WorldWideScience

Sample records for provisional technical secretariat

  1. Caribbean Community (CARICOM) Secretariat, Sustainable Development Secretariat

    Energy Technology Data Exchange (ETDEWEB)

    Fevrier, C.

    1999-11-01

    In spite of low petroleum prices, energy remains a significant issue in the development thrust of the Caribbean. With the exception of Trinidad and Tobago and to a lesser extent Barbados the region relies on imported petroleum for its commercial energy needs. The Secretariat will continue to pursue collaboration with agencies in the hemisphere so that the potential of the renewable energy resource of the Caribbean region can be fully utilized. This commitment is being demonstrated with collaboration with the Caribbean Energy Information System (CEIS), The University of the West Indies Centre for Environment and Development (UWICED) and the Latin American Energy Organization and the Climate Institute in formulating projects and programmes in the Energy Sector. (EHS)

  2. Role of Provisional Fixation of Fracture Fragments By Steinmann-Pin and Technical Tips in Proximal Femoral Nailing for Intertrochanteric Fracture.

    Science.gov (United States)

    Jain, Mohit J; Mavani, Kinjal J; Patel, Dhaval

    2017-06-01

    Proximal Femoral Nailing (PFN) in Intertrochanteric Fractures (IF) is becoming the choice of implant due to better biomechanics and prevention of varus collapse associated with Dynamic Hip Screw (DHS). Technical difficulties and implant related complications are yet to be addressed. To understand the technical difficulties involved in PFN and role of provisional fixation of fracture by Steinmann-pin. In this study, 55 patients presented to a tertiary trauma center in India with trochanteric fractures from April 2010 to March 2012 were included and treated with PFN. All patients were followed-up for two years and final outcome assessment included shortening, neck shaft angle and Harris Hip Score was done. In all except one, neck shaft angle greater than 130° was achieved and also maintained in the final follow up (Mean 131.1°). All fractures were united with mean shortening of 3.6 mm and average Harris Hip Score of 91 after two years. There were five complications which included one shortening, two varus collapses, one backed out screws and one reverse Z effect. Though PFN is technically challenging, with proper technique, gives excellent results with negligible varus collapse even in unstable fractures. Three most important technical aspects are achieving good non-varus reduction, inserting nail correctly and accurate placement of lag screws. The technique of provisional fixation of fracture fragments by Steinmann-pin significantly helps in achieving these and reduces the risk of implant failure.

  3. How International was the Secretariat of the League of Nations?

    DEFF Research Database (Denmark)

    Dykmann, Klaas

    2015-01-01

    In recent years, scholars have contested conventional narratives such as that the League of Nations was a complete ‘failure’ or that the United Nations was a novelty in comparison with the League. Scholars now offer more nuanced and archive-based analyses. However, while traditional research has...... emphasised the establishment of the first formally independent international civil service and the corresponding secretariat as one of the League's few big achievements, the subject has not substantially benefitted from these new historical studies. This article helps to shed some light on the secretariat......'s nature and how international the staff really was. After examining the prevailing image of the international civil service at the League, the data will be supplemented by an analysis of the archive material with regard to recruitment and selected personnel files. This article argues that the secretariat...

  4. Individuality and Leadership Reflected in Randall Wallace's Secretariat

    OpenAIRE

    Primadany, Risma Sinta

    2017-01-01

    Secretariat is a movie which tells about the life of Penny Chenery in leading her Meadow Stable. Secretariat is the name of a horse owned by Chenery's family who can bring the business into success by winning many race competitions. The main character, Penny Chenery, is the person who continues leading her parent's business. The aims of this thesis are to describe the intrinsic aspects which are narrative elements (characters, setting, conflict) and cinematic elements (camera distance, angle,...

  5. Executive Secretariat: profession trends in a world increasingly dynamic

    Directory of Open Access Journals (Sweden)

    Maria do Carmo Assis Todorov

    2016-07-01

    Full Text Available Faced with the changes in recent decades, the article aims to verify that the Secretariat professional is needed in organizational structures. To achieve the objective prepared a literature review on the history of the profession, technological innovation and current and future skills. The data collected from the research, applied by the Union of Secretaries and Secretaries of State of São Paulo-SINSESP underwent a qualitative assessment on the skills of the professional. The participants were 201 professional secretariat of the capital and several cities in the state. Through literature review found that the Secretary is required in organizations and through data collected from the survey, it was found that the competences of the Secretariat professional accompanied the profile of the professional future.

  6. Professional Employability: Executive Secretariat in Focus on Northern Amazon

    Directory of Open Access Journals (Sweden)

    Antônia Aline Rodrigues

    2016-12-01

    Full Text Available This article aims to determine the difficulties encountered by the Executive Secretary of professionals concerning their integration in the labor market in the city of Boa Vista, Roraima, in the northern Amazon. Therefore, it was a qualitative study, with in-depth interviews with professionals from the Executive Secretary and Human Resources managers. After data analysis, it was found that the insertion difficulties in the labor market for these professionals are: shortage of jobs in the private sector in Roraima; low pay to the profession; lack of recognition and lack the powers of managers, which indicate the versatility and employability security for Executive Secretariat professionals. Seeing a gap is seen in two views as to the professionals of the Executive Secretariat, only the versatility is not employment guarantee.

  7. Executive Secretariat: profession trends in a world increasingly dynamic

    OpenAIRE

    Maria do Carmo Assis Todorov; Cibele Barsalini Martins; Luiz Antonio Genghini; Sergio Bomfim Martins; Claudia Terezinha Kniess

    2016-01-01

    Faced with the changes in recent decades, the article aims to verify that the Secretariat professional is needed in organizational structures. To achieve the objective prepared a literature review on the history of the profession, technological innovation and current and future skills. The data collected from the research, applied by the Union of Secretaries and Secretaries of State of São Paulo-SINSESP underwent a qualitative assessment on the skills of the professional. The participants wer...

  8. Sequential provisional implant prosthodontics therapy.

    Science.gov (United States)

    Zinner, Ira D; Markovits, Stanley; Jansen, Curtis E; Reid, Patrick E; Schnader, Yale E; Shapiro, Herbert J

    2012-01-01

    The fabrication and long-term use of first- and second-stage provisional implant prostheses is critical to create a favorable prognosis for function and esthetics of a fixed-implant supported prosthesis. The fixed metal and acrylic resin cemented first-stage prosthesis, as reviewed in Part I, is needed for prevention of adjacent and opposing tooth movement, pressure on the implant site as well as protection to avoid micromovement of the freshly placed implant body. The second-stage prosthesis, reviewed in Part II, should be used following implant uncovering and abutment installation. The patient wears this provisional prosthesis until maturation of the bone and healing of soft tissues. The second-stage provisional prosthesis is also a fail-safe mechanism for possible early implant failures and also can be used with late failures and/or for the necessity to repair the definitive prosthesis. In addition, the screw-retained provisional prosthesis is used if and when an implant requires removal or other implants are to be placed as in a sequential approach. The creation and use of both first- and second-stage provisional prostheses involve a restorative dentist, dental technician, surgeon, and patient to work as a team. If the dentist alone cannot do diagnosis and treatment planning, surgery, and laboratory techniques, he or she needs help by employing the expertise of a surgeon and a laboratory technician. This team approach is essential for optimum results.

  9. The Commission and the Council Secretariat in the 2000 IGC

    DEFF Research Database (Denmark)

    Beach, Derek

    2006-01-01

    This chapter investigates ‘what went wrong’ for the two institutions in the 2000 IGC, and how these institutions, nevertheless, were able to gain some influence on the margins. A theoretical framework is first put forward that details how supranational influence is contingent upon both the context...... and actual strategies employed by supranational actors in an IGC. Following this, the chapter will first review the preferences of the two supranational actors in the 2000 IGC, showing that they do not always reflect Member State government preferences. Thereafter, the chapter looks...... at the bargaining resources that the Commission and the Secretariat had in the 2000 IGC which could potentially be translated into influence through the negotiation process. Next, the analysis will investigate the context of the IGCs, showing the contextual factors which limited the range of opportunities available...

  10. CHANGES OF PARADIGM IN THE SECRETARIAT PROFESSIONALS MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Walkíria Gomes de Almeida

    2010-09-01

    Full Text Available In this unstable market, with continuous changes, it is necessary that professionals increase their skills and prepare themselves for an overwhelming competitiveness, seeking for developmental alternatives. Secretariat professionals evolved and developed over a long trajectory of struggles and achievements, including globalization and technological revolution. Their professional profile has changed over the years and nowadays we observe that they act as co-managers, entrepreneurs, and consultants who work in an operational basis focused on results. The profession has won many victories: profession’s regulation law, code of ethics, establishment of the Secretaries’ National Association, Secretaries’ Labor Union in all Brazilian states, and so forth. However, even after all this evolution, there are companies and managers who do not believe in professional changing paradigms. They believe that secretaries’ work is the same as in past decades. This is the reason why this research sought to investigate which are the desirable skills to the secretariat’s professionals in order to allow them to contribute to the company's results-based management.

  11. The activities of the Narcotics Laboratory Section of the Division of Narcotic Drugs in supporting national laboratories. United Nations Secretariat.

    Science.gov (United States)

    1984-01-01

    Since the establishment of the Narcotics Laboratory Section of the Division of Narcotic Drugs of the United Nations Secretariat in 1954, in accordance with resolution 834 (IX) of the United Nations General Assembly, the activities of the Narcotics Laboratory Section have developed according to the recommendations of the Commission on Narcotic Drugs. The Narcotics Laboratory Section carried out research on opium, cannabis, khat and codeine. The current programme of the Laboratory Section includes the following activities: Providing training in drug identification techniques to scientists, primarily from developing countries, and developing training standards; Strengthening national narcotics laboratories in developing countries, including the procurement of basic laboratory equipment; Developing standard testing methods applicable in developing countries; Providing reference samples for analytical and research purposes; Providing scientific and technical information on drugs of abuse; Collaborating with national narcotics laboratories.

  12. VSRR Provisional Drug Overdose Death Counts

    Data.gov (United States)

    U.S. Department of Health & Human Services — This data contains provisional counts for drug overdose deaths based on a current flow of mortality data in the National Vital Statistics System. National...

  13. EXECUTIVE SECRETARIAT STUDENTS´ PROFILE (FRESHMEN AND SENIORS: A COMPARATIVE STYDY IN PUBLIC EDUCATION INSTITUTIONS

    Directory of Open Access Journals (Sweden)

    Vania Souza Bilert

    2012-05-01

    Full Text Available The objective of this paper is to identify the profile of beginner and graduate students who apply for Executive Secretariat graduation course. This research was carried out with students from 11 Brazilian public undergraduate schools, both federal and state ones. This is considered a descriptive and exploratory study, which analyzed 507 students, 311 beginners and 196 graduate ones. The main results show that students perform in different segment companies, but especially in service companies, 87% are female and the predominant age group is between 17 and 24 years old. In a positive way, this research stands out the factor that these students perform professionally since the beginning of the graduation, exerting the functions which are up to the Executive Secretariat professional. This reveals that the students are able to link what they have learned inside the classroom with the professional practice, which also highlights the acceptance of professionals of Executive Secretariat by the entrepreneurship.

  14. 50 CFR 23.84 - What are the roles of the Secretariat and the committees?

    Science.gov (United States)

    2010-10-01

    ..., EXPORTATION, AND IMPORTATION OF WILDLIFE AND PLANTS (CONTINUED) CONVENTION ON INTERNATIONAL TRADE IN... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false What are the roles of the Secretariat and the committees? 23.84 Section 23.84 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE...

  15. The Evolvement of International Secretariats, Executive Heads and Leadership in Inter-Organizational Relations

    NARCIS (Netherlands)

    Reinalda, B.; Kille, K.J.

    2016-01-01

    This chapter discusses inter-organizational relations (IORs) from the perspective of the international Secretariat of an International Governmental Organization (IGO) and the organization’s Executive Head. IORs are a long-standing phenomenon that resulted from the evolution of IGOs, the increase in

  16. Decline and Fall:Why The South African Civilian Defence Secretariat ...

    African Journals Online (AJOL)

    Those attempts at solution all ignored the fundamental constitutional principles behind the establishment of the Secretariat as well as the principles of organizational theory, ambiguity about authority, mministerial failures, the personalities involved and ill-considered appointments and also the failure to exploit the benefits of ...

  17. Annual report of the Certification Secretariat of Wind Turbines for 2009; AArsrapport for Energistyrelsens Godkendelsessekretariat for Vindmoeller 2009

    Energy Technology Data Exchange (ETDEWEB)

    Lemming, J.

    2010-09-15

    This report was prepared as documentation for the activities in the Certification Secretariat of Wind Turbines in 2009. The secretariat has performed duties under a contract with the DEA (Danish Energy Agency), where the contents of the tasks are focused on administration of the Danish Certification Scheme for Wind Turbines. The report describes the current state of deployment of wind tur-bines in Denmark and the latest developments in wind turbine industry. Furthermore, the development of test areas is described. The tasks of the Secretariat has included daily administration, including ensuring the secretariat for the Advisory Committee, implementing the system of maintenance and service, development of new licensing rules for small wind turbines, and the approval and reviews of small wind turbines. In addition, the Secretariat and related experts from Risoe participated in Danish and international standards committees. (Author)

  18. Annual report of the Certification Secretariat of Wind Turbines for 2010; AArsrapport: Energistyrelsens Godkendelsessekretariat for Vindmoeller 2010

    Energy Technology Data Exchange (ETDEWEB)

    Lemming, J.K.; Friis, P.

    2011-12-15

    This report was prepared as documentation for the activities in the Certification Secretariat of Wind Turbines in 2010. The secretariat has performed duties under a contract with the DEA, where the contents of the tasks are focused on administration of the Danish Certification Scheme for Wind Turbines. The report describes the current state of deployment of wind turbines in Denmark and the latest developments in wind turbine industry. Furthermore, the development of test areas is described. The tasks of the Secretariat has included daily administration, including ensuring the secretariat for the Advisory Committee, implementing the system of maintenance and service, development of new licensing rules for small wind turbines, and the approval and reviews of small wind turbines. In addition, the Secretariat and related experts from Risoe DTU participated in Danish and international standards committees. (Author)

  19. The fixed/detachable implant provisional prosthesis.

    Science.gov (United States)

    Cibirka, R M; Linebaugh, M L

    1997-06-01

    Interim modification and management of a complete denture following surgical uncovering of dental implants can be time-intensive and may fail to provide adequate patient benefit until the definitive prosthesis can be completed. Inadequate interim management can result in functional and tissue difficulties. Modification of the conventional complete denture to a fixed/detachable provisional prosthesis in a one-stage procedure provides the patient an opportunity to experience a fixed prosthesis. The incorporation of fixed, provisional cylinders to the existing denture base using autopolymerizing acrylic resin with a closed-mouth technique is described. The peripheral regions are reduced and the distal extension shortened to resemble a fixed/detachable prosthesis. This conversion technique can provide patient satisfaction and comfort until delivery of the definitive prosthesis. Esthetic concerns, home care problems, or patient difficulties with the provisional prosthesis can be rectified in the final prosthesis.

  20. 14 CFR 121.207 - Provisionally certificated airplanes: Operating limitations.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Provisionally certificated airplanes... AND OPERATIONS OPERATING REQUIREMENTS: DOMESTIC, FLAG, AND SUPPLEMENTAL OPERATIONS Airplane Performance Operating Limitations § 121.207 Provisionally certificated airplanes: Operating limitations. In...

  1. VSRR - Provisional monthly number of live births by state

    Data.gov (United States)

    U.S. Department of Health & Human Services — https://www.cdc.gov/nchs/products/vsrr/provisional-tables.htm Monthly provisional counts of births are provided by state of residence (50 states, District of...

  2. VSRR - Provisional monthly number of deaths by state

    Data.gov (United States)

    U.S. Department of Health & Human Services — https://www.cdc.gov/nchs/products/vsrr/provisional-tables.htm Monthly provisional counts of deaths and infant deaths are provided by state of residence (50 states,...

  3. Bacterial adhesion of porphyromonas gingivalis on provisional fixed prosthetic materials

    Directory of Open Access Journals (Sweden)

    Mustafa Zortuk

    2010-01-01

    Conclusion : The quantity of bacterial adhesion and surface roughness differed among the assessed provisional fixed prosthodontic materials. The light-polymerized provisional material Revotek LC had rougher surface and more bacterial adhesion compared with the others.

  4. Factors Affecting The Career Development Of Employees In Secretariat Office Of City Samarinda

    Directory of Open Access Journals (Sweden)

    Santi Rande

    2015-03-01

    Full Text Available ABSTRACT Although the primary responsibility for career planning lies in the individual but organizational career planning should be completely in line with individual career planning if an organization wants to retain the best employees. Assumptions and the perspective delivers the researchers to examine the influence of aspects of individual and organizational aspects of the career development of employees within the organization of government. The population in this study were employees of the Regional Secretariat of Samarinda by sampling using Proportional Sampling. This research uses a quantitative approach to the explanation that the format is done through surveys. The results showed that the main factors affecting the career development of staff at the Regional Secretariat Samarinda is a factor of career counseling performance appraisal and career mapping which affects the employees career development is partially respectively or simultaneously together .

  5. Generalized provisional seed zones for native plants

    Science.gov (United States)

    Andrew D. Bower; J. Bradley St.Clair; Vicky. Erickson

    2014-01-01

    Deploying well-adapted and ecologically appropriate plant materials is a core component of successful restoration projects. We have developed generalized provisional seed zones that can be applied to any plant species in the United States to help guide seed movement. These seed zones are based on the intersection of high-resolution climatic data for winter minimum...

  6. INTERACTIVE NAME PLACEMENT FOR PROVISIONAL MAPS.

    Science.gov (United States)

    Goldberg, Jeffrey L.; Miller, Thomas C.

    1983-01-01

    Computer generation and placement of map type has been refined into a production mode at Mid-Continent Mapping Center (MCMC) for USGS 1:24,000- and 1:25,000-scale Provisional maps. The map collar program is written in FORTRAN using batch processing that allows the program to work in the background.

  7. VSRR - Quarterly provisional estimates for infant mortality

    Data.gov (United States)

    U.S. Department of Health & Human Services — Provisional estimates of infant mortality (deaths of infants under 1 year per 1,000 live births), neonatal mortality (deaths of infants aged 0-27 days per 1,000 live...

  8. The Organization Culture In The Public Service At The Regional Secretariat Of Samarinda City

    Directory of Open Access Journals (Sweden)

    Anwar

    2015-02-01

    Full Text Available Abstract The purpose of this research to analyzing the process of the management of internal integration in an effort to improve public services in the secretariat of the city .In the research results seen that there are culture of bubuhan familial in the management of internal integration in the secretariat of the city of samarinda through a the creation of a language together and conceptual categories in b the distribution of power and status c establishment norms closeness of a working relationship peers and d the application of the award and punishment. In addition to want to answer a desire as well as the need for public service excellence service unit to improve integrated permit handling UPT integrated permit handling services agency one gate BPPTSP capital city of samarinda . In the management of internal integration process in cultural organization that takes the conceptculture of bubuhan must be planned carefully and without prejudice to the rules of law applicable because if not handled wisely can be counter-productive with the vision and mission of Samarinda Government because it can cause a client patron relations which can actually inhibit the organization in achieving its vision and mission.

  9. A provisional fixed partial denture for an implant prosthesis.

    Science.gov (United States)

    Hansen, Paul A; Kim, Eunghwan

    2010-01-01

    This article presents a technique for fabricating an esthetic provisional restoration on multiple implants. Fabricating a provisional restoration allows the dentist to make a replica of the desired restoration. The incisal edge can be placed for esthetics and function in the new provisional restoration, allowing patients to evaluate comfort and test their ability to speak with the contour of the provisional restoration. Patients can evaluate both the ease of cleaning the restoration and how tissue esthetics can be duplicated to their satisfaction. By adding acrylic resin to or removing it from the provisional, the dentist can easily change the restoration until the patient is satisfied with the esthetic and functional result. This technique will allow the dentist to fabricate the provisional prosthesis quickly, while the patient is in the chair.

  10. Fixed and removable provisional options for patients undergoing implant treatment.

    Science.gov (United States)

    Cho, Sang-Choon; Shetty, Saphal; Froum, Stuart; Elian, Nicolas; Tarnow, Dennis

    2007-11-01

    The provisional phase of treatment can be the most challenging aspect of implant dentistry. The techniques available today include removable, tooth-supported, and implant-retained provisional restorations. The selection of the type of provisional prosthesis should be based on esthetic demands, functional requirements, duration, and ease of fabrication. This article includes a review of 118 articles from peer-reviewed journals published in English from January 1986 to February 2007. This review was performed using MEDLINE. The indications, advantages, and disadvantages of the various provisional restorations are discussed.

  11. 2012 Provisional classification criteria for polymyalgia rheumatica

    DEFF Research Database (Denmark)

    Dasgupta, Bhaskar; Cimmino, Marco A; Kremers, Hilal Maradit

    2012-01-01

    % and specificity to 81%. According to these provisional classification criteria, patients ≥50 years old presenting with bilateral shoulder pain, not better explained by an alternative pathology, can be classified as having PMR in the presence of morning stiffness >45 minutes, elevated C-reactive protein and......The objective of this study was to develop European League Against Rheumatism/American College of Rheumatology classification criteria for polymyalgia rheumatica (PMR). Candidate criteria were evaluated in a 6-month prospective cohort study of 125 patients with new-onset PMR and 169 non......-PMR comparison subjects with conditions mimicking PMR. A scoring algorithm was developed based on morning stiffness >45 minutes (2 points), hip pain/limited range of motion (1 point), absence of rheumatoid factor and/or anti-citrullinated protein antibody (2 points), and absence of peripheral joint pain (1 point...

  12. VSRR - Quarterly provisional estimates for selected birth indicators

    Data.gov (United States)

    U.S. Department of Health & Human Services — Provisional estimates of selected reproductive indicators. Estimates are presented for: general fertility rates, age-specific birth rates, total and low risk...

  13. VSRR - Quarterly provisional estimates for selected indicators of mortality

    Data.gov (United States)

    U.S. Department of Health & Human Services — Provisional estimates of death rates. Estimates are presented for each of the 15 leading causes of death plus estimates for deaths attributed to drug overdose, falls...

  14. CURRÍCULOS DE SECRETARIADO EXECUTIVO: ALGUMAS REFLEXÕES CURRICULUM OF EXECUTIVE SECRETARIAT: SOME REFLECTIONS

    Directory of Open Access Journals (Sweden)

    Aneridis Aparecida Monteiro

    2011-05-01

    Full Text Available

    Ao longo dos últimos anos o curso de graduação em bacharelado em Secretariado Executivo é alvo de concepções errôneas, bem como de comparações equivocadas a outros cursos de áreas afins e/ou nomenclaturas semelhantes. Emerge nesse sentido a necessidade de estudos que tragam de forma esclarecedora, a discussão de como é elaborada a estrutura curricular desse curso de graduação. Dessa forma, este artigo tem como objetivo principal comparar a estrutura curricular de três instituições de ensino superior do Brasil, tendo como objeto de estudo duas universidades públicas e uma privada em três regimes distintos, federal, estadual e privado. Para tanto, parte-se de um levantamento bibliográfico com autores que têm discutido as concepções de currículo, de um modo geral, servindo como base no estudo, bem como à abordagem da Diretriz Curricular Nacional (DCN do curso no intuito de verificar os aspectos igualitários e diferenciais em relação a estas três instituições de ensino superior, onde serão valorizadas esferas de ordem social, institucional e regimentar. As conclusões apontam para a abrangência e relevância do curso de Secretariado Executivo, bem como que as IES analisadas estão adequadas às exigências do Ministério da Educação no tocante à formação acadêmica desses profissionais.

    Along the last years, it is noticed that the degree course in baccalaureate in Executive Secretariat is white of erroneous conceptions, as well as of mistaken comparisons the other courses of similar areas and/or similar nomenclatures. It emerges in that sense the need of studies that you/they swallow in an explanatory way, the discussion of as the curriculum structure of that degree course is elaborated. In that way, this article has as main objective to compare the curriculum structure of three institutions of higher education of Brazil, tends as object of study two public universities

  15. Conflict-of-interest disclosure at medical journals in Japan: a nationwide survey of the practices of journal secretariats.

    Science.gov (United States)

    Kojima, Takako; Green, Joseph; Barron, J Patrick

    2015-08-26

    Medical journals in Japan generally have appropriate policies regarding disclosure of conflicts of interest (COI). However, COI management depends on the staff members of each journal's editorial secretariat. This study's objectives were to find out (A) whether COI disclosure and the journal's role in it are clearly understood by the journal's secretariat staff, (B) how much experience the editorial secretariat has in actually handling issues related to disclosure and (C) what kind of help or support they need. In January 2014, questionnaires were sent to the editorial secretariats of journal-publishing societies belonging to the Japanese Association of Medical Sciences (JAMS). The response rate was 100%, and the respondents represented 121 journals published by the 118 JAMS member societies (at the time of the survey). Information was collected on the history of COI policies and on how those policies were implemented. At the end of the questionnaire, there was an open-ended call for comments. Compulsory COI disclosure began between 2010 and 2013 for 60.3% of the journals (73/121). Handling of COI issues was not uniform: 17.4% (21/121) of respondents do not pursue cases of dubious disclosure, and 47.9% (58/121) do not require COI disclosures from editorial board members. Very few of the editorial secretariats had clearly-stated consequences for violations of COI-disclosure policy (33/121, 27.3%), and only 28.9% offered COI education (35/121). Respondents' comments indicated that uniform, easily-searchable guidance regarding COI policies and implementation would be welcome. Although commitment is widespread, policy implementation is inconsistent and COI experience is lacking. Clear, easy-to-use guidelines are desired by many societies. The JAMS is to be commended for supporting this country-wide investigation; other countries and regions are encouraged to perform similar investigations to respond to needs regarding COI management. Published by the BMJ Publishing

  16. Technology and the use of acrylics for provisional dentine protection.

    Science.gov (United States)

    Kapusevska, Biljana; Dereban, Nikola; Popovska, Mirjana; Nikolovska, Julijana; Radojkova Nikolovska, Vеrа; Zabokova Bilbilova, Efka; Mijoska, Aneta

    2013-01-01

    Acrylics are compounds polymerized from monomers of acrylic, metacrylic acid or acrylonitrates. The purpose of this paper is to present the technology and use of acrylics for provisional dentine protection in the practice of dental prosthodontics. For this reason, we followed 120 clinical cases from the everyday clinical practice, divided into 4 groups of 30 patients who needed prosthetic reconstruction. The first group included cases in which we applied celluloid crowns for dentine protection, for the second group we used acrylic teeth from a set of teeth for complete dentures; in the third and fourth groups the fabrication was done with the system of an impression matrix and the acrylic resin block technique respectively. In all the examined patients, the gingival index by Silness and Loe and the vitality of the dental pulp were verified clinically, after preparation and 8 days from the placement of the provisional crown. The value for dental sensitivity measured after preparation was 2.59, and 8 days after the placement of the provisional crown it bwas 3.1. From these results we can conclude that after the 8th day from the placement of the provisional crown, there was an adaptation period, characterized by a decrease in the painful sensations. The value of the Silness and Loe gingival index measured after the preparation was 1.34, and 8 days from the placement of the provisional crown was 0.94. The results inclined us to the fact that the provisional acrylic crowns facilitated the reparation of the periodontal tissue.

  17. La ejecución provisional de las sentencias

    OpenAIRE

    Silva Álvarez,Óscar

    2008-01-01

    Dentro de la corriente reformista del proceso civil en Chile, un lugar importante debería estar ocupado por la figura de la ejecución provisional de las sentencias judiciales, como una manifestación del derecho a la tutela judicial efectiva y un instrumento para el acortamiento de los tiempos en el proceso. El presente artículo contiene un examen teórico a la figura de la ejecución provisional, y establece las reglas técnicas de su configuración legal. También analiza los aislados casos de ta...

  18. Occlusal wear of provisional implant-supported restorations

    NARCIS (Netherlands)

    Santing, Hendrik J.; Kleverlaan, Cornelis J.; Werner, Arie; Feilzer, Albert J.; Raghoebar, Gerry M.; Meijer, Henny J. A.

    BACKGROUND: Implant-supported provisional restorations should be resistant to occlusal wear. PURPOSE: The purpose of this laboratory study was to evaluate three-body wear of three indirect laboratory composite resins, five chair side bis-acryl resin-based materials, and two chair side

  19. Evaluation of Vertical Marginal Adaptation of Provisional Crowns by ...

    African Journals Online (AJOL)

    2018-01-30

    Jan 30, 2018 ... Department of Prosthetic Dental Sciences, College of Dentistry,. King Saud University, Riyadh, Kingdom of Saudi Arabia. E‑mail: malrifaiy@hotmail.com. How to cite this article: Al Rifaiy MQ. Evaluation of vertical marginal adaptation of provisional crowns by digital microscope. Niger J Clin Pract. 2017 ...

  20. Effect of provisional cements on shear bond strength of porcelain laminate veneers.

    Science.gov (United States)

    Altintas, Subutay Han; Tak, Onjen; Secilmis, Asli; Usumez, Aslihan

    2011-08-01

    The purpose of this study was to evaluate the effect of three provisional cements and two cleaning techniques on the final bond strength of porcelain laminate veneers. The occlusal third of the crowns of forty molar teeth were sectioned and embedded in autopolymerizing acrylic resin. Dentin surfaces were polished and specimens were randomly divided into four groups (n=10). Provisional restorations were fabricated and two provisional restorations were cemented onto each tooth. Restorations were fixed with one of three different provisional cements: eugenol-free provisional cement (Cavex), calcium hydroxide (Dycal), and light-cured provisional cement (Tempond Clear). Provisional restorations were removed with either a dental explorer and air-water spray, or a cleaning bur (Opticlean). In the control group, provisional restorations were not used on the surfaces of specimens. IPS Empress 2 ceramic discs were luted with a dual-cured resin cement (Panavia F). Shear bond strength was measured using a universal testing machine. Data were statistically analyzed by ANOVA, Tukey's HSD and Dunnett tests. Surfaces were examined by scanning electronic microscopy. Significant differences were found between the control group and both the light-cured provisional cement groups and the eugenol-free provisional cement-cleaning bur group (Pprovisional cement showed the lowest bond strength values. Selection of the provisional cement is an important factor in the ultimate bond strength of the final restoration. Calcium hydroxide provisional cement and cleaning with a dental explorer are advisable.

  1. Bacterial leakage of provisional restorative materials used in endodontics.

    Science.gov (United States)

    Hartwell, Gary R; Loucks, Carina A; Reavley, Brenton A

    2010-04-01

    To test the bacterial sealing ability of commonly used provisional endodontic restorative materials. This study investigated Cavit (3M ESPE), Ketac (3M ESPE), DuoTemp (Coltane/Whaledent), and a combination technique using Ketac and Cavit. One hundred molars were randomly selected and then mounted in an apparatus that isolated the crown portion of the tooth. Provisional restorative materials were placed in an open access following manufacturer guidelines. Streptococcus mutans was applied to the samples, and results were tabulated over the course of 4 weeks. Cavit and DuoTemp performed the best, and Ketac performed the worst. After 14 days, however, all materials leaked in over half of the samples. No material can be recommended as superior in providing a reliable seal after 14 days.

  2. Provisional Crown Dislodgement during Scuba Diving: A Case of Barotrauma

    OpenAIRE

    Meenal Nitin Gulve; Nitin Dilip Gulve

    2013-01-01

    Changes in ambient pressure, for example, during flying, diving, or hyperbaric oxygen therapy, can lead to barotrauma. Although it may seem that this issue was neglected in dental education and research in recent decades, familiarity with and understanding of these facts may be of importance for dental practitioners. We report the case of a patient who experienced barotrauma involving dislodgement of a provisional crown during scuba diving. Patients who are exposed to pressure changes as a pa...

  3. Immediately Loaded Intraorally Welded Complete-Arch Maxillary Provisional Prosthesis.

    Science.gov (United States)

    Albiero, Alberto Maria; Benato, Renato; Fincato, Andrea

    2015-01-01

    Guided implant surgery is not completely accurate when using computer-designed stereolithographic surgical guides. Complications are frequently reported when combining computer-guided flapless surgery with an immediately loaded prefabricated prosthesis. Achieving passive fit of a prefabricated prosthesis on the inserted implants the same day of the surgery can be difficult. The aim of this report is to show a new treatment approach to immediately loaded implants inserted with computer-guided surgery using an intraoral welded full-arch provisional prosthesis.

  4. In vitro color stability of provisional restorative materials

    Directory of Open Access Journals (Sweden)

    Hamid Jalali

    2012-01-01

    Aims: The purpose of this study was to investigate the effect of tea on provisional restorative materials. Setting and Design: This study was designed to measure the degree of color change of three acrylic resin provisional materials, before and after immersion in artificial saliva and artificial saliva-tea solution for 2 and 4 weeks. Materials and Methods : Three types of acrylic provisional materials (duralay, tempron, acropars TRP, were studied. Twenty disks (20±0.1 mm by 2±0.05 mm were fabricated from each material. Specimens were polished with acrylic bur using pumice and diamond polishing paste. Base line color was measured using a spectrophotometer. Ten disks were stored in artificial saliva and 10 were stored in a solution of artificial saliva and tea at room temperature. Color measurements were made after 2 and 4 weeks of immersion. Statistical analysis used: Differences in color changes were compared by two way ANOVA, across the six groups, followed by a Turkey-Kramer′s multiple comparison test. Results: For specimens immersed in artificial saliva, the color change of methyl methacrylate materials; duralay (ΔE=4.94 and tempron (ΔE=6.54, was significantly more than butyl methacrylate material; acropars (ΔE=4.10. After immersion in an artificial saliva- tea solution, tempron exhibited less color change (ΔE=8.50 compared to duralay (ΔE=10.93 and acropars (ΔE=15.64. Conclusion: Color stability of methyl methacrylate is higher than butyl methacrylates so if provisional materials are used for extended periods of time; tempron is preferred.

  5. Provisional implants for immediate restoration of partially edentulous jaws: a clinical study.

    Science.gov (United States)

    Krennmair, Gerald; Krainhöfner, Martin; Weinländer, Michael; Piehslinger, Eva

    2008-01-01

    The aim of this study was to evaluate the use of provisional implants, which can provide patients with provisional fixed partial dentures during the healing time of augmentation procedures and/or during the osseointegration period of definitive implants until delivery of the definitive prosthesis. Thirty-one patients were consecutively included in the study. Eighteen patients (group A, primary simultaneous group) were initially treated simultaneously with provisional and definitive implants and provided with 18 interim fixed partial dentures. Thirteen patients (group B) received provisional implants in a staggered procedure. In the first stage of group B patients (augmentation phase), provisional implants were placed to bridge the augmentation phase and for anchoring 13 interim fixed partial dentures. In the second stage (secondary simultaneous group), patients of group B received provisional implants to bridge the osseointegration phase for simultaneously placed definitive implants by further use of 13 interim fixed partial dentures. All patients were followed from provisional implant and definitive implant placement to delivery of the definitive prosthesis. Loss of provisional implants and interim fixed partial dentures was noted, and stability of provisional implants was evaluated using the Periotest device. The procedures of immediate rehabilitation with fixed partial dentures using provisional implants were subjectively rated by patients with regard to satisfaction, treatment period, and acceptance. In 31 patients, 44 provisional fixed partial dentures were supported by 98 provisional implants. No provisional implant loss in group A or group B-second stage was observed. Only 3 (3%) provisional implants were lost in group B-first stage during the augmentation phase. Incidence (90.8% versus 9.2%) and stability (Periotest values: 8.6 +/- 3.9 versus 4.8 +/- 2.7) of provisional implants differed significantly between maxilla and mandible (P fixed partial dentures

  6. Effect of Provisional Cements on Shear Bond Strength of Porcelain Laminate Veneers

    Science.gov (United States)

    Altintas, Subutay Han; Tak, Onjen; Secilmis, Asli; Usumez, Aslihan

    2011-01-01

    Objectives: The purpose of this study was to evaluate the effect of three provisional cements and two cleaning techniques on the final bond strength of porcelain laminate veneers. Methods: The occlusal third of the crowns of forty molar teeth were sectioned and embedded in autopolymerizing acrylic resin. Dentin surfaces were polished and specimens were randomly divided into four groups (n=10). Provisional restorations were fabricated and two provisional restorations were cemented onto each tooth. Restorations were fixed with one of three different provisional cements: eugenol-free provisional cement (Cavex), calcium hydroxide (Dycal), and light-cured provisional cement (Tempond Clear). Provisional restorations were removed with either a dental explorer and air-water spray, or a cleaning bur (Opticlean). In the control group, provisional restorations were not used on the surfaces of specimens. IPS Empress 2 ceramic discs were luted with a dual-cured resin cement (Panavia F). Shear bond strength was measured using a universal testing machine. Data were statistically analyzed by ANOVA, Tukey’s HSD and Dunnett tests. Surfaces were examined by scanning electronic microscopy. Results: Significant differences were found between the control group and both the light-cured provisional cement groups and the eugenol-free provisional cement-cleaning bur group (P<.05). Groups that had received light-cured provisional cement showed the lowest bond strength values. Conclusions: Selection of the provisional cement is an important factor in the ultimate bond strength of the final restoration. Calcium hydroxide provisional cement and cleaning with a dental explorer are advisable. PMID:21912495

  7. Effect of Provisional Cements on Shear Bond Strength of Porcelain Laminate Veneers

    OpenAIRE

    Altintas, Subutay Han; Tak, Onjen; Secilmis, Asli; Usumez, Aslihan

    2011-01-01

    Objectives: The purpose of this study was to evaluate the effect of three provisional cements and two cleaning techniques on the final bond strength of porcelain laminate veneers. Methods: The occlusal third of the crowns of forty molar teeth were sectioned and embedded in autopolymerizing acrylic resin. Dentin surfaces were polished and specimens were randomly divided into four groups (n=10). Provisional restorations were fabricated and two provisional restorations were cemented onto each to...

  8. Provisional drivers' perceptions of the impact of displaying P plates.

    Science.gov (United States)

    Bates, Lyndel; Scott-Parker, Bridie; Darvell, Millie; Watson, Barry

    2017-11-17

    P plates (or decals) identify a driver's license status to other road users. They are a compulsory part of the graduated driver licensing system in Queensland, Australia, for drivers on a P1 (provisional 1) or P2 (provisional 2) license. This study explored the perceptions of young drivers regarding the display of P plates (decals) in Queensland, Australia. In this study, 226 young drivers with a provisional (intermediate/restricted) license completed a 30-min online survey between October 2013 and June 2014. t Tests were used to compare the opinions of people who displayed their plates nearly always with those who displayed them less frequently. Participants approved of the requirement to display P plates with 69% of those on a P1 license and 79% on a P2 license supporting the condition to display P1 (red) plates. Participants on a P1 license (62%) and a P2 license (68%) also approved the requirement to display P2 (green) plates. However, young drivers also perceived that the display of P plates (measured from 1 = never to 5 = nearly all the time) enabled newly licensed drivers to be targeted by police and other drivers (those who do not always display P plates: M = 3.72, SD = 0.94; those who nearly always display P plates: M = 3.43, SD = 1.09). The study findings suggest that participants who nearly always display their P plates are more likely to report that having to display their plates resulted in them driving more carefully.

  9. Workplace exposure to nanoparticles and the application of provisional nanoreference values in times of uncertain risks

    NARCIS (Netherlands)

    van Broekhuizen, P; van Broekhuizen, F.; Cornelissen, R.; Reijnders, L.

    2012-01-01

    Nano reference values (NRVs) for occupational use of nanomaterials were tested as provisional substitute for Occupational Exposure Limits (OELs). NRVs can be used as provisional limit values until Health-Based OELs or derived no-effect levels (DNEL) become available. NRVs were defined for 8 h

  10. Provisional Admission Practices: Blending Access and Support to Facilitate Student Success

    Science.gov (United States)

    Nichols, Andrew Howard; Clinedinst, Melissa

    2013-01-01

    This report examines provisional admission as an initiative that can expand four-year college access and success for students from economically disadvantaged backgrounds. Provisional admission policies and programs enable students to enroll at an institution under specific conditions. Students are often required to meet certain academic…

  11. 76 FR 61042 - Modification of Regulations Regarding the Practice of Accepting Bonds During the Provisional...

    Science.gov (United States)

    2011-10-03

    ... Practice of Accepting Bonds During the Provisional Measures Period in Antidumping and Countervailing Duty... importers directly responsible for the payment of AD and CVD duties. DATES: This Final Rule is effective... practice of accepting bonds during the provisional measures period in AD and CVD investigations. See...

  12. Fabrication of a screw-retained fixed provisional prosthesis supported by dental implants.

    Science.gov (United States)

    Kökat, Ali Murat; Akça, Kivanç

    2004-03-01

    Screw-retained provisional implant-supported prostheses may have advantages over cement-retained prostheses in certain situations. This article describes a technique for fabrication of screw-retained provisional acrylic resin implant-supported prostheses from the modified metal components provided with the implant.

  13. Indirect implant-supported fixed provisional restoration in the esthetic zone: fabrication technique and treatment workflow.

    Science.gov (United States)

    Shor, Alexander; Schuler, Ralf; Goto, Yoshihiro

    2008-01-01

    Treatment objectives of an implant-supported fixed provisional restoration include shaping/preservation of the gingival soft tissue contour, functional and esthetic substitution of the missing dentition during postsurgical healing, and definitive prosthesis fabrication stages. Fixed provisional restoration can also serve as an esthetic and functional blueprint in the fabrication of the definitive restoration. Despite its common use and important indications, limited information is available on the various aspects of the provisional fabrication and treatment. This article presents a production technique and treatment workflow of a laboratory-fabricated, screw-retained fixed provisional restoration. Provisional restoration is fabricated using layering technique and internal stain characterization. The soft tissue profile of the working cast is modified according to the coronal contour of the diagnostic wax-up. Upon delivery, the provisional contour is reevaluated and modified as necessary. The developed emergence profile of the provisional restoration is transferred to the master cast via customized impression copings. Laboratory-fabricated implant-supported provisional restorations allow the esthetic and functional substitution of the missing dentition and the shaping of the soft tissue profile, and can act as a blueprint in the fabrication of definitive restorations.

  14. 78 FR 36571 - North American Datum of 1983 (NAD 83) Outer Continental Shelf (OCS) Provisional Official...

    Science.gov (United States)

    2013-06-18

    ... Official Protraction Diagrams in the Pacific Ocean, Hawaiian Islands Description/Date NF04-08 (Kaua'i... with this publication two NAD 83-based OCS Provisional OPDs that represent the Island of Oahu and... Title 43, Code of Federal Regulations, has created provisional versions of the basic record used for the...

  15. A "Jail Escape Technique" (JET) for distal side branch wiring during provisional stenting: Feasibility and first-in-man study.

    Science.gov (United States)

    Xiao, Han; Chen, Shengda; Wang, Guixue; Du, Ruolin; Song, Yaoming; Jin, Jun; Huang, Lan; Jabbour, Richard; Azzalini, Lorenzo; Zhao, Xiaohui

    2017-12-01

    To evaluate the feasibility of a novel technique for achieving distal SB access and improve strut apposition during provisional stenting. While distal rewiring and stent expansion toward the side branch (SB) are associated with better results during provisional stenting of coronary artery bifurcation lesions, these techniques are technically challenging and often leave unopposed struts near the carina. The "Jail Escape Technique" (JET) is performed by passing the proximal tip of the SB wire between the main vessel (MV) stent struts and balloon before implantation, allowing the MV stent to push the SB wire against the distal part of the carina. The MV stent can then be deployed without jailing the SB wire. Distal SB access and strut distribution at the carina were tested in phantom and swine models. Stent distortion, dislodgement forces, and material damage were evaluated with tensile testing. Human feasibility was then tested on 32 patients. Preclinical testing demonstrated that the SB wire was located at the most distal part of the carina and no strut malapposition at the carina was present after balloon inflation. Stent distortion, dislodgement forces, or material damage were not affected. JET was successfully performed in 30 of 32 patients. No major adverse cardiovascular events occurred in any patient at 6-month follow-up. The "JET" enables distal SB access and eliminates strut malapposition at the carina. Further studies with larger numbers of patients are needed to further investigate this technique. © 2017, Wiley Periodicals, Inc.

  16. Pesticide usage pattern for vegetable cultivation in Manmunai South & Eruvilpattu divisional secretariat Division of Batticaloa district, Sri Lanka

    Directory of Open Access Journals (Sweden)

    S. Sutharsan

    2014-06-01

    Full Text Available Batticaloa, is a coastal district in Sri Lanka. Vegetables except up-country vegetables sold in Batticaloa District are mainly grown in villages. Manmunai South and Eruvilpattu divisional secretariat (DS division is a predominantly vegetable cultivating area in the Batticaloa district. Farmers in this region use variety of synthetic pesticides to protect vegetables. Recently public concern related to health risks associated with pesticide residues has been increased, substantially. Therefore, a study was conducted to find out pesticide usage practices of farmers on vegetable cultivation in Manmunai South and Eruvilpattu DS division. Stratified random sampling method was used to select respondents’ for the survey and the collected data were analyzed statistically. It was observed that, the usage of pesticides was higher in the study area. Vegetable farmers use more than 14 Insecticides to control pest infestation. Farmers in the study area apply pesticides more frequently. Highly pesticide sprayed crop is Brinjal. About 66% of the Chilli producing farmers and 84% of the Brinjal producing farmers apply pesticide more than 22 times per cropping season. Around 90% of the farmers apply more than the recommended dosage and frequency of the pesticides. It was noticed that more than 89% of the farmers harvest the produce before the recommended pre harvest interval. It was found out that farmers in the study area are not following recommended pesticide usage practices. Hence, it is essential to educate the farmers on recommended pesticide usage practices, reduced usage of synthetic pesticides and use of organic farming practices to reduce the ill effects of synthetic pesticides.

  17. Early versus delayed, provisional eptifibatide in acute coronary syndromes.

    Science.gov (United States)

    Giugliano, Robert P; White, Jennifer A; Bode, Christoph; Armstrong, Paul W; Montalescot, Gilles; Lewis, Basil S; van 't Hof, Arnoud; Berdan, Lisa G; Lee, Kerry L; Strony, John T; Hildemann, Steven; Veltri, Enrico; Van de Werf, Frans; Braunwald, Eugene; Harrington, Robert A; Califf, Robert M; Newby, L Kristin

    2009-05-21

    Glycoprotein IIb/IIIa inhibitors are indicated in patients with acute coronary syndromes who are undergoing an invasive procedure. The optimal timing of the initiation of such therapy is unknown. We compared a strategy of early, routine administration of eptifibatide with delayed, provisional administration in 9492 patients who had acute coronary syndromes without ST-segment elevation and who were assigned to an invasive strategy. Patients were randomly assigned to receive either early eptifibatide (two boluses, each containing 180 microg per kilogram of body weight, administered 10 minutes apart, and a standard infusion > or = 12 hours before angiography) or a matching placebo infusion with provisional use of eptifibatide after angiography (delayed eptifibatide). The primary efficacy end point was a composite of death, myocardial infarction, recurrent ischemia requiring urgent revascularization, or the occurrence of a thrombotic complication during percutaneous coronary intervention that required bolus therapy opposite to the initial study-group assignment ("thrombotic bailout") at 96 hours. The key secondary end point was a composite of death or myocardial infarction within the first 30 days. Key safety end points were bleeding and the need for transfusion within the first 120 hours after randomization. The primary end point occurred in 9.3% of patients in the early-eptifibatide group and in 10.0% in the delayed-eptifibatide group (odds ratio, 0.92; 95% confidence interval [CI], 0.80 to 1.06; P=0.23). At 30 days, the rate of death or myocardial infarction was 11.2% in the early-eptifibatide group, as compared with 12.3% in the delayed-eptifibatide group (odds ratio, 0.89; 95% CI, 0.79 to 1.01; P=0.08). Patients in the early-eptifibatide group had significantly higher rates of bleeding and red-cell transfusion. There was no significant difference between the two groups in rates of severe bleeding or nonhemorrhagic serious adverse events. In patients who had acute

  18. VSRR - Provisional monthly and 12-month ending number of live births, deaths and infant deaths: United States

    Data.gov (United States)

    U.S. Department of Health & Human Services — https://www.cdc.gov/nchs/products/vsrr/provisional-tables.htm Monthly and 12 month-ending provisional counts of births, deaths and infant deaths are provided for the...

  19. Provisional Crown Dislodgement during Scuba Diving: A Case of Barotrauma

    Directory of Open Access Journals (Sweden)

    Meenal Nitin Gulve

    2013-01-01

    Full Text Available Changes in ambient pressure, for example, during flying, diving, or hyperbaric oxygen therapy, can lead to barotrauma. Although it may seem that this issue was neglected in dental education and research in recent decades, familiarity with and understanding of these facts may be of importance for dental practitioners. We report the case of a patient who experienced barotrauma involving dislodgement of a provisional crown during scuba diving. Patients who are exposed to pressure changes as a part of their jobs or hobbies and their dentists should know the causes of barotrauma. In addition, the clinician must be aware of the possible influence of pressure changes on the retention of dental components.

  20. [Clinical evaluation of "All-on-Four" provisional prostheses reinforced with carbon fibers].

    Science.gov (United States)

    Li, Bei-bei; Lin, Ye; Cui, Hong-yan; Hao, Qiang; Xu, Jia-bin; Di, Ping

    2016-02-18

    To assess the clinical effects of carbon fiber reinforcement on the "All-on-Four" provisional prostheses. Provisional prostheses were divided into control group and carbon fiber reinforcing group according to whether carbon fiber reinforcement was used in the provisional prostheses base resin. In our study, a total of 60 patients (32 males and 28 females) with 71 provisional prostheses(28 maxilla and 43 mandible)were enrolled between April 2008 and December 2012 for control group; a total of 23 patients (13 males and 10 females) with 28 provisional prostheses (9 maxillas and 19 mandibles) were enrolled between January 2013 and March 2014 for carbon fiber reinforcing group. The information of provisional prostheses in the patients was recorded according to preoperative examination. We used the date of definitive prosthesis restoration as the cut-off point, observing whether fracture occurred on the provisional prostheses in the two groups. Additionally we observed whether fiber exposure occurred on the tissue surface of the provisional prostheses and caused mucosal irritation. The interface between the denture base resin and the fibers was examined using scanning electron microscopy (SEM). The age [(57.3 ± 10.1) years vs.(55.1 ± 11.4) years], gender (32 males and 28 females vs. 13 males and 10 females), maxilla and mandible distributions (28 maxillas and 43 mandibles vs. 9 maxillas and 19 mandibles), the number of extraction jaws (46 vs. 23), the average using time [(7.8 ± 1.3) months vs. (7.5 ± 1.1) months], and the opposing dentition distributions of provisional prostheses of the patients showed no significant differences between the control and reinforcing groups. There were 21(29.6%) fractures that occurred on the 71 provisional prostheses in the control group; there was no fracture that occurred on the 28 provisional prosthesesin the carbon fiber reinforcing group. The fracture rate of the carbon fiber reinforcing group was significantly lower than that of

  1. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: AutoCAD 2002 - niveau 1 : 19, 20.4 et 3, 4.5.2004 (4 jours) Oracle 8i/9i - Develop Web-based Applications with PL/SQL : 19 & 20.4.2004 (2 days) Introduction to ANSYS : 20 - 23.4.2004 (4 days) LabVIEW Hands-on : 20.4.2004 (half-day, p.m.) FrontPage XP - niveau 2 : 26 & 27.4.2004 (2 jours) The Joint PVSS JCOP Framework : 26 -...

  2. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Computational Electromagnetics with the ELEKTRA Module of OPERA-3D : 27 & 28.4.2004 (2 days) Hands-on Introduction to Python Programming : 3 - 5.5.2004 (3 days) LabVIEW Base 2 : 6 & 7.5.2004 (2 jours) Project Planning with MS-Project : 6 & 13.5.2004 (2 days) Word 2003 - niveau 1 : 10 & 11.5.2004 (2 jours) Oracle 9i : SQL : 10 - 12.5.2004 (3...

  3. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study for Microsoft applications :12.2.2004 (morning) Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) CLEAN-2002 ...

  4. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 26.2.2004 (morning) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Pa...

  5. Technical Training: Places available

    CERN Document Server

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW base 1 : 25 - 27.2.2004(3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 26.2.2004 (morning) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) LabVIEW hands-on (E) : 16.3.2004 (afternoon) LabVIEW Basics 1 : 22 - 24.3.2004 ...

  6. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) Introduction to the CERN EDMS : 9.3.2004 (1 day, free of charge) The EDMS MTF in Practice : 10.3.2004 (morning, free of charge) CLEAN-2002: Working in a Cleanroom : 10.3.2004 (afternoon, free of charge) The CERN EDMS for Engineers : 11.3.2004 (1 day, free of charge) LabVIEW hands-on (E):...

  7. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Project Planning with MS-Project :6 & 13.5.2004 (2 days) Word 2003 - niveau 1 : 10 & 11.5.2004 (2 jours) Oracle 9i : SQL : 17 - 19.5.2004 (3 days) Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) EXCEL 2003 - niveau 1: 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1 : 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL : 2 - 4.6.2...

  8. Technical Training: Places Available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval - Tel.74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Oracle 9i: SQL: 17 - 19.5.2004 (3 days) Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) EXCEL 2003 - niveau 1 : 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1: 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL: 2 - 4.6.2004 (3 days) CST Microwave Studio: 3 & 4.6.2004 (2 days) Oracle 9i : New f...

  9. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval - Tel.74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) VisualEliteHDL : 25 & 26.5.2004 (2 days) EXCEL 2003 - niveau 1 : 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1: 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL: 2 - 4.6.2004 (3 days) CST Microwave Studio: 3 & 4.6.2004 (2 days) Oracle 9...

  10. TECHNICAL TRAINING: Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Hands-on Introduction to Python Programming : 12 - 14.11.03(3 days) ACCESS 2000 - niveau 1 : 13 & 14.11.03 (2 jours) C++ for Particle Physicists : 17 - 21.11.03 (6 X 3-hour lectures) Programmation automate Schneider TSX Premium - niveau 2 : 18 - 21.11.03 (4 jours) Project Planning with MS-Project  (free of charg...

  11. TECHNICAL TRAINING: Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval Tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The EDMS-MTF in practice (free of charge) : 28 -  30.10.03 (6 half-day sessions) AutoCAD 2002 – Level 1 : 3, 4, 12, 13.11.03 (4 days) LabVIEW TestStand ver. 3 : 4 & 5.11.03 (2 days) Introduction to PSpice : 4.11.03 p.m. (half-day) Hands-on Introduction to Python Programming : 12 – 14.11.03 (3 days) ACCESS ...

  12. Technical Training: Places available**

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1 : 9 & 10.1.2004 (2 days) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 ( 6 X 4-hour sessions) LabVIEW hands-on (E) 16.3...

  13. VSRR - State and National Provisional Counts for Live Births, Deaths, and Infant Deaths

    Data.gov (United States)

    U.S. Department of Health & Human Services — NOTES: Figures include all revisions received from the states and, therefore, may differ from those previously published. Data are provisional and are subject to...

  14. Using a fixed provisional prosthesis during post-extraction healing and implant placement.

    Science.gov (United States)

    McArdle, Barry F

    2006-03-01

    Most dental patients insist on the use of provisional prostheses throughout healing and osseointegration when replacing extracted teeth with implants in esthetically sensitive areas. Removable appliances of some kind are normally used for this purpose, but patients often consider them to be too cumbersome. This can lead to decreased case acceptance and compliance with the use of the provisional restoration, which can compromise the final result of treatment. Custom fixed solutions to this problem exist, but they tend to be more complicated, less practical, and more expensive than other options now available. The Monodont bridge, a new system of prefabricated components for the creation of provisional fixed partial dentures, can be more esthetic, more retentive, more functional, more cost-effective, and more universally applicable than any other available techniques. This can raise patient tolerance of provisional prostheses and thus increase case acceptance, while fostering a more predictable esthetic result with regard to soft tissue contours and emergence profile.

  15. Technical Training: CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Would you need to enhance your skills in Microsoft Office applications or Outlook? A new "blended learning" course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training (WBTechT) Course for Microsoft Applications. The next session will take place on April 1st, morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while ...

