Resolving issues concerning Eskdalemuir geomagnetic hourly values

Directory of Open Access Journals (Sweden)

S. Macmillan

2011-02-01

Full Text Available The hourly values of the geomagnetic field from 1911 to 1931 derived from measurements made at Eskdalemuir observatory in the UK, and available online from the World Data Centre for Geomagnetism at http://www.wdc.bgs.ac.uk/, have now been corrected. Previously they were 2-point averaged and transformed from the original north, east and vertical down values in the tables in the observatory yearbooks. This paper documents the course of events from discovering the post-processing done to the data to the final resolution of the problem. As it was through the development of a new index, the Inter-Hour Variability index, that this post-processing came to light, we provide a revised series of this index for Eskdalemuir and compare it with that from another European observatory. Conclusions of studies concerning long-term magnetic field variability and inferred solar variability, whilst not necessarily consistent with one another, are not obviously invalidated by the incorrect hourly values from Eskdalemuir. This series of events illustrates the challenges that lie ahead in removing any remaining errors and inconsistencies in the data holdings of different World Data Centres.

Provisional Restorations – A Permanent Problem?

Science.gov (United States)

Keys, William F; Keirby, Naomi; Ricketts, David N J

2016-12-01

Provisional restorations play an important role when providing indirect restorations. There are a number of materials and techniques available for their construction. Careful planning and construction can protect the prepared tooth surface, improve the periodontal condition and help plan for the definitive restoration. A good provisional restoration can save time, money and effort. Clinical relevance: Provisional restoration construction is an integral part of the indirect restorative process for inlays, onlays, crowns and bridges.

Duty Hour Reporting: Conflicting Values in Professionalism.

Science.gov (United States)

Byrne, John M; Loo, Lawrence K; Giang, Dan W

2015-09-01

Duty hour limits challenge professional values, sometimes forcing residents to choose between patient care and regulatory compliance. This may affect truthfulness in duty hour reporting. We assessed residents' reasons for falsifying duty hour reports. We surveyed residents in 1 sponsoring institution to explore the reasons for noncompliance, frequency of violations, falsification of reports, and the residents' awareness of the option to extend hours to care for a single patient. The analysis used descriptive statistics. Linear regression was used to explore falsification of duty hour reports by year of training. The response rate was 88% (572 of 650). Primary reasons for duty hour violations were number of patients (19%) and individual patient acuity/complexity (19%). Junior residents were significantly more likely to falsify duty hours (R = -0.966). Of 124 residents who acknowledged falsification, 51 (41%) identified the primary reason as concern that the program will be in jeopardy of violating the Accreditation Council for Graduate Medical Education (ACGME) duty hour limits followed by fear of punishment (34, 27%). This accounted for more than two-thirds of the primary reasons for falsification. Residents' falsification of duty hour data appears to be motivated by concerns about adverse actions from the ACGME, and fear they might be punished. To foster professionalism, we recommend that sponsoring institutions educate residents about professionalism in duty hour reporting. The ACGME should also convey the message that duty hour limits be applied in a no-blame systems-based approach, and allow junior residents to extend duty hours for the care of individual patients.

Sequential provisional implant prosthodontics therapy.

Science.gov (United States)

Zinner, Ira D; Markovits, Stanley; Jansen, Curtis E; Reid, Patrick E; Schnader, Yale E; Shapiro, Herbert J

2012-01-01

The fabrication and long-term use of first- and second-stage provisional implant prostheses is critical to create a favorable prognosis for function and esthetics of a fixed-implant supported prosthesis. The fixed metal and acrylic resin cemented first-stage prosthesis, as reviewed in Part I, is needed for prevention of adjacent and opposing tooth movement, pressure on the implant site as well as protection to avoid micromovement of the freshly placed implant body. The second-stage prosthesis, reviewed in Part II, should be used following implant uncovering and abutment installation. The patient wears this provisional prosthesis until maturation of the bone and healing of soft tissues. The second-stage provisional prosthesis is also a fail-safe mechanism for possible early implant failures and also can be used with late failures and/or for the necessity to repair the definitive prosthesis. In addition, the screw-retained provisional prosthesis is used if and when an implant requires removal or other implants are to be placed as in a sequential approach. The creation and use of both first- and second-stage provisional prostheses involve a restorative dentist, dental technician, surgeon, and patient to work as a team. If the dentist alone cannot do diagnosis and treatment planning, surgery, and laboratory techniques, he or she needs help by employing the expertise of a surgeon and a laboratory technician. This team approach is essential for optimum results.

Provisional crown failures in dental school predoctoral clinics.

Science.gov (United States)

Hyde, Jeffrey D; Bader, James A; Shugars, Daniel A

2007-11-01

Following a preliminary study indicating that at least 10 percent of single-unit crown temporary restorations failed in patients who received treatment by predoctoral students, a comprehensive examination of provisional crown failure was initiated to identify strategies to reduce the failure rate. For all provisionalized, natural tooth, single-unit crown preparations in University of North Carolina School of Dentistry predoctoral clinics for one year (N=1008), we noted tooth type, type of crown, student level, faculty coverage experience, treatment clinic, temporary material and luting agent, and retreatment (failure) of the provisional restoration. For failures, we also noted the stage of crown preparation at failure and the time since initial placement of the temporary. We analyzed these data using simple cross-tabs and logistic regression on need for retreatment (alpha =0.05). The failure rate was 18.75 percent (N=189). The median time to failure was twelve days; the 25(th) and 75(th) percentiles were six and twenty-six days. Significant risk factors, in order of odds ratio estimates, were molar tooth, second- or third-year student, and inexperienced faculty. Most provisional failures occurred during the final preparation phase of treatment. Provisional restoration failure is more frequent than was initially suspected from preliminary studies. Strategies for institutional intervention to reduce provisional restoration failure include greater attention to evaluating provisional crowns placed by inexperienced students (sophomores and juniors) and placing more emphasis on the retentiveness of provisional restorations reused following the final impression. Review of provisional evaluation procedures is also indicated for faculty who do not routinely supervise these procedures.

42 CFR 431.710 - Provisional licenses.

Science.gov (United States)

2010-10-01

... Licensing Nursing Home Administrators § 431.710 Provisional licenses. To fill a position of nursing home... 42 Public Health 4 2010-10-01 2010-10-01 false Provisional licenses. 431.710 Section 431.710 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES...

Provisional materials: advances lead to extensive options for clinicians.

Science.gov (United States)

Comisi, John C

2015-01-01

The progression of provisional materials to bis-acrylics has lead to such improvements as easier handling, improved compressive and tensile strength, less water sorption, and less shrinkage. The end-result is more options for clinicians for high-quality chairside provisional restorations. Newer provisional materials are easy to manipulate and bring increased comfort to the patient. This review of current products affirms that the choices of provisional materials available for the dental professional today are quite extensive and have advanced the quality of interim restorations.

Biological Effects of Provisional Resin Materials on Human Dental Pulp Stem Cells.

Science.gov (United States)

Jun, S-K; Mahapatra, C; Lee, H-H; Kim, H-W; Lee, J-H

This study investigated the in vitro cytotoxicity as well as the proinflammatory cytokine expression of provisional resin materials on primary cultured human dental pulp stem cells (hDPSCs). Five commercially available provisional resin materials were chosen (SNAP [SN], Luxatemp [LT], Jet [JE], Revotek LC [RL], and Vipi block [VB]). Eluates that were either polymerizing or already set were added to hDPSCs under serially diluted conditions divided into three different setting times (25% set, 50% set, and 100% set) and incubated for 24 hours with 2× concentrated culture media. Cell cytotoxicity tests were performed by LDH assay and live and dead confocal microscope images. The expression of proinflammatory cytokines in SN and VB was measured using cytokine antibody arrays. Data were analyzed using repeated measures analysis of variance (ANOVA) or ANOVA followed by the Tukey post hoc test at a significance level of pprovisional resin materials during polymerization (SN, LT, and JE) were cytotoxic to hDPSCs and may adversely affect pulp tissue.

Techniques of Fabrication of Provisional Restoration: An Overview

Directory of Open Access Journals (Sweden)

K. M. Regish

2011-01-01

Full Text Available A properly fabricated provisional restoration is important in achieving a successful indirect restoration. The importance of provisional restorations as an integral part of fixed prosthodontic treatment is evident from the abundance of the literature pertaining to their importance regarding margin fidelity, function, occlusion, and esthetics. There are a variety of techniques available to suit the individual needs of the clinician and of the clinical situation, from a single unit to a complete-arch provisional fixed prostheses.

8 Hour Ozone Design Value for 1998-2000

Data.gov (United States)

U.S. Environmental Protection Agency — The Ozone design value is based on the average of the annual 4th highest daily 8-hour maximum over a 3-year period (1998-2000) in this case. This is a human health...

Occlusal wear of provisional implant-supported restorations.

Science.gov (United States)

Santing, Hendrik J; Kleverlaan, Cornelis J; Werner, Arie; Feilzer, Albert J; Raghoebar, Gerry M; Meijer, Henny J A

2015-02-01

Implant-supported provisional restorations should be resistant to occlusal wear. The purpose of this laboratory study was to evaluate three-body wear of three indirect laboratory composite resins, five chair side bis-acryl resin-based materials, and two chair side methacrylate-based materials used to fabricate provisional implant-supported restorations. The materials were handled and cured according to the manufacturers' instructions. The three-body wear was measured 1 day, 3 days, 7 days, 4 weeks, and 8 weeks after curing using the ACTA wear device. Wear rate decreased significantly after 8 weeks compared with the first day for all tested materials, except for Estenia C&B. The three-body wear of two indirect laboratory composite resins, that is, Estenia C&B and Solidex, was significantly less compared with all other tested materials used for fabricating provisional implant-supported restorations. Of the chair side materials, the wear rate of Protemp Crown Paste was significantly less compared with the others materials used to fabricate chair side provisional implant-supported restorations. The methacrylate-based materials, Temdent Classic and Trim, showed extreme high wear rates. Based on the results of this laboratory study on long-term wear, the use of indirect composite resin is preferred over chair side methacrylate-based materials when the provisional implant-supported restoration has to be in service for a long period of time. Of the investigated materials, only Estenia C&B and Solidex showed wear rate comparable with posterior resin composites. © 2013 Wiley Periodicals, Inc.

Immediate functional loading of provisional implants in the reconstructed atrophic maxilla: preliminary results of a prospective study after 6 months of loading with a provisional bridge.

Science.gov (United States)

Lenssen, O; Barbier, L; De Clercq, C

2011-09-01

Implant-prosthetic rehabilitation of atrophic maxillae remains a challenging problem. The aim of this paper is to describe a novel treatment for functional rehabilitation of the atrophic maxilla and to discuss preliminary results of this treatment protocol. A prospective pilot study was carried out in 10 patients who underwent bony reconstruction of atrophic maxillae under general anaesthesia, with autologous calvarial bone grafts and simultaneous placement of six provisional implants. The provisional implants were loaded with a provisional acrylic bridge 1 day after surgery. After 6 months, the provisional implants were removed and final implants were placed under local anaesthesia, again in an immediate loading concept with a provisional bridge, followed by a final bridge after another 6 months of healing. The bone grafts integrated well in all 10 patients without infectious complications. The prosthetic survival of the provisional bridge at the time of placing the implants was 100%. All final implants could be placed and immediately loaded with a second provisional bridge. Patient satisfaction was high due to limited postoperative inconvenience and immediate fixed prosthetic rehabilitation. The preliminary results of this pilot study demonstrate that this treatment protocol is a well tolerated treatment for patients with maxillary atrophy desiring dental rehabilitation. Copyright © 2011 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Effects of postpolymerization microwave irradiation on provisional dental acrylics: physical and mechanical properties.

Science.gov (United States)

Ozkomur, Ahmet; Fortes, Carmen Beatriz Borges

2016-07-26

This study aimed to evaluate the effects of microwave irradiation on the physical and mechanical properties of poly(methyl methacrylate) (PMMA) provisional resins. Twenty bars and 20 disc-shaped specimens were fabricated for each selected provisional restorative material (Dencor and Duralay). Test groups were subjected to microwave irradiation (3 minutes at 600 W) after polymerization. Bar specimens were subjected to a flexural strength test. Disc-shaped specimens were used to evaluate microhardness. Backscattered Raman spectroscopy was employed for each group to define the degree of conversion of the monomer/polymer. The frequency bands corresponding to C = C and C = O groups were used to determine the conversion of methyl methacrylate (MMA) monomers into polymers. Glass transition temperature was determined using a differential scanning calorimeter. Microwave irradiation of both tested autopolymerizing PMMA provisional materials resulted in a statistically significant increase in microhardness, degree of conversion and glass transition temperature values. Also, the results demonstrated a significant increase in flexural strength after postpolymerization microwave irradiation for the Dencor specimens. It is concluded that mechanical and physical properties are positively influenced by microwave irradiation.

19 CFR 210.58 - Provisional acceptance of the motion.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Provisional acceptance of the motion. 210.58 Section 210.58 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE ADJUDICATION AND ENFORCEMENT Temporary Relief § 210.58 Provisional acceptance of...

Geomagnetic Absolute Mean Values at Hourly Intervals from 220 Observatories Worldwide

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This file is comprised of absolute mean hourly values of the geomagnetic components D, H and Z or X, Y and Z. These values, on magnetic tape, are available from...

Bacterial adhesion of porphyromonas gingivalis on provisional fixed prosthetic materials

Directory of Open Access Journals (Sweden)

Mustafa Zortuk

2010-01-01

Conclusion : The quantity of bacterial adhesion and surface roughness differed among the assessed provisional fixed prosthodontic materials. The light-polymerized provisional material Revotek LC had rougher surface and more bacterial adhesion compared with the others.

Forecasting Kp from solar wind data: input parameter study using 3-hour averages and 3-hour range values

Science.gov (United States)

Wintoft, Peter; Wik, Magnus; Matzka, Jürgen; Shprits, Yuri

2017-11-01

We have developed neural network models that predict Kp from upstream solar wind data. We study the importance of various input parameters, starting with the magnetic component Bz, particle density n, and velocity V and then adding total field B and the By component. As we also notice a seasonal and UT variation in average Kp we include functions of day-of-year and UT. Finally, as Kp is a global representation of the maximum range of geomagnetic variation over 3-hour UT intervals we conclude that sudden changes in the solar wind can have a big effect on Kp, even though it is a 3-hour value. Therefore, 3-hour solar wind averages will not always appropriately represent the solar wind condition, and we introduce 3-hour maxima and minima values to some degree address this problem. We find that introducing total field B and 3-hour maxima and minima, derived from 1-minute solar wind data, have a great influence on the performance. Due to the low number of samples for high Kp values there can be considerable variation in predicted Kp for different networks with similar validation errors. We address this issue by using an ensemble of networks from which we use the median predicted Kp. The models (ensemble of networks) provide prediction lead times in the range 20-90 min given by the time it takes a solar wind structure to travel from L1 to Earth. Two models are implemented that can be run with real time data: (1) IRF-Kp-2017-h3 uses the 3-hour averages of the solar wind data and (2) IRF-Kp-2017 uses in addition to the averages, also the minima and maxima values. The IRF-Kp-2017 model has RMS error of 0.55 and linear correlation of 0.92 based on an independent test set with final Kp covering 2 years using ACE Level 2 data. The IRF-Kp-2017-h3 model has RMSE = 0.63 and correlation = 0.89. We also explore the errors when tested on another two-year period with real-time ACE data which gives RMSE = 0.59 for IRF-Kp-2017 and RMSE = 0.73 for IRF-Kp-2017-h3. The errors as function

In vitro color stability of provisional restorative materials.

Science.gov (United States)

Jalali, Hamid; Dorriz, Hassan; Hoseinkhezri, Farzaneh; Emadian Razavi, S F

2012-01-01

Discoloration of provisional restorations can result in esthetic problems which are critically important in, for example, anterior areas and may compromise the acceptability of the restoration. The purpose of this study was to investigate the effect of tea on provisional restorative materials. This study was designed to measure the degree of color change of three acrylic resin provisional materials, before and after immersion in artificial saliva and artificial saliva-tea solution for 2 and 4 weeks. Three types of acrylic provisional materials (duralay, tempron, acropars TRP), were studied. Twenty disks (20 ± 0.1 mm by 2 ± 0.05 mm) were fabricated from each material. Specimens were polished with acrylic bur using pumice and diamond polishing paste. Base line color was measured using a spectrophotometer. Ten disks were stored in artificial saliva and 10 were stored in a solution of artificial saliva and tea at room temperature. Color measurements were made after 2 and 4 weeks of immersion. Differences in color changes were compared by two way ANOVA, across the six groups, followed by a Turkey-Kramer's multiple comparison test. For specimens immersed in artificial saliva, the color change of methyl methacrylate materials; duralay (ΔE=4.94) and tempron (ΔE=6.54), was significantly more than butyl methacrylate material; acropars (ΔE=4.10). After immersion in an artificial saliva- tea solution, tempron exhibited less color change (ΔE=8.50) compared to duralay (ΔE=10.93) and acropars (ΔE=15.64). Color stability of methyl methacrylate is higher than butyl methacrylates so if provisional materials are used for extended periods of time; tempron is preferred.

Provisional-Ideal-Point-Based Multi-objective Optimization Method for Drone Delivery Problem

Science.gov (United States)

Omagari, Hiroki; Higashino, Shin-Ichiro

2018-04-01

In this paper, we proposed a new evolutionary multi-objective optimization method for solving drone delivery problems (DDP). It can be formulated as a constrained multi-objective optimization problem. In our previous research, we proposed the "aspiration-point-based method" to solve multi-objective optimization problems. However, this method needs to calculate the optimal values of each objective function value in advance. Moreover, it does not consider the constraint conditions except for the objective functions. Therefore, it cannot apply to DDP which has many constraint conditions. To solve these issues, we proposed "provisional-ideal-point-based method." The proposed method defines a "penalty value" to search for feasible solutions. It also defines a new reference solution named "provisional-ideal point" to search for the preferred solution for a decision maker. In this way, we can eliminate the preliminary calculations and its limited application scope. The results of the benchmark test problems show that the proposed method can generate the preferred solution efficiently. The usefulness of the proposed method is also demonstrated by applying it to DDP. As a result, the delivery path when combining one drone and one truck drastically reduces the traveling distance and the delivery time compared with the case of using only one truck.

Retrospective study investigating the clinical success of two provisional implant systems

OpenAIRE

Hotz, Nadine

2011-01-01

The use of dental implants allows a reliable stabilisation of prosthesis. Usually, definitive implants can´t be used for fixation of prosthesis during their healing period. Therefore, in many cases it is not possible to follow the demand of patients of an immediate loading of definitive implants to avoid a unfixed dental prosthesis. This is one domain of provisional dental implants. The present study of two provisional implant systems approves the benefit of provisional implants during...

Provisional matrix: A role for versican and hyaluronan.

Science.gov (United States)

Wight, Thomas N

2017-07-01

Hyaluronan and versican are extracellular matrix (ECM) components that are enriched in the provisional matrices that form during the early stages of development and disease. These two molecules interact to create pericellular "coats" and "open space" that facilitate cell sorting, proliferation, migration, and survival. Such complexes also impact the recruitment of leukocytes during development and in the early stages of disease. Once thought to be inert components of the ECM that help hold cells together, it is now quite clear that they play important roles in controlling cell phenotype, shaping tissue response to injury and maintaining tissue homeostasis. Conversion of hyaluronan-/versican-enriched provisional matrix to collagen-rich matrix is a "hallmark" of tissue fibrosis. Targeting the hyaluronan and versican content of provisional matrices in a variety of diseases including, cardiovascular disease and cancer, is becoming an attractive strategy for intervention. Copyright © 2016 Elsevier B.V. All rights reserved.

VSRR Provisional Drug Overdose Death Counts

Data.gov (United States)

U.S. Department of Health & Human Services — This data contains provisional counts for drug overdose deaths based on a current flow of mortality data in the National Vital Statistics System. National...

Determination of maximum physiologic thyroid uptake and correlation with 24-hour RAI uptake value

International Nuclear Information System (INIS)

Duldulao, M.; Obaldo, J.

2007-01-01

Full text: In hyperthyroid patients, thyroid uptake values are overestimated, sometimes approaching or exceeding 100%. This is physiologically and mathematically impossible. This study was undertaken to determine the maximum physiologic thyroid uptake value through a proposed simple method using a gamma camera. Methodology: Twenty-two patients (17 females and 5 males), with ages ranging from 19-61 y/o (mean age ± SD; 41 ± 12), with 24-hour uptake value of >50%, clinically hyperthyroid and referred for subsequent radioactive iodine therapy were studied. The computed maximum physiologic thyroid uptake was compared with the 24-hour uptake using the paired Student t-test and evaluated using linear regression analysis. Results: The computed physiologic uptake correlated poorly with the 24-hour uptake value. However, in the male subgroup, there was no statistically significant difference between the two (p=0.77). Linear regression analysis gives the following relationship: physiologic uptake (%) = 77.76 - 0.284 (24-hour RAI uptake value). Conclusion: Provided that proper regions of interest are applied with correct attenuation and background subtraction, determination of physiologic thyroid uptake may be obtained using the proposed method. This simple method may be useful prior to I-131 therapy for hyperthyroidism especially when a single uptake determination is performed. (author)

Effect of Provisional Cements on Shear Bond Strength of Porcelain Laminate Veneers

OpenAIRE

Altintas, Subutay Han; Tak, Onjen; Secilmis, Asli; Usumez, Aslihan

2011-01-01

Objectives: The purpose of this study was to evaluate the effect of three provisional cements and two cleaning techniques on the final bond strength of porcelain laminate veneers. Methods: The occlusal third of the crowns of forty molar teeth were sectioned and embedded in autopolymerizing acrylic resin. Dentin surfaces were polished and specimens were randomly divided into four groups (n=10). Provisional restorations were fabricated and two provisional restorations were cemented onto each to...

The provisional matrix: setting the stage for tissue repair outcomes.

Science.gov (United States)

Barker, Thomas H; Engler, Adam J

2017-07-01

Since its conceptualization in the 1980s, the provisional matrix has often been characterized as a simple fibrin-containing scaffold for wound healing that supports the nascent blood clot and is functionally distinct from the basement membrane. However subsequent advances have shown that this matrix is far from passive, with distinct compositional differences as the wound matures, and providing an active role for wound remodeling. Here we review the stages of this matrix, provide an update on the state of our understanding of provisional matrix, and present some of the outstanding issues related to the provisional matrix, its components, and their assembly and use in vivo. Copyright © 2017. Published by Elsevier B.V.

Provisional prostheses during ridge augmentation and implant dentistry.

Science.gov (United States)

Livada, Rania; Hottel, Timothy L; Shiloah, Jacob

2013-01-01

Recent advancements in ridge augmentation and bone regeneration have expanded the pool of patients that could benefit from dental implants. However, providing the patient with a temporary prosthesis during the wound healing phase without impairing the process is a challenging task. This article summarizes available information pertaining to provisional prostheses, both tooth-supported and soft tissue-supported, that may meet the patient needs. The advantages and disadvantages of each class of prosthesis, along with indications and contraindications, were taken into consideration to aid the restorative dentist in choosing the optimal provisional for their patients.

Correlation of 2 hour, 4 hour, 8 hour and 12 hour urine protein with 24 hour urinary protein in preeclampsia.

Directory of Open Access Journals (Sweden)

Savita Rani Singhal

2014-09-01

Full Text Available To find shortest and reliable time period of urine collection for determination of proteinuria.It is a prospective study carried out on 125 pregnant women with preeclampsia after 20 weeks of gestation having urine albumin >1 using dipstick test. Urine was collected in five different time intervals in colors labeled containers with the assistance of nursing staff; the total collection time was 24 hours. Total urine protein of two-hour, four-hour, eight-hour, 12-hour and 24-hour urine was measured and compared with 24-hour collection. Data was analyzed using the Pearson correlation coefficient.There was significant correlation (p value < 0.01 in two, four, eight and 12-hour urine protein with 24-urine protein, with correlation coefficient of 0.97, 0.97, 0.96 and 0.97, respectively. When a cut off value of 25 mg, 50 mg. 100 mg, and 150 mg for urine protein were used for 2-hour, 4-hours, 8-hour and 12-hour urine collection, a sensitivity of 92.45%, 95.28%, 91.51%, and 96.23% and a specificity of 68.42%, 94.74%, 84.21% and 84.21% were obtained, respectively.Two-hour urine proteins can be used for assessment of proteinuria in preeclampsia instead of gold standard 24-hour urine collection for early diagnosis and better patient compliance.

In vitro color stability of provisional restorative materials

Directory of Open Access Journals (Sweden)

Hamid Jalali

2012-01-01

Aims: The purpose of this study was to investigate the effect of tea on provisional restorative materials. Setting and Design: This study was designed to measure the degree of color change of three acrylic resin provisional materials, before and after immersion in artificial saliva and artificial saliva-tea solution for 2 and 4 weeks. Materials and Methods : Three types of acrylic provisional materials (duralay, tempron, acropars TRP, were studied. Twenty disks (20±0.1 mm by 2±0.05 mm were fabricated from each material. Specimens were polished with acrylic bur using pumice and diamond polishing paste. Base line color was measured using a spectrophotometer. Ten disks were stored in artificial saliva and 10 were stored in a solution of artificial saliva and tea at room temperature. Color measurements were made after 2 and 4 weeks of immersion. Statistical analysis used: Differences in color changes were compared by two way ANOVA, across the six groups, followed by a Turkey-Kramer′s multiple comparison test. Results: For specimens immersed in artificial saliva, the color change of methyl methacrylate materials; duralay (ΔE=4.94 and tempron (ΔE=6.54, was significantly more than butyl methacrylate material; acropars (ΔE=4.10. After immersion in an artificial saliva- tea solution, tempron exhibited less color change (ΔE=8.50 compared to duralay (ΔE=10.93 and acropars (ΔE=15.64. Conclusion: Color stability of methyl methacrylate is higher than butyl methacrylates so if provisional materials are used for extended periods of time; tempron is preferred.

An indirect technique for assuring simplicity and marginal integrity of provisional restorations during full mouth rehabilitation.

Science.gov (United States)

Al Jabbari, Youssef S; Al-Rasheed, Abdulaziz; Smith, Jesse W; Iacopino, Anthony M

2013-01-01

Full mouth rehabilitation with fixed prosthodontics can be a time- and labor-intensive process. The use of provisional restorations allows the treating clinician to determine the functional and esthetic requirements of the definitive prostheses. However, in the case of full mouth rehabilitation, the individual preparation of provisional restorations for multiple teeth may complicate the provisional phase and increase the treatment time. This article describes a method to simplify the indirect fabrication of provisional restorations for full mouth reconstruction. Provisional restorations may be easily achieved by splinting the provisional restorations in sextants, trimming them according to red pencil marks around the prepared margins as guidelines, and fitting them in the laboratory, utilizing a second set of solid casts for the prepared teeth.

Production of a Fixed Provisional Restoration Using an Acrylic Denture: Technique and Case Report.

Science.gov (United States)

Kocaagaoglu, Hasan

2015-07-01

The damage or loss of anterior teeth causes a negative impact on the patient in many ways. In adolescents and young patients, the provisional replacement with artificial teeth may minimize this impact. Many approaches have been described for provisional restorations. This article discusses about a chairside fixed provisional restoration technique that was adjusted into the edentulous area of a 15-year-old girl.

The use of definitive implant abutments for the fabrication of provisional crowns: a case series.

Science.gov (United States)

Bilhan, Hakan; Geckili, Onur; Mumcu, Emre

2011-10-01

The anterior region is a challenge for most clinicians to achieve optimal esthetics with dental implants. The provisional crown is a key factor in the success of obtaining pink esthetics around restorations with single implants, by soft tissue and inter-proximal papilla shaping. Provisional abutments bring additional costs and make the treatment more expensive. Since one of the aims of the clinician is to reduce costs and find more economic ways to raise patient satisfaction, this paper describes a practical method for chair-side fabrication of non-occlusal loaded provisional crowns used by the authors for several years successfully. Twenty two patients (9 males, 13 females; mean age, 36,72 years) with one missing anterior tooth were treated by using the presented method. Metal definitive abutments instead of provisional abutments were used and provisional crowns were fabricated on the definitive abutments for all of the patients. The marginal fit was finished on a laboratory analogue and temporarily cemented to the abutments. The marginal adaptation of the crowns was evaluated radiographically. The patients were all satisfied with the final appearance and no complications occurred until the implants were loaded with permanent restorations. The use of the definitive abutments for provisional crowns instead of provisional abutments reduces the costs and the same results can be obtained.

Esthetic Outcome of Implant Supported Crowns With and Without Peri-Implant Conditioning Using Provisional Fixed Prosthesis: A Randomized Controlled Clinical Trial.

Science.gov (United States)

Furze, David; Byrne, Ashley; Alam, Sonia; Wittneben, Julia-Gabriela

2016-12-01

Achieving an optimal esthetic result using dental implants is challenging. Fixed implant-supported provisional crowns are often used to customize the emergence profile and to individualize the surrounding peri-implant soft tissue. The objective of this study is to evaluate whether the use of a provisional implant-supported crown leads to an esthetic benefit on implants that are placed in the esthetic zone. The null hypothesis is that there is no-difference between the two study groups. Twenty single implants (Bone Level, Straumann AG, Basel, Switzerland) were inserted in consecutive patients. After reopening, a randomization process assigned them to either cohort group 1: a provisional phase with soft tissue conditioning using the "dynamic compression technique" or cohort group 2: without a provisional. Implants were finally restored with an all-ceramic crown. Follow-up examinations were performed at 3 and 12 months including implant success and survival, clinical, and radiographic parameters. After 1 year all implants successfully integrated, mean values of combined modPES and WES were 16.7 for group 1 and 10.5 for Group 2. This was statistically significant. Mean bone loss after 1 year was -0.09 and -0.08 for groups 1 and 2, respectively, without being statistically significant. A provisional phase with soft tissue conditioning does improve the final esthetic result. © 2016 Wiley Periodicals, Inc.

Bacterial Adhesion of Porphyromonas Gingivalis on Provisional Fixed Prosthetic Materials

OpenAIRE

Zortuk, Mustafa; Kesim, Servet; Kaya, Esma; Özbilge, Hatice; Kiliç, Kerem; Çölgeçen, Özlem

2010-01-01

Background: When provisional restorations are worn for long term period, the adhesion of bacteria becomes a primary factor in the development of periodontal diseases. The aims of this study were to evaluate the surface roughness and bacterial adhesion of four different provisional fixed prosthodon-tic materials. Methods: Ten cylindrical specimens were prepared from bis-acrylic composites (PreVISION CB and Protemp 3 Garant), a light-polymerized composite (Revotek LC), and a polymethyl metha...

Gingival recontouring by provisional implant restoration for optimal emergence profile: report of two cases.

Science.gov (United States)

Son, Mee-Kyoung; Jang, Hyun-Seon

2011-12-01

The emergence profile concept of an implant restoration is one of the most important factors for the esthetics and health of peri-implant soft tissue. This paper reports on two cases of gingival recontouring by the fabrication of a provisional implant restoration to produce an optimal emergence profile of a definitive implant restoration. After the second surgery, a preliminary impression was taken to make a soft tissue working cast. A provisional crown was fabricated on the model. The soft tissue around the implant fixture on the model was trimmed with a laboratory scalpel to produce the scalloped gingival form. Light curing composite resin was added to fill the space between the provisional crown base and trimmed gingiva. After 4 to 6 weeks, the final impression was taken to make a definitive implant restoration, where the soft tissue and tooth form were in harmony with the adjacent tooth. At the first insertion of the provisional restoration, gum bleaching revealed gingival pressure. Four to six weeks after placing the provisional restoration, the gum reformed with harmony between the peri-implant gingiva and adjacent dentition. Gingival recontouring with a provisional implant restoration is a non-surgical and non-procedure-sensitive method. The implant restoration with the optimal emergence profile is expected to provide superior esthetic and functional results.

Comparative in vitro evaluation of CAD/CAM vs conventional provisional crowns

Directory of Open Access Journals (Sweden)

Adil Othman ABDULLAH

Full Text Available ABSTRACT Objective This study compared the marginal gap, internal fit, fracture strength, and mode of fracture of CAD/CAM provisional crowns with that of direct provisional crowns. Material and Methods An upper right first premolar phantom tooth was prepared for full ceramic crown following tooth preparation guidelines. The materials tested were: VITA CAD-Temp®, Polyetheretherketone “PEEK”, Telio CAD-Temp, and Protemp™4 (control group. The crowns were divided into four groups (n=10, Group1: VITA CAD-Temp®, Group 2: PEEK, Group 3: Telio CAD-Temp, and Group 4: Protemp™4. Each crown was investigated for marginal and internal fit, fracture strength, and mode of fracture. Statistical analysis was performed using GraphPad Prism software version 6.0. Results The average marginal gap was: VITA CAD-Temp® 60.61 (±9.99 µm, PEEK 46.75 (±8.26 µm, Telio CAD-Temp 56.10 (±5.65 µm, and Protemp™4 193.07(±35.96 µm (P0.05. Conclusions CAD/CAM fabricated provisional crowns demonstrated superior fit and better strength than direct provisional crowns.

Technique for making full-coverage provisional restorations on teeth with insufficient clinical crowns.

Science.gov (United States)

Feinberg, Edward

2010-11-01

Provisional restorations fabricated with copper bands are tremendous practice builders, eliminating the sensitivity, recurrent decay and poor retention that are common with conventional temporary restorations. The copper-band provisional restoration is the ideal choice when conventional butt-joint temporary restorations are unsuitable. The technique for making this restoration is demonstrated in this article with a step-by-step "how-to" description. An analysis of the basic principles and theories behind the success of the copper band provisional restoration is also presented, as well as a discussion of the restoration's advantages and disadvantages.

