; Ding, Lianghui; Gao, Zhiyong
2018-08-01
This paper proposes a novel frame rate up-conversion method through high-order model and dynamic filtering (HOMDF) for video pixels. Unlike the constant brightness and linear motion assumptions in traditional methods, the intensity and position of the video pixels are both modeled with high-order polynomials in terms of time. Then, the key problem of our method is to estimate the polynomial coefficients that represent the pixel's intensity variation, velocity, and acceleration. We propose to solve it with two energy objectives: one minimizes the auto-regressive prediction error of intensity variation by its past samples, and the other minimizes video frame's reconstruction error along the motion trajectory. To efficiently address the optimization problem for these coefficients, we propose the dynamic filtering solution inspired by video's temporal coherence. The optimal estimation of these coefficients is reformulated into a dynamic fusion of the prior estimate from pixel's temporal predecessor and the maximum likelihood estimate from current new observation. Finally, frame rate up-conversion is implemented using motion-compensated interpolation by pixel-wise intensity variation and motion trajectory. Benefited from the advanced model and dynamic filtering, the interpolated frame has much better visual quality. Extensive experiments on the natural and synthesized videos demonstrate the superiority of HOMDF over the state-of-the-art methods in both subjective and objective comparisons.
Energy Technology Data Exchange (ETDEWEB)
1990-08-28
In the fall of 1989, ICG Utilities (Manitoba) Ltd. and Greater Winnipeg Gas Company (collectively referred to as the Company) applied to the Public Utilities Board for Interim Refundable Rate increases effective January 1, 1990. The Board was satisfied that the Company had proved a prima facie case for financial need and, accordingly, the Board approved rates on an interim basis to become effective on January 1, 1990. On March 1, 1990, the Company filed its General Rate Application with the Board on the basis of a 1989 mid-year historic test year with rates to be effective September 1, 1990. In the amended application, the Company sought the Board's approval to recover a total revenue deficiency of $17.0 million and earn an overall rate of return of 12.9%, which includes a requested return on shareholders' equity of 14%, an increase from 13% previously approved. The Company stated that absent confirmation of the interim rates and approval of increased rates effective September 1, 1990, the overall rate of return would be 8.2% which would yield a return on shareholders' equity of 2.27%. On an overall basis, the Board reduced the Company's requested increase in revenue requirement from 7.12% to 5.24%. Of the 5.24% increase allowed by the Board, 3.07% is currently being recovered through rates which took effect on January 1, 1990, and the remaining 2.17% increase is accommodated by this order. The Board also dealt with several other matters including the following: a change in the due date for bill payment; the Company's request for Board endorsement of a lock-off policy; the Company's capital expenditure program; the efficiencies in the Company's operations and capital program; and retroactive recovery of the revenue deficiency from January 1, 1990 to August 31,1990. 33 tabs.
International Nuclear Information System (INIS)
1992-01-01
In accordance with an order from the Manitoba Public Utilities Board, Manitoba Hydro's proposed schedule of rates effective April 1, 1992 is presented along with a revenue forecast. The rate schedule is divided into the following categories: residential rates, flat-rate water heating rates, small general service customers (not exceeding 200 kVA), large general service, general service cooking and heating rates, general service flat-rate water heating, and area and roadway lighting. Comparisons are made for all rate categories between present utility bills and bills under the proposed new rates. 10 tabs
Computerised Provider Order Entry Adoption Rates Favourably Impact Length of Stay
Directory of Open Access Journals (Sweden)
Richard Schreiber
2016-04-01
Full Text Available Background Research regarding return on investment for electronic health records (EHRs is sparse. Objective To extend previously established research and examine rigorously whether increasing the adoption of computer-based provider/prescriber order entry (CPOE leads to a decrease in length of stay (LOS, and to demonstrate that the two are inversely and bidirectionally proportional even while other efforts to decrease LOS are in place. Method The study assessed CPOE, LOS and case mix index (CMI data in a community hospital in the United States, using a mature and nearly fully deployed vendor product EHR. CPOE rates and LOS over 7 years were determined on a per-patient, per-visit and per-discipline basis and compared with concomitant CMI data. Results An inverse relationship of CPOE to LOS was correlated for 13 disciplines out of 19, and organisation wide for all disciplines combined during the first 5 years of study. During the subsequent 2 years, both CPOE and LOS plateaued, except in eight disciplines where CPOE rates at first declined and LOS concurrently rose slightly, and then returned to the baseline plateau levels. CMI increased during the entire period of evaluation. An inflection point at approximately 60% CPOE adoption predicted the greatest improvement in lowering of LOS. Conclusions Rising and falling rates of CPOE correlated with reductions and rises in LOS, respectively. CPOE appeared statistically to be an independent factor in affecting LOS, over and above other efforts to shorten LOS, thus contributing to lower costs and improved efficiency outcomes as measured by LOS, even as CMI rises.
75 FR 57912 - Boulder Canyon Project-Rate Order No. WAPA-150
2010-09-23
... by the Contractor's contingent capacity percentage as provided by contract. Forecast Rates Energy... existing formula, the rates for BCP electric service consist of a base charge, a capacity rate, and an energy rate. The provisional base charge is $75,182,522, the provisional capacity rate is $1.90 per...
Naugler, Christopher T; Guo, Maggie
2016-04-01
There is a need to develop and validate new metrics to access the appropriateness of laboratory test requests. The mean abnormal result rate (MARR) is a proposed measure of ordering selectivity, the premise being that higher mean abnormal rates represent more selective test ordering. As a validation of this metric, we compared the abnormal rate of lab tests with the number of tests ordered on the same requisition. We hypothesized that requisitions with larger numbers of requested tests represent less selective test ordering and therefore would have a lower overall abnormal rate. We examined 3,864,083 tests ordered on 451,895 requisitions and found that the MARR decreased from about 25% if one test was ordered to about 7% if nine or more tests were ordered, consistent with less selectivity when more tests were ordered. We then examined the MARR for community-based testing for 1,340 family physicians and found both a wide variation in MARR as well as an inverse relationship between the total tests ordered per year per physician and the physician-specific MARR. The proposed metric represents a new utilization metric for benchmarking relative selectivity of test orders among physicians. © American Society for Clinical Pathology, 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Jefferson, Tyrone; Herbst, Jeffrey H.; McCrae, Robert R.
1998-01-01
Sulloway (1996) proposed that personality traits developed in childhood mediate the association of birth order with scientific radicalism. Birth-order effects on traits within the five-factor model of personality were examined in three studies. Self-reports on brief measures of Neuroticism, Extraversion, and Openness in a national sample (N= 9664) were unrelated to birth order. Self-reports on the 30 facet scales of the Revised NEO Personality Inventory (NEO-PI-R) in an adult sample (N= 612) ...
Michaela Kreyenfeld; Rembrandt Scholz; Frederik Peters; Ines Wlosnewski
2011-01-01
Until 2008, Germany’s vital statistics did not include information on the biological order of each birth. This resulted in a dearth of important demographic indicators, such as the mean age at first birth and the level of childlessness. Researchers have tried to fill this gap by generating order-specific birth rates from survey data, and by combining survey data with vital statistics. This paper takes a different approach by using Perinatal Statistics to generate birth order-specific fertilit...
Rate-induced solubility and suppression of the first-order phase transition in olivine LiFePO4.
Zhang, Xiaoyu; van Hulzen, Martijn; Singh, Deepak P; Brownrigg, Alex; Wright, Jonathan P; van Dijk, Niels H; Wagemaker, Marnix
2014-05-14
The impact of ultrahigh (dis)charge rates on the phase transition mechanism in LiFePO4 Li-ion electrodes is revealed by in situ synchrotron diffraction. At high rates the solubility limits in both phases increase dramatically, causing a fraction of the electrode to bypass the first-order phase transition. The small transforming fraction demonstrates that nucleation rates are consequently not limiting the transformation rate. In combination with the small fraction of the electrode that transforms at high rates, this indicates that higher performances may be achieved by further optimizing the ionic/electronic transport in LiFePO4 electrodes.
15 CFR 700.13 - Acceptance and rejection of rated orders.
2010-01-01
... order and transmit the acceptance or rejection in writing (hard copy), or in electronic format, within... rejection, pursuant to paragraphs (b) and (c) of this section, in writing (hard copy) or electronic format...
Dynamics of a Fractional Order HIV Infection Model with Specific Functional Response and Cure Rate
Directory of Open Access Journals (Sweden)
Adnane Boukhouima
2017-01-01
Full Text Available We propose a fractional order model in this paper to describe the dynamics of human immunodeficiency virus (HIV infection. In the model, the infection transmission process is modeled by a specific functional response. First, we show that the model is mathematically and biologically well posed. Second, the local and global stabilities of the equilibria are investigated. Finally, some numerical simulations are presented in order to illustrate our theoretical results.
76 FR 8730 - Desert Southwest Customer Service Region-Rate Order No. WAPA-151
2011-02-15
... DEPARTMENT OF ENERGY Western Area Power Administration Desert Southwest Customer Service Region.... Jack Murray, Rates Manager, Desert Southwest Customer Service Region, Western Area Power Administration... ancillary service rates for the Desert Southwest Customer Service Region in accordance with section 302 of...
77 FR 34381 - Pacific Northwest-Pacific Southwest Intertie Project-Rate Order No. WAPA-157
2012-06-11
... factor of the rate increase is when the existing rates were developed, purchase power was handled at the... and comment period to be considered in Western's decision process. As access to Western facilities is... designed to recover an annual revenue requirement that includes operation and maintenance, purchase power...
76 FR 26324 - Order Making Fiscal Year 2012 Annual Adjustments to Section 31 Fee Rates
2011-05-06
... of x. 3. Calculate the mean and standard deviation of the series {[Delta] 1 , [Delta] 2... 2012 Annual Adjustments to Section 31 Fee Rates I. Background Section 31 of the Securities Exchange Act... the fee rates under Sections 31(b) and (c) of the Exchange Act in fiscal years 2002 through 2011. II...
Energy Technology Data Exchange (ETDEWEB)
Farzin Nejad, N., E-mail: Farzinnejadn@ripi.ir [Petroleum Refining Technology Development Division, Research Institute of Petroleum Industry, Tehran 14857-33111 (Iran, Islamic Republic of); Shams, E.; Amini, M.K. [Department of Chemistry, University of Isfahan, Isfahan 81746-73441 (Iran, Islamic Republic of)
2015-09-15
In this work, magnetic ordered mesoporous carbon adsorbent was synthesized using soft templating method to adsorb sulfur from model oil (dibenzothiophene in n-hexane). Through this research, pluronic F-127, resorcinol-formaldehyde and hydrated iron nitrate were respectively used as soft template, carbon source and iron source. The adsorbent was characterized by X-ray diffraction, nitrogen adsorption–desorption isotherm and transmission electron microscopy. Nitrogen adsorption–desorption measurement revealed the high surface area (810 m{sup 2} g{sup −1}), maxima pore size of 3.3 nm and large pore volume (1.01 cm{sup 3} g{sup −1}) of the synthesized sample. The adsorbent showed a maximum adsorption capacity of 111 mg dibenzothiophene g{sup −1} of adsorbent. Sorption process was described by the pseudo-second-order rate equation and could be better fitted by the Freundlich model, showing the heterogeneous feature of the adsorption process. In addition, the adsorption capacity of regenerated adsorbent was 78.6% of the initial level, after five regeneration cycles. - Highlights: • Adsorptive desulfurization of model oil with magnetic ordered mesoporous carbon adsorbent, Fe-OMC, was studied. • Maximum adsorption capacity (q{sub max}) of Fe-OMC for DBT was found to be 111.1 mg g{sup −1}. • Freundlich isotherm best represents the equilibrium adsorption data. • Rate of DBT adsorption process onto Fe-OMC is controlled by at least two steps.
International Nuclear Information System (INIS)
Farzin Nejad, N.; Shams, E.; Amini, M.K.
2015-01-01
In this work, magnetic ordered mesoporous carbon adsorbent was synthesized using soft templating method to adsorb sulfur from model oil (dibenzothiophene in n-hexane). Through this research, pluronic F-127, resorcinol-formaldehyde and hydrated iron nitrate were respectively used as soft template, carbon source and iron source. The adsorbent was characterized by X-ray diffraction, nitrogen adsorption–desorption isotherm and transmission electron microscopy. Nitrogen adsorption–desorption measurement revealed the high surface area (810 m 2 g −1 ), maxima pore size of 3.3 nm and large pore volume (1.01 cm 3 g −1 ) of the synthesized sample. The adsorbent showed a maximum adsorption capacity of 111 mg dibenzothiophene g −1 of adsorbent. Sorption process was described by the pseudo-second-order rate equation and could be better fitted by the Freundlich model, showing the heterogeneous feature of the adsorption process. In addition, the adsorption capacity of regenerated adsorbent was 78.6% of the initial level, after five regeneration cycles. - Highlights: • Adsorptive desulfurization of model oil with magnetic ordered mesoporous carbon adsorbent, Fe-OMC, was studied. • Maximum adsorption capacity (q max ) of Fe-OMC for DBT was found to be 111.1 mg g −1 . • Freundlich isotherm best represents the equilibrium adsorption data. • Rate of DBT adsorption process onto Fe-OMC is controlled by at least two steps
DEFF Research Database (Denmark)
Larsen, Christian; Thorstenson, Anders
The order fill rate is less commonly used than the volume fill rate (most often just denoted fill rate) as a performance measure for inventory control systems. However, in settings where the focus is on filling customer orders rather than total quantities, the order fill rate should be the prefer......The order fill rate is less commonly used than the volume fill rate (most often just denoted fill rate) as a performance measure for inventory control systems. However, in settings where the focus is on filling customer orders rather than total quantities, the order fill rate should...
Chen, Cheng-Meng; Zhang, Qiang; Huang, Chun-Hsien; Zhao, Xiao-Chen; Zhang, Bing-Sen; Kong, Qing-Qiang; Wang, Mao-Zhang; Yang, Yong-Gang; Cai, Rong; Sheng Su, Dang
2012-07-21
A three-dimensional bubble graphene film, with controllable and uniform macropores and tailorable microstructure, was fabricated by a facile hard templating strategy and exhibit extraordinary electrochemical capacitance with high rate capability (1.0 V s(-1)).
Orr, Philip T.; Willis, Anusuya; Burford, Michele A.
2018-04-01
Cyanobacteria are oxygenic photosynthetic Gram-negative bacteria that can form potentially toxic blooms in eutrophic and slow flowing aquatic ecosystems. Bloom toxicity varies spatially and temporally, but understanding the mechanisms that drive these changes remains largely a mystery. Changes in bloom toxicity may result from changes in intracellular toxin pool sizes of cyanotoxins with differing molecular toxicities, and/or from changes in the cell concentrations of toxic and non-toxic cyanobacterial species or strains within bloom populations. We show here how first-order rate kinetics at the cellular level can be used to explain how environmental conditions drive changes in bloom toxicity at the ecological level. First order rate constants can be calculated for changes in cell concentration (μ c: specific cell division rate) or the volumetric biomass concentration (μ g: specific growth rate) between short time intervals throughout the cell cycle. Similar first order rate constants can be calculated for changes in nett volumetric cyanotoxin concentration (μ tox: specific cyanotoxin production rate) over similar time intervals. How μ c (or μ g ) covaries with μ tox over the cell cycle shows conclusively when cyanotoxins are being produced and metabolised, and how the toxicity of cells change in response to environment stressors. When μ tox/μ c>1, cyanotoxin cell quotas increase and individual cells become more toxic because the nett cyanotoxin production rate is higher than the cell division rate. When μ tox/μ c=1, cell cyanotoxin quotas remains fixed because the nett cyanotoxin production rate matches the cell division rate. When μ tox/μ ccyanotoxin cell quota decreases because either the nett cyanotoxin production rate is lower than the cell division rate, or metabolic breakdown and/or secretion of cyanotoxins is occurring. These fundamental equations describe cyanotoxin metabolism dynamics at the cellular level and provide the necessary
2010-05-24
... accessed information for [Insert Number] issued securities and money market instruments through Internet... the arranger will, among other things, disclose on a password-protected Internet Web site the... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-62120; File No. S7-04-09] Order Granting...
2011-11-22
... accessed information for [Insert Number] issued securities and money market instruments through Internet... the arranger will, among other things, disclose on a password-protected Internet Web site the... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-65765; File No. S7-04-09] Order Extending...
2013-11-27
... relied upon that the arranger will, among other things, disclose on a password-protected Internet Web... SECURITIES AND EXCHANGE COMMISSION [Release No. 34-70919; File No. S7-04-09] Order Extending... of Rule 17g-5 Under the Securities Exchange Act of 1934 and Request for Comment November 22, 2013. I...
Next-to-next-leading order correction to 3-jet rate and event-shape ...
Indian Academy of Sciences (India)
The coupling constant, , was measured by two different methods: first by employing the three-jet observables. Combining all the data, the value of as at next-to-next leading order (NNLO) was determined to be 0.117 ± 0.004(hard) ± 0.006(theo). Secondly, from the event-shape distributions, the strong coupling constant, ...
Measurement and control of the frequency chirp rate of high-order harmonic pulses
International Nuclear Information System (INIS)
Mauritsson, J.; Johnsson, P.; Lopez-Martens, R.; Varju, K.; L'Huillier, A.; Kornelis, W.; Biegert, J.; Keller, U.; Gaarde, M.B.; Schafer, K.J.
2004-01-01
We measure the chirp rate of harmonics 13 to 23 in argon by cross correlation with a 12 femtosecond probe pulse. Under low ionization conditions, we directly measure the negative chirp due to the atomic dipole phase, and show that an additional chirp on the pump pulse is transferred to the qth harmonic as q times the fundamental chirp. Our results are in accord with simulations using the experimentally measured 815 nm pump and probe pulses. The ability to measure and manipulate the harmonic chirp rate is essential for the characterization and optimization of attosecond pulse trains
78 FR 54934 - Order Making Fiscal Year 2014 Annual Adjustments to Registration Fee Rates
2013-09-06
... U.S.C. 77f(b). \\2\\ 15 U.S.C. 78m(e). \\3\\ 15 U.S.C. 78n(g). The Investor and Capital Markets Fee... first order moving average model [Delta] t = [alpha] + [beta]e t-1 + e t , where e t denotes the... - [alpha] - [beta]e t-1 . The model can be estimated using standard commercially available software. Using...
78 FR 56692 - Colorado River Storage Project-Rate Order No. WAPA-161
2013-09-13
... existing Salt Lake City Area Integrated Projects (SLCA/IP) Firm Power Rate and the Colorado River Storage...-6372, email [email protected] , or Mr. Rodney Bailey, Power Marketing Manager, CRSP Management Center...: Western Area Power Administration Temporary Extension for Salt Lake City Area Integrated Projects Firm...
2012-11-29
... prescribed in paragraph (a)(1) (i.e., disclosed the type of conflict of interest in Exhibit 6 to Form NRSRO... (c) of Rule 17g-5 specifically prohibits seven types of conflicts of interest. Consequently, an NRSRO... conflicts of interest arising from the business of determining credit ratings.\\6\\ Paragraph (a) of Rule 17g...
75 FR 38516 - Order on Intent To Revoke Market-Based Rate Authority
2010-07-02
..., Electric Quarterly Reports, Strategic Energy Management Corp., Solaro Energy Marketing Corporation. 1... (including market-based power sales, cost-based power sales, and transmission service) and providing transaction information (including rates) for short-term and long-term power sales during the most recent...
Determination of rate constants in second-order kinetics using UV-visible spectroscopy
Bijlsma, S.; Boelens, H. F. M.; Smilde, A. R.
2001-01-01
A general method for estimating reaction rate constants of chemical reactions using ultraviolet-visible (UV-vis) spectroscopy is presented. The only requirement is that some of the chemical components involved be spectroscopically active. The method uses the combination of spectroscopic measurements
A Systematic Review of Tools to Measure Respiratory Rate in Order to Identify Childhood Pneumonia.
Ginsburg, Amy Sarah; Lenahan, Jennifer L; Izadnegahdar, Rasa; Ansermino, J Mark
2018-05-01
Pneumonia is the leading infectious cause of death in children worldwide, with most deaths occurring in developing countries. Measuring respiratory rate is critical to the World Health Organization's guidelines for diagnosing childhood pneumonia in low-resource settings, yet it is difficult to accurately measure. We conducted a systematic review to landscape existing respiratory rate measurement technologies. We searched PubMed, Embase, and Compendex for studies published through September 2017 assessing the accuracy of respiratory rate measurement technologies in children. We identified 16 studies: 2 describing manual devices and 14 describing automated devices. Although both studies describing manual devices took place in low-resource settings, all studies describing automated devices were conducted in well-resourced settings. Direct comparison between studies was complicated by small sample size, absence of a consistent reference standard, and variations in comparison methodology. There is an urgent need for affordable and appropriate innovations that can reliably measure a child's respiratory rate in low-resource settings. Accelerating development or scale-up of these technologies could have the potential to advance childhood pneumonia diagnosis worldwide.
78 FR 19700 - Pacific Northwest-Pacific Southwest Intertie Project-Rate Order No. WAPA-157
2013-04-02
... the proposed rates. Response: These costs are associated with the PPW program for Western's BA in the... program, including required reserves, and will work collaboratively with customers as additional... by the service agreement or contract. Adjustments for Reactive Power: There shall be no entitlement...
International Nuclear Information System (INIS)
1998-01-01
The Ontario government is restructuring the electric power industry by introducing competition to the generation and retailing sectors, as well as to the transmission and distribution sectors within the industry. This application marks the beginning of the regulation of the Ontario Hydro Services Company Inc.'s (OHSC) transmission business by the Ontario Energy Board (OEB). The OHSC has asked the OEB to approve a revenue requirement for the transmission business and rates derived from the revenue requirement for unbundled transmission services to customers for the year 1999. For the year 2000, the OHSC asked the OEB to approve the performance-based regulation mechanism and the transmission rates derived from that mechanism. This document includes the actual text of the application and provides the justification for the $1,327 million revenue requirement for 1999 and the PBR framework forecast of $ 1,291 million for the year 2000. tabs., figs
Directory of Open Access Journals (Sweden)
Rakesh Prakash Tripathi
2014-05-01
Full Text Available In paper (2004 Chang studied an inventory model under a situation in which the supplier provides the purchaser with a permissible delay of payments if the purchaser orders a large quantity. Tripathi (2011 also studied an inventory model with time dependent demand rate under which the supplier provides the purchaser with a permissible delay in payments. This paper is motivated by Chang (2004 and Tripathi (2011 paper extending their model for exponential time dependent demand rate. This study develops an inventory model under which the vendor provides the purchaser with a credit period; if the purchaser orders large quantity. In this chapter, demand rate is taken as exponential time dependent. Shortages are not allowed and effect of the inflation rate has been discussed. We establish an inventory model for deteriorating items if the order quantity is greater than or equal to a predetermined quantity. We then obtain optimal solution for finding optimal order quantity, optimal cycle time and optimal total relevant cost. Numerical examples are given for all different cases. Sensitivity of the variation of different parameters on the optimal solution is also discussed. Mathematica 7 software is used for finding numerical examples.
Goshvarpour, Ateke; Goshvarpour, Atefeh
2013-02-01
The human heartbeat is one of the important examples of complex physiologic fluctuations. For the first time in this study higher order spectra of heart rate signals during meditation have explored. Specifically, the aim of this study was to analysis and compares the contribution of quadratic phase coupling of human heart rate variability during two forms of meditation: (1) Chinese Chi (or Qigong) meditation and (2) Kundalini Yoga meditation. For this purpose, Bispectrum was estimated by using biased, parametric and the direct (FFT) method. The results show that the mean Bispectrum magnitude of heart rate signals increased during Kundalini Yoga meditation, but it decreased significantly during Chi meditation. However, in both meditation techniques phase-coupled harmonics are shifted to the higher frequencies during meditation. In addition, it has shown that not only there are significant differences between rest and meditation states, but also heart rate patterns appear to be influenced by different types of meditation.
Larsen, Christian; Thorstenson, Anders
2006-01-01
The order fill rate is less commonly used than the volume fill rate (most often just denoted fill rate) as a performance measure for inventory control systems. However, in settings where the focus is on filling customer orders rather than total quantities, the order fill rate should be the preferred measure. In this paper we consider a continuous review, base-stock policy, where all replenishment orders have the same constant lead time and all unfilled demands are backordered. We develop exac...
DEFF Research Database (Denmark)
Nielsen, P.H.; Bjerg, P.L.; Nielsen, P.
1996-01-01
In situ microcosms (ISM) and laboratory batch microcosms (LBM) were used for determination of the first-order degradation rate constants of benzene, toluene, o-xylene, nitrobenzene, naphthalene, biphenyl, o- and p-dichlorobenzene, 1,1,1 -trichloroethane, tetrachlorometane, trichloroethene......, tetrachloroethene, phenol, o-cresol, 2,4- and 2,6-dichlorophenol, 4,6-o-dichlorocresol, and o- and p-nitrophenol in an aerobic aquifer, All aromatic hydrocarbons were degraded in ISM and LBM experiments. The phenolic hydrocarbons were ail degraded in ISM experiments, but some failed to degrade in LBM experiments....... Chlorinated aliphatic hydrocarbons were degraded neither in ISM nor LBM experiments. Degradation rate constants were determined by a model accounting for kinetic sorption (bicontinuum model), lag phases, and first-order degradation. With a few exceptions, lag phases were less than 2 weeks in both ISM and LBM...
Farzin Nejad, N.; Shams, E.; Amini, M. K.
2015-09-01
In this work, magnetic ordered mesoporous carbon adsorbent was synthesized using soft templating method to adsorb sulfur from model oil (dibenzothiophene in n-hexane). Through this research, pluronic F-127, resorcinol-formaldehyde and hydrated iron nitrate were respectively used as soft template, carbon source and iron source. The adsorbent was characterized by X-ray diffraction, nitrogen adsorption-desorption isotherm and transmission electron microscopy. Nitrogen adsorption-desorption measurement revealed the high surface area (810 m2 g-1), maxima pore size of 3.3 nm and large pore volume (1.01 cm3 g-1) of the synthesized sample. The adsorbent showed a maximum adsorption capacity of 111 mg dibenzothiophene g-1 of adsorbent. Sorption process was described by the pseudo-second-order rate equation and could be better fitted by the Freundlich model, showing the heterogeneous feature of the adsorption process. In addition, the adsorption capacity of regenerated adsorbent was 78.6% of the initial level, after five regeneration cycles.
Xu, Kuipeng; Tang, Xianghai; Wang, Lu; Yu, Xinzi; Sun, Peipei; Mao, Yunxiang
2017-08-01
Bangiales is the only order of the Bangiophyceae and has been suggested to be monophyletic. This order contains approximately 190 species and is distributed worldwide. Previous molecular studies have produced robust phylogenies among the red algae, but the divergence times, historical biogeography and evolutionary rates of Bangiales have rarely been studied. Phylogenetic relationships within the Bangiales were examined using the concatenated gene sets from all available organellar genomes. This analysis has revealed the topology ((( Bangia, Porphyra ) Pyropia ) Wildemania ). Molecular dating indicates that Bangiales diversified approximately 246.40 million years ago (95% highest posterior density (HPD)= 194.78u2013318.24 Ma, posterior probability (PP)=0.99) in the Late Permian and Early Triassic, and that the ancestral species most likely originated from eastern Gondwanaland (currently New Zealand and Australia) and subsequently began to spread and evolve worldwide. Based on pairwise comparisons, we found a slower rate of nucleotide substitutions and lower rates of diversification in Bangiales relative to Florideophyceae. Compared with Viridiplantae (green algae and land plants), the evolutionary rates of Bangiales and other Rhodophyte groups were found to be dramatically faster, by more than 3-fold for plastid genome (ptDNA) and 15-fold for mitochondrial genome (mtDNA). In addition, an average 2.5-fold lower dN/dS was found for the algae than for the land plants, which indicates purifying selection of the algae.
Schröder, Henning; Sawall, Mathias; Kubis, Christoph; Selent, Detlef; Hess, Dieter; Franke, Robert; Börner, Armin; Neymeyr, Klaus
2016-07-13
If for a chemical reaction with a known reaction mechanism the concentration profiles are accessible only for certain species, e.g. only for the main product, then often the reaction rate constants cannot uniquely be determined from the concentration data. This is a well-known fact which includes the so-called slow-fast ambiguity. This work combines the question of unique or non-unique reaction rate constants with factor analytic methods of chemometrics. The idea is to reduce the rotational ambiguity of pure component factorizations by considering only those concentration factors which are possible solutions of the kinetic equations for a properly adapted set of reaction rate constants. The resulting set of reaction rate constants corresponds to those solutions of the rate equations which appear as feasible factors in a pure component factorization. The new analysis of the ambiguity of reaction rate constants extends recent research activities on the Area of Feasible Solutions (AFS). The consistency with a given chemical reaction scheme is shown to be a valuable tool in order to reduce the AFS. The new methods are applied to model and experimental data. Copyright © 2016 Elsevier B.V. All rights reserved.
Maghrabi, Mufeed; Al-Abdullah, Tariq; Khattari, Ziad
2018-03-24
The two heating rates method (originally developed for first-order glow peaks) was used for the first time to evaluate the activation energy (E) from glow peaks obeying mixed-order (MO) kinetics. The derived expression for E has an insignificant additional term (on the scale of a few meV) when compared with the first-order case. Hence, the original expression for E using the two heating rates method can be used with excellent accuracy in the case of MO glow peaks. In addition, we derived a simple analytical expression for the MO parameter. The present procedure has the advantage that the MO parameter can now be evaluated using analytical expression instead of using the graphical representation between the geometrical factor and the MO parameter as given by the existing peak shape methods. The applicability of the derived expressions for real samples was demonstrated for the glow curve of Li 2 B 4 O 7 :Mn single crystal. The obtained parameters compare very well with those obtained by glow curve fitting and with the available published data.
Lou, Shuaifeng; Cheng, Xinqun; Wang, Long; Gao, Jinlong; Li, Qin; Ma, Yulin; Gao, Yunzhi; Zuo, Pengjian; Du, Chunyu; Yin, Geping
2017-09-01
Orthorhombic Niobium oxide (T-Nb2O5) has been regarded as a promising anode material for high-rate lithium ion batteries (LIBs) due to its potential to operate at high rates with improved safety and high theoretical capacity of 200 mA h g-1. Herein, three-dimensionally ordered macroporous (3DOM) T-Nb2O5, with mesoporous hierarchical structure, was firstly prepared by a simple approach employing self-assembly polystyrene (PS) microspheres as hard templates. The obtained T-Nb2O5 anode material presents obvious and highly-efficiency pseudocapacitive Li+ intercalation behaviour, which plays a dominant role in the kinetics of electrode process. As a result, rapid Li+ intercalation/de-intercalation are achieved, leading to excellent rate capability and long cycle life. The 3DOM T-Nb2O5 shows a remarkable high capacity of 106 and 77 mA h g-1 at the rate of 20C and 50C. The work presented herein holds great promise for future design of material structure, and demonstrates the great potential of T-Nb2O5 as a practical high-rate anode material for LIBs.
Sutter, Eli A; Sutter, Peter W
2014-12-03
In-situ liquid cell transmission and scanning transmission electron microscopy (TEM/STEM) experiments are important, as they provide direct insight into processes in liquids, such as solution growth of nanoparticles, among others. In liquid cell TEM/STEM redox reaction experiments, the hydrated electrons e(-)aq created by the electron beam are responsible for the reduction of metal-ion complexes. Here we investigate the rate equation of redox reactions involving reduction by e(-)aq generated by the electron beam during in situ liquid TEM/STEM. Specifically we consider the growth of Pd on Au seeds in aqueous solutions containing Pd-chloro complexes. From the quantification of the rate of Pd deposition at different electron beam currents and as a function of distance from a stationary, nanometer-sized exciting beam, we determine that the reaction is first order with respect to the concentration of hydrated electrons, [e(-)aq]. By comparing Pd- and Au-deposition, we further demonstrate that measurements of the local deposition rate on nanoparticles in the solution via real-time imaging can be used to measure not only [e(-)aq] but also the rate of reduction of a metal-ion complex to zerovalent metal atoms in solution.
DEFF Research Database (Denmark)
Larsen, Christian; Thorstenson, Anders
2008-01-01
The order fill rate (OFR) is sometimes suggested as an alternative to the volume fill rate (VFR) (most often just denoted fill rate) as a performance measure for inventory control systems. We consider a continuous review, base-stock policy, where replenishment orders have a constant lead time...
Directory of Open Access Journals (Sweden)
T. William Bentley
2015-05-01
Full Text Available Hydrolyses of acid derivatives (e.g., carboxylic acid chlorides and fluorides, fluoro- and chloroformates, sulfonyl chlorides, phosphorochloridates, anhydrides exhibit pseudo-first order kinetics. Reaction mechanisms vary from those involving a cationic intermediate (SN1 to concerted SN2 processes, and further to third order reactions, in which one solvent molecule acts as the attacking nucleophile and a second molecule acts as a general base catalyst. A unified framework is discussed, in which there are two reaction channels—an SN1-SN2 spectrum and an SN2-SN3 spectrum. Third order rate constants (k3 are calculated for solvolytic reactions in a wide range of compositions of acetone-water mixtures, and are shown to be either approximately constant or correlated with the Grunwald-Winstein Y parameter. These data and kinetic solvent isotope effects, provide the experimental evidence for the SN2-SN3 spectrum (e.g., for chloro- and fluoroformates, chloroacetyl chloride, p-nitrobenzoyl p-toluenesulfonate, sulfonyl chlorides. Deviations from linearity lead to U- or V-shaped plots, which assist in the identification of the point at which the reaction channel changes from SN2-SN3 to SN1-SN2 (e.g., for benzoyl chloride.
International Nuclear Information System (INIS)
Dong, B; Ding, G H; Lei, X L
2015-01-01
A general theoretical formulation for the effect of a strong on-site Coulomb interaction on the time-dependent electron transport through a quantum dot under the influence of arbitrary time-varying bias voltages and/or external fields is presented, based on slave bosons and the Keldysh nonequilibrium Green's function (GF) techniques. To avoid the difficulties of computing double-time GFs, we generalize the propagation scheme recently developed by Croy and Saalmann to combine the auxiliary-mode expansion with the celebrated Lacroix's decoupling approximation in dealing with the second-order correlated GFs and then establish a closed set of coupled equations of motion, called second-order quantum rate equations (SOQREs), for an exact description of transient dynamics of electron correlated tunneling. We verify that the stationary solution of our SOQREs is able to correctly describe the Kondo effect on a qualitative level. Moreover, a comparison with other methods, such as the second-order von Neumann approach and Hubbard-I approximation, is performed. As illustrations, we investigate the transient current behaviors in response to a step voltage pulse and a harmonic driving voltage, and linear admittance as well, in the cotunneling regime. (paper)
Energy Technology Data Exchange (ETDEWEB)
Hao, Yanna; Wu, Chao, E-mail: wuchao27@126.com; Zhao, Zongzhe; Zhao, Ying; Xu, Jie; Qiu, Yang; Jiang, Jie; Yu, Tong; Ma, Chunyu; Zhou, Buyun
2016-01-01
In this study, silica nanospheres with different particle sizes were used as hard template for synthesis of a starch with a novel three-dimensional ordered macroporous structure (3DOMTS). As a pharmaceutical adjuvant, 3DOMTS was used to improve the dissolution rate and oral relative bioavailability of water-insoluble drugs. Felodipine (FDP) was chosen as a model drug and was loaded into the 3DOMTS by solvent evaporation. FDP loading into 3DOMTS with different pore sizes was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), differential scanning calorimeter (DSC), powder X-ray diffractometer (PXRD) and Fourier-Transform Infrared (FTIR). The results obtained showed that FDP was present in the pores in an amorphic or microcrystalline state. The in vitro dissolution results showed that 3DOMTS could effectively improve the dissolution rate of FDP in comparison with commercial common tablets. Pharmacokinetic results indicated that the oral relative bioavailability of self-made FDP–3DOMTS tablets were 184%, showing that 3DOMTS produced a significantly increased oral absorption of FDP. In conclusion, 3DOMTS exhibits the dual potential of improving the dissolution rate of poorly water soluble drugs and the novel filler produced by direct compression technology confirming that 3DOMTS will be useful for many applications in the field of pharmaceutics. - Highlights: • We successfully prepared a starch with a novel three-dimensional ordered macroporous structure (3DOMTS). • 3DOMTS can suppress the crystallinity of the drug to maintain it at amorphous state. • In vivo and in vitro experiments proved that 3DOMTS can improve the solubility and bioavailability of felodipine.
Bona, Zachée; Nganso, Hugues Merlain Tetchou; Ekogo, Thierry Blanchard; Njock, Moïse Godfroy Kwato
2014-02-01
A fully relativistic multipole scheme is formulated to study two-photon emission processes in hydrogenlike ions with an infinitely heavy, pointlike, and spinless nucleus of charge up to 100. By making use of the Sturmian expansion of the Dirac-Coulomb Green function of the first order constructed by Szmytkowski, closed-form expressions are derived for arbitrary multipole channels. In the nonrelativistic limit, well-known formulas established previously are retrieved. For the sake of assessing the effectiveness of our approach, numerical applications are then carried out for two-photon decay rates of the selected 2s1/2 and 2p1/2 atomic states. To this end, radial integrals, the most crucial quantities involved in the matrix elements, are treated with great care by means of two suitable techniques that agree with each other quite closely so that very accurate values are obtained regardless of the choice of parameters, such as radial quantum numbers and orders of spherical Bessel functions of the first kind. In addition, the convergence and stability of computations are checked in connection with the intermediate-state summation, which appears within the second-order perturbation theory. As expected, the gauge invariance of our fully relativistic multipole numbers is confirmed. Relativistic effects, and the influence of the negative spectrum of the complete set of Dirac-Coulomb Sturmians of first order and retardation truncations in the transition operator are examined. Finally, a comparison is undertaken of our two-photon relativistic calculations with refined predictions of other authors based on finite basis-set methods widely employed over the past decades.
Cabasse, Amélie; Machinet, Guillaume; Dubrouil, Antoine; Cormier, Eric; Constant, Eric
2012-11-15
High-repetition-rate sources are very attractive for high-order harmonic generation (HHG). However, due to their pulse characteristics (low energy, long duration), those systems require a tight focusing geometry to achieve the necessary intensity to generate harmonics. In this Letter, we investigate theoretically and experimentally the optimization of HHG in this geometry, to maximize the extreme UV (XUV) photon flux and improve the conversion efficiency. We analyze the influence of atomic gas media (Ar, Kr, or Xe), gas pressure, and interaction geometries (a gas jet and a finite and a semi-infinite gas cell). Numerical simulations allow us to define optimal conditions for HHG in this tight focusing regime and to observe the signature of on-axis phase matching. These conditions are implemented experimentally using a high-repetition-rate Yb-doped fiber laser system. We achieve optimization of emission with a recorded XUV photon flux of 4.5×10(12) photons/s generated in Xe at 100 kHz repetition rate.
Energy Technology Data Exchange (ETDEWEB)
Favorite, Jeffrey A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
2016-11-21
SENSMG is a tool for computing first-order sensitivities of neutron reaction rates, reaction-rate ratios, leakage, k_{eff}, and α using the PARTISN multigroup discrete-ordinates code. SENSMG computes sensitivities to all of the transport cross sections and data (total, fission, nu, chi, and all scattering moments), two edit cross sections (absorption and capture), and the density for every isotope and energy group. It also computes sensitivities to the mass density for every material and derivatives with respect to all interface locations. The tool can be used for one-dimensional spherical (r) and two-dimensional cylindrical (r-z) geometries. The tool can be used for fixed-source and eigenvalue problems. The tool implements Generalized Perturbation Theory (GPT) as discussed by Williams and Stacey. Section II of this report describes the theory behind adjoint-based sensitivities, gives the equations that SENSMG solves, and defines the sensitivities that are output. Section III describes the user interface, including the input file and command line options. Section IV describes the output. Section V gives some notes about the coding that may be of interest. Section VI discusses verification, which is ongoing. Section VII lists needs and ideas for future work. Appendix A lists all of the input files whose results are presented in Sec. VI.
Lemos, Sandro; Figueiredo, Tiago; Marques, Silvio; Leite, Thalita; Cardozo, Diogo; Willardson, Jeffrey M; Simão, Roberto
2018-01-01
This study compared the effect of a strength training session performed at different exercise orders and rest intervals on blood pressure and heart rate variability (HRV). Fifteen trained men performed different upper body exercise sequences [large to small muscle mass (SEQA) and small to large muscle mass (SEQB)] in randomized order with rest intervals between sets and exercises of 40 or 90 seconds. Fifteen repetition maximum loads were tested to control the training intensity and the total volume load. The results showed, significant reductions for systolic blood pressure (SBP) for all sequences compared to baseline and, post-exercise: SEQA90 at 20, 30, 40, 50 and 60 minutes; SEQA40 and SEQB40 at 20 minutes and SEQB90 at 10, 20, 30, 40, 50 and 60 minutes. For diastolic blood pressure (DBP), significant reductions were found for three sequences compared to baseline and, post-exercise: SEQA90 and SEQA40 at 50 and 60 minutes; SEQB40 at 10, 30 and 60 minutes. For HRV, there were significant differences in frequency domain for all sequences compared to baseline. In conclusion, when performing upper body strength training sessions, it is suggested that 90 second rest intervals between sets and exercises promotes a post-exercise hypotensive response in SBP. The 40 second rest interval between sets and exercises was associated with greater cardiac stress, and might be contraindicated when working with individuals that exhibit symptoms of cardiovascular disease.
Energy Technology Data Exchange (ETDEWEB)
None
1982-08-01
This publication contains the power and transmission rate orders and related documents issued by the Department of Energy. It covers calendar years 1980 and 1981. The first publication, DOE/CE-007 covering the period from March through December 1979, was published July 1981. This publication is a compilation of all rate orders issued by the Assistant Secretary for Resource Applications and the Assistant Secretary for Conservation and Renewable Energy during calendar years 1980 and 1981 under Delegation Order No. 0204-33. It also includes all final approvals, remands, and disapprovals by the FERC, and a petition to the FERC for reconsideration by a Power Marketing Administration during 1980 and 1981. Also included are two delegation orders along with an amendment and a supplement to one delegation order, a departmental order on financial reporting, and Power and Transmission Rate Adjustment Procedures relating to federal power marketing.
International Nuclear Information System (INIS)
2006-04-01
This order fixes the return rate on the investments capital of electric power production in non connected areas, used for the calculation of the compensation expenses of the electric utilities. (A.L.B.)
International Nuclear Information System (INIS)
Huang, Zhijie; Shi, Yu.
2012-01-01
We present a general model-independent formalism of measuring CP and CPT violating parameters through time-ordered integrated rates of correlated decays of C=±1 entangled states of neutral pseudoscalar mesons. We give the general formulae of CP and CPT violating parameters in terms of four measurable asymmetries defined for the time-ordered integrated rates, applicable to all kinds of decay product. Two special cases which are often realized in experiments are discussed specifically. (orig.)
DEFF Research Database (Denmark)
Larsen, Christian
We consider a base stock inventory control system serving two customer classes whose demands are generated by two independent compound renewal processes. We show how to derive order and volume fill rates of each class. Based on assumptions about first order stochastic dominance we prove when one...
2010-03-04
... of x. 3. Calculate the mean and standard deviation of the series {[Delta] 1 , [Delta] 2...(j)(2) of the Exchange Act requires the Commission to issue an order adjusting the fee rates under... Adjusted Rate Section 31(j)(4)(B) of the Exchange Act provides that a mid-year adjustment shall take effect...
Second-Rate Coverage of Second-Order Elections: Czech and Slovak Elections to the EP in the Media
Directory of Open Access Journals (Sweden)
Jan Kovář
2010-12-01
Full Text Available Elections to the European Parliament (EP are considered second-order national elections (SOE. The SOE model suggests that there is a qualitative difference between different types of elections depending on the perception of what is at stake. Compared to first order elections, in second order elections there is less at stake because they do not determine the composition of government. Given that voters behave differently in second-order elections, the question arises: do the media also consider second-order elections less interesting and therefore devote to them less coverage? The media play a crucial role in informing citizens about such events as elections; they function as intermediaries between the electorate and the political arena. However, little is known about how EU issues are covered in the media, particularly in the new EU member states. Conducting a content analysis and applying the second-order election model, this paper analyses TV news coverage of the 2004 and 2009 European elections in the Czech Republic and Slovakia in a comparative fashion. The findings are discussed in the light of existing research literature on the EU’s legitimacy as well as its alleged democratic and communication deficit, not least because the EU relies on the media in strengthening (albeit indirectly its legitimacy by increasing citizen awareness of its activities.
Cooling rate dependence of structural order in Al{sub 90}Sm{sub 10} metallic glass
Energy Technology Data Exchange (ETDEWEB)
Sun, Yang [Hefei National Laboratory for Physical Sciences at the Microscale and Department of Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Ames Laboratory, US Department of Energy, Ames, Iowa 50011 (United States); Zhang, Yue; Zhang, Feng, E-mail: fzhang@ameslab.gov; Ye, Zhuo [Ames Laboratory, US Department of Energy, Ames, Iowa 50011 (United States); Ding, Zejun [Hefei National Laboratory for Physical Sciences at the Microscale and Department of Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Wang, Cai-Zhuang [Ames Laboratory, US Department of Energy, Ames, Iowa 50011 (United States); Department of Physics, Iowa State University, Ames, Iowa 50011 (United States); Ho, Kai-Ming [Hefei National Laboratory for Physical Sciences at the Microscale and Department of Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Ames Laboratory, US Department of Energy, Ames, Iowa 50011 (United States); Department of Physics, Iowa State University, Ames, Iowa 50011 (United States); International Center for Quantum Design of Functional Materials (ICQD), and Synergetic Innovation Center of Quantum Information and Quantum Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China)
2016-07-07
The atomic structure of Al{sub 90}Sm{sub 10} metallic glass is studied using molecular dynamics simulations. By performing a long sub-T{sub g} annealing, we developed a glass model closer to the experiments than the models prepared by continuous cooling. Using the cluster alignment method, we found that “3661” cluster is the dominating short-range order in the glass samples. The connection and arrangement of “3661” clusters, which define the medium-range order in the system, are enhanced significantly in the sub-T{sub g} annealed sample as compared with the fast cooled glass samples. Unlike some strong binary glass formers such as Cu{sub 64.5}Zr{sub 35.5}, the clusters representing the short-range order do not form an interconnected interpenetrating network in Al{sub 90}Sm{sub 10,} which has only marginal glass formability.
Damage rates in neutron irradiated FeCo and FeCo2V ordered and disordered alloys
International Nuclear Information System (INIS)
Riviere, J.P.; Dinhut, J.F.
1979-01-01
Ordered and disordered samples of FeCo and FeCo2V alloys have been irradiated at liquid hydrogen temperature with fission neutrons up to an integrated dose of about 7.2 x 10 17 n/cm 2 (E > 1 MeV). During the irradiation, the resistivity increases continuously due to point defect production. (author)
M. Kreyenfeld (Michaela); Scholz, R. (Rembrandt); F. Peters (Frederick); Wlosnewski, I. (Ines)
2010-01-01
textabstractUntil 2008, Germany's vital statistics did not include information on the biological order of each birth. This resulted in a dearth of important demographic indicators, such as the mean age at first birth and the level of childlessness. Researchers have tried to fill this gap by
Ratings of self and parents by youth: are they affected by family status, gender, and birth order?
Parish, T S
1991-01-01
In the present study, 648 youths from across the state of Kansas voluntarily evaluated themselves and their parents using the Personal Attribute Inventory for Children. Self-concept was found to be significantly higher for those from intact families in comparison with those from divorced remarried families. Evaluations of mothers were significantly higher for those from intact and divorced nonremarried families as compared with those from divorced remarried families. The ratings of fathers by youths from intact families were significantly more favorable than the ratings by those from either divorced nonremarried or divorced remarried families. Interestingly, gender by family status two-way interaction effects were also found for self-concept and ratings of fathers. Possible explanations for these findings, and their implications, are discussed.
2011-09-13
... of transmission was included in the Point-to-Point Transmission Service, Rate Schedules L- FPT1 and L... integrates resource plans ahead of time, maintains load- interchange-generation balance within a Balancing... Allocation Criteria (Marketing Plan). Firm Point-to-Point Transmission The highest priority Service...
2011-10-03
... of transmission was included in the Point-to-Point Transmission Service, Rate Schedules L- FPT1 and L... integrates resource plans ahead of time, maintains load-interchange- generation balance within a Balancing... Allocation Criteria (Marketing Plan). Firm Point-to-Point Transmission The highest priority transmission...
2011-09-20
... Exchange Act of 1934 (``Exchange Act'') prohibits a nationally recognized statistical rating organization... traditionally has operated mainly under the ``subscriber-paid'' business model, in which the NRSRO derives its... Act'') as set forth in the Report of the Senate Committee on Banking, Housing, and Urban Affairs...
2013-10-23
... the obligation to follow a voltage schedule.'' \\19\\ The Commission distinguished Hot Spring Power Co..., to explore the mechanics of public utilities filing reactive power rate schedules for which there is...'' jurisdictional service and, accordingly, must be filed for Commission review); Sulphur Springs Valley Elec. Coop...
Larsen, Christian
2006-01-01
We consider a base stock inventory control system serving two customer classes whose demands are generated by two independent compound renewal processes. We show how to derive order and volume fill rates of each class. Based on assumptions about first order stochastic dominance we prove when one customer class will get the best service. That theoretical result is validated through a series of numerical experiments which also reveal that it is quite robust.
Lee, Sunghee; McClain, Colleen; Webster, Noah; Han, Saram
2016-10-01
This study examines the effect of question context created by order in questionnaires on three subjective well-being measures: life satisfaction, self-rated health, and subjective life expectancy. We conducted two Web survey experiments. The first experiment (n = 648) altered the order of life satisfaction and self-rated health: (1) life satisfaction asked immediately after self-rated health; (2) self-rated health immediately after life satisfaction; and (3) two items placed apart. We examined their correlation coefficient by experimental condition and further examined its interaction with objective health. The second experiment (n = 479) asked life expectancy before and after parental mortality questions. Responses to life expectancy were compared by order using ANOVA, and we examined interaction with parental mortality status using ANCOVA. Additionally, response time and probes were examined. Correlation coefficients between self-rated health and life satisfaction differed significantly by order: 0.313 (life satisfaction first), 0.508 (apart), and 0.643 (self-rated health first). Differences were larger among respondents with chronic conditions. Response times were the shortest when self-rated health was asked first. When life expectancy asked after parental mortality questions, respondents reported considering parents more for answering life expectancy; and respondents with deceased parents reported significantly lower expectancy, but not those whose parents were alive. Question context effects exist. Findings suggest placing life satisfaction and self-rated health apart to avoid artificial attenuation or inflation in their association. Asking about parental mortality prior to life expectancy appears advantageous as this leads respondents to consider parental longevity more, an important factor for true longevity.
Goldberg, D; Kallan, M J; Fu, L; Ciccarone, M; Ramirez, J; Rosenberg, P; Arnold, J; Segal, G; Moritsugu, K P; Nathan, H; Hasz, R; Abt, P L
2017-12-01
The shortage of deceased-donor organs is compounded by donation metrics that fail to account for the total pool of possible donors, leading to ambiguous donor statistics. We sought to assess potential metrics of organ procurement organizations (OPOs) utilizing data from the Nationwide Inpatient Sample (NIS) from 2009-2012 and State Inpatient Databases (SIDs) from 2008-2014. A possible donor was defined as a ventilated inpatient death ≤75 years of age, without multi-organ system failure, sepsis, or cancer, whose cause of death was consistent with organ donation. These estimates were compared to patient-level data from chart review from two large OPOs. Among 2,907,658 inpatient deaths from 2009-2012, 96,028 (3.3%) were a "possible deceased-organ donor." The two proposed metrics of OPO performance were: (1) donation percentage (percentage of possible deceased-donors who become actual donors; range: 20.0-57.0%); and (2) organs transplanted per possible donor (range: 0.52-1.74). These metrics allow for comparisons of OPO performance and geographic-level donation rates, and identify areas in greatest need of interventions to improve donation rates. We demonstrate that administrative data can be used to identify possible deceased donors in the US and could be a data source for CMS to implement new OPO performance metrics in a standardized fashion. © 2017 The American Society of Transplantation and the American Society of Transplant Surgeons.
Yang, Mino
2007-06-07
Theoretical foundation of rate kernel equation approaches for diffusion-influenced chemical reactions is presented and applied to explain the kinetics of fluorescence quenching reactions. A many-body master equation is constructed by introducing stochastic terms, which characterize the rates of chemical reactions, into the many-body Smoluchowski equation. A Langevin-type of memory equation for the density fields of reactants evolving under the influence of time-independent perturbation is derived. This equation should be useful in predicting the time evolution of reactant concentrations approaching the steady state attained by the perturbation as well as the steady-state concentrations. The dynamics of fluctuation occurring in equilibrium state can be predicted by the memory equation by turning the perturbation off and consequently may be useful in obtaining the linear response to a time-dependent perturbation. It is found that unimolecular decay processes including the time-independent perturbation can be incorporated into bimolecular reaction kinetics as a Laplace transform variable. As a result, a theory for bimolecular reactions along with the unimolecular process turned off is sufficient to predict overall reaction kinetics including the effects of unimolecular reactions and perturbation. As the present formulation is applied to steady-state kinetics of fluorescence quenching reactions, the exact relation between fluorophore concentrations and the intensity of excitation light is derived.
Stein, R Will; Brown, Joseph W; Mooers, Arne Ø
2015-11-01
The phylogeny of Galliformes (landfowl) has been studied extensively; however, the associated chronologies have been criticized recently due to misplaced or misidentified fossil calibrations. As a consequence, it is unclear whether any crown-group lineages arose in the Cretaceous and survived the Cretaceous-Paleogene (K-Pg; 65.5 Ma) mass extinction. Using Bayesian phylogenetic inference on an alignment spanning 14,539 bp of mitochondrial and nuclear DNA sequence data, four fossil calibrations, and a combination of uncorrelated lognormally distributed relaxed-clock and strict-clock models, we inferred a time-calibrated molecular phylogeny for 225 of the 291 extant Galliform taxa. These analyses suggest that crown Galliformes diversified in the Cretaceous and that three-stem lineages survived the K-Pg mass extinction. Ideally, characterizing the tempo and mode of diversification involves a taxonomically complete phylogenetic hypothesis. We used simple constraint structures to incorporate 66 data-deficient taxa and inferred the first taxon-complete phylogenetic hypothesis for the Galliformes. Diversification analyses conducted on 10,000 timetrees sampled from the posterior distribution of candidate trees show that the evolutionary history of the Galliformes is best explained by a rate-shift model including 1-3 clade-specific increases in diversification rate. We further show that the tempo and mode of diversification in the Galliformes conforms to a three-pulse model, with three-stem lineages arising in the Cretaceous and inter and intrafamilial diversification occurring after the K-Pg mass extinction, in the Paleocene-Eocene (65.5-33.9 Ma) or in association with the Eocene-Oligocene transition (33.9 Ma). Copyright © 2015 Elsevier Inc. All rights reserved.
Fossett, Tepanta R D; McNeil, Malcolm R; Pratt, Sheila R; Tompkins, Connie A; Shuster, Linda I
Although many speech errors can be generated at either a linguistic or motoric level of production, phonetically well-formed sound-level serial-order errors are generally assumed to result from disruption of phonologic encoding (PE) processes. An influential model of PE (Dell, 1986; Dell, Burger & Svec, 1997) predicts that speaking rate should affect the relative proportion of these serial-order sound errors (anticipations, perseverations, exchanges). These predictions have been extended to, and have special relevance for persons with aphasia (PWA) because of the increased frequency with which speech errors occur and because their localization within the functional linguistic architecture may help in diagnosis and treatment. Supporting evidence regarding the effect of speaking rate on phonological encoding has been provided by studies using young normal language (NL) speakers and computer simulations. Limited data exist for older NL users and no group data exist for PWA. This study tested the phonologic encoding properties of Dell's model of speech production (Dell, 1986; Dell,et al., 1997), which predicts that increasing speaking rate affects the relative proportion of serial-order sound errors (i.e., anticipations, perseverations, and exchanges). The effects of speech rate on the error ratios of anticipation/exchange (AE), anticipation/perseveration (AP) and vocal reaction time (VRT) were examined in 16 normal healthy controls (NHC) and 16 PWA without concomitant motor speech disorders. The participants were recorded performing a phonologically challenging (tongue twister) speech production task at their typical and two faster speaking rates. A significant effect of increased rate was obtained for the AP but not the AE ratio. Significant effects of group and rate were obtained for VRT. Although the significant effect of rate for the AP ratio provided evidence that changes in speaking rate did affect PE, the results failed to support the model derived predictions
Zaylaa, Amira; Oudjemia, Souad; Charara, Jamal; Girault, Jean-Marc
2015-09-01
This paper presents two new concepts for discrimination of signals of different complexity. The first focused initially on solving the problem of setting entropy descriptors by varying the pattern size instead of the tolerance. This led to the search for the optimal pattern size that maximized the similarity entropy. The second paradigm was based on the n-order similarity entropy that encompasses the 1-order similarity entropy. To improve the statistical stability, n-order fuzzy similarity entropy was proposed. Fractional Brownian motion was simulated to validate the different methods proposed, and fetal heart rate signals were used to discriminate normal from abnormal fetuses. In all cases, it was found that it was possible to discriminate time series of different complexity such as fractional Brownian motion and fetal heart rate signals. The best levels of performance in terms of sensitivity (90%) and specificity (90%) were obtained with the n-order fuzzy similarity entropy. However, it was shown that the optimal pattern size and the maximum similarity measurement were related to intrinsic features of the time series. Copyright © 2015 Elsevier Ltd. All rights reserved.
CSIR Research Space (South Africa)
Fosso-Kankeu, E
2017-04-01
Full Text Available followed the pseudo-second-order rate equation, whereas, the adsorption isotherm followed both the Freundlich and Langmuir isotherm models. The thermodynamics studies revealed that the adsorption processes were spontaneous and endothermic in nature...
Directory of Open Access Journals (Sweden)
Balsamo S
2012-02-01
Full Text Available Sandor Balsamo1–3, Ramires Alsamir Tibana1,2,4, Dahan da Cunha Nascimento1,2, Gleyverton Landim de Farias1,2, Zeno Petruccelli1,2, Frederico dos Santos de Santana1,2, Otávio Vanni Martins1,2, Fernando de Aguiar1,2, Guilherme Borges Pereira4, Jéssica Cardoso de Souza4, Jonato Prestes41Department of Physical Education, Centro Universitário UNIEURO, Brasília, 2GEPEEFS (Resistance training and Health Research Group, Brasília/DF, 3Graduate Program in Medical Sciences, School of Medicine, Universidade de Brasília (UnB, Brasília, 4Graduation Program in Physical Education, Catholic University of Brasilia (UCB, Brasília/DF, BrazilAbstract: The super-set is a widely used resistance training method consisting of exercises for agonist and antagonist muscles with limited or no rest interval between them – for example, bench press followed by bent-over rows. In this sense, the aim of the present study was to compare the effects of different super-set exercise sequences on the total training volume. A secondary aim was to evaluate the ratings of perceived exertion and fatigue index in response to different exercise order. On separate testing days, twelve resistance-trained men, aged 23.0 ± 4.3 years, height 174.8 ± 6.75 cm, body mass 77.8 ± 13.27 kg, body fat 12.0% ± 4.7%, were submitted to a super-set method by using two different exercise orders: quadriceps (leg extension + hamstrings (leg curl (QH or hamstrings (leg curl + quadriceps (leg extension (HQ. Sessions consisted of three sets with a ten-repetition maximum load with 90 seconds rest between sets. Results revealed that the total training volume was higher for the HQ exercise order (P = 0.02 with lower perceived exertion than the inverse order (P = 0.04. These results suggest that HQ exercise order involving lower limbs may benefit practitioners interested in reaching a higher total training volume with lower ratings of perceived exertion compared with the leg extension plus leg curl
Energy Technology Data Exchange (ETDEWEB)
Wu, Dapeng, E-mail: vipbenjamin@163.com; Shu, Ting; Ju, Jinchuan [College of Photoelectric Science and Engineering, National University of Defense Technology, Changsha 410073 (China)
2015-06-15
When the wavelength of overmoded Cherenkov oscillator goes into Ka-band, power handling capacity becomes an essential issue. Using the TM{sub 02} mode or higher order TM{sub 0n} modes as the operating mode is a potential solution. This paper is aimed to find some proper parameters to make the temporal growth rate of the TM{sub 02} mode higher in our previously studied Gigawatt (GW)-class Ka band oscillator. An accurate and fast calculation method of the “hot” dispersion equation is derived for rectangular corrugated SWSs, which are widely used in the high frequency Cherenkov devices. Then, factors that affect the temporal growth rate of the high order TM{sub 0n} modes are analyzed, including the depth of corrugation, the radius of drift tube, and the diode voltage. Results show that, when parameters are chosen properly, the temporal growth rate of the TM{sub 02} mode can be as high as 0.3 ns{sup −1}.
Xu, Meng; Yan, Yaming; Liu, Yanying; Shi, Qiang
2018-04-01
The Nakajima-Zwanzig generalized master equation provides a formally exact framework to simulate quantum dynamics in condensed phases. Yet, the exact memory kernel is hard to obtain and calculations based on perturbative expansions are often employed. By using the spin-boson model as an example, we assess the convergence of high order memory kernels in the Nakajima-Zwanzig generalized master equation. The exact memory kernels are calculated by combining the hierarchical equation of motion approach and the Dyson expansion of the exact memory kernel. High order expansions of the memory kernels are obtained by extending our previous work to calculate perturbative expansions of open system quantum dynamics [M. Xu et al., J. Chem. Phys. 146, 064102 (2017)]. It is found that the high order expansions do not necessarily converge in certain parameter regimes where the exact kernel show a long memory time, especially in cases of slow bath, weak system-bath coupling, and low temperature. Effectiveness of the Padé and Landau-Zener resummation approaches is tested, and the convergence of higher order rate constants beyond Fermi's golden rule is investigated.
International Nuclear Information System (INIS)
Kozhevnikova, L M; Mukminov, F Kh
2000-01-01
A quasilinear system of parabolic equations with energy inequality is considered in a cylindrical domain {t>0}xΩ. In a broad class of unbounded domains Ω two geometric characteristics of a domain are identified which determine the rate of convergence to zero as t→∞ of the L 2 -norm of a solution. Under additional assumptions on the coefficients of the quasilinear system estimates of the derivatives and uniform estimates of the solution are obtained; they are proved to be best possible in the order of convergence to zero in the case of one semilinear equation
Determination of the absolute second-order rate constant for the reaction Na + O3 → NaO + O2
International Nuclear Information System (INIS)
Husain, David; Marshall, Paul; Plane, J.M.C.
1985-01-01
The absolute second-order rate constant for the reaction Na + O 3 -> NaO + O 2 (k 1 ) has been determined by time-resolved atomic resonance absorption spectroscopy at lambda = 589 nm [Na(3 2 Psub(j)) 2 Ssub(1/2))] following pulsed irradiation, coupled with monitoring of O 3 by light absorption in the ultra-violet; this yields k 1 (500 K) = 4(+4,-2) x 10 -10 cm 3 molecule -1 s -1 , resolving large differences for various estimates of this important quantity used in modelling the sodium layer in the mesosphere. (author)
Blitz, M A; Green, N J B; Shannon, R J; Pilling, M J; Seakins, P W; Western, C M; Robertson, S H
2015-07-16
Rate coefficients for the CH3 + CH3 reaction, over the temperature range 300-900 K, have been corrected for errors in the absorption coefficients used in the original publication ( Slagle et al., J. Phys. Chem. 1988 , 92 , 2455 - 2462 ). These corrections necessitated the development of a detailed model of the B̃(2)A1' (3s)-X̃(2)A2″ transition in CH3 and its validation against both low temperature and high temperature experimental absorption cross sections. A master equation (ME) model was developed, using a local linearization of the second-order decay, which allows the use of standard matrix diagonalization methods for the determination of the rate coefficients for CH3 + CH3. The ME model utilized inverse Laplace transformation to link the microcanonical rate constants for dissociation of C2H6 to the limiting high pressure rate coefficient for association, k∞(T); it was used to fit the experimental rate coefficients using the Levenberg-Marquardt algorithm to minimize χ(2) calculated from the differences between experimental and calculated rate coefficients. Parameters for both k∞(T) and for energy transfer ⟨ΔE⟩down(T) were varied and optimized in the fitting procedure. A wide range of experimental data were fitted, covering the temperature range 300-2000 K. A high pressure limit of k∞(T) = 5.76 × 10(-11)(T/298 K)(-0.34) cm(3) molecule(-1) s(-1) was obtained, which agrees well with the best available theoretical expression.
Adsorption removal of acid black 1 from aqueous solution using ordered mesoporous carbon
Energy Technology Data Exchange (ETDEWEB)
Peng, Xiaoming, E-mail: pengxiaoming70@126.com [School of Civil Engineering, Southeast University, Nanjing 210096 (China); Hu, Xijun [Department of Chemical and Biomolecular Engineering, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong,China (China); Fu, Dafang, E-mail: fdf@seu.edu.cn [School of Civil Engineering, Southeast University, Nanjing 210096 (China); Lam, Frank L.Y. [Department of Chemical and Biomolecular Engineering, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong,China (China)
2014-03-01
Highlights: • Ordered mesoporous carbon was prepared using template. • Ordered mesoporous carbon was introduced of N-containing group by Chemical vapor deposition method. • Modified CMK-3 have better adsorption capacity and efficiency than virgin CMK-3 to removal AB1 dye. - Abstract: A novel ordered mesoporous carbon CMK-3 and synthetic CMK-3 containing nitrogen functional groups by ammonia-treated were applied for acid black 1(AB1) dye adsorption. The ammonia-treated(chemical vapor deposition method) before and after CMK-3 were characterized by using a Micrometitics ASAP 2020 surface area analyzer (ASAP 2020), Fourier transform infrared spectrophotometer (FT–IR), X-ray Photoelectron Spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscope (SEM) and equilibrium studies. This result indicates that the prepared CMK-3 and modified CMK-3 were almost uniform, as rope-like domains and their uniform mesopore with diameter centered at 3.2 nm and 3.7 nm. The FIIR analysis depicted that the presence of a variety of new basic functional groups on the modified CMK-3 surface. Several effect variables of pH, dye concentration and temperature were studied. The pseudo second-order model showed the fitter well to agree with the kinetic data. The experimental data were analyzed by the Langmuir and Freundlich models, with the latter found to closely the isotherm model. The adsorption kinetics was found to follow the pseudo-second-order kinetic model. The results show that CMK-3 using ammonia gas modified by thermal treatment system is an effective method to improvement capacity as it shows the highest adsorption capacity of AB1, as compared to the unmodified CMK-3 and the bamboo-based carbon, respectively.
Ordered Mesoporous Carbons as Novel and Efficient Adsorbent for Dye Removal from Aqueous Solution
Directory of Open Access Journals (Sweden)
Phuong T. Dang
2016-01-01
Full Text Available Ordered mesoporous carbons (OMCs were successfully synthesized by using hard template and soft template methods. These materials were characterized by XRD, TEM, and N2 adsorption-desorption Brunauer-Emmett-Teller (BET. From the obtained results, it is revealed that the obtained OMCs samples showed high surface area (>1000 m2/g with high pore volume, mainly mesopore volume (1.2–2.4 cm3/g. Moreover, OMCs samples had similar structure of the SBA-15 silica and exhibited high MB adsorption capacity with qm of 398 mg·g−1 for OMCs synthesis with hard template and 476 mg·g−1 for OMCs synthesis with soft template, respectively. From kinetics investigation, it is confirmed that MB adsorption from aqueous solution obeys the pseudo-second-order kinetic equation.
Liebowitz, David D.
2018-01-01
In the early 1990s, the Supreme Court established standards to facilitate the release of school districts from racial desegregation orders. Over the next two decades, federal courts declared almost half of all districts under court order in 1991 to be "unitary"--that is, to have met their obligations to eliminate dual systems of…
Rapid removal of bisphenol A on highly ordered mesoporous carbon.
Sui, Qian; Huang, Jun; Liu, Yousong; Chang, Xiaofeng; Ji, Guangbin; Deng, Shubo; Xie, Tao; Yu, Gang
2011-01-01
Bisphenol A (BPA) is of global concern due to its disruption of endocrine systems and ubiquity in the aquatic environment. It is important, therefore, that efforts are made to remove it from the aqueous phase. A novel adsorbent, mesoporous carbon CMK-3, prepared from hexagonal SBA-15 mesoporous silica was studied for BPA removal from aqueous phase, and compared with conventional powdered activated carbon (PAC). Characterization of CMK-3 by transmission electron microscopy (TEM), X-ray diffraction, and nitrogen adsorption indicated that prepared CMK-3 had an ordered mesoporous structure with a high specific surface area of 920 m2/g and a pore-size of about 4.9 nm. The adsorption of BPA on CMK-3 followed a pseudo second-order kinetic model. The kinetic constant was 0.00049 g/(mg x min), much higher than the adsorption of BPA on PAC. The adsorption isotherm fitted slightly better with the Freundlich model than the Langmuir model, and adsorption capacity decreased as temperature increased from 10 to 40 degrees C. No significant influence of pH on adsorption was observed at pH 3 to 9; however, adsorption capacity decreased dramatically from pH 9 to 13.
Poulsen, B.R.; Ruiter, G.; Visser, J.; Iversen, J.J.L.
2003-01-01
Finding rate constants from experimental data is often difficult because of offset and noise. A computer program was developed to average experimental data points, reducing the effect of noise, and to produce a loge of slope plot - a plot of the natural logarithm of the slope of a curve -
International Nuclear Information System (INIS)
Cabasse, A; Hazera, Ch; Quintard, L; Cormier, E; Petit, S; Constant, E
2016-01-01
We generate high-order harmonics with a 50 W, Yb femtosecond fiber laser system operating at 100 kHz in a tight focusing configuration. We achieve a high photon flux even with pulses longer than 500 fs. We collect the diverging extreme ultraviolet (XUV) harmonic beam in a 35 mrad wide solid angle by using a spectrometer designed to handle the high thermal load under vacuum and refocus the XUV beam onto a detector where the beam is characterised or can alternatively be used for experiments. This setup is designed for a 50 eV XUV bandwidth and offers the possibility to perform XUV-IR pump probe experiments with both temporal and spectral resolution. The high-order harmonics were generated and optimized at 100 kHz by using several gas target geometries (a gas jet and a semi-infinite gas cell) and several gases (argon, krypton, xenon) that provide XUV beams with different characteristics. After the spectrometer and for high-order harmonic generation (HHG) in xenon, we detect more than 4 × 10 10 photons per second over four harmonics, that is a useful XUV power on target of 0.1 μW. This corresponds to the emission of more than 1 μW per harmonic at the source and we achieved a similar flux with both the semi-infinite cell and the jet. In addition, we observe a strong spectral selectivity when generating harmonics in a semi-infinite gas cell as few harmonics clearly dominate the neighbouring harmonics. We attribute this spectral selectivity to phase matching effects. (paper)
Removal Rate of Organic Matter Using Natural Cellulose via Adsorption Isotherm and Kinetic Studies.
Din, Mohd Fadhil Md; Ponraj, Mohanadoss; Low, Wen-Pei; Fulazzaky, Mohamad Ali; Iwao, Kenzo; Songip, Ahmad Rahman; Chelliapan, Shreeshivadasan; Ismail, Zulhilmi; Jamal, Mohamad Hidayat
2016-02-01
In this study, the removal of natural organic matter (NOM) using coconut fiber (CF) and palm oil fiber (POF) was investigated. Preliminary analysis was performed using a jar test for the selection of optimal medium before the fabricated column model experiment. The equilibrium studies on isotherms and kinetic models for NOM adsorption were analyzed using linearized correlation coefficient. Results showed that the equilibrium data were fitted to Langmuir isotherm model for both CF and POF. The most suitable adsorption model was the pseudo-first-order kinetic model for POF and pseudo-second-order kinetic model for CF. The adsorption capacities achieved by the CF and POF were 15.67 and 30.8 mg/g respectively. Based on this investigation, it can be concluded that the POF is the most suitable material for the removal of NOM in semi polluted river water.
International Nuclear Information System (INIS)
Tanovic, L.; Whitton, J.L.; Kofod, S.
1978-01-01
Following recent studies of energetic ion bombardment of copper, which established the conditions necessary for the production of cones/pyramids, investigations have been extended to include the effects of change in ion energy, target temperature and dose rate. In addition, the authors have attempted a detailed analysis of the influence of sample crystal orientation on the final form of pyramids and have investigated the stability of the pyramids as a function of the total dose. These experiments, as in earlier work, have been done using very pure copper, mass-analyzed ion beams and free of any metal contamination from, for example, defining apertures. (Auth.)
Meng, Hu; Li, Jiang-Yuan; Tang, Yong-Huai
2009-01-01
The virtual instrument system based on LabVIEW 8.0 for ion analyzer which can measure and analyze ion concentrations in solution is developed and comprises homemade conditioning circuit, data acquiring board, and computer. It can calibrate slope, temperature, and positioning automatically. When applied to determine the reaction rate constant by pX, it achieved live acquiring, real-time displaying, automatical processing of testing data, generating the report of results; and other functions. This method simplifies the experimental operation greatly, avoids complicated procedures of manual processing data and personal error, and improves veracity and repeatability of the experiment results.
Directory of Open Access Journals (Sweden)
Rosella Laura
2011-05-01
Full Text Available Abstract Background The province of Ontario, Canada initiated mass immunization clinics with adjuvanted pandemic H1N1 influenza vaccine in October 2009. Due to the scale of the campaign, temporal associations with Guillain-Barré syndrome (GBS and vaccination were expected. The objectives of this analysis were to estimate the number of background GBS cases expected to occur in the projected vaccinated population and to estimate the number of additional GBS cases which would be expected if an association with vaccination existed. The number of influenza-associated GBS cases was also determined. Methods Baseline incidence rates of GBS were determined from published Canadian studies and applied to projected vaccine coverage data to estimate the expected number of GBS cases in the vaccinated population. Assuming an association with vaccine existed, the number of additional cases of GBS expected was determined by applying the rates observed during the 1976 Swine Flu and 1992/1994 seasonal influenza campaigns in the United States. The number of influenza-associated GBS cases expected to occur during the vaccination campaign was determined based on risk estimates of GBS after influenza infection and provincial influenza infection rates using a combination of laboratory-confirmed cases and data from a seroprevalence study. Results The overall provincial vaccine coverage was estimated to be between 32% and 38%. Assuming 38% coverage, between 6 and 13 background cases of GBS were expected within this projected vaccinated cohort (assuming 32% coverage yielded between 5-11 background cases. An additional 6 or 42 cases would be expected if an association between GBS and influenza vaccine was observed (assuming 32% coverage yielded 5 or 35 additional cases; while up to 31 influenza-associated GBS cases could be expected to occur. In comparison, during the same period, only 7 cases of GBS were reported among vaccinated persons. Conclusions Our analyses do not
Energy Technology Data Exchange (ETDEWEB)
1990-11-15
Stittco Utilities, a company distributing propane in Manitoba, applied to the Manitoba Public Utilities Board for an interim order authorizing an increase in rates for all domestic and commercial customers in 3 Manitoba localities. The rate increase requested is based on the increase in the commodity price of propane and related changes in freight rates. If approved, the average rate will increase by ca 28% for residential customers and 27% for commercial customers. With the expectation that the price of propane would decrease in the near future, Stittco proposed to base its rates on a propane price lower than the current market price, in an effort to retain existing customers. Stittco also proposed to establish a variance account, in which the difference between the cost of propane built into the rates and the actual market price would be accumulated. From time to time Stittco would apply to adjust the rate schedule to refund overages or collect shortfalls contained in this variance account. It is Stittco's intention to cancel its new propane supply contract when propane prices stabilize and enter into a new fixed-price contract. Stittco would then apply for a new rate schedule based on the long-term price of propane. Based on the evidence, the Board decided that a prima facie case has been made showing a 105% increase in Stittco's cost of product and delivery, and that this increase should be passed through to Stittco customers effective November 16, 1990. Status reports were required for the variance account starting December 1990.
Grimm, Uwe
2017-01-01
Quasicrystals are non-periodic solids that were discovered in 1982 by Dan Shechtman, Nobel Prize Laureate in Chemistry 2011. The mathematics that underlies this discovery or that proceeded from it, known as the theory of Aperiodic Order, is the subject of this comprehensive multi-volume series. This second volume begins to develop the theory in more depth. A collection of leading experts, among them Robert V. Moody, cover various aspects of crystallography, generalising appropriately from the classical case to the setting of aperiodically ordered structures. A strong focus is placed upon almost periodicity, a central concept of crystallography that captures the coherent repetition of local motifs or patterns, and its close links to Fourier analysis. The book opens with a foreword by Jeffrey C. Lagarias on the wider mathematical perspective and closes with an epilogue on the emergence of quasicrystals, written by Peter Kramer, one of the founders of the field.
Konggidinata, Mas Iwan; Chao, Bing; Lian, Qiyu; Subramaniam, Ramalingam; Zappi, Mark; Gang, Daniel Dianchen
2017-08-15
Chemical and petrochemical industries produce substantial amounts of wastewater everyday. This wastewater contains organic pollutants such as benzene, toluene, ethylbenzene and xylenes (BTEX) that are toxic to human and aquatic life. Ordered Mesoporous Carbon (OMC), the adsorbent that possesses the characteristics of an ideal adsorbent was investigated to understand its properties and suitability for BTEX removal. Adsorption isotherms, adsorption kinetics, the effects of initial BTEX concentrations and temperatures on the adsorption process were studied. The OMCs were characterized using surface area and pore size analyzer, transmission electron microscopy (TEM), elemental analysis, thermogravimetric analysis (TGA) and fourier transform infrared spectroscopy (FTIR). The results suggested that the Langmuir Isotherm and Pseudo-Second-Order Models described the experimental data well. The thermodynamic parameters, Gibbs free energy (ΔG°), the enthalpy change (ΔH°) and the entropy change (ΔS°) of adsorption indicated that the adsorption processes were physical, endothermic, and spontaneous. In addition, OMC had 27% higher overall adsorption capacities compared to granular activated carbon (GAC). Copyright © 2017 Elsevier B.V. All rights reserved.
Energy Technology Data Exchange (ETDEWEB)
1994-01-28
Centra Gas Manitoba, a gas utility, applied before the Manitoba Public Utilities Board for an order approving a year-end rate base, rate of return, cost of service, and revenue requirement based on a 1993 test year and increased rates to be effective in 1994. A hearing was held to consider matters related to Centra's application, and views of intervenors at the hearings, the utility, and the Board are summarized along with the Board decision. Issues considered at the hearings include year-end net plant values, computer expenditures, working capital allowance, capital structure and risk, cost adjustments, gas sales and cost of gas, operating and maintenance expenses, financial expenses, cost allocation, rate design, and other matters including service policies. The revenue requirement increase approved was $30.4 million, which included a $24.8 million increase in the commodity cost of gas. The allowed overall rate of return was 10.17%. 2 figs., 33 tabs.
Kinetics of the Adsorption of Bovine Serum Albumin of White Wine ...
African Journals Online (AJOL)
This study investigates the kinetics of adsorption of bovine serum albumin, BSA, in white wine model solutions onto activated carbon, AC, and alumina, AL. Pseudo-first order and pseudo-second order models were applied to determine the rate and mechanism of adsorption of the white wine protein during the haze removal ...
Dilpazir, S.; Usman, M.; Rasul, Shahid; Arshad, S. N.
2016-01-01
. The photocatalytic activity improved by a factor of ∼2 and the kinetics of photodegradation switched from pseudo-first order to pseudo-second order with increasing TiO2 content with a maximum rate constant of 20.7 h-1. © The Royal Society of Chemistry 2016.
El Gharamti, Mohamad
2016-11-15
This study considers the assimilation problem of subsurface contaminants at the port of Rotterdam in the Netherlands. It involves the estimation of solute concentrations and biodegradation rates of four different chlorinated solvents. We focus on assessing the efficiency of an adaptive hybrid ensemble Kalman filter and optimal interpolation (EnKF-OI) and the exact second-order sampling formulation (EnKFESOS) for mitigating the undersampling of the estimation and observation errors covariances, respectively. A multi-dimensional and multi-species reactive transport model is coupled to simulate the migration of contaminants within a Pleistocene aquifer layer located around 25 m below mean sea level. The biodegradation chain of chlorinated hydrocarbons starting from tetrachloroethene and ending with vinyl chloride is modeled under anaerobic environmental conditions for 5 decades. Yearly pseudo-concentration data are used to condition the forecast concentration and degradation rates in the presence of model and observational errors. Assimilation results demonstrate the robustness of the hybrid EnKF-OI, for accurately calibrating the uncertain biodegradation rates. When implemented serially, the adaptive hybrid EnKF-OI scheme efficiently adjusts the weights of the involved covariances for each individual measurement. The EnKFESOS is shown to maintain the parameter ensemble spread much better leading to more robust estimates of the states and parameters. On average, a well tuned hybrid EnKF-OI and the EnKFESOS respectively suggest around 48 and 21 % improved concentration estimates, as well as around 70 and 23 % improved anaerobic degradation rates, over the standard EnKF. Incorporating large uncertainties in the flow model degrades the accuracy of the estimates of all schemes. Given that the performance of the hybrid EnKF-OI depends on the quality of the background statistics, satisfactory results were obtained only when the uncertainty imposed on the background
Zajonc, R. B.; And Others
1979-01-01
Discusses the controversy of the relationship between birth order and intellectual performance through a detailed evaluation of the confluence model which assumes that the rate of intellectual growth is a function of the intellectual environment within the family and associated with the special circumstances of last children. (CM)
Orderings for conjugate gradient preconditionings
Ortega, James M.
1991-01-01
The effect of orderings on the rate of convergence of the conjugate gradient method with SSOR or incomplete Cholesky preconditioning is examined. Some results also are presented that help to explain why red/black ordering gives an inferior rate of convergence.
Order Aggressiveness and Order Book Dynamics
Anthony D. Hall; Nikolaus Hautsch
2004-01-01
In this paper, we study the determinants of order aggressiveness and traders' order submission strategy in an open limit order book market. Using order book data from the Australian Stock Exchange, we model traders' aggressiveness in market trading, limit order trading as well as in order cancellations on both sides of the market using a six-dimensional autoregressive intensity model. The information revealed by the open order book plays an important role in explaining the degree of order agg...
Order aggressiveness and order book dynamics
DEFF Research Database (Denmark)
Hall, Anthony D.; Hautsch, Nikolaus
2006-01-01
In this paper, we study the determinants of order aggressiveness and traders’ order submission strategy in an open limit order book market. Applying an order classification scheme, we model the most aggressive market orders, limit orders as well as cancellations on both sides of the market...... employing a six-dimensional autoregressive conditional intensity model. Using order book data from the Australian Stock Exchange, we find that market depth, the queued volume, the bid-ask spread, recent volatility, as well as recent changes in both the order flow and the price play an important role...... in explaining the determinants of order aggressiveness. Overall, our empirical results broadly confirm theoretical predictions on limit order book trading. However, we also find evidence for behavior that can be attributed to particular liquidity and volatility effects...
El Gharamti, Mohamad; Valstar, Johan; Janssen, Gijs; Marsman, Annemieke; Hoteit, Ibrahim
2016-01-01
This study considers the assimilation problem of subsurface contaminants at the port of Rotterdam in the Netherlands. It involves the estimation of solute concentrations and biodegradation rates of four different chlorinated solvents. We focus
ARRINDELL, WA; OEI, TPS; EVANS, L; VANDERENDE, J
1991-01-01
In a recent review article, Arrindell, Pickersgill, Merckelbach, Ardon, and Cornet (1991) (Advances in Behaviour Research and Therapy, 13, 73-130) proposed an a priori four-dimensional categorization system for the description of self-rated fears on the basis of suggestions from previous reviews and
Certified higher-order recursive path ordering
Koprowski, A.; Pfenning, F.
2006-01-01
The paper reports on a formalization of a proof of wellfoundedness of the higher-order recursive path ordering (HORPO) in the proof checker Coq. The development is axiom-free and fully constructive. Three substantive parts that could be used also in other developments are the formalizations of the
Default settings of computerized physician order entry system order sets drive ordering habits.
Olson, Jordan; Hollenbeak, Christopher; Donaldson, Keri; Abendroth, Thomas; Castellani, William
2015-01-01
Computerized physician order entry (CPOE) systems are quickly becoming ubiquitous, and groups of orders ("order sets") to allow for easy order input are a common feature. This provides a streamlined mechanism to view, modify, and place groups of related orders. This often serves as an electronic equivalent of a specialty requisition. A characteristic, of these order sets is that specific orders can be predetermined to be "preselected" or "defaulted-on" whenever the order set is used while others are "optional" or "defaulted-off" (though there is typically the option is to "deselect" defaulted-on tests in a given situation). While it seems intuitive that the defaults in an order set are often accepted, additional study is required to understand the impact of these "default" settings in an order set on ordering habits. This study set out to quantify the effect of changing the default settings of an order set. For quality improvement purposes, order sets dealing with transfusions were recently reviewed and modified to improve monitoring of outcome. Initially, the order for posttransfusion hematocrits and platelet count had the default setting changed from "optional" to "preselected." The default settings for platelet count was later changed back to "optional," allowing for a natural experiment to study the effect of the default selections of an order set on clinician ordering habits. Posttransfusion hematocrit values were ordered for 8.3% of red cell transfusions when the default order set selection was "off" and for 57.4% of transfusions when the default selection was "preselected" (P default order set selection was "optional," increased to 59.4% when the default was changed to "preselected" (P default selection was returned to "optional." The posttransfusion platelet count rates during the two "optional" periods: 7.0% versus 7.5% - were not statistically different (P = 0.620). Default settings in CPOE order sets can significantly influence physician selection of
Wetting transitions: First order or second order
International Nuclear Information System (INIS)
Teletzke, G.F.; Scriven, L.E.; Davis, H.T.
1982-01-01
A generalization of Sullivan's recently proposed theory of the equilibrium contact angle, the angle at which a fluid interface meets a solid surface, is investigated. The generalized theory admits either a first-order or second-order transition from a nonzero contact angle to perfect wetting as a critical point is approached, in contrast to Sullivan's original theory, which predicts only a second-order transition. The predictions of this computationally convenient theory are in qualitative agreement with a more rigorous theory to be presented in a future publication
Saha, Dipendu; Barakat, Soukaina; Van Bramer, Scott E; Nelson, Karl A; Hensley, Dale K; Chen, Jihua
2016-12-14
In this work, sulfur-functionalized ordered mesoporous carbons were synthesized by activating the soft-templated mesoporous carbons with sulfur bearing salts that simultaneously enhanced the surface area and introduced sulfur functionalities onto the parent carbon surface. XPS analysis showed that sulfur content within the mesoporous carbons were between 8.2% and 12.9%. The sulfur functionalities include C-S, C═S, -COS, and SO x . SEM images confirmed the ordered mesoporosity within the material. The BET surface areas of the sulfur-functionalized ordered mesoporous carbons range from 837 to 2865 m 2 /g with total pore volume of 0.71-2.3 cm 3 /g. The carbon with highest sulfur functionality was examined for aqueous phase adsorption of mercury (as HgCl 2 ), lead (as Pb(NO 3 ) 2 ), cadmium (as CdCl 2 ), and nickel (as NiCl 2 ) ions in both noncompetitive and competitive mode. Under noncompetitive mode and at a pH greater than 7.0 the affinity of sulfur-functionalized carbons toward heavy metals were in the order of Hg > Pb > Cd > Ni. At lower pH, the adsorbent switched its affinity between Pb and Cd. In the noncompetitive mode, Hg and Pb adsorption showed a strong pH dependency whereas Cd and Ni adsorption did not demonstrate a significant influence of pH. The distribution coefficient for noncompetitive adsorption was in the range of 2448-4000 mL/g for Hg, 290-1990 mL/g for Pb, 550-560 mL/g for Cd, and 115-147 for Ni. The kinetics of adsorption suggested a pseudo-second-order model fits better than other models for all the metals. XPS analysis of metal-adsorption carbons suggested that 7-8% of the adsorbed Hg was converted to HgSO 4 , 14% and 2% of Pb was converted to PbSO 4 and PbS/PbO, respectively, and 5% Cd was converted to CdSO 4 . Ni was below the detection limit for XPS. Overall results suggested these carbon materials might be useful for the separation of heavy metals.
Dilpazir, S.
2016-01-29
Homogeneously dispersed titanium dioxide loaded polyacrylonitrile nanofiber membranes with increased active mass loading, Ti3+ surface defects and hydrophilicity were fabricated by combining electrospinning and UV-ozone surface treatment. The photocatalytic activity improved by a factor of ∼2 and the kinetics of photodegradation switched from pseudo-first order to pseudo-second order with increasing TiO2 content with a maximum rate constant of 20.7 h-1. © The Royal Society of Chemistry 2016.
International Nuclear Information System (INIS)
Kolb, E.W.
1991-01-01
In the original proposal, inflation occurred in the process of a strongly first-order phase transition. This model was soon demonstrated to be fatally flawed. Subsequent models for inflation involved phase transitions that were second-order, or perhaps weakly first-order; some even involved no phase transition at all. Recently the possibility of inflation during a strongly first-order phase transition has been reviewed. In this talk I will discuss some models for first-order inflation, and emphasize unique signatures that result if inflation is realized in a first-order transition. Before discussing first-order inflation, I will briefly review some of the history of inflation to demonstrate how first-order inflation differs from other models. (orig.)
International Nuclear Information System (INIS)
Kolb, E.W.; Chicago Univ., IL
1990-09-01
In the original proposal, inflation occurred in the process of a strongly first-order phase transition. This model was soon demonstrated to be fatally flawed. Subsequent models for inflation involved phase transitions that were second-order, or perhaps weakly first-order; some even involved no phase transition at all. Recently the possibility of inflation during a strongly first-order phase transition has been revived. In this talk I will discuss some models for first-order inflation, and emphasize unique signatures that result in inflation is realized in a first-order transition. Before discussing first-order inflation, I will briefly review some of the history of inflation to demonstrate how first-order inflation differs from other models. 58 refs., 3 figs
Eczema, birth order, and infection.
Hughes, Ann Maree; Crouch, Simon; Lightfoot, Tracy; Ansell, Pat; Simpson, Jill; Roman, Eve
2008-05-15
The association between infections occurring in the first 2 years of life and development of eczema was investigated in 1,782 control children from a national population-based case-control study in the United Kingdom conducted over the period 1991-1996. Dates of eczema and infectious diagnoses were ascertained from contemporaneously collected primary care records. Children diagnosed with eczema before the age of 2 years had more prior clinically diagnosed infections recorded than did children without eczema (rate ratio = 1.26, 95% confidence interval (CI): 1.18, 1.36). The difference in infection rates between children with and without eczema was apparent from birth and throughout the first 2 years of life. As expected, compared with children of second or higher birth order, those firstborn were at increased risk of eczema (p = 0.020); however, the relation between eczema and prior infection was evident only among children of second or higher birth order and not among firstborn children (rate ratio = 1.45, 95% CI: 1.32, 1.59, and rate ratio = 1.08, 95% CI: 0.98, 1.20, respectively). The authors' results are consistent with the notion that the association between birth order and eczema is unlikely to be attributable to variations in early infectious exposure.
Sorption Kinetics for the Removal of Cadmium and Zinc onto Palm Kernel Shell Based Activated Carbon
Directory of Open Access Journals (Sweden)
Muhammad Muhammad
2010-12-01
Full Text Available The kinetics and mechanism of cadmium and zinc adsorption on palm kernel shell based activated carbons (PKSAC have been studied. A series of batch laboratory studies were conducted in order to investigate the suitability of palm kernel shell based activated carbon (PKSAC for the removal of cadmium (cadmium ions and zinc (zinc ions from their aqueous solutions. All batch experiments were carried out at pH 7.0 and a constant temperature of 30+-1°C using an incubator shaker that operated at 150 rpm. The kinetics investigated includes the pseudo first order, the pseudo-second order and the intraparticle diffusion models. The pseudo-second order model correlate excellently the experimental data, suggesting that chemisorption processes could be the rate-limiting step. Keywords: adsorption, cadmium, kinetics, palm kernel shell, zinc
Biswas, Karabi; Caponetto, Riccardo; Mendes Lopes, António; Tenreiro Machado, José António
2017-01-01
This book focuses on two specific areas related to fractional order systems – the realization of physical devices characterized by non-integer order impedance, usually called fractional-order elements (FOEs); and the characterization of vegetable tissues via electrical impedance spectroscopy (EIS) – and provides readers with new tools for designing new types of integrated circuits. The majority of the book addresses FOEs. The interest in these topics is related to the need to produce “analogue” electronic devices characterized by non-integer order impedance, and to the characterization of natural phenomena, which are systems with memory or aftereffects and for which the fractional-order calculus tool is the ideal choice for analysis. FOEs represent the building blocks for designing and realizing analogue integrated electronic circuits, which the authors believe hold the potential for a wealth of mass-market applications. The freedom to choose either an integer- or non-integer-order analogue integrator...
Order Management - Today's focus
DEFF Research Database (Denmark)
Barfod, Ari
1996-01-01
Small and mid-range companies throughout the world have moved towards customer-specific production during the last few years, but often, the order flow has not changed to meet new demands. Customer orders pass through a laarge number of departments, such as sales, construction, pre...... to the final product.In the paper, a new method for improving order flow is presented, including an extended use of activity chain models....
Schuster, Theodor
2013-01-01
We derive color decompositions of arbitrary tree and one-loop QCD amplitudes into color ordered objects called primitive amplitudes. Furthermore, we derive general fermion flip and reversion identities spanning the null space among the primitive amplitudes and use them to prove that all color ordered tree amplitudes of massless QCD can be written as linear combinations of color ordered tree amplitudes of $\\mathcal{N}=4$ super Yang-Mills theory.
DEFF Research Database (Denmark)
Hansen, Bertel Teilfeldt; Olsen, Asmus Leth
2014-01-01
Ballot order effects are well documented in established democracies, but less so in fragile post-conflict settings. We test for the presence of ballot order effects in the 2010 parliamentary election in Afghanistan. Turning out for the 2010 election was a potentially life-threatening endeavor for...
Effect of pH on lead removal from water using tree fern as the sorbent.
Ho, Yuh-Shan
2005-07-01
The sorption of lead from water onto an agricultural by-product, tree fern, was examined as a function of pH. The sorption processes were carried out using an agitated and baffled system. Pseudo-second-order kinetic analyses were performed to determine the rate constant of sorption, the equilibrium sorption capacity, and the initial sorption rate. Application of the pseudo-second-order kinetics model produced very high coefficients of determination. Results showed the efficiency of tree fern as a sorbent for lead. The optimum pH for lead removal was between 4 and 7, with pH 4.9 resulting in better lead removal. Ion exchange occurred in the initial reaction period. In addition, a relation between the change in the solution hydrogen ion concentration and equilibrium capacity was developed and is presented.
Adsorption kinetics of surfactants on activated carbon
Arnelli; Aditama, WP; Fikriani, Z.; Astuti, Y.
2018-04-01
A study on the adsorption of both cationic and anionic surfactants using activated carbon as well as the investigation of the adsorption isotherms and adsorption kinetics has been conducted. The results showed that the adsorption of sodium lauryl sulfate (SLS) by activated carbon was Langmuir’s adsorption isotherm while its adsorption kinetics showed pseudo-second order with an adsorption rate constant of 2.23 x 103 g mg-1 hour-1. Meanwhile, the adsorption of HDTMA-Br by activated carbon showed that the isotherm adsorption tended to follow Freundlich’s isotherm and was pseudo-second order with an adsorption rate constant of 89.39 g mg-1 hour-1.
Malik, P K
2004-09-10
Mahogany sawdust was used to develop an effective carbon adsorbent. This adsorbent was employed for the removal of direct dyes from spent textile dyeing wastewater. The experimental data were analysed by the Langmuir and Freundlich models of adsorption. Equilibrium data fitted well with the Langmuir model. The rates of adsorption were found to conform to the pseudo-second-order kinetics with good correlation. The equilibrium adsorption capacity of the sawdust carbon was determined with the Langmuir equation as well as the pseudo-second-order rate equation and found to be >300 mg dye per gram of the adsorbent. The most ideal pH for adsorption of direct dyes onto sawdust carbon was found to be 3 and below. The results indicate that the Mahogany sawdust carbon could be employed as a low cost alternative to commercial activated carbon in the removal of dyes from wastewater.
Directory of Open Access Journals (Sweden)
Đurđević Dragan D.
2014-01-01
Full Text Available Nowadays the warehouse is very important logistic component of the supply chain, where order-picking systems have important role. Due to the significant impact on logistics performance permanent goals are to increase efficiency and reduce the cost of these systems. To achieve these goals, there are different researches, and their success is determined by the achieved performances. Performances order picking process are dependent on the applied technology concepts of order-picking system, as well as the ways in which it is organized and managed. In addition to the standard conceptions (the man to good and good to the man is one of the newer, so-called. 'put' system - the inverse order-picking. The aim of this paper is to describe this concept, point out its core strengths and weaknesses and provide a basis that may be of importance in the development of warehouse technological solutions and application of this order-picking systems concept.
Eyring, W E; Sobelman, S
1996-04-01
The purpose of this investigation was to clarify the relationship between birth-order position and the development of narcissism, while refining research and theory. The relationship between birth-order status and narcissism was examined with a sample of 79 undergraduate students (55 women and 24 men). These subjects were placed in one of the four following birth-order categories of firstborn, second-born, last-born, and only children. These categories were chosen given their significance in Adlerian theory. Each subject completed the Narcissistic Personality Inventory and a demographic inventory. Based on psychodynamic theory, it was hypothesized that firstborn children were expected to score highest, but statistical significance was not found for an association between narcissism and birth order. Further research is urged to investigate personality theory as it relates to parenting style and birth order.
Adsorption of phenolic compound by aged-refuse
Energy Technology Data Exchange (ETDEWEB)
Chai Xiaoli [State Key Laboratory of Pollution Control and Resource Reuse, School of Enviromental Science and Engineering, Tongji University, Siping Road 1239, Shanghai 200092 (China)]. E-mail: xlchai@mail.tongji.edu.cn; Zhao Youcai [State Key Laboratory of Pollution Control and Resource Reuse, School of Enviromental Science and Engineering, Tongji University, Siping Road 1239, Shanghai 200092 (China)
2006-09-01
The adsorption of phenol, 2-chlorophenol, 4-chlorophenol and 2,4-dichlorophenol by aged-refuse has been studied. Adsorption isotherms have been determined for phenol, 2-chlorophenol, 4-chlorophenol and 2,4-dichlorophenol and the data fits well to the Freundlich equation. The chlorinated phenols are absorbed more strongly than the phenol and the adsorption capacity has an oblivious relationship with the numbers and the position of chlorine subsistent. The experiment data suggests that both the partition function and the chemical adsorption involve in the adsorption process. Pseudo-first-order and pseudo-second-order model were applied to investigate the kinetics of the adsorption and the results show that it fit the pseudo-second-order model. More than one step involves in the adsorption process and the overall rate of the adsorption process appears to be controlled by the chemical reaction. The thermodynamic analysis indicates that the adsorption is spontaneous and endothermic.
Khan, Muhammad Imran; Akhtar, Shahbaz; Zafar, Shagufta; Shaheen, Aqeela; Khan, Muhammad Ali; Luque, Rafael; ur Rehman, Aziz
2015-01-01
The adsorption behavior of anionic dye congo red (CR) from aqueous solutions using an anion exchange membrane (EBTAC) has been investigated at room temperature. The effect of several factors including contact time, membrane dosage, ionic strength and temperature were studied. Kinetic models, namely pseudo-first-order and pseudo-second-order, liquid film diffusion and Elovich models as well as Bangham and modified freundlich Equations, were employed to evaluate the experimental results. Parameters such as adsorption capacities, rate constant and related correlation coefficients for every model were calculated and discussed. The adsorption of CR on anion exchange membranes followed pseudo-second-order Kinetics. Thermodynamic parameters, namely changes in Gibbs free energy (∆G°), enthalpy (∆H°) and entropy (∆S°) were calculated for the adsorption of congo red, indicating an exothermic process. PMID:28793430
Adsorption of phenolic compound by aged-refuse
International Nuclear Information System (INIS)
Chai Xiaoli; Zhao Youcai
2006-01-01
The adsorption of phenol, 2-chlorophenol, 4-chlorophenol and 2,4-dichlorophenol by aged-refuse has been studied. Adsorption isotherms have been determined for phenol, 2-chlorophenol, 4-chlorophenol and 2,4-dichlorophenol and the data fits well to the Freundlich equation. The chlorinated phenols are absorbed more strongly than the phenol and the adsorption capacity has an oblivious relationship with the numbers and the position of chlorine subsistent. The experiment data suggests that both the partition function and the chemical adsorption involve in the adsorption process. Pseudo-first-order and pseudo-second-order model were applied to investigate the kinetics of the adsorption and the results show that it fit the pseudo-second-order model. More than one step involves in the adsorption process and the overall rate of the adsorption process appears to be controlled by the chemical reaction. The thermodynamic analysis indicates that the adsorption is spontaneous and endothermic
DEFF Research Database (Denmark)
Cornes, Michael; van Dongen-Lases, Edmée; Grankvist, Kjell
2017-01-01
does occur if order of draw is not followed during blood collection and when performing venipuncture under less than ideal circumstances, thus putting patient safety at risk. Moreover, given that order of draw is not difficult to follow and knowing that ideal phlebotomy conditions and protocols...... Medicine Working Group for the Preanalytical Phase (EFLM WG-PRE) provides an overview and summary of the literature with regards to order of draw in venous blood collection. Given the evidence presented in this article, the EFLM WG-PRE herein concludes that a significant frequency of sample contamination...
Mathematics of aperiodic order
Lenz, Daniel; Savinien, Jean
2015-01-01
What is order that is not based on simple repetition, that is, periodicity? How must atoms be arranged in a material so that it diffracts like a quasicrystal? How can we describe aperiodically ordered systems mathematically? Originally triggered by the – later Nobel prize-winning – discovery of quasicrystals, the investigation of aperiodic order has since become a well-established and rapidly evolving field of mathematical research with close ties to a surprising variety of branches of mathematics and physics. This book offers an overview of the state of the art in the field of aperiodic order, presented in carefully selected authoritative surveys. It is intended for non-experts with a general background in mathematics, theoretical physics or computer science, and offers a highly accessible source of first-hand information for all those interested in this rich and exciting field. Topics covered include the mathematical theory of diffraction, the dynamical systems of tilings or Delone sets, their cohomolog...
International Nuclear Information System (INIS)
Kasteleyn, P.W.
1971-01-01
Apology. 1. Order-disorder transitions; 2. The Ising model; 3. The classical theories; 4. The exact analysis of the Ising model; 5. Series expansions; 6. Relations between critical indices; 7. Other models; 8. Concluding remarks. (author)
Clay, Adam
2016-01-01
This book deals with the connections between topology and ordered groups. It begins with a self-contained introduction to orderable groups and from there explores the interactions between orderability and objects in low-dimensional topology, such as knot theory, braid groups, and 3-manifolds, as well as groups of homeomorphisms and other topological structures. The book also addresses recent applications of orderability in the studies of codimension-one foliations and Heegaard-Floer homology. The use of topological methods in proving algebraic results is another feature of the book. The book was written to serve both as a textbook for graduate students, containing many exercises, and as a reference for researchers in topology, algebra, and dynamical systems. A basic background in group theory and topology is the only prerequisite for the reader.
Mobile food ordering application
Yang, Fan
2014-01-01
The purpose of this thesis was to build a food ordering client server application for Tom Yum Thai Oy, which is a Thai restaurant in Vaasa. For the customer, this application provides a view of current food information (category, name, image，price, description etc.) on the website and Android application. The customer can order food from these two platforms. For the administrator in restaurant, this application offers a series of operations to add, update, delete and query the information of ...
Operator ordering and causality
Plimak, L. I.; Stenholm, S. T.
2011-01-01
It is shown that causality violations [M. de Haan, Physica 132A, 375, 397 (1985)], emerging when the conventional definition of the time-normal operator ordering [P.L.Kelley and W.H.Kleiner, Phys.Rev. 136, A316 (1964)] is taken outside the rotating wave approximation, disappear when the amended definition [L.P. and S.S., Annals of Physics, 323, 1989 (2008)] of this ordering is used.
Armstrong, Mark
2016-01-01
The paper discusses situations in which consumers search through their options in a deliberate order, in contrast to more familiar models with random search. Topics include: network effects (consumers may be better off following the same search order as other consumers); the use of price and non-price advertising to direct search; the impact of consumers starting a new search with their previous supplier; the incentive sellers have to merge or co-locate with other sellers; and the incentive a...
Laboratory studies on the adsorption kinetics of 137Cs in sediment
International Nuclear Information System (INIS)
Jaison, T.J.; Patra, A.K.; Ravi, P.M.; Sarkar, P.K.
2012-01-01
During the operation of a nuclear reactor, extreme care is taken to minimize the release of radionuclides to the environment. Low level radioactive liquid waste generated is treated and released to the nearest water body after monitoring to ensure that the activity levels are well within the regulatory limits. Environmental Survey Laboratories (ESL) attached to power plants carry out a systematic environmental monitoring and impact assessment to ensure that the dose to the member of public is well within the limits. This paper presents the results of a systematic laboratory study carried out at ESL, Kakrapar Atomic Power Station (KAPS) on the adsorption kinetics of 137 Cs in sediment. The study is to evaluate the sorption kinetics of 137 Cs + onto site specific sediment. Sets of adsorption experiments were conducted at specific time intervals for two different 137 Cs + concentrations, keeping other experimental conditions same. The kinetics of 137 Cs + adsorption on sediment is analyzed using pseudo first order, pseudo second order, and intra-particle diffusion kinetic models. The pseudo-second order kinetic model is better correlated with the kinetics data compared with the pseudo first-order model. This indicates 137 Cs + ions can be involved in chemical bonding during the adsorption process to the analysed sediment. This chemi-sorption processes show a good compliance with the pseudo-second order kinetic model. It is also evident that lower concentration exhibits greater adsorption rate (k 2 value is 1.85 x 10 -5 Bq g -1 min -1 for 1245 Bq sets and 1.05 x 10 -5 Bq g -1 min -1 for 2456 Bq sets) from the pseudo second order model. Intra-particle diffusion rate constants (K id ) were also obtained by two different models for both the concentrations and found to be higher for higher concentration. (author)
ORDERED WEIGHTED DISTANCE MEASURE
Institute of Scientific and Technical Information of China (English)
Zeshui XU; Jian CHEN
2008-01-01
The aim of this paper is to develop an ordered weighted distance (OWD) measure, which is thegeneralization of some widely used distance measures, including the normalized Hamming distance, the normalized Euclidean distance, the normalized geometric distance, the max distance, the median distance and the min distance, etc. Moreover, the ordered weighted averaging operator, the generalized ordered weighted aggregation operator, the ordered weighted geometric operator, the averaging operator, the geometric mean operator, the ordered weighted square root operator, the square root operator, the max operator, the median operator and the min operator axe also the special cases of the OWD measure. Some methods depending on the input arguments are given to determine the weights associated with the OWD measure. The prominent characteristic of the OWD measure is that it can relieve (or intensify) the influence of unduly large or unduly small deviations on the aggregation results by assigning them low (or high) weights. This desirable characteristic makes the OWD measure very suitable to be used in many actual fields, including group decision making, medical diagnosis, data mining, and pattern recognition, etc. Finally, based on the OWD measure, we develop a group decision making approach, and illustrate it with a numerical example.
Arguments from Developmental Order.
Stöckle-Schobel, Richard
2016-01-01
In this article, I investigate a special type of argument regarding the role of development in theorizing about psychological processes and cognitive capacities. Among the issues that developmental psychologists study, discovering the ontogenetic trajectory of mechanisms or capacities underpinning our cognitive functions ranks highly. The order in which functions are developed or capacities are acquired is a matter of debate between competing psychological theories, and also philosophical conceptions of the mind - getting the role and the significance of the different steps in this order right could be seen as an important virtue of such theories. Thus, a special kind of strategy in arguments between competing philosophical or psychological theories is using developmental order in arguing for or against a given psychological claim. In this article, I will introduce an analysis of arguments from developmental order, which come in two general types: arguments emphasizing the importance of the early cognitive processes and arguments emphasizing the late cognitive processes. I will discuss their role in one of the central tools for evaluating scientific theories, namely in making inferences to the best explanation. I will argue that appeal to developmental order is, by itself, an insufficient criterion for theory choice and has to be part of an argument based on other core explanatory or empirical virtues. I will end by proposing a more concerted study of philosophical issues concerning (cognitive) development, and I will present some topics that also pertain to a full-fledged 'philosophy of development.'
Birth order and psychopathology.
Risal, Ajay; Tharoor, Hema
2012-07-01
Ordinal position the child holds within the sibling ranking of a family is related to intellectual functioning, personality, behavior, and development of psychopathology. To study the association between birth order and development of psychopathology in patients attending psychiatry services in a teaching hospital. Hospital-based cross-sectional study. Retrospective file review of three groups of patients was carried out. Patient-related variables like age of onset, birth order, family type, and family history of mental illness were compared with psychiatry diagnosis (ICD-10) generated. SPSS 13; descriptive statistics and one-way analysis of variance (ANOVA) were used. Mean age of onset of mental illness among the adult general psychiatry patients (group I, n = 527) was found to be 33.01 ± 15.073, while it was 11.68 ± 4.764 among the child cases (group II, n = 47) and 26.74 ± 7.529 among substance abuse cases (group III, n = 110). Among group I patients, commonest diagnosis was depression followed by anxiety and somatoform disorders irrespective of birth order. Dissociative disorders were most prevalent in the first born child (36.7%) among group II patients. Among group III patients, alcohol dependence was maximum diagnosis in all birth orders. Depression and alcohol dependence was the commonest diagnosis in adult group irrespective of birth order.
Birth Order and Psychopathology
Directory of Open Access Journals (Sweden)
Ajay Risal
2012-01-01
Full Text Available Context: Ordinal position the child holds within the sibling ranking of a family is related to intellectual functioning, personality, behavior, and development of psychopathology. Aim: To study the association between birth order and development of psychopathology in patients attending psychiatry services in a teaching hospital. Settings and Design: Hospital-based cross-sectional study. Materials and Methods: Retrospective file review of three groups of patients was carried out. Patient-related variables like age of onset, birth order, family type, and family history of mental illness were compared with psychiatry diagnosis (ICD-10 generated. Statistical Analysis: SPSS 13; descriptive statistics and one-way analysis of variance (ANOVA were used. Results: Mean age of onset of mental illness among the adult general psychiatry patients (group I, n = 527 was found to be 33.01 ± 15.073, while it was 11.68 ± 4.764 among the child cases (group II, n = 47 and 26.74 ± 7.529 among substance abuse cases (group III, n = 110. Among group I patients, commonest diagnosis was depression followed by anxiety and somatoform disorders irrespective of birth order. Dissociative disorders were most prevalent in the first born child (36.7% among group II patients. Among group III patients, alcohol dependence was maximum diagnosis in all birth orders. Conclusions: Depression and alcohol dependence was the commonest diagnosis in adult group irrespective of birth order.
Zajonc, R B; Markus, H; Markus, G B
1979-08-01
Studies relating intellectual performance to birth order report conflicting results, some finding intellectual scores to increase, others to decrease with birth order. In contrast, the relationship between intellectual performance and family size is stable and consistently replicable. Why do these two highly related variables generate such divergent results? This birth order puzzle is resolved by means of the confluence model that quantifies the influences upon intellectual growth arising within the family context. At the time of a new birth, two opposing influences act upon intellectual growth of the elder sibling: (a) his or her intellectual environment is "diluted" and (b) he or she loses the "last-born's handicap" and begins serving as an intellectual resource to the younger sibling. Since these opposite effects are not equal in magnitude, the differences in intellectual performance among birth ranks are shown to be age dependent. While elder children may surpass their younger siblings in intellectual performance at some ages, they may be overtaken by them at others. Thus when age is taken into consideration, the birth order literature loses its chaotic character and an orderly pattern of results emerges.
Arguments from Developmental Order
Directory of Open Access Journals (Sweden)
Richard eStöckle-Schobel
2016-05-01
Full Text Available In this article, I investigate a special type of argument regarding the role of development in theorising about psychological processes and cognitive capacities. Among the issues that developmental psychologists study, discovering the ontogenetic trajectory of mechanisms or capacities underpinning our cognitive functions ranks highly. The order in which functions are developed or capacities are acquired is a matter of debate between competing psychological theories, and also philosophical conceptions of the mind – getting the role and the significance of the different steps in this order right could be seen as an important virtue of such theories.Thus, a special kind of strategy in arguments between competing philosophical or psychological theories is using developmental order in arguing for or against a given psychological claim. In this article, I will introduce an analysis of arguments from developmental order, which come in two general types: arguments emphasising the importance of the early cognitive processes and arguments emphasising the late cognitive processes. I will discuss their role in one of the central tools for evaluating scientific theories, namely in making inferences to the best explanation. I will argue that appeal to developmental order is, by itself, an insufficient criterion for theory choice and has to be part of an argument based on other core explanatory or empirical virtues. I will end by proposing a more concerted study of philosophical issues concerning (cognitive development, and I will present some topics that also pertain to a full-fledged ‘philosophy of development’.
First order electroweak phase transition
International Nuclear Information System (INIS)
Buchmueller, W.; Fodor, Z.
1993-01-01
In this work, the authors have studied the phase transition in the SU(2)gauge theory at finite temperature. The authors' improved perturbative approach does not suffer from the infrared problems appearing in the ordinary loop expansion. The authors have calculated the effective potential up to cubic terms in the couplings. The higher order terms suggest that the method is reliable for Higgs masses smaller than 80 GeV. The authors have obtained a non-vanishing magnetic mass which further weakens the transitions. By use of Langer's theory of metastability, the authors have calculated the nucleation rate for critical bubbles and have discussed some cosmological consequences. For m H <80 GeV the phase transition is first order and proceeds via bubble nucleation and growth. The thin wall approximation is only marginally applicable. Since the phase transition is quite weak SM baryogenesis is unlikely. 8 refs., 5 figs
Nonlocal higher order evolution equations
Rossi, Julio D.
2010-06-01
In this article, we study the asymptotic behaviour of solutions to the nonlocal operator ut(x, t)1/4(-1)n-1 (J*Id -1)n (u(x, t)), x ∈ ℝN, which is the nonlocal analogous to the higher order local evolution equation vt(-1)n-1(Δ)nv. We prove that the solutions of the nonlocal problem converge to the solution of the higher order problem with the right-hand side given by powers of the Laplacian when the kernel J is rescaled in an appropriate way. Moreover, we prove that solutions to both equations have the same asymptotic decay rate as t goes to infinity. © 2010 Taylor & Francis.
DEFF Research Database (Denmark)
Annila, A.J.; Clausen, K.N.; Lindgård, P-A.
1990-01-01
A new ordering vector k=(2π/a)(0, 2/3, 2/3) for fcc antiferromagnets has been found by neutron-diffraction experiments at nanokelvin temperatures in the nuclear-spin system of a 65Cu single crystal. The corresponding reflection together with the previously observed (100) Bragg peak show the prese......A new ordering vector k=(2π/a)(0, 2/3, 2/3) for fcc antiferromagnets has been found by neutron-diffraction experiments at nanokelvin temperatures in the nuclear-spin system of a 65Cu single crystal. The corresponding reflection together with the previously observed (100) Bragg peak show...
DEFF Research Database (Denmark)
Mührmann-Lund, Jørgen
2016-01-01
The emergence of police ordinances and police authorities in the early modern period has traditionally been seen as a way to discipline society in order to increase the power of the absolutist state. However, recent investigations of early modern policing in German and French regions show...... focused on local needs even after the creation of a royal police office in 1682. Policing mainly concerned the welfare and privileges of burghers in market towns until the introduction of a country police in 1791, when agrarian reforms began to erode the patriarchal order in the countryside. As a new way...
DEFF Research Database (Denmark)
Ernst, Erik
2003-01-01
This paper introduces the notion of higher-order inheritance hierarchies. They are useful because they provide well-known benefits of object-orientation at the level of entire hierarchies-benefits which are not available with current approaches. Three facets must be adressed: First, it must be po...
van Dijck, Gijs
2017-01-01
Psychological research has demonstrated that an apology can contribute to the well-being of the receiver of the apology. However, the legal community has only cautiously embraced the idea of claiming and ordering apologies in a legal procedure. The conventional wisdom is that apologies that are
International Nuclear Information System (INIS)
Lee, S.Y.
1993-01-01
We found that the perturbed spin tune due to the imperfection resonance plays an important role in beam depolarization at snake resonances. We also found that even order snake resonances exist in the overlapping intrinsic and imperfection resonances. Due to the perturbed spin tune shift of imperfection resonances, each snake resonance splits into two
Czech Academy of Sciences Publication Activity Database
Balcar, Bohuslav; Pazák, Tomáš; Thümmel, E.
2015-01-01
Roč. 228, č. 2 (2015), s. 173-192 ISSN 0016-2736 Institutional support: RVO:67985840 ; RVO:67985556 Keywords : partial ordering * countable chain condition * forcing Subject RIV: BA - General Mathematics Impact factor: 0.553, year: 2015 http://library.utia.cas.cz/separaty/2015/SI/pazak-0437623.pdf
Zajonc, R. B.
2001-01-01
Critiques Rodgers et al.'s June 2000 research on the relation between birth order and intelligence, which suggests that it is a methodological illusion. Explains how the intellectual environment and the teaching function (whereby older children tutor younger ones) contribute to the growth of intellectual maturity, the first negatively and the…
Fernandez, R.; Deveaux, V.
2010-01-01
We provide a formal definition and study the basic properties of partially ordered chains (POC). These systems were proposed to model textures in image processing and to represent independence relations between random variables in statistics (in the later case they are known as Bayesian networks).
Order Division Automated System.
Kniemeyer, Justin M.; And Others
This publication was prepared by the Order Division Automation Project staff to fulfill the Library of Congress' requirement to document all automation efforts. The report was originally intended for internal use only and not for distribution outside the Library. It is now felt that the library community at-large may have an interest in the…
Teunter, RH; Haneveld, WKK
1998-01-01
When the service department of a company selling machines stops producing and supplying spare parts for certain machines, customers are offered an opportunity to place a so-called final order for these spare parts. We focus on one customer with one machine. The customer plans to use this machine up
Removal of tartrazine from aqueous solutions by strongly basic polystyrene anion exchange resins.
Wawrzkiewicz, Monika; Hubicki, Zbigniew
2009-05-30
The removal of tartrazine from aqueous solutions onto the strongly basic polystyrene anion exchangers of type 1 (Amberlite IRA-900) and type 2 (Amberlite IRA-910) was investigated. The experimental data obtained at 100, 200, 300 and 500 mg/dm(3) initial concentrations at 20 degrees C were applied to the pseudo-first order, pseudo-second order and Weber-Morris kinetic models. The calculated sorption capacities (q(e,cal)) and the rate constant of the first order adsorption (k(1)) were determined. The pseudo-second order kinetic constants (k(2)) and capacities were calculated from the plots of t/q(t) vs. t, 1/q(t) vs. 1/t, 1/t vs. 1/q(t) and q(t)/t vs. q(t) for type 1, type 2, type 3 and type 4 of the pseudo-second order expression, respectively. The influence of phase contact time, solution pH and temperature on tartrazine removal was also discussed. The FTIR spectra of pure anion exchangers and those loaded with tartrazine were recorded, too.
Madjid, F. Hadi; Myers, John M.
2016-10-01
The world runs on networks over which signals communicate sequences of symbols, e.g. numerals. Examining both engineered and natural communications networks reveals an unsuspected order that depends on contact with an unpredictable entity. This order has three roots. The first is a proof within quantum theory that no evidence can ever determine its explanation, so that an agent choosing an explanation must do so unpredictably. The second root is the showing that clocks that step computers do not "tell time" but serve as self-adjusting symbol-handling agents that regulate "logically synchronized" motion in response to unpredictable disturbances. Such a clock-agent has a certain independence as well as the capacity to communicate via unpredictable symbols with other clock-agents and to adjust its own tick rate in response to that communication. The third root is the noticing of unpredictable symbol exchange in natural systems, including the transmission of symbols found in molecular biology. We introduce a symbol-handling agent as a role played in some cases by a person, for example a physicist who chooses an explanation of given experimental outcomes, and in other cases by some other biological entity, and in still other cases by an inanimate device, such as a computer-based detector used in physical measurements. While we forbear to try to explain the propensity of agents at all levels from cells to civilizations to form and operate networks of logically synchronized symbol-handling agents, we point to this propensity as an overlooked cosmic order, an order structured by the unpredictability ensuing from the proof. Appreciating the cosmic order leads to a conception of agency that replaces volition by unpredictability and reconceives the notion of objectivity in a way that makes a place for agency in the world as described by physics. Some specific implications for physics are outlined.
Robert, Henry M; Balch, Thomas J; Seabold, Daniel E; Gerber, Shmuel
2011-01-01
The only authorized edition of the classic work on parliamentary procedure, with new and enhanced features, including how to conduct electronic meetings. Robert's Rules of Order is the book on parliamentary procedure for parliamentarians and anyone involved in an organization, association, club, or group and the authoritative guide to smooth, orderly, and fairly conducted meetings and assemblies. This newly revised edition is the only book on parliamentary procedure to have been updated since 1876 under the continuing program of review established by General Henry M. Robert himself, in cooperation with the official publisher of Robert's Rules. The eleventh edition has been thoroughly revised to address common inquiries and incorporate new rules, interpretations, and procedures made necessary by the evolution of parliamentary procedure, including new material relating to electronic communication and "electronic meetings."
International Nuclear Information System (INIS)
Bernhoeft, N.; Lander, G.H.; Colineau, E.
2003-01-01
An asymmetric shift in the position of the magnetic Bragg peak with respect to the fiducial lattice has been observed by resonant X-ray scattering in a diverse series of antiferromagnetic compounds. This apparent violation of Bragg's law is interpreted in terms of a dynamically phased order parameter. We demonstrate the use of this effect as a novel probe of fragile or dynamic thermodynamic order in strongly correlated electronic systems. In particular, fresh light is shed on the paradoxical situation encountered in URu 2 Si 2 where the measured entropy gain on passing through T Neel is incompatible with the ground state moment estimated by neutron diffraction. The intrinsic space-time averaging of the probe used to characterise the thermodynamic macroscopic state may play a crucial and previously neglected role. In turn, this suggests the further use of resonant X-ray scattering in investigations of systems dominated by quantum fluctuations. (author)
Transnational Normative Orders
DEFF Research Database (Denmark)
Kjaer, Poul F.
2013-01-01
No weakening, but rather an expansion, of statehood can be observed in the contemporary world. This does not, on the other hand, imply that extensive forms of constitutional ordering do not exist outside the realm of states. Instead, the evolution of world society has been characterized by a prot......No weakening, but rather an expansion, of statehood can be observed in the contemporary world. This does not, on the other hand, imply that extensive forms of constitutional ordering do not exist outside the realm of states. Instead, the evolution of world society has been characterized...... as represented by the constitutional subject. Third, constitutionalism denotes the institutionalization of a double function, in the form of a principle-based and legally fortified striving toward universal inclusion, providing a sense of direction in time through an articulated form of constitutional...
Transnational Normative Orders
DEFF Research Database (Denmark)
Kjær, Poul F.
2017-01-01
No weakening, but rather an expansion, of statehood can be observed in the contemporary world. This does not, on the other hand, imply that extensive forms of constitutional ordering do not exist outside the realm of states. Instead, the evolution of world society has been characterized by a prot......No weakening, but rather an expansion, of statehood can be observed in the contemporary world. This does not, on the other hand, imply that extensive forms of constitutional ordering do not exist outside the realm of states. Instead, the evolution of world society has been characterized...... as represented by the constitutional subject. Third, constitutionalism denotes the institutionalization of a double function, in the form of a principle-based and legally fortified striving toward universal inclusion, providing a sense of direction in time through an articulated form of constitutional...
Ordered cones and approximation
Keimel, Klaus
1992-01-01
This book presents a unified approach to Korovkin-type approximation theorems. It includes classical material on the approximation of real-valuedfunctions as well as recent and new results on set-valued functions and stochastic processes, and on weighted approximation. The results are notonly of qualitative nature, but include quantitative bounds on the order of approximation. The book is addressed to researchers in functional analysis and approximation theory as well as to those that want to applythese methods in other fields. It is largely self- contained, but the readershould have a solid background in abstract functional analysis. The unified approach is based on a new notion of locally convex ordered cones that are not embeddable in vector spaces but allow Hahn-Banach type separation and extension theorems. This concept seems to be of independent interest.
Czech Academy of Sciences Publication Activity Database
Šmíd, Martin
2007-01-01
Roč. 14, č. 4 (2007), s. 32-38 ISSN 0572-3043 R&D Projects: GA ČR(CZ) GA402/06/1417; GA ČR GA402/04/1294; GA ČR GD402/03/H057 Institutional research plan: CEZ:AV0Z10750506 Keywords : market microstructure * limit order market * portfolio selection Subject RIV: AH - Economics
Birth Order and Psychopathology
Risal, Ajay; Tharoor, Hema
2012-01-01
Context: Ordinal position the child holds within the sibling ranking of a family is related to intellectual functioning, personality, behavior, and development of psychopathology. Aim: To study the association between birth order and development of psychopathology in patients attending psychiatry services in a teaching hospital. Settings and Design: Hospital-based cross-sectional study. Materials and Methods: Retrospective file review of three groups of patients was carried out. Patient-relat...
Paul R. Rosenbaum
2008-01-01
In certain circumstances, one wishes to test one hypothesis only if certain other hypotheses have been rejected. This ordering of hypotheses simplifies the task of controlling the probability of rejecting any true hypothesis. In an example from an observational study, a treated group is shown to be further from both of two control groups than the two control groups are from each other. Copyright 2008, Oxford University Press.
The rating reliability calculator
Directory of Open Access Journals (Sweden)
Solomon David J
2004-04-01
Full Text Available Abstract Background Rating scales form an important means of gathering evaluation data. Since important decisions are often based on these evaluations, determining the reliability of rating data can be critical. Most commonly used methods of estimating reliability require a complete set of ratings i.e. every subject being rated must be rated by each judge. Over fifty years ago Ebel described an algorithm for estimating the reliability of ratings based on incomplete data. While his article has been widely cited over the years, software based on the algorithm is not readily available. This paper describes an easy-to-use Web-based utility for estimating the reliability of ratings based on incomplete data using Ebel's algorithm. Methods The program is available public use on our server and the source code is freely available under GNU General Public License. The utility is written in PHP, a common open source imbedded scripting language. The rating data can be entered in a convenient format on the user's personal computer that the program will upload to the server for calculating the reliability and other statistics describing the ratings. Results When the program is run it displays the reliability, number of subject rated, harmonic mean number of judges rating each subject, the mean and standard deviation of the averaged ratings per subject. The program also displays the mean, standard deviation and number of ratings for each subject rated. Additionally the program will estimate the reliability of an average of a number of ratings for each subject via the Spearman-Brown prophecy formula. Conclusion This simple web-based program provides a convenient means of estimating the reliability of rating data without the need to conduct special studies in order to provide complete rating data. I would welcome other researchers revising and enhancing the program.
Hierarchical partial order ranking
International Nuclear Information System (INIS)
Carlsen, Lars
2008-01-01
Assessing the potential impact on environmental and human health from the production and use of chemicals or from polluted sites involves a multi-criteria evaluation scheme. A priori several parameters are to address, e.g., production tonnage, specific release scenarios, geographical and site-specific factors in addition to various substance dependent parameters. Further socio-economic factors may be taken into consideration. The number of parameters to be included may well appear to be prohibitive for developing a sensible model. The study introduces hierarchical partial order ranking (HPOR) that remedies this problem. By HPOR the original parameters are initially grouped based on their mutual connection and a set of meta-descriptors is derived representing the ranking corresponding to the single groups of descriptors, respectively. A second partial order ranking is carried out based on the meta-descriptors, the final ranking being disclosed though average ranks. An illustrative example on the prioritisation of polluted sites is given. - Hierarchical partial order ranking of polluted sites has been developed for prioritization based on a large number of parameters
DEFF Research Database (Denmark)
Lai, Signe Sophus
2015-01-01
tværs af medier og platforme, forskudt i tid og on-demand. This article focuses on audience ratings, which have functioned as the central ‘currency’ informing the media trade. It discusses changes to the production and accuracy of audience ratings at a time when established standards are being...
Fractional Order Generalized Information
Directory of Open Access Journals (Sweden)
José Tenreiro Machado
2014-04-01
Full Text Available This paper formulates a novel expression for entropy inspired in the properties of Fractional Calculus. The characteristics of the generalized fractional entropy are tested both in standard probability distributions and real world data series. The results reveal that tuning the fractional order allow an high sensitivity to the signal evolution, which is useful in describing the dynamics of complex systems. The concepts are also extended to relative distances and tested with several sets of data, confirming the goodness of the generalization.
Partially ordered algebraic systems
Fuchs, Laszlo
2011-01-01
Originally published in an important series of books on pure and applied mathematics, this monograph by a distinguished mathematician explores a high-level area in algebra. It constitutes the first systematic summary of research concerning partially ordered groups, semigroups, rings, and fields. The self-contained treatment features numerous problems, complete proofs, a detailed bibliography, and indexes. It presumes some knowledge of abstract algebra, providing necessary background and references where appropriate. This inexpensive edition of a hard-to-find systematic survey will fill a gap i
Ordering, materiality and multiplicity
DEFF Research Database (Denmark)
van der Duim, René; Ren, Carina Bregnholm; Jóhannesson, Gunnar Thór
2013-01-01
In this article we discuss how ANT has been translated into tourism research and show how it has impacted the field by presenting three concepts integral to the ANT approach: ordering, materiality and multiplicity. We first introduce ANT and draw attention to current ANT studies in tourism......, followed by a discussion of how newer approaches within post-ANT urge us to face the ontological politics, which we engage in when performing tourism research. In conclusion we argue that ANT enables a radical new way at looking at tourism, tourism destinations and objects and investigations...... into the ontological condition of tourism....
DEFF Research Database (Denmark)
During the last thirty years, the modernisation of gender relations has been dynamic and comprehensive, shaped by the conflicting forces of globalisation as well as women's movements around the world. As the patterns of segregation and discrimination of the classical industrial gender order erode......, new complexities and contentions in gender relations emerge at various sites such as politics, work and families. The main aim of the book is to trace formal as well as informal gender contracts as they emerge in everyday life and also in new norms and regulations set by state and enterprises. Core...... issues are the chances and the barriers for equality and new forms of gender reciprocity and solidarity....
Ordered photonic microstructures
Chen, Kevin Ming
2001-09-01
This thesis examines novel photonic materials systems possessing order in the atomic, microscopic, and macroscopic dimensional regimes. In the atomic order regime, a structure-property investigation is done for Er2O3 in which the first report of room temperature photoluminescence (PL) is provided. Thin films of the rare earth oxide were deposited via reactive sputtering of Er metal in an Ar/O2 ambient, and subsequently annealed to promote grain growth. Heat treatment consisting of a 650°C followed by 1000°C anneal produces maximum crystallinity as measured by glancing angle x-ray diffraction. These films show characteristic PL at λ = 1.54 μm. In the microscopic order regime, omnidirectional reflectors and thin film microcavities are demonstrated using sol-gel and solid-state materials. A first demonstration of omnidirectional reflectivity in sol-gel structures was accomplished using a dielectric stack consisting of 12 spin-on SiO 2/TiO2 quarterwave sol-gel films. Similarly, solid-state dielectric stacks consisting of 6 Si/SiO2 sputtered films were used to demonstrate the same principle. Microcavities were formed using solgel structures, producing a low quality factor Q = 35 due to limitations in film thickness control and lossy interfaces from stress-induced cracks. The high index contrast Si/SiO2 microcavities enabled Q ~ 1000 using 17 total layers following hydrogenation of dangling bonds within the amorphous Si films. Combining fabrication processes for the solid-state microcavity and Er2O3 films, a device was fabricated to demonstrate photoluminescence enhancement of an Er2O3 film embedded in a microcavity. The structure consisted of 3-bilayer mirrors on either side of an SiO2/Er2O3/SiO2 cavity. The Q ~ 300 was near the theoretical value for such a structure. At room temperature, PL of Er2O3 was enhanced by a factor of 1000 in the microcavity compared to a single thin film. In the macroscopic order regime, self-assembly of micron- sized SiO 2 and
15 CFR 700.16 - Changes or cancellations of priority ratings and rated orders.
2010-01-01
... Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE REGULATIONS DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM Industrial Priorities § 700...
Effects of Order of Presentation on Perceptions of the Counselor.
Newman, Jody L.; Fuqua, Dale R.
1992-01-01
Examined whether order in which two counselors were presented on videotape would affect ratings of their performances. Seventy subjects viewed and rated counseling interviews conducted by Carl Rogers and Everett Shostrom. Groups differed only in order of presentation of counselors. Found that order in which counselors were evaluated significantly…
Directory of Open Access Journals (Sweden)
PETER COLLECOTT
2014-05-01
Full Text Available It is common ground amongst almost all commentators that the world has changed radically over the past 25 years – the 25 years since the fall of the Berlin Wall heralded the ending of the Cold War, the reunification of a tragically divided Europe, and the acceleration of the process of globalisation which has its only comparable period in the decades leading up to the First World War in 1914. When analyzing the Emerging World Order it is important to cover more than Brazil economy or any other individual BRICs or other Emerging Powers. Instead, our analysis will provide a global view about the economic and political global power structures which are evolving and forming before our eyes, and then to talk about the challenges these emerging realities pose for us in Europe, and in the West in general.
International Nuclear Information System (INIS)
Anon.
1975-01-01
In the contentious administrative matter concerning the contestation of several partial licenses for the Wuergassen nuclear power station, the Supreme Court of Administration for Nordrhein-Westfalen, has also dismissed the appeal of the plaintiff from the dismissal of the action delivered by the Minden administrative court. The order was passed on 20th February, 1975 - VII A 911/69 - and agrees with the dismissal by the Federal Administrative Court. The plaintiff was a private person. The defendants were the licensing authorities, the Minister for Economy, and the Minister fuer Wirtschaft, Mittelstand und Verkehr of Nordrhein-Westfalen. Also summoned was the Preussische Elektrizitaets-AG, Hannover, to whom the contested licenses had been issued. The value in litigation was fixed at DM 10,000. One half of the extra-judicial costs of the summoned was declared repayable. Some of the grounds upon which the judgment was based are presented in detail. (orig./AK) [de
DEFF Research Database (Denmark)
Israelsen, Stine Møller
This PhD thesis considers higher order modes (HOMs) in optical fibers. That includes their excitation and characteristics. Within the last decades, HOMs have been applied both for space multiplexing in optical communications, group velocity dispersion management and sensing among others......-radial polarization as opposed to the linear polarization of the LP0X modes. The effect is investigated numerically in a double cladding fiber with an outer aircladding using a full vectorial modesolver. Experimentally, the bowtie modes are excited using a long period grating and their free space characteristics...... and polarization state are investigated. For this fiber, the onset of the bowtie effect is shown numerically to be LP011. The characteristics usually associated with Bessel-likes modes such as long diffraction free length and selfhealing are shown to be conserved despite the lack of azimuthal symmetry...
Guggenheim, Jeremy A; McMahon, George; Northstone, Kate; Mandel, Yossi; Kaiserman, Igor; Stone, Richard A; Lin, Xiaoyu; Saw, Seang Mei; Forward, Hannah; Mackey, David A; Yazar, Seyhan; Young, Terri L; Williams, Cathy
2013-12-01
An association between birth order and reduced unaided vision (a surrogate for myopia) has been observed previously. We examined the association between birth order and myopia directly in four subject groups. Subject groups were participants in (1) the Avon Longitudinal Study of Parents and Children (ALSPAC; UK; age 15 years; N = 4401), (2) the Singapore Cohort Study of Risk Factors for Myopia (SCORM; Singapore; age 13 years; N = 1959), (3) the Raine Eye Health Study (REHS; Australia; age 20 years; N = 1344), and (4) Israeli Defense Force Pre-recruitment Candidates (IDFC; Israel; age 16-22 years; N = 888,277). The main outcome was odds ratios (OR) for myopia in first-born versus non-first-born individuals after adjusting for potential risk factors. The prevalence of myopia was numerically higher in first-born versus non-first-born individuals in all study groups, but the strength of evidence varied widely. Adjusted ORs (95% confidence intervals, CIs) were: ALSPAC, 1.31 (1.05-1.64); SCORM, 1.25 (0.89-1.77); REHS, 1.18 (0.90-1.55); and IDFC, 1.04 (1.03-1.06). In the large IDFC sample, the effect size was greater (a) for the first-born versus fourth- or higher-born comparison than for the first-born versus second/third-born comparison (p 4000 participants provided strong statistical support for the association. The available evidence suggested the relationship was independent of established risk factors such as time outdoors/reading, and thus may arise through a different causal mechanism.
Gellert, George A; Catzoela, Linda; Patel, Lajja; Bruner, Kylynn; Friedman, Felix; Ramirez, Ricardo; Saucedo, Lilliana; Webster, S Luke; Gillean, John A
2017-01-01
One strategy to foster adoption of computerized provider order entry (CPOE) by physicians is the monthly distribution of a list identifying the number and use rate percentage of orders entered electronically versus on paper by each physician in the facility. Physicians care about CPOE use rate reports because they support the patient safety and quality improvement objectives of CPOE implementation. Certain physician groups are also motivated because they participate in contracted financial and performance arrangements that include incentive payments or financial penalties for meeting (or failing to meet) a specified CPOE use rate target. Misattribution of order sources can hinder accurate measurement of individual physician CPOE use and can thereby undermine providers' confidence in their reported performance, as well as their motivation to utilize CPOE. Misattribution of order sources also has significant patient safety, quality, and medicolegal implications. This analysis sought to evaluate the magnitude and sources of misattribution among hospitalists with high CPOE use and, if misattribution was found, to formulate strategies to prevent and reduce its recurrence, thereby ensuring the integrity and credibility of individual and facility CPOE use rate reporting. A detailed manual order source review and validation of all orders issued by one hospitalist group at a midsize community hospital was conducted for a one-month study period. We found that a small but not dismissible percentage of orders issued by hospitalists-up to 4.18 percent (95 percent confidence interval, 3.84-4.56 percent) per month-were attributed inaccurately. Sources of misattribution by department or function were as follows: nursing, 42 percent; pharmacy, 38 percent; laboratory, 15 percent; unit clerk, 3 percent; and radiology, 2 percent. Order management and protocol were the most common correct order sources that were incorrectly attributed. Order source misattribution can negatively affect
Directory of Open Access Journals (Sweden)
Plačkov Slađana
2013-01-01
Full Text Available Small oscillations of exchange rate certainly affect the loss of confidence in the currency (Serbian dinar, CSD and because of the shallow market even the smallest change in the supply and demand leads to a shift in exchange rate and brings uncertainty. Some economists suggest that the course should be linked to inflation and thus ensure predictable and stable exchange rates. Real exchange rate or slightly depressed exchange rate will encourage the competitiveness of exporters and perhaps ensure the development of new production lines which, in terms of overvalued exchange rate, had no economic justification. Fixed exchange rate will bring lower interest rates, lower risk and lower business uncertainty (uncertainty avoidance, but Serbia will also reduce foreign exchange reserves by following this trend. On the other hand, a completely free exchange rate, would lead to a (real fall of Serbian currency, which in a certain period would lead to a significant increase in exports, but the consequences for businessmen and citizens with loans pegged to the euro exchange rate, would be disastrous. We will pay special attention to the depreciation of the exchange rate, as it is generally favorable to the export competitiveness of Serbia and, on the other hand, it leads to an increase in debt servicing costs of the government as well as of the private sector. Oscillations of the dinar exchange rate, appreciation and depreciation, sometimes have disastrous consequences on the economy, investors, imports and exports. In subsequent work, we will observe the movement of the dinar exchange rate in Serbia, in the time interval 2009-2012, in order to strike a balance and maintain economic equilibrium. A movement of foreign currencies against the local currency is controlled in the foreign exchange market, so in case economic interests require, The National Bank of Serbia (NBS, on the basis of arbitrary criteria, can intervene in the market.
Matevosyan, Naira R
2016-01-01
The aim of this study is to empirically evaluate judgments entered from 1913 to 2013 in the matters of compulsory sterilization. Holdings and dispositions at the U.S. Appellate and Supreme courts are randomly located in LexisNexis using Shepard's symbols. Continuous variables are processed with the Mantel-Haenszel method. Court orders are used as units of analysis. The majority of cases (56.4 %) concern minors at a mean age of 11.7 years. Forty-four (80 %) petitions are filed by the parents or guardians; 11 (20 %) are parens patriae. Petitions for female sterilization are denied in 56.4 % cases under the Federal Laws (2 U.S.C. 431; 28 U.S.C; 29 U.S.C; 42 U.S.C; 424 U.S.), Procedural due process clause of the 14th Amendment, statutes, and common law precedents. Petitions for female sterilization are granted in 36.4 % cases under the statutory penal codes, the Law of the land, precedents, and the dicta. No significant associations are found between the parity and degree of mental impairment (r = 0.342). Substantial correlations are met between the gender, degree of impairment (r (2) = 0.724), and dispositions (r (2) = 802). The mean age of women is 20.78 years; the mean age of men is 30.25 years. Correlations fail to establish reasoning between the age of the subjects and the entered judgments (r (2) = 0. 356). (1) The female/male ratio (8:1) and age gap of the respondents indicate on a disproportionate impact of the statutes. (2) The procedure of sterilization in itself is incommensurate with equality, as the volume of surgery is uneven in males and females. (3) The case law is instructive with respect to which arguments have not been advanced. (4) Lastly, due to the etiological intricacy of mental impairment, with genetic transmission strikingly different in men and women, expert-witnesses ought to act in a medical vacuum because there is no mathematical certainty as to the transmission mode of the traits in question (exon and intron mutations, triplet repeat
Aggressive Orders and the Resiliency of a Limit Order Market
Degryse, H.A.; de Jong, F.C.J.M.; van Ravenswaaij, M.; Wuyts, G.
2002-01-01
We analyze the resiliency of a pure limit order market for large and small capitalization stocks as well as stocks with different tick sizes.We explore the issue of resiliency by investigating the order flow around aggressive orders that move prices.The impact of aggressive orders is gauged in three
Holmes, Robert R.; Singh, Vijay P.
2016-01-01
Autonomous direct determination of a continuous time series of streamflow is not economically feasible at present (2014). As such, surrogates are used to derive a continuous time series of streamflow. The derivation process entails developing a streamflow rating, which can range from a simple, single-valued relation between stage and streamflow to a fully dynamic one-dimensional model based on hydraulics of the flow.
Birth Order and Activity Level in Children.
Eaton, Warren O.; And Others
1989-01-01
Studied 7,018 children between birth and 7 years and 81 children of 5-8 years to test the hypothesis that birth order is negatively related to motor activity level. Activity level declined linearly across birth position, so that early-borns were rated as more active than later-borns. (RJC)
A comparison of zero-order, first-order, and Monod biotransformation models
International Nuclear Information System (INIS)
Bekins, B.A.; Warren, E.; Godsy, E.M.
1998-01-01
Under some conditions, a first-order kinetic model is a poor representation of biodegradation in contaminated aquifers. Although it is well known that the assumption of first-order kinetics is valid only when substrate concentration, S, is much less than the half-saturation constant, K S , this assumption is often made without verification of this condition. The authors present a formal error analysis showing that the relative error in the first-order approximation is S/K S and in the zero-order approximation the error is K S /S. They then examine the problems that arise when the first-order approximation is used outside the range for which it is valid. A series of numerical simulations comparing results of first- and zero-order rate approximations to Monod kinetics for a real data set illustrates that if concentrations observed in the field are higher than K S , it may be better to model degradation using a zero-order rate expression. Compared with Monod kinetics, extrapolation of a first-order rate to lower concentrations under-predicts the biotransformation potential, while extrapolation to higher concentrations may grossly over-predict the transformation rate. A summary of solubilities and Monod parameters for aerobic benzene, toluene, and xylene (BTX) degradation shows that the a priori assumption of first-order degradation kinetics at sites contaminated with these compounds is not valid. In particular, out of six published values of K S for toluene, only one is greater than 2 mg/L, indicating that when toluene is present in concentrations greater than about a part per million, the assumption of first-order kinetics may be invalid. Finally, the authors apply an existing analytical solution for steady-state one-dimensional advective transport with Monod degradation kinetics to a field data set
Order-sorted Algebraic Specifications with Higher-order Functions
DEFF Research Database (Denmark)
Haxthausen, Anne Elisabeth
1995-01-01
This paper gives a proposal for how order-sorted algebraic specification languages can be extended with higher-order functions. The approach taken is a generalisation to the order-sorted case of an approach given by Mller, Tarlecki and Wirsing for the many-sorted case. The main idea in the proposal...
Order Quantity Distributions in Make-to-Order Manufacturing
DEFF Research Database (Denmark)
Eriksen, Poul Svante; Nielsen, Peter
2011-01-01
and control with a special emphasis on the make-to-order environment is presented. A methodological framework for analyzing the behavior of orders and investigate the validity of the assumptions is given. Furthermore, an analytical approach to identify the horizon needed for aggregating orders to achieve...
Mechanical properties of ordered alloys
International Nuclear Information System (INIS)
Kroupa, F.
1977-06-01
A survey is given of the metallophysical fundamentals of the mechanical properties of ordered two-phase alloys. Alloys of this type have a superlattice structure in a substitution mixed crystal. Ordering is achieved by slow cooling or by annealing below the critical temperature, during which ordering domains (antiphase domains) are formed. At a high degree of ordering, the dislocations are concentrated to form pairs, so-called super-dislocations. The mechanical properties may be selectively changed by varying different parameters (size of the ordering domains, degree of ordering, energy of the antiphase boundaries) by a special composition and heat treatment.(GSC) [de
XY model with higher-order exchange.
Žukovič, Milan; Kalagov, Georgii
2017-08-01
An XY model, generalized by inclusion of up to an infinite number of higher-order pairwise interactions with an exponentially decreasing strength, is studied by spin-wave theory and Monte Carlo simulations. At low temperatures the model displays a quasi-long-range-order phase characterized by an algebraically decaying correlation function with the exponent η=T/[2πJ(p,α)], nonlinearly dependent on the parameters p and α that control the number of the higher-order terms and the decay rate of their intensity, respectively. At higher temperatures the system shows a crossover from the continuous Berezinskii-Kosterlitz-Thouless to the first-order transition for the parameter values corresponding to a highly nonlinear shape of the potential well. The role of topological excitations (vortices) in changing the nature of the transition is discussed.
International Nuclear Information System (INIS)
Maillard, S.; Skorek, R.; Maugis, P.; Dumont, M.
2015-01-01
This chapter presents the basic principles of cluster dynamics as a particular case of mesoscopic rate theory models developed to investigate fuel behaviour under irradiation such as in UO 2 . It is shown that as this method simulates the evolution of the concentration of every type of point or aggregated defect in a grain of material. It produces rich information that sheds light on the mechanisms involved in microstructure evolution and gas behaviour that are not accessible through conventional models but yet can provide for improvements in those models. Cluster dynamics parameters are mainly the energetic values governing the basic evolution mechanisms of the material (diffusion, trapping and thermal resolution). In this sense, the model has a general applicability to very different operational situations (irradiation, ion-beam implantation, annealing) provided that they rely on the same basic mechanisms, without requiring additional data fitting, as is required for more empirical conventional models. This technique, when applied to krypton implanted and annealed samples, yields a precise interpretation of the release curves and helps assess migration mechanisms and the krypton diffusion coefficient, for which data is very difficult to obtain due to the low solubility of the gas. (authors)
Lundberg, Evelina; Svaleryd, Helena
2017-01-01
Previous research has established that birth order affects outcomes such as educational achievements, IQ and earnings. The mechanisms behind these effects are, however, still largely unknown. In this paper, we examine birth-order effects on health, and whether health at young age could be a transmission channel for birth-order effects observed later in life. We find no support for the birth-order effect having a biological origin; rather firstborns have worse health at birth. This disadvantag...
Olson Order of Quantum Observables
Dvurečenskij, Anatolij
2016-11-01
M.P. Olson, Proc. Am. Math. Soc. 28, 537-544 (1971) showed that the system of effect operators of the Hilbert space can be ordered by the so-called spectral order such that the system of effect operators is a complete lattice. Using his ideas, we introduce a partial order, called the Olson order, on the set of bounded observables of a complete lattice effect algebra. We show that the set of bounded observables is a Dedekind complete lattice.
Order Theory in Environmental Sciences
DEFF Research Database (Denmark)
Sørensen, P. B.; Brüggemann, R.; Lerche, D. B.
This is the proceeding from the fifth workshop in Order Theory in Environ-mental Science. In this workshop series the concept of Partial Order Theory is development in relation to application and the use is tested based on specific problems. The Partial Order Theory will have a potential use...
Archimedeanization of ordered vector spaces
Emelyanov, Eduard Yu.
2014-01-01
In the case of an ordered vector space with an order unit, the Archimedeanization method has been developed recently by V.I Paulsen and M. Tomforde. We present a general version of the Archimedeanization which covers arbitrary ordered vector spaces.
Base stock policies with degraded service to larger orders
DEFF Research Database (Denmark)
Du, Bisheng; Larsen, Christian
We study an inventory system controlled by a base stock policy assuming a compound renewal demand process. We extend the base stock policy by incorporating rules for degrading the service of larger orders. Two specific rules are considered, denoted Postpone(q,t) and Split(q), respectively. The aim...... of using these rules is to achieve a given order fill rate of the regular orders (those of size less than or equal to the parameter q) having less inventory. We develop mathematical expressions for the performance measures order fill rate (of the regular orders) and average on-hand inventory level. Based...
Fractional order absolute vibration suppression (AVS) controllers
Halevi, Yoram
2017-04-01
Absolute vibration suppression (AVS) is a control method for flexible structures. The first step is an accurate, infinite dimension, transfer function (TF), from actuation to measurement. This leads to the collocated, rate feedback AVS controller that in some cases completely eliminates the vibration. In case of the 1D wave equation, the TF consists of pure time delays and low order rational terms, and the AVS controller is rational. In all other cases, the TF and consequently the controller are fractional order in both the delays and the "rational parts". The paper considers stability, performance and actual implementation in such cases.
Ordered delinquency: the "effects" of birth order on delinquency.
Cundiff, Patrick R
2013-08-01
Juvenile delinquency has long been associated with birth order in popular culture. While images of the middle child acting out for attention or the rebellious youngest child readily spring to mind, little research has attempted to explain why. Drawing from Adlerian birth order theory and Sulloway's born-to-rebel hypothesis, I examine the relationship between birth order and a variety of delinquent outcomes during adolescence. Following some recent research on birth order and intelligence, I use new methods that allow for the examination of between-individual and within-family differences to better address the potential spurious relationship. My findings suggest that contrary to popular belief, the relationship between birth order and delinquency is spurious. Specifically, I find that birth order effects on delinquency are spurious and largely products of the analytic methods used in previous tests of the relationship. The implications of this finding are discussed.
Competition for order flow and smart order routing systems
Foucault, Thierry; Menkveld, Albert
2006-01-01
We study changes in liquidity following the introduction of a new electronic limit order market when, prior to its introduction, trading is centralized in a single limit order market. We also study how automation of routing decisions and trading fees affect the relative liquidity of rival markets. The theoretical analysis yields three main predictions: (i) consolidated depth is larger in the multiple limit order markets environment, (ii) consolidated bid-ask spread is smaller in the multiple ...
MODELLING OF KINETICS OF FLUORINE ADSORPTION ONTO MODIFIED DIATOMITE
Directory of Open Access Journals (Sweden)
VEACESLAV ZELENTSOV
2017-03-01
Full Text Available The paper presents kinetics modelling of adsorption of fluorine onto modified diatomite, its fundamental characteristics and mathematical derivations. Three models of defluoridation kinetics were used to fit the experimental results on adsorption fluorine onto diatomite: the pseudo-first order model Lagergren, the pseudo-second order model G. McKay and H.S. Ho and intraparticle diffusion model of W.J. Weber and J.C. Morris. Kinetics studies revealed that the adsorption of fluorine followed second-order rate model, complimented by intraparticle diffusion kinetics. The adsorption mechanism of fluorine involved three stages – external surface adsorption, intraparticle diffusion and the stage of equilibrium.
Gellert, George A.; Catzoela, Linda; Patel, Lajja; Bruner, Kylynn; Friedman, Felix; Ramirez, Ricardo; Saucedo, Lilliana; Webster, S. Luke; Gillean, John A.
2017-01-01
Background One strategy to foster adoption of computerized provider order entry (CPOE) by physicians is the monthly distribution of a list identifying the number and use rate percentage of orders entered electronically versus on paper by each physician in the facility. Physicians care about CPOE use rate reports because they support the patient safety and quality improvement objectives of CPOE implementation. Certain physician groups are also motivated because they participate in contracted financial and performance arrangements that include incentive payments or financial penalties for meeting (or failing to meet) a specified CPOE use rate target. Misattribution of order sources can hinder accurate measurement of individual physician CPOE use and can thereby undermine providers’ confidence in their reported performance, as well as their motivation to utilize CPOE. Misattribution of order sources also has significant patient safety, quality, and medicolegal implications. Objective This analysis sought to evaluate the magnitude and sources of misattribution among hospitalists with high CPOE use and, if misattribution was found, to formulate strategies to prevent and reduce its recurrence, thereby ensuring the integrity and credibility of individual and facility CPOE use rate reporting. Methods A detailed manual order source review and validation of all orders issued by one hospitalist group at a midsize community hospital was conducted for a one-month study period. Results We found that a small but not dismissible percentage of orders issued by hospitalists—up to 4.18 percent (95 percent confidence interval, 3.84–4.56 percent) per month—were attributed inaccurately. Sources of misattribution by department or function were as follows: nursing, 42 percent; pharmacy, 38 percent; laboratory, 15 percent; unit clerk, 3 percent; and radiology, 2 percent. Order management and protocol were the most common correct order sources that were incorrectly attributed
Impact of Computerized Order Entry to Pharmacy Interface on Order-Infusion Pump Discrepancies
Directory of Open Access Journals (Sweden)
Rebecca A. Russell
2015-01-01
Full Text Available Background. The ability of safety technologies to decrease errors, harm, and risk to patients has yet to be demonstrated consistently. Objective. To compare discrepancies between medication and intravenous fluid (IVF orders and bedside infusion pump settings within a pediatric intensive care unit (PICU before and after implementation of an interface between computerized physician order entry (CPOE and pharmacy systems. Methods. Within a 72-bed PICU, medication and IVF orders in the CPOE system and bedside infusion pump settings were collected. Rates of discrepancy were calculated and categorized by type. Results were compared to a study conducted prior to interface implementation. Expansion of PICU also occurred between study periods. Results. Of 455 observations, discrepancy rate decreased for IVF (p=0.01 compared to previous study. Overall discrepancy rate for medications was unchanged; however, medications infusing without an order decreased (p<0.01, and orders without corresponding infusion increased (p<0.05. Conclusions. Following implementation of an interface between CPOE and pharmacy systems, fewer discrepancies between IVF orders and infusion pump settings were observed. Discrepancies for medications did not change, and some types of discrepancies increased. In addition to interface implementation, changes in healthcare delivery and workflow related to ICU expansion contributed to observed changes.
Counterbalancing for Serial Order Carryover Effects in Experimental Condition Orders
Brooks, Joseph L.
2012-01-01
Reactions of neural, psychological, and social systems are rarely, if ever, independent of previous inputs and states. The potential for serial order carryover effects from one condition to the next in a sequence of experimental trials makes counterbalancing of condition order an essential part of experimental design. Here, a method is proposed…
Ordering within Moral Orders to Manage Classroom Trouble
Doherty, Catherine; McGregor, Rowena; Shield, Paul
2016-01-01
This paper demonstrates how classroom trouble warranting teacher intervention can stem from transgressions in different layers of the complex moral order regulating classroom interactions. The paper builds from Durkheim's treatment of schooling as the institution responsible for the inculcation of a shared moral order, Bernstein's distinction…
Complete Normal Ordering 1: Foundations
Ellis, John; Skliros, Dimitri P.
2016-01-01
We introduce a new prescription for quantising scalar field theories perturbatively around a true minimum of the full quantum effective action, which is to `complete normal order' the bare action of interest. When the true vacuum of the theory is located at zero field value, the key property of this prescription is the automatic cancellation, to any finite order in perturbation theory, of all tadpole and, more generally, all `cephalopod' Feynman diagrams. The latter are connected diagrams that can be disconnected into two pieces by cutting one internal vertex, with either one or both pieces free from external lines. In addition, this procedure of `complete normal ordering' (which is an extension of the standard field theory definition of normal ordering) reduces by a substantial factor the number of Feynman diagrams to be calculated at any given loop order. We illustrate explicitly the complete normal ordering procedure and the cancellation of cephalopod diagrams in scalar field theories with non-derivative i...
Birth Order, Schooling, and Earnings.
Behrman, Jere R; Taubman, Paul
1986-01-01
Birth-order effects are posited by many to affect earnings and schooling. The authors show how such effects can be interpreted to shift either the earnings possibility frontier for siblings or parental preferences. The authors find empirical evidence for birth- order effects on (age-adjusted) schooling and on earnings for young U.S. adults, though the latter is not robust for all specifications. The examination of intrahousehold allocations suggests that these birth-order differences occur, d...
Ordering variable for parton showers
Energy Technology Data Exchange (ETDEWEB)
Nagy, Zoltan [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Soper, Davison E. [Oregon Univ., Eugene, OR (United States). Inst. of Theoretical Science
2014-01-15
The parton splittings in a parton shower are ordered according to an ordering variable, for example the transverse momentum of the daughter partons relative to the direction of the mother, the virtuality of the splitting, or the angle between the daughter partons. We analyze the choice of the ordering variable and conclude that one particular choice has the advantage of factoring softer splittings from harder splittings graph by graph in a physical gauge.
Ordering variable for parton showers
Energy Technology Data Exchange (ETDEWEB)
Nagy, Zoltán [DESY,Notkestrasse 85, 22607 Hamburg (Germany); Soper, Davison E. [Institute of Theoretical Science, University of Oregon,Eugene, OR 97403-5203 (United States)
2014-06-30
The parton splittings in a parton shower are ordered according to an ordering variable, for example the transverse momentum of the daughter partons relative to the direction of the mother, the virtuality of the splitting, or the angle between the daughter partons. We analyze the choice of the ordering variable and conclude that one particular choice has the advantage of factoring softer splittings from harder splittings graph by graph in a physical gauge.
Algorithms over partially ordered sets
DEFF Research Database (Denmark)
Baer, Robert M.; Østerby, Ole
1969-01-01
in partially ordered sets, answer the combinatorial question of how many maximal chains might exist in a partially ordered set withn elements, and we give an algorithm for enumerating all maximal chains. We give (in § 3) algorithms which decide whether a partially ordered set is a (lower or upper) semi......-lattice, and whether a lattice has distributive, modular, and Boolean properties. Finally (in § 4) we give Algol realizations of the various algorithms....
Ordering variable for parton showers
International Nuclear Information System (INIS)
Nagy, Zoltan; Soper, Davison E.
2014-01-01
The parton splittings in a parton shower are ordered according to an ordering variable, for example the transverse momentum of the daughter partons relative to the direction of the mother, the virtuality of the splitting, or the angle between the daughter partons. We analyze the choice of the ordering variable and conclude that one particular choice has the advantage of factoring softer splittings from harder splittings graph by graph in a physical gauge.
First-order partial differential equations
Rhee, Hyun-Ku; Amundson, Neal R
2001-01-01
This first volume of a highly regarded two-volume text is fully usable on its own. After going over some of the preliminaries, the authors discuss mathematical models that yield first-order partial differential equations; motivations, classifications, and some methods of solution; linear and semilinear equations; chromatographic equations with finite rate expressions; homogeneous and nonhomogeneous quasilinear equations; formation and propagation of shocks; conservation equations, weak solutions, and shock layers; nonlinear equations; and variational problems. Exercises appear at the end of mo
Liquid crystalline order in polymers
Blumstein, Alexandre
1978-01-01
Liquid Crystalline Order in Polymers examines the topic of liquid crystalline order in systems containing rigid synthetic macromolecular chains. Each chapter of the book provides a review of one important area of the field. Chapter 1 discusses scattering in polymer systems with liquid crystalline order. It also introduces the field of liquid crystals. Chapter 2 treats the origin of liquid crystalline order in macromolecules by describing the in-depth study of conformation of such macromolecules in their unassociated state. The chapters that follow describe successively the liquid crystalli
National Archives and Records Administration — Executive orders are official documents, numbered consecutively, through which the President of the United States manages the operations of the Federal Government....
Quadratic gravity in first order formalism
Energy Technology Data Exchange (ETDEWEB)
Alvarez, Enrique; Anero, Jesus; Gonzalez-Martin, Sergio, E-mail: enrique.alvarez@uam.es, E-mail: jesusanero@gmail.com, E-mail: sergio.gonzalez.martin@uam.es [Departamento de Física Teórica and Instituto de Física Teórica (IFT-UAM/CSIC), Universidad Autónoma de Madrid, Cantoblanco, 28049, Madrid (Spain)
2017-10-01
We consider the most general action for gravity which is quadratic in curvature. In this case first order and second order formalisms are not equivalent. This framework is a good candidate for a unitary and renormalizable theory of the gravitational field; in particular, there are no propagators falling down faster than 1/ p {sup 2}. The drawback is of course that the parameter space of the theory is too big, so that in many cases will be far away from a theory of gravity alone. In order to analyze this issue, the interaction between external sources was examined in some detail. We find that this interaction is conveyed mainly by propagation of the three-index connection field. At any rate the theory as it stands is in the conformal invariant phase; only when Weyl invariance is broken through the coupling to matter can an Einstein-Hilbert term (and its corresponding Planck mass scale) be generated by quantum corrections.
Warehouse order-picking process. Order-picker routing problem
Directory of Open Access Journals (Sweden)
E. V. Korobkov
2015-01-01
Full Text Available This article continues “Warehouse order-picking process” cycle and describes order-picker routing sub-problem of a warehouse order-picking process. It draws analogies between the orderpickers’ routing problem and traveling salesman’s problem, shows differences between the standard problem statement of a traveling salesman and routing problem of warehouse orderpickers, and gives the particular Steiner’s problem statement of a traveling salesman.Warehouse layout with a typical order is represented by a graph, with some its vertices corresponding to mandatory order-picker’s visits and some other ones being noncompulsory. The paper describes an optimal Ratliff-Rosenthal algorithm to solve order-picker’s routing problem for the single-block warehouses, i.e. warehouses with only two crossing aisles, defines seven equivalent classes of partial routing sub-graphs and five transitions used to have an optimal routing sub-graph of a order-picker. An extension of optimal Ratliff-Rosenthal order-picker routing algorithm for multi-block warehouses is presented and also reasons for using the routing heuristics instead of exact optimal algorithms are given. The paper offers algorithmic description of the following seven routing heuristics: S-shaped, return, midpoint, largest gap, aisle-by-aisle, composite, and combined as well as modification of combined heuristics. The comparison of orderpicker routing heuristics for one- and two-block warehouses is to be described in the next article of the “Warehouse order-picking process” cycle.
Generation of high order modes
CSIR Research Space (South Africa)
Ngcobo, S
2012-07-01
Full Text Available with the location of the Laguerre polynomial zeros. The Diffractive optical element is used to shape the TEM00 Gassian beam and force the laser to operate on a higher order TEMp0 Laguerre-Gaussian modes or high order superposition of Laguerre-Gaussian modes...
Careri, Giorgio
1984-01-01
Order and Disorder in Matter offers a comprehensive and up-to-date view of structures and processes in matter, in terms of the evolving concepts of order and disorder. Particular emphasis is given to the recent evolution of these concepts and their relationship to the more complex systems in nature.
Laible, Michael R.
2011-01-01
On November 23, 2011 International Space Station Guidance, Navigation, and Control reported unusual pitch rate disturbance. These disturbances were an order of magnitude greater than nominal rates. The Loads and Dynamics team was asked to review and analyze current accelerometer data to investigate this disturbance. This paper will cover the investigation process under taken by the Loads and Dynamics group. It will detail the accelerometers used and analysis performed. The analysis included performing Frequency Fourier Transform of the data to identify the mode of interest. This frequency data is then reviewed with modal analysis of the ISS system model. Once this analysis is complete and the disturbance quantified, a forcing function was produced to replicate the disturbance. This allows the Loads and Dynamics team to report the load limit values for the 100's of interfaces on the ISS.
Operon Gene Order Is Optimized for Ordered Protein Complex Assembly
Wells, Jonathan N.; Bergendahl, L. Therese; Marsh, Joseph A.
2016-01-01
Summary The assembly of heteromeric protein complexes is an inherently stochastic process in which multiple genes are expressed separately into proteins, which must then somehow find each other within the cell. Here, we considered one of the ways by which prokaryotic organisms have attempted to maximize the efficiency of protein complex assembly: the organization of subunit-encoding genes into operons. Using structure-based assembly predictions, we show that operon gene order has been optimized to match the order in which protein subunits assemble. Exceptions to this are almost entirely highly expressed proteins for which assembly is less stochastic and for which precisely ordered translation offers less benefit. Overall, these results show that ordered protein complex assembly pathways are of significant biological importance and represent a major evolutionary constraint on operon gene organization. PMID:26804901
Waltzing between Order and Ordering - a Social Practice Perspective
DEFF Research Database (Denmark)
Sørensen, Brian Vejrum; Boer, Harry
2007-01-01
Organisations are often depicted as strategic intention seeking entities creating strategic objects that form pockets of order in uncertain environments. This design-based view of strategic development is challenged in this paper. The paper illustrates that organisations in building dynamic capab...... change. We find that potentially stabilising objects are underutilised as part of the ongoing ordering process, because they are generally treated as fixed objects rather than as common ground for negotiation and thus dynamic capabilities. ...
Counterbalancing for serial order carryover effects in experimental condition orders
Brooks, Joseph L
2012-01-01
Reactions of neural, psychological, and social systems are rarely, if ever, independent of previous inputs and states. The potential for serial order carryover effects from one condition to the next in a sequence of experimental trials makes counterbalancing of condition order an essential part of experimental design. Here, a method is proposed for generating counterbalanced sequences for repeated-measures designs including those with multiple observations of each condition on one participant...
Dynamic Question Ordering in Online Surveys
Directory of Open Access Journals (Sweden)
Early Kirstin
2017-09-01
Full Text Available Online surveys have the potential to support adaptive questions, where later questions depend on earlier responses. Past work has taken a rule-based approach, uniformly across all respondents. We envision a richer interpretation of adaptive questions, which we call Dynamic Question Ordering (DQO, where question order is personalized. Such an approach could increase engagement, and therefore response rate, as well as imputation quality. We present a DQO framework to improve survey completion and imputation. In the general survey-taking setting, we want to maximize survey completion, and so we focus on ordering questions to engage the respondent and collect hopefully all information, or at least the information that most characterizes the respondent, for accurate imputations. In another scenario, our goal is to provide a personalized prediction. Since it is possible to give reasonable predictions with only a subset of questions, we are not concerned with motivating users to answer all questions. Instead, we want to order questions to get information that reduces prediction uncertainty, while not being too burdensome. We illustrate this framework with two case studies, for the prediction and survey-taking settings. We also discuss DQO for national surveys and consider connections between our statistics-based question-ordering approach and cognitive survey methodology.
Effect of electrolyte nature on kinetics of remazol yellow G removal by electrocoagulation
Rajabi, M.; Bagheri-Roochi, M.; Asghari, A.
2011-10-01
The present study describes an electrocoagulation process for the removal of remazol yellow G from dye solutions using Iron as the anode and Steel as the cathode. Pseudo-first-order, pseudo-second-order and intraparticle diffusion models were used to analyze the kinetic data obtained at different concentrations in different conditions. The adsorption kinetics was well described by the pseudo-second-order kinetic model.
Ferroelectric Fractional-Order Capacitors
Agambayev, Agamyrat
2017-07-25
Poly(vinylidene fluoride)-based polymers and their blends are used to fabricate electrostatic fractional-order capacitors. This simple but effective method allows us to precisely tune the constant phase angle of the resulting fractional-order capacitor by changing the blend composition. Additionally, we have derived an empirical relation between the ratio of the blend constituents and the constant phase angle to facilitate the design of a fractional order capacitor with a desired constant phase angle. The structural composition of the fabricated blends is investigated using Fourier transform infrared spectroscopy and X-ray diffraction techniques.
Ferroelectric Fractional-Order Capacitors
Agambayev, Agamyrat; Patole, Shashikant P.; Farhat, Mohamed; Elwakil, Ahmed; Bagci, Hakan; Salama, Khaled N.
2017-01-01
Poly(vinylidene fluoride)-based polymers and their blends are used to fabricate electrostatic fractional-order capacitors. This simple but effective method allows us to precisely tune the constant phase angle of the resulting fractional-order capacitor by changing the blend composition. Additionally, we have derived an empirical relation between the ratio of the blend constituents and the constant phase angle to facilitate the design of a fractional order capacitor with a desired constant phase angle. The structural composition of the fabricated blends is investigated using Fourier transform infrared spectroscopy and X-ray diffraction techniques.
Partial order infinitary term rewriting
DEFF Research Database (Denmark)
Bahr, Patrick
2014-01-01
We study an alternative model of infinitary term rewriting. Instead of a metric on terms, a partial order on partial terms is employed to formalise convergence of reductions. We consider both a weak and a strong notion of convergence and show that the metric model of convergence coincides with th...... to the metric setting -- orthogonal systems are both infinitarily confluent and infinitarily normalising in the partial order setting. The unique infinitary normal forms that the partial order model admits are Böhm trees....
Electrolyte influence on sorption behaviours of Direct Blue 71 dye on ramie fibre
Directory of Open Access Journals (Sweden)
Yuan Chi
2017-01-01
Full Text Available Ramie loose fibre was dyed using Direct Blue 71 dye at 70, 80, 90 and 100°C without and with NaCl electrolyte in order to investigate the distinction of dye sorption behaviours. The results show that the dye exhaustion increases with addition of NaCl and shortens the equilibrium dyeing time. The dye adsorption process of dyeing without and with NaCl followed pseudo second-order kinetics, but the rate constant of sorption is larger for the latter compared to the former.
High order depletion sensitivity analysis
International Nuclear Information System (INIS)
Naguib, K.; Adib, M.; Morcos, H.N.
2002-01-01
A high order depletion sensitivity method was applied to calculate the sensitivities of build-up of actinides in the irradiated fuel due to cross-section uncertainties. An iteration method based on Taylor series expansion was applied to construct stationary principle, from which all orders of perturbations were calculated. The irradiated EK-10 and MTR-20 fuels at their maximum burn-up of 25% and 65% respectively were considered for sensitivity analysis. The results of calculation show that, in case of EK-10 fuel (low burn-up), the first order sensitivity was found to be enough to perform an accuracy of 1%. While in case of MTR-20 (high burn-up) the fifth order was found to provide 3% accuracy. A computer code SENS was developed to provide the required calculations
Streams with Strahler Stream Order
Minnesota Department of Natural Resources — Stream segments with Strahler stream order values assigned. As of 01/08/08 the linework is from the DNR24K stream coverages and will not match the updated...
THE EMERGING INTERNATIONAL CONSTITUTIONAL ORDER ...
African Journals Online (AJOL)
Dr Tanya du Plessis
CFI) affirmed ... primarily include the value system of the international legal order, meaning norms of ... the existence of such a traditional constitutional demos. Europe's ..... between the African Development Bank (BAD) and one of its employees,.
Directory of Open Access Journals (Sweden)
Simões BrunoAscenso
2010-01-01
Full Text Available The use of twistor methods in the study of Jacobi fields has proved quite fruitful, leading to a series of results. L. Lemaire and J. C. Wood proved several properties of Jacobi fields along harmonic maps from the two-sphere to the complex projective plane and to the three- and four-dimensional spheres, by carefully relating the infinitesimal deformations of the harmonic maps to those of the holomorphic data describing them. In order to advance this programme, we prove a series of relations between infinitesimal properties of the map and those of its twistor lift. Namely, we prove that isotropy and harmonicity to first order of the map correspond to holomorphicity to first order of its lift into the twistor space, relatively to the standard almost complex structures and . This is done by obtaining first-order analogues of classical twistorial constructions.
Directory of Open Access Journals (Sweden)
Bruno Ascenso Simões
2010-01-01
Full Text Available The use of twistor methods in the study of Jacobi fields has proved quite fruitful, leading to a series of results. L. Lemaire and J. C. Wood proved several properties of Jacobi fields along harmonic maps from the two-sphere to the complex projective plane and to the three- and four-dimensional spheres, by carefully relating the infinitesimal deformations of the harmonic maps to those of the holomorphic data describing them. In order to advance this programme, we prove a series of relations between infinitesimal properties of the map and those of its twistor lift. Namely, we prove that isotropy and harmonicity to first order of the map correspond to holomorphicity to first order of its lift into the twistor space, relatively to the standard almost complex structures J1 and J2. This is done by obtaining first-order analogues of classical twistorial constructions.
Birth Order and Vocational Interest
Gandy, Gerald L.
1973-01-01
Investigated birth order differences and the vocational interests of 150 male college students, making use of the Strong Vocational Interest Blank. Sibling sex and interaction effects were also investigated. (DP)
Constitutional orders in multinational firms
DEFF Research Database (Denmark)
Hull Kristensen, Peer; Morgan, Glenn
Multinationals are faced with the problem of how to coordinate different actors and stop `fiefdoms' emerging that inhibits the achievement of transnational cooperation? We identify this as a problem of `constitutional ordering' in the firm. Drawing on Varieties of Capitalism approaches, we explore...... how multinationals from different contexts seek to create constitutional orders. We argue that the models which exist appear to be destructive of coordination. We explore the implications for MNCs....
Topological orders in rigid states
International Nuclear Information System (INIS)
Wen, X.G.
1990-01-01
The authors study a new kind of ordering topological order in rigid states (the states with no local gapless excitations). This paper concentrates on characterization of the different topological orders. As an example the authors discuss in detail chiral spin states of 2+1 dimensional spin systems. Chiral spin states are described by the topological Chern-Simons theories in the continuum limit. The authors show that the topological orders can be characterized by a non-Abelian gauge structure over the moduli space which parametrizes a family of the model Hamiltonians supporting topologically ordered ground states. In 2 + 1 dimensions, the non-Abelian gauge structure determines possible fractional statistics of the quasi-particle excitations over the topologically ordered ground states. The dynamics of the low lying global excitations is shown to be independent of random spatial dependent perturbations. The ground state degeneracy and the non-Abelian gauge structures discussed in this paper are very robust, even against those perturbations that break translation symmetry. The authors also discuss the symmetry properties of the degenerate ground states of chiral spin states. The authors find that some degenerate ground states of chiral spin states on torus carry non-trivial quantum numbers of the 90 degrees rotation
Computerized provider order entry systems.
2001-01-01
Computerized provider order entry (CPOE) systems are designed to replace a hospital's paper-based ordering system. They allow users to electronically write the full range of orders, maintain an online medication administration record, and review changes made to an order by successive personnel. They also offer safety alerts that are triggered when an unsafe order (such as for a duplicate drug therapy) is entered, as well as clinical decision support to guide caregivers to less expensive alternatives or to choices that better fit established hospital protocols. CPOE systems can, when correctly configured, markedly increase efficiency and improve patient safety and patient care. However, facilities need to recognize that currently available CPOE systems require a tremendous amount of time and effort to be spent in customization before their safety and clinical support features can be effectively implemented. What's more, even after they've been customized, the systems may still allow certain unsafe orders to be entered. Thus, CPOE systems are not currently a quick or easy remedy for medical errors. ECRI's Evaluation of CPOE systems--conducted in collaboration with the Institute for Safe Medication Practices (ISMP)--discusses these and other related issues. It also examines and compares CPOE systems from three suppliers: Eclipsys Corp., IDX Systems Corp., and Siemens Medical Solutions Health Services Corp. Our testing focuses primarily on the systems' interfacing capabilities, patient safeguards, and ease of use.
Effect of pH on cadmium biosorption by coconut copra meal
International Nuclear Information System (INIS)
Ofomaja, Augustine E.; Ho, Y.-S.
2007-01-01
Biosorption of cadmium ion by coconut copra meal, an agricultural waste product was investigated as a function of initial solution pH and initial cadmium concentration. Pseudo-second-order kinetic analyses were performed to determine the rate constant of biosorption, the equilibrium capacity, and initial biosorption rate. Cadmium biosorption by copra meal was found to be dependent on the initial solution pH and initial cadmium concentration. Ion exchange occurred in the initial biosorption period. In addition, mathematical relationships were drawn to relate the change in the solution hydrogen ion concentration with equilibrium biosorption capacity, initial cadmium concentration, and equilibrium biosorption capacity
Gradual Ordering in Red Abalone Nacre
Energy Technology Data Exchange (ETDEWEB)
Gilbert, P. U. P. A.; Metzler, Rebecca A.; Zhou, Dong; Scholl, Andreas; Doran, Andrew; Young, Anthony; Kunz, Martin; Tamura, Nobumichi; Coppersmith, Susan N.
2008-09-03
Red abalone (Haliotis rufescens) nacre is a layered composite biomineral that contains crystalline aragonite tablets confined by organic layers. Nacre is intensely studied because its biologically controlled microarchitecture gives rise to remarkable strength and toughness, but the mechanisms leading to its formation are not well understood. Here we present synchrotron spectromicroscopy experiments revealing that stacks of aragonite tablet crystals in nacre are misoriented with respect to each other. Quantitative measurements of crystal orientation, tablet size, and tablet stacking direction show that orientational ordering occurs not abruptly but gradually over a distance of 50 {micro}m. Several lines of evidence indicate that different crystal orientations imply different tablet growth rates during nacre formation. A theoretical model based on kinetic and gradual selection of the fastest growth rates produces results in qualitative and quantitative agreement with the experimental data and therefore demonstrates that ordering in nacre is a result of crystal growth kinetics and competition either in addition or to the exclusion of templation by acidic proteins as previously assumed. As in other natural evolving kinetic systems, selection of the fastest-growing stacks of tablets occurs gradually in space and time. These results suggest that the self-ordering of the mineral phase, which may occur completely independently of biological or organic-molecule control, is fundamental in nacre formation.
Gradual Ordering in Red Abalone Nacre
International Nuclear Information System (INIS)
Gilbert, P.U.P.A.; Metzler, Rebecca A.; Zhou, Dong; Scholl, Andreas; Doran, Andrew; Young, Anthony; Kunz, Martin; Tamura, Nobumichi; Coppersmith, Susan N.
2008-01-01
Red abalone (Haliotis rufescens) nacre is a layered composite biomineral that contains crystalline aragonite tablets confined by organic layers. Nacre is intensely studied because its biologically controlled microarchitecture gives rise to remarkable strength and toughness, but the mechanisms leading to its formation are not well understood. Here we present synchrotron spectromicroscopy experiments revealing that stacks of aragonite tablet crystals in nacre are misoriented with respect to each other. Quantitative measurements of crystal orientation, tablet size, and tablet stacking direction show that orientational ordering occurs not abruptly but gradually over a distance of 50 (micro)m. Several lines of evidence indicate that different crystal orientations imply different tablet growth rates during nacre formation. A theoretical model based on kinetic and gradual selection of the fastest growth rates produces results in qualitative and quantitative agreement with the experimental data and therefore demonstrates that ordering in nacre is a result of crystal growth kinetics and competition either in addition or to the exclusion of templation by acidic proteins as previously assumed. As in other natural evolving kinetic systems, selection of the fastest-growing stacks of tablets occurs gradually in space and time. These results suggest that the self-ordering of the mineral phase, which may occur completely independently of biological or organic-molecule control, is fundamental in nacre formation
pillared and un-pillared bentonite clays
African Journals Online (AJOL)
BARTH EKWUEME
2011-07-29
Jul 29, 2011 ... A pseudo-second order kinetic model was used to characterize the metal ion transport ... may endanger human health through consumption of sea food and ... widely reported. The pillared clays are two – dimensional zeolite.
2012-06-12
... entities Funds collected under the programs are used for promotion, information, research, and advertising... total lamb consumption per dollar spent on advertising and promotion and $37.16 to $39.34 in additional lamb sales per dollar spent on advertising and promotion. Copies of this study can be obtained from the...
2013-05-14
... additional pounds of total lamb consumption per dollar spent on advertising and promotion and $37.16 to $39.34 in additional lamb sales per dollar spent on advertising and promotion. Copies of this study can... advertising, retail promotions, public relations campaigns and media outreach, foodservice programs, consumer...
Multiscale high-order/low-order (HOLO) algorithms and applications
International Nuclear Information System (INIS)
Chacón, L.; Chen, G.; Knoll, D.A.; Newman, C.; Park, H.; Taitano, W.; Willert, J.A.; Womeldorff, G.
2017-01-01
We review the state of the art in the formulation, implementation, and performance of so-called high-order/low-order (HOLO) algorithms for challenging multiscale problems. HOLO algorithms attempt to couple one or several high-complexity physical models (the high-order model, HO) with low-complexity ones (the low-order model, LO). The primary goal of HOLO algorithms is to achieve nonlinear convergence between HO and LO components while minimizing memory footprint and managing the computational complexity in a practical manner. Key to the HOLO approach is the use of the LO representations to address temporal stiffness, effectively accelerating the convergence of the HO/LO coupled system. The HOLO approach is broadly underpinned by the concept of nonlinear elimination, which enables segregation of the HO and LO components in ways that can effectively use heterogeneous architectures. The accuracy and efficiency benefits of HOLO algorithms are demonstrated with specific applications to radiation transport, gas dynamics, plasmas (both Eulerian and Lagrangian formulations), and ocean modeling. Across this broad application spectrum, HOLO algorithms achieve significant accuracy improvements at a fraction of the cost compared to conventional approaches. It follows that HOLO algorithms hold significant potential for high-fidelity system scale multiscale simulations leveraging exascale computing.
Multiscale high-order/low-order (HOLO) algorithms and applications
Energy Technology Data Exchange (ETDEWEB)
Chacón, L., E-mail: chacon@lanl.gov [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Chen, G.; Knoll, D.A.; Newman, C.; Park, H.; Taitano, W. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Willert, J.A. [Institute for Defense Analyses, Alexandria, VA 22311 (United States); Womeldorff, G. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)
2017-02-01
We review the state of the art in the formulation, implementation, and performance of so-called high-order/low-order (HOLO) algorithms for challenging multiscale problems. HOLO algorithms attempt to couple one or several high-complexity physical models (the high-order model, HO) with low-complexity ones (the low-order model, LO). The primary goal of HOLO algorithms is to achieve nonlinear convergence between HO and LO components while minimizing memory footprint and managing the computational complexity in a practical manner. Key to the HOLO approach is the use of the LO representations to address temporal stiffness, effectively accelerating the convergence of the HO/LO coupled system. The HOLO approach is broadly underpinned by the concept of nonlinear elimination, which enables segregation of the HO and LO components in ways that can effectively use heterogeneous architectures. The accuracy and efficiency benefits of HOLO algorithms are demonstrated with specific applications to radiation transport, gas dynamics, plasmas (both Eulerian and Lagrangian formulations), and ocean modeling. Across this broad application spectrum, HOLO algorithms achieve significant accuracy improvements at a fraction of the cost compared to conventional approaches. It follows that HOLO algorithms hold significant potential for high-fidelity system scale multiscale simulations leveraging exascale computing.
Nuclear magnetic ordering in silver
International Nuclear Information System (INIS)
Lefmann, K.
1995-12-01
Nuclear antiferromagnetic ordering has been observed by neutron diffraction in a single crystal of 109 Ag. The critical temperature is found to 700 pK, and the critical field is 100 μT. From the paramagnetic phase a second order phase transition leads into a type-I 1-k structure with long range order. The experiments have taken place at the Hahn-Meitner Institut in Berlin in collaboration with the low Temperature Laboratory in Helsinki, the Niels Bohr Institute in Copenhagen, and Risoe National Laboratory, Roskilde. The present report is a Ph.D. thesis which has been successfully defended at the Niels Bohr Institute. Besides the results of the nuclear ordering experiments the thesis contains a description of the theoretical background for nuclear magnetism and a review of earlier nuclear ordering experiments as well as theoretical work. The principles for studying polarized nuclei with use of polarized and unpolarized neutrons are presented, as well as the results of such experiments. (au) 11 tabs., 59 ills., 143 refs
Nuclear magnetic ordering in silver
Energy Technology Data Exchange (ETDEWEB)
Lefmann, K
1995-12-01
Nuclear antiferromagnetic ordering has been observed by neutron diffraction in a single crystal of {sup 109}Ag. The critical temperature is found to 700 pK, and the critical field is 100 {mu}T. From the paramagnetic phase a second order phase transition leads into a type-I 1-k structure with long range order. The experiments have taken place at the Hahn-Meitner Institut in Berlin in collaboration with the low Temperature Laboratory in Helsinki, the Niels Bohr Institute in Copenhagen, and Risoe National Laboratory, Roskilde. The present report is a Ph.D. thesis which has been successfully defended at the Niels Bohr Institute. Besides the results of the nuclear ordering experiments the thesis contains a description of the theoretical background for nuclear magnetism and a review of earlier nuclear ordering experiments as well as theoretical work. The principles for studying polarized nuclei with use of polarized and unpolarized neutrons are presented, as well as the results of such experiments. (au) 11 tabs., 59 ills., 143 refs.
Ordered particles versus ordered pointers in the hybrid ordered plasma simulation (HOPS) code
International Nuclear Information System (INIS)
Anderson, D.V.; Shumaker, D.E.
1993-01-01
From a computational standpoint, particle simulation calculations for plasmas have not adapted well to the transitions from scalar to vector processing nor from serial to parallel environments. They have suffered from inordinate and excessive accessing of computer memory and have been hobbled by relatively inefficient gather-scatter constructs resulting from the use of indirect indexing. Lastly, the many-to-one mapping characteristic of the deposition phase has made it difficult to perform this in parallel. The authors' code sorts and reorders the particles in a spatial order. This allows them to greatly reduce the memory references, to run in directly indexed vector mode, and to employ domain decomposition to achieve parallelization. The field model solves pre-maxwell equations by interatively implicit methods. The OSOP (Ordered Storage Ordered Processing) version of HOPS keeps the particle tables ordered by rebuilding them after each particle pushing phase. Alternatively, the RSOP (Random Storage Ordered Processing) version keeps a table of pointers ordered by rebuilding them. Although OSOP is somewhat faster than RSOP in tests on vector-parallel machines, it is not clear this advantage will carry over to massively parallel computers
Teat order affects postweaning behaviour in piglets
Directory of Open Access Journals (Sweden)
Roberta Sommavilla
2015-09-01
Full Text Available The objective of this study was to investigate if piglets that suck anterior teats differ from the others in the litter in birth weight, if they have higher growth rate during lactation, and if this affects behaviour and post-weaning weight gain, when piglets change to a solid diet. For this, the teat order of 24 litters was determined during suckling. Piglets were weaned on the 28thday of age, and 24 groups were formed, composed of one piglet that sucked on the first two pairs of teats (AT and three piglets that sucked on the other teats (OT. Even though weight at birth did not vary according to teat order, weight gain at weaning differed between the groups (AT: 6.64, S.E. 0.20kg, OT: 5.73, S.E. 0.13kg; P
Ordering alternatives in MCDM problems
International Nuclear Information System (INIS)
De Baets, B.
1994-01-01
A new approach to the study of a set of alternatives in a multi-criteria decision making problem is presented. Alternatives are described by means of fuzzy sets in the set of criteria, expressing the degrees to which they fulfill the different criteria. The concept of a fuzzy inclusion is introduced and is discussed from an axiomatic point of view. To each implication operator corresponds a fuzzy inclusion. The fuzzy inclusion corresponding to the Goedel operator is used to measure the degree to which the scores of one alternative are contained in the scores of another one. Repeating this for all couples of alternatives yields a fuzzy quasi-order relation in a set of alternatives. The cuts of this fuzzy relation are then classical quasi-order relations: they express orderings of the alternatives, allowing alternatives to be indifferent or incomparable, corresponding to different degrees of confidence
An Ordering Linear Unification Algorithm
Institute of Scientific and Technical Information of China (English)
胡运发
1989-01-01
In this paper,we present an ordering linear unification algorithm(OLU).A new idea on substituteion of the binding terms is introduced to the algorithm,which is able to overcome some drawbacks of other algorithms,e.g.,MM algorithm[1],RG1 and RG2 algorithms[2],Particularly,if we use the directed eyclie graphs,the algoritm needs not check the binding order,then the OLU algorithm can also be aplied to the infinite tree data struceture,and a higher efficiency can be expected.The paper focuses upon the discussion of OLU algorithm and a partial order structure with respect to the unification algorithm.This algorithm has been implemented in the GKD-PROLOG/VAX 780 interpreting system.Experimental results have shown that the algorithm is very simple and efficient.
Irrational Charge from Topological Order
Moessner, R.; Sondhi, S. L.
2010-10-01
Topological or deconfined phases of matter exhibit emergent gauge fields and quasiparticles that carry a corresponding gauge charge. In systems with an intrinsic conserved U(1) charge, such as all electronic systems where the Coulombic charge plays this role, these quasiparticles are also characterized by their intrinsic charge. We show that one can take advantage of the topological order fairly generally to produce periodic Hamiltonians which endow the quasiparticles with continuously variable, generically irrational, intrinsic charges. Examples include various topologically ordered lattice models, the three-dimensional resonating valence bond liquid on bipartite lattices as well as water and spin ice. By contrast, the gauge charges of the quasiparticles retain their quantized values.
DEFF Research Database (Denmark)
Mandrup, Thomas; Vreÿ, Francois
. The problems originating from the resultant “bad order at sea” can be directly felt on land, when smuggling, terrorism and related criminal activities operate more or less unhindered. The book provides an important mapping of the challenges preventing good order at sea off the African coast and East Africa...... in particular. The chapters offer suggestions for increased maritime security in the future and go some way to assist the African Union to implement its maritime strategy and raise the maritime security awareness of its member states....
Risk attitudes and birth order.
Krause, Philipp; Heindl, Johannes; Jung, Andreas; Langguth, Berthold; Hajak, Göran; Sand, Philipp G
2014-07-01
Risk attitudes play important roles in health behavior and everyday decision making. It is unclear, however, whether these attitudes can be predicted from birth order. We investigated 200 mostly male volunteers from two distinct settings. After correcting for multiple comparisons, for the number of siblings and for confounding by gender, ordinal position predicted perception of health-related risks among participants in extreme sports (p < .01). However, the direction of the effect contradicted Adlerian theory. Except for alcohol consumption, these findings extended to self-reported risk behavior. Together, the data call for a cautious stand on the impact of birth order on risk attitudes. © The Author(s) 2013.
Protein domain organisation: adding order
Directory of Open Access Journals (Sweden)
Kummerfeld Sarah K
2009-01-01
Full Text Available Abstract Background Domains are the building blocks of proteins. During evolution, they have been duplicated, fused and recombined, to produce proteins with novel structures and functions. Structural and genome-scale studies have shown that pairs or groups of domains observed together in a protein are almost always found in only one N to C terminal order and are the result of a single recombination event that has been propagated by duplication of the multi-domain unit. Previous studies of domain organisation have used graph theory to represent the co-occurrence of domains within proteins. We build on this approach by adding directionality to the graphs and connecting nodes based on their relative order in the protein. Most of the time, the linear order of domains is conserved. However, using the directed graph representation we have identified non-linear features of domain organization that are over-represented in genomes. Recognising these patterns and unravelling how they have arisen may allow us to understand the functional relationships between domains and understand how the protein repertoire has evolved. Results We identify groups of domains that are not linearly conserved, but instead have been shuffled during evolution so that they occur in multiple different orders. We consider 192 genomes across all three kingdoms of life and use domain and protein annotation to understand their functional significance. To identify these features and assess their statistical significance, we represent the linear order of domains in proteins as a directed graph and apply graph theoretical methods. We describe two higher-order patterns of domain organisation: clusters and bi-directionally associated domain pairs and explore their functional importance and phylogenetic conservation. Conclusion Taking into account the order of domains, we have derived a novel picture of global protein organization. We found that all genomes have a higher than expected
Protein domain organisation: adding order.
Kummerfeld, Sarah K; Teichmann, Sarah A
2009-01-29
Domains are the building blocks of proteins. During evolution, they have been duplicated, fused and recombined, to produce proteins with novel structures and functions. Structural and genome-scale studies have shown that pairs or groups of domains observed together in a protein are almost always found in only one N to C terminal order and are the result of a single recombination event that has been propagated by duplication of the multi-domain unit. Previous studies of domain organisation have used graph theory to represent the co-occurrence of domains within proteins. We build on this approach by adding directionality to the graphs and connecting nodes based on their relative order in the protein. Most of the time, the linear order of domains is conserved. However, using the directed graph representation we have identified non-linear features of domain organization that are over-represented in genomes. Recognising these patterns and unravelling how they have arisen may allow us to understand the functional relationships between domains and understand how the protein repertoire has evolved. We identify groups of domains that are not linearly conserved, but instead have been shuffled during evolution so that they occur in multiple different orders. We consider 192 genomes across all three kingdoms of life and use domain and protein annotation to understand their functional significance. To identify these features and assess their statistical significance, we represent the linear order of domains in proteins as a directed graph and apply graph theoretical methods. We describe two higher-order patterns of domain organisation: clusters and bi-directionally associated domain pairs and explore their functional importance and phylogenetic conservation. Taking into account the order of domains, we have derived a novel picture of global protein organization. We found that all genomes have a higher than expected degree of clustering and more domain pairs in forward and
A Paraconsistent Higher Order Logic
DEFF Research Database (Denmark)
Villadsen, Jørgen
2004-01-01
of paraconsistent logics in knowledge-based systems, logical semantics of natural language, etc. Higher order logics have the advantages of being expressive and with several automated theorem provers available. Also the type system can be helpful. We present a concise description of a paraconsistent higher order...... of the logic is examined by a case study in the domain of medicine. Thus we try to build a bridge between the HOL and MVL communities. A sequent calculus is proposed based on recent work by Muskens. Many non-classical logics are, at the propositional level, funny toys which work quite good, but when one wants...
Birth Order, Club Membership and Mass Media Exposure
Tomeh, Aida K.
1976-01-01
Examines the relationship between birth order, club membership and mass media exposure for women college students in Lebanon. Findings show the total membership rate and mass media consumption are higher among last born girls than first born. Birth order differences are explained in terms of the differential socialization of children. (Author)
7 CFR 1000.85 - Assessment for order administration.
2010-01-01
... Federal milk order each handler shall pay to the market administrator its pro rata share of the expense of administration of the order at a rate specified by the market administrator that is no more than 5 cents per... disposition in the marketing area from a partially regulated distributing plant that exceeds the skim milk and...
Complete normal ordering 1: Foundations
Directory of Open Access Journals (Sweden)
John Ellis
2016-08-01
Full Text Available We introduce a new prescription for quantising scalar field theories (in generic spacetime dimension and background perturbatively around a true minimum of the full quantum effective action, which is to ‘complete normal order’ the bare action of interest. When the true vacuum of the theory is located at zero field value, the key property of this prescription is the automatic cancellation, to any finite order in perturbation theory, of all tadpole and, more generally, all ‘cephalopod’ Feynman diagrams. The latter are connected diagrams that can be disconnected into two pieces by cutting one internal vertex, with either one or both pieces free from external lines. In addition, this procedure of ‘complete normal ordering’ (which is an extension of the standard field theory definition of normal ordering reduces by a substantial factor the number of Feynman diagrams to be calculated at any given loop order. We illustrate explicitly the complete normal ordering procedure and the cancellation of cephalopod diagrams in scalar field theories with non-derivative interactions, and by using a point splitting ‘trick’ we extend this result to theories with derivative interactions, such as those appearing as non-linear σ-models in the world-sheet formulation of string theory. We focus here on theories with trivial vacua, generalising the discussion to non-trivial vacua in a follow-up paper.
Order functions and evaluation codes
DEFF Research Database (Denmark)
Høholdt, Tom; Pellikaan, Ruud; van Lint, Jack
1997-01-01
Based on the notion of an order function we construct and determine the parameters of a class of error-correcting evaluation codes. This class includes the one-point algebraic geometry codes as wella s the generalized Reed-Muller codes and the parameters are detremined without using the heavy...... machinery of algebraic geometry....
Nonlocal higher order evolution equations
Rossi, Julio D.; Schö nlieb, Carola-Bibiane
2010-01-01
In this article, we study the asymptotic behaviour of solutions to the nonlocal operator ut(x, t)1/4(-1)n-1 (J*Id -1)n (u(x, t)), x ∈ ℝN, which is the nonlocal analogous to the higher order local evolution equation vt(-1)n-1(Δ)nv. We prove
Mousavi, M.R.; Phillips, I.C.C.; Reniers, M.A.; Ulidowski, I.; Arun-Kumar, S.; Garg, N.
2006-01-01
Structured Operational Semantics (SOS) is a popular method for defining semantics by means of deduction rules. An important feature of deduction rules, or simply SOS rules, are negative premises, which are crucial in the definitions of such phenomena as priority mechanisms and time-outs. Orderings
Formalisation of the ordering process
Welker, Gera A.; Vries, Jan de
2002-01-01
In this article a conceptual framework of the ordering process, especially the formalisation of this process, is presented. The fundaments of the framework are grounded on the observation that due to information technology and the necessity of reducing control complexity, companies often try to
Ordering in the skyrmions quantization
International Nuclear Information System (INIS)
Ananias Neto, Jorge
1994-01-01
Using collective coordinates for quantization, we show that exits a ordering problem in the definition of momentum operator. We suggest that a new definition for this operator can solve the infrared problem which rises when an attempt to minimize all the quantum Hamiltonian is made
Towards Successful Cloud Ordering Service
Directory of Open Access Journals (Sweden)
Chen Yan-Kwang
2015-03-01
Full Text Available Background: The rise of cloud services has led to a drastic growth of e-commerce and a greater investment in development of new cloud services systems by related industries. For SaaS developers, it is important to understand customer needs and make use of available resources at as early as the system design and development stage. Objectives: This study integrates E-commerce Systems (ECS Success model and Importance-Performance Analysis (IPA into empirical research of the critical factors for cloud ordering system success. Methods/Approach: A survey research is conducted to collect data on customer perceptions of the importance and performance of each attribute of the particular cloud ordering service. The sample is further divided according to the degree of use of online shopping into high-usage users and low-usage users in order to explore their views regarding the system and generate adequate coping strategies. Results: Developers of online ordering systems can refer to the important factors obtained in this study when planning strategies of product/service improvement. Conclusions: The approach proposed in this study can also be applied to evaluation of other kinds of cloud services systems.
Vibrational spectra of ordered perovskites
Corsmit, A.F.; Hoefdraad, H.E.; Blasse, G.
1972-01-01
The vibrational spectra of the molecular M6+O6 (M = Mo, Te, W) group in ordered perovskites of the type Ba2M2+M6+O6 are reported. These groups have symmetry Oh, whereas their site symmetry is also Oh. An assignment of the internal vibrations is presented.
Birth Order and Vocational Preference.
Lynch, Robert M.; Lynch, Janet
1980-01-01
The relationship between vocational preferences of adolescents and their birth order was examined. Firstborns were found to be overrepresented in the conventional and enterprising areas; later borns were found to be overrepresented in the social and investigative areas. (Author/GK)
Order, disorder and generalized statistics
International Nuclear Information System (INIS)
Marino, E.C.; Swieca, J.A.
1980-06-01
We generalize the prescription of Kadanoff and Ceva for the computation of disorder variables correlation functions in the Ising model for continuous field theories with U(1) symmetry. By considering the product of order and disorder variables, we obtain a path integral representation for fields with generalized statistics. We discuss in detail the cases of massless Thirring and Schwinger models. (Author) [pt
Spatial Processes in Linear Ordering
von Hecker, Ulrich; Klauer, Karl Christoph; Wolf, Lukas; Fazilat-Pour, Masoud
2016-01-01
Memory performance in linear order reasoning tasks (A > B, B > C, C > D, etc.) shows quicker, and more accurate responses to queries on wider (AD) than narrower (AB) pairs on a hypothetical linear mental model (A -- B -- C -- D). While indicative of an analogue representation, research so far did not provide positive evidence for spatial…
Order, disorder and generalized statistics
International Nuclear Information System (INIS)
Marino, E.C.; Swieca, J.A.; Pontificia Universidade Catolica do Rio de Janeiro
1980-01-01
We generalize the prescription of Kadanoff and Ceva for the computation of disorder variable correlation functions in the Ising model for continuous field theories with U(1) symmetry. By considering the product of order and disorder variables, we obtain a path integral representation for fields with generalized statistics. We discuss in detail the cases of massless Thirring and Schwinger models. (orig.)
Correlation order, merging and diversification
Dhaene, J.; Denuit, M.; Vanduffel, S.
2009-01-01
We investigate the influence of the dependence between random losses on the shortfall and on the diversification benefit that arises from merging these losses. We prove that increasing the dependence between losses, expressed in terms of correlation order, has an increasing effect on the shortfall,
On nonlinear reduced order modeling
International Nuclear Information System (INIS)
Abdel-Khalik, Hany S.
2011-01-01
When applied to a model that receives n input parameters and predicts m output responses, a reduced order model estimates the variations in the m outputs of the original model resulting from variations in its n inputs. While direct execution of the forward model could provide these variations, reduced order modeling plays an indispensable role for most real-world complex models. This follows because the solutions of complex models are expensive in terms of required computational overhead, thus rendering their repeated execution computationally infeasible. To overcome this problem, reduced order modeling determines a relationship (often referred to as a surrogate model) between the input and output variations that is much cheaper to evaluate than the original model. While it is desirable to seek highly accurate surrogates, the computational overhead becomes quickly intractable especially for high dimensional model, n ≫ 10. In this manuscript, we demonstrate a novel reduced order modeling method for building a surrogate model that employs only 'local first-order' derivatives and a new tensor-free expansion to efficiently identify all the important features of the original model to reach a predetermined level of accuracy. This is achieved via a hybrid approach in which local first-order derivatives (i.e., gradient) of a pseudo response (a pseudo response represents a random linear combination of original model’s responses) are randomly sampled utilizing a tensor-free expansion around some reference point, with the resulting gradient information aggregated in a subspace (denoted by the active subspace) of dimension much less than the dimension of the input parameters space. The active subspace is then sampled employing the state-of-the-art techniques for global sampling methods. The proposed method hybridizes the use of global sampling methods for uncertainty quantification and local variational methods for sensitivity analysis. In a similar manner to
Ebrahimi-Gatkash, Mehdi; Younesi, Habibollah; Shahbazi, Afsaneh; Heidari, Ava
2017-07-01
In the present study, amino-functionalized Mobil Composite Material No. 41 (MCM-41) was used as an adsorbent to remove nitrate anions from aqueous solutions. Mono-, di- and tri-amino functioned silicas (N-MCM-41, NN-MCM-41 and NNN-MCM-41) were prepared by post-synthesis grafting method. The samples were characterized by means of X-ray powder diffraction, FTIR spectroscopy, thermogravimetric analysis, scanning electron microscopy and nitrogen adsorption-desorption. The effects of pH, initial concentration of anions, and adsorbent loading were examined in batch adsorption system. Results of adsorption experiments showed that the adsorption capacity increased with increasing adsorbent loading and initial anion concentration. It was found that the Langmuir mathematical model indicated better fit to the experimental data than the Freundlich. According to the constants of the Langmuir equation, the maximum adsorption capacity for nitrate anion by N-MCM-41, NN-MCM-41 and NNN-MCM-41 was found to be 31.68, 38.58 and 36.81 mg/g, respectively. The adsorption kinetics were investigated with pseudo-first-order and pseudo-second-order model. Adsorption followed the pseudo-second-order rate kinetics. The coefficients of determination for pseudo-second-order kinetic model are >0.99. For continuous adsorption experiments, NNN-MCM-41 adsorbent was used for the removal of nitrate anion from solutions. Breakthrough curves were investigated at different bed heights, flow rates and initial nitrate anion concentrations. The Thomas and Yan models were utilized to calculate the kinetic parameters and to predict the breakthrough curves of different bed height. Results from this study illustrated the potential utility of these adsorbents for nitrate removal from water solution.
Stability analysis of fractional-order generalized chaotic susceptible ...
Indian Academy of Sciences (India)
susceptible–infected–recovered epidemic model and its ... engineering and biology have already been studied by a number of ... In contrast to integer-order ... sures the inhibitory effect, β is the transmission or contact rate, γ is the rate of ...
24 CFR 598.115 - Poverty rate.
2010-04-01
... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false Poverty rate. 598.115 Section 598... Requirements § 598.115 Poverty rate. (a) General. In order to be eligible for designation, an area's poverty... poverty rate must be not less than 20 percent; and (2) For at least 90 percent of the census tracts within...
Inflation Rates, Car Devaluation, and Chemical Kinetics.
Pogliani, Lionello; Berberan-Santos, Mario N.
1996-01-01
Describes the inflation rate problem and offers an interesting analogy with chemical kinetics. Presents and solves the car devaluation problem as a normal chemical kinetic problem where the order of the rate law and the value of the rate constant are derived. (JRH)
Material control and accountability orders
International Nuclear Information System (INIS)
Jewell, D.L.
1988-01-01
The Department of Energy's (DOE) Material Control and Accountability (MC and A) Orders were revised during this past year. The primary focus of the revision process was to eliminate any policy gaps that existed between current orders and the standards and criteria and to examine current policy where questions of completeness or effectiveness may be of concern. The MC and A Subtask Group identified the following three major areas for change: (1) the need to expand the graded safeguards concept; (2) the need to provide for defense in depth; and (3) the need to include system performance requirements. Operational and cost impacts were of primary consideration in these changes. The subtask group accomplished its goal as directed and within the required time frames. The revision process benefitted tremendously from the earlier works of the numerous standards and criteria committees and the Operation Cerberus Committees
DEFF Research Database (Denmark)
Brinkmann, Svend; Musaeus, Peter
2012-01-01
In this paper, we follow Averill, who tells us that emotions reflect “the thought of an epoch, the secret of a civilization”. In this light, to understand the meaning of an emotion is to understand the relevant aspects of the sociocultural systems of which the emotion is a part. We argue...... that a number of the most central emotions in human lives are identified with reference to the moral order of the sociocultural system rather than with reference to physiological conditions or body states. We present a normative theory of emotions and refer to research on “emotionologies” of different cultures...... to demonstrate that specific moral orders are associated with specific forms of emotionality. If properly cultivated, moral emotions become “orientation guides” that enable persons to respond adequately to what happens in their local, moral worlds, and, as researchers, we can only grasp what such emotions...
Higher-Order Program Generation
DEFF Research Database (Denmark)
Rhiger, Morten
for OCaml, a dialect of ML, that provides run-time code generation for OCaml programs. We apply these byte-code combinators in semantics-directed compilation for an imperative language and in run-time specialization using type-directed partial evaluation. Finally, we present an approach to compiling goal......This dissertation addresses the challenges of embedding programming languages, specializing generic programs to specific parameters, and generating specialized instances of programs directly as executable code. Our main tools are higher-order programming techniques and automatic program generation....... It is our thesis that they synergize well in the development of customizable software. Recent research on domain-specific languages propose to embed them into existing general-purpose languages. Typed higher-order languages have proven especially useful as meta languages because they provide a rich...
International Nuclear Information System (INIS)
Soloviev, V.G.
1995-01-01
Order and chaos and order-to-chaos transition are treated in terms of nuclear wave functions. A quasiparticle-phonon interaction is responsible for the fragmentation of one- and many-quasiparticle and phonon states and for the mixing of closely spaced states. Complete damping of one-quasiparticle states cannot be considered as a transition to chaos due to large many-quasiparticle or quasiparticle-phonon terms in their wave functions. An experimental investigation of the strength distribution of many-quasiparticle and quasiparticle-phonon states should uncover a new region of a regularity in nuclei at intermediate excitation energy. A chaotic behaviour of nuclear states can be shifted to higher excitation energies. ((orig.))
Recent advances in ordered intermetallics
International Nuclear Information System (INIS)
Liu, C.T.
1995-01-01
Ordered intermetallic alloys based on aluminides and silicides offer many advantages for structural use at elevated temperatures in hostile environments. Their attractive properties include excellent oxidation and corrosion resistance, light weight, and superior strength at elevated temperatures. The major concern for structural use of intermetallics was their low ductility and poor fracture resistance at ambient temperatures. For the past ten years, considerable effort has been devoted to the research and development of ordered intermetallic alloys, and good progress has been made on understanding intrinsic and extrinsic factors controlling brittle fracture in intermetallic alloys based on aluminides and silicides. Parallel efforts on alloy design have led to the development of a number of ductile and strong intermetallic alloys based on Ni(3)Al, NiAl, Fe(3)Al, FeAl, Ti(3)Al and TiAl systems for structural applications. (orig.)
Large-order perturbation theory
International Nuclear Information System (INIS)
Wu, T.T.
1982-01-01
The original motivation for studying the asymptotic behavior of the coefficients of perturbation series came from quantum field theory. An overview is given of some of the attempts to understand quantum field theory beyond finite-order perturbation series. At least is the case of the Thirring model and probably in general, the full content of a relativistic quantum field theory cannot be recovered from its perturbation series. This difficulty, however, does not occur in quantum mechanics, and the anharmonic oscillator is used to illustrate the methods used in large-order perturbation theory. Two completely different methods are discussed, the first one using the WKB approximation, and a second one involving the statistical analysis of Feynman diagrams. The first one is well developed and gives detailed information about the desired asymptotic behavior, while the second one is still in its infancy and gives instead information about the distribution of vertices of the Feynman diagrams
Second-Order Footsteps Illusions
Directory of Open Access Journals (Sweden)
Akiyoshi Kitaoka
2015-12-01
Full Text Available In the “footsteps illusion”, light and dark squares travel at constant speed across black and white stripes. The squares appear to move faster and slower as their contrast against the stripes varies. We now demonstrate some second-order footsteps illusions, in which all edges are defined by colors or textures—even though luminance-based neural motion detectors are blind to such edges.
Destabilizing the American Racial Order
Hochschild, Jennifer L.; Weaver, Vesla; Burch, Traci
2011-01-01
Are racial disparities in the United States just as deep-rooted as they were before the 2008 presidential election, largely eliminated, or persistent but on the decline? One can easily find all of these pronouncements; rather than trying to adjudicate among them, this essay seeks to identify what is changing in the American racial order, what persists or is becoming even more entrenched, and what is likely to affect the balance between change and continuity. The authors focus on young America...
Multiple sclerosis and birth order.
James, W H
1984-01-01
Studies on the birth order of patients with multiple sclerosis have yielded contradictory conclusions. Most of the sets of data, however, have been tested by biased tests. Data that have been submitted to unbiased tests seem to suggest that cases are more likely to occur in early birth ranks. This should be tested on further samples and some comments are offered on how this should be done. PMID:6707558
Risk Attitudes and Birth Order
Krause, Philipp; Heindl, Johannes; Jung, Andreas; Langguth, Berthold; Hajak, Göran; Sand, Philipp G.
2013-01-01
Risk attitudes play important roles in health behavior and everyday decision making. It is unclear, however, whether these attitudes can be predicted from birth order. We investigated 200 mostly male volunteers from two distinct settings. After correcting for multiple comparisons, for the number of siblings and for confounding by gender, ordinal position predicted perception of health-related risks among participants in extreme sports (p < .01). However, the direction of the effect contradict...
Multiple sclerosis and birth order.
James, W H
1984-01-01
Studies on the birth order of patients with multiple sclerosis have yielded contradictory conclusions. Most of the sets of data, however, have been tested by biased tests. Data that have been submitted to unbiased tests seem to suggest that cases are more likely to occur in early birth ranks. This should be tested on further samples and some comments are offered on how this should be done.
The microstructures of ordered alloys
International Nuclear Information System (INIS)
Sarma, G.M.K.; Ranganathan, S.
1977-01-01
The phenomenon of ordering in substitutional alloys confers special properties on them by introducing various types of structures and structural defects. Some of the important structural defects (translational and rotational antiphase boundaries, dissociated antiphase boundaries and superdislocations) and their observation by various microscopical methods, with particular emphasis on the applications of the electron microscope are described with illustrations drawn from the studies on nickel-molybdenum and nickel-tungsten alloys. (M.G.B.)
Understanding the Current International Order
2016-01-01
a basic conflict between the idea of freedom under a government of laws, and the idea of slavery under the grim oligarchy of the Kremlin . . . . We...such as the India-Brazil-South Africa group of nations) that provide opportunities for more-private dialogues. Region- ally, dozens of forums, such...the beginning—especially during the Cold War, and even afterward. But the order also was based from the start on a vision of the future of world
On Uselessness of Limit Orders
Czech Academy of Sciences Publication Activity Database
Šmíd, Martin
2007-01-01
Roč. 2007, č. 24 (2007), s. 45-57 ISSN 1212-074X R&D Projects: GA ČR GD402/03/H057; GA ČR GA402/07/1113; GA ČR(CZ) GA402/06/1417 Institutional research plan: CEZ:AV0Z10750506 Keywords : market microstructure * limit order market * portfolio selection Subject RIV: AH - Economics
Advanced online food ordering application
VOLER, STAŠ
2015-01-01
The purpose of the thesis was to produce a web application for ordering food (pizzas) online. The thesis mainly focuses on providing the most effective sales possible. For that reason we built a special mechanism for automatic categorisation of pizzas in different categories, which combined with data on a user's past purchases provided a selection of the most appropriate pizzas for that specific user. The first part of the thesis describes the technologies and tools used. In developing t...
Perturbation theory in large order
International Nuclear Information System (INIS)
Bender, C.M.
1978-01-01
For many quantum mechanical models, the behavior of perturbation theory in large order is strikingly simple. For example, in the quantum anharmonic oscillator, which is defined by -y'' + (x 2 /4 + ex 4 /4 - E) y = 0, y ( +- infinity) = 0, the perturbation coefficients, A/sub n/, in the expansion for the ground-state energy, E(ground state) approx. EPSILON/sub n = 0//sup infinity/ A/sub n/epsilon/sup n/, simplify dramatically as n → infinity: A/sub n/ approx. (6/π 3 )/sup 1/2/(-3)/sup n/GAMMA(n + 1/2). Methods of applied mathematics are used to investigate the nature of perturbation theory in quantum mechanics and show that its large-order behavior is determined by the semiclassical content of the theory. In quantum field theory the perturbation coefficients are computed by summing Feynman graphs. A statistical procedure in a simple lambda phi 4 model for summing the set of all graphs as the number of vertices → infinity is presented. Finally, the connection between the large-order behavior of perturbation theory in quantum electrodynamics and the value of α, the charge on the electron, is discussed. 7 figures
Directory of Open Access Journals (Sweden)
Robbins RA
2016-12-01
Full Text Available No abstract available. Article truncated at 150 words. In a research letter to JAMA Metersky and colleagues (1 report that ventilator-associated pneumonia (VAP rates have remained near 10% since 2005. The authors reviewed Medicare Patient Safety Monitoring System (MPSMS data on a representative sample of more than 86,000 critically ill patients treated at 1330 US hospitals between 2005 and 2013. To meet a diagnosis of VAP patients were required to have at least 2 days' ventilation in intensive care units; a chest radiograph with a new finding suggesting pneumonia; a physician diagnosis of pneumonia; and an order for antibiotics. VAP incidence was 10.8% (95% confidence interval, 7.4% - 14.4% during 2005 to 2006 and 9.7% (95% confidence interval, 5.1% - 14.9% during 2012 to 2013. In contrast, data from the CDC's National Healthcare Safety Network (NHSN have shown declines in VAP rates of 71% and 62% in medical and surgical intensive care units, respectively, between 2006 and 2012 …
Kinetics and adsorption isotherm of lactic acid from fermentation broth onto activated charcoal
Directory of Open Access Journals (Sweden)
Seankham Soraya
2017-01-01
Full Text Available Activated charcoal was applied for the recovery of lactic acid in undissociated form from fermentation broth. Lactic acid was obtained from the fermentation of Lactobacillus casei TISTR 1340 using acid hydrolyzed Jerusalem artichoke as a carbon source. The equilibrium adsorption isotherm and kinetics for the lactic acid separation were investigated. The experimental data for lactic acid adsorption from fermentation broth were best described by the Freundlich isotherm and the pseudo-second order kinetics with R2 values of 0.99. The initial adsorption rate was 41.32 mg/g⋅min at the initial lactic acid concentration of 40 g/L.
Evaluation of dyes adsorption properties of TiO2-alginate biohybrid material
International Nuclear Information System (INIS)
Barrón Zambrano, J A; Ávila Ortega, A; Muñoz Rodríguez, D; Carrera Figueiras, C; Sánchez Morales, G
2013-01-01
In this study a TiO 2 -alginate biohybrid material was obtained by the sol gel method and its adsorption properties were compared to those of its precursors using eosin B (anionic) as model dye. The results showed that the TiO 2 and biohybrid have a greater affinity for eosine B than alginate. The maximum adsorption capacity for the eosin B was obtained at pH = 10. Kinetic studies showed that the biohybrid has greater rate and adsorption capacity than its precursors. Kinetic data were fitted to a pseudo-second order kinetic model. The experimental isotherms were fitted to the Langmuir model.
Adsorption of U(VI) onto kaolin studied by batch method
International Nuclear Information System (INIS)
Hongxia Zhang; Zhi Liu; Peizhuo Hu; Tonghuan Liu; Wangsuo Wu
2013-01-01
Adsorption of U(VI) on purified kaolin was studied by batch methods under ambient conditions, including contact time, pH, fulvic acid, etc. Three kinetic models were used to model the kinetic adsorption which was very well described by the pseudo-second-order rate equation, and the activation energy of adsorption was 52.20 kJ/mol. The Freundlich and Dubinin-Radushkevich models fitted the experimental data better than the Langmuir model for the adsorption and desorption isotherms. The thermodynamic parameters indicated that the adsorption of U(VI) on kaolin was an endothermic and spontaneous process. (author)
Multi-Criteria Model for Determining Order Size
Directory of Open Access Journals (Sweden)
Katarzyna Jakowska-Suwalska
2013-01-01
Full Text Available A multi-criteria model for determining the order size for materials used in production has been presented. It was assumed that the consumption rate of each material is a random variable with a known probability distribution. Using such a model, in which the purchase cost of materials ordered is limited, three criteria were considered: order size, probability of a lack of materials in the production process, and deviations in the order size from the consumption rate in past periods. Based on an example, it has been shown how to use the model to determine the order sizes for polyurethane adhesive and wood in a hard-coal mine. (original abstract
Poly(methylmethacrylate) grafted chitosan: An efficient adsorbent for anionic azo dyes
International Nuclear Information System (INIS)
Singh, V.; Sharma, A.K.; Tripathi, D.N.; Sanghi, R.
2009-01-01
Present study reports on peroxydisulfate/ascorbic acid initiated synthesis of Chitosan-graft-poly(methylmethacrylate) (Ch-g-PMMA) and its characterization by FTIR, XRD and 13 C NMR. The copolymer remained water insoluble even under highly acidic conditions and was evaluated to be an efficient adsorbent for the three anionic azo dyes (Procion Yellow MX, Remazol Brilliant Violet and Reactive Blue H5G) over a wide pH range of 4-10 being most at pH 7. The adsorbent was also found efficient in decolorizing the textile industry wastewater and was much more efficient than the parent chitosan. Equilibrium sorption experiments were carried out at different pH and initial dye concentration values. The experimental equilibrium data for each adsorbent-dye system were successfully fitted to the Langmuir and Freundlich sorption isotherms. Based on Langmuir model Q max for yellow, violet and blue dyes was 250, 357 and 178, respectively. Thermodynamic parameters of the adsorption processes such as ΔG o , ΔH o , and ΔS o were calculated. The negative values of free energy reflected the spontaneous nature of adsorption. The adsorption kinetic data of all the three dyes could be well represented by pseudo-second-order model with the correlation coefficients (R 2 ) being 0.9922, 0.9997 and 0.9862, for direct yellow, reactive violet and blue dye, respectively with rate constants 0.91 x 10 -4 , 1.82 x 10 -4 and 1.05 x 10 -4 g mg -1 min -1 , respectively. At pH 7, parent chitosan also showed pseudo-second-order kinetics. The temperature dependence of dye uptake and the pseudo-second-order kinetics of the adsorption indicated that chemisorption is the rate-limiting step that controls the process
Second order pedagogy as an example of second order cybernetics
Directory of Open Access Journals (Sweden)
Anne B. Reinertsen
2012-07-01
Full Text Available This article is about seeing/creating/trying out an idea of pedagogy and pedagogical/ educational research in/as/with self-reflexive, circular and diffractive perspectives and about using second order cybernetics as thinking tool. It is a move away from traditional hypothesis driven activities and a move towards data driven pedagogies and research: Teachers, teacher researchers and researchers simultaneously producing and theorizing our practices and ourselves. Deleuzian becomings- eventually becomings with data - theory - theodata is pivotal. It is a move towards a Derridean bricolage. A different science of pedagogy operating as a circular science of self-reflexivity and diffraction in search of quality again and again and again: Theopractical becomings and inspiractionresearch.
Order statistics & inference estimation methods
Balakrishnan, N
1991-01-01
The literature on order statistics and inferenc eis quite extensive and covers a large number of fields ,but most of it is dispersed throughout numerous publications. This volume is the consolidtion of the most important results and places an emphasis on estimation. Both theoretical and computational procedures are presented to meet the needs of researchers, professionals, and students. The methods of estimation discussed are well-illustrated with numerous practical examples from both the physical and life sciences, including sociology,psychology,a nd electrical and chemical engineering. A co
Ordered bulk degradation via autophagy
DEFF Research Database (Denmark)
Dengjel, Jörn; Kristensen, Anders Riis; Andersen, Jens S
2008-01-01
During amino acid starvation, cells undergo macroautophagy which is regarded as an unspecific bulk degradation process. Lately, more and more organelle-specific autophagy subtypes such as reticulophagy, mitophagy and ribophagy have been described and it could be shown, depending on the experimental...... at proteasomal and lysosomal degradation ample cross-talk between the two degradation pathways became evident. Degradation via autophagy appeared to be ordered and regulated at the protein complex/organelle level. This raises several important questions such as: can macroautophagy itself be specific and what...
China And The International Order
2018-01-01
existing order, it stated that China will “take an active part in reforming and developing 13 Feng Zhang, “Chinese Thinking on the South China Sea and the...interests and those that do not align as closely with U.S. interests. China might be challenging 19 Zhang’s “Chinese Thinking on the South China...China Bets on Sensitive U.S. Start-Ups, Worrying the Pentagon,” New York Times, March 22, 2017a; Paul Mozur and Jane Perlez, “China Tech Investment
Classical higher-order processes
DEFF Research Database (Denmark)
Montesi, Fabrizio
2017-01-01
Classical Processes (CP) is a calculus where the proof theory of classical linear logic types processes à la Π-calculus, building on a Curry-Howard correspondence between session types and linear propositions. We contribute to this research line by extending CP with process mobility, inspired...... by the Higher-Order Π-calculus. The key to our calculus is that sequents are asymmetric: one side types sessions as in CP and the other types process variables, which can be instantiated with process values. The controlled interaction between the two sides ensures that process variables can be used at will......, but always respecting the linear usage of sessions expected by the environment....
DEFF Research Database (Denmark)
Lund, Joachim
Damned if you do - damned if you don't. During the Second World War, the collaboration dilemma regarding Europe's business life came to the forefront as business leaders were faced with the necessity of cooperating with the German enemy in order to maintain production and essing a wide range......, Europe's business life contributed substantially to the Nazi German war effort. It was working for the oachim Lund is an historian, Ph.D. and Associate Professor at the Centre for European Cultural Studies, Copenhagen Business School. He is the author of a number of books and articles on Denmark...
2010-01-01
... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS... INFORMATION Mango Promotion, Research, and Information Order Definitions § 1206.13 Order. Order means an order..., research, and information regarding agricultural commodities authorized under the Act. ...
International Nuclear Information System (INIS)
Benderitter, Marc; Perales, Frederic; Monerie, Yann; Maro, Denis; Boyer, Patrick; Lemaitre, Pascal; Porcheron, Emmanuel; Depuydt, Guillaume; Masson, Olivier; Gensdarmes, Francois
2013-04-01
This publication presents the main results of researches undertaken by the IRSN in the field of radiation protection, nuclear safety and security. The topics herein addressed are: radio-induced lesions as a new step towards healing (case of injection mesenchymal stem cells for the treatment of induced severe colorectal lesions), the modelling of the collapse of an immersed grain column (to study the nuclear fuel behaviour in an accidental situation through a modelling of fluid-grain interactions), a better understanding of radioactive aerosol deposit (to study particle or aerosol deposits after radioactive releases in the atmosphere in case of accident), a better modelling of soot deposits (in case of fire), the prediction of leakage rates of containment enclosures (ageing phenomena of installations, systems and equipment, with the case of cracks due to material ageing and resulting in confinement losses which could thus be quantified)
Taghavi, Mahmoud; Zazouli, Mohammad Ali; Yousefi, Zabihollah; Akbari-adergani, Behrouz
2015-11-01
In this study, multi-walled carbon nanotubes were functionalized by L-cysteine to show the kinetic and isotherm modeling of Cd (II) ions onto L-cysteine functionalized multi-walled carbon nanotubes. The adsorption behavior of Cd (II) ion was studied by varying parameters including dose of L-MWCNTs, contact time, and cadmium concentration. Equilibrium adsorption isotherms and kinetics were also investigated based on Cd (II) adsorption tests. The results showed that an increase in contact time and adsorbent dosage resulted in increase of the adsorption rate. The optimum condition of the Cd (II) removal process was found at pH=7.0, 15 mg/L L-MWCNTs dosage, 6 mg/L cadmium concentration, and contact time of 60 min. The removal percent was equal to 89.56 at optimum condition. Langmuir and Freundlich models were employed to analyze the experimental data. The data showed well fitting with the Langmuir model (R2=0.994) with q max of 43.47 mg/g. Analyzing the kinetic data by the pseudo-first-order and pseudo-second-order equations revealed that the adsorption of cadmium using L-MWSNTs following the pseudo-second-order kinetic model with correlation coefficients (R2) equals to 0.998, 0.992, and 0.998 for 3, 6, and 9 mg/L Cd (II) concentrations, respectively. The experimental data fitted very well with the pseudo-second-order. Overall, treatment of polluted solution to Cd (II) by adsorption process using L-MWCNT can be considered as an effective technology.
Directory of Open Access Journals (Sweden)
Saveliev Peter
2005-01-01
Full Text Available Suppose , are manifolds, are maps. The well-known coincidence problem studies the coincidence set . The number is called the codimension of the problem. More general is the preimage problem. For a map and a submanifold of , it studies the preimage set , and the codimension is . In case of codimension , the classical Nielsen number is a lower estimate of the number of points in changing under homotopies of , and for an arbitrary codimension, of the number of components of . We extend this theory to take into account other topological characteristics of . The goal is to find a "lower estimate" of the bordism group of . The answer is the Nielsen group defined as follows. In the classical definition, the Nielsen equivalence of points of based on paths is replaced with an equivalence of singular submanifolds of based on bordisms. We let , then the Nielsen group of order is the part of preserved under homotopies of . The Nielsen number of order is the rank of this group (then . These numbers are new obstructions to removability of coincidences and preimages. Some examples and computations are provided.
International Nuclear Information System (INIS)
Donos, Aristomenis; Gauntlett, Jerome P; Pantelidou, Christiana
2014-01-01
We construct electrically charged, asymptotically AdS 5 black hole solutions that are dual to d = 4 CFTs in a superfluid phase with either p-wave or (p + ip)-wave order. The two types of black holes have non-vanishing charged two-form in the bulk and appear at the same critical temperature in the unbroken phase. Both the p-wave and the (p + ip)-wave phase can be thermodynamically preferred, depending on the mass and charge of the two-form, and there can also be first order transitions between them. The p-wave black holes have a helical structure and some of them exhibit the phenomenon of pitch inversion as the temperature is decreased. Both the p-wave and the (p + ip)-wave black holes have zero entropy density ground states at zero temperature and we identify some new ground states which exhibit scaling symmetry, including a novel scenario for the emergence of conformal symmetry in the IR. (paper)
Ordered random variables theory and applications
Shahbaz, Muhammad Qaiser; Hanif Shahbaz, Saman; Al-Zahrani, Bander M
2016-01-01
Ordered Random Variables have attracted several authors. The basic building block of Ordered Random Variables is Order Statistics which has several applications in extreme value theory and ordered estimation. The general model for ordered random variables, known as Generalized Order Statistics has been introduced relatively recently by Kamps (1995).
National supply-chain survey of drug manufacturer back orders.
Wellman, G S
2001-07-01
The impact of manufacturer back orders on the supply chain for pharmaceuticals in the institutional setting was studied. A questionnaire was distributed during May and June 2000 to 600 institutional pharmacies affiliated with a major national drug and supply group purchasing organization. The instrument included questions on basic institutional demographics, perceptions about the frequency of manufacturer back orders for pharmaceuticals, the quality of communication with manufacturers and wholesalers about back orders, the two most significant back orders that had occurred in the 12 months preceding the survey, and the reasons for and impact of back orders. A total of 170 usable surveys were returned (net response rate, 28.3%). Reported manufacturer back orders included an array of drug classes, including blood products, antimicrobials, antiarrhythmics, benzodiazepine antagonists, thrombolytics, corticosteroids, and antihypertensives. Respondents perceived significant back orders as increasing in frequency. Communication by manufacturers and wholesalers about back orders was reported to be relatively poor. A raw-material shortage was the most common reason given by manufacturers for back orders (36.5%), followed by a regulatory issue (23.2%). In most cases (92%), medical staff members had to be contacted, indicating an interruption in the normal drug distribution process. In over a third of instances, respondents stated that the back order resulted in less optimal therapy. A survey found that manufacturer back orders for pharmaceuticals were increasing in frequency and that information flow within the supply chain was insufficient to meet the needs of end users.
High Order Modulation Protograph Codes
Nguyen, Thuy V. (Inventor); Nosratinia, Aria (Inventor); Divsalar, Dariush (Inventor)
2014-01-01
Digital communication coding methods for designing protograph-based bit-interleaved code modulation that is general and applies to any modulation. The general coding framework can support not only multiple rates but also adaptive modulation. The method is a two stage lifting approach. In the first stage, an original protograph is lifted to a slightly larger intermediate protograph. The intermediate protograph is then lifted via a circulant matrix to the expected codeword length to form a protograph-based low-density parity-check code.
DEFF Research Database (Denmark)
Braüner, Torben
2011-01-01
Hybrid logic is an extension of modal logic which allows us to refer explicitly to points of the model in the syntax of formulas. It is easy to justify interest in hybrid logic on applied grounds, with the usefulness of the additional expressive power. For example, when reasoning about time one...... often wants to build up a series of assertions about what happens at a particular instant, and standard modal formalisms do not allow this. What is less obvious is that the route hybrid logic takes to overcome this problem often actually improves the behaviour of the underlying modal formalism....... For example, it becomes far simpler to formulate proof-systems for hybrid logic, and completeness results can be proved of a generality that is simply not available in modal logic. That is, hybridization is a systematic way of remedying a number of known deficiencies of modal logic. First-order hybrid logic...
Narrating Global Order and Disorder
Directory of Open Access Journals (Sweden)
Matthew Levinger
2017-09-01
Full Text Available This thematic issue addresses how strategic narratives affect international order. Strategic narratives are conceived of as stories with a political purpose or narratives used by political actors to affect the behavior of others. The articles in this issue address two significant areas important to the study of international relations: how strategic narratives support or undermine alliances, and how they affect norm formation and contestation. Within a post-Cold War world and in the midst of a changing media environment, strategic narratives affect how the world and its complex issues are understood. This special issue speaks to the difficulties associated with creating creative and committed international cooperation by noting how strategic narratives are working to shape the Post-Cold War international context.
Dependency Ordering of Atomic Observables
Cīrulis, Jānis
2015-12-01
The notion of atomic observable was introduced by S.Gudder for effect test spaces in 1997. In this paper an observable is a σ-homomorphism from the Borel algebra on a line to some logic. Roughly, an observable on a logic is atomic, if it is completely determined by its restriction to one-element subsets of its point spectrum. In particular, every discrete observable is atomic. We study some elementary properties of such observables, and discuss a possible notion of functional dependency between them. Algebraically, a dependency is a certain preorder relation on the set of all atomic observables, which induces an order relation on the set of all maximal orthogonal subsets of the logic. Several properties, as well as characteristics in terms of the underlying logic, of these relations are stated.
Mesoporous hydroxyapatite: Preparation, drug adsorption, and release properties
Energy Technology Data Exchange (ETDEWEB)
Gu, Lina; He, Xiaomei; Wu, Zhenyu, E-mail: zhenyuwuhn@sina.com
2014-11-14
Mesoporous hydroxyapatite (HA) was synthesized through gas–liquid chemical precipitation method at ambient temperature without any template. Structure, morphology and pore size distribution of HA were analyzed via X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, high-resolution electron microscopy and N{sub 2} adsorption/desorption. The chemotherapeutic agent doxorubicin (DOX) was used to investigate the drug adsorption and release behavior of HA. The kinetics of DOX adsorption on HA followed the pseudo-second-order rate expression. Adsorption isotherms at various temperatures were obtained, and the equilibrium data fitted the Langmuir model. The values of thermodynamic parameters (Gibbs free energy, entropy, and enthalpy changes) demonstrated that the adsorption process was spontaneous and endothermic. In vitro pH-responsive (pH = 7.4, 5.8) controlled release was investigated. DOX-loaded HA showed a slow, long-term, and steady release rate. The release rate at pH5.8 was larger than that at pH7.4. Consequently, the as-prepared mesoporous HA has potential applications in controlled drug delivery systems. - Highlights: • Mesoporous HA was synthesized by a simple precipitation method without any template. • The kinetics of adsorption followed the pseudo-second-order rate expression. • Thermodynamics investigation showed that adsorption was spontaneous and endothermic. • DOX-loaded HA showed a long-term, steady, and pH-controlled release rate.
ETPM starts up again with new orders
International Nuclear Information System (INIS)
Anon.
1996-01-01
According to the expectations, ETPM's turnover has significantly decreased from 1994 to 1995 (from 2572 to 1372 MF (millions of French Francs)) because of a reduction of petroleum investments in North Sea. However, the rate of profitability could be maintained with a 51 MF profit and the company has gained new confidence in the year 1996 according to the new orders recorded and which totalize 3.2 GF (billions of French Francs). Thus a 1580 MF of turnover is expected for 1996, which should increase to 1800 MF in 1997. This short paper summarizes the main significant realizations of the company in 1995, mainly in Africa (Congo, Angola, Nigeria), for its first year of association with McDermott, and the new 1996 contracts of McDermott-ETPM International in Myanmar, Indonesia, North Sea and Nigeria. (J.S.)
DEFF Research Database (Denmark)
Haedersdal, C; Pedersen, F H; Svendsen, J H
1992-01-01
after the myocardial infarction. A significant correlation (Spearman's correlation coefficient rs, p less than 0.05) was found between LVEF at rest and the following variables assessed at exercise test: 1) the heart rate at rest, 2) rise in heart rate, 3) ratio between maximal heart rate and heart rate...... at rest, 4) rise in systolic blood pressure, 5) rate pressure product at rest, 6) rise in rate pressure product, 7) ratio (rHR) between maximal rate pressure product and rate pressure product at rest, 8) total exercise time. The heart rate was corrected for effects caused by age (heart index (HR...
Directory of Open Access Journals (Sweden)
Mehrnaz Ghoochian
2016-04-01
Full Text Available Background: Synthetic dyes are serious pollutants and wide ranges of methods have been employed for their removal from aquatic systems. We studied the adsorption of "Nile blue A" (NBA, an anionic dye, from aqueous solution by oxidized multi-walled carbon nanotubes (MWCNTs. Methods: Scanning electron microscope and Fourier transform infrared spectroscopy were used to characterize function groups produced at MWCNTs surface. Kinetics and adsorption isotherms of NBA, the effect of temperature, pH, contact time and initial dosage of nanotubes on the adsorption capacity were also assessed. The experimental data were analyzed by Langmuir and Freundlich models. Results: Most of the dye was removed in the first 5 min and best adsorption percentage was at pH 7.0. The equilibrium reached at 45 min. The experimental data were analyzed by Langmuir and Freundlich models and the results fitted well with the Freundlich model. The adsorption kinetic data were analyzed using first-order and the pseudo-second order model and the adsorption kinetic data of NBA dye onto MWCNTs fitted the pseudo-second order model. The maximum adsorption capacity was obtained as 169.49 mg g-1. Conclusion: Freundlich model suggested that the adsorption process followed heterogeneous distribution onto MWCNTs and pseudo-second model of adsorption implied that chemical processes controlled the rate-controlling step. Oxidized MWCNTs could be used as an effective adsorbent for the removal of "Nile Blue A" dye. Oxidization of MWCNTs by nitric acid, improves the efficiency of NBA removal due to increases in functional groups and total number of adsorption sites.
Directory of Open Access Journals (Sweden)
Peter Saveliev
2005-04-01
Full Text Available Suppose X, Y are manifolds, f,g:XÃ¢Â†Â’Y are maps. The well-known coincidence problem studies the coincidence set C={x:f(x=g(x}. The number m=dimÃ¢Â€Â‰XÃ¢ÂˆÂ’dimÃ¢Â€Â‰Y is called the codimension of the problem. More general is the preimage problem. For a map f:XÃ¢Â†Â’Z and a submanifold Y of Z, it studies the preimage set C={x:f(xÃ¢ÂˆÂˆY}, and the codimension is m=dimÃ¢Â€Â‰X+dimÃ¢Â€Â‰YÃ¢ÂˆÂ’dimÃ¢Â€Â‰Z. In case of codimension 0, the classical Nielsen number N(f,Y is a lower estimate of the number of points in C changing under homotopies of f, and for an arbitrary codimension, of the number of components of C. We extend this theory to take into account other topological characteristics of C. The goal is to find a Ã¢Â€Âœlower estimateÃ¢Â€Â of the bordism group ÃŽÂ©p(C of C. The answer is the Nielsen group Sp(f,Y defined as follows. In the classical definition, the Nielsen equivalence of points of C based on paths is replaced with an equivalence of singular submanifolds of C based on bordisms. We let Sp'(f,Y=ÃŽÂ©p(C/Ã¢ÂˆÂ¼N, then the Nielsen group of order p is the part of Sp'(f,Y preserved under homotopies of f. The Nielsen number Np(F,Y of order p is the rank of this group (then N(f,Y=N0(f,Y. These numbers are new obstructions to removability of coincidences and preimages. Some examples and computations are provided.
Synchronization from Second Order Network Connectivity Statistics
Zhao, Liqiong; Beverlin, Bryce; Netoff, Theoden; Nykamp, Duane Q.
2011-01-01
We investigate how network structure can influence the tendency for a neuronal network to synchronize, or its synchronizability, independent of the dynamical model for each neuron. The synchrony analysis takes advantage of the framework of second order networks, which defines four second order connectivity statistics based on the relative frequency of two-connection network motifs. The analysis identifies two of these statistics, convergent connections, and chain connections, as highly influencing the synchrony. Simulations verify that synchrony decreases with the frequency of convergent connections and increases with the frequency of chain connections. These trends persist with simulations of multiple models for the neuron dynamics and for different types of networks. Surprisingly, divergent connections, which determine the fraction of shared inputs, do not strongly influence the synchrony. The critical role of chains, rather than divergent connections, in influencing synchrony can be explained by their increasing the effective coupling strength. The decrease of synchrony with convergent connections is primarily due to the resulting heterogeneity in firing rates. PMID:21779239
Sorption kinetics of diuron on volcanic ash derived soils.
Cáceres-Jensen, Lizethly; Rodríguez-Becerra, Jorge; Parra-Rivero, Joselyn; Escudey, Mauricio; Barrientos, Lorena; Castro-Castillo, Vicente
2013-10-15
Diuron sorption kinetic was studied in Andisols, Inceptisol and Ultisols soils in view of their distinctive physical and chemical properties: acidic pH and variable surface charge. Two types of kinetic models were used to fit the experimental dates: those that allow to establish principal kinetic parameters and modeling of sorption process (pseudo-first-order, pseudo-second-order), and some ones frequently used to describe solute transport mechanisms of organic compounds on different sorbents intended for remediation purposes (Elovich equation, intraparticle diffusion, Boyd, and two-site nonequilibrium models). The best fit was obtained with the pseudo-second-order model. The rate constant and the initial rate constant values obtained through this model demonstrated the behavior of Diuron in each soil, in Andisols were observed the highest values for both parameters. The application of the models to describe solute transport mechanisms allowed establishing that in all soils the mass transfer controls the sorption kinetic across the boundary layer and intraparticle diffusion into macropores and micropores. The slowest sorption rate was observed on Ultisols, behavior which must be taken into account when the leaching potential of Diuron is considered. Copyright © 2013 Elsevier B.V. All rights reserved.
Directory of Open Access Journals (Sweden)
Mohammad Kazem Bahrami
2016-09-01
Full Text Available Nanocomposite hydrogels based on kappa-carrageenan were synthesized by incorporating natural sodium montmorillonite (Cloisite nanoclay. Acrylamide (AAm and methylenebisacrylamide (MBA were used as a monomer and a crosslinker, respectively. Effects of reaction variables on the swelling kinetics were studied. The results revealed that the rate of swelling for nanocomposites with high content of MBA was higher than those of nanocomposites consisting of low content of MBA. Similar to the effect of MBA, the rate of swelling enhanced as the carrageenan content was decreased. The influence of clay content on swelling rate was not remarkable. The experimental swelling data were evaluated by pseudo-first-order and pseudo-second-order kinetic models. The swelling data described well by pseudo-second-order kinetic model. Sequestrene Fe 138 (Sq as an agrochemical was loaded into nanocomposites and releasing of this active agent from nanocomposites was studied. The clay-free hydrogel released the whole loaded Sq; whereas the presence of clay restricted the release of Sq.
International Nuclear Information System (INIS)
Fil, B.A.; Ozmetn, C.
2012-01-01
In the study, montmorillonite was used as an adsorbent for the removal of methylene blue (MB) from aqueous solutions. Batch studies were performed to address various experimental parameters like contact time, pH, temperature, stirring speed, ionic strength, adsorbent dosage and initial concentration for the removal of this dye. Adsorption rate increased with the increase in initial dye concentration, ionic strength, stirring speed, pH and temperature. Kinetic study showed that the adsorption of dye on montmorillonite was a gradual process. Quasi-equilibrium reached in 3 h. Pseudo-first-order, pseudo-second-order, Elovich, Bangham, mass transfer and intra-particle particle diffusion models were used to fit the experimental data. Pseudo-second-order rate equation was able to provide realistic description of adsorption kinetics. Intra-particle diffusion process was identified as the main mechanism controlling the rate of the dye sorption. The diffusion coefficient, D, was found to increase when the stirring speed, ionic strength and temperature were raised. Thermodynamic activation parameters such as delt G, delt S and del H were also calculated. (author)
Directory of Open Access Journals (Sweden)
Sandić Zvjezdana P.
2014-01-01
Full Text Available In this paper, macroporous glycidyl methacrylate and ethylene glycol dimethacrylate copolymer functionalized with diethylene triamine [PGME-deta], was evaluated as Reactive Black 5 (RB5 sorbent. Batch RB5 removal from aqueous solution by PGME-deta was investigated by varying pH, contact time, sorbent dosage, initial dye concentration and temperature. The sorption is pH sensitive having maximum at pH 2 (dye removal of 85%, decreasing with the increase of pH (dye removal of 24% at pH=11 after 60 min. Sorption kinetics was fitted to chemical-reaction and particle-diffusion models (pseudo-first-order, pseudo-second-order, intraparticle diffusion and Mckay models. The pseudo-second-order kinetic model accurately predicted the RB5 amount sorbed under all investigated operating conditions, while the intraparticle diffusion was the dominant rate-limiting mechanism. The diffusion mechanism was more prevalent with the decrease in temperature and the increase in concentration. The isotherm data was best fitted with the Langmuir model, indicating homogeneous distribution of active sites on PGME-deta and monolayer sorption, with the maximum sorption capacity of 353 mg g-1. The calculated sorption rates improved with increasing temperature and an activation energy close to 40 kJ mol-1 was determined, suggesting that chemisorption was also rate-controlling. [Projekat Ministarstva nauke Republike Srbije, br. III 43009, br. TR 37021 i br. III 45001
Montgomery County of Maryland — The Levy Year 2012 real property tax rate dataset reflects all the rates per $100 set each year by the County Council. These rates are applied to the assessed value...
Pension Benefit Guaranty Corporation — These interest rates are used to value vested benefits for variable rate premium purposes as described in PBGC's regulation on Premium Rates (29 CFR Part 4006) and...
Ordering Strategy for Fresh Agricultural Products in External Financing Condition
Institute of Scientific and Technical Information of China (English)
Wenyi; DU
2014-01-01
This paper firstly introduced the two stage supply chain consisting of single agricultural product producer and fund restraint retailer.Then,it analyzed the influence of bank interest rate on order quantity,wholesale price and expected profit of retailer and producer on the condition of retailer taking external loan strategy.Studies have shown that when the bank interest rate is in(0,0.9),the order quantity of agricultural products is a decreasing function of bank interest rate; when the bank interest rate is in(0,1),wholesale price of agricultural products decreases with increase in the bank interest rate; when the bank interest rate is in(0,0.6),the expected profit of retailer is a decreasing function of bank interest rate; when the bank interest rate is in(0,1),the expected profit of producer decreases with increase in the bank interest rate.Finally,through simulation calculation examples,it verified suitability of the conclusion,in the hope of providing reference and application value for management of supply chain.
Ordering in classical Coulombic systems
International Nuclear Information System (INIS)
Schiffer, J. P.
1998-01-01
The author discusses the properties of classical Coulombic matter at low temperatures. It has been well known for some time [1,2] that infinite Coulombic matter will crystallize in body-centered cubic form when the quantity Λ (the dimensionless ratio of the average two-particle Coulomb energy to the kinetic energy per particle) is larger than approximately175. But the systems of such particles that have been produced in the laboratory in ion traps, or ion beams, are finite with surfaces defined by the boundary conditions that have to be satisfied. This results in ion clouds with sharply defined curved surfaces, and interior structures that show up as a set of concentric layers that are parallel to the outer surface. The ordering does not appear to be cubic, but the charges on each shell exhibit a ''hexatic'' pattern of equilateral triangles that is the characteristic of liquid crystals. The curvature of the surfaces prevents the structures on successive shells from interlocking in any simple fashion. This class of structures was first found in simulations [3] and later in experiments [4
Resilience and Higher Order Thinking
Directory of Open Access Journals (Sweden)
Ioan Fazey
2010-09-01
Full Text Available To appreciate, understand, and tackle chronic global social and environmental problems, greater appreciation of the importance of higher order thinking is required. Such thinking includes personal epistemological beliefs (PEBs, i.e., the beliefs people hold about the nature of knowledge and how something is known. These beliefs have profound implications for the way individuals relate to each other and the world, such as how people understand complex social-ecological systems. Resilience thinking is an approach to environmental stewardship that includes a number of interrelated concepts and has strong foundations in systemic ways of thinking. This paper (1 summarizes a review of educational psychology literature on PEBs, (2 explains why resilience thinking has potential to facilitate development of more sophisticated PEBs, (3 describes an example of a module designed to teach resilience thinking to undergraduate students in ways conducive to influencing PEBs, and (4 discusses a pilot study that evaluates the module's impact. Theoretical and preliminary evidence from the pilot evaluation suggests that resilience thinking which is underpinned by systems thinking has considerable potential to influence the development of more sophisticated PEBs. To be effective, however, careful consideration of how resilience thinking is taught is required. Finding ways to encourage students to take greater responsibility for their own learning and ensuring close alignment between assessment and desired learning outcomes are particularly important.
Advanced ordered intermetallic alloy deployment
Energy Technology Data Exchange (ETDEWEB)
Liu, C.T.; Maziasz, P.J.; Easton, D.S. [Oak Ridge National Lab., TN (United States)
1997-04-01
The need for high-strength, high-temperature, and light-weight materials for structural applications has generated a great deal of interest in ordered intermetallic alloys, particularly in {gamma}-based titanium aluminides {gamma}-based TiAl alloys offer an attractive mix of low density ({approximately}4g/cm{sup 3}), good creep resistance, and high-temperature strength and oxidation resistance. For rotating or high-speed components. TiAl also has a high damping coefficient which minimizes vibrations and noise. These alloys generally contain two phases. {alpha}{sub 2} (DO{sub 19} structure) and {gamma} (L 1{sub 0}), at temperatures below 1120{degrees}C, the euticoid temperature. The mechanical properties of TiAl-based alloys are sensitive to both alloy compositions and microstructure. Depending on heat-treatment and thermomechanical processing, microstructures with near equiaxed {gamma}, a duplex structure (a mix of the {gamma} and {alpha}{sub 2} phases) can be developed in TiAl alloys containing 45 to 50 at. % Al. The major concern for structural use of TiAl alloys is their low ductility and poor fracture resistance at ambient temperatures. The purpose of this project is to improve the fracture toughness of TiAl-based alloys by controlling alloy composition, microstructure and thermomechanical treatment. This work is expected to lead to the development of TiAl alloys with significantly improved fracture toughness and tensile ductility for structural use.
Finite difference order doubling in two dimensions
International Nuclear Information System (INIS)
Killingbeck, John P; Jolicard, Georges
2008-01-01
An order doubling process previously used to obtain eighth-order eigenvalues from the fourth-order Numerov method is applied to the perturbed oscillator in two dimensions. A simple method of obtaining high order finite difference operators is reported and an odd parity boundary condition is found to be effective in facilitating the smooth operation of the order doubling process
Order Entry Protocols Are an Amenable Target for Workflow Automation.
Tudor, James; Klochko, Chad; Patel, Milind; Siegal, Daniel
2018-04-21
Order entry protocol selection of advanced imaging studies is labor-intensive, can disrupt workflow, and may displace staff from more valuable tasks. The aim of this study was to explore and compare the behaviors of radiologic technologists and radiologists when determining protocol to identify opportunities for workflow automation. A data set of over 273,000 cross-sectional examination orders from four hospitals within our health system was created. From this data set, we isolated the 12 most frequently requested examinations, which represent almost 50% of the entirety of advanced imaging volume. Intergroup comparisons were made between behavior of radiologic technologists and radiologists or residents when determining protocol. Frequencies of changes were calculated. Common parameters of changed examinations were identified. The overall change rate for both radiologists and residents (4%) is very low and comparable to the overall change rate of radiologic technologists (1%). The change rates for the 12 most ordered examinations were calculated and compared individually. Most examinations that underwent change involved a patient with a low estimated glomerular filtration rate, a patient with a contrast allergy, or a provider ordering a general examination but in fact wanting an organ-specific protocol or an angiographic study. Order entry protocol selection of the most frequently ordered advanced imaging examinations was rarely a value-added activity because these examinations are rarely changed. Changes follow predictable patterns that make order entry protocol selection of most radiology orders for advanced imaging amenable to workflow automation. Copyright © 2018 American College of Radiology. Published by Elsevier Inc. All rights reserved.
Dynamics of platicons due to third-order dispersion
Lobanov, Valery E.; Cherenkov, Artem V.; Shitikov, Artem E.; Bilenko, Igor A.; Gorodetsky, Michael L.
2017-07-01
Dynamics of platicons caused by the third-order dispersion is studied. It is shown that under the influence of the third-order dispersion platicons obtain angular velocity depending both on dispersion and on detuning value. A method of tuning of platicon associated optical frequency comb repetition rate is proposed. Contribution to the Topical Issue "Theory and Applications of the Lugiato-Lefever Equation", edited by Yanne K. Chembo, Damia Gomila, Mustapha Tlidi, Curtis R. Menyuk.
Fractional-Order Control of Pneumatic Position Servosystems
Junyi, Cao; Binggang, Cao
2011-01-01
A fractional-order control strategy for pneumatic position servosystem is presented in this paper. The idea of the fractional calculus application to control theory was introduced in many works, and its advantages were proved. However, the realization of fractional-order controllers for pneumatic position servosystems has not been investigated. Based on the relationship between the pressure in cylinder and the rate of mass flow into the cylinder, the dynamic model of pneumatic position servo ...
Order-constrained linear optimization.
Tidwell, Joe W; Dougherty, Michael R; Chrabaszcz, Jeffrey S; Thomas, Rick P
2017-11-01
Despite the fact that data and theories in the social, behavioural, and health sciences are often represented on an ordinal scale, there has been relatively little emphasis on modelling ordinal properties. The most common analytic framework used in psychological science is the general linear model, whose variants include ANOVA, MANOVA, and ordinary linear regression. While these methods are designed to provide the best fit to the metric properties of the data, they are not designed to maximally model ordinal properties. In this paper, we develop an order-constrained linear least-squares (OCLO) optimization algorithm that maximizes the linear least-squares fit to the data conditional on maximizing the ordinal fit based on Kendall's τ. The algorithm builds on the maximum rank correlation estimator (Han, 1987, Journal of Econometrics, 35, 303) and the general monotone model (Dougherty & Thomas, 2012, Psychological Review, 119, 321). Analyses of simulated data indicate that when modelling data that adhere to the assumptions of ordinary least squares, OCLO shows minimal bias, little increase in variance, and almost no loss in out-of-sample predictive accuracy. In contrast, under conditions in which data include a small number of extreme scores (fat-tailed distributions), OCLO shows less bias and variance, and substantially better out-of-sample predictive accuracy, even when the outliers are removed. We show that the advantages of OCLO over ordinary least squares in predicting new observations hold across a variety of scenarios in which researchers must decide to retain or eliminate extreme scores when fitting data. © 2017 The British Psychological Society.
Higher order field equations. II
International Nuclear Information System (INIS)
Tolhoek, H.A.
1977-01-01
In a previous paper wave propagation was studied according to a sixth-order partial differential equation involving a complex mass M. The corresponding Yang-Feldman integral equations (indicated as SM-YF-equations), were formulated using modified Green's functions Gsub(R)sup(M)(x) and Gsub(A)sup(M)(x), which then incorporate the partial differential equation together with certain boundary conditions. In this paper certain limit properties of these modified Green's functions are derived: (a) It is shown that for mod(M)→infinity the Green's functions Gsub(R)sup(M)(x) and Gsub(A)sup(M)(x) approach the Green's functions Δsub(R)(x) and Δsub(A)(x) of the corresponding KG-equation (Klein-Gordon equation). (b) It is further shown that the asymptotic behaviour of Gsub(R)sup(M)(x) and Gsub(A)sup(M)(x) is the same as of Δsub(R)(x) and Δsub(A)(x)-and also the same as for Dsub(R)(x) and Dsub(A)(x) for t→+-infinity;, where Dsub(R) and Dsub(A) are the Green's functions for the KG-equation with mass zero. It is essential to take limits in the sense of distribution theory in both cases (a) and (b). The property (b) indicates that the wave propagation properties of the SM-YF-equations, the KG-equation with finite mass and the KG-equation with mass zero are closely related in an asymptotic sense. (Auth.)
Army Industrial Fund Rate Stabilization Program.
1986-11-01
orders. Most cost reimbursable orders fall outside of the four exclusions authorized by the revised DA policy on fixed rate orders. Of the cost reimbur ... reimbursable programs. , . 20 DISTRIBUTION/AVAILABILITY OF ABSTRArT 21 ABSTRACT SECURITY CLASSIFICATION M UNCLASSIFIED/UNLIMITED 0 SAME AS RPT - DTIC USERS...customers who reimburse the fund. Industrial funds are intended to be self-sustaining. Department of Defense (DOD) policy as enumerated in DOD
Directory of Open Access Journals (Sweden)
M. Mourabet
2015-11-01
Full Text Available A study on the adsorption of fluoride onto hydroxyapatite was conducted and the process parameters were optimized using Response Surface Methodology (RSM. Hydroxyapatite has been characterized by using different physicochemical methods. In order to determine the effects of process parameters namely temperature (20–40 °C, initial solution pH (4–11, adsorbent dose (0.1–0.3 g and initial fluoride concentration (10–20 mg L−1 on fluoride uptake from aqueous solution, a three-level, four-factor, Box–Behnken design has been employed. The second order mathematical model was developed by regression analysis of the experimental data obtained from 29 batch runs. The optimum pH, temperature, adsorbent dose and initial concentration were found by desirability function to be 4.16, 39.02 °C, 0.28 g and 20 mg L−1, respectively. Fluoride removal was 86.34% at the optimum combination of process parameters. Dynamic adsorption data were applied to pseudo-first-order and pseudo-second-order rate equations. The time data fitted well to pseudo second order kinetic model. According to the correlation coefficients, the adsorption of fluoride on the hydroxyapatite was correlated well with the Langmuir and Freundlich models.
Rating Movies and Rating the Raters Who Rate Them.
Zhou, Hua; Lange, Kenneth
2009-11-01
The movie distribution company Netflix has generated considerable buzz in the statistics community by offering a million dollar prize for improvements to its movie rating system. Among the statisticians and computer scientists who have disclosed their techniques, the emphasis has been on machine learning approaches. This article has the modest goal of discussing a simple model for movie rating and other forms of democratic rating. Because the model involves a large number of parameters, it is nontrivial to carry out maximum likelihood estimation. Here we derive a straightforward EM algorithm from the perspective of the more general MM algorithm. The algorithm is capable of finding the global maximum on a likelihood landscape littered with inferior modes. We apply two variants of the model to a dataset from the MovieLens archive and compare their results. Our model identifies quirky raters, redefines the raw rankings, and permits imputation of missing ratings. The model is intended to stimulate discussion and development of better theory rather than to win the prize. It has the added benefit of introducing readers to some of the issues connected with analyzing high-dimensional data.
Evaporation rate of nucleating clusters.
Zapadinsky, Evgeni
2011-11-21
The Becker-Döring kinetic scheme is the most frequently used approach to vapor liquid nucleation. In the present study it has been extended so that master equations for all cluster configurations are included into consideration. In the Becker-Döring kinetic scheme the nucleation rate is calculated through comparison of the balanced steady state and unbalanced steady state solutions of the set of kinetic equations. It is usually assumed that the balanced steady state produces equilibrium cluster distribution, and the evaporation rates are identical in the balanced and unbalanced steady state cases. In the present study we have shown that the evaporation rates are not identical in the equilibrium and unbalanced steady state cases. The evaporation rate depends on the number of clusters at the limit of the cluster definition. We have shown that the ratio of the number of n-clusters at the limit of the cluster definition to the total number of n-clusters is different in equilibrium and unbalanced steady state cases. This causes difference in evaporation rates for these cases and results in a correction factor to the nucleation rate. According to rough estimation it is 10(-1) by the order of magnitude and can be lower if carrier gas effectively equilibrates the clusters. The developed approach allows one to refine the correction factor with Monte Carlo and molecular dynamic simulations.
Nucleation of relativistic first-order phase transitions
International Nuclear Information System (INIS)
Csernai, L.P.; Kapusta, J.I.
1992-01-01
The authors apply the general formalism of Langer to compute the nucleation rate for systems of relativistic particles with zero or small baryon number density and which undergo first-order phase transitions. In particular, the pre-exponential factor is computed and it is proportional to the viscosity. The initial growth rate of a critical size bubble or droplet is limited by the ability of dissipative processes to transport latent heat away from the surface. 30 refs., 4 figs
US gas pipelines respond to FERC Order 636
International Nuclear Information System (INIS)
Anon.
1992-01-01
This paper reports that U.S. pipelines are continuing to examine the react to the Federal Energy Regulatory Commission's Order 636. Among the latest responses: Bill Vititoe, president and chief executive officer of ANR Pipeline Co., a subsidiary of Coastal Corp., Houston, the his company's recently proposed comprehensive service restructuring and rate settlement basically is consistent with Order 636. Paul M. Anderson, executive vice-president of Panhandle Eastern Corp., Houston, the Order 63 likely will increase reliance on long term gas sales contracts and shrink or eliminate spot market sales
DEFF Research Database (Denmark)
Svenstrup, Mikkel
This Ph.D. thesis consists of four self-contained essays on valuation of interest rate derivatives. In particular derivatives related to management of interest rate risk care are considered.......This Ph.D. thesis consists of four self-contained essays on valuation of interest rate derivatives. In particular derivatives related to management of interest rate risk care are considered....
Arrhenius Rate: constant volume burn
Energy Technology Data Exchange (ETDEWEB)
Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
2017-12-06
A constant volume burn occurs for an idealized initial state in which a large volume of reactants at rest is suddenly raised to a high temperature and begins to burn. Due to the uniform spatial state, there is no fluid motion and no heat conduction. This reduces the time evolu tion to an ODE for the reaction progress variable. With an Arrhenius reaction rate, two characteristics of thermal ignition are illustrated: induction time and thermal runaway. The Frank-Kamenetskii approximation then leads to a simple expression for the adiabatic induction time. For a first order reaction, the analytic solution is derived and used to illustrate the effect of varying the activation temperature; in particular, on the induction time. In general, the ODE can be solved numerically. This is used to illustrate the effect of varying the reaction order. We note that for a first order reaction, the time evolution of the reaction progress variable has an exponential tail. In contrast, for a reaction order less than one, the reaction completes in a nite time. The reaction order also affects the induction time.
Determination of sedimentation rates and absorption coefficient of ...
African Journals Online (AJOL)
2+ has a higher sedimentation rate of 5.10x10-2 s-1 while Ni2+ has the lowest sedimentation rates of 1.10 x10-3. The rate of sedimentation of the metal carbonates decreased in the order: Zn2+ > Cd2+ > Cu2+ > Co2+ > Ni2+. The order ...
Measuring heart rate with optical sensor
Barachi, M. (Mitra)
2014-01-01
The problem addressed in this report is to verify the possibility of using an optical sensor in the SaxShirt in order to extract the heart rate. There are specifically three questions that we try to address. 1) How is it possible to extract heart rate (BPM) from the optical sensor? 2) Is it
75 FR 27375 - Postal Rate Case Management
2010-05-14
... POSTAL REGULATORY COMMISSION [Docket No. PI2010-3; Order No. 456] Postal Rate Case Management AGENCY: Postal Regulatory Commission. ACTION: Notice. SUMMARY: The Commission is seeking comments relevant to management of an anticipated exigent postal rate case. It has scheduled a technical conference...
[Resonance hypothesis of heart rate variability origin].
Sheĭkh-Zade, Iu R; Mukhambetaliev, G Kh; Cherednik, I L
2009-09-01
A hypothesis is advanced of the heart rate variability being subjected to beat-to-beat regulation of cardiac cycle duration in order to ensure the resonance interaction between respiratory and own fluctuation of the arterial system volume for minimization of power expenses of cardiorespiratory system. Myogenic, parasympathetic and sympathetic machanisms of heart rate variability are described.
Bowen, Brent D.; Headley, Dean E.
1996-01-01
The Airline Quality Rating (AQR) was developed and first announced in early 1991 as an objective method of comparing airline performance on combined multiple factors important to consumers. Development history and calculation details for the AQR rating system are detailed in The Airline Quality Rating issued in April, 1991, by the National Institute for Aviation Research at Wichita State University. This current report, Airline Quality Rating 1996, contains monthly Airline Quality Rating scor...
Directory of Open Access Journals (Sweden)
Ahmadishoar Javad
2017-01-01
Full Text Available In this study modified montmorillonite was used as an adsorbent for the removal of two selected disperse dyes i.e., Disperse Blue 56 (DB and Disperse Red 135 (DR from dye dispersions. The adsorption equilibrium data of dyes adsorption were investigated by using Nernst, Freundlich and Langmuir isotherm models. The adsorption kinetics was analyzed by using different models including pseudo-first-order, pseudo-second-order, Elovich and Intraparticle diffusion model. The Freundlich isotherm was found to be the most appropriate model for describing the sorption of the dyes on modified nanoclay. The best fit to the experimental results was obtained by using the pseudo-second-order kinetic equation, which satisfactorily described the process of dye adsorption. Although different kinetic models may control the rate of the adsorption process, the results indicated that the main rate limiting step was the intraparticle diffusion. The results showed that the proposed modified montmorillonite could be used as an effective adsorbent for the removal of disperse dyes even from highly concentrated dispersions.
Kinetic Study of Zn2+ and Cd2+ Ions Sorption by Ceric Oxide Powder
International Nuclear Information System (INIS)
Hassan, H.S.; Abd El-Rahman, K.M.; El Sayed, A.A.
2008-01-01
Ceric Oxide powder was chemically synthesized and characterized using infrared spectra and x-ray diffraction. The sorptive removal of Zinc and Cadmium ions from aqueous waste solution using synthetic ceric oxide powder was investigated using batch technique. Experiments were carried out as a function of ph, particle size, solute concentration and temperature. The uptake of zinc was found to be greater than that of cadmium. A comparison of kinetic models applied to the sorption process of each ion was evaluated for the pseudo first order, the pseudo second order, and homogeneous particle diffusion kinetic models, respectively. The results showed that both the pseudo second order and the homogeneous particle diffusion model (HPDM) were found to best correlate the experimental rate data. The numerical values of the rate constants and particle diffusion coefficients were determined from the graphical representation of the proposed models. Activation energy (Ε a ) and entropy (δ S * ) of activation for each sorption process were also calculated from the linearized form of Arrhenius equation
Directory of Open Access Journals (Sweden)
Luciano Vitali
2006-06-01
Full Text Available The aim of this study was to impregnate the chelating agent 3,3-bis-N,N,bis-(carboxymethylaminomethyl-o-cresolsulfonephthalein in chitosan and to investigate the adsorption of Cu(II ions. The chemical modification was confirmed by FTIR spectrometry, thermogravimetric analysis (TGA and energy dispersive x-ray spectroscopy (EDX. The adsorption studies were carried out with Cu(II ions in a batch process and were shown to be dependent on pH. The adsorption kinetics was tested using three models: pseudo first-order, pseudo second order and intraparticle diffusion. The experimental kinetics data were best fitted with the pseudo second-order model (R² = 0.999, which provided a rate constant, k2, of 1.21 x 10-3 g mg-1 min-1. The adsorption rate depended on the concentration of Cu(II ions on the adsorbent surface and on the quantity of Cu(II ions adsorbed at equilibrium. The Langmuir isotherm model provided the best fit for the equilibrium data in the concentration range investigated, with the maximum adsorption capacity being 81.0 mg of Cu(II per gram of adsorbent, as obtained from the linear equation of the isotherm. Desorption tests revealed that around 90% of the adsorbed metal was removed, using EDTA solution as the eluent. This result suggests that the polymeric matrix can be reused.
Directory of Open Access Journals (Sweden)
Özçimen Didem
2016-01-01
Full Text Available In this study, adsorbents were produced from sewage sludge via chemical and thermal activation processes. Experiments were carried out in a tubular furnace at the heating rate of 20˚C min-1 and temperature of 550 ˚C with a nitrogen flow rate of 400 mL min-1 for 1 h. Dye adsorption experiments were performed with Remazol Brilliant Blue R for its several concentrations under batch equilibrium conditions by comparing sewage sludge based adsorbents with raw material and a commercial activated carbon. Maximum adsorption capacities of carbonized sewage sludge (CSWS and activated sewage sludge (ASWS were found as 7.413 mg g-1 and 9.376 mg g-1 for 100 mg L-1 dye solution, whereas commercial activated carbon had a capacity of 11.561 mg g-1. Freundlich and Langmuir isotherms were used to explain the adsorption mechanism together with pseudo-first-order and pseudo-second-order kinetic models. Langmuir isotherm, which had adsorption capacities of 34.60 mg g-1 (CSWS and 72.99 mg g-1 (ASWS, provided better fit to the equilibrium data than that of Freundlich isotherm. Pseudo second-order, model which had adsorption capacities of 7.451 mg g-1 (CSWS and 9.319 mg g-1 (ASWS, was very favorable to explain the adsorption kinetics of the dye with high regression coefficients.
Directory of Open Access Journals (Sweden)
Manal El-Sadaawy
2014-06-01
Full Text Available The present study investigates the possibility of using low cost agriculture waste as doum-palm seed coat for the removal of nickel ions from aqueous solutions. Two activated carbons had been prepared from raw doum-palm seed coat (DACI and DACII; as well, the raw material was used as an adsorbent (RD. Batch adsorption experiments were performed as a function of pH of solution, initial nickel ions concentration, dose of adsorbent and contact time. Adsorption data were modeled using Langmuir, Freundlich, Temkin and D–R Models. Different error analysis conforms that the isotherm data followed Freundlich models for all adsorbents. Adsorption kinetic data were tested using pseudo-first order, pseudo-second order and Elovich model. Adsorption mechanism was investigated using the intra-particle diffusion model. Diffusion coefficients were calculated using the film and intraparticle diffusion models. Kinetic studies showed that the adsorption of Ni2+ ions onto RD, DACI and DACII followed pseudo-second order kinetic model, and indicates that the intra-particle diffusion controls the rate of adsorption but it is not the rate limiting step.
Directory of Open Access Journals (Sweden)
Mahboobeh Dehvari
2016-01-01
Full Text Available Aims: The aim of this study was the evaluation of adsorption kinetics and equilibrium of reactive blue 19 dyes from textile synthetic wastewater by pomegranate seed powder. Materials and Methods: This study is an experimental research, which was performed in laboratory scale. In this study, the parameters such as adsorbent dose, pH and retention time, initial concentration of dye and agitation rate have been investigated. After washing and boiling of pomegranate seeds for 2 h, they dried, milled and finally pulverized by standard ASTM sieves (40-100 mesh. Maximum adsorption wave length (λmax by spectrophotometer ultra violet/visible (model SP-3000 Plus 592 nm was determined. The Langmuir, Freundlich and Temkin isotherm models and the pseudo-first-order and pseudo-second-order kinetic models were analyzed. Results: According to results, the removal efficiency with adsorbent dose, retention time and agitation rate has a direct relation. Maximum adsorption occurred in the first 60 min. The removal efficiency with initial concentration of dye and pH of solution has indirect relation. The Freundlich isotherm fits the experimental data better than the other isotherms. It was recognized that the adsorption followed by pseudo-second-order model (R2 > 0.99. Conclusion: Based on the results, pomegranate seeds as a new natural sorbent can be used in removal of dye and other environmental pollutants with desirable absorption capacity.
Kinetic study of Cs+ and Eu3+ ions sorption by zirconium oxide powder
International Nuclear Information System (INIS)
Hanafi, H.A.; Hassan, H.S.; Hamed, M.M.
2009-01-01
Full text: Zirconium oxide powder was chemically synthesized by sol-gel method and characterized using infrared spectra and x-ray diffraction. The sorptive removal of cesium and europium ions from aqueous waste solution using synthetic zirconium oxide powder was investigated using batch technique. Experiments were carried out as a function of pH, time and temperature. The uptake of europium was found to be greater than that of cesium. A comparison of kinetic models applied to the sorption process of each ion was evaluated for the pseudo first order, the pseudo second order, and homogeneous particle diffusion kinetic models, respectively. The results showed that both the pseudo second order and the homogeneous particle diffusion models (HPDM) were found to best correlate the experimental rate data. The numerical values of the rate constants and particle diffusion coefficients were determined from the graphical representation of the proposed models. Activation energy (Ea) and entropy (Δ S*) of activation for each sorption process were also calculated from the linearized form of Arrhenius equation. (author)
Reaction rate of propene pyrolysis.
Han, Peipei; Su, Kehe; Liu, Yan; Wang, Yanli; Wang, Xin; Zeng, Qingfeng; Cheng, Laifei; Zhang, Litong
2011-10-01
The reaction rate of propene pyrolysis was investigated based on the elementary reactions proposed in Qu et al., J Comput Chem 2009, 31, 1421. The overall reaction rate was developed with the steady-state approximation and the rate constants of the elementary reactions were determined with the variational transition state theory. For the elementary reaction having transition state, the vibrational frequencies of the selected points along the minimum energy path were calculated with density functional theory at B3PW91/6-311G(d,p) level and the energies were improved with the accurate model chemistry method G3(MP2). For the elementary reaction without transition state, the frequencies were calculated with CASSCF/6-311G(d,p) and the energies were refined with the multireference configuration interaction method MRCISD/6-311G(d,p). The rate constants were evaluated within 200-2000 K and the fitted three-parameter expressions were obtained. The results are consistent with those in the literatures in most cases. For the overall rate, it was found that the logarithm of the rate and the reciprocal temperature have excellent linear relationship above 400 K, predicting that the rate follows a typical first-order law at high temperatures of 800-2000 K, which is also consistent with the experiments. The apparent activation energy in 800-2000 K is 317.3 kJ/mol from the potential energy surface of zero Kelvin. This value is comparable with the energy barriers, 365.4 and 403.7 kJ/mol, of the rate control steps. However, the apparent activation energy, 215.7 kJ/mol, developed with the Gibbs free energy surface at 1200 K is consistent with the most recent experimental result 201.9 ± 0.6 kJ/mol. Copyright © 2011 Wiley Periodicals, Inc.
Yazer, Mark H; Triulzi, Darrell J; Reddy, Vivek; Waters, Jonathan H
2013-12-01
We investigated the effect of implementing adaptive plasma ordering criteria in the computerized physician order entry (CPOE) system, with alerts that were automatically generated if the recipient's antecedent international normalized ratio (INR) did not meet the institutional criteria. In a regional health care system consisting of 11 hospitals using a common CPOE, data on the number of plasma orders and alerts that were generated were collected over a 4-month period before prescribers were required to select an indication for plasma. When adaptive ordering was implemented prescribers had to choose from prepopulated indications for plasma: INR of 1.6 or greater with bleeding, INR of 1.6 or greater before an invasive procedure, therapeutic exchange, massive transfusion, and other. Regardless of the antecedent INR the alert did not trigger if massive transfusion or plasmapheresis was selected. Information on prescribers and recipients was collected during this 5-month period. In the 4-month period before the adaptive alerts were implemented, 42.9% of the plasma orders generated an alert; in the 5-month period thereafter the alert rate was significantly lower at 27.9% (p plasma orders were for periprocedure or bleeding patients whose antecedent INR was less than 1.6. There were significant differences in prescriber specialties among those who ordered plasma using the other indication compared to all plasma orders. Electronic interventions improve compliance with plasma guidelines but as implemented are not sufficient to completely curtail non-evidence-based ordering. © 2013 American Association of Blood Banks.
High-order finite volume advection
Shaw, James
2018-01-01
The cubicFit advection scheme is limited to second-order convergence because it uses a polynomial reconstruction fitted to point values at cell centres. The highOrderFit advection scheme achieves higher than second order by calculating high-order moments over the mesh geometry.
10 CFR 218.11 - Supply orders.
2010-01-01
... 10 Energy 3 2010-01-01 2010-01-01 false Supply orders. 218.11 Section 218.11 Energy DEPARTMENT OF ENERGY OIL STANDBY MANDATORY INTERNATIONAL OIL ALLOCATION Supply Orders § 218.11 Supply orders. (a) A supply order shall require that the firm to which it is issued take actions specified therein relating to...
Li, Xin; Wang, Jun; Zhang, Xiaojian; Chen, Chao
2015-06-01
Powdered activated carbon (PAC) adsorption of two fishy odorants, trans,trans-2,4-heptadienal (HDE) and trans,trans-2,4-decadienal (DDE), was investigated. Both the pseudo first-order and the pseudo second-order kinetic models well described the kinetics curves, and DDE was more readily removed by PAC. In isotherm tests, both Freundlich and Modified Freundlich isotherms fitted the experimental data well. PAC exhibited a higher adsorption capacity for DDE than for HDE, which could be ascribed to the difference in their hydrophobicity. The calculated thermodynamic parameters (ΔG0, ΔH0, and ΔS0) indicated an exothermic and spontaneous adsorption process. PAC dosage, pH, and natural organic matter (NOM) presence were found to influence the adsorption process. With increasing PAC dosage, the pseudo first-order and pseudo second-order rate constants both increased. The value of pH had little influence on HDE or DDE molecules but altered the surface charge of PAC, and the maximum adsorption capacity occurred at pH9. The presence of NOM, especially the fraction with molecular weight less than 1k Dalton, hindered the adsorption. The study showed that preloaded NOM impaired the adsorption capacity of HDE or DDE more severely than simultaneously fed NOM did. Copyright © 2015. Published by Elsevier B.V.
Achak, M; Hafidi, A; Ouazzani, N; Sayadi, S; Mandi, L
2009-07-15
The aim of this work is to determine the potential of application of banana peel as a biosorbent for removing phenolic compounds from olive mill wastewaters. The effect of adsorbent dosage, pH and contact time were investigated. The results showed that the increase in the banana peel dosage from 10 to 30 g/L significantly increased the phenolic compounds adsorption rates from 60 to 88%. Increase in the pH to above neutrality resulted in the increase in the phenolic compounds adsorption capacity. The adsorption process was fast, and it reached equilibrium in 3-h contact time. The Freundlich and Langmuir adsorption models were used for mathematical description of the adsorption equilibrium and it was found that experimental data fitted very well to both Freundlich and Langmuir models. Batch adsorption models, based on the assumption of the pseudo-first-order, pseudo-second-order and intraparticle diffusion mechanism, showed that kinetic data follow closely the pseudo-second-order than the pseudo-first-order and intraparticle diffusion. Desorption studies showed that low pH value was efficient for desorption of phenolic compounds. These results indicate clearly the efficiency of banana peel as a low-cost solution for olive mill wastewaters treatment and give some preliminary elements for the comprehension of the interactions between banana peel as a bioadsorbent and the very polluting compounds from the olive oil industry.
Biosorption kinetics of Cd (II, Cr (III and Pb (II in aqueous solutions by olive stone
Directory of Open Access Journals (Sweden)
M. Calero
2009-06-01
Full Text Available A by-product from olive oil production, olive stone, was investigated for the removal of Cd (II, Cr (III and Pb (II from aqueous solutions. The kinetics of biosorption are studied, analyzing the effect of the initial concentration of metal and temperature. Pseudo-first-order, pseudo-second-order, Elovich and intraparticle diffusion models have been used to represent the kinetics of the process and obtain the main kinetic parameters. The results show that the pseudo-second order model is the one that best describes the biosorption of the three metal ions for all the range of experimental conditions investigated. For the three metal ions, the maximum biosoption capacity and the initial biosorption rate increase when the initial metal concentration rises. However, the kinetic constant decreases when the initial metal concentration increases. The temperature effect on biosorption capacity for Cd (II and Cr (III is less significant; however, for Pb (II the effect of temperature is more important, especially when temperature rises from 25 to 40ºC. The biosorption capacity at mmol/g of olive stone changes in the following order: Cr>Cd>Pb. Thus, for an initial concentration of 220 mg/ℓ, a maximum sorption capacity of 0.079 mmol/g for Cr (III, 0.065 mmol/g for Cd (II and 0.028 mmol/g for Pb (II has been obtained.
76 FR 50703 - Walnuts Grown in California; Increased Assessment Rate
2011-08-16
... under Executive Order 12988, Civil Justice Reform. Under the marketing order now in effect, California... marketing year. The proposed assessment rate would continue in effect indefinitely unless modified..., August 16, 2011 / Proposed Rules#0;#0; [[Page 50703
75 FR 55255 - Egg Research and Promotion Order; Referendum Procedures
2010-09-10
...-0116] Egg Research and Promotion Order; Referendum Procedures AGENCY: Agricultural Marketing Service... Marketing Service (AMS) will use in conducting a referendum to determine whether egg producers favor increasing the assessment they pay to the American Egg Board (AEB) from a rate of 10 cents per 30- dozen case...
7 CFR 1030.85 - Assessment for order administration.
2010-01-01
... handler shall pay to the market administrator its pro rata share of the expense of administration of the order at a rate specified by the market administrator that is no more than 8 cents per hundredweight... distributing plant that exceeds the skim milk and butterfat subtracted pursuant to § 1000.76(a)(1)(i) and (ii...
Earliest Recollections and Birth Order: Two Adlerian Exercises.
Parrott, Les
1992-01-01
Presents two exercises designed to demonstrate the influence of two Adlerian principles on personality. Includes exercises dealing with birth order and earliest recollection. Concludes that the exercises actively demonstrate major concepts for counseling courses in Adlerian psychotherapy. Reports that students rated both exercises highly, with…
5 CFR 302.304 - Order of consideration.
2010-01-01
... her right of appeal to the Merit Systems Protection Board. (b) Consideration of other candidates... eligible ratings for professional and scientific positions at the GS-9 level and above, or equivalent, in... of the following orders: (i) By preference status. Under this method, preference eligibles having a...
A REVIEW OF ORDER PICKING IMPROVEMENT METHODS
Directory of Open Access Journals (Sweden)
Johan Oscar Ong
2014-09-01
Full Text Available As a crucial and one of the most important parts of warehousing, order picking often raises discussion between warehousing professionals, resulting in various studies aiming to analyze how order picking activity can be improved from various perspective. This paper reviews various past researches on order picking improvement, and the various methods those studies analyzed or developed. This literature review is based on twenty research articles on order picking improvement viewed from four different perspectives: Automation (specifically, stock-to-picker system, storage assignment policy, order batching, and order picking sequencing. By reviewing these studies, we try to identify the most prevalent order picking improvement approach to order picking improvement. Keywords: warehousing; stock-to-picker; storage assignment; order batching; order picking sequencing; improvement
Nonlinear dynamics of fractional order Duffing system
International Nuclear Information System (INIS)
Li, Zengshan; Chen, Diyi; Zhu, Jianwei; Liu, Yongjian
2015-01-01
In this paper, we analyze the nonlinear dynamics of fractional order Duffing system. First, we present the fractional order Duffing system and the numerical algorithm. Second, nonlinear dynamic behaviors of Duffing system with a fixed fractional order is studied by using bifurcation diagrams, phase portraits, Poincare maps and time domain waveforms. The fractional order Duffing system shows some interesting dynamical behaviors. Third, a series of Duffing systems with different fractional orders are analyzed by using bifurcation diagrams. The impacts of fractional orders on the tendency of dynamical motion, the periodic windows in chaos, the bifurcation points and the distance between the first and the last bifurcation points are respectively studied, in which some basic laws are discovered and summarized. This paper reflects that the integer order system and the fractional order one have close relationship and an integer order system is a special case of fractional order ones.
Fractional Order Element Based Impedance Matching
Radwan, Ahmed Gomaa
2014-06-24
Disclosed are various embodiments of methods and systems related to fractional order element based impedance matching. In one embodiment, a method includes aligning a traditional Smith chart (|.alpha.|=1) with a fractional order Smith chart (|.alpha.|.noteq.1). A load impedance is located on the traditional Smith chart and projected onto the fractional order Smith chart. A fractional order matching element is determined by transitioning along a matching circle of the fractional order Smith chart based at least in part upon characteristic line impedance. In another embodiment, a system includes a fractional order impedance matching application executed in a computing device. The fractional order impedance matching application includes logic that obtains a first set of Smith chart coordinates at a first order, determines a second set of Smith chart coordinates at a second order, and determines a fractional order matching element from the second set of Smith chart coordinates.
2015-07-01
defined as [6,7] E = 1 2 (F ETF E − 1), EIJ = 1 2 (F EkIF E kJ − δIJ). (3) Also considered here are theories incorporating the elastic Eulerian material...lnU E = 1 2 ln(F ETF E) = 1 2 ln CE, eIJ = 1 2 ln(F ETF E)IJ . (5) Complete presentations of thermodynamic theories can be found in [12–16] and are
Pauls-Worm, K.G.J.; Hendrix, E.M.T.; Alcoba, A.G.; Haijema, R.
2016-01-01
We study the practical decision problem of fresh food production with a long production lead time to decide every period (e.g. week) how many items to produce. When a batch is ready for use, its items have a fixed shelf life, after which the items become waste in the sense that they cannot be sold
76 FR 28767 - Desert Southwest Customer Service Region-Rate Order No. WAPA-152
2011-05-18
... DEPARTMENT OF ENERGY Western Area Power Administration Desert Southwest Customer Service Region..., Desert Southwest Customer Service Region, Western Area Power Administration, P.O. Box 6457, Phoenix, AZ... Customer Service Region, Western Area Power Administration, P.O. Box 6457, Phoenix, AZ 85005-6457, (602...
76 FR 55139 - Order Making Fiscal Year 2012 Annual Adjustments to Registration Fee Rates
2011-09-06
... U.S.C. 77f(b). \\2\\ 15 U.S.C. 78m(e). \\3\\ 15 U.S.C. 78n(g). The Investor and Capital Markets Fee... model [Delta] t = [alpha] + [beta]e t-1 + e t , where e t denotes the forecast error for month t. The... [Delta] t . The forecast error is expressed as e t = [Delta] t - [alpha] - [beta]e t-1 . The model can be...
77 FR 55240 - Order Making Fiscal Year 2013 Annual Adjustments to Registration Fee Rates
2012-09-07
... U.S.C. 77f(b). \\2\\ 15 U.S.C. 78m(e). \\3\\ 15 U.S.C. 78n(g). The Investor and Capital Markets Fee... model [Delta] t = [alpha] + [beta]e t - 1 + e t , where e t denotes the forecast error for month t. The... [Delta] t . The forecast error is expressed as e t = [Delta] t - [alpha] - [beta]e t - 1 . The model can...
78 FR 35022 - Parker-Davis Project-Rate Order No. WAPA-162
2013-06-11
...), a power marketing administration within the Department of Energy (DOE), is proposing to extend the... transmission service, firm transmission service of Salt Lake City Area/Integrated Projects power, and non-firm...
78 FR 25515 - Order Making Fiscal Year 2013 Annual Adjustments to Transaction Fee Rates
2013-05-01
... collected under Section 31(d) of the Exchange Act for all of fiscal year 2013 \\8\\ from an amount equal to... Act of 1934 (``Exchange Act'') requires each national securities exchange and national securities association to pay transaction fees to the Commission.\\1\\ Specifically, Section 31(b) requires each national...
2010-11-29
...) (i.e., disclosed the type of conflict of interest in Exhibit 6 to Form NRSRO in accordance with... specifically prohibits seven types of conflicts of interest. Consequently, an NRSRO is prohibited from issuing...). II. Background Rule 17g-5 identifies, in paragraphs (b) and (c) of the rule, a series of conflicts of...
Next-to-next-leading order correction to 3-jet rate and event-shape ...
Indian Academy of Sciences (India)
portunity to test QCD by measuring the energy dependence of different ... event shape data was not satisfactory largely due to the scale uncertainty of the pertur- .... )3 d ¯C dy. + O. ( α4 s. ) . (5). Here the event-shape distribution is normalized to the ..... [1] A Gehrmann-De Ridder, T Gehrmann, E W N Glover and G Heinrich, J.
Regnery, J.; Wing, A.D.; Alidina, M.; Drewes, J.E.
2015-01-01
This study developed relationships between the attenuation of emerging trace organic chemicals (TOrC) during managed aquifer recharge (MAR) as a function of retention time, system characteristics, and operating conditions using controlled laboratory
Charting an Alternate Pathway to Reaction Orders and Rate Laws in Introductory Chemistry Courses
Rushton, Gregory T.; Criswell, Brett A.; McAllister, Nicole D.; Polizzi, Samuel J.; Moore, Lamesha A.; Pierre, Michelle S.
2014-01-01
Reaction kinetics is an axiomatic topic in chemistry that is often addressed as early as the high school course and serves as the foundation for more sophisticated conversations in college-level organic, physical, and biological chemistry courses. Despite the fundamental nature of reaction kinetics, students can struggle with transforming their…
78 FR 59775 - Blueberry Promotion, Research and Information Order; Assessment Rate Increase
2013-09-30
...;Prices of new books are listed in the first FEDERAL REGISTER issue of each #0;week. #0; #0; #0; #0;#0... per capita consumption would equate to a level of 50 ounces per person by 2015. \\4\\ Kaiser, Henry M... of supply is a measure used in economics to show the responsiveness, or elasticity, of the quantity...
75 FR 6380 - Provo River Project Rate Order No. WAPA-149
2010-02-09
... kilowatts. The PRP power is marketed according to a marketing plan that was approved and published in the Federal Register on November 21, 1994. This marketing plan allows Western to market the output of the PRP to customers of Utah Municipal Power Agency, Utah Associated Municipal Power Systems, and Heber Light...
77 FR 13663 - Order Making Fiscal Year 2012 Mid-Year Adjustments to Transaction Fee Rates
2012-03-07
... on transactions in the six months before the effective date of the mid-year adjustment. The... series {[Delta] 1 , [Delta] 2 , * * *, [Delta] 120 {time} . These are given by [mu] = 0.007 and [sigma...] + [sigma]\\2\\/2), or on average ADS t = 1.015 x ADS t-1 . 6. For February 2012, this gives a forecast ADS of...
75 FR 5315 - Boulder Canyon Project-Rate Order No. WAPA-150
2010-02-02
..., and uprating program payments. The total costs are offset by the projected revenue from water sales, visitor center, water pump energy sales, facilities use charges, regulation, reactive supply and voltage...
77 FR 3818 - Order Making Fiscal Year 2012 Annual Adjustments to Transaction Fee Rates
2012-01-25
... the business day following the date of the appropriation is equal to or subsequent to the date the... association to pay transaction fees to the Commission.\\1\\ Specifically, Section 31(b) requires each national securities exchange to pay to the Commission fees based on the aggregate dollar amount of sales of certain...
78 FR 29258 - Blueberry Promotion, Research and Information Order; Assessment Rate Increase
2013-05-20
... Commission and the Food and Drug Administration requirements for the advertising of food. The USHBC uses its... effectiveness of the USHBC's promotion program. The studies were conducted by Dr. Harry M. Kaiser at Cornell... domestic promotion activities on blueberry disappearance (a measure of demand), an econometric demand model...
Rate Adaptive OFDMA Communication Systems
International Nuclear Information System (INIS)
Abdelhakim, M.M.M.
2009-01-01
Due to the varying nature of the wireless channels, adapting the transmission parameters, such as code rate, modulation order and power, in response to the channel variations provides a significant improvement in the system performance. In the OFDM systems, Per-Frame adaptation (PFA) can be employed where the transmission variables are fixed over a given frame and may change from one frame to the other. Subband (tile) loading offers more degrees of adaptation such that each group of carriers (subband) uses the same transmission parameters and different subbands may use different parameters. Changing the code rate for each tile in the same frame, results in transmitting multiple codewords (MCWs) for a single frame. In this thesis a scheme is proposed for adaptively changing the code rate of coded OFDMA systems via changing the puncturing rate within a single codeword (SCW). In the proposed structure, the data is encoded with the lowest available code rate then it is divided among the different tiles where it is punctured adaptively based on some measure of the channel quality for each tile. The proposed scheme is compared against using multiple codewords (MCWs) where the different code rates for the tiles are obtained using separate encoding processes. For bit interleaved coded modulation architecture two novel interleaving methods are proposed, namely the puncturing dependant interleaver (PDI) and interleaved puncturing (IntP), which provide larger interleaving depth. In the PDI method the coded bits with the same rate over different tiles are grouped for interleaving. In IntP structure the interleaving is performed prior to puncturing. The performance of the adaptive puncturing technique is investigated under constant bit rate constraint and variable bit rate. Two different adaptive modulation and coding (AMC) selection methods are examined for variable bit rate adaptive system. The first is a recursive scheme that operates directly on the SNR whereas the second
Labor Force Participation Rate
City and County of Durham, North Carolina — This thematic map presents the labor force participation rate of working-age people in the United States in 2010. The 2010 Labor Force Participation Rate shows the...
U.S. Department of Health & Human Services — As of September 1, 2011, the Affordable Care Act and rate review regulation require review of rate increases of 10 percent or more. A non-grandfathered health plan...
Coopersmith, Michael; Gambardella, Pascal J.
2016-01-01
This article is an extension of the work of one of us (Coopersmith, 2011) in deriving the relationship between certain interest rates and the inflation rate of a two component economic system. We use the well-known Fisher relation between the difference of the nominal interest rate and its inflation adjusted value to eliminate the inflation rate and obtain a delay differential equation. We provide computer simulated solutions for this equation over regimes of interest. This paper could be of ...
Marina Pepic
2014-01-01
Interest rates changes have a huge impact on the business performance. Therefore, it is of great importance for the market participants to identify and adequately manage this risk. Financial derivatives are a relatively simple way of protection from adverse changes in interest rates. Interest rate swaps are particularly popular because they reduce interest rate risk to a minimum with a relatively low initial cost and without great risk, but also because of the fact that there are many modific...
Understanding Interest Rate Volatility
Volker, Desi
2016-01-01
This thesis is the result of my Ph.D. studies at the Department of Finance of the Copenhagen Business School. It consists of three essays covering topics related to the term structure of interest rates, monetary policy and interest rate volatility. The rst essay, \\Monetary Policy Uncertainty and Interest Rates", examines the role of monetary policy uncertainty on the term structure of interest rates. The second essay, \\A Regime-Switching A ne Term Structure Model with Stochast...
Bowen, Brent D.; Headley, Dean E.
2003-01-01
The Airline Quality Rating (AQR) was developed and first announced in early 1991 as an objective method of comparing airline quality on combined multiple performance criteria. This current report, the Airline Quality Rating 2003, reflects monthly Airline Quality Rating scores for 2002. AQR scores for the calendar year 2002 are based on 15 elements that focus on airline performance areas important to air travel consumers. The Airline Quality Rating 2003 is a summary of month-by-month qualit...
Bowen, Brent D.; Headley, Dean E.
2001-01-01
The Airline Quality Rating (AQR) was developed and first announced in early 1991 as an objective method of comparing airline quality on combined multiple performance criteria. This current report, Airline Quality Rating 2001, reflects monthly Airline Quality Rating scores for 2000. AQR scores for the calendar year 2000 are based on 15 elements that focus on airline performance areas important to air travel consumers. The Airline Quality Rating 2001 is a summary of month-by-month quality ra...
Effectiveness of the Community Treatment Order in streamlining psychiatric services.
Awara, Mahmoud A; Jaffar, Khalid; Roberts, Pauline
2013-04-01
The implementation of the Community Treatment Order (CTO) has created controversy surrounding its beneficence. The study aims at examining the effectiveness of the CTO in reducing the rate and duration of revolving door admissions for patients who were made subject to this Order. All patients who were made subject to CTO between November 2008 and August 2009 in South Essex were involved in the study where patients acted as their own control through comparing their pre-CTO, during CTO and post-CTO's admission rate and duration. There was a significant reduction in the rate and duration of admissions in the period during and post-CTO state. The CTO proved to be effective in reducing revolving door admissions and it has a beneficial carryover effect in the post-CTO state.
Thermonuclear reaction rates. III
International Nuclear Information System (INIS)
Harris, M.J.; Fowler, W.A.; Caughlan, G.R.; Zimmerman, B.A.
1983-01-01
Stellar thermonuclear reaction rates are revised and updated, adding a number of new important reaction rates. Several reactions with large negative Q-values are included, and examples of them are discussed. The importance of the decay rates for Mg-26(p,n) exp 26 Al and Al-26(n,p) exp 26 Mg for stellar studies is emphasized. 19 references
Resonant thermonuclear reaction rate
International Nuclear Information System (INIS)
Haubold, H.J.; Mathai, A.M.
1986-01-01
Basic physical principles for the resonant and nonresonant thermonuclear reaction rates are applied to find their standard representations for nuclear astrophysics. Closed-form representations for the resonant reaction rate are derived in terms of Meijer's G-function. Analytic representations of the resonant and nonresonant nuclear reaction rates are compared and the appearance of Meijer's G-function is discussed in physical terms
High-Order Hamilton's Principle and the Hamilton's Principle of High-Order Lagrangian Function
International Nuclear Information System (INIS)
Zhao Hongxia; Ma Shanjun
2008-01-01
In this paper, based on the theorem of the high-order velocity energy, integration and variation principle, the high-order Hamilton's principle of general holonomic systems is given. Then, three-order Lagrangian equations and four-order Lagrangian equations are obtained from the high-order Hamilton's principle. Finally, the Hamilton's principle of high-order Lagrangian function is given.
Welker, Geertruida Annigje
2004-01-01
It is essential for many order-driven manufacturing companies to be able to respond quickly to changing customer demand. In this respect, the ordering process plays a central role, as coordination between demand and production takes places within this process. The ordering process must contribute to
Nelson Camanho; Pragyan Deb; Zijun Liu
2010-01-01
In principle, credit rating agencies are supposed to be impartial observers that bridge the gap between private information of issuers and the information available to the wider pool of investors. However, since the 1970s, rating agencies have relied on an issuer-pay model, creating a conflict of interest the largest source of income for the rating agencies are the fees paid by the issuers the rating agencies are supposed to impartially rate. In this paper, we explore the trade-off between re...
Nasrullah, Asma; Khan, Hizbullah; Khan, Amir Sada; Man, Zakaria; Muhammad, Nawshad; Khan, Muhammad Irfan; Abd El-Salam, Naser M.
2015-01-01
The ash of C. polygonoides (locally called balanza) was collected from Lakki Marwat, Khyber Pakhtunkhwa, Pakistan, and was utilized as biosorbent for methylene blue (MB) removal from aqueous solution. The ash was used as biosorbent without any physical or chemical treatment. The biosorbent was characterized by using various techniques such as Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The particle size and surface area were measured using particle size analyzer and Brunauer-Emmett-Teller equation (BET), respectively. The SEM and BET results expressed that the adsorbent has porous nature. Effects of various conditions such as initial concentration of methylene blue (MB), initial pH, contact time, dosage of biosorbent, and stirring rate were also investigated for the adsorption process. The rate of the adsorption of MB on biomass sample was fast, and equilibrium has been achieved within 1 hour. The kinetics of MB adsorption on biosorbent was studied by pseudo-first- and pseudo-second-order kinetic models and the pseudo-second-order has better mathematical fit with correlation coefficient value (R 2) of 0.999. The study revealed that C. polygonoides ash proved to be an effective, alternative, inexpensive, and environmentally benign biosorbent for MB removal from aqueous solution. PMID:25705714
Directory of Open Access Journals (Sweden)
T. Smitha
2012-01-01
Full Text Available The use of low-cost, locally available, high efficiency and eco-friendly adsorbents has been investigated as an ideal alternative to the current expensive methods of removing dyes from wastewater. This study investigates the potential use of the peel of Cucumis sativa fruit for the removal of crystal violet (CV dye from simulated wastewater. The effects of different system variables, adsorbent dosage, initial dye concentration, pH and contact time were investigated and optimal experimental conditions were ascertained. The results showed that as the amount of the adsorbent increased, the percentage of dye removal increased accordingly. Optimum pH value for dye adsorption was determined as 7.0. The adsorption of crystal violet followed pseudo-second order rate equation and fit well Langmuir and Freundlich equations. The maximum removal of CV was obtained at pH 7 as 92.15% for adsorbent dose of 0.2 g/50 mL and 25 mg L-1 initial dye concentration at room temperature. The maximum adsorption capacity obtained from Langmuir equation was 34.24 mg g-1. Furthermore, adsorption kinetics of (CV was studied and the rate of adsorption was found to conform to pseudo-second order kinetics with a good correlation (R2 > 0.9739. The peel of Cucumis sativa fruit can be attractive options for dye removal from diluted industrial effluents since test reaction made on simulated dyeing wastewater show better removal percentage of (CV.
Energy Technology Data Exchange (ETDEWEB)
Ge, Mingliang; Du, Mingyi; Zheng, Luoyun [Key Laboratory of Polymer Processing Engineering of Ministry of Education, National Engineering Research Center of Novel Equipment for Polymer Processing, School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou 510640 (China); Wang, Bingying; Zhou, Xiangyang [College of Chemistry and Chemical Engineering, Zhongkai University of Agriculture and Engineering, Guangzhou 510225 (China); Jia, Zhixin [College of Material Science and Engineering, South China University of Technology, Guangzhou 510640 (China); Hu, Guoqing [Key Laboratory of Polymer Processing Engineering of Ministry of Education, National Engineering Research Center of Novel Equipment for Polymer Processing, School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou 510640 (China); Jahangir Alam, S.M., E-mail: mejahangir@scut.edu.cn [Key Laboratory of Polymer Processing Engineering of Ministry of Education, National Engineering Research Center of Novel Equipment for Polymer Processing, School of Mechanical & Automotive Engineering, South China University of Technology, Guangzhou 510640 (China)
2017-05-01
Sugarcane bagasse (SCB) was selected as the supporting material for grafting maleic anhydride (MA) to obtain sugarcane-bagasse-grafting-maleic-anhydride (SCB-g-MA), which was used as an adsorbent for the removal of methylene blue (MB) in the dye-containing wastewater. The granular morphology and functional groups of the material were characterized by the scanning electron microscope (SEM), Fourier transforms infrared spectroscopy (FTIR), and solid-state analysis (13C NMR) methods. The effect(s) of the adsorbent dosage, adsorption time, initial concentration of MB, and the pH of solution on the MB adsorption performance of the material have been also investigated. The results showed that the adsorption capacity and removal rate of MB were found to be 82 mg/g and 98%, respectively. It has also showed that the adsorption behavior on the MB could be well described by the pseudo-second-order model integrated with Langmuir model. - Highlights: • Using solid phase grafting method to graft the maleic anhydride (MA) onto the Sugarcane bagasse (SCB) and get the SCB-g-MA. • SEM, FTIR and 13C NMR analysis were used to characterize the grafting of MA on to the SCB by the solid phase grafting method. • The adsorption capacity and removal rate of MB were to be 82 mg/g and 98% respectively, to show an excellent adsorption effect. • Pseudo-second-order model and Langmuir model are better fitted the adsorption kinetics and isotherms in this research.
A high order solver for the unbounded Poisson equation
DEFF Research Database (Denmark)
Hejlesen, Mads Mølholm; Rasmussen, Johannes Tophøj; Chatelain, Philippe
In mesh-free particle methods a high order solution to the unbounded Poisson equation is usually achieved by constructing regularised integration kernels for the Biot-Savart law. Here the singular, point particles are regularised using smoothed particles to obtain an accurate solution with an order...... of convergence consistent with the moments conserved by the applied smoothing function. In the hybrid particle-mesh method of Hockney and Eastwood (HE) the particles are interpolated onto a regular mesh where the unbounded Poisson equation is solved by a discrete non-cyclic convolution of the mesh values...... and the integration kernel. In this work we show an implementation of high order regularised integration kernels in the HE algorithm for the unbounded Poisson equation to formally achieve an arbitrary high order convergence. We further present a quantitative study of the convergence rate to give further insight...
Fractional-Order Control of Pneumatic Position Servosystems
Directory of Open Access Journals (Sweden)
Cao Junyi
2011-01-01
Full Text Available A fractional-order control strategy for pneumatic position servosystem is presented in this paper. The idea of the fractional calculus application to control theory was introduced in many works, and its advantages were proved. However, the realization of fractional-order controllers for pneumatic position servosystems has not been investigated. Based on the relationship between the pressure in cylinder and the rate of mass flow into the cylinder, the dynamic model of pneumatic position servo system is established. The fractional-order controller for pneumatic position servo and its implementation in industrial computer is designed. The experiments with fractional-order controller are carried out under various conditions, which include sine position signal with different frequency and amplitude, step position signal, and variety inertial load. The results show the effectiveness of the proposed scheme and verify their fine control performance for pneumatic position servo system.
Understanding Interest Rate Volatility
DEFF Research Database (Denmark)
Volker, Desi
This thesis is the result of my Ph.D. studies at the Department of Finance of the Copenhagen Business School. It consists of three essays covering topics related to the term structure of interest rates, monetary policy and interest rate volatility. The rst essay, \\Monetary Policy Uncertainty...... and Interest Rates", examines the role of monetary policy uncertainty on the term structure of interest rates. The second essay, \\A Regime-Switching A ne Term Structure Model with Stochastic Volatility" (co-authored with Sebastian Fux), investigates the ability of the class of regime switching models...... with and without stochastic volatility to capture the main stylized features of U.S. interest rates. The third essay, \\Variance Risk Premia in the Interest Rate Swap Market", investigates the time-series and cross-sectional properties of the compensation demanded for holding interest rate variance risk. The essays...
Regularities and irregularities in order flow data
Theissen, Martin; Krause, Sebastian M.; Guhr, Thomas
2017-11-01
We identify and analyze statistical regularities and irregularities in the recent order flow of different NASDAQ stocks, focusing on the positions where orders are placed in the order book. This includes limit orders being placed outside of the spread, inside the spread and (effective) market orders. Based on the pairwise comparison of the order flow of different stocks, we perform a clustering of stocks into groups with similar behavior. This is useful to assess systemic aspects of stock price dynamics. We find that limit order placement inside the spread is strongly determined by the dynamics of the spread size. Most orders, however, arrive outside of the spread. While for some stocks order placement on or next to the quotes is dominating, deeper price levels are more important for other stocks. As market orders are usually adjusted to the quote volume, the impact of market orders depends on the order book structure, which we find to be quite diverse among the analyzed stocks as a result of the way limit order placement takes place.
Two-Step Method for Preparation of NaA-X Zeolite Blend from Fly Ash for Removal of Cesium ions
International Nuclear Information System (INIS)
El-Naggar, M.R.; El-Kamash, A.M.; El-Dessouky, M.I.; Ghonaim, A.K.
2008-01-01
Pure zeolites can be synthesized from silica extracts obtained from fly ash by alkaline leaching. The extraction potential of industrial by-product fly ash was investigated under repeated fusion process conditions. The amount of extracted silica was 131.43 g/kg ash while the amount extracted alumina was limited to 41.72 g/kg ash. The results of zeolite synthesis from the Si-bearing extracts demonstrated that pure zeolites with high cation exchange capacity (4.624 m eq/g) can be produced. The sorption potential of synthesized A-X zeolite blend for the removal of cesium ions has been investigated. The influences of ph, contact time and temperature have been reported. Thermodynamic parameters such as changes in Gibbs free energy (δG degree), enthalpy (δH degree) and entropy (δS degree) were calculated. A comparison of kinetic models applied to the sorption data was evaluated for pseudo-first order, pseudo-second order and homogeneous particle diffusion models. The results showed that both the pseudo-second order and the homogeneous particle diffusion models were found to best correlate the experimental rate data
Shabbir, Mohd; Rather, Luqman Jameel; Shahid-Ul-Islam; Bukhari, Mohd Nadeem; Shahid, Mohd; Ali Khan, Mohd; Mohammad, Faqeer
2016-05-01
In the present study Terminalia chebula was used as an eco-friendly natural colorant for sustainable textile coloration of woolen yarn with primary emphasis on thermodynamic and kinetic adsorption aspects of dyeing processes. Polyphenols and ellagitannins are the main coloring components of the dye extract. Assessment of the effect of pH on dye adsorption showed an increase in adsorption capacity with decreasing pH. Effect of temperature on dye adsorption showed 80 °C as optimum temperature for wool dyeing with T. chebula dye extract. Two kinetic equations, namely pseudo first-order and pseudo second-order equations, were employed to investigate the adsorption rates. Pseudo second-order model provided the best fit (R (2) = 0.9908) to the experimental data. The equilibrium adsorption data were fitted by Freundlich and Langmuir isotherm models. The adsorption behavior accorded well (R (2) = 0.9937) with Langmuir isotherm model. Variety of eco-friendly and sustainable shades were developed in combination with small amount of metallic mordants and assessed in terms of colorimetric (CIEL(∗) a (∗) b (∗) and K/S) properties measured using spectrophotometer under D65 illuminant (10° standard observer). The fastness properties of dyed woolen yarn against light, washing, dry and wet rubbing were also evaluated.
Cadmium removal from aqueous solutions by pumice and nano-pumice
Energy Technology Data Exchange (ETDEWEB)
Khorzughy, Sara Haddadi; Eslamkish, Teymur [Amirkabir University of Technology, Tehran (Iran, Islamic Republic of); Ardejani, Faramarz Doulati [University of Tehran, Tehran (Iran, Islamic Republic of); Heydartaemeh, Mohammad Reza [Shahrood University of Technology, Shahrood (Iran, Islamic Republic of)
2015-01-15
Use of low-cost minerals to eliminate mining and industrial pollutants is the main goal of this study. We investigated the ability of pumice and nano-pumice to remove cadmium from a synthetic aqueous solution. Batch experiments were performed to investigate adsorption characteristic; therefore, the effective factors influencing the adsorption process including solution pH, contact time and initial concentration have been considered. Equilibrium data were attempted by Langmuir and Freundlich isotherm models to realize the interaction between adsorbent and adsorbate. The results show that cadmium adsorption on Pumice follows the Langmuir isotherm model with a R{sup 2} of 0.9996 and shows a homogeneous and mono-layer adsorption. Whereas, cadmium adsorption on nano-Pumice follows a Freundlich model (R{sup 2}=0.9939) and exhibits a multi-layer adsorption. The maximum mono-layer capacity (q{sub max}) of cadmium for pumice and nano-pumice was calculated 26 and 200mg/g, respectively. Two different kinetics models including pseudo first-order and pseudo second-order were studied to evaluate the rate and mechanism of cadmium adsorption by pumice and nano-pumice. The kinetics data indicate that a pseudo second-order model provides the best correlation of the experimental data.
Fluoride sorption using Cynodon dactylon based activated carbon
Directory of Open Access Journals (Sweden)
Alagumuthu G.
2011-01-01
Full Text Available This study deals the application of Cynodon dactylon based thermally activated carbon for fluoride toxicity. The batch adsorption techniques was followed at neutral pH as the functions of contact time, adsorbent dose, adsorbate concentration, temperature and the effect of co-anions. The data indicate that the prepared adsorbent surface sites are heterogeneous in nature and that fits into a heterogeneous site-binding model. The present system followed the Redlich-Peterson isotherm as well as Langmuir adsorption isotherm model. Lagergren pseudo-first-order, pseudo-second-order, intra particle diffusion and Elovich kinetics were modeled to describe the adsorption rate of fluoride and determined as this scheme followed pseudo-second-order kinetics. The calculated enthalpy change, ΔH°, and entropy change, ΔS°, for the adsorption process are +8.725 kJ/mol and +0.033 J/mol K respectively and shows endothermic experience. Instrumental analysis of XRD, FTIR and SEM gives the idea about the fluoride binding ability of adsorbent.
Removal of dieldrin from aqueous solution by a novel triolein-embedded composite adsorbent
International Nuclear Information System (INIS)
Ru Jia; Liu Huijuan; Qu Jiuhui; Wang Aimin; Dai Ruihua
2007-01-01
In this study, a novel triolein-embedded activated carbon composite adsorbent (CA-T) was prepared and applied for the adsorption and removal of dieldrin from aqueous systems. Experiments were carried out to investigate the adsorption behavior of dieldrin on CA-T, including adsorption isotherms, adsorption kinetics, the influence of initial concentration, temperature, shaking speed, pH and the addition of humic acid (HA) on adsorption. The adsorption isotherms accorded with Freundlich equation. Three kinetics models, including pseudo-first-order, pseudo-second-order and intraparticle diffusion models, were used to fit the experimental data. By comparing the correlation coefficients, it was found that both pseudo-second-order and intraparticle diffusion models were used to well describe the adsorption of dieldrin on CA-T. The addition of HA had little effect on dieldrin adsorption by CA-T. Results indicated that CA-T appeared to be a promising adsorbent for removing lipophilic dieldrin in trace amount, which was advantageous over pure granular activated carbon (GAC). The adsorption rate increased with increasing shaking speed, initial concentration and temperature, and remained almost unchanged in the pH range of 4-8. Thermodynamic calculations indicated that the adsorption reaction was spontaneous with a high affinity and the adsorption was an endothermic reaction
Yang, Cai-xia; Lei, Lei; Zhou, Peng-xin; Zhang, Zhe; Lei, Zi-qiang
2015-04-01
Poly (AA co PVP)/PGS (PAPP) composite adsorbent was prepared by radical polymerization from Acrylic acid (AA), Polyvinylpyrrolidone (PVP) and Palygorskite (PGS), using N,N-methylenebisacrylamide (MBA) as cross-linker and potassium persulfate (KPS) as initiator. The PAPP was characterized with Fourier transform infrared (FT-IR), thermogravimetric analysis (TG), scanning electron microscope (SEM) and transmission electron microscopy (TEM). PAPP was used as adsorbent for the removal of methylene blue from aqueous solutions. The influences of pH, adsorption temperature and adsorption time on the adsorption properties of the composite to the dye were also investigated. Meanwhile, the adsorption rate data and adsorption equilibrium date were analyzed based on the pseudo-first-order and pseudo-second-order kinetic model, Langmuir and Freundlich isotherm models, respectively. The results indicating that the kinetic behavior better fit with the pseudo-second-order kinetic model. The maximum equilibrium adsorption capacity (q(m)) is 1815 mg/g at 289 K. The isotherm behavior can be explained by the Langmuir isotherm models. The activation energy was also evaluated for the removal of methylene blue onto PAPP. These results demonstrate that this composite material could be used as a good adsorbent for the removal of cationic dyes from wastewater. Copyright © 2014 Elsevier Inc. All rights reserved.
International Nuclear Information System (INIS)
Dai, Wei; Yu, Huijing; Ma, Na; Yan, Xiaoyang
2015-01-01
A new type of activated carbon, torreya-grandis-skin-based activated carbon (TAC), has been used to remove the harmful dyes (cationic dye crystal violet (CV) and anionic dye naphthol green (NG)) from contaminated water via batch adsorption. The effects of solution pH, adsorption time and temperature were studied. The Langmuir and Freundlich adsorption models were used to describe the equilibrium isotherm and isotherm constant calculation. It was found that the maximum equilibrium adsorption capacities were 292mg/g and 545mg/g for CV and NG, respectively. Adsorption kinetics was verified by pseudo-first-order, pseudo-second-order and intra-particle diffusion kinetic models. Results indicated that the rate of dye adsorption followed pseudo-second-order kinetic model for the initial dye concentration range studied. Temperature-dependent adsorption behavior of CV and NG shows that the adsorption is spontaneous and endothermic, accompanying an entropy increase. This work indicates that TAC could be employed as a low-cost alternative for the removal of the textile dyes from effluents
Structure and properties of cotton fabrics treated with functionalized dialdehyde chitosan.
He, Xuemei; Tao, Ran; Zhou, Tianchi; Wang, Chunxia; Xie, Kongliang
2014-03-15
In this research, modified cotton fabrics were prepared by pad-dry-cure technique from the aldehyde chitosan solution containing 3-aminopropyltriethoxysilane (APTES) and 1,2-ethanediamine (EDA) respectively. The structural characterization of the modified cotton fabrics was performed by attenuated total reflection ATR, scanning electron microscopy (SEM) and thermogravimetry (TG) analysis and physical mechanical properties were measured. The adsorption kinetics of modified cotton fabrics were also investigated by using the pseudo first-order and pseudo second-order kinetic model. The dyeing rate constant k1, k2 and half adsorption time t1/2 were calculated, respectively. The results show that the mechanical properties of different modified cotton fabrics were improved, and the surface color depth values (K/S), UV index UPF and anti-wrinkle properties were better than those of untreated cotton. Dyeing kinetics data at different temperatures indicate that Direct Pink 12B up-take on the modified cotton fabrics fitted to pseudo second-order kinetic model. Copyright © 2014 Elsevier Ltd. All rights reserved.
Farhadi, Sajjad; Aminzadeh, Behnoush; Torabian, Ali; Khatibikamal, Vahid; Alizadeh Fard, Mohammad
2012-06-15
This work makes a comparison between electrocoagulation (EC), photoelectrocoagulation, peroxi-electrocoagulation and peroxi-photoelectrocoagulation processes to investigate the removal of chemical oxygen demand (COD) from pharmaceutical wastewater. The effects of operational parameters such as initial pH, current density, applied voltage, amount of hydrogen peroxide and electrolysis time on COD removal efficiency were investigated and the optimum operating range for each of these operating variables was experimentally determined. In electrocoagulation process, the optimum values of pH and voltage were determined to be 7 and 40 V, respectively. Desired pH and hydrogen peroxide concentration in the Fenton-based processes were found to be 3 and 300 mg/L, respectively. The amounts of COD, pH, electrical conductivity, temperature and total dissolved solids (TDS) were on-line monitored. Results indicated that under the optimum operating range for each process, the COD removal efficiency was in order of peroxi-electrocoagulation > peroxi-photoelectrocoagulation > photoelectrocoagulation>electrocoagulation. Finally, a kinetic study was carried out using the linear pseudo-second-order model and results showed that the pseudo-second-order equation provided the best correlation for the COD removal rate. Copyright © 2012 Elsevier B.V. All rights reserved.
A natural sorbent, Luffa cylindrica for the removal of a model basic dye
International Nuclear Information System (INIS)
Altinisik, Aylin; Guer, Emel; Seki, Yoldas
2010-01-01
In this work, application of Luffa cylindrica in malachite green (MG) removal from aqueous solution was studied in a batch system. The effect of contact time, pH and temperature on removal of malachite green was also investigated. By the time pH was increased from 3 to 5, the amount of sorbed malachite green also increased. Beyond the pH value of 5, the amount of sorbed malachite green remains constant. The fits of equilibrium sorption data to Langmuir, Freundlich and Dubinin-Radushkevich equations were investigated. Langmuir isotherm exhibited best fit with the experimental data. Monolayer sorption capacity increased with the increasing of temperature. Sorption kinetic was evaluated by pseudo-first-order, pseudo-second-order, Elovich rate equations and intraparticle diffusion models. It was inferred that sorption follows pseudo-second-order kinetic model. Thermodynamic parameters for sorption process were also found out. Spontaneous and endothermic nature of sorption was obtained due to negative value of free energy (ΔG o ) and positive value of enthalpy (ΔH o ) changes. FTIR analyses were also conducted to confirm the sorption of malachite green onto L. cylindrica.
Shabbir, Mohd; Rather, Luqman Jameel; Shahid-ul-Islam; Bukhari, Mohd Nadeem; Shahid, Mohd; Ali Khan, Mohd; Mohammad, Faqeer
2016-01-01
In the present study Terminalia chebula was used as an eco-friendly natural colorant for sustainable textile coloration of woolen yarn with primary emphasis on thermodynamic and kinetic adsorption aspects of dyeing processes. Polyphenols and ellagitannins are the main coloring components of the dye extract. Assessment of the effect of pH on dye adsorption showed an increase in adsorption capacity with decreasing pH. Effect of temperature on dye adsorption showed 80 °C as optimum temperature for wool dyeing with T. chebula dye extract. Two kinetic equations, namely pseudo first-order and pseudo second-order equations, were employed to investigate the adsorption rates. Pseudo second-order model provided the best fit (R2 = 0.9908) to the experimental data. The equilibrium adsorption data were fitted by Freundlich and Langmuir isotherm models. The adsorption behavior accorded well (R2 = 0.9937) with Langmuir isotherm model. Variety of eco-friendly and sustainable shades were developed in combination with small amount of metallic mordants and assessed in terms of colorimetric (CIEL∗a∗b∗ and K/S) properties measured using spectrophotometer under D65 illuminant (10° standard observer). The fastness properties of dyed woolen yarn against light, washing, dry and wet rubbing were also evaluated. PMID:27222752
Removal of Basic Red 46 dye from aqueous solution by adsorption onto Moroccan clay
International Nuclear Information System (INIS)
Karim, A. Bennani; Mounir, B.; Hachkar, M.; Bakasse, M.; Yaacoubi, A.
2009-01-01
In this study, Moroccan crude clay of Safi, which was characterized by X-ray diffraction, is used as adsorbent for the investigation of the adsorption kinetics, isotherms and thermodynamic parameters of the Basic Red 46 (BR46) in aqueous solutions at various dye concentrations, adsorbent masses and pH values. The results showed that the adsorption capacity of the dye increased by initial dye concentration and pH values. Two kinetic models (the pseudo-first-order and the pseudo-second-order) were used to calculate the adsorption rate constants. The adsorption kinetics of the basic dye followed pseudo-second-order model. The experimental data isotherms were analyzed using the Langmuir, Freundlich and Dubinin-Radushkevish equations. The monolayer adsorption capacity for BR46 dye is 54 mg/g of crude clay. Nearly 20 min of contact time was found to be sufficient for the dye adsorption to reach equilibrium. Thermodynamical parameters were also evaluated for the dye-adsorbent system and revealed that the adsorption process is exothermic in nature.
A potential low cost adsorbent for the removal of cationic dyes from aqueous solutions
Uddin, Md. Tamez; Rahman, Md. Arifur; Rukanuzzaman, Md.; Islam, Md. Akhtarul
2017-10-01
This study was aimed at using mango leaf powder (MLP) as a potential adsorbent for the removal of methylene blue (MB) from aqueous solutions. Characterization of the adsorbent was carried out with scanning electron microscopy, Fourier transform infrared spectroscopy, and nitrogen adsorption-desorption analysis. The pH at the point of zero charge of the adsorbent was determined by titration method and was found a value to be 5.6 ± 0.2. Batch studies were performed to evaluate the influence of various experimental parameters like initial solution pH, contact time, initial concentration of dye and adsorbent dosage on the removal of MB. An adsorption-desorption study was carried out resulting the mechanism of adsorption was carried out by electrostatic force of attraction. The adsorption equilibrium time required for the adsorption of MB on MLP was almost 2 h and 85 ± 5% of the total amount of dye uptake was found to occur in the first rapid phase (30 min). The Langmuir and Freundlich isotherm models were used for modeling the adsorption equilibrium. The experimental equilibrium data could be well interpreted by Langmuir isotherm with maximum adsorption capacity of 156 mg/g. To state the sorption kinetics, the fits of pseudo-first-order and pseudo-second-order kinetic models were investigated. It was obtained that the adsorption process followed the pseudo-second-order rate kinetics. The above findings suggest that MLP can be effectively used for decontamination of dye containing wastewater.
International Nuclear Information System (INIS)
Gupta, Nishesh K.; Sengupta, Arijit; Rane, Vinayak G.; Kadam, R.M.
2017-01-01
Amide Functionalized multi-walled carbon nanotube (CNT-DHA) was found to enhance the sorption efficiency of trivalent lanthanides and actinides from aqueous acidic solution. Langmuir, Freundlich, Dubinin-Radushkevich (D-R) and Temkin isotherm models were employed to understand the sorption mechanism revealing the predominance of Fruendlich isotherm. The sorption energy evaluated from D-R isotherm revealed the sorption process is physisorption, which was confirmed by the no shift in the IR frequency of amide functionality of carbon nanotube on sorption. The EPR spectra of the Gd"3"+ sorbed on carbon nanotube also showed no perturbation on the local environment of Gd"3"+ on sorption again revealing the physisorption. Analysis of the sorption kinetics through Lagergren's first order kinetics, intra particle diffusion model and pseudo second order kinetics revealed that the sorption kinetics followed pseudo second order kinetics for Am"3"+ and Eu"3"+ with rate constants 4.04E-05mg g"-"1 min"-"1 and 8.27E-05 mg g"-"1 min"-"1 respectively. The radiolytic stability of CNT-DHA was evaluated and found to be satisfactory. EDTA was found to strip the trivalent lanthanides and actinides almost quantitatively. (author)
Zhang, Liang; Loáiciga, Hugo A; Xu, Meng; Du, Chao; Du, Yun
2015-11-10
On-site soils are increasingly used in the treatment and restoration of ecosystems to harmonize with the local landscape and minimize costs. Eight natural soils from diverse ecological zones in the source area of a drinking-water reservoir in central China are used as adsorbents for the uptake of phosphorus from aqueous solutions. The X-ray fluorescence (XRF) spectrometric and BET (Brunauer-Emmett-Teller) tests and the Scanning Electron Microscopy (SEM) and Fourier Transform Infrared (FTIR) spectral analyses are carried out to investigate the soils' chemical properties and their potential changes with adsorbed phosphorous from aqueous solutions. The intra-particle diffusion, pseudo-first-order, and pseudo-second-order kinetic models describe the adsorption kinetic processes. Our results indicate that the adsorption processes of phosphorus in soils occurred in three stages and that the rate-controlling steps are not solely dependent on intra-particle diffusion. A quantitative comparison of two kinetics models based on their linear and non-linear representations, and using the chi-square (χ2) test and the coefficient of determination (r2), indicates that the adsorptive properties of the soils are best described by the non-linear pseudo-second-order kinetic model. The adsorption characteristics of aqueous phosphorous are determined along with the essential kinetic parameters.
International Nuclear Information System (INIS)
El-Kamash, A.M.; El-Masry, E.H.; El-Dessouky, M.I.
2008-01-01
Thermodynamic and kinetic investigations on the removal of Eu 3+ ions from aqueous waste solution using bentonite and sandstone, as local clay minerals, has been done using batch technique. The influences of ph, contact time between liquid and solid phases, initial metal ion concentration, and temperature have been evaluated. Pseudo first-order and pseudo second-order kinetic models were used to analyze the sorption rate data and the results showed that the pseudo second-order model is best correlate the kinetic data. Equilibrium isotherms were determined to assess the maximum sorption capacity of bentonite and sandstone and the equilibrium sorption data were analyzed using Freundlich, Langmuir and Dubinin-Radushkevich (D-R) isotherm models. All tested models fit the data reasonably well in terms of regression coefficients. The maximum sorption capacity of bentonite was found to be greater than that of sandstone and the mean free energy is in all cases in the range corresponding to the ion exchange type of sorption. Sorption studies were also performed at different temperatures to obtain the thermodynamic parameters of the process. The numerical value of δG degree decreases with an increase in temperature, indicating that the sorption reaction is more favorable at higher temperature. The positive values of δH degree correspond to the endothermic nature of the sorption process
International Nuclear Information System (INIS)
Yu Zhihui; Qi Tao; Qu Jingkui; Wang Lina; Chu Jinglong
2009-01-01
Experimental measurements have been made on the batch ion exchange of Ca(II) and Mg(II) from potassium chromate solution using cation exchanger of Amberlite IRC 748 as K + form. The ion exchange behavior of two alkaline-earth metals on the resin, depending on contact time, pH, temperature and resin dosage was studied. The adsorption isotherms were described by means of the Langmuir and Freundlich isotherms. For Ca(II) ion, the Langmuir model represented the adsorption process better than the Freundlich model. The maximum ion exchange capacity was found to be 47.21 mg g -1 for Ca(II) and 27.70 mg g -1 for Mg(II). The kinetic data were tested using Lagergren-first-order and pseudo-second-order kinetic models. Kinetic data correlated well with the pseudo-second-order kinetic model, indicating that the chemical adsorption was the rate-limiting step. Various thermodynamic parameters such as Gibbs free energy (ΔG o ), enthalpy (ΔH o ) and entropy (ΔS o ) were also calculated. These parameters showed that the ion exchange of Ca(II) and Mg(II) from potassium chromate solution was feasible, spontaneous and endothermic process in nature. The activation energy of ion-exchange (E a ) was determined as 12.34 kJ mol -1 for Ca(II) and 9.865 kJ mol -1 for Mg(II) according to the Arrhenius equation.
International Nuclear Information System (INIS)
Solgy, Mostafa; Taghizadeh, Majid; Ghoddocynejad, Davood
2015-01-01
Highlights: • Adsorption of uranium from sulphate solutions by an anion exchange resin. • The effects of pH, contact time and adsorbent dosage were investigated. • The adsorption equilibrium is well described by the Freundlich isotherm model. • The adsorption kinetics can be predicted by the pseudo second-order model. • The adsorption is a physical, spontaneous and endothermic process. - Abstract: In the present study, adsorption of uranium from sulphate solutions was evaluated using Amberlite IRA-402 resin. The variation of adsorption process was investigated in batch sorption mode. The parameters studied were pH, contact time and adsorbent dosage. Langmuir and Freundlich isotherm models were used in order to present a mathematical description of the equilibrium data at three different temperatures (25 °C, 35 °C and 45 °C). The final results confirmed that the equilibrium data tend to follow Freundlich isotherm model. The maximum adsorption capacity of Amberlite IRA-402 for uranium(VI) was evaluated to be 213 mg/g for the Langmuir model at 25 °C. The adsorption of uranium on the mentioned anion exchange resin was found to follow the pseudo-second order kinetic model, indicating that chemical adsorption was the rate limiting-step. The values of thermodynamic parameters proved that adsorption process of uranium onto Amberlite IRA-402 resin could be considered endothermic (ΔH > 0) and spontaneous (ΔG < 0)
International Nuclear Information System (INIS)
Zhou Limin; Wang Yiping; Liu Zhirong; Huang Qunwu
2009-01-01
Magnetic chitosan microspheres were prepared and chemically modified with thiourea (TMCS) for adsorption of metal ions. TMCS obtained were investigated by means of X-ray diffraction (XRD), IR, magnetic properties and thermogravimetric analysis (TGA). The adsorption properties of TMCS toward Hg 2+ , Cu 2+ , and Ni 2+ ions were evaluated. Various factors affecting the uptake behavior such as contact time, temperature, pH and initial concentration of the metal ions were investigated. The kinetics was evaluated utilizing the pseudo-first-order, pseudo-second-order, and the intra-particle diffusion models. The equilibrium data were analyzed using the Langmuir, Freundlich, and Tempkin isotherm models. The adsorption kinetics followed the mechanism of the pseudo-second-order equation for all systems studied, evidencing chemical sorption as the rate-limiting step of adsorption mechanism and not involving a mass transfer in solution. The best interpretation for the equilibrium data was given by Langmuir isotherm, and the maximum adsorption capacities were 625.2, 66.7, and 15.3 mg/g for Hg 2+ , Cu 2+ , and Ni 2+ ions, respectively. TMCS displayed higher adsorption capacity for Hg 2+ in all pH ranges studied. The adsorption capacity of the metal ions decreased with increasing temperature. The metal ion-loaded TMCS with were regenerated with an efficiency of greater than 88% using 0.01-0.1 M ethylendiamine tetraacetic acid (EDTA)
Examples of Entropy-driven Ordering
Indian Academy of Sciences (India)
driven Ordering. Orientational ordering of long objects. Entropy of sliding increases. Freezing in hard-sphere systems. Vibrational entropy increases. Phase separation in hard-sphere binary mixtures with disparate sizes. More room for smaller ...
Algorithm of resonance orders for the objects
Zhang, YongGang; Zhang, JianXue
2018-03-01
In mechanical engineering, the object resonance phenomena often occur when the external incident wave frequency is close to object of the natural frequency. Object resonance phenomena get the maximum value when the external incident frequency is equal to object the natural frequency. Experiments found that resonance intension of the object is changed, different objects resonance phenomena present different characteristics of ladders. Based on object orders resonance characteristics, the calculation method of object orders resonance is put forward in the paper, and the application for the light and sound waves on the seven order resonance characteristics by people feel, the result error is less than 1%.Visible in this paper, the method has high accuracy and usability. The calculation method reveals that some object resonance occur present order characteristic only four types, namely the first-orders resonance characteristics, third-orders characteristics, five orders characteristic, and seven orders characteristic.
Alphabetical order effects in school admissions
Czech Academy of Sciences Publication Activity Database
Jurajda, Štěpán; Münich, Daniel
2016-01-01
Roč. 31, č. 4 (2016), s. 483-498 ISSN 0267-1522 Institutional support: PRVOUK-P23 Keywords : admissions * alphabetical order * order effects Subject RIV: AH - Economics Impact factor: 1.033, year: 2016
China and the New International Order
DEFF Research Database (Denmark)
Jiang, Yang
2009-01-01
This article reviews the book "China and the New International Order," edited by Wang Gungwu and Zheng Yongnian.......This article reviews the book "China and the New International Order," edited by Wang Gungwu and Zheng Yongnian....
Research Quality, Fairness, and Authorship Order
DEFF Research Database (Denmark)
Ackerman, Margareta; Branzei, Simina
2012-01-01
of their last names, implying that all contributed equally, and by contribution, where authors are listed in decreasing order of their contribution to the paper. We perform a game theoretic analysis of the impact of author ordering schemes, uncovering two considerable advantages of alphabetical ordering......The order in which authors are listed on an academic paper determines the credit that each receives on a co-authored publication, influencing hiring, tenure and promotions. Two of the prevalent author ordering schemes are alphabetical, which involves listing authors in lexicographical order......: it leads to improved research quality, and it is the more fair of the two approaches in the worst case. On the other hand, contribution-based ordering results in a denser collaboration network and a greater number of publications than is achieved using alphabetical author ordering. Furthermore, authors can...
Word Order Acquisition in Persian Speaking Children
Directory of Open Access Journals (Sweden)
Nahid Jalilevand
2017-06-01
Discussion: Despite the fact that the spoken-Persian language has no strict word order, Persian-speaking children tend to use other logically possible orders of subject (S, verb (V, and object (O lesser than the SOV structure.
Higher order mode optical fiber Raman amplifiers
DEFF Research Database (Denmark)
Rottwitt, Karsten; Friis, Søren Michael Mørk; Usuga Castaneda, Mario A.
2016-01-01
We review higher order mode Raman amplifiers and discuss recent theoretical as well as experimental results including system demonstrations.......We review higher order mode Raman amplifiers and discuss recent theoretical as well as experimental results including system demonstrations....
Higher-order techniques in computational electromagnetics
Graglia, Roberto D
2016-01-01
Higher-Order Techniques in Computational Electromagnetics explains 'high-order' techniques that can significantly improve the accuracy, computational cost, and reliability of computational techniques for high-frequency electromagnetics, such as antennas, microwave devices and radar scattering applications.
Birth-Order Complementarity and Marital Adjustment.
Vos, Cornelia J. Vanderkooy; Hayden, Delbert J.
1985-01-01
Tested the influence of birth-order complementarity on marital adjustment among 327 married women using the Spanier Dyadic Adjustment Scale (1976). Birth-order complementarity was found to be unassociated with marital adjustment. (Author/BL)
Generalized Reduced Order Model Generation, Phase I
National Aeronautics and Space Administration — M4 Engineering proposes to develop a generalized reduced order model generation method. This method will allow for creation of reduced order aeroservoelastic state...
Fractional Order Element Based Impedance Matching
Radwan, Ahmed Gomaa; Salama, Khaled N.; Shamim, Atif
2014-01-01
Disclosed are various embodiments of methods and systems related to fractional order element based impedance matching. In one embodiment, a method includes aligning a traditional Smith chart (|.alpha.|=1) with a fractional order Smith chart (|.alpha
Indian Academy of Sciences (India)
Abstract. Order unit property of a positive element in a *-algebra is defined. It is proved that precisely projections satisfy this order theoretic property. This way, unital hereditary *-subalgebras of a *-algebra are characterized.
Critical thickness of atomically ordered III-V alloys
Energy Technology Data Exchange (ETDEWEB)
France, R. M.; McMahon, W. E.; Guthrey, H. L. [National Renewable Energy Laboratory, 15013 Denver West Parkway, Golden, Colorado 80401 (United States)
2015-10-12
The critical thickness model is modified with a general boundary energy that describes the change in bulk energy as a dislocation regularly alters the atomic structure of an ordered material. The model is evaluated for dislocations gliding through CuPt-ordered GaInP and GaInAs, where the boundary energy is negative and the boundary is stable. With ordering present, the critical thickness is significantly lowered and remains finite as the mismatch strain approaches zero. The reduction in critical thickness is most significant when the order parameter is greatest and the amount of misfit energy is low. The modified model is experimentally validated for low-misfit GaInP epilayers with varying order parameters using in situ wafer curvature and ex situ cathodoluminescence. With strong ordering, relaxation begins at a lower thickness and occurs at a greater rate, which is consistent with a lower critical thickness and increased glide force. Thus, atomic ordering is an important consideration for the stability of lattice-mismatched devices.
Photovoltaic Degradation Rates -- An Analytical Review
Energy Technology Data Exchange (ETDEWEB)
Jordan, D. C.; Kurtz, S. R.
2012-06-01
As photovoltaic penetration of the power grid increases, accurate predictions of return on investment require accurate prediction of decreased power output over time. Degradation rates must be known in order to predict power delivery. This article reviews degradation rates of flat-plate terrestrial modules and systems reported in published literature from field testing throughout the last 40 years. Nearly 2000 degradation rates, measured on individual modules or entire systems, have been assembled from the literature, showing a median value of 0.5%/year. The review consists of three parts: a brief historical outline, an analytical summary of degradation rates, and a detailed bibliography partitioned by technology.
Challenges in higher order mode Raman amplifiers
DEFF Research Database (Denmark)
Rottwitt, Karsten; Nielsen, Kristian; Friis, Søren Michael Mørk
2015-01-01
A higher order Raman amplifier model that take random mode coupling into account ispresented. Mode dependent gain and signal power fluctuations at the output of the higher order modeRaman amplifier are discussed......A higher order Raman amplifier model that take random mode coupling into account ispresented. Mode dependent gain and signal power fluctuations at the output of the higher order modeRaman amplifier are discussed...
Source of second order chromaticity in RHIC
International Nuclear Information System (INIS)
Luo, Y.; Gu, X.; Fischer, W.; Trbojevic, D.
2011-01-01
In this note we will answer the following questions: (1) what is the source of second order chromaticities in RHIC? (2) what is the dependence of second order chromaticity on the on-momentum β-beat? (3) what is the dependence of second order chromaticity on β* at IP6 and IP8? To answer these questions, we use the perturbation theory to numerically calculate the contributions of each quadrupole and sextupole to the first, second, and third order chromaticities.
Higher Order Expectations in Asset Pricing
Philippe BACCHETTA; Eric VAN WINCOOP
2004-01-01
We examine formally Keynes' idea that higher order beliefs can drive a wedge between an asset price and its fundamental value based on expected future payoffs. Higher order expectations add an additional term to a standard asset pricing equation. We call this the higher order wedge, which depends on the difference between higher and first order expectations of future payoffs. We analyze the determinants of this wedge and its impact on the equilibrium price. In the context of a dynamic noisy r...
Tunable fractional-order Fourier transformer
International Nuclear Information System (INIS)
Malyutin, A A
2006-01-01
A fractional two-dimensional Fourier transformer whose orders are tuned by means of optical quadrupoles is described. It is shown that in the optical scheme considered, the Fourier-transform order a element of [0,1] in one of the mutually orthogonal planes corresponds to the transform order (2-a) in another plane, i.e., to inversion and inverse Fourier transform of the order a. (laser modes and beams)
On Orders of Observables on Effect Algebras
Dvurečenskij, Anatolij
2017-12-01
On the set of bounded observables on an effect algebra, the Olson order defined by spectral resolutions and the standard order defined by a system of σ-additive states are introduced. We show that sharp bounded observables form a Dedekind σ-complete sublattice of a Dedekind complete lattice under the Olson order. In addition, we compare both orders, and we illustrate them on different effect algebras.
Higher order harmonics of reactor neutron equation
International Nuclear Information System (INIS)
Li Fu; Hu Yongming; Luo Zhengpei
1996-01-01
The flux mapping method using the higher order harmonics of the neutron equation is proposed. Based on the bi-orthogonality of the higher order harmonics, the process and formulas for higher order harmonics calculation are derived via the source iteration method with source correction. For the first time, not only any order harmonics for up-to-3-dimensional geometry are achieved, but also the preliminary verification to the capability for flux mapping have been carried out
19 CFR 4.74 - Transportation orders.
2010-04-01
... 19 Customs Duties 1 2010-04-01 2010-04-01 false Transportation orders. 4.74 Section 4.74 Customs... VESSELS IN FOREIGN AND DOMESTIC TRADES Foreign Clearances § 4.74 Transportation orders. Clearance shall... voyage would be in violation of any provision of any transportation order, regulation, or restriction...
An Analysis of Second-Order Autoshaping
Ward-Robinson, Jasper
2004-01-01
Three mechanisms can explain second-order conditioning: (1) The second-order conditioned stimulus (CS2) could activate a representation of the first-order conditioned stimulus (CS1), thereby provoking the conditioned response (CR); The CS2 could enter into an excitatory association with either (2) the representation governing the CR, or (3) with a…
40 CFR 209.24 - Default order.
2010-07-01
... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Default order. 209.24 Section 209.24... Orders Issued Under Section 11(d) of the Noise Control Act § 209.24 Default order. (a) Default. Respondent may be found to be in default upon failure to comply with a prehearing or hearing ruling of the...
2010-07-01
... 32 National Defense 5 2010-07-01 2010-07-01 false Travel orders. 726.6 Section 726.6 National... MENTALLY INCOMPETENT MEMBERS OF THE NAVAL SERVICE § 726.6 Travel orders. The Chief of Naval Personnel or the Deputy Commandant, Manpower & Reserve Affairs, may issue travel orders to a member to appear...
DEFF Research Database (Denmark)
Appel, Claus; van Oostrom, Vincent; Simonsen, Jakob Grue
2010-01-01
We show that, contrary to the situation in first-order term rewriting, almost none of the usual properties of rewriting are modular for higher-order rewriting, irrespective of the higher-order rewriting format. We show that for the particular format of simply typed applicative term rewriting...... systems modularity of confluence, normalization, and termination can be recovered by imposing suitable linearity constraints....
Overshooting Effects in Nonequilibrium Ordering Dynamics
DEFF Research Database (Denmark)
Gilhøj, Henriette; Jeppesen, Claus; Mouritsen, Ole G.
1995-01-01
Using Monte Carlo simulation on the simplest possible statistical mechanical model, the two-dimensional, nonconserved kinetic Ising model that undergoes an order-disorder transition, we show that the local order of the ordering domains, subsequent to a temperature quench, transiently overshoots...
Relevant cost information for order acceptance decisions
Wouters, M.J.F.
1997-01-01
Some economic considerations for order acceptance decisions are discussed. The relevant economic considerations for order acceptance are widely discussed in the literature: only those costs are relevant which would be avoidable by not accepting the order incremental costs plus opportunity costs .
Methodology, Birth Order, Intelligence, and Personality.
Michalski, Richard L.; Shackelford, Todd K.
2001-01-01
Critiques recent research on the effects of birth order on intelligence and personality, which found that the between-family design revealed that birth order negatively related to intelligence, while the within-family design revealed that birth order was unrelated to intelligence. Suggests that it may not be intelligence that co-varies with birth…
6 CFR 13.24 - Protective order.
2010-01-01
... 6 Domestic Security 1 2010-01-01 2010-01-01 false Protective order. 13.24 Section 13.24 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY PROGRAM FRAUD CIVIL REMEDIES § 13.24 Protective order. (a) A party or a prospective witness or deponent may file a motion for a protective order...
2010-10-01
... factors in the selection decision. (iii) Orders exceeding $5 million. For task or delivery orders in... procedures in 5.705. (11) When using the Governmentwide commercial purchase card as a method of payment, orders at or below the micro-purchase threshold are exempt from verification in the Central Contractor...
12 CFR 19.132 - Disciplinary orders.
2010-01-01
... PROCEDURE Disciplinary Proceedings Involving the Federal Securities Laws § 19.132 Disciplinary orders. (a... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Disciplinary orders. 19.132 Section 19.132... Comptroller may serve on the bank or persons concerned a disciplinary order, as provided in the Exchange Act...
International Nuclear Information System (INIS)
Maillard, D.
1993-01-01
The share of nuclear power in EDF production implies multiple rate structures. How are these rates determined. What are the new applications of electricity, and in particular those that make use of the especially low summer prices for electricity. These are topics of interest to the man in the street (witness EDF's recent 'red-white-blue' rates). This prompted the 'Nuclear Power in the Financial, Energy and Economic situation' department of France's nuclear power company to organize a conference bringing together an expert on rates - M.P. Bernard, head of the rate fixing service at the EDF's headquarters - and representatives from suppliers of equipment taking advantage of the various EDF rate options
Observed Barium Emission Rates
Stenbaek-Nielsen, H. C.; Wescott, E. M.; Hallinan, T. J.
1993-01-01
The barium releases from the CRRES satellite have provided an opportunity for verifying theoretically calculated barium ion and neutral emission rates. Spectra of the five Caribbean releases in the summer of 1991 were taken with a spectrograph on board a U.S. Air Force jet aircraft. Because the line of sight release densities are not known, only relative rates could be obtained. The observed relative rates agree well with the theoretically calculated rates and, together with other observations, confirm the earlier detailed theoretical emission rates. The calculated emission rates can thus with good accuracy be used with photometric observations. It has been postulated that charge exchange between neutral barium and oxygen ions represents a significant source for ionization. If so. it should be associated with emissions at 4957.15 A and 5013.00 A, but these emissions were not detected.
Petter Osmundsen; Knut Einar Rosendahl; Terje Skjerpen
2013-01-01
We examine the largest cost component in offshore development projects, drilling rates, which have been high over the last years. To our knowledge, rig rates have not been analysed empirically before in the economic literature. By econometric analysis we examine the effects on Gulf of Mexico rig rates of gas and oil prices, rig capacity utilization, contract length and lead time, and rig specific characteristics. Having access to a unique data set containing contract information, we are able ...
Bowen, Brent D.; Headley, Dean E.
2013-01-01
The Airline Quality Rating (AQR) was developed and first announced in early 1991 as an objective method for assessing airline quality on combined multiple performance criteria. This current report, the Airline Quality Rating 2013, reflects monthly Airline Quality Rating scores for calendar year 2012. AQR scores for 2013 are based on 15 elements in four major areas that focus on airline performance aspects important to air travel consumers over the calendar year of 2012. The Airline Quality...
2017-08-01
k2 – k1) 3.3 Universal Kinetic Rate Platform Development Kinetic rate models range from pure chemical reactions to mass transfer...14 8. The rate model that best fits the experimental data is a first-order or homogeneous catalytic reaction ...Avrami (7), and intraparticle diffusion (6) rate equations to name a few. A single fitting algorithm (kinetic rate model ) for a reaction does not
DEFF Research Database (Denmark)
Christiansen, Charlotte
2001-01-01
The paper aims to improve the knowledge of the empirical properties of the long maturity region of the forward rate curve. Firstly, the theoretical negative correlation between the slope at the long end of the forward rate curve and the term structure variance is recovered empirically and found...... to be statistically significant. Secondly, the expectations hypothesis is analyzed for the long maturity region of the forward rate curve using "forward rate" regressions. The expectations hypothesis is numerically close to being accepted but is statistically rejected. The findings provide mixed support...... for the affine term structure model....
Directory of Open Access Journals (Sweden)
Marina Pepić
2014-12-01
Full Text Available Interest rates changes have a huge impact on the business performance. Therefore, it is of great importance for the market participants to identify and adequately manage this risk. Financial derivatives are a relatively simple way of protection from adverse changes in interest rates. Interest rate swaps are particularly popular because they reduce interest rate risk to a minimum with a relatively low initial cost and without great risk, but also because of the fact that there are manymodifications of the standard swap created to better satisfy the different needs of market players.
75 FR 7985 - Blueberry Promotion, Research, and Information Order; Withdrawal of a Proposed Rule
2010-02-23
..., advertising, and promotion of highbush blueberries in the marketplace. The Council recommended increasing the...-09-0021; FV-09-704] Blueberry Promotion, Research, and Information Order; Withdrawal of a Proposed... amend the Blueberry Promotion, Research, and Information Order (Order) by increasing the assessment rate...
Optimization of an intracavity Q-switched solid-state second order Raman laser
Chen, Zhiqiong; Fu, Xihong; Peng, Hangyu; Zhang, Jun; Qin, Li; Ning, Yongqiang
2017-01-01
In this paper, the model of an intracavity Q-switched second order Raman laser is established, the characteristics of the output 2nd Stokes are simulated. The dynamic balance mechanism among intracavity conversion rates of stimulated emission, first order Raman and second order Raman is obtained. Finally, optimization solutions for increasing output 2nd Stokes pulse energy are proposed.
High-Order Frequency-Locked Loops
DEFF Research Database (Denmark)
Golestan, Saeed; Guerrero, Josep M.; Quintero, Juan Carlos Vasquez
2017-01-01
In very recent years, some attempts for designing high-order frequency-locked loops (FLLs) have been made. Nevertheless, the advantages and disadvantages of these structures, particularly in comparison with a standard FLL and high-order phase-locked loops (PLLs), are rather unclear. This lack...... study, and its small-signal modeling, stability analysis, and parameter tuning are presented. Finally, to gain insight about advantages and disadvantages of high-order FLLs, a theoretical and experimental performance comparison between the designed second-order FLL and a standard FLL (first-order FLL...