  16. A provisional gene regulatory atlas for mouse heart development.

    Science.gov (United States)

    Chen, Hailin; VanBuren, Vincent

    2014-01-01

    Congenital Heart Disease (CHD) is one of the most common birth defects. Elucidating the molecular mechanisms underlying normal cardiac development is an important step towards early identification of abnormalities during the developmental program and towards the creation of early intervention strategies. We developed a novel computational strategy for leveraging high-content data sets, including a large selection of microarray data associated with mouse cardiac development, mouse genome sequence, ChIP-seq data of selected mouse transcription factors and Y2H data of mouse protein-protein interactions, to infer the active transcriptional regulatory network of mouse cardiac development. We identified phase-specific expression activity for 765 overlapping gene co-expression modules that were defined for obtained cardiac lineage microarray data. For each co-expression module, we identified the phase of cardiac development where gene expression for that module was higher than other phases. Co-expression modules were found to be consistent with biological pathway knowledge in Wikipathways, and met expectations for enrichment of pathways involved in heart lineage development. Over 359,000 transcription factor-target relationships were inferred by analyzing the promoter sequences within each gene module for overrepresentation against the JASPAR database of Transcription Factor Binding Site (TFBS) motifs. The provisional regulatory network will provide a framework of studying the genetic basis of CHD.

  17. A provisional gene regulatory atlas for mouse heart development.

    Directory of Open Access Journals (Sweden)

    Hailin Chen

    Full Text Available Congenital Heart Disease (CHD is one of the most common birth defects. Elucidating the molecular mechanisms underlying normal cardiac development is an important step towards early identification of abnormalities during the developmental program and towards the creation of early intervention strategies. We developed a novel computational strategy for leveraging high-content data sets, including a large selection of microarray data associated with mouse cardiac development, mouse genome sequence, ChIP-seq data of selected mouse transcription factors and Y2H data of mouse protein-protein interactions, to infer the active transcriptional regulatory network of mouse cardiac development. We identified phase-specific expression activity for 765 overlapping gene co-expression modules that were defined for obtained cardiac lineage microarray data. For each co-expression module, we identified the phase of cardiac development where gene expression for that module was higher than other phases. Co-expression modules were found to be consistent with biological pathway knowledge in Wikipathways, and met expectations for enrichment of pathways involved in heart lineage development. Over 359,000 transcription factor-target relationships were inferred by analyzing the promoter sequences within each gene module for overrepresentation against the JASPAR database of Transcription Factor Binding Site (TFBS motifs. The provisional regulatory network will provide a framework of studying the genetic basis of CHD.

  18. Effect of nightguard vital bleaching gel on the color stability of provisional restorative materials

    OpenAIRE

    Salwa Omar Bajunaid

    2016-01-01

    Purpose: To assess the hypothesis that there was no difference in effect of 10% and 15% tooth bleaching agents on color stability of materials used for provisional fixed dental prosthesis. Methodology: Fifteen samples from two materials used for provisional fixed dental prosthesis: methacrylate-based and composite-based materials and 15 preformed polycarbonate crowns soaked in bleaching gel or distilled water. Spectrophotometer recorded color of specimens at baseline, after 3, 7, and 14 d...

  19. Evaluation of surface physical properties of acrylic resins for provisional prosthesis

    OpenAIRE

    Sérgio Paulo Hilgenberg; Emigdio Enrique Orellana-Jimenez; Wilmer Fabian Sepúlveda-Navarro; Beatriz Elena Arana-Correa; Dario César Teixeira Alves; Nara Hellen Campanha

    2008-01-01

    Acrylic resins used for provisional prostheses should have satisfactory superficial characteristics in order to ensure gingival health and low bacterial attachment. The purpose of the present study was to evaluate the superficial roughness and contact angle after two types of polishing and the Vickers hardness of three acrylic resins (Duralay - G1, Dencrilay - G2, and Dencor - G3), all shade 66, indicated for provisional fixed prostheses. Five 20 x 3 ± 1 mm diameter discoid specimens were obt...

  20. In Vitro Fit and Cementation Resistance of Provisional Crowns for Single Implant-Supported Restorations

    OpenAIRE

    Moris,Izabela Cristina Maurício; Oliveira,Juliana Elias de; Faria,Adriana Cláudia Lapria; Ribeiro,Ricardo Faria; Rodrigues,Renata Cristina Silveira

    2015-01-01

    Abstract: This study aimed to verify marginal fit and the effect of cement film thickness standardization on retention of provisional crowns made with prefabricated acrylic cylinders on abutments, using two temporary luting agents subjected or not to mechanical cycling. Provisional crowns were made from bis-acryl (Luxatemp Fluorescence) or methyl methacrylate (Duralay) resins on acrylic cylinders and marginal fit and cement film thickness were evaluated. For retention evaluation, crowns were ...

  1. Clinical evaluation of a visible light-cured indirect composite for long-term provisionalization.

    Science.gov (United States)

    Ewoldsen, Nels; Sundar, Veeraraghavan; Bennett, William; Kanya, Kevin; Magyar, Karl

    2008-01-01

    To clinically evaluate a visible light-cured (VLC) resin composite system for long-term provisional and esthetic diagnostic restorations, fabricated using indirect techniques. One-hundred and nine teeth were restored in 31 patients. Preoperational impressions were used to create VLC resin composite restorations (Radica) using indirect techniques. Restorations were relined as necessary and placed using various provisional cements at a follow-up appointment, subsequent to preparation of the teeth. Both fabricating laboratory technicians and placing dentists rated the restorations for acceptability in esthetics, marginal fit, occlusion, and functionality in various stages of provisionalization. All restorations (100%) were rated acceptable for esthetics prior to relining. After relining, a majority (93-100%) of restorations were rated acceptable in esthetic and functional criteria. At the placement of the permanent restoration, a majority (96-100%) of restorations were rated acceptable in esthetic and functional criteria. Terms of service ranged from two to seventy-six days. In combination with in vitro results, the clinical performance of the Radica VLC system for provisionalization and esthetic diagnostic restorations was judged to be acceptable. The system offers esthetics that are superior to conventional provisional restorations, and should be a valuable option to practitioners considering longer-term provisionalization in complex cases.

  2. Molecular characterization of serologically atypical provisional serovars of Shigella isolates from Kolkata, India.

    Science.gov (United States)

    Dutta, Shanta; Jain, Priyanka; Nandy, Suman; Matsushita, Shigeru; Yoshida, Shin-ichi

    2014-12-01

    During 2000-2004, 13 Shigella strains that were untypable by commercially available antisera were isolated from children Shigella dysenteriae provisional serovar 204/96 (n = 3), Shigella dysenteriae provisional serovar E23507 (n = 1), Shigella dysenteriae provisional serovar I9809-73 (n = 1), Shigella dysenteriae provisional serovar 93-119 (n = 1), Shigella flexneri provisional serovar 88-893 (n = 6) and Shigella boydii provisional serovar E16553 (n = 1). In this study, characterization of those provisional serovars of Shigella was performed with respect to their antimicrobial resistance, plasmids, virulence genes and PFGE profiles. The drug resistant strains (n = 10) of Shigella identified in this study possessed various antibiotic resistance genetic markers like catA (for chloramphenicol resistance); tetA and tetB (for tetracycline resistance); dfrA1 and sul2 (for co-trimoxazole resistance); aadA1, strA and strB (for streptomycin resistance) and blaOXA-1 (for ampicillin resistance). Class 1 and/or class 2 integrons were present in eight resistant strains. Three study strains were pan-susceptible. A single mutation in the gyrA gene (serine to leucine at codon 83) was present in four quinolone resistant strains. The virulence gene ipaH (invasion plasmid antigen H) was uniformly present in all strains in this study, but the stx (Shiga toxin) and set1 (Shigella enterotoxin 1) genes were absent. Other virulence genes like ial (invasion associated locus) and sen (Shigella enterotoxin 2) were occasionally present. A large plasmid of 212 kb and of incompatibility type IncFIIA was present in the majority of the strains (n = 10) and diversity was noticed in the smaller plasmid profiles of these strains even within the same provisional serovars. PFGE profile analysis showed the presence of multiple unrelated clones among the isolates of provisional Shigella serovars. To the best of our knowledge, this is the first report on the phenotypic and

  3. Developing a provisional and national renal disease registry for Iran

    Directory of Open Access Journals (Sweden)

    Sima Ajami

    2015-01-01

    Full Text Available Background: Disease registry is a database that includes information about people suffering a special kind of disease. The aim of this study was to first identify and compare the National Renal Disease Registry (NRDR characteristics in some countries with Iran; and second, develop a provisional and NRDR for Iran. Materials and Methods: Retrieval of data of the NRDR was performed by scholars responsible in related agencies, including the Ministry of Health and Medical Education, Renal Disease charity, and data registries in the United States, United Kingdom, Malaysia, and Iran. This research was applied, and the study was descriptive-comparative. The study population consisted of the NRDR in selected countries in which data were collected by forms that were designed according to the study objectives. Sources of data were researchers, articles, books, journals, databases, websites, related documents, and people who are active in this regard, and related agencies, including the Ministry of Health and Medical Education, and patient support charity. The researchers collected data for each country based on the study objectives and then put them in comparative tables. Data were analyzed by descriptive, comparative, and theoretical methods. Results: Most of the renal transplant teams report their own results as a single center experiences. America and Britain have a preeminent national registry of renal disease compared to other countries. Conclusion: Given that control, prevention, and treatment of chronic renal diseases incur high expenses and the disease is one of leading mortality factors in Iran and across the world and since national registry system for chronic renal diseases can provide better tools and strategies to manage and evaluate patients′ characteristics as well as risk factors which eventually leads to making better decisions.

  4. A study on provisional cements, cementation techniques, and their effects on bonding of porcelain laminate veneers.

    Science.gov (United States)

    Vinod Kumar, G; Soorya Poduval, T; Bipin Reddy; Shesha Reddy, P

    2014-03-01

    Minimal tooth preparation is required for porcelain laminate veneers, but interim restorations are a must to protect their teeth against thermal insult, chemical irritation, and to provide aesthetics. Cement remaining after the removal of the provisional restoration can impair the etching quality of the tooth surface and fit and final bonding of the porcelain laminate veneer. This in vitro study examined the tooth surface for remaining debris of cement after removal of a provisional restoration. Determine the presence of cement debris on prepared tooth surface subsequent to the removal of provisional restoration. Determine the cement with the least residue following the cleansing procedures. Determine the effect of smear layer on the amount of residual luting cement. Eighty-four extracted natural anterior teeth were prepared for porcelain laminate veneers. For half of the teeth, the smear layer was removed before luting provisional restorations. Veneer provisional restorations were fabricated and luted to teeth with six bonding methods: varnish combined with glass ionomer cement (GIC), varnish combined with resin modified GIC, varnish, spot etching combined with dual-cure luting cement, adhesive combined with GIC, adhesive combined with resin modified GIC, and adhesive, spot etching combined with dual-cure luting cement. After removal of provisional restorations 1 week later, the tooth surface was examined for residual luting material with SEM. Traces of cement debris were found on all the prepared teeth surfaces for all six groups which were cemented with different methods. Cement debris was seen on teeth subsequent to the removal of provisional's. Dual-cure cement had the least residue following the cleansing procedures. Presence of smear layer had no statistical significance in comparison with cement residue. With the use of adhesive the cement debris was always found to be more than with the use of varnish. GIC showed maximum residual cement followed by dual-cure.

  5. Effect of different provisional cement remnant cleaning procedures including Er:YAG laser on shear bond strength of ceramics

    OpenAIRE

    Zortuk, Mustafa; Gumus, Hasan Onder; Kilinc, Halil Ibrahim; Tuncdemir, Ali Riza

    2012-01-01

    PURPOSE The purpose of this study was to evaluate the effect of provisional cement removal by different dentin cleaning protocols (dental explorer, pumice, cleaning bur, Er:YAG laser) on the shear bond strength between ceramic and dentin. MATERIALS AND METHODS In total, 36 caries-free unrestored human third molars were selected as tooth specimens. Provisional restorations were fabricated and cemented with eugenol-free provisional cement. Then, disc-shaped ceramic specimens were fabricated and...

  6. Mechanical properties of four methylmethacrylate-based resins for provisional fixed restorations.

    Science.gov (United States)

    Hernandez, E P; Oshida, Y; Platt, J A; Andres, C J; Barco, M T; Brown, D T

    2004-01-01

    The use of a provisional restoration is an important phase in the treatment of the dental prosthetic patient. A good provisional restoration should satisfy the following requirements: pulpal protection, positional stability, ease in cleaning, accurate margins, wear resistance, dimensional stability, and serve as a diagnostic aid in treatment assessment and esthetics. There is a tendency for discoloration, occlusal wear, and fracture that eventually leads to unnecessary repair. Heat-processed and reinforced methacrylate-based resins have been used to improve the mechanical and physical properties of provisional restorations. Among various improvements, the interpenetrating network crosslinked PMMA (IPN) has been shown to have superior mechanical properties if manufactured through a dough compression molding process at 130 degrees C. However, there have been no published data that relate with the use of this material for fixed provisional restorations. The objective of this study was to compare four methyl methacrylate-based resins for provisional crowns and bridges with varying processing cycles, including JET [self-cure], ACRALON [heat-cured], titanium dioxide filled PMMA [heat-cured], and IPN [heat-cured denture tooth resin]. Properties studied included transverse strength, toughness, rigidity, and hardness. From the results of this study the following conclusions can be made: the IPN group may have had a lower degree of conversion as demonstrated by decreased strength, toughness, and hardness data as compared with Acralon. Increasing the polymerization cycle of unmodified Acralon resin causes a significant increase in strength.

  7. Cell Adhesion to Acrylic Custom Provisional Abutment Placed on an Immediate Implant: A Case Report.

    Science.gov (United States)

    Saito, Hanae; Hsia, Ru-Ching; Tarnow, Dennis P; Reynolds, Mark A

    2017-02-01

    This article presents the results of a scanning electron microscope (SEM) analysis of the surface of an acrylic custom provisional abutment following first disconnection from a post-extraction immediate implant placement. An implant was placed immediately after extraction, the site was grafted, and a barrier membrane was adapted for graft containment. A custom acrylic shell was then relined, polished, and steam-cleaned prior to being screwed onto the implant. After 5 months of undisturbed healing, the custom provisional abutment was disconnected for the first time and processed for SEM examination. The surface of the custom acrylic abutment revealed well-spread fibroblast-like cells with filopodia inserting into the porous surface. These observations suggest that the surface topography of the acrylic provisional restoration/ abutment can function as a substratum for cellular adhesion and may serve an important role in supporting peri-implant mucosa at the time of immediate implant placement.

  8. Immediate provisional restoration of a single-tooth implant in the esthetic zone: A case report

    Directory of Open Access Journals (Sweden)

    Po-Sung Fu

    2011-02-01

    Full Text Available Immediate implant restoration of single implants may demonstrate a positive effect on peri-implant soft tissue. Placement of a provisional restoration following implant surgery can create soft tissue contours that resemble normal gingival topography before placement of the definitive prosthesis. This article describes a staged approach of the mandibular permanent right central incisor, which was congenital missing. The proper space for restoration of the missing incisor was created through orthodontic treatment. The scheduled implant site was reconstructed using autogenous bone harvested from the chin region. After a healing period of four months, an implant was installed with the connection of a fixed provisional crown to a prefabricated temporary abutment. The soft tissue around the implant healed according to the contours of the provisional restoration and the emergence profile was used to duplicate the definitive restoration. Peri-implant esthetics was achieved through the staged approach and immediate restoration of the implant.

  9. Antibacterial effect of polyethyleneimine nanoparticles incorporated in provisional cements against Streptococcus mutans.

    Science.gov (United States)

    Shvero, Dana Kesler; Davidi, Michael Perez; Weiss, Ervin I; Srerer, Nir; Beyth, Nurit

    2010-08-01

    Frequently provisional restorations require long-term permanence in the oral cavity, thus an antibacterial effect is desirable. We hypothesized that this effect may be achieved by incorporating polyethyleneimine (PEI) nanoparticles into provisional cements. The nanoparticles antibacterial effect incorporated at 0.5%, 1%, and 2% w/w into provisional cement, was studied in vitro. The antibacterial effect against Streptococcus mutans and Enterococcus faecalis was tested using direct contact test. The data was analyzed using the ANOVA test, with the Dunnett test for multiple pairwise comparisons. A strong antibacterial effect was evident in all test groups after an aging period of 14 days against S. mutans and E. faecalis (p faecalis (p faecalis for a period of 14 days. The minimum effective concentration suggested is 1% w/w. Incorporation of nanoparticles may prevent caries and inflammation, and thereby improve the results of the prosthetic treatment. Further investigation is necessary on the effect on mechanical properties and clinical relevance.

  10. Microleakage of Glass Ionomer-based Provisional Cement in CAD/CAM-Fabricated Interim Crowns: An in vitro Study.

    Science.gov (United States)

    Farah, Ra'fat I; Al-Harethi, Naji

    2016-10-01

    The aim of this study was to compare in vitro the marginal microleakage of glass ionomer-based provisional cement with resin-based provisional cement and zinc oxide non-eugenol (ZONE) provisional cement in computer-aided design and computer-aided manufacturing (CAD/CAM)-fabricated interim restorations. Fifteen intact human premolars were prepared in a standardized manner for complete coverage of crown restorations. Interim crowns for the prepared teeth were then fabricated using CAD/CAM, and the specimens were randomized into three groups of provisional cementing agents (n = 5 each): Glass ionomer-based provisional cement (GC Fuji TEMP LT™), bisphenol-A-glycidyldimethacrylate (Bis-GMA)/ triethylene glycol dimethacrylate (TEGDMA) resin-based cement (UltraTemp® REZ), and ZONE cement (TempBond NE). After 24 hours of storage in distilled water at 37°C, the specimens were thermocycled and then stored again for 24 hours in distilled water at room temperature. Next, the specimens were placed in freshly prepared 2% aqueous methylene blue dye for 24 hours and then embedded in autopolymerizing acrylic resin blocks and sectioned in buccolingual and mesiodistal directions to assess dye penetration using a stereomicroscope. The results were statistically analyzed using a nonparametric Kruskal-Wallis test. Dunn's post hoc test with a Bonferroni correction test was used to compute multiple pairwise comparisons that identified differences among groups; the level of significance was set at p glass ionomer-based provisional cement and the ZONE cement. The provisional cementing agents exhibited different sealing abilities. The Bis-GMA/TEGDMA resin-based provisional cement exhibited the most effective favorable sealing properties against dye penetration compared with the glass ionomer-based provisional cement and conventional ZONE cement. Newly introduced glass ionomer-based provisional cement proved to be inferior to resin-based provisional cement as far as marginal microleakage

  11. Myeloid Neoplasms with Germline Predisposition: A New Provisional Entity Within the World Health Organization Classification.

    Science.gov (United States)

    Czuchlewski, David R; Peterson, LoAnn C

    2016-03-01

    The forthcoming update of the World Health Organization (WHO) classification of hematopoietic neoplasms will feature "Myeloid Neoplasms with Germline Predisposition" as a new provisional diagnostic entity. This designation will be applied to some cases of acute myeloid leukemia and myelodysplastic syndrome arising in the setting of constitutional mutations that render patients susceptible to the development of myeloid malignancies. For the diagnostic pathologist, recognizing these cases and confirming the diagnosis will demand a sophisticated grasp of clinical genetics and molecular techniques. This article presents a concise review of this new provisional WHO entity, including strategies for clinical practice. Copyright © 2016 Elsevier Inc. All rights reserved.

  12. Technical Training: CLEAN-2002: Working in a Cleanroom

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch CERN Technical Training Programme: Learning for the LHC! CLEAN-2002 is a free of charge, half-day seminar in the context of Technical Training for the LHC. The course is designed for personnel working or managing activities in an assembly cleanroom, for example physicists, engineers and technicians working at or visiting the laboratory. CLEAN-2002 is aimed at raising awareness about good working practices in a cleanroom, and at providing practical examples, analysis tools, and documentation. Specific ...

  13. Technical Training: CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Would you need to enhance your skills in Microsoft Office applications or Outlook ? A new "blended learning" course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training course for Microsoft Applications. The next session will take place on February 26, Thursday morning. Course sessions will be self-paced and self-directed, with participants being in control of their learning, while ...

  14. Technical Training: CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Would you need to enhance your skills in Microsoft Office applications or Outlook ? A new "blended learning" course, combining instructor-led and computer-based multimedia training, is now offered by Technical Training: the Instructor-led CERN Web-Based Technical Training course for Microsoft Applications. The next sessions will take place on the 19 and 26 February (Thursday mornings), with 8 participants at most. Course sessions will be self-paced and self-directed, with participants...

  15. Fracture Strength and Failure Mode of Maxillary Implant-Supported Provisional Single Crowns : A Comparison of Composite Resin Crowns Fabricated Directly Over PEEK Abutments and Solid Titanium Abutments

    NARCIS (Netherlands)

    Santing, H.J.; Meijer, Henny J.A.; Raghoebar, G.M.; Ozcan, M.

    2012-01-01

    Background: Polyetheretherketone (PEEK) temporary abutments have been recently introduced for making implant-supported provisional single crowns. Little information is available in the dental literature on the durability of provisional implant-supported restorations. Purpose: The objectives of this

  16. 77 FR 63801 - Aqua-Leisure Industries, Inc., Provisional Acceptance of a Settlement Agreement and Order

    Science.gov (United States)

    2012-10-17

    ... COMMISSION Aqua-Leisure Industries, Inc., Provisional Acceptance of a Settlement Agreement and Order AGENCY... Agreement with Aqua-Leisure Industries, Inc., containing a civil penalty of $650,000.00, within twenty (20... AMERICA CONSUMER PRODUCT SAFETY COMMISSION In the Matter of: Aqua-Leisure Industries, Inc. CPSC Docket No...

  17. 75 FR 1356 - RC2 Corporation, Provisional Acceptance of a Settlement Agreement and Order

    Science.gov (United States)

    2010-01-11

    ... nationwide, and secondarily through RC2's e-commerce websites or as `sub-components' of retail items... through RC2's e-commerce Web sites or as `sub-components' of retail items distributed independently of RC2... accordance with the terms of 16 CFR 1118.20(e). Published below is a provisionally-accepted Settlement...

  18. 77 FR 4023 - Hewlett-Packard Company, Provisional Acceptance of a Settlement Agreement and Order

    Science.gov (United States)

    2012-01-26

    ... COMMISSION Hewlett-Packard Company, Provisional Acceptance of a Settlement Agreement and Order AGENCY... Agreement with Hewlett-Packard Company, containing a civil penalty of $425,000.00, within twenty (20) days... 1118.20, Hewlett-Packard Company (``HP'') and the staff (``Staff'') of the United States Consumer...

  19. 75 FR 23745 - Jo-Ann Stores, Inc., Provisional Acceptance of a Settlement Agreement and Order

    Science.gov (United States)

    2010-05-04

    ... Robbie Ducky products at its retail stores nationwide during those periods for between $5 and $10 per... COMMISSION Jo-Ann Stores, Inc., Provisional Acceptance of a Settlement Agreement and Order AGENCY: Consumer... Agreement with Jo-Ann Stores, Inc., containing a civil penalty of $50,000.00. DATES: Any interested person...

  20. Effect of nightguard vital bleaching gel on the color stability of provisional restorative materials

    Directory of Open Access Journals (Sweden)

    Salwa Omar Bajunaid

    2016-01-01

    Conclusions: Composite-based provisional material showed highest color stability when exposed to vital tooth bleaching gel, whereas methacrylate-based material was the least color stable. Polycarbonate crowns were more color stable when exposed to 15% bleaching gel as opposed to 10% bleaching gel.

  1. Effect of nightguard vital bleaching gel on the color stability of provisional restorative materials.

    Science.gov (United States)

    Bajunaid, Salwa Omar

    2016-01-01

    To assess the hypothesis that there was no difference in effect of 10% and 15% tooth bleaching agents on color stability of materials used for provisional fixed dental prosthesis. Fifteen samples from two materials used for provisional fixed dental prosthesis: methacrylate-based and composite-based materials and 15 preformed polycarbonate crowns soaked in bleaching gel or distilled water. Spectrophotometer recorded color of specimens at baseline, after 3, 7, and 14 days. Data were statistically analyzed using two-factor ANOVA test to compare the color stability of tested materials. Methyl-based provisional material exhibited statistically higher color change when exposed to 10% and 15% bleaching gel (delta EFNx01: 9.0 and 11.1, respectively) as compared to distilled water (delta EFNx01: 2.9). Delta EFNx01 of composite-based material specimens exposed to distilled water was statistically higher (6.3) than specimens exposed to 10% and 15% bleaching gel (1.5 and 1.1, respectively). Polycarbonate crowns showed a statistically lower color change when exposed to 15% (0.9) than to 10% bleaching gel (5.1) or distilled water (5.5). Composite-based provisional material showed highest color stability when exposed to vital tooth bleaching gel, whereas methacrylate-based material was the least color stable. Polycarbonate crowns were more color stable when exposed to 15% bleaching gel as opposed to 10% bleaching gel.

  2. 76 FR 49453 - CVS Pharmacy, Inc., Provisional Acceptance of a Settlement Agreement and Order

    Science.gov (United States)

    2011-08-10

    ... COMMISSION CVS Pharmacy, Inc., Provisional Acceptance of a Settlement Agreement and Order AGENCY: Consumer... Agreement with CVS Pharmacy, Inc., containing a civil penalty of $45,000.00. DATES: Any interested person... 1. In accordance with 16 CFR 1118.20, CVS Pharmacy, Inc. (``CVS'') and the U.S. Consumer Product...

  3. A provisional check list of the reptiles and amphibians of Golden Gate Highlands National Park

    Directory of Open Access Journals (Sweden)

    M.F. Bates

    1991-09-01

    Full Text Available A provisional check list of 26 reptile and amphibian species (8 frog, 8 lizard and 10 snake species occurring in Golden Gate Highlands National Park is presented. The list does not reflect the results of an intensive survey, but is a record of specimens collected in the park and preserved at the National Museum, Bloemfontein.

  4. 75 FR 26939 - Target Corporation: Provisional Acceptance of a Settlement Agreement and Order

    Science.gov (United States)

    2010-05-13

    ... settlements which it provisionally accepts under the Consumer Product Safety Act in the Federal Register in... pursuant to the Consumer Product Safety Act, 15 U.S.C. 2051-2089 (``CPSA''). The Commission is responsible...'s products consisting of the following models: Truck Carry Case; Tiny Playground Set/Dream House...

  5. Comparative in vitro evaluation of CAD/CAM vs conventional provisional crowns

    Directory of Open Access Journals (Sweden)

    Adil Othman ABDULLAH

    Full Text Available ABSTRACT Objective This study compared the marginal gap, internal fit, fracture strength, and mode of fracture of CAD/CAM provisional crowns with that of direct provisional crowns. Material and Methods An upper right first premolar phantom tooth was prepared for full ceramic crown following tooth preparation guidelines. The materials tested were: VITA CAD-Temp®, Polyetheretherketone “PEEK”, Telio CAD-Temp, and Protemp™4 (control group. The crowns were divided into four groups (n=10, Group1: VITA CAD-Temp®, Group 2: PEEK, Group 3: Telio CAD-Temp, and Group 4: Protemp™4. Each crown was investigated for marginal and internal fit, fracture strength, and mode of fracture. Statistical analysis was performed using GraphPad Prism software version 6.0. Results The average marginal gap was: VITA CAD-Temp® 60.61 (±9.99 µm, PEEK 46.75 (±8.26 µm, Telio CAD-Temp 56.10 (±5.65 µm, and Protemp™4 193.07(±35.96 µm (P0.05. Conclusions CAD/CAM fabricated provisional crowns demonstrated superior fit and better strength than direct provisional crowns.

  6. NGE64/19: Regulaci??n de la jornada laboral, con car??cter provisional

    OpenAIRE

    Universidad de Granada

    2012-01-01

    Resoluci??n de la Gerencia, de 10 de septiembre de 2012, por la que se regula la jornada laboral, con car??cter provisional, para dar cumplimiento a lo establecido en la Ley 2/2012 y en el Real Decreto Ley 20/2012.

  7. 75 FR 55777 - Pro-Pac Distributing Corp., Provisional Acceptance of a Settlement Agreement and Order

    Science.gov (United States)

    2010-09-14

    ... COMMISSION Pro-Pac Distributing Corp., Provisional Acceptance of a Settlement Agreement and Order AGENCY... Agreement with Pro-Pac Distributing Corp., containing a civil penalty of $125,000.00. DATES: Any interested... STATES OF AMERICA CONSUMER PRODUCT SAFETY COMMISSION In the Matter of: Pro-Pac Distributing Corp...

  8. Quality Improvement in Initial Teacher Training and Co-operation in Distance Education in Asia: Interim Statement and Action Plans. Commonwealth Secretariat-UNESCO Regional Roundtable (Penang, Malaysia, October 24-November 4, 1992).

    Science.gov (United States)

    United Nations Educational, Scientific, and Cultural Organization, Bangkok (Thailand).

    This publication reports on the Commonwealth Secretariat UNESCO Regional Roundtable, which was held in Penang, Malaysia as a follow-up to the 1992 Colloquium on Alternatives in Initial Teacher Training, held in Colombo, Sri Lanka. There were 28 participants from Bangladesh, India, Maldives, Pakistan, Sri Lanka, Indonesia, Malaysia, Philippines,…

  9. Graduate Periodontics Programs' Integration of Implant Provisionalization in Core Curricula: Implementation of CODA Standard 4-10.2.d.

    Science.gov (United States)

    Barwacz, Christopher A; Pantzlaff, Ed; Allareddy, Veerasathpurush; Avila-Ortiz, Gustavo

    2017-06-01

    The aim of this descriptive study was to provide an overview of the status of implementation of Commission on Dental Accreditation (CODA) Standard 4-10.2.d (Provisionalization of Dental Implants) by U.S. graduate periodontics programs since its introduction in 2013. Surveys were sent in May 2015 to 56 accredited postdoctoral periodontics program directors to ascertain program director characteristics; status of planning, implementation, and curriculum resulting from adoption of Standard 4-10.2.d; preferred clinical protocols for implant provisionalization; interdisciplinary educational collaborators; and competency assessment mechanisms. The survey response rate was 52% (N=29); the majority were male, aged 55 or older, and had held their position for less than ten years. Among the responding programs, 93% had formal educational curricula established in implant provisionalization. Graduate periodontics (96%) and prosthodontics (63%) faculty members were predominantly involved with curriculum planning. Of these programs, 96% used immediate implant provisionalization, with direct (chairside) provisionalization protocols (86%) being preferred over indirect protocols (14%) and polyethylethylketone provisional abutments (75%) being preferred to titanium (25%) provisional abutments. Straight and concave transmucosal emergence profile designs (46% each) were preferred in teaching, with only 8% of programs favoring convex transmucosal profiles. A majority of responding programs (67%) lacked protocols for communicating to the restorative referral a mechanism to duplicate the mature peri-implant mucosal architecture. Regional location did not play a significant role in any educational component related to implant provisionalization for these graduate periodontal programs. Overall, this study found that a clear majority of graduate periodontics programs had established formal curricula related to implant provisionalization, with substantial clinical and philosophical consensus

  10. ORGANIZATIONAL CHANGE AND COMMUNICATION IN QUALITY SERVICE IMPROVEMENT FOR USERS OF THE INFORMATION TECHNOLOGY AT THE STATE SECRETARIAT OF FINANCE OF PERNAMBUCO

    Directory of Open Access Journals (Sweden)

    Clara Emilie Boeckmann

    2007-01-01

    Full Text Available The State Secretariat of Finance of Pernambuco (SEFAZ, has developed since 1997 an extensive program of modernization, mainly concerning Information Technology (IT, encompassing in its Management Model, the organizational changes that place serious challenges to the management of IT inside SEFAZ, especially regarding the users support. This work has had as main objectives, to identify and to evaluate the existing difficulties concerning IT at SEFAZ, concentrating attention on the users support, focusing the problems in the context of the organizational change and organizational communication. A questionnaire was applied to 120 employees. The results indicated positive scenes of the relation between the users and the IT structure, the satisfaction related to the majority of the evaluated items, including positive pointers of 100%. However, although 92% recognize that IT is very important in the accomplishment of their activities, 68% do not know about the modernization of the change processes, making the process of IT adaptation a difficult task. A plan of management to the users support must be elaborated, including resources that promote a new culture of internal communication and strategies of the organizational change.

  11. Vector-controlled alveolar distraction osteogenesis using an implant-fixed provisional prosthesis: a case report.

    Science.gov (United States)

    Kawashima, Wataru; Takayama, Kenichi; Fujii, Ryosuke; Matsubara, Yuuri; Kirita, Tadaaki

    2013-02-01

    This is a case report of anterosuperior alveolar distraction using an implant-fixed provisional prosthesis. Osteotomy and placement of a distraction device were performed in a healthy 69-year-old woman. To avoid lingual inclination during the distraction period, the device's rod was buried in the labial side of a provisional prosthesis supported by posterior implants. The mandibular bone was obliquely distracted by 0.3 mm every 2 days. Implant insertion was performed, and a good prognosis was anticipated. Inclination is thought to be caused by soft tissue on the lingual side. Many reports propose methods to avoid inclination, but these methods require established support from the teeth and cannot be adapted for an edentulous case. The method reported here is useful for distraction osteogenesis because it can be adapted for edentulous cases.

  12. A provisional bibliography of Asian martial arts periodicals published in Spain (1961-2009

    Directory of Open Access Journals (Sweden)

    Carlos Gutiérrez-García

    2012-07-01

    Full Text Available A provisional bibliography about Asian martial arts periodicals published in Spain from 1961, first journal’s publication date, to 2009 is presented. Asian martial arts journals were just included for preparing this bibliography. Main public documentary centres as well as personal archives were visited for information searching and data mining. Analysis process was complex due to the scarce number of this kind of publications collected in public institutions. 66 periodicals were discovered and several useful elements were detailed for their description and documentary analysis (title, type of publication, period, frequency, issues, editor, place of publication, ISSN and a brief explanation of their editorial line. Despite its provisional character, this bibliography shows the great amount and variety of data contained in these periodicals, turning into a relevant resource for studying the martial arts’ history in Spain.

  13. An Investigation Into the Integrity of Fit of Provisional Crowns Using Current Proprietary Temporary Crown Materials.

    Science.gov (United States)

    Taylor, Philip D; Georgakis, Georgios; Niggli, Jason

    2016-06-01

    Three methods of direct provisional crown construction were investigated for accuracy of marginal fit. A modified proprietary crown coping was compared to Bis GMA and isobutyl methacrylate resin provisional crowns with margins modified by using a flowable composite and 'bead on' isobutyl methacrylate respectively. Measurement was at 50x magnification at seven sites over the fit surface. Data was analyzed using SPSS version 13.0.1 and measurement compared using the Mann Whitney test set at a significance level of 0.05. Reliability was checked using the Bland Altman test. Statistical significant differences were found between the three groups. The order of best fit was Bis-GMA and flowable composite > isobutyl methacrylate with 'bead on' margins > Bis-GMA modified implant temporary coping. The clinical significance is that the Bis GMA and flowable composite combination can be used with equal confidence to traditional methods of temporarisation.

  14. The Paediatric Rheumatology International Trials Organisation provisional criteria for the evaluation of response to therapy in juvenile dermatomyositis

    DEFF Research Database (Denmark)

    Ruperto, Nicolino; Pistorio, Angela; Ravelli, Angelo

    2010-01-01

    To develop a provisional definition for the evaluation of response to therapy in juvenile dermatomyositis (DM) based on the Paediatric Rheumatology International Trials Organisation juvenile DM core set of variables....

  15. Comparative in vitro evaluation of CAD/CAM vs conventional provisional crowns.

    Science.gov (United States)

    Abdullah, Adil Othman; Tsitrou, Effrosyni A; Pollington, Sarah

    2016-01-01

    This study compared the marginal gap, internal fit, fracture strength, and mode of fracture of CAD/CAM provisional crowns with that of direct provisional crowns. An upper right first premolar phantom tooth was prepared for full ceramic crown following tooth preparation guidelines. The materials tested were: VITA CAD-Temp®, Polyetheretherketone "PEEK", Telio CAD-Temp, and Protemp™4 (control group). The crowns were divided into four groups (n=10), Group1: VITA CAD-Temp®, Group 2: PEEK, Group 3: Telio CAD-Temp, and Group 4: Protemp™4. Each crown was investigated for marginal and internal fit, fracture strength, and mode of fracture. Statistical analysis was performed using GraphPad Prism software version 6.0. The average marginal gap was: VITA CAD-Temp® 60.61 (±9.99) µm, PEEK 46.75 (±8.26) µm, Telio CAD-Temp 56.10 (±5.65) µm, and Protemp™4 193.07(±35.96) µm (PCAD-Temp® 124.94 (±22.96) µm, PEEK 113.14 (±23.55) µm, Telio CAD-Temp 110.95 (±11.64) µm, and Protemp™4 143.48(±26.74) µm. The average fracture strength was: VITA CAD-Temp® 361.01 (±21.61) N, PEEK 802.23 (±111.29) N, Telio CAD-Temp 719.24 (±95.17) N, and Protemp™4 416.40 (±69.14) N. One-way ANOVA test showed a statistically significant difference for marginal gap, internal gap, and fracture strength between all groups (p0.05). CAD/CAM fabricated provisional crowns demonstrated superior fit and better strength than direct provisional crowns.

  16. Immediate provisional restoration of a single-tooth implant in the esthetic zone: A case report

    OpenAIRE

    Fu, Po-Sung; Wu, Yi-Min; Tsai, Ching-Fang; Huang, Ta-Ko; Chen, Wen-Cheng; Hung, Chun-Cheng; 傅柏松,; 吳逸民,; 蔡菁芳,; 黃大可; 陳文正,; 洪純正,

    2011-01-01

    Immediate implant restoration of single implants may demonstrate a positive effect on peri-implant soft tissue. Placement of a provisional restoration following implant surgery can create soft tissue contours that resemble normal gingival topography before placement of the definitive prosthesis. This article describes a staged approach of the mandibular permanent right central incisor, which was congenital missing. The proper space for restoration of the missing incisor was created through or...

  17. Biomechanical impact of provisional stenting and balloon dilatation on coronary bifurcation: clinical implications.

    Science.gov (United States)

    Chen, Henry Y; Al-Saadon, Khalid; Louvard, Yves; Kassab, Ghassan S

    2017-07-01

    In-stent restenosis (ISR) and stent thrombosis remain clinically significant problems for bifurcations. Although the role of wall shear stress (WSS) has been well investigated, the role of circumferential wall stresses (CWS) has not been well studied in provisional stenting with and without final kissing balloon (FKB). We hypothesized that the perturbation of CWS at the SB in provisional stenting and balloon dilatation is an important factor in addition to WSS, and, hence, may affect restenosis rates (i.e., higher CWS correlates with higher restenosis). To test this hypothesis, we developed computational models of stent, FKB at bifurcation, and finite element simulations that considered both fluid and solid mechanics of the vessel wall. We computed the stress ratio (CWS/WSS) to show potential correlation with restenosis in clinical studies (i.e., higher stress ratio correlates with higher restenosis). Our simulation results show that stenting in the main branch (MB) increases the maximum CWS in the side branch (SB) and, hence, yields a higher stress ratio in the SB, as compared with the MB. FKB dilatation decreases the CWS and increases WSS, which collectively lowers the stress ratio in the SB. The changes of stress ratio were correlated positively with clinical data in provisional stenting and FKB. Both fluid and solid mechanics need to be evaluated when considering various stenting techniques at bifurcations, as solid stresses also play an important role in clinical outcome. An integrative index of bifurcation mechanics is the stress ratio that considers both CWS and WSS.NEW & NOTEWORTHY Although the role of wall shear stress (WSS) has been well investigated, the role of circumferential wall stresses (CWS) has not been well studied in provisional stenting with and without final kissing balloon. Both fluid and solid mechanics need to be evaluated when considering various stenting techniques at bifurcations. An integrative index of bifurcation mechanics is the

  18. Provisional in-silico biopharmaceutics classification (BCS) to guide oral drug product development

    OpenAIRE

    Wolk O; Agbaria R; Dahan A

    2014-01-01

    Omri Wolk, Riad Agbaria, Arik Dahan Department of Clinical Pharmacology, School of Pharmacy, Faculty of Health Sciences, Ben-Gurion University of the Negev, Beer-Sheva, Israel Abstract: The main objective of this work was to investigate in-silico predictions of physicochemical properties, in order to guide oral drug development by provisional biopharmaceutics classification system (BCS). Four in-silico methods were used to estimate LogP: group contribution (CLogP) using two different softwa...

  19. Examining the provisional guidelines for weight gain in twin pregnancies: a retrospective cohort study

    OpenAIRE

    Lutsiv, Olha; Hulman, Adam; Woolcott, Christy; Beyene, Joseph; Giglia, Lucy; Armson, B. Anthony; Dodds, Linda; Neupane, Binod; McDonald, Sarah D

    2017-01-01

    Background Weight gain during pregnancy has an important impact on maternal and neonatal health. Unlike the Institute of Medicine (IOM) recommendations for weight gain in singleton pregnancies, those for twin gestations are termed “provisional”, as they are based on limited data. The objectives of this study were to determine the neonatal and maternal outcomes associated with gaining weight below, within and above the IOM provisional guidelines on gestational weight gain in twin pregnancies, ...

  20. The American Volunteer Soldier: Will He Fight. (A Provisional Attitudinal Analysis)

    Science.gov (United States)

    1975-06-02

    NUMBER 4. TITLE (end Subtitlm) THE AMERICAN VOLUNTEER SOLDIER: WILL HE FIGHT? (A PROVISIONAL ATTITUDINAL ANALYSIS) 5. TYPE OF REPORT A PERIOD... Psychologycal Solutions to Social Problems; An Introduction to Social Technology. New York: Academic Press, 1971. Walton, George, COL, USA (Ret...QUESTIONNAIRE. There are several types of questions in this questionnaire. EXAMPLES of the types you will encounter are listed below: FILL IN: [EXAMPLE

  1. Influence of immediate loading on provisional restoration in dental implant stability

    Science.gov (United States)

    Ikbal, M.; Odang, R. W.; Indrasari, M.; Dewi, R. S.

    2017-08-01

    The success of dental implant treatment is determined by the primary stability at placement. One factor that could influence this stability is occlusal loading through provisional restoration. Two types of loading protocols are usually used: immediate and delayed loading. However, some controversies remain about the influence of occlusal loading on implant stability. Therefore, the influence of immediate loading on implant stability must be studied. An animal study was conducted by placing nine dental implants in the mandibular jaw of three Macaca fascicularis. Provisional restorations with various occlusal contacts (no, light, and normal contact) were placed on the implant. The implant stability was measured using the Ostell ISQ three times: immediately (baseline) and at the first and second months after implant placement. The implant stability between implants with no and normal occlusal contact as well as light and normal occlusal contact showed significant differences (p implant placement. However, no significant increase (p > 0.05) in implant stability was seen at the baseline and the first and second months after implant placement for all occlusal contact groups. Immediate loading influenced the implant stability, and provisional restoration of implant without occlusal contact showed the highest implant stability.

  2. [Consensus Statement by GeSIDA/National AIDS Plan Secretariat on antiretroviral treatment in adults infected by the human immunodeficiency virus (Updated January 2013)].

    Science.gov (United States)

    2013-11-01

    This consensus document is an update of combined antiretroviral therapy (cART) guidelines for HIV-1 infected adult patients. To formulate these recommendations a panel composed of members of the GeSIDA/National AIDS Plan Secretariat (Grupo de Estudio de Sida and the Secretaría del Plan Nacional sobre el Sida) reviewed the efficacy and safety advances in clinical trials, cohort and pharmacokinetic studies published in medical journals (PubMed and Embase) or presented in medical scientific meetings. The strength of the recommendations and the evidence which support them are based on a modification of the criteria of Infectious Diseases Society of America. cART is recommended in patients with symptoms of HIV infection, in pregnant women, in serodiscordant couples with high risk of transmission, in hepatitisB co-infection requiring treatment, and in HIV nephropathy. cART is recommended in asymptomatic patients if CD4 is 500cells/μl cART should be considered in the case of chronic hepatitisC, cirrhosis, high cardiovascular risk, plasma viral load >100.000 copies/ml, proportion of CD4 cells 55years. The objective of cART is to achieve an undetectable viral load. The first cART should include 2 reverse transcriptase inhibitors (RTI) nucleoside analogs and a third drug (a non-analog RTI, a ritonavir boosted protease inhibitor, or an integrase inhibitor). The panel has consensually selected some drug combinations, for the first cART and specific criteria for cART in acute HIV infection, in tuberculosis and other HIV related opportunistic infections, for the women and in pregnancy, in hepatitisB or C co-infection, in HIV-2 infection, and in post-exposure prophylaxis. These new guidelines update previous recommendations related to first cART (when to begin and what drugs should be used), how to monitor, and what to do in case of viral failure or adverse drug reactions. cART specific criteria in comorbid patients and special situations are similarly updated. Copyright

  3. Health technologies for the improvement of chronic disease management: a review of the Medical Advisory Secretariat evidence-based analyses between 2006 and 2011.

    Science.gov (United States)

    Nikitovic, M; Brener, S

    2013-01-01

    As part of ongoing efforts to improve the Ontario health care system, a mega-analysis examining the optimization of chronic disease management in the community was conducted by Evidence Development and Standards, Health Quality Ontario (previously known as the Medical Advisory Secretariat [MAS]). The purpose of this report was to identify health technologies previously evaluated by MAS that may be leveraged in efforts to optimize chronic disease management in the community. The Ontario Health Technology Assessment Series and field evaluations conducted by MAS and its partners between January 1, 2006, and December 31, 2011. Technologies related to at least 1 of 7 disease areas of interest (type 2 diabetes, coronary artery disease, atrial fibrillation, chronic obstructive pulmonary disease, congestive heart failure, stroke, and chronic wounds) or that may greatly impact health services utilization were reviewed. Only technologies with a moderate to high quality of evidence and associated with a clinically or statistically significant improvement in disease management were included. Technologies related to other topics in the mega-analysis on chronic disease management were excluded. Evidence-based analyses were reviewed, and outcomes of interest were extracted. Outcomes of interest included hospital utilization, mortality, health-related quality of life, disease-specific measures, and economic analysis measures. Eleven analyses were included and summarized. Technologies fell into 3 categories: those with evidence for the cure of chronic disease, those with evidence for the prevention of chronic disease, and those with evidence for the management of chronic disease. The impact on patient outcomes and hospitalization rates of new health technologies in chronic disease management is often overlooked. This analysis demonstrates that health technologies can reduce the burden of illness; improve patient outcomes; reduce resource utilization intensity; be cost

  4. Technical Training: C++ for Particle Physicists

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Please note that Paul Kunz will be giving his very popular and highly recommended C++ course again on 8 - 12 March. The course costs 200 CHF, and advance registration is required. People with CERN EDH accounts can apply electronically directly from the Web course description page : http://cern.ch/TechnicalTraining/ENSTEC/p2002/Software/cpppp_e.asp Team Visitors should ask their Group Leader to send an e-mail to the DTO of PH Department, M. Burri, referring to the ‘C++ for Particle Physicists' ...

  5. Technical Training: C++ for Particle Physicists

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Please note that Paul Kunz will be giving his very popular and highly recommended C++ course again on 8 - 12 March. The course costs 200 CHF, and advance registration is required. People with CERN EDH accounts can apply electronically directly from the Web course description page: http://cern.ch/TechnicalTraining/ENSTEC/p2002/Software/cpppp_e.asp Team Visitors should ask their Group Leader to send an e-mail to the DTO of PH Department, M. Burri, referring to the ‘C++ for Particle Physicists' c...

  6. Comparison of the color stability of provisional restorative materials after storing in different drinks

    Directory of Open Access Journals (Sweden)

    Merve Bankoğlu Güngör

    2016-05-01

    Full Text Available OBJECTIVE: The objective of the present study was to compare the color stability of provisional restorative materials after stroring in different drinks. MATERIALS AND METHOD: Thirty specimens (10 mm in diameter and 2 mm in thickness were prepared from three different materials (Temdent, TRIAD ve TelioCAD. Specimens were divided into six groups according to drinks (distilled water, coffee, tea, cola, red wine and fruit juice; n=5. Specimens were stored in these drinks at 37 °C for 48 hours. The L*, a*, b* values of the specimens were measured with a spectrophometer and recorded before and after storing in drinks. Then ΔE* values were calculated. The data were statistically analyzed using two-way analysis of variance (ANOVA and Tukey’s HSD post hoc tests (α=0.05. RESULTS: Difference between the ΔE* values of specimens stored in different drinks was statistically significant (p<0.05. Color change of TelioCAD specimens was smallest in cola drink and greatest in red wine. Color change of Temdent specimens was smallest in fruit juice and greatest in coffee. For TRIAD specimens, greater color change was observed in coffee, red wine, and tea, in descending order. When the results of storing in the same drink were compared, TRIAD showed the greatest values of color change in coffee and red wine in comparison to the other provisional materials (p<0.05. CONCLUSION: Color stability changed according to the type of the provisional material and the drink. When the drinks were evaluated, greater color changes were observed in coffee, and when the materials were evaluated greater color changes were observed in TRIAD.

  7. Use of intraoral welding to stabilize dental implants in augmented sites for immediate provisionalization: a case report.

    Science.gov (United States)

    Avvanzo, Pierluigi; Fabrocini, Lelio A; Ciavarella, Domenico; Avvanzo, Andrea; Lo Muzio, Lorenzo; De Maio, Raffaele A

    2012-02-01

    Immediate implant rehabilitation of edentulous arches may be somewhat problematic because of anatomic situations involving insufficient bone thickness or height and tooth position. The aim of this report was to present a retrospective case series of dental implants placed into augmented sites (split crest or sinus augmentation) that were stabilized with an intraorally welded framework at the time of immediate provisionalization. An intraoral welding unit was used to join and stabilize implants as an orthopedic splint to break down forces applied on provisional restorations during healing and osseointegration. This approach allows for the immediate provisionalization of implants in bone-defective areas where multiple implant systems have been enacted. Forty-eight implants in 16 patients were inserted, welded together to a titanium framework, and immediately provisionalized during the same surgery in which split-crest or sinus augmentation procedures were performed. After removing the welded frameworks, 1 of 48 implants failed; the failed implant was associated with a sinus augmentation procedure. Intraoral welding stabilization may be a predictable procedure to allow immediate loading in augmented areas during healing time and to stabilize implants against nonaxial forces, thereby reducing the number of surgical and prosthetic sessions and making patients comfortable and accustomed to immediate fixed provisional and definitive restorations.

  8. Effect of different provisional cement remnant cleaning procedures including Er:YAG laser on shear bond strength of ceramics.

    Science.gov (United States)

    Zortuk, Mustafa; Gumus, Hasan Onder; Kilinc, Halil Ibrahim; Tuncdemir, Ali Riza

    2012-11-01

    The purpose of this study was to evaluate the effect of provisional cement removal by different dentin cleaning protocols (dental explorer, pumice, cleaning bur, Er:YAG laser) on the shear bond strength between ceramic and dentin. In total, 36 caries-free unrestored human third molars were selected as tooth specimens. Provisional restorations were fabricated and cemented with eugenol-free provisional cement. Then, disc-shaped ceramic specimens were fabricated and randomly assigned to four groups of dentin cleaning protocols (n = 9). Group 1 (control): Provisional cements were mechanically removed with a dental explorer. Group 2: The dentin surfaces were treated with a cleaning brush with pumice Group 3: The dentin surfaces were treated with a cleaning bur. Group 4: The provisional cements were removed by an Er:YAG laser. Self-adhesive luting cement was used to bond ceramic discs to dentin surfaces. Shear bond strength (SBS) was measured using a universal testing machine at a 0.05 mm/min crosshead speed. The data were analyzed using a Kolmogorov Smirnov, One-way ANOVA and Tukey HSD tests to perform multiple comparisons (α=0.05). THE DENTIN CLEANING METHODS DID NOT SIGNIFICANTLY AFFECT THE SBS OF CERAMIC DISCS TO DENTIN AS FOLLOWS: dental explorer, pumice, cleaning bur, and Er:YAG laser. The use of different cleaning protocols did not affect the SBS between dentin and ceramic surfaces.

  9. Effect of different provisional cement remnant cleaning procedures including Er:YAG laser on shear bond strength of ceramics

    Science.gov (United States)

    Zortuk, Mustafa; Gumus, Hasan Onder; Kilinc, Halil Ibrahim

    2012-01-01

    PURPOSE The purpose of this study was to evaluate the effect of provisional cement removal by different dentin cleaning protocols (dental explorer, pumice, cleaning bur, Er:YAG laser) on the shear bond strength between ceramic and dentin. MATERIALS AND METHODS In total, 36 caries-free unrestored human third molars were selected as tooth specimens. Provisional restorations were fabricated and cemented with eugenol-free provisional cement. Then, disc-shaped ceramic specimens were fabricated and randomly assigned to four groups of dentin cleaning protocols (n = 9). Group 1 (control): Provisional cements were mechanically removed with a dental explorer. Group 2: The dentin surfaces were treated with a cleaning brush with pumice Group 3: The dentin surfaces were treated with a cleaning bur. Group 4: The provisional cements were removed by an Er:YAG laser. Self-adhesive luting cement was used to bond ceramic discs to dentin surfaces. Shear bond strength (SBS) was measured using a universal testing machine at a 0.05 mm/min crosshead speed. The data were analyzed using a Kolmogorov Smirnov, One-way ANOVA and Tukey HSD tests to perform multiple comparisons (α=0.05). RESULTS The dentin cleaning methods did not significantly affect the SBS of ceramic discs to dentin as follows: dental explorer, pumice, cleaning bur, and Er:YAG laser. CONCLUSION The use of different cleaning protocols did not affect the SBS between dentin and ceramic surfaces. PMID:23236570

  10. Immediate implant placement and provisionalization with simultaneous guided bone regeneration in the esthetic zone

    Directory of Open Access Journals (Sweden)

    Chih-Long Chen

    2011-03-01

    Full Text Available The procedure for immediate implant placement and provisionalization is time-saving, possibly with only one surgical intervention required, although allowing maximal preservation of peri-implant tissues. In this case, we extracted a fractured maxillary right central incisor of a 46-year-old woman with high esthetic expectations, and a transmucosal implant was immediately installed. Simultaneous guided bone regeneration was performed to correct the defects at the facial side of the socket and augment the alveolar ridge horizontally. Primary stability of the implant body and wound closure without tension were confirmed. Connection of a 15° angled abutment and fabrication of a provisional acrylic resin crown without occlusal contact were also completed in the same appointment. After intensive follow-up and soft-tissue molding for 6 months, the customized zirconia abutment and all-ceramic crown were definitively fabricated. During the 18-month follow-up period, the patient was satisfied with the esthetic and functional results.

  11. Finite element analysis of provisional structures of implant-supported complete prostheses.

    Science.gov (United States)

    Carneiro, Bruno Albuquerque; de Brito, Rui Barbosa; França, Fabiana Mantovani Gomes

    2014-04-01

    The use of provisional resin implant-supported complete dentures is a fast and safe procedure to restore mastication and esthetics of patients soon after surgery and during the adaptation phase to the new denture. This study assessed stress distribution of provisional implant-supported fixed dentures and the all-on-4 concept using self-curing acrylic resin (Tempron) and bis-acrylic resin (Luxatemp) to simulate functional loads through the three-dimensional finite element method. Solidworks software was used to build three-dimensional models using acrylic resin (Tempron, model A) and bis-acrylic resin (Luxatemp, model B) for denture captions. Two loading patterns were applied on each model: (1) right unilateral axial loading of 150 N on the occlusal surfaces of posterior teeth and (2) oblique loading vector of 150 N at 45°. The results showed that higher stress was found on the bone crest below oblique load application with a maximum value of 187.57 MPa on model A and 167.45 MPa on model B. It was concluded that model B improved stress distribution on the denture compared with model A.