75 FR 26939 - Target Corporation: Provisional Acceptance of a Settlement Agreement and Order

Science.gov (United States)

2010-05-13

... CONSUMER PRODUCT SAFETY COMMISSION [CPSC Docket No. 09-C0037] Target Corporation: Provisional...(e). Published below is a provisionally-accepted Settlement Agreement with Target Corporation..., Target Corporation (``Target '') and the staff (``Staff '') of the United States Consumer Product Safety...

VSRR - Quarterly provisional estimates for infant mortality

Data.gov (United States)

U.S. Department of Health & Human Services — Provisional estimates of infant mortality (deaths of infants under 1 year per 1,000 live births), neonatal mortality (deaths of infants aged 0-27 days per 1,000 live...

VSRR - Quarterly provisional estimates for selected birth indicators

Data.gov (United States)

U.S. Department of Health & Human Services — Provisional estimates of selected reproductive indicators. Estimates are presented for: general fertility rates, age-specific birth rates, total and low risk...

Occlusal wear of provisional implant-supported restorations

NARCIS (Netherlands)

Santing, Hendrik J.; Kleverlaan, Cornelis J.; Werner, Arie; Feilzer, Albert J.; Raghoebar, Gerry M.; Meijer, Henny J. A.

BACKGROUND: Implant-supported provisional restorations should be resistant to occlusal wear. PURPOSE: The purpose of this laboratory study was to evaluate three-body wear of three indirect laboratory composite resins, five chair side bis-acryl resin-based materials, and two chair side

Creating Esthetic Harmony with Nonloading, Fixed Provisional Restoration using Extracted Teeth after Immediate Implant Placement.

Science.gov (United States)

Satwalekar, Parth; Satwalekar, Tanushree; Bondugula, Vasanthi; Bhuvaneshwari, B; Harshavardhan, K V; Pasula, Kiran

2016-04-01

To make use of fiber-reinforced composite and the patient's own extracted teeth in fabricating a provisional restoration following immediate implant placement. Fiber-reinforced composites offer various possibilities in temporization of osseointegrating implants in the esthetic zone. In this chairside technique, the patient's own extracted teeth with fiber-reinforced composite were used to fabricate a provisional restoration after immediate implant placement. A putty index was made before extracting the teeth and placing the implants as planned. The index and crowns of the extracted teeth were used to make a nonloading, esthetic, chair-side provisional restoration after immediate implant placement. By using the patient's own teeth for pro-visionalization immediately after implant placement, acceptance is greatly enhanced.

Alleviating gizzard erosion with Hepasan ® - Provisional ...

African Journals Online (AJOL)

Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. DOWNLOAD FULL TEXT Open Access DOWNLOAD FULL TEXT Subscription or Fee Access. Alleviating gizzard erosion with Hepasan® - Provisional Communication. K Boa-Amponsem, A Osei-Somuah. Full Text:.

45 CFR 264.70 - What makes a State eligible to receive a provisional payment of contingency funds?

Science.gov (United States)

2010-10-01

... provisional payment of contingency funds? 264.70 Section 264.70 Public Welfare Regulations Relating to Public... Contingency Fund? § 264.70 What makes a State eligible to receive a provisional payment of contingency funds? (a) In order to receive a provisional payment of contingency funds, a State must: (1) Be a needy...

Evaluation of the Luting Cement Space for Provisional Restoration by using Various Coats of Die Spacer Materials-An Invitro Study.

Science.gov (United States)

Chiramana, Sandeep; Siddineni, Krishna Chaitanya; Jyothula, Ravi Rakesh Dev; Gade, Phani Krishna; Bhupathi, Deepthi; Kondaka, Sudheer; Hussain, Zakir; Paluri, Geetha Bhavani

2014-09-01

The present study was to evaluate the space provided for the temporary luting cement, after the application of various coats of die spacers, during the fabrication of provisional crowns and bridges. A total of 50 specimens of dental stone with provisional crowns on all these samples were prepared and were divided into five groups based on the application of various coats of different die spacers. Later these specimens were sectioned buccolingually and were observed using a stereomicroscope under 100X magnification. The images thus obtained were evaluated and noted for the amount of space between the inner surface of the provisional crown and the specimens at five different locations using Image Pro 6.0 Express software and the values were subjected to one-way ANOVA test, and unpaired t-test. There was a significant increase of luting space thickness with various die spacer applications than the specimens of control group. Specimens of double coat applications of silver and gold die spacers showed higher luting cement space than the separating media application specimens.

Increasing Immunization Compliance by Reducing Provisional Admittance

Science.gov (United States)

Davis, Wendy S.; Varni, Susan E.; Barry, Sara E.; Frankowski, Barbara L.; Harder, Valerie S.

2016-01-01

Students in Vermont with incomplete or undocumented immunization status are provisionally admitted to schools and historically had a calendar year to resolve their immunization status. The process of resolving these students' immunization status was challenging for school nurses. We conducted a school-based quality improvement effort to increase…

Comparison of a priori versus provisional heparin therapy on radial artery occlusion after transradial coronary angiography and patent hemostasis (from the PHARAOH Study).

Science.gov (United States)

Pancholy, Samir B; Bertrand, Olivier F; Patel, Tejas

2012-07-15

Systemic anticoagulation decreases the risk of radial artery occlusion (RAO) after transradial catheterization and standard occlusive hemostasis. We compared the efficacy and safety of provisional heparin use only when the technique of patent hemostasis was not achievable to standard a priori heparin administration after radial sheath introduction. Patients referred for coronary angiography were randomized in 2 groups. In the a priori group, 200 patients received intravenous heparin (50 IU/kg) immediately after sheath insertion. In the provisional group, 200 patients did not receive heparin during the procedure. After sheath removal, hemostasis was obtained using a TR band (Terumo corporation, Tokyo, Japan) with a plethysmography-guided patent hemostasis technique. In the provisional group, no heparin was given if radial artery patency could be obtained and maintained. If radial patency was not achieved, a bolus of heparin (50 IU/kg) was given. Radial artery patency was evaluated at 24 hours (early RAO) and 30 days after the procedure (late RAO) by plethysmography. Patent hemostasis was obtained in 67% in the a priori group and 74% in the provisional group (p = 0.10). Incidence of RAO remained similar in the 2 groups at the early (7.5% vs 7.0%, p = 0.84) and late (4.5% vs 5.0%, p = 0.83) evaluations. Women, patients with diabetes, patients having not received heparin, and patients without radial artery patency during hemostasis had more RAO. By multivariate analysis, patent radial artery during hemostasis (odds ratio [OR] 0.03, 95% confidence interval [CI] 0.004 to 0.28, p = 0.002) and diabetes (OR 11, 95% CI 3 to 38,p patent hemostasis is maintained. Copyright © 2012 Elsevier Inc. All rights reserved.

Graduate Periodontics Programs' Integration of Implant Provisionalization in Core Curricula: Implementation of CODA Standard 4-10.2.d.

Science.gov (United States)

Barwacz, Christopher A; Pantzlaff, Ed; Allareddy, Veerasathpurush; Avila-Ortiz, Gustavo

2017-06-01

The aim of this descriptive study was to provide an overview of the status of implementation of Commission on Dental Accreditation (CODA) Standard 4-10.2.d (Provisionalization of Dental Implants) by U.S. graduate periodontics programs since its introduction in 2013. Surveys were sent in May 2015 to 56 accredited postdoctoral periodontics program directors to ascertain program director characteristics; status of planning, implementation, and curriculum resulting from adoption of Standard 4-10.2.d; preferred clinical protocols for implant provisionalization; interdisciplinary educational collaborators; and competency assessment mechanisms. The survey response rate was 52% (N=29); the majority were male, aged 55 or older, and had held their position for less than ten years. Among the responding programs, 93% had formal educational curricula established in implant provisionalization. Graduate periodontics (96%) and prosthodontics (63%) faculty members were predominantly involved with curriculum planning. Of these programs, 96% used immediate implant provisionalization, with direct (chairside) provisionalization protocols (86%) being preferred over indirect protocols (14%) and polyethylethylketone provisional abutments (75%) being preferred to titanium (25%) provisional abutments. Straight and concave transmucosal emergence profile designs (46% each) were preferred in teaching, with only 8% of programs favoring convex transmucosal profiles. A majority of responding programs (67%) lacked protocols for communicating to the restorative referral a mechanism to duplicate the mature peri-implant mucosal architecture. Regional location did not play a significant role in any educational component related to implant provisionalization for these graduate periodontal programs. Overall, this study found that a clear majority of graduate periodontics programs had established formal curricula related to implant provisionalization, with substantial clinical and philosophical consensus

Microleakage of different provisionalization techniques for class I inlays

Directory of Open Access Journals (Sweden)

Selim Erkut

2013-03-01

Conclusion: The microleakage in class I inlay cavities could be reduced by the application of dentin-bonding agents after cavity preparation followed by the placement of light-polymerized provisional restorative materials.

Comparative evaluation of marginal leakage of provisional crowns cemented with different temporary luting cements: In vitro study.

Science.gov (United States)

Arora, Sheen Juneja; Arora, Aman; Upadhyaya, Viram; Jain, Shilpi

2016-01-01

As, the longevity of provisional restorations is related to, a perfect adaptation and a strong, long-term union between restoration and teeth structures, therefore, evaluation of marginal leakage of provisional restorative materials luted with cements using the standardized procedures is essential. To compare the marginal leakage of the provisional crowns fabricated from Autopolymerizing acrylic resin crowns and bisphenol A-glycidyl dimethacrylate (BIS-GMA) resin crowns. To compare the marginal leakage of the provisional crowns fabricated from autopolymerizing acrylic resin crowns and BIS-GMA resin crowns cemented with different temporary luting cements. To compare the marginal leakage of the provisional crowns fabricated from autopolymerizing acrylic resin (SC-10) crowns cemented with different temporary luting cements. To compare the marginal leakage of the provisional crowns fabricated from BIS-GMA resin crowns (Protemp 4) cemented with different temporary luting cements. Freshly extracted 60 maxillary premolars of approximately similar dimensions were mounted in dental plaster. Tooth reduction with shoulder margin was planned to use a customized handpiece-holding jig. Provisional crowns were prepared using the wax pattern fabricated from computer aided designing/computer aided manufacturing milling machine following the tooth preparation. Sixty provisional crowns were made, thirty each of SC-10 and Protemp 4 and were then cemented with three different luting cements. Specimens were thermocycled, submerged in a 2% methylene blue solution, then sectioned and observed under a stereomicroscope for the evaluation of marginal microleakage. A five-level scale was used to score dye penetration in the tooth/cement interface and the results of this study was analyzed using the Chi-square test, Mann-Whitney U-test, Kruskal-Wallis H-test and the results were statistically significant P provisional crowns cemented with three different luting cements along the axial walls of

Evaluation of Vertical Marginal Adaptation of Provisional Crowns by ...

African Journals Online (AJOL)

2018-01-30

Jan 30, 2018 ... Department of Prosthetic Dental Sciences, College of Dentistry, ... discrepancies compared to dimethacrylates, some of ... whereas one study shows bis‑acryl composite resin to .... The provisionals were finished with acrylic.

Coronal leakage of provisional restorative materials used in endodontics with and without intracanal medication after exposure to human saliva

Directory of Open Access Journals (Sweden)

P Udayakumar

2016-01-01

Full Text Available Aim: To determine the coronal leakage of various provisional restorations with and without intracanal medication over time after being exposed to human saliva. Materials and Methods: This study investigated Coltosol F, Cavit, Ketac Molar, and IRM as provisional restorative material. Calcium hydroxide and chlorhexidine were used as an intracanal medicament. Ninety-eight single rooted teeth were randomly selected and then mounted in an apparatus that isolated the crown portion of the tooth. Provisional restorative materials were placed in the access cavity following manufacturer guidelines after placement of intracanal medicament. Human saliva and brain heart infusion broth in 3:1 ratio were applied to the samples, incubated at 37°C, and results were tabulated over the course of 4 weeks by the appearance of turbidity in the lower part of the apparatus. Statistical Analysis: The data were statistically analyzed using proportional Z-test. The level of significance was set at 0.05. Results: Coltosol F and Cavit could significantly prevent the bacterial leakage up to a period of 7 days with a P value of 0.01 and 0.005, respectively. Bacterial recontamination was relatively less in the samples treated with intracanal medicaments up to 14 days. After 14 days, however, all materials leaked in over half of the samples. Conclusion: No provisional restorative material can be considered superior in providing a reliable seal after 14 days. Inter-appointments schedule should not extend beyond 2 weeks and after endodontic therapy final restoration should be completed within 1 week.

Provisional energy balance of France for 2002

International Nuclear Information System (INIS)

2003-01-01

A provisional energy accounting in France for 2002 is presented. Statistical data and diagrams are provided to detail and discuss the economical and energy context, the primary energy consumption, the national production and the energy dependence, the primary energy consumption for each energy source, the sectorial analysis of the energy consumption and the carbon dioxide emissions. (A.L.B.)

VSRR - Quarterly provisional estimates for selected indicators of mortality

Data.gov (United States)

U.S. Department of Health & Human Services — Provisional estimates of death rates. Estimates are presented for each of the 15 leading causes of death plus estimates for deaths attributed to drug overdose, falls...

Work Hours, Social Value of Leisure and Globalisation

DEFF Research Database (Denmark)

Hansen, Jørgen Drud; Nielsen, Jørgen Ulff-Møller; Montagna, Catia

We examine how openness interacts with the coordination of consumption-leisure decisions in determining the equilibrium working hours and wage rate when there are leisure externalities (e.g., due to social interactions). The latter are modelled by allowing a worker's marginal utility of leisure...... to be increasing in the leisure time taken by other workers. Coordination takes the form of internalising the leisure externality and other relevant constraints (e.g., labour demand). The extent of openness is measured by the degree of capital mobility. We find that: coordination lowers equilibrium work hours...... and raises the wage rate; there is a U-shaped (inverse-U-shaped) relationship between work hours (wages) and the degree of coordination; coordination is welfare improving; and, the gap between the coordinated and uncoordinated work hours (and the corresponding wage rates) is affected by the extent and nature...

Work Hours, Social Value of Leisure and Globalisation

DEFF Research Database (Denmark)

Hansen, Jørgen Drud; Molana, Hassan; Montagna, Catia

2010-01-01

We examine how openness interacts with the coordination of consumption-leisure decisions in determining the equilibrium working hours and wage rate when there are leisure externalities (e.g., due to social interactions). The latter are modelled by allowing a worker's marginal utility of leisure...... to be increasing in the leisure time taken by other workers. Coordination takes the form of internalising the leisure externality and other relevant constraints (e.g., labour demand). The extent of openness is measured by the degree of capital mobility. We find that: coordination lowers equilibrium work hours...... and raises the wage rate; there is a U-shaped (inverse-U-shaped) relationship between work hours (wages) and the degree of coordination; coordination is welfare improving; and, the gap between the coordinated and uncoordinated work hours (and the corresponding wage rates) is affected by the extent and nature...

Work hours, social value of leisure and globalisation

DEFF Research Database (Denmark)

Hansen, Jørgen Drud; Molana, Hassan; Montagna, Catia

2012-01-01

We examine how openness interacts with the coordination of consumption-leisure decisions in determining the equilibrium working hours and wage rate when there are leisure externalities (e.g., due to social interactions). The latter are modelled by allowing a worker’s marginal utility of leisure...... to be increasing in the leisure time taken by other workers. Coordination takes the form of internalising the leisure externality and other relevant constraints (e.g., labour demand). The extent of openness is measured by the degree of capital mobility. We find that: coordination lowers equilibrium work hours...... and raises the wage rate; there is a U-shaped (inverse-U-shaped) relationship between work hours (wages) and the degree of coordination; coordination is welfare improving; and, the gap between the coordinated and uncoordinated work hours (and the corresponding wage rates) is affected by the extent and nature...

Comparative Computed Flow Dynamic Analysis of Different Optimization Techniques in Left Main Either Provisional or Culotte Stenting.

Science.gov (United States)

Rigatelli, Gianluca; Dell'Avvocata, Fabio; Zuin, Marco; Giatti, Sara; Duong, Khanh; Pham, Trung; Tuan, Nguyen Si; Vassiliev, Dobrin; Daggubati, Ramesh; Nguyen, Thach

2017-12-01

Provisional and culotte are the most commonly used techniques in left main (LM) stenting. The impact of different post-dilation techniques on fluid dynamic of LM bifurcation has not been yet investigated. The aim of this study is to evaluate, by means of computational fluid dynamic analysis (CFD), the impact of different post-dilation techniques including proximal optimization technique (POT), kissing balloon (KB), POT-Side-POT and POT-KB-POT, 2-steps Kissing (2SK) and Snuggle Kissing balloon (SKB) on flow dynamic profile after LM provisional or culotte stenting. We considered an LM-LCA-LCX bifurcation reconstructed after reviewing 100 consecutive patients (mean age 71.4 ± 9.3 years, 49 males) with LM distal disease. The diameters of LAD and LCX were modelled according to the Finnet's law as following: LM 4.5 mm, LAD 3.5 mm, LCX 2.75 mm, with bifurcation angle set up at 55°. Xience third-generation stent (Abbot Inc., USA) was reconstructed and virtually implanted in provisional/cross-over and culotte fashion. POT, KB, POT-side-POT, POT-KB-POT, 2SK and SKB were virtually applied and analyzed in terms of the wall shear stress (WSS). Analyzing the provisional stenting, the 2SK and KB techniques had a statistically significant lower impact on the WSS at the carina, while POT seemed to obtain a neutral effect. In the wall opposite to the carina, the more physiological profile has been obtained by KB and POT with higher WSS value and smaller surface area of the lower WSS. In culotte stenting, at the carina, POT-KB-POT and 2SK had a very physiological profile; while at the wall opposite to the carina, 2SK and POT-KB-POT decreased significantly the surface area of the lower WSS compared to the other techniques. From the fluid dynamic point of view in LM provisional stenting, POT, 2SK and KB showed a similar beneficial impact on the bifurcation rheology, while in LM culotte stenting, POT-KB-POT and 2SK performed slightly better than the other techniques, probably

Physiologically-based pharmacokinetic model for Fentanyl in support of the development of Provisional Advisory Levels

International Nuclear Information System (INIS)

Shankaran, Harish; Adeshina, Femi; Teeguarden, Justin G.

2013-01-01

Provisional Advisory Levels (PALs) are tiered exposure limits for toxic chemicals in air and drinking water that are developed to assist in emergency responses. Physiologically-based pharmacokinetic (PBPK) modeling can support this process by enabling extrapolations across doses, and exposure routes, thereby addressing gaps in the available toxicity data. Here, we describe the development of a PBPK model for Fentanyl – a synthetic opioid used clinically for pain management – to support the establishment of PALs. Starting from an existing model for intravenous Fentanyl, we first optimized distribution and clearance parameters using several additional IV datasets. We then calibrated the model using pharmacokinetic data for various formulations, and determined the absorbed fraction, F, and time taken for the absorbed amount to reach 90% of its final value, t90. For aerosolized pulmonary Fentanyl, F = 1 and t90 50 human datasets. • Model predictions are in good agreement with the available pharmacokinetic data. • The model can be used for extrapolating across routes, doses and exposure durations. • We illustrate how the model can be used for developing Provisional Advisory Levels

Provisional host catalogue of Fig wasps (Hymenoptera, Chalcidoidea)

NARCIS (Netherlands)

Wiebes, J.T.

1966-01-01

INTRODUCTION In this catalogue — entitled "provisional" because our knowledge of the subject is still so evidently incomplete — all species of Ficus mentioned as hosts of fig wasps, are listed with the Hymenoptera Chalcidoidea reared from their receptacles. The names used for the Agaonidae are in

Comparative in vitro evaluation of CAD/CAM vs conventional provisional crowns.

Science.gov (United States)

Abdullah, Adil Othman; Tsitrou, Effrosyni A; Pollington, Sarah

2016-01-01

This study compared the marginal gap, internal fit, fracture strength, and mode of fracture of CAD/CAM provisional crowns with that of direct provisional crowns. An upper right first premolar phantom tooth was prepared for full ceramic crown following tooth preparation guidelines. The materials tested were: VITA CAD-Temp®, Polyetheretherketone "PEEK", Telio CAD-Temp, and Protemp™4 (control group). The crowns were divided into four groups (n=10), Group1: VITA CAD-Temp®, Group 2: PEEK, Group 3: Telio CAD-Temp, and Group 4: Protemp™4. Each crown was investigated for marginal and internal fit, fracture strength, and mode of fracture. Statistical analysis was performed using GraphPad Prism software version 6.0. The average marginal gap was: VITA CAD-Temp® 60.61 (±9.99) µm, PEEK 46.75 (±8.26) µm, Telio CAD-Temp 56.10 (±5.65) µm, and Protemp™4 193.07(±35.96) µm (PCAD-Temp® 124.94 (±22.96) µm, PEEK 113.14 (±23.55) µm, Telio CAD-Temp 110.95 (±11.64) µm, and Protemp™4 143.48(±26.74) µm. The average fracture strength was: VITA CAD-Temp® 361.01 (±21.61) N, PEEK 802.23 (±111.29) N, Telio CAD-Temp 719.24 (±95.17) N, and Protemp™4 416.40 (±69.14) N. One-way ANOVA test showed a statistically significant difference for marginal gap, internal gap, and fracture strength between all groups (p0.05). CAD/CAM fabricated provisional crowns demonstrated superior fit and better strength than direct provisional crowns.

Influence of immediate loading on provisional restoration in dental implant stability

Science.gov (United States)

Ikbal, M.; Odang, R. W.; Indrasari, M.; Dewi, R. S.

2017-08-01

The success of dental implant treatment is determined by the primary stability at placement. One factor that could influence this stability is occlusal loading through provisional restoration. Two types of loading protocols are usually used: immediate and delayed loading. However, some controversies remain about the influence of occlusal loading on implant stability. Therefore, the influence of immediate loading on implant stability must be studied. An animal study was conducted by placing nine dental implants in the mandibular jaw of three Macaca fascicularis. Provisional restorations with various occlusal contacts (no, light, and normal contact) were placed on the implant. The implant stability was measured using the Ostell ISQ three times: immediately (baseline) and at the first and second months after implant placement. The implant stability between implants with no and normal occlusal contact as well as light and normal occlusal contact showed significant differences (p implant placement. However, no significant increase (p > 0.05) in implant stability was seen at the baseline and the first and second months after implant placement for all occlusal contact groups. Immediate loading influenced the implant stability, and provisional restoration of implant without occlusal contact showed the highest implant stability.

Effect of different provisional cement remnant cleaning procedures including Er:YAG laser on shear bond strength of ceramics

OpenAIRE

Zortuk, Mustafa; Gumus, Hasan Onder; Kilinc, Halil Ibrahim; Tuncdemir, Ali Riza

2012-01-01

PURPOSE The purpose of this study was to evaluate the effect of provisional cement removal by different dentin cleaning protocols (dental explorer, pumice, cleaning bur, Er:YAG laser) on the shear bond strength between ceramic and dentin. MATERIALS AND METHODS In total, 36 caries-free unrestored human third molars were selected as tooth specimens. Provisional restorations were fabricated and cemented with eugenol-free provisional cement. Then, disc-shaped ceramic specimens were fabricated and...

10 CFR 903.21 - Completion of rate development; provisional rates.

Science.gov (United States)

2010-01-01

... business principles. The rates shall be submitted promptly to the FERC for confirmation and approval on a..., Southwestern, and Western Area Power Administrations § 903.21 Completion of rate development; provisional rates...

Implant rehabilitation of the atrophic edentulous maxilla including immediate fixed provisional restoration without the use of bone grafting: a review of 1-year outcome data from a long-term prospective clinical trial.

Science.gov (United States)

Toljanic, Joseph A; Baer, Russell A; Ekstrand, Karl; Thor, Andreas

2009-01-01

The literature suggests that predictable integration can be achieved when dental implant placement is combined with immediate fixed provisional restoration in a variety of clinical situations. Fewer data are available, however, regarding outcomes for immediate provisional restoration of implants in the edentulous maxilla. This report presents 1-year data acquired from a long-term prospective clinical trial designed to assess outcomes following the immediate provisional fixed restoration of implants in the atrophic edentulous maxilla without the use of bone augmentation. Fifty-one subjects diagnosed with an atrophic edentulous maxilla received a total of 306 implants (six implants per subject) followed by fixed provisional restoration within 24 hours of implant placement. No subjects underwent grafting to enhance bone volume in preparation for implant treatment. Data acquired included bone quantity and quality, implant dimensions, implant locations, and implant placement stability. Subjects returned for 1-year follow-up examinations to assess implant integration and restoration function. Periapical radiographs were obtained and compared to baseline images to assess marginal bone height maintenance. At the 3-month follow-up examination, 294 of 306 implants placed in 51 subjects were found to be integrated. This represents a cumulative implant survival rate of 96%. At the 1-year follow-up examination, mean marginal bone loss of 0.5 mm was noted, with no further loss of implants. These results support the contention that predictable long-term outcomes may be obtained for the atrophic edentulous maxilla when treated with an implant rehabilitation protocol that includes immediate fixed provisional restoration without the use of bone grafting. This strategy offers a promising treatment alternative for the patient with an atrophic edentulous maxilla.

Mechanical properties of provisional dental materials: A systematic review and meta-analysis.

Science.gov (United States)

Astudillo-Rubio, Daniela; Delgado-Gaete, Andrés; Bellot-Arcís, Carlos; Montiel-Company, José María; Pascual-Moscardó, Agustín; Almerich-Silla, José Manuel

2018-01-01

Provisional restorations represent an important phase during the rehabilitation process, knowledge of the mechanical properties of the available materials allows us to predict their clinical performance. At present, there is no systematic review, which supports the clinicians' criteria, in the selection of a specific material over another for a particular clinical situation. The purpose of this systematic review and meta-analysis was to assess and compare the mechanical properties of dimethacrylates and monomethacrylates used in fabricating direct provisional restorations, in terms of flexural strength, fracture toughness and hardness. This review followed the PRISMA guidelines. The searches were conducted in PubMed, Embase, Web of Science, Scopus, the New York Academy of Medicine Grey Literature Report and were complemented by hand-searching, with no limitation of time or language up to January 10, 2017. Studies that assess and compare the mechanical properties of dimethacrylate- and monomethacrylate-based provisional restoration materials were selected. A quality assessment of full-text articles were performed according to modified ARRIVE and CONSORT criteria and modified Cochrane Collaboration's tool for in vitro studies. Initially, 256 articles were identified. After removing the duplicates and applying the selection criteria, 24 articles were included in the qualitative synthesis and 7 were included in the quantitative synthesis (meta-analysis). It may be concluded that dimethacrylate-based provisional restorations presented better mechanical behavior than monomethacrylate-based ones in terms of flexural strength and hardness. Fracture toughness showed no significant differences. Within the monomethacrylate group, polymethylmethacrylate showed greater flexural strength than polyethylmethacrylate.

Mechanical properties of provisional dental materials: A systematic review and meta-analysis.

Directory of Open Access Journals (Sweden)

Daniela Astudillo-Rubio

Full Text Available Provisional restorations represent an important phase during the rehabilitation process, knowledge of the mechanical properties of the available materials allows us to predict their clinical performance. At present, there is no systematic review, which supports the clinicians' criteria, in the selection of a specific material over another for a particular clinical situation. The purpose of this systematic review and meta-analysis was to assess and compare the mechanical properties of dimethacrylates and monomethacrylates used in fabricating direct provisional restorations, in terms of flexural strength, fracture toughness and hardness. This review followed the PRISMA guidelines. The searches were conducted in PubMed, Embase, Web of Science, Scopus, the New York Academy of Medicine Grey Literature Report and were complemented by hand-searching, with no limitation of time or language up to January 10, 2017. Studies that assess and compare the mechanical properties of dimethacrylate- and monomethacrylate-based provisional restoration materials were selected. A quality assessment of full-text articles were performed according to modified ARRIVE and CONSORT criteria and modified Cochrane Collaboration's tool for in vitro studies. Initially, 256 articles were identified. After removing the duplicates and applying the selection criteria, 24 articles were included in the qualitative synthesis and 7 were included in the quantitative synthesis (meta-analysis. It may be concluded that dimethacrylate-based provisional restorations presented better mechanical behavior than monomethacrylate-based ones in terms of flexural strength and hardness. Fracture toughness showed no significant differences. Within the monomethacrylate group, polymethylmethacrylate showed greater flexural strength than polyethylmethacrylate.

Remediation of the Provisional Storage of Radioactive Waste near Zavratec

International Nuclear Information System (INIS)

Zeleznik, N.; Mele, I.

1998-01-01

In 1996 the remediation of the provisional storage situated near village Zavratec in western part of Slovenia started. In this storage radioactive waste contaminated with radium has been stored for many decades The RAO Agency organized remedial works, in which these activities inventorying and repacking of radioactive waste were carried out. Simultaneously with these activities a detailed programme for covering public relations was prepared and implemented. On the basis of the experimental results and general storage conditions relocation of radioactive waste to the Slovenian central storage was recommended and it is planned to be concluded by the end of 1998. In this paper main remedial activities in the provisional storage of radioactive waste near Zavratec are presented. An important and most challenging part of these activities represent PR activities. (author)

Immediate restoration of single tapered implants with nonoccluding provisional crowns: a 5-year clinical prospective study.

Science.gov (United States)

Lang, Lisa A; Turkyilmaz, Ilser; Edgin, Wendell A; Verrett, Ronald; Garcia, Lily T

2014-04-01

Dental literature has limited number of publications regarding long-term outcome data of immediate restoration of single missing teeth with an implant-supported provisional crown. This 5-year study evaluated hard and soft tissue responses to the immediate placement of single implant-supported provisional crowns. Twenty patients received one dental implant restored immediately with a provisional acrylic resin screw-retained crown. Crestal bone loss was evaluated from standardized periapical radiographs collected at 3-month intervals for the first 21 months followed by a 5-year evaluation. Historical controls acquired from available dental literature were used for comparison. One implant failed within 2 months of surgical placement, presenting with pain and mobility. The remaining implants demonstrated no infection, pain, or radiolucencies. Nineteen implants were clinically immobile, osseointegrated, and asymptomatic at 21 months. At 5 years, one patient died, three patients were noncompliant, and 15 implants were evaluated as functional. Mean bone loss (MBL) at 1 year and 21 months was approximately 0.5 ± 0.5 mm and 0.70 ± 0.26 mm at 5 years. There was no statistically significant difference between MBLs at p provisionalization of single dental implants compares favorably with conventional loading protocols. Long-term data suggest that immediate provisionalization of single dental implants is a viable treatment option. © 2012 Wiley Periodicals, Inc.

Immediate Loading of Implants in the Edentulous Maxilla with a Fixed Provisional Restoration without Bone Augmentation: A Report on 5-Year Outcomes Data Obtained from a Prospective Clinical Trial.

Science.gov (United States)

Toljanic, Joseph A; Ekstrand, Karl; Baer, Russell A; Thor, Andreas

2016-01-01

Successful immediate loading of implants in the edentulous maxilla has been previously reported. The purpose of this 5-year prospective study was to further assess long-term outcomes following immediate loading of implants in the edentulous maxilla with fixed provisional restorations without the use of bone augmentation procedures. Subjects with edentulous maxillary arches each received six implants placed in native bone without augmentation. Where insufficient posterior bone volume existed, angled implant placement was employed. Fixed provisional restorations were delivered within 24 hours of implant placement. Implant placement locations, insertion torque values, and implant dimensions were recorded. Definitive fixed prostheses were placed within 24 weeks following implantation. Baseline implant site marginal bone levels were measured using periapical radiographs. Baseline peri-implant plaque and bleeding scores were obtained. Subjects were examined 6 months after implant placement and then annually for 5 years with follow-up periapical radiographs and plaque/bleeding scores obtained. Fifty-one subjects received a total of 306 implants. Forty subjects with 232 implants returned for the final follow-up appointment representing a 5-year implant survival proportion of 93% with a mean marginal bone loss of 0.44 ± 1.25 mm for this group. Thirty-nine of these 40 subjects continued to function with fixed restorations with the remaining subject functioning with a non-implant-retained removable prosthesis. Within the limitations of this study, predictable long-term implant rehabilitation outcomes were demonstrated for the edentulous maxilla using an immediate loading protocol without bone augmentation.

21 CFR 81.1 - Provisional lists of color additives.

Science.gov (United States)

2010-04-01

... GENERAL SPECIFICATIONS AND GENERAL RESTRICTIONS FOR PROVISIONAL COLOR ADDITIVES FOR USE IN FOODS, DRUGS... not to be construed as a listing for surgical suture use unless color additive petitions have been... the color additive for such use. The color additives listed in paragraphs (a), (b), and (c) of this...

Effect of nightguard vital bleaching gel on the color stability of provisional restorative materials.

