WorldWideScience

Sample records for proximity gettering mechanism

  1. Copper in silicon: Quantitative analysis of internal and proximity gettering

    Energy Technology Data Exchange (ETDEWEB)

    McHugo, S.A. [Lawrence Berkeley National Lab., CA (United States); Flink, C.; Weber, E.R. [Univ. of California, Berkeley, CA (United States)] [and others

    1997-08-01

    The behavior of copper in the presence of a proximity gettering mechanism and a standard internal gettering mechanism in silicon was studied. He implantation-induced cavities in the near surface region were used as a proximity gettering mechanism and oxygen precipitates in the bulk of the material provided internal gettering sites. Moderate levels of copper contamination were introduced by ion implantation such that the copper was not supersaturated during the anneals, thus providing realistic copper contamination/gettering conditions. Copper concentrations at cavities and internal gettering sites were quantitatively measured after the annealings. In this manner, the gettering effectiveness of cavities was measured when in direct competition with internal gettering sites. The cavities were found to be the dominant gettering mechanism with only a small amount of copper gettered at the internal gettering sites. These results reveal the benefits of a segregation-type gettering mechanism for typical contamination conditions.

  2. Dominant iron gettering mechanism in p/p+ silicon wafers

    Science.gov (United States)

    Lin, Wen; Benton, J. L.; Pinacho, R.; Ramappa, D. A.; Henley, W.

    2000-07-01

    Fe gettering mechanisms in p/p+ epitaxial Si were investigated under controlled contamination and annealing cycles. The dominant Fe gettering mechanism is the Fermi level controlled coulomb attraction between Fe+ and B- in the p+ substrate of the p/p+ wafers. Oxygen precipitates do not appear to contribute when using normal cooling rates following heat treatments. The epi-substrate interfacial strain plays no role in Fe gettering.

  3. Mechanisms of transition-metal gettering in silicon

    Science.gov (United States)

    Myers, S. M.; Seibt, M.; Schröter, W.

    2000-10-01

    The atomic process, kinetics, and equilibrium thermodynamics underlying the gettering of transition-metal impurities in Si are reviewed. Methods for mathematical modeling of gettering are discussed and illustrated. Needs for further research are considered.

  4. Mechanisms of transition-metal gettering in silicon

    Energy Technology Data Exchange (ETDEWEB)

    MYERS JR.,SAMUEL M.; SEIBT,M.; SCHROTER,W.

    2000-03-23

    The atomic process, kinetics, and equilibrium thermodynamics underlying the gettering of transition-metal impurities in Si are reviewed from a mechanistic perspective. Methods for mathematical modeling of gettering are reviewed and illustrated. Needs for further research are discussed.

  5. Proximity gettering technology for advanced CMOS image sensors using carbon cluster ion-implantation technique. A review

    Energy Technology Data Exchange (ETDEWEB)

    Kurita, Kazunari; Kadono, Takeshi; Okuyama, Ryousuke; Shigemastu, Satoshi; Hirose, Ryo; Onaka-Masada, Ayumi; Koga, Yoshihiro; Okuda, Hidehiko [SUMCO Corporation, Saga (Japan)

    2017-07-15

    A new technique is described for manufacturing advanced silicon wafers with the highest capability yet reported for gettering transition metallic, oxygen, and hydrogen impurities in CMOS image sensor fabrication processes. Carbon and hydrogen elements are localized in the projection range of the silicon wafer by implantation of ion clusters from a hydrocarbon molecular gas source. Furthermore, these wafers can getter oxygen impurities out-diffused to device active regions from a Czochralski grown silicon wafer substrate to the carbon cluster ion projection range during heat treatment. Therefore, they can reduce the formation of transition metals and oxygen-related defects in the device active regions and improve electrical performance characteristics, such as the dark current, white spot defects, pn-junction leakage current, and image lag characteristics. The new technique enables the formation of high-gettering-capability sinks for transition metals, oxygen, and hydrogen impurities under device active regions of CMOS image sensors. The wafers formed by this technique have the potential to significantly improve electrical devices performance characteristics in advanced CMOS image sensors. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  6. Gettering simulator: physical basis and algorithm

    Science.gov (United States)

    Hieslmair, H.; Balasubramanian, S.; Istratov, A. A.; Weber, E. R.

    2001-07-01

    The basic physical principles and mechanisms of gettering of metal impurities in silicon are well established. However, a predictive model of gettering that would enable one to determine what fraction of contaminants will be gettered in a particular process and how the existing process should be modified to optimize gettering is lacking. Predictive gettering of transition metals in silicon requires development of a robust algorithm to model diffusion and precipitation of transition metals in silicon, and material parameters to describe the kinetics of defect reactions and the stable equilibrium state of the formed complexes. This paper describes the algorithm of a gettering simulator, capable of modelling relaxation and segregation gettering of interstitially diffusing transition metal impurities in silicon wafers. The basic physical equations used to model gettering are differential equations for diffusion, precipitation and segregation. These equations are solved using the implicit finite-difference algorithm, based on the underlying physics of the problem. The material parameters required as input for the gettering simulator such as segregation coefficient, precipitation site density and precipitation radius, which need to be obtained experimentally, are briefly discussed.

  7. Porous silicon gettering

    Energy Technology Data Exchange (ETDEWEB)

    Tsuo, Y.S.; Menna, P.; Pitts, J.R. [National Renewable Energy Lab., Golden, CO (United States)] [and others

    1996-05-01

    The authors have studied a novel extrinsic gettering method that uses the large surface areas produced by a porous-silicon etch as gettering sites. The annealing step of the gettering used a high-flux solar furnace. They found that a high density of photons during annealing enhanced the impurity diffusion to the gettering sites. The authors used metallurgical-grade Si (MG-Si) prepared by directional solidification casing as the starting material. They propose to use porous-silicon-gettered MG-Si as a low-cost epitaxial substrate for polycrystalline silicon thin-film growth.

  8. Porous silicon gettering

    Energy Technology Data Exchange (ETDEWEB)

    Tsuo, Y.S.; Menna, P.; Al-Jassim, M. [National Renewable Energy Lab., Golden, CO (United States)] [and others

    1995-08-01

    We have studied a novel extrinsic gettering method that utilizes the very large surface areas, produced by porous silicon etch on both front and back surfaces of the silicon wafer, as gettering sites. In this method, a simple and low-cost chemical etching is used to generate the porous silicon layers. Then, a high-flux solar furnace (HFSF) is used to provide high-temperature annealing and the required injection of silicon interstitials. The gettering sites, along with the gettered impurities, can be easily removed at the end the process. The porous silicon removal process consists of oxidizing the porous silicon near the end the gettering process followed by sample immersion in HF acid. Each porous silicon gettering process removes up to about 10 {mu}m of wafer thickness. This gettering process can be repeated so that the desired purity level is obtained.

  9. Copper gettering by aluminum precipitates in aluminum-implanted silicon

    Science.gov (United States)

    Petersen, G. A.; Myers, S. M.

    2001-04-01

    Copper in Si is shown to be strongly gettered by Al-rich precipitates formed by implanting Al to supersaturation and then annealing. At temperatures ranging from 600 to 800 °C a layer containing Al precipitates is found to getter Cu from Cu silicide located on the opposite side of a 0.25 mm Si wafer, indicating a substantially lower chemical potential for the Cu in the molten-Al phase. Cu gettering proceeds rapidly until an atomic ratio of approximately 2 Cu atoms to 1 Al atom is reached in the precipitated Al region, after which the gettering process slows down. Redistribution of Cu from one Al-rich layer to another at low Cu concentrations demonstrates that a segregation-type gettering mechanism is operating. Cu gettering occurs primarily in the region containing the precipitated Al rather than in the region where the Al is entirely substitutional.

  10. Evolution of gettering technologies for vacuum tubes to getters for MEMS

    Science.gov (United States)

    Amiotti, M.

    2008-05-01

    development of Micro Electro Mechanical Systems (MEMS) with moving parts in a vacuum environment required the development of a new generation of getter film, few microns thick, that can be selectively patterned onto a silicon or glass wafer (usually 4'' or 8''). This wafer with patterned getter film can be used directly as the cap wafer of a wafer to wafer bonded MEMS structure, assuring long life and reliability to the moving MEMS structure especially in automotive applications where thermal cycles are required for qualification.

  11. Gettering of metal impurities in silicon

    Energy Technology Data Exchange (ETDEWEB)

    Schroeter, W.; Spiecker, E.; Apel, M. [Universitaet Goettingen (Germany)

    1995-08-01

    Gettering means the removal of metallic impurities from the device-active area of the wafer by transport to a predesigned region-called gettering layer (GL). We introduce an interface at z = d{sub GL}, at which the effect of the gettering mechanism on the metal impurity distribution in the wafer is quantified, e.g. by specifying currents or by interfacial reactions of metal impurities, self interstitials etc. between GL and wafer. In response metal impurities will diffuse out of the wafer into the gettering layer. Following such a concept, in general three species of the metal impurity (M) are involved in gettering: M{sub p} {l_arrow} M{sub i} {l_arrow} M{sub GL}. M{sub p} denotes immobile species in the wafer, which are precipitated into suicides or segregated at extended defects or whose diffusivity is too small to contribute noticeably to transport during the gettering procedure - like many substitutional metal species.

  12. MECHANICAL ALLOYING AND THERMAL TREATMENT FOR PRODUCTION OF ZIRCONIUM IRON HYDROGEN ISOTOPE GETTERS

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K.

    2008-02-20

    The objective of this task was to demonstrate that metal hydrides could be produced by mechanical alloying in the quantities needed to support production-scale hydrogen isotope separations. Three starting compositions (ratios of elemental Zr and Fe powders) were selected and attritor milled under argon for times of 8 to 60 hours. In general, milling times of at least 24 hours were required to form the desired Zr{sub 2}Fe and Zr{sub 3}Fe phases, although a considerable amount of unalloyed Zr and Fe remained. Milling in liquid nitrogen does not appear to provide any advantages over milling in hexane, particularly due to the formation of ZrN after longer milling times. Carbides of Zr formed during some of the milling experiments in hexane. Elemental Zr was present in the as-milled material but not detected after annealing for milling times of 48 and 60 hours. It may be that after intimate mixing of the powders in the attritor mill the annealing temperature was sufficient to allow for the formation of a Zr-Fe alloy. Further investigation of this conversion is necessary, and could provide an opportunity for reducing the amount of unreacted metal powder after milling.

  13. Magnetically stabilized plasma sources of getter films

    Energy Technology Data Exchange (ETDEWEB)

    Karpov, D.; Saksagansky, G. (Div. Efremov Scientific Research Inst. of Electrophysical Apparatus, Leningrad (USSR))

    1990-01-01

    Modern state and ways of development of getter film plasma sources with the magnetic stabilization (GFPS) are considered. The description of physical mechanism of the magnetic stabilization, GFPS constructions and technical characteristics, their confronting parameters and the main factors defining usage perspectives is presented. (orig.).

  14. Observer differentiation of proximal enamel mechanical defects versus natural proximal dental caries with computed dental radiography.

    Science.gov (United States)

    Kang, B C; Farman, A G; Scarfe, W C; Goldsmith, L J

    1996-10-01

    Various models have been used to study the accuracy of imaging systems for detection of dental caries. This study compares the ability of dentists to detect mechanically created defects versus natural dental caries cavitations on the proximal surfaces of extracted teeth with Computed Dental Radiography (Schick Industries, Long Island City, N.Y.). Detection rates are investigated according to lesion depth to permit comparisons to be made between studies in the literature with other mechanical defects or natural caries models. Discrimination of natural caries versus artificial defects with Computed Dental Radiography is also compared with a previous report that used standard dental film. Fifty-two extracted molar and premolar teeth were mounted into representative sets of maxillary and mandibular posterior arches for bite-wing radiography. There were 16 proximal surfaces with natural caries and 28 proximal surfaces with mechanical defects. An optical bench was used to ensure constant beam geometry. A 1.8 cm acrylic soft tissue equivalent attenuator was placed in front of the receptor. Thirty dentists acted independently as observers to differentiate between sound proximal tooth surfaces, natural dental caries, and mechanical defects. Evaluation of intra- and interobserver variability was made with use of the kappa statistic. The Zelen test of odds ratios was used to test for homogeneity, and the Mantel-Haenszel analysis plus stratified logistic regression were used for inference about the common odds ratio. Significance was set at p detection was 74% for mechanical defects and 67% for natural caries. The odds of detecting a mechanical defect were 1.40 times the odds of finding natural dental caries cavitation of the same depth. Lesion depth did influence the probability of correctly identifying the presence of a lesion; the odds of identifying cavitation increased 1.41 times with every 0.1 mm increase in lesion depth. Correct designation of lesion type was 1.42 times

  15. Selectivity of nanocavities and dislocations for gettering of Cu and Fe in silicon

    Science.gov (United States)

    Stritzker, B.; Petravic, M.; Wong-Leung, J.; Williams, J. S.

    2001-04-01

    The selectivity of interstitial-based extended defects (loops) and nanocavities for the gettering of Cu and Fe in Si has been studied. Controlled amounts of Cu and Fe were introduced by ion implantation into wafers containing pre-existing nanocavities and/or dislocations. Results show that Cu has a strong preference for gettering to open volume defects, even when high concentrations of interstitial-based loops are present in close proximity. However, the gettering of Fe in samples containing both vacancy- and interstitial-type defects is more complex, with Fe accumulation at all regions in the sample which contain defects, whether they are vacancy- or interstitial-like in character.

  16. Aging aspects of DEB getters

    Science.gov (United States)

    Dinh, L. N.; Cairns, G. A.; Krueger, R.; Mayer, B. P.; Maxwell, R. S.

    2013-11-01

    The changes in uptake capacity of 1,4-bis(phenylethynyl)benzene (DEB) blended with carbon-supported Pd (DEB-Pd/C) in the form of pellets as a function of temperature and time were investigated. Experimental results revealed a segregation and crystallization of DEB molecules toward the geometrical surfaces of the getter pellets, but very little or no diffusion-aggregation of Pd nano-catalysts even after long term storage at 75 °C in nitrogen. Despite the observation of surface segregation and crystallization of DEB molecules with increasing temperature and time, statistically there was no reduction in uptake capacity for the getter pellets stored at higher temperature. However, significant reversible reductions in uptake capacity was found among getter pellets exposed to air for extended time. The possible causes for these observations and their respective roles in the aging of getters are discussed. Surface segregation of the organic DEB. Agglomeration of palladium particles. Poisoning of the palladium catalyst. These phenomena were to be studied via accelerated aging of DEB blended with carbon-supported Pd (DEB-Pd/C) in the form of pellets and was carried out by storing batches of getter pellets at different temperatures and under different storage conditions for extended time. Every few months, some pellets were removed from storage for observation and hydrogen uptake measurements. High resolution scanning electron microscopy (HRSEM) and transmission electron microscopy (TEM) techniques were used to probe for any sign of agglomeration of the Pd nano-catalysts in a possible diffusion-aggregation process resulting from higher temperature storage. The uptake capacities of getter pellets stored at room temperature in laboratory atmosphere for extended amounts of time were also compared with those which had undergone a short elevated heating under dynamic vacuum prior to uptake measurements. Finally, the potential causes for the differences in uptake capacities

  17. Gettering in ISX-B

    Energy Technology Data Exchange (ETDEWEB)

    Wooton, A.J.; Edmonds, P.H.; Isler, R.C.; Mioduszewski, P. (Oak Ridge National Lab., TN (USA). Fusion Energy Div.)

    Gettering is used in the ISX-B tokamak to reduce the impurity concentration. This paper documents the gettering process used, and compares the expected changes in recycling and radiation with those observed experimentally. The enlargement of the operating regime (1/q, anti nsub(e)R/Bsub(phi) space) is discussed. Finally, the effect on one of the objectives of the experimental program, that of obtaining high values of beta, is described.

  18. Trans-projected-range gettering of copper in high-energy ion-implanted silicon

    Science.gov (United States)

    Gueorguiev, Y. M.; Kögler, R.; Peeva, A.; Mücklich, A.; Panknin, D.; Yankov, R. A.; Skorupa, W.

    2000-12-01

    Strong gettering of Cu atoms beyond the projected ion range RP has been found in single-crystal Si implanted with P+ and As+ ions at MeV energies. We call this phenomenon the "trans-RP effect." The formation of a separate Cu gettering band below RP, as detected by secondary ion mass spectrometry, indicates the presence of a significant amount of defects therein. These defects have not been detected by transmission electron microscopy and we suggest that they are small interstitial clusters. The amount of Cu atoms gettered beyond RP is, particularly for the P implants, much greater than that in the gettering layer at RP, indicating that the gettering ability of the point defects beyond RP is higher than that of the extended defects at RP. A mechanism responsible for their formation and clustering in the trans-RP region is proposed, and an explanation is given of the differences in the results for the P and As implants.

  19. Improved Hydrogen Gas Getters for TRU Waste -- Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Mark Stone; Michael Benson; Christopher Orme; Thomas Luther; Eric Peterson

    2005-09-01

    air) for the duration of the tests. However, catalytic reaction of hydrogen with carbon triple or double bonds in the getter materials did not take place. Instead, catalytic recombination was the predominant gettering mechanism in both getter materials as evidenced by (1) consumption of oxygen in the belljars, (2) production of free water in the belljars, and (3) absence of chemical changes in both getter materials as shown by nuclear magnetic resonance spectra.

  20. Technetium and Iodine Getters to Improve Cast Stone Performance

    Energy Technology Data Exchange (ETDEWEB)

    Qafoku, Nikolla; Neeway, James J.; Lawter, Amanda R.; Levitskaia, Tatiana G.; Serne, R. Jeffrey; Westsik, Joseph H.; Snyder, Michelle MV

    2014-07-01

    using the 7.8 M Na LAW simulant (the simulant selected to represent LAW) for the first 15 days for four Tc getters (BFS1, BFS2, Sn(II)-treated apatite, and Sn(II) chloride) show no, to a very small, capacity to remove Tc from the LAW simulant. For the Tc-getter experiments in the 7.8 M LAW simulant, the majority of the effluent samples show very small drops in Tc concentrations for the 35-day compared to the 15-day samplings. However, the Tc concentration in the simulant blanks also dropped slightly during this period, so the effect of the getter contacting LAW simulant at 35 days compared to 15 days is minimal; except that the BFS1 1:10 test shows a slow but steady decrease in Tc concentration in the LAW simulant supernatant from the beginning to the 35 day contact at which point about 20% of the original Tc has been removed from solution. Lastly, the KMS getter gives the highest Kd value for Tc at 35 days where Kd values have increased to 104 mL/g. When considering the different I getters reacting with the 7.8 M LAW simulant, two getters are much more effective than the others: Ag zeolite and Syn Arg. The other getters have calculated iodide distribution coefficients that show very limited effectiveness in the caustic conditions created by the LAW simulant. These are preliminary results that will need more detailed analyses including both pre- and post-batch sorption getter solid-phase characterization using state-of-the-art instrumentation such as synchrotron X ray absorption spectroscopy, which can delineate the oxidation state of the Tc and likely iodine species as well as some of the getters key major components, sulfur and iron in the BFS, and tin and sulfur in the tin-bearing and sulfur-bearing getters. This report also describes future experimental studies to be performed to better elucidate the mechanisms controlling the Tc and I sequestration processes in the various getters and leach tests of getter-bearing Cast Stone monoliths.

  1. Technetium and Iodine Getters to Improve Cast Stone Performance

    Energy Technology Data Exchange (ETDEWEB)

    Qafoku, Nikolla [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Neeway, James J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lawter, Amanda R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Levitskaia, Tatiana G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Serne, R. Jeffrey [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Westsik, Joseph H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Snyder, Michelle MV [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-02-19

    measured from experiments conducted using the 7.8 M Na LAW simulant (the simulant selected to represent LAW) for the first 15 days for four Tc getters (BFS1, BFS2, Sn(II)-treated apatite, and Sn(II) chloride) show no, to a very small, capacity to remove Tc from the LAW simulant. For the Tc-getter experiments in the 7.8 M LAW simulant, the majority of the effluent samples show very small drops in Tc concentrations for the 35-day compared to the 15-day samplings. However, the Tc concentration in the simulant blanks also dropped slightly during this period, so the effect of the getter contacting LAW simulant at 35 days compared to 15 days is minimal; except that the BFS1 1:10 test shows a slow but steady decrease in Tc concentration in the LAW simulant supernatant from the beginning to the 35 day contact at which point about 20% of the original Tc has been removed from solution. Lastly, the KMS getter gives the highest Kd value for Tc at 35 days where Kd values have increased to 104 mL/g. When considering the different I getters reacting with the 7.8 M LAW simulant, two getters are much more effective than the others: Ag zeolite and Syn Arg. The other getters have calculated iodide distribution coefficients that show very limited effectiveness in the caustic conditions created by the LAW simulant. These are preliminary results that will need more detailed analyses including both pre- and post-batch sorption getter solid-phase characterization using state-of-the-art instrumentation such as synchrotron X-ray absorption spectroscopy, which can delineate the oxidation state of the Tc and likely iodine species as well as some of the getters key major components, sulfur and iron in the BFS, and tin and sulfur in the tin-bearing and sulfur-bearing getters. This report also describes future experimental studies to be performed to better elucidate the mechanisms controlling the Tc and I sequestration processes in the various getters and leach tests of getter

  2. Aluminum gettering in single and multicrystalline silicon

    Energy Technology Data Exchange (ETDEWEB)

    McHugo, S.A.; Hieslmair, H.; Weber, E.R. [Univ. of California, Berkeley, CA (United States)

    1995-08-01

    Al gettering has been performed on integrated circuit (I.C.) quality silicon and a variety of single and multicrystalline silicon solar cell materials. The minority carrier diffusion length, Ln, has been used to quantify the gettering response. Vast differences in response to the Al gettering treatment are observed between the I.C. quality silicon and the solar cell materials. The I.C. silicon generally responds well while the solar cell silicon performance progressively degrades with increasing gettering temperature. Preliminary data shows that by performing a Rapid Thermal Annealing treatment prior to the Al gettering, an improved or further degraded Ln emerges in solar cell material depending on the material`s manufacturer. We explain these observed phenomena by suggesting that Al gettering in solar cell silicon is an impurity emission-limited process while for I.C. quality silicon it is diffusion limited.

  3. Method for charging a hydrogen getter

    Energy Technology Data Exchange (ETDEWEB)

    Tracy, C. Edwin (Golden, CO); Keyser, Matthew A. (Westminster, CO); Benson, David K. (Golden, CO)

    1998-01-01

    A method for charging a sample of either a permanent or reversible getter material with a high concentration of hydrogen while maintaining a base pressure below 10.sup.-4 torr at room temperature involves placing the sample of hydrogen getter material in a chamber, activating the sample of hydrogen getter material, overcharging the sample of getter material through conventional charging techniques to a high concentration of hydrogen, and then subjecting the sample of getter material to a low temperature vacuum bake-out process. Application of the method results in a reversible hydrogen getter which is highly charged to maximum capacities of hydrogen and which concurrently exhibits minimum hydrogen vapor pressures at room temperatures.

  4. Method for charging a hydrogen getter

    Science.gov (United States)

    Tracy, C.E.; Keyser, M.A.; Benson, D.K.

    1998-09-15

    A method for charging a sample of either a permanent or reversible getter material with a high concentration of hydrogen while maintaining a base pressure below 10{sup {minus}4} torr at room temperature involves placing the sample of hydrogen getter material in a chamber, activating the sample of hydrogen getter material, overcharging the sample of getter material through conventional charging techniques to a high concentration of hydrogen, and then subjecting the sample of getter material to a low temperature vacuum bake-out process. Application of the method results in a reversible hydrogen getter which is highly charged to maximum capacities of hydrogen and which concurrently exhibits minimum hydrogen vapor pressures at room temperatures. 9 figs.

  5. Kinetics and thermodynamics constraints in Pt gettering by P diffusion in Si

    Science.gov (United States)

    Coffa, S.; Franco, G.; Camalleri, C. M.; Giraffa, A.

    1996-07-01

    We have explored the mechanisms underlying the gettering of Pt atoms dissolved in crystalline Si. By using Pt implantation at different fluences followed by a thermal process at 970 °C for 5 h we were able to prepare crystalline silicon wafers containing a uniform Pt concentration in the range 2×1012-2×1014 atoms/cm3. Subsequently, a heavily doped n-type region was produced on one side of the wafer by P diffusion at 900 °C. Following this deposition process we have studied the kinetics of Pt gettering to the P-doped region in the temperature range 700-970 °C and for annealing times ranging from 30 min to 48 h. Lifetime measurements by means of a contactless technique were used to detect the depletion of Pt in the bulk of the wafer due to the gettering process. The large range of initial Pt concentrations that we have explored allowed us to identify and separate the kinetics and thermodynamics constraints that determine the gettering efficiency and to propose a phenomenological model for the gettering of Pt. In particular, it has been found that the kinetics of the gettering process are driven by the dissolution of immobile substitutional Pt atoms into interstitial sites. This process is assisted by Si self-interstitials and characterized by an activation energy of 0.4 eV. Moreover, the equilibrium distribution of Pt is thermodynamically determined by a segregation coefficient of the Pt atoms between the gettering sites and the silicon matrix. This segregation coefficient, and hence the gettering efficiency, decrease when the temperature of the gettering process is increased and is described by an activation energy of 2.5 eV.

  6. Improvement in GAAS device yield and performance through substrate defect gettering

    Science.gov (United States)

    Magee, T. J.; Peng, J.; Ormond, R.; Armistead, R. A.; Malbon, M.; Evans, C. A., Jr.

    1980-06-01

    The use of mechanically produced, back surface damage as a means of gettering impurities and defects in GaAs wafers has been investigated. Comparative analyses have been done on both ion implantation and mechanical back surface damage gettering techniques. The increased thermal stability of mechanically produced damage has shown ion implantation techniques to be less effective for gettering over long anneal periods at elevated temperatures. Stress gradients produced by graded dislocation distributions produce reductions in front surface defect concentrations and effective gettering of Au and Cr at the back surfaces. Thermal stability times of back surface damage at anneal temperatures of 700-800 C is typically on the order of 2 - 3 hours, corresponding to the point at which major back surface microstructural damage is largely annealed. Increases in the thermal stability period were attained by encapsulating the back surface with an As-doped SiO2 layer. Gettering of Cr by back surface damage was also investigated at low temperatures (300 C - 400 C) for anneal periods of 10 - 300 hrs. Measurable concentrations of Cr were detected with the process characterized by an activation energy of approximately 0.88 eV and a time dependent term, exp (theta square root of t). Using the developed gettering procedures, FET structures were fabricated on VPE layers on pregettered GaAs wafers. Dramatic improvements in yield per wafer, noise figures at higher frequencies and input capacitance values were obtained on "inscreened" wafers processed through a normal fabrication line.

  7. Diffusive Barrier and Getter Under Waste Packages VA Reference Design Feature Evaluations

    Energy Technology Data Exchange (ETDEWEB)

    MacNeil, K.

    1999-05-24

    This technical document evaluates those aspects of the diffusive barrier and getter features which have the potential for enhancing the performance of the Viability Assessment Reference Design and are also directly related to the key attributes for the repository safety strategy of that design. The effects of advection, hydrodynamic dispersion, and diffusion on the radionuclide migration rates through the diffusive barrier were determined through the application of the one-dimensional, advection/dispersion/diffusion equation. The results showed that because advective flow described by the advection-dispersion equation dominates, the diffusive barrier feature alone would not be effective in retarding migration of radiocuclides. However, if the diffusive barrier were combined with one or more features that reduced the potential for advection, then transport of radionuclides would be dominated by diffusion and their migration from the EBS would be impeded. Apatite was chosen as the getter material used for this report. Two getter configurations were developed, Case 1 and Case 2. As in the evaluation of the diffusive barrier, the effects of advection, hydrodynamic dispersion, and diffusion on the migration of radionuclides through the getter are evaluated. However, in addition to these mechanisms, the one-dimensional advection/dispersion/diffusion model is modified to include the effect of sorption on radionuclide migration rates through the sorptive medium (getter). As a result of sorption, the longitudinal dispersion coefficient, and the average linear velocity are effectively reduced by the retardation factor. The retardation factor is a function of the getter material's dry bulk density, sorption coefficient and moisture content. The results of the evaluation showed that a significant delay in breakthrough through the getter can be achieved if the thickness of the getter barrier is increased.

  8. Pseudoarthrosis following proximal humeral fractures: A possible mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Rooney, P.J.; Cockshott, W.P.

    1986-01-01

    A small series of four patients with pseudarthrosis of the proximal humeral shaft is reported. These patients all had restricted movement of the shoulder joint prior to the trauma, three as a result of rheumatoid arthritis and one due a surgical fusion of the glenohumeral joint. It is suggested that pseudarthrosis is more likely under these circumstances and that pursuit of union of the fracture in such patients may not always be necessary.

  9. Design optimization of metal getter reactors for removing tritium from flowing gas streams

    Energy Technology Data Exchange (ETDEWEB)

    Nobile, A.; Bieniewski, T.; Frame, K.; Little, R.; Fisher, K. [Los Alamos National Lab., NM (United States)

    1995-10-01

    A reaction engineering approach was used to design a SAES St 198 metal getter reactor for a glovebox detritiation system. The detritiation system will be used to decontaminate and decommission an Li(D, T)-contaminated glovebox previously used in the U.S. nuclear weapons program. The approach involved development of a model that calculates reactor breakthrough curves as a function of various reactor physical parameters. Experiments involving flow of deuterium in nitrogen through a small metal getter reactor validated the model. The model was then used to investigate the effects of temperature, getter pellet size, reactor diameter, and reactor volume on the reactor performance. The resulting design was a 7 cm diam. by 40 cm long cylindrical reactor that operates at 250 {degree}C, and is filled with 5 kg of as-received SAES St 198 getter pellets. The reactor handles a flow rate of 100 L/min. An St 909 getter reactor was used upstream of the St 198 reactor for impurity removal and water decomposition. The glovebox cleanup system design and getter reactor mechanical design are discussed. 14 refs., 6 figs.

  10. On getter action of tungsten for methane

    Energy Technology Data Exchange (ETDEWEB)

    Kyoh, Bunkei; Uchida, Kumao (Kinki Univ., Higashi-Osaka, Osaka (Japan). Faculty of Science and Technology); Imoto, Shosuke

    1990-07-01

    The tungsten filament was electrically heated in methane atmosphere, and its getter action for methane has been investigated. The rapid adsorption of methane occurred during gettering at methane pressures between 10{sup -3} and 10{sup -5} Pa. When compared to the absorbed amount at higher temperature (above 200degC) was about 1/10 smaller than at room temperature. Desorption of methane from W getter film was hardly observed, but hydrogen was desorbed and the amount increased with temperature. About 16% carbon was found in the W film after gettering, of which the crystal structure differed according to the substrate ({beta}-W on glass sub., {alpha}-W on W sub.). (author).

  11. Getter Jaani osaleb nukuteatri muusikalis / Karilin Engelbrecht

    Index Scriptorium Estoniae

    Engelbrecht, Karilin

    2009-01-01

    2010. aasta kevadel jõuab nukuteatri lavale Walt Disney menufilmi "High School Musical" samanimeline muusikal kohalike lauljate esituses. Tüdrukutest peetakse suurimaks favoriidiks Getter Jaanit. Muusikali lavastab Andres Dvinjaninov

  12. Test Plan for Composite Hydrogen Getter Materials

    Energy Technology Data Exchange (ETDEWEB)

    Livingston, R.R.

    2000-11-09

    The intent of this test plan is to provide details of the Savannah River Technology Center (SRTC) effort to evaluate composite getter materials for eventual use in expanding the wattage limits for transportation of contact-handled transuranic waste (CH-TRU). This effort is funded by the Mixed Waste Focus Area (MWFA) under Technical Task Plan (TTP) SR-1-9-MW-45 and is the result of a competitive process initiated by a MWFA request for proposals. In response to this request, SRTC presented data on several composite getter materials that demonstrated good potential for application in transportation of transuranic wastes. The tests outlined in the SRTC proposal for composite getter materials should demonstrate compliance with functional requirements provided by the MWFA in a Statement of Work (SOW) which accompanied the request for proposals. Completion of Phase 1 testing, as defined in the TTP, should provide sufficient data to determine if composite getters should progress to Phase s 2 and 3. These test results will provide support for future safety reviews as part of the Transuranic Package Transporter-II (TRUPACT-II) certification process to utilize getter technology. This test plan provides details of the test descriptions, test objectives, required measurements, data quality objectives, data analysis, and schedule information relevant to Phase 1 of the TTP. The results of these tests are expected to help identify any potential weaknesses in the use of composite getter for transportation of CH-TRU wastes. Where a potential weakness is identified, this will be addressed as part of Phase 2 of the proposed effort. It is also important to recognize that these tests are focused on the individual composite getter materials and not the engineered system that would eventually be used in a TRUPACT-II. However, these test results will be very helpful in establishing the requirements for the design of a TRUPACT-II getter system that is included as part of the propo sed Phase

  13. Internal gettering by metal alloy clusters

    Science.gov (United States)

    Buonassisi, Anthony; Heuer, Matthias; Istratov, Andrei A.; Pickett, Matthew D.; Marcus, Mathew A.; Weber, Eicke R.

    2010-07-27

    The present invention relates to the internal gettering of impurities in semiconductors by metal alloy clusters. In particular, intermetallic clusters are formed within silicon, such clusters containing two or more transition metal species. Such clusters have melting temperatures below that of the host material and are shown to be particularly effective in gettering impurities within the silicon and collecting them into isolated, less harmful locations. Novel compositions for some of the metal alloy clusters are also described.

  14. Toward understanding and modeling of impurity gettering in silicon

    Energy Technology Data Exchange (ETDEWEB)

    Tan, Teh Y.; Gafiteanu, R.; Goesele, U.M. [Duke Univ., Durham, NC (United States)

    1995-08-01

    Gettering of harmful impurities away from the device active regions has already become an integral part of manufacturing integrated circuits (IC) using Czochralski (CZ) Si wafers, and is experiencing an increasing importance in Si solar cell fabrications for improving the cell efficiency. Gettering consists of (1) the creation of suitable gettering sites; and (2) the gettering processes of contaminants. Requirements for successful gettering differ between the IC and solar cell cases, because ICs are monolithic devices situated at the Si wafer surfaces while solar cells are bulk devices, and because the Si substrate materials used are different. For IC fabrications, the method used is that of intrinsic or internal gettering (IG) which utilizes oxygen precipitates and their associated defects in the CZ Si wafer bulk as gettering sites. Because of the bulk nature of IG sites, the scheme cannot be used also for solar cells. Only some kind of extrinsic or external gettering (EG) schemes with gettering sites located at the wafer surface regions can be used for solar cells. The gettering of the harmful contaminants, usually metals, to the gettering region involves the metal dissolution from precipitated state, the metal atom diffusion to and the stabilization at the gettering sites. A mathematical model of the gettering process is presented.

  15. Method of capturing or trapping zinc using zinc getter materials

    Energy Technology Data Exchange (ETDEWEB)

    Hunyadi Murph, Simona E.; Korinko, Paul S.

    2017-07-11

    A method of trapping or capturing zinc is disclosed. In particular, the method comprises a step of contacting a zinc vapor with a zinc getter material. The zinc getter material comprises nanoparticles and a metal substrate.

  16. The mechanical benefit of medial support screws in locking plating of proximal humerus fractures.

    Science.gov (United States)

    Zhang, Wen; Zeng, Langqing; Liu, Yanjie; Pan, Yao; Zhang, Wei; Zhang, Changqing; Zeng, Bingfang; Chen, Yunfeng

    2014-01-01

    The purpose of this study was to evaluate the biomechanical advantages of medial support screws (MSSs) in the locking proximal humeral plate for treating proximal humerus fractures. Thirty synthetic left humeri were randomly divided into 3 subgroups to establish two-part surgical neck fracture models of proximal humerus. All fractures were fixed with a locking proximal humerus plate. Group A was fixed with medial cortical support and no MSSs; Group B was fixed with 3 MSSs but without medial cortical support; Group C was fixed with neither medial cortical support nor MSSs. Axial compression, torsional stiffness, shear stiffness, and failure tests were performed. Constructs with medial support from cortical bone showed statistically higher axial and shear stiffness than other subgroups examined (Pproximal humerus was not supported by medial cortical bone, locking plating with medial support screws exhibited higher axial and torsional stiffness than locking plating without medial support screws (P ≤ 0.0207). Specimens with medial cortical bone failed primarily by fracture of the humeral shaft or humeral head. Specimens without medial cortical bone support failed primarily by significant plate bending at the fracture site followed by humeral head collapse or humeral head fracture. Anatomic reduction with medial cortical support was the stiffest construct after a simulated two-part fracture. Significant biomechanical benefits of MSSs in locking plating of proximal humerus fractures were identified. The reconstruction of the medial column support for proximal humerus fractures helps to enhance mechanical stability of the humeral head and prevent implant failure.

  17. Hydrogen Uptake of DPB Getter Pellets

    Energy Technology Data Exchange (ETDEWEB)

    Dinh, L N; Schildbach, M A; Herberg, J L; Saab, A P; Weigle, J; Chinn, S C; Maxwell, R S; McLean II, W

    2008-05-30

    The physical and chemical properties of 1,4-diphenylbutadiyne (DPB) blended with carbon-supported Pd (DPB-Pd/C) in the form of pellets during hydrogenation were investigated. A thermogravimetric analyzer (TGA) was employed to measure the kinetics of the hydrogen uptake by the DPB getter pellets. The kinetics obtained were then used to develop a semi-empirical model, based on gas diffusion into solids, to predict the performance of the getter pellets under various conditions. The accuracy of the prediction model was established by comparing the prediction models with independent experimental data on hydrogen pressure buildup in sealed systems containing DPB getter pellets and subjected to known rates of hydrogen input. The volatility of the hydrogenated DPB products and its effects on the hydrogen uptake kinetics were also analyzed.

  18. Defects and gettering of impurities in silicon

    Science.gov (United States)

    Plekhanov, Pavel Sergeyevich

    2000-10-01

    Processes of formation of extended defects in silicon and the role of impurities in them, as well as the gettering of impurities from precipitated state, the electrical activity of impurity precipitates and their impact on performance of solar cells are considered in the thesis. The nucleation and growth of voids and vacancy-type dislocation loops during Si crystal growth under Si vacancy supersaturation conditions have been numerically modeled. The two processes are treated in conjunction with each other. Based on the competition between them, the Si vacancy formation enthalpy range and the void nucleation temperature are determined. The role of oxygen in the formation of voids in Si has been considered, and the mathematical description of the process has been formulated. It is shown that experimentally observed composite void-oxide defects are likely to nucleate first as simple oxide precipitates and later to develop into voids with their surfaces covered by the oxide layer. Physical and numerical modeling of impurity gettering from multicrystalline Si for solar cell fabrication has been carried out using Fe as a model impurity. A variable temperature gettering process is modeled and predicted to provide high gettering efficiency and short gettering times. A quantitative model of the electrical activity of metallic precipitates in Si has been developed. An emphasis is made on the properties of the Schottky junction at the precipitate-Si interface as well as the carrier diffusion and drift in the Si space charge region. Carrier recombination rate is found to be primarily determined by the thermionic emission charge transport process across the Schottky junction rather than the surface recombination process. It is shown that the precipitates can have a very large minority carrier capture cross-section. The above-mentioned model of the process of impurity gettering from Si by an Al layer has been combined with a solar cell device model. This provides a way of

  19. slice of LEP beamtube with getter strip

    CERN Multimedia

    1989-01-01

    A section of the LEP beam pipe. This is the chamber in which LEP's counter-rotating electron and positron beams travel. It is made of lead-clad aluminium. The beams circulate in the oval cross-section part of the chamber. In the rectangular cross-section part, LEP's innovative getter-strip vacuum pump is installed. After heating to purify the surface of the getter, the strip acts like molecular sticky tape, trapping any stray molecules left behind after the accelerator's traditional vacuum pumps have done their job.

  20. Hydrogen and moisture getter and absorber for sealed devices

    Science.gov (United States)

    Smith, H.M.; Schicker, J.R.

    1999-03-30

    The present invention is a hydrogen getter and method for formulating and using the getter. This getter effectively removes hydrogen gas typically present in many hermetically-sealed electronic applications where the presence of such gas would otherwise be harmful to the electronics. The getter is a non-organic composition, usable in a wide range of temperatures as compared to organic getters. Moreover, the getter is formulated to be used without the need for the presence of oxygen. The getter is comprised of effective amounts of an oxide of a platinum group metal, a desiccant, and a gas permeable binder which preferably is cured after composition in an oxygen-bearing environment at about 150 to about 205 degrees centigrade.

  1. The mechanical benefit of medial support screws in locking plating of proximal humerus fractures.

    Directory of Open Access Journals (Sweden)

    Wen Zhang

    Full Text Available BACKGROUND: The purpose of this study was to evaluate the biomechanical advantages of medial support screws (MSSs in the locking proximal humeral plate for treating proximal humerus fractures. METHODS: Thirty synthetic left humeri were randomly divided into 3 subgroups to establish two-part surgical neck fracture models of proximal humerus. All fractures were fixed with a locking proximal humerus plate. Group A was fixed with medial cortical support and no MSSs; Group B was fixed with 3 MSSs but without medial cortical support; Group C was fixed with neither medial cortical support nor MSSs. Axial compression, torsional stiffness, shear stiffness, and failure tests were performed. RESULTS: Constructs with medial support from cortical bone showed statistically higher axial and shear stiffness than other subgroups examined (P<0.0001. When the proximal humerus was not supported by medial cortical bone, locking plating with medial support screws exhibited higher axial and torsional stiffness than locking plating without medial support screws (P ≤ 0.0207. Specimens with medial cortical bone failed primarily by fracture of the humeral shaft or humeral head. Specimens without medial cortical bone support failed primarily by significant plate bending at the fracture site followed by humeral head collapse or humeral head fracture. CONCLUSIONS: Anatomic reduction with medial cortical support was the stiffest construct after a simulated two-part fracture. Significant biomechanical benefits of MSSs in locking plating of proximal humerus fractures were identified. The reconstruction of the medial column support for proximal humerus fractures helps to enhance mechanical stability of the humeral head and prevent implant failure.

  2. Is a Go-Getter Better Off?

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 15; Issue 1. Is a Go-Getter Better Off? V R Padmawar. General Article Volume 15 Issue 1 January 2010 pp 32-44. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/015/01/0032-0044. Keywords. Fair coin ...

  3. Engineering Report on the Fission Gas Getter Concept

    Energy Technology Data Exchange (ETDEWEB)

    Ecker, Lynne; Ghose, Sanjit; Gill, Simerjeet; Thallapally, Praveen K.; Strachan, Denis M.

    2012-11-01

    In 2010, the Department of Energy (DOE) requested that a Brookhaven National Laboratory (BNL)-led team research the possibility of using a getter material to reduce the pressure in the plenum region of a light water reactor fuel rod. During the first two years of the project, several candidate materials were identified and tested using a variety of experimental techniques, most with xenon as a simulant for fission products. Earlier promising results for candidate getter materials were found to be incorrect, caused by poor experimental techniques. In May 2012, it had become clear that none of the initial materials had demonstrated the ability to adsorb xenon in the quantities and under the conditions needed. Moreover, the proposed corrective action plan could not meet the schedule needed by the project manager. BNL initiated an internal project review which examined three questions: 1. Which materials, based on accepted materials models, might be capable of absorbing xenon? 2. Which experimental techniques are capable of not only detecting if xenon has been absorbed but also determine by what mechanism and the resulting molecular structure? 3. Are the results from the previous techniques useable now and in the future? As part of the second question, the project review team evaluated the previous experimental technique to determine why incorrect results were reported in early 2012. This engineering report is a summary of the current status of the project review, description of newly recommended experiments and results from feasibility studies at the National Synchrotron Light Source (NSLS).

  4. One-Time URL: A Proximity Security Mechanism between Internet of Things and Mobile Devices.

    Science.gov (United States)

    Solano, Antonio; Dormido, Raquel; Duro, Natividad; González, Víctor

    2016-10-13

    The aim of this paper is to determine the physical proximity of connected things when they are accessed from a smartphone. Links between connected things and mobile communication devices are temporarily created by means of dynamic URLs (uniform resource locators) which may be easily discovered with pervasive short-range radio frequency technologies available on smartphones. In addition, a multi cross domain silent logging mechanism to allow people to interact with their surrounding connected things from their mobile communication devices is presented. The proposed mechanisms are based in web standards technologies, evolving our social network of Internet of Things towards the so-called Web of Things.

  5. One-Time URL: A Proximity Security Mechanism between Internet of Things and Mobile Devices

    Directory of Open Access Journals (Sweden)

    Antonio Solano

    2016-10-01

    Full Text Available The aim of this paper is to determine the physical proximity of connected things when they are accessed from a smartphone. Links between connected things and mobile communication devices are temporarily created by means of dynamic URLs (uniform resource locators which may be easily discovered with pervasive short-range radio frequency technologies available on smartphones. In addition, a multi cross domain silent logging mechanism to allow people to interact with their surrounding connected things from their mobile communication devices is presented. The proposed mechanisms are based in web standards technologies, evolving our social network of Internet of Things towards the so-called Web of Things.

  6. Novel Functionalized Ceramic Getter Materials for Adsorption of Radioiodine

    Energy Technology Data Exchange (ETDEWEB)

    Mattigod, Shas V.; Fryxell, Glen E.; Parker, Kent E.; Kaplan, Daniel I.

    2003-08-02

    A new class of getter materials has been synthesized for immobilization of long-lived radionuclides such as 129I. These novel materials consist of nanoporous ceramic substrates with tailored pore sizes ranging from 2 – 20 nm. These high surface area (~1000 m2/g) ceramic substrates have been functionalized with self-assembled monolayers consisting of soft cation-capped thiol-functionality. The resulting getter materials exhibit highly dense binding sites, and excellent selectivity for iodide. The effectiveness of these novel getter materials was evaluated using radioiodide-spiked samples of surface water and concrete leachate and adsorption performance was compared with natural sulfide mineral getter materials. The data indicated that the novel getter materials have very high affinity for radioiodide (Kd: 4 x 104 – 3 x 105 ml/g and 6 x 105 ml/g in surface and concrete leachate respectively). Comparatively, the radioiodide Kd values for natural mineral getters were typically two to three orders magnitude less than the novel getters. The results indicated that the synthetic getter materials have the potential to immobilize and therefore retard the migration of 129I in the subsurface environment. Additional studies are being conducted to evaluate the long-term stability of these materials in waste disposal environments.

  7. Adaptive memory: determining the proximate mechanisms responsible for the memorial advantages of survival processing.

    Science.gov (United States)

    Burns, Daniel J; Burns, Sarah A; Hwang, Ana J

    2011-01-01

    J. S. Nairne, S. R. Thompson, and J. N. S. Pandeirada (2007) suggested that our memory systems may have evolved to help us remember fitness-relevant information and showed that retention of words rated for their relevance to survival is superior to that of words encoded under other deep processing conditions. The authors present 4 experiments that uncover the proximate mechanisms likely responsible. The authors obtained a recall advantage for survival processing compared with conditions that promoted only item-specific processing or only relational processing. This effect was eliminated when control conditions encouraged both item-specific and relational processing. Data from separate measures of item-specific and relational processing generally were consistent with the view that the memorial advantage for survival processing results from the encoding of both types of processing. Although the present study suggests the proximate mechanisms for the effect, the authors argue that survival processing may be fundamentally different from other memory phenomena for which item-specific and relational processing differences have been implicated. (PsycINFO Database Record (c) 2010 APA, all rights reserved).

  8. High-energy ion-implantation-induced gettering of copper in silicon beyond the projected ion range: The trans-projected-range effect

    Science.gov (United States)

    Gueorguiev, Y. M.; Kögler, R.; Peeva, A.; Mücklich, A.; Panknin, D.; Yankov, R. A.; Skorupa, W.

    2000-11-01

    Five different species, namely B, Si, P, Ge, and As, were implanted at MeV energies into (100)-oriented n-type Czohralski Si, in order to form deep gettering layers during the subsequent annealing. Then the samples were contaminated with Cu by implanting the impurity on the backface and performing additional annealing. The resulting Cu depth distributions were measured by secondary ion mass spectrometry. Strong gettering of Cu atoms beyond the projected ion range RP and formation of a well-defined separate Cu gettering band therein is found for P and As implants. We call this phenomenon the "trans-RP effect." It arises from the presence of a significant amount of defects in the regions much deeper than RP. Their gettering ability is higher than that of the extended defects around RP, as the amount of Cu atoms gettered beyond RP is, especially for the P implants, much greater than that in the implanted gettering layer at RP. These deep defects have not been detected by transmission electron microscopy, and we suggest that they are small interstitial clusters. A mechanism responsible for the migration of self-interstitials from RP into the trans-RP region and their clustering therein is proposed. An explanation is given of the possible reasons for the differences in the results for the P+ and As+ implants.

  9. Getter Incorporation into Cast Stone and Solid State Characterizations

    Energy Technology Data Exchange (ETDEWEB)

    Asmussen, Robert M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lawter, Amanda R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stephenson, John R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bowden, Mark E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Washton, Nancy M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Neeway, James J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Du, Yingge [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Pearce, Carolyn I. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Clayton, Ray E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Saslow, Sarah A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Buck, Edgar C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Cordova, Elsa [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Qafoku, Nikolla [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-09-28

    Washington River Protection Solutions (WRPS) is collecting relevant available data on waste forms for use as a supplemental immobilization technology, to provide the additional capacity needed to treat low-activity waste (LAW) in Hanford Site tanks and complete the tank waste cleanup mission in a timely and cost-effective manner. One candidate supplemental waste form, fabricated using a low-temperature process, is a cementitious grout called Cast Stone. Cast Stone has been under investigation for this application at Pacific Northwest National Laboratory (PNNL) since initial screening tests in FY13. This report is the culmination of work to lower the diffusivities of Tc and I from Cast Stone using getters. Getters are compounds added to a system designed to selectively sequester a species of interest to provide increased stability to the species. The work contained within this report is related to waste form development and testing, and does not directly support the 2017 integrated disposal facility (IDF) performance assessment. However, this work contains valuable information which may be used in performance assessment maintenance past FY17, and in future waste form development. This report on performance characterization of Tc and I getters in Cast Stone fabricated with simulated LAW covers several areas of interest and major findings to WRPS: investigating performance of potassium metal sulfide (KMS-2-SS) and tin (II) apatite (Sn-A) as Tc getters when incorporated into Cast Stone; investigating performance of silver exchanged zeolite (Ag-Z) and argentite (Arg) as I getters when incorporated into Cast Stone; utilizing sequential addition of Tc and I getters to overcome any deleterious interactions between the getters in solution; determining, for the first time, Tc distribution within the cured Cast Stone and its evolution during leaching; and performing solid state characterization of getters and Cast Stone samples to support leach test findings and develop a

  10. Thermochemical properties of the hydrogen getter DEB

    Energy Technology Data Exchange (ETDEWEB)

    Balooch, M.; LeMay, J.D. [Lawrence Livermore National Lab., CA (United States); Wang, W.-E. [Department of Nuclear Engineering, 4164 Etcheverry Hall, University of California, Berkeley, CA 94720-1730 (United States)

    1999-04-20

    Vapor pressures of the hydrogen getter 1,4 bis(phenylethynyl)benzene (DEB), together with two of its derivatives namely DEB mixed with carbon-supported Pd (DEB-Pd/C) and hydrogenated DEB-Pd/C, are measured from room temperature to the melting temperature (179 C). The corresponding thermodynamic information, such as the enthalpy of vaporization, boiling point, and the deviation from ideal solution behavior of DEB-Pd/C, has been derived from the vapor pressure-temperature relationships. In addition, the hydrogenation kinetics of DEB-Pd/C (powder form and rod-like) has also been investigated at a fixed pressure of 13.3 Pa (0.1 Torr) and at four temperatures, 21 C, 35 C, 45 C and 55 C. (orig.) 5 refs.

  11. Mechanical failures after fixation with proximal femoral nail and risk factors

    Directory of Open Access Journals (Sweden)

    Koyuncu S

    2015-12-01

    postoperative complications were seen in 27 patients (17.7%. A total of 14 patients (9.2% underwent a revision procedure for mechanical complications.Conclusion: The study results suggest that the quality of fracture reduction is an important factor that affects the revision rate and SWS score in patients with mechanical complications after osteosynthesis with PFN for trochanteric fractures. Keywords: trochanteric hip fracture, proximal femoral nail, fracture reduction, complications, risk factors, intramedullary nail

  12. Technetium Getters to Improve Cast Stone Performance

    Energy Technology Data Exchange (ETDEWEB)

    Neeway, James J.; Lawter, Amanda R.; Serne, R. Jeffrey; Asmussen, Robert M.; Qafoku, Nikolla

    2015-10-15

    The cementitious material known as Cast Stone has been selected as the preferred waste form for solidification of aqueous secondary liquid effluents from the Hanford Tank Waste Treatment and Immobilization Plant (WTP) process condensates and low-activity waste (LAW) melter off-gas caustic scrubber effluents. Cast Stone is also being evaluated as a supplemental immobilization technology to provide the necessary LAW treatment capacity to complete the Hanford tank waste cleanup mission in a timely and cost effective manner. Two radionuclides of particular concern in these waste streams are technetium-99 (99Tc) and iodine-129 (129I). These radioactive tank waste components contribute the most to the environmental impacts associated with the cleanup of the Hanford site. A recent environmental assessment of Cast Stone performance, which assumes a diffusion controlled release of contaminants from the waste form, calculates groundwater in excess of the allowable maximum permissible concentrations for both contaminants. There is, therefore, a need and an opportunity to improve the retention of both 99Tc and 129I in Cast Stone. One method to improve the performance of Cast Stone is through the addition of “getters” that selectively sequester Tc and I, therefore reducing their diffusion out of Cast Stone. In this paper, we present results of Tc and I removal from solution with various getters with batch sorption experiments conducted in deionized water (DIW) and a highly caustic 7.8 M Na Ave LAW simulant. In general, the data show that the selected getters are effective in DIW but their performance is comprised when experiments are performed with the 7.8 M Na Ave LAW simulant. Reasons for the mitigated performance in the LAW simulant may be due to competition with Cr present in the 7.8 M Na Ave LAW simulant and to a pH effect.

  13. Effet getter dans des plaquettes de silicium multicristallin par diffusion de phosphore

    Science.gov (United States)

    Perichaud, I.; Martinuzzi, S.

    1992-03-01

    The external gettering effect by phosphorus diffusion is used to improve the electrical properties of multicrystalline silicon wafers. After diffusion at 900 °C for 4 h it was found that the effective diffusion lengths L_n of minority carriers achieve or overpass the thickness of the wafers. After diffusion at 850 °C for 4 h the improvements are less marked and hydrogenation is needed to obtain the same increase of L_n. SIMS analysis indicates that the gettered impurities are essentially iron, copper and nickel. Some restricted regions of the wafers are only poorly improved. It was found after chemical etching that these regions contain a high density of subgrain boundaries. The mechanism of the gettering effect used in this work is proposed, taking in account dissolved impurities in the grains and impurities segregated by dislocations. The additivity of the hydrogenation effect might be understood by the neutralisation of the recombination centers related to oxygen atoms segregated by the dislocations. L'effet getter externe par diffusion de phosphore est utilisé pour améliorer les propriétés électriques de plaquettes de silicium multicristallin. Après 4h à 900°C les longueurs de diffusion des porteurs minoritaires atteignent ou dépassent l'épaisseur des plaquettes. Après 4h à 850°C, les augmentations sont moins spectaculaires et une hydrogénation du matériau est nécessaire pour obtenir un résultat comparable au précédent. Les analyses SIMS indiquent que les impuretés extraites sont surtout du fer, du cuivre et du nickel. Certaines régions du matériau, d'extension limitée, sont toutefois peu améliorées. Elles sont caractérisées par la présence d'un réseau très dense de sous-joints. Une interprétation du mécanisme de l'effet getter observé est proposée faisant intervenir les impuretés métalliques dissoutes et celles ségrégées par les dislocations. L'additivité de l'action de l'hydrogène s'expliquerait par la neutralisation

  14. Mechanisms of neutrophil transmigration across renal proximal tubular HK-2 cells

    NARCIS (Netherlands)

    Bijuklic, Klaudija; Sturn, Daniel H; Jennings, Paul; Kountchev, Jordan; Pfaller, Walter; Wiedermann, Christian J; Patsch, Josef R; Joannidis, Michael

    2006-01-01

    BACKGROUND: Adhesion of intratubular leukocytes to proximal tubules in biopsies of patients with rapidly progressive glomerulonephritis and the appearance of leukocytes in the urine in interstitial nephritis suggest interactions between leukocytes and tubular epithelia in renal diseases. The aim of

  15. A comparison of gettering in single- and multicrystalline silicon for solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Sopori, B.L. [National Renewable Energy Lab., Golden, CO (United States); Jastrzebski, L.; Tan, T.

    1996-05-01

    The differences in the impurity gettering between single and multicrystalline silicon are discussed. These differences arise from impurity-defect interactions that occur during thermal processing of multicrystalline material. A gettering model is proposed to explain the observed behaviour of gettering in multicrystalline cells.

  16. An issue paper on the use of hydrogen getters in transportation packaging

    Energy Technology Data Exchange (ETDEWEB)

    NIGREY,PAUL J.

    2000-02-01

    The accumulation of hydrogen is usually an undesirable occurrence because buildup in sealed systems pose explosion hazards under certain conditions. Hydrogen scavengers, or getters, can avert these problems by removing hydrogen from such environments. This paper provides a review of a number of reversible and irreversible getters that potentially could be used to reduce the buildup of hydrogen gas in containers for the transport of radioactive materials. In addition to describing getters that have already been used for such purposes, novel getters that might find application in future transport packages are also discussed. This paper also discusses getter material poisoning, the use of getters in packaging, the effects of radiation on getters, the compatibility of getters with packaging, design considerations, regulatory precedents, and makes general recommendations for the materials that have the greatest applicability in transport packaging. At this time, the Pacific Northwest National Laboratory composite getter, DEB [1,4-(phenylethylene)benzene] or similar polymer-based getters, and a manganese dioxide-based getter appear to be attractive candidates that should be further evaluated. These getters potentially can help prevent pressurization from radiolytic reactions in transportation packaging.

  17. Getters for improved technetium containment in cementitious waste forms.

    Science.gov (United States)

    Asmussen, R Matthew; Pearce, Carolyn I; Miller, Brian W; Lawter, Amanda R; Neeway, James J; Lukens, Wayne W; Bowden, Mark E; Miller, Micah A; Buck, Edgar C; Serne, R Jeffery; Qafoku, Nikolla P

    2018-01-05

    A cementitious waste form, Cast Stone, is a possible candidate technology for the immobilization of low activity nuclear waste (LAW) at the Hanford site. This work focuses on the addition of getter materials to Cast Stone that can sequester Tc from the LAW, and in turn, lower Tc release from the Cast Stone. Two getters which produce different products upon sequestering Tc from LAW were tested: Sn(II) apatite (Sn-A) that removes Tc as a Tc(IV)-oxide and potassium metal sulfide (KMS-2) that removes Tc as a Tc(IV)-sulfide species, allowing for a comparison of stability of the form of Tc upon entering the waste form. The Cast Stone with KMS-2 getter had the best performance with addition equivalent to ∼0.08wt% of the total waste form mass. The observed diffusion (Dobs) of Tc decreased from 4.6±0.2×10(-12)cm(2)/s for Cast Stone that did not contain a getter to 5.4±0.4×10(-13)cm(2)/s for KMS-2 containing Cast Stone. It was found that Tc-sulfide species are more stable against re-oxidation within getter containing Cast Stone compared with Tc-oxide and is the origin of the decrease in Tc Dobs when using the KMS-2. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Gettering of Co in Si by high-energy B ion-implantation and by p/p+ epitaxial Si

    Science.gov (United States)

    Benton, J. L.; Boone, T.; Jacobson, D. C.; Rafferty, C. S.

    2000-12-01

    Detection and gettering of Co contamination in processed Si is an important issue in integrated circuit fabrication. In this work, Co was intentionally introduced into Si by ion implantation, and its diffusion monitored by secondary ion mass spectroscopy. The surface layer recombination lifetime in p/p+ epitaxial Si is unaffected by the Co at doses of 1×1011cm-2 or 1×1012cm-2. In the case of 2.5 MeV, 4×1014B/cm2 ion implanted bulk Si, two mechanisms for Co redistribution during high temperature furnace, 900 °C, 30 min, processing are evident. First, regions of high boron concentration provide gettering sites for Co contamination. Second, the final distribution of Co in Si reflects ion-implantation induced defect evolution during annealing. Both mechanisms will operate during device processing and will control the effect of the metal on the electrical properties of the Si.

  19. Mechanism of cisplatin proximal tubule toxicity revealed by integrating transcriptomics, proteomics, metabolomics and biokinetics

    NARCIS (Netherlands)

    Wilmes, Anja; Bielow, Chris; Ranninger, Christina; Bellwon, Patricia; Aschauer, Lydia; Limonciel, Alice; Chassaigne, Hubert; Kristl, Theresa; Aiche, Stephan; Huber, Christian G; Guillou, Claude; Hewitt, Philipp; Leonard, Martin O; Dekant, Wolfgang; Bois, Frederic Y; Jennings, Paul

    2015-01-01

    Cisplatin is one of the most widely used chemotherapeutic agents for the treatment of solid tumours. The major dose-limiting factor is nephrotoxicity, in particular in the proximal tubule. Here, we use an integrated omics approach, including transcriptomics, proteomics and metabolomics coupled to

  20. Gettering improvements of minority-carrier lifetimesin solar grade silicon

    DEFF Research Database (Denmark)

    Osinniy, Viktor; Nylandsted Larsen, Arne; Dahl, Espen

    2012-01-01

    The minority-carrier lifetime in p-type solar-grade silicon (SoG-Si) produced by Elkem Solar was investigated after different types of heat treatment. Two groups of samples differing by the as-grown lifetimes were exposed to internal and phosphorus gettering using constant and variable temperature...... processes. Optimal heat-treatment parameters for each group of samples were then identified which improved the minority-carrier lifetimes to values higher than the minimum value needed for solar cells. Phosphorus gettering using a variable temperature process enhanced in particular the lifetime within each...

  1. CdTe substrate purification from impurities by gettering

    Science.gov (United States)

    Kosyachenko, Leonid A.; Zakharuk, Z. I.; Rarenko, A. I.; Nykonyuk, E. S.

    2001-02-01

    A possibility of CdTe substrate purification from impurities by structure-breakdown layer gettering, formed by laser irradiation, is considered. For profile calculation of diffusive distribution of point defects during heat treatment, and also substrate purification degree after heat treatment, a model, based on diffusion equation with consideration of impurity absorption by dislocations, is proposed. Impurity redistribution task in structure CdTe-CdHgTe during annealing is solved also. Investigations, carried out on specially prepared samples, confirmed CdTe purification effectiveness by gettering: impurity concentration decreased in 5 - 10 times.

  2. Intrinsic Gettering of Manganese Impurity in Silicon Substrate

    Science.gov (United States)

    Adegboyega, G. A.; Osasona, O.; Susi, E.

    1997-05-01

    Intrinsic gettering of manganese impurity atoms has been investigated in p-type silicon by means of resistivity and minority carrier lifetime measurements and infrared absorption spectroscopy. Manganese proved to be a donor impurity in p-Si and its presence led to a reduction by a factor of about 7 in the lifetime of minority carriers by formation of deep level traps. There is strong evidence that high temperature oxygen precipitation is enhanced by the presence of the Mn impurity in the substrate. The resulting oxygen precipitate provided an efficient gettering sink for the Mn impurity.