  12. The use of transitional implants to support provisional prostheses during the healing phase: a literature review.

    Science.gov (United States)

    de Almeida, Erika Oliveira; Filho, Homberto Gennari; Goiatto, Marcelo Coelho

    2011-01-01

    transitional implants are indicated for cases in which immediate loading is counterindicated because a healing period is necessary for osseointegration of the definitive implants. These provisional implants were developed to support an implant-supported fixed prosthesis or overdenture to provide retention, stability, and support. The aim of this article was to conduct a literature review on transitional implants to highlight the characteristics of the transitional implants and their advantages, indications, and contraindications, including the level of osseointegration of such implants according to the functional period. the present literature review was based on the Old Medline and Medline databases from 1999 to 2010 using the key words "transitional implants" and "temporary implants." Fourteen articles were found: 11 clinical studies or techniques and three histologic and histomorphometric studies. the transitional immediate prostheses were worn by completely and partially edentulous patients. Advantages of transitional implants include complete denture retention, stability, and support; maintenance of chewing, phonetics, and patient comfort; protection of bone grafts; vertical stop during healing period; easy and fast surgical and prosthetic procedures; lower cost in comparison to the definitive implant; and reestablishment of esthetics. The success of transitional implants as conservative treatment for conventional immediate loading is a reality if correctly indicated. transitional implants are a provisional treatment alternative for completely and partially edentulous patients. However, additional studies are required to evaluate the level of remodeling and repair of the transitional implants under loading.

  13. Evaluation of surface physical properties of acrylic resins for provisional prosthesis

    Directory of Open Access Journals (Sweden)

    Sérgio Paulo Hilgenberg

    2008-09-01

    Full Text Available Acrylic resins used for provisional prostheses should have satisfactory superficial characteristics in order to ensure gingival health and low bacterial attachment. The purpose of the present study was to evaluate the superficial roughness and contact angle after two types of polishing and the Vickers hardness of three acrylic resins (Duralay - G1, Dencrilay - G2, and Dencor - G3, all shade 66, indicated for provisional fixed prostheses. Five 20 x 3 ± 1 mm diameter discoid specimens were obtained for each group. One side of the specimens was subjected to standard polishing (pumice and whiting slurry, and the opposite side was polished with special tips. The mean roughness and contact angles of the materials were measured. The specimens were subjected to the Vickers microhardness test, which indicated that standard polishing produced a surface roughness equivalent to that of the special tips. The contact angles obtained with the standard polishing were equivalent to those observed in the special tips group. The microhardness of G1 and G3 resins showed statistical differences.

  14. Comparative evaluation of marginal leakage of provisional crowns cemented with different temporary luting cements: In vitro study

    Science.gov (United States)

    Arora, Sheen Juneja; Arora, Aman; Upadhyaya, Viram; Jain, Shilpi

    2016-01-01

    Background or Statement of Problem: As, the longevity of provisional restorations is related to, a perfect adaptation and a strong, long-term union between restoration and teeth structures, therefore, evaluation of marginal leakage of provisional restorative materials luted with cements using the standardized procedures is essential. Aims and Objectives: To compare the marginal leakage of the provisional crowns fabricated from Autopolymerizing acrylic resin crowns and bisphenol A-glycidyl dimethacrylate (BIS-GMA) resin crowns. To compare the marginal leakage of the provisional crowns fabricated from autopolymerizing acrylic resin crowns and BIS-GMA resin crowns cemented with different temporary luting cements. To compare the marginal leakage of the provisional crowns fabricated from autopolymerizing acrylic resin (SC-10) crowns cemented with different temporary luting cements. To compare the marginal leakage of the provisional crowns fabricated from BIS-GMA resin crowns (Protemp 4) cemented with different temporary luting cements. Methodology: Freshly extracted 60 maxillary premolars of approximately similar dimensions were mounted in dental plaster. Tooth reduction with shoulder margin was planned to use a customized handpiece-holding jig. Provisional crowns were prepared using the wax pattern fabricated from computer aided designing/computer aided manufacturing milling machine following the tooth preparation. Sixty provisional crowns were made, thirty each of SC-10 and Protemp 4 and were then cemented with three different luting cements. Specimens were thermocycled, submerged in a 2% methylene blue solution, then sectioned and observed under a stereomicroscope for the evaluation of marginal microleakage. A five-level scale was used to score dye penetration in the tooth/cement interface and the results of this study was analyzed using the Chi-square test, Mann–Whitney U-test, Kruskal–Wallis H-test and the results were statistically significant P crowns

  15. A technique for indirect fabrication of a complete-arch, implant-supported, fixed provisional restoration from a radiographic template.

    Science.gov (United States)

    Spyropoulou, Panagiota-Eirini; Razzoog, Michael; Sierraalta, Marianella

    2010-09-01

    This article describes an alternative technique for the fabrication of a complete-arch, implant-supported, cement-retained, fixed provisional restoration. The definitive cast is fabricated from the surgical guide and the provisional restoration is fabricated indirectly from the radiographic guide. This technique is an easy and time-saving procedure to fabricate an interim prosthesis for immediate or delayed loading of implants. Copyright © 2010 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

  16. Technical Network

    CERN Multimedia

    2007-01-01

    In order to optimise the management of the Technical Network (TN), to facilitate understanding of the purpose of devices connected to the TN and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive e-mails from IT/CS asking them to add the corresponding information in the network database at "network-cern-ch". Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

  17. Technical Network

    CERN Multimedia

    2007-01-01

    In order to optimize the management of the Technical Network (TN), to ease the understanding and purpose of devices connected to the TN, and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive email notifications from IT/CS asking them to add the corresponding information in the network database. Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

  18. Imagining Technicities

    DEFF Research Database (Denmark)

    Liboriussen, Bjarke; Plesner, Ursula

    2011-01-01

    to the elements of taste and skill. In the final analysis those references were synthesized as five imagined technicities: the architect, the engineer, the client, the Chinese, and the Virtual World native. Because technicities are often assumed and rarely discussed as actants who influence practice, their role......, this article focuses on innovative uses of virtual worlds in architecture. We interviewed architects, industrial designers and other practitioners. Conceptually supported by an understanding of technicity found in Cultural Studies, the interviews were then coded with a focus on interviewees’ references...

  19. 78 FR 3883 - The Bon-Ton Stores, Inc., Provisional Acceptance of a Settlement Agreement and Order

    Science.gov (United States)

    2013-01-17

    ... drawstrings (Garments) to consumers. The Garments were sold at retail stores in the United States for between... COMMISSION The Bon-Ton Stores, Inc., Provisional Acceptance of a Settlement Agreement and Order AGENCY... Agreement with The Bon-Ton Stores, Inc., containing a civil penalty of $450,000.00, within twenty (20) days...

  20. Innovative approach to computer-guided surgery and fixed provisionalization assisted by screw-retained transitional implants.

    Science.gov (United States)

    Gallucci, German O; Finelle, Gary; Papadimitriou, Dimitrios E V; Lee, Sang J

    2015-01-01

    The objectives of this case series are to describe a novel clinical approach to treat completely edentulous patients and determine its viability. Computer-guided implant planning was used to create a screw-retained surgical template (ST) supported by transitional implants and a fixed screw-retained provisional prosthesis supported by the transitional implants at the time of definitive implant placement. Five patients with at least one edentulous arch were treated. After the diagnostic tooth setup was performed, a duplicate with radiopaque acrylic resin was fabricated to serve as a surgical template (ST) for the placement of screw-form transitional implants and a radiographic guide (RG). Four transitional implants were strategically placed through the guide where they would not interfere with the future definitive implants. The transitional implants were used to support the RG during computed tomographic scanning. Subsequently, the RG was converted into a second ST based on three-dimensional virtual planning. Eight implants were placed by the computer-guided system, and an immediate prefabricated fixed provisional was connected to the transitional implants. All the implants included in the study achieved primary stability and osseointegrated successfully. For 4 months, the transitional implants served successfully as abutments for the provisional prosthesis. This innovative clinical approach overcomes the limitations of a mucosa/bone-supported ST by offering fixed, reproducible support for the RG and ST by means of transitional implants. The delivery of a prefabricated screw-retained provisional on transitional implants allows for passive healing and minimum chairside adjustments.

  1. 76 FR 77981 - Build-A-Bear Workshop, Inc., Provisional Acceptance of a Settlement Agreement and Order

    Science.gov (United States)

    2011-12-15

    ... COMMISSION Build-A-Bear Workshop, Inc., Provisional Acceptance of a Settlement Agreement and Order AGENCY... Agreement with Build-A-Bear Workshop, Inc., containing a civil penalty of $600,000.00. DATES: Any interested... Agreement 1. In accordance with 16 CFR 1118.20, Build-A-Bear Workshop, Inc. (``Build-A-Bear'') and staff of...

  2. Immediate loading versus immediate provisionalization of maxillary single-tooth replacements: a prospective randomized study with BioComp implants

    NARCIS (Netherlands)

    Lindeboom, Jerome A.; Frenken, Joost W.; Dubois, Leander; Frank, Michael; Abbink, Ingmar; Kroon, Frans H.

    2006-01-01

    PURPOSE: The aim of this prospective randomized study was to evaluate the clinical outcome of immediately loaded solid plasma sprayed (TPS) BioComp (BioComp Industries BV, Vught, The Netherlands) implants versus immediate provisionalized but non-loaded BioComp implants in the anterior and premolar

  3. Investigation on the hematopoietic effect of functional foods using radiation and preparing the provisional product

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sung Ho; Oh, Heon; Lee, Song Eun; Jeong, Yong Woon [Chonnam National University, Kwangju (Korea)

    1999-04-01

    We performed this study to determine the effect of several oriental prescriptions as energy tonic (Chinese medical concept: Bu-Qi) or blood building (Chinese medical concept: Bu-Xie) decoction and its major ingredients on jejunal crypt survival, endogenous spleen colony formation, and apoptosis in jejunal crypt cells of mice irradiated with high and low dose of gamma-irradiation. For the study of evaluation on the biological stability of irradiated chinese medical prescriptions, we performed the experiment to determine the effect of irradiated (10kGy) or unirradiated Si-Wu-Tang, Bu-Zhong-Yi-Qi-Tang and San-Ling-Bai-Shu-San in irradiated mice. Further studies are needed to characterize better the protective nature of the total extract and its ingredients and for preparing the provisional product. (author). 61 refs., 3 figs., 21 tabs.

  4. Retentive force of O-ring attachment to use Immediate Provisional Implant (IPI)-retained overdenture.

    Science.gov (United States)

    Kobayashi, Mariko; Ohkubo, Chikahiro; Suzuki, Yasunori; Aoki, Takayuki; Sato, Jun-ichi; Hosoi, Toshio

    2005-12-01

    This study evaluated the retentive force of the O-ring attachment to an Immediate Provisional Implant (IPI)-retained overdenture. Two sizes of O-rings (#1, #2) were placed on the IPI abutment head. As the controls, soft relining material, silicone lining material, and the PMMA resin were used to connect the IPI abutment head. The retentive forces (n=5, N) obtained at a crosshead speed of 40 mm/min were analyzed by ANOVA/Tukey's HSD test (alpha=0.05). O-ring #1 showed the significantly greatest force among all materials tested (p0.05). Appropriate retention was obtained using the smaller O-ring#1 for the IPI-retained overdenture.

  5. Upper lower Cambrian (provisional Cambrian Series 2 trilobites from northwestern Gansu Province, China

    Directory of Open Access Journals (Sweden)

    Jan Bergström†

    2014-08-01

    Full Text Available Upper lower Cambrian (provisional Cambrian Series 2 trilobites are described from three sections through the Shuangyingshan Formation in the Beishan area, northwestern Gansu Province, China. The trilobite fauna is dominated by eodiscoid and corynexochid trilobites, together representing at least ten genera: Serrodiscus, Tannudiscus, Calodiscus, Pagetides, Kootenia, Edelsteinaspis, Ptarmiganoides?, Politinella, Dinesus and Subeia. Eleven species are described, of which seven are identified with previously described taxa and four described under open nomenclature. The composition of the fauna suggests biogeographic affinity with Siberian rather than Gondwanan trilobite faunas, and the Cambrian Series 2 faunas described herein and from elsewhere in northwestern China seem to be indicative of the marginal areas of the Siberian palaeocontinent. This suggests that the Middle Tianshan–Beishan Terrane may have been located fairly close to Siberia during middle–late Cambrian Epoch 2.

  6. Pre-surgical Provisional Prosthesis for Immediate Non-occlusal-loaded Flapless Implant.

    Science.gov (United States)

    Inbarajan, Athiban; Banu, Fathima; Tv, Padmanabhan; Kumar, Anand; Seenivasan, Madhan

    2017-06-13

    A 49-year-old patient reported for immediate replacement of missing maxillary anterior teeth with implant-retained prosthesis. Elevation of flap alters the mucosal level, causes discomfort, and delays the restorative procedure. To maintain the esthetics, flapless surgery was planned. Since placement of an implant is pre-planned in a predetermined site, fabrication of the prostheses before commencement of the surgery, especially when replacing the teeth in the anterior region, could be a viable option. This case report explains the method of fabrication of the provisional restoration for flapless surgery in the presurgical phase. The technique would avoid any micromotion and implant instability caused due to abutment preparation and impression procedure postsurgically.

  7. Emergency department external fixation for provisional treatment of pilon and unstable ankle fractures

    Directory of Open Access Journals (Sweden)

    Craig R Lareau

    2015-01-01

    Full Text Available Unstable ankle fractures and impacted tibial pilon fractures often benefit from provisional external fixation as a temporizing measure prior to definitive fixation. Benefits of external fixation include improved articular alignment, decreased articular impaction, and soft tissue rest. Uniplanar external fixator placement in the Emergency Department (ED ex-fix is a reliable and safe technique for achieving ankle reduction and stability while awaiting definitive fixation. This procedure involves placing transverse proximal tibial and calcaneal traction pins and connecting the pins with two external fixator rods. This technique is particularly useful in austere environments or when the operating room is not immediately available. Additionally, this bedside intervention prevents the patient from requiring general anesthesia and may be a cost-effective strategy for decreasing valuable operating time. The ED ex-fix is an especially valuable procedure in busy trauma centers and during mass casualty events, in which resources may be limited.

  8. Pre-prosthetic minor tooth movement with elastic separating ring & provisional restoration modification: case report

    Directory of Open Access Journals (Sweden)

    Haneol Shin

    2012-05-01

    Full Text Available Proximal caries or coronal defect in posterior teeth may result in the loss of proximal space and drifting of neighboring teeth, which makes restoration difficult. Inability to restore proper contours and to align tooth axis properly are commonly encountered problems when planning tooth restoration. Moreover, tilted teeth aggravate periodontal tissue breakdown, such as pseudo-pocket, and angular osseous defect. The purpose of this case presentation is to describe a simple technique for inducing minor tooth movement with orthodontic separating ring and provisional restoration modification. This method was used to create crown placement space on mesially tilted molar. This method is easy, simple and efficient technique which could be used in interproximal space gaining in selected situation.

  9. Workplace exposure to nanoparticles and the application of provisional nanoreference values in times of uncertain risks

    Science.gov (United States)

    van Broekhuizen, Pieter; van Broekhuizen, Fleur; Cornelissen, Ralf; Reijnders, Lucas

    2012-03-01

    Nano reference values (NRVs) for occupational use of nanomaterials were tested as provisional substitute for Occupational Exposure Limits (OELs). NRVs can be used as provisional limit values until Health-Based OELs or derived no-effect levels (DNEL) become available. NRVs were defined for 8 h periods (time weighted average) and for short-term exposure periods (15 min-time weighted average). To assess the usefulness of these NRVs, airborne number concentrations of nanoparticles (NPs) in the workplace environment were measured during paint manufacturing, electroplating, light equipment manufacturing, non-reflective glass production, production of pigment concentrates and car refinishing. Activities monitored were handling of solid engineered NPs (ENP), abrasion, spraying and heating during occupational use of nanomaterials (containing ENPs) and machining nanosurfaces. The measured concentrations are often presumed to contain ENPs as well as process-generated NPs (PGNP). The PGNP are found to be a significant source for potential exposure and cannot be ignored in risk assessment. Levels of NPs identified in workplace air were up to several millions of nanoparticles/cm3. Conventional components in paint manufacturing like CaCO3 and talc may contain a substantial amount of nanosized particulates giving rise to airborne nanoparticle concentrations. It is argued that risk assessments carried out for e.g. paint manufacturing processes using conventional non-nano components should take into account potential nanoparticle emissions as well. The concentrations measured were compared with particle-based NRVs and with mass-based values that have also been proposed for workers protection. It is concluded that NRVs can be used for risk management for handling or processing of nanomaterials at workplaces provided that the scope of NRVs is not limited to ENPs only, but extended to the exposure to process-generated NPs as well.

  10. Analysis of colour stability of selected provisional prosthetic materials: an in vitro study.

    Science.gov (United States)

    Koczorowski, Ryszard; Linkowska-Swidzińska, Kamila; Gedrange, Tomasz; Swidziński, Teodor

    2009-08-01

    Prosthetic restorative materials (that are) used for temporary fixed dentures tend to exhibit variable discolouration over several weeks of use. The aim of this study was to perform a spectrophotometric analysis of the influence of selected discolouring factors on the colour stability of provisional prosthetic materials in vitro. In the study, the following prosthetic materials for short-term use in the oral cavity were evaluated: Luxatemp, Structur 2S.C., Protemp II, Zhermacryl STC and Dentalon Plus. Samples of these materials were immersed in coffee, tea and dark fruit juice for 60 h at different pH values. Colour was evaluated by determining the monochromatic coefficients of light reflected by the samples, using a spectrophotometric method. Results received in artificial light (illuminant A) were compared with those obtained in daylight (illuminant D65). Changes in colour and its parameters according to the CIE L*a*b* system were analysed. The analysis (of the colour and colour parameters) of the tested materials in two types of light showed that Structur displayed the greatest tendency to discolouration and that the least tendency to discolouration was exhibited by Dentalon Plus. The fact that colour parameters obtained in two types of light were not identical suggests that changes in the colour of the same material may be perceived differently, depending on the illuminant. Provisional prosthetic materials show variable colour stability under different conditions in the oral cavity. The colour of prosthetic materials may be perceived differently, depending on the illuminant and the effect of the environment in which they are used.

  11. In Vitro Fit and Cementation Resistance of Provisional Crowns for Single Implant-Supported Restorations.

    Science.gov (United States)

    Moris, Izabela Cristina Maurício; Oliveira, Juliana Elias de; Faria, Adriana Cláudia Lapria; Ribeiro, Ricardo Faria; Rodrigues, Renata Cristina Silveira

    2015-10-01

    This study aimed to verify marginal fit and the effect of cement film thickness standardization on retention of provisional crowns made with prefabricated acrylic cylinders on abutments, using two temporary luting agents subjected or not to mechanical cycling. Provisional crowns were made from bis-acryl (Luxatemp Fluorescence) or methyl methacrylate (Duralay) resins on acrylic cylinders and marginal fit and cement film thickness were evaluated. For retention evaluation, crowns were cemented with two temporary luting agents: non-eugenol zinc oxide (Tempbond NE) or calcium hydroxide-based (Hydcal) cements and subjected to tensile strength in a universal testing machine. After cleaning, debonded crowns were cemented again, subjected to mechanical cycling and retention was reassessed. The results of marginal fit and cement film thickness were analyzed by Student's t-test while retention of cements before and after mechanical cycling was analyzed using a mixed linear model. Methyl methacrylate crowns presented greater marginal misfit (p=0.001) and occlusal cement film thickness (p=0.003) than the bis-acryl ones. No difference was observed at axial cement film thickness (p=0.606). Resins (p=0.281) did not affect crown retention, but luting agents (p=0.029) and mechanical cycling (p=0.027) showed significant effects. The only significant interaction was mechanical cycling*luting agents, which means that luting agents were differently affected by mechanical cycling (p=0.002). In conclusion, the results showed that bis-acryl resin associated to calcium-hydroxide luting agent provided the best retention and lower cement thickness.

  12. Agitation in cognitive disorders: International Psychogeriatric Association provisional consensus clinical and research definition.

    Science.gov (United States)

    Cummings, Jeffrey; Mintzer, Jacobo; Brodaty, Henry; Sano, Mary; Banerjee, Sube; Devanand, D P; Gauthier, Serge; Howard, Robert; Lanctôt, Krista; Lyketsos, Constantine G; Peskind, Elaine; Porsteinsson, Anton P; Reich, Edgardo; Sampaio, Cristina; Steffens, David; Wortmann, Marc; Zhong, Kate

    2015-01-01

    Agitation is common across neuropsychiatric disorders and contributes to disability, institutionalization, and diminished quality of life for patients and their caregivers. There is no consensus definition of agitation and no widespread agreement on what elements should be included in the syndrome. The International Psychogeriatric Association formed an Agitation Definition Work Group (ADWG) to develop a provisional consensus definition of agitation in patients with cognitive disorders that can be applied in epidemiologic, non-interventional clinical, pharmacologic, non-pharmacologic interventional, and neurobiological studies. A consensus definition will facilitate communication and cross-study comparison and may have regulatory applications in drug development programs. The ADWG developed a transparent process using a combination of electronic, face-to-face, and survey-based strategies to develop a consensus based on agreement of a majority of participants. Nine-hundred twenty-eight respondents participated in the different phases of the process. Agitation was defined broadly as: (1) occurring in patients with a cognitive impairment or dementia syndrome; (2) exhibiting behavior consistent with emotional distress; (3) manifesting excessive motor activity, verbal aggression, or physical aggression; and (4) evidencing behaviors that cause excess disability and are not solely attributable to another disorder (psychiatric, medical, or substance-related). A majority of the respondents rated all surveyed elements of the definition as "strongly agree" or "somewhat agree" (68-88% across elements). A majority of the respondents agreed that the definition is appropriate for clinical and research applications. A provisional consensus definition of agitation has been developed. This definition can be used to advance interventional and non-interventional research of agitation in patients with cognitive impairment.

  13. Provisional acceptance of installations and online data submission of PV and Hybrid kits in remote areas of Latin-America under the EC's EURO-SOLAR Programme

    Energy Technology Data Exchange (ETDEWEB)

    Cendagorta, M.; Rodriguez, J.; Lopez-Manzanares, L.; Linares, A. [Instituto Tecnologico y de Energias Renovables, S.A. (ITER), Granadilla de Abona (Spain)

    2010-07-01

    The EURO-SOLAR Programme is providing 600 isolated and rural communities in the 8 lesser developed countries in Latin America, with an electricity production facility based on both PV or Hybrid (PV and Wind) RE technologies. These installations are meant to provide this energy for community uses, rather than home and private usage, with these uses (computing, telecommunications, lighting, water purification, etc.) aimed to increase the degree of development within the communities. Two different companies were awarded the installation of these systems, after an international tender procedure, where ITER played a technical advisor role for the EC's DG EuropeAid. In the present phase of the project, where the systems are being installed, ITER has designed a provisional acceptance procedure (PA), in which both remote and in-situ verifications are carried out. This procedure has been developed in conjunction with a web application in order to ensure both transparency and traceability either of all actions and all actors involved in the process (Companies, ITER, Technical Assistance, EC, Communities). This application is also meant to act as a central repository where all the technical and administrative information of each one of the 600 systems could be found. This paper describes in detail this procedure, how it has been designed and what are the outcomes of all the processes aimed to guarantee the technical quality and the sustainability of the systems. (orig.)

  14. TECHNICAL TRAINING: Programmation automate Schneider TSX Premium 2ème niveau - French version only

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch CERN Technical Training 2003: Learning for the LHC ! Annonce de nouvelle formation - cours avancé Dans le cadre du programme de l'Enseignement Technique 2003, et en collaboration avec le GUAPI (Groupe des Utilisateurs d'Automates Programmables Industriels du CERN), une nouvelle formation a été organisée afin de perfectionner les connaissances sur l'outil PL7 de programmation des Automates PREMIUM de Schneider. Ce nouveau cours (niveau 2) s'adresse aux person...

  15. PERFIL DOS DISCENTES (INGRESSANTES E CONCLUINTES DE SECRETARIADO EXECUTIVO: UM ESTUDO COMPARATIVO NAS INSTITUIÇÕES DE ENSINO SUPERIOR (IES PÚBLICAS EXECUTIVE SECRETARIAT STUDENTS´ PROFILE (FRESHMEN AND SENIORS: A COMPARATIVE STYDY IN PUBLIC EDUCATION INSTITUTIONS

    Directory of Open Access Journals (Sweden)

    Vania Souza Bilert

    2012-05-01

    Full Text Available

    O objetivo deste artigo é identificar o perfil dos discentes, ingressantes e concluintes, dos cursos de graduação em secretariado executivo. A pesquisa foi realizada com os discentes de 11 Instituições de Ensino Superior (IES públicas brasileiras, estaduais e federais. O estudo configura-se como descritivo-exploratório, fazendo parte da amostra 507 discentes, sendo 311 ingressantes e 196 concluintes. Os principais resultados indicam que os discentes atuam em empresas de diversos segmentos, com destaque ao comércio e prestação de serviços; 87% são do gênero feminino e a faixa etária predominante é entre 17 a 24 anos. Destaca-se, como fator positivo, a atuação profissional dos discentes desde o início da graduação, exercendo as atribuições pertinentes ao profissional de secretariado executivo, o que revela que os discentes conseguem relacionar o que é aprendido em sala de aula com a prática profissional, o que também evidencia a aceitação do empresariado pelos profissionais de secretariado executivo.

    The objective of this paper is to identify the profile of beginner and graduate students who apply for Executive Secretariat graduation course. This research was carried out with students from 11 Brazilian public undergraduate schools, both federal and state ones. This is considered a descriptive and exploratory study, which analyzed 507 students, 311 beginners and 196 graduate ones. The main results show that students perform in different segment companies, but especially in service companies, 87% are female and the predominant age group is between 17 and 24 years old. In a positive way, this research stands out the factor that these students perform professionally since the beginning of the graduation, exerting the functions which are up to the Executive Secretariat professional. This reveals that the students are able to link what they have learned inside the classroom with the

  16. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    2010-01-01

    Operational Experience At the end of the first full-year running period of LHC, CMS is established as a reliable, robust and mature experiment. In particular common systems and infrastructure faults accounted for <0.6 % CMS downtime during LHC pp physics. Technical operation throughout the entire year was rather smooth, the main faults requiring UXC access being sub-detector power systems and rack-cooling turbines. All such problems were corrected during scheduled technical stops, in the shadow of tunnel access needed by the LHC, or in negotiated accesses or access extensions. Nevertheless, the number of necessary accesses to the UXC averaged more than one per week and the technical stops were inevitably packed with work packages, typically 30 being executed within a few days, placing a high load on the coordination and area management teams. It is an appropriate moment for CMS Technical Coordination to thank all those in many CERN departments and in the Collaboration, who were involved in CMS techni...

  17. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    2010-01-01

    Operational Experience Since the closure of the detector in February, the technical operation of CMS has been quite smooth and reliable. Some minor interventions in UXC were required to cure failures of power supplies, fans, readout boards and rack cooling connections, but all these failures were repaired in scheduled technical stops or parasitically during access dedicated to fixing LHC technical problems. The only occasion when CMS had to request an access between fills was to search for the source of an alarm from the leak-detection cables mounted in the DT racks. After a few minutes of diagnostic search, a leaking air-purge was found. Replacement was complete within 2 hours. This incident demonstrated once more the value of these leak detection cables; the system will be further extended (during the end of year technical stop) to cover more racks in UXC and the floor beneath the detector. The magnet has also been operating reliably and reacted correctly to the 14s power cut on 29 May (see below). In or...

  18. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Monday 9 February 2004 From 10:00 to 12:00 - IT Auditorium - bldg. 31, 3rd floor ANSOFT High-Frequency Seminar David Prestaux, Application Engineer, ANSOFT F-78535 BUC, France This Technical Training seminar will present two Ansoft application products: Ansoft HFSS and Ansoft Designer. Ansoft HFSS makes use of the Finite Element Method (FEM) to calculate field solutions from first principles. It can accurately predict all high-frequency behaviours such as dispersion, mode conversion, and losses due to materials and radiation. Ansoft Designer is a suite of design tools to fully integrate high-frequency, physics-based electromagnetic simulations into a seamless system-level simulation environment. Ansoft Designer uses a simple interface to give complete control over every design task, by a method allowing multiple solvers, Solver on Demand. • Introduction • Overview of the Ansoft Total solution • Ansoft HFSS 9...

  19. A cross-validation of the provisional diagnostic instrument (PDI-4

    Directory of Open Access Journals (Sweden)

    Faries Douglas E

    2012-10-01

    Full Text Available Abstract Background The Provisional Diagnostic Instrument (PDI-4 is a brief, adult self-report instrument for 4 common psychiatric diagnoses in primary care patients: major depressive episode (MDE, generalized anxiety disorder (GAD, attention deficit hyperactivity disorder (ADHD, and bipolar I disorder based on past or present mania. Our objective was to assess validity of the PDI-4 in a population independent of the study population originally used to develop the scale. Methods An online version of the 17-item PDI-4 was administered to 1,047 adults in the US; respondents also completed the PHQ-9, HADS-A, CAARS-S, and MDQ within the online survey. Respondents self-reported diagnosis by a healthcare professional with the terms depression (n=221, anxiety (n=218, attention deficit disorder (n=206, bipolar or manic depressive disorder (n=195, or none of these (n=207. Statistical analyses examined convergent and discriminant validity, and operating characteristics of the PDI-4 relative to the individual, validated, self-rated scales PHQ-9, HADS-A, CAARS-S, and MDQ, for each PDI-4 diagnosis. Results Convergent validity of the PDI-4 was supported by strong correlations with the corresponding individual scales (range of 0.63 [PDI-4 and MDQ] to 0.87 [PDI-4 and PHQ-9]. Operating characteristics of the PDI-4 were similar to results in the previous site-based study. The scale exhibited moderate sensitivities (0.52 [mania] to 0.70 [ADHD] and strong specificities (0.86 [mania] to 0.92 [GAD] using the individual scales as the gold standards. ANOVAs demonstrated that PDI-4 discriminated between subsets of patients defined by pre-specified severity level cutoff scores of the individual scales. However, overlapping symptoms and co-morbidities made differentiation between mental diagnoses much weaker than differentiation from the control group with none of the diagnoses. Conclusions The PDI-4 appears to be a suitable, brief, self-rated tool for provisional

  20. Physiologically-based pharmacokinetic model for Fentanyl in support of the development of Provisional Advisory Levels

    Energy Technology Data Exchange (ETDEWEB)

    Shankaran, Harish, E-mail: harish.shankaran@pnnl.gov [Computational Biology and Bioinformatics Group, Pacific Northwest National Laboratory, Richland, WA 99352 (United States); Adeshina, Femi [National Homeland Security Research Center, United States Environmental Protection Agency, Washington, DC 20460 (United States); Teeguarden, Justin G. [Systems Toxicology Group, Pacific Northwest National Laboratory, Richland, WA 99352 (United States)

    2013-12-15

    Provisional Advisory Levels (PALs) are tiered exposure limits for toxic chemicals in air and drinking water that are developed to assist in emergency responses. Physiologically-based pharmacokinetic (PBPK) modeling can support this process by enabling extrapolations across doses, and exposure routes, thereby addressing gaps in the available toxicity data. Here, we describe the development of a PBPK model for Fentanyl – a synthetic opioid used clinically for pain management – to support the establishment of PALs. Starting from an existing model for intravenous Fentanyl, we first optimized distribution and clearance parameters using several additional IV datasets. We then calibrated the model using pharmacokinetic data for various formulations, and determined the absorbed fraction, F, and time taken for the absorbed amount to reach 90% of its final value, t90. For aerosolized pulmonary Fentanyl, F = 1 and t90 < 1 min indicating complete and rapid absorption. The F value ranged from 0.35 to 0.74 for oral and various transmucosal routes. Oral Fentanyl was absorbed the slowest (t90 ∼ 300 min); the absorption of intranasal Fentanyl was relatively rapid (t90 ∼ 20–40 min); and the various oral transmucosal routes had intermediate absorption rates (t90 ∼ 160–300 min). Based on these results, for inhalation exposures, we assumed that all of the Fentanyl inhaled from the air during each breath directly, and instantaneously enters the arterial circulation. We present model predictions of Fentanyl blood concentrations in oral and inhalation scenarios relevant for PAL development, and provide an analytical expression that can be used to extrapolate between oral and inhalation routes for the derivation of PALs. - Highlights: • We develop a Fentanyl PBPK model for relating external dose to internal levels. • We calibrate the model to oral and inhalation exposures using > 50 human datasets. • Model predictions are in good agreement with the available

  1. Examining the provisional guidelines for weight gain in twin pregnancies: a retrospective cohort study.

    Science.gov (United States)

    Lutsiv, Olha; Hulman, Adam; Woolcott, Christy; Beyene, Joseph; Giglia, Lucy; Armson, B Anthony; Dodds, Linda; Neupane, Binod; McDonald, Sarah D

    2017-09-29

    Weight gain during pregnancy has an important impact on maternal and neonatal health. Unlike the Institute of Medicine (IOM) recommendations for weight gain in singleton pregnancies, those for twin gestations are termed "provisional", as they are based on limited data. The objectives of this study were to determine the neonatal and maternal outcomes associated with gaining weight below, within and above the IOM provisional guidelines on gestational weight gain in twin pregnancies, and additionally, to explore ranges of gestational weight gain among women who delivered twins at the recommended gestational age and birth weight, and those who did not. A retrospective cohort study of women who gave birth to twins at ≥20 weeks gestation, with a birth weight ≥ 500 g was conducted in Nova Scotia, Canada (2003-2014). Our primary outcome of interest was small for gestational age (<10th percentile). In order to account for gestational age at delivery, weekly rates of 2nd and 3rd trimester weight gain were used to categorize women as gaining below, within, or above guidelines. We performed traditional regression analyses for maternal outcomes, and to account for the correlated nature of the neonatal outcomes in twins, we used generalized estimating equations (GEE). A total of 1482 twins and 741 mothers were included, of whom 27%, 43%, and 30% gained below, within, and above guidelines, respectively. The incidence of small for gestational age in these three groups was 30%, 21%, and 20%, respectively, and relative to gaining within guidelines, the adjusted odds ratios were 1.44 (95% CI 1.01-2.06) for gaining below and 0.92 (95% CI 0.62-1.36) for gaining above. The gestational weight gain in women who delivered twins at 37-42 weeks with average birth weight ≥ 2500 g and those who delivered twins outside of the recommend ranges were comparable to each other and the IOM recommendations. While gestational weight gain below guidelines for twins was associated with some

  2. Multifactorial analysis of variables influencing the fracture strength of repair joints for provisional restorative materials using the statistically based Taguchi method

    Directory of Open Access Journals (Sweden)

    Chun-Jen Cheng

    2010-06-01

    Conclusion: Within the limitations of this study, these four design factors had different contributions to the fracture strength of repaired provisional restorations. Clinicians must be aware of the sequence of importance in determining better problem-solving methods.

  3. Effect of water temperature on the fit of provisional crown margins during polymerization: An in vitro study

    Science.gov (United States)

    Ramkumar, Vivekanandan; Sangeetha, Arunachalam; Kumar, Vinaya

    2012-01-01

    Aim: To evaluate the effect of water temperature on the marginal fit of bis-acrylic composite provisional crown during resin polymerization. Materials and Methods: Precisely machined 10 brass master dies were designed to simulate molar teeth. Five brass dies were selected and precisely machined to simulate all ceramic crown preparation. An acrylic jaw replica was made in which brass dies were arranged equidistant from each other. A custom-made metallic tray was fabricated on the acrylic jaw replica to make polyvinyl siloxane impression matrix. Bis-acrylic composite resin provisional crowns were made using polyvinyl siloxane impression matrix. Provisional crowns were polymerized at room temperature (Group I direct technique, on dental stone cast; Group I indirect technique crowns) and at different water temperatures (Group II direct technique crowns). The vertical marginal gap between all the provisional crown margins and the finish line of brass dies was measured using a Research Stereomicroscope System. Results: The results were statistically analyzed using one-way analysis of variance (ANOVA) test and Newman–Keul's test. The results showed that crowns polymerized in 20°C and 30°C water had marginal gap approximately three times smaller than those polymerized in 30°C air, due to the reduced polymerization shrinkage. Conclusion: This study shows that crowns polymerized in 20°C and 30°C water had mean vertical marginal gap approximately three times smaller than those polymerized in 30°C air. It was approximately closer to that of crowns fabricated by indirect technique. Warmer water also supposedly hastens polymerization. PMID:23066294

  4. Coronal leakage of provisional restorative materials used in endodontics with and without intracanal medication after exposure to human saliva

    Directory of Open Access Journals (Sweden)

    P Udayakumar

    2016-01-01

    Full Text Available Aim: To determine the coronal leakage of various provisional restorations with and without intracanal medication over time after being exposed to human saliva. Materials and Methods: This study investigated Coltosol F, Cavit, Ketac Molar, and IRM as provisional restorative material. Calcium hydroxide and chlorhexidine were used as an intracanal medicament. Ninety-eight single rooted teeth were randomly selected and then mounted in an apparatus that isolated the crown portion of the tooth. Provisional restorative materials were placed in the access cavity following manufacturer guidelines after placement of intracanal medicament. Human saliva and brain heart infusion broth in 3:1 ratio were applied to the samples, incubated at 37°C, and results were tabulated over the course of 4 weeks by the appearance of turbidity in the lower part of the apparatus. Statistical Analysis: The data were statistically analyzed using proportional Z-test. The level of significance was set at 0.05. Results: Coltosol F and Cavit could significantly prevent the bacterial leakage up to a period of 7 days with a P value of 0.01 and 0.005, respectively. Bacterial recontamination was relatively less in the samples treated with intracanal medicaments up to 14 days. After 14 days, however, all materials leaked in over half of the samples. Conclusion: No provisional restorative material can be considered superior in providing a reliable seal after 14 days. Inter-appointments schedule should not extend beyond 2 weeks and after endodontic therapy final restoration should be completed within 1 week.

  5. The Effect of Different Fiber Concentrations on the Surface Roughness of Provisional Crown and Fixed Partial Denture Resin

    OpenAIRE

    Zortuk, Mustafa; K?l?c, Kerem; Uzun, Gulay; Ozturk, Ahmet; Kesim, Bulent

    2008-01-01

    Objectives The aim of this study was to investigate surface roughness in provisional crown acrylics, after polishing, reinforced with different concentrations of glass fibers. Methods A total of 48 disk-shaped specimens were prepared using autopolymerizing acrylic resin. These specimens were divided into four groups according to the level of glass fiber added: Group A (no fiber), Group B (0.5%), Group C (1%) and Group D (2%). After polishing the specimens, an average surface roughness (Ra) va...

  6. Randomized comparison between provisional and routine kissing-balloon technique after main vessel crossover stenting for coronary bifurcation lesions.

    Science.gov (United States)

    Yamawaki, Masahiro; Fujita, Masaki; Sasaki, Shinya; Tsurugida, Masanori; Nanasato, Mamoru; Araki, Motoharu; Hirano, Keisuke; Ito, Yoshiaki; Tsukahara, Reiko; Muramatsu, Toshiya

    2017-04-11

    We compared the myocardial ischemic burden of provisional and routine final kissing-balloon inflation (FKI) with the 1-stent strategy using a second-generation drug-eluting stent for coronary bifurcation lesions (CBL). There are no established guidelines for side branch (SB) intervention after main vessel stenting. In total, 113 CBL patients were randomized to receive different SB intervention strategies: provisional-FKI group (n = 57; FKI only when SB flow was TIMI stress myocardial perfusion scintigraphy with (99m)Tc was performed after 8 months. The regional summed-difference score (r-SDS) was calculated according to the coronary territory. The primary endpoint included target vessel ischemia (TVI; r-SDS ≥ 2) at 8 months, whereas the clinical primary endpoint was major adverse cardiovascular events (MACE) at 3 years. The percent (%) myocardial ischemia (100 × SDS/68) was also calculated. At 8 months, TVI was identified in 11 and 4% in the provisional-FKI and routine-FKI groups, respectively (p = 0.226). SB-binary restenosis (48 vs. 4%, p 10% myocardial ischemia) was not observed in the target vessel in either group. Long-term cumulative MACE were similar between the groups (9 vs. 14%; p = 0.358). Provisional-FKI according to TIMI-SB flow grade led to similar and acceptable myocardial ischemia, in comparison with routine-FKI, which may contribute to the identical long-term follow-up.

  7. Effect of water temperature on the fit of provisional crown margins during polymerization: An in vitro study

    Directory of Open Access Journals (Sweden)

    Vivekanandan Ramkumar

    2012-01-01

    Full Text Available Aim: To evaluate the effect of water temperature on the marginal fit of bis-acrylic composite provisional crown during resin polymerization. Materials and Methods: Precisely machined 10 brass master dies were designed to simulate molar teeth. Five brass dies were selected and precisely machined to simulate all ceramic crown preparation. An acrylic jaw replica was made in which brass dies were arranged equidistant from each other. A custom-made metallic tray was fabricated on the acrylic jaw replica to make polyvinyl siloxane impression matrix. Bis-acrylic composite resin provisional crowns were made using polyvinyl siloxane impression matrix. Provisional crowns were polymerized at room temperature (Group I direct technique, on dental stone cast; Group I indirect technique crowns and at different water temperatures (Group II direct technique crowns. The vertical marginal gap between all the provisional crown margins and the finish line of brass dies was measured using a Research Stereomicroscope System. Results: The results were statistically analyzed using one-way analysis of variance (ANOVA test and Newman-Keul′s test. The results showed that crowns polymerized in 20°C and 30°C water had marginal gap approximately three times smaller than those polymerized in 30°C air, due to the reduced polymerization shrinkage. Conclusion: This study shows that crowns polymerized in 20°C and 30°C water had mean vertical marginal gap approximately three times smaller than those polymerized in 30°C air. It was approximately closer to that of crowns fabricated by indirect technique. Warmer water also supposedly hastens polymerization.

  8. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    Overview From a technical perspective, CMS has been in “beam operation” state since 6th November. The detector is fully closed with all components operational and the magnetic field is normally at the nominal 3.8T. The UXC cavern is normally closed with the radiation veto set. Access to UXC is now only possible during downtimes of LHC. Such accesses must be carefully planned, documented and carried out in agreement with CMS Technical Coordination, Experimental Area Management, LHC programme coordination and the CCC. Material flow in and out of UXC is now strictly controlled. Access to USC remains possible at any time, although, for safety reasons, it is necessary to register with the shift crew in the control room before going down.It is obligatory for all material leaving UXC to pass through the underground buffer zone for RP scanning, database entry and appropriate labeling for traceability. Technical coordination (notably Stephane Bally and Christoph Schaefer), the shift crew and run ...

  9. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2011-01-01

    In this report we will review the main achievements of the Technical Stop and the progress of several centrally-managed projects to support CMS operation and maintenance and prepare the way for upgrades. Overview of the extended Technical Stop  The principal objectives of the extended Technical Stop affecting the detector itself were the installation of the TOTEM T1 telescopes on both ends, the readjustment of the alignment link-disk in YE-2, the replacement of the light-guide sleeves for all PMs of both HFs, and some repairs on TOTEM T2 and CASTOR. The most significant tasks were, however, concentrated on the supporting infrastructure. A detailed line-by-line leak search was performed in the C6F14 cooling system of the Tracker, followed by the installation of variable-frequency drives on the pump motors of the SS1 and SS2 tracker cooling plants to reduce pressure transients during start-up. In the electrical system, larger harmonic filters were installed in ...

  10. Provisional Tic Disorder: What to tell parents when their child first starts ticcing

    Science.gov (United States)

    Black, Kevin J; Black, Elizabeth Rose; Greene, Deanna J.; Schlaggar, Bradley L.

    2016-01-01

    The child with recent onset of tics is a common patient in a pediatrics or child neurology practice. If the child’s first tic was less than a year in the past, the diagnosis is usually Provisional Tic Disorder (PTD). Published reviews by experts reveal substantial consensus on prognosis in this situation: the tics will almost always disappear in a few months, having remained mild while they lasted. Surprisingly, however, the sparse existing data may not support these opinions. PTD may have just as much importance for science as for clinical care. It provides an opportunity to prospectively observe the spontaneous remission of tics. Such prospective studies may aid identification of genes or biomarkers specifically associated with remission rather than onset of tics. A better understanding of tic remission may also suggest novel treatment strategies for Tourette syndrome, or may lead to secondary prevention of tic disorders. This review summarizes the limited existing data on the epidemiology, phenomenology, and outcome of PTD, highlights areas in which prospective study is sorely needed, and proposes that tic disorders may completely remit much less often than is generally believed. PMID:27158458

  11. Soft Tissue Augmentation Techniques in Implants Placed and Provisionalized Immediately: A Systematic Review

    Directory of Open Access Journals (Sweden)

    Rosa Rojo

    2016-01-01

    Full Text Available The aim of this study was to evaluate the effectiveness of techniques for soft tissue augmentation in the placement of immediate implants with and without provisionalization and to assess the quality of the reports in the literature. Randomized clinical trials, prospective clinical trials, and case series were included in this review. Clinical questions were formulated and organised according to the PICOS strategy. An electronic search was performed in PubMed, Cochrane Central Register of Controlled Trials, Scopus, and ISI Web up until June 2016. Interexaminer agreement on eligibility (k=0.842; p=0.103 and quality (k=0.933; p<0.001 was high. Methodological approaches were assessed using criteria based on design related forms designed by the Dutch Cochrane Collaboration. Finally, 14 papers were identified. In two studies, the implant survival was 90%; for the rest of the studies it was 100%. All studies reported favourable aesthetic, biological, and radiographic outcomes. Surgical and biomechanical complications of this technique were not relevant. This technique effectively compensates for the expected loss of volume of the oral soft tissues and maintains high success rates with good aesthetic results over time.

  12. Provisional Matrix Deposition in Hemostasis and Venous Insufficiency: Tissue Preconditioning for Nonhealing Venous Ulcers

    Science.gov (United States)

    Parker, Tony J.; Broadbent, James A.; McGovern, Jacqui A.; Broszczak, Daniel A.; Parker, Christina N.; Upton, Zee

    2015-01-01

    Significance: Chronic wounds represent a major burden on global healthcare systems and reduce the quality of life of those affected. Significant advances have been made in our understanding of the biochemistry of wound healing progression. However, knowledge regarding the specific molecular processes influencing chronic wound formation and persistence remains limited. Recent Advances: Generally, healing of acute wounds begins with hemostasis and the deposition of a plasma-derived provisional matrix into the wound. The deposition of plasma matrix proteins is known to occur around the microvasculature of the lower limb as a result of venous insufficiency. This appears to alter limb cutaneous tissue physiology and consequently drives the tissue into a ‘preconditioned’ state that negatively influences the response to wounding. Critical Issues: Processes, such as oxygen and nutrient suppression, edema, inflammatory cell trapping/extravasation, diffuse inflammation, and tissue necrosis are thought to contribute to the advent of a chronic wound. Healing of the wound then becomes difficult in the context of an internally injured limb. Thus, interventions and therapies for promoting healing of the limb is a growing area of interest. For venous ulcers, treatment using compression bandaging encourages venous return and improves healing processes within the limb, critically however, once treatment concludes ulcers often reoccur. Future Directions: Improved understanding of the composition and role of pericapillary matrix deposits in facilitating internal limb injury and subsequent development of chronic wounds will be critical for informing and enhancing current best practice therapies and preventative action in the wound care field. PMID:25785239

  13. Canadian Federalism in Design and Practice: The Mechanics of a Permanently Provisional Constitution

    Directory of Open Access Journals (Sweden)

    Gardner James A.

    2017-12-01

    Full Text Available This paper examines the interaction between constitutional design and practice through a case study of Canadian federalism. Focusing on the federal architecture of the Canadian Constitution, the paper examines how subnational units in Canada actually compete with the central government, emphasizing the concrete strategies and tactics they most commonly employ to get their way in confrontations with central authority. The evidence affirms that constitutional design and structure make an important difference in the tactics and tools available to subnational units in a federal system, but that design is not fully constraining: there is considerable evidence of extraconstitutional innovation and improvisation by governments. Furthermore, changes in practice initiated by Canadian subnational actors have produced changes in the allocation of national and subnational authority that are plausibly characterized as constitutional in magnitude. The paper concludes that the design of the Canadian federal system may inadvertently undermine its capacity to stabilize itself at any particular point of constitutional evolution, making it ‘permanently provisional.’

  14. Soft Tissue Augmentation Techniques in Implants Placed and Provisionalized Immediately: A Systematic Review.

    Science.gov (United States)

    Rojo, Rosa; Prados-Frutos, Juan Carlos; Manchón, Ángel; Rodríguez-Molinero, Jesús; Sammartino, Gilberto; Calvo Guirado, José Luis; Gómez-de Diego, Rafael

    2016-01-01

    The aim of this study was to evaluate the effectiveness of techniques for soft tissue augmentation in the placement of immediate implants with and without provisionalization and to assess the quality of the reports in the literature. Randomized clinical trials, prospective clinical trials, and case series were included in this review. Clinical questions were formulated and organised according to the PICOS strategy. An electronic search was performed in PubMed, Cochrane Central Register of Controlled Trials, Scopus, and ISI Web up until June 2016. Interexaminer agreement on eligibility (k = 0.842; p = 0.103) and quality (k = 0.933; p < 0.001) was high. Methodological approaches were assessed using criteria based on design related forms designed by the Dutch Cochrane Collaboration. Finally, 14 papers were identified. In two studies, the implant survival was 90%; for the rest of the studies it was 100%. All studies reported favourable aesthetic, biological, and radiographic outcomes. Surgical and biomechanical complications of this technique were not relevant. This technique effectively compensates for the expected loss of volume of the oral soft tissues and maintains high success rates with good aesthetic results over time.

  15. ¿Cuánto cuesta el rescate bancario?: una estimación provisional

    Directory of Open Access Journals (Sweden)

    José Francisco Bellod Redondo

    2013-01-01

    Full Text Available en este trabajo presentamos una estimación provisional del importe de los recursos movilizados por las Administraciones Públicas en favor de los bancos españoles. Como el proceso de rescate bancario aún no ha finalizado y, como ciertos costes han de tener lugar en el futuro, la cuantificación es necesariamente incompleta. Según nuestras estimaciones los recursos inyectados ascienden a día de hoy a más de 126.000 millones de euros (11´9% del PIB, de los cuales más de 41.000 millones son irrecuperables. La venta de bancos a precios simbólicos ha sido una operación muy gravosa por la cual se han perdido 13.548 millones de euros. Aparte habría que computar los recursos procedentes del Banco Central Europeo (BCE, más de 340.000 millones de euros.

  16. Work and organisation in wood fuel systems. Provisional results from a pilot project

    Energy Technology Data Exchange (ETDEWEB)

    Ager, B. [Swedish Univ. of Agricultural Sciences, Dept. of Operational Efficiency, Garpenberg (Sweden); Soederqvist, A. [WE-Consulting AB, Tyresoe (Sweden)

    1996-12-31

    The use of wood fuels in Sweden has increased dramatically over the last few years. So far wood chips from tops and limbs and waste from the lumber/wood working industry have been the primary fuel sources. However, upgraded wood fuels, mainly in the shape of pellets, are rapidly gaining ground and used wood and short rotation forests are other sources under expansion. In the modern wood fuel sector new technology and production systems are being tested and introduced and new organisational structures and enterprises are developing. But rather few studies have been carried out concerning the conditions for the workers engaged in the production systems. An area which has attracted several studies is health hazards caused by various kinds of air pollutants, such as dust and moulds, but in most other areas knowledge is rather scarce. After a minor introductory study a comprehensive pilot project was formulated. The project is titled `Work and organisation in wood fuel systems` and will run from July 1996 to March 1998. The main objective of this project is to investigate working environment and work organisation in wood fuel systems in order to identify problems and ways of achieving improvement and development. This paper will discuss provisional results from studies of three selected production systems, which are especially common or expanding - harvest and transport of logging residues, production of wood pellets, and heating plants. (au)

  17. Redesign of a fixture mount to be used as an impression coping and a provisional abutment as well

    Directory of Open Access Journals (Sweden)

    Glenn Hsuan-Chen Chang

    2011-01-01

    Full Text Available Purpose: An integrated fixture mount/impression coping/ temporary abutment can provide many advantages for immediate loading of dental implants, such as simpler procedure, less chair time, cost reduction, and comfort for the patients. Materials and Methods: A newly designed dental implant fixture mount (DIFMA can be used as an impression coping for taking an immediate impression. An immediate load provisional prosthesis can then be fabricated shortly after implant placement to immediately load the implants. This fixture mount can also serve as a temporary abutment for immediate chair-side fabrication of provisional prosthesis. Two clinical cases are presented. Results: A clinical case utilizing the fixture mount abutment (DIFMA/implant assembly is presented. The precision of fitting between the impression copings and implants is secured with this system. The chair time for taking an immediate impression is greatly reduced. Less cost for the restoration is provided and patient comfort is delivered. Conclusions: More patient satisfaction can be conferred by employing the fixture mount in the process of immediate impression taking and as an immediate provisional abutment.

  18. The success rate of narrow body implants used for supporting immediate provisional restorations: a pilot feasibility study.

    Science.gov (United States)

    Wang, Hom-Lay; Okayasu, Kozue; Fu, Jia-Hui; Hamerink, Howard A; Layher, Mary G; Rudek, Ivan Elimar

    2012-12-01

    Implants were first designed to be used in the reconstruction of edentulous mandibles. However, with the technological advancement, enormous changes were made to improve the implant design and surface characteristics leading to the wide use of implants in the replacement of missing teeth. During the transition from an edentulous span to a fixed prosthesis, narrow body implants (NBIs) have been proposed to enhance patient comfort and function. Therefore, this study was aimed at investigating the survival and success rates of NBIs used for supporting immediately nonfunctional loaded provisional fixed partial denture (PFPD). Either 2.2- or 2.4-mm-diameter dental implants were placed transmucosally into the edentulous ridges of 10 partially edentulous patients. PFPD of self-cured bis-acryl composite material were made using either a vacuform template chairside or a relined prefabricated PFPD. Occlusal adjustments were made to ensure that there was no functional loading on the provisional restorations before they were secured onto the transitional implants. At 1 year, the implant success and survival rates were 38.7% and 93.5%, respectively, with a mean percentage of bone loss of 9.46% (0%-40%) and a mean bone loss of 1.19 mm (range: 0-3.5 mm). With a favorable implant survival rate, the use of NBIs to support provisional restorations seemed to be a feasible treatment option. In addition, there is merit for research on the long-term use of NBIs-supported final prostheses.

  19. Effect of dentin adhesives used as sealers and provisional cementation on bond strength of a resin cement to dentin.

    Science.gov (United States)

    Chieffi, Nicoletta; Sadek, Fernanda; Monticelli, Francesca; Goracci, Cecilia; Grandini, Simone; Davidson, Carel; Tay, Franklin R; Ferrari, Marco

    2006-04-01

    To evaluate the effects of dentin adhesives employed as resin sealers and provisional cementation on the bond strengths of a resin cement to dentin. A two-step etch-and-rinse adhesive (Excite DSC--Group 1) and two-step self-etch adhesive (AdheSE--Group 2) were applied to exposed dentin surfaces prepared from human molars (N=4). Water was used instead of a resin sealer in control Groups 3 and 4. A eugenol-free provisional cement (except for Group 4) was applied to the treated surfaces. After storing in distilled water for 1 week, the provisional cement was removed and cylindrical composite blocks were luted with a resin cement (Variolink II). 0.9 x 0.9 mm sticks were produced from these luted specimens for microtensile bond testing and SEM examination. One-way ANOVA revealed that neither the resin sealer nor the temporary eugenol-free cement had a negative effect on the final bond strength (P> 0.05). Mixed failures were predominantly identified from SEM.

  20. Immediate implant placement and provisionalization with and without a connective tissue graft: an analysis of facial gingival tissue thickness.