Science.gov (United States)

Bajunaid, Salwa Omar

2016-01-01

To assess the hypothesis that there was no difference in effect of 10% and 15% tooth bleaching agents on color stability of materials used for provisional fixed dental prosthesis. Fifteen samples from two materials used for provisional fixed dental prosthesis: methacrylate-based and composite-based materials and 15 preformed polycarbonate crowns soaked in bleaching gel or distilled water. Spectrophotometer recorded color of specimens at baseline, after 3, 7, and 14 days. Data were statistically analyzed using two-factor ANOVA test to compare the color stability of tested materials. Methyl-based provisional material exhibited statistically higher color change when exposed to 10% and 15% bleaching gel (delta EFNx01: 9.0 and 11.1, respectively) as compared to distilled water (delta EFNx01: 2.9). Delta EFNx01 of composite-based material specimens exposed to distilled water was statistically higher (6.3) than specimens exposed to 10% and 15% bleaching gel (1.5 and 1.1, respectively). Polycarbonate crowns showed a statistically lower color change when exposed to 15% (0.9) than to 10% bleaching gel (5.1) or distilled water (5.5). Composite-based provisional material showed highest color stability when exposed to vital tooth bleaching gel, whereas methacrylate-based material was the least color stable. Polycarbonate crowns were more color stable when exposed to 15% bleaching gel as opposed to 10% bleaching gel.

The Provisional Staff Regulations of the Agency

Energy Technology Data Exchange (ETDEWEB)

NONE

1959-06-22

In accordance with Article VII.E of the Statute and of the general principles approved by the General Conference in resolution GC.1(S)/RES/13, the Board of Governors has established 'the terms and conditions on which the Agency's staff shall be appointed, remunerated and dismissed.' The Provisional Staff Regulations thus approved and amended by the Board up to 15 January 1959 are reproduced in this document for the information of all Members of the Agency.

The Provisional Staff Regulations of the Agency

International Nuclear Information System (INIS)

1959-01-01

In accordance with Article VII.E of the Statute and of the general principles approved by the General Conference in resolution GC.1(S)/RES/13, the Board of Governors has established 'the terms and conditions on which the Agency's staff shall be appointed, remunerated and dismissed.' The Provisional Staff Regulations thus approved and amended by the Board up to 15 January 1959 are reproduced in this document for the information of all Members of the Agency

3D printed versus conventionally cured provisional crown and bridge dental materials.

Science.gov (United States)

Tahayeri, Anthony; Morgan, MaryCatherine; Fugolin, Ana P; Bompolaki, Despoina; Athirasala, Avathamsa; Pfeifer, Carmem S; Ferracane, Jack L; Bertassoni, Luiz E

2018-02-01

To optimize the 3D printing of a dental material for provisional crown and bridge restorations using a low-cost stereolithography 3D printer; and compare its mechanical properties against conventionally cured provisional dental materials. Samples were 3D printed (25×2×2mm) using a commercial printable resin (NextDent C&B Vertex Dental) in a FormLabs1+ stereolithography 3D printer. The printing accuracy of printed bars was determined by comparing the width, length and thickness of samples for different printer settings (printing orientation and resin color) versus the set dimensions of CAD designs. The degree of conversion of the resin was measured with FTIR, and both the elastic modulus and peak stress of 3D printed bars was determined using a 3-point being test for different printing layer thicknesses. The results were compared to those for two conventionally cured provisional materials (Integrity ® , Dentsply; and Jet ® , Lang Dental Inc.). Samples printed at 90° orientation and in a white resin color setting was chosen as the most optimal combination of printing parameters, due to the comparatively higher printing accuracy (up to 22% error), reproducibility and material usage. There was no direct correlation between printing layer thickness and elastic modulus or peak stress. 3D printed samples had comparable modulus to Jet ® , but significantly lower than Integrity ® . Peak stress for 3D printed samples was comparable to Integrity ® , and significantly higher than Jet ® . The degree of conversion of 3D printed samples also appeared higher than that of Integrity ® or Jet ® . Our results suggest that a 3D printable provisional restorative material allows for sufficient mechanical properties for intraoral use, despite the limited 3D printing accuracy of the printing system of choice. Copyright © 2017 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

The Provisional Staff Regulations of the Agency

Energy Technology Data Exchange (ETDEWEB)

NONE

1975-11-06

The Provisional Staff Regulations of the Agency, as amended up to 19 September 1975 by the Board of Governors, are set forth in this document for the information of all Members of the Agency. When an individual provision of the Regulations and the Annexes thereto has been amended since their approval by the Board in 1957, this is indicated by a footnote giving the date on which the current text became effective. There is a subject index at the end of the document.

The Provisional Staff Regulations of the Agency

International Nuclear Information System (INIS)

1975-01-01

The Provisional Staff Regulations of the Agency, as amended up to 19 September 1975 by the Board of Governors, are set forth in this document for the information of all Members of the Agency. When an individual provision of the Regulations and the Annexes thereto has been amended since their approval by the Board in 1957, this is indicated by a footnote giving the date on which the current text became effective. There is a subject index at the end of the document

Memoranda by A.P. Uspensky to the Council of Ministers of the Provisional Siberian government

OpenAIRE

Sukhanov Aleksandr

2015-01-01

This publication offers a previously unknown memoranda by representative of the diocesan assembly of deputies of the clergy and laity of the Tomsk diocese A. P. Uspensky, addressed to the Council of Ministers of the Provisional Siberian government in July 1918. A.P. Uspensky solicited for formation of the Ministry of confessions in the Provisional Siberian government. Memoranda are initiative documents to the Statute on the Chief Administration of religious denominations adopted by the Council...

The use of definitive implant abutments for the fabrication of provisional crowns: a case series

OpenAIRE

Bilhan, Hakan; Geckili, Onur; Mumcu, Emre

2011-01-01

Purpose The anterior region is a challenge for most clinicians to achieve optimal esthetics with dental implants. The provisional crown is a key factor in the success of obtaining pink esthetics around restorations with single implants, by soft tissue and inter-proximal papilla shaping. Provisional abutments bring additional costs and make the treatment more expensive. Since one of the aims of the clinician is to reduce costs and find more economic ways to raise patient satisfaction, this pap...

Effect of different provisional cement remnant cleaning procedures including Er:YAG laser on shear bond strength of ceramics.

Science.gov (United States)

Zortuk, Mustafa; Gumus, Hasan Onder; Kilinc, Halil Ibrahim; Tuncdemir, Ali Riza

2012-11-01

The purpose of this study was to evaluate the effect of provisional cement removal by different dentin cleaning protocols (dental explorer, pumice, cleaning bur, Er:YAG laser) on the shear bond strength between ceramic and dentin. In total, 36 caries-free unrestored human third molars were selected as tooth specimens. Provisional restorations were fabricated and cemented with eugenol-free provisional cement. Then, disc-shaped ceramic specimens were fabricated and randomly assigned to four groups of dentin cleaning protocols (n = 9). Group 1 (control): Provisional cements were mechanically removed with a dental explorer. Group 2: The dentin surfaces were treated with a cleaning brush with pumice Group 3: The dentin surfaces were treated with a cleaning bur. Group 4: The provisional cements were removed by an Er:YAG laser. Self-adhesive luting cement was used to bond ceramic discs to dentin surfaces. Shear bond strength (SBS) was measured using a universal testing machine at a 0.05 mm/min crosshead speed. The data were analyzed using a Kolmogorov Smirnov, One-way ANOVA and Tukey HSD tests to perform multiple comparisons (α=0.05). THE DENTIN CLEANING METHODS DID NOT SIGNIFICANTLY AFFECT THE SBS OF CERAMIC DISCS TO DENTIN AS FOLLOWS: dental explorer, pumice, cleaning bur, and Er:YAG laser. The use of different cleaning protocols did not affect the SBS between dentin and ceramic surfaces.

Immediate provisional restoration of a single-tooth implant in the esthetic zone: A case report

Directory of Open Access Journals (Sweden)

Po-Sung Fu

2011-02-01

Full Text Available Immediate implant restoration of single implants may demonstrate a positive effect on peri-implant soft tissue. Placement of a provisional restoration following implant surgery can create soft tissue contours that resemble normal gingival topography before placement of the definitive prosthesis. This article describes a staged approach of the mandibular permanent right central incisor, which was congenital missing. The proper space for restoration of the missing incisor was created through orthodontic treatment. The scheduled implant site was reconstructed using autogenous bone harvested from the chin region. After a healing period of four months, an implant was installed with the connection of a fixed provisional crown to a prefabricated temporary abutment. The soft tissue around the implant healed according to the contours of the provisional restoration and the emergence profile was used to duplicate the definitive restoration. Peri-implant esthetics was achieved through the staged approach and immediate restoration of the implant.

Anterior provisional restorations used to determine form, function, and esthetics for complex restorative situations, using all-ceramic restorative systems.

Science.gov (United States)

Reshad, Mamaly; Cascione, Domenico; Kim, Tae

2010-02-01

A technique is proposed for the restoration of a large and visible maxillary anterior defect. The importance of proper diagnosis, treatment planning, and communication is emphasized. Irreversible treatment should only be rendered once patient approval has been obtained through objective evaluation with provisional restorations. The techniques presented in this article use a combination of ceramic systems currently available to satisfy functional demands while achieving acceptable esthetics. A controlled series of steps, where the provisional restorative components are being replaced by the definitive ones is planned. The only difference between the provisional and definitive restorative components is the material used. The definitive restorations consisted of an implant-supported zirconium oxide framework. Individual pressed porcelain restorations were luted to the framework and a natural tooth. CLINICAL SIGNIFICANCE Provisional restorations allow an objective form of communication. Vertical and horizontal transitional lines can be effectively masked with appropriate treatment planning and a skilled ceramist. Many traditional dental laboratory steps may be eliminated or simplified without compromising the definitive restorations.

Memoranda by A.P. Uspensky to the Council of Ministers of the Provisional Siberian government

Directory of Open Access Journals (Sweden)

Sukhanov Aleksandr

2015-06-01

Full Text Available This publication offers a previously unknown memoranda by representative of the diocesan assembly of deputies of the clergy and laity of the Tomsk diocese A. P. Uspensky, addressed to the Council of Ministers of the Provisional Siberian government in July 1918. A.P. Uspensky solicited for formation of the Ministry of confessions in the Provisional Siberian government. Memoranda are initiative documents to the Statute on the Chief Administration of religious denominations adopted by the Council of Ministers of the Russian government on December 27, 1918.

Comparing Color Change Value of Three Types of Composite Resins in Distilled Water during the First 24 Hours after Exposure to Light

Directory of Open Access Journals (Sweden)

S Afkhami

2016-09-01

Full Text Available BACKGROUND AND OBJECTIVE: Color change of composite resin restorations is one the most common causes for replacing these restorations, which might occur due to internal and external factors. This research was carried out to study and compare color change value of three types of composite resins in distilled water during the first 24 hours after exposure to light. METHODS: In this laboratory research, 120 samples were prepared from three types of composites (Z350, Z250 and Heliomolar and were divided into 3 groups of 40. Samples with 2 mm thickness and 7 mm diameter were prepared. After assessing the initial color by spectrophotometer, samples were exposed to distilled water for 1, 6, 12 and 24 hours, respectively. Then, the final color was assessed by EasyShade device and the color change value (ΔE was calculated for all samples. Moreover, ΔE<3.3 was clinically acceptable. FINDINGS: In 12h group, Heliomolar composite showed lowest color change value compared with two other composites (Z350=1.385, Z250=1.179 and Heliomolar=0.854 (p<0.05, while no significant difference was observed in other groups. Furthermore, lowest color change value in each composite was observed 1 hour after curing (Z350=0.352, Z250=0.641 and Heliomolar=0.298 and color change value increased 24 hours after curing (Z350=1.888, Z250=1.903 and Heliomolar=1.929. CONCLUSION: Results of the study revealed that color change value of all three composites in distilled water was less than 3.3 after 24 hours and it was clinically acceptable

Occupying Iraq: A History of the Coalition Provisional Authority

Science.gov (United States)

2009-01-01

Provisional Authority have pointed guns at CF, including following CF vehicles with their tank tubes .”143 While CPA officials believed that the PKK was a...making loans available to individuals who operate small businesses. In October, CHF International was awarded a $7 million grant for microfinance ...activities in Baghdad Governorate and ACDI/VOCA was given a $5 million grant for microfinance activities in the northern governorates.46 In

Reference materials characterized for impurities in uranium matrices. An overview and re-evaluation of the NBL CRM 124 series

International Nuclear Information System (INIS)

Buerger, S.; Mathew, K.J.; Mason, P.; Narayanan, U.

2009-01-01

The characterized concentrations of 24 impurity elements in New Brunswick Laboratory (NBL) Certified Reference Material (CRM) 124 were reevaluated. A provisional certificate of analysis was issued in September 1983 based upon the 'as prepared' values (gravimetric mixing). The provisional certificate does not state uncertainties for the characterized values, or estimate the degree of homogeneity. Since release of the provisional certificate of analysis various laboratories have reported analytical results for CRM 124. Based upon the reported data a re-evaluation of the characterized values with an estimate of their uncertainties was performed in this work. An assessment of the degree of homogeneity was included. The overall difference between the re-evaluated values for the 24 impurity elements and the 'as prepared' values from the provisional certificate of analysis is negligible compared to the uncertainties. Therefore, NBL will establish the 'as prepared' values as the certified values and use the derived uncertainties from this work for the uncertainties of the certified values. The traceability of the 'as prepared' values was established by the gravimetric mixing procedure employed during the preparation of the CRM. NBL further recommends a minimum sample size of 1 g of the CRM material to ensure homogeneity. Samples should be dried by heating up to 110 deg C for one hour before use. (author)

VSRR - State and National Provisional Counts for Live Births, Deaths, and Infant Deaths

Data.gov (United States)

U.S. Department of Health & Human Services — NOTES: Figures include all revisions received from the states and, therefore, may differ from those previously published. Data are provisional and are subject to...

Immediate placement and provisionalization of maxillary anterior single implant with guided bone regeneration, connective tissue graft, and coronally positioned flap procedures.

Science.gov (United States)

Waki, Tomonori; Kan, Joseph Y K

2016-01-01

Immediate implant placement and provisionalization in the esthetic zone have been documented with success. The benefit of immediate implant placement and provisionalization is the preservation of papillary mucosa. However, in cases with osseous defects presenting on the facial bony plate, immediate implant placement procedures have resulted in facial gingival recession. Subepithelial connective tissue grafts for immediate implant placement and provisionalization procedures have been reported with a good esthetic outcome. Biotype conversion around implants with subepithelial connective tissue grafts have been advocated, and the resulting tissues appear to be more resistant to recession. The dimensions of peri-implant mucosa in a thick biotype were significantly greater than in a thin biotype. Connective tissue graft with coronally positioned flap procedures on natural teeth has also been documented with success. This article describes a technique combining immediate implant placement, provisionalization, guided bone regeneration (GBR), connective tissue graft, and a coronally positioned flap in order to achieve more stable peri-implant tissue in facial osseous defect situations.

20 CFR 404.1592e - How do we determine provisional benefits?

Science.gov (United States)

2010-04-01

... equal to the higher of the benefits payable. (4) If you request reinstatement for more than one benefit..., but are not limited to— (1) If you are a prisoner under § 404.468; (2) If you have been removed... your provisional benefits unless you give us permission. We can recover Medicare premiums you owe from...

DK mini-culotte stenting in the treatment of true coronary bifurcation lesions: a propensity score matching comparison with T-provisional stenting.

Science.gov (United States)

Fan, Lin; Chen, Lianglong; Luo, Yukun; Zhang, Linlin; Zhong, Wenliang; Lin, Chaogui; Chen, Zhaoyang; Peng, Yafei; Zhen, Xingchun; Dong, Xianfeng

2016-03-01

The conventional culotte technique remains not to be widely used for the treatment of coronary bifurcation lesions due to its inherent drawbacks. Here, we developed a double kissing mini-culotte stenting (DK mini-culotte) and assessed its efficacy and safety by a propensity score matching comparison (PSM) with T-provisional stenting. From June 2010 to June 2012, a total of 223 consecutive patients with true coronary bifurcation lesions (TCBLs) were treated with DK mini-culotte (91 patients with 92 lesions) or T-provisional stenting (132 patients with 135 lesions). We performed a PSM to correct the confounders from clinical and lesion's characteristics. The primary endpoint was cumulative major adverse cardiac event (MACE) at 1 year including cardiac death, myocardial infarction, and target vessel revascularization or target lesion revascularization (TVR/TLR). The secondary endpoint was the rate of side branch (SB) restenosis at 12 months. After a PSM, there were 66 patients in each group. Additional SB stenting in the T-provisional group was performed in 10 (15.2 %) lesions. The incidence of 1-year cumulative MACE was 4.55 % for the DK mini-culotte versus 13.6 % for T-provisional stenting (P = 0.127), the rate of TVR/TLR was 1.52 % for DK mini-culotte versus 12.12 % for T-provisional stenting (P = 0.033). The SB binary restenosis rate was 5.6 % in the DK mini-culotte group and 22.4 % in the T-provisional group (P = 0.014). In summary, despite that there is no difference in MACE between groups, DK mini-culotte significantly reduce TVR/TLR and SB restenosis in the treatment of true coronary bifurcation lesions.

A comparative evaluation of the marginal accuracy of crowns fabricated from four commercially available provisional materials: An in vitro study

Science.gov (United States)

Amin, Bhavya Mohandas; Aras, Meena Ajay; Chitre, Vidya

2015-01-01

Purpose: The purpose of this in vitro study was to evaluate and compare the primary marginal accuracy of four commercially available provisional materials (Protemp 4, Luxatemp Star, Visalys Temp and DPI tooth moulding powder and liquid) at 2 time intervals (10 and 30 min). Materials and Methods: A customized stainless steel master model containing two interchangeable dies was used for fabrication of provisional crowns. Forty crowns (n = 10) were fabricated, and each crown was evaluated under a stereomicroscope. Vertical marginal discrepancies were noted and compared at 10 min since the start of mixing and then at 30 min. Observations and Results: Protemp 4 showed the least vertical marginal discrepancy (71.59 μ), followed by Luxatemp Star (91.93 μ) at 10 min. DPI showed a marginal discrepancy of 95.94 μ while Visalys Temp crowns had vertical marginal discrepancy of 106.81 μ. There was a significant difference in the marginal discrepancy values of Protemp 4 and Visalys Temp. At 30 min, there was a significant difference between the marginal discrepancy of Protemp 4 crowns (83.11 μ) and Visalys Temp crowns (128.97 μ) and between Protemp 4 and DPI (118.88 μ). No significant differences were observed between Protemp 4 and Luxatemp Star. Conclusion: The vertical marginal discrepancy of temporary crowns fabricated from the four commercially available provisional materials ranged from 71 to 106 μ immediately after fabrication (at 10 min from the start of mix) to 83–128 μ (30 min from the start of mix). The time elapsed after mixing had a significant influence on the marginal accuracy of the crowns. PMID:26097348

Evaluation of surface physical properties of acrylic resins for provisional prosthesis

Directory of Open Access Journals (Sweden)

Sérgio Paulo Hilgenberg

2008-09-01

Full Text Available Acrylic resins used for provisional prostheses should have satisfactory superficial characteristics in order to ensure gingival health and low bacterial attachment. The purpose of the present study was to evaluate the superficial roughness and contact angle after two types of polishing and the Vickers hardness of three acrylic resins (Duralay - G1, Dencrilay - G2, and Dencor - G3, all shade 66, indicated for provisional fixed prostheses. Five 20 x 3 ± 1 mm diameter discoid specimens were obtained for each group. One side of the specimens was subjected to standard polishing (pumice and whiting slurry, and the opposite side was polished with special tips. The mean roughness and contact angles of the materials were measured. The specimens were subjected to the Vickers microhardness test, which indicated that standard polishing produced a surface roughness equivalent to that of the special tips. The contact angles obtained with the standard polishing were equivalent to those observed in the special tips group. The microhardness of G1 and G3 resins showed statistical differences.

Provisional reporting of polytrauma CT by on-call radiology registrars. Is it Safe?

Energy Technology Data Exchange (ETDEWEB)

Briggs, R.H., E-mail: robbriggs@hotmail.co.u [Department of Radiology, Leeds General Infirmary, Leeds (United Kingdom); Rowbotham, E.; Johnstone, A.L.; Chalmers, A.G. [Department of Radiology, Leeds General Infirmary, Leeds (United Kingdom)

2010-08-15

Aim: To assess the accuracy of provisional reporting and the impact on patient management. Materials and methods: Over a 6 month period, 137 polytrauma computed tomography (CT) examinations were performed by on-call registrar radiologists at our institution. After exclusions, 130 cases were analysed. Discrepancies between registrar and consultant reports were reviewed and classified as either major or minor dependent on potential impact on patient safety. The relationship between seniority of reporting registrar and likelihood of a missed finding was analysed using the Chi-square test. Results: Of the 130 patients, 46 (35%) had a serious injury, 36 (28%) a minor injury, and 48 (38%) no identifiable injury on CT. There were 32 (25%) patients with discrepancies of which 24 (18%) had missed or significantly under-reported findings and eight (6%) overcalled findings. There were six misses classified as major; the remaining 18 were classified as minor. No association was found between the seniority of reporting registrar and the likelihood of a miss (p = 0.96). Conclusion: The incidence of major discrepancies between the provisional and final report was low and did not lead to any significant clinical deterioration. Our study provides a reference of the commonly missed injuries. We conclude that registrar provisional reporting of polytrauma is safe; however, note that a large proportion of examinations are normal and that further work is required to produce robust criteria given the radiation risk to a young population group scanned in trauma.

Provisional reporting of polytrauma CT by on-call radiology registrars. Is it Safe?

International Nuclear Information System (INIS)

Briggs, R.H.; Rowbotham, E.; Johnstone, A.L.; Chalmers, A.G.

2010-01-01

Aim: To assess the accuracy of provisional reporting and the impact on patient management. Materials and methods: Over a 6 month period, 137 polytrauma computed tomography (CT) examinations were performed by on-call registrar radiologists at our institution. After exclusions, 130 cases were analysed. Discrepancies between registrar and consultant reports were reviewed and classified as either major or minor dependent on potential impact on patient safety. The relationship between seniority of reporting registrar and likelihood of a missed finding was analysed using the Chi-square test. Results: Of the 130 patients, 46 (35%) had a serious injury, 36 (28%) a minor injury, and 48 (38%) no identifiable injury on CT. There were 32 (25%) patients with discrepancies of which 24 (18%) had missed or significantly under-reported findings and eight (6%) overcalled findings. There were six misses classified as major; the remaining 18 were classified as minor. No association was found between the seniority of reporting registrar and the likelihood of a miss (p = 0.96). Conclusion: The incidence of major discrepancies between the provisional and final report was low and did not lead to any significant clinical deterioration. Our study provides a reference of the commonly missed injuries. We conclude that registrar provisional reporting of polytrauma is safe; however, note that a large proportion of examinations are normal and that further work is required to produce robust criteria given the radiation risk to a young population group scanned in trauma.

Prospective evaluation of a new protocol for the provisional use of perfusion imaging with exercise stress testing

Energy Technology Data Exchange (ETDEWEB)

Duvall, W.L. [Hartford Hospital, Division of Cardiology (Henry Low Heart Center), Hartford, CT (United States); Mount Sinai Medical Center, Division of Cardiology (Mount Sinai Heart), New York, NY (United States); Savino, John A.; Levine, Elliot J.; Croft, Lori B.; Henzlova, Milena J. [Mount Sinai Medical Center, Division of Cardiology (Mount Sinai Heart), New York, NY (United States); Hermann, Luke K. [Mount Sinai Medical Center, Department of Emergency Medicine, New York, NY (United States)

2014-11-04

Previous literature suggests that myocardial perfusion imaging (MPI) adds little to the prognosis of patients who exercise >10 metabolic equivalents (METs) during stress testing. With this in mind, we prospectively tested a provisional injection protocol in emergency department (ED) patients presenting for the evaluation of chest pain in which a patient would not receive an injection of radioisotope if adequate exercise was achieved without symptoms and a negative ECG response. All patients who presented to the ED over a 5-year period who were referred for stress testing as part of their ED evaluation were included. Patients considered for a provisional protocol were: exercise stress, age <65 years, no known coronary artery disease, and an interpretable rest ECG. Criteria for not injecting included a maximal predicted heart rate ≥85 %, ≥10 METs of exercise, no anginal symptoms during stress, and no ECG changes. Groups were compared based on stress test results, all-cause and cardiac mortality, follow-up cardiac testing, subsequent revascularization, and cost. A total of 965 patients were eligible with 192 undergoing exercise-only and 773 having perfusion imaging. After 41.6 ± 19.6 months of follow-up, all-cause mortality was similar in the exercise-only versus the exercise plus imaging group (2.6 % vs. 2.1 %, p = 0.59). There were no cardiac deaths in the exercise-only group. At 1 year there was no difference in the number of repeat functional stress tests (1.6 % vs. 2.1 %, p = 0.43), fewer angiograms (0 % vs. 4.0 %, p = 0.002), and a significantly lower cost (65 ± 332 vs 506 ± 1,991, p = 0.002; values are in US dollars) in the exercise-only group. The radiation exposure in the exercise plus imaging group was 8.4 ± 2.1 mSv. A provisional injection protocol has a very low mortality, few follow-up diagnostic tests, and lower cost compared to standard imaging protocols. If adopted it would decrease radiation exposure, save time and decrease health-care costs

Prospective evaluation of a new protocol for the provisional use of perfusion imaging with exercise stress testing.

Science.gov (United States)

Duvall, W Lane; Savino, John A; Levine, Elliot J; Hermann, Luke K; Croft, Lori B; Henzlova, Milena J

2015-02-01

Previous literature suggests that myocardial perfusion imaging (MPI) adds little to the prognosis of patients who exercise >10 metabolic equivalents (METs) during stress testing. With this in mind, we prospectively tested a provisional injection protocol in emergency department (ED) patients presenting for the evaluation of chest pain in which a patient would not receive an injection of radioisotope if adequate exercise was achieved without symptoms and a negative ECG response. All patients who presented to the ED over a 5-year period who were referred for stress testing as part of their ED evaluation were included. Patients considered for a provisional protocol were: exercise stress, age heart rate ≥85%, ≥10 METs of exercise, no anginal symptoms during stress, and no ECG changes. Groups were compared based on stress test results, all-cause and cardiac mortality, follow-up cardiac testing, subsequent revascularization, and cost. A total of 965 patients were eligible with 192 undergoing exercise-only and 773 having perfusion imaging. After 41.6 ± 19.6 months of follow-up, all-cause mortality was similar in the exercise-only versus the exercise plus imaging group (2.6% vs. 2.1%, p = 0.59). There were no cardiac deaths in the exercise-only group. At 1 year there was no difference in the number of repeat functional stress tests (1.6% vs. 2.1%, p = 0.43), fewer angiograms (0% vs. 4.0%, p = 0.002), and a significantly lower cost ($65 ± $332 vs $506 ± $1,991, p = 0.002; values are in US dollars) in the exercise-only group. The radiation exposure in the exercise plus imaging group was 8.4 ± 2.1 mSv. A provisional injection protocol has a very low mortality, few follow-up diagnostic tests, and lower cost compared to standard imaging protocols. If adopted it would decrease radiation exposure, save time and decrease health-care costs without jeopardizing prognosis.

Prospective evaluation of a new protocol for the provisional use of perfusion imaging with exercise stress testing

International Nuclear Information System (INIS)

Duvall, W.L.; Savino, John A.; Levine, Elliot J.; Croft, Lori B.; Henzlova, Milena J.; Hermann, Luke K.

2015-01-01

Previous literature suggests that myocardial perfusion imaging (MPI) adds little to the prognosis of patients who exercise >10 metabolic equivalents (METs) during stress testing. With this in mind, we prospectively tested a provisional injection protocol in emergency department (ED) patients presenting for the evaluation of chest pain in which a patient would not receive an injection of radioisotope if adequate exercise was achieved without symptoms and a negative ECG response. All patients who presented to the ED over a 5-year period who were referred for stress testing as part of their ED evaluation were included. Patients considered for a provisional protocol were: exercise stress, age <65 years, no known coronary artery disease, and an interpretable rest ECG. Criteria for not injecting included a maximal predicted heart rate ≥85 %, ≥10 METs of exercise, no anginal symptoms during stress, and no ECG changes. Groups were compared based on stress test results, all-cause and cardiac mortality, follow-up cardiac testing, subsequent revascularization, and cost. A total of 965 patients were eligible with 192 undergoing exercise-only and 773 having perfusion imaging. After 41.6 ± 19.6 months of follow-up, all-cause mortality was similar in the exercise-only versus the exercise plus imaging group (2.6 % vs. 2.1 %, p = 0.59). There were no cardiac deaths in the exercise-only group. At 1 year there was no difference in the number of repeat functional stress tests (1.6 % vs. 2.1 %, p = 0.43), fewer angiograms (0 % vs. 4.0 %, p = 0.002), and a significantly lower cost (65 ± 332 vs 506 ± 1,991, p = 0.002; values are in US dollars) in the exercise-only group. The radiation exposure in the exercise plus imaging group was 8.4 ± 2.1 mSv. A provisional injection protocol has a very low mortality, few follow-up diagnostic tests, and lower cost compared to standard imaging protocols. If adopted it would decrease radiation exposure, save time and decrease health-care costs

77 FR 42702 - Battat Incorporated, Provisional Acceptance of a Settlement Agreement and Order

Science.gov (United States)

2012-07-20

... reports of magnet liberation and two consumer reports of children ingesting non- magnetized steel balls... request, Staff enclosed two in-depth investigation reports of consumer reports describing magnets... CONSUMER PRODUCT SAFETY COMMISSION [CPSC Docket No. 12-C0007] Battat Incorporated, Provisional...

Establishing the pharmaceutical quality of Chinese herbal medicine: a provisional BCS classification.

Science.gov (United States)

Fong, Sophia Y K; Liu, Mary; Wei, Hai; Löbenberg, Raimar; Kanfer, Isadore; Lee, Vincent H L; Amidon, Gordon L; Zuo, Zhong

2013-05-06

The Biopharmaceutical Classification System (BCS), which is a scientific approach to categorize active drug ingredient based on its solubility and intestinal permeability into one of the four classes, has been used to set the pharmaceutical quality standards for drug products in western society. However, it has received little attention in the area of Chinese herbal medicine (CHM). This is likely, in part, due to the presence of multiple active components as well as lack of standardization of CHM. In this report, we apply BCS classification to CHMs provisionally as a basis for establishing improved in vitro quality standards. Based on a top-200 drugs selling list in China, a total of 31 CHM products comprising 50 official active marker compounds (AMCs) were provisionally classified according to BCS. Information on AMC content and doses of these CHM products were retrieved from the Chinese Pharmacopoeia. BCS parameters including solubility and permeability of the AMCs were predicted in silico (ACD/Laboratories). A BCS classification of CHMs according to biopharmaceutical properties of their AMCs is demonstrated to be feasible in the current study and can be used to provide a minimum set of quality standards. Our provisional results showed that 44% of the included AMCs were classified as Class III (high solubility, low permeability), followed by Class II (26%), Class I (18%), and Class IV (12%). A similar trend was observed when CHMs were classified in accordance with the BCS class of AMCs. Most (45%) of the included CHMs were classified as Class III, followed by Class II (16%), Class I (10%), and Class IV (6%); whereas 23% of the CHMs were of mixed class due to the presence of multiple individual AMCs with different BCS classifications. Moreover, about 60% of the AMCs were classified as high-solubility compounds (Class I and Class III), suggesting an important role for an in vitro dissolution test in setting quality control standards ensuring consistent

New Approach To Hour-By-Hour Weather Forecast

Science.gov (United States)

Liao, Q. Q.; Wang, B.

2017-12-01

Fine hourly forecast in single station weather forecast is required in many human production and life application situations. Most previous MOS (Model Output Statistics) which used a linear regression model are hard to solve nonlinear natures of the weather prediction and forecast accuracy has not been sufficient at high temporal resolution. This study is to predict the future meteorological elements including temperature, precipitation, relative humidity and wind speed in a local region over a relatively short period of time at hourly level. By means of hour-to-hour NWP (Numeral Weather Prediction)meteorological field from Forcastio (https://darksky.net/dev/docs/forecast) and real-time instrumental observation including 29 stations in Yunnan and 3 stations in Tianjin of China from June to October 2016, predictions are made of the 24-hour hour-by-hour ahead. This study presents an ensemble approach to combine the information of instrumental observation itself and NWP. Use autoregressive-moving-average (ARMA) model to predict future values of the observation time series. Put newest NWP products into the equations derived from the multiple linear regression MOS technique. Handle residual series of MOS outputs with autoregressive (AR) model for the linear property presented in time series. Due to the complexity of non-linear property of atmospheric flow, support vector machine (SVM) is also introduced . Therefore basic data quality control and cross validation makes it able to optimize the model function parameters , and do 24 hours ahead residual reduction with AR/SVM model. Results show that AR model technique is better than corresponding multi-variant MOS regression method especially at the early 4 hours when the predictor is temperature. MOS-AR combined model which is comparable to MOS-SVM model outperform than MOS. Both of their root mean square error and correlation coefficients for 2 m temperature are reduced to 1.6 degree Celsius and 0.91 respectively. The

21 CFR 81.10 - Termination of provisional listings of color additives.

Science.gov (United States)

2010-04-01

... FOODS, DRUGS, AND COSMETICS § 81.10 Termination of provisional listings of color additives. (a) Ext. D&C... has been observed in all groups fed at the 0.5 percent diet and above. (3) Groups of 4 dogs are being... dogs on the 2 percent dosage level died before 32 weeks; the other is living. Three of the dogs on the...

