Technology and the use of acrylics for provisional dentine protection.

Science.gov (United States)

Kapusevska, Biljana; Dereban, Nikola; Popovska, Mirjana; Nikolovska, Julijana; Radojkova Nikolovska, Vеrа; Zabokova Bilbilova, Efka; Mijoska, Aneta

2013-01-01

Acrylics are compounds polymerized from monomers of acrylic, metacrylic acid or acrylonitrates. The purpose of this paper is to present the technology and use of acrylics for provisional dentine protection in the practice of dental prosthodontics. For this reason, we followed 120 clinical cases from the everyday clinical practice, divided into 4 groups of 30 patients who needed prosthetic reconstruction. The first group included cases in which we applied celluloid crowns for dentine protection, for the second group we used acrylic teeth from a set of teeth for complete dentures; in the third and fourth groups the fabrication was done with the system of an impression matrix and the acrylic resin block technique respectively. In all the examined patients, the gingival index by Silness and Loe and the vitality of the dental pulp were verified clinically, after preparation and 8 days from the placement of the provisional crown. The value for dental sensitivity measured after preparation was 2.59, and 8 days after the placement of the provisional crown it bwas 3.1. From these results we can conclude that after the 8th day from the placement of the provisional crown, there was an adaptation period, characterized by a decrease in the painful sensations. The value of the Silness and Loe gingival index measured after the preparation was 1.34, and 8 days from the placement of the provisional crown was 0.94. The results inclined us to the fact that the provisional acrylic crowns facilitated the reparation of the periodontal tissue.

Retrospective study investigating the clinical success of two provisional implant systems

OpenAIRE

Hotz, Nadine

2011-01-01

The use of dental implants allows a reliable stabilisation of prosthesis. Usually, definitive implants can´t be used for fixation of prosthesis during their healing period. Therefore, in many cases it is not possible to follow the demand of patients of an immediate loading of definitive implants to avoid a unfixed dental prosthesis. This is one domain of provisional dental implants. The present study of two provisional implant systems approves the benefit of provisional implants during...

Effect of different provisional cement remnant cleaning procedures including Er:YAG laser on shear bond strength of ceramics.

Science.gov (United States)

Zortuk, Mustafa; Gumus, Hasan Onder; Kilinc, Halil Ibrahim; Tuncdemir, Ali Riza

2012-11-01

The purpose of this study was to evaluate the effect of provisional cement removal by different dentin cleaning protocols (dental explorer, pumice, cleaning bur, Er:YAG laser) on the shear bond strength between ceramic and dentin. In total, 36 caries-free unrestored human third molars were selected as tooth specimens. Provisional restorations were fabricated and cemented with eugenol-free provisional cement. Then, disc-shaped ceramic specimens were fabricated and randomly assigned to four groups of dentin cleaning protocols (n = 9). Group 1 (control): Provisional cements were mechanically removed with a dental explorer. Group 2: The dentin surfaces were treated with a cleaning brush with pumice Group 3: The dentin surfaces were treated with a cleaning bur. Group 4: The provisional cements were removed by an Er:YAG laser. Self-adhesive luting cement was used to bond ceramic discs to dentin surfaces. Shear bond strength (SBS) was measured using a universal testing machine at a 0.05 mm/min crosshead speed. The data were analyzed using a Kolmogorov Smirnov, One-way ANOVA and Tukey HSD tests to perform multiple comparisons (α=0.05). THE DENTIN CLEANING METHODS DID NOT SIGNIFICANTLY AFFECT THE SBS OF CERAMIC DISCS TO DENTIN AS FOLLOWS: dental explorer, pumice, cleaning bur, and Er:YAG laser. The use of different cleaning protocols did not affect the SBS between dentin and ceramic surfaces.

Provisional matrix: A role for versican and hyaluronan.

Science.gov (United States)

Wight, Thomas N

2017-07-01

Hyaluronan and versican are extracellular matrix (ECM) components that are enriched in the provisional matrices that form during the early stages of development and disease. These two molecules interact to create pericellular "coats" and "open space" that facilitate cell sorting, proliferation, migration, and survival. Such complexes also impact the recruitment of leukocytes during development and in the early stages of disease. Once thought to be inert components of the ECM that help hold cells together, it is now quite clear that they play important roles in controlling cell phenotype, shaping tissue response to injury and maintaining tissue homeostasis. Conversion of hyaluronan-/versican-enriched provisional matrix to collagen-rich matrix is a "hallmark" of tissue fibrosis. Targeting the hyaluronan and versican content of provisional matrices in a variety of diseases including, cardiovascular disease and cancer, is becoming an attractive strategy for intervention. Copyright © 2016 Elsevier B.V. All rights reserved.

VSRR Provisional Drug Overdose Death Counts

Data.gov (United States)

U.S. Department of Health & Human Services — This data contains provisional counts for drug overdose deaths based on a current flow of mortality data in the National Vital Statistics System. National...

Determination of Total Arsenic in Seaweed Products by Neutron Activation Analysis

International Nuclear Information System (INIS)

Salim, N.; Santoso, M.; Yanuar, A.; Damayanti; Kartawinata, T.G.

2013-01-01

Seaweed products are widely consumed as food nowadays. Seaweeds are known to contain arsenic due to their capability to accumulate arsenic from the environment. Arsenic is a known toxic element which naturally occurs in the environment. Ingestion of high levels of arsenic will cause several adverse health effects. Arsenic in food occurs at trace concentrations which require sensitive and selective analysis methods to perform elemental analysis on. Validated neutron activation analysis was used to determine the arsenic contents in seaweed products namely catoni from domestic product and nori from foreign products. The total arsenic concentration in the samples analyzed ranges from 0.79 mg/kg to 30.14 mg/kg with mean concentration 14.39 mg/kg. The estimated exposure to arsenic contributed by the analyzed products is from 0.07% up to 8.54% of the established provisional tolerable daily intake (PTDI) which is still far below the maximum tolerable level. (author)

Determination of Total Arsenic in Seaweed Products by Neutron Activation Analysis

Directory of Open Access Journals (Sweden)

N. Salim

2013-04-01

Full Text Available Seaweed products are widely consumed as food nowadays. Seaweeds are known to contain arsenic due to their capability to accumulate arsenic from the environment. Arsenic is a known toxic element which naturally occurs in the environment. Ingestion of high levels of arsenic will cause several adverse health effects. Arsenic in food occurs at trace concentrations which require sensitive and selective analysis methods to perform elemental analysis on. Validated neutron activation analysis was used to determine the arsenic contents in seaweed products namely catoni from domestic product and nori from foreign products. The total arsenic concentration in the samples analyzed ranges from 0.79 mg/kg to 30.14 mg/kg with mean concentration 14.39 mg/kg. The estimated exposure to arsenic contributed by the analyzed products is from 0.07% up to 8.54% of the established provisional tolerable daily intake (PTDI which is still far below the maximum tolerable level

Effect of Provisional Cements on Shear Bond Strength of Porcelain Laminate Veneers

OpenAIRE

Altintas, Subutay Han; Tak, Onjen; Secilmis, Asli; Usumez, Aslihan

2011-01-01

Objectives: The purpose of this study was to evaluate the effect of three provisional cements and two cleaning techniques on the final bond strength of porcelain laminate veneers. Methods: The occlusal third of the crowns of forty molar teeth were sectioned and embedded in autopolymerizing acrylic resin. Dentin surfaces were polished and specimens were randomly divided into four groups (n=10). Provisional restorations were fabricated and two provisional restorations were cemented onto each to...

The provisional matrix: setting the stage for tissue repair outcomes.

Science.gov (United States)

Barker, Thomas H; Engler, Adam J

2017-07-01

Since its conceptualization in the 1980s, the provisional matrix has often been characterized as a simple fibrin-containing scaffold for wound healing that supports the nascent blood clot and is functionally distinct from the basement membrane. However subsequent advances have shown that this matrix is far from passive, with distinct compositional differences as the wound matures, and providing an active role for wound remodeling. Here we review the stages of this matrix, provide an update on the state of our understanding of provisional matrix, and present some of the outstanding issues related to the provisional matrix, its components, and their assembly and use in vivo. Copyright © 2017. Published by Elsevier B.V.

Provisional prostheses during ridge augmentation and implant dentistry.

Science.gov (United States)

Livada, Rania; Hottel, Timothy L; Shiloah, Jacob

2013-01-01

Recent advancements in ridge augmentation and bone regeneration have expanded the pool of patients that could benefit from dental implants. However, providing the patient with a temporary prosthesis during the wound healing phase without impairing the process is a challenging task. This article summarizes available information pertaining to provisional prostheses, both tooth-supported and soft tissue-supported, that may meet the patient needs. The advantages and disadvantages of each class of prosthesis, along with indications and contraindications, were taken into consideration to aid the restorative dentist in choosing the optimal provisional for their patients.

Comparative Evaluation of Flexural Strength of Provisional Crown and Bridge Materials-An Invitro Study.

Science.gov (United States)

Singh, Ankita; Garg, Sandeep

2016-08-01

Provisional restorations serve a key role as a functional and esthetic try-in for the design of the final prosthesis. During selection of materials for this restoration, clinicians must consider physical properties, ease of handling, cost and patient satisfaction and approval. To evaluate and compare the flexural strength of provisional crown and bridge materials available commercially. This in-vitro study was done to compare the flexural strength of six temporary crown and bridge materials available commercially at 24 hours, 8 days and after repair. Three poly methyl methacrylate based materials (DPI, SC10 and Trulon) and three bis-acrylic based composite resins (Protemp, Cooltemp and Luxatemp) were selected. A total of 72 specimens of dimensions 64mm×10mm×2.5mm were prepared from these materials (12 from each material) and divided into two groups (n=36). Specimens were stored in artificial saliva and were fractured after 24 hours and 8 days using Universal Testing Machine. The fractured samples from the 8 days study were then subjected to repair. A uniform space of 2mm and a 450 bevel was maintained for all the repaired samples for better distribution of forces. Flexural strength of these repaired samples was recorded using the same machine. RESULTs were recorded and statistically analysed by one-way Anova and Post hoc tests. RESULTs revealed that there was decrease in flexural strength for all the materials tested from 24 hours to 8 days, though flexural strength between poly methyl methacrylate and bis-acrylic resins was similar at 24 hours and 8 days time interval. A substantial decrease was noticed in the strength of bis-acrylic composite resins after repair. From the current study it can be suggested that though there is decrease in flexural strength for all the materials from 24 hours to 8 days, both can be used to fabricate the provisional restorations. However, in the event of a fracture of a bis-acrylic provisional restoration, it may be more

In vitro color stability of provisional restorative materials

Directory of Open Access Journals (Sweden)

Hamid Jalali

2012-01-01

Aims: The purpose of this study was to investigate the effect of tea on provisional restorative materials. Setting and Design: This study was designed to measure the degree of color change of three acrylic resin provisional materials, before and after immersion in artificial saliva and artificial saliva-tea solution for 2 and 4 weeks. Materials and Methods : Three types of acrylic provisional materials (duralay, tempron, acropars TRP, were studied. Twenty disks (20±0.1 mm by 2±0.05 mm were fabricated from each material. Specimens were polished with acrylic bur using pumice and diamond polishing paste. Base line color was measured using a spectrophotometer. Ten disks were stored in artificial saliva and 10 were stored in a solution of artificial saliva and tea at room temperature. Color measurements were made after 2 and 4 weeks of immersion. Statistical analysis used: Differences in color changes were compared by two way ANOVA, across the six groups, followed by a Turkey-Kramer′s multiple comparison test. Results: For specimens immersed in artificial saliva, the color change of methyl methacrylate materials; duralay (ΔE=4.94 and tempron (ΔE=6.54, was significantly more than butyl methacrylate material; acropars (ΔE=4.10. After immersion in an artificial saliva- tea solution, tempron exhibited less color change (ΔE=8.50 compared to duralay (ΔE=10.93 and acropars (ΔE=15.64. Conclusion: Color stability of methyl methacrylate is higher than butyl methacrylates so if provisional materials are used for extended periods of time; tempron is preferred.

An indirect technique for assuring simplicity and marginal integrity of provisional restorations during full mouth rehabilitation.

Science.gov (United States)

Al Jabbari, Youssef S; Al-Rasheed, Abdulaziz; Smith, Jesse W; Iacopino, Anthony M

2013-01-01

Full mouth rehabilitation with fixed prosthodontics can be a time- and labor-intensive process. The use of provisional restorations allows the treating clinician to determine the functional and esthetic requirements of the definitive prostheses. However, in the case of full mouth rehabilitation, the individual preparation of provisional restorations for multiple teeth may complicate the provisional phase and increase the treatment time. This article describes a method to simplify the indirect fabrication of provisional restorations for full mouth reconstruction. Provisional restorations may be easily achieved by splinting the provisional restorations in sextants, trimming them according to red pencil marks around the prepared margins as guidelines, and fitting them in the laboratory, utilizing a second set of solid casts for the prepared teeth.

Production of a Fixed Provisional Restoration Using an Acrylic Denture: Technique and Case Report.

Science.gov (United States)

Kocaagaoglu, Hasan

2015-07-01

The damage or loss of anterior teeth causes a negative impact on the patient in many ways. In adolescents and young patients, the provisional replacement with artificial teeth may minimize this impact. Many approaches have been described for provisional restorations. This article discusses about a chairside fixed provisional restoration technique that was adjusted into the edentulous area of a 15-year-old girl.

Microleakage of Glass Ionomer-based Provisional Cement in CAD/CAM-Fabricated Interim Crowns: An in vitro Study.

Science.gov (United States)

Farah, Ra'fat I; Al-Harethi, Naji

2016-10-01

The aim of this study was to compare in vitro the marginal microleakage of glass ionomer-based provisional cement with resin-based provisional cement and zinc oxide non-eugenol (ZONE) provisional cement in computer-aided design and computer-aided manufacturing (CAD/CAM)-fabricated interim restorations. Fifteen intact human premolars were prepared in a standardized manner for complete coverage of crown restorations. Interim crowns for the prepared teeth were then fabricated using CAD/CAM, and the specimens were randomized into three groups of provisional cementing agents (n = 5 each): Glass ionomer-based provisional cement (GC Fuji TEMP LT™), bisphenol-A-glycidyldimethacrylate (Bis-GMA)/ triethylene glycol dimethacrylate (TEGDMA) resin-based cement (UltraTemp® REZ), and ZONE cement (TempBond NE). After 24 hours of storage in distilled water at 37°C, the specimens were thermocycled and then stored again for 24 hours in distilled water at room temperature. Next, the specimens were placed in freshly prepared 2% aqueous methylene blue dye for 24 hours and then embedded in autopolymerizing acrylic resin blocks and sectioned in buccolingual and mesiodistal directions to assess dye penetration using a stereomicroscope. The results were statistically analyzed using a nonparametric Kruskal-Wallis test. Dunn's post hoc test with a Bonferroni correction test was used to compute multiple pairwise comparisons that identified differences among groups; the level of significance was set at p provisional cement demonstrated the lowest microleakage scores, which were statistically different from those of the glass ionomer-based provisional cement and the ZONE cement. The provisional cementing agents exhibited different sealing abilities. The Bis-GMA/TEGDMA resin-based provisional cement exhibited the most effective favorable sealing properties against dye penetration compared with the glass ionomer-based provisional cement and conventional ZONE cement. Newly introduced glass

Elements in rice from the Swedish market: 1. Cadmium, lead and arsenic (total and inorganic).

Science.gov (United States)

Jorhem, L; Astrand, C; Sundström, B; Baxter, M; Stokes, P; Lewis, J; Grawé, K Petersson

2008-03-01

A survey of the levels of cadmium, lead and arsenic in different types of rice available on the Swedish retail market was carried out in 2001--03. The types of rice included long and short grain, brown, white, and parboiled white rice. The mean levels found were as follows: total As: 0.20 mg kg(-1), inorganic As: 0.11 mg kg(-1); Cd: 0.024 mg kg(-1); and Pb: 0.004 mg kg(-1). ICP-MS was used for the determination of As (total and inorganic) after acid digestion. Lead and cadmium were determined using graphite furnace atomic absorption spectrometry (GFAAS) after dry ashing. In countries where rice is a staple food, it may represent a significant contribution in relation to the provisional tolerable weekly intake for Cd and inorganic As.

The use of definitive implant abutments for the fabrication of provisional crowns: a case series.

Science.gov (United States)

Bilhan, Hakan; Geckili, Onur; Mumcu, Emre

2011-10-01

The anterior region is a challenge for most clinicians to achieve optimal esthetics with dental implants. The provisional crown is a key factor in the success of obtaining pink esthetics around restorations with single implants, by soft tissue and inter-proximal papilla shaping. Provisional abutments bring additional costs and make the treatment more expensive. Since one of the aims of the clinician is to reduce costs and find more economic ways to raise patient satisfaction, this paper describes a practical method for chair-side fabrication of non-occlusal loaded provisional crowns used by the authors for several years successfully. Twenty two patients (9 males, 13 females; mean age, 36,72 years) with one missing anterior tooth were treated by using the presented method. Metal definitive abutments instead of provisional abutments were used and provisional crowns were fabricated on the definitive abutments for all of the patients. The marginal fit was finished on a laboratory analogue and temporarily cemented to the abutments. The marginal adaptation of the crowns was evaluated radiographically. The patients were all satisfied with the final appearance and no complications occurred until the implants were loaded with permanent restorations. The use of the definitive abutments for provisional crowns instead of provisional abutments reduces the costs and the same results can be obtained.

Bacterial Adhesion of Porphyromonas Gingivalis on Provisional Fixed Prosthetic Materials

OpenAIRE

Zortuk, Mustafa; Kesim, Servet; Kaya, Esma; Özbilge, Hatice; Kiliç, Kerem; Çölgeçen, Özlem

2010-01-01

Background: When provisional restorations are worn for long term period, the adhesion of bacteria becomes a primary factor in the development of periodontal diseases. The aims of this study were to evaluate the surface roughness and bacterial adhesion of four different provisional fixed prosthodon-tic materials. Methods: Ten cylindrical specimens were prepared from bis-acrylic composites (PreVISION CB and Protemp 3 Garant), a light-polymerized composite (Revotek LC), and a polymethyl metha...

Gingival recontouring by provisional implant restoration for optimal emergence profile: report of two cases.

Science.gov (United States)

Son, Mee-Kyoung; Jang, Hyun-Seon

2011-12-01

The emergence profile concept of an implant restoration is one of the most important factors for the esthetics and health of peri-implant soft tissue. This paper reports on two cases of gingival recontouring by the fabrication of a provisional implant restoration to produce an optimal emergence profile of a definitive implant restoration. After the second surgery, a preliminary impression was taken to make a soft tissue working cast. A provisional crown was fabricated on the model. The soft tissue around the implant fixture on the model was trimmed with a laboratory scalpel to produce the scalloped gingival form. Light curing composite resin was added to fill the space between the provisional crown base and trimmed gingiva. After 4 to 6 weeks, the final impression was taken to make a definitive implant restoration, where the soft tissue and tooth form were in harmony with the adjacent tooth. At the first insertion of the provisional restoration, gum bleaching revealed gingival pressure. Four to six weeks after placing the provisional restoration, the gum reformed with harmony between the peri-implant gingiva and adjacent dentition. Gingival recontouring with a provisional implant restoration is a non-surgical and non-procedure-sensitive method. The implant restoration with the optimal emergence profile is expected to provide superior esthetic and functional results.

DK mini-culotte stenting in the treatment of true coronary bifurcation lesions: a propensity score matching comparison with T-provisional stenting.

Science.gov (United States)

Fan, Lin; Chen, Lianglong; Luo, Yukun; Zhang, Linlin; Zhong, Wenliang; Lin, Chaogui; Chen, Zhaoyang; Peng, Yafei; Zhen, Xingchun; Dong, Xianfeng

2016-03-01

The conventional culotte technique remains not to be widely used for the treatment of coronary bifurcation lesions due to its inherent drawbacks. Here, we developed a double kissing mini-culotte stenting (DK mini-culotte) and assessed its efficacy and safety by a propensity score matching comparison (PSM) with T-provisional stenting. From June 2010 to June 2012, a total of 223 consecutive patients with true coronary bifurcation lesions (TCBLs) were treated with DK mini-culotte (91 patients with 92 lesions) or T-provisional stenting (132 patients with 135 lesions). We performed a PSM to correct the confounders from clinical and lesion's characteristics. The primary endpoint was cumulative major adverse cardiac event (MACE) at 1 year including cardiac death, myocardial infarction, and target vessel revascularization or target lesion revascularization (TVR/TLR). The secondary endpoint was the rate of side branch (SB) restenosis at 12 months. After a PSM, there were 66 patients in each group. Additional SB stenting in the T-provisional group was performed in 10 (15.2 %) lesions. The incidence of 1-year cumulative MACE was 4.55 % for the DK mini-culotte versus 13.6 % for T-provisional stenting (P = 0.127), the rate of TVR/TLR was 1.52 % for DK mini-culotte versus 12.12 % for T-provisional stenting (P = 0.033). The SB binary restenosis rate was 5.6 % in the DK mini-culotte group and 22.4 % in the T-provisional group (P = 0.014). In summary, despite that there is no difference in MACE between groups, DK mini-culotte significantly reduce TVR/TLR and SB restenosis in the treatment of true coronary bifurcation lesions.

Comparative in vitro evaluation of CAD/CAM vs conventional provisional crowns

Directory of Open Access Journals (Sweden)

Adil Othman ABDULLAH

Full Text Available ABSTRACT Objective This study compared the marginal gap, internal fit, fracture strength, and mode of fracture of CAD/CAM provisional crowns with that of direct provisional crowns. Material and Methods An upper right first premolar phantom tooth was prepared for full ceramic crown following tooth preparation guidelines. The materials tested were: VITA CAD-Temp®, Polyetheretherketone “PEEK”, Telio CAD-Temp, and Protemp™4 (control group. The crowns were divided into four groups (n=10, Group1: VITA CAD-Temp®, Group 2: PEEK, Group 3: Telio CAD-Temp, and Group 4: Protemp™4. Each crown was investigated for marginal and internal fit, fracture strength, and mode of fracture. Statistical analysis was performed using GraphPad Prism software version 6.0. Results The average marginal gap was: VITA CAD-Temp® 60.61 (±9.99 µm, PEEK 46.75 (±8.26 µm, Telio CAD-Temp 56.10 (±5.65 µm, and Protemp™4 193.07(±35.96 µm (P0.05. Conclusions CAD/CAM fabricated provisional crowns demonstrated superior fit and better strength than direct provisional crowns.

Technique for making full-coverage provisional restorations on teeth with insufficient clinical crowns.

Science.gov (United States)

Feinberg, Edward

2010-11-01

Provisional restorations fabricated with copper bands are tremendous practice builders, eliminating the sensitivity, recurrent decay and poor retention that are common with conventional temporary restorations. The copper-band provisional restoration is the ideal choice when conventional butt-joint temporary restorations are unsuitable. The technique for making this restoration is demonstrated in this article with a step-by-step "how-to" description. An analysis of the basic principles and theories behind the success of the copper band provisional restoration is also presented, as well as a discussion of the restoration's advantages and disadvantages.

75 FR 26939 - Target Corporation: Provisional Acceptance of a Settlement Agreement and Order

Science.gov (United States)

2010-05-13

... CONSUMER PRODUCT SAFETY COMMISSION [CPSC Docket No. 09-C0037] Target Corporation: Provisional...(e). Published below is a provisionally-accepted Settlement Agreement with Target Corporation..., Target Corporation (``Target '') and the staff (``Staff '') of the United States Consumer Product Safety...

VSRR - Quarterly provisional estimates for infant mortality

Data.gov (United States)

U.S. Department of Health & Human Services — Provisional estimates of infant mortality (deaths of infants under 1 year per 1,000 live births), neonatal mortality (deaths of infants aged 0-27 days per 1,000 live...

Immunosuppression and tolerance after total lymphoid irradiation (TLI)

International Nuclear Information System (INIS)

Strober, S.; Gottlieb, M.; Slavin, S.; King, D.P.; Hoppe, R.T.; Fuks, Z.; Bieber, C.P.; Kaplan, H.S.

1980-01-01

The immunosuppressive effects of total lymphoid irradiation (TLI) in humans and in several species of inbred and outbred laboratory animals have been investigated. A unique property of TLI, the prevention of the graft vs. host disease, was used to induce transplantation tolerance in order to study the mechanism of altered immunity when the celluar basis of the TLI-induced immunosuppression was examined by means of the mixed lymphocyte response (MLR), no suppression of the MLR was observed when spleen cells from unirradiated or whole body-irradiated donors were used instead of donors given TLI. These results indicated that TLI induces a population of cells in the spleen that can nonspecifically suppress the MLR

Occlusal wear of provisional implant-supported restorations

NARCIS (Netherlands)

Santing, Hendrik J.; Kleverlaan, Cornelis J.; Werner, Arie; Feilzer, Albert J.; Raghoebar, Gerry M.; Meijer, Henny J. A.

BACKGROUND: Implant-supported provisional restorations should be resistant to occlusal wear. PURPOSE: The purpose of this laboratory study was to evaluate three-body wear of three indirect laboratory composite resins, five chair side bis-acryl resin-based materials, and two chair side

Creating Esthetic Harmony with Nonloading, Fixed Provisional Restoration using Extracted Teeth after Immediate Implant Placement.

Science.gov (United States)

Satwalekar, Parth; Satwalekar, Tanushree; Bondugula, Vasanthi; Bhuvaneshwari, B; Harshavardhan, K V; Pasula, Kiran

2016-04-01

To make use of fiber-reinforced composite and the patient's own extracted teeth in fabricating a provisional restoration following immediate implant placement. Fiber-reinforced composites offer various possibilities in temporization of osseointegrating implants in the esthetic zone. In this chairside technique, the patient's own extracted teeth with fiber-reinforced composite were used to fabricate a provisional restoration after immediate implant placement. A putty index was made before extracting the teeth and placing the implants as planned. The index and crowns of the extracted teeth were used to make a nonloading, esthetic, chair-side provisional restoration after immediate implant placement. By using the patient's own teeth for pro-visionalization immediately after implant placement, acceptance is greatly enhanced.

Provisional Peer-Reviewed Toxicity Values for Acrolein

Science.gov (United States)

Provisional Peer-Reviewed Toxicity Values (PPRTV) assessments are developed for use by the Agency’s Office of Land and Emergency Management (OLEM) to support informed decisions in the Superfund program and at hazardous waste sites when a values is not available in the Integrated ...

Alleviating gizzard erosion with Hepasan ® - Provisional ...

African Journals Online (AJOL)

Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. DOWNLOAD FULL TEXT Open Access DOWNLOAD FULL TEXT Subscription or Fee Access. Alleviating gizzard erosion with Hepasan® - Provisional Communication. K Boa-Amponsem, A Osei-Somuah. Full Text:.

Provisional Peer-Reviewed Toxicity Values for Aluminum

Science.gov (United States)

Provisional Peer-Reviewed Toxicity Values (PPRTV) assessments are developed for use by the Agency’s Office of Land and Emergency Management (OLEM) to support informed decisions in the Superfund program and at hazardous waste sites when a values is not available in the Integrated ...

Provisional Peer-Reviewed Toxicity Values for Lewisite

Science.gov (United States)

Provisional Peer-Reviewed Toxicity Values (PPRTV) assessments are developed for use by the Agency’s Office of Land and Emergency Management (OLEM) to support informed decisions in the Superfund program and at hazardous waste sites when a values is not available in the Integrated ...

Tolerance to bovine clinical mastitis: Total, direct, and indirect milk losses.

Science.gov (United States)

Detilleux, J

2018-04-01

The objectives of this paper were to estimate direct and indirect milk losses associated with mastitis. Indirect losses, linked to indirect tolerance, are mediated by the increase in milk somatic cell count (SCC) in response to bacterial infection. Direct losses, linked to weak direct tolerance, are not mediated by the increase in SCC. So far, studies have evaluated milk loss associated with clinical mastitis without considering both components, which may lead to biased estimates of their sum; that is, the total loss in milk. A total of 43,903 test-day records on milk and SCC from 3,716 cows and 5,858 lactations were analyzed with mediation mixed models and health trajectories to estimate the amount of direct, indirect, and total milk losses after adjustment for known and potentially unmeasured (sensitivity analyses) confounding factors. Estimates were formalized under the counterfactual causal theory of causation. In this study, milk losses were mostly mediated by an increase in SCC. They were highest in the first month of lactation, when SCC were highest. Milk losses were estimated at 0.5, 0.8, and 1.1 kg/d in first, second, and third and greater parity, respectively. Two phases described how changes in milk were associated with changes in SCC: on average, one occurred before and one after the day preceding the clinical diagnosis. In both phases, changes in milk were estimated at 1 mg/d per 10 3 cells/mL. After adjusting for known confounders, cow effect accounted for 20.7 and 64.2% of the variation in milk in the first and second phases, respectively. This suggests that deviations from the resilient path were highest during the second phase of inflammation and that selection for cows more tolerant to mastitis is feasible. As discussed herein, epigenetic regulation of macrophage polarization may contribute to the variation in milk observed in the second phase. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Evaluation of the Luting Cement Space for Provisional Restoration by using Various Coats of Die Spacer Materials-An Invitro Study.

Science.gov (United States)

Chiramana, Sandeep; Siddineni, Krishna Chaitanya; Jyothula, Ravi Rakesh Dev; Gade, Phani Krishna; Bhupathi, Deepthi; Kondaka, Sudheer; Hussain, Zakir; Paluri, Geetha Bhavani

2014-09-01

The present study was to evaluate the space provided for the temporary luting cement, after the application of various coats of die spacers, during the fabrication of provisional crowns and bridges. A total of 50 specimens of dental stone with provisional crowns on all these samples were prepared and were divided into five groups based on the application of various coats of different die spacers. Later these specimens were sectioned buccolingually and were observed using a stereomicroscope under 100X magnification. The images thus obtained were evaluated and noted for the amount of space between the inner surface of the provisional crown and the specimens at five different locations using Image Pro 6.0 Express software and the values were subjected to one-way ANOVA test, and unpaired t-test. There was a significant increase of luting space thickness with various die spacer applications than the specimens of control group. Specimens of double coat applications of silver and gold die spacers showed higher luting cement space than the separating media application specimens.

45 CFR 264.70 - What makes a State eligible to receive a provisional payment of contingency funds?

Science.gov (United States)

2010-10-01

... provisional payment of contingency funds? 264.70 Section 264.70 Public Welfare Regulations Relating to Public... Contingency Fund? § 264.70 What makes a State eligible to receive a provisional payment of contingency funds? (a) In order to receive a provisional payment of contingency funds, a State must: (1) Be a needy...

Increasing Immunization Compliance by Reducing Provisional Admittance

Science.gov (United States)

Davis, Wendy S.; Varni, Susan E.; Barry, Sara E.; Frankowski, Barbara L.; Harder, Valerie S.

2016-01-01

Students in Vermont with incomplete or undocumented immunization status are provisionally admitted to schools and historically had a calendar year to resolve their immunization status. The process of resolving these students' immunization status was challenging for school nurses. We conducted a school-based quality improvement effort to increase…

Graduate Periodontics Programs' Integration of Implant Provisionalization in Core Curricula: Implementation of CODA Standard 4-10.2.d.

Science.gov (United States)

Barwacz, Christopher A; Pantzlaff, Ed; Allareddy, Veerasathpurush; Avila-Ortiz, Gustavo

2017-06-01

The aim of this descriptive study was to provide an overview of the status of implementation of Commission on Dental Accreditation (CODA) Standard 4-10.2.d (Provisionalization of Dental Implants) by U.S. graduate periodontics programs since its introduction in 2013. Surveys were sent in May 2015 to 56 accredited postdoctoral periodontics program directors to ascertain program director characteristics; status of planning, implementation, and curriculum resulting from adoption of Standard 4-10.2.d; preferred clinical protocols for implant provisionalization; interdisciplinary educational collaborators; and competency assessment mechanisms. The survey response rate was 52% (N=29); the majority were male, aged 55 or older, and had held their position for less than ten years. Among the responding programs, 93% had formal educational curricula established in implant provisionalization. Graduate periodontics (96%) and prosthodontics (63%) faculty members were predominantly involved with curriculum planning. Of these programs, 96% used immediate implant provisionalization, with direct (chairside) provisionalization protocols (86%) being preferred over indirect protocols (14%) and polyethylethylketone provisional abutments (75%) being preferred to titanium (25%) provisional abutments. Straight and concave transmucosal emergence profile designs (46% each) were preferred in teaching, with only 8% of programs favoring convex transmucosal profiles. A majority of responding programs (67%) lacked protocols for communicating to the restorative referral a mechanism to duplicate the mature peri-implant mucosal architecture. Regional location did not play a significant role in any educational component related to implant provisionalization for these graduate periodontal programs. Overall, this study found that a clear majority of graduate periodontics programs had established formal curricula related to implant provisionalization, with substantial clinical and philosophical consensus

Establishing the pharmaceutical quality of Chinese herbal medicine: a provisional BCS classification.

Science.gov (United States)

Fong, Sophia Y K; Liu, Mary; Wei, Hai; Löbenberg, Raimar; Kanfer, Isadore; Lee, Vincent H L; Amidon, Gordon L; Zuo, Zhong

2013-05-06

The Biopharmaceutical Classification System (BCS), which is a scientific approach to categorize active drug ingredient based on its solubility and intestinal permeability into one of the four classes, has been used to set the pharmaceutical quality standards for drug products in western society. However, it has received little attention in the area of Chinese herbal medicine (CHM). This is likely, in part, due to the presence of multiple active components as well as lack of standardization of CHM. In this report, we apply BCS classification to CHMs provisionally as a basis for establishing improved in vitro quality standards. Based on a top-200 drugs selling list in China, a total of 31 CHM products comprising 50 official active marker compounds (AMCs) were provisionally classified according to BCS. Information on AMC content and doses of these CHM products were retrieved from the Chinese Pharmacopoeia. BCS parameters including solubility and permeability of the AMCs were predicted in silico (ACD/Laboratories). A BCS classification of CHMs according to biopharmaceutical properties of their AMCs is demonstrated to be feasible in the current study and can be used to provide a minimum set of quality standards. Our provisional results showed that 44% of the included AMCs were classified as Class III (high solubility, low permeability), followed by Class II (26%), Class I (18%), and Class IV (12%). A similar trend was observed when CHMs were classified in accordance with the BCS class of AMCs. Most (45%) of the included CHMs were classified as Class III, followed by Class II (16%), Class I (10%), and Class IV (6%); whereas 23% of the CHMs were of mixed class due to the presence of multiple individual AMCs with different BCS classifications. Moreover, about 60% of the AMCs were classified as high-solubility compounds (Class I and Class III), suggesting an important role for an in vitro dissolution test in setting quality control standards ensuring consistent

Microleakage of different provisionalization techniques for class I inlays

Directory of Open Access Journals (Sweden)

Selim Erkut

2013-03-01

Conclusion: The microleakage in class I inlay cavities could be reduced by the application of dentin-bonding agents after cavity preparation followed by the placement of light-polymerized provisional restorative materials.

Comparative evaluation of marginal leakage of provisional crowns cemented with different temporary luting cements: In vitro study.

Science.gov (United States)

Arora, Sheen Juneja; Arora, Aman; Upadhyaya, Viram; Jain, Shilpi

2016-01-01

As, the longevity of provisional restorations is related to, a perfect adaptation and a strong, long-term union between restoration and teeth structures, therefore, evaluation of marginal leakage of provisional restorative materials luted with cements using the standardized procedures is essential. To compare the marginal leakage of the provisional crowns fabricated from Autopolymerizing acrylic resin crowns and bisphenol A-glycidyl dimethacrylate (BIS-GMA) resin crowns. To compare the marginal leakage of the provisional crowns fabricated from autopolymerizing acrylic resin crowns and BIS-GMA resin crowns cemented with different temporary luting cements. To compare the marginal leakage of the provisional crowns fabricated from autopolymerizing acrylic resin (SC-10) crowns cemented with different temporary luting cements. To compare the marginal leakage of the provisional crowns fabricated from BIS-GMA resin crowns (Protemp 4) cemented with different temporary luting cements. Freshly extracted 60 maxillary premolars of approximately similar dimensions were mounted in dental plaster. Tooth reduction with shoulder margin was planned to use a customized handpiece-holding jig. Provisional crowns were prepared using the wax pattern fabricated from computer aided designing/computer aided manufacturing milling machine following the tooth preparation. Sixty provisional crowns were made, thirty each of SC-10 and Protemp 4 and were then cemented with three different luting cements. Specimens were thermocycled, submerged in a 2% methylene blue solution, then sectioned and observed under a stereomicroscope for the evaluation of marginal microleakage. A five-level scale was used to score dye penetration in the tooth/cement interface and the results of this study was analyzed using the Chi-square test, Mann-Whitney U-test, Kruskal-Wallis H-test and the results were statistically significant P provisional crowns cemented with three different luting cements along the axial walls of

Evaluation of Vertical Marginal Adaptation of Provisional Crowns by ...

African Journals Online (AJOL)

2018-01-30

Jan 30, 2018 ... Department of Prosthetic Dental Sciences, College of Dentistry, ... discrepancies compared to dimethacrylates, some of ... whereas one study shows bis‑acryl composite resin to .... The provisionals were finished with acrylic.

Development of a provisional essential medicines list for children in Canada: consensus process.

Science.gov (United States)

Woods, Hannah; Oronsaye, Efosa; Bali, Anjli; Rajakulasingam, Yathavan; Lee, Taehoon; Umali, Norman; Cohen, Eyal; Finkelstein, Yaron; Offringa, Martin; Persaud, Nav

2018-03-26

Worldwide, many countries have developed a list of essential medicines for children to improve prescribing. We aimed to create an essential medicines list for children in Canada. We adapted the previously created preliminary list of essential medicines for adults in Canada and the WHO Model List of Essential Medicines for Children to create a provisional list of essential medicines for children in Canada. Canadian clinicians made suggestions for changes. Literature relevant to each suggestion was presented to clinician-scientists, who used a modified nominal group technique to make recommendations on the suggestions. Ontario Public Drug Programs prescription data were reviewed to identify commonly prescribed medications missing from the list. Literature relevant to these medications was shared with a clinician-scientist review panel to determine which should be added, and a revised list was developed. A total of 76 items were removed from the list of essential medicines for adults in Canada because they were not indicated for use in children or were not relevant in the Canadian health care context; 7 medications were added to the child list based on Ontario Public Drugs Programs prescribing data and clinician-scientist review. Suggestions to add, remove or substitute medications were made by peer-reviewers and resulted in removal of 1 medication and replacement of 1 medication. The process produced a provisional list of 67 essential medications for children. A provisional list of 67 essential medicines for children was created through a peer-reviewed, multistep process based on current clinical evidence, Canadian clinical practice guidelines and historical prescribing data. It is publicly posted at http://cleanmeds.ca/. The list should be further developed based on wider input and should be continuously revised based on emerging evidence of the safety and effectiveness of these medicines in all pediatric age groups. Copyright 2018, Joule Inc. or its licensors.

Provisional Peer-Reviewed Toxicity Values for Picric Acid

Science.gov (United States)

Provisional Peer-Reviewed Toxicity Values (PPRTV) assessments are developed for use by the Agency’s Office of Land and Emergency Management (OLEM) to support informed decisions in the Superfund program and at hazardous waste sites when a values is not available in the Integrated ...

Provisional Peer-Reviewed Toxicity Values for O-Aminophenol

Science.gov (United States)

Provisional Peer-Reviewed Toxicity Values (PPRTV) assessments are developed for use by the Agency’s Office of Land and Emergency Management (OLEM) to support informed decisions in the Superfund program and at hazardous waste sites when a values is not available in the Integrated ...

Provisional Peer-Reviewed Toxicity Values for N-Heptane

Science.gov (United States)

Provisional Peer-Reviewed Toxicity Values (PPRTV) assessments are developed for use by the Agency’s Office of Land and Emergency Management (OLEM) to support informed decisions in the Superfund program and at hazardous waste sites when a values is not available in the Integrated ...

Provisional Peer-Reviewed Toxicity Values for Guanidine Nitrate

Science.gov (United States)

Provisional Peer-Reviewed Toxicity Values (PPRTV) assessments are developed for use by the Agency’s Office of Land and Emergency Management (OLEM) to support informed decisions in the Superfund program and at hazardous waste sites when a values is not available in the Integrated ...

Provisional Peer-Reviewed Toxicity Values for Guanidine Chloride

Science.gov (United States)

Provisional Peer-Reviewed Toxicity Values (PPRTV) assessments are developed for use by the Agency’s Office of Land and Emergency Management (OLEM) to support informed decisions in the Superfund program and at hazardous waste sites when a values is not available in the Integrated ...

Provisional Peer-Reviewed Toxicity Values for Diundecyl Phthalate

Science.gov (United States)

Provisional Peer-Reviewed Toxicity Values (PPRTV) assessments are developed for use by the Agency’s Office of Land and Emergency Management (OLEM) to support informed decisions in the Superfund program and at hazardous waste sites when a values is not available in the Integrated ...

Provisional energy balance of France for 2002

International Nuclear Information System (INIS)

2003-01-01

A provisional energy accounting in France for 2002 is presented. Statistical data and diagrams are provided to detail and discuss the economical and energy context, the primary energy consumption, the national production and the energy dependence, the primary energy consumption for each energy source, the sectorial analysis of the energy consumption and the carbon dioxide emissions. (A.L.B.)

VSRR - Quarterly provisional estimates for selected indicators of mortality

Data.gov (United States)

U.S. Department of Health & Human Services — Provisional estimates of death rates. Estimates are presented for each of the 15 leading causes of death plus estimates for deaths attributed to drug overdose, falls...

Provisional host catalogue of Fig wasps (Hymenoptera, Chalcidoidea)

NARCIS (Netherlands)

Wiebes, J.T.

1966-01-01

INTRODUCTION In this catalogue — entitled "provisional" because our knowledge of the subject is still so evidently incomplete — all species of Ficus mentioned as hosts of fig wasps, are listed with the Hymenoptera Chalcidoidea reared from their receptacles. The names used for the Agaonidae are in

Comparative in vitro evaluation of CAD/CAM vs conventional provisional crowns.

Science.gov (United States)

Abdullah, Adil Othman; Tsitrou, Effrosyni A; Pollington, Sarah

2016-01-01

This study compared the marginal gap, internal fit, fracture strength, and mode of fracture of CAD/CAM provisional crowns with that of direct provisional crowns. An upper right first premolar phantom tooth was prepared for full ceramic crown following tooth preparation guidelines. The materials tested were: VITA CAD-Temp®, Polyetheretherketone "PEEK", Telio CAD-Temp, and Protemp™4 (control group). The crowns were divided into four groups (n=10), Group1: VITA CAD-Temp®, Group 2: PEEK, Group 3: Telio CAD-Temp, and Group 4: Protemp™4. Each crown was investigated for marginal and internal fit, fracture strength, and mode of fracture. Statistical analysis was performed using GraphPad Prism software version 6.0. The average marginal gap was: VITA CAD-Temp® 60.61 (±9.99) µm, PEEK 46.75 (±8.26) µm, Telio CAD-Temp 56.10 (±5.65) µm, and Protemp™4 193.07(±35.96) µm (PCAD-Temp® 124.94 (±22.96) µm, PEEK 113.14 (±23.55) µm, Telio CAD-Temp 110.95 (±11.64) µm, and Protemp™4 143.48(±26.74) µm. The average fracture strength was: VITA CAD-Temp® 361.01 (±21.61) N, PEEK 802.23 (±111.29) N, Telio CAD-Temp 719.24 (±95.17) N, and Protemp™4 416.40 (±69.14) N. One-way ANOVA test showed a statistically significant difference for marginal gap, internal gap, and fracture strength between all groups (p0.05). CAD/CAM fabricated provisional crowns demonstrated superior fit and better strength than direct provisional crowns.

Influence of immediate loading on provisional restoration in dental implant stability

Science.gov (United States)

Ikbal, M.; Odang, R. W.; Indrasari, M.; Dewi, R. S.

2017-08-01

The success of dental implant treatment is determined by the primary stability at placement. One factor that could influence this stability is occlusal loading through provisional restoration. Two types of loading protocols are usually used: immediate and delayed loading. However, some controversies remain about the influence of occlusal loading on implant stability. Therefore, the influence of immediate loading on implant stability must be studied. An animal study was conducted by placing nine dental implants in the mandibular jaw of three Macaca fascicularis. Provisional restorations with various occlusal contacts (no, light, and normal contact) were placed on the implant. The implant stability was measured using the Ostell ISQ three times: immediately (baseline) and at the first and second months after implant placement. The implant stability between implants with no and normal occlusal contact as well as light and normal occlusal contact showed significant differences (p implant placement. However, no significant increase (p > 0.05) in implant stability was seen at the baseline and the first and second months after implant placement for all occlusal contact groups. Immediate loading influenced the implant stability, and provisional restoration of implant without occlusal contact showed the highest implant stability.

Cadmium, lead, tin, total mercury, and methylmercury in canned tuna commercialised in São Paulo, Brazil.

Science.gov (United States)

de Paiva, Esther Lima; Morgano, Marcelo Antonio; Milani, Raquel Fernanda

2017-09-01

The objective of this work was to determine levels of inorganic contaminants in 30 samples of five commercial brands of canned tuna, acquired on the local market in Campinas, São Paulo, Brazil, in the year of 2015. Total mercury and methylmercury (MeHg+) were determined by atomic absorption with thermal decomposition and amalgamation; and cadmium, lead, and tin were determined by inductively coupled plasma optical emission spectrometry. Results indicated that 20% of the tuna samples surpassed limits determined by the Brazilian and European Commission legislation for cadmium; for lead, the maximum value found was 59 µg kg -1 and tin was not detected in any samples. The maximum values found for total Hg and MeHg+ were 261 and 258 µg kg -1 , respectively. As from the results obtained, it was estimated that the consumption of four cans per week (540 g) of tuna canned in water could surpass the provisional tolerable monthly intake for MeHg + by 100%.

Total-body irradiation and bone-marrow transplantation - first observations on clinical tolerance

International Nuclear Information System (INIS)

Gocheva, L.; Sergieva, K.; Koleva, I.; Mlachkova, D.; Michailov, G.; Avramova, B.

2004-01-01

About 50 000 bone-marrow transplantations (BMT) are performed annually at the present stage in numerous clinical centers all over the world. The Bulgarian experience in total-body irradiation (TBI) with following BMT is rather scarce. The routine TBI procedures in the oncological practice in the country date back just to 2001. The aim of the present publication is to describe the Bulgarian experience and the first impressions from the clinical tolerance of the total-body irradiation (TBI) with subsequent allogeneic peripheral stem cell transplantation (PSCT). Patient characteristics are presented in detail, including their distribution with respect to sex, age, primary diagnose, recurrence number till BMT, patient status during BMT performance (clinical hematological remission or relapse), as well as the basic parameters of the conditioning regime including TBI with subsequent allogeneic PSCT. The position of the patient and the applied radiotherapeutic equipment are described as well as the TBI schemes, respectively 5 fractions of 2 Gy per day for two patients and 3-day irradiation with 6 fractions (two fractions with a 6-hour interval between them) for the rest of the patients. The total dose (TD) of 10 Gy is realized for all patients. The clinical tolerance of 7 patients subjected to TBI and allogeneic PSCT is discussed. All patients were tolerable to the TBI treatment and had no serious problems. The radiotherapy was interrupted only in the case of the first two patients due to slight gastro-intestinal reactions. The first days of radiation were accompanied with a light degree of headache, nausea and vomiting, which were successfully overcome by granisetron. Diarrhea syndrome and mucositis to the II-III degree were developed subsequently without parotitis development. On the days 0 and +1 of the clinical protocol transplantation was realized of non- T-cell-depleted grafts (in 5 patients) and T-cell-depleted grafts (in 2 patients), which had no serious

10 CFR 903.21 - Completion of rate development; provisional rates.

Science.gov (United States)

2010-01-01

... business principles. The rates shall be submitted promptly to the FERC for confirmation and approval on a..., Southwestern, and Western Area Power Administrations § 903.21 Completion of rate development; provisional rates...

Total fatty acid content of the plasma membrane of Saccharomyces cerevisiae is more responsible for ethanol tolerance than the degree of unsaturation.

Science.gov (United States)

Kim, Hyun-Soo; Kim, Na-Rae; Choi, Wonja

2011-03-01

The effect of change in unsaturated fatty acid composition on ethanol tolerance in Saccharomyces cerevisiae overexpressing ScOLE1 (∆9 fatty acid desaturase gene of S. cerevisiae), CaFAD2 (∆12 fatty acid desaturase gene of Candida albicans), or CaFAD3 (ω3 fatty acid desaturase gene of C. albicans) was examined. ScOLE1 over-expression increased the total unsaturated fatty acid content and enhanced ethanol tolerance, compared with a control strain. In contrast, overexpression of CaFAD2 and CaFAD3, which led to production of linoleic acid (18:2) and α-linolenic acid (18:3), respectively, neither changed total unsaturated fatty acids nor enhanced ethanol tolerance. The total unsaturated fatty acid content rather than the degree of unsaturation is thus an important factor for ethanol tolerance.

Mechanical properties of provisional dental materials: A systematic review and meta-analysis.

Science.gov (United States)

Astudillo-Rubio, Daniela; Delgado-Gaete, Andrés; Bellot-Arcís, Carlos; Montiel-Company, José María; Pascual-Moscardó, Agustín; Almerich-Silla, José Manuel

2018-01-01

Provisional restorations represent an important phase during the rehabilitation process, knowledge of the mechanical properties of the available materials allows us to predict their clinical performance. At present, there is no systematic review, which supports the clinicians' criteria, in the selection of a specific material over another for a particular clinical situation. The purpose of this systematic review and meta-analysis was to assess and compare the mechanical properties of dimethacrylates and monomethacrylates used in fabricating direct provisional restorations, in terms of flexural strength, fracture toughness and hardness. This review followed the PRISMA guidelines. The searches were conducted in PubMed, Embase, Web of Science, Scopus, the New York Academy of Medicine Grey Literature Report and were complemented by hand-searching, with no limitation of time or language up to January 10, 2017. Studies that assess and compare the mechanical properties of dimethacrylate- and monomethacrylate-based provisional restoration materials were selected. A quality assessment of full-text articles were performed according to modified ARRIVE and CONSORT criteria and modified Cochrane Collaboration's tool for in vitro studies. Initially, 256 articles were identified. After removing the duplicates and applying the selection criteria, 24 articles were included in the qualitative synthesis and 7 were included in the quantitative synthesis (meta-analysis). It may be concluded that dimethacrylate-based provisional restorations presented better mechanical behavior than monomethacrylate-based ones in terms of flexural strength and hardness. Fracture toughness showed no significant differences. Within the monomethacrylate group, polymethylmethacrylate showed greater flexural strength than polyethylmethacrylate.

Mechanical properties of provisional dental materials: A systematic review and meta-analysis.

Directory of Open Access Journals (Sweden)

Daniela Astudillo-Rubio

Full Text Available Provisional restorations represent an important phase during the rehabilitation process, knowledge of the mechanical properties of the available materials allows us to predict their clinical performance. At present, there is no systematic review, which supports the clinicians' criteria, in the selection of a specific material over another for a particular clinical situation. The purpose of this systematic review and meta-analysis was to assess and compare the mechanical properties of dimethacrylates and monomethacrylates used in fabricating direct provisional restorations, in terms of flexural strength, fracture toughness and hardness. This review followed the PRISMA guidelines. The searches were conducted in PubMed, Embase, Web of Science, Scopus, the New York Academy of Medicine Grey Literature Report and were complemented by hand-searching, with no limitation of time or language up to January 10, 2017. Studies that assess and compare the mechanical properties of dimethacrylate- and monomethacrylate-based provisional restoration materials were selected. A quality assessment of full-text articles were performed according to modified ARRIVE and CONSORT criteria and modified Cochrane Collaboration's tool for in vitro studies. Initially, 256 articles were identified. After removing the duplicates and applying the selection criteria, 24 articles were included in the qualitative synthesis and 7 were included in the quantitative synthesis (meta-analysis. It may be concluded that dimethacrylate-based provisional restorations presented better mechanical behavior than monomethacrylate-based ones in terms of flexural strength and hardness. Fracture toughness showed no significant differences. Within the monomethacrylate group, polymethylmethacrylate showed greater flexural strength than polyethylmethacrylate.

Total arsenic, mercury, lead, and cadmium contents in edible dried seaweed in Korea.

Science.gov (United States)

Hwang, Y O; Park, S G; Park, G Y; Choi, S M; Kim, M Y

2010-01-01

Total arsenic, mercury, lead, and cadmium contents were determined in 426 samples of seaweed sold in Korea in 2007-08. The average concentrations, expressed in mg kg(-1), dry weight, were: total arsenic 17.4 (less than the limit of detection [LOD] to 88.8), Hg 0.01 (from 0.001 to 0.050), lead 0.7 (less than the LOD to 2.7), and cadmium 0.50 (less than the LOD to 2.9). There were differences in mercury, cadmium, and arsenic content in seaweed between different kinds of products and between coastal areas. The intakes of total mercury, lead, and cadmium for Korean people from seaweed were estimated to be 0.11, 0.65, and 0.45 µg kg(-1) body weight week(-1), respectively. With respect to food safety, consumption of 8.5 g day(-1) of the samples analysed could represent up to 0.2-6.7% of the respective provisional tolerable weekly intakes established by the World Health Organization (WHO). Therefore, even if Korean people have a high consumption of seaweed, this study confirms the low probability of health risks from these metals via seaweed consumption.

Provisional Peer-Reviewed Toxicity Values for Isopropanol (Isobutyl Alcohol)

Science.gov (United States)

Provisional Peer-Reviewed Toxicity Values (PPRTV) assessments are developed for use by the Agency’s Office of Land and Emergency Management (OLEM) to support informed decisions in the Superfund program and at hazardous waste sites when a values is not available in the Integrated ...

Remediation of the Provisional Storage of Radioactive Waste near Zavratec

International Nuclear Information System (INIS)

Zeleznik, N.; Mele, I.

1998-01-01

In 1996 the remediation of the provisional storage situated near village Zavratec in western part of Slovenia started. In this storage radioactive waste contaminated with radium has been stored for many decades The RAO Agency organized remedial works, in which these activities inventorying and repacking of radioactive waste were carried out. Simultaneously with these activities a detailed programme for covering public relations was prepared and implemented. On the basis of the experimental results and general storage conditions relocation of radioactive waste to the Slovenian central storage was recommended and it is planned to be concluded by the end of 1998. In this paper main remedial activities in the provisional storage of radioactive waste near Zavratec are presented. An important and most challenging part of these activities represent PR activities. (author)

Immediate restoration of single tapered implants with nonoccluding provisional crowns: a 5-year clinical prospective study.

Science.gov (United States)

Lang, Lisa A; Turkyilmaz, Ilser; Edgin, Wendell A; Verrett, Ronald; Garcia, Lily T

2014-04-01

Dental literature has limited number of publications regarding long-term outcome data of immediate restoration of single missing teeth with an implant-supported provisional crown. This 5-year study evaluated hard and soft tissue responses to the immediate placement of single implant-supported provisional crowns. Twenty patients received one dental implant restored immediately with a provisional acrylic resin screw-retained crown. Crestal bone loss was evaluated from standardized periapical radiographs collected at 3-month intervals for the first 21 months followed by a 5-year evaluation. Historical controls acquired from available dental literature were used for comparison. One implant failed within 2 months of surgical placement, presenting with pain and mobility. The remaining implants demonstrated no infection, pain, or radiolucencies. Nineteen implants were clinically immobile, osseointegrated, and asymptomatic at 21 months. At 5 years, one patient died, three patients were noncompliant, and 15 implants were evaluated as functional. Mean bone loss (MBL) at 1 year and 21 months was approximately 0.5 ± 0.5 mm and 0.70 ± 0.26 mm at 5 years. There was no statistically significant difference between MBLs at p provisionalization of single dental implants compares favorably with conventional loading protocols. Long-term data suggest that immediate provisionalization of single dental implants is a viable treatment option. © 2012 Wiley Periodicals, Inc.

21 CFR 81.1 - Provisional lists of color additives.

Science.gov (United States)

2010-04-01

... GENERAL SPECIFICATIONS AND GENERAL RESTRICTIONS FOR PROVISIONAL COLOR ADDITIVES FOR USE IN FOODS, DRUGS... not to be construed as a listing for surgical suture use unless color additive petitions have been... the color additive for such use. The color additives listed in paragraphs (a), (b), and (c) of this...

Dietary exposure to aflatoxin B-1, ochratoxin A and fuminisins of adults in Lao Cai province, Viet Nam: A total dietary study approach

DEFF Research Database (Denmark)

Bui, Huong Mai; Le Danh Tuyen; Do Huu Tuan

2016-01-01

Aflatoxins, fumonisins and ochratoxin A that contaminate various agricultural commodities are considered of significant toxicity and potent human carcinogens. This study took a total dietary study approach and estimated the dietary exposure of these mycotoxins for adults living in Lao Cai province...... higher than recommended provisional tolerable daily intake (PTDI) values mainly due to contaminated cereals and meat. The exposure to total fumonisins (1400 ng/kg bw/day) was typically lower than the PTDI value (2000 ng/kg bw/day). The estimated risk of liver cancer associated with exposure to aflatoxin...... B1 was 2.7 cases/100,000 person/year. Margin of exposure (MOE) of renal cancer linked to ochratoxin A and liver cancer associated with fumonisins were 1124 and 1954, respectively indicating risk levels of public health concern. Further studies are needed to evaluate the efficiency of technical...

Effect of nightguard vital bleaching gel on the color stability of provisional restorative materials.

Science.gov (United States)

Bajunaid, Salwa Omar

2016-01-01

To assess the hypothesis that there was no difference in effect of 10% and 15% tooth bleaching agents on color stability of materials used for provisional fixed dental prosthesis. Fifteen samples from two materials used for provisional fixed dental prosthesis: methacrylate-based and composite-based materials and 15 preformed polycarbonate crowns soaked in bleaching gel or distilled water. Spectrophotometer recorded color of specimens at baseline, after 3, 7, and 14 days. Data were statistically analyzed using two-factor ANOVA test to compare the color stability of tested materials. Methyl-based provisional material exhibited statistically higher color change when exposed to 10% and 15% bleaching gel (delta EFNx01: 9.0 and 11.1, respectively) as compared to distilled water (delta EFNx01: 2.9). Delta EFNx01 of composite-based material specimens exposed to distilled water was statistically higher (6.3) than specimens exposed to 10% and 15% bleaching gel (1.5 and 1.1, respectively). Polycarbonate crowns showed a statistically lower color change when exposed to 15% (0.9) than to 10% bleaching gel (5.1) or distilled water (5.5). Composite-based provisional material showed highest color stability when exposed to vital tooth bleaching gel, whereas methacrylate-based material was the least color stable. Polycarbonate crowns were more color stable when exposed to 15% bleaching gel as opposed to 10% bleaching gel.

Acute radiation reactions in oral and pharyngeal mucosa: tolerable levels in altered fractionation schedules

International Nuclear Information System (INIS)

Fowler, Jack F.; Harari, Paul M.; Leborgne, Felix; Leborgne, Jose H.

2003-01-01

Purpose:To investigate whether a predictive estimate can be obtained for a 'tolerance level' of acute oral and pharyngeal mucosal reactions in patients receiving head and neck radiotherapy, using an objective set of dose and time data. Materials and methods:Several dozen radiotherapy schedules for treating head and neck cancer have been reviewed, together with published estimates of whether they were tolerated or (in a number of schedules) not. Those closest to the borderline were given detailed analysis. Total doses and biologically effective doses (BED or ERD) were calculated for a range of starting times of cellular repopulation and rates of daily proliferation. Starting times of proliferation from 5 to 10 days and daily cellular doubling rates of 1-3 days were considered. The standard published form of BED with its linear overall time factor was used: BED=nd1+((d)/(α/β))-((Ln2T-T k )/(αT p )) (see text for parameters). Results: A clear progression from acceptable to intolerable mucosal reactions was found, which correlated with total biologically effective dose (BED in our published modeling), for all the head and neck cancer radiotherapy schedules available for study, when ranked into categories of 'intolerable' or 'tolerable'. A review of published mechanisms for mucosal reactions suggested that practical schedules used for treatment caused stimulated compensatory proliferation to start at about 7 days. The starting time of compensatory proliferation had little predictive value in our listing, so we chose the starting time of 7 days. Very short and very long daily doubling rates also had little reliability, so we suggest choosing a doubling time of 2.5 days as a datum. With these parameters a 'tolerance zone of uncertainty' could be identified which predicted acute-reaction acceptability or not of a schedule within a range of about 2-10 Gy in total BED. If concurrent chemoradiotherapy is used, our provisional suggestion is that this zone should be reduced

Effects of postpolymerization microwave irradiation on provisional dental acrylics: physical and mechanical properties.

Science.gov (United States)

Ozkomur, Ahmet; Fortes, Carmen Beatriz Borges

2016-07-26

This study aimed to evaluate the effects of microwave irradiation on the physical and mechanical properties of poly(methyl methacrylate) (PMMA) provisional resins. Twenty bars and 20 disc-shaped specimens were fabricated for each selected provisional restorative material (Dencor and Duralay). Test groups were subjected to microwave irradiation (3 minutes at 600 W) after polymerization. Bar specimens were subjected to a flexural strength test. Disc-shaped specimens were used to evaluate microhardness. Backscattered Raman spectroscopy was employed for each group to define the degree of conversion of the monomer/polymer. The frequency bands corresponding to C = C and C = O groups were used to determine the conversion of methyl methacrylate (MMA) monomers into polymers. Glass transition temperature was determined using a differential scanning calorimeter. Microwave irradiation of both tested autopolymerizing PMMA provisional materials resulted in a statistically significant increase in microhardness, degree of conversion and glass transition temperature values. Also, the results demonstrated a significant increase in flexural strength after postpolymerization microwave irradiation for the Dencor specimens. It is concluded that mechanical and physical properties are positively influenced by microwave irradiation.

The Provisional Staff Regulations of the Agency

Energy Technology Data Exchange (ETDEWEB)

NONE

1959-06-22

In accordance with Article VII.E of the Statute and of the general principles approved by the General Conference in resolution GC.1(S)/RES/13, the Board of Governors has established 'the terms and conditions on which the Agency's staff shall be appointed, remunerated and dismissed.' The Provisional Staff Regulations thus approved and amended by the Board up to 15 January 1959 are reproduced in this document for the information of all Members of the Agency.

The Provisional Staff Regulations of the Agency

International Nuclear Information System (INIS)

1959-01-01

In accordance with Article VII.E of the Statute and of the general principles approved by the General Conference in resolution GC.1(S)/RES/13, the Board of Governors has established 'the terms and conditions on which the Agency's staff shall be appointed, remunerated and dismissed.' The Provisional Staff Regulations thus approved and amended by the Board up to 15 January 1959 are reproduced in this document for the information of all Members of the Agency

3D printed versus conventionally cured provisional crown and bridge dental materials.

Science.gov (United States)

Tahayeri, Anthony; Morgan, MaryCatherine; Fugolin, Ana P; Bompolaki, Despoina; Athirasala, Avathamsa; Pfeifer, Carmem S; Ferracane, Jack L; Bertassoni, Luiz E

2018-02-01

To optimize the 3D printing of a dental material for provisional crown and bridge restorations using a low-cost stereolithography 3D printer; and compare its mechanical properties against conventionally cured provisional dental materials. Samples were 3D printed (25×2×2mm) using a commercial printable resin (NextDent C&B Vertex Dental) in a FormLabs1+ stereolithography 3D printer. The printing accuracy of printed bars was determined by comparing the width, length and thickness of samples for different printer settings (printing orientation and resin color) versus the set dimensions of CAD designs. The degree of conversion of the resin was measured with FTIR, and both the elastic modulus and peak stress of 3D printed bars was determined using a 3-point being test for different printing layer thicknesses. The results were compared to those for two conventionally cured provisional materials (Integrity ® , Dentsply; and Jet ® , Lang Dental Inc.). Samples printed at 90° orientation and in a white resin color setting was chosen as the most optimal combination of printing parameters, due to the comparatively higher printing accuracy (up to 22% error), reproducibility and material usage. There was no direct correlation between printing layer thickness and elastic modulus or peak stress. 3D printed samples had comparable modulus to Jet ® , but significantly lower than Integrity ® . Peak stress for 3D printed samples was comparable to Integrity ® , and significantly higher than Jet ® . The degree of conversion of 3D printed samples also appeared higher than that of Integrity ® or Jet ® . Our results suggest that a 3D printable provisional restorative material allows for sufficient mechanical properties for intraoral use, despite the limited 3D printing accuracy of the printing system of choice. Copyright © 2017 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Heavy metal, total arsenic, and inorganic arsenic contents of algae food products.

Science.gov (United States)

Almela, C; Algora, S; Benito, V; Clemente, M J; Devesa, V; Súñer, M A; Vélez, D; Montoro, R

2002-02-13

The total arsenic, inorganic arsenic, lead, cadmium, and mercury contents of 18 algae food products currently on sale in Spain were determined. The suitability of the analytical methodologies for this type of matrix was confirmed by evaluating their analytical characteristics. The concentration ranges found for each contaminant, expressed in milligrams per kilogram of dry weight, were as follows: total arsenic, 2.3-141; inorganic arsenic, 0.15-88; lead, mercury, 0.004-0.04. There is currently no legislation in Spain regarding contaminants in algae food products, but some of the samples analyzed revealed Cd and inorganic As levels higher than those permitted by legislation in other countries. Given the high concentrations of inorganic As found in Hizikia fusiforme, a daily consumption of 1.7 g of the product would reach the Provisional Tolerable Weekly Intake recommended by the WHO for an average body weight of 68 kg. A more comprehensive study of the contents and toxicological implications of the inorganic As present in the algae food products currently sold in Spain may be necessary, which might then be the basis for the introduction of specific sales restrictions.

Functional clonal deletion versus active suppression in transplantation tolerance induced by total-lymphoid irradiation

International Nuclear Information System (INIS)

Morecki, S.; Leshem, B.; Weigensberg, M.; Bar, S.; Slavin, S.