    Science.gov (United States)

    Rungcharassaeng, Kitichai; Kan, Joseph Y K; Yoshino, Shuji; Morimoto, Taichiro; Zimmerman, Grenith

    2012-12-01

    Facial gingival tissue thickness (FGTT) is important for an esthetically pleasing anterior restoration since it determines the soft tissue's ability to conceal the underlying restorative material. The purpose of this study was to investigate the change in FGTT after immediate implant placement and provisionalization with and without a connective tissue graft. Patients with a failing maxillary anterior tooth planned for immediate implant placement and provisionalization with (CT group) or without (NCT group) a subepithelial connective tissue graft were included in this study. After tooth extraction, direct measurement of the FGTT was performed; subsequent measurements were performed at the time of definitive prosthesis placement. Data were analyzed using independent and paired t tests at a significance level of α = .05. There was no statistically significant difference in the mean FGTT at tooth extraction between the CT and NCT groups. At prosthesis delivery, the mean FGTT for the CT group was significantly greater than that of the NCT group. The mean FGTT of both groups at prosthesis delivery was significantly higher than that at tooth extraction. The mean change in FGTT in the CT group was also significantly greater than that in the NCT group. Immediate implant placement and provisionalization in conjunction with a connective tissue graft is more likely to result in sufficient peri-implant tissue thickness to conceal underlying implant restorative materials than when performed without a connective tissue graft.

  1. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Switzerland (please sp...

  2. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Swi...

  3. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2013-01-01

    For the reporting period, the CMS common systems and infrastructure worked well, without failures that caused significant data losses. One more disconnection of the magnet cold box occurred in the shadow of interruptions in data taking, caused by a series of technical faults. The recognition during 2012 that re-connection can only safely be done at around 2 T implies a minimum magnet recovery time of 12 hours and raises serious concerns about the number of ramping cycles of the magnet these incidents cause. This has triggered studies of how to make the cryo-system of the magnet more robust against failures. The proton-proton run ended just before the end-of-year CERN closure, during which CASTOR was installed on the negative end of CMS and both ZDC calorimeters were installed in TAN absorbers the LHC tunnel, in preparation for the heavy-ion run. The installation of CASTOR was an excellent “engineering test” of procedures for working in an activated environment. Despite some technical pr...

  4. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2011-01-01

      Operational experience 2011 CMS is approaching the end of a very successful year of operation. Proton- proton running ended in the late afternoon of 30th October with a stunning 5.73 fb–1 delivered by LHC, of which CMS recorded 5.22 fb–1. During heavy-ion operation, which continues until 7th December, both the accelerator and the CMS detector have also performed very well. Despite the encouraging overall reliability of technical operation, several infrastructure failures which occurred since the last Bulletin are worthy of mention, with one leading for the first time to significant data-loss. On 10th July, a CERN-wide power failure brought down essentially all services including the magnet, due to an MCS setting being left in “manual” after the recent technical stop, but there was no significant damage and the detector was operational before the LHC, despite a slow and tortuous recovery (one of several indications this year that there is room for improve...

  5. TECHNICAL COORDINATION

    CERN Multimedia

    Austin Ball

    Summary of progress since last CMS week. Ten years of construction work have been completed. CMS is closed, in very close to the ideal low luminosity configuration, and performed well in the first tests with LHC beam. Behind this encouraging news is the story of a summer of intense commitment by many teams (from the collaboration and 3 CERN departments) working together, against the clock and despite many minor setbacks, to ensure that the experiment was ready to play a leading role in the excitement of September 10. Following beampipe bakeout and refill with pure neon, a magnificent effort by the ECAL group and the pt 5 technical crew made it possible to install and commission all 4 ECAL endcap Dees before the end of August. In the shadow of this activity, the barrel and forward pixel trackers and part of the beam monitoring were installed within the vac tank. The pt 5 technical teams then succeeded in safely removing the 20t installation tables and their support blocks from beneath the already installed ...

  6. Technical Training: CERN Technical Training 2004: Instructor-led WBTechT Course for Microsoft Applications

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The Instructor-led CERN WBTechT course for Microsoft Applications is a new type of course offered in the framework of the Technical Training Programme, combining instructor-led and computer-based multimedia training, also known as "blended learning". The next sessions will take place on the 12, 19, and 26 February (Thursday mornings), and subsequent sessions will be organised following demand. Based on the new ElementK 2004 CERN WBTechT catalogue, courses will be self-paced and self-d...

  7. Deriving a provisional tolerable intake for intravenous exposure to silver nanoparticles released from medical devices.

    Science.gov (United States)

    Savery, Laura C; Viñas, René; Nagy, Amber M; Pradeep, Prachi; Merrill, Stephen J; Hood, Alan M; Malghan, Subhas G; Goering, Peter L; Brown, Ronald P

    2017-04-01

    Silver nanoparticles (AgNP) are incorporated into medical devices for their anti-microbial characteristics. The potential exposure and toxicity of AgNPs is unknown due to varying physicochemical particle properties and lack of toxicological data. The aim of this safety assessment is to derive a provisional tolerable intake (pTI) value for AgNPs released from blood-contacting medical devices. A literature review of in vivo studies investigating critical health effects induced from intravenous (i. v.) exposure to AgNPs was evaluated by the Annapolis Accords principles and Toxicological Data Reliability Assessment Tool (ToxRTool). The point of departure (POD) was based on an i. v. 28-day repeated AgNP (20 nm) dose toxicity study reporting an increase in relative spleen weight in rats with a 5% lower confidence bound of the benchmark dose (BMDL05) of 0.14 mg/kg bw/day. The POD was extrapolated to humans by a modifying factor of 1,000 to account for intraspecies variability, interspecies differences and lack of long-term toxicity data. The pTI for long-term i. v. exposure to 20 nm AgNPs released from blood-contacting medical devices was 0.14 μg/kg bw/day. This pTI may not be appropriate for nanoparticles of other physicochemical properties or routes of administration. The methodology is appropriate for deriving pTIs for nanoparticles in general. Published by Elsevier Inc.

  8. Provisional in-silico biopharmaceutics classification (BCS) to guide oral drug product development

    Science.gov (United States)

    Wolk, Omri; Agbaria, Riad; Dahan, Arik

    2014-01-01

    The main objective of this work was to investigate in-silico predictions of physicochemical properties, in order to guide oral drug development by provisional biopharmaceutics classification system (BCS). Four in-silico methods were used to estimate LogP: group contribution (CLogP) using two different software programs, atom contribution (ALogP), and element contribution (KLogP). The correlations (r2) of CLogP, ALogP and KLogP versus measured LogP data were 0.97, 0.82, and 0.71, respectively. The classification of drugs with reported intestinal permeability in humans was correct for 64.3%–72.4% of the 29 drugs on the dataset, and for 81.82%–90.91% of the 22 drugs that are passively absorbed using the different in-silico algorithms. Similar permeability classification was obtained with the various in-silico methods. The in-silico calculations, along with experimental melting points, were then incorporated into a thermodynamic equation for solubility estimations that largely matched the reference solubility values. It was revealed that the effect of melting point on the solubility is minor compared to the partition coefficient, and an average melting point (162.7°C) could replace the experimental values, with similar results. The in-silico methods classified 20.76% (±3.07%) as Class 1, 41.51% (±3.32%) as Class 2, 30.49% (±4.47%) as Class 3, and 6.27% (±4.39%) as Class 4. In conclusion, in-silico methods can be used for BCS classification of drugs in early development, from merely their molecular formula and without foreknowledge of their chemical structure, which will allow for the improved selection, engineering, and developability of candidates. These in-silico methods could enhance success rates, reduce costs, and accelerate oral drug products development. PMID:25284986

  9. Technical presentation

    CERN Multimedia

    FP Department

    2009-01-01

    07 April 2009 Technical presentation by Leuze Electronics: 14.00 – 15.00, Main Building, Room 61-1-017 (Room A) Photoelectric sensors, data identification and transmission systems, image processing systems. We at Leuze Electronics are "the sensor people": we have been specialising in optoelectronic sensors and safety technology for accident prevention for over 40 years. Our dedicated staff are all highly customer oriented. Customers of Leuze Electronics can always rely on one thing – on us! •\tFounded in 1963 •\t740 employees •\t115 MEUR turnover •\t20 subsidiaries •\t3 production facilities in southern Germany Product groups: •\tPhotoelectric sensors •\tIdentification and measurements •\tSafety devices

  10. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2010-01-01

    Overview Once again, the bulk of this article reviews the intense activity of a recently completed shutdown, which, although quite unforeseeable until a few weeks before it started, proved by its success that our often advertised capability to conduct major maintenance within a two month period is real. Although safely completed, on-time to remarkable precision, the activity was not without incident, and highlighted our dependence on many experienced, specialist teams and their precise choreography. Even after the yoke was safely closed, magnet re-commissioning and beampipe pumpdown showed new and thought-provoking behaviour. The struggle to maintain adequate technical resources will be a pre-occupation over the coming months, in parallel with the start of truly sustained operation, for which various procedures are still being put in place. Planning for future shutdowns must now become a high priority, with many working groups and task forces already in existence to prepare infrastructure improvements and to...

  11. Technical presentation

    CERN Multimedia

    FI Department

    2008-01-01

    RADIOSPARES, the leading catalogue distributor of components (electronic, electrical, automation, etc.) and industrial supplies will be at CERN on Friday 3 October 2008 (Main Building, Room B, from 9.00 a.m. to 3.00 p.m.) to introduce its new 2008/2009 catalogue. This will be the opportunity for us to present our complete range of products in more detail: 400 000 part numbers available on our web site (Radiospares France, RS International, extended range of components from other manufacturers); our new services: quotations, search for products not included in the catalogue, SBP products (Small Batch Production: packaging in quantities adapted to customers’ requirements); partnership with our focus manufacturers; demonstration of the on-line purchasing tool implemented on our web site in conjunction with CERN. RADIOSPARES will be accompanied by representatives of FLUKE and TYCO ELECTRONICS, who will make presentations, demonstrate materials and answer any technical questio...

  12. Technical presentation

    CERN Multimedia

    GS Department

    2010-01-01

    10 March 2010 DYNEOS 10:00 – 12:00 - Main Building, Room B, 61-1-009 Dyneos AG is active in the fields of photonics, laser and high-precision positioning. Our highly qualified engineer team has more than 30 years of experience in electro-optical solutions sales. The engineers are supported by a technical and administrative team. We are focused on the Swiss market and represent six suppliers (Coherent, PI Physik Instrumente, SIOS, Nanonics Imaging, APE, Ekspla) in order to give a qualified sales and service support to our customers. Our products are dedicated to the research field as well as to industry. In addition to standard catalog products, we offer custom designs to fulfill the specific needs of OEM customers or specific applications.

  13. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Tuesday 3 February 2004 From 09:00 to 13:30 - Training Centre Auditorium - bldg. 593, room 11 USB (Universal Serial Bus) CYPRESS Seminar Claudia Colombini, Field Application Engineer CYPRESS ActiveComp Electronic GmbH D-85077 MANCHING, Germany As a pioneer in USB, CYPRESS sets the standard for cost-effective solutions without sacrificing functionality, performance or reliability. Having shipped over 200 million USB devices, Cypress is the undisputed market leader and demonstrates unmatched USB expertise. With the industry's broadest selection of USB solutions, Cypress has the right silicon, software and support for every USB application, from Low-speed to High-Speed and USB On-The-Go (OTG). 9:00 - 10:30 Overview of USB systems. USB CYPRESS product overview. Peripherals: Low Speed, Full Speed, High Speed (1.1 and 2.0). Hub Solutions, Embedded Host Solutions, On-The-Go (OTG) and wireless USB. USB Development Tools (first part) 10:30 -...

  14. The EBC TWO Study (European Bifurcation Coronary TWO): A Randomized Comparison of Provisional T-Stenting Versus a Systematic 2 Stent Culotte Strategy in Large Caliber True Bifurcations.

    Science.gov (United States)

    Hildick-Smith, David; Behan, Miles W; Lassen, Jens F; Chieffo, Alaide; Lefèvre, Thierry; Stankovic, Goran; Burzotta, Francesco; Pan, Manuel; Ferenc, Miroslaw; Bennett, Lorraine; Hovasse, Thomas; Spence, Mark J; Oldroyd, Keith; Brunel, Philippe; Carrie, Didier; Baumbach, Andreas; Maeng, Michael; Skipper, Nicola; Louvard, Yves

    2016-09-01

    For the treatment of coronary bifurcation lesions, a provisional strategy is superior to systematic 2-stent techniques for the most bifurcation lesions. However, complex anatomies with large side branches (SBs) with significant ostial disease length are considered by expert consensus to warrant a 2-stent technique upfront. This consensus view has not been scientifically assessed. Symptomatic patients with large caliber true bifurcation lesions (SB diameter ≥2.5 mm) and significant ostial disease length (≥5 mm) were randomized to either a provisional T-stent strategy or a dual stent culotte technique. Two hundred patients aged 64±10 years, 82% male, were randomized in 20 European centers. The clinical presentations were stable coronary disease (69%) and acute coronary syndromes (31%). SB stent diameter (2.67±0.27 mm) and length (20.30±5.89 mm) confirmed the extent of SB disease. Procedural success (provisional 97%, culotte 94%) and kissing balloon inflation (provisional 95%, culotte 98%) were high. Sixteen percent of patients in the provisional group underwent T-stenting. The primary end point (a composite of death, myocardial infarction, and target vessel revascularization at 12 months) occurred in 7.7% of the provisional T-stent group versus 10.3% of the culotte group (hazard ratio, 1.02; 95% confidence interval, 0.78-1.34; P=0.53). Procedure time, x-ray dose, and cost all favored the simpler procedure. When treating complex coronary bifurcation lesions with large stenosed SBs, there is no difference between a provisional T-stent strategy and a systematic 2-stent culotte strategy in a composite end point of death, myocardial infarction, and target vessel revascularization at 12 months. URL: http://www.clinicaltrials.gov. Unique identifier: NCT 01560455. © 2016 American Heart Association, Inc.

  15. Developing a provisional, international minimal dataset for Juvenile Dermatomyositis: for use in clinical practice to inform research.

    Science.gov (United States)

    McCann, Liza J; Arnold, Katie; Pilkington, Clarissa A; Huber, Adam M; Ravelli, Angelo; Beard, Laura; Beresford, Michael W; Wedderburn, Lucy R

    2014-01-01

    Juvenile dermatomyositis (JDM) is a rare but severe autoimmune inflammatory myositis of childhood. International collaboration is essential in order to undertake clinical trials, understand the disease and improve long-term outcome. The aim of this study was to propose from existing collaborative initiatives a preliminary minimal dataset for JDM. This will form the basis of the future development of an international consensus-approved minimum core dataset to be used both in clinical care and inform research, allowing integration of data between centres. A working group of internationally-representative JDM experts was formed to develop a provisional minimal dataset. Clinical and laboratory variables contained within current national and international collaborative databases of patients with idiopathic inflammatory myopathies were scrutinised. Judgements were informed by published literature and a more detailed analysis of the Juvenile Dermatomyositis Cohort Biomarker Study and Repository, UK and Ireland. A provisional minimal JDM dataset has been produced, with an associated glossary of definitions. The provisional minimal dataset will request information at time of patient diagnosis and during on-going prospective follow up. At time of patient diagnosis, information will be requested on patient demographics, diagnostic criteria and treatments given prior to diagnosis. During on-going prospective follow-up, variables will include the presence of active muscle or skin disease, major organ involvement or constitutional symptoms, investigations, treatment, physician global assessments and patient reported outcome measures. An internationally agreed minimal dataset has the potential to significantly enhance collaboration, allow effective communication between groups, provide a minimal standard of care and enable analysis of the largest possible number of JDM patients to provide a greater understanding of this disease. This preliminary dataset can now be developed into

  16. A comparative evaluation of the marginal accuracy of crowns fabricated from four commercially available provisional materials: An in vitrostudy

    Directory of Open Access Journals (Sweden)

    Bhavya Mohandas Amin

    2015-01-01

    Full Text Available Purpose: The purpose of this in vitro study was to evaluate and compare the primary marginal accuracy of four commercially available provisional materials (Protemp 4, Luxatemp Star, Visalys Temp and DPI tooth moulding powder and liquid at 2 time intervals (10 and 30 min. Materials and Methods: A customized stainless steel master model containing two interchangeable dies was used for fabrication of provisional crowns. Forty crowns (n = 10 were fabricated, and each crown was evaluated under a stereomicroscope. Vertical marginal discrepancies were noted and compared at 10 min since the start of mixing and then at 30 min. Observations and Results: Protemp 4 showed the least vertical marginal discrepancy (71.59 μ, followed by Luxatemp Star (91.93 μ at 10 min. DPI showed a marginal discrepancy of 95.94 μ while Visalys Temp crowns had vertical marginal discrepancy of 106.81 μ. There was a significant difference in the marginal discrepancy values of Protemp 4 and Visalys Temp. At 30 min, there was a significant difference between the marginal discrepancy of Protemp 4 crowns (83.11 μ and Visalys Temp crowns (128.97 μ and between Protemp 4 and DPI (118.88 μ. No significant differences were observed between Protemp 4 and Luxatemp Star. Conclusion: The vertical marginal discrepancy of temporary crowns fabricated from the four commercially available provisional materials ranged from 71 to 106 μ immediately after fabrication (at 10 min from the start of mix to 83-128 μ (30 min from the start of mix. The time elapsed after mixing had a significant influence on the marginal accuracy of the crowns.

  17. A comparative evaluation of the marginal accuracy of crowns fabricated from four commercially available provisional materials: An in vitro study

    Science.gov (United States)

    Amin, Bhavya Mohandas; Aras, Meena Ajay; Chitre, Vidya

    2015-01-01

    Purpose: The purpose of this in vitro study was to evaluate and compare the primary marginal accuracy of four commercially available provisional materials (Protemp 4, Luxatemp Star, Visalys Temp and DPI tooth moulding powder and liquid) at 2 time intervals (10 and 30 min). Materials and Methods: A customized stainless steel master model containing two interchangeable dies was used for fabrication of provisional crowns. Forty crowns (n = 10) were fabricated, and each crown was evaluated under a stereomicroscope. Vertical marginal discrepancies were noted and compared at 10 min since the start of mixing and then at 30 min. Observations and Results: Protemp 4 showed the least vertical marginal discrepancy (71.59 μ), followed by Luxatemp Star (91.93 μ) at 10 min. DPI showed a marginal discrepancy of 95.94 μ while Visalys Temp crowns had vertical marginal discrepancy of 106.81 μ. There was a significant difference in the marginal discrepancy values of Protemp 4 and Visalys Temp. At 30 min, there was a significant difference between the marginal discrepancy of Protemp 4 crowns (83.11 μ) and Visalys Temp crowns (128.97 μ) and between Protemp 4 and DPI (118.88 μ). No significant differences were observed between Protemp 4 and Luxatemp Star. Conclusion: The vertical marginal discrepancy of temporary crowns fabricated from the four commercially available provisional materials ranged from 71 to 106 μ immediately after fabrication (at 10 min from the start of mix) to 83–128 μ (30 min from the start of mix). The time elapsed after mixing had a significant influence on the marginal accuracy of the crowns. PMID:26097348

  18. [Consensus statement of the National AIDS Plan Secretariat, Spanish Society of Emergency Medicine and AIDS Study Group of the Spanish Society of Infectious Diseases and Clinical Microbiology on Emergency and Human Immunodeficiency Virus Infection].

    Science.gov (United States)

    2013-01-01

    Supporting non-HIV specialist professionals in the treatment of patients with urgent diseases resulting from HIV infection. These recommendations have been agreed by an expert panel from the National AIDS Plan Secretariat, the Spanish Society of Emergency Medicine, and the AIDS Study Group. A review has been made of the safety and efficacy results of clinical trials and cohort studies published in biomedical journals (PubMed and Embase) or presented at conferences. The strength of each recommendation (A, B, C) and the level of supporting evidence (I, II, III) are based on a modification of the criteria of the Infectious Diseases Society of America. The data to be collected from the emergency medical history in order to recognize the patient at risk of HIV infection were specified. It stressed the basic knowledge of ART principles and its importance in terms of decline in morbidity and mortality of HIV+ patients and referring to the HIV specialist for follow-up, where appropriate, including drug interactions. Management of different emergency situations that may occur in patients with HIV infection is also mentioned. The non-HIV specialist professional, will find the necessary tools to approach HIV patients with an emergency disease. Copyright © 2012 Elsevier España, S.L. All rights reserved.

  19. The dual-zone therapeutic concept of managing immediate implant placement and provisional restoration in anterior extraction sockets.

    Science.gov (United States)

    Chu, Stephen J; Salama, Maurice A; Salama, Henry; Garber, David A; Saito, Hanae; Sarnachiaro, Guido O; Tarnow, Dennis P

    2012-01-01

    Improvements in implant designs have helped advance successful immediate anterior implant placement into fresh extraction sockets. Clinical techniques described in this case enable practitioners to achieve predictable esthetic success using a method that limits the amount of buccal contour change of the extraction site ridge and potentially enhances the thickness of the peri-implant soft tissues coronal to the implant-abutment interface. This approach involves atraumatic tooth removal without flap elevation, and placing a bone graft into the residual gap around an immediate fresh-socket anterior implant with a screw-retained provisional restoration acting as a prosthetic socket seal device.

  20. A provisional regulatory gene network for specification of endomesoderm in the sea urchin embryo

    Science.gov (United States)

    Davidson, Eric H.; Rast, Jonathan P.; Oliveri, Paola; Ransick, Andrew; Calestani, Cristina; Yuh, Chiou-Hwa; Minokawa, Takuya; Amore, Gabriele; Hinman, Veronica; Arenas-Mena, Cesar; hide

    2002-01-01

    We present the current form of a provisional DNA sequence-based regulatory gene network that explains in outline how endomesodermal specification in the sea urchin embryo is controlled. The model of the network is in a continuous process of revision and growth as new genes are added and new experimental results become available; see http://www.its.caltech.edu/mirsky/endomeso.htm (End-mes Gene Network Update) for the latest version. The network contains over 40 genes at present, many newly uncovered in the course of this work, and most encoding DNA-binding transcriptional regulatory factors. The architecture of the network was approached initially by construction of a logic model that integrated the extensive experimental evidence now available on endomesoderm specification. The internal linkages between genes in the network have been determined functionally, by measurement of the effects of regulatory perturbations on the expression of all relevant genes in the network. Five kinds of perturbation have been applied: (1) use of morpholino antisense oligonucleotides targeted to many of the key regulatory genes in the network; (2) transformation of other regulatory factors into dominant repressors by construction of Engrailed repressor domain fusions; (3) ectopic expression of given regulatory factors, from genetic expression constructs and from injected mRNAs; (4) blockade of the beta-catenin/Tcf pathway by introduction of mRNA encoding the intracellular domain of cadherin; and (5) blockade of the Notch signaling pathway by introduction of mRNA encoding the extracellular domain of the Notch receptor. The network model predicts the cis-regulatory inputs that link each gene into the network. Therefore, its architecture is testable by cis-regulatory analysis. Strongylocentrotus purpuratus and Lytechinus variegatus genomic BAC recombinants that include a large number of the genes in the network have been sequenced and annotated. Tests of the cis-regulatory predictions of

  1. Comparison of some properties of four provisional restorations resin: Trim, Tempron, Acropars TRII & Duralay (Aria Dent

    Directory of Open Access Journals (Sweden)

    Monzavi A.

    2006-08-01

    Full Text Available Background and Aim: Use of provisional restorations is one of the important phases in the treatment of patients who need fixed prosthesis. Some physical properties are required for these materials. The purpose of this study was the comparison of some physical properties of 4 kinds of resins: Trim, Tempron, Duralay (Aria Dent and Acropars TRII. Materials and Methods: In this experimental study, transverse-strength (TS, setting time (ST, polymerization shrinkage (PS and temperature rise (TR during polymerization were tested. In transverse strength test, 5 samples of each resin were made. TS testing was done with an Instron testing machine. ST testing (5 samples in each group was done with Gilmore needle. In PS test, 11 cylindric samples were prepared from each resin and the shrinkage was examined with digital micrometer (up to 24 hours. In TR test, after mixing the powder and liquid of resins (8 samples in each group, the temperature rise was recorded with 10 seconds interval (up to 15 minutes. Data were analyzed with one-way ANOVA and Tukey HSD tests with p<0.05 as the limit of significance. Results: In TS test, all samples of Trim were bent and no fracture was observed, while Tempron and Duralay showed no significant difference. Both Tempron and Duralay revealed high significant difference with Acropars TRII (P <0.01. In ST test, the difference between groups was significant (P<0.01. The lowest ST was observed in Acropars TRII (7 min, and the highest in Tempron (9.53 min. In PS test, significant difference was observed between Trim and Acropars TRII (P<0.01. PS was completed after 120 min in Tempron and Trim groups. However, PS continued to increase in other groups. In TR test, the difference between groups was significant (P<0.05. Duralay showed the highest TR and the lowest was seen in Trim. Conclusion: In this study, Trim showed better properties than other studied groups. Acropars TRII had the lowest strength. The highest temperature rise

  2. Provisional in-silico biopharmaceutics classification (BCS to guide oral drug product development

    Directory of Open Access Journals (Sweden)

    Wolk O

    2014-09-01

    Full Text Available Omri Wolk, Riad Agbaria, Arik Dahan Department of Clinical Pharmacology, School of Pharmacy, Faculty of Health Sciences, Ben-Gurion University of the Negev, Beer-Sheva, Israel Abstract: The main objective of this work was to investigate in-silico predictions of physicochemical properties, in order to guide oral drug development by provisional biopharmaceutics classification system (BCS. Four in-silico methods were used to estimate LogP: group contribution (CLogP using two different software programs, atom contribution (ALogP, and element contribution (KLogP. The correlations (r2 of CLogP, ALogP and KLogP versus measured LogP data were 0.97, 0.82, and 0.71, respectively. The classification of drugs with reported intestinal permeability in humans was correct for 64.3%–72.4% of the 29 drugs on the dataset, and for 81.82%–90.91% of the 22 drugs that are passively absorbed using the different in-silico algorithms. Similar permeability classification was obtained with the various in-silico methods. The in-silico calculations, along with experimental melting points, were then incorporated into a thermodynamic equation for solubility estimations that largely matched the reference solubility values. It was revealed that the effect of melting point on the solubility is minor compared to the partition coefficient, and an average melting point (162.7°C could replace the experimental values, with similar results. The in-silico methods classified 20.76% (±3.07% as Class 1, 41.51% (±3.32% as Class 2, 30.49% (±4.47% as Class 3, and 6.27% (±4.39% as Class 4. In conclusion, in-silico methods can be used for BCS classification of drugs in early development, from merely their molecular formula and without foreknowledge of their chemical structure, which will allow for the improved selection, engineering, and developability of candidates. These in-silico methods could enhance success rates, reduce costs, and accelerate oral drug products development

  3. Provisional clinical chemistry parameters in the African Sharptooth catfish (Clarias gariepinus

    Directory of Open Access Journals (Sweden)

    J.G. Myburgh

    2008-05-01

    Full Text Available This is a reprint of Myburgh, J.G. Botha, C.J. Booyse, D.G. & Reyers, F., 2008, 'Provisional clinical chemistry parameters in the African Sharptooth catfish (Clarias gariepinus', Journal of the South African Veterinary Association 79(4, 156-160. http://dx.doi.org/10.4102/jsava.v79i4.265:Pollution affects aquatic systems worldwide and there is an urgent need for efficient monitoring. Fish are generally sensitive to their environment and are thus considered to be valuable bioindicator species. The African Sharptooth catfish (Clarias gariepinus is particularly important in this respect because of its very wide distribution. In order to use C. gariepinus as a bioindicator species its baseline clinical chemistry must be defined. Existing data are scarce, and the objective of this work was therefore to establish clinical chemistry parameters for C. gariepinus. Blood was collected from male and female catfish and a number of clinical chemistry parameters were determined. Plasma protein values, but particularly those of plasma albumin, were found to be very low, approximately half the value for dogs, but similar to the values in Channel catfish (Ictalurus punctatus. Plasma urea values in Sharptooth catfish were found to be much lower than in dogs, but only marginally lower than in Channel catfish. Plasma creatinine in Sharptooth catfish, however, was only a quarter of that of dogs and one third of that found in Channel catfish. These findings may have implications for using urea and / or creatinine as an index of renal glomerular filtration, as is done in mammals. Plasma enzyme activity ranges were much lower in Sharptooth catfish than in dogs, particularly for alkaline phosphatase (ALP and alanine aminotransferase (ALT. By comparison, Channel catfish have an even lower ALT activity range but an ALP range that is very similar to dogs. The implications for using these enzymes as markers for liver disease are not clear from these data, as factors such as

  4. Esthetic Outcome of Implant Supported Crowns With and Without Peri-Implant Conditioning Using Provisional Fixed Prosthesis: A Randomized Controlled Clinical Trial.

    Science.gov (United States)

    Furze, David; Byrne, Ashley; Alam, Sonia; Wittneben, Julia-Gabriela

    2016-12-01

    Achieving an optimal esthetic result using dental implants is challenging. Fixed implant-supported provisional crowns are often used to customize the emergence profile and to individualize the surrounding peri-implant soft tissue. The objective of this study is to evaluate whether the use of a provisional implant-supported crown leads to an esthetic benefit on implants that are placed in the esthetic zone. The null hypothesis is that there is no-difference between the two study groups. Twenty single implants (Bone Level, Straumann AG, Basel, Switzerland) were inserted in consecutive patients. After reopening, a randomization process assigned them to either cohort group 1: a provisional phase with soft tissue conditioning using the "dynamic compression technique" or cohort group 2: without a provisional. Implants were finally restored with an all-ceramic crown. Follow-up examinations were performed at 3 and 12 months including implant success and survival, clinical, and radiographic parameters. After 1 year all implants successfully integrated, mean values of combined modPES and WES were 16.7 for group 1 and 10.5 for Group 2. This was statistically significant. Mean bone loss after 1 year was -0.09 and -0.08 for groups 1 and 2, respectively, without being statistically significant. A provisional phase with soft tissue conditioning does improve the final esthetic result. © 2016 Wiley Periodicals, Inc.

  5. TECHNICAL COORDINATION

    CERN Multimedia

    Austin Ball

    2013-01-01

      Since the last report, much visible progress has been made, as the LS1 programme approaches the halfway point. From early October, technical and safety shift-crew have been present around the clock, allowing detectors to stay switched on overnight, ensuring that safety systems are operational and instructions for non-expert shift-crew are clear. LS1 progress Throughout the summer, whilst the solenoid vacuum tank and YB0 surfaces were accessible, an extensive installation programme took place to prepare for Tracker colder operation and the PLT installation, in 2014, the Phase 1 Pixel Tracker installation, in 2016–’17, and the HCAL Phase 1 upgrade completion, ending in LS2. This included pipework for N2 or dry air to flush the Tracker bulkhead region, many sensors to monitor temperature and dew point in the Tracker and its service channels, heating wires outside the Tracker cooling bundles, supports for the new vacuum-jacketed, concentric, CO2 Pixel cooling lines, the PLT cool...

  6. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2012-01-01

      UXC + detectors As explained in detail in the November 2011 bulletin, the bellows unit at −18.5 m from the CMS interaction point was identified as a prime candidate for the regularly occurring pressure spikes which occasionally led to sustained severe background conditions in 2011, affecting dead time and data quality. Similar regions in LHC with vacuum instabilities were observed to be close to bellows, which radiography showed to have distorted RF-fingers — on removal, they proved to have been severely overheated. The plans for the Year-End Technical Stop were adapted to prioritise radiography of the bellows at 16 m to 18 m either end of CMS. Excellent work by the beam pipe, survey and heavy mechanical teams allowed the X-rays to be taken as planned on 20th December, showing that the bellow at −18.5m had an obvious non-conformity. The RF-fingers were found inside the end of the opposing flared pipe instead of outside. In addition, the overlap between fingers and...

  7. 77 FR 42702 - Battat Incorporated, Provisional Acceptance of a Settlement Agreement and Order

    Science.gov (United States)

    2012-07-20

    .... That judgment was supported by technical and design differences from products that experienced large... the Subject Products. 9. On March 31, 2006, the Commission announced the recall of Rose Art Magnetix... intestinal injury.'' 11. Between November 2006 and July 2007, the Commission re- announced the Rose Art...

  8. Effect of Heat Treatment on the Physical Properties of Provisional Crowns during Polymerization: An in Vitro Study

    Directory of Open Access Journals (Sweden)

    May L. Mei

    2015-04-01

    Full Text Available This study concerned the effect of heat treatment during setting on the physical properties of four resin-based provisional restorative materials: Duralay (polymethyl methacrylate, Trim II (polyethyl methacrylate, Luxatemp (bis-acrylic composite, and Protemp 4 (bis-acrylic composite. Specimens were prepared at 23, 37, or 60 °C for evaluation of flexural strength, surface roughness, color change and marginal discrepancy. Flexural strength was determined by a three-point bending test. Surface profile was studied using atomic force microscopy. Color change was evaluated by comparing the color of the materials before and after placement in coffee. A travelling microscope helped prepare standardized crowns for assessment of marginal discrepancy. Flexural strength of all tested materials cured at 23 °C or 37 °C did not significantly change. The surface roughness and marginal discrepancy of the materials increased at 60 °C curing temperature. Marginal discrepancies, color stability, and other physical properties of materials cured at 23 °C or 37 °C did not significantly change. Flexural strength of certain provisional materials cured at 60 °C increased, but there was also an increase in surface roughness and marginal discrepancy.

  9. The effect of dentin desensitizers on thermal changes in the pulp chamber during fabrication of provisional restorations.

    Science.gov (United States)

    Usumez, A; Ozturk, A N; Aykent, F

    2004-06-01

    The purpose of this study was to evaluate the effect of two dentin desensitizers on the pulp chamber temperature increase during fabrication of provisional restorations by a direct method. Sixty intact extracted mandibular third molars were prepared for a metal-ceramic complete crown. Then the teeth were randomly divided into three groups of 20 each. Group 1, no dentin desensitizer was used as the control group; group 2, a resin-based dentin desensitizer was selected; and group 3, the prepared teeth surfaces were coated with polyurethane cyanoacrylate adhesive. Each of the three groups was further divided into two polymerizing systems (autopolymerizing and a photopolymerizing) of 10 each. After insertion of the resin-filled matrix, the temperature change in the pulpal chamber was recorded with thermocouple connected to a data logger. anova indicated no significant differences for all combinations of desensitizing agents and curing methods (P > 0.05). When light cured composite or chemical curing acrylics were used to make temporary crowns, the presence of desensitizing agent did not reduce the temperature transmitted from the provisional material; the residual temperature rise transmitted was of such a magnitude as to cause concern regarding possible thermal injury to pulp.

  10. Immediate occlusal loading in edentulous jaws, CT-guided surgery and fixed provisional prosthesis: a maxillary arch clinical report.

    Science.gov (United States)

    Drago, Carl; del Castillo, Robert; Peterson, Thomas

    2011-04-01

    Immediate occlusal loading (IOL) in edentulous jaws has been reported in numerous publications with implant cumulative survival rates consistent with conventional, unloaded healing protocols. Computed Tomography (CT)-guided surgery has more recently been developed and accepted as an additional treatment modality for maxillary and mandibular implant placement, with or without IOL. Reports as to the accuracy of planned versus actual implant placement in CT-guided surgeries have indicated that CT-guided surgery is not 100% accurate; standard deviations have been reported with values between 1 and 2 mm in terms of actual versus planned placement. The purpose of this article is to review the clinical parameters associated with IOL, and CT-guided surgery in edentulous jaws; and to present a clinical case illustrating the clinical and laboratory phases of treatment. The illustrated treatment was accomplished with an IOL protocol and includes fabrication and placement of a laboratory-processed provisional maxillary prosthesis. This particular protocol had slightly increased costs relative to conventional implant placement; however, the clinicians and patient benefited from improved accuracy of the provisional prostheses and decreased chairtime for the clinical procedures. The benefits and limitations of this treatment protocol are also discussed. © 2010 by The American College of Prosthodontists.

  11. Young novice drivers and the risky behaviours of parents and friends during the provisional (intermediate) licence phase: a brief report.

    Science.gov (United States)

    Scott-Parker, Bridie; Watson, Barry; King, Mark J; Hyde, Melissa K

    2014-08-01

    While there is research indicating that many factors influence the young novice driver's increased risk of road crash injury during the earliest stages of their independent driving, there is a need to further understand the relationship between the perceived risky driving behaviour of parents and friends and the risky behaviour of drivers with a Provisional (intermediate) licence. As part of a larger research project, 378 drivers aged 17-25 years (M=18.22, SD=1.59, 113 males) with a Provisional licence completed an online survey exploring the perceived riskiness of their parents' and friends' driving, and the extent to which they pattern (i.e. base) their driving behaviour on the driving of their parents and friends. Young drivers who reported patterning their driving on their friends, and who reported they perceived their friends to be risky drivers, reported more risky driving. The risky driving behaviour of young male drivers was associated with the perceived riskiness of their fathers' driving, whilst for female drivers the perceived riskiness of their mothers' driving approached significance. The development and application of countermeasures targeting the risky behaviour of same-sex parents appears warranted by the robust research findings. In addition, countermeasures need to encourage young people in general to be non-risky drivers; targeting the negative influence of risky peer groups specifically. Social norms interventions may minimise the influence of potentially-overestimated riskiness. Copyright © 2013 Elsevier Ltd. All rights reserved.

  12. DK mini-culotte stenting in the treatment of true coronary bifurcation lesions: a propensity score matching comparison with T-provisional stenting.

    Science.gov (United States)

    Fan, Lin; Chen, Lianglong; Luo, Yukun; Zhang, Linlin; Zhong, Wenliang; Lin, Chaogui; Chen, Zhaoyang; Peng, Yafei; Zhen, Xingchun; Dong, Xianfeng

    2016-03-01

    The conventional culotte technique remains not to be widely used for the treatment of coronary bifurcation lesions due to its inherent drawbacks. Here, we developed a double kissing mini-culotte stenting (DK mini-culotte) and assessed its efficacy and safety by a propensity score matching comparison (PSM) with T-provisional stenting. From June 2010 to June 2012, a total of 223 consecutive patients with true coronary bifurcation lesions (TCBLs) were treated with DK mini-culotte (91 patients with 92 lesions) or T-provisional stenting (132 patients with 135 lesions). We performed a PSM to correct the confounders from clinical and lesion's characteristics. The primary endpoint was cumulative major adverse cardiac event (MACE) at 1 year including cardiac death, myocardial infarction, and target vessel revascularization or target lesion revascularization (TVR/TLR). The secondary endpoint was the rate of side branch (SB) restenosis at 12 months. After a PSM, there were 66 patients in each group. Additional SB stenting in the T-provisional group was performed in 10 (15.2 %) lesions. The incidence of 1-year cumulative MACE was 4.55 % for the DK mini-culotte versus 13.6 % for T-provisional stenting (P = 0.127), the rate of TVR/TLR was 1.52 % for DK mini-culotte versus 12.12 % for T-provisional stenting (P = 0.033). The SB binary restenosis rate was 5.6 % in the DK mini-culotte group and 22.4 % in the T-provisional group (P = 0.014). In summary, despite that there is no difference in MACE between groups, DK mini-culotte significantly reduce TVR/TLR and SB restenosis in the treatment of true coronary bifurcation lesions.

  13. Processo decisório e práticas de gestão: dirigindo a Secretaria da Saúde do Estado da Bahia, Brasil Decision-making process and administrative practice: managing the State Health Secretariat in Bahia, Brazil

    Directory of Open Access Journals (Sweden)

    Thereza Christina Bahia Coelho

    2005-10-01

    Full Text Available Um estudo de caso da Secretaria da Saúde do Estado da Bahia, Brasil, identificou e analisou as práticas de gestão durante a implantação de uma reforma administrativa. A formação da "agenda" institucional apresentou indícios de pouca participação da sociedade civil e do nível técnico-operacional na seleção e priorização de problemas, resultante de um processo decisório pressionado por instâncias do alto staff do Executivo. As decisões relativas aos produtos finais (output - projetos, serviços e ações correm por conta dos níveis subordinados, sendo pouco problematizadas na rotina institucional. A preocupação com os insumos (input - recursos humanos e financeiros ocupam grande parte do tempo dos dirigentes em negociações internas e compromissos externos para assegurá-los. Já os resultados (outcome em relação à situação de saúde representam o "sujeito oculto" do discurso institucional. A informação surge nas disputas institucionais como "recurso de poder" técnico nas suas dimensões médica, epidemiológica, sanitária ou administrativa. A questão da "representação" de governo e dos interesses aliados se apóia em disposições ideológicas e práticas autoritárias, contradizendo a necessidade de transparência e modernização gerencial.This case study is based on research performed by the Bahia State Health Secretariat (SESAB, aimed at analyzing management practices during the implementation of a State government administrative reform. The institutional agenda shows evidence of limited participation by civil society and technical and operational staff in problem selection and prioritization, resulting from a work process pressured by high-level executive government staff. Decisions regarding "output" (projects, services, and activities were made under the responsibility of subordinate operational levels and did not appear as issues in the institutional routine. Concerns related to "input" (financial and

  14. Prospective evaluation of a new protocol for the provisional use of perfusion imaging with exercise stress testing

    Energy Technology Data Exchange (ETDEWEB)

    Duvall, W.L. [Hartford Hospital, Division of Cardiology (Henry Low Heart Center), Hartford, CT (United States); Mount Sinai Medical Center, Division of Cardiology (Mount Sinai Heart), New York, NY (United States); Savino, John A.; Levine, Elliot J.; Croft, Lori B.; Henzlova, Milena J. [Mount Sinai Medical Center, Division of Cardiology (Mount Sinai Heart), New York, NY (United States); Hermann, Luke K. [Mount Sinai Medical Center, Department of Emergency Medicine, New York, NY (United States)

    2014-11-04

    Previous literature suggests that myocardial perfusion imaging (MPI) adds little to the prognosis of patients who exercise >10 metabolic equivalents (METs) during stress testing. With this in mind, we prospectively tested a provisional injection protocol in emergency department (ED) patients presenting for the evaluation of chest pain in which a patient would not receive an injection of radioisotope if adequate exercise was achieved without symptoms and a negative ECG response. All patients who presented to the ED over a 5-year period who were referred for stress testing as part of their ED evaluation were included. Patients considered for a provisional protocol were: exercise stress, age <65 years, no known coronary artery disease, and an interpretable rest ECG. Criteria for not injecting included a maximal predicted heart rate ≥85 %, ≥10 METs of exercise, no anginal symptoms during stress, and no ECG changes. Groups were compared based on stress test results, all-cause and cardiac mortality, follow-up cardiac testing, subsequent revascularization, and cost. A total of 965 patients were eligible with 192 undergoing exercise-only and 773 having perfusion imaging. After 41.6 ± 19.6 months of follow-up, all-cause mortality was similar in the exercise-only versus the exercise plus imaging group (2.6 % vs. 2.1 %, p = 0.59). There were no cardiac deaths in the exercise-only group. At 1 year there was no difference in the number of repeat functional stress tests (1.6 % vs. 2.1 %, p = 0.43), fewer angiograms (0 % vs. 4.0 %, p = 0.002), and a significantly lower cost (65 ± 332 vs 506 ± 1,991, p = 0.002; values are in US dollars) in the exercise-only group. The radiation exposure in the exercise plus imaging group was 8.4 ± 2.1 mSv. A provisional injection protocol has a very low mortality, few follow-up diagnostic tests, and lower cost compared to standard imaging protocols. If adopted it would decrease radiation exposure, save time and decrease health-care costs

  15. Conversion of a complete denture to a provisional implant-supported, screw-retained fixed prosthesis for immediate loading of a completely edentulous arch.

    Science.gov (United States)

    Kammeyer, Greg; Proussaefs, Periklis; Lozada, Jaime

    2002-05-01

    This article describes the fabrication of a provisional implant-supported, screw-retained restoration for immediate loading of a completely edentulous arch. The technique can be applied to patients with partially edentulous arches as well. Until immediate loading of dental implants becomes a well-documented treatment modality, the described method should not be applied on a routine basis or without careful evaluation.

  16. Immediate placement and provisionalization of maxillary anterior single implant with guided bone regeneration, connective tissue graft, and coronally positioned flap procedures.

    Science.gov (United States)

    Waki, Tomonori; Kan, Joseph Y K

    2016-01-01

    Immediate implant placement and provisionalization in the esthetic zone have been documented with success. The benefit of immediate implant placement and provisionalization is the preservation of papillary mucosa. However, in cases with osseous defects presenting on the facial bony plate, immediate implant placement procedures have resulted in facial gingival recession. Subepithelial connective tissue grafts for immediate implant placement and provisionalization procedures have been reported with a good esthetic outcome. Biotype conversion around implants with subepithelial connective tissue grafts have been advocated, and the resulting tissues appear to be more resistant to recession. The dimensions of peri-implant mucosa in a thick biotype were significantly greater than in a thin biotype. Connective tissue graft with coronally positioned flap procedures on natural teeth has also been documented with success. This article describes a technique combining immediate implant placement, provisionalization, guided bone regeneration (GBR), connective tissue graft, and a coronally positioned flap in order to achieve more stable peri-implant tissue in facial osseous defect situations.

  17. Documentation to the NCES Common Core of Data Public Elementary/Secondary School Universe Survey: School Year 2011-12. Provisional Version 1a. NCES 2014-100

    Science.gov (United States)

    Keaton, Patrick

    2013-01-01

    The documentation for this provisional version 1a file of the National Center for Education Statistics' (NCES) Common Core of Data (CCD) Public Elementary/Secondary School Universe Survey for SY 2011-12, contains a brief description of the data collection, along with information required to understand and access the data file. The SY 2011-12…

  18. Documentation to the NCES Common Core of Data Local Education Agency Universe Survey: School Year 2011-12. Provisional Version 1a. NCES 2014-035

    Science.gov (United States)

    Keaton, Patrick

    2014-01-01

    This documentation is for the provisional version 1a file of the National Center for Education Statistics' (NCES) Common Core of Data (CCD) Local Education Agency (LEA) Universe Survey for SY 2011-12. It contains a brief description of the data collection, along with information required to understand and access the data file. The CCD is a…

  19. La protección cautelar en el contencioso administrativo colombiano: hacia un modelo de justicia provisional

    Directory of Open Access Journals (Sweden)

    Daniel Castaño Parra

    2010-12-01

    Full Text Available Siguiendo de cerca las elaboraciones teóricas que se han gestado en otras latitudes para justificar la tutela cautelar como una modalidad de justicia provisional en razón del estrecho vínculo que existe entre ésta y la tutela judicial efectiva, se intentará extrapolar dicho razonamiento al derecho positivo colombiano para caracterizar a la protección cautelar como una auténtica concreción del derecho a la justicia consagrado en los artículos 8.1 y 25 de la Convención Americana sobre Derechos Humanos, y en los artículos 29 y 229 de la Carta Política de 1991.

  20. The effect of placement of glass fibers and aramid fibers on the fracture resistance of provisional restorative materials.

    Science.gov (United States)

    Saygili, Gülbin; Sahmali, Sevil M; Demirel, Figen

    2003-01-01

    The fracture resistance of provisional restorations is an important concern for the restorative dentist. The fracture resistance of a material is directly related to its transverse strength. Six specimens of similar dimensions were prepared from three resins (PMMA, PEMA and BIS acryl-composite). The resins were reinforced with glass and aramid fibers. The samples were tested immediately after the material set, following seven days of wet storage using three-point compression loading. The results were analyzed with an analysis of variance (ANOVA). Fracture resistance of the specimens was statistically different (p fibers showed higher transverse strength (149.82 MPa). The fiber reinforcement of resin materials increased the strength values (20-50%). Within the limitations of this study, the transverse strengths of PMMA, PEMA and BIS acryl-resin composites were improved after reinforcement with glass and aramid fibers.

  1. Immediate loading of definitive implants in the edentulous mandible using a fixed provisional prosthesis: The denture conversion technique.

    Science.gov (United States)

    Misch, Craig M

    2004-09-01

    This article presents a clinical technique for immediate implant loading in the completely edentulous mandible. The protocol recommends the placement of 4 to 5 root-form implants in the anterior mandible between the mental foramina. Upon insertion the implants must have favorable primary stability. Abutments are added to the implants and the patient's lower denture is converted into an immediate load provisional fixed prosthesis. The denture conversion technique has been shown to provide predictable results for immediate implant loading in the edentulous mandible. The final prosthesis is fabricated upon integration of the implants in 3 months. The denture conversion technique offers several advantages because it may be used with most commercially available implant systems and it incorporates conventional implant components. Guidelines for patient selection, presurgical preparation, implant surgery, prosthesis fabrication, and postoperative care are reviewed.

  2. Clinical outcomes following bioresorbable scaffold implantation for bifurcation lesions: Overall outcomes and comparison between provisional and planned double stenting strategy.

    Science.gov (United States)

    Kawamoto, Hiroyoshi; Latib, Azeem; Ruparelia, Neil; Miyazaki, Tadashi; Sticchi, Alessandro; Naganuma, Toru; Sato, Katsumasa; Figini, Filippo; Chieffo, Alaide; Carlino, Mauro; Montorfano, Matteo; Colombo, Antonio

    2015-10-01

    The aim of this study was to investigate clinical outcomes of patients treated with a provisional stenting (PS) versus a double stenting (DS) strategy for coronary bifurcation lesions with bioresorbable scaffolds (BRS). There are limited data available with regards to outcomes following BRS implantation for bifurcation lesions. A total of 132 bifurcation lesions treated with BRS between 2012 and 2014 were analyzed. Of the total of 132 bifurcation lesions, 10 lesions were treated without crossover stenting. 99 lesions (81%) were treated with a PS strategy and 23 lesions (19%) with a DS strategy. The DS group consisted of patients with a greater number of true bifurcation lesions (PS 52.0% vs. DS 91.3%: P strategy was employed. Larger studies are eagerly awaited to determine longer-term follow-up of this treatment strategy. © 2015 Wiley Periodicals, Inc.

  3. The Paediatric Rheumatology International Trials Organisation provisional criteria for the evaluation of response to therapy in juvenile dermatomyositis.

    Science.gov (United States)

    Ruperto, Nicolino; Pistorio, Angela; Ravelli, Angelo; Rider, Lisa G; Pilkington, Clarissa; Oliveira, Sheila; Wulffraat, Nico; Espada, Graciela; Garay, Stella; Cuttica, Ruben; Hofer, Michael; Quartier, Pierre; Melo-Gomes, Jose; Reed, Ann M; Wierzbowska, Malgorzata; Feldman, Brian M; Harjacek, Miroslav; Huppertz, Hans-Iko; Nielsen, Susan; Flato, Berit; Lahdenne, Pekka; Michels, Harmut; Murray, Kevin J; Punaro, Lynn; Rennebohm, Robert; Russo, Ricardo; Balogh, Zsolt; Rooney, Madeleine; Pachman, Lauren M; Wallace, Carol; Hashkes, Philip; Lovell, Daniel J; Giannini, Edward H; Gare, Boel Andersson; Martini, Alberto

    2010-11-01

    To develop a provisional definition for the evaluation of response to therapy in juvenile dermatomyositis (DM) based on the Paediatric Rheumatology International Trials Organisation juvenile DM core set of variables. Thirty-seven experienced pediatric rheumatologists from 27 countries achieved consensus on 128 difficult patient profiles as clinically improved or not improved using a stepwise approach (patient's rating, statistical analysis, definition selection). Using the physicians' consensus ratings as the "gold standard measure," chi-square, sensitivity, specificity, false-positive and-negative rates, area under the receiver operating characteristic curve, and kappa agreement for candidate definitions of improvement were calculated. Definitions with kappa values >0.8 were multiplied by the face validity score to select the top definitions. The top definition of improvement was at least 20% improvement from baseline in 3 of 6 core set variables with no more than 1 of the remaining worsening by more than 30%, which cannot be muscle strength. The second-highest scoring definition was at least 20% improvement from baseline in 3 of 6 core set variables with no more than 2 of the remaining worsening by more than 25%, which cannot be muscle strength (definition P1 selected by the International Myositis Assessment and Clinical Studies group). The third is similar to the second with the maximum amount of worsening set to 30%. This indicates convergent validity of the process. We propose a provisional data-driven definition of improvement that reflects well the consensus rating of experienced clinicians, which incorporates clinically meaningful change in core set variables in a composite end point for the evaluation of global response to therapy in juvenile DM. Copyright © 2010 by the American College of Rheumatology.

  4. Fracture strength and failure mode of maxillary implant-supported provisional single crowns: a comparison of composite resin crowns fabricated directly over PEEK abutments and solid titanium abutments.

    Science.gov (United States)

    Santing, Hendrik Jacob; Meijer, Henny J A; Raghoebar, Gerry M; Özcan, Mutlu

    2012-12-01

    Polyetheretherketone (PEEK) temporary abutments have been recently introduced for making implant-supported provisional single crowns. Little information is available in the dental literature on the durability of provisional implant-supported restorations. The objectives of this study were to evaluate the fracture strength of implant-supported composite resin crowns on PEEK and solid titanium temporary abutments, and to analyze the failure types. Three types of provisional abutments, RN synOcta Temporary Meso Abutment (PEEK; Straumann), RN synOcta Titanium Post for Temporary Restorations (Straumann), and Temporary Abutment Engaging NobRplRP (Nobel Biocare) were used, and provisional screw-retained crowns using composite resin (Solidex) were fabricated for four different locations in the maxilla. The specimens were tested in a universal testing machine at a crosshead speed of 1 mm/minute until fracture occurred. The failure types were analyzed and further categorized as irreparable (Type 1) or reparable (Type 2). No significant difference was found between different abutment types. Only for the position of the maxillary central incisor, composite resin crowns on PEEK temporary abutments showed significantly lower (p resin crowns (75 out of 104), followed by screw loosening (18 out of 104). According to reparability, the majority of the specimens were classified as Type 1 (82 out of 104). Type 2 failures were not often observed (22 out of 104). Provisional crowns on PEEK abutments showed similar fracture strength as titanium temporary abutments except for central incisors. Maxillary right central incisor composite resin crowns on PEEK temporary abutments fractured below the mean anterior masticatory loading forces reported to be approximately 206 N. © 2010 Wiley Periodicals, Inc.

  5. Teaching Technical Writing - Towards Technical Writing

    DEFF Research Database (Denmark)

    Kastberg, Peter

    2000-01-01

    In this paper I will present key aspects of the curriculum for the university degree in technical translation that I have designed for and subsequently implemented at the German Department of the Aarhus School of Business, Denmark. My starting point will be a critical discussion of the norm that ...... of technical writing....

  6. Technical Report Writing Today

    DEFF Research Database (Denmark)

    Riordan, Daniel G.

    2014-01-01

    Section 1: Technical Communication Basics (8 chapters on tech com, audiences, tech com process, tech com style, researching, designing pages, using visual aids, describing). Section 2: Technical Communication Applications (7 chapters on sets of instructions, informal reports and email, developing...

  7. Technical training: places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  8. Technical training: places available

    CERN Document Server

    2014-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  9. Technical training - places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  10. Technical training: places available

    CERN Multimedia

    2014-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Marie Lahchimi, Technical Training Administration (Tel: 74924)

  11. Technical training: places available

    CERN Document Server

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tél : 74924)  

  12. 2013 Technical Roundtable

    Science.gov (United States)

    On December 9, 2013, EPA reconvened the study’s Technical Roundtable. Subject-matter experts discussed the outcomes of the 2013 Technical Workshops, stakeholder engagement, and plans for draft assessment report.

  13. 76 FR 64083 - Reliability Technical Conference; Notice of Technical Conference

    Science.gov (United States)

    2011-10-17

    ... Energy Regulatory Commission Reliability Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, November 29... addressing risks to reliability that were identified in earlier Commission technical conferences. The...

  14. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Introduction to the CERN EDMS : 22.6.2004 (1 day) The CERN EDMS for local administrators : 23 & 24.6.2004 (2 days) Compatibilité électromagnétique (CEM) - Introduction / Electromagnetic Compatibility (EMC) - Introduction: 7.7.2004 (morning) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.9.2004 (4 jours) Programmation STEP...

  15. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Outlook (short course I) : E-mail : 31.8.2004 (2 hours, morning) Introduction à Outlook : Outlook (short course II) : Calendar, Tasks and Notes : 31.8.2004 (2 hours, afternoon) Instructor-led WBTechT Study or Follow-up for Microsoft Applications : 7.9.2004 (morning) Outlook (short course III) : Meetings and Delegation : 7.9.2004 (2 hours, afternoon) Introduction au VHDL et utilisation du simulateur ...