Effect of water temperature on the fit of provisional crown margins during polymerization: An in vitro study

Directory of Open Access Journals (Sweden)

Vivekanandan Ramkumar

2012-01-01

Full Text Available Aim: To evaluate the effect of water temperature on the marginal fit of bis-acrylic composite provisional crown during resin polymerization. Materials and Methods: Precisely machined 10 brass master dies were designed to simulate molar teeth. Five brass dies were selected and precisely machined to simulate all ceramic crown preparation. An acrylic jaw replica was made in which brass dies were arranged equidistant from each other. A custom-made metallic tray was fabricated on the acrylic jaw replica to make polyvinyl siloxane impression matrix. Bis-acrylic composite resin provisional crowns were made using polyvinyl siloxane impression matrix. Provisional crowns were polymerized at room temperature (Group I direct technique, on dental stone cast; Group I indirect technique crowns and at different water temperatures (Group II direct technique crowns. The vertical marginal gap between all the provisional crown margins and the finish line of brass dies was measured using a Research Stereomicroscope System. Results: The results were statistically analyzed using one-way analysis of variance (ANOVA test and Newman-Keul′s test. The results showed that crowns polymerized in 20°C and 30°C water had marginal gap approximately three times smaller than those polymerized in 30°C air, due to the reduced polymerization shrinkage. Conclusion: This study shows that crowns polymerized in 20°C and 30°C water had mean vertical marginal gap approximately three times smaller than those polymerized in 30°C air. It was approximately closer to that of crowns fabricated by indirect technique. Warmer water also supposedly hastens polymerization.

Effect of water temperature on the fit of provisional crown margins during polymerization: An in vitro study.

Science.gov (United States)

Ramkumar, Vivekanandan; Sangeetha, Arunachalam; Kumar, Vinaya

2012-08-01

To evaluate the effect of water temperature on the marginal fit of bis-acrylic composite provisional crown during resin polymerization. Precisely machined 10 brass master dies were designed to simulate molar teeth. Five brass dies were selected and precisely machined to simulate all ceramic crown preparation. An acrylic jaw replica was made in which brass dies were arranged equidistant from each other. A custom-made metallic tray was fabricated on the acrylic jaw replica to make polyvinyl siloxane impression matrix. Bis-acrylic composite resin provisional crowns were made using polyvinyl siloxane impression matrix. Provisional crowns were polymerized at room temperature (Group I direct technique, on dental stone cast; Group I indirect technique crowns) and at different water temperatures (Group II direct technique crowns). The vertical marginal gap between all the provisional crown margins and the finish line of brass dies was measured using a Research Stereomicroscope System. The results were statistically analyzed using one-way analysis of variance (ANOVA) test and Newman-Keul's test. The results showed that crowns polymerized in 20°C and 30°C water had marginal gap approximately three times smaller than those polymerized in 30°C air, due to the reduced polymerization shrinkage. This study shows that crowns polymerized in 20°C and 30°C water had mean vertical marginal gap approximately three times smaller than those polymerized in 30°C air. It was approximately closer to that of crowns fabricated by indirect technique. Warmer water also supposedly hastens polymerization.

38 CFR 17.65 - Approvals and provisional approvals of community residential care facilities.

Science.gov (United States)

2010-07-01

... approvals of community residential care facilities. 17.65 Section 17.65 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Community Residential Care § 17.65 Approvals and provisional approvals of community residential care facilities. (a) An approval of a facility meeting all of...

The Provisional Staff Regulations of the Agency. Amendment to Regulation 5.04(a)

International Nuclear Information System (INIS)

1973-01-01

On 20 February 1973 the Board of Governors approved the substitution of the figure '1500' for '1000' in the second sentence of Provisional Staff Regulation 5.04(a) as set forth in document INFCIRC/6/Rev.2/Mod.1, thus amending that Regulation to read

Physiologically-based pharmacokinetic model for Fentanyl in support of the development of Provisional Advisory Levels

Energy Technology Data Exchange (ETDEWEB)

Shankaran, Harish, E-mail: harish.shankaran@pnnl.gov [Computational Biology and Bioinformatics Group, Pacific Northwest National Laboratory, Richland, WA 99352 (United States); Adeshina, Femi [National Homeland Security Research Center, United States Environmental Protection Agency, Washington, DC 20460 (United States); Teeguarden, Justin G. [Systems Toxicology Group, Pacific Northwest National Laboratory, Richland, WA 99352 (United States)

2013-12-15

Provisional Advisory Levels (PALs) are tiered exposure limits for toxic chemicals in air and drinking water that are developed to assist in emergency responses. Physiologically-based pharmacokinetic (PBPK) modeling can support this process by enabling extrapolations across doses, and exposure routes, thereby addressing gaps in the available toxicity data. Here, we describe the development of a PBPK model for Fentanyl – a synthetic opioid used clinically for pain management – to support the establishment of PALs. Starting from an existing model for intravenous Fentanyl, we first optimized distribution and clearance parameters using several additional IV datasets. We then calibrated the model using pharmacokinetic data for various formulations, and determined the absorbed fraction, F, and time taken for the absorbed amount to reach 90% of its final value, t90. For aerosolized pulmonary Fentanyl, F = 1 and t90 < 1 min indicating complete and rapid absorption. The F value ranged from 0.35 to 0.74 for oral and various transmucosal routes. Oral Fentanyl was absorbed the slowest (t90 ∼ 300 min); the absorption of intranasal Fentanyl was relatively rapid (t90 ∼ 20–40 min); and the various oral transmucosal routes had intermediate absorption rates (t90 ∼ 160–300 min). Based on these results, for inhalation exposures, we assumed that all of the Fentanyl inhaled from the air during each breath directly, and instantaneously enters the arterial circulation. We present model predictions of Fentanyl blood concentrations in oral and inhalation scenarios relevant for PAL development, and provide an analytical expression that can be used to extrapolate between oral and inhalation routes for the derivation of PALs. - Highlights: • We develop a Fentanyl PBPK model for relating external dose to internal levels. • We calibrate the model to oral and inhalation exposures using > 50 human datasets. • Model predictions are in good agreement with the available

Characterization and human gingival fibroblasts biocompatibility of hydroxyapatite/PMMA nanocomposites for provisional dental implant restoration

Science.gov (United States)

Zhang, Jingchao; Liao, Juan; Mo, Anchun; Li, Yubao; Li, Jidong; Wang, Xuejiang

2008-11-01

The aim of this study was to determine nHA/PMMA composites (H/P) in an optimal ratio with improved cytocompatibility as well as valid physical properties for provisional dental implant restoration. 20 wt.%, 30 wt.%, 40 wt.% and 50 wt.% H/P were developed and characterized using XPS, bending strength test and SEM. Human gingival fibroblasts cultured in extracts or directly on sample discs were investigated by fluorescent staining and MTT assay. Chemical integration in nHA/PMMA interface was indicated by XPS. Typical fusiform cells with adhesion spots were detected on H/P discs. MTT results also indicated higher cell viability in 30 wt.% and 40 wt.% H/P discs ( P provisional fixed crowns (PFC) is 0.4:1.

Flapless postextraction socket implant placement in the esthetic zone: part 1. The effect of bone grafting and/or provisional restoration on facial-palatal ridge dimensional change-a retrospective cohort study.

Science.gov (United States)

Tarnow, Dennis P; Chu, Stephen J; Salama, Maurice A; Stappert, Christian F J; Salama, Henry; Garber, David A; Sarnachiaro, Guido O; Sarnachiaro, Evangelina; Gotta, Sergio Luis; Saito, Hanae

2014-01-01

The dental literature has reported vertical soft tissue changes that can occur with immediate implant placement, bone grafting, and provisional restoration ranging from a gain or loss of 1.0 mm. However, little is known of the effects of facial-palatal collapse of the ridge due to these clinical procedures. Based upon treatment modalities rendered, an ensuing contour change can occur with significant negative esthetic consequences. The results of a retrospective clinical cohort study evaluating the change in horizontal ridge dimension associated with implant placement in anterior postextraction sockets are presented for four treatment groups: (1) group no BGPR = no bone graft and no provisional restoration; (2) group PR = no bone graft, provisional restoration; (3) group BG = bone graft, no provisional restoration; and (4) group BGPR = bone graft, provisional restoration. Bone grafting at the time of implant placement into the gap in combination with a contoured healing abutment or a provisional restoration resulted in the smallest amount of ridge contour change. Therefore, it is recommended to place a bone graft and contoured healing abutment or provisional restoration at the time of flapless postextraction socket implant placement.

The Provisional Staff Regulations of the Agency. Amendments to Annexes II and III

Energy Technology Data Exchange (ETDEWEB)

NONE

1971-08-06

On 8 June 1971 the Board of Governors made amendments to Annexes II and III to the Provisional Staff Regulations which superseded the earlier amendments to those Annexes set forth in document INFCIRC/6/Rev. 2/Mod. 1. Paragraphs 2-4 of that document are accordingly modified.

Provisional Crown Dislodgement during Scuba Diving: A Case of Barotrauma

OpenAIRE

Gulve, Meenal Nitin; Gulve, Nitin Dilip

2013-01-01

Changes in ambient pressure, for example, during flying, diving, or hyperbaric oxygen therapy, can lead to barotrauma. Although it may seem that this issue was neglected in dental education and research in recent decades, familiarity with and understanding of these facts may be of importance for dental practitioners. We report the case of a patient who experienced barotrauma involving dislodgement of a provisional crown during scuba diving. Patients who are exposed to pressure changes as a pa...

Work Hours, Social Value of Leisure and Globalisation

OpenAIRE

Hansen, Jørgen Drud; Molana, Hassan; Montagna, Catia; Ulff-Møller Nielsen, Jørgen

2010-01-01

We examine how openness interacts with the coordination of consumption-leisure decisions in determining the equilibrium working hours and wage rate when there are leisure externalities (e.g., due to social interactions). The latter are modelled by allowing a worker's marginal utility of leisure to be increasing in the leisure time taken by other workers. Coordination takes the form of internalising the leisure externality and other relevant constraints (e.g., labour demand). The extent of ope...

Effect of Immersion Time in Artificial Saliva on Flexural Strength of Provisional Crown and Bridge Material: Light zPolymerization versus Autopolymerization system

Directory of Open Access Journals (Sweden)

Marzia Magdalena Tetelepta

2013-07-01

Full Text Available Objective: The aim of this study was to investigate the effect of immersion time in artificial salive on the flexural strength of provisional crown and bridge (p-c&b materials. Materials and Methods: Two types of p-c&b materials were used in this study: Light polymerized p-c&b material (Revotek LC and autopolymerized p-c&b material (PerfecTemp II. A total of 100 specimens were fabricated and measured according to ISO 4049/2000. A stainless steel mould was used to prepare 2mmx2mmx25mm bar shaped specimens. All materials were dispensed and manipulated according to the manufacturers' instructions. The specimens were divided into 5 groups (n=10. Each specimen of the first group was measured immediately after preparation. The second, third, fourth and fifth groups were immersed in artificial saliva at 37ºC in an incubator for 1 hour, 1 day, 7 days, and 14 days, respectively. Flexural strength was tested by Universal Mechanical Testing Machine Shimadzu in a 3-point bending test. The repeated ANOVA and Post-Hoc Bonferroni test were used to compare the continuous variables between the groups. Results: The results showed flexural strength of Revotek LC were higher than PerfecTemp II at first and second group. However, flexural strength of PerfecTemp II was higher than Revotek LC at third, fourth, and fifth group. The highest flexural strength of Revotek LC was achieved in 1 hour immersion, whereas PerfecTemp II achieved the highest value in 7 days. Conclusion: Flexural strength of p-c&b materials were influenced by immersion time in artifical saliva and the type of p-c&b materials.DOI: 10.14693/jdi.v17i1.108

Antonio Maceo: Agent General of the Provisional Revolutionary Government to the Cuban emigration (I

Directory of Open Access Journals (Sweden)

José Antonio Navarro Álvarez

2009-03-01

Full Text Available This article describes the role of paramount importance played by Antonio Maceo y Grajales as General Agent of the Provisional Government, one of the less studied and known roles of this preeminent patriot of our wars of independence.

Normal values of iodine - 131 uptake in 24 hours, in Rio Grande do Norte, Brazil

International Nuclear Information System (INIS)

Oliveira Filho, T.F. de; Oliveira, C.F.F. de

Thorough clinical exams on all patients come to the radioisotope Laboratory at UFRN, where carried out attempting to select those patients with thyroids considered to be clinically normal. After wayne tests for hypo and hyperthyroidism were carried out, 100 patients were considered to be fit for the research. All of them had an impalpable and asympitomatic thyroid. Waynes clinical indices were precisely revealed in 93% of cases. It was concluded that the normal values of uptake of 131 I during the 24 hours in RGN varied between 14% and 44% [pt

Redesign of a fixture mount to be used as an impression coping and a provisional abutment as well

Directory of Open Access Journals (Sweden)

Glenn Hsuan-Chen Chang

2011-01-01

Full Text Available Purpose: An integrated fixture mount/impression coping/ temporary abutment can provide many advantages for immediate loading of dental implants, such as simpler procedure, less chair time, cost reduction, and comfort for the patients. Materials and Methods: A newly designed dental implant fixture mount (DIFMA can be used as an impression coping for taking an immediate impression. An immediate load provisional prosthesis can then be fabricated shortly after implant placement to immediately load the implants. This fixture mount can also serve as a temporary abutment for immediate chair-side fabrication of provisional prosthesis. Two clinical cases are presented. Results: A clinical case utilizing the fixture mount abutment (DIFMA/implant assembly is presented. The precision of fitting between the impression copings and implants is secured with this system. The chair time for taking an immediate impression is greatly reduced. Less cost for the restoration is provided and patient comfort is delivered. Conclusions: More patient satisfaction can be conferred by employing the fixture mount in the process of immediate impression taking and as an immediate provisional abutment.

Effect of nightguard vital bleaching gel on the color stability of provisional restorative materials

Directory of Open Access Journals (Sweden)

Salwa Omar Bajunaid

2016-01-01

Conclusions: Composite-based provisional material showed highest color stability when exposed to vital tooth bleaching gel, whereas methacrylate-based material was the least color stable. Polycarbonate crowns were more color stable when exposed to 15% bleaching gel as opposed to 10% bleaching gel.

Effect of eliminating administrative radiographs on patient exposure and accuracy of provisional treatment plans

International Nuclear Information System (INIS)

Kantor, M.L.; Slome, B.A.

1987-01-01

Published reports and recommendations suggest that radiographs are often ordered because of administrative policies during the screening and selection of patients for dental school clinics. This study examined the prescription of radiographs for two groups of patients: those who were radiographically examined according to an administrative policy and those whose radiographic needs were determined by a clinical examination. The provisional treatment needs assessment based on the screening examination was compared to the final treatment plan based on a complete diagnostic workup for both groups of patients to assess the effect of a change in school policy. Clinicians ordered half the number of panoramic radiographs as would have been ordered by administrative policy. There was no significant difference in the agreement between the provisional and final treatment plans under the two policies. These results suggest that dental schools can comply with federal recommendations against administrative radiographs without compromising patient selection

Normal Hg uptake values in children under 4 years old

International Nuclear Information System (INIS)

Raynaud, C.

1976-01-01

At birth the child's kidney is anatomically and functionally immature and the Hg uptake rate is only a quarter that of an adult. At 12 months this value is already 3/4 that of the adult and the final normal mature values are reached between 3 and 4 years. A curve of normal values for children below 4 years old is proposed, though being based on a small number of measurements only it must be taken as provisional [fr

Pre-occupation of innocence and provisional penal enforcement: a critical analysis of the Federal Supreme Court jurisprudential modification

Directory of Open Access Journals (Sweden)

Augusto Jobim do Amaral

2017-10-01

Full Text Available This article deals with the problems involved in the provisional execution of the sentence in the Brazilian criminal procedural system, especially with respect to the constitutional guarantee of the presumption of innocence, here in its political-constitutional value. In the current national context in which it is heavily invested in relativizations of fundamental guarantees and in false punitive solutions, it is essential that the criminal procedure be imposed from the principles enshrined in the 1988 Constitution. It intends to demonstrate the new contours of the position built by the Federal Supreme Court on the subject, its possible criticisms and impacts on the commitment of the legitimacy of the decisions made in criminal matters by the Judiciary.

Comparative Evaluation of Marginal Discrepancy in Tooth Colored Self Cure Acrylic Provisional Restorations With and Without Reinforcement of Glass Beads: An In-Vitro Study.

Science.gov (United States)

Yasangi, Manoj Kumar; Mannem, Dhanalakshmi; Bommireddy, Vikram Simha; Neturi, Sirisha; Ravoori, Srinivas; Jyothi

2015-05-01

This invitro study was conducted to compare and evaluate marginal discrepancy in two types of tooth colored self cure provisional restorative materials {DPI&UNIFAST TRAD} before and after reinforcement of glass beads. The aim of the present study was to evaluate and compare marginal discrepancy in two types of provisional restorative materials (DPI and UNI FAST TRAD) before and after reinforcement with Glass beads. Tooth shaped resin copings were fabricated on custom made brass metal die. A total of 60 resin copings were fabricated in which 30 samples were prepared with DPI and 30 samples with UNIFAST material. Each group of 30 samples were divided in to two sub groups in which 15 samples were prepared with glass bead reinforcement and 15 samples without reinforcement. The marginal discrepancy was evaluated with photomicroscope {Reichet Polyvar 2 met} by placing the resin copings on custom made brass resin coping holder. Measurements obtained were statistically analysed by unpaired t-test to know any significance between two variables. Unreinforced DPI specimens had shown lower marginal discrepancy (442.82) than reinforced specimens (585.77). Unreinforced UNIFAST specimens have shown high values of marginal discrepancy (592.83) than reinforced specimens (436.35). p-value between reinforced and unreinforced specimens of DPI (p=0.0013) and UNIFAST (p= 0.0038) has shown statistical significance. This in-vitro study revealed that unreinforced DPI specimens have shown lower marginal discrepancy than reinforced specimens and unreinforced UNIFAST specimens have shown higher values of marginal discrepancy than reinforced specimens.

Comparative Evaluation of Marginal Discrepancy in Tooth Colored Self Cure Acrylic Provisional Restorations With and Without Reinforcement of Glass Beads: An In-Vitro Study

Science.gov (United States)

Yasangi, Manoj Kumar; Mannem, Dhanalakshmi; Neturi, Sirisha; Ravoori, Srinivas; Jyothi

2015-01-01

Context This invitro study was conducted to compare and evaluate marginal discrepancy in two types of tooth colored self cure provisional restorative materials {DPI&UNIFAST TRAD} before and after reinforcement of glass beads. Aim The aim of the present study was to evaluate and compare marginal discrepancy in two types of provisional restorative materials (DPI and UNI FAST TRAD) before and after reinforcement with Glass beads. Materials and Methods Tooth shaped resin copings were fabricated on custom made brass metal die. A total of 60 resin copings were fabricated in which 30 samples were prepared with DPI and 30 samples with UNIFAST material. Each group of 30 samples were divided in to two sub groups in which 15 samples were prepared with glass bead reinforcement and 15 samples without reinforcement. The marginal discrepancy was evaluated with photomicroscope {Reichet Polyvar 2 met} by placing the resin copings on custom made brass resin coping holder. Results Measurements obtained were statistically analysed by unpaired t-test to know any significance between two variables. Unreinforced DPI specimens had shown lower marginal discrepancy (442.82) than reinforced specimens (585.77). Unreinforced UNIFAST specimens have shown high values of marginal discrepancy (592.83) than reinforced specimens (436.35). p-value between reinforced and unreinforced specimens of DPI (p=0.0013) and UNIFAST (p= 0.0038) has shown statistical significance. Conclusion This in-vitro study revealed that unreinforced DPI specimens have shown lower marginal discrepancy than reinforced specimens and unreinforced UNIFAST specimens have shown higher values of marginal discrepancy than reinforced specimens. PMID:26155574

Development of a provisional essential medicines list for children in Canada: consensus process.

Science.gov (United States)

Woods, Hannah; Oronsaye, Efosa; Bali, Anjli; Rajakulasingam, Yathavan; Lee, Taehoon; Umali, Norman; Cohen, Eyal; Finkelstein, Yaron; Offringa, Martin; Persaud, Nav

2018-03-26

Worldwide, many countries have developed a list of essential medicines for children to improve prescribing. We aimed to create an essential medicines list for children in Canada. We adapted the previously created preliminary list of essential medicines for adults in Canada and the WHO Model List of Essential Medicines for Children to create a provisional list of essential medicines for children in Canada. Canadian clinicians made suggestions for changes. Literature relevant to each suggestion was presented to clinician-scientists, who used a modified nominal group technique to make recommendations on the suggestions. Ontario Public Drug Programs prescription data were reviewed to identify commonly prescribed medications missing from the list. Literature relevant to these medications was shared with a clinician-scientist review panel to determine which should be added, and a revised list was developed. A total of 76 items were removed from the list of essential medicines for adults in Canada because they were not indicated for use in children or were not relevant in the Canadian health care context; 7 medications were added to the child list based on Ontario Public Drugs Programs prescribing data and clinician-scientist review. Suggestions to add, remove or substitute medications were made by peer-reviewers and resulted in removal of 1 medication and replacement of 1 medication. The process produced a provisional list of 67 essential medications for children. A provisional list of 67 essential medicines for children was created through a peer-reviewed, multistep process based on current clinical evidence, Canadian clinical practice guidelines and historical prescribing data. It is publicly posted at http://cleanmeds.ca/. The list should be further developed based on wider input and should be continuously revised based on emerging evidence of the safety and effectiveness of these medicines in all pediatric age groups. Copyright 2018, Joule Inc. or its licensors.

76 FR 6453 - Raynor Marketing, Ltd., Provisional Acceptance of a Settlement Agreement and Order

Science.gov (United States)

2011-02-04

... CONSUMER PRODUCT SAFETY COMMISSION [CPSC Docket No. 11-C0003] Raynor Marketing, Ltd., Provisional..., Raynor Marketing, Ltd. and the staff (``Staff'') of the United States Consumer Product Safety Commission... Street, Suite 205, McLean, VA 22101. Counsel for Raynor Marketing, Ltd. U.S. Consumer Product Safety...

Radiation safety of crew and passengers of air transportation in civil aviation. Provisional standards

Science.gov (United States)

Aksenov, A. F.; Burnazyan, A. I.

1985-01-01

The purpose and application of the provisional standards for radiation safety of crew and passengers in civil aviation are given. The radiation effect of cosmic radiation in flight on civil aviation air transport is described. Standard levels of radiation and conditions of radiation safety are discussed.

Preparation and provisional certification of NBL Spectrographic Impurity Standards, CRM 123 (1-7) and 124 (1-7)

International Nuclear Information System (INIS)

Santoliquido, P.M.

1983-09-01

This report describes the design, production, and provisional certification of two new certified reference materials (CRMs): CRM No. 123 (1-7), U 3 O 8 containing 18 trace elements, and CRM No. 124 (1-7), U 3 O 8 containing 24 trace elements. The elements to be included and concentrations to be used were decided on the basis of information gathered from users of a previous CRM of this type, CRM No. 98 (1-7). The new CRMs were prepared by the addition of trace elements to high purity U 3 O 8 . Provisional certification was accomplished by an interlaboratory program in which four different laboratories analyzed the materials by carrier distillation dc arc emission spectrography

Immediate implant placement and provisionalization with simultaneous guided bone regeneration in the esthetic zone

Directory of Open Access Journals (Sweden)

Chih-Long Chen

2011-03-01

Full Text Available The procedure for immediate implant placement and provisionalization is time-saving, possibly with only one surgical intervention required, although allowing maximal preservation of peri-implant tissues. In this case, we extracted a fractured maxillary right central incisor of a 46-year-old woman with high esthetic expectations, and a transmucosal implant was immediately installed. Simultaneous guided bone regeneration was performed to correct the defects at the facial side of the socket and augment the alveolar ridge horizontally. Primary stability of the implant body and wound closure without tension were confirmed. Connection of a 15° angled abutment and fabrication of a provisional acrylic resin crown without occlusal contact were also completed in the same appointment. After intensive follow-up and soft-tissue molding for 6 months, the customized zirconia abutment and all-ceramic crown were definitively fabricated. During the 18-month follow-up period, the patient was satisfied with the esthetic and functional results.

Valuation of provisional and cultural services of a Ramsar site: A preliminary study on Rudrasagar lake, India

Directory of Open Access Journals (Sweden)

Moitree Taran

2017-01-01

Full Text Available Rudrasagar lake, a Ramsar site in India offers a variety of ecosystem services. The contribution of Rudrasagar lake to the society has not been estimated so far. The preliminary study aims to provide an economic valuation of the provisional and cultural services of the Rudrasagar lake. Official records of revenue collected by the Tourism Department of Tripura and a socio- economic survey was the source of information used in the economic valuation of the lake. The main provisional services provided by the lake are food (aquatic plants and fishes, fuel wood and timber whereas, the cultural services provided were boat raiding and tourism due to its historical importance. The provisioning and cultural services provided by the Rudrasagar lake are 40810 US$ and 33929.33 US$ per year respectively during the period of 2010-2015. The main threats to the wetland identified are increasing silt loads due to deforestation, expansion of agricultural land and land conversion due to population pressure. To alleviate the anthropogenic stress on the lake, better monitoring, planning and management are essential. By proper conservation and management it will be possible to enjoy the provisional and cultural services of the lake in a sustainable way.

Fracture Strength and Failure Mode of Maxillary Implant-Supported Provisional Single Crowns : A Comparison of Composite Resin Crowns Fabricated Directly Over PEEK Abutments and Solid Titanium Abutments

NARCIS (Netherlands)

Santing, H.J.; Meijer, Henny J.A.; Raghoebar, G.M.; Ozcan, M.

2012-01-01

Background: Polyetheretherketone (PEEK) temporary abutments have been recently introduced for making implant-supported provisional single crowns. Little information is available in the dental literature on the durability of provisional implant-supported restorations. Purpose: The objectives of this

75 FR 1356 - RC2 Corporation, Provisional Acceptance of a Settlement Agreement and Order

Science.gov (United States)

2010-01-11

... primarily at toy stores and various retailers nationwide, and secondarily through RC2's e-commerce websites... various retailers nationwide, and secondarily through RC2's e-commerce Web sites or as `sub-components' of...(e). Published below is a provisionally-accepted Settlement Agreement with RC2 Corporation...

Immediate Implant Placement and Provisionalization Using the Patient's Extracted Crown: 12-Month Follow-Up.

Science.gov (United States)

Deliberador, Tatiana Miranda; Begnini, Gilmar José; Tomazinho, Flávia; Rezende, Carlos Eduardo Edwards; Florez, Fernando Luis Esteban; Leonardi, Denise Piotto

2018-03-01

Immediate placement and provisionalization of implants in fresh sockets has been previously demonstrated to be a predictable treatment in the restoration of non-recoverable teeth in the anterior regions of the maxilla. This article reports a clinical case in which an immediate implant placement protocol was used in combination with two distinct and sequential grafts (bovine bone and connective tissue, respectively) followed by immediate implant provisionalization using the patient's crown of an extracted tooth. Physical, clinical, and image examinations of the patient (female, 23 years old) revealed a maxillary central incisor (tooth No. 8) with slight mobility due the presence of extensive cervical resorption. The treatment proposed was the atraumatic extraction of the tooth followed by immediate implant placement and provisionalization. Two grafts (bovine bone and connective tissue) were used due to the presence of a very thin maxillary bone plate associated with a thin gingival biotype. The use of the extracted crown as a temporary crown after immediate implant placement resulted in immediate attainment of an esthetically pleasing outcome and long-term favorable results. The treatment protocol proposed can be efficiently used to immediately restore the patient's esthetics and function while maintaining the health, volume, and contours of gingival tissues over a 12-month follow-up period. Anterior teeth extractions typically require the execution of single-unit prostheses using dental materials of synthetic origin (such as polymers), which often are incapable of achieving the esthetic and physiological results patients expect. The use of the patient's own crown was demonstrated, which allowed good clinical results to be achieved and the natural shape and function of tissues to be maintained.

76 FR 61042 - Modification of Regulations Regarding the Practice of Accepting Bonds During the Provisional...

Science.gov (United States)

2011-10-03

... Department of Commerce (the Department) is amending its regulations governing the effect of an affirmative... that explains the effects of an affirmative preliminary determination). This amendment reflects the... no hierarchy between cash and bond requirements for provisional measures, and that allowing the...

76 FR 58784 - Bad Boy Enterprises, LLC, Provisional Acceptance of a Settlement Agreement and Order

Science.gov (United States)

2011-09-22

... CONSUMER PRODUCT SAFETY COMMISSION [CPSC Docket No. 11-C0011] Bad Boy Enterprises, LLC... 1118.20(e). Published below is a provisionally-accepted Settlement Agreement with Bad Boy Enterprises..., Bad Boy Enterprises, LLC (``Bad Boy'') and staff (``Staff'') of the United States Consumer Product...

Immediate implant placement and provisional crown fabrication after a minimally invasive extraction of a peg-shaped maxillary lateral incisor: a clinical report.

Science.gov (United States)

Turkyilmaz, Ilser; Suarez, Jose Carlos; Company, Andrea M

2009-09-01

The aim of this case report is to describe the replacement of a maxillary peg-shaped lateral incisor with the placement of an immediate implant and a provisional restoration following a minimally invasive extraction to preserve anterior esthetics. Extraction sites in the anterior maxilla can present restorative challenges with regard to esthetics. Resistance to wearing a temporary removable partial denture during healing makes immediate implant therapy an appealing alternative to patients. Implant placement into fresh extraction sockets using no flap elevation has recently become more popular due to some advantages including less bleeding, swelling, and the preservation of existing soft tissue contours. A 20-year-old woman with a peg-shaped maxillary left lateral incisor was treated using an implant placed into the fresh extraction socket using a flapless approach and immediate provisional crown fabrication. Flapless implant placement helps to preserve site morphology by protecting and supporting existing hard and soft tissues while minimizing surgical trauma to the adjacent tissues. Using a previously fabricated acrylic index, a provisional acrylic crown was fabricated on the adjusted temporary abutment and delivered to the patient the same day during the extraction visit. This report describes the diagnosis and treatment of an over-prepared peg-shaped maxillary left lateral incisor associated with multiple crown decementations. The tooth was extracted without flap elevation and an implant was inserted immediately using flapless surgery and placement of an immediate provisional single crown. Flapless implant insertion into fresh extraction sockets and placement of immediate provisional crowns in cases involving the maxillary anterior region represent a viable treatment option in appropriate clinical situations where esthetics are a high priority. The strategy preserves optimum gingival contours and papillary height may be a viable option compared to fixed partial

76 FR 23225 - Modification of Regulations Regarding the Practice of Accepting Bonds During the Provisional...

Science.gov (United States)

2011-04-26

... online at http://www.Regulations.gov and on the Department's Web site at http://www.trade.gov/ia/ . Any questions concerning file formatting, document conversion, access on the Internet, or other electronic... system, for the provisional measure period an estimated antidumping or countervailing duty rate is...

Agitation in cognitive disorders:International Psychogeriatric Association provisional consensus clinical and research definition

OpenAIRE

Cummings, Jeffrey; Mintzer, Jacobo; Brodaty, Henry; Sano, Mary; Banerjee, Sube; Devanand, D. P.; Gauthier, Serge; Howard, Robert; Lanctôt, Krista; Lyketsos, Constantine G.; Peskind, Elaine; Porsteinsson, Anton P.; Reich, Edgardo; Sampaio, Cristina; Steffens, David

2015-01-01

Background: Agitation is common across neuropsychiatric disorders and contributes to disability, institutionalization, and diminished quality of life for patients and their caregivers. There is no consensus definition of agitation and no widespread agreement on what elements should be included in the syndrome. The International Psychogeriatric Association formed an Agitation Definition Work Group (ADWG) to develop a provisional consensus definition of agitation in patients with cognitive diso...

Effect of different polishing methods on surface roughness of provisional prosthetic materials.

Science.gov (United States)

Tupinambá, Ívian Verena Maia; Giampá, Priscila Couy Corrêa; Rocha, Isadora Almeida Rios; Lima, Emilena Maria Castor Xisto

2018-01-01

To evaluate the surface roughness of bis-acrylic and acrylic resins submitted to different methods of polishing. Fifty samples of each provisional restorative material (Structur 2, Protemp 4, Duralay, and Dencrilay) were fabricated (10 mm × 2 mm) and divided into five groups ( n = 10): (1) positive control group - polyester strip; (2) negative control - unpolished; (3) abrasive tips (Exa-Technique-Edenta); (4) goat hair brush and diamond polishing paste; and (5) silicone tips (Enhance). Each material was mixed and polymerized according to manufacturer's instructions. The parameter evaluated was the arithmetic mean of the surface roughness (Ra) determined using the rugosimeter SJ 301 (Mitutoyo, Japan). The data were analyzed with two-way analysis of variance ( post hoc Tukey's test) ( P < 0.05). The lowest surface roughness values (0,22-0,90 μm) were observed in the Group 4 - goat hair brush and diamond paste, while the highest values (1,17-1,44 μm) were found in the Group 5 - silicone tips (enhance), with statistically significant differences between them, except for Dencrilay acrylic resin. There was statistically significant difference between bis-acrylic and acrylic resins in the Groups 1, 2, and 4. Within the limitations of this study, it was concluded that the most effective polishing system was the goat hair brush with diamond paste for both bis-acrylic and acrylic resins. The bis-acrylic resins exhibited significantly smoother surfaces than the acrylic resins.

The Paediatric Rheumatology International Trials Organisation provisional criteria for the evaluation of response to therapy in juvenile dermatomyositis

DEFF Research Database (Denmark)

Ruperto, Nicolino; Pistorio, Angela; Ravelli, Angelo

2010-01-01

To develop a provisional definition for the evaluation of response to therapy in juvenile dermatomyositis (DM) based on the Paediatric Rheumatology International Trials Organisation juvenile DM core set of variables....