1985-01-01

Transplantation tolerance and stable chimerism were established in adult mice conditioned with a short course of total-lymphoid irradiation (TLI) followed by infusion of 30 X 10(6) allogeneic bone marrow cells. Spleen cells of tolerant mice could not exert a proliferative or cytotoxic response against host-type cells in vitro and were unable to induce graft-versus-host reaction in secondary host-type recipients. The degree of suppression assessed by coculturing tolerant splenocytes in vitro in the one-way mixed lymphocyte reaction was quite variable--and, in some cases, was not at all demonstrable, although tolerance was clearly maintained. Suppression, when apparent, could not be ascribed to T lymphocytes. Suppressor cells were found to bind soybean agglutinin and could be separated from the nonsuppressive cells by means of this lectin. Dissociation of the suppressive population (SBA+ cells) from that which is normally alloreactive (SBA- cells) resulted in a suppressor cell-depleted fraction that was still unable to respond to host-type cells but regained reactivity to unrelated cells. Limiting dilution analysis of chimeric splenocytes revealed markedly reduced frequencies of cytotoxic T lymphocyte precursors (CTL-P) directed against host-type cells, as compared with normal splenocytes reacting against the same target cells. This difference was accentuated when these cells were sensitized to host-type target cells prior to plating in limiting dilution cultures. In 1:1 mixing experiments of normal and chimeric splenocytes, there was no evidence of any in vitro suppressive activity to account for hyporeactivity of chimeric cells against host-type cells. Thus, maintenance of TLI-induced tolerance seemed not to be mediated primarily through an active suppressor cell mechanism

The Provisional Staff Regulations of the Agency

Energy Technology Data Exchange (ETDEWEB)

NONE

1975-11-06

The Provisional Staff Regulations of the Agency, as amended up to 19 September 1975 by the Board of Governors, are set forth in this document for the information of all Members of the Agency. When an individual provision of the Regulations and the Annexes thereto has been amended since their approval by the Board in 1957, this is indicated by a footnote giving the date on which the current text became effective. There is a subject index at the end of the document.

The Provisional Staff Regulations of the Agency

International Nuclear Information System (INIS)

1975-01-01

The Provisional Staff Regulations of the Agency, as amended up to 19 September 1975 by the Board of Governors, are set forth in this document for the information of all Members of the Agency. When an individual provision of the Regulations and the Annexes thereto has been amended since their approval by the Board in 1957, this is indicated by a footnote giving the date on which the current text became effective. There is a subject index at the end of the document

Memoranda by A.P. Uspensky to the Council of Ministers of the Provisional Siberian government

OpenAIRE

Sukhanov Aleksandr

2015-01-01

This publication offers a previously unknown memoranda by representative of the diocesan assembly of deputies of the clergy and laity of the Tomsk diocese A. P. Uspensky, addressed to the Council of Ministers of the Provisional Siberian government in July 1918. A.P. Uspensky solicited for formation of the Ministry of confessions in the Provisional Siberian government. Memoranda are initiative documents to the Statute on the Chief Administration of religious denominations adopted by the Council...

The use of definitive implant abutments for the fabrication of provisional crowns: a case series

OpenAIRE

Bilhan, Hakan; Geckili, Onur; Mumcu, Emre

2011-01-01

Purpose The anterior region is a challenge for most clinicians to achieve optimal esthetics with dental implants. The provisional crown is a key factor in the success of obtaining pink esthetics around restorations with single implants, by soft tissue and inter-proximal papilla shaping. Provisional abutments bring additional costs and make the treatment more expensive. Since one of the aims of the clinician is to reduce costs and find more economic ways to raise patient satisfaction, this pap...

Transplantation tolerance after total lymphoid irradiation

Energy Technology Data Exchange (ETDEWEB)

Strober, S.; Slavin, S.; Fuks, Z.; Kaplan, H.S.; Gottlieb, M.; Bieber, C.; Hoppe, R.T.; Grumet, F.C.

1979-03-01

We have presented an animal model of tissue transplantation tolerance using the unusual effects of TLI on the immune system. The application of TLI to bone marrow and whole-organ transplantation in humans merits further study, since TLI offers several advantages over presently used therapeutic modalities. Current regimens used to prepare patients for marrow transplantation are lethal in the absence of allogeneic marrow engraftment, and marrow donors are restricted to HLA-matched siblings due to the danger of GHVD. On the other hand, TLI is a nonlethal procedure that has been used successfully in animals to transplant allogeneic marrow from unmatched donors without the development of GHVD. Thus, TLI might allow for marrow transplantation in all patients with a single sibling, whereas conventional procedures are feasible in only one of four such cases (probability of finding a single HLA-matched sibling). In addition, the induction of transplantation tolerance with TLI would obviate the requirement for the use of maintenance immunosuppressive drugs after whole-organ transplantation. Systemic infections associated with the use of these drugs currently account for the majority of deaths in heart transplant patients. Serious infectious complications associated with TLI are rare; thus this therapeutic regimen may offer considerable improvement in the long-term survival of organ graft recipients as compared to that presently obtained with immunosuppressive drugs.

Fasting gall bladder volume and lithogenicity in relation to glucose tolerance, total and intra-abdominal fat masses in obese non-diabetic subjects

DEFF Research Database (Denmark)

Hendel, H W; Højgaard, L; Andersen, T

1998-01-01

OBJECTIVE: To investigate whether total body fat mass or fat distribution and associated metabolic disturbances in glucose and lipid metabolism influence the well known gallstone pathogenetic factors in obese subjects in order to explain why some obese subjects develop gallstones and some do not...... with a specific radioimmunoassay. Insulin sensitivity was measured by the Minimal Model and glucose tolerance by an oral glucose tolerance test (OGTT). Serum lipid concentrations were measured by standard methods. RESULTS: The gallbladder volume in the fasting state increased with increasing intra-abdominal fat...... mass (P=0.006) and was increased in subjects with impaired glucose tolerance (41 vs 27 ml, P=0.001). The lithogenic index was > 1 in all subjects and correlated with total fat mass (P=0.04). CONCLUSION: Gallstone pathogenesis in obesity seems to be influenced by the total body fat mass and its regional...

Immediate provisional restoration of a single-tooth implant in the esthetic zone: A case report

Directory of Open Access Journals (Sweden)

Po-Sung Fu

2011-02-01

Full Text Available Immediate implant restoration of single implants may demonstrate a positive effect on peri-implant soft tissue. Placement of a provisional restoration following implant surgery can create soft tissue contours that resemble normal gingival topography before placement of the definitive prosthesis. This article describes a staged approach of the mandibular permanent right central incisor, which was congenital missing. The proper space for restoration of the missing incisor was created through orthodontic treatment. The scheduled implant site was reconstructed using autogenous bone harvested from the chin region. After a healing period of four months, an implant was installed with the connection of a fixed provisional crown to a prefabricated temporary abutment. The soft tissue around the implant healed according to the contours of the provisional restoration and the emergence profile was used to duplicate the definitive restoration. Peri-implant esthetics was achieved through the staged approach and immediate restoration of the implant.

Anterior provisional restorations used to determine form, function, and esthetics for complex restorative situations, using all-ceramic restorative systems.

Science.gov (United States)

Reshad, Mamaly; Cascione, Domenico; Kim, Tae

2010-02-01

A technique is proposed for the restoration of a large and visible maxillary anterior defect. The importance of proper diagnosis, treatment planning, and communication is emphasized. Irreversible treatment should only be rendered once patient approval has been obtained through objective evaluation with provisional restorations. The techniques presented in this article use a combination of ceramic systems currently available to satisfy functional demands while achieving acceptable esthetics. A controlled series of steps, where the provisional restorative components are being replaced by the definitive ones is planned. The only difference between the provisional and definitive restorative components is the material used. The definitive restorations consisted of an implant-supported zirconium oxide framework. Individual pressed porcelain restorations were luted to the framework and a natural tooth. CLINICAL SIGNIFICANCE Provisional restorations allow an objective form of communication. Vertical and horizontal transitional lines can be effectively masked with appropriate treatment planning and a skilled ceramist. Many traditional dental laboratory steps may be eliminated or simplified without compromising the definitive restorations.

Memoranda by A.P. Uspensky to the Council of Ministers of the Provisional Siberian government

Directory of Open Access Journals (Sweden)

Sukhanov Aleksandr

2015-06-01

Full Text Available This publication offers a previously unknown memoranda by representative of the diocesan assembly of deputies of the clergy and laity of the Tomsk diocese A. P. Uspensky, addressed to the Council of Ministers of the Provisional Siberian government in July 1918. A.P. Uspensky solicited for formation of the Ministry of confessions in the Provisional Siberian government. Memoranda are initiative documents to the Statute on the Chief Administration of religious denominations adopted by the Council of Ministers of the Russian government on December 27, 1918.

Occupying Iraq: A History of the Coalition Provisional Authority

Science.gov (United States)

2009-01-01

Provisional Authority have pointed guns at CF, including following CF vehicles with their tank tubes .”143 While CPA officials believed that the PKK was a...making loans available to individuals who operate small businesses. In October, CHF International was awarded a $7 million grant for microfinance ...activities in Baghdad Governorate and ACDI/VOCA was given a $5 million grant for microfinance activities in the northern governorates.46 In

VSRR - State and National Provisional Counts for Live Births, Deaths, and Infant Deaths

Data.gov (United States)

U.S. Department of Health & Human Services — NOTES: Figures include all revisions received from the states and, therefore, may differ from those previously published. Data are provisional and are subject to...

Functional clonal deletion versus suppressor cell-induced transplantation tolerance in chimeras prepared with a short course of total-lymphoid irradiation

International Nuclear Information System (INIS)

Slavin, S.; Morecki, S.; Weigensberg, M.; Bar, S.; Weiss, L.

1986-01-01

Allogeneic bone marrow (BM) chimeras induced by infusion of BM cells into recipients conditioned with total lymphoid irradiation (TLI) were shown to develop humoral and cell-mediated tolerance to host and donor-type alloantigens by a number of in vitro and in vivo assays. Spleen cells of tolerant chimeras exhibited suppressive activity of mixed lymphocyte reaction (MLR). MLR suppression was not abrogated by depletion of Lyt-2 cells, and neither could Lyt-2-positive cells sorted from the spleens of tolerant chimeras suppress MLR or attenuate graft-versus-host reactivity in vivo. Likewise, specifically unresponsive spleen cells obtained from chimeras could not be induced to respond in MLR against tolerizing host-type cells following depletion of Lyt-2 or passage through a nylon-wool column. Tolerance of chimera spleen cells to host alloantigens, best documented by permanent survival of donor-type skin allografts, could be adoptively transferred into syngeneic recipients treated by heavy irradiation but not into untreated or mildly irradiated recipients. Adoptive transfer of tolerance seemed to be associated with experimental conditions favoring engraftment of tolerant cells rather than suppression of host reactivity. We speculate that although host and/or donor-derived suppressor cells may be operating in reducing the pool of specific alloreactive clones by blocking cell proliferation in response to allogeneic challenge, the final outcome in tolerant chimeras is actual or functional deletion of alloreactive clones

Immediate placement and provisionalization of maxillary anterior single implant with guided bone regeneration, connective tissue graft, and coronally positioned flap procedures.

Science.gov (United States)

Waki, Tomonori; Kan, Joseph Y K

2016-01-01

Immediate implant placement and provisionalization in the esthetic zone have been documented with success. The benefit of immediate implant placement and provisionalization is the preservation of papillary mucosa. However, in cases with osseous defects presenting on the facial bony plate, immediate implant placement procedures have resulted in facial gingival recession. Subepithelial connective tissue grafts for immediate implant placement and provisionalization procedures have been reported with a good esthetic outcome. Biotype conversion around implants with subepithelial connective tissue grafts have been advocated, and the resulting tissues appear to be more resistant to recession. The dimensions of peri-implant mucosa in a thick biotype were significantly greater than in a thin biotype. Connective tissue graft with coronally positioned flap procedures on natural teeth has also been documented with success. This article describes a technique combining immediate implant placement, provisionalization, guided bone regeneration (GBR), connective tissue graft, and a coronally positioned flap in order to achieve more stable peri-implant tissue in facial osseous defect situations.

20 CFR 404.1592e - How do we determine provisional benefits?

Science.gov (United States)

2010-04-01

... equal to the higher of the benefits payable. (4) If you request reinstatement for more than one benefit..., but are not limited to— (1) If you are a prisoner under § 404.468; (2) If you have been removed... your provisional benefits unless you give us permission. We can recover Medicare premiums you owe from...

Optimized total body irradiation for induction of renal allograft tolerance through mixed chimerism in cynomolgus monkeys

International Nuclear Information System (INIS)

Kimikawa, Masaaki; Kawai, Tatsuo; Ota, Kazuo

1996-01-01

We previously demonstrated that a nonmyeloablative preparative regimen can induce mixed chimerism and renal allograft tolerance between MHC-disparate non-human primates. The basic regimen includes anti-thymocyte globulin (ATG), total body irradiation (TBI, 300 cGy), thymic irradiation (TI, 700 cGy), splenectomy, donor bone marrow (DBM) infusion, and posttransplant cyclosporine therapy (CYA, discontinued after 4 weeks). To evaluate the importance and to minimize the toxicity of irradiation, kidney allografts were transplanted with various manipulations of the irradiation protocol. Monkeys treated with the basic protocol without TBI and TI did not develop chimerism or long-term allograft survival. In monkeys treated with the full protocol, all six monkeys treated with two fractionated dose of 150 cGy developed chimerism and five monkeys appeared tolerant. In contrast, only two of the four monkeys treated with fractionated doses of 125 cGy developed chimerism and only one monkey survived long term. The degree of lymphocyte depletion in all recipients was proportional to the TBI dose. The fractionated TBI regimen of 150 cGy appears to be the most consistently effective regimen for establishing donor bone marrow cell engraftment and allograft tolerance. (author)

Optimized total body irradiation for induction of renal allograft tolerance through mixed chimerism in cynomolgus monkeys

Energy Technology Data Exchange (ETDEWEB)

Kimikawa, Masaaki; Kawai, Tatsuo; Ota, Kazuo [Tokyo Women`s Medical Coll. (Japan)

1996-12-01

We previously demonstrated that a nonmyeloablative preparative regimen can induce mixed chimerism and renal allograft tolerance between MHC-disparate non-human primates. The basic regimen includes anti-thymocyte globulin (ATG), total body irradiation (TBI, 300 cGy), thymic irradiation (TI, 700 cGy), splenectomy, donor bone marrow (DBM) infusion, and posttransplant cyclosporine therapy (CYA, discontinued after 4 weeks). To evaluate the importance and to minimize the toxicity of irradiation, kidney allografts were transplanted with various manipulations of the irradiation protocol. Monkeys treated with the basic protocol without TBI and TI did not develop chimerism or long-term allograft survival. In monkeys treated with the full protocol, all six monkeys treated with two fractionated dose of 150 cGy developed chimerism and five monkeys appeared tolerant. In contrast, only two of the four monkeys treated with fractionated doses of 125 cGy developed chimerism and only one monkey survived long term. The degree of lymphocyte depletion in all recipients was proportional to the TBI dose. The fractionated TBI regimen of 150 cGy appears to be the most consistently effective regimen for establishing donor bone marrow cell engraftment and allograft tolerance. (author)

Evaluation of surface physical properties of acrylic resins for provisional prosthesis

Directory of Open Access Journals (Sweden)

Sérgio Paulo Hilgenberg

2008-09-01

Full Text Available Acrylic resins used for provisional prostheses should have satisfactory superficial characteristics in order to ensure gingival health and low bacterial attachment. The purpose of the present study was to evaluate the superficial roughness and contact angle after two types of polishing and the Vickers hardness of three acrylic resins (Duralay - G1, Dencrilay - G2, and Dencor - G3, all shade 66, indicated for provisional fixed prostheses. Five 20 x 3 ± 1 mm diameter discoid specimens were obtained for each group. One side of the specimens was subjected to standard polishing (pumice and whiting slurry, and the opposite side was polished with special tips. The mean roughness and contact angles of the materials were measured. The specimens were subjected to the Vickers microhardness test, which indicated that standard polishing produced a surface roughness equivalent to that of the special tips. The contact angles obtained with the standard polishing were equivalent to those observed in the special tips group. The microhardness of G1 and G3 resins showed statistical differences.

Prospective evaluation of a new protocol for the provisional use of perfusion imaging with exercise stress testing

Energy Technology Data Exchange (ETDEWEB)

Duvall, W.L. [Hartford Hospital, Division of Cardiology (Henry Low Heart Center), Hartford, CT (United States); Mount Sinai Medical Center, Division of Cardiology (Mount Sinai Heart), New York, NY (United States); Savino, John A.; Levine, Elliot J.; Croft, Lori B.; Henzlova, Milena J. [Mount Sinai Medical Center, Division of Cardiology (Mount Sinai Heart), New York, NY (United States); Hermann, Luke K. [Mount Sinai Medical Center, Department of Emergency Medicine, New York, NY (United States)

2014-11-04

Previous literature suggests that myocardial perfusion imaging (MPI) adds little to the prognosis of patients who exercise >10 metabolic equivalents (METs) during stress testing. With this in mind, we prospectively tested a provisional injection protocol in emergency department (ED) patients presenting for the evaluation of chest pain in which a patient would not receive an injection of radioisotope if adequate exercise was achieved without symptoms and a negative ECG response. All patients who presented to the ED over a 5-year period who were referred for stress testing as part of their ED evaluation were included. Patients considered for a provisional protocol were: exercise stress, age <65 years, no known coronary artery disease, and an interpretable rest ECG. Criteria for not injecting included a maximal predicted heart rate ≥85 %, ≥10 METs of exercise, no anginal symptoms during stress, and no ECG changes. Groups were compared based on stress test results, all-cause and cardiac mortality, follow-up cardiac testing, subsequent revascularization, and cost. A total of 965 patients were eligible with 192 undergoing exercise-only and 773 having perfusion imaging. After 41.6 ± 19.6 months of follow-up, all-cause mortality was similar in the exercise-only versus the exercise plus imaging group (2.6 % vs. 2.1 %, p = 0.59). There were no cardiac deaths in the exercise-only group. At 1 year there was no difference in the number of repeat functional stress tests (1.6 % vs. 2.1 %, p = 0.43), fewer angiograms (0 % vs. 4.0 %, p = 0.002), and a significantly lower cost (65 ± 332 vs 506 ± 1,991, p = 0.002; values are in US dollars) in the exercise-only group. The radiation exposure in the exercise plus imaging group was 8.4 ± 2.1 mSv. A provisional injection protocol has a very low mortality, few follow-up diagnostic tests, and lower cost compared to standard imaging protocols. If adopted it would decrease radiation exposure, save time and decrease health-care costs

Prospective evaluation of a new protocol for the provisional use of perfusion imaging with exercise stress testing.

Science.gov (United States)

Duvall, W Lane; Savino, John A; Levine, Elliot J; Hermann, Luke K; Croft, Lori B; Henzlova, Milena J

2015-02-01

Previous literature suggests that myocardial perfusion imaging (MPI) adds little to the prognosis of patients who exercise >10 metabolic equivalents (METs) during stress testing. With this in mind, we prospectively tested a provisional injection protocol in emergency department (ED) patients presenting for the evaluation of chest pain in which a patient would not receive an injection of radioisotope if adequate exercise was achieved without symptoms and a negative ECG response. All patients who presented to the ED over a 5-year period who were referred for stress testing as part of their ED evaluation were included. Patients considered for a provisional protocol were: exercise stress, age heart rate ≥85%, ≥10 METs of exercise, no anginal symptoms during stress, and no ECG changes. Groups were compared based on stress test results, all-cause and cardiac mortality, follow-up cardiac testing, subsequent revascularization, and cost. A total of 965 patients were eligible with 192 undergoing exercise-only and 773 having perfusion imaging. After 41.6 ± 19.6 months of follow-up, all-cause mortality was similar in the exercise-only versus the exercise plus imaging group (2.6% vs. 2.1%, p = 0.59). There were no cardiac deaths in the exercise-only group. At 1 year there was no difference in the number of repeat functional stress tests (1.6% vs. 2.1%, p = 0.43), fewer angiograms (0% vs. 4.0%, p = 0.002), and a significantly lower cost ($65 ± $332 vs $506 ± $1,991, p = 0.002; values are in US dollars) in the exercise-only group. The radiation exposure in the exercise plus imaging group was 8.4 ± 2.1 mSv. A provisional injection protocol has a very low mortality, few follow-up diagnostic tests, and lower cost compared to standard imaging protocols. If adopted it would decrease radiation exposure, save time and decrease health-care costs without jeopardizing prognosis.

Prospective evaluation of a new protocol for the provisional use of perfusion imaging with exercise stress testing

International Nuclear Information System (INIS)

Duvall, W.L.; Savino, John A.; Levine, Elliot J.; Croft, Lori B.; Henzlova, Milena J.; Hermann, Luke K.

2015-01-01

Previous literature suggests that myocardial perfusion imaging (MPI) adds little to the prognosis of patients who exercise >10 metabolic equivalents (METs) during stress testing. With this in mind, we prospectively tested a provisional injection protocol in emergency department (ED) patients presenting for the evaluation of chest pain in which a patient would not receive an injection of radioisotope if adequate exercise was achieved without symptoms and a negative ECG response. All patients who presented to the ED over a 5-year period who were referred for stress testing as part of their ED evaluation were included. Patients considered for a provisional protocol were: exercise stress, age <65 years, no known coronary artery disease, and an interpretable rest ECG. Criteria for not injecting included a maximal predicted heart rate ≥85 %, ≥10 METs of exercise, no anginal symptoms during stress, and no ECG changes. Groups were compared based on stress test results, all-cause and cardiac mortality, follow-up cardiac testing, subsequent revascularization, and cost. A total of 965 patients were eligible with 192 undergoing exercise-only and 773 having perfusion imaging. After 41.6 ± 19.6 months of follow-up, all-cause mortality was similar in the exercise-only versus the exercise plus imaging group (2.6 % vs. 2.1 %, p = 0.59). There were no cardiac deaths in the exercise-only group. At 1 year there was no difference in the number of repeat functional stress tests (1.6 % vs. 2.1 %, p = 0.43), fewer angiograms (0 % vs. 4.0 %, p = 0.002), and a significantly lower cost (65 ± 332 vs 506 ± 1,991, p = 0.002; values are in US dollars) in the exercise-only group. The radiation exposure in the exercise plus imaging group was 8.4 ± 2.1 mSv. A provisional injection protocol has a very low mortality, few follow-up diagnostic tests, and lower cost compared to standard imaging protocols. If adopted it would decrease radiation exposure, save time and decrease health-care costs

Implant rehabilitation of the atrophic edentulous maxilla including immediate fixed provisional restoration without the use of bone grafting: a review of 1-year outcome data from a long-term prospective clinical trial.

Science.gov (United States)

Toljanic, Joseph A; Baer, Russell A; Ekstrand, Karl; Thor, Andreas

2009-01-01

The literature suggests that predictable integration can be achieved when dental implant placement is combined with immediate fixed provisional restoration in a variety of clinical situations. Fewer data are available, however, regarding outcomes for immediate provisional restoration of implants in the edentulous maxilla. This report presents 1-year data acquired from a long-term prospective clinical trial designed to assess outcomes following the immediate provisional fixed restoration of implants in the atrophic edentulous maxilla without the use of bone augmentation. Fifty-one subjects diagnosed with an atrophic edentulous maxilla received a total of 306 implants (six implants per subject) followed by fixed provisional restoration within 24 hours of implant placement. No subjects underwent grafting to enhance bone volume in preparation for implant treatment. Data acquired included bone quantity and quality, implant dimensions, implant locations, and implant placement stability. Subjects returned for 1-year follow-up examinations to assess implant integration and restoration function. Periapical radiographs were obtained and compared to baseline images to assess marginal bone height maintenance. At the 3-month follow-up examination, 294 of 306 implants placed in 51 subjects were found to be integrated. This represents a cumulative implant survival rate of 96%. At the 1-year follow-up examination, mean marginal bone loss of 0.5 mm was noted, with no further loss of implants. These results support the contention that predictable long-term outcomes may be obtained for the atrophic edentulous maxilla when treated with an implant rehabilitation protocol that includes immediate fixed provisional restoration without the use of bone grafting. This strategy offers a promising treatment alternative for the patient with an atrophic edentulous maxilla.

Provisional reporting of polytrauma CT by on-call radiology registrars. Is it Safe?

Energy Technology Data Exchange (ETDEWEB)

Briggs, R.H., E-mail: robbriggs@hotmail.co.u [Department of Radiology, Leeds General Infirmary, Leeds (United Kingdom); Rowbotham, E.; Johnstone, A.L.; Chalmers, A.G. [Department of Radiology, Leeds General Infirmary, Leeds (United Kingdom)

2010-08-15

Aim: To assess the accuracy of provisional reporting and the impact on patient management. Materials and methods: Over a 6 month period, 137 polytrauma computed tomography (CT) examinations were performed by on-call registrar radiologists at our institution. After exclusions, 130 cases were analysed. Discrepancies between registrar and consultant reports were reviewed and classified as either major or minor dependent on potential impact on patient safety. The relationship between seniority of reporting registrar and likelihood of a missed finding was analysed using the Chi-square test. Results: Of the 130 patients, 46 (35%) had a serious injury, 36 (28%) a minor injury, and 48 (38%) no identifiable injury on CT. There were 32 (25%) patients with discrepancies of which 24 (18%) had missed or significantly under-reported findings and eight (6%) overcalled findings. There were six misses classified as major; the remaining 18 were classified as minor. No association was found between the seniority of reporting registrar and the likelihood of a miss (p = 0.96). Conclusion: The incidence of major discrepancies between the provisional and final report was low and did not lead to any significant clinical deterioration. Our study provides a reference of the commonly missed injuries. We conclude that registrar provisional reporting of polytrauma is safe; however, note that a large proportion of examinations are normal and that further work is required to produce robust criteria given the radiation risk to a young population group scanned in trauma.

Provisional reporting of polytrauma CT by on-call radiology registrars. Is it Safe?

International Nuclear Information System (INIS)

Briggs, R.H.; Rowbotham, E.; Johnstone, A.L.; Chalmers, A.G.

2010-01-01

Aim: To assess the accuracy of provisional reporting and the impact on patient management. Materials and methods: Over a 6 month period, 137 polytrauma computed tomography (CT) examinations were performed by on-call registrar radiologists at our institution. After exclusions, 130 cases were analysed. Discrepancies between registrar and consultant reports were reviewed and classified as either major or minor dependent on potential impact on patient safety. The relationship between seniority of reporting registrar and likelihood of a missed finding was analysed using the Chi-square test. Results: Of the 130 patients, 46 (35%) had a serious injury, 36 (28%) a minor injury, and 48 (38%) no identifiable injury on CT. There were 32 (25%) patients with discrepancies of which 24 (18%) had missed or significantly under-reported findings and eight (6%) overcalled findings. There were six misses classified as major; the remaining 18 were classified as minor. No association was found between the seniority of reporting registrar and the likelihood of a miss (p = 0.96). Conclusion: The incidence of major discrepancies between the provisional and final report was low and did not lead to any significant clinical deterioration. Our study provides a reference of the commonly missed injuries. We conclude that registrar provisional reporting of polytrauma is safe; however, note that a large proportion of examinations are normal and that further work is required to produce robust criteria given the radiation risk to a young population group scanned in trauma.

Biological Effects of Provisional Resin Materials on Human Dental Pulp Stem Cells.

Science.gov (United States)

Jun, S-K; Mahapatra, C; Lee, H-H; Kim, H-W; Lee, J-H

This study investigated the in vitro cytotoxicity as well as the proinflammatory cytokine expression of provisional resin materials on primary cultured human dental pulp stem cells (hDPSCs). Five commercially available provisional resin materials were chosen (SNAP [SN], Luxatemp [LT], Jet [JE], Revotek LC [RL], and Vipi block [VB]). Eluates that were either polymerizing or already set were added to hDPSCs under serially diluted conditions divided into three different setting times (25% set, 50% set, and 100% set) and incubated for 24 hours with 2× concentrated culture media. Cell cytotoxicity tests were performed by LDH assay and live and dead confocal microscope images. The expression of proinflammatory cytokines in SN and VB was measured using cytokine antibody arrays. Data were analyzed using repeated measures analysis of variance (ANOVA) or ANOVA followed by the Tukey post hoc test at a significance level of pprovisional resin materials during polymerization (SN, LT, and JE) were cytotoxic to hDPSCs and may adversely affect pulp tissue.

Evaluation of Total Cardiovascular Risk in Patients with Hypertension and Impaired Glucose Tolerance

Directory of Open Access Journals (Sweden)

I.V. Cherniavska

2016-11-01

Full Text Available Aim. Timely reveal of the patients at high risk of cardiovascular diseases for whom earlier intervention for cardiovascular risk correction is the most effective. Materials and methods. Seventy patients aged 30–55 years old with stage 2 hypertension, impaired glucose tolerance (IGT and high cardiovascular risk were examined according to Framingham criteria. Cardiovascular risk was compared by SCORE and PROCAM results. Results. Percentage ratio of males with high cardiovascular risk was higher by 52.3 % in comparison to females by SCORE and by 2.3 % in comparison to females by PROCAM. Males did not present any significant discrepancy by evaluation of cardiovascular risk by both scores unlike females. Obtained results showed that total cardiovascular risk in females was twofold higher by PROCAM compared to SCORE scale. Conclusions. Total cardiovascular risk level in patients with stage 2 hypertension and IGT is influenced by age, systolic blood pressure level, smoking, lipid storage disease and carbohydrate metabolism disorder. When we evaluate total cardiovascular risk, we should not be limited only by determination of factors determined in SCORE. It is reasonable to evaluate risk factors by PROCAM, too, especially for females.

Esthetic Outcome of Implant Supported Crowns With and Without Peri-Implant Conditioning Using Provisional Fixed Prosthesis: A Randomized Controlled Clinical Trial.

Science.gov (United States)

Furze, David; Byrne, Ashley; Alam, Sonia; Wittneben, Julia-Gabriela

2016-12-01

Achieving an optimal esthetic result using dental implants is challenging. Fixed implant-supported provisional crowns are often used to customize the emergence profile and to individualize the surrounding peri-implant soft tissue. The objective of this study is to evaluate whether the use of a provisional implant-supported crown leads to an esthetic benefit on implants that are placed in the esthetic zone. The null hypothesis is that there is no-difference between the two study groups. Twenty single implants (Bone Level, Straumann AG, Basel, Switzerland) were inserted in consecutive patients. After reopening, a randomization process assigned them to either cohort group 1: a provisional phase with soft tissue conditioning using the "dynamic compression technique" or cohort group 2: without a provisional. Implants were finally restored with an all-ceramic crown. Follow-up examinations were performed at 3 and 12 months including implant success and survival, clinical, and radiographic parameters. After 1 year all implants successfully integrated, mean values of combined modPES and WES were 16.7 for group 1 and 10.5 for Group 2. This was statistically significant. Mean bone loss after 1 year was -0.09 and -0.08 for groups 1 and 2, respectively, without being statistically significant. A provisional phase with soft tissue conditioning does improve the final esthetic result. © 2016 Wiley Periodicals, Inc.

77 FR 42702 - Battat Incorporated, Provisional Acceptance of a Settlement Agreement and Order

Science.gov (United States)

2012-07-20

... reports of magnet liberation and two consumer reports of children ingesting non- magnetized steel balls... request, Staff enclosed two in-depth investigation reports of consumer reports describing magnets... CONSUMER PRODUCT SAFETY COMMISSION [CPSC Docket No. 12-C0007] Battat Incorporated, Provisional...

21 CFR 81.10 - Termination of provisional listings of color additives.

Science.gov (United States)

2010-04-01

... FOODS, DRUGS, AND COSMETICS § 81.10 Termination of provisional listings of color additives. (a) Ext. D&C... has been observed in all groups fed at the 0.5 percent diet and above. (3) Groups of 4 dogs are being... dogs on the 2 percent dosage level died before 32 weeks; the other is living. Three of the dogs on the...

Effect of water temperature on the fit of provisional crown margins during polymerization: An in vitro study

Directory of Open Access Journals (Sweden)

Vivekanandan Ramkumar

2012-01-01

Full Text Available Aim: To evaluate the effect of water temperature on the marginal fit of bis-acrylic composite provisional crown during resin polymerization. Materials and Methods: Precisely machined 10 brass master dies were designed to simulate molar teeth. Five brass dies were selected and precisely machined to simulate all ceramic crown preparation. An acrylic jaw replica was made in which brass dies were arranged equidistant from each other. A custom-made metallic tray was fabricated on the acrylic jaw replica to make polyvinyl siloxane impression matrix. Bis-acrylic composite resin provisional crowns were made using polyvinyl siloxane impression matrix. Provisional crowns were polymerized at room temperature (Group I direct technique, on dental stone cast; Group I indirect technique crowns and at different water temperatures (Group II direct technique crowns. The vertical marginal gap between all the provisional crown margins and the finish line of brass dies was measured using a Research Stereomicroscope System. Results: The results were statistically analyzed using one-way analysis of variance (ANOVA test and Newman-Keul′s test. The results showed that crowns polymerized in 20°C and 30°C water had marginal gap approximately three times smaller than those polymerized in 30°C air, due to the reduced polymerization shrinkage. Conclusion: This study shows that crowns polymerized in 20°C and 30°C water had mean vertical marginal gap approximately three times smaller than those polymerized in 30°C air. It was approximately closer to that of crowns fabricated by indirect technique. Warmer water also supposedly hastens polymerization.

Effect of water temperature on the fit of provisional crown margins during polymerization: An in vitro study.

Science.gov (United States)

Ramkumar, Vivekanandan; Sangeetha, Arunachalam; Kumar, Vinaya

2012-08-01

To evaluate the effect of water temperature on the marginal fit of bis-acrylic composite provisional crown during resin polymerization. Precisely machined 10 brass master dies were designed to simulate molar teeth. Five brass dies were selected and precisely machined to simulate all ceramic crown preparation. An acrylic jaw replica was made in which brass dies were arranged equidistant from each other. A custom-made metallic tray was fabricated on the acrylic jaw replica to make polyvinyl siloxane impression matrix. Bis-acrylic composite resin provisional crowns were made using polyvinyl siloxane impression matrix. Provisional crowns were polymerized at room temperature (Group I direct technique, on dental stone cast; Group I indirect technique crowns) and at different water temperatures (Group II direct technique crowns). The vertical marginal gap between all the provisional crown margins and the finish line of brass dies was measured using a Research Stereomicroscope System. The results were statistically analyzed using one-way analysis of variance (ANOVA) test and Newman-Keul's test. The results showed that crowns polymerized in 20°C and 30°C water had marginal gap approximately three times smaller than those polymerized in 30°C air, due to the reduced polymerization shrinkage. This study shows that crowns polymerized in 20°C and 30°C water had mean vertical marginal gap approximately three times smaller than those polymerized in 30°C air. It was approximately closer to that of crowns fabricated by indirect technique. Warmer water also supposedly hastens polymerization.

38 CFR 17.65 - Approvals and provisional approvals of community residential care facilities.

Science.gov (United States)

2010-07-01

... approvals of community residential care facilities. 17.65 Section 17.65 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Community Residential Care § 17.65 Approvals and provisional approvals of community residential care facilities. (a) An approval of a facility meeting all of...

The Provisional Staff Regulations of the Agency. Amendment to Regulation 5.04(a)

International Nuclear Information System (INIS)

1973-01-01

On 20 February 1973 the Board of Governors approved the substitution of the figure '1500' for '1000' in the second sentence of Provisional Staff Regulation 5.04(a) as set forth in document INFCIRC/6/Rev.2/Mod.1, thus amending that Regulation to read

Investigation on the hematopoietic effect of functional foods using radiation and preparing the provisional product

Energy Technology Data Exchange (ETDEWEB)

Kim, Sung Ho; Oh, Heon; Lee, Song Eun; Jeong, Yong Woon [Chonnam National University, Kwangju (Korea)

1999-04-01

We performed this study to determine the effect of several oriental prescriptions as energy tonic (Chinese medical concept: Bu-Qi) or blood building (Chinese medical concept: Bu-Xie) decoction and its major ingredients on jejunal crypt survival, endogenous spleen colony formation, and apoptosis in jejunal crypt cells of mice irradiated with high and low dose of gamma-irradiation. For the study of evaluation on the biological stability of irradiated chinese medical prescriptions, we performed the experiment to determine the effect of irradiated (10kGy) or unirradiated Si-Wu-Tang, Bu-Zhong-Yi-Qi-Tang and San-Ling-Bai-Shu-San in irradiated mice. Further studies are needed to characterize better the protective nature of the total extract and its ingredients and for preparing the provisional product. (author). 61 refs., 3 figs., 21 tabs.

Characterization and human gingival fibroblasts biocompatibility of hydroxyapatite/PMMA nanocomposites for provisional dental implant restoration

Science.gov (United States)

Zhang, Jingchao; Liao, Juan; Mo, Anchun; Li, Yubao; Li, Jidong; Wang, Xuejiang

2008-11-01

The aim of this study was to determine nHA/PMMA composites (H/P) in an optimal ratio with improved cytocompatibility as well as valid physical properties for provisional dental implant restoration. 20 wt.%, 30 wt.%, 40 wt.% and 50 wt.% H/P were developed and characterized using XPS, bending strength test and SEM. Human gingival fibroblasts cultured in extracts or directly on sample discs were investigated by fluorescent staining and MTT assay. Chemical integration in nHA/PMMA interface was indicated by XPS. Typical fusiform cells with adhesion spots were detected on H/P discs. MTT results also indicated higher cell viability in 30 wt.% and 40 wt.% H/P discs ( P provisional fixed crowns (PFC) is 0.4:1.

Flapless postextraction socket implant placement in the esthetic zone: part 1. The effect of bone grafting and/or provisional restoration on facial-palatal ridge dimensional change-a retrospective cohort study.

Science.gov (United States)

Tarnow, Dennis P; Chu, Stephen J; Salama, Maurice A; Stappert, Christian F J; Salama, Henry; Garber, David A; Sarnachiaro, Guido O; Sarnachiaro, Evangelina; Gotta, Sergio Luis; Saito, Hanae

2014-01-01

The dental literature has reported vertical soft tissue changes that can occur with immediate implant placement, bone grafting, and provisional restoration ranging from a gain or loss of 1.0 mm. However, little is known of the effects of facial-palatal collapse of the ridge due to these clinical procedures. Based upon treatment modalities rendered, an ensuing contour change can occur with significant negative esthetic consequences. The results of a retrospective clinical cohort study evaluating the change in horizontal ridge dimension associated with implant placement in anterior postextraction sockets are presented for four treatment groups: (1) group no BGPR = no bone graft and no provisional restoration; (2) group PR = no bone graft, provisional restoration; (3) group BG = bone graft, no provisional restoration; and (4) group BGPR = bone graft, provisional restoration. Bone grafting at the time of implant placement into the gap in combination with a contoured healing abutment or a provisional restoration resulted in the smallest amount of ridge contour change. Therefore, it is recommended to place a bone graft and contoured healing abutment or provisional restoration at the time of flapless postextraction socket implant placement.

The Provisional Staff Regulations of the Agency. Amendments to Annexes II and III

Energy Technology Data Exchange (ETDEWEB)

NONE

1971-08-06

On 8 June 1971 the Board of Governors made amendments to Annexes II and III to the Provisional Staff Regulations which superseded the earlier amendments to those Annexes set forth in document INFCIRC/6/Rev. 2/Mod. 1. Paragraphs 2-4 of that document are accordingly modified.

Provisional Crown Dislodgement during Scuba Diving: A Case of Barotrauma

OpenAIRE

Gulve, Meenal Nitin; Gulve, Nitin Dilip

2013-01-01

Changes in ambient pressure, for example, during flying, diving, or hyperbaric oxygen therapy, can lead to barotrauma. Although it may seem that this issue was neglected in dental education and research in recent decades, familiarity with and understanding of these facts may be of importance for dental practitioners. We report the case of a patient who experienced barotrauma involving dislodgement of a provisional crown during scuba diving. Patients who are exposed to pressure changes as a pa...

Antonio Maceo: Agent General of the Provisional Revolutionary Government to the Cuban emigration (I

Directory of Open Access Journals (Sweden)

José Antonio Navarro Álvarez

2009-03-01

Full Text Available This article describes the role of paramount importance played by Antonio Maceo y Grajales as General Agent of the Provisional Government, one of the less studied and known roles of this preeminent patriot of our wars of independence.

Comparative Computed Flow Dynamic Analysis of Different Optimization Techniques in Left Main Either Provisional or Culotte Stenting.

Science.gov (United States)

Rigatelli, Gianluca; Dell'Avvocata, Fabio; Zuin, Marco; Giatti, Sara; Duong, Khanh; Pham, Trung; Tuan, Nguyen Si; Vassiliev, Dobrin; Daggubati, Ramesh; Nguyen, Thach

2017-12-01

Provisional and culotte are the most commonly used techniques in left main (LM) stenting. The impact of different post-dilation techniques on fluid dynamic of LM bifurcation has not been yet investigated. The aim of this study is to evaluate, by means of computational fluid dynamic analysis (CFD), the impact of different post-dilation techniques including proximal optimization technique (POT), kissing balloon (KB), POT-Side-POT and POT-KB-POT, 2-steps Kissing (2SK) and Snuggle Kissing balloon (SKB) on flow dynamic profile after LM provisional or culotte stenting. We considered an LM-LCA-LCX bifurcation reconstructed after reviewing 100 consecutive patients (mean age 71.4 ± 9.3 years, 49 males) with LM distal disease. The diameters of LAD and LCX were modelled according to the Finnet's law as following: LM 4.5 mm, LAD 3.5 mm, LCX 2.75 mm, with bifurcation angle set up at 55°. Xience third-generation stent (Abbot Inc., USA) was reconstructed and virtually implanted in provisional/cross-over and culotte fashion. POT, KB, POT-side-POT, POT-KB-POT, 2SK and SKB were virtually applied and analyzed in terms of the wall shear stress (WSS). Analyzing the provisional stenting, the 2SK and KB techniques had a statistically significant lower impact on the WSS at the carina, while POT seemed to obtain a neutral effect. In the wall opposite to the carina, the more physiological profile has been obtained by KB and POT with higher WSS value and smaller surface area of the lower WSS. In culotte stenting, at the carina, POT-KB-POT and 2SK had a very physiological profile; while at the wall opposite to the carina, 2SK and POT-KB-POT decreased significantly the surface area of the lower WSS compared to the other techniques. From the fluid dynamic point of view in LM provisional stenting, POT, 2SK and KB showed a similar beneficial impact on the bifurcation rheology, while in LM culotte stenting, POT-KB-POT and 2SK performed slightly better than the other techniques, probably

Redesign of a fixture mount to be used as an impression coping and a provisional abutment as well

Directory of Open Access Journals (Sweden)

Glenn Hsuan-Chen Chang

2011-01-01

Full Text Available Purpose: An integrated fixture mount/impression coping/ temporary abutment can provide many advantages for immediate loading of dental implants, such as simpler procedure, less chair time, cost reduction, and comfort for the patients. Materials and Methods: A newly designed dental implant fixture mount (DIFMA can be used as an impression coping for taking an immediate impression. An immediate load provisional prosthesis can then be fabricated shortly after implant placement to immediately load the implants. This fixture mount can also serve as a temporary abutment for immediate chair-side fabrication of provisional prosthesis. Two clinical cases are presented. Results: A clinical case utilizing the fixture mount abutment (DIFMA/implant assembly is presented. The precision of fitting between the impression copings and implants is secured with this system. The chair time for taking an immediate impression is greatly reduced. Less cost for the restoration is provided and patient comfort is delivered. Conclusions: More patient satisfaction can be conferred by employing the fixture mount in the process of immediate impression taking and as an immediate provisional abutment.

Effect of nightguard vital bleaching gel on the color stability of provisional restorative materials

Directory of Open Access Journals (Sweden)

Salwa Omar Bajunaid

2016-01-01

Conclusions: Composite-based provisional material showed highest color stability when exposed to vital tooth bleaching gel, whereas methacrylate-based material was the least color stable. Polycarbonate crowns were more color stable when exposed to 15% bleaching gel as opposed to 10% bleaching gel.

Effect of eliminating administrative radiographs on patient exposure and accuracy of provisional treatment plans

International Nuclear Information System (INIS)

Kantor, M.L.; Slome, B.A.

1987-01-01

Published reports and recommendations suggest that radiographs are often ordered because of administrative policies during the screening and selection of patients for dental school clinics. This study examined the prescription of radiographs for two groups of patients: those who were radiographically examined according to an administrative policy and those whose radiographic needs were determined by a clinical examination. The provisional treatment needs assessment based on the screening examination was compared to the final treatment plan based on a complete diagnostic workup for both groups of patients to assess the effect of a change in school policy. Clinicians ordered half the number of panoramic radiographs as would have been ordered by administrative policy. There was no significant difference in the agreement between the provisional and final treatment plans under the two policies. These results suggest that dental schools can comply with federal recommendations against administrative radiographs without compromising patient selection

Serum high molecular weight complex of adiponectin correlates better with glucose tolerance than total serum adiponectin in Indo-Asian males.

Science.gov (United States)

Fisher, F F M; Trujillo, M E; Hanif, W; Barnett, A H; McTernan, P G; Scherer, P E; Kumar, S

2005-06-01

It is well established that total systemic adiponectin is reduced in type 2 diabetic subjects. To date most studies have been concerned with the singular full-length protein or proteolytically cleaved globular domain. It is, however, apparent that the native protein circulates in serum as a lower molecular weight hexamer and as larger multimeric structures of high molecular weight (HMW). In this study we address the clinical significance of each form of the protein with respect to glucose tolerance. Serum was obtained from 34 Indo-Asian male subjects (BMI 26.5+/-3.1; age 52.15+/-10.14 years) who had undertaken a 2-h oral glucose tolerance test. An aliquot of serum was fractionated using velocity sedimentation followed by reducing SDS-PAGE. Western blots were probed for adiponectin, and HMW adiponectin as a percentage of total adiponectin (percentage of higher molecular weight adiponectin [S(A)] index) was calculated from densitometry readings. Total adiponectin was measured using ELISA; leptin, insulin and IL-6 were determined using ELISA. Analysis of the cohort demonstrated that total adiponectin (r = 0.625, p = 0.0001), fasting insulin (r = -0.354, p = 0.040) and age (r = 0.567, p = 0.0001) correlated with S(A). S(A) showed a tighter, inverse correlation with 2-h glucose levels (r = -0.58, p = 0.0003) than total adiponectin (r = -0.38, p = 0.0001). This study demonstrates the importance of the S(A) index as a better determinant of glucose intolerance than measurements of total adiponectin. Our findings suggest that HMW adiponectin is the active form of the protein.

76 FR 6453 - Raynor Marketing, Ltd., Provisional Acceptance of a Settlement Agreement and Order

Science.gov (United States)

2011-02-04

... CONSUMER PRODUCT SAFETY COMMISSION [CPSC Docket No. 11-C0003] Raynor Marketing, Ltd., Provisional..., Raynor Marketing, Ltd. and the staff (``Staff'') of the United States Consumer Product Safety Commission... Street, Suite 205, McLean, VA 22101. Counsel for Raynor Marketing, Ltd. U.S. Consumer Product Safety...

Radiation safety of crew and passengers of air transportation in civil aviation. Provisional standards

Science.gov (United States)

Aksenov, A. F.; Burnazyan, A. I.

1985-01-01

The purpose and application of the provisional standards for radiation safety of crew and passengers in civil aviation are given. The radiation effect of cosmic radiation in flight on civil aviation air transport is described. Standard levels of radiation and conditions of radiation safety are discussed.

Preparation and provisional certification of NBL Spectrographic Impurity Standards, CRM 123 (1-7) and 124 (1-7)

International Nuclear Information System (INIS)

Santoliquido, P.M.

1983-09-01

This report describes the design, production, and provisional certification of two new certified reference materials (CRMs): CRM No. 123 (1-7), U 3 O 8 containing 18 trace elements, and CRM No. 124 (1-7), U 3 O 8 containing 24 trace elements. The elements to be included and concentrations to be used were decided on the basis of information gathered from users of a previous CRM of this type, CRM No. 98 (1-7). The new CRMs were prepared by the addition of trace elements to high purity U 3 O 8 . Provisional certification was accomplished by an interlaboratory program in which four different laboratories analyzed the materials by carrier distillation dc arc emission spectrography

Immediate implant placement and provisionalization with simultaneous guided bone regeneration in the esthetic zone

Directory of Open Access Journals (Sweden)

Chih-Long Chen

2011-03-01

Full Text Available The procedure for immediate implant placement and provisionalization is time-saving, possibly with only one surgical intervention required, although allowing maximal preservation of peri-implant tissues. In this case, we extracted a fractured maxillary right central incisor of a 46-year-old woman with high esthetic expectations, and a transmucosal implant was immediately installed. Simultaneous guided bone regeneration was performed to correct the defects at the facial side of the socket and augment the alveolar ridge horizontally. Primary stability of the implant body and wound closure without tension were confirmed. Connection of a 15° angled abutment and fabrication of a provisional acrylic resin crown without occlusal contact were also completed in the same appointment. After intensive follow-up and soft-tissue molding for 6 months, the customized zirconia abutment and all-ceramic crown were definitively fabricated. During the 18-month follow-up period, the patient was satisfied with the esthetic and functional results.

Valuation of provisional and cultural services of a Ramsar site: A preliminary study on Rudrasagar lake, India

Directory of Open Access Journals (Sweden)

Moitree Taran

2017-01-01

Full Text Available Rudrasagar lake, a Ramsar site in India offers a variety of ecosystem services. The contribution of Rudrasagar lake to the society has not been estimated so far. The preliminary study aims to provide an economic valuation of the provisional and cultural services of the Rudrasagar lake. Official records of revenue collected by the Tourism Department of Tripura and a socio- economic survey was the source of information used in the economic valuation of the lake. The main provisional services provided by the lake are food (aquatic plants and fishes, fuel wood and timber whereas, the cultural services provided were boat raiding and tourism due to its historical importance. The provisioning and cultural services provided by the Rudrasagar lake are 40810 US$ and 33929.33 US$ per year respectively during the period of 2010-2015. The main threats to the wetland identified are increasing silt loads due to deforestation, expansion of agricultural land and land conversion due to population pressure. To alleviate the anthropogenic stress on the lake, better monitoring, planning and management are essential. By proper conservation and management it will be possible to enjoy the provisional and cultural services of the lake in a sustainable way.

Fracture Strength and Failure Mode of Maxillary Implant-Supported Provisional Single Crowns : A Comparison of Composite Resin Crowns Fabricated Directly Over PEEK Abutments and Solid Titanium Abutments

NARCIS (Netherlands)

Santing, H.J.; Meijer, Henny J.A.; Raghoebar, G.M.; Ozcan, M.

2012-01-01

Background: Polyetheretherketone (PEEK) temporary abutments have been recently introduced for making implant-supported provisional single crowns. Little information is available in the dental literature on the durability of provisional implant-supported restorations. Purpose: The objectives of this

75 FR 1356 - RC2 Corporation, Provisional Acceptance of a Settlement Agreement and Order

Science.gov (United States)

2010-01-11

... primarily at toy stores and various retailers nationwide, and secondarily through RC2's e-commerce websites... various retailers nationwide, and secondarily through RC2's e-commerce Web sites or as `sub-components' of...(e). Published below is a provisionally-accepted Settlement Agreement with RC2 Corporation...

Total dietary intake of mercury in the Canary Islands, Spain.

Science.gov (United States)

Rubio, C; Gutiérrez, A; Burgos, A; Hardisson, A

2008-08-01

Estimating the risk associated with dietary intake of heavy metals by consumers is a vital and integral part of regulatory processes. The assessment of exposure to mercury shown in this paper has been performed by means of a study on the whole diet. Total mercury (Hg) levels were determined by cold vapour atomic absorption spectrometry (AAS) in 420 samples of regularly consumed food and drink. The total Hg concentrations measured in the different groups of food ranged from non-detectable to 119 microg kg(-1) w/w. The fish group had the highest concentrations of total Hg. All groups of food with regulated Hg content showed levels that were lower than the legally set values. The food consumption data used in the analysis were taken from the latest nutritional survey made in the Canary Islands, Spain. The estimated total Hg intake of local population (5.7 microg/person day(-1)) did not exceed the provisional tolerable weekly intake (PTWI) limit of 0.3 mg week(-1) of total mercury (43 microg/person day(-1)) fixed by the Joint Food and Agricultural Organization/World Health Organization (FAO/WHO) Expert Committee on Food Additives. Fishery products contributed 96% of the total Hg intake. The mean Hg intake for each island in this archipelago, formed by seven, has also been calculated. Fuerteventura, Lanzarote and El Hierro are the islands with the highest level of Hg intake (7.0, 7,0 and 6.1 microg/person day(-1), respectively). La Palma Island, due to its low fish consumption, had the lowest level of Hg intake (4.5 microg/person day(-1)), followed by La Gomera (5.4 microg/person day(-1)), Tenerife (5.5 microg/person day(-1)) and Gran Canaria (5.6 microg/person day(-1)). A comparison has been made of the results obtained in this study with those found for other national and international communities.

Coronal leakage of provisional restorative materials used in endodontics with and without intracanal medication after exposure to human saliva

Directory of Open Access Journals (Sweden)

P Udayakumar

2016-01-01

Full Text Available Aim: To determine the coronal leakage of various provisional restorations with and without intracanal medication over time after being exposed to human saliva. Materials and Methods: This study investigated Coltosol F, Cavit, Ketac Molar, and IRM as provisional restorative material. Calcium hydroxide and chlorhexidine were used as an intracanal medicament. Ninety-eight single rooted teeth were randomly selected and then mounted in an apparatus that isolated the crown portion of the tooth. Provisional restorative materials were placed in the access cavity following manufacturer guidelines after placement of intracanal medicament. Human saliva and brain heart infusion broth in 3:1 ratio were applied to the samples, incubated at 37°C, and results were tabulated over the course of 4 weeks by the appearance of turbidity in the lower part of the apparatus. Statistical Analysis: The data were statistically analyzed using proportional Z-test. The level of significance was set at 0.05. Results: Coltosol F and Cavit could significantly prevent the bacterial leakage up to a period of 7 days with a P value of 0.01 and 0.005, respectively. Bacterial recontamination was relatively less in the samples treated with intracanal medicaments up to 14 days. After 14 days, however, all materials leaked in over half of the samples. Conclusion: No provisional restorative material can be considered superior in providing a reliable seal after 14 days. Inter-appointments schedule should not extend beyond 2 weeks and after endodontic therapy final restoration should be completed within 1 week.

Comparison of the color stability of provisional restorative materials after storing in different drinks

Directory of Open Access Journals (Sweden)

Merve Bankoğlu Güngör

2016-05-01

Full Text Available OBJECTIVE: The objective of the present study was to compare the color stability of provisional restorative materials after stroring in different drinks. MATERIALS AND METHOD: Thirty specimens (10 mm in diameter and 2 mm in thickness were prepared from three different materials (Temdent, TRIAD ve TelioCAD. Specimens were divided into six groups according to drinks (distilled water, coffee, tea, cola, red wine and fruit juice; n=5. Specimens were stored in these drinks at 37 °C for 48 hours. The L*, a*, b* values of the specimens were measured with a spectrophometer and recorded before and after storing in drinks. Then ΔE* values were calculated. The data were statistically analyzed using two-way analysis of variance (ANOVA and Tukey’s HSD post hoc tests (α=0.05. RESULTS: Difference between the ΔE* values of specimens stored in different drinks was statistically significant (p<0.05. Color change of TelioCAD specimens was smallest in cola drink and greatest in red wine. Color change of Temdent specimens was smallest in fruit juice and greatest in coffee. For TRIAD specimens, greater color change was observed in coffee, red wine, and tea, in descending order. When the results of storing in the same drink were compared, TRIAD showed the greatest values of color change in coffee and red wine in comparison to the other provisional materials (p<0.05. CONCLUSION: Color stability changed according to the type of the provisional material and the drink. When the drinks were evaluated, greater color changes were observed in coffee, and when the materials were evaluated greater color changes were observed in TRIAD.

Immediate Implant Placement and Provisionalization Using the Patient's Extracted Crown: 12-Month Follow-Up.

Science.gov (United States)

Deliberador, Tatiana Miranda; Begnini, Gilmar José; Tomazinho, Flávia; Rezende, Carlos Eduardo Edwards; Florez, Fernando Luis Esteban; Leonardi, Denise Piotto

2018-03-01

Immediate placement and provisionalization of implants in fresh sockets has been previously demonstrated to be a predictable treatment in the restoration of non-recoverable teeth in the anterior regions of the maxilla. This article reports a clinical case in which an immediate implant placement protocol was used in combination with two distinct and sequential grafts (bovine bone and connective tissue, respectively) followed by immediate implant provisionalization using the patient's crown of an extracted tooth. Physical, clinical, and image examinations of the patient (female, 23 years old) revealed a maxillary central incisor (tooth No. 8) with slight mobility due the presence of extensive cervical resorption. The treatment proposed was the atraumatic extraction of the tooth followed by immediate implant placement and provisionalization. Two grafts (bovine bone and connective tissue) were used due to the presence of a very thin maxillary bone plate associated with a thin gingival biotype. The use of the extracted crown as a temporary crown after immediate implant placement resulted in immediate attainment of an esthetically pleasing outcome and long-term favorable results. The treatment protocol proposed can be efficiently used to immediately restore the patient's esthetics and function while maintaining the health, volume, and contours of gingival tissues over a 12-month follow-up period. Anterior teeth extractions typically require the execution of single-unit prostheses using dental materials of synthetic origin (such as polymers), which often are incapable of achieving the esthetic and physiological results patients expect. The use of the patient's own crown was demonstrated, which allowed good clinical results to be achieved and the natural shape and function of tissues to be maintained.

76 FR 61042 - Modification of Regulations Regarding the Practice of Accepting Bonds During the Provisional...

Science.gov (United States)

2011-10-03

... Department of Commerce (the Department) is amending its regulations governing the effect of an affirmative... that explains the effects of an affirmative preliminary determination). This amendment reflects the... no hierarchy between cash and bond requirements for provisional measures, and that allowing the...

Maintenance of marginal bone support and soft tissue esthetics at immediately provisionalized OsseoSpeed implants placed into extraction sites: 2-year results.

Science.gov (United States)

Noelken, Robert; Neffe, Bettina Anna; Kunkel, Martin; Wagner, Wilfried

2014-02-01

Placement of implants into extraction sockets targets the maintenance of peri-implant hard and soft tissue structures and the support of a natural and esthetic contour. The main advantages of immediate implant insertion in comparison with delayed implant placement protocols are as follows: a reduced treatment time, less number of sessions, and, thus, the less invasive procedure. This study examines the clinical performance (survival rate, marginal bone levels and Pink Esthetic Score [PES]) of OsseoSpeed implants placed into extraction sockets with immediate provisionalization in the anterior maxilla after a follow-up of at least 12 months. Twenty patients received a total number of 37 OsseoSpeed implants which were immediately inserted into extraction sockets with or without facial bone deficiencies of various dimensions. A flapless procedure was applied, and the implants were immediately provisionalized with temporary crowns without occlusal contacts. Facial gaps between implant surface and facial bone or the previous contour of the alveolar process were grafted with autogenous bone chips. Implants in diameters 3.5, 4.0, 4.5, and 5.0 with lengths of 11-17 mm were used in the study. During the course of the study, interproximal marginal bone levels, the thickness of the facial bony wall, implant success rate according to the criteria established by Buser, and the PES were assessed per implant. One patient with three implants did not continue the study after prosthesis delivery, the remaining 34 implants were still in function at the final follow-up (survival rate: 100%). The mean follow-up period was 27 months (range, 12-40 months). Marginal bone height at the level of the implant shoulder averaged -0.1 ± 0.55 mm (range, -1.25 to 1.47 mm) at the final follow-up. The mean PES ratings were 11.3 ± 1.8 (range, 6-14) at the final follow-up. In 78% of the patients, the PES was preserved or even improved. Success rates, marginal bone levels, and esthetic results suggest

76 FR 58784 - Bad Boy Enterprises, LLC, Provisional Acceptance of a Settlement Agreement and Order

Science.gov (United States)

2011-09-22

... CONSUMER PRODUCT SAFETY COMMISSION [CPSC Docket No. 11-C0011] Bad Boy Enterprises, LLC... 1118.20(e). Published below is a provisionally-accepted Settlement Agreement with Bad Boy Enterprises..., Bad Boy Enterprises, LLC (``Bad Boy'') and staff (``Staff'') of the United States Consumer Product...

Provisional-Ideal-Point-Based Multi-objective Optimization Method for Drone Delivery Problem

Science.gov (United States)

Omagari, Hiroki; Higashino, Shin-Ichiro

2018-04-01

In this paper, we proposed a new evolutionary multi-objective optimization method for solving drone delivery problems (DDP). It can be formulated as a constrained multi-objective optimization problem. In our previous research, we proposed the "aspiration-point-based method" to solve multi-objective optimization problems. However, this method needs to calculate the optimal values of each objective function value in advance. Moreover, it does not consider the constraint conditions except for the objective functions. Therefore, it cannot apply to DDP which has many constraint conditions. To solve these issues, we proposed "provisional-ideal-point-based method." The proposed method defines a "penalty value" to search for feasible solutions. It also defines a new reference solution named "provisional-ideal point" to search for the preferred solution for a decision maker. In this way, we can eliminate the preliminary calculations and its limited application scope. The results of the benchmark test problems show that the proposed method can generate the preferred solution efficiently. The usefulness of the proposed method is also demonstrated by applying it to DDP. As a result, the delivery path when combining one drone and one truck drastically reduces the traveling distance and the delivery time compared with the case of using only one truck.

Serum lipid profiles, total tract nutrient digestibility, and gastrointestinal tolerance by dogs of α-cyclodextrin.

Science.gov (United States)

Guevara, M A; Bauer, L L; Garleb, K A; Fahey, G C; de Godoy, M R C

2015-05-01

The objectives were to quantify gastrointestinal tolerance, total tract nutrient digestibility, and serum lipid profiles of dogs as affected by α-cyclodextrin (ACD) supplementation and to validate the accuracy of fat analyses techniques using novel ACD-fat complexes. The ACD was hydrolyzed and free sugars and hydrolyzed monosaccharides were quantified using high performance liquid chromatography. Known amount of fats were complexed with ACD, and fat content of complexes were determined using the ether extraction and acid-hydrolyzed fat methods. Nine mixed-breed hounds were used in a crossover design with 3 periods of 10 d each, including 6 d for diet adaptation and 4 d for fecal collection. Dogs were fed twice daily a diet with poultry byproduct meal and brewer's rice as the main ingredients, and chromic oxide (0.2%) was included as a digestion marker. Dogs were supplemented with either 0, 3, or 6 g of ACD diluted in 15 mL of water twice per day for a total of 0, 6, and 12 g ACD per day. The ACD had a very low free sugar concentration and, once hydrolyzed, released only glucose, as expected. Average daily food intake, fecal output (DM basis), and fecal scores were not significantly different among treatments. Body weight and condition score and serum triglycerides and cholesterol concentrations remained unaltered throughout the duration of the experiment. Dry matter, OM, and fat digestibility coefficients were lower (P < 0.05) for both treatment groups compared to the control. The acid-hydrolyzed fat method was valid to measure fat that was bound to ACD. Intake of ACD lowered fat digestibility somewhat but not to the extent previously reported, without affecting serum lipid concentrations or outcomes related to tolerance. Therefore, ACD supplementation resulted in a small decrease in fat digestibility, but ACD supplementation might have potential in modifying serum lipid profiles.

Immediate implant placement and provisional crown fabrication after a minimally invasive extraction of a peg-shaped maxillary lateral incisor: a clinical report.

Science.gov (United States)

Turkyilmaz, Ilser; Suarez, Jose Carlos; Company, Andrea M

2009-09-01

The aim of this case report is to describe the replacement of a maxillary peg-shaped lateral incisor with the placement of an immediate implant and a provisional restoration following a minimally invasive extraction to preserve anterior esthetics. Extraction sites in the anterior maxilla can present restorative challenges with regard to esthetics. Resistance to wearing a temporary removable partial denture during healing makes immediate implant therapy an appealing alternative to patients. Implant placement into fresh extraction sockets using no flap elevation has recently become more popular due to some advantages including less bleeding, swelling, and the preservation of existing soft tissue contours. A 20-year-old woman with a peg-shaped maxillary left lateral incisor was treated using an implant placed into the fresh extraction socket using a flapless approach and immediate provisional crown fabrication. Flapless implant placement helps to preserve site morphology by protecting and supporting existing hard and soft tissues while minimizing surgical trauma to the adjacent tissues. Using a previously fabricated acrylic index, a provisional acrylic crown was fabricated on the adjusted temporary abutment and delivered to the patient the same day during the extraction visit. This report describes the diagnosis and treatment of an over-prepared peg-shaped maxillary left lateral incisor associated with multiple crown decementations. The tooth was extracted without flap elevation and an implant was inserted immediately using flapless surgery and placement of an immediate provisional single crown. Flapless implant insertion into fresh extraction sockets and placement of immediate provisional crowns in cases involving the maxillary anterior region represent a viable treatment option in appropriate clinical situations where esthetics are a high priority. The strategy preserves optimum gingival contours and papillary height may be a viable option compared to fixed partial

76 FR 23225 - Modification of Regulations Regarding the Practice of Accepting Bonds During the Provisional...

Science.gov (United States)

2011-04-26

... online at http://www.Regulations.gov and on the Department's Web site at http://www.trade.gov/ia/ . Any questions concerning file formatting, document conversion, access on the Internet, or other electronic... system, for the provisional measure period an estimated antidumping or countervailing duty rate is...

Examining the provisional guidelines for weight gain in twin pregnancies: a retrospective cohort study.