  16. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Joint PVSS JCOP Framework : 9 - 13.8.2004 (5 days) Introduction à Outlook : 19.8.2004 (1 jour) Outlook (Short Course I): E-mail: 31.8.2004 (2 hours, morning) Outlook (Short Course II): Calendar, Tasks and Notes: 31.8.2004 (2 hours, afternoon) Instructor-led WBTechT Study or Follow-up for Microsoft Applications: 7.9.2004 (morning) Outlook (Short Course III): Meetings and Delegation: 7.9.2004 (2 hours, afternoon) I...

  17. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Joint PVSS JCOP Framework : 9 - 13.8.2004 (5 days) Introduction à Outlook : 19.8.2004 (1 jour) Outlook (Short Course I): E-mail: 31.8.2004 (2 hours, morning) Outlook (Short Course II): Calendar, Tasks and Notes: 31.8.2004 (2 hours, afternoon) Hands-on Introduction to Python Programming: 1 - 3.9.2004 (3 days - free course) Instructor-led WBTechT Study or Follow-up for Microsoft Applications: 7.9.20...

  18. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Oracle 9i : New features for developers : 14 - 16.6.2004 (3 days) The Joint PVSS JCOP Framework: 14 - 18.6.2004 (5 days) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 15 & 16.6.2004 (2 jours) EXCEL 2003 - niveau 2 : 17 & 18.6.2004 (2 jours) MAGNE-04 : Magnétisme pour l'électrotechnique : 6 au 8.7.2004 (3 jours) AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.09.2004 (4 jours) ENSEIGNEMEN...

  19. pH-Dependent solubility and permeability criteria for provisional biopharmaceutics classification (BCS and BDDCS) in early drug discovery.

    Science.gov (United States)

    Varma, Manthena V; Gardner, Iain; Steyn, Stefanus J; Nkansah, Paul; Rotter, Charles J; Whitney-Pickett, Carrie; Zhang, Hui; Di, Li; Cram, Michael; Fenner, Katherine S; El-Kattan, Ayman F

    2012-05-07

    The Biopharmaceutics Classification System (BCS) is a scientific framework that provides a basis for predicting the oral absorption of drugs. These concepts have been extended in the Biopharmaceutics Drug Disposition Classification System (BDDCS) to explain the potential mechanism of drug clearance and understand the effects of uptake and efflux transporters on absorption, distribution, metabolism, and elimination. The objective of present work is to establish criteria for provisional biopharmaceutics classification using pH-dependent passive permeability and aqueous solubility data generated from high throughput screening methodologies in drug discovery settings. The apparent permeability across monolayers of clonal cell line of Madin-Darby canine kidney cells, selected for low endogenous efflux transporter expression, was measured for a set of 105 drugs, with known BCS and BDDCS class. The permeability at apical pH 6.5 for acidic drugs and at pH 7.4 for nonacidic drugs showed a good correlation with the fraction absorbed in human (Fa). Receiver operating characteristic (ROC) curve analysis was utilized to define the permeability class boundary. At permeability ≥ 5 × 10(-6) cm/s, the accuracy of predicting Fa of ≥ 0.90 was 87%. Also, this cutoff showed more than 80% sensitivity and specificity in predicting the literature permeability classes (BCS), and the metabolism classes (BDDCS). The equilibrium solubility of a subset of 49 drugs was measured in pH 1.2 medium, pH 6.5 phosphate buffer, and in FaSSIF medium (pH 6.5). Although dose was not considered, good concordance of the measured solubility with BCS and BDDCS solubility class was achieved, when solubility at pH 1.2 was used for acidic compounds and FaSSIF solubility was used for basic, neutral, and zwitterionic compounds. Using a cutoff of 200 μg/mL, the data set suggested a 93% sensitivity and 86% specificity in predicting both the BCS and BDDCS solubility classes. In conclusion, this study identified

  20. In vitro evaluation of the flexural properties of All-on-Four provisional fixed denture base resin partially reinforced with fibers.

    Science.gov (United States)

    Li, Bei Bei; Xu, Jia Bin; Cui, Hong Yan; Lin, Ye; Di, Ping

    2016-01-01

    The aim of this study was to assess the effects of partial carbon or glass fiber reinforcement on the flexural properties of All-on-Four provisional fixed denture base resin. The carbon or glass fibers were woven (3% by weight) together in three strands and twisted and tightened between the two abutments in a figure-of-"8" pattern. Four types of specimens were fabricated for the three-point loading test. The interface between the denture base resin and fibers was examined using scanning electron microscopy (SEM). Reinforcement with carbon or glass fibers between two abutments significantly increased the flexural strength and flexural modulus. SEM revealed relatively continuous contact between the fibers and acrylic resin. The addition of carbon or glass fibers between two abutments placed on All-on-Four provisional fixed denture base resin may be clinically effective in preventing All-on-Four denture fracture and can provide several advantages for clinical use.

  1. Comparison of temperature rise in pulp chamber during polymerization of materials used for direct fabrication of provisional restorations: An in-vitro study.

    Science.gov (United States)

    Khajuria, Rajat R; Madan, Ravi; Agarwal, Swatantra; Gupta, Reecha; Vadavadgi, Sunil V; Sharma, Vikas

    2015-01-01

    The purpose is to compare temperature rise in the pulp chamber during fabrication of provisional crowns using different materials and on different types of teeth using direct technique. An extracted, sound, caries free maxillary central incisor and a mandibular molar were selected for the study and crown preparations of all ceramic and all metal were done on central incisor and mandibular molar, respectively. Materials tested were DPI tooth molding self-curing material and protemp-4. Addition silicone putty was used as a matrix and 80 provisional crowns were fabricated, of which 40 were on central incisor and 40 on mandibular molar. Depending on the type of material used, they were further divided into two subgroups: Each comprising 20 provisional crowns. Temperature readings were recorded using K type of thermocouple with 0.1°C precision digital thermometer. Analysis of variance, Tukey honest significant difference and Kruskall-Wallis H-test. Statistically significant difference exists between two materials tested on the basis of peak temperature achieved and time taken by a particular material to reach peak temperature. Peak temperature achieved was highest for provisional crowns with DPI tooth molding self-curing material on maxillary central incisor (40.39 + 0.46), followed by DPI tooth molding self-curing material on mandibular molar (40.03 + 0.32), protemp-4 on maxillary central incisor (39.46 + 0.26) and least with protemp-4 on mandibular molar (39.09 + 0.33). The time taken to reach peak temperature was almost double in DPI tooth molding self-curing material (5 min) than in protemp-4. Polymethyl methacrylate resin produced higher intra-pulpal rise when compared to newer generation bis-acrylic composite.

  2. The effects of desensitizing resin, resin sealing, and provisional cement on the bond strength of dentin luted with self-adhesive and conventional resincements.

    Science.gov (United States)

    Sailer, Irena; Oendra, Andrea E Hernandez; Stawarczyk, Bogna; Hämmerle, Christoph H F

    2012-04-01

    Self-adhesive resin cements were designed to bond without any pretreatment of dentin. However, pretreatments such as the application of desensitizing resin or the resin sealing of dentin with priming/bonding solutions might influence the bonding quality of these self-adhesive resin cements. Little is known about the effect of dentin pretreatment on the bond quality of self-adhesive resin cements. This study evaluated whether dentin desensitizing or sealing methods influenced the shear bond strength of 1 self-adhesive and 2 conventional resin cements. One-hundred and eighty human molars were assigned to 5 different pretreatment groups: 1) freshly ground dentin, 2) glutaraldehyde/hydroxyethylmethacrylate (HEMA) desensitized dentin (Gluma), 3) contamination of desensitized dentin with provisional cement, 4) sealed dentin (dual bonding technique), and 5) contamination of sealed dentin with provisional cement. The shear bond strength of a self-adhesive resin cement (RelyX Unicem; RXU) and 2 conventional resin cements (Variolink II; VAR, Panavia 21; PAN) was assessed for each pretreatment group (n=12 per cement types). Two-way ANOVA and 1-way ANOVA together with the post hoc Tukey multiple comparison (α=.05) were performed. On freshly ground dentin, PAN exhibited the highest shear bond strength values (Pdentin (Pdentin increased the bond strength of RXU but had no significant effect on VAR or PAN. RXU exhibited the highest mean bond strength after the contamination of resin-sealed dentin by provisional cement. Glutaraldehyde/HEMA treatment and resin sealing of dentin have a beneficial effect on the shear bond strength of self-adhesive resin cement (RXU). Contamination of dentin with provisional cement has no influence on the bond strength of the self-adhesive resin cement (RXU) or VAR but lowered the bond strength of PAN. Copyright © 2012 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

  3. Estudio descriptivo de la utilización de los espacios deportivos municipales: perspectiva en el uso de un sistema provisional de indicadores.

    OpenAIRE

    Cuenca Ereú, Federico Ignacio

    2016-01-01

    Este estudio consiste en el desarrollo de un sistema provisional de indicadores que permita la descripción de aspectos evaluativos en relación al uso de instalaciones deportivas. Para su elaboración se han tenido en cuenta los datos suministrados por el Departamento de Deportes del Ayuntamiento de Vitoria-Gasteiz en relación a sus instalaciones de tenis y pádel.

  4. Effects of surface treatment and artificial aging on the shear bond strength of orthodontic brackets bonded to four different provisional restorations.

    Science.gov (United States)

    Al Jabbari, Youssef S; Al Taweel, Sara M; Al Rifaiy, Mohammed; Alqahtani, Mohammed Q; Koutsoukis, Theodoros; Zinelis, Spiros

    2014-07-01

    To evaluate the combined effects of material type, surface treatment, and thermocycling on the bond strength of orthodontic brackets to materials used for the fabrication of provisional crowns. Four materials were included in this study (ProTemp, Trim Plus, Trim II, and Superpont C+B). Sixty cylindrical specimens (1 × 3 cm) were prepared from each material and equally divided into three groups. The first group was ground with silica carbide paper, the second was polished with pumice, and the last group was sandblasted with 50-µm aluminum oxide particles. Stainless-steel maxillary central incisor brackets (Victory Series, 3M) were bonded to the provisional material specimens with Transbond XT light-cured composite resin, and half of the specimens from each group were thermocycled 500 times in 5°C and 55°C water baths. Then the brackets were debonded with shear testing, and the results were statistically analyzed by three-way analysis of variance and Tukey's multiple-comparison tests at α  =  0.05. Adhesive Remnant Index (ARI) was also identified. Before and after thermocycling, ProTemp materials showed the highest shear bond strength with orthodontic brackets (10.3 and 13.1 MPa, respectively). The statistical analysis indicated an interaction among the three independent variables (P < .05) and statistically significant differences in bond strength among provisional materials (P < .001), surface treatments (P < .001), and thermocycling (P < .05). According to the ARI, most groups demonstrated adhesive failure. The provisional material type, surface treatment, and artificial aging have a significant effect on bond strength. Sandblasting treatment exerts a beneficial effect on shear bond strength.

  5. Provisional Tic Disorder: What to tell parents when their child first starts ticcing [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Kevin J Black

    2016-04-01

    Full Text Available The child with recent onset of tics is a common patient in a pediatrics or child neurology practice. If the child’s first tic was less than a year in the past, the diagnosis is usually Provisional Tic Disorder (PTD. Published reviews by experts reveal substantial consensus on prognosis in this situation: the tics will almost always disappear in a few months, having remained mild while they lasted. Surprisingly, however, the sparse existing data may not support these opinions. PTD may have just as much importance for science as for clinical care. It provides an opportunity to prospectively observe the spontaneous remission of tics. Such prospective studies may aid identification of genes or biomarkers specifically associated with remission rather than onset of tics. A better understanding of tic remission may also suggest novel treatment strategies for Tourette syndrome, or may lead to secondary prevention of tic disorders. This review summarizes the limited existing data on the epidemiology, phenomenology, and outcome of PTD, highlights areas in which prospective study is sorely needed, and proposes that tic disorders may completely remit much less often than is generally believed.

  6. Evaluation of the flexural strength and microhardness of provisional crown and bridge materials fabricated by different methods.

    Science.gov (United States)

    Digholkar, Shruti; Madhav, V N V; Palaskar, Jayant

    2016-01-01

    The purpose of this study was to evaluate and compare the flexural strength and microhardness of provisional restorative materials fabricated utilizing rapid prototyping (RP), Computer Assisted Designing and Computer Assisted Milling (CAD-CAM) and conventional method. Twenty specimens of dimensions 25 mm × 2 mm × 2 mm (ADA-ANSI specification #27) were fabricated each using: (1) Three dimensional (3D) printed light-cured micro-hybrid filled composite by RP resin group, (2) a milled polymethyl methacrylate (CH) using CAD-CAM (CC resin group), and (3) a conventionally fabricated heat activated polymerized CH resin group. Flexural strength and microhardness were measured and values obtained were evaluated. The measured mean flexural strength values (MegaPascals) were 79.54 (RP resin group), 104.20 (CC resin group), and 95.58 (CH resin group). The measured mean microhardness values (Knoop hardness number) were 32.77 (RP resin group), 25.33 (CC resin group), and 27.36 (CH resin group). The analysis of variance (ANOVA) test shows that there is statistically significant difference in the flexural strength values of the three groups (P microhardness values of the three groups was statistically significant according to ANOVA as well as the intergroup comparison done using the Tukey's HSD (post hoc) test (P microhardness.

  7. Optimizing anterior esthetics of a single-tooth implant through socket augmentation and immediate provisionalization: A case report with 7-year follow-up

    Directory of Open Access Journals (Sweden)

    Po-Sung Fu

    2012-10-01

    Full Text Available Tooth extraction inevitably accompanies alveolar ridge resorption with loss of pre-existing tissue morphology. Replacing missing teeth with dental implants has become popular, but restoring anterior teeth with implant-supported restorations is a technique-sensitive task and poses challenges for dentists. With the progress of implant dentistry, the demand for optimal esthetics has become linked with the desire for faster, easier techniques that shorten treatment time and also satisfy patients. Immediate provisionalization of a single-tooth implant provides significant benefits compared with traditional delayed protocols, such as aiding the contouring of peri-implant soft tissue and enhancing patient comfort and satisfaction. This article describes a meticulous approach to a hopeless maxillary central incisor with root fracture. The defect in the extraction socket was reconstructed using autogenous bone harvested from the chin. Four months later, an implant was installed and immediately restored. After another healing period of 6 months, the peri-implant soft tissue had been shaped and matured according to the contours of the provisional restoration. The emergence profile was used to duplicate the definitive restoration. Peri-implant esthetics was achieved through socket augmentation and immediate provisionalization of the implant. This treatment modality attained predictable and maintainable outcomes, both functionally and esthetically.

  8. Instalación inmediata de prótesis provisionales en la reapertura de implantes Immediate instalation of provisional protheses in implant reopening

    Directory of Open Access Journals (Sweden)

    Alejandro Munõz Chávez

    2007-03-01

    Full Text Available El estudio de las técnicas para alcamzar una estética en el seguimiento anterior cuando se utilizan implantes osteointegrados es de gran importancia. Se realizó una revisión de la literatura con el objetivo de comparar la eficiencia y conveniencia de la instalación de prótesis provisionales inmediatamente en la reapertura de los implantes osteointegrados en relación con el tiempo establecido (uso de cicatrizadores estandarizados y cicatrizadores con perfil de emergencia arbitrado. La prótesis provisional inmediata en la fase de reapertura propicia la restauración del contorno de la encía más rápidamente cuando se compara con el uso de cicatrizadores sin necesidad de fases intermediarias.The study of techniques to reach aesthetics in the anterior region when using osseointegrated implants is of great importance. A literature review was made to compare effivciency and suitability of immediate provisionalization in re-opening of osseointegrated implants with respect to the set time (use of standardized cicatrizants and emergency profile cicatrizants. Immediate provisional denture in the phase of re-opening makes the restoration of the gingival contourn quicker when compared to the use of cicatrizants without intermediate phases required.

  9. Assessing neurosurgical non-technical skills: an exploratory study of a new behavioural marker system.

    Science.gov (United States)

    Michinov, Estelle; Jamet, Eric; Dodeler, Virginie; Haegelen, Claire; Jannin, Pierre

    2014-10-01

    The management of non-technical skills is a major factor affecting teamwork quality and patient safety. This article presents a behavioural marker system for assessing neurosurgical non-technical skills (BMS-NNTS). We tested the BMS during deep brain stimulation surgery. We developed the BMS in three stages. First, we drew up a provisional assessment tool based on the literature and observation tools developed for other surgical specialties. We then analysed videos made in an operating room (OR) during deep brain stimulation operations in order to ensure there were no significant omissions from the skills list. Finally, we used five videos of operations to identify the behavioural markers of non-technical skills in verbal communications. Analyses of more than six hours of observations revealed 3515 behaviours from which we determined the neurosurgeon's non-technical skills behaviour pattern. The neurosurgeon frequently engaged in explicit coordination, situation awareness and leadership behaviours. In addition, the neurosurgeon's behaviours differed according to the stage of the operation and the OR staff members with whom she was communicating. Our behavioural marker system provides a structured approach to assessing non-technical skills in the field of neurosurgery. It can also be transferred to other surgical specialties and used in surgeon training curricula. © 2014 John Wiley & Sons, Ltd.

  10. Hacia un inventario provisional de las tendencias en Bibliotecología y Ciencia de la Información = Towards a provisional inventory of trends in Library and Information Science.

    Directory of Open Access Journals (Sweden)

    Alejandro E. Parada

    2015-12-01

    Full Text Available Este trabajo se presentó como un documento de debate y reflexión en las 1º Jornadas Nacionales de Docentes e Investigadores Universitarios en Ciencia de la Información (DUCI, llevadas a cabo el 3 y 4 de septiembre de 2015 en la Biblioteca Nacional Mariano Moreno. En el texto se señalan, en forma preliminar y provisional, algunas de las perspectivas más importantes de la Bibliotecología y Ciencia de la Información (BCI. En este contexto se citan las siguientes: la crisis de la denominación propia de la identidad, el papel del liderazgo de la profesión en la Web 2.0, el tópico de la cogestión entre los bibliotecarios y los usuarios, las potencialidades de autorrepresentación y deliberación de las bibliotecas, las dimensiones tecnológicas, la construcción de la lingüística profesional, la importancia del análisis de dominio en la web semántica y sus relaciones con el lenguaje, la tendencia a la inclusión, la gestación de los portales de acceso abierto, el paradigma de la diversidad polimórfica, la dimensión teórica y de índole filosófica, entre otras muchas. Finalmente, se señala la trascendencia de la BCI como una disciplina de la pluralidad y diversidad virtual, y como un campo en estado de apertura para que los ciudadanos transformen la información en conocimiento = This work was presented as a document for debate and reflection in the 1º Jornadas Nacionales de Docentes e Investigadores Universitarios en Ciencia de la Información (DUCI held on 3rd and 4th September 2015 at the Biblioteca Nacional Mariano Moreno. The text indicates, in preliminary and provisional way, some of the most important perspectives of Library and Information Science. In this context, the following perspectives are mentioned: The crisis of the identity denomination, the role of leadership of the profession in the Web 2.0, the topic of co-management between librarians and users, the potential of self-representation and deliberation in

  11. Technical efficiency, efficiency change, technical progress and ...

    African Journals Online (AJOL)

    In May 2006, the Ministers of Health of all the countries on the African continent, at a special session of the African Union, undertook to institutionalise efficiency monitoring within their respective national health information management systems. The specific objectives of this study were: (i) to assess the technical efficiency of ...

  12. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Glasser, Alan H. [Fusion Theory and Computation Inc., Kingston, WA (United States)

    2018-02-02

    Final technical report on DE-SC0016106. This is the final technical report for a portion of the multi-institutional CEMM project. This report is centered around 3 publications and a seminar presentation, which have been submitted to E-Link.

  13. Technical Manual. The ACT®

    Science.gov (United States)

    ACT, Inc., 2014

    2014-01-01

    This manual contains technical information about the ACT® college readiness assessment. The principal purpose of this manual is to document the technical characteristics of the ACT in light of its intended purposes. ACT regularly conducts research as part of the ongoing formative evaluation of its programs. The research is intended to ensure that…

  14. Scientific and Technical English.

    Science.gov (United States)

    Vaclavik, Jaroslav

    Technical English differs from everyday English because of the specialized contexts in which it is used and because of the specialized interests of scientists and engineers. This text provides exercises in technical and scientific exposition in the following fields: mathematics, physics, temperature effects, mechanics, dynamics, conservation of…

  15. Developing Technical Skill Assessments

    Science.gov (United States)

    Hyslop, Alisha

    2009-01-01

    One of the biggest challenges facing the career and technical education (CTE) community as it works to implement the 2006 Perkins Act is responding to more rigorous requirements for reporting on CTE students' technical skill attainment. The U.S. Department of Education suggested in non-regulatory guidance that states and locals use the number of…

  16. Summer Technical Students 2004

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    About 100 technical and doctoral students arrive each year, undergraduates and post-graduates who are preparing diploma or doctoral theses in applied science and technology. They spend up to two years at the Laboratory, as technical students as part of their formal training for a recognised degree or its equivalent.

  17. Transformation of technical infrastructure

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev

    1998-01-01

    article about the need of new planning forums in order to initiate transformations with in management of large technical systems for energy, waste and water supply.......article about the need of new planning forums in order to initiate transformations with in management of large technical systems for energy, waste and water supply....

  18. Technical Agency in Practice

    DEFF Research Database (Denmark)

    Krummheuer, Antonia Lina

    2015-01-01

    ) description of hybrid networks in which human and non-human actants are granted agency without differentiating different kinds of agency, EMCA focuses on the member's perspectives and the situated construction of technical agency that is made relevant within an ongoing interaction. Based on an EMCA analysis......The paper combines the discussion of technical agency and hybrid networks of Actor-Network Theory (ANT) with an ethnomethodological/conversation analytical (EMCA) perspective on situated practices in which participants ascribe agency to technical artefacts. While ANT works with (ethnographic...... of three video recordings of situations in which technical agency is made relevant by the human participants, the paper demonstrates different ways in which agency is granted to technical artefacts. Human participants can treat a technology as communication partner, as an active part (and actant...

  19. The Effect Of A Provisional Sequestration Order - Does It Impose A Limitation To My Right To Be A Member Of Parliament?

    Directory of Open Access Journals (Sweden)

    Leonie Stander

    2015-12-01

    Full Text Available The question asked in this article is inspired by the recent case of Mr Julius Malema. Why the matter is so important and has enjoyed so much attention, is the fact that it was widely suggested that a final order of sequestration would affect Mr Malema's political career in that it would not be possible for him to continue to serve as Member of Parliament. The question that immediately comes to the fore is whether the provisional order of sequestration would not already result in such an outcome. As stipulated by the Constitution of the Republic of South Africa, 1996, an unrehabilitated insolvent may not become a member of the National Assembly, National Council of Provinces, or a Provincial Legislator. Do the words "unrehabilitated insolvent" also include a person who is under provisional sequestration? The purpose of this article is to investigate the effect of a provisional order of sequestration and the focus will be on the ability of an insolvent to act as a Member of Parliament. The legal position in the South African law will be compared with the legal position in the United States of America – which is, with regard to the insolvency law, recognized as a very successful, modern, progressive and dynamic legal system. Voluminous changes to the American bankruptcy law system, to adapt to current practical situations and the current economic climate, have been effected as recently as in 2005. Brief reference will also be made to the legal position in the United Kingdom, due to South Africa's historical ties with the UK and the reliance in the past on the English insolvency law and the Bankruptcy Act, 1986.

  20. Evaluation of Bond Strength between Grooved Titanium Alloy Implant Abutments and Provisional Veneering Materials after Surface Treatment of the Abutments: AnIn vitroStudy.

    Science.gov (United States)

    Venkat, Gowtham; Krishnan, Murugesan; Srinivasan, Suganya; Balasubramanian, Muthukumar

    2017-01-01

    Titanium has become the material of choice with greater applications in dental implants. The success of the dental implant does not only depend on the integration of the implant to the bone but also on the function and longevity of the superstructure. The clinical condition that demands long-term interim prosthesis is challenging owing to the decreased bond between the abutment and the veneering material. Hence, various surface treatments are done on the abutments to increase the bond strength. This study aimed to evaluate the bond strength between the abutment and the provisional veneering materials by surface treatments such as acid etching, laser etching, and sand blasting of the abutment. Forty titanium alloy abutments of 3 mm diameter and 11 mm height were grouped into four groups with ten samples. Groups A, B, C, and D are untreated abutments, sand blasted with 110 μm aluminum particles, etched with 1% hydrofluoric acid and 30% nitric acid, and laser etched with Nd: YAG laser, respectively. Provisional crowns were fabricated with bis-acrylic resin and cemented with noneugenol temporary luting cement. The shear bond strength was measured in universal testing machine using modified Shell-Nielsen shear test after the cemented samples were stored in water at 25°C for 24 h. Load was applied at a constant cross head speed of 5 mm/min until a sudden decrease in resistance indicative of bond failure was observed. The corresponding force values were recorded, and statistical analysis was done using one-way ANOVA and Newman-Keuls post hoc test. The laser-etched samples showed higher bond strength. Among the three surface treatments, laser etching showed the highest bond strength between titanium alloy implant abutment and provisional restorations. The sand-blasted surfaces demonstrated a significant difference in bond strength compared to laser-etched surfaces. The results of this study confirmed that a combination of surface treatments and bond agents enhances the

  1. Socio-technical Betwixtness

    DEFF Research Database (Denmark)

    Bossen, Claus

    2017-01-01

    the intrinsically social and technical interwovenness of design, and the necessity of including affected people and stakeholders in the design process. This betwixtness of socio-technical design is demonstrated by the analysis of two IT systems for healthcare: a foundational model for electronic healthcare records......This chapter focusses on two challenges for socio-technical design: Having to choose between different rationales for design, and the adequate understanding and depiction of the work to be redesigned. These two challenges betwixt the otherwise strong tenets of socio-technical design of pointing out......, and an IT system organizing hospital porters’ work. The conceptual background for the analysis of the cases is provided by a short introduction to different rationales for organizational design, and by pointing to the differences between a linear, rationalistic versus an interactional depiction of work....

  2. Superfund Technical Assistance Grants

    Data.gov (United States)

    U.S. Environmental Protection Agency — This asset includes data related to the Superfund Technical Assistance Grant program, including grant number, award amounts, award dates, period of performance,...

  3. NCDC Technical Reports

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NCDC Technical Reports is a set of retrospective analyses produced by the Research Customer Service Group and the National Climatic Data Center from 1995 to 2008....

  4. Applying technical versatility

    Energy Technology Data Exchange (ETDEWEB)

    None

    1970-01-01

    The breadth and depth of the diversified technical programs at Mound Laboratory since its inception are characterized by a record of competence and versatility during the past generation. A spectrum of mission assignments has been completed successfully in such diverse technical areas as process development and manufacturing of explosive components, research on fuels for the Civilian Power Reactor Program, separation of radioactive materials, fabrication of radioisotopic heat sources, stable gaseous isotope separation and purification, and many other areas. Mound Laboratory is one of the key U.S. Atomic Energy Commission sites that has demonstrated its technical competence in both weapons and non-weapons activities. This report has been prepared to complement the AEC’s vigorous program of scientific information dissemination. Three broad areas of technical competence are highlighted here: explosive technology, radionuclide technology, and stable gaseous isotope separation, which encompass a broad variety of techniques and supporting disciplines.

  5. Technical report writing today

    CERN Document Server

    Riordan, Daniel G

    2014-01-01

    "Technical Report Writing Today" provides thorough coverage of technical writing basics, techniques, and applications. Through a practical focus with varied examples and exercises, students internalize the skills necessary to produce clear and effective documents and reports. Project worksheets help students organize their thoughts and prepare for assignments, and focus boxes highlight key information and recent developments in technical communication. Extensive individual and collaborative exercises expose students to different kinds of technical writing problems and solutions. Annotated student examples - more than 100 in all - illustrate different writing styles and approaches to problems. Numerous short and long examples throughout the text demonstrate solutions for handling writing assignments in current career situations. The four-color artwork in the chapter on creating visuals keeps pace with contemporary workplace capabilities. The Tenth Edition offers the latest information on using electronic resum...

  6. Technical knowledge creation

    DEFF Research Database (Denmark)

    Søberg, Peder Veng

    2017-01-01

    Purpose - The purpose of the paper is to amend shortcomings of existing theory concerning organizational learning and knowledge management. Design/methodology/approach – The paper reviews and refines existing theory. Findings - Findings from cognitive neuroscience suggest that technical knowledge...

  7. OSH technical reference manual

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  8. Provisional T-drug-eluting stenting technique for the treatment of bifurcation lesions: clinical, myocardial scintigraphy and (late) coronary angiographic results.

    Science.gov (United States)

    Vigna, Carlo; Biondi-Zoccai, Giuseppe; Amico, Cesare M; Lanna, Pompeo; Stanislao, Mario; Santoro, Tiberio; Valle, Guido; Fanelli, Raffaele; Loperfido, Francesco

    2007-03-01

    Treatment of bifurcation stenoses (BS) by percutaneous coronary intervention (PCI) remains challenging, even with drug-eluting stents (DES). We aimed to appraise clinical, myocardial scintigraphy and late (>9 months) exploratory angiographic outcomes of provisional T-stenting in the management of BS. We enrolled 53 consecutive patients with BS in the proximity of a greater than or equal to 2 mm side branch (SB). The provisional T-technique was performed in all cases, with implantation of DES in the main branch (MB), SB balloon-only dilatation, and final kissing in the event of >50% SB stenosis. Provisional SB-stenting (using another DES) was reserved to cases with persisting >50% stenosis/dissection and reduced TIMI flow. Further kissing inflation was recommended in such patients. Stress/rest single-photon emission computed tomography (MIBI) and coronary angiography follow up were scheduled >6 and 9 months after PCI, respectively. Major adverse cardiac events at 14 +/- 3 months occurred in 5 patients (9.4% [95% confidence interval 0.1-17.4%]: 1 (1.9% [0.1-5.8%]) non-Q-wave myocardial infarction for subacute stent thrombosis, 2 (3.8% [0.1-9.0%]) target lesion revascularizations and 2 (3.8% [0.1-9.0%]) target vessel revascularizations. Six-month MIBI was performed in 51 patients (96.3%): 4 patients had positive results (7.8% [0.2-15.4%]). Angiography was performed in 4 of these patients and in another 27 patients, with clinical restenosis occurring overall in only 5 (16.1% [8.9-23.3%]), 1 case of clinical restenosis in the MB (3.2% [0.6-9.4%]), and 4 in the SB (12.9% [5.1-24.9%]). This study suggests the safety and efficacy of provisional T-drug-eluting stent implantation in bifurcation coronary lesions, and supports the use of follow-up myocardial scintigraphy, with angiography reserved for selected patients and lesions.

  9. The effects of an airborne-particle abrasion and silica-coating on the bond strength between grooved titanium alloy temporary cylinders and provisional veneering materials.

    Science.gov (United States)

    Wei, Ann Yu-Chieh; Sharma, Arun B; Watanabe, Larry G; Finzen, Frederick C

    2011-03-01

    Even though mechanical retentive features, such as grooves, are incorporated into the surface of titanium alloy temporary cylinders, a reliable bond to veneering provisional materials is not always achievable for screw-retained provisional implant restorations. There is insufficient information about the effect of tribochemical silica coating on the bond strength between provisional materials and grooved titanium alloy temporary cylinders. The purpose of this study was to evaluate, in vitro, the effect of an airborne-particle abrasion and silica-coating technique on the bond strength between grooved titanium alloy temporary cylinders and provisional veneering bisphenol-A glycidyl methacrylate and polymethyl methacrylate materials. Forty grooved titanium alloy (Ti-6Al-4V) internal connection implant temporary cylinders were used. A disc of veneering material (7.1 × 3.4 mm) was created around the midsection of each cylinder. Forty specimens were divided into 4 groups (n=10): group NoTxPMMA, no surface treatment and polymethyl methacrylate veneering material; group NoTxBisGMA, no surface treatment and BisGMA veneering material; group AbPMMA, airborne-particle abrasion, silica-coating surface treatment (Rocatec), and polymethyl methacrylate; and group AbBisGMA, airborne-particle abrasion, silica-coating surface treatment (Rocatec), and BisGMA. Each specimen was subjected to ultimate shear load testing at the interface of the veneering material and the temporary cylinder in a universal testing machine at a constant crosshead speed of 5 mm/min. Data were analyzed with a 1-way ANOVA (α=.05) followed by post hoc Student-Newman-Keuls test. Each specimen underwent surface observation with a light microscope at ×40 magnification to compare fracture patterns. Airborne-particle abrasion and silica-coating surface treatment significantly lowered the shear bond strength (Pveneering materials. It weakened the provided mechanical retention, especially when it was used with Bis

  10. Retention of technical professionals

    OpenAIRE

    2012-01-01

    M.Ing. The loss of skills and knowledge of technical professionals experienced by many organizations in South Africa has serious implications on the competitiveness of these organizations in the local and international markets. Organizations should come to realize that they should find creative ways to retain critical skills and knowledge and ensure continuity in terms of succession management. Technical professionals play a crucial role in society. They are responsible for maintaining the...

  11. Inflation Targeting: Provisional Results

    Directory of Open Access Journals (Sweden)

    Cerna, Silviu

    2010-06-01

    Full Text Available Inflation targeting monetary policy framework that requires the central bank to achieve a low inflation has contributed to price stability in industrialized countries. As well as the other developing countries, ex communist countries have also tried to apply this strategy, which was susceptible to increase monetary policy transparency and to determine authorities to make necessary reforms in order to pass from a planned to a market economy. In Romania, inflation targeting has contributed, to a large extent, to price increase smoothening, without affecting economic growth. Knowing the factors that have determined this unquestionable success allows for not only understanding the Romanian transition process, but also draw some useful conclusions in view of the necessary actions for adopting the euro.

  12. 78 FR 27963 - Reliability Technical Conference; Notice of Technical Conference

    Science.gov (United States)

    2013-05-13

    ... Energy Regulatory Commission Reliability Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, July 9, 2013... to the webcast. The Capitol Connection provides technical support for webcasts and offers the option...

  13. Development of a Provisional Model to Improve Transitional Care for Female Adolescents with a Rare Genital Malformation as an Example for Orphan Diseases

    Directory of Open Access Journals (Sweden)

    Elisabeth Simoes

    2014-01-01

    Full Text Available Deficits of care exist during the transitional period, when young people with ongoing needs of support to achieve their physical, social, and psychological potential are entering adulthood. This study aims to develop a patient oriented, structured provisional model to improve transitional care for adolescents with Mayer-Rokitansky-Kuester-Hauser-Syndrome as an example for orphan diseases, where problems of access and continuity are even more complex. The study is funded by the German Federal Ministry of Education and Research (BMBF-Funding Code 01GY1125. The target patient group are young females with this disorder, treated at the Centre for Rare Genital Malformations in Women (ZSGF, University Hospital of Tuebingen. The study comprises five phases: an appraisal of literature, assessment of patients (n=25, parents’, partners’, and health and social care providers’ (n=24 needs and experienced deficits in care and support in a qualitative approach, construction of a provisional model via scenario technique, followed by communicative validation (including interested public, n=100, preference finding, and identification of patient-oriented quality aims for follow-up. Quantitative data from questionnaires and chart review (as sociodemographic data, nonresponder analysis, and preference rating are worked up for descriptive statistics. The results provide a platform for the development of future multidisciplinary transitional intervention programs in orphan diseases.

  14. Kissing balloon or sequential dilation of the side branch and main vessel for provisional stenting of bifurcations: lessons from micro-computed tomography and computational simulations.

    Science.gov (United States)

    Foin, Nicolas; Torii, Ryo; Mortier, Peter; De Beule, Mathieu; Viceconte, Nicola; Chan, Pak Hei; Davies, Justin E; Xu, Xiao Yun; Krams, Rob; Di Mario, Carlo

    2012-01-01

    This study sought to evaluate post-dilation strategies in bifurcation stenting. In bifurcation stenting practice, it is still controversial how post-dilation should be performed and whether the kissing balloon (KB) technique is mandatory when only the main vessel (MV) receives a stent. A series of drug-eluting stents (DES) (n = 26) were deployed in a coronary bifurcation model following a provisional approach. After the deployment of the stent in the MV, post-dilation with the KB technique was compared with a 2-step, sequential post-dilation of the side branch (SB) and MV without kissing. The percentage of the SB lumen area free of stent struts was similar after KB (79.1 ± 8.7%) and after the 2-step sequence (74.4 ± 11.6%, p = 0.25), a considerable improvement compared with MV stenting only without dilation of the stent at the SB ostium (30.8 ± 7.8%, p stress concentration proximal to the SB. KB also led to a higher risk of incomplete stent apposition at the proximal stent edge (30.7 ± 26.4% vs. 2.8 ± 9.6% for 2-step, p = 0.0016). Sequential 2-step post-dilation of the SB and MV may offer a simpler and more efficient alternative to final KB technique for provisional stenting of bifurcations. Copyright © 2012 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

  15. A comparison of two methods of removing zinc oxide-eugenol provisional cement residue from the internal surface of cast restorations.

    Science.gov (United States)

    Mosharraf, Ramin; Soleimani, Bahram; Sanaee-Nasab, Mehdi

    2009-05-01

    Remnants of provisional cement on the internal surface of cast restorations can have an adverse effect on the performance of the definitive luting agent. The purpose of this study was to evaluate the effect of eugenol-containing temporary cement removal by an ultrasonic or an organic solvent on the retentive strength of metallic rings cemented to amalgam cores using zinc phosphate cement. A total of 36 cylindrical amalgam cores measuring 5.9 x 6 mm were made by condensing amalgam in brass molds for use in this in vitro study. Thirty-six cylindrical spaces measuring 6 x 6 mm were machined in the center of cast rods of Rexillium III alloy to create simulated retainers. The amalgam cores were divided into two groups and provisionally cemented in these cylindrical spaces (retainers) using zinc oxide-eugenol cement. After separation of the cores from the retainers, one group was cleaned with an ultrasonic cleaning device with water and the other group was cleaned with Solitine organic solvent. All specimens were then cemented with zinc phosphate cement and the samples were stored at 100% humidity in a 37 degrees C water bath after which they were tested with a DARTEK testing machine at a 0.02 cm/minute cross head speed. The data were analyzed using the Independent t-test. The statistical analysis revealed a significant difference between the two groups (pcleaning the internal surface of cast restorations, the ultrasonic cleaning method is more effective for removing zinc-oxide temporary cement.

  16. Technical training - Places available

    CERN Multimedia

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924)   Electronics design Next Session Duration Language Availability Certified LabVIEW Associate Developer (CLAD) 06-Dec-12 to 06-Dec-12 1 hour English One more place available Compatibilité électromagnetique (CEM): Applications 23-Nov-12 to 23-Nov-12 3.5 hours English 3 places available Compatibilité électromagnétique (CEM): Introduction 23-Nov-12 to 23-Nov-12 3 hours English 43 places available Effets des Radiations sur les composants et systèmes électroniques 11-Dec-12 to 12-Dec-12 1 day 4 hours French 9 places available LabVIEW for beginners ...

  17. Technical training: places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924)   Electronics design Next Session Duration Language Introduction to VHDL 21-Feb-13 to 22-Feb-13 2 days English Mechanical design Next Session Duration Language ANSYS - Introduction à ANSYS Mechanical APDL 04-Feb-13 to 07-Feb-13 4 days English Applications de la cotation fonctionnelle et du langage ISO 06-Feb-13 to 08-Feb-13 2 days 4 hours French CATIA V5 – Surfacique 14-Jan-13 to 15-Jan-13 2 days French Office software Next Session Duration Language ACCESS 2010 - niveau 2 : ECDL 06-Feb-13 to 07-Feb-13 2 days French Dreamweaver CS3 - Niveau 1 14-Jan-13 to 15-Jan-13 2 d...

  18. Technical training - places available

    CERN Multimedia

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924) HR Department »Electronics design Next Session Duration Language Availability Comprehensive VHDL for FPGA Design 08-Oct-12 to 12-Oct-12 5 days English 3 places available Foundations of Electromagnetism and Magnet Design (EMAG) 14-Nov-12 to 27-Nov-12 6 days English 20 places available Impacts de la suppression du plomb (RoHS) en électronique 26-Oct-12 to 26-Oct-12 8 hours French 15 places available Introduction to VHDL 10-Oct-12 to 11-Oct-12 2 days English 7 places available LabVIEW Real Time and FPGA 13-Nov-12 to 16-Nov-12 5 days French 5 places available »Mechanical design Next Se...

  19. Fuel Element Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Burley, H.H. [ed.

    1956-08-01

    It is the purpose of the Fuel Element Technical Manual to Provide a single document describing the fabrication processes used in the manufacture of the fuel element as well as the technical bases for these processes. The manual will be instrumental in the indoctrination of personnel new to the field and will provide a single data reference for all personnel involved in the design or manufacture of the fuel element. The material contained in this manual was assembled by members of the Engineering Department and the Manufacturing Department at the Hanford Atomic Products Operation between the dates October, 1955 and June, 1956. Arrangement of the manual. The manual is divided into six parts: Part I--introduction; Part II--technical bases; Part III--process; Part IV--plant and equipment; Part V--process control and improvement; and VI--safety.

  20. Transformation of technical infrastructure

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev

    , the evolution of large technological systems and theories about organisational and technological transformationprocesses. The empirical work consist of three analysis at three different levels: socio-technical descriptions of each sector, an envestigation of one municipality and envestigations of one workshop......The scope of the project is to investigate the possibillities of - and the barriers for a transformation of technical infrastructure conserning energy, water and waste. It focus on urban ecology as a transformation strategy. The theoretical background of the project is theories about infrastructure...

  1. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    You are running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

  2. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2009-01-01

    Are you running Vista on your new PC – or are you planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual session of this course will take place on 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

  3. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    Are you running Vista on your new PC – or are you planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

  4. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    You are running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced using Windows XP. The next bilingual sessions of this course will take place on December 12, 2008 and January 30, 2009. Register using our catalogue : http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at Technical.Training@cern.ch

  5. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    Are you running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at Technical.Training@cern.ch

  6. KSC Technical Capabilities Website

    Science.gov (United States)

    Nufer, Brian; Bursian, Henry; Brown, Laurette L.

    2010-01-01

    This document is the website pages that review the technical capabilities that the Kennedy Space Center (KSC) has for partnership opportunities. The purpose of this information is to make prospective customers aware of the capabilities and provide an opportunity to form relationships with the experts at KSC. The technical capabilities fall into these areas: (1) Ground Operations and Processing Services, (2) Design and Analysis Solutions, (3) Command and Control Systems / Services, (4) Materials and Processes, (5) Research and Technology Development and (6) Laboratories, Shops and Test Facilities.

  7. Final Technical Report

    International Development Research Centre (IDRC) Digital Library (Canada)

    Tommy Ngai

    2014-03-31

    Mar 31, 2014 ... capacity building activities) to upgrade the technical and management capacities of governments and NGOs .... Furthermore, as described in the original proposal, CAWST provided practical perspectives in ..... when a funder or manager refuses to include important and central issues in the evaluation.

  8. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) IT3T/1 - Read your mail and more with Outlook 2003 : 14.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/2 - Creating, managing and using distribution lists with Simba2 : 16.6.2005 (IT Technical Training Tutorial, free of charge) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP : 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003 : 30.6.2005 (IT Technical Training Tutorial, free of charge) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoC...

  9. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW Migration 6 to 7: 14.6.2005 (1 day) IT3T/1 - Read your mail and more with Outlook 2003 : 14.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/2 - Creating, managing and using distribution lists with Simba2 : 16.6.2005 (IT Technical Training Tutorial, free of charge) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) size="2">(1journée) Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Shor...

  10. TRANSLATING SERVICE TECHNICAL PROSE

    African Journals Online (AJOL)

    In addition to terminology, jargon and slang, technical texts are characterized by a particular style. An American manual of hand-to-hand fighting published during the Second World War contained the following instructions: What is so peculiarly sinister, says Kenneth. Hudson2, is the degree to which the lan!;Juage of.

  11. Artwork as Technics

    Science.gov (United States)

    Jackson, Mark

    2016-01-01

    "Artwork as technics" opens discussion on activating aesthetics in educational contexts by arguing that we require some fundamental revision in understanding relations between aesthetics and technology in contexts where education is primarily encountered instrumentally and technologically. The paper addresses this through the writing of…

  12. Routledge French technical dictionary

    CERN Document Server

    1994-01-01

    The French-English volume of this highly acclaimed set consists of some 100,000 keywords in both French and English, drawn from the whole range of modern applied science and technical terminology. Covers over 70 subject areas, from engineering and chemistry to packaging, transportation, data processing and much more.

  13. Technical Writing in Hydrogeology.

    Science.gov (United States)

    Tinker, John R., Jr.

    1986-01-01

    A project for Writing Across the Curriculum at the University of Wisconsin-Eau Claire is described as a method to relate the process of writing to the process of learning hydrology. The project focuses on an actual groundwater contamination case and is designed to improve the technical writing skills of students. (JN)

  14. Materials Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-08-01

    Roadmap identifying the efforts of the Materials Technical Team (MTT) to focus primarily on reducing the mass of structural systems such as the body and chassis in light-duty vehicles (including passenger cars and light trucks) which enables improved vehicle efficiency regardless of the vehicle size or propulsion system employed.

  15. Technical Entrepreneurship: A Symposium.

    Science.gov (United States)

    Cooper, Arnold C., Ed.; Komives, John L., Ed.

    Contained in this document are papers presented at the Symposium on Technical Entrepreneurship at Purdue University by researchers who were then or had previously been engaged in research in the area. Because formal research in this area was in its infancy, there was a particular need to afford investigators in the field opportunities to compare…

  16. Final technical report

    DEFF Research Database (Denmark)

    Juhl, Thomas Winther; Nielsen, Jakob Skov

    This project entails research with the goal to extend laser cutting of steel based metals to thickness above 20 mm and laser powers in the 10 kW range, with adequate accuracy and economically viable cutting speeds. The technical approach is to develop mirror based cutting heads with truly coaxial...

  17. Single-Tooth Rehabilitations Supported by Dental Implants Used in an Immediate-Provisionalization Protocol: Report on Long-Term Outcome with Retrospective Follow-Up.

    Science.gov (United States)

    Maló, Paulo; de Araújo Nobre, Miguel; Lopes, Armando; Ferro, Ana; Gravito, Inês

    2015-10-01

    There is a need for long-term studies evaluating the outcome of single-tooth rehabilitations supported by dental implants in immediate loading. To report the long-term outcome (in excess of 5 years) of single-tooth rehabilitations supported by dental implants in an immediate-provisionalization protocol. This retrospective cohort study included 332 consecutive patients (189 females and 143 males) with an average age of 47 years (range: 16 to 82 years) who were rehabilitated between 1996 and 2006 with 594 single crowns supported by dental implants in immediate loading. Implant success rates were calculated based on implant function and using life tables. Marginal bone levels were measured at 5 and 10 years. Mechanical and biological complications were calculated for the follow-up period between implant insertion and 5 years and every 6 months thereafter. Fifty-four patients dropped out of the study (16.5%). Nineteen patients lost a total of 25 implants (n = 23 in the maxilla; n = 2 in the mandible), rendering a cumulative survival rate of 95.7% at both 5 and 10 years of follow-up. The mean marginal bone levels were 1.56 mm (standard deviation 0.78 mm) and 1.75 mm (standard deviation 0.29 mm) at 5 and 10 years of follow-up. Mechanical complications occurred in 83 patients and 116 implants (19.5%) up to the 10-year follow-up, namely prosthetic screw loosening (2.4%), abutment complications (4.4%), fracture of provisional crowns (9.6%), and fracture of definitive ceramic crowns (3.5%). Biological complications occurred in 58 patients and 79 implants (13.3%) up to the 10-year follow-up, with the majority consisting in peri-implant pathology. Considering the high survival rates and stable marginal bone levels after 10 years, it can be concluded within the limitations of the present study that replacement of single teeth with dental implants in an immediate-provisionalization protocol is a viable and safe treatment option for both maxilla and mandible.

  18. Provisional versus elective two-stent strategy for unprotected true left main bifurcation lesions: Insights from a FAILS-2 sub-study.

    Science.gov (United States)

    Kawamoto, Hiroyoshi; Chieffo, Alaide; D'Ascenzo, Fabrizio; Jabbour, Richard J; Naganuma, Toru; Cerrato, Enrico; Ugo, Fabrizio; Pavani, Marco; Varbella, Ferdinando; Boccuzzi, Giacomo; Pennone, Mauro; Garbo, Roberto; Conrotto, Federico; Biondi-Zoccai, Giuseppe; D'Amico, Maurizio; Moretti, Claudio; Escaned, Javier; Gaita, Fiorenzo; Nakamura, Sunao; Colombo, Antonio

    2018-01-01

    This study sought to investigate the optimal percutaneous coronary intervention (PCI) strategy for true unprotected left main coronary artery (ULMCA) bifurcations. The FAILS-2 was a retrospective multi-center study including patients with ULMCA disease treated with second-generation drug-eluting stents. Of these, we compared clinical outcomes of a provisional strategy (PS; n=216) versus an elective two-stent strategy (E2S; n=161) for true ULMCA bifurcations. The primary endpoint was the incidence of major adverse cardiac events (MACEs) at 3-years. We further performed propensity-score adjustment for clinical outcomes. There were no significant differences between the groups in terms of patient and lesion characteristics. 9.7% of patients in the PS group crossed over to a provisional two-stent strategy. MACEs were not significantly different between groups (MACE at 3-year; PS 28.1% vs. E2S 28.9%, adjusted p=0.99). The rates of target lesion revascularization (TLR) on the circumflex artery (LCX) were numerically high in the E2S group (LCX-TLR at 3-years; PS 11.8% vs. E2S 16.6%, adjusted p=0.51). E2S was associated with a comparable MACE rate to PS for true ULMCA bifurcations. The rates of LCX-TLR tended to be higher in the E2S group although there was no statistical significance. This study sought to compare the clinical outcomes of a provisional strategy (PS) with an elective two-stent strategy (E2S) for the treatment of true unprotected left main coronary artery bifurcations. 377 Patients (PS 216 vs. E2S 161 patients) were evaluated, and 9.7% in the PS group crossed over to a two-stent strategy. E2S was associated with a similar major adverse cardiac event rate at 3-years when compared to the PS strategy (PS 28.1% vs. E2S 28.9%, p=0.99). However, the left circumflex artery TLR rate at 3-year tended to be higher in the E2S group (PS 11.8% vs. E2S 16.6%, p=0.51). Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Instrucción provisional para el empleo de puntos de soldadura eléctrica por resistencia en las construcciones de acero

    Directory of Open Access Journals (Sweden)

    Batanero, J.

    1963-06-01

    Full Text Available As an initial measure to generalise spot welding in the field of metallic structures, the Deutsche Ausschuss fur Stahlbau has issued a provisional specification, of which a full translation is given in this paper. The Specification includes a number of rules, as well as comments and recommendations on the method of establishing the aptitude of a given firm, or a workshop, to practise this spot welding technique. The various chapters of these Specifications give an account of the fundamental calculation principles and the best practise that should be followed in this type of welding. Advise is also offered on the initial care to be taken in applying these principles and specifications in actual practice. The comments that follow serve to clarify and explain the reasons which underlie the various conditions specified in this text. Finally, the recommendations on the method of establishing the aptitude of given workshops to undertake spot welding work are based on the following principle: the construction of structures with spot welded joints can only be entrusted to people who have attained a certain standard of skill, precisely because these structures are meant to be load bearing, and their real strength cannot be checked in practise, a posteriori, except by means of destruction tests. The full text of these Provisional Specifications will be given in three consecutive numbers of the magazine.La soldadura por resistencia es un medio de unión que, en ocasiones, puede resultar muy cómodo y económico. En las estructuras metálicas puras se ha venido empleando poco hasta ahora, aunque su utilización estaba bastante difundida en el empalme a tope de redondos, formación de parrillas de losas y tuberías, etc., con destino a las estructuras de hormigón. Sin embargo, las experiencias realizadas en los últimos años han demostrado que los puntos de soldadura por resistencia pueden constituir medios de unión que, bajo ciertas condiciones

  20. Evaluation of bond strength between grooved titanium alloy implant abutments and provisional veneering materials after surface treatment of the abutments: An in vitro study

    Directory of Open Access Journals (Sweden)

    Gowtham Venkat

    2017-01-01

    Full Text Available Introduction: Titanium has become the material of choice with greater applications in dental implants. The success of the dental implant does not only depend on the integration of the implant to the bone but also on the function and longevity of the superstructure. The clinical condition that demands long-term interim prosthesis is challenging owing to the decreased bond between the abutment and the veneering material. Hence, various surface treatments are done on the abutments to increase the bond strength. Aim: This study aimed to evaluate the bond strength between the abutment and the provisional veneering materials by surface treatments such as acid etching, laser etching, and sand blasting of the abutment. Materials and Methods: Forty titanium alloy abutments of 3 mm diameter and 11 mm height were grouped into four groups with ten samples. Groups A, B, C, and D are untreated abutments, sand blasted with 110 μm aluminum particles, etched with 1% hydrofluoric acid and 30% nitric acid, and laser etched with Nd: YAG laser, respectively. Provisional crowns were fabricated with bis-acrylic resin and cemented with noneugenol temporary luting cement. The shear bond strength was measured in universal testing machine using modified Shell–Nielsen shear test after the cemented samples were stored in water at 25°C for 24 h. Load was applied at a constant cross head speed of 5 mm/min until a sudden decrease in resistance indicative of bond failure was observed. The corresponding force values were recorded, and statistical analysis was done using one-way ANOVA and Newman–Keuls post hoc test. Results: The laser-etched samples showed higher bond strength. Conclusion: Among the three surface treatments, laser etching showed the highest bond strength between titanium alloy implant abutment and provisional restorations. The sand-blasted surfaces demonstrated a significant difference in bond strength compared to laser-etched surfaces. The results of this

  1. Immediate loading in the maxilla using flapless surgery, implants placed in predetermined positions, and prefabricated provisional restorations: a retrospective 3-year clinical study.

    Science.gov (United States)

    Rocci, Antonio; Martignoni, Massimiliano; Gottlow, Jan

    2003-01-01

    Immediate loading of dental implants shortens the treatment time and makes it possible to give the patient an esthetic appearance during the whole treatment period. The aim of the present study was to evaluate an immediate-loading treatment protocol, which included flapless surgery, implants placed in predetermined positions and connected to prefabricated provisional restorations, and the 3-year clinical results. A total of 97 Brånemark System Mk IV implants (Nobel Biocare AB, Gothenburg, Sweden) with a machined surface were inserted in the maxillas of 46 patients. A presurgical three-dimensional model of the patients' soft tissue and underlying alveolar bone anatomy was created, which allowed the clinician to place the implants in predetermined positions and connect them to prefabricated provisional restorations. A surgical template with drilling guides corresponding to each implant was used. The apical part of the master guide was equipped with a circular "mucotome," which punched out a 5 mm hole in the mucosa to eliminate the need for flap elevation. The patients received 25 fixed partial prostheses and 27 single-tooth restorations. Bone quality and quantity were assessed. Radiographic examinations were performed on the day of surgery/loading and at the 1-, 2-, and 3-year follow-up visits. All implant sites showed intact buccal and lingual bone walls during surgery, confirming the accuracy of the bone-mapping procedure. The prefabricated temporary restorations fitted, meaning that the implants were positioned clinically in the same way as on the cast. Nine implants in eight patients failed during the first 8 weeks of loading. This resulted in a cumulative survival rate of 91% after 3 years of prosthetic load. The survival rate of splinted implants was 94%. The number of failed implants was significantly higher in cases of single-tooth replacements and placement in soft bone sites and smokers. The failed implants were successfully replaced according to a two

  2. The management of an edentulous maxilla using a CAD/CAM-guided immediately loaded provisional implant prosthesis with screw-retained and cement-retained abutments: a clinical report.

    Science.gov (United States)

    Tee-Khin, Neo; Cheng, Ansgar C; Lee, Helena; Wee, Alvin G

    2009-12-01

    Functional rehabilitation of edentulous jaws using a CAD/CAM-guided implant protocol is commonly recommended as a definitive treatment modality. A patient with an edentulous maxilla received 7 endosseous implants using a CAD/CAM surgical template. A provisional maxillary acrylic resin fixed complete denture was connected immediately after implant placement using a combination of screw-retained and cement-retained abutments.