  3. Mechanism for repair of thymine dimers by photoexcitation of proximal 8-oxo-7,8-dihydroguanine.

    Science.gov (United States)

    Anusiewicz, Iwona; Świerszcz, Iwona; Skurski, Piotr; Simons, Jack

    2013-02-14

    A wide range of experimental data from earlier studies by other workers are combined with recent data from the Burrows group to interpret that group's thymine dimer (T = T) repair rate data for 8-oxo-7,8-dihydroguanine (OG)-containing DNA duplexes. The focus of this effort is to explain (i) how and why the repair rates vary as the sequence location and distance of the OG relative to the T═T is changed and (ii) why the spatial extent over which repair is observed is limited to OG-T═T distances of ~6 Å. It is proposed that, if the OG and T═T are within ~5-6 Å, a Coulomb potential moves the energy of the OG(+)···T═T(-) ion-pair state below the photoexcited OG*···T═T state, even in the absence of full solvent relaxation, thus enhancing forward electron transfer from OG* to T═T by allowing it to occur as a radiationless internal conversion process rather than by overcoming a solvation-related barrier. The rate of this forward electron transfer is estimated to be ~10% of the decay rate of the photoexcited OG*. For OG-to-T═T distances beyond 5-6 Å, electron transfer is still exothermic, but it must occur through solvent reorganization, overcoming an energy barrier, which presumably renders this rate too slow to be detected in the experiments under study here. Once an electron has been injected into the T═T, as many other workers have shown, the reaction proceeds through two low-energy barriers first connecting T═T(-) to an intermediate in which the C(5)-C(5') bond of the cyclobutane unit is cleaved, and onward to where the cyclobutane unit is fully broken and two intact thymine sites are established. Our ab initio data show that the energy landscape for these bond cleavages is altered very little by the presence of the proximal OG(+) cation, which therefore allows us to use data from the earlier studies to conclude that it takes ~100 ps for complete bond cleavage to occur. The experimentally determined overall T═T repair quantum yield of 1

  4. Intrinsic gettering of nickel impuriy deep levels in silicon substrate ...

    African Journals Online (AJOL)

    The intrinsic gettering of nickel impurity in p-type silicon substrate has been investigated. The density of electrically active nickel in intentionally contaminated silicon was determined before and after oxygen precipitation by means of resistivity measurements. These data, coupled with minority carrier lifetime and infrared ...

  5. Proximate mechanisms of male morph determination in the ant Cardiocondyla obscurior.

    Science.gov (United States)

    Schrempf, Alexandra; Heinze, Jürgen

    2006-01-01

    The ant genus Cardiocondyla is characterized by an extraordinary male polyphenism, with winged disperser males and wingless, territorial ergatoid males. Winged males are produced only after the colony has experienced stressful environmental conditions, e.g., a drastic temperature decrease. We investigated the proximate basis of male polyphenism and caste dimorphism in C. obscurior. The critical stage for both morph and caste determination is the end of the second of three instars. Larval development as well as duration of the pupal stage are extended both in winged males and winged females and winged reproductives need on average 8.8 days longer for the development from egg to adult than wingless ergatoid males and workers. Treatment of first and second instar larvae with methoprene, a juvenile hormone analogue, led to the expression of the winged morph, suggesting an important role of juvenile hormone in both sexes. Although queens are produced year-round in contrast to winged males, the proximate basis of variation in morphology is likely to be the same in both sexes. Whereas the larvae themselves appear to be insensitive to the environmental changes, behavioral observations revealed that workers react to stress by changing their behavior towards larvae and in this way trigger them to develop into winged males.

  6. Development of a balanced experimental-computational approach to understanding the mechanics of proximal femur fractures.

    Science.gov (United States)

    Helgason, B; Gilchrist, S; Ariza, O; Chak, J D; Zheng, G; Widmer, R P; Ferguson, S J; Guy, P; Cripton, P A

    2014-06-01

    The majority of people who sustain hip fractures after a fall to the side would not have been identified using current screening techniques such as areal bone mineral density. Identifying them, however, is essential so that appropriate pharmacological or lifestyle interventions can be implemented. A protocol, demonstrated on a single specimen, is introduced, comprising the following components; in vitro biofidelic drop tower testing of a proximal femur; high-speed image analysis through digital image correlation; detailed accounting of the energy present during the drop tower test; organ level finite element simulations of the drop tower test; micro level finite element simulations of critical volumes of interest in the trabecular bone. Fracture in the femoral specimen initiated in the superior part of the neck. Measured fracture load was 3760N, compared to 4871N predicted based on the finite element analysis. Digital image correlation showed compressive surface strains as high as 7.1% prior to fracture. Voxel level results were consistent with high-speed video data and helped identify hidden local structural weaknesses. We found using a drop tower test protocol that a femoral neck fracture can be created with a fall velocity and energy representative of a sideways fall from standing. Additionally, we found that the nested explicit finite element method used allowed us to identify local structural weaknesses associated with femur fracture initiation. Copyright © 2014 IPEM. Published by Elsevier Ltd. All rights reserved.

  7. Design and testing of an advanced portable tritium getter bed

    Energy Technology Data Exchange (ETDEWEB)

    Schrader, K.H.; Perujo, A. [European Commission, Ispra (Italy)

    1995-10-01

    This paper presents the design and first tests of a portable uranium getter bed where the drawbacks of the standard available transport getters have been either mitigated or eliminated. The heating of the bed is made internally, ie, heating the uranium by a close contact of the heater element with the material, therefore reducing the temperature of the wall that is shielded from the heat source. Keeping the wall relatively cold reduces the tritium losses by permeation and the heat load to the glovebox. With this design the maximum operating temperature of the external wall is {approx}= 373 K; this corresponds to a nominal reduction in permeation of four orders of magnitude. 2 refs., 4 figs.

  8. Boron gettering on cavities induced by helium implantation in Si

    Science.gov (United States)

    Roqueta, F.; Alquier, D.; Ventura, L.; Dubois, Ch.; Jérisian, R.

    2001-10-01

    In this paper, we shed light on the strong interaction between the cavity layer induced by helium implantation and boron. First of all, we evidence the impact of He gettering step on a boron-diffused profile. In order to study the boron-cavity interaction, we had used uniformly boron-doped wafers implanted with helium at high dose and anneal using usual furnace annealing (FA) as well as rapid thermal annealing. Then, to avoid any precipitation phenomena, conditions were chosen to not exceed the boron solid solubility value. Our experimental results exhibit a large trapping of boron within the cavity layer. This trapping occurs since the early stage of the annealing. These results enable us to have better understanding of this He gettering step as well as its interaction with boron atoms, which are of great interest for device.

  9. Gas purification by use of hot metal getter beds

    Energy Technology Data Exchange (ETDEWEB)

    Albrecht, H.

    1992-11-01

    An experimental program is described which was performed in the frame of a tritium technology task for the NET/ITER fusion fuel cycle. The aim was to investigate commercial gas purifiers containing metallic getters for the purification of gas streams such as the plasma exhaust gas. Five purifiers with up to 3000g of getter material were tested in the PEGASUS facility mainly with respect to the removal of methane, which is known to be much more difficult to remove than other impurities like O{sub 2}, N{sub 2}, or CO. A proposal for a fuel cleanup method based on a combination of getter beds and Pd/Ag diffusors is presented as the main conclusion of the test program. The discussion of this method includes the aspects of flow rates, tritium inventory, and consumption of getter material. (orig.) [Deutsch] Im Rahmen einer Tritium Technology Task fuer den NET/ITER Brennstoff-Kreislauf wurde ein experimentelles Vorhaben durchgefuehrt mit dem Ziel, kommerzielle Gasreiniger, die nach dem Prinzip der Rueckhaltung von Verunreinigungen an heissen Metall-Gettern arbeiten, auf ihre Eignung zur Reinigung von inerten Gasstroemen, wie z.B. dem Plasma Exhaust Gas, zu untersuchen. An der zu diesem Zweck gebauten PEGASUS-Anlage wurden fuenf Gasreiniger mit bis zu 3 kg Gettermaterial eingesetzt, um vor allem die Rueckhaltung von Methan zu bestimmen, das sich wesentlich schwerer abtrennen laesst als etwa O{sub 2}, N{sub 2} oder CO. Als Schlussfolgerung aus dem Versuchsprogramm wird ein Brennstoff-Reinigungsverfahren vorgeschlagen, das aus einer Kombination von Getterbetten und Pd/Ag-Permeatoren besteht. In der Diskussion dieses Verfahrens werden u.a. die Aspekte des Gasdurchsatzes, des Tritium Inventares und des Verbrauchs an Gettermaterial angesprochen. (orig.)

  10. Getter bed for tritium handling: temperature evolution during loading sequences

    Energy Technology Data Exchange (ETDEWEB)

    Ghezzi, F. [Istituto di Fisica del Plasma, Associazione Euratome/ENEA/CNR, Milano (Italy)

    1998-07-01

    The time evolution of the temperature of the alloy in getter beds, during hydrogen loadings, was studied. In order to describe the temperature evolution was developed a model with two times constants, the model was found to fit well the experimental data. This paper presents a method for investigating on the thermal capacity of the bed involved on the heat transfer during the loading. A practical application is given as example. (author)

  11. Effect of the Phosphorus Gettering on Si Heterojunction Solar Cells

    Directory of Open Access Journals (Sweden)

    Hyomin Park

    2012-01-01

    Full Text Available To improve the efficiency of crystalline silicon solar cells, should be collected the excess carrier as much as possible. Therefore, minimizing the recombination both at the bulk and surface regions is important. Impurities make recombination sites and they are the major reason for recombination. Phosphorus (P gettering was introduced to reduce metal impurities in the bulk region of Si wafers and then to improve the efficiency of Si heterojunction solar cells fabricated on the wafers. Resistivity of wafers was measured by a four-point probe method. Fill factor of solar cells was measured by a solar simulator. Saturation current and ideality factor were calculated from a dark current density-voltage graph. External quantum efficiency was analyzed to assess the effect of P gettering on the performance of solar cells. Minority bulk lifetime measured by microwave photoconductance decay increases from 368.3 to 660.8 μs. Open-circuit voltage and short-circuit current density increase from 577 to 598 mV and 27.8 to 29.8 mA/cm2, respectively. The efficiency of solar cells increases from 11.9 to 13.4%. P gettering will be feasible to improve the efficiency of Si heterojunction solar cells fabricated on P-doped Si wafers.

  12. Non-Evaporable Getter Thin Film Coatings for Vacuum Applications

    CERN Document Server

    Prodromides, A E

    2002-01-01

    Getters are solid materials capable of chemisorbing gas molecules on their surface: getters are chemical pumps. They are widely used for a variety of applications such as in particle accelerators, vacuum tubes, field-emission display (FED), inert gas purification systems, H2 plasma purification, hydrogen species recycling as in the Tokamak Fusion Test Reactor. Among the different Non-Evaporable Getter (NEG) materials tested, the TiZrV alloys have the lowest activation temperature. For this reason, the TiZrV coatings were the object of this work. In particular, the aim of this investigation was to understand how to optimise three important properties of TiZrV coatings: to achieve the lowest possible activation temperature (Ta), and to obtain the highest pumping speed and surface pumping capacity. This objective is important in the context of the Large Hadron Collider (LHC) accelerator, since, before this work, the understanding and the knowledge of the TiZrV coatings properties were insufficient to adopt it fo...

  13. Evaluation of Possible Proximate Mechanisms Underlying the Kinship Theory of Intragenomic Conflict in Social Insects.

    Science.gov (United States)

    Galbraith, David A; Yi, Soojin V; Grozinger, Christina M

    2016-12-01

    Kinship theory provides a universal framework in which to understand the evolution of altruism, but there are many molecular and genetic mechanisms that can generate altruistic behaviors. Interestingly, kinship theory specifically predicts intragenomic conflict between maternally-derived alleles (matrigenes) and paternally-derived alleles (patrigenes) over the generation of altruistic behavior in cases where the interests of the matrigenes and patrigenes are not aligned. Under these conditions, individual differences in selfish versus altruistic behavior are predicted to arise from differential expression of the matrigenes and patrigenes (parent-specific gene expression or PSGE) that regulate selfish versus altruistic behaviors. As one of the leading theories to describe PSGE and genomic imprinting, kinship theory has been used to generate predictions to describe the reproductive division of labor in social insect colonies, which represents an excellent model system to test the hypotheses of kinship theory and examine the underlying mechanisms driving it. Recent studies have confirmed the predicted differences in the influence of matrigenes and patrigenes on reproductive division of labor in social insects, and demonstrated that these differences are associated with differences in PSGE of key genes involved in regulating reproductive physiology, providing further support for kinship theory. However, the mechanisms mediating PSGE in social insects, and how PSGE leads to differences in selfish versus altruistic behavior, remain to be determined. Here, we review the available supporting evidence for three possible epigenetic mechanisms (DNA methylation, piRNAs, and histone modification) that may generate PSGE in social insects, and discuss how these may lead to variation in social behavior. © The Author 2016. Published by Oxford University Press on behalf of the Society for Integrative and Comparative Biology. All rights reserved. For permissions please email

  14. Organic getter materials for the removal of hydrogen and its isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Smith, H.M.; Shepodd, T.J.; Gilliom, L.R.

    1990-08-01

    Herein, we describe hydrogen getter technologies developed at SNL and KCD over the past decade. The technologies are based on the irreversible removal of hydrogen by catalytic hydrogenation of unsaturated organic compounds. Different types have been developed: crystalline getters, dialkynes combined with heterogeneous catalysts; and a polymeric getter, a thermoplastic elastomer capable of reacting with hydrogen in the presence of oxygen without producing water. These materials can remove up to 300 cc (STP) of hydrogen per gram of material, and can maintain atmospheres of less than 10 ppM hydrogen. Crystalline getters for tritium and the combination hydrogen(tritium), water, and oxygen are described. The accumulation of hydrogen is usually an undesired event. Large leaks from hydrogen storage and handling facilities pose explosion hazards. Small amounts of hydrogen that may build up in sealed containers after long storage times can damage integral components. Any tritium leak is an immediate health hazard. Hydrogen scavengers or getters can avert all of these potential problems by irreversibly removing hydrogen from such environments. In this paper, we describe the development of two types of organic getters: the first is a new crystalline getter, based on 1,4-bis(phenylethynyl)benzene{sup 5} (DEB); the second is a polymeric hydrogen getter, based on styrene-butadiene copolymer.

  15. Parasite manipulation of the proximate mechanisms that mediate social behavior in vertebrates.

    Science.gov (United States)

    Klein, Sabra L

    2003-08-01

    Paul MacLean was instrumental in establishing the brain regions that mediate the expression of social behaviors in vertebrates. Pathogens can exploit these central mechanisms to alter host social behaviors, including aggressive, reproductive, and parental behaviors. Although some behavioral changes after infection are mediated by the host (e.g., sickness behaviors), other behavioral modifications are mediated by the pathogen to facilitate transmission. The goal of this review is to provide examples of parasite-mediated changes in social behavior and to illustrate that parasites affect host behavior by infecting neurons, causing central nervous system (CNS) inflammation, and altering neurotransmitter and hormonal communication. Secondarily, a comparative approach will be used to demonstrate that the effects of parasites on social behavior are retained across several classes of vertebrates possibly because parasites affect the phylogenetically primitive structures of the limbic system and related neurochemical systems.

  16. Rethinking modern theories of ageing and their classification: the proximate mechanisms and the ultimate explanations

    Directory of Open Access Journals (Sweden)

    Chmielewski Piotr

    2017-09-01

    Full Text Available For a very long time, ageing has been an insurmountable problem in biology. The collection of age-dependent changes that render ageing individuals progressively more likely to die seemed to be an intractable labyrinth of alterations and associations whose direct mechanisms and ultimate explanations were too complex and difficult to understand. The science of ageing has always been fraught with insuperable problems and obstacles. In 1990, Zhores Medvedev presented a list of roughly 300 different hypotheses to illustrate this remarkable complexity of the ageing process and various approaches to understanding its mechanisms, though none of these hypotheses or aspect theories could be the general theory of senescence. Moreover, in the light of current data some of these ideas are obsolete and inapplicable. Nonetheless, the misconception that there are hundreds of valid theories of ageing persists among many researchers and authors. In addition, some of these obsolete and discarded hypotheses, such as the rate of living theory, the wear and tear theory, the poisoning theory, or the entropy theory still can be found in today’s medical textbooks, scientific publications aimed at the general public, and even in scientific writing. In fact, there are only several modern theories of ageing supported by compelling evidence that attempt to explain most of the data in current gerontology. These theories are competing to be a general and integrated model of ageing, making it unlikely that all of them could be true. This review summarises briefly several selected modern theories of senescence in the light of the contemporary knowledge of the biological basis for ageing and current data.

  17. Effect of a collateral ligament sparing surgical approach on mechanical properties of equine proximal interphalangeal joint arthrodesis constructs.

    Science.gov (United States)

    Bras, Jose J; Lillich, James D; Beard, Warren L; Anderson, David E; Armbrust, Laura J; Frink, Elizabeth; Lease, Kevin

    2011-01-01

    To (1) compare the effect of a collateral ligament sparing surgical approach with an open surgical approach on mechanical properties of proximal interphalangeal joint (PIPJ) arthrodesis, and (2) to determine the percentage of articular cartilage surface removed by transarticular (TA) drilling with different diameter drill bits. Randomized paired limb design. Cadaveric equine limbs (n=76). Cadaveric PIPJ were drilled using a 3.5, 4.5, or 5.5 mm drill bit at 80-84° to the dorsal plane to remove articular cartilage and subchondral bone from the distal articular surface of the proximal phalanx (P1) and the proximal articular surface of the middle phalanx (P2). Bone ends were photographed and the percentage of the projected surface area that was denuded of cartilage was measured. PIPJ arthrodesis constructs (3-hole dynamic compression plate [DCP], two 5.5 mm TA screws inserted in lag fashion, medial and lateral to the DCP; DCP-TA) were created using 2 surgical approaches in paired limbs. A conventional open approach was used in 1 limb and a collateral ligament sparing approach used in the other limb. Constructs were tested to failure in single-cycle 3-point dorsopalmar/plantar or lateromedial bending. Maximum load, yield load, and composite stiffness were compared between techniques. The 3.5, 4.5, and 5.5 mm drill bits removed 24±4%, 35±5%, and 45±7% of total PIPJ articular cartilage surface, respectively. Constructs with the collateral ligament sparing approach had significantly greater mean yield load (11.3±2.8 versus 7.68±1.1 kN, P=.008) and mean maximum load (13.5±3.1 versus 10.1±1.94 kN, P=.02) under lateromedial bending. Under dorsopalmar/plantar bending there was no significant difference between surgical approaches. The collateral ligament sparing arthrodesis technique had a shorter surgical time (19±3 minutes) compared with the open technique (31±3 minutes). A collateral ligament sparing surgical approach to the PIPJ with removal of articular

  18. The ultimate and proximate mechanisms driving the evolution of long tails in forest deer mice.

    Science.gov (United States)

    Kingsley, Evan P; Kozak, Krzysztof M; Pfeifer, Susanne P; Yang, Dou-Shuan; Hoekstra, Hopi E

    2017-02-01

    Understanding both the role of selection in driving phenotypic change and its underlying genetic basis remain major challenges in evolutionary biology. Here, we use modern tools to revisit a classic system of local adaptation in the North American deer mouse, Peromyscus maniculatus, which occupies two main habitat types: prairie and forest. Using historical collections, we find that forest-dwelling mice have longer tails than those from nonforested habitat, even when we account for individual and population relatedness. Using genome-wide SNP data, we show that mice from forested habitats in the eastern and western parts of their range form separate clades, suggesting that increased tail length evolved independently. We find that forest mice in the east and west have both more and longer caudal vertebrae, but not trunk vertebrae, than nearby prairie forms. By intercrossing prairie and forest mice, we show that the number and length of caudal vertebrae are not correlated in this recombinant population, indicating that variation in these traits is controlled by separate genetic loci. Together, these results demonstrate convergent evolution of the long-tailed forest phenotype through two distinct genetic mechanisms, affecting number and length of vertebrae, and suggest that these morphological changes-either independently or together-are adaptive. © 2016 The Author(s). Evolution published by Wiley Periodicals, Inc. on behalf of The Society for the Study of Evolution.

  19. Quantum-Mechanical Methods for Quantifying Incorporation of Contaminants in Proximal Minerals

    Directory of Open Access Journals (Sweden)

    Lindsay C. Shuller-Nickles

    2014-07-01

    Full Text Available Incorporation reactions play an important role in dictating immobilization and release pathways for chemical species in low-temperature geologic environments. Quantum-mechanical investigations of incorporation seek to characterize the stability and geometry of incorporated structures, as well as the thermodynamics and kinetics of the reactions themselves. For a thermodynamic treatment of incorporation reactions, a source of the incorporated ion and a sink for the released ion is necessary. These sources/sinks in a real geochemical system can be solids, but more commonly, they are charged aqueous species. In this contribution, we review the current methods for ab initio calculations of incorporation reactions, many of which do not consider incorporation from aqueous species. We detail a recently-developed approach for the calculation of incorporation reactions and expand on the part that is modeling the interaction of periodic solids with aqueous source and sink phases and present new research using this approach. To model these interactions, a systematic series of calculations must be done to transform periodic solid source and sink phases to aqueous-phase clusters. Examples of this process are provided for three case studies: (1 neptunyl incorporation into studtite and boltwoodite: for the layered boltwoodite, the incorporation energies are smaller (more favorable for reactions using environmentally relevant source and sink phases (i.e., ΔErxn(oxides > ΔErxn(silicates > ΔErxn(aqueous. Estimates of the solid-solution behavior of Np5+/P5+- and U6+/Si4+-boltwoodite and Np5+/Ca2+- and U6+/K+-boltwoodite solid solutions are used to predict the limit of Np-incorporation into boltwoodite (172 and 768 ppm at 300 °C, respectively; (2 uranyl and neptunyl incorporation into carbonates and sulfates: for both carbonates and sulfates, it was found that actinyl incorporation into a defect site is more favorable than incorporation into defect-free periodic

  20. Evidence for the circadian gene period as a proximate mechanism of protandry in a pollinating fig wasp.

    Science.gov (United States)

    Gu, Hai-Feng; Xiao, Jin-Hua; Dunn, Derek W; Niu, Li-Ming; Wang, Bo; Jia, Ling-Yi; Huang, Da-Wei

    2014-03-01

    Protandry in insects is the tendency for adult males to emerge before females and usually results from intra-sexual selection. However, the genetic basis of this common phenomenon is poorly understood. Pollinating fig wasp (Agaonidae) larvae develop in galled flowers within the enclosed inflorescences ('figs') of fig trees. Upon emergence, males locate and mate with the still galled females. After mating, males release females from their galls to enable dispersal. Females cannot exit galls or disperse from a fig without male assistance. We sampled male and female Ceratosolen solmsi (the pollinator of Ficus hispida) every 3 h over a 24 h emergence period, and then measured the expression of five circadian genes: period (per), clock (clk), cycle (cyc), pigment-dispersing factor (pdf) and clockwork orange (cwo). We found significant male-biased sexual dimorphism in the expression of all five genes. per showed the greatest divergence between the sexes and was the only gene rhythmically expressed. Expression of per correlated closely with emergence rates at specific time intervals in both male and female wasps. We suggest that this rhythmical expression of per may be a proximate mechanism of protandry in this species.

  1. Linked opening angle and histological and mechanical aspects of the proximal pulmonary arteries of healthy and pulmonary hypertensive rats and calves.

    Science.gov (United States)

    Tian, Lian; Lammers, Steven R; Kao, Philip H; Reusser, Mark; Stenmark, Kurt R; Hunter, Kendall S; Qi, H Jerry; Shandas, Robin

    2011-11-01

    Understanding how arterial remodeling changes the mechanical behavior of pulmonary arteries (PAs) is important to the evaluation of pulmonary vascular function. Early and current efforts have focused on the arteries' histological changes, their mechanical properties under in vitro mechanical testing, and their zero-stress and no-load states. However, the linkage between the histology and mechanical behavior is still not well understood. To explore this linkage, we investigated the geometry, residual stretch, and histology of proximal PAs in both adult rat and neonatal calf hypoxic models of pulmonary hypertension (PH), compared their changes due to chronic hypoxia across species, and proposed a two-layer mechanical model of artery to relate the opening angle to the stiffness ratio of the PA outer to inner layer. We found that the proximal PA remodeling in calves was quite different from that in rats. In rats, the arterial wall thickness, inner diameter, and outer layer thickness fraction all increased dramatically in PH and the opening angle decreased significantly, whereas in calves, only the arterial wall thickness increased in PH. The proposed model predicted that the stiffness ratio of the calf proximal PAs changed very little from control to hypertensive group, while the decrease of opening angle in rat proximal PAs in response to chronic hypoxia was approximately linear to the increase of the stiffness ratio. We conclude that the arterial remodeling in rat and calf proximal PAs is different and the change of opening angle can be linked to the change of the arterial histological structure and mechanics.

  2. Gettering impurities from crystalline silicon by aluminum diffusion using a porous silicon layer

    Energy Technology Data Exchange (ETDEWEB)

    Khedher, N.; Hajji, M.; Bessais, B.; Ezzaouia, H.; Bennaceur, R. [Laboratoire des Applications Solaires, Institut National de Recherche Scientifique et Technique, BP. 95, Hammam Lif (Tunisia); Selmi, A. [Laboratoire de Physique des Semi-conducteurs, Faculte des Sciences de Monastir, 5000 Monastir (Tunisia)

    2005-06-01

    In this paper, we report a study on the possibility of gettering transition metal impurities from solar grade crystalline silicon (Si). Porous silicon layers were formed by the stain-etching method on both sides of the Si wafer. Aluminum diffusion was done throughout the PS layer in an infrared furnace under a (N{sub 2}/O{sub 2}) controlled atmosphere. This enables to getter eventual metal impurities towards the PS layer. The gettering effect was evaluated by measuring the majority carrier density and mobility and the minority carrier diffusion length (L{sub d}) of the Si substrate. For this purpose, Wander Pauw and Hall Effect measurements together with the Light Beam Induced Current (LBIC) technique were used. We noticed that the best gettering corresponds to a heat treatment at 850 C for 30 min; in that case an evident decrease of the majority carrier density and an enhancement of the mobility were observed. After gettering, we found an apparent improvement of the minority carrier diffusion length. These results give evidence of the effectiveness of external gettering treatments by combining (Al-PS) layer for an efficient gettering effect in solar grade monocrystalline Si. (copyright 2005 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  3. Test Results for Implementation of Hydrogen Getter in the DDF-1 Shipping Package

    Energy Technology Data Exchange (ETDEWEB)

    Livingston, R.R.

    2001-06-20

    Implementation of a hydrogen getter for transportation of radioactive materials in the DDF-1 shipping package will support onsite transfers of radioactive materials without extensive characterization or moisture analysis.

  4. Applicability of chemical getter beds to scavenge tritium from inert gases

    Energy Technology Data Exchange (ETDEWEB)

    Maienschein, J.L.

    1976-03-10

    Chemical getters can be used to scavenge tritium from inert gases. Cerium, which forms a hydride with a low dissociation pressure, has high reactivity, and is relatively inexpensive, is a good candidate getter material for such a scavenger system. Mathematical models for using cerium in both fixed- and fluidized-bed reactors predict satisfactory performance. Moreover, the capital cost of a gettering system, estimated to be between $115,000 and $166,000 (m/sup 3//s) flow, is competitive with that of the conventional catalytic-oxidation molecular-sieve system ($330,000/m/sup 3//s) now used. The gettering concept, therefore, warrants further investigation. This report assesses the feasibility of such a system.

  5. Proximal Hypospadias

    Science.gov (United States)

    Kraft, Kate H.; Shukla, Aseem R.; Canning, Douglas A.

    2011-01-01

    Hypospadias results from abnormal development of the penis that leaves the urethral meatus proximal to its normal glanular position. Meatal position may be located anywhere along the penile shaft, but more severe forms of hypospadias may have a urethral meatus located at the scrotum or perineum. The spectrum of abnormalities may also include ventral curvature of the penis, a dorsally redundant prepuce, and atrophic corpus spongiosum. Due to the severity of these abnormalities, proximal hypospadias often requires more extensive reconstruction in order to achieve an anatomically and functionally successful result. We review the spectrum of proximal hypospadias etiology, presentation, correction, and possible associated complications. PMID:21516286

  6. Phosphorous and aluminum gettering in Silicon-Film{trademark} Product II material

    Energy Technology Data Exchange (ETDEWEB)

    Cotter, J.E.; Barnett, A.M.; Hall, R.B. [AstroPower, Inc., Newark, DE (United States)] [and others

    1995-08-01

    Gettering processes are being developed for the Silicon-Film{trademark} Product II solar cell structure. These processes have been developed specifically for films of silicon grown on dissimilar substrates with barrier layers. Gettering with both phosphorous- and aluminum-based processing sequences has resulted in enhancement of minority carrier diffusion length. Long diffusion lengths have allowed the characterization of light trapping in thin films of silicon grown on barrier-coated substrates.

  7. Some Particularities of Operation of Sputter Ion Pumps and Non-Evaporable Getters

    CERN Document Server

    Nesterov, A V

    2001-01-01

    It is shown that hydrogen is the main component of the residual gases in a sputter ion pump which is not baked after a contact with the atmosphere. This makes it appropriate to use a sputter ion pump and a non-evaporate getter simultaneously. Pumping of a sputter ion pump by a non-evaporate getter followed by their simultaneous operation leads to a considerable decrease in the ultimate pressure of the sputter ion pump.

  8. 1,4-diphenylbutadiyne as a potential tritium getter

    Energy Technology Data Exchange (ETDEWEB)

    Miller, H.H.; Bissell, E.E.; Tsugawa, R.T.; Souers, P.C.

    1980-10-01

    Research on the acetylene compound 1,4-diphenylbutadiyne is an effort to develop an air-operative tritium gas scavenger. T/sub 2/ adds to the acetylene bond of the organic in the presence of a metal catalyst. The catalyst also stimulates the oxidation reaction as well. The butadiyne compound has shown good reaction efficiency at 300 ppM T/sub 2/ in static dry air. At this concentration 75% of the scavenged tritium was in the organic. This work has expanded to the investigation of liquid acetylenes, metal acetylene complexes, organometallics and acetylene based alcohols. The best of these compounds has gettered 100% of 10 to 500 ppM T/sub 2/ for both static and dynamic air flow conditions.

  9. Phosphorous gettering in acidic textured multicrystalline solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Montesdeoca-Santana, A. [Departamento de Fisica Basica, Universidad de La Laguna (ULL), Avenida Astrofisico Francisco Sanchez 2, 38206 La Laguna, S/C de Tenerife (Spain); Fraunhofer Institut fuer Solare Energiesysteme ISE, Laboratory and Servicecenter Gelsenkirchen, Auf der Reihe 2, 45884 Gelsenkirchen (Germany); Jimenez-Rodriguez, E.; Diaz-Herrera, B.; Hernandez-Rodriguez, C. [Departamento de Fisica Basica, Universidad de La Laguna (ULL), Avenida Astrofisico Francisco Sanchez 2, 38206 La Laguna, S/C de Tenerife (Spain); Gonzalez-Diaz, B. [Departamento de Fisica Basica, Universidad de La Laguna (ULL), Avenida Astrofisico Francisco Sanchez 2, 38206 La Laguna, S/C de Tenerife (Spain); Departamento de Energia Fotovoltaica, Instituto Tecnologico y de Energias Renovables. Poligono Industrial de Granadilla s/n, 38600 San Isidro-Granadilla de Abona, S/C de Tenerife (Spain); Rinio, M.; Borchert, D. [Fraunhofer Institut fuer Solare Energiesysteme ISE, Laboratory and Servicecenter Gelsenkirchen, Auf der Reihe 2, 45884 Gelsenkirchen (Germany); Guerrero-Lemus, R. [Departamento de Fisica Basica, Universidad de La Laguna (ULL), Avenida Astrofisico Francisco Sanchez 2, 38206 La Laguna, S/C de Tenerife (Spain); Fundacion de Estudios de Economia Aplicada, Catedra Focus-Abengoa, Jorge Juan 46, 28001 Madrid (Spain)

    2011-03-15

    The influence of phosphorus gettering is studied in this work applied to an acidic textured multicrystalline silicon substrate. The texturization was achieved with an HF/HNO{sub 3} solution leading to nanostructures on the silicon surface. It has been demonstrated in previous works that this textured surface decreases the reflectance on the solar cell and increases the surface area improving the photon collection and enhancing the short circuit current. The present study investigates the effect on the minority carrier lifetime of the phosphorous diffusion when it is carried out on this textured surface. The lifetime is measured by means microwave photoconductance decay and quasi steady state phototoconductance devices. The diffused textured wafers are used to fabricate solar cells and their electrical parameters are analyzed. (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  10. Performance testing of aged hydrogen getters against criteria for interim safe storage of plutonium bearing materials.

    Energy Technology Data Exchange (ETDEWEB)

    Shepodd, Timothy J.; Nissen, April; Buffleben, George M.

    2006-01-01

    Hydrogen getters were tested for use in storage of plutonium-bearing materials in accordance with DOE's Criteria for Interim Safe Storage of Plutonium Bearing Materials. The hydrogen getter HITOP was aged for 3 months at 70 C and tested under both recombination and hydrogenation conditions at 20 and 70 C; partially saturated and irradiated aged getter samples were also tested. The recombination reaction was found to be very fast and well above the required rate of 45 std. cc H2h. The gettering reaction, which is planned as the backup reaction in this deployment, is slower and may not meet the requirements alone. Pressure drop measurements and {sup 1}H NMR analyses support these conclusions. Although the experimental conditions do not exactly replicate the deployment conditions, the results of our conservative experiments are clear: the aged getter shows sufficient reactivity to maintain hydrogen concentrations below the flammability limit, between the minimum and maximum deployment temperatures, for three months. The flammability risk is further reduced by the removal of oxygen through the recombination reaction. Neither radiation exposure nor thermal aging sufficiently degrades the getter to be a concern. Future testing to evaluate performance for longer aging periods is in progress.

  11. Including getter effect in a numerical contrast calculation for micrographs: A numerical contrast calculation for electron beam induced current at gettered dislocations

    Energy Technology Data Exchange (ETDEWEB)

    Mohr, H. [Department of Physics, University of Surrey, Guildford, Surrey, GU2 5XH (United Kingdom)

    1996-12-01

    Electron beam induced current (EBIC) microscopy is a very powerful technique for revealing the electrical activity of defects in semiconductors. Gettering of impurities at defects has been observed previously after certain sample heat treatments, which resulted in altered contrast patterns and line scan profiles. Getter effects have been included in a numerical or analytical contrast simulation which employ the Monte Carlo method for generating the carrier distribution. We compare the findings with an observed white contrast at misfit dislocations in EBIC micrographs. {copyright} {ital 1996 American Institute of Physics.}

  12. Porous silicon and aluminum co-gettering experiment in p-type multicrystalline silicon substrate

    Directory of Open Access Journals (Sweden)

    P.N. Vinod

    2007-01-01

    Full Text Available The lifetimes of non-equilibrium minority carriers, which bound with the diffusion length, are considered as two important parameters of the low-quality multicrystalline silicon (mc-Si substrate. Its value defines the quality of the initial substrate. It is also subjected to change as a result of many high-temperature operations during the device fabrication. Therefore, it is necessary to incorporate certain processing steps that either improve or preserve the electronic quality of the mc-Si substrate. In this study, a novel porous silicon and aluminum co-gettering experiment has been applied as a beneficial approach to improve the electronic quality of the low-resistivity mc-Si substrates. Porous silicon layers were prepared by anodization of the n+ silicon region by a simple electrochemical etching process using an aqueous HF-based electrolyte, which leads to the creation of porous silicon microcavities. Besides making porous silicon and aluminum co-gettered samples, both phosphorous and aluminum alloy-gettered samples and reference samples were made. The gettering-induced lifetime enhancement in the test samples was monitored by measuring the lifetime/diffusion length of the test samples using two independent methods such as photoconductivity decay (PCD measurement and the photocurrent generation method (PCM, respectively. The result in both the measurements has shown a reasonably good agreement with each other. Therefore, it is inferred that the applied co-gettering experiment has a synergetic effect to improve the lifetime of the mc-Si substrate.

  13. Nonevaporable getter investigation at the National Synchrotron Light Source

    Energy Technology Data Exchange (ETDEWEB)

    Halama, H.J.; Guo, Y. (Brookhaven National Laboratory, Upton, New York 11973 (US))

    1991-05-01

    We report H{sub 2}, CO, and CO{sub 2} pumping speed measurements on a linear pump using NEG strip St 707 (Saes Getters Inc.) as a function of both adsorbed gases and number of activations. To simulate the conditions of an operating storage ring a gas mixture of 50% H{sub 2}, 35% CO, and 15% CO{sub 2} is used in all measurements. Initial measured pumping speeds of {gt}450 l m{sup {minus}1} s{sup {minus}1} decrease to 200 and 100 l m{sup {minus}1} s{sup {minus}1} for H{sub 2} and CO, respectively, after 70 air exposures. A further drop to 50 l m{sup {minus}1} s{sup {minus}1} for CO occurs at CO loading of 1{times}10{sup {minus}2} Torr l m{sup {minus}1}. CO{sub 2} and CO pumping speeds are about the same. The photon stimulated desorption for both baked and activated strips is an order of magnitude lower than that for stainless steel.

  14. Performance characteristics of lumped nonevaporable getter (NEG) pump

    Energy Technology Data Exchange (ETDEWEB)

    In, Sang-Ryul; Yokouchi, Shigeru; Be, Suck-Hee (JAERI-RIKEN SPring-8 Project Team, Wako, Saitama (Japan)); Maruyama, Takashi

    1991-12-01

    A prototype of the lumped NEG pump (LNP) designed as a main pump of the crotches and absorbers of the SPring-8 storage ring was manufactured with 14 nonevaporable getter (NEG) modules and a cylindrical pump body made of aluminum alloy. Vacuum Performance and operating characteristics of the LNP have been tested. Initial pumping speeds of the LNP for H{sub 2}, CO, N{sub 2} and CO{sub 2} were typically 3 m{sup 3}/s, 1.7 m{sup 3}/s, 1 m{sup 3}/s and 1.3 m{sup 3}/s, respectively. The experimental results were compared with the pumping speeds calculated by the Monte Carlo method. Equilibrium characteristics of the LNP in the activation period were studies to obtain basic data for the design of the auxiliary pumping system, and to set a pertinent activation schedule for the LNP. Operating characteristics such as the power consumption of the NEG modules and the temperature rise of the adjacent chambers including the aluminum alloy pump body during the NEG activation were also investigated. (author).

  15. Radical Beam Gettering Epitaxy of Zno and Gan

    Science.gov (United States)

    Georgobiani, A. N.; Demin, V. I.; Vorobiev, M. O.; Gruzintsev, A. N.; Hodos, I. I.; Kotljarevsky, M. B.; Kidalov, V. V.; Rogozin, I. V.

    2002-11-01

    P-type ZnO layers with a hole mobility about 23 cm2/(V s), and a hole concentration about 1015 cm-3 were grown by means of radical-beam gettering epitaxy (the annealing of n-ZnO single crystals in atomic oxygen flux). The effect of native defects on the photoluminescence spectra of the layers was studied. The dominant bands in the spectra peaked at 370.2 and 400 nm. These bands were attributed to the annihilation of exciton localised on neutral Vzn and to electron transitions from the conduction band to singly positively charged Vzn correspondingly. The effect of annealing in atomic nitrogen flux of p-CaN:Mg films on their photoluminescence spectra and on the value of their conductivity were studied. Such annealing leads to appearance of a number of emission bands that peaked at 404.9, 390.8 and 378.9 nm and increases hole concentration from 5 × 1015 to 5 × 1016 cm-3, and the hole mobility from 120 to 150 cm2/(V s). The n-ZnO - p-GaN:Mg electroluminescence heterostructures were obtained. Their spectrum contains bands in the excitonic region of GaN at the wavelength 360.2 nm and in the edge region at wavelengths 378.9 and 390.8 nm.

  16. Gettering centres in high-energy ion-implanted silicon investigated by point defect recombination

    Science.gov (United States)

    Kögler, R.; Peeva, A.; Werner, P.; Skorupa, W.; Gösele, U.

    2001-04-01

    Self-interstitials were introduced by additional Si + implantation into the vacancy-dominated depth range around half of the projected ion range, RP/2, of high-energy ion-implanted Si in order to balance radiation-induced excess vacancies. The undesired gettering of Cu atoms in this region ( RP/2 effect) could be suppressed. The threshold was determined necessary to remove the Cu gettering at RP/2. It does approximately agree with the number of the calculated excess vacancies. Additional interstitial-type dislocation loops were formed during annealing at RP/2 as the Si + fluence exceeds this threshold. Interstitial clusters were not proven to be the gettering centres for Cu trapping.

  17. Lateral gettering of iron by cavities induced by helium implantation in silicon

    Science.gov (United States)

    Roqueta, F.; Ventura, L.; Grob, J. J.; Jérisian, R.

    2000-11-01

    Lateral gettering has been studied by introducing cavities in the periphery of large active devices. Cavities were induced by helium implantation followed by a thermal treatment on samples previously contaminated by iron. Those cavities are known to be efficient to trap metallic impurities in silicon by chemisorption. The iron distribution in samples of 6×6 mm2 area has been monitored by measuring current versus voltage characteristics and interstitial iron concentrations by deep level transient spectroscopy on Schottky diodes uniformly distributed. A symmetrical iron distribution has been observed with a decreasing concentration close to the gettering region. This lateral gettering is enhanced with increasing thermal budget. Extensions of several millimeters can be obtained allowing applications in power device technology.

  18. Helium implantation induced metal gettering in silicon at half of the projected ion range

    Science.gov (United States)

    Peeva, A.; Fichtner, P. F. P.; Behar, M.; Koegler, R.; Skorupa, W.

    2001-04-01

    Damage has been found in 40 keV He + ion-implanted Si away from the projected ion range Rp, mainly around Rp/2. Cu gettering has been used for detecting implantation induced defects which are formed during rapid thermal annealing (RTA) of 800°C/10 min. Transmission electron microscopy (TEM) micrographs show no visible defects at Rp/2. The Cu gettering peak at Rp/2 is well known for MeV-ion-implanted and annealed Si ( Rp/2 effect). In this study, the corresponding effect is observed for low-energy implantation of a light ion-like He.

  19. Design of the linear non-evaporable getter pump for the PEP-II B factory

    Energy Technology Data Exchange (ETDEWEB)

    Bertolini, L., LLNL

    1997-07-21

    There are several regions in the PEP-II B Factory at SLAC that require distributed pumping to deal with large photo-desorbed gas loads or to produce very low pressures (< 10{sup -9} Torr). These regions include the Low Energy Ring Wiggler dump chambers, the transitions between the High Energy Ring arcs and straight sections, and most importantly the Interaction Region. They have designed a compact Non-Evaporable Getter pump using commercial getters that combines high pumping speed and high sorption capacity. They describe the design features of the NEG pumps, and the test results from prototype pumps. In addition, they discuss future variations of this style of NEG pump.

  20. Identification of getter defects in high-energy self-implanted silicon at Rp/2

    Science.gov (United States)

    Krause-Rehberg, R.; Börner, F.; Redmann, F.; Gebauer, J.; Kögler, R.; Kliemann, R.; Skorupa, W.; Egger, W.; Kögel, G.; Triftshäuser, W.

    2001-12-01

    A strong gettering effect appears after high-energy Si self-implantation and subsequent annealing in two zones at the projected range of the silicon ions ( Rp) and in a region at about Rp/2. The defects responsible for the impurity gettering at Rp/2 were studied by means of positron annihilation. It was found that diffusing Cu impurities were captured by small vacancy agglomerates. Monoenergetic positron beams with improved depth resolution were used to characterize the defects. Excellent depth resolution was obtained when samples were wedge-shaped polished and studied using the Munich Scanning Positron Microscope.

  1. Synthesis of the Getter for Vacuum Insulation Panels (VIPs used on Marine Reefer Containers

    Directory of Open Access Journals (Sweden)

    Yu W.S.

    2016-01-01

    Full Text Available Accurate determination of components released from the VIP is crucial to the selection of the getter that is vital to maintaining its performance of insulation. In this paper, in observation of application of the VIP on marine reefer containers, the VIPs co-developed in our lab were undertaken gas chromatography-mass spectrometer tests to detect the pyrolysis gases released from VIPs at the working condition similar to that of marine reefer containers, and analysis of the composition of the getter was performed by employing the SEM and EDS. It shows that the composite, which was developed by incipient wetness impregnation of cupric nitrate solution on the activated carbon having a high specific surface area, performs well in adsorbing ethylene and propylene from pyrolyzed substances. It is also demonstrated that the as-prepared composite can limit the possibility of hardening of the getter from adsorption of the water vapor. Conclusions are drawn that the getter developed from activated carbon by loading catalytic metal is suitable for VIPs used on marine reefer containers.

  2. Efficiency of dislocations and cavities for gettering of Cu and Fe in silicon

    Science.gov (United States)

    Stritzker, B.; Petravic, M.; Wong-Leung, J.; Williams, J. S.

    2001-04-01

    Dislocations (of interstitial character) as well as cavities are known for their ability to getter impurities within Si. In order to determine the relative gettering strength we produced both dislocations and cavities at different depths within (1 0 0) Si. This was obtained by implantation and subsequent annealing of 3×10 16 (40 keV H)/cm 2 and 1×10 16 (140 keV Si)/cm 2 resulting in cavities and dislocations at depths of 400 nm and 200 nm, respectively. Fe or Cu was then implanted with a dose of 5×10 13 atoms/ cm2 and an energy of 35 keV. By selective implantation of different areas, all possible combinations of impurities, dislocations and cavities were obtained within one Si-sample. The results show, clearly, that Cu-impurities are gettered totally by cavities (or open-volume defects), even when dislocations are also present. In contrast, Fe-impurities, which are released from traps near the surface during annealing, are gettered by both interstitial-based dislocations and open-volume defects. Secondary ion mass spectrometry and transmission electron microscopy analyses reveal defect-Fe-impurity interactions at the different trap sites.

  3. Getter materials for the vacuum insulation of liquid hydrogen storage vessels or transport lines

    Energy Technology Data Exchange (ETDEWEB)

    Boffito, C.; Doni, F.; Ferrario, B.

    1990-09-04

    A getter material is provided which efficiently sorbs gases at low pressure but, when a system failure causes high pressures of hydrogen and oxygen to be present, does not increase its temperature to that which would cause explosive ignition of the hydrogen-oxygen mixture. The material of the invention comprises an alloy of the general formula Zr{sub 1{minus}a}Ti{sub a}V{sub 2{minus}x}Fe{sub x{minus}y}Ni{sub y}. In this formula, a is from 0 to 0.3, x is from 0.5 to 1.5, and y is from 0 to x. Preferably, a=0, x=1, y=0 to 0.5 and even more preferably y=0. Experiments are described to illustrate the performance of materials of the invention in comparison with previously known getter materials. It is shown that preferred traditional Zr-V-Fe getter devices show an extremely high temperature increase up to 720{degree}C when exposed to a high pressure of hydrogen, while the getter devices of the invention reach a temperature of only 230{degree}C. 2 figs., 1 tab.

  4. Deposition and Characterization of Improved Hydrogen Getter Materials - Report on FY 14-15 Activities

    Energy Technology Data Exchange (ETDEWEB)

    Hubbard, Kevin Mark [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sandoval, Cynthia Wathen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-10-15

    The goals of this work have been two-fold. First, to perform an initial, quantitative, optimization of getter performance, with the primary variables being DEB/Pd ratio and UV power. Second, to simplify the deposition process to make it more compatible with the DOE production environment.

  5. NEG (non evaporable getter) pumps for organic compounds and water removal in EUVL tools

    Science.gov (United States)

    Conte, A.; Manini, P.; Raimondi, S.

    2008-03-01

    One of present EUVL challenges is to reduce as much as possible the organic compounds and water partial pressures during the lithographic process. These gases can in fact interact with sensitive surfaces and, in the presence of EUV radiation, decompose to generate carbon-based films and oxides, which are detrimental to the optics, reducing its performance, lifetime and significantly increasing the equipment total cost of ownership. With this respect, use of Non Evaporable Getter (NEG) pumps seems particularly attractive. Getter pumps are very clean, vibration-free, compact, able to deliver large pumping speed for all active gases, including water and hydrogen. In the present paper, we report for the first time the results of specific tests aimed at measuring the pumping speed for some selected organic compounds, namely toluene and decane (n-decane). The study shows that getter pumps can effectively sorb these large organic molecules with high speed and capacity. Speed and capacity increases when operating the getter cartridge at moderate temperature (e.g. 150-200°C), however remarkable sorption is achieved, even at room temperature, without any power applied. When coupled with turbo-molecular pumps NEG pumps have therefore the potential to improve the ultimate vacuum and mitigate the carbon/oxygen contamination in a UHV lithographic system.

  6. Characterization and Testing of Improved Hydrogen Getter Materials - FY16 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Hubbard, Kevin Mark [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sandoval, Cynthia Wathen [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-11-07

    Organic-based hydrogen getter materials have been in use for many years. These materials are able to prevent the dangerous buildup of hydrogen gas in sealed containers, and are also used to protect surrounding materials from degradation caused by chemical reactions. This document describes these materials.

  7. Toward precision smoking cessation treatment II: Proximal effects of smoking cessation intervention components on putative mechanisms of action.

    Science.gov (United States)

    Piper, Megan E; Cook, Jessica W; Schlam, Tanya R; Smith, Stevens S; Bolt, Daniel M; Collins, Linda M; Mermelstein, Robin; Fiore, Michael C; Baker, Timothy B

    2017-02-01

    Understanding how smoking cessation treatments exert their effects can inform treatment development and use. Factorial designs allow researchers to examine whether multiple intervention components affect hypothesized change mechanisms, and whether the affected mechanisms are related to cessation. This is a secondary data analysis of smokers recruited during primary care visits (N=637, 55% women, 87% white) who were motivated to quit. Participants in this fractional factorial experiment were randomized to one level of each of six intervention factors: Prequit Nicotine Patch vs None, Prequit Nicotine Gum vs None, Preparation Counseling vs None, Intensive In-Person Counseling vs Minimal, Intensive Phone Counseling vs Minimal, and 16 vs 8 Weeks of Combination Nicotine Replacement (nicotine patch+nicotine gum). Data on putative mechanisms (e.g., medication use, withdrawal, self-efficacy) and smoking status were gathered using daily assessments and during follow-up assessment calls. Some intervention components influenced hypothesized mechanisms. Prequit Gum and Patch each reduced prequit smoking and enhanced prequit coping and self-efficacy. In-Person Counseling increased prequit motivation to quit, postquit self-efficacy, and postquit perceived intratreatment support. Withdrawal reduction and reduced prequit smoking produced the strongest effects on cessation. The significant effect of combining Prequit Gum and In-Person Counseling on 26-week abstinence was mediated by increased prequit self-efficacy. This factorial experiment identified which putative treatment mechanisms were influenced by discrete intervention components and which mechanisms influenced cessation. Such information supports the combined use of prequit nicotine gum and intensive in-person counseling as cessation interventions that operate via increased prequit self-efficacy. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  8. 'You scratch my back and I scratch yours' versus 'love thy neighbour' : two proximate mechanisms of reciprocal altruism

    NARCIS (Netherlands)

    Smaniotto, Rita Caterina

    2004-01-01

    Evolutionary psychologists generally believe that reciprocal altruism, the mutual providing of benefits, is governed by a ‘You scratch my back and I scratch yours’, or scorekeeping mechanism. According to this view, individuals are primarily concerned with maintaining a balanced relationship; that

  9. Minority-carrier lifetime optimization in silicon MOS devices by intrinsic gettering

    Science.gov (United States)

    Choe, Kwang Su; Jang, Byung Nam

    2000-09-01

    The effect of intrinsic gettering on the minority-carrier generation lifetime ( τg) of Si MOS devices fabricated on CZ and HMCZ Si substrates of varying interstitial oxygen concentration was investigated. Wafers cut from 57 mm diameter Si ingots grown under a horizontal magnetic field of B=0 to B=5.4 kG were divided into three groups according to the initial interstitial oxygen concentration: low oxygen (8-12 ppma (New ASTM)), medium oxygen (13-17 ppma), and high oxygen (18-20 ppma). When subjected to an intrinsic gettering method consisting of 1150°C/1 h denudation and 650°C/1 h nucleation preanneal followed by 1000°C/11 h process simulation anneal, the medium-oxygen CZ Si specimens by far showed the best intrinsic gettering effect, yielding a generation lifetime ( τg) of 26.7 μs as compared to those of 5 μs or less observed in other specimens. Apparently, the low-oxygen CZ Si specimens lacked sufficient SiO x nuclei to cause oxygen precipitation required for intrinsic gettering, while the high-oxygen CZ Si specimens had too many SiO x nuclei to cause the oxygen precipitation terminate prematurely during the 1000°C/11 h process simulation step. As for the HMCZ Si specimens, on the other hand, the lack of grown-in defects, which may work well for nongettering processes, is believed to have muted the effect of the intrinsic gettering heat treatment.

  10. Structural evidence for counter-current flow in proximal tubules versus pertitubular capillaries in the rat kidney. Evaluation of the counter-current mechanism between the proximal convoluted tubules and the peritubular capillaries in the rat nephron

    DEFF Research Database (Denmark)

    Faarup, P; Holstein-Rathlou, N H; Hegedüs, V

    2000-01-01

    BACKGROUND: In spite of the very high exchange of water and solutes between the proximal tubules and the peritubular capillaries, very little is known about flow directions in these two interrelated structures. We therefore developed a morphological technique suitable for the quantitative...... evaluation of a counter-current system between the proximal convoluted tubules and the peritubular capillaries in rat renal cortex. METHODS: In male pentothal-anesthetized Wistar rats (body weight 200-250 g), India ink was injected into the aorta above the renal arteries, followed by instant freezing...... of the right kidney in isopentane at -165 degrees C, and subsequent freeze-substitution in alcohol. In microscopic slides from kidneys in which only 20-55% of the cortical peritubular capillary loops was filled with ink--representing the arterial end of the capillaries--and in which the proximal tubular...

  11. Distinct mechanisms underlie adaptation of proximal tubule Na+/H+ exchanger isoform 3 in response to chronic metabolic and respiratory acidosis.

    Science.gov (United States)

    Silva, Pedro Henrique Imenez; Girardi, Adriana Castello Costa; Neri, Elida Adalgisa; Rebouças, Nancy Amaral

    2012-04-01

    The Na(+/)H(+) exchanger isoform 3 (NHE3) is essential for HCO(3)(-) reabsorption in renal proximal tubules. The expression and function of NHE3 must adapt to acid-base conditions. The goal of this study was to elucidate the mechanisms responsible for higher proton secretion in proximal tubules during acidosis and to evaluate whether there are differences between metabolic and respiratory acidosis with regard to NHE3 modulation and, if so, to identify the relevant parameters that may trigger these distinct adaptive responses. We achieved metabolic acidosis by lowering HCO(3)(-) concentration in the cell culture medium and respiratory acidosis by increasing CO(2) tension in the incubator chamber. We found that cell-surface NHE3 expression was increased in response to both forms of acidosis. Mild (pH 7.21 ± 0.02) and severe (6.95 ± 0.07) metabolic acidosis increased mRNA levels, at least in part due to up-regulation of transcription, whilst mild (7.11 ± 0.03) and severe (6.86 ± 0.01) respiratory acidosis did not up-regulate NHE3 expression. Analyses of the Nhe3 promoter region suggested that the regulatory elements sensitive to metabolic acidosis are located between -466 and -153 bp, where two consensus binding sites for SP1, a transcription factor up-regulated in metabolic acidosis, were localised. We conclude that metabolic acidosis induces Nhe3 promoter activation, which results in higher mRNA and total protein level. At the plasma membrane surface, NHE3 expression was increased in metabolic and respiratory acidosis alike, suggesting that low pH is responsible for NHE3 displacement to the cell surface.

  12. Molecular mechanism of kNBC1—carbonic anhydrase II interaction in proximal tubule cells

    Science.gov (United States)

    Pushkin, Alexander; Abuladze, Natalia; Gross, Eitan; Newman, Debra; Tatishchev, Sergei; Lee, Ivan; Fedotoff, Olga; Bondar, Galyna; Azimov, Rustam; Ngyuen, Matt; Kurtz, Ira

    2004-01-01

    We have recently shown that carbonic anhydrase II (CAII) binds in vitro to the C-terminus of the electrogenic sodium bicarbonate cotransporter kNBC1 (kNBC1-ct). In the present study we determined the molecular mechanisms for the interaction between the two proteins and whether kNBC1 and CAII form a transport metabolon in vivo wherein bicarbonate is transferred from CAII directly to the cotransporter. Various residues in the C-terminus of kNBC1 were mutated and the effect of these mutations on both the magnitude of CAII binding and the function of kNBC1 expressed in mPCT cells was determined. Two clusters of acidic amino acids, L958DDV and D986NDD in the wild-type kNBC1-ct involved in CAII binding were identified. In both acidic clusters, the first aspartate residue played a more important role in CAII binding than others. A significant correlation between the magnitude of CAII binding and kNBC1-mediated flux was shown. The results indicated that CAII activity enhances flux through the cotransporter when the enzyme is bound to kNBC1. These data are the first direct evidence that a complex of an electrogenic sodium bicarbonate cotransporter with CAII functions as a transport metabolon. PMID:15218065

  13. Proximal renal tubular acidosis

    Science.gov (United States)

    Renal tubular acidosis - proximal; Type II RTA; RTA - proximal; Renal tubular acidosis type II ... by alkaline substances, mainly bicarbonate. Proximal renal tubular acidosis (Type II RTA) occurs when bicarbonate is not ...

  14. Vacuum properties of TiZrV non-evaporable getter films [for LHC vacuum system

    CERN Document Server

    Benvenuti, Cristoforo; Costa-Pinto, P; Escudeiro-Santana, A; Hedley, T; Mongelluzzo, A; Ruzinov, V; Wevers, I

    2001-01-01

    Sputter-deposited thin films of TiZrV are fully activated after 24 h "in situ" heating at 180 degrees C. This activation temperature is the lowest of some 18 different getter coatings studied so far, and it allows the use of the getter thin film technology with aluminium alloy vacuum chambers, which cannot be baked at temperatures higher than 200 degrees C. An updated review is given of the most recent results obtained on TiZrV coatings, covering the following topics: influence of the elemental composition and crystal structure on activation temperature, discharge gas trapping and degassing, dependence of pumping speed and surface saturation capacity on film morphology, ageing consequent to activation-air-venting cycles and ultimate pressures. Furthermore, the results obtained when exposing a coated particle beam chamber to synchrotron radiation in a real accelerator environment (ESRF Grenoble) are presented and discussed. (13 refs).

  15. Electron spectroscopy study of the oxidation of a Zr-Fe getter. Pt. 2; Valence states

    Energy Technology Data Exchange (ETDEWEB)

    Puppin, E.; Braicovich, L.; Michelis, B. de; Vavassori, P.; Vescovo, E. (Ist. di Fisica, Politecnico di Milano (Italy))

    1992-03-15

    The valence electron states of a Zr-Fe getter having Zr{sub 2}Fe as majority component (80% of the total volume) and their evolution upon oxidation at room tempererature are studied with direct photoemission (h{nu}=21.2 and 40.8 eV) and inverse photoemission (isochromats in the range 12-21 eV). In the clean getter direct photoemission is mostly sensitive to Fe-derived states and inverse photoemission to Zr-derived states. Direct photoemission shows the modification of oxygen-p-derived states in the suboxide-oxide transition and the effect of Fe-oxygen interaction with a depletion of Fe d states near the Fermi level. Inverse photoemission shows a progressive localization of the Zr d states upon oxidation. (orig.).

  16. Evaluation of H2 Getter Materials for Use in the TRUPACT-II

    Energy Technology Data Exchange (ETDEWEB)

    Livingston, R.R.

    1999-11-15

    Savannah River Site (SRS) has many waste drums containing Pu-238 that exceed the currently allowed wattage for transportation in the Transuranic Package Transporter-II (TRUPACT-II). By eliminating layers of confinement in waste drums and using getters to remove hydrogen gas, the TRUPACT-II waste loading can be increased significantly, with the potential of reaching the package''s 40-watt thermal limit. The cost savings associated with increasing the waste loading are enormous, and can be measured by reduced numbers of shipments, required processing facilities, and years of effort. To support the decision-making process and provide a good starting point for future development efforts at SRTC, the design requirements for a getter system to be used in the TRUPACT-II were compiled and are discussed in detail in the Appendix.

  17. XPS study of the process of oxygen gettering by thin films of PACVD boron

    Science.gov (United States)

    Ennaceur^1, M. M.; Terreault, B.

    2000-06-01

    Numerous collector samples have been exposed in the TdeV tokamak, either to plasma assisted chemical vapor boronization only, or to boronization plus tokamak power discharges. They have been analyzed by X-ray photoelectron spectroscopy (XPS) in order to characterize and better understand the process by which the boron-rich film getter ambient oxygen. It was found that the state of oxidation of the samples after boronization is the most reliable predictor of subsequent machine performance. The gettering capacity is high, on the order of 10 21 O/m 2, and affects a surprisingly thick layer (˜100 nm), but the oxide always remains substoichiometric (with a formula BO x, x < 1). The oxidation is clearly activated by the plasma, during both glow discharge deposition and power discharges, but in this respect the latter are much more effective than the former.

  18. Vacuum properties of TiZrV non-evaporable getter films

    CERN Document Server

    Benvenuti, Cristoforo; Costa-Pinto, P; Escudeiro-Santana, A; Hedley, T; Mongelluzzo, A; Ruzinov, V; Wevers, I

    1999-01-01

    Sputter-deposited thin films of TiZrV are fully activated after 24 h "in situ" heating at 180 °C. This activation temperature is the lowest of some 18 different getter coatings studied so far, and it allows the use of the getter thin film technology with aluminium alloy vacuum chambers, which cannot be baked at temperatures higher than 200 °C.An updated review is given of the most recent results obtained on TiZrV coatings, covering the following topics: influence of the elemental composition and crystal structure on activation temperature, discharge gas trapping and degassing, dependence of pumping speed and surface saturation capacity on film morphology, ageing consequent to activation-air venting cycles and ultimate pressures. Furthermore, the results obtained when exposing a coated particle beam chamber to synchrotron radiation in a real accelerator environment (ESRF Grenoble) are presented and discussed.

  19. Method for absorbing hydrogen using an oxidation resisant organic hydrogen getter

    Science.gov (United States)

    Shepodd, Timothy J [Livermore, CA; Buffleben, George M [Tracy, CA

    2009-02-03

    A composition for removing hydrogen from an atmosphere, comprising a mixture of a polyphenyl ether and a hydrogenation catalyst, preferably a precious metal catalyst, and most preferably platinum, is disclosed. This composition is stable in the presence of oxygen, will not polymerize or degrade upon exposure to temperatures in excess of 200.degree. C., or prolonged exposure to temperatures in the range of 100-300.degree. C. Moreover, these novel hydrogen getter materials can be used to efficiently remove hydrogen from mixtures of hydrogen/inert gas (e.g., He, Ar, N.sub.2), hydrogen/ammonia atmospheres, such as may be encountered in heat exchangers, and hydrogen/carbon dioxide atmospheres. Water vapor and common atmospheric gases have no adverse effect on the ability of these getter materials to absorb hydrogen.

  20. Assessment of Zr-Fe-V getter alloy for gas-gap heat switches

    Science.gov (United States)

    Prina, M.; Kulleck, J. G.; Bowman, R. C., Jr.

    2000-01-01

    A commercial Zr-V-Fe alloy (i.e., SAES Getters trade name alloy St-172) has been assessed as reversible hydrogen storage material for use in actuators of gas gap heat switches. Two prototype actuators containing the SAES St-172 material were built and operated for several thousand cycles to evaluate performance of the metal hydride system under conditions simulating heat switch operation.

  1. Synthesis of the Getter for Vacuum Insulation Panels (VIPs) used on Marine Reefer Containers

    OpenAIRE

    Yu W.S.; Zhu Z.W.; Chen J.; Zheng Q.R.

    2016-01-01

    Accurate determination of components released from the VIP is crucial to the selection of the getter that is vital to maintaining its performance of insulation. In this paper, in observation of application of the VIP on marine reefer containers, the VIPs co-developed in our lab were undertaken gas chromatography-mass spectrometer tests to detect the pyrolysis gases released from VIPs at the working condition similar to that of marine reefer containers, and analysis of the composition of the g...

  2. Silver-based getters for {sup 129}I removal from low-activity waste

    Energy Technology Data Exchange (ETDEWEB)

    Asmussen, R. Matthew; Neeway, James J.; Lawter, Amanda R.; Wilson, Andrew; Qafoku, Nikolla P. [Pacific Northwest National Laboratory, Richland, WA (United States). Geosciences Group

    2016-07-01

    A prominent radionuclide of concern in nuclear wastes, {sup 129}I, is present in low-activity wastes (LAW) at the Hanford site. Several Ag-containing materials were tested as immobilization agents, or ''getters'', for I (as iodide, I{sup -}) removal from deionized (DI) water and a liquid LAW simulant: Ag impregnated activate carbon (Ag-C), Ag exchanged zeolite (Ag-Z), and argentite. In anoxic batch experiments with DI water, the Ag-C and argentite were most effective, with maximum K{sub d} values of 6.2 x 10{sup 5} mL/g for the Ag-C and 3.7 x 10{sup 5} mL/g for the argentite after 15 days. Surface area and Ag content were found to influence the performance of the getters in DI water. In the anoxic batch experiments with LAW simulant, Ag-Z vastly outperformed the other getters with K{sub d} values of 2.2 x 10{sup 4} mL/g at 2 h, which held steady until 15 days, compared with 1.8 x 10{sup 3} mL/g reached at 15 days by the argentite. All getters were stable over long periods of time (i.e. 40 days) in DI water, while the Ag-Z and argentite were also stable in the LAW simulant. Ag-Z was found to have consistent I removal upon crushing to a smaller particle size and in the presence of O{sub 2}, making it a strong candidate for the treatment of LAW containing I.

  3. Zr-Ni alloys as candidate getter materials for tritium processing

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, Kuniaki; Tanaka, Kouri; Matsuyama, Masao (Hydrogen Isotope Research Center, Toyama Univ. (Japan)); Hasegawa, Kiyoshi (Faculty of Engineering, Toyama Univ. (Japan))

    1991-12-01

    Reversible tritium getters are indispensable for the safe handling of a large amount of tritium in the fuel processing for thermonuclear fusion reactors. In Zr-Ni metallic compounds, we looked for the reversible getters showing the heat of deuteride formation around -25 kcal/mol (D{sub 2}) which will be appropriate to the storage-supply-recovery of tritium. Among five metallic compounds used in this study, we found that the first plateau for ZrNi and Zr{sub 9}Ni{sub 11} showed {Delta}H{sup 0}{approx equal}-25 kcal/mol (D{sub 2}). The second plateau for ZrNi gave {Delta}H{sup 0}=-19.2 kcal/mol (D{sub 2}). This suggests that ZrNi is also applied as the source of tritium supply near one atmosphere at relatively low temperature (260deg C). They were withstanding pulverization and nonflammable against air exposure. In addition, ZrNiD{sub 2.3} was reactivated quite easily with vacuum heat at 300deg C even after air exposure. Those properties of ZrNi and/or Zr{sub 9}Ni{sub 11}, are quite promising as the reversible tritium getter in the fuel processing for thermonuclear fusion reactors. (orig.).

  4. Development of metal getter for in-situ irradiation test of fusion blanket

    Energy Technology Data Exchange (ETDEWEB)

    Futamura, Yoshiaki [Toyama Univ. (Japan). Hydrogen Isotope Research Center; Tsuchiya, Kunihiko; Imaizumi, Hideki; Wakisaka, Yuichi; Kabutomori, Toshiki; Kawamura, Hiroshi

    1995-03-01

    In-situ irradiation test of fusion blanket is planned in JMTR using lithium ceramics and beryllium as tritium breeders and neutron multipliers, and it is necessary for the recovery of tritium gas to develop metal getters. Characteristics of several materials were estimated and Zr{sub 9}Ni{sub 11} alloy, chosen in the report, was one candidate for a metal getter. It has a variety of advantages as compared to other metal getters: (1) Good characteristics similar to uranium (U), (2) Easy to handle, (3) Incombustible materials. Zr{sub 9}Ni{sub 11} alloy was fabricated and the equilibrium dissociation pressure of hydrogen was measured and evaluated on amounts of hydrogen absorption (H/M) at 20, 100, 200 and 300degC. It was evident from this measurement that Zr{sub 9}Ni{sub 11} alloy had broad and stable plateaus when H/M was more than 0.33 (50 cm{sup 3}/g). The equilibrium dissociation pressure of Zr{sub 9}Ni{sub 11} alloy was less than 10{sup -4} Pa within H/M=0.13 (20 cm{sup 3}/g). These results thus show Zr{sub 9}Ni{sub 11} alloy to be a preferable material for recovery of tritium gas. (author).

  5. New Technique to Determine Gettering Efficiency of Heavy Metals and Its Application to Carbon-Ion-Implanted Si Epitaxial Wafers

    Science.gov (United States)

    Itoga, Toshihiko; Hozawa, Kazuyuki; Takeda, Kazuo; Isomae, Seiichi; Ohkura, Makoto

    2001-04-01

    Using a newly developed method to evaluate the gettering efficiency of Si wafers, we found that C-ion implantation prior to epitaxial growth greatly improves the gettering efficiency of heavy metals in epitaxial Si wafers. The gettering efficiency was evaluated through direct observation by total X-ray reflection fluorescence (TXRF) by counting the number of heavy metal atoms that diffused from the back to the front surface of wafers. Heavy metals were deposited on the backside surface of Si wafers from metal-dissolved aqua solution. Two-step annealing was carried out after the deposition. The first step caused metal diffusion and the second produced precipitation from the front surface of the wafers. The effectiveness of the method was confirmed by comparing the results obtained from as-received and intrinsic (or internal) gettering (IG)-processed Czochralski-grown Si wafers. The method was applied to C-ion-implanted epitaxial Si wafers to confirm the improvement in gettering efficiency in accordance with the implanted C dose. The effectiveness of the C-ion implantation was also confirmed by evaluating the electrical characteristics of the oxide grown on the Si wafers.

  6. Effect of Al-induced gettering and back surface field on the efficiency of Si solar cells

    Science.gov (United States)

    Plekhanov, P. S.; Negoita, M. D.; Tan, T. Y.

    2001-11-01

    In silicon solar cell fabrication, impurity gettering from Si by an aluminum layer and indiffusion of Al for creating the back surface field (BSF) are inherently carried out in the same process. We have modeled these two processes and analyzed their impact on solar cell efficiency. The output of gettering and Al indiffusion modeling is used as an input for calculation of solar cell efficiency. The cell efficiency gain is obtained as a function of the processes duration. To check the relative contributions of gettering and BSF in improving the cell efficiency, their effects are evaluated together as well as separately. It is found that, for solar cells fabricated from low quality, multicrystalline Si, the efficiency gain is solely due to gettering. In solar cells made of high quality Si, the efficiency gain is primarily due to gettering, but the BSF may play a significant role if the cell thickness is less than about 200 μm. The two effects are found to be synergetic. The model provides a means for optimization of the temperature regime for both processes, as well as for maximization of solar cell efficiency.

  7. Two-dimensional LBIC and internal quantum efficiency investigations of porous silicon-based gettering procedure in multicrystalline silicon

    Energy Technology Data Exchange (ETDEWEB)

    Dimassi, W.; Bouaicha, M.; Kharroubi, M.; Lajnef, M.; Ezzaouia, H. [Laboratoire de Photovoltaique, des Semi-conducteurs et des Nanostructures, Centre de Recherches et des Technologies de l' Energie, Technopole de Borj-Cedria, BP 95 Hammam-Lif 2050 (Tunisia); Bessais, B. [Laboratoire des Nanomateriaux et des Systemes Pour l' Energie, Centre de Recherches et des Technologies de l' Energie, Technopole de Borj-Cedria, BP 95 Hammam-Lif 2050 (Tunisia)

    2008-11-15

    In this work, a porous silicon-based gettering technique was applied to multicrystalline silicon (mc-Si) wafers. Porous silicon (PS) was formed by the stain-etching technique and was used as a sacrificial layer for efficient external purification technique. The gettering procedure consists of achieving a PS/mc-Si/PS structure that undergoes a heat treatment at 900 C for 90 min in an infrared furnace under a N{sub 2} ambient. After removing the PS layers, mc-Si solar cells were realized. The effect of the gettering procedure was evaluated by means of the laser beam-induced current (LBIC) mapping, the internal quantum efficiency (IQE) mapping and the dark current-voltage (I-V) characteristic. Consequently, LBIC and IQE images show an enhancement of the gettered sample as compared to a reference untreated one. The serial resistance and the shunt resistance carried out from the dark I-V curves confirm this gettering-related solar cell improvement. (author)

  8. Measuring deuterium permeation through tungsten near room temperature under plasma loading using a getter layer and ion-beam based detection

    Directory of Open Access Journals (Sweden)

    Stefan Kapser

    2017-08-01

    Full Text Available A method to measure deuterium permeation through tungsten near room temperature under plasma loading is presented. The permeating deuterium is accumulated in a getter layer of zirconium, titanium or erbium, respectively, on the unexposed side of the sample. Subsequently, the amount of deuterium in the getter is measured ex-situ using nuclear reaction analysis. A cover layer system on the getter prevents direct loading of the getter with deuterium from the gas phase during plasma loading. In addition, it enables the distinction of deuterium in the getter and at the cover surface. The method appears promising to add additional permeation measurement capabilities to deuterium retention experiments, also in other plasma devices, without the need for a complex in-situ permeation measurement setup.

  9. Copper gettering at half the projected ion range induced by low-energy channeling He implantation into silicon

    Science.gov (United States)

    Fichtner, P. F. P.; Behar, M.; Kaschny, J. R.; Peeva, A.; Koegler, R.; Skorupa, W.

    2000-08-01

    He+ ions were implanted at 40 keV into Si channel direction at room temperature (RT) and at 350 °C. The Si samples were subsequently doped with Cu in order to study the gettering of Cu atoms at the defective layer. A subsequent annealing at 800 °C was performed in order to anneal the implantation damage and redistribute the Cu into the wafer. The samples were analyzed by Rutherford backscattering channeling and transmission electron microscopy techniques. The Cu distribution was measured by secondary ion mass spectrometry (SIMS). The SIMS experiments show that, while the 350 °C implant induces gettering at the He projected range (Rp) region, the same implant performed at RT has given as a result, gettering at both the Rp and Rp/2 depths. Hence, this work demonstrates that the Rp/2 effect can be induced by a light ion implanted at low energy into channeling direction.

  10. Non-evaporable getter performance in the Photon Factory electron storage ring

    Energy Technology Data Exchange (ETDEWEB)

    Hori, Y.; Kobayashi, M. (National Lab. for High Energy Physics, Tsukuba, Ibaraki (Japan))

    1990-01-01

    A non-evaporable getter (NEG) was tested in the Photon Factory in the pressure range 10{sup -11} to 10{sup -9} torr. To test the pumping performance with gas load, one NEG unit was installed in the newly constructed vacuum duct and the other in a fully outgassed duct. The NEGs under both situations worked well under these conditions, as did the distributed ion pumps (DIP). The pumping speed of the NEG for hydrogen seems to be less than the nominal value. An additional pumping is required for pumping methane. A titanium sublimation pump is more effective in pumping carbon monoxide than the NEG. (author).

  11. XPS analysis of the activation process in non-evaporable getter thin films

    CERN Document Server

    Lozano, M

    2000-01-01

    The surface activation process of sputter-coated non-evaporable getter (NEG) thin films based on Ti-Zr and Ti-Zr-V alloys has been studied in situ by means of X-ray photoelectron spectroscopy. After exposure of the NEG thin films to ambient air they become reactivated after a thermal treatment in an ultrahigh vacuum. In our case the films are heated up to ~250 degrees C for 2 h in a base pressure of ~10/sup -9/ Torr. (18 refs).

  12. Multiset proximity spaces

    Directory of Open Access Journals (Sweden)

    A. Kandil

    2016-10-01

    Full Text Available A multiset is a collection of objects in which repetition of elements is essential. This paper is an attempt to explore the theoretical aspects of multiset by extending the notions of compact, proximity relation and proximal neighborhood to the multiset context. Examples of new multiset topologies, open multiset cover, compact multiset and many identities involving the concept of multiset have been introduced. Further, an integral examples of multiset proximity relations are obtained. A multiset topology induced by a multiset proximity relation on a multiset M has been presented. Also the concept of multiset δ- neighborhood in the multiset proximity space which furnishes an alternative approach to the study of multiset proximity spaces has been mentioned. Finally, some results on this new approach have been obtained and one of the most important results is: every T4- multiset space is semi-compatible with multiset proximity relation δ on M (Theorem 5.10.

  13. Lateral gettering of iron and platinum by cavities induced by helium implantation in silicon

    Science.gov (United States)

    Roqueta, F.; Ventura, L.; Grob, J. J.; Jérisian, R.

    2001-05-01

    The aim of this study is to characterize the lateral gettering of iron and platinum atoms by introducing cavities at the periphery of large active device areas. Cavities have been obtained by helium implantation ( 5×10 16 He+/ cm2, 40 keV) followed by a thermal treatment on samples previously contaminated by iron and platinum. These cavities are known to be efficient in trapping metallic impurities in silicon by chemisorption. The wafers were annealed in the range of 800-1000°C for several minutes in a neutral ambience (N 2). The metallic distribution has been monitored in each active device area by using current versus voltage and deep level transient spectroscopy techniques (DLTS). A symmetrical distribution of metallic impurities and current values has been observed in each active region. The influence of cavities extends laterally to several millimeters depending on the temperature and time of diffusion. This lateral gettering effect is suitable for the purification of transverse power devices.

  14. Tritium purification via zirconium--manganese--iron alloy getter St 909 in flow processes

    Energy Technology Data Exchange (ETDEWEB)

    Baker, J.D.; Meikrantz, D.H.; Pawelko, R.J.; Anderl, R.A. (Idaho National Engineering Laboratory, EG G Idaho, Inc., Idaho Falls, Idaho 83415-7111 (United States)); Tuggle, D.G. (Los Alamos National Laboratory, Los Alamos, New Mexico 87544 (United States))

    1994-03-01

    A zirconium--manganese--iron alloy, St 909, was evaluated as a purifier in tritium handling, transport, and storage applications. High efficiency removal of CH[sub 4], CO, CO[sub 2], NH[sub 3], and O[sub 2] was observed at concentrations of 0.1% to 1% in helium. Gas streams at 100--5000 sccm were passed through getters operated at 600--800 [degree]C. On-getter residence times of two seconds were required to achieve [gt]99% removal of these reactive impurities. At this removal efficiency level, the individual impurity capacity of 100 g of St 909 purifier at 800 [degree]C was 0.59, 0.28, 0.19, 0.14, and 0.12 moles of CH[sub 4], CO, CO[sub 2], O[sub 2], and NH[sub 3], respectively. Hydrogen containing gasses, CH[sub 4] and NH[sub 3] were cracked on the purifier and the resultant elemental hydrogen was released. Only 8[plus minus]2 sccm of H[sub 2] were retained on 100 g of St 909 at 800 [degree]C. These features suggest that this alloy can be employed as an efficient purifier for hydrogen isotopes in inert gas, nitrogen, or perhaps even H, D, or T streams.

  15. Tritium purification via zirconium-manganese-iron alloy getter st 909 in flow processes

    Energy Technology Data Exchange (ETDEWEB)

    Baker, J.D.; Meikrantz, D.H.; Pawelko, R. J.; Anderl, R.A. [Idaho National Engineering Lab., Idaho Falls, ID (United States)]|[EC& G Idaho, Inc., Idaho Falls, ID (United States); Tuggle, D.G. [Los Alamos National LAb., NM (United States)

    1995-03-01

    A zirconium-manganese-iron alloy, St 909, was evaluated as a purifier in tritium handling, transport, and storage applications. High efficiency removal of CH{sub 4}, CO, CO{sub 2}, NH{sub 3}, and O{sub 2} was observed at concentrations of 0.1 to 1% in helium. Gas streams at 100 to 5000 sccm were passed through getters operated at 500-800{degree}C. On-getter residence times of two seconds were required to achieve > 99% removal of these reactive impurities. At this removal efficiency level, the individual impurity capacity of 100 g of St 909 purifier at 800{degree}C was 0.59, 0.28, 0.19, 0.14 and 0.12 moles of CH{sub 4}, CO, CO{sub 2}, O{sub 2} and NH{sub 3}, respectively. Hydrogen containing gases, CH{sub 4} and NH{sub 3}, were cracked on the purifier and the resultant elemental hydrogen was released. Only 8{+-}2 scc of H{sub 2} were retained on 100 g of St 909 at 800{degree}C. These features suggest that this alloy can be employed as an efficient purifier for hydrogen isotopes in inert gas, nitrogen, or perhaps even H, D, or T streams. 12 refs., 4 figs., 1 tab.

  16. The characterisation of non-evaporable getters by Auger electron spectroscopy Analytical potential and artefacts

    CERN Document Server

    Scheuerlein, C; Taborelli, M

    2002-01-01

    The surfaces of getter materials are particularly difficult to analyse because of their high chemical reactivity. The results obtained can be strongly influenced by the experimental set-up and procedures. In this paper the experimental influence on the Auger electron spectroscopy results is discussed, based on the measurements of more than 100 different non-evaporable getter (NEG) materials. There are four typical changes in the Auger electron spectra when a NEG becomes activated. The oxygen peak intensity decreases, the shape of the metal peaks changes, the carbon peak shape changes shape and intensity and a chlorine peak occurs. All these changes are affected by instrumental artefacts. The Zr-MNV peak shape changes occurring during the reduction of ZrO2 are well suited to determine the onset of NEG activation, while the slope with which the O-KLL peak intensity decreases in a certain temperature range is a better criterion for the determination of the temperature at which activation is complete. The O-KLL i...

  17. The use of synthetic hydrocalcite as a chloride-ion getter for a barrier aluminum anodization process

    Energy Technology Data Exchange (ETDEWEB)

    Panitz, J.K.G.; Sharp, D.J.

    1995-11-01

    Chloride ion contamination at parts per billion concentrations plaques electrochemists studying barrier anodic aluminum oxide film growth and anodic aluminum oxide capacitor manufacturers. Chloride ion contamination slows film growth and reduces film quality. We have demonstrated that synthetic hydrocalcite substantially reduces the detrimental effects of chloride ion contamination in an aqueous electrolyte commonly used to grow barrier anodic aluminum oxide. We have determined that problems arise if precautions are not taken when using synthetic hydrocalcite as a chloride-ion getter in an aqueous electrolyte. Synthetic hydrocalcite is somewhat hydrophobic. If this powder is added directly to an aqueous electrolyte, some powder disperses; some floats to the top of the bath and forms scum that locally impedes anodic film formation. Commercially available powder contains a wide range of particle sizes including submicrometer-sized particles that can escape through filters into the electrolyte and cause processing problems. These problems can be over come if (1) the getter is placed in filter bags, (2) a piece of filter paper is used to skim trace amounts of getter floating on the top of the bath, (3) dummy runs are performed to scavenge chloride-ion loaded getter micelles dispersed in the bath, and (4) substrates are rinsed with a strong stream of deionized water to remove trace amounts of powder after anodization.

  18. Periodical getter cleaning of the gas environment inside a device

    Directory of Open Access Journals (Sweden)

    V. A. Matveev

    2014-01-01

    Full Text Available Recent years have seen extensive development of new types of electro-mechanical devices, intended for use as sensors rotations and angular rates. They all tend to comprise any type of mechanical resonators which are sensitive to fluctuations in the rotational motion. Achievement of stable characteristics and high performance of these devices requires maintaining of the vacuum inside them at the level of 1…10-4 Pa. In the technology of assembly of such devices different adhesives and sealants are often used. They allow to connect easily and safely parts of different materials and eliminate the risk of thermal or mechanical damage, but at the same time adhesive joints have significant outgassing worsening vacuum inside the device. Although today's global industry produces a large number of different types of adhesives with low outgassing (see, for example, the NASA database [1], the problem of providing vacuum in devices with internal adhesive joints remains unresolved until the end. The literature contains data describing the outgassing of some heat-resistant adhesives [2-7], which show that even small residual outgassing significantly worsens vacuum inside the device. The diagram (Fig. 1 evaluated according to the data presented in [6, 7] shows the composition and the partial pressure of gas components at ambient temperature inside the device comprising the adhesive joints (adhesive EPO-TEK H74UNF, after 10 years of its operation. In computations, the area of adhesive joints was S=1 мм 2 , the inner volume was V=100 см3 , relative outgassing rates were equal to [3]: ν(H2O=6.9∙10-6 Pa∙m/s; ν(СО2=8.9∙10-8 Pa∙m/s; ν(СO=1.7∙10-7 Pa∙m/s; ν(СxHy=10-6 Pa∙m/s; ν(H2=1.2∙10-6 Pa∙m/s; ν(O2=1.3∙10-10 Pa∙m/s; ν(HF=1.4∙10-8 Pa∙m/s. As can be seen from the diagram, within 10 years after manufacture the total pressure inside the device increases to about 30 Pa, which inevitably leads to the loss of its functionality

  19. Proximal Probes Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Proximal Probes Facility consists of laboratories for microscopy, spectroscopy, and probing of nanostructured materials and their functional properties. At the...

  20. Screening protocol for iodine-specific getters in YMP-related invert applications.

    Energy Technology Data Exchange (ETDEWEB)

    Krumhansl, James Lee; Pless, Jason; Chwirka, J. Benjamin

    2006-07-01

    This document defines a standardized screening protocol for use in developing iodine ''getters'' for placement in the proposed YMP-repository invert. The work was funded by the US Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM), Office of Science and Technology International (S&T) during 2004-2005. First, the likely environmental conditions in the invert are reviewed as a basis for defining the thermal and geochemical regimes in which a getter must function. These considerations, then, served as the basis for laying out a hierarchy of materials screening tests (Table 1). An experimental design for carrying out these screening tests follows next. Finally, the latter half of the document develops methods for preparing test solutions with chemistries that relate to various aspects of the YMP-repository environment (or, at least to such representations as were available from program documents late in 2004). Throughout the document priority was given to defining procedures that would quickly screen out unpromising candidate materials with a minimum amount of labor. Hence, the proposed protocol relies on batch tests over relatively short times, and on a hierarchy of short pre-test conditioning steps. So as not to repeat the mistakes (and frustrations) encountered in the past (notably in preparing WIPP test brines) particular care was also given to developing standardized test solution recipes that could be prepared easily and reproducibly. This document is principally intended for use as a decision-making tool in evaluating and planning research activities. It is explicitly NOT a roadmap for qualifying getters for actual placement in the repository. That would require a comprehensive test plan and a substantial consensus building effort. This document is also not intended to provide a complete list of all the tests that individuals may wish to carry out. Various materials will have their own peculiar concerns that

  1. Loading of a Rb magneto-optic trap from a getter source

    Science.gov (United States)

    Rapol, Umakant D.; Wasan, Ajay; Natarajan, Vasant

    2001-08-01

    We study the properties of a Rb magneto-optic trap loaded from a commercial getter source. The source provides a large flux of atoms for the trap along with the capability of rapid turn off necessary for obtaining long trap lifetimes. We have studied the trap loading at two different values of background pressure to determine the cross section for Rb-N2 collisions to be 3.5(4)×10-14 cm2 and that for Rb-Rb collisions to be of order 3×10-13 cm2. At a background pressure of 1.3×10-9 torr, we load more than 108 atoms into the trap with a time constant of 3.3 s. The 1/e lifetime of trapped atoms is 13 s limited only by background collisions.

  2. Distributed Non-evaporable Getter pumps for the storage ring of the APS

    Energy Technology Data Exchange (ETDEWEB)

    Dortwegt, R.; Benaroya, R.

    1993-07-01

    A pair of distributed Non-evaporable Getter (NeG) strip assemblies is installed in each of 236 aluminum vacuum chambers of the 1104-m storage ring of the Advanced Photon Source. Distributed pumping is provided to remove most of the gas resulting from photon-stimulated desorption occurring along the outer walls of the chambers. This is an efficient way of pumping because conductance is limited along the beam axis. The St-707 NeG strips are conditioned at 450{degree}C for 45 min. with 42 A. Base pressures obtained are also as low as 4 {times} 10{sup 11} Torr. The NeG strip assemblies are supported by a series of electrically isolated, 125-mm-long, interlocking stainless steel carriers. These unique interlocking carrier elements provide flexibility along the vacuum chamber curvature (r=38.96 m) and permit removal and installation of assemblies with as little as 150 mm external clearance between adjacent chambers.

  3. Electron spectroscopy study of the oxidation of a Zr-Fe getter. Pt. 1; Core spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Bastianon, A.; Braicovich, L.; Michelis, B. de (Ist. di Fisica, Politecnico di Milano (Italy))

    1992-03-15

    The room temperature oxidation (up to 2500 L) of a Zr-Fe getter having Zr{sub 2}Fe as majority component (80% of the total volume) is studied with X-ray photoemission (h{nu}=1253.6 eV) and Auger spectroscopy. Core photoemission (Zr 3d, Fe 2p and O 1s) and ZrM{sub 45}N{sub 23}V Auger spectra have been measured for increasing oxygen exposure. The oxidation proceeds via an interface suboxide up to an oxide having about the same chemical shift as ZrO{sub 2} (4.3 eV). At saturation the reacted overlayer is about 6 monolayers thick. A small fraction of Fe is found in the reacted overlayer (concentration around 15% of the that of the substrate). (orig.).

  4. Intrinsic gettering of Czochralski silicon annealed in argon and nitrogen atmosphere

    Science.gov (United States)

    Shui, Qiong; Yang, Deren; Li, Liben; Pi, Xiaodong; Que, Duanlin

    2001-12-01

    The intrinsic gettering of nitrogen-doped Czochralski (NCZ) and nitrogen-undoped Czochralski (CZ) silicon annealed in argon and nitrogen ambient has been investigated by three-step annealing. It is found that the threshold oxygen concentration for effective precipitation is about 4.8×10 17 cm -3 at 1150°C. No difference of the denuded zone (DZ) width between the NCZ and CZ silicon samples was found when they were annealed in argon ambient. However, a few of small etching pits occurred in the DZ region for both of NCZ and CZ silicon samples. It is suggested that nitrogen could diffuse into the DZ region and form N-O complexes as heterogeneous nuclei, which can enhance oxygen precipitates, when the samples were annealed in nitrogen ambient.

  5. Neutron intrinsic gettering on electrical property of gate oxynitride in metal-oxide-Si capacitor

    Science.gov (United States)

    Chang-Liao, Kuei-Shu; Yi, Nan-Kuang; Huang, Jenn-Gwo

    2000-05-01

    The electrical property of gate oxynitride in metal-oxide-Si capacitor is improved by a neutron-intrinsic-gettering (NIG) treatment. This improvement can be attributed to the reduction of nitrogen concentration in the oxynitride bulk and the decrease of interstitial oxygen defect in the silicon. For the oxynitride formed using NIG-treated Si substrate, the breakdown electric field is increased and the reliability is improved. A significant improvement of electrical property in gate oxynitride is observed by a NIG treatment including a fast neutron dose of 7.2×1016cm-2 and an anneal at 1100 °C for 6 h. This NIG treatment would be promising for the improvement of electrical properties in gate oxynitrides.

  6. Evaluation of RTV as a Moldable Matrix When Combined With Molecular Sieve and Organic Hydrogen Getter

    Energy Technology Data Exchange (ETDEWEB)

    Knight, J. A.

    2011-12-01

    This work was undertaken in an effort to develop a combined RTV 615/3Å molecular sieve/DEB molded component. A molded RTV 615/3Å molecular sieve component is currently in production, and an RTV 615/DEB component was produced in the past. However, all three materials have never before been combined in a single production part, and this is an opportunity to create a new component capable of being molded to shape, performing desiccation, and hydrogen gettering. This analysis looked at weapons system parameters and how they might influence part design. It also looked at material processing and how it related to mixing, activating a dessicant, and hydrogen uptake testing.

  7. Workshop on development of radionuclide getters for the Yucca Mountain waste repository: proceedings.

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Robert Charles; Lukens, Wayne W. (Lawrence Berkeley National Laboratory)

    2006-03-01

    The proposed Yucca Mountain repository, located in southern Nevada, is to be the first facility for permanent disposal of spent reactor fuel and high-level radioactive waste in the United States. Total Systems Performance Assessment (TSPA) analysis has indicated that among the major radionuclides contributing to dose are technetium, iodine, and neptunium, all of which are highly mobile in the environment. Containment of these radionuclides within the repository is a priority for the Yucca Mountain Project (YMP). These proceedings review current research and technology efforts for sequestration of the radionuclides with a focus on technetium, iodine, and neptunium. This workshop also covered issues concerning the Yucca Mountain environment and getter characteristics required for potential placement into the repository.

  8. Effects of getter annealing and codoping of iron and zinc in yttrium-barium cuprates

    Energy Technology Data Exchange (ETDEWEB)

    O' Brien, J.R.; Oesterreicher, H. (Univ. of California, San Diego, La Jolla, CA (United States)); Taylor, R.D. (Los Alamos National Lab., NM (United States). Physics Division)

    1994-09-01

    This study explores issues connected with the complex structural and electronic behavior of partly substituted YBa[sub 2](Cu[sup 1[minus]x[minus]z]Fe[sub x]Zn[sub z])[sub 3]O[sub y] when given special redox sequencing over varying times. For z = 0 and x = 0.03 conventional oxygenated slow cooling preparations (OP) yield tetragonal materials with [Tc][sub mid] = 59K. Getter annealing procedures using Gd to control the extent of reduction to y = 6.1 at 1000K for 4 days followed by reoxidation at 700K for 1 hour yield orthorhombic materials with [Tc][sub mid] = 68K and improved superconducting volume fractions. The results are in line with expectations for the presence of ordered atomic size Fe clusters with these reducing preparations (RP). This redox sequence also reduces the paramagnetic Curie temperature from [Theta][sub P] = [minus]35K to [Theta][sub P] = [minus]51K for z = 0, hinting at higher cluster Neel temperatures. When the getter annealed specimen is air annealed for prolonged times (50h) at 673K, a broader [Tc] transition develops and a slight decrease in the orthorhombic splitting is observed. This demonstrates that small rearrangements from properties of RP to OP are possible even at these low temperatures. Codoping to x = 0.03, z = 0.01 results in drastic reductions to [Tc][sub mid] = 31K for OP, beyond the one expected from individual contributions, while structural parameters do not change noticeably. This synergistic effects is also reflected in [Theta][sub P] and may have to do with a large proportion of Fe occupying the Cu(2) site. Results are discussed within models of inhomogeneous M distributions and oxygen chain order.

  9. Hemodynamic and Mechanical Properties of the Proximal Aorta in Young and Middle-Aged Adults With Isolated Systolic Hypertension: The Dallas Heart Study.

    Science.gov (United States)

    Yano, Yuichiro; Neeland, Ian J; Ayers, Colby; Peshock, Ronald; Berry, Jarett D; Lloyd-Jones, Donald M; Greenland, Philip; Mitchell, Gary F; Vongpatanasin, Wanpen

    2017-07-01

    The aim of this study was to assess characteristic impedance (Z c ) of the proximal aorta in young and middle-aged individuals with isolated systolic hypertension (ISH). Z c is an index of aortic stiffness relative to aortic size. In the Dallas Heart Study, 2001 untreated participants 18 to 64 years of age (mean age: 42.3 years; 44% black race) were divided into the following groups based on office blood pressure (BP) measurements: (1) optimal BP (systolic BP [SBP] hypertension (SBP hypertension (SBP ≥140 mm Hg and DBP ≥90 mm Hg; n=178). Z c , aortic arch pulse wave velocity, and minimum ascending aortic size were quantified using cardiovascular magnetic resonance. In multivariable-adjusted linear models, Z c was highest in the ISH group compared with the optimal BP, isolated diastolic hypertension, or systolic-diastolic hypertension groups (103.2±4.0 versus 68.3±2.1, 75.4±6.0, and 88.9±4.8 dyne*seconds/cm 5 , respectively; all P hypertension, or systolic-diastolic hypertension groups (6.3±0.3 versus 4.3±0.1, 4.4±0.4 and 5.5±0.3 m/s, respectively; all P 0.2). Results were similar in a subgroup of 1551 participants 18 to 49 years of age. In a multiracial population-based sample, we found evidence of a mismatch between proximal aortic stiffness and diameter in young and middle-aged adults with ISH. © 2017 American Heart Association, Inc.

  10. Linked opening angle and histological and mechanical aspects of the proximal pulmonary arteries of healthy and pulmonary hypertensive rats and calves

    OpenAIRE

    Tian, Lian; Lammers, Steven R.; Kao, Philip H.; Reusser, Mark; Stenmark, Kurt R.; Hunter, Kendall S.; Qi, H. Jerry; Shandas, Robin

    2011-01-01

    Understanding how arterial remodeling changes the mechanical behavior of pulmonary arteries (PAs) is important to the evaluation of pulmonary vascular function. Early and current efforts have focused on the arteries' histological changes, their mechanical properties under in vitro mechanical testing, and their zero-stress and no-load states. However, the linkage between the histology and mechanical behavior is still not well understood. To explore this linkage, we investigated the geometry, r...

  11. What kind of memory has evolution wrought? Introductory article for the special issue of memory: adaptive memory: the emergence and nature of proximate mechanisms.

    Science.gov (United States)

    Otgaar, Henry; Howe, Mark L

    2014-01-01

    It is without question that our memory system evolved through a process of natural selection. However, basic research into the evolutionary foundations of memory has begun in earnest only recently. This is quite peculiar as the majority, perhaps even all, of memory research relates to whether memory is adaptive or not. In this Special Issue of Memory we have assembled a variety of papers that represent the cutting edge in research on the evolution of memory. These papers are centred on issues about the ultimate and proximate explanations of memory, the development of the adaptive functions of memory, as well as the positive consequences that arise from the current evolutionary form that our memory has taken. In this introductory article we briefly outline these different areas and indicate why they are vital for a more complete theory of memory. Further we argue that, by adopting a more applied stance in the area of the evolution of memory, one of the many future directions in this field could be a new branch of psychology that addresses questions in evolutionary legal psychology.

  12. Improved Hydrogen Gas Getters for TRU Waste Transuranic and Mixed Waste Focus Area - Phase 2 Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Stone, Mark Lee

    2002-04-01

    Alpha radiolysis of hydrogenous waste and packaging materials generates hydrogen gas in radioactive storage containers. For that reason, the Nuclear Regulatory Commission (NRC) limits the flammable gas (hydrogen) concentration in the Transuranic Package Transporter-II (TRUPACT-II) containers to 5 vol% of hydrogen in air, which is the lower explosion limit. Consequently, a method is needed to prevent the build up of hydrogen to 5 vol% during the storage and transport of the TRUPACT-II containers (up to 60 days). One promising option is the use of hydrogen getters. These materials scavenge hydrogen from the gas phase and irreversibly bind it in the solid phase. One proven getter is a material called 1,4-bis (phenylethynyl) benzene, or DEB. It has the needed binding rate and capacity, but some of the chemical species that might be present in the containers could interfere with its ability to remove hydrogen. This project is focused upon developing a protective polymeric membrane coating for the DEB getter material, which comes in the form of small, irregularly shaped particles. This report summarizes the experimental results of the second phase of the development of the materials.

  13. Electron stimulated molecular desorption of a non-evaporable Zr-V-Fe alloy getter at room temperature

    CERN Document Server

    Le Pimpec, Frederic; Laurent, Jean Michel

    2002-01-01

    Electron stimulated molecular desorption (ESD) from a non-evaporable getters (NEG) St 707 registered trademark (SAES Getters trademark ) sample after conditioning and after saturation with isotopic carbon monoxide (cf. nomenclature in Handbook of Chemistry and Physics, CRC Press, 1994), **1**3C**1**8O, has been studied on a laboratory setup. Measurements were performed using an electron beam of 300 eV kinetic energy, with an average electron intensity of 1.6 multiplied by 10**1**5 electrons s**-**1. The electrons were impinging on the 15 cm **2 target surface at perpendicular incidence. It is found that the desorption yields eta (molecules/electron) of the characteristic gases in an UHV system (hydrogen, methane, water, carbon monoxide, carbon dioxide) for a fully activated NEG as well as for a NEG fully saturated with **1**3C**1**8O are lower than for OFHC copper baked at 120 degree C. A small fraction only of the gas which is required to saturate the getter surface can be re-desorbed and thus appears to be ...

  14. Capacitive proximity sensor

    Science.gov (United States)

    Kronberg, James W.

    1994-01-01

    A proximity sensor based on a closed field circuit. The circuit comprises a ring oscillator using a symmetrical array of plates that creates an oscillating displacement current. The displacement current varies as a function of the proximity of objects to the plate array. Preferably the plates are in the form of a group of three pair of symmetric plates having a common center, arranged in a hexagonal pattern with opposing plates linked as a pair. The sensor produces logic level pulses suitable for interfacing with a computer or process controller. The proximity sensor can be incorporated into a load cell, a differential pressure gauge, or a device for measuring the consistency of a characteristic of a material where a variation in the consistency causes the dielectric constant of the material to change.

  15. Neighborhoods and manageable proximity

    Directory of Open Access Journals (Sweden)

    Stavros Stavrides

    2011-08-01

    Full Text Available The theatricality of urban encounters is above all a theatricality of distances which allow for the encounter. The absolute “strangeness” of the crowd (Simmel 1997: 74 expressed, in its purest form, in the absolute proximity of a crowded subway train, does not generally allow for any movements of approach, but only for nervous hostile reactions and submissive hypnotic gestures. Neither forced intersections in the course of pedestrians or vehicles, nor the instantaneous crossing of distances by the technology of live broadcasting and remote control give birth to places of encounter. In the forced proximity of the metropolitan crowd which haunted the city of the 19th and 20th century, as well as in the forced proximity of the tele-presence which haunts the dystopic prospect of the future “omnipolis” (Virilio 1997: 74, the necessary distance, which is the stage of an encounter between different instances of otherness, is dissipated.

  16. Ammonia transport in the proximal tubule.

    Science.gov (United States)

    Hamm, L L; Simon, E E

    1990-01-01

    The transport of ammonia in the proximal tubule is a complex interaction of a number of processes. Ammonia transport in the proximal tubule is clearly bidirectional; ammonia is secreted into the early proximal tubule lumen, but later in the proximal tubule, efflux out of the lumen may result in net ammonia reabsorption. Two mechanisms of ammonia transport have clearly been established: NH3 diffusion and NH4+ transport on the Na(+)-H+ exchanger. The relative contribution of these pathways to ammonia transport is still unsettled. Other pathways for ammonia transport, particularly NH4+ efflux out of the lumen, may be important as well. A variety of factors may modulate ammonia transport: plasma, cell and luminal pH, luminal flow rate, luminal potassium, and angiotensin II. Each of these factors also alters ammonia production rates and in most circumstances, ammonia transport appears to follow ammonia production rates.

  17. Atrofia muscular proximal familiar

    Directory of Open Access Journals (Sweden)

    José Antonio Levy

    1962-09-01

    Full Text Available Os autores relatam dois casos de atrofia muscular proximal familiar, moléstia caracterizada por déficit motor e atrofias musculares de distribuição proximal, secundárias a lesão de neurônios periféricos. Assim, como em outros casos descritos na literatura, foi feito inicialmente o diagnóstico de distrofia muscular progressiva. O diagnóstico correto foi conseguido com auxílio da eletromiografia e da biopsia muscular.

  18. Tritium storage plant based on a combination of St707 and St737 getter alloy beds for high field fusion machines

    Energy Technology Data Exchange (ETDEWEB)

    Bonizzoni, G.; Gervasini, G.; Ghezzi, F. (Consiglio Nazionale delle Ricerche, Milan (Italy). Lab. di Fisica del Plasma); Conte, A. (Milan Univ. (Italy). Ist. di Fisica); Gatto, G.; Rigamonti, M. (Consorzio IGNITOR, Turin (Italy))

    1990-01-01

    Thermonuclear fusion machines (which will be operated with D-T mixtures) should provide the tritium storage and supply systems with safety conditions. In order to prevent possible accidents, with a large release of tritium, it must be trapped in solid and reversible solution forms by absorption beds. Moreover, residual gaseous form tritium in the pipelines, and permeation through the primary containment system, must be minimized. For storage, transfer, injection and recovery, a suitable system can be designed which uses metallic getter beds. Reversible solid solutions by tritium sorption are formed with low residual partial pressure, and re-emission by heating at low temperatures, which results in the reduction of permeation. This work shows the possibility of the use of a combination of two Zr-V-Fe getter beds with different alloy compositions as an alternative to the usual uranium beds. In particular, the characterization of the new St737 getter alloy is carried out. Advantages of the combination of the new getter with the well-known St707 getter alloy are presented. (author).

  19. [Experimental proximal carpectomy. Biodynamics].

    Science.gov (United States)

    Kuhlmann, J N

    1992-01-01

    Proximal carpectomy was performed in 10 fresh cadavre wrists. Dynamic x-rays were taken and the forces necessary to obtain different movements before and after the operation were measured. Comparison of these parameters clearly defines the advantages and limitations of carpectomy and indicates the reasons.

  20. Proximate Analysis of Coal

    Science.gov (United States)

    Donahue, Craig J.; Rais, Elizabeth A.

    2009-01-01

    This lab experiment illustrates the use of thermogravimetric analysis (TGA) to perform proximate analysis on a series of coal samples of different rank. Peat and coke are also examined. A total of four exercises are described. These are dry exercises as students interpret previously recorded scans. The weight percent moisture, volatile matter,…

  1. Proximal Tibial Bone Graft

    Science.gov (United States)

    ... the Big Toe Ailments of the Smaller Toes Diabetic Foot Treatments Currently selected Injections and other Procedures Treatments ... from which the bone was taken if the foot/ankle surgeries done at the same time allow for it. ... problems after a PTBG include infection, fracture of the proximal tibia and pain related ...

  2. Non-evaporable getter investigation at the National Synchrotron Light Source

    Energy Technology Data Exchange (ETDEWEB)

    Halama, H.J.; Guo, Y.

    1990-01-01

    We report H{sub 2}, CO and CO{sub 2} pumping speed measurements on a linear pump using NEG strip St 707 (Saes Getters Inc) as a function of both absorbed gases and number of activations. To simulate the conditions of an operating storage ring a gas mixture of 50% H{sub 2}, 35% CO and 15% CO{sub 2} is used in all measurements. Initial measured pumping speeds of >450{ell} m {sup {minus}1} s{sup {minus}1} decrease to 200 and 100{ell} m{sup {minus}1} s{sup {minus}1} for H{sub 2} and CO, respectively, after 70 air exposures. A further drop to 50{ell} m{sup {minus}1} s{sup {minus}1} for CO occurs at CO loading of 1 {times} 10{sup {minus}2} Torr {ell} m{sup {minus}1}. CO{sub 2} and CO pumping speeds are about the same. The photon stimulated desorption (PSD) for both baked and activated strips is an order of magnitude lower than that for stainless steel. 7 refs., 7 figs.

  3. An In-situ XPS study of non-evaporable ZrVFe getter material

    Directory of Open Access Journals (Sweden)

    Jang-Hee Yoon

    2010-03-01

    Full Text Available To investigate the temperature dependence of a synthesized Zr57V36Fe7 non evaporable vacuum getter material, the in-situ temperature x-ray photoelectron spectroscopy (in-situ XPS were performed in a UHV chamber equipped with a programmable ceramic sample heating system. The surface and bulk composition of Zr, V, and Ti was determined in the as-received state and after in-situ heating from 50℃ to 600℃ at 50℃per step. The peak fitting results for O 1s, C 1s, Zr 3d, V 2p, and Fe 2p high resolution spectra were acquired and the chemical state of the elements were then characterized as a function of heating temperature. In-situ XPS investigations showed that oxide reduction proceeds via the formation of sub-oxides with the simultaneous formation of carbides in the region near the surface. The activation temperature for completion of the Zr57V36Fe7 alloy, which approximates the XPS peaks changed from oxide to metallic state(20 % of the oxide peak, was determined around 480℃. The findings suggest that the in-situ temperature XPS technique is a useful analytical tool for evaluating activation characteristics of NEG materials.

  4. A thermodynamic model for analyzing alkali getter materials; Ein thermodynamisches Modell zur Bewertung von Alkaligettermaterialien

    Energy Technology Data Exchange (ETDEWEB)

    Bause, T.; Meyer, B.

    2001-07-01

    In the context of the ''Druckflamm'' project, TU Bergakademie Freiberg University (Institut fuer Energieverfahrenstechnik und Chemieingenieurwesen) generates thermodynamic models for optimizing the processes of coal gasification under pressure. The investigations are aimed at reducing the concentrations of volatile alkali metal compounds in the flue gas of the DKSF process. Combustion takes place at 1500-1700 C, i.e. the coal ash will be liquid and has a high potential for bonding of volatile alkali metals. The non-separated alkaline substances must be removed in a secondary retention stage above the envisaged gas turbine inlet temperature of 1200 , e.g. by means of getter materials for which a thermodynamic equilibrium model is presented here. [German] Im Rahmen des Verbundprojektes ''Druckflamm'' erstellt das Institut fuer Energieverfahrenstechnik und Chemieingenieurwesen der TU Bergakademie Freiberg thermodynamischer Modelle zur Optimierung einzelner Prozesstufen der Druckkohlenstaubfeuerung (DKSF). Forschungsziel ist die Minderung des Gehaltes an fluechtigen Alkalimetallverbindungen im Rauchgas des DKSF-Prozesses. Da die Verbrennung bei 1500 C bis 1700 C stattfindet, liegt die Kohleasche fluessig vor und bietet ein hohes Einbindungspotential fuer fluechtige Alkalimetalle. Die nicht abgeschiedenen Alkalien muessen durch eine sekundaere Alkalirueckhaltung oberhalb der angestrebten Gasturbineneintrittstemperatur von 1200 C entfernt werden. Hierzu bietet sich der Einsatz von Gettermaterialien an, fuer die ein thermodynamisches Gleichgewichtsmodell vorgestellt werden soll. (orig.)

  5. Experimental investigation of the efficiency of HTO reduction by Zr-Fe-Mn getter alloy

    Energy Technology Data Exchange (ETDEWEB)

    Ghezzi, F.; Shmayda, W.T.; Bonizzoni, G. [Istituto di Fisica del Plasma-CNR, Milano (Italy)

    1997-01-01

    Tritium gas handling involves the production of tritiated water, which is 10000 times more hazardous than tritium gas. If tritium emission to the environment must be minimized, the need to process tritiated water and recover the chemically bound tritium appears clear. Facilities for processing tritiated water produced in fission reactors are already available, while facilities for a deuterium-tritium fusion machine are under development. However, these facilities are intended for large-scale applications and are neither practical nor economical for small-scale applications. HTO vapor reduction to HT over a hot metal getter other than uranium offers a simple, safe, and economical solution. A high alloy capacity and conversion rate combined with a low tritium residual inventory in the exhausted alloy make this method attractive. An experimental investigation of the efficiency of reducing HTO by a Zr-Fe-Mn alloy is presented. The results, obtained by three independent diagnostics (stripper set, ionization chambers, and mass spectrometry), show that for gas residence times > 1 s and alloy temperature > 400{degree}C, a conversion efficiency exceeding 90% is achievable. Specific conversion rates > 0.1 {mu}mol/s.g{sup -1} are observed during te alloy usage, while a capacity of the alloy, measured as an oxygen-to-alloy mole ratio, > 2.6 has been measured. 50 refs., 21 figs., 5 tabs.

  6. Intrinsic Gettering in Nitrogen-Doped and Hydrogen-Annealed Czochralski-Grown Silicon Wafers

    Science.gov (United States)

    Goto, Hiroyuki; Pan, Lian-Sheng; Tanaka, Masafumi; Kashima, Kazuhiko

    2001-06-01

    The properties of nitrogen-doped and hydrogen-annealed Czochralski-grown silicon (NHA-CZ-Si) wafers were investigated in this study. The quality of the subsurface was investigated by monitoring the generation lifetime of minority carriers, as measured by the capacitance-time measurements of a metal oxide silicon capacitor (MOS C-t). The intrinsic gettering (IG) ability was investigated by determining the nickel concentration on the surface and in the subsurface as measured by graphite furnace atomic absorption spectrometry (GFAAS) after the wafer was deliberately contaminated with nickel. From the results obtained, the generation lifetimes of these NHA-CZ-Si wafers were determined to be almost the same as, or a little longer than those of epitaxial wafers, and the IG ability was proportional to the total volume of oxygen precipitates [i.e., bulk micro defects (BMDs)], which was influenced by the oxygen and nitrogen concentrations in the wafers. Therefore, it is suggested that the subsurface of the NHA-CZ-Si wafers is of good quality and the IG capacity is controllable by the nitrogen and oxygen concentrations in the wafers.

  7. Risk-based multi-criteria design concept of the ITER SDS getter bed

    Energy Technology Data Exchange (ETDEWEB)

    Yun, S.-H., E-mail: shyun@nfri.re.kr [National Fusion Research Institute, Yusung-gu, Daejeon 305-333 (Korea, Republic of); Kang, H.-G.; Chang, M.H.; Cho, S.; Lee, H.G.; Jung, K.J. [National Fusion Research Institute, Yusung-gu, Daejeon 305-333 (Korea, Republic of); Chung, H. [Korea Atomic Energy Research Institute, Yusung-gu, Daejeon 305-353 (Korea, Republic of); Sohn, S.-H.; Song, K.-M. [Korea Hydro and Nuclear Power Central Research Institute, Yusung-gu, Daejeon 305-343 (Korea, Republic of); Camp, P.; Willms, S.; Glugla, M. [ITER Organization, Route de Vinon-sur-Verdon, 13115 Saint Paul Lez Durance (France)

    2014-10-15

    The main objective of ITER tritium Storage and Delivery System (SDS) is contracted to develop an optimal metal hydride bed that can be reveal the unprecedented fueling performance for the Tokamak. One function of the hydride bed is to keep safety requirements in terms of confinement of tritium. The hydride material for storing the deuterium and tritium fuelling gases is being made narrow with depleted uranium (DU) by its good performance. DU also has its own uncertainties, however, in applying it to realize the getter bed system having an all-round capability, especially in aspect of safety. This paper deals with from bed design target to the design variables in terms of comparison of risk-based multi-criteria using HAZOP (risk matrix) analysis. In analysis of the risks, important variables that denotes safety-effective, or cost-effective, or maintainability-effective, or manufacturability-effective are sometimes mutually interrelated with each other. As a conclusion the authors could recommend the way to concentrate and minimize the bed design variables with most meaningful risk-containing components that can be applied to increase the performance of hydride bed. It needs, however, that further study of comparison of risk analyses should be proceeded to complete the hydride bed design.

  8. Combined Impact of Heterogeneous Lifetime and Gettering on Solar Cell Performance

    Energy Technology Data Exchange (ETDEWEB)

    Morishige, A.; Wagner, H.; Hofstetter, J.; Avci, I.; Canizo, C.; Buonassisi, T.

    2015-03-23

    We couple numerical process and device simulations to provide a framework for understanding the combined effects of as-grown wafer impurity distribution, processing parameters, and solar cell architecture. For this study, we added the Impurity-to-Efficiency simulator to Synopsys’ Sentaurus Process software using the Alagator Scripting Language. Our results quantify how advanced processing can eliminate differences in efficiency due to different as-grown impurity concentrations and due to different area fractions of defective wafer regions. We identify combinations of as-grown impurity distributions and process parameters that produce solar cells limited by point defects and those that are limited by precipitated impurities. Gettering targeted at either point defect or precipitate reduction can then be designed and applied to increase cell efficiency. We also visualize the post-processing iron and total recombination distributions in 2D maps of the wafer cross-section. PV researchers and companies can input their initial iron distributions and processing parameters into our software and couple the resulting process simulation results with a solar cell device design of interest to conduct their own analyses. The Alagator scripts we developed are freely available online at http://pv.mit.edu/impurity-to-efficiency-i2e-simulator-for-sentaurus-tcad/.

  9. Yucca mountain project getter program results(year 1):I-129 and other anions of concern.

    Energy Technology Data Exchange (ETDEWEB)

    Krumhansl, James Lee; Pless, Jason; Chwirka, J. Benjamin

    2006-07-01

    Although high level nuclear wastes (HLW) contain a daunting array of radioisotopes, only a restricted number are long-lived enough to be problematic, and of these many are either effectively insoluble or are likely to be scavenged from solution by minerals indigenous to all aquifers. Those few constituents likely to travel significant distances through aquifers either form colloids (and travel as particulates) or anions--which are not sorbed onto the predominantly negatively charged mineral surfaces. Iodine ({sup 129}I) is one such constituent and may travel as either iodide (I{sup -}) or iodate (IO{sub 3}{sup -}) depending on whether conditions are mildly reducing or oxidizing. Conventionally, {sup 99}Tc (traveling as TcO{sub 4}{sup -}) is regarded as being of greater concern since it is both more abundant and has a shorter half life (e.g., has a higher specific activity). However, it is unclear whether TcO{sub 4}{sup -} will ever actually form in the mildly reducing environments thought likely within degrading HLW canisters. Instead, technetium may remain reduced as highly insoluble Tc(IV), in which case {sup 129}I might become a significant risk driver in performance assessment (PA) calculations. In the 2004-2005 time frame the US Department of Energy (DOE)--Office of Civilian Radioactive Waste Management (OCRUM), Office of Science and Technology International (S&T) funded a program to identify ''getters'' for possible placement in the invert beneath HLW packages in the repository being planned by the Yucca Mountain Project (YMP). This document reports on progress made during the first (and only) year of this activity. The problem is not a new one and the project did not proceed in a complete vacuum of information. Potential leads came from past studies directed at developing anion getters for a near surface low-level waste facility at Hanford, which suggested that both copper-containing compounds and hydrotalcite-group minerals might be

  10. Development of low-cost, high-performance non-evaporable getter (NEG) pumps

    Energy Technology Data Exchange (ETDEWEB)

    Mase, Kazuhiko, E-mail: mase@post.kek.jp [Institute of Materials Structure Science, KEK, 1-1 Oho, Tsukuba 305-0801 (Japan); SOKENDAI (The Graduate University for Advanced Studies), 1-1 Oho, Tsukuba 305-0801 (Japan); Tanaka, Masato [Faculty of Engineering, Chiba University, 1-33 Yayoi-cho, Inage-ku 263-8522 (Japan); Ida, Naoya [Faculty of Science and Technology, Hirosaki University, 1 Bunkyocho, Hirosaki 036-8560 (Japan); Kodama, Hiraku [Faculty of Engineering, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama 240-8501 (Japan); Kikuchi, Takashi [Institute of Materials Structure Science, KEK, 1-1 Oho, Tsukuba 305-0801 (Japan)

    2016-07-27

    Low-cost, high-performance non-evaporable getter (NEG) pumps were constructed using commercial NEG pills comprising 70 wt% Zr, 24.6 wt% V, and 5.4 wt% Fe, a conflat flange with an outer diameter of 70, 152, or 203 mm (DN 40 CF, DN 100 CF, and DN 160 CF, respectively), and a tantalum heater. After activation at 400 °C for 30 min, the pumping speeds of a DN 40 CF NEG pump measured with the orifice method were 47–40, 8–6, 24–17, and 19–15 L/s for H{sub 2}, N{sub 2}, CO, and CO{sub 2} gasses, respectively. NEG pumps using DN 100 CF and DN 160 CF were also developed, and their pumping speeds are estimated. These NEG pumps are favorable alternatives to sputtering ion pumps in VSX beamlines because they do not produce hydrocarbons except during the activation period. The NEG pumps can also be used for accelerators, front ends, end stations, and differential pumping systems.

  11. Complete Initial Scoping Tests on the Incorporation of Novel Loaded Iodine Getters into GCM.

    Energy Technology Data Exchange (ETDEWEB)

    Nenoff, Tina M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Garino, Terry J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Croes, Kenneth James [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-08-18

    This study encompasses initial scoping tests on the incorporation of a novel iodine loaded getter material into the Sandia developed low temperature sintering glass ceramic material (GCM) waste form. In particular, we studied the PNNL Ag-I-Aerogel. Optical microscopy indicates inhomogenous samples based on particle sizes and variations in color (AgI vs Ag/AgO on silica). TGA/MS data when heated in air indicates loss of iodine and organics (CO2) between 250-450°C a total of ~15wt% loss, with additional / small iodine loss when during 550°C hold for 1 hr. TGA/MS data when heated in N2 indicates less organic and slightly less iodine loss below 550°C, with no loss of iodine in 550°C 1 hour hold. Furthermore, a substantial mass loss of sulfur containing compounds is observed (m/e of 34 and 36) between 150 – 550°C in both air and N2 sintering atmospheres. In an effort to capture iodine lost to volatilization during heating (at temps below glass sintering temperature of 550°C), we added 5 wt% Ag flake to the AgIaerogel. Resulting data indicates the iodine is retained with the addition of the Ag flake, resulting in only a small iodine loss (< 1wt%) at ~350°C. No method of curtailing loss of sulfur containing compounds due to heating was successful in this scoping study.

  12. Mechanisms of mono- and poly-ubiquitination: Ubiquitination specificity depends on compatibility between the E2 catalytic core and amino acid residues proximal to the lysine

    Directory of Open Access Journals (Sweden)

    Sadowski Martin

    2010-08-01

    Full Text Available Abstract Ubiquitination involves the attachment of ubiquitin to lysine residues on substrate proteins or itself, which can result in protein monoubiquitination or polyubiquitination. Ubiquitin attachment to different lysine residues can generate diverse substrate-ubiquitin structures, targeting proteins to different fates. The mechanisms of lysine selection are not well understood. Ubiquitination by the largest group of E3 ligases, the RING-family E3 s, is catalyzed through co-operation between the non-catalytic ubiquitin-ligase (E3 and the ubiquitin-conjugating enzyme (E2, where the RING E3 binds the substrate and the E2 catalyzes ubiquitin transfer. Previous studies suggest that ubiquitination sites are selected by E3-mediated positioning of the lysine toward the E2 active site. Ultimately, at a catalytic level, ubiquitination of lysine residues within the substrate or ubiquitin occurs by nucleophilic attack of the lysine residue on the thioester bond linking the E2 catalytic cysteine to ubiquitin. One of the best studied RING E3/E2 complexes is the Skp1/Cul1/F box protein complex, SCFCdc4, and its cognate E2, Cdc34, which target the CDK inhibitor Sic1 for K48-linked polyubiquitination, leading to its proteasomal degradation. Our recent studies of this model system demonstrated that residues surrounding Sic1 lysines or lysine 48 in ubiquitin are critical for ubiquitination. This sequence-dependence is linked to evolutionarily conserved key residues in the catalytic region of Cdc34 and can determine if Sic1 is mono- or poly-ubiquitinated. Our studies indicate that amino acid determinants in the Cdc34 catalytic region and their compatibility to those surrounding acceptor lysine residues play important roles in lysine selection. This may represent a general mechanism in directing the mode of ubiquitination in E2 s.

  13. Proximal femoral fractures

    DEFF Research Database (Denmark)

    Palm, Henrik; Teixidor, Jordi

    2015-01-01

    -displaced femoral neck fractures and prosthesis for displaced among the elderly; and sliding hip screw for stabile- and intramedullary nails for unstable- and sub-trochanteric fractures) but they are based on a variety of criteria and definitions - and often leave wide space for the individual surgeons' subjective...... guidelines for hip fracture surgery and discuss a method for future pathway/guideline implementation and evaluation. METHODS: By a PubMed search in March 2015 six studies of surgical treatment pathways covering all types of proximal femoral fractures with publication after 1995 were identified. Also we...... searched the homepages of the national heath authorities and national orthopedic societies in West Europe and found 11 national or regional (in case of no national) guidelines including any type of proximal femoral fracture surgery. RESULTS: Pathway consensus is outspread (internal fixation for un...

  14. Mechanisms for the proximity between the perspectives of the Shiite jurisprudence and the International Human Rights System regarding Corporal Punishment of Children

    Directory of Open Access Journals (Sweden)

    Seyed Javad Hoseynikhah

    2011-11-01

    Full Text Available One of the challenging issues which families and societies face in rearing and upbringing is how to treat children’s misbehavior In Islamic perspective, especially Shiite jurisprudence, which is considered to be the main source of legislation in the Islamic republic of Iran, in addition to paying special attention to children’s education and their development and happiness, much emphasis has been put on their dignity, being kind to them, their expedience, preventing any harm and injury to them. Also, it is prohibited to punish and abuse them. However, in some cases corporal punishment of children is permissible and permitted because of their expedience. On the contrary, the international human rights system seeks to eliminate the use of all forms of corporal punishment from all societies. Using different types of instruments and documents, it tries to promote this view. It considers corporal punishment as being against the child’s human dignity and physical integrity. Furthermore, sometimes it is considered inhumane, cruel and humiliating. Therefore, initially and apparently, the two approaches appear to be contradictory. Thus, we try to explain the true nature of the two approaches and to provide some solutions for their proximity considering the interests of the society as well as children's expedience, interests, education, rights and development. از جمله‌ی مسائل حسّاس و مهمّ تربیتی که خانواده‌ها و جوامع بشری دچار آن هستند، چگونگی برخورد با اعمال و کردارهای ناروای کودکان است. در دیدگاه اسلامی و به خصوص فقه سترگ شیعه که در کشور ما منبع الهام‌بخش جهت قانونگذاری محسوب می‌گردد، علاوه بر توجّه خاص به امور تربیتی کودکان و رشد و سعادت آنان، بر کرامت کودکان، مهروزی و مصلحت

  15. Proximal humeral fractures

    OpenAIRE

    Mauro, Craig S.

    2011-01-01

    Proximal humeral fractures may present with many different configurations in patients with varying co-morbities and expectations. As a result, the treating physician must understand the fracture pattern, the quality of the bone, other patient-related factors, and the expanding range of reconstructive options to achieve the best functional outcome and to minimize complications. Current treatment options range from non-operative treatment with physical therapy to fracture fixation using percuta...

  16. Impurity gettering by vacancy-type defects in high-energy ion-implanted silicon at Rp /2

    Science.gov (United States)

    Krause-Rehberg, R.; Börner, F.; Redmann, F.

    2000-12-01

    Vacancy-type defects were studied after high-energy self-implantation of Si and subsequent rapid thermal annealing by means of a depth-resolution enhanced positron beam technique. Two different types of open-volume defects were found at a depth of Rp/2 and Rp, respectively. The defect type at Rp/2 is an agglomeration of point defects containing vacancies. This defect getters diffusing copper atoms. The vacancy-type defect observed in a depth of Rp could be connected to the interstitial loops formed there. The positron annihilation parameters suggest that this detected defect is not decorated by diffusing copper atoms.

  17. Comportamento mecânico do terço proximal de fêmures de ratos após período de suspensão pela cauda e exercitação Mechanical behavior of rats' femoral proximal thirds after a period of tail suspension and exercises

    Directory of Open Access Journals (Sweden)

    Marcos Massao Shimano

    2007-01-01

    Full Text Available A remodelação óssea pode ser estimulada por forças mecânicas presentes nas atividades físicas normais. Neste trabalho foi analisado o comportamento mecânico do terço proximal de fêmur de ratas submetidas à suspensão pela cauda e posterior treinamento em esteira. Sessenta e seis ratas da raça Wistar foram usadas. Primeiramente os animais foram criados por noventa dias e divididos em cinco grupos (dois controles e três experimentais. Os animais do grupo Controle I foram sacrificados com 118 dias de idade. No grupo S (suspenso os animais foram suspensos pela cauda por 28 dias e sacrificados. No grupo Controle II os animais foram sacrificados com 139 dias de idade. No grupo S-L (suspenso-liberado as ratas foram liberadas 21 dias após a suspensão. No grupo S-T (suspenso-treinado após o período de suspensão os animais passaram por treinamento em esteira durante 21 dias. Para análise do comportamento mecânico do osso foi aplicada uma força vertical na cabeça femoral até a ruptura. A fratura foi analisada por raios-X. A suspensão causou um decréscimo da força máxima e, o treinamento e a liberação após a suspensão causaram a recuperação das propriedades mecânicas. Mas, o padrão de fratura não apresentou diferença entre os grupos experimentais.Bone remodeling can be stimulated by mechanical forces present in normal physical activities. In the present research, we investigated the mechanical behavior of the proximal femur of rats previously maintained in tail suspension and later, submitted to physical exercise on a treadmill. Sixty-six Wistar rats were used. Firstly, the animals were raised until the age of ninety days and then divided into five groups (two control groups and three experimental groups. The animals allocated to Control I group were killed at 118 days of age. In the S group, the animals were suspended by tail for 28 days. In Control II group, the animals were killed at 139 days of age. In group S

  18. Goal-Proximity Decision-Making

    Science.gov (United States)

    Veksler, Vladislav D.; Gray, Wayne D.; Schoelles, Michael J.

    2013-01-01

    Reinforcement learning (RL) models of decision-making cannot account for human decisions in the absence of prior reward or punishment. We propose a mechanism for choosing among available options based on goal-option association strengths, where association strengths between objects represent previously experienced object proximity. The proposed…

  19. Efeitos do treinamento físico sobre a resistência mecânica do terço proximal do fêmur de ratos Effects of physical training on the mechanical resistance of rat femur proximal thirds

    Directory of Open Access Journals (Sweden)

    Andreo Fernando Aguiar

    2010-01-01

    Full Text Available OBJETIVO: Analisar o comportamento mecânico do terço proximal do fêmur de ratos submetidos ao treinamento aeróbio e resistido crônicos. MÉTODOS: Ratos Wistar machos (80 dias, 300 a 350 g foram divididos em 3 grupos (n=8 por grupo: Treinamento aeróbio/8 semanas (TA, Treinamento resistido/8 semanas (TR e controle/8 semanas (CO. Ao término do período de treinamento os animais foram sacrificados e o fêmur direito coletado. Para análise do comportamento mecânico do fêmur foram realizados ensaios de flexo-compressão. RESULTADOS: O treinamento resistido ocasionou redução significante da força máxima (Fmáx do fêmur. Por outro lado, promoveu um aumento (23,7% relevante, porém não significante, da deformação da força máxima (DFmáx. O treinamento aeróbio não afetou a Fmáx, porém promoveu uma redução (26,6% considerável, também não significante, da DFmáx. CONCLUSÕES: Os resultados demonstram que o treinamento resistido e aeróbio, promoveram redução da Fmáx e da DFmáx óssea, respectivamente. Os dados evidenciam uma ação diferencial de ambos os modelos de treinamento físico sobre as propriedades mecânicas do fêmur de ratos.OBJECTIVE: To analyze the mechanical behavior of rat femur proximal thirds submitted to chronic aerobic and resistance training. METHODS: Male Wistar rats (80 days of age, weighing 300 to 350 g were divided into 3 groups (n=8 per group: control (CO, aerobic training (TA and resistance training (TR. At the end of the training, the animals were euthanized and the right femur was collected. Flexion-compression tests were carried out to analyze the mechanical behavior of the femurs. RESULTS: The resistance training promoted a significant reduction in maximum force (Fmáx of the femur. However, it also promoted a relevant increase (23.7%, though without statistical significance, in maximum force deformation (DFmáx. The aerobic training did not affect maximum force, however, it caused a

  20. Complications in proximal humeral fractures.

    Science.gov (United States)

    Calori, Giorgio Maria; Colombo, Massimiliano; Bucci, Miguel Simon; Fadigati, Piero; Colombo, Alessandra Ines Maria; Mazzola, Simone; Cefalo, Vittorio; Mazza, Emilio

    2016-10-01

    Necrosis of the humeral head, infections and non-unions are among the most dangerous and difficult-to-treat complications of proximal humeral fractures. The aim of this work was to analyse in detail non-unions and post-traumatic bone defects and to suggest an algorithm of care. Treatment options are based not only on the radiological frame, but also according to a detailed analysis of the patient, who is classified using a risk factor analysis. This method enables the surgeon to choose the most suitable treatment for the patient, thereby facilitating return of function in the shortest possible time. The treatment of such serious complications requires the surgeon to be knowledgeable about the following possible solutions: increased mechanical stability; biological stimulation; and reconstructive techniques in two steps, with application of biotechnologies and prosthetic substitution. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Poisoning and saturation of St 737 getter alloy in the conversion of isotopic waters to isotopic hydrogen

    Energy Technology Data Exchange (ETDEWEB)

    Venkataramani, N. (Ist. di Fisica del Plasma, CNR, Milano (Italy)); Conte, A. (Ist. di Fisica del Plasma, CNR, Milano (Italy)); Ghezzi, F. (Ist. di Fisica del Plasma, CNR, Milano (Italy)); Bonizzoni, G. (Ist. di Fisica del Plasma, CNR, Milano (Italy)); Boffito, C. (SAES Getters S.p.A., Milano (Italy))

    1993-05-01

    The results of the studies performed to investigate the saturation capacity of St 737 getter alloy (ZrV[sub 0.5]Fe[sub 0.5][sub 2]) in its application for conversion of water to hydrogen and the functional behaviour of the conversion reactor rate with large oxygen concentration in the alloy are reported. The experiment was performed with the getter alloy at a temperature of 400 C. The conversion process was monitored by two independent techniques - (i) by the hydrogen release, using a quadrupole mass spectrometer and (ii) by the quantity of water reduction in liquid phase. It was found that more than 100 mg of water was converted and 13 Pa m[sup 3] of hydrogen was released by a gram of alloy. A chemical analysis of the alloy performed after the experiment showed that the oxygen content in the alloy was about 7% by weight. The post-experiment diffraction analysis of the alloy showed that the crystalline structure of the alloy is almost completely destroyed and that the oxides formed are essentially amorphous. A brief discussion of the significance of the results for the application to tritiated water handling in future fusion reactions is also given. (orig.)

  2. Impurity Precipitation, Dissolution, Gettering and Passivation in PV Silicon: Final Technical Report, 30 January 1998--29 August 2001

    Energy Technology Data Exchange (ETDEWEB)

    Weber, E. R.

    2002-02-01

    This report describes the major progress in understanding the physics of transition metals in silicon and their possible impact on the efficiency of solar cells that was achieved during the three-year span of this subcontract. We found that metal-silicide precipitates and dissolved 3d transition metals can be relatively easily gettered. Gettering and passivating treatments must take into account the individuality of each transition metal. Our studies demonstrated how significant is the difference between defect reactions of copper and iron. Copper does not significantly affect the minority-carrier diffusion length in p-type silicon, at least as long as its concentration is low, but readily precipitates in n-type silicon. Therefore, copper precipitates may form in the area of p-n junctions and cause shunts in solar cells. Fortunately, copper precipitates are present mostly in the chemical state of copper-silicide and can relatively easily be dissolved. In contrast, iron was found to form clusters of iron-oxides and iron-silicates in the wafers. These clusters are thermodynamically stable even in high temperatures and are extremely difficult to remove. The formation of iron-silicates was observed at temperatures over 900C.

  3. Effect of nickel silicide gettering on metal-induced crystallized polycrystalline-silicon thin-film transistors

    Science.gov (United States)

    Kim, Hyung Yoon; Seok, Ki Hwan; Chae, Hee Jae; Lee, Sol Kyu; Lee, Yong Hee; Joo, Seung Ki

    2017-06-01

    Low-temperature polycrystalline-silicon (poly-Si) thin-film transistors (TFTs) fabricated via metal-induced crystallization (MIC) are attractive candidates for use in active-matrix flat-panel displays. However, these exhibit a large leakage current due to the nickel silicide being trapped at the grain boundaries of the poly-Si. We reduced the leakage current of the MIC poly-Si TFTs by developing a gettering method to remove the Ni impurities using a Si getter layer and natively-formed SiO2 as the etch stop interlayer. The Ni trap state density (Nt) in the MIC poly-Si film decreased after the Ni silicide gettering, and as a result, the leakage current of the MIC poly-Si TFTs decreased. Furthermore, the leakage current of MIC poly-Si TFTs gradually decreased with additional gettering. To explain the gettering effect on MIC poly-Si TFTs, we suggest an appropriate model. He received the B.S. degree in School of Advanced Materials Engineering from Kookmin University, Seoul, South Korea in 2012, and the M.S. degree in Department of Materials Science and Engineering from Seoul National University, Seoul, South Korea in 2014. He is currently pursuing the Ph.D. degree with the Department of Materials Science and Engineering, Seoul National University, Seoul. He is involved in semiconductor device fabrication technology and top-gate polycrystalline-silicon thin-film transistors. He received the M.S. degree in innovation technology from Ecol Polytechnique, Palaiseau, France in 2013. He is currently pursuing the Ph.D. degree with the Department of Materials Science and Engineering, Seoul National University, Seoul. He is involved in semiconductor device fabrication technology and bottom-gate polycrystalline-silicon thin-film transistors. He is currently pursuing the integrated M.S and Ph.D course with the Department of Materials Science and Engineering, Seoul National University, Seoul. He is involved in semiconductor device fabrication technology and copper

  4. Gettering effects in Si{sub x}Ge{sub 1-x} single crystalline wafers

    Energy Technology Data Exchange (ETDEWEB)

    Wollweber, J.; Schulz, D.; Schroeder, W. [Institut fuer Kristallzuechtung, Berlin (Germany)] [and others

    1995-08-01

    The new interest in single crystal growth of SiGe solid solutions is caused by the development of advanced electronics. The SiGe alloys are mostly used in the form of Si/Si{sub x}Ge{sub 1-x} epitaxial layers in heterostructures, the perfect bulk crystals are required to study fundamental properties. Furthermore, Si{sub x}Ge{sub 1-x} crystals can be used as a substrate material instead of Silicon in order to avoid the buffer layers between the Silicon substrate and strained Si{sub x}Ge{sub 1-x}. Monocrystalline SiGe alloys may be a potential candidate as a base material for infrared solar cells too because of an enhanced IR-sensitivity. In this paper we report a new approach to the growth of Si{sub x}Ge{sub 1-x} single crystals (up to 2{double_prime} in diameter) using the crucible free rf-heated float zone technique as well as the Czochralski-technique for solar cells. The goal is to produce solar cells with an increased photo current in comparison to Silicon cells. based on the lower bandgap of the alloyed crystal. In order to be able to use the Si cells technology (a matter still pending to be proven), low contents of Ge are intended, desirably in the range of about x=0.2. It is worth to mention, that in the conventional Silicon cell processes which give efficiencies up to 18-19%, this efficiency is not limited by the bulk base recombination in the lifetime is above 200 {mu}s there. We can conclude, that there is no basic limitation did prevents Si{sub x}Ge{sub 1-x} wafers to present high lifetimes, above 200{mu}s, at least if the Ge content is below 5%. We can also conclude that the phosphorous gettering from a POCl{sub 3} source, used in silicon, can be successfully used to enhance lifetimes in Si{sub x}Ge{sub 1-x}, at least for the Ge concentration used here.

  5. High-Q Wafer Level Package Based on Modified Tri-Layer Anodic Bonding and High Performance Getter and Its Evaluation for Micro Resonant Pressure Sensor

    Directory of Open Access Journals (Sweden)

    Liying Wang

    2017-03-01

    Full Text Available In order to achieve and maintain a high quality factor (high-Q for the micro resonant pressure sensor, this paper presents a new wafer level package by adopting cross-layer anodic bonding technique of the glass/silicon/silica (GSS stackable structure and integrated Ti getter. A double-layer structure similar to a silicon-on-insulator (SOI wafer is formed after the resonant layer and the pressure-sensitive layer are bonded by silicon direct bonding (SDB. In order to form good bonding quality between the pressure-sensitive layer and the glass cap layer, the cross-layer anodic bonding technique is proposed for vacuum package by sputtering Aluminum (Al on the combination wafer of the pressure-sensitive layer and the resonant layer to achieve electrical interconnection. The model and the bonding effect of this technique are discussed. In addition, in order to enhance the performance of titanium (Ti getter, the prepared and activation parameters of Ti getter under different sputtering conditions are optimized and discussed. Based on the optimized results, the Ti getter (thickness of 300 nm to 500 nm is also deposited on the inside of the glass groove by magnetron sputtering to maintain stable quality factor (Q. The Q test of the built testing system shows that the number of resonators with a Q value of more than 10,000 accounts for more than 73% of the total. With an interval of 1.5 years, the Q value of the samples remains almost constant. It proves the proposed cross-layer anodic bonding and getter technique can realize high-Q resonant structure for long-term stable operation.

  6. Some Properties of Fuzzy Soft Proximity Spaces

    Science.gov (United States)

    Demir, İzzettin; Özbakır, Oya Bedre

    2015-01-01

    We study the fuzzy soft proximity spaces in Katsaras's sense. First, we show how a fuzzy soft topology is derived from a fuzzy soft proximity. Also, we define the notion of fuzzy soft δ-neighborhood in the fuzzy soft proximity space which offers an alternative approach to the study of fuzzy soft proximity spaces. Later, we obtain the initial fuzzy soft proximity determined by a family of fuzzy soft proximities. Finally, we investigate relationship between fuzzy soft proximities and proximities. PMID:25793224

  7. Internal fixation of proximal humerus fractures using the T2-proximal humeral nail.

    Science.gov (United States)

    Popescu, Dragos; Fernandez-Valencia, Jenaro A; Rios, Moisés; Cuñé, Jordi; Domingo, Anna; Prat, Salvi

    2009-09-01

    Surgical management of proximal humerus fractures remains controversial and there is an increasing interest in intramedullary nailing. Created to improve previous designs, the T2-proximal humeral nail (PHN) (Stryker) has been recently released, and the English literature lacks a series evaluating its results. We present a clinical prospective study evaluating this implant for proximal humeral fractures. We evaluated the functional and radiological results and possible complications. Twenty-nine patients with displaced fractures of the proximal humerus were treated with this nail. One patient was lost right after surgery and excluded from the assessment. Eighteen patients were older than 70 years. There were 21 fractures of the proximal part of the humerus and 7 fractures that also involved the shaft; 15 of the fractures were two-part fractures (surgical neck), 5 were three-part fractures, and 1 was a four-part fracture. All fractures healed in a mean period of 2.7 months. There was one delayed union that healed in 4 months. One case of avascular necrosis of the humeral head was observed (a four-part fracture), but remained asymptomatic and did not require further treatment. In one case a back-out of one proximal screw was observed. A final evaluation with a minimum 1 year follow-up was performed by an independent observer; in 18 patients, the mean Constant score was 65.7 or 76.1% with the adjustment of age and gender; in 19 patients, the mean Oxford Shoulder Score was 21.7. The results obtained with the T2-PHN nail indicate that it represents a safe and reliable method in the treatment of two- and three-part fractures of the proximal humerus. The proximal fixation mechanism diminishes the rate of back-out of the screws, a frequent complication described in the literature. Better functional results were obtained from the patients younger than 70 years, but these were not statistically significant.

  8. PROXIMITY MANAGEMENT IN CRISIS CONDITIONS

    Directory of Open Access Journals (Sweden)

    Ion Dorin BUMBENECI

    2010-01-01

    Full Text Available The purpose of this study is to evaluate the level of assimilation for the terms "Proximity Management" and "Proximity Manager", both in the specialized literature and in practice. The study has two parts: the theoretical research of the two terms, and an evaluation of the use of Proximity management in 32 companies in Gorj, Romania. The object of the evaluation resides in 27 companies with less than 50 employees and 5 companies with more than 50 employees.

  9. Refining of Cd and Zn from interstitial impurities using distillation with a ZrFe getter filter

    Directory of Open Access Journals (Sweden)

    Scherban’ A. P.

    2013-10-01

    Full Text Available Behavior of interstitial impurities in Cd and Zn is analysed in terms of thermodynamics. The authors consider reduction reactions of cadmium, zinc and carbon oxides, as well as zinc nitride with the getter material from the Zr-Fe alloy, depending on temperature and vacuum. Optimum initial temperature and vacuum conditions for the processes of deep refining of Cd and Zn from interstitial impurities has been developed. It has been shown experimentally that the proposed refining method provides a more effective cleaning of cadmium and zinc from the interstitial impurities than the distillation without a filter: the impurity content is reduced more than tenfold compared to the concentration in the input metal.

  10. ZrCo as a new H(2) storage and getter for Lyman-α radiation sources.

    Science.gov (United States)

    Woyke, T; Schiller, C; Schmidt, U; Schober, T; Zöger, M

    1995-01-01

    In the past, in sealed-off Lyman-α radiation sources (121.57 nm), uranium hydride was used as the hydrogen reservoir. We found that the zirconium-cobalt alloy ZrCo, which has similar thermodynamic properties, can also be used for hydrogen storage in such lamps. Like uranium, ZrCo acts as a getter for atmospheric contaminants. The advantage of the use of ZrCo lies in much easier and safer handling during production and disposal of the lamps. Using ZrCo, we succeeded in producing radiation sources with a large Lyman-α radiation output and high spectral purity, which were successfully applied in a Lyman-α fluorescence hygrometer for stratospheric observations.

  11. A review of sorbent materials for fixed bed alkali getter systems in biomass gasifier combined cycle power generation applications

    Energy Technology Data Exchange (ETDEWEB)

    Turn, S.Q.; Kinoshita, C.M.; Ishimura, D.M.; Masutani, S.M. [Hawaii Natural Energy Inst., Honolulu, HI (United States); Zhou, J. [Hawaii Univ., Mechanical Engineering Dept., Honolulu, HI (United States)]|[Hawaii Natural Energy Inst., Honolulu, HI (United States); Hiraki, T.T. [Hawaii Univ., Biosystems Engineering Dept., Honolulu, HI (United States)

    1998-12-01

    Gas phase alkali metal compounds contribute to fouling, slagging, corrosion, and agglomeration problems in energy conversion facilities. One method of mitigation applicable at high temperature is to pass the gas stream through a fixed bed of sorbent or getter material that preferentially adsorbs alkali via physical adsorption or chemisorption. This paper reviews studies in which such materials, primarily alumina and silicate compounds, in inert and simulated combustor flue gas conditions were screened. Emathlite, diatomaceous earth, kaolinite, and activated bauxite were identified as potential sorbents and were tested thermogravimetrically or in packed beds under various process conditions. Test experience with candidate sorbent materials in an environment representative of process conditions following a hot filter in a biomass integrated gasifier combined cycle system was found to be lacking. (Author)

  12. On the suitability of getter-purified hydrogen for the LP-MOVPE of (AlGa)As: A comparison to Pd-diffused hydrogen

    Science.gov (United States)

    Hardtdegen, H.; Schmidt, R.; Wirtz, K.; Mueck, A.; Guadagnuolo, S.; Vergani, G.

    2001-11-01

    This paper presents a comparative study of the optical properties of (AlGa)As grown by LP-MOVPE using hydrogen purified by the conventional method, the Pd-cell, and getter-purified hydrogen. The electrical characteristics could not be determined. The free carrier concentration in the 1.3 m thick layers must therefore be lower than 1015cm-3, so that the layer thickness did not exceed the depletion layer thickness. The optical characteristics of the layers depend similarly on the variation of growth parameters and are comparable and state of the rat for both purification techniques. The suitability of getter purification for hydrogen as the carrier gas in MOVPE is therefore demonstrated.

  13. Fractures of the proximal humerus

    DEFF Research Database (Denmark)

    Brorson, Stig

    2013-01-01

    . The bandages were further supported by splints made of wood or coarse grass. Healing was expected in forty days. Different fracture patterns have been discussed and classified since Ancient Greece. Current classification of proximal humeral fractures mainly relies on the classifications proposed by Charles......, classification of proximal humeral fractures remains a challenge for the conduct, reporting, and interpretation of clinical trials. The evidence for the benefits of surgery in complex fractures of the proximal humerus is weak. In three systematic reviews I studied the outcome after locking plate osteosynthesis......Fractures of the proximal humerus have been diagnosed and managed since the earliest known surgical texts. For more than four millennia the preferred treatment was forceful traction, closed reduction, and immobilization with linen soaked in combinations of oil, honey, alum, wine, or cerate...

  14. Cell volume expanded ErBa{sub 2}Cu{sub 3}O{sub y} near y=6.5 through getter annealing

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, J.R.; Oesterreicher, H. [California Univ., San Diego, La Jolla, CA (United States). Dept. of Chemistry

    1998-03-06

    For RBa{sub 2}Cu{sub 3}O{sub y}, R=Er, a cell volume expanded state (V+) in orthorhombic materials is achieved near y=6.46 through getter annealing experiments. Cell volumes are higher than those of the conventional volume contracted (V-) T{sub c}{proportional_to}60 K superconductor and even compared to the cell volume neutral (Vo) semiconductor at y=6.0. Comparisons are drawn with respect to different modes of preparation. Initial annealing at T=1020 K with a Gd getter followed by slow cooling results in relatively well developed orthorhombic splitting and V+ materials. Quenching the getter annealed specimen from T=1020 K does not much affect the level of orthorhombic splitting, but so far the large increase in cell volume has not been observed. A different batch of samples underwent an extended exposure at T=600 K during cooling, and while V+ materials are also obtained, the resolution of the orthorhombic splitting is less developed. Implications for the actual structural and electronic nature of the volume expanded state (V+) are drawn from these experiments. (orig.) 31 refs.

  15. The infrastructure of psychological proximity

    DEFF Research Database (Denmark)

    Nickelsen, Niels Christian Mossfeldt

    2015-01-01

    ). The experience of psychological proximity between patient and nurse is provided through confidence, continuity and the practical set-up. This constitutes an important enactment of skillfulness, which may render telemedicine a convincing health service in the future. Methodology: The study draws on a pilot...... (Langstrup & Winthereik 2008). This study contributes by showing the infrastructure of psychological proximity, which is provided by way of device, confidence, continuity and accountability....

  16. Proximal collagenous gastroenteritides:

    DEFF Research Database (Denmark)

    Nielsen, Ole Haagen; Riis, Lene Buhl; Danese, Silvio

    2014-01-01

    a systematic review of collagenous gastritis, collagenous sprue, and a combination thereof. METHOD: The search yielded 117 studies which were suitable for inclusion in the systematic review. Excluding repeated cases, 89 case reports and 28 case series were reported, whereas no prospective studies...... of these disorders is presented. The prognosis of both collagenous gastritis and sprue seems not to be as dismal as considered previously. Data point to involvement of immune or autoimmune mechanisms potentially driven by luminal antigens initiating the fibroinflammatory condition. CONCLUSIONS: To reach...

  17. Characterization of the surface of ZnO layers and the ZnO/ZnSe interface in heterostructures prepared by radical-beam getter epitaxy

    Energy Technology Data Exchange (ETDEWEB)

    Georgobiani, A.N.; Kotlyarevskii, M.B.; Rogozin, I.V. [Lebedev Physical Inst., Moscow (Russian Federation)] [and others

    1995-10-01

    A{sup II}B{sup VI} wide-band-gap semiconductors, among which are chalcogenides of zinc and cadmium, have considerable potential for use in optoelectronic devices such as light-emitting diodes for the visible region, electroluminescent panels, optical waveguides, and photoelectric solar cells. A{sup II}B{sup VI} semiconductors with band gaps 2.5 eV or greater exhibit monopolar electron conduction, associated with the thermodynamic features of intrinsic lattice defects: upon introduction of an acceptor center, a thermodynamically favored process is the formation of a compensating intrinsic-defect donor (chalcogen vacancy or interstitial metal atom). Thermodynamic and kinetic mechanisms responsible for the self-compepensation of hole conduction in ZnS and ZnSe were considered in detail earlier. Based on kinetic studies of defect formation in A{sup II}B{sup VI} semiconductors, we proposed a number of quasi-equilibrium methods for modifying intrinsic-defect chemistry in order to ensure hole conduction. One of these methods is annealing as-grown crystals in chalcogen vapor preactivated by rf discharge or photolysis. Activation leads to a sharp increase in the concentration of highly reactive neutral chalcogen atoms, which markedly changes the conditions of the adsorption-desorption-crystallization (ADC) equilibrium and allows the defect composition to be controlled over a wide range. In addition, we considered a quasi-epitaxial model for defect formation in a system comprising a crystal of A{sup II}B{sup VI} (e.g., ZnS) and a flow of atoms (or radicals) of chalcogen B (e.g., S). Numerical calculations of a set of kinetic equations describing the quasi-epitaxial model allowed kinetic features of defect formation to be closely examined. The results on the ADC equilibrium were used to develop a radical-beam getter epitaxy process for preparing epitaxial films of A{sup II}B{sup VI} in A{sup II}B{sup VI}-chalcogen systems.

  18. Transverse Stress Fracture of the Proximal Patella

    Science.gov (United States)

    Atsumi, Satoru; Arai, Yuji; Kato, Ko; Nishimura, Akinobu; Nakazora, Shigeto; Nakagawa, Shuji; Ikoma, Kazuya; Fujiwara, Hiroyoshi; Sudo, Akihiro; Kubo, Toshikazu

    2016-01-01

    Abstract Among stress fractures associated with sports activities, patellar stress fracture is rare. Regarding patella stress fractures, so far only distal transverse or lateral longitudinal fractures have been reported, but there are no reports of transverse fractures occurring in the proximal patella. We describe an extremely rare case of transverse stress fracture of proximal patella in a 9-year-old athlete. A 9-year old boy, who participated in sports (sprints and Kendo) presented with left knee pain without any external injury. In plain radiographs, a fracture line was observed in the proximal 1/3 of the left patella, and a patella stress fracture was diagnosed. For treatment, because 7 months of conservative therapy showed no improvement, internal fixation was carried out using Acutrak screws, and bone union was thus achieved. Three months after the operation, he was able to return to his previous level of athletic sports activity. Regarding the mechanism of onset, it is believed that the causes are longitudinal traction force and patellofemoral contact pressure. On the other hand, the contact region of the patella with the femur changes with the flexion angle of the knee. In the current case, the fracture occurred at a site where the patella was in contact with the femur at a flexion angle of >90°, so it is believed that it occurred as a clinical condition from being subjected to repeated longitudinal traction force and patellofemoral contact pressure at a flexion angle of >90°, during the sports activities of sprints and Kendo. The nonunion of the transverse stress fracture of his proximal patella was successfully treated with internal fixation using Acutrak screws. PMID:26871789

  19. Cubesat Proximity Operations Demonstration (CPOD)

    Science.gov (United States)

    Villa, Marco; Martinez, Andres; Petro, Andrew

    2015-01-01

    The CubeSat Proximity Operations Demonstration (CPOD) project will demonstrate rendezvous, proximity operations and docking (RPOD) using two 3-unit (3U) CubeSats. Each CubeSat is a satellite with the dimensions 4 inches x 4 inches x 13 inches (10 centimeters x 10 centimeters x 33 centimeters) and weighing approximately 11 pounds (5 kilograms). This flight demonstration will validate and characterize many new miniature low-power proximity operations technologies applicable to future missions. This mission will advance the state of the art in nanosatellite attitude determination,navigation and control systems, in addition to demonstrating relative navigation capabilities.The two CPOD satellites are scheduled to be launched together to low-Earth orbit no earlier than Dec. 1, 2015.

  20. The secondary electron yield of TiZr and TiZrV non evaporable getter thin film coatings

    CERN Document Server

    Scheuerlein, C; Hilleret, Noël; Taborelli, M

    2001-01-01

    The secondary electron yield (SEY) of two different non evaporable getter (NEG) samples has been measured 'as received' and after thermal treatment. The investigated NEGs are TiZr and TiZrV thin film coatings of 1 mm thickness, which are sputter deposited onto copper substrates. The maximum SEY dmax of the air exposed TiZr and TiZrV coating decreases from above 2.0 to below 1.1 during a 2 hour heat treatment at 250 °C and 200 °C, respectively. Saturating an activated TiZrV surface under vacuum with the gases typically present in ultra high vacuum systems increases dmax by about 0.1. Changes in elemental surface composition during the applied heat treatments were monitored by Auger electron spectroscopy (AES). After activation carbon, oxygen and chlorine were detected on the NEG surfaces. The potential of AES for detecting the surface modifications which cause the reduction of SE emission during the applied heat treatments is critically discussed.

  1. The secondary electron yield of TiZr and TiZrV non-evaporable getter thin film coatings

    Science.gov (United States)

    Henrist, B.; Hilleret, N.; Scheuerlein, C.; Taborelli, M.

    2001-03-01

    The secondary electron yield (SEY) of two different non-evaporable getter (NEG) samples has been measured 'as received' and after thermal treatment. The investigated NEGs are TiZr and TiZrV thin film coatings of 1 μm thickness, which are sputter deposited onto copper substrates. The maximum SEY δmax of the air exposed TiZr and TiZrV coating decreases from above 2.0 to below 1.1 during a 2 h heat treatment at 250 and 200°C, respectively. Saturating an activated TiZrV surface under vacuum with the gases typically present in ultra-high vacuum systems increases δmax by about 0.1. Changes in elemental surface composition during the applied heat treatments were monitored by Auger electron spectroscopy (AES). After activation carbon, oxygen and chlorine were detected on the NEG surfaces. The potential of AES for detecting the surface modifications which cause the reduction of SE emission during the applied heat treatments is critically discussed.

  2. The Activation of Non-evaporable Getters Monitored by AES, XPS, SSIMS and Secondary Electron Yield Measurements

    CERN Document Server

    Scheuerlein, C

    2002-01-01

    In this thesis the potential of the three classical surface analysis techniques Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS) and static secondary ion mass spectrometry (SSIMS) for the characterisation of non-evaporable getter (NEG) materials is assessed and artefacts are described. The various NEG samples have been analysed in the context of the development of NEG thin film coatings for use in accelerator ultra high vacuum (UHV) systems. The secondary electron yield (SEY), which is a functional surface property of great importance for the application of NEG to accelerators, has been measured. The maximum SEY of an air exposed TiZr and TiZrV coating can be reduced from above 2.0 to below 1.1 during a 2 h heat treatment at 250 and 200 °C, respectively. Saturating an activated TiZrV surface in UHV increases the maximum SEY by about 0.1. Thus, in UHV the SEY of an activated NEG coating does not exceed the threshold value of 1.35, above which multipacting is predicted to occur in th...

  3. Yucca Mountain Project Getter Program Results (Year 1) I-I29 and Other Anions of Concern

    Energy Technology Data Exchange (ETDEWEB)

    J.L. Krumhansl; J.D. Pless; J.B. Chwirka; K.C. Holt

    2006-07-17

    Although high level nuclear wastes (HLW) contain a daunting array of radioisotopes, only a restricted number are long-lived enough to be problematic, and of these many are either effectively insoluble or are likely to be scavenged from solution by minerals indigenous to all aquifers. Those few constituents likely to travel significant distances through aquifers either form colloids (and travel as particulates) or anions--which are not sorbed onto the predominantly negatively charged mineral surfaces. Iodine ({sup 129}I) is one such constituent and may travel as either iodide (I{sup -}) or iodate (IO{sub 3}{sup -}) depending on whether conditions are mildly reducing or oxidizing. Conventionally, {sup 99}Tc (traveling as TcO{sub 4}{sup 0}) is regarded as being of greater concern since it is both more abundant and has a shorter half life (e.g., has a higher specific activity). However, it is unclear whether TcO{sub 4}{sup -} will ever actually form in the mildly reducing environments thought likely within degrading HLW canisters. Instead, technetium may remain reduced as highly insoluble Tc(lV), in which case {sup 129}I might become a significant risk driver in performance assessment (PA) calculations. In the 2004-2005 time frame the US Department of Energy (DOE)--Office of Civilian Radioactive Waste Management (OCRUM), Office of Science and Technology International (S&T) funded a program to identify ''getters'' for possible placement in the invert beneath HLW packages in the repository being planned by the Yucca Mountain Project (YMP). This document reports on progress made during the first (and only) year of this activity. The problem is not a new one and the project did not proceed in a complete vacuum of information. Potential leads came from past studies directed at developing anion getters for a near surface low-level waste facility at Hanford, which suggested that both copper-containing compounds and hydrotalcite-group minerals might be

  4. Efficient Indoor Proximity and Separation Detection for Location Fingerprinting

    DEFF Research Database (Denmark)

    Kjærgaard, Mikkel Baun; Treu, Georg; Ruppel, Peter

    2008-01-01

    Detecting proximity and separation among mobile targets is a basic mechanism for many location-based services (LBSs) and requires continuous positioning and tracking. However, realizing both mechanisms for indoor usage is still a major challenge. Positioning methods like GPS cannot be applied there......, and for distance calculations the particular building topology has to be taken into account. To address these challenges, this paper presents a novel approach for indoor proximity and separation detection, which uses location fingerprinting for indoor positioning of targets and walking distances for modeling...

  5. SHORT COMMUNICATION PROXIMATE COMPOSITION, MINERAL ...

    African Journals Online (AJOL)

    Preferred Customer

    SHORT COMMUNICATION. PROXIMATE COMPOSITION, MINERAL CONTENT AND ANTINUTRITIONAL. FACTORS OF SOME CAPSICUM (Capsicum annum) VARIETIES GROWN IN. ETHIOPIA. Esayas K.1, Shimelis A.2, Ashebir F.3, Negussie R.3, Tilahun B.4 and Gulelat D.4*. 1Hawassa University, Department of Food ...

  6. Empathy: Its ultimate and proximate bases.

    Science.gov (United States)

    Preston, Stephanie D; de Waal, Frans B M

    2002-02-01

    There is disagreement in the literature about the exact nature of the phenomenon of empathy. There are emotional, cognitive, and conditioning views, applying in varying degrees across species. An adequate description of the ultimate and proximate mechanism can integrate these views. Proximately, the perception of an object's state activates the subject's corresponding representations, which in turn activate somatic and autonomic responses. This mechanism supports basic behaviors (e.g., alarm, social facilitation, vicariousness of emotions, mother-infant responsiveness, and the modeling of competitors and predators) that are crucial for the reproductive success of animals living in groups. The Perception-Action Model (PAM), together with an understanding of how representations change with experience, can explain the major empirical effects in the literature (similarity, familiarity, past experience, explicit teaching, and salience). It can also predict a variety of empathy disorders. The interaction between the PAM and prefrontal functioning can also explain different levels of empathy across species and age groups. This view can advance our evolutionary understanding of empathy beyond inclusive fitness and reciprocal altruism and can explain different levels of empathy across individuals, species, stages of development, and situations.

  7. Dry storage in casks at the site of Super-Phenix -- The special problem of the tritium getter-process within a transport and storage cask filled with absorber rods

    Energy Technology Data Exchange (ETDEWEB)

    Janberg, K.; Petrucci, F. [Gesellschaft fur Nuklear-Service, Hannover (Germany)

    1995-12-31

    The French fast breeder Super-Phenix SPX must annually discharge 24 spent absorber rods, when operating at full power. For these rods, interim storage is the best option, because reprocessing is not appropriate due to the presence of tritium, and a final repository is not available. For this purpose, transport and storage casks of the type CASTOR BARRE were designed and fabricated to accommodate 12 such rods each. As a special feature, the cask is equipped with tritium getter material, so that in case of a possible release of tritium from the rods, it will be preferentially absorbed by the getter material.

  8. Test results of a combined distributed ion pump/non-evaporable getter pump design developed as a proposed alternative pumping system for the PEP-II asymmetric B-Factory collider

    Energy Technology Data Exchange (ETDEWEB)

    Holdener, F.; Behne, D.; Hathaway, D. [Lawrence Livermore National Lab., CA (United States)] [and others

    1995-04-24

    The authors have built and tested an all-in-one combination plate-type distributed ion pump/non-evaporable getter pump design (DIP/NEG) considered as a proposed alternative pumping system for the PEP-II B-Factory High Energy Ring (HER). The DIP portion of the design used a Penning cell hole size of 12 mm in a mostly uniform magnetic field of 0.18 T. The NEG portion of the design used commercially available non-evaporable getter material type St-707{trademark}. A detailed description of the design is presented along with results of pumping speed measurements.

  9. Bicarbonate secretion by rabbit proximal colon.

    Science.gov (United States)

    Sullivan, S K; Smith, P L

    1986-10-01

    Stripped segments of proximal colon (1-6 cm distal to the ampulla caecalis coli) were studied in vitro in Ussing chambers under short-circuit conditions using the pH-stat technique. With glucose and HCO3-CO2 present in the serosal bathing solution only, proximal colon alkalinizes the luminal bathing solution at a rate of 2.1 +/- 0.2 mu eq X h-1 X cm-2 (n = 36). With HCO3-CO2 present in the luminal bathing solution alone, proximal colon does not significantly acidify or alkalinize the serosal bathing solution. Addition of glucose (10 mM) to the luminal bathing solution abolished luminal alkalinization. Removal of HCO3 and CO2 from the serosal bathing solution or replacement of O2 with N2 also abolished luminal alkalinization. Acetazolamide (0.1 mM) added to both bathing solutions did not alter the rate of luminal alkalinization. Ion-replacement studies revealed that the alkalinization process was highly dependent on the presence of Na in the bathing solutions and much less dependent on the presence of Cl. Furthermore, ouabain (0.1 mM) significantly reduced luminal alkalinization. As in rabbit ileum, serosal epinephrine (0.1 mM) did not alter luminal alkalinization but increased serosal alkalinization by a Na-dependent mechanism. These results suggest that luminal alkalinization results from a Na-dependent, active transcellular HCO3 transport process and that a Na-dependent HCO3 absorptive process is activated by adrenergic stimuli.

  10. Temporal Proximity Promotes Integration of Overlapping Events.

    Science.gov (United States)

    Zeithamova, Dagmar; Preston, Alison R

    2017-08-01

    Events with overlapping elements can be encoded as two separate representations or linked into an integrated representation, yet we know little about the conditions that promote one form of representation over the other. Here, we tested the hypothesis that the proximity of overlapping events would increase the probability of integration. Participants first established memories for house-object and face-object pairs; half of the pairs were learned 24 hr before an fMRI session, and the other half 30 min before the session. During scanning, participants encoded object-object pairs that overlapped with the initial pairs acquired on the same or prior day. Participants were also scanned as they made inference judgments about the relationships among overlapping pairs learned on the same or different day. Participants were more accurate and faster when inferring relationships among memories learned on the same day relative to those acquired across days, suggesting that temporal proximity promotes integration. Evidence for reactivation of existing memories-as measured by a visual content classifier-was equivalent during encoding of overlapping pairs from the two temporal conditions. In contrast, evidence for integration-as measured by a mnemonic strategy classifier from an independent study [Richter, F. R., Chanales, A. J. H., & Kuhl, B. A. Predicting the integration of overlapping memories by decoding mnemonic processing states during learning. Neuroimage, 124, 323-335, 2016]-was greater for same-day overlapping events, paralleling the behavioral results. During inference itself, activation patterns further differentiated when participants were making inferences about events acquired on the same day versus across days. These findings indicate that temporal proximity of events promotes integration and further influences the neural mechanisms engaged during inference.

  11. Photoactivated In Vivo Proximity Labeling.

    Science.gov (United States)

    Beck, David B; Bonasio, Roberto

    2017-06-19

    Identification of molecular interactions is paramount to understanding how cells function. Most available technologies rely on co-purification of a protein of interest and its binding partners. Therefore, they are limited in their ability to detect low-affinity interactions and cannot be applied to proteins that localize to difficult-to-solubilize cellular compartments. In vivo proximity labeling (IPL) overcomes these obstacles by covalently tagging proteins and RNAs based on their proximity in vivo to a protein of interest. In IPL, a heterobifunctional probe comprising a photoactivatable moiety and biotin is recruited by a monomeric streptavidin tag fused to a protein of interest. Following UV irradiation, candidate interacting proteins and RNAs are covalently biotinylated with tight spatial and temporal control and subsequently recovered using biotin as an affinity handle. Here, we describe experimental protocols to discover novel protein-protein and protein-RNA interactions using IPL. © 2017 by John Wiley & Sons, Inc. Copyright © 2017 John Wiley & Sons, Inc.

  12. Prox-1 Automated Proximity Operations

    Science.gov (United States)

    2016-01-13

    on demonstrating the functionality required to meet minimum mission success criteria. The minimum mission includes on- orbit spacecraft checkout of...also includes deployment of LightSail-B from the P-POD, and imaging of LightSail-B for 20 minutes as it recedes from Prox-1. small satellite ; proximity...criteria. The minimum mission includes on- orbit spacecraft checkout of all spacecraft subsystems, including flight qualification of the following new

  13. Surface analytical investigations of the interaction between the getter material ZrCo and hydrogen and the influence of different contamination gases on the hydrogen storage capacity; Oberflaechenanalytische Untersuchungen zur Wechselwirkung des Getters ZrCo mit Wasserstoff und zum Einfluss verschiedener Kontaminationsgase auf die Wasserstoffspeicherfaehigkeit

    Energy Technology Data Exchange (ETDEWEB)

    Glasbrenner, H.

    1991-11-01

    In this work the results of surface analytical investigations of the alloy ZrCo used for hydrogen storage as well as of the interaction of the alloy with hydrogen and various contamination gases present in a nuclear fusion reactor will be presented and discussed with respect to the application of ZrCo as getter material for tritium. The characterization of the ZrCo alloy showed that on the surface a stable ZrO{sub 2}-layer is formed, which is, however, inhomogeneous. On the phase boundary solid / gas of samples exposed to hydrogen up to the stoichiometrical composition ZrCoH{sub 2.8} a Co enrichment was observed. If the alloy ZrCo is activated before hydrogen take-up in the same way as other getter materials by heating under vacuum, the hydrogenation occurs faster and nearly complete. Zirconium is the alloy component responsible for the hydrogen storage. If a gas reacts nearly exclusively with the alloy component Co, a smaller decrease in the hydrogen storage capacity will be noticed. By exposition to CO and CO{sub 2} mainly compounds with cobalt are formed. However, if the gas produces compounds with Zr like carbide, nitride, or oxide, the result is a strong decrease of the hydrogen storage capacity of the getter. (orig./MM). [Deutsch] In der vorliegenden Arbeit werden die Ergebnisse grundlegender, oberflaechenanalytischer Untersuchungen an der zur Wasserstoffspeicherung eingesetzten Legierung ZrCo sowie deren Wechselwirkung mit Wasserstoff und verschiedenen Kontaminationsgasen vorgestellt und im Hinblick auf den Einsatz von ZrCo als Gettermaterial fuer Tritium diskutiert. Die Charakterisierung der ZrCo-Legierung ergab, dass sich an der Grenzflaeche eine stabile ZrO{sub 2}-Schicht aufbaut, die jedoch inhomogen ist. Bei H{sub 2}-beladenen Proben mit der Stoechiometrie ZrCoH{sub 2.8} wurde eine Cobaltanreicherung an der Phasengrenzflaeche fest/gasfoermig beobachtet. Aktiviert man die Legierung ZrCo wie andere Getter vor der Beladung mit Wasserstoff durch Erhitzen im

  14. Proximal tibiofibular dislocation: a case report and review of literature

    NARCIS (Netherlands)

    Nieuwe Weme, R. A.; Somford, M. P.; Schepers, T.

    2014-01-01

    An isolated dislocation of the proximal tibiofibular joint is uncommon. The mechanism of this injury is usually sports related. We present a case where initial X-rays did not show the tibiofibular joint dislocation conclusively. It was diagnosed after comparative bilateral AP X-rays of the knees

  15. Late Proximal Pedicle Hook Migration Into Spinal Canal After Posterior Correction Surgery of Scoliosis Causing Neurologic Deficit: "Proximal Junctional Scoliosis"? Case Series and a Review of the Literature

    NARCIS (Netherlands)

    Vereijken, I.M.P.; de Kleuver, M.

    2013-01-01

    Study Design: Case series. Objectives: We describe 4 patients with proximal pedicle hook migration as a late complication (greater than 12 months postoperatively) of posterior correction surgery in adolescent idiopathic scoliosis. We studied failure mechanisms and propose strategies for revision

  16. PROXIMATE AND ELEMENTAL COMPOSITION OF WHITE GRUBS

    African Journals Online (AJOL)

    DR. AMINU

    PROXIMATE AND ELEMENTAL COMPOSITION OF WHITE GRUBS. 1 Alhassan, A. J. 1M .S. Sule, 1J. ... ABSTRACT. This study determined the proximate and mineral element composition of whole white grubs using standard methods of analysis. Proximate ... days, before pulverized to powder and kept in plastic container.

  17. Longitudinal spin Seebeck effect free from the proximity Nernst effect.

    Science.gov (United States)

    Kikkawa, T; Uchida, K; Shiomi, Y; Qiu, Z; Hou, D; Tian, D; Nakayama, H; Jin, X-F; Saitoh, E

    2013-02-08

    This Letter provides evidence for intrinsic longitudinal spin Seebeck effects (LSSEs) that are free from the anomalous Nernst effect (ANE) caused by an extrinsic proximity effect. We report the observation of LSSEs in Au/Y(3)Fe(5)O(12) (YIG) and Pt/Cu/YIG systems, showing that the LSSE appears even when the mechanism of the proximity ANE is clearly removed. In the conventional Pt/YIG structure, furthermore, we separate the LSSE from the ANE by comparing the voltages in different magnetization and temperature-gradient configurations; the ANE contamination was found to be negligibly small even in the Pt/YIG structure.

  18. Surface segregation as a means of gettering Cu in liquid-phase-epitaxy silicon thin layers grown from Al-Cu-Si solutions

    Energy Technology Data Exchange (ETDEWEB)

    Wang, T.H.; Ciszek, T.F.; Reedy, R.; Asher, S.; King, D. [National Renewable Energy Lab., Golden, CO (United States)

    1996-05-01

    The authors demonstrate that, by using the natural surface segregation phenomenon, Cu can be gettered to the surface from the bulk of silicon layers so that its concentrations in the liquid-phase-epitaxy (LPE) layers are much lower than its solubility at the layer growth temperature and the reported 10{sup 17} cm{sup {minus}3} degradation threshold for solar-cell performance. Secondary-ion mass spectroscopy (SIMS) analysis indicates that, within a micron-deep sub-surface region, Cu accumulates even in as-grown LPE samples. Slower cooling after growth to room temperature enhances this Cu enrichment. X-ray photoelectron spectroscopy (XPS) measurement shows as much as 3.2% Cu in a surface region of about 50 {Angstrom}. More surface-sensitive, ion-scattering spectroscopy (ISS) analysis further reveals about 7% of Cu at the top surface. These results translate to an areal gettering capacity of about 1.0 x 10{sup 16} cm{sup {minus}2}, which is higher than the available total-area density of Cu in the layer and substrate (3.6 x 10{sup 15} cm{sup {minus}2} for a uniform 1.2 x 10{sup 17}cm{sup {minus}3} Cu throughout the layer and substrate with a total thickness of 300 {mu}m).

  19. Surface segregation as a means of gettering Cu in liquid-phase-epitaxy silicon thin layers grown from Al-Cu-Si solutions

    Energy Technology Data Exchange (ETDEWEB)

    Wang, T.H.; Ciszek, T.F.; Reedy, R.; Asher, S.; King, D. [National Renewable Energy Lab., Golden, CO (United States)

    1996-09-01

    The authors demonstrate that, by using the natural surface segregation phenomenon, Cu can be gettered to the surface from the bulk of silicon layers so that its concentrations in the liquid-phase-epitaxy (LPE) layers are much lower than its solubility at the layer growth temperature and the reported 10{sup 17} cm{sup {minus}3} degradation threshold for solar-cell performance. Secondary-ion mass spectroscopy (SIMS) analysis indicates that, within a micron-deep sub-surface region, Cu accumulates even in as-grown LPE samples. Slower cooling after growth to room temperature enhances this Cu enrichment. X-ray photoelectron spectroscopy (XPS) measurement shows as much as 3.2% Cu in a surface region of about 50 {angstrom}. More surface-sensitive, ion-scattering spectroscopy (ISS) analysis further reveals about 7% of Cu at the top surface. These results translate to an areal gettering capacity of about 1.0 {times} 10{sup 16} cm{sup {minus}2}, which is higher than the available total-area density of Cu in the layer and substrate (3.6 {times} 10{sup 15} cm{sup {minus}2} for a uniform 1.2 {times} 10{sup 17} cm{sup {minus}3} Cu throughout the layer and substrate with a total thickness of 300 {micro}m).

  20. Simultaneous P and B diffusion, in-situ surface passivation, impurity filtering and gettering for high-efficiency silicon solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Krygowski, T.; Rohatgi, A. [Georgia Inst. of Tech., Atlanta, GA (United States); Ruby, D. [Sandia National Labs., Albuquerque, NM (United States)

    1997-11-01

    A technique is presented to simultaneously diffuse boron and phosphorus in silicon, and grow an in-situ passivating oxide in a single furnace step. It is shown that limited solid doping sources made from P and B Spin-On Dopant (SOD) films can produce optimal n{sup +} and p{sup +} profiles simultaneously without the deleterious effects of cross doping. A high quality passivating oxide is grown in-situ beneath the thin ({approximately} 60 {angstrom}) diffusion glass, resulting in low J{sub o} values below 100 fA/cm{sup 2} for transparent ({approximately} 100 {Omega}/{open_square}) phosphorus and boron diffusions. For the first time it is shown that impurities present in the boron SOD film can be effectively filtered out by employing separate source wafers, resulting in bulk lifetimes in excess of 1 ms for the sample wafers. The degree of lifetime degradation in the sources is related to the gettering efficiency of boron in silicon. This novel simultaneous diffusion, in-situ oxidation, impurity filtering and gettering technique was successfully used to produce 20.3% Fz, and 19.1% Cz solar cells, in one furnace step.

  1. Effect of the temperature and the porosity of the gettering process on the removal of heavy metals from Tunisian phosphate rock

    Directory of Open Access Journals (Sweden)

    R. Daik

    Full Text Available Gettering is a process by which unwanted impurities are removed by providing an alternative location, this method used by many researchers for the purification of silicon wafers or powder. In this work, this method is used for the first time to remove the impurities from Tunisian phosphate rock (TPR. This method consists in two steps: the rapid thermal processing by infrared furnace followed by a rapid chemical etching. In order to enhance the efficiency of this process, a porous layer on the surface of grains was grown. By this method, we have demonstrated in this present work that the majority of impurities were well extracted from TPR. UV–visible absorption spectra show that the highest intensity of absorbance (∼1 appears for the porous sample treated at 900 °C (P900 °C, which due to the presence of large quantities of impurities in the extracted solution. These results were well confirmed by AAS and ICP-AES which show that the majority of the impurities have been almost removed for the P900 °C sample. Keywords: Gettering process, Porous phosphate rock, Temperature, Impurities

  2. Molecular desorption of a nonevaporable getter St 707 irradiated at room temperature with synchrotron radiation of 194 eV critical photon energy

    CERN Document Server

    Le Pimpec, F; Laurent, Jean Michel

    2003-01-01

    Photon stimulated molecular desorption from a nonevaporable getter (NEG) St 707(R) (SAES Getters TM ) surface after conditioning and after saturation with isotopic carbon monoxide Ýcf. nomenclature in Handbook of Chemistry and Physics, 74th edition, edited by D. R. Lide (CRC Press, Boca Raton, 1994)¿ /sup 13/C/sup 18/O, has been studied on a dedicated beamline at the EPA ring at CERN. The synchrotron radiation of 194 eV critical energy and with an average photon intensity of ~1 * 10/sup 17/ photons s/sup -1/ was impinging on the sample at perpendicular incidence. It is found that the desorption yields eta (molecules/photon) of the characteristic gases in an UHV system (hydrogen, methane, carbon monoxide, and carbon dioxide) for a freshly activated NEG and for a NEG fully saturated with /sup 13/C /sup 18/O are lower than that of 300 degrees C baked stainless steel. (22 refs). Fully activated NEG was studied and found to desorb less as compared to a 300 degree c baked stainless-steel surface. Furthermore, it ...

  3. Bilateral trampoline fracture of the proximal tibia in a child

    Directory of Open Access Journals (Sweden)

    Enrico B Arkink, MD

    2017-12-01

    Full Text Available Trampoline fractures are transversely oriented impaction fractures of the proximal tibia sustained by young children jumping on a trampoline. Unaware of the mechanism of this specific nontraumatic fracture, physicians may fail to detect these fractures on plain radiographs, as radiological findings may be very subtle. In this case report, we present a rare case of bilateral trampoline fractures with an explanation of the trauma mechanism.

  4. Finger Proximal Interphalangeal Joint Dislocation.

    Science.gov (United States)

    Ramponi, Denise; Cerepani, Mary Jo

    2015-01-01

    Finger dislocations are common injuries that are often managed by emergency nurse practitioners. A systematic physical examination following these injuries is imperative to avoid complications. Radiographic views, including the anteroposterior, lateral, and oblique views, are imperative to evaluate these finger dislocations. A dorsal dislocation of the proximal interphalangeal (PIP) joint is the most common finger dislocation type often easily reduced. A volar PIP dislocation can often be difficult to reduce and may result in finger deformity. Finger dislocations should be reduced promptly. Referral to an orthopedic hand specialist is required if the dislocation is unable to be reduced or if the finger joint is unstable following reduction attempts.

  5. Equilibrium properties of proximity effect

    Energy Technology Data Exchange (ETDEWEB)

    Esteve, D.; Pothier, H.; Gueron, S.; Birge, N.O.; Devoret, M.

    1996-12-31

    The proximity effect in diffusive normal-superconducting (NS) nano-structures is described by the Usadel equations for the electron pair correlations. We show that these equations obey a variational principle with a potential which generalizes the Ginzburg-Landau energy functional. We discuss simple examples of NS circuits using this formalism. In order to test the theoretical predictions of the Usadel equations, we have measured the density of states as a function of energy on a long N wire in contact with a S wire at one end, at different distances from the NS interface. (authors). 12 refs.

  6. Effect of angiotensin II receptor blockade on proximal tubular fluid reabsorption

    DEFF Research Database (Denmark)

    Leyssac, P P; Karlsen, F M; Holstein-Rathlou, N H

    1997-01-01

    convolution of halothane-anesthetized Sprague-Dawley rats. Four parameters that depend on the rate of proximal fluid reabsorption were measured: proximal intratubular pressure (Pprox), early and late proximal flow rate, and early distal NaCl concentration. Pprox decreased by 0.5 +/- 0.1 mmHg, late proximal...... flow rate decreased by 2.0 +/- 0.8 nl/min, and early distal NaCl concentration decreased by 4.3 +/- 0.8 mM (mean +/- SE). No changes were observed after microperfusion with saline. Because the tubuloglomerular feedback mechanism was operating in the closed-loop mode, the decreased NaCl load...... the early and late proximal convolutions was estimated to be 7.8 nl/min (approximately 36%). It is concluded that a decrease in local luminal angiotensin II levels and/or AT1 receptor activity under free flow conditions increases the rate of proximal tubular fluid reabsorption....

  7. Effect of electroacupuncture at distal–proximal acupoint combinations on spinal interleukin-1 beta in a rat model of neuropathic pain

    Directory of Open Access Journals (Sweden)

    Huili Jiang

    2015-01-01

    Conclusion: EA at distal + proximal acupoints, distal points, as well as proximal points attenuated upregulation of spinal IL-1β, alleviated the extent of neuropathic pain hypersensitivity, and promoted mechanical withdrawal threshold, resulting in EA analgesia.

  8. Mechanics

    CERN Document Server

    Hartog, J P Den

    1961-01-01

    First published over 40 years ago, this work has achieved the status of a classic among introductory texts on mechanics. Den Hartog is known for his lively, discursive and often witty presentations of all the fundamental material of both statics and dynamics (and considerable more advanced material) in new, original ways that provide students with insights into mechanical relationships that other books do not always succeed in conveying. On the other hand, the work is so replete with engineering applications and actual design problems that it is as valuable as a reference to the practicing e

  9. Evaluation of Technetium Getters to Improve the Performance of Cast Stone

    Energy Technology Data Exchange (ETDEWEB)

    Neeway, James J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Qafoku, Nikolla P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Serne, R. Jeffrey [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lawter, Amanda R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stephenson, John R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lukens, Wayne W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Westsik, Joseph H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-11-01

    Cast Stone has been selected as the preferred waste form for solidification of aqueous secondary liquid effluents from the Hanford Tank Waste Treatment and Immobilization Plant (WTP) process condensates and low-activity waste (LAW) melter off-gas caustic scrubber effluents. Cast Stone is also being evaluated as a supplemental immobilization technology to provide the necessary LAW treatment capacity to complete the Hanford tank waste cleanup mission in a timely and cost effective manner. One of the major radionuclides that Cast Stone has the potential to immobilize is technetium (Tc). The mechanism for immobilization is through the reduction of the highly mobile Tc(VII) species to the less mobile Tc(IV) species by the blast furnace slag (BFS) used in the Cast Stone formulation. Technetium immobilization through this method would be beneficial because Tc is one of the most difficult contaminants to address at the U.S. Department of Energy (DOE) Hanford Site due to its complex chemical behavior in tank waste, limited incorporation in mid- to high-temperature immobilization processes (vitrification, steam reformation, etc.), and high mobility in subsurface environments. In fact, the Tank Closure and Waste Management Environmental Impact Statement for the Hanford Site, Richland, Washington (TC&WM EIS) identifies technetium-99 (99Tc) as one of the radioactive tank waste components contributing the most to the environmental impact associated with the cleanup of the Hanford Site. The TC&WM EIS, along with an earlier supplemental waste-form risk assessment, used a diffusion-limited release model to estimate the release of different contaminants from the WTP process waste forms. In both of these predictive modeling exercises, where effective diffusivities based on grout performance data available at the time, groundwater at the 100-m down-gradient well exceeded the allowable maximum permissible concentrations for 99Tc. (900 pCi/L). Recent relatively

  10. Proximity sensor technology for manipulator end effectors

    Science.gov (United States)

    Johnston, A. R.

    1975-01-01

    Optical proximity sensing techniques which could be used to help control the critical grasping phase of a remote manipulation are described. The proximity sensors described use a triangulation geometry to detect a surface located in a pre-determined region. The design of the proximity sensors themselves is discussed, as well as their application to manipulator control with a local control loop, and possibilities for future development are discussed.

  11. [RESEARCH PROGRESS OF BIOMECHANICS OF PROXIMAL ROW CARPAL INSTABILITY].

    Science.gov (United States)

    Guo, Jinhai; Huang, Fuguo

    2015-01-01

    To review the research progress of the biomechanics of proximal row carpal instability (IPRC). The related literature concerning IPRC was extensively reviewed. The biomechanical mechanism of the surrounding soft tissue in maintaining the stability of the proximal row carpal (PRC) was analyzed, and the methods to repair or reconstruct the stability and function of the PRC were summarized from two aspects including basic biomechanics and clinical biomechanics. The muscles and ligaments of the PRC are critical to its stability. Most scholars have reached a consensus about biomechanical mechanism of the PRC, but there are still controversial conclusions on the biomechanics mechanism of the surrounding soft tissue to stability of distal radioulnar joint when the triangular fibrocartilage complex are damaged and the biomechanics mechanism of the scapholunate ligament. At present, there is no unified standard about the methods to repair or reconstruct the stability and function of the PRC. So, it is difficult for clinical practice. Some strides have been made in the basic biomechanical study on muscle and ligament and clinical biomechanical study on the methods to repair or reconstruct the stability and function of PRC, but it will be needed to further study the morphology of carpal articular surface and the adjacent articular surface, the pressure of distal carpals to proximal carpal and so on.

  12. Proximate composition and antinutrient content of pumpkin ...

    African Journals Online (AJOL)

    Proximate composition and antinutrient content of pumpkin ( Cucurbita pepo ) and sorghum ( Sorghum bicolor ) flour blends fermented with Lactobacillus plantarum , Aspergillus niger and Bacillus subtilis.

  13. Influence of the elemental composition and crystal structure on the vacuum properties of Ti-Zr-V non-evaporable getter films

    CERN Document Server

    Prodromides, A E; Chiggiato, P; Mongelluzzo, A; Ruzinov, V; Scheuerlein, C; Taborelli, M; Lévy, F

    2001-01-01

    Non-evaporable thin film getters based on the elements of the 4th and 5th columns of the periodic table have been deposited by sputtering. Among the about 20 alloys studied to date, the lowest activation temperature (about 180 °C for a 24-hour heating) has been found for the Ti-Zr-V system in a well-defined composition range. The characterization of the activation behavior of such Ti-Zr-V films is presented. The evolution of the surface chemical composition during activation is monitored by Auger Electron Spectroscopy (AES) and the functional properties are evaluated by pumping speed measurements. The pumping speed characteristics are quite similar to those already measured for commercially available NEG materials, except for the much lower saturation coverage for CO. This inconvenience, which is due to the smooth surface structure of these films, can be counteracted by increasing the roughness of the substrate.

  14. Electromagnetic characterization of nonevaporable getter properties between 220–330 and 500–750 GHz for the Compact Linear Collider damping rings

    Directory of Open Access Journals (Sweden)

    E. Koukovini-Platia

    2017-01-01

    Full Text Available Due to its effective pumping ability, nonevaporable getter (NEG coating is considered for the vacuum chambers of the Compact Linear Collider (CLIC electron damping rings (EDR. The aim is to suppress fast beam ion instabilities. The electromagnetic (EM characterization of the NEG properties up to ultra-high frequencies is required for the correct impedance modeling of the damping ring (DR components. The properties are determined using rectangular waveguides which are coated with NEG. The method is based on a combination of complex transmission coefficient S_{21} measurements with a vector network analyzer (VNA and 3D simulations using CST Microwave Studio® (CST MWS. The frequency ranges discussed in this paper are 220–330 and 500–750 GHz.

  15. Superconducting proximity effect for in situ and model layered systems

    Energy Technology Data Exchange (ETDEWEB)

    Finnemore, D.K.

    1980-01-01

    The primary drawback for in situ composites is that the ac losses are higher than for mechanically produced multifilamentary wire. To develop an understanding of the proximity effect so that analytical expressions will be available for design, a model system is developed based on PbCd. Items discussed include boundary conditions at SN interface, phonon spectral function, supercurrents through normal barriers, flux entry fields, and implications for in situ composites. (GHT)

  16. Functional outcome following proximal humeral interlocking system plating for displaced proximal humeral fractures

    OpenAIRE

    Thyagarajan David; Haridas Samarth; Jones Denise; Dent Colin; Evans Richard; Williams Rhys

    2009-01-01

    Aim: To assess the functional outcome following internal fixation with the PHILOS (proximal humeral interlocking system) for displaced proximal humeral fractures. Patients and Methods: We reviewed 30 consecutive patients treated surgically with the proximal humeral locking plate for a displaced proximal humeral fracture. Functional outcome was determined using the American Shoulder and Elbow Society (ASES) score and Constant Murley score. Results: Average age of the patients was 58 years...

  17. Best Proximity Points for a New Class of Generalized Proximal Mappings

    Directory of Open Access Journals (Sweden)

    Tayyab Kamran

    2017-03-01

    Full Text Available The best proximity points are usually used to find the optimal approximate solution of the operator equation Tx = x, when T has no fixed point. In this paper, we prove some best proximity point theorems for nonself multivalued operators, following the foot steps of Basha and Shahzad [Best proximity point theorems for generalized proximal contractions, Fixed Point Theory Appl., 2012, 2012:42].

  18. Biomechanical superiority of plate fixation for proximal tibial osteotomy.

    Science.gov (United States)

    Hartford, James M; Hester, Peter; Watt, Phil M; Hamilton, Doris; Rohmiller, Michael; Pienkowski, David

    2003-07-01

    Proximal tibial osteotomies require secure and durable fixation to allow early range of motion; however, biomechanical data comparing commonly used fixation methods are lacking. The current study was done to quantify the dynamic biomechanical performance of blade staple fixation and plate fixation of simulated proximal tibial osteotomies. A 15 degrees proximal tibial osteotomy was done on each of 18 synthetic adult composite tibias. Blade staples were used as the means of fixation in nine tibias; plate fixation was used in the remaining nine tibias. The specimens were stressed cyclically in sinusoidal loading whose peak compression and tension loads imitate those measured during normal gait. Device performance was quantified by measuring displacement at the osteotomy site and the number of cycles to failure. Plate fixation had a greater fatigue life than staples (eight plates surviving past 200,000 cycles versus one blade staple) and showed a trend toward less displacement (0.69 mm versus 0.97 mm). Plate fixation of proximal tibial osteotomies offers better fixation and dynamic mechanical performance than blade staples.

  19. Children's Attentional Processing of Mother and Proximity Seeking.

    Directory of Open Access Journals (Sweden)

    Guy Bosmans

    Full Text Available Attachment expectations regarding the availability of mother as a source for support are supposed to influence distressed children's support seeking behavior. Because research is needed to better understand the mechanisms related to support seeking behavior, this study tested the hypothesis that the cognitive processing of mother-related information is linked to proximity and support seeking behavior. Uncertainty in maternal support has been shown to be characterized by a biased attentional encoding of mother, reducing the breadth of children's attentional field around her. We investigated whether this attentional bias is related to how long distressed children wait before seeking their mother's proximity. Thirty-three children (9-11 years participated in this study that consisted of experimental tasks to measure attentional breadth and to observe proximity seeking behavior and of questionnaires to measure confidence in maternal support and experienced distress. Results suggested that distressed children with a more narrow attentional field around their mother wait longer to seek her proximity. Key Message: These findings provide a first support for the hypothesis that the attentional processing of mother is related to children's attachment behavior.

  20. Preliminary phytochemical screening, proximate and elemental ...

    African Journals Online (AJOL)

    The seed powder of Moringa oleifera was analysed for its phytochemical, proximate and elemental composition using Folin-Denis spectrophotometric method, gravimetric method and energy dispersing X-ray fluorescence (EDXRF) transmission emission technique respectively. The seed powder had the following proximate ...

  1. Bimalleolar ankle fracture with proximal fibular fracture

    NARCIS (Netherlands)

    Colenbrander, R. J.; Struijs, P. A. A.; Ultee, J. M.

    2005-01-01

    A 56-year-old female patient suffered a bimalleolar ankle fracture with an additional proximal fibular fracture. This is an unusual fracture type, seldom reported in literature. It was operatively treated by open reduction and internal fixation of the lateral malleolar fracture. The proximal fibular

  2. Grouping by Proximity in Haptic Contour Detection

    Science.gov (United States)

    Overvliet, Krista E.; Krampe, Ralf Th.; Wagemans, Johan

    2013-01-01

    We investigated the applicability of the Gestalt principle of perceptual grouping by proximity in the haptic modality. To do so, we investigated the influence of element proximity on haptic contour detection. In the course of four sessions ten participants performed a haptic contour detection task in which they freely explored a haptic random dot display that contained a contour in 50% of the trials. A contour was defined by a higher density of elements (raised dots), relative to the background surface. Proximity of the contour elements as well as the average proximity of background elements was systematically varied. We hypothesized that if proximity of contour elements influences haptic contour detection, detection will be more likely when contour elements are in closer proximity. This should be irrespective of the ratio with the proximity of the background elements. Results showed indeed that the closer the contour elements were, the higher the detection rates. Moreover, this was the case independent of the contour/background ratio. We conclude that the Gestalt law of proximity applies to haptic contour detection. PMID:23762364

  3. Proximate analysis on four edible mushrooms ADEDAYO ...

    African Journals Online (AJOL)

    Michael Horsfall

    Vol. 15 (1) 9 - 11. Full-text Available Online at www.bioline.org.br/ja. Proximate analysis on four edible mushrooms. ADEDAYO, MAJEKODUNMI RACHEL. Nigerian Stored Product Research Institute, P.M.B.3032, Kano. ABSTRACT: Proximate study was conducted on four edible mushrooms commonly found in farmlands in.

  4. Proximate Sources of Collective Teacher Efficacy

    Science.gov (United States)

    Adams, Curt M.; Forsyth, Patrick B.

    2006-01-01

    Purpose: Recent scholarship has augmented Bandura's theory underlying efficacy formation by pointing to more proximate sources of efficacy information involved in forming collective teacher efficacy. These proximate sources of efficacy information theoretically shape a teacher's perception of the teaching context, operationalizing the difficulty…

  5. Phytochemical screening, proximate analysis and anticonvulsant ...

    African Journals Online (AJOL)

    Spigelia anthelmia is used traditionally in Southern Nigeria for the treatment of infant convulsion and epilepsy. This study investigated the phytochemical constituents, proximate analysis and anticonvulsant effect of the methanolic extract of Spigelia anthelmia. Phytochemical evaluation and proximate analysis was carried ...

  6. Surface analytical investigations on the interaction of the getter ZrCo with hydrogen and on the effect of different contamination gases on the ability to store hydrogen; Oberflaechenanalytische Untersuchungen zur Wechselwirkung des Getters ZrCo mit Wasserstoff und zum Einfluss verschiedener Kontaminationsgase auf die Wasserstoffspeicherfaehigkeit

    Energy Technology Data Exchange (ETDEWEB)

    Glasbrenner, H.

    1991-07-11

    The first aim of this work was, apart from obtaining information on the initial material ZrCo regarding the existing compounds and their concentration at the surface, at the interface and in the bulk material, also to obtain information on the activation process. The interaction of the alloy ZrCo with hydrogen and its installation in the grid were to be examined next. The study of the interaction of ZrCo with contamination gases such as carbon oxides, carbohydrates, oxygen and nitrogen and the specialist products produced is another important subject, which is dealt with in this work. With the aid of these results, the effect of the trace gases always present in the process gas on the ability of the getter to store hydrogen, should be cleared up. (orig./DG) [Deutsch] Erstes Ziel der vorliegenden Arbeit war es, neben Aussagen ueber das Ausgangsmaterial ZrCo bezueglich der vorhandenen Verbindungen und deren Konzentrationen an der Oberflaeche, im Interface und im Bulkmaterial auch Informationen ueber den Aktivierungsprozess zu erhalten. Als naechstes sollte die Wechselwirkung der Legierung ZrCo mit Wasserstoff und dessen Einbau in das Gitter untersucht werden. Das Studium der Wechselwirkung von ZrCo mit Kontaminationsgasen wie Kohlenoxiden, Kohlenwasserstoffen, Sauerstoff und Stickstoff und die Speziation entstandener Produkte ist ein weiteres wichtiges Thema, das in dieser Arbeit behandelt wird. Mit Hilfe dieser Ergebnisse sollte der Einfluss dieser im Prozessgas stets vorhandenen Spurengase auf die Wasserstoffspeicherkapazitaet des Getters geklaert werden. (orig./DG)

  7. Mechanics

    CERN Document Server

    Chester, W

    1979-01-01

    When I began to write this book, I originally had in mind the needs of university students in their first year. May aim was to keep the mathematics simple. No advanced techniques are used and there are no complicated applications. The emphasis is on an understanding of the basic ideas and problems which require expertise but do not contribute to this understanding are not discussed. How­ ever, the presentation is more sophisticated than might be considered appropri­ ate for someone with no previous knowledge of the subject so that, although it is developed from the beginning, some previous acquaintance with the elements of the subject would be an advantage. In addition, some familiarity with element­ ary calculus is assumed but not with the elementary theory of differential equations, although knowledge of the latter would again be an advantage. It is my opinion that mechanics is best introduced through the motion of a particle, with rigid body problems left until the subject is more fully developed. Howev...

  8. Intramedullary compression device for proximal ulna fracture.

    Science.gov (United States)

    Hong, Choon Chiet; Han, Fucai; Decruz, Joshua; Pannirselvam, Vinodhkumar; Murphy, Diarmuid

    2015-02-01

    Proximal ulna fractures account for 20% of all proximal forearm fractures. Many treatment options are available for such fractures, such as cast immobilisation, plate and screw fixation, tension band wiring and intramedullary screw fixation, depending on the fracture pattern. Due to the subcutaneous nature of the proximal forearm, it is vulnerable to open injuries over the dorsal aspect of the proximal ulna. This may in turn prove challenging, as it is critical to obtain adequate soft tissue coverage to reduce the risk of implant exposure and bony infections. We herein describe a patient with a Gustillo III-B open fracture of the proximal ulna, treated with minimally invasive intramedullary screw fixation using a 6.0-mm cannulated headless titanium compression screw (FusiFIX, Péronnas, France).

  9. Proximity coupling in superconductor-graphene heterostructures.

    Science.gov (United States)

    Lee, Gil-Ho; Lee, Hu-Jong

    2018-02-16

    This review discusses the electronic properties and the prospective research directions of superconductor-graphene heterostructures. The basic electronic properties of graphene are introduced to highlight the unique possibility of combining two seemingly unrelated physics, superconductivity and relativity. We then focus on graphene-based Josephson junctions, one of the most versatile superconducting quantum devices. The various theoretical methods that have been developed to describe graphene Josephson junctions are examined, together with their advantages and limitations, followed by a discussion on the advances in device fabrication and the relevant length scales. The phase-sensitive properties and phase-particle dynamics of graphene Josephson junctions are examined to provide an understanding of the underlying mechanisms of Josephson coupling via graphene. Thereafter, microscopic transport of correlated quasiparticles produced by Andreev reflections at superconducting interfaces and their phase-coherent behaviors are discussed. Quantum phase transitions studied with graphene as an electrostatically tunable two-dimensional platform are reviewed. The interplay between proximity-induced superconductivity and the quantum-Hall phase is discussed as a possible route to study topological superconductivity and non-Abelian physics. Finally, a brief summary on the prospective future research directions is given. © 2018 IOP Publishing Ltd.

  10. Proximal Alternating Direction Method with Relaxed Proximal Parameters for the Least Squares Covariance Adjustment Problem

    Directory of Open Access Journals (Sweden)

    Minghua Xu

    2014-01-01

    Full Text Available We consider the problem of seeking a symmetric positive semidefinite matrix in a closed convex set to approximate a given matrix. This problem may arise in several areas of numerical linear algebra or come from finance industry or statistics and thus has many applications. For solving this class of matrix optimization problems, many methods have been proposed in the literature. The proximal alternating direction method is one of those methods which can be easily applied to solve these matrix optimization problems. Generally, the proximal parameters of the proximal alternating direction method are greater than zero. In this paper, we conclude that the restriction on the proximal parameters can be relaxed for solving this kind of matrix optimization problems. Numerical experiments also show that the proximal alternating direction method with the relaxed proximal parameters is convergent and generally has a better performance than the classical proximal alternating direction method.

  11. The Life Saving Effects of Hospital Proximity

    DEFF Research Database (Denmark)

    Bertoli, Paola; Grembi, Veronica

    We assess the lifesaving effect of hospital proximity using data on fatality rates of road-traffic accidents. While most of the literature on this topic is based on changes in distance to the nearest hospital triggered by hospital closures and use OLS estimates, our identification comes from......) increases the fatality rate by 13.84% on the sample average. This is equal to a 0.92 additional death per every 100 accidents. We show that OLS estimates provide a downward biased measure of the real effect of hospital proximity because they do not fully solve spatial sorting problems. Proximity matters...

  12. STRaND-2: Visual inspection, proximity operations & nanosatellite docking

    Science.gov (United States)

    Bridges, C. P.; Taylor, B.; Horri, N.; Underwood, C. I.; Kenyon, S.; Barrera-Ars, J.; Pryce, L.; Bird, R.

    The Surrey Training Research and Nanosatellite Demonstrator (STRaND) programme has been success in identifying and creating a leading low-cost nanosatellite programme with advanced attitude and orbit control system (AOCS) and experimental computing platforms based on smart-phone technologies. The next demonstration capabilities, that provide a challenging mission to the existing STRaND platform, is to perform visual inspection, proximity operations and nanosatellite docking. Visual inspection is to be performed using a COTS LIDAR system to estimate range and pose under 100 m. Proximity operations are controlled using a comprehensive guidance, navigation and control (GNC) loop in a polar form of the Hills Clohessy Wiltshire (HCW) frame including J2 perturbations. And finally, nanosatellite docking is performed at under 30 cm using a series of tuned magnetic coils. This paper will document the initial experiments and calculations used to qualify LIDAR components, size the mission thrust and tank requirements, and air cushion table demonstrations of the docking mechanism.

  13. Affordable dual-sensing proximity sensor for touchless interactive systems

    KAUST Repository

    Nassar, Joanna M.

    2016-09-13

    We report an ultra-low cost flexible proximity sensor using only off-the-shelf recyclable materials such as aluminum foil, napkin and double-sided tape. Unlike previous reports, our device structure exhibits two sensing capabilities in one platform, with outstanding long detection range of 20 cm and pressure sensitivity of 0.05 kPa. This is the first ever demonstration of a low-cost, accessible, and batch manufacturing process for pressure and proximity sensing on a singular platform. The mechanical flexibility of the sensor makes it possible to mount on various irregular platforms, which is vital in many areas, such as robotics, machine automation, vehicular technology and inspection tools.

  14. Research on Proximity Magnetic Field Influence in Measuring Error of Active Electronic Current Transformers

    Directory of Open Access Journals (Sweden)

    Wu Weijiang

    2016-01-01

    Full Text Available The principles of the active electronic current transformer (ECT are introduced, and the mechanism of how a proximity magnetic field can influence the measuring of errors is analyzed from the perspective of the sensor section of the ECT. The impacts on active ECTs created by three-phase proximity magnetic field with invariable distance and variable distance are simulated and analyzed. The theory and simulated analysis indicate that the active ECTs are sensitive to proximity magnetic field under certain conditions. According to simulated analysis, a product structural design and the location of transformers at substation sites are suggested for manufacturers and administration of power supply, respectively.

  15. Proximity and Collaboration in European Nanotechnology

    NARCIS (Netherlands)

    Cunningham, S.W.; Werker, C.

    2011-01-01

    Collaborations are particularly important for the development and deployment of technology. We analyze the influence of organizational, technological and geographical proximity on European nanotechnology collaborations with the help of a publication dataset and additional geographical information.

  16. Promoting proximal formative assessment with relational discourse

    Science.gov (United States)

    Scherr, Rachel E.; Close, Hunter G.; McKagan, Sarah B.

    2012-02-01

    The practice of proximal formative assessment - the continual, responsive attention to students' developing understanding as it is expressed in real time - depends on students' sharing their ideas with instructors and on teachers' attending to them. Rogerian psychology presents an account of the conditions under which proximal formative assessment may be promoted or inhibited: (1) Normal classroom conditions, characterized by evaluation and attention to learning targets, may present threats to students' sense of their own competence and value, causing them to conceal their ideas and reducing the potential for proximal formative assessment. (2) In contrast, discourse patterns characterized by positive anticipation and attention to learner ideas increase the potential for proximal formative assessment and promote self-directed learning. We present an analysis methodology based on these principles and demonstrate its utility for understanding episodes of university physics instruction.

  17. Proximate composition and cholesterol concentrations of ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-05-18

    DWB) for raw and fried samples, respectively, but decreased to 295.20 ... Key words: Rhynchophorus phoenicis, Oryctes monoceros, proximate composition, cholesterol, heat treatment. INTRODUCTION. Insects have played ...

  18. COMPARATIVE ANALYSIS OF PROXIMATE COMPOSITIONS OF ...

    African Journals Online (AJOL)

    Babatunde Emmanuel

    2011-10-06

    Oct 6, 2011 ... Fish allows for protein improved nutrition in that it has a high biological value in terms of high ... marine algae upon which the fish feed [11]. ... Proximate composition of catfish Clarias gariepinus and Tarpon atlanticus were.

  19. Phytochemical screening, proximate analysis and acute toxicity ...

    African Journals Online (AJOL)

    Phytochemical screening, proximate analysis and acute toxicity studies were carried out on the leaf extract of Cola lepidota, in accordance with established standard procedures. The proximate analysis reveals a moisture content of 27.43 ± 3.11 % w/w, total ash value 9.32 ± 0.27 % w/w, acid insoluble ash 3.12 ± 1.05 % w/w ...

  20. Proximate, Mineral and Phytochemical Composition of Dioscorea ...

    African Journals Online (AJOL)

    ADOWIE PERE

    ABSTRACT: Proximate, mineral and phytochemical composition of Dioscorea dumetorum tubers was investigated using standard procedures. Proximate analysis included in g% dry weight: crude protein (6.44 ± 0.32), crude fat (0.75 ± 0.04), crude fibre (15.00 ± 0.56), total ash. (3.45 ± 0.20) and a moisture content of 70.04 ...

  1. Painful Spastic Hip Dislocation: Proximal Femoral Resection

    OpenAIRE

    Albiñana, Javier; Gonzalez-Moran, Gaspar

    2002-01-01

    The dislocated hip in a non-ambulatory child with spastic paresis tends to be a painful interference to sleep, sitting upright, and perineal care. Proximal femoral resection-interposition arthroplasty is one method of treatment for this condition. We reviewed eight hips, two bilateral cases, with a mean follow-up of 30 months. Clinical improvement was observed in all except one case, with respect to pain relief and sitting tolerance. Some proximal migration was observed in three cases, despit...

  2. Proximity sensor system development. CRADA final report

    Energy Technology Data Exchange (ETDEWEB)

    Haley, D.C. [Oak Ridge National Lab., TN (United States); Pigoski, T.M. [Merrit Systems, Inc. (United States)

    1998-01-01

    Lockheed Martin Energy Research Corporation (LMERC) and Merritt Systems, Inc. (MSI) entered into a Cooperative Research and Development Agreement (CRADA) for the development and demonstration of a compact, modular proximity sensing system suitable for application to a wide class of manipulator systems operated in support of environmental restoration and waste management activities. In teleoperated modes, proximity sensing provides the manipulator operator continuous information regarding the proximity of the manipulator to objects in the workspace. In teleoperated and robotic modes, proximity sensing provides added safety through the implementation of active whole arm collision avoidance capabilities. Oak Ridge National Laboratory (ORNL), managed by LMERC for the United States Department of Energy (DOE), has developed an application specific integrated circuit (ASIC) design for the electronics required to support a modular whole arm proximity sensing system based on the use of capacitive sensors developed at Sandia National Laboratories. The use of ASIC technology greatly reduces the size of the electronics required to support the selected sensor types allowing deployment of many small sensor nodes over a large area of the manipulator surface to provide maximum sensor coverage. The ASIC design also provides a communication interface to support sensor commands from and sensor data transmission to a distributed processing system which allows modular implementation and operation of the sensor system. MSI is a commercial small business specializing in proximity sensing systems based upon infrared and acoustic sensors.

  3. Transformations through Proximity Flying: A Phenomenological Investigation

    Science.gov (United States)

    Holmbom, Maria; Brymer, Eric; Schweitzer, Robert D.

    2017-01-01

    Participation in extreme sports has been linked to personal transformations in everyday life. Descriptions of lived experience resulting from transformative experiences are limited. Proximity flying, a relatively new discipline involving BASE jumping with a wingsuit where participants fly close to solid structures, is arguably one of the most extreme of extreme sports. The aim of this paper, part of a larger phenomenological study on the lived experience of proximity flying, is to explicate the ways in which participating in proximity flying influences the everyday lives of participants. Interpretative phenomenological analysis was used to explicate the lived experience of six proximity pilots. An analysis of interview transcripts revealed three significant themes describing the lived experience of participants. First, experiences of change were described as positive and skills developed through proximity flying were transferable into everyday life. Second, transformative experiences were considered fundamental to participants’ perspectives on life. Third, experience of transformation influenced their sense of personal identity and facilitated flourishing in other aspects of everyday life. Participants were clear that their experiences in proximity flying facilitated a profound process of transformation which manifest as changes in everyday capabilities and behaviors, values and sense of identity. PMID:29104552

  4. The Effect of Cement Placement on Augmentation of the Osteoporotic Proximal Femur

    OpenAIRE

    Sutter, Edward G.; Wall, Simon J.; Mears, Simon C; Belkoff, Stephen M.

    2010-01-01

    Femoroplasty, the augmentation of the proximal femur, has been shown in biomechanical studies to increase the energy required to produce a fracture and therefore may reduce the risk of such injuries. The purpose of our study was to test the hypotheses that: (1) 15 mL of cement was sufficient to mechanically augment the proximal femur, (2) there was no difference in augmentation effect between cement placement in the intertrochanteric region and in the femoral neck, and (3) cement placement in...

  5. Life-history evolution: understanding the proximate mechanisms

    Indian Academy of Sciences (India)

    history evolution, I was required to write a term paper for a course on 'Advanced evolutionary biol- ogy'. Having worked in the laboratory for about six months and read through numerous papers on life-history evolution,. I was convinced that ...

  6. Proximal mechanisms for sound production in male Pacific walruses

    DEFF Research Database (Denmark)

    Larsen, Ole Næsbye; Reichmuth, Colleen

    2012-01-01

    The songs of male walruses during the breeding season have been noted to have some of the most unusual characteristics that have been observed among mammalian sounds. In contrast to the more guttural vocalizations of most other carnivores, their acoustic displays have impulsive and metallic...... impulsive and metallic signals, we conducted a series of in situ studies with two captive adult male Pacific walruses that were trained for voluntary participation in bioacoustic research. Through a combination of observational, acoustic, endoscopic, and ultrasonic methods, we confirmed the probable...... features more similar to those found in industrial work places than in nature. The patterned knocks and bells that comprise male songs are not thought to be true vocalizations, but rather, sounds produced with structures other than the vocal tract and larynx. To determine how male walruses produce and emit...

  7. Anomalies in cell volume and electronic properties in getter annealed YBa{sub 2}(CuM){sub 3}O{sub y}, M=Ni

    Energy Technology Data Exchange (ETDEWEB)

    Oesterreicher, H.; Ko, D. [California Univ., San Diego, La Jolla, CA (United States). Dept. of Chemistry

    1998-05-01

    Structural and magnetic data on getter annealed YBa{sub 2}(Cu{sub 0.95}M{sub 0.05}){sub 3}O{sub y}, M=Ni are presented. Similar to unsubstituted materials, but different from M=Fe, getter annealings at intermediary temperatures (753 K) produce an extended orthorhombic superconducting region with abrupt cell volume (V) shrinkage around y{proportional_to}6.50. This orthorhombicity, denoted O42, corresponds most nearly to conventional phenomenology with long chains on Cu(1) with four-(1)4- and two fold-(1)2- O coordination. 673 K annealings produce a smaller orthorhombic range with considerable reduction in T{sub c}. This region is diagnosed to be based on new structural motifs with larger amounts of orthorhombically arranged three fold O coordination (1)3. A yet stronger trend to orthorhombicity based on (1)3, denoted O3, pertains to high temperature annealings (1023 K) which produce a monotonic structural development in c-axis with no stepwise contraction and absence of T{sub c} to y{proportional_to}6.8. This is also the behavior obtained on direct quenching from elevated temperatures which can in addition result in anomalous cell volume expansion effects (V+) near y=6.5. These materials are further distinguished in that they do not superconduct when reoxygenated up to y{proportional_to}6.8. A general distinction in the phenomenology of RBa{sub 2}Cu{sub 3}O{sub y} is accordingly made between O filling based on (1)3 e.g. (1)3(1)4 (K phenomenology) and (1)2(1)4 (D, or disproportionation phenomenology). In connection with extrapolations from low temperature T{sub c} annealing effects it is realized that O42 pertains only to a limited low temperature modification with reversible ladder type transitions to O3 at intermediary temperatures for substituted and unsubstituted compounds. (orig.) 30 refs.

  8. Treatment of three- and four-part proximal humeral fractures with locking proximal humerus plate.

    Science.gov (United States)

    Sun, Jing-Cheng; Li, Yu-Lin; Ning, Guang-Zhi; Wu, Qiang; Feng, Shi-Qing

    2013-08-01

    The purpose of this study was to evaluate the effectiveness and complications of the locking proximal humerus plate to treat proximal humerus fractures. A retrospective clinical trial. Department of Orthopaedics, Tianjin Medical University General Hospital. Sixty-eight consecutive patients with three- or four-part fractures of the proximal humerus were treated with locking proximal humerus plates. The deltopectoral anterolateral acromial approach was used to the proximal humerus; open reduction and locking proximal humerus plate were applied. Constant Score was used to measure the shoulder functional recovery, and Visual Analog Scale (VAS) was used to measure subjective evaluation of pain. The radiology was observed. After average 26.7 months, the average Constant Score was 72.6 ± 13.2 points and the average VAS was 1.2 ± 0.8 points. All the complications such as screw perforation into the glenohumeral joint, screws loosening, soft tissue infections, avascular necrosis and delayed union occurred in eight cases (11.8 %). The effectiveness of the locking proximal humerus plate was similar to other published literatures on treating fractures of the proximal humerus; however, a lower complications rate in short follow-up time was observed in this study. It may potentially provide a favorable option for treating three- or four-part fractures of the proximal humerus. Dealing with each particular fracture pattern, surgeons should have a decision of appropriate way to internal fixation.

  9. [Bilateral proximal pulmonary embolism without associated hypoxemia. Case report].

    Science.gov (United States)

    Bahloul, M; Chtara, K; Turki, O; Kammoun, M M; Bouaziz, W; Bouaziz, M

    2017-10-01

    Pulmonary embolism is a classic complication in intensive care. It is characterized by hypoxemia secondary to perturbed ventilation/perfusion ratios. We report a case of proximal and bilateral pulmonary embolism that occurred without associated hypoxemia. A spiral computed tomography (CT) scan was performed to explore unexplained fever in a patient with a negative infectious investigation. We discuss the mechanisms underlying the absence of hypoxemia in this patient. A 43-year-old patient with no significant pathological history was admitted to intensive care for the management of multiple injuries following a road accident. During resuscitation, the patient developed a proximal and bilateral pulmonary embolism without signs of hypertension of the pulmonary artery or associated hypoxemia. The patient improved under treatment. This case shows that bilateral proximal pulmonary embolism may be associated with normal gas exchange. The absence of hypoxemia could be explained by the bilateral nature of the pulmonary embolism that led to balanced ventilation/perfusion ratios on both sides. Furthermore, bronchoconstriction was bilateral, explaining the maintenance of a stable ventilation/perfusion ratio on both sides. The presence of unexplained fever in a victim of multiple trauma, despite the absence of hypoxemia, suggests the diagnosis of pulmonary embolism. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  10. Reduced Insulin Receptor Expression Enhances Proximal Tubule Gluconeogenesis.

    Science.gov (United States)

    Pandey, Gaurav; Shankar, Kripa; Makhija, Ekta; Gaikwad, Anil; Ecelbarger, Carolyn; Mandhani, Anil; Srivastava, Aneesh; Tiwari, Swasti

    2017-02-01

    Reduced insulin receptor protein levels have been reported in the kidney cortex from diabetic humans and animals. We recently reported that, targeted deletion of insulin receptor (IR) from proximal tubules (PT) resulted in hyperglycemia in non-obese mice. To elucidate the mechanism, we examined human proximal tubule cells (hPTC) and C57BL/6 mice fed with high-fat diet (HFD, 60% fat for 20 weeks). Immunoblotting revealed a significantly lower protein level of IR in HFD compare to normal chow diet (NCD). Furthermore, a blunted rise in p-AKT 308 levels in the kidney cortex of HFD mice was observed in response to acute insulin (0.75 IU/kg body weight, i.p) relative to NCD n = 8/group, P gluconeogenesis. Transcript levels of the gluconeogenic enzyme PEPCK were significantly increased in cAMP/DEXA-stimulated hPTC cells (n = 3, P gluconeogenesis and PEPCK induction was significantly attenuated in IR (siRNA) silenced hPTC (n = 3, P gluconeogenesis. Thus reduced insulin signaling of the proximal tubule may contribute to hyperglycemia in the metabolic syndrome via elevated gluconeogenesis. J. Cell. Biochem. 118: 276-285, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  11. Transverse Stress Fracture of the Proximal Patella: A Case Report.

    Science.gov (United States)

    Atsumi, Satoru; Arai, Yuji; Kato, Ko; Nishimura, Akinobu; Nakazora, Shigeto; Nakagawa, Shuji; Ikoma, Kazuya; Fujiwara, Hiroyoshi; Sudo, Akihiro; Kubo, Toshikazu

    2016-02-01

    Among stress fractures associated with sports activities, patellar stress fracture is rare. Regarding patella stress fractures, so far only distal transverse or lateral longitudinal fractures have been reported, but there are no reports of transverse fractures occurring in the proximal patella. We describe an extremely rare case of transverse stress fracture of proximal patella in a 9-year-old athlete.A 9-year old boy, who participated in sports (sprints and Kendo) presented with left knee pain without any external injury. In plain radiographs, a fracture line was observed in the proximal 1/3 of the left patella, and a patella stress fracture was diagnosed. For treatment, because 7 months of conservative therapy showed no improvement, internal fixation was carried out using Acutrak screws, and bone union was thus achieved. Three months after the operation, he was able to return to his previous level of athletic sports activity.Regarding the mechanism of onset, it is believed that the causes are longitudinal traction force and patellofemoral contact pressure. On the other hand, the contact region of the patella with the femur changes with the flexion angle of the knee. In the current case, the fracture occurred at a site where the patella was in contact with the femur at a flexion angle of >90°, so it is believed that it occurred as a clinical condition from being subjected to repeated longitudinal traction force and patellofemoral contact pressure at a flexion angle of >90°, during the sports activities of sprints and Kendo. The nonunion of the transverse stress fracture of his proximal patella was successfully treated with internal fixation using Acutrak screws.

  12. Investigating magnetic proximity effects at ferrite/Pt interfaces

    Science.gov (United States)

    Collet, M.; Mattana, R.; Moussy, J.-B.; Ollefs, K.; Collin, S.; Deranlot, C.; Anane, A.; Cros, V.; Petroff, F.; Wilhelm, F.; Rogalev, A.

    2017-11-01

    Spintronic devices based on pure spin currents have drawn a lot of attention during the last few years for low energy device design. One approach to generate pure spin currents is to combine a metallic or insulating ferromagnetic layer with a non-magnetic metallic layer with a large spin-orbit coupling. A recent controversy has arisen in the possible role of magnetic proximity effects at ferromagnetic/non-magnetic interfaces, which can hamper the understanding of pure spin current generation mechanisms. While magnetic proximity effects have been frequently observed at ferromagnetic metal/non-magnetic interfaces, there are only a few studies on ferromagnetic insulator/non-magnetic interfaces. Regarding the use of ferromagnetic insulators, the focus has been mainly on yttrium iron garnet (YIG). However, investigation of induced magnetic moments at YIG/Pt interfaces has engendered contradictory results. Here, we propose to study insulating ferrites for which electronic and magnetic properties can be modulated. Magnetic proximity effects have been investigated at MnFe2O4/Pt, CoFe2O4/Pt, and NiFe2O4/Pt interfaces by X-ray circular magnetic dichroism (XMCD) measurements at the Pt L3 edge. Although hybridization with Pt seems to be different among the ferrites, we do not detect any XMCD signal as the signature of an induced magnetism in Pt. We have then studied the Fe3O4 ferrite below and above the Verwey transition temperature. No XMCD signal has been measured in the insulating or conducting phase of Fe3O4. This suggests that the absence of magnetic proximity effects at ferrite/Pt interfaces is not linked to the insulating character or not of the ferrites.

  13. Locking plate fixation for proximal humerus fractures.

    LENUS (Irish Health Repository)

    Burke, Neil G

    2012-02-01

    Locking plates are increasingly used to surgically treat proximal humerus fractures. Knowledge of the bone quality of the proximal humerus is important. Studies have shown the medial and dorsal aspects of the proximal humeral head to have the highest bone strength, and this should be exploited by fixation techniques, particularly in elderly patients with osteoporosis. The goals of surgery for proximal humeral fractures should involve minimal soft tissue dissection and achieve anatomic reduction of the head complex with sufficient stability to allow for early shoulder mobilization. This article reviews various treatment options, in particular locking plate fixation. Locking plate fixation is associated with a high complication rate, such as avascular necrosis (7.9%), screw cutout (11.6%), and revision surgery (13.7%). These complications are frequently due to the varus deformation of the humeral head. Strategic screw placement in the humeral head would minimize the possibility of loss of fracture reduction and potential hardware complications. Locking plate fixation is a good surgical option for the management of proximal humerus fractures. Complications can be avoided by using better bone stock and by careful screw placement in the humeral head.

  14. Pumping characteristics of the St707 non-evaporable getter (Zr 70-V 24.6-Fe 5.4 wt%)

    CERN Document Server

    Benvenuti, Cristoforo

    1996-01-01

    The room temperature pumping speeds of the St707 Non-Evaporable Getter (NEG) have been measured both for individual gases and for gas mixtures as a function of the quantities of gas pumped. The interesting feature of this NEG consists in its moderately low activation temperature. Therefore particular attention has been devoted to defining the optimum temperature and duration of the activation process to obtain the highest possible pumping speed in a given practical situation. It has been found that heating at 400° C for about one hour or at 350° C for one day, results in pumping speeds of about 1000 ls-1m-1 for H2 , 2000 ls-1m-1 for CO and 450 ls-1m-1 for N2, values very close to those obtained after activation at the higher temperature of 740° C. The St707 NEG is therefore particularly suitable for passive activation during bakeout of stainless steel vacuum systems, avoiding the need of electrical insulation and feedthroughs which are mandatory when activation is carried out by resistive heating.

  15. Effect of the temperature and the porosity of the gettering process on the removal of heavy metals from Tunisian phosphate rock

    Science.gov (United States)

    Daik, R.; Lajnef, M.; Amor, S. B.; Ezzaouia, H.

    Gettering is a process by which unwanted impurities are removed by providing an alternative location, this method used by many researchers for the purification of silicon wafers or powder. In this work, this method is used for the first time to remove the impurities from Tunisian phosphate rock (TPR). This method consists in two steps: the rapid thermal processing by infrared furnace followed by a rapid chemical etching. In order to enhance the efficiency of this process, a porous layer on the surface of grains was grown. By this method, we have demonstrated in this present work that the majority of impurities were well extracted from TPR. UV-visible absorption spectra show that the highest intensity of absorbance (∼1) appears for the porous sample treated at 900 °C (P900 °C), which due to the presence of large quantities of impurities in the extracted solution. These results were well confirmed by AAS and ICP-AES which show that the majority of the impurities have been almost removed for the P900 °C sample.

  16. Industrial Computed Tomography using Proximal Algorithm

    KAUST Repository

    Zang, Guangming

    2016-04-14

    In this thesis, we present ProxiSART, a flexible proximal framework for robust 3D cone beam tomographic reconstruction based on the Simultaneous Algebraic Reconstruction Technique (SART). We derive the proximal operator for the SART algorithm and use it for minimizing the data term in a proximal algorithm. We show the flexibility of the framework by plugging in different powerful regularizers, and show its robustness in achieving better reconstruction results in the presence of noise and using fewer projections. We compare our framework to state-of-the-art methods and existing popular software tomography reconstruction packages, on both synthetic and real datasets, and show superior reconstruction quality, especially from noisy data and a small number of projections.

  17. Correlation between social proximity and mobility similarity.

    Science.gov (United States)

    Fan, Chao; Liu, Yiding; Huang, Junming; Rong, Zhihai; Zhou, Tao

    2017-09-20

    Human behaviors exhibit ubiquitous correlations in many aspects, such as individual and collective levels, temporal and spatial dimensions, content, social and geographical layers. With rich Internet data of online behaviors becoming available, it attracts academic interests to explore human mobility similarity from the perspective of social network proximity. Existent analysis shows a strong correlation between online social proximity and offline mobility similarity, namely, mobile records between friends are significantly more similar than between strangers, and those between friends with common neighbors are even more similar. We argue the importance of the number and diversity of common friends, with a counter intuitive finding that the number of common friends has no positive impact on mobility similarity while the diversity plays a key role, disagreeing with previous studies. Our analysis provides a novel view for better understanding the coupling between human online and offline behaviors, and will help model and predict human behaviors based on social proximity.

  18. [Disorders of sex development and proximal hypospadias].

    Science.gov (United States)

    Oswald, J

    2016-01-01

    Children with ambiguous genitalia due to different chromosome or gonadal sex are a particular challenge concerning the diagnostic and therapeutic implications. Proximal hypospadias patients with normal gonadal development should be distinguished from children with DSD (disorders of sex development) to guarantee normal gender identity and the best possible surgical therapy. This paper focuses on the terminology, embryology, and pathophysiology of the different manifestations of DSD. The state of knowledge about this disease pattern with particular emphasis on proximal hypospadias based on national and international scientific discussions is presented. The different clinical pictures as well as therapeutic options of DSD with a special focus on recent literature and giving particular attention to patients with proximal hypospadias are presented. Because of the complexity of patients suffering from disorders of sex development an interdisciplinary DSD healthcare team including a paediatric endocrinologist as well as paediatric urologist should be provided. These specialists enable an accurate diagnosis in severe hypospadias patients without reference to DSD diseases patterns.

  19. Infiltrating/sealing proximal caries lesions

    DEFF Research Database (Denmark)

    Martignon, S; Ekstrand, K R; Gomez, J

    2012-01-01

    This randomized split-mouth controlled clinical trial aimed at assessing the therapeutic effects of infiltration vs. sealing for controlling caries progression on proximal surfaces. Out of 90 adult students/patients assessed at university clinics and agreeing to participate, 39, each with 3...... differences in lesion progression between infiltration and placebo (P = 0.0012) and between sealing and placebo (P = 0.0269). The study showed that infiltration and sealing are significantly better than placebo treatment for controlling caries progression on proximal lesions. No significant difference...... proximal lesions identified radiographically around the enamel-dentin junction to the outer third of the dentin, were included. Lesions were randomly allocated for treatment to test-A (Infiltration: ICON-pre-product; DMG), test-B (Sealing: Prime-Bond-NT; Dentsply), or control-C (Placebo). Primary outcome...

  20. Knowledge networks in the Dutch aviation industry: The proximity paradox

    NARCIS (Netherlands)

    Broekel, T.; Boschma, R.A.

    2012-01-01

    The importance of geographical proximity for interaction and knowledge sharing has been discussed extensively in recent years. There is increasing consensus that geographical proximity is just one out of many types of proximities that might be relevant. We argue that proximity may be a crucial

  1. The developmental spectrum of proximal radioulnar synostosis

    Energy Technology Data Exchange (ETDEWEB)

    Elliott, Alison M. [University of Manitoba, Winnipeg Regional Health Association Program of Genetics and Metabolism, Winnipeg, MB (Canada); University of Manitoba, Department of Paediatrics and Child Health, Winnipeg, MB (Canada); University of Manitoba, Department of Biochemistry and Medical Genetics, Winnipeg, MB (Canada); University of Manitoba, WRHA Program of Genetics and Metabolism, Departments of Paediatrics and Child Health, Biochemistry and Medical Genetics, Winnipeg, MB (Canada); Kibria, Lisa [University of Manitoba, Department of School of Medical Rehabilitation, Winnipeg, MB (Canada); Reed, Martin H. [University of Manitoba, Department of Paediatrics and Child Health, Winnipeg, MB (Canada); University of Manitoba, Department of Biochemistry and Medical Genetics, Winnipeg, MB (Canada); University of Manitoba, Department of Diagnostic Imaging, Winnipeg, MB (Canada)

    2010-01-15

    Proximal radioulnar synostosis is a rare upper limb malformation. The elbow is first identifiable at 35 days (after conception), at which stage the cartilaginous anlagen of the humerus, radius and ulna are continuous. Subsequently, longitudinal segmentation produces separation of the distal radius and ulna. However, temporarily, the proximal ends are united and continue to share a common perichondrium. We investigated the hypothesis that posterior congenital dislocation of the radial head and proximal radioulnar fusion are different clinical manifestations of the same primary developmental abnormality. Records were searched for ''proximal radioulnar fusion/posterior radial head dislocation'' in patients followed at the local Children's Hospital and Rehabilitation Centre for Children. Relevant radiographic, demographic and clinical data were recorded. Ethics approval was obtained through the University Research Ethics Board. In total, 28 patients met the inclusion criteria. The majority of patients (16) had bilateral involvement; eight with posterior dislocation of the radial head only; five had posterior radial head dislocation with radioulnar fusion and two had radioulnar fusion without dislocation. One patient had bilateral proximal radioulnar fusion and posterior dislocation of the left radial head. Nine patients had only left-sided involvement, and three had only right-sided involvement.The degree of proximal fusion varied, with some patients showing 'complete' proximal fusion and others showing fusion that occurred slightly distal to the radial head: 'partially separated.' Associated disorders in our cohort included Poland syndrome (two patients), Cornelia de Lange syndrome, chromosome anomalies (including tetrasomy X) and Cenani Lenz syndactyly. The suggestion of a developmental relationship between posterior dislocation of the radial head and proximal radioulnar fusion is supported by the fact that both anomalies

  2. preliminary phytochemical screening, proximate and elemental

    African Journals Online (AJOL)

    DR. AMINU

    ABSTRACT. The seed powder of Moringa oleifera was analysed for its phytochemical, proximate and elemental composition using Folin-Denis spectrophotometric method, gravimetric method and energy dispersing X-ray fluorescence (EDXRF) transmission emission technique respectively. The seed powder had the ...

  3. Proximate, mineral composition, antioxidant activity, and total ...

    African Journals Online (AJOL)

    Four varieties of the red pepper fruits (Capsicum species) were evaluated for chemical composition, antioxidant activity and total phenolic contents using standard analytical technique, ferric-ion reducing antioxidant potential (FRAP) assay and Folin-Colcalteau method respectively. The proximate composition values ...

  4. 9__43 - 50__Tijjani_Proximate

    African Journals Online (AJOL)

    User

    Sena et al., 1998). In Nigeria, the plant is commonly consumed by the Hausa speaking communities as a spice and a sauce (Ibrahim et al., 2012). However, during preparation the leaves and stem are not carefully separated before processing of food. Thus, the present study was aimed at evaluating the proximate, minerals ...

  5. Phytochemistry and proximate composition of ginger ( Zingiber ...

    African Journals Online (AJOL)

    ... a little crude fibre content of 0.92 %. The results indicated that ginger rhizome is an excellent natural remedy for a wide range of ailments. Keywords: Zingiber officinale, spice, rhizome, phytochemistry, proximate analysis, Zingiberaceae, zingerone, methanolic extraction. Journal of Pharmaceutical and Allied Sciences, Vol.

  6. DEPRESSIONARY EFFECT OF PROXIMITY OF RESIDENTIAL ...

    African Journals Online (AJOL)

    Osondu

    2012-10-24

    Oct 24, 2012 ... opinions are analyzed and it revealed that the site has major impacts on the residents perceived quality of life, security and ... Key words: Landfill, Property value, Health and safety, Residential property, Solous. Introduction. The location ... Proximity to landfills and hazardous waste sites can severely affect ...

  7. Renal fibrosis: Primacy of the proximal tubule.

    Science.gov (United States)

    Gewin, Leslie S

    2018-02-06

    Tubulointerstitial fibrosis (TIF) is the hallmark of chronic kidney disease and best predictor of renal survival. Many different cell types contribute to TIF progression including tubular epithelial cells, myofibroblasts, endothelia, and inflammatory cells. Previously, most of the attention has centered on myofibroblasts given their central importance in extracellular matrix production. However, emerging data focuses on how the response of the proximal tubule, a specialized epithelial segment vulnerable to injury, plays a central role in TIF progression. Several proximal tubular responses such as de-differentiation, cell cycle changes, autophagy, and metabolic changes may be adaptive initially, but can lead to maladaptive responses that promote TIF both through autocrine and paracrine effects. This review discusses the current paradigm of TIF progression and the increasingly important role of the proximal tubule in promoting TIF both in tubulointerstitial and glomerular injuries. A better understanding and appreciation of the role of the proximal tubule in TIF has important implications for therapeutic strategies to halt chronic kidney disease progression. Copyright © 2017 International Society of Matrix Biology. Published by Elsevier B.V. All rights reserved.

  8. 182 179 Comparative Study on the Proximate

    African Journals Online (AJOL)

    2008-12-02

    Dec 2, 2008 ... Key words: Annona squamosa, Fruits, Proximate, Minerals, nutrient density. INTRODUCTION. Sugar apple (Annona squamosa) also called. “Gwanda masar” in Hausa belong to the family. Annonacae. The most widely grown of all the species are A. muricata, A. cherimola, A reticulata, A. senegalensis and ...

  9. Phytochemical Screening, Proximate and Mineral Composition of ...

    African Journals Online (AJOL)

    Leaves of sweet potato (Ipomoea batatas) grown in Tepi area was studied for their class of phytochemicals, mineral and proximate composition using standard analytical methods. The phytochemical screening revealed the presence of alkaloids, flavonoid, terpenoids, saponins, quinones, phenol, tannins, amino acid and ...

  10. Phytochemical screening, proximate and elemental analysis of ...

    African Journals Online (AJOL)

    Citrus sinensis was screened for its phytochemical composition and was evaluated for the proximate and elemental analysis. The phytochemical analysis indicated the presence of reducing sugar, saponins, cardiac glycosides, tannins and flavonoids. The elemental analysis indicated the presence of the following mineral ...

  11. Phytochemical Screening and Proximate Analysis of Newbouldia ...

    African Journals Online (AJOL)

    The study was conducted to assess the phytochemical and proximate composition of Newboudia laevis leaves and Allium sativum bulb extracts. The leaves and bulbs extracts were analyzed for their chemical composition and antinutritional factors (ANFs) which include moisture, crude protein, crude fat, crude fiber, total ash ...

  12. Disability occurrence and proximity to death

    NARCIS (Netherlands)

    Klijs, Bart; Mackenbach, Johan P.; Kunst, Anton E.

    2010-01-01

    Purpose. This paper aims to assess whether disability occurrence is related more strongly to proximity to death than to age. Method. Self reported disability and vital status were available from six annual waves and a subsequent 12-year mortality follow-up of the Dutch GLOBE longitudinal study.

  13. [Four family members with proximal myotonic myopathy

    NARCIS (Netherlands)

    Tieleman, A.A.; Velden, M.P. van der; Visser, M.C.; Wokke, J.H.J.; Scheffer, H.; Engelen, B.G.M. van

    2004-01-01

    A 41-year-old woman had a 15-year history of pain in her thighs and arms, which also became weaker, and a decrease in visual acuity. Her 35-year-old brother, their 38-year-old sister and their 64-year-old mother also had myalgia, myotonia and proximal muscle weakness, and the women also had

  14. Phytochemical screening, proximate and elemental analysis of ...

    African Journals Online (AJOL)

    ... was about 0.01 in concentration. Proximate analysis also shows that it has a high nutritional value such as carbohydrate, fibre, Ash, fat and protein. These results recommended the consumption of these peels of desired physiochemical properties as sources of food fibres or low-calorie bulk ingredients in food applications ...

  15. Proximate composition and consumer acceptability of African ...

    African Journals Online (AJOL)

    The aim of the study was to assess the organoleptic differences of Clarias gariepinus smoked with two different energy sources, Anogeissus leiocarpus and Tamarindus indica with the help of a hedonic scale and to determine possible proximate composition difference between the smoked products. Smoking of the fishes ...

  16. Controllable proximity effect in superconducting hybrid devices

    NARCIS (Netherlands)

    Bakurskiy, S.V.

    2015-01-01

    This thesis is devoted to the study of controllable proximity effects in superconductors, both in terms of fundamental aspects and applications. As a part of this thesis theoretical description was suggested for a number of structures with superconducting electrodes and multiple interlayers. These

  17. Proximate, chemical compositions and sulphur concentrations on ...

    African Journals Online (AJOL)

    0, 10, 20, 50, 100, 150, 200, 250 and 300 ppm) on the nutritional value and the proximate composition of six selected mango cultivars (Tommy Atkins, Peach, Saber, Sunshine, Keitt and Vhavenda) grown in South Africa. The study shows that ...

  18. Proximate composition, bread characteristics and sensory ...

    African Journals Online (AJOL)

    This study was carried out to investigate proximate composition, bread characteristics and sensory evaluation of cocoyam-wheat composite breads at different levels of cocoyam flour substitution for human consumption.A whole wheat bread (WWB) and cocoyam-composite breads (CCB1,CCB 2 and CCB 3) were prepared ...

  19. Evaluation of the Proximate, Chemical and Phytochemical ...

    African Journals Online (AJOL)

    The increased interest in the utilization of the leaves of Moringa oleifera necessitated this study which evaluated the proximate, chemical and phytochemical composition, especially the presence of anti- physiological and toxic factors in the leaves. The results of the phytochemical analyses were: alkaloid 1.24 ± 0.141%; ...

  20. comparative proximate composition and antioxidant vitamins

    African Journals Online (AJOL)

    DR. AMINU

    ABSTRACT. The proximate composition and antioxidant vitamins analysis of two varieties of honey (dark amber and light amber) were carried out using standard methods. The values for moisture, ash, crude lipid, crude protein and crude carbohydrate contents of the two honeys, (light amber and dark amber) are 9.39 ...

  1. Proximate composition and cholesterol concentrations of ...

    African Journals Online (AJOL)

    Proximate composition and cholesterol concentrations of Rhynchophorus phoenicis and Oryctes monoceros larvae subjected to different heat treatments. ... 514.63 mg/100g dry weight basis (DWB) for raw and fried samples, respectively, but decreased to 295.20 mg/100 g DWB in the smoke-dried samples. Similarly, the ...

  2. Preliminary Phytochemical Screening, Elemental and Proximate ...

    African Journals Online (AJOL)

    The study aimed at phytochemical screening, elemental and proximate composition of two varieties of Cyperus esculentus (tiger nut) big yellow and small brown nuts using standard methods. The phytochemicals tested for were alkaloid, saponin, tannin, glycoside, flavonoid, steroid and resin. All the aforementioned ...

  3. Protein biomarker validation via proximity ligation assays.

    Science.gov (United States)

    Blokzijl, A; Nong, R; Darmanis, S; Hertz, E; Landegren, U; Kamali-Moghaddam, M

    2014-05-01

    The ability to detect minute amounts of specific proteins or protein modifications in blood as biomarkers for a plethora of human pathological conditions holds great promise for future medicine. Despite a large number of plausible candidate protein biomarkers published annually, the translation to clinical use is impeded by factors such as the required size of the initial studies, and limitations of the technologies used. The proximity ligation assay (PLA) is a versatile molecular tool that has the potential to address some obstacles, both in validation of biomarkers previously discovered using other techniques, and for future routine clinical diagnostic needs. The enhanced specificity of PLA extends the opportunities for large-scale, high-performance analyses of proteins. Besides advantages in the form of minimal sample consumption and an extended dynamic range, the PLA technique allows flexible assay reconfiguration. The technology can be adapted for detecting protein complexes, proximity between proteins in extracellular vesicles or in circulating tumor cells, and to address multiple post-translational modifications in the same protein molecule. We discuss herein requirements for biomarker validation, and how PLA may play an increasing role in this regard. We describe some recent developments of the technology, including proximity extension assays, the use of recombinant affinity reagents suitable for use in proximity assays, and the potential for single cell proteomics. This article is part of a Special Issue entitled: Biomarkers: A Proteomic Challenge. © 2013.

  4. Phytochemical screening, proximate and elemental analysis of ...

    African Journals Online (AJOL)

    Michael Horsfall

    2009). The aim of this study was to analyses the extract of. Citrus sinensis peels for the phytochemical, proximate and elemental composition. MATERIALS AND METHODS. Plant materials Fresh peels of Citrus sinensis were collected from Uselu market in Benin City, Edo. State, Nigeria. It was identified and authenticated by.

  5. Keldysh proximity action for disordered superconductors

    Indian Academy of Sciences (India)

    Abstract. We review a novel approach to the superconductive proximity effect in dis- ordered normal–superconducting (N–S) structures. The method is based on the multi- charge Keldysh action and is suitable for the treatment of interaction and fluctuation effects. As an application of the formalism, we study the subgap ...

  6. Impurity/defect interactions during MeV Si{sup +} ion implantation annealing

    Energy Technology Data Exchange (ETDEWEB)

    Agarwal, A.; Koveshnikov, S.; Christensen, K. [North Carolina State Univ., Raleigh, NC (United States)] [and others

    1995-08-01

    Ion implantation of dopant atoms at MeV energies is currently being explored in several integrated circuit device manufacturing processes. MeV implantation offers immediate advantages such as vertical well modulation, latch-up protection, device structure isolation, and reduced temperature processing. Simultaneously, it presents an opportunity to achieve {open_quotes}proximity{close_quotes} gettering of impurities from the active device region by placing high impurity solubility and/or secondary defect gettering sites within microns of the surface. If the MeV implanted species is a dopant ion, all three gettering mechanisms, i.e, segregation, relaxation and injection, can be involved in the gettering process, complicating the analysis and optimization of the process. However, investigation of gettering using non-dopant Si{sup +} ion damage allows the relaxation component of the gettering process to be isolated and examined separately. In general, gettering is verified by a reduction in impurity concentration in the region of interest, usually the device region, and/or a build-up of concentration/precipitation in a non-device sink region. An alternate and more meaningful approach is to use simple devices as materials characterization probes via changes in the electrical activity of the gettering sites. Device space charge probes also allow the evolution of the defect sites upon contamination to be tracked. We report here results of the electrical, structural, and chemical characterization of MeV implanted Si{sup +} damage using Deep Level Transient Spectroscopy (DLTS), Transmission Electron Microscopy (TEM), and Secondary Ion Mass Spectroscopy (SIMS). The damage has been characterized both as a function of annealing from 600 to 1100{degrees}C for 1 hr, and after contamination with Fe followed by low temperature gettering annealing.

  7. Proximal tubular hypertrophy and enlarged glomerular and proximal tubular urinary space in obese subjects with proteinuria.

    Directory of Open Access Journals (Sweden)

    Ana Tobar

    Full Text Available BACKGROUND: Obesity is associated with glomerular hyperfiltration, increased proximal tubular sodium reabsorption, glomerular enlargement and renal hypertrophy. A single experimental study reported an increased glomerular urinary space in obese dogs. Whether proximal tubular volume is increased in obese subjects and whether their glomerular and tubular urinary spaces are enlarged is unknown. OBJECTIVE: To determine whether proximal tubules and glomerular and tubular urinary space are enlarged in obese subjects with proteinuria and glomerular hyperfiltration. METHODS: Kidney biopsies from 11 non-diabetic obese with proteinuria and 14 non-diabetic lean patients with a creatinine clearance above 50 ml/min and with mild or no interstitial fibrosis were retrospectively analyzed using morphometric methods. The cross-sectional area of the proximal tubular epithelium and lumen, the volume of the glomerular tuft and of Bowman's space and the nuclei number per tubular profile were estimated. RESULTS: Creatinine clearance was higher in the obese than in the lean group (P=0.03. Proteinuria was similarly increased in both groups. Compared to the lean group, the obese group displayed a 104% higher glomerular tuft volume (P=0.001, a 94% higher Bowman's space volume (P=0.003, a 33% higher cross-sectional area of the proximal tubular epithelium (P=0.02 and a 54% higher cross-sectional area of the proximal tubular lumen (P=0.01. The nuclei number per proximal tubular profile was similar in both groups, suggesting that the increase in tubular volume is due to hypertrophy and not to hyperplasia. CONCLUSIONS: Obesity-related glomerular hyperfiltration is associated with proximal tubular epithelial hypertrophy and increased glomerular and tubular urinary space volume in subjects with proteinuria. The expanded glomerular and urinary space is probably a direct consequence of glomerular hyperfiltration. These effects may be involved in the pathogenesis of obesity

  8. [Arthroscopic fracture management in proximal humeral fractures].

    Science.gov (United States)

    Lill, H; Katthagen, C; Jensen, G; Voigt, C

    2013-04-01

    Arthroscopy has become increasingly more established in the treatment of proximal humeral fractures. In addition to the known advantages of minimally invasive surgery fracture and implant positioning can be optimized and controlled arthroscopically and relevant intra-articular concomitant pathologies (e.g. biceps tendon complex and rotator cuff) can be diagnosed and treated. Arthroscopic techniques have proven to be advantageous in the treatment of various entities of greater tuberosity fractures, lesser tuberosity fractures (suture bridging technique) and subcapital humeral fractures (arthroscopic nailing). This article presents an overview on innovative arthroscopic modalities for treating proximal humeral fractures, describes the surgical techniques and the advantages compared to open procedures as well as initial clinical results.

  9. SINA: A test system for proximity fuses

    Science.gov (United States)

    Ruizenaar, M. G. A.

    1989-04-01

    SINA, a signal generator that can be used for testing proximity fuses, is described. The circuitry of proximity fuses is presented; the output signal of the RF circuit results from a mixing of the emitted signal and received signal that is Doppler shifted in frequency by the relative motion of the fuse with respect to the reflecting target of surface. With SINA, digitized and stored target and clutter signals (previously measured) can be transformed to Doppler signals, for example during a real flight. SINA can be used for testing fuse circuitry, for example in the verification of results of computer simulations of the low frequency Doppler signal processing. The software of SINA and its use are explained.

  10. Tunable Magnetic Proximity Effects in Graphene Junctions

    Science.gov (United States)

    Lazic, Predrag; Belashchenko, Kirill; Zutic, Igor

    2015-03-01

    The characteristic length of the magnetic proximity effects exceed the thickness of a graphene layer leading to an important, but typically overlooked, modifications of equilibrium and transport properties, as well as the implications for graphene spintronics. Using the first-principles studies that integrate a real space density functional theory (GPAW) with the state-of-the art boundary elements electrostatic code based on the Robin Hood method, we explore tunable electronic structure and magnetic proximity effects in the ferromagnet/insulator/graphene junctions. We show that the inclusion of a finite-size gate electrodes and van der Walls interaction lead to nontrivial effects that could also be important in other two-dimensional materials beyond graphene. Work supported by US ONR, NSF-DMR and Nebraska NSF MRSEC.

  11. Management of Proximal Third Arm Replantation

    Directory of Open Access Journals (Sweden)

    Süleyman Taş

    2017-12-01

    Full Text Available Notwithstanding the recent success in major limb replantation achieved through the advancements in microsurgical techniques, the viability of the extremity is still relatively low at the transhumeral level following a replantation. There are no exact guidelines for deciding whether to undertake a stump repair or a replantation in such amputations at the proximal level. However, a highly motivated patient with realistic expectations and protected shoulder function can be a candidate to undergo replantation. The replanted arm may help the uninjured arm in daily activities. In this report we present the case of a 47-year-old man whose arm was amputated at proximal third level by an asphalt machine and successfully replanted together with the encountered problems and their solutions. The roadmap followed in this rare case may be a guide for hand surgeons.

  12. Dedifferentiated chondrosarcoma of right proximal femur

    Directory of Open Access Journals (Sweden)

    Sachin A Badge

    2016-01-01

    Full Text Available Dedifferentiated chondrosarcoma (DDCS comprises approximately 10% of all chondrosarcomas. The tumor generally occurs after the age of 50 years, with equal distribution among males and females. It is most often located in the bones of the pelvis, the proximal femur or humerus, the distal femur, and the ribs. Regardless of treatment, the prognosis is ominous with 90% of patients dying with distant metastases within 2 years. We report a case of DDCS of right proximal femur in a 73-year-old woman. The most important factors affecting survival are early recognition of the radiographic features, adequate histological sampling, and wide-margin resection of the lesion. So for the correct histopathological diagnosis the biopsy sample should be adequate to visualize both cartilaginous and noncartilaginous sarcomatous component which helps to increase the survival of patients before the distant metastasis occurs.

  13. Management of Acute Proximal Humeral Fractures.

    Science.gov (United States)

    Kancherla, Vamsi Krishna; Singh, Anshuman; Anakwenze, Oke A

    2017-01-01

    Proximal humeral fractures, which typically occur in elderly persons, are among the most common fractures. A myriad of nonsurgical and surgical treatment options exist for these injuries, including short-term immobilization and early physical therapy, percutaneous fixation, plate osteosynthesis, intramedullary nailing, hemiarthroplasty, and reverse shoulder arthroplasty. The choice of treatment depends on the fracture type and severity, surgeon expertise, patient age, and patient health status.

  14. Superconducting proximity effect in clean ferromagnetic layers

    OpenAIRE

    Zareyan, M.; Belzig, W.; Nazarov, Yu. V.

    2002-01-01

    We investigate the superconducting proximity effect in clean ferromagnetic layers with rough boundaries. The subgap density of states is formed by Andreev bound states at energies which depend on trajectory length and the ferromagnetic exchange field. At energies above the gap, the spectrum is governed by resonant scattering states. The resulting density of states, measurable by tunneling spectroscopy, exhibits a rich structure, which allows us to connect the theoretical parameters from exper...

  15. Alternating proximal algorithm for blind image recovery

    OpenAIRE

    Bolte, Jérôme; Combettes, Patrick Louis; Pesquet, Jean-Christophe

    2010-01-01

    International audience; We consider a variational formulation of blind image recovery problems. A novel iterative proximal algorithm is proposed to solve the associated nonconvex minimization problem. Under suitable assumptions, this algorithm is shown to have better convergence properties than standard alternating minimization techniques. The objective function includes a smooth convex data fidelity term and nonsmooth convex regularization terms modeling prior information on the data and on ...

  16. Isolated Proximal Tibiofibular Dislocation during Soccer

    Directory of Open Access Journals (Sweden)

    Casey Chiu

    2015-01-01

    Full Text Available Proximal tibiofibular dislocations are rarely encountered in the Emergency Department (ED. We present a case involving a man presenting to the ED with left knee pain after making a sharp left turn on the soccer field. His physical exam was only remarkable for tenderness over the lateral fibular head. His X-rays showed subtle abnormalities of the tibiofibular joint. The dislocation was reduced and the patient was discharged from the ED with orthopedic follow-up.

  17. Capacitive Proximity Sensor Has Longer Range

    Science.gov (United States)

    Vranish, John M.

    1992-01-01

    Capacitive proximity sensor on robot arm detects nearby object via capacitive effect of object on frequency of oscillator. Sensing element part of oscillator circuit operating at about 20 kHz. Total capacitance between sensing element and ground constitutes tuning capacitance of oscillator. Sensor circuit includes shield driven by replica of alternating voltage applied to sensing element. Driven shield concentrates sensing electrostatic field in exterior region to enhance sensitivity to object. Sensitivity and dynamic range has corresponding 12-to-1 improvement.

  18. THE PROXIMATE COMPOSITION OF AFRICAN BUSH MANGO ...

    African Journals Online (AJOL)

    BIG TIMMY

    The proximate analysis (moisture, crude protein, crude fat, mineral ash and total carbohydrates) in the kernels and flour of African Bush Mango (. ) were investigated. The results revealed that the kernels contained moisture (2.5 g/100 g), crude protein (8.9 g/100 g), crude fat (68.4 g/100 g), mineral ash (2.3 g/100 g) and total ...

  19. [Proximity and breastfeeding at the maternity hospital].

    Science.gov (United States)

    Fradin-Charrier, Anne-Claire

    2015-01-01

    The establishment of breastfeeding, as well as its duration, are facilitated through the proximity of the mother with her new baby. However, in maternity hospitals, breastfeeding mothers very often leave their baby in the nursery at night time. A study carried out in 2014 in several maternity hospitals put forward suggestions and highlighted areas to improve in everyday practice. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  20. Proximal Gastrojejunal Reconstruction after Pancreaticoduodenal Resection

    Directory of Open Access Journals (Sweden)

    M. Wayne

    2012-01-01

    Full Text Available Introduction. Reconstruction by proximal gastrojejunostomy, and distal biliary and pancreatic anastomoses is infrequently used after resection of the head of the pancreas because of fear of fistulas and cholangitis. Pancreaticoduodenectomy is being performed more frequently for cystic malignant and premalignant lesions. Because of this there is a need for endoscopic visualization and biopsy of the residual pancreatic duct, since multi-centricity is characteristic of some of these malignancies. Since endoscopic access of the bile duct and pancreatic duct is difficult and unsuccessful in 50–70% after B II or Roux Y reconstruction, we prospectively studied the merit and complications (early and late of proximal gastrojejunal (PGJ reconstruction after pancreaticoduodenal resection. Material and Methods. Thirty nine consecutive, non-radomized patients underwent pancreaticoduodenectomy and PGJ reconstruction over 14 mos. There were 21 males and 18 females. Results. 7 patients with IPMN have undergone repeat CT scanning for surveillance, with 3 requiring repeat EUS and ERCP. There were no technical difficulties accessing the pancreas or the pancreatic duct, supporting the PGJ reconstruction. Conclusion. Proximal gastrojejunal reconstruction following pancreaticoduodenal resection may be safely done with similar morbidity to traditional pancreaticojejunal reconstructions. PGJ reconstruction may be of greater value when direct visual access to the bile duct or pancreatic duct is necessary, and should be considered when doing resection for mucinous cysts or IPMN of the head of the pancreas.

  1. Bilateral, atraumatic, proximal tibiofibular joint instability.

    Science.gov (United States)

    Morrison, Troy D; Shaer, James A; Little, Jill E

    2011-01-01

    Dislocation of the tibiofibular joint is rare and usually results from a traumatic event. Only 1 case of atraumatic proximal tibiofibular joint instability in a 14-year-old girl has been reported in the literature, however this condition might occur more frequently than once thought. A wide range of treatment options exist for tibiofibular dislocations. Currently, the first choice is a conservative approach, and when this fails, surgical means such as resection of the fibula head, arthrodesis, and reconstruction are considered. However, no consensus exists on the most effective treatment. This article reports a unique case of bilateral, atraumatic, proximal tibia and fibular joint instability involving a 30-year-old man with a 20-year history of pain and laxity in the right knee. The patient had no trauma to his knees; he reported 2 immediate family members with similar complaints, which suggests that this case is likely congenital. After conservative approaches proved to be ineffective, the patient underwent capsular reconstruction using free autologous gracilis tendon. At 6-month postoperative follow-up, the patient was pain free with no locking and instability. He then underwent surgery on the left knee. At 1-year follow-up after the second surgery, the patient had no symptoms or restrictions in mobility. We provide an alternative surgical approach to arthrodesis and resection for the treatment of chronic proximal tibiofibular instability. In the treatment of chronic tibiofibular instability, we believe that reconstruction of the tibiofibular joint is a safe and effective choice. Copyright 2011, SLACK Incorporated.

  2. Calibrating animal-borne proximity loggers.

    Science.gov (United States)

    Rutz, Christian; Morrissey, Michael B; Burns, Zackory T; Burt, John; Otis, Brian; St Clair, James J H; James, Richard

    2015-06-01

    Growing interest in the structure and dynamics of animal social networks has stimulated efforts to develop automated tracking technologies that can reliably record encounters in free-ranging subjects. A particularly promising approach is the use of animal-attached 'proximity loggers', which collect data on the incidence, duration and proximity of spatial associations through inter-logger radio communication. While proximity logging is based on a straightforward physical principle - the attenuation of propagating radio waves with distance - calibrating systems for field deployment is challenging, since most study species roam across complex, heterogeneous environments.In this study, we calibrated a recently developed digital proximity-logging system ('Encounternet') for deployment on a wild population of New Caledonian crows Corvus moneduloides. Our principal objective was to establish a quantitative model that enables robust post hoc estimation of logger-to-logger (and, hence, crow-to-crow) distances from logger-recorded signal-strength values. To achieve an accurate description of the radio communication between crow-borne loggers, we conducted a calibration exercise that combines theoretical analyses, field experiments, statistical modelling, behavioural observations, and computer simulations.We show that, using signal-strength information only, it is possible to assign crow encounters reliably to predefined distance classes, enabling powerful analyses of social dynamics. For example, raw data sets from field-deployed loggers can be filtered at the analysis stage to include predominantly encounters where crows would have come to within a few metres of each other, and could therefore have socially learned new behaviours through direct observation. One of the main challenges for improving data classification further is the fact that crows - like most other study species - associate across a wide variety of habitats and behavioural contexts, with different signal

  3. Proximate chemical composition and fatty acid profiles of ...

    African Journals Online (AJOL)

    Proximate chemical composition and fatty acid profiles of Longissimus Proximate chemical composition and fatty acid profiles of Longissimus thoracis from pasture fed LHRH immunocastrated, castrated and intact Bos indicus bulls.

  4. Proximate Analysis and Total Lycopene Content of Some Tomato ...

    African Journals Online (AJOL)

    MBI

    2017-06-05

    Jun 5, 2017 ... Standard analytical techniques were employed to determine the proximate composition and lycopene content of three tomato cultivars namely: ... Keywords: Antioxidant, lycopene content, proximate composition, tomato cultivars. INTRODUCTION ..... from oranges, tomatoes and carrots. African. Journal of ...

  5. A Regularized Algorithm for the Proximal Split Feasibility Problem

    Directory of Open Access Journals (Sweden)

    Zhangsong Yao

    2014-01-01

    Full Text Available The proximal split feasibility problem has been studied. A regularized method has been presented for solving the proximal split feasibility problem. Strong convergence theorem is given.

  6. Temperature as a proximate factor in orientation behavior

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, W.W.

    1977-05-01

    Temperature serves as a proximate factor (cue, guidepost, sign stimulus, or directive factor) affecting locomotor responses of fishes. Although temperature can also serve as an ultimate ecological factor, as in behavioral thermoregulation, nonthermal factors may in some cases provide the ultimate adaptive or ecological value of a temperature response; some examples are habitat selection, intraspecific size segregation, interspecific niche differentiation, isolating mechanisms, predator avoidance, prey location, escape reactions, and migrations (thermoperiodic, diel, seasonal, spawning). Conversely, nonthermal variables such as light intensity or water depth may act as accessory proximate factors in thermoregulation. In spawning migrations, thermal requirements of eggs and larvae may take precedence over the (often different) preferenda or optima of adults. Although thermal responses of fishes are largely innate and species specific, ontogenetic and other changes can occur. Since temperature can serve as an unconditioned reinforcer in operant conditioning, thermal responses are not limited to simple kineses or taxes. Nonthermal factors such as photoperiod, circadian rhythms, currents, social and biotic interactions, stresses, infections, or chemicals can affect thermal responses, and may account for some lack of conformity between laboratory preferenda and field distributions and behaviors.

  7. Restoring proximal caries lesions conservatively with tunnel restorations

    Directory of Open Access Journals (Sweden)

    Chu CH

    2013-07-01

    Full Text Available Chun-Hung Chu1, May L Mei,1 Chloe Cheung,1 Romesh P Nalliah2 1Faculty of Dentistry, The University of Hong Kong, Hong Kong, People's Republic of China; 2Department of Restorative Dentistry and Biomaterials Sciences, Harvard School of Dental Medicine, Boston, MA, USA Abstract: The tunnel restoration has been suggested as a conservative alternative to the conventional box preparation for treating proximal caries. The main advantage of tunnel restoration over the conventional box or slot preparation includes being more conservative and increasing tooth integrity and strength by preserving the marginal ridge. However, tunnel restoration is technique-sensitive and can be particularly challenging for inexperienced restorative dentists. Recent advances in technology, such as the contemporary design of dental handpieces with advanced light-emitting diode (LED and handheld comfort, offer operative dentists better vision, illumination, and maneuverability. The use of magnifying loupes also enhances the visibility of the preparation. The advent of digital radiographic imaging has improved dental imaging and reduced radiation. The new generation of restorative materials has improved mechanical properties. Tunnel restoration can be an option to restore proximal caries if the dentist performs proper case selection and pays attention to the details of the restorative procedures. This paper describes the clinical technique of tunnel restoration and reviews the studies of tunnel restorations. Keywords: operative, practice, tunnel preparation, composite, amalgam, glass ionomer

  8. Proximity Utilizing Biotinylation of Nuclear Proteins in vivo

    Directory of Open Access Journals (Sweden)

    Arman Kulyyassov

    2015-06-01

    Full Text Available Introduction. The human genome consists of roughly 30,000 genes coding for over 500,000 different proteins, of which more than 10,000 proteins can be produced by the cell at any given time (the cellular “proteome”. It has been estimated that over 80% of proteins do not operate alone, but in complexes. These protein-protein interactions (PPI are regulated by several mechanisms. For example, post-translational modifications (methylation, acetylation, phosphorylation, or ubiquitination or metal-binding can lead to conformational changes that alter the affinity and kinetic parameters of the interaction. Many PPIs are part of larger cellular networks of interactions or interactomes. Indeed, these interactions are at the core of the entire interactomics system of any living cell, and so, aberrant PPIs are the basis of multiple diseases, such as neurodegenerative diseases and cancer. The objective of this study was to develop a method of monitoring protein-protein interactions and proximity dependence in vivo.Methods. The biotin ligase BirA was fused to the protein of interest, and the Biotin Acceptor Peptide (BAP was fused to an interacting partner to make the detection of its biotinylation possible by western blot or mass spectrometry.Results. Using several experimental systems (BirA.A + BAP.B, we showed that the biotinylation is interaction/proximity dependent. Here, A and B are the next nuclear proteins used in the experiments – 3 paralogues of heterochromatin protein HP1a (CBX5, HP1b (CBX1, HP1g (CBX3, wild type and transcription mutant factor Kap1, translesion DNA polymerase PolH and E3, ubiquitin ligase RAD18, Proliferative Cell Nuclear Antigen (PCNA, ubiquitin Ub, SUMO-2/3, different types and isoforms of histones H2A, H2Az, H3.1, H3.3, CenpA, H2A.BBD, and macroH2A. The variant of this approach is termed PUB-NChIP (Proximity Utilizing Biotinylation with Native Chromatin Immuno-precipitation and is designed to purify and study the protein

  9. The regional dimension of intergenerational proximity in the Netherlands

    NARCIS (Netherlands)

    van der Pers, Marieke; Mulder, Clara H.

    Previous research has shown the impact of individual characteristics on intergenerational proximity but has largely ignored the regional dimension of such proximity. In this paper, we examine the regional variation in intergenerational proximity in the Netherlands. We address this issue by

  10. Quality Assessment and Proximate Analysis of Amaranthus hybridus ...

    African Journals Online (AJOL)

    The aim of this research is to determine the quality and proximate composition of Amaranthus hybridus, Celosia argentea, and Talinum triangulare obtained from open markets in Benin City, Nigeria. Microbiological and proximate analysis were carried out using standard methods. Results of the proximate analysis revealed ...

  11. Proximal femur geometry in the adult Kenyan femur and its ...

    African Journals Online (AJOL)

    Background: Numerous orthopaedic procedures are carried out on the proximal femur. For optimal hip function, these procedures must restore the anatomy of the proximal femur to as near normal as possible. There are currently no local studies that have described in detail the normal anatomy of the proximal femur and its ...

  12. Minimally Invasive Fixation for Proximal Humeral Fracture: A Review on the use of T2 Proximal Humeral Nail

    Directory of Open Access Journals (Sweden)

    Sze-Ling Iris Ngai

    2013-12-01

    Discussion and conclusion: With the proper surgical technique high union rate, good functional recovery, and low complication rate can be achieved by using T2 Proximal Humeral Nail in managing traumatic proximal humeral fracture.

  13. Delayed homicides and the proximate cause.

    Science.gov (United States)

    Lin, Peter; Gill, James R

    2009-12-01

    Delayed homicides result from complications of remote injuries inflicted by "the hands of another." The investigation of delayed homicides may be a challenge due to a number of factors including: failure to report the death to the proper authorities, lack of ready and adequate documentation of the original injury and circumstances, and jurisdictional differences between the places of injury and death. The certification of these deaths also requires the demonstration of a pathophysiologic link between the remote injury and death. In sorting through these issues, it is helpful to rely upon the definition of the proximate cause of death. Over a 2-year period in New York City, there were 1211 deaths certified as homicide of which 42 were due to injuries sustained greater than 1 year before death. The survival interval ranged from 1.3 to 43.2 years. The most common immediate causes of death were: infections (22), seizures (7), and intestinal obstructions/hernias (6). Common patterns of complications included infection following a gunshot wound of the spinal cord, seizure disorder due to blunt head trauma, and intestinal obstruction/hernia due to adhesions from an abdominal stab wound. Spinal cord injuries resulted in paraplegia in 14 instances and quadriplegia in 8. The mean survival interval for paraplegics was 20.3 years and 14.8 years for quadriplegics; infections were a frequent immediate cause of death in both groups, particularly infections due to chronic bladder catheterization. The definition of proximate cause originated with civil law cases and was later applied to death certification as the proximate cause of death. The gradual extinction of the "year and a day rule" for the limitation of bringing homicide charges in delayed deaths may result in more of these deaths going to trial. Medical examiners/coroners must be able to explain the reasoning behind these death certifications and maintain consistent standards for the certification of all delayed deaths due

  14. Laparoscopic proximal gastrectomy with oblique jejunogastrostomy.

    Science.gov (United States)

    Tanaka, Kimitaka; Ebihara, Yuma; Kurashima, Yo; Nakanishi, Yoshitsugu; Asano, Toshimichi; Noji, Takehiro; Murakami, Soichi; Nakamura, Toru; Tsuchikawa, Takahiro; Okamura, Keisuke; Shichinohe, Toshiaki; Hirano, Satoshi

    2017-05-10

    Proximal early gastric cancer is a good indication for totally laparoscopic proximal gastrectomy (TLPG) with double-tract reconstruction (DTR). However, when most of the dietary intake passes through the escape route of the jejunum, the functional benefits of proximal gastrectomy might be similar to those after total gastrectomy. Our DTR procedure was improved for easy passage through the remnant stomach. The purposes of this study were to present a novel technique for intracorporeal DTR using linear staplers after TLPG and to investigate surgical outcomes. DTR was performed using linear staplers only. A side-to-side jejunogastrostomy with twisting of both the remnant stomach and the anal jejunum was performed for the purpose of passing meals through the remnant stomach (an oblique jejunogastrostomy technique). The ten patients who underwent TLPG with DTR from January 2011 to August 2016 in Hokkaido University Hospital were retrospectively reviewed. Their clinicopathological characteristics and surgical and postoperative outcomes were collected and analyzed. The median duration of operation was 285 (range 146-440) min. No patients required blood transfusions. The number of dissected lymph nodes was 32 (range 22-56). There were no intraoperative complications, and no cases were converted to open surgery. All the patients were pT1N0M0 stage IA. No anastomotic leakage or complications were detected. Postoperative gastrography after reconstruction showed that contrast medium flowed mainly to the remnant stomach. The average percentage body weight loss was 14.0 ± 7.1% at 10 months. The average percentage decrease in serum hemoglobin was 5.4 ± 10.4% at 12 months. This novel technique for intracorporeal DTR provided a considerable advantage by the passage of dietary intake to the remnant stomach after LPG.

  15. Proximal Tubule Cell Hypothesis for Cardiorenal Syndrome in Diabetes

    Directory of Open Access Journals (Sweden)

    Akihiko Saito

    2011-01-01

    Full Text Available Incidence of cardiovascular disease (CVD is remarkably high among patients with chronic kidney disease (CKD, even in the early microalbuminuric stages with normal glomerular filtration rates. Proximal tubule cells (PTCs mediate metabolism and urinary excretion of vasculotoxic substances via apical and basolateral receptors and transporters. These cells also retrieve vasculoprotective substances from circulation or synthesize them for release into the circulation. PTCs are also involved in the uptake of sodium and phosphate, which are critical for hemodynamic regulation and maintaining the mineral balance, respectively. Dysregulation of PTC functions in CKD is likely to be associated with the development of CVD and is linked to the progression to end-stage renal disease. In particular, PTC dysfunction occurs early in diabetic nephropathy, a leading cause of CKD. It is therefore important to elucidate the mechanisms of PTC dysfunction to develop therapeutic strategies for treating cardiorenal syndrome in diabetes.

  16. Microsatellite instability in cancer of the proximal colon

    Energy Technology Data Exchange (ETDEWEB)

    Thibodeau, S.N.; Bren, G.; Schaid, D. (Mayo Clinic and Foundation, Rochester, MN (United States))

    1993-05-07

    Colorectal tumor DNA was examined for somatic instability at (CA)[sub n] repeats on human chromosomes 5q, 15q, 17p, and 18q. Differences between tumor and normal DNA were detected in 25 of the 90 (28 percent) tumors examined. This instability appeared as either a substantial change in repeat length (often heterogeneous in nature) or a minor change (typically two base pairs). Microsatellite instability was significantly correlated with the tumor's location in the proximal colon (P = 0.003), with increased patient survival (P = 0.02), and, inversely, with loss of heterozygosity for chromosomes 5q, 17p, and 18q. These data suggest that some colorectal cancers may arise through a mechanism that does not necessarily involve loss of heterozygosity. 23 refs., 2 figs., 3 tabs.

  17. Cushing proximal symphalangism and the NOG and GDF5 genes

    Energy Technology Data Exchange (ETDEWEB)

    Plett, Sara K. [Columbia University, College of Physicians and Surgeons, New York, NY (United States); Berdon, Walter E.; Oklu, Rahmi [Columbia Presbyterian Medical Center, Department of Radiology, New York, NY (United States); Cowles, Robert A. [Morgan Stanley Children' s Hospital of New York-Presbyterian, Division of Pediatric Surgery, Department of Surgery, New York, NY (United States); Campbell, John B. [Arnold Palmer Hospital for Children, Department of Radiology, Orlando, FL (United States)

    2008-02-15

    Proximal symphalangism (SYM1) is an autosomal-dominant developmental disorder of joint fusion. This disorder is best known from famous historical descriptions of two large kindred: Cushing's description in 1916 of the ''straight-fingered'' Brown family of Virginia and Drinkwater's description in 1917 of the British Talbot family of noble blood, descended from the English war hero John Talbot, the first Earl of Shrewsbury (1388-1453). Recent genetic studies link this phenotype to expression of abnormal genes at future joint sites: too little expression of NOG, a growth antagonist, or overexpression of GDF5, a growth agonist, results in cartilage overgrowth and bony fusion. This review unites in depth the first historical accounts of SYM1 with a clinical description and reviews the current understanding of the molecular mechanism underlying what is likely the oldest dominant trait ever studied. (orig.)

  18. Stability of acute dorsal fracture dislocations of the proximal interphalangeal joint: a biomechanical study.

    Science.gov (United States)

    Tyser, Andrew R; Tsai, Michael A; Parks, Brent G; Means, Kenneth R

    2014-01-01

    We performed a cadaveric biomechanical study to characterize proximal interphalangeal joint stability after an injury to different amounts of the volar articular base of the middle phalanx (intact, 20%, 40%, 60%, and 80% volar defects). Eighteen digits on 6 hands were tested through full proximal interphalangeal joint range of motion using computer-controlled flexion and extension via the digital tendons. We collected proximal interphalangeal joint kinematic cine data in a true lateral projection with mini-fluoroscopy. We measured the amount of dorsal middle phalanx translation in full proximal interphalangeal joint extension. As we cycled the joint from full flexion into extension, we recorded the angle at which subluxation occurred. No specimens with 20% volar bony defect subluxated. All specimens in the 60% and 80% groups subluxated at an average flexion angle of 67° (range, 10° to 90°) in the 60% group and at all degrees of flexion in the 80% group. In the 40% group, 28% of specimens demonstrated subluxation at an average flexion angle of 14° (range, 4° to 40°). Mean dorsal translation of the middle phalanx in relation to the proximal phalanx at full digital extension was 0.2 mm in the 20% group, 0.8 mm in the 40% group, 3.2 mm in the 60% group, and 3.1 mm in the 80% group. Simulated volar articular bony defects of 20% were stable, whereas those with 60% and 80% defects were unstable during digital motion. Stability in the 40% group was variable and appeared to be the threshold for stability. Knowledge of the typical amount of middle phalanx defect and degree of proximal interphalangeal joint extension that can lead to joint instability may improve management of mechanically important proximal interphalangeal joint fracture dislocations. Copyright © 2014 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

  19. [Angle-stable intramedullary nailing of proximal humerus fractures with the PHN (proximal humeral nail)].

    Science.gov (United States)

    Blum, Jochen; Hansen, Matthias; Rommens, Pol Maria

    2009-09-01

    Stable fixation of two- and three-part fractures of the proximal humerus through minimally invasive operative technique and rapid bone healing as well as restoration of original anatomy. Early functional training with the goal of restoration of former mobility and daily activities. Unstabile two- and three-part fractures of the proximal humerus (AO classification: 11-A2, 11-A3, 11-B1, 11-B2, 11-B3). Subcapital nonunion of the humerus. Pathologic fractures. Pediatric fractures of the proximal humerus. Fractures of the proximal humerus types 11-C2 und 11-C3 according to the AO classification. Active local infection, e.g., after former operation. Closed reduction. Anterior acromial incision, splitting of the deltoid muscle and the rotator cuff. Opening of the medullary canal with the awl. Nail introduction. Spiral blade introduction in cannulated technique through stab incision. Distal interlocking through aiming device, angle-stable blocking of nail and blade through end cap. Postoperative fixation in Gilchrist sling until 2nd postoperative day; then physiotherapy respecting fracture type and stability, local swelling, patient's age and compliance, and concomitant injuries. 151 proximal humeral fractures were treated with a proximal humeral nail (PHN). 108 patients could be followed up 1 year postoperatively. Significant complications were perforation of the articular surface through bolts or blades (n = 8), implant-related pain (n = 10), fragment dislocation (n = 2), nonunion (n = 2), humeral head necrosis (n = 3), and superficial infection (n = 1). 1 year after the operation, the Constant-Murley Score showed a median value of 75.3 in the injured shoulder and of 89.9 in the uninjured shoulder. The DASH (Disability of the Arm, Shoulder and Hand) Score was 5.9 preoperatively and 9.3 at 1 year postoperatively. The worst results regarding the Constant-Murley Score as well as the DASH Score were found in C-type fractures.

  20. Impacted valgus fractures of the proximal humerus

    Directory of Open Access Journals (Sweden)

    Fabiano Rebouças Ribeiro

    2016-04-01

    Full Text Available Impacted valgus fractures of the proximal humerus are considered to be a special type fracture, since impaction of the humeral head on the metaphysis with maintenance of the posteromedial periosteum improves the prognosis regarding occurrences of avascular necrosis. This characteristic can also facilitate the reduction maneuver and increase the consolidation rate of these fractures, even in more complex cases. The studies included were obtained by searching the Bireme, Medline, PubMed, Cochrane Library and Google Scholar databases for those published between 1991 and 2013. The objective of this study was to identify the most common definitions, classifications and treatment methods used for these fractures in the orthopedic medical literature.

  1. Management of posttraumatic proximal interphalangeal joint contracture.

    Science.gov (United States)

    Houshian, Shirzad; Jing, Shan Shan; Chikkamuniyappa, Chandrasekar; Kazemian, Gholam Hussein; Emami-Moghaddam-Tehrani, Mohammad

    2013-08-01

    Chronic flexion contracture of the proximal interphalangeal (PIP) joint presents a common yet challenging problem to hand surgeons. Over the years, multiple treatment modalities have been described for this problem, producing limited results. Nonoperative treatment using serial casting and splints should be tried before attempting open surgical release, which should be done in selected patients. The use of external fixation for treating PIP contracture has been encouraging and can be a useful alterative. This review provides an update on the current management of PIP joint contractures and presents a flowchart of treatment to aid decision making. Copyright © 2013 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

  2. Proximal iliotibial band syndrome: case report

    Directory of Open Access Journals (Sweden)

    Guilherme Guadagnini Falotico

    2013-08-01

    Full Text Available OBJECTIVE: The overuse injuries in the hip joint occur commonly in sports practitioners and currently due to technical advances in diagnostic imaging, especially magnetic resonance imaging (MRI, are often misdiagnosed. Recently, a group of people were reported, all female, with pain and swelling in the pelvic region.T2-weighted MRI showed increased signal in the enthesis of the iliotibial band (ITB along the lower border of the iliac tubercle. We report a case of a 34 year old woman, non-professional runner, with pain at the iliac crest with no history of trauma and whose MRI was compatible with the proximal iliotibial band syndrome.

  3. Ontogeny of rabbit proximal tubule urea permeability

    Science.gov (United States)

    QUIGLEY, RAYMOND; LISEC, AMBER; BAUM, MICHEL

    2014-01-01

    Urea transport in the proximal tubule is passive and is dependent on the epithelial permeability. The present study examined the maturation of urea permeability (Purea) in in vitro perfused proximal convoluted tubules (PCT) and basolateral membrane vesicles (BLMV) from rabbit renal cortex. Urea transport was lower in neonatal than adult PCT at both 37 and 25°C. The PCT Purea was also lower in the neonates than the adults (37°C: 45.4 ± 10.8 vs. 88.5 ± 15.2 × 10−6 cm/s, P 0.05). The activation energy for PCT Purea was not different between the neonatal and adult groups. BLMV Purea was determined by measuring vesicle shrinkage, due to efflux of urea, using a stop-flow instrument. Neonatal BLMV Purea was not different from adult BLMV Purea at 37°C [1.14 ± 0.05 × 10−6 vs. 1.25 ± 0.05 × 10−6 cm/s; P = not significant (NS)] or 25°C (0.94 ± 0.06 vs. 1.05 ± 0.10 × 10−6 cm/s; P = NS). There was no effect of 250 μM phloretin, an inhibitor of the urea transporter, on Purea in either adult or neonatal BLMV. The activation energy for urea diffusion was also identical in the neonatal and adult BLMV. These findings in the BLMV are in contrast to the brush-border membrane vesicles (BBMV) where we have previously demonstrated that urea transport is lower in the neonate than the adult. Urea transport is lower in the neonatal proximal tubule than the adult. This is due to a lower rate of apical membrane urea transport, whereas basolateral urea transport is the same in neonates and adults. The lower Purea in neonatal proximal tubules may play a role in overall urea excretion and in developing and maintaining a high medullary urea concentration and thus in the ability to concentrate the urine during renal maturation. PMID:11353675

  4. Congenital anomalies and proximity to landfill sites.

    LENUS (Irish Health Repository)

    Boyle, E

    2004-01-01

    The occurrence of congenital anomalies in proximity to municipal landfill sites in the Eastern Region (counties Dublin, Kildare, Wicklow) was examined by small area (district electoral division), distance and clustering tendancies in relation to 83 landfills, five of which were major sites. The study included 2136 cases of congenital anomaly, 37,487 births and 1423 controls between 1986 and 1990. For the more populous areas of the region 50% of the population lived within 2-3 km of a landfill and within 4-5 km for more rural areas. In the area-level analysis, the standardised prevalence ratios, empirical and full Bayesian modelling, and Kulldorff\\'s spatial scan statistic found no association between the residential area of cases and location of landfills. In the case control analysis, the mean distance of cases and controls from the nearest landfill was similar. The odds ratios of cases compared to controls for increasing distances from all landfills and major landfills showed no significant difference from the baseline value of 1. The kernel and K methods showed no tendency of cases to cluster in relationship to landfills. In conclusion, congenital anomalies were not found to occur more commonly in proximity to municipal landfills.

  5. Scattering Effects in Proximity Effect Tunneling Spectroscopy.

    Science.gov (United States)

    Gai, Wei

    PETS (Proximity Effect Tunneling Spectroscopy) technique has been applied to Niobium/Yttrium and Niobium/Lutetium bilayers. We have determined electron - phonon interaction parameter lambda_{rm e -ph} is 0.55 for Yttrium and 0.67 for Lutetium. Spin fluctuations parameter lambda_{ rm S} is 0.20 for Yttrium and 0.33 for Lutetium. We found that the large spin fluctuations in Yttrium and Lutetium has responsibility to the absence of superconductivity in them. Our results have given a reasonable explanation of high superconducting transition temperature in them under high pressure. The large reflection coefficient and strong diffuse scattering at Nb/Y and Nb/Lu interface has been discovered and it should have strong influence on the transport properties of metallic superlattices. From the modeling study of elastic scattering in proximity effect tunnel junctions, we have explained why some conventional made high {rm T_{C}} superconducting tunnel junctions give ideal like characteristics in the gap region but variable strength phonon structures in the phonon region.

  6. Proteomics of Primary Cilia by Proximity Labeling.

    Science.gov (United States)

    Mick, David U; Rodrigues, Rachel B; Leib, Ryan D; Adams, Christopher M; Chien, Allis S; Gygi, Steven P; Nachury, Maxence V

    2015-11-23

    While cilia are recognized as important signaling organelles, the extent of ciliary functions remains unknown because of difficulties in cataloguing proteins from mammalian primary cilia. We present a method that readily captures rapid snapshots of the ciliary proteome by selectively biotinylating ciliary proteins using a cilia-targeted proximity labeling enzyme (cilia-APEX). Besides identifying known ciliary proteins, cilia-APEX uncovered several ciliary signaling molecules. The kinases PKA, AMPK, and LKB1 were validated as bona fide ciliary proteins and PKA was found to regulate Hedgehog signaling in primary cilia. Furthermore, proteomics profiling of Ift27/Bbs19 mutant cilia correctly detected BBSome accumulation inside Ift27(-/-) cilia and revealed that β-arrestin 2 and the viral receptor CAR are candidate cargoes of the BBSome. This work demonstrates that proximity labeling can be applied to proteomics of non-membrane-enclosed organelles and suggests that proteomics profiling of cilia will enable a rapid and powerful characterization of ciliopathies. Copyright © 2015 Elsevier Inc. All rights reserved.

  7. Proximal femoral osteotomy in cerebral palsy.

    Science.gov (United States)

    Tylkowski, C M; Rosenthal, R K; Simon, S R

    1980-09-01

    The purpose of this study was to examine the results of the proximal femoral osteotomy for the management of hip deformity in 32 children, aged 4 to 15 years. Twenty-two bilateral and ten unilateral procedures were performed. The indications for surgery were subluxation in 16, dislocation in two, and intoeing and femoral anteversion in 14. The average follow-up was two years and 11 months. CE angle of Wiberg, acetabular index and neck shaft angle were evaluated. The average time to regain preoperative ambulatory status was six months with intensive physical therapy. In osteotomies performed for subluxation, dislocation did not occur; roentgenographic indices showed variability in the degree of subluxation. Osteotomy performed in children older than 8 years of age produced no evidence of acetabular remodeling. THere was no recurrence with osteotomies for dislocation. In those patients with internal rotation gait, improvement resulted. Complications were few and minor. Hip dislocation in children with progressive subluxation, in spite of previous soft-tissue releases, is preventable by proximal femoral osteotomy. The inability of the roentgenographic indices to quantitate the increased stability indicates the procedure's major effect is to realign muscle forces about the hip. Treatment of the intoeing gait produced improvement of rotational deformity.

  8. Obesity and supermarket access: proximity or price?

    Science.gov (United States)

    Drewnowski, Adam; Aggarwal, Anju; Hurvitz, Philip M; Monsivais, Pablo; Moudon, Anne V

    2012-08-01

    We examined whether physical proximity to supermarkets or supermarket price was more strongly associated with obesity risk. The Seattle Obesity Study (SOS) collected and geocoded data on home addresses and food shopping destinations for a representative sample of adult residents of King County, Washington. Supermarkets were stratified into 3 price levels based on average cost of the market basket. Sociodemographic and health data were obtained from a telephone survey. Modified Poisson regression was used to test the associations between obesity and supermarket variables. Only 1 in 7 respondents reported shopping at the nearest supermarket. The risk of obesity was not associated with street network distances between home and the nearest supermarket or the supermarket that SOS participants reported as their primary food source. The type of supermarket, by price, was found to be inversely and significantly associated with obesity rates, even after adjusting for individual-level sociodemographic and lifestyle variables, and proximity measures (adjusted relative risk=0.34; 95% confidence interval=0.19, 0.63) Improving physical access to supermarkets may be one strategy to deal with the obesity epidemic; improving economic access to healthy foods is another.

  9. Demonstration of automated proximity and docking technology

    Science.gov (United States)

    Anderson, Robert L.; Tsugawa, Roy K.; Bryan, Thomas C.

    1991-01-01

    Automated spacecraft docking operations are being performed using a full scale motion based simulator and an optical sensor. This presentation will discuss the work in progress at TRW and MSFC facilities to study the problem of automated proximity and docking operations. The docking sensor used in the MSFC Optical Sensor and simulation runs are performed using the MSFC Flat Floor Facility. The control algorithms and six degrees of freedom (6DOF) simulation software were developed at TRW and integrated into the MSFC facility. Key issues being studied are the quantification of docking sensor requirements and operational constraints necessary to perform automated docking maneuvers, control algorithms capable of performing automated docking in the presence of sensitive and noisy sensor data, and sensor technologies for automated proximity and docking operations. As part of this study the MSFC sensor characteristics were analyzed and modeled so that off line simulation runs can be performed for control algorithm testing. Our goal is to develop and demonstrate full 6DOF docking capabilities with actual sensors on the MSFC motion based simulator. We present findings from actual docking simulation runs which show sensor and control loop performance as well as problem areas which require close attention. The evolution of various control algorithms using both phase plane and Clohessy-Wiltshire techniques are discussed. In addition, 6DOF target acquisition and control strategies are described.

  10. Pathological fractures of the proximal humerus treated with a proximal humeral locking plate and bone cement.

    Science.gov (United States)

    Siegel, H J; Lopez-Ben, R; Mann, J P; Ponce, B A

    2010-05-01

    Bone loss secondary to primary or metastatic lesions of the proximal humerus remains a challenging surgical problem. Options include preservation of the joint with stabilisation using internal fixation or resection of the tumour with prosthetic replacement. Resection of the proximal humerus often includes the greater tuberosity and adjacent diaphysis, which may result in poor function secondary to loss of the rotator cuff and/or deltoid function. Preservation of the joint with internal fixation may reduce the time in hospital and peri-operative morbidity compared with joint replacement, and result in a better functional outcome. We included 32 patients with pathological fractures of the proximal humerus in this study. Functional and radiological assessments were performed. At a mean follow-up of 17.6 months (8 to 61) there was no radiological evidence of failure of fixation. The mean revised musculoskeletal Tumour Society functional score was 94.6% (86% to 99%). There was recurrent tumour requiring further surgery in four patients (12.5%). Of the 22 patients who were employed prior to presentation all returned to work without restrictions. The use of a locking plate combined with augmentation with cement extends the indications for salvage of the proximal humerus with good function in patients with pathological and impending pathological fractures.

  11. Digital camera resolution and proximal caries detection.

    Science.gov (United States)

    Prapayasatok, S; Janhom, A; Verochana, K; Pramojanee, S

    2006-07-01

    To evaluate the diagnostic accuracy of proximal caries detection from digitized film images captured by a digital camera at different resolution settings. Twenty-five periapical radiographs of 50 premolar and 25 molar teeth were photographed using a digital camera, Sony Cyber-shot, DSC-S75 at three different resolution settings: 640 x 480, 1280 x 960 and 1600 x 1200. Seventy-five digital images were transferred to a computer, saved and opened using ACDSee software. In addition, a PowerPoint slide was made from each digital image. Five observers scored three groups of images (the films, the displayed 1:1 digital images on the ACDSee software, and the PowerPoint slides) for the existence of proximal caries using a 5-point confidence scale, and the depth of caries on a 4-point scale. Ground sections of the teeth were used as the gold standard. Az values under the receiver operating characteristic (ROC) curve of each group of images and at different resolutions were compared using the Friedman and Wilcoxon signed rank tests. Mean different values between the lesions' depth interpreted by the observers and that of the gold standard were analysed. Films showed the highest Az values. Only the 1280 x 960 images on the ACDSee software showed no significant difference of the Az value from the films (P=0.28). The digital images from three resolution settings on the PowerPoint slides showed no significant differences, either among each other or between them and the films. For caries depth, the 1280 x 960 images showed lower values of mean difference in enamel lesions compared with the other two resolution groups. This study showed that in order to digitize conventional films, it was not necessary to use the highest camera resolution setting to achieve high diagnostic accuracy for proximal caries detection. The 1280 x 960 resolution setting of the digital camera demonstrated comparable diagnostic accuracy with film and was adequate for digitizing radiographs for caries

  12. The non-operative resin treatment of proximal caries lesions.

    Science.gov (United States)

    Ekstrand, Kim; Martignon, Stefania; Bakhshandeh, Azam; Ricketts, David N J

    2012-11-01

    Epidemiological data show that the prevalence of caries on proximal surfaces in need of operative treatment is very high around the world, both in the primary and the permanent dentition. This article presents two new treatment methods: proximal sealing and proximal infiltration. The indications are progressing proximal caries lesions, radiographically with a depth around the enamel-dentine junction. A small number of studies regarding the effect of sealing and infiltration on proximal caries versus the use of fluoride varnish, placebo treatment and flossing instructions have been carried out. About half of the studies disclose a not significant difference between test and control treatment. In the other half, the therapeutic effect is significant and corresponds to about 30% reduction in lesion progression. However, longitudinal studies of longer duration are lacking. Proximal sealing and proximal infiltration may have a place in the treatment of non-cavitated proximal lesions. Proximal caries is a problem in both primary and permanent dentitions. Proximal sealants or lesion infiltration are possible treatments.

  13. Preoperative assessment of the cancellous bone mineral density of the proximal humerus using CT data

    Energy Technology Data Exchange (ETDEWEB)

    Krappinger, Dietmar; Roth, Tobias; Gschwentner, Martin; Suckert, Armin; Blauth, Michael; Hengg, Clemens; Kralinger, Franz [Innsbruck Medical University, Department of Trauma Surgery and Sports Medicine, Innsbruck (Austria)

    2012-03-15

    Osteoporotic fractures of the proximal humerus show an increasing incidence. Osteoporosis not only influences the fracture risk after low-energy trauma, but also affects the mechanical stability of internal fixation. Preoperative assessment of the local bone quality may be useful in the surgical treatment of patients sustaining these injuries. The aim of the present study was to present a method for the preoperative assessment of the local cancellous bone mineral density (BMD) of the proximal humerus using CT data. In the first part of the study, CT scans of 30 patients with unilateral fractures of the proximal humerus after low-energy trauma were used. The local BMD was assessed on the contralateral uninjured side. All 30 patients additionally underwent dual-emission X-ray absorptiometry (DXA) of the lumbar spine, proximal femur, and forearm of the side of the uninjured proximal humerus within 6 weeks after trauma. Three independent trauma surgeons performed measurements on the uninjured proximal humerus twice with a time interval of 4 weeks in order to assess the inter- and intraobserver reliability of the method. In the second part of the study, the local BMD of 507 patients with either proximal humerus fractures or chronic shoulder instability was assessed by a single trauma surgeon. In both parts, the average HU values in standardized ROIs of the humeral head were automatically calculated after correcting for HU values below the water equivalent. A linear calibration equation was computed for the calculation from HU to BMD using a calibration device (EFP). The intra- and interobserver reliability was high (ICC > 0.95). Correlation coefficients between the local BMD of the proximal humerus and other anatomical sites were between 0.35 (lumbar spine) and 0.64 (forearm). We found a high correlation between the local BMD and age. The BMD in the fracture group was significantly lower than in the instability group. These patients were significantly older and more

  14. Rehabilitation and Prevention of Proximal Hamstring Tendinopathy.

    Science.gov (United States)

    Beatty, Nicholas R; Félix, Ioonna; Hettler, Jessica; Moley, Peter J; Wyss, James F

    Proximal hamstring tendinopathy (PHT) comprises a small but significant portion of hamstring injuries in athletes, especially runners. PHT is a chronic condition that is clinically diagnosed but can be supported with imaging. The main presenting complaint is pain in the lower gluteal or ischial region that may or may not radiate along the hamstrings in the posterior thigh. There is little scientific evidence on which to base the rehabilitation management of PHT. Treatment is almost always conservative, with a focus on activity modification, addressing contributing biomechanical deficiencies, effective tendon loading including eccentric training, and ultrasound-guided interventional procedures which may facilitate rehabilitation. Surgery is limited to recalcitrant cases or those involving concomitant high-grade musculotendinous pathology. The keys to PHT management include early and accurate diagnosis, optimal rehabilitation to allow for a safe return to preinjury activity level, and preventative strategies to reduce risk of reinjury.

  15. DC Proximal Newton for Nonconvex Optimization Problems.

    Science.gov (United States)

    Rakotomamonjy, Alain; Flamary, Rémi; Gasso, Gilles

    2016-03-01

    We introduce a novel algorithm for solving learning problems where both the loss function and the regularizer are nonconvex but belong to the class of difference of convex (DC) functions. Our contribution is a new general purpose proximal Newton algorithm that is able to deal with such a situation. The algorithm consists in obtaining a descent direction from an approximation of the loss function and then in performing a line search to ensure a sufficient descent. A theoretical analysis is provided showing that the iterates of the proposed algorithm admit as limit points stationary points of the DC objective function. Numerical experiments show that our approach is more efficient than the current state of the art for a problem with a convex loss function and a nonconvex regularizer. We have also illustrated the benefit of our algorithm in high-dimensional transductive learning problem where both the loss function and regularizers are nonconvex.

  16. Proximity Effects in Superconductor-Graphene Junctions

    Science.gov (United States)

    Cuellar, Fabian A.; Perconte, David; Martin, Marie-Blandine; Dlubak, Bruno; Piquemail, Maelis; Bernard, Rozenn; Trastoy, Juan; Moreau-Luchaire, Constance; Seneor, Pierre; Villegas, Javier E.; Kidambi, Piran; Hofmann, Stephan; Robertson, John

    2015-03-01

    Superconducting proximity effects are of particular interest in graphene: because of its band structure, an unconventional (specular) Andreev reflection is expected. In this context, high-Tc superconductor-graphene junctions are especially attractive. In these, the size of the superconducting energy-gap may exceed the graphene doping inhomogeneities around the Dirac point, which should favor the observation of the specular Andreev reflection. Yet, the fabrication of high-Tc superconductor-graphene junctions is challenging: the usual growth and lithography processes in both materials are incompatible. We report here on a fabrication method that allow us to fabricate planar cuprate superconductor-graphene junctions, which we characterize via conductance spectroscopy. We analyze the features in the conductance spectra as a function of graphene doping, and discuss them in the framework of the Andreev reflection. Work supported by Labex Nanosaclay.

  17. Phonon engineering in proximity enhanced superconductor heterostructures.

    Science.gov (United States)

    Tang, Yong-Chao; Kwon, Sangil; Mohebbi, Hamid R; Cory, David G; Miao, Guo-Xing

    2017-06-27

    In this research, we tailor the phonon density of states (DOS) in thin superconducting films to suppress quasiparticle losses. We examine a model system of a proximity-enhanced three-layered Al/Nb/Al heterostructure and show that the local quantized phonon spectrum of the ultrathin Al cladding layers in the heterostructure has a pronounced effect on the superconducting resonator's quality factors. Instead of a monotonic increase of quality factors with decreasing temperatures, we observe the quality factor reaches a maximum at 1.2 K in 5/50/5 nm Al/Nb/Al microstrip resonators, because of a quantized phonon ladder. The phonon DOS may be engineered to enhance the performance of quantum devices.

  18. Mouse model of proximal tubule endocytic dysfunction.

    Science.gov (United States)

    Weyer, Kathrin; Storm, Tina; Shan, Jingdong; Vainio, Seppo; Kozyraki, Renata; Verroust, Pierre J; Christensen, Erik I; Nielsen, Rikke

    2011-11-01

    Several studies have indicated the central role of the megalin/cubilin multiligand endocytic receptor complex in protein reabsorption in the kidney proximal tubule. However, the poor viability of the existing megalin-deficient mice precludes further studies and comparison of homogeneous groups of mice. Megalin- and/or cubilin-deficient mice were generated using a conditional Cre-loxP system, where the Cre gene is driven by the Wnt4 promoter. Kidney tissues from the mice were analysed for megalin and cubilin expression by quantitative reverse transcription-polymerase chain reaction, western blotting and immunohistochemistry. Renal albumin uptake was visualized by immunohistochemistry. Twenty-four-hour urine samples were collected in metabolic cages and analysed by sodium dodecyl sulphate-polyacrylamide gel electrophoresis and western blotting. Urinary albumin/creatinine ratios were measured by ELISA and the alkaline picrate method. The Meg(lox/lox);Cre(+), Cubn(lox/lox);Cre(+) and Meg(lox/lox), Cubn(lox/lox);Cre(+) mice were all viable, fertile and developed normal kidneys. Megalin and/or cubilin expression, assessed by immunohistology and western blotting, was reduced by >89%. Consistent with this observation, the mice excreted megalin and cubilin ligands such as transferrin and albumin in addition to low-molecular weight proteins. We further show that megalin/cubilin double-deficient mice excrete albumin with an average of 1.45 ± 0.54 mg/day, suggesting a very low albumin concentration in the glomerular ultrafiltrate. We report here the efficient genetic ablation of megalin, cubilin or both, using a Cre transgene driven by the Wnt4 promoter. The viable megalin/cubilin double-deficient mice now allow for detailed large-scale group analysis, and we anticipate that the mice will be of great value as an animal model for proximal tubulopathies with disrupted endocytosis.

  19. Proximal and distal muscle fatigue differentially affect movement coordination.

    Science.gov (United States)

    Cowley, Jeffrey C; Gates, Deanna H

    2017-01-01

    Muscle fatigue can cause people to change their movement patterns and these changes could contribute to acute or overuse injuries. However, these effects depend on which muscles are fatigued. The purpose of this study was to determine the differential effects of proximal and distal upper extremity muscle fatigue on repetitive movements. Fourteen subjects completed a repetitive ratcheting task before and after a fatigue protocol on separate days. The fatigue protocol either fatigued the proximal (shoulder flexor) or distal (finger flexor) muscles. Pre/Post changes in trunk, shoulder, elbow, and wrist kinematics were compared to determine how proximal and distal fatigue affected multi-joint movement patterns and variability. Proximal fatigue caused a significant increase (7°, p fatigue caused small but significant changes in trunk angles (2°, p fatigue protocols (p fatigue at either proximal or distal joints. The identified differences between proximal and distal muscle fatigue adaptations could facilitate risk assessment of occupational tasks.

  20. Proximal and distal muscle fatigue differentially affect movement coordination

    Science.gov (United States)

    Cowley, Jeffrey C.

    2017-01-01

    Muscle fatigue can cause people to change their movement patterns and these changes could contribute to acute or overuse injuries. However, these effects depend on which muscles are fatigued. The purpose of this study was to determine the differential effects of proximal and distal upper extremity muscle fatigue on repetitive movements. Fourteen subjects completed a repetitive ratcheting task before and after a fatigue protocol on separate days. The fatigue protocol either fatigued the proximal (shoulder flexor) or distal (finger flexor) muscles. Pre/Post changes in trunk, shoulder, elbow, and wrist kinematics were compared to determine how proximal and distal fatigue affected multi-joint movement patterns and variability. Proximal fatigue caused a significant increase (7°, p fatigue caused small but significant changes in trunk angles (2°, p fatigue protocols (p fatigue at either proximal or distal joints. The identified differences between proximal and distal muscle fatigue adaptations could facilitate risk assessment of occupational tasks. PMID:28235005

  1. Spatial Proximity and Intercompany Communication: Myths and Realities

    OpenAIRE

    Aguilera, Anne; Lethiais, Virginie; Alain RALLET

    2015-01-01

    Spatial proximity is credited with numerous virtues in the economic literature. In particular, for a company to be located near other companies is seen as conducive to the development of business relations. Spatial proximity is also considered to contribute to the quality and efficiency of these relations by facilitating face-to-face meetings that foster the exchange of complex knowledge and, in particular, the emergence of innovation. This article explores the notion of spatial proximity in ...

  2. Diagnosis of Proximal Caries in Primary Molars with DIAGNOdent pen

    OpenAIRE

    Ermler, Romy

    2010-01-01

    Proximal surfaces, together with fissures, are the areas where most primary caries occur. Due to the anatomy of the deciduous molars, proximal caries cannot be detected at an early stage in crowded teeth by simply using a mirror and probe. Therefore, additional methods to find early proximal caries have to be used. KaVo uses laser fluorescence to detect caries. Originally, the DIAGNOdent devices were able to detect only occlusal caries (56, 61, 62, 65, 66). New results are now also available ...

  3. Inexact proximal Newton methods for self-concordant functions

    DEFF Research Database (Denmark)

    Li, Jinchao; Andersen, Martin Skovgaard; Vandenberghe, Lieven

    2016-01-01

    with an application to L1-regularized covariance selection, in which prior constraints on the sparsity pattern of the inverse covariance matrix are imposed. In the numerical experiments the proximal Newton steps are computed by an accelerated proximal gradient method, and multifrontal algorithms for positive definite......We analyze the proximal Newton method for minimizing a sum of a self-concordant function and a convex function with an inexpensive proximal operator. We present new results on the global and local convergence of the method when inexact search directions are used. The method is illustrated...

  4. Getter materials for cracking ammonia

    Energy Technology Data Exchange (ETDEWEB)

    Boffito, Claudio; Baker, John D.

    1999-11-02

    A method is provided for cracking ammonia to produce hydrogen. The method includes the steps of passing ammonia over an ammonia-cracking catalyst which is an alloy including (1) alloys having the general formula Zr.sub.1-x Ti.sub.x M.sub.1 M.sub.2, wherein M.sub.1 and M.sub.2 are selected independently from the group consisting of Cr, Mn, Fe, Co, and Ni, and x is between about 0.0 and about 1.0 inclusive; and between about 20% and about 50% Al by weight. In another aspect, the method of the invention is used to provide methods for operating hydrogen-fueled internal combustion engines and hydrogen fuel cells. In still another aspect, the present invention provides a hydrogen-fueled internal combustion engine and a hydrogen fuel cell including the above-described ammonia-cracking catalyst.

  5. Tips for Beginners: Attention Getters.

    Science.gov (United States)

    Moldavan, Carla

    1993-01-01

    Proposes the use of humor and the personalization of word problems by inserting students' names in the problem statement as methods of gaining students' attention. Illustrates their use in a mixture problem and the Tower of Hanoi problem. (MDH)

  6. A Real Attention-Getter

    Science.gov (United States)

    2003-01-01

    While most parents would agree that playing videos games is the antithesis of time well spent for their children, recent advances involving NASA biofeedback technology are proving otherwise. The same techniques used to measure brain activity in NASA pilots during flight simulation exercises are now a part of a revolutionary video game system that is helping to improve overall mental awareness for Americans of all ages, including those who suffer from Attention Deficit Hyperactivity Disorder (ADHD).

  7. Effect of acute hypertension on sodium reabsorption by the proximal tubule.

    Science.gov (United States)

    Koch, K M; Aynedjian, H S; Bank, N

    1968-07-01

    The effect of acute hypertension on sodium reabsorption by the proximal tubule was studied in rats by means of micropuncture methods. Hypertension was induced by bilateral carotid artery ligation and cervical vagotomy. Within a few minutes after blood pressure rose (30-60 mm Hg above control levels), a moderate natriuresis and diuresis began. Proximal sodium reabsorption, measured by two independent methods, was found to be markedly suppressed, both in absolute amount per unit length and per unit of tubular volume (C/pir(2)). The ratio between tubular volume and glomerular filtration rate (GFR) (pir(2)d/V(0)) was found to be increased. These observations indicate that the inhibition of proximal sodium reabsorption induced by hypertension cannot be explained by the tubular geometry hypothesis of sodium regulation. Several possible hormonal mechanisms were investigated. Intravenous d-aldosterone did not prevent the suppression of sodium transport due to acute hypertension, nor did chronic oral saline loading to reduce the renal content of renin. Constriction of the suprarenal aorta, with maintenance of a normal renal perfusion pressure, did prevent the inhibition of proximal transport during carotid artery occlusion, thus excluding an extrarenally produced natriuretic hormone as the mechanism. The observations are compatible with the view that sodium transport was inhibited either by an intrarenal natriuretic hormone or by an increase in the interstitial volume of the kidney produced by a transient hydrostatic pressure gradient across the peritubular capillaries. The latter seems more likely to us because of the rapidity of onset of the natriuresis, and because removing the renal capsule and releasing the surface interstitial fluid prevented the effect of hypertension on proximal sodium transport.

  8. Imaging of rectus femoris proximal tendinopathies

    Energy Technology Data Exchange (ETDEWEB)

    Pesquer, Lionel; Poussange, Nicolas; Meyer, Philippe; Dallaudiere, Benjamin; Feldis, Matthieu [Clinique du Sport de Bordeaux, Centre d' Imagerie Osteo-articulaire, Merignac (France); Sonnery-Cottet, Bertrand [Groupe Ramsay Generale de Sante - Hopital Prive Jean Mermoz, Centre Orthopedique Santy, Lyon (France); Graveleau, Nicolas [Clinique du Sport de Bordeaux, Centre de Chirurgie Orthopedique et Sportive, Merignac (France)

    2016-07-15

    The rectus femoris is the most commonly injured muscle of the anterior thigh among athletes, especially soccer players. Although the injury pattern of the muscle belly is well documented, less is known about the anatomy and specific lesions of the proximal tendons. For each head, three distinctive patterns may be encountered according to the location of the injury, which can be at the enthesis, within the tendon, or at the musculotendinous junction. In children, injuries correspond most commonly to avulsion of the anteroinferior iliac spine from the direct head and can lead to subspine impingement. Calcific tendinitis and traumatic tears may be encountered in adults. Recent studies have shown that traumatic injuries of the indirect head may be underdiagnosed and that injuries of both heads may have a surgical issue. Finally, in the case of tears, functional outcome and treatment may vary if the rupture involves one or both tendons and if the tear is partial or complete. Thus, it is mandatory for the radiologist to know the different ultrasound and magnetic resonance imaging (MRI) patterns of these lesions in order to provide accurate diagnosis and treatment. The purpose of this article is to recall the anatomy of the two heads of rectus femoris, describe a reliable method of assessment with ultrasound and MRI and know the main injury patterns, through our own experience and literature review. (orig.)

  9. Proximate industrial activity and psychological distress

    Science.gov (United States)

    Downey, Liam; Jackson, James S.; Merrill, J. Bryce; Saint Onge, Jarron M.; Williams, David R.

    2009-01-01

    This paper examines the role that gender, occupational status, and family status play in moderating the effect of industrial activity on the psychological well-being of nearby residents. Using a unique spatial assessment of industrial activity and an environmental risk/social stressor framework in conjunction with individual-level data from the Detroit Area Study (DAS) and demographic data from the U.S. census, we find that residents of neighborhoods in close proximity to industrial activity report elevated levels of psychological distress compared to residents of neighborhoods removed from this type of activity. These influences are more pronounced among women but gender differences are also contingent upon occupational and family statuses. We show that specific combinations of work and family statuses make persons particularly vulnerable to the influence of this environmental stressor and women are two and a half times more likely than men to have these vulnerable statuses. This study makes an important contribution to the environmental health literature because it reminds researchers of the fundamental influence of social roles when examining the link between environmental risks and mental health. PMID:19444334

  10. [Ophthalmologists in the proximity of Adolf Hitler].

    Science.gov (United States)

    Rohrbach, J M

    2012-10-01

    Adolf Hitler met or at least knew about 5 ophthalmologists. The chair of ophthalmology in Berlin, Walther Löhlein, personally examined Hitler's eyes at least two times. The chair of ophthalmology in Breslau, Walter Dieter, developed "air raid protection spectacles" with the aid of high representatives of the NS-system and probably Adolf Hitler himself. Heinrich Wilhelm Kranz became rector of the universities of Giessen and Frankfurt/Main. He was known as a very strict advocate of the NS-race hygiene. Werner Zabel made plans for Hitler's diet and tried to interfere with Hitler's medical treatment. Finally, Hellmuth Unger was an influential representative of the medical press and a famous writer. Three of his novels with medical topics were made into a film which Hitler probably saw. Hitler had, so to say, a small "ophthalmological proximity" which, however, did not play a significant role for himself or the NS-state. © Georg Thieme Verlag KG Stuttgart · New York.

  11. Semiconductor detectors with proximity signal readout

    Energy Technology Data Exchange (ETDEWEB)

    Asztalos, Stephen J. [XIA, LLC, Hayward, CA (United States)

    2014-01-30

    Semiconductor-based radiation detectors are routinely used for the detection, imaging, and spectroscopy of x-rays, gamma rays, and charged particles for applications in the areas of nuclear and medical physics, astrophysics, environmental remediation, nuclear nonproliferation, and homeland security. Detectors used for imaging and particle tracking are more complex in that they typically must also measure the location of the radiation interaction in addition to the deposited energy. In such detectors, the position measurement is often achieved by dividing or segmenting the electrodes into many strips or pixels and then reading out the signals from all of the electrode segments. Fine electrode segmentation is problematic for many of the standard semiconductor detector technologies. Clearly there is a need for a semiconductor-based radiation detector technology that can achieve fine position resolution while maintaining the excellent energy resolution intrinsic to semiconductor detectors, can be fabricated through simple processes, does not require complex electrical interconnections to the detector, and can reduce the number of required channels of readout electronics. Proximity electrode signal readout (PESR), in which the electrodes are not in physical contact with the detector surface, satisfies this need.

  12. Altruism by age and social proximity.

    Science.gov (United States)

    Long, Mark C; Krause, Eleanor

    2017-01-01

    This study evaluates the extent to which an individual's stated altruistic sentiments can be influenced by context-most importantly, by the age and social proximity of the other person and by the nature of what is being sacrificed. We measure willingness to sacrifice own health for another person's health and willingness to sacrifice own wealth for another person's wealth. To evaluate these sentiments, two surveys were administered to representative samples of Americans which contained hypothetical scenarios with context randomly assigned; the first survey posed a dictator game question and the second survey was designed to elicit marginal rates of substitution between own and other's health/wealth. As expected, we find less altruism towards those who are more socially distant (e.g., strangers relative to family). We find individuals are more health altruistic towards young children and more wealth altruistic towards adults, and health altruism tends to be lowest for survey respondents near retirement age. We find no relationship between levels of altruism and the distance between the respondent's state of birth and state of current residence. These findings improve society's understanding of situational altruism and kinship and reciprocity as motivations for altruism, and they have practical implications concerning the economic valuation of human lives used to guide public policy-making.

  13. Proximal spinal muscular atrophy: current orthopedic perspective

    Directory of Open Access Journals (Sweden)

    Haaker G

    2013-11-01

    Full Text Available Gerrit Haaker, Albert Fujak Department of Orthopaedic Surgery, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen, Germany Abstract: Spinal muscular atrophy (SMA is a hereditary neuromuscular disease of lower motor neurons that is caused by a defective "survival motor neuron" (SMN protein that is mainly associated with proximal progressive muscle weakness and atrophy. Although SMA involves a wide range of disease severity and a high mortality and morbidity rate, recent advances in multidisciplinary supportive care have enhanced quality of life and life expectancy. Active research for possible treatment options has become possible since the disease-causing gene defect was identified in 1995. Nevertheless, a causal therapy is not available at present, and therapeutic management of SMA remains challenging; the prolonged survival is increasing, especially orthopedic, respiratory and nutritive problems. This review focuses on orthopedic management of the disease, with discussion of key aspects that include scoliosis, muscular contractures, hip joint disorders, fractures, technical devices, and a comparative approach of conservative and surgical treatment. Also emphasized are associated complications including respiratory involvement, perioperative care and anesthesia, nutrition problems, and rehabilitation. The SMA disease course can be greatly improved with adequate therapy with established orthopedic procedures in a multidisciplinary therapeutic approach. Keywords: spinal muscular atrophy, scoliosis, contractures, fractures, lung function, treatment, rehabilitation, surgery, ventilation, nutrition, perioperative management

  14. Optical proximity correction with principal component regression

    Science.gov (United States)

    Gao, Peiran; Gu, Allan; Zakhor, Avideh

    2008-03-01

    An important step in today's Integrated Circuit (IC) manufacturing is optical proximity correction (OPC). In model based OPC, masks are systematically modified to compensate for the non-ideal optical and process effects of optical lithography system. The polygons in the layout are fragmented, and simulations are performed to determine the image intensity pattern on the wafer. Then the mask is perturbed by moving the fragments to match the desired wafer pattern. This iterative process continues until the pattern on the wafer matches the desired one. Although OPC increases the fidelity of pattern transfer to the wafer, it is quite CPU intensive; OPC for modern IC designs can take days to complete on computer clusters with thousands of CPU. In this paper, techniques from statistical machine learning are used to predict the fragment movements. The goal is to reduce the number of iterations required in model based OPC by using a fast and efficient solution as the initial guess to model based OPC. To determine the best model, we train and evaluate several principal component regression models based on prediction error. Experimental results show that fragment movement predictions via regression model significantly decrease the number of iterations required in model based OPC.

  15. Altruism by age and social proximity.

    Directory of Open Access Journals (Sweden)

    Mark C Long

    Full Text Available This study evaluates the extent to which an individual's stated altruistic sentiments can be influenced by context-most importantly, by the age and social proximity of the other person and by the nature of what is being sacrificed. We measure willingness to sacrifice own health for another person's health and willingness to sacrifice own wealth for another person's wealth. To evaluate these sentiments, two surveys were administered to representative samples of Americans which contained hypothetical scenarios with context randomly assigned; the first survey posed a dictator game question and the second survey was designed to elicit marginal rates of substitution between own and other's health/wealth. As expected, we find less altruism towards those who are more socially distant (e.g., strangers relative to family. We find individuals are more health altruistic towards young children and more wealth altruistic towards adults, and health altruism tends to be lowest for survey respondents near retirement age. We find no relationship between levels of altruism and the distance between the respondent's state of birth and state of current residence. These findings improve society's understanding of situational altruism and kinship and reciprocity as motivations for altruism, and they have practical implications concerning the economic valuation of human lives used to guide public policy-making.

  16. Altruism by age and social proximity

    Science.gov (United States)

    2017-01-01

    This study evaluates the extent to which an individual’s stated altruistic sentiments can be influenced by context–most importantly, by the age and social proximity of the other person and by the nature of what is being sacrificed. We measure willingness to sacrifice own health for another person’s health and willingness to sacrifice own wealth for another person’s wealth. To evaluate these sentiments, two surveys were administered to representative samples of Americans which contained hypothetical scenarios with context randomly assigned; the first survey posed a dictator game question and the second survey was designed to elicit marginal rates of substitution between own and other’s health/wealth. As expected, we find less altruism towards those who are more socially distant (e.g., strangers relative to family). We find individuals are more health altruistic towards young children and more wealth altruistic towards adults, and health altruism tends to be lowest for survey respondents near retirement age. We find no relationship between levels of altruism and the distance between the respondent’s state of birth and state of current residence. These findings improve society’s understanding of situational altruism and kinship and reciprocity as motivations for altruism, and they have practical implications concerning the economic valuation of human lives used to guide public policy-making. PMID:28837557

  17. A device for in vivo measurements of quantitative ultrasound variables at the human proximal femur.

    Science.gov (United States)

    Barkmann, Reinhard; Laugier, Pascal; Moser, Urs; Dencks, Stefanie; Klausner, Michael; Padilla, Frédéric; Haïat, Guilleaume; Glüer, Claus-C

    2008-01-01

    Quantitative ultrasound (QUS) at the calcaneus has similar power as a bone mineral density (BMD)- measurement using DXA for the prediction of osteoporotic fracture risk. Ultrasound equipment is less expensive than DXA and free of ionizing radiation. As a mechanical wave, QUS has the potential of measuring different bone properties than dual X-ray absorptiometry (DXA,) which depends on X-ray attenuation and might be developed into a tool of comprehensive assessment of bone strength. However, site-specific DXA at the proximal femur shows best performance in the prediction of hip fractures. To combine the potential of QUS with measurements directly at the femur, we developed a device for in vivo QUS measurements at this site. Methods comprise ultrasound transmission through the bone, reflection from the bone surface, and backscatter from the inner trabecular structure. The complete area of the proximal femur can be scanned except at the femoral head, which interferes with the ilium. To avoid edge artifacts, a subregion of the proximal femur in the trochanteric region was selected as measurement region. First, in vivo measurements demonstrate a good signal to noise ratio and proper depiction of the proximal femur on an attenuation image. Our results demonstrate the feasibility of in vivo measurements. Further improvements can be expected by refinement of the scanning technique and data evaluation method to enhance the potential of the new method for the estimation of bone strength.

  18. On blockage effects for a marine hydrokinetic turbine in free surface proximity

    Science.gov (United States)

    Banerjee, A.; Kolekar, N.

    2016-12-01

    Experimental investigation was carried out with a three-bladed, constant chord marine hydrokinetic turbine to understand the influence of free surface proximity on blockage effects and near wake flow field. The turbine was placed at various depths of immersion as rotational speeds and flow speeds were varied; thrust and torque data was acquired through a submerged thrust torque sensor positioned in-line with the turbine axis. Blockage effects were quantified in terms of changes in power coefficient and were found to be dependent on flow velocity, rotational speed and blade-tip clearence (from free-surface). Flow acceleration near turbine rotation plane was attributed to blockage offered by the rotor, wake, and free surface deformation; the resulting performance improvements were calculated based on the measured thrust values. In addition, stereoscopic particle imaging velocimetry was carried out in the near-wake region using time-averaged and phase-averaged techniques to understand the mechanism responsible for variation of torque (and power coefficient) with rotational speed and free-surface proximity. Flow vizualisation revealed slower wake propagation for higher rotational velocities and increased assymetry in the wake with increasing free surface proximity. Improved performance at high rotational speed was attributed to enhanced wake blockage; performance enhancements with free-surface proximity was attributed to additional blockage effects caused by free surface deformation.

  19. Hip abductor moment arm - a mathematical analysis for proximal femoral replacement

    Directory of Open Access Journals (Sweden)

    Temple H Thomas

    2011-01-01

    Full Text Available Abstract Background Patients undergoing proximal femoral replacement for tumor resection often have compromised hip abductor muscles resulting in a Trendelenberg limp and hip instability. Commercially available proximal femoral prostheses offer several designs with varying sites of attachment for the abductor muscles, however, no analyses of these configurations have been performed to determine which design provides the longest moment arm for the hip abductor muscles during normal function. Methods This study analyzed hip abductor moment arm through hip adduction and abduction with a trigonometric mathematical model to evaluate the effects of alterations in anatomy and proximal femoral prosthesis design. Prosthesis dimensions were taken from technical schematics that were obtained from the prosthesis manufacturers. Manufacturers who contributed schematics for this investigation were Stryker Orthopaedics and Biomet. Results Superior and lateral displacement of the greater trochanter increased the hip abductor mechanical advantage for single-leg stance and adduction and preserved moment arm in the setting of Trendelenberg gait. Hip joint medialization resulted in less variance of the abductor moment arm through coronal motion. The Stryker GMRS endoprosthesis provided the longest moment arm in single-leg stance. Conclusions Hip abductor moment arm varies substantially throughout the hip's range of motion in the coronal plane. Selection of a proximal femur endoprosthesis with an abductor muscle insertion that is located superiorly and laterally will optimize hip abductor moment arm in single-leg stance compared to one located inferiorly or medially.

  20. On the existence of best proximity points for generalized contractions

    Directory of Open Access Journals (Sweden)

    V. Vetrivel

    2014-04-01

    Full Text Available In this article we establish the existence of a unique best proximity point for some generalized non self contractions on a metric space in a simpler way using a geometric result. Our results generalize some recent best proximity point theorems and several fixed point theorems proved by various authors.

  1. Phytochemical, Proximate and Toxicity Studies of Aqueous Extract of ...

    African Journals Online (AJOL)

    Phytochemical, Proximate and Toxicity Studies of Aqueous Extract of Crinum ornatum (Toad's Onion) ... The results indicate that, the bulbs can be considered as a spice that could serve as potential sources of flavouring agent with medicinal benefits. Keywords: Crinum ornatum, Phytochemical, Proximate, Toxicity ...

  2. Proximity and inter-organizational collaboration: a literature review

    NARCIS (Netherlands)

    Knoben, J.; Oerlemans, L.A.G.

    2006-01-01

    The proximity concept is used in many different ways in the literature. These dimensions of proximity are, however, defined and measured in many different (sometimes even contradictory) ways, show large amounts of overlap, and often are under- or over-specified. The goal of this paper is to specify

  3. Proximate composition and levels of some toxicants in four ...

    African Journals Online (AJOL)

    Proximate composition and levels of some toxicants (anti-nutrients) in four commonly consumed spices were investigated. The spices were garlic (Allium sativum), ginger (Zingiber officinale), onion (Allium cepa var. cepa), and Piper guineense seeds (Ashanti pepper). Proximate analyses showed the spices to contain (on ...

  4. Proximal and distal muscle fatigue differentially affect movement coordination.

    Directory of Open Access Journals (Sweden)

    Jeffrey C Cowley

    Full Text Available Muscle fatigue can cause people to change their movement patterns and these changes could contribute to acute or overuse injuries. However, these effects depend on which muscles are fatigued. The purpose of this study was to determine the differential effects of proximal and distal upper extremity muscle fatigue on repetitive movements. Fourteen subjects completed a repetitive ratcheting task before and after a fatigue protocol on separate days. The fatigue protocol either fatigued the proximal (shoulder flexor or distal (finger flexor muscles. Pre/Post changes in trunk, shoulder, elbow, and wrist kinematics were compared to determine how proximal and distal fatigue affected multi-joint movement patterns and variability. Proximal fatigue caused a significant increase (7°, p < 0.005 in trunk lean and velocity, reduced humeral elevation (11°, p < 0.005, and increased elbow flexion (4°, p < 0.01. In contrast, distal fatigue caused small but significant changes in trunk angles (2°, p < 0.05, increased velocity of wrench movement relative to the hand (17°/s, p < 0.001, and earlier wrist extension (4%, p < 0.005. Movement variability increased at proximal joints but not distal joints after both fatigue protocols (p < 0.05. Varying movements at proximal joints may help people adapt to fatigue at either proximal or distal joints. The identified differences between proximal and distal muscle fatigue adaptations could facilitate risk assessment of occupational tasks.

  5. Properties of Sn-Ag proximity effect bridges

    Energy Technology Data Exchange (ETDEWEB)

    Fan Hongchang; Yu Zheng

    1983-09-01

    We have measured the I-V characteristics, I/sub c/(t) and T/sub c/ of Sn-Ag proximity effect bridges, obtaining some interesting results. We have also analyzed and tried to explain the results in terms of phenomenological theories, believing that microbridge theories of Skocpol, Beasley and Tinkham (SBT) also apply to our proximity effect bridges.

  6. Determination of Proximate Composition and Amino Acid Profile of ...

    African Journals Online (AJOL)

    The proximate composition and amino acid profile of the seed of 30 Nigerian sesame genotypes were determined based on the standard methods of the Association of Official Analytical Chemists (AOAC) and the Sequential Multi- sample amino acid Analyzer (TSM). Proximate analysis showed that sesame seed contained ...

  7. Management of proximal interphalangeal joint dislocations in athletes.

    Science.gov (United States)

    Bindra, Randy R; Foster, Brian J

    2009-08-01

    Proximal interphalangeal joint dislocations are common athletic injuries. In dislocations and fracture dislocations, the most important treatment principle is congruent joint reduction and maintenance of stability. This article reviews the relevant anatomy, injury characteristics, and treatment options for proximal interphalangeal joint dislocations and fracture dislocations. Treatment methods discussed include closed reduction, percutaneous fixation, and open reduction.

  8. Water Balance and Proximate Composition in Cowpea ( vigna ...

    African Journals Online (AJOL)

    Studying the water balance and proximate composition in plants subjected to these stresses compared the influence of drought and flooding on cowpea seedlings. In drought plants the leaf water potential, its components and the proximate composition were markedly reduced by the end of the experimental period.

  9. Cast index in predicting outcome of proximal pediatric forearm fractures

    Directory of Open Access Journals (Sweden)

    Hassaan Qaiser Sheikh

    2015-01-01

    Conclusion: Cast index is useful in predicting redisplacement of manipulated distal forearm fractures. We found that in proximal half forearm fractures it is difficult to achieve a CI of <0.8, but increased CI does not predict loss of position in these fractures. We therefore discourage the use of CI in proximal half forearm fractures.

  10. Proximate composition and mineral contents of Pebbly fish, Alestes ...

    African Journals Online (AJOL)

    ACSS

    The objective of this study was to determine the proximate composition and mineral contents of A. ... and also develop suitable processing method. This study determined the proximate composition and mineral contents of A. baremoze fillets based on fish size. Materials and .... moisture contents can vary with sex of the fish ...

  11. proximal femur geometry in the adult kenyan femur and its ...

    African Journals Online (AJOL)

    implications considering that the implants used to treat fractures in the proximal femur would usually traverse the neck and lodge in the femoral head. A very narrow neck may not allow adequate implant placement especially for those implants that employ two proximal locking screws. This has been shown, in a study by ...

  12. Perceptual atoms: proximal motion vector-structures and the perception of object motion in depth

    Directory of Open Access Journals (Sweden)

    Hershenson Maurice

    2003-01-01

    Full Text Available A framework is proposed for analyzing the perception of motion in depth produced by simple proximal motion patterns of two to four points. The framework includes input structure, perceptual system constraints, and a depth scaling mechanism. The input is relational stimulation described by two proximal dimensions, orientation and separation, that can change or remain constant over the course of a motion pattern. Combinations of change or no-change in these dimensions yield four basic patterns of proximal stimulation: parallel, circular, perspective, and parallax. These primary patterns initiate automatic processing mechanisms - a unity constraint that treats pairs of points as connected and a rigidity constraint that treats the connection as rigid. When the constraints are activated by perspective or parallax patterns, the rigid connection between the points also appears to move in depth. A scaling mechanism governs the degree to which the objects move in depth in order to maintain the perceived rigidity. Although this framework is sufficient to explain perceptions produced by three- and four-point motion patterns in most cases, some patterns require additional configurational factors to supplement the framework. Nevertheless, perceptual qualities such as shrinking, stretching, bending, and folding emerge from the application of the same processing constraints and depth scaling factors as those that produce the perception of rigid objects moving in depth.

  13. Spontaneous Healing of a Pediatric Scaphoid Proximal Pole Fracture Nonunion.

    Science.gov (United States)

    Rupani, Neal; Riley, Nicholas; McNab, Ian

    2018-02-01

    Background  Scaphoid fractures in the pediatric population are rare. The majority of nondisplaced fractures tend to unite; however, there is an increased risk of nonunion in proximal pole fractures. Limited evidence exists in their outcomes, owing to the scarcity of the fracture pattern. Case Description  A 13-year-old boy who presented late after developing a traumatic proximal pole scaphoid fracture developed nonunion. He was treated conservatively owing to it being asymptomatic and developed union at 18 months. Literature Review  No previous case of proximal pole pediatric scaphoid fractures with established nonunion that has developed union with conservative management has been described. Clinical Relevance  The authors highlight a unique case of an established proximal pole scaphoid nonunion in a child progressing to union with nonoperative intervention. Owing to its rarity and difficulty in obtaining research, we recommend consideration of nonoperative management of asymptomatic nondisplaced proximal pole fractures in children.

  14. Renal proximal tubular reabsorption is reduced in adult spontaneously hypertensive rats: roles of superoxide and Na+/H+ exchanger 3.

    Science.gov (United States)

    Panico, Carolina; Luo, Zaiming; Damiano, Sara; Artigiano, Francesca; Gill, Pritmohinder; Welch, William J

    2009-12-01

    Proximal tubule reabsorption is regulated by systemic and intrinsic mechanisms, including locally produced autocoids. Superoxide, produced by NADPH oxidase enhances NaCl transport in the loop of Henle and the collecting duct, but its role in the proximal tubule is unclear. We measured proximal tubule fluid reabsorption (Jv) in WKY rats and compared that with Jv in the spontaneously hypertensive rat (SHR), a model of enhanced renal superoxide generation. Rats were treated with the NADPH oxidase inhibitor apocynin (Apo) or with small interfering RNA for p22(phox), which is the critical subunit of NADPH oxidase. Jv was lower in SHR compared with Wistar-Kyoto rats (WKY; WKY: 2.3+/-0.3 vs SHR: 1.1+/-0.2 nL/min per millimeter; n=9 to 11; P<0.001). Apo and small interfering RNA to p22(phox) normalized Jv in SHRs but had no effect in WKY rats. Jv was reduced in proximal tubules perfused with S-1611, a highly selective inhibitor of the Na(+)/H(+) exchanger 3, the major Na(+) uptake pathway in the proximal tubule, in WKY rats but not in SHRs. Pretreatment with Apo restored an effect of S-1611 to reduce Jv in the SHRs (SHR+Apo: 2.9+/-0.4 vs SHR+Apo+S-1611: 1.0+/-0.3 nL/min per millimeter; P<0.001). However, because expression of the Na(+)/H(+) exchanger 3 was similar between SHR and WKY rats, this suggests that superoxide affects Na(+)/H(+) exchanger 3 activity. Direct microperfusion of Tempol or Apo into the proximal tubule also restored Jv in SHRs. In conclusion, superoxide generated by NADPH oxidase inhibits proximal tubule fluid reabsorption in SHRs. This finding implies that proximal tubule fluid reabsorption is regulated by redox balance, which may have profound effects on ion and fluid homeostasis in the hypertensive kidney.

  15. Proximate, chemical compositions and sulphur concentrations on ...

    African Journals Online (AJOL)

    aghomotsegin

    2013-05-08

    May 8, 2013 ... ... food will include its content of protein, carbohydrates, fat and oil, moisture ... to sugars such as fructose, glucose and sucrose ..... health benefits deriving from consuming high levels of ... mechanisms (Dragsted et al., 1993).

  16. Nanocrystal Bioassembly: Asymmetry, Proximity, and Enzymatic Manipulation

    Energy Technology Data Exchange (ETDEWEB)

    Claridge, Shelley A. [Univ. of California, Berkeley, CA (United States)

    2008-05-01

    Research at the interface between biomolecules and inorganic nanocrystals has resulted in a great number of new discoveries. In part this arises from the synergistic duality of the system: biomolecules may act as self-assembly agents for organizing inorganic nanocrystals into functional materials; alternatively, nanocrystals may act as microscopic or spectroscopic labels for elucidating the behavior of complex biomolecular systems. However, success in either of these functions relies heavily uponthe ability to control the conjugation and assembly processes.In the work presented here, we first design a branched DNA scaffold which allows hybridization of DNA-nanocrystal monoconjugates to form discrete assemblies. Importantly, the asymmetry of the branched scaffold allows the formation of asymmetric2assemblies of nanocrystals. In the context of a self-assembled device, this can be considered a step toward the ability to engineer functionally distinct inputs and outputs.Next we develop an anion-exchange high performance liquid chromatography purification method which allows large gold nanocrystals attached to single strands of very short DNA to be purified. When two such complementary conjugates are hybridized, the large nanocrystals are brought into close proximity, allowing their plasmon resonances to couple. Such plasmon-coupled constructs are of interest both as optical interconnects for nanoscale devices and as `plasmon ruler? biomolecular probes.We then present an enzymatic ligation strategy for creating multi-nanoparticle building blocks for self-assembly. In constructing a nanoscale device, such a strategy would allow pre-assembly and purification of components; these constructs can also act as multi-label probes of single-stranded DNA conformational dynamics. Finally we demonstrate a simple proof-of-concept of a nanoparticle analog of the polymerase chain reaction.

  17. Translational Imaging Spectroscopy for Proximal Sensing.

    Science.gov (United States)

    Rogass, Christian; Koerting, Friederike M; Mielke, Christian; Brell, Maximilian; Boesche, Nina K; Bade, Maria; Hohmann, Christian

    2017-08-11

    Proximal sensing as the near field counterpart of remote sensing offers a broad variety of applications. Imaging spectroscopy in general and translational laboratory imaging spectroscopy in particular can be utilized for a variety of different research topics. Geoscientific applications require a precise pre-processing of hyperspectral data cubes to retrieve at-surface reflectance in order to conduct spectral feature-based comparison of unknown sample spectra to known library spectra. A new pre-processing chain called GeoMAP-Trans for at-surface reflectance retrieval is proposed here as an analogue to other algorithms published by the team of authors. It consists of a radiometric, a geometric and a spectral module. Each module consists of several processing steps that are described in detail. The processing chain was adapted to the broadly used HySPEX VNIR/SWIR imaging spectrometer system and tested using geological mineral samples. The performance was subjectively and objectively evaluated using standard artificial image quality metrics and comparative measurements of mineral and Lambertian diffuser standards with standard field and laboratory spectrometers. The proposed algorithm provides highly qualitative results, offers broad applicability through its generic design and might be the first one of its kind to be published. A high radiometric accuracy is achieved by the incorporation of the Reduction of Miscalibration Effects (ROME) framework. The geometric accuracy is higher than 1 μpixel. The critical spectral accuracy was relatively estimated by comparing spectra of standard field spectrometers to those from HySPEX for a Lambertian diffuser. The achieved spectral accuracy is better than 0.02% for the full spectrum and better than 98% for the absorption features. It was empirically shown that point and imaging spectrometers provide different results for non-Lambertian samples due to their different sensing principles, adjacency scattering impacts on the signal

  18. Treeline proximity alters an alpine plant-herbivore interaction.

    Science.gov (United States)

    Illerbrun, Kurt; Roland, Jens

    2011-05-01

    Rising treeline threatens the size and contiguity of alpine meadows worldwide. As trees encroach into previously open habitat, the movement and population dynamics of above-treeline alpine species may be disrupted. This process is well documented in studies of the Rocky Mountain apollo butterfly (Parnassius smintheus). However, subtler consequences of treeline rise remain poorly understood. In this study, we examine whether treeline proximity affects feeding behaviour of P. smintheus larvae, due to altered habitat affecting the distribution and availability of their host plant, lance-leaved stonecrop (Sedum lanceolatum). Understanding differential larval exploitation of food resources in relation to the treeline is an important step in predicting the consequences of continued treeline rise. Parnassius smintheus larvae feed more intensively on S. lanceolatum away from the treeline despite the relative paucity of hosts in these areas, and despite higher fitness penalties associated with the plant's herbivory-induced chemical defenses. Sedum lanceolatum growing near the treeline is less attractive, and therefore represents a less significant resource for P. smintheus larvae than its abundance might imply. If treeline rise continues, we suggest that this pattern of altered resource exploitation may represent a mechanism by which larvae are adversely affected even while adult movement among and within meadows appears sufficient for maintaining population health, and total host availability seems ample.

  19. Proximity and touch sensing using deformable ionic conductors (Conference Presentation)

    Science.gov (United States)

    Madden, John D. W.; Dobashi, Yuta; Sarwar, Mirza S.; Preston, Eden C.; Wyss, Justin K. M.; Woehling, Vincent; Nguyen, Tran-Minh-Giao; Plesse, Cedric; Vidal, Frédéric; Naficy, Sina; Spinks, Geoffrey M.

    2017-04-01

    There is increasing interest in creating bendable and stretchable electronic interfaces that can be worn or applied to virtually any surface. The electroactive polymer community is well placed to add value by incorporating sensors and actuators. Recent work has demonstrated transparent dielectric elastomer actuation as well as pressure, stretch or touch sensing. Here we present two alternative forms of sensing. The first uses ionically conductive and stretchable gels as electrodes in capacitive sensors that detect finger proximity. In this case the finger acts as a third electrode, reducing capacitance between the two gel electrodes as it approaches, which can be detected even during bending and stretching. Very light finger touch is readily detected even during deformation of the substrate. Lateral resolution is achieved by creating a sensor array. In the second approach, electrodes placed beneath a salt containing gel are able to detect ion currents generated by the deformation of the gel. In this approach, applied pressure results in ion currents that create a potential difference around the point of contact, leading to a voltage and current in the electrodes without any need for input electrical energy. The mechanism may be related to effects seen in ionomeric polymer metal composites (IPMCs), but with the response in plane rather than through the thickness of the film. Ultimately, these ionically conductive materials that can also be transparent and actuate, have the potential to be used in wearable devices.

  20. Numerical Optimization of the Position in Femoral Head of Proximal Locking Screws of Proximal Femoral Nail System; Biomechanical Study.

    Science.gov (United States)

    Konya, Mehmet Nuri; Verim, Özgür

    2017-09-29

    Proximal femoral fracture rates are increasing due to osteoporosis and traffic accidents. Proximal femoral nails are routinely used in the treatment of these fractures in the proximal femur. To compare various combinations and to determine the ideal proximal lag screw position in pertrochanteric fractures (Arbeitsgemeinschaft für Osteosynthesefragen classification 31-A1) of the femur by using optimized finite element analysis. Biomechanical study. Computed tomography images of patients' right femurs were processed with Mimics. Afterwards a solid femur model was created with SolidWorks 2015 and transferred to ANSYS Workbench 16.0 for response surface optimization analysis which was carried out according to anterior-posterior (-10°0) and posterior-anterior directions of the femur neck significantly increased these stresses. The most suitable position of the proximal lag screw was confirmed as the middle of the femoral neck by using optimized finite element analysis.

  1. Instrument access device for instrument access system, has connector member connecting proximal member with instrument seals, where proximal member and connector member are configured to retain proximal end of retractor member

    OpenAIRE

    Bonadio, Frank; Vaugh, Trevor; McManus, Ronan; MacNally, Shane

    2010-01-01

    The device (203) has instrument seals sealingly arranged in a body of a patient, and a distal anchoring member located in a wound interior. A retractor member is proximally extended from a distal anchoring member to retract sides of a wound opening. A proximal member is adopted for locating an external part of the wound opening. A connector member connects the proximal member with the instrument seals. The proximal member and the connector member are configured to retain a proximal end of the...

  2. Effect of age on proximal esophageal response to swallowing

    Directory of Open Access Journals (Sweden)

    Roberto Oliveira Dantas

    2010-12-01

    Full Text Available CONTEXT: It has been demonstrated that the ageing process affects esophageal motility. OBJECTIVES: To evaluate the effect of the age on the proximal esophageal response to wet swallows. METHOD: We measured the proximal esophageal response to swallows of a 5 mL bolus of water in 69 healthy volunteers, 20 of them aged 18-30 years (group I, 27 aged 31-50 years (group II, and 22 aged 51-74 years (group III. We used the manometric method with continuous perfusion. The proximal esophageal contractions were recorded 5 cm from a pharyngeal recording site located 1 cm above the upper esophageal sphincter. The time between the onset of the pharyngeal and of the proximal esophageal recording (pharyngeal-esophageal time and the amplitude, duration and area under the curve of the proximal esophageal contraction were measured. RESULTS: The pharyngeal-esophageal time was shorter in group I subjects than in group II and III subjects (P<0.05. The duration of proximal esophageal contractions was longer in group I than in groups II and III (P<0.001. There was no differences between groups in the amplitude or area under the curve of contractions. There were no differences between groups II and III for any of the measurements. CONCLUSION: We conclude that the age may affects the response of the proximal esophagus to wet swallows.

  3. Dual pathology proximal median nerve compression of the forearm.

    LENUS (Irish Health Repository)

    Murphy, Siun M

    2013-12-01

    We report an unusual case of synchronous pathology in the forearm- the coexistence of a large lipoma of the median nerve together with an osteochondroma of the proximal ulna, giving rise to a dual proximal median nerve compression. Proximal median nerve compression neuropathies in the forearm are uncommon compared to the prevalence of distal compression neuropathies (eg Carpal Tunnel Syndrome). Both neural fibrolipomas (Refs. 1,2) and osteochondromas of the proximal ulna (Ref. 3) in isolation are rare but well documented. Unlike that of a distal compression, a proximal compression of the median nerve will often have a definite cause. Neural fibrolipoma, also called fibrolipomatous hamartoma are rare, slow-growing, benign tumours of peripheral nerves, most often occurring in the median nerve of younger patients. To our knowledge, this is the first report of such dual pathology in the same forearm, giving rise to a severe proximal compression of the median nerve. In this case, the nerve was being pushed anteriorly by the osteochondroma, and was being compressed from within by the intraneural lipoma. This unusual case highlights the advantage of preoperative imaging as part of the workup of proximal median nerve compression.

  4. Digital contrast subtraction radiography for proximal caries diagnosis

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Byung Cheol; Yoon, Suk Ja [Department of Dental Radiology, Chonnam National University Hospital, Gwangju (Korea, Republic of)

    2002-06-15

    To determine whether subtraction images utilizing contrast media can improve the diagnostic performance of proximal caries diagnosis compared to conventional periapical radiographic images. Thirty-six teeth with 57 proximal surfaces were radiographied using a size no.2 RVG-ui sensor (Trophy Radiology, Marne-la-Vallee, France). The teeth immersed in water-soluble contrast media and subtraction images were taken. Each tooth was then sectioned for histologic examination. The digital radiographic images and subtraction images were examined and interpreted by three dentists for proximal caries. The results of the proximal caries diagnosis were then verified with the results of the histologic examination. The proximal caries sensitivity using digital subtraction radiography was significantly higher than simply examining a single digital radiograph. The sensitivity of the proximal dentinal carious lesion when analyzed with the subtraction radiograph and the radiograph together was higher than with the subtraction radiograph or the radiograph alone. The use of subtraction radiography with contrast media may be useful for detecting proximal dentinal carious lesions.

  5. Creep of trabecular bone from the human proximal tibia

    Energy Technology Data Exchange (ETDEWEB)

    Novitskaya, Ekaterina, E-mail: eevdokim@ucsd.edu [Mechanical and Aerospace Engineering, UC, San Diego, La Jolla, CA 92093 (United States); Materials Science and Engineering Program, UC, San Diego, La Jolla, CA 92093 (United States); Zin, Carolyn [Materials Science and Engineering, Johns Hopkins University, Baltimore, MD 21218 (United States); Chang, Neil; Cory, Esther; Chen, Peter [Departments of Bioengineering and Orthopaedic Surgery, UC, San Diego, La Jolla, CA 92093 (United States); D’Lima, Darryl [Shiley Center for Orthopaedic Research and Education, Scripps Health, La Jolla, CA 92037 (United States); Sah, Robert L. [Materials Science and Engineering Program, UC, San Diego, La Jolla, CA 92093 (United States); Departments of Bioengineering and Orthopaedic Surgery, UC, San Diego, La Jolla, CA 92093 (United States); McKittrick, Joanna [Mechanical and Aerospace Engineering, UC, San Diego, La Jolla, CA 92093 (United States); Materials Science and Engineering Program, UC, San Diego, La Jolla, CA 92093 (United States)

    2014-07-01

    Creep is the deformation that occurs under a prolonged, sustained load and can lead to permanent damage in bone. Creep in bone is a complex phenomenon and varies with type of loading and local mechanical properties. Human trabecular bone samples from proximal tibia were harvested from a 71-year old female cadaver with osteoporosis. The samples were initially subjected to one cycle load up to 1% strain to determine the creep load. Samples were then loaded in compression under a constant stress for 2 h and immediately unloaded. All tests were conducted with the specimens soaked in phosphate buffered saline with proteinase inhibitors at 37 °C. Steady state creep rate and final creep strain were estimated from mechanical testing and compared with published data. The steady state creep rate correlated well with values obtained from bovine tibial and human vertebral trabecular bone, and was higher for lower density samples. Tissue architecture was analyzed by micro-computed tomography (μCT) both before and after creep testing to assess creep deformation and damage accumulated. Quantitative morphometric analysis indicated that creep induced changes in trabecular separation and the structural model index. A main mode of deformation was bending of trabeculae. - Highlights: • Compressive creep tests of human trabecular bone across the tibia were performed. • The creep rate was found to be inversely proportional to the density of the samples. • μ-computed tomography before and after testing identified regions of deformation. • Bending of the trabeculae was found to be the main deformation mode.

  6. Proximity to urban parks and mental health.

    Science.gov (United States)

    Sturm, Roland; Cohen, Deborah

    2014-03-01

    Urban parks have received attention in recent years as a possible environmental factor that could encourage physical activity, prevent obesity, and reduce the incidence of chronic conditions. Despite long hypothesized benefits of parks for mental health, few park studies incorporate mental health measures. To test the association between proximity to urban parks and psychological distress. Cross-sectional analysis of individual health survey responses. Data were collected for a study of capital improvements of neighborhood parks in Los Angeles. A survey was fielded on a sample of residential addresses, stratified by distance from the park (within 400m, 800m, 1.6 km, and 3.2km; N=1070). We used multiple regression to estimate the relationship between the psychological distress as measured by the MHI-5 (outcome variable) and distance to parks (main explanatory variable), controlling for observed individual characteristics. Mental health is significantly related to residential distance from parks, with the highest MHI-5 scores among residents within short walking distance from the park (400m) and decreasing significantly over the next distances. The number of visits and physical activity minutes are significantly and independently related to distance, although controlling for them does not reduce the association between distance and mental health. This paper provides a new data point for an arguably very old question, but for which empirical data are sparse for the US. A nearby urban park is associated with the same mental health benefits as decreasing local unemployment rates by 2 percentage points, suggesting at least the potential of environmental interventions to improve mental health. The analysis is cross-sectional, making it impossible to control for important confounders, including residential selection. Mental health policy has traditionally focused on individual-centered interventions. Just as health policy for preventable chronic illnesses has shifted

  7. Proximal caries detection: Sirona Sidexis versus Kodak Ektaspeed Plus.

    Science.gov (United States)

    Khan, Emad A; Tyndall, Donald A; Ludlow, John B; Caplan, Daniel

    2005-01-01

    This study compared the accuracy of intraoral film and a charge-coupled device (CCD) receptor for proximal caries detection. Four observers evaluated images of the proximal surfaces of 40 extracted posterior teeth. The presence or absence of caries was scored using a five-point confidence scale. The actual status of each surface was determined from ground section histology. Responses were evaluated by means of receiver operating characteristic (ROC) analysis. Areas under ROC curves (Az) were assessed through a paired t-test. The performance of the CCD-based intraoral sensor was not different statistically from Ektaspeed Plus film in detecting proximal caries.

  8. Locking screw-plate interface stability in carbon-fibre reinforced polyetheretherketone proximal humerus plates.

    Science.gov (United States)

    Hak, David J; Fader, Ryan; Baldini, Todd; Chadayammuri, Vivek B S

    2017-07-13

    Carbon-fibre reinforced polyetheretherketone (CFR-PEEK) plates have recently been introduced for proximal humerus fracture treatment. The purpose of this study was to compare the locking screw-plate interface stability in CFR-PEEK versus stainless steel (SS) proximal humerus plates. Locking screw mechanical stability was evaluated independently in proximal and shaft plate holes. Stiffness and load to failure were tested for three conditions: (1) on-axis locking screw insertion in CFR-PEEK versus SS plates, (2) on-axis locking screw insertion, removal, and reinsertion in CFR-PEEK plates, and (3) 10-degree off-axis locking screw insertion in CFR-PEEK plates. Cantilever bending at a rate of 1 mm/minute was produced by an Instron machine and load-displacement data recorded. Shaft locking screw load to failure was significantly greater in CFR-PEEK plates compared to SS plates (746.4 ± 89.7 N versus 596.5 ± 32.6 N, p PEEK plates (p PEEK plates. The mechanical stability of locking screws in CFR-PEEK plates is comparable or superior to locking screws in SS plates.

  9. Proximal-to-distal sequencing in vertical jumping with and without arm swing.

    Science.gov (United States)

    Chiu, Loren Z F; Bryanton, Megan A; Moolyk, Amy N

    2014-05-01

    Vertical jumping performance is dependent on muscle strength and motor skill. An understanding of motor skill strategies and their influence on jumping mechanics provides insight into how to improve performance. This study aimed to determine whether kinematic sequencing strategy influenced jump height, the effect of sequencing on jumping mechanics, and whether arm swing influences sequencing strategy. Women volleyball players (n = 16) performed vertical jumps with and without arm swing on force platforms while recorded with a 6-camera motion capture system. Sequencing strategy was determined as the relative time delay between pelvis and knee extension. A long time delay indicated a proximal-to-distal strategy, whereas no time delay represented a simultaneous strategy. Longer relative time delay was correlated with higher jump height in jumps with (r = 0.82, p jump height were associated with greater hip extensor and ankle plantar flexor net joint moments (NJM), and greater ratio of concentric to eccentric knee extensor NJM (p ≤ 0.05). Longer relative time delay and higher jump height were correlated with greater thigh and leg angular accelerations (p ≤ 0.05). These kinetic and kinematic variables, along with relative time delay and jump height were greater in jumps with arm swing than without (p ≤ 0.05), indicating arm swing promotes use of a proximal-to-distal strategy. Use of a proximal-to-distal strategy is associated with greater NJM and segment accelerations, which may contribute to better vertical jump performance.

  10. [Biomechanical investigation of fixed-angle plate osteosynthesis of the proximal humerus].

    Science.gov (United States)

    Röderer, G; AbouElsoud, M; Gebhard, F; Claes, L; Aschoff, A J; Kinzl, L

    2010-02-01

    Proximal humeral fractures are common in the elderly population and are often associated with osteoporosis. Fixation of unstable proximal humeral fractures is problematic due to loss of fixation in osteoporotic bone. Fixed-angle devices are intended to provide superior mechanical stability due to the principle of an internal fixator. The NCB(R)-PH (non-contact-bridging proximal humerus) plate is a new fixed-angle device that locks the screws to the plate by secondary insertion of a locking cap. The aim of this study was to investigate if and to what extent NCB-PH plates applied in the locked mode provide higher mechanical stability in a proximal humerus fracture model. For this investigation 16 (8 pairs) fresh frozen cadaveric humeri were used. An AO/ASIF 11-B 1 fracture of the proximal humerus was created in each bone and fixed with the NCB-PH plate. In a paired setting one bone was fixed with the plate in the locked mode and the other with the plate in the non-locked mode. The bones were then subjected to 100 cycles of axial loading and interfragmentary motion was measured. Bones surviving this test were subjected to load-to-failure testing and the force at which failure occurred was recorded. Bones fixed with the plate in the locked mode showed a statistically significant lower (51%) interfragmentary rotation compared to bones fixed with the plate in the non-locked mode. There was also a tendency for the bones fixed with the plate in the locked mode to fail first under higher forces (16%) during load-to-failure testing. The NCB-PH plate provides superior interfragmentary stability when used in the locked mode in a human cadaveric proximal humerus fracture model. Therefore, we recommend that all screws should be inserted in the locked mode. The results suggest that the NCB-PH plate in the locked mode provides higher primary postoperative stability thus permitting early functional treatment of the patient.

  11. Isolation and characterization of a primary proximal tubular epithelial cell model from human kidney by CD10/CD13 double labeling.

    Science.gov (United States)

    Van der Hauwaert, Cynthia; Savary, Grégoire; Gnemmi, Viviane; Glowacki, François; Pottier, Nicolas; Bouillez, Audrey; Maboudou, Patrice; Zini, Laurent; Leroy, Xavier; Cauffiez, Christelle; Perrais, Michaël; Aubert, Sébastien

    2013-01-01

    Renal proximal tubular epithelial cells play a central role in renal physiology and are among the cell types most sensitive to ischemia and xenobiotic nephrotoxicity. In order to investigate the molecular and cellular mechanisms underlying the pathophysiology of kidney injuries, a stable and well-characterized primary culture model of proximal tubular cells is required. An existing model of proximal tubular cells is hampered by the cellular heterogeneity of kidney; a method based on cell sorting for specific markers must therefore be developed. In this study, we present a primary culture model based on the mechanical and enzymatic dissociation of healthy tissue obtained from nephrectomy specimens. Renal epithelial cells were sorted using co-labeling for CD10 and CD13, two renal proximal tubular epithelial markers, by flow cytometry. Their purity, phenotypic stability and functional properties were evaluated over several passages. Our results demonstrate that CD10/CD13 double-positive cells constitute a pure, functional and stable proximal tubular epithelial cell population that displays proximal tubule markers and epithelial characteristics over the long term, whereas cells positive for either CD10 or CD13 alone appear to be heterogeneous. In conclusion, this study describes a method for establishing a robust renal proximal tubular epithelial cell model suitable for further experimentation.

  12. Isolation and characterization of a primary proximal tubular epithelial cell model from human kidney by CD10/CD13 double labeling.

    Directory of Open Access Journals (Sweden)

    Cynthia Van der Hauwaert

    Full Text Available Renal proximal tubular epithelial cells play a central role in renal physiology and are among the cell types most sensitive to ischemia and xenobiotic nephrotoxicity. In order to investigate the molecular and cellular mechanisms underlying the pathophysiology of kidney injuries, a stable and well-characterized primary culture model of proximal tubular cells is required. An existing model of proximal tubular cells is hampered by the cellular heterogeneity of kidney; a method based on cell sorting for specific markers must therefore be developed. In this study, we present a primary culture model based on the mechanical and enzymatic dissociation of healthy tissue obtained from nephrectomy specimens. Renal epithelial cells were sorted using co-labeling for CD10 and CD13, two renal proximal tubular epithelial markers, by flow cytometry. Their purity, phenotypic stability and functional properties were evaluated over several passages. Our results demonstrate that CD10/CD13 double-positive cells constitute a pure, functional and stable proximal tubular epithelial cell population that displays proximal tubule markers and epithelial characteristics over the long term, whereas cells positive for either CD10 or CD13 alone appear to be heterogeneous. In conclusion, this study describes a method for establishing a robust renal proximal tubular epithelial cell model suitable for further experimentation.

  13. Modified esophagogastrostomy in laparoscopy-assisted proximal gastrectomy: A reverse-Tornado anastomosis.

    Science.gov (United States)

    Kubota, Keisuke; Suzuki, Akihiro; Fujikawa, Aoi; Watanabe, Takayuki; Sekido, Yuki; Shiozaki, Hironori; Taketa, Takashi; Shimada, Gen; Ohigashi, Seiji; Sakurai, Shintaro; Kishida, Akihiro

    2017-02-01

    The aim of this study was to introduce and examine a modified mechanical end-to-side esophagogastrostomy method ("reverse-Tornado" anastomosis) in laparoscopy-assisted proximal gastrectomy. Five patients with gastric cancer who underwent laparoscopy-assisted proximal gastrectomy were analyzed retrospectively. Esophagogastrostomy in the anterior wall was performed in three patients, and esophagogastrostomy in the posterior wall was performed in two patients. Clinicopathological features, operative outcomes (operative time, operative blood loss), and postoperative outcomes (complications, postoperative hospital stay, reflux esophagitis) were evaluated. Operative time was normal (278 min). There was no marked operative blood loss, postoperative complications, prolonged hospital stay, or reflux esophagitis. Esophagogastrostomy was completed in a normal time with reverse-Tornado anastomosis. This method can be safe and can enable good postoperative quality of life. © 2016 Japan Society for Endoscopic Surgery, Asia Endosurgery Task Force and John Wiley & Sons Australia, Ltd.

  14. 'Trampoline fracture' of the proximal tibia in children: report of 3 cases and review of literature.

    Science.gov (United States)

    Bruyeer, E; Geusens, E; Catry, F; Vanstraelen, L; Vanhoenacker, F

    2012-01-01

    We present three cases of fracture of the proximal tibia in young children who were jumping on a trampoline. The typical radiological findings and the underlying mechanism of trauma are discussed. The key radiological features are: a transverse hairline fracture of the upper tibia often accompanied by a buckle fracture of the lateral or medial tibial cortex, buckling of the anterior upper tibial cortex and anterior tilting of the epiphyseal plate. New types of injuries related to specific recreational activities are recognized. It is often helpful to associate a typical injury with a particular activity. Trampoline related injuries have increased dramatically over the last years. The most common lesions are fractures and ligamentous injuries, in particular a transverse fracture of the proximal tibia. However the radiological findings can be very subtle and easily overlooked. It is therefore important to be aware of the typical history and radiological findings.

  15. Effects of phospho- and calciotropic hormones on electrolyte transport in the proximal tubule

    DEFF Research Database (Denmark)

    Lee, Justin J; Plain, Allein; Beggs, Megan R

    2017-01-01

    as their regulation of active vitamin D 3 synthesis in this nephron segment. The integrative effects of both phospho- and calciotropic hormones on proximal tubular solute transport and subsequently whole body calcium-phosphate balance thus have been further complicated. Here, we first review the molecular mechanisms......Calcium and phosphate are critical for a myriad of physiological and cellular processes within the organism. Consequently, plasma levels of calcium and phosphate are tightly regulated. This occurs through the combined effects of the phospho- and calciotropic hormones, parathyroid hormone (PTH...... of calcium and phosphate reabsorption from the proximal tubule and how they are influenced by the phospho- and calciotropic hormones acting on this segment and then consider the implications on both renal calcium and phosphate handling as well as whole body mineral balance....

  16. Axillary artery lesion secondary to fracturing of the proximal third of the humerus: case report

    Directory of Open Access Journals (Sweden)

    Alberto Naoki Miyazaki

    2015-02-01

    Full Text Available Lesions of the axillary artery are rare in patients with fracturing of the proximal third of the humerus and may have greatly varying clinical manifestations. They are responsible for 15% and 20% of upper-limb artery injuries and the commonest mechanism is a fall to the ground, which accounts for 79% of such injuries. In some cases, the signs only appear later on. It is important to bear this association in mind, so as to make an early diagnosis and avoid serious complications. We report on a case of traumatic injury of the axillary artery secondary to fracturing of the proximal third of the humerus in an 84-year-old patient, with late evolution of clinical signs of ischemia in the limb affected. The aim here was to discuss the diagnostic difficulties and treatment.

  17. TopWorx/GO switch new generation nuclear qualified proximity position sensors

    Energy Technology Data Exchange (ETDEWEB)

    Merrifield, G. [TopWorx/Emerson Process Control, Louisville, Kentucky (United States)

    2011-07-01

    An overview of the benefits of installing TopWorx/GO Nuclear Qualified Proximity Position Sensors instead of traditional mechanical switches. Mechanical switches have been the standard for the nuclear industry for years, but that is only because of lack of competition. Because of multiple moving parts, three-piece design, and new low current control systems, mechanical switches are susceptible to a host of environmental factors that cause them to break and/or fail. TopWorx/GO Switch is a smaller, rugged, dependable, one-piece Stainless Steel proximity position sensor that that exceeds CANDU and Global Qualification Levels, easily replacing mechanical switches. It is the only position sensor to meet or exceed Westinghouse AP 1000 specifications as well. Nuclear facilities save money in maintenance reductions, extended PM's and reduction in 'Man REM' hours. This is achieved by not having to service and replace GO Switch position sensors as often as mechanical switches, since their qualified life is 100 years +1 Post Accident submerged. Plant safety is increased due to less switch failure, higher qualification testing levels, repeatability and longer qualified life. (author)

  18. On Optimal Fuzzy Best Proximity Coincidence Points of Proximal Contractions Involving Cyclic Mappings in Non-Archimedean Fuzzy Metric Spaces

    Directory of Open Access Journals (Sweden)

    Manuel De la Sen

    2017-04-01

    Full Text Available The main objective of this paper is to deal with some properties of interest in two types of fuzzy ordered proximal contractions of cyclic self-mappings T integrated in a pair ( g , T of mappings. In particular, g is a non-contractive fuzzy self-mapping, in the framework of non-Archimedean ordered fuzzy complete metric spaces and T is a p -cyclic proximal contraction. Two types of such contractions (so called of type I and of type II are dealt with. In particular, the existence, uniqueness and limit properties for sequences to optimal fuzzy best proximity coincidence points are investigated for such pairs of mappings.

  19. Population Exposure Estimates in Proximity to Nuclear Power Plants, Locations

    Data.gov (United States)

    National Aeronautics and Space Administration — The Population Exposure Estimates in Proximity to Nuclear Power Plants, Locations data set combines information from a global data set developed by Declan Butler of...

  20. Transverse Stress Fracture of the Proximal Patella: A Case Report

    National Research Council Canada - National Science Library

    Atsumi, Satoru; Arai, Yuji; Kato, Ko; Nishimura, Akinobu; Nakazora, Shigeto; Nakagawa, Shuji; Ikoma, Kazuya; Fujiwara, Hiroyoshi; Sudo, Akihiro; Kubo, Toshikazu

    2016-01-01

    .... Regarding patella stress fractures, so far only distal transverse or lateral longitudinal fractures have been reported, but there are no reports of transverse fractures occurring in the proximal patella...

  1. Genetics Home Reference: proximal 18q deletion syndrome

    Science.gov (United States)

    ... can range from mild to severe. In particular, vocabulary and the production of speech (expressive language skills) ... Some affected individuals have an unusually large head size ( macrocephaly ). People with proximal 18q deletion syndrome often ...

  2. Perinatal mortality and residential proximity to an industrial park.

    Science.gov (United States)

    Sarov, Batia; Bentov, Yaakov; Kordysh, Ella; Karakis, Isabella; Bolotin, Arkady; Hershkovitz, Reli; Belmaker, Ilana

    2008-01-01

    The authors' objective was to determine whether residential proximity to an industrial park (IP) is associated with increased perinatal mortality (PM). This semiecological study included 63,850 delivered births with 840 cases of PM (1995-2000). The authors categorized the study populations by ethnicity (ie, Bedouin and Jewish) and type of locality. Residential distance from the IP served as a surrogate indicator of exposure. Among Bedouin newborns, proximity to the IP was associated with increased PM rates (relative risk = 1.45; 95% confidence interval = 1.22-1.72). The excess in PM was not related to maternal or newborn physical characteristics that the authors observed. The risk of PM and its components in the Jewish localities was not associated with IP proximity. The association between residential proximity to the IP and excess in PM among only Bedouin newborns may be related to vulnerability caused by the nomadic nature of the society.

  3. Computational proximity excursions in the topology of digital images

    CERN Document Server

    Peters, James F

    2016-01-01

    This book introduces computational proximity (CP) as an algorithmic approach to finding nonempty sets of points that are either close to each other or far apart. Typically in computational proximity, the book starts with some form of proximity space (topological space equipped with a proximity relation) that has an inherent geometry. In CP, two types of near sets are considered, namely, spatially near sets and descriptivelynear sets. It is shown that connectedness, boundedness, mesh nerves, convexity, shapes and shape theory are principal topics in the study of nearness and separation of physical aswell as abstract sets. CP has a hefty visual content. Applications of CP in computer vision, multimedia, brain activity, biology, social networks, and cosmology are included. The book has been derived from the lectures of the author in a graduate course on the topology of digital images taught over the past several years. Many of the students have provided important insights and valuable suggestions. The topics in ...

  4. Proximate and Amino Acid Composition of Celosia argentea Leaves ...

    African Journals Online (AJOL)

    % respectively while ... were analyzed using flame photometer for K and ... low in methionine. Table 1: Proximate Composition of C. argentea. Parameter. Composition (%). Moisture content. Crude Fat. Crude protein. Crude fibre. Ash. Nitrogen ...

  5. [A case of proximal type epithelioid sarcoma of the perineum].

    Science.gov (United States)

    Murashima, Takaya; Kamibeppu, Toyoharu; Hiromasa, Tukino; Mukai, Syoichiro; Kamoto, Toshiyuki

    2013-11-01

    Epithelioid sarcomas are rare soft tissue neoplasms which occur more often in young people. They tend to relapse, metastatize and show poor prognosis. Proximal-type epithelioid sarcomas arise from the more proximal part of body and are more malignant than distal-type epithelioid sarcomas. We present a case of proximal-type epithelioid sarcoma which occurred in the perineum. A 24-year-old male visited our hospital with the chief complaint of pain in the perineum. Computed tomography and magnetic resonance imaging showed a tumor 30×23×17 mm in diameter in the perineal region. The tumor was excised regionally and the pathological examination with immunohistochemical staining revealed that the tumor was proximal-type epithelioid sarcoma. The patient is free of recurrence and metastasis one year after local excision.

  6. Effect of processing method on the Proximate composition, mineral ...

    African Journals Online (AJOL)

    Effect of processing method on the Proximate composition, mineral content and antinutritional factors of Taro (Colocasia esculenta, L.) growth in Ethiopia. T Adane, A Shimelis, R Negussie, B Tilahun, GD Haki ...

  7. TETRAPOLIS - an exercise in building the complexities of proximity space

    National Research Council Canada - National Science Library

    Cristian Blidariu; Diana Giurea

    2017-01-01

    ... student’s intuitive ways for understanding these vicinities, their physical and symbolic proximities, through participatory tactics and certain poetic/architectural tools required in the phenomenological build-up of space...

  8. Orthopaedic approaches to proximal humeral fractures following trauma.

    OpenAIRE

    Mafi, R.; Khan, W.; Mafi, P; Hindocha, S.

    2014-01-01

    Proximal humeral fractures have been a topic of discussion in medical literature dating back as far as 3rd century BC. Today, these fractures are the most common type of humeral fractures and account for about 5-6% of all fractures in adults with the incidence rising rapidly with age. In broad terms the management of proximal humeral fractures can be divided into two categories: conservative versus surgical intervention. The aim of treatment is to stabilize the fracture, aid better union and ...

  9. Conservative Treatment for Bilateral Displaced Proximal Humerus Head Fracture

    OpenAIRE

    Rodriguez-Corlay, Ruy E; Velutini-Becker, Ricardo; Aguilar-Alcal?, Luis D

    2016-01-01

    Proximal humerus fracture represents five to eight percent of all fractures and is twice as common in women than in men. Most cases of displaced fracture of the proximal humerus are treated surgically; it is probable that more cases are preferred to be treated surgically greater than required. The optimal treatment for these fractures remains controversial, but physicians have a tendency to treat via open reduction and fixation with angular locking plates or glenohumeral arthroplasty.? We pre...

  10. Proximal and distal muscle fatigue differentially affect movement coordination

    OpenAIRE

    Cowley, Jeffrey C.; Gates, Deanna H.

    2017-01-01

    Muscle fatigue can cause people to change their movement patterns and these changes could contribute to acute or overuse injuries. However, these effects depend on which muscles are fatigued. The purpose of this study was to determine the differential effects of proximal and distal upper extremity muscle fatigue on repetitive movements. Fourteen subjects completed a repetitive ratcheting task before and after a fatigue protocol on separate days. The fatigue protocol either fatigued the proxim...

  11. Developing survey metrics for analysing cross-border proximity

    DEFF Research Database (Denmark)

    Makkonen, Teemu; Williams, Allan

    2017-01-01

    Cross-border innovation cooperation (CBIC) has been heralded as one of the corner stones of innovation-driven growth opportunities for firms located in cross-border regions (CBRs). The success of this cooperation is affected by varying types of proximities identified in the literature....... The findings indicate that the developed survey metrics are effective in depicting the phenomenon of proximity. The foundational work undertaken in this research note provides a platform, and catalyst, for more extensive investigations of the topic....

  12. Partial proximal trisomy 10q syndrome: a new case.

    Science.gov (United States)

    Nucaro, A; Faedda, A; Cao, A; Boccone, L

    2002-01-01

    We report a case of partial proximal trisomy of the long arm of chromosome 10 confirmed by fluorescence in situ hibridization (FISH) performed with whole chromosome 10 specific painting and specific yac clones. The phenotypic findings, compared to those found in other published cases with the same karyotype, support the recognition of a distinctive partial proximal trisomy 10q syndrome (10q11-->q22).

  13. Proximity functions for electrons up to 10 keV

    Energy Technology Data Exchange (ETDEWEB)

    Chmelevsky, D. (Institut fuer Medizinische Strahlenkunde der Universitaet Wuerzburg, Germany); Kellerer, A.M.; Terrissol, M.; Patau, J.P.

    1980-11-01

    Proximity functions for electrons up to 10 keV in water are computed from simulated particle tracks. Numerical results are given for the differential functions t(x) and the integral functions T(x). Basic characteristics of these functions and their connections to other microdosimetric quantities are considered. As an example of the applicability of the proximity functions, the quantity y/sub D/ for spheres is derived from t(x).

  14. Inexact proximal Newton methods for self-concordant functions

    DEFF Research Database (Denmark)

    Li, Jinchao; Andersen, Martin Skovgaard; Vandenberghe, Lieven

    2016-01-01

    We analyze the proximal Newton method for minimizing a sum of a self-concordant function and a convex function with an inexpensive proximal operator. We present new results on the global and local convergence of the method when inexact search directions are used. The method is illustrated...... matrices with chordal sparsity patterns are used to evaluate gradients and matrix-vector products with the Hessian of the smooth component of the objective....

  15. Critical Proximity as a Methodological Move in Techno-Anthropology

    OpenAIRE

    Birkbak, Andreas; Petersen, Morten Krogh; Elgaard Jensen, Torben

    2015-01-01

    echno-Anthropology is a new field, operating with a broad range of methodologies and approaches. This gives rise to the question: What does it mean for Techno-Anthropological research to be critical? In this paper, we discuss this question by developing and specifying the notion of ‘critical proximity.’ Critical proximity offers an alternative to critical distance, especially with respect to avoiding premature references to abstract panoramas such as democratization and capitalist exploitatio...

  16. Design and Clinical Application of Proximal Humerus Memory Connector

    Science.gov (United States)

    Xu, Shuo-Gui; Zhang, Chun-Cai

    2011-02-01

    Treatment for comminuted proximal humerus fractures and nonunions are a substantial challenge for orthopedic surgeons. Plate and screw fixation does not provide enough stability to allow patients to begin functional exercises early after surgery. Using shape memory material nickel titanium alloy, we designed a new device for treating severe comminuted proximal humerus fractures that accommodates for the anatomical features of the proximal humerus. Twenty-two cases of comminuted fracture, malunion, and nonunion of the proximal humerus were treated with the proximal humeral memory connector (PHMC). No external fixation was needed after the operation and patients began active shoulder exercises an average of 8 days after the operation. Follow-up evaluation (mean 18.5 months) revealed that bone healing with lamellar bone formation occurred an average of 3.6 months after surgery for the fracture cases and 4.5 months after surgery for the nonunion cases. Average shoulder function was 88.5 according to the criteria of Michael Reese. PHMC is an effective new device to treat comminuted proximal humerus fractures and nonunions. The use of this device may reduce the need for shoulder joint arthroplasty.

  17. The sooner, the better: exercise outcome proximity and intrinsic motivation.

    Science.gov (United States)

    Evans, M Blair; Cooke, Lisa M; Murray, Robyn A; Wilson, Anne E

    2014-11-01

    Despite evidence that outcomes are highly valued when they are expected sooner rather than further into the future (Ainslie, 1975), limited research effort has been devoted to understanding the role of exercise outcome proximity. The purpose of this study was to examine how temporal proximity to positive outcomes influences exercisers' intrinsic motivation. We expected that focusing people on temporally proximal exercise outcomes would increase intrinsic motivation, especially among low-frequency exercisers. This online experimental study was completed by 135 community exercisers (Mage  = 31.11, SD = 10.29; 62% female) who reported an average of 4.86 exercise bouts per week (SD = 2.12). Participants were randomly assigned to a condition that primed temporally proximal positive exercise outcomes (i.e. experienced during or directly following an exercise bout) or temporally distal outcomes (i.e. experienced after days, months, or years of regular exercise). Participants then reported perceptions of behavioral regulation in exercise. As expected, the proximal exercise outcome condition elicited increased intrinsic regulation among those participants who exercised less frequently (i.e. 1 SD below the mean). This study reveals the importance of considering proximity as an important dimension of exercise outcomes-particularly when promoting intrinsic motivation among relatively infrequent exercisers. © 2014 The International Association of Applied Psychology.

  18. Optical proximity correction: a first look at manufacturability

    Science.gov (United States)

    Liebmann, Lars W.; Grenon, Brian J.; Lavin, Mark A.; Schomody, Stephen; Zell, Thomas

    1994-12-01

    The feasibility of large scale optical proximity correction with a focus on mask manufacturability is demonstrated on the support and logic gates of a leading edge 64 Mb DRAM chip. Analysis of post reactive ion etch SEM data of the 500 - 600 nm, DUV exposed gates indicates two major contributors to across chip line width variation: first order proximity, that is, the minimum spacing to the nearest neighboring structure, and local area density or pattern loading. Data presented show a very long range (approximately equals 1 mm) impact of pattern density on post reactive ion etch line widths, favoring optical proximity correction approaches that are not based on biasing patterns to compensate for these effects. In this project, pattern density induced effects were alleviated by homogenizing the pattern loading across the chip to approximately 50% instead of biasing the gate structures to compensate for pattern density differences. Proximity induced effects were compensated for with a one- dimensional, single parameter (distance to nearest neighbor), four bucket proximity correction routine with a strong focus on mask manufacturability. Even though the unbiased 64 Mb DRAM gate level challenges mask makers with 480 MB of MEBES data, the optical proximity corrected mask posed no substantial post-processing, writing, or inspection problems in IBM's Burlington, Vermont maskhouse. A very significant 80% reduction in post reactive ion etch across chip line width variation was achieved with this corrected mask.

  19. Lactate oxidation by three segments of the rabbit proximal tubule

    Energy Technology Data Exchange (ETDEWEB)

    Brand, P.H.; Taylor, B.B.

    1986-09-01

    Oxidation of (U/sup 14/C)lactate to /sup 14/CO/sub 2/ was measured in vitro, in nonperfused anatomically defined segments of rabbit proximal tubule (S1, proximal convoluted, and S2 and S3, proximal straight tubules). The rate of lactate oxidation was similar in S2 and S3 segments, and within the range of lactate oxidation rates measured in vivo. In contrast, the oxidation rate of S1 segments was significantly lower than that of S2 or S3. In proximal straight tubules, lactate oxidation was inhibited by incubation at 0/sup 0/C, or by application of 1 mM ouabain. To determine if the rate of transepithelial transport affected the rate of lactate oxidation, lactate oxidation was measured in proximal straight tubules after the lumen had been opened by perfusion with Ringer's containing 10 mM polyethylene glycol. No difference in lactate oxidation rate was observed between tubules with patent lumina and nonperfused tubules. These results suggest that the various segments of the renal proximal tubule have difference metabolic characteristics, and that the rate of substrate oxidation is related to the activity of the Na/sup +/, K/sup +/-ATPase.

  20. Psychological responses to the proximity of climate change

    Science.gov (United States)

    Brügger, Adrian; Dessai, Suraje; Devine-Wright, Patrick; Morton, Thomas A.; Pidgeon, Nicholas F.

    2015-12-01

    A frequent suggestion to increase individuals' willingness to take action on climate change and to support relevant policies is to highlight its proximal consequences, that is, those that are close in space and time. But previous studies that have tested this proximizing approach have not revealed the expected positive effects on individual action and support for addressing climate change. We present three lines of psychological reasoning that provide compelling arguments as to why highlighting proximal impacts of climate change might not be as effective a way to increase individual mitigation and adaptation efforts as is often assumed. Our contextualization of the proximizing approach within established psychological research suggests that, depending on the particular theoretical perspective one takes on this issue, and on specific individual characteristics suggested by these perspectives, proximizing can bring about the intended positive effects, can have no (visible) effect or can even backfire. Thus, the effects of proximizing are much more complex than is commonly assumed. Revealing this complexity contributes to a refined theoretical understanding of the role that psychological distance plays in the context of climate change and opens up further avenues for future research and for interventions.

  1. The validity of proximal caries detection using magnifying visual aids.

    Science.gov (United States)

    Haak, Rainer; Wicht, Michael J; Hellmich, Martin; Gossmann, Andrea; Noack, Michael J

    2002-01-01

    The purpose of this study was to determine the validity of proximal caries detection supported by a prism loupe and a surgical microscope used by examiners having different professional experience. One hundred and sixty extracted premolars and molars with varying degrees of proximal caries or sound surfaces were embedded in 10 pairs of models with proximal tooth contacts and a simulated gingiva mask. The proximal surfaces were visually evaluated by 14 observers (7 students, 7 dentists) according to a 5-point caries rating scale using a head-worn prism loupe (x4.5), a surgical microscope (x 14) and without any magnifying device (control). The validity of observations was expressed as ROC curves calculated for two gold standard thresholds: (a) the presence of caries and (b) macroscopic cavitation. Repeated measures analysis of variance was used to determine the effects of 'observer group' and 'diagnostic modality'. An influence of the observer group could not be demonstrated (p > 0.72), whereas significant differences were revealed between the diagnostic modalities (p caries detection with magnifying aids were smaller compared to the control group. It was concluded that the use of a prism loupe or a surgical microscope does not improve the validity of proximal caries detection if the operators, irrespective of being dental students or clinical instructors, are inexperienced in its utilisation. In general only moderate validity was achieved with visual inspection of proximal sites. Copyright 2002 S. Karger AG, Basel

  2. [Long-term consequences of resection of 1/3 proximal epiphysis of child's right tibia--a case study].

    Science.gov (United States)

    Duda, Sławomir; Jasiewicz, Barbara; Potaczek, Tomasz; Tęsiorowski, Maciej

    2015-01-01

    Authors report a case of a patient with varus deformity of right knee, caused by wide resection of proximal metaphysis and epiphysis of right tibia. Afore mentioned procedure led to loss of right knee joint integrity, with its lateral instability, shortening, and axis deviation of right tibia. Surgical treatment of this complications was performed in several stages and took about 5 years, starting from temporal, lateral hemiepiphysiodesis of proximal tibial epiphysis, subacute epiphysiolysis of proximal tibial epiphysis and high valgus tibia osteotomy, at the end finished with medial tibia condyle reconstruction with autogenic graft and osteoconductive substances. The proper mechanical and anatomical axis of the right limb, with full stability and movement of right knee was achieved after those surgeries. The process of treatment of lower extremity axis deviation takes long time, frequently involves several surgeries and needs firm cooperation between doctor and patient.

  3. Proximity strategies in outsourcing relations: the role of geographical, cultural and relational proximity in the European automotive industry

    OpenAIRE

    Schmitt, Alexander; Van Biesebroeck, Jo

    2013-01-01

    Several trends that affect the manufacturing of sophisticated goods - increasing international fragmentation of production, and lean and modular process technologies - have increased the importance of proximity in the supply chain. We use the case of the European automotive industry to simultaneously evaluate the relative importance of three dimensions: geographical, cultural, and relational proximity. Using a rich and novel data set, we find that carmakers value some aspects of each dimensio...

  4. Proximal tibiofibular joint: Rendezvous with a forgotten articulation

    Directory of Open Access Journals (Sweden)

    Amitav Sarma

    2015-01-01

    Full Text Available The proximal tibiofibular joint (PTFJ is a plane type synovial joint. The primary function of the PTFJ is dissipation of torsional stresses applied at the ankle and the lateral tibial bending moments besides a very significant tensile, rather than compressive weight bearing. Though rare, early diagnosis and treatment of the PTFJ dislocation are essential to prevent chronic joint instability and extensive surgical intervention to restore normal PTFJ biomechanics, ankle and knee function, especially in athletes prone to such injuries. PTFJ dislocations often remain undiagnosed in polytrauma scenario with ipsilateral tibial fracture due to the absence of specific signs and symptoms of PTFJ injury. Standard orthopedic textbooks generally describe no specific tests or radiological signs for assessment of the integrity of this joint. The aim of this paper was to review the relevant clinical anatomy, biomechanics and traumatic pathology of PTFJ with its effect on the knee emphasizing the importance of early diagnosis through a high index of suspicion. Dislocation of the joint may have serious implications for the knee joint stability since fibular collateral ligament and posterolateral ligament complex is attached to the upper end of the fibula. Any high energy knee injury with peroneal nerve palsy should immediately raise the suspicion of PTFJ dislocation especially if the mechanism of injury involved knee twisting in flexion beyond 80° and in such cases a comparative radiograph of the contralateral side should be performed. Wider clinical awareness can avoid both embarrassingly extensive surgeries due to diagnostic delays or unnecessary overtreatment due to misinformation on the part of the treating surgeon.

  5. Ion-stimulated Gas Desorption Yields of Electropolished, Chemically Etched, and Coated (Au, Ag, Pd, TiZrV) Stainless Steel Vacuum Chambers and St707 Getter Strips Irradiated with 4.2 MeV/u lead ions

    CERN Document Server

    Mahner, E; Küchler, D; Malabaila, M; Taborelli, M

    2005-01-01

    The ion-induced desorption experiment, installed in the CERN Heavy Ion Accelerator LINAC 3, has been used to measure molecular desorption yields for 4.2 MeV/u lead ions impacting under grazing incidence on different accelerator-type vacuum chambers. Desorption yields for H2, CH4, CO, and CO2, which are of fundamental interest for future accelerator applications, are reported for different stainless steel surface treatments. In order to study the effect of the surface oxide layer on the gas desorption, gold-, silver-, palladium-, and getter-coated 316 LN stainless steel chambers and similarly prepared samples were tested for desorption at LINAC 3 and analysed for chemical composition by X-ray Photoemission Spectroscopy (XPS). The large effective desorption yield of 2 x 104 molecules/Pb53+ ion, previously measured for uncoated, vacuum fired stainless steel, was reduced after noble-metal coating by up to 2 orders of magnitude. In addition, pressure rise measurements, the effectiveness of beam scrubbing with le...

  6. Promoter proximal polyadenylation sites reduce transcription activity

    DEFF Research Database (Denmark)

    Andersen, Pia Kjølhede; Lykke-Andersen, Søren; Jensen, Torben Heick

    2012-01-01

    Gene expression relies on the functional communication between mRNA processing and transcription. We previously described the negative impact of a point-mutated splice donor (SD) site on transcription. Here we demonstrate that this mutation activates an upstream cryptic polyadenylation (CpA) site......, which in turn causes reduced transcription. Functional depletion of U1 snRNP in the context of the wild-type SD triggers the same CpA event accompanied by decreased RNA levels. Thus, in accordance with recent findings, U1 snRNP can shield premature pA sites. The negative impact of unshielded pA sites...... RNA polymerase II-transcribed genes use specialized termination mechanisms to maintain high transcription levels....

  7. Regionalization of municipal solid waste management in Japan: balancing the proximity principle with economic efficiency.

    Science.gov (United States)

    Okuda, Itaru; Thomson, Vivian E

    2007-07-01

    The proximity principle - disposing of waste close to its origin - has been a central value in municipal solid waste (MSW) management in Japan for the last 30 years and its widespread adoption has helped resolve numerous "Not in My Backyard" issues related to MSW management. However, MSW management costs have soared, in large part because of aggressive recycling efforts and because most MSW is incinerated in a country that has scarce landfill capacity. In addition, smaller, less sophisticated incinerators have been closed because of high dioxin emissions. Rising costs combined with the closure of smaller incinerators have shifted MSW management policy toward regionalization, which is the sharing of waste management facilities across municipalities. Despite the increased use of regionalized MSW facilities, the proximity principle remains the central value in Japanese MSW management. Municipal solid waste management has become increasingly regionalized in the United States, too, but different driving forces are at work in these two countries. The transition to regionalized MSW management in Japan results from strong governmental control at all levels, with the central government providing funds and policy direction and prefectures and municipalities being the primary implementing authorities. By contrast, market forces are a much stronger force with US MSW management, where local governments - with state government oversight - have primary responsibility for MSW management. We describe recent changes in Japan's MSW programs. We examine the connections between MSW facility regionalization, on the one hand, and, on the other hand, the proximity principle, coordination among local governments, central government control, and financing mechanisms.

  8. What is the Optimal Reconstruction Option after the Resection of Proximal Humeral Tumors? A Systematic Review.

    Science.gov (United States)

    Dubina, Andrew; Shiu, Brian; Gilotra, Mohit; Hasan, S Ashfaq; Lerman, Daniel; Ng, Vincent Y

    2017-01-01

    The proximal humerus is a common location for both primary and metastatic bone tumors. There are numerous reconstruction options after surgical resection. There is no consensus on the ideal method of reconstruction. A systematic review was performed with a focus on the surgical reconstructive options for lesions involving the proximal humerus. A total of 50 articles and 1227 patients were included for analysis. Reoperation rates were autograft arthrodesis (11%), megaprosthesis (10%), RSA (17%), hemiarthroplasty (26%), and osteoarticular allograft (34%). Mechanical failure rates, including prosthetic loosening, fracture, and dislocation, were highest in allograft-containing constructs (APC, osteoarticular allograft, arthrodesis) followed by arthroplasty (hemiarthroplasty, RSA, megaprosthesis) and lowest for autografts (vascularized fibula, autograft arthrodesis). Infections involving RSA (9%) were higher than hemiarthroplasty (0%) and megaprosthesis (4%). Postoperative function as measured by MSTS score were similar amongst all prosthetic options, ranging from 66% to 74%, and claviculo pro humeri (CPH) was slightly better (83%). Patients were generally limited to active abduction of approximately 45° and no greater than 90°. With resection of the rotator cuff, deltoid muscle or axillary nerve, function and stability were compromised even further. If the rotator cuff was sacrificed but the deltoid and axillary nerve preserved, active forward flexion and abduction were superior with RSA. Various reconstruction techniques for the proximal humerus lead to relatively similar functional results. Surgical choice should be tailored to anatomic defect and functional requirements.

  9. Allograft-prosthetic composite versus megaprosthesis in the proximal tibia-What works best?

    Science.gov (United States)

    Müller, Daniel A; Beltrami, Giovanni; Scoccianti, Guido; Cuomo, Pierluigi; Capanna, Rodolfo

    2016-10-01

    Modular megaprosthesis (MP) and allograft-prosthetic composite (APC) are the most commonly used reconstructions for large bone defects of the proximal tibia. The primary objective of this study was to compare the two different techniques in terms of failures and functional results. A total of 42 consecutive patients with a mean age of 39.6 years (range 15-81 years) who underwent a reconstruction of the proximal tibia between 2001 and 2012 were included. Twenty-three patients were given an MP, and 19 patients received an APC. There were nine reconstruction failures after an average follow-up of 62 months: five in the MP group and four in the APC group (p=0.957). The 10-year implant survival rate was 78.8% for the MP and 93.7% for the APC (p=0.224). There were no relevant differences between the two groups in functional results. Both MP and APC are valid and satisfactory reconstructive options for massive bone defects in the proximal tibia. In high-demanding patients with no further risk factors, an APC should be considered to provide the best possible functional result for the extensor mechanism. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Distinct gene expression profiles of proximal and distal colorectal cancer: implications for cytotoxic and targeted therapy.

    Science.gov (United States)

    Maus, M K H; Hanna, D L; Stephens, C L; Astrow, S H; Yang, D; Grimminger, P P; Loupakis, F; Hsiang, J H; Zeger, G; Wakatsuki, T; Barzi, A; Lenz, H-J

    2015-08-01

    Colorectal cancer (CRC) is a heterogeneous disease with genetic profiles and clinical outcomes dependent on the anatomic location of the primary tumor. How location has an impact on the molecular makeup of a tumor and how prognostic and predictive biomarkers differ between proximal versus distal colon cancers is not well established. We investigated the associations between tumor location, KRAS and BRAF mutation status, and the messenger RNA (mRNA) expression of proteins involved in major signaling pathways, including tumor growth (epidermal growth factor receptor (EGFR)), angiogenesis (vascular endothelial growth factor receptor 2 (VEGFR2)), DNA repair (excision repair cross complement group 1 (ERCC1)) and fluoropyrimidine metabolism (thymidylate synthase (TS)). Formalin-fixed paraffin-embedded tumor specimens from 431 advanced CRC patients were analyzed. The presence of seven different KRAS base substitutions and the BRAF V600E mutation was determined. ERCC1, TS, EGFR and VEGFR2 mRNA expression levels were detected by reverse transcriptase-PCR. BRAF mutations were significantly more common in the proximal colon (Pexpression in multivariate analysis. In a subgroup analysis, this association remained significant for all genes in the proximal colon and for VEGFR2 expression in rectal cancers. The mRNA expression patterns of predictive and prognostic biomarkers, as well as associations with KRAS and BRAF mutation status depend on primary tumor location. Prospective studies are warranted to confirm these findings and determine the underlying mechanisms.

  11. Effect of aluminized fabrics on radiant protective performance of fire proximity suit materials.

    Science.gov (United States)

    Jin, Lu; Park, Pyoung Kyu; Hong, Kyoung A; Yoon, Kee Jong

    2015-03-01

    Radiant heat may be a significant component of heat exposure in the case of proximity firefighting. To combat high levels of radiant heat, fire proximity suits made of aluminized fabrics (Al-Fb) are commonly used due to their proven radiant protective performance (RPP). In this study RPP of various Al-Fb prepared using different aluminized films (Al-Fl) such as double-sided aluminized film and single-sided aluminized film and different base fabrics such as woven, knit, and nonwoven fabrics are compared. The effect of flexing on RPP and flame protective performance (FPP) of Al-Fb is also examined. The results show that RPP of Al-Fl is affected by the protective film to protect against mechanical or physical damages, and also by their structure such as whether the second reflective aluminum layer is present or not. In addition RPP of Al-Fb is also influenced by the base fabric, especially its surface roughness. The increased surface roughness combined with the damage caused to the aluminum layer after flexing result in reduction of RPP of Al-Fb. The contribution of Al-Fl to FPP of Al-Fb is not as significant as to RPP. Finally, based on the results, some points that may be important in developing and designing fire proximity suits are recommended. © The Author 2014. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

  12. Influence of Early Bisphosphonate Administration for Fracture Healing in Patients with Osteoporotic Proximal Humerus Fractures.

    Science.gov (United States)

    Seo, Joong-Bae; Yoo, Jae-Sung; Ryu, Jee-Won; Yu, Kun-Woong

    2016-12-01

    Bisphosphonates are generally known to adversely affect fracture healing because they inhibit osteoclastic bone resorption. However, some authors argue that bisphosphonates have no adverse effect on the restoration of the mechanical integrity of long bones after fractures. It is unclear whether bisphosphonates can be initiated safely in patients with acute proximal humerus fractures. The aim of this study was to determine whether the early use of a bisphosphonate affects healing and outcomes of osteoporotic proximal humerus fractures treated with a locking compression plate. Between August 2004 and June 2013, a total of 82 osteoporotic patients who underwent locking plate fixation of proximal humerus fractures were enrolled retrospectively. The patients were divided into two groups according to the timing of the commencement of treatment with alendronate after surgery: group A (n = 34, initiation of the bisphosphonate treatment within two weeks after surgery) and group B (n = 48, control group, initiation of the treatment three months after surgery). Patients were assessed for radiographic union at 2, 6, 10, and 16 weeks, 6 months, and 1 year after surgery. Clinical assessments were performed using the Constant score and American Shoulder and Elbow Surgeons (ASES) score at 1 year after surgery. No significant differences were observed between the two groups with respect to radiographic and clinical outcomes after locking plate fixation. All patients obtained fracture union, and the mean time to radiographic union was similar in group A and group B (6.3 and 6.6 weeks, respectively; p = 0.67). This study shows that the early initiation of bisphosphonate treatment does not affect bone union or clinical outcomes in patients with an osteoporotic proximal humerus fracture treated by locking compression plate fixation.

  13. Functional outcome of closed fractures of proximal humerus managed by Joshi′s external stabilizing system

    Directory of Open Access Journals (Sweden)

    Anil Kumar Gupta

    2012-01-01

    Full Text Available Background: Proximal humeral fractures account for 4-5% of all fractures; most of them involving elderly and osteoporotic people. 1 51% of such fractures are displaced. Two Fractures with minimal displacement, regardless of the number of fracture lines, can be treated with closed reduction and early mobilization, but anatomical reduction in displaced fractures is difficult to obtain and the incidence of pseudarthrosis is high 3-5. We evaluated the functional results of closed Neer′s 2- and 3-part proximal humerus fractures treated by Joshi′s external stabilizing system. Materials and Methods: Sixteen patients with proximal humeral fractures were managed from 2008 to 2010 by Joshi′s stabilizing external fixation. They were 10 males and 6 females, with a mean age of 57.5 years. Based on Neer′s classification, there were eleven 3-part fractures and five 2-part fractures. The mechanism of injuries included seven road traffic accidents and nine fall. Shoulder mobilization exercises were started within 1 week after stabilization with JESS. External fixation was removed after the evidence of union (6-8 weeks. Pain was evaluated by visual analogue scale (VAS and shoulder range of motion was evaluated by Constant Scoring System. Followup was done at 4 weeks, 8 weeks, 12 weeks, and then at every 4 weeks. Results: Mean followup was of 20.5 months (range 9-30 months. Postoperative mean VAS score and Constant Score of patients was 2.1 (±0.73 and 78.1 (±9.61 at an average followup of 6 months. Mean duration for union was 6.5 (±1.18 weeks. One case of K-wire loosening and one case of pin tract infection were the complications noted. Conclusion: External fixation by JESS is an alternative option to treat Neer′s 2 and 3 part proximal humerus fractures with good results.

  14. Early effects of uranyl nitrate on respiration and K sup + transport in rabbit proximal tubule

    Energy Technology Data Exchange (ETDEWEB)

    Brady, H.R.; Kone, B.C.; Brenner, R.M.; Gullans, S.R. (Brigham and Women' s Hospital, Boston, MA (USA))

    1989-07-01

    The mechanisms by which uranyl nitrate (UN) is toxic to the proximal tubule are incompletely understood. To define these further we studied potassium (K+) transport and oxygen consumption (QO2) in rabbit proximal tubule suspensions in vitro immediately after exposure to UN using extracellular O2- and K+-sensitive electrodes. UN caused a cumulative dose-dependent inhibition of proximal tubule QO2, with a threshold concentration of 5 x 10(-5) M. Kinetic analysis suggested two patterns of cell injury: a higher affinity inhibition of QO2 with a Ki of 5 x 10(-4) M, and a lower affinity inhibition of QO2 with a Ki of 10 mM. QO2 was studied in detail in the presence of these Ki concentrations of UN to define the initial cellular events. The results indicated that different cellular processes displayed different sensitivities to UN. At submillimolar concentrations UN caused progressive selective inhibition of ouabain-insensitive QO2 (15% inhibition at 2 minutes). Ouabain-sensitive QO2 and nystatin-stimulated QO2 were not affected, suggesting that Na+,K+-ATPase activity and its coupling to mitochondrial ATP synthesis were intact. Direct measurement of proximal tubule net K+ flux confirmed that Na+,K+-ATPase activity was unchanged. Similarly, UN did not inhibit basal (state 4) or ADP-stimulated (state 3) mitochondrial QO2 in digitonin-permeabilized tubules, confirming that the mitochondria were intact. In contrast, higher concentrations of UN (greater than or equal to 1 mM) caused rapid inhibition of QO2 and net K+ efflux, due to inhibition of Na+,K+-ATPase activity and mitochondrial injury.

  15. Does proximity to violence negatively influence attitudes toward exception from informed consent in emergency research?

    Science.gov (United States)

    Maher, Zoë; Grill, Elena Kosar; Smith, Brian Patrick; Sims, Carrie A

    2015-09-01

    Trauma research has been limited by perceived patient reluctance to participate in exception from informed consent (EFIC) studies. We hypothesized that race, socioeconomic status, and proximity to violence influence willingness to participate in and perception of EFIC research among at-risk populations. Trauma patients, families, and community members ranked statements regarding attitude toward EFIC in the context of an upcoming trial and willingness to participate in emergency research using a 5-point Likert scale during a community consultation. Higher total scores reflected a more positive attitude regarding EFIC (range, 6-30; neutral, 18) and willingness (range, 23-115; neutral, 69). Subject zip code was used to calculate median income, as an estimate for socioeconomic status, and proximity to the five most violent city zip codes. Linear regression, Spearman's correlation, and Kruskal-Wallis tests (p attitudes toward EFIC. A total of 179 subjects participated including trauma patients (n = 99), families (n = 33), and community members (n = 47). Overall, participants were supportive of EFIC and reported high scores in willingness to participate (median, 24; interquartile range, 21-25; median 89, interquartile range, 82-95, respectively). Proximity to violence did correlate with race (p = 0.03) but was not associated with violent mechanism of injury, perception of EFIC, or willingness to participate in emergency research. Estimated socioeconomic status and race did not correlate with perception of or willingness to participate in EFIC. Based on our data, there is no correlation between either proximity to violence or estimated socioeconomic status and willingness to participate in EFIC research. Given this lack of correlation, researchers should partner with at-risk communities to conduct EFIC studies without concern for limited participation. Epidemiologic/prognostic study, level III.

  16. Are flexible flat feet associated with proximal joint problems in children?

    Science.gov (United States)

    Kothari, A; Dixon, P C; Stebbins, J; Zavatsky, A B; Theologis, T

    2016-03-01

    The role of flexible flat feet (FF) in the development of musculoskeletal symptoms at joints proximal to the ankle is unclear. We undertook an observational study to investigate the relationship between foot posture and the proximal joints in children. It was hypothesised that reduced arch height would be associated with proximal joint symptoms and altered gait kinematics and kinetics particularly in the transverse plane at the hip and knee. Ninety-five children between the ages of 8-15 were recruited into this ethically approved study. Foot posture was classified using the arch height index (AHI). The frequency of knee and hip/back pain was documented, and each child underwent three dimensional gait analysis. Reduced arch height was associated with increased odds of knee symptoms (p<0.01) and hip/back symptoms (p=0.01). A flat foot posture was also significantly associated with a reduction in the second peak of the vertical ground reaction force (p=0.03), which concomitantly affected late stance hip and knee moments. A reduced AHI was also associated with increased pelvic retraction and increased knee valgus in midstance. No kinematic and kinetic parameter associated with a flat foot posture related to increased proximal joint symptoms in the FF group. Children with a flatter foot posture are more likely to have pain or discomfort at the knee, hip and back; however, the mechanisms by which this occurs remain unclear. Treating FF without explicit understanding of how it relates to symptoms is difficult, and further work in this area is required. Copyright © 2016 Elsevier B.V. All rights reserved.

  17. Minimally invasive plate osteosynthesis for proximal humeral fractures.

    Science.gov (United States)

    Koljonen, Paul Aarne; Fang, Christian; Lau, Tak Wing; Leung, Frankie; Cheung, Nigel W K

    2015-08-01

    To report the outcome after minimally invasive plate osteosynthesis (MIPO) through the deltoid-splitting approach for proximal humeral fractures. 10 men and 30 women aged 37 to 88 years underwent MIPO through the deltoid-splitting approach using the Proximal Humerus Internal Locking System or the Locking Proximal Humerus Plate for 2-part (n=18), 3-part (n=20), and 4-part (n=2) proximal humeral fractures. The rehabilitation protocol was standardised. All 40 patients were followed up at 3 months, 34 (85%) at 6 months, 30 (75%) at one year, and 13 (33%) at 2 years. Two patients had malunion. No patient had avascular necrosis, infection, nerve palsy, or nonunion. The mean Constant score at one year and 2 years was 75 and 87.5, respectively. The Constant score at 6 months correlated to that at one year (r=0.926, pfracture grade, or hand dominance. MIPO for fixation of proximal humeral fractures using a locking plate is safe and effective in enabling an early return of shoulder function.

  18. The Applications of Finite Element Analysis in Proximal Humeral Fractures

    Science.gov (United States)

    Ye, Yongyu; You, Wei; Zhu, Weimin; Cui, Jiaming; Chen, Kang

    2017-01-01

    Proximal humeral fractures are common and most challenging, due to the complexity of the glenohumeral joint, especially in the geriatric population with impacted fractures, that the development of implants continues because currently the problems with their fixation are not solved. Pre-, intra-, and postoperative assessments are crucial in management of those patients. Finite element analysis, as one of the valuable tools, has been implemented as an effective and noninvasive method to analyze proximal humeral fractures, providing solid evidence for management of troublesome patients. However, no review article about the applications and effects of finite element analysis in assessing proximal humeral fractures has been reported yet. This review article summarized the applications, contribution, and clinical significance of finite element analysis in assessing proximal humeral fractures. Furthermore, the limitations of finite element analysis, the difficulties of more realistic simulation, and the validation and also the creation of validated FE models were discussed. We concluded that although some advancements in proximal humeral fractures researches have been made by using finite element analysis, utility of this powerful tool for routine clinical management and adequate simulation requires more state-of-the-art studies to provide evidence and bases. PMID:29081829

  19. The Applications of Finite Element Analysis in Proximal Humeral Fractures

    Directory of Open Access Journals (Sweden)

    Yongyu Ye

    2017-01-01

    Full Text Available Proximal humeral fractures are common and most challenging, due to the complexity of the glenohumeral joint, especially in the geriatric population with impacted fractures, that the development of implants continues because currently the problems with their fixation are not solved. Pre-, intra-, and postoperative assessments are crucial in management of those patients. Finite element analysis, as one of the valuable tools, has been implemented as an effective and noninvasive method to analyze proximal humeral fractures, providing solid evidence for management of troublesome patients. However, no review article about the applications and effects of finite element analysis in assessing proximal humeral fractures has been reported yet. This review article summarized the applications, contribution, and clinical significance of finite element analysis in assessing proximal humeral fractures. Furthermore, the limitations of finite element analysis, the difficulties of more realistic simulation, and the validation and also the creation of validated FE models were discussed. We concluded that although some advancements in proximal humeral fractures researches have been made by using finite element analysis, utility of this powerful tool for routine clinical management and adequate simulation requires more state-of-the-art studies to provide evidence and bases.

  20. Intramedullary Nailing for Pathological Fractures of the Proximal Humerus.

    Science.gov (United States)

    Choi, Eun-Seok; Han, Ilkyu; Cho, Hwan Seong; Park, In Woong; Park, Jong Woong; Kim, Han-Soo

    2016-12-01

    Endoprosthetic reconstruction is widely applied for pathological fractures of the proximal humerus; however, functional impairment is usually unsatisfactory. The aims of the current study are to evaluate the reliability of interlocking intramedullary (IM) nailing with cement augmentation as a fixation method in proximal humeral lesions and to assess functional outcomes. We reviewed 32 patients with pathological fractures of the proximal humerus who underwent interlocking IM nailing and cement augmentation. Functional scores and pain relief were assessed as outcomes. The mean follow-up period was 14.2 months. The mean Musculoskeletal Tumor Society functional score and Karnofsky performance status scale score were 27.7 and 75.6, respectively. Improvement of pain assessed using the visual analogue scale was 6.2 on average. Thirty-one patients (97%) experienced no pain after surgery. The mean ranges of forward flexion and abduction were 115° and 112.6°, respectively. All patients achieved stability and had no local recurrence without failure of fixation until the last follow-up. Proximal interlocking IM nailing with cement augmentation appears to be a reliable treatment option for pathological or impending fractures of the proximal humerus in selected patients with metastatic tumors, even with extensive bone destruction.

  1. FUNCTIONAL OUTCOME OF PHILOS PLATE FIXATION FOR PROXIMAL HUMERUS FRACTURES

    Directory of Open Access Journals (Sweden)

    Ch. Venkateswarlu

    2016-01-01

    Full Text Available INTRODUCTION Treating a proximal humerus fracture remained a challenging problem until proximal humeral internal locking system has been developed. Our study aims at evaluating the functional outcome of 30 consecutive patients with proximal humeral fracture treated by Philos plate fixation; 30 patients with proximal humeral fractures who attended our hospital between December 2013 and December 2015 were included in the study; 18 women and 12 men with a mean age of 47.5years (30-60 years are included. Data was collected prospectively and outcomes were assessed using constant shoulder score. The mean follow-up period was 12 months (6-18 months. Mean union time of all the fractures was 11.4 weeks (8-20 weeks. The mean constant shoulder score at final review was 70.5 (52-92. Philos plate provides stable fracture fixation for proximal humerus fracture in both young and elderly patients, which enables for early mobilisation and achieves acceptable functional results.

  2. Topology of digital images visual pattern discovery in proximity spaces

    CERN Document Server

    Peters, James F

    2014-01-01

    This book carries forward recent work on visual patterns and structures in digital images and introduces a near set-based a topology of digital images. Visual patterns arise naturally in digital images viewed as sets of non-abstract points endowed with some form of proximity (nearness) relation. Proximity relations make it possible to construct uniform topolo- gies on the sets of points that constitute a digital image. In keeping with an interest in gaining an understanding of digital images themselves as a rich source of patterns, this book introduces the basics of digital images from a computer vision perspective. In parallel with a computer vision perspective on digital images, this book also introduces the basics of prox- imity spaces. Not only the traditional view of spatial proximity relations but also the more recent descriptive proximity relations are considered. The beauty of the descriptive proximity approach is that it is possible to discover visual set patterns among sets that are non-overlapping ...

  3. Results of the proximal humerus endoprosthetic reconstruction after tumour resection

    Directory of Open Access Journals (Sweden)

    I. M. Mikailov

    2014-01-01

    Full Text Available The purpose of the study was to evaluate the results of surgical reconstructions of the proximal humerus after transarticular tumour resection, compare the functional results with the results of shoulder arthroplasty in patients with extensive damage of the proximal humerus of non-neoplastic origin. Material and methods. Between 2001 and 2013 38 proximal humeral reconstructions were performed in our clinic: using monopolar endoprostheses - 26 (68% and modular systems with reversible head -12 (32%. The control group included 46 patients with extensive lesions of the proximal humerus of non-neoplastic origin, operated in our clinic in the period from 2006 to 2012. Term follow-up of patients ranged from 7 months to 9 years. Assessment of functional results was carried out in a period from six months to one year. Results. The seven-year survival according the Kaplan - Meier method for patients with primary malignant tumors of the proximal humerus (25 patients was 77%. In the study group the average value of functional outcome MSTS score was 77.7%. Unipolar prosthesis showed a bad result, both in the control (61,3% MSTS, 60,7 Neer and in the main (67,7% MSTS, 61,1 Neer study groups. Conclusion. Currently the method of choice which doesn’t impair the oncologic component of treatment patients with shoulder neoplastic lesions is its replacement with modular reversible systems in combination with additional soft tissue fixation.

  4. Clinical applicability of resin infiltration for proximal caries.

    Science.gov (United States)

    Altarabulsi, Mohammad Basel; Alkilzy, Mohammad; Splieth, Christian H

    2013-02-01

    Resin infiltration is a new microinvasive treatment to arrest the progress of proximal initial caries lesions. This study evaluated the clinical applicability of proximal caries infiltration. In the study population of 50 children, adolescents, and young adults (mean age, 17.3 ± 6.4 years), 10 dentists at the University of Greifswald, Greifswald, Germany, applied the infiltration material Icon on noncavitated proximal lesions in permanent and primary teeth as described by the manufacturer. The applicability was evaluated using two questionnaires filled out by clinicians and patients assessing the comfort, complexity, time, and difficulties of the application in comparison to a filling. The results showed good patient satisfaction with the procedure. The mean time for infiltration (24.3 ± 7.4 minutes), which included rubber dam application (7.7 ± 4 minutes) and the effort were perceived to be comparable to or even easier than a composite filling by clinicians. In three patients (6%), it was not possible to gain sufficient proximal space for the application of an infiltration. The location of the infiltrated tooth, separation problems, and the routine of clinicians with the infiltration technique had an effect on the duration of the infiltration. A clear learning curve with a reduction of treatment time for subsequent treatments was observed (P proximal lesion showed good clinical applicability for clinicians and very high acceptance by patients.

  5. Effects of phospho- and calciotropic hormones on electrolyte transport in the proximal tubule [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Justin J. Lee

    2017-10-01

    Full Text Available Calcium and phosphate are critical for a myriad of physiological and cellular processes within the organism. Consequently, plasma levels of calcium and phosphate are tightly regulated. This occurs through the combined effects of the phospho- and calciotropic hormones, parathyroid hormone (PTH, active vitamin D3, and fibroblast growth factor 23 (FGF23. The organs central to this are the kidneys, intestine, and bone. In the kidney, the proximal tubule reabsorbs the majority of filtered calcium and phosphate, which amounts to more than 60% and 90%, respectively. The basic molecular mechanisms responsible for phosphate reclamation are well described, and emerging work is delineating the molecular identity of the paracellular shunt wherein calcium permeates the proximal tubular epithelium. Significant experimental work has delineated the molecular effects of PTH and FGF23 on these processes as well as their regulation of active vitamin D3 synthesis in this nephron segment. The integrative effects of both phospho- and calciotropic hormones on proximal tubular solute transport and subsequently whole body calcium-phosphate balance thus have been further complicated. Here, we first review the molecular mechanisms of calcium and phosphate reabsorption from the proximal tubule and how they are influenced by the phospho- and calciotropic hormones acting on this segment and then consider the implications on both renal calcium and phosphate handling as well as whole body mineral balance.

  6. Results of the proximal femoral nail anti-rotation (PFNA) in elderly Chinese patients

    OpenAIRE

    Pu, Jin-Song; Liu, Lei; Wang, Guang-lin; Fang, Yue; Yang, Tian-Fu

    2009-01-01

    A prospective study is presented of 87 unstable intertrochanteric fractures treated with the proximal femoral nail anti-rotation (PFNA) with a follow-up of one year. Of the patients 76% were female. The average age was 75.3 years. The fracture was treated by closed reduction and intramedullary fixation. Pre-injury activity level was recovered in 77% of the patients. Fractures united in all patients. Mechanical failure and cut-out were not observed. A technical problem related to the mismatch ...

  7. On determinants of glomerular filtration rate after inhibition of proximal tubular reabsorption

    DEFF Research Database (Denmark)

    Leyssac, P P; Karlsen, F M; Holstein-Rathlou, N H

    1994-01-01

    The carbonic anhydrase inhibitor acetazolamide (ACZ) inhibits the absolute rate of proximal reabsorption (APR), causes a reduction in glomerular filtration rate (GFR), and activates the tubuloglomerular feedback mechanism (TGF) resulting in afferent vasoconstriction. The quantitative importance...... vasoconstriction seen after carbonic anhydrase inhibition fails to restore GFR to its control value. This is due to the high flow resistance in the distal nephron segments during the increased tubular flow rates seen after ACZ. The high distal flow resistance causes a parallel change in Pgc and Pprox and thus...

  8. The Proximity Cryogenic System for the ATLAS Toroidal Magnets

    CERN Document Server

    Baynham, D Elwyn; Brown, G; Cragg, D; Crook, M; Haug, F; Mayri, C; Orlowska, A H; Passardi, Giorgio; Pengo, R; ten Kate, H H J; Rochford, J; Sole, D

    2002-01-01

    ATLAS is a very high-energy detector for the Large Hadron Collider (LHC) at CERN. The superconducting magnet used to provide the required magnetic field consists of four sub-systems: a central solenoid and a very large toroidal magnet comprising two end-cap magnets and the barrel toroid magnet. The associated cryogenic system, currently in the final specification and procurement phase has been sub-divided into three parts: internal, proximity and external. The internal cryogenics minimizes and extracts the heat loads to/from the 4.5 K cold mass and its thermal shields, while the proximity cryogenics takes the cooling capacity generated by the external common system and distributes it to the four magnets according to the various operating scenarios. Two independent proximity cryogenic systems have been designed taking into account the difference in cooling principle of the solenoid and the three toroids, respectively.

  9. The proximity cryogenic system for the ATLAS toroidal magnets

    Science.gov (United States)

    Haug, F.; Passardi, G.; Pengo, R.; ten Kate, H.; Baynham, E.; Bradshaw, T.; Brown, G.; Cragg, D.; Crook, M.; Orlowska, A. H.; Rochford, J.; Sole, D.; Mayri, C.

    2002-05-01

    ATLAS is a very high-energy detector for the Large Hadron Collider (LHC) at CERN. The superconducting magnet used to provide the required magnetic field consists of four sub-systems: a central solenoid and a very large toroidal magnet comprising two end-cap magnets and the barrel toroid magnet. The associated cryogenic system, currently in the final specification and procurement phase has been sub-divided into three parts: internal, proximity and external. The internal cryogenics minimizes and extracts the heat loads to/from the 4.5 K cold mass and its thermal shields, while the proximity cryogenics takes the cooling capacity generated by the external common system and distributes it to the four magnets according to the various operating scenarios. Two independent proximity cryogenic systems have been designed taking into account the difference in cooling principle of the solenoid and the three toroids, respectively.

  10. How to improve outcome in surgery for Proximal Hypospadias?

    Science.gov (United States)

    Qureshi, Abdul Hafeez; Zaidi, Syed Zafar

    2016-02-01

    To evaluate the role of subdartos fascial tissue as watertight layer in improving outcome for 2-stage proximal hypospadias surgery. The experimental study was conducted at the Department of Urology, Indus Hospital, Karachi, and comprised an audit of patients with proximal hypospadias who underwent surgery from July 1, 2007, to December 31, 2011. The initial two-stage repair of proximal hypospadias led to a high rate of urethrocutanous fistula formation (Group A), and, thus, a modification was introduced and subdartos facial double layer was applied over the urethral suture line (Group B). The results were compared regarding age, type of hypospadias, graft failure and urethrocutanous fistula in these patients. There were 27 patients in Group A and 16(59.3%) of them ended up having urethrocutanous fistula. Group B had 25 patients and only 2(8%) had fistula formation. The application of dartos facial flap waterproofing layer reduced fistula rate.

  11. Specifics of proximal caries and their diagnostics in posterior teeth

    Directory of Open Access Journals (Sweden)

    Wojcik-Checinska Ilona

    2015-06-01

    Full Text Available Proximal surfaces are the second in turn after the occlusal surfaces, as being the most exposed places to the carious process. The specificity of changes and location makes the diagnostic of approximal cavities difficult. The aim of the study was to collect information on possibilities of detection, monitoring and assessment of carious lesions located on proximal surfaces, starting from the early stage. On the base of current literature, chosen methods of diagnosis, from conventional, to advanced technologies were presented. Current literature also suggests that none of the diagnostic methods exclude the possibility of misdiagnosis of proximal caries. Therefore, during the diagnosing of doubtful cases, it is advisable to employ several methods of assessment, with simultaneous individual appraisal of caries risk factors, such as oral hygiene, frequency of eating sweets or the number of active caries foci.

  12. Cilastatin attenuates cisplatin-induced proximal tubular cell damage.

    Science.gov (United States)

    Camano, Sonia; Lazaro, Alberto; Moreno-Gordaliza, Estefania; Torres, Ana M; de Lucas, Carmen; Humanes, Blanca; Lazaro, Jose A; Milagros Gomez-Gomez, M; Bosca, Lisardo; Tejedor, Alberto

    2010-08-01

    A major area in cancer therapy is the search for protective strategies against cisplatin-induced nephrotoxicity. We investigated the protective effect of cilastatin on cisplatin-induced injury to renal proximal tubular cells. Cilastatin is a specific inhibitor of renal dehydrodipeptidase I (DHP-I), which prevents hydrolysis of imipenem and its accumulation in the proximal tubule. Primary cultures of proximal cells were treated with cisplatin (1-30 microM) in the presence or absence of cilastatin (200 microg/ml). Apoptosis and mitochondrial injury were assessed by different techniques. Cisplatin uptake and DNA binding were measured by inductively coupled plasma spectrometry. HeLa cells were used to control the effect of cilastatin on the tumoricidal activity of cisplatin. Cisplatin increased cell death, apoptotic-like morphology, caspase activation, and mitochondrial injury in proximal tubular cells in a dose- and time-dependent way. Concomitant treatment with cilastatin reduced cisplatin-induced changes. Cilastatin also reduced the DNA-bound platinum but did not modify cisplatin-dependent up-regulation of death receptors (Fas) or ligands (tumor necrosis factor alpha, Fas ligand). In contrast, cilastatin did not show any effects on cisplatin-treated HeLa cells. Renal DHP-I was virtually absent in HeLa cells. Cilastatin attenuates cisplatin-induced cell death in proximal tubular cells without reducing the cytotoxic activity of cisplatin in tumor cells. Our findings suggest that the affinity of cilastatin for renal dipeptidase makes this effect specific for proximal tubular cells and may be related to a reduction in intracellular drug accumulation. Therefore, cilastatin administration might represent a novel strategy in the prevention of cisplatin-induced acute renal injury.

  13. One-stage surgical correction of proximal hypospadias.

    Science.gov (United States)

    Joseph, V T

    2003-01-01

    Proximal hypospadias poses major problems in surgical correction owing to the complexity and severity of the abnormalities, leading to the use of staged repairs to correct this condition. However, with precise definition of the components of this deformity a single-stage operation can be developed and applied successfully for surgical correction of this condition. Twenty-six patients with severe proximal hypospadias were subjected to a one-stage repair. Excision of proximal fibrotic dartos tissue and removal of dysplastic urethral plate tissue corrected chordee completely. Urethral reconstruction was then performed by tubularising a flap of dorso-lateral preputial skin which was then anastomosed to the proximal urethra. The glandular part of the urethra was reconstructed using the distal part of the flap as an onlay graft over the meatal groove. The suture lines were covered with a layer of dartos tissue and skin closure was completed by transposing dorsal skin to surface the ventral penile shaft. A urethral catheter was left in for 10 days. All patients have been followed up after surgery from 1 to 5 years with a median period of 2 years. There were no fistulas. Two patients had mild stenosis at the meatus which responded to dilatation. One patient developed a stricture at the proximal anastomosis which required secondary correction. All other patients achieved satisfactory correction, both in terms of voiding and in the cosmetic appearance of the genitalia. Single-stage repair of hypospadias can be successfully applied in the correction of severe proximal hypospadias. It requires meticulous dissection and careful design of reconstructive techniques. The end results are comparable to staged procedures and morbidity is significantly lower.

  14. Interindividual variability in social insects - proximate causes and ultimate consequences.

    Science.gov (United States)

    Jeanson, Raphaël; Weidenmüller, Anja

    2014-08-01

    Individuals within social groups often show consistent differences in behaviour across time and context. Such interindividual differences and the evolutionary challenge they present have recently generated considerable interest. Social insects provide some of the most familiar and spectacular examples of social groups with large interindividual differences. Investigating these within-group differences has a long research tradition, and behavioural variability among the workers of a colony is increasingly regarded as fundamental for a key feature of social insects: division of labour. The goal of this review is to illustrate what we know about both the proximate mechanisms underlying behavioural variability among the workers of a colony and its ultimate consequences; and to highlight the many open questions in this research field. We begin by reviewing the literature on mechanisms that potentially introduce, maintain, and adjust the behavioural differentiation among workers. We highlight the fact that so far, most studies have focused on behavioural variability based on genetic variability, provided by e.g. multiple mating of the queen, while other mechanisms that may be responsible for the behavioural differentiation among workers have been largely neglected. These include maturational, nutritional and environmental influences. We further discuss how feedback provided by the social environment and learning and experience of adult workers provides potent and little-explored sources of differentiation. In a second part, we address what is known about the potential benefits and costs of increased behavioural variability within the workers of a colony. We argue that all studies documenting a benefit of variability so far have done so by manipulating genetic variability, and that a direct test of the effect of behavioural variability on colony productivity has yet to be provided. We emphasize that the costs associated with interindividual variability have been largely

  15. Evolution of treatment of of the proximal humerus fractures (review

    Directory of Open Access Journals (Sweden)

    P. G. Kogan

    2013-01-01

    Full Text Available The article in generalized form acquaints with the publications devoted to the bases of proximal humeral fractures treatment. A brief digression on anatomy and biomechanics of the humeral joint allows to consider the main morphological features of it. The most commonly used classification of proximal humeral fractures concisely classify many types of damage. According to the clinical and anatomical characteristics of fractures tracked the historical aspect, the development and the current state of the most common methods of treatment. In his review collected works authors share their experience in the application of methods. It allows to further the perspective directions.

  16. Critical Proximity as a Methodological Move in Techno-Anthropology

    DEFF Research Database (Denmark)

    Birkbak, Andreas; Petersen, Morten Krogh; Elgaard Jensen, Torben

    2015-01-01

    echno-Anthropology is a new field, operating with a broad range of methodologies and approaches. This gives rise to the question: What does it mean for Techno-Anthropological research to be critical? In this paper, we discuss this question by developing and specifying the notion of ‘critical...... work through two cases—one on the involvement of users in innovation projects and another on commercial web technologies for tracing issues—to show how critical proximity may be practiced. We sum up the lessons derived in four methodological guidelines for doing research with critical proximity....

  17. Improving outcomes for patients with proximal femoral fractures.

    Science.gov (United States)

    Shah, Dipal; Dhillon, Amritpaul; Mulvaney, Emily; Robinson, Margaret; Weerasuriya, Namal

    2014-09-25

    A peri-operative bay was created to treat all patients with proximal femoral fractures admitted to one trauma ward at the Queen's Medical Centre, Nottingham. All patients had urinary catheterisation and their fluid intake and output was recorded; patients had daily blood tests and were cared for on pressure-relieving mattresses. In addition, a study day was provided for all nursing staff on the management of patients with proximal femoral fractures. These measures resulted in a significant decrease in the incidence of acute kidney injury, reduced the length of hospital stay for patients on this ward and reduced the numbers of falls and pressure-related injuries for these patients.

  18. Bizarre parosteal osteochondromatous proliferation of the proximal humerus: case report

    Energy Technology Data Exchange (ETDEWEB)

    Bush, J.B.; Meyer, Mark S. [Ochsner Clinic Foundation, Department of Orthopedics, New Orleans, LA (United States); Reith, John D. [University of Florida College of Medicine, Departments of Pathology, Immunology and Laboratory Medicine and Orthopaedics and Rehabilitation, Gainesville, Florida (United States)

    2007-06-15

    Bizarre parosteal osteochondromatous proliferation (BPOP), or Nora's lesion, is a rare lesion of bone occurring predominantly in the long bones of the hands and feet. It exists as a puzzling clinical entity of uncertain origins and high recurrence rates after surgical resection. To our knowledge, this clinical entity has not been reported in the proximal aspect of the humerus. An interesting report of a lesion occurring in the proximal humerus, which initially was misinterpreted as a parosteal osteosarcoma, is discussed outlining the clinical, radiographic and pathologic features of the BPOP lesion. (orig.)

  19. Proximal antecedents to violent events in adolescent dating relationships.

    Science.gov (United States)

    Stephenson, Pamela S; Martsolf, Donna S; Draucker, Claire Burke

    2011-01-01

    Dating violence affects 25-60% of adolescents. This study developed a typology of proximal antecedents to violent events in adolescent dating relationships. Descriptions of 307 dating violence events were extracted from transcribed interviews with 87 young adults who experienced dating violence as adolescents. Verbatim text preceding the description of each violent event was identified as a proximal antecedent. Cross-case analysis was used to develop a typology of five antecedent categories: "pulling away,"  "demanding obedience," "discovering involvement with a rival," "defining the relationship," "demonstrating disrespect." Practitioners can use this typology to engage teens in discussions of factors that precede dating violence events.

  20. Modelling and Analysis of Proximity Effect in IGBT Fuses

    DEFF Research Database (Denmark)

    Iov, Florin; Blaabjerg, Frede; Rasmussen, Henrik

    2005-01-01

    . Even with an active protection, a high power IGBT still has a risk of exhibiting a violent rupture in the case of a fault if e.g. IGBT fuses are not protecting it. By introducing fuses into voltage source converters a better protection of IGBT's can be achieved. However, skin and proximity effects...... affect the current distribution in a fuse due to the high frequency currents and thus a need for de-rating the fuse. This paper shows an analytical model for studying the proximity effect into a fuse. The results obtained using this model are compared with experiments....

  1. Arthroscopic-assisted removal of proximal tibia locking plates

    Directory of Open Access Journals (Sweden)

    Gille Justus

    2012-05-01

    Full Text Available Abstract We present a new technique to remove plates from the proximal tibia arthroscopic-assisted with all advantages of the minimally invasive surgery and the possibility to treat concomitant intraarticular pathologies. The initial results (n = 7 are promising with an increase of the Lysholm score in all cases studied [preop. median 78 (range 32–100, postop. median 89 (range 60–100]. In conclusion, arthroscopic-assisted hardware removal at the proximal tibia is feasible and may provide patients with all the benefits of minimal-invasive hardware removal. The described technique can be recommended for all surgeons familiar with arthroscopic surgery.

  2. Proximal focal humeral deficiency in a large breed dog.

    Science.gov (United States)

    Kalff, S; Gemmill, T

    2012-01-01

    A 26-week-old female Boerboel was referred for evaluation of progressive left thoracic limb lameness. Computed tomography and radiographic evaluation revealed radiolucency of the caudal region of the proximal humeral metaphysis, absence of the humeral head, and gross distortion of the glenoid. Given the severe glenohumeral deformation, arthrodesis of the left shoulder was performed using orthogonal locking bone plates, lag screw fixation, and bone grafting. Despite late implant failure, arthrodesis was successful in this case, and satisfactory limb function was restored. To the author's knowledge, this is the first report of a case of a focal developmental deficiency of the proximal humerus reported in a dog.

  3. [Complex fracture-dislocation of the proximal interphalangeal joint. A case report and focus on palmar proximal interphalangeal fractures-dislocations].

    Science.gov (United States)

    Lawson, E; Thomsen, L; Hans-Moevi Akué, A; Falcone, M-O

    2013-10-01

    The palmar fracture-dislocation of the proximal interphalangeal (PIP) joint of fingers is an uncommon injury. We report a complex form in a 16-year old teenager, associating a palmar fracture-dislocation and a fracture of the base of the middle phalanx with the dorsal fragment dislocated between the neck of the proximal phalange and the palmar plate. The management was surgical with open reduction and fixation of the fragments by K-wires and temporary PIP arthrorisis. The result at 6months of follow- up after removal of the wires and physiotherapy was satisfactory. The patient was painless with a range of motion of 115°. Clinically, the sagittal and frontal stability of the joint both in flexion and extension was maintained. Osseous healing was obtained on X-ray control. The patient went back to his usual activities. A focus on palmar fracture-dislocations of PIP joint is presented through incidence, mechanism and treatment. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

  4. Proximity Operations Nano-Satellite Flight Demonstration (PONSFD) Rendezvous Proximity Operations Design and Trade Studies

    Science.gov (United States)

    Griesbach, J.; Westphal, J. J.; Roscoe, C.; Hawes, D. R.; Carrico, J. P.

    2013-09-01

    The Proximity Operations Nano-Satellite Flight Demonstration (PONSFD) program is to demonstrate rendezvous proximity operations (RPO), formation flying, and docking with a pair of 3U CubeSats. The program is sponsored by NASA Ames via the Office of the Chief Technologist (OCT) in support of its Small Spacecraft Technology Program (SSTP). The goal of the mission is to demonstrate complex RPO and docking operations with a pair of low-cost 3U CubeSat satellites using passive navigation sensors. The program encompasses the entire system evolution including system design, acquisition, satellite construction, launch, mission operations, and final disposal. The satellite is scheduled for launch in Fall 2015 with a 1-year mission lifetime. This paper provides a brief mission overview but will then focus on the current design and driving trade study results for the RPO mission specific processor and relevant ground software. The current design involves multiple on-board processors, each specifically tasked with providing mission critical capabilities. These capabilities range from attitude determination and control to image processing. The RPO system processor is responsible for absolute and relative navigation, maneuver planning, attitude commanding, and abort monitoring for mission safety. A low power processor running a Linux operating system has been selected for implementation. Navigation is one of the RPO processor's key tasks. This entails processing data obtained from the on-board GPS unit as well as the on-board imaging sensors. To do this, Kalman filters will be hosted on the processor to ingest and process measurements for maintenance of position and velocity estimates with associated uncertainties. While each satellite carries a GPS unit, it will be used sparsely to conserve power. As such, absolute navigation will mainly consist of propagating past known states, and relative navigation will be considered to be of greater importance. For relative observations

  5. Open reconstruction of complex proximal metadiaphyseal fragility fractures of the humerus.

    Science.gov (United States)

    James, Isaac B; Farrell, Dana J; Evans, Andrew R; Siska, Peter A; Tarkin, Ivan S

    2014-03-01

    A proactive surgical and rehabilitation protocol was implemented to manage humeral fractures involving both the proximal end and shaft in an older patient population. Primary treatment goals were early return to function and reliable fracture union with minimal complications. From 2008 to 2012, 21 such operations were performed; 18 were considered "fragility" fractures based on mechanism, patient age, and evidence of osteopenia or osteoporosis. Open reduction and internal fixation (ORIF) was employed using direct reduction and fixation with a long periarticular locking plate. Physiotherapy was commenced 2 weeks postoperatively. The Disabilities of the Arm, Shoulder, and Hand (DASH) questionnaire was used to assess functional outcome at a time point greater than 1 year postoperative. The study group consisted primarily of elderly females (83% with a median age of 69 years) whom sustained complex metadiaphyseal proximal humeral fractures after simple mechanical fall (78%). Uneventful union occurred in all cases. Local complications included 1 case of partial radial nerve palsy, which had resolved completely by 1 year. No cases of infection were identified. Long-term return to functionality was evident with a median DASH score of 12 (mean = 21, standard deviation = 20, n = 13). Seventy five percent of patients reported minimal or no pain (question [Q] 24), and 75% achieved return of overhead function (Q6, 12, and 15). Treatment of complex metadiaphyseal fragility fractures with anatomic reduction, fixed angle plating, and early physiotherapy returns the older patient to optimized functionality with minimal risk of complication. The DASH outcomes are equivalent to ORIF of isolated proximal humerus fractures and clinically indistinguishable from the general population.

  6. Eldercare work, migrant care workers, affective care and subjective proximity.

    Science.gov (United States)

    Lovelock, Kirsten; Martin, Greg

    2016-08-01

    To document and explore the experience of migrant care workers providing health and social care to the elderly in institutional care settings and in the homes of the elderly in the community in New Zealand with a particular focus on the affective components of care work. This qualitative study involved conducting face-to-face, open-ended, semi-structured interviews with 29 migrant care workers in the eldercare sector in the cities of Auckland and Wellington, New Zealand. Participants were recruited through various agencies focusing on aged care and engaged with migrant eldercare workers and snowballing through participant referral. Sample size was determined when saturation was reached. The interviews were audio recorded, transcribed verbatim, themes were identified and then analysed drawing on a body of theoretical work in the fields of emotional anthropology and moral geography and the international empirical literature addressing migrant eldercare workers. As with the international research in this field we found that these workers were vulnerable to exploitation, the workforce is largely feminised and stereotypical understandings of racial groups and national characteristics informed recruitment and the workplace experience. Here attributing gradients of affect to particular migrant groups in the workforce was the main mechanism employed to establish worker worth and difference. Identifying with these gradients of affect enabled these eldercare workers to demonstrate that they met the moral and ethical requirements of permanent residency and ultimately citizenship. Eldercare workers in the home were vulnerable to 'blurred emotional boundaries' and care recipient demand for greater emotional commitment. The migrant eldercare workers in this study all shared vulnerable residential status and many feared they would never obtain permanent residency or citizenship. All had family who remained in the Philippines and towards whom they had an obligation to substitute

  7. The theoretical simulation on electrostatic distribution of 1st proximity region in proximity focusing low-light-level image intensifier

    Science.gov (United States)

    Zhang, Liandong; Bai, Xiaofeng; Song, De; Fu, Shencheng; Li, Ye; Duanmu, Qingduo

    2015-03-01

    Low-light-level night vision technology is magnifying low light level signal large enough to be seen by naked eye, which uses the photons - photoelectron as information carrier. Until the micro-channel plate was invented, it has been possibility for the realization of high performance and miniaturization of low-light-level night vision device. The device is double-proximity focusing low-light-level image intensifier which places a micro-channel plate close to photocathode and phosphor screen. The advantages of proximity focusing low-light-level night vision are small size, light weight, small power consumption, no distortion, fast response speed, wide dynamic range and so on. It is placed parallel to each other for Micro-channel plate (both sides of it with metal electrode), the photocathode and the phosphor screen are placed parallel to each other. The voltage is applied between photocathode and the input of micro-channel plate when image intensifier works. The emission electron excited by photo on the photocathode move towards to micro-channel plate under the electric field in 1st proximity focusing region, and then it is multiplied through the micro-channel. The movement locus of emission electrons can be calculated and simulated when the distributions of electrostatic field equipotential lines are determined in the 1st proximity focusing region. Furthermore the resolution of image tube can be determined. However the distributions of electrostatic fields and equipotential lines are complex due to a lot of micro-channel existing in the micro channel plate. This paper simulates electrostatic distribution of 1st proximity region in double-proximity focusing low-light-level image intensifier with the finite element simulation analysis software Ansoft maxwell 3D. The electrostatic field distributions of 1st proximity region are compared when the micro-channel plates' pore size, spacing and inclination angle ranged. We believe that the electron beam movement

  8. Proximal Intermetatarsal Divergence in Distal Chevron Osteotomy for Hallux Valgus: An Overlooked Finding.

    Science.gov (United States)

    Akpinar, Evren; Buyuk, Abdul Fettah; Cetinkaya, Engin; Gursu, Sarper; Ucpunar, Hanifi; Albayrak, Akif

    2016-01-01

    The goal of distal chevron osteotomy for hallux valgus is to restore proper first-toe joint alignment by performing lateral translation of the distal first metatarsal fragment (the metatarsal head). We hypothesized that in some patients this procedure might also result in involuntary medial translation of the proximal first metatarsal fragment, which we called proximal intermetatarsal divergence. The aim of the present study was to compare the pre- and postoperative radiographs of patients with hallux valgus to determine whether we could identify proximal intermetatarsal divergence. We retrospectively compared the pre- and postoperative radiographs of 29 feet in 28 patients treated with distal chevron osteotomy. Two different methods were used to measure the intermetatarsal angles: the anatomic intermetatarsal angle (aIMA) and the mechanical intermetatarsal angle (mIMA). The maximum intermetatarsal distance (MID) was also measured. We defined proximal intermetatarsal divergence as a postoperative increase in the aIMA or MID, coupled with a decrease in the mIMA. For data analysis, we divided the patients into low-angle (mild deformity) and high-angle (severe deformity) groups, according to their preoperative mIMA. The mean ± standard deviation patient age was 41 ± 14 years. In the low-angle group, the mean mIMA decreased (from 10.91° to 7.00°), the mean aIMA increased (from 11.80° to 13.55°), and the mean MID increased (from 17.97 mm to 20.60 mm; p = .001, for all). In the high-angle group, the mean mIMA decreased (from 14.30° to 6.90°; p = .001), the mean aIMA decreased (from 14.77° to 13.54°; p = .06), and the mean MID decreased (from 20.74 mm to 20.37 mm; p = .64). The results of our study suggest that proximal intermetatarsal divergence might occur after distal chevron osteotomy for hallux valgus, primarily in patients with a low preoperative mIMA. Copyright © 2016 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All

  9. Depressionary Effect of Proximity of Residential Properties to Waste ...

    African Journals Online (AJOL)

    Depressionary Effect of Proximity of Residential Properties to Waste Disposal Sites in Nigeria. ... a helpful Frequently Asked Questions about PDFs. Alternatively, you can download the PDF file directly to your computer, from where it can be opened using a PDF reader. To download the PDF, click the Download link above.

  10. PROXIMAL RADIUS RECONSTRUCTION BY METATARSAL OSTEOCHONDRAL AUTO GRAFT

    Directory of Open Access Journals (Sweden)

    Kammar

    2015-04-01

    Full Text Available 17 Year Old student, Pavan presents with swelling since 8 months. Swelling was diffuse over forearm. Tenderness was present. No local rise of temperature. Range of m ovement at elbow was restricted and painful terminally. No distal neurovascular deficits. X - ray reveale d it to be an a neurysmal bone cyst of proximal right radius. FNAC showed Aneurysmal bone cyst for which curettage and bone grafting was done. Post 6 months tumour recurred with a swelling around upper third of right fo rearm. FNAC and J - needle biopsy showed it to be a neurysmal bone cyst. MRI showed ABC of proximal radius without soft tissue involvement. Excision of proximal third of radius with reconstruction by 3 rd metatarsal and augmented with fib ular graft and stabili zed with dynamic c ompression plate and screws . Tumour specimen was sent for h istopathology a t 2 weeks p ost operatively patient had good range of movements. At present patient has full range of flexion , extension , supination & pronation . He is able to carry out his ADL. In the literature proximal radius reconstruction has been tried in traumatic communited radial head fractures. Here it done for r ecurrent benign tumour like aneurysmal bone cyst, as the base of 3rd metatarsal anatomically coincides with radial head and hence a better radio - capital articulation

  11. outcome of plate osteosynthesis in the management of proximal

    African Journals Online (AJOL)

    through decreased bone mineral density, disruption of bone micro-architecture and reduction in non- collagenous proteins. Proximal humerus fractures are difficult to manage, particularly in the osteoporotic bone, where the fracture is usually .... is followed by pendulum shoulder exercises which gradually graduate to active ...

  12. Proximate analysis and total lycopene content of some tomato ...

    African Journals Online (AJOL)

    Standard analytical techniques were employed to determine the proximate composition and lycopene content of three tomato cultivars namely: Roma VF, Ronita and UTC grown in six local government areas of Kano state, Nigeria. Results indicated mean values of 0.15±0.03, 0.16±0.01, 0.15±0.01% titratable acidity; ...

  13. Case report of LCP pediatric hip osteosynthesis of a proximal ...

    African Journals Online (AJOL)

    We present a case report demonstrating the experience of the department of pediatric orthopaedics of the University Orthopedic Hospital at Sofia Medical University in the treatment of an intertrochanteric proximal femoral fracture in a child with osteopetrosis. We performed open fracture reduction with stable 120° LCP ...

  14. Quality Assessment and Proximate Analysis of Amaranthus hybridus ...

    African Journals Online (AJOL)

    user

    ABSTRACT: The aim of this research is to determine the quality and proximate composition of. Amaranthus hybridus, Celosia argentea, and Talinum triangulare obtained from open .... Vegetable microbiota is very diverse and vegetable quality and safety depend on many factors, including soil, fertilizer, irrigation water, ...

  15. Noncycling mappings and best proximity pair results in Hilbert and ...

    African Journals Online (AJOL)

    A new class of noncyclic mappings, called generalized noncyclic relatively nonexpansive, is introduced and used to study the existence of best proximity pairs in the setting of uniformly convex Banach spaces. We also obtain a weak convergence theorem for noncyclic relatively nonexpansive mappings in the setting of ...

  16. Two Stages repair of proximal hypospadias: Review of 33 cases

    African Journals Online (AJOL)

    HussamHassan

    It decreases the rate of fistula formation; disruption; stenosis and gives a satisfactory cosmetic appearance. Index Word: proximal hypospadias, two stages repair. ... Second procedure: a) formation of the neo-urethra, b) skin closure, c) dressing. Complete degloving of the penile shaft was performed till its base. Then artificial ...

  17. Fractures of the proximal humerus in children and adolescents

    Directory of Open Access Journals (Sweden)

    Ruban Raj Joshi, Dr

    2013-12-01

    Full Text Available Background: In most children proximal humeral fractures are treated non-operatively with generally good results. The aim of the study was to evaluate the clinical outcome of closed/open reduction in children with severely displaced proximal humeral fractures. Materials and Methods: The charts of 15 patients (8 girls and 7 boys; mean age: 9.4 years with proximal humeral fractures who were managed at our institution were reviewed from October 2011 to December 2013. Results: There were 7 metaphyseal fractures and 8 physeal injuries which were angulated according to Neer-Horowitz score as grade II (n=2, grade III(n=4 and grade IV(n=9. Associated lesions comprised open fracture with head trauma in a 2 year old female child which was operated on primarily and the 14 others by secondary intention. All patients were treated surgically with either closed (n = 5 or open (n=10 reduction and internal fixation with Kirschner wire or titanium elastic nails (TENs. They were assessed for clinical and radiological healing at a mean follow up of 1.25 years ranging from 0.5 to 2.0 years. Conclusion: Surgical option is indicated for severely displaced and unstable fractures in older children and adolescents. In addition to the periosteum , long head of the biceps, deltoid muscle, and bone fragments in combination can prevent fracture reduction. Key words: Proximal humerus fracture, Children, Open reduction, Operative.

  18. Proximate composition and amino acid profile of rice husk ...

    African Journals Online (AJOL)

    Native rice husk (NRH) was fermented with Pleurotus ostreatus for 7, 14 and 21 days to improve the nutritional values. The proximate composition and amino acid profiles were determined. The results showed that crude fibre (CF), nitrogen free extract (NFE), acid detergent fibre (ADF), and neutral detergent fibre (NDF) were ...

  19. Proximate composition of traditional local sorghum beer “dolo ...

    African Journals Online (AJOL)

    Dolo is a local beer manufactured from malted sorghum grains. It is the most commonly consumed alcoholic beverage in Burkina Faso (60% of population). Thirty (30) samples of dolo were collected from local markets in Ouagadougou and analyzed with respect to their proximate compositions and pH values using ...

  20. Effect of cooking method on proximate and mineral composition of ...

    African Journals Online (AJOL)

    This study investigated effect(s) of cooking fresh fish (Lake Malawi tilapia) by boiling, roasting, pan frying and, using a locally made fireless cooker) on its proximate (protein, fat, ash and moisture) and mineral (calcium, magnesium, zinc, iron and phosphorus) composition. Highest and lowest values for crude protein were ...