Month-hour distributions of zenith luminance and diffuse illuminance in Madrid

International Nuclear Information System (INIS)

Soler, Alfonso; Gopinathan, Kannam K.; Robledo, Luis; Ruiz, Enrique

2004-01-01

Month-hour equal mean zenith luminance contours are obtained from one year of data of zenith luminance measurements for cloudless, overcast and partly cloudy skies and also when the combined data for all sky types are considered. For many hours in different months, the overcast sky luminance values are roughly about three times the cloudless sky luminance values and one and a half times the partly cloudy sky values. The dependence of month-hour equal mean zenith luminance contours on the ratio of global to extraterrestrial illuminance on a horizontal surface is also given. From equal mean zenith luminance contours, the approximate values of the mean zenith luminance for different sky conditions and different hours and months of the year can be easily obtained. Month-hour equal mean diffuse illuminance contours are obtained from diffuse illuminance measurements performed during the period 1992-1998. The dependence on solar altitude of the monthly average hourly values of diffuse illuminance is given and compared to the corresponding one obtained from data for Bet Dagan (Israel)

Fracture strength and failure mode of maxillary implant-supported provisional single crowns: a comparison of composite resin crowns fabricated directly over PEEK abutments and solid titanium abutments.

Science.gov (United States)

Santing, Hendrik Jacob; Meijer, Henny J A; Raghoebar, Gerry M; Özcan, Mutlu

2012-12-01

Polyetheretherketone (PEEK) temporary abutments have been recently introduced for making implant-supported provisional single crowns. Little information is available in the dental literature on the durability of provisional implant-supported restorations. The objectives of this study were to evaluate the fracture strength of implant-supported composite resin crowns on PEEK and solid titanium temporary abutments, and to analyze the failure types. Three types of provisional abutments, RN synOcta Temporary Meso Abutment (PEEK; Straumann), RN synOcta Titanium Post for Temporary Restorations (Straumann), and Temporary Abutment Engaging NobRplRP (Nobel Biocare) were used, and provisional screw-retained crowns using composite resin (Solidex) were fabricated for four different locations in the maxilla. The specimens were tested in a universal testing machine at a crosshead speed of 1 mm/minute until fracture occurred. The failure types were analyzed and further categorized as irreparable (Type 1) or reparable (Type 2). No significant difference was found between different abutment types. Only for the position of the maxillary central incisor, composite resin crowns on PEEK temporary abutments showed significantly lower (p Provisional crowns on PEEK abutments showed similar fracture strength as titanium temporary abutments except for central incisors. Maxillary right central incisor composite resin crowns on PEEK temporary abutments fractured below the mean anterior masticatory loading forces reported to be approximately 206 N. © 2010 Wiley Periodicals, Inc.

78 FR 36571 - North American Datum of 1983 (NAD 83) Outer Continental Shelf (OCS) Provisional Official...

Science.gov (United States)

2013-06-18

... DEPARTMENT OF THE INTERIOR Bureau of Ocean Energy Management [MMAA104000] North American Datum of 1983 (NAD 83) Outer Continental Shelf (OCS) Provisional Official Protraction Diagram (OPDs) AGENCY... OPDs. SUMMARY: Notice is hereby given that effective with this publication two NAD 83-based OCS...

The success rate of narrow body implants used for supporting immediate provisional restorations: a pilot feasibility study.

Science.gov (United States)

Wang, Hom-Lay; Okayasu, Kozue; Fu, Jia-Hui; Hamerink, Howard A; Layher, Mary G; Rudek, Ivan Elimar

2012-12-01

Implants were first designed to be used in the reconstruction of edentulous mandibles. However, with the technological advancement, enormous changes were made to improve the implant design and surface characteristics leading to the wide use of implants in the replacement of missing teeth. During the transition from an edentulous span to a fixed prosthesis, narrow body implants (NBIs) have been proposed to enhance patient comfort and function. Therefore, this study was aimed at investigating the survival and success rates of NBIs used for supporting immediately nonfunctional loaded provisional fixed partial denture (PFPD). Either 2.2- or 2.4-mm-diameter dental implants were placed transmucosally into the edentulous ridges of 10 partially edentulous patients. PFPD of self-cured bis-acryl composite material were made using either a vacuform template chairside or a relined prefabricated PFPD. Occlusal adjustments were made to ensure that there was no functional loading on the provisional restorations before they were secured onto the transitional implants. At 1 year, the implant success and survival rates were 38.7% and 93.5%, respectively, with a mean percentage of bone loss of 9.46% (0%-40%) and a mean bone loss of 1.19 mm (range: 0-3.5 mm). With a favorable implant survival rate, the use of NBIs to support provisional restorations seemed to be a feasible treatment option. In addition, there is merit for research on the long-term use of NBIs-supported final prostheses.

Clinical performance of provisional screw-retained metal-free acrylic restorations in an immediate loading implant protocol: a 242 consecutive patients' report.

Science.gov (United States)

Suarez-Feito, Jose-María; Sicilia, Alberto; Angulo, Jorge; Banerji, Subir; Cuesta, Isabel; Millar, Brian

2010-12-01

To evaluate the clinical performance of provisional screw-retained metal-free acrylic restorations in an immediate loading implant protocol. Two hundred and forty-two consecutive patients were selected retrospectively, who received 1011 implants and 311 immediate provisional screw-retained implant restorations (2-4 h after implant surgery). The patients were monitored for a period of 2-3 months, until they were referred for a final restoration. The primary variables recorded include the survival time and the appearance of fractures in the provisional restoration, and the independent variables included age, sex, dental arch, type of restoration, type of attachment and components used, as well as cantilevers and opposing dentition. A survival analysis (Kaplan-Meier) and a Cox regression analysis were performed. Twenty-three restorations in 20 patients (8.26%, 95% CI 4.8-11.7) showed at least one fracture (7.39%). More than half of the new fractures (52%, 12 cases) occurred in the first 4 weeks. The cumulative survival probability observed was greater in mandible (P=0.05) and non-cantilever restorations (P=0.001), and in those opposed by full restorations or natural teeth (P=0.001). With an opposing implant-supported prosthesis, the risk of fracture was multiplied by 4.7, and the use of cantilevers as well as the location of the restoration in the maxilla multiply the risk by 3.4-3.5. Immediate provisional screw-retained metal-free implant-supported restorations can be considered a reliable restoration (92.6% remain intact) for the healing period of 3 months. © 2010 John Wiley & Sons A/S.

The Paediatric Rheumatology International Trials Organisation provisional criteria for the evaluation of response to therapy in juvenile dermatomyositis.

Science.gov (United States)

Ruperto, Nicolino; Pistorio, Angela; Ravelli, Angelo; Rider, Lisa G; Pilkington, Clarissa; Oliveira, Sheila; Wulffraat, Nico; Espada, Graciela; Garay, Stella; Cuttica, Ruben; Hofer, Michael; Quartier, Pierre; Melo-Gomes, Jose; Reed, Ann M; Wierzbowska, Malgorzata; Feldman, Brian M; Harjacek, Miroslav; Huppertz, Hans-Iko; Nielsen, Susan; Flato, Berit; Lahdenne, Pekka; Michels, Harmut; Murray, Kevin J; Punaro, Lynn; Rennebohm, Robert; Russo, Ricardo; Balogh, Zsolt; Rooney, Madeleine; Pachman, Lauren M; Wallace, Carol; Hashkes, Philip; Lovell, Daniel J; Giannini, Edward H; Gare, Boel Andersson; Martini, Alberto

2010-11-01

To develop a provisional definition for the evaluation of response to therapy in juvenile dermatomyositis (DM) based on the Paediatric Rheumatology International Trials Organisation juvenile DM core set of variables. Thirty-seven experienced pediatric rheumatologists from 27 countries achieved consensus on 128 difficult patient profiles as clinically improved or not improved using a stepwise approach (patient's rating, statistical analysis, definition selection). Using the physicians' consensus ratings as the "gold standard measure," chi-square, sensitivity, specificity, false-positive and-negative rates, area under the receiver operating characteristic curve, and kappa agreement for candidate definitions of improvement were calculated. Definitions with kappa values >0.8 were multiplied by the face validity score to select the top definitions. The top definition of improvement was at least 20% improvement from baseline in 3 of 6 core set variables with no more than 1 of the remaining worsening by more than 30%, which cannot be muscle strength. The second-highest scoring definition was at least 20% improvement from baseline in 3 of 6 core set variables with no more than 2 of the remaining worsening by more than 25%, which cannot be muscle strength (definition P1 selected by the International Myositis Assessment and Clinical Studies group). The third is similar to the second with the maximum amount of worsening set to 30%. This indicates convergent validity of the process. We propose a provisional data-driven definition of improvement that reflects well the consensus rating of experienced clinicians, which incorporates clinically meaningful change in core set variables in a composite end point for the evaluation of global response to therapy in juvenile DM. Copyright © 2010 by the American College of Rheumatology.

76 FR 77981 - Build-A-Bear Workshop, Inc., Provisional Acceptance of a Settlement Agreement and Order

Science.gov (United States)

2011-12-15

... CONSUMER PRODUCT SAFETY COMMISSION [CPSC Docket No. 12-C0004] Build-A-Bear Workshop, Inc... 1118.20(e). Published below is a provisionally-accepted Settlement Agreement with Build-A-Bear Workshop..., Build-A-Bear Workshop, Inc. (``Build-A-Bear'') and staff of the United States Consumer Product Safety...

Provisional energy balance of France for 2002; Bilan energetique provisoire de la France pour 2002

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

A provisional energy accounting in France for 2002 is presented. Statistical data and diagrams are provided to detail and discuss the economical and energy context, the primary energy consumption, the national production and the energy dependence, the primary energy consumption for each energy source, the sectorial analysis of the energy consumption and the carbon dioxide emissions. (A.L.B.)

Effects of surface treatment and artificial aging on the shear bond strength of orthodontic brackets bonded to four different provisional restorations.

Science.gov (United States)

Al Jabbari, Youssef S; Al Taweel, Sara M; Al Rifaiy, Mohammed; Alqahtani, Mohammed Q; Koutsoukis, Theodoros; Zinelis, Spiros

2014-07-01

To evaluate the combined effects of material type, surface treatment, and thermocycling on the bond strength of orthodontic brackets to materials used for the fabrication of provisional crowns. Four materials were included in this study (ProTemp, Trim Plus, Trim II, and Superpont C+B). Sixty cylindrical specimens (1 × 3 cm) were prepared from each material and equally divided into three groups. The first group was ground with silica carbide paper, the second was polished with pumice, and the last group was sandblasted with 50-µm aluminum oxide particles. Stainless-steel maxillary central incisor brackets (Victory Series, 3M) were bonded to the provisional material specimens with Transbond XT light-cured composite resin, and half of the specimens from each group were thermocycled 500 times in 5°C and 55°C water baths. Then the brackets were debonded with shear testing, and the results were statistically analyzed by three-way analysis of variance and Tukey's multiple-comparison tests at α  =  0.05. Adhesive Remnant Index (ARI) was also identified. Before and after thermocycling, ProTemp materials showed the highest shear bond strength with orthodontic brackets (10.3 and 13.1 MPa, respectively). The statistical analysis indicated an interaction among the three independent variables (P < .05) and statistically significant differences in bond strength among provisional materials (P < .001), surface treatments (P < .001), and thermocycling (P < .05). According to the ARI, most groups demonstrated adhesive failure. The provisional material type, surface treatment, and artificial aging have a significant effect on bond strength. Sandblasting treatment exerts a beneficial effect on shear bond strength.

Final remediation of the provisional storage near Zavratec

International Nuclear Information System (INIS)

Zeleznik, N.; Mele, I.

2000-01-01

In the Western part of Slovenia near the village of Zavratec radioactive waste from the decontamination of the Oncological Institute has been stored in an old abandoned military barracks for many decades. The ARAO Agency had been assigned to remediate this provisional storage. In 1996 the first phase of the remediation was concluded, in which the measurements, inventorying and repacking of radioactive waste were carried out. At the end of this phase the waste was restored. After three years of suspension, the remedial work continued in autumn 1999 with the separation of radioactive from non-radioactive waste and transportation of all radioactive waste to the Slovenian central storage for small producers near Ljubljana. At the beginning of the year 2000 the old storage near Zavratec was completely decontaminated to be released for unrestricted use. The preparation for and the implementation of remedial actions are presented in the paper. (author)

Provisional Crown Dislodgement during Scuba Diving: A Case of Barotrauma

Directory of Open Access Journals (Sweden)

Meenal Nitin Gulve

2013-01-01

Full Text Available Changes in ambient pressure, for example, during flying, diving, or hyperbaric oxygen therapy, can lead to barotrauma. Although it may seem that this issue was neglected in dental education and research in recent decades, familiarity with and understanding of these facts may be of importance for dental practitioners. We report the case of a patient who experienced barotrauma involving dislodgement of a provisional crown during scuba diving. Patients who are exposed to pressure changes as a part of their jobs or hobbies and their dentists should know the causes of barotrauma. In addition, the clinician must be aware of the possible influence of pressure changes on the retention of dental components.

Determination of the 24-hours survival of stored red cells beyond the legal duration (42 and 49 days). Value of a double labelling

International Nuclear Information System (INIS)

Messian, O.; Noel, L.; Saint-Paul, B.; Fabre, G.; Saint-Blancard, J.

1985-01-01

Red cell double labelling using chromium 51 and Tc 99m proved to be the good method for the measurement of 24-hour post-transfusion survival values of red cells stored at 4 0 C. Satisfactory results were obtained with the preservative solution PAGGSS (Phosphate Adenine Guanosine Glucose Sorbitol Saline) for 42 and 49 days, and with ADSOL (Adenine Dextrose Saline Mannital) for 42 days. But for 49 days ADSOL does not maintain 24-hour post-transfusion survival of the cells at an acceptable level, 70 per cent, for this length of time [fr

Living hours under pressure

DEFF Research Database (Denmark)

Ilsøe, Anna; Larsen, Trine Pernille; Felbo-Kolding, Jonas

2017-01-01

Purpose The purpose of this paper is to investigate the effect of part-time work on absolute wages. The empirical focus is wages and working hours in three selected sectors within private services in the Danish labour market – industrial cleaning, retail, hotels and restaurants – and their agreem......Purpose The purpose of this paper is to investigate the effect of part-time work on absolute wages. The empirical focus is wages and working hours in three selected sectors within private services in the Danish labour market – industrial cleaning, retail, hotels and restaurants...... in industrial cleaning includes a minimum floor of 15 weekly working hours – this is not the case in retail, hotels and restaurants. This creates a loophole in the latter two sectors that can be exploited by employers to gain wage flexibility through part-time work. Originality/value The living wage literature...

Averaging and sampling for magnetic-observatory hourly data

Directory of Open Access Journals (Sweden)

J. J. Love

2010-11-01

Full Text Available A time and frequency-domain analysis is made of the effects of averaging and sampling methods used for constructing magnetic-observatory hourly data values. Using 1-min data as a proxy for continuous, geomagnetic variation, we construct synthetic hourly values of two standard types: instantaneous "spot" measurements and simple 1-h "boxcar" averages. We compare these average-sample types with others: 2-h average, Gaussian, and "brick-wall" low-frequency-pass. Hourly spot measurements provide a statistically unbiased representation of the amplitude range of geomagnetic-field variation, but as a representation of continuous field variation over time, they are significantly affected by aliasing, especially at high latitudes. The 1-h, 2-h, and Gaussian average-samples are affected by a combination of amplitude distortion and aliasing. Brick-wall values are not affected by either amplitude distortion or aliasing, but constructing them is, in an operational setting, relatively more difficult than it is for other average-sample types. It is noteworthy that 1-h average-samples, the present standard for observatory hourly data, have properties similar to Gaussian average-samples that have been optimized for a minimum residual sum of amplitude distortion and aliasing. For 1-h average-samples from medium and low-latitude observatories, the average of the combination of amplitude distortion and aliasing is less than the 5.0 nT accuracy standard established by Intermagnet for modern 1-min data. For medium and low-latitude observatories, average differences between monthly means constructed from 1-min data and monthly means constructed from any of the hourly average-sample types considered here are less than the 1.0 nT resolution of standard databases. We recommend that observatories and World Data Centers continue the standard practice of reporting simple 1-h-average hourly values.

The provisional ACR/EULAR definition of remission in RA : a comment on the patient global assessment criterion

NARCIS (Netherlands)

Vermeer, Marloes; Kuper, Hillechiena H.; van der Bijl, Arie E.; Baan, Henriette; Posthumus, Marcel D.; Brus, Herman L. M.; van Riel, Piet L. C. M.; van de Laar, Mart A. F. J.

Objectives. The provisional ACR/European League Against Rheumatism (EULAR) definition of remission in RA requires a score of 41 on the patient global assessment (PGA, 0-10 scale). We explored the relation between the PGA criterion and the patient's clinical disease state in an observational dataset.

Standard deviation of wind direction as a function of time; three hours to five hundred seventy-six hours

International Nuclear Information System (INIS)

Culkowski, W.M.

1976-01-01

The standard deviation of horizontal wind direction sigma/sub theta/ increases with time of averaging up to a maximum value of 104 0 . The average standard deviation of horizontal wind directions averaged over periods of 3, 5, 10, 16, 24, 36, 48, 72, 144, 288, and 576 hours were calculated from wind data obtained from a 100 meter tower in the Oak Ridge area. For periods up to 100 hours, sigma/sub theta/ varies as t/sup .28/; after 100 hours sigma/sub theta/ varies as 6.5 ln t

Evaluation of bond strength between grooved titanium alloy implant abutments and provisional veneering materials after surface treatment of the abutments: An in vitro study

Directory of Open Access Journals (Sweden)

Gowtham Venkat

2017-01-01

Full Text Available Introduction: Titanium has become the material of choice with greater applications in dental implants. The success of the dental implant does not only depend on the integration of the implant to the bone but also on the function and longevity of the superstructure. The clinical condition that demands long-term interim prosthesis is challenging owing to the decreased bond between the abutment and the veneering material. Hence, various surface treatments are done on the abutments to increase the bond strength. Aim: This study aimed to evaluate the bond strength between the abutment and the provisional veneering materials by surface treatments such as acid etching, laser etching, and sand blasting of the abutment. Materials and Methods: Forty titanium alloy abutments of 3 mm diameter and 11 mm height were grouped into four groups with ten samples. Groups A, B, C, and D are untreated abutments, sand blasted with 110 μm aluminum particles, etched with 1% hydrofluoric acid and 30% nitric acid, and laser etched with Nd: YAG laser, respectively. Provisional crowns were fabricated with bis-acrylic resin and cemented with noneugenol temporary luting cement. The shear bond strength was measured in universal testing machine using modified Shell–Nielsen shear test after the cemented samples were stored in water at 25°C for 24 h. Load was applied at a constant cross head speed of 5 mm/min until a sudden decrease in resistance indicative of bond failure was observed. The corresponding force values were recorded, and statistical analysis was done using one-way ANOVA and Newman–Keuls post hoc test. Results: The laser-etched samples showed higher bond strength. Conclusion: Among the three surface treatments, laser etching showed the highest bond strength between titanium alloy implant abutment and provisional restorations. The sand-blasted surfaces demonstrated a significant difference in bond strength compared to laser-etched surfaces. The results of this

Evaluation of Bond Strength between Grooved Titanium Alloy Implant Abutments and Provisional Veneering Materials after Surface Treatment of the Abutments: An In vitro Study.

Science.gov (United States)

Venkat, Gowtham; Krishnan, Murugesan; Srinivasan, Suganya; Balasubramanian, Muthukumar

2017-01-01

Titanium has become the material of choice with greater applications in dental implants. The success of the dental implant does not only depend on the integration of the implant to the bone but also on the function and longevity of the superstructure. The clinical condition that demands long-term interim prosthesis is challenging owing to the decreased bond between the abutment and the veneering material. Hence, various surface treatments are done on the abutments to increase the bond strength. This study aimed to evaluate the bond strength between the abutment and the provisional veneering materials by surface treatments such as acid etching, laser etching, and sand blasting of the abutment. Forty titanium alloy abutments of 3 mm diameter and 11 mm height were grouped into four groups with ten samples. Groups A, B, C, and D are untreated abutments, sand blasted with 110 μm aluminum particles, etched with 1% hydrofluoric acid and 30% nitric acid, and laser etched with Nd: YAG laser, respectively. Provisional crowns were fabricated with bis-acrylic resin and cemented with noneugenol temporary luting cement. The shear bond strength was measured in universal testing machine using modified Shell-Nielsen shear test after the cemented samples were stored in water at 25°C for 24 h. Load was applied at a constant cross head speed of 5 mm/min until a sudden decrease in resistance indicative of bond failure was observed. The corresponding force values were recorded, and statistical analysis was done using one-way ANOVA and Newman-Keuls post hoc test. The laser-etched samples showed higher bond strength. Among the three surface treatments, laser etching showed the highest bond strength between titanium alloy implant abutment and provisional restorations. The sand-blasted surfaces demonstrated a significant difference in bond strength compared to laser-etched surfaces. The results of this study confirmed that a combination of surface treatments and bond agents enhances the

The provisional ACR/EULAR definition of remission in RA: a comment on the patient global assessment criterion

NARCIS (Netherlands)

Vermeer, M.; Kuper, Hillechina H.; van der Bijl, Arie E.; Baan, H.; Posthumus, Marcel D.; Brus, Herman L.M.; van Riel, Piet L.C.M.; van de Laar, Mart A F J

2012-01-01

Objectives. The provisional ACR/European League Against Rheumatism (EULAR) definition of remission in RA requires a score of ≤1 on the patient global assessment (PGA, 0–10 scale). We explored the relation between the PGA criterion and the patient's clinical disease state in an observational dataset.

Color stability and flexural strength of poly (methyl methacrylate) and bis-acrylic composite based provisional crown and bridge auto-polymerizing resins exposed to beverages and food dye: an in vitro study.

Science.gov (United States)

Gujjari, Anil K; Bhatnagar, Vishrut M; Basavaraju, Ravi M

2013-01-01

To evaluate the color stability and flexural strength of poly (methyl methacrylate) (PMMA) and bis-acrylic composite based provisional crown and bridge auto-polymerizing resins exposed to tea, coffee, cola, and food dye. Two provisional crown and bridge resins, one DPI self-cure tooth molding powder (PMMA) (Group A), and one Protemp 4 Temporization Material (bis-acrylic composite) (Group B) were used. Disk-shaped specimens for color stability testing (n = 30 for each material) and bar-shaped specimens for flexural strength testing (n = 30 for each material) were fabricated using a metal mold. The specimens were immersed in artificial saliva, artificial saliva + tea, artificial saliva + coffee, artificial saliva + cola, and artificial saliva + food dye solutions and stored in an incubator at 37°C. Color measurements were taken before immersion, and then after 3 and 7 days of immersion. Flexural strength was evaluated after 7 days of immersion. Group A showed significantly higher color stability as compared to Group B, and artificial saliva + coffee solution had the most staining capacity for the resins. Test solutions had no effect on the flexural strength of Group A, but Group B specimens immersed in artificial saliva + cola showed significantly lower flexural strength values as compared to the control group. The findings of the study showed that for materials used in the study, PMMA was more color stable than bis-acrylic composite based resin. Also, material based on PMMA was more resistant to damage from dietary beverages as compared to bis-acrylic composite based provisional crown and bridge resin.

Immediate provisional restoration of an implant placed in a fresh primary maxillary canine extraction socket: a case report.

Science.gov (United States)

Turkyilmaz, Ilser; Shapiro, Vladimir

2011-01-01

This study describes a clinical case in which a primary maxillary canine with both mobility and root resorption was replaced with an immediately restored dental implant placed into the fresh extraction socket. The implant achieved high primary stability, as determined by resonance frequency analysis, and it was immediately restored with a provisional acrylic resin crown with no centric occlusion. An all-ceramic permanent crown replaced the provisonal crown four months after implant surgery. The implant was stable and no periapical radiolucencies, bleeding on probing, or pathologic probing depth were recorded after one year. The peri-implant soft tissue level appeared stable, and the interdental papillae were preserved, contributing to an optimum final esthetic result. This case supports the use of single implants for the replacement of extracted primary teeth, especially in areas where esthetics is a high priority. The immediate provisional crown maintained soft tissue contours and papillary height.

Predictive values of early rest/24 hour delay Tl-201 perfusion SPECT for wall motion improvement in patients with acute myocardial infarction after reperfusion

International Nuclear Information System (INIS)

Hyun, In Young; Kwan, June

1998-01-01

We studied early rest/24 hour delay Tl-201 perfusion SPECT for prediction of wall motion improvement after reperfusion in patients with acute myocardial infarction. Among 17 patients (male/female=11/6, age: 59±13) with acute myocardial infarction, 15 patients were treated with percutaneous transcoronary angioplasty (direct:2, delay:11) and intravenous urokinase (2). Spontaneous resolution occurred in infarct related arteries of 2 patients. We confirmed TIMI 3 flow of infarct-related artery after reperfusion in all patients with coronary angiography. We performed rest Tl-201 perfusion SPECT less then 6 hours after reperfusion and delay Tl-201 perfusion SPECT next day. Tl-201 uptake was visually graded as 4 point score from normal (0) to severe defect (3). Rest Tl-201 uptake ≤2 or combination of rest Tl-201 uptake ≤2 or late reversibility were considered to be viable. Myocardial wall motion was graded as 5 point score from normal (1) to dyskinesia (5). Myocardial wall motion was considered to be improved when a segment showed an improvement ≥1 grade in follow up echo compared with the baseline values. Among 98 segments with wall motion abnormality, the severity of myocardial wall motion decrease was as follow: mild hypokinesia: 18/98 (18%), severe hypokinesia: 28/98 (29%), akinesia: 51/98 (52%), dyskinesia: 1/98 (1%). The wall motion improved in 85%. Redistribution (13%), and reverse redistribution (4%) were observed in 24 hour delay SPECT. Positive predictive value (PPV) and negative predictive value (NPV) of combination of late reversibility and rest Tl-201uptake were 99%, and 54%.PPV and NPV of rest Tl-201 uptake were 100% and 52% respectively. Predictive values of comibination of rest Tl-201 uptake and late reversibility were not significantly different compared with predictive values of rest Tl-201 uptake only. We conclude that early Tl-201 perfusion SPECT predict myocardial wall motion improvement with excellent positive but relatively low negative

Best Practices and Provisional Guidelines for Integrating Mobile, Virtual, and Videogame-Based Training and Assessments

Science.gov (United States)

2014-01-01

videogame -based platforms, 2) role of assessments and how they can be implemented within these platforms, or 3) benefits or challenges of the...Technical Report 1334 Best Practices and Provisional Guidelines for Integrating Mobile, Virtual, and Videogame -Based Training and...Virtual, and Videogame -Based Training and Assessments 5a. CONTRACT OR GRANT NUMBER W5J9CQ-11-D-0002 5b. PROGRAM ELEMENT NUMBER 622785

In vitro comparative evaluation of the effect of two different fiber reinforcements on the fracture toughness of provisional restorative resins

Directory of Open Access Journals (Sweden)

Vaibhav D Kamble

2012-01-01

Clinical Implications: On the basis of this in--vitro study, the use of Glass and Polyethylene fibers tested may be an effective way to reinforce resins used to fabricate fixed provisional restorations.

Studies on the T sub 3 suppression test with reference to the thyrodial sup 123 I uptake in Graves' disease; Comparison of 24-hour and 3-hour uptake

Energy Technology Data Exchange (ETDEWEB)

Yamaguchi, Takahiko; Kobayashi, Isao; Yamaguchi, Yoshiyuki; Iwashita, Akira; Inukai, Toshihiko; Ohshima, Kihachi; Shimomura, Yohnosuke; Kobayashi, Setsuo (Gunma Univ., Maebashi (Japan). School of Medicine)

1990-06-01

Eighty-three patients with Graves' disease had been treated with methylmercaptoimidazole (MMI). They were prescribed a maintenance dose of antithyroid drug (MMI, 5 mg/day) at the time of a T{sub 3} suppression test. The 3-hour and 24-hour thyroidal {sup 123}I uptake after T{sub 3} administration (75 {mu}g/day, 2 weeks) were measured (post T{sub 3} uptake). In 38 patients whose post T{sub 3} uptake was below 35% in post T{sub 3} 24-hour uptake, treatment was stopped. The T{sub 3} suppression test was then repeated 1 and 3 months later. During a one-year follow up, 26 remained well, while 12 relapsed within 6 to 12 months. We have observed a good correlation between 3-hour uptake and 24-hour uptake of {sup 123}I after T{sub 3} administration (r=0.847, p<0.001). In 38 patients who showed positive T{sub 3} suppression, most patients with MMI withdrawal produced a marked overshoot of post T{sub 3} 3-hour and 24-hour uptake at one month. Retrospective analysis indicated that there was no significant difference in circulating thyroid hormone levels between remission and relapse groups. The present study provides evidence that 3-hour uptake values are able to be substituted for 24-hour uptake values during a T{sub 3} suppression test. In addition, overshoot of thyroidal uptake after antithyroid drug withdrawal was observed in 3-hour values, similar to 24-hour values. (author).

Assessment of the Swedish EQ-5D experience-based value sets in a total hip replacement population.

Science.gov (United States)

Nemes, Szilárd; Burström, Kristina; Zethraeus, Niklas; Eneqvist, Ted; Garellick, Göran; Rolfson, Ola

2015-12-01

All patients undergoing elective total hip replacement (THR) in Sweden are asked to complete a survey, including the EQ-5D. Thus far, EQ-5D values have been presented using the UK TTO value set based on hypothetical values. Shift to the use of the recently introduced Swedish experience-based value set, derived from a representative Swedish population, is an appealing alternative. To investigate how accurate the Swedish experience-based VAS value set predicts observed EQ VAS values and to compare correlations between Swedish and UK value sets including two provisional value sets derived from the THR population. Pre- and one-year postoperative data from 56,062 THR patients from the Swedish Hip Arthroplasty Register were used. Agreement between the observed and the predicted EQ VAS values was assessed with correlation. Based on pre- and postoperative data, we constructed two provisional VAS value sets. Correlations between observed and calculated values using the Swedish VAS value set were moderate (r = 0.46) in preoperative data and high (r = 0.72) in postoperative data. Correlations between UK and register-based value sets were constantly lower compared to Swedish value sets. Register-based values and Swedish values were highly correlated. The Swedish value sets are more accurate in terms of representation of the Swedish THR patients than the currently used UK TTO value set. We find it feasible to use the experience-based Swedish value sets for further presentation of EQ-5D values in the Swedish THR population.

Immediate loading versus immediate provisionalization of maxillary single-tooth replacements: a prospective randomized study with BioComp implants

NARCIS (Netherlands)

Lindeboom, Jerome A.; Frenken, Joost W.; Dubois, Leander; Frank, Michael; Abbink, Ingmar; Kroon, Frans H.

2006-01-01

PURPOSE: The aim of this prospective randomized study was to evaluate the clinical outcome of immediately loaded solid plasma sprayed (TPS) BioComp (BioComp Industries BV, Vught, The Netherlands) implants versus immediate provisionalized but non-loaded BioComp implants in the anterior and premolar

Immediate Implant Placement of a Single Central Incisor Using a CAD/CAM Crown-Root Form Technique: Provisional to Final Restoration.

Science.gov (United States)

Vafiadis, Dean; Goldstein, Gary; Garber, David; Lambrakos, Anthony; Kowalski, Bj

2017-02-01

Preserving soft and hard tissues after extraction and implant placement is crucial for anterior esthetics. This technique will show how the information gathered from a cone-beam computed tomography (CBCT) scan of the maxillary left central incisor and an intra-oral digital impression can be merged to fabricate a CAD/CAM crown-root matrix to be used as an immediate provisional restoration that mimics the natural anatomy. Due to trauma, a left central incisor appeared to be fractured and was scheduled for extraction and implant placement. The crown-root configuration captured by the CBCT scan was merged with the digital files from an intra-oral digital impression. A CAD/CAM crown-root matrix was fabricated. Because the matrix shell was fabricated with the exact anatomy of the natural tooth, it replicated the position and three dimensional anatomy of the soft and hard tissue. It was connected to the implant with a customized provisional abutment. A digital impression of a coded healing abutment was made to fabricate the final implant abutment and final restoration. Throughout the treatment time and 36 months after completion, the thickness of tissue, emergence profile, and adjacent papilla was analyzed by clinical evaluation and photography and seemed to be maintained. The use of a pre-operative intra-oral digital scan of the clinical crown-root architecture and the CBCT scan of the bone/root anatomy, can be used together to fabricate a CAD/CAM crown-root form provisional matrix. This digital design helps in the preservation of the 3D tissue topography, as well as the final restoration. The preservation of soft and hard tissue after extraction and implant placement has always been paramount for ideal anterior implant esthetics. Using the information from digital files from CBCT scans and intra-oral scans may help the clinician identify critical anatomical features that can be replicated in the provisional and final CAD/CAM restoration. (J Esthet Restor Dent 29

Requirements on the provisional safety analyses and technical comparison of safety measures

International Nuclear Information System (INIS)

2010-04-01

The concept of a Geological Underground Repository (SGT) was adopted by the Swiss Federal Council on April 2 nd , 2008. It fixes the goals and the safety technical criteria as well as the procedures for the choice of the site for an underground repository. Those responsible for waste management evaluate possible site regions according to the present status of geological knowledge and based on the safety criteria defined in SGT as well as on technical feasibility. In a first step, they propose geological repository sites for high level (HAA) and for low and intermediate level (SMA) radioactive wastes and justify their choice in a report delivered to the Swiss Federal Office of Energy. The Swiss Federal Council reviews the choices presented and, in the case of positive evaluation, approves them and considers them as an initial orientation. In a second step, based on the possible sites according to step 1, the waste management institution responsible has to reduce the repositories chosen for HAA and SMA by taking into account safety aspects, technical feasibility as well as space planning and socio-economical aspects. In making this choice, safety aspects have the highest priority. The criteria used for the evaluation in the first step have to be defined using provisional quantitative safety analyses. On the basis of the whole appraisal, including space planning and socio-economical aspects, those responsible for waste management propose at least two repository sites for HAA- and SMA-waste. Their selection is then reviewed by the authorities and, in the case of a positive assesment, the selection is taken as an intermediate result. The remaining sites are further studied to examine site choice and the delivery of a request for a design license. If necessary, the requested geological knowledge has to be confirmed by new investigations. Based on the results of the choosing process and a positive evaluation by the safety authorities, the Swiss Federal Council has to

Effect-based trigger values for in vitro bioassays: Reading across from existing water quality guideline values.