  3. Spiritual well-being and quality of life among Icelanders receiving palliative care: data from Icelandic pilot-testing of a provisional measure of spiritual well-being from the European Organisation for Research and Treatment of Cancer.

    Science.gov (United States)

    Asgeirsdottir, G H; Sigurdardottir, V; Gunnarsdottir, S; Sigurbjörnsson, E; Traustadottir, R; Kelly, E; Young, T; Vivat, B

    2017-03-01

    Palliative care focuses on improving quality of life (QoL). This study examined the feasibility of the Icelandic version of a provisional European Organisation for Research and Treatment of Cancer (EORTC) measure of spiritual well-being (SWB), and explored the relationship between SWB and QoL for palliative care patients in Iceland. Instruments from the EORTC were used: the provisional measure of SWB, which was undergoing pilot-testing in Iceland, and the EORTC QLQ C15-PAL. The correlation between scores was examined and descriptive statistics were used. Structured interviews explored feasibility. Thirty persons participated with average age 72 years. Belief in God or a higher power had the mean 3.33 on a 1-4 scale and the mean for overall SWB was 5.73 on a 1-7 scale. The mean score for global health/QoL was 59.4, physical functioning 48.5 and emotional functioning 78.9 on a 0-100 scale. Overall QoL was positively correlated with SWB showing r(30) = 0.386, P = 0.035. The participants found that answering the provisional EORTC QLQ-SWB prompted an emotional response and took the opportunity to discuss the subject. The provisional SWB measure was found relevant for the Icelandic context, and the study indicates that SWB and QoL are closely connected. © 2015 John Wiley & Sons Ltd.

  4. Development of functional foods for radiation workers - In vivo test on the effect of functional food for stem cell protection and preparing the provisional product

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sung Ho; Oh, Heon; Kim, Se Ra; Lee, Song Eun [Chonnam National University, Kwangju (Korea)

    2000-04-01

    We performed this study to determine (1) the effect of several oriental prescriptions as energy tonic (Chinese medical concept : Bu-Qi) or blood building (Chinese medical concept : Bu-Xie) decoction and its major ingredients, (2) the biological stability of irradiated Chinese medical prescriptions, and (3) the effect of several proposed prescriptions and its fractions on jejunal crypt survival (12 Gy), endogenous spleen colony formation(6.5 Gy), and apoptosis(2 Gy) in jejunal crypt cells of mice irradiated with high and low dose of gamma-irradiation. For the study of evaluation on the radioprotective effects of effective prescriptions, we tried the test on change of survival and hematological changes and finally we prepared the provisional product. 57 refs., 5 figs., 38 tabs. (Author)

  5. Immediate occluding definitive partial fixed prosthesis versus non-occluding provisional restorations - 4-month post-loading results from a pragmatic multicenter randomised controlled trial.

    Science.gov (United States)

    Heinemann, Friedhelm; Grufferty, Brendan; Papavasiliou, George; Dominiak, Marzena; García, Jaime Jiménez; Trullenque-Eriksson, Anna; Esposito, Marco

    2016-01-01

    To compare the clinical outcome of dental implants restored with definitive occluding partial fixed prostheses within 1 week, after implant placement with immediate non-occluding provisional restorations, which were to be replaced by definitive prostheses after 4 months. Fifty partially edentulous patients treated with one to three dental implants, at least 8.5 mm long and 4.0 mm wide inserted with a torque of at least 35 Ncm, were randomised in two groups of 25 patients each, to be immediately loaded with partial fixed prostheses. Patients of one group received one definitive screw-retained metal-ceramic prosthesis in occlusion within 1 week after placement. Patients of the other group received one non-occluding provisional acrylic reinforced prosthesis within 24 h after implant placement. Provisional prostheses were replaced after 4 months by definitive ones. The follow-up for all patients was 4-months post-loading. Outcome measures were prosthesis and implant failures, any complications, peri-implant marginal bone level changes, aesthetic evaluation by a clinician, patient satisfaction, chair time and number of visits at the dental office from implant placement to delivery of definitive restorations. No patient dropped out. Two immediately occlusally loaded implants with their related definitive prostheses (8%) failed early (difference in proportions = 0.08; 95% CI: -0.03 to 0.19; P = 0.490). Four complications occurred in the occlusal group versus one in the non-occlusal group; (difference in proportions = 0.12; 95% CI: -0.04 to 0.28; P = 0.349). Four months after loading, patients subjected to non-occlusal loading lost an average of 0.72 mm of peri-implant bone versus 0.99 mm of patients restored with occluding definitive partial fixed prostheses. There were no statistically significant differences for marginal bone level changes between the two groups (mean difference = -0.27 mm; 95% CI: -0.84 to 0.30; P = 0.349). The differences for aesthetic scores showed

  6. Where did the doctors go? A study of retention and migration of provisionally licensed international medical graduates practising in Newfoundland and Labrador between 1995 and 2006.

    Science.gov (United States)

    Audas, Rick; Ryan, Ann; Vardy, David

    2009-01-01

    More than any other Canadian province, Newfoundland and Labrador (NL) relies on provisionally licensed international medical graduates (PLIMGs) to provide primary health care, particularly in rural communities. However, turnover among PLIMGs is high, and this is expensive and disruptive to the populations they serve. We developed and analyzed a database that allowed us to quantify the turnover among PLIMGs and also to determine the Canadian destinations of PLIMGs who cease practising in NL. We found that about 1 in 5 PLIMGs remain in province for a period of 5 years and that those who emigrate within Canada are most likely to go to Ontario. Many PLIMGs cannot be tracked after they leave the province. We speculate that many PLIMGs are moving on to the more lucrative US market.

  7. El Salvador - Formal Technical Education

    Data.gov (United States)

    Millennium Challenge Corporation — With a budget of nearly $20 million, the Formal Technical Education Sub-Activity was designed to strengthen technical and vocational educational institutions in the...

  8. Information Assurance Technical Framework (IATF)

    National Research Council Canada - National Science Library

    2000-01-01

    The Information Assurance Technical Framework (IATF) document was developed to help a broad audience of users both define and understand their technical needs as well as select approaches to meet those needs...

  9. Bioethics for Technical Experts

    Science.gov (United States)

    Asano, Shigetaka

    Along with rapidly expanding applications of life science and technology, technical experts have been implicated more and more often with ethical, social, and legal problems than before. It should be noted that in this background there are scientific and social uncertainty elements which are inevitable during the progress of life science in addition to the historically-established social unreliability to scientists and engineers. In order to solve these problems, therefore, we should establish the social governance with ‘relief’ and ‘reliance’ which enables for both citizens and engineers to share the awareness of the issues, to design social orders and criterions based on hypothetical sense of values for bioethics, to carry out practical use management of each subject carefully, and to improve the sense of values from hypothetical to universal. Concerning these measures, the technical experts can learn many things from the present performance in the medical field.

  10. Understanding Socio Technical Modularity

    DEFF Research Database (Denmark)

    Thuesen, Christian Langhoff; Kudsk, Anders; Hvam, Lars

    2011-01-01

    Modularity has gained an increasing popularity as a central concept for exploring product structure, process structure, organization structure and supply chain structure. With the offset in system theory the predominant understanding of modularity however faces difficulties in explaining the social...... Theory in particular. By formulating modularity from an ANT perspective covering social, material and process aspects, the modularity of a socio-technical system can be understood as an entanglement of product, process, organizational and institutional modularity. The theoretical framework is illustrated...... dimension of modularity like irrational behaviors, cultural differences, learning processes, social organization and institutional influences on modularity. The paper addresses this gab offering a reinterpretation of the modularity concept from a socio-technical perspective in general and Actor Network...

  11. Independent technical review, handbook

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    Purpose Provide an independent engineering review of the major projects being funded by the Department of Energy, Office of Environmental Restoration and Waste Management. The independent engineering review will address questions of whether the engineering practice is sufficiently developed to a point where a major project can be executed without significant technical problems. The independent review will focus on questions related to: (1) Adequacy of development of the technical base of understanding; (2) Status of development and availability of technology among the various alternatives; (3) Status and availability of the industrial infrastructure to support project design, equipment fabrication, facility construction, and process and program/project operation; (4) Adequacy of the design effort to provide a sound foundation to support execution of project; (5) Ability of the organization to fully integrate the system, and direct, manage, and control the execution of a complex major project.

  12. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, Mike, J., P.E.

    2012-08-30

    The STI product is the Final Technical Report from ReliOn, Inc. for contract award DE-EE0000487: Recovery Act PEM Fuel Cell Systems Providing Emergency Reserve and Backup Power. The program covered the turnkey deployment of 431 ReliOn fuel cell systems at 189 individual sites for AT&T and PG&E with ReliOn functioning as the primary equipment supplier and the project manager. The Final Technical Report provides an executive level summary, a comparison of the actual accomplishments vs. the goals and objectives of the project, as well as a summary of the project activity from the contract award date of August 1, 2009 through the contract expiration date of December 31, 2011. Two photos are included in the body of the report which show hydrogen storage and bulk hydrogen refueling technologies developed as a result of this program.

  13. Provisional T-stenting and kissing balloon in the treatment of coronary bifurcation lesions: results of the French multicenter "TULIPE" study.

    Science.gov (United States)

    Brunel, Philippe; Lefevre, Thierry; Darremont, Olivier; Louvard, Yves

    2006-07-01

    In previous prospective studies, a strategy of (a) stenting of the main branch, (b) provisional T-stenting of the side branch, and (c) final kissing balloon inflation, was associated with high success and low target lesion revascularization (TLR) rates on the long-term. To examine the performance of this strategy in a multicenter study. Consecutive patients were treated at 14 French medical centers for de novo coronary bifurcation lesions with the same technique used. Immediate results and clinically-driven TLR at 7 months were examined. The mean reference diameters of the main and side branches were 3.2 +/- 0.6 mm and 2.4 +/- 0.5 mm, respectively. The side branch was stented in 34% of patients. A wave and 5 non-Qwaves MI (0.54% and 2.7%). At 7 months of follow-up, 3 patients (1.76%) had died, 1 suffered a non-Q-wave MI (0.59%), and 28 (15.88%) underwent TLR. By multivariate analysis, a lower left ventricular ejection fraction (OR: 0.934), moderate calcifications (OR: 7.86), and non-use of the "jailed" wire technique (OR: 4.26) were associated with reinterventions during follow-up. A strategy of provisional T-stenting with a tubular stent and final kissing balloon angioplasty for the treatment of coronary bifurcation lesions was safe and associated with a low TLR rate at 7 months. This strategy should be applicable to the new era of drug eluting stents. Copyright 2006 Wiley-Liss, Inc.

  14. Vaccination Coverage for Selected Vaccines, Exemption Rates, and Provisional Enrollment Among Children in Kindergarten - United States, 2016-17 School Year.

    Science.gov (United States)

    Seither, Ranee; Calhoun, Kayla; Street, Erica J; Mellerson, Jenelle; Knighton, Cynthia L; Tippins, Ashley; Underwood, J Michael

    2017-10-13

    State and local school vaccination requirements help protect students and communities against vaccine-preventable diseases (1). CDC reports vaccination coverage and exemption data for children attending kindergarten (kindergartners) collected by federally funded immunization programs in the United States.* The typical age range for kindergartners is 4-6 years. Although vaccination requirements vary by state (the District of Columbia [DC] is counted as a state in this report.), the Advisory Committee on Immunization Practices recommends that children in this age range have received, among other vaccinations, 5 doses of diphtheria, tetanus, and acellular pertussis vaccine (DTaP), 2 doses of measles, mumps, and rubella vaccine (MMR), and 2 doses of varicella vaccine (2). This report summarizes 2016-17 school year MMR, DTaP, and varicella vaccination coverage reported by immunization programs in 49 states, exemptions in 50 states, and kindergartners provisionally enrolled or within a grace period in 27 states. Median vaccination coverage† was 94.5% for the state-required number of doses of DTaP; 94.0% for 2 doses of MMR; and 93.8% for 2 doses of varicella vaccine. The median percentage of kindergartners with an exemption from at least one vaccine§ was 2.0%, similar to 2015-16 (1.9%). Median grace period and provisional enrollment was 2.0%. Vaccination coverage remains consistently high and exemptions low at state and national levels. Local-level vaccination coverage data provide opportunities for immunization programs to identify schools, districts, counties, or regions susceptible to vaccine-preventable diseases and for schools to address undervaccination through implementation of existing state and local vaccination policies (1) to protect communities through increased coverage.

  15. Long-term clinical outcomes for bifurcation treatment using a provisional T-stenting and double proximal optimization technique with Absorb bioresorbable scaffolds

    Directory of Open Access Journals (Sweden)

    Р. Д. Иванченко

    2017-04-01

    Full Text Available Aim. The article presents long-term outcomes of treatment of coronary artery bifurcation lesions by using bioresorbable vascular scaffolds and provisional T-stenting combined with double proximal optimization. Methods. 14 patients aged 44-80 years (mean age 61±6 years including 8 (57.14 % males underwent endovascular treatment of coronary artery bifurcation lesions by using Absorb bioresorbable vascular scaffolds (BVS. Clinical/instrumental analysis was carried out after 23.7±4.12 months. Angiographic examination was performed in 12 cases (85.71 %. 7 patients (50 % underwent optical coherent tomography. Results. 11 patients (78.57 were free of angina during long-term follow-up. 1 patient (7.14 % developed BVS thrombosis and received a drug-eluting stent. A neointimal layer of the main branch increased during long-term follow-up to 29.23±7.82%, that of the lateral branch – up to 19.2±7.48%. Optical coherence tomography (OCT shows that all strata are fully covered with neointima, the number of strata with malappositions is minimal and the loss of the main branch diameter (16.9±4.9% is insignificant. Conclusion. The use of Absorb bioresorbable vascular scaffolds implanted by means of provisional T-stenting combined with double proximal optimization when treating coronary artery bifurcation lesions is a safe and efficient procedure.Received 2 February 2017. Accepted 10 March 2017.Financing: The study did not have sponsorship.Conflict of interest: The authors declare no conflict of interest.

  16. Effect of simulated pulpal blood flow rate on the rise in pulp chamber temperature during direct fabrication of exothermic provisional restorations.

    Science.gov (United States)

    Farah, R I

    2017-11-01

    To evaluate ex vivo the effect of several simulated pulpal blood flow rates on the change in pulp chamber temperature during direct fabrication of a provisional restoration using a polymethylmethacrylate (PMMA) resin. Fifteen noncarious human premolars were prepared for complete coverage restorations. A curved needle connected to a peristaltic pump simulated the pulp blood flow. Two K-type thermocouples connected to a digital thermometer were placed in the pulp chamber, and the assembly was placed in an incubator at 37 °C. Three provisional crowns were made for each specimen using no water flow (group 1), a 1-mL min -1 flow rate (group 2) and a 0.5-mL/min -1 flow rate (group 3). The pulp chamber temperature was recorded continuously during polymerization until the temperature increase peaked and started to decrease and reached the baseline temperature (37 °C). The temperature increase was measured for the three water flow conditions. Data were analysed statistically using descriptive statistics, repeated measures one-way analysis of variance (anova) with Greenhouse-Geisser correction and Bonferroni tests. The level of significance was set at P temperature. Groups with flow rates at 1 and 0.5 mL min -1 had a significantly lower temperature rise when compared to the group without water flow (P temperature. However, in the presence of simulated pulpal blood flow rates of 1 or 0.5 mL min -1 , the increase in pulp chamber temperature did not exceed the critical threshold (5.6 °C). © 2016 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  17. CERN Technical Training 2006: ANSYS Course Sessions (August-September 2006)

    CERN Multimedia

    Davide Vitè

    2006-01-01

    If you wish to participate in one of the following courses, please tell to your supervisor and apply electronically from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training'form available from your Departmental Secretariat or from your DTO (Departmental Training Officer). Applications will be accepted in the order in which they are received. The following ANSYS course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2006, and in collaboration with CAD-FEM AG (CH): ANSYS DesignModeler (course in French): 29-30.8.2006 (2 days) ANSYS Workbench (course in French): 12-15.9.2006 (4 days, only 3 places available) If you are interested in attending any of the above course sessions, please discuss with your supervisor and/or your DTO, and apply electronically via EDH from the course description pages that can be found at http://cta.cern.ch/cta2/f?p=300 under 'Upcoming course sessions', with th...

  18. DENSO Technical Communication Education

    Science.gov (United States)

    Isogai, Emiko; Suzuki, Takamasa

    We developed technical communication education from beginning to managerial levels to enhance communication skills necessary for engineers. The courses in this program progressed from theory to hands-on training and discussion, providing an opportunity for fact-finding and problem-solving. After the courses were completed, the engineers applied what they had learned on the job. The courses proved to be useful, satisfying participating engineers.

  19. Technical approach document

    Energy Technology Data Exchange (ETDEWEB)

    1989-12-01

    The Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, Public Law 95-604 (PL95-604), grants the Secretary of Energy the authority and responsibility to perform such actions as are necessary to minimize radiation health hazards and other environmental hazards caused by inactive uranium mill sites. This Technical Approach Document (TAD) describes the general technical approaches and design criteria adopted by the US Department of Energy (DOE) in order to implement remedial action plans (RAPS) and final designs that comply with EPA standards. It does not address the technical approaches necessary for aquifer restoration at processing sites; a guidance document, currently in preparation, will describe aquifer restoration concerns and technical protocols. This document is a second revision to the original document issued in May 1986; the revision has been made in response to changes to the groundwater standards of 40 CFR 192, Subparts A--C, proposed by EPA as draft standards. New sections were added to define the design approaches and designs necessary to comply with the groundwater standards. These new sections are in addition to changes made throughout the document to reflect current procedures, especially in cover design, water resources protection, and alternate site selection; only minor revisions were made to some of the sections. Sections 3.0 is a new section defining the approach taken in the design of disposal cells; Section 4.0 has been revised to include design of vegetated covers; Section 8.0 discusses design approaches necessary for compliance with the groundwater standards; and Section 9.0 is a new section dealing with nonradiological hazardous constituents. 203 refs., 18 figs., 26 tabs.

  20. Technical Leadership Development Program

    Science.gov (United States)

    2010-12-13

    the traditional tenets of leadership and management , systems thinking, understanding SOS issues, and thinking and acting holistically. Our research...international element 2.0 Enterprise Leadership and Management UNCLASSIFIED Contract Number: H98230-08-D-0171 DO 002. TO002, RT 004 Report No...mechanisms for leadership of the overall technical effort, for systems engineering, for requirements, management , and for systems integration. o Develop

  1. Technical training - Places available

    CERN Multimedia

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924) HR Department Electronic Design Next Session Duration Language Availability Comprehensive VHDL for FPGA Design 08-Oct-12 to 12-Oct-12 5 days English 4 places Electrostatique / Protection ESD 28-Sep-12 to 28-Sep-12 3 hours French 25 places Impacts de la suppression du plomb (RoHS) en électronique 26-Oct-12 to 26-Oct-12 8 hours French 14 places Introduction to VHDL 10-Oct-12 to 11-Oct-12 2 days English 9 places LabVIEW Real Time and FPGA 13-Nov-12 to 16-Nov-12 5 days French 5 places LabVIEW for Experts 24-Sep-12 to 28-Sep-12 5 days English 6 places LabVIEW for beginners 15-Oct-12 to 17-...

  2. Technical risks of offshore structures

    NARCIS (Netherlands)

    Klijnstra, J.; Zhang, X.; Putten, van der Sjoerd; Rockmann, C.

    2017-01-01

    Offshore areas are rough and high energy areas. Therefore, offshore constructions are prone to high technical risks. This chapter elaborates on the technical risks of corrosion and biofouling and technical risks through mechanical force. The expected lifetime of an offshore structure is to a great

  3. Assessing Students' Technical Skill Attainment

    Science.gov (United States)

    Jorgensen, Haley

    2010-01-01

    The Wisconsin Technical College System (WTCS) is working to comply with the Carl D. Perkins Career and Technical Education Improvement Act of 2006 (Perkins) to ensure that its graduates have mastered the technical skills needed by business and industry. The legislation requires that each state identify and approve program assessment strategies…

  4. Towards technical interoperability in telemedicine.

    Energy Technology Data Exchange (ETDEWEB)

    Craft, Richard Layne, II

    2004-05-01

    For telemedicine to realize the vision of anywhere, anytime access to care, the question of how to create a fully interoperable technical infrastructure must be addressed. After briefly discussing how 'technical interoperability' compares with other types of interoperability being addressed in the telemedicine community today, this paper describes reasons for pursuing technical interoperability, presents a proposed framework for realizing technical interoperability, identifies key issues that will need to be addressed if technical interoperability is to be achieved, and suggests a course of action that the telemedicine community might follow to accomplish this goal.

  5. INOPS Technical Report

    DEFF Research Database (Denmark)

    Lindholst, Andrej Christian

    This research report contains background analyses and findings from the INOPS research project. The purpose of the INOPS project was, from an international perspective, to describe, analyse and recommend different forms of contracting out and public–private co-operations within the technical area...... in Denmark, Sweden, Norway and England. The research report addresses three key research questions in a comparative perspective: 1. Why are park and road maintenance services contracted out? 2. How are park and road maintenance services contracted out? 3. What are the outcomes from contracting out park...

  6. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Sobecky, Patricia A; Taillefert, Martial

    2013-03-29

    This final technical report describes results and findings from a research project to examine the role of microbial phosphohydrolase enzymes in naturally occurring subsurface microorganisms for the purpose of promoting the immobilization of the radionuclide uranium through the production of insoluble uranium phosphate minerals. The research project investigated the microbial mechanisms and the physical and chemical processes promoting uranium biomineralization and sequestration in oxygenated subsurface soils. Uranium biomineralization under aerobic conditions can provide a secondary biobarrier strategy to immobilize radionuclides should the metal precipitates formed by microbial dissimilatory mechanisms remobilize due to a change in redox state.

  7. RADTRAN 6 Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Weiner, Ruth F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Neuhauser, Karen Sieglinde [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Heames, Terence John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); O' Donnell, Brandon M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dennis, Matthew L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  8. RADTRAN 6 technical manual.

    Energy Technology Data Exchange (ETDEWEB)

    Weiner, Ruth F.; Neuhauser, Karen Sieglinde; Heames, Terence John; O' Donnell, Brandon M.; Dennis, Matthew L.

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  9. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Wednesday 6 March TECHNICAL TRAINING SEMINAR from 9:30 to 16:45 - IT Amphitheatre - bldg. 31.3.004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars...

  10. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Joint PVSS JCOP Framework: 8 - 12.8.2005 (5 days) FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1 : 5 - 7.9.2005 (3 days, dates to be confirmed) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) MAGNE-05 - Magnétisme pour l'électrotechnique : 27 - 29.9.2005 (3 jours) LabVIEW Application Development (Intermediate I): 5 - 7.12.2005 (3 days) LabVIEW Advanced Programming (Intermediate 2): 8 - 9.12.2005 (2 days) ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

  11. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 28.6 - 1.7.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: 7 - 8.7.2005 (2 days) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.7.2005 (1 jour) FrontPage 2003 - niveau 1 : 6-7.7.2005 (2 jours) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo... Work with long documents : 6.7.2005 (afternoon) ACCES...

  12. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.7.2005 (1 jour) FrontPage 2003 - niveau 1 : 6-7.7.2005 (2 jours) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: 7 - 8.7.2005 (2 days) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo (4 mornings) EXCEL 2003 (Short Course I) - HowTo... Work ...

  13. Technical training: places available

    CERN Multimedia

    HR Department

    2007-01-01

    CERN Technical Training: Open Courses (April - June 2007) The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007:   AutoCAD 2006 - niveau 1 (course in French): 25.4.- 26.4.2007 & 2.5. - 3.5.2007 (4 days in 2 modules, 5 places available) AutoCAD 2006 - niveau 1 (course in French): 27.6.- 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, 5 places available) AutoCAD Mechanical 2006 (course in French) 21.6.-22.6.2007 (2 days, 8 places available) * NEW COURSE* Automate de securite S7 (course in French) 14.5.-16.5.2007 (3 days, 4 places available) * NEW COURSE* Automate de securite S7 (course in French): 9.5.-11.5.2007 (3 days, 4 places available) JCOP - Joint PVSS-JCOP Frameswork (course in English): 21.5.-25.5.2007 (5 days, 12 places available) JCOP - Finite State Machines in the JCOP Frameswork (course in English): 12.6.-14.6.2007 (3 days, 12 places available) LabVIEW Basics 1 (in English): 2.-4.5.2007 (3 days, 7 places ...

  14. The Conometric Concept: Coupling Connection for Immediately Loaded Titanium-Reinforced Provisional Fixed Partial Dentures-A Case Series.

    Science.gov (United States)

    Degidi, Marco; Nardi, Diego; Piattelli, Adriano

    2016-01-01

    The aim of this prospective study was to demonstrate the feasibility of the conic coupling connection as a novel approach for the retention of immediately loaded, titanium-reinforced, temporary fixed partial restorations. The patients received a fixed, immediate partial restoration, attached using the conic coupling connection to two implants placed in a fresh extraction socket. Changes in marginal peri-implant bone level or probing depth measurements, biologic or technical complications, and any other adverse event were recorded at yearly follow-ups up to 3 years after implantation. A total of 78 implants placed in 39 patients reached the 3-year follow-up. A trend of bone overgrowth over the implant platform (mean: 0.2 mm) and a complete fill of the vertical gap between the implant platform level and the first point of contact of the bone with the implant surface was seen after the 6-month follow-up. No disconnection of any prosthesis was noted during 3 years of full occlusal function. The results of this study suggest that titanium-reinforced, temporary partial restorations with conic coupling retention supported by immediate implants provide a successful, cost-effective treatment modality.

  15. A Provisional Experience with Robot-Assisted Soave Procedure for Older Children with Hirschsprung Disease: Back to the Future?

    Science.gov (United States)

    Mattioli, Girolamo; Pio, Luca; Leonelli, Lorenzo; Razore, Barbara; Disma, Nicola; Montobbio, Giovanni; Jasonni, Vincenzo; Petralia, Paolo; Pini Prato, Alessio

    2017-05-01

    Hirschsprung disease is a congenital disease characterized by intestinal aganglionosis of various extents. Most patients are younger than 1 year of age. Though, a minority of cases can be older or even adult. Older the patient the more difficult and prolonged is the endorectal dissection required for the pull-through procedure. Longer surgery leads to longer anal dilatation and trauma with subsequent higher likelihood of continence impairment. The article aims at describing the first case series of robot-assisted Soave procedure, which was adopted as an alternative minimally invasive approach to older patients with Hirschsprung disease. The technical principles are represented by intraoperative seromuscolar leveling biopsies, intracorporeal endorectal cranial dissection, and endorectal pull-through with colo-anal anastomosis. The authors report three procedures that were carried on without complication with a limited requirement for anal dilatation and trauma, given the reduced need for endorectal caudal dissection. The results demonstrate the feasibility of the proposed approach. The robotic approach should be considered as an alternative minimally invasive approach for older children or adults with Hirschsprung disease.

  16. Technical Support Essentials Advice to Succeed in Technical Support

    CERN Document Server

    Sanchez, Andrew

    2010-01-01

    Technical Support Essentials is a book about the many facets of technical support. It attempts to provide a wide array of topics to serve as points of improvement, discussion, or simply topics that you might want to learn. The topics range from good work habits to the way technical supportgroups establish their own style of work. This book applies theories, models, and concepts synthesized from existing research in other fields-such as management, economics, leadership, and psychology-and connects them to technical support. The goal is to build on the work of others and allow their success to

  17. Mechanical engineering department technical review

    Energy Technology Data Exchange (ETDEWEB)

    Carr, R.B. Denney, R.M. (eds.)

    1981-01-01

    The Mechanical Engineering Department Technical Review is published to: (1) inform the readers of various technical activities within the department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical acievements and publication abstracts. The first is divided into eight sections, one for each division in the department providing the reader with the names of the personnel and the division accomplishing the work.

  18. Mechanical Engineering Department Technical Review

    Energy Technology Data Exchange (ETDEWEB)

    Carr, R.B.; Denney, R.M. (eds.)

    1981-07-01

    The Mechanical Engineering Department Technical Review is published to inform readers of various technical activities within the Department, promote exchange of ideas, and give credit to personnel who are achieving the results. The report is presented in two parts: technical achievements and publication abstracts. The first is divided into seven sections, each of which reports on an engineering division and its specific activities related to nuclear tests, nuclear explosives, weapons, energy systems, engineering sciences, magnetic fusion, and materials fabrication.

  19. [A pilot clinical study of immediate provisionalization with a chairside computer aided design and computer aided manufacture monolithic crown for single tooth immediate implant placement].

    Science.gov (United States)

    Tian, J H; Di, P; Lin, Y; Zhang, Y; Wei, D H; Cui, H Y

    2017-01-09

    Objective: To evaluate the primary clinical outcomes of immediate provisionalization with a monolithic crown utilizing a novel chairside computer aided design and computer aided manufacture (CAD/CAM) workflow for single tooth immediate implant placement. Methods: This pilot study was a prospective within-subjects design. Thirteen consecutive patients were included and diagnosed with untreatable single incisor or premolar with fine general and local anatomical conditions. The trial was conducted at Department of Implantology, Peking University School and Hospital of Stomatology, Beijing, between January 2016 and June 2016. The teeth were extracted atraumatically and implants were immediately placed in the fresh sockets. Two screw-retained interim crowns were fabricated for the same site utilizing different workflows, a monolithic lithium disilicate (LS2) crown produced by CEREC (Sirona, Germany) chairside CAD/CAM system (CER group) and a manually fabricated resin crown utilizing conventional workflow (CONV group) respectively. The patients were blinded to the group allocation of the two interim crowns. After the clinical try-in for both crowns in a randomized sequence, the patients' level of satisfaction was assessed with a virtual analogue scale (VAS) questionnaire. The restorations chosen by patients themselves were seated in the implants by one experienced prosthodontist. The accuracy, aesthetic effect and clinical time consumption of both groups were compared. Statistical analyses were performed with the Wilcoxon signed rank test. Results: All patients were treated with atraumatic tooth extraction, immediate implant placement using flapless surgery and immediate provisionalization in a single visit. The interim crowns of both groups could be fitted with or without slight adjustments. For each patient, the interim crown of CER group was chosen to be seated with a relatively higher VAS result. The white esthetic score (WES) results demonstrated no statistically

  20. Reinforcement of acrylic resins for provisional fixed restorations. Part III: effects of addition of titania and zirconia mixtures on some mechanical and physical properties.

    Science.gov (United States)

    Panyayong, W; Oshida, Y; Andres, C J; Barco, T M; Brown, D T; Hovijitra, S

    2002-01-01

    Acrylic resins have been used in many different applications in dentistry, especially in the fabrication of provisional fixed partial dentures. Ideally, a provisional crown and bridge material should be easy to handle and should protect teeth against physical, chemical, and thermal injuries. Some of the problems associated with this use are related to the material's poor mechanical properties. It has been demonstrated that acrylic resin can be strengthened through the addition of structural component of different size distributed in the acrylic matrix, thus forming a composite structure. The purpose of this study was to investigate the addition effects of mixtures of titania (titanium dioxide, TiO(2)) powder and zirconia (zirconium dioxide, ZrO(2)) powder being incorporated with pre-polymerized beads mixed in monomer liquid, on some mechanical and physical properties of PMMA resin. The pre-polymerized powder poly(methyl methacrylate) resin was admixed with titania and zirconia powder. A mixing ratio was controlled by volume % of 0, 1.0, 2.0, and 3.0 (samples with 0 v/o served as control groups). For using mixture of titania and zirconia, total amount of the mixture was controlled by volume % of 1.0, 2.0, and 3.0, in which titania and zirconia were mixed at the ratio 1 :1, 1 :2 and 2 :1. Prior to mechanical tests, all rectangular-shaped samples (25 mm x 2 mm x 5 mm) were stored in 37 degrees C distilled water for 7 days after polishing all six sides of samples. Samples were then subjected to the three-point bending flexion test to evaluate the bending strength as well as the modulus of elasticity. Weight gain and exothermic reaction survey were investigated as well. All data were collected and analyzed with one-way analysis of variance (ANOVA) and Sidak method (p=0.05). It was found that the addition of particles generally decreased the water absorbed by the composite system. Only 1 percent by volume concentration of 1 :1 ratio and 2 percent by volume concentration

  1. The logic of Technical Standardisation

    DEFF Research Database (Denmark)

    Nedergaard, Peter

    In this paper technical standardisation is understood and explained in a model where economic analysis is coupled with an analysis of the political system as proposed in rational choice theory. The aim is to answer both the question why various countries (e.g. the United States versus European...... countries) let either the market or public intervention determine the mode of technical standardisation and the possible implications of these two ways of organizing technical standardisation from an economic and a political point of view. Based upon the analysis of the paper a couple of general policy...... recommendations are made concerning the mode of technical standardisation....

  2. ERLN Technical Support for Labs

    Science.gov (United States)

    The Environmental Response Laboratory Network provides policies and guidance on lab and data requirements, Standardized Analytical Methods, and technical support for water and radiological sampling and analysis

  3. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Eggeman, Tim [ZeaChem Inc., Lakewood, CO (United States); O' Neill, Brian [ZeaChem Inc., Lakewood, CO (United States)

    2016-08-17

    ZeaChem Inc. and US DOE successfully demonstrated the ZeaChem process for producing sugars and ethanol from high-impact biomass feedstocks. The project was executed over a 5-year period under a $31.25 million cooperative agreement (80:20 Federal:ZeaChem cost share). The project was managed by dividing it into three budget periods. Activities during Budget Period 1 were limited to planning, permitting, and other pre-construction planning. Budget Period 2 activities included engineering, procurement, construction, commissioning, start-up and initial operations through the Independent Engineer Test Runs. The scope of construction was limited to the Chem Frac and Hydrogenolysis units, as the Core Facility was already in place. Construction was complete in December 2012, and the first cellulosic ethanol was produced in February 2013. Additional operational test runs were conducted during Budget Period 3 (completed June 2015) using hybrid poplar, corn stover, and wheat straw feedstocks, resulting in the production of cellulosic ethanol and various other biorefinery intermediates. The research adds to the understanding of the Chem Frac and Hydrogenolysis technologies in that the technical performance of each unit was measured, and the resulting data and operational experience can be used as the basis for engineering designs, thus mitigating risks for deployment in future commercial facilities. The Chem Frac unit was initially designed to be operated as two-stage dilute acid hydrolysis, with first stage conditions selected to remove the hemicellulose fraction of the feedstock, and the second stage conditions selected to remove the cellulose fraction. While the Chem Frac unit met or exceeded the design capacity of 10 ton(dry)/day, the technical effectiveness of the Chem Frac unit was below expectations in its initial two-stage dilute acid configuration. The sugars yields were low, the sugars were dilute, and the sugars had poor fermentability caused by excessive inhibitors

  4. Technical Math For Dummies

    CERN Document Server

    Schoenborn, Barry

    2010-01-01

    Technical Math For Dummies is your one-stop, hands-on guide to acing the math courses you’ll encounter as you work toward getting your degree, certifacation, or�license in the skilled trades. You’ll get easy-to-follow, plain-English guidance on mathematical formulas and methods that professionals use every day in the automotive, health, construction, licensed trades, maintenance, and other trades. You’ll learn how to apply concepts of algebra, geometry, and trigonometry and their formulas related to occupational areas of study. Plus, you’ll find out how to perform basic arithmetic

  5. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    John Tanis

    2005-11-25

    This document comprises the final technical report for atomic collisions research supported by DOE grant No. DE-FG02-87ER13778 from September 1, 2001 through August 31, 2004. The research involved the experimental investigation of excitation and charge-changing processes occurring in ion-atom and ion-molecule collisions. Major emphases of the study were: (1) interference effects resulting from coherent electron emission in H2, (2) production of doubly vacant K-shell (hollow ion) states due to electron correlation, and (3) formation of long-lived metastable states in electron transfer processes. During the period of the grant, this research resulted in 23 publications, 12 invited presentations, and 39 contributed presentations at national and international meetings and other institutions. Brief summaries of the completed research are presented below.

  6. Technical Training: ELEC-2005

    CERN Multimedia

    Davide Vitè

    2005-01-01

    ELEC-2005 - Electronics in High Energy Physics: Autumn Term (November-December 2005) ELEC-2005 is a new course series on modern electronics, given by CERN physicists and engineers within the framework of the 2005 Technical Training Programme, in an extended format of the ELEC-2002 course series. This new, comprehensive course series is designed for people who are not electronics specialists, for example physicists, engineers and technicians working at or visiting the laboratory, who use or will use electronics in their present or future activities, in particular in the context of the LHC accelerator and experiments. ELEC-2005 is composed of four Terms. The Winter (Introduction to electronics in HEP), Spring (Integrated circuits and VLSI technology for physics), and Summer (System electronics for physics: Issues) Terms already took place. The Autumn Term: Electronics applications in HEP experiments (November-December, 10 lectures) is now open for online registration, and will start on November 8th with the...

  7. LLNL 1981: technical horizons

    Energy Technology Data Exchange (ETDEWEB)

    1981-07-01

    Research programs at LLNL for 1981 are described in broad terms. In his annual State of the Laboratory address, Director Roger Batzel projected a $481 million operating budget for fiscal year 1982, up nearly 13% from last year. In projects for the Department of Energy and the Department of Defense, the Laboratory applies its technical facilities and capabilities to nuclear weapons design and development and other areas of defense research that include inertial confinement fusion, nonnuclear ordnances, and particle-beam technology. LLNL is also applying its unique experience and capabilities to a variety of projects that will help the nation meet its energy needs in an environmentally acceptable manner. A sampling of recent achievements by LLNL support organizations indicates their diversity. (GHT)

  8. Technical applications of aerogels

    Energy Technology Data Exchange (ETDEWEB)

    Hrubesh, L.W.

    1997-08-18

    Aerogel materials posses such a wide variety of exceptional properties that a striking number of applications have developed for them. Many of the commercial applications of aerogels such as catalysts, thermal insulation, windows, and particle detectors are still under development and new application as have been publicized since the ISA4 Conference in 1994: e.g.; supercapacitors, insulation for heat storage in automobiles, electrodes for capacitive deionization, etc. More applications are evolving as the scientific and engineering community becomes familiar with the unusual and exceptional physical properties of aerogels, there are also scientific and technical application, as well. This paper discusses a variety of applications under development at Lawrence Livermore National Laboratory for which several types of aerogels are formed in custom sizes and shapes. Particular discussions will focus on the uses of aerogels for physics experiments which rely on the exceptional, sometimes unique, properties of aerogels.

  9. Technical Training Seminar

    CERN Document Server

    2003-01-01

    Wednesday 19 November From 9:30 to 17:30 - IT Amphitheatre bldg.31 3-004 2003 Data Transmission Design Seminar - TEXAS INSTRUMENTS The one-day 2003 Data Transmission Design Seminar is part of a series of technical seminars produced by Texas Instruments. This series of seminars will introduce system solutions based on different standards according to their respective requirements. It will include topics containing a blend of basic principles and hands-on application examples, along with layout-guidelines. • Basics and Practical Examples of Data-Transmission • Low Voltage Differential Signaling (LVDS) • Connectivity and PC-based Links • Industrial Interfaces • Parallel Bus Systems and Clock-Distribution-Circuits (CDC) This Seminar will be of interest to hardware designers and system engineers dealing with the realization of system- or board-level interfaces based on various transmission standards. Language: English Free seminar, no registration Organiser: John ...

  10. Predictors of employer satisfaction: technical and non-technical skills.

    Science.gov (United States)

    Danielson, Jared A; Wu, Tsui-Feng; Fales-Williams, Amanda J; Kirk, Ryan A; Preast, Vanessa A

    2012-01-01

    Employers of 2007-2009 graduates from Iowa State University College of Veterinary Medicine were asked to respond to a survey regarding their overall satisfaction with their new employees as well as their new employees' preparation in several technical and non-technical skill areas. Seventy-five responses contained complete data and were used in the analysis. Four technical skill areas (data collection, data interpretation, planning, and taking action) and five non-technical skill areas (interpersonal skills, ability to deal with legal issues, business skills, making referrals, and problem solving) were identified. All of the skill area subscales listed above had appropriate reliability (Cronbach's alpha>0.70) and were positively and significantly correlated with overall employer satisfaction. Results of two simultaneous regression analyses indicated that of the four technical skill areas, taking action is the most salient predictor of employer satisfaction. Of the five non-technical skill areas, interpersonal skills, business skills, making referrals, and problem solving were the most important skills in predicting employer satisfaction. Hierarchical regression analysis revealed that all technical skills explained 25% of the variation in employer satisfaction; non-technical skills explained an additional 42% of the variation in employer satisfaction.

  11. European Medicines Agency, CAT Secretariat & US Food and Drug Administration.

    Science.gov (United States)

    2011-11-01

    The European Medicines Agency (EMA) and the Committee for Advanced Therapies (CAT) are responsible for reviewing applications for marketing authorization for Advanced Therapy Medicinal Products (ATMP), which include (stem) cell-based medicines, for the ATMP classification and certification procedure, and to provide scientific advice to developers of ATMPs. The CAT, an expert committee dedicated to ATMPs, was established by the Regulation (EC) No 1394/2007 on Advanced Therapies. The CAT came into operation in January 2009. ATMPs are defined in this Regulation as gene therapy and cell therapy medicinal products, and tissue-engineered products. The US FDA's Center for Biologics Evaluation and Research is responsible for ensuring the safety, purity, potency and effectiveness of many biologically derived products, including blood intended for transfusion, blood components and derivatives, vaccines and allergenic extracts, and cell, tissue and gene therapy products for the prevention, diagnosis and treatment of human diseases, conditions or injury. Human cells or tissue intended for implantation, transplantation, infusion or transfer into a human recipient are regulated as human cells, tissues, and cellular and tissue-based products (HCT/Ps).

  12. EXECUTIVES' BEHAVIOR TYPES AND PROFESSIONAL OF SECRETARIAT'S ATTITUDE

    Directory of Open Access Journals (Sweden)

    Rosane Fontanella

    2012-05-01

    Full Text Available After the technological revolution and globalization, many professions have had an up and, consequently, they were forced to adapt to the new reality. Within this new reality, the profile of the secretarial professional evolved and developed a path of struggles and victories, changing significantly. With the change it also increased the responsibilities and challenges. Playing purely operational functions, the professional of secretarial began to think and act strategically with their executives, engaging in projects and goals and also meeting these goals. This paper shows how professionals can perform secretarial duties and manage its function to assist executives with very different behavioral types. It indicates the position that secretarial professionals need to adopt towards these types of behavior and the use of elements of Emotional Intelligence and Social Intelligence can help creating a friendly atmosphere where everyone can live in harmony.

  13. Internal contamination of a 2-component implant system after occlusal loading and provisionally luted reconstruction with or without a washer device.

    Science.gov (United States)

    Rimondini, L; Marin, C; Brunella, F; Fini, M

    2001-12-01

    Microbial internal contamination of oral implants has been suggested as being responsible for inflammatory infiltration of peri-implant tissues at the fixture-abutment interface of 2-stage and 2-component implant systems; it is also considered as a potential source of pathogens. The present in vivo study evaluated contamination of the inner abutment-implant retaining screw, after occlusal loading and provisionally-luted reconstruction with or without a washer device. Eight 2-component oral implants sealed with an o-ring silicon washer device and 9 without a seal were placed in 7 patients with high oral hygiene standards. Two months after prosthetic reconstruction, crowns and internal screws were removed, and organic and inorganic screw contamination was examined by scanning electron microscopy and energy dispersive x-ray spectroscopy (EDS) analysis. An amorphous and crystalline contamination, suggestive of calcium and phosphate compounds, was seen on all screw surfaces. Microbial contamination was more frequently observed in the unsealed group. No differences in bacterial morphotypes were observed between the sealed and unsealed implants. Cocci were the most representative morphotypes, while rods were seldom seen. In clinical situations, leakage occurs at the implant-abutment interface, although bacterial contamination is limited in patients with high oral hygiene standards. Contamination may be reduced by using a washer device.

  14. A network approach for provisional assay recognition of a Hendra virus antibody ELISA: test validation with low sample numbers from infected horses.

    Science.gov (United States)

    Colling, Axel; Lunt, Ross; Bergfeld, Jemma; McNabb, Leanne; Halpin, Kim; Juzva, Susan; Newberry, Kim; Morrissy, Chris; Loomes, Cameron; Warner, Simone; Diallo, Ibrahim; Kirkland, Peter; Broder, Christopher C; Carlile, Gemma; Loh, Mai Hlaing; Waugh, Caryll; Wright, Lynda; Watson, James; Eagles, Debbie; Zuelke, Kurt; McCullough, Sam; Daniels, Peter

    2018-02-01

    Obtaining statistically sound numbers of sera from Hendra virus (HeV)-infected horses is problematic because affected individuals usually die or are euthanized before developing a serum antibody response. As a consequence, test validation becomes a challenge. Our approach is an extension of OIE principles for provisional recognition and included 7 validation panels tested across multiple laboratories that provided estimates for test performance characteristics. At a 0.4 S/P cutoff, 16 of 19 sera from HeV-infected horses gave positive results in the HeV soluble G, indirect ELISA (HeVsG iELISA; DSe 84.2% [95% CI: 60.4-96.6%]); 463 of 477 non-infected horse sera tested negative (DSp 97.1% [95% CI: 95.1-98.4%]). The HeVsG iELISA eliminated almost all false-positive results from the previously used HeV iELISA, with marginally decreased relative sensitivity. Assay robustness was evaluated in inter-laboratory and proficiency testing panels. The HeVsG iELISA is considered to be fit for purpose for serosurveillance and international movement of horses when virus neutralization is used for follow-up testing of positive or inconclusive serum samples.

  15. Immediate loading of maxillary prostheses using flapless surgery, implant placement in predetermined positions, and prefabricated provisional restorations. Part 2: a retrospective 10-year clinical study.

    Science.gov (United States)

    Rocci, Antonio; Rocci, Marta; Scoccia, Andrea; Martignoni, Massimiliano; Gottlow, Jan; Sennerby, Lars

    2012-01-01

    Immediate loading has become a widely reported practice in implant dentistry. The aim of this study is to report on the 10-year clinical and radiographic outcomes of an immediate-loading treatment protocol that included flapless surgery. Forty-six patients were treated with 97 immediately loaded Mk IV implants (Nobel Biocare) with machined surface in the maxilla. Presurgically, a three-dimensional model of each patient's soft tissue and underlying alveolar bone anatomy was created and a surgical template was fabricated. A circular mucotome was used to punch out a 5-mm hole in the mucosa to avoid flap elevation. Control examinations were performed on the day of surgery and at 1, 2, 3, 6, 8, and 10 years after surgery. All prepared implant sites had intact buccal and lingual bone walls. The prefabricated provisional restorations showed excellent fit. Nine implants failed within 8 weeks of loading, resulting in a cumulative survival rate of 91% after 10 years of loading. The survival rates were 94% for implants supporting partial prostheses and 81% for implants supporting single restorations. Average marginal bone resorption was 1 mm during the first year, 0.4 mm during the second year, and 0.1 mm during the third year and after 10 years. The unchanged survival rate and the low average bone loss after 10 years confirm the feasibility of an immediate loading treatment protocol in the maxilla that included flapless surgery.

  16. Effects of connective tissue grafting on the facial gingival level following single immediate implant placement and provisionalization in the esthetic zone: a 1-year randomized controlled prospective study.

    Science.gov (United States)

    Yoshino, Shuji; Kan, Joseph Y K; Rungcharassaeng, Kitichai; Roe, Phillip; Lozada, Jaime L

    2014-01-01

    This 1-year randomized controlled prospective study evaluated the implant success rate and peri-implant tissue response following single immediate implant placement and provisionalization (IIPP) with and without subepithelial connective tissue graft (SCTG) in the esthetic zone. Implants were placed either IIPP with SCTG (test group) or IIPP without SCTG (control group). The implants were evaluated both clinically and radiographically before surgery, immediately after implant placement, and 3, 6, and 12 months after implant placement. Data were analyzed using Friedman, Wilcoxon signed-rank, and Mann-Whitney U tests at the significance level of α = .05. Twenty implants (10 test, 10 control) were placed in 20 patients (7 men, 13 women) between the ages of 27 and 87 (mean age, 52.6 years). At 1 year, all implants remained osseointegrated, with overall mean marginal bone changes of -0.01 mm and -0.14 mm for the test and control groups, respectively. Mean facial gingival level change was significantly more pronounced in the control group (-0.70 mm) than in the test group (-0.25 mm). The modified Plaque Index scores showed that patients were able to maintain a good level of hygiene throughout the study. At 1 year, the Papilla Index indicated that more than 50% papilla fill was observed in 75% of the test sites and 80% of the control sites. Within the limitations of this study, SCTG was shown to be beneficial in maintaining facial gingival level when performed in conjunction with IIPP procedures.

  17. Machinic Deconstruction : literature/ politics/ technics

    NARCIS (Netherlands)

    Ieven, Bram Koen

    2007-01-01

    Taking its cue from Jacques Derrida’s concept of différance, Machinic Deconstruction: Literature / Politics / Technics addresses the question whether it is possible to conceive of a work of technics that is operative at the same quasi-ontological level as différance itself. To do so, this study

  18. Teaching Technical Writing in Canada.

    Science.gov (United States)

    Eldridge, Elaine

    1990-01-01

    Reports the 1987 survey results of 70 Canadian colleges and universities regarding technical writing programs. Finds that half of the 35 responding institutions offer professional writing courses and that faculty attitudes range from enthusiastic to disapproving. Reveals that faculties at nonoffering institutions do not view technical writing as a…

  19. Technical Education and Economic Growth

    Indian Academy of Sciences (India)

    First page Back Continue Last page Graphics. Technical Education and Economic Growth. Technical Education and Economic Growth. Review of the Present Status. Expanding no.s and impairment of quality; Faculty shortage; Grim situation at Masters and PhD levels; Regional imbalance; Absence of International flavour ...

  20. The Digital technical documentation handbook

    CERN Document Server

    Schultz, Susan I; Kavanagh, Frank X; Morse, Marjorie J

    1993-01-01

    The Digital Technical Documentation Handbook describes the process of developing and producing technical user information at Digital Equipment Corporation. * Discusses techniques for making user information _more effective * Covers the draft and reviewprocess, the production and distribution of printed and electronic media, archiving, indexing, testing for usability, and many other topics * Provides quality assurance checklists, contains a glossary and a bibliography of resources for technicalcommunicators

  1. COMPASS Accelerator Design Technical Overview

    Energy Technology Data Exchange (ETDEWEB)

    Nanni, Emilio; Dolgashev, Valery; Tantawi, Sami; Neilson, Jeff; /SLAC

    2016-03-14

    This report is a survey of technical options for generating a MeV-class accelerator for space based science applications. The survey was performed focusing on the primary technical requirements of the accelerator in the context of a satellite environment with its unique challenges of limited electrical power (PE), thermal isolation, dimensions, payload requirement and electrical isolation.

  2. Hanford Site technical baseline database

    Energy Technology Data Exchange (ETDEWEB)

    Porter, P.E., Westinghouse Hanford

    1996-05-10

    This document includes a cassette tape that contains the Hanford specific files that make up the Hanford Site Technical Baseline Database as of May 10, 1996. The cassette tape also includes the delta files that delineate the differences between this revision and revision 3 (April 10, 1996) of the Hanford Site Technical Baseline Database.

  3. Hanford Site technical baseline database

    Energy Technology Data Exchange (ETDEWEB)

    Porter, P.E.

    1996-09-30

    This document includes a cassette tape that contains the Hanford specific files that make up the Hanford Site Technical Baseline Database as of September 30, 1996. The cassette tape also includes the delta files that dellinate the differences between this revision and revision 4 (May 10, 1996) of the Hanford Site Technical Baseline Database.

  4. In silico comparison of the reproducibility of full-arch implant provisional restorations to final restoration between a 3D Scan/CAD/CAM technique and the conventional method.

    Science.gov (United States)

    Mino, Takuya; Maekawa, Kenji; Ueda, Akihiro; Higuchi, Shizuo; Sejima, Junichi; Takeuchi, Tetsuo; Hara, Emilio Satoshi; Kimura-Ono, Aya; Sonoyama, Wataru; Kuboki, Takuo

    2015-04-01

    The aim of this article was to investigate the accuracy in the reproducibility of full-arch implant provisional restorations to final restorations between a 3D Scan/CAD/CAM technique and the conventional method. We fabricated two final restorations for rehabilitation of maxillary and mandibular complete edentulous area and performed a computer-based comparative analysis of the accuracy in the reproducibility of the provisional restoration to final restoration between a 3D scanning and CAD/CAM (Scan/CAD/CAM) technique and the conventional silicone-mold transfer technique. Final restorations fabricated either by the conventional or Scan/CAD/CAM method were successfully installed in the patient. The total concave/convex volume discrepancy observed with the Scan/CAD/CAM technique was 503.50mm(3) and 338.15 mm(3) for maxillary and mandibular implant-supported prostheses (ISPs), respectively. On the other hand, total concave/convex volume discrepancy observed with the conventional method was markedly high (1106.84 mm(3) and 771.23 mm(3) for maxillary and mandibular ISPs, respectively). The results of the present report suggest that Scan/CAD/CAM method enables a more precise and accurate transfer of provisional restorations to final restorations compared to the conventional method. Copyright © 2014 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  5. Tipología de las bibliotecas argentinas desde el período hispánico hasta 1830: Una primera clasificación provisional Typology of the Argentine Libraries since the Hispanic Period to 1830: A First Provisional Classification

    Directory of Open Access Journals (Sweden)

    Alejandro E. Parada

    2003-12-01

    Full Text Available El presente artículo intenta trazar una breve clasificación de los distintos «tipos» de bibliotecas existentes en el actual territorio argentino durante la dominación hispánica hasta el año 1830. La tipología adoptada es, ante todo, una aproximación provisional y ampliamente perfectible. La contribución se dirige, en líneas generales, a quienes se inician en el estudio de la «Historia del libro, de las bibliotecas y de la lectura» en la Argentina. En este sentido, la bibliografía citada intenta suplir la falta de guías de estudio sobre esta temática. Las bibliotecas identificadas son las siguientes: de instituciones o corporaciones religiosas, particulares, pública catedralicia, pública conventual, pública, de sociedades de extranjeros (societarias, de institutos de enseñanza, circulantes (y gabinetes de lectura, y por encargo u ofrecidas por negociantes.This article tries to outline a brief classification of the different types of existing libraries in the present Argentine territory since the Hispanic domination to 1830. The typology adopted is, above all, a provisional approach greatly rectifiable. The contribution is aimed, in general terms, to whom start the study of the history of the books, libraries, and reading in Argentina. In that sense, the quoted bibliography tries to substitute the lack of study guides on the subject. The identified libraries belong to: institutions or religious corporations; private individuals; foreigners societies (i.e.: belonging to a society; educational institutes; and cathedral public libraries; conventual public libraries; public libraries; circulating libraries (and reading rooms; and libraries made to order or offered by businessmen.

  6. Technical planning activity: Final report

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    In April 1985, the US Department of Energy's (DOE's) Office of Fusion Energy commissioned the Technical Planning Activity (TPA). The purpose of this activity was to develop a technical planning methodology and prepare technical plans in support of the strategic and policy framework of the Magnetic Fusion Program Plan issued by DOE in February 1985. Although this report represents the views of only the US magnetic fusion community, it is international in scope in the sense that the technical plans contained herein describe the full scope of the tasks that are prerequisites for the commercialization of fusion energy. The TPA has developed a well-structured methodology that includes detailed definitions of technical issues, definitions of program areas and elements, statements of research and development objectives, identification of key decision points and milestones, and descriptions of facility requirements.