Science.gov (United States)

Lutsiv, Olha; Hulman, Adam; Woolcott, Christy; Beyene, Joseph; Giglia, Lucy; Armson, B Anthony; Dodds, Linda; Neupane, Binod; McDonald, Sarah D

2017-09-29

Weight gain during pregnancy has an important impact on maternal and neonatal health. Unlike the Institute of Medicine (IOM) recommendations for weight gain in singleton pregnancies, those for twin gestations are termed "provisional", as they are based on limited data. The objectives of this study were to determine the neonatal and maternal outcomes associated with gaining weight below, within and above the IOM provisional guidelines on gestational weight gain in twin pregnancies, and additionally, to explore ranges of gestational weight gain among women who delivered twins at the recommended gestational age and birth weight, and those who did not. A retrospective cohort study of women who gave birth to twins at ≥20 weeks gestation, with a birth weight ≥ 500 g was conducted in Nova Scotia, Canada (2003-2014). Our primary outcome of interest was small for gestational age (gain were used to categorize women as gaining below, within, or above guidelines. We performed traditional regression analyses for maternal outcomes, and to account for the correlated nature of the neonatal outcomes in twins, we used generalized estimating equations (GEE). A total of 1482 twins and 741 mothers were included, of whom 27%, 43%, and 30% gained below, within, and above guidelines, respectively. The incidence of small for gestational age in these three groups was 30%, 21%, and 20%, respectively, and relative to gaining within guidelines, the adjusted odds ratios were 1.44 (95% CI 1.01-2.06) for gaining below and 0.92 (95% CI 0.62-1.36) for gaining above. The gestational weight gain in women who delivered twins at 37-42 weeks with average birth weight ≥ 2500 g and those who delivered twins outside of the recommend ranges were comparable to each other and the IOM recommendations. While gestational weight gain below guidelines for twins was associated with some adverse neonatal outcomes, additional research exploring alternate ranges of gestational weight gain in twin

Agitation in cognitive disorders:International Psychogeriatric Association provisional consensus clinical and research definition

OpenAIRE

Cummings, Jeffrey; Mintzer, Jacobo; Brodaty, Henry; Sano, Mary; Banerjee, Sube; Devanand, D. P.; Gauthier, Serge; Howard, Robert; Lanctôt, Krista; Lyketsos, Constantine G.; Peskind, Elaine; Porsteinsson, Anton P.; Reich, Edgardo; Sampaio, Cristina; Steffens, David

2015-01-01

Background: Agitation is common across neuropsychiatric disorders and contributes to disability, institutionalization, and diminished quality of life for patients and their caregivers. There is no consensus definition of agitation and no widespread agreement on what elements should be included in the syndrome. The International Psychogeriatric Association formed an Agitation Definition Work Group (ADWG) to develop a provisional consensus definition of agitation in patients with cognitive diso...

The Paediatric Rheumatology International Trials Organisation provisional criteria for the evaluation of response to therapy in juvenile dermatomyositis

DEFF Research Database (Denmark)

Ruperto, Nicolino; Pistorio, Angela; Ravelli, Angelo

2010-01-01

To develop a provisional definition for the evaluation of response to therapy in juvenile dermatomyositis (DM) based on the Paediatric Rheumatology International Trials Organisation juvenile DM core set of variables....

Transplantation tolerance in primates following total lymphoid irradiation and allogeneic bone marrow injection. II. Renal allographs

International Nuclear Information System (INIS)

Myburgh, J.A.; Smit, J.A.; Hill, R.R.H.; Browde, S.

1980-01-01

A modified regimen of fractionated total lymphoid irradiation and allogeneic bone marrow (BM) injection in chacma baboons produced transplantation tolerance for allografted kidneys from the BM donors, and substantial chimerism without evidence of graft-versus-host disease. Increasing the dose of nucleated BM cells injected 4-fold over that used in liver transplantation resulted consistently in normal graft function in the early weeks after transplantation. Bone marrow injection and challenge with renal allografts could be delayed for at least 3 weeks after completion of irradiation. If it can be shown that this period can be extended even further, the protocols will be relevant to the circumstances of clinical cadaveric renal transplantation

Fracture strength and failure mode of maxillary implant-supported provisional single crowns: a comparison of composite resin crowns fabricated directly over PEEK abutments and solid titanium abutments.

Science.gov (United States)

Santing, Hendrik Jacob; Meijer, Henny J A; Raghoebar, Gerry M; Özcan, Mutlu

2012-12-01

Polyetheretherketone (PEEK) temporary abutments have been recently introduced for making implant-supported provisional single crowns. Little information is available in the dental literature on the durability of provisional implant-supported restorations. The objectives of this study were to evaluate the fracture strength of implant-supported composite resin crowns on PEEK and solid titanium temporary abutments, and to analyze the failure types. Three types of provisional abutments, RN synOcta Temporary Meso Abutment (PEEK; Straumann), RN synOcta Titanium Post for Temporary Restorations (Straumann), and Temporary Abutment Engaging NobRplRP (Nobel Biocare) were used, and provisional screw-retained crowns using composite resin (Solidex) were fabricated for four different locations in the maxilla. The specimens were tested in a universal testing machine at a crosshead speed of 1 mm/minute until fracture occurred. The failure types were analyzed and further categorized as irreparable (Type 1) or reparable (Type 2). No significant difference was found between different abutment types. Only for the position of the maxillary central incisor, composite resin crowns on PEEK temporary abutments showed significantly lower (p Provisional crowns on PEEK abutments showed similar fracture strength as titanium temporary abutments except for central incisors. Maxillary right central incisor composite resin crowns on PEEK temporary abutments fractured below the mean anterior masticatory loading forces reported to be approximately 206 N. © 2010 Wiley Periodicals, Inc.

Identification of Influence of Part Tolerances of 3PWR-SE Pump On Its Total Efficiency Taking Into Consideration Multi-Valued Logic Trees

Directory of Open Access Journals (Sweden)

Deptuła Adam

2017-03-01

Full Text Available This paper presents the way of identifying the influence of the tolerance of model pumps (TYPE 3PWR-SE construction on the total efficiency. The identification of sensitive control dimensions (Value/Tolerance of examined pumps has been made by means of the multi-valued logic and inductive decision trees. In order to confirm the obtained results, multiple-valued logic trees have been used in the paper according to algorithms for the minimization of individual logic functions. What is more, a specific monotonicity of values of the most key parameters has been determined for the investigated set of pumps having individual specification numbers.

78 FR 36571 - North American Datum of 1983 (NAD 83) Outer Continental Shelf (OCS) Provisional Official...

Science.gov (United States)

2013-06-18

... DEPARTMENT OF THE INTERIOR Bureau of Ocean Energy Management [MMAA104000] North American Datum of 1983 (NAD 83) Outer Continental Shelf (OCS) Provisional Official Protraction Diagram (OPDs) AGENCY... OPDs. SUMMARY: Notice is hereby given that effective with this publication two NAD 83-based OCS...

The success rate of narrow body implants used for supporting immediate provisional restorations: a pilot feasibility study.

Science.gov (United States)

Wang, Hom-Lay; Okayasu, Kozue; Fu, Jia-Hui; Hamerink, Howard A; Layher, Mary G; Rudek, Ivan Elimar

2012-12-01

Implants were first designed to be used in the reconstruction of edentulous mandibles. However, with the technological advancement, enormous changes were made to improve the implant design and surface characteristics leading to the wide use of implants in the replacement of missing teeth. During the transition from an edentulous span to a fixed prosthesis, narrow body implants (NBIs) have been proposed to enhance patient comfort and function. Therefore, this study was aimed at investigating the survival and success rates of NBIs used for supporting immediately nonfunctional loaded provisional fixed partial denture (PFPD). Either 2.2- or 2.4-mm-diameter dental implants were placed transmucosally into the edentulous ridges of 10 partially edentulous patients. PFPD of self-cured bis-acryl composite material were made using either a vacuform template chairside or a relined prefabricated PFPD. Occlusal adjustments were made to ensure that there was no functional loading on the provisional restorations before they were secured onto the transitional implants. At 1 year, the implant success and survival rates were 38.7% and 93.5%, respectively, with a mean percentage of bone loss of 9.46% (0%-40%) and a mean bone loss of 1.19 mm (range: 0-3.5 mm). With a favorable implant survival rate, the use of NBIs to support provisional restorations seemed to be a feasible treatment option. In addition, there is merit for research on the long-term use of NBIs-supported final prostheses.

Clinical performance of provisional screw-retained metal-free acrylic restorations in an immediate loading implant protocol: a 242 consecutive patients' report.

Science.gov (United States)

Suarez-Feito, Jose-María; Sicilia, Alberto; Angulo, Jorge; Banerji, Subir; Cuesta, Isabel; Millar, Brian

2010-12-01

To evaluate the clinical performance of provisional screw-retained metal-free acrylic restorations in an immediate loading implant protocol. Two hundred and forty-two consecutive patients were selected retrospectively, who received 1011 implants and 311 immediate provisional screw-retained implant restorations (2-4 h after implant surgery). The patients were monitored for a period of 2-3 months, until they were referred for a final restoration. The primary variables recorded include the survival time and the appearance of fractures in the provisional restoration, and the independent variables included age, sex, dental arch, type of restoration, type of attachment and components used, as well as cantilevers and opposing dentition. A survival analysis (Kaplan-Meier) and a Cox regression analysis were performed. Twenty-three restorations in 20 patients (8.26%, 95% CI 4.8-11.7) showed at least one fracture (7.39%). More than half of the new fractures (52%, 12 cases) occurred in the first 4 weeks. The cumulative survival probability observed was greater in mandible (P=0.05) and non-cantilever restorations (P=0.001), and in those opposed by full restorations or natural teeth (P=0.001). With an opposing implant-supported prosthesis, the risk of fracture was multiplied by 4.7, and the use of cantilevers as well as the location of the restoration in the maxilla multiply the risk by 3.4-3.5. Immediate provisional screw-retained metal-free implant-supported restorations can be considered a reliable restoration (92.6% remain intact) for the healing period of 3 months. © 2010 John Wiley & Sons A/S.

Tolerance Levels of Roadside Trees to Air Pollutants Based on Relative Growth Rate and Air Pollution Tolerance Index

Directory of Open Access Journals (Sweden)

SULISTIJORINI

2008-09-01

Full Text Available Motor vehicles release carbon monoxide, nitrogen dioxide, sulphur dioxide, and particulate matters to the air as pollutants. Vegetation can absorb these pollutants through gas exchange processes. The objective of this study was to examine the combination of the relative growth rate (RGR and physiological responses in determining tolerance levels of plant species to air pollutants. Physiological responses were calculated as air pollution tolerance index (APTI. Eight roadside tree species were placed at polluted (Jagorawi highway and unpolluted (Sindangbarang field area. Growth and physiological parameters of the trees were recorded, including plant height, leaf area, total ascorbate, total chlorophyll, leaf-extract pH, and relative water content. Scoring criteria for the combination of RGR and APTI method was given based on means of the two areas based on two-sample t test. Based on the total score of RGR and APTI, Lagerstroemia speciosa was categorized as a tolerant species; and Pterocarpus indicus, Delonix regia, Swietenia macrophylla were categorized as moderately tolerant species. Gmelina arborea, Cinnamomum burmanii, and Mimusops elengi were categorized as intermediate tolerant species. Lagerstroemia speciosa could be potentially used as roadside tree. The combination of RGR and APTI value was better to determinate tolerance level of plant to air pollutant than merely APTI method.

Totally James

Science.gov (United States)

Owens, Tom

2006-01-01

This article presents an interview with James Howe, author of "The Misfits" and "Totally Joe". In this interview, Howe discusses tolerance, diversity and the parallels between his own life and his literature. Howe's four books in addition to "The Misfits" and "Totally Joe" and his list of recommended books with lesbian, gay, bisexual, transgender,…

Physiologically-based pharmacokinetic model for Fentanyl in support of the development of Provisional Advisory Levels

International Nuclear Information System (INIS)

Shankaran, Harish; Adeshina, Femi; Teeguarden, Justin G.

2013-01-01

Provisional Advisory Levels (PALs) are tiered exposure limits for toxic chemicals in air and drinking water that are developed to assist in emergency responses. Physiologically-based pharmacokinetic (PBPK) modeling can support this process by enabling extrapolations across doses, and exposure routes, thereby addressing gaps in the available toxicity data. Here, we describe the development of a PBPK model for Fentanyl – a synthetic opioid used clinically for pain management – to support the establishment of PALs. Starting from an existing model for intravenous Fentanyl, we first optimized distribution and clearance parameters using several additional IV datasets. We then calibrated the model using pharmacokinetic data for various formulations, and determined the absorbed fraction, F, and time taken for the absorbed amount to reach 90% of its final value, t90. For aerosolized pulmonary Fentanyl, F = 1 and t90 50 human datasets. • Model predictions are in good agreement with the available pharmacokinetic data. • The model can be used for extrapolating across routes, doses and exposure durations. • We illustrate how the model can be used for developing Provisional Advisory Levels

76 FR 77981 - Build-A-Bear Workshop, Inc., Provisional Acceptance of a Settlement Agreement and Order

Science.gov (United States)

2011-12-15

... CONSUMER PRODUCT SAFETY COMMISSION [CPSC Docket No. 12-C0004] Build-A-Bear Workshop, Inc... 1118.20(e). Published below is a provisionally-accepted Settlement Agreement with Build-A-Bear Workshop..., Build-A-Bear Workshop, Inc. (``Build-A-Bear'') and staff of the United States Consumer Product Safety...

Provisional energy balance of France for 2002; Bilan energetique provisoire de la France pour 2002

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

A provisional energy accounting in France for 2002 is presented. Statistical data and diagrams are provided to detail and discuss the economical and energy context, the primary energy consumption, the national production and the energy dependence, the primary energy consumption for each energy source, the sectorial analysis of the energy consumption and the carbon dioxide emissions. (A.L.B.)

Effects of surface treatment and artificial aging on the shear bond strength of orthodontic brackets bonded to four different provisional restorations.

Science.gov (United States)

Al Jabbari, Youssef S; Al Taweel, Sara M; Al Rifaiy, Mohammed; Alqahtani, Mohammed Q; Koutsoukis, Theodoros; Zinelis, Spiros

2014-07-01

To evaluate the combined effects of material type, surface treatment, and thermocycling on the bond strength of orthodontic brackets to materials used for the fabrication of provisional crowns. Four materials were included in this study (ProTemp, Trim Plus, Trim II, and Superpont C+B). Sixty cylindrical specimens (1 × 3 cm) were prepared from each material and equally divided into three groups. The first group was ground with silica carbide paper, the second was polished with pumice, and the last group was sandblasted with 50-µm aluminum oxide particles. Stainless-steel maxillary central incisor brackets (Victory Series, 3M) were bonded to the provisional material specimens with Transbond XT light-cured composite resin, and half of the specimens from each group were thermocycled 500 times in 5°C and 55°C water baths. Then the brackets were debonded with shear testing, and the results were statistically analyzed by three-way analysis of variance and Tukey's multiple-comparison tests at α  =  0.05. Adhesive Remnant Index (ARI) was also identified. Before and after thermocycling, ProTemp materials showed the highest shear bond strength with orthodontic brackets (10.3 and 13.1 MPa, respectively). The statistical analysis indicated an interaction among the three independent variables (P < .05) and statistically significant differences in bond strength among provisional materials (P < .001), surface treatments (P < .001), and thermocycling (P < .05). According to the ARI, most groups demonstrated adhesive failure. The provisional material type, surface treatment, and artificial aging have a significant effect on bond strength. Sandblasting treatment exerts a beneficial effect on shear bond strength.

Final remediation of the provisional storage near Zavratec

International Nuclear Information System (INIS)

Zeleznik, N.; Mele, I.

2000-01-01

In the Western part of Slovenia near the village of Zavratec radioactive waste from the decontamination of the Oncological Institute has been stored in an old abandoned military barracks for many decades. The ARAO Agency had been assigned to remediate this provisional storage. In 1996 the first phase of the remediation was concluded, in which the measurements, inventorying and repacking of radioactive waste were carried out. At the end of this phase the waste was restored. After three years of suspension, the remedial work continued in autumn 1999 with the separation of radioactive from non-radioactive waste and transportation of all radioactive waste to the Slovenian central storage for small producers near Ljubljana. At the beginning of the year 2000 the old storage near Zavratec was completely decontaminated to be released for unrestricted use. The preparation for and the implementation of remedial actions are presented in the paper. (author)

Suppressor cells in transplantation tolerance: I. analysis of the suppressor status of neonatally and adoptively tolerized rats

International Nuclear Information System (INIS)

Dorsch, S.; Roser, B.

1982-01-01

The lymphocytes from neonatally tolerant rats which adoptively transfer tolerance to sublethally irradiated recipients do so by specificallly suppressing the regeneration of alloreactivity which normally occurs after irradiation. Although tolerant cells will only partially suppress normal alloreactive cells when the two are mixed in near equivalent numbers, experiments in which the interval between injection of tolerant and normal cells into irradiated recipients was gradually extended, indicated that total suppression of normally alloreactive cells was achieved after 8 weeks of prior residence of tolerant cells in the adoptive host. Further evidence that tolerant cells would only suppress if present in excess of normal cells was obtained by reducing the tolerant cell populaton in tolerant donor rats by whole body irradiation. The persistence of tolerance through repeated adoptive transfers was correlated with the persistence of donor (chimeric) cells and the indicator skin graft on adoptive recipients only amplified tolerance expression where the inocula of tolerant cells given was weakly suppressive

Provisional Crown Dislodgement during Scuba Diving: A Case of Barotrauma

Directory of Open Access Journals (Sweden)

Meenal Nitin Gulve

2013-01-01

Full Text Available Changes in ambient pressure, for example, during flying, diving, or hyperbaric oxygen therapy, can lead to barotrauma. Although it may seem that this issue was neglected in dental education and research in recent decades, familiarity with and understanding of these facts may be of importance for dental practitioners. We report the case of a patient who experienced barotrauma involving dislodgement of a provisional crown during scuba diving. Patients who are exposed to pressure changes as a part of their jobs or hobbies and their dentists should know the causes of barotrauma. In addition, the clinician must be aware of the possible influence of pressure changes on the retention of dental components.

The provisional ACR/EULAR definition of remission in RA : a comment on the patient global assessment criterion

NARCIS (Netherlands)

Vermeer, Marloes; Kuper, Hillechiena H.; van der Bijl, Arie E.; Baan, Henriette; Posthumus, Marcel D.; Brus, Herman L. M.; van Riel, Piet L. C. M.; van de Laar, Mart A. F. J.

Objectives. The provisional ACR/European League Against Rheumatism (EULAR) definition of remission in RA requires a score of 41 on the patient global assessment (PGA, 0-10 scale). We explored the relation between the PGA criterion and the patient's clinical disease state in an observational dataset.

Commercialization of radiation tolerant camera

Energy Technology Data Exchange (ETDEWEB)

Lee, Yong Bum; Choi, Young Soo; Kim, Sun Ku; Lee, Jong Min; Cha, Bung Hun; Lee, Nam Ho; Byun, Eiy Gyo; Yoo, Seun Wook; Choi, Bum Ki; Yoon, Sung Up; Kim, Hyun Gun; Sin, Jeong Hun; So, Suk Il

1999-12-01

In this project, radiation tolerant camera which tolerates 10{sup 6} - 10{sup 8} rad total dose is developed. In order to develop radiation tolerant camera, radiation effect of camera components was examined and evaluated, and camera configuration was studied. By the result of evaluation, the components were decided and design was performed. Vidicon tube was selected to use by image sensor and non-browning optics and camera driving circuit were applied. The controller needed for CCTV camera system, lens, light, pan/tilt controller, was designed by the concept of remote control. And two type of radiation tolerant camera were fabricated consider to use in underwater environment or normal environment. (author)

Commercialization of radiation tolerant camera

International Nuclear Information System (INIS)

Lee, Yong Bum; Choi, Young Soo; Kim, Sun Ku; Lee, Jong Min; Cha, Bung Hun; Lee, Nam Ho; Byun, Eiy Gyo; Yoo, Seun Wook; Choi, Bum Ki; Yoon, Sung Up; Kim, Hyun Gun; Sin, Jeong Hun; So, Suk Il

1999-12-01

In this project, radiation tolerant camera which tolerates 10 6 - 10 8 rad total dose is developed. In order to develop radiation tolerant camera, radiation effect of camera components was examined and evaluated, and camera configuration was studied. By the result of evaluation, the components were decided and design was performed. Vidicon tube was selected to use by image sensor and non-browning optics and camera driving circuit were applied. The controller needed for CCTV camera system, lens, light, pan/tilt controller, was designed by the concept of remote control. And two type of radiation tolerant camera were fabricated consider to use in underwater environment or normal environment. (author)

The provisional ACR/EULAR definition of remission in RA: a comment on the patient global assessment criterion

NARCIS (Netherlands)

Vermeer, M.; Kuper, Hillechina H.; van der Bijl, Arie E.; Baan, H.; Posthumus, Marcel D.; Brus, Herman L.M.; van Riel, Piet L.C.M.; van de Laar, Mart A F J

2012-01-01

Objectives. The provisional ACR/European League Against Rheumatism (EULAR) definition of remission in RA requires a score of ≤1 on the patient global assessment (PGA, 0–10 scale). We explored the relation between the PGA criterion and the patient's clinical disease state in an observational dataset.

Immediate provisional restoration of an implant placed in a fresh primary maxillary canine extraction socket: a case report.

Science.gov (United States)

Turkyilmaz, Ilser; Shapiro, Vladimir

2011-01-01

This study describes a clinical case in which a primary maxillary canine with both mobility and root resorption was replaced with an immediately restored dental implant placed into the fresh extraction socket. The implant achieved high primary stability, as determined by resonance frequency analysis, and it was immediately restored with a provisional acrylic resin crown with no centric occlusion. An all-ceramic permanent crown replaced the provisonal crown four months after implant surgery. The implant was stable and no periapical radiolucencies, bleeding on probing, or pathologic probing depth were recorded after one year. The peri-implant soft tissue level appeared stable, and the interdental papillae were preserved, contributing to an optimum final esthetic result. This case supports the use of single implants for the replacement of extracted primary teeth, especially in areas where esthetics is a high priority. The immediate provisional crown maintained soft tissue contours and papillary height.

Dietary exposure to dioxins and dioxin-like PCBs of Hong Kong adults: results of the first Hong Kong Total Diet Study.

Science.gov (United States)

Wong, Waiky W K; Yip, Yiu-chung; Choi, Koon-kay; Ho, Y Y; Xiao, Ying

2013-01-01

Dioxins and dioxin-like polychlorinated biphenyls (PCBs) are persistent organic pollutants (POPs) covered by the Stockholm Convention on POPs. To assess the associated health risk of the Hong Kong population, the dietary exposure of the Hong Kong population and various age-gender subgroups to dioxins and dioxin-like PCBs was estimated in the first Hong Kong Total Diet Study (TDS), where food samples were collected and prepared "as consumed". A total of 142 composite food samples, mainly foods of animal origin and their products and oily food, were analysed for polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and dioxin-like PCBs by the high-resolution gas chromatograph/high-resolution mass spectrometer (HRGC/HRMS) system. Dietary exposures were estimated by combining the analytical results with the food consumption data of Hong Kong adults. The mean and 95th percentile exposures to dioxins and dioxin-like PCBs of the Hong Kong population were 21.9 and 59.7 pg toxic equivalent (TEQ) kg⁻¹ body weight (bw) month⁻¹ respectively, which amounted to 31.3% and 85.2% of the provisional tolerable monthly intake (PTMI). The main dietary source of dioxins and dioxin-like PCBs was "Fish and seafood and their products" (61.9% of the total exposure), followed by "Meat, poultry and game and their products" (20.0%) and "Mixed dishes" (6.95%). The study findings suggest that the Hong Kong population is unlikely to experience the major undesirable health effects of dioxins and dioxin-like PCBs.

Best Practices and Provisional Guidelines for Integrating Mobile, Virtual, and Videogame-Based Training and Assessments

Science.gov (United States)

2014-01-01

videogame -based platforms, 2) role of assessments and how they can be implemented within these platforms, or 3) benefits or challenges of the...Technical Report 1334 Best Practices and Provisional Guidelines for Integrating Mobile, Virtual, and Videogame -Based Training and...Virtual, and Videogame -Based Training and Assessments 5a. CONTRACT OR GRANT NUMBER W5J9CQ-11-D-0002 5b. PROGRAM ELEMENT NUMBER 622785

In vitro comparative evaluation of the effect of two different fiber reinforcements on the fracture toughness of provisional restorative resins

Directory of Open Access Journals (Sweden)

Vaibhav D Kamble

2012-01-01

Clinical Implications: On the basis of this in--vitro study, the use of Glass and Polyethylene fibers tested may be an effective way to reinforce resins used to fabricate fixed provisional restorations.

Immediate loading versus immediate provisionalization of maxillary single-tooth replacements: a prospective randomized study with BioComp implants

NARCIS (Netherlands)

Lindeboom, Jerome A.; Frenken, Joost W.; Dubois, Leander; Frank, Michael; Abbink, Ingmar; Kroon, Frans H.

2006-01-01

PURPOSE: The aim of this prospective randomized study was to evaluate the clinical outcome of immediately loaded solid plasma sprayed (TPS) BioComp (BioComp Industries BV, Vught, The Netherlands) implants versus immediate provisionalized but non-loaded BioComp implants in the anterior and premolar

Immediate Implant Placement of a Single Central Incisor Using a CAD/CAM Crown-Root Form Technique: Provisional to Final Restoration.

Science.gov (United States)

Vafiadis, Dean; Goldstein, Gary; Garber, David; Lambrakos, Anthony; Kowalski, Bj

2017-02-01

Preserving soft and hard tissues after extraction and implant placement is crucial for anterior esthetics. This technique will show how the information gathered from a cone-beam computed tomography (CBCT) scan of the maxillary left central incisor and an intra-oral digital impression can be merged to fabricate a CAD/CAM crown-root matrix to be used as an immediate provisional restoration that mimics the natural anatomy. Due to trauma, a left central incisor appeared to be fractured and was scheduled for extraction and implant placement. The crown-root configuration captured by the CBCT scan was merged with the digital files from an intra-oral digital impression. A CAD/CAM crown-root matrix was fabricated. Because the matrix shell was fabricated with the exact anatomy of the natural tooth, it replicated the position and three dimensional anatomy of the soft and hard tissue. It was connected to the implant with a customized provisional abutment. A digital impression of a coded healing abutment was made to fabricate the final implant abutment and final restoration. Throughout the treatment time and 36 months after completion, the thickness of tissue, emergence profile, and adjacent papilla was analyzed by clinical evaluation and photography and seemed to be maintained. The use of a pre-operative intra-oral digital scan of the clinical crown-root architecture and the CBCT scan of the bone/root anatomy, can be used together to fabricate a CAD/CAM crown-root form provisional matrix. This digital design helps in the preservation of the 3D tissue topography, as well as the final restoration. The preservation of soft and hard tissue after extraction and implant placement has always been paramount for ideal anterior implant esthetics. Using the information from digital files from CBCT scans and intra-oral scans may help the clinician identify critical anatomical features that can be replicated in the provisional and final CAD/CAM restoration. (J Esthet Restor Dent 29

Requirements on the provisional safety analyses and technical comparison of safety measures

International Nuclear Information System (INIS)

2010-04-01

The concept of a Geological Underground Repository (SGT) was adopted by the Swiss Federal Council on April 2 nd , 2008. It fixes the goals and the safety technical criteria as well as the procedures for the choice of the site for an underground repository. Those responsible for waste management evaluate possible site regions according to the present status of geological knowledge and based on the safety criteria defined in SGT as well as on technical feasibility. In a first step, they propose geological repository sites for high level (HAA) and for low and intermediate level (SMA) radioactive wastes and justify their choice in a report delivered to the Swiss Federal Office of Energy. The Swiss Federal Council reviews the choices presented and, in the case of positive evaluation, approves them and considers them as an initial orientation. In a second step, based on the possible sites according to step 1, the waste management institution responsible has to reduce the repositories chosen for HAA and SMA by taking into account safety aspects, technical feasibility as well as space planning and socio-economical aspects. In making this choice, safety aspects have the highest priority. The criteria used for the evaluation in the first step have to be defined using provisional quantitative safety analyses. On the basis of the whole appraisal, including space planning and socio-economical aspects, those responsible for waste management propose at least two repository sites for HAA- and SMA-waste. Their selection is then reviewed by the authorities and, in the case of a positive assesment, the selection is taken as an intermediate result. The remaining sites are further studied to examine site choice and the delivery of a request for a design license. If necessary, the requested geological knowledge has to be confirmed by new investigations. Based on the results of the choosing process and a positive evaluation by the safety authorities, the Swiss Federal Council has to

Comparison of a priori versus provisional heparin therapy on radial artery occlusion after transradial coronary angiography and patent hemostasis (from the PHARAOH Study).

Science.gov (United States)

Pancholy, Samir B; Bertrand, Olivier F; Patel, Tejas

2012-07-15

Systemic anticoagulation decreases the risk of radial artery occlusion (RAO) after transradial catheterization and standard occlusive hemostasis. We compared the efficacy and safety of provisional heparin use only when the technique of patent hemostasis was not achievable to standard a priori heparin administration after radial sheath introduction. Patients referred for coronary angiography were randomized in 2 groups. In the a priori group, 200 patients received intravenous heparin (50 IU/kg) immediately after sheath insertion. In the provisional group, 200 patients did not receive heparin during the procedure. After sheath removal, hemostasis was obtained using a TR band (Terumo corporation, Tokyo, Japan) with a plethysmography-guided patent hemostasis technique. In the provisional group, no heparin was given if radial artery patency could be obtained and maintained. If radial patency was not achieved, a bolus of heparin (50 IU/kg) was given. Radial artery patency was evaluated at 24 hours (early RAO) and 30 days after the procedure (late RAO) by plethysmography. Patent hemostasis was obtained in 67% in the a priori group and 74% in the provisional group (p = 0.10). Incidence of RAO remained similar in the 2 groups at the early (7.5% vs 7.0%, p = 0.84) and late (4.5% vs 5.0%, p = 0.83) evaluations. Women, patients with diabetes, patients having not received heparin, and patients without radial artery patency during hemostasis had more RAO. By multivariate analysis, patent radial artery during hemostasis (odds ratio [OR] 0.03, 95% confidence interval [CI] 0.004 to 0.28, p = 0.002) and diabetes (OR 11, 95% CI 3 to 38,p patent hemostasis is maintained. Copyright © 2012 Elsevier Inc. All rights reserved.

Overview of Provisional Peer-Reviewed Toxicity Values (PPRTVs), Alternative Methods in Human Health Risk Assessment, and the RapidTox Dashboard

Science.gov (United States)

This poster provides an overview of three key lines of ongoing work at EPA/ORD/NCEA-CIN: Provisional Peer-Reviewed Toxicity Values (PPRTVs), Alternative Methods in Human Health Risk Assessment, and the RapidTox Dashboard collaboration.

Effectiveness of halo-tolerant, auxin producing Pseudomonas and Rhizobium strains to improve osmotic stress tolerance in mung bean (Vigna radiata L.

Directory of Open Access Journals (Sweden)

Maqshoof Ahmad

2013-12-01

Full Text Available Halo-tolerant, auxin producing bacteria could be used to induce salt tolerance in plants. A number of Rhizobium and auxin producing rhizobacterial strains were assessed for their ability to tolerate salt stress by conducting osmoadaptation assay. The selected strains were further screened for their ability to induce osmotic stress tolerance in mung bean seedlings under salt-stressed axenic conditions in growth pouch/jar trials. Three most effective strains of Rhizobium and Pseudomonas containing ACC-deaminase were evaluated in combination, for their ability to induce osmotic stress tolerance in mung bean at original, 4, and 6 dS m-1 under axenic conditions. Results showed that sole inoculation of Rhizobium and Pseudomonas strains improved the total dry matter up to 1.4, and 1.9 fold, respectively, while the increase in salt tolerance index was improved up to 1.3 and 2.0 fold by the Rhizobium and Pseudomonas strains, respectively. However, up to 2.2 fold increase in total dry matter and salt tolerance index was observed due to combined inoculation of Rhizobium and Pseudomonas strains. So, combined application of Rhizobium and Pseudomonas strains could be explored as an effective strategy to induce osmotic stress tolerance in mung bean.

Optimizing anterior esthetics of a single-tooth implant through socket augmentation and immediate provisionalization: A case report with 7-year follow-up

Directory of Open Access Journals (Sweden)

Po-Sung Fu

2012-10-01

Full Text Available Tooth extraction inevitably accompanies alveolar ridge resorption with loss of pre-existing tissue morphology. Replacing missing teeth with dental implants has become popular, but restoring anterior teeth with implant-supported restorations is a technique-sensitive task and poses challenges for dentists. With the progress of implant dentistry, the demand for optimal esthetics has become linked with the desire for faster, easier techniques that shorten treatment time and also satisfy patients. Immediate provisionalization of a single-tooth implant provides significant benefits compared with traditional delayed protocols, such as aiding the contouring of peri-implant soft tissue and enhancing patient comfort and satisfaction. This article describes a meticulous approach to a hopeless maxillary central incisor with root fracture. The defect in the extraction socket was reconstructed using autogenous bone harvested from the chin. Four months later, an implant was installed and immediately restored. After another healing period of 6 months, the peri-implant soft tissue had been shaped and matured according to the contours of the provisional restoration. The emergence profile was used to duplicate the definitive restoration. Peri-implant esthetics was achieved through socket augmentation and immediate provisionalization of the implant. This treatment modality attained predictable and maintainable outcomes, both functionally and esthetically.

Prediction of solubility and permeability class membership: provisional BCS classification of the world's top oral drugs.

Science.gov (United States)

Dahan, Arik; Miller, Jonathan M; Amidon, Gordon L

2009-12-01

The Biopharmaceutics Classification System (BCS) categorizes drugs into one of four biopharmaceutical classes according to their water solubility and membrane permeability characteristics and broadly allows the prediction of the rate-limiting step in the intestinal absorption process following oral administration. Since its introduction in 1995, the BCS has generated remarkable impact on the global pharmaceutical sciences arena, in drug discovery, development, and regulation, and extensive validation/discussion/extension of the BCS is continuously published in the literature. The BCS has been effectively implanted by drug regulatory agencies around the world in setting bioavailability/bioequivalence standards for immediate-release (IR) oral drug product approval. In this review, we describe the BCS scientific framework and impact on regulatory practice of oral drug products and review the provisional BCS classification of the top drugs on the global market. The Biopharmaceutical Drug Disposition Classification System and its association with the BCS are discussed as well. One notable finding of the provisional BCS classification is that the clinical performance of the majority of approved IR oral drug products essential for human health can be assured with an in vitro dissolution test, rather than empirical in vivo human studies.

Provisional standards of radiation safety of flight personnel and passengers in air transport of the civil aviation

Science.gov (United States)

1977-01-01

Provisional standards for radiation affecting passenger aircraft are considered. Agencies responsible for seeing that the regulations are enforced are designated while radiation sources and types of radiation are defined. Standard levels of permissible radiation are given and conditions for radiation safety are discussed. Dosimetric equipment on board aircraft is delineated and regulation effective dates are given.

Provisional standards of radiation safety of flight personnel and passengers in air transport of the civil aviation

International Nuclear Information System (INIS)

Provisional standards for radiation affecting passenger aircraft are considered. Agencies responsible for seeing that the regulations are enforced are designated while radiation sources and types of radiation are defined. Standard levels of permissible radiation are given and conditions for radiation safety are discussed. Dosimetric equipment on board aircraft is delineated and regulation effective dates are given

Dietary exposure to aflatoxin B1, ochratoxin A and fuminisins of adults in Lao Cai province, Viet Nam: A total dietary study approach.

Science.gov (United States)

Huong, Bui Thi Mai; Tuyen, Le Danh; Tuan, Do Huu; Brimer, Leon; Dalsgaard, Anders

2016-12-01

Aflatoxins, fumonisins and ochratoxin A that contaminate various agricultural commodities are considered of significant toxicity and potent human carcinogens. This study took a total dietary study approach and estimated the dietary exposure of these mycotoxins for adults living in Lao Cai province, Vietnam. A total of 42 composite food samples representing 1134 individual food samples were prepared according to normal household practices and analysed for the three mycotoxins. Results showed that the dietary exposure to aflatoxin B1 (39.4 ng/kg bw/day) and ochratoxin A (18.7 ng/kg bw/day) were much higher than recommended provisional tolerable daily intake (PTDI) values mainly due to contaminated cereals and meat. The exposure to total fumonisins (1400 ng/kg bw/day) was typically lower than the PTDI value (2000 ng/kg bw/day). The estimated risk of liver cancer associated with exposure to aflatoxin B1 was 2.7 cases/100,000 person/year. Margin of exposure (MOE) of renal cancer linked to ochratoxin A and liver cancer associated with fumonisins were 1124 and 1954, respectively indicating risk levels of public health concern. Further studies are needed to evaluate the efficiency of technical solutions which could reduce mycotoxin contamination as well as to determine the health effects of the co-exposure to different types of mycotoxins. Copyright © 2016 Elsevier Ltd. All rights reserved.

Agitation in cognitive disorders: International Psychogeriatric Association provisional consensus clinical and research definition.

Science.gov (United States)

Cummings, Jeffrey; Mintzer, Jacobo; Brodaty, Henry; Sano, Mary; Banerjee, Sube; Devanand, D P; Gauthier, Serge; Howard, Robert; Lanctôt, Krista; Lyketsos, Constantine G; Peskind, Elaine; Porsteinsson, Anton P; Reich, Edgardo; Sampaio, Cristina; Steffens, David; Wortmann, Marc; Zhong, Kate

2015-01-01

Agitation is common across neuropsychiatric disorders and contributes to disability, institutionalization, and diminished quality of life for patients and their caregivers. There is no consensus definition of agitation and no widespread agreement on what elements should be included in the syndrome. The International Psychogeriatric Association formed an Agitation Definition Work Group (ADWG) to develop a provisional consensus definition of agitation in patients with cognitive disorders that can be applied in epidemiologic, non-interventional clinical, pharmacologic, non-pharmacologic interventional, and neurobiological studies. A consensus definition will facilitate communication and cross-study comparison and may have regulatory applications in drug development programs. The ADWG developed a transparent process using a combination of electronic, face-to-face, and survey-based strategies to develop a consensus based on agreement of a majority of participants. Nine-hundred twenty-eight respondents participated in the different phases of the process. Agitation was defined broadly as: (1) occurring in patients with a cognitive impairment or dementia syndrome; (2) exhibiting behavior consistent with emotional distress; (3) manifesting excessive motor activity, verbal aggression, or physical aggression; and (4) evidencing behaviors that cause excess disability and are not solely attributable to another disorder (psychiatric, medical, or substance-related). A majority of the respondents rated all surveyed elements of the definition as "strongly agree" or "somewhat agree" (68-88% across elements). A majority of the respondents agreed that the definition is appropriate for clinical and research applications. A provisional consensus definition of agitation has been developed. This definition can be used to advance interventional and non-interventional research of agitation in patients with cognitive impairment.

Application of the 2-piece orthodontic C-implant for provisional restoration with laser welded customized coping: a case report.

Science.gov (United States)

Paek, Janghyun; Ahn, Hyo-Won; Jeong, Do-Min; Shim, Jeong-Seok; Kim, Seong-Hun; Chung, Kyu-Rhim

2015-03-25

This article presents the application of laser welding technique to fabricate an orthodontic mini-implant provisional restoration in missing area after limited orthodontic treatment. A 15-year-old boy case is presented. Two-piece orthodontic C-implant was placed after regaining space for missing right mandibular central incisor. Due to angular deviation of implant, customized abutment was required. Ready-made head part was milled and lingual part of customized abutment was made with non-precious metal. Two parts then were laser welded (Master 1000, Elettrolaser Italy, Verona, Italy) and indirect lab composite (3 M ESPE Sinfony, St. Paul, MN, USA) was built up. The patient had successful result, confirmed by clinical and radiographic examinations. Before the patient is ready to get a permanent restoration later on, this provisional restoration will be used. This case shows that a two-piece orthodontic C-implant system can be used to maintain small edentulous space after orthodontic treatment.

Gap analysis between provisional diagnosis and final diagnosis in government and private teaching hospitals: A record-linked comparative study.

Science.gov (United States)

Chatterjee, Sudeshna; Ray, Krishnangshu; Das, Anup Kumar

2016-01-01

1. To identify the extent of clinical gaps at the context of knowledge, practice and systems. 2. To formulate necessary intervention measures towards bridging the gaps. Comparative, cross-sectional and non-interventional study. It is retrospective, record-based study conducted upon inpatients ( n = 200) of major disciplines of two teaching hospitals. Major outcome variables were to observe the matching and un-matching of final and provisional diagnosis by using ICD-10 criteria. Comparative analysis of specific and selective gaps were estimated in terms of percentage (%). Pilot observation showed the existence of gaps between provisional and final diagnosis in both private and government institution. Both knowledge and skill gaps were evident in caregivers and gap in documentation was existent in medical records. The pilot data is may be an eye-opener to public and private governance systems for understanding and revising the process service planning and service delivery. Necessary intervention measures may be contemplated towards enhancing diagnostic skill of doctors for quality hospital care.

Stress-tolerant mutants induced by heavy-ion beams

International Nuclear Information System (INIS)

Abe, Tomoko; Yoshida, Shigeo; Bae, Chang-Hyu; Ozaki, Takuo

2000-01-01

Comparative study was made on mutagenesis in tobacco embryo induced by exposure to EMS (ethyl methane-sulfonate) ion beams during the fertilization cycle. Tobacco embryo cells immediately after pollination were exposed to heavy ion beam and the sensitivity to the irradiation was assessed in each developmental stage and compared with the effects of EMS, a chemical mutagen. Morphologically abnormality such as chlorophyll deficiency was used as a marker. A total of 17 salt-tolerant plants were selected from 3447 M 1 seeds. A cell line showed salt resistance. The cell growth and chlorophyll content were each two times higher than that of WT cells in the medium containing 154 mM NaCl. Seven strains of M 3 progeny of 17 salt-tolerant plants, showed strong resistance, but no salt tolerant progeny were obtained from Xanthi or Ne-ion irradiation. This shows that the sensitivity of plant embryo to this irradiation technique may vary among species. When exposed to 14 N ion beam for 24-108 hours after pollination, various morphological mutants appeared at 18% in M 1 progeny and herbicide tolerant and salt tolerant mutants were obtained. A strong Co-tolerant strain was obtained in two of 17 salt-tolerant strains and a total of 46 tolerant strains (0.2%) were obtained from 22,272 grains of M 1 seeds. In these tolerant strains, the absorption of Co was slightly decreased, but those of Mg and Mn were increased. Mutants induced with ion-beam irradiation have potential not only for practical use in the breeding of stress-tolerant plants but also for gene analysis that will surely facilitate the molecular understanding of the tolerance mechanisms. (M.N.)

Use of Resin-Based Provisional Material to Create the Posterior Palatal Seal in Complete Denture Definitive Impressions.

Science.gov (United States)

de Souza Batista, Victor Eduardo; Vechiato-Filho, Aljomar José; Pellizzer, Eduardo Piza; Verri, Fellippo Ramos

2017-11-17

The purpose of this article was to present an alternative procedure using resin-based provisional material to create the posterior palatal seal (PPS). This method offers more practicality in clinical routine and increased control for addition of material to create the PPS when compared to traditional techniques such as the use of impression wax. © 2017 by the American College of Prosthodontists.

The Provisional Irish Republican Army and the Development of Mortars

Directory of Open Access Journals (Sweden)

Gary Ackerman

2016-03-01

Full Text Available The Provisional Irish Republican Army (PIRA repeatedly showed itself to be one of the most inventive and adaptive of all the violent non-state actors who operated in the latter part of the twentieth century. Among its most innovative exploits was the PIRA’s successful development and fielding – spanning almost its entire operational lifetime – of improvised mortar systems. This chapter will trace the sustained development of mortars, including the underlying motivations for pursuing mortars as a complex engineering effort, the process by which the development took place and the underpinnings of its success. The discussion will show that the PIRA’s mortar development program was born out of tactical necessity but enabled by good organizational practices and the organization’s access to materials, expertise and places in which to leverage these.

Acute tolerance of hyperfractionated accelerated total body irradiation

International Nuclear Information System (INIS)

Latz, D.; Schraube, P.; Wannenmacher, M.

1996-01-01

Background: Acute side effects of total body irradiation lead to intense molestations of the patients. Therefore, it is desirable to take measures to reduce these side effects. In a retrospective study the frequency on acute side effects of a hyperfractionated accelerated total body irradiation was assessed and compared to frequencies of other exposure schedules published in the literature. Additionally the influence of ondansetron on the frequency of nausea and vormiting was investigated. Patients and Method: From 1989 to 1992, 76 patients (47 male, 29 female; median age 38 years) underwent total body irradiation before autologeous bone marrow transplantation. They received 3 daily doses of 1.20 Gy each every 4 h on 4 successive days to a total dose of 14,40 Gy. Thirty-nine patients received 3x8 mg (daily, intravenous or per os) ondansetron during the whole course of irradiation. Results: The most relevant side effects were nausea and vomiting. Patients, who did not receive ondansetron (n=37) showed a nausea and emesis rate of 73%. With ondansetron (n=39) nausea and emesis were reduced to 38%. Also the grade of severity of these side effects was reduced. Conclusions: Ondansetron proved to be an effective medicament for relieving nausea and vormiting during total body irradiation. The results obtained are in concordance with those published in the literature. (orig.) [de

Immediate provisionalization of dental implants placed in healed alveolar ridges and extraction sockets: a 5-year prospective evaluation.

Science.gov (United States)

Cooper, Lyndon F; Reside, Glenn J; Raes, Filiep; Garriga, Joan Soliva; Tarrida, Luis Giner; Wiltfang, Jörg; Kern, Matthias; De Bruyn, Hugo

2014-01-01

This 5-year prospective multicenter study compared implant survival and success, peri-implant health and soft tissue responses, crestal bone level stability, and complication rates following immediate loading of single OsseoSpeed implants placed in anterior maxillary healed ridges or extraction sockets. Individuals requiring anterior tooth replacement with single implants were treated and immediately provisionalized. Definitive all-ceramic crowns were placed at 12 weeks. Implant survival, bone levels, soft tissue levels, and peri-implant health were monitored for 5 years. One hundred thirteen patients received implants in fresh sockets (55) and healed ridges (58). After 5 years, 45 and 49 patients remained for evaluation, respectively. During the first year, three implants failed in the extraction socket group (94.6% survival) and one implant failed in the healed ridge group (98.3% survival); this difference was not significant. No further implant failures were recorded. After 5 years, the interproximal crestal bone levels were located a mean of 0.43 ± 0.63 mm and 0.38 ± 0.62 mm from the reference points of implants in sockets and healed ridges (not a significant difference). In both groups, papillae increased over time and peri-implant mucosal zenith positions were stable from the time of definitive crown placement in sockets and healed ridges. Compared to flap surgery for implants in healed ridges, flapless surgery resulted in increased peri-implant mucosal tissue dimension (average, 0.78 ± 1.34 mm vs 0.19 ± 0.79 mm). After 5 years, the bone and soft tissue parameters that characterize implant success and contribute to dental implant esthetics were similar following the immediate provisionalization of implants in sockets and healed ridges. The overall tissue responses and reported implant survival support the immediate provisionalization of dental implants in situations involving healed ridges and, under ideal circumstances, extraction sockets.

Suppressor cells in transplantation tolerance. I. Analysis of the suppressor status of neonatally and adoptively tolerized rats

International Nuclear Information System (INIS)

Dorsch, S.; Roser, B.

1982-01-01

The lymphocytes from neonatally tolerant rats which adoptively transfer tolerance to sublethally irradiated recipients do so by specifically suppressing the regeneration of alloreactivity which normally occurs after irradiation. Although tolerant cells will only partially suppress normal alloreactive cells when the two are mixed in near equivalent numbers, experiments in which the interval between injection of tolerant and normal cells into irradiated recipients was gradually extended, indicated that total suppression of normally alloreactive cells was achieved after 8 weeks of prior residence of tolerant cells in the adoptive host. Further evidence that tolerant cells would only suppress if present in excess of normal cells was obtained by reducing the tolerant cell population in tolerant donor rats by whole body irradiation. These animals then lost their ability to suppress normal alloreactive cells administered to them. The immune status of adoptively tolerized animals did not mimic that of the donors of the tolerant cells. Even where full tolerance, as measured by skin graft survival, failure to synthesize alloantibodies, and capacity to further transfer skin graft tolerance to secondary recipients, was evident the lymphocytes of these animals showed considerable graft-versus-host (GVH) reactivity. The persistence of tolerance through repeated adoptive transfers was correlated with the persistence of donor (chimeric) cells and the indicator skin graft on adoptive recipients only amplified tolerance expression where the inocula of tolerant cells given was weakly suppressive. Finally, removal of the minor population of chimeric cells from tolerant inocula using cytotoxic alloantisera abolished the capacity to transfer tolerance. These results imply an active role for chimeric cells which is best understood as an immune response involving proliferation driven by the idiotypes of the alloreceptors on host cells

Multifactorial analysis of variables influencing the fracture strength of repair joints for provisional restorative materials using the statistically based Taguchi method

Directory of Open Access Journals (Sweden)

Chun-Jen Cheng

2010-06-01

Conclusion: Within the limitations of this study, these four design factors had different contributions to the fracture strength of repaired provisional restorations. Clinicians must be aware of the sequence of importance in determining better problem-solving methods.

Fault tolerant linear actuator

Science.gov (United States)

Tesar, Delbert

2004-09-14

In varying embodiments, the fault tolerant linear actuator of the present invention is a new and improved linear actuator with fault tolerance and positional control that may incorporate velocity summing, force summing, or a combination of the two. In one embodiment, the invention offers a velocity summing arrangement with a differential gear between two prime movers driving a cage, which then drives a linear spindle screw transmission. Other embodiments feature two prime movers driving separate linear spindle screw transmissions, one internal and one external, in a totally concentric and compact integrated module.

Stress-tolerant mutants induced by heavy-ion beams

Energy Technology Data Exchange (ETDEWEB)

Abe, Tomoko; Yoshida, Shigeo [Institute of Physical and Chemical Research, Wako, Saitama (Japan); Bae, Chang-Hyu [Sunchon National University, Sunchon (Korea); Ozaki, Takuo [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Wang, Jing Ming [Akita Prefectural Univ. (Japan)

2000-07-01

Comparative study was made on mutagenesis in tobacco embryo induced by exposure to EMS (ethyl methane-sulfonate) ion beams during the fertilization cycle. Tobacco embryo cells immediately after pollination were exposed to heavy ion beam and the sensitivity to the irradiation was assessed in each developmental stage and compared with the effects of EMS, a chemical mutagen. Morphologically abnormality such as chlorophyll deficiency was used as a marker. A total of 17 salt-tolerant plants were selected from 3447 M{sub 1} seeds. A cell line showed salt resistance. The cell growth and chlorophyll content were each two times higher than that of WT cells in the medium containing 154 mM NaCl. Seven strains of M{sub 3} progeny of 17 salt-tolerant plants, showed strong resistance, but no salt tolerant progeny were obtained from Xanthi or Ne-ion irradiation. This shows that the sensitivity of plant embryo to this irradiation technique may vary among species. When exposed to {sup 14}N ion beam for 24-108 hours after pollination, various morphological mutants appeared at 18% in M{sub 1} progeny and herbicide tolerant and salt tolerant mutants were obtained. A strong Co-tolerant strain was obtained in two of 17 salt-tolerant strains and a total of 46 tolerant strains (0.2%) were obtained from 22,272 grains of M{sub 1} seeds. In these tolerant strains, the absorption of Co was slightly decreased, but those of Mg and Mn were increased. Mutants induced with ion-beam irradiation have potential not only for practical use in the breeding of stress-tolerant plants but also for gene analysis that will surely facilitate the molecular understanding of the tolerance mechanisms. (M.N.)

State of art in radiation tolerant camera

Energy Technology Data Exchange (ETDEWEB)

Choi; Young Soo; Kim, Seong Ho; Cho, Jae Wan; Kim, Chang Hoi; Seo, Young Chil

2002-02-01

Working in radiation environment such as nuclear power plant, RI facility, nuclear fuel fabrication facility, medical center has to be considered radiation exposure, and we can implement these job by remote observation and operation. However the camera used for general industry is weakened at radiation, so radiation-tolerant camera is needed for radiation environment. The application of radiation-tolerant camera system is nuclear industry, radio-active medical, aerospace, and so on. Specially nuclear industry, the demand is continuous in the inspection of nuclear boiler, exchange of pellet, inspection of nuclear waste. In the nuclear developed countries have been an effort to develop radiation-tolerant cameras. Now they have many kinds of radiation-tolerant cameras which can tolerate to 10{sup 6}-10{sup 8} rad total dose. In this report, we examine into the state-of-art about radiation-tolerant cameras, and analyze these technology. We want to grow up the concern of developing radiation-tolerant camera by this paper, and upgrade the level of domestic technology.

Total lymphoid irradiation

International Nuclear Information System (INIS)

Sutherland, D.E.; Ferguson, R.M.; Simmons, R.L.; Kim, T.H.; Slavin, S.; Najarian, J.S.

1983-01-01

Total lymphoid irradiation by itself can produce sufficient immunosuppression to prolong the survival of a variety of organ allografts in experimental animals. The degree of prolongation is dose-dependent and is limited by the toxicity that occurs with higher doses. Total lymphoid irradiation is more effective before transplantation than after, but when used after transplantation can be combined with pharmacologic immunosuppression to achieve a positive effect. In some animal models, total lymphoid irradiation induces an environment in which fully allogeneic bone marrow will engraft and induce permanent chimerism in the recipients who are then tolerant to organ allografts from the donor strain. If total lymphoid irradiation is ever to have clinical applicability on a large scale, it would seem that it would have to be under circumstances in which tolerance can be induced. However, in some animal models graft-versus-host disease occurs following bone marrow transplantation, and methods to obviate its occurrence probably will be needed if this approach is to be applied clinically. In recent years, patient and graft survival rates in renal allograft recipients treated with conventional immunosuppression have improved considerably, and thus the impetus to utilize total lymphoid irradiation for its immunosuppressive effect alone is less compelling. The future of total lymphoid irradiation probably lies in devising protocols in which maintenance immunosuppression can be eliminated, or nearly eliminated, altogether. Such protocols are effective in rodents. Whether they can be applied to clinical transplantation remains to be seen

Comparative Evaluation of Marginal Discrepancy in Tooth Colored Self Cure Acrylic Provisional Restorations With and Without Reinforcement of Glass Beads: An In-Vitro Study.

Science.gov (United States)

Yasangi, Manoj Kumar; Mannem, Dhanalakshmi; Bommireddy, Vikram Simha; Neturi, Sirisha; Ravoori, Srinivas; Jyothi

2015-05-01

This invitro study was conducted to compare and evaluate marginal discrepancy in two types of tooth colored self cure provisional restorative materials {DPI&UNIFAST TRAD} before and after reinforcement of glass beads. The aim of the present study was to evaluate and compare marginal discrepancy in two types of provisional restorative materials (DPI and UNI FAST TRAD) before and after reinforcement with Glass beads. Tooth shaped resin copings were fabricated on custom made brass metal die. A total of 60 resin copings were fabricated in which 30 samples were prepared with DPI and 30 samples with UNIFAST material. Each group of 30 samples were divided in to two sub groups in which 15 samples were prepared with glass bead reinforcement and 15 samples without reinforcement. The marginal discrepancy was evaluated with photomicroscope {Reichet Polyvar 2 met} by placing the resin copings on custom made brass resin coping holder. Measurements obtained were statistically analysed by unpaired t-test to know any significance between two variables. Unreinforced DPI specimens had shown lower marginal discrepancy (442.82) than reinforced specimens (585.77). Unreinforced UNIFAST specimens have shown high values of marginal discrepancy (592.83) than reinforced specimens (436.35). p-value between reinforced and unreinforced specimens of DPI (p=0.0013) and UNIFAST (p= 0.0038) has shown statistical significance. This in-vitro study revealed that unreinforced DPI specimens have shown lower marginal discrepancy than reinforced specimens and unreinforced UNIFAST specimens have shown higher values of marginal discrepancy than reinforced specimens.

Comparative Evaluation of Marginal Discrepancy in Tooth Colored Self Cure Acrylic Provisional Restorations With and Without Reinforcement of Glass Beads: An In-Vitro Study

Science.gov (United States)

Yasangi, Manoj Kumar; Mannem, Dhanalakshmi; Neturi, Sirisha; Ravoori, Srinivas; Jyothi

2015-01-01

Context This invitro study was conducted to compare and evaluate marginal discrepancy in two types of tooth colored self cure provisional restorative materials {DPI&UNIFAST TRAD} before and after reinforcement of glass beads. Aim The aim of the present study was to evaluate and compare marginal discrepancy in two types of provisional restorative materials (DPI and UNI FAST TRAD) before and after reinforcement with Glass beads. Materials and Methods Tooth shaped resin copings were fabricated on custom made brass metal die. A total of 60 resin copings were fabricated in which 30 samples were prepared with DPI and 30 samples with UNIFAST material. Each group of 30 samples were divided in to two sub groups in which 15 samples were prepared with glass bead reinforcement and 15 samples without reinforcement. The marginal discrepancy was evaluated with photomicroscope {Reichet Polyvar 2 met} by placing the resin copings on custom made brass resin coping holder. Results Measurements obtained were statistically analysed by unpaired t-test to know any significance between two variables. Unreinforced DPI specimens had shown lower marginal discrepancy (442.82) than reinforced specimens (585.77). Unreinforced UNIFAST specimens have shown high values of marginal discrepancy (592.83) than reinforced specimens (436.35). p-value between reinforced and unreinforced specimens of DPI (p=0.0013) and UNIFAST (p= 0.0038) has shown statistical significance. Conclusion This in-vitro study revealed that unreinforced DPI specimens have shown lower marginal discrepancy than reinforced specimens and unreinforced UNIFAST specimens have shown higher values of marginal discrepancy than reinforced specimens. PMID:26155574

Dietary exposure to aluminium of urban residents from cities in South China.

Science.gov (United States)

Jiang, Qi; Wang, Jing; Li, Min; Liang, Xuxia; Dai, Guangwei; Hu, Zhikun; Wen, Jian; Huang, Qiong; Zhang, Yonghui

2013-01-01

A dietary survey was conducted over three consecutive days by using 24-hour dietary recall in the Pearl River Delta of South China to investigate the dietary consumption status. A total of 1702 food samples, 22 food groups, were collected, and aluminium concentrations of foods were determined by using ICP-MS. Weekly dietary exposure to aluminium of the average urban residents of South China was estimated to be 1.5 mg kg⁻¹ body weight, which amounted to 76% of the provisional tolerable weekly intake. Wheat-made products (53.5%) contributed most to the dietary exposure, followed by vegetables (12.2%). The high-level consumers' weekly exposure to aluminium was 11.1 mg kg⁻¹ body weight, which amounted to 407% of the provisional tolerable weekly intake. The results indicated that the general urban residents in South China might be safe from aluminium exposure, but the high-level consumers might be at some risk of aluminium exposure. The foods contributing to aluminium exposure were processed food with aluminium-containing food additives. It is necessary to take effective measures to control the overuse of aluminium-containing food additives.

Psychological aspects of political tolerance among adolescents.

Science.gov (United States)

Sotelo, M J; Sangrador, J L

1997-12-01

This study concerns 273 Spanish adolescents, aged between 14 and 17, 125 boys and 148 girls. The measured variables were political tolerance, liking for several groups, political experience, cognitive moral reasoning, support for democratic norms, support for violent groups, identification with a group of friends, identification with a religious group, and identification with a soccer team. The objectives of this work were (a) to establish groups of adolescents based on the relationship between their willingness to extend rights to several groups and their liking of these groups, (b) to know the personality characteristics of tolerant and intolerant adolescents, and (c) to set up correlations between age and total tolerance, total liking, and the variables correlated with tolerance. The main findings are that older and younger adolescents belong to different groups, with respect to tolerance, and something similar can be said about boys and girls. Intolerant adolescents perceive themselves as anxious, insecure, solitary, and obstinate. Significant positive correlations between age and political experience, rated support for democratic norms and ratings for identification with a group of friends were found. On the contrary, there were significant negative correlations between age and rated support for violent groups, identification with a religious group, and identification with a soccer team.

Immediate provisionalization of immediate implants in the esthetic zone: a prospective case series evaluating implant survival, esthetics, and bone maintenance.

Science.gov (United States)

Levin, Barry P; Wilk, Brian L

2013-05-01

This prospective study evaluates immediately placed and immediately provisionalized implants in the esthetic zone. All implants were TiO2-blasted, fluoride-modified, grade 4 titanium, with a coronal microthread design. Bone grafting and guided bone regeneration (GBR) was performed at all sites, and screw-retained temporary restorations were delivered on the day of surgery. All of the provisional crown(s) were out of occlusal function and remained in place for at least 8 weeks prior to initiation of definitive restorative therapy. Bone maintenance (BM) was considered successful if radiographs demonstrated proximal bone levels even or coronal to the implant platform. Of the 29 implants placed, 25 (86 percent) achieved bone maintenance at least 12 months post-loading with the final restorations. This study was considered successful, with 100 percent implant survival after at least 1 year loading of the final restoration, and 100 percent of patients were satisfied with the esthetics of their implant treatment.

Use of modified Harvard step test for the evaluation of exercise tolerance in patients with a functional single ventricle after total cavopulmonary connection

Directory of Open Access Journals (Sweden)

A. A. Tupikina

2016-01-01

Full Text Available According to the literature, nearly one-third of patients with congenital heart diseases have signs of heart failure. Objective: to assess the possibility and results of using a modified Harvard step test (MHST for the evaluation of exercise tolerance in children with a functional single ventricle. The investigation covered 110 healthy children aged 6 to 16 years and 29 patients aged 3 to 16 years with a functional single ventricle after total cavopulmonary connection with an extracardiac conduit a year after surgery and fenestration closure. MHST using a complete protocol was carried out in 44,8% of the patients. In the other examinees, the reason for stopping the test was premature muscle weakness and dyspnea. This could establish Functional Class (FC II heart failure in 55,2% of the sick children. In the examinees, the MHST index (MHSTI characterizing exercise tolerance ranged from 22,4 to 111. The median MHSTI scores significantly differed between the groups of patients with FC I and II heart failure (p=0,021. Exercise tolerance was lower in 17,2% of the patients with a functional single ventricle; in the others it was average and above average (41,5 and 41,3%, respectively, which was suggestive of good hemodynamic adaptation in patients after surgery. The findings prove the safety and efficiency of using the above test in the evaluation of exercise tolerance in children 3 years of age and older.

Isolation of butanol- and isobutanol-tolerant bacteria and physiological characterization of their butanol tolerance.

Science.gov (United States)

Kanno, Manabu; Katayama, Taiki; Tamaki, Hideyuki; Mitani, Yasuo; Meng, Xian-Ying; Hori, Tomoyuki; Narihiro, Takashi; Morita, Naoki; Hoshino, Tamotsu; Yumoto, Isao; Kimura, Nobutada; Hanada, Satoshi; Kamagata, Yoichi

2013-11-01

Despite their importance as a biofuel production platform, only a very limited number of butanol-tolerant bacteria have been identified thus far. Here, we extensively explored butanol- and isobutanol-tolerant bacteria from various environmental samples. A total of 16 aerobic and anaerobic bacteria that could tolerate greater than 2.0% (vol/vol) butanol and isobutanol were isolated. A 16S rRNA gene sequencing analysis revealed that the isolates were phylogenetically distributed over at least nine genera: Bacillus, Lysinibacillus, Rummeliibacillus, Brevibacillus, Coprothermobacter, Caloribacterium, Enterococcus, Hydrogenoanaerobacterium, and Cellulosimicrobium, within the phyla Firmicutes and Actinobacteria. Ten of the isolates were phylogenetically distinct from previously identified butanol-tolerant bacteria. Two relatively highly butanol-tolerant strains CM4A (aerobe) and GK12 (obligate anaerobe) were characterized further. Both strains changed their membrane fatty acid composition in response to butanol exposure, i.e., CM4A and GK12 exhibited increased saturated and cyclopropane fatty acids (CFAs) and long-chain fatty acids, respectively, which may serve to maintain membrane fluidity. The gene (cfa) encoding CFA synthase was cloned from strain CM4A and expressed in Escherichia coli. The recombinant E. coli showed relatively higher butanol and isobutanol tolerance than E. coli without the cfa gene, suggesting that cfa can confer solvent tolerance. The exposure of strain GK12 to butanol by consecutive passages even enhanced the growth rate, indicating that yet-unknown mechanisms may also contribute to solvent tolerance. Taken together, the results demonstrate that a wide variety of butanol- and isobutanol-tolerant bacteria that can grow in 2.0% butanol exist in the environment and have various strategies to maintain structural integrity against detrimental solvents.

Evaluation of the effect of various beverages and food material on the color stability of provisional materials - An in vitro study.

Science.gov (United States)

Gupta, Gaurav; Gupta, Tina

2011-07-01

THIS STUDY EVALUATED THE COLOR STABILITY OF FOUR PROVISIONAL MATERIALS: 1) Poly-methyl methacrylates (DPI); 2) Bis-acryl composite (ProtempTM II - 3M ESPE); 3) Bis-acryl composite (Systemp® c and b - Ivoclar Vivadent) and 4) Light polymerized composite resin (Revotek LC- GC). The color and color difference of each specimen after immersion in different staining solutions i.e. 1) tea and artificial saliva, 2) coffee and artificial saliva, 3) Pepsi and artificial saliva, 4) turmeric solution and artificial saliva was measured using reflectance spectrophotometer with CIELAB system before immersion and after immersion at 2, 5 ,7 , 10 and 15 days. Revotek LC- GC (light polymerized composite resin) was found to be the most color stable provisional restorative material followed by Protemp II (Bis-acryl composite), Systemp (Bis-acryl composite) and DPI (Methylmethacrylate resin). Turmeric solution had the maximum staining potential followed by coffee, tea and Pepsi.

Elution of Monomers from Provisional Composite Materials

Directory of Open Access Journals (Sweden)

Simon Daniel Schulz

2015-01-01

Full Text Available The aim of this study was to evaluate the elution of substances from different materials used for the manufacturing of temporary indirect restorations, after storage in saliva and ethanol 75%. 10 samples of three chemically cured materials (Protemp 3 Garant, Systemp.c&b, and Trim and one light-cured material (Clip F were stored in saliva and ethanol 75% for 24 h, 7, and days 28 days. From the storage media at each time period, samples were prepared and analysed by LC-MS/MS, in order to access the elution of monomers. The results differed among the materials (P ≤ 0.05. No monomers were detected in the samples of Protemp 3 Garant and Clip F. Substances were detected only in ethanol samples of Systemp.c&b and Trim. The amount of BisGMA, TEGDMA, and UDMA 2 released from Systemp.c&b was higher compared to Trim. Storage time affected the release of substances (P ≤ 0.05. The highest release was observed within the first 24 h. It can be concluded that provisional resin composite materials do not show high release of monomers and this release is material dependent. However, the detection of additional peaks during the analysis, suggesting the formation of by-products of the eluted substances, may not be in favour of these materials with respect to their toxicity.