Science.gov (United States)

Escher, Beate I; Neale, Peta A; Leusch, Frederic D L

2015-09-15

Cell-based bioassays are becoming increasingly popular in water quality assessment. The new generations of reporter-gene assays are very sensitive and effects are often detected in very clean water types such as drinking water and recycled water. For monitoring applications it is therefore imperative to derive trigger values that differentiate between acceptable and unacceptable effect levels. In this proof-of-concept paper, we propose a statistical method to read directly across from chemical guideline values to trigger values without the need to perform in vitro to in vivo extrapolations. The derivation is based on matching effect concentrations with existing chemical guideline values and filtering out appropriate chemicals that are responsive in the given bioassays at concentrations in the range of the guideline values. To account for the mixture effects of many chemicals acting together in a complex water sample, we propose bioanalytical equivalents that integrate the effects of groups of chemicals with the same mode of action that act in a concentration-additive manner. Statistical distribution methods are proposed to derive a specific effect-based trigger bioanalytical equivalent concentration (EBT-BEQ) for each bioassay of environmental interest that targets receptor-mediated toxicity. Even bioassays that are indicative of the same mode of action have slightly different numeric trigger values due to differences in their inherent sensitivity. The algorithm was applied to 18 cell-based bioassays and 11 provisional effect-based trigger bioanalytical equivalents were derived as an illustrative example using the 349 chemical guideline values protective for human health of the Australian Guidelines for Water Recycling. We illustrate the applicability using the example of a diverse set of water samples including recycled water. Most recycled water samples were compliant with the proposed triggers while wastewater effluent would not have been compliant with a few

Optimizing anterior esthetics of a single-tooth implant through socket augmentation and immediate provisionalization: A case report with 7-year follow-up

Directory of Open Access Journals (Sweden)

Po-Sung Fu

2012-10-01

Full Text Available Tooth extraction inevitably accompanies alveolar ridge resorption with loss of pre-existing tissue morphology. Replacing missing teeth with dental implants has become popular, but restoring anterior teeth with implant-supported restorations is a technique-sensitive task and poses challenges for dentists. With the progress of implant dentistry, the demand for optimal esthetics has become linked with the desire for faster, easier techniques that shorten treatment time and also satisfy patients. Immediate provisionalization of a single-tooth implant provides significant benefits compared with traditional delayed protocols, such as aiding the contouring of peri-implant soft tissue and enhancing patient comfort and satisfaction. This article describes a meticulous approach to a hopeless maxillary central incisor with root fracture. The defect in the extraction socket was reconstructed using autogenous bone harvested from the chin. Four months later, an implant was installed and immediately restored. After another healing period of 6 months, the peri-implant soft tissue had been shaped and matured according to the contours of the provisional restoration. The emergence profile was used to duplicate the definitive restoration. Peri-implant esthetics was achieved through socket augmentation and immediate provisionalization of the implant. This treatment modality attained predictable and maintainable outcomes, both functionally and esthetically.

Prediction of solubility and permeability class membership: provisional BCS classification of the world's top oral drugs.

Science.gov (United States)

Dahan, Arik; Miller, Jonathan M; Amidon, Gordon L

2009-12-01

The Biopharmaceutics Classification System (BCS) categorizes drugs into one of four biopharmaceutical classes according to their water solubility and membrane permeability characteristics and broadly allows the prediction of the rate-limiting step in the intestinal absorption process following oral administration. Since its introduction in 1995, the BCS has generated remarkable impact on the global pharmaceutical sciences arena, in drug discovery, development, and regulation, and extensive validation/discussion/extension of the BCS is continuously published in the literature. The BCS has been effectively implanted by drug regulatory agencies around the world in setting bioavailability/bioequivalence standards for immediate-release (IR) oral drug product approval. In this review, we describe the BCS scientific framework and impact on regulatory practice of oral drug products and review the provisional BCS classification of the top drugs on the global market. The Biopharmaceutical Drug Disposition Classification System and its association with the BCS are discussed as well. One notable finding of the provisional BCS classification is that the clinical performance of the majority of approved IR oral drug products essential for human health can be assured with an in vitro dissolution test, rather than empirical in vivo human studies.

Provisional standards of radiation safety of flight personnel and passengers in air transport of the civil aviation

Science.gov (United States)

1977-01-01

Provisional standards for radiation affecting passenger aircraft are considered. Agencies responsible for seeing that the regulations are enforced are designated while radiation sources and types of radiation are defined. Standard levels of permissible radiation are given and conditions for radiation safety are discussed. Dosimetric equipment on board aircraft is delineated and regulation effective dates are given.

Provisional standards of radiation safety of flight personnel and passengers in air transport of the civil aviation

International Nuclear Information System (INIS)

Provisional standards for radiation affecting passenger aircraft are considered. Agencies responsible for seeing that the regulations are enforced are designated while radiation sources and types of radiation are defined. Standard levels of permissible radiation are given and conditions for radiation safety are discussed. Dosimetric equipment on board aircraft is delineated and regulation effective dates are given

Hourly wind speed analysis in Sicily

Energy Technology Data Exchange (ETDEWEB)

Bivona, S.; Leone, C. [Palermo Univ., Dip di Fisica e Technologie Relative, Palermo (Italy); Burlon, R. [Palermo Univ., Dip. di Ingegnaria Nucleare, Palermo (Italy)

2003-07-01

The hourly average wind speed data recorded by CNMCA (Centro Nazionale di Meteorologia e Climatologia Aeronautica) have been used to study the statistical properties of the wind speed at nine locations on Sicily. By grouping the observations month by month, we show that the hourly average wind speed, with calms omitted, is represented by a Weibull function. The suitability of the distribution is judged by the discrepancies between the observed and calculated values of the monthly average wind speed and of the standard deviation. (Author)

Color stability and flexural strength of poly (methyl methacrylate and bis-acrylic composite based provisional crown and bridge auto-polymerizing resins exposed to beverages and food dye: An in vitro study

Directory of Open Access Journals (Sweden)

Anil K Gujjari

2013-01-01

Full Text Available Aim: To evaluate the color stability and flexural strength of poly (methyl methacrylate (PMMA and bis-acrylic composite based provisional crown and bridge auto-polymerizing resins exposed to tea, coffee, cola, and food dye. Materials and Methods: Two provisional crown and bridge resins, one DPI self-cure tooth molding powder (PMMA (Group A, and one Protemp 4 Temporization Material (bis-acrylic composite (Group B were used. Disk-shaped specimens for color stability testing (n = 30 for each material and bar-shaped specimens for flexural strength testing (n = 30 for each material were fabricated using a metal mold. The specimens were immersed in artificial saliva, artificial saliva + tea, artificial saliva + coffee, artificial saliva + cola, and artificial saliva + food dye solutions and stored in an incubator at 37°C. Color measurements were taken before immersion, and then after 3 and 7 days of immersion. Flexural strength was evaluated after 7 days of immersion. Results: Group A showed significantly higher color stability as compared to Group B, and artificial saliva + coffee solution had the most staining capacity for the resins. Test solutions had no effect on the flexural strength of Group A, but Group B specimens immersed in artificial saliva + cola showed significantly lower flexural strength values as compared to the control group. Conclusion: The findings of the study showed that for materials used in the study, PMMA was more color stable than bis-acrylic composite based resin. Also, material based on PMMA was more resistant to damage from dietary beverages as compared to bis-acrylic composite based provisional crown and bridge resin.

Provisional in-silico biopharmaceutics classification (BCS) to guide oral drug product development.

Science.gov (United States)

Wolk, Omri; Agbaria, Riad; Dahan, Arik

2014-01-01

The main objective of this work was to investigate in-silico predictions of physicochemical properties, in order to guide oral drug development by provisional biopharmaceutics classification system (BCS). Four in-silico methods were used to estimate LogP: group contribution (CLogP) using two different software programs, atom contribution (ALogP), and element contribution (KLogP). The correlations (r(2)) of CLogP, ALogP and KLogP versus measured LogP data were 0.97, 0.82, and 0.71, respectively. The classification of drugs with reported intestinal permeability in humans was correct for 64.3%-72.4% of the 29 drugs on the dataset, and for 81.82%-90.91% of the 22 drugs that are passively absorbed using the different in-silico algorithms. Similar permeability classification was obtained with the various in-silico methods. The in-silico calculations, along with experimental melting points, were then incorporated into a thermodynamic equation for solubility estimations that largely matched the reference solubility values. It was revealed that the effect of melting point on the solubility is minor compared to the partition coefficient, and an average melting point (162.7 °C) could replace the experimental values, with similar results. The in-silico methods classified 20.76% (± 3.07%) as Class 1, 41.51% (± 3.32%) as Class 2, 30.49% (± 4.47%) as Class 3, and 6.27% (± 4.39%) as Class 4. In conclusion, in-silico methods can be used for BCS classification of drugs in early development, from merely their molecular formula and without foreknowledge of their chemical structure, which will allow for the improved selection, engineering, and developability of candidates. These in-silico methods could enhance success rates, reduce costs, and accelerate oral drug products development.

CORRELATION OF SPOT URINE ALBUMIN AND 12-HOUR URINE PROTEIN WITH 24-HOUR URINE PROTEIN IN PRE-ECLAMPSIA

Directory of Open Access Journals (Sweden)

S. Vinayachandran

2017-11-01

Full Text Available BACKGROUND Pre-eclampsia is defined as the development of new-onset hypertension in the second half of pregnancy often accompanied by new-onset proteinuria with other signs and symptoms. Proteinuria is defined by the excretion of 300 mg or more of protein in a 24-hour urine collection. To avoid time consumed in collection of 24-hour urine specimens, efforts have been made to develop faster methods to determine concentration of urine protein. Preliminary studies have suggested that 12-hour urine protein collection maybe adequate for evaluation of pre-eclampsia with advantage of early diagnosis and treatment of pre-eclampsia as well as potential for early hospital discharge and increased compliance with specimen collection. The aim of the study is to evaluate and correlate spot urine albumin and 12-hour urine protein with 24-hour urine protein in pre-eclampsia. MATERIALS AND METHODS A diagnostic evaluation study- a 24-hour urine protein, 12-hour urine protein and spot urine albumin results are analysed. Correlation of 12-hour urine protein and spot urine albumin with 24-hour urine protein is analysed using SPSS software. The strength of correlation was measured by Pearson’s correlation coefficient (r. Student’s t-test and Chi-square tests were used to compare patients with and without 24-hour urine protein ≥300 mg. Probability value of 165 mg with 24-hour urine protein ≥300 mg suggest that this test has role in the evaluation of women with suspected pre-eclampsia and could be substituted for 24-hour urine protein as a simple, faster and cheaper method.

Agitation in cognitive disorders: International Psychogeriatric Association provisional consensus clinical and research definition.

Science.gov (United States)

Cummings, Jeffrey; Mintzer, Jacobo; Brodaty, Henry; Sano, Mary; Banerjee, Sube; Devanand, D P; Gauthier, Serge; Howard, Robert; Lanctôt, Krista; Lyketsos, Constantine G; Peskind, Elaine; Porsteinsson, Anton P; Reich, Edgardo; Sampaio, Cristina; Steffens, David; Wortmann, Marc; Zhong, Kate

2015-01-01

Agitation is common across neuropsychiatric disorders and contributes to disability, institutionalization, and diminished quality of life for patients and their caregivers. There is no consensus definition of agitation and no widespread agreement on what elements should be included in the syndrome. The International Psychogeriatric Association formed an Agitation Definition Work Group (ADWG) to develop a provisional consensus definition of agitation in patients with cognitive disorders that can be applied in epidemiologic, non-interventional clinical, pharmacologic, non-pharmacologic interventional, and neurobiological studies. A consensus definition will facilitate communication and cross-study comparison and may have regulatory applications in drug development programs. The ADWG developed a transparent process using a combination of electronic, face-to-face, and survey-based strategies to develop a consensus based on agreement of a majority of participants. Nine-hundred twenty-eight respondents participated in the different phases of the process. Agitation was defined broadly as: (1) occurring in patients with a cognitive impairment or dementia syndrome; (2) exhibiting behavior consistent with emotional distress; (3) manifesting excessive motor activity, verbal aggression, or physical aggression; and (4) evidencing behaviors that cause excess disability and are not solely attributable to another disorder (psychiatric, medical, or substance-related). A majority of the respondents rated all surveyed elements of the definition as "strongly agree" or "somewhat agree" (68-88% across elements). A majority of the respondents agreed that the definition is appropriate for clinical and research applications. A provisional consensus definition of agitation has been developed. This definition can be used to advance interventional and non-interventional research of agitation in patients with cognitive impairment.

Application of the 2-piece orthodontic C-implant for provisional restoration with laser welded customized coping: a case report.

Science.gov (United States)

Paek, Janghyun; Ahn, Hyo-Won; Jeong, Do-Min; Shim, Jeong-Seok; Kim, Seong-Hun; Chung, Kyu-Rhim

2015-03-25

This article presents the application of laser welding technique to fabricate an orthodontic mini-implant provisional restoration in missing area after limited orthodontic treatment. A 15-year-old boy case is presented. Two-piece orthodontic C-implant was placed after regaining space for missing right mandibular central incisor. Due to angular deviation of implant, customized abutment was required. Ready-made head part was milled and lingual part of customized abutment was made with non-precious metal. Two parts then were laser welded (Master 1000, Elettrolaser Italy, Verona, Italy) and indirect lab composite (3 M ESPE Sinfony, St. Paul, MN, USA) was built up. The patient had successful result, confirmed by clinical and radiographic examinations. Before the patient is ready to get a permanent restoration later on, this provisional restoration will be used. This case shows that a two-piece orthodontic C-implant system can be used to maintain small edentulous space after orthodontic treatment.

Gap analysis between provisional diagnosis and final diagnosis in government and private teaching hospitals: A record-linked comparative study.

Science.gov (United States)

Chatterjee, Sudeshna; Ray, Krishnangshu; Das, Anup Kumar

2016-01-01

1. To identify the extent of clinical gaps at the context of knowledge, practice and systems. 2. To formulate necessary intervention measures towards bridging the gaps. Comparative, cross-sectional and non-interventional study. It is retrospective, record-based study conducted upon inpatients ( n = 200) of major disciplines of two teaching hospitals. Major outcome variables were to observe the matching and un-matching of final and provisional diagnosis by using ICD-10 criteria. Comparative analysis of specific and selective gaps were estimated in terms of percentage (%). Pilot observation showed the existence of gaps between provisional and final diagnosis in both private and government institution. Both knowledge and skill gaps were evident in caregivers and gap in documentation was existent in medical records. The pilot data is may be an eye-opener to public and private governance systems for understanding and revising the process service planning and service delivery. Necessary intervention measures may be contemplated towards enhancing diagnostic skill of doctors for quality hospital care.

Use of Resin-Based Provisional Material to Create the Posterior Palatal Seal in Complete Denture Definitive Impressions.

Science.gov (United States)

de Souza Batista, Victor Eduardo; Vechiato-Filho, Aljomar José; Pellizzer, Eduardo Piza; Verri, Fellippo Ramos

2017-11-17

The purpose of this article was to present an alternative procedure using resin-based provisional material to create the posterior palatal seal (PPS). This method offers more practicality in clinical routine and increased control for addition of material to create the PPS when compared to traditional techniques such as the use of impression wax. © 2017 by the American College of Prosthodontists.

The Provisional Irish Republican Army and the Development of Mortars

Directory of Open Access Journals (Sweden)

Gary Ackerman

2016-03-01

Full Text Available The Provisional Irish Republican Army (PIRA repeatedly showed itself to be one of the most inventive and adaptive of all the violent non-state actors who operated in the latter part of the twentieth century. Among its most innovative exploits was the PIRA’s successful development and fielding – spanning almost its entire operational lifetime – of improvised mortar systems. This chapter will trace the sustained development of mortars, including the underlying motivations for pursuing mortars as a complex engineering effort, the process by which the development took place and the underpinnings of its success. The discussion will show that the PIRA’s mortar development program was born out of tactical necessity but enabled by good organizational practices and the organization’s access to materials, expertise and places in which to leverage these.

Patient dose reference values for explorations of radiodiagnostic

International Nuclear Information System (INIS)

Vano, E.; Gonzalez, L.; Moran, P.; Calzado, A.; Delgado, V.; Ruiz, M.J.

1992-01-01

Among the results of the research programs developed in the European Community dealing with radiological protection, dose estimation and quality control in radiodiagnostics, the preparation of a document on Quality criteria for radiodiagnostic images is worthy of note. This document proposes criteria for image quality and patient dose reference values for explorations of thorax, cranium, lumbar region, pelvis, urinary tract and breast. Said reference values, while indicative, are merely an average approximation, from which the radiodiagnostic services of each area may differ significantly, as can be deduced from a EC-coordinated project. With this in mind, and following a strategy applied in the EC to establish said reference values, in this report, provisional reference values, specific for Spain, are proposed for simple examinations (those analyzed by the group of EC experts, among others) and complex probes (intravenous urography, opaque enema and esophagogastroduodenal enema). (author)

Relative value of clinical variables, bicycle ergometry, rest radionuclide ventriculography and 24 hour ambulatory electrocardiographic monitoring at discharge to predict 1 year survival after myocardial infarction

NARCIS (Netherlands)

P.M. Fioretti (Paolo); R.W. Brower (Ronald); M.L. Simoons (Maarten); H.J. ten Katen (Harald); A. Beelen (Anita); T. Baardman (Taco); J. Lubsen (Jacob); P.G. Hugenholtz (Paul)

1986-01-01

textabstractThe relative value of predischarge clinical variables, bicycle ergometry, radionuclide ventriculography and 24 hour ambulatory electrocardiographic monitoring for predicting survival during the first year in 351 hospital survivors of acute myocardial infarction was assessed. Discriminant

Sub-hour solar data for power system modeling from static spatial variability analysis

Energy Technology Data Exchange (ETDEWEB)

Hummon, Marissa R.; Ibanez, Eduardo; Brinkman, Gregory; Lew, Debra [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2012-07-01

High penetration renewable integration studies need high quality solar power data with spatial-temporal correlations that are representative of a real system. For instance, as additional solar power sites are added, the relative amount of variability should decrease due to spatial averaging of localized irradiance fluctuations. This presentation will summarize the research relating sequential point-source sub-hour global horizontal irradiance (GHI) values to static, spatially distributed GHI values. This research led to the development of an algorithm for generating coherent sub-hour datasets that span distances ranging from 10 km to 4,000 km. The algorithm, in brief, generates synthetic GHI values at an interval of one minute, for a specific location, using SUNY/Clean Power Research, satellite-derived, hourly irradiance values for the nearest grid cell to that location and grid cells within 40 km. During each hour, the observed GHI value for the grid cell of interest and the surrounding grid cells is related, via probability distributions, to one of live temporal cloud coverage classifications (class I, II, III, IV, V). Synthesis algorithms are used to select one-minute time step GHI values based on the classification of the grid cell of interest in a particular hour. Three primary statistical measures of the dataset are demonstrated: reduction in ramps as a function of aggregation; coherence of GHI values across sites ranging from 6 to 400 km apart over time scales from one minute to three hours; and ramp magnitude and duration distributions as a function of time of day and day of year. (orig.)

Immediate provisionalization of dental implants placed in healed alveolar ridges and extraction sockets: a 5-year prospective evaluation.

Science.gov (United States)

Cooper, Lyndon F; Reside, Glenn J; Raes, Filiep; Garriga, Joan Soliva; Tarrida, Luis Giner; Wiltfang, Jörg; Kern, Matthias; De Bruyn, Hugo

2014-01-01

This 5-year prospective multicenter study compared implant survival and success, peri-implant health and soft tissue responses, crestal bone level stability, and complication rates following immediate loading of single OsseoSpeed implants placed in anterior maxillary healed ridges or extraction sockets. Individuals requiring anterior tooth replacement with single implants were treated and immediately provisionalized. Definitive all-ceramic crowns were placed at 12 weeks. Implant survival, bone levels, soft tissue levels, and peri-implant health were monitored for 5 years. One hundred thirteen patients received implants in fresh sockets (55) and healed ridges (58). After 5 years, 45 and 49 patients remained for evaluation, respectively. During the first year, three implants failed in the extraction socket group (94.6% survival) and one implant failed in the healed ridge group (98.3% survival); this difference was not significant. No further implant failures were recorded. After 5 years, the interproximal crestal bone levels were located a mean of 0.43 ± 0.63 mm and 0.38 ± 0.62 mm from the reference points of implants in sockets and healed ridges (not a significant difference). In both groups, papillae increased over time and peri-implant mucosal zenith positions were stable from the time of definitive crown placement in sockets and healed ridges. Compared to flap surgery for implants in healed ridges, flapless surgery resulted in increased peri-implant mucosal tissue dimension (average, 0.78 ± 1.34 mm vs 0.19 ± 0.79 mm). After 5 years, the bone and soft tissue parameters that characterize implant success and contribute to dental implant esthetics were similar following the immediate provisionalization of implants in sockets and healed ridges. The overall tissue responses and reported implant survival support the immediate provisionalization of dental implants in situations involving healed ridges and, under ideal circumstances, extraction sockets.

Multifactorial analysis of variables influencing the fracture strength of repair joints for provisional restorative materials using the statistically based Taguchi method

Directory of Open Access Journals (Sweden)

Chun-Jen Cheng

2010-06-01

Conclusion: Within the limitations of this study, these four design factors had different contributions to the fracture strength of repaired provisional restorations. Clinicians must be aware of the sequence of importance in determining better problem-solving methods.

The Value of a Checklist for Child Abuse in Out-of-Hours Primary Care: To Screen or Not to Screen.

Science.gov (United States)

Schouten, Maartje Cm; van Stel, Henk F; Verheij, Theo Jm; Houben, Michiel L; Russel, Ingrid Mb; Nieuwenhuis, Edward Es; van de Putte, Elise M

2017-01-01

To assess the diagnostic value of the screening instrument SPUTOVAMO-R2 (checklist, 5 questions) for child abuse at Out-of-hours Primary Care locations (OPC), by comparing the test outcome with information from Child Protection Services (CPS). Secondary, to determine whether reducing the length of the checklist compromises diagnostic value. All children (abuse (32.8%). The positive predictive value (PPV) of the checklist for child abuse was 8.3 (95% CI 3.9-15.2). The negative predictive value (NPV) was 99.1 (98.8-99.3), with 52 false negatives. When the length of the checklist was reduced to two questions closely related to the medical process (SPUTOVAMO-R3), the PPV was 9.1 (3.7-17.8) and the NPV 99.1 (98.7-99.3). These two questions are on the injury in relation to the history, and the interaction between child and parents. The checklist SPUTOVAMO-R2 has a low detection rate of child abuse within the OPC setting, and a high false positive rate. Therefore, we recommend to use the shortened checklist only as a tool to increase the awareness of child abuse and not as a diagnostic instrument.

Immediate provisionalization of immediate implants in the esthetic zone: a prospective case series evaluating implant survival, esthetics, and bone maintenance.

Science.gov (United States)

Levin, Barry P; Wilk, Brian L

2013-05-01

This prospective study evaluates immediately placed and immediately provisionalized implants in the esthetic zone. All implants were TiO2-blasted, fluoride-modified, grade 4 titanium, with a coronal microthread design. Bone grafting and guided bone regeneration (GBR) was performed at all sites, and screw-retained temporary restorations were delivered on the day of surgery. All of the provisional crown(s) were out of occlusal function and remained in place for at least 8 weeks prior to initiation of definitive restorative therapy. Bone maintenance (BM) was considered successful if radiographs demonstrated proximal bone levels even or coronal to the implant platform. Of the 29 implants placed, 25 (86 percent) achieved bone maintenance at least 12 months post-loading with the final restorations. This study was considered successful, with 100 percent implant survival after at least 1 year loading of the final restoration, and 100 percent of patients were satisfied with the esthetics of their implant treatment.

Value of travel time.

Science.gov (United States)

2016-08-01

Knowingly or not, people generally place economic value on their time. Wage workers are paid a rate per hour, and service providers may charge per hour of their time. In the transportation realm, travelers place a value on their travel time and have ...

Evaluation of the effect of various beverages and food material on the color stability of provisional materials - An in vitro study.

Science.gov (United States)

Gupta, Gaurav; Gupta, Tina

2011-07-01

THIS STUDY EVALUATED THE COLOR STABILITY OF FOUR PROVISIONAL MATERIALS: 1) Poly-methyl methacrylates (DPI); 2) Bis-acryl composite (ProtempTM II - 3M ESPE); 3) Bis-acryl composite (Systemp® c and b - Ivoclar Vivadent) and 4) Light polymerized composite resin (Revotek LC- GC). The color and color difference of each specimen after immersion in different staining solutions i.e. 1) tea and artificial saliva, 2) coffee and artificial saliva, 3) Pepsi and artificial saliva, 4) turmeric solution and artificial saliva was measured using reflectance spectrophotometer with CIELAB system before immersion and after immersion at 2, 5 ,7 , 10 and 15 days. Revotek LC- GC (light polymerized composite resin) was found to be the most color stable provisional restorative material followed by Protemp II (Bis-acryl composite), Systemp (Bis-acryl composite) and DPI (Methylmethacrylate resin). Turmeric solution had the maximum staining potential followed by coffee, tea and Pepsi.

Elution of Monomers from Provisional Composite Materials

Directory of Open Access Journals (Sweden)

Simon Daniel Schulz

2015-01-01

Full Text Available The aim of this study was to evaluate the elution of substances from different materials used for the manufacturing of temporary indirect restorations, after storage in saliva and ethanol 75%. 10 samples of three chemically cured materials (Protemp 3 Garant, Systemp.c&b, and Trim and one light-cured material (Clip F were stored in saliva and ethanol 75% for 24 h, 7, and days 28 days. From the storage media at each time period, samples were prepared and analysed by LC-MS/MS, in order to access the elution of monomers. The results differed among the materials (P ≤ 0.05. No monomers were detected in the samples of Protemp 3 Garant and Clip F. Substances were detected only in ethanol samples of Systemp.c&b and Trim. The amount of BisGMA, TEGDMA, and UDMA 2 released from Systemp.c&b was higher compared to Trim. Storage time affected the release of substances (P ≤ 0.05. The highest release was observed within the first 24 h. It can be concluded that provisional resin composite materials do not show high release of monomers and this release is material dependent. However, the detection of additional peaks during the analysis, suggesting the formation of by-products of the eluted substances, may not be in favour of these materials with respect to their toxicity.

Gap analysis between provisional diagnosis and final diagnosis in government and private teaching hospitals: A record-linked comparative study

Directory of Open Access Journals (Sweden)

Sudeshna Chatterjee

2016-01-01

Full Text Available Aims: 1. To identify the extent of clinical gaps at the context of knowledge, practice and systems. 2. To formulate necessary intervention measures towards bridging the gaps. Settings and Design: Comparative, cross-sectional and non-interventional study. Methods and Material: It is retrospective, record-based study conducted upon inpatients (n = 200 of major disciplines of two teaching hospitals. Major outcome variables were to observe the matching and un-matching of final and provisional diagnosis by using ICD-10 criteria. Statistical Analysis Used: Comparative analysis of specific and selective gaps were estimated in terms of percentage (%. Results: Pilot observation showed the existence of gaps between provisional and final diagnosis in both private and government institution. Both knowledge and skill gaps were evident in caregivers and gap in documentation was existent in medical records. Conclusions: The pilot data is may be an eye-opener to public and private governance systems for understanding and revising the process service planning and service delivery. Necessary intervention measures may be contemplated towards enhancing diagnostic skill of doctors for quality hospital care.

The Provisional Staff Regulations of the Agency. An Amendment to Annex II

Energy Technology Data Exchange (ETDEWEB)

NONE

1960-11-30

On 17 June 1960 the Board of Governors amended Annex II, part B, paragraph 4 to the Provisional Staff Regulations of the Agency to read: '4. The Director General shall establish rules by which an extra payment may be made to a staff member in the General Service category who passes an appropriate test and demonstrates continued proficiency in the use of either two or more official languages, or in one official language and in the language of his duty station if that language is not his mother tongue. Such payment shall be equivalent to an additional step increment and may extend beyond the maximum salary of the grade of the staff member concerned.' and decided that this amendment should be effective as from 1 January 1960.

The Provisional Staff Regulations of the Agency. An Amendment to Annex II

International Nuclear Information System (INIS)

1960-01-01

On 17 June 1960 the Board of Governors amended Annex II, part B, paragraph 4 to the Provisional Staff Regulations of the Agency to read: '4. The Director General shall establish rules by which an extra payment may be made to a staff member in the General Service category who passes an appropriate test and demonstrates continued proficiency in the use of either two or more official languages, or in one official language and in the language of his duty station if that language is not his mother tongue. Such payment shall be equivalent to an additional step increment and may extend beyond the maximum salary of the grade of the staff member concerned.' and decided that this amendment should be effective as from 1 January 1960

CONSIDERATIONS REGARDING PROVISIONAL MEASURES FOR THE PROTECTION OF INTELLECTUAL PROPERTY RIGHTS IN ROMANIA

Directory of Open Access Journals (Sweden)

Paul-George BUTA

2014-05-01

Full Text Available The article takes a look at provisions in the Code of Civil Procedure dealing with the provisional measures that can be requested by the intellectual property right-holder in case of apparent infringements of his rights. Starting from the goals of such regulation, as provided by Directive 48/2004, the article examines what could be the hurdles imposed by the Romanian legislator (mostly by not providing sufficiently tailored means in respect of intellectual property rights on the right-holder and proposes that, in light of the problems as reflected in the courts' practice, a legislative intervention be undertaken in order to better adapt the means to the purpose envisaged.

The Effect Of A Provisional Sequestration Order - Does It Impose A Limitation To My Right To Be A Member Of Parliament?

Directory of Open Access Journals (Sweden)

Leonie Stander

2015-12-01

Full Text Available The question asked in this article is inspired by the recent case of Mr Julius Malema. Why the matter is so important and has enjoyed so much attention, is the fact that it was widely suggested that a final order of sequestration would affect Mr Malema's political career in that it would not be possible for him to continue to serve as Member of Parliament. The question that immediately comes to the fore is whether the provisional order of sequestration would not already result in such an outcome. As stipulated by the Constitution of the Republic of South Africa, 1996, an unrehabilitated insolvent may not become a member of the National Assembly, National Council of Provinces, or a Provincial Legislator. Do the words "unrehabilitated insolvent" also include a person who is under provisional sequestration? The purpose of this article is to investigate the effect of a provisional order of sequestration and the focus will be on the ability of an insolvent to act as a Member of Parliament. The legal position in the South African law will be compared with the legal position in the United States of America – which is, with regard to the insolvency law, recognized as a very successful, modern, progressive and dynamic legal system. Voluminous changes to the American bankruptcy law system, to adapt to current practical situations and the current economic climate, have been effected as recently as in 2005. Brief reference will also be made to the legal position in the United Kingdom, due to South Africa's historical ties with the UK and the reliance in the past on the English insolvency law and the Bankruptcy Act, 1986.

Job search, hours restrictions, and desired hours of work

NARCIS (Netherlands)

Bloemen, H.G.