  7. En busca de los resultados de la cooperación técnica In search of the results of technical cooperation

    Directory of Open Access Journals (Sweden)

    Lily Jourdan Hidalgo

    1999-06-01

    Full Text Available For the Pan American Health Organization (PAHO, technical cooperation (TC is the process by which the PAHO Member States work with the Organization, as equal partners, to identify and reach their own health goals and to promote self-sufficiency in health development, through programs that respond to those countries’ needs and national priorities. Since 1978, PAHO has used the American Regional Planning, Programming, Monitoring, and Evaluation System (AMPES to establish management procedures and to facilitate decision-making in health TC. As part of AMPES, PAHO uses a "logical approach to project management" to structure the work program of the Organization and to identify the expected results from TC activities and TC resource investments. This project management approach, which replaces the "functional approaches" system used to date, also helps establish a causative relationship between the programmed activities and the results that PAHO expects, and between the activities and the hoped-for outcomes in the countries. As part of an ongoing process of rethinking international health TC, several years ago PAHO began a four-phase study on the usefulness and validity of functional approaches and on the need to propose new ones or to modify existing ones. The results of the initial phase showed it was difficult to classify the activities because the functionalapproaches categories were not mutually exclusive and the TC activities were complex. Further, the expected results did not specify the product for which the PAHO Secretariat was accountable within a certain time frame nor the Secretariat’s level of responsibility. Thus, a new and more flexible classification of expected results was proposed, with the following categories: cooperation networks and alliances; surveillance and information systems; standards and guidelines; research and evaluation studies; plans, projects, and policies; methods, models, and technologies; training programs

  8. A vigilância epidemiológica e a perspectiva de trabalho no território: Secretaria Municipal de Saúde - Ribeirão Preto La vigilancia epidemiológica y la perspectiva de trabajo en el territorio: secretaria municipal de salud de Ribeirão Preto Epidemiological surveillance and the perspective of working in the territory: Ribeirão Preto Municipal Health Secretariat

    Directory of Open Access Journals (Sweden)

    Tereza Cristina Scatena Villa

    2002-01-01

    acciones de la Vigilancia Epidemiológica están relacionadas con la perspectiva de un trabajo en el territorio en la construcción de la Vigilancia en la Salud, asegurando el contenido técnico de esas acciones y la participación de diferentes categorías profesionales en un mismo proyecto de trabajo que no necesita ser ejecutada por todos los profesionales en el proceso de producción, espacio y tiempo.This study aimed at analyzing the conformation of the Epidemiological Surveillance Service in Ribeirão Preto Municipal Health Secretariat under the orientation of the principles established by the Unified Health System and the perspective of Health Surveillance in face of the health care municipalization process occurring in the 1990s through the following dimensions: territory; problems; intersectoriality based on positive health concepts and on the paradigm of social health production. By means of a qualitative approach, bibliographical and documentation sources as well as 17 semi-structured interviews were used. Data were analyzed through the thematic analysis technique by which the following themes were identified: from "Monitoring" to "Educating and Preventing": practice in Epidemiological Surveillance -- a proposal to work in the territory. It was concluded that the potentiality of actions related to Epidemiological Surveillance is associated with the perspective of working in the territory for the construction of Health Surveillance in order to assure the technical content of those actions as well as the participation of different professional categories in the same work project, which will not necessarily be performed by all professionals in the same health production process, territory or time.

  9. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Dmitriy Y. Anistratov; Marvin L. Adams; Todd S. Palmer; Kord S. Smith; Kevin Clarno; Hikaru Hiruta; Razvan Nes

    2003-08-04

    OAK B202 Final Technical Report. The present generation of reactor analysis methods uses few-group nodal diffusion approximations to calculate full-core eigenvalues and power distributions. The cross sections, diffusion coefficients, and discontinuity factors (collectively called ''group constants'') in the nodal diffusion equations are parameterized as functions of many variables, ranging from the obvious (temperature, boron concentration, etc.) to the more obscure (spectral index, moderator temperature history, etc.). These group constants, and their variations as functions of the many variables, are calculated by assembly-level transport codes. The current methodology has two main weaknesses that this project addressed. The first weakness is the diffusion approximation in the full-core calculation; this can be significantly inaccurate at interfaces between different assemblies. This project used the nodal diffusion framework to implement nodal quasidiffusion equations, which can capture transport effects to an arbitrary degree of accuracy. The second weakness is in the parameterization of the group constants; current models do not always perform well, especially at interfaces between unlike assemblies. The project developed a theoretical foundation for parameterization and homogenization models and used that theory to devise improved models. The new models were extended to tabulate information that the nodal quasidiffusion equations can use to capture transport effects in full-core calculations.

  10. FINAL TECHNICAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    STEFAN VASILE; ZHENG LI

    2010-06-17

    High-resolution tracking detectors based on Active Pixel Sensor (APS) have been valuable tools in Nuclear Physics and High-Energy Physics research, and have contributed to major discoveries. Their integration time, radiation length and readout rate is a limiting factor for the planed luminosity upgrades in nuclear and high-energy physics collider-based experiments. The goal of this program was to demonstrate and develop high-gain, high-resolution tracking detector arrays with faster readout, and shorter radiation length than APS arrays. These arrays may operate as direct charged particle detectors or as readouts of high resolution scintillating fiber arrays. During this program, we developed in CMOS large, high-resolution pixel sensor arrays with integrated readout, and reset at pixel level. Their intrinsic gain, high immunity to surface and moisture damage, will allow operating these detectors with minimal packaging/passivation requirements and will result in radiation length superior to APS. In Phase I, we designed and fabricated arrays with calorimetric output capable of sub-pixel resolution and sub-microsecond readout rate. The technical effort was dedicated to detector and readout structure development, performance verification, as well as to radiation damage and damage annealing.

  11. Technical Training Seminar

    CERN Multimedia

    2003-01-01

    Thursday 4 September From 14:00 to 17:00 - Training Centre Auditorium bldg. 593, room 11 The Summit Design VisualElite 4.0 Release Jean Marie St Paul / SUMMIT DESIGN, Europe, Technical Manager Michel Delcroix / SUMMIT DESIGN, Southern Europe, Sales F-95015 CERGY PONTOISE, France Summit Design is an important EDA digital hardware design tool supplier, and the industry leader in the emerging Electronic System Level design domain. Its VisualElite program has been used at CERN for several years. This seminar will include the highlights of the program's latest release. It will be illustrated how Summit Design products can provide a high-level C/C++ and SystemC functional modelling design and verification environment, enabling engineers to analyse system concepts before the implementation stage. The seminar will show how mixed SystemC and HDL simulation can be done, along with solutions for hardware/software development. • HDL new features: Connectivity Table Editor. Xemacs full integration. New NCsi...

  12. Technical Training Seminar

    CERN Multimedia

    2003-01-01

    Thursday 4 September From 14:00 to 17:00 - Training Centre Auditorium bldg. 593, room 11 The Summit Design VisualElite 4.0 Release Jean Marie St Paul / SUMMIT DESIGN, Europe, Technical Manager Michel Delcroix / SUMMIT DESIGN, Southern Europe, Sales F-95015 CERGY PONTOISE, France Summit Design is an important EDA digital hardware design tool supplier, and the industry leader in the emerging Electronic System Level design domain. Its VisualElite program has been used at CERN for several years. This seminar will include the highlights of the program's latest release. It will be illustrated how Summit Design products can provide a high-level C/C++ and SystemC functional modelling design and verification environment, enabling engineers to analyse system concepts before the implementation stage. The seminar will show how mixed SystemC and HDL simulation can be done, along with solutions for hardware/software development. • HDL new features: Connectivity Table Editor. Xemacs full integration. New NCsim ...

  13. GEM Technical Design Report

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-31

    The GEM collaboration was formed in June 1991 to develop a major detector for the SSC. The primary physics objectives of GEM are those central to the motivation for the SSC, to study high p{sub T} physics - exemplified by the search for Higgs bosons - and to search for new physics beyond the standard model. The authors present in this Technical Design Report (TDR) a detector with broad capabilities for the discovery and subsequent study of electroweak symmetry breaking, the origin of mass and flavor, and other physics requiring precise measurements of gammas, electrons, and muons - hence the name, GEM. In addition, as a design goal, they have taken care to provide the robustness needed to do the physics that requires high luminosity. Finally, good coverage and hermeticity allow the detection of missing transverse energy, E{sub T}. The GEM design emphasizes clean identification and high resolution measurement of the primary physics signatures for high p{sub T} physics. The approach is to make precise energy measurements that maximize the sensitivity to rare narrow resonances, to detect the elementary interaction products (quarks, leptons, and photons), and to build in the features required to reduce backgrounds.

  14. AIMES Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Katz, Daniel S [Univ. of Illinois, Urbana-Champaign, IL (United States). National Center for Supercomputing Applications (NCSA); Jha, Shantenu [Rutgers Univ., New Brunswick, NJ (United States); Weissman, Jon [Univ. of Minnesota, Minneapolis, MN (United States); Turilli, Matteo [Rutgers Univ., New Brunswick, NJ (United States)

    2017-01-31

    This is the final technical report for the AIMES project. Many important advances in science and engineering are due to large-scale distributed computing. Notwithstanding this reliance, we are still learning how to design and deploy large-scale production Distributed Computing Infrastructures (DCI). This is evidenced by missing design principles for DCI, and an absence of generally acceptable and usable distributed computing abstractions. The AIMES project was conceived against this backdrop, following on the heels of a comprehensive survey of scientific distributed applications. AIMES laid the foundations to address the tripartite challenge of dynamic resource management, integrating information, and portable and interoperable distributed applications. Four abstractions were defined and implemented: skeleton, resource bundle, pilot, and execution strategy. The four abstractions were implemented into software modules and then aggregated into the AIMES middleware. This middleware successfully integrates information across the application layer (skeletons) and resource layer (Bundles), derives a suitable execution strategy for the given skeleton and enacts its execution by means of pilots on one or more resources, depending on the application requirements, and resource availabilities and capabilities.

  15. Bulletin Survey: Technical clarifications

    CERN Multimedia

    2002-01-01

    In the latest of our articles on the results of the Bulletin survey, we respond to some of your technical comments on the Electronic Bulletin. Many thanks to the more than 500 of you who completed the questionnaire. The full statistics will be published next week. 'It takes too long to download the pages' Yes, it's true that the Electronic Bulletin's download time isn't perfect but it will improve when the Bulletin migrates to another, faster database. 'I find it very difficult to locate all the articles' Some people experience difficulty negotiating their way through the Bulletin once they have entered a specific section. The blue column on the left contains an 'In this issue' link taking you to the other sections. What's more, the whole of the paper Bulletin is available in the electronic version. As the latter is relatively new, however, it will take a bit of time to get used to browsing through it. Many of you say that it's still too early to form an opinion. 'Pull-down menus would be good, so that yo...

  16. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    Davide VITÈ

    2002-01-01

    Wednesday 6 March   from 9:30 to 16:45 - IT Auditorium - bldg. 31 3-004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars pages here or con...

  17. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Wednesday 6 March from 9:30 to 16:45 - IT Auditorium - bldg. 31 3-004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars pages here or contact the organiser.

  18. Waste Management Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Buckingham, J.S. [ed.

    1967-08-31

    This Manual has been prepared to provide a documented compendium of the technical bases and general physical features of Isochem Incorporated`s Waste Management Program. The manual is intended to be used as a means of training and as a reference handbook for use by personnel responsible for executing the Waste Management Program. The material in this manual was assembled by members of Isochem`s Chemical Processing Division, Battelle Northwest Laboratory, and Hanford Engineering Services between September 1965 and March 1967. The manual is divided into the following parts: Introduction, contains a summary of the overall Waste Management Program. It is written to provide the reader with a synoptic view and as an aid in understanding the subsequent parts; Feed Material, contains detailed discussion of the type and sources of feed material used in the Waste Management Program, including a chapter on nuclear reactions and the formation of fission products; Waste Fractionization Plant Processing, contains detailed discussions of the processes used in the Waste Fractionization Plant with supporting data and documentation of the technology employed; Waste Fractionization Plant Product and Waste Effluent Handling, contains detailed discussions of the methods of handling the product and waste material generated by the Waste Fractionization Plant; Plant and Equipment, describes the layout of the Waste Management facilities, arrangement of equipment, and individual equipment pieces; Process Control, describes the instruments and analytical methods used for process control; and Safety describes process hazards and the methods used to safeguard against them.

  19. Technical training - Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 16.5.2006 (May-November course sessions) Technical Training: Places available The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language ACROBAT 7.0 : Utilisation de fichiers PDF 8 8.05.06 F WORD 2003 - niveau 2 : ECDL 16 22-23.05.06 23-24.05.06 F Comprehensive VHDL for FPGA Design 40 29.05-2.06.06 E C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls 32 30.05-2.06.06 E ACROBAT 7.0 : Utilisation de fichiers PDF 24 7-9.06.06 E AutoCAD Mechanical 2006 16 13-14.06.06 F CERN EDMS for Local Administrators 16 13-14.06.06 E LabVIEW Base 2 32 27.06-5.07.06 F C++ Programming Part 3 - Templates and the STL (Standard Template Library) 16 27-28.06.06 E C++ Programming Part 4 - Exceptions 8 29.06.06 E FrontPage 2003 - niveau 1 16 29-...

  20. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Stoessel, Chris

    2013-11-13

    This project developed a new high-performance R-10/high SHGC window design, reviewed market positioning and evaluated manufacturing solutions required for broad market adoption. The project objectives were accomplished by: identifying viable technical solutions based on modeling of modern and potential coating stacks and IGU designs; development of new coating material sets for HM thin film stacks, as well as improved HM IGU designs to accept multiple layers of HM films; matching promising new coating designs with new HM IGU designs to demonstrate performance gains; and, in cooperation with a window manufacturer, assess the potential for high-volume manufacturing and cost efficiency of a HM-based R-10 window with improved solar heat gain characteristics. A broad view of available materials and design options was applied to achieve the desired improvements. Gated engineering methodologies were employed to guide the development process from concept generation to a window demonstration. The project determined that a slightly de-rated window performance allows formulation of a path to achieve the desired cost reductions to support end consumer adoption.

  1. Technical Training: Places available

    CERN Document Server

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: PowerPoint 2003 (F) : 25.4.2005 (1 jour) WORD 2003 - niveau 1 : 2 & 3.5.2005 (2 jours) FrontPage 2003 - niveau 1 : 9 & 10.5.2005 (2 jours) ANSYS Workbench (F) : 9 - 12.5.2005 (4 jours) ELEC-2005 - Summer Term: System electronics for physics - Issues : 10, 12, 17, 19, 24, 26 & 31.5.2005 (7 x 2h lectures) AutoCAD 2005 - niveau 1 : 11, 12, 18, 19.5.2005 (4 jours) ACCESS 2003 - Level 1: ECDL M5 : 11 & 12.5.2005 (2 days) La technique du vide : 12 & 13.5.2005 (2 jours) Finite State Machines in the JCOP Framework: 24 - 26.5.2005 (3 days) The Joint PVSS JCOP Framework: 30.5 - 3.6.2005 (5 days) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) Introduction to ANSYS: 21 - 24.6.2005 (4 days) ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 tech...

  2. Bibliography - Technical Reports, Special Reports, and Technical Notes, FY 1981.

    Science.gov (United States)

    1982-03-01

    AD-A113 798 NAVY PERSONNEL RESEARCH AND DEVELOPMENT CENTER SAN D--ETC F/6 5/9 BIBLIOGRAPHY - TECHNICAL REPORTS. SPECIAL REPORTS. AND TECHNICA-ETC( U ...TH4IS PAGE ( MOM , Dole gnto,.d) FOREWORD This report lists all technical reports, special reports, and technical notes that were published by this Center...TR 81-16. July 1981. J. I. Borack and K. W. Gay . (AD-A102 910) A new computerized management system, the structured accession planning (STRAP) system

  3. TECHNICAL CULTURE AND HUMAN AXJOSPHERE

    Directory of Open Access Journals (Sweden)

    ­Krystyna Chałas

    2014-11-01

    Full Text Available Technical culture is the value of each historical period. It is the subject of the ongoing development. While it is a value which is associated with different categories of values, mainly material, cognitive, social. Between culture and these three categories of values ​ there is a cognitive effect. Technical culture determines the quality of human axjosphere. The aim of this study is to show the relationships and dependencies between technical culture and the structures in which a person lives and works. It is mainly about the answer to the question of which values of technical culture are closely related to and what are the inter dependencies? The primary task is to define the concept of the technical culture and to show its teaching essence. The second task boils down to indicate the range of values ​​inherent in the culture of technology, determining the value of the technological culture and values, which are developed by the technical culture. Indication of the interaction between the technical culture and values ​​is the third task.

  4. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Aristos Aristidou Natureworks); Robert Kean (NatureWorks); Tom Schechinger (IronHorse Farms, Mat); Stuart Birrell (Iowa State); Jill Euken (Wallace Foundation & Iowa State)

    2007-10-01

    The two main objectives of this project were: 1) to develop and test technologies to harvest, transport, store, and separate corn stover to supply a clean raw material to the bioproducts industry, and 2) engineer fermentation systems to meet performance targets for lactic acid and ethanol manufacturers. Significant progress was made in testing methods to harvest corn stover in a “single pass” harvest mode (collect corn grain and stover at the same time). This is technically feasible on small scale, but additional equipment refinements will be needed to facilitate cost effective harvest on a larger scale. Transportation models were developed, which indicate that at a corn stover yield of 2.8 tons/acre and purchase price of $35/ton stover, it would be unprofitable to transport stover more than about 25 miles; thus suggesting the development of many regional collection centers. Therefore, collection centers should be located within about 30 miles of the farm, to keep transportation costs to an acceptable level. These collection centers could then potentially do some preprocessing (to fractionate or increase bulk density) and/or ship the biomass by rail or barge to the final customers. Wet storage of stover via ensilage was tested, but no clear economic advantages were evident. Wet storage eliminates fire risk, but increases the complexity of component separation and may result in a small loss of carbohydrate content (fermentation potential). A study of possible supplier-producer relationships, concluded that a “quasi-vertical” integration model would be best suited for new bioproducts industries based on stover. In this model, the relationship would involve a multiyear supply contract (processor with purchase guarantees, producer group with supply guarantees). Price will likely be fixed or calculated based on some formula (possibly a cost plus). Initial quality requirements will be specified (but subject to refinement).Producers would invest in harvest

  5. Field convergence between technical writers and technical translators

    DEFF Research Database (Denmark)

    Gnecchi, M.; Maylath, B.; Mousten, Birthe

    2011-01-01

    As translation of technical documents continues to grow rapidly and translation becomes more automated, the roles of professional communicators and translators appear to be converging. This paper updates preliminary findings first presented at the 2008 International Professional Communication...

  6. RAMP 2005 technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-04-26

    This technical report provided details of all monitoring activities conducted by the Regional Aquatics Monitoring Program (RAMP), which was initiated in 1997 to examine the impacts of oil sands mining development on aquatic systems in the region. RAMP's objective is to integrate aquatic monitoring activities in order to identify long-term trends and regional issues related to the environment in the Regional Municipality of Wood Buffalo. In 2005, RAMP focused on key components of boreal aquatic ecosystems. This report provided full outlines of all climate and hydrology monitoring activities; water and sedimentation analyses; and studies of benthic communities in rivers, lakes, and deltas. Sets of measurements endpoints were used to represent the health and integrity of valued environmental resources. Satellite imager was used to estimate activities related to oil sands developments. The report was divided into subsections which related monitoring activities for various rivers and tributaries in the region. Small and negligible calculated changes were observed in hydrologic conditions in the Athabasca River mainstem. No discernible changes in water and sediment quality were observed that could positively be ascribed to oil sands developments in the region. Very little evidence suggested that fish populations had changed as a result of increased activities in the region. The influence of oil sands development activities on the aquatic resources of the Athabasca River mainstem were minor and mostly undetectable. The results of fish tissue studies from the lower Athabasca River showed that concentrations of mercury in fish tissues occurred at levels that posed a high risk to subsistence fishers. A higher number of metal concentrations in some lakes in the region was attributed to natural causes. The results of a sentinel species monitoring program conducted at the Ells River watershed were also included. Recommendations for further refining RAMP programs were also

  7. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Juan Camilo Serrano

    2011-12-16

    New and novel material and process technologies applied in wind blade designs and production are critical to increasing the competitiveness of wind power generation against traditional sources of energy. In this project, through collaboration between PPG Industries and MAG Industrial Automation Systems, the potential of using automated manufacturing for the production of fiber glass composite wind blades was evaluated from both technical and economic points of view. Further, it was demonstrated that by modifying the standard blade raw material forms through the use of cost effective pre-impregnated rovings coupled with using an automated fiber placement machine to lay up the parts, it is possible to produce state of the art composite laminates with significantly improved mechanical performance and with higher processing rates than standard blade production technology allows for today, thereby lowering the cost of energy over turbine blades made using traditional processes and materials. In conformity with the scope of work of the submitted proposal, the project team completed each task and documented and reported its findings on the appropriate quarterly report submitted to the DOE project team. The activities and this report are divided into 5 subtasks: (1) Material Investigation - Reviews traditional materials and key specifications and testing methods; (2) Manufacturing and Automation - Identifies new candidate material forms and automated layup processes; (3) Process Development - Performs trials of candidate materials and processes; (4) Predictive Analysis - Assesses impact of new material forms and automated processes on a model blade design; and (5) Feasibility Assessment - Compares traditional manufacturing processes and materials to new candidate material forms and automated processes.

  8. Using Technical Performance Measures

    Science.gov (United States)

    Garrett, Christopher J.; Levack, Daniel J. H.; Rhodes, Russel E.

    2011-01-01

    All programs have requirements. For these requirements to be met, there must be a means of measurement. A Technical Performance Measure (TPM) is defined to produce a measured quantity that can be compared to the requirement. In practice, the TPM is often expressed as a maximum or minimum and a goal. Example TPMs for a rocket program are: vacuum or sea level specific impulse (lsp), weight, reliability (often expressed as a failure rate), schedule, operability (turn-around time), design and development cost, production cost, and operating cost. Program status is evaluated by comparing the TPMs against specified values of the requirements. During the program many design decisions are made and most of them affect some or all of the TPMs. Often, the same design decision changes some TPMs favorably while affecting other TPMs unfavorably. The problem then becomes how to compare the effects of a design decision on different TPMs. How much failure rate is one second of specific impulse worth? How many days of schedule is one pound of weight worth? In other words, how to compare dissimilar quantities in order to trade and manage the TPMs to meet all requirements. One method that has been used successfully and has a mathematical basis is Utility Analysis. Utility Analysis enables quantitative comparison among dissimilar attributes. It uses a mathematical model that maps decision maker preferences over the tradeable range of each attribute. It is capable of modeling both independent and dependent attributes. Utility Analysis is well supported in the literature on Decision Theory. It has been used at Pratt & Whitney Rocketdyne for internal programs and for contracted work such as the J-2X rocket engine program. This paper describes the construction of TPMs and describes Utility Analysis. It then discusses the use of TPMs in design trades and to manage margin during a program using Utility Analysis.

  9. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Joseph Junker; Greg Wheeler

    2007-02-26

    Since 1986 the Oregon State University Industrial Assessment Center (OSU IAC) has worked to increase the energy efficiency, productivity, sustainability, and competitiveness of US manufacturers; provide engineering students an education not available in the classroom; keep engineering faculty in contact with technology and challenges in Northwest industry; and reduce dependence on nonrenewable energy resources, both imported and domestic. Project Objective: Over the duration of this project (2002-2006), the OSU IAC worked to directly support and influence industrial decisions primarily regarding energy but also regarding sustainability and profitability through: Assessments & Follow-up: The OSU IAC performed 111 Industrial Assessments in Oregon, Washington, Idaho and Nevada to help industry identify and implement opportunities to increase energy efficiency, productivity, sustainability, and competitiveness Workshops Seminars Forums Etc: OSU IAC staff worked with regional peers to offer appropriate workshops and trainings as opportunities availed themselves. Graduating Excellent Energy Aware Professional Alumni: As technically capable, skilled written and verbal communicators, our alumni contributed to OSU IAC influence from their positions within industry, consulting organizations, utilities, and governmental and non governmental agencies. Tool Development: Analysis tools and guides originated at the OSU IAC extended our reach. The center continually worked to develop computer based analysis tools, evaluation checklists, analysis guide sheets for internal use and general sharing with industry, energy, and other professionals to assist them in efforts to improve US Industry. Impact: Over 20 years of activity the OSU IAC has typically performed 25 Industrial Assessments a year. On average, each year of 25 assessments has resulted in implemented projects that saved industry a total of: 25.3 TBTU in annual energy and $4.5 Million annually, with an average investment

  10. CTBT technical issues handbook

    Energy Technology Data Exchange (ETDEWEB)

    Zucca, J.J. [ed.

    1994-05-01

    The purpose of this handbook is to give the nonspecialist in nuclear explosion physics and nuclear test monitoring an introduction to the topic as it pertains to a Comprehensive Test Ban Treaty (CTBT). The authors have tried to make the handbook visually oriented, with figures paired to short discussions. As such, the handbook may be read straight through or in sections. The handbook covers four main areas and ends with a glossary, which includes both scientific terms and acronyms likely to be encountered during CTBT negotiations. The following topics are covered: (1) Physics of nuclear explosion experiments. This is a description of basic nuclear physics and elementary nuclear weapon design. Also discussed are testing practices. (2) Other nuclear experiments. This section discusses experiments that produce small amounts of nuclear energy but differ from explosion experiments discussed in the first chapter. This includes the type of activities, such as laser fusion, that would continue after a CTBT is in force. (3) Monitoring tests in various environments. This section describes the different physical environments in which a test could be conducted (underground, in the atmosphere, in space, underwater, and in the laboratory); the sources of non-nuclear events (such as earthquakes and mining operations); and the opportunities for evasion. (4) On-site inspections. A CTBT is likely to include these inspections as an element of the verification provisions, in order to resolve the nature of ambiguous events. This chapter describes some technical considerations and technologies that are likely to be useful. (5) Selecting verification measures. This chapter discusses the uncertain nature of the evidence from monitoring systems and how compliance judgments could be made, taking the uncertainties into account. It also discusses how to allocate monitoring resources, given the likelihood of testing by various countries in various environments.

  11. LHC Availability 2017: Technical Stop 1 to Technical Stop 2

    CERN Document Server

    Todd, Benjamin; Apollonio, Andrea; Walsh, David John; CERN. Geneva. ATS Department

    2017-01-01

    This document summarises the LHC machine availability for the period of Technical Stop 1 (TS1) to Technical Stop 2 (TS2) in 2017. This period was dedicated to proton physics with a bunch spacing of 25ns. This note has been produced and ratified by the Availability Working Group which has complied fault information for the period in question using the Accelerator Fault Tracker.

  12. Surgeons' non-technical skills.

    Science.gov (United States)

    Yule, Steven; Paterson-Brown, Simon

    2012-02-01

    The importance of non-technical skills to surgical performance is gaining wide acceptance. This article discusses the core cognitive and social skills categories thought to underpin medical knowledge and surgical expertise, and describes the rise of non-technical skill models of assessment in surgery. Behavior rating systems such as NOTSS (Non-Technical Skills for Surgeons) have been developed to support education and assessment in this regard. We now understand more about these critical skills and how they impact surgery. The challenge in the future is to incorporate them into undergraduate teaching, postgraduate training, workplace assessment, and perhaps even selection. Copyright © 2012 Elsevier Inc. All rights reserved.

  13. Deployment and Automated Technical Order Support

    Science.gov (United States)

    1989-02-01

    Bureaucracy ....................................... 8 2 Technical Order Distribution Office Organization ................................... 9 3 Volume...20 Shop or per TODS TOs Workstation Figure 2. Technical Order Distribution Office Organization . 9 The Nature of Technical Orders Several factors have

  14. MedlinePlus Connect: Technical Information

    Science.gov (United States)

    ... page: https://medlineplus.gov/connect/technical.html MedlinePlus Connect: Technical Information To use the sharing features on ... Information Page Web Service Technical Information Page MedlinePlus Connect Implementation Options Web Application How does it work? ...

  15. The Hong Kong Bridge Protocol. Immediate loading of mandibular Brånemark fixtures using a fixed provisional prosthesis: preliminary results.

    Science.gov (United States)

    Chow, J; Hui, E; Liu, J; Li, D; Wat, P; Li, W; Yau, Y K; Law, H

    2001-01-01

    The Brånemark System Classic is well documented for its successful and predictable results in dental implant rehabilitation. However, the classic two-stage protocol is associated with problems, such as long treatment time and high treatment cost. To overcome these problems, new developments, including early functional loading protocol and Brånemark System Novum, have been introduced by various groups of researchers. In Hong Kong, a protocol has been developed to immediately load the Brånemark System fixtures with a fixed provisional prosthesis. The goal of this prospective study was to present the Hong Kong Bridge protocol and report the short-term evaluation of this protocol in a group of patients who had undergone dental implant treatment for their edentulous mandibles. Twenty-seven consecutive patients being treated at the Hong Kong Osseointegration Implant Centre between June 1998 and December 2000 were included in this study. A total of 123 Brånemark System fixtures were installed and regularly followed up for 3 to 30 months. The prosthesis stability and the marginal bone level were regularly evaluated clinically and radiographically, respectively, after the implant surgery. Fifteen of the 27 patients had been followed up for 1 year or longer. Two patients with eight fixtures were withdrawn from the study. Two of the 115 remaining fixtures failed, resulting in an overall implant survival rate of 98.3%. The mean marginal bone change was reported on 49 fixtures that had passed the 1-year review. The mean marginal bone loss was 0.60 mm (p < .05) after 1 year of functional loading. To load the mandibular Brånemark System fixtures immediately according to the Hong Kong Bridge protocol was a predictable and simple method with good results during this preliminary study period.

  16. Retrospective analysis of 56 edentulous dental arches restored with 344 single-stage implants using an immediate loading fixed provisional protocol: statistical predictors of implant failure.

    Science.gov (United States)

    Kinsel, Richard P; Liss, Mindy

    2007-01-01

    The purpose of this retrospective study was to evaluate the effects of implant dimensions, surface treatment, location in the dental arch, numbers of supporting implant abutments, surgical technique, and generally recognized risk factors on the survival of a series of single-stage Straumann dental implants placed into edentulous arches using an immediate loading protocol. Each patient received between 4 and 18 implants in one or both dental arches. Periapical radiographs were obtained over a 2- to 10-year follow-up period to evaluate crestal bone loss following insertion of the definitive metal-ceramic fixed prostheses. Univariate tests for failure rates as a function of age ( or = 60 years), gender, smoking, bone grafting, dental arch, surface type, anterior versus posterior, number of implants per arch, and surgical technique were made using Fisher exact tests. The Cochran-Armitage test for trend was used to evaluate the presence of a linear trend in failure rates regarding implant length and implant diameter. Logistic regression modeling was used to determine which, if any, of the aforementioned factors would predict patient and implant failure. A significance criterion of P = .05 was utilized. Data were collected for 344 single-stage implants placed into 56 edentulous arches (39 maxillae and 17 mandibles) of 43 patients and immediately loaded with a 1-piece provisional fixed prosthesis. A total of 16 implants failed to successfully integrate, for a survival rate of 95.3%. Increased rates of failure were associated with reduced implant length, placement in the posterior region of the jaw, increased implant diameter, and surface treatment. Implant length emerged as the sole significant predictor of implant failure. In this retrospective analysis of 56 consecutively treated edentulous arches with multiple single-stage dental implants loaded immediately, reduced implant length was the sole significant predictor of failure.

  17. Facial bone alterations on maxillary anterior single implants for immediate placement and provisionalization following tooth extraction: a superimposed cone beam computed tomography study.

    Science.gov (United States)

    Morimoto, Taichiro; Tsukiyama, Yoshihiro; Morimoto, Keizo; Koyano, Kiyoshi

    2015-12-01

    The purpose of this cone beam computed tomography (CBCT) study was to describe the facial bone changes around single implants for immediate placement and provisionalization following tooth extraction in the maxillary anterior. The data between 2008 and 2013 were collected retrospectively. Superimposed facio-palatal cross-sectional CBCT images for the implants were derived from preoperative and postoperative radiographs via standardized CBCT processes. Horizontal and vertical facial measurements on the implants were identified at preoperative and approximately 1-year postoperative follow-ups. Correlation coefficient for those parameters was evaluated. A total of 12 single implants in 12 patients were included in this study. The mean loading period was 13.3 months (range 12-15 months). The median data of preoperative bone thickness 0.54 mm (A), preoperative vertical bone level 1.46 mm (B), postoperative bone thickness 1.77 mm (C), postoperative vertical bone level 1.08 mm (D), horizontal distance from outer surface of preoperative facial bone to implant surface 2.08 mm (E), horizontal gap distance 1.41 mm (E-A), horizontal bone resorption -0.26 mm (E-C), and vertical bone resorption -0.25 mm (B-D) were obtained. The data at the implant platform level (IPL) were selected for the horizontal measurements. Spearman's analysis demonstrated statistically significant correlations between B and D, C and E, E and E-A, and B and E-C (P maxillary anterior showed excellent outcomes with the small facial bone alterations around the implants. Neither preoperative facial bone thickness nor horizontal gap distance influenced the amount of facial bone resorptions. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  18. Guided implant surgery with placement of a presurgical CAD/CAM patient-specific abutment and provisional in the esthetic zone.

    Science.gov (United States)

    Mandelaris, George A; Vlk, Scott D

    2014-01-01

    Parallel use of implant treatment planning software and cone-beam computed tomography (CBCT) can, using certain criteria, consolidate steps and streamline tooth replacement strategies. The authors describe such a case in the esthetic zone whereby flapless extraction and immediate implant placement using CT-guided surgery were performed simultaneously, with placement of a computer-aided design/computer-aided manufactured (CAD/CAM) patient-specific abutment and non-occlusal function provisional in a single visit (supporting the "one-abutment, one-time" concept). An over-retained primary cuspid in a periodontally healthy woman with well-controlled type-2 diabetes was replaced with an implant and CAD/CAM patient-specific abutment in the No. 11 position. A necessary implant-axis angle correction was customized using digital information from a CBCT scan and implant treatment planning software, without the need for site development or a conventional impression. This data integration and streamlined workflow enabled fabrication of a CAD/CAM patient-specific abutment before surgical treatment. The abutment remained in place from implant surgery to the prosthetic phase, with minimal soft-tissue changes, enabling preservation of pink esthetics and expediting treatment. The result was a preserved emergence profile in the presence of high esthetic demands. However, due to slight post-extraction soft-tissue changes, digital reformatting of the abutment was required when the final crown was fabricated, thus limiting the disruption of the biologic width to a one-time occurrence. The importance of case selection for this treatment protocol in the esthetic zone cannot be overemphasized. A thick crestal dentoalveolar bone phenotype (> 1 mm, approaching 2 mm in this case), broad zone of attached and keratinized gingiva (3 mm to 4 mm in this case), adequate peri-implant soft-tissue thickness (> 1 mm in this case), and high primary implant stability (ISQ = 80 in this case) were all

  19. Implant treatment software planning and guided flapless surgery with immediate provisional prosthesis delivery in the fully edentulous maxilla. A retrospective analysis of 15 consecutively treated patients.

    Science.gov (United States)

    Meloni, Silvio Mario; De Riu, Giacomo; Pisano, Miena; Cattina, Gavino; Tullio, Antonio

    2010-01-01

    To evaluate the clinical outcome of fully edentulous patients in the maxilla, who were treated with immediately loaded implant-supported cross-arch bridges using computer-aided implant surgery. The clinical outcome of 15 consecutive patients (5 males and 10 females) with a mean age of 52 years (range 40 to 70), with edentulous arches and treated with implant-supported cross-arch bridges was evaluated. Two computed tomography scans were performed, the first with the patient wearing the denture/radiographic guide and the radiographic index, and the second of the denture alone. The guided flapless surgical procedure was performed under local anaesthesia. Ninety implants were placed. The implant length ranged from 10 to 13 mm and the implant diameter was either 4.3 or 5 mm. All implants were immediately loaded with screw-retained provisional acrylic prostheses prepared in advance and delivered immediately after surgery. Clinical and radiographic follow-up visits were scheduled at 6, 12 and 18 months from surgery; implant survival rate, marginal bone levels, patient satisfaction and any complications were recorded. After the follow-up period of 18 months, two patients each lost one implant. After 18 months, patients lost, on average, 1.6 mm of peri-implant marginal bone. A patient satisfaction questionnaire at 18 months revealed a very high level of satisfaction with the treatment. Although limited by the number of patients, it can be concluded that software- and computed tomography-guided surgical planning for completely edentulous arches provides reliable results with high success rates.

  20. International Technical Communication: Beyond Translation, Localization.

    Science.gov (United States)

    Klein, Fred

    1993-01-01

    Offers a personal view of international technical communication. Discusses computer-assisted translation, machine translation, machine interpreting, and the future of international technical communication. (SR)

  1. Polar source analysis : technical memorandum

    Science.gov (United States)

    2017-09-29

    The following technical memorandum describes the development, testing and analysis of various polar source data sets. The memorandum also includes recommendation for potential inclusion in future releases of AEDT. This memorandum is the final deliver...

  2. NASA Technical Reports Server (NTRS)

    Data.gov (United States)

    National Aeronautics and Space Administration — The NTRS is a valuable resource for researchers, students, educators, and the public to access NASA's current and historical technical literature and engineering...

  3. Engineering Technical Support Center (ETSC)

    Science.gov (United States)

    ETSC is EPA’s technical support and resource centers responsible for providing specialized scientific and engineering support to decision-makers in the Agency’s ten regional offices, states, communities, and local businesses.

  4. Hydrogen Storage Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-06-01

    The mission of the Hydrogen Storage Technical Team is to accelerate research and innovation that will lead to commercially viable hydrogen-storage technologies that meet the U.S. DRIVE Partnership goals.

  5. New functions for technical supervision

    Energy Technology Data Exchange (ETDEWEB)

    Herkommer, E.; Kressel, E.; Wollenschlaeger, M.

    1988-07-01

    The discussion concerns the foundation of a new Institution namely an 'Environmental Technical Inspection Board', in order to implement faster the technical and scientific findings in conservation and to control more efficiently the adherence to safety regulations. The article presents a review of the legal regulations in conservation, describes their constitutional status, tasks and legal status of the experts in the technical control societies, tasks and legal position of an environmental technical inspection board as well as its financing. It is stated that the execution deficit in pollution control can be decreased by better participation of experts and permanent control of all potentially dangerous installations. In order to realize this concept, the extension of already available structures presents itself, especially the consultation of officially approved experts, without a new administrative machinery having to be created. (orig./HSCH).

  6. Fuel Cell Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-06-01

    The Fuel Cell Technical Team promotes the development of a fuel cell power system for an automotive powertrain that meets the U.S. DRIVE Partnership (United States Driving Research and Innovation for Vehicle efficiency and Energy sustainability) goals.

  7. Technical infrastructure monitoring at CERN

    CERN Document Server

    Stowisek, Jan; Suwalska, Anna

    2006-01-01

    The Technical Infrastructure Monitoring system (TIM) is used to monitor and control CERN's technical services from the CERN Control Centre (CCC). The system's primary function is to provide CCC operators with reliable real-time information about the state of the laboratory's extensive and widely distributed technical infrastructure. TIM is also used to monitor all general services required for the operation of CERN's accelerator complex and the experiments. A flexible data acquisition mechanism allows TIM to interface with a wide range of technically diverse installations, using industry standard protocols wherever possible and custom designed solutions where needed. The complexity of the data processing logic, including persistence, logging, alarm handling, command execution and the evaluation of datadriven business rules is encapsulated in the system's business layer. Users benefit from a suite of advanced graphical applications adapted to operations (synoptic views, alarm consoles, data analysis tools etc....

  8. Technical Service Agreement (TSA) | FNLCR

    Science.gov (United States)

    Frederick National Laboratory for Cancer Research (FNLCR) scientists provide services and solutions to collaborators through the Technical Services Program, whose portfolio includes more than 200 collaborations with more than 80 partners. FNLCR’s u

  9. S-Chip Technical Assistance

    Data.gov (United States)

    U.S. Department of Health & Human Services — The page will provide access to reports and other published products designed to assist states with complicated S-Chip technical issues. The reports and products...

  10. Technical management courses (before July)

    CERN Multimedia

    2015-01-01

    Please find below the courses in the field of technical management scheduled before July and which have places available.       For more details about a course and to register, please go to the Training Catalogue. If you need a course which is not in the catalogue, please contact your supervisor, your Departmental Training Officer or HR-LD at Technical.Management.Training@cern.ch.

  11. Guam Initial Technical Assessment Report

    Energy Technology Data Exchange (ETDEWEB)

    Baring-Gould, I.; Conrad, M.; Haase, S.; Hotchkiss, E.; McNutt, P.

    2011-04-01

    Under an interagency agreement, funded by the Department of Interior's (DOI) Office of Insular Affairs (OIA), the National Renewable Energy Laboratory (NREL) was tasked to deliver technical assistance to the island of Guam by conducting an island initial technical assessment that would lay out energy consumption and production data and establish a baseline. This assessment will be used to conduct future analysis and studies by NREL that will estimate energy efficiency and renewable energy potential for the island of Guam.

  12. Objective assessment of technical skill.

    Science.gov (United States)

    MacRae, Helen M

    2011-01-01

    Objective assessment of technical skill is an important component of skills training: trainees require that deficiencies are clearly and objectively identified if a model of deliberate practice with feedback on skill acquisition is to be employed. There are several types of reliable and valid assessments for technical skill currently available. Copyright © 2010 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.

  13. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Brizard, Alain J

    2009-12-31

    Final Technical Report for U.S. Department of Energy Grant No. DE-FG02-09ER55005 Nonlinear FLR Effects in Reduced Fluid Models Alain J. Brizard, Saint Michael's College The above-mentioned DoE grant was used to support research activities by the PI during a sabbatical leave from Saint Michael's College in 2009. The major focus of the work was the role played by guiding-center and gyrocenter (linear and nonlinear) polarization and magnetization effects in understanding transport processes in turbulent magnetized plasmas. The theoretical tools used for this work include Lie-transform perturbation methods and Lagrangian (variational) methods developed by the PI in previous work. The present final technical report lists (I) the peer-reviewed publications that were written based on work funded by the Grant; (II) invited and contributed conference presentations during the period funded by the Grant; and (III) seminars presented during the period funded by the Grant. I. Peer-reviewed Publications A.J. Brizard and N. Tronko, 2011, Exact momentum conservation for the gyrokinetic Vlasov- Poisson equations, Physics of Plasmas 18 , 082307:1-14 [http://dx.doi.org/10.1063/1.3625554 ]. J. Decker, Y. Peysson, A.J. Brizard, and F.-X. Duthoit, 2010, Orbit-averaged guiding-center Fokker-Planck operator for numerical applications, Physics of Plasmas 17, 112513:1-12 [http://dx.doi.org/10.1063/1.3519514]. A.J. Brizard, 2010, Noether derivation of exact conservation laws for dissipationless reduced fluid models, Physics of Plasmas 17, 112503:1-8 [http://dx.doi.org/10.1063/1.3515303]. F.-X. Duthoit, A.J. Brizard, Y. Peysson, and J. Decker, 2010, Perturbation analysis of trapped particle dynamics in axisymmetric dipole geometry, Physics of Plasmas 17, 102903:1-9 [http://dx.doi.org/10.1063/1.3486554]. A.J. Brizard, 2010, Exact energy conservation laws for full and truncated nonlinear gyrokinetic equations, Physics of Plasmas 17, 042303:1-11 [http://dx.doi.org/10.1063/1.3374428]. A

  14. DECOVALEX II PROJECT. Technical report - Task 1A and 1B

    Energy Technology Data Exchange (ETDEWEB)

    Lanru Jing; Stephansson, Ove [Royal Inst. of Tech., Stockholm (Sweden). Dept. of Civil and Environmental Engineering; Chin-Fu Tsang [Lawrence Berkeley National Laboratory, Berkeley, CA (United States). Earth Science Division; Knight, J.L. [Nirex Ltd, Harwell (United Kingdom); Kautsky, F. [Swedish Nuclear Power lnspectorate (SKI), Stockholm (Sweden)

    1998-08-01

    DECOVALEX II project started in November 1995 as a continuation of the DECOVALEX I project, which was completed at the end of 1994. The project was initiated by recognizing the fact that a proper evaluation of the current capacities of numerical modelling of the coupled T-H-M processes in fractured media is needed not only for small scale, well controlled laboratory test cases such as those studied in DECOVALEX I, but also for less characterised, more complex and realistic in-situ experiments. This will contribute to validation and confidence building in the current mathematical models, numerical methods and computer codes. Four tasks were defined in the DECOVALEX II project: TASK 1 - numerical study of the RCF3 pumping test and shaft excavation at Sellafield by Nirex, UK; TASK 2 - numerical study of the in-situ T-H-M experiments at Kamaishi Mine by PNC, Japan; TASK 3 - review of current state-of-the-art of rock joint research and TASK 4 - report on the coupled T-H-M issues related to repository design and performance assessment. This report is one of the technical reports of the DECOVALEX II project, describing the work performed for TASK 1A and 1B - the predictions and model calibrations for the RCF 3 pumping test at Sellafield. Presented in this report are the descriptions of the project, tasks, approaches, methods and results of numerical modelling work carried out by the research teams. The report is a summary of the research reports written by the research teams and submitted to the project secretariat, and the discussions held during project workshops and task force group meetings. The opinions and conclusions in this report, however, reflect only ideas of the authors, not necessarily a collective representation of the funding organisations of the project. 21 refs, figs, tabs

  15. Reader-Centered Technical Writing

    Science.gov (United States)

    Narayanan, M.

    2012-12-01

    Technical writing is an essential part of professional communication and in recent years it has shifted from a genre-based approach. Formerly, technical writing primarily focused on generating templates of documents and sometimes it was creating or reproducing traditional forms with minor modifications and updates. Now, technical writing looks at the situations surrounding the need to write. This involves deep thinking about the goals and objectives of the project on hand. Furthermore, one observes that it is very important for any participatory process to have the full support of management. This support needs to be well understood and believed by employees. Professional writing may be very persuasive in some cases. When presented in the appropriate context, technical writing can persuade a company to improve work conditions ensuring employee safety and timely production. However, one must recognize that lot of professional writing still continues to make use of reports and instruction manuals. Normally, technical and professional writing addresses four aspects. Objective: The need for generating a given professionally written technical document and the goals the document is expected to achieve and accomplish. Clientele: The clientele who will utilize the technical document. This may include the people in the organization. This may also include "unintended readers." Customers: The population that may be affected by the content of the technical document generated. This includes the stakeholders who will be influenced. Environment: The background in which the document is created. Also, the nature of the situation that warranted the generation of the document. Swiss Psychologist Jean Piaget's view of Learning focuses on three aspects. The author likes to extend Jean Piaget's ideas to students, who are asked to prepare and submit Reader-Centered Technical Writing reports and exercises. Assimilation: Writers may benefit specifically, by assimilating a new object into

  16. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Howe, Gary; Albritton, John; Denton, David; Turk, Brian; Gupta, Raghubir

    2018-01-31

    -based gasification at increased efficiency and at significantly lower capital and operating costs than conventional syngas cleanup technologies. However, before the technology can be deemed ready for scale-up to a full commercial-scale demonstration, additional R&D testing is needed at the site to address the following critical technical risks: WDP sorbent stability and performance; Impact of WDP on downstream cleanup and conversion steps; Metallurgy and refractory; Syngas cleanup performance and controllability; Carbon capture performance and additional syngas cleanup The proposed plan to acquire this additional R&D data involves: Operation of the units to achieve an additional 3,000 hours of operation of the system within the performance period, with a target of achieving 1,000 hours of those hours via continuous operation of the entire integrated pre-commercial demonstration system; Rapid turnaround of repairs and/or modifications required as necessary to return any specific unit to operating status with documentation and lessons learned to support technology maturation, and; Proactive performance of maintenance activities during any unplanned outages and if possible while operating.

  17. Technical Support and Transfer of Geothrmal Technical Knowledge and Information

    Energy Technology Data Exchange (ETDEWEB)

    John W. Lund; Toni" Boyd

    2007-11-14

    The Geo-Heat Center (GHC) staff provided responses to 1442 technical support requests during the contract period (April 1, 2006 to September 30, 2007), which were six quarters under this contract. Our website, consisting of 1900 files, also contributes to our technical assistance activity. Downloaded files were 1,889,323 (3,448 per day) from our website, the total number of users was 1,365,258 (2,491 per day), and the total number of hits were 6,008,500 (10,064 per day). The GHC staff attended 60 workshops, short course and professional meeting and made 29 technical presentations. The staff also prepared and mailed out 2,000 copies of each of five issues of the GHC Quaterly Bulletin which contained 26 articles. We also mailed out approximately 5,000 papers and publications to interested individuals and organizations.

  18. Technical Feasibility Study of Thermal Energy Storage Integration into the Conventional Power Plant Cycle

    Directory of Open Access Journals (Sweden)

    Jacek D. Wojcik

    2017-02-01

    Full Text Available The current load balance in the grid is managed mainly through peaking fossil-fuelled power plants that respond passively to the load changes. Intermittency, which comes from renewable energy sources, imposes additional requirements for even more flexible and faster responses from conventional power plants. A major challenge is to keep conventional generation running closest to the design condition with higher load factors and to avoid switching off periods if possible. Thermal energy storage (TES integration into the power plant process cycle is considered as a possible solution for this issue. In this article, a technical feasibility study of TES integration into a 375-MW subcritical oil-fired conventional power plant is presented. Retrofitting is considered in order to avoid major changes in the power plant process cycle. The concept is tested based on the complete power plant model implemented in the ProTRAX software environment. Steam and water parameters are assessed for different TES integration scenarios as a function of the plant load level. The best candidate points for heat extraction in the TES charging and discharging processes are evaluated. The results demonstrate that the integration of TES with power plant cycle is feasible and provide a provisional guidance for the design of the TES system that will result in the minimal influence on the power plant cycle.

  19. Research in Technical Communication. A Bibliographic Sourcebook.

    Science.gov (United States)

    Moran, Michael G., Ed.; Journet, Debra, Ed.

    The essays in this volume enunciate the pressing need for a theoretical framework for the study of technical communication. The first part of the volume provides an overview of extensive ways to study technical communication. Subsequent chapters discuss humanistic approaches to technical communication, the history of technical communication,…

  20. 47 CFR 18.207 - Technical report.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Technical report. 18.207 Section 18.207... Applications and Authorizations § 18.207 Technical report. When required by the Commission a technical report...(s) under which the equipment is or will be marketed. (e) A statement of the rated technical...

  1. 49 CFR 552.6 - Technical review.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 6 2010-10-01 2010-10-01 false Technical review. 552.6 Section 552.6... § 552.6 Technical review. The appropriate Associate Administrator conducts a technical review of the petition. The technical review may consist of an analysis of the material submitted, together with...

  2. 32 CFR 2001.51 - Technical security.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Technical security. 2001.51 Section 2001.51....51 Technical security. Based upon the risk management factors referenced in § 2001.40 of this directive, agency heads shall determine the requirement for technical countermeasures such as Technical...

  3. Mutations in the X-linked retinitis pigmentosa genes RPGR and RP2 found in 8.5% of families with a provisional diagnosis of autosomal dominant retinitis pigmentosa.

    Science.gov (United States)

    Churchill, Jennifer D; Bowne, Sara J; Sullivan, Lori S; Lewis, Richard Alan; Wheaton, Dianna K; Birch, David G; Branham, Kari E; Heckenlively, John R; Daiger, Stephen P

    2013-02-19

    We determined the fraction of families in a well-characterized cohort with a provisional diagnosis of autosomal dominant retinitis pigmentosa (adRP) that have disease-causing mutations in the X-linked retinitis pigmentosa GTPase regulator (RPGR) gene or the retinitis pigmentosa 2 (RP2) gene. Families with a provisional clinical diagnosis of adRP, and a pedigree consistent with adRP but no male-to-male transmission were selected from a cohort of 258 families, and tested for mutations in the RPGR and RP2 genes with di-deoxy sequencing. To facilitate testing of RPGR in "adRP" families that had no male members available for testing, the repetitive and purine-rich ORF15 of RPGR was subcloned and sequenced in heterozygous female subjects from 16 unrelated families. Direct sequencing of RPGR and RP2 allowed for identification of a disease-causing mutation in 21 families. Of these "adRP" families 19 had RPGR mutations, and two had RP2 mutations. Subcloning and sequencing of ORF15 of RPGR in female subjects identified one additional RPGR mutation. Of the 22 mutations identified, 15 have been reported previously. These data show that 8.5% (22 in 258) of families thought to have adRP truly have X-linked retinitis pigmentosa (XLRP). These results have substantive implications for calculation of recurrence risk, genetic counseling, and potential treatment options, and illustrate the importance of screening families with a provisional diagnosis of autosomal inheritance and no male-to-male transmission for mutations in X-linked genes. Mutations in RPGR are one of the most common causes of all forms of retinitis pigmentosa.

  4. Randomized comparison of conservative versus aggressive strategy for provisional side branch intervention in coronary bifurcation lesions: results from the SMART-STRATEGY (Smart Angioplasty Research Team-Optimal Strategy for Side Branch Intervention in Coronary Bifurcation Lesions) randomized trial.

    Science.gov (United States)

    Song, Young Bin; Hahn, Joo-Yong; Song, Pil-Sang; Yang, Jeong Hoon; Choi, Jin-Ho; Choi, Seung-Hyuk; Lee, Sang Hoon; Gwon, Hyeon-Cheol

    2012-11-01

    The authors sought to compare conservative and aggressive strategies for provisional side branch (SB) intervention in coronary bifurcation lesions. The optimal provisional approach for coronary bifurcation lesions has not been established. In this prospective randomized trial, 258 patients with a coronary bifurcation lesion treated with drug-eluting stents were randomized to a conservative (n = 128) or aggressive (n = 130) SB intervention strategy. The criteria for SB intervention after main vessel stenting differed between the conservative and aggressive groups; Thrombolysis In Myocardial Infarction flow grade 75% for non-left main bifurcations and diameter stenosis >75% versus diameter stenosis >50% for left main bifurcations. The primary endpoint was target vessel failure (cardiac death, myocardial infarction, or target vessel revascularization) at 12 months. Left main bifurcation lesions were noted in 114 patients (44%) and true bifurcation lesions in 171 patients (66%). SB ballooning after main vessel stenting and SB stenting after SB ballooning were performed less frequently in the conservative group than in the aggressive group (25.8% vs. 68.5%, p strategy was associated with a lower incidence of procedure-related myocardial necrosis compared with the aggressive strategy (5.5% vs. 17.7%, p = 0.002). At 12 months, the incidence of target vessel failure was similar in both groups (9.4% in the conservative group vs. 9.2% in the aggressive group, p = 0.97). Compared with the aggressive strategy, the conservative strategy for provisional SB intervention was associated with similar long-term clinical outcomes and a lower incidence of procedure-related myocardial necrosis. (Optimal Strategy for Side Branch Stenting in Coronary Bifurcation Lesions [SMART-STRATEGY]; NCT00794014). Copyright © 2012 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

  5. CEEM Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Bowers, John [Univ. of California, Santa Barbara, CA (United States)

    2014-11-26

    concentrating photovoltaic applications thathave substantially higher efficiency than single substrate cells made of elemental semiconductors such as silicon. This task required the development of new cell bonding methods with excellent coupling of both photons and electrons between the sub-cells. To accomplish this, we developed (1) GaInN solar cells with enhanced performance by using quantum-well absorbers and front-surface optical texturing, (2) a hybrid "pillar-array" bond which uses an array of metal pillars for electrical coupling, and (3) a "hybrid moth-eye" optical coating which combines the benefits of nano-imprinted moth-eye coatings and traditional multilayer coatings. The technical effectiveness was assessed by measurement of the photovoltaic efficiency of solar cells made using these techniques; the ultrahigh efficiencies targeted by this work are of compelling economic value for concentrating photovoltaics.

  6. Examen de auditoría integral al componente calificación de los activos de riesgos y provisiones de la cartera del Banco del Pacifico S.A correspondientes al periodo 2011-2012

    OpenAIRE

    Anchundia Paredes, Monica Isabel

    2014-01-01

    El propósito de la tesis es el examen integral al componente calificación de los activos de riesgos y provisiones de la cartera del Banco del Pacifico S.A correspondientes al periodo 2011-2012 , que contribuirá al mejoramiento de la Entidad y a la toma de decisiones por parte de la Administración cuyos resultados serán expresados en el Informe Final, que es el producto de la revisión. El examen de auditoría se encuentra basado en las normativas y disposiciones reglamentarias establecidas ...

  7. The composing process in technical communication

    Science.gov (United States)

    Masse, R. E.