Gap analysis between provisional diagnosis and final diagnosis in government and private teaching hospitals: A record-linked comparative study

Directory of Open Access Journals (Sweden)

Sudeshna Chatterjee

2016-01-01

Full Text Available Aims: 1. To identify the extent of clinical gaps at the context of knowledge, practice and systems. 2. To formulate necessary intervention measures towards bridging the gaps. Settings and Design: Comparative, cross-sectional and non-interventional study. Methods and Material: It is retrospective, record-based study conducted upon inpatients (n = 200 of major disciplines of two teaching hospitals. Major outcome variables were to observe the matching and un-matching of final and provisional diagnosis by using ICD-10 criteria. Statistical Analysis Used: Comparative analysis of specific and selective gaps were estimated in terms of percentage (%. Results: Pilot observation showed the existence of gaps between provisional and final diagnosis in both private and government institution. Both knowledge and skill gaps were evident in caregivers and gap in documentation was existent in medical records. Conclusions: The pilot data is may be an eye-opener to public and private governance systems for understanding and revising the process service planning and service delivery. Necessary intervention measures may be contemplated towards enhancing diagnostic skill of doctors for quality hospital care.

A comparative evaluation of the marginal accuracy of crowns fabricated from four commercially available provisional materials: An in vitro study

Science.gov (United States)

Amin, Bhavya Mohandas; Aras, Meena Ajay; Chitre, Vidya

2015-01-01

Purpose: The purpose of this in vitro study was to evaluate and compare the primary marginal accuracy of four commercially available provisional materials (Protemp 4, Luxatemp Star, Visalys Temp and DPI tooth moulding powder and liquid) at 2 time intervals (10 and 30 min). Materials and Methods: A customized stainless steel master model containing two interchangeable dies was used for fabrication of provisional crowns. Forty crowns (n = 10) were fabricated, and each crown was evaluated under a stereomicroscope. Vertical marginal discrepancies were noted and compared at 10 min since the start of mixing and then at 30 min. Observations and Results: Protemp 4 showed the least vertical marginal discrepancy (71.59 μ), followed by Luxatemp Star (91.93 μ) at 10 min. DPI showed a marginal discrepancy of 95.94 μ while Visalys Temp crowns had vertical marginal discrepancy of 106.81 μ. There was a significant difference in the marginal discrepancy values of Protemp 4 and Visalys Temp. At 30 min, there was a significant difference between the marginal discrepancy of Protemp 4 crowns (83.11 μ) and Visalys Temp crowns (128.97 μ) and between Protemp 4 and DPI (118.88 μ). No significant differences were observed between Protemp 4 and Luxatemp Star. Conclusion: The vertical marginal discrepancy of temporary crowns fabricated from the four commercially available provisional materials ranged from 71 to 106 μ immediately after fabrication (at 10 min from the start of mix) to 83–128 μ (30 min from the start of mix). The time elapsed after mixing had a significant influence on the marginal accuracy of the crowns. PMID:26097348

The Provisional Staff Regulations of the Agency. An Amendment to Annex II

Energy Technology Data Exchange (ETDEWEB)

NONE

1960-11-30

On 17 June 1960 the Board of Governors amended Annex II, part B, paragraph 4 to the Provisional Staff Regulations of the Agency to read: '4. The Director General shall establish rules by which an extra payment may be made to a staff member in the General Service category who passes an appropriate test and demonstrates continued proficiency in the use of either two or more official languages, or in one official language and in the language of his duty station if that language is not his mother tongue. Such payment shall be equivalent to an additional step increment and may extend beyond the maximum salary of the grade of the staff member concerned.' and decided that this amendment should be effective as from 1 January 1960.

The Provisional Staff Regulations of the Agency. An Amendment to Annex II

International Nuclear Information System (INIS)

1960-01-01

On 17 June 1960 the Board of Governors amended Annex II, part B, paragraph 4 to the Provisional Staff Regulations of the Agency to read: '4. The Director General shall establish rules by which an extra payment may be made to a staff member in the General Service category who passes an appropriate test and demonstrates continued proficiency in the use of either two or more official languages, or in one official language and in the language of his duty station if that language is not his mother tongue. Such payment shall be equivalent to an additional step increment and may extend beyond the maximum salary of the grade of the staff member concerned.' and decided that this amendment should be effective as from 1 January 1960

CONSIDERATIONS REGARDING PROVISIONAL MEASURES FOR THE PROTECTION OF INTELLECTUAL PROPERTY RIGHTS IN ROMANIA

Directory of Open Access Journals (Sweden)

Paul-George BUTA

2014-05-01

Full Text Available The article takes a look at provisions in the Code of Civil Procedure dealing with the provisional measures that can be requested by the intellectual property right-holder in case of apparent infringements of his rights. Starting from the goals of such regulation, as provided by Directive 48/2004, the article examines what could be the hurdles imposed by the Romanian legislator (mostly by not providing sufficiently tailored means in respect of intellectual property rights on the right-holder and proposes that, in light of the problems as reflected in the courts' practice, a legislative intervention be undertaken in order to better adapt the means to the purpose envisaged.

The Effect Of A Provisional Sequestration Order - Does It Impose A Limitation To My Right To Be A Member Of Parliament?

Directory of Open Access Journals (Sweden)

Leonie Stander

2015-12-01

Full Text Available The question asked in this article is inspired by the recent case of Mr Julius Malema. Why the matter is so important and has enjoyed so much attention, is the fact that it was widely suggested that a final order of sequestration would affect Mr Malema's political career in that it would not be possible for him to continue to serve as Member of Parliament. The question that immediately comes to the fore is whether the provisional order of sequestration would not already result in such an outcome. As stipulated by the Constitution of the Republic of South Africa, 1996, an unrehabilitated insolvent may not become a member of the National Assembly, National Council of Provinces, or a Provincial Legislator. Do the words "unrehabilitated insolvent" also include a person who is under provisional sequestration? The purpose of this article is to investigate the effect of a provisional order of sequestration and the focus will be on the ability of an insolvent to act as a Member of Parliament. The legal position in the South African law will be compared with the legal position in the United States of America – which is, with regard to the insolvency law, recognized as a very successful, modern, progressive and dynamic legal system. Voluminous changes to the American bankruptcy law system, to adapt to current practical situations and the current economic climate, have been effected as recently as in 2005. Brief reference will also be made to the legal position in the United Kingdom, due to South Africa's historical ties with the UK and the reliance in the past on the English insolvency law and the Bankruptcy Act, 1986.

The DESCARTES-Nantes survey of kidney transplant recipients displaying clinical operational tolerance identifies 35 new tolerant patients and 34 almost tolerant patients.

Science.gov (United States)

Massart, Annick; Pallier, Annaïck; Pascual, Julio; Viklicky, Ondrej; Budde, Klemens; Spasovski, Goce; Klinger, Marian; Sever, Mehmet Sukru; Sørensen, Søren Schwartz; Hadaya, Karine; Oberbauer, Rainer; Dudley, Christopher; De Fijter, Johan W; Yussim, Alexander; Hazzan, Marc; Wekerle, Thomas; Berglund, David; De Biase, Consuelo; Pérez-Sáez, María José; Mühlfeld, Anja; Orlando, Giuseppe; Clemente, Katia; Lai, Quirino; Pisani, Francesco; Kandus, Aljosa; Baas, Marije; Bemelman, Frederike; Ponikvar, Jadranka Buturovic; Mazouz, Hakim; Stratta, Piero; Subra, Jean-François; Villemain, Florence; Hoitsma, Andries; Braun, Laura; Cantarell, Maria Carmen; Colak, Hulya; Courtney, Aisling; Frasca, Giovanni Maria; Howse, Matthew; Naesens, Maarten; Reischig, Tomas; Serón, Daniel; Seyahi, Nurhan; Tugmen, Cem; Alonso Hernandez, Angel; Beňa, Luboslav; Biancone, Luigi; Cuna, Vania; Díaz-Corte, Carmen; Dufay, Alexandre; Gaasbeek, André; Garnier, Arnaud; Gatault, Philippe; Gentil Govantes, Miguel Angel; Glowacki, François; Gross, Oliver; Hurault de Ligny, Bruno; Huynh-Do, Uyen; Janbon, Bénédicte; Jiménez Del Cerro, Luis Antonio; Keller, Frieder; La Manna, Gaetano; Lauzurica, Ricardo; Le Monies De Sagazan, Hervé; Thaiss, Friedrich; Legendre, Christophe; Martin, Séverine; Moal, Marie-Christine; Noël, Christian; Pillebout, Evangeline; Piredda, Gian Benedetto; Puga, Ana Ramírez; Sulowicz, Wladyslaw; Tuglular, Serhan; Prokopova, Michaela; Chesneau, Mélanie; Le Moine, Alain; Guérif, Pierrick; Soulillou, Jean-Paul; Abramowicz, Marc; Giral, Magali; Racapé, Judith; Maggiore, Umberto; Brouard, Sophie; Abramowicz, Daniel

2016-06-01

Kidney recipients maintaining a prolonged allograft survival in the absence of immunosuppressive drugs and without evidence of rejection are supposed to be exceptional. The ERA-EDTA-DESCARTES working group together with Nantes University launched a European-wide survey to identify new patients, describe them and estimate their frequency for the first time. Seventeen coordinators distributed a questionnaire in 256 transplant centres and 28 countries in order to report as many 'operationally tolerant' patients (TOL; defined as having a serum creatinine <1.7 mg/dL and proteinuria <1 g/day or g/g creatinine despite at least 1 year without any immunosuppressive drug) and 'almost tolerant' patients (minimally immunosuppressed patients (MIS) receiving low-dose steroids) as possible. We reported their number and the total number of kidney transplants performed at each centre to calculate their frequency. One hundred and forty-seven questionnaires were returned and we identified 66 TOL (61 with complete data) and 34 MIS patients. Of the 61 TOL patients, 26 were previously described by the Nantes group and 35 new patients are presented here. Most of them were noncompliant patients. At data collection, 31/35 patients were alive and 22/31 still operationally tolerant. For the remaining 9/31, 2 were restarted on immunosuppressive drugs and 7 had rising creatinine of whom 3 resumed dialysis. Considering all patients, 10-year death-censored graft survival post-immunosuppression weaning reached 85% in TOL patients and 100% in MIS patients. With 218 913 kidney recipients surveyed, cumulative incidences of operational tolerance and almost tolerance were estimated at 3 and 1.5 per 10 000 kidney recipients, respectively. In kidney transplantation, operational tolerance and almost tolerance are infrequent findings associated with excellent long-term death-censored graft survival. © The Author 2016. Published by Oxford University Press on behalf of ERA-EDTA. All rights reserved.

Evaluation of the effect of various beverages and food material on the color stability of provisional materials – An in vitro study

Science.gov (United States)

Gupta, Gaurav; Gupta, Tina

2011-01-01

Aim: This study evaluated the color stability of four provisional materials: 1) Poly-methyl methacrylates (DPI); 2) Bis-acryl composite (ProtempTM II – 3M ESPE); 3) Bis-acryl composite (Systemp® c and b – Ivoclar Vivadent) and 4) Light polymerized composite resin (Revotek LC- GC). Materials and Methods: The color and color difference of each specimen after immersion in different staining solutions i.e. 1) tea and artificial saliva, 2) coffee and artificial saliva, 3) Pepsi and artificial saliva, 4) turmeric solution and artificial saliva was measured using reflectance spectrophotometer with CIELAB system before immersion and after immersion at 2, 5 ,7 , 10 and 15 days. Results: Revotek LC- GC (light polymerized composite resin) was found to be the most color stable provisional restorative material followed by Protemp II (Bis-acryl composite), Systemp (Bis-acryl composite) and DPI (Methylmethacrylate resin). Turmeric solution had the maximum staining potential followed by coffee, tea and Pepsi. PMID:22025835

The precautionary principle as a provisional instrument in environmental policy: The Montreal Protocol case study

International Nuclear Information System (INIS)

Jacobs, J. Roger

2014-01-01

Highlights: • I examine whether a policy invoked under the Precautionary Principle can move beyond provisional status. • I review the certainty of conclusions based upon the Global Ozone Research and Monitoring Project. • There is high certainty that anthropogenic ozone depletion has health consequences in polar regions. • Current research focuses on long term projections of risk that perpetuates high uncertainty. • Establishment of a community to generate Assessments acts to perpetuate the period of uncertainty. - Abstract: Environmental studies identify possible threats to the health of the public or the environment when the scientific certainty of risk is low, but the potential cost is high. Governments may respond by invoking the Precautionary Principle, holding that scientific certainty is not required to take actions that reduce possible risk. EU guidelines suggest that precautionary measures remain provisional until sufficient scientific certainty is generated. Here I study the Scientific Assessments produced for the Montreal Protocol, and the scientific community that generates them, and ask whether a long-standing program of scientific investigation and monitoring can generate sufficient scientific certainty to move beyond dependence on the Precautionary Principle. When the Montreal Protocol was ratified, many scientists strongly suspected that anthropogenic substances like chlorofluorocarbons were depleting stratospheric ozone. Although the risk was uncertain, the perceived cost to public health of ozone depletion was high. A quarter century after formulating the Montreal Protocol, science can define the conditions for ozone depletion with great certainty, but uncertainty remains in determining the scale and distribution of the attributable increase in damaging ultra-violet (UV) radiation. Organisations, such as NASA, and scientists that contribute to the Scientific Assessments comprise the community in which the scientific consensus of risk is

Redesign of a fixture mount to be used as an impression coping and a provisional abutment as well

OpenAIRE

Chang, Glenn Hsuan-Chen; Tian, Chen; Hung, Yuen-Siang

2011-01-01

Purpose: An integrated fixture mount/impression coping/ temporary abutment can provide many advantages for immediate loading of dental implants, such as simpler procedure, less chair time, cost reduction, and comfort for the patients. Materials and Methods: A newly designed dental implant fixture mount (DIFMA) can be used as an impression coping for taking an immediate impression. An immediate load provisional prosthesis can then be fabricated shortly after implant placement to immediately lo...

Immediate Loading of Implants in the Edentulous Maxilla with a Fixed Provisional Restoration without Bone Augmentation: A Report on 5-Year Outcomes Data Obtained from a Prospective Clinical Trial.

Science.gov (United States)

Toljanic, Joseph A; Ekstrand, Karl; Baer, Russell A; Thor, Andreas

2016-01-01

Successful immediate loading of implants in the edentulous maxilla has been previously reported. The purpose of this 5-year prospective study was to further assess long-term outcomes following immediate loading of implants in the edentulous maxilla with fixed provisional restorations without the use of bone augmentation procedures. Subjects with edentulous maxillary arches each received six implants placed in native bone without augmentation. Where insufficient posterior bone volume existed, angled implant placement was employed. Fixed provisional restorations were delivered within 24 hours of implant placement. Implant placement locations, insertion torque values, and implant dimensions were recorded. Definitive fixed prostheses were placed within 24 weeks following implantation. Baseline implant site marginal bone levels were measured using periapical radiographs. Baseline peri-implant plaque and bleeding scores were obtained. Subjects were examined 6 months after implant placement and then annually for 5 years with follow-up periapical radiographs and plaque/bleeding scores obtained. Fifty-one subjects received a total of 306 implants. Forty subjects with 232 implants returned for the final follow-up appointment representing a 5-year implant survival proportion of 93% with a mean marginal bone loss of 0.44 ± 1.25 mm for this group. Thirty-nine of these 40 subjects continued to function with fixed restorations with the remaining subject functioning with a non-implant-retained removable prosthesis. Within the limitations of this study, predictable long-term implant rehabilitation outcomes were demonstrated for the edentulous maxilla using an immediate loading protocol without bone augmentation.

Proceedings of the Second OECD/NEA Organisation Meeting on Increased Accident Tolerance of Fuels for LWRs

International Nuclear Information System (INIS)

Massara, Simone; ); Bragg-Sitton, Shannon; Braase, Lori; Merrill, Brad; Teague, Melissa; Stanek, Chris R.; Montgomery, Robert H.; Ott, Larry J.; Robb, Kevin; Snead, Lance; Farmer, Mitch; Billone, Michael C.; Todosow, Michael; Brown, Nicholas; Brachet, J.C.; Le Flem, M.; Sauder, C.; Idarraga-Trujillo, I.; Michaux, A.; Lorrette, C.; Le Saux, M.; Blanpain, P.; Park, Jeong-Yong; Yang, Jae-Ho; Kim, Weon-Ju; Koo, Yang-Hyun; Liu, T.; Hallstadius, Lars; Lahoda, Ed; Waeckel, N.; Bonnet, J.M.; Vitanza, Carlo; Ohta, Hirokazu; Ogata, Takanari; Nakamura, Kinya; Dyck, Gary; Inozemtsev, Victor; )

2013-01-01

(N. Waeckel, EDF); 10 - Accident scenarios of interest (L. Ott, ORNL); 11 - Modelling tools (J.M. Bonnet, IRSN); 12 - Facilities and potential intermediate-term ATF development (L. Snead, ORNL); 13 - Experimental needs for assessment and validation (C. Vitanza, OECD-Halden); 14 - Development plan of Accident Tolerant Control Rod in Japan (H. Ohta, CRIEPI). Session 3: Organisations expectations and provisional contribution to a collaborative activity on ATF: 15 - Links with IAEA activity (G. Dyck). Session 4 - Collaborative framework: 16 - Examples of NEA Committees Structure (J. Gulliford, NEA)

Tolerance

DEFF Research Database (Denmark)

Tønder, Lars

is linked to a different set of circumstances than the ones suggested by existing models in contemporary democratic theory. Reorienting the discussion of tolerance, the book raises the question of how to disclose new possibilities within our given context of affect and perception. Once we move away from......Tolerance: A Sensorial Orientation to Politics is an experiment in re-orientation. The book is based on the wager that tolerance exceeds the more prevalent images of self-restraint and repressive benevolence because neither precludes the possibility of a more “active tolerance” motivated...... by the desire to experiment and to become otherwise. The objective is to discuss what gets lost, conceptually as well as politically, when we neglect the subsistence of active tolerance within other practices of tolerance, and to develop a theory of active tolerance in which tolerance's mobilizing character...

Atmospheric deposition of trace elements around point sources and human health risk assessment. I: Impact zones around a lead source

DEFF Research Database (Denmark)

Moseholm, L.; Larsen, Erik Huusfeldt; Andersen, B.

1992-01-01

The deposition of lead was monitored over 8 years in the area around a car battery factory north of Copenhagen, Denmark. The area also has heavy traffic. Deposition was measured by in-situ grown vegetables, transplant grass culture biomonitors, bulk deposition and soil samples. Three impact zones...... were identified by a multivariate statistical analysis. Within each zone, the total dietary intake of lead was estimated for adults and children as a percentage of the provisional tolerably weekly intake (PTWI), and as a result recommendation on restrictions in use of locally grown fruit and vegetables...

Heritability of cold tolerance in Nile tilapia, Oreochromis niloticus, juveniles

NARCIS (Netherlands)

Charo-Karisa, H.; Rezk, M.A.; Bovenhuis, H.; Komen, J.

2005-01-01

The inability of tilapia to tolerate low temperatures is of major economic concern as it reduces their growing season and leads to over winter mortality. In this study, cold tolerance of juvenile Nile tilapia, Oreochromis niloticus, was investigated and heritability estimates obtained. A total of 80

New protocol for construction of eyeglasses-supported provisional nasal prosthesis using CAD/CAM techniques.

Science.gov (United States)

Ciocca, Leonardo; Fantini, Massimiliano; De Crescenzio, Francesca; Persiani, Franco; Scotti, Roberto

2010-01-01

A new protocol for making an immediate provisional eyeglasses-supported nasal prosthesis is presented that uses laser scanning, computer-aided design/computer-aided manufacturing procedures, and rapid prototyping techniques, reducing time and costs while increasing the quality of the final product. With this protocol, the eyeglasses were digitized, and the relative position of the nasal prosthesis was planned and evaluated in a virtual environment without any try-in appointment. This innovative method saves time, reduces costs, and restores the patient's aesthetic appearance after a disfiguration caused by ablation of the nasal pyramid better than conventional restoration methods. Moreover, the digital model of the designed nasal epithesis can be used to develop a definitive prosthesis anchored to osseointegrated craniofacial implants.

Pre-prosthetic minor tooth movement with elastic separating ring & provisional restoration modification: case report

Directory of Open Access Journals (Sweden)

Haneol Shin

2012-05-01

Full Text Available Proximal caries or coronal defect in posterior teeth may result in the loss of proximal space and drifting of neighboring teeth, which makes restoration difficult. Inability to restore proper contours and to align tooth axis properly are commonly encountered problems when planning tooth restoration. Moreover, tilted teeth aggravate periodontal tissue breakdown, such as pseudo-pocket, and angular osseous defect. The purpose of this case presentation is to describe a simple technique for inducing minor tooth movement with orthodontic separating ring and provisional restoration modification. This method was used to create crown placement space on mesially tilted molar. This method is easy, simple and efficient technique which could be used in interproximal space gaining in selected situation.

Impact of the lay-off length on +Gz tolerance.

Science.gov (United States)

Mikuliszyn, Romuald; Kowalski, Wieslaw; Kowalczuk, Krzysztof

2002-07-01

There are many factors affecting pilots' +Gz-tolerance. Recently, attention of the aviation community has been focused on lay-off and it's impact on +Gz-tolerance. Pilots of the Polish Air Force (PAF) have dealt with that problem for several years now. The aim of the study was to provide insight on how lay-off periods with different duration impact +Gz-tolerance. 95 male jet pilots from the PAF participated in the study. Every one had at least two weeks lay-off period (non-medical reasons). Subjects were divided into four groups according to the length of lay-off period (2-4 weeks; 5-13 weeks; 14-26 weeks; 27-154 weeks), All pilots were subjected to a centrifuge exposure in GOR (0.1 G/s) or ROR (1.0 G/s) profiles, depending on the pre-lay-off exposure. Post-lay-off exposures were carried out directly after lay-off. 18 jet pilots without any lay-off constituted the control group. The difference between pre- and post-lay-off G-tolerance limit (-0,93 +/- 0,53) was statistically significant (p<0.01) only for one group, where lay-off period ranged between two and four weeks. No statistically significant differences were found where influence of other factors like total and yearly flight hours, heart rate gain (AHR) or physical activity measured as maximal oxygen intake were considered. 2-4 weeks of lay-off period decreases +Gz tolerance is statistically significant manner. Subsequent increase of lay-off period does not result in mean tolerance changes for group, however in certain individuals critical decrement of +Gz tolerance occurs. Total and last year flying hours, physical fitness does not modify impact of lay-off period on +Gz tolerance.

Industrial Cost-Benefit Assessment for Fault-tolerant Control Systems

DEFF Research Database (Denmark)

Thybo, C.; Blanke, M.

1998-01-01

Economic aspects are decisive for industrial acceptance of research concepts including the promising ideas in fault tolerant control. Fault tolerance is the ability of a system to detect, isolate and accommodate a fault, such that simple faults in a sub-system do not develop into failures....... The objective of this paper is to help, in the early product development state, to find the economical most suitable scheme. A salient result is that with increased customer awareness of total cost of ownership, new products can benefit significantly from applying fault tolerant control principles....

Osteogenic potential of mesenchymal cells embedded in the provisional matrix after a 6-week healing period in augmented and non-augmented extraction sockets: an immunohistochemical prospective pilot study in humans.

Science.gov (United States)

Heberer, Susanne; Wustlich, Alexander; Lage, Hermann; Nelson, John J; Nelson, Katja

2012-01-01

The aim of the present clinical study was the evaluation of the osteogenic potential of mesenchymal cells embedded in the provisional matrix of non-augmented and with Bio-Oss collagen-augmented human extraction sockets after 6 weeks of healing time. Twenty-five patients with 47 extraction sites participated in the present study. After tooth removal, the extraction sockets were augmented with Bio-Oss collagen or not augmented. At implant placement, bone biopsies of the extraction sockets were obtained. The immunohistochemical analysis of the osteogenic potential of the mesenchymal cells in the provisional matrix was performed using three monoclonal antibodies: core-binding factor α1 (Cbfa1)/runt-related protein (Runx)2, osteonectin (OSN/secreted protein acidic and rich in cyst [SPARC]) and osteocalcin (OC). The statistical analysis was performed using two-factorial analysis for repeated measures, Mann-Whitney U-test and Spearman's rank-order correlation coefficient. Of 47 extraction sockets examined, 17 sockets demonstrated an almost complete ossification. Hence, the provisional matrix of the 30 remaining extraction sockets (21 non-augmented, 9 augmented) was immunohistochemically investigated. No evidence of acute or chronic inflammation was noted in any of the specimens. In the provisional matrix of the non-grafted socket, the median amount of Cbfa1/Runx2-positive cells was 72.3%, of OSN (SPARC) 66.9% and of OC 23.4%, whereas in the grafted sockets the median rate of immunopositive cells staining with Cbfa1/Runx2 was 73.3%, of OSN (SPARC) 61.4% and of OC 20.1%. There was no significant difference in the proportion of positive cells expressed by Cbfa1/Runx2, OSN/SPARC and OC between the grafted and non-grafted socket. Furthermore, the cell density did not correlate to the quantity of stained cells independent of the used proteins. After a 6-week healing period, the provisional matrix was demonstrated to have a high proportion of cells displaying a maturation of

Tolerance design of patient-specific range QA using the DMAIC framework in proton therapy.

Science.gov (United States)

Rah, Jeong-Eun; Shin, Dongho; Manger, Ryan P; Kim, Tae Hyun; Oh, Do Hoon; Kim, Dae Yong; Kim, Gwe-Ya

2018-02-01

To implement the DMAIC (Define-Measure-Analyze-Improve-Control) can be used for customizing the patient-specific QA by designing site-specific range tolerances. The DMAIC framework (process flow diagram, cause and effect, Pareto chart, control chart, and capability analysis) were utilized to determine the steps that need focus for improving the patient-specific QA. The patient-specific range QA plans were selected according to seven treatment site groups, a total of 1437 cases. The process capability index, C pm was used to guide the tolerance design of patient site-specific range. For prostate field, our results suggested that the patient range measurements were capable at the current tolerance level of ±1 mm in clinical proton plans. For other site-specific ranges, we analyzed that the tolerance tends to be overdesigned to insufficient process capability calculated by the patient-specific QA data. The customized tolerances were calculated for treatment sites. Control charts were constructed to simulate the patient QA time before and after the new tolerances were implemented. It is found that the total simulation QA time was decreased on average of approximately 20% after establishing new site-specific range tolerances. We simulated the financial impact of this project. The QA failure for whole process in proton therapy would lead up to approximately 30% increase in total cost. DMAIC framework can be used to provide an effective QA by setting customized tolerances. When tolerance design is customized, the quality is reasonably balanced with time and cost demands. © 2017 American Association of Physicists in Medicine.

Proteomics of desiccation tolerance during development and germination of maize embryos

DEFF Research Database (Denmark)

Huang, Hui; Møller, Ian Max; Song, Song-Quan

2012-01-01

Maize seeds were used to identify the key embryo proteins involved in desiccation tolerance during development and germination. Immature maize embryos (28N) during development and mature embryos imbibed for 72 h (72HN) are desiccation sensitive. Mature maize embryos (52N) during development...... pattern. We infer that these eleven proteins are involved in seed desiccation tolerance. We conclude that desiccation-tolerant embryos make more economical use of their resources to accumulate protective molecules and antioxidant systems to deal with maturation drying and desiccation treatment........ are desiccation tolerant. Thiobarbituric acid reactive substance and hydrogen peroxide contents decreased and increased with acquisition and loss of desiccation tolerance, respectively. A total of 111 protein spots changed significantly (1.5 fold increase/decrease) in desiccation-tolerant and -sensitive embryos...

Spiritual well-being and quality of life among Icelanders receiving palliative care: data from Icelandic pilot-testing of a provisional measure of spiritual well-being from the European Organisation for Research and Treatment of Cancer.

Science.gov (United States)

Asgeirsdottir, G H; Sigurdardottir, V; Gunnarsdottir, S; Sigurbjörnsson, E; Traustadottir, R; Kelly, E; Young, T; Vivat, B

2017-03-01

Palliative care focuses on improving quality of life (QoL). This study examined the feasibility of the Icelandic version of a provisional European Organisation for Research and Treatment of Cancer (EORTC) measure of spiritual well-being (SWB), and explored the relationship between SWB and QoL for palliative care patients in Iceland. Instruments from the EORTC were used: the provisional measure of SWB, which was undergoing pilot-testing in Iceland, and the EORTC QLQ C15-PAL. The correlation between scores was examined and descriptive statistics were used. Structured interviews explored feasibility. Thirty persons participated with average age 72 years. Belief in God or a higher power had the mean 3.33 on a 1-4 scale and the mean for overall SWB was 5.73 on a 1-7 scale. The mean score for global health/QoL was 59.4, physical functioning 48.5 and emotional functioning 78.9 on a 0-100 scale. Overall QoL was positively correlated with SWB showing r(30) = 0.386, P = 0.035. The participants found that answering the provisional EORTC QLQ-SWB prompted an emotional response and took the opportunity to discuss the subject. The provisional SWB measure was found relevant for the Icelandic context, and the study indicates that SWB and QoL are closely connected. © 2015 John Wiley & Sons Ltd.

Screening for drought tolerance in cultivars of the ornamental genus Tagetes (Asteraceae

Directory of Open Access Journals (Sweden)

Raluca Cicevan

2016-06-01

Full Text Available Drought tolerance was evaluated in twelve cultivars of three ornamental Tagetes species (T. patula, T. tenuifolia and T. erecta. A stress treatment was performed by completely stopping watering of plants maintained in controlled greenhouse conditions. After three weeks, several plant growth parameters (stem length (SL, fresh weight (FW and water content (WC, photosynthetic pigments (chlorophylls and carotenoids (Car, osmolytes (proline (Pro, glycine betaine (GB and total soluble sugars (TSS, an oxidative stress maker (malondialdehyde (MDA and antioxidants (total phenolic compounds (TPC and total flavonoids (TF were measured. Considerable differences in the evaluated traits were found among the control and drought-stressed plants. Drought stress generally caused a marked reduction in plant growth and carotenoid pigments, and an increase in soluble solutes and oxidative stress. For most cultivars, proline levels in stressed plants increased between 30 and 70-fold compared to the corresponding controls. According to the different measured parameters, on average T. erecta proved to be more tolerant to drought than T. patula and T. tenuifolia. However, a considerable variation in the tolerance to drought was found within each species. The traits with greater association to drought tolerance as well as the most tolerant cultivars could be clearly identified in a principal components analysis (PCA. Overall, our results indicate that drought tolerant cultivars of Tagetes can be identified at early stages using a combination of plant growth and biochemical markers.

Upper lower Cambrian (provisional Cambrian Series 2 trilobites from northwestern Gansu Province, China

Directory of Open Access Journals (Sweden)

Jan Bergström†

2014-08-01

Full Text Available Upper lower Cambrian (provisional Cambrian Series 2 trilobites are described from three sections through the Shuangyingshan Formation in the Beishan area, northwestern Gansu Province, China. The trilobite fauna is dominated by eodiscoid and corynexochid trilobites, together representing at least ten genera: Serrodiscus, Tannudiscus, Calodiscus, Pagetides, Kootenia, Edelsteinaspis, Ptarmiganoides?, Politinella, Dinesus and Subeia. Eleven species are described, of which seven are identified with previously described taxa and four described under open nomenclature. The composition of the fauna suggests biogeographic affinity with Siberian rather than Gondwanan trilobite faunas, and the Cambrian Series 2 faunas described herein and from elsewhere in northwestern China seem to be indicative of the marginal areas of the Siberian palaeocontinent. This suggests that the Middle Tianshan–Beishan Terrane may have been located fairly close to Siberia during middle–late Cambrian Epoch 2.

Assessment of Reduced Tolerance to Sound (Hyperacusis in University Students

Directory of Open Access Journals (Sweden)

Sule Yilmaz

2017-01-01

Full Text Available Introduction: Hyperacusis is defined as a reduction in tolerance to ordinary environmental sounds. Hyperacusis can occur in individuals of all age groups, making daily life difficult for the sufferers. Although there is no objective test to accurately diagnose hyperacusis, questionnaires are useful for the assessment of hyperacusis. The aim of this study was to explore the reduced sound tolerance in university students using a hyperacusis questionnaire (HQ. Materials and Methods: A total of 536 university students (300 females and 236 males aged between 18 and 25 years, with a mean age of 21.34 ± 1.87 years, were assessed using an HQ developed by Khalfa. The mean total score of all the participants was 16.34 ± 7.91, and 5.78% of the participants had total scores indicating hyperacusis, where a majority of them were females. Results: Females had significantly higher scores than men in terms of both the total and the attentional and emotional dimensions. The scores of the participants who reported noise exposure or a decrease in their tolerance to noise were significantly higher than those of the other participants. Even among young adults, there was a group of participants suffering from some problems related to decreased tolerance to everyday sounds. Discussion: Although the Turkish translation of the HQ seems to be a reliable tool for evaluating hyperacusis in young adults, further work with various populations of different age groups is required to establish validity and to assess the psychometric qualities of the Turkish form.

Radiation tolerance of the WorldFIP fieldbus interface

CERN Document Server

Wijnands, Thijs

2006-01-01

This paper summarises on radiation tests on the main components for the WorldFIP fieldbus interface. The chipset based on 0.6 \\mu­m technology has a total dose tolerance of 100 Gy (Co-60) and in standalone mode, no functional interrupts from single events have been observed during proton irradiation (60 MeV). The chipset based on 0.5 \\mu­m technology has a total dose tolerance of 150 Gy (Co-60) but shows a sharp increase in the single event cross section after a dose of 70 Gy. Finally, it was found that the chipset based on 0.5 \\mu­m technology operates reliable in standalone mode in a magnetic field up to 4.6 kGauss.

Predicting Neuroinflammation in Morphine Tolerance for Tolerance Therapy from Immunostaining Images of Rat Spinal Cord.

Directory of Open Access Journals (Sweden)

Shinn-Long Lin

Full Text Available Long-term morphine treatment leads to tolerance which attenuates analgesic effect and hampers clinical utilization. Recent studies have sought to reveal the mechanism of opioid receptors and neuroinflammation by observing morphological changes of cells in the rat spinal cord. This work proposes a high-content screening (HCS based computational method, HCS-Morph, for predicting neuroinflammation in morphine tolerance to facilitate the development of tolerance therapy using immunostaining images for astrocytes, microglia, and neurons in the spinal cord. HCS-Morph first extracts numerous HCS-based features of cellular phenotypes. Next, an inheritable bi-objective genetic algorithm is used to identify a minimal set of features by maximizing the prediction accuracy of neuroinflammation. Finally, a mathematic model using a support vector machine with the identified features is established to predict drug-treated images to assess the effects of tolerance therapy. The dataset consists of 15 saline controls (1 μl/h, 15 morphine-tolerant rats (15 μg/h, and 10 rats receiving a co-infusion of morphine (15 μg/h and gabapentin (15 μg/h, Sigma. The three individual models of astrocytes, microglia, and neurons for predicting neuroinflammation yielded respective Jackknife test accuracies of 96.67%, 90.00%, and 86.67% on the 30 rats, and respective independent test accuracies of 100%, 90%, and 60% on the 10 co-infused rats. The experimental results suggest that neuroinflammation activity expresses more predominantly in astrocytes and microglia than in neuron cells. The set of features for predicting neuroinflammation from images of astrocytes comprises mean cell intensity, total cell area, and second-order geometric moment (relating to cell distribution, relevant to cell communication, cell extension, and cell migration, respectively. The present investigation provides the first evidence for the role of gabapentin in the attenuation of morphine tolerance from

Studies on heat tolerance in the freshwater crab, barytelphusa cunicularis (Westwood, 1836)

Energy Technology Data Exchange (ETDEWEB)

Didwan, A D; Nagabhushanam, R

1976-07-31

The freshwater crab, Barytelphusa cunicularis was used to study the effect of temperature and salinity on heat tolerance. Two sets of experiments were conducted to determine if these factors cause a resulting change in the upper temperature tolerance. Changes in the total water content, total protein, fat, glycogen and blood glucose were studied after acclimation to different temperatures. High temperature acclimation generally increased resistance to lethal temperatures whereas acclimation to salinity, either at high or low temperature, decreased it. A combination of high temperature and normal freshwater was the most favorable to withstand the high test tolerance temperature. The water content, glycogen and blood sugar level increased with the rise in temperature while fat and protein content increased with a decrease in temperature. (MU)

Provisional versus elective two-stent strategy for unprotected true left main bifurcation lesions: Insights from a FAILS-2 sub-study.

Science.gov (United States)

Kawamoto, Hiroyoshi; Chieffo, Alaide; D'Ascenzo, Fabrizio; Jabbour, Richard J; Naganuma, Toru; Cerrato, Enrico; Ugo, Fabrizio; Pavani, Marco; Varbella, Ferdinando; Boccuzzi, Giacomo; Pennone, Mauro; Garbo, Roberto; Conrotto, Federico; Biondi-Zoccai, Giuseppe; D'Amico, Maurizio; Moretti, Claudio; Escaned, Javier; Gaita, Fiorenzo; Nakamura, Sunao; Colombo, Antonio

2018-01-01

This study sought to investigate the optimal percutaneous coronary intervention (PCI) strategy for true unprotected left main coronary artery (ULMCA) bifurcations. The FAILS-2 was a retrospective multi-center study including patients with ULMCA disease treated with second-generation drug-eluting stents. Of these, we compared clinical outcomes of a provisional strategy (PS; n=216) versus an elective two-stent strategy (E2S; n=161) for true ULMCA bifurcations. The primary endpoint was the incidence of major adverse cardiac events (MACEs) at 3-years. We further performed propensity-score adjustment for clinical outcomes. There were no significant differences between the groups in terms of patient and lesion characteristics. 9.7% of patients in the PS group crossed over to a provisional two-stent strategy. MACEs were not significantly different between groups (MACE at 3-year; PS 28.1% vs. E2S 28.9%, adjusted p=0.99). The rates of target lesion revascularization (TLR) on the circumflex artery (LCX) were numerically high in the E2S group (LCX-TLR at 3-years; PS 11.8% vs. E2S 16.6%, adjusted p=0.51). E2S was associated with a comparable MACE rate to PS for true ULMCA bifurcations. The rates of LCX-TLR tended to be higher in the E2S group although there was no statistical significance. This study sought to compare the clinical outcomes of a provisional strategy (PS) with an elective two-stent strategy (E2S) for the treatment of true unprotected left main coronary artery bifurcations. 377 Patients (PS 216 vs. E2S 161 patients) were evaluated, and 9.7% in the PS group crossed over to a two-stent strategy. E2S was associated with a similar major adverse cardiac event rate at 3-years when compared to the PS strategy (PS 28.1% vs. E2S 28.9%, p=0.99). However, the left circumflex artery TLR rate at 3-year tended to be higher in the E2S group (PS 11.8% vs. E2S 16.6%, p=0.51). Copyright © 2017 Elsevier B.V. All rights reserved.

Immediate occluding definitive partial fixed prosthesis versus non-occluding provisional restorations - 4-month post-loading results from a pragmatic multicenter randomised controlled trial.

Science.gov (United States)

Heinemann, Friedhelm; Grufferty, Brendan; Papavasiliou, George; Dominiak, Marzena; García, Jaime Jiménez; Trullenque-Eriksson, Anna; Esposito, Marco

2016-01-01

To compare the clinical outcome of dental implants restored with definitive occluding partial fixed prostheses within 1 week, after implant placement with immediate non-occluding provisional restorations, which were to be replaced by definitive prostheses after 4 months. Fifty partially edentulous patients treated with one to three dental implants, at least 8.5 mm long and 4.0 mm wide inserted with a torque of at least 35 Ncm, were randomised in two groups of 25 patients each, to be immediately loaded with partial fixed prostheses. Patients of one group received one definitive screw-retained metal-ceramic prosthesis in occlusion within 1 week after placement. Patients of the other group received one non-occluding provisional acrylic reinforced prosthesis within 24 h after implant placement. Provisional prostheses were replaced after 4 months by definitive ones. The follow-up for all patients was 4-months post-loading. Outcome measures were prosthesis and implant failures, any complications, peri-implant marginal bone level changes, aesthetic evaluation by a clinician, patient satisfaction, chair time and number of visits at the dental office from implant placement to delivery of definitive restorations. No patient dropped out. Two immediately occlusally loaded implants with their related definitive prostheses (8%) failed early (difference in proportions = 0.08; 95% CI: -0.03 to 0.19; P = 0.490). Four complications occurred in the occlusal group versus one in the non-occlusal group; (difference in proportions = 0.12; 95% CI: -0.04 to 0.28; P = 0.349). Four months after loading, patients subjected to non-occlusal loading lost an average of 0.72 mm of peri-implant bone versus 0.99 mm of patients restored with occluding definitive partial fixed prostheses. There were no statistically significant differences for marginal bone level changes between the two groups (mean difference = -0.27 mm; 95% CI: -0.84 to 0.30; P = 0.349). The differences for aesthetic scores showed

Emergency department external fixation for provisional treatment of pilon and unstable ankle fractures

Directory of Open Access Journals (Sweden)

Craig R Lareau

2015-01-01

Full Text Available Unstable ankle fractures and impacted tibial pilon fractures often benefit from provisional external fixation as a temporizing measure prior to definitive fixation. Benefits of external fixation include improved articular alignment, decreased articular impaction, and soft tissue rest. Uniplanar external fixator placement in the Emergency Department (ED ex-fix is a reliable and safe technique for achieving ankle reduction and stability while awaiting definitive fixation. This procedure involves placing transverse proximal tibial and calcaneal traction pins and connecting the pins with two external fixator rods. This technique is particularly useful in austere environments or when the operating room is not immediately available. Additionally, this bedside intervention prevents the patient from requiring general anesthesia and may be a cost-effective strategy for decreasing valuable operating time. The ED ex-fix is an especially valuable procedure in busy trauma centers and during mass casualty events, in which resources may be limited.

Workplace exposure to nanoparticles and the application of provisional nanoreference values in times of uncertain risks

Science.gov (United States)

van Broekhuizen, Pieter; van Broekhuizen, Fleur; Cornelissen, Ralf; Reijnders, Lucas

2012-03-01

Nano reference values (NRVs) for occupational use of nanomaterials were tested as provisional substitute for Occupational Exposure Limits (OELs). NRVs can be used as provisional limit values until Health-Based OELs or derived no-effect levels (DNEL) become available. NRVs were defined for 8 h periods (time weighted average) and for short-term exposure periods (15 min-time weighted average). To assess the usefulness of these NRVs, airborne number concentrations of nanoparticles (NPs) in the workplace environment were measured during paint manufacturing, electroplating, light equipment manufacturing, non-reflective glass production, production of pigment concentrates and car refinishing. Activities monitored were handling of solid engineered NPs (ENP), abrasion, spraying and heating during occupational use of nanomaterials (containing ENPs) and machining nanosurfaces. The measured concentrations are often presumed to contain ENPs as well as process-generated NPs (PGNP). The PGNP are found to be a significant source for potential exposure and cannot be ignored in risk assessment. Levels of NPs identified in workplace air were up to several millions of nanoparticles/cm3. Conventional components in paint manufacturing like CaCO3 and talc may contain a substantial amount of nanosized particulates giving rise to airborne nanoparticle concentrations. It is argued that risk assessments carried out for e.g. paint manufacturing processes using conventional non-nano components should take into account potential nanoparticle emissions as well. The concentrations measured were compared with particle-based NRVs and with mass-based values that have also been proposed for workers protection. It is concluded that NRVs can be used for risk management for handling or processing of nanomaterials at workplaces provided that the scope of NRVs is not limited to ENPs only, but extended to the exposure to process-generated NPs as well.

Workplace exposure to nanoparticles and the application of provisional nanoreference values in times of uncertain risks

International Nuclear Information System (INIS)

Broekhuizen, Pieter van; Broekhuizen, Fleur van; Cornelissen, Ralf; Reijnders, Lucas

2012-01-01

Nano reference values (NRVs) for occupational use of nanomaterials were tested as provisional substitute for Occupational Exposure Limits (OELs). NRVs can be used as provisional limit values until Health-Based OELs or derived no-effect levels (DNEL) become available. NRVs were defined for 8 h periods (time weighted average) and for short-term exposure periods (15 min-time weighted average). To assess the usefulness of these NRVs, airborne number concentrations of nanoparticles (NPs) in the workplace environment were measured during paint manufacturing, electroplating, light equipment manufacturing, non-reflective glass production, production of pigment concentrates and car refinishing. Activities monitored were handling of solid engineered NPs (ENP), abrasion, spraying and heating during occupational use of nanomaterials (containing ENPs) and machining nanosurfaces. The measured concentrations are often presumed to contain ENPs as well as process-generated NPs (PGNP). The PGNP are found to be a significant source for potential exposure and cannot be ignored in risk assessment. Levels of NPs identified in workplace air were up to several millions of nanoparticles/cm 3 . Conventional components in paint manufacturing like CaCO 3 and talc may contain a substantial amount of nanosized particulates giving rise to airborne nanoparticle concentrations. It is argued that risk assessments carried out for e.g. paint manufacturing processes using conventional non-nano components should take into account potential nanoparticle emissions as well. The concentrations measured were compared with particle-based NRVs and with mass-based values that have also been proposed for workers protection. It is concluded that NRVs can be used for risk management for handling or processing of nanomaterials at workplaces provided that the scope of NRVs is not limited to ENPs only, but extended to the exposure to process-generated NPs as well.

Desiccation tolerance in Anopheles coluzzii: the effects of spiracle size and cuticular hydrocarbons

Science.gov (United States)

Arcaz, Arthur C.; Huestis, Diana L.; Dao, Adama; Yaro, Alpha S.; Diallo, Moussa; Andersen, John; Blomquist, Gary J.; Lehmann, Tovi

2016-01-01

ABSTRACT The African malaria mosquitoes Anopheles gambiae and Anopheles coluzzii range over forests and arid areas, where they withstand dry spells and months-long dry seasons, suggesting variation in their desiccation tolerance. We subjected a laboratory colony (G3) and wild Sahelian mosquitoes during the rainy and dry seasons to desiccation assays. The thoracic spiracles and amount and composition of cuticular hydrocarbons (CHCs) of individual mosquitoes were measured to determine the effects of these traits on desiccation tolerance. The relative humidity of the assay, body water available, rate of water loss and water content at death accounted for 88% of the variation in desiccation tolerance. Spiracle size did not affect the rate of water loss or desiccation tolerance of the colony mosquitoes, as was the case for the total CHCs. However, six CHCs accounted for 71% of the variation in desiccation tolerance and three accounted for 72% of the variation in the rate of water loss. Wild A. coluzzii exhibited elevated desiccation tolerance during the dry season. During that time, relative thorax and spiracle sizes were smaller than during the rainy season. A smaller spiracle size appeared to increase A. coluzzii's desiccation tolerance, but was not statistically significant. Seasonal changes in CHC composition were detected in Sahelian A. coluzzii. Stepwise regression models suggested the effect of particular CHCs on desiccation tolerance. In conclusion, the combination of particular CHCs along with the total amount of CHCs is a primary mechanism conferring desiccation tolerance in A. coluzzii, while variation in spiracle size might be a secondary mechanism. PMID:27207644

Allograft tolerance in pigs after fractionated lymphoid irradiation. II. Kidney graft after conventional total lymphoid irradiation and bone marrow cell grafting

International Nuclear Information System (INIS)

Fradelizi, D.; Mahouy, G.; de Riberolles, C.; Lecompte, Y.; Alhomme, P.; Douard, M.C.; Chotin, G.; Martelli, H.; Daburon, F.; Vaiman, M.

1981-01-01

Experiments with pigs have been performed in order to establish bone marrow chimerism and kidney graft tolerance between SLA genotyped semi-incompatible animals. Recipients were conditioned by means of conventional fractionated total lymphoid irradiation (TLI) delivered by a vertical cobalt source. The principal lymphoid regions of the pig, including thymus and spleen, were submitted to irradiation. Two protocols were tested: A = 250 cGy four times a week x 13 times (TLI) (two animals) and B = 350 cGy three times a week x 8 times (TLI) (four animals). Bone marrow cells were injected 24 h after the last irradiation. One day later, bilateral nephrectomy and the graft of one kidney from the bone marrow cell donor were performed simultaneously. Results convinced us that application of the TLI protocol to humans is not yet practicable and that further experimental work is needed

Documentation to the NCES Common Core of Data Local Education Agency Universe Survey: School Year 2011-12. Provisional Version 1a. NCES 2014-035

Science.gov (United States)

Keaton, Patrick

2014-01-01

This documentation is for the provisional version 1a file of the National Center for Education Statistics' (NCES) Common Core of Data (CCD) Local Education Agency (LEA) Universe Survey for SY 2011-12. It contains a brief description of the data collection, along with information required to understand and access the data file. The CCD is a…

Tolerance

DEFF Research Database (Denmark)

Tønder, Lars

Tolerance: A Sensorial Orientation to Politics is an experiment in re-orientation. The book is based on the wager that tolerance exceeds the more prevalent images of self-restraint and repressive benevolence because neither precludes the possibility of a more “active tolerance” motivated by the d...... these alternatives by returning to the notion of tolerance as the endurance of pain, linking this notion to exemplars and theories relevant to the politics of multiculturalism, religious freedom, and free speech....

Dietary exposure of Hong Kong secondary school students to total mercury and methylmercury from fish intake.

Science.gov (United States)

Tang, Anna Shiu Ping; Kwong, Ka Ping; Chung, Stephen Wai Cheung; Ho, Yuk Yin; Xiao, Ying

2009-01-01

Fish is the main source of dietary exposure to methylmercury (MeHg), which is a public health concern owing to its potential neurotoxicity. To evaluate the public health risk, this study estimated the total mercury (tHg) and MeHg exposure from fish intake in Hong Kong secondary school students. Median tHg and MeHg concentrations of 280 samples purchased from different commercial outlets (covering 89 species of whole fish and three types of canned tuna), together with the local food consumption data of secondary school students obtained by semi-quantitative food frequency questionnaire in 2000, were used to estimate dietary exposure from fish intake for the average and high consumer (95th percentile exposure). For tHg, the median concentration was 63 µg kg(-1) (range 3-1370 µg kg(-1)) and estimated exposures ranged 0.5-0.6 µg kg(-1) body weight (bw) week(-1) for an average consumer and 1.6-1.9 µg kg(-1) bw week(-1) for a high consumer. For MeHg, median concentration was 48 µg kg(-1) (range 3-1010 µg kg(-1)) and estimated dietary exposures were 0.4-0.5 µg kg(-1) bw week(-1) for an average consumer and 1.2-1.4 µg kg(-1) bw week(-1) for a high consumer. These values are below the respective provisional tolerable weekly intake (PTWI) established by the Joint Food and Agriculture Organization/World Health Organization Expert Committee on Food Additives (JECFA). The health risk is greater for high consumers since MeHg exposures may approach or exceed the PTWI when other dietary sources are taken into account.

Physiologically-based pharmacokinetic model for Fentanyl in support of the development of Provisional Advisory Levels

Energy Technology Data Exchange (ETDEWEB)

Shankaran, Harish, E-mail: harish.shankaran@pnnl.gov [Computational Biology and Bioinformatics Group, Pacific Northwest National Laboratory, Richland, WA 99352 (United States); Adeshina, Femi [National Homeland Security Research Center, United States Environmental Protection Agency, Washington, DC 20460 (United States); Teeguarden, Justin G. [Systems Toxicology Group, Pacific Northwest National Laboratory, Richland, WA 99352 (United States)

2013-12-15

Provisional Advisory Levels (PALs) are tiered exposure limits for toxic chemicals in air and drinking water that are developed to assist in emergency responses. Physiologically-based pharmacokinetic (PBPK) modeling can support this process by enabling extrapolations across doses, and exposure routes, thereby addressing gaps in the available toxicity data. Here, we describe the development of a PBPK model for Fentanyl – a synthetic opioid used clinically for pain management – to support the establishment of PALs. Starting from an existing model for intravenous Fentanyl, we first optimized distribution and clearance parameters using several additional IV datasets. We then calibrated the model using pharmacokinetic data for various formulations, and determined the absorbed fraction, F, and time taken for the absorbed amount to reach 90% of its final value, t90. For aerosolized pulmonary Fentanyl, F = 1 and t90 < 1 min indicating complete and rapid absorption. The F value ranged from 0.35 to 0.74 for oral and various transmucosal routes. Oral Fentanyl was absorbed the slowest (t90 ∼ 300 min); the absorption of intranasal Fentanyl was relatively rapid (t90 ∼ 20–40 min); and the various oral transmucosal routes had intermediate absorption rates (t90 ∼ 160–300 min). Based on these results, for inhalation exposures, we assumed that all of the Fentanyl inhaled from the air during each breath directly, and instantaneously enters the arterial circulation. We present model predictions of Fentanyl blood concentrations in oral and inhalation scenarios relevant for PAL development, and provide an analytical expression that can be used to extrapolate between oral and inhalation routes for the derivation of PALs. - Highlights: • We develop a Fentanyl PBPK model for relating external dose to internal levels. • We calibrate the model to oral and inhalation exposures using > 50 human datasets. • Model predictions are in good agreement with the available

Tipología de las bibliotecas argentinas desde el período hispánico hasta 1830: Una primera clasificación provisional Typology of the Argentine Libraries since the Hispanic Period to 1830: A First Provisional Classification

Directory of Open Access Journals (Sweden)

Alejandro E. Parada

2003-12-01

Full Text Available El presente artículo intenta trazar una breve clasificación de los distintos «tipos» de bibliotecas existentes en el actual territorio argentino durante la dominación hispánica hasta el año 1830. La tipología adoptada es, ante todo, una aproximación provisional y ampliamente perfectible. La contribución se dirige, en líneas generales, a quienes se inician en el estudio de la «Historia del libro, de las bibliotecas y de la lectura» en la Argentina. En este sentido, la bibliografía citada intenta suplir la falta de guías de estudio sobre esta temática. Las bibliotecas identificadas son las siguientes: de instituciones o corporaciones religiosas, particulares, pública catedralicia, pública conventual, pública, de sociedades de extranjeros (societarias, de institutos de enseñanza, circulantes (y gabinetes de lectura, y por encargo u ofrecidas por negociantes.This article tries to outline a brief classification of the different types of existing libraries in the present Argentine territory since the Hispanic domination to 1830. The typology adopted is, above all, a provisional approach greatly rectifiable. The contribution is aimed, in general terms, to whom start the study of the history of the books, libraries, and reading in Argentina. In that sense, the quoted bibliography tries to substitute the lack of study guides on the subject. The identified libraries belong to: institutions or religious corporations; private individuals; foreigners societies (i.e.: belonging to a society; educational institutes; and cathedral public libraries; conventual public libraries; public libraries; circulating libraries (and reading rooms; and libraries made to order or offered by businessmen.

Evolution of resistance and tolerance to herbivores: testing the trade-off hypothesis

Directory of Open Access Journals (Sweden)

Eunice Kariñho-Betancourt

2015-03-01

Full Text Available Background. To cope with their natural enemies, plants rely on resistance and tolerance as defensive strategies. Evolution of these strategies among natural population can be constrained by the absence of genetic variation or because of the antagonistic genetic correlation (trade-off between them. Also, since plant defenses are integrated by several traits, it has been suggested that trade-offs might occur between specific defense traits.Methodology/Principal Findings. We experimentally assessed (1 the presence of genetic variance in tolerance, total resistance, and leaf trichome density as specific defense trait, (2 the extent of natural selection acting on plant defenses, and (3 the relationship between total resistance and leaf trichome density with tolerance to herbivory in the annual herb Datura stramonium. Full-sib families of D. stramonium were either exposed to natural herbivores (control or protected from them by a systemic insecticide. We detected genetic variance for leaf trichome density, and directional selection acting on this character. However, we did not detect a negative significant correlation between tolerance and total resistance, or between tolerance and leaf trichome density. We argue that low levels of leaf damage by herbivores precluded the detection of a negative genetic correlation between plant defense strategies.Conclusions/Significance. This study provides empirical evidence of the independent evolution of plant defense strategies, and a defensive role of leaf trichomes. The pattern of selection should favor individuals with high trichomes density. Also, because leaf trichome density reduces damage by herbivores and possess genetic variance in the studied population, its evolution is not constrained.

Documentation to the NCES Common Core of Data Public Elementary/Secondary School Universe Survey: School Year 2011-12. Provisional Version 1a. NCES 2014-100

Science.gov (United States)

Keaton, Patrick

2013-01-01

The documentation for this provisional version 1a file of the National Center for Education Statistics' (NCES) Common Core of Data (CCD) Public Elementary/Secondary School Universe Survey for SY 2011-12, contains a brief description of the data collection, along with information required to understand and access the data file. The SY 2011-12…

Crafting tolerance

DEFF Research Database (Denmark)

Kirchner, Antje; Freitag, Markus; Rapp, Carolin

2011-01-01

Ongoing changes in social structures, orientation, and value systems confront us with the growing necessity to address and understand transforming patterns of tolerance as well as specific aspects, such as social tolerance. Based on hierarchical analyses of the latest World Values Survey (2005......–08) and national statistics for 28 countries, we assess both individual and contextual aspects that influence an individual's perception of different social groupings. Using a social tolerance index that captures personal attitudes toward these groupings, we present an institutional theory of social tolerance. Our...

Young novice drivers and the risky behaviours of parents and friends during the provisional (intermediate) licence phase: a brief report.

Science.gov (United States)

Scott-Parker, Bridie; Watson, Barry; King, Mark J; Hyde, Melissa K

2014-08-01

While there is research indicating that many factors influence the young novice driver's increased risk of road crash injury during the earliest stages of their independent driving, there is a need to further understand the relationship between the perceived risky driving behaviour of parents and friends and the risky behaviour of drivers with a Provisional (intermediate) licence. As part of a larger research project, 378 drivers aged 17-25 years (M=18.22, SD=1.59, 113 males) with a Provisional licence completed an online survey exploring the perceived riskiness of their parents' and friends' driving, and the extent to which they pattern (i.e. base) their driving behaviour on the driving of their parents and friends. Young drivers who reported patterning their driving on their friends, and who reported they perceived their friends to be risky drivers, reported more risky driving. The risky driving behaviour of young male drivers was associated with the perceived riskiness of their fathers' driving, whilst for female drivers the perceived riskiness of their mothers' driving approached significance. The development and application of countermeasures targeting the risky behaviour of same-sex parents appears warranted by the robust research findings. In addition, countermeasures need to encourage young people in general to be non-risky drivers; targeting the negative influence of risky peer groups specifically. Social norms interventions may minimise the influence of potentially-overestimated riskiness. Copyright © 2013 Elsevier Ltd. All rights reserved.

The Paediatric Rheumatology International Trials Organisation provisional criteria for the evaluation of response to therapy in juvenile dermatomyositis.

Science.gov (United States)

Ruperto, Nicolino; Pistorio, Angela; Ravelli, Angelo; Rider, Lisa G; Pilkington, Clarissa; Oliveira, Sheila; Wulffraat, Nico; Espada, Graciela; Garay, Stella; Cuttica, Ruben; Hofer, Michael; Quartier, Pierre; Melo-Gomes, Jose; Reed, Ann M; Wierzbowska, Malgorzata; Feldman, Brian M; Harjacek, Miroslav; Huppertz, Hans-Iko; Nielsen, Susan; Flato, Berit; Lahdenne, Pekka; Michels, Harmut; Murray, Kevin J; Punaro, Lynn; Rennebohm, Robert; Russo, Ricardo; Balogh, Zsolt; Rooney, Madeleine; Pachman, Lauren M; Wallace, Carol; Hashkes, Philip; Lovell, Daniel J; Giannini, Edward H; Gare, Boel Andersson; Martini, Alberto

2010-11-01

To develop a provisional definition for the evaluation of response to therapy in juvenile dermatomyositis (DM) based on the Paediatric Rheumatology International Trials Organisation juvenile DM core set of variables. Thirty-seven experienced pediatric rheumatologists from 27 countries achieved consensus on 128 difficult patient profiles as clinically improved or not improved using a stepwise approach (patient's rating, statistical analysis, definition selection). Using the physicians' consensus ratings as the "gold standard measure," chi-square, sensitivity, specificity, false-positive and-negative rates, area under the receiver operating characteristic curve, and kappa agreement for candidate definitions of improvement were calculated. Definitions with kappa values >0.8 were multiplied by the face validity score to select the top definitions. The top definition of improvement was at least 20% improvement from baseline in 3 of 6 core set variables with no more than 1 of the remaining worsening by more than 30%, which cannot be muscle strength. The second-highest scoring definition was at least 20% improvement from baseline in 3 of 6 core set variables with no more than 2 of the remaining worsening by more than 25%, which cannot be muscle strength (definition P1 selected by the International Myositis Assessment and Clinical Studies group). The third is similar to the second with the maximum amount of worsening set to 30%. This indicates convergent validity of the process. We propose a provisional data-driven definition of improvement that reflects well the consensus rating of experienced clinicians, which incorporates clinically meaningful change in core set variables in a composite end point for the evaluation of global response to therapy in juvenile DM. Copyright © 2010 by the American College of Rheumatology.

Implant-Supported PMMA Monolithic Full-Arch Rehabilitation with Surgical Computer-Planned Guide and Immediate Provisional: A Case Report with One Year Follow-Up

Directory of Open Access Journals (Sweden)

Vincenzo Luca Zizzari

2018-01-01

Full Text Available The aim of this case report is to describe the surgical and prosthetic procedures to achieve maxillary and mandibular implant-supported PMMA monolithic full-arch rehabilitation (PMFR with surgical computer-planned guide and immediate provisional. In such cases, the correct planning of dental implants’ position, length, and diameter and the prosthetic phases via computer-aided design are very important to achieve good aesthetic and functional long-lasting results.

Implant-Supported PMMA Monolithic Full-Arch Rehabilitation with Surgical Computer-Planned Guide and Immediate Provisional: A Case Report with One Year Follow-Up

OpenAIRE

Zizzari, Vincenzo Luca; Tacconelli, Gianmarco

2018-01-01

The aim of this case report is to describe the surgical and prosthetic procedures to achieve maxillary and mandibular implant-supported PMMA monolithic full-arch rehabilitation (PMFR) with surgical computer-planned guide and immediate provisional. In such cases, the correct planning of dental implants’ position, length, and diameter and the prosthetic phases via computer-aided design are very important to achieve good aesthetic and functional long-lasting results.

The Agency's Safeguards System (1965, as provisionally extended in 1966 and 1968); Sistema de Salvaguardias del Organismo (1965, ampliado provisionalmente en 1966 y 1968)

Energy Technology Data Exchange (ETDEWEB)

NONE

1968-09-24

The Agency's safeguards system, as approved by the Board of Governors in 1965, and provisionally extended in 1966, is set forth in this document for the Information of all Members [Spanish] En el presente documento se reproduce, para informacion de todos los Estados Miembros, el Sistema de salvaguardias del Organismo aprobado por la Junta de Gobernadores en 1965 y ampliado provisionalmente en 1966 y 1968.

Fault tolerant digital control systems for boiling water reactors

International Nuclear Information System (INIS)

Chakraborty, S.; Cash, N.R.

1986-01-01

In a Boiling Water Reactor nuclear power plant, the power generation control function is divided into several systems, each system controlling only a part of the total plant. Presently, each system is controlled by conventional analog or digital logic circuits with little interaction for coordinated control. The advent of microprocessors has allowed the development of distributed fault-tolerant digital controls. The objective is to replace these conventional controls with fault-tolerant digital controls connected together with digital communication links to form a fully integrated nuclear power plant control system

Compromise and Toleration

DEFF Research Database (Denmark)

Rostbøll, Christian F.

Political compromise is akin to toleration, since both consist of an "agreement to disagree." Compromise and toleration also share a predicament of being regarded as ambiguous virtues that require of us to accept something we actually regard as wrong. However, we misunderstand the nature, justifi...... in compromise are more stringent than those for being tolerated. Still, the limits of compromise cannot be drawn to narrowly if it is to remain its value as a form of agreement that respects and embodies the differences of opinion in society.......Political compromise is akin to toleration, since both consist of an "agreement to disagree." Compromise and toleration also share a predicament of being regarded as ambiguous virtues that require of us to accept something we actually regard as wrong. However, we misunderstand the nature......, justification, and limits of compromise if we see it merely as a matter of toleration. While toleration is mainly a matter of accepting citizens' equal right to co-existence as subjects to law, political compromise includes the parties in making law – it makes them co-authors of law. Toleration entails...

Role of donor lymphoid cells in the transfer of allograft tolerance

International Nuclear Information System (INIS)

Pierce, G.E.; Watts, L.M.

1985-01-01

Tolerance to murine skin allografts across a MHC disparity was induced by conditioning primary hosts with sublethal fractionated total-body irradiation (FTBI) and transfusion of allogeneic bone marrow (BM). Tolerance could be adoptively transferred to secondary hosts conditioned by FTBI with infusion of spleen cells from hosts bearing intact skin allografts greater than 60 days. Tolerance could not be transferred by tolerant host spleen (THS) preparations from which cells of the donor genotype had been deleted by cytotoxic alloantisera. Deletion of host genotype cells, however, did not diminish the capability of THS to transfer tolerance. All of the tolerizing activity of THS appeared to reside within cells of the donor genotype. Small numbers of normal donor spleen cells could induce tolerance in FTBI hosts but only at the expense of very high mortality, in contrast to the low mortality observed with tolerizing injections of allogeneic donor cells from THS or injections of normal semiallogeneic F1 hybrid spleen cells. If an active immune response is responsible for tolerance induction/transfer in this model, allogeneic donor lymphoid cells derived from BM, in contrast to donor spleen cells, must be capable of mounting this response without concomitant severe GVHD. In future experiments, cells of donor genotype can be isolated from THS and purified in sufficient numbers to compare their tolerizing efficiency vs. that of normal donor cells, detect possible suppression of normal host cell alloreactivity in vitro and identify the donor cell phenotypes involved

Recognition and Toleration

DEFF Research Database (Denmark)

Lægaard, Sune

2010-01-01

Recognition and toleration are ways of relating to the diversity characteristic of multicultural societies. The article concerns the possible meanings of toleration and recognition, and the conflict that is often claimed to exist between these two approaches to diversity. Different forms...... or interpretations of recognition and toleration are considered, confusing and problematic uses of the terms are noted, and the compatibility of toleration and recognition is discussed. The article argues that there is a range of legitimate and importantly different conceptions of both toleration and recognition...