2008-01-01

A structural empirical job search model is presented that incorporates the labor supply decision of individuals. The arrival of a job offer is modeled as a random draw from a wage-hours offer distribution. Subjective information is used on desired working hours to identify optimal hours from offered

The association between long work hours and leisure-time physical activity and obesity

Directory of Open Access Journals (Sweden)

Miranda A. Cook

2018-06-01

Full Text Available Obesity affects approximately one-third of all U.S. adults, presenting a large economic and public health burden. Long work hours may be contributing to the rising obesity problem by reducing time for physical activity, particularly for individuals working in sedentary occupations. This study sought to investigate the association between long work hours, leisure-time physical activity (LTPA, and obesity across levels of occupational activity in order to identify potentially vulnerable groups. Cross sectional analysis was performed in 2017 using data from the 2015 Georgia Behavioral Risk Factor Surveillance System and prevalence ratios were estimated across work hour and occupational activity groups. Ability to meet guidelines for LTPA did not differ significantly across work hour categories overall. Those working in low activity occupations were more likely to meet aerobic guidelines for LTPA compared to those in intermediate and high activity occupations (χ2: 19.3; P-value: <0.01. Results of interaction assessment demonstrate that the effects of work hours on obesity risk and meeting aerobic guidelines are significantly different across OA categories, indicating OA to be an effect modifier of the relationship between long work hours and obesity (χ2: 13.33; P-value: <0.001; χ2: 4.42; P-value: <0.05. Employees in intermediate activity occupations working long hours were found to be at the greatest risk for obesity. Further research is required to better understand the mechanisms impacting the relationship between long work hours, domains of physical activity, and obesity risk as well as to identify effective intervention and prevention programs for employees in intermediate activity occupations. Keywords: Physical activity, Obesity, Occupation, Long work hours

Evaluation of the effect of various beverages and food material on the color stability of provisional materials – An in vitro study

Science.gov (United States)

Gupta, Gaurav; Gupta, Tina

2011-01-01

Aim: This study evaluated the color stability of four provisional materials: 1) Poly-methyl methacrylates (DPI); 2) Bis-acryl composite (ProtempTM II – 3M ESPE); 3) Bis-acryl composite (Systemp® c and b – Ivoclar Vivadent) and 4) Light polymerized composite resin (Revotek LC- GC). Materials and Methods: The color and color difference of each specimen after immersion in different staining solutions i.e. 1) tea and artificial saliva, 2) coffee and artificial saliva, 3) Pepsi and artificial saliva, 4) turmeric solution and artificial saliva was measured using reflectance spectrophotometer with CIELAB system before immersion and after immersion at 2, 5 ,7 , 10 and 15 days. Results: Revotek LC- GC (light polymerized composite resin) was found to be the most color stable provisional restorative material followed by Protemp II (Bis-acryl composite), Systemp (Bis-acryl composite) and DPI (Methylmethacrylate resin). Turmeric solution had the maximum staining potential followed by coffee, tea and Pepsi. PMID:22025835

Missing data and the accuracy of magnetic-observatory hour means

Directory of Open Access Journals (Sweden)

J. J. Love

2009-09-01

Full Text Available Analysis is made of the accuracy of magnetic-observatory hourly means constructed from definitive minute data having missing values (gaps. Bootstrap sampling from different data-gap distributions is used to estimate average errors on hourly means as a function of the number of missing data. Absolute and relative error results are calculated for horizontal-intensity, declination, and vertical-component data collected at high, medium, and low magnetic latitudes. For 90% complete coverage (10% missing data, average (RMS absolute errors on hourly means are generally less than errors permitted by Intermagnet for minute data. As a rule of thumb, the average relative error for hourly means with 10% missing minute data is approximately equal to 10% of the hourly standard deviation of the source minute data.

The precautionary principle as a provisional instrument in environmental policy: The Montreal Protocol case study

International Nuclear Information System (INIS)

Jacobs, J. Roger

2014-01-01

Highlights: • I examine whether a policy invoked under the Precautionary Principle can move beyond provisional status. • I review the certainty of conclusions based upon the Global Ozone Research and Monitoring Project. • There is high certainty that anthropogenic ozone depletion has health consequences in polar regions. • Current research focuses on long term projections of risk that perpetuates high uncertainty. • Establishment of a community to generate Assessments acts to perpetuate the period of uncertainty. - Abstract: Environmental studies identify possible threats to the health of the public or the environment when the scientific certainty of risk is low, but the potential cost is high. Governments may respond by invoking the Precautionary Principle, holding that scientific certainty is not required to take actions that reduce possible risk. EU guidelines suggest that precautionary measures remain provisional until sufficient scientific certainty is generated. Here I study the Scientific Assessments produced for the Montreal Protocol, and the scientific community that generates them, and ask whether a long-standing program of scientific investigation and monitoring can generate sufficient scientific certainty to move beyond dependence on the Precautionary Principle. When the Montreal Protocol was ratified, many scientists strongly suspected that anthropogenic substances like chlorofluorocarbons were depleting stratospheric ozone. Although the risk was uncertain, the perceived cost to public health of ozone depletion was high. A quarter century after formulating the Montreal Protocol, science can define the conditions for ozone depletion with great certainty, but uncertainty remains in determining the scale and distribution of the attributable increase in damaging ultra-violet (UV) radiation. Organisations, such as NASA, and scientists that contribute to the Scientific Assessments comprise the community in which the scientific consensus of risk is

Redesign of a fixture mount to be used as an impression coping and a provisional abutment as well

OpenAIRE

Chang, Glenn Hsuan-Chen; Tian, Chen; Hung, Yuen-Siang

2011-01-01

Purpose: An integrated fixture mount/impression coping/ temporary abutment can provide many advantages for immediate loading of dental implants, such as simpler procedure, less chair time, cost reduction, and comfort for the patients. Materials and Methods: A newly designed dental implant fixture mount (DIFMA) can be used as an impression coping for taking an immediate impression. An immediate load provisional prosthesis can then be fabricated shortly after implant placement to immediately lo...

Neighborhood walkability, income, and hour-by-hour physical activity patterns.

Science.gov (United States)

Arvidsson, Daniel; Eriksson, Ulf; Lönn, Sara Larsson; Sundquist, Kristina

2013-04-01

This study aimed to investigate both the mean daily physical activity and the hour-by-hour physical activity patterns across the day using accelerometry and how they are associated with neighborhood walkability and individual income. Moderate physical activity (MPA) was assessed by accelerometry in 2252 adults in the city of Stockholm, Sweden. Neighborhood walkability (residential density, street connectivity, and land use mix) was objectively assessed within 1000m network buffers around the participants' residence and individual income was self-reported. Living in a high walkability neighborhood was associated with more mean daily MPA compared with living in a low walkability neighborhood on weekdays and weekend days. Hour-by-hour analyses showed that this association appeared mainly in the afternoon/early evening during weekdays, whereas it appeared across the middle of the day during weekend days. Individual income was associated with mean daily MPA on weekend days. On weekdays, the hour-by-hour analyses showed that high income was associated with more MPA around noon and in late afternoon/early evening, whereas low income was associated with more MPA at the hours before noon and in the early afternoon. During the weekend, high income was more consistently associated with higher MPA. Hour-by-hour accelerometry physical activity patterns provides a more comprehensive picture of the associations between neighborhood walkability and individual income and physical activity and the variability of these associations across the day.

24-HOUR ARTERIAL STIFFNESS VALUES IN MEN WITH DIFFERENT PHENOTYPES OF CHRONIC OBSTRUCTIVE PULMONARY DISEASE CONCURRENT WITH HYPERTENSION

Directory of Open Access Journals (Sweden)

N. A. Karoli

2015-01-01

Full Text Available Objective: to study the specific features of the daily arterial stiffness (AS profile in men with different phenotypes of chronic obstructive pulmonary disease (COPD concurrent with hypertension. Subjects and methods. The investigation enrolled 78 male patients with COPD and hypertension. The patients were divided according to COPD phenotypes into 2 groups: 1 COPD patients with emphysema; 2 those with bronchitis. The exclusion criteria were less than 40 years and more than 80 years of age; diabetes mellitus; coronary heart disease; vascular diseases; an exacerbation of chronic diseases; bronchial and pulmonary diseases of another etiology. The patients underwent 24-hour blood pressure and AS monitoring, external respiratory function testing: spirography with a short-acting β2-agonist test, a six-minute walk test at baseline and after a hemoglobin oxygen saturation test, and a CAT test. Results. The patients of both groups were observed to have a statistically significant increase in (dP/dtmax as compared to those of the control group (p < 0.05; p < 0.01 in both the daytime and nighttime. In these periods, the COPD patients with emphysema had a higher AIx than those with bronchitis (p < 0.001. There was a statistically significantly (p < 0.001 higher AIx in the nighttime than in the daytime in Groups 1 and 2 patients. Conclusion. The patients with different COPD phenotypes were noted to have impaired arterial elastic properties, circadian AS changes with predominantly nocturnal impaired vascular stiffness. Relationships were found between 24-hour AS values and clinicoanamnestic findings. 

Maintenance of marginal bone support and soft tissue esthetics at immediately provisionalized OsseoSpeed implants placed into extraction sites: 2-year results.

Science.gov (United States)

Noelken, Robert; Neffe, Bettina Anna; Kunkel, Martin; Wagner, Wilfried

2014-02-01

Placement of implants into extraction sockets targets the maintenance of peri-implant hard and soft tissue structures and the support of a natural and esthetic contour. The main advantages of immediate implant insertion in comparison with delayed implant placement protocols are as follows: a reduced treatment time, less number of sessions, and, thus, the less invasive procedure. This study examines the clinical performance (survival rate, marginal bone levels and Pink Esthetic Score [PES]) of OsseoSpeed implants placed into extraction sockets with immediate provisionalization in the anterior maxilla after a follow-up of at least 12 months. Twenty patients received a total number of 37 OsseoSpeed implants which were immediately inserted into extraction sockets with or without facial bone deficiencies of various dimensions. A flapless procedure was applied, and the implants were immediately provisionalized with temporary crowns without occlusal contacts. Facial gaps between implant surface and facial bone or the previous contour of the alveolar process were grafted with autogenous bone chips. Implants in diameters 3.5, 4.0, 4.5, and 5.0 with lengths of 11-17 mm were used in the study. During the course of the study, interproximal marginal bone levels, the thickness of the facial bony wall, implant success rate according to the criteria established by Buser, and the PES were assessed per implant. One patient with three implants did not continue the study after prosthesis delivery, the remaining 34 implants were still in function at the final follow-up (survival rate: 100%). The mean follow-up period was 27 months (range, 12-40 months). Marginal bone height at the level of the implant shoulder averaged -0.1 ± 0.55 mm (range, -1.25 to 1.47 mm) at the final follow-up. The mean PES ratings were 11.3 ± 1.8 (range, 6-14) at the final follow-up. In 78% of the patients, the PES was preserved or even improved. Success rates, marginal bone levels, and esthetic results suggest

New protocol for construction of eyeglasses-supported provisional nasal prosthesis using CAD/CAM techniques.

Science.gov (United States)

Ciocca, Leonardo; Fantini, Massimiliano; De Crescenzio, Francesca; Persiani, Franco; Scotti, Roberto

2010-01-01

A new protocol for making an immediate provisional eyeglasses-supported nasal prosthesis is presented that uses laser scanning, computer-aided design/computer-aided manufacturing procedures, and rapid prototyping techniques, reducing time and costs while increasing the quality of the final product. With this protocol, the eyeglasses were digitized, and the relative position of the nasal prosthesis was planned and evaluated in a virtual environment without any try-in appointment. This innovative method saves time, reduces costs, and restores the patient's aesthetic appearance after a disfiguration caused by ablation of the nasal pyramid better than conventional restoration methods. Moreover, the digital model of the designed nasal epithesis can be used to develop a definitive prosthesis anchored to osseointegrated craniofacial implants.

Pre-prosthetic minor tooth movement with elastic separating ring & provisional restoration modification: case report

Directory of Open Access Journals (Sweden)

Haneol Shin

2012-05-01

Full Text Available Proximal caries or coronal defect in posterior teeth may result in the loss of proximal space and drifting of neighboring teeth, which makes restoration difficult. Inability to restore proper contours and to align tooth axis properly are commonly encountered problems when planning tooth restoration. Moreover, tilted teeth aggravate periodontal tissue breakdown, such as pseudo-pocket, and angular osseous defect. The purpose of this case presentation is to describe a simple technique for inducing minor tooth movement with orthodontic separating ring and provisional restoration modification. This method was used to create crown placement space on mesially tilted molar. This method is easy, simple and efficient technique which could be used in interproximal space gaining in selected situation.

Value management program: performance, quantification, and presentation of imaging value-added actions.

Science.gov (United States)

Patel, Samir

2015-03-01

Health care is in a state of transition, shifting from volume-based success to value-based success. Hospital executives and referring physicians often do not understand the total value a radiology group provides. A template for easy, cost-effective implementation in clinical practice for most radiology groups to demonstrate the value they provide to their clients (patients, physicians, health care executives) has not been well described. A value management program was developed to document all of the value-added activities performed by on-site radiologists, quantify them in terms of time spent on each activity (investment), and present the benefits to internal and external stakeholders (outcomes). The radiology value-added matrix is the platform from which value-added activities are categorized and synthesized into a template for defining investments and outcomes. The value management program was first implemented systemwide in 2013. Across all serviced locations, 9,931.75 hours were invested. An annual executive summary report template demonstrating outcomes is given to clients. The mean and median individual value-added hours per radiologist were 134.52 and 113.33, respectively. If this program were extrapolated to the entire field of radiology, approximately 30,000 radiologists, this would have resulted in 10,641,161 uncompensated value-added hours documented in 2013, with an estimated economic value of $2.21 billion. Copyright © 2015 American College of Radiology. Published by Elsevier Inc. All rights reserved.

24-hour whole-body retention of sup(99m)Tc-diphosphonate

International Nuclear Information System (INIS)

Kapitola, J.

1985-01-01

A new method is described for the examination of bone tissue metabolism; a 24-hour retention of diphosphonate labelled with radioactive sup(99m)Tc (assessed using a whole-body counter or by estimation of the amount of labelled substance excreted in the course of 24 hours via the urine). The values are elevated in primary hyperparathyroidism, osteomalacia, generalized Paget's disease, multiple bone metastases; the values are not uniform in osteoporosis. The method is simple, sensitive and reliable (provided renal function is normal), suited for screening, as part of specialized osteological diagnosis as well as for repeated longitudinal investigations. (author)

Flexibility of working hours in the 24-hour society.

Science.gov (United States)

Costa, G

2006-01-01

The 24-hour Society undergoes an ineluctable process towards a social organisation where time constraints are no more restricting human life. The borders between working and social times are no more fixed and rigidly determined, and the value of working time changes according to the different economic and social effects you may consider. Shift and night work, irregular and flexible working hours, together with new technologies, are the milestone of this epochal passage. What are the advantages and disadvantages for the individual, the companies, and the society? What is the cost/benefit ratio in terms of health and social well-being? Coping properly with this process means avoiding a passive acceptance of it with consequent maladjustments at both individual and social level, but adopting effective preventive and compensative strategies aimed at building up a more sustainable society. Flexible working times now appear to be one of the best ways to cope with the demands of the modern life, but there are different points of view about labour and temporal 'flexibility" between employers and employees. For the former it means a prompt adaptation to market demands and technological innovations; for the latter it is a way to improve working and social life, by decreasing work constraints and increasing control and autonomy. Although it can be easily speculated that individual-based 'flexibility" should improve health and well-being, and especially satisfaction, whereas company-based flexibility" might interfere negatively, the effective consequences on health and well-being have still to be analysed properly.

Lower wages for less hours? A simultaneous wage-hours model for Germany

OpenAIRE

Wolf, Elke

2000-01-01

In this paper the impact of working hours on the gross hourly wage rate of West German women is analyzed. We use a simultaneous wage-hours model which takes into account the participation decision. First, our estimates show that the hourly wage rate is strongly a¤ected by the working hours. In order to avoid any assumptions about the functional form, we estimate linear spline functions. Second, we detect di¤erent wage-hours profiles for specific groups of individuals. Despite these di¤erences...

Osteogenic potential of mesenchymal cells embedded in the provisional matrix after a 6-week healing period in augmented and non-augmented extraction sockets: an immunohistochemical prospective pilot study in humans.

Science.gov (United States)

Heberer, Susanne; Wustlich, Alexander; Lage, Hermann; Nelson, John J; Nelson, Katja

2012-01-01

The aim of the present clinical study was the evaluation of the osteogenic potential of mesenchymal cells embedded in the provisional matrix of non-augmented and with Bio-Oss collagen-augmented human extraction sockets after 6 weeks of healing time. Twenty-five patients with 47 extraction sites participated in the present study. After tooth removal, the extraction sockets were augmented with Bio-Oss collagen or not augmented. At implant placement, bone biopsies of the extraction sockets were obtained. The immunohistochemical analysis of the osteogenic potential of the mesenchymal cells in the provisional matrix was performed using three monoclonal antibodies: core-binding factor α1 (Cbfa1)/runt-related protein (Runx)2, osteonectin (OSN/secreted protein acidic and rich in cyst [SPARC]) and osteocalcin (OC). The statistical analysis was performed using two-factorial analysis for repeated measures, Mann-Whitney U-test and Spearman's rank-order correlation coefficient. Of 47 extraction sockets examined, 17 sockets demonstrated an almost complete ossification. Hence, the provisional matrix of the 30 remaining extraction sockets (21 non-augmented, 9 augmented) was immunohistochemically investigated. No evidence of acute or chronic inflammation was noted in any of the specimens. In the provisional matrix of the non-grafted socket, the median amount of Cbfa1/Runx2-positive cells was 72.3%, of OSN (SPARC) 66.9% and of OC 23.4%, whereas in the grafted sockets the median rate of immunopositive cells staining with Cbfa1/Runx2 was 73.3%, of OSN (SPARC) 61.4% and of OC 20.1%. There was no significant difference in the proportion of positive cells expressed by Cbfa1/Runx2, OSN/SPARC and OC between the grafted and non-grafted socket. Furthermore, the cell density did not correlate to the quantity of stained cells independent of the used proteins. After a 6-week healing period, the provisional matrix was demonstrated to have a high proportion of cells displaying a maturation of

Spiritual well-being and quality of life among Icelanders receiving palliative care: data from Icelandic pilot-testing of a provisional measure of spiritual well-being from the European Organisation for Research and Treatment of Cancer.

Science.gov (United States)

Asgeirsdottir, G H; Sigurdardottir, V; Gunnarsdottir, S; Sigurbjörnsson, E; Traustadottir, R; Kelly, E; Young, T; Vivat, B

2017-03-01

Palliative care focuses on improving quality of life (QoL). This study examined the feasibility of the Icelandic version of a provisional European Organisation for Research and Treatment of Cancer (EORTC) measure of spiritual well-being (SWB), and explored the relationship between SWB and QoL for palliative care patients in Iceland. Instruments from the EORTC were used: the provisional measure of SWB, which was undergoing pilot-testing in Iceland, and the EORTC QLQ C15-PAL. The correlation between scores was examined and descriptive statistics were used. Structured interviews explored feasibility. Thirty persons participated with average age 72 years. Belief in God or a higher power had the mean 3.33 on a 1-4 scale and the mean for overall SWB was 5.73 on a 1-7 scale. The mean score for global health/QoL was 59.4, physical functioning 48.5 and emotional functioning 78.9 on a 0-100 scale. Overall QoL was positively correlated with SWB showing r(30) = 0.386, P = 0.035. The participants found that answering the provisional EORTC QLQ-SWB prompted an emotional response and took the opportunity to discuss the subject. The provisional SWB measure was found relevant for the Icelandic context, and the study indicates that SWB and QoL are closely connected. © 2015 John Wiley & Sons Ltd.

Effect of nursing care hours on the outcomes of Intensive Care assistance.

Directory of Open Access Journals (Sweden)

Tatiana do Altíssimo Nogueira

Full Text Available To correlate the average number of nursing care hours dedicated to Intensive Care Unit (ICU patients with nursing care indicators.Transverse, descriptive study conducted between 2011 and 2013. Data were obtained from the electronic records system and from the nursing staff daily schedule. Generalized Linear Models were used for analysis.A total of 1,717 patients were included in the study. The average NAS (Nursing Activities Score value was 54.87. The average ratio between the number of nursing care hours provided to the patient and the number of nursing care hours required by the patient (hours ratio was 0.87. Analysis of the correlation between nursing care indicators and the hours ratio showed that the indicators phlebitis and ventilator-associated pneumonia significantly correlated with hours ratio; that is, the higher the hours ratio, the lower the incidence of phlebitis and ventilator-associated pneumonia.The number of nursing care hours directly impacts patient outcomes, which makes adjustment of nurse staffing levels essential.

The association between long work hours and leisure-time physical activity and obesity.

Science.gov (United States)

Cook, Miranda A; Gazmararian, Julie

2018-06-01

Obesity affects approximately one-third of all U.S. adults, presenting a large economic and public health burden. Long work hours may be contributing to the rising obesity problem by reducing time for physical activity, particularly for individuals working in sedentary occupations. This study sought to investigate the association between long work hours, leisure-time physical activity (LTPA), and obesity across levels of occupational activity in order to identify potentially vulnerable groups. Cross sectional analysis was performed in 2017 using data from the 2015 Georgia Behavioral Risk Factor Surveillance System and prevalence ratios were estimated across work hour and occupational activity groups. Ability to meet guidelines for LTPA did not differ significantly across work hour categories overall. Those working in low activity occupations were more likely to meet aerobic guidelines for LTPA compared to those in intermediate and high activity occupations (χ 2 : 19.3; P -value: work hours on obesity risk and meeting aerobic guidelines are significantly different across OA categories, indicating OA to be an effect modifier of the relationship between long work hours and obesity (χ 2 : 13.33; P -value: working long hours were found to be at the greatest risk for obesity. Further research is required to better understand the mechanisms impacting the relationship between long work hours, domains of physical activity, and obesity risk as well as to identify effective intervention and prevention programs for employees in intermediate activity occupations.

Upper lower Cambrian (provisional Cambrian Series 2 trilobites from northwestern Gansu Province, China

Directory of Open Access Journals (Sweden)

Jan Bergström†

2014-08-01

Full Text Available Upper lower Cambrian (provisional Cambrian Series 2 trilobites are described from three sections through the Shuangyingshan Formation in the Beishan area, northwestern Gansu Province, China. The trilobite fauna is dominated by eodiscoid and corynexochid trilobites, together representing at least ten genera: Serrodiscus, Tannudiscus, Calodiscus, Pagetides, Kootenia, Edelsteinaspis, Ptarmiganoides?, Politinella, Dinesus and Subeia. Eleven species are described, of which seven are identified with previously described taxa and four described under open nomenclature. The composition of the fauna suggests biogeographic affinity with Siberian rather than Gondwanan trilobite faunas, and the Cambrian Series 2 faunas described herein and from elsewhere in northwestern China seem to be indicative of the marginal areas of the Siberian palaeocontinent. This suggests that the Middle Tianshan–Beishan Terrane may have been located fairly close to Siberia during middle–late Cambrian Epoch 2.

Deep venous thrombophlebitis: detection with 4-hour versus 24-hour platelet scintigraphy

International Nuclear Information System (INIS)

Seabold, J.E.; Conrad, G.R.; Ponto, J.A.; Kimball, D.A.; Frey, E.E.; Ahmed, F.; Coughlan, J.D.; Jensen, K.C.

1987-01-01

Thirty-one nonheparinized patients with suspected deep venous thrombophlebitis (DVT) underwent contrast venography and indium-111 platelet scintigraphy (In-111 PS). Venography permitted identification of acute DVT in 12 of 31 cases (39%). One additional patient was considered to have acute DVT despite nonconclusive venography results. In-111 PS results were positive at 4 hours in nine of 13 cases (69%) and at 24 hours in 12 of 13 cases (92%). Two of four patients with false-negative 4-hour In-111 PS studies had received warfarin. Thus, the sensitivity of 4-hour In-111 PS in patients not receiving anticoagulants was 82%. Venography results were negative for acute DVT in 18 cases, and 4-hour In-111 PS studies were negative or equivocal in each. In-111 PS is an alternative to contrast venography for detecting acute DVT. If 4-hour In-111 PS results are positive, anticoagulation can be initiated. Delayed images are necessary if the 4-hour images are negative or equivocal

Effective diffusion coefficients and porosity values for argillaceous rocks and bentonite: measured and estimated values for the provisional safety analyses for SGT-E2

International Nuclear Information System (INIS)

Van Loon, L.R.

2014-11-01

In Stage 2 of the Sectoral Plan for Deep Geological Repositories, safety analyses have to be performed. Geochemical parameters describing the transport and retardation of radionuclides in the argillaceous rocks considered and in compacted bentonite are required. In the present report, diffusion parameters for all clay host rocks, confining units and compacted bentonite are derived. Diffusion of tritiated water (HTO), "3"6Cl"- and "2"2Na"+ was studied. The measurements gave values for effective diffusion coefficients (D_e) and diffusion accessible porosities. The general observed trend "N"aD_e > "H"T"OD_e > "C"lD_e is in agreement with the expected behaviour of the three species in clay materials: ion exchanging cations show an enhanced mobility due to surface diffusion effects and anions are slowed down due to anion exclusion. Due to the negatively charged clay surfaces, anionic species are repelled from these surfaces resulting in an accessible porosity that is smaller than the total porosity as measured with HTO. The effect of porewater composition on the diffusion of HTO, "3"6Cl"- and "2"2Na"+ in Opalinus Clay was investigated. For ionic strength (IS) values between 0.17 M and 1.07 M, no significant effect on D_e could be observed. In the case of "3"6Cl"-, no effect on the accessible porosity was observed. The anion diffusion accessible porosity equals 50-60 % of the total porosity, independent on the ionic strength of the porewater. The diffusion parameters were measured on sedimentary rocks such as chalk, clay and limestone rocks. All data could be described by one single modified version of Archie's relation (extended Archie's relation). For values of porosity greater than about 0.1, the classical Archie's relation was valid. For values smaller than 0.1, the data deviated from the classical Archie's relation; this can be explained by additional changes of tortuosity with porosity values. At high porosity values (low density rocks), the microfabric of the clay

The 24-hour society between myth and reality.

Science.gov (United States)

Costa, G

2001-12-01

The 24-hour society appears to be an ineluctable process towards a social organisation where time constraints are no more "restricting" the human life. But, what kind of 24-hour society do we need? At what costs? Are they acceptable/sustainable? Shift work, night work, irregular and flexible working hours, together with new technologies, are the milestone of this epochal passage, of which shift workers are builders and victims at the same time. The borders between working and social times are no more fixed and rigidly determined: not only the link between work place and working hours is broken, but also the value of working time changes according to the different economic/productive/social effects it can make. What are the advantages and disadvantages for the individual, the companies, and the society? What is the cost/benefit ratio in terms of physical health; psychological well-being, family and social life? The research on irregular working hours and health shows us what can be the negative consequences of non-human-centered working times organisations. Coping properly with this process means avoiding a passive acceptance of it with consequent maladjustments at both individual and social level, but adopting effective preventive and compensative strategies aimed at building a more sustainable society, at acceptable costs and with the highest possible benefits.

Examining the provisional guidelines for weight gain in twin pregnancies: a retrospective cohort study.

Science.gov (United States)

Lutsiv, Olha; Hulman, Adam; Woolcott, Christy; Beyene, Joseph; Giglia, Lucy; Armson, B Anthony; Dodds, Linda; Neupane, Binod; McDonald, Sarah D

2017-09-29

Weight gain during pregnancy has an important impact on maternal and neonatal health. Unlike the Institute of Medicine (IOM) recommendations for weight gain in singleton pregnancies, those for twin gestations are termed "provisional", as they are based on limited data. The objectives of this study were to determine the neonatal and maternal outcomes associated with gaining weight below, within and above the IOM provisional guidelines on gestational weight gain in twin pregnancies, and additionally, to explore ranges of gestational weight gain among women who delivered twins at the recommended gestational age and birth weight, and those who did not. A retrospective cohort study of women who gave birth to twins at ≥20 weeks gestation, with a birth weight ≥ 500 g was conducted in Nova Scotia, Canada (2003-2014). Our primary outcome of interest was small for gestational age (gain were used to categorize women as gaining below, within, or above guidelines. We performed traditional regression analyses for maternal outcomes, and to account for the correlated nature of the neonatal outcomes in twins, we used generalized estimating equations (GEE). A total of 1482 twins and 741 mothers were included, of whom 27%, 43%, and 30% gained below, within, and above guidelines, respectively. The incidence of small for gestational age in these three groups was 30%, 21%, and 20%, respectively, and relative to gaining within guidelines, the adjusted odds ratios were 1.44 (95% CI 1.01-2.06) for gaining below and 0.92 (95% CI 0.62-1.36) for gaining above. The gestational weight gain in women who delivered twins at 37-42 weeks with average birth weight ≥ 2500 g and those who delivered twins outside of the recommend ranges were comparable to each other and the IOM recommendations. While gestational weight gain below guidelines for twins was associated with some adverse neonatal outcomes, additional research exploring alternate ranges of gestational weight gain in twin

Working Hours and Productivity

OpenAIRE

Collewet, Marion; Sauermann, Jan

2017-01-01

This paper studies the link between working hours and productivity using daily information on working hours and performance of a sample of call centre agents. We exploit variation in the number of hours worked by the same employee across days and weeks due to central scheduling, enabling us to estimate the effect of working hours on productivity. We find that as the number of hours worked increases, the average handling time for a call increases, meaning that agents become less productive. Th...

Comparison of 44-hour and fixed 24-hour ambulatory blood pressure monitoring in dialysis patients.

Science.gov (United States)

Liu, Wenjin; Ye, Hong; Tang, Bing; Sun, Zhiping; Wen, Ping; Wu, Wenhui; Bian, Xueqing; Shen, Xia; Yang, Junwei

2014-01-01

The two most commonly used strategies to evaluate dialysis patients' blood pressure (BP) level are 44-hour and 24-hour ambulatory blood pressure monitoring (ABPM). The objective of this study was to find an appropriate 24-hour period that correlated well with the 44-hour BP level and determine the differences between these strategies. In a group of 51 dialysis patients, the authors performed 44-hour ABPM and extracted data for a fixed 24-hour ABPM. The fixed 24-hour ABPM started at 6 am on the nondialysis day. A strong correlation was found between all parameters of 44-hour and the fixed 24-hour ABPM, with paired sample t test showing only small magnitude changes in a few parameters. Both 24-hour ABPM and 44-hour ABPM were superior to clinic BP in predicting left ventricular mass index (LVMI) by multiple regression analysis. It was found that 44-hour ambulatory arterial stiffness index (AASI), but not 24-hour AASI, had a positive association with LVMI (r=0.328, P=.021). However, after adjustment for 44-hour systolic blood pressure, this association disappeared. Fixed 24-hour ABPM is a good surrogate of 44-hour ABPM to some extent, while 44-hour ABPM can provide more accurate and detailed information. ©2013 Wiley Periodicals, Inc.

Hourly energy management for grid-connected wind-hydrogen systems

International Nuclear Information System (INIS)

Bernal-Agustin, Jose L.; Dufo-Lopez, Rodolfo

2008-01-01

This paper is a complete technical-economic analysis of the hourly energy management of the energy generated in wind-hydrogen systems. Wind power generation depends on the unpredictable nature of the wind. If the wind-power penetration becomes high in the Spanish electrical grid, energy management will be necessary for some wind farms. A method is proposed in this paper to adjust the generation curve to the demand curve, consisting of the generation of hydrogen and storing it in a hydrogen tank during off-peak (low demand) hours, while during the rest of the hours (peak hours, high demand) the stored hydrogen can be used to generate electricity. After revising the results obtained in this paper, for the current values of efficiency of the electricity-hydrogen-electricity conversion (approximately 30%) and due to the high cost of the hydrogen components, for a wind-hydrogen system to be economically viable the price of the sale of the energy generated by the fuel cell would be very high (approximately 171 cEUR/kWh). (author)

Provisional versus elective two-stent strategy for unprotected true left main bifurcation lesions: Insights from a FAILS-2 sub-study.

Science.gov (United States)

Kawamoto, Hiroyoshi; Chieffo, Alaide; D'Ascenzo, Fabrizio; Jabbour, Richard J; Naganuma, Toru; Cerrato, Enrico; Ugo, Fabrizio; Pavani, Marco; Varbella, Ferdinando; Boccuzzi, Giacomo; Pennone, Mauro; Garbo, Roberto; Conrotto, Federico; Biondi-Zoccai, Giuseppe; D'Amico, Maurizio; Moretti, Claudio; Escaned, Javier; Gaita, Fiorenzo; Nakamura, Sunao; Colombo, Antonio

2018-01-01

This study sought to investigate the optimal percutaneous coronary intervention (PCI) strategy for true unprotected left main coronary artery (ULMCA) bifurcations. The FAILS-2 was a retrospective multi-center study including patients with ULMCA disease treated with second-generation drug-eluting stents. Of these, we compared clinical outcomes of a provisional strategy (PS; n=216) versus an elective two-stent strategy (E2S; n=161) for true ULMCA bifurcations. The primary endpoint was the incidence of major adverse cardiac events (MACEs) at 3-years. We further performed propensity-score adjustment for clinical outcomes. There were no significant differences between the groups in terms of patient and lesion characteristics. 9.7% of patients in the PS group crossed over to a provisional two-stent strategy. MACEs were not significantly different between groups (MACE at 3-year; PS 28.1% vs. E2S 28.9%, adjusted p=0.99). The rates of target lesion revascularization (TLR) on the circumflex artery (LCX) were numerically high in the E2S group (LCX-TLR at 3-years; PS 11.8% vs. E2S 16.6%, adjusted p=0.51). E2S was associated with a comparable MACE rate to PS for true ULMCA bifurcations. The rates of LCX-TLR tended to be higher in the E2S group although there was no statistical significance. This study sought to compare the clinical outcomes of a provisional strategy (PS) with an elective two-stent strategy (E2S) for the treatment of true unprotected left main coronary artery bifurcations. 377 Patients (PS 216 vs. E2S 161 patients) were evaluated, and 9.7% in the PS group crossed over to a two-stent strategy. E2S was associated with a similar major adverse cardiac event rate at 3-years when compared to the PS strategy (PS 28.1% vs. E2S 28.9%, p=0.99). However, the left circumflex artery TLR rate at 3-year tended to be higher in the E2S group (PS 11.8% vs. E2S 16.6%, p=0.51). Copyright © 2017 Elsevier B.V. All rights reserved.

Immediate occluding definitive partial fixed prosthesis versus non-occluding provisional restorations - 4-month post-loading results from a pragmatic multicenter randomised controlled trial.