    1981-01-01

    The theory and application of the composing process in technical communications is addressed. The composing process of engineers, some implications for composing research for the teaching and research of technical communication, and an interpretation of the processes as creative experience are also discussed. Two areas of technical communications summarized concern: the rhetorical features of technical communications, and the theoretical background for a process-based view, a problem-solving approach to technical writing.

  8. How to be an Effective Technical Writer?

    OpenAIRE

    M Solaiman Ali; Dheya Al-Othmany

    2012-01-01

    Abstract--This paper has focused on technical writing as a skill for engineers. It has sought to define technical writing and throw light on the content and technique of writing the various components of successful technical reports (for example, articles, papers, or research reports, such as theses and dissertations). Then, it has highlighted other special features and principles of effective technical writing. The material in this paper is divided into seven major parts. Part 1 (Technical w...

  9. FLAMMABLE GAS TECHNICAL BASIS DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    KRIPPS, L.J.

    2005-03-03

    This document describes the qualitative evaluation of frequency and consequences for DST and SST representative flammable gas accidents and associated hazardous conditions without controls. The evaluation indicated that safety-significant structures, systems and components (SSCs) and/or technical safety requirements (TSRs) were required to prevent or mitigate flammable gas accidents. Discussion on the resulting control decisions is included. This technical basis document was developed to support WP-13033, Tank Farms Documented Safety Analysis (DSA), and describes the risk binning process for the flammable gas representative accidents and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the event frequency and consequence.

  10. Chairside preparation of provisional restorations.

    Science.gov (United States)

    Moy, Peter K; Parminter, Paul E

    2005-09-01

    Increasing demands are placed on the oral and maxillofacial surgeon to perform early or immediate loading of dental implants due to demands and expectations of the referring doctor and patients. In order to provide the patient with an immediately loaded, functioning implant, the surgeon should consider incorporating the fabrication of the temporary restoration as an additional service for their implant patients. The armamentarium necessary for the oral and maxillofacial surgeon to deliver a temporary restoration will be described. The materials and components needed to provide this service will be listed and a sequence of steps to easily accomplish the fabrication of a temporary crown will be presented. Temporary crowns cemented onto temporary or permanent implant abutments are ideal for the management of gingival contours. Initial soft tissue healing around the contours of the temporary crown, even with minimally invasive techniques, provides many advantages for the patient. There is less likelihood of gingival scarring, which minimizes the incidence of gingival recession and the patient is restored to normal form and function immediately. The fabrication of the temporary prosthesis by the oral and maxillofacial surgeon provides benefits for the surgeon, restorative doctor, as well as, the patient. By working closely with his or her restorative colleagues, the surgeon will be able to provide his or her implant patients with immediate return to form and function intraorally with minimum effort.

  11. Management of technical information department

    Energy Technology Data Exchange (ETDEWEB)

    Kim, T. H.; Han, D. H.; Moon, H. W. [and others

    1997-03-01

    This report introduces technical information activities in 1996. They are composed of basic tasks and applied tasks. 1. Basic activities - acquisition, cataloging, and Information services 2. Management of KAERI-TIPS (Technical Information Processing System) 3. Construction of the database for nuclear-related Information 4. Role of Specialized Nuclear Information Center in the field of nuclear energy and cooperation with INIS section of IAEA 5. Beside above activities, in 1996 TID homepage was opened and online document delivery service was provided. (author). 25 tabs., 17 figs.

  12. Technical aspects of data communication

    CERN Document Server

    MacNamara, John E

    1988-01-01

    Technical Aspects of Data Communication, Third Edition provides information pertinent to the technical aspects of data communication. This book discusses a simple asynchronous interface implemented with a specialized integrated circuit called a UART.Organized into 28 chapters, this edition begins with an overview of the interface standards ranging from the classic EIA-232-D to the EIA-530. This text then describes modems and modem control, with material on high-speed modems and error-correcting modems. Other chapters discuss hardware and software methods. This book discusses as well digital tr

  13. Technical note on drainage systems

    DEFF Research Database (Denmark)

    Bentzen, Thomas Ruby

    This technical note will present simple but widely used methods for the design of drainage systems. The note will primarily deal with surface water (rainwater) which on a satisfactorily way should be transport into the drainage system. Traditional two types of sewer systems exist: A combined system......’s not major different than described below - just remember to include this contribution for combined systems where the surface water (rain) and sewage are carried in the same pipes in the system and change some of the parameters for failure allowance (this will be elaborated further later on). The technical...

  14. Physical foundations of technical acoustics

    CERN Document Server

    Malecki, I

    1969-01-01

    Physical Foundations of Technical Acoustics discusses theoretical foundations of acoustical engineering. It is not so much a technical compendium as a systematic statement of physical laws so conceived that technologists might find in it all the information they need to become acquainted with the physical meaning and mathematical expression of phenomena they encounter in their work. To facilitate the acquirement of notions, which lie beyond a layman's grasp, the plan of narration adopted consists in beginning with the simplest idealized cases and then gradually moving on to the truest possibl

  15. TADS: Technical Assistance Development System.

    Science.gov (United States)

    Epting, Rosemary, Ed.

    Described is the Technical Assistance Development System (TADS), a component of the Frank Porter Graham Child Development Center of the University of North Carolina at Chapel Hill which offers support services to preschool demonstration centers for handicapped children in the First Chance Network. Discussed are the four types of services offered:…

  16. Mechanical Engineering Department technical review

    Energy Technology Data Exchange (ETDEWEB)

    Carr, R.B.; Abrahamson, L.; Denney, R.M.; Dubois, B.E (eds.)

    1982-01-01

    Technical achievements and publication abstracts related to research in the following Divisions of Lawrence Livermore Laboratory are reported in this biannual review: Nuclear Fuel Engineering; Nuclear Explosives Engineering; Weapons Engineering; Energy Systems Engineering; Engineering Sciences; Magnetic Fusion Engineering; and Material Fabrication. (LCL)

  17. Defense Technical Information Center thesaurus

    Energy Technology Data Exchange (ETDEWEB)

    Dickert, J.H. [ed.] [comp.

    1996-10-01

    This DTIC Thesaurus provides a basic multidisciplinary subject term vocabulary used by DTIC to index and retrieve scientific and technical information from its various data bases and to aid DTIC`s users in their information storage and retrieval operations. It includes an alphabetical posting term display, a hierarchy display, and a Keywork Out of Context (KWOC) display.

  18. Why technical-market research?

    Science.gov (United States)

    Lauglaug, A S

    1992-01-01

    Customers frequently need assistance in knowing what they want or might need. One process, technical-market research, helps understand the mind of the consumer so that the voice of the customer can be better translated into new products by designers, engineers, and marketers.

  19. Solar energy technical training directory

    Energy Technology Data Exchange (ETDEWEB)

    Corcoleotes, G; Kramer, K; O& #x27; Connor, K

    1979-06-01

    Available solar energy offerings in the technical training area are presented. Institutions are listed alphabetically by state. Each listing includes an institution address and phone number, solar programs or curricula offered, and detailed solar couse information. An alphabetical index of institutions in included. (MHR)

  20. Surprising Beauty in Technical Photography

    Science.gov (United States)

    Davidhazy, Andrew

    2009-01-01

    The Imaging and Photographic Technology area, in which the author teaches, is an applications- and technology-oriented photography program designed to prepare students for work in technical, corporate, industrial, and scientific environments. One day, the author received an e-mail message from an editor who had found his Web site and thought he…

  1. Design mentoring tool : [technical summary].

    Science.gov (United States)

    2011-01-01

    In 2004 a design engineer on-line mentoring tool was developed and implemented The purpose of the tool was to assist senior engineers mentoring new engineers to the INDOT design process and improve their technical competency. This approach saves seni...

  2. The Migration of Technical Workers

    DEFF Research Database (Denmark)

    Dahl, Michael S.; Sorenson, Olav

    2010-01-01

    Using panel data on the Danish population, we estimated the revealed preferences of scientists and engineers for the places in which they choose to work. Our results indicate that these technical workers exhibit substantial sensitivity to differences in wages but that they have even stronger pref...

  3. DOE FINAL TECHNICAL REPORT RP

    Energy Technology Data Exchange (ETDEWEB)

    RUSS PETERMAN

    2012-01-01

    The City of Georgetown Utility Systems (GUS) patnered with the private sector, the American Public Power Association (APPA) and Southwestern University to design, construct, test and monitor a solar co-generation system directly connected to the GUS electric distribution system. This report consists of the Primary Technical Report and 3 attachments.

  4. Technical Manual: Handwriting Research Corporation.

    Science.gov (United States)

    Robinson, Sharon E.; Hopper, Mark A.

    This technical manual discusses some of the recent developments in the science of graphology and their implications for the science. The manual contains the following sections: (1) Graphology: An Introduction; (2) "CHAPS": Computerized Handwriting Analysis Profiling Systems; (3) HRC Profiles; (4) Reliability; (5) Validity; (6) Historical…

  5. Socio-technical security metrics

    NARCIS (Netherlands)

    Gollmann, D.; Herley, C.; Koenig, V.; Pieters, W.; Sasse, M.A.

    2015-01-01

    Report from Dagstuhl seminar 14491. This report documents the program and the outcomes of Dagstuhl Seminar 14491 “Socio-Technical Security Metrics”. In the domain of safety, metrics inform many decisions, from the height of new dikes to the design of nuclear plants. We can state, for example, that

  6. Hydrogen Delivery Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-06-01

    The mission of the Hydrogen Delivery Technical Team (HDTT) is to enable the development of hydrogen delivery technologies, which will allow for fuel cell competitiveness with gasoline and hybrid technologies by achieving an as-produced, delivered, and dispensed hydrogen cost of $2-$4 per gallon of gasoline equivalent of hydrogen.

  7. Gigabit Ethernet: A Technical Assessment.

    Science.gov (United States)

    Axner, David

    1997-01-01

    Describes gigabit ethernet for LAN (local area network) technology that will expand ethernet bandwidth. Technical details are discussed, including protocol stacks, optical fiber, deployment strategy for performance improvement, ATM (Asynchronous Transfer Mode), real-time protocol, reserve reservation protocol, and standards. (LRW)

  8. Teaching Technical Skills through Play.

    Science.gov (United States)

    Gullion, Laurie

    The value of light-hearted play in teaching technical recreational sport skills is immense. Children as well as adults can learn more quickly and completely with a games-oriented approach. Often without realizing the hidden goal of excellent skiing or paddling, participants respond to intriguing tasks in a game, immerse themselves in good…

  9. Technical noise supplement : TeNS : a technical supplement to the Traffic Noise Analysis Protocol.

    Science.gov (United States)

    1998-10-01

    The purpose of this Technical Noise Supplement (TeNS) is to provide technical background : information on transportation-related noise in general and highway traffic noise in : particular. It is designed to elaborate on technical concepts and procedu...

  10. Recreational technical diving part 2: decompression from deep technical dives.

    Science.gov (United States)

    Doolette, David J; Mitchell, Simon J

    2013-06-01

    Technical divers perform deep, mixed-gas 'bounce' dives, which are inherently inefficient because even a short duration at the target depth results in lengthy decompression. Technical divers use decompression schedules generated from modified versions of decompression algorithms originally developed for other types of diving. Many modifications ostensibly produce shorter and/or safer decompression, but have generally been driven by anecdote. Scientific evidence relevant to many of these modifications exists, but is often difficult to locate. This review assembles and examines scientific evidence relevant to technical diving decompression practice. There is a widespread belief that bubble algorithms, which redistribute decompression in favour of deeper decompression stops, are more efficient than traditional, shallow-stop, gas-content algorithms, but recent laboratory data support the opposite view. It seems unlikely that switches from helium- to nitrogen-based breathing gases during ascent will accelerate decompression from typical technical bounce dives. However, there is evidence for a higher prevalence of neurological decompression sickness (DCS) after dives conducted breathing only helium-oxygen than those with nitrogen-oxygen. There is also weak evidence suggesting less neurological DCS occurs if helium-oxygen breathing gas is switched to air during decompression than if no switch is made. On the other hand, helium-to-nitrogen breathing gas switches are implicated in the development of inner-ear DCS arising during decompression. Inner-ear DCS is difficult to predict, but strategies to minimize the risk include adequate initial decompression, delaying helium-to-nitrogen switches until relatively shallow, and the use of the maximum safe fraction of inspired oxygen during decompression.

  11. Provisional CDC guidelines for the use and safety monitoring of bedaquiline fumarate (Sirturo) for the treatment of multidrug-resistant tuberculosis.

    Science.gov (United States)

    2013-10-25

    Multidrug-resistant tuberculosis (MDR TB) is caused by Mycobacterium tuberculosis that is resistant to at least isoniazid and rifampin, the two most effective of the four first-line TB drugs (the other two drugs being ethambutol and pyrazinamide). MDR TB includes the subcategory of extensively drug-resistant TB (XDR TB), which is MDR TB with additional resistance to any fluoroquinolone and to at least one of three injectable anti-TB drugs (i.e., kanamycin, capreomycin, or amikacin). MDR TB is difficult to cure, requiring 18-24 months of treatment after sputum culture conversion with a regimen that consists of four to six medications with toxic side effects, and carries a mortality risk greater than that of drug-susceptible TB. Bedaquiline fumarate (Sirturo or bedaquiline) is an oral diarylquinoline. On December 28, 2012, on the basis of data from two Phase IIb trials (i.e., well-controlled trials to evaluate the efficacy and safety of drugs in patients with a disease or condition to be treated, diagnosed, or prevented), the Food and Drug Administration (FDA) approved use of bedaquiline under the provisions of the accelerated approval regulations for "serious or life-threatening illnesses" (21CFR314.500) (Cox EM. FDA accelerated approval letter to Janssen Research and Development. Available at http://www.accessdata.fda.gov/drugsatfda_docs/appletter/2012/204384Orig1s000ltr.pdf). This report provides provisional CDC guidelines for FDA-approved and unapproved, or off-label, uses of bedaquiline in certain populations, such as children, pregnant women, or persons with extrapulmonary MDR TB who were not included in the clinical trials for the drug. CDC's Division of TB Elimination developed these guidelines on the basis of expert opinion informed by data from systematic reviews and literature searches. This approach is different from the statutory standards that FDA uses when approving drugs and drug labeling. These guidelines are intended for health-care professionals

  12. Works Technical Department progress report, August 1965

    Energy Technology Data Exchange (ETDEWEB)

    1965-09-17

    This document details the activities of the Savannah River Works Technical Department during the month of August 1965. Topics discussed are: Reactor Technology, Separations Technology, Engineering Assistance, Health Physics, Laboratories Overview, and Technical Papers Issued.

  13. Works Technical Department progress report, March 1961

    Energy Technology Data Exchange (ETDEWEB)

    None

    1961-04-19

    This document details the activities of the Savannah River Works Technical Department during the month of March 1961. Topics discussed are: Reactor Technology, Separations Technology, Engineering Assistance, Health Physics, Laboratories Overview, and Technical Papers Issued.

  14. Objective assessment of technical skills in surgery

    OpenAIRE

    Moorthy, Krishna; Munz, Yaron; Sarker, Sudip K.; Darzi, Ara

    2003-01-01

    In the past few years, considerable developments have been made in the objective assessment of technical proficiency of surgeons. Technical skills should be assessed during training, and various methods have been developed for this purpose

  15. Summary of Sandia Laboratories technical capabilities

    Energy Technology Data Exchange (ETDEWEB)

    1977-05-01

    The technical capabilities of Sandia Laboratories are detailed in a series of companion reports. In this summary the use of the capabilities in technical programs is outlined and the capabilities are summarized. 25 figures, 3 tables.

  16. Improving Technical Instruction Using Personality Styles.

    Science.gov (United States)

    Tomal, Daniel R.

    2003-01-01

    Incorporating personality styles into technical instruction can enhance student learning. Four personality styles based on Jung--intuitor, feeler, thinker, and doer--have implications for individualizing technical instruction. (JOW)

  17. Technical Training seminar: Texas Instruments

    CERN Multimedia

    2006-01-01

    Monday 6 November TECHNICAL TRAINING SEMINAR 14:00 to 17:30 - Training Centre Auditorium (bldg. 593) Texas Instruments Technical Seminar Michael Scholtholt, Field Application Engineer / TEXAS INSTRUMENTS (US, D, CH) POWER - A short approach to Texas Instruments power products Voltage mode vs. current mode control Differentiating DC/DC converters by analyzing control and compensation schemes: line / load regulation, transient response, BOM, board space, ease-of-use Introduction to the SWIFT software FPGA + CPLD power solutions WIRELESS / CHIPCON Decision criteria when choosing a RF platform Introduction to Texas Instruments wireless products: standardized platforms proprietary platforms ( 2.4 GHz / sub 1 GHz) development tools Antenna design: example for 2.4 GHz questions, discussion Industrial partners: Robert Medioni, François Caloz / Spoerle Electronic, CH-1440 Montagny (VD), Switzerland Phone: +41 24 447 0137, email: RMedioni@spoerle.com, http://www.spoerle.com Language: English. Free s...

  18. Mechanical Engineering Department technical abstracts

    Energy Technology Data Exchange (ETDEWEB)

    1984-07-01

    The Mechanical Engineering Department publishes abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). General information about the current role and activities of each of the Department's seven divisions precedes the technical abstracts. Further information about a division's work may be obtained from the division leader, whose name is given at the end of each divisional summary. The Department's seven divisions are as follows: Nuclear Test Engineering Division, Nuclear Explosives Engineering Division, Weapons Engineering Division, Energy Systems Engineering Division, Engineering Sciences Division, Magnetic Fusion Engineering Division and Materials Fabrication Division.

  19. Internal dosimetry technical basis manual

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-20

    The internal dosimetry program at the Savannah River Site (SRS) consists of radiation protection programs and activities used to detect and evaluate intakes of radioactive material by radiation workers. Examples of such programs are: air monitoring; surface contamination monitoring; personal contamination surveys; radiobioassay; and dose assessment. The objectives of the internal dosimetry program are to demonstrate that the workplace is under control and that workers are not being exposed to radioactive material, and to detect and assess inadvertent intakes in the workplace. The Savannah River Site Internal Dosimetry Technical Basis Manual (TBM) is intended to provide a technical and philosophical discussion of the radiobioassay and dose assessment aspects of the internal dosimetry program. Detailed information on air, surface, and personal contamination surveillance programs is not given in this manual except for how these programs interface with routine and special bioassay programs.

  20. Linac4 Technical Design Report

    CERN Document Server

    Arnaudon, L; Baylac, M; Bellodi, G; Body, Y; Borburgh, J; Bourquin, P; Broere, J; Brunner, O; Bruno, L; Carli, C; Caspers, Friedhelm; Cousineau, S M; Cuvet, Y; De Almeida Martins, C; Dobers, T; Fowler, T; Garoby, R; Gerigk, F; Goddard, B; Hanke, K; Hori, M; Jones, M; Kahle, K; Kalbreier, Willi; Kroyer, T; Küchler, D; Lombardi, A M; López-Hernandez, L A; Magistris, M; Martini, M; Maury, S; Page, E; Paoluzzi, M; Pasini, M; Raich, U; Rossi, C; Royer, J P; Sargsyan, E; Serrano, J; Scrivens, R; Silari, M; Timmins, M; Venturini-Delsolaro, W; Vretenar, M; Wegner, R; Weterings, W; Zickler, T

    2006-01-01

    Linac4 is an H- linear accelerator, intended to replace Linac2 as injector to the PS Booster (PSB). By delivering to the PSB a beam at 160 MeV energy, Linac4 will provide the conditions to double the brightness and intensity of the beam from the PSB, thus removing the first bottleneck towards higher brightness for the LHC and simplifying operation. Moreover, this new linac constitutes an essential component of any of the envisaged LHC upgrade scenarios and could open the way to future extensions of the CERN accelerator complex towards higher performance. This Technical Design Report presents a detailed technical overview of the Linac4 design as it stands at end 2006.

  1. TRManager – Technical Risk Manager

    Directory of Open Access Journals (Sweden)

    Mark A. Gregory

    2009-06-01

    Full Text Available This paper presents research into the development of a new information management technique called Technical Risk Manager. Project management involves the use of processes and information management techniques to aid decision making in the pursuit of project success. Project success may be achieved by meeting time, cost or performance criteria. Current project management practices focus on achieving time and cost project success criteria by using three information management techniques developed in the 1950s: Gantt, PERT and Critical Path Method. Technical Risk Manager has been developed to provide an information management technique that may be used to aid project management decision making in the pursuit of achieving the performance project success criteria.

  2. Scientific, technical and economic information center for the coal industry - 30 years of success in developing science and technology in the coal sector

    Energy Technology Data Exchange (ETDEWEB)

    Nemcova, A.; Bruskova, P. (PKD, Ostrava (Czechoslovakia). Rozvoj a Projektovani)

    1990-06-01

    Summarizes the 30-year history of the Center, including introduction of its first automated information system in 1969 and the organization's own suite of AUTIS programs introduced in 1979 and which now run on IBM 4331 and 4361 computers. The Center is responsible for coordinating acquisition of foreign literature, access to foreign data bases, international cooperation within the Informugol' system, AUTIS coal data base management, analytical information processing, publications and systems control. Its structure includes a directorate with secretariat, a technical library, an analysis section, an analytical information section, a publications section and a development section. The Center's publications include 4 periodicals and 5 occasional series covering many aspects of the coal industry. Briefly describes some products manufactured by Rohde and Schwarz of the FRG, with whom the Center has had a long association; these include the CMS 52 communications tester, ZWOB 6 polyscope, EZM spectrum monitor, FSAC spectrum analyzer, PSA 5 control computer, SMGU and GMHU signal generators and TIF video/timing analyzer.

  3. Technical specifications, Hanford production reactors

    Energy Technology Data Exchange (ETDEWEB)

    Gilbert, W.D. [comp.

    1962-06-25

    These technical specifications are applicable to the eight operating production reactor facilities, B, C, D, DR, F, H, KE, and KW. Covered are operating and performance restrictions and administrative procedures. Areas covered by the operating and performance restrictions are reactivity, reactor control and safety elements, power level, temperature and heat flux, reactor fuel loadings, reactor coolant systems, reactor confinement, test facilities, code compliance, and reactor scram set points. Administrative procedures include process control procedures, training programs, audits and inspections, and reports and records.

  4. Technical aspects of enteral nutrition.

    OpenAIRE

    Keymling, M

    1994-01-01

    Advances in technical aspects of enteral feeding such as the manufacture of tubes from polyurethane or silicone have helped promote the science of enteral nutrition. Nasoenteral tubes have few complications, apart from a high unwanted extubation rate and some reluctance from patients because of cosmetic unacceptability. Needle jejunostomy has low morbidity but can only be placed at laparotomy. Percutaneous gastrotomy (in all its different guises) has been established as a low risk procedure a...

  5. Hydrogen Production Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-06-01

    The Hydrogen Production Technical Team Roadmap identifies research pathways leading to hydrogen production technologies that produce near-zero net greenhouse gas (GHG) emissions from highly efficient and diverse renewable energy sources. This roadmap focuses on initial development of the technologies, identifies their gaps and barriers, and describes activities by various U.S. Department of Energy (DOE) offices to address the key issues and challenges.

  6. Why and How to Advance Technical Copywriting.

    Science.gov (United States)

    Henson, Leigh

    1996-01-01

    States that promotional writing for industrial/high-tech products, or technical copywriting, is gaining more attention in technical communication, although it is neglected in higher education. Testifies to the significance of technical copywriting. Suggests that dialogical audience analysis and an emphasis on rational appeal will contribute to…

  7. 10 CFR 61.13 - Technical analyses.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Technical analyses. 61.13 Section 61.13 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSING REQUIREMENTS FOR LAND DISPOSAL OF RADIOACTIVE WASTE Licenses § 61.13 Technical analyses. The specific technical information must also include the following analyses...

  8. 22 CFR 120.10 - Technical data.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Technical data. 120.10 Section 120.10 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS PURPOSE AND DEFINITIONS § 120.10 Technical data. (a) Technical data means, for purposes of this subchapter: (1) Information, other than...

  9. 48 CFR 212.211 - Technical data.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Technical data. 212.211 Section 212.211 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT... Acquisition of Commercial Items 212.211 Technical data. The DoD policy for acquiring technical data for...

  10. 32 CFR 701.38 - Technical data.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Technical data. 701.38 Section 701.38 National... DOCUMENTS AFFECTING THE PUBLIC FOIA Definitions and Terms § 701.38 Technical data. Recorded information, regardless of form or method of the recording, of a scientific or technical nature (including computer...

  11. 48 CFR 12.211 - Technical data.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Technical data. 12.211... ACQUISITION OF COMMERCIAL ITEMS Special Requirements for the Acquisition of Commercial Items 12.211 Technical data. Except as provided by agency-specific statutes, the Government shall acquire only the technical...

  12. 49 CFR 845.22 - Technical panel.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Technical panel. 845.22 Section 845.22... Technical panel. The Director, Bureau of Accident Investigation, or the Director, Bureau of Field Operations, shall designate members of the Board's technical staff to participate in the hearing and initially...

  13. Provisional Measures in the Case Concerning Application of the International Convention on the Elimination of All Forms of Racial Discrimination (Georgia v. Russian Federation

    Directory of Open Access Journals (Sweden)

    Tobias Thienel

    2009-02-01

    /LOKALE~1/Temp/msohtml1/01/clip_header.htm" fs; mso-footnote-continuation-separator:url("file:///C:/DOKUME~1/mlippold/LOKALE~1/Temp/msohtml1/01/clip_header.htm" fcs; mso-endnote-separator:url("file:///C:/DOKUME~1/mlippold/LOKALE~1/Temp/msohtml1/01/clip_header.htm" es; mso-endnote-continuation-separator:url("file:///C:/DOKUME~1/mlippold/LOKALE~1/Temp/msohtml1/01/clip_header.htm" ecs;} @page Section1 {size:612.0pt 792.0pt; margin:70.85pt 70.85pt 2.0cm 70.85pt; mso-header-margin:36.0pt; mso-footer-margin:36.0pt; mso-paper-source:0;} div.Section1 {page:Section1;} -->

    On 15 October 2008, the International Court of Justice indicated provisional measures under Article 41 of its Statute in the Case concerning Application of the International Convention on the Elimination of All Forms of Racial Discrimination (Georgia v. Russia.[1] By these measures, it instructed both Russia and Georgia to refrain from specified violations of the Convention,[2] to do all in their power to prevent their public authorities from committing such violations

  14. Belle II Technical Design Report

    CERN Document Server

    Abe, T; Adamczyk, K; Ahn, S; Aihara, H; Akai, K; Aloi, M; Andricek, L; Aoki, K; Arai, Y; Arefiev, A; Arinstein, K; Arita, Y; Asner, D M; Aulchenko, V; Aushev, T; Aziz, T; Bakich, A M; Balagura, V; Ban, Y; Barberio, E; Barvich, T; Belous, K; Bergauer, T; Bhardwaj, V; Bhuyan, B; Blyth, S; Bondar, A; Bonvicini, G; Bozek, A; Bracko, M; Brodzicka, J; Brovchenko, O; Browder, T E; Cao, G; Chang, M -C; Chang, P; Chao, Y; Chekelian, V; Chen, A; Chen, K -F; Chen, P; Cheon, B G; Chiang, C -C; Chistov, R; Cho, K; Choi, S -K; Chung, K; Comerma, A; Cooney, M; Cowley, D E; Critchlow, T; Dalseno, J; Danilov, M; Dieguez, A; Dierlamm, A; Dillon, M; Dingfelder, J; Dolenec, R; Dolezal, Z; Drasal, Z; Drutskoy, A; Dungel, W; Dutta, D; Eidelman, S; Enomoto, A; Epifanov, D; Esen, S; Fast, J E; Feindt, M; Garcia, M Fernandez; Fifield, T; Fischer, P; Flanagan, J; Fourletov, S; Fourletova, J; Freixas, L; Frey, A; Friedl, M; Fruehwirth, R; Fujii, H; Fujikawa, M; Fukuma, Y; Funakoshi, Y; Furukawa, K; Fuster, J; Gabyshev, N; Cueto, A Gaspar de Valenzuela; Garmash, A; Garrido, L; Geisler, Ch; Gfall, I; Goh, Y M; Golob, B; Gorton, I; Grzymkowski, R; Guo, H; Ha, H; Haba, J; Hara, K; Hara, T; Haruyama, T; Hayasaka, K; Hayashi, K; Hayashii, H; Heck, M; Heindl, S; Heller, C; Hemperek, T; Higuchi, T; Horii, Y; Hou, W -S; Hsiung, Y B; Huang, C -H; Hwang, S; Hyun, H J; Igarashi, Y; Iglesias, C; Iida, Y; Iijima, T; Imamura, M; Inami, K; Irmler, C; Ishizuka, M; Itagaki, K; Itoh, R; Iwabuchi, M; Iwai, G; Iwai, M; Iwasaki, M; Iwasaki, M; Iwasaki, Y; Iwashita, T; Iwata, S; Jang, H; Ji, X; Jinno, T; Jones, M; Julius, T; Kageyama, T; Kah, D H; Kakuno, H; Kamitani, T; Kanazawa, K; Kapusta, P; Kataoka, S U; Katayama, N; Kawai, M; Kawai, Y; Kawasaki, T; Kennedy, J; Kichimi, H; Kikuchi, M; Kiesling, C; Kim, B K; Kim, G N; Kim, H J; Kim, H O; Kim, J -B; Kim, J H; Kim, M J; Kim, S K; Kim, K T; Kim, T Y; Kinoshita, K; Kishi, K; Kisielewski, B; van Dam, K Kleese; Knopf, J; Ko, B R; Koch, M; Kodys, P; Koffmane, C; Koga, Y; Kohriki, T; Koike, S; Koiso, H; Kondo, Y; Korpar, S; Kouzes, R T; Kreidl, Ch; Kreps, M; Krizan, P; Krokovny, P; Krueger, H; Kruth, A; Kuhn, W; Kuhr, T; Kumar, R; Kumita, T; Kupper, S; Kuzmin, A; Kvasnicka, P; Kwon, Y -J; Lacasta, C; Lange, J S; Lee, I -S; Lee, M J; Lee, M W; Lee, S -H; Lemarenko, M; Li, J; Li, W D; Li, Y; Libby, J; Limosani, A; Liu, C; Liu, H; Liu, Y; Liu, Z; Liventsev, D; Virto, A Lopez; Makida, Y; Mao, Z P; Marinas, C; Masuzawa, M; Matvienko, D; Mitaroff, W; Miyabayashi, K; Miyata, H; Miyazaki, Y; Miyoshi, T; Mizuk, R; Mohanty, G B; Mohapatra, D; Moll, A; Mori, T; Morita, A; Morita, Y; Moser, H -G; Martin, D Moya; Mueller, T; Muenchow, D; Murakami, J; Myung, S S; Nagamine, T; Nakamura, I; Nakamura, T T; Nakano, E; Nakano, H; Nakao, M; Nakazawa, H; Nam, S -H; Natkaniec, Z; Nedelkovska, E; Negishi, K; Neubauer, S; Ng, C; Ninkovic, J; Nishida, S; Nishimura, K; Novikov, E; Nozaki, T; Ogawa, S; Ohmi, K; Ohnishi, Y; Ohshima, T; Ohuchi, N; Oide, K; Olsen, S L; Ono, M; Ono, Y; Onuki, Y; Ostrowicz, W; Ozaki, H; Pakhlov, P; Pakhlova, G; Palka, H; Park, H; Park, H K; Peak, L S; Peng, T; Peric, I; Pernicka, M; Pestotnik, R; Petric, M; Piilonen, L E; Poluektov, A; Prim, M; Prothmann, K; Regimbal, K; Reisert, B; Richter, R H; Riera-Babures, J; Ritter, A; Ritter, A; Ritter, M; Roehrken, M; Rorie, J; Rosen, M; Rozanska, M; Ruckman, L; Rummel, S; Rusinov, V; Russell, R M; Ryu, S; Sahoo, H; Sakai, K; Sakai, Y; Santelj, L; Sasaki, T; Sato, N; Sato, Y; Scheirich, J; Schieck, J; Schwanda, C; Schwartz, A J; Schwenker, B; Seljak, A; Senyo, K; Seon, O -S; Sevior, M E; Shapkin, M; Shebalin, V; Shen, C P; Shibuya, H; Shiizuka, S; Shiu, J -G; Shwartz, B; Simon, F; Simonis, H J; Singh, J B; Sinha, R; Sitarz, M; Smerkol, P; Sokolov, A; Solovieva, E; Stanic, S; Staric, M; Stypula, J; Suetsugu, Y; Sugihara, S; Sugimura, T; Sumisawa, K; Sumiyoshi, T; Suzuki, K; Suzuki, S Y; Takagaki, H; Takasaki, F; Takeichi, H; Takubo, Y; Tanaka, M; Tanaka, S; Taniguchi, N; Tarkovsky, E; Tatishvili, G; Tawada, M; Taylor, G N; Teramoto, Y; Tikhomirov, I; Trabelsi, K; Tsuboyama, T; Tsunada, K; Tu, Y -C; Uchida, T; Uehara, S; Ueno, K; Uglov, T; Unno, Y; Uno, S; Urquijo, P; Ushiroda, Y; Usov, Y; Vahsen, S; Valentan, M; Vanhoefer, P; Varner, G; Varvell, K E; Vazquez, P; Vila, I; Vilella, E; Vinokurova, A; Visniakov, J; Vos, M; Wang, C H; Wang, J; Wang, M -Z; Wang, P; Wassatch, A; Watanabe, M; Watase, Y; Weiler, T; Wermes, N; Wescott, R E; White, E; Wicht, J; Widhalm, L; Williams, K M; Won, E; Xu, H; Yabsley, B D; Yamamoto, H; Yamaoka, H; Yamaoka, Y; Yamauchi, M; Yin, Y; Yoon, H; Yu, J; Yuan, C Z; Yusa, Y; Zander, D; Zdybal, M; Zhang, Z P; Zhao, J; Zhao, L; Zhao, Z; Zhilich, V; Zhou, P; Zhulanov, V; Zivko, T; Zupanc, A; Zyukova, O

    2010-01-01

    The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been proposed. A new international collaboration Belle-II, is being formed. The Technical Design Report presents physics motivation, basic methods of the accelerator upgrade, as well as key improvements of the detector.

  15. Professional Excellence Beyond Technical Competence

    CERN Document Server

    Rossiter, Alan P

    2008-01-01

    The training path for engineers focuses intensely on scientific and technical knowledge. Yet, our professional and personal satisfaction and success also depend on other traits that make us more effective and productive. In this thought-provoking book, Alan Rossiter provides practical guidance in developing the skills to become more effective in your work, while also balancing your life. It is invaluable reading for graduating college students and young professionals as well as seasoned practitioners who find that work is becoming all-consuming.

  16. Technical report on the accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Bex, L. [ed.

    1995-12-31

    GANIL operation and the technical studies performed in 1994 are described. The milestones for 1994 are: SISSI (Source d`Ions Secondaires a Supraconducteurs Intense) has been in operation and used for secondary beam production with four different primary beams. The 100 kV platform for beam injection in the CO1 has been in operation for production of metallic beams which demand is increasing. Finally the SPIRAL project (Systeme de Production d`Ions Radioactifs Acceleres en Ligne) is in progress. In late 1994 the civil work has started in view of the installation of the machine in the north part of the GANIL machine building. (K.A.). 48 refs.

  17. PVWatts Version 1 Technical Reference

    Energy Technology Data Exchange (ETDEWEB)

    Dobos, A. P.

    2013-10-01

    The NREL PVWatts(TM) calculator is a web application developed by the National Renewable Energy Laboratory (NREL) that estimates the electricity production of a grid-connected photovoltaic system based on a few simple inputs. PVWatts combines a number of sub-models to predict overall system performance, and makes several hidden assumptions about performance parameters. This technical reference details the individual sub-models, documents assumptions and hidden parameters, and explains the sequence of calculations that yield the final system performance estimation.

  18. Technical presentation: Next Generation Oscilloscopes

    CERN Multimedia

    PH Department

    2011-01-01

      Rohde & Schwarz "Next Generation Oscilloscopes" - Introduction and Presentation Agenda: Wednesday 23 March  -  09:30 to 11:30 (open end) Bldg. 13-2-005 Language: English 09.30 Presentation "Next Generation Oscilloscopes" from Rohde & Schwarz RTO / RTM in theory and practice Gerard Walker 10.15 Technical design details from R&D Dr. Markus Freidhof 10.45 Scope and Probe Roadmap (confidential) Guido Schulze 11.00 Open Discussion Feedback, first impression, wishes, needs and requirements from CERN All 11.30 Expert Talks, Hands on All Mr. Dr. Markus Freidhof, Head of R&D Oscilloscopes, Rohde & Schwarz, Germany; Mr. Guido Schulze, ...

  19. La apuesta de la nueva Ley de Enjuiciamiento Civil Española por la revalorización de la importancia del enjuiciamiento de primer grado: La nueva regulación de la ejecución provisional de las sentencias

    Directory of Open Access Journals (Sweden)

    Rafael Hinojosa Segovia

    2006-01-01

    Full Text Available En este artículo se analiza uno de los institutos procesales más controvertidos del proceso de reforma de la Justicia civil, cual es la ejecución provisional de las sentencias, como mecanismo para acercar el horizonte temporal de una respuesta jurisdiccional efectiva. Teniendo a la vista los desafíos que debe asumirse para superar realmente los actuales problemas que sufre la Justicia chilena, los autores analizan la apuesta de la nueva Ley de Enjuiciamiento Civil española por la revalorización de la importancia del enjuiciamiento de primer grado a través de la nueva regulación de la ejecución provisional de las sentenciasOne of the most controversial procedural institutes of the civil justice reform is analyzed in this article, which is a provisional execution of the judgments, as a mechanism to get closer to the temporary horizon for an effective jurisdictional response. Bearing in mind the challenges that should be taken over in order to overcome the current problems that the Chilean Justice suffers; the authors analyze the involvement of the new Spanish civil prosecution Act for the revaluation due to the importance of the first instance trial through the new regulation of the provisional execution of the judgments

  20. Immediate Loading of Implants in the Edentulous Maxilla with a Fixed Provisional Restoration without Bone Augmentation: A Report on 5-Year Outcomes Data Obtained from a Prospective Clinical Trial.

    Science.gov (United States)

    Toljanic, Joseph A; Ekstrand, Karl; Baer, Russell A; Thor, Andreas

    2016-01-01

    Successful immediate loading of implants in the edentulous maxilla has been previously reported. The purpose of this 5-year prospective study was to further assess long-term outcomes following immediate loading of implants in the edentulous maxilla with fixed provisional restorations without the use of bone augmentation procedures. Subjects with edentulous maxillary arches each received six implants placed in native bone without augmentation. Where insufficient posterior bone volume existed, angled implant placement was employed. Fixed provisional restorations were delivered within 24 hours of implant placement. Implant placement locations, insertion torque values, and implant dimensions were recorded. Definitive fixed prostheses were placed within 24 weeks following implantation. Baseline implant site marginal bone levels were measured using periapical radiographs. Baseline peri-implant plaque and bleeding scores were obtained. Subjects were examined 6 months after implant placement and then annually for 5 years with follow-up periapical radiographs and plaque/bleeding scores obtained. Fifty-one subjects received a total of 306 implants. Forty subjects with 232 implants returned for the final follow-up appointment representing a 5-year implant survival proportion of 93% with a mean marginal bone loss of 0.44 ± 1.25 mm for this group. Thirty-nine of these 40 subjects continued to function with fixed restorations with the remaining subject functioning with a non-implant-retained removable prosthesis. Within the limitations of this study, predictable long-term implant rehabilitation outcomes were demonstrated for the edentulous maxilla using an immediate loading protocol without bone augmentation.

  1. Succession planning for technical experts

    Energy Technology Data Exchange (ETDEWEB)

    Kirk, Bernadette Lugue [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Cain, Ronald A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Dewji, Shaheen A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Agreda, Carla L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-07-01

    This report describes a methodology for identifying, evaluating, and mitigating the loss of key technical skills at nuclear operations facilities. The methodology can be adapted for application within regulatory authorities and research and development organizations, and can be directly applied by international engagement partners of the Department of Energy’s National Nuclear Security Administration (NNSA). The resultant product will be of direct benefit to two types of NNSA missions: (1) domestic human capital development programs tasked to provide focused technical expertise to succeed an aging nuclear operations workforce, and (2) international safeguards programs charged with maintaining operational safeguards for developing/existing nuclear power program in nations where minimal available resources must be used effectively. This report considers succession planning and the critical skills necessary to meet an institution’s goals and mission. Closely tied to succession planning are knowledge management and mentorship. In considering succession planning, critical skill sets are identified and are greatly dependent on the subject matter expert in question. This report also provides examples of critical skills that are job specific.

  2. The NASA Technical Report Server

    Science.gov (United States)

    Nelson, Michael L.; Gottlich, Gretchen L.; Bianco, David J.; Paulson, Sharon S.; Binkley, Robert L.; Kellogg, Yvonne D.; Beaumont, Chris J.; Schmunk, Robert B.; Kurtz, Michael J.; Accomazzi, Alberto

    1995-01-01

    The National Aeronautics and Space Act of 1958 established NASA and charged it to "provide for the widest practicable and appropriate dissemination of information concerning its activities and the results thereof." The search for innovative methods to distribute NASA's information lead a grass-roots team to create the NASA Technical Report Server (NTRS), which uses the World Wide Web and other popular Internet-based information systems as search engines. The NTRS is an inter-center effort which provides uniform access to various distributed publication servers residing on the Internet. Users have immediate desktop access to technical publications from NASA centers and institutes. The NTRS is comprised of several units, some constructed especially for inclusion in NTRS, and others that are existing NASA publication services that NTRS reuses. This paper presents the NTRS architecture, usage metrics, and the lessons learned while implementing and maintaining the service. The NTRS is largely constructed with freely available software running on existing hardware. NTRS builds upon existing hardware and software, and the resulting additional exposure for the body of literature contained ensures that NASA's institutional knowledge base will continue to receive the widest practicable and appropriate dissemination.

  3. Productivity Measurement Of Technical Institute

    Directory of Open Access Journals (Sweden)

    Miss.Pooja Yadav

    2015-05-01

    Full Text Available Abstract The increasing concern over globalization between other things has made the achievement of lifetime skills vital for all classes of people. Achievement of such skills can be developed from technical education programs in the advance of any nation. Skill gaining provides knowledge and inculcates the approaches that are essential for arrival and progress into an occupation. When skills are developed in any occupation it will provide and improve the standard of living with the cover beside poverty thereby behind national development. This paper observes sampling distribution and moving average concept that how technical education can generate the required skills the significance of skill acquisition its roles benefits and sustainability in national development. It also mentions among others that government should look into and improve productivity that can encourage skill achievement for the youths. The solutions are divided the sampling box into few group before stacking up workstation and use table and some other wood product. Cost reduction for each solution was intended and the solution with highest cost decrease is chosen to increase the productivity of the college.

  4. CERN Technical Training: Signal Processor

    CERN Multimedia

    HR Department

    2009-01-01

    A new training is going to be held at CERN on the ADSP SHARC Family. The "System Development and Programming with the Analog Devices’ SHARC Family" course is a 3.5-day hands-on training on Analog Devices SHARC DSPs, focusing on the latest ‘368/9 and 37x families. General DSP architecture, peripherals available, booting up process and DSP code development will be covered. Hardware tools, debugging and hardware design guidelines will be introduced as well. The course id designed for System Designers needing to make informed decisions on design tradeoffs, Hardware Designers needing to develop external interfaces, and Code Developers needing to know how to get the highest performance from their algorithms. The course will take place, in English, from 31 March to 4 April in the CERN Technical Training Center. Few places are still available. Registrations are opened on the Technical Training page. More information on our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your que...

  5. Technical Problems of Residential Construction

    Science.gov (United States)

    Nowogońska, Beata; Cibis, Jerzy

    2017-10-01

    Beauty, utility, durability - these are the features of good architecture and should also be the distinguishing qualities of every residential building. But do beauty and utility remain along with the passing of time? Performance characteristics are an indicator of both, the technical as well as aesthetic state of buildings. Aesthetic needs are in disagreement with the merciless aging process. The beauty of a city is formed not only by the original forms of new residential buildings, but also by existing tenement housing; thus preserving their aesthetics becomes a necessity. Time is continuously passing and along with it, aging intensifies. The aging process is a natural phenomenon for every material. The life expectancy of building materials is also limited. Along with the passing of time, the technical state of residential buildings continuously deteriorates. With the passing of time, the aesthetic values and preferences of users of flats change and the usability of the building decreases. The permanence of buildings, including residential buildings, is shaped not only by the forces of nature but also by activities of humans. A long lifespan is ensured by carrying out ongoing, systematic renovation-repair works. It is thanks to them that buildings derived from past centuries are still being used, and their market attractiveness is not decreasing.

  6. Technical Submission Form: Technical Specification of a Wave Energy Farm.

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, Jesse D.; Kim Nielsen; Ben Kennedy; Bull, Diana L; Costello, Ronan Patrick; Jochem Weber

    2017-04-01

    The Wave - SPARC project developed the Technology Performance Level (TPL) assessment procedure based on a rigorous Systems Engineering exercise. The TPL assessment allows a whole system evaluation of Wave Energy Conversion Technology by measuring it against the requirements determined through the Systems Engineering exercise. The TPL assessment is intended to be useful in technology evaluation; in technology innovation; in allocation of public or priva te investment, and; in making equipment purchasing decisions. This Technical Submission Form (TSF) serves the purpose of collecting relevant and complete information, in a technology agnostic way, to allow TPL assessment s to be made by third party assessor s. The intended usage of this document is that the organization or people that are performing the role of developers or promoters of a particular technology will use this form to provide the information necessary for the organization or people who are perf orming the assessor role to use the TPL assessment.

  7. How to be an Effective Technical Writer?

    Directory of Open Access Journals (Sweden)

    M Solaiman Ali

    2012-07-01

    Full Text Available Abstract--This paper has focused on technical writing as a skill for engineers. It has sought to define technical writing and throw light on the content and technique of writing the various components of successful technical reports (for example, articles, papers, or research reports, such as theses and dissertations. Then, it has highlighted other special features and principles of effective technical writing. The material in this paper is divided into seven major parts. Part 1 (Technical writing for engineers stresses that a successful engineering career requires strong writing skills. Part 2 (How to write the major sections or elements of a report describes the techniques of writing the abstract, introduction, literature review, procedure/methods & materials, results, discussion, conclusion, and recommendations. Part 3 (Special features of technical writing brings into focus some of the special features of technical writing such as tables & graphs in the text, graphics in instructions, team writing, ethics (plagiarism, document sources, three citation styles and IEEE reference style. Part 4 (Technical usage deals with writing abbreviations, initialisms and acronyms, numbers, units of measurement, and equations.Part 5 (Technical style highlights the imperative writing style and other features of technical writing such as the use of active and passive voices, plain vs. complex syntax, avoiding redundant or superfluous expressions, and vague generalities, using words or expressions with visual impact, the past tense to describe experimental work, the present tense to describe hypotheses, principles, theories and truths, and breaking up the text of the report into short sections. Part 6 (Document specifications emphasizes the technical writer’s need to conform to such document specifications as word count, format, font, number of words per line of text imposed. Part 7 (Reader-friendly technical writing suggests choosing the varied writing modes

  8. Marketing information: The technical report as product

    Science.gov (United States)

    Stoher, F. F.; Pinelli, T. E.

    1981-01-01

    Technical reports constitute a product, the primary means for communicating the results of research to the user. The Langley scientific and technical information (STI) review and evaluation project undertook a review of the technical report as an effective product for information communication. Style manuals describing theory and practice in technical report preparation; publication manuals covering such factors as design, layout, and type style; and copies of technical reports were obtained from industrial, academic, governmental, and research organizations. Based on an analysis of this material, criteria will be established for the report components, for the relationship of the components within the report context, and for the overall report organization. The criteria will be used as bench marks and compared with the publication standards currently used to prepare NASA technical reports.

  9. FOREX trading strategy formation using technical analysis

    OpenAIRE

    Klimavičius, Domas

    2010-01-01

    FOREX technical analysis indicators, their characteristics and capabilities are researched in this final master thesis. The main goal of this thesis is to determine if technical analysis indicators can recognise patterns in price movements and if they can predict future price movement. The first part of the thesis presents with FOREX theoretical aspects, its characteristics and participants. In the second part of the thesis FOREX analysis tools are overviewed, focusing on technical analysis. ...

  10. Technical Leadership Development Program- Year 4

    Science.gov (United States)

    2013-02-28

    Replace   ‘Enterprise   Questions’   with   individual   Technical   Leadership   White   Paper   submissions   by   each...UNCLASSIFIED Contract Number: H98230-08-D-0171 WHS TOO009 RT0004 Report No. SERC-2013-TR-013-4 28 February 2013 1 Technical Leadership ...SUBTITLE Technical Leadership Development Program- Year 4 5a. CONTRACT NUMBER H98230-08-D-0171 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6

  11. Chaotic Phenomena in Technical Control Systems

    DEFF Research Database (Denmark)

    Mosekilde, Erik

    1997-01-01

    The paper discusses a number of examples of technical control systems that can exhibit deterministic chaos and other forms of complex nonlinear behavior. These examples include thermostatically regulated radiators, closely placed refrigirators, and industrial cooling compressors. The paper...... continues to describe the possible perspective in driving our technical systems to operate in a chaotic regime. An example of a technical system capable of operating under unstable conditions is the F/A-18 fighter....

  12. Technical Support for Contaminated Sites | Science Inventory ...

    Science.gov (United States)

    In 1987, the U.S. Environmental Protection Agency’s (EPA) Office of Research and Development (ORD), Office of Land and Emergency Management, and EPA Regional waste management offices established the Technical Support Project. The creation of the Technical Support Project enabled ORD to provide effective technical assistance by ensuring ORD scientists and engineers were accessible to the Agency’s Office and Regional decision makers, including Remedial Project Managers, On-Scene Coordinators, and corrective action staff. Five ORD Technical Support Centers (TSCs) were created to facilitate this technical assistance. Three of the five TSCs are supported by the Sustainable and Healthy Communities Research Program, and are summarized in the poster being presented:• Engineering Technical Support Center (ETSC) in Cincinnati, Ohio• Ground Water Technical Support Center (GWTSC) in Ada, Oklahoma• Site Characterization and Monitoring Technical Support Center (SCMTSC) in Atlanta, GeorgiaOver the past 29 years, the Technical Support Centers have provided numerous influential products to its internal Agency clients and to those at the State level (through the EPA Regions). These products include, but are not limited to the following: Annual TSC reports from the three Centers, a hard-rock mining conference every other year, PRO-UCL software development for site characterization statistics, groundwater modeling using state-of-the-art modeling software, numerical mo

  13. Technical Excellence: A Requirement for Good Engineering

    Science.gov (United States)

    Gill, Paul S.; Vaughan, William W.

    2008-01-01

    Technical excellence is a requirement for good engineering. Technical excellence has many different ways of expressing itself within engineering. NASA has initiatives that address the enhancement of the Agency's technical excellence and thrust to maintain the associated high level of performance by the Agency on current programs/projects and as it moves into the Constellation Program and the return to the Moon with plans to visit Mars. This paper addresses some of the key initiatives associated with NASA's technical excellence thrust. Examples are provided to illustrate some results being achieved and plans to enhance these initiatives.

  14. TWRS privatization process technical baseline

    Energy Technology Data Exchange (ETDEWEB)

    Orme, R.M.

    1996-09-13

    The U.S. Department of Energy (DOE) is planning a two-phased program for the remediation of Hanford tank waste. Phase 1 is a pilot program to demonstrate the procurement of treatment services. The volume of waste treated during the Phase 1 is a small percentage of the tank waste. During Phase 2, DOE intends to procure treatment services for the balance of the waste. The TWRS Privatization Process Technical Baseline (PPTB) provides a summary level flowsheet/mass balance of tank waste treatment operations which is consistent with the tank inventory information, waste feed staging studies, and privatization guidelines currently available. The PPTB will be revised periodically as privatized processing concepts are crystallized.

  15. The Socio-Technical Man

    Science.gov (United States)

    Moreno, Yamir

    In the last 20 years or so, the field of complexity science has entered a new age. The combination of new theoretical insights and the data revolution has prepared the ground for a number of conceptual milestones in many disciplines as diverse as biology, physics, engineering, and economic and social sciences. At the same time, we have been able to identify new challenges whose solutions will confer the science of complex systems an unprecedented applied dimension. Here I would like to focus on one of these challenges: the socio-technical man. With the ever-increasing growth of both the world population and new technologies, it is fundamental for the well-being of humanity and our society to understand how humans interact among them and with the new technological environment...

  16. Technical abstracts: Mechanical engineering, 1990

    Energy Technology Data Exchange (ETDEWEB)

    Broesius, J.Y. (comp.)

    1991-03-01

    This document is a compilation of the published, unclassified abstracts produced by mechanical engineers at Lawrence Livermore National Laboratory (LLNL) during the calendar year 1990. Many abstracts summarize work completed and published in report form. These are UCRL-JC series documents, which include the full text of articles to be published in journals and of papers to be presented at meetings, and UCID reports, which are informal documents. Not all UCIDs contain abstracts: short summaries were generated when abstracts were not included. Technical Abstracts also provides descriptions of those documents assigned to the UCRL-MI (miscellaneous) category. These are generally viewgraphs or photographs presented at meetings. An author index is provided at the back of this volume for cross referencing.

  17. Crew Transportation Technical Management Processes

    Science.gov (United States)

    Mckinnie, John M. (Compiler); Lueders, Kathryn L. (Compiler)

    2013-01-01

    Under the guidance of processes provided by Crew Transportation Plan (CCT-PLN-1100), this document, with its sister documents, International Space Station (ISS) Crew Transportation and Services Requirements Document (CCT-REQ-1130), Crew Transportation Technical Standards and Design Evaluation Criteria (CCT-STD-1140), Crew Transportation Operations Standards (CCT STD-1150), and ISS to Commercial Orbital Transportation Services Interface Requirements Document (SSP 50808), provides the basis for a National Aeronautics and Space Administration (NASA) certification for services to the ISS for the Commercial Provider. When NASA Crew Transportation System (CTS) certification is achieved for ISS transportation, the Commercial Provider will be eligible to provide services to and from the ISS during the services phase.

  18. The International Technical Safety Forum

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    The International Technical Safety Forum is a meeting of safety experts from several physics labs in Europe and the US. Since 1998 participants have been meeting every couple of years to discuss common challenges in safety matters. The Forum helps them define best practices and learn from the important lessons learned by others.   The Forum's participants in front of building 40. This year, the meeting took place at CERN from 12 to 16 April. “This year's meeting covered subjects ranging from communication and training in matters of safety, to cryogenic safety, emergency preparedness and risk analysis”, explains Ralf Trant, head of the CERN Safety Commission and organiser of this year’s Forum. Radiation protection issues are not discussed at the meeting since they involve different expertise. The goal of the Forum is to allow participants to share experience, learn lessons and acquire specific knowledge in a very open way. Round-table discussions, dedicated time for ...

  19. Technical tasks in superconducting cavities

    Energy Technology Data Exchange (ETDEWEB)

    Saito, Kenji [High Energy Accelerator Research Organization, Tsukuba, Ibaraki (Japan)

    1997-11-01

    The feature of superconducting rf cavities is an extremely small surface resistance on the wall. It brings a large energy saving in the operation, even those are cooled with liquid helium. That also makes possible to operate themselves in a higher field gradient comparing to normal conducting cavities, and brings to make accelerators compact. These merits are very important for the future accelerator engineering which is planed at JAERI for the neutron material science and nuclear waste transmutation. This machine is a high intensity proton linac and uses sc cavities in the medium and high {beta} sections. In this paper, starting R and D of proton superconducting cavities, several important technical points which come from the small surface resistance of sc cavities, are present to succeed it and also differences between the medium and high - {beta} structures are discussed. (author)

  20. Momentum in Transformation of Technical Infrastructure

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev; Elle, Morten

    1999-01-01

    Current infrastructure holds a considerable momentum and this momentum is a barrier of transformation towards more sustainable technologies and more sustainable styles of network management. Using the sewage sector in Denmark as an example of a technical infrastructure system this paper argues...... that there are technical, economical and social aspects of the current infrastructures momentum....