Evaluation of bond strength between grooved titanium alloy implant abutments and provisional veneering materials after surface treatment of the abutments: An in vitro study

Directory of Open Access Journals (Sweden)

Gowtham Venkat

2017-01-01

Full Text Available Introduction: Titanium has become the material of choice with greater applications in dental implants. The success of the dental implant does not only depend on the integration of the implant to the bone but also on the function and longevity of the superstructure. The clinical condition that demands long-term interim prosthesis is challenging owing to the decreased bond between the abutment and the veneering material. Hence, various surface treatments are done on the abutments to increase the bond strength. Aim: This study aimed to evaluate the bond strength between the abutment and the provisional veneering materials by surface treatments such as acid etching, laser etching, and sand blasting of the abutment. Materials and Methods: Forty titanium alloy abutments of 3 mm diameter and 11 mm height were grouped into four groups with ten samples. Groups A, B, C, and D are untreated abutments, sand blasted with 110 μm aluminum particles, etched with 1% hydrofluoric acid and 30% nitric acid, and laser etched with Nd: YAG laser, respectively. Provisional crowns were fabricated with bis-acrylic resin and cemented with noneugenol temporary luting cement. The shear bond strength was measured in universal testing machine using modified Shell–Nielsen shear test after the cemented samples were stored in water at 25°C for 24 h. Load was applied at a constant cross head speed of 5 mm/min until a sudden decrease in resistance indicative of bond failure was observed. The corresponding force values were recorded, and statistical analysis was done using one-way ANOVA and Newman–Keuls post hoc test. Results: The laser-etched samples showed higher bond strength. Conclusion: Among the three surface treatments, laser etching showed the highest bond strength between titanium alloy implant abutment and provisional restorations. The sand-blasted surfaces demonstrated a significant difference in bond strength compared to laser-etched surfaces. The results of this

Evaluation of Bond Strength between Grooved Titanium Alloy Implant Abutments and Provisional Veneering Materials after Surface Treatment of the Abutments: An In vitro Study.

Science.gov (United States)

Venkat, Gowtham; Krishnan, Murugesan; Srinivasan, Suganya; Balasubramanian, Muthukumar

2017-01-01

Titanium has become the material of choice with greater applications in dental implants. The success of the dental implant does not only depend on the integration of the implant to the bone but also on the function and longevity of the superstructure. The clinical condition that demands long-term interim prosthesis is challenging owing to the decreased bond between the abutment and the veneering material. Hence, various surface treatments are done on the abutments to increase the bond strength. This study aimed to evaluate the bond strength between the abutment and the provisional veneering materials by surface treatments such as acid etching, laser etching, and sand blasting of the abutment. Forty titanium alloy abutments of 3 mm diameter and 11 mm height were grouped into four groups with ten samples. Groups A, B, C, and D are untreated abutments, sand blasted with 110 μm aluminum particles, etched with 1% hydrofluoric acid and 30% nitric acid, and laser etched with Nd: YAG laser, respectively. Provisional crowns were fabricated with bis-acrylic resin and cemented with noneugenol temporary luting cement. The shear bond strength was measured in universal testing machine using modified Shell-Nielsen shear test after the cemented samples were stored in water at 25°C for 24 h. Load was applied at a constant cross head speed of 5 mm/min until a sudden decrease in resistance indicative of bond failure was observed. The corresponding force values were recorded, and statistical analysis was done using one-way ANOVA and Newman-Keuls post hoc test. The laser-etched samples showed higher bond strength. Among the three surface treatments, laser etching showed the highest bond strength between titanium alloy implant abutment and provisional restorations. The sand-blasted surfaces demonstrated a significant difference in bond strength compared to laser-etched surfaces. The results of this study confirmed that a combination of surface treatments and bond agents enhances the

Provisional English Translation by the IAEA of Notification Faxes Sent by the Fukushima Daiichi NPP Site Superintendent to Off-Site Officials on 11 March 2011. Annex I of Technical Volume 3

International Nuclear Information System (INIS)

2015-01-01

This annex contains a provisional English translation of the faxes sent by the Fukushima Daiichi NPP Site Superintendent to METI, the Governor of Fukushima Prefecture and the Mayors of Okuma and Futaba on 11 March 2011

Teaching Tolerance? Associational Diversity and Tolerance Formation

DEFF Research Database (Denmark)

Rapp, Carolin; Freitag, Markus

2015-01-01

, a closer look is taken at how associational diversity relates to the formation of tolerance and the importance of associations as schools of tolerance are evaluated. The main theoretical argument follows contact theory, wherein regular and enduring contact in diverse settings reduces prejudice and thereby...

Mechanical tolerance stackup and analysis

CERN Document Server

Fischer, Bryan R

2004-01-01

BackgroundDimensioning and TolerancingTolerance Format and Decimal PlacesConverting Plus/Minus Dimensions and Tolerances into Equal Bilaterally Toleranced DimensionsVariation and Sources of VariationTolerance AnalysisWorst-case Tolerance StackupsStatistical Tolerance StackupsGeometric Dimensioning and Tolerancing (GD&T)Converting Plus/Minus Tolerancing to Positional Tolerancing and Projected Tolerance ZonesDiametral and Radial Tolerance StackupsSpecifying Material Condition Modifiers and Their Effect on Tolerance Stackups The Tolerance Stackup SketchThe Tolerance Stackup Report FormTolerance S

An Assessment of Three Northeast Asian Economies’ Total Factor Productivity

Directory of Open Access Journals (Sweden)

Dana GÂRDU

2011-07-01

Full Text Available East Asian economies have achieved spectacular growth rates in a relatively short timespan outstripping the rest of the developing world. Hence the concern of both scholarly and policymaking circles for their peculiar development strategies. Both their spectacular rise and provisional decline after the Asian financial crisis (AFC were explained from three major perspectives: statism, neoliberalism, and neoconfucianism.The paper purports to quantify and interpret the pre-crisis total factor productivity (TFP of three Northeast Asian economies by using the Solow Model. The interdependencies between their TFP dynamics were investigated via a VAR Model. The findings suggest that labour contribution has decreased over time in favour of capital inputs and/or TFP as speedy industrialisation, and a gradual refinement of international specialisation proceeded. However low or even negative TFP during the 1990s signal the emergence of structural problems that decelerate growth, and increase these economies’ vulnerability to exogenous shocks.

SSR-based association mapping of salt tolerance in cotton (Gossypium hirsutum L.).

Science.gov (United States)

Zhao, Y L; Wang, H M; Shao, B X; Chen, W; Guo, Z J; Gong, H Y; Sang, X H; Wang, J J; Ye, W W

2016-05-25

The identification of simple sequence repeat (SSR) markers associated with salt tolerance in cotton contributes to molecular assisted selection (MAS), which can improve the efficiency of traditional breeding. In this study, 134 samples of upland cotton cultivars were selected. The seedling emergence rates were tested under 0.3% NaCl stress. A total of 74 SSR markers were used to scan the genomes of these samples. To identify SSR markers associated with salt tolerance, an association analysis was performed between salt tolerance and SSR markers using TASSEL 2.1, based on the analysis of genetic structure using Structure 2.3.4. The results showed that the seedling emergence rates of 134 cultivars were significantly different, and 27 salt-sensitive and 10 salt-tolerant cultivars were identified. A total of 148 loci were found in 74 SSR markers involving 246 allelic variations, which ranged from 2 to 7 with an average of 3.32 per SSR marker. The gene diversity ranged from 0.0295 to 0.4959, with the average being 0.2897. The polymorphic information content ranged from0.0290 to 0.3729, with the average being 0.2381. This natural population was classified into two subgroups by Structure 2.3.4, containing 89 and 45 samples, respectively. Finally, eight SSR sites associated with salt tolerance ware found through an association analysis, with the rate of explanation ranging from 2.91 to 7.82% and an average of 4.32%. These results provide reference data for the use MAS for salt tolerance in cotton.

Quantifying tolerance indicator values for common stream fish species of the United States

Science.gov (United States)

Meador, M.R.; Carlisle, D.M.

2007-01-01

The classification of fish species tolerance to environmental disturbance is often used as a means to assess ecosystem conditions. Its use, however, may be problematic because the approach to tolerance classification is based on subjective judgment. We analyzed fish and physicochemical data from 773 stream sites collected as part of the U.S. Geological Survey's National Water-Quality Assessment Program to calculate tolerance indicator values for 10 physicochemical variables using weighted averaging. Tolerance indicator values (TIVs) for ammonia, chloride, dissolved oxygen, nitrite plus nitrate, pH, phosphorus, specific conductance, sulfate, suspended sediment, and water temperature were calculated for 105 common fish species of the United States. Tolerance indicator values for specific conductance and sulfate were correlated (rho = 0.87), and thus, fish species may be co-tolerant to these water-quality variables. We integrated TIVs for each species into an overall tolerance classification for comparisons with judgment-based tolerance classifications. Principal components analysis indicated that the distinction between tolerant and intolerant classifications was determined largely by tolerance to suspended sediment, specific conductance, chloride, and total phosphorus. Factors such as water temperature, dissolved oxygen, and pH may not be as important in distinguishing between tolerant and intolerant classifications, but may help to segregate species classified as moderate. Empirically derived tolerance classifications were 58.8% in agreement with judgment-derived tolerance classifications. Canonical discriminant analysis revealed that few TIVs, primarily chloride, could discriminate among judgment-derived tolerance classifications of tolerant, moderate, and intolerant. To our knowledge, this is the first empirically based understanding of fish species tolerance for stream fishes in the United States.

Tolerance to and cross tolerance between ethanol and nicotine.

Science.gov (United States)

Collins, A C; Burch, J B; de Fiebre, C M; Marks, M J

1988-02-01

Female DBA mice were subjected to one of four treatments: ethanol-containing or control diets, nicotine (0.2, 1.0, 5.0 mg/kg/hr) infusion or saline infusion. After removal from the liquid diets or cessation of infusion, the animals were challenged with an acute dose of ethanol or nicotine. Chronic ethanol-fed mice were tolerant to the effects of ethanol on body temperature and open field activity and were cross tolerant to the effects of nicotine on body temperature and heart rate. Nicotine infused animals were tolerant to the effects of nicotine on body temperature and rotarod performance and were cross tolerant to the effects of ethanol on body temperature. Ethanol-induced sleep time was decreased in chronic ethanol- but not chronic nicotine-treated mice. Chronic drug treatment did not alter the elimination rate of either drug. Chronic ethanol treatment did not alter the number or affinity of brain nicotinic receptors whereas chronic nicotine treatment elicited an increase in the number of [3H]-nicotine binding sites. Tolerance and cross tolerance between ethanol and nicotine is discussed in terms of potential effects on desensitization of brain nicotinic receptors.

Tolerance of radiotherapy combined with adjuvant chemotherapy in breast cancer

International Nuclear Information System (INIS)

Hrafnkelsson, J.; Nilsson, K.; Soederberg, M.

1987-01-01

Forty-three postmenopausal breast cancer patients with axillary lymph node metastasis were randomized to receive postoperative radiotherapy (45 Gy) or the combination of radiotherapy and 6 months of chemotherapy. Forty-three premenopausal patients had postoperative radiotherapy and were randomized to receive one of two different chemotherapy combinations. Pulmonary fibrosis was roentgenologically registered in approximately 70% of the total patient population six months after initiation of therapy. Addition of chemotherapy with doxorubicin and cyclophosphamide significantly increased the proportion of patients with pulmonary fibrosis compared with patients treated with radiotherapy only or radiotherapy combined with cyclophosphamide, methotrexate and 5-fluorouracil. Premenopausal patients tolerated the combination of radiotherapy and chemotherapy better than postmenopausal patients of whom approximately 30% did not tolerate 65% or more of prescribed total dose of chemotherapy. (orig.)

Mechanism-based population modelling for assessment of L-cell function based on total GLP-1 response following an oral glucose tolerance test

DEFF Research Database (Denmark)

Møller, Jonas B.; Jusko, William J.; Gao, Wei

2011-01-01

was to build a mechanism-based population model that describes the time course of total GLP-1 and provides indices for capability of secretion in each subject. The goal was thus to model the secretion of GLP-1, and not its effect on insulin production. Single 75 g doses of glucose were administered orally......GLP-1 is an insulinotropic hormone that synergistically with glucose gives rise to an increased insulin response. Its secretion is increased following a meal and it is thus of interest to describe the secretion of this hormone following an oral glucose tolerance test (OGTT). The aim of this study....... The individual estimates of absorption rate constants were used in the model for GLP-1 secretion. Estimation of parameters was performed using the FOCE method with interaction implemented in NONMEM VI. The final transit/indirect-response model obtained for GLP-1 production following an OGTT included two...

The Total Deviation Index estimated by Tolerance Intervals to evaluate the concordance of measurement devices

Directory of Open Access Journals (Sweden)

Ascaso Carlos

2010-04-01

Full Text Available Abstract Background In an agreement assay, it is of interest to evaluate the degree of agreement between the different methods (devices, instruments or observers used to measure the same characteristic. We propose in this study a technical simplification for inference about the total deviation index (TDI estimate to assess agreement between two devices of normally-distributed measurements and describe its utility to evaluate inter- and intra-rater agreement if more than one reading per subject is available for each device. Methods We propose to estimate the TDI by constructing a probability interval of the difference in paired measurements between devices, and thereafter, we derive a tolerance interval (TI procedure as a natural way to make inferences about probability limit estimates. We also describe how the proposed method can be used to compute bounds of the coverage probability. Results The approach is illustrated in a real case example where the agreement between two instruments, a handle mercury sphygmomanometer device and an OMRON 711 automatic device, is assessed in a sample of 384 subjects where measures of systolic blood pressure were taken twice by each device. A simulation study procedure is implemented to evaluate and compare the accuracy of the approach to two already established methods, showing that the TI approximation produces accurate empirical confidence levels which are reasonably close to the nominal confidence level. Conclusions The method proposed is straightforward since the TDI estimate is derived directly from a probability interval of a normally-distributed variable in its original scale, without further transformations. Thereafter, a natural way of making inferences about this estimate is to derive the appropriate TI. Constructions of TI based on normal populations are implemented in most standard statistical packages, thus making it simpler for any practitioner to implement our proposal to assess agreement.

An investigation the effects of geometric tolerances on the natural frequencies of rotating shafts

Directory of Open Access Journals (Sweden)

Ali Akbar Ansarifard

2015-04-01

Full Text Available This paper presents the effects of geometric tolerances on the rotating shafts natural frequencies. Due to modeling the tolerances, a code is written in MATLAB 2013 software that produces deviated points. Deviated points are controlled by different geometric tolerances, including cylindricity, total run-out and coaxiality tolerances. Final surfaces and models passing through the points are created using SolidWorks 2013 software and finally modal analysis is carried out with the FE software. It is observed whatever the natural frequency is higher or the geometric tolerances are greater, the real and ideal shafts natural frequencies are more distant. Also difference percentage between ideal and real frequencies is investigated. The results show that the percentage value is approximately constant for every mode shapes.

Incisor reduction: a provisional aesthetic technique for traumatised teeth.

LENUS (Irish Health Repository)

Darby, L J

2010-12-11

Patients in the mixed dentition who have suffered severe extrusion or avulsion injuries often present with difficult treatment decisions, especially when the initial emergency care has been compromised. Here we describe a well-tolerated, aesthetically acceptable and conservative method for treating such patients until a definitive treatment plan is possible.

An analysis of tolerance levels in IMRT quality assurance procedures

International Nuclear Information System (INIS)

Basran, Parminder S.; Woo, Milton K.

2008-01-01

Increased use of intensity modulated radiation therapy (IMRT) has resulted in increased efforts in patient quality assurance (QA). Software and detector systems intended to streamline the IMRT quality assurance process often report metrics, such as percent discrepancies between measured and computed doses, which can be compared to benchmark or threshold values. The purpose of this work is to examine the relationships between two different types of IMRT QA processes in order to define, or refine, appropriate tolerances values. For 115 IMRT plans delivered in a 3 month period, we examine the discrepancies between (a) the treatment planning system (TPS) and results from a commercial independent monitor unit (MU) calculation program; (b) TPS and results from a commercial diode-array measurement system; and (c) the independent MU calculation and the diode-array measurements. Statistical tests were performed to assess significance in the IMRT QA results for different disease site and machine models. There is no evidence that the average total dose discrepancy in the monitor unit calculation depends on the disease site. Second, the discrepancies in the two IMRT QA methods are independent: there is no evidence that a better --or worse--monitor unit validation result is related to a better--or worse--diode-array measurement result. Third, there is marginal benefit in repeating the independent MU calculation with a more suitable dose point, if the initial IMRT QA failed a certain tolerance. Based on these findings, the authors conclude at some acceptable tolerances based on disease site and IMRT QA method. Specifically, monitor unit validations are expected to have a total dose discrepancy of 3% overall, and 5% per beam, independent of disease site. Diode array measurements are expected to have a total absolute dose discrepancy of 3% overall, and 3% per beam, independent of disease site. The percent of pixels exceeding a 3% and 3 mm threshold in a gamma analysis should be

Pre-occupation of innocence and provisional penal enforcement: a critical analysis of the Federal Supreme Court jurisprudential modification

Directory of Open Access Journals (Sweden)

Augusto Jobim do Amaral

2017-10-01

Full Text Available This article deals with the problems involved in the provisional execution of the sentence in the Brazilian criminal procedural system, especially with respect to the constitutional guarantee of the presumption of innocence, here in its political-constitutional value. In the current national context in which it is heavily invested in relativizations of fundamental guarantees and in false punitive solutions, it is essential that the criminal procedure be imposed from the principles enshrined in the 1988 Constitution. It intends to demonstrate the new contours of the position built by the Federal Supreme Court on the subject, its possible criticisms and impacts on the commitment of the legitimacy of the decisions made in criminal matters by the Judiciary.

Bacterial lipoprotein-induced self-tolerance and cross-tolerance to LPS are associated with reduced IRAK-1 expression and MyD88-IRAK complex formation.

LENUS (Irish Health Repository)

Li, Chong Hui

2012-02-03

Tolerance to bacterial cell-wall components may represent an essential regulatory mechanism during bacterial infection. We have demonstrated previously that the inhibition of nuclear factor (NF)-kappaB and mitogen-activated protein kinase activation was present in bacterial lipoprotein (BLP) self-tolerance and its cross-tolerance to lipopolysaccharide (LPS). In this study, the effect of BLP-induced tolerance on the myeloid differentiation factor 88 (MyD88)-dependent upstream signaling pathway for NF-kappaB activation in vitro was examined further. When compared with nontolerant human monocytic THP-1 cells, BLP-tolerant cells had a significant reduction in tumor necrosis factor alpha (TNF-alpha) production in response to a high-dose BLP (86+\\/-12 vs. 6042+\\/-245 ng\\/ml, P < 0.01) or LPS (341+\\/-36 vs. 7882+\\/-318 ng\\/ml, P < 0.01) stimulation. The expression of Toll-like receptor 2 (TLR2) protein was down-regulated in BLP-tolerant cells, whereas no significant differences in TLR4, MyD88, interleukin-1 receptor-associated kinase 4 (IRAK-4), and TNF receptor-associated factor 6 expression were observed between nontolerant and BLP-tolerant cells, as confirmed by Western blot analysis. The IRAK-1 protein was reduced markedly in BLP-tolerant cells, although IRAK-1 mRNA expression remained unchanged as revealed by real-time reverse transcriptase-polymerase chain reaction analysis. Furthermore, decreased MyD88-IRAK immunocomplex formation, as demonstrated by immunoprecipitation, was observed in BLP-tolerant cells following a second BLP or LPS stimulation. BLP pretreatment also resulted in a marked inhibition in total and phosphorylated inhibitor of kappaB-alpha (IkappaB-alpha) expression, which was not up-regulated by subsequent BLP or LPS stimulation. These results demonstrate that in addition to the down-regulation of TLR2 expression, BLP tolerance is associated with a reduction in IRAK-1 expression, MyD88-IRAK association, and IkappaB-alpha phosphorylation. These

Identification of Quantitative Trait Loci (QTL) and Candidate Genes for Cadmium Tolerance in Populus

Energy Technology Data Exchange (ETDEWEB)

Induri, Brahma R [West Virginia University; Ellis, Danielle R [West Virginia University; Slavov, Gancho [West Virginia University; Yin, Tongming [ORNL; Muchero, Wellington [ORNL; Tuskan, Gerald A [ORNL; DiFazio, Stephen P [West Virginia University

2012-01-01

Knowledge of genetic variation in response of Populus to heavy metals like cadmium (Cd) is an important step in understanding the underlying mechanisms of tolerance. In this study, a pseudo-backcross pedigree of Populus trichocarpa and Populus deltoides was characterized for Cd exposure. The pedigree showed significant variation for Cd tolerance thus enabling the identification of relatively tolerant and susceptible genotypes for intensive characterization. A total of 16 QTLs at logarithm of odds (LOD) ratio > 2.5, were found to be associated with total dry weight, its components, and root volume. Four major QTLs for total dry weight were mapped to different linkage groups in control (LG III) and Cd conditions (LG XVI) and had opposite allelic effects on Cd tolerance, suggesting that these genomic regions were differentially controlled. The phenotypic variation explained by Cd QTL for all traits under study varied from 5.9% to 11.6% and averaged 8.2% across all QTL. Leaf Cd contents also showed significant variation suggesting the phytoextraction potential of Populus genotypes, though heritability of this trait was low (0.22). A whole-genome microarray study was conducted by using two genotypes with extreme responses for Cd tolerance in the above study and differentially expressed genes were identified. Candidate genes including CAD2 (CADMIUM SENSITIVE 2), HMA5 (HEAVY METAL ATPase5), ATGTST1 (Arabidopsis thaliana Glutathione S-Transferase1), ATGPX6 (Glutathione peroxidase 6), and ATMRP 14 (Arabidopsis thaliana Multidrug Resistance associated Protein 14) were identified from QTL intervals and microarray study. Functional characterization of these candidate genes could enhance phytoremediation capabilities of Populus.

Air pollution tolerance indices of some plants around Ama industrial ...

African Journals Online (AJOL)

Air pollution tolerance indices of some plants around Ama industrial complex in ... The total chlorophyll, ascorbic acid, pH, and relative water content of the leaf ... which contribute to green house effect, global warming and climate change.

Remember Tolerance Differently

DEFF Research Database (Denmark)

Tønder, Lars

2012-01-01

This essay questions the linear conception of history which often accompanies the way contemporary democratic theory tends to disavow tolerance's discontinuities and remainders. In the spirit of Foucault's genealogy of descent, the idea is to develop a new sense of tolerance's history, not by inv......This essay questions the linear conception of history which often accompanies the way contemporary democratic theory tends to disavow tolerance's discontinuities and remainders. In the spirit of Foucault's genealogy of descent, the idea is to develop a new sense of tolerance's history......, not by invoking a critique external to contemporary democratic theory, but by witnessing the history of tolerance paraliptically, with an eye to what it obscures and yet presupposes....

Hacia un inventario provisional de las tendencias en Bibliotecología y Ciencia de la Información = Towards a provisional inventory of trends in Library and Information Science.

Directory of Open Access Journals (Sweden)

Alejandro E. Parada

2015-12-01

Full Text Available Este trabajo se presentó como un documento de debate y reflexión en las 1º Jornadas Nacionales de Docentes e Investigadores Universitarios en Ciencia de la Información (DUCI, llevadas a cabo el 3 y 4 de septiembre de 2015 en la Biblioteca Nacional Mariano Moreno. En el texto se señalan, en forma preliminar y provisional, algunas de las perspectivas más importantes de la Bibliotecología y Ciencia de la Información (BCI. En este contexto se citan las siguientes: la crisis de la denominación propia de la identidad, el papel del liderazgo de la profesión en la Web 2.0, el tópico de la cogestión entre los bibliotecarios y los usuarios, las potencialidades de autorrepresentación y deliberación de las bibliotecas, las dimensiones tecnológicas, la construcción de la lingüística profesional, la importancia del análisis de dominio en la web semántica y sus relaciones con el lenguaje, la tendencia a la inclusión, la gestación de los portales de acceso abierto, el paradigma de la diversidad polimórfica, la dimensión teórica y de índole filosófica, entre otras muchas. Finalmente, se señala la trascendencia de la BCI como una disciplina de la pluralidad y diversidad virtual, y como un campo en estado de apertura para que los ciudadanos transformen la información en conocimiento = This work was presented as a document for debate and reflection in the 1º Jornadas Nacionales de Docentes e Investigadores Universitarios en Ciencia de la Información (DUCI held on 3rd and 4th September 2015 at the Biblioteca Nacional Mariano Moreno. The text indicates, in preliminary and provisional way, some of the most important perspectives of Library and Information Science. In this context, the following perspectives are mentioned: The crisis of the identity denomination, the role of leadership of the profession in the Web 2.0, the topic of co-management between librarians and users, the potential of self-representation and deliberation in

Induced tolerance from a sublethal insecticide leads to cross-tolerance to other insecticides.

Science.gov (United States)

Hua, Jessica; Jones, Devin K; Relyea, Rick A

2014-04-01

As global pesticide use increases, the ability to rapidly respond to pesticides by increasing tolerance has important implications for the persistence of nontarget organisms. A recent study of larval amphibians discovered that increased tolerance can be induced by an early exposure to low concentrations of a pesticide. Since natural systems are often exposed to a variety of pesticides that vary in mode of action, we need to know whether the induction of increased tolerance to one pesticide confers increased tolerance to other pesticides. Using larval wood frogs (Lithobates sylvaticus), we investigated whether induction of increased tolerance to the insecticide carbaryl (AChE-inhibitor) can induce increased tolerance to other insecticides that have the same mode of action (chlorpyrifos, malathion) or a different mode of action (Na(+)channel-interfering insecticides; permethrin, cypermethrin). We found that embryonic exposure to sublethal concentrations of carbaryl induced higher tolerance to carbaryl and increased cross-tolerance to malathion and cypermethrin but not to chlorpyrifos or permethrin. In one case, the embryonic exposure to carbaryl induced tolerance in a nonlinear pattern (hormesis). These results demonstrate that that the newly discovered phenomenon of induced tolerance also provides induced cross-tolerance that is not restricted to pesticides with the same mode of action.

Shale gas. A provisional assessment of climate change and environmental impacts

International Nuclear Information System (INIS)

Wood, R.; Gilbert, P.; Sharmina, M.; Anderson, K.; Footitt, A.; Glynn, S.; Nicholls, F.

2011-01-01

This report, commissioned by The Co-operative, provides a provisional review and assessment of the risks and benefits of shale gas development, with the aim of informing The Co-operative's position on this 'unconventional' fuel source. The analysis within the report addresses two specific issues associated with the extraction and combustion of shale gas. Firstly, it outlines potential UK and global greenhouse gas (GHG) emissions arising from a range of scenarios building on current predictions of shale gas resources. Secondly, it explores the health and environmental risks associated with shale gas extraction. It should be stressed that a key issue in assessing these issues has been a paucity of reliable data. To date shale gas has only been exploited in the US and, while initial estimates have been made, it is difficult to quantify the possible resources in other parts of the globe, including the UK. Equally, information on health and environmental aspects is of variable quality and only now is there any systematic effort being undertaken to better understand these issues. Therefore, while every effort has been made to ensure the accuracy of the information in the report, it can only be as accurate as the information on which it draws. It is clear however, that while shale gas extraction, at a global level, does not involve the high energy and water inputs at the scale of other unconventional fuels, such as oil derived from tar sands, it does pose significant potential risks to human health and the environment. Principally, the potential for hazardous chemicals to enter groundwater via the extraction process must be subject to more thorough research prior to any expansion of the industry being considered. Additionally, while being promoted as a transition route to a low carbon future, none of the available evidence indicates that this is likely to be the case. It is difficult to envisage any situation other than shale gas largely being used in addition to other

The study of desiccation-tolerance in drying leaves of the desiccation-tolerant grass Sporobolus elongatus and the desiccation-sensitive grass Sporobolus pyramidalis.

Science.gov (United States)

Ghasempour, Hamid Reza; Kianian, Jahanbakheshe

2007-03-01

Hydrated leaves of the resurrection grass Sporobolus elongatus are not desiccation tolerant (DT), but moderate to severe drought stress can induce their DT with the leaves remain attach to drying intact plants. In vivo protein synthesis was studied with SDS-page of extracts of leaves of intact drying plants of S. elongatus (a desiccation-Tolerant grass (DT)) and S. pyramidalis (a desiccation-sensitive species (DS)). Free proline increased in drying leaves. Soluble sugar contents also increased with drying but were less than fully hydrated leaves at 8% RWC. Total protein also showed an increase with an exception at 8% RWC which showed a decrease. SDS-page of extracts of drying leaves of both DT and DS plants were studied as relative water contents (RWC) decreased. In first phase, DT species at 58% RWC (80-51% RWC range), two proteins increased in contents. In the second phase, at 8% (35-4% RWC range) two new bands increased and two bands decreased. In leaves of DS species some bands decreased as drying progressed. Also, as drying advanced free proline increased in DT species. Total protein increased as drying increased but at 8% RWC decreased. All data of results are consistent with current views about studied factors and their roles during drying and induction of desiccation tolerance in DT plants.

Tolerable Time-Varying Overflow on Grass-Covered Slopes

Directory of Open Access Journals (Sweden)

Steven A. Hughes

2015-03-01

Full Text Available Engineers require estimates of tolerable overtopping limits for grass-covered levees, dikes, and embankments that might experience steady overflow. Realistic tolerance estimates can be used for both resilient design and risk assessment. A simple framework is developed for estimating tolerable overtopping on grass-covered slopes caused by slowly-varying (in time overtopping discharge (e.g., events like storm surges or river flood waves. The framework adapts the well-known Hewlett curves of tolerable limiting velocity as a function of overflow duration. It has been hypothesized that the form of the Hewlett curves suggests that the grass erosion process is governed by the flow work on the slope above a critical threshold velocity (referred to as excess work, and the tolerable erosional limit is reached when the cumulative excess work exceeds a given value determined from the time-dependent Hewlett curves. The cumulative excess work is expressed in terms of overflow discharge above a critical discharge that slowly varies in time, similar to a discharge hydrograph. The methodology is easily applied using forecast storm surge hydrographs at specific locations where wave action is minimal. For preliminary planning purposes, when storm surge hydrographs are unavailable, hypothetical equations for the water level and overflow discharge hydrographs are proposed in terms of the values at maximum overflow and the total duration of overflow. An example application is given to illustrate use of the methodology.

Color stability and flexural strength of poly (methyl methacrylate) and bis-acrylic composite based provisional crown and bridge auto-polymerizing resins exposed to beverages and food dye: an in vitro study.

Science.gov (United States)

Gujjari, Anil K; Bhatnagar, Vishrut M; Basavaraju, Ravi M

2013-01-01

To evaluate the color stability and flexural strength of poly (methyl methacrylate) (PMMA) and bis-acrylic composite based provisional crown and bridge auto-polymerizing resins exposed to tea, coffee, cola, and food dye. Two provisional crown and bridge resins, one DPI self-cure tooth molding powder (PMMA) (Group A), and one Protemp 4 Temporization Material (bis-acrylic composite) (Group B) were used. Disk-shaped specimens for color stability testing (n = 30 for each material) and bar-shaped specimens for flexural strength testing (n = 30 for each material) were fabricated using a metal mold. The specimens were immersed in artificial saliva, artificial saliva + tea, artificial saliva + coffee, artificial saliva + cola, and artificial saliva + food dye solutions and stored in an incubator at 37°C. Color measurements were taken before immersion, and then after 3 and 7 days of immersion. Flexural strength was evaluated after 7 days of immersion. Group A showed significantly higher color stability as compared to Group B, and artificial saliva + coffee solution had the most staining capacity for the resins. Test solutions had no effect on the flexural strength of Group A, but Group B specimens immersed in artificial saliva + cola showed significantly lower flexural strength values as compared to the control group. The findings of the study showed that for materials used in the study, PMMA was more color stable than bis-acrylic composite based resin. Also, material based on PMMA was more resistant to damage from dietary beverages as compared to bis-acrylic composite based provisional crown and bridge resin.

Radiation tolerant design - theory and practice for proximity sensing

International Nuclear Information System (INIS)

Sharp, R.E.; Pater, S.L.; Cook, J.

1999-01-01

This paper provides a description of the radiation tolerant design process used to develop a range of proximity detectors with guaranteed total dose lifetime. It also describes some of the applications in which the detectors are being used and the benefits gained by plant operators. (authors)

Totally parallel multilevel algorithms

Science.gov (United States)

Frederickson, Paul O.

1988-01-01

Four totally parallel algorithms for the solution of a sparse linear system have common characteristics which become quite apparent when they are implemented on a highly parallel hypercube such as the CM2. These four algorithms are Parallel Superconvergent Multigrid (PSMG) of Frederickson and McBryan, Robust Multigrid (RMG) of Hackbusch, the FFT based Spectral Algorithm, and Parallel Cyclic Reduction. In fact, all four can be formulated as particular cases of the same totally parallel multilevel algorithm, which are referred to as TPMA. In certain cases the spectral radius of TPMA is zero, and it is recognized to be a direct algorithm. In many other cases the spectral radius, although not zero, is small enough that a single iteration per timestep keeps the local error within the required tolerance.

The Agency's Safeguards System (1965, as provisionally extended in 1966 and 1968); Le Systeme de Garanties de l'Agence (1965, provisoirement etendu en 1966 et 1968)

Energy Technology Data Exchange (ETDEWEB)

NONE

1968-09-24

The Agency's safeguards system, as approved by the Board of Governors in 1965, and provisionally extended in 1966, is set forth in this document for the Information of all Members [French] Le Systeme de garanties de l'Agence, approuve par le Conseil des gouverneurs en 1965 et provisoirement etendu en 1966 et 1968, est reproduit dans le present document pour l'information de tous les Membres.

Mechanistic Insight into Salt Tolerance of Acacia auriculiformis: The Importance of Ion Selectivity, Osmoprotection, Tissue Tolerance, and Na+ Exclusion

Science.gov (United States)

Rahman, Md. M.; Rahman, Md. A.; Miah, Md. G.; Saha, Satya R.; Karim, M. A.; Mostofa, Mohammad G.

2017-01-01

Salinity, one of the major environmental constraints, threatens soil health and consequently agricultural productivity worldwide. Acacia auriculiformis, being a halophyte, offers diverse benefits against soil salinity; however, the defense mechanisms underlying salt-tolerant capacity in A. auriculiformis are still elusive. In this study, we aimed to elucidate mechanisms regulating the adaptability of the multi-purpose perennial species A. auriculiformis to salt stress. The growth, ion homeostasis, osmoprotection, tissue tolerance and Na+ exclusion, and anatomical adjustments of A. auriculiformis grown in varied doses of seawater for 90 and 150 days were assessed. Results showed that diluted seawater caused notable reductions in the level of growth-related parameters, relative water content, stomatal conductance, photosynthetic pigments, proteins, and carbohydrates in dose- and time-dependent manners. However, the percent reduction of these parameters did not exceed 50% of those of control plants. Na+ contents in phyllodes and roots increased with increasing levels of salinity, whereas K+ contents and K+/Na+ ratio decreased significantly in comparison with control plants. A. auriculiformis retained more Na+ in the roots and maintained higher levels of K+, Ca2+ and Mg2+, and K+/Na+ ratio in phyllodes than roots through ion selective capacity. The contents of proline, total free amino acids, total sugars and reducing sugars significantly accumulated together with the levels of malondialdehyde and electrolyte leakage in the phyllodes, particularly at day 150th of salt treatment. Anatomical investigations revealed various anatomical changes in the tissues of phyllodes, stems and roots by salt stress, such as increase in the size of spongy parenchyma of phyllodes, endodermal thickness of stems and roots, and the diameter of root vascular bundle, relative to control counterparts. Furthermore, the estimated values for Na+ exclusion and tissue tolerance index suggested that

Evaluation of geological documents available for provisional safety analyses of potential sites for nuclear waste repositories - Are additional geological investigations needed?

International Nuclear Information System (INIS)

2010-10-01

The procedure for selecting repository sites for all categories of radioactive waste in Switzerland is defined in the conceptual part of the Sectoral Plan for Deep Geological Repositories, which foresees a selection of sites in three stages. In Stage I, Nagra proposed geological siting regions based on criteria relating to safety and engineering feasibility. The Swiss Government (the Federal Council) is expected to decide on the siting proposals in 2011. The objective of Stage 2 is to prepare proposals for the location of the surface facilities within the planning perimeters defined by the Federal Council in its decision on Stage 1 and to identify potential sites. Nagra also has to carry out a provisional safety analysis for each site and a safety-based comparison of the sites. Based on this, and taking into account the results of the socio-economic-ecological impact studies, Nagra then has to propose at least two sites for each repository type to be carried through to Stage 3. The proposed sites will then be investigated in more detail in Stage 3 to ensure that the selection of the sites for the General Licence Applications is well founded. In order to realise the objectives of the upcoming Stage 2, the state of knowledge of the geological conditions at the sites has to be sufficient to perform the provisional safety analyses. Therefore, in preparation for Stage 2, the conceptual part of the Sectoral Plan requires Nagra to clarify the need for additional investigations aimed at providing input for the provisional safety analyses. The purpose of the present report is to document Nagra's technical-scientific assessment of this need. The focus is on evaluating the geological information based on processes and parameters that are relevant for safety and engineering feasibility. In evaluating the state of knowledge the key question is whether additional information could lead to a different decision regarding the selection of the sites to be carried through to Stage 3

Co-occurrence and genotypic distribution of Phytophthora species recovered from watersheds and plant nurseries of eastern Tennessee.

Science.gov (United States)

Hulvey, Jon; Gobena, Daniel; Finley, Ledare; Lamour, Kurt

2010-01-01

In 2008 statewide surveys of symptomatic foliage of nursery plants from Tennessee resulted in isolation of 43 isolates of Phytophthora spp. This sample set includes four described species (P. citrophthora, P. citricola, P. nicotianae, P. syringae), and a provisional species of Phytophthora ('P. hydropathica'). At the same time a stream-baiting survey was initiated to recover Phytophthora from eight watersheds in eastern Tennessee, some of which are near plant nurseries. Baiting was accomplished by submerging healthy Rhododendron leaves approximately 1 wk and isolation onto selective media. Six baiting periods were completed, and in total 98 Phytophthora isolates and 45 isolates of Pythium spp. were recovered. Three described species (P. citrophthora, P. citricola and P. irrigata) and the provisional species 'P. hydropathica' were obtained as well as three undescribed Phytophthora taxa and Pythium litorale. Isolates from both surveys were identified to species with morphology and the internal transcribed spacer (ITS) sequence. Isolates from species co-occurring in streams and nurseries (P. citricola, P. citrophthora and 'P. hydropathica') were characterized further with amplified fragment length polymorphism (AFLP) analyses and mefenoxam tolerance assays. Isolates representing a putative clonal genotype of P. citricola were obtained from both environmental and nursery sample sets.

Quantitative Trait Loci for Mercury Tolerance in Rice Seedlings

Directory of Open Access Journals (Sweden)

Chong-qing WANG

2013-05-01

Full Text Available Mercury (Hg is one of the most toxic heavy metals to living organisms and its conspicuous effect is the inhibition of root growth. However, little is known about the molecular genetic basis for root growth under excess Hg2+ stress. To map quantitative trait loci (QTLs in rice for Hg2+ tolerance, a population of 120 recombinant inbred lines derived from a cross between two japonica cultivars Yuefu and IRAT109 was grown in 0.5 mmol/L CaCl2 solution. Relative root length (RRL, percentage of the seminal root length in +HgCl2 to –HgCl2, was used for assessing Hg2+ tolerance. In a dose-response experiment, Yuefu had a higher RRL than IRAT109 and showed the most significant difference at the Hg2+ concentration of 1.5 μmol/L. Three putative QTLs for RRL were detected on chromosomes 1, 2 and 5, and totally explained about 35.7% of the phenotypic variance in Hg2+ tolerance. The identified QTLs for RRL might be useful for improving Hg2+ tolerance of rice by molecular marker-assisted selection.

Interactions of climate, socio-economics, and global mercury pollution in the North Water.

Science.gov (United States)

Dietz, Rune; Mosbech, Anders; Flora, Janne; Eulaers, Igor

2018-04-01

Despite the remoteness of the North Water, Northwest Greenland, the local Inughuit population is affected by global anthropogenic pollution and climate change. Using a cross-disciplinary approach combining Mercury (Hg) analysis, catch information, and historical and anthropological perspectives, this article elucidates how the traditional diet is compromised by Hg pollution originating from lower latitudes. In a new approach we here show how the Inughuits in Avanersuaq are subject to high Hg exposure from the hunted traditional food, consisting of mainly marine seabirds and mammals. Violation of the provisional tolerably yearly intake of Hg, on average by a factor of 11 (range 7-15) over the last 20 years as well as the provisional tolerably monthly intake by a factor of 6 (range 2-16), raises health concerns. The surplus of Selenium (Se) in wildlife tissues including narwhals showed Se:Hg molar ratios of 1.5, 2.3, and 16.7 in muscle, liver, and mattak, respectively, likely to provide some protection against the high Hg exposure.

La Evoluci?n de la percepci?n del rol del IRA Provisional a partir de est?mulos generados por el Sistema Internacional

OpenAIRE

Cort?s Rojas, Mar?a Alejandra

2017-01-01

Esta investigaci?n tiene como objetivo explicar los cambios en la forma de lucha, tanto armada como pol?tica, del IRA Provisional a partir del surgimiento de movimientos por los derechos civiles en Estados Unidos, el fin de la Guerra Fr?a y la deslegitimaci?n de los movimientos anti-imperialistas, el auge econ?mico irland?s y la expansi?n de los valores de la Uni?n Europea. Estos cambios pueden verse explicados por la forma en la que el grupo cambia su percepci?n del rol que desarrolla dentro...

Occupational stress and suicidality among firefighters: Examining the buffering role of distress tolerance.

Science.gov (United States)

Stanley, Ian H; Boffa, Joseph W; Smith, Lia J; Tran, Jana K; Schmidt, N Brad; Joiner, Thomas E; Vujanovic, Anka A

2018-05-24

Past research indicates that firefighters are at increased risk for suicide. Firefighter-specific occupational stress may contribute to elevated suicidality. Among a large sample of firefighters, this study examined if occupational stress is associated with multiple indicators of suicide risk, and whether distress tolerance, the perceived and/or actual ability to endure negative emotional or physical states, attenuates these associations. A total of 831 firefighters participated (mean [SD] age = 38.37y[8.53y]; 94.5% male; 75.2% White). The Sources of Occupational Stress-14 (SOOS-14), Distress Tolerance Scale (DTS), and Suicidal Behaviors Questionnaire-Revised (SBQ-R) were utilized to examine firefighter-specific occupational stress, distress tolerance, and suicidality, respectively. Consistent with predictions, occupational stress interacted with distress tolerance, such that the effects of occupational stress on suicide risk, broadly, as well as lifetime suicide threats and current suicidal intent, specifically, were attenuated at high levels of distress tolerance. Distress tolerance may buffer the effects of occupational stress on suicidality among firefighters. Pending replication, findings suggest that distress tolerance may be a viable target for suicide prevention initiatives within the fire service. Copyright © 2018 Elsevier B.V. All rights reserved.

Soft Tissue Augmentation Techniques in Implants Placed and Provisionalized Immediately: A Systematic Review

Directory of Open Access Journals (Sweden)

Rosa Rojo

2016-01-01

Full Text Available The aim of this study was to evaluate the effectiveness of techniques for soft tissue augmentation in the placement of immediate implants with and without provisionalization and to assess the quality of the reports in the literature. Randomized clinical trials, prospective clinical trials, and case series were included in this review. Clinical questions were formulated and organised according to the PICOS strategy. An electronic search was performed in PubMed, Cochrane Central Register of Controlled Trials, Scopus, and ISI Web up until June 2016. Interexaminer agreement on eligibility (k=0.842; p=0.103 and quality (k=0.933; p<0.001 was high. Methodological approaches were assessed using criteria based on design related forms designed by the Dutch Cochrane Collaboration. Finally, 14 papers were identified. In two studies, the implant survival was 90%; for the rest of the studies it was 100%. All studies reported favourable aesthetic, biological, and radiographic outcomes. Surgical and biomechanical complications of this technique were not relevant. This technique effectively compensates for the expected loss of volume of the oral soft tissues and maintains high success rates with good aesthetic results over time.

Provisional Tic Disorder: What to tell parents when their child first starts ticcing.

Science.gov (United States)

Black, Kevin J; Black, Elizabeth Rose; Greene, Deanna J; Schlaggar, Bradley L

2016-01-01

The child with recent onset of tics is a common patient in a pediatrics or child neurology practice. If the child's first tic was less than a year in the past, the diagnosis is usually Provisional Tic Disorder (PTD). Published reviews by experts reveal substantial consensus on prognosis in this situation: the tics will almost always disappear in a few months, having remained mild while they lasted. Surprisingly, however, the sparse existing data may not support these opinions. PTD may have just as much importance for science as for clinical care. It provides an opportunity to prospectively observe the spontaneous remission of tics. Such prospective studies may aid identification of genes or biomarkers specifically associated with remission rather than onset of tics. A better understanding of tic remission may also suggest novel treatment strategies for Tourette syndrome, or may lead to secondary prevention of tic disorders. This review summarizes the limited existing data on the epidemiology, phenomenology, and outcome of PTD, highlights areas in which prospective study is sorely needed, and proposes that tic disorders may completely remit much less often than is generally believed.

Provisional Tic Disorder: What to tell parents when their child first starts ticcing

Science.gov (United States)

Black, Kevin J; Black, Elizabeth Rose; Greene, Deanna J.; Schlaggar, Bradley L.

2016-01-01

The child with recent onset of tics is a common patient in a pediatrics or child neurology practice. If the child’s first tic was less than a year in the past, the diagnosis is usually Provisional Tic Disorder (PTD). Published reviews by experts reveal substantial consensus on prognosis in this situation: the tics will almost always disappear in a few months, having remained mild while they lasted. Surprisingly, however, the sparse existing data may not support these opinions. PTD may have just as much importance for science as for clinical care. It provides an opportunity to prospectively observe the spontaneous remission of tics. Such prospective studies may aid identification of genes or biomarkers specifically associated with remission rather than onset of tics. A better understanding of tic remission may also suggest novel treatment strategies for Tourette syndrome, or may lead to secondary prevention of tic disorders. This review summarizes the limited existing data on the epidemiology, phenomenology, and outcome of PTD, highlights areas in which prospective study is sorely needed, and proposes that tic disorders may completely remit much less often than is generally believed. PMID:27158458

En Route Descent Advisor Multi-Sector Planning Using Active and Provisional Controller Plans

Science.gov (United States)

Vivona, Robert; Green, Steven

2003-01-01

As decision support tools are developed to support controllers in complex air traffic control environments, new approaches to maintaining situation awareness and managing traffic planning must be developed to handle the ever-increasing amounts of alerting and advisory data. Within high-density metering and other environments where flight path changes are the rule, not the exception, and where interactions between these changes are required, current trial planning approaches are limited by potential increases in workload. The Enroute Descent Advisor (EDA) is a set of decision support tool capabilities for managing high-density en route traffic subject to metering restrictions. The EDA system s novel approach builds aircraft plans from combinations of user intent data and builds controller plans from combinations of aircraft plans to effectively maintain situation awareness during traffic planning. By maintaining both active (current) and provisional (proposed) controller plans, EDA supports controllers in coordinated traffic planning both within and between sectors. Ultimately, EDA s multi-sector planning approach will facilitate a transition from current sector-oriented operations to a new trajectory-oriented paradigm, enabling new levels of efficiency and collaboration in air traffic control.

Instrucción provisional para el empleo de puntos de soldadura eléctrica por resistencia en las construcciones de acero

Directory of Open Access Journals (Sweden)

Batanero, J.

1963-06-01

Full Text Available As an initial measure to generalise spot welding in the field of metallic structures, the Deutsche Ausschuss fur Stahlbau has issued a provisional specification, of which a full translation is given in this paper. The Specification includes a number of rules, as well as comments and recommendations on the method of establishing the aptitude of a given firm, or a workshop, to practise this spot welding technique. The various chapters of these Specifications give an account of the fundamental calculation principles and the best practise that should be followed in this type of welding. Advise is also offered on the initial care to be taken in applying these principles and specifications in actual practice. The comments that follow serve to clarify and explain the reasons which underlie the various conditions specified in this text. Finally, the recommendations on the method of establishing the aptitude of given workshops to undertake spot welding work are based on the following principle: the construction of structures with spot welded joints can only be entrusted to people who have attained a certain standard of skill, precisely because these structures are meant to be load bearing, and their real strength cannot be checked in practise, a posteriori, except by means of destruction tests. The full text of these Provisional Specifications will be given in three consecutive numbers of the magazine.La soldadura por resistencia es un medio de unión que, en ocasiones, puede resultar muy cómodo y económico. En las estructuras metálicas puras se ha venido empleando poco hasta ahora, aunque su utilización estaba bastante difundida en el empalme a tope de redondos, formación de parrillas de losas y tuberías, etc., con destino a las estructuras de hormigón. Sin embargo, las experiencias realizadas en los últimos años han demostrado que los puntos de soldadura por resistencia pueden constituir medios de unión que, bajo ciertas condiciones

Antigen-specific tolerance inhibits autoimmune uveitis in pre-sensitized animals by deletion and CD4+CD25+ T-regulatory cells.

Science.gov (United States)

Matta, Bharati; Jha, Purushottam; Bora, Puran S; Bora, Nalini S

2010-02-01

The objective of this study was to inhibit experimental autoimmune anterior uveitis (EAAU) by establishing antigen-specific immune tolerance in animals pre-sensitized with melanin-associated antigen (MAA). Intravenous administration of MAA on days 6, 7, 8 and 9 post-immunization induced tolerance and inhibited EAAU in all Lewis rats. The number of cells (total T cells, CD4(+) T cells and CD8(+) T cells) undergoing apoptosis dramatically increased in the popliteal lymph nodes (LNs) of the tolerized animals compared with non-tolerized animals. In addition, Fas ligand (FasL), TNF receptor 1 (TNFR1) and caspase-8 were upregulated in tolerized rats. Proliferation of total lymphocytes, CD4(+)T cells and CD8(+) T cells (harvested from the popliteal LNs) in response to antigenic stimulation was drastically reduced in the state of tolerance compared with the cells from non-tolerized animals. The level of interferon (IFN)-gamma and IL-2 decreased, whereas TGF-beta2 was elevated in the state of tolerance. Furthermore, the number of CD4(+)CD25(+)FoxP3(+) regulatory T cells (Tregs) increased in the popliteal LNs of tolerized animals compared with non-tolerized animals. In conclusion, our results suggest that deletion of antigen-specific T cells by apoptosis and active suppression mediated by Tregs has an important role in the induction of antigen specific immune tolerance in animals with an established immune response against MAA.

Glucose tolerance in obese pregnant women determines newborn fat mass

DEFF Research Database (Denmark)

Carlsen, Emma Malchau; Renault, Kristina Martha; Nørgaard, Kirsten

2016-01-01

INTRODUCTION: Offspring of obese women have both short- and long-term increased morbidities. We investigated the relationship between maternal 2-h plasma glucose level determined by oral glucose tolerance test, degree of obesity, gestational weight gain and total fat, abdominal fat, and fat-free ...

Fault Tolerant Feedback Control

DEFF Research Database (Denmark)

Stoustrup, Jakob; Niemann, H.

2001-01-01

An architecture for fault tolerant feedback controllers based on the Youla parameterization is suggested. It is shown that the Youla parameterization will give a residual vector directly in connection with the fault diagnosis part of the fault tolerant feedback controller. It turns out...... that there is a separation be-tween the feedback controller and the fault tolerant part. The closed loop feedback properties are handled by the nominal feedback controller and the fault tolerant part is handled by the design of the Youla parameter. The design of the fault tolerant part will not affect the design...... of the nominal feedback con-troller....

Color stability and flexural strength of poly (methyl methacrylate and bis-acrylic composite based provisional crown and bridge auto-polymerizing resins exposed to beverages and food dye: An in vitro study

Directory of Open Access Journals (Sweden)

Anil K Gujjari

2013-01-01

Full Text Available Aim: To evaluate the color stability and flexural strength of poly (methyl methacrylate (PMMA and bis-acrylic composite based provisional crown and bridge auto-polymerizing resins exposed to tea, coffee, cola, and food dye. Materials and Methods: Two provisional crown and bridge resins, one DPI self-cure tooth molding powder (PMMA (Group A, and one Protemp 4 Temporization Material (bis-acrylic composite (Group B were used. Disk-shaped specimens for color stability testing (n = 30 for each material and bar-shaped specimens for flexural strength testing (n = 30 for each material were fabricated using a metal mold. The specimens were immersed in artificial saliva, artificial saliva + tea, artificial saliva + coffee, artificial saliva + cola, and artificial saliva + food dye solutions and stored in an incubator at 37°C. Color measurements were taken before immersion, and then after 3 and 7 days of immersion. Flexural strength was evaluated after 7 days of immersion. Results: Group A showed significantly higher color stability as compared to Group B, and artificial saliva + coffee solution had the most staining capacity for the resins. Test solutions had no effect on the flexural strength of Group A, but Group B specimens immersed in artificial saliva + cola showed significantly lower flexural strength values as compared to the control group. Conclusion: The findings of the study showed that for materials used in the study, PMMA was more color stable than bis-acrylic composite based resin. Also, material based on PMMA was more resistant to damage from dietary beverages as compared to bis-acrylic composite based provisional crown and bridge resin.

Genotypic variation for salinity tolerance in Cenchrus ciliaris L

Directory of Open Access Journals (Sweden)

M. Iftikhar Hussain

2016-07-01

Full Text Available Scarcity of irrigation water and increasing soil salinization has threatened the sustainability of forage production in arid and semi-arid region around the globe. Introduction of salt-tolerant perennial species is a promising alternative to overcome forage deficit to meet future livestock needs in salt-affected areas. This study presents the results of a salinity tolerance screening trial which was carried out in plastic pots buried in the open field for 160 buffelgrass (Cenchrus ciliaris L. accessions for three consecutive years (2003-2005. The plastic pots were filled with sand, organic, and peat moss mix and were irrigated with four different quality water (EC 0, 10, 15, and 20 dS m-1. The results indicate that the average annual dry weights (DW were in the range from 122.5 – 148.9 g pot-1 in control; 96.4 – 133.8 g pot-1 at 10 dS m-1; 65.6 – 80.4 g pot-1 at 15 dS m-1, and 55.4- 65.6 g pot-1 at 20 dS m-1. The highest DW (148.9 g pot-1 was found with accession 49 and the lowest with accession 23. Principle component analysis shows that PC-1 contributed 81.8 % of the total variability, while PC-2 depicted 11.7% of the total variation among C. ciliaris accessions for DW. Hierarchical cluster analysis revealed that a number of accessions collected from diverse regions could be grouped into a single cluster. Accessions 3, 133, 159, 30, 23, 142, 141, 95, 49, 129, 124, and 127 were stable, salt tolerant, and produced good dry biomass yield. These accessions demonstrate sufficient salinity tolerance potential for promotion in marginal land and arid regions to enhance farm productivity and reduce rural poverty.

Public utilities and the public interest - raising and acknowledging this claim in proceedings concerning provisional legal protection

International Nuclear Information System (INIS)

Fischerhof, H.

1976-01-01

The following can be said of appeal proceedings against provisionally granted legal protection as claimed according to section 5 article 80 VwGO, the public utilities attending the proceedings, but not the licensing authority, being in the position to file this appeal: 1) The licensing authority takes part in the appeal proceedings and has the right to be heard. The licensing authority can also continue to act in the public interest in order to maintain the ordinances it issued, ordinances which were ordered to take immediate effect with public interest in mind. 2) The court of appeal has to examine the factual and the legal aspects of the previous instance's decision. 3) The public utility as the complainant can, within the framework of its official duties, combine the public interest with its own interests. (orig./HP) [de

'Managing' the immune system with total lymphoid irradiation

International Nuclear Information System (INIS)

Strober, S.

1981-01-01

Total lymphoid irradiation (TLI), which in the past was limited to the treatment of malignant disease, is now emerging as a practical technique in the management of unwanted immune reactions in the areas of transplant tolerance and various autoimmune diseases. Current studies are particularly promising for application of TLI in rheumatoid arthritis and lupus nephritis

Toleration out of respect?

DEFF Research Database (Denmark)

Lægaard, Sune

2013-01-01

Under conditions of pluralism different cultures, interests or values can come into conflict, which raises the problem of how to secure peaceful co-existence. The idea of toleration historically emerged as an answer to this problem. Recently Rainer Forst has argued that toleration should not just...... be based on a modus vivendi designed to secure peaceful co-existence, but should be based on moral reasons. Forst therefore advances what he calls the ‘respect conception’ of toleration as an in itself morally desirable type of relationship, which is furthermore the only conception of toleration...... that avoids various so-called ‘paradoxes of toleration’. The paper first examines whether Forst’s respect conception can be applied descriptively to distinguish between actual patterns of behaviour and classify different acts of toleration. Then the focus is shifted to toleration out of respect as a normative...

Air Pollution tolerance indices (apti) of some plants around Otorogun ...

African Journals Online (AJOL)

MICHAEL

ABSTRACT: The study examined the air pollution tolerance indices (APTI) of six plant species around. Otorogun gas plant in Ughelli-South Local Government Area of Delta State. Four physiological and biochemical parameters, which are leaf relative water content (RWC), Ascorbic acid content (AA), total leaf chlorophyll ...

The political limit of tolerance O limite político da tolerância

Directory of Open Access Journals (Sweden)

Joseph Yvon Thériault

2008-06-01

Full Text Available In the contemporary discussions about democracy modifications, tolerance has been frequently evoked in order to express the way by which the democracies respond to the new demands of plurality recognition. While drawing the general lines of the connection between tolerance and democracy, the present article intends to deepen the comprehension of tolerance’s places and limits inside the democracy. After that, the text should evaluate the reach of the contemporary use of tolerance. Keywords: Democracy. Tolerance. Political theory. National Identity. Nas discussões contemporâneas sobre as transformações da democracia, a tolerância é com freqüência evocada para expressar o modo pelo qual as democracias respondem às novas exigências de reconhecimento da pluralidade. Ao esboçar as linhas gerais da relação entre tolerância e democracia, o presente artigo pretende aprofundar a compreensão do lugar e dos limites da tolerância na democracia. Em um segundo momento, tratará de avaliar o alcance do uso contemporâneo da tolerância. Palavras-chave: Democracia. Tolerância. Teoria Política. Identidade Nacional.

Assessment of the Swedish EQ-5D experience-based value sets in a total hip replacement population.

Science.gov (United States)

Nemes, Szilárd; Burström, Kristina; Zethraeus, Niklas; Eneqvist, Ted; Garellick, Göran; Rolfson, Ola

2015-12-01

All patients undergoing elective total hip replacement (THR) in Sweden are asked to complete a survey, including the EQ-5D. Thus far, EQ-5D values have been presented using the UK TTO value set based on hypothetical values. Shift to the use of the recently introduced Swedish experience-based value set, derived from a representative Swedish population, is an appealing alternative. To investigate how accurate the Swedish experience-based VAS value set predicts observed EQ VAS values and to compare correlations between Swedish and UK value sets including two provisional value sets derived from the THR population. Pre- and one-year postoperative data from 56,062 THR patients from the Swedish Hip Arthroplasty Register were used. Agreement between the observed and the predicted EQ VAS values was assessed with correlation. Based on pre- and postoperative data, we constructed two provisional VAS value sets. Correlations between observed and calculated values using the Swedish VAS value set were moderate (r = 0.46) in preoperative data and high (r = 0.72) in postoperative data. Correlations between UK and register-based value sets were constantly lower compared to Swedish value sets. Register-based values and Swedish values were highly correlated. The Swedish value sets are more accurate in terms of representation of the Swedish THR patients than the currently used UK TTO value set. We find it feasible to use the experience-based Swedish value sets for further presentation of EQ-5D values in the Swedish THR population.

Thermo-tolerant phosphate-solubilizing microbes for multi-functional biofertilizer preparation.

Science.gov (United States)

Chang, Cheng-Hsiung; Yang, Shang-Shyng

2009-02-01

In order to prepare the multi-functional biofertilizer, thermo-tolerant phosphate-solubilizing microbes including bacteria, actinomycetes, and fungi were isolated from different compost plants and biofertilizers. Except Streptomycesthermophilus J57 which lacked pectinase, all isolates possessed amylase, CMCase, chitinase, pectinase, protease, lipase, and nitrogenase activities. All isolates could solubilize calcium phosphate and Israel rock phosphate; various isolates could solubilize aluminum phosphate, iron phosphate, and hydroxyapatite. During composting, biofertilizers inoculated with the tested microbes had a significantly higher temperature, ash content, pH, total nitrogen, soluble phosphorus content, and germination rate than non-inoculated biofertilizer; total organic carbon and carbon-to-nitrogen ratio showed the opposite pattern. Adding these microbes can shorten the period of maturity, improve the quality, increase the soluble phosphorus content, and enhance the populations of phosphate-solubilizing and proteolytic microbes in biofertilizers. Therefore, inoculating thermo-tolerant phosphate-solubilizing microbes into agricultural and animal wastes represents a practical strategy for preparing multi-functional biofertilizer.

Tolerance in Drosophila

OpenAIRE

Atkinson, Nigel S.

2009-01-01

The set of genes that underlie ethanol tolerance (inducible resistance) are likely to overlap with the set of genes responsible for ethanol addiction. Whereas addiction is difficult to recognize in simple model systems, behavioral tolerance is readily identifiable and can be induced in large populations of animals. Thus, tolerance lends itself to analysis in model systems with powerful genetics. Drosophila melanogaster has been used by a variety of laboratories for the identification of genes...

Male Gametophytic Screening of Citrus Genotypes for Salt Stress Tolerance

Directory of Open Access Journals (Sweden)

A. Barandan

2016-07-01

Full Text Available Citrus species are classified as a sensitive group of trees to salt stress, but the levels of their sensitivity or tolerance to salt are different among cultivars. In order to evaluate the effects of salinity stress on pollen germination of some citrus cultivars, an experiment was performed in factorial, based on completely randomized design in three replications with Cleopatra mandarin (Citrus reshni and Poncirus trifoliata as tolerant and sensitive controls along with 13 genotypes. Pollen grains of these genotypes were cultured in media containing different levels of sodium chloride (0, 0.87, 1.6, 2.4, 3.1 dS/m along with 15% sucrose, 0.7% agar and 100 mg/L boric acid. In order to understand the biochemical responses of pollen grains to salt stress, they were cultured in liquid media with three levels of salinity (i.e. 0, 0.87 and 1.6 dS/m and then the amounts of total protein and enzyme activities of superoxide dismutase (SOD and ascorbate peroxidase (APX were evaluated. Significant differences of pollen germination (P ≤ 0.01 were observed in different salinity levels, but there were no significant differences in pollen tube growth. Pollen germination in Cleopatra was greater in comparison to Poncirus trifoliate, indicating that Cleopatra is a tolerant cultivar. The amounts of total protein and enzyme activities of SOD and APX were influenced by genotypes, salinity levels and their interactions (P ≤ 0.01. Considering the fastness and accuracy of this type of experiment, the evaluation of citrus pollen responses may, potentially, be hired as an initial screening criteria for detecting salt-sensitive varieties from the tolerant citrus ones.

Prediction of Glucose Tolerance without an Oral Glucose Tolerance Test

Directory of Open Access Journals (Sweden)

Rohit Babbar

2018-03-01

Full Text Available IntroductionImpaired glucose tolerance (IGT is diagnosed by a standardized oral glucose tolerance test (OGTT. However, the OGTT is laborious, and when not performed, glucose tolerance cannot be determined from fasting samples retrospectively. We tested if glucose tolerance status is reasonably predictable from a combination of demographic, anthropometric, and laboratory data assessed at one time point in a fasting state.MethodsGiven a set of 22 variables selected upon clinical feasibility such as sex, age, height, weight, waist circumference, blood pressure, fasting glucose, HbA1c, hemoglobin, mean corpuscular volume, serum potassium, fasting levels of insulin, C-peptide, triglyceride, non-esterified fatty acids (NEFA, proinsulin, prolactin, cholesterol, low-density lipoprotein, HDL, uric acid, liver transaminases, and ferritin, we used supervised machine learning to estimate glucose tolerance status in 2,337 participants of the TUEF study who were recruited before 2012. We tested the performance of 10 different machine learning classifiers on data from 929 participants in the test set who were recruited after 2012. In addition, reproducibility of IGT was analyzed in 78 participants who had 2 repeated OGTTs within 1 year.ResultsThe most accurate prediction of IGT was reached with the recursive partitioning method (accuracy = 0.78. For all classifiers, mean accuracy was 0.73 ± 0.04. The most important model variable was fasting glucose in all models. Using mean variable importance across all models, fasting glucose was followed by NEFA, triglycerides, HbA1c, and C-peptide. The accuracy of predicting IGT from a previous OGTT was 0.77.ConclusionMachine learning methods yield moderate accuracy in predicting glucose tolerance from a wide set of clinical and laboratory variables. A substitution of OGTT does not currently seem to be feasible. An important constraint could be the limited reproducibility of glucose tolerance status during a

Selection and genetic relationship of salt tolerant rice mutants by in vitro mutagenesis

Energy Technology Data Exchange (ETDEWEB)

Song, Jae Young; Kim, Dong Sub; Lee, Kyung Jun; Kim, Jin Baek; Kim, Sang Hoon; Kang, Si Yong [Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of); Lee, Myung Chul [National Academy of Agriculture and Science, Suwon (Korea, Republic of); Yun, Song Joong [Chonbuk National University, Jeonju (Korea, Republic of)

2010-12-15

Plants have evolved physiological, biochemical and metabolic mechanisms to increase their survival under the adverse conditions. This present study has been performed to select salt tolerant rice mutant lines through in vivo and in vitro mutagenesis with gamma-rays. For the selection of the salt-tolerant rice mutants, we conducted three times of selection procedure using 1,500 gamma ray mutant lines resulted from an embryo culture of the original rice cv. Dongan (wild-type, WT): first, selection in the a nutrient solution with 171 mM NaCI: second, selection under in vitro condition with 171 mM NaCI: and third, selection in a reclaimed saline land. Based on a growth comparison of the entries, out of the mutant lines, two putative 2 salt tolerant (ST) rice mutant lines, ST-87 and ST-301, were finally selected. The survival rate of the WT, ST-87 and ST-301 were 36.6%, 60% and 66.3% after 7 days in 171 mM NaCI treatment, respectively. The WT and two salt tolerant mutant lines were used to analyze their genetic variations. A total of 21 EcoRI and Msel primer combinations were used to analyze the genetic relationship of among the two salt tolerant lines and the WT using the ABI3130 capillary electrophoresis system. In the AFLP analysis, a total of 1469 bands were produced by the 21 primer combinations, and 700 (47.6%) of them were identified as having polymorphism. The genetic similarity coefficients were ranged from 0.52 between the ST-87 and WT to 0.24 between the ST-301 and the WT. These rice mutant lines will be used as a control plot for physiological analysis and genetic research on salt tolerance.

Tolerância de frutos de pessegueiro a geadas Fruit frost tolerance in peach

Directory of Open Access Journals (Sweden)

André Paulo Assmann

2008-12-01

Full Text Available Este trabalho teve como objetivo avaliar a tolerância de frutos de pessegueiro aos danos ocasionados pela geada. A geada ocorreu no dia 5 de setembro de 2006, sendo que a temperatura mínima, a 1,5 m do solo, foi de - 1,06ºC. Foram avaliados 28 genótipos de pessegueiro em diferentes estádios fenológicos. O delineamento experimental foi o inteiramente casualizado, com três repetições (plantas de pessegueiro, procedendo-se à avaliação em seis ramos por planta. No dia em que ocorreu a geada, foram mensurados o número de frutos por ramo, diâmetro sutural médio dos frutos, número total de gemas vegetativas, percentual de brotação e percentual de brindilas formadas a partir das gemas brotadas. Uma segunda avaliação foi realizada 15 dias após a primeira, para avaliar o percentual de queda de frutos e o diâmetro sutural médio dos frutos remanescentes. Genótipos bem enfolhados e cujos frutos apresentavam endocarpo endurecido, no momento da ocorrência da geada, foram tolerantes ao dano ocasionado pelo frio; frutos com diâmetro sutural inferior a 20 mm foram suscetíveis à geada, enquanto frutos com diâmetro sutural superior a 30 mm apresentaram boa tolerância, independentemente do genótipo avaliado.The aim of this work was to evaluate the fruit damage tolerance in different peach tree genotypes after natural freeze. The frost happened on September 5, 2006, and the minimum temperature, 1.5 meters over soil, was -1.06ºC. Twenty- eight peach tree genotypes, in different stages of development, were evaluated, in a completely random design, in three replication (plants and six branches by plants. Immediately after frost, we measured the number of fruits per branches, average fruit suture diameter, percentage of sprouts and percentage of twigs in formation. A second evaluation was accomplished fifteen days after the first one in order to assess the percentage of fruit drop and the average remaining fruit suture diameter. Genotypes

Water-deficit tolerant classification in mutant lines of indica rice

Directory of Open Access Journals (Sweden)

Suriyan Cha-um

2012-04-01

Full Text Available Water shortage is a major abiotic stress for crop production worldwide, limiting the productivity of crop species, especially in dry-land agricultural areas. This investigation aimed to classify the water-deficit tolerance in mutant rice (Oryza sativa L. spp. indica genotypes during the reproductive stage. Proline content in the flag leaf of mutant lines increased when plants were subjected to water deficit. Relative water content (RWC in the flag leaf of different mutant lines dropped in relation to water deficit stress. A decrease RWC was positively related to chlorophyll a degradation. Chlorophyll a , chlorophyll b , total chlorophyll , total carotenoids , maximum quantum yield of PSII , stomatal conductance , transpiration rate and water use efficiency in mutant lines grown under water deficit conditions declined in comparison to the well-watered, leading to a reduction in net-photosynthetic rate. In addition, when exposed to water deficit, panicle traits, including panicle length and fertile grains were dropped. The biochemical and physiological data were subjected to classify the water deficit tolerance. NSG19 (positive control and DD14 were identified as water deficit tolerant, and AA11, AA12, AA16, BB13, BB16, CC12, CC15, EE12, FF15, FF17, G11 and IR20 (negative control as water deficit sensitive, using Ward's method.

Lactose tolerance tests

Science.gov (United States)

Hydrogen breath test for lactose tolerance ... Two common methods include: Lactose tolerance blood test Hydrogen breath test The hydrogen breath test is the preferred method. It measures the amount of hydrogen ...

Levocabastine eye drops are effective and well tolerated for the treatment of allergic conjunctivitis in children

Directory of Open Access Journals (Sweden)

Brunello Wüthrich

1995-01-01

Full Text Available This open-label, prospective, multicentre, 4-week trial was undertaken to assess the efficacy and tolerability of twice daily levocabastine eye drops (0.5 mg/ml, with sodium cromoglycate nasal spray for the relief of concurrent nasal symptoms if required, in a total of 233 children with seasonal allergic conjunctivitis. No correlation between efficacy, tolerability and age was found. Investigator assessments revealed that the total severity of ocular symptoms decreased by 84 ± 34% in patients < 12 years and 85 ± 30% in those ≥ 12 years, with corresponding reductions in the total severity of ocular findings of 84% in both patient groups over the 4-week treatment period. Global assessments of therapeutic efficacy revealed the effect of therapy on ocular symptoms to be excellent or good in 81% of patients < 12 years and 82% of those ≥ 12 years after 2 weeks of treatment, with corresponding values at the end of the trial of 88% and 82% in the two groups, respectively. Treatment tolerability was considered to be excellent or good by 94% of patients overall. Application site reactions were the most common adverse event associated with ocular levocabastine, occurring in 13% of patients < 12 years and 9% of those ≥ 12 years. Twice daily levocabastine eye drops therefore appear to be effective and well tolerated for the treatment of seasonal allergic conjunctivitis in children.

Evaluation of Drought Tolerance in 16 Genotypes of Safflower(Carthamus tinctoriusL

Directory of Open Access Journals (Sweden)

s.M Azimzadeh

2011-02-01

Full Text Available Abstract In order to study drought tolerance of 16 genotypes of safflower an experiment was conducted in Research Farm of Shirvan Islamic Azad University during 2005 –2006 growing season. The experiment was performed as randomized complete block design with 4 replications in two separate irrigated and rainfed conditions. The seed rate was 20 seed per square meter, hand planted in each plot. During growing season some agronomic traits including number of grains per heads, grain yield of total head per plant, TKW and grain yield per hectare were recorded. To select drought tolerant genotypes 4 methods including stress tolerance index, stress susceptibility index, cell membrane stability and relative water content were applied. The results showed that two genotypes of LRV-51-51 and CW74 had the highest drought tolerance index and the lowest drought susceptibility index compared with the other genotypes. Grain yield of these two genotypes was 1520 and 1452 kg/ha, respectively which were more than other genotypes. According to these traits the genotypes LRV-51-51 and CW74 are recommended to plant in dry regions with low annual rainfall. Keywords: Safflower, Drought tolerance index, Drought susceptibility index, Yield

Introduction of transplantation tolerance after total lymphoid irradiation: cellular mechanisms

International Nuclear Information System (INIS)

Strober, S.; King, D.P.; Gottlieb, M.; Hoppe, R.T.; Kaplan, H.S.

1981-01-01

High-dose fractionated total lymphoid irradiation (TLI) is a safe, routine regimen used to treat patients with lymphoid malignancies. Although few side effects are associated with the regimen, a profound suppression of cell-mediated immunity is observed for several years after therapy, as judged by both in vivo and in vitro assays. A profound immunosuppression has also been observed in mice and rats given TLI. Recently, we have achieved similar results using TLI in nonmatched bone marrow transplantation in outbred dogs. The experimental work in animals and underlying cellular mechanisms are reviewed here

Site Suitability Analysis for Dissemination of Salt-tolerant Rice Varieties in Southern Bangladesh

Science.gov (United States)

Sinha, D. D.; Singh, A. N.; Singh, U. S.

2014-11-01

Bangladesh is a country of 14.4 million ha geographical area and has a population density of more than 1100 persons per sq. km. Rice is the staple food crop, growing on about 72 % of the total cultivated land and continues to be the most important crop for food security of the country. A project "Sustainable Rice Seed Production and Delivery Systems for Southern Bangladesh" has been executed by the International Rice Research Institute (IRRI) in twenty southern districts of Bangladesh. These districts grow rice in about 2.9 million ha out of the country's total rice area of 11.3 million ha. The project aims at contributing to the Government of Bangladesh's efforts in improving national and household food security through enhanced and sustained productivity by using salinity-, submergence- and drought- tolerant and high yielding rice varieties. Out of the 20 project districts, 12 coastal districts are affected by the problem of soil salinity. The salt-affected area in Bangladesh has increased from about 0.83 million ha in 1973 to 1.02 million ha in 2000, and 1.05 million ha in 2009 due to the influence of cyclonic storms like "Sidr", "Laila" and others, leading to salt water intrusion in croplands. Three salinity-tolerant rice varieties have recently been bred by IRRI and field tested and released by the Bangladesh Rice Research Institute (BRRI) and Bangladesh Institute of Nuclear Agriculture (BINA). These varieties are BRRI dhan- 47 and Bina dhan-8 and - 10. However, they can tolerate soil salinity level up to EC 8-10 dSm-1, whereas the EC of soils in several areas are much higher. Therefore, a large scale dissemination of these varieties can be done only when a site suitability analysis of the area is carried out. The present study was taken up with the objective of preparing the site suitability of the salt-tolerant varieties for the salinity-affected districts of southern Bangladesh. Soil salinity map prepared by Soil Resources Development Institute of

Fault-tolerant computing systems

International Nuclear Information System (INIS)

Dal Cin, M.; Hohl, W.

1991-01-01

Tests, Diagnosis and Fault Treatment were chosen as the guiding themes of the conference. However, the scope of the conference included reliability, availability, safety and security issues in software and hardware systems as well. The sessions were organized for the conference which was completed by an industrial presentation: Keynote Address, Reconfiguration and Recover, System Level Diagnosis, Voting and Agreement, Testing, Fault-Tolerant Circuits, Array Testing, Modelling, Applied Fault Tolerance, Fault-Tolerant Arrays and Systems, Interconnection Networks, Fault-Tolerant Software. One paper has been indexed separately in the database. (orig./HP)

Intolerant tolerance.

Science.gov (United States)

Khushf, G

1994-04-01

The Hyde Amendment and Roman Catholic attempts to put restrictions on Title X funding have been criticized for being intolerant. However, such criticism fails to appreciate that there are two competing notions of tolerance, one focusing on the limits of state force and accepting pluralism as unavoidable, and the other focusing on the limits of knowledge and advancing pluralism as a good. These two types of tolerance, illustrated in the writings of John Locke and J.S. Mill, each involve an intolerance. In a pluralistic context where the free exercise of religion is respected, John Locke's account of tolerance is preferable. However, it (in a reconstructed form) leads to a minimal state. Positive entitlements to benefits like artificial contraception or nontherapeutic abortions can legitimately be resisted, because an intolerance has already been shown with respect to those that consider the benefit immoral, since their resources have been coopted by taxation to advance an end that is contrary to their own. There is a sliding scale from tolerance (viewed as forbearance) to the affirmation of communal integrity, and this scale maps on to the continuum from negative to positive rights.

Changes in bacillus thuringiensis tolerance levels due to hybridization of Bt-tolerant and susceptible silkworm populations

International Nuclear Information System (INIS)

Begumad, H.A.; Hassana, E.; Dingleb, J.; Alshehic, A.A.

2012-01-01

Males and females of a Bt-tolerant mulberry silkworm (Bombyx mori L.) population were crossed with females and males of a Bt-susceptible population, to produce Bt-tolerant silkworm hybrids, and to determine the expression of the Bt-tolerance pattern in the F 1 hybrids. It was observed that when a Bt-tolerant (42% larval mortality) female (BtT ) silkworm was crossed with a Bt-susceptible (85% larval mortality) male (BtS ), the resultant F 1 offspring showed lower levels of Bt-tolerance (87% larval mortality). On the other hand, when a Bt-tolerant male (BtT ) was crossed with a Bt-susceptible female (BtS ), the F 1 hybrid showed higher levels of Bt-tolerance (35% larval mortality) characteristic. The probit statistics showed that both hybrids expressed Bt-tolerance or susceptible levels similar to their male parents. These different patterns of Bt-tolerance in F 1 hybrids might be due to the transferring of a Bt-tolerant gene, from the parents to offspring, through the homozygotic male (ZZ) silkworm. (author)

Tolerability of ambulatory blood pressure monitoring (ABPM) in cognitively impaired elderly.

Science.gov (United States)

Nesti, Nicola; Pieraccioli, Mariachiara; Mossello, Enrico; Sgrilli, Federica; Bulgaresi, Matteo; Crescioli, Elena; Biagini, Francesco; Caleri, Veronica; Tonon, Elisabetta; Cantini, Claudia; Biagini, Carlo A; Marchionni, Niccolò; Ungar, Andrea

2014-12-01

Recent guidelines have widened clinical indications for out-of-office blood pressure measurement, including home blood pressure monitoring and ambulatory blood pressure monitoring (ABPM), suggesting the latter as recommended method in cognitively impaired patients. There is, however, a widespread belief that ABPM could be poorly tolerated in dementia, often leading to withdraw from its use in these patients. To assess the actual tolerability of ABPM in a group of cognitively impaired elderly, affected by dementia or mild cognitive impairment (MCI). We evaluated 176 patients aged 65 + years, recruited in two different memory clinics, with a Mini Mental State Examination (MMSE) between 10 and 27. Behavioral and psychological symptoms were assessed with Neuropsychiatric Inventory (NPI). A patient was considered tolerant if able to keep the device on continuously for 24 h. The minimum number of correct measurements required was 70% of the predicted total number. 16% of patients wore the device for less than 24 h. Dividing the study population in tertiles of MMSE performance, 29% failed to tolerate the device in the lowest, 12% in the middle and 7% in the highest tertile (p ABPM proved a generally well-tolerated technique even in cognitively impaired elderly. Only a minority of subjects with poorer cognitive performances and greater behavioral symptoms did not tolerate the monitoring. Among most patients who failed to achieve the minimum number of measurements needed, the number of valid measurements was very close to the minimum required.

In vitro selection of induced mutants to salt-tolerance: Inducible gene regulation for salt tolerance

Energy Technology Data Exchange (ETDEWEB)

Winicov, I [Department of Microbiology and Biochemistry, Univ. of Nevada-Reno, Reno, NV (United States)

1997-07-01

A selection protocol to obtain salt tolerant calli, followed by regeneration and progeny-test of the regenerated plants for salt tolerance in rice was investigated. Callus cultures were initiated from salt-sensitive US elite rice lines and cv. `Pokkali`. Salt-tolerant cell lines were selected from these by a single step selection procedure. The selected salt-tolerant lines grew well on medium with {+-} 0.5% or 1% NaCl, while the parent lines occasionally survived, but did not grow at these salt concentrations. Plants were regenerated from these cell lines through different passages on medium containing salt. Seed was collected from the regenerated plants and salt tolerance of R2 seedlings was compared with those regenerated without salt selection. Salt-tolerance was measured by survival and productive growth of newly germinated seedlings in Hoagland solution with 0.3% and 0.5% NaCl for 4 weeks. Heritable improvement in salt tolerance was obtained in R2 seedlings from one plant regenerated after 5 months selection. Survival and growth of these seedlings was equivalent to that from `Pokkali` seedlings. These results show that cellular tolerance can provide salt-tolerance in rice plants. (author). 6 refs, 2 tabs.

In vitro selection of induced mutants to salt-tolerance: Inducible gene regulation for salt tolerance

International Nuclear Information System (INIS)

Winicov, I.

1997-01-01

A selection protocol to obtain salt tolerant calli, followed by regeneration and progeny-test of the regenerated plants for salt tolerance in rice was investigated. Callus cultures were initiated from salt-sensitive US elite rice lines and cv. 'Pokkali'. Salt-tolerant cell lines were selected from these by a single step selection procedure. The selected salt-tolerant lines grew well on medium with ± 0.5% or 1% NaCl, while the parent lines occasionally survived, but did not grow at these salt concentrations. Plants were regenerated from these cell lines through different passages on medium containing salt. Seed was collected from the regenerated plants and salt tolerance of R2 seedlings was compared with those regenerated without salt selection. Salt-tolerance was measured by survival and productive growth of newly germinated seedlings in Hoagland solution with 0.3% and 0.5% NaCl for 4 weeks. Heritable improvement in salt tolerance was obtained in R2 seedlings from one plant regenerated after 5 months selection. Survival and growth of these seedlings was equivalent to that from 'Pokkali' seedlings. These results show that cellular tolerance can provide salt-tolerance in rice plants. (author). 6 refs, 2 tabs

Genome-wide association study of salt tolerance at the seed germination stage in rice.

Science.gov (United States)

Shi, Yingyao; Gao, Lingling; Wu, Zhichao; Zhang, Xiaojing; Wang, Mingming; Zhang, Congshun; Zhang, Fan; Zhou, Yongli; Li, Zhikang

2017-05-30

Improving the salt tolerance of direct-seeding rice at the seed germination stage is a major breeding goal in many Asian rice-growing countries, where seedlings must often establish in soils with a high salt content. Thus, it is important to understand the genetic mechanisms of salt tolerance in rice and to screen for germplasm with salt tolerance at the seed germination stage. Here, we investigated seven seed germination-related traits under control and salt-stress conditions and conducted a genome-wide association study based on the re-sequencing of 478 diverse rice accessions. The analysis used a mixed linear model and was based on 6,361,920 single nucleotide polymorphisms in 478 rice accessions grouped into whole, indica, and non-indica panels. Eleven loci containing 22 significant salt tolerance-associated single nucleotide polymorphisms were identified based on the stress-susceptibility indices (SSIs) of vigor index (VI) and mean germination time (MGT). From the SSI of VI, six major loci were identified, explaining 20.2% of the phenotypic variation. From the SSI of MGT, five major loci were detected, explaining 26.4% of the phenotypic variation. Of these, seven loci on chromosomes 1, 5, 6, 11, and 12 were close to six previously identified quantitative gene loci/genes related to tolerance to salinity or other abiotic stresses. The strongest association region for the SSI of MGT was identified in a ~ 13.3 kb interval (15450039-15,463,330) on chromosome 1, near salt-tolerance quantitative trait loci controlling the Na + : K + ratio, total Na + uptake, and total K + concentration. The strongest association region for the SSI of VI was detected in a ~ 164.2 kb interval (526662-690,854) on chromosome 2 harboring two nitrate transporter family genes (OsNRT2.1 and OsNRT2.2), which affect gene expression under salt stress. The haplotype analysis indicated that OsNRT2.2 was associated with subpopulation differentiation and its minor/rare tolerant haplotype was

Susceptibility and tolerance of rice crop to salt threat: Physiological and metabolic inspections.

Directory of Open Access Journals (Sweden)

Nyuk Ling Ma

Full Text Available Salinity threat is estimated to reduce global rice production by 50%. Comprehensive analysis of the physiological and metabolite changes in rice plants from salinity stress (i.e. tolerant versus susceptible plants is important to combat higher salinity conditions. In this study, we screened a total of 92 genotypes and selected the most salinity tolerant line (SS1-14 and most susceptible line (SS2-18 to conduct comparative physiological and metabolome inspections. We demonstrated that the tolerant line managed to maintain their water and chlorophyll content with lower incidence of sodium ion accumulation. We also examined the antioxidant activities of these lines: production of ascorbate peroxidase (APX and catalase (CAT were significantly higher in the sensitive line while superoxide dismutase (SOD was higher in the tolerant line. Partial least squares discriminant analysis (PLS-DA score plots show significantly different response for both lines after the exposure to salinity stress. In the tolerant line, there was an upregulation of non-polar metabolites and production of sucrose, GABA and acetic acid, suggesting an important role in salinity adaptation. In contrast, glutamine and putrescine were noticeably high in the susceptible rice. Coordination of different strategies in tolerant and susceptible lines show that they responded differently after exposure to salt stress. These findings can assist crop development in terms of developing tolerance mechanisms for rice crops.

Om tolerance

DEFF Research Database (Denmark)

Huggler, Jørgen

2007-01-01

Begrebet tolerance og dets betydninger diskuteres med henblik på en tydeliggørelse af begrebets forbindelse med stat, religion, ytringsfrihed, skeptisk erkendelsesteori, antropologi og pædagogik.......Begrebet tolerance og dets betydninger diskuteres med henblik på en tydeliggørelse af begrebets forbindelse med stat, religion, ytringsfrihed, skeptisk erkendelsesteori, antropologi og pædagogik....

Selection and identification of air pollution-tolerant plants by air ...

African Journals Online (AJOL)

The study examined air pollution tolerance index (APTI) of ten tree species in urban parks of Isfahan, Iran. Four physiological and biochemical parameters namely: leaf relative water content of leaf (RWC), ascorbic acid content, total leaf chlorophyll (TCH) and leaf extract pH were used to determined the APTI. The results ...

Provisional safety analyses for SGT stage 2 -- Models, codes and general modelling approach

International Nuclear Information System (INIS)

2014-12-01

In the framework of the provisional safety analyses for Stage 2 of the Sectoral Plan for Deep Geological Repositories (SGT), deterministic modelling of radionuclide release from the barrier system along the groundwater pathway during the post-closure period of a deep geological repository is carried out. The calculated radionuclide release rates are interpreted as annual effective dose for an individual and assessed against the regulatory protection criterion 1 of 0.1 mSv per year. These steps are referred to as dose calculations. Furthermore, from the results of the dose calculations so-called characteristic dose intervals are determined, which provide input to the safety-related comparison of the geological siting regions in SGT Stage 2. Finally, the results of the dose calculations are also used to illustrate and to evaluate the post-closure performance of the barrier systems under consideration. The principal objective of this report is to describe comprehensively the technical aspects of the dose calculations. These aspects comprise: · the generic conceptual models of radionuclide release from the solid waste forms, of radionuclide transport through the system of engineered and geological barriers, of radionuclide transfer in the biosphere, as well as of the potential radiation exposure of the population, · the mathematical models for the explicitly considered release and transport processes, as well as for the radiation exposure pathways that are included, · the implementation of the mathematical models in numerical codes, including an overview of these codes and the most relevant verification steps, · the general modelling approach when using the codes, in particular the generic assumptions needed to model the near field and the geosphere, along with some numerical details, · a description of the work flow related to the execution of the calculations and of the software tools that are used to facilitate the modelling process, and · an overview of the

Provisional safety analyses for SGT stage 2 -- Models, codes and general modelling approach

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-12-15

In the framework of the provisional safety analyses for Stage 2 of the Sectoral Plan for Deep Geological Repositories (SGT), deterministic modelling of radionuclide release from the barrier system along the groundwater pathway during the post-closure period of a deep geological repository is carried out. The calculated radionuclide release rates are interpreted as annual effective dose for an individual and assessed against the regulatory protection criterion 1 of 0.1 mSv per year. These steps are referred to as dose calculations. Furthermore, from the results of the dose calculations so-called characteristic dose intervals are determined, which provide input to the safety-related comparison of the geological siting regions in SGT Stage 2. Finally, the results of the dose calculations are also used to illustrate and to evaluate the post-closure performance of the barrier systems under consideration. The principal objective of this report is to describe comprehensively the technical aspects of the dose calculations. These aspects comprise: · the generic conceptual models of radionuclide release from the solid waste forms, of radionuclide transport through the system of engineered and geological barriers, of radionuclide transfer in the biosphere, as well as of the potential radiation exposure of the population, · the mathematical models for the explicitly considered release and transport processes, as well as for the radiation exposure pathways that are included, · the implementation of the mathematical models in numerical codes, including an overview of these codes and the most relevant verification steps, · the general modelling approach when using the codes, in particular the generic assumptions needed to model the near field and the geosphere, along with some numerical details, · a description of the work flow related to the execution of the calculations and of the software tools that are used to facilitate the modelling process, and · an overview of the

The peer effect on pain tolerance.

Science.gov (United States)

Engebretsen, Solveig; Frigessi, Arnoldo; Engø-Monsen, Kenth; Furberg, Anne-Sofie; Stubhaug, Audun; de Blasio, Birgitte Freiesleben; Nielsen, Christopher Sivert

2018-05-19

Twin studies have found that approximately half of the variance in pain tolerance can be explained by genetic factors, while shared family environment has a negligible effect. Hence, a large proportion of the variance in pain tolerance is explained by the (non-shared) unique environment. The social environment beyond the family is a potential candidate for explaining some of the variance in pain tolerance. Numerous individual traits have previously shown to be associated with friendship ties. In this study, we investigate whether pain tolerance is associated with friendship ties. We study the friendship effect on pain tolerance by considering data from the Tromsø Study: Fit Futures I, which contains pain tolerance measurements and social network information for adolescents attending first year of upper secondary school in the Tromsø area in Northern Norway. Pain tolerance was measured with the cold-pressor test (primary outcome), contact heat and pressure algometry. We analyse the data by using statistical methods from social network analysis. Specifically, we compute pairwise correlations in pain tolerance among friends. We also fit network autocorrelation models to the data, where the pain tolerance of an individual is explained by (among other factors) the average pain tolerance of the individual's friends. We find a significant and positive relationship between the pain tolerance of an individual and the pain tolerance of their friends. The estimated effect is that for every 1 s increase in friends' average cold-pressor tolerance time, the expected cold-pressor pain tolerance of the individual increases by 0.21 s (p-value: 0.0049, sample size n=997). This estimated effect is controlled for sex. The friendship effect remains significant when controlling for potential confounders such as lifestyle factors and test sequence among the students. Further investigating the role of sex on this friendship effect, we only find a significant peer effect of male friends

Dietary intake of aluminum in a Spanish population (Canary Islands).

Science.gov (United States)

González-Weller, Dailos; Gutiérrez, Angel José; Rubio, Carmen; Revert, Consuelo; Hardisson, Arturo

2010-10-13

The aim of this study was to analyze the aluminum content in foods and beverages most commonly consumed by the Canary Island population to determine the dietary intake of this metal throughout the Canary Islands as a whole and in each of the seven islands (Gran Canaria, Lanzarote, Fuerteventura, Tenerife, La Palma, La Gomera, and El Hierro). Four hundred and forty samples were analyzed by ICP-OES. Estimated total intake of aluminum for the Canary population was 10.171 mg/day, slightly higher than the provisional tolerable weekly intake (PTWI; 10 mg/day for a person weighing 70 kg). Aluminum intake by age and sex of the Canary Island population was also determined and compared values from other populations, both national and international.

Fault-tolerant architecture: Evaluation methodology

International Nuclear Information System (INIS)

Battle, R.E.; Kisner, R.A.

1992-08-01

The design and reliability of four fault-tolerant architectures that may be used in nuclear power plant control systems were evaluated. Two architectures are variations of triple-modular-redundant (TMR) systems, and two are variations of dual redundant systems. The evaluation includes a review of methods of implementing fault-tolerant control, the importance of automatic recovery from failures, methods of self-testing diagnostics, block diagrams of typical fault-tolerant controllers, review of fault-tolerant controllers operating in nuclear power plants, and fault tree reliability analyses of fault-tolerant systems

Developing a provisional and national renal disease registry for Iran

Directory of Open Access Journals (Sweden)

Sima Ajami

2015-01-01

Full Text Available Background: Disease registry is a database that includes information about people suffering a special kind of disease. The aim of this study was to first identify and compare the National Renal Disease Registry (NRDR characteristics in some countries with Iran; and second, develop a provisional and NRDR for Iran. Materials and Methods: Retrieval of data of the NRDR was performed by scholars responsible in related agencies, including the Ministry of Health and Medical Education, Renal Disease charity, and data registries in the United States, United Kingdom, Malaysia, and Iran. This research was applied, and the study was descriptive-comparative. The study population consisted of the NRDR in selected countries in which data were collected by forms that were designed according to the study objectives. Sources of data were researchers, articles, books, journals, databases, websites, related documents, and people who are active in this regard, and related agencies, including the Ministry of Health and Medical Education, and patient support charity. The researchers collected data for each country based on the study objectives and then put them in comparative tables. Data were analyzed by descriptive, comparative, and theoretical methods. Results: Most of the renal transplant teams report their own results as a single center experiences. America and Britain have a preeminent national registry of renal disease compared to other countries. Conclusion: Given that control, prevention, and treatment of chronic renal diseases incur high expenses and the disease is one of leading mortality factors in Iran and across the world and since national registry system for chronic renal diseases can provide better tools and strategies to manage and evaluate patients′ characteristics as well as risk factors which eventually leads to making better decisions.

Chronic ethanol or nicotine treatment results in partial cross-tolerance between these agents.

Science.gov (United States)

Burch, J B; de Fiebre, C M; Marks, M J; Collins, A C

1988-01-01

Female DBA/2Ibg mice were treated chronically (21 days) with ethanol- or dextrin-containing liquid diets or infused chronically with nicotine (8 mg/kg/h) or saline for 10 days. The responses of these animals to challenge doses of ethanol (2.5 g/kg) or nicotine (1 or 2 mg/kg) were measured using a test battery consisting of respiration rate, acoustic startle response, Y-maze crosses and rears, heart rate and body temperature. Chronic ethanol-treated animals were tolerant to the effects elicited by a challenge dose of ethanol on four of the six measures and were cross-tolerant to nicotine's effects on the acoustic startle test. Chronic nicotine-treated animals were tolerant to nicotine's effects on five of the six measures and cross-tolerant to ethanol's effects on heart rate and body temperature. Thus, partial cross-tolerance between ethanol and nicotine exists. Chronic nicotine treatment resulted in significant increases in L-[3H]-nicotine binding in six of seven brain regions and in alpha-[125I]-bungarotoxin binding in three of seven brain regions. Chronic ethanol treatment failed to alter the binding of either ligand. Therefore, the cross-tolerance that develops between ethanol and nicotine is not totally dependent on alterations in the number of brain nicotinic receptors.

Dual specific oral tolerance induction using interferon gamma for IgE-mediated anaphylactic food allergy and the dissociation of local skin allergy and systemic oral allergy: tolerance or desensitization?

Science.gov (United States)

Noh, G; Jang, E H

2014-01-01

Specific oral tolerance induction (SOTI) for IgE-mediated food allergy (IFA) can be successfully achieved using interfero gamma (classic SOTI). In this study, a tolerable dose was introduced during tolerance induction with interferon gamma (dual SOTI), and its effectiveness was evaluated. The study population comprised 25 IFA patients. Blood samples were taken for analysis, including complete blood count with differential counts of eosinophils, serum total IgE levels, and specific IgE for allergenic foods. Skin prick tests were conducted with the allergens. Oral food challenges were performed to diagnose IFA. Ten patients received dual SOTI, 5 received classic SOTI, 5 received SOTI without interferon gamma (original SOTI), and 5 were not treated (controls). Patients treated with dual SOTI and classic SOTI using interferon gamma became tolerant to the allergenic food. The tolerable dose was introduced successfully in dual SOTI. It was difficult to proceed with the same dosing protocol used for classic SOTI in cases treated with original SOTI. Following dual SOTI, the systemic reaction to oral intake subsided, but the local skin reaction to contact with the allergenic food persisted. Dual SOTI is an improved protocol for SOTI using interferon gamma for IFA.The local skin reaction and systemic reaction to oral intake were dissociated following dual SOTI. In cases of food allergy, tolerance appears to result from desensitization to allergens.

Numerical taxonomy of heavy metal-tolerant bacteria isolated from an estuary

Energy Technology Data Exchange (ETDEWEB)

Austin, B.; Allen, D.A.; Mills, A.L.; Colwell, R.R.

1977-01-01

A total of 230 strains of metal-tolerant bacteria from water and sediment samples collected in Chesapeake Bay were isolated on medium containing cobalt, lead, mercury, or molybdenum. In addition, a set of 71 cultures were simultaneously isolated on glucose tryptone yeast extract agar medium without metals. Twenty-three reference strains were also included in the numerical taxonomy study of these bacteria, bringing the grand total of strains examined to 324. All strains were examined for 112 biochemical, cultural, morphological, and physiological characters. The taxonomic data obtained were analyzed by computer and the simple matching (S/sub SM/) and Jaccard (S/sub J) coefficients were calculated. Clustering achieved by unweighted average linkage is presented and, from sorted similarity matrices and dendrograms, 294 strains, i.e., 97% of the total, were recovered in 12 phenetic groups defined at the 75 to 80% similarity level. Among the strains there were nine phena presumptively identified as Bacillus, Erwinia, Mycobacterium, Pseudomonas, and coryneforms. From the results of the taxonomic study, it is concluded that metal tolerance in estuarine water and sediment bacteria occurs among a restricted range of taxa distributed throughout the estuarine environment. 61 references, 1 figure, 6 tables.

Duration of in vivo endotoxin tolerance in horses.

Science.gov (United States)

Holcombe, Susan J; Jacobs, Carrie C; Cook, Vanessa L; Gandy, Jeffery C; Hauptman, Joseph G; Sordillo, Lorraine M

2016-05-01

Endotoxemia models are used to study mechanisms and treatments of early sepsis. Repeated endotoxin exposures induce periods of endotoxin tolerance, characterized by diminished proinflammatory responses to lipopolysaccharide (LPS) and modulated production of proinflammatory cytokines. Repeated measure designs using equine endotoxemia models are rarely performed, despite the advantages associated with reduced variability, because the altered responsiveness would confound study results and because the duration of equine endotoxin tolerance is unknown. We determined the interval of endotoxin tolerance, in vivo, in horses based on physical, clinicopathologic, and proinflammatory gene expression responses to repeated endotoxin exposures. Six horses received 30 ng/kg LPS in saline infused over 30 min. Behavior pain scores, physical examination parameters, and blood for complete blood count and proinflammatory gene expression were obtained at predetermined intervals for 24h. Horses received a total of 3 endotoxin exposures. The first exposure was LPS 1, followed 7 days later by LPS 7 or 14-21 days later by LPS 14-21. Lipopolysaccharide exposures were allocated in a randomized, crossover design. Lipopolysaccharide produced clinical and clinicopathologic signs of endotoxemia and increased expression of tumor necrosis factor alpha (TNFα), interleukin (IL)-6 and IL-8, PHorses exhibited evidence of endotoxin tolerance following LPS 7 but not following LPS 14-21. Horses had significantly lower pain scores, heart rates, respiratory rates and duration of fever, after LPS 7 compared to LPS 1 and LPS 14-21, Phorses after LPS 7, P=0.05. Clinical parameters and TNFα gene expression were similar or slightly increased in horses following LPS 14-21 compared to measurements made in horses following LPS 1, suggesting that endotoxin tolerance had subsided. A minimum of 3 weeks between experiments is warranted if repeated measures designs are used to assess in vivo response to endotoxin in

Tolerating Correlated Failures for Generalized Cartesian Distributions via Bipartite Matching

International Nuclear Information System (INIS)

Ali, Nawab; Krishnamoorthy, Sriram; Halappanavar, Mahantesh; Daily, Jeffrey A.

2011-01-01

Faults are expected to play an increasingly important role in how algorithms and applications are designed to run on future extreme-scale systems. A key ingredient of any approach to fault tolerance is effective support for fault tolerant data storage. A typical application execution consists of phases in which certain data structures are modified while others are read-only. Often, read-only data structures constitute a large fraction of total memory consumed. Fault tolerance for read-only data can be ensured through the use of checksums or parities, without resorting to expensive in-memory duplication or checkpointing to secondary storage. In this paper, we present a graph-matching approach to compute and store parity data for read-only matrices that are compatible with fault tolerant linear algebra (FTLA). Typical approaches only support blocked data distributions with each process holding one block with the parity located on additional processes. The matrices are assumed to be blocked by a cartesian grid with each block assigned to a process. We consider a generalized distribution in which each process can be assigned arbitrary blocks. We also account for the fact that multiple processes might be part of the same failure unit, say an SMP node. The flexibility enabled by our novel application of graph matching extends fault tolerance support to data distributions beyond those supported by prior work. We evaluate the matching implementations and cost to compute the parity and recover lost data, demonstrating the low overhead incurred by our approach.

A molecular, genetic and physiological analysis of plant aluminum tolerance (abstract)

International Nuclear Information System (INIS)

Pineros, M.

2005-01-01

Aluminum (Al) toxicity is an important agronomic trait, limiting crop production on acid soils that comprise up to 50% of the world's potentially arable lands. A significant genetic variation in Al tolerance exists in both crop plants and Arabidopsis. The exploitation of this genetic variation to breed crops with increased Al tolerance has been a productive and active area of research, however, the underlying molecular, genetic and physiological bases are still not well understood. Only very recently was the first Al tolerance gene, ALMT1, isolated in wheat and shown to be a novel Al-activated malate transporter. Work in our laboratory has focused on using integrated genomic (gene and protein expression profiling), molecular genetic and physiological approaches to identify novel Al tolerance genes and the physiological mechanisms they control in the cereal crops maize and sorghum, and also in arabidopsis. In sorghum we had previously shown that Al tolerance is the result of a single locus, Alt/sub SB/ which maps to the top of sorghum chromosome 3 in a region totally distinct from where the major Al tolerance maps in wheat and other related members of the Triticeae. Very recently, we have used map-based cloning techniques in sorghum to clone Alt/sub SB/ and have found it is a novel Al tolerance gene. Here we will present a molecular characterization of the Alt/sub SB/ gene and also the physiological mechanism of sorghum Al tolerance it controls. In arabidopsis, we have previously shown that Al tolerance is a quantitative trait and have identified two major Al tolerance QTL on chromosomes 1 and 5. These genes function to confer tolerance via Al via activated root malate release. We found that a member of the arabidopsis gene family that is a close homolog to wheat ALMT1 maps near the largest tolerance QTL on chromosome 1 and have also found this gene encodes the Al-activated malate transport involved in arabidopsis Al tolerance. However, we have clear molecular

Recognition and Toleration

DEFF Research Database (Denmark)

Lægaard, Sune

2010-01-01

Recognition and toleration are ways of relating to the diversity characteristic of multicultural societies. The article concerns the possible meanings of toleration and recognition, and the conflict that is often claimed to exist between these two approaches to diversity. Different forms or inter...

Enzymatic regulation of organic acid metabolism in an alkali-tolerant ...

African Journals Online (AJOL)

Chloris virgata, an alkali-tolerant halophyte, was chosen as the test material for our research. The seedlings of C. virgata were treated with varying salt and alkali stress. First, the composition and content of organic acids in shoots were analyzed and the results indicated that there was not only a significant increase in total ...

Effect of different polishing methods on surface roughness of provisional prosthetic materials.

Science.gov (United States)

Tupinambá, Ívian Verena Maia; Giampá, Priscila Couy Corrêa; Rocha, Isadora Almeida Rios; Lima, Emilena Maria Castor Xisto

2018-01-01

To evaluate the surface roughness of bis-acrylic and acrylic resins submitted to different methods of polishing. Fifty samples of each provisional restorative material (Structur 2, Protemp 4, Duralay, and Dencrilay) were fabricated (10 mm × 2 mm) and divided into five groups ( n = 10): (1) positive control group - polyester strip; (2) negative control - unpolished; (3) abrasive tips (Exa-Technique-Edenta); (4) goat hair brush and diamond polishing paste; and (5) silicone tips (Enhance). Each material was mixed and polymerized according to manufacturer's instructions. The parameter evaluated was the arithmetic mean of the surface roughness (Ra) determined using the rugosimeter SJ 301 (Mitutoyo, Japan). The data were analyzed with two-way analysis of variance ( post hoc Tukey's test) ( P < 0.05). The lowest surface roughness values (0,22-0,90 μm) were observed in the Group 4 - goat hair brush and diamond paste, while the highest values (1,17-1,44 μm) were found in the Group 5 - silicone tips (enhance), with statistically significant differences between them, except for Dencrilay acrylic resin. There was statistically significant difference between bis-acrylic and acrylic resins in the Groups 1, 2, and 4. Within the limitations of this study, it was concluded that the most effective polishing system was the goat hair brush with diamond paste for both bis-acrylic and acrylic resins. The bis-acrylic resins exhibited significantly smoother surfaces than the acrylic resins.

Screening of purslane (Portulaca oleracea L.) accessions for high salt tolerance.

Science.gov (United States)

Alam, Md Amirul; Juraimi, Abdul Shukor; Rafii, M Y; Hamid, Azizah Abdul; Aslani, Farzad

2014-01-01

Purslane (Portulaca oleracea L.) is an herbaceous leafy vegetable crop, comparatively more salt-tolerant than any other vegetables with high antioxidants, minerals, and vitamins. Salt-tolerant crop variety development is of importance due to inadequate cultivable land and escalating salinity together with population pressure. In this view a total of 25 purslane accessions were initially selected from 45 collected purslane accessions based on better growth performance and subjected to 5 different salinity levels, that is, 0.0, 10.0, 20.0, 30.0, and 40.0 dS m(-1) NaCl. Plant height, number of leaves, number of flowers, and dry matter contents in salt treated purslane accessions were significantly reduced (P ≤ 0.05) and the enormity of reduction increased with increasing salinity stress. Based on dry matter yield reduction, among all 25 purslane accessions 2 accessions were graded as tolerant (Ac7 and Ac9), 6 accessions were moderately tolerant (Ac3, Ac5, Ac6, Ac10, Ac11, and Ac12), 5 accessions were moderately susceptible (Ac1, Ac2, Ac4, Ac8, and Ac13), and the remaining 12 accessions were susceptible to salinity stress and discarded from further study. The selected 13 purslane accessions could assist in the identification of superior genes for salt tolerance in purslane for improving its productivity and sustainable agricultural production.

Screening of Purslane (Portulaca oleracea L. Accessions for High Salt Tolerance

Directory of Open Access Journals (Sweden)

Md. Amirul Alam

2014-01-01

Full Text Available Purslane (Portulaca oleracea L. is an herbaceous leafy vegetable crop, comparatively more salt-tolerant than any other vegetables with high antioxidants, minerals, and vitamins. Salt-tolerant crop variety development is of importance due to inadequate cultivable land and escalating salinity together with population pressure. In this view a total of 25 purslane accessions were initially selected from 45 collected purslane accessions based on better growth performance and subjected to 5 different salinity levels, that is, 0.0, 10.0, 20.0, 30.0, and 40.0 dS m−1 NaCl. Plant height, number of leaves, number of flowers, and dry matter contents in salt treated purslane accessions were significantly reduced (P≤0.05 and the enormity of reduction increased with increasing salinity stress. Based on dry matter yield reduction, among all 25 purslane accessions 2 accessions were graded as tolerant (Ac7 and Ac9, 6 accessions were moderately tolerant (Ac3, Ac5, Ac6, Ac10, Ac11, and Ac12, 5 accessions were moderately susceptible (Ac1, Ac2, Ac4, Ac8, and Ac13, and the remaining 12 accessions were susceptible to salinity stress and discarded from further study. The selected 13 purslane accessions could assist in the identification of superior genes for salt tolerance in purslane for improving its productivity and sustainable agricultural production.

Arsenic tolerant Trichoderma sp. reduces arsenic induced stress in chickpea (Cicer arietinum).

Science.gov (United States)

Tripathi, Pratibha; Singh, Poonam C; Mishra, Aradhana; Srivastava, Suchi; Chauhan, Reshu; Awasthi, Surabhi; Mishra, Seema; Dwivedi, Sanjay; Tripathi, Preeti; Kalra, Alok; Tripathi, Rudra D; Nautiyal, Chandra S

2017-04-01

Toxic metalloids including arsenic (As) can neither be eliminated nor destroyed from environment; however, they can be converted from toxic to less/non-toxic forms. The form of As species and their concentration determines its toxicity in plants. Therefore, the microbe mediated biotransformation of As is crucial for its plant uptake and toxicity. In the present study the role of As tolerant Trichoderma in modulating As toxicity in chickpea plants was explored. Chickpea plants grown in arsenate spiked soil under green house conditions were inoculated with two plant growth promoting Trichoderma strains, M-35 (As tolerant) and PPLF-28 (As sensitive). Total As concentration in chickpea tissue was comparable in both the Trichoderma treatments, however, differences in levels of organic and inorganic As (iAs) species were observed. The shift in iAs to organic As species ratio in tolerant Trichoderma treatment correlated with enhanced plant growth and nutrient content. Arsenic stress amelioration in tolerant Trichoderma treatment was also evident through rhizospheric microbial community and anatomical studies of the stem morphology. Down regulation of abiotic stress responsive genes (MIPS, PGIP, CGG) in tolerant Trichoderma + As treatment as compared to As alone and sensitive Trichoderma + As treatment also revealed that tolerant strain enhanced the plant's potential to cope with As stress as compared to sensitive one. Considering the bioremediation and plant growth promotion potential, the tolerant Trichoderma may appear promising for its utilization in As affected fields for enhancing agricultural productivity. Copyright © 2017 Elsevier Ltd. All rights reserved.

Tolerance and immobilization of cobalt by some bacteria from ferromanganese crusts of the afanasiy Nikitin Seamounts

Digital Repository Service at National Institute of Oceanography (India)

Krishnan, K.P.; Fernandes, C.E.G.; Fernandes, S.O.; LokaBharathi, P.A.

be responsible for immobilizing the cobalt from the liquid phase. In the unamended medium, the tolerance and stimulation in total cell counts was similar to that in amended medium or sometimes greater. Total cell counts peaked at 100 Mu mol Co 1sup(-1...

Massive Sensor Array Fault Tolerance: Tolerance Mechanism and Fault Injection for Validation

Directory of Open Access Journals (Sweden)

Dugan Um

2010-01-01

Full Text Available As today's machines become increasingly complex in order to handle intricate tasks, the number of sensors must increase for intelligent operations. Given the large number of sensors, detecting, isolating, and then tolerating faulty sensors is especially important. In this paper, we propose fault tolerance architecture suitable for a massive sensor array often found in highly advanced systems such as autonomous robots. One example is the sensitive skin, a type of massive sensor array. The objective of the sensitive skin is autonomous guidance of machines in unknown environments, requiring elongated operations in a remote site. The entirety of such a system needs to be able to work remotely without human attendance for an extended period of time. To that end, we propose a fault-tolerant architecture whereby component and analytical redundancies are integrated cohesively for effective failure tolerance of a massive array type sensor or sensor system. In addition, we discuss the evaluation results of the proposed tolerance scheme by means of fault injection and validation analysis as a measure of system reliability and performance.

Radiological indices of drinking waters on the north part of the bulgarian black sea coast

International Nuclear Information System (INIS)

Todorov, P.T.; Rusev, R.; Chuturkova, R.

2005-01-01

Bulgaria is a country which is located in the Eastern Europe. A drinking water sources on the North part of Bulgarian Black Sea coast have different radiological indices. The sources of drinking water can be lakes, rivers, wells, dam lakes and so on. Property estimation of the contents of Uranium (Ur), Radium (Ra 226), and total Beta activity, shows that concentrations of investigated parameters vary around TDI (tolerable daily intake). To Uranium for example the TDI yields a guideline value are 2 μg/litre if a 60 kg adult consuming 2 litres of drinking water per day and the provisional guideline value of Uranium which shows the health significance in drinking waters is 0.002 mg/1. The situation with the full Beta activity and Radium concentrations is the same. All these qualitative and quantitative indices are close to the provisional guideline values, but in some cases it is higher than the limit concentrations. The full Beta activity is measured in Becquerel per litre and values are around 0.193+7-20% Bq/1. The Radium concentration takes the dimensions of Bq/1 and it is about 0.009 Bq/l. No matter of the source of drinking water, contents of radiological indices is a very important element of the health care control

Transcriptome alteration in a rice introgression line with enhanced alkali tolerance.

Science.gov (United States)

Zhang, Yunhong; Lin, Xiuyun; Ou, Xiufang; Hu, Lanjuan; Wang, Jinming; Yang, Chunwu; Wang, Shucai; Liu, Bao

2013-07-01

Alkali stress inhibits plant growth and development and thus limits crop productivity. To investigate the possible genetic basis of alkali tolerance in rice, we generated an introgressed rice line (K83) with significantly enhanced tolerance to alkali stress compared to its recipient parental cultivar (Jijing88). By using microarray analysis, we examined the global gene expression profiles of K83 and Jijing88, and found that more than 1200 genes were constitutively and differentially expressed in K83 in comparison to Jijing88 with 572 genes up- and 654 down-regulated. Upon alkali treatment, a total of 347 genes were found up- and 156 down-regulated in K83 compared to 591 and 187, respectively, in Jijing88. Among the up-regulated genes in both K83 and Jijing88, only 34 were constitutively up-regulated in K83, suggesting that both the constitutive differentially expressed genes in K83 and those induced by alkali treatment are most likely responsible for enhanced alkali tolerance. A gene ontology analysis based on all annotated, differentially expressed genes revealed that genes with expression alterations were enriched in pathways involved in metabolic processes, catalytic activity, and transport and transcription factor activities, suggesting that these pathways are associated with alkali stress tolerance in rice. Our results illuminated the novel genetic aspects of alkali tolerance in rice and established a repertory of potential target genes for biotechnological manipulations that can be used to generate alkali-tolerant rice cultivars. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

A Multirelational Account of Toleration

DEFF Research Database (Denmark)

Ferretti, Maria Paola; Lægaard, Sune

2013-01-01

Toleration classically denotes a relation between two agents that is characterised by three components: objection, power, and acceptance overriding the objection. Against recent claims that classical toleration is not applicable in liberal democracies and that toleration must therefore either be ...

State, religion and toleration

DEFF Research Database (Denmark)

Huggler, Jørgen

2009-01-01

Contribution to Religion and State - From separation to cooperation? Legal-philosophical reflections for a de-secularized world. (IVR Cracow Special Workshop). Eds. Bart. C. Labuschagne & Ari M. Solon. Abstract: Toleration is indeed a complex phenomenon. A discussion of the concept will have...... to underline not only the broadmindedness and liberty of individuals or of groups, but also the relevant distinctions and arguments in political philosophy, epistemology, philosophy of religion and philosophical anthropology and their connection with educational issues. Through a discussion of these relations......, the essay argues three theses: (1) Toleration is not reducible to an ethics of spiritual freedom. (2) Toleration is not neutral to fanatism. (3) Toleration involves esteem for the person....

Evaluation of Concentrations and Human Health Risk of Cu, Zn, Fe ...

African Journals Online (AJOL)

The estimated daily intake of the metals in the periwinkles was all higher than their provisional tolerable daily and weekly intakes set by regulatory bodies. The non-carcinogenic risks (THQ and HI) of the individual and combined risk of the metals were within the limit of 1 set by USEPA, indicating no health risk at the moment ...

78 FR 40027 - Novaluron; Pesticide Tolerances

Science.gov (United States)

2013-07-03

...). This regulation additionally deletes the time- limited tolerance for strawberry, as that tolerance..., pears, potatoes, strawberries, and tomatoes and utilized estimates for PCT for recently registered uses... deletes the time-limited tolerance for strawberry, as that tolerance expired on December 31, 2011. VI...

ANALYSIS OF FOOD TOLERANCE IN PATIENTS SUBMITTED TO BARIATRIC SURGERY USING THE QUESTIONNAIRE QUALITY OF ALIMENTATION.

Science.gov (United States)

Stumpf, Matheo Augusto Morandi; Rodrigues, Marcos Ricardo da Silva; Kluthcovsky, Ana Claudia Garabeli Cavalli; Travalini, Fabiana; Milléo, Fábio Quirillo

2015-01-01

Due to the increased prevalence of obesity in many countries, the number of bariatric surgeries is increasing. They are considered the most effective treatment for obesity. In the postoperative there may be difficulties with the quality of alimentation, tolerance to various types of food, as well as vomiting and regurgitation. Few surveys are available to assess these difficulties in the postoperative. To perform a systematic literature review about food tolerance in patients undergoing bariatric surgery using the questionnaire "Quality of Alimentation", and compare the results between different techniques. A descriptive-exploratory study where the portals Medline and Scielo were used. The following headings were used in english, spanish and portuguese: quality of alimentation, bariatric surgery and food tolerance. A total of 88 references were found, 14 used the questionnaire "Quality of Alimentation" and were selected. In total, 2745 patients were interviewed of which 371 underwent to gastric banding, 1006 to sleeve gastrectomy, 1113 to Roux-en-Y gastric bypass, 14 to biliopancreatic diversion associated with duodenal switch, 83 were non-operated obese, and 158 non-obese patients. The questionnaire showed good acceptability. The biliopancreatic diversion with duodenal switch had the best food tolerance in the postoperative when compared to other techniques, but it was evaluated in a single article with a small sample. The longer the time after the operation, the better is the food tolerance. Comparing the sleeve gastrectomy and the Roux-en-Y gastric bypass, there are still controversial results in the literature. The gastric banding had the worst score of food tolerance among all the techniques evaluated. The questionnaire is easy and fast to assess the food tolerance in patients after bariatric surgery. Biliopancreatic diversion with duodenal switch had the best food tolerance in the postoperative when compared to sleeve gastrectomy and the Roux-en-Y gastric

Exploring traditional aus-type rice for metabolites conferring drought tolerance.

Science.gov (United States)

Casartelli, Alberto; Riewe, David; Hubberten, Hans Michael; Altmann, Thomas; Hoefgen, Rainer; Heuer, Sigrid

2018-01-25

Traditional varieties and landraces belonging to the aus-type group of rice (Oryza sativa L.) are known to be highly tolerant to environmental stresses, such as drought and heat, and are therefore recognized as a valuable genetic resource for crop improvement. Using two aus-type (Dular, N22) and two drought intolerant irrigated varieties (IR64, IR74) an untargeted metabolomics analysis was conducted to identify drought-responsive metabolites associated with tolerance. The superior drought tolerance of Dular and N22 compared with the irrigated varieties was confirmed by phenotyping plants grown to maturity after imposing severe drought stress in a dry-down treatment. Dular and N22 did not show a significant reduction in grain yield compared to well-watered control plants, whereas the intolerant varieties showed a significant reduction in both, total spikelet number and grain yield. The metabolomics analysis was conducted with shoot and root samples of plants at the tillering stage at the end of the dry-down treatment. The data revealed an overall higher accumulation of N-rich metabolites (amino acids and nucleotide-related metabolites allantoin and uridine) in shoots of the tolerant varieties. In roots, the aus-type varieties were characterised by a higher reduction of metabolites representative of glycolysis and the TCA cycle, such as malate, glyceric acid and glyceric acid-3-phosphate. On the other hand, the oligosaccharide raffinose showed a higher fold increase in both, shoots and roots of the sensitive genotypes. The data further showed that, for certain drought-responsive metabolites, differences between the contrasting rice varieties were already evident under well-watered control conditions. The drought tolerance-related metabolites identified in the aus-type varieties provide a valuable set of protective compounds and an entry point for assessing genetic diversity in the underlying pathways for developing drought tolerant rice and other crops.

TOTAL user manual

Science.gov (United States)

Johnson, Sally C.; Boerschlein, David P.

1994-01-01

Semi-Markov models can be used to analyze the reliability of virtually any fault-tolerant system. However, the process of delineating all of the states and transitions in the model of a complex system can be devastatingly tedious and error-prone. Even with tools such as the Abstract Semi-Markov Specification Interface to the SURE Tool (ASSIST), the user must describe a system by specifying the rules governing the behavior of the system in order to generate the model. With the Table Oriented Translator to the ASSIST Language (TOTAL), the user can specify the components of a typical system and their attributes in the form of a table. The conditions that lead to system failure are also listed in a tabular form. The user can also abstractly specify dependencies with causes and effects. The level of information required is appropriate for system designers with little or no background in the details of reliability calculations. A menu-driven interface guides the user through the system description process, and the program updates the tables as new information is entered. The TOTAL program automatically generates an ASSIST input description to match the system description.

Tolerance of the human spinal cord to single dose radiosurgery

International Nuclear Information System (INIS)

Ryu, S.; Zhu, G.; Yin, F.-F.; Ajlouni, M.; Kim, J.H.

2003-01-01

Tolerance of the spinal cord to the single dose of radiation is not well defined. Although there are cases of human spinal cord tolerance from re-irradiation to the same cord level, the information about the tolerance of human spinal cord to single large dose of radiosurgery is not available. We carried out spinal radiosurgery to treat spinal metastasis and studied the single dose tolerance of the human spinal cord in an ongoing dose escalation paradigm. A total of 39 patients with 48 lesions of spinal metastasis were treated with single dose radiosurgery at Henry Ford Hospital. The radiosurgery dose was escalated from 8 Gy to 16 Gy at 2 Gy increment. The radiation dose was prescribed to periphery of the spinal tumor. The radiation dose to the spinal cord was estimated by computerized dosimetry. The median follow-up time was 10 months (range 6-18 months) from the radiosurgery. The endpoint of the study was to demonstrate the efficacy of the spinal radiosurgery and to determine the tolerance of human spinal cord to single dose radiosurgery. The dose to the spinal cord was generally less than 50 % of the prescribed radiation dose. The volume of the spinal cord that received higher than this dose was less than 20 % of the anterior portion of the spinal cord. Maximum single dose of 8 Gy was delivered to the anterior 20 % of the spinal cord in this dose escalation study. The dose volume histogram will be presented. There was no acute or subacute radiation toxicity detected clinically and radiologically during the maximum follow-up of 20 months. Further dose escalation is in progress. The single tolerance dose of the human spinal cord appears to be at least 8 Gy when it was given to the 20 % of the cord volume, although the duration of follow up is not long enough to detect severe late cord toxicity. This study offers a valuable radiobiological basis of the normal spinal cord tolerance, and opens spinal radiosurgery as a safe treatment for spinal metastasis

Differential DNA methylation patterns define status epilepticus and epileptic tolerance.

Science.gov (United States)

Miller-Delaney, Suzanne F C; Das, Sudipto; Sano, Takanori; Jimenez-Mateos, Eva M; Bryan, Kenneth; Buckley, Patrick G; Stallings, Raymond L; Henshall, David C

2012-02-01

Prolonged seizures (status epilepticus) produce pathophysiological changes in the hippocampus that are associated with large-scale, wide-ranging changes in gene expression. Epileptic tolerance is an endogenous program of cell protection that can be activated in the brain by previous exposure to a non-harmful seizure episode before status epilepticus. A major transcriptional feature of tolerance is gene downregulation. Here, through methylation analysis of 34,143 discrete loci representing all annotated CpG islands and promoter regions in the mouse genome, we report the genome-wide DNA methylation changes in the hippocampus after status epilepticus and epileptic tolerance in adult mice. A total of 321 genes showed altered DNA methylation after status epilepticus alone or status epilepticus that followed seizure preconditioning, with >90% of the promoters of these genes undergoing hypomethylation. These profiles included genes not previously associated with epilepsy, such as the polycomb gene Phc2. Differential methylation events generally occurred throughout the genome without bias for a particular chromosomal region, with the exception of a small region of chromosome 4, which was significantly overrepresented with genes hypomethylated after status epilepticus. Surprisingly, only few genes displayed differential hypermethylation in epileptic tolerance. Nevertheless, gene ontology analysis emphasized the majority of differential methylation events between the groups occurred in genes associated with nuclear functions, such as DNA binding and transcriptional regulation. The present study reports select, genome-wide DNA methylation changes after status epilepticus and in epileptic tolerance, which may contribute to regulating the gene expression environment of the seizure-damaged hippocampus.

Strategies for Developing Drought Tolerant Cowpea varieties for the Semi-Arid regions of Nigeria

International Nuclear Information System (INIS)

Ishiyaku, M. F.

2000-10-01

Drought, meaning the deviation of the total amount and or distribution of precipitation from the normal is an important factor that cause untold human suffering as well as social and economic loss for any nation. Its effects are often felt by places so remote from the area of occurrence. In the agricultural sector, where its effect are most felt, drought risk greatly reduce investment in agriculture. This will no doubt contribute to national food insecurity and social unrest. Of the measures often prescribed to combat the menace of drought include the development and planting of drought resistant/tolerant crop varieties. This paper discusses the strategies for developing drought tolerant cowpea varieties for the drought-prone regions of Nigeria. These strategies include the introduction and screening of candidate drought tolerant cowpea germplasm and their utilization in developing new improved genotypes. The screening of populations will be carried out by adopting novel screening techniques in the lab as well as in the field. In addition to utilizing existing genetic variation to develop varieties with tolerance to drought, new sources of variation will be created artificially for the various traits known to confer tolerance to drought in cowpea. In creating genetic variability for drought tolerance traits artificially, the potential of irradiation induced mutation will be exploited

77 FR 4890 - Damage Tolerance and Fatigue Evaluation for Composite Rotorcraft Structures, and Damage Tolerance...

Science.gov (United States)

2012-02-01

...-AJ52, 2120-AJ51 Damage Tolerance and Fatigue Evaluation for Composite Rotorcraft Structures, and Damage Tolerance and Fatigue Evaluation for Metallic Structures; Correction AGENCY: Federal Aviation Administration... Tolerance and Fatigue Evaluation for Composite Rotorcraft Structures'' (76 FR 74655), published December 1...

Immunosuppressive effect of total lymphoid irradiation

International Nuclear Information System (INIS)

Bendel, V.; Medizinische Hochschule Hannover

1981-01-01

Contrary to the immunosuppression by means of wholebody irradiation which is known for a long while but connected with considerable side effects and risks, the total lymphoid irradiation (TLI) is a new possibility of immunosuppression the tolerance of which by man is known by virtue of long-standing experiences with the treatment of malignant lymphatic system diseases. In connexion with organ transplantations, TLI might possibly soon be important for the radiotherapeutist. In the experimentation on animals, the unspecific immunosuppression induced by TLI causes a prolonged survival time of allogeneic skin and organ grafts in certain mammals. Furthermore, a formation of blood chimeras combined with specific, permanent tolerance of organ grafts from the bone marrow donor can be caused by bone marrow transplantation after TLI. First experiences with man have been made. In the German literature, TLI has not been mentioned yet. In the present study, a summary is given on the Anglo-Saxon literature, and the first own experiments with regard to the problem of irradiation dose and transplantation interval are presented. (orig.) [de

DNA markers linked to the major salinity tolerance locus of traditional rice, Pokkali (abstract)

International Nuclear Information System (INIS)

Rehman, S.; Seraj, Z.I.; Das, D.K.; Salam, M.A.

2005-01-01

The major QTL for salinity tolerance traits, of the traditional rice salt tolerant benchmark Pokkali, referred to as 'Saltol' was located within a large 16cM loci of rice chromosome 1 by previous workers at IRRI. This was done by using a recombinant inbred population between Pokkali and sensitive IR29 (Total RILs=275). These workers had identified the flanking markers, RM23 and RM9, as the limits of 'Saltol'. By designing primers between these two markers, and using a subset of the same RILs, we were able to identify a 5cM region, which was completely linked to the tolerance of seedlings. Further work with a subset of another NIL population raised at IRRI between Pokkali and recurring IR29 at the BC/sub 3/F/sub 2/ stage has narrowed down the linked region to about 0.3cM, each at 4 different locations within the 5cM loc. This was done by scoring the tolerance of the seedlings and determining the percent of progeny that showed the tolerant allele at the specified maker locus. Thirty seedlings from each of 10 BC/sub 3/F/sub 2/ progeny were scored. Only the most tolerant and sensitive seedlings were used for DNA isolation and amplification. The work was derived from complex crosses involving Pokkali as the tolerance donor. Three common loci linked to salinity tolerance were found to be the same in the NILs and the breeding population. DNA markers homologous to these 3 loci will be confirmed for their ability to identify tolerant progeny in breeding populations. (author)

Using Ice Cream for Diagnosis of Diabetes Mellitus and Impaired Glucose Tolerance: An Alternative to the Oral Glucose Tolerance Test.

Science.gov (United States)

Chanprasertpinyo, Wandee; Bhirommuang, Nattapimon; Surawattanawiset, Titiporn; Tangsermwong, Thanwarin; Phanachet, Pariya; Sriphrapradang, Chutintorn

2017-12-01

Oral glucose tolerance test (OGTT) is a sensitive and reliable test for diabetes mellitus and impaired glucose tolerance (IGT). However, poor patient tolerance of glucose solutions is common. We aim to compare the diagnostic value of an ice cream test with a standard OGTT. A total of 104 healthy adults were randomly assigned to either 75-g OGTT or ice cream, followed by a crossover to the other test. Most patients were females (71%). Mean age was 37 ± 12 years, and body mass index was 24.2 ± 3.9kg/m 2 . Diabetes mellitus and IGT, as diagnosed by 75-g OGTT, were 4.8% and 6.7%, respectively. The 2-hour plasma glucose levels were 110 ± 55.5mg/dL with 75-g glucose and 97.52 ± 40.7mg/dL with ice cream. The correlation coefficient of 2-hour plasma glucose for the 2 tests was 0.82 (95% CI: 0.75-0.87; P ice cream test would have missed 5.76% of those at high risk for diabetes mellitus (impaired fasting glucose and IGT) or diabetes. An ice cream test may serve as an alternative to a 75-g OGTT. Before applying this test in clinical practice, it needs to be validated in a larger population. Copyright © 2017 Southern Society for Clinical Investigation. Published by Elsevier Inc. All rights reserved.

Clonal deletion: A mechanism of tolerance in mixed bone marrow chimeras

International Nuclear Information System (INIS)

Yu, J.C.; Webster, M.; Fox, I.J.

1990-01-01

The mechanism of antigen-specific immunologic unresponsiveness which results from lethal irradiation and mixed (syngeneic-allogeneic) bone marrow cell (BMC) reconstitution is unknown. To determine whether clonal deletion is the mechanism of tolerance in this model, monoclonal antibody (Mab) RR-4-4, specific for a T-cell receptor (V beta 6) reactive against the minor alloantigen MLsa, was employed. Six-week-old B10 mice (H-2b, Mlsb, Thyl.2) were tolerized to AKR antigens (H-2k, Mlsa, Thyl.1) by whole body irradiation (950 R) and iv infusion of T-cell-depleted (TCD) B10 BMC + non-TCD AKR BMC. Chimerism and antigen-specific tolerance were documented by flow microfluorometry (FMF), skin grafting, mixed lymphocyte reaction, and cell-mediated lympholysis. When tolerant B10 mice (n = 15) had accepted AKR skin grafts for greater than 100 days, these animals were studied for the presence of host V beta 6+ T cells using Mab RR-4-4. FMF revealed that 0-5% of host (B10) lymph node and spleen cells from chimeras were V beta 6+ while 15-20% of lymph node and spleen cells from control B10 mice expressed V beta 6. These data demonstrate that clonal deletion occurs in the lethal irradiation-mixed reconstitution model as evidenced by the near total elimination of Mlsa-reactive V beta 6+ T cells and suggest that it maybe a mechanism responsible for tolerance in adult mice

Newly Identified Wild Rice Accessions Conferring High Salt Tolerance Might Use a Tissue Tolerance Mechanism in Leaf

Science.gov (United States)

Prusty, Manas R.; Kim, Sung-Ryul; Vinarao, Ricky; Entila, Frederickson; Egdane, James; Diaz, Maria G. Q.; Jena, Kshirod K.

2018-01-01

Cultivated rice (Oryza sativa L.) is very sensitive to salt stress. So far a few rice landraces have been identified as a source of salt tolerance and utilized in rice improvement. These tolerant lines primarily use Na+ exclusion mechanism in root which removes Na+ from the xylem stream by membrane Na+ and K+ transporters, and resulted in low Na+ accumulation in shoot. Identification of a new donor source conferring high salt tolerance is imperative. Wild relatives of rice having wide genetic diversity are regarded as a potential source for crop improvement. However, they have been less exploited against salt stress. Here, we simultaneously evaluated all 22 wild Oryza species along with the cultivated tolerant lines including Pokkali, Nona Bokra, and FL478, and sensitive check varieties under high salinity (240 mM NaCl). Based on the visual salt injury score, three species (O. alta, O. latifolia, and O. coarctata) and four species (O. rhizomatis, O. eichingeri, O. minuta, and O. grandiglumis) showed higher and similar level of tolerance compared to the tolerant checks, respectively. All three CCDD genome species exhibited salt tolerance, suggesting that the CCDD genome might possess the common genetic factors for salt tolerance. Physiological and biochemical experiments were conducted using the newly isolated tolerant species together with checks under 180 mM NaCl. Interestingly, all wild species showed high Na+ concentration in shoot and low concentration in root unlike the tolerant checks. In addition, the wild-tolerant accessions showed a tendency of a high tissue tolerance in leaf, low malondialdehyde level in shoot, and high retention of chlorophyll in the young leaves. These results suggest that the wild species employ tissue tolerance mechanism to manage salt stress. Gene expression analyses of the key salt tolerance-related genes suggested that high Na+ in leaf of wild species might be affected by OsHKT1;4-mediated Na+ exclusion in leaf and the following Na

Radiation-tolerant delta-sigma time-to-digital converters

CERN Document Server

Cao, Ying; Steyaert, Michiel

2015-01-01

This book focuses on the design of a Mega-Gray (a standard unit of total ionizing radiation) radiation-tolerant ps-resolution time-to-digital converter (TDC) for a light detection and ranging (LIDAR) system used in a gamma-radiation environment. Several radiation-hardened-by-design (RHBD) techniques are demonstrated throughout the design of the TDC and other circuit techniques to improve the TDC's resolution in a harsh environment are also investigated. Readers can learn from scratch how to design a radiation-tolerant IC. Information regarding radiation effects, radiation-hardened design techniques and  measurements are organized in such a way that readers can easily gain a thorough understanding of the topic. Readers will also learn the design theory behind the newly proposed delta-sigma TDC. Readers can quickly acquire knowledge about the design of radiation-hardened bandgap voltage references and low-jitter relaxation oscillators, which are introduced in the content from a designer's perspective.   · �...

Wear debris. An environmental issue in total joint replacement.

Science.gov (United States)

Manley, M T; Serekian, P

1994-01-01

There is a growing concern that osteolytic lesions, often adjacent to otherwise stable implants, are a recent phenomenon caused by some recent change in polyethylene, metal, or other aspect of the total hip construction. This study investigates the possibility that bearings and modular connections used in modern hip replacements are an unappreciated source of particulate debris. Measurements taken from contemporary femoral bearings show a significant mismatch in both surface finish and sphericity of mating metal and polyethylene components, with sphericity of inserts being much worse then sphericity of femoral heads. The tolerances for sphericity of polyethylene inserts were further changed by the placement of an insert into its metal shell. Hip simulator tests of assembled inserts and shells showed greater polyethylene weight loss for metal-backed shells than for inserts alone. Bending and torsional tests of metal/metal modular connections showed that dynamic loads can release large numbers of debris particles from taper junctions. Because osteolytic lesions clearly are associated with overload of tissue by debris particles, the design, manufacture, and tolerances of modular connections in total hip replacement all seem to require reevaluation.

75 FR 29908 - Prothioconazole; Pesticide Tolerances

Science.gov (United States)

2010-05-28

.... The straw numerical value (5 ppm) is matched between the U.S. and Codex. The tolerance definition for... lower (0.07 ppm) than the recommended U.S. group tolerance. The 0.07 ppm value is the current U.S. tolerance value for wheat, but will be replaced by the cereal grain group tolerance. Canada does not...

Drought tolerance in potato (S. tuberosum L.): Can we learn from drought tolerance research in cereals?

Science.gov (United States)

Monneveux, Philippe; Ramírez, David A; Pino, María-Teresa

2013-05-01

Drought tolerance is a complex trait of increasing importance in potato. Our knowledge is summarized concerning drought tolerance and water use efficiency in this crop. We describe the effects of water restriction on physiological characteristics, examine the main traits involved, report the attempts to improve drought tolerance through in vitro screening and marker assisted selection, list the main genes involved and analyze the potential interest of native and wild potatoes to improve drought tolerance. Drought tolerance has received more attention in cereals than in potato. The review compares these crops for indirect selection methods available for assessment of drought tolerance related traits, use of genetic resources, progress in genomics, application of water saving techniques and availability of models to anticipate the effects of climate change on yield. It is concluded that drought tolerance improvement in potato could greatly benefit from the transfer of research achievements in cereals. Several promising research directions are presented, such as the use of fluorescence, reflectance, color and thermal imaging and stable isotope techniques to assess drought tolerance related traits, the application of the partial root-zone drying technique to improve efficiency of water supply and the exploitation of stressful memory to enhance hardiness. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Incorporation of [14C]-palmitate into lipids of Brassica cells during the induction of freezing tolerance

International Nuclear Information System (INIS)

Lynch, D.V.; Joseph, R.A.

1989-01-01

Changes in plasma membrane lipid composition have been causally related to increased freezing tolerance. Studies of lipid metabolism during ABA induction of freezing tolerance in Brassica napus suspension cultures were undertaken. Cells were labeled with [ 14 C]-palmitate four days after transfer to fresh medium (control) or medium containing ABA (which increases freezing tolerance). At times between one and 20 hrs after labeling, ABA-treated cells incorporated almost twice the amount of label as controls cells. Approximately 80% of the radioactivity was associated with neutral lipids in ABA-treated cells and controls. Incorporation of label into total cellular polar lipids was 4.9 x 10 5 dpm/mg protein for control cells and 1 x 10 6 dpm/mg protein for cells transferred to medium containing ABA. Analysis of lipids following alkaline hydrolysis indicated that incorporation of [ 14 C]-palmitate into glucosylceramide of ABA-treated cells was less than 60% of control values when expressed relative to that of the total polar lipids. Incorporation into ceramides was also depressed in ABA-treated cells

Elevated 1-h post-challenge plasma glucose levels in subjects with normal glucose tolerance or impaired glucose tolerance are associated with whole blood viscosity.

Science.gov (United States)

Marini, Maria Adelaide; Fiorentino, Teresa Vanessa; Andreozzi, Francesco; Mannino, Gaia Chiara; Perticone, Maria; Sciacqua, Angela; Perticone, Francesco; Sesti, Giorgio

2017-08-01

It has been suggested that glucose levels ≥155 mg/dl at 1-h during an oral glucose tolerance test (OGTT) may predict development of type 2 diabetes and cardiovascular events among adults with normal glucose tolerance (NGT 1 h-high). Studies showed a link between increased blood viscosity and type 2 diabetes. However, whether blood viscosity is associated with dysglycemic conditions such as NGT 1 h-high, impaired glucose tolerance (IGT) or impaired fasting glucose (IFG) is unsettled. 1723 non-diabetic adults underwent biochemical evaluation and OGTT. A validated formula based on hematocrit and total plasma proteins was employed to estimate whole blood viscosity. Subjects were categorized into NGT with 1 h glucose h-low), NGT-1 h-high, IFG and/or IGT. Hematocrit and blood viscosity values appeared significantly higher in individuals with NGT 1 h-high, IFG and/or IGT as compared to NGT 1 h-low subjects. Blood viscosity was significantly correlated with age, waist circumference, blood pressure, HbA1c, fasting, 1- and 2-h post-challenge insulin levels, total cholesterol and low-density lipoprotein, triglycerides, fibrinogen, white blood cell, and inversely correlated with high-density lipoprotein and insulin sensitivity. Of the four glycemic parameters, 1-h post-challenge glucose showed the strongest correlation with blood viscosity (β = 0.158, P h post-challenge plasma glucose. They also suggest that a subgroup of NGT individuals with 1-h post-challenge plasma >155 mg/dl have increased blood viscosity comparable to that observed in subjects with IFG and/or IGT.

Frustration Tolerance in Youth With ADHD.

Science.gov (United States)

Seymour, Karen E; Macatee, Richard; Chronis-Tuscano, Andrea

2016-06-08

The objective of this study was to compare children with ADHD with children without ADHD on frustration tolerance and to examine the role of oppositional defiant disorder (ODD) in frustration tolerance within the sample. Participants included 67 children ages 10 to 14 years-old with (n = 37) and without (n = 30) Diagnostic and Statistical Manual of Mental Disorders (4th ed.; DSM-IV) ADHD who completed the Mirror Tracing Persistence Task (MTPT), a validated computerized behavioral measure of frustration tolerance. Children with ADHD were more likely to quit this task than children without ADHD, demonstrating lower levels of frustration tolerance. There were no differences in frustration tolerance between children with ADHD + ODD and those with ADHD - ODD. Moreover, ODD did not moderate the relationship between ADHD and frustration tolerance. Our results suggest that low frustration tolerance is directly linked to ADHD and not better accounted for by ODD. This research highlights specific behavioral correlates of frustration in children with ADHD. © The Author(s) 2016.

IRON-TOLERANT CYANOBACTERIA: IMPLICATIONS FOR ASTROBIOLOGY

Science.gov (United States)

Brown, Igor I.; Allen, Carlton C.; Mummey, Daniel L.; Sarkisova, Svetlana A.; McKay, David S.

2006-01-01

The review is dedicated to the new group of extremophiles - iron tolerant cyanobacteria. The authors have analyzed earlier published articles about the ecology of iron tolerant cyanobacteria and their diversity. It was concluded that contemporary iron depositing hot springs might be considered as relative analogs of Precambrian environment. The authors have concluded that the diversity of iron-tolerant cyanobacteria is understudied. The authors also analyzed published data about the physiological peculiarities of iron tolerant cyanobacteria. They made the conclusion that iron tolerant cyanobacteria may oxidize reduced iron through the photosystem of cyanobacteria. The involvement of both Reaction Centers 1 and 2 is also discussed. The conclusion that iron tolerant protocyanobacteria could be involved in banded iron formations generation is also proposed. The possible mechanism of the transition from an oxygenic photosynthesis to an oxygenic one is also discussed. In the final part of the review the authors consider the possible implications of iron tolerant cyanobacteria for astrobiology.

Use of tolerance values to diagnose water-quality stressors to aquatic biota in New England streams

Science.gov (United States)

Meador, M.R.; Carlisle, D.M.; Coles, J.F.

2008-01-01

Identification of stressors related to biological impairment is critical to biological assessments. We applied nationally derived tolerance indicator values for four water-quality variables to fish and benthic macroinvertebrate assemblages at 29 sites along an urban gradient in New England. Tolerance indicator values (TIVs), as biologically based predictors of water-quality variables, were determined for dissolved oxygen, nitrite plus nitrate (nitrate), total phosphorus, and water temperature for each site based on observed biological assemblages (TIVO), and for expected assemblages (TIVE). The quotient method, based on a ratio of the TIVs for observed and expected assemblages (tolerance units), was used to diagnose potential water-quality stressors. In addition, the ratio of measured water-quality values to water-quality criteria (water-quality units) was calculated for each water-quality variable to assess measured water-quality stressors. Results from a RIVPACS predictive model for benthic macroinvertebrates and Bray-Curtis dissimilarity for fish were used to classify sites into categories of good or impaired ecological condition. Significant differences were detected between good and impaired sites for all biological tolerance units (fish and benthic macroinvertebrate assemblages averaged) except for nitrate (P = 0.480), and for all water-quality units except for nitrate (P = 0.183). Diagnosis of water-quality stressors at selected sites was, in general, consistent with State-reported causes of impairment. Tolerance units for benthic macroinvertebrate and fish assemblages were significantly correlated for water temperature (P = 0.001, r = 0.63), dissolved oxygen (P = 0.001, r = 0.61), and total phosphorus (P = 0.001, r = 0.61), but not for nitrate (P = 0.059, r = -0.35). Differences between the two assemblages in site-specific diagnosis of water-quality stressors may be the result of differences in nitrate tolerance.

Immediate provisionalization in the esthetic zone: 1-year interim results from a prospective single-cohort multicenter study evaluating 3.0-mm-diameter tapered implants.

Science.gov (United States)

Kolinski, Martin; Hess, Pablo; Leziy, Sonia; Friberg, Bertil; Bellucci, Gionata; Trisciuoglio, Davide; Wagner, Wilfried; Moergel, Maximilian; Pozzi, Alessandro; Wiltfang, Jörg; Behrens, Eleonore; Zechner, Werner; Vasak, Christoph; Weigl, Paul

2018-07-01

The aim of this interim analysis of a 5-year prospective multicenter study is to evaluate clinical and radiological performance of immediately provisionalized 3.0-mm-diameter tapered implants. Patients needing implant rehabilitation of maxillary lateral incisors or mandibular lateral and central incisors were treated with 3.0-mm-diameter implants placed in extraction or healed sites and immediately provisionalized. Clinical and radiographic examinations were performed at implant insertion, 6 months thereafter, and are ongoing. Marginal bone levels and changes, complications, the papilla, plaque, and bleeding indices, and the pink esthetic score (PES) were evaluated at each follow-up visit. Of 112 enrolled patients, 77 patients (91 implants) met the inclusion criteria. Seventy-one patients with 82 implants completed the 1-year follow-up. Three implants failed yielding a CSR of 96.7%. All failures occurred within the first 3 months after implant insertion. Marginal bone level changes from insertion to 6 months was - 0.57 ± 1.30 mm (n = 75) and from insertion to 12 months - 0.25 ± 1.38 mm (n = 72). Fifteen non-serious complications were recorded. Papilla index score and PES improved at the 1-year follow-up. Plaque formation and bleeding-on-probing showed no statistically significant differences between the 6-month and the 1-year visit. This 1-year analysis demonstrated high survival, stable bone levels, and healthy soft tissue with 3.0-mm-diameter implants. Narrow diameter implants are a safe and predictable treatment option in patients with limited bone volume and/or limited interdental space and eligible for immediate loading protocols.

Tolerances in micro manufacturing

DEFF Research Database (Denmark)

Hansen, Hans Nørgaard; Zhang, Yang; Islam, Aminul

This paper describes a method for analysis of tolerances in micro manufacturing. It proposes a mapping oftolerances to dimensions and compares this with current available international standards. The analysisdocuments that tolerances are not scaled down as the absolute dimension. In practice...

Second-Line Hormonal Therapy for Men With Chemotherapy-Naïve, Castration-Resistant Prostate Cancer: American Society of Clinical Oncology Provisional Clinical Opinion.

Science.gov (United States)

Virgo, Katherine S; Basch, Ethan; Loblaw, D Andrew; Oliver, Thomas K; Rumble, R Bryan; Carducci, Michael A; Nordquist, Luke; Taplin, Mary-Ellen; Winquist, Eric; Singer, Eric A

2017-06-10

Purpose ASCO provisional clinical opinions (PCOs) offer direction to the ASCO membership after publication or presentation of potential practice-changing data. This PCO addresses second-line hormonal therapy for chemotherapy-naïve men with castration-resistant prostate cancer (CRPC) who range from being asymptomatic with only biochemical evidence of CRPC to having documented metastases but minimal symptoms. Clinical Context The treatment goal for CRPC is palliation. Despite resistance to initial androgen deprivation therapy, most men respond to second-line hormonal therapies. However, guidelines have neither addressed second-line hormonal therapy for nonmetastatic CRPC nor provided specific guidance with regard to the chemotherapy-naïve population. Recent Data Six phase III randomized controlled trials and expert consensus opinion inform this PCO. Provisional Clinical Opinion For men with CRPC, a castrate state should be maintained indefinitely. Second-line hormonal therapy (eg, antiandrogens, CYP17 inhibitors) may be considered in patients with nonmetastatic CRPC at high risk for metastatic disease (rapid prostate-specific antigen doubling time or velocity) but otherwise is not suggested. In patients with radiographic evidence of metastases and minimal symptoms, enzalutamide or abiraterone plus prednisone should be offered after discussion with patients about potential harms, benefits, costs, and patient preferences. Radium-223 and sipuleucel-T also are options. No evidence provides guidance about the optimal order of hormonal therapies for CRPC beyond second-line treatment. Prostate-specific antigen testing every 4 to 6 months is reasonable for men without metastases. Routine radiographic restaging generally is not suggested but can be considered for patients at risk for metastases or who exhibit symptoms or other evidence of progression. Additional information is available at www.asco.org/genitourinary-cancer-guidelines and www.asco.org/guidelineswiki .

Hyperfractionated abdominal radiotherapy in children. Efficacy and tolerance in 13 cases

International Nuclear Information System (INIS)

Lagrange, J.L.; Roullet, B.; Cosset, J.M.; Sarrazin, D.; Lemerle, J.

1984-01-01

The experience at IGR has shown that hyperfractionation, especially abdominal has been well tolerated in adult patients. This finding led to employ this technic in the pediatric population who had failed standard treatment. An experience with hyperfractionated radiotherapy of the abdomen and liver in children, is reported. The children were treated 4 days per week, receiving 5 fractions daily of 0.7 Gy, with a 2 hours interval between each treatment. A total dose of 28 Gy was delivered in 40 fractions over 12 days. A second course of irradiation was delivered in 5 patients, 3 with abdominal treatment and 2 with liver irradiation. The vital organs were shielded with blocks at normal dose tolerance levels. The results are encouraging since an immediate efficacy was observed in 8 of 13 patients. Long term survivals were observed in 4 patients with nephroblastomas and 1 patient with a hepatoblastoma. On the other hand acute gastrointestinal tolerance seemed less good in the children than previously observed in the adults. Five radiation hepatitis appeared, immediately after the irradiation, whom four children irradiated to the entire abdomen [fr

Breeding of Freeze-tolerant Yeast and the Mechanisms of Stress-tolerance

Science.gov (United States)

Hino, Akihiro

Frozen dough method have been adopted in the baking industry to reduce labor and to produce fresh breads in stores. New freeze-tolerant yeasts for frozen dough preparations were isolated from banana peel and identified. To obtain strains that have fermentative ability even after several months of frozen storage in fermented dough, we attempted to breed new freeze-tolerantstrain. The hybrid between S.cerevisiae, which is a isolated freeze-tolerant strain, and a strain isolated from bakers' yeast with sexual conjugation gave a good quality bread made from frozen dough method. Freeze-tolerant strains showed higher surviving and trehalose accumulating abilities than freeze-sensitive strains. The freeze tolerance of the yeasts was associated with the basal amount of intracellular trehalose after rapid degradation at the onset of the prefermentation period. The complicated metabolic pathway and the regulation system of trehalose in yeast cells are introduced. The trehalose synthesis may act as a metabolic buffer system which contribute to maintain the intracellular inorganic phosphate and as a feedback regulation system in the glycolysis. However, it is not known enough how the trehalose protects yeast cells from stress.

A new class of organic nitrates: investigations on bioactivation, tolerance and cross-tolerance phenomena.

Science.gov (United States)

Schuhmacher, S; Schulz, E; Oelze, M; König, A; Roegler, C; Lange, K; Sydow, L; Kawamoto, T; Wenzel, P; Münzel, T; Lehmann, J; Daiber, A

2009-09-01

The chronic use of organic nitrates is limited by serious side effects including oxidative stress, nitrate tolerance and/or endothelial dysfunction. The side effects and potency of nitroglycerine depend on mitochondrial aldehyde dehydrogenase (ALDH-2). We sought to determine whether this concept can be extended to a new class of organic nitrates with amino moieties (aminoalkyl nitrates). Vasodilator potency of the organic nitrates, in vitro tolerance and in vivo tolerance (after continuous infusion for 3 days) were assessed in wild-type and ALDH-2 knockout mice by isometric tension studies. Mitochondrial oxidative stress was analysed by L-012-dependent chemiluminescence and protein tyrosine nitration. Aminoethyl nitrate (AEN) showed an almost similar potency to glyceryl trinitrate (GTN), even though it is only a mononitrate. AEN-dependent vasodilatation was mediated by cGMP and nitric oxide. In contrast to triethanolamine trinitrate (TEAN) and GTN, AEN bioactivation did not depend on ALDH-2 and caused no in vitro tolerance. In vivo treatment with TEAN and GTN, but not with AEN, induced cross-tolerance to acetylcholine (ACh)-dependent and GTN-dependent relaxation. Although all nitrates tested induced tolerance to themselves, only TEAN and GTN significantly increased mitochondrial oxidative stress in vitro and in vivo. The present results demonstrate that not all high potency nitrates are bioactivated by ALDH-2 and that high potency of a given nitrate is not necessarily associated with induction of oxidative stress or nitrate tolerance. Obviously, there are distinct pathways for bioactivation of organic nitrates, which for AEN may involve xanthine oxidoreductase rather than P450 enzymes.

Transplantation Tolerance through Hematopoietic Chimerism: Progress and Challenges for Clinical Translation

Directory of Open Access Journals (Sweden)

Benedikt Mahr

2017-12-01

Full Text Available The perception that transplantation of hematopoietic stem cells can confer tolerance to any tissue or organ from the same donor is widely accepted but it has not yet become a treatment option in clinical routine. The reasons for this are multifaceted but can generally be classified into safety and efficacy concerns that also became evident from the results of the first clinical pilot trials. In comparison to standard immunosuppressive therapies, the infection risk associated with the cytotoxic pre-conditioning necessary to allow allogeneic bone marrow engraftment and the risk of developing graft-vs.-host disease (GVHD constitute the most prohibitive hurdles. However, several approaches have recently been developed at the experimental level to reduce or even overcome the necessity for cytoreductive conditioning, such as costimulation blockade, pro-apoptotic drugs, or Treg therapy. But even in the absence of any hazardous pretreatment, the recipients are exposed to the risk of developing GVHD as long as non-tolerant donor T cells are present. Total lymphoid irradiation and enriching the stem cell graft with facilitating cells emerged as potential strategies to reduce this peril. On the other hand, the long-lasting survival of kidney allografts, seen with transient chimerism in some clinical series, questions the need for durable chimerism for robust tolerance. From a safety point of view, loss of chimerism would indeed be favorable as it eliminates the risk of GVHD, but also complicates the assessment of tolerance. Therefore, other biomarkers are warranted to monitor tolerance and to identify those patients who can safely be weaned off immunosuppression. In addition to these safety concerns, the limited efficacy of the current pilot trials with approximately 40–60% patients becoming tolerant remains an important issue that needs to be resolved. Overall, the road ahead to clinical routine may still be rocky but the first successful long

Lead, zinc and copper accumulation and tolerance in populations of Paspalum distichum and Cynodon dactylon

International Nuclear Information System (INIS)

Shu, W.S.; Ye, Z.H.; Lan, C.Y.; Zhang, Z.Q.; Wong, M.H.

2002-01-01

Metal-tolerant populations of the plants Paspalum distichum and Cunodon dactylon were identified. - Both Fankou and Lechang lead/zinc (Pb/Zn) mine tailings located at Guangdong Province contained high levels of total and DTPA-extractable Pb, Zn and Cu. Paspalum distichum and Cynodon dactylon were dominant species colonized naturally on the tailings. Lead, zinc and copper accumulation and tolerance of different populations of the two grasses growing on the tailings were investigated. Tillers of these populations including those from an uncontaminated area were subjected to the following concentrations: 5, 10, 20, 30 and 40 mg l -1 Pb, 2.5, 5, 10, 20 and 30 mg l -1 Zn, or 0.25, 0.50, 1 and 2 mg l -1 Cu for 14 days, respectively, then tolerance index (TI) and EC 50 (the concentrations of metals in solutions which reduce 50% of normal root growth) were calculated. The results indicated that both Lechang and Fankou populations of the two grasses showed a greater tolerance to the three metals than those growing on the uncontaminated area, which suggested that co-tolerant ecotypes have evolved in the two grasses. P. distichum collected from Fankou tailings had the highest tolerance to Cu while Lechang population the highest tolerance to Pb and Zn among the tested populations, and tolerance levels in P. distichum were related to metal concentrations in the plants. P. distichum had a better growth performance than C. dactylon when both of them were grown on the tailings sites. Tolerant populations of these species would serve as potential candidates for re-vegetation of wastelands contaminated with Pb, Zn and Cu

Lead, zinc and copper accumulation and tolerance in populations of Paspalum distichum and Cynodon dactylon

Energy Technology Data Exchange (ETDEWEB)

Shu, W.S.; Ye, Z.H.; Lan, C.Y.; Zhang, Z.Q.; Wong, M.H

2002-12-01

Metal-tolerant populations of the plants Paspalum distichum and Cunodon dactylon were identified. - Both Fankou and Lechang lead/zinc (Pb/Zn) mine tailings located at Guangdong Province contained high levels of total and DTPA-extractable Pb, Zn and Cu. Paspalum distichum and Cynodon dactylon were dominant species colonized naturally on the tailings. Lead, zinc and copper accumulation and tolerance of different populations of the two grasses growing on the tailings were investigated. Tillers of these populations including those from an uncontaminated area were subjected to the following concentrations: 5, 10, 20, 30 and 40 mg l{sup -1} Pb, 2.5, 5, 10, 20 and 30 mg l{sup -1} Zn, or 0.25, 0.50, 1 and 2 mg l{sup -1} Cu for 14 days, respectively, then tolerance index (TI) and EC{sub 50} (the concentrations of metals in solutions which reduce 50% of normal root growth) were calculated. The results indicated that both Lechang and Fankou populations of the two grasses showed a greater tolerance to the three metals than those growing on the uncontaminated area, which suggested that co-tolerant ecotypes have evolved in the two grasses. P. distichum collected from Fankou tailings had the highest tolerance to Cu while Lechang population the highest tolerance to Pb and Zn among the tested populations, and tolerance levels in P. distichum were related to metal concentrations in the plants. P. distichum had a better growth performance than C. dactylon when both of them were grown on the tailings sites. Tolerant populations of these species would serve as potential candidates for re-vegetation of wastelands contaminated with Pb, Zn and Cu.

Measuring the ambiguity tolerance of medical students: a cross-sectional study from the first to sixth academic years.

Science.gov (United States)

Weissenstein, Anne; Ligges, Sandra; Brouwer, Britta; Marschall, Bernhard; Friederichs, Hendrik

2014-01-09

Tolerance of ambiguity, or the extent to which ambiguous situations are perceived as desirable, is an important component of the attitudes and behaviors of medical students. However, few studies have compared this trait across the years of medical school. General practitioners are considered to have a higher ambiguity tolerance than specialists. We compared ambiguity tolerance between general practitioners and medical students. We designed a cross-sectional study to evaluate the ambiguity tolerance of 622 medical students in the first to sixth academic years. We compared this with the ambiguity tolerance of 30 general practitioners. We used the inventory for measuring ambiguity tolerance (IMA) developed by Reis (1997), which includes three measures of ambiguity tolerance: openness to new experiences, social conflicts, and perception of insoluble problems. We obtained a total of 564 complete data sets (return rate 90.1%) from medical students and 29 questionnaires (return rate 96.7%) from general practitioners. In relation to the reference groups defined by Reis (1997), medical students had poor ambiguity tolerance on all three scales. No differences were found between those in the first and the sixth academic years, although we did observe gender-specific differences in ambiguity tolerance. We found no differences in ambiguity tolerance between general practitioners and medical students. The ambiguity tolerance of the students that we assessed was below average, and appeared to be stable throughout the course of their studies. In contrast to our expectations, the general practitioners did not have a higher level of ambiguity tolerance than the students did.

Efficacy, safety and tolerability of rasagiline as adjunctive therapy in elderly patients with Parkinson's disease.

Science.gov (United States)

Tolosa, E; Stern, M B

2012-02-01

Rasagiline, an MAO-B inhibitor, is indicated for the treatment of Parkinson's disease (PD). In this post hoc analysis, the efficacy, safety and tolerability of rasagiline as an adjunct to levodopa were compared with placebo in elderly (≥70 years) and younger (Rasagiline: Efficacy and Safety on the Treatment of 'OFF' and Lasting effect in Adjunct therapy with Rasagiline Given Once daily randomized, double-blind, placebo-controlled trials with the primary efficacy end-point being the reduction from baseline in daily OFF time. Secondary efficacy end-points included scores for Clinical Global Improvement (CGI)-Examiner during ON time, Unified Parkinson's Disease Rating Scale (UPDRS)-ADL during OFF time, UPDRS-Motor during ON time and total daily ON time with and without troublesome dyskinesia. Tolerability was evaluated from adverse events (AEs) in the two age groups. Rasagiline decreased daily OFF time versus placebo (Prasagiline but were not significant. Between-group comparisons (≥70 vs. efficacy was unaffected by age for all end-points (P>0.1), and rasagiline was well tolerated amongst both groups of patients with a comparable incidence of total and dopaminergic AEs (P>0.1). Adjunct rasagiline is efficacious and well tolerated in elderly non-demented patients (≥70 years) with moderate to advanced PD. Confirmation of the efficacy and safety of rasagiline in the elderly patient subgroup is especially relevant because of the increasing number of elderly patients with PD. © 2011 The Author(s). European Journal of Neurology © 2011 EFNS.

Double Kissing Crush Versus Provisional Stenting for Left Main Distal Bifurcation Lesions: DKCRUSH-V Randomized Trial.

Science.gov (United States)

Chen, Shao-Liang; Zhang, Jue-Jie; Han, Yaling; Kan, Jing; Chen, Lianglong; Qiu, Chunguang; Jiang, Tiemin; Tao, Ling; Zeng, Hesong; Li, Li; Xia, Yong; Gao, Chuanyu; Santoso, Teguh; Paiboon, Chootopol; Wang, Yan; Kwan, Tak W; Ye, Fei; Tian, Nailiang; Liu, Zhizhong; Lin, Song; Lu, Chengzhi; Wen, Shangyu; Hong, Lang; Zhang, Qi; Sheiban, Imad; Xu, Yawei; Wang, Lefeng; Rab, Tanveer S; Li, Zhanquan; Cheng, Guanchang; Cui, Lianqun; Leon, Martin B; Stone, Gregg W

2017-11-28

Provisional stenting (PS) is the most common technique used to treat distal left main (LM) bifurcation lesions in patients with unprotected LM coronary artery disease undergoing percutaneous coronary intervention. The double kissing (DK) crush planned 2-stent technique has been shown to improve clinical outcomes in non-LM bifurcations compared with PS, and in LM bifurcations compared with culotte stenting, but has never been compared with PS in LM bifurcation lesions. The authors sought to determine whether a planned DK crush 2-stent technique is superior to PS for patients with true distal LM bifurcation lesions. The authors randomized 482 patients from 26 centers in 5 countries with true distal LM bifurcation lesions (Medina 1,1,1 or 0,1,1) to PS (n = 242) or DK crush stenting (n = 240). The primary endpoint was the 1-year composite rate of target lesion failure (TLF): cardiac death, target vessel myocardial infarction, or clinically driven target lesion revascularization. Routine 13-month angiographic follow-up was scheduled after ascertainment of the primary endpoint. TLF within 1 year occurred in 26 patients (10.7%) assigned to PS, and in 12 patients (5.0%) assigned to DK crush (hazard ratio: 0.42; 95% confidence interval: 0.21 to 0.85; p = 0.02). Compared with PS, DK crush also resulted in lower rates of target vessel myocardial infarction I (2.9% vs. 0.4%; p = 0.03) and definite or probable stent thrombosis (3.3% vs. 0.4%; p = 0.02). Clinically driven target lesion revascularization (7.9% vs. 3.8%; p = 0.06) and angiographic restenosis within the LM complex (14.6% vs. 7.1%; p = 0.10) also tended to be less frequent with DK crush compared with PS. There was no significant difference in cardiac death between the groups. In the present multicenter randomized trial, percutaneous coronary intervention of true distal LM bifurcation lesions using a planned DK crush 2-stent strategy resulted in a lower rate of TLF at 1 year than a PS�

pH-Dependent solubility and permeability criteria for provisional biopharmaceutics classification (BCS and BDDCS) in early drug discovery.

Science.gov (United States)

Varma, Manthena V; Gardner, Iain; Steyn, Stefanus J; Nkansah, Paul; Rotter, Charles J; Whitney-Pickett, Carrie; Zhang, Hui; Di, Li; Cram, Michael; Fenner, Katherine S; El-Kattan, Ayman F

2012-05-07

The Biopharmaceutics Classification System (BCS) is a scientific framework that provides a basis for predicting the oral absorption of drugs. These concepts have been extended in the Biopharmaceutics Drug Disposition Classification System (BDDCS) to explain the potential mechanism of drug clearance and understand the effects of uptake and efflux transporters on absorption, distribution, metabolism, and elimination. The objective of present work is to establish criteria for provisional biopharmaceutics classification using pH-dependent passive permeability and aqueous solubility data generated from high throughput screening methodologies in drug discovery settings. The apparent permeability across monolayers of clonal cell line of Madin-Darby canine kidney cells, selected for low endogenous efflux transporter expression, was measured for a set of 105 drugs, with known BCS and BDDCS class. The permeability at apical pH 6.5 for acidic drugs and at pH 7.4 for nonacidic drugs showed a good correlation with the fraction absorbed in human (Fa). Receiver operating characteristic (ROC) curve analysis was utilized to define the permeability class boundary. At permeability ≥ 5 × 10(-6) cm/s, the accuracy of predicting Fa of ≥ 0.90 was 87%. Also, this cutoff showed more than 80% sensitivity and specificity in predicting the literature permeability classes (BCS), and the metabolism classes (BDDCS). The equilibrium solubility of a subset of 49 drugs was measured in pH 1.2 medium, pH 6.5 phosphate buffer, and in FaSSIF medium (pH 6.5). Although dose was not considered, good concordance of the measured solubility with BCS and BDDCS solubility class was achieved, when solubility at pH 1.2 was used for acidic compounds and FaSSIF solubility was used for basic, neutral, and zwitterionic compounds. Using a cutoff of 200 μg/mL, the data set suggested a 93% sensitivity and 86% specificity in predicting both the BCS and BDDCS solubility classes. In conclusion, this study identified

A measure for provisional-and-urgent sanitary improvement in developing countries: septic-tank performance improvement.

Science.gov (United States)

Harada, H; Dong, N T; Matsui, S

2008-01-01

Although many cities have planed to develop sewerages in developing countries, sewerage establishment still requires huge investment and engineering efforts. Improvement of existing sanitation facilities may contribute the betterment of urban sanitation before sewerage establishment. The purpose of this study is to propose a measure to improve urban sanitation in areas where a sewerage development plan is proposed but has not been yet established, based on a case study in Hanoi, Vietnam. We found that 90.5% of human excreta flowed into septic tanks. However, 89.6% of septic tanks have never been desludged in the past and their performance was observed to be at a low level. The study also showed that if they introduce regular desludging with a frequency of once a year, they can eliminate 72.8% of COD loads from septic tanks. It was indicated that the performance can be dramatically recovered by regular desludging, which could contribute urban sanitation improvement in Hanoi. In conclusion, the performance recovery of septic tanks by regular desludging was proposed as a provisional-and-urgent measure for urban sanitation improvement, together with the septage treatment in sewage sludge treatment facilities, which should be established earlier than other facilities of sewage treatment systems. IWA Publishing 2008.

Dietary live yeast alters metabolic profiles, protein biosynthesis and thermal stress tolerance of Drosophila melanogaster.

Science.gov (United States)

Colinet, Hervé; Renault, David

2014-04-01

The impact of nutritional factors on insect's life-history traits such as reproduction and lifespan has been excessively examined; however, nutritional determinant of insect's thermal tolerance has not received a lot of attention. Dietary live yeast represents a prominent source of proteins and amino acids for laboratory-reared drosophilids. In this study, Drosophila melanogaster adults were fed on diets supplemented or not with live yeast. We hypothesized that manipulating nutritional conditions through live yeast supplementation would translate into altered physiology and stress tolerance. We verified how live yeast supplementation affected body mass characteristics, total lipids and proteins, metabolic profiles and cold tolerance (acute and chronic stress). Females fed with live yeast had increased body mass and contained more lipids and proteins. Using GC/MS profiling, we found distinct metabolic fingerprints according to nutritional conditions. Metabolite pathway enrichment analysis corroborated that live yeast supplementation was associated with amino acid and protein biosyntheses. The cold assays revealed that the presence of dietary live yeast greatly promoted cold tolerance. Hence, this study conclusively demonstrates a significant interaction between nutritional conditions and thermal tolerance. Copyright © 2014 Elsevier Inc. All rights reserved.

Diagnosis and fault-tolerant control

CERN Document Server

Blanke, Mogens; Lunze, Jan; Staroswiecki, Marcel

2016-01-01

Fault-tolerant control aims at a gradual shutdown response in automated systems when faults occur. It satisfies the industrial demand for enhanced availability and safety, in contrast to traditional reactions to faults, which bring about sudden shutdowns and loss of availability. The book presents effective model-based analysis and design methods for fault diagnosis and fault-tolerant control. Architectural and structural models are used to analyse the propagation of the fault through the process, to test the fault detectability and to find the redundancies in the process that can be used to ensure fault tolerance. It also introduces design methods suitable for diagnostic systems and fault-tolerant controllers for continuous processes that are described by analytical models of discrete-event systems represented by automata. The book is suitable for engineering students, engineers in industry and researchers who wish to get an overview of the variety of approaches to process diagnosis and fault-tolerant contro...

Potassium and zinc increase tolerance to salt stress in wheat (Triticum aestivum L.).

Science.gov (United States)

Jan, Amin Ullah; Hadi, Fazal; Midrarullah; Nawaz, Muhammad Asif; Rahman, Khaista

2017-07-01

Potassium and zinc are essential elements in plant growth and metabolism and plays a vital role in salt stress tolerance. To investigate the physiological mechanism of salt stress tolerance, a pot experiment was conducted. Potassium and zinc significantly minimize the oxidative stress and increase root, shoot and spike length in wheat varieties. Fresh and dry biomass were significantly increased by potassium followed by zinc as compared to control C. The photosynthetic pigment and osmolyte regulator (proline, total phenolic, and total carbohydrate) were significantly enhanced by potassium and zinc. Salt stress increases MDA content in wheat varieties while potassium and zinc counteract the adverse effect of salinity and significantly increased membrane stability index. Salt stress decreases the activities of antioxidant enzymes (superoxide dismutase, catalase and ascorbate peroxidase) while the exogenous application of potassium and zinc significantly enhanced the activities of these enzymes. A significant positive correlation was found of spike length with proline (R 2  = 0.966 ∗∗∗ ), phenolic (R 2  = 0.741 ∗ ) and chlorophyll (R 2  = 0.853 ∗∗ ). The MDA content showed significant negative correlation (R 2  = 0.983 ∗∗∗ ) with MSI. It is concluded that potassium and zinc reduced toxic effect of salinity while its combine application showed synergetic effect and significantly enhanced salt tolerance. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Antibiotic tolerance and microbial biofilms

DEFF Research Database (Denmark)

Folkesson, Anders

Increased tolerance to antimicrobial agents is thought to be an important feature of microbes growing in biofilms. We study the dynamics of antibiotic action within hydrodynamic flow chamber biofilms of Escherichia coli and Pseudomonas aeruginosa using isogenic mutants and fluorescent gene...... expression reporters and we address the question of how biofilm organization affects antibiotic susceptibility. The dynamics of microbial killing is monitored by viable count determination, and confocal laser microscopy. Our work shows that the apparent increased antibiotic tolerance is due to the formation...... of antibiotic tolerant subpopulations within the biofilm. The formation of these subpopulations is highly variable and dependent on the antibiotic used, the biofilm structural organization and the induction of specific tolerance mechanisms....

Theoretical considerations for SRAM total-dose hardening

International Nuclear Information System (INIS)

Francis, P.; Flandre, D.; Colinge, J.P.

1995-01-01

The theoretical hardness against total dose of the six-transistor SRAM cell is investigated in detail. An explicit analytical expression of the maximum tolerable threshold voltage shift is derived for two cross-coupled inverters. A numerical method is used to explore the hardness of the read and write operations. Both N- and P-channel access transistors designs are considered and their respective advantages are compared. The study points out that the radiation hardness mainly relies on the technology. Results obtained with the very robust Gate-All-Around process are finally presented

Proteomic analysis of a high aluminum tolerant yeast Rhodotorula taiwanensis RS1 in response to aluminum stress.

Science.gov (United States)

Wang, Chao; Wang, Chang Yi; Zhao, Xue Qiang; Chen, Rong Fu; Lan, Ping; Shen, Ren Fang

2013-10-01

Rhodotorula taiwanensis RS1 is a high-aluminum (Al)-tolerant yeast that can survive in Al concentrations up to 200mM. The mechanisms for the high Al tolerance of R. taiwanensis RS1 are not well understood. To investigate the molecular mechanisms underlying Al tolerance and toxicity in R. taiwanensis RS1, Al toxicity-induced changes in the total soluble protein profile were analyzed using two-dimensional gel electrophoresis (2-DE) coupled with mass spectrometry. A total of 33 differentially expressed proteins responding to Al stress were identified from approximately 850 reproducibly detected proteins. Among them, the abundance of 29 proteins decreased and 4 increased. In the presence of 100mM Al, the abundance of proteins involved in DNA transcription, protein translation, DNA defense, Golgi functions and glucose metabolism was decreased. By contrast, Al treatment led to increased abundance of malate dehydrogenase, which correlated with increased malate dehydrogenase activity and the accumulation of intracellular citrate, suggesting that Al-induced intracellular citrate could play an important role in detoxification of Al in R. taiwanensis RS1. © 2013.

Toleration out of respect?

DEFF Research Database (Denmark)

Lægaard, Sune

2014-01-01

be based on a modus vivendi designed to secure peaceful co-existence, but should be based on moral reasons. Forst therefore advances what he calls the ‘respect conception’ of toleration as an in itself morally desirable type of relationship, which is furthermore the only conception of toleration...

State Toleration, Religious Recognition and Equality

DEFF Research Database (Denmark)

Lægaard, Sune

2013-01-01

In debates about multiculturalism, it is widely claimed that ‘toleration is not enough’ and that we need to go ‘beyond toleration’ to some form of politics of recognition in order to satisfactorily address contemporary forms of cultural diversity (e.g. the presence in Europe of Muslim minorities...... a conceptual question of whether the relation between states and minorities can be categoriseized in terms of recognition or toleration, but about a normative question of whether and how toleration and recognition secures equality. When toleration is inadequate, this is often because it institutionaliseizes...... and upholds specific inequalities. But politics of recognition may equally well institute inequalities, and in such cases unequal recognition may not be preferable to toleration....

75 FR 17566 - Flutolanil; Pesticide Tolerances

Science.gov (United States)

2010-04-07

... ppm, and the greater tolerance value is needed to accommodate indirect residues from soybean..., and soybean hay at 2.5 ppm are being revoked since the same tolerance values are being established...; Pesticide Tolerances AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule. SUMMARY: This...

Regulatory focus affects physician risk tolerance.

Science.gov (United States)

Veazie, Peter J; McIntosh, Scott; Chapman, Benjamin P; Dolan, James G

2014-01-01

Risk tolerance is a source of variation in physician decision-making. This variation, if independent of clinical concerns, can result in mistaken utilization of health services. To address such problems, it will be helpful to identify nonclinical factors of risk tolerance, particularly those amendable to intervention-regulatory focus theory suggests such a factor. This study tested whether regulatory focus affects risk tolerance among primary care physicians. Twenty-seven primary care physicians were assigned to promotion-focused or prevention-focused manipulations and compared on the Risk Taking Attitudes in Medical Decision Making scale using a randomization test. Results provide evidence that physicians assigned to the promotion-focus manipulation adopted an attitude of greater risk tolerance than the physicians assigned to the prevention-focused manipulation (p = 0.01). The Cohen's d statistic was conventionally large at 0.92. Results imply that situational regulatory focus in primary care physicians affects risk tolerance and may thereby be a nonclinical source of practice variation. Results also provide marginal evidence that chronic regulatory focus is associated with risk tolerance (p = 0.05), but the mechanism remains unclear. Research and intervention targeting physician risk tolerance may benefit by considering situational regulatory focus as an explanatory factor.

Synthesis of Fault-Tolerant Embedded Systems

DEFF Research Database (Denmark)

Eles, Petru; Izosimov, Viacheslav; Pop, Paul

2008-01-01

This work addresses the issue of design optimization for fault- tolerant hard real-time systems. In particular, our focus is on the handling of transient faults using both checkpointing with rollback recovery and active replication. Fault tolerant schedules are generated based on a conditional...... process graph representation. The formulated system synthesis approaches decide the assignment of fault-tolerance policies to processes, the optimal placement of checkpoints and the mapping of processes to processors, such that multiple transient faults are tolerated, transparency requirements...

Tolerance-Based Feature Transforms

NARCIS (Netherlands)

Reniers, Dennie; Telea, Alexandru

2007-01-01

Tolerance-based feature transforms (TFTs) assign to each pixel in an image not only the nearest feature pixels on the boundary (origins), but all origins from the minimum distance up to a user-defined tolerance. In this paper, we compare four simple-to-implement methods for computing TFTs on binary

78 FR 18511 - Thiamethoxam; Pesticide Tolerances

Science.gov (United States)

2013-03-27

... Health Risk Assessment of New Uses on Strawberry, Pistachio, and Citrus; New Tolerance for Tea; and... Uses on Strawberry, Pistachio, and Citrus; New Tolerance for Tea; and Revised PHI and Tolerance for... ``Clothianidin--Aggregate Human Health Risk Assessment of New Uses on Strawberry, Pistachio, and Citrus; New...

Moisture-tolerant resin-based sealant: A boon

Directory of Open Access Journals (Sweden)

Prasanna Kumar Bhat

2013-01-01

Full Text Available Background and Objectives: Pit and fissure sealants are highly effective in preventing occlusal caries. The present study clinically evaluated and compared the retention and development of caries when sealed with moisture-tolerant resin-based sealant, conventional resin-based sealant with and without a bonding agent, and Glass Ionomer Cement Sealant in young permanent teeth. Materials and Methods: A total of 80 healthy cooperative children aged 6-9 years who were at high caries risk with all four newly erupted permanent first molars were included in the study. Teeth were divided into 4 groups using a full-factorial design, and each of the molars was sealed with the four different sealant material. Evaluation of sealant retention and development of caries was performed at 6 and 12 months using Modified Simonsen′s criteria. The data obtained were tabulated and subjected to statistical analysis using Kruskal-Wallis Test and Mann-Whitney Test. Result and Conclusion: The result from the present study indicated that moisture-tolerant resin-based sealant could be successfully used as a pit and fissure sealant because its hydrophilic chemistry makes it less technique sensitive and simplifies the sealant application procedure.

40 CFR 180.564 - Indoxacarb; tolerances for residues.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Indoxacarb; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.564 Indoxacarb; tolerances for residues. (a) General. Tolerances are established for residues of...

Cold stress alters transcription in meiotic anthers of cold tolerant chickpea (Cicer arietinum L.).

Science.gov (United States)

Sharma, Kamal Dev; Nayyar, Harsh

2014-10-11

Cold stress at reproductive phase in susceptible chickpea (Cicer arietinum L.) leads to pollen sterility induced flower abortion. The tolerant genotypes, on the other hand, produce viable pollen and set seed under cold stress. Genomic information on pollen development in cold-tolerant chickpea under cold stress is currently unavailable. DDRT-PCR analysis was carried out to identify anther genes involved in cold tolerance in chickpea genotype ICC16349 (cold-tolerant). A total of 9205 EST bands were analyzed. Cold stress altered expression of 127 ESTs (90 up-regulated, 37 down-regulated) in anthers, more than two third (92) of which were novel with unknown protein identity and function. Remaining about one third (35) belonged to several functional categories such as pollen development, signal transduction, ion transport, transcription, carbohydrate metabolism, translation, energy and cell division. The categories with more number of transcripts were carbohydrate/triacylglycerol metabolism, signal transduction, pollen development and transport. All but two transcripts in these categories were up-regulated under cold stress. To identify time of regulation after stress and organ specificity, expression levels of 25 differentially regulated transcripts were also studied in anthers at six time points and in four organs (anthers, gynoecium, leaves and roots) at four time points. Limited number of genes were involved in regulating cold tolerance in chickpea anthers. Moreover, the cold tolerance was manifested by up-regulation of majority of the differentially expressed transcripts. The anthers appeared to employ dual cold tolerance mechanism based on their protection from cold by enhancing triacylglycerol and carbohydrate metabolism; and maintenance of normal pollen development by regulating pollen development genes. Functional characterization of about two third of the novel genes is needed to have precise understanding of the cold tolerance mechanisms in chickpea anthers.

Cloning of genes and developing transgenic crops with enhanced tolerance to salinity and drought (abstract)

International Nuclear Information System (INIS)

Bansal, K.C.; Chinnusamy, V.; Tayal, D.; Das, A.; Goel, D.; Yadav, V.; Singh, A.K.; Lakhshmi, K.

2005-01-01

Abiotic stresses represent the most limiting factors affecting agricultural productivity. In India more than 60% of total cultivated land is still rainfed and crops experience frequent droughts. Thus, we need to develop transgenic crops tolerant to drought, and other related abiotic stress factors such as salinity, low and high temperature stresses. At the National Research Centre on Plant Biotechnology, Indian Agricultural Research Institute (ICAR), we have initiated a programme on developing transgenic crops tolerant to a range of abiotic stresses. The major emphasis is on developing transgenic potato, tomato, mustard, rice and wheat. While, transgenic plants of potato. tomato and mustard have already been generated with osmotin gene and are at different stages of testing, other key genes imparting tolerance to abiotic stresses are being isolated from different species for producing transgenic rice and wheat cultivars tolerant to multiple stresses. Genes that have been isolated in our laboratory include ascorbate peroxidase gene (TaApx) and genes encoding transcription factor, CBFs (TaCBF2 and TaCBP3) from a drought tolerant wheat cultivar (C306), Lea1 cDNA from Brassica species, codA from Arthrobacter globiformis, and otsBA operon from E. coli. Apart from these stress-related genes, we have isolated a few stress-inducible promoters for deploying them in gene stacking in developing transgenic crops with enhanced tolerance to multiple abiotic stresses. The results will be presented. (author)

The Cumulative Daily Tolerance Levels of Potentially Toxic Excipients Ethanol and Propylene Glycol Are Commonly Exceeded in Neonates and Infants

DEFF Research Database (Denmark)

Valeur, Kristine Svinning; Hertel, Steen Axel; Lundstrøm, Kaare Engell

2018-01-01

neonates and infants and compare these levels to the tolerance limits found in guidelines published by European Medicines Agency (EMA). As part of the SEEN study, all medicinal products administered to neonates and infants were recorded. All included neonates received ≥2 medicinal products/day and infants...... ≥3 medicinal products/day. Daily excipient levels were calculated based on quantities obtained from manufacturers or databases. Excipient levels were compared to tolerance limits proposed by the EMA. Altogether, 470 neonates and 160 infants were included, recording 4207 prescriptions and 316 products...... exceed tolerance limit of 6 mg/kg/day. Of the total number of prescriptions involving PG-containing medicinal products (n = 174), 70% would alone exceed a maximum tolerance limit of 50 mg/kg/day. Maximal daily exposure to ethanol (1563 mg/kg/day) or PG (954 mg/kg/day) exceeded the tolerance limits...

Tolerance – a Culturally Dependent Concept?

Directory of Open Access Journals (Sweden)

Trond Jørgensen

2014-12-01

Full Text Available This article presents research on Japanese interpretations of the first article of the Universal Declaration of Human Rights as a point of departure for discussing how the Japanese cultural contexts present an alternative understanding of tolerance to the Western liberal. According to Rainer Forst, tolerance is a normatively dependent concept (Forst 2010. This implies that the specific cultural values or the ‘normative context’ and environment become relevant. Since the praxis of tolerance always takes place in a specific cultural and moral environment, the cultural context influences how tolerance is carried out in practice as well as the norms defining its limits. Japanese informants held that cultural norms and values in Japan differ somewhat from those in the West. They perceived the human rights discourse as culturally dependent and culturally marked and clearly considered the first article of the Universal Declaration of Human Rights to be a product of Western thought. It states that ‘All human beings are born free and equal in dignity and rights. They are endowed with reason and conscience and should act towards one another in the spirit of brotherhood’ (United Nations 1948. While the role of tolerance in Western political philosophy seems to be attached to liberal values of autonomy and freedom, the Confucian-influenced environment in Japan places more emphasis on inter-dependency, cultivation, and learning social rules and proper-place-occupation as bases for moral conduct and deserving of respect. According to the Japanese informants, people are not ‘born with rights’ or ‘born free and equal’. Maintaining harmony, consensus, and proper behaviour according to relationships and hierarchy creates a different kind of setting for tolerance. The inter-dependent perspectives of Japanese culture may restrain freedom and can thus be expected to limit toleration of divergent views or behaviour. The culture-specific perception of

Genetic regulation of salt stress tolerance revealed by RNA-Seq in cotton diploid wild species, Gossypium davidsonii.

Science.gov (United States)

Zhang, Feng; Zhu, Guozhong; Du, Lei; Shang, Xiaoguang; Cheng, Chaoze; Yang, Bing; Hu, Yan; Cai, Caiping; Guo, Wangzhen

2016-02-03

Cotton is an economically important crop throughout the world, and is a pioneer crop in salt stress tolerance research. Investigation of the genetic regulation of salinity tolerance will provide information for salt stress-resistant breeding. Here, we employed next-generation RNA-Seq technology to elucidate the salt-tolerant mechanisms in cotton using the diploid cotton species Gossypium davidsonii which has superior stress tolerance. A total of 4744 and 5337 differentially expressed genes (DEGs) were found to be involved in salt stress tolerance in roots and leaves, respectively. Gene function annotation elucidated salt overly sensitive (SOS) and reactive oxygen species (ROS) signaling pathways. Furthermore, we found that photosynthesis pathways and metabolism play important roles in ion homeostasis and oxidation balance. Moreover, our studies revealed that alternative splicing also contributes to salt-stress responses at the posttranscriptional level, implying its functional role in response to salinity stress. This study not only provides a valuable resource for understanding the genetic control of salt stress in cotton, but also lays a substantial foundation for the genetic improvement of crop resistance to salt stress.

77 FR 49732 - Cyprodinil; Pesticide Tolerances

Science.gov (United States)

2012-08-17

.../puree (1x) and lemon/lime juice (1x) were used to modify the tolerance values. iii. Cancer. Based on the... the tolerance necessitate a higher value. Additionally, Codex has an established MRL on grape at 3 ppm...; Pesticide Tolerances AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule. SUMMARY: This...

Association analysis of salt tolerance in cowpea (Vigna unguiculata (L.) Walp) at germination and seedling stages.

Science.gov (United States)

Ravelombola, Waltram; Shi, Ainong; Weng, Yuejin; Mou, Beiquan; Motes, Dennis; Clark, John; Chen, Pengyin; Srivastava, Vibha; Qin, Jun; Dong, Lingdi; Yang, Wei; Bhattarai, Gehendra; Sugihara, Yuichi

2018-01-01

This is the first report on association analysis of salt tolerance and identification of SNP markers associated with salt tolerance in cowpea. Cowpea (Vigna unguiculata (L.) Walp) is one of the most important cultivated legumes in Africa. The worldwide annual production in cowpea dry seed is 5.4 million metric tons. However, cowpea is unfavorably affected by salinity stress at germination and seedling stages, which is exacerbated by the effects of climate change. The lack of knowledge on the genetic underlying salt tolerance in cowpea limits the establishment of a breeding strategy for developing salt-tolerant cowpea cultivars. The objectives of this study were to conduct association mapping for salt tolerance at germination and seedling stages and to identify SNP markers associated with salt tolerance in cowpea. We analyzed the salt tolerance index of 116 and 155 cowpea accessions at germination and seedling stages, respectively. A total of 1049 SNPs postulated from genotyping-by-sequencing were used for association analysis. Population structure was inferred using Structure 2.3.4; K optimal was determined using Structure Harvester. TASSEL 5, GAPIT, and FarmCPU involving three models such as single marker regression, general linear model, and mixed linear model were used for the association study. Substantial variation in salt tolerance index for germination rate, plant height reduction, fresh and dry shoot biomass reduction, foliar leaf injury, and inhibition of the first trifoliate leaf was observed. The cowpea accessions were structured into two subpopulations. Three SNPs, Scaffold87490_622, Scaffold87490_630, and C35017374_128 were highly associated with salt tolerance at germination stage. Seven SNPs, Scaffold93827_270, Scaffold68489_600, Scaffold87490_633, Scaffold87490_640, Scaffold82042_3387, C35069468_1916, and Scaffold93942_1089 were found to be associated with salt tolerance at seedling stage. The SNP markers were consistent across the three models and

Fault tolerant computing systems

International Nuclear Information System (INIS)

Randell, B.

1981-01-01

Fault tolerance involves the provision of strategies for error detection damage assessment, fault treatment and error recovery. A survey is given of the different sorts of strategies used in highly reliable computing systems, together with an outline of recent research on the problems of providing fault tolerance in parallel and distributed computing systems. (orig.)

Aboriginal Consumption of Estuarine Food Resources and Potential Implications for Health through Trace Metal Exposure; A Study in Gumbaynggirr Country, Australia.

Science.gov (United States)

Russell, Shaina; Sullivan, Caroline A; Reichelt-Brushett, Amanda J

2015-01-01

Fishing and resource use continues to be an essential aspect of life for many Aboriginal communities throughout Australia. It is important for dietary sustenance, and also retains deep social, cultural and economic significance, playing a fundamental role in maintaining group cohesion, transferring cultural knowledge and affirming Indigenous identities. We surveyed approximately 20% of the Gumbaynggirr Aboriginal community of Nambucca Heads, New South Wales, Australia. This paper explores Gumbaynggirr Connection to Country and engagement in cultural practice. It quantifies fishing efforts and consumption of seafood within the community. We found 95% of the sample group fish, with the highest rate of fishing being 2-3 times a week (27%). Furthermore, 98% of participants eat seafood weekly or more frequently, up to more than once a day (24%). Survey results revealed that Myxus elongatus (Sand mullet) and naturally recruited Saccostrea glomerata (Sydney rock oysters) continue to be important wild resources to the Gumbaynggirr community. Trace metals were measured in M. elongatus and S. glomerata samples collected by community participants in this study. Maximum levels prescribed in the Australia New Zealand Food Standards Code were not exceeded in the edible tissue for either species, however both species exceeded the generally expected levels for zinc and copper and S. glomerata samples exceeded the generally expected level for selenium. Furthermore the average dietary exposure to trace metals from consuming seafood was calculated for the surveyed population. Trace metal intake was then compared to the provisional tolerable weekly intake prescribed by the Joint Expert Committee on Food Additives. This process revealed that copper and selenium intake were both within the provisional tolerable weekly intake, while there is no guideline for zinc. Furthermore, participants relying heavily on wild resources from the Nambucca River estuary may exceed the provisional

Aboriginal Consumption of Estuarine Food Resources and Potential Implications for Health through Trace Metal Exposure; A Study in Gumbaynggirr Country, Australia.

Directory of Open Access Journals (Sweden)

Shaina Russell

Full Text Available Fishing and resource use continues to be an essential aspect of life for many Aboriginal communities throughout Australia. It is important for dietary sustenance, and also retains deep social, cultural and economic significance, playing a fundamental role in maintaining group cohesion, transferring cultural knowledge and affirming Indigenous identities. We surveyed approximately 20% of the Gumbaynggirr Aboriginal community of Nambucca Heads, New South Wales, Australia. This paper explores Gumbaynggirr Connection to Country and engagement in cultural practice. It quantifies fishing efforts and consumption of seafood within the community. We found 95% of the sample group fish, with the highest rate of fishing being 2-3 times a week (27%. Furthermore, 98% of participants eat seafood weekly or more frequently, up to more than once a day (24%. Survey results revealed that Myxus elongatus (Sand mullet and naturally recruited Saccostrea glomerata (Sydney rock oysters continue to be important wild resources to the Gumbaynggirr community. Trace metals were measured in M. elongatus and S. glomerata samples collected by community participants in this study. Maximum levels prescribed in the Australia New Zealand Food Standards Code were not exceeded in the edible tissue for either species, however both species exceeded the generally expected levels for zinc and copper and S. glomerata samples exceeded the generally expected level for selenium. Furthermore the average dietary exposure to trace metals from consuming seafood was calculated for the surveyed population. Trace metal intake was then compared to the provisional tolerable weekly intake prescribed by the Joint Expert Committee on Food Additives. This process revealed that copper and selenium intake were both within the provisional tolerable weekly intake, while there is no guideline for zinc. Furthermore, participants relying heavily on wild resources from the Nambucca River estuary may exceed the

Algorithms for worst-case tolerance optimization

DEFF Research Database (Denmark)

Schjær-Jacobsen, Hans; Madsen, Kaj

1979-01-01

New algorithms are presented for the solution of optimum tolerance assignment problems. The problems considered are defined mathematically as a worst-case problem (WCP), a fixed tolerance problem (FTP), and a variable tolerance problem (VTP). The basic optimization problem without tolerances...... is denoted the zero tolerance problem (ZTP). For solution of the WCP we suggest application of interval arithmetic and also alternative methods. For solution of the FTP an algorithm is suggested which is conceptually similar to algorithms previously developed by the authors for the ZTP. Finally, the VTP...... is solved by a double-iterative algorithm in which the inner iteration is performed by the FTP- algorithm. The application of the algorithm is demonstrated by means of relatively simple numerical examples. Basic properties, such as convergence properties, are displayed based on the examples....

Transcriptomic study to understand thermal adaptation in a high temperature-tolerant strain of Pyropia haitanensis.

Science.gov (United States)

Wang, Wenlei; Teng, Fei; Lin, Yinghui; Ji, Dehua; Xu, Yan; Chen, Changsheng; Xie, Chaotian

2018-01-01

Pyropia haitanensis, a high-yield commercial seaweed in China, is currently undergoing increasing levels of high-temperature stress due to gradual global warming. The mechanisms of plant responses to high temperature stress vary with not only plant type but also the degree and duration of high temperature. To understand the mechanism underlying thermal tolerance in P. haitanensis, gene expression and regulation in response to short- and long-term temperature stresses (SHS and LHS) was investigated by performing genome-wide high-throughput transcriptomic sequencing for a high temperature tolerant strain (HTT). A total of 14,164 differential expression genes were identified to be high temperature-responsive in at least one time point by high-temperature treatment, representing 41.10% of the total number of unigenes. The present data indicated a decrease in the photosynthetic and energy metabolic rates in HTT to reduce unnecessary energy consumption, which in turn facilitated in the rapid establishment of acclimatory homeostasis in its transcriptome during SHS. On the other hand, an increase in energy consumption and antioxidant substance activity was observed with LHS, which apparently facilitates in the development of resistance against severe oxidative stress. Meanwhile, ubiquitin-mediated proteolysis, brassinosteroids, and heat shock proteins also play a vital role in HTT. The effects of SHS and LHS on the mechanism of HTT to resist heat stress were relatively different. The findings may facilitate further studies on gene discovery and the molecular mechanisms underlying high-temperature tolerance in P. haitanensis, as well as allow improvement of breeding schemes for high temperature-tolerant macroalgae that can resist global warming.

Total lymphoid irradiation

International Nuclear Information System (INIS)

Anon.

1980-01-01

An outline review notes recent work on total lymphoid irradiation (TLI) as a means of preparing patients for grafts and particularly for bone-marrow transplantation. T.L.I. has proved immunosuppressive in rats, mice, dogs, monkeys and baboons; when given before bone-marrow transplantation, engraftment took place without, or with delayed rejection or graft-versus-host disease. Work with mice has indicated that the thymus needs to be included within the irradiation field, since screening of the thymus reduced skin-graft survival from 50 to 18 days, though irradiation of the thymus alone has proved ineffective. A more lasting tolerance has been observed when T.L.I. is followed by an injection of donor bone marrow. 50% of mice treated in this way accepted allogenic skin grafts for more than 100 days, the animals proving to be stable chimeras with 50% of their peripheral blood lymphocytes being of donor origin. Experiments of a similar nature with dogs and baboons were not so successful. (U.K.)

Cyanobacteria-mediated phenylpropanoids and phytohormones in rice (Oryza sativa) enhance plant growth and stress tolerance.

Science.gov (United States)

Singh, Dhananjaya P; Prabha, Ratna; Yandigeri, Mahesh S; Arora, Dilip K

2011-11-01

Phenylpropanoids, flavonoids and plant growth regulators in rice (Oryza sativa) variety (UPR 1823) inoculated with different cyanobacterial strains namely Anabaena oryzae, Anabaena doliolum, Phormidium fragile, Calothrix geitonos, Hapalosiphon intricatus, Aulosira fertilissima, Tolypothrix tenuis, Oscillatoria acuta and Plectonema boryanum were quantified using HPLC in pot conditions after 15 and 30 days. Qualitative analysis of the induced compounds using reverse phase HPLC and further confirmation with LC-MS/MS showed consistent accumulation of phenolic acids (gallic, gentisic, caffeic, chlorogenic and ferulic acids), flavonoids (rutin and quercetin) and phytohormones (indole acetic acid and indole butyric acid) in rice leaves. Plant growth promotion (shoot, root length and biomass) was positively correlated with total protein and chlorophyll content of leaves. Enzyme activity of peroxidase and phenylalanine ammonia lyase and total phenolic content was fairly high in rice leaves inoculated with O. acuta and P. boryanum after 30 days. Differential systemic accumulation of phenylpropanoids in plant leaves led us to conclude that cyanobacterial inoculation correlates positively with plant growth promotion and stress tolerance in rice. Furthermore, the study helped in deciphering possible mechanisms underlying plant growth promotion and stress tolerance in rice following cyanobacterial inoculation and indicated the less explored avenue of cyanobacterial colonization in stress tolerance against abiotic stress.

The moderating and mediating roles of self-acceptance and tolerance to others in the relationship between mindfulness and subjective well-being.

Science.gov (United States)

Xu, Wei; Oei, Tian Ps; Liu, Xinghua; Wang, Xiaoming; Ding, Chen

2016-07-01

This study explored the moderating and mediating influences of self-acceptance and tolerance to others in the relationship between mindfulness and subjective well-being. In total, 301 (130 males) university students completed the Five-Facet Mindfulness Questionnaire, Index of Well-being, Self-acceptance Questionnaire, and Tolerance Scale. The results showed that the positive link between mindfulness and subjective well-being was significantly mediated by self-acceptance only. Tolerance played a moderating role. The implications of the results for relevant research and mindfulness training were discussed. © The Author(s) 2014.

75 FR 26673 - Clethodim; Pesticide Tolerances

Science.gov (United States)

2010-05-12

... regulation establishes tolerances for residues of clethodim in or on the raw agricultural commodity artichoke... clethodim, in or on the raw agricultural commodity artichoke, globe at 1.3 parts per million (ppm... bushberry subgroup 13-07B tolerance from 3.0 ppm to 0.20 ppm and the globe artichoke tolerance from 1.3 ppm...

15 CFR 750.11 - Shipping tolerances.

Science.gov (United States)

2010-01-01

... in the ECCN applicable to your item reads “ $ value” or “in $ value”, there is no shipping tolerance... is no shipping tolerance with respect to the number of units. However, the value of all of your... shipping tolerance on this license because the items are controlled by an ECCN where “$ value” is the...

Resistance of transplantation tolerance to X-irradiation

Energy Technology Data Exchange (ETDEWEB)

Holan, V; Hasek, M; Chutna, J [Czechoslovak Academy of Sciences, Prague. Institute of Molecular Genetics

1979-04-01

With regard to the previous finding that suppressor cells participating in the state of transplantation tolerance were radiosensitive, the possibility was investigated whether tolerance can be abolished by irradiation. In the rat model used (AVN recipients, Lewis donors), both neonatally induced tolerance and tolerance induced in the adult life by the transfer of suppressor cells were found to be radioresistant.

Potential of Pteris vittata L. for phytoremediation of sites co-contaminated with cadmium and arsenic: the tolerance and accumulation.

Science.gov (United States)

Xiao, Xiyuan; Chen, Tongbin; An, Zhizhuang; Lei, Mei; Huang, Zechun; Liao, Xiaoyong; Liu, Yingru

2008-01-01

Field investigation and greenhouse experiments were conducted to study the tolerance of Pteris vittata L. (Chinese brake) to cadmium (Cd) and its feasibility for remediating sites co-contaminated with Cd and arsenic (As). The results showed that P. vittata could survive in pot soils spiked with 80 mg/kg of Cd and tolerated as great as 301 mg/kg of total Cd and 26.8 mg/kg of diethyltriaminepenta acetic acid (DTPA)-extractable Cd under field conditions. The highest concentration of Cd in fronds was 186 mg/kg under a total soil concentration of 920 mg As/kg and 98.6 mg Cd/kg in the field, whereas just 2.6 mg/kg under greenhouse conditions. Ecotypes of P. vittata were differentiated in tolerance and accumulation of Cd, and some of them could not only tolerate high concentrations of soil Cd, but also accumulated high concentrations of Cd in their fronds. Arsenic uptake and transportation by P. vittata was not inhibited at lower levels (< or = 20 mg/kg) of Cd addition. Compared to the treatment without addition of Cd, the frond As concentration was increased by 103.8% at 20 mg Cd/kg, with the highest level of 6434 mg/kg. The results suggested that the Cd-tolerant ecotype of P. vittata extracted effectively As and Cd from the site co-contaminated with Cd and As, and might be used to remediate and revegetate this type of site.

Venlafaxine prevents morphine antinociceptive tolerance: The role of neuroinflammation and the l-arginine-nitric oxide pathway.

Science.gov (United States)

Mansouri, Mohammad Taghi; Naghizadeh, Bahareh; Ghorbanzadeh, Behnam; Alboghobeish, Soheila; Amirgholami, Neda; Houshmand, Gholamreza; Cauli, Omar

2018-05-01

Opioid-induced neuroinflammation and the nitric oxide (NO) signal-transduction pathway are involved in the development of opioid analgesic tolerance. The antidepressant venlafaxine (VLF) modulates NO in nervous tissues, and so we investigated its effect on induced tolerance to morphine, neuroinflammation, and oxidative stress in mice. Tolerance to the analgesic effects of morphine were induced by injecting mice with morphine (50 mg/kg) once a day for three consecutive days; the effect of co-administration of VLF (5 or 40 mg/kg) with morphine was similarly tested in a separate group. To determine if the NO precursor l-arginine hydrochloride (l-arg) or NO are involved in the effects rendered by VLF, animals were pre-treated with l-arg (200 mg/kg), or the NO synthesis inhibitors N(ω)-nitro-l-arginine methyl ester (L-NAME; 30 mg/kg) or aminoguanidine hydrochloride (AG; 100 mg/kg), along with VLF (40 mg/kg) for three days before receiving morphine for another three days. Nociception was assessed with a hot-plate test on the fourth day, and the concentration of tumor necrosis factor alpha (TNF-α), interleukin-1beta (IL-1β), interleukin-6 (IL-6), interleukin-10, brain-derived neurotrophic factor, NO, and oxidative stress factors such as total thiol, malondialdehyde content, and glutathione peroxidase (GPx) activity in the brain was also determined. Co-administration of VLF with morphine attenuated morphine-induced analgesic tolerance and prevented the upregulation of proinflammatory cytokines (TNF-α, IL-1β, and IL-6), NO, and malondialdehyde in brains of mice with induced morphine tolerance; chronic VLF administration inhibited this decrease in brain-derived neurotrophic factor, total thiol, and GPx levels. Moreover, repeated administration of l-arg before receipt of VLF antagonized the effects induced by VLF, while L-NAME and AG potentiated these effects. VLF attenuates morphine-induced analgesic tolerance, at least partly because of its anti

Assertiveness and tolerance in cross-cultural interaction

Directory of Open Access Journals (Sweden)

Pochebut L.G.

2017-10-01

Full Text Available The article is devoted to the theoretical analysis of the concepts of tolerance and assertiveness. Problem of contemporary cross-cultural interaction is the need to shift strategy of tolerance on strategy of assertiveness. Considered the practice of multiculturalism based on the idea of tolerance. Six barriers to cross-cultural communication. Comparison of understanding tolerance in European, Arab, Eastern cultures and in Russia. Boundaries are considered manifestations of tolerance. Developed rules of tolerant behavior. Proposed in scientific analysis and in actual practice, intercultural strategy move to assertiveness. Tolerance is respect for the views of another person, provided that he respects your opinion. Assertiveness is the respect for the rights of another person, provided that it also respects your rights. Describes the ways in assertive behavior: the willingness to cooperate, the openness of conduct, allocation of responsibilities, defend their rights and interests, defining the way forward. Tactics developed in assertive behavior: “interests”, “anti-discrimination”, “achievement”, “standards”, “activity”, “goodwill”.

Tolerance and chimerism.

Science.gov (United States)

Kolb, Hans-Jochem; Guenther, Wolfgang; Gyurkocza, Boglarka; Hoetzl, Florian; Simoes, Belinda; Falk, Christine; Schleuning, Michael; Ledderose, Georg

2003-05-15

Stem-cell transplantation from human leukocyte antigen (HLA)-haploidentical family members carries a high risk of rejection and graft-versus-host disease (GVHD) if donor and recipient differ by more than one HLA antigen. The authors have developed treatment protocols from studies in dog leukocyte antigen-haploidentical dogs that prevent rejection and modify GVHD to the extent that patients with aggressive hematologic neoplasia can be treated with success. Principal improvements have been achieved in the use of cyclophosphamide and total-body irradiation for conditioning and T-cell depletion for prevention of GVHD. More recently, the combination of marrow and CD6-depleted mobilized donor blood cells (MDBC) has been introduced for HLA-haploidentical transplantation on the basis that CD6-depleted MDBC contain immunoregulatory cells besides stem cells and natural killer cells. Clinical results are reported on 36 patients with high-risk hematologic neoplasia. The results encourage the use of HLA-haploidentical stem-cell transplantation at an earlier stage of the disease. This method could also be of use for tolerance induction in organ transplantation.

Cadmium tolerance and antibiotic resistance in Escherichia coli isolated from waste stabilization ponds.

Science.gov (United States)

Patra, Sova; Das, T K; Avila, C; Cabello, V; Castillo, F; Sarkar, D; Lahiri, Susmita; Jana, B B

2012-04-01

The incidence pattern of cadmium tolerance and antibiotics resistance by Escherichia coli was examined periodically from the samples of water, sludge and intestine of fish raised in waste stabilization ponds in a sewage treatment plant. Samples of water and sludge were collected from all the selected ponds and were monitored for total counts of fecal coliform (FC), total coliform (TC) and the population of Escherichia coli, which was also obtained from the intestine of fishes. Total counts of both FC and TC as well as counts of E. coli were markedly reduced from the facultative pond to the last maturation pond. Tolerance limit to cadmium by E. coli tended to decline as the distance of the sewage effluent from the source increased; the effective lethal concentration of cadmium ranged from 0.1 mM in split chamber to 0.05 mM in first maturation pond. E. coli isolated from water, sludge and fish gut were sensitive to seven out of ten antibiotics tested. It appears that holistic functions mediated through the mutualistic growth of micro algae and heterotrophic bacteria in the waste stabilization ponds were responsible for the promotion of water quality and significant reduction of coliform along the sewage effluent gradient.

Studies of tolerance induction through mixed chimerism in cynomolgus monkeys. Method for detection of chimeric cells and effect of thymic irradiation on induction of tolerance

International Nuclear Information System (INIS)

Hoshino, Tomoaki; Kawai, Tatsuo; Ota, Kazuo

1996-01-01

To establish the method for the detection of chimerism in cynomologus monkeys, we tested cross reactivity of various anti-HLA monoclonal antibodies (mAb) to cynomolgus monkeys. In 29 mAb we tested, only three monoclonal anti-HLA antibodies crossreacted with lymphocytes of monkeys. With these mAb, chimeric cell can be detected up to 1% by flow cytometric analysis (study 1). Utilizing the method we developed in study 1, we applied the regimen that induces mixed chimerism and skin graft tolerance in mice to renal allotransplantation of cynomolgus monkey. Regimen A includes non-lethal dose of total body irradiation (TBI), administration of anti-thymocyte globulin (ATG) for 3 days, donor bone marrow infusion and 45 days course of cyclosporine (CYA) administration. We added 7 Gy of thymic irradiation on day-6 in regimen B and on day-1 in regimen C. Although all monkeys in regimen A and B consistently developed chimerism, they rejected kidney allografts soon after stopping CYA. In contrast, 4 monkeys out of 5 failed to develop chimerism in regimen C, but renal allograft tolerance was induced in one monkey who developed chimerism in regimen C. In conclusion, the induction of chimerism is considered necessary but not sufficient for tolerance induction. (author)

Studies of tolerance induction through mixed chimerism in cynomolgus monkeys. Method for detection of chimeric cells and effect of thymic irradiation on induction of tolerance

Energy Technology Data Exchange (ETDEWEB)

Hoshino, Tomoaki; Kawai, Tatsuo; Ota, Kazuo [Tokyo Women`s Medical Coll. (Japan)

1996-12-01

To establish the method for the detection of chimerism in cynomologus monkeys, we tested cross reactivity of various anti-HLA monoclonal antibodies (mAb) to cynomolgus monkeys. In 29 mAb we tested, only three monoclonal anti-HLA antibodies crossreacted with lymphocytes of monkeys. With these mAb, chimeric cell can be detected up to 1% by flow cytometric analysis (study 1). Utilizing the method we developed in study 1, we applied the regimen that induces mixed chimerism and skin graft tolerance in mice to renal allotransplantation of cynomolgus monkey. Regimen A includes non-lethal dose of total body irradiation (TBI), administration of anti-thymocyte globulin (ATG) for 3 days, donor bone marrow infusion and 45 days course of cyclosporine (CYA) administration. We added 7 Gy of thymic irradiation on day-6 in regimen B and on day-1 in regimen C. Although all monkeys in regimen A and B consistently developed chimerism, they rejected kidney allografts soon after stopping CYA. In contrast, 4 monkeys out of 5 failed to develop chimerism in regimen C, but renal allograft tolerance was induced in one monkey who developed chimerism in regimen C. In conclusion, the induction of chimerism is considered necessary but not sufficient for tolerance induction. (author)

Reliability and Validity of the Persian Version of Distress Tolerance Scale

Directory of Open Access Journals (Sweden)

Ali Reza Azizi

2010-11-01

Full Text Available "nObjectives: This study aims to assess the validity and reliability of the  Persian version of  Simons and Gaher `s Distress Tolerance scale(DTS by administering it  to nicotine dependent students of Tehran University. "nMethod:In a descriptive cross-sectional study, 317 nicotine dependent students of  Tehran  University who were selected ,using  available sampling method, completed DTS, Coping with Stress- Revised(CS-R, Positive and Negative Affect Scales(PANAS and Fagerstrom Test  for Nicotine Dependence(FTND.  Data were analyzed using descriptive statistic methods and correlation coefficient. "nResults: The alpha coefficients for Tolerance, Absorption, Appraisal and Regulation subscales were 0.75, 0.77, 0.70 and 0.75, respectively. The test-retest correlation coefficients with two months interval for Tolerance, Absorption, Appraisal  and Regulation subscales and the total scale were 0.71, 0.69, 0.77, 0,73 and 0.79, respectively; all of which were statistically significant (p<0.001. The correlation coefficient of  DTS with problem-focused, emotional-focused, less useful and insufficient coping with stress were found to be:  0.213, -0.278, -0.337 and -0.196.  In addition, the correlation coefficient of  DTS with positive emotion, negative emotion and smoking-dependency were 0.543, -0.224 and -0.653 which were also significant(p<0.05. "nConclusion: the DTS is valid and reliable and suitable to use for assessing distress tolerance.

Metabolic observations during the treatment of obese patients by periods of total starvation

NARCIS (Netherlands)

Riet, H.G. van; Schwarz, F.; Kinderen, P.J. der; Veeman, W.

Ten very obese female patients were treated by periods of total starvation lasting 10 days each. In the interval between these starvation periods, a diet of 600 calories was given. Twenty-one periods were completed, 6 patients went through 3 periods each. The fasting was generally well tolerated;

Pavlovian control of cross-tolerance between pentobarbital and ethanol.

Science.gov (United States)

Cappell, H; Roach, C; Poulos, C X

1981-01-01

Tolerance to several effects of a number of drugs has been shown to depend on Pavlovian conditioning processes. Experiment I extended the compensatory conditioning model (Siegel 1975) to tolerance to the hypothermic effect of pentobarbital (30 mg/kg). In Experiment I, rats that acquired hypothermic tolerance in one environment did not display tolerance when tested in an environment not previously associated with drug administration. In Experiment II, rats were made tolerant to the hypothermic effect of pentobarbital (30 mg/kg) and tested for cross-tolerance to ethanol (2.5 g/kg). Cross-tolerance was observed, but it was significantly reduced if the test was in an environment different from the one in which tolerance to pentobarbital was originally acquired. Thus, the compensatory conditioning model accounts for at least part of the tolerance and cross-tolerance to the thermic effects of alcohol and pentobarbital. The physiological processes in the CNS underlying tolerance and cross-tolerance for these drugs, therefore, are controlled by associative processes.

Establishing soil loss tolerance: an overview

Directory of Open Access Journals (Sweden)

Costanza Di Stefano

2016-09-01

Full Text Available Soil loss tolerance is a criterion for establishing if a soil is potentially subjected to erosion risk, productivity loss and if a river presents downstream over-sedimentation or other off-site effects are present at basin scale. At first this paper reviews the concept of tolerable soil loss and summarises the available definitions and the knowledge on the recommended values and evaluating criteria. Then a threshold soil loss value, at the annual temporal scale, established for limiting riling was used for defining the classical soil loss tolerance. Finally, some research needs on tolerable soil loss are listed.

In vitro screening of potato genotypes for osmotic stress tolerance

Directory of Open Access Journals (Sweden)

Gelmesa Dandena

2017-02-01

Full Text Available Potato (Solanum tuberosum L. is a cool season crop which is susceptible to both drought and heat stresses. Lack of suitable varieties of the crop adapted to drought-prone areas of the lowland tropics deprives farmers living in such areas the opportunity to produce and use the crop as a source of food and income. As a step towards developing such varieties, the present research was conducted to evaluate different potato genotypes for osmotic stress tolerance under in vitro conditions and identify drought tolerant genotypes for future field evaluation. The experiment was carried out at the Leibniz University of Hannover, Germany, by inducing osmotic stress using sorbitol at two concentrations (0.1 and 0.2 M in the culture medium. A total of 43 genotypes collected from different sources (27 advanced clones from CIP, nine improved varieties, and seven farmers’ cultivars were used in a completely randomized design with four replications in two rounds. Data were collected on root and shoot growth. The results revealed that the main effects of genotype, sorbitol treatment, and their interactions significantly (P < 0.01 influenced root and shoot growthrelated traits. Under osmotic stress, all the measured root and shoot growth traits were significantly correlated. The dendrogram obtained from the unweighted pair group method with arithmetic mean allowed grouping of the genotypes into tolerant, moderately tolerant, and susceptible ones to a sorbitol concentration of 0.2 M in the culture medium. Five advanced clones (CIP304350.100, CIP304405.47, CIP392745.7, CIP388676.1, and CIP388615.22 produced shoots and rooted earlier than all other genotypes, with higher root numbers, root length, shoot and root mass under osmotic stress conditions induced by sorbitol. Some of these genotypes had been previously identified as drought-tolerant under field conditions, suggesting the capacity of the in vitro evaluation method to predict drought stress tolerant

Provisional in-silico biopharmaceutics classification (BCS) to guide oral drug product development.

Science.gov (United States)

Wolk, Omri; Agbaria, Riad; Dahan, Arik

2014-01-01

The main objective of this work was to investigate in-silico predictions of physicochemical properties, in order to guide oral drug development by provisional biopharmaceutics classification system (BCS). Four in-silico methods were used to estimate LogP: group contribution (CLogP) using two different software programs, atom contribution (ALogP), and element contribution (KLogP). The correlations (r(2)) of CLogP, ALogP and KLogP versus measured LogP data were 0.97, 0.82, and 0.71, respectively. The classification of drugs with reported intestinal permeability in humans was correct for 64.3%-72.4% of the 29 drugs on the dataset, and for 81.82%-90.91% of the 22 drugs that are passively absorbed using the different in-silico algorithms. Similar permeability classification was obtained with the various in-silico methods. The in-silico calculations, along with experimental melting points, were then incorporated into a thermodynamic equation for solubility estimations that largely matched the reference solubility values. It was revealed that the effect of melting point on the solubility is minor compared to the partition coefficient, and an average melting point (162.7 °C) could replace the experimental values, with similar results. The in-silico methods classified 20.76% (± 3.07%) as Class 1, 41.51% (± 3.32%) as Class 2, 30.49% (± 4.47%) as Class 3, and 6.27% (± 4.39%) as Class 4. In conclusion, in-silico methods can be used for BCS classification of drugs in early development, from merely their molecular formula and without foreknowledge of their chemical structure, which will allow for the improved selection, engineering, and developability of candidates. These in-silico methods could enhance success rates, reduce costs, and accelerate oral drug products development.

Study of calcium-dependent lead-tolerance on plants differing in their level of Ca-deficiency tolerance

International Nuclear Information System (INIS)

Antosiewicz, Danuta Maria

2005-01-01

The main aim of the study was to determine the role of calcium in the amelioration of lead toxic effects in plants with accordingly high/low level of Pb-tolerance and high/low Ca-deficiency tolerance. The study was performed on maize, rye, tomato and mustard. Plants were cultivated in modified Knop's solution. They were subjected to Ca-deficiency, and to lead nitrate administered in the presence of four calcium nitrate concentrations 3.0, 2.4, 1.2, 0.3 mM. Lead-tolerance and tolerance to Ca-deficiency were determined, as were concentration of the studied elements in plant tissues, and the Pb deposition pattern at the ultrastructural level (electron microscopy study, X-ray microanalysis). In all studied plants, lead toxicity increased as medium calcium content decreased, however, only in the Ca-deficiency sensitive mustard with low Pb-tolerance was it accompanied by a rise in tissue lead concentration. In contrast, lead root and shoot levels did not increase in the highly Ca-deficiency tolerant tomato, mustard and rye with high Pb-tolerance irrespective of the Ca 2+ regimens applied. Thus, in these plants, lead's unfavourable effects resulted only from the higher toxicity of the same amount of lead in tissues at low calcium in the medium. Of particular relevance is the finding by electron microscopy and X-ray microanalysis, that under low calcium in both highly Ca-deficiency tolerant and Ca-deficiency sensitive plants, less efficient Pb 2+ detoxification was accompanied by the restriction of the formation of large lead deposits in cell walls. Obtained results are novel in demonstrating calcium involvement in the lead deposition in the cell wall, thus in the regulation of the internal lead detoxification. - Calcium regulated lead deposition in cell walls of plants

Phase-II trial of fractionated total body radiation in bone marrow transplantation for acute leukemia

International Nuclear Information System (INIS)

Gale, R.P.; Opelz, G.; Feig, S.

1979-01-01

The addition of low doses of fractionated total body irradiation and a radiosensitizing agent to more conventional doses of total body irradiation was well tolerated but did not improve the antileukemic effect. The DAFT regimen was not associated with a higher incidence of GVHD or interstitial pneumonitis. This observation has led us to consider escalation of the dose of FTBI in our next clinical trial

Transgenic Alfalfa Plants Expressing the Sweetpotato Orange Gene Exhibit Enhanced Abiotic Stress Tolerance

Science.gov (United States)

Wang, Zhi; Ke, Qingbo; Kim, Myoung Duck; Kim, Sun Ha; Ji, Chang Yoon; Jeong, Jae Cheol; Lee, Haeng-Soon; Park, Woo Sung; Ahn, Mi-Jeong; Li, Hongbing; Xu, Bingcheng; Deng, Xiping; Lee, Sang-Hoon; Lim, Yong Pyo; Kwak, Sang-Soo

2015-01-01

Alfalfa (Medicago sativa L.), a perennial forage crop with high nutritional content, is widely distributed in various environments worldwide. We recently demonstrated that the sweetpotato Orange gene (IbOr) is involved in increasing carotenoid accumulation and enhancing resistance to multiple abiotic stresses. In this study, in an effort to improve the nutritional quality and environmental stress tolerance of alfalfa, we transferred the IbOr gene into alfalfa (cv. Xinjiang Daye) under the control of an oxidative stress-inducible peroxidase (SWPA2) promoter through Agrobacterium tumefaciens-mediated transformation. Among the 11 transgenic alfalfa lines (referred to as SOR plants), three lines (SOR2, SOR3, and SOR8) selected based on their IbOr transcript levels were examined for their tolerance to methyl viologen (MV)-induced oxidative stress in a leaf disc assay. The SOR plants exhibited less damage in response to MV-mediated oxidative stress and salt stress than non-transgenic plants. The SOR plants also exhibited enhanced tolerance to drought stress, along with higher total carotenoid levels. The results suggest that SOR alfalfa plants would be useful as forage crops with improved nutritional value and increased tolerance to multiple abiotic stresses, which would enhance the development of sustainable agriculture on marginal lands. PMID:25946429

Tolerability to beta-blocker therapy among heart failure patients in clinical practice.

Science.gov (United States)

Butler, Javed; Khadim, Ghazanfar; Belue, Rhonda; Chomsky, Don; Dittus, Robert S; Griffin, Marie; Wilson, John R

2003-06-01

Although beta-blockers were well-tolerated by heart failure (HF) patients in clinical trials, tolerability of these drugs in a general population of HF patients is not well-described. We studied a total of 308 encounters with beta-blockers therapy in 268 ambulatory HF patients. Side effects and frequency and predictors of discontinuation of therapy were studied. Independent predictors of discontinuation were assessed. Weight gain (59%), fatigue (56%), dizziness (41%), and dyspnea (29%) were the most common side effects. Fifty-one patients (19%) were discontinued on therapy with any 1 particular beta-blocker. Fatigue (30%) and hypotension (28%) were the most common reasons for discontinuation. Forty (78%) of these were given a trial with a different beta-blocker. Of these, 22 (55%) attempts with a different beta-blocker were tolerated. Thus the overall absolute discontinuation rate was only 7% for patients who were given a trial with different beta-blockers or 11% for the entire study population. Independent predictors of discontinuation of therapy included advanced symptoms, nonischemic etiology, history of pulmonary disease, and higher diuretic doses. Side effects with beta-blockers in a general population of HF patients are common; however, with changes in medical management, most patients can tolerate them eventually. In case of intolerance to one kind, a trial with a different beta-blocker is indicated.

Tolerant Paternalism: Pro-ethical Design as a Resolution of the Dilemma of Toleration.

Science.gov (United States)

Floridi, Luciano

2016-12-01

Toleration is one of the fundamental principles that inform the design of a democratic and liberal society. Unfortunately, its adoption seems inconsistent with the adoption of paternalistically benevolent policies, which represent a valuable mechanism to improve individuals' well-being. In this paper, I refer to this tension as the dilemma of toleration. The dilemma is not new. It arises when an agent A would like to be tolerant and respectful towards another agent B's choices but, at the same time, A is altruistically concerned that a particular course of action would harm, or at least not improve, B's well-being, so A would also like to be helpful and seeks to ensure that B does not pursue such course of action, for B's sake and even against B's consent. In the article, I clarify the specific nature of the dilemma and show that several forms of paternalism, including those based on ethics by design and structural nudging, may not be suitable to resolve it. I then argue that one form of paternalism, based on pro-ethical design, can be compatible with toleration and hence with the respect for B's choices, by operating only at the informational and not at the structural level of a choice architecture. This provides a successful resolution of the dilemma, showing that tolerant paternalism is not an oxymoron but a viable approach to the design of a democratic and liberal society.

Mechanical tolerance stackup and analysis

CERN Document Server

Fischer, Bryan R

2011-01-01

Use Tolerance Analysis Techniques to Avoid Design, Quality, and Manufacturing Problems Before They Happen Often overlooked and misunderstood, tolerance analysis is a critical part of improving products and their design processes. Because all manufactured products are subject to variation, it is crucial that designers predict and understand how these changes can affect form, fit, and function of parts and assemblies--and then communicate their findings effectively. Written by one of the developers of ASME Y14.5 and other geometric dimension and tolerancing (GD&T) standards, Mechanical Tolerance

The antianginal efficacy and tolerability of controlled-release metoprolol once daily

DEFF Research Database (Denmark)

Egstrup, K; Gundersen, T; Härkönen, R

1988-01-01

In a randomized, double-blind, cross-over study treatment with a new controlled-release (CR) preparation of metoprolol, given once daily, was compared with treatment with conventional metoprolol tablets, given twice daily, in 115 patients with stable effort angina pectoris. The patients were...... questionnaire. When all patients were analysed together there were no differences in antianginal efficacy between the two treatment regimens. However, when the group taking 200 mg daily was analysed separately better exercise tolerance was found during metoprolol CR therapy, as measured by onset of chest pain...... and ST-segment change, compared with conventional metoprolol therapy. The two formulations were well tolerated. When given once daily in a total daily dose of 100 mg, the CR preparation induced less adverse effects than the conventional tablets, 50 mg twice daily. It was concluded that the new metoprolol...

Antibiogram and heavy metal tolerance of bullfrog bacteria in Malaysia

OpenAIRE

Tee, L.W.; Najiah, M.

2011-01-01

Bacterial isolates from 30 farmed bullfrogs (Lithobates catesbeianus) weighing 500-600 g at Johore, Malaysia with external clinical signs of ulcer, red leg and torticollis were tested for their antibiograms and heavy metal tolerance patterns. A total of 17 bacterial species with 77 strains were successfully isolated and assigned to 21 antibiotics and 4 types of heavy metal (Hg2+, Cr6+, Cd2+, Cu2+). Results revealed that bacteria were resistant against lincomycin (92%), oleandomycin (72.7%) an...

SIFT - Design and analysis of a fault-tolerant computer for aircraft control. [Software Implemented Fault Tolerant systems

Science.gov (United States)

Wensley, J. H.; Lamport, L.; Goldberg, J.; Green, M. W.; Levitt, K. N.; Melliar-Smith, P. M.; Shostak, R. E.; Weinstock, C. B.

1978-01-01

SIFT (Software Implemented Fault Tolerance) is an ultrareliable computer for critical aircraft control applications that achieves fault tolerance by the replication of tasks among processing units. The main processing units are off-the-shelf minicomputers, with standard microcomputers serving as the interface to the I/O system. Fault isolation is achieved by using a specially designed redundant bus system to interconnect the processing units. Error detection and analysis and system reconfiguration are performed by software. Iterative tasks are redundantly executed, and the results of each iteration are voted upon before being used. Thus, any single failure in a processing unit or bus can be tolerated with triplication of tasks, and subsequent failures can be tolerated after reconfiguration. Independent execution by separate processors means that the processors need only be loosely synchronized, and a novel fault-tolerant synchronization method is described.

40 CFR 180.586 - Clothianidin; tolerances for residues.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Clothianidin; tolerances for residues... § 180.586 Clothianidin; tolerances for residues. (a) General. Tolerances are established for residues of the insecticide clothianidin, including its metabolites and degradates. Compliance with the tolerance...

Historical Aspects in Tolerance Phenomenon Research

Directory of Open Access Journals (Sweden)

Janat A. Karmanova

2013-01-01

Full Text Available The article examines the historical aspect of the tolerance phenomenon research, particularly the study of tolerance in the age of Antiquity, Middle Ages, New Times, Enlightenment. It is remarkable that the problem of tolerance, emerged in Western civilization on religious grounds, laid the foundation for all other freedoms, attained in many countries. Besides, the article attaches special attention to the researchers of the East, such as Abu Nasr al-Farabi, Khoja Ahmed Yasawi, studies the historical aspect of works by Kazakhstan thinkers A. Kunanbayev, C. Valikhanova, K.B. Zharikbayev, S.K. Kaliyev, A.N. Nysanbayev, A.I. Artemev and others. The analysis of historical research of the tolerance phenomenon brings the author to the conclusion that religious freedom was the starting point for the emergence of new areas of tolerance display. The content of this phenomenon changed according to the historical peculiarities of the societies’ development

Microbial stress tolerance for biofuels. Systems biology

Energy Technology Data Exchange (ETDEWEB)

Liu, Zonglin Lewis (ed.) [National Center for Agricultural Utilization Research, USDA-ARS, Peoria, IL (United States)

2012-07-01

The development of sustainable and renewable biofuels is attracting growing interest. It is vital to develop robust microbial strains for biocatalysts that are able to function under multiple stress conditions. This Microbiology Monograph provides an overview of methods for studying microbial stress tolerance for biofuels applications using a systems biology approach. Topics covered range from mechanisms to methodology for yeast and bacteria, including the genomics of yeast tolerance and detoxification; genetics and regulation of glycogen and trehalose metabolism; programmed cell death; high gravity fermentations; ethanol tolerance; improving biomass sugar utilization by engineered Saccharomyces; the genomics on tolerance of Zymomonas mobilis; microbial solvent tolerance; control of stress tolerance in bacterial host organisms; metabolomics for ethanologenic yeast; automated proteomics work cell systems for strain improvement; and unification of gene expression data for comparable analyses under stress conditions. (orig.)

Fault-tolerant rotary actuator

Science.gov (United States)

Tesar, Delbert

2006-10-17

A fault-tolerant actuator module, in a single containment shell, containing two actuator subsystems that are either asymmetrically or symmetrically laid out is provided. Fault tolerance in the actuators of the present invention is achieved by the employment of dual sets of equal resources. Dual resources are integrated into single modules, with each having the external appearance and functionality of a single set of resources.

Salt acclimation process: a comparison between a sensitive and a tolerant Olea europaea cultivar.

Science.gov (United States)

Pandolfi, Camilla; Bazihizina, Nadia; Giordano, Cristiana; Mancuso, Stefano; Azzarello, Elisa

2017-03-01

Saline soils are highly heterogeneous in time and space, and this is a critical factor influencing plant physiology and productivity. Temporal changes in soil salinity can alter plant responses to salinity, and pre-treating plants with low NaCl concentrations has been found to substantially increase salt tolerance in different species in a process called acclimation. However, it still remains unclear whether this process is common to all plants or is only expressed in certain genotypes. We addressed this question by assessing the physiological changes to 100 mM NaCl in two contrasting olive cultivars (the salt-sensitive Leccino and the salt-tolerant Frantoio), following a 1-month acclimation period with 5 or 25 mM NaCl. The acclimation improved salt tolerance in both cultivars, but activated substantially different physiological adjustments in the tolerant and the sensitive cultivars. In the tolerant Frantoio the acclimation with 5 mM NaCl was more effective in increasing plant salt tolerance, with a 47% increase in total plant dry mass compared with non-acclimated saline plants. This enhanced biomass accumulation was associated with a 50% increase in K+ retention ability in roots. On the other hand, in the sensitive Leccino, although the acclimation process did not improve performance in terms of plant growth, pre-treatment with 5 and 25 mM NaCl substantially decreased salt-induced leaf cell ultrastructural changes, with leaf cell relatively similar to those of control plants. Taken together these results suggest that in the tolerant cultivar the acclimation took place primarily in the root tissues, while in the sensitive they occurred mainly at the shoot level. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

TaALMT1 promoter sequence compositions, acid tolerance, and Al tolerance in wheat cultivars and landraces from Sichuan in China.

Science.gov (United States)

Han, C; Dai, S F; Liu, D C; Pu, Z J; Wei, Y M; Zheng, Y L; Wen, D J; Zhao, L; Yan, Z H

2013-11-18

Previous genetic studies on wheat from various sources have indicated that aluminum (Al) tolerance may have originated independently in USA, Brazil, and China. Here, TaALMT1 promoter sequences of 92 landraces and cultivars from Sichuan, China, were sequenced. Five promoter types (I', II, III, IV, and V) were observed in 39 cultivars, and only three promoter types (I, II, and III) were observed in 53 landraces. Among the wheat collections worldwide, only the Chinese Spring (CS) landrace native to Sichuan, China, carried the TaALMT1 promoter type III. Besides CS, two other Sichuan-bred landraces and six cultivars with TaALMT1 promoter type III were identified in this study. In the phylogenetic tree constructed based on the TaALMT1 promoter sequences, type III formed a separate branch, which was supported by a high bootstrap value. It is likely that TaALMT1 promoter type III originated from Sichuan-bred wheat landraces of China. In addition, the landraces with promoter type I showed the lowest Al tolerance among all landraces and cultivars. Furthermore, the cultivars with promoter type IV showed better Al tolerance than landraces with promoter type II. A comparison of acid tolerance and Al tolerance between cultivars and landraces showed that the landraces had better acid tolerance than the cultivars, whereas the cultivars showed better Al tolerance than the landraces. Moreover, significant difference in Al tolerance was also observed between the cultivars raised by the National Ministry of Agriculture and by Sichuan Province. Among the landraces from different regions, those from the East showed better acid tolerance and Al tolerance than those from the South and West of Sichuan. Additional Al-tolerant and acid-tolerant wheat lines were also identified.

Recipient dendritic cells, but not B cells, are required antigen-presenting cells for peripheral alloreactive CD8+ T-cell tolerance.

Science.gov (United States)

Mollov, J L; Lucas, C L; Haspot, F; Gaspar, J Kurtz C; Guzman, A; Sykes, M

2010-03-01

Induction of mixed allogeneic chimerism is a promising approach for achieving donor-specific tolerance, thereby obviating the need for life-long immunosuppression for solid organ allograft acceptance. In mice receiving a low dose (3Gy) of total body irradiation, allogeneic bone marrow transplantation combined with anti-CD154 tolerizes peripheral CD4 and CD8 T cells, allowing achievement of mixed chimerism with specific tolerance to donor. With this approach, peripheral CD8 T-cell tolerance requires recipient MHC class II, CD4 T cells, B cells and DCs. Recipient-type B cells from chimeras that were tolerant to donor still promoted CD8 T-cell tolerance, but their role could not be replaced by donor-type B cells. Using recipients whose B cells or DCs specifically lack MHC class I and/or class II or lack CD80 and CD86, we demonstrate that dendritic cells (DCs) must express CD80/86 and either MHC class I or class II to promote CD8 tolerance. In contrast, B cells, though required, did not need to express MHC class I or class II or CD80/86 to promote CD8 tolerance. Moreover, recipient IDO and IL-10 were not required. Thus, antigen presentation by recipient DCs and not by B cells is critical for peripheral alloreactive CD8 T cell tolerance.

Incorporating Fault Tolerance Tactics in Software Architecture Patterns

NARCIS (Netherlands)

Harrison, Neil B.; Avgeriou, Paris

2008-01-01

One important way that an architecture impacts fault tolerance is by making it easy or hard to implement measures that improve fault tolerance. Many such measures are described as fault tolerance tactics. We studied how various fault tolerance tactics can be implemented in the best-known

Breaking Immunological Tolerance through OX40 (CD134

Directory of Open Access Journals (Sweden)

Pratima Bansal-Pakala

2001-01-01

Full Text Available Immunological tolerance represents a mechanism by which cells of the host remain protected from the immune system. Breaking of immunological tolerance can result in a variety of autoimmune diseases such as rheumatoid arthritis, diabetes, and multiple sclerosis. The reasons for tolerance breaking down and autoimmune processes arising are largely unknown but of obvious interest for therapeutic intervention of these diseases. Although reversal of the tolerant state is generally unwanted, there are instances where this may be of benefit to the host. In particular, one way a cancerous cell escapes being targeted by the immune system is through tolerance mechanisms that in effect turn off the reactivity of T lymphocytes that can respond to tumor-associated peptides. Thus tolerance represents a major obstacle in developing effective immunotherapy against tumors. The molecules that are involved in regulating immunological tolerance are then of interest as they may be great targets for positively or negatively manipulating the tolerance process.

Degree of Fault Tolerance as a Comprehensive Parameter for Reliability Evaluation of Fault Tolerant Electric Traction Drives

Directory of Open Access Journals (Sweden)

Igor Bolvashenkov

2016-09-01

Full Text Available This paper describes a new approach and methodology of quantitative assessment of the fault tolerance of electric power drive consisting of the multi-phase traction electric motor and multilevel electric inverter. It is suggested to consider such traction drive as a system with several degraded states. As a comprehensive parameter for evaluating of the fault tolerance, it is proposed to use the criterion of degree of the fault tolerance. For the approbation of the proposed method, the authors carried out research and obtained results of its practical application for evaluating the fault tolerance of the power train of an electrical helicopter.

7 CFR 51.346 - Tolerances.

Science.gov (United States)

2010-01-01

... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... Standards for Grades of Apples for Processing Tolerances § 51.346 Tolerances. When a lot of apples is...

7 CFR 51.306 - Tolerances.

Science.gov (United States)

2010-01-01

... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946... Standards for Grades of Apples Tolerances § 51.306 Tolerances. In order to allow for variations incident to...

Legal Quality, Inequality, and Tolerance

DEFF Research Database (Denmark)

Bjørnskov, Christian

Previous findings suggest that income inequality leads to lower legal quality. This paper argues that voters' tolerance of inequality exerts an additional influence. Empirical findings suggest that inequality leads to lower legal quality due to its effect on trust while the tolerance of inequality...

Legal Quality, Inequality, and Tolerance

DEFF Research Database (Denmark)

Bjørnskov, Christian

2004-01-01

Previous findings suggest that income inequality leads to lower legal quality. This paper argues that voters' tolerance of inequality exerts an additional influence. Empirical findings suggest that inequality leads to lower legal quality due to its effect on trust while the tolerance of inequality...

Advanced cloud fault tolerance system

Science.gov (United States)

Sumangali, K.; Benny, Niketa

2017-11-01

Cloud computing has become a prevalent on-demand service on the internet to store, manage and process data. A pitfall that accompanies cloud computing is the failures that can be encountered in the cloud. To overcome these failures, we require a fault tolerance mechanism to abstract faults from users. We have proposed a fault tolerant architecture, which is a combination of proactive and reactive fault tolerance. This architecture essentially increases the reliability and the availability of the cloud. In the future, we would like to compare evaluations of our proposed architecture with existing architectures and further improve it.

Unraveling the mechanism responsible for the contrasting tolerance of Synechocystis and Synechococcus to Cr(VI): Enzymatic and non-enzymatic antioxidants

Energy Technology Data Exchange (ETDEWEB)

Gupta, Alka [Molecular Biology Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India); Ballal, Anand, E-mail: aballal@barc.gov.in [Molecular Biology Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India); Homi Bhabha National Institute, Training School Complex, Anushakti Nagar, Mumbai 40085 (India)

2015-07-15

Highlights: • Cr(VI) accumulation generates higher ROS in Synechocystis than in Synechococcus. • Synechococcus exhibits better photosynthetic activity in response to Cr(VI). • Synechococcus has higher enzymatic/non-enzymatic antioxidants than Synechocystis. • Synechococcus shows better tolerance to other oxidative stresses than Synechocystis. • Differential detoxification of ROS is responsible for the contrasting tolerance to Cr(VI) - Abstract: Two unicellular cyanobacteria, Synechocystis and Synechococcus, showed contrasting tolerance to Cr(VI); with Synechococcus being 12-fold more tolerant than Synechocystis to potassium dichromate. The mechanism responsible for this differential sensitivity to Cr(VI) was explored in this study. Total content of photosynthetic pigments as well as photosynthetic activity decreased at lower concentration of Cr(VI) in Synechocystis as compared to Synechococcus. Experiments with {sup 51}Cr showed Cr to accumulate intracellularly in both the cyanobacteria. At lower concentrations, Cr(VI) caused excessive ROS generation in Synechocystis as compared to that observed in Synechococcus. Intrinsic levels of enzymatic antioxidants, i.e., superoxide dismutase, catalase and 2-Cys-peroxiredoxin were considerably higher in Synechococcus than Synechocystis. Content of total thiols (both protein as well as non-protein) and reduced glutathione (GSH) was also higher in Synechococcus as compared to Synechocystis. This correlated well with higher content of carbonylated proteins observed in Synechocystis than Synechococcus. Additionally, in contrast to Synechocystis, Synechococcus exhibited better tolerance to other oxidative stresses like high intensity light and H{sub 2}O{sub 2}. The data indicate that the disparity in the ability to detoxify ROS could be the primary mechanism responsible for the differential tolerance of these cyanobacteria to Cr(VI)

PMS49 – Empirical comparison of discrete choice experiment and best-worst scaling to estimate stakeholders' risk tolerance for hip replacement surgery

NARCIS (Netherlands)

van Dijk, J.D.; Groothuis-Oudshoorn, Karin; Marshall, D.; IJzerman, Maarten Joost

2013-01-01

Objectives Empirical comparison of two preference elicitation methods, discrete choice experiment (DCE) and profile case best-worst scaling (BWS), regarding the estimation of the risk tolerance for hip replacement surgery (total hip arthroplasty and total hip resurfacing arthroplasty). Methods An

QTLs for tolerance of drought and breeding for tolerance of abiotic and biotic stress: an integrated approach.

Directory of Open Access Journals (Sweden)

Shalabh Dixit

Full Text Available BACKGROUND: The coupling of biotic and abiotic stresses leads to high yield losses in rainfed rice (Oryza sativa L. growing areas. While several studies target these stresses independently, breeding strategies to combat multiple stresses seldom exist. This study reports an integrated strategy that combines QTL mapping and phenotypic selection to develop rice lines with high grain yield (GY under drought stress and non-stress conditions, and tolerance of rice blast. METHODOLOGY: A blast-tolerant BC2F3-derived population was developed from the cross of tropical japonica cultivar Moroberekan (blast- and drought-tolerant and high-yielding indica variety Swarna (blast- and drought-susceptible through phenotypic selection for blast tolerance at the BC2F2 generation. The population was studied for segregation distortion patterns and QTLs for GY under drought were identified along with study of epistatic interactions for the trait. RESULTS: Segregation distortion, in favour of Moroberekan, was observed at 50 of the 59 loci. Majority of these marker loci co-localized with known QTLs for blast tolerance or NBS-LRR disease resistance genes. Despite the presence of segregation distortion, high variation for DTF, PH and GY was observed and several QTLs were identified under drought stress and non-stress conditions for the three traits. Epistatic interactions were also detected for GY which explained a large proportion of phenotypic variance observed in the population. CONCLUSIONS: This strategy allowed us to identify QTLs for GY along with rapid development of high-yielding purelines tolerant to blast and drought with considerably reduced efforts. Apart from this, it also allowed us to study the effects of the selection cycle for blast tolerance. The developed lines were screened at IRRI and in the target environment, and drought and blast tolerant lines with high yield were identified. With tolerance to two major stresses and high yield potential, these

Enhancing drought tolerance in C(4) crops.

Science.gov (United States)

Lopes, Marta S; Araus, Jose Luis; van Heerden, Philippus D R; Foyer, Christine H

2011-05-01

Adaptation to abiotic stresses is a quantitative trait controlled by many different genes. Enhancing the tolerance of crop plants to abiotic stresses such as drought has therefore proved to be somewhat elusive in terms of plant breeding. While many C(4) species have significant agronomic importance, most of the research effort on improving drought tolerance has focused on maize. Ideally, drought tolerance has to be achieved without penalties in yield potential. Possibilities for success in this regard are highlighted by studies on maize hybrids performed over the last 70 years that have demonstrated that yield potential and enhanced stress tolerance are associated traits. However, while our understanding of the molecular mechanisms that enable plants to tolerate drought has increased considerably in recent years, there have been relatively few applications of DNA marker technologies in practical C(4) breeding programmes for improved stress tolerance. Moreover, until recently, targeted approaches to drought tolerance have concentrated largely on shoot parameters, particularly those associated with photosynthesis and stay green phenotypes, rather than on root traits such as soil moisture capture for transpiration, root architecture, and improvement of effective use of water. These root traits are now increasingly considered as important targets for yield improvement in C(4) plants under drought stress. Similarly, the molecular mechanisms underpinning heterosis have considerable potential for exploitation in enhancing drought stress tolerance. While current evidence points to the crucial importance of root traits in drought tolerance in C(4) plants, shoot traits may also be important in maintaining high yields during drought.

TOLERANCE: FEATURES AND PROBLEMS OF EVALUATION

Directory of Open Access Journals (Sweden)

M. V. Karmanov

2018-01-01

Full Text Available In the media and in specialized literature, publications related to attempts to assess the place and role of tolerance in the life of modern society are increasingly encountered. In this connection, a comprehensive scientific analysis of tolerance as an independent and distinctive object of applied research is of great scientific and practical interest. Considering the points of view on the category of "tolerance" gave grounds to believe that there are a number of "white spots" and gaps of methodological nature that do not allow collecting reliable information and identify the main indicators characterizing the state and features of the transformation of tolerance as a social norm reflecting changes in society's value orientations . Tolerance as a characteristic of the moral state of society is a "medal with two sides": on the one hand, it is positive that it promotes mutual understanding, taking into account the recognition of rights and freedoms, with the coordination of different motives, attitudes and orientations without violence and suppression of human dignity, allows to smooth existing irreconcilable interethnic, interethnic, racial contradictions; on the other negative, because it can be perceived as permissiveness, and instill indifference to values. All of the above was justification for the need to present in the article a critical analysis of approaches to the definition and directions of the study of tolerance, which made it possible to reveal its principal features as a complex and multifaceted object of statistical research. In order to implement the principle of objectivity of conclusions, the study was conducted using the following methods: analysis and synthesis, comparison and comparison, generalization, the method of scientific abstraction. The article presents a substantiation of the possibilities of making a quantitative assessment of changes in tolerance in time, taking into account the analysis of information sources

Social Studies Teachers’ Perceptions of Tolerance

Directory of Open Access Journals (Sweden)

Hatice Türe

2014-10-01

Full Text Available Problem: Tolerance is one of the values which citizens should have in today's multicultural and democratic society. Educational system should teach tolerance to the individuals in a democratic society. Tolerance can be given through curricula in educational process. Social studies is one of the courses for conducting tolerance education. Skills and perspectives of teachers are important for tolerance education in social studies. The purpose of this study is to understand social studies teachers' perceptions of tolerance. Method: In the study, qualitative research method and phenomenology that is one of the qualitative research designs was employed. The participants were determined using criterion sampling. 10 social studies teachers graduated from social studies education departments working at schools of Eskisehir Provincial Directorate of National Education participated in the study. The research process consisted of two phases. The data were gathered through semi-structured interviews. The interviews were conducted in two steps in order to make an in-depth analysis. In Phase I of the study, semi-structured interviews were conducted with 10 teachers in December and January months during the 2012-2013 school year. The data obtained from the first interviews were also the base for the questions in the second interviews. In Phase II of the study, semi-structured interviews were again conducted with 10 teachers who participated in the first interviews in April and May months during the 2012-2013 school year. Teacher Interview Form-1 in the first interviews and Teacher Interview Form-2 in the second interviews were used for data collection. As for data analysis, thematic analysis technique was used. The data were analysed, the findings were defined and interpreted based on the research questions. Findings: The findings of the study revealed that the social studies teachers described tolerance as respecting ideas, values, beliefs and behaviors

A Theory of Tolerance

OpenAIRE

Corneo, Giacomo; Jeanne, Olivier

2006-01-01

We develop an economic theory of tolerance where styles of behaviour are invested with symbolic value. Value systems are endogenous and taught by parents to their children. In conjunction with actual behaviour, value systems determine the esteem enjoyed by individuals. Intolerant individuals have all symbolic value invested in a single style of behaviour, whereas tolerant people have diversified values. The proposed model identifies a link between the unpredictability of children's lifestyles...

Use of an Intra-Arterial Catheter as a Provisional Conduit for Regulated Outflow Management in the Setting of Artery-Only Digital Replantation.

Science.gov (United States)

DeFazio, Michael V; Han, Kevin D; Paryavi, Ebrahim

2017-12-01

Successful replantation of distal digital segments necessitates the establishment of sufficient outflow to minimize congestion and progressive tissue necrosis. In cases where only arterial anastomosis is feasible, an artificial outlet must be provided to maintain physiological requirements until microvenous circulation regenerates. This can be accomplished using any number of "exsanguination techniques" designed to facilitate egress through ongoing passive blood loss. Although reportedly effective, these measures are imprecise and carry a substantial risk of infection, scarring, and/or uncontrolled hemorrhage. Herein, we describe a preemptive alternative for provisional venous drainage, whereby direct catheterization of a distal arterial branch is used to enhance the precision of outflow management following artery-only digital replantation. The establishment of intravascular access, using the technique described, permits remote manipulation of the microcirculatory environment through timed administration of heparinized saline and regulated removal of controlled volumes of blood.

Metabolic adaption of ethanol-tolerant Clostridium thermocellum.

Directory of Open Access Journals (Sweden)

Xinshu Zhu

Full Text Available Clostridium thermocellum is a major candidate for bioethanol production via consolidated bioprocessing. However, the low ethanol tolerance of the organism dramatically impedes its usage in industry. To explore the mechanism of ethanol tolerance in this microorganism, systematic metabolomics was adopted to analyse the metabolic phenotypes of a C. thermocellum wild-type (WT strain and an ethanol-tolerant strain cultivated without (ET0 or with (ET3 3% (v/v exogenous ethanol. Metabolomics analysis elucidated that the levels of numerous metabolites in different pathways were changed for the metabolic adaption of ethanol-tolerant C. thermocellum. The most interesting phenomenon was that cellodextrin was significantly more accumulated in the ethanol-tolerant strain compared with the WT strain, although cellobiose was completely consumed in both the ethanol-tolerant and wild-type strains. These results suggest that the cellodextrin synthesis was active, which might be a potential mechanism for stress resistance. Moreover, the overflow of many intermediate metabolites, which indicates the metabolic imbalance, in the ET0 cultivation was more significant than in the WT and ET3 cultivations. This indicates that the metabolic balance of the ethanol-tolerant strain was adapted better to the condition of ethanol stress. This study provides additional insight into the mechanism of ethanol tolerance and is valuable for further metabolic engineering aimed at higher bioethanol production.

Different cultivation methods to acclimatise ammonia-tolerant methanogenic consortia.

Science.gov (United States)

Tian, Hailin; Fotidis, Ioannis A; Mancini, Enrico; Angelidaki, Irini

2017-05-01

Bioaugmentation with ammonia tolerant-methanogenic consortia was proposed as a solution to overcome ammonia inhibition during anaerobic digestion process recently. However, appropriate technology to generate ammonia tolerant methanogenic consortia is still lacking. In this study, three basic reactors (i.e. batch, fed-batch and continuous stirred-tank reactors (CSTR)) operated at mesophilic (37°C) and thermophilic (55°C) conditions were assessed, based on methane production efficiency, incubation time, TAN/FAN (total ammonium nitrogen/free ammonia nitrogen) levels and maximum methanogenic activity. Overall, fed-batch cultivation was clearly the most efficient method compared to batch and CSTR. Specifically, by saving incubation time up to 150%, fed-batch reactors were acclimatised to nearly 2-fold higher FAN levels with a 37%-153% methanogenic activity improvement, compared to batch method. Meanwhile, CSTR reactors were inhibited at lower ammonia levels. Finally, specific methanogenic activity test showed that hydrogenotrophic methanogens were more active than aceticlastic methanogens in all FAN levels above 540mgNH 3 -NL -1 . Copyright © 2017 Elsevier Ltd. All rights reserved.

75 FR 68214 - Flubendiamide; Pesticide Tolerances; Technical Correction

Science.gov (United States)

2010-11-05

... typographical errors in the referenced rule, specifically, to revise incorrect tolerance values for the... tolerance value for the established tolerances for corn, field, grain (0.02 ppm); corn, field, stover (0.15... field trial and processing data, these tolerance values should be revised to 0.03 ppm; 15 ppm; 25 ppm...

Shaping tolerant attitudes towards immigrants

DEFF Research Database (Denmark)

Rapp, Carolin

2017-01-01

This article contributes to the ongoing discussion on how tolerance may be fostered in Western European countries and to the question of how contextual factors such as welfare state expenditures may contribute to this formation. Tolerance is understood as a basic democratic principle that helps c...

Variable Levels of Tolerance to Water Stress (Drought and Associated Biochemical Markers in Tunisian Barley Landraces

Directory of Open Access Journals (Sweden)

Sameh Dbira

2018-03-01

Full Text Available Due to its high tolerance to abiotic stress, barley (Hordeum vulgare is cultivated in many arid areas of the world. In the present study, we evaluate the tolerance to water stress (drought in nine accessions of “Ardhaoui” barley landraces from different regions of Tunisia. The genetic diversity of the accessions is evaluated with six SSR markers. Seedlings from the nine accessions are subjected to water stress by completely stopping irrigation for three weeks. A high genetic diversity is detected among the nine accessions, with no relationships between genetic distance and geographical or ecogeographical zone. The analysis of growth parameters and biochemical markers in the water stress-treated plants in comparison to their respective controls indicated great variability among the studied accessions. Accession 2, from El May Island, displayed high tolerance to drought. Increased amounts of proline in water-stressed plants could not be correlated with a better response to drought, as the most tolerant accessions contained lower levels of this osmolyte. A good correlation was established between the reduction of growth and degradation of chlorophylls and increased levels of malondialdehyde and total phenolics. These biochemical markers may be useful for identifying drought tolerant materials in barley.

Population structure, genetic variation and linkage disequilibrium in perennial ryegrass populations divergently selected for freezing tolerance

Directory of Open Access Journals (Sweden)

Mallikarjuna Rao eKovi

2015-11-01

Full Text Available Low temperature is one of the abiotic stresses seriously affecting the growth of perennial ryegrass (Lolium perenne L. Understanding the genetic control of freezing tolerance would aid in the development of cultivars of perennial ryegrass with improved adaptation to frost. A total number of 80 individuals (24 of High frost [HF]; 29 of Low frost [LF] and 27 of Unselected [US] from the second generation of the two divergently selected populations and an unselected control population were genotyped using 278 genome-wide SNPs derived from Lolium perenne L. transcriptome sequence. Our studies showed that the HF and LF populations are very divergent after selection for freezing tolerance, whereas the HF and US populations are more similar. Linkage disequilibrium (LD decay varied across the seven chromosomes and the conspicuous pattern of LD between the HF and LF population confirmed their divergence in freezing tolerance. Furthermore, two Fst outlier methods; finite island model (fdist by LOSITAN and hierarchical structure model using ARLEQUIN detected six loci under directional selection. These outlier loci are most probably linked to genes involved in freezing tolerance, cold adaptation and abiotic stress and might be the potential marker resources for breeding perennial ryegrass cultivars with improved freezing tolerance.

Pavlovian conditioning analysis of morphine tolerance.

Science.gov (United States)

Siegel, S

1978-01-01

It has been demonstrated that many conditional responses to a variety of drugs are opposite in direction to the unconditional effects of the drug, and the conditioning analysis of morphine tolerance emphasizes the fact that subjects with a history of morphine administration display morphine-compensatory conditional responses when confronted with the usual administration procedure but without the drug. Thus, when the drug is presented in the context of the usual administration cues, these conditional morphine-compensatory responses would be expected to attenuate the drug-induced unconditional responses, thereby decreasing the observed response to the drug. Research has been summarized which supports this compensatory conditioning model of tolerance by demonstrating that the display of tolerance is specific to the environment in which the drug has been previously administered. Further evidence supporting this theory of tolerance has been provided by studies establishing that extinction, partial reinforcement, and latent inhibition--non-pharmacological manipulations known to be effective in generally affecting the display of conditional responses--similarly affect the display of morphine tolerance. Additional research has suggested many parallels between learning and morphine tolerance: Both processes exhibit great retention, both are disrupted by electroconvulsive shock and frontal cortical stimulation, both are retarded by inhibitors of protein synthesis, and both are facilitated by antagonists of these metabolic inhibitors.

Kidney allograft tolerance in diabetic patients after total lymphoid irradiation (TLI)

Energy Technology Data Exchange (ETDEWEB)

Ang, K.K.; Vanrenterighem, Y.; Waer, M.; Michielsen, P.; Schueren, E. van der (University Hospital St. Rafael, Leuven (Belgium)); Vandeputte, M. (Louvain Univ. (Belgium). Rega Institute for Medical Research)

1985-04-01

The value of total lymphoid irradiation (TLI) combined with low dose prednisone as sole immunosuppressive regimen in renal allograft transplantation in humans has been investigated. Seventeen patients with end-stage diabetic nephropathy received TLI to a cumulative dose of 20-30 Gy in fractions of 1 Gy. Cadaver kidneys were grafted as soon as they were available after completion of TLI. Profound and long-term immunosuppression has been achieved in 17 patients. Six patients live already more than one year and 7 for less than one year with a functioning kidney graft. One patient returned to chronic hemodialysis 11 months after transplantation and died of pericardial tamponade one month later. One patient had severe acute rejection for which cyclosporine A was administered; he died of septic shock as a consequence of immune deficiency a month later. The other two patients succumbed to other causes (myocardial infarction and hyperglycemia).

High Efficiency, Low EMI and Positioning Tolerant Wireless Charging of EVs

Energy Technology Data Exchange (ETDEWEB)

Chabaan, Rakan [Hyundai American Technical Center Inc. (HATCI), Superior Twp, MI (United States)

2017-12-01

The objective of this project is to develop, implement, and demonstrate a wireless power transfer (WPT) system that is capable of the following metrics: Total system efficiencies of more than 85 percent with minimum 20 cm coil-to-coil gap; System output power at least 6.6 kW; but design system up to 19.2 kW for future higher power study; Maximum lateral positioning tolerance achievable while meeting regulatory emission guidelines.

7 CFR 801.8 - Tolerances for sieves.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Tolerances for sieves. 801.8 Section 801.8 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD... FOR GRAIN INSPECTION EQUIPMENT § 801.8 Tolerances for sieves. The maintenance tolerances for sieves...

Glycogen synthase kinase-3 regulates inflammatory tolerance in astrocytes

Science.gov (United States)

Beurel, Eléonore; Jope, Richard S.

2010-01-01

Inflammatory tolerance is the down-regulation of inflammation upon repeated stimuli, which is well-established to occur in peripheral immune cells. However, less is known about inflammatory tolerance in the brain although it may provide an important protective mechanism from detrimental consequences of prolonged inflammation, which appears to occur in many psychiatric and neurodegenerative conditions. Array analysis of 308 inflammatory molecules produced by mouse primary astrocytes after two sequential stimulations with lipopolysaccharide (LPS) distinguished three classes, tolerant, sensitized and unaltered groups. For many of these inflammatory molecules, inhibition of glycogen synthase kinase-3 (GSK3) increased tolerance and reduced sensitization. Focusing on LPS-tolerance in interleukin-6 (IL-6) production, we found that microglia exhibited a strong tolerance response that matched that of macrophages, whereas astrocytes exhibited only partial tolerance. The astrocyte semi-tolerance was found to be regulated by GSK3. GSK3 inhibitors or knocking down GSK3 levels promoted LPS-tolerance and astrocytes expressing constitutively active GSK3 did not develop LPS-tolerance. These findings identify the critical role of GSK3 in counteracting IL-6 inflammatory tolerance in cells of the CNS, supporting the therapeutic potential of GSK3 inhibitors to reduce neuroinflammation by promoting tolerance. PMID:20553816

Effect of anoxia on the electroretinogram of three anoxia-tolerant vertebrates.

Science.gov (United States)

Stensløkken, Kåre-Olav; Milton, Sarah L; Lutz, Peter L; Sundin, Lena; Renshaw, Gillian M C; Stecyk, Jonathan A W; Nilsson, Göran E

2008-08-01

To survive anoxia, neural ATP levels have to be defended. Reducing electrical activity, which accounts for 50% or more of neural energy consumption, should be beneficial for anoxic survival. The retina is a hypoxia sensitive part of the central nervous system. Here, we quantify the in vivo retinal light response (electroretinogram; ERG) in three vertebrates that exhibit varying degrees of anoxia tolerance: freshwater turtle (Trachemys scripta), epaulette shark (Hemiscyllium ocellatum) and leopard frog (Rana pipiens). A virtually total suppression of ERG in anoxia, probably resulting in functional blindness, has previously been seen in the extremely anoxia-tolerant crucian carp (Carassius carassius). Surprisingly, the equally anoxia-tolerant turtle, which strongly depresses brain and whole-body metabolism during anoxia, exhibited a relatively modest anoxic reduction in ERG: the combined amplitude of turtle ERG waves was reduced by approximately 50% after 2 h. In contrast, the shark b-wave amplitude practically disappeared after 30 min of severe hypoxia, and the frog b-wave was decreased by approximately 75% after 40 min in anoxia. The specific A(1) adenosine receptor antagonist CPT significantly delayed the suppression of turtle ERG, while the hypoxic shark ERG was unaffected by the non-specific adenosine receptor antagonist aminophylline, suggesting adenosinergic involvement in turtle but not in shark.

Fault-Tolerant Control Strategy for Steering Failures in Wheeled Planetary Rovers

Directory of Open Access Journals (Sweden)

Alexandre Carvalho Leite

2012-01-01

Full Text Available Fault-tolerant control design of wheeled planetary rovers is described. This paper covers all steps of the design process, from modeling/simulation to experimentation. A simplified contact model is used with a multibody simulation model and tuned to fit the experimental data. The nominal mode controller is designed to be stable and has its parameters optimized to improve tracking performance and cope with physical boundaries and actuator saturations. This controller was implemented in the real rover and validated experimentally. An impact analysis defines the repertory of faults to be handled. Failures in steering joints are chosen as fault modes; they combined six fault modes and a total of 63 possible configurations of these faults. The fault-tolerant controller is designed as a two-step procedure to provide alternative steering and reuse the nominal controller in a way that resembles a crab-like driving mode. Three fault modes are injected (one, two, and three failed steering joints in the real rover to evaluate the response of the nonreconfigured and reconfigured control systems in face of these faults. The experimental results justify our proposed fault-tolerant controller very satisfactorily. Additional concluding comments and an outlook summarize the lessons learned during the whole design process and foresee the next steps of the research.

Attenuation of Morphine-Induced Tolerance and Dependence by Pretreatment with Cerebrolysin in Male rats.

Science.gov (United States)

Ghavimi, Hamed; Darvishi, Sara; Ghanbarzadeh, Saeed

2018-01-01

Dependence and tolerance to morphine are major problems which limit its chronic clinical application. This study was aimed to investigate the attenuation effect of Cerebrolysin, a mixture of potent growth factors (BDNF, GDNF, NGF, CNTF etc,), on the development of Morphine-induced dependence and tolerance. Male Wistar rats were selected randomly and divided into different groups (n=8) including: a control group, groups received additive doses of morphine (5-25 mg/kg, ip, at an interval of 12 h until tolerance completion), and groups pretreated with Cerebrolysin (40, 80 and 160 mg/kg, ip, before morphine administration). Development of tolerance was assessed by tail-flick test and the attenuation effect of Cerebrolysin on morphine-induced dependence was evaluated after injection of naloxone (4 mg/kg, ip, 12 h after the morning dose of morphine). Seven distinct withdrawal signs including: jumping, rearing, genital grooming, abdominal writhing, wet dog shake and teeth grinding were recorded for 45 min and total withdrawal score (TWS) was calculated. Results showed that administration of Cerebrolysin could prolonged development (10 and 14 days in administration of 80 mg/kg and 160 mg/kg Cerebrolysin) and completion (4, 10 and 14 days in administration of 40, 80 and 160 mg/kg Cerebrolysin, respectively) of tolerance. Results also indicated that administration of Cerebrolysin (40, 80 and 160 mg/kg) could significantly decreased the TWS value (62±2, 77±4 and 85±6%, respectively). In conclusion, it was found that pretreatment with Cerebrolysin could attenuated morphine-induced tolerance and dependence. © Georg Thieme Verlag KG Stuttgart · New York.