Science.gov (United States)

Heinemann, Friedhelm; Grufferty, Brendan; Papavasiliou, George; Dominiak, Marzena; García, Jaime Jiménez; Trullenque-Eriksson, Anna; Esposito, Marco

2016-01-01

To compare the clinical outcome of dental implants restored with definitive occluding partial fixed prostheses within 1 week, after implant placement with immediate non-occluding provisional restorations, which were to be replaced by definitive prostheses after 4 months. Fifty partially edentulous patients treated with one to three dental implants, at least 8.5 mm long and 4.0 mm wide inserted with a torque of at least 35 Ncm, were randomised in two groups of 25 patients each, to be immediately loaded with partial fixed prostheses. Patients of one group received one definitive screw-retained metal-ceramic prosthesis in occlusion within 1 week after placement. Patients of the other group received one non-occluding provisional acrylic reinforced prosthesis within 24 h after implant placement. Provisional prostheses were replaced after 4 months by definitive ones. The follow-up for all patients was 4-months post-loading. Outcome measures were prosthesis and implant failures, any complications, peri-implant marginal bone level changes, aesthetic evaluation by a clinician, patient satisfaction, chair time and number of visits at the dental office from implant placement to delivery of definitive restorations. No patient dropped out. Two immediately occlusally loaded implants with their related definitive prostheses (8%) failed early (difference in proportions = 0.08; 95% CI: -0.03 to 0.19; P = 0.490). Four complications occurred in the occlusal group versus one in the non-occlusal group; (difference in proportions = 0.12; 95% CI: -0.04 to 0.28; P = 0.349). Four months after loading, patients subjected to non-occlusal loading lost an average of 0.72 mm of peri-implant bone versus 0.99 mm of patients restored with occluding definitive partial fixed prostheses. There were no statistically significant differences for marginal bone level changes between the two groups (mean difference = -0.27 mm; 95% CI: -0.84 to 0.30; P = 0.349). The differences for aesthetic scores showed

Emergency department external fixation for provisional treatment of pilon and unstable ankle fractures

Directory of Open Access Journals (Sweden)

Craig R Lareau

2015-01-01

Full Text Available Unstable ankle fractures and impacted tibial pilon fractures often benefit from provisional external fixation as a temporizing measure prior to definitive fixation. Benefits of external fixation include improved articular alignment, decreased articular impaction, and soft tissue rest. Uniplanar external fixator placement in the Emergency Department (ED ex-fix is a reliable and safe technique for achieving ankle reduction and stability while awaiting definitive fixation. This procedure involves placing transverse proximal tibial and calcaneal traction pins and connecting the pins with two external fixator rods. This technique is particularly useful in austere environments or when the operating room is not immediately available. Additionally, this bedside intervention prevents the patient from requiring general anesthesia and may be a cost-effective strategy for decreasing valuable operating time. The ED ex-fix is an especially valuable procedure in busy trauma centers and during mass casualty events, in which resources may be limited.

The Value of a Checklist for Child Abuse in Out-of-Hours Primary Care: To Screen or Not to Screen.

Directory of Open Access Journals (Sweden)

Maartje Cm Schouten

Full Text Available To assess the diagnostic value of the screening instrument SPUTOVAMO-R2 (checklist, 5 questions for child abuse at Out-of-hours Primary Care locations (OPC, by comparing the test outcome with information from Child Protection Services (CPS. Secondary, to determine whether reducing the length of the checklist compromises diagnostic value.All children (<18 years attending one of the participating OPCs in the region of Utrecht, the Netherlands, in a year time, were included. The checklist is an obligatory field in the electronic patient file. CPS provided data on all checklist positives and a sample of 5500 checklist negatives (dataset. The checklist outcome was compared with a report to CPS in 10 months follow up after the OPC visit.The checklist was filled in for 50671 children; 108 (0.2% checklists were positive. Within the dataset, 61 children were reported to CPS, with emotional neglect as the most frequent type of abuse (32.8%. The positive predictive value (PPV of the checklist for child abuse was 8.3 (95% CI 3.9-15.2. The negative predictive value (NPV was 99.1 (98.8-99.3, with 52 false negatives. When the length of the checklist was reduced to two questions closely related to the medical process (SPUTOVAMO-R3, the PPV was 9.1 (3.7-17.8 and the NPV 99.1 (98.7-99.3. These two questions are on the injury in relation to the history, and the interaction between child and parents.The checklist SPUTOVAMO-R2 has a low detection rate of child abuse within the OPC setting, and a high false positive rate. Therefore, we recommend to use the shortened checklist only as a tool to increase the awareness of child abuse and not as a diagnostic instrument.

One-Hour Postload Hyperglycemia Confers Higher Risk of Hepatic Steatosis to HbA1c-Defined Prediabetic Subjects.

Science.gov (United States)

Fiorentino, Teresa Vanessa; Andreozzi, Francesco; Mannino, Gaia Chiara; Pedace, Elisabetta; Perticone, Maria; Sciacqua, Angela; Perticone, Francesco; Sesti, Giorgio

2016-11-01

Individuals with glycated hemoglobin (HbA1c)-defined prediabetes (HbA1c value of 5.7-6.4%) and 1-hour plasma glucose ≥155 mg/dL during an oral glucose tolerance test have an increased risk of developing type 2 diabetes. To evaluate the degree to which HbA1c-defined prediabetes and 1-hour postload glucose ≥155 mg/dL individually and jointly associate with hepatic steatosis and related biomarkers. A cross-sectional analysis was performed on 1108 White individuals. Ambulatory care. Anthropometric and metabolic characteristics including hepatic steatosis assessed by ultrasonography. Compared with the normal group (HbA1c prediabetic and diabetic individuals exhibit higher values of fasting, 1-hour, and 2-hour postload glucose; fasting and 2-hour postload insulin; triglycerides; uric acid; homeostasis model of assessment for insulin resistance; liver insulin resistance index; liver enzymes; and inflammatory biomarkers; and lower levels of high-density lipoprotein cholesterol and IGF-1. Prediabetic and diabetic subjects have increased risk of hepatic steatosis (1.5- and 2.46-fold, respectively). Stratifying participants according to HbA1c and 1-hour postload glucose, we found that individuals with HbA1c-defined prediabetes and 1-hour postload glucose ≥155 mg/dL have significantly higher risk of hepatic steatosis as compared with individuals with HbA1c-defined prediabetes but 1-hour postload glucose prediabetes and 1-hour postload glucose ≥155 mg/dL exhibit higher values of liver enzymes; fasting, 1-hour, and 2-hour postload glucose; insulin; triglycerides; uric acid; and inflammatory biomarkers; and lower levels of high-density lipoprotein and IGF-1. These data suggest that a value of 1-hour postload glucose ≥155 mg/dL may be helpful to identify a subset of individuals within HbA1c-defined glycemic categories at higher risk of hepatic steatosis.

I-131 attraction by thyroid during first hours following its oral administration

International Nuclear Information System (INIS)

Franquiz, J.M.; Cardenas, R.; Blanco, J.; Garcia, M.

1982-01-01

From radioisotopic investigations used to study thyroid function, that of I-131 attraction results to be one of the most known and used in medical practice. In the authors' laboratory measurement of I-131 activity upon the gland has been for long adopted at 24 hours after administration; however, current needs compel to look for an early time (within the first six hours) for measuring it. In the paper results of I-131 attraction by thyroid in a group with more than 200 patients at 2,4 and 24 hours following its administration are presented in order to assess a 24 hours attraction representativeness by an early attraction. Results demonstrate early attraction is representative of an attraction at 24 hours and with the same diagnostic usefulness. Normal and doubtful ranks for attraction in our medium are determined at 2 and 6 hours, being adopted as proceeding for those cases whose value should be found within doubtful rank, a measurement at 24 hours in order to determine functional condition of the gland. (author)

Duty hours as viewed through a professionalism lens.

Science.gov (United States)

Ginsburg, Shiphra

2014-01-01

Understanding medical professionalism and its evaluation is essential to ensuring that physicians graduate with the requisite knowledge and skills in this domain. It is important to consider the context in which behaviours occur, along with tensions between competing values and the individual’s approach to resolving such conflicts. However, too much emphasis on behaviours can be misleading, as they may not reflect underlying attitudes or professionalism in general. The same behaviour can be viewed and evaluated quite differently, depending on the situation. These concepts are explored and illustrated in this paper in the context of duty hour regulations. The regulation of duty hours creates many conflicts that must be resolved, and yet their resolution is often hidden, especially when compliance with or violation of regulations carries significant consequences. This article challenges attending physicians and the medical education community to reflect on what we value in our trainees and the attributions we make regarding their behaviours. To fully support our trainees’ development as professionals, we must create opportunities to teach them the valuable skills they will need to achieve balance in their lives. [P]rofessionalism has no meaningful existence independent of the interactions that give it form and meaning. There is great folly in thinking otherwise. Hafferty and Levinson (2008)[1] Understanding and evaluating professionalism is essential to excellence in medical education and is mandated by organizations that oversee medical training [2]. Historically, attention has been focused largely on the professionalism of individual students or residents, at least for the purposes of evaluation. Yet there is now a growing appreciation that professionalism can be defined, understood, and evaluated from multiple perspectives [3]. Importantly, context has been recognized as critical to shaping trainees’ behaviours, and hence as important to our understanding of

Operator alertness and performance on 8-hour and 12-hour work shifts

International Nuclear Information System (INIS)

Baker, T.L.; Campbell, S.S.; Dawson, D.; Moore-Ede, M.

1989-01-01

Recently, much attention has been paid to the alertness and performance problems of rotational shiftworkers in the nuclear power industry. Growing awareness of higher rates of human errors and accidents on night shifts and reports of operations personnel falling asleep on the job have contributed to the heightened interest in this subject. The industry is now considering the effects of different shift rotation systems, including evaluation of the most recent of industry trends in shift scheduling-schedules that include 12 hour work shifts. Surveys show that within the past 5 years about 20% of commercially operational nuclear power plants have instituted schedules that use only 12 hour shifts, or schedules using a combination of 8-hour and 12-hour shifts. Many more plants routinely use 12-hour work shifts during plant outages and refueling operations. In response to this growing trend, the NRC has funded research which is a first attempt to compare alertness, operator performance, and sleep-wake patterns in subjects working simulated 8-hour and 12-hour shifts at the Human Alertness Research Center (HARC), located at the Institute of Circadian Physiology in Boston, MA. This paper will describe in greater detail the design of the study, measurement techniques for alertness and sleep, work routine, work task performance measures, and cognitive performance test protocols. It will review the role of circadian factors in human alertness and performance, and discuss previous research findings in this area. It will discuss other variables that are known to influence human alertness in the workplace, such as caffeine, alcohol, and working environment. The physiological basis for shift worker sleep problems will be explained in the context of the ongoing research project at HARC. Finally, the paper presents previous research on shift work and fatigue which may be relevant to a comparison of 8-hour and 12-hour shifts

Documentation to the NCES Common Core of Data Local Education Agency Universe Survey: School Year 2011-12. Provisional Version 1a. NCES 2014-035

Science.gov (United States)

Keaton, Patrick

2014-01-01

This documentation is for the provisional version 1a file of the National Center for Education Statistics' (NCES) Common Core of Data (CCD) Local Education Agency (LEA) Universe Survey for SY 2011-12. It contains a brief description of the data collection, along with information required to understand and access the data file. The CCD is a…

The crossover effect of spouses’ long working hours on depressive symptoms and suicidal ideation

Science.gov (United States)

YOON, Jin-Ha; KANG, Mo-Yeol

2016-01-01

To examine the association between spouses’ weekly working hours (SWWH) and psychological symptoms such as depressive symptom and suicidal ideation. We used data from the fourth and fifth Korean National Health and Nutrition Examination Survey (2007–2012). We collected information about general characteristics, depressive symptoms, suicidal ideation, and working hours. After inclusion and exclusion criteria were applied, a sample of 8,056 house units was used for analysis. A multiple logistic regression was conducted to investigate the association between SWWH and depressive symptoms, as well as suicidal ideation, to estimate the odds ratio (OR). The relationship between SWWH and psychological symptoms were linear in husbands, and J-shaped in wives. ORs for husbands’ depressive symptoms and suicidal ideation increased according to increase in SWWH (p-values for trend were 0.0045 and hours, but increased after SWWH of 40 to 49 hours (all p-values were below 0.01). Similar trends were observed after adjustment for age, obesity, household income, and one’s own weekly working hours, up to 1.33 and 1.57 in husbands, and 1.29 and 1.32 in wives, respectively. SWWH is negatively associated with mental health. PMID:27052574

The crossover effect of spouses' long working hours on depressive symptoms and suicidal ideation.

Science.gov (United States)

Yoon, Jin-Ha; Kang, Mo-Yeol

2016-10-08

To examine the association between spouses' weekly working hours (SWWH) and psychological symptoms such as depressive symptom and suicidal ideation. We used data from the fourth and fifth Korean National Health and Nutrition Examination Survey (2007-2012). We collected information about general characteristics, depressive symptoms, suicidal ideation, and working hours. After inclusion and exclusion criteria were applied, a sample of 8,056 house units was used for analysis. A multiple logistic regression was conducted to investigate the association between SWWH and depressive symptoms, as well as suicidal ideation, to estimate the odds ratio (OR). The relationship between SWWH and psychological symptoms were linear in husbands, and J-shaped in wives. ORs for husbands' depressive symptoms and suicidal ideation increased according to increase in SWWH (p-values for trend were 0.0045 and hours, but increased after SWWH of 40 to 49 hours (all p-values were below 0.01). Similar trends were observed after adjustment for age, obesity, household income, and one's own weekly working hours, up to 1.33 and 1.57 in husbands, and 1.29 and 1.32 in wives, respectively. SWWH is negatively associated with mental health.

Normal thyroid function values in Ethiopians

International Nuclear Information System (INIS)

Wassie, Emnetu; Abdulkadir, Jemal

1990-01-01

Thyroid function values were determined in 56 healthy nongoitrous adult Ethiopians. The mean triiodothyronine (T3) values for 20 males and 36 females were 1.42+-0.32 nmol/L and 1.51+-0.25 nmol/L, and thyroxine (T4) values were 119 22 nmol/L and 116+21 nmol/L respectively. The mean thyrotropin (TSH) values for males and females were identical at 1.86+-0.94 mu/L. Radioactive iodine uptake (RAIU) at 2 hours was 8.6+-4.4% in males and 11.3+-4.3% in females, and at 24 hours 31.7+-11.7% and 38.9+-11.1% respectively. The difference between males and females were significant at both 2 and 24 hours (P<0.05). The ranges for the 3 hormones derived from the mean 2SD values are close to these supplied with the kits but the Ethiopian RAIU values are higher than the values currently applicable in developed countries, probably indicative of the lower level of dietary iodine available to the population here. The values obtained in this study are offered to serve as normal reference for the interpretation of thyroid function results in Ethiopian patients. A strategy for the rational utilization of the available in vitro tests is suggested

More hours, more jobs? The employment effects of longer working hours

OpenAIRE

Martyn Andrews; Hans-Dieter Gerner; Thorsten Schank; Richard Upward

2015-01-01

Increases in standard hours of work have been a contentious policy issue in Germany. Whilst this might directly lead to a substitution of workers by hours, there may also be a positive employment effect due to reduced costs. Moreover, the response of firms may differ between firms that offer overtime and those that do not. For a panel of German plants (2001–2006) drawn from the IAB Establishment Panel, we are the first to analyse the effect of increased standard hours on employment. Using dif...

Long work hours and adiposity among police officers in a US northeast city.

Science.gov (United States)

Gu, Ja K; Charles, Luenda E; Burchfiel, Cecil M; Fekedulegn, Desta; Sarkisian, Khachatur; Andrew, Michael E; Ma, Claudia; Violanti, John M

2012-11-01

To investigate the associations between long work hours and adiposity measures in police officers. Participants included 408 officers from the Buffalo Cardio-Metabolic Occupational Police Stress study who were examined between 2004 and 2009. Total work hours were abstracted from payroll records and questionnaires. Analysis of variance and covariance models were used. Among male officers who worked the midnight shift, mean values of waist circumference and body mass index increased with longer work hours after adjustment for age, physical activity, energy intake, sleep duration, smoking status, police rank, activities after work (eg, child/family care, sports), and household income. Adiposity measures were not associated with work hours among women on any shift. Working longer hours was significantly associated with larger waist circumferences and higher body mass index among male police officers working the midnight shift.

Working hours and productivity

NARCIS (Netherlands)

Collewet, Marion; Sauermann, Jan

2017-01-01

This paper studies the link between working hours and productivity using daily information on working hours and performance of a sample of call centre agents. We exploit variation in the number of hours worked by the same employee across days and weeks due to central scheduling, enabling us to

Comparison of some properties of four provisional restorations resin: Trim, Tempron, Acropars TRII & Duralay (Aria Dent

Directory of Open Access Journals (Sweden)

Monzavi A.

2006-08-01

Full Text Available Background and Aim: Use of provisional restorations is one of the important phases in the treatment of patients who need fixed prosthesis. Some physical properties are required for these materials. The purpose of this study was the comparison of some physical properties of 4 kinds of resins: Trim, Tempron, Duralay (Aria Dent and Acropars TRII. Materials and Methods: In this experimental study, transverse-strength (TS, setting time (ST, polymerization shrinkage (PS and temperature rise (TR during polymerization were tested. In transverse strength test, 5 samples of each resin were made. TS testing was done with an Instron testing machine. ST testing (5 samples in each group was done with Gilmore needle. In PS test, 11 cylindric samples were prepared from each resin and the shrinkage was examined with digital micrometer (up to 24 hours. In TR test, after mixing the powder and liquid of resins (8 samples in each group, the temperature rise was recorded with 10 seconds interval (up to 15 minutes. Data were analyzed with one-way ANOVA and Tukey HSD tests with p<0.05 as the limit of significance. Results: In TS test, all samples of Trim were bent and no fracture was observed, while Tempron and Duralay showed no significant difference. Both Tempron and Duralay revealed high significant difference with Acropars TRII (P <0.01. In ST test, the difference between groups was significant (P<0.01. The lowest ST was observed in Acropars TRII (7 min, and the highest in Tempron (9.53 min. In PS test, significant difference was observed between Trim and Acropars TRII (P<0.01. PS was completed after 120 min in Tempron and Trim groups. However, PS continued to increase in other groups. In TR test, the difference between groups was significant (P<0.05. Duralay showed the highest TR and the lowest was seen in Trim. Conclusion: In this study, Trim showed better properties than other studied groups. Acropars TRII had the lowest strength. The highest temperature rise

29 CFR 778.320 - Hours that would not be hours worked if not paid for.

Science.gov (United States)

2010-07-01

... working hours fall in this category. The agreement of the parties to provide compensation for such hours... regular rate of an employee if the hours are compensated at the same rate as other working hours. The.... Activities of this type include eating meals between working hours. Where it appears from all the pertinent...

Tipología de las bibliotecas argentinas desde el período hispánico hasta 1830: Una primera clasificación provisional Typology of the Argentine Libraries since the Hispanic Period to 1830: A First Provisional Classification

Directory of Open Access Journals (Sweden)

Alejandro E. Parada

2003-12-01

Full Text Available El presente artículo intenta trazar una breve clasificación de los distintos «tipos» de bibliotecas existentes en el actual territorio argentino durante la dominación hispánica hasta el año 1830. La tipología adoptada es, ante todo, una aproximación provisional y ampliamente perfectible. La contribución se dirige, en líneas generales, a quienes se inician en el estudio de la «Historia del libro, de las bibliotecas y de la lectura» en la Argentina. En este sentido, la bibliografía citada intenta suplir la falta de guías de estudio sobre esta temática. Las bibliotecas identificadas son las siguientes: de instituciones o corporaciones religiosas, particulares, pública catedralicia, pública conventual, pública, de sociedades de extranjeros (societarias, de institutos de enseñanza, circulantes (y gabinetes de lectura, y por encargo u ofrecidas por negociantes.This article tries to outline a brief classification of the different types of existing libraries in the present Argentine territory since the Hispanic domination to 1830. The typology adopted is, above all, a provisional approach greatly rectifiable. The contribution is aimed, in general terms, to whom start the study of the history of the books, libraries, and reading in Argentina. In that sense, the quoted bibliography tries to substitute the lack of study guides on the subject. The identified libraries belong to: institutions or religious corporations; private individuals; foreigners societies (i.e.: belonging to a society; educational institutes; and cathedral public libraries; conventual public libraries; public libraries; circulating libraries (and reading rooms; and libraries made to order or offered by businessmen.

Investigation on the hematopoietic effect of functional foods using radiation and preparing the provisional product

Energy Technology Data Exchange (ETDEWEB)

Kim, Sung Ho; Oh, Heon; Lee, Song Eun; Jeong, Yong Woon [Chonnam National University, Kwangju (Korea)

1999-04-01

We performed this study to determine the effect of several oriental prescriptions as energy tonic (Chinese medical concept: Bu-Qi) or blood building (Chinese medical concept: Bu-Xie) decoction and its major ingredients on jejunal crypt survival, endogenous spleen colony formation, and apoptosis in jejunal crypt cells of mice irradiated with high and low dose of gamma-irradiation. For the study of evaluation on the biological stability of irradiated chinese medical prescriptions, we performed the experiment to determine the effect of irradiated (10kGy) or unirradiated Si-Wu-Tang, Bu-Zhong-Yi-Qi-Tang and San-Ling-Bai-Shu-San in irradiated mice. Further studies are needed to characterize better the protective nature of the total extract and its ingredients and for preparing the provisional product. (author). 61 refs., 3 figs., 21 tabs.

A Comparison of 4- and 24-Hour Urine Samples for the Diagnosis of Proteinuria in Pregnancy

Directory of Open Access Journals (Sweden)

Afsane Amirabi

2011-09-01

Full Text Available Background: Preeclampsia is a serious complication of pregnancy, and it is vital to diagnosis the condition as early as possible. Proteinuria is an important symptom of preeclampsia, and repeated urine analysis to screen for the condition is part of the standard antenatal care. The purpose of this study was to determine the correlation between 4- and 24-hour urine total protein values to examine whether the 4-hour urine samples could be used for the diagnosis of proteinuria in hypertensive disorders of pregnancy. Methods: A cross-sectional study was performed on 110 pregnant (after gestational week 20 of pregnancy patients who were hypertensive (blood pressure ≥140/90 mmHg and had proteinuria as defined by positive urinary protein of at least 1+ in dipstick. Patients' urine samples were collected over 24 hours; the first 4 hours were collected separately from the next 20-hours. Patients, who did not collect the 24-hour urine, were excluded from the study. One hundred patients met the criteria, and were included in the study. The urine volume, total protein and creatinine levels of 4- and 24-hours samples were measured. The correlation between 4-hour and 24-hour samples was examined using Pearson correlation test. Results: Of the 100 patients, 42 had no proteinuria, 44 had mild proteinuria, and 14 had severe proteinuria. The urine protein values of 4-hour samples correlated with those of the 24-hours samples for patients with mild and severe forms of the disease (P<0.001, r=0.86. Conclusion: This study showed there was a correlation between 4-hour and 24-hour urine proteins. The finding indicates that a random 4-hour sample might be used for the initial assessment of proteinuria

Working hours

OpenAIRE

Fialová, Lenka

2012-01-01

Working hours The aim of this thesis that I set was a comprehensive analysis of the working hours issue. The main purpose was to summarize this area of labor law while taking into account the Labour Code amendment which came into force on 1st January 2012. The changes in the related legal terms were also included into this thesis because of the mentioned changes. The thesis is composed of three chapters. Chapter One deals briefly with history of Labour Law and regulatory development. Author`s...

Documentation to the NCES Common Core of Data Public Elementary/Secondary School Universe Survey: School Year 2011-12. Provisional Version 1a. NCES 2014-100

Science.gov (United States)

Keaton, Patrick

2013-01-01

The documentation for this provisional version 1a file of the National Center for Education Statistics' (NCES) Common Core of Data (CCD) Public Elementary/Secondary School Universe Survey for SY 2011-12, contains a brief description of the data collection, along with information required to understand and access the data file. The SY 2011-12…

Impact of states' nurse work hour regulations on overtime practices and work hours among registered nurses.

Science.gov (United States)

Bae, Sung-Heui; Yoon, Jangho

2014-10-01

To examine the degree to which states' work hour regulations for nurses-policies regarding mandatory overtime and consecutive work hours-decrease mandatory overtime practice and hours of work among registered nurses. We analyzed a nationally representative sample of registered nurses from the National Sample Survey of Registered Nurses for years 2004 and 2008. We obtained difference-in-differences estimates of the effect of the nurse work hour policies on the likelihood of working mandatory overtime, working more than 40 hours per week, and working more than 60 hours per week for all staff nurses working in hospitals and nursing homes. The mandatory overtime and consecutive work hour regulations were significantly associated with 3.9 percentage-point decreases in the likelihood of working overtime mandatorily and 11.5 percentage-point decreases in the likelihood of working more than 40 hours per week, respectively. State mandatory overtime and consecutive work hour policies are effective in reducing nurse work hours. The consecutive work hour policy appears to be a better regulatory tool for reducing long work hours for nurses. © Health Research and Educational Trust.

Changes of glucose utilization by erythrocytes, lactic acid concentration in the serum and blood cells, and haematocrit value during one hour rest after maximal effort in individuals differing in physical efficiency.

Science.gov (United States)

Tomasik, M

1982-01-01

Glucose utilization by the erythrocytes, lactic acid concentration in the blood and erythrocytes, and haematocrit value were determined before exercise and during one hour rest following maximal exercise in 97 individuals of either sex differing in physical efficiency. In the investigations reported by the author individuals with strikingly high physical fitness performed maximal work one-third greater than that performed by individuals with medium fitness. The serum concentration of lactic acid was in all individuals above the resting value still after 60 minutes of rest. On the other hand, this concentration returned to the normal level in the erythrocytes but only in individuals with strikingly high efficiency. Glucose utilization by the erythrocytes during the restitution period was highest immediately after the exercise in all studied individuals and showed a tendency for more rapid return to resting values again in individuals with highest efficiency. The investigation of very efficient individuals repeated twice demonstrated greater utilization of glucose by the erythrocytes at the time of greater maximal exercise. This was associated with greater lactic acid concentration in the serum and erythrocytes throughout the whole one-hour rest period. The observed facts suggest an active participation of erythrocytes in the process of adaptation of the organism to exercise.

Solubility of radionuclides in a bentonite environment for provisional safety analyses for SGT-E2

International Nuclear Information System (INIS)

Berner, U.

2014-08-01

Within stage 2 of the sectoral plan for deep geological repositories for radioactive waste in Switzerland provisional safety analyses are carried out. In the case of the repository for spent fuel and vitrified high level waste considered, retention mechanisms include the concentration limits of safety relevant elements in the pore water of the buffer material (bentonite). The present work describes the solubility limits of the safety relevant elements Be, C_i_n_o_r_g, Cl, K, Ca, Co, Ni, Se, Sr, Zr, Nb, Mo, Tc, Pd, Ag, Sn, I, Cs, Sm, Eu, Ho, Pb, Po, Ra, Ac, Th, Pa, U, Np, Pu, Am and Cm in the pore water of bentonite after diffusive solution exchange with the host rock Opalinus Clay. The term solubility limit denotes the maximum amount of an element dissolving in the pore solution of the considered chemical reference system. Chemical equilibrium thermodynamics is the classical tool used for quantifying such considerations. For a given solid phase equilibrium thermodynamics predict the amount of substance dissolving in the solution and describe the speciation of the considered element in solution. The principles of chemical equilibrium will also be the primary work hypothesis in the present work. Solubility calculations were performed with the most recent version of GEMS/PSI (GEMS3.2 v.890) using the PSI/Nagra Chemical Thermodynamic Data Base 12/07, which is an update of the former Nagra/PSI Chemical Thermodynamic Data Base 01/01. The database was complemented with datasets from the ThermoChimie v. 7b for elements that were not considered in the mentioned update (Ag, Co, Sm, Ho, Pa, Be), with data from Iupac (Pb) and with data from the literature (Mo). Differing sources for thermodynamic data are noted. Reference values as well as lower and upper guideline values are evaluated. For many formation constants of solids and solutes uncertainties are known and allow conveying lower and upper guideline values. In many cases it is not clear whether the most stable solid is

Young novice drivers and the risky behaviours of parents and friends during the provisional (intermediate) licence phase: a brief report.

Science.gov (United States)

Scott-Parker, Bridie; Watson, Barry; King, Mark J; Hyde, Melissa K

2014-08-01

While there is research indicating that many factors influence the young novice driver's increased risk of road crash injury during the earliest stages of their independent driving, there is a need to further understand the relationship between the perceived risky driving behaviour of parents and friends and the risky behaviour of drivers with a Provisional (intermediate) licence. As part of a larger research project, 378 drivers aged 17-25 years (M=18.22, SD=1.59, 113 males) with a Provisional licence completed an online survey exploring the perceived riskiness of their parents' and friends' driving, and the extent to which they pattern (i.e. base) their driving behaviour on the driving of their parents and friends. Young drivers who reported patterning their driving on their friends, and who reported they perceived their friends to be risky drivers, reported more risky driving. The risky driving behaviour of young male drivers was associated with the perceived riskiness of their fathers' driving, whilst for female drivers the perceived riskiness of their mothers' driving approached significance. The development and application of countermeasures targeting the risky behaviour of same-sex parents appears warranted by the robust research findings. In addition, countermeasures need to encourage young people in general to be non-risky drivers; targeting the negative influence of risky peer groups specifically. Social norms interventions may minimise the influence of potentially-overestimated riskiness. Copyright © 2013 Elsevier Ltd. All rights reserved.

The Productivity Of Working Hours

OpenAIRE

John Pencavel

2013-01-01

Observations on munition workers, most of them women, are organized to examine the relationship between their output and their working hours. The relationship is nonlinear: below an hours threshold, output is proportional to hours; above a threshold, output rises at a decreasing rate as hours increase. Implications of these results for the estimation of labor supply functions are taken up. The findings also link up with current research on the effects of long working hours on accidents and in...

Implant-Supported PMMA Monolithic Full-Arch Rehabilitation with Surgical Computer-Planned Guide and Immediate Provisional: A Case Report with One Year Follow-Up

Directory of Open Access Journals (Sweden)

Vincenzo Luca Zizzari

2018-01-01

Full Text Available The aim of this case report is to describe the surgical and prosthetic procedures to achieve maxillary and mandibular implant-supported PMMA monolithic full-arch rehabilitation (PMFR with surgical computer-planned guide and immediate provisional. In such cases, the correct planning of dental implants’ position, length, and diameter and the prosthetic phases via computer-aided design are very important to achieve good aesthetic and functional long-lasting results.

Implant-Supported PMMA Monolithic Full-Arch Rehabilitation with Surgical Computer-Planned Guide and Immediate Provisional: A Case Report with One Year Follow-Up

OpenAIRE

Zizzari, Vincenzo Luca; Tacconelli, Gianmarco

2018-01-01

The aim of this case report is to describe the surgical and prosthetic procedures to achieve maxillary and mandibular implant-supported PMMA monolithic full-arch rehabilitation (PMFR) with surgical computer-planned guide and immediate provisional. In such cases, the correct planning of dental implants’ position, length, and diameter and the prosthetic phases via computer-aided design are very important to achieve good aesthetic and functional long-lasting results.

Work shift duration: a review comparing eight hour and 12 hour shift systems.

Science.gov (United States)

Smith, L; Folkard, S; Tucker, P; Macdonald, I

1998-04-01

Shiftwork is now a major feature of working life across a broad range of industries. The features of the shift systems operated can impact on the wellbeing, performance, and sleep of shiftworkers. This paper reviews the current state of knowledge on one major characteristic of shift rotas-namely, shift duration. Evidence comparing the relative effects of eight hour and 12 hour shifts on fatigue and job performance, safety, sleep, and physical and psychological health are considered. At the organisational level, factors such as the mode of system implementation, attitudes towards shift rotas, sickness absence and turnover, overtime, and moonlighting are discussed. Manual and electronic searches of the shiftwork research literature were conducted to obtain information on comparisons between eight hour and 12 hour shifts. The research findings are largely equivocal. The bulk of the evidence suggests few differences between eight and 12 hour shifts in the way they affect people. There may even be advantages to 12 hour shifts in terms of lower stress levels, better physical and psychological wellbeing, improved durations and quality of off duty sleep as well as improvements in family relations. On the negative side, the main concerns are fatigue and safety. It is noted that a 12 hour shift does not equate with being active for only 12 hours. There can be considerable extension of the person's time awake either side of the shift. However, the effects of longer term exposure to extended work days have been relatively uncharted in any systematic way. Longitudinal comparative research into the chronic impact of the compressed working week is needed.

The Agency's Safeguards System (1965, as provisionally extended in 1966 and 1968); Sistema de Salvaguardias del Organismo (1965, ampliado provisionalmente en 1966 y 1968)

Energy Technology Data Exchange (ETDEWEB)

NONE

1968-09-24

The Agency's safeguards system, as approved by the Board of Governors in 1965, and provisionally extended in 1966, is set forth in this document for the Information of all Members [Spanish] En el presente documento se reproduce, para informacion de todos los Estados Miembros, el Sistema de salvaguardias del Organismo aprobado por la Junta de Gobernadores en 1965 y ampliado provisionalmente en 1966 y 1968.

Fixed Costs and Hours Constraints

Science.gov (United States)

Johnson, William R.

2011-01-01

Hours constraints are typically identified by worker responses to questions asking whether they would prefer a job with more hours and more pay or fewer hours and less pay. Because jobs with different hours but the same rate of pay may be infeasible when there are fixed costs of employment or mandatory overtime premia, the constraint in those…

Provisional English Translation by the IAEA of Notification Faxes Sent by the Fