WorldWideScience

Sample records for prx-1 governing anodal

  1. Signaling pathways regulating the expression of Prx1 and Prx2 in the Chick Mandibular Mesenchyme

    Science.gov (United States)

    Doufexi, Aikaterini-El; Mina, Mina

    2009-01-01

    Prx1 and Prx2 are members of the aristaless-related homeobox genes shown to play redundant but essential roles in morphogenesis of the mandibular processes. To gain insight into the signaling pathways that regulate expression of Prx genes in the mandibular mesenchyme, we used the chick as a model system. We examined the patterns of gene expression in the face and the roles of signals derived from the epithelium on the expression of Prx genes in the mandibular mesenchyme. Our results demonstrated stage-dependent roles of mandibular epithelium on the expression of Prx in the mandibular mesenchyme and provide evidence for positive roles of members of the fibroblast and hedgehog families derived from mandibular epithelium on the expression of Prx genes in the mandibular mesenchyme. Our studies suggest that endothelin-1 signaling derived from the mesenchyme is involved in restricting the expression of Prx2 to the medial mandibular mesenchyme. PMID:18942149

  2. Laminar shear stress up-regulates peroxiredoxins (PRX) in endothelial cells: PRX 1 as a mechanosensitive antioxidant.

    Science.gov (United States)

    Mowbray, Amy L; Kang, Dong-Hoon; Rhee, Sue Goo; Kang, Sang Won; Jo, Hanjoong

    2008-01-18

    Shear stress plays a significant role in endothelial cell biology and atherosclerosis development. Previous work by our group has shown that fluid flow stimulates important functional changes in cells through protein expression regulation. Peroxiredoxins (PRX) are a family of antioxidant enzymes but have yet to be investigated in response to shear stress. Studies have shown that oscillatory shear stress (OS) increases reactive oxygen species (ROS) levels in endothelial cells, whereas laminar shear stress (LS) blocks this response. We hypothesized that PRX are responsible for the anti-oxidative effect of LS. To test this hypothesis, bovine aortic endothelial cells (BAEC) were subjected to LS (15 dyn/cm(2)), OS (+/-5 dyn/cm(2), 1 Hz), or static conditions for 24 h. Using Western blot and immunofluorescence staining, all six isoforms of PRX were identified in BAEC. When compared with OS and static, exposure to chronic LS up-regulated PRX 1 levels intracellularly. LS also increased expression of PRX 5 relative to static controls, but not OS. PRX exhibited broad subcellular localization, with distribution in the cytoplasm, Golgi, mitochondria, and intermediate filaments. In addition, PRX 1 knock down, using specific small interference RNA, attenuated LS-dependent reactive oxygen species reduction in BAEC. However, PRX 5 depletion did not. Together, these results suggest that PRX 1 is a novel mechanosensitive antioxidant, playing an important role in shear-dependent regulation of endothelial biology and atherosclerosis.

  3. Prx1 and Prx2 cooperatively regulate the morphogenesis of the medial region of the mandibular process

    Science.gov (United States)

    Balic, Anamaria; Adams, Douglas; Mina, Mina

    2009-01-01

    Mice lacking both Prx1 and Prx2 display severe abnormalities in the mandible. Our analysis showed that complete loss of Prx gene products leads to growth abnormalities in the mandibular processes evident as early as E10.5 associated with changes in the survival of the mesenchyme in the medial region. Changes in the gene expression in the medial and lateral regions were related to gradual loss of a subpopulation of mesenchyme in the medial region expressing eHand. Our analysis also showed that Prx gene products are required for the initiation and maintenance of chondrogenesis and terminal differentiation of the chondrocytes in the caudal and rostral ends of Meckel’s cartilage. The fusion of the mandibular processes in the Prx1/Prx2 double mutants is caused by accelerated ossification. These observations together show that during mandibular morphogenesis Prx gene products play multiple roles including the cell survival, the region-specific terminal differentiation of Meckelian chondrocytes and osteogenesis. PMID:19777594

  4. Liquid Silicon Pouch Anode

    Science.gov (United States)

    2017-09-06

    Docket No. 300139 1 of 13 LIQUID SILICON POUCH ANODE STATEMENT OF GOVERNMENT INTEREST [0001] The invention described herein may be manufactured... silicon -based anodes during cycling, lithium insertion and deinsertion. Mitigation of this problem has long been sought and will result in improved...with other potential lithium alloy materials such as gallium and tin. Silicon -based solid state anodes are typically composed of small particles of

  5. Anodic oxidation

    CERN Document Server

    Ross, Sidney D; Rudd, Eric J; Blomquist, Alfred T; Wasserman, Harry H

    2013-01-01

    Anodic Oxidation covers the application of the concept, principles, and methods of electrochemistry to organic reactions. This book is composed of two parts encompassing 12 chapters that consider the mechanism of anodic oxidation. Part I surveys the theory and methods of electrochemistry as applied to organic reactions. These parts also present the mathematical equations to describe the kinetics of electrode reactions using both polarographic and steady-state conditions. Part II examines the anodic oxidation of organic substrates by the functional group initially attacked. This part particular

  6. Hypoxia and Prx1 in Malignant Progression of Prostate Cancer

    Science.gov (United States)

    2006-09-01

    323–339. 46. Shenton, D.; Grant, C.M. Protein S-thiolation targets glycolysis and protein synthesis in response to oxidative stress in the yeast...P14742 Glucosamine fructose 6 phosphate aminotransferase 183-CKSC 1102 Q15181 Inorganic pyrophosphatase EC 3 6 1 1 Pyrophosph 5101 P20228 Glutamate...P14742 Glucosamine fructose 6 phosphate aminotransferase 183-CKSC 105 P39975 Hypothetical 26 8 kDa protein in DLD3 5 region 4-CPC J .-S . L ee et a l. 5

  7. Hypoxia and Prx1 in Malignant Progression of Prostate Cancer

    Science.gov (United States)

    2007-09-01

    a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 30-SEP-2007 2. REPORT TYPE...regulator in returning Nrf2, and thereby the expression of Nrf2 target genes, to steady- state level after its activation (44). Such an event would have...Molecular Graphics System. DeLano Scientific LLC, San Carlos, CA 35. Ghosh, D., Sawicki, M., Lala , P., Erman, M., Pangborn, W., Eyzaguirre, J

  8. Anode Support Creep

    DEFF Research Database (Denmark)

    2015-01-01

    Initial reduction temperature of an SOC is kept higher than the highest intended operation temperature of the SOC to keep the electrolyte under compression by the Anode Support at all temperatures equal to and below the maximum intended operation temperature....

  9. Lithium batteries, anodes, and methods of anode fabrication

    KAUST Repository

    Li, Lain-Jong

    2016-12-29

    Prelithiation of a battery anode carried out using controlled lithium metal vapor deposition. Lithium metal can be avoided in the final battery. This prelithiated electrode is used as potential anode for Li- ion or high energy Li-S battery. The prelithiation of lithium metal onto or into the anode reduces hazardous risk, is cost effective, and improves the overall capacity. The battery containing such an anode exhibits remarkably high specific capacity and a long cycle life with excellent reversibility.

  10. Sulfur tolerant anode materials

    Energy Technology Data Exchange (ETDEWEB)

    1987-02-01

    The goal of this program is the development of a molten carbonate fuel cell (MCFC) anode which is more tolerant of sulfur contaminants in the fuel than the current state-of-the-art nickel-based anode structures. This program addresses two different but related aspects of the sulfur contamination problem. The primary aspect is concerned with the development of a sulfur tolerant electrocatalyst for the fuel oxidation reaction. A secondary issue is the development of a sulfur tolerant water-gas-shift reaction catalyst and an investigation of potential steam reforming catalysts which also have some sulfur tolerant capabilities. These two aspects are being addressed as two separate tasks.

  11. Anodes sliced with ions

    NARCIS (Netherlands)

    Boukamp, Bernard A.

    2006-01-01

    A detailed image of a complex fuel-cell anode structure, obtained through ion-beam milling, SEM imaging and advanced digital reconstruction, yields an accurate description of the three-dimensional structure, and enables correct prediction of the electrode's properties

  12. Anodes for alkaline electrolysis

    Science.gov (United States)

    Soloveichik, Grigorii Lev [Latham, NY

    2011-02-01

    A method of making an anode for alkaline electrolysis cells includes adsorption of precursor material on a carbonaceous material, conversion of the precursor material to hydroxide form and conversion of precursor material from hydroxide form to oxy-hydroxide form within the alkaline electrolysis cell.

  13. Inert Anode Report

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1999-07-01

    This ASME report provides a broad assessment of open literature and patents that exist in the area of inert anodes and their related cathode systems and cell designs, technologies that are relevant for the advanced smelting of aluminum. The report also discusses the opportunities, barriers, and issues associated with these technologies from a technical, environmental, and economic viewpoint.

  14. Ohmic resistance affects microbial community and electrochemical kinetics in a multi-anode microbial electrochemical cell

    Science.gov (United States)

    Multi-anode microbial electrochemical cells (MXCs) are considered as one of the most promising configurations for scale-up of MXCs, but fundamental understanding of anode kinetics governing current density is limited in the MXCs. In this study we first assessed microbial communi...

  15. Mesoporous Silicon-Based Anodes

    Science.gov (United States)

    Peramunage, Dharmasena

    2015-01-01

    For high-capacity, high-performance lithium-ion batteries. A new high-capacity anode composite based on mesoporous silicon is being developed. With a structure that resembles a pseudo one-dimensional phase, the active anode material will accommodate significant volume changes expected upon alloying and dealloying with lithium (Li).

  16. Anodic Concentration Polarization in SOFCs

    Energy Technology Data Exchange (ETDEWEB)

    Williford, Rick E.; Chick, Lawrence A.; Maupin, Gary D.; Simner, Steve P.; Stevenson, Jeffry W.; Khaleel, Mohammad A.; Wachsman, ED, et al

    2003-08-01

    Concentration polarization is important because it determines the maximum power output of a solid oxide fuel cell (SOFC) at high fuel utilization. Anodic concentration polarization occurs when the demand for reactants exceeds the capacity of the porous ceramic anode to supply them by gas diffusion mechanisms. High tortuosities (bulk diffusion resistances) are often assumed to explain this behavior. However, recent experiments show that anodic concentration polarization originates in the immediate vicinity of the reactive triple phase boundary (TPB) sites near the anode/electrolyte interface. A model is proposed to describe how concentration polarization is controlled by two localized phenomena: competitive adsorption of reactants in areas adjacent to the reactive TPB sites, followed by relatively slow surface diffusion to the reactive sites. Results suggest that future SOFC design improvements should focus on optimization of the reactive area, adsorption, and surface diffusion at the anode/electrolyte interface.

  17. Nano structural anodes for radiation detectors

    Science.gov (United States)

    Cordaro, Joseph V.; Serkiz, Steven M.; McWhorter, Christopher S.; Sexton, Lindsay T.; Retterer, Scott T.

    2015-07-07

    Anodes for proportional radiation counters and a process of making the anodes is provided. The nano-sized anodes when present within an anode array provide: significantly higher detection efficiencies due to the inherently higher electric field, are amenable to miniaturization, have low power requirements, and exhibit a small electromagnetic field signal. The nano-sized anodes with the incorporation of neutron absorbing elements (e.g., .sup.10B) allow the use of neutron detectors that do not use .sup.3He.

  18. Electrically Conductive Anodized Aluminum Surfaces

    Science.gov (United States)

    Nguyen, Trung Hung

    2006-01-01

    Anodized aluminum components can be treated to make them sufficiently electrically conductive to suppress discharges of static electricity. The treatment was conceived as a means of preventing static electric discharges on exterior satin-anodized aluminum (SAA) surfaces of spacecraft without adversely affecting the thermal-control/optical properties of the SAA and without need to apply electrically conductive paints, which eventually peel off in the harsh environment of outer space. The treatment can also be used to impart electrical conductivity to anodized housings of computers, medical electronic instruments, telephoneexchange equipment, and other terrestrial electronic equipment vulnerable to electrostatic discharge. The electrical resistivity of a typical anodized aluminum surface layer lies between 10(exp 11) and 10(exp 13) Omega-cm. To suppress electrostatic discharge, it is necessary to reduce the electrical resistivity significantly - preferably to conductive metal oxide nanocomposite. Filling the pores with the nanocomposite reduces the transverse electrical resistivity and, in the original intended outer-space application, the exterior covering portion of the nanocomposite would afford the requisite electrical contact with the outer-space plasma. The electrical resistivity of the nanocomposite can be tailored to a value between 10(exp 7) and 10(exp 12) Omega-cm. Unlike electrically conductive paint, the nanocomposite becomes an integral part of the anodized aluminum substrate, without need for adhesive bonding material and without risk of subsequent peeling. The electrodeposition process is compatible with commercial anodizing production lines. At present, the electronics industry uses expensive, exotic, electrostaticdischarge- suppressing finishes: examples include silver impregnated anodized, black electroless nickel, black chrome, and black copper. In comparison with these competing finishes, the present nanocomposite finishes are expected to cost 50

  19. Anodes for Rechargeable Lithium-Sulfur Batteries

    Energy Technology Data Exchange (ETDEWEB)

    Cao, Ruiguo; Xu, Wu; Lu, Dongping; Xiao, Jie; Zhang, Jiguang

    2015-04-10

    In this work, we will review the recent developments on the protection of Li metal anode in Li-S batteries. Various strategies used to minimize the corrosion of Li anode and reducing its impedance increase will be analyzed. Other potential anodes used in sulfur based rechargeable batteries will also be discussed.

  20. Ellipsometry of anodic film growth

    Energy Technology Data Exchange (ETDEWEB)

    Smith, C.G.

    1978-08-01

    An automated computer interpretation of ellisometer measurements of anodic film growth was developed. Continuous mass and charge balances were used to utilize more fully the time dependence of the ellipsometer data and the current and potential measurements. A multiple-film model was used to characterize the growth of films which proceeds via a dissolution--precipitation mechanism; the model also applies to film growth by adsorption and nucleation mechanisms. The characteristic parameters for film growth describe homogeneous and heterogeneous crystallization rates, film porosities and degree of hydration, and the supersaturation of ionic species in the electrolyte. Additional descriptions which may be chosen are patchwise film formation, nonstoichiometry of the anodic film, and statistical variations in the size and orientation of secondary crystals. Theories were developed to describe the optical effects of these processes. An automatic, self-compensating ellipsometer was used to study the growth in alkaline solution of anodic films on silver, cadmium, and zinc. Mass-transport conditions included stagnant electrolyte and forced convection in a flow channel. Multiple films were needed to characterize the optical properties of these films. Anodic films grew from an electrolyte supersatuated in the solution-phase dissolution product. The degree of supersaturation depended on transport conditions and had a major effect on the structure of the film. Anodic reaction rates were limited by the transport of charge carriers through a primary surface layer. The primary layers on silver, zinc, and cadmium all appeared to be nonstoichiometric, containing excess metal. Diffusion coefficients, transference numbers, and the free energy of adsorption of zinc oxide were derived from ellipsometer measurements. 97 figures, 13 tables, 198 references.

  1. Interactive governance

    DEFF Research Database (Denmark)

    Sørensen, Eva; Torfing, Jacob; Peters, B. Guy

    Governance has become one of the most commonly used concepts in contemporary political science. It is, however, often used to mean a variety of different things. This book helps to clarify this conceptual muddle by concentrating on one variety of governance-interactive governance. The authors argue...... that although the state may remain important for many aspects of governing, interactions between state and society represent an important, and perhaps increasingly important, dimension of governance. These interactions may be with social actors such as networks, with market actors or with other governments......, but all these forms represent means of governing involving mixtures of state action with the actions of other entities.This book explores thoroughly this meaning of governance, and links it to broader questions of governance. In the process of explicating this dimension of governance the authors also...

  2. [Vernier Anode Design and Image Simulation].

    Science.gov (United States)

    Zhao, Ai-rong; Ni, Qi-liang; Song, Ke-fei

    2015-12-01

    Based-MCP position-sensitive anode photon-counting imaging detector is good at detecting extremely faint light, which includes micro-channel plate (MCP), position-sensitive anode and readout, and the performances of these detectors are mainly decided by the position-sensitive anode. As a charge division anode, Vernier anode using cyclically varying electrode areas which replaces the linearly varying electrodes of wedge-strip anode can get better resolution and greater electrode dynamic range. Simulation and design of the Vernier anode based on Vernier's decode principle are given here. Firstly, we introduce the decode and design principle of Vernier anode with nine electrodes in vector way, and get the design parameters which are the pitch, amplitude and the coarse wavelength of electrode. Secondly, we analyze the effect of every design parameters to the imaging of the detector. We simulate the electron cloud, the Vernier anode and the detector imaging using Labview software and get the relationship between the pitch and the coarse wavelength of the anode. Simultaneously, we get the corresponding electron cloud for the designing parameters. Based on the result of the simulation and the practical machining demand, a nine electrodes Vernier anode was designed and fabricated which has a pitch of 891 µm, insulation width of 25 µm, amplitude of 50 µm, coarse pixel numbers of 5.

  3. Fabrication of advanced design (grooved) cermet anodes

    Energy Technology Data Exchange (ETDEWEB)

    Windisch, C.F. Jr. [Pacific Northwest Lab., Richland, WA (United States); Huettig, F.R. [Ceramic Magnetics, Inc., Fairfield, NJ (United States)

    1993-05-01

    Attempts were made to fabricate full-size anodes with advanced, or grooved, design using isostatic pressing, slip casting injection molding. Of the three approaches, isostatic pressing produced an anode with dimensions nearest to the target specifications, without serious macroscopic flaws. This approach is considered the most promising for making advanced anodes for aluminum smelting. However, significant work still remains to optimize the physical properties and microstructure of the anode, both of which were significantly different from that of previous anodes. Injection molding and slip casting yielded anode materials with serious deficiencies, including cracks and holes. Injection molding gave cermet material with the best intrinsic microstructure, i.e., the microstructure of the material between macroscopic flaws was very similar to that of anodes previously made at PNL. Reason for the similarity may have to do with amount of residual binder in the material prior to sintering.

  4. Interactive Governance

    DEFF Research Database (Denmark)

    Bang, Henrik

    2016-01-01

    Governance analysis has exploded in recent years, and it has become nearly impossible to tell what difference the concept and practice of governance makes from those of government and state. In addition governance analysis has been placed more and more in the shadow of the new institutionalisms and...... and growth. However, interactive governance is not a property or effect of institutions; nor does it apply solely to those individuals who seek success above everything else. It is connective more than individualistic or collectivistic in nature; and it manifests a governability capacity which...

  5. Electronic Government

    DEFF Research Database (Denmark)

    Wimmer, Maria A.; Traunmüller, Roland; Grönlund, Åke

    This book constitutes the refereed proceedings of the 4th International Conference on Electronic Government, EGOV 2005, held in Copenhagen, Denmark, in August 2005. The 30 revised papers presented were carefully reviewed and selected from numerous submissions, and assess the state-of-the-art in e-government/e-governance...

  6. Microbial fuel cell with improved anode

    Science.gov (United States)

    Borole, Abhijeet P.

    2010-04-13

    The present invention relates to a method for preparing a microbial fuel cell, wherein the method includes: (i) inoculating an anodic liquid medium in contact with an anode of the microbial fuel cell with one or more types of microorganisms capable of functioning by an exoelectrogenic mechanism; (ii) establishing a biofilm of the microorganisms on and/or within the anode along with a substantial absence of planktonic forms of the microorganisms by substantial removal of the planktonic microorganisms during forced flow and recirculation conditions of the anodic liquid medium; and (iii) subjecting the microorganisms of the biofilm to a growth stage by incorporating one or more carbon-containing nutritive compounds in the anodic liquid medium during biofilm formation or after biofilm formation on the anode has been established.

  7. Anode Sheath Switching in a Carbon Nanotube Arc Plasma

    Energy Technology Data Exchange (ETDEWEB)

    Abe Fetterman, Yevgeny Raitses, and Michael Keidar

    2008-04-08

    The anode ablation rate is investigated as a function of anode diameter for a carbon nanotube arc plasma. It is found that anomalously high ablation occurs for small anode diameters. This result is explained by the formation of a positive anode sheath. The increased ablation rate due to this positive anode sheath could imply greater production rate for carbon nanotubes.

  8. Plural Governance

    DEFF Research Database (Denmark)

    Mols, Niels Peter; Menard, Claude

    2014-01-01

    Plural governance is a form of governance where a firm both makes and buys similar goods or services. Despite a widespread use of plural governance there are no transaction cost models of how plural governance affects performance. This paper reviews the literature about plural forms and proposes...... a model relating transaction cost and resource-based variables to the cost of the plural form. The model is then used to analyze when the plural form is efficient compared to alternative governance structures. We also use the model to discuss the strength of three plural form synergies....

  9. Program governance

    CERN Document Server

    Khan, Muhammad Ehsan

    2014-01-01

    FOUNDATION OF GOVERNANCEGovernanceDefining GovernanceGovernance at Multiple LevelsSummaryReferencesTransaction Cost EconomicsTransactions-Core Elements and Attributes     Behavioral Assumptions     Governance Structure AttributesHazards of Concern     Incomplete Contracting     Bilateral Dependency and Fundamental Transformation     Adaptation or MaladaptationLinking Governance, Governance Structures, and ContractsThe Impact of Asset Specificity and Behavioral Assumptions on ContractsAp

  10. Anodizing And Sealing Aluminum In Nonchromated Solutions

    Science.gov (United States)

    Emmons, John R.; Kallenborn, Kelli J.

    1995-01-01

    Improved process for anodizing and sealing aluminum involves use of 5 volume percent sulfuric acid in water as anodizing solution, and 1.5 to 2.0 volume percent nickel acetate in water as sealing solution. Replaces process in which sulfuric acid used at concentrations of 10 to 20 percent. Improved process yields thinner coats offering resistance to corrosion, fatigue life, and alloy-to-alloy consistency equal to or superior to those of anodized coats produced with chromated solutions.

  11. Electronic Government

    DEFF Research Database (Denmark)

    Wimmer, Maria A.; Traunmüller, Roland; Grönlund, Åke

    This book constitutes the refereed proceedings of the 4th International Conference on Electronic Government, EGOV 2005, held in Copenhagen, Denmark, in August 2005. The 30 revised papers presented were carefully reviewed and selected from numerous submissions, and assess the state-of-the-art in e......-government/e-governance and provide guidance for research, development and application of this emerging field. The papers are arranged in topical sections on challenges, performance, strategy, knowledge, and technology....

  12. Computational modeling of anodic current distribution and anode shape change in aluminium reduction cells

    Directory of Open Access Journals (Sweden)

    Xu Y.

    2015-01-01

    Full Text Available In aluminium reduction cells, the profile of a new carbon anode changes with time before reaching a steady state shape, since the anode consumption rate, depending on the current density normal to anode surfaces, varies from one region to another. In this paper, a two-dimension model based on Laplace equation and Tafel equation was built up to calculate the secondary current distribution, and the shift of anode shape with time was simulated with arbitrary Lagrangian-Eulerian method. The time it takes to reach the steady shape for the anode increases with the enlargement of the width of the channels between the anodes or between the anode and the sidewall. This time can be shortened by making a sloped bottom or cutting off the lower corners of the new anode. Forming two slots in the bottom surface increases the anodic current density at the underside of the anode, but leads to the enlargement of the current at the side of the anode.

  13. Corporate Governance

    OpenAIRE

    International Finance Corporation; UN Global Compact

    2017-01-01

    Corporate citizenship - a commitment to ethical behavior in business strategy, operations, and culture - has been on the periphery of corporate governance and board leadership, linked mainly to corporate reputation. However, in today’s globalized and interconnected world, investors, creditors, and other stakeholders have come to recognize that environmental, social, and governance responsi...

  14. Origin of electrolyte-dopant dependent sulfur poisoning of SOFC anodes

    DEFF Research Database (Denmark)

    Zeng, Zhenhua; Björketun, Mårten E; Ebbesen, Sune

    2013-01-01

    + and the sulfur tolerance of the Ni-XSZ anode; the smaller the ionic radius, the higher the sulfur tolerance. The mechanistic study shows that the size of X3+ strongly influences XSZ's surface energy, which in turn determines the adhesion of Ni to XSZ. The Ni-XSZ interaction has a direct impact on the Ni......The mechanisms governing the sulfur poisoning of the triple phase boundary (TPB) of Ni-XSZ (X2O3 stabilized zirconia) anodes have been investigated using density functional theory. The calculated sulfur adsorption energies reveal a clear correlation between the size of the cation dopant X3...

  15. The Nitrogen-Nitride Anode.

    Energy Technology Data Exchange (ETDEWEB)

    Delnick, Frank M.

    2014-10-01

    Nitrogen gas N 2 can be reduced to nitride N -3 in molten LiCl-KCl eutectic salt electrolyte. However, the direct oxidation of N -3 back to N 2 is kinetically slow and only occurs at high overvoltage. The overvoltage for N -3 oxidation can be eliminated by coordinating the N -3 with BN to form the dinitridoborate (BN 2 -3 ) anion which forms a 1-D conjugated linear inorganic polymer with -Li-N-B-N- repeating units. This polymer precipitates out of solution as Li 3 BN 2 which becomes a metallic conductor upon delithiation. Li 3 BN 2 is oxidized to Li + + N 2 + BN at about the N 2 /N -3 redox potential with very little overvoltage. In this report we evaluate the N 2 /N -3 redox couple as a battery anode for energy storage.

  16. Government Organizations

    DEFF Research Database (Denmark)

    Krause Hansen, Hans; Salskov-Iversen, Dorte

    2017-01-01

    This entry is concerned with demonstrating the increasingly important interface between government organization and communication. Government organization can be approached in terms of state centrism, where the emphasis is on government organization understood as state authority and power......, with clearly defined boundaries between the public and private; and in terms of polycentrism, where power and authority are seen as dispersed among state and nonstate organizations, including business and civil society organizations. Globalization and new media technologies imply changes in the relationship...... between power, communication, and organizational forms, and suggest the usefulness of viewing government organization in terms of polycentrism, highlighting communication and organizing processes in a wider perspective. The entry focuses particularly on two major strands of literature: deliberative...

  17. Corporate Governance

    OpenAIRE

    Mostepaniuk, Alla

    2017-01-01

    The purpose of this study is to analyze and understand the recently introduced form of managementof a company limited by shares. The Law no. 441/2006, which fundamentally amended Company Law,created this form of controlling the company, the corporate governance, but the legislation does not explicitlydefine what it wants to achieve through this instrument. This topic is recent in research as the theme ofgerman-roman commercial law systems (in French corporate governance system was introduced ...

  18. Organizational governance

    DEFF Research Database (Denmark)

    Foss, Nicolai Juul; Klein, Peter G.

    This chapter reviews and discusses rational-choice approaches to organizational governance. These approaches are found primarily in organizational economics (virtually no rational-choice organizational sociology exists), particularly in transaction cost economics, principal-agent theory, and the ......This chapter reviews and discusses rational-choice approaches to organizational governance. These approaches are found primarily in organizational economics (virtually no rational-choice organizational sociology exists), particularly in transaction cost economics, principal-agent theory...

  19. EFFECT OF PHOSPHORIC ACID CONCENTRATION AND ANODIZING TIME ON THE PROPERTIES OF ANODIC FILMS ON TITANIUM

    Directory of Open Access Journals (Sweden)

    DIMAS L. TORRES

    2015-07-01

    Full Text Available In this study, it was investigated the influence of electrolyte concentration and anodizing time on the electrochemical behaviour and morphology of anodic films formed on commercially pure Ti. Electrochemical methods and surface analyses were used to characterize the films. It was found that the electrolyte concentration and anodizing time affect the growth and protective characteristics of films in a physiologic medium. It was possible to observe their non-uniformity on Ti substrates under the tested conditions. In potentiodynamic profiles, it was observed that passivation current values are affected by an anodizing time increase. Variations in impedance spectra were associated with an increase of defects within the film.

  20. Anode-Free Rechargeable Lithium Metal Batteries

    Energy Technology Data Exchange (ETDEWEB)

    Qian, Jiangfeng [The Joint Center for Energy Storage Research (JCESR), Pacific Northwest National Laboratory, Richland WA 99354 USA; Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland WA 99354 USA; Adams, Brian D. [The Joint Center for Energy Storage Research (JCESR), Pacific Northwest National Laboratory, Richland WA 99354 USA; Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland WA 99354 USA; Zheng, Jianming [Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland WA 99354 USA; Xu, Wu [The Joint Center for Energy Storage Research (JCESR), Pacific Northwest National Laboratory, Richland WA 99354 USA; Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland WA 99354 USA; Henderson, Wesley A. [Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland WA 99354 USA; Wang, Jun [A123 Systems Research and Development, Waltham MA 02451 USA; Bowden, Mark E. [Environmental and Molecular Sciences Laboratory, Pacific Northwest National Laboratory, Richland WA 99354 USA; Xu, Suochang [Earth and Biological Science Directorate, Pacific Northwest National Laboratory, Richland WA 99354 USA; Hu, Jianzhi [The Joint Center for Energy Storage Research (JCESR), Pacific Northwest National Laboratory, Richland WA 99354 USA; Earth and Biological Science Directorate, Pacific Northwest National Laboratory, Richland WA 99354 USA; Zhang, Ji-Guang [The Joint Center for Energy Storage Research (JCESR), Pacific Northwest National Laboratory, Richland WA 99354 USA; Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland WA 99354 USA

    2016-08-18

    Anode-free rechargeable lithium (Li) batteries (AFLBs) are phenomenal energy storage systems due to their significantly increased energy density and reduced cost relative to Li-ion batteries, as well as ease of assembly owing to the absence of an active (reactive) anode material. However, significant challenges, including Li dendrite growth and low cycling Coulombic efficiency (CE), have prevented their practical implementation. Here, we report for the first time an anode-free rechargeable lithium battery based on a Cu||LiFePO4 cell structure with an extremely high CE (> 99.8%). This results from the utilization of both an exceptionally stable electrolyte and optimized charge/discharge protocols which minimize the corrosion of the in-situ formed Li metal anode.

  1. Graphite: An active or an inactive anode?

    Energy Technology Data Exchange (ETDEWEB)

    Rueffer, Matthew; Bejan, Dorin [Electrochemical Technology Centre, Chemistry Department, University of Guelph, 50 Stone Road East, Guelph Ontario, N1G 2W1 (Canada); Bunce, Nigel J., E-mail: nbunce@uoguelph.c [Electrochemical Technology Centre, Chemistry Department, University of Guelph, 50 Stone Road East, Guelph Ontario, N1G 2W1 (Canada)

    2011-02-01

    Positive polarization of a graphite anode in aqueous solution functionalizes the surface and releases soluble organic carbon to the solution concurrent with the electrolysis of water. Mineralization of the anode occurs at more positive potentials, and can be explained as a repetitive sequence involving functionalization, oxidation to carboxyl, and Kolbe decarboxylation, without recourse to hydroxyl radicals. Other lines of evidence against the intermediacy of hydroxyl radicals include the resistance of p-benzoquinone towards oxidation at graphite - i.e., graphite does not function as an inactive anode towards the oxidation of added substrates. A direct electron transfer mechanism operates for substrates that are oxidizable in the range of water stability, such as acetaminophen and sulfide ion. In the potential range of oxygen evolution we propose that graphite behaves as a modified active anode, at which the oxygen atom to be transferred to an oxidizable substrate first becomes bonded to the previously functionalized surface.

  2. Stakeholder Governance

    DEFF Research Database (Denmark)

    Flak, Leif Skiftenes; Rose, Jeremy

    2005-01-01

    The e-government field, like most young fields, lacks a strong body of well-developed theory. One strategy for coping with theoretical immaturity is to import and adapt theories from other, more mature fields. This study reviews Stakeholder Theory (ST) and investigates its potential in relation...... to e-Government. Originally a management theory, stakeholder theory advocates addressing the concerns of all stakeholders in a firm, as opposed to concentration on the interests of senior managers and stockholders. Apart from the original profit focus, there is no serious conceptual mismatch between...... stakeholder theory and government’s objective of providing policy and services for citizens and organizations – society’s stakeholders. Potential problems with adapting a management theory to a government setting are discussed. The paper further discusses how information technology impacts a stakeholder model...

  3. Anodic growth of titanium dioxide nanostructures

    DEFF Research Database (Denmark)

    2010-01-01

    Disclosed is a method of producing nanostructures of titanium dioxide (TiO 2 ) by anodisation of titanium (Ti) in an electrochemical cell, comprising the steps of: immersing a non-conducting substrate coated with a layer of titanium, defined as the anode, in an electrolyte solution...... an electrical contact to the layer of titanium on the anode, where the electrical contact is made in the electrolyte solution...

  4. Lithium Ion Battery Anode Aging Mechanisms

    Science.gov (United States)

    Agubra, Victor; Fergus, Jeffrey

    2013-01-01

    Degradation mechanisms such as lithium plating, growth of the passivated surface film layer on the electrodes and loss of both recyclable lithium ions and electrode material adversely affect the longevity of the lithium ion battery. The anode electrode is very vulnerable to these degradation mechanisms. In this paper, the most common aging mechanisms occurring at the anode during the operation of the lithium battery, as well as some approaches for minimizing the degradation are reviewed. PMID:28809211

  5. Fibrous zinc anodes for high power batteries

    Science.gov (United States)

    Zhang, X. Gregory

    This paper introduces newly developed solid zinc anodes using fibrous material for high power applications in alkaline and large size zinc-air battery systems. The improved performance of the anodes in these two battery systems is demonstrated. The possibilities for control of electrode porosity and for anode/battery design using fibrous materials are discussed in light of experimental data. Because of its mechanical integrity and connectivity, the fibrous solid anode has good electrical conductivity, mechanical stability, and design flexibility for controlling mass distribution, porosity and effective surface area. Experimental data indicated that alkaline cells made of such anodes can have a larger capacity at high discharging currents than commercially available cells. It showed even greater improvement over commercial cells with a non-conventional cell design. Large capacity anodes for a zinc-air battery have also been made and have shown excellent material utilization at various discharge rates. The zinc-air battery was used to power an electric bicycle and demonstrated good results.

  6. Structural transformation of nickel hydroxide films during anodic oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Crocker, Robert W. [Univ. of California, Berkeley, CA (United States); Muller, Rolf H. [Univ. of California, Berkeley, CA (United States)

    1992-05-01

    The transformation of anodically formed nickel hydroxide/oxy-hydroxide electrodes has been investigated. A mechanism is proposed for the anodic oxidation reaction, in which the reaction interface between the reduced and oxidized phases of the electrode evolves in a nodular topography that leads to inefficient utilization of the active electrode material. In the proposed nodular transformation model for the anodic oxidation reaction, nickel hydroxide is oxidized to nickel oxy-hydroxide in the region near the metal substrate. Since the nickel oxy-hydroxide is considerably more conductive than the surrounding nickel hydroxide, as further oxidation occurs, nodular features grow rapidly to the film/electrolyte interface. Upon emerging at the electrolyte interface, the reaction boundary between the nickel hydroxide and oxy-hydroxide phases spreads laterally across the film/electrolyte interface, creating an overlayer of nickel oxy-hydroxide and trapping uncharged regions of nickel hydroxide within the film. The nickel oxy-hydroxide overlayer surface facilitates the oxygen evolution side reaction. Scanning tunneling microscopy of the electrode in its charged state revealed evidence of 80 - 100 Angstrom nickel oxy-hydroxide nodules in the nickel hydroxide film. In situ spectroscopic ellipsometer measurements of films held at various constant potentials agree quantitatively with optical models appropriate to the nodular growth and subsequent overgrowth of the nickel oxy-hydroxide phase. A two-dimensional, numerical finite difference model was developed to simulate the current distribution along the phase boundary between the charged and uncharged material. The model was used to explore the effects of the physical parameters that govern the electrode behavior. The ratio of the conductivities of the nickel hydroxide and oxy-hydroxide phases was found to be the dominant parameter in the system.

  7. Structural transformation of nickel hydroxide films during anodic oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Crocker, R.W.; Muller, R.H.

    1992-05-01

    The transformation of anodically formed nickel hydroxide/oxy-hydroxide electrodes has been investigated. A mechanism is proposed for the anodic oxidation reaction, in which the reaction interface between the reduced and oxidized phases of the electrode evolves in a nodular topography that leads to inefficient utilization of the active electrode material. In the proposed nodular transformation model for the anodic oxidation reaction, nickel hydroxide is oxidized to nickel oxy-hydroxide in the region near the metal substrate. Since the nickel oxy-hydroxide is considerably more conductive than the surrounding nickel hydroxide, as further oxidation occurs, nodular features grow rapidly to the film/electrolyte interface. Upon emerging at the electrolyte interface, the reaction boundary between the nickel hydroxide and oxy-hydroxide phases spreads laterally across the film/electrolyte interface, creating an overlayer of nickel oxy-hydroxide and trapping uncharged regions of nickel hydroxide within the film. The nickel oxy-hydroxide overlayer surface facilitates the oxygen evolution side reaction. Scanning tunneling microscopy of the electrode in its charged state revealed evidence of 80 {endash} 100 Angstrom nickel oxy-hydroxide nodules in the nickel hydroxide film. In situ spectroscopic ellipsometer measurements of films held at various constant potentials agree quantitatively with optical models appropriate to the nodular growth and subsequent overgrowth of the nickel oxy-hydroxide phase. A two-dimensional, numerical finite difference model was developed to simulate the current distribution along the phase boundary between the charged and uncharged material. The model was used to explore the effects of the physical parameters that govern the electrode behavior. The ratio of the conductivities of the nickel hydroxide and oxy-hydroxide phases was found to be the dominant parameter in the system.

  8. Corporate Governance

    International Development Research Centre (IDRC) Digital Library (Canada)

    the developing world, adhere to good governance practices, and uphold the public interest. The IDRC Act specifies that at least 11 of the Governors must have experience in international development or a background in the natural or social sciences, or in tech- nology. These stipulations are reflected in a profile of skills.

  9. Electronic Government

    DEFF Research Database (Denmark)

    Wimmer, Maria A.; Traunmüller, Roland; Grönlund, Åke

    This book constitutes the refereed proceedings of the 4th International Conference on Electronic Government, EGOV 2005, held in Copenhagen, Denmark, in August 2005. The 30 revised papers presented were carefully reviewed and selected from numerous submissions, and assess the state-of-the-art in e...

  10. Passivation Behaviour of Anode in Copper Electrorefining Using Recycled Low-grade Copper Anode

    National Research Council Canada - National Science Library

    Koudai TOKUSHIGE; Kohei MORI; Satoshi OUE; Hiroshi MATSUSHIMA; Kazunari SUZUKI; Hiroaki NAKANO

    2017-01-01

    ... of 11.4 hours in the solution containing Ni2+ ions as impurity. At normal dissolution of copper anode, copper parent phase dissolved in the form of dendrite and the framework of anode slime was composed of remained Cu-Ni-Sb-Sn-As compound...

  11. New High-Energy Nanofiber Anode Materials

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Xiangwu [North Carolina State Univ., Raleigh, NC (United States); Fedkiw, Peter [North Carolina State Univ., Raleigh, NC (United States); Khan, Saad [North Carolina State Univ., Raleigh, NC (United States); Huang, Alex [North Carolina State Univ., Raleigh, NC (United States); Fan, Jiang [North Carolina State Univ., Raleigh, NC (United States)

    2013-11-15

    The overall goal of the proposed work was to use electrospinning technology to integrate dissimilar materials (lithium alloy and carbon) into novel composite nanofiber anodes, which simultaneously had high energy density, reduced cost, and improved abuse tolerance. The nanofiber structure allowed the anodes to withstand repeated cycles of expansion and contraction. These composite nanofibers were electrospun into nonwoven fabrics with thickness of 50 μm or more, and then directly used as anodes in a lithium-ion battery. This eliminated the presence of non-active materials (e.g., conducting carbon black and polymer binder) and resulted in high energy and power densities. The nonwoven anode structure also provided a large electrode-electrolyte interface and, hence, high rate capacity and good lowtemperature performance capability. Following are detailed objectives for three proposed project periods. During the first six months: Obtain anodes capable of initial specific capacities of 650 mAh/g and achieve ~50 full charge/discharge cycles in small laboratory scale cells (50 to 100 mAh) at the 1C rate with less than 20 percent capacity fade; In the middle of project period: Assemble, cycle, and evaluate 18650 cells using proposed anode materials, and demonstrate practical and useful cycle life (750 cycles of ~70% state of charge swing with less than 20% capacity fade) in 18650 cells with at least twice improvement in the specific capacity than that of conventional graphite electrodes; At the end of project period: Deliver 18650 cells containing proposed anode materials, and achieve specific capacities greater than 1200 mAh/g and cycle life longer than 5000 cycles of ~70% state of charge swing with less than 20% capacity fade.

  12. Anode Interactions with Coal Gas Contaminants

    Energy Technology Data Exchange (ETDEWEB)

    Marina, Olga A.; Coffey, Greg W.; Coyle, Christopher A.; Nguyen, Carolyn D.; Thomsen, Edwin C.; Pederson, Larry R.

    2008-08-13

    This report describes efforts to characterize the interactions nickel anodes with phosphorus in coal gas using three different button cell configurations to emphasize particular degradation modes. Important parameters addressed included contaminant concentration, temperature, reaction time, fuel utilization, and current density. In addition, coupon tests in flow-through and flow-by arrangements were conducted to complement cell tests. The studies have involved extensive electrochemical testing using both dc and ac methods. Post-test analyses to determine the composition and extent of nickel modification are particularly important to understanding reactions that have occurred. This report also provides a thermodynamic assessment of contaminant reactions with nickel in a coal gas environment with regard to alteration phase formation. Contaminants addressed were phosphorus, arsenic, sulfur, selenium, and antimony. Phosphorus was found to interact strongly with nickel and result in extensive alteration phase formation, consistent with expectations based on thermodynamic properties. Even in button cell tests where the fuel utilization was low, phosphorus was found to be nearly completely captured by the nickel anode. For anode-supported cells, an important degradation mode involved loss of electronic percolation, the result of nickel phosphide formation, grain growth, and inducement of micro-fractures within the anode support. Even with excessive anode support conversion, electrochemical degradation rates were often very low. This is attributed to a “shadowing effect,” whereby a dense structure such as current leads prevent phosphorus from reacting with the nickel directly underneath. This effect maintains an electrical pathway to the active interface, and allows the cell to operate with minimal degradation until the anode is essentially completely consumed. In a planar stack, ribs on the interconnect plate would be expected to provide this conductive pathway in the

  13. The Role of Anode Manufacturing Processes in Net Carbon Consumption

    Directory of Open Access Journals (Sweden)

    Khalil Khaji

    2016-05-01

    Full Text Available Carbon anodes are consumed in electrolysis cells during aluminum production. Carbon consumption in pre-bake anode cells is 400–450 kg C/t Al, considerably higher than the theoretical consumption of 334 kg C/t Al. This excess carbon consumption is partly due to the anode manufacturing processes. Net carbon consumption over the last three years at Emirates Aluminium (EMAL, also known as Emirates Global Aluminium (EGA Al Taweelah was analyzed with respect to anode manufacturing processes/parameters. The analysis indicates a relationship between net carbon consumption and many manufacturing processes, including anode desulfurization during anode baking. Anode desulfurization appears to increase the reaction surface area, thereby helping the Boudouard reaction between carbon and carbon dioxide in the electrolysis zone, as well as reducing the presence of sulfur which could inhibit this reaction. This paper presents correlations noted between anode manufacturing parameters and baked anode properties, and their impact on the net carbon consumption in electrolytic pots. Anode reactivities affect the carbon consumption in the pots during the electrolysis of alumina. Pitch content in anodes, impurities in anodes, and anode desulfurization during baking were studied to find their influence on anode reactivities. The understanding gained through this analysis helped reduce net carbon consumption by adjusting manufacturing processes. For an aluminum smelter producing one million tonnes of aluminum per year, the annual savings could be as much as US $0.45 million for every kg reduction in net carbon consumption.

  14. Anodized Ti3SiC2 As an Anode Material for Li-ion Microbatteries.

    Science.gov (United States)

    Tesfaye, Alexander T; Mashtalir, Olha; Naguib, Michael; Barsoum, Michel W; Gogotsi, Yury; Djenizian, Thierry

    2016-07-06

    We report on the synthesis of an anode material for Li-ion batteries by anodization of a common MAX phase, Ti3SiC2, in an aqueous electrolyte containing hydrofluoric acid (HF). The anodization led to the formation of a porous film containing anatase, a small quantity of free carbon, and silica. By varying the anodization parameters, various oxide morphologies were produced. The highest areal capacity was achieved by anodization at 60 V in an aqueous electrolyte containing 0.1 v/v HF for 3 h at room temperature. After 140 cycles performed at multiple applied current densities, an areal capacity of 380 μAh·cm(-2) (200 μA·cm(-2)) has been obtained, making this new material, free of additives and binders, a promising candidate as a negative electrode for Li-ion microbatteries.

  15. Mobilizing Government

    DEFF Research Database (Denmark)

    Wang, Cancan; Medaglia, Rony; Jensen, Tina Blegind

    2016-01-01

    The nature of inter-organizational collaboration between government and other stakeholders is rapidly changing with the introduction of open social media (OSM) platforms. Characterized by a high degree of informality as well as a blurred personal/professional nature, OSM can potentially introduce...... in China. Drawing on the framework of the theory of temporary organizations, we analyze data from interviews and participant observations to single out the characteristics of inter-organizational collaboration afforded by OSM. The findings outline the features of collaboration practices afforded by OSM...... changes and tensions in the well-established routines of the public sector. This paper aims at shedding light on such changes, presenting findings from a study on the use of an OSM platform, WeChat, in an interorganizational collaboration project between government, university, and industry stakeholders...

  16. Plural Governance

    DEFF Research Database (Denmark)

    Mols, Niels Peter; Hansen, Jesper Rosenberg; Villadsen, Anders Ryom

    We suggest that both making and buying the same product or service has several effects on market performance. A model is developed and tested by use of 170 answers gathered from the Danish municipalities. The results support the hypotheses that both making and buying: (1) moderates the negative r...... on how the plurality is measured. The results indicate that internal production may facilitate effective governance of the relationships with suppliers. Implications for research on firm boundaries and for practice are also discussed....

  17. School governance

    OpenAIRE

    Monique Turkenburg

    2008-01-01

    Original title: De school bestuurd. Until now, little was known about school boards in primary and secondary schools. This study presents a national overview of the way in which these school boards interpret and fulfil their role. More and different demands have been placed on school boards in recent years, for example with regard to transparency of governance and public accountability. In a national survey of school boards, the Netherlands Institute for Social Research/SCP explored what they...

  18. Porous and mesh alumina formed by anodization of high purity aluminum films at low anodizing voltage

    Energy Technology Data Exchange (ETDEWEB)

    Abd-Elnaiem, Alaa M., E-mail: alaa.abd-elnaiem@science.au.edu.eg [KACST-Intel Consortium Center of Excellence in Nano-manufacturing Applications (CENA), Riyadh (Saudi Arabia); Physics Department, Faculty of Science, Assiut University, Assiut 71516 (Egypt); Mebed, A.M. [Physics Department, Faculty of Science, Assiut University, Assiut 71516 (Egypt); Department of Physics, Faculty of Science, Al-Jouf University, Sakaka 2014 (Saudi Arabia); El-Said, Waleed Ahmed [Department of Chemistry, Faculty of Science, Assiut University, Assiut 71516 (Egypt); Abdel-Rahim, M.A. [Physics Department, Faculty of Science, Assiut University, Assiut 71516 (Egypt)

    2014-11-03

    Electrochemical oxidation of high-purity aluminum (Al) films under low anodizing voltages (1–10) V has been conducted to obtain anodic aluminum oxide (AAO) with ultra-small pore size and inter-pore distance. Different structures of AAO have been obtained e.g. nanoporous and mesh structures. Highly regular pore arrays with small pore size and inter-pore distance have been formed in oxalic or sulfuric acids at different temperatures (22–50 °C). It is found that the pore diameter, inter-pore distance and the barrier layer thickness are independent of the anodizing parameters, which is very different from the rules of general AAO fabrication. The brand formation mechanism has been revealed by the scanning electron microscope study. Regular nanopores are formed under 10 V at the beginning of the anodization and then serve as a template layer dominating the formation of ultra-small nanopores. Anodization that is performed at voltages less than 5 V leads to mesh structured alumina. In addition, we have introduced a simple one-pot synthesis method to develop thin walls of oxide containing lithium (Li) ions that could be used for battery application based on anodization of Al films in a supersaturated mixture of lithium phosphate and phosphoric acid as matrix for Li-composite electrolyte. - Highlights: • We develop anodic aluminum oxide (AAO) with small pore size and inter-pore distance. • Applying low anodizing voltages onto aluminum film leads to form mesh structures. • The value of anodizing voltage (1–10 V) has no effect on pore size or inter-pore distance. • Applying anodizing voltage less than 5 V leads to mesh structured AAO. • AAO can be used as a matrix for Li-composite electrolytes.

  19. Electrolytic Cell For Production Of Aluminum Employing Planar Anodes.

    Energy Technology Data Exchange (ETDEWEB)

    Barnett, Robert J. (Goldendale, WA); Mezner, Michael B. (Sandy, OR); Bradford, Donald R (Underwood, WA)

    2004-10-05

    A method of producing aluminum in an electrolytic cell containing alumina dissolved in an electrolyte, the method comprising providing a molten salt electrolyte having alumina dissolved therein in an electrolytic cell. A plurality of anodes and cathodes having planar surfaces are disposed in a generally vertical orientation in the electrolyte, the anodes and cathodes arranged in alternating or interleaving relationship to provide anode planar surfaces disposed opposite cathode planar surfaces, the anode comprised of carbon. Electric current is passed through anodes and through the electrolyte to the cathodes depositing aluminum at the cathodes and forming carbon containing gas at the anodes.

  20. Anode materials for lithium-ion batteries

    Science.gov (United States)

    Manthiram, Arumugam; Applestone, Danielle; Yoon, Sukeun

    2017-03-21

    The current disclosure relates to an anode material with the general formula M.sub.ySb-M'O.sub.x--C, where M and M' are metals and M'O.sub.x--C forms a matrix containing M.sub.ySb. It also relates to an anode material with the general formula M.sub.ySn-M'C.sub.x--C, where M and M' are metals and M'C.sub.x--C forms a matrix containing M.sub.ySn. It further relates to an anode material with the general formula Mo.sub.3Sb.sub.7--C, where --C forms a matrix containing Mo.sub.3Sb.sub.7. The disclosure also relates to an anode material with the general formula M.sub.ySb-M'C.sub.x--C, where M and M' are metals and M'C.sub.x--C forms a matrix containing M.sub.ySb. Other embodiments of this disclosure relate to anodes or rechargeable batteries containing these materials as well as methods of making these materials using ball-milling techniques and furnace heating.

  1. Nanocomposite protective coatings for battery anodes

    Science.gov (United States)

    Lemmon, John P; Xiao, Jie; Liu, Jun

    2014-01-21

    Modified surfaces on metal anodes for batteries can help resist formation of malfunction-inducing surface defects. The modification can include application of a protective nanocomposite coating that can inhibit formation of surface defects. such as dendrites, on the anode during charge/discharge cycles. For example, for anodes having a metal (M'), the protective coating can be characterized by products of chemical or electrochemical dissociation of a nanocomposite containing a polymer and an exfoliated compound (M.sub.a'M.sub.b''X.sub.c). The metal, M', comprises Li, Na, or Zn. The exfoliated compound comprises M' among lamella of M.sub.b''X.sub.c, wherein M'' is Fe, Mo, Ta, W, or V, and X is S, O, or Se.

  2. An Insoluble Titanium-Lead Anode for Sulfate Electrolytes

    Energy Technology Data Exchange (ETDEWEB)

    Ferdman, Alla

    2005-05-11

    The project is devoted to the development of novel insoluble anodes for copper electrowinning and electrolytic manganese dioxide (EMD) production. The anodes are made of titanium-lead composite material produced by techniques of powder metallurgy, compaction of titanium powder, sintering and subsequent lead infiltration. The titanium-lead anode combines beneficial electrochemical behavior of a lead anode with high mechanical properties and corrosion resistance of a titanium anode. In the titanium-lead anode, the titanium stabilizes the lead, preventing it from spalling, and the lead sheathes the titanium, protecting it from passivation. Interconnections between manufacturing process, structure, composition and properties of the titanium-lead composite material were investigated. The material containing 20-30 vol.% of lead had optimal combination of mechanical and electrochemical properties. Optimal process parameters to manufacture the anodes were identified. Prototypes having optimized composition and structure were produced for testing in operating conditions of copper electrowinning and EMD production. Bench-scale, mini-pilot scale and pilot scale tests were performed. The test anodes were of both a plate design and a flow-through cylindrical design. The cylindrical anodes were composed of cylinders containing titanium inner rods and fitting over titanium-lead bushings. The cylindrical design allows the electrolyte to flow through the anode, which enhances diffusion of the electrolyte reactants. The cylindrical anodes demonstrate higher mass transport capabilities and increased electrical efficiency compared to the plate anodes. Copper electrowinning represents the primary target market for the titanium-lead anode. A full-size cylindrical anode performance in copper electrowinning conditions was monitored over a year. The test anode to cathode voltage was stable in the 1.8 to 2.0 volt range. Copper cathode morphology was very smooth and uniform. There was no

  3. Anodizing color coded anodized Ti6Al4V medical devices for increasing bone cell functions

    Science.gov (United States)

    Ross, Alexandra P; Webster, Thomas J

    2013-01-01

    Current titanium-based implants are often anodized in sulfuric acid (H2SO4) for color coding purposes. However, a crucial parameter in selecting the material for an orthopedic implant is the degree to which it will integrate into the surrounding bone. Loosening at the bone–implant interface can cause catastrophic failure when motion occurs between the implant and the surrounding bone. Recently, a different anodization process using hydrofluoric acid has been shown to increase bone growth on commercially pure titanium and titanium alloys through the creation of nanotubes. The objective of this study was to compare, for the first time, the influence of anodizing a titanium alloy medical device in sulfuric acid for color coding purposes, as is done in the orthopedic implant industry, followed by anodizing the device in hydrofluoric acid to implement nanotubes. Specifically, Ti6Al4V model implant samples were anodized first with sulfuric acid to create color-coding features, and then with hydrofluoric acid to implement surface features to enhance osteoblast functions. The material surfaces were characterized by visual inspection, scanning electron microscopy, contact angle measurements, and energy dispersive spectroscopy. Human osteoblasts were seeded onto the samples for a series of time points and were measured for adhesion and proliferation. After 1 and 2 weeks, the levels of alkaline phosphatase activity and calcium deposition were measured to assess the long-term differentiation of osteoblasts into the calcium depositing cells. The results showed that anodizing in hydrofluoric acid after anodizing in sulfuric acid partially retains color coding and creates unique surface features to increase osteoblast adhesion, proliferation, alkaline phosphatase activity, and calcium deposition. In this manner, this study provides a viable method to anodize an already color coded, anodized titanium alloy to potentially increase bone growth for numerous implant applications

  4. Silicon Whisker and Carbon Nanofiber Composite Anode

    Science.gov (United States)

    Lang, Christopher M.

    2015-01-01

    Phase II Objectives: Demonstrate production levels of grams per batch; Achieve full cell anode capacity of greater than 1,000 mAh/g at a charge rate of 10 (C/10) and 0 degree C; Establish a full cell cycle life of over 300 cycles; Display an operating temperature of negative 30 degrees C to plus 30 degrees C; Demonstrate a rate capability of C/5 or higher; Deliver to NASA three 2.5 Ah cells (energy density greater than 220 Wh/kg); Exhibit the safety features of the anode and full cells; Design a 1 kWh prismatic battery pack.

  5. A 200 W Hall thruster with hollow indented anode

    Science.gov (United States)

    Ding, Yongjie; Sun, Hezhi; Wei, Liqiu; Li, Peng; Su, Hongbo; Peng, Wuji; Yu, Daren

    2017-10-01

    A hollow indented anode is proposed for increasing the neutral gas density in a discharge channel, in order to improve the performance of the thruster. The experimental results show that a hollow indented anode structure can effectively improve the performance, compared to a hollow straight anode under similar operating conditions, in terms of thrust, propellant utilization, ionization rate, and anode efficiency. Furthermore, simulations show that the indented anode can effectively increase the neutral gas density in a discharge channel and on the centerline of the channel, compared to a hollow straight anode. In addition, it can increase the ionization rate in the channel and the pre-ionization in the anode. Therefore, the hollow indented anode could be considered as an important design idea for improving thruster performance.

  6. Silicon Whisker and Carbon Nanofiber Composite Anode Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Physical Sciences Inc. (PSI) proposes to develop a silicon whisker and carbon nanofiber composite anode for lithium ion batteries on a Phase I program. This anode...

  7. Silicon-Based Anode and Method for Manufacturing the Same

    Science.gov (United States)

    Yushin, Gleb Nikolayevich (Inventor); Luzinov, Igor (Inventor); Zdyrko, Bogdan (Inventor); Magasinski, Alexandre (Inventor)

    2017-01-01

    A silicon-based anode comprising silicon, a carbon coating that coats the surface of the silicon, a polyvinyl acid that binds to at least a portion of the silicon, and vinylene carbonate that seals the interface between the silicon and the polyvinyl acid. Because of its properties, polyvinyl acid binders offer improved anode stability, tunable properties, and many other attractive attributes for silicon-based anodes, which enable the anode to withstand silicon cycles of expansion and contraction during charging and discharging.

  8. Governing Warfare

    DEFF Research Database (Denmark)

    Harste, Gorm

    its origins in a - some say 1st - generation of warfare, where armies were concentrated and could be controlled by political masters who were also acclaimed as warfare "geniuses". With subsequent generations of warfare, however, the control of war cannot be replaced by a control of military...... administration. While organisation systems continue to make some kind of political control possible, this is not the case in relation to wars. The organisation system is the in-between that should mediatise politics and war but is not functionally equivalent to just and unjust wars. The paper investigates...... the risks of lacking unity and displays the organisational trap to the fatal political myth of controlled warfare: Does it come from the military organisation system itself, from political ideologies of goal-rational governance, or from the chameleonic logic of wars?  ...

  9. Governing Engineering

    DEFF Research Database (Denmark)

    Buch, Anders

    2011-01-01

    Abstract: Most people agree that our world faces daunting problems and, correctly or not, technological solutions are seen as an integral part of an overall solution. But what exactly are the problems and how does the engineering ‘mind set’ frame these problems? This chapter sets out to unravel...... dominant perspectives in challenge perception in engineering in the US and Denmark. Challenge perception and response strategies are closely linked through discursive practices. Challenge perceptions within the engineering community and the surrounding society are thus critical for the shaping...... of engineering education and the engineering profession. Through an analysis of influential reports and position papers on engineering and engineering education the chapter sets out to identify how engineering is problematized and eventually governed. Drawing on insights from governmentality studies the chapter...

  10. Governing Engineering

    DEFF Research Database (Denmark)

    Buch, Anders

    2012-01-01

    Most people agree that our world face daunting problems and, correctly or not, technological solutions are seen as an integral part of an overall solution. But what exactly are the problems and how does the engineering ‘mind set’ frame these problems? This chapter sets out to unravel dominant...... perspectives in challenge per-ception in engineering in the US and Denmark. Challenge perception and response strategies are closely linked through discursive practices. Challenge perceptions within the engineering community and the surrounding society are thus critical for the shaping of engineering education...... and the engineering profession. Through an analysis of influential reports and position papers on engineering and engineering education the chapter sets out to identify how engineering is problematized and eventually governed. Drawing on insights from governmentality studies the chapter strives to elicit the bodies...

  11. Internet Governance

    Directory of Open Access Journals (Sweden)

    Pedro Veiga

    2010-01-01

    Full Text Available It has now become quite obvious that the Internet has brought significant changes to our society and a break on how we lived before its emergence. It is still too early to assess the impact on society of the new services at our disposal, such as the capacity to communicate faster and cheaper on a global scale, access information and, perhaps more importantly, to produce and disseminate information in a way that is accessible to all.It is clear that the advent of the Information Society implies changes in our society that constitute a point of no return. However, contrary to what happened when we entered the Industrial Age about three centuries ago, when the changing process was slow and led by older individuals, these days the entrance into the Information Society is taking place rapidly and the decisive players are younger people. The global nature of the Internet, the possibility of producing and distributing any type of content in digital form at almost zero cost, as well as the vast number of people who use the web, have highlighted the need for new forms of intervention in a sector where there are many types of players. It is in this context that the problem of Internet Governance becomes a very current issue, inasmuch as one feels the need to guarantee a diversity of rights and duties, which may appear difficult to reconcile.This paper presents a brief overview of the main players and initiatives which, in the field of Internet Governance, have tried to contribute to turning this network into a factor for social development and democraticity on a global scale.

  12. Anodization of Aluminium using a fast two-step process

    Indian Academy of Sciences (India)

    Al strip connected to the anode of DC power supply was inserted. Anodization was carried out for 10 min at a constant voltage of 40 V. Then the sample was rinsed .... (Pt) and Silicon (Si) originated from the electrode and the substrate used when anodization was carried out. The sample showed traces of Pt and Si on the ...

  13. Effect of anodization on corrosion behaviour and biocompatibility of ...

    Indian Academy of Sciences (India)

    ... is developed on the surface of Cp-Ti through electrochemical anodization in the electrolyte of aqueous solution of 0.5% HF at 15 V for 30 min at 24 °C. The nano-porous feature of the anodized surface is characterized by field-emission scanning electron microscope (FESEM). Pores of some anodized samples are sealed ...

  14. Hollow Anode Cascading Plasma Focus | Alabraba | Journal of the ...

    African Journals Online (AJOL)

    Journal of the Nigerian Association of Mathematical Physics ... Using the 3-phase model for each focus event, the 9-phase, two solid disc auxiliary anode cascading plasma focus has been extended to include holes at the center of each cascade anode (hereafter referred to as hollow anode cascading focus) with a view of ...

  15. Effect of Anodic Polarization on Layer-Growth of Fe-Ni-Cr Anodes in Cryolite-Alumina Melts

    Science.gov (United States)

    Ndong, GermainKouma; Xue, Jilai; Feng, Luxing; Zhu, Jun

    High-temperature corrosion behaviors of Fe-Ni-Cr alloy as inert anodes for aluminum electrolysis have been studied. The effect of anodic overpotential on layer growth of anodic surface is specially considered. The corrosion layers on the anodes tested were analyzed using XRD and SEM-EDS to provide a fundamental understanding of the layers growth at metallic anode surface. The dissolution of the scale layers on the metal anode occurred with low overpotential, while AlxM3-xO4 spinel phase within the scale layers was found with an increased overpotential. A mixture of multiple MyO layers existed on the anode substrate. The results may be useful for understanding and controlling the corrosion behaviors of Fe-Ni-Cr anode for potential application in aluminum electrolysis.

  16. Effect of TiO2 Addition on Grain Growth, Anodic Bubble Evolution and Anodic Overvoltage of NiFe2O4-Based Composite Inert Anodes

    Science.gov (United States)

    Wang, Bin; Du, Jinjing; Liu, Yihan; Fang, Zhao; Hu, Ping

    2017-11-01

    A two-step powder compaction and sintering process was employed to fabricate TiO2-doped NiFe2O4 ceramic-based inert anodes. Grain growth during isothermal sintering was analyzed using Brook grain growth model. The bubble behavior of NiFe2O4 ceramic-based inert anodes was investigated in a two-compartment see-through quartz cell for aluminum electrolysis process. Anodic overvoltage and potential decay curves of the inert anodes were measured by using the steady state and current interruption technique. The results showed that the kinetic index of grain growth decreased with an increase in temperature. The average activation energy of grain growth for 1.0 wt.% TiO2-doped NiFe2O4 ceramic samples with a sintering temperature range from 1373 to 1673 K dropped from 675.30 to 183.47 kJ/mol. The diameter size of bubbles before releasing from the bottom surface of the anodes was reduced with increasing the current density, and the larger average releasing bubble size for carbon anode at the same current density could be obtained, which was compared to the NiFe2O4 inert anodes. Besides, the cell voltage of carbon anodes fluctuated much more violently under the same experimental conditions. After adding small amount of TiO2, a minor reduction in anodic overvoltage of NiFe2O4-based anodes can be observed.

  17. Linear sweep anodic stripping voltammetry: Determination of ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 127; Issue 6. Linear sweep anodic stripping voltammetry: Determination of Chromium (VI) using synthesized gold nanoparticles modified screen-printed electrode. Salamatu Aliyu Tukur Nor Azah Yusof Reza Hajian. Regular Articles Volume 127 Issue 6 June 2015 pp ...

  18. Anodic Stripping Voltammetry: An Instrumental Analysis Experiment.

    Science.gov (United States)

    Wang, Joseph

    1983-01-01

    Describes an experiment designed to acquaint students with the theory and applications of anodic stripping voltammetry (ASV) as well as such ASV problems as contamination associated with trace analysis. The experimental procedure, instrumentation, and materials discussed are designed to minimize cost and keep procedures as simple as possible. (JM)

  19. Silicon Whisker and Carbon Nanofiber Composite Anode

    Science.gov (United States)

    Ma, Junqing (Inventor); Newman, Aron (Inventor); Lennhoff, John (Inventor)

    2015-01-01

    A carbon nanofiber can have a surface and include at least one crystalline whisker extending from the surface of the carbon nanofiber. A battery anode composition can be formed from a plurality of carbon nanofibers each including a plurality of crystalline whiskers.

  20. Low temperature anodic bonding to silicon nitride

    DEFF Research Database (Denmark)

    Weichel, Steen; Reus, Roger De; Bouaidat, Salim

    2000-01-01

    Low-temperature anodic bonding to stoichiometric silicon nitride surfaces has been performed in the temperature range from 3508C to 4008C. It is shown that the bonding is improved considerably if the nitride surfaces are either oxidized or exposed to an oxygen plasma prior to the bonding. Both bulk...

  1. Characterization of nanopores ordering in anodic alumina

    DEFF Research Database (Denmark)

    Mátéfi-Tempfli, Stefan; Mátéfi-Tempfli, M.; Piraux, L.

    2008-01-01

    A simple characterization method of the ordering of the nanopores is described for nanoporous anodized aluminium oxides. The method starts with image analysis on scanning electron microscopy representations for the purpose to find repetitive shapes and their centres, i.e. nanopores. Then triangle...

  2. An investigation into the effect of anode purging on the fuel cell performance

    Energy Technology Data Exchange (ETDEWEB)

    Mokmeli, Ali; Asghari, Saeed [Isfahan Engineering Research Center, 7th kilometer of Imam Khomeini St., Isfahan (Iran)

    2010-09-15

    The anode purge is a crucial process for the fuel cell long time operation because when the hydrogen is supplied in a circulation mode, any impurities present in hydrogen will gradually accumulate which lead to output voltage loss. A mathematical model is proposed for the purge process based on some operational purge parameters. The governing equations are solved and the effect of purge process on the stack working parameters is analyzed. Purge operational parameters are determined in such a way that the minimum pressure fluctuations in the anode compartment and a compromise between the minimum voltage loss and minimum hydrogen waste are achieved. A semi-stable condition is introduced and indicated that the behavior of voltage loss and hydrogen waste at this condition with respect to purge stop time (duration which the purge valve is closed) is semi-logarithmic. (author)

  3. Fuel cell anode configuration for CO tolerance

    Science.gov (United States)

    Uribe, Francisco A.; Zawodzinski, Thomas A.

    2004-11-16

    A polymer electrolyte fuel cell (PEFC) is designed to operate on a reformate fuel stream containing oxygen and diluted hydrogen fuel with CO impurities. A polymer electrolyte membrane has an electrocatalytic surface formed from an electrocatalyst mixed with the polymer and bonded on an anode side of the membrane. An anode backing is formed of a porous electrically conductive material and has a first surface abutting the electrocatalytic surface and a second surface facing away from the membrane. The second surface has an oxidation catalyst layer effective to catalyze the oxidation of CO by oxygen present in the fuel stream where at least the layer of oxidation catalyst is formed of a non-precious metal oxidation catalyst selected from the group consisting of Cu, Fe, Co, Tb, W, Mo, Sn, and oxides thereof, and other metals having at least two low oxidation states.

  4. Transparent Aluminum Oxide Films by Edge Anodization

    Science.gov (United States)

    Stott, Jonathan; Greenwood, Thomas; Winn, David

    In this paper we present our recent work on manufacturing thin (3 - 5 μm) films of porous aluminum(III) oxide [PAO] using a novel edge-anodization technique. With this modified anodization process, we are able to create transparent PAO films on top of insulating substrates such as glass or plastic. By controlling the processing parameters, the index of refraction of PAO films can be engineered to match the substrate, which gives us a durable reflection-free and scratch-resistant coating over conventional optics or LCD displays. Eventually we hope to create ordered porous aluminum oxide cladding around an optical fiber core, which could have a number of interesting optical properties if the pore spacing can be matched to the wavelength of light in the fiber. This work was funded by Fairfield University startup funding.

  5. Local potential evolutions during proton exchange membrane fuel cell operation with dead-ended anode - Part I: Impact of water diffusion and nitrogen crossover

    Science.gov (United States)

    Abbou, S.; Dillet, J.; Maranzana, G.; Didierjean, S.; Lottin, O.

    2017-02-01

    Operating a PEMFC with a dead-ended anode may lead to local fuel-starvation because of water and possibly nitrogen accumulation in the anode compartment. In previous works, we used a segmented linear cell with reference electrodes to monitor simultaneously the local potentials and current densities during dead-ended anode operation. The results indicated that water transport as well as nitrogen crossover through the membrane were most probably the two key factors governing fuel starvation. In this first from a set of two papers, we evaluated with more details the contributions of nitrogen crossover and water transport to hydrogen starvation. To assess nitrogen contribution, the fuel cell cathode compartment was first supplied with pure oxygen instead of air. The results showed that in the absence of nitrogen (in the cathode side) the fuel starvation was much slower than with air, suggesting that nitrogen contribution cannot be neglected. On the other hand, the contribution of water flooding to hydrogen starvation was investigated by using different cooling temperature on the cathode and anode sides in order to drive water toward the colder plate. The results showed that with a colder anode side, fuel starvation was faster. In the opposite case of a hotter anode plate, water accumulation in the anode compartment was limited, nitrogen crossover through the membrane was the main reason for hydrogen starvation in this case. To fully assess the impact of the thermal configurations on membrane-electrode assembly (MEA) degradation, aging protocols with a dead-ended anode and a fixed closing time were also performed. The results showed that operation with a hotter anode could help to limit significantly cathode ElectroChemical Surface Area (ECSA) losses along the cell area and performance degradation induced by hydrogen starvation.

  6. Investigation of mechanism of anode plasma formation in ion diode with dielectric anode

    Science.gov (United States)

    Pushkarev, A.

    2015-10-01

    The results of investigation of the anode plasma formation in a diode with a passive anode in magnetic insulation mode are presented. The experiments have been conducted using the BIPPAB-450 ion accelerator (350-400 kV, 6-8 kA, 80 ns) with a focusing conical diode with Br external magnetic field (a barrel diode). For analysis of plasma formation at the anode and the distribution of the ions beam energy density, infrared imaging diagnostics (spatial resolution of 1-2 mm) is used. For analysis of the ion beam composition, time-of-flight diagnostics (temporal resolution of 1 ns) were used. Our studies have shown that when the magnetic induction in the A-C gap is much larger than the critical value, the ion beam energy density is close to the one-dimensional Child-Langmuir limit on the entire working surface of the diode. Formation of anode plasma takes place only by the flashover of the dielectric anode surface. In this mode, the ion beam consists primarily of singly ionized carbon ions, and the delay of the start of formation of the anode plasma is 10-15 ns. By reducing the magnetic induction in the A-C gap to a value close to the critical one, the ion beam energy density is 3-6 times higher than that calculated by the one-dimensional Child-Langmuir limit, but the energy density of the ion beam is non-uniform in cross-section. In this mode, the anode plasma formation occurs due to ionization of the anode material with accelerated electrons. In this mode, also, the delay in the start of the formation of the anode plasma is much smaller and the degree of ionization of carbon ions is higher. In all modes occurred effective suppression of the electronic component of the total current, and the diode impedance was 20-30 times higher than the values calculated for the mode without magnetic insulation of the electrons. The divergence of the ion beam was 4.5°-6°.

  7. Spinal Anodes for Lithium-Ion Batteries

    CSIR Research Space (South Africa)

    Ferg, E

    1994-11-01

    Full Text Available Anodes of Li4Mn5O12, Li4Ti5O12, and Li2Mn4O9 with a spinel-type structure have been evaluated in room-temperature lithium cells. The cathodes that were selected for this study were the stabilized spinels, Li1.03Mn1.97O4 and LiZn0.025Mn1.95O4...

  8. High performance anode for advanced Li batteries

    Energy Technology Data Exchange (ETDEWEB)

    Lake, Carla [Applied Sciences, Inc., Cedarville, OH (United States)

    2015-11-02

    The overall objective of this Phase I SBIR effort was to advance the manufacturing technology for ASI’s Si-CNF high-performance anode by creating a framework for large volume production and utilization of low-cost Si-coated carbon nanofibers (Si-CNF) for the battery industry. This project explores the use of nano-structured silicon which is deposited on a nano-scale carbon filament to achieve the benefits of high cycle life and high charge capacity without the consequent fading of, or failure in the capacity resulting from stress-induced fracturing of the Si particles and de-coupling from the electrode. ASI’s patented coating process distinguishes itself from others, in that it is highly reproducible, readily scalable and results in a Si-CNF composite structure containing 25-30% silicon, with a compositionally graded interface at the Si-CNF interface that significantly improve cycling stability and enhances adhesion of silicon to the carbon fiber support. In Phase I, the team demonstrated the production of the Si-CNF anode material can successfully be transitioned from a static bench-scale reactor into a fluidized bed reactor. In addition, ASI made significant progress in the development of low cost, quick testing methods which can be performed on silicon coated CNFs as a means of quality control. To date, weight change, density, and cycling performance were the key metrics used to validate the high performance anode material. Under this effort, ASI made strides to establish a quality control protocol for the large volume production of Si-CNFs and has identified several key technical thrusts for future work. Using the results of this Phase I effort as a foundation, ASI has defined a path forward to commercialize and deliver high volume and low-cost production of SI-CNF material for anodes in Li-ion batteries.

  9. Sulfur-tolerant anode materials: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Remick, R. J.; Osif, T. L.; Lawson, M. G.

    1988-09-01

    Results of the second year's technical effort on a program to identify and evaluate alternative anode materials for use in molten carbonate fuel cells (MCFC) operating with high levels of sulfur contaminants in the fuel are summarized. In the first year of this program, a literature survey was performed covering all materials development research relating to electrode development for molten carbonate fuel cells. A final selection of 15 candidate materials was made, and samples of 9 of these 15 materials were fabricated and tested for electrical conductivity and for stability in the molten electrolyte. An additional 5 materials were evaluated during the second year. Several water-gas shift catalysts were also evaluated for their catalytic activity and sulfur resistance under conditions prevailing in the MCFC anode. These materials were titanium carbide, cobalt metal, copper metal, copper-nickel alloy, and lithium ferrate (III). Only the lithium ferrate (III) exhibited sulfur tolerance in that the performance of the lithium ferrate (III) cell did not change when sulfur was added to the fuel. The lithium ferrate (III) was then used to fabricate anodes for two 100 cm/sup 2/ bench-scale cells. These cells were assembled and operated on a medium-Btu simulated coal gasifier-derived fuel. Results are discussed.

  10. Operational results of pilot cell test with cermet ``inert`` anodes

    Energy Technology Data Exchange (ETDEWEB)

    Alcorn, T.R.; Tabereaux, A.T.; Richards, N.E. [Reynolds Metals Co., Muscle Shoals, AL (United States). Mfg. Technology Lab.; Windisch, C.F. Jr.; Strachan, D.M. [Pacific Northwest Lab., Richland, WA (United States); Gregg, J.S.; Frederick, M.S. [ELTECH Research Corp., Fairport Harbor, OH (United States)

    1993-02-01

    The operational performance of a ``six-pack`` of cermet anodes and corrosion rates was evaluated in a six kA pilot reduction cell at Reynolds` Manufacturing Technology Laboratory. Two separate test periodswere conducted with the cermet anodes; the first period was in conjunction with the Pacific Northwest Laboratory and the second with ELTECH Research Corporation. Both tests used identical NiO-NiFe{sub 2}O{sub 4}-Cu anodes manufactured by Ceramic Magnetics, Inc.. The ELTECH testing involved the in situ coating of the anodes with cerium oxide. Primary evaluations for both test periods were conducted at target conditions of alumina saturation and 0.5 amp/cm{sup 2} anode current density. Individual anodes remained in operation for 25 days during the two and one-half month testing period. Operational difficulties developed throughout the test due to breakage of the anode conductor stems, cracking and breaking of the cermet anodes, unequal anode current distribution, and alumina muck build-up in the cell. These operational problems are discussed as well as an estimate of anode corrosion rates based on metal impurity levels in the aluminum metal pad.

  11. Anode Supported Solid Oxide Fuel Cells - Deconvolution of Degradation into Cathode and Anode Contributions

    DEFF Research Database (Denmark)

    Hagen, Anke; Liu, Yi-Lin; Barfod, Rasmus

    2007-01-01

    The degradation of anode supported cells was studied over 1500 h as function of cell polarization either in air or oxygen on the cathode. Based on impedance analysis, contributions of anode and cathode to the increase of total resistance were assigned. Accordingly, the degradation rates...... of the cathode were strongly dependent on the pO(2); they were significantly smaller when testing in oxygen compared to air. Microstructural analysis of the cathode/electrolyte interface of a not-tested reference cell carried out after removal of the cathode showed sharp craters on the electrolyte surface where...... the LSM particles had been located. After testing in air, these craters flattened out and decreased in size, indicating the decrease of three phase boundary length. In contrast, they remained almost unchanged after testing in oxygen giving an explanation for the observed smaller - mainly anode related...

  12. Redox Stable Anodes for Solid Oxide Fuel Cells

    Directory of Open Access Journals (Sweden)

    Guoliang eXiao

    2014-06-01

    Full Text Available Solid oxide fuel cells (SOFCs can convert chemical energy from the fuel directly to electrical energy with high efficiency and fuel flexibility. Ni-based cermets have been the most widely adopted anode for SOFCs. However, the conventional Ni-based anode has low tolerance to sulfur-contamination, is vulnerable to deactivation by carbon build-up (coking from direct oxidation of hydrocarbon fuels, and suffers volume instability upon redox cycling. Among these limitations, the redox instability of the anode is particularly important and has been intensively studied since the SOFC anode may experience redox cycling during fuel cell operations even with the ideal pure hydrogen as the fuel. This review aims to highlight recent progresses on improving redox stability of the conventional Ni-based anode through microstructure optimization and exploration of alternative ceramic-based anode materials.

  13. Fundamental Investigation of Si Anode in Li-Ion Cells

    Science.gov (United States)

    Wu, James J.; Bennett, William R.

    2012-01-01

    Silicon is a promising and attractive anode material to replace graphite for high capacity lithium ion cells since its theoretical capacity is approximately 10 times of graphite and it is an abundant element on earth. However, there are challenges associated with using silicon as Li-ion anode due to the significant first cycle irreversible capacity loss and subsequent rapid capacity fade during cycling. In this paper, cyclic voltammetry and electrochemical impedance spectroscopy are used to build a fundamental understanding of silicon anodes. The results show that it is difficult to form the SEI film on the surface of Si anode during the first cycle, the lithium ion insertion and de-insertion kinetics for Si are sluggish, and the cell internal resistance changes with the state of lithiation after electrochemical cycling. These results are compared with those for extensively studied graphite anodes. The understanding gained from this study will help to design better Si anodes.

  14. Battery, especially for portable devices, has an anode containing silicon

    OpenAIRE

    Kan, S.Y.

    2002-01-01

    The anode (2) contains silicon. A battery with a silicon-containing anode is claimed. An Independent claim is also included for a method used to make the battery, comprising the doping of a silicon substrate (1) with charge capacity-increasing material (preferably boron, phosphorous or arsenic), etching the doped substrate layer in order to increase its porosity, and applying a cathode (3) in the form of a lithium oxide compound onto the resulting anode and applying an electrolyte (4) to the ...

  15. The corrosion protection of 2219-T87 aluminum by anodizing

    Science.gov (United States)

    Danford, M. D.

    1991-01-01

    Various types of anodizing coatings were studied for 2219-T87 aluminum. These include both type II and type III anodized coats which were water sealed and a newly developed and proprietary Magnaplate HCR (TM) coat. Results indicate that type II anodizing is not much superior to type II anodizing as far as corrosion protection for 2219-T87 aluminum is concerned. Magnaplate HCR (TM) coatings should provide superior corrosion protection over an extended period of time using a coating thickness of 51 microns (2.0 mils).

  16. Multilayer tape cast SOFC – Effect of anode sintering temperature

    DEFF Research Database (Denmark)

    Hauch, Anne; Birkl, Christoph; Brodersen, Karen

    2012-01-01

    be cost-efficient and simplify the half-cell manufacturing process. Fewer sintering steps (co-sintering), as well as fewer handling efforts, will be advantageous for up-scaled production. Previous reports have shown that our laboratory produces mechanically strong, high performing anode supported SOFC......Multilayer tape casting (MTC) is considered a promising, cost-efficient, up-scalable shaping process for production of planar anode supported solid oxide fuel cells (SOFC). Multilayer tape casting of the three layers comprising the half cell (anode support/active anode/electrolyte) can potentially...

  17. Ghosting phenomena in single photon counting imagers with Vernier anode.

    Science.gov (United States)

    Yang, Hao; Zhao, Baosheng; Qiurong, Yan; Liu, Yong'an; Hu, Huijun

    2011-02-01

    We provide the ghosting theory of two-dimensional Vernier anode based imagers. The single photon counting detection system based on Vernier anode is constructed. The ghosting, which occurs during the decoding of two-dimensional Vernier anode, and its possible solutions are described in detail. On the basis of the discussion of the decoding algorithm, the ghosting theoretical model is established. Phase conditions on which imaging ghosting can be avoided and the probability distribution function are proposed; the root causes of ghosting of two-dimensional Vernier anode are also discussed.

  18. Engineering governance: introducing a governance meta framework.

    NARCIS (Netherlands)

    Brand, N.; Beens, B.; Vuuregge, E.; Batenburg, R.

    2011-01-01

    There is a need for a framework that depicts strategic choices within an organisation with regard to potential governance structures. The governance meta framework provides the necessary structure in the current developments of governance. Performance as well as conformance are embedded in this

  19. Government and governance strategies in medical tourism

    NARCIS (Netherlands)

    Ormond, M.E.; Mainil, T.

    2015-01-01

    This chapter provides an overview of current government and governance strategies relative to medical tourism development and management around the world. Most studies on medical tourism have privileged national governments as key actors in medical tourism regulation and, in some cases, even

  20. Effects of anodizing potential and temperature on the growth of anodic TiO2 and its photoelectrochemical properties

    Science.gov (United States)

    Kapusta-Kołodziej, Joanna; Syrek, Karolina; Pawlik, Anna; Jarosz, Magdalena; Tynkevych, Olena; Sulka, Grzegorz D.

    2017-02-01

    Although nanoporous/nanotubular anodic TiO2 has been broadly investigated, there is still much to be learned about the fabrication, morphological characterization and applications of anodic TiO2 formed in the glycerol-based electrolyte. Nanoporous anodic titanium oxide (ATO) layers on Ti were prepared via a three-step anodization in a glycerol solution containing NH4F (0.38 wt%) and H2O (1.79 wt%). The effects of anodizing potential (30-70 V) and temperature (10-40 °C) on the growth and morphology of ATO layers were investigated in detail. The structural and morphological characterizations of received ATO layers were performed for the studied potentials and temperatures. Moreover, photoelectrochemical properties of formed TiO2 were studied as well. It has been shown, that the morphology of fabricated nanoporous ATO layers are strongly altered by anodizing temperature and potential. Particularly, an interesting finding is that the growth rate gradually increases up to 50 V independently of anodizing temperature and then decreases when anodizing potential increases to 70 V. Moreover, for all investigated anodizing temperatures, the structural features of ATO layers, such as the cell size, inner layer pore diameter, outer layer pore diameter, increase with increasing anodizing potential. The annealing of ATO samples synthesized at 20 °C revealed that the anatase grain size increases with increasing anodizing potential. It is noteworthy to mention that the highest photoconversion efficiency values were observed for samples synthesized at the anodizing temperature of 20 °C and 40 V.

  1. Developing digital forensic governance

    CSIR Research Space (South Africa)

    Grobler, M

    2010-03-01

    Full Text Available This paper presents a Digital Forensic (DF) governance framework and its mapping on the SANS ISO/IEC 38500:2009 Corporate governance of information technology structure. DF governance assists organisations in guiding the management team...

  2. Why Governments Intervene

    DEFF Research Database (Denmark)

    Knudsen, Jette Steen; Brown, Dana

    2015-01-01

    Why are national governments increasingly adopting policies on corporate social responsibility (CSR)? Government CSR policies have been explained either as a means of substituting or supporting (mirroring) domestic political-economic institutions and policies, or as a means for government...

  3. Voluntary Environmental Governance Arrangements

    NARCIS (Netherlands)

    van der Heijden, J.

    2012-01-01

    Voluntary environmental governance arrangements have focal attention in studies on environmental policy, regulation and governance. The four major debates in the contemporary literature on voluntary environmental governance arrangements are studied. The literature falls short of sufficiently

  4. E-Government Dimension

    OpenAIRE

    Rosiyadi, Didi; Suryana, Nana; Cahyana, Ade; Nuryani, Nuryani

    2007-01-01

    Makalah ini mengemukakan E-Government Dimension yang merupakan salah satu hasil TahapanPengumpulan Data, dimana tahapan ini adalah bagian dari penelitian kompetitif di Lembaga Ilmu PengetahuanIndonesia 2007 yang sekarang sedang dilakukan. Data E-Government Dimension ini didapatkan dari berbagaisumber yang meliputi E-Government beberapa Negara di dunia, E-Government yang dibangun oleh beberapapenyedia aplikasi E-Government. E-Government Dimension terdiri dari tiga dimensi yaitu DemocraticDimen...

  5. VT Certified Local Governments

    Data.gov (United States)

    Vermont Center for Geographic Information — Vermont established its Certified Local Government (CLG) program in 1985 to better help local governments integrate historic preservation concerns with planning and...

  6. Anodic dissolution of metals in ionic liquids

    Directory of Open Access Journals (Sweden)

    Andrew P. Abbott

    2015-12-01

    Full Text Available The anodic dissolution of metals is an important topic for battery design, material finishing and metal digestion. Ionic liquids are being used in all of these areas but the research on the anodic dissolution is relatively few in these media. This study investigates the behaviour of 9 metals in an ionic liquid [C4mim][Cl] and a deep eutectic solvent, Ethaline, which is a 1:2 mol ratio mixture of choline chloride and ethylene glycol. It is shown that for the majority of metals studied a quasi-passivation of the metal surface occurs, primarily due to the formation of insoluble films on the electrode surface. The behaviour of most metals is different in [C4mim][Cl] to that in Ethaline due in part to the differences in viscosity. The formation of passivating salt films can be decreased with stirring or by increasing the electrolyte temperature, thereby increasing ligand transport to the electrode surface.

  7. Heterotrophic Anodic Denitrification in Microbial Fuel Cells

    Directory of Open Access Journals (Sweden)

    Jakub Drewnowski

    2016-06-01

    Full Text Available Nowadays, pollution caused by energy production systems is a major environmental concern. Therefore, the development of sustainable energy sources is required. Amongst others, the microbial fuel cell (MFC seems to be a possible solution because it can produce clean energy at the same time that waste is stabilized. Unfortunately, mainly due to industrial discharges, the wastes could contain nitrates, or nitrates precursors such ammonia, which could lead to lower performance in terms of electricity production. In this work, the feasibility of coupling anodic denitrification process with electricity production in MFC and the effect of the nitrates over the MFC performance were studied. During the experiments, it was observed that the culture developed in the anodic chamber of the MFC presented a significant amount of denitrificative microorganisms. The MFC developed was able to denitrify up to 4 ppm, without affecting the current density exerted, of about 1 mA/cm2. Regarding the denitrification process, it must be highlighted that the maximum denitrification rate achieved with the culture was about 60 mg·NO3−·L−1·h−1. Based on these results, it can be stated that it is possible to remove nitrates and to produce energy, without negatively affecting the electrical performance, when the nitrate concentration is low.

  8. Alternative Anode Reaction for Copper Electrowinning

    Energy Technology Data Exchange (ETDEWEB)

    2005-07-01

    This report describes a project funded by the Department of Energy, with additional funding from Bechtel National, to develop a copper electrowinning process with lower costs and lower emissions than the current process. This new process also includes more energy efficient production by using catalytic-surfaced anodes and a different electrochemical couple in the electrolyte, providing an alternative oxidation reaction that requires up to 50% less energy than is currently required to electrowin the same quantity of copper. This alternative anode reaction, which oxidizes ferric ions to ferrous, with subsequent reduction back to ferric using sulfur dioxide, was demonstrated to be technically and operationally feasible. However, pure sulfur dioxide was determined to be prohibitively expensive and use of a sulfur burner, producing 12% SO{sub 2}, was deemed a viable alternative. This alternate, sulfur-burning process requires a sulfur burner, waste heat boiler, quench tower, and reaction towers. The electrolyte containing absorbed SO{sub 2} passes through activated carbon to regenerate the ferrous ion. Because this reaction produces sulfuric acid, excess acid removal by ion exchange is necessary and produces a low concentration acid suitable for leaching oxide copper minerals. If sulfide minerals are to be leached or the acid unneeded on site, hydrogen was demonstrated to be a potential reductant. Preliminary economics indicate that the process would only be viable if significant credits could be realized for electrical power produced by the sulfur burner and for acid if used for leaching of oxidized copper minerals on site.

  9. Improving electrochemical performance of tin-based anodes formed ...

    Indian Academy of Sciences (India)

    when the nanostructured Cu–Sn–C thin film was used as an anode material since C increased the mechanical tol- erance of the thin film to the volume ... a longer cycle life compared to that of the pure Sn anode because during lithiation ... In this study, bare Sn and composite Cu–Sn and Cu–Sn–. C nanostructured thin film ...

  10. Application of multi-walled carbon nanotubes to enhance anodic ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-12-15

    Dec 15, 2009 ... A 252.6% increase in power output of the fuel cell was observed at an anode modified with 10 mg MWCNTs/ml dispersed in ... Key words: Multi-walled carbon nanotubes, microbial fuel cell, Enterobacter cloacae, functionalise, anode. INTRODUCTION ..... performance of direct methanol fuel cells. J. Power ...

  11. Battery, especially for portable devices, has an anode containing silicon

    NARCIS (Netherlands)

    Kan, S.Y.

    2002-01-01

    The anode (2) contains silicon. A battery with a silicon-containing anode is claimed. An Independent claim is also included for a method used to make the battery, comprising the doping of a silicon substrate (1) with charge capacity-increasing material (preferably boron, phosphorous or arsenic),

  12. Fundamental Investigation of Silicon Anode in Lithium-Ion Cells

    Science.gov (United States)

    Wu, James J.; Bennett, William R.

    2012-01-01

    Silicon is a promising and attractive anode material to replace graphite for high capacity lithium ion cells since its theoretical capacity is 10 times of graphite and it is an abundant element on Earth. However, there are challenges associated with using silicon as Li-ion anode due to the significant first cycle irreversible capacity loss and subsequent rapid capacity fade during cycling. Understanding solid electrolyte interphase (SEI) formation along with the lithium ion insertion/de-insertion kinetics in silicon anodes will provide greater insight into overcoming these issues, thereby lead to better cycle performance. In this paper, cyclic voltammetry and electrochemical impedance spectroscopy are used to build a fundamental understanding of silicon anodes. The results show that it is difficult to form the SEI film on the surface of a Si anode during the first cycle; the lithium ion insertion and de-insertion kinetics for Si are sluggish, and the cell internal resistance changes with the state of lithiation after electrochemical cycling. These results are compared with those for extensively studied graphite anodes. The understanding gained from this study will help to design better Si anodes, and the combination of cyclic voltammetry with impedance spectroscopy provides a useful tool to evaluate the effectiveness of the design modifications on the Si anode performance.

  13. Formation of complex anodic films on porous alumina matrices

    Indian Academy of Sciences (India)

    The kinetics of growth of complex anodic alumina films was investigated. These films were formed by filling porous oxide films (matrices) having deep pores. The porous films (matrices) were obtained voltastatically in (COOH)2 aqueous solution under various voltages. The filling was done by re-anodization in an electrolyte ...

  14. Application of multi-walled carbon nanotubes to enhance anodic ...

    African Journals Online (AJOL)

    The effect of multi-walled carbon nanotube (MWCNT) modification of anodes and the optimisation of relevant parameters thereof for application in an Enterobacter cloacae microbial fuel cell were examined. The H – type microbial fuel cells were used for the fundamental studies, with a carbon sheet as a control anode and ...

  15. Plasmonic properties of gold-coated nanoporous anodic alumina ...

    Indian Academy of Sciences (India)

    Abstract. Anodization of aluminium surfaces containing linearly oriented scratches leads to the formation of nanoporous anodic alumina (NAA) with the nanopores arranged preferentially along the scratch marks. NAA, when coated with a thin gold film, support plasmonic resonances. Dark-field spectroscopy revealed that ...

  16. DMFC anode polarization: Experimental analysis and model validation

    Energy Technology Data Exchange (ETDEWEB)

    Casalegno, A.; Marchesi, R. [Dipartimento di Energetica, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano (Italy)

    2008-01-03

    Anode two-phase flow has an important influence on DMFC performance and methanol crossover. In order to elucidate two-phase flow influence on anode performance, in this work, anode polarization is investigated combining experimental and modelling approach. A systematic experimental analysis of operating conditions influence on anode polarization is presented. Hysteresis due to operating condition is observed; experimental results suggest that it arises from methanol accumulation and has to be considered in evaluating DMFC performances and measurements reproducibility. A model of DMFC anode polarization is presented and utilised as tool to investigate anode two-phase flow. The proposed analysis permits one to produce a confident interpretation of the main involved phenomena. In particular, it confirms that methanol electro-oxidation kinetics is weakly dependent on methanol concentration and that methanol transport in gas phase produces an important contribution in anode feeding. Moreover, it emphasises the possibility to optimise anode flow rate in order to improve DMFC performance and reduce methanol crossover. (author)

  17. Anodization of cast aluminium alloys produced by different casting methods

    Directory of Open Access Journals (Sweden)

    K. Labisz

    2008-08-01

    Full Text Available In this paper the usability of two casting methods, of sand and high pressure cast for the anodization of AlSi12 and AlSi9Cu3 aluminium cast alloys was investigated. With defined anodization parameters like electrolyte composition and temperature, current type and value a anodic alumina surface layer was produced. The quality, size and properties of the anodic layer was investigated after the anodization of the chosen aluminium cast alloys. The Alumina layer was observed used light microscope, also the mechanical properties were measured as well the abrasive wear test was made with using ABR-8251 equipment. The researches included analyze of the influence of chemical composition, geometry and roughness of anodic layer obtained on aluminum casts. Conducted investigations shows the areas of later researches, especially in the direction of the possible, next optimization anodization process of aluminum casting alloys, for example in the range of raising resistance on corrosion to achieve a suitable anodic surface layer on elements for increasing applications in the aggressive environment for example as materials on working building constructions, elements in electronics and construction parts in air and automotive industry.

  18. Tubular bamboo charcoal for anode in microbial fuel cells

    Science.gov (United States)

    Zhang, Jun; Li, Jun; Ye, Dingding; Zhu, Xun; Liao, Qiang; Zhang, Biao

    2014-12-01

    The anode material plays a significant role in determining the performance of microbial fuel cells (MFCs). In this study, the bamboo charcoal tube is proposed as a novel anode substrate by carbonizing the natural bamboo. Its surface functional groups, biocompatibility and internal resistance are thoroughly investigated. Performance of the MFCs with a conventional graphite tube anode and a bamboo charcoal tube anode is also compared. The results indicate that the tubular bamboo charcoal anode exhibits advantages over the graphite tube anode in terms of rougher surface, superior biocompatibility and smaller total internal resistance. Moreover, the X-ray photoelectron spectroscopy (XPS) analysis for the bamboo charcoal reveals that the introduced C-N bonds facilitate the electron transfer between the biofilm and electrodes. As a result, the MFC with a bamboo charcoal tube anode achieves a 50% improvement in the maximum power density over the graphite tube case. Furthermore, scale-up of the bamboo charcoal tube anode is demonstrated by employing a bundle of tubular bamboo charcoal to reach higher power output.

  19. Trends in Catalytic Activity for SOFC Anode materials

    DEFF Research Database (Denmark)

    Rossmeisl, Jan; Bessler, W. G.

    2008-01-01

    for nine different metal/stabilized zirconia anodes. The experimentally-observed variation of electrode activity with anode material is well-correlated with the calculated stability of surface-adsorbed atomic oxygen, but uncorrelated with the stability of surface-adsorbed hydrogen. This finding indicates...

  20. Optimal Conditions for Fast Charging and Long Cycling Stability of Silicon Microwire Anodes for Lithium Ion Batteries, and Comparison with the Performance of Other Si Anode Concepts

    OpenAIRE

    Enrique Quiroga-González; Jürgen Carstensen; Helmut Föll

    2013-01-01

    Cycling tests under various conditions have been performed for lithium ion battery anodes made from free-standing silicon microwires embedded at one end in a copper current collector. Optimum charging/discharging conditions have been found for which the anode shows negligible fading (< 0.001%) over 80 cycles; an outstanding result for this kind of anodes. Several performance parameters of the anode have been compared to the ones of other Si anode concepts, showing that especially the capacity...

  1. Growth of anatase titanium dioxide nanotubes via anodization

    Directory of Open Access Journals (Sweden)

    Ed Adrian Dilla

    2012-06-01

    Full Text Available In this work, titanium dioxide nanotubes were grown via anodization of sputtered titanium thin films using different anodization parameters in order to formulate a method of producing long anatase titanium dioxide nanotubes intended for solar cell applications. The morphological features of the nanotubes grown via anodization were explored using a Philips XL30 Field Emission Scanning Electron Microscope. Furthermore, the grown nanotubes were also subjected to X-ray diffraction and Raman spectroscopy in order to investigate the effect of the predominant crystal orientation of the parent titanium thin film on the crystal phase of the nanotubes. After optimizing the anodization parameters, nanotubes with anatase TiO2 crystal phase and tube length more than 2 microns was produced from parent titanium thin films with predominant Ti(010 crystal orientation and using ammonium fluoride in ethylene glycol as an electrolyte with a working voltage equal to 60V during 1-hour anodization runs.

  2. Applications of Carbon Nanotubes for Lithium Ion Battery Anodes

    Directory of Open Access Journals (Sweden)

    Hyoung-Joon Jin

    2013-03-01

    Full Text Available Carbon nanotubes (CNTs have displayed great potential as anode materials for lithium ion batteries (LIBs due to their unique structural, mechanical, and electrical properties. The measured reversible lithium ion capacities of CNT-based anodes are considerably improved compared to the conventional graphite-based anodes. Additionally, the opened structure and enriched chirality of CNTs can help to improve the capacity and electrical transport in CNT-based LIBs. Therefore, the modification of CNTs and design of CNT structure provide strategies for improving the performance of CNT-based anodes. CNTs could also be assembled into free-standing electrodes without any binder or current collector, which will lead to increased specific energy density for the overall battery design. In this review, we discuss the mechanism of lithium ion intercalation and diffusion in CNTs, and the influence of different structures and morphologies on their performance as anode materials for LIBs.

  3. Interfacial chemistry of zinc anodes for reinforced concrete structures

    Energy Technology Data Exchange (ETDEWEB)

    Covino, B.S. Jr.; Bullard, S.J.; Cramer, S.D.; Holcomb, G.R. [Dept. of Energy, Albany, OR (United States). Albany Research Center; McGill, G.E.; Cryer, C.B. [Oregon Dept. of Transportation, Salem, OR (United States); Stoneman, A. [International Lead Zinc Research Organization, Research Triangle Park, NC (United States); Carter, R.R. [California Dept. of Transportation, Sacramento, CA (United States)

    1997-12-01

    Thermally-sprayed zinc anodes are used in both galvanic and impressed current cathodic protection systems for reinforced concrete structures. The Albany Research Center, in collaboration with the Oregon Department of Transportation, has been studying the effect of electrochemical aging on the bond strength of zinc anodes for bridge cathodic protection systems. Changes in anode bond strength and other anode properties can be explained by the chemistry of the zinc-concrete interface. The chemistry of the zinc-concrete interface in laboratory electrochemical aging studies is compared with that of several bridges with thermal-sprayed zinc anodes and which have been in service for 5 to 10 years using both galvanic and impressed current cathodic protection systems. The bridges are the Cape Creek Bridge on the Oregon coast and the East Camino Undercrossing near Placerville, CA. Also reported are interfacial chemistry results for galvanized steel rebar from the 48 year old Longbird Bridge in Bermuda.

  4. Mechanically stable insoluble titanium-lead anodes for sulfate electrolytes

    Directory of Open Access Journals (Sweden)

    Chmiola J.

    2003-01-01

    Full Text Available Different formulations of a new material to be used as an insoluble anode for copper electrowinning, a Ti-Pb composite, were investigated for both mechanical and electrochemical properties. Mechanical and metallographic characteristic tests, as well as short-term deposition tests were used to study the effect of the Ti/Pb ratio on anode performance. Yield strength and elastic modulus, obtained through tensile testing, significantly exceed that of lead. Metallographic procedures were used to assess the uniformity of lead distribution in the material, as well as porosity, which would be decreased below 1 % for most of the compositions under study. Short-term deposition tests were used to determine power consumption, deposit quality current efficiency and weight loss characteristics of the new anode material. The material with only 30 vol.% lead shows approximately the same electrochemical performance as a pure lead anode, but has much higher mechanical properties which prevent warping and extend the lifetime of the anode.

  5. Applications of Carbon Nanotubes for Lithium Ion Battery Anodes

    Science.gov (United States)

    Xiong, Zhili; Yun, Young Soo; Jin, Hyoung-Joon

    2013-01-01

    Carbon nanotubes (CNTs) have displayed great potential as anode materials for lithium ion batteries (LIBs) due to their unique structural, mechanical, and electrical properties. The measured reversible lithium ion capacities of CNT-based anodes are considerably improved compared to the conventional graphite-based anodes. Additionally, the opened structure and enriched chirality of CNTs can help to improve the capacity and electrical transport in CNT-based LIBs. Therefore, the modification of CNTs and design of CNT structure provide strategies for improving the performance of CNT-based anodes. CNTs could also be assembled into free-standing electrodes without any binder or current collector, which will lead to increased specific energy density for the overall battery design. In this review, we discuss the mechanism of lithium ion intercalation and diffusion in CNTs, and the influence of different structures and morphologies on their performance as anode materials for LIBs. PMID:28809361

  6. Results from a pilot cell test of cermet anodes

    Energy Technology Data Exchange (ETDEWEB)

    Windisch, Jr, C F; Strachan, D M; Henager, Jr, C H; Greenwell, E N [Pacific Northwest Lab., Richland, WA (United States); Alcorn, T R [Reynolds Metals Co., Muscle Shoals, AL (United States). Mfg. Technology Lab.

    1992-08-01

    Goal was to develop long-lasting, energy-efficient anodes for Hall-Heroult cells used to produce Al metal. The anodes were made from a ceramic/metal composite consisting of NiO and NiFe{sub 2}O{sub 4} and a Cu/Ni metal phase. Thirteen cermet anodes were tested at Reynolds Metals Co., Muscle Shoals, AL. All anodes corroded severely during the pilot test. Electrolyte components were found deep within the anodes. However, there were many deficiencies in the pilot cell test, mainly the failure to maintain optimal operating conditions. It is concluded that there is a variety of fabrication and operational considerations that need to be addressed carefully in any future testing. 118 figs, 16 tabs, 17 refs.(DLC)

  7. Degradation Mechanisms of SOFC Anodes in Coal Gas Containing Phosphorus

    Energy Technology Data Exchange (ETDEWEB)

    Marina, Olga A.; Coyle, Christopher A.; Thomsen, Edwin C.; Edwards, Danny J.; Coffey, Greg W.; Pederson, Larry R.

    2010-01-22

    The interaction of phosphorus in synthetic coal gas with the nickel-based anode of solid oxide fuel cells has been investigated. Tests with both anode-supported and electrolyte-supported button cells were performed at 700 to 800oC in synthetic coal gas containing 0.5 to 10 ppm phosphorus, introduced as phosphine. Two primary modes of degradation were observed. The most obvious was the formation of a series of bulk nickel phosphide phases, of which Ni3P, Ni5P2, Ni12P5 and Ni2P were identified. Phosphorus was essentially completely captured by the anode, forming a sharp boundary between converted and unconverted anode portions. These products partially coalesced into large grains, which eventually affected electronic percolation through the anode support. Thermodynamic calculations predict that formation of the first binary nickel phosphide phase is possible at sub-parts per billion concentrations in coal gas at temperatures relevant to fuel cell operation. A second mode of degradation is attributed to surface diffusion of phosphorus to the active anode/electrolyte interface to form an adsorption layer. Direct evidence for the presence of such an adsorption layer on nickel was obtained by surface spectroscopies on fracture surfaces. Further, cell performance losses were observed well before the entire anode was converted to bulk nickel phosphide. Impedance spectroscopy revealed that these losses were primarily due to growth in electrodic resistance, whereas large ohmic increases were visible when the entire anode was converted to nickel phosphide phases. The rate of resistance growth for anode-supported cells showed a very low dependence on phosphorus concentration, attributed to phosphorus activity control within the anode by bulk nickel phosphide products.

  8. Data governance implementation concept

    OpenAIRE

    Ullrichová, Jana

    2016-01-01

    This master´s thesis discusses concept of implementation for data governance. The theoretical part of this thesis is about data governance. It explains why data are important for company, describes definitoons of data governance, its history, its components, its principles and processes and fitting in company. Theoretical part is amended with examples of data governance failures and banking specifics. The main goal of this thesis is to create a concept for implementing data governance and its...

  9. Leisure, Government and Governance: A Swedish Perspective

    Science.gov (United States)

    Lindstrom, Lisbeth

    2011-01-01

    The leisure sector has witnessed a tremendous expansion since 1960. The purpose of this article is to analyse the decisions and goals of Swedish government policy during the period 1962 to 2005. The empirical analysis covers government Propositions and governmental investigations. The fields covered are sports, culture, exercise, tourism and…

  10. LOW-TEMPERATURE, ANODE-SUPPORTED HIGH POWER DENSITY SOLID OXIDE FUEL CELLS WITH NANOSTRUCTURED ELECTRODES

    Energy Technology Data Exchange (ETDEWEB)

    Professor Anil V. Virkar

    2003-05-23

    hydrocarbon fuels where reforming was achieved internally. Significant polarization losses also occur at the anode, especially at high fuel utilizations. An analysis of polarization losses requires that various contributions are isolated, and their dependence on pertinent parameters is quantitatively described. An investigation of fuel composition on gas transport through porous anodes was investigated and the role of fuel diluents was explored. This work showed that the molecular weight of the diluent has a significant effect on anode concentration polarization. This further showed that the presence of some molecular hydrogen is necessary to minimize polarization losses. Theoretical analysis has shown that the electrode microstructure has a profound effect on cell performance. In a series of experiments, cathode microstructural parameters were varied, without altering other parameters. Cathode microstructural parameters, especially three phase boundary (TPB) length, were estimated using techniques in quantitative stereology. Cell performance was quantitatively correlated with the relevant microstructural parameters, and charge transfer resistivity was explicitly evaluated. This is the first time that a fundamental parameter, which governs the activation polarization, has been quantitatively determined. An important parameter, which governs the cathodic activation polarization, and thus cell performance, is the ionic conductivity of the composite cathode. The traditional composite cathode is a mixture of LSM and YSZ. It is well known that Sr and Mg-doped LaGaO{sub 3} (LSGM), exhibits higher oxygen ion conductivity compared to YSZ. Cells were fabricated with composite cathodes comprising a mixture of LSM and LSGM. Studies demonstrated that LSGM-based composite cathodes exhibit excellent behavior. Studies have shown that Ni + YSZ is an excellent anode. In fact, in most cells, the principal polarization losses, at least at low fuel utilizations, are associated with the cathode

  11. Thin-film sulfuric acid anodizing as a replacement for chromic acid anodizing

    Science.gov (United States)

    Kallenborn, K. J.; Emmons, J. R.

    1995-01-01

    Chromic acid has long been used to produce a thin, corrosion resistant (Type I) coating on aluminum. Following anodizing, the hardware was sealed using a sodium dichromate solution. Sealing closes up pores inherent in the anodized coating, thus improving corrosion resistance. The thinness of the brittle coating is desirable from a fatigue standpoint, and chromium was absorbed by the coating during the sealing process, further improving corrosion resistance. Unfortunately, both chromic acid and sodium dichromate contain carcinogenic hexavalent chromium. Sulfuric acid is being considered as a replacement for chromic acid. Sulfuric acid of 10-20 percent concentration has traditionally been used to produce relatively thick (Types II and III) or abrasion resistant (Type III) coatings. A more dilute, that is five weight percent, sulfuric acid anodizing process, which produces a thinner coating than Type II or III, with nickel acetate as the sealant has been developed. The process was evaluated in regard to corrosion resistance, throwing power, fatigue life, and processing variable sensitivity, and shows promise as a replacement for the chromic acid process.

  12. ZIRCONIUM OXIDE NANOSTRUCTURES PREPARED BY ANODIC OXIDATION

    Energy Technology Data Exchange (ETDEWEB)

    Dang, Y. Y.; Bhuiyan, M.S.; Paranthaman, M. P.

    2008-01-01

    Zirconium oxide is an advanced ceramic material highly useful for structural and electrical applications because of its high strength, fracture toughness, chemical and thermal stability, and biocompatibility. If highly-ordered porous zirconium oxide membranes can be successfully formed, this will expand its real-world applications, such as further enhancing solid-oxide fuel cell technology. Recent studies have achieved various morphologies of porous zirconium oxide via anodization, but they have yet to create a porous layer where nanoholes are formed in a highly ordered array. In this study, electrochemical methods were used for zirconium oxide synthesis due to its advantages over other coating techniques, and because the thickness and morphology of the ceramic fi lms can be easily tuned by the electrochemical parameters, such as electrolyte solutions and processing conditions, such as pH, voltage, and duration. The effects of additional steps such as pre-annealing and post-annealing were also examined. Results demonstrate the formation of anodic porous zirconium oxide with diverse morphologies, such as sponge-like layers, porous arrays with nanoholes ranging from 40 to 75 nm, and nanotube layers. X-ray powder diffraction analysis indicates a cubic crystallographic structure in the zirconium oxide. It was noted that increased voltage improved the ability of the membrane to stay adhered to the zirconium substrate, whereas lower voltages caused a propensity for the oxide fi lm to fl ake off. Further studies are needed to defi ne the parameters windows that create these morphologies and to investigate other important characteristics such as ionic conductivity.

  13. Bacterial adherence to anodized titanium alloy

    Energy Technology Data Exchange (ETDEWEB)

    Peremarch, C Perez-Jorge; Tanoira, R Perez; Arenas, M A; Matykina, E; Conde, A; De Damborenea, J J; Gomez Barrena, E; Esteban, J, E-mail: cperemarch@fjd.es

    2010-11-01

    The aim of this study was to evaluate Staphylococcus sp adhesion to modified surfaces of anodized titanium alloy (Ti-6Al-4V). Surface modification involved generation of fluoride-containing titanium oxide nanotube films. Specimens of Ti-6Al-4V alloy 6-4 ELI-grade 23- meets the requirements of ASTM F136 2002A (AMS 2631B class A1) were anodized in a mixture of sulphuric/hydrofluoric acid at 20 V for 5 and 60 min to form a 100 nm-thick porous film of 20 nm pore diameter and 230 nm-thick nanotube films of 100 nm in diameter. The amount of fluorine in the oxide films was of 6% and of 4%, respectively. Collection strains and six clinical strains each of Staphylococcus aureus and Staphylococcus epidermidis were studied. The adherence study was performed using a previously published protocol by Kinnari et al. The experiments were performed in triplicates. As a result, lower adherence was detected for collection strains in modified materials than in unmodified controls. Differences between clinical strains were detected for both species (p<0.0001, Kruskal-Wallis test), although global data showed similar results to that of collection strains (p<0.0001, Kruskal-Wallis test). Adherence of bacteria to modified surfaces was decreased for both species. The results also reflect a difference in the adherence between S. aureus and S. epidermidis to the modified material. As a conclusion, not only we were able to confirm the decrease of adherence in the modified surface, but also the need to test multiple clinical strains to obtain more realistic microbiological results due to intraspecies differences.

  14. Three-dimensional metal scaffold supported bicontinuous silicon battery anodes.

    Science.gov (United States)

    Zhang, Huigang; Braun, Paul V

    2012-06-13

    Silicon-based lithium ion battery anodes are attracting significant attention because of silicon's exceptionally high lithium capacity. However, silicon's large volume change during cycling generally leads to anode pulverization unless the silicon is dispersed throughout a matrix in nanoparticulate form. Because pulverization results in a loss of electric connectivity, the reversible capacity of most silicon anodes dramatically decays within a few cycles. Here we report a three-dimensional (3D) bicontinuous silicon anode formed by depositing a layer of silicon on the surface of a colloidal crystal templated porous nickel metal scaffold, which maintains electrical connectivity during cycling due to the scaffold. The porous metal framework serves to both impart electrical conductivity to the anode and accommodate the large volume change of silicon upon lithiation and delithiation. The initial capacity of the bicontinuous silicon anode is 3568 (silicon basis) and 1450 mAh g(-1) (including the metal framework) at 0.05C. After 100 cycles at 0.3C, 85% of the capacity remains. Compared to a foil-supported silicon film, the 3D bicontinuous silicon anode exhibits significantly improved mechanical stability and cycleability.

  15. Nanostructural Engineering of Nanoporous Anodic Alumina for Biosensing Applications

    Directory of Open Access Journals (Sweden)

    Josep Ferré-Borrull

    2014-07-01

    Full Text Available Modifying the diameter of the pores in nanoporous anodic alumina opens new possibilities in the application of this material. In this work, we review the different nanoengineering methods by classifying them into two kinds: in situ and ex situ. Ex situ methods imply the interruption of the anodization process and the addition of intermediate steps, while in situ methods aim at realizing the in-depth pore modulation by continuous changes in the anodization conditions. Ex situ methods permit a greater versatility in the pore geometry, while in situ methods are simpler and adequate for repeated cycles. As an example of ex situ methods, we analyze the effect of changing drastically one of the anodization parameters (anodization voltage, electrolyte composition or concentration. We also introduce in situ methods to obtain distributed Bragg reflectors or rugate filters in nanoporous anodic alumina with cyclic anodization voltage or current. This nanopore engineering permits us to propose new applications in the field of biosensing: using the unique reflectance or photoluminescence properties of the material to obtain photonic barcodes, applying a gold-coated double-layer nanoporous alumina to design a self-referencing protein sensor or giving a proof-of-concept of the refractive index sensing capabilities of nanoporous rugate filters.

  16. On self-sustainment of DC discharges with gridded anode

    Science.gov (United States)

    Yuan, Chengxun; Yao, Jingfeng; Eliseev, S. I.; Bogdanov, E. A.; Kudryavtsev, A. A.; Zhou, Zhongxiang

    2017-10-01

    The paper presents results of numerical investigation of a large-volume plasma source based on a DC discharge with gridded anode. Geometry and configuration of the electrodes were chosen so as to ensure the formation of a cathode sheath, which would accelerate electrons up to high energies and inject them into the post-anode space and create plasma. Simulations were carried out using a hybrid model, and distributions of the main discharge parameters were obtained in a wide range of currents. At low currents, cathode sheath occupies whole interelectrode gap while plasma is formed in the post-anode space. It is shown that ions moving through the anode grid into the interelectrode gap cause reduction of discharge voltage when compared to the case of classical obstructed discharge with virtually closed anode grid. At higher currents, however, plasma is formed within the interlectrode gap as well, and ions moving from plasma in the post-anode space become trapped by reversed electric field. This essentially nullifies influence of the post-anode plasma on discharge properties.

  17. Effects of Charcoal Addition on the Properties of Carbon Anodes

    Directory of Open Access Journals (Sweden)

    Asem Hussein

    2017-03-01

    Full Text Available Wood charcoal is an attractive alternative to petroleum coke in production of carbon anodes for the aluminum smelting process. Calcined petroleum coke is the major component in the anode recipe and its consumption results in a direct greenhouse gas (GHG footprint for the industry. Charcoal, on the other hand, is considered as a green and abundant source of sulfur-free carbon. However, its amorphous carbon structure and high contents of alkali and alkaline earth metals (e.g., Na and Ca make charcoal highly reactive to air and CO2. Acid washing and heat treatment were employed in order to reduce the reactivity of charcoal. The pre-treated charcoal was used to substitute up to 10% of coke in the anode recipe in an attempt to investigate the effect of this substitution on final anode properties. The results showed deterioration in the anode properties by increasing the charcoal content. However, by adjusting the anode recipe, this negative effect can be considerably mitigated. Increasing the pitch content was found to be helpful to improve the physical properties of the anodes containing charcoal.

  18. Atmospheric pressure arc discharge with ablating graphite anode

    Energy Technology Data Exchange (ETDEWEB)

    Nemchinsky, V. A. [Keiser University, Fort Lauderdale Campus, FL, 33309, USA; Raitses, Y. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States)

    2015-05-18

    The anodic carbon arc discharge is used to produce carbon nanoparticles. Recent experiments with the carbon arc at atmospheric pressure helium demonstrated the enhanced ablation rate for narrow graphite anodes resulting in high deposition rates of carbonaceous products on the copper cathode (Fetterman et al 2008 Carbon 46 1322–6). The proposed model explains these results with interconnected steady-state models of the cathode and the anode processes. When considering cathode functioning, the model predicts circulation of the particles in the near-cathode region: evaporation of the cathode material, ionization of evaporated atoms and molecules in the near-cathode plasma, return of the resulting ions to the cathode, surface recombination of ions and electrons followed again by cathode evaporation etc. In the case of the low anode ablation rate, the ion acceleration in the cathode sheath provides the major cathode heating mechanism. In the case of an intensive anode ablation, an additional cathode heating is due to latent fusion heat of the atomic species evaporated from the anode and depositing at the cathode. Using the experimental arc voltage as the only input discharge parameter, the model allows us to calculate the anode ablation rate. A comparison of the results of calculations with the available experimental data shows reasonable agreement.

  19. Inert Anode Life in Low Temperature Reduction Process

    Energy Technology Data Exchange (ETDEWEB)

    Bradford, Donald R.

    2005-06-30

    The production of aluminum metal by low temperature electrolysis utilizing metal non-consumable anodes and ceramic cathodes was extensively investigated. Tests were performed with traditional sodium fluoride--aluminum fluoride composition electrolytes, potassium fluoride-- aluminum fluoride electrolytes, and potassium fluoride--sodium fluoride--aluminum fluoride electrolytes. All of the Essential First-Tier Requirements of the joint DOE-Aluminum Industry Inert Anode Road Map were achieved and those items yet to be resolved for commercialization of this technology were identified. Methods for the fabrication and welding of metal alloy anodes were developed and tested. The potential savings of energy and energy costs were determined and potential environmental benefits verified.

  20. Na-Ion Battery Anodes: Materials and Electrochemistry.

    Science.gov (United States)

    Luo, Wei; Shen, Fei; Bommier, Clement; Zhu, Hongli; Ji, Xiulei; Hu, Liangbing

    2016-02-16

    The intermittent nature of renewable energy sources, such as solar and wind, calls for sustainable electrical energy storage (EES) technologies for stationary applications. Li will be simply too rare for Li-ion batteries (LIBs) to be used for large-scale storage purposes. In contrast, Na-ion batteries (NIBs) are highly promising to meet the demand of grid-level storage because Na is truly earth abundant and ubiquitous around the globe. Furthermore, NIBs share a similar rocking-chair operation mechanism with LIBs, which potentially provides high reversibility and long cycling life. It would be most efficient to transfer knowledge learned on LIBs during the last three decades to the development of NIBs. Following this logic, rapid progress has been made in NIB cathode materials, where layered metal oxides and polyanionic compounds exhibit encouraging results. On the anode side, pure graphite as the standard anode for LIBs can only form NaC64 in NIBs if solvent co-intercalation does not occur due to the unfavorable thermodynamics. In fact, it was the utilization of a carbon anode in LIBs that enabled the commercial successes. Anodes of metal-ion batteries determine key characteristics, such as safety and cycling life; thus, it is indispensable to identify suitable anode materials for NIBs. In this Account, we review recent development on anode materials for NIBs. Due to the limited space, we will mainly discuss carbon-based and alloy-based anodes and highlight progress made in our groups in this field. We first present what is known about the failure mechanism of graphite anode in NIBs. We then go on to discuss studies on hard carbon anodes, alloy-type anodes, and organic anodes. Especially, the multiple functions of natural cellulose that is used as a low-cost carbon precursor for mass production and as a soft substrate for tin anodes are highlighted. The strategies of minimizing the surface area of carbon anodes for improving the first-cycle Coulombic efficiency are

  1. Forms of global governence

    Directory of Open Access Journals (Sweden)

    Maxim V. Kharkevich

    2014-01-01

    Full Text Available Global governance as a concept defines the meaning of contemporary world politics both as a discipline and as reality. Interdependent and globalized world requires governance, and a global government has not been formed yet. The theoretical possibility of global governance without global government is proved and justified. The purpose of this article is to analytically identify possible forms of global governance. Three such forms of global governance are identified: hierarchical, market and network. In a hierarchy the governance is due to the asymmetry of power between the parties. Market control happens via anonymous pricing mechanism. Network, in contrast to the market is characterized by a closer value link between the actors, but unlike the hierarchical relationship actors are free to leave the network. Global governance takes three forms and is being implemented by different actors. To determine the most efficient form of global governance is impossible. Efficiency depends on the match between a form and an object of government. It should be noted that meta governance is likely to remain a monopoly of institutionally strong states in global governance.

  2. Effects of anodizing conditions and annealing temperature on the morphology and crystalline structure of anodic oxide layers grown on iron

    Science.gov (United States)

    Pawlik, Anna; Hnida, Katarzyna; Socha, Robert P.; Wiercigroch, Ewelina; Małek, Kamilla; Sulka, Grzegorz D.

    2017-12-01

    Anodic iron oxide layers were formed by anodization of the iron foil in an ethylene glycol-based electrolyte containing 0.2 M NH4F and 0.5 M H2O at 40 V for 1 h. The anodizing conditions such as electrolyte composition and applied potential were optimized. In order to examine the influence of electrolyte stirring and applied magnetic field, the anodic samples were prepared under the dynamic and static conditions in the presence or absence of magnetic field. It was shown that ordered iron oxide nanopore arrays could be obtained at lower anodizing temperatures (10 and 20 °C) at the static conditions without the magnetic field or at the dynamic conditions with the applied magnetic field. Since the as-prepared anodic layers are amorphous in nature, the samples were annealed in air at different temperatures (200-500 °C) for a fixed duration of time (1 h). The morphology and crystal phases developed after anodization and subsequent annealing were characterized using field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. The results proved that the annealing process transforms the amorphous layer into magnetite and hematite phases. In addition, the heat treatment results in a substantial decrease in the fluorine content and increase in the oxygen content.

  3. Government and Business

    DEFF Research Database (Denmark)

    Campbell, John L.

    2015-01-01

    There is a vast literature about the relationships between government and business in advanced capitalist societies.......There is a vast literature about the relationships between government and business in advanced capitalist societies....

  4. Transformative environmental governance

    Science.gov (United States)

    Chaffin, Brian C.; Garmestani, Ahjond S.; Gunderson, Lance H.; Harm Benson, Melinda; Angeler, David G.; Arnold, Craig Anthony (Tony); Cosens, Barbara; Kundis Craig, Robin; Ruhl, J.B.; Allen, Craig R.

    2016-01-01

    Transformative governance is an approach to environmental governance that has the capacity to respond to, manage, and trigger regime shifts in coupled social-ecological systems (SESs) at multiple scales. The goal of transformative governance is to actively shift degraded SESs to alternative, more desirable, or more functional regimes by altering the structures and processes that define the system. Transformative governance is rooted in ecological theories to explain cross-scale dynamics in complex systems, as well as social theories of change, innovation, and technological transformation. Similar to adaptive governance, transformative governance involves a broad set of governance components, but requires additional capacity to foster new social-ecological regimes including increased risk tolerance, significant systemic investment, and restructured economies and power relations. Transformative governance has the potential to actively respond to regime shifts triggered by climate change, and thus future research should focus on identifying system drivers and leading indicators associated with social-ecological thresholds.

  5. Nordic Corporate Governance Revisited

    DEFF Research Database (Denmark)

    Thomsen, Steen

    2016-01-01

    This paper reviews the key elements of the Nordic governance model, which include a distinct legal system, high governance ratings and low levels of corruption. Other characteristics include concentrated ownership, foundation ownership, semi two-tier board structures, employee representation...

  6. Methods for solid electrolyte interphase formation and anode pre-lithiation of lithium ion capacitors

    Energy Technology Data Exchange (ETDEWEB)

    Raman, Santhanam; Xi, Xiaomei; Ye, Xiang-Rong

    2017-07-18

    A method of pre-doping an anode of an energy storage device can include immersing the anode and a dopant source in an electrolyte, and coupling a substantially constant current between the anode and the dopant source. A method of pre-doping an anode of an energy storage device can include immersing the anode and a dopant source in an electrolyte, and coupling a substantially constant voltage across the anode and the dopant source. An energy storage device can include an anode having a lithium ion pre-doping level of about 60% to about 90%.

  7. The effect of antimony presence in anodic copper on kinetics and mechanism of anodic dissolution and cathodic deposition of copper

    Directory of Open Access Journals (Sweden)

    Stanković Z.D.

    2008-01-01

    Full Text Available The influence of the presence of Sb atoms, as foreign metal atoms in anode copper, on kinetics, and, on the mechanism of anodic dissolution and cathodic deposition of copper in acidic sulfate solution has been investigated. The galvanostatic single-pulse method has been used. Results indicate that presence of Sb atoms in anode copper increase the exchange current density as determined from the Tafel analysis of the electrode reaction. It is attributed to the increase of the crystal lattice parameter determined from XRD analysis of the electrode material.

  8. Electrical Resistance Measurements and Microstructural Characterization of the Anode/Interconnect Contact in Simulated Anode-Side SOFC Conditions

    DEFF Research Database (Denmark)

    Harthøj, Anders; Alimadadi, Hossein; Holt, Tobias

    2015-01-01

    in phase transformation of the steel and in formation of oxides with a poor electrical conductivity in the anode. In this study, the area specific resistance (ASR) of the steel Crofer 22 APU, in contact with a Ni/YSZ anode with and without a tape casted CeO2 barrier layer was measured in simulated SOFC......Metallic interconnects in solid oxide fuel cell (SOFC) stacks are often in direct contact with a nickel/yttria stabilized zirconia (Ni/YSZ) cermet anode. Interdiffusion between the two components may occur at the operating temperature of 700–850◦C. The alteration of chemical composition can result...

  9. Project governance: selected South African government experiments

    Directory of Open Access Journals (Sweden)

    G. van der Walt

    2008-07-01

    Full Text Available Some form of accountability and power structure binds all organisations. Such structures are typically referred to as the “governance” structure of the organisation. In organisations that have relatively mature project applications and methodologies in place, governance mechanisms are established on more permanent bases. With its focus on performance, results and outcomes, project governance establishes decision-making structures, as well as accountability and responsibility mechanisms in public institutions to oversee projects. As government institutions increasingly place emphasis on project applications for policy implementation and service delivery initiatives, mechanisms or structures should be established to facilitate clear interfaces between the permanent organisation and the temporary project organisation. Such mechanisms or structures should enhance the governance of projects, that is, the strategic alignment of projects, the decentralisation of decision- making powers, rapid resource allocation, and the participation of external stakeholders. The purpose of this article is to explore the concept “project governance”, and to highlight examples of project governance as applied in selected government departments in provincial and national spheres. This would enable the establishment of best practice examples and assist to develop benchmarks for effective project applications for service delivery improvement.

  10. Anodic slimes formation in copper electrowinning

    Directory of Open Access Journals (Sweden)

    Ipinza, J.

    2004-02-01

    Full Text Available The slime formation in acidic electrolytes of copper with several metallic impurities has been studied. On Pb-Ca-Sn anode surface firstly the formation of PbSO4 takes place, then, it is transformed in PbO2, which covers the anode surface. It was experimentally established the formation of a manganese dioxide double layer at the anode. This layer was always composed of a thick external layer of non-adhering and easily removable scales, and of a thin internal layer, which adheres relatively well to the surface of the electrode. It was found that the manganese dioxide present in the slime is of different nature: a non-adhering layer produced by electrolysis (ε-MnO2 on the PbO2 surface and a pure chemical precipitate in the solution (β- MnO2. Lead sulfate was found on the β-MnO2layer when iron was in the electrolyte. When arsenic or antimony was present in the electrolyte, the slime was lead sulfate and amorphous compounds of those ions. Slime of Chilean electrowinning (EW plants is also discussed.

    Se estudió la formación de borras anódicas debido a la presencia de varias impurezas metálicas en electrólitos de cobre. Sobre la superficie de un ánodo de Pb-Ca-Sn se forma primero PbSO4 y luego se transforma en PbO2, el cual cubre la superficie del ánodo. Se estableció experimentalmente la formación de una doble capa de dióxido de manganeso en el ánodo. Esta estuvo siempre compuesta por una capa externa gruesa, no adherente y de fácil remoción, y otra interna delgada y adherida a la superficie del electrodo. Se encontró que los óxidos de manganeso en las borras eran de distinta naturaleza: una capa no adherente producida por electrólisis sobre la superficie de PbO2 (ε-MnO2 y una producida sólo por precipitación química en la solución (β-MnO2. A1 existir hierro en el electrólito se encontró sulfato de

  11. Tourism and Governance

    DEFF Research Database (Denmark)

    Dredge, Dianne

    2015-01-01

    This chapter discusses tourism education for sustainability with a particular focus on the challenges and opportunities associated with preparing students to work within complex tourism governance settings. It takes the position that the development of tourism within a sustainability framework...... and contemporary knowledge and understandings of governance; competencies for tourism governance for sustainability; and ethical action-oriented practice....

  12. Transformative environmental governance

    Science.gov (United States)

    Transformative governance is an approach to environmental governance that has the capacity to respond to, manage, and trigger regime shifts in coupled social-ecological systems (SESs) at multiple scales. The goal of transformative governance is to actively shift degraded SESs to ...

  13. Government failure : four types

    NARCIS (Netherlands)

    Dolfsma, W.A.

    Economists tend to see the market as a default option for social order and a role for government only when markets fail. Developing a convincing analysis of the role of government in economic processes, however, needs to start by considering government failure in its own terms. Drawing on insights

  14. Global water governance

    NARCIS (Netherlands)

    Gupta, J.; Falkner, R.

    2013-01-01

    Although (fresh) water challenges are primarily local in nature, globalization has led to feedback effects that make many water challenges global in nature. This chapter examines global water governance. It discusses four phases of water governance, argues that water governance is dispersed and

  15. Silicon Whisker and Carbon Nanofiber Composite Anode Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Physical Sciences Inc. (PSI) has successfully developed a silicon whisker and carbon nanofiber composite anode for lithium ion batteries on a Phase I program. PSI...

  16. Nanocomposite anode materials for sodium-ion batteries

    Science.gov (United States)

    Manthiram, Arumugam; Kim Il, Tae; Allcorn, Eric

    2016-06-14

    The disclosure relates to an anode material for a sodium-ion battery having the general formula AO.sub.x--C or AC.sub.x--C, where A is aluminum (Al), magnesium (Mg), titanium (Ti), vanadium (V), chromium (Cr), manganese (Mn), iron (Fe), cobalt (Co), nickel (Ni), zirconium (Zr), molybdenum (Mo), tungsten (W), niobium (Nb), tantalum (Ta), silicon (Si), or any combinations thereof. The anode material also contains an electrochemically active nanoparticles within the matrix. The nanoparticle may react with sodium ion (Na.sup.+) when placed in the anode of a sodium-ion battery. In more specific embodiments, the anode material may have the general formula M.sub.ySb-M'O.sub.x--C, Sb-MO.sub.x--C, M.sub.ySn-M'C.sub.x--C, or Sn-MC.sub.x--C. The disclosure also relates to rechargeable sodium-ion batteries containing these materials and methods of making these materials.

  17. Topics in Chemical Instrumentation: CII. Automated Anodic Stripping Voltammetry.

    Science.gov (United States)

    Stock, John T.; Ewing, Galen W., Ed.

    1980-01-01

    Presents details of anodic stripping analysis (ASV) in college chemistry laboratory experiments. Provides block diagrams of the analyzer system, circuitry and power supplies of the automated stripping analyzer, and instructions for implementing microcomputer control of the ASV. (CS)

  18. Virus-enabled silicon anode for lithium-ion batteries.

    Science.gov (United States)

    Chen, Xilin; Gerasopoulos, Konstantinos; Guo, Juchen; Brown, Adam; Wang, Chunsheng; Ghodssi, Reza; Culver, James N

    2010-09-28

    A novel three-dimensional Tobacco mosaic virus assembled silicon anode is reported. This electrode combines genetically modified virus templates for the production of high aspect ratio nanofeatured surfaces with electroless deposition to produce an integrated nickel current collector followed by physical vapor deposition of a silicon layer to form a high capacity silicon anode. This composite silicon anode produced high capacities (3300 mAh/g), excellent charge-discharge cycling stability (0.20% loss per cycle at 1C), and consistent rate capabilities (46.4% at 4C) between 0 and 1.5 V. The biological templated nanocomposite electrode architecture displays a nearly 10-fold increase in capacity over currently available graphite anodes with remarkable cycling stability.

  19. Determining localized anode condition to maintain effective corrosion protection.

    Science.gov (United States)

    2010-01-01

    Thermal sprayed zinc anodes used for impressed current cathodic protection of reinforced concrete deteriorate over time. : Two different technologies, ultrasound and electrical circuit resistance combined with water permeability, were : investigated ...

  20. Excitation of anodized alumina films with a light source

    DEFF Research Database (Denmark)

    Aggerbeck, Martin; Canulescu, Stela; Rechendorff, K.

    Optical properties of anodized aluminium alloys were determined by optical diffuse reflectance spectroscopy of such films. Samples with different concentrations of dopants were excited with a white-light source combined with an integrating sphere for fast determination of diffuse reflectance....... The UV-VIS reflectance of Ti-doped anodized aluminium films was measured over the wavelength range of 200 nm to 900 nm. Titanium doped-anodized aluminium films with 5-15 wt% Ti were characterized. Changes in the diffuse light scattering of doped anodized aluminium films, and thus optical appearance......, with doping are discussed. Using the Kubelka-Munk model on the diffuse reflectance spectra of such films, the bandgap Eg of the oxide alloys can be determined....

  1. Scanning Anode Field Emission Characterisation of Carbon Nanotube emitter arrays

    NARCIS (Netherlands)

    Berhanu, S.; Gröning, O.; Chen, Z.; Merikhi, J.; Bachmann, P.K.

    2011-01-01

    Scanning anode field emission microscopy (SAFEM) was used to characterise carbon nanotube (CNT) emitter arrays produced within Philips CediX-Technotubes' activities. Four different samples were investigated and compared. The field enhancement distributions were determined and the local field

  2. Stainless steel anodes for alkaline water electrolysis and methods of making

    Science.gov (United States)

    Soloveichik, Grigorii Lev

    2014-01-21

    The corrosion resistance of stainless steel anodes for use in alkaline water electrolysis was increased by immersion of the stainless steel anode into a caustic solution prior to electrolysis. Also disclosed herein are electrolyzers employing the so-treated stainless steel anodes. The pre-treatment process provides a stainless steel anode that has a higher corrosion resistance than an untreated stainless steel anode of the same composition.

  3. Metal-Supported SOFC with Ceramic-Based Anode

    DEFF Research Database (Denmark)

    Blennow Tullmar, Peter; Klemensø, Trine; Persson, Åsa Helen

    2011-01-01

    Metal-supported solid oxide fuel cells have shown promise to offer several potential advantages over conventional anode (Ni-YSZ) supported cells, such as increased resistance against mechanical and thermal stresses and a reduction in materials cost. The purpose of this work is to illustrate how......), zirconia-free anode, in a planar metal-supported SOFC concept is discussed. ©2011 COPYRIGHT ECS - The Electrochemical Society...

  4. Note: Anodic bonding with cooling of heat-sensitive areas

    DEFF Research Database (Denmark)

    Vesborg, Peter Christian Kjærgaard; Olsen, Jakob Lind; Henriksen, Toke Riishøj

    2010-01-01

    Anodic bonding of silicon to glass always involves heating the glass and device to high temperatures so that cations become mobile in the electric field. We present a simple way of bonding thin silicon samples to borosilicate glass by means of heating from the glass side while locally cooling heat......-sensitive areas from the silicon side. Despite the high thermal conductivity of silicon, this method allows a strong anodic bond to form just millimeters away from areas essentially at room temperature....

  5. Development of Planar Metal Supported SOFC with Novel Cermet Anode

    DEFF Research Database (Denmark)

    Blennow Tullmar, Peter; Hjelm, Johan; Klemensø, Trine

    2009-01-01

    Metal-supported solid oxide fuel cells are expected to offer several potential advantages over conventional anode (Ni-YSZ) supported cells, such as increased resistance against mechanical and thermal stresses and a reduction in materials cost. When Ni-YSZ based anodes are used in metal supported...... a promising performance and durability at a broad range of temperatures and is especially suitable for intermediate temperature operation....

  6. Planar metal-supported SOFC with novel cermet anode

    DEFF Research Database (Denmark)

    Blennow Tullmar, Peter; Hjelm, Johan; Klemensø, Trine

    2011-01-01

    Metal-supported solid oxide fuel cells are expected to offer several potential advantages over conventional anode (Ni-YSZ) supported cells. For example, increased resistance against mechanical and thermal stresses and a reduction in material costs. When Ni-YSZ based anodes are used in metal...... and durability at a broad range of temperatures and is especially suitable for intermediate temperature operation at around 650°C. © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim....

  7. Negotiating Collaborative Governance Designs

    DEFF Research Database (Denmark)

    Plotnikof, Mie

    2016-01-01

    the meaning negotiations of local designs, discursive tensions and resistance generate changes in the organizing. The article shows that a discursive approach offers concepts valuable for refining the understanding of the emergence of collaborative governance in practice, and proposes approaching this process...... as organizing accomplished through and complicated by endemic meaning negotiations and change....... governance designs emerge and change. The findings of a case study of local governments' efforts to innovate quality management in education through collaborative governance suggest that such form of governance is continuingly negotiated in communication during both design and implementation phases. Through...

  8. On the anodic aluminium oxide refractive index of nanoporous templates

    Science.gov (United States)

    Hierro-Rodriguez, A.; Rocha-Rodrigues, P.; Valdés-Bango, F.; Alameda, J. M.; Jorge, P. A. S.; Santos, J. L.; Araujo, J. P.; Teixeira, J. M.; Guerreiro, A.

    2015-11-01

    In the present study, we have determined the intrinsic refractive index of anodic aluminium oxide, which is originated by the formation of nanoporous alumina templates. Different templates have been fabricated by the conventional two-step anodization procedure in oxalic acid. Their porosities were modified by chemical wet etching allowing the tuning of their effective refractive indexes (air-filled nanopores  +  anodic aluminium oxide). By standard spectroscopic light transmission measurements, the effective refractive index for each different template was extracted in the VIS-NIR region. The determination of the intrinsic anodic aluminium oxide refractive index was performed by using the Maxwell-Garnett homogenization theory. The results are coincident for all the fabricated samples. The obtained refractive index (~1.55) is quite lower (~22%) than the commonly used Al2O3 handbook value (~1.75), showing that the amorphous nature of the anodic oxide structure strongly conditions its optical properties. This difference is critical for the correct design and modeling of optical plasmonic metamaterials based on anodic aluminium oxide nanoporous templates.

  9. Nanostructured silicon anodes for lithium ion rechargeable batteries.

    Science.gov (United States)

    Teki, Ranganath; Datta, Moni K; Krishnan, Rahul; Parker, Thomas C; Lu, Toh-Ming; Kumta, Prashant N; Koratkar, Nikhil

    2009-10-01

    Rechargeable lithium ion batteries are integral to today's information-rich, mobile society. Currently they are one of the most popular types of battery used in portable electronics because of their high energy density and flexible design. Despite their increasing use at the present time, there is great continued commercial interest in developing new and improved electrode materials for lithium ion batteries that would lead to dramatically higher energy capacity and longer cycle life. Silicon is one of the most promising anode materials because it has the highest known theoretical charge capacity and is the second most abundant element on earth. However, silicon anodes have limited applications because of the huge volume change associated with the insertion and extraction of lithium. This causes cracking and pulverization of the anode, which leads to a loss of electrical contact and eventual fading of capacity. Nanostructured silicon anodes, as compared to the previously tested silicon film anodes, can help overcome the above issues. As arrays of silicon nanowires or nanorods, which help accommodate the volume changes, or as nanoscale compliant layers, which increase the stress resilience of silicon films, nanoengineered silicon anodes show potential to enable a new generation of lithium ion batteries with significantly higher reversible charge capacity and longer cycle life.

  10. Copper anode corrosion affects power generation in microbial fuel cells

    KAUST Repository

    Zhu, Xiuping

    2013-07-16

    Non-corrosive, carbon-based materials are usually used as anodes in microbial fuel cells (MFCs). In some cases, however, metals have been used that can corrode (e.g. copper) or that are corrosion resistant (e.g. stainless steel, SS). Corrosion could increase current through galvanic (abiotic) current production or by increasing exposed surface area, or decrease current due to generation of toxic products from corrosion. In order to directly examine the effects of using corrodible metal anodes, MFCs with Cu were compared with reactors using SS and carbon cloth anodes. MFCs with Cu anodes initially showed high current generation similar to abiotic controls, but subsequently they produced little power (2 mW m-2). Higher power was produced with microbes using SS (12 mW m-2) or carbon cloth (880 mW m-2) anodes, with no power generated by abiotic controls. These results demonstrate that copper is an unsuitable anode material, due to corrosion and likely copper toxicity to microorganisms. © 2013 Society of Chemical Industry.

  11. Preparation of Sm doped cerium dioxide film by anodization

    Science.gov (United States)

    LIU, Xiaozhen; Yang, Junhua; Liu, Xiaozhou; Xia, Letian; Chen, Jie; Zhu, Ying

    2017-04-01

    The Sm doped cerium dioxide films were prepared with cerium foils as raw materials by anodization in Sm(NO3)3-Na2C2O4-NH3·H2O-H2O-(CH2OH)2 electrolyte. The anodic Sm doped cerium oxide film was heat treated at 550°C. The Sm doped cerium dioxide films were characterized with X-ray diffraction (XRD), energy-dispersive analyses of X-ray (EDAX), Fourier transform infrared (FTIR) techniques and scanning electron microcopy (SEM), respectively. The anodic Sm doped cerium oxide film is semi crystalline film. The heat treated anodic Sm doped cerium oxide film at 550°C has a structure of cubic fluorite. The doping of Sm is replacement doping or caulking doping. The Sm doped cerium dioxide film is porous film. The water, ethylene glycol and CO2 are adsorbed in the anodic Sm doped cerium oxide film. The adsorbing water, ethylene glycol and CO2 in the anodic Sm doped cerium oxide film are removed at 550°C. The Sm doped cerium dioxide film has strong absorption in the range of 1200 ~ 4000cm-1.

  12. Microbial community composition is unaffected by anode potential

    KAUST Repository

    Zhu, Xiuping

    2014-01-21

    There is great controversy on how different set anode potentials affect the performance of a bioelectrochemical system (BES). It is often reported that more positive potentials improve acclimation and performance of exoelectrogenic biofilms, and alter microbial community structure, while in other studies relatively more negative potentials were needed to achieve higher current densities. To address this issue, the biomass, electroactivity, and community structure of anodic biofilms were examined over a wide range of set anode potentials (-0.25, -0.09, 0.21, 0.51, and 0.81 V vs a standard hydrogen electrode, SHE) in single-chamber microbial electrolysis cells. Maximum currents produced using a wastewater inoculum increased with anode potentials in the range of -0.25 to 0.21 V, but decreased at 0.51 and 0.81 V. The maximum currents were positively correlated with increasing biofilm biomass. Pyrosequencing indicated biofilm communities were all similar and dominated by bacteria most similar to Geobacter sulfurreducens. Differences in anode performance with various set potentials suggest that the exoelectrogenic communities self-regulate their exocellular electron transfer pathways to adapt to different anode potentials. © 2013 American Chemical Society.

  13. Electrophoretic deposition of silica on the anodized stainless steel

    Science.gov (United States)

    Suari, Ni Made Intan Putri; Setyawan, Heru

    2017-05-01

    The aim of this work is to evaluate the corrosion behavior of anodized stainless steel substrates coated by electrophoretic deposition (EPD) from stabilized aqueous SiO2 sol-acetic acid-isopropyl alcohol. An oxalic acid solution was used as the electrolyte in anodization processes. The effect of oxalic acid concentration and voltage of anodization on the corrosion protective properties of deposited films were evaluated. The sols for EPD were prepared by mixing of given volumes of acetic acid, isopropanol and SiO2 with the composition in molar ratio CH3COOH/isopropanol/SiO2 is 0.1938/0.5048/0.0028. The corrosion behavior of the coated substrates were studied by linear polarization and electrochemical impedance spectroscopy (EIS). Potentiodynamic studies of coating showed that the corrosions protection behavior of silica coating increase by the increase of oxalic acid concentration and voltage of anodization. This behavior was confirmed by EIS showing that the pore resistance increase by the increase of oxalic acid concentration and voltage of anodization. EPD with anodization is thus proposed as a good alternative method to obtain coating with good protective properties.

  14. Optimal Conditions for Fast Charging and Long Cycling Stability of Silicon Microwire Anodes for Lithium Ion Batteries, and Comparison with the Performance of Other Si Anode Concepts

    Directory of Open Access Journals (Sweden)

    Enrique Quiroga-González

    2013-10-01

    Full Text Available Cycling tests under various conditions have been performed for lithium ion battery anodes made from free-standing silicon microwires embedded at one end in a copper current collector. Optimum charging/discharging conditions have been found for which the anode shows negligible fading (< 0.001% over 80 cycles; an outstanding result for this kind of anodes. Several performance parameters of the anode have been compared to the ones of other Si anode concepts, showing that especially the capacity as well as the rates of charge flow per nominal area of anode are the highest for the present anode. With regard to applications, the specific parameters per area are more important than the specific gravimetric parameters like the gravimetric capacity, which is good for comparing the capacity between materials but not enough for comparing between anodes.

  15. Process for anodizing a robotic device

    Science.gov (United States)

    Townsend, William T [Weston, MA

    2011-11-08

    A robotic device has a base and at least one finger having at least two links that are connected in series on rotary joints with at least two degrees of freedom. A brushless motor and an associated controller are located at each joint to produce a rotational movement of a link. Wires for electrical power and communication serially connect the controllers in a distributed control network. A network operating controller coordinates the operation of the network, including power distribution. At least one, but more typically two to five, wires interconnect all the controllers through one or more joints. Motor sensors and external world sensors monitor operating parameters of the robotic hand. The electrical signal output of the sensors can be input anywhere on the distributed control network. V-grooves on the robotic hand locate objects precisely and assist in gripping. The hand is sealed, immersible and has electrical connections through the rotary joints for anodizing in a single dunk without masking. In various forms, this intelligent, self-contained, dexterous hand, or combinations of such hands, can perform a wide variety of object gripping and manipulating tasks, as well as locomotion and combinations of locomotion and gripping.

  16. Governance and organizational theory

    Directory of Open Access Journals (Sweden)

    Carlos E. Quintero Castellanos

    2017-07-01

    Full Text Available The objective of this essay is to propose a way to link the theoretical body that has been weaved around governance and organizational theory. For this, a critical exposition is done about what is the theoretical core of governance, the opportunity areas are identified for the link of this theory with organizational theory. The essay concludes with a proposal for the organizational analysis of administrations in governance. The essay addresses with five sections. The first one is the introduction. In the second one, I present a synthesis of the governance in its current use. In the next one are presented the work lines of the good governance. In the fourth part, I show the organizational and managerial limits in the governance theory. The last part develops the harmonization proposal for the governance and organizational theories.

  17. Fabrication and Characterization of Graded Anodes for Anode-Supported Solid Oxide Fuel Cells by Tape Casting and Lamination

    DEFF Research Database (Denmark)

    Beltran-Lopez, J.F.; Laguna-Bercero, M.A.; Gurauskis, Jonas

    2014-01-01

    Graded anodes for anode-supported solid oxide fuel cells (SOFCs) are fabricated by tape casting and subsequent cold lamination of plates using different compositions. Rheological parameters are adjusted to obtain stable suspensions for tape casting. The conditions for the tape casting and laminat......Graded anodes for anode-supported solid oxide fuel cells (SOFCs) are fabricated by tape casting and subsequent cold lamination of plates using different compositions. Rheological parameters are adjusted to obtain stable suspensions for tape casting. The conditions for the tape casting...... and homogeneous distribution of nickel, zirconia, and pores. The laminated samples showed a total porosity of 18.7%(in vol%) and a bimodal pore size distribution centered in 20 and 150 nm, and the measured electrical resistivity of this sample was 120±12 μΩ cm. The novelty of the present work is the lamination...

  18. Impact de la preparation des anodes crues et des conditions de cuisson sur la fissuration dans des anodes denses

    Science.gov (United States)

    Amrani, Salah

    La fabrication de l'aluminium est realisee dans une cellule d'electrolyse, et cette operation utilise des anodes en carbone. L'evaluation de la qualite de ces anodes reste indispensable avant leur utilisation. La presence des fissures dans les anodes provoque une perturbation du procede l'electrolyse et une diminution de sa performance. Ce projet a ete entrepris pour determiner l'impact des differents parametres de procedes de fabrication des anodes sur la fissuration des anodes denses. Ces parametres incluent ceux de la fabrication des anodes crues, des proprietes des matieres premieres et de la cuisson. Une recherche bibliographique a ete effectuee sur tous les aspects de la fissuration des anodes en carbone pour compiler les travaux anterieurs. Une methodologie detaillee a ete mise au point pour faciliter le deroulement des travaux et atteindre les objectifs vises. La majorite de ce document est reservee pour la discussion des resultats obtenus au laboratoire de l'UQAC et au niveau industriel. Concernant les etudes realisees a l'UQAC, une partie des travaux experimentaux est reservee a la recherche des differents mecanismes de fissuration dans les anodes denses utilisees dans l'industrie d'aluminium. L'approche etait d'abord basee sur la caracterisation qualitative du mecanisme de la fissuration en surface et en profondeur. Puis, une caracterisation quantitative a ete realisee pour la determination de la distribution de la largeur de la fissure sur toute sa longueur, ainsi que le pourcentage de sa surface par rapport a la surface totale de l'echantillon. Cette etude a ete realisee par le biais de la technique d'analyse d'image utilisee pour caracteriser la fissuration d'un echantillon d'anode cuite. L'analyse surfacique et en profondeur de cet echantillon a permis de voir clairement la formation des fissures sur une grande partie de la surface analysee. L'autre partie des travaux est basee sur la caracterisation des defauts dans des echantillons d'anodes crues

  19. Governance or Governing – the Missing Link?

    Directory of Open Access Journals (Sweden)

    Luminiţa Maria Crăciun

    2010-07-01

    Full Text Available Governance and governing are two distinct concepts, but they intertwine. “Good governing” exercises good influence on development. “Good governance” supposes first a relationship of power focused on a series of reforms structured at three levels: the political – administrative level, the economic level, and the level of civil society. As this dimension is difficult to measure, the qualitative evaluation of the governing act raised the interest of the World Bank researchers, who elaborated and monitored the dynamics of a set of indicators, which includes six major dimensions of the governing. A retrospective concerning the image of governing in Romania during the period from 1996 to 2005 suggests a modest increase of the score: from -0.138 (1996 to 0.008 (2002; that was partially achieved based on the voice and responsibility index and on the political stability index, not on those that measure more directly the administrative performance or the integrity of the governing act. For a comparative study, we chose seven countries for the purposes of analysis (two new European Union member states: Romania and Bulgaria; two older member countries of the European Union: Slovenia and Latvia; three non-member states: Moldova, Ukraine, and Georgia, which reveal the quality of the governing from a comparative perspective. Corruption control completes the image created by the analyzed indicators. The mere formal accomplishment of commitments made in the pre-accession activity, doubled by recent internal evolutions, bring doubts about the credibility of the anticorruption reforms, as Romania continues to be considered the country with the highest CPI in the European Union. The pessimism of public opinion and the fact that only 34% of the Romanian people consider that the level of corruption will decrease in the following three years constitutes an alarm signal addressed to the governance, in view of the real reformation of the administration system

  20. Electrochemically anodized porous silicon: Towards simple and affordable anode material for Li-ion batteries.

    Science.gov (United States)

    Ikonen, T; Nissinen, T; Pohjalainen, E; Sorsa, O; Kallio, T; Lehto, V-P

    2017-08-11

    Silicon is being increasingly studied as the next-generation anode material for Li-ion batteries because of its ten times higher gravimetric capacity compared with the widely-used graphite. While nanoparticles and other nanostructured silicon materials often exhibit good cyclability, their volumetric capacity tends to be worse or similar than that of graphite. Furthermore, these materials are commonly complicated and expensive to produce. An effortless way to produce nanostructured silicon is electrochemical anodization. However, there is no systematic study how various material properties affect its performance in LIBs. In the present study, the effects of particle size, surface passivation and boron doping degree were evaluated for the mesoporous silicon with relatively low porosity of 50%. This porosity value was estimated to be the lowest value for the silicon material that still can accommodate the substantial volume change during the charge/discharge cycling. The optimal particle size was between 10-20 µm, the carbide layer enhanced the rate capability by improving the lithiation kinetics, and higher levels of boron doping were beneficial for obtaining higher specific capacity at lower rates. Comparison of pristine and cycled electrodes revealed the loss of electrical contact and electrolyte decay to be the major contributors to the capacity decay.

  1. Growth behavior of anodic porous alumina formed in malic acid solution

    Science.gov (United States)

    Kikuchi, Tatsuya; Yamamoto, Tsuyoshi; Suzuki, Ryosuke O.

    2013-11-01

    The growth behavior of anodic porous alumina formed on aluminum by anodizing in malic acid solutions was investigated. High-purity aluminum plates were electropolished in CH3COOH/HClO4 solutions and then anodized in 0.5 M malic acid solutions at 293 K and constant cell voltages of 200-350 V. The anodic porous alumina grew on the aluminum substrate at voltages of 200-250 V, and a black, burned oxide film was formed at higher voltages. The nanopores of the anodic oxide were only formed at grain boundaries of the aluminum substrate during the initial stage of anodizing, and then the growth region extended to the entire aluminum surface as the anodizing time increased. The anodic porous alumina with several defects was formed by anodizing in malic acid solution at 250 V, and oxide cells were approximately 300-800 nm in diameter.

  2. Civil Society and Governance

    DEFF Research Database (Denmark)

    Hulgård, Lars

    An illustration of how important the relationship is between civil society anbd governance. A short historic journey with four snapshots of times and situations that have provided interesting evidence about the connection between civil society and governance. My goal for the short historic journey...... is to make clear and hopefully even verify that providing knowledge about the impact of civil society and citizens’ participation on governance is one of the most urgent research tasks in the current period of time....

  3. Energy Efficiency Governance: Handbook

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    This handbook has been written to assist EE practitioners, government officials and stakeholders to establish effective EE governance structures for their country. The handbook provides readers with relevant information in an accessible format that will help develop comprehensive and effective governance mechanisms. For each of the specific topics dealt with (see Figure 1 in the Handbook), the IEA offers guidelines for addressing issues, or directs readers to examples of how such issues have been dealt with by specific countries.

  4. Internet Governance: An Introduction

    OpenAIRE

    Arthur J. Cordell; Prabir K. Neogi

    2007-01-01

    Internet Governance: An Introduction offers a complete guide to the “ins and outs” of Internet governance. Drawing on a range of international authors Internet Governance is best suited for those seeking an overview of the range of issues involved as the Internet becomes increasingly important to bu siness and to society in general, affecting the daily lives of millions of people around the world.

  5. Exploring Knowledge Governance

    DEFF Research Database (Denmark)

    Foss, Nicolai Juul; Mahoney, Joseph T

    Knowledge governance is characterized as a distinctive research subject, the understanding of which cuts across diverse fields in management. In particular, it represents an intersection of knowledge management, strategic management, and theories of the firm. Knowledge governance considers how...... deployment of governance mechanisms influences knowledge processes: sharing, retaining, and creating knowledge. We survey the papers in this volume of the special issue, and discuss the remaining research challenges....

  6. Gobernanza Versus Gobierno Governance Versus Government

    Directory of Open Access Journals (Sweden)

    Dany-Robert Dufour

    2009-06-01

    Full Text Available El desplazamiento del término moderno de gobierno por el postmoderno de gobernanza, pone de manifiesto un nuevo lenguaje postmoderno en el que se deja entrever que ambas nociones, gobierno y gobernanza, tienden a oponerse. La gobernanza corporativa designa la toma del poder del capitalismo financiero sobre el capitalismo industrial, que no es otra cosa que, por un lado, propender por la rentabilidad máxima para los accionistas, valorizar todo en el mercado sin consideraciones morales, obligar a los actores a la búsqueda de riesgo permanente y flexibilizar las relaciones jerárquicas en la Administración de la empresa; y por el otro, la marginación de la clase obrera. La gobernanza ha llegado a los asuntos políticos convirtiéndose en modelo de gestión pública por excelencia, ella trata que el gobierno reducido a su mínima expresión guie a una sociedad civil que adquiere un papel importante en la creación y seguimiento de las diferentes políticas, es decir, que el gobierno adquiere una forma flexible de regulación, es allá donde la gobernanza política nos conduce, a la supuesta autorregulación de los intereses privados que sumados pasan a configurar el interés general. En realidad se trata de una nueva forma de dominación marcada por un desvanecimiento político, donde la sociedad civil juega en contra del Estado. La gobernanza le está tendiendo una temible trampa a la democracia, en tanto se presenta como una ampliación de la democracia materializada en una mejor participación de la sociedad civil, destruyendo la persona pública que se forma por la unión de todos los otros y convirtiéndola en representante de intereses particulares.The displacement of the modern term of government for the postmodern one of governance, reveals a new postmodern language in which one is left to guess that both notions, government and governance, tend to be opposed. Corporate governance signifies the seizure of power of financial capitalism

  7. E-Government Partnerships Across Levels of Government

    OpenAIRE

    Charbit, Claire; Michalun, Varinia

    2009-01-01

    E-government Partnerships across Levels of Government, is an overview of the challenges and approaches to creating a collaborative and cooperative partnership across levels of government for e-government development and implementation.

  8. Removal of organic contaminants from secondary effluent by anodic oxidation with a boron-doped diamond anode as tertiary treatment

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Segura, Sergi, E-mail: sergigarcia@ub.edu [Advanced Water Management Centre, The University of Queensland, Level 4, Gehrmann Bld. (60), St Lucia, QLD 072 (Australia); Laboratori d’Electroquímica dels Materials i del Medi Ambient, Departament de Química Física, Facultat de Química, Universitat de Barcelona, Martí i Franquès 1-11, 08028 Barcelona (Spain); Keller, Jürg [Advanced Water Management Centre, The University of Queensland, Level 4, Gehrmann Bld. (60), St Lucia, QLD 072 (Australia); Brillas, Enric [Laboratori d’Electroquímica dels Materials i del Medi Ambient, Departament de Química Física, Facultat de Química, Universitat de Barcelona, Martí i Franquès 1-11, 08028 Barcelona (Spain); Radjenovic, Jelena, E-mail: j.radjenovic@awmc.uq.edu.au [Advanced Water Management Centre, The University of Queensland, Level 4, Gehrmann Bld. (60), St Lucia, QLD 072 (Australia)

    2015-02-11

    Graphical abstract: - Highlights: • Mineralization of secondary effluent by anodic oxidation with BDD anode. • Complete removal of 29 pharmaceuticals and pesticides at trace level concentrations. • Organochlorine and organobromine byproducts were formed at low μM concentrations. • Chlorine species evolution assessed to evaluate the anodic oxidation applicability. - Abstract: Electrochemical advanced oxidation processes (EAOPs) have been widely investigated as promising technologies to remove trace organic contaminants from water, but have rarely been used for the treatment of real waste streams. Anodic oxidation with a boron-doped diamond (BDD) anode was applied for the treatment of secondary effluent from a municipal sewage treatment plant containing 29 target pharmaceuticals and pesticides. The effectiveness of the treatment was assessed from the contaminants decay, dissolved organic carbon and chemical oxygen demand removal. The effect of applied current and pH was evaluated. Almost complete mineralization of effluent organic matter and trace contaminants can be obtained by this EAOP primarily due to the action of hydroxyl radicals formed at the BDD surface. The oxidation of Cl{sup −} ions present in the wastewater at the BDD anode gave rise to active chlorine species (Cl{sub 2}/HClO/ClO{sup −}), which are competitive oxidizing agents yielding chloramines and organohalogen byproducts, quantified as adsorbable organic halogen. However, further anodic oxidation of HClO/ClO{sup −} species led to the production of ClO{sub 3}{sup −} and ClO{sub 4}{sup −} ions. The formation of these species hampers the application as a single-stage tertiary treatment, but posterior cathodic reduction of chlorate and perchlorate species may reduce the risks associated to their presence in the environment.

  9. Kinetic experiments for evaluating the Nernst-Monod model for anode-respiring bacteria (ARB) in a biofilm anode.

    Science.gov (United States)

    Torres, César I; Marcus, Andrew Kato; Parameswaran, Prathap; Rittmann, Bruce E

    2008-09-01

    Anode-respiring bacteria (ARB) are able to transfer electrons from reduced substrates to a solid electrode. Previously, we developed a biofilm model based on the Nernst-Monod equation to describe the anode potential losses of ARB that transfer electrons through a solid conductive matrix. In this work, we develop an experimental setup to demonstrate how well the Nernst-Monod equation is able to represent anode potential losses in an ARB biofilm. We performed low-scan cyclic voltammetry (LSCV) throughout the growth phase of an ARB biofilm on a graphite electrode growing on acetate in continuous mode. The (j)V response of 9 LSCVs corresponded well to the Nernst-Monod equation, and the half-saturation potential (E(KA)) was -0.425 +/- 0.002 V vs Ag/AgCl at 30 degrees C (-0.155 +/- 0.002 V vs SHE). Anode-potential losses from the potential of acetate reached approximately 0.225 V at current density saturation, and this loss was determined by our microbial community's E(KA) value. The LSCVs at high current densities showed no significant deviation from the Nernst-Monod ideal shape, indicating that the conductivity of the biofilm matrix (kappa(bio)) was high enough (> or = 0.5 mS/cm) that potential loss did not affect the performance of the biofilm anode. Our results confirm the applicability of the Nernst-Monod equation for a conductive biofilm anode and give insights of the processes that dominate anode potential losses in microbial fuel cells.

  10. Low cost fuel cell diffusion layer configured for optimized anode water management

    Science.gov (United States)

    Owejan, Jon P; Nicotera, Paul D; Mench, Matthew M; Evans, Robert E

    2013-08-27

    A fuel cell comprises a cathode gas diffusion layer, a cathode catalyst layer, an anode gas diffusion layer, an anode catalyst layer and an electrolyte. The diffusion resistance of the anode gas diffusion layer when operated with anode fuel is higher than the diffusion resistance of the cathode gas diffusion layer. The anode gas diffusion layer may comprise filler particles having in-plane platelet geometries and be made of lower cost materials and manufacturing processes than currently available commercial carbon fiber substrates. The diffusion resistance difference between the anode gas diffusion layer and the cathode gas diffusion layer may allow for passive water balance control.

  11. Investigation of different anode materials for aluminium rechargeable batteries

    Science.gov (United States)

    Muñoz-Torrero, David; Leung, Puiki; García-Quismondo, Enrique; Ventosa, Edgar; Anderson, Marc; Palma, Jesús; Marcilla, Rebeca

    2018-01-01

    In order to shed some light into the importance of the anodic reaction in reversible aluminium batteries, we investigate here the electrodeposition of aluminium in an ionic liquid electrolyte (BMImCl-AlCl3) using different substrates. We explore the influence of the type of anodic material (aluminium, stainless steel and carbon) and its 3D geometry on the reversibility of the anodic reaction by cyclic voltammetry (CV) and galvanostatic charge-discharge. The shape of the CVs confirms that electrodeposition of aluminium was feasible in the three materials but the highest peak currents and smallest peak separation in the CV of the aluminium anode suggested that this material was the most promising. Interestingly, carbon-based substrates appeared as an interesting alternative due to the high peak currents in CV, moderate overpotentials and dual role as anode and cathode. 3D substrates such as fiber-based carbon paper and aluminium mesh showed significantly smaller overpotentials and higher efficiencies for Al reaction suggesting that the use of 3D substrates in full batteries might result in enhanced power. This is corroborated by polarization testing of full Al-batteries.

  12. Theory and simulation of anode spots in low pressure plasmas

    Science.gov (United States)

    Scheiner, Brett; Barnat, Edward V.; Baalrud, Scott D.; Hopkins, Matthew M.; Yee, Benjamin T.

    2017-11-01

    When electrodes are biased above the plasma potential, electrons accelerated through the associated electron sheath can dramatically increase the ionization rate of neutrals near the electrode surface. It has previously been observed that if the ionization rate is great enough, a double layer separates a luminous high-potential plasma attached to the electrode surface (called an anode spot or fireball) from the bulk plasma. Here, results of the first 2D particle-in-cell simulations of anode spot formation are presented along with a theoretical model describing the formation process. It is found that ionization leads to the build-up of an ion-rich layer adjacent to the electrode, forming a narrow potential well near the electrode surface that traps electrons born from ionization. It is shown that anode spot onset occurs when a quasineutral region is established in the potential well and the density in this region becomes large enough to violate the steady-state Langmuir condition, which is a balance between electron and ion fluxes across the double layer. A model for steady-state properties of the anode spot is also presented, which predicts values for the anode spot size, double layer potential drop, and form of the sheath at the electrode by considering particle, power, and current balance. These predictions are found to be consistent with the presented simulation and previous experiments.

  13. An ablative pulsed plasma thruster with a segmented anode

    Science.gov (United States)

    Zhang, Zhe; Ren, Junxue; Tang, Haibin; Ling, William Yeong Liang; York, Thomas M.

    2018-01-01

    An ablative pulsed plasma thruster (APPT) design with a ‘segmented anode’ is proposed in this paper. We aim to examine the effect that this asymmetric electrode configuration (a normal cathode and a segmented anode) has on the performance of an APPT. The magnetic field of the discharge arc, plasma density in the exit plume, impulse bit, and thrust efficiency were studied using a magnetic probe, Langmuir probe, thrust stand, and mass bit measurements, respectively. When compared with conventional symmetric parallel electrodes, the segmented anode APPT shows an improvement in the impulse bit of up to 28%. The thrust efficiency is also improved by 49% (from 5.3% to 7.9% for conventional and segmented designs, respectively). Long-exposure broadband emission images of the discharge morphology show that compared with a normal anode, a segmented anode results in clear differences in the luminous discharge morphology and better collimation of the plasma. The magnetic probe data indicate that the segmented anode APPT exhibits a higher current density in the discharge arc. Furthermore, Langmuir probe data collected from the central exit plane show that the peak electron density is 75% higher than with conventional parallel electrodes. These results are believed to be fundamental to the physical mechanisms behind the increased impulse bit of an APPT with a segmented electrode.

  14. 3 CFR - Government Contracting

    Science.gov (United States)

    2010-01-01

    ... contract oversight could reduce such sums significantly. Government outsourcing for services also raises... commercial services used by the Government, such as transportation, food, and maintenance. Office of... governmental functions. Agencies and departments must operate under clear rules prescribing when outsourcing is...

  15. Human-centred Governance

    DEFF Research Database (Denmark)

    Bason, Christian

    2017-01-01

    Design approaches are now being applied all over the world as a powerful approach to innovating public policies and services. Christian Bason, author of Leading public design: Discovering human-centred governance, argues that by bringing design methods into play, public managers can lead change...... with citizens at the centre, and discover a new model for steering public organisations: human-centred governance....

  16. Partnerships and Governance

    DEFF Research Database (Denmark)

    Damgaard, Bodil

    Three models of cooperation are outlined and their consequences for governance discussed, using case studies of local multisectoral collaboration on labour market related social policy - active social policy - in Denmark.......Three models of cooperation are outlined and their consequences for governance discussed, using case studies of local multisectoral collaboration on labour market related social policy - active social policy - in Denmark....

  17. Educational Governance in Denmark

    Science.gov (United States)

    Moos, Lejf

    2014-01-01

    Denmark has entered global competition by expanding collaboration with European countries, which is profoundly impacting the public sector and school governance. Relations between the state and institutions are transforming from traditional democratic, public-sector models of governance into new forms characterized as corporate and market-driven…

  18. Enforcement and Corporate Governance

    OpenAIRE

    Berglöf, Erik; Claessens, Stijn

    2004-01-01

    Enforcement more than regulations, laws-on-the-books, or voluntary codes is key to effective corporate governance, at least in transition and developing countries. Corporate governance and enforcement mechanisms are intimately linked as they affect firms' ability to commit to their stakeholders, in particular to external investors. The authors provide a framework for understanding these li...

  19. Using IT Governance

    Science.gov (United States)

    Brobst, Jan; Council, Chip

    2005-01-01

    The discussion in this article is intended to provide an examination of why top management, IT management, and internal auditors should be interested in IT governance. Some aspects of IT management will be described including implementation, auditing, availability, security, and alignment. One governance framework, COBIT, will be utilized as a…

  20. Governing through standards

    DEFF Research Database (Denmark)

    Brøgger, Katja

    This abstract adresses the ways in which new education standards have become integral to new modes of education governance. The paper explores the role of standards for accelerating the shift from national to transnational governance in higher education. Drawing on the case of higher education...

  1. Benefit from the Government

    NARCIS (Netherlands)

    Evert Pommer; Jedid-Jah Jonker

    2003-01-01

    Original title: Profijt van de overheid. Income levels are determined to a considerable extent by the government, which exerts an influence through social security and taxation. The traditional purchasing power tables are a reflection of this. However, the influence of the government goes

  2. Negotiating Collaborative Governance Designs

    DEFF Research Database (Denmark)

    Plotnikof, Mie

    2017-01-01

    This chapter addresses the design and implementation issues of collaborative governance, a public management practice aimed at involving stakeholders in problem-solving and public innovation.......This chapter addresses the design and implementation issues of collaborative governance, a public management practice aimed at involving stakeholders in problem-solving and public innovation....

  3. Hard and Soft Governance

    DEFF Research Database (Denmark)

    Moos, Lejf

    2009-01-01

    The governance and leadership at transnational, national and school level seem to be converging into a number of isomorphic forms as we see a tendency towards substituting 'hard' forms of governance, that are legally binding, with 'soft' forms based on persuasion and advice. This article analyses...

  4. Innovation in City Governments

    DEFF Research Database (Denmark)

    Lewis, Jenny M; Ricard, Lykke Margot; Klijn, Erik Hans

    Innovation has become an important focus for governments around the world over the last decade, with greater pressure on governments to do more with less, and expanding community expectations. Some are now calling this ‘social innovation’ – innovation that is related to creating new services......, are related to the innovations introduced by these cities. The volume maps and analyses the social networks of the three cities and examines boundary spanning within and outside of the cities. It also examines what leadership qualities are important for innovation. Innovation in City Governments: Structures...... that have value for stakeholders (such as citizens) in terms of the social and political outcomes they produce. Innovation in City Governments: Structures, Networks, and Leadership establishes an analytical framework of innovation capacity based on three dimensions: Structure - national governance...

  5. The Knowledge Governance Approach

    DEFF Research Database (Denmark)

    Foss, Nicolai J.

    An attempt is made to characterize a `knowledge governance approach' as a distinctive, emerging field that cuts across the fields of knowledge management, organisation studies, strategy and human resource management. Knowledge governance is taken up with how the deployment of administrative...... apparatus influences knowledge processes, such as sharing, retaining and creating knowledge. It insists on clear behavioural foundations, adopts an economizing perspective and examines efficient alignment between knowledge transactions with diverse characteristics and governance structures and mechanisms...... with diverse capabilities of handling these transactions. Various open research issues that a knowledge governance approach may illuminate are sketched. Although knowledge governance draws clear inspiration from organizational economics and `rational' organization theory, it recognizes that knowledge...

  6. Energy Efficiency Governance

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    The purpose of this report is to help EE practitioners, government officials and stakeholders to establish the most effective EE governance structures, given their specific country context. It also aims to provide readers with relevant and accessible information to support the development of comprehensive and effective governance mechanisms. The International Energy Agency (IEA) conducted a global review of many elements of EE governance,including legal frameworks, institutional frameworks, funding mechanisms, co-ordination mechanisms and accountability arrangements, such as evaluation and oversight. The research tools included a survey of over 500 EE experts in 110 countries, follow-up interviews of over 120 experts in 27 countries and extensive desk study and literature searches on good EE governance.

  7. Making Government Liquid

    DEFF Research Database (Denmark)

    du Gay, Paul; Millo, Yuval; Tuck, Penelope

    2012-01-01

    The financialised character of contemporary rationalities of public governance has been the subject of increased attention within a range of disciplinary and interdisciplinary fields. With this paper we propose a particular analytical framework, focused on the notion of 'governance devices......', for understanding the processes that underpin financialised governance and, more fundamentally, maintain the connections between markets and politics. Deploying three distinct cases, we indicate that these devices transcend divisions between the actor and the device and create a diff erent form of agency......- an assemblage. We argue that understanding such assemblages-their emergence, activity, and, frequently, their failures-opens a window on analysing the nature of contemporary forms of financialised governance as a technosocial system. In so doing we suggest that the governance devices approach can off er a way...

  8. Governance, Trust and Taxes

    DEFF Research Database (Denmark)

    Weihe, Guri; Joensen, E. Juanna Schröter

    This paper examines the role of social capital (trust) vis-à-vis the propensity of a country to be a tax haven. The empirical analysis corroborates that better governed countries have a higher ceteris paribus probability to be tax havens. However, social capital counteracts the effect of governance...... quality. This effect is so strong that the partial effect of governance quality is reversed for countries with the trust index in the top quartile – making these high trust countries less likely to be tax havens – even as governance quality is increased. Thus it is crucial to consider the interaction...... between institutions and social capital, since the same governance institutions have a different impact on the tax haven propensity for countries with different social capital....

  9. Privacy and Open Government

    Directory of Open Access Journals (Sweden)

    Teresa Scassa

    2014-06-01

    Full Text Available The public-oriented goals of the open government movement promise increased transparency and accountability of governments, enhanced citizen engagement and participation, improved service delivery, economic development and the stimulation of innovation. In part, these goals are to be achieved by making more and more government information public in reusable formats and under open licences. This paper identifies three broad privacy challenges raised by open government. The first is how to balance privacy with transparency and accountability in the context of “public” personal information. The second challenge flows from the disruption of traditional approaches to privacy based on a collapse of the distinctions between public and private sector actors. The third challenge is that of the potential for open government data—even if anonymized—to contribute to the big data environment in which citizens and their activities are increasingly monitored and profiled.

  10. Four logics of governance

    DEFF Research Database (Denmark)

    Friche, Nanna; Normann Andersen, Vibeke

    and well-being of students enrolled in the VETs must be strengthened. We focus on target 1, 2 and 4. The reform is being implemented in a field of VET that can be characterized by four logics of governance. Firstly, a governance logic characterized by institutional independence of vocational colleges...... combined with state funding through a taximeter scheme (pay per student). Secondly, party governance system involving labor market partners at both national and local level formalized through a national Council for Vocational Training and 50 local trade committees as well as local education committees...... at each college. The third governance logic is based on a decentralized quality management system at each college. Each college has set up its own system of quality developments and quality assurances. The fourth governance logic is performance management conducted by the national level towards...

  11. A new corporate governance

    Directory of Open Access Journals (Sweden)

    Ion Bucur

    2015-12-01

    Full Text Available The issue of corporate governance has become increasingly important as globalisation has begun to accelerate and the economic and financial turmoil have intensified. Post-crisis context has imposed the need to expand the prospects for analysis over governance and companies, as well as the need to identify new ways of administration and resource management. From this perspective, the author aims to highlight the conditions, factors and events that have generated profound changes within the business environment, while the analysis is focusing on contemporary changes in the systems of corporate governance and economic mutations, especially in terms of the companies. The establishment of new governance rules is demanding a theoretical approach based on new methodological requirements which are needed to reform theoretical foundations and to promote creative and effective shapes and governance systems.

  12. A new position sensitive anode for plasmas diagnostic

    Energy Technology Data Exchange (ETDEWEB)

    Grasso, R., E-mail: grasso@lns.infn.it [INFN-Laboratori Nazionali del Sud, Via S. Sofia 62, Catania 95123 (Italy); Centro Siciliano di Fisica Nucleare e Struttura della Materia, Viale A. Doria 6, Catania 95125 (Italy); Tudisco, S. [INFN-Laboratori Nazionali del Sud, Via S. Sofia 62, Catania 95123 (Italy); Centro Siciliano di Fisica Nucleare e Struttura della Materia, Viale A. Doria 6, Catania 95125 (Italy); Anzalone, A. [INFN-Laboratori Nazionali del Sud, Via S. Sofia 62, Catania 95123 (Italy); Musumeci, F.; Scordino, A. [INFN-Laboratori Nazionali del Sud, Via S. Sofia 62, Catania 95123 (Italy); Dipartimento di Fisica ed Astronomia, Universita' di Catania, Viale A. Doria 6, Catania 95125 (Italy); Spitaleri, A. [INFN-Laboratori Nazionali del Sud, Via S. Sofia 62, Catania 95123 (Italy); Anzalone, R.; D’Arrigo, G. [INFN-Laboratori Nazionali del Sud, Via S. Sofia 62, Catania 95123 (Italy); IMM-Istituto per la Microelettronica e Microsistemi, CRN, VIII Strada 5 (Zona Industriale), Catania 95121 (Italy); LaVia, F. [IMM-Istituto per la Microelettronica e Microsistemi, CRN, VIII Strada 5 (Zona Industriale), Catania 95121 (Italy)

    2013-08-21

    The studies of plasmas generated by laser-matter interaction requires detectors that are able to perform the time resolved imaging of photons and charged particles. Such information are necessary in order to characterize the time evolution of fundamental parameters (as temperature, density, etc.) of plasma. One of the key elements of such diagnostics is the position sensitive anode. We are studying a new type of position-sensitive anode which will be realized by using silicon planar technology: a trapezes and stripes resistive anode (TSRA). The new TSRA is a two-dimensional system, which can be coupled with one of two-stage multichannel plates for the particles detection or for photons.

  13. Anode Improvement in Rechargeable Lithium-Sulfur Batteries.

    Science.gov (United States)

    Tao, Tao; Lu, Shengguo; Fan, Ye; Lei, Weiwei; Huang, Shaoming; Chen, Ying

    2017-12-01

    Owing to their theoretical energy density of 2600 Wh kg-1 , lithium-sulfur batteries represent a promising future energy storage device to power electric vehicles. However, the practical applications of lithium-sulfur batteries suffer from poor cycle life and low Coulombic efficiency, which is attributed, in part, to the polysulfide shuttle and Li dendrite formation. Suppressing Li dendrite growth, blocking the unfavorable reaction between soluble polysulfides and Li, and improving the safety of Li-S batteries have become very important for the development of high-performance lithium sulfur batteries. A comprehensive review of various strategies is presented for enhancing the stability of the anode of lithium sulfur batteries, including inserting an interlayer, modifying the separator and electrolytes, employing artificial protection layers, and alternative anodes to replace the Li metal anode. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Novel Non-Carbonate Based Electrolytes for Silicon Anodes

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Ye [Wildcat Discovery Technologies, San Diego, CA (United States); Yang, Johnny [Wildcat Discovery Technologies, San Diego, CA (United States); Cheng, Gang [Wildcat Discovery Technologies, San Diego, CA (United States); Carroll, Kyler [Wildcat Discovery Technologies, San Diego, CA (United States); Clemons, Owen [Wildcat Discovery Technologies, San Diego, CA (United States); Strand, Diedre [Wildcat Discovery Technologies, San Diego, CA (United States)

    2016-09-09

    Substantial improvement in the energy density of rechargeable lithium batteries is required to meet the future needs for electric and plug-in electric vehicles (EV and PHEV). Present day lithium ion battery technology is based on shuttling lithium between graphitic carbon and inorganic oxides. Non-graphitic anodes, such as silicon can provide significant improvements in energy density but are currently limited in cycle life due to reactivity with the electrolyte. Wildcat/3M proposes the development of non-carbonate electrolyte formulations tailored for silicon alloy anodes. Combining these electrolytes with 3M’s anode and an NMC cathode will enable up to a 20% increase in the volumetric cell energy density, while still meeting the PHEV/EV cell level cycle/calendar life goals.

  15. Development of redox stable, multifunctional substrates for anode supported SOFCS

    DEFF Research Database (Denmark)

    Sudireddy, Bhaskar Reddy; Foghmoes, Søren Preben Vagn; Ramos, Tania

    2017-01-01

    Redox stable solid oxide fuel cells are beneficial in many aspects such as tolerance against system failures e.g fuel cut off and emergency shut down, but also allow for higher fuel utilization, which increases efficiency. State-ofthe-art Ni-cermet based anodes suffer from microstructural changes...... with a multifunctional anode support, the development of a two layer fuel electrode based on a redox stable strontium titanate layer for the electrochemically active layer and a redox stable Ni-YSZ support was pursued. Half-cells with well adhearing strontium titante anode layers on stateof-the-art Ni-YSZ cermet...... supports have been achieved. Redox tolerance of the half-cell depends could be increased by optimizing the redox stability of the cermet support....

  16. Anodes for Solid Oxide Fuel Cells Operating at Low Temperatures

    DEFF Research Database (Denmark)

    Abdul Jabbar, Mohammed Hussain

    . On the other hand, low-temperature operation poses serious challenges to the electrode performance. Effective catalysts, redox stable electrodes with improved microstructures are the prime requisite for the development of efficient SOFC anodes. The performance of Nb-doped SrT iO3 (STN) ceramic anodes......An important issue that has limited the potential of Solid Oxide Fuel Cells (SOFCs) for portable applications is its high operating temperatures (800-1000 ºC). Lowering the operating temperature of SOFCs to 400-600 ºC enable a wider material selection, reduced degradation and increased lifetime...... at 400ºC. The potential of using WO3 ceramic as an alternative anode materials has been explored. The relatively high electrode polarization resistance obtained, 11 Ohm cm2 at 600 ºC, proved the inadequate catalytic activity of this system for hydrogen oxidation. At the end of this thesis...

  17. Surface of Alumina Films after Prolonged Breakdowns in Galvanostatic Anodization

    Directory of Open Access Journals (Sweden)

    Christian Girginov

    2011-01-01

    Full Text Available Breakdown phenomena are investigated at continuous isothermal (20∘C and galvanostatic (0.2–5 mA cm−2 anodizing of aluminum in ammonium salicylate in dimethylformamide (1 M AS/DMF electrolyte. From the kinetic (-curves, the breakdown voltage ( values are estimated, as well as the frequency and amplitude of oscillations of formation voltage ( at different current densities. The surface of the aluminum specimens was studied using atomic force microscopy (AFM. Data on topography and surface roughness parameters of the electrode after electric breakdowns are obtained as a function of anodization time. The electrode surface of anodic films, formed with different current densities until the same charge density has passed (2.5 C cm−2, was assessed. Results are discussed on the basis of perceptions of avalanche mechanism of the breakdown phenomena, due to the injection of electrons and their multiplication in the volume of the film.

  18. Voltage-dependent reversal of anodic galvanotaxis in Nyctotherus ovalis.

    Science.gov (United States)

    Van Hoek, A H; Sprakel, V S; Van Alen, T A; Theuvenet, A P; Vogels, G D; Hackstein, J H

    1999-01-01

    Aerobic and anaerobic ciliates swim towards the cathode when they are exposed to a constant DC field. Nyctotherus ovalis from the intestinal tract of cockroaches exhibits a different galvanotactic response: at low strength of the DC field the ciliates orient towards the anode whereas DC fields above 2-4 V/cm cause cathodic swimming. This reversal of the galvanotactic response is not due to backward swimming. Rather the ciliates turn around and orient to the cathode with their anterior pole. Exposure to various cations, chelators, and Ca(2+)-channel inhibitors suggests that Ca(2+)-channels similar to the "long lasting" Ca(2+)-channels of vertebrates are involved in the voltage-dependent anodic galvanotaxis. Evidence is presented that host-dependent epigenetic factors can influence the voltage-threshold for the switch from anodic to cathodic swimming.

  19. Progress in Nano-Engineered Anodic Aluminum Oxide Membrane Development

    Directory of Open Access Journals (Sweden)

    Gerrard Eddy Jai Poinern

    2011-02-01

    Full Text Available The anodization of aluminum is an electro-chemical process that changes the surface chemistry of the metal, via oxidation, to produce an anodic oxide layer. During this process a self organized, highly ordered array of cylindrical shaped pores can be produced with controllable pore diameters, periodicity and density distribution. This enables anodic aluminum oxide (AAO membranes to be used as templates in a variety of nanotechnology applications without the need for expensive lithographical techniques. This review article is an overview of the current state of research on AAO membranes and the various applications of nanotechnology that use them in the manufacture of nano-materials and devices or incorporate them into specific applications such as biological/chemical sensors, nano-electronic devices, filter membranes and medical scaffolds for tissue engineering.

  20. Transnational Governance and Constitutionalism

    DEFF Research Database (Denmark)

    Joerges, Christian; Sand, Inger-Johanne; Teubner, Gunther

    The term transnational governance designates untraditional types of international and regional collaboration among both public and private actors. These legally-structured or less formal arrangements link economic, scientific and technological spheres with political and legal processes. They are ......The term transnational governance designates untraditional types of international and regional collaboration among both public and private actors. These legally-structured or less formal arrangements link economic, scientific and technological spheres with political and legal processes....... They are challenging the type of governance which constitutional states were supposed to represent and ensure. They also provoke old questions: Who bears the responsibility for governance without a government? Can accountability be ensured? The term 'constitutionalism' is still widely identified with statal form...... of democratic governance. The book refers to this term as a yardstick to which then contributors feel committed even where they plead for a reconceptualisation of constitutionalism or a discussion of its functional equivalents. 'Transnational governance' is neither public nor private, nor purely international...

  1. Improved Anode for a Direct Methanol Fuel Cell

    Science.gov (United States)

    Valdez, Thomas; Narayanan, Sekharipuram

    2005-01-01

    A modified chemical composition has been devised to improve the performance of the anode of a direct methanol fuel cell. The main feature of the modified composition is the incorporation of hydrous ruthenium oxide into the anode structure. This modification can reduce the internal electrical resistance of the cell and increase the degree of utilization of the anode catalyst. As a result, a higher anode current density can be sustained with a smaller amount of anode catalyst. These improvements can translate into a smaller fuel-cell system and higher efficiency of conversion. Some background information is helpful for understanding the benefit afforded by the addition of hydrous ruthenium oxide. The anode of a direct methanol fuel cell sustains the electro-oxidation of methanol to carbon dioxide in the reaction CH3OH + H2O--->CO2 + 6H(+) + 6e(-). An electrocatalyst is needed to enable this reaction to occur. The catalyst that offers the highest activity is an alloy of approximately equal numbers of atoms of the noble metals platinum and ruthenium. The anode is made of a composite material that includes high-surface-area Pt/Ru alloy particles and a proton-conducting ionomeric material. This composite is usually deposited onto a polymer-electrolyte (proton-conducting) membrane and onto an anode gas-diffusion/current-collector sheet that is subsequently bonded to the proton-conducting membrane by hot pressing. Heretofore, the areal density of noble-metal catalyst typically needed for high performance has been about 8 mg/cm2. However, not all of the catalyst has been utilized in the catalyzed electro-oxidation reaction. Increasing the degree of utilization of the catalyst would make it possible to improve the performance of the cell for a given catalyst loading and/or reduce the catalyst loading (thereby reducing the cost of the cell). The use of carbon and possibly other electronic conductors in the catalyst layer has been proposed for increasing the utilization of the

  2. Anodic oxidation of stilbenes bearing electron-withdrawing ring substituents

    Energy Technology Data Exchange (ETDEWEB)

    Halas, Summer M.; Okyne, Kwame; Fry, Albert J

    2003-06-15

    A number of disubstituted stilbenes bearing either two strong electron-withdrawing groups or one electron-withdrawing and one electron-donating group were synthesized and anodically oxidized in a divided cell in methanol at a carbon anode. A variety of types of products were obtained, most of which have never been observed upon oxidation of alkenes not bearing electron-withdrawing groups. A mechanistic scheme involving 2-methoxy-1,2-diarylethyl cations as key intermediates can account for all of the observed products. The nature of the products from each alkene is strongly correlated with the sum of the Hammett {sigma}{sup +} values of the ring substituents.

  3. Composite anodes for lithium-ion batteries: status and trends

    Directory of Open Access Journals (Sweden)

    Christian M. Julien

    2016-07-01

    Full Text Available Presently, the negative electrodes of lithium-ion batteries (LIBs is constituted by carbon-based materials that exhibit a limited specific capacity 372 mAh g−1 associated with the cycle between C and LiC6. Therefore, many efforts are currently made towards the technological development nanostructured materials in which the electrochemical processes occurs as intercalation, alloying or conversion reactions with a good accommodation of dilatation/contraction during cycling. In this review, attention is focused on advanced anode composite materials based on carbon, silicon, germanium, tin, titanium and conversion anode composite based on transition-metal oxides.

  4. Cylindrical Three-Dimensional Porous Anodic Alumina Networks

    Directory of Open Access Journals (Sweden)

    Pedro M. Resende

    2016-11-01

    Full Text Available The synthesis of a conformal three-dimensional nanostructure based on porous anodic alumina with transversal nanopores on wires is herein presented. The resulting three-dimensional network exhibits the same nanostructure as that obtained on planar geometries, but with a macroscopic cylindrical geometry. The morphological analysis of the nanostructure revealed the effects of the initial defects on the aluminum surface and the mechanical strains on the integrity of the three-dimensional network. The results evidence the feasibility of obtaining 3D porous anodic alumina on non-planar aluminum substrates.

  5. Tin-phosphate glass anode for sodium ion batteries

    Directory of Open Access Journals (Sweden)

    Tsuyoshi Honma

    2013-11-01

    Full Text Available The electrochemical property of tin-phosphate (designate as GSPO glass anode for the sodium ion battery was studied. During the first charge process, sodium ion diffused into GSPO glass matrix and due to the reduction of Sn2+ to Sn0 state sodiated tin metal nano-size particles are formed in oxide glass matrix. After the second cycle, we confirmed the steady reversible reaction ∼320 mAh/g at 0–1 V cutoff voltage condition by alloying process in NaxSn4. The tin-phosphate glass is a promising candidate of new anode active material that realizes high energy density sodium ion batteries.

  6. Electronic properties of lithiated SnO-based anode materials

    Science.gov (United States)

    Bauer, Dominik; Bunjaku, Teutë; Pedersen, Andreas; Luisier, Mathieu

    2017-08-01

    In this paper, we use an ab-initio quantum transport approach to study the electron current flowing through lithiated SnO anodes for potential applications in Li-ion batteries. By investigating a set of lithiated structures with varying lithium concentrations, it is revealed that Lix SnO can be a good conductor, with values comparable to bulk β-Sn and Li. A deeper insight into the current distribution indicates that electrons preferably follow specific trajectories, which offer superior conducting properties than others. These channels have been identified and it is shown here how they can enhance or deteriorate the current flow in lithiated anode materials.

  7. Mediatization and Government Communication

    DEFF Research Database (Denmark)

    Laursen, Bo; Valentini, Chiara

    2015-01-01

    in the light of mediatization and government communication theories. Without one pan-European public sphere, the European Parliament, like the other European Union (EU) institutions, competes with national actors for the news media’s attention in the EU’s twenty-eight national public spheres, where EU affairs......” in their communication efforts, and that they face a daily professional challenge as they attempt to promote the European Parliament and its activities to the news media in a way that will not compromise their credibility as government sources. The study provides new insights into communicative aspects of EU governance...

  8. Ambidextrous IT Governance

    DEFF Research Database (Denmark)

    Andersen, Peter; Svejvig, Per; Tordrup Heeager, Lise

    2017-01-01

    Through a case study at a global technology company, we investigate how organizations can adapt their IT governance approach to the information system at hand. This is done by considering the degree of information system integration and whether the system is related to supporting operational...... efficiency (exploitation) or innovation (exploration). Based on the findings of the case study, we introduce the concept of ambidextrous IT governance to describe how IT governance can be adapted to fit the dual needs of both exploration and exploitation through the use of IS....

  9. Effect of Sulfur and Hydrocarbon Fuels on Titanate/Ceria SOFC Anodes

    Energy Technology Data Exchange (ETDEWEB)

    Marina, O.A.; Pedersen, L.R.; Stevenson, J.W.

    2005-01-27

    The purpose of the project is to develop low-cost, high-performance anodes that offer low polarization resistance as well as improved tolerance for nonidealities in anode environment such as redox cycles, sulfur and other poisons, and hydrocarbons.

  10. Depolarized SnO2-based gas anodes for electrowinning of silver in molten chlorides

    Directory of Open Access Journals (Sweden)

    Xiao S.

    2013-01-01

    Full Text Available SnO2-based porous anodes were prepared and the behavior of gas bubbles on the porous anodes with different original coarse grain size, immersed in ethanol to simulate molten chlorides, was primarily investigated. SnO2-based porous anodes were used as gas anodes for the electrowinning of silver in CaCl2-NaCl-CaO-AgCl melts at 680°C. Hydrogen was introduced to the anode/electrolyte interface through the gas anode. Carbon was used as the cathode. Obvious depolarization of the anode potential was observed after the introduction of hydrogen comparing with no reducing gas introduced, indicating the involvement of hydrogen in the anode reaction. Metallic silver was deposited on the cathode.

  11. Microstructure and optical appearance of anodized friction stir processed Al - Metal oxide surface composites

    DEFF Research Database (Denmark)

    Gudla, Visweswara Chakravarthy; Jensen, Flemming; Bordo, Kirill

    2014-01-01

    Multiple-pass friction stir processing (FSP) was employed to impregnate Ti, Y and Ce oxide powders into the surface of an Aluminium alloy. The FSP processed surface composite was subsequently anodized with an aim to develop optical effects in the anodized layer owing to the presence of incorporated...... process. The effect of anodizing parameters on the optical appearance of the anodized surface was studied. Characterization was performed using FIB-SEM and TEM. The surface appearance was analysed using spectrophotometry technique which measures the diffuse and total reflectance of the surface....... The appearance of the anodized surface changed from dark to bright upon increasing the anodizing voltage. Particles in the FSP zone were partially or completely modified during the anodizing process and modified the morphology of the surrounding anodized Al matrix which has a clear influence on the mechanism...

  12. Mesoporous Silicon-Based Anodes for High Capacity, High Performance Li-ion Batteries Project

    Data.gov (United States)

    National Aeronautics and Space Administration — A new high capacity anode composite based on mesoporous silicon is proposed. By virtue of a structure that resembles a pseudo one-dimensional phase, the active anode...

  13. Effects of sodium tartrate anodizing on fatigue life of TA15 titanium alloy

    Directory of Open Access Journals (Sweden)

    Fu Chunjuan

    2015-08-01

    Full Text Available Anodizing is always used as an effective surface modification method to improve the corrosion resistance and wear resistance of titanium alloy. The sodium tartrate anodizing is a new kind of environmental anodizing method. In this work, the effects of sodium tartrate anodizing on mechanical property were studied. The oxide film was performed on the TA15 titanium alloy using sodium tartrate as the film former. The effects of this anodizing and the traditional acid anodizing on the fatigue life of TA15 alloy were compared. The results show that the sodium tartrate anodizing just caused a slight increase of hydrogen content in the alloy, and had a slight effect on the fatigue life. While, the traditional acid anodizing caused a significant increase of hydrogen content in the substrate and reduced the fatigue life of the alloy significantly.

  14. Determination of sub-micromolar amounts of sulfide by standard free anodic stripping voltammetry and anodic stripping voltammetric titration.

    Science.gov (United States)

    Titova, T V; Borisova, N S; Zakharchuk, N F

    2009-10-27

    A novel electrochemical methods namely standard free anodic stripping voltammetry and anodic stripping voltammetric titration are proposed for determination of dissolved sulfide concentration. 2Ag(+) + S(2-) --> Ag(2)S reaction is used to provide the information. The anodic stripping voltammetric response of unreacted silver-ions at the glassy carbon electrode is used as analytical signal. Results reliability and accuracy are confirmed by analysis of model solutions, spiked natural and tap waters and recovery study, with a recovery of 100 +/- 5% (n=7) obtained. The approaches show the detection limit (3sigma(blank)) of 2-5x10(-10) mol L(-1) and the relative standard deviation of 2-5% for repeated measurements.

  15. Advanced Mg-Mn-Ca sacrificial anode materials for cathodic protection

    Energy Technology Data Exchange (ETDEWEB)

    Kim, J.G.; Kim, Y.W. [Sungkyunkwan Univ. (Korea). Dept. of Metallurgical Engineering

    2001-02-01

    Addition of calcium to the Mg-Mn sacrificial anodes enhanced the anode efficiency by promoting the uniformly distributed corrosion along the grain boundaries and increased the driving potential by intrinsic electronegative potential of {alpha}-Mg. The reason for the uniform intergranular corrosion is that Mg{sub 2}Ca precipitate (cathode) at grain boundaries is galvanically coupled to {alpha}-Mg matrix (anode). Larger anodic area limits the localized nature of the intergranular attack. (orig.)

  16. Lean Government Methods Guide

    Science.gov (United States)

    This Guide focuses primarily on Lean production, which is an organizational improvement philosophy and set of methods that originated in manufacturing but has been expanded to government and service sectors.

  17. Codes of Good Governance

    DEFF Research Database (Denmark)

    Beck Jørgensen, Torben; Sørensen, Ditte-Lene

    2013-01-01

    Good governance is a broad concept used by many international organizations to spell out how states or countries should be governed. Definitions vary, but there is a clear core of common public values, such as transparency, accountability, effectiveness, and the rule of law. It is quite likely......, however, that national views of good governance reflect different political cultures and institutional heritages. Fourteen national codes of conduct are analyzed. The findings suggest that public values converge and that they match model codes from the United Nations and the European Council as well...... as conceptions of good governance from other international organizations. While values converge, they are balanced and communicated differently, and seem to some extent to be translated into the national cultures. The set of global public values derived from this analysis include public interest, regime dignity...

  18. Sustainability : Politics and governance

    NARCIS (Netherlands)

    Heinrichs, Harald; Biermann, Frank

    2016-01-01

    he article gives an overview of global sustainability policy and politics. It is shown how international policy making on sustainable development has progressed from environmental policy toward recent approaches of Earth system governance. Key challenges of international sustainability politics are

  19. Government Risk-Bearing

    CERN Document Server

    1993-01-01

    The u.s. government bulks large in the nation's financial markets. The huge volume of government-issued and -sponsored debt affects the pricing and volume ofprivate debt and, consequently, resource allocation between competing alternatives. What is often not fully appreciated is the substantial influence the federal government wields overresource allocation through its provisionofcreditandrisk-bearing services to the private economy. Because peopleand firms generally seekto avoid risk, atsomeprice they are willing to pay another party to assume the risk they would otherwise face. Insurance companies are a class of private-sector firms one commonly thinks of as providing these services. As the federal government has expanded its presence in the U.S. economy during this century, it has increasingly developed programs aimed at bearing risks that the private sector either would not take on at any price, or would take on but atapricethoughtto besogreatthatmostpotentialbeneficiarieswouldnotpurchase the coverage. To...

  20. Governing the Conflicted Commons

    DEFF Research Database (Denmark)

    Sareen, Siddharth

    that presents a comprehensive overview and synthesis. Article 1 shows what nurtures democratisation using three dimensions of democratic practice: functional democratic institutions, people’s involvement with these institutions, and inclusive participation without co-option of decision-making and resources...... governance in Jharkhand, and (iii) what does local governance look like in practice in this state-building context? In the form of three research articles that prioritise the local impact of government action, it addresses specific versions of these research questions, namely: (i) What nurtures...... of government services is studied in three villages in West Singhbhum. One example is the regulation of trade in a non-wood forest product called the kendu leaf which is valuable for its use in rolling country cigarettes, while the other is a public scheme to provide minimum-wage labour work to every village...

  1. Enacting Governance through Strategy

    DEFF Research Database (Denmark)

    Brandtner, Christof; Höllerer, Markus A.; Meyer, Renate E.

    2017-01-01

    of strategy documents in city administration addresses these challenges. Our central claim is that strategy documents can be understood as a distinct discursive device through which local governments enact aspired governance configurations. We illustrate our argument empirically using two prominent examples...... that, while showing similar features and characteristics, are anchored in different administrative traditions and institutional frameworks: the city administrations of Sydney, Australia, and Vienna, Austria. The contribution of the paper is to show how strategy documents enact governance configurations...... along four core dimensions: the setting in space and time, the definition of the public, the framing of the res publica and legitimacy issues. Moreover, our comparative analysis of Sydney and Vienna gives evidence of differences in governance configurations enacted through strategy documents....

  2. Transgovernance: advancing sustainability governance

    National Research Council Canada - National Science Library

    Meuleman, Louis

    2013-01-01

    ... – together characterized as the emergence of a knowledge democracy – may imply for governance for sustainable development, on global and other levels of societal decision making, and the other way around...

  3. Tactics of the governed

    DEFF Research Database (Denmark)

    Rasmussen, Mattias Borg

    2017-01-01

    Abandonment has become a performative idiom in Andean Peru, where it retains its purchase despite the investments of the state. Local development is tied to the desire to be governed. In spite of prolonged state presence, the villages’ relationship to authorities is continuously and persistently ...... morally grounded claims to local authorities. The idiom of abandonment is therefore both effective and affective as a critique of governance and a claim to citizenship.......Abandonment has become a performative idiom in Andean Peru, where it retains its purchase despite the investments of the state. Local development is tied to the desire to be governed. In spite of prolonged state presence, the villages’ relationship to authorities is continuously and persistently...... figured as one of abandonment: villages are abandoned because someone is deliberately holding them in such unfortunate conditions. To figure abandonment in village politics is to draw on this idiom as an effective means of both communicating the historical experience of governance and putting forward...

  4. 77 FR 18258 - Government-to-Government Telephonic Consultation Meetings

    Science.gov (United States)

    2012-03-27

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF THE INTERIOR National Park Service Government-to-Government Telephonic Consultation Meetings AGENCY: National Park Service, Interior. SUMMARY: The National Park Service announces two telephonic government- to-government...

  5. Tension-filled Governance?

    DEFF Research Database (Denmark)

    Celik, Tim Holst

    on the statesituated tension-filled functional relationship between legitimation and accumulation, the study both historically and theoretically reworks this approach and reapplies it for the post-1970s/1990s governance period. It asks whether and to what extent governance has served as a distinctive post- 1970s/1990s...... state-facilitated way of bridging/altering the tension-filled relationship between legitimation and fiscal accumulation in Western European liberal-capitalist democratic polities....

  6. World Government: Utopia?

    OpenAIRE

    Vahram Ayvazyan

    2012-01-01

    The aim of this paper is to analyze the possibility of having a world government, which world has been facing overarching changes since the end of Cold war, where bipolar world order has evolved into multipolar system through unipolarity. Analysis method in this paper have the sistematics: discussion of human nature and philosophical dimensions vis-à-vis individual, society and government, as well as society of societies; then briefly analyse globalization, the impact of individuals on inter...

  7. Corporate Governance Models

    OpenAIRE

    Petre Brezeanu; Andrei Stănculescu

    2008-01-01

    In essence, the concept of corporate governance refers to the coordination of interests of the various stakeholders of the company: shareholders, managers, employees, creditors, customers, suppliers, state, etc. In every company’s environment there is a set of specific relationships between the physical or legal persons who have an interest (“stake”) in the business. In pursuit of entrepreneurial activity, the management or the governance of the company must take into account the inherent con...

  8. The first Government House

    OpenAIRE

    Kelso, Jane

    2017-01-01

    The first Government House was not a simple singular structure but a complex with a yard, outbuildings, guardhouse, garden and great domain. It was a home, and office and a venue for public and private entertaining, but also a symbol of British authority, with all that that meant to different people, both then and now. A place of intimacy and officaldom, birth and death, celebration, confrontation and reconciliation, the first Government House was the scene of significant moments in the young...

  9. Competence, governance, and entrepreneurship

    DEFF Research Database (Denmark)

    Foss, Nicolai Juul; Mahnke, Volker

    , what determines their boundaries and internal organization), but would also be helpful for informing strategy issues, such as understanding strategic flexibility, strategic options, and the sources of competitive advantage. This volume brings together prominent voices on competence, governance......This title illustrates modern economics. Because it informs strategic choices, it is relevant to business administration in general, and for strategic management in particular. Two dominant streams may be identified in the literature, namely the "competence" and "governance" perspectives...

  10. Open Government and (Linked (Open (Government (Data

    Directory of Open Access Journals (Sweden)

    Christian Philipp Geiger

    2012-12-01

    Full Text Available This article explores the opening and the free usage of stored public sector data, supplied by state. In the age of Open Government and Open Data it’s not enough just to put data online. It should be rather weighed out whether, how and which supplied public sector data can be published. Open Data are defined as stored data which could be made accessible in a public interest without any restrictions for usage and distribution. These Open Data can possibly be statistics, geo data, maps, plans, environmental data and weather data in addition to materials of the parliaments, ministries and authorities. The preparation and the free access to existing data permit varied approaches to the reuse of data, discussed in the article. In addition, impulses can be given for Open Government – the opening of state and administration, to more transparency, participation and collaboration as well as to innovation and business development. The Open Data movement tries to get to the bottom of current publication processes in the public sector which could be formed even more friendly to citizens and enterprises.

  11. 46 CFR 35.01-25 - Sacrificial anode installations-TB/ALL.

    Science.gov (United States)

    2010-10-01

    ... submitted for approval. The anode should be magnesium free and the silicon content limited to trace amounts... 46 Shipping 1 2010-10-01 2010-10-01 false Sacrificial anode installations-TB/ALL. 35.01-25 Section... Operating Requirements § 35.01-25 Sacrificial anode installations—TB/ALL. (a) The installation of magnesium...

  12. The corrosion protection of several aluminum alloys by chromic acid and sulfuric acid anodizing

    Science.gov (United States)

    Danford, M. D.

    1994-01-01

    The corrosion protection afforded 7075-T6, 7075-T3, 6061-T6, and 2024-T3 aluminum alloys by chromic acid and sulfuric acid anodizing was examined using electrochemical techniques. From these studies, it is concluded that sulfuric acid anodizing provides superior corrosion protection compared to chromic acid anodizing.

  13. In situ observations of microstructural changes in SOFC anodes during redox cycling

    DEFF Research Database (Denmark)

    Klemensø, Trine; Appel, C. C.; Mogensen, Mogens Bjerg

    2006-01-01

    The anode-supported solid oxide fuel cell (SOFC) degrades when the anode is subjected to redox cycling. The degradation has qualitatively been related to microstructural changes in the nickel-yttria stabilized zirconia anode of the tested cells. In this work, the microstructural changes were...

  14. The effect of zinc on the aluminum anode of the aluminum-air battery

    Science.gov (United States)

    Tang, Yougen; Lu, Lingbin; Roesky, Herbert W.; Wang, Laiwen; Huang, Baiyun

    Aluminum is an ideal material for batteries, due to its excellent electrochemical performance. Herein, the effect of zinc on the aluminum anode of the aluminum-air battery, as an additive for aluminum alloy and electrolytes, has been studied. The results show that zinc can decrease the anodic polarization, restrain the hydrogen evolution and increase the anodic utilization rate.

  15. The impact of anode design on fuel crossover of direct ethanol fuel cell

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 39; Issue 1. The impact of anode design on fuel ... Keywords. Fuel cell; PEM; ethanol; anode design; fuel crossover; characterization. ... In the present work, Pt–Pd nanocomposites were fused so as to find its impact on the anode design of DEFC. The current paper ...

  16. kinetics and mechanism of long-range pore ordering in anodic films on aluminium

    NARCIS (Netherlands)

    Napolskii, K.S.; Roslyakov, I. V.; Eliseev, A.A.; Byelov, D.|info:eu-repo/dai/nl/298392720; Petukhov, A.V.|info:eu-repo/dai/nl/304829196; Grigoryeva, N.A.; Bouwman, W.G.; Lukashin, A.V.; Chumakov, A. P.; Grigoriev, S.V.

    2011-01-01

    Anodic aluminum oxide has unique and highly attractive properties, including self-ordering of porous structure during anodization. Although anodization regimes leading to formation of highly ordered porous structures had been found experimentally, many aspects of the self-organization mechanism

  17. Bending-Tolerant Anodes for Lithium-Metal Batteries.

    Science.gov (United States)

    Wang, Aoxuan; Tang, Shan; Kong, Debin; Liu, Shan; Chiou, Kevin; Zhi, Linjie; Huang, Jiaxing; Xia, Yong-Yao; Luo, Jiayan

    2018-01-01

    Bendable energy-storage systems with high energy density are demanded for conformal electronics. Lithium-metal batteries including lithium-sulfur and lithium-oxygen cells have much higher theoretical energy density than lithium-ion batteries. Reckoned as the ideal anode, however, Li has many challenges when directly used, especially its tendency to form dendrite. Under bending conditions, the Li-dendrite growth can be further aggravated due to bending-induced local plastic deformation and Li-filaments pulverization. Here, the Li-metal anodes are made bending tolerant by integrating Li into bendable scaffolds such as reduced graphene oxide (r-GO) films. In the composites, the bending stress is largely dissipated by the scaffolds. The scaffolds have increased available surface for homogeneous Li plating and minimize volume fluctuation of Li electrodes during cycling. Significantly improved cycling performance under bending conditions is achieved. With the bending-tolerant r-GO/Li-metal anode, bendable lithium-sulfur and lithium-oxygen batteries with long cycling stability are realized. A bendable integrated solar cell-battery system charged by light with stable output and a series connected bendable battery pack with higher voltage is also demonstrated. It is anticipated that this bending-tolerant anode can be combined with further electrolytes and cathodes to develop new bendable energy systems. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Pd/Ni-WO3 anodic double layer gasochromic device

    Science.gov (United States)

    Lee, Se-Hee; Tracy, C. Edwin; Pitts, J. Roland; Liu, Ping

    2004-04-20

    An anodic double layer gasochromic sensor structure for optical detection of hydrogen in improved response time and with improved optical absorption real time constants, comprising: a glass substrate; a tungsten-doped nickel oxide layer coated on the glass substrate; and a palladium layer coated on the tungsten-doped nickel oxide layer.

  19. Effect of anodization on corrosion behaviour and biocompatibility of ...

    Indian Academy of Sciences (India)

    Abstract. The objective of this investigation is to study the effectiveness of anodized surface of commercial purity titanium (Cp-Ti) on its corrosion behaviour in simulated body fluid (SBF) and proliferation of osteoblast cells on it, to assess its potentiality as a process of surface modification in enhancing corrosion resistance ...

  20. A review of liquid metal anode solid oxide fuel cells

    Directory of Open Access Journals (Sweden)

    ALIYA TOLEUOVA

    2013-06-01

    Full Text Available This review discusses recent advances in a solid oxide fuel cell (SOFC variant that uses liquid metal electrodes (anodes with the advantage of greater fuel tolerance and the ability to operate on solid fuel. Key features of the approach are discussed along with the technological and research challenges that need to be overcome for scale-up and commercialisation.

  1. Ceria Electrocatalysis Compared to Nickel Using Pattern Anodes

    NARCIS (Netherlands)

    Patel, H.C.; Biradar, N.; Venkataraman, V.; Aravind, P.V.

    2014-01-01

    Ceria and nickel pattern anodes are prepared and tested in order to gain a fundamental insight into the electrochemical oxidation of hydrogen on either of these surfaces. It is found that ceria is highly active towards electrochemical oxidation of hydrogen with lower polarisation resistance because

  2. Fabrication of Porous Anodic Alumina with Ultrasmall Nanopores

    Directory of Open Access Journals (Sweden)

    Ding GuQiao

    2010-01-01

    Full Text Available Abstract Anodization of Al foil under low voltages of 1–10 V was conducted to obtain porous anodic aluminas (PAAs with ultrasmall nanopores. Regular nanopore arrays with pore diameter 6–10 nm were realized in four different electrolytes under 0–30°C according to the AFM, FESEM, TEM images and current evolution curves. It is found that the pore diameter and interpore distance, as well as the barrier layer thickness, are not sensitive to the applied potentials and electrolytes, which is totally different from the rules of general PAA fabrication. The brand-new formation mechanism has been revealed by the AFM study on the samples anodized for very short durations of 2–60 s. It is discovered for the first time that the regular nanoparticles come into being under 1–10 V at the beginning of the anodization and then serve as a template layer dominating the formation of ultrasmall nanopores. Under higher potentials from 10 to 40 V, the surface nanoparticles will be less and less and nanopores transform into general PAAs.

  3. Synthesis and characterization of anodized titanium-oxide nanotube arrays

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Michael Z. [ORNL; Lai, Peng [University of Cincinnati; Bhuiyan, Md S [ORNL; Tsouris, Costas [ORNL; Gu, Baohua [ORNL; Paranthaman, Mariappan Parans [ORNL; Gabitto, Jorge [Prairie View A& M University; Harrison, L. D. [Prairie View A& M University

    2009-01-01

    Anodized titanium-oxide containing highly ordered, vertically oriented TiO2 nanotube arrays is a nanomaterial architecture that shows promise for diverse applications. In this paper, an anodization synthesis using HF-free aqueous solution is described. The anodized TiO2 film samples (amorphous, anatase, and rutile) on titanium foils were characterized with scanning electron microscopy, X-ray diffraction, and Raman spectroscopy. Additional characterization in terms of photocurrent generated by an anode consisting of a titanium foil coated by TiO2 nanotubes was performed using an electrochemical cell. A platinum cathode was used in the electrochemical cell. Results were analyzed in terms of the efficiency of the current generated, defined as the ratio of the difference between the electrical energy output and the electrical energy input divided by the input radiation energy, with the goal of determining which phase of TiO2 nanotubes leads to more efficient hydrogen production. It was determined that the anatase crystalline structure converts light into current more efficiently and is therefore a better photocatalytic material for hydrogen production via photoelectrochemical splitting of water.

  4. Sulfur tolerant molten carbonate fuel cell anode and process

    Science.gov (United States)

    Remick, Robert J.

    1990-01-01

    Molten carbonate fuel cell anodes incorporating a sulfur tolerant carbon monoxide to hydrogen water-gas-shift catalyst provide in situ conversion of carbon monoxide to hydrogen for improved fuel cell operation using fuel gas mixtures of over about 10 volume percent carbon monoxide and up to about 10 ppm hydrogen sulfide.

  5. Aerogel and xerogel composites for use as carbon anodes

    Science.gov (United States)

    Cooper, John F [Oakland, CA; Tillotson, Thomas M [Tracy, CA; Hrubesh, Lawrence W [Pleasanton, CA

    2008-08-12

    Disclosed herein are aerogel and xerogel composite materials suitable for use as anodes in fuel cells and batteries. Precursors to the aerogel and xerogel compounds are infused with inorganic polymeric materials or carbon particles and then gelled. The gels are then pyrolyzed to form composites with internal structural support.

  6. Prelithiated silicon nanowires as an anode for lithium ion batteries.

    Science.gov (United States)

    Liu, Nian; Hu, Liangbing; McDowell, Matthew T; Jackson, Ariel; Cui, Yi

    2011-08-23

    Silicon is one of the most promising anode materials for the next-generation high-energy lithium ion battery (LIB), while sulfur and some other lithium-free materials have recently shown high promise as cathode materials. To make a full battery out of them, either the cathode or the anode needs to be prelithiated. Here, we present a method for prelithiating a silicon nanowire (SiNW) anode by a facile self-discharge mechanism. Through a time dependence study, we found that 20 min of prelithiation loads ∼50% of the full capacity into the SiNWs. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) studies show that the nanostructure of SiNWs is maintained after prelithiation. We constructed a full battery using our prelithiated SiNW anode with a sulfur cathode. Our work provides a protocol for pairing lithium-free electrodes to make the next-generation high-energy LIB. © 2011 American Chemical Society

  7. Spark protection layers for CMOS pixel anode chips in MPGDs

    NARCIS (Netherlands)

    Bilevych, Y.; Bilevych, Y.; Blanco Carballo, V.M.; Chefdeville, M.A.; Colas, P.; Delagnes, E.; Fransen, M.; van der Graaff, H.; Koppert, W.J.C.; Melai, J.; Salm, Cora; Schmitz, Jurriaan; Timmermans, J.; Timmermans, J.; Wyrsch, N.

    2011-01-01

    In this work we have investigated the functioning of high resistivity amorphous silicon and silicon-rich nitride layers as a protection against discharges in Micro-Patterned Gaseous Detectors (MPGDs).When the anode is protected by a high resistivity layer, discharge signals are limited in charge. A

  8. [Corrosion resistant properties of different anodized microtopographies on titanium surfaces].

    Science.gov (United States)

    Fangjun, Huo; Li, Xie; Xingye, Tong; Yueting, Wang; Weihua, Guo; Weidong, Tian

    2015-12-01

    To investigate the corrosion resistant properties of titanium samples prepared by anodic oxidation with different surface morphologies. Pure titanium substrates were treated by anodic oxidation to obtain porous titanium films in micron, submicron, and micron-submicron scales. The surface morphologies, coating cross-sectional morphologies, crystalline structures, and surface roughness of these samples were characterized. Electrochemical technique was used to measure the corrosion potential (Ecorr), current density of corrosion (Icorr), and polarization resistance (Rp) of these samples in a simulated body fluid. Pure titanium could be modified to exhibit different surface morphologies by the anodic oxidation technique. The Tafel curve results showed that the technique can improve the corrosion resistance of pure titanium. Furthermore, the corrosion resistance varied with different surface morphologies. The submicron porous surface sample demonstrated the best corrosion resistance, with maximal Ecorr and Rp and minimal Icorr. Anodic oxidation technology can improve the corrosion resistance of pure titanium in a simulated body fluid. The submicron porous surface sample exhibited the best corrosion resistance because of its small surface area and thick barrier layer.

  9. Anodically generated manganese (III) sulphate for the oxidation of ...

    Indian Academy of Sciences (India)

    Anodically generated manganese(III) sulphate for the oxidation of dipeptides in aqueous sulphuric acid medium: A kinetic study. M N Kumara D Channe ... The effects of varying the dielectric constant of the medium and addition of anions such as sulphate, chloride and perchlorate were studied. The activation parameters ...

  10. Thermal radiation shielding by nanoporous membranes based on anodic alumina

    Science.gov (United States)

    Muratova, E. N.; Matyushkin, L. B.; Moshnikov, V. A.; Chernyakova, K. V.; Vrublevsky, I. A.

    2017-07-01

    The paper is devoted to infrared thermography studies of nanoporous alumina membranes with various geometric parameters of the porous layer: its thickness and average pore diameter. Thermal radiation shielding by anodic alumina membranes is presented. The result obtained showed that nanoporous alumina membranes can be used as heat shields to smooth contrast of thermal radiation of the object and the surrounding background.

  11. Prelithiated Silicon Nanowires as an Anode for Lithium Ion Batteries

    KAUST Repository

    Liu, Nian

    2011-08-23

    Silicon is one of the most promising anode materials for the next-generation high-energy lithium ion battery (LIB), while sulfur and some other lithium-free materials have recently shown high promise as cathode materials. To make a full battery out of them, either the cathode or the anode needs to be prelithiated. Here, we present a method for prelithiating a silicon nanowire (SiNW) anode by a facile self-discharge mechanism. Through a time dependence study, we found that 20 min of prelithiation loads ∼50% of the full capacity into the SiNWs. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) studies show that the nanostructure of SiNWs is maintained after prelithiation. We constructed a full battery using our prelithiated SiNW anode with a sulfur cathode. Our work provides a protocol for pairing lithium-free electrodes to make the next-generation high-energy LIB. © 2011 American Chemical Society.

  12. Recovery of Silver and Gold from Copper Anode Slimes

    Science.gov (United States)

    Chen, Ailiang; Peng, Zhiwei; Hwang, Jiann-Yang; Ma, Yutian; Liu, Xuheng; Chen, Xingyu

    2015-02-01

    Copper anode slimes, produced from copper electrolytic refining, are important industrial by-products containing several valuable metals, particularly silver and gold. This article provides a comprehensive overview of the development of the extraction processes for recovering silver and gold from conventional copper anode slimes. Existing processes, namely pyrometallurgical processes, hydrometallurgical processes, and hybrid processes involving the combination of pyrometallurgical and hydrometallurgical technologies, are discussed based in part on a review of the form and characteristics of silver and gold in copper anode slimes. The recovery of silver and gold in pyrometallurgical processes is influenced in part by the slag and matte/metal chemistry and related characteristics, whereas the extraction of these metals in hydrometallurgical processes depends on the leaching reagents used to break the structure of the silver- and gold-bearing phases, such as selenides. By taking advantage of both pyrometallurgical and hydrometallurgical techniques, high extraction yields of silver and gold can be obtained using such combined approaches that appear promising for efficient extraction of silver and gold from copper anode slimes.

  13. Evaluation of oxide ceramics as anodes for SOECs.

    Science.gov (United States)

    Egger, A; Schrödl, N; Sitte, W

    2015-01-01

    La2NiO(4+δ) is characterised as an example for a potential anode material for high-temperature solid oxide electrolyser cells (SOECs). Short-term characterisation is performed from 700 °C to 850 °C between 0.01 and 1 bar oxygen partial pressure (pO2) on asymmetrical cells using Ce(0.9)Gd(0.1)O(2-δ) as the electrolyte. Long-term degradation studies over more than 3000 hours are conducted at 800 °C and 0.2 bar pO2 in dry and humid atmospheres with and without a Cr-source placed in close vicinity to the cell. The SOEC anode performance is investigated by current-voltage curves combined with impedance spectroscopy. Current densities of up to -410 mA cm(-2) are applied in current-voltage measurements and during long-term degradation studies. A total increase in anode resistance by 350% is observed over the course of the degradation measurements in an increasingly harsh environment. Post-test analyses by SEM/EDX on a polished cross section of the cell show the presence of several contaminants in the electrode structure. However, chromium has not been identified by EDX even after prolonged exposure to Cr-sources in humid atmospheres, which is attributed to the anodic polarisation of the electrode. Electrode delamination appears to be the main factor for the strong loss in performance.

  14. Novel Ceramic Materials for Polymer Electrolyte Membrane Water Electrolysers' Anodes

    DEFF Research Database (Denmark)

    Polonsky, J.; Bouzek, K.; Prag, Carsten Brorson

    2012-01-01

    Tantalum carbide was evaluated as a possible new support for the IrO2 for use in anodes of polymer electrolyte membrane water electrolysers. A series of supported electrocatalysts varying in mass content of iridium oxide was prepared. XRD, powder conductivity measurements and cyclic and linear...

  15. The corrosion protection of aluminum by various anodizing treatments

    Science.gov (United States)

    Danford, Merlin D.

    1989-01-01

    Corrosion protection to 6061-T6 aluminum, afforded by both teflon-impregnated anodized coats (Polylube and Tufram) and hard-anodized coats (water sealed and dichromate sealed), was studied at both pH 5.5 and pH 9.5, with an exposure period of 28 days in 3.5 percent NaCl solution (25 C) for each specimen. In general, corrosion protection for all specimens was better at pH 9.5 than at pH 5.5. Protection by a Tufram coat proved superior to that afforded by Polylube at each pH, with corrosion protection by the hard-anodized, water-sealed coat at pH 9.5 providing the best protection. Electrochemical work in each case was corroborated by microscopic examination of the coats after exposure. Corrosion protection by Tufram at pH 9.5 was most comparable to that of the hard-anodized samples, although pitting and some cracking of the coat did occur.

  16. Optimal Set Anode Potentials Vary in Bioelectrochemical Systems

    KAUST Repository

    Wagner, Rachel C.

    2010-08-15

    In bioelectrochemical systems (BESs), the anode potential can be set to a fixed voltage using a potentiostat, but there is no accepted method for defining an optimal potential. Microbes can theoretically gain more energy by reducing a terminal electron acceptor with a more positive potential, for example oxygen compared to nitrate. Therefore, more positive anode potentials should allow microbes to gain more energy per electron transferred than a lower potential, but this can only occur if the microbe has metabolic pathways capable of capturing the available energy. Our review of the literature shows that there is a general trend of improved performance using more positive potentials, but there are several notable cases where biofilm growth and current generation improved or only occurred at more negative potentials. This suggests that even with diverse microbial communities, it is primarily the potential of the terminal respiratory proteins used by certain exoelectrogenic bacteria, and to a lesser extent the anode potential, that determines the optimal growth conditions in the reactor. Our analysis suggests that additional bioelectrochemical investigations of both pure and mixed cultures, over a wide range of potentials, are needed to better understand how to set and evaluate optimal anode potentials for improving BES performance. © 2010 American Chemical Society.

  17. (TDS) on performance and anodic microbes of microbial fuel cells

    African Journals Online (AJOL)

    Effects of total dissolved solids (TDS) of electrolyte on performance and anodic microbes were studied in double-chamber microbial fuel cells (MFC) with batch operation. Results showed that the optimum voltage output (355 mV, 1000 ) and power generation (578 mW/m2) were achieved at TDS 20 g/L and 5 g/L, ...

  18. Accelerated creep of Ni-YSZ anodes during reduction

    DEFF Research Database (Denmark)

    Frandsen, Henrik Lund; Greco, Fabio; Ni, De Wei

    2014-01-01

    by the thermomechanical history of the stack (e.g. sintering temperature, time at temperature etc.). During operation the stress state will depend on time as stresses are relaxed by creep processes. Creep has mainly been studied at operating conditions, where the Ni-YSZ anode is in the reduced state and YSZ is the main...

  19. Liquid permeation and chemical stability of anodic alumina membranes

    Directory of Open Access Journals (Sweden)

    Dmitrii I. Petukhov

    2017-03-01

    Full Text Available A study on the chemical stability of anodic alumina membranes and their performance in long-term water and organic solvent permeation experiments is reported. Anodic alumina possesses high stability for both protonic and aprotonic organic solvents. However, serious degradation of the membrane occurs in pure water, leading to a drastic decrease of permeance (over 20% of the initial value after the passing of 0.250 m3/m2 of pure water. The drying of the membrane induces further permeance drop-off. The rate of membrane degradation strongly depends on the pH of the penetrant solution and increases in basic media. According to 27Al NMR and thermogravimetry results, the degradation of the membranes is associated with the dissolution of water-soluble [Al13O4(OH24(H2O12]7+ polyhydroxocomplexes and their further redeposition in the form of [Al(OH4]−, resulting in channels blocking. This process intensifies in basic pH due to the high positive charge of the anodic alumina surface. An approach for improving anodic aluminum oxide stability towards dissolution in water by carbon CVD coating of the membrane walls is suggested.

  20. Electrode kinetics at a platinum anode in chloroacetic acid solutions

    Energy Technology Data Exchange (ETDEWEB)

    Lotvin, B.M.; Vasil' ev, Yu.B.

    1987-02-01

    It was shown by direct comparison of kinetic and adsorption data that at platinum in solutions of mono- and trichloroacetic acid, the anodic processes are entirely analogous in character to the processes occurring in acetate solutions. The lack of Kolbe electrosynthesis products in the electrolysis of chloroacetic acids is to the special reaction features of the secondary chloroalkyl radicals.

  1. Obtaining of Trialkylphosphates in Anodic Dissolution of Copper Phosphide

    OpenAIRE

    A. P. Aueshov; М. S. Satayev; A. S. Tukibayeva

    2014-01-01

    Due to obtain trialkylphosphate is suggested to use anodic solution of copper phosphide in alcohol solutions. At this, it can use copper phosphide, obtained at the processing of wastes of phosphorus production. Moreover, it is presented ways of obtaining of tri-n-butylphosphate and tri-izo-butylphosphate.

  2. Unique Reduced Graphene Oxide as Efficient Anode Material in Li ...

    Indian Academy of Sciences (India)

    19

    Unique Reduced Graphene Oxide as Efficient Anode Material in Li Ion Battery. Sampath Kumar Puttapati1, Venkataramana Gedela1, Vadali V. S. S. Srikanth1,*. , M. V.. Reddy2,3,#. , Stefan Adams3 and B. V. R. Chowdari2. 1School of Engineering Sciences and Technology, University of Hyderabad, Gachibowli,. Hyderabad ...

  3. Sensitivity of nickel cermet anodes to reduction conditions

    Energy Technology Data Exchange (ETDEWEB)

    Mallon, Christian; Kendall, Kevin [Chemical Engineering, University of Birmingham, Edgbaston B15 2TT (United Kingdom)

    2005-08-18

    The direct use of methane as fuel for solid oxide fuel cell (SOFC) without pre-reforming would reduce running costs and enable higher efficiencies. But methane generally causes carbon deposition on the nickel anode and subsequent power degradation. This paper shows that carbon deposition from methane is very sensitive to anode reduction conditions. The effect of direct methane on microtubular SOFC reduced at two different conditions was studied at temperatures above 800{sup o}C. Reducing the cells at high temperature gave good performance on hydrogen but the current degraded quickly on methane, suggesting that carbon was blocking the nickel surfaces. This was not recoverable by bringing in hydrogen to replace the methane. Cells reduced under low temperature conditions gave higher current on methane than on hydrogen, showing that carbon deposited from the methane improved nickel anode conductivity in this case. These cells also did not degrade on methane under certain conditions but lasted for a long period. Extracting the carbon by feeding the cell with hydrogen interrupted this newly formed linkage between the nickel particles, reducing the electrical conductivity, which could be recovered by reintroducing methane. The conclusion was that nickel cermet anodes are very sensitive to reduction conditions, with low temperature reduction being preferred if methane is to be used as the chosen fuel. (author)

  4. Pentacene organic thin film transistors with anodized gate dielectric

    NARCIS (Netherlands)

    Goettling, S.; Brill, J.; Fruehauf, N.; Pflaum, J.; Margallo-Balbás, E.

    2005-01-01

    A low temperature high quality gate dielectric process for bottom gate organic thin film transistors (OTFT) is introduced which is compatible to plastic substrates. The Al2O3 dielectric is grown from the aluminum gate electrode by anodic oxidation at room temperature and exhibits an exceptionally

  5. Plasmonic properties of gold-coated nanoporous anodic alumina ...

    Indian Academy of Sciences (India)

    Home; Journals; Pramana – Journal of Physics; Volume 83; Issue 6. Plasmonic properties of gold-coated nanoporous anodic alumina with linearly organized ... NAA, when coated with a thin gold film, support plasmonic resonances. Dark-field spectroscopy revealed that gold-coated NAA with such linearly arranged pores ...

  6. Corporate Governance Country Assessment : Vietnam

    OpenAIRE

    World Bank

    2013-01-01

    This report assesses Vietnam's corporate governance policy framework. It highlights recent improvements in corporate governance regulation, makes policy recommendations, and provides investors with a benchmark against which to measure corporate governance in Vietnam. It is an update of the 2006 Corporate Governance ROSC for Vietnam. Good corporate governance enhances investor trust, protec...

  7. Dangerous Liaisons? Governments, companies and Internet governance

    Directory of Open Access Journals (Sweden)

    Francesca Musiani

    2013-02-01

    Full Text Available Private actors in the information technology sector are currently playing an increasingly important role in content mediation, as well as in regulation of online forms of expression, with implications for both internet rights and economic freedom. The “privatisation of internet governance” (DeNardis, 2010, is not a new dynamic; however, in a scenario in which users are taking advantage of increasingly sophisticated technology, the centralisation and concentration characterising today’s most widespread internet services are contributing to the accentuation of this tendency. The 'inherently political' qualities of search engine algorithm development, video content removals, blocking of domain names – actions that originate and rest with the private sector’s handling of the internet’s infrastructure – should not be neglected in our assessment of the field of internet governance today.

  8. Optimization and Domestic Sourcing of Lithium Ion Battery Anode Materials

    Energy Technology Data Exchange (ETDEWEB)

    Wood, III, D. L.; Yoon, S. [A123 Systems, Inc.

    2012-10-25

    The purpose of this Cooperative Research and Development Agreement (CRADA) between ORNL and A123Systems, Inc. was to develop a low-temperature heat treatment process for natural graphite based anode materials for high-capacity and long-cycle-life lithium ion batteries. Three major problems currently plague state-of-the-art lithium ion battery anode materials. The first is the cost of the artificial graphite, which is heat-treated well in excess of 2000°C. Because of this high-temperature heat treatment, the anode active material significantly contributes to the cost of a lithium ion battery. The second problem is the limited specific capacity of state-of-the-art anodes based on artificial graphites, which is only about 200-350 mAh/g. This value needs to be increased to achieve high energy density when used with the low cell-voltage nanoparticle LiFePO4 cathode. Thirdly, the rate capability under cycling conditions of natural graphite based materials must be improved to match that of the nanoparticle LiFePO4. Natural graphite materials contain inherent crystallinity and lithium intercalation activity. They hold particular appeal, as they offer huge potential for industrial energy savings with the energy costs essentially subsidized by geological processes. Natural graphites have been heat-treated to a substantially lower temperature (as low as 1000-1500°C) and used as anode active materials to address the problems described above. Finally, corresponding graphitization and post-treatment processes were developed that are amenable to scaling to automotive quantities.

  9. Diffusion Limitations in the Porous Anodes of SOFCs

    Energy Technology Data Exchange (ETDEWEB)

    Williford, Rick E.; Chick, Lawrence A.; Maupin, Gary D.; Simner, Steve P.; Stevenson, Jeffry W.

    2003-08-01

    Concentration polarization is important because it determines the maximum power output of a solid oxide fuel cell (SOFC) at high fuel utilization. Anodic concentration polarization occurs when the demand for reactants exceeds the capacity of the porous ceramic anode to supply them by gas diffusion mechanisms. Many models simulate this behavior by assuming an anomolous high value for the tortuosity (eg, t=17), a measure of the bulk diffusional resistance for a porous ceramic. However, recent experiments at several laboratories, including results reported herein, have provided strong evidence that typical sintered powder ceramics (30-50% porosity) have much lower tortuosities (t=2.5-3), indicating that the bulk diffusional resistance is too small to be responsible for concentration polarization. We find evidence that concentration polarization originates in the immediate vicinity of the reactive sites near the anode/electrolyte interface, at the triple phase boundaries (TPBs) between the Ni catalyst particles, the gas, and the oxygen conducting YSZ ceramic. A model is proposed to describe how concentration polarization is controlled by two localized phenomena: competitive adsorption of reactants in areas adjacent to the reactive TPB sites, followed by relatively slow surface diffusion to the reactive sites. The model parameters (adsorption activation energy and surface diffusion coefficients) were determined by fitting to well-characterized SOFC voltage-current performance data, and are in good agreement with data from the literature. Results suggest that future SOFC design improvements should focus on optimization of the reactive area, adsorption, and surface diffusion at the anode/electrolyte interface, rather than on anode thicknesses or bulk porosities.

  10. Silicon Based Anodes for Li-Ion Batteries

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Jiguang; Wang, Wei; Xiao, Jie; Xu, Wu; Graff, Gordon L.; Yang, Zhenguo; Choi, Daiwon; Li, Xiaolin; Wang, Deyu; Liu, Jun

    2012-06-15

    Silicon is environmentally benign and ubiquitous. Because of its high specific capacity, it is considered one of the most promising candidates to replace the conventional graphite negative electrode used in today's Li ion batteries. Silicon has a theoretical specific capacity of nearly 4200 mAh/g (Li21Si5), which is 10 times larger than the specific capacity of graphite (LiC6, 372 mAh/g). However, the high capacity of silicon is associated with huge volume changes (more than 300 percent) when alloyed with lithium, which can cause severe cracking and pulverization of the electrode and lead to significant capacity loss. Significant scientific research has been conducted to circumvent the deterioration of silicon based anode materials during cycling. Various strategies, such as reduction of particle size, generation of active/inactive composites, fabrication of silicon based thin films, use of alternative binders, and the synthesis of 1-D silicon nanostructures have been implemented by a number of research groups. Fundamental mechanistic research has also been performed to better understand the electrochemical lithiation and delithiation process during cycling in terms of crystal structure, phase transitions, morphological changes, and reaction kinetics. Although efforts to date have not attained a commercially viable Si anode, further development is expected to produce anodes with three to five times the capacity of graphite. In this chapter, an overview of research on silicon based anodes used for lithium-ion battery applications will be presented. The overview covers electrochemical alloying of the silicon with lithium, mechanisms responsible for capacity fade, and methodologies adapted to overcome capacity degradation observed during cycling. The recent development of silicon nanowires and nanoparticles with significantly improved electrochemical performance will also be discussed relative to the mechanistic understanding. Finally, future directions on the

  11. How nations govern growth.

    Science.gov (United States)

    1984-03-02

    Officials in China admit that the killing or abondoning of baby girls stems from a government policy limiting couples to 1 child combined with an ancient preference for sons. At the same time leaders maintain that population growth is an national emergency and must be checked. And the 1-child policy remains. To enforce the policy, sterilization is compulsory for 1 parent in a 2-child family. Other reports claim that pregnant women face severe government and social pressure to have an abortion. Comunist governments are not alone in taking a forceful role in population control. In 1975 thousands of people in India were pressured to undergo "voluntary" sterilization. In many places, police and tax collectors, money in hand, "convinced" people to get sterilized. Critics recognize a horribla abuse of government powers in these population control efforts. Recognizing that the populations of the poorest nations will double in 20-30 years, 59 countries responded with some kind of population policy by 1980. These countries are spending an average of US$4.60 on population programs for each US$1 they received in UN aid. In many places, the effort is beginning to show results. A 1982 survey found that 35 countries -- with 88% of the 3rd world population -- had cut the growth of their birthrates by 5-34%. Generally, governments have chosen any of 3 ways to attack the problem: cash payments for sterilization or contraceptive use; penalties for big families; and "delayed incentives." At least 20 governments use money to convince people to have fewer babies. Some programs pay for sterilization,other for contraceptive use. All payments are low. Some governments personalize those who exceed a recommended family size. Other nations have adopted variations of the idea. Some governments, instead of paying up front cash, offer pension plans or bank accounts to limit family size. Almost all population experts believe that the mot successful programs are those which are not imposed from

  12. Romanian government bond market

    Directory of Open Access Journals (Sweden)

    Cornelia POP

    2012-12-01

    Full Text Available The present paper aims to present the level of development reached by Romanian government bond market segment, as part of the country financial market. The analysis will be descriptive (the data series available for Romania are short, based on the secondary data offered by the official bodies involved in the process of issuing and trading the Romanian government bonds (Romanian Ministry of Public Finance, Romanian National Bank and Bucharest Stock Exchange, and also on secondary data provided by the Federation of European Stock Exchanges.To enhance the market credibility as a benchmark, a various combination of measures is necessary; among these measures are mentioned: the extension of the yield curve; the issuance calendars in order to improve transparency; increasing the disclosure of information on public debt issuance and statistics; holding regular meetings with dealers, institutional investors and rating agencies; introducing a system of primary dealers; establishing a repurchase (repo market in the government bond market. These measures will be discussed based on the evolution presented inside the paper.The paper conclude with the fact that, until now, the Romanian government bond market did not provide a benchmark for the domestic financial market and that further efforts are needed in order to increase the government bond market transparency and liquidity.

  13. Climate change governance

    Energy Technology Data Exchange (ETDEWEB)

    Knieling, Joerg [HafenCity Univ. Hamburg (Germany). Urban Planning and Regional Development; Leal Filho, Walter (eds.) [HAW Hamburg (Germany). Research and Transfer Centre Applications of Life Science

    2013-07-01

    Climate change is a cause for concern both globally and locally. In order for it to be tackled holistically, its governance is an important topic needing scientific and practical consideration. Climate change governance is an emerging area, and one which is closely related to state and public administrative systems and the behaviour of private actors, including the business sector, as well as the civil society and non-governmental organisations. Questions of climate change governance deal both with mitigation and adaptation whilst at the same time trying to devise effective ways of managing the consequences of these measures across the different sectors. Many books have been produced on general matters related to climate change, such as climate modelling, temperature variations, sea level rise, but, to date, very few publications have addressed the political, economic and social elements of climate change and their links with governance. This book will address this gap. Furthermore, a particular feature of this book is that it not only presents different perspectives on climate change governance, but it also introduces theoretical approaches and brings these together with practical examples which show how main principles may be implemented in practice.

  14. Approaching Moisture Recycling Governance

    Science.gov (United States)

    Keys, Patrick; Wang-Erlandsson, Lan; Gordon, Line; Galaz, Victor; Ebbesson, Jonas

    2017-04-01

    The spatial and temporal dynamics of water resources are a continuous challenge for effective and sustainable national and international governance. Despite the surface watershed being the typical unit of water management, recent advances in hydrology have revealed 'atmospheric watersheds' - otherwise known as precipitationsheds. Also, recent research has demonstrated that water flowing within a precipitationshed may be modified by land-use change in one location, while the effect of this modification could be felt in a different province, nation, or continent. Notwithstanding these insights, the major legal and institutional implications of modifying moisture recycling have remained unexplored. In this presentation, we examine potential approaches to moisture recycling governance. We first identify a set of international study regions, and then develop a typology of moisture recycling relationships within these regions ranging from bilateral moisture exchange to more complex networks. This enables us to classify different types of legal and institutional governance principles. Likewise, we relate the moisture recycling types to existing land and water governance frameworks and management practices. The complexity of moisture recycling means institutional fit will be difficult to generalize for all moisture recycling relationships, but our typology allows the identification of characteristics that make effective governance of these normally ignored water flows more tenable.

  15. Anodic luminescence, structural, photoluminescent, and photocatalytic properties of anodic oxide films grown on niobium in phosphoric acid

    Energy Technology Data Exchange (ETDEWEB)

    Stojadinović, Stevan, E-mail: sstevan@ff.bg.ac.rs [University of Belgrade, Faculty of Physics, Studentski trg 12-16, 11000 Belgrade (Serbia); Tadić, Nenad [University of Belgrade, Faculty of Physics, Studentski trg 12-16, 11000 Belgrade (Serbia); Radić, Nenad [University of Belgrade, Institute of Chemistry, Technology and Metallurgy, Department of Catalysis and Chemical Engineering, Njegoševa 12, 11000 Belgrade (Serbia); Stefanov, Plamen [Institute of General and Inorganic Chemistry, Bulgarian Academy of Sciences, Acad. G. Bonchev Str., Block 11, 1113 Sofia (Bulgaria); Grbić, Boško [University of Belgrade, Institute of Chemistry, Technology and Metallurgy, Department of Catalysis and Chemical Engineering, Njegoševa 12, 11000 Belgrade (Serbia); Vasilić, Rastko [University of Belgrade, Faculty of Physics, Studentski trg 12-16, 11000 Belgrade (Serbia)

    2015-11-15

    Graphical abstract: - Highlights: • Anodic luminescence is correlated to the existence of morphological defects in the oxide. • Spectrum under spark discharging reveals only oxygen and hydrogen lines. • Oxide films formed under spark discharging are crystallized and composed of Nb{sub 2}O{sub 5}. • Photocatalytic activity and photoluminescence of Nb{sub 2}O{sub 5} films increase with time. - Abstract: This article reports on properties of oxide films obtained by anodization of niobium in phosphoric acid before and after the dielectric breakdown. Weak anodic luminescence of barrier oxide films formed during the anodization of niobium is correlated to the existence of morphological defects in the oxide layer. Small sized sparks generated by dielectric breakdown of formed oxide film cause rapid increase of luminescence intensity. The luminescence spectrum of obtained films on niobium under spark discharging is composed of continuum radiation and spectral lines caused by electronic spark discharging transitions in oxygen and hydrogen atoms. Oxide films formed before the breakdown are amorphous, while after the breakdown oxide films are partly crystalline and mainly composed of Nb{sub 2}O{sub 5} hexagonal phase. The photocatalytic activity of obtained oxide films after the breakdown was investigated by monitoring the degradation of methyl orange. Increase of the photocatalytic activity with time is related to an increase of oxygen vacancy defects in oxide films formed during the process. Also, higher concentration of oxygen vacancy defects in oxide films results in higher photoluminescence intensity.

  16. Removal of organic contaminants from secondary effluent by anodic oxidation with a boron-doped diamond anode as tertiary treatment.

    Science.gov (United States)

    Garcia-Segura, Sergi; Keller, Jürg; Brillas, Enric; Radjenovic, Jelena

    2015-01-01

    Electrochemical advanced oxidation processes (EAOPs) have been widely investigated as promising technologies to remove trace organic contaminants from water, but have rarely been used for the treatment of real waste streams. Anodic oxidation with a boron-doped diamond (BDD) anode was applied for the treatment of secondary effluent from a municipal sewage treatment plant containing 29 target pharmaceuticals and pesticides. The effectiveness of the treatment was assessed from the contaminants decay, dissolved organic carbon and chemical oxygen demand removal. The effect of applied current and pH was evaluated. Almost complete mineralization of effluent organic matter and trace contaminants can be obtained by this EAOP primarily due to the action of hydroxyl radicals formed at the BDD surface. The oxidation of Cl(-) ions present in the wastewater at the BDD anode gave rise to active chlorine species (Cl2/HClO/ClO(-)), which are competitive oxidizing agents yielding chloramines and organohalogen byproducts, quantified as adsorbable organic halogen. However, further anodic oxidation of HClO/ClO(-) species led to the production of ClO3(-) and ClO4(-) ions. The formation of these species hampers the application as a single-stage tertiary treatment, but posterior cathodic reduction of chlorate and perchlorate species may reduce the risks associated to their presence in the environment. Copyright © 2014 Elsevier B.V. All rights reserved.

  17. Trialogue model for ecosystem governance.

    CSIR Research Space (South Africa)

    Hattingh, J

    2007-01-01

    Full Text Available The International Symposium on Ecosystem Governance held in South Africa during 2005 enabled scientists from several disciplines to debate issues relating to governance. The symposium provided an opportunity to explore the concept of governance...

  18. Managing e-government

    DEFF Research Database (Denmark)

    Rose, Jeremy; Persson, John Stouby; Heeager, Lise Tordrup

    2015-01-01

    Public sector managers take much of the responsibility for selecting, commissioning, implementing and realising benefits from information technology (IT) projects. However, e-Government initiatives often suffer from complexity, vision failure, lack of goal clarity and insufficient commitment....... These problems may stem from value traditions that are deeply ingrained in managers' cultural environments but not always in harmony with each other. A first step towards working with value complexity is to understand it; we synthesise a model of value positions for e-Government derived from major traditions...... in the public administration literature. Four value positions relevant to e-Government together with their IT assumptions are identified; they reflect the ideals of professionalism, efficiency, service and engagement. A qualitative investigation of Danish local authority managers displays both value congruence...

  19. Pension Fund Governing Board

    CERN Multimedia

    HR Department

    2008-01-01

    Note The CERN pension scheme is based on the principle of defined benefits, so beneficiaries continue to receive the benefits to which they are entitled in accordance with the Rules of the Pension Fund. This means that pension entitlements under the Rules are not directly affected by the financial crisis and the current economic situation. However, the adjustment of pensions to the cost of living is not automatic and, under the method applied since 2006, must take into account the Fund’s financial position. Meeting of the Pension Fund Governing Board The Pension Fund Governing Board held its eighth meeting at ESO in Garching, Germany (near Munich) on 24 October 2008. Before starting its work, the Governing Board had the privilege of hearing an opening address by Professor Tim de Zeeuw, the Director General of ESO. Professor de Zeeuw described the mission of ESO and the ambitious projects of his organisation, which performs astronomy observations using telescopes located in...

  20. Why Governments Intervene

    DEFF Research Database (Denmark)

    Brown, Dana; Knudsen, Jette Steen

    Why are national governments increasingly adopting policies on Corporate Social Responsibility (CSR)? What is the rationale and purpose of these policies? Scholars from various disciplines including Political Science, International Relations and Management Studies have offered explanations...... for this phenomenon. Research has tended either to rely on cross-country comparisons that generalize tendencies within given countries; or to over-generalize global trends. The current paper analyzes particular CSR policies in two countries – Denmark and the United Kingdom. We find that the rationales for government...... initiatives on CSR are neither consistent across countries or within them. Instead, CSR policies are utilized to address multiple issues crossing various areas of governance, including domestic social policy, global competitiveness policies and foreign policy....

  1. Corporate governance and liquidity

    DEFF Research Database (Denmark)

    Farooq, Omar; Derrabi, Mohamed; Naciri, Monir

    2012-01-01

    difference in liquidity between the two periods. Furthermore, our results indicate that more than 50% of this difference between the two periods can be explained by operational and informational complexity of a firm – proxy for transparency. We argue that poor corporate governance mechanisms increase......This paper examines the impact of corporate governance mechanisms on liquidity in the MENA region, i.e. Morocco, Egypt, Saudi Arabia, United Arab Emirates, Jordan, Kuwait, and Bahrain. Using turnover as a proxy for liquidity, we document significant difference in liquidity between the pre......- and the post-crisis periods in the MENA region. In addition, our results show that bulk of this reduction in turnover can be explained due to weaknesses of corporate governance mechanisms. For example, that dividend payout ratio and choice of auditors – proxies for agency problems – can explain the entire...

  2. Governance of the future

    DEFF Research Database (Denmark)

    Galløe, Lotte Rannveig

    a different future for both parents and children. Thus, the approach to PMTO as a technology of the future indicates its expected prevalence in the future and its attempt to reach in to the future becoming of the child. The technology’s involvement of the relatives and its orientation towards shaping...... governance seek to chance the possible future conditions and targets the marginalized child’s relatives? Parent Management Training (PMTO) is studied as a technology of the future that expands and transforms governance. PMTO targets parents with aggressive and asocial children and aims to “create the parent...... as the child’s best teacher”. The program involves parents as facilitators modifying the child’s behavior instead of working directly on the child, thereby widening the target of intervention. PMTO exemplifies an arrangement that engages the private sphere in the conduct of public governance aiming at creating...

  3. Corrosion of cermet anodes during low temperature electrolysis of alumina. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kozarek, R.L.; Ray, S.P.; Dawless, R.K.; LaCamera, A.F.

    1997-09-26

    Successful development of inert anodes to replace carbon anodes in Hall cells has the potential benefits of lower energy consumption,lower operating costs, and reduced CO{sub 2} and CO emissions. Using inert anodes at reduced current density and reduced operating temperature (800 C) has potential for decreasing the corrosion rate of inert anodes. It may also permit the use of new materials for containment and insulation. This report describes the fabrication characteristics and the corrosion performance of 5324-17% Cu Cermet anodes in 100 hour tests. Although some good results were achieved, the corrosion rate at low temperature (800 C) is varied and not significantly lower than typical results at high temperature ({approximately} 960 C). This report also describes several attempts at 200 hour tests, with one anode achieving 177 hours of continuous operation and another achieving a total of 235 hours but requiring three separate tests of the same anode. The longest run did show a lower wear rate in the last test; but a high resistance layer developed on the anode surface and forced an unacceptably low current density. It is recommended that intermediate temperatures be explored as a more optimal environment for inert anodes. Other electrolyte chemistries and anode compositions (especially high conductivity anodes) should be considered to alleviate problems associated with lower temperature operation.

  4. Instruments of Transformative Governance

    DEFF Research Database (Denmark)

    Borrás, Susana

    production and distribution channels. PDPs aim at overcoming current market and government failures by pooling resources in the attempt to solve this global social challenge. Thus, PDPs are a case of instruments of transformative research and innovation, operating in a transnational governance context....... They exhibit three novelties: they address strategic long-term problems in a holistic manner, set substantive output-oriented goals, and are implemented through new organizational structures. After characterizing the different types of current PDPs and the context in which they emerged, the paper examines...

  5. Governance Vote Results

    Science.gov (United States)

    Bamzai, Anjuli; Robinson, Robert; Shirey, Steven

    2009-11-01

    Voting by the membership for proposed changes to AGU bylaws and articles of incorporation was completed on 13 November 2009. The proposed changes would expand AGU's Council to focus it on science; shift the business and fiduciary responsibility for AGU to a newly created, smaller Board of Directors, freeing the Council to focus on science policy and other science-related matters; and modernize AGU's governing documents to reflect current practice in not-for-profit governance. All background information was provided in the 15 September 2009 issue of Eos and in subsequent issues.

  6. Making Migrants Governable

    DEFF Research Database (Denmark)

    Stenum, Helle

    2012-01-01

    This paper will investigate the production of knowledge regarding the number of illegalized migrants. Estimation of the number has been the common frame for production of this kind of knowledge, performed by social scientists, government officials, NGOs and others, but now biometric technology...... by biometric technology will produce increased objectivity and depolitization in numbers of irregular migrants which could not be obtained in the field of estimation. The level of truth reflects the level of control and surveillance fixed as a strategy of government of mobility in the biometric technology....

  7. Governing EU employment policy

    DEFF Research Database (Denmark)

    Sørensen, Eva; Triantafillou, Peter; Damgaard, Bodil

    2015-01-01

    In the European Union (EU), employment policy is a prerogative of the member states. Therefore the EU's ability to govern in this area depends on its capability to involve national governments and relevant stakeholders in a collaborative effort to formulate and implement shared policy objectives....... Drawing an analytical distinction between cooperation, coordination and collaboration, the article analyses the formulation and implementation of EU employment policies. It concludes that while the formulation of policy objectives and the discussion of national policy approaches do involve elements...

  8. Governing To‐day

    DEFF Research Database (Denmark)

    Turner, Kevin

    Governing To-day denotes a domain of research, and what the thesis undertakes is a theoretical discussion of some questions of method vis-à-vis researching this domain. There are two aspects to the title that enfold one another. Firstly, “governing to-day” signposts that it is to!day that is to b...... of departure in the research and writing of the French philosopher and historian, Michel Foucault. It is primarily within the writings of Foucault that the thesis seeks to find a workaround to the problem thrown forth by the aforementioned questions of method....

  9. Governing IT outsourcing relationships

    CERN Document Server

    Kuhlmann, Daniel

    2012-01-01

    Hauptbeschreibung The dynamics of the relationship between service recipient and service provider in IS outsourcing relationships recently gained increased attention as relationships are believed to have a considerable influence on IS outsourcing success. This study adds to this growing field of interest by developing an IS outsourcing relationship framework in the form of a process model. Three rather disjointed areas of research, namely contractual governance, relational norms, and control, have been set in a common context by interrelating them as the three main governance modes

  10. Competence, governance, and entrepreneurship

    DEFF Research Database (Denmark)

    Foss, Nicolai Juul; Mahnke, Volker

    This title illustrates modern economics. Because it informs strategic choices, it is relevant to business administration in general, and for strategic management in particular. Two dominant streams may be identified in the literature, namely the "competence" and "governance" perspectives on the f......This title illustrates modern economics. Because it informs strategic choices, it is relevant to business administration in general, and for strategic management in particular. Two dominant streams may be identified in the literature, namely the "competence" and "governance" perspectives......, and entrepreneurship to advance and stimulate economic strategy research....

  11. Development of nano cerium oxide incorporated aluminium alloy sacrificial anode for marine applications

    Energy Technology Data Exchange (ETDEWEB)

    Shibli, S.M.A. [Department of Chemistry, University of Kerala, Thiruvananthapuram, Kerala 695 581 (India)], E-mail: smashibli@yahoo.com; Archana, S.R. [Department of Chemistry, University of Kerala, Thiruvananthapuram, Kerala 695 581 (India); Muhamed Ashraf, P. [Central Institute of Fisheries Technology, Cochin, Kerala 682 029 (India)

    2008-08-15

    Aluminium-zinc alloy sacrificial anodes are extensively used for cathodic protection. The performance of the sacrificial anodes can be significantly improved by incorporation of microalloying elements in the aluminium matrix. In the present work nano cerium oxide particles of different concentrations, ranging from 0 to 1 wt% were incorporated for activating and improving the performance of the anode. The electrochemical test results revealed the increased efficiency of the anode. The electrochemical impedance spectroscopy revealed the information that the presence of nano cerium oxide in the anode matrix caused effective destruction of the passive alumina film, which facilitated enhancement of galvanic performance of the anode. Moreover, the biocidal activity of cerium oxide prevented the bio accumulation considerably which enables the anodes to be used in aggressive marine conditions.

  12. Local government`s pollution prevention program

    Energy Technology Data Exchange (ETDEWEB)

    Swanson, D. [Boulder Country Pollution Prevention Program, Boulder, CO (United States)

    1996-12-31

    The pollution prevention program operated by the Health Department of Boulder County is called Business Partners for a Clean Environment (Business Partners). It is a cooperative effort among local businesses, the City of Boulder, Boulder County, and the Boulder Chamber of Commerce. This nonregulatory, incentive-based program provides industry with pollution prevention information and technical assistance necessary to reduce and/or eliminate environmental waste. This paper provides an overview of the program development, creation of partnerships and trust, and some of the results from implementation of the program. Following the first 18 months of the program, 35 businesses were recognized as Business Partners. The Business Partners program has also received an achievement award from the National Association of Counties for promoting {open_quotes}responsible, responsive, and effective government{close_quotes} and two governor`s awards from the State of Colorado. Participating businesses have demonstrated that a pollution prevention program can reduce environmental waste, increase employee safety, and decrease costs. 4 refs., 4 figs., 5 tabs.

  13. The Russia Corporate Governance Manual : Part I. Corporate Governance Introduced

    OpenAIRE

    International Finance Corporation; U.S. Department of Commerce

    2004-01-01

    The Russia corporate governance manual has been divided into and is published in six parts: (i) corporate governance introduced; (ii) good board practices; (iii) shareholder rights; (iv) information disclosure and transparency; (v) special focus section; and (vi) annexes model corporate governance documents. The first four parts contain chapters that focus on core corporate governance issu...

  14. E-Government for Good Governance in Developing Countries ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    E-Government for Good Governance in Developing Countries: Empirical Evidence from the eFez Project. Book cover E-Government for Good Governance in Developing Countries. Auteur(s) : Driss Kettani and Bernard Moulin. Maison(s) d'édition : Anthem Press, IDRC. 1 mai 2014. ISBN : 9781783082636. 298 pages.

  15. Competence, governance, and entrepreneurship

    DEFF Research Database (Denmark)

    Foss, Nicolai Juul; Mahnke, Volker

    This title illustrates modern economics. Because it informs strategic choices, it is relevant to business administration in general, and for strategic management in particular. Two dominant streams may be identified in the literature, namely the "competence" and "governance" perspectives on the f......, and entrepreneurship to advance and stimulate economic strategy research....

  16. Contractual Corporate Governance

    NARCIS (Netherlands)

    Goergen, M.; Renneboog, L.D.R.

    2008-01-01

    Companies have the choice to deviate from their national corporate governance standards by opting into another system. They can do so via contractual devices – such as cross-border mergers and acquisitions, (re)incorporations, and cross-listings – which enable firms to choose their preferred level

  17. Getting Port Governance Right

    DEFF Research Database (Denmark)

    de Langen, Peter; Saragiotis, Periklis

    2018-01-01

    This chapter discusses the relevance of ports for economic development and next identifies port governance as a critical determinant of a well-functioning port industry. While in the past decades privately owned terminal operating companies have emerged and contributed to more efficient supply ch...

  18. Government by standards

    DEFF Research Database (Denmark)

    Triantafillou, Peter

    2016-01-01

    be contributing to accountability overload. This article seeks to provide an explanation for why hospital staff seems to accept, albeit grudgingly and partially, the imposition of a new, comprehensive accountability system with questionable clinical merits. Inspired by Michel Foucault’s analytics of government...

  19. Values and Governance Systems

    NARCIS (Netherlands)

    Ruys, P.H.M.; van den Brink, J.R.; Semenov, R.

    1999-01-01

    Cooperative behavior as well as other cultural rules and values are made explicit in organizational units that procure and provide a common service. The common service is procured by a club, which consists of a user-value function, a representation governance, and a budget-allocation function. The

  20. Corporate governance through codes

    NARCIS (Netherlands)

    Haxhi, I.; Aguilera, R.V.; Vodosek, M.; den Hartog, D.; McNett, J.M.

    2014-01-01

    The UK's 1992 Cadbury Report defines corporate governance (CG) as the system by which businesses are directed and controlled. CG codes are a set of best practices designed to address deficiencies in the formal contracts and institutions by suggesting prescriptions on the preferred role and

  1. Governability and Citizen Participation

    Directory of Open Access Journals (Sweden)

    Giancarla de Quiroga

    1999-10-01

    Full Text Available bjective conditions that allow for a harmonic relationship between the governors and the governed. We are speaking about a set of conditions for governing by consensus and in harmony. By “citizen participation” we refer to the fact that citizens share in the powerof decision over something that concerns them. In Bolivia, as well in other Latin American countries, citizenship participation in municipal management is a recent phenomena. This article describes the experience of citizenry participation in the municipality ofCochabamba (Bolivia in relation to quality of life and living conditions in a neighborhood. The municipality of Cochabamba has embarked upon a mission of rescue and evaluation of the neighborhood organizations, not only incorporating the population into the processes of participation, but also acting in favor of social integration because this stresses the commitment of the neighborhood citizens in the design of the plans. In conclusion, the unfolding experience in the municipality of Cochabamba makes the fact clear that beyond the concept of governability, the search for a co-government-type relation prevails, one that is more horizontal and equitable and where the population takes on a leading role for bringing about the social cohesion and the sense of belonging needed to face the serious problems that afflict Latin American cities.

  2. Governing Logistics Information Platforms

    NARCIS (Netherlands)

    Klievink, A.J.; Aldewereld, H.M.; Knol, A.; Tan, Y.H.

    2014-01-01

    The Extended Single Window (ESW) project aims to support goods flows by Information and Communication Technology (ICT). Specifically, the project takes the concept of Single Windows (often used in the sense that governments offer a single portal or interface to which businesses can submit

  3. Governing the water user

    NARCIS (Netherlands)

    Rap, Edwin; Wester, Flip

    2017-01-01

    This article traces a policy shift that makes the ‘water user’ the main subject of water governance. From a Foucauldian perspective on governmentality these new subjectivities accompany neo-liberal governmental technologies to devolve autonomy from state institutions to an active user base, whilst

  4. Government support of innovation

    CERN Multimedia

    Studt, T

    2003-01-01

    "One of the Federal government's few formal interagency enterprises, the Networking and Information Technology R&D (NITRD) program, is the collaborative framework of numerous federal agencies that conduct fundamental R&D in advanced networks, computing systems, software, and information management technologies" (1/2 page).

  5. Local government in Ethiopia

    African Journals Online (AJOL)

    LAW

    farmers would find themselves being rounded up at gun point by the local defence squad, and forcibly dispatched...”69. The involvement of UDAs and PAs in the forceful conscription of young people into the government's army was another control oriented action. Derg was forcefully conscripting young Ethiopians for the ...

  6. 'developmental' local government to

    African Journals Online (AJOL)

    1. DEVELOPMENTAL CHALLENGES. FACING SOUTH AFRICAN. URBAN REGIONS AND. GOVERNMENTS. As an introduction to this article it would be appropriate to begin the discussion with some developmental acumen from the office of the Presidency. The new Green Paper: National Strategic. Planning, published by ...

  7. Corporate Media Governance

    NARCIS (Netherlands)

    Kempen, Petrus Cornelis

    2011-01-01

    The media can make or break a reputation. This being said, it seems to be essential for companies, governments and institutions to pay specific attention to corporate media management in their daily operations. However, this thesis shows that they often neglect to pay adequate attention to corporate

  8. Explaining governance outcomes

    DEFF Research Database (Denmark)

    Fawcett, Paul; Daugbjerg, Carsten

    2012-01-01

    between vertical coordination on the state–society axis and horizontal coordination on the interest integration axis. This produces a typology of governance arrangements, which are evaluated according to the level of input and output legitimacy that they are likely to generate, two criteria that are taken...

  9. The Governance of Services

    NARCIS (Netherlands)

    Ruys, P.H.M.

    2005-01-01

    The problem of assessing a system of governance for composite services in the social economy is approached by means of original methods.The main innovation is that the welfare structure of a society is separated from the legal transaction- or institutional structure.As both the various types of

  10. Governability in Contemporary Mexico

    Directory of Open Access Journals (Sweden)

    Leonardo Curzio Gutiérrez

    1998-04-01

    Full Text Available Given the difficulties to establish a concept of governability and the frequent ideological usage of the term, it is much more operative to turn to the principle of governability, in the broad sense, which supports itself on five pillars: the political legitimacy of the government, the governmental efficiency to attend to the demands of society, the existence of shared social project, the agreement with the principle special interest groups, and international viability. The analysis of the structure and relevance of these five points during the long period of political transition that Mexico underwent between 1988 and 1997 shows how it was possible for this country to play off certain factors against each other in order to secure governability and safeguard against the consequences of any resultant imbalances. Between 1998-1993, the government of Salinas de Gotari based itself on the viability of a neoliberal project within an international context, and on this projectís attention to domestic demands as well as on the governmentís pact with elites. Institutional integration and legitimacy made up, then, for a process of discreet liberalization and the lack of democratic electoral commitment, which culminated in the PRI’s 1994 elections victory.The assassination of Colosia, though, and the appearance of the EZLN and the subsequent crisis surrounding the peso’s devaluation that accompanied Ernesto Zedilloís rise to power soon led to the collapse of those pillars of support. Crowning the process of the silenttransition were the elections of 1997, which makes it possible to say that in Mexico today there are now smooth elections, but that reform of the State is still unresolved —a subject that includes the reduction of the president’s competence. Seen in the short term, the most direct threats to Mexico’s governability will come as a result of the lack of attention to those demands of society’s underprivileged and the ill

  11. Electrochemical Impedance Modeling of a Solid Oxide Fuel Cell Anode

    DEFF Research Database (Denmark)

    Mohammadi, R.; Søgaard, Martin; Ramos, Tania

    2014-01-01

    (TLM), which is suitably modified to account for the electrode microstructural details, is used for modeling the impedance arising from the electrochemical reactions. In order to solve the system of nonlinear equations, an in-house code based on the finite difference method was developed. Some......A simulation package for the impedance response of SOFC anodes is presented here. The model couples the gas transport in gas channels and within a porous electrode with the electrochemical kinetics. The gas phase mass transport is modeled using mass conservation equations. A transmission line model...... of the model constants have been calibrated against experimental data. It is demonstrated that the simulation tool is capable of predicting the impedance response of an experimental data set obtained on symmetrical cells with Ni/ScYSZ SOFC anodes. A parametric study is also carried out using the developed...

  12. Electrocatalytic Properties of BDD Anodes: Its Loosely Adsorbed Hydroxyl Radicals

    Directory of Open Access Journals (Sweden)

    Nicolaos Vatistas

    2012-01-01

    Full Text Available The high oxidative action of boron doped diamond (BDD anodes on the biorefractory organic compounds has been attributed to the low adsorption of the generated hydroxyl radicals on the BDD surface in respect to other anodic materials. In a previous paper, the effect of low adsorption of BBD has been studied by proposing a continuum approach to represent the adsorption layer. The oxidative action of the hydroxyl radicals is attributed to the values of their diffusivity into the adsorption and adjacent reactive layer as well as to the value of kinetic constant in both layers. In this paper, more details on both layers are reported in order to justify the proposed continuum approach as well as the assumptions concerning diffusivity and kinetic constant in both adsorption and reactive layers, where the oxidative action of hydroxyl radicals occurs.

  13. Enhanced Biocompatibility in Anodic TaO x Nanotube Arrays

    Science.gov (United States)

    Zeng, Yu-Jin; Twan, Sheng-Chen; Wang, Kuan-Wen; Huang, Her-Hsiung; Hsu, Yen-Bin; Wang, Chien-Ying; Lan, Ming-Ying; Lee, Sheng-Wei

    2017-10-01

    This study first investigates the biocompatibility of self-organized TaO x nanotube arrays with different nanotube diameters fabricated by electrochemical anodization. All as-anodized TaO x nanotubes were identified to be an amorphous phase. The transition in surface wettability with TaO x nanotube diameters can be explained based on Wenzel's model in terms of geometric roughness. In vitro biocompatibility evaluation further indicates that fibroblast cells exhibit an obvious wettability-dependent behavior on the TaO x nanotubes. The 35-nm-diameter TaO x nanotube arrays reveal the highest biocompatibility among all samples. This enhancement could be attributed to highly dense focal points provided by TaO x nanotubes due to higher surface hydrophilicity. This work demonstrates that the biocompatibility in Ta can be improved by forming TaO x nanotube arrays on the surface with appropriate nanotube diameter and geometric roughness.

  14. Carbon Cryogel Silicon Composite Anode Materials for Lithium Ion Batteries

    Science.gov (United States)

    Woodworth James; Baldwin, Richard; Bennett, William

    2010-01-01

    A variety of materials are under investigation for use as anode materials in lithium-ion batteries, of which, the most promising are those containing silicon. 10 One such material is a composite formed via the dispersion of silicon in a resorcinol-formaldehyde (RF) gel followed by pyrolysis. Two silicon-carbon composite materials, carbon microspheres and nanofoams produced from nano-phase silicon impregnated RF gel precursors have been synthesized and investigated. Carbon microspheres are produced by forming the silicon-containing RF gel into microspheres whereas carbon nano-foams are produced by impregnating carbon fiber paper with the silicon containing RF gel to create a free standing electrode. 1-4,9 Both materials have demonstrated their ability to function as anodes and utilize the silicon present in the material. Stable reversible capacities above 400 mAh/g for the bulk material and above 1000 mAh/g of Si have been observed.

  15. Electrocatalyst for alcohol oxidation at fuel cell anodes

    Science.gov (United States)

    Adzic, Radoslav [East Setauket, NY; Kowal, Andrzej [Cracow, PL

    2011-11-02

    In some embodiments a ternary electrocatalyst is provided. The electrocatalyst can be used in an anode for oxidizing alcohol in a fuel cell. In some embodiments, the ternary electrocatalyst may include a noble metal particle having a surface decorated with clusters of SnO.sub.2 and Rh. The noble metal particles may include platinum, palladium, ruthenium, iridium, gold, and combinations thereof. In some embodiments, the ternary electrocatalyst includes SnO.sub.2 particles having a surface decorated with clusters of a noble metal and Rh. Some ternary electrocatalysts include noble metal particles with clusters of SnO.sub.2 and Rh at their surfaces. In some embodiments the electrocatalyst particle cores are nanoparticles. Some embodiments of the invention provide a fuel cell including an anode incorporating the ternary electrocatalyst. In some aspects a method of using ternary electrocatalysts of Pt, Rh, and SnO.sub.2 to oxidize an alcohol in a fuel cell is described.

  16. SOFC anode reduction studied by in situ TEM

    DEFF Research Database (Denmark)

    Simonsen, Søren Bredmose; Wagner, Jakob Birkedal; Hansen, Thomas Willum

    for studying these nanoscale structures, but only few SOFC studies have applied in situ TEM to observe the ceramic nanostructures in a reactive gas environment at elevated temperatures. The present contribution focuses on the reduction of an SOFC anode which is a necessary process to form the catalytically......The Solid Oxide Fuel Cell (SOFC) is a promising part of future energy approaches due to a relatively high energy conversion efficiency and low environmental pollution. SOFCs are typically composed of ceramic materials which are highly complex at the nanoscale. TEM is routinely applied ex situ...... active Ni surface before operating the fuel cells. The reduction process was followed in the TEM while exposing a NiO/YSZ (YSZ = Y2O3-stabilized ZrO2) model anode to H2 at T = 250-1000⁰C. Pure NiO was used in reference experiments. Previous studies have shown that the reduction of pure Ni...

  17. Manufacturing of anode supported SOFCs: Processing parameters and their influence

    DEFF Research Database (Denmark)

    Ramousse, Severine; Menon, Mohan; Brodersen, Karen

    2007-01-01

    contains a complex microstructure. In order to improve the cell performance as well as reducing the processing costs, it has been found necessary to consider the process chain holistically, because successful manufacture of such a cell and the achievement of optimal final properties depend on each......The establishment of low cost, highly reliable and reproducible manufacturing processes has been focused for commercialization of SOFC technology. A major challenge in the production chain is the manufacture of anode-supported planar SOFC's single cells in which each layer in a layered structure...... of the processing steps and their interdependence. A large database for several thousand anode-supported SOFCs manufactured annually at the Risoe National Laboratory in collaboration with Topsoe Fuel Cell A/S has been constructed. This enables a statistical analysis of the various controlling parameters. Some...

  18. Reviving the lithium metal anode for high-energy batteries

    Science.gov (United States)

    Lin, Dingchang; Liu, Yayuan; Cui, Yi

    2017-03-01

    Lithium-ion batteries have had a profound impact on our daily life, but inherent limitations make it difficult for Li-ion chemistries to meet the growing demands for portable electronics, electric vehicles and grid-scale energy storage. Therefore, chemistries beyond Li-ion are currently being investigated and need to be made viable for commercial applications. The use of metallic Li is one of the most favoured choices for next-generation Li batteries, especially Li-S and Li-air systems. After falling into oblivion for several decades because of safety concerns, metallic Li is now ready for a revival, thanks to the development of investigative tools and nanotechnology-based solutions. In this Review, we first summarize the current understanding on Li anodes, then highlight the recent key progress in materials design and advanced characterization techniques, and finally discuss the opportunities and possible directions for future development of Li anodes in applications.

  19. Recycling rice husks for high-capacity lithium battery anodes.

    Science.gov (United States)

    Jung, Dae Soo; Ryou, Myung-Hyun; Sung, Yong Joo; Park, Seung Bin; Choi, Jang Wook

    2013-07-23

    The rice husk is the outer covering of a rice kernel and protects the inner ingredients from external attack by insects and bacteria. To perform this function while ventilating air and moisture, rice plants have developed unique nanoporous silica layers in their husks through years of natural evolution. Despite the massive amount of annual production near 10(8) tons worldwide, so far rice husks have been recycled only for low-value agricultural items. In an effort to recycle rice husks for high-value applications, we convert the silica to silicon and use it for high-capacity lithium battery anodes. Taking advantage of the interconnected nanoporous structure naturally existing in rice husks, the converted silicon exhibits excellent electrochemical performance as a lithium battery anode, suggesting that rice husks can be a massive resource for use in high-capacity lithium battery negative electrodes.

  20. Evaluating e-Government and Good Governance Correlation

    Directory of Open Access Journals (Sweden)

    Suhardi Suhardi

    2016-03-01

    Full Text Available Assessing the achievement of Indonesian government institutions in implementing e-government has been conducted since around a decade ago. Several national assessments are available with almost the same ranking results. There is an agreement that the ultimate goal of e-government implementation is to achieve good government governance (GGG, while success stories of e-government require good governance practices. This study explored the correlation between e-government achievement and GGG achievement in Indonesia. Spearman’s rank correlation was used to characterize the relationship strength between e-government assessment results and good governance assessment results. The data were collected from institutions that participated in e-government and good governance assessments. The results showed that the correlation between these two entities is not very strong. Most cases showed that e-government implementation and the achievement of good governance have only a moderate positive correlation and none of the studied cases indicated a significant connection. This result can be attributed to the lack of emphasis on goals achievement in the assessments. Thus, it is recommended that future Indonesian e-government assessments should involve impact indicators.

  1. Digital governance and institutional change

    DEFF Research Database (Denmark)

    Schlæger, Jesper

    2010-01-01

    Coal allocation in China is a seminal case of e-government in the political economy. The empirical phenomenon of market supporting e-government has not been systematically analysed. By developing and applying a digital governance model this article examines institutional change in a case of coal...... to the role of e-government in the political economy....

  2. Corporate Governance Country Assessment : Togo

    OpenAIRE

    World Bank

    2009-01-01

    The purpose of this ROSC assessment of corporate governance in Togo is to help improve corporate governance in the country by assessing law and practice, suggesting reforms, and supporting the country in its effort to implement changes for better corporate governance. Corporate governance refers to the structures and processes for the direction and control of companies. Corporate governanc...

  3. Novel Anode Catalyst for Direct Methanol Fuel Cells

    OpenAIRE

    Basri, S.; Kamarudin, S. K.; Daud, W. R. W.; Yaakob, Z.; Kadhum, A. A. H.

    2014-01-01

    PtRu catalyst is a promising anodic catalyst for direct methanol fuel cells (DMFCs) but the slow reaction kinetics reduce the performance of DMFCs. Therefore, this study attempts to improve the performance of PtRu catalysts by adding nickel (Ni) and iron (Fe). Multiwalled carbon nanotubes (MWCNTs) are used to increase the active area of the catalyst and to improve the catalyst performance. Electrochemical analysis techniques, such as energy dispersive X-ray spectrometry (EDX), X-ray diffracti...

  4. Corrosion-Mitigating, Bondable, Fluorinated Barrier Coating for Anodized Magnesium

    Science.gov (United States)

    2016-05-01

    Defense and the automotive and aerospace industries because of their high strength-to-weight ratio. The use of Mg alloys as engineering materials for...Approved for public release; distribution is unlimited. 1 1. Introduction Magnesium (Mg) alloys are of interest to the US Department of...An NEC Pelletron (Model 5SDH-2) was used to conduction RBS analysis of the as received and treated, anodized Mg alloy AZ31B (Technology

  5. Anodic etching of p-type cubic silicon carbide

    Science.gov (United States)

    Harris, G. L.; Fekade, K.; Wongchotigul, K.

    1992-01-01

    p-Type cubic silicon carbide was anodically etched using an electrolyte of HF:HCl:H2O. The etching depth was determined versus time with a fixed current density of 96.4 mA/sq cm. It was found that the etching was very smooth and very uniform. An etch rate of 22.7 nm/s was obtained in a 1:1:50 HF:HCl:H2O electrolyte.

  6. Transplacental transfer of schistosomal circulating anodic antigens in cows

    OpenAIRE

    Gabriël, Sarah; De Bont, J; Phiri, IK; Masuku, M; Riveau, G; Schacht, AM; DEELDER, AM; Van Dam, GJ; Vercruysse, Jozef

    2002-01-01

    The present work investigated the transplacental passage of circulating anodic schistosome antigens (CAA) and the production of foetal antibodies in response to antigenic stimulation in Schistosoma mattheei infected cows. Three groups were available: six calves born to non-infected cows received colostrum from a pool from non-infected cows (group 1), six calves born to non-infected cows (group 2) and six calves born to infected cows (group 3) received colostrum from a pool from infected cows....

  7. Anodized ZnO nanostructures for photoelectrochemical water splitting

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Mao-Chia [Institute of Materials Science and Engineering, National Central University, Taoyuan 32001, Taiwan (China); Wang, TsingHai [Department of Biomedical Engineering and Environment Sciences, National Tsing Hua University, Hsinchu 30013, Taiwan (China); Wu, Bin-Jui [Institute of Materials Science and Engineering, National Central University, Taoyuan 32001, Taiwan (China); Lin, Jing-Chie, E-mail: jclin4046@gmail.com [Institute of Materials Science and Engineering, National Central University, Taoyuan 32001, Taiwan (China); Wu, Ching-Chen [Green Energy and Environment Research Laboratories, Industrial Technology Research Institute, Hsinchu 310, Taiwan (China)

    2016-01-01

    Highlights: • ZnO nanostructures were synthesized by electrochemical anodic process. • The parameter of ZnO nanostructure was anodic potential. • The model of growth of ZnO nanostructure was investigated. - Abstract: Zinc oxide (ZnO) nanostructures were fabricated on the polished zinc foil by anodic deposition in an alkaline solution containing 1.0 M NaOH and 0.25 M Zn(NO{sub 3}){sub 2}. Potentiostatic anodization was conducted at two potentials (−0.7 V in the passive region and −1.0 V in the active region vs. SCE) which are higher than the open circuit potential (−1.03 V vs. SCE) and as-obtained ZnO nanostrcutures were investigated focusing on their structural, optical, electrical and photoelectrochemical (PEC) characteristics. All samples were confirmed ZnO by X-ray photoelectron spectroscopy and Raman spectra. Observations in the SEM images clearly showed that ZnO nanostructures prepared at −0.7 V vs. SCE were composed of nanowires at while those obtained at −1.0 V vs. SCE possessed nanosheets morphology. Result from transmission electron microscope and X-ray diffraction patterns suggested that the ZnO nanowires belonged to single crystalline with a preferred orientation of (0 0 2) whereas the ZnO nanosheets were polycrystalline. Following PEC experiments indicated that ZnO nanowires had higher photocurrent density of 0.32 mA/cm{sup 2} at 0.5 V vs. SCE under 100 mW/cm{sup 2} illumination. This value was about 1.9 times higher than that of ZnO nanosheets. Observed higher photocurrent was likely due to the single crystalline, preferred (0 0 2) orientation, higher carrier concentration and lower charge transfer resistance.

  8. Formation of complex anodic films on porous alumina matrices

    Indian Academy of Sciences (India)

    Unknown

    determined via kinetic data, using Faraday's law: ,. 6 f f. OAl. OAl. 3. 2. 3. 2. Tj,. Q. U. M. F. E......... ∆. ∆. = λ σρ. (3) where F is the Faraday's number, σ the roughness factor. (i.e. the ratio of the real to the geometrical surface), ρAl2O3 the density of the anodic oxide, λ the current efficiency,. MAl2O3 the molar ...

  9. Development of hollow anode penning ion source for laboratory application

    Science.gov (United States)

    Das, B. K.; Shyam, A.; Das, R.; Rao, A. D. P.

    2012-03-01

    The research work presented here focuses for the development of miniature penning type ion source. One hollow anode penning type ion source was developed in our laboratory. The size of the ion source is 38 mm diameter and 55 mm length. The ion source consists of two cathodes, a hollow anode and one piece of rare earth permanent magnet. The plasma was created in the plasma region between cathodes and the hollow anode. The J × B force in the region helps for efficient ionization of the gas even in the high vacuum region˜1×10 -5 Torr. The ions were extracted in the axial direction with help of the potential difference between the electrodes and the geometry of the extraction angle. The effect of the extraction electrode geometry for efficient extraction of the ions from the plasma region was examined. This ion source is a self extracted ion source. The self extracted phenomena reduce the cost and the size of the ion source. The extracted ion current was measured by a graphite probe. An ion current of more than 200 μA was observed at the probe placed 70 mm apart from the extraction electrode. In this paper, the structure of the ion source, effect of operating pressure, potential difference and the magnetic field on the extracted ion current is reported.

  10. Transparent anodes for polymer photovoltaics: Oxygen permeability of PEDOT

    DEFF Research Database (Denmark)

    Andersen, M.; Carlé, Jon Eggert; Cruys-Bagger, N.

    2007-01-01

    The oxygen permeability of the transparent organic anode poly(3,4,-ethylene dioxythiophene) with paratoluenesulphonate as the anion (PEDOT:pTS) was determined to be 2.5 +/- 0.7 x 10(-15) cm(3) (STP) CM cm(-2) S-1 Pa-1, and is thus comparable in magnitude to the oxygen permeability of polyethylene......The oxygen permeability of the transparent organic anode poly(3,4,-ethylene dioxythiophene) with paratoluenesulphonate as the anion (PEDOT:pTS) was determined to be 2.5 +/- 0.7 x 10(-15) cm(3) (STP) CM cm(-2) S-1 Pa-1, and is thus comparable in magnitude to the oxygen permeability...... of polyethyleneterephthalate (PET). The oxygen diffusion through bilayers of polyethylene (PE) and PEDOT:pTS and bilayers of PET and PEDOT:pTS was established. The bilayer structures were applied as the carrier substrate and the transparent anode in polymer-based photovoltaic devices employing a mixture of poly(1-methoxy-4...

  11. Polarization Induced Deterioration of Reinforced Concrete with CFRP Anode.

    Science.gov (United States)

    Zhu, Ji-Hua; Wei, Liangliang; Zhu, Miaochang; Sun, Hongfang; Tang, Luping; Xing, Feng

    2015-07-15

    This paper investigates the deterioration of reinforced concrete with carbon fiber reinforced polymer (CFRP) anode after polarization. The steel in the concrete was first subjected to accelerated corrosion to various extents. Then, a polarization test was performed with the external attached CFRP as the anode and the steel reinforcement as the cathode. Carbon fiber reinforced mortar and conductive carbon paste as contact materials were used to adhere the CFRP anode to the concrete. Two current densities of 1244 and 2488 mA/m², corresponding to the steel reinforcements were applied for 25 days. Electrochemical parameters were monitored during the test period. The deterioration mechanism that occurred at the CFRP/contact material interface was investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques. The increase of feeding voltage and the failure of bonding was observed during polarization process, which might have resulted from the deterioration of the interface between the contact material and CFRP. The formation and accumulation of NaCl crystals at the contact material/CFRP interface were inferred to be the main causes of the failure at the interface.

  12. Recycled diesel carbon nanoparticles for nanostructured battery anodes

    Science.gov (United States)

    Chen, Yuming; Liu, Chang; Sun, Xiaoxuan; Ye, Han; Cheung, Chunshun; Zhou, Limin

    2015-02-01

    Considerable attention has been devoted to using rational nanostructure design to address critical carbonaceous anode material issues for next-generation lithium-ion batteries (LIBs). However, the fabrication of nanostructured carbonaceous anode materials often involves complex processes and expensive starting materials. Diesel engine is an important source of nanostructured carbon particles with diameters ranging 20 nm-60 nm suspended in air, resulting in a serious scourge of global climate and a series of diseases such as lung cancer, asthma, and cardiovascular disease. Here, we show that diesel carbon nanoparticles collected from diesel engines can be chemically activated to create a porous structure. The resulting nanostructured carbon electrodes have a high specific capacity of 936 mAh g-1 after 40 cycles at 0.05 A/g, and excellent cycle stability while retaining a capacity of ∼210 mAh g-1 after 1200 cycles at 5 A/g. As recycled diesel carbon nanoparticles are readily available due to the several billion tons of diesel fuel consumed every year by diesel engines, their use represents an exciting source for nanostructured carbonaceous anode materials for high-performance LIBs and improves our environment and health.

  13. Nanocarbon-Coated Porous Anodic Alumina for Bionic Devices

    Directory of Open Access Journals (Sweden)

    Morteza Aramesh

    2015-08-01

    Full Text Available A highly-stable and biocompatible nanoporous electrode is demonstrated herein. The electrode is based on a porous anodic alumina which is conformally coated with an ultra-thin layer of diamond-like carbon. The nanocarbon coating plays an essential role for the chemical stability and biocompatibility of the electrodes; thus, the coated electrodes are ideally suited for biomedical applications. The corrosion resistance of the proposed electrodes was tested under extreme chemical conditions, such as in boiling acidic/alkali environments. The nanostructured morphology and the surface chemistry of the electrodes were maintained after wet/dry chemical corrosion tests. The non-cytotoxicity of the electrodes was tested by standard toxicity tests using mouse fibroblasts and cortical neurons. Furthermore, the cell–electrode interaction of cortical neurons with nanocarbon coated nanoporous anodic alumina was studied in vitro. Cortical neurons were found to attach and spread to the nanocarbon coated electrodes without using additional biomolecules, whilst no cell attachment was observed on the surface of the bare anodic alumina. Neurite growth appeared to be sensitive to nanotopographical features of the electrodes. The proposed electrodes show a great promise for practical applications such as retinal prostheses and bionic implants in general.

  14. Operational results of pilot cell test with cermet inert'' anodes

    Energy Technology Data Exchange (ETDEWEB)

    Alcorn, T.R.; Tabereaux, A.T.; Richards, N.E. (Reynolds Metals Co., Muscle Shoals, AL (United States). Mfg. Technology Lab.); Windisch, C.F. Jr.; Strachan, D.M. (Pacific Northwest Lab., Richland, WA (United States)); Gregg, J.S.; Frederick, M.S. (ELTECH Research Corp., Fairport Harbor, OH (United States))

    1993-02-01

    The operational performance of a six-pack'' of cermet anodes and corrosion rates was evaluated in a six kA pilot reduction cell at Reynolds' Manufacturing Technology Laboratory. Two separate test periodswere conducted with the cermet anodes; the first period was in conjunction with the Pacific Northwest Laboratory and the second with ELTECH Research Corporation. Both tests used identical NiO-NiFe[sub 2]O[sub 4]-Cu anodes manufactured by Ceramic Magnetics, Inc.. The ELTECH testing involved the in situ coating of the anodes with cerium oxide. Primary evaluations for both test periods were conducted at target conditions of alumina saturation and 0.5 amp/cm[sup 2] anode current density. Individual anodes remained in operation for 25 days during the two and one-half month testing period. Operational difficulties developed throughout the test due to breakage of the anode conductor stems, cracking and breaking of the cermet anodes, unequal anode current distribution, and alumina muck build-up in the cell. These operational problems are discussed as well as an estimate of anode corrosion rates based on metal impurity levels in the aluminum metal pad.

  15. Anode macrostructures influence electricity generation in microbial fuel cells for wastewater treatment.

    Science.gov (United States)

    Ishii, Yoshikazu; Miyahara, Morio; Watanabe, Kazuya

    2017-01-01

    Microbial fuel cells (MFCs) are devices that exploit microbes for generating electricity from organic substrates, including waste biomass and wastewater pollutants. MFCs have the potential to treat wastewater and simultaneously generate electricity. The present study examined how anode macrostructure influences wastewater treatment, electricity generation and microbial communities in MFCs. Cassette-electrode MFCs were equipped with graphite-felt anodes with three different macrostructures, flat-plate (FP), vertical-fin (VF), and horizontal-fin (HF) structures (these were composed of a same amount of graphite felt), and were continuously supplied with artificial wastewater containing starch as the major organic constituent. Polarization analyses revealed that MFCs equipped with VF and HF anodes generated 33% and 21% higher volumetric power densities, respectively, than that of MFCs equipped with FP anodes. Organics were also more efficiently removed from wastewater in MFCs with VF and HF anodes compared to reactors containing FP anodes. In addition, pyrosequencing of PCR-amplified 16S rRNA gene fragments from microbial samples collected from the anodes showed that the presence of fins also affected the bacterial compositions in anode biofilms. Taken together, the findings presented here suggest that the modification of anodes with fins improves organics removal and electricity generation in MFCs. The optimization of anode macrostructure therefore appears to be a promising strategy for improving MFC performance without additional material costs. Copyright © 2016 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  16. Direct operation of Ag-based anode solid oxide fuel cells on propane

    Science.gov (United States)

    Zhang, Yapeng; Yu, Fangyong; Wang, Xiaoqiang; Zhou, Qian; Liu, Jiang; Liu, Meilin

    2017-10-01

    A cermet of sliver and gadolinium-doped ceria (GDC) is investigated as the anode material of solid oxide fuel cells (SOFCs). The SOFCs are operated with hydrogen and dry propane as the fuel and ambient air as the oxidant. Their electrochemical and durability performances are tested and compared to those of SOFCs with conventional Ni-GDC anode. Experimental results show that performances of the SOFCs, respectively with Ag-GDC and Ni-GDC anode, are similar when operated on hydrogen, while quite different on propane. The open circuit voltage (OCV) of a SOFC with Ag-GDC anode is stable at ∼1 V while that with Ni-GDC anode continuously drops from the initial 1.2 V-0.85 V in 140 min. A SOFC with Ag-GDC anode has been stably operated on propane at a constant current density of 103 mA cm-2 for more than 160 h while that with Ni-GDC anode for only 50 h. SEM examination shows Ni-GDC anode is destroyed by carbon deposition during operation on propane, while Ag-GDC anode is well conserved and has a carbon layer, with some breakages, built on its surface. Mechanisms of the stable operation of SOFCs with Ag-GDC anode on dry propane is investigated and analyzed.

  17. Effect of zinc addition on the performance of aluminium alloy sacrificial anode for marine application

    Science.gov (United States)

    Khan, Bharvez; Rosli, M. U.; Jahidi, H.; Ishak, Muhammad Ikman; Zakaria, M. S.; Jamalludin, Mohd Riduan; Khor, C. Y.; Faizal, W. M.; Rahim, W. M.; Nawi, M. A. M.

    2017-09-01

    In this work, the effect of zinc addition on the performance of aluminum-based sacrificial anode in seawater was investigated. The parameters used in assessing the performance of the cast anodes are anodic efficiency, protection efficiency and polarized potential. The content of zinc in the anodes was varied after die casting. The alloys produced were tested as sacrificial anode for the protection of mild steel for marine application at room temperature. Factors such as reactivity of zinc particles in the seawater, corrosion activity during the period of experiment, pH of seawater and the electronegativity potential of zinc were collected for analysis. Overall findings shows addition of zinc increases rate of corrosion to the sacrificial anode and the protection offered by the sacrificial anodes measured and collected in PIT shows the seawater react to sacrificial anode and no porosity reaction between the anodes. The microstructure showed the intermetallic structures of β-phase which breakdown the alumina passive film, thus enhancing the anode efficiency.

  18. Solvent effects on the morphology and performance of the anode substrates for solid oxide fuel cells

    Science.gov (United States)

    Liu, Tong; Ren, Cong; Zhang, Yanxiang; Wang, Yao; Lei, Libin; Chen, Fanglin

    2017-09-01

    Solvents effects on the microstructure of anode substrates as well as the electrochemical performance of the respective cells are systematically evaluated. The solubility parameters are used to interpret the relationship between the rheological properties of phase inversion slurries and pore formation mechanism of the anode substrates. When N-methyl-2-pyrrolidone (NMP) is chosen as the solvent, a dual-layered anode substrates with hierarchically oriented pores is achieved, while a sponge-like homogeneous anode substrate is obtained using dimethyl sulfoxide (DMSO) as the solvent, indicating that solvent is a key factor to affect the anode substrate microstructure. Two-dimensional and three-dimensional microstructures of the anode substrates prepared using NMP are analyzed by scanning electron microscopy and X-ray microscopy, respectively. Solid oxide fuel cells (SOFCs) with different microstructured anode substrates are prepared, and the maximum power density is significantly enhanced from 320.3 to 719.2 mWcm-2 by varying the anode substrate from homogeneous sponge-like microstructure to dual-layered microstructure, revealing that the finger-like macro-voids layer can facilitate H2-H2O mass diffusion, while the thin sponge-like pores layer can serve as anode functional layer and provide sufficient active reaction sites for H2 oxidation. This study demonstrates that NMP is a promising solvent to fabricate hierarchically oriented anode for high-performance SOFCs application.

  19. Structure of anodized Al–Zr sputter deposited coatings and effect on optical appearance

    Energy Technology Data Exchange (ETDEWEB)

    Gudla, Visweswara Chakravarthy [Department of Mechanical Engineering, Technical University of Denmark, DK-2800 Kgs. Lyngby (Denmark); Canulescu, Stela [Department of Photonics Engineering, Technical University of Denmark, DK-4000 Roskilde (Denmark); Shabadi, Rajashekhara [Unité Matériaux et Transformations, Université Lille1, 59655 Villeneuve ‘Ascq (France); Rechendorff, Kristian [Tribology Centre, Danish Technological Institute, DK-8000 Århus C (Denmark); Dirscherl, Kai [Danish Fundamental Metrology, DK-2800 Kgs., Lyngby (Denmark); Ambat, Rajan, E-mail: ram@mek.dtu.dk [Department of Mechanical Engineering, Technical University of Denmark, DK-2800 Kgs. Lyngby (Denmark)

    2014-10-30

    Highlights: • Microstructure of magnetron sputtered Al–Zr coatings on AA6060 under as coated and heat treated condition. • Effect of heat treatment and precipitation of Al–Zr–Si (τ{sub 1}) phase on optical appearance of anodized layer. • Partial oxidation of τ{sub 1} precipitates after anodizing and relation to darkening of the anodized layer. • Oxidized region of τ{sub 1} precipitates was amorphous while unoxidized region retained crystallinity. • Unoxidized metallic τ{sub 1} in amorphous anodic alumina acts as light absorption centres and causes darkening after anodizing. - Abstract: The mechanism of interaction of light with the microstructure of anodized layer giving specific optical appearance is investigated using Al–Zr sputter deposited coating as a model system on an AA6060 substrate. Differences in the oxidative nature of various microstructural components result in the evolution of typical features in the anodized layer, which are investigated as a function of microstructure and correlated with its optical appearance. The Zr concentration in the coating was varied from 6 wt.% to 23 wt.%. Heat treatment of the coated samples was carried out at 550 °C for 4 h in order to evolve Al–Zr based second phase precipitates in the microstructure. Anodizing was performed using 20 wt.% sulphuric acid at 18 °C with an intention to study the effect of anodizing on the Al–Zr based precipitates in the coating. Detailed microstructural characterization of the coating and anodized layer was carried out using high resolution scanning and transmission electron microscopy, grazing incidence X-ray diffraction analysis, glow discharge optical emission spectroscopy, and optical appearance using spectrophotometry. The evolution of microstructure in the anodized layer as a function of anodizing parameters and their influence on the interaction of light is investigated and the results in general are applicable to discolouration of anodized layer on

  20. Competence, governance, and entrepreneurship

    DEFF Research Database (Denmark)

    Foss, Nicolai Juul; Mahnke, Volker

    This title illustrates modern economics. Because it informs strategic choices, it is relevant to business administration in general, and for strategic management in particular. Two dominant streams may be identified in the literature, namely the "competence" and "governance" perspectives......, what determines their boundaries and internal organization), but would also be helpful for informing strategy issues, such as understanding strategic flexibility, strategic options, and the sources of competitive advantage. This volume brings together prominent voices on competence, governance...... on the firm. While there has been little direct discussion between the main proponents of these perspectives, both claim that they are reaching for a "strategic theory of the firm". Such a theory would not only shed light on the classical questions considered in the theory of the firm (e.g. why firms exist...

  1. Governance by algorithms

    Directory of Open Access Journals (Sweden)

    Francesca Musiani

    2013-08-01

    Full Text Available Algorithms are increasingly often cited as one of the fundamental shaping devices of our daily, immersed-in-information existence. Their importance is acknowledged, their performance scrutinised in numerous contexts. Yet, a lot of what constitutes 'algorithms' beyond their broad definition as “encoded procedures for transforming input data into a desired output, based on specified calculations” (Gillespie, 2013 is often taken for granted. This article seeks to contribute to the discussion about 'what algorithms do' and in which ways they are artefacts of governance, providing two examples drawing from the internet and ICT realm: search engine queries and e-commerce websites’ recommendations to customers. The question of the relationship between algorithms and rules is likely to occupy an increasingly central role in the study and the practice of internet governance, in terms of both institutions’ regulation of algorithms, and algorithms’ regulation of our society.

  2. Auditing IT Governance

    Directory of Open Access Journals (Sweden)

    Florin-Mihai ILIESCU

    2010-01-01

    Full Text Available Effective IT governance helps ensure that IT supports business goals, optimizes business investment in IT, and appropriately manages IT-related risks and opportunities. Organizations that realize the IT is no longer a support process and embeds value and risks need a structured approach for better managing Information Technology, enable its capability to deliver added value enterprise wide and for setting up a risk management program to address new risks arising for usage of IT in business processes. In order to assess if IT Governance is in line with industry practices, IT Auditors need a good understanding of processes and applicable standards, particular audit work programs and experience in assessing potential problem indicators.

  3. Website Quality in Government

    DEFF Research Database (Denmark)

    Sørum, Hanne; Andersen, Kim Normann; Clemmensen, Torkil

    2013-01-01

    . Social implications – The overall digital enabled transformation of government appears to be guided by a rather heterogeneous set of quality standards. While a variance of quality standards might stimulate innovation in websites, it can also lead to a substantial difference in digital services provided......Purpose – The objective of this paper is to investigate how webmasters within government bodies explain quality of websites. Despite the central position for advancing the communication, bridging usability tests and design, there are surprisingly few studies on how webmasters perceive, experience...... and explain website quality or design issues. Design/methodology/approach – The authors' unit of analysis is webmasters from Norwegian web-award-winning organizations. Eight webmasters from four types of websites were interviewed. The websites were purposefully sampled, using the strategy of maximal variation...

  4. Whole of Government Accounts

    DEFF Research Database (Denmark)

    Pontoppidan, Caroline Aggestam; Chow, Danny; Day, Ronald

    for influence. We highlight three arenas where such contests are being played out: 1. Statistical versus GAAP notions of accounting value, which features in all accounting debates over the merits and costs of ex-ante versus ex-post notions of value (i.e., the relevance versus reliability debate); 2. Private......In our comparative study, we surveyed an emerging literature on the use of consolidation in government accounting and develop a research agenda. We find heterogeneous approaches to the development of consolidation models across the five countries (Australia, New Zealand, UK, Canada and Sweden...... of financial reporting (GAAP)-based reforms when compared with budget-centric systems of accounting, which dominate government decision-making. At a trans-national level, there is a need to examine the embedded or implicit contests or ‘trials of strength’ between nations and/or institutions jockeying...

  5. Banking governance: New Approaches

    Directory of Open Access Journals (Sweden)

    Victor Mihăiţă Duţă

    2016-11-01

    Full Text Available Banks are companies like any other. However, banks are distinguished by certain intrinsic characteristics of companies that have a different impact on the motivation of stakeholders. Among these features, we mention:partnership and shareholders governance agreements; banks are heavily regulated companies; banking assets is the main source of haze banking and information asymmetry; between the bank and depositors there is a problem of moral hazard.

  6. Government and Health Policy,

    Science.gov (United States)

    1982-02-01

    interests and pressures of others. Perhaps for these reasons, the eminent economist John Maynard Keynes once noted that, "The power of vested interests...subsidies, medical school subsidies and loans to students, and tax-exempt status of hospitals are but a few examples of government changing input or...planners. Loans to medical students tied to the promise of rural practice are one policy tool used. Subsidies to medical schools contingent on

  7. Shared Health Governance

    Science.gov (United States)

    Ruger, Jennifer Prah

    2014-01-01

    Health and Social Justice (Ruger 2009a) developed the “health capability paradigm,” a conception of justice and health in domestic societies. This idea undergirds an alternative framework of social cooperation called “shared health governance” (SHG). SHG puts forth a set of moral responsibilities, motivational aspirations, and institutional arrangements, and apportions roles for implementation in striving for health justice. This article develops further the SHG framework and explains its importance and implications for governing health domestically. PMID:21745082

  8. Pension Fund Governing Board

    CERN Multimedia

    HR Department

    2008-01-01

    Note The CERN pension scheme is based on the principle of defined benefits, so beneficiaries continue to receive the benefits to which they are entitled in accordance with the Rules of the Pension Fund. This means that pension entitlements under the Rules are not directly affected by the financial crisis and the current economic situation. However, the adjustment of pensions to the cost of living is not automatic and, under the method applied since 2006, must take into account the Fund’s financial position. Meeting of the Pension Fund Governing Board The Pension Fund Governing Board held its eighth meeting at ESO in Garching (near Munich), Germany on 24 October 2008. Before starting its work, the Governing Board had the privilege of hearing an opening address by Professor Tim de Zeeuw, the Director General of ESO. Professor de Zeeuw described the mission of ESO and the ambitious projects of his organisation, which performs astronomy observations using telescopes located in Chile. The Director-General receiv...

  9. Educational Governance Today

    Directory of Open Access Journals (Sweden)

    Christoph Behrens

    2014-08-01

    Full Text Available In the communication and knowledge based global village, under the conditions of dynamic Change in an economy driven world, education has become a complex and challenging endeavor, both for individuals and organizations. Learning has changed dramatically: knowledge and skills are quickly outdated and devaluated, giving education a new meaning within an individual biography; schools, universities and other providers of education go through organizational revolutions, who are challenging their self-concept and management; governments are under pressure to reshape Educational Governance according to new paradigms with the overall goal to sustain national or regional competitiveness. Are key actors in the education system ready to face these challenges and to modernize their organizations? Starting from an overview on the Complexity of Learning in modern societies, generalizable consequences are reviewed in a case study on Germany. It leads to a framework for a necessary research project in countries such as Indonesia, which are still ahead of educational reform. The focus is on the organizational meso and macro level that is playing the key role in Educational Governance.

  10. Alliages intermétalliques du magnésium, anodes pour MAFC ? Magnesium intermetallic alloys, anodes for MAFC?

    Directory of Open Access Journals (Sweden)

    Montagné Pierre

    2013-11-01

    Full Text Available Des composés intermétalliques sélectionnés ont été étudiés en vue d'une utilisation en remplacement de l'anode métallique dans des batteries de type métal air. Ces composés présentent des structures cristallines très différentes : structure lamellaire pour MgB2, structure covalente simple pour Mg2Si et structure complexe basée sur un empilement compact de polyèdres pour Mg2Al3. Les meilleurs résultats sont obtenus pour ce dernier composé avec une réactivité vis-à-vis des électrolytes testés sensiblement inférieure à celle du magnésium et une cinétique de réaction plus lente. Le potentiel en fonctionnement au sein de la batterie est sensiblement plus faible que celui du magnésium mais il présente une stabilité remarquable au cours du temps. Selected intermetallic compounds have been studied as anodic materials in metal air fuel cells. These compounds have different structural types, MgB2 displays a lamellar structure, Mg2Si a simple covalent structure while Mg2Al3 has a complex structure based on compact polyhedral packing. Best electrochemical results are obtained for the latter, with a lower reactivity towards magnesium in the two electrolytes and with lower kinetics of reaction. The operating potential of the battery with a Mg2Al3 anode is noticeably lower than with a Mg anode, but it presents a very good stability over time.

  11. Carbon Nanofibers Modified Graphite Felt for High Performance Anode in High Substrate Concentration Microbial Fuel Cells

    Science.gov (United States)

    Shen, Youliang; Zhou, Yan; Chen, Shuiliang; Yang, Fangfang; Zheng, Suqi; Hou, Haoqing

    2014-01-01

    Carbon nanofibers modified graphite fibers (CNFs/GF) composite electrode was prepared for anode in high substrate concentration microbial fuel cells. Electrochemical tests showed that the CNFs/GF anode generated a peak current density of 2.42 mA cm−2 at a low acetate concentration of 20 mM, which was 54% higher than that from bare GF. Increase of the acetate concentration to 80 mM, in which the peak current density of the CNFs/GF anode greatly increased and was up to 3.57 mA cm−2, was seven times as that of GF anode. Morphology characterization revealed that the biofilms in the CNFs/GF anode were much denser than those in the bare GF. This result revealed that the nanostructure in the anode not only enhanced current generation but also could tolerate high substrate concentration. PMID:24883348

  12. Carbon nanofibers modified graphite felt for high performance anode in high substrate concentration microbial fuel cells.

    Science.gov (United States)

    Shen, Youliang; Zhou, Yan; Chen, Shuiliang; Yang, Fangfang; Zheng, Suqi; Hou, Haoqing

    2014-01-01

    Carbon nanofibers modified graphite fibers (CNFs/GF) composite electrode was prepared for anode in high substrate concentration microbial fuel cells. Electrochemical tests showed that the CNFs/GF anode generated a peak current density of 2.42 mA cm(-2) at a low acetate concentration of 20 mM, which was 54% higher than that from bare GF. Increase of the acetate concentration to 80 mM, in which the peak current density of the CNFs/GF anode greatly increased and was up to 3.57 mA cm(-2), was seven times as that of GF anode. Morphology characterization revealed that the biofilms in the CNFs/GF anode were much denser than those in the bare GF. This result revealed that the nanostructure in the anode not only enhanced current generation but also could tolerate high substrate concentration.

  13. Long-term performance of sediment microbial fuel cells with multiple anodes.

    Science.gov (United States)

    Zhao, Qing; Ji, Min; Li, Ruying; Ren, Zhiyong Jason

    2017-08-01

    This study constructed multiple-anode SMFCs with different anode spacing and investigated their long-term performance. Results show that multiple anodes extended electricity generation from SMFCs due to increased anode surface area, but the distance between the anodes showed limited effects on power output. Power generation was seriously inhibited when temperature was below 20°C, but system recovered once temperature rose based to ambient condition. The degradation of readily oxidizable organic matter (ROOM) and decomposition of refractory organics occurred simultaneously. Worms' growth in the sediment destabilized power output, caused the increase of COD and decrease of pH and DO in water layer, and affected the microbial communities in sediments. ANME-2D related to anaerobic oxidation of methane was enriched around anodes and might benefit electron transfer in SMFCs. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Anodic Oxidation of Carbon Steel at High Current Densities and Investigation of Its Corrosion Behavior

    Science.gov (United States)

    Fattah-Alhosseini, Arash; Khan, Hamid Yazdani

    2017-06-01

    This work aims at studying the influence of high current densities on the anodization of carbon steel. Anodic protective coatings were prepared on carbon steel at current densities of 100, 125, and 150 A/dm2 followed by a final heat treatment. Coatings microstructures and morphologies were analyzed using X-ray diffraction (XRD) and scanning electron microscope (SEM). The corrosion resistance of the uncoated carbon steel substrate and the anodic coatings were evaluated in 3.5 wt pct NaCl solution through electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization measurements. The results showed that the anodic oxide coatings which were prepared at higher current densities had thicker coatings as a result of a higher anodic forming voltage. Therefore, the anodized coatings showed better anti-corrosion properties compared to those obtained at lower current densities and the base metal.

  15. Analysis of Cadmium in Undissolved Anode Materials of Mark-IV Electrorefiner

    Energy Technology Data Exchange (ETDEWEB)

    Tae-Sic Yoo; Guy L. Fredrickson; DeeEarl Vaden; Brian R. Westphal

    2013-10-01

    The Mark-IV electrorefiner (Mk-IV ER) contains an electrolyte/molten cadmium system for refining uranium electrochemically. Typically, the anode of the Mk-IV ER consists of the chopped sodium-bonded metallic driver fuels, which have been primarily U-10Zr binary fuels. Chemical analysis of the residual anode materials after electrorefining indicates that a small amount of cadmium is removed from the Mk-IV ER along with the undissolved anode materials. Investigation of chemical analysis data indicates that the amount of cadmium in the undissolved anode materials is strongly correlated with the anode rotation speeds and the residence time of the anode in the Mk-IV ER. Discussions are given to explain the prescribed correlation.

  16. Study of surface properties of TiO2 — NTs films at different anodizing conditions

    Directory of Open Access Journals (Sweden)

    Timur Serikov

    2015-09-01

    Full Text Available Electrochemical anodizing titanium metal in the fluorine-containing electrolyte to produce nanotubes of titanium dioxide. The surface morphology of the films was investigated by scanning electron microscopy. It was found that with increasing anodizing voltage increasing inner diameter growth rate and distance interporous nanotubes. The method of adsorption and desorption of nitrogen studied the distribution of pore volume. Measured by a specific surface area of titanium dioxide films for determine the conditions of anodizing on their changes.

  17. Scaling up aqueous processing of A-site deficient strontium titanate for SOFC anode supports

    DEFF Research Database (Denmark)

    Verbraeken, Maarten C.; Sudireddy, Bhaskar Reddy; Vasechko, Viacheslav

    2017-01-01

    All ceramic anode supported half cells of technically relevant scale were fabricated in this study, using a novel strontium titanate anode material. The use of this material would be highly advantageous in solid oxide fuel cells due to its redox tolerance and resistance to coking and sulphur...... between powder suppliers, and batches of the same supplier, is critical for the successful implementation of ceramic anode supported solid oxide fuel cells....

  18. Silicon oxide based high capacity anode materials for lithium ion batteries

    Science.gov (United States)

    Deng, Haixia; Han, Yongbong; Masarapu, Charan; Anguchamy, Yogesh Kumar; Lopez, Herman A.; Kumar, Sujeet

    2017-03-21

    Silicon oxide based materials, including composites with various electrical conductive compositions, are formulated into desirable anodes. The anodes can be effectively combined into lithium ion batteries with high capacity cathode materials. In some formulations, supplemental lithium can be used to stabilize cycling as well as to reduce effects of first cycle irreversible capacity loss. Batteries are described with surprisingly good cycling properties with good specific capacities with respect to both cathode active weights and anode active weights.

  19. Ni/YSZ anode – Effect of pre-treatments on cell degradation and microstructures

    DEFF Research Database (Denmark)

    Hauch, Anne; Jørgensen, Peter Stanley; Brodersen, Karen

    2011-01-01

    Anode supported (Ni/YSZ–YSZ–LSM/YSZ) solid oxide fuel cells were tested and the degradation over hundreds of hours was monitored and analyzed by impedance spectroscopy. Test conditions were chosen to focus on the Ni/YSZ anode degradation and all tests were operated at 750°C, a current density of 0...... showed significant differences in the area fractions of percolating nickel both in the active anode and support layer....

  20. Alignment between business process governance and IT governance

    OpenAIRE

    Rahimi, Fatemeh; Møller, Charles; Hvam, Lars

    2014-01-01

    The importance of business processes and the increasing centrality of IT to an organization's performance have called for a specific focus on business process governance and IT governance in contemporary enterprises. Despite the wide scope of business process management, which covers both business and IT domains, and the profound impact of IT on process innovations, the association between business process governance and IT governance remains under-explored. Analyzing the constituting element...

  1. Knowledge and Governance

    DEFF Research Database (Denmark)

    Foss, Nicolai Juul

    Assumptions about the knowledge held by economic agents have been an integral part of the theory of economic organization since its inception. However, recent work—here called “knowledge governance”—has more explicitly highlighted knowledge as both an independent and dependent variable. Thus......, knowledge may also be seen as being caused by governance mechanisms and structures; specifically, incentives, allocations of decision rights, organizational structure and so on influence the search for knowledge, and the creation, sharing and integration of knowledge. More philosophically, the concern...

  2. 'Joined Up' Local Governments?

    DEFF Research Database (Denmark)

    Bjørnå, Hilde; Casale, Donatella; Hajnal, Gyorgy

    of such studies and comparative studies are lacking. With this, we ask how can local JUG initiatives be explained and what lessons can be drawn from a comparative perspective? Drawing on some components from the framework by Pollitt and Bouckaert (2011) for public management reforms, we analyse JUG reforms in six....... forthc. 2015, Lægreid et al. 2014, Pollitt 2003). A growing body of research analyses JUG initiatives in several countries, but often in the form of single-case studies with central government focus (see e.g. Talbot 2011 or Lægreid et al. 2014). On municipal level, however, there is only a scarce number...

  3. E-Government for Good Governance in Developing Countries ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2014-05-01

    May 1, 2014 ... E-Government for Good Governance in Developing Countries provides practical supporting material on information and communication technologies for development (ICT4D), specifically, e-government implementation. In this book, Kettani and Moulin develop their findings and methods from the eFez ...

  4. Infiltrated SrTiO3:FeCr-based anodes for metalsupported SOFC

    DEFF Research Database (Denmark)

    Blennow Tullmar, Peter; Persson, Åsa Helen; Nielsen, Jimmi

    electronically conducting layers, into which electrocatalytically active materials are infiltrated after sintering. This paper presents the first results on single cell testing of 25 cm2 cells with 16 cm2 active area of a metal-supported SOFC were the anode backbone consists of a composite of Nbdoped SrTiO3 (STN...... changes occurring in the anode layer during testing. The results indicate that the STN component in the anode seems to have a positive effect on the corrosion stability of the FeCr-particles in the anode layer....

  5. Infiltrated SrTiO3:FeCr-based anodes for metalsupported SOFC

    DEFF Research Database (Denmark)

    Blennow Tullmar, Peter; Persson, Åsa Helen; Nielsen, Jimmi

    2012-01-01

    electronically conducting layers, into which electrocatalytically active materials are infiltrated after sintering. This paper presents the first results on single cell testing of 25 cm2 cells with 16 cm2 active area of a metal-supported SOFC were the anode backbone consists of a composite of Nbdoped SrTiO3 (STN...... changes occurring in the anode layer during testing. The results indicate that the STN component in the anode seems to have a positive effect on the corrosion stability of the FeCr-particles in the anode layer....

  6. The Potential of Acousto-Ultrasonic Techniques for Inspection of Baked Carbon Anodes

    Directory of Open Access Journals (Sweden)

    Moez Ben Boubaker

    2016-07-01

    Full Text Available High quality baked carbon anodes contribute to the optimal performance of aluminum reduction cells. However, the currently decreasing quality and increasing variability of anode raw materials (coke and pitch make it challenging to manufacture the anodes with consistent overall quality. Intercepting faulty anodes (e.g., presence of cracks and pores before they are set in reduction cells and deteriorate their performance is therefore important. This is a difficult task, even in modern and well-instrumented anode plants, because lab testing using core samples can only characterize a small proportion of the anode production due to the costly, time-consuming, and destructive nature of the analytical methods. In addition, these results are not necessarily representative of the whole anode block. The objective of this work is to develop a rapid and non-destructive method for quality control of baked anodes using acousto-ultrasonic (AU techniques. The acoustic responses of anode samples (sliced sections were analyzed using a combination of temporal features computed from AU signals and principal component analysis (PCA. The AU signals were found sensitive to pores and cracks and were able to discriminate the two types of defects. The results were validated qualitatively by submitting the samples to X-ray Computed Tomography (CT scan.

  7. Full Ceramic Fuel Cells Based on Strontium Titanate Anodes, An Approach Towards More Robust SOFCs

    DEFF Research Database (Denmark)

    Holtappels, Peter; Irvine, J.T.S.; Iwanschitz, B.

    2013-01-01

    The persistent problems with Ni-YSZ cermet based SOFCs, with respect to redox stability and tolerance towards sulfur has stimulated the development of a full ceramic cell based on strontium titanate(ST)- based anodes and anode support materials, within the EU FCH JU project SCOTAS-SOFC. Three...... intact and tolerant to redox cycles, cell performance degradation appears linked to the infiltrated electro catalysts. The materials have also been assessed with respect to their electrical and mechanical properties, in order to further evaluate their potential use as anode and anode support layers...

  8. Sulfur Poisoning of SOFC Anodes: Effect of Overpotential on Long-Term Degradation

    DEFF Research Database (Denmark)

    Hauch, Anne; Hagen, Anke; Hjelm, Johan

    2014-01-01

    Sulfur impurities in carbon containing fuels for solid oxide fuel cells (SOFC), e.g. natural gas and biogas, typically lead to significant losses in performance due to the sulfur sensitivity of Ni/yttria-stabilized-zirconia (YSZ) anodes for SOFC. Full cells having Ni/YSZ anodes have been characte......Sulfur impurities in carbon containing fuels for solid oxide fuel cells (SOFC), e.g. natural gas and biogas, typically lead to significant losses in performance due to the sulfur sensitivity of Ni/yttria-stabilized-zirconia (YSZ) anodes for SOFC. Full cells having Ni/YSZ anodes have been...

  9. Formation of self-organized nanoporous anodic oxide from metallic gallium.

    Science.gov (United States)

    Pandey, Bipin; Thapa, Prem S; Higgins, Daniel A; Ito, Takashi

    2012-09-25

    This paper reports the formation of self-organized nanoporous gallium oxide by anodization of solid gallium metal. Because of its low melting point (ca. 30 °C), metallic gallium can be shaped into flexible structures, permitting the fabrication of nanoporous anodic oxide monoliths within confined spaces like the inside of a microchannel. Here, solid gallium films prepared on planar substrates were employed to investigate the effects of anodization voltage (1, 5, 10, 15 V) and H(2)SO(4) concentration (1, 2, 4, 6 M) on anodic oxide morphology. Self-organized nanopores aligned perpendicular to the film surface were obtained upon anodization of gallium films in ice-cooled 4 and 6 M aqueous H(2)SO(4) at 10 and 15 V. Nanopore formation could be recognized by an increase in anodic current after a current decrease reflecting barrier oxide formation. The average pore diameter was in the range of 18-40 nm with a narrow diameter distribution (relative standard deviation ca. 10-20%), and was larger at lower H(2)SO(4) concentration and higher applied voltage. The maximum thickness of nanoporous anodic oxide was ca. 2 μm. In addition, anodic formation of self-organized nanopores was demonstrated for a solid gallium monolith incorporated at the end of a glass capillary. Nanoporous anodic oxide monoliths formed from a fusible metal will lead to future development of unique devices for chemical sensing and catalysis.

  10. Environmental friendly anodizing of AZ91D magnesium alloy in alkaline borate-benzoate electrolyte

    Energy Technology Data Exchange (ETDEWEB)

    Liu Yan [Department of Chemistry, Zhejiang University, Hangzhou 310027 (China); Department of Chemistry, Tianshui Normal University, Tianshui 741000 (China); Wei Zhongling [Magnesium Technology Co., Ltd., Chinese Academy of Sciences, Jiaxing 314051 (China); Yang Fuwei [Department of Chemistry, Tianshui Normal University, Tianshui 741000 (China); Zhang Zhao, E-mail: eaglezzy@zjuem.zju.edu.cn [Department of Chemistry, Zhejiang University, Hangzhou 310027 (China); Key Laboratory for Light Alloy Materials Technology, Jiaxing 314051 (China)

    2011-06-02

    Highlights: > Environmental friendly PEO technology for AZ91 magnesium alloy is developed. > NaBz is used as new additive and it is low-cost and environmental friendly. > The effect of NaBz additive on the properties of the anodized film was studied. > Anodized film with excellent corrosion resistance is obtained. > The forming mechanism of anodized film in the presence of NaBz is approached. - Abstract: A kind of environmental friendly anodizing routine for AZ91D magnesium alloy, based on an alkaline borate-sodium benzoate electrolyte (NaBz) was studied. The effect of NaBz on the properties of the anodized film was investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive spectrometry (EDS), potentiodynamic polarization and electrochemical impedance spectroscopy (EIS), respectively. The results showed that the anodizing process, surface morphology, thickness, phase structure and corrosion resistance of the anodized film were strongly dependent on the concentration of NaBz. In the presence of adequate NaBz, a thick, compact and smoothing anodized film with excellent corrosion resistance was produced. Moreover, the forming mechanism of the anodized film in the presence of NaBz additive was also approached, which was a suppression of arc discharge process by the adsorption of Bz{sup -} on the surface of magnesium alloy substrate.

  11. The impact of anode acclimation strategy on microbial electrolysis cell treating hydrogen fermentation effluent

    DEFF Research Database (Denmark)

    Li, Xiaohu; Zhang, Ruizhe; Qian, Yawei

    2017-01-01

    The impact of different anode acclimation methods for enhancing hydrogen production in microbial electrolysis cell (MEC) was investigated in this study. The anodes were first acclimated in microbial fuel cells using acetate, butyrate and corn stalk fermentation effluent (CSFE) as substrate before......). The current density (480 ± 11 A/m3) and hydrogen production rate (4.52 ± 0.13 m3/m3/d) with the anode pre-acclimated with butyrate were also higher that another two reactors. These results demonstrated that the anode biofilm pre-acclimated with butyrate has significant advantages in CSFE treatment and could...

  12. Application of hollow anodes in a Hall thruster with double-peak magnetic fields

    Science.gov (United States)

    Ding, Yongjie; Sun, Hezhi; Li, Peng; Wei, Liqiu; Su, Hongbo; Peng, Wuji; Li, Hong; Yu, Daren

    2017-08-01

    A low-power Hall thruster was designed with two permanent magnet rings. Unlike conventional Hall thrusters, this one has a symmetrical double-peak magnetic field with a larger gradient. Moreover, the highest magnetic field strength appears in the plume region; hence, the distance from the zero-magnetic region to the channel outlet is shorter than that of other Hall thrusters. This paper presents the law and mechanism of the effect of a U-shaped hollow anode with the front end in the zero-magnetic region and anodes at the first magnetic peak and zero-magnetic point (corresponding to the front and rear end faces of the U-shaped anode, respectively) on the discharge characteristics of the thruster. The study shows that the overall performance of the hollow anode under the same operating conditions is the highest. For the anode at the magnetic peak, although the ionization rate is the highest, most of the ions generated by ionization collide with the walls, causing greater energy loss and minimizing its performance. For the anode at the zero-magnetic point, although its maximum ionization rate is higher than that of the hollow anode, and the power deposition on the walls is slightly smaller, its propellant utilization and voltage utilization are lower than those of the hollow anode; furthermore, its overall performance is poorer than that of the hollow anode because of the short channel and shorter ionization region.

  13. Nanoporous anodic aluminum oxide with a long-range order and tunable cell sizes by phosphoric acid anodization on pre-patterned substrates

    Science.gov (United States)

    Surawathanawises, Krissada; Cheng, Xuanhong

    2014-01-01

    Nanoporous anodic aluminum oxide (AAO) has been explored for various applications due to its regular cell arrangement and relatively easy fabrication processes. However, conventional two-step anodization based on self-organization only allows the fabrication of a few discrete cell sizes and formation of small domains of hexagonally packed pores. Recent efforts to pre-pattern aluminum followed with anodization significantly improve the regularity and available pore geometries in AAO, while systematic study of the anodization condition, especially the impact of acid composition on pore formation guided by nanoindentation is still lacking. In this work, we pre-patterned aluminium thin films using ordered monolayers of silica beads and formed porous AAO in a single-step anodization in phosphoric acid. Controllable cell sizes ranging from 280 nm to 760 nm were obtained, matching the diameters of the silica nanobead molds used. This range of cell size is significantly greater than what has been reported for AAO formed in phosphoric acid in the literature. In addition, the relationships between the acid concentration, cell size, pore size, anodization voltage and film growth rate were studied quantitatively. The results are consistent with the theory of oxide formation through an electrochemical reaction. Not only does this study provide useful operational conditions of nanoindentation induced anodization in phosphoric acid, it also generates significant information for fundamental understanding of AAO formation. PMID:24535886

  14. Steuern und Governance

    Directory of Open Access Journals (Sweden)

    Eduard Müller

    2014-05-01

    Full Text Available ENGLISH: Taxation, in the modern state, has long been a mass phenomenon with an interdisciplinary outlook. On the macro level of the state, a new generation of administrative reforms has crystallized under the label “good public governance”. These reforms seek to resolve regulatory interdependence of state and non - state actors by way of cooperation and interaction. In parallel, on the micro level of businesses, “corporate governance” – voluntary compliance with legal and ethical standards – has become an increasingly important issue. With a view to tax law and tax collection, these developments open up new possibilities to raise tax compliance by means of consensual and cooperative instruments and, accordingly, address taxation as a mass phenomenon. DEUTSCH: Besteuerung ist im modernen Staat ein Massenphänomen und längst interdisziplinär ausgerichtet. Auf der Makro-Ebene des Staates hat sich unter dem Begriff Good Public Governance eine neue Generation von Staats- und Verwaltungsreformen herausgebildet, die Regelungsbeziehungen von staatlichen und nichtstaatlichen Akteuren durch Kooperationen und Interaktionen zu lösen versucht. Parallel dazu hat auf der Mikro-Ebene der Unternehmen mit dem Thema Corporate Governance die freiwillige Einhaltung von rechtlichen und ethischen Regeln an Bedeutung gewonnen. Für das Steuerrecht und den Steuervollzug resultieren aus diesen Entwicklungen neue Möglichkeiten, durch Nutzung konsens- und kooperationsorientierter Instrumente die Tax Compliance zu erhöhen und so dem Massenphänomen Besteuerung gerecht zu werden.

  15. Open Government Data Publication Methodology

    National Research Council Canada - National Science Library

    Jan Kucera

    2015-01-01

    .... Open Government Data (OGD) initiatives aim at increasing availability of machine-readable data provided under an open license and therefore these initiatives might facilitate re-use of the government data which in turn might...

  16. Corporate Governance in Costa Rica

    OpenAIRE

    Gilberto E. Arce; Edgar Robles C.

    2005-01-01

    This paper examines corporate governance practices in Costa Rica. First, it estimates corporate governance charter measures using firm-level data for 87 Costa Rican firms and studies their impact on the firms` performance; here, the mean of the corporate governance charters for the publicly traded firms is equal to 56. 14. Second, new evidence is presented on de jure and de facto corporate governance charter measures at the firm level and on their effect on the performance of the firm. The re...

  17. Business process management governance model

    OpenAIRE

    Stenšak, Jožica

    2016-01-01

    Theoretical part of this Master’s thesis is based on business process management governance. The term business process governance refers to a high-level model defining structures, metrics, roles and responsibilities for measuring, improvement and management of company key processes. Governance is one of key activity areas for increased business process maturity provided by maturity models. Establishing Center of Excellence for business process management is a governance key concept, which ena...

  18. Advanced morphological analysis of patterns of thin anodic porous alumina

    Energy Technology Data Exchange (ETDEWEB)

    Toccafondi, C. [Istituto Italiano di Tecnologia, Department of Nanophysics, Via Morego 30, Genova I 16163 (Italy); Istituto Italiano di Tecnologia, Department of Nanostructures, Via Morego 30, Genova I 16163 (Italy); Stępniowski, W.J. [Department of Advanced Materials and Technologies, Faculty of Advanced Technologies and Chemistry, Military University of Technology, 2 Kaliskiego Str., 00-908 Warszawa (Poland); Leoncini, M. [Istituto Italiano di Tecnologia, Department of Nanostructures, Via Morego 30, Genova I 16163 (Italy); Salerno, M., E-mail: marco.salerno@iit.it [Istituto Italiano di Tecnologia, Department of Nanophysics, Via Morego 30, Genova I 16163 (Italy)

    2014-08-15

    Different conditions of fabrication of thin anodic porous alumina on glass substrates have been explored, obtaining two sets of samples with varying pore density and porosity, respectively. The patterns of pores have been imaged by high resolution scanning electron microscopy and analyzed by innovative methods. The regularity ratio has been extracted from radial profiles of the fast Fourier transforms of the images. Additionally, the Minkowski measures have been calculated. It was first observed that the regularity ratio averaged across all directions is properly corrected by the coefficient previously determined in the literature. Furthermore, the angularly averaged regularity ratio for the thin porous alumina made during short single-step anodizations is lower than that of hexagonal patterns of pores as for thick porous alumina from aluminum electropolishing and two-step anodization. Therefore, the regularity ratio represents a reliable measure of pattern order. At the same time, the lower angular spread of the regularity ratio shows that disordered porous alumina is more isotropic. Within each set, when changing either pore density or porosity, both regularity and isotropy remain rather constant, showing consistent fabrication quality of the experimental patterns. Minor deviations are tentatively discussed with the aid of the Minkowski measures, and the slight decrease in both regularity and isotropy for the final data-points of the porosity set is ascribed to excess pore opening and consequent pore merging. - Highlights: • Thin porous alumina is partly self-ordered and pattern analysis is required. • Regularity ratio is often misused: we fix the averaging and consider its spread. • We also apply the mathematical tool of Minkowski measures, new in this field. • Regularity ratio shows pattern isotropy and Minkowski helps in assessment. • General agreement with perfect artificial patterns confirms the good manufacturing.

  19. Exploring Cu{sub 2}O/Cu cermet as a partially inert anode to produce aluminum in a sustainable way

    Energy Technology Data Exchange (ETDEWEB)

    Feng, Li-Chao [School of Mechanical Engineering, Huaihai Institute of Technology and Jiangsu Province R and D Institute of Marine Resources, Lianyungang 222005 (China); School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001 (China); Xie, Ning, E-mail: xiening@hit.edu.cn [School of Transportation Science and Engineering, Harbin Institute of Technology, Harbin 150090 (China); School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001 (China); Shao, Wen-Zhu, E-mail: wzshao@hit.edu.cn [School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001 (China); Zhen, Liang [School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001 (China); Ivanov, V.V. [Physical Chemistry Department, Siberian Federal University, Krasnoyarsk 660041 (Russian Federation)

    2014-10-15

    Highlights: • Cu{sub 2}O/Cu cermet was used as a candidate partially inert anode material to produce aluminum alloys. • The thermal corrosion behavior of Cu{sub 2}O/Cu was investigated in molten salt at 960 °C. • The corrosion rate is largely governed by the geometrical structures of Cu in the prepared samples. • The corrosion rate increases with decreasing sizes and increasing filling contents of Cu phase. • The corrosion rate was 1.8–9 cm/y and the Cu contents is less than 6.2 wt.% in the produced aluminum. - Abstract: As an energy-intensive process, aluminum production by the Hall–Héroult method accounts for significant emissions of CO{sub 2} and some toxic greenhouse gases. The utilization of an inert anode in place of a carbon anode was considered as a revolutionary technique to solve most of the current environmental problems resulting from the Hall–Héroult process. However, the critical property requirements of the inert anode materials significantly limit the application of this technology. In light of the higher demand for aluminum alloys than for pure aluminum, a partially inert anode was designed to produce aluminum alloys in a more sustainable way. Here, Cu{sub 2}O/Cu cermet was chosen as the material of interest. The thermal corrosion behavior of Cu{sub 2}O/Cu was investigated in Na{sub 3}AlF{sub 6}–CaF{sub 2}–Al{sub 2}O{sub 3} electrolyte at 960 °C to elucidate the corrosion mechanisms of this type of partially inert anode for the production of aluminum or aluminum alloys. Furthermore, the effects of the geometrical structure of the Cu phase on the thermal corrosion behavior of Cu{sub 2}O/Cu cermet in the electrolyte were investigated as well. The thermal corrosion rate was evaluated by the weight loss method and the results show that the samples prepared with branch-like Cu have higher thermal corrosion rate than those prepared with spherical Cu, and the corrosion rate increases with decreasing size and increasing filling

  20. Corporate Governance Country Assessment : Moldova

    OpenAIRE

    World Bank

    2004-01-01

    This report provides an assessment of Moldova's corporate governance framework-its legal and policy framework, as well as enforcement and compliance practices. The report makes policy recommendations where appropriate, and provides investors with a benchmark to compare corporate governance with the 1999 OECD Principles of Corporate Governance. Moldova is beginning to upgrade its legal and ...

  1. Corporate Governance Country Assessment : Azerbaijan

    OpenAIRE

    World Bank

    2009-01-01

    This report assesses Azerbaijan's corporate governance framework-its laws and regulations, enforcement and common business practices. The report notes recent improvements in corporate governance regulation, makes recommendations of policy and institutional strengthening, and provides a benchmark against which to measure corporate governance in Azerbaijan. Note that the report covers only p...

  2. The governance of hybrid organisations

    DEFF Research Database (Denmark)

    Spear, Roger; Cornforth, Chris

    2010-01-01

    The focus of this chapter is on the governance of third sector organizations (TSOs) and the challenges that are raised by hybridity. In particular it will focus on the question how does hybridity affect governance structures and processes and the challenges that governing bodies face?...

  3. Battery designs with high capacity anode materials and cathode materials

    Science.gov (United States)

    Masarapu, Charan; Anguchamy, Yogesh Kumar; Han, Yongbong; Deng, Haixia; Kumar, Sujeet; Lopez, Herman A.

    2017-10-03

    Improved high energy capacity designs for lithium ion batteries are described that take advantage of the properties of high specific capacity anode active compositions and high specific capacity cathode active compositions. In particular, specific electrode designs provide for achieving very high energy densities. Furthermore, the complex behavior of the active materials is used advantageously in a radical electrode balancing design that significantly reduced wasted electrode capacity in either electrode when cycling under realistic conditions of moderate to high discharge rates and/or over a reduced depth of discharge.

  4. ANODE CATALYST MATERIALS FOR USE IN FUEL CELLS

    DEFF Research Database (Denmark)

    2002-01-01

    Catalyst materials having a surface comprising a composition M¿x?/Pt¿3?/Sub; wherein M is selected from the group of elements Fe, Co, Rh and Ir; or wherein M represent two different elements selected from the group comprising Fe, CO, Rh, Ir, Ni, Pd, CU, Ag, Au and Sn; and wherein Sub represents a...... a substrate material selected from Ru and Os; the respective components being present within specific ranges, display improved properties for use inanodes for low-temperature fuel cell anodes for PENFC fuel cells and direct methanol fuel cells....

  5. Water and oil wettability of anodized 6016 aluminum alloy surface

    Science.gov (United States)

    Rodrigues, S. P.; Alves, C. F. Almeida; Cavaleiro, A.; Carvalho, S.

    2017-11-01

    This paper reports on the control of wettability behaviour of a 6000 series aluminum (Al) alloy surface (Al6016-T4), which is widely used in the automotive and aerospace industries. In order to induce the surface micro-nanostructuring of the surface, a combination of prior mechanical polishing steps followed by anodization process with different conditions was used. The surface polishing with sandpaper grit size 1000 promoted aligned grooves on the surface leading to static water contact angle (WCA) of 91° and oil (α-bromonaphthalene) contact angle (OCA) of 32°, indicating a slightly hydrophobic and oleophilic character. H2SO4 and H3PO4 acid electrolytes were used to grow aluminum oxide layers (Al2O3) by anodization, working at 15 V/18° C and 100 V/0 °C, respectively, in one or two-steps configuration. Overall, the anodization results showed that the structured Al surfaces were hydrophilic and oleophilic-like with both WCA and OCA below 90°. The one-step configuration led to a dimple-shaped Al alloy surface with small diameter of around 31 nm, in case of H2SO4, and with larger diameters of around 223 nm in case of H3PO4. The larger dimples achieved with H3PO4 electrolyte allowed to reach a slight hydrophobic surface. The thicker porous Al oxide layers, produced by anodization in two-step configuration, revealed that the liquids can penetrate easily inside the non-ordered porous structures and, thus, the surface wettability tended to superhydrophilic and superoleophilic character (CA < 10°). These results indicate that the capillary-pressure balance model, described for wettability mechanisms of porous structures, was broken. Moreover, thicker oxide layers with narrow pores of about 29 nm diameter allowed to achieve WCA < OCA. This inversion in favour of the hydrophilic-oleophobic surface behaviour is of great interest either for lubrication of mechanical components or in water-oil separation process.

  6. High capacity anode materials for lithium ion batteries

    Science.gov (United States)

    Lopez, Herman A.; Anguchamy, Yogesh Kumar; Deng, Haixia; Han, Yongbon; Masarapu, Charan; Venkatachalam, Subramanian; Kumar, Suject

    2015-11-19

    High capacity silicon based anode active materials are described for lithium ion batteries. These materials are shown to be effective in combination with high capacity lithium rich cathode active materials. Supplemental lithium is shown to improve the cycling performance and reduce irreversible capacity loss for at least certain silicon based active materials. In particular silicon based active materials can be formed in composites with electrically conductive coatings, such as pyrolytic carbon coatings or metal coatings, and composites can also be formed with other electrically conductive carbon components, such as carbon nanofibers and carbon nanoparticles. Additional alloys with silicon are explored.

  7. Advanced anodes for high-temperature fuel cells

    DEFF Research Database (Denmark)

    Atkinson, A.; Barnett, S.; Gorte, R.J.

    2004-01-01

    of these energy technologies; it is an all-ceramic device that operates at temperatures in the range 500-1,000degreesC. The SOFC offers certain advantages over lower temperature fuel cells, notably its ability to use carbon monoxide as a fuel rather than being poisoned by it, and the availability of high...... or anode. In terms of mitigating global warming, the ability of the SOFC to use commonly available fuels at high efficiency, promises an effective and early reduction in carbon dioxide emissions, and hence is one of the lead new technologies for improving the environment. Here, we discuss recent...

  8. Optimization of the strength of SOFC anode supports

    DEFF Research Database (Denmark)

    Frandsen, Henrik Lund; Ramos, Tania; Faes, A.

    2012-01-01

    During operation solid oxide fuel cells are stressed by temperature gradients and various internal and external mechanical loads, which must be withstood. This work deals with the optimization of the strength of as-sintered anode supported half-cells by imposing changes to production parameters......, such as powder milling and sintering temperature. The strength was measured with the ball-on-ring method, and analyzed with a large displacement finite element model. Weibull statistics were used to describe the distribution of strengths. The influence on the Weibull strength of the many different processing...

  9. Ni/YSZ Anode Interactions with Impurities in Coal Gas

    Energy Technology Data Exchange (ETDEWEB)

    Marina, Olga A.; Pederson, Larry R.; Coyle, Christopher A.; Thomsen, Edwin C.; Coffey, Greg W.

    2009-10-16

    Performance of solid oxide fuel cell (SOFC) with nickel/zirconia anodes on synthetic coal gas in the presence of low levels of phosphorus, arsenic, selenium, sulfur, hydrogen chloride, and antimony impurities were evaluated. The presence of phosphorus and arsenic led to the slow and irreversible SOFC degradation due to the formation of secondary phases with nickel, particularly close to the gas inlet. Phosphorus and antimony surface adsorption layers were identified as well. Hydrogen chloride and sulfur interactions with the nickel were limited to the surface adsorption only, whereas selenium exposure also led to the formation of nickel selenide for highly polarized cells.

  10. Use of Both Anode and Cathode Reactions in Wastewater Treatment

    Science.gov (United States)

    Brillas, Enric; Sirés, Ignasi; Cabot, Pere LluíS.

    Here, we describe the fundamentals, laboratory experiments, and environmental applications of indirect electrooxidation methods based on H2O2 electrogeneration such as electro-Fenton, photoelectro-Fenton and peroxicoagulation for the treatment of acidic wastewaters containing toxic and recalcitrant organics. These methods are electrochemical advanced oxidation processes that can be used in divided and undivided electrolytic cells in which pollutants are oxidized by hydroxyl radical (•OH) produced from anode and/or cathode reactions. H2O2 is generated from the two-electron reduction of O2 at reticulated vitreous carbon, graphite, carbon-felt, and O2-diffusion cathodes. The most usual method is electro-Fenton where Fe2 + added to the wastewater reacts with electrogenerated H2O2 to yield •OH and Fe3 + from Fenton's reaction. An advantage of this technique is that Fe2 + is continuously regenerated from cathodic reduction of Fe3 +. The characteristics of different electro-Fenton systems where pollutants are simultaneously destroyed by •OH formed in the medium from Fenton's reaction and at the anode surface from water oxidation are explained. The effect of the anode [Pt or boron-doped diamond (BDD)] and cathode (carbon-felt or O2-diffusion) on the degradation rate of persistent industrial by-products, herbicides, pharmaceuticals, dyes, etc. is examined. Initial pollutants react much more rapidly with •OH formed in the medium and their degradation sequences are discussed from aromatic intermediates and finally short aliphatic acids are detected. The synergetic positive catalytic effect of Cu2 + on the electro-Fenton process is evidenced. The photoelectro-Fenton method involves the irradiation of the wastewater with UVA light that rapidly photodecomposes complexes of Fe3 + with final carboxylic acids enhancing total decontamination. The peroxicoagulation method uses a sacrificial Fe anode that is continuously oxidized to Fe2 + and organics are either mineralized

  11. Design and Simulation of an Anode Stalk Support Insulator

    CERN Document Server

    Wang, Lisa; Westenskow, Glen

    2005-01-01

    An anode stalk support insulator in a magnetically insulated transmission line was designed and modeled. One of the important design criteria is that within space constraints, the electric field along the insulator surface has to be minimized in order to prevent a surface flashover. In order to further reduce the field on the insulator surface, metal rings between insulator layers were also specially shaped. To facilitate the design process, electric field simulations were performed to determine the maximum field stress on the insulator surfaces and the transmission line chamber.

  12. Forming gas treatment of lithium ion battery anode graphite powders

    Science.gov (United States)

    Contescu, Cristian Ion; Gallego, Nidia C; Howe, Jane Y; Meyer, III, Harry M; Payzant, Edward Andrew; Wood, III, David L; Yoon, Sang Young

    2014-09-16

    The invention provides a method of making a battery anode in which a quantity of graphite powder is provided. The temperature of the graphite powder is raised from a starting temperature to a first temperature between 1000 and 2000.degree. C. during a first heating period. The graphite powder is then cooled to a final temperature during a cool down period. The graphite powder is contacted with a forming gas during at least one of the first heating period and the cool down period. The forming gas includes H.sub.2 and an inert gas.

  13. Detailed characterization of anode-supported SOFCs by impedance spectroscopy

    DEFF Research Database (Denmark)

    Barfod, R.; Mogensen, Mogens Bjerg; Klemensø, Trine

    2007-01-01

    Anode-supported thin electrolyte cells are studied by electrochemical impedance spectroscopy (EIS). The aim is to describe how the losses of this type of cells are distributed at low current density (around open-circuit voltage) as a function of temperature. An equivalent circuit consisting...... to the electrode processes, and the assignments were verified by extensive full cell studies in which the partial pressure of reactant gases on both the electrodes as well as temperature was systematically varied with the aim to identify frequency regions which are dominated by an electrode specific process...

  14. Privatization Of Global Governance

    Directory of Open Access Journals (Sweden)

    T. J. Biersteker

    2017-01-01

    Full Text Available Thomas Biersteker graduated from Chicago University (BF in Political Science and MIT (MA in Political Science and got PhD in Political Science in MIT as well. Later professor Biersteker lectured in Yale University (1976-1985, South Carolina University (1985-1992 and Brown University (1992-2006. He could be described as a constructivist focusing his research on global governance, international organizations and transnational policy networks, construction of sovereignty and regimes of targeted sanctions. Professor Birsteker kindly agreed to give an interview to the “MGIMO Review of International Relations” during a seminar within the research project - Grant of RFBR No. 16-23-41004. The seminar was also attended by M.M. Lebedeva, Yu.A. Nikitin, A.I. Nikitin, I.A. Istomin.

  15. The government of life

    DEFF Research Database (Denmark)

    Villadsen, Kaspar; Wahlberg, Ayo

    2015-01-01

    . Subsequent research on biopolitics and governmentality has tended to separate the concepts, differentiating into distinct research traditions each with different intellectual pathways. We propose to bring these conceptual innovations together to understand contemporary problems of the government of life......The concepts of governmentality and biopolitics were contemporaneous and interlinked in Michel Foucault's initial analyses. These foregrounded how in the eighteenth century the population emerged as a ‘natural-cultural reality’ resulting from an integration of biological and economic knowledge......, that is, of managing, controlling and optimizing a living population. In this domain, the natural/biological continues to intersect with the social/cultural in novel and unexpected ways. Straddling the specter of biopolitics, we examine four dimensions of the concept: vital threats and the resurrection...

  16. Pension Fund governing board

    CERN Multimedia

    HR Department

    2008-01-01

    On 16 March and 7 May, the Pension Fund Governing Board (PFGB) held its fourth and fifth meetings The first of these meetings was primarily dedicated to the examination of the strategic asset allocation. The PFGB reaffirmed the main goal of the new strategic asset allocation: to improve the Pension Fund’s position with regard to risk by lowering overall portfolio volatility through suitable investments in less volatile asset classes such as real estate and absolute return strategies, where the return does not depend on market trends and negative growth is extremely unlikely. The finalised document will be presented to the Finance Committee and the Council at their June meetings for approval, in accordance with the provisions of the Levaux report. The PFGB also took note of the Internal Audit’s report on Pension Fund operations and decided to refer it to Working Group I as a working document for establishing a control and internal monitoring system for Pension Fund oper...

  17. Analysis of Anodes of Microbial Fuel Cells When Carbon Brushes Are Preheated at Different Temperatures

    Directory of Open Access Journals (Sweden)

    Qiao Yang

    2017-10-01

    Full Text Available The anode electrode is one of the most important components in all microbial electrochemical technologies (METs. Anode materials pretreatment and modification have been shown to be an effective method of improving anode performance. According to mass loss analysis during carbon fiber heating, five temperatures (300, 450, 500, 600, and 750 °C were selected as the pre-heating temperatures of carbon fiber brush anodes. Microbial fuel cell (MFC reactors built up with these pre-heated carbon brush anodes performed with different power densities and Coulombic efficiencies (CEs. Two kinds of measuring methods for power density were applied, and the numerical values of maximum power densities diverged greatly. Reactors with 450 °C anodes, using both methods, had the highest power densities, and the highest CEs were found using 500 °C anode reactors. The surface elements of heat-treated carbon fibers were analyzed using X-ray photoelectron spectra (XPS, and C, O, and N were the main constituents of the carbon fiber. There were four forms of N1s at the surface of the polyacrylonitrile (PAN-based carbon fiber, and their concentrations were different at different temperature samples. The microbial community of the anode surface was analyzed, and microbial species on anodes from every sample were similar. The differences in anode performance may be caused by mass loss and by the surface elements. For carbon brush anodes used in MFCs or other BESs, 450–500 °C preheating was the most suitable temperature range in terms of the power densities and CEs.

  18. Evolution of Anode Porosity under Air Oxidation: The Unveiling of the Active Pore Size

    Directory of Open Access Journals (Sweden)

    Francois Chevarin

    2017-03-01

    Full Text Available The carbon anode, used in aluminum electrolysis (Hall–Héroult process, is over-consumed by air oxidation and carboxy-reaction (with CO2. Several anode features may affect this over-consumption, such as impurity content, graphitization level and anode porosity features (e.g., porosity volume fraction or pore size distribution. The two first parameters are basically related to the quality of raw materials and coke calcination conditions. Anode porosity is, however, greatly affected by anode manufacturing conditions, and is possible to be modified, to some extent, by adjusting the anode recipe and the processing parameters. This work aims to investigate the effect of anode porosity on its air reactivity. Baked anode samples were prepared in laboratory scale and then crushed into powder form (−4760 + 4000 µm. The recipe for anode preparation was similar to a typical industrial recipe, except that in the lab scale no butt particles were used in the recipe. Anode particles were then gasified at six different conversion levels (0, 5, 15, 25, 35 and 50 wt % under air at 525 °C. The porosity was characterized in several pore size ranges, measured by nitrogen adsorption and mercury intrusion (0.0014–0.020, 0.002–0.025, 0.025–0.100, 0.1–40.0 and superior at 40 µm. The volume variation of each pore range, as a function of carbon conversion, was assessed and used to determine the size of the most active pores for air oxidation. The most active pore size was found to be the pores inferior at 40 µm before 15 wt % of gasification and pores superior at 40 µm between 15 and 50 wt % of carbon conversion. Limitation of pore size range could be used as an additional guideline, along with other targets such as high homogeneity and density, to set the optimum anode manufacturing parameters.

  19. Effect of Sintering Temperature and Applied Load on Anode-Supported Electrodes for SOFC Application

    Directory of Open Access Journals (Sweden)

    Xuan-Vien Nguyen

    2016-08-01

    Full Text Available Anode-supported cells are prepared by a sequence of hot pressing and co-sintering processes for solid oxide fuel cell (SOFC applications. Commercially available porous anode tape (NiO/YSZ = 50 wt %/50 wt %, anode tape (NiO/YSZ = 30 wt %/70 wt %, and YSZ are used as the anode substrate, anode functional layer, and electrolyte layer, respectively. After hot pressing, the stacked layers are then sintered at different temperatures (1250 °C, 1350 °C, 1400 °C and 1450 °C for 5 h in air. Different compressive loads are applied during the sintering process. An (La,SrMnO3 (LSM paste is coated on the post-sintered anode-supported electrolyte surface as the cathode, and sintered at different temperatures (1100 °C, 1150 °C, 1200 °C and 1250 °C for 2 h in air to generate anode-supported cells with dimensions of 60 × 60 mm2 (active reaction area of 50 × 50 mm2. SEM is used to investigate the anode structure of the anode-supported cells. In addition, confocal laser scanning microscopy is used to investigate the roughness of the cathode surfaces. At sintering temperatures of 1400 °C and 1450 °C, there is significant grain growth in the anode. Furthermore, the surface of the cathode is smoother at a firing temperature of 1200 °C. It is also found that the optimal compressive load of 1742 Pa led to a flatness of 168 µm/6 cm and a deformation of 0.72%. The open circuit voltage and power density of the anode-supported cell at 750 °C were 1.0 V and 178 mW·cm−2, respectively.

  20. Altering Anode Thickness To Improve Power Production in Microbial Fuel Cells with Different Electrode Distances

    KAUST Repository

    Ahn, Yongtae

    2013-01-17

    A better understanding of how anode and separator physical properties affect power production is needed to improve energy and power production by microbial fuel cells (MFCs). Oxygen crossover from the cathode can limit power production by bacteria on the anode when using closely spaced electrodes [separator electrode assembly (SEA)]. Thick graphite fiber brush anodes, as opposed to thin carbon cloth, and separators have previously been examined as methods to reduce the impact of oxygen crossover on power generation. We examined here whether the thickness of the anode could be an important factor in reducing the effect of oxygen crossover on power production, because bacteria deep in the electrode could better maintain anaerobic conditions. Carbon felt anodes with three different thicknesses were examined to see the effects of thicker anodes in two configurations: widely spaced electrodes and SEA. Power increased with anode thickness, with maximum power densities (604 mW/m 2, 0.32 cm; 764 mW/m2, 0.64 cm; and 1048 mW/m2, 1.27 cm), when widely spaced electrodes (4 cm) were used, where oxygen crossover does not affect power generation. Performance improved slightly using thicker anodes in the SEA configuration, but power was lower (maximum of 689 mW/m2) than with widely spaced electrodes, despite a reduction in ohmic resistance to 10 Ω (SEA) from 51-62 Ω (widely spaced electrodes). These results show that thicker anodes can work better than thinner anodes but only when the anodes are not adversely affected by proximity to the cathode. This suggests that reducing oxygen crossover and improving SEA MFC performance will require better separators. © 2012 American Chemical Society.

  1. Local Government System in Japan

    Directory of Open Access Journals (Sweden)

    Vladimir V. Redko

    2016-12-01

    Full Text Available The article is devoted to the issues of the activities of the local government of Japan. Particular attention is drawn to the legal framework and the material basis for the functioning of local self-government bodies. The system of local self-government is considered as a special form of self-government with a specific functional and meaning; system of municipal management and delegation of authority, as well as features of interaction between civil and imperious levels. The allocation of the city with a special status, as well as the financial structure of the local government of Japan, is considered in detail.

  2. Government-to-Government E-Government: A Case Study of a Federal Financial Program

    Science.gov (United States)

    Faokunla, Olumide Adegboyega

    2012-01-01

    The problem with the study of the concept of electronic government (e-Gov) is that scholars in the field have not adequately explored various dimensions of the concept. Literature on e-Gov is replete with works on the form of government to consumer e-Gov. Much less work had been done on the government to government (G2G) e-Gov. This qualitative…

  3. Effects of anodizing parameters and heat treatment on nanotopographical features, bioactivity, and cell culture response of additively manufactured porous titanium

    Energy Technology Data Exchange (ETDEWEB)

    Amin Yavari, S., E-mail: s.aminyavari@tudelft.nl [Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology (TU Delft), Mekelweg 2, 2628 CD Delft (Netherlands); Chai, Y.C. [Prometheus, Division of Skeletal Tissue Engineering, Bus 813, O& N1, Herestraat 49, KU Leuven, 3000 Leuven (Belgium); Tissue Engineering Laboratory, Skeletal Biology and Engineering Research Center, Bus 813, O& N1, Herestraat 49, KU Leuven, 3000 Leuven (Belgium); Department of Biomedical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur (Malaysia); Böttger, A.J. [Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology (TU Delft), Mekelweg 2, 2628 CD Delft (Netherlands); Wauthle, R. [KU Leuven, Department of Mechanical Engineering, Section Production Engineering, Machine Design and Automation (PMA), Celestijnenlaan 300B, 3001 Leuven (Belgium); 3D Systems — LayerWise NV, Grauwmeer 14, 3001 Leuven (Belgium); Schrooten, J. [Department of Metallurgy and Materials Engineering, KU Leuven, Kasteelpark Arenberg 44 — PB2450, B-3001 Heverlee (Belgium); Weinans, H. [Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology (TU Delft), Mekelweg 2, 2628 CD Delft (Netherlands); Department of Orthopedics and Dept. Rheumatology, UMC Utrecht, Heidelberglaan100, 3584CX Utrecht (Netherlands); Zadpoor, A.A. [Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology (TU Delft), Mekelweg 2, 2628 CD Delft (Netherlands)

    2015-06-01

    Anodizing could be used for bio-functionalization of the surfaces of titanium alloys. In this study, we use anodizing for creating nanotubes on the surface of porous titanium alloy bone substitutes manufactured using selective laser melting. Different sets of anodizing parameters (voltage: 10 or 20 V anodizing time: 30 min to 3 h) are used for anodizing porous titanium structures that were later heat treated at 500 °C. The nanotopographical features are examined using electron microscopy while the bioactivity of anodized surfaces is measured using immersion tests in the simulated body fluid (SBF). Moreover, the effects of anodizing and heat treatment on the performance of one representative anodized porous titanium structures are evaluated using in vitro cell culture assays using human periosteum-derived cells (hPDCs). It has been shown that while anodizing with different anodizing parameters results in very different nanotopographical features, i.e. nanotubes in the range of 20 to 55 nm, anodized surfaces have limited apatite-forming ability regardless of the applied anodizing parameters. The results of in vitro cell culture show that both anodizing, and thus generation of regular nanotopographical feature, and heat treatment improve the cell culture response of porous titanium. In particular, cell proliferation measured using metabolic activity and DNA content was improved for anodized and heat treated as well as for anodized but not heat-treated specimens. Heat treatment additionally improved the cell attachment of porous titanium surfaces and upregulated expression of osteogenic markers. Anodized but not heat-treated specimens showed some limited signs of upregulated expression of osteogenic markers. In conclusion, while varying the anodizing parameters creates different nanotube structure, it does not improve apatite-forming ability of porous titanium. However, both anodizing and heat treatment at 500 °C improve the cell culture response of porous titanium

  4. Local Government Internal Audit Compliance

    Directory of Open Access Journals (Sweden)

    Greg Jones

    2015-09-01

    Full Text Available Local government councils (LGC rely on a number of funding sources including state and federal governments as well as their community constituents to enable them to provide a range of public services. Given the constraints on these funding sources councils need to have in place a range of strategies and policies capable of providing good governance and must appropriately discharge their financial accountabilities. To assist LGC with meeting their governance and accountability obligations they often seek guidance from their key stakeholders. For example, in the Australian State of New South Wales (NSW, the Office of Local Government has developed a set of guidelines, the Internal Audit Guidelines. In 2010 the NSW Office of Local Government issued revised guidelines emphasising that an internal audit committee is an essential component of good governance. In addition, the guidelines explained that to improve the governance and accountability of the councils, these committees should be composed of a majority of independent members. To maintain committee independence the guidelines indicated that the Mayor should not be a member of the committee. However these are only guidelines, not legislated requirements and as such compliance with the guidelines, before they were revised, has been demonstrated to be quite low (Jones & Bowrey 2013. This study, based on a review of NSW Local Government Councils’ 2012/2013 reports, including Annual Reportsrelation to internal audit committees, to determine if the guidelines are effective in improving local government council governance.

  5. Petra Governance Handbook - WP7 – Governance structures & business models : D7.3: Governance Handbook

    NARCIS (Netherlands)

    Veeneman, W.; Hirschhorn, F.; Klievink, A.J.; Steenhuisen, B.M.; van der Voort, H.G.

    2017-01-01

    This document represents the governance handbook on mobility data platforms for the PETRA project. The governance handbook provides metropolitan authorities contemplating the implementation of a mobility data platform in line with the PETRA project about governance issues and design.
    The

  6. Managing stakeholders in transformational government

    DEFF Research Database (Denmark)

    Reinwald, Anja Kaldahl; Kræmmergaard, Pernille

    2012-01-01

    ). This paper contributes to this literature by reporting the findings from a case study in a Danish local government who has reached the stage of transformational government. Using a grounded theory approach, information about the local government was initially collected and further analyzed within...... a stakeholder perspective. The paper reports how they succeeded in involving the most important stakeholders in the process of reaching transformational government. Finally the paper offers six lessons learned, based on the case study, about how to manage the involved stakeholders to reach transformational......According to the e-government maturity literature public organizations will move through different stages of maturity implying that more mature e-government is better. For many public organizations the next stage to enter is the stage of transformational government (Dhillon et al., 2008...

  7. Governing the Nexus for Sustainability

    Directory of Open Access Journals (Sweden)

    Marx Sina

    2015-01-01

    Full Text Available This report summarizes the challenges of and requirements for effective governance of the water, energy and food nexus. With global dynamics such as climate change, urbanization and changing consumption patterns, governing resources in a coherent manner becomes both more complex and more relevant for sustainable development. Governance challenges include nexus economics (costs and benefits of different approaches to resource management, institutional design (like questions of how decision-making should be best distributed and good governance (how to make sure that nexus governance adheres to certain agreed upon principles and values. In terms of economics, a balance between sector specific actions and nexus governance is required. For effective decision-making it is important that power among different institutions is both distributed and coordinated. Good nexus governance requires targets that can be monitored to make sure that basic principles are followed and to examine whether progress toward sustainable development is being made.

  8. Anodic Fabrication of Ti-Nb-Zr-O Nanotube Arrays

    Directory of Open Access Journals (Sweden)

    Qiang Liu

    2014-01-01

    Full Text Available Highly ordered Ti-Nb-Zr-O nanotube arrays were fabricated through pulse anodic oxidation of Ti-Nb-Zr alloy in 1 M NaH2PO4 containing 0.5 wt% HF electrolytes. The effect of anodization parameters and Zr content on the microstructure and composition of Ti-Nb-Zr-O nanotubes was investigated using a scanning electron microscope equipped with energy dispersive X-ray analysis. It was found that length of the Ti-Nb-Zr-O nanotubes increased with increase of Zr contents. The diameter and the length of Ti-Nb-Zr-O nanotubes could be controlled by pulse voltage. XRD analysis of Ti-Nb-Zr-O samples annealed at 500°C in air indicated that the (101 diffraction peaks shifted from 25.78° to 25.05° for annealed Ti-Nb-Zr-O samples with different Zr contents because of larger lattice parameter of Ti-Nb-Zr-O compared to that of undoped TiO2.

  9. Novel anode catalyst for direct methanol fuel cells.

    Science.gov (United States)

    Basri, S; Kamarudin, S K; Daud, W R W; Yaakob, Z; Kadhum, A A H

    2014-01-01

    PtRu catalyst is a promising anodic catalyst for direct methanol fuel cells (DMFCs) but the slow reaction kinetics reduce the performance of DMFCs. Therefore, this study attempts to improve the performance of PtRu catalysts by adding nickel (Ni) and iron (Fe). Multiwalled carbon nanotubes (MWCNTs) are used to increase the active area of the catalyst and to improve the catalyst performance. Electrochemical analysis techniques, such as energy dispersive X-ray spectrometry (EDX), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and X-ray photoelectron spectroscopy (XPS), are used to characterize the kinetic parameters of the hybrid catalyst. Cyclic voltammetry (CV) is used to investigate the effects of adding Fe and Ni to the catalyst on the reaction kinetics. Additionally, chronoamperometry (CA) tests were conducted to study the long-term performance of the catalyst for catalyzing the methanol oxidation reaction (MOR). The binding energies of the reactants and products are compared to determine the kinetics and potential surface energy for methanol oxidation. The FESEM analysis results indicate that well-dispersed nanoscale (2-5 nm) PtRu particles are formed on the MWCNTs. Finally, PtRuFeNi/MWCNT improves the reaction kinetics of anode catalysts for DMFCs and obtains a mass current of 31 A g(-1) catalyst.

  10. Novel Anode Catalyst for Direct Methanol Fuel Cells

    Directory of Open Access Journals (Sweden)

    S. Basri

    2014-01-01

    Full Text Available PtRu catalyst is a promising anodic catalyst for direct methanol fuel cells (DMFCs but the slow reaction kinetics reduce the performance of DMFCs. Therefore, this study attempts to improve the performance of PtRu catalysts by adding nickel (Ni and iron (Fe. Multiwalled carbon nanotubes (MWCNTs are used to increase the active area of the catalyst and to improve the catalyst performance. Electrochemical analysis techniques, such as energy dispersive X-ray spectrometry (EDX, X-ray diffraction (XRD, field emission scanning electron microscopy (FESEM, and X-ray photoelectron spectroscopy (XPS, are used to characterize the kinetic parameters of the hybrid catalyst. Cyclic voltammetry (CV is used to investigate the effects of adding Fe and Ni to the catalyst on the reaction kinetics. Additionally, chronoamperometry (CA tests were conducted to study the long-term performance of the catalyst for catalyzing the methanol oxidation reaction (MOR. The binding energies of the reactants and products are compared to determine the kinetics and potential surface energy for methanol oxidation. The FESEM analysis results indicate that well-dispersed nanoscale (2–5 nm PtRu particles are formed on the MWCNTs. Finally, PtRuFeNi/MWCNT improves the reaction kinetics of anode catalysts for DMFCs and obtains a mass current of 31 A g−1 catalyst.

  11. Multi-Anode Photomultplier (MAPMT) readout for High Granularity Calorimeters

    CERN Document Server

    Mkrtchyan, Tigran; The ATLAS collaboration

    2017-01-01

    Hadron calorimeter high performance in jet sub-structure measurements can be achieved for objects with $p_{T}$ greater than 1 TeV if the readout geometry is finely segmented in $\\Delta\\eta \\times \\Delta\\phi$. A feasibility study to increase the readout granularity of TileCal, the central hadron calorimeter of the ATLAS detector, is presented. We show a preliminary study exploring the possibility to increase by a factor 4 the present readout granularity of the inner layer cells of TileCal (0.1->0.025 in $\\Delta\\eta$) and to split into two layers the intermediate section of TileCal. The proposed solution is designed to cope with mechanical and readout bandwidth and power constraints. Assuming that the mechanics of the Tile modules cannot be changed, Multi-Anode PMTs with same boundary geometry of the present single-anode PMTs are considered to readout WLS bers, ideally one per pixel, carrying the signals from the individual scintillating tiles of each detector cells. The discussed challenges of the design are: ...

  12. Protection of Lithium (Li) Anodes Using Dual Phase Electrolytes

    Energy Technology Data Exchange (ETDEWEB)

    Mikhaylik, Yuriy [Sion Power Corporation, Tucson, AZ (United States)

    2014-09-30

    Sion Power focused on metallic lithium anode protection, employing the Dual-Phase Electrolyte approach. The objective of this project was to develop a unique electrolyte providing two liquid phases having good Li+ conductivity, self-partitioning and immiscibility, serving separately the cathode and anode electrodes. This Dual-Phase Electrolyte was combined with thin film multi-layer, physical barrier membranes developed partially under a separate ARPA-E funded project. All these protective structures were stabilized by externally applied pressure. This strategy was used for Li-S cells. The development directly addressed cell safety, particularly higher thermal stability, while also allowing higher energies and cycle life. Safety tests showed that 100% of cells with Dual-Phase Electrolyte were intact and did not exhibit thermal runaway up to 178 °C and thus met the project objective of increasing the runaway temperature to >165°C. Cells also passed cycling at USABC Dynamic Stress Test conditions developed for Electric Vehicle applications and generated specific energy > 300 Wh/kg.

  13. Single-Wall Carbon Nanotube Anodes for Lithium Cells

    Science.gov (United States)

    Hepp, Aloysius F.; Raffaelle, Ryne; Gennett, Tom; Kumta, Prashant; Maranchi, Jeff; Heben, Mike

    2006-01-01

    In recent experiments, highly purified batches of single-wall carbon nanotubes (SWCNTs) have shown promise as superior alternatives to the graphitic carbon-black anode materials heretofore used in rechargeable thin-film lithium power cells. The basic idea underlying the experiments is that relative to a given mass of graphitic carbon-black anode material, an equal mass of SWCNTs can be expected to have greater lithium-storage and charge/discharge capacities. The reason for this expectation is that whereas the microstructure and nanostructure of a graphitic carbon black is such as to make most of the interior of the material inaccessible for intercalation of lithium, a batch of SWCNTs can be made to have a much more open microstructure and nanostructure, such that most of the interior of the material is accessible for intercalation of lithium. Moreover, the greater accessibility of SWCNT structures can be expected to translate to greater mobilities for ion-exchange processes and, hence, an ability to sustain greater charge and discharge current densities.

  14. Pulsed klystrons with feedback controlled mod-anode modulators

    Energy Technology Data Exchange (ETDEWEB)

    Reass, William A [Los Alamos National Laboratory; Baca, David M [Los Alamos National Laboratory; Jerry, Davis L [Los Alamos National Laboratory; Rees, Daniel E [Los Alamos National Laboratory

    2009-01-01

    This paper describes a fast rise and fall, totem-pole mod-anode modulators for klystron application. Details of these systems as recently installed utilizing a beam switch tube ''on-deck'' and a planar triode ''off-deck'' in a grid-catch feedback regulated configuration will be provided. The grid-catch configuration regulates the klystron mod-anode voltage at a specified set-point during switching as well as providing a control mechanism that flat-top regulates the klystron beam current during the pulse. This flat-topped klystron beam current is maintained while the capacitor bank droops. In addition, we will review more modern on-deck designs using a high gain, high voltage planar triode as a regulating and switching element. These designs are being developed, tested, and implemented for the Los Alamos Neutron Science Center (LANSCE) accelerator refurbishment project, ''LANSCE-R''. An advantage of the planar triode is that the tube can be directly operated with solid state linear components and provides for a very compact design. The tubes are inexpensive compared to stacked semiconductor switching assemblies and also provide a linear control capability. Details of these designs are provided as well as operational and developmental results.

  15. Graphene composites as anode materials in lithium-ion batteries

    Science.gov (United States)

    Mazar Atabaki, M.; Kovacevic, R.

    2013-03-01

    Since the world of mobile phones and laptops has significantly altered by a big designer named Steve Jobs, the electronic industries have strived to prepare smaller, thinner and lower weight products. The giant electronic companies, therefore, compete in developing more efficient hardware such as batteries used inside the small metallic or polymeric frame. One of the most important materials in the production lines is the lithium-based batteries which is so famous for its ability in recharging as many times as a user needs. However, this is not an indication of being long lasted, as many of the electronic devices are frequently being used for a long time. The performance, chemistry, safety and above all cost of the lithium ion batteries should be considered when the design of the compounds are at the top concern of the engineers. To increase the efficiency of the batteries a combination of graphene and nanoparticles is recently introduced and it has shown to have enormous technological effect in enhancing the durability of the batteries. However, due to very high electronic conductivity, these materials can be thought of as preparing the anode electrode in the lithiumion battery. In this paper, the various approaches to characterize different types of graphene/nanoparticles and the process of preparing the anode for the lithium-ion batteries as well as their electrical properties are discussed.

  16. Realisation of an anode supported planar SOFC system

    Energy Technology Data Exchange (ETDEWEB)

    Buchkremer, H.P.; Stoever, D. [Institut fuer Werkstoffe der Energietechnik, Juelich (Germany); Diekmann, U. [Zentralabteilung Technologie, Juelich (Germany)] [and others

    1996-12-31

    Lowering the operating temperature of S0FCs to below 800{degrees}C potentially lowers production costs of a SOFC system because of a less expensive periphery and is able to guarantee sufficient life time of the stack. One way of achieving lower operating temperatures is the development of new high conductive electrolyte materials. The other way, still based on state-of-the-art material, i.e. yttria-stabilized zirconia (YSZ) electrolyte, is the development of a thin film electrolyte concept. In the Forschungszentrum Julich a program was started to produce a supported planar SOFC with an YSZ electrolyte thickness between 10 to 20 put. One of the electrodes, i.e. the anode, was used as support, in order not to increase the number of components in the SOFC. The high electronic conductivity of the anode-cermet allows the use of relatively thick layers without increasing the cell resistance. An additional advantage of the supported planar concept is the possibility to produce single cells larger than 10 x 10 cm x cm, that is with an effective electrode cross area of several hundred cm{sup 2}.

  17. Fortissimo: A Japanese Space Test Of Bare Wire Anode Tethers

    Science.gov (United States)

    Johnson, Les; Fujii, H. A.; Sanmartin, J. R.

    2008-01-01

    A Japanese led international team is developing a suborbital test of orbital-motion-limited (OML) bare wire anode current collection for application to electrodynamic tether (EDT) propulsion. The tether is a tape with a width of 25 mm, thickness of 0.05 mm, and is 300 m in length. This will be the first space test of OML theory. The mission will launch in the summer of 2009 using an S520 Sounding Rocket. During ascent, and above approx. 100 km in attitude, the tape tether will be deployed at a rate of approx. 8 m/s. Once deployed, the tape tether will serve as an anode, collecting ionospheric electrons. The electrons will be expelled into space by a hollow cathode device, thereby completing the circuit and allowing current to flow. The total amount of current collected will be used to assess the validity of OML theory. This paper will describe the objectives of the proposed mission, the technologies to be employed, and the application of the results to future space missions using EDTs for propulsion or power generation.

  18. High resolution decoding of Multi-Anode Microchannel Array detectors

    Science.gov (United States)

    Kasle, David B.; Morgan, Jeffrey S.

    1991-01-01

    The Multi-Anode Microchannel Array (MAMA) is a photon counting detector which utilizes a photocathode for photon to electron conversion, a microchannel plate (MCP) for signal amplification and a proximity focused anode array for position sensitivity. The detector electronics decode the position of an event through coincidence discrimination. The decoding algorithm which associates a given event with the appropriate pixel is determined by the geometry of the array. A new algorithm incorporated into a CMOS Application Specific Integrated Circuit (ASIC) decoder which improves the pixel spatial resolution is described. The new algorithm does not degrade the detector throughput and does not require any modifications to the detector tube. The standard MAMA detector has a pixel size of 25 x 25 square microns, but with the new decoder circuit the pixel size is reduced to 12.5 x 12.5 square microns. We have built the first set of decode electronics utilizing the new ASIC chips and report here on the first imaging tests of this system.

  19. Acid blue 29 decolorization and mineralization by anodic oxidation with a cold gas spray synthesized Sn-Cu-Sb alloy anode.

    Science.gov (United States)

    do Vale-Júnior, Edilson; Dosta, Sergi; Cano, Irene Garcia; Guilemany, Josep Maria; Garcia-Segura, Sergi; Martínez-Huitle, Carlos Alberto

    2016-04-01

    The elevated cost of anodic materials used in the anodic oxidation for water treatment of effluents undermines the real application of these technologies. The study of novel alternative materials more affordable is required. In this work, we report the application of Sn-Cu-Sb alloys as cheap anodic material to decolorize azo dye Acid Blue 29 solutions. These anodes have been synthesized by cold gas spray technologies. Almost complete decolorization and COD abatement were attained after 300 and 600 min of electrochemical treatment, respectively. The influence of several variables such as supporting electrolyte, pH, current density and initial pollutant concentration has been investigated. Furthermore, the release and evolution of by-products was followed by HPLC to better understand the oxidative power of Sn-Cu-Sb electrodes. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Nickel/Yttria-stabilised zirconia cermet anodes for solid oxide fuel cells

    NARCIS (Netherlands)

    Primdahl, Søren

    1999-01-01

    This thesis deals with the porous Ni/yttria-stabilized zirconia (YSZ) cermet anode on a YSZ electrolyte for solid oxide fuel cells (SOFC). Such anodes are predominantly operated in moist hydrogen at 700°C to 1000°C, and the most important technological parameters are the polarization resistance and

  1. Infiltration of commercially available, anode supported SOFC’s via inkjet printing

    NARCIS (Netherlands)

    Mitchell-Williams, T.B.; Tomov, R.I.; Saadabadi, S.A.; Krauz, M.; Purushothaman Vellayani, A.; Glowacki, B.A.; Kumar, R.V.

    2017-01-01

    Commercially available anode supported solid oxide fuel cells (NiO-8YSZ/8YSZ/LSCF- 20 mm in diameter) were anode infiltrated with gadolinium doped ceria (CGO) using a scalable drop-on-demand inkjet printing process. Cells were infiltrated with two different precursor solutions—water based or

  2. Neural substrate for brain stimulation reward in the rat: cathodal and anodal strength-duration properties.

    Science.gov (United States)

    Matthews, G

    1977-08-01

    The trade-off between current strength and duration of a stimulating pulse was studied for the rewarding and priming effects of brain stimulation reward (BSR). With cathodal pulses, strenght-duration functions for BSR had chronaxies of .8-3 msec. No differences were observed between the results for rewarding and priming effects. With anodal pulses. strength-duration curves were parallel to the cathodal curves at pulse durations of .1-5 msec, but at pulse durations greater than 5 msec the anodal curves showed a greater drop in required current intensity than did the cathodal curves. The parallel portion of the anodal curves was interpreted as due to anode-make excitation, and the drop at longer pulse durations was interpreted as due to anode-break excitation. Cathodal strength-duration functions for the motor effect elicited through the BSR electrodes had chronaxies of .15-.48 msec. Measurements of the latency of the muscle twitch confirmed that anode-make and anode-break excitation occurred, the latter becoming evident at pulse durations as brief as .3-.4 msec. The results provide quantitative characterization of cathodal and anodal strength-duration properties of the neural substrate for BSR and are discussed in terms of their value in guiding electrophysiological investigation of that substrate.

  3. Characterization of proton exchange membrane fuel cell anode catalysts prepared by colloid method

    Energy Technology Data Exchange (ETDEWEB)

    Franco, E.G.; Dantas-Filho, P.L.; Burani, G.F. [Universidade de Sao Paulo (IEE/USP), Sao Paulo, SP (Brazil). Instituto de Eletrotecnica e Energia

    2009-07-01

    Full text: Anode catalysts for Proton Exchange Membrane Fuel Cell (PEMFC) were synthesized by the colloid method and their structure was investigated by transmission electron microscopy (TEM), energy dispersive analyses (EDS), X-ray Diffraction (XRD). The electrochemical behavior of the anode catalyst was analyzed by cyclic voltammetry (CV) and polarization curves (UxI). (author)

  4. Throwing power of the zinc-hydrogel anode for sacrifical protection of steel in concrete

    NARCIS (Netherlands)

    Peelen, W.H.A.; Polder, R.B.

    2002-01-01

    The throwing power of the Zinc-Hydrogel Anode for sacrificial protection of steel in concrete was studied in the laboratory under controlled environments. The anode to steel ratio in the specimens was 1. The corrosion state of the rebar is moderate. The results indicate that for a concrete

  5. Advanced gas-emission anode design for microfluidic fuel cell eliminating bubble accumulation

    Science.gov (United States)

    Zhang, Hao; Xuan, Jin; Leung, Dennis Y. C.; Wang, Huizhi; Xu, Hong; Zhang, Li

    2017-10-01

    A microfluidic fuel cell is a low cost, easily fabricated energy device and is considered a promising energy supplier for portable electronics. However, the currently developed microfluidic fuel cells that are fed with hydrocarbon fuels are confronted with a bubble problem especially when operating at high current density conditions. In this work, a gas-emission anode is presented to eliminate the gas accumulation at the anode. This gas-emission anode is verified as a valid design for discharging gaseous products, which is especially beneficial for stable operation of microfluidic fuel cells. The electrochemical performance of a counter-flow microfluidic fuel cell equipped with a gas-emission anode was measured. The results indicate that the specific design of the gas-emission anode is essential for reducing the oxygen reduction reaction parasitic effect at the anode. Fuel utilization of 76.4% was achieved at a flow rate of 0.35 µl min‑1. Current–voltage curves of single electrodes were measured and the parasitic effect at the anode was identified as the main performance limiting factor in the presented anode design.

  6. [Temperature storage ability and radiation ability of rotating anodes in high-performance roentgen tubes].

    Science.gov (United States)

    Schreiber, P

    1983-09-01

    In long time or serial operation metal anode discs with blackened layer can be loaded much higher than graphite anode discs, because the distance between thermal source and temperature sensitive spot in metal discs is larger than in graphite discs and the maximum permissible temperature for metal discs is much higher than that for graphite discs.

  7. Experimental study of soft X-ray intensity with different anode tips in ...

    Indian Academy of Sciences (India)

    2016-06-15

    Jun 15, 2016 ... in figure 1, due to the Lorentz force, while the cur- rent sheath reaches the anode's end, it slips off ... is observed in both the plasma column and in the anode region, where the electron beams collide with .... rapid changes in the motion of the plasma current sheath from the axial acceleration phase to the ...

  8. FIB-SEM investigation of trapped intermetallic particles in anodic oxide films on AA1050 aluminium

    DEFF Research Database (Denmark)

    Jariyaboon, Manthana; Møller, Per; Dunin-Borkowski, Rafal E.

    2011-01-01

    Purpose - The purpose of this investigation is to understand the structure of trapped intermetallics particles and localized composition changes in the anodized anodic oxide film on AA1050 aluminium substrates. Design/methodology/approach - The morphology and composition of Fe-containing intermet...

  9. High Volumetric Capacity Three-Dimensionally Sphere-Caged Secondary Battery Anodes.

    Science.gov (United States)

    Liu, Jinyun; Chen, Xi; Kim, Jinwoo; Zheng, Qiye; Ning, Hailong; Sun, Pengcheng; Huang, Xingjiu; Liu, Jinhuai; Niu, Junjie; Braun, Paul V

    2016-07-13

    High volumetric energy density secondary batteries are important for many applications, which has led to considerable efforts to replace the low volumetric capacity graphite-based anode common to most Li-ion batteries with a higher energy density anode. Because most high capacity anode materials expand significantly during charging, such anodes must contain sufficient porosity in the discharged state to enable the expansion, yet not excess porosity, which lowers the overall energy density. Here, we present a high volumetric capacity anode consisting of a three-dimensional (3D) nanocomposite formed in only a few steps which includes both a 3D structured Sn scaffold and a hollow Sn sphere within each cavity where all the free Sn surfaces are coated with carbon. The anode exhibits a high volumetric capacity of ∼1700 mA h cm(-3) over 200 cycles at 0.5C, and a capacity greater than 1200 mA h cm(-3) at 10C. Importantly, the anode can even be formed into a commercially relevant ∼100 μm thick form. When assembled into a full cell the anode shows a good compatibility with a commercial LiMn2O4 cathode. In situ TEM observations confirm the electrode design accommodates the necessary volume expansion during lithiation.

  10. Diagnostic Setup for Characterization of Near-Anode Processes in Hall Thrusters

    Energy Technology Data Exchange (ETDEWEB)

    L. Dorf; Y. Raitses; N.J. Fisch

    2003-09-08

    A diagnostic setup for characterization of near-anode processes in Hall-current plasma thrusters consisting of biased and emissive electrostatic probes, high-precision positioning system and low-noise electronic circuitry was developed and tested. Experimental results show that radial probe insertion does not cause perturbations to the discharge and therefore can be used for accurate near-anode measurements.

  11. In-situ electrochemical doping of nanoporous anodic aluminum oxide with indigo carmine organic dye

    Energy Technology Data Exchange (ETDEWEB)

    Stępniowski, Wojciech J., E-mail: wojciech.stepniowski@wat.edu.pl [Department of Advanced Materials and Technology, Faculty of Advanced Technology and Chemistry, Military University of Technology, 2 Kaliskiego Str., 00-908 Warszawa (Poland); Norek, Małgorzata [Department of Advanced Materials and Technology, Faculty of Advanced Technology and Chemistry, Military University of Technology, 2 Kaliskiego Str., 00-908 Warszawa (Poland); Budner, Bogusław [Institute of Optoelectronics, Military University of Technology, 2 Kaliskiego Str., 00-908 Warszawa (Poland); Michalska-Domańska, Marta [Department of Advanced Materials and Technology, Faculty of Advanced Technology and Chemistry, Military University of Technology, 2 Kaliskiego Str., 00-908 Warszawa (Poland); Institute of Optoelectronics, Military University of Technology, 2 Kaliskiego Str., 00-908 Warszawa (Poland); Nowak-Stępniowska, Agata; Bombalska, Aneta; Kaliszewski, Miron [Institute of Optoelectronics, Military University of Technology, 2 Kaliskiego Str., 00-908 Warszawa (Poland); Mostek, Anna [Department of Advanced Materials and Technology, Faculty of Advanced Technology and Chemistry, Military University of Technology, 2 Kaliskiego Str., 00-908 Warszawa (Poland); Thorat, Sanjay; Salerno, Marco [Department of Nanophysics, Istituto Italiano di Tecnologia, via Morego 30, Genova I-16163 (Italy); Giersig, Michael [Institut für Experimentalphysik, Freie Universität Berlin, Arnimallee 14, 14195 Berlin (Germany); Bojar, Zbigniew [Department of Advanced Materials and Technology, Faculty of Advanced Technology and Chemistry, Military University of Technology, 2 Kaliskiego Str., 00-908 Warszawa (Poland)

    2016-01-01

    Nanoporous anodic aluminum oxide was formed in sulfuric acid with addition of indigo carmine. During anodizing, the organic dye was incorporated into the porous oxide walls. X-ray photoelectron spectroscopy revealed the presence of nitrogen and sulfur in the anodic aluminum oxide. Two types of incorporated sulfur were found: belonging to the sulfate anions SO{sub 4}{sup 2−} of the electrolyte and belonging to the C-SO{sub 3}{sup −} side groups of the indigo carmine. Raman spectroscopy confirmed the incorporation and showed that the inorganic–organic hybrid material inherited optical properties from the indigo carmine. Typical modes from pyrrolidone rings, unique for indigo carmine in the investigated system (650 and 1585 cm{sup −1}), were found to be the strongest for the greatest anodizing voltages used. Despite the indigo carmine incorporation, the morphology of the oxide is still nanoporous and its geometry is still tuned by the voltage applied during aluminum anodization. This work presents an inexpensive and facile approach to doping an inorganic oxide material with organic compounds. - Highlights: • Nanoporous anodic alumina was formed in electrolyte with indigo carmine. • XPS confirmed the presence of N and S in anodic alumina. • Raman spectroscopy revealed indigo carmine bands in anodic alumina. • The higher the voltage, the more indigo carmine was incorporated.

  12. The Roles of Biofilm Conductivity and Donor Substrate Kinetics in a Mixed-Culture Biofilm Anod

    Science.gov (United States)

    We experimentally assessed kinetics and thermodynamics of electron transfer (ET) from the donor substrate (acetate) to the anode for a mixed-culture biofilm anode. We interpreted the results with a modified biofilm-conduction model consisting of three ET steps: (1) intracellular...

  13. High Biofilm Conductivity Maintained Despite Anode Potential Changes in a Geobacter-Enriched Biofilm

    Science.gov (United States)

    This study systematically assessed intracellular electron transfer (IET) and extracellular electron transfer (EET) kinetics with respect to anode potential (Eanode) in a mixed-culture biofilm anode enriched with Geobacter spp. High biofilm conductivity (0.96–1.24 mScm^-1) was mai...

  14. Circuit for high resolution decoding of multi-anode microchannel array detectors

    Science.gov (United States)

    Kasle, David B. (Inventor)

    1995-01-01

    A circuit for high resolution decoding of multi-anode microchannel array detectors consisting of input registers accepting transient inputs from the anode array; anode encoding logic circuits connected to the input registers; midpoint pipeline registers connected to the anode encoding logic circuits; and pixel decoding logic circuits connected to the midpoint pipeline registers is described. A high resolution algorithm circuit operates in parallel with the pixel decoding logic circuit and computes a high resolution least significant bit to enhance the multianode microchannel array detector's spatial resolution by halving the pixel size and doubling the number of pixels in each axis of the anode array. A multiplexer is connected to the pixel decoding logic circuit and allows a user selectable pixel address output according to the actual multi-anode microchannel array detector anode array size. An output register concatenates the high resolution least significant bit onto the standard ten bit pixel address location to provide an eleven bit pixel address, and also stores the full eleven bit pixel address. A timing and control state machine is connected to the input registers, the anode encoding logic circuits, and the output register for managing the overall operation of the circuit.

  15. Atomic Layer Deposition of SnO2 on MXene for Li-Ion Battery Anodes

    KAUST Repository

    Ahmed, Bilal

    2017-02-24

    In this report, we show that oxide battery anodes can be grown on two-dimensional titanium carbide sheets (MXenes) by atomic layer deposition. Using this approach, we have fabricated a composite SnO2/MXene anode for Li-ion battery applications. The SnO2/MXene anode exploits the high Li-ion capacity offered by SnO2, while maintaining the structural and mechanical integrity by the conductive MXene platform. The atomic layer deposition (ALD) conditions used to deposit SnO2 on MXene terminated with oxygen, fluorine, and hydroxyl-groups were found to be critical for preventing MXene degradation during ALD. We demonstrate that SnO2/MXene electrodes exhibit excellent electrochemical performance as Li-ion battery anodes, where conductive MXene sheets act to buffer the volume changes associated with lithiation and delithiation of SnO2. The cyclic performance of the anodes is further improved by depositing a very thin passivation layer of HfO2, in the same ALD reactor, on the SnO2/MXene anode. This is shown by high-resolution transmission electron microscopy to also improve the structural integrity of SnO2 anode during cycling. The HfO2 coated SnO2/MXene electrodes demonstrate a stable specific capacity of 843 mAh/g when used as Li-ion battery anodes.

  16. Metal oxides and lithium alloys as anode materials for lithium-ion batteries

    CSIR Research Space (South Africa)

    Kebede, M

    2016-07-01

    Full Text Available -generation anode materials for lithium–ion batteries with high prospect of replacing graphite. Most of these anode materials have higher specific capacities between the range of 600-1000 mA h g(sup-1) compared with 340 mA h g(sup-1) of graphite. These high...

  17. Government Governance, Legal Environment and Sustainable Economic Development

    Directory of Open Access Journals (Sweden)

    Feng Wei

    2014-04-01

    Full Text Available Based on China’s inter-provincial panel data from 1999–2009, this paper has tested the impact and extent of marketization, government governance, and legal environment of sustainable economic development by controlling physical capital, human capital and productivity, so as to find the institutional reality for the difference in China’s economic development and another explanation for it. It turns out that marketization, government governance, and legal environment play significant roles in promoting sustainable economic development. Further tests show that the results of Eastern China are consistent with China’s inter-provincial results; while in Western China, the promotion effect of marketization, government governance, and legal environment on sustainable economic development is not significant.

  18. Alignment between business process governance and IT governance

    DEFF Research Database (Denmark)

    Rahimi, Fatemeh; Møller, Charles; Hvam, Lars

    2014-01-01

    frameworks to enable business-IT strategic alignment, efficient process and IT requirements specification, and IT-enabled business value realization. We examine the actuality of this alignment in practice through a case study conducted in a relatively mature multinational corporation. The findings indicate......The importance of business processes and the increasing centrality of IT to an organization's performance have called for a specific focus on business process governance and IT governance in contemporary enterprises. Despite the wide scope of business process management, which covers both business...... and IT domains, and the profound impact of IT on process innovations, the association between business process governance and IT governance remains under-explored. Analyzing the constituting elements of the two governance concepts, we propose the necessity of alignment between business process and IT governance...

  19. Patent system governance. Theorizing about institucional, governance dimension rationale

    OpenAIRE

    Ernesto Guevara Fernández

    2017-01-01

    This work deals with the patent governance as theoretical model for improving the functioning of the patent system. It provides an approach to the patent governance at the various levels, international, national and regional, that challenges the traditional, static patent system based on the central role of the examination and granted office by the new heterogeneous actors, relations between these actors and participatory mechanisms within the patent system. Patent governance impacts the inst...

  20. Anodization and Optical Appearance of Sputter Deposited Al-Zr Coatings

    DEFF Research Database (Denmark)

    Gudla, Visweswara Chakravarthy; Canulescu, Stela; Shabadi, Rajashekhara

    2014-01-01

    and microstructure of the commercial alloys, and even more difficult with recycled alloys. Sputter coating methods promise to control the chemical composition of the Al alloy surfaces and eventually modify the microstructure of the surfaces with heat treatments thus enabling the freedom on the substrate quality....... This paper evaluates the use of magnetron sputtered Al-Zr coatings on Al combined with heat treatment and anodizing for obtaining required optical properties. Metallurgical and optical characterization was carried out to investigate the effect of coating microstructure and anodizing parameters on appearance...... of the anodized layer. The microstructure of the coating is found to influence the appearance of anodized layer owing to the presence of completely or partially dissolved second phases during anodizing process. Oxidation status of the second phase particles in the coatings affected the light absorption...

  1. The Electrowetting and Corrosion Characterizations of Anodized As-Prepared Titanium Dioxide Nanotube

    Science.gov (United States)

    Dang, Trung-Dung; Bui, Thi Thanh Huyen

    2017-06-01

    Uniform titanium dioxide (TiO2) nanotube arrays were prepared via the anodizing of titanium electrodes in hydrofluoric acid containing glycerol. The relationship between the electrochemical fabrication process and nanotube formation was studied. The uniformity and diameter of the titanium dioxide nanotube can be controlled by the anodizing voltage and hydrofluoric acid and glycerol concentration. The wettability can be tuned by coating the titanium electrode with the synthesized titanium dioxide nanotube as demonstrated by the contact angle measurement. The hydrophilic characteristic of the anodized electrode surface decreases when the diameter of the titanium dioxide nanotube decreases. To evaluate the corrosion characteristic of the anodized as-prepared electrode, the electrochemical measurement (potentiostatic) was studied in a physiological saline solution. The results show high corrosion resistance of the anodized electrode. The successful preparation of these titanium dioxide nanotube electrodes offers high corrosion resistance and wetting controllability for bio-microfluidic device applications.

  2. Standard test method for laboratory evaluation of magnesium sacrificial anode test specimens for underground applications

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1997-01-01

    1.1 This test method covers a laboratory procedure that measures the two fundamental performance properties of magnesium sacrificial anode test specimens operating in a saturated calcium sulfate, saturated magnesium hydroxide environment. The two fundamental properties are electrode (oxidation potential) and ampere hours (Ah) obtained per unit mass of specimen consumed. Magnesium anodes installed underground are usually surrounded by a backfill material that typically consists of 75 % gypsum (CaSO4·2H2O), 20 % bentonite clay, and 5 % sodium sulfate (Na2SO4). The calcium sulfate, magnesium hydroxide test electrolyte simulates the long term environment around an anode installed in the gypsum-bentonite-sodium sulfate backfill. 1.2 This test method is intended to be used for quality assurance by anode manufacturers or anode users. However, long term field performance properties may not be identical to property measurements obtained using this laboratory test. Note 1—Refer to Terminology G 15 for terms used ...

  3. Fabrication and assembly of BOLVAPS (boil-off lithium vapor source) ceramic-option half anodes

    Energy Technology Data Exchange (ETDEWEB)

    Moore, R.H.; Appel, D.B.; Cap, J.S.; Spiak, S.H. (Sandia National Labs., Albuquerque, NM (USA)); Cason, B.P.J. (General Electric Co., Largo, FL (USA). Materials and Processes Unit)

    1990-06-01

    In order to generate a lithium vapor on the anode surface within PBFA II, an electrically insulating, lithium-coated substrate is required. One approach for providing this lithium source is the ceramic-option anode. This anode consists of two halves, equatorially split, each containing an insulating ceramic insert onto which a lithium-bearing film is sputtered. A lithium vapor is generated by ohmically pulse heating this film to 1500 K. The half-anode structure required to produce this vapor consists of a ceramic insulator, steel housing, and disk conductors. This report describes the design and fabrication of these separate components and the procedures required to join them to form the half-anode assembly. In addition, appendices are included which contain detailed drawings and specifications for these operations. 5 refs., 10 figs.

  4. Microstructural degradation of Ni-YSZ anodes for solid oxide fuel cells

    DEFF Research Database (Denmark)

    Thydén, Karl Tor Sune

    2008-01-01

    Ni-YSZ cermets have been used as anode materials in SOFCs for more than 20 years. Despite this fact, the major cause of degradation within the Ni-YSZ anode, namely Ni sintering / coarsening, is still not fully understood. Even if microstructural studies of anodes in tested cells......, the microstructural degradation in both electrochemically longterm tested cells and high-temperature aged model materials are studied. Since Ni particle sintering / coarsening is attributed to be the major cause of anode degradation, this subject attains the primary focus. A large part of the work is focused...... since parts of the secondary signals are generated by backscattered electrons. High temperature aging experiments of model Ni-YSZ anode cermets show that Ni sintering / coarsening is significantly increased, not only at higher temperatures, but also when the concentration of H2O in the reducing...

  5. Carbon and Carbon Hybrid Materials as Anodes for Sodium Ion Batteries.

    Science.gov (United States)

    Yu, Yan; Zhong, Xiongwu; Wu, Ying; Zen, Sifan

    2018-02-12

    Sodium ion batteries (SIBs) have attracted much attention for application in large-scale grid energy storage due to the abundance and low-cost sodium sources. However, the low energy density and poor cycling life hinder the practice application of SIBs. Recently, substantial efforts have been made to develop electrode materials to push forward large-scale practical application. Carbon materials can be directly used as anode materials, showing excellent sodium storage performance. Additionally, designing and constructing carbon hybrid materials is an effective strategy to obtain high-performance anodes for SIBs. In this review, we summarize recent research progress of carbon and carbon hybrid materials as anodes for SIBs. Nanostructural design to enhance the sodium storage performance of anode materials is discussed, and we offer some insight on the potential directions and future high-performance anode materials of SIBs. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Comparative study of neutron emission from a plasma focus device using two different anode shapes

    Energy Technology Data Exchange (ETDEWEB)

    Talukdar, N.; Borthakur, S.; Neog, N. K.; Borthakur, T. K., E-mail: tkborthakur@yahoo.co.uk [Centre of Plasma Physics, Institute for Plasma Research, Sonapur, 782402 Kamrup, Assam (India)

    2016-05-15

    The neutron emission from a low energy (2.2 kJ) plasma focus (PF) device operated with two different shapes (cylindrical and converging) of anodes has been investigated by employing photomultiplier tube and bubble dosimeter. The neutron emission with each anode is analyzed and the results are compared. It is found that the anode shapes strongly influenced the emission of neutron. The X-ray emission is found to be higher in case of converging anode, while neutron emission is found to be higher in case of cylindrical anode. The neutron yield and energy are found to be highly anisotropic in nature which indicates that the beam target mechanism plays a major role in the neutron emission in a PF device. The speed factor as well as the specific heat ratio of pinch column shows a good agreement with the experimentally observed results.

  7. Comparative study of neutron emission from a plasma focus device using two different anode shapes

    Science.gov (United States)

    Talukdar, N.; Borthakur, S.; Neog, N. K.; Borthakur, T. K.

    2016-05-01

    The neutron emission from a low energy (2.2 kJ) plasma focus (PF) device operated with two different shapes (cylindrical and converging) of anodes has been investigated by employing photomultiplier tube and bubble dosimeter. The neutron emission with each anode is analyzed and the results are compared. It is found that the anode shapes strongly influenced the emission of neutron. The X-ray emission is found to be higher in case of converging anode, while neutron emission is found to be higher in case of cylindrical anode. The neutron yield and energy are found to be highly anisotropic in nature which indicates that the beam target mechanism plays a major role in the neutron emission in a PF device. The speed factor as well as the specific heat ratio of pinch column shows a good agreement with the experimentally observed results.

  8. Anodic Dissolution of Spheroidal Graphite Cast Iron with Different Pearlite Areas in Sulfuric Acid Solutions

    Directory of Open Access Journals (Sweden)

    Yoshikazu Miyata

    2013-01-01

    Full Text Available The rate equation of anodic dissolution reaction of spheroidal graphite cast iron in sulfuric acid solutions at 298 K has been studied. The cast irons have different areas of pearlite. The anodic Tafel slope of 0.043 V decade−1 and the reaction order with respect to the hydroxyl ion activity of 1 are obtained by the linear potential sweep technique. The anodic current density does not depend on the area of pearlite. There is no difference in the anodic dissolution reaction mechanisms between pure iron and spheroidal graphite cast iron. The anodic current density of the cast iron is higher than that of the pure iron.

  9. Influence of working gas properties on MWPC anode wire modulation effect

    Science.gov (United States)

    Wang, Xiao-Hu; Chen, Xiao-Qiang

    2015-10-01

    For MWPCs used for X-ray position detection, simulation studies of the anode wire modulation effect of the detector were carried out using the Garfield program. Different gas mixtures were used as the working gas in the simulation, so as to obtain the influence of the X-ray cross section and electron diffusion coefficient of the working gases on the anode wire modulation effect of an MWPC with anode wire spacing of 2 mm. Results show that, though a working gas with higher X-ray cross section implies a larger average drift distance for the ionized electrons, such gas mixtures are of little use in improving the anode wire modulation effect of MWPCs. It is found that the transverse electron diffusion coefficient is the determining factor for the extent of the anode wire modulation effect in the detector. Supported by Scientific Research Fund of Sichuan Provincial Education Department (11ZA140)

  10. Sulfur Poisoning of Ni/stabilized-zirconia Anodes – Effect on Long-Term Durability

    DEFF Research Database (Denmark)

    Hauch, Anne; Hagen, Anke; Hjelm, Johan

    2013-01-01

    Sulfur impurities in carbon containing fuels for solid oxide fuel cells (SOFC), e.g. natural gas and biogas, can lead to significant losses in performance due to the sulfur sensitivity of Ni/YSZ SOFC anodes. Full cells having Ni/YSZ and Ni/ScYSZ anodes have been characterized during long-term gal......Sulfur impurities in carbon containing fuels for solid oxide fuel cells (SOFC), e.g. natural gas and biogas, can lead to significant losses in performance due to the sulfur sensitivity of Ni/YSZ SOFC anodes. Full cells having Ni/YSZ and Ni/ScYSZ anodes have been characterized during long...... to focus on the long-term effect over a few hundred of hours. This work describes and correlates the observed evolution of anode performance, over hundreds of hours, with sulfur poisoning with the different operating conditions....

  11. Magnesium stannide as a high-capacity anode for magnesium-ion batteries

    Science.gov (United States)

    Nguyen, Dan-Thien; Song, Seung-Wan

    2017-11-01

    Driven by the limited global resources of lithium, magnesium metal batteries are considered as potential energy storage systems. The battery chemistry of magnesium metal anode, however, limits the selection of electrolytes, cathode materials and working temperature, making the realization of magnesium metal batteries complicated. Herein, we report the development of a new magnesium-insertion anode, magnesium stannide (Mg2Sn), and demonstrate reversible electrochemical Mg2+-extraction and insertion of Mg2Sn anode at 0.2 V versus Mg, delivering discharge capacity of 270 mAhg-1 in a half-cell with the electrolyte of PhMgCl/THF and enabling of room temperature magnesium-ion batteries with Mg2Sn anode combined with Mg-free oxide cathode and conventional-type electrolyte of Mg(TFSI)2/diglyme. The combination of Mg2Sn anode with various cathodes and electrolytes holds great promise for enabling room temperature magnesium-ion batteries.

  12. Modeling and simulation of the anode in direct ethanol fuels cells

    Energy Technology Data Exchange (ETDEWEB)

    Sousa, Ruy Jr.; dos Anjos, Daniela Marques [Instituto de Quimica de Sao Carlos, Universidade de Sao Paulo, Av. Trabalhador Saocarlense, 400, C. P. 780, 13560-970 Sao Carlos, SP (Brazil); Laboratoire de Catalyse en Chimie Organique, Universite de Poitiers, 40, Av. du Recteur Pineau, 86022 Poitiers (France); Tremiliosi-Filho, Germano; Gonzalez, Ernesto Rafael [Instituto de Quimica de Sao Carlos, Universidade de Sao Paulo, Av. Trabalhador Saocarlense, 400, C. P. 780, 13560-970 Sao Carlos, SP (Brazil); Coutanceau, Christophe; Sibert, Eric; Leger, Jean-Michel; Kokoh, Kouakou Boniface [Laboratoire de Catalyse en Chimie Organique, Universite de Poitiers, 40, Av. du Recteur Pineau, 86022 Poitiers (France)

    2008-05-15

    Mathematical modeling has been extensively applied to the study and development of fuel cells. In this work, the objective is to characterize a mechanistic model for the anode of a direct ethanol fuel cell and perform appropriate simulations. The software Comsol Multiphysics {sup registered} (and the Chemical Engineering Module) was used in this work. The software Comsol Multiphysics {sup registered} is an interactive environment for modeling scientific and engineering applications using partial differential equations (PDEs). Based on the finite element method, it provides speed and accuracy for several applications. The mechanistic model developed here can supply details of the physical system, such as the concentration profiles of the components within the anode and the coverage of the adsorbed species on the electrode surface. Also, the anode overpotential-current relationship can be obtained. To validate the anode model presented in this paper, experimental data obtained with a single fuel cell operating with an ethanol solution at the anode were used. (author)

  13. Solid oxide fuel cell power plant with an anode recycle loop turbocharger

    Science.gov (United States)

    Saito, Kazuo; Skiba, Tommy; Patel, Kirtikumar H.

    2015-07-14

    An anode exhaust recycle turbocharger (100) has a turbocharger turbine (102) secured in fluid communication with a compressed oxidant stream within an oxidant inlet line (218) downstream from a compressed oxidant supply (104), and the anode exhaust recycle turbocharger (100) also includes a turbocharger compressor (106) mechanically linked to the turbocharger turbine (102) and secured in fluid communication with a flow of anode exhaust passing through an anode exhaust recycle loop (238) of the solid oxide fuel cell power plant (200). All or a portion of compressed oxidant within an oxidant inlet line (218) drives the turbocharger turbine (102) to thereby compress the anode exhaust stream in the recycle loop (238). A high-temperature, automotive-type turbocharger (100) replaces a recycle loop blower-compressor (52).

  14. Project governance: "Schools of thought"

    Directory of Open Access Journals (Sweden)

    Michiel Christiaan Bekker

    2014-02-01

    Full Text Available The terminology, definition and context of project governance have become a focal subject for research and discussions in project management literature. This article reviews literature on the subject of project governance and categorise the arguments into three schools of thought namely the single-firm school, multi-firm school and large capital school. The single-firm school is concerned with governance principles related to internal organisational projects and practice these principles at a technical level. The multi-firm school address the governance principles concerned with two of more organisations participating on a contractual basis on the same project and focus their governance efforts at the technical and strategic level. The large capital school consider projects as temporary organisations, forming their own entity and establishing governance principles at an institutional level. From these schools of thought it can be concluded that the definition of project governance is dependent on the type of project and hierarchical positioning in the organisation. It is also evident that further research is required to incorporate other governance variables and mechanisms such as transaction theory, social networks and agency theory. The development of project governance frameworks should also consider the complexity of projects spanning across international companies, across country borders and incorporating different value systems, legal systems, corporate governance guidelines, religions and business practices.

  15. Preventive self-governance

    Directory of Open Access Journals (Sweden)

    Sturloni Giancarlo

    2003-06-01

    Full Text Available No field of western society has remained untouched by the events of September 11. Lastly, science and science communication are also bearing the consequences. During the annual meeting of the American Association for the Advancement of Science in Denver, Colorado, on February 15, 2003, the major international scientific magazines, faced with the bioterrorism alarm and the fear of seeing important information fall in the wrong hands, announced their intention to resort to an unprecedented security measure: preventive self-governance.1 They consider the Statement on Scientific Publication and Security as a manifesto of the sense of responsibility that the scientific community feels about global terror. In part four, after recalling the 9/11tragedy, the 32 publishers, scientific associations and scientists who signed the Statement (among which also the directors of Nature and Science stated that “On occasion an editor may conclude that the potential harm of publication outweighs the potential societal benefits. Under such circumstances, the paper should be modified, or not be published ”

  16. Democracy over governance

    Directory of Open Access Journals (Sweden)

    Amelia Correa

    2013-12-01

    Full Text Available Varieties of institutional economics are available to evaluate varieties of capitalism. These methodologies dig behind preferences and technology to arrive at the ground on which agents make choices. The individual is at the foundation of these edifices, neoclassical and otherwise. Consequently, the denouement of all these models is that the market knows best in the absence of effective counterfactuals. A natural corollary is that the task of the government is to set effective mechanisms in place in order to approach the best outcomes. In contrast, we propose a framework which contends with the modern economy as an aggregate that evolves in historical time. Problems like effective demand failures are endemic to capitalist economies. Therefore, systematic State intervention is essential to their functioning. In particular, political economy teaches us that intervention must be in the interest of wage earners. In contrast to the earlier model, the fabric of norms and conventions that facilitate the growth and development of economies must emerge from the consciousness and practices of the working class.

  17. Surface nanotopography of an anodized Ti–6Al–7Nb alloy enhances cell growth

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Her-Hsiung [Department of Dentistry, National Yang-Ming University, Taipei 112, Taiwan (China); Graduate Institute of Basic Medical Science, China Medical University, Taichung 404, Taiwan (China); Department of Biomedical Informatics, Asia University, Taichung 413, Taiwan (China); Department of Stomatology, Taipei Veterans General Hospital, Taipei 112, Taiwan (China); Wu, Chia-Ping [Institute of Oral Biology, National Yang-Ming University, Taipei 112, Taiwan (China); Sun, Ying-Sui [Department of Dentistry, National Yang-Ming University, Taipei 112, Taiwan (China); Yang, Wei-En [Institute of Oral Biology, National Yang-Ming University, Taipei 112, Taiwan (China); Lee, Tzu-Hsin, E-mail: biomaterials@hotmail.com [School of Dentistry, Chung Shan Medical University, Taichung 402, Taiwan (China); Oral Medicine Center, Chung Shan Medical University Hospital, Taichung 402, Taiwan (China)

    2014-12-05

    Highlights: • An electrochemical anodization was applied to α/β-type Ti–6Al–7Nb alloy surface. • Anodized surface had a nontoxic nanoporous topography. • Anodized surface increased proteins adsorption due to nanotopography. • Anodized surface enhanced cell growth due to nanotopography. • Electrochemical anodization has potential as implant surface treatment. - Abstract: The α/β-type Ti–6Al–7Nb alloy is a potential replacement for α/β-type Ti–6Al–4V alloy, which is widely used in biomedical implant applications. The biological response to implant material is dependent on the surface characteristics of the material. In the present study, a simple and fast process was developed to perform an electrochemical anodization treatment on Ti–6Al–7Nb alloy. The proposed process yielded a thin surface nanotopography, which enhanced cell growth on the Ti–6Al–7Nb alloy. The surface characteristics, including the morphology, wettability, and protein adsorption, were investigated, and the cytotoxicity was evaluated according to International Organization for Standardization 10993-5 specifications. Cell adhesion of human bone marrow mesenchymal stem cells on the test specimens was observed via fluorescence microscopy and scanning electron microscopy. The anodization process produced a surface nanotopography (pore size <100 nm) on anodized Ti–6Al–7Nb alloy, which enhanced the wettability, protein adsorption, cell adhesion, cell migration, and cell mineralization. The results showed that the surface nanotopography produced using the proposed electrochemical anodization process enhanced cell growth on anodized Ti–6Al–7Nb alloy for implant applications.

  18. Impact of Reduction Parameters on the Initial Performance and Stability of Ni/(Sc)YSZ Cermet Anodes for SOFCs

    DEFF Research Database (Denmark)

    Ebbehøj, Søren Lyng; Ramos, Tania; Mogensen, Mogens Bjerg

    2012-01-01

    In-situ reduction of Ni cermet anodes produces the porosity and influences the microstructure, performance and stability of the anodes. The impact on initial performance, stability and microstructure of two different reduction procedures currently in use at DTU Energy Conversion with reduction...... stability under high steam conditions was evaluated, and very stable performances and microstructures of the anode layers were observed....

  19. An Indium-Free Anode for Large-Area Flexible OLEDs: Defect-Free Transparent Conductive Zinc Tin Oxide

    NARCIS (Netherlands)

    Morales-Masis, M.; Dauzou, F.; Jeangros, Q.; Dabirian, A.; Lifka, H.; Gierth, R.; Ruske, M.; Moet, D.; Hessler-Wyser, A.; Ballif, C.

    2016-01-01

    Flexible large-area organic light-emitting diodes (OLEDs) require highly conductive and transparent anodes for efficient and uniform light emission. Tin-doped indium oxide (ITO) is the standard anode in industry. However, due to the scarcity of indium, alternative anodes that eliminate its use are

  20. Government governance, executive networks and enterprise R&D

    Directory of Open Access Journals (Sweden)

    Xin Jin

    2016-03-01

    Full Text Available The increasingly competitive market environment makes independent innovation the core of the enterprise’s and evens the country’s competitiveness. In order to solve the problem of its own limited R&D resources, firms need to find access to outside resources. Since the government mainly provides policy and financial support, the information diffusion and learning effects of executive networks can effectively compensate for the shortage of formal institutional arrangements. In view of this, we manually collect data on R&D expenditures and executive networks having common management members in China A-share listed companies from 2007 to 2010. Combined with corporate governance and government governance data, this paper empirically tests the influence of government governance and executive networks on enterprise innovation. The empirical results reveal that the governance efficiency of the government where the enterprise is located determines the efficiency of resource allocation firms are faced with, which provides institutional constraints on corporate R&D intensity, and that the establishment and scale of executive networks do contribute to R&D decisions. Further testing shows that compared with non-state-owned enterprises, state-owned enterprises are faced with relatively weaker restraints and pressures in terms of policy, finance, technology and competition. Thus, they show no obvious reliance on government governance quality and the information diffusion of executive networks. The findings of this study help us to understand the role of informal systems in social economics, such as relationship networks and social capital, in the context of China’s economic development, and provide relevant evidence and enrich macro and micro studies of “government and market” and “market and enterprise” relationships.

  1. Jaarboek corporate governance 2011-2012

    NARCIS (Netherlands)

    Lückerath – Rovers, M.; Bier, B.; Kaptein, M.; Paape, L.

    2011-01-01

    In dit eerste Jaarboek Corporate Governance worden uiteenlopende aspecten van Corporate Governance nader besproken door toonaangevende schrijvers uit verschillende disciplines. Inclusief actuele corporate governance code.

  2. Anodization increases early integration of Osstem implants in sheep femurs.

    Science.gov (United States)

    Duncan, Warwick J; Lee, Min Ho; Dovban, Alex S M; Hendra, Nicholas; Ershadi, Sara; Rumende, Heny

    2008-06-01

    Spark discharge anodic oxidation forms a porous TiO2 film on the surface of titanium oral implants, increasing surface roughness and concentrations of calcium and phosphate ions. In this study, anodic-treated oral implants were placed in an animal model and analysed using clinical, micro-computerized tomographic (micro-CT) and histometric techniques. Pairs of 3.5 mm x 8.5 mm long titanium implants (Osstem Implant Co., Ltd. Seoul, Korea), with blasted (control) or blasted and oxidized surfaces (test), were placed into the right femoral condyles of 10 sheep. Animals were sacrificed after 1 month unloaded healing. Resonant frequency analysis (RFA) was measured in implant stability quotient (ISQ) using the Mentor II device. Specimens were scanned using medium resolution micro-CT (Skyscan 1172). Mean percent bone-to-implant contact (%BIC) was calculated from two images per implant by three different operators, using Image J software. Inter- and intra-examiner differences were calculated. Specimens were then embedded in methacrylate and undemineralized ground sections were digitized. Mean %BIC was measured using Image J at x 20 magnification for the best-three consecutive threads from the most central section. Mean micro-CT %BIC was similar for control and test (57.2 +/- 0.05% versus 56.4 +/- 0.03%, p = 0.5). There was considerable inter-examiner variability (interclass correlation coefficient = 0.44). RFA showed no clinically-detectable difference between the two groups (control ISQ: 75.2 +/- 4.2; test ISQ: 76.3 +/- 1.7; p = 0.48). However, histometric analysis found a marked and highly statistically-significant difference (%BIC Test 72.5 +/- 8.6%, Control 46.2 +/- 12.1%, p = 0.01). The novel anodic oxidation technique increased early ossointegration of rough-surfaced implants by 157%. Neither clinical testing with resonant frequency analysis nor radiographic analysis using micro-CT had sufficient resolution to detect this improvement. Whether this gain in early bone

  3. INTERNATIONAL GOVERNMENT SECURITIES: SPECIFIC FUNCTIONING

    Directory of Open Access Journals (Sweden)

    N. Versal

    2013-11-01

    Full Text Available It’s disclosed the features of the international government securities market during 1993 – 2012: main players are the developed countries (Western Europe, Canada, USA with the increasing role of developing countries; debt crises have the negative impact as on the development of the international government securities market, but also on the international capital market as a whole; debt crises are not a spontaneous phenomenon, and usually occur as a result of inadequate growth in GDP increasing government debt.

  4. Corporate governance of the environment.

    OpenAIRE

    Purvis, B.

    2005-01-01

    The global pursuit of a more sustainable future cannot be achieved without the active engagement of the business community. The challenge for business has been to strategically engage with and embed environmental responsibility within their wider corporate governance to create effective corporate governance of the environment. The assumption would appear to be, that we have already witnessed the construction of such governance, delivered through the attainment of a paradigmatic shift in corpo...

  5. Governance and Australian Financial Institutions

    OpenAIRE

    Kevin Davis

    1998-01-01

    This paper examines issues of corporate governance arising from the activities of financial institutions and markets. It is argued that governance problems are particularly severe in financial institutions vis-a-vis firms in other industries, and particularly important for society given the central role of financial institutions and markets in the financing and corporate governance activities of the economy. Processes of financial reform and financial system design have, it is argued, general...

  6. Translating diversity to Internet governance

    OpenAIRE

    Napoli, Philip M.; Karppinen, Kari

    2013-01-01

    This paper examines the emergence of diversity as a guiding principle of Internet governance.  This paper compares how diversity is being interpreted and applied in Internet governance discourse and related research with its interpretation and application in traditional communications policy-making and policy research.  As this paper illustrates, a somewhat more narrow conceptualization of diversity has developed within the Internet governance context than has been the case in traditional com...

  7. Evolution of Russian Corporate Governance

    OpenAIRE

    Mizobata, Satoshi

    2005-01-01

    The Russian corporate governance has evolved since the 1998 financial crisis. The author examines both normalization and preservation in the corporate structure, which can simultaneously be observed in the adaptation of Russian enterprises. The Russian corporate governance reflects the unique interests of its stakeholders and the embedded features of the society, for which the reforms are insufficient from the microeconomic aspects. Since the characteristics of corporate governance in Russia ...

  8. Transformative environmental governance | Science Inventory ...

    Science.gov (United States)

    Transformative governance is an approach to environmental governance that has the capacity to respond to, manage, and trigger regime shifts in coupled social-ecological systems (SESs) at multiple scales. The goal of transformative governance is to actively shift degraded SESs to alternative, more desirable, or more functional regimes by altering the structures and processes that define the system. Transformative governance is rooted in ecological theories to explain cross-scale dynamics in complex systems, as well as social theories of change, innovation, and technological transformation. Similar to adaptive governance, transformative governance involves a broad set of governance components, but requires additional capacity to foster new social-ecological regimes including increased risk tolerance, significant systemic investment, and restructured economies and power relations. Transformative governance has the potential to actively respond to regime shifts triggered by climate change, and thus future research should focus on identifying system drivers and leading indicators associated with social-ecological thresholds. Transformative governance has the potential to actively respond to regime shifts triggered by climate change, and thus future research should focus on identifying system drivers and leading indicators associated with social-ecological thresholds.

  9. Governance and Foreign Aid Allocation

    National Research Council Canada - National Science Library

    Akramov, Kamiljon T

    2006-01-01

    .... Specifically, the study explores how different categories of aid affect economic growth, whether the quality of governance is significant in explaining differences in economic growth, and whether...

  10. Dawn of e-government

    DEFF Research Database (Denmark)

    Henriksen, Helle Zinner; Damsgaard, Jan

    2007-01-01

    Most countries have defined strategies for e-government. The objectives for implementing e-government are often defined but the means for fuelling the adoption and diffusion of e-government are typically less well clear in the policy statements. The present study assesses the impact of latest...... internally and externally. The e-Day initiative represents a drastic change in the former policy statements concerning IT adoption and diffusion in Danish government. The policy statements had previously been based on voluntary adoption focusing on visions and pedagogical intervention in governmental...

  11. Government influence on patient organizations.

    Science.gov (United States)

    Van de Bovenkamp, Hester M; Trappenburg, Margo J

    2011-12-01

    Patient organizations increasingly play an important role in health care decision-making in Western countries. The Netherlands is one of the countries where this trend has gone furthest. In the literature some problems are identified, such as instrumental use of patient organizations by care providers, health insurers and the pharmaceutical industry. To strengthen the position of patient organizations government funding is often recommended as a solution. In this paper we analyze the ties between Dutch government and Dutch patient organizations to learn more about the effects of such a relationship between government and this part of civil society. Our study is based on official government documents and existing empirical research on patient organizations. We found that government influence on patient organizations has become quite substantial with government influencing the organizational structure of patient organizations, the activities these organizations perform and even their ideology. Financing patient organizations offers the government an important means to hold them accountable. Although the ties between patient organizations and the government enable the former to play a role that can be valued as positive by both parties, we argue that they raise problems as well which warrant a discussion on how much government influence on civil society is acceptable.

  12. COMPARATIVE STUDY ON CORPORATE GOVERNANCE

    Directory of Open Access Journals (Sweden)

    Gavrea Corina

    2011-12-01

    Full Text Available Corporate governance is a key element of today’s economic reality being more and more present in many countries around the world. This paper has two main objectives. The first one is to offer more insight into the concept of corporate governance by a thorough literature review and by presenting and analyzing a framework of corporate governance. The second objective of this paper is to investigate the corporate governance situation in three developing economies (Romania, Bulgaria and Hungary. The World Bank and the European Bank for Reconstruction and Development published a series of reports on corporate governance. The present study uses data from these reports in order to illustrate how these developing economies are dealing with corporate governance. Based on ROSC Reports a corporate governance score was calculated. As this score shows, there is room for improvement for all three developing economies. This study is important because it shows the differences in corporate governance among developing economies and the need to study these nations at the individual country level. Corporate governance has many benefits for developing economies. It helps developing economies to register sustainable growth rates, to increases investors’ confidence in the national economy, and to increase the ability of capital markets to mobilize savings.

  13. Characterizing Government Social Media Research

    DEFF Research Database (Denmark)

    Medaglia, Rony; Zheng, Lei

    2016-01-01

    -government and Information Systems (IS) fields to identify research foci and gaps. We propose a research-grounded model that identifies the foci on context, user characteristics, user behaviour, design, management, and effects, and highlight the investigated relationships among them. Based on this analysis, we identify......As research on government social media continues to grow in quantity and scope, this area calls for mapping and systematization, in order to stimulate better-informed studies in the future. This paper draws on a comprehensive review of government social media literature in the e...... a four-point research agenda for future government social media research....

  14. Good government and good governance: record keeping in a ...

    African Journals Online (AJOL)

    This article addresses the challenges that arise when record keeping systems are advocated as a necessary under-pinning for good government and good governance. The relationship between record keeping and accountability is analysed and contextualised in relation to transparency and Freedom of Information ...

  15. Governance of Higher Education--Implementation of Project Governance

    Science.gov (United States)

    Macheridis, Nikos

    2017-01-01

    This article focuses on coordination between governance actors in higher education. The object of the study is a department at a public university, seen as a multi-project environment. The purpose of this article is to illustrate and analyze project governance as a tool that allows departmental management to coordinate with the authorities, the…

  16. E-Government for Good Governance in Developing Countries ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    E-government for good governance in developing countries : empirical evidence from the eFez project / Driss Kettani and Bernard Moulin. pages cm. Includes bibliographical references and index. ISBN 978-0-85728-125-8 (hardback : alk. paper). 1. Internet in public administration–Developing countries. I. Moulin, Bernard ...

  17. Danish Experiences with Coalition Governments and Coalition Governance

    DEFF Research Database (Denmark)

    Christiansen, Flemming Juul; Klemmensen, Robert

    2015-01-01

    In this chapter we outline the Danish and Scandinavian experiences with coalition governments and coalition governance. We do so by first briefly describing the historical path that has led to the political system we see working today in these countries. Then we tell about the political culture...

  18. Adopting service governance governing portfolio value for sound corporate citzenship

    CERN Document Server

    AXELOS, AXELOS

    2015-01-01

    Adopting Service Governance provides a useful umbrella for a number of frameworks including ITIL®, TOGAF®, COBIT®, ITSM, BSM, Business Analysis, Programme Management, Management of Value, Management of Portfolios and Management of Risk by establishing the top-down governance of an organisation through services.

  19. Anthracite as a candidate for lithium ion battery anode

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Y.J.; Yang, H.J.; Yoon, S.H.; Korai, Y.; Mochida, I.

    2003-07-01

    Four kinds of anthracites from different regions were investigated as anodic materials of Li ion secondary battery by varying their calcination temperatures. Hon-gye anthracite calcined at 1000-1150 {sup o}C showed a high reversible capacity at low potential region of 0-0.12 V, which is typical with hard carbon. The highest capacity of 370 mAh/g was obtained with the Hon-gye among anthracites calcined at 1100{sup o}C. The graphitization started with the anthracite above 1600{sup o}C to provide capacity at ca. 0.2 V which reflects the intercalation of graphitic carbon. The anthracite calcined at 1000-1150{sup o}C was indicated to carry the largest d(002) and smallest Lc(002). The large capacity of the anthracite as hard carbon is ascribed to its many micropores among the smallest graphite units which can accommodate highly reduced lithium ions.

  20. Reactivity descriptors for direct methanol fuel cell anode catalysts

    DEFF Research Database (Denmark)

    Ferrin, Peter; Nilekar, Anand Udaykumar; Greeley, Jeff

    2008-01-01

    We have investigated the anode reaction in direct methanol fuel cells using a database of adsorption free energies for 16 intermediates on 12 close-packed transition metal surfaces calculated with periodic, self-consistent, density functional theory (DFT-GGA). This database, combined with a simple...... electrokinetic model of the methanol electrooxidation reaction, yields mechanistic insights that are consistent with previous experimental and theoretical studies on Pt, and extends these insights to a broad spectrum of other transition metals. In addition, by using linear scaling relations between...... the adsorption free energies of various intermediates in the reaction network, we find that the results determined with the full database of adsorption energies can be estimated by knowing only two key descriptors for each metal surface: the free energies of OH and CO on the surface. Two mechanisms for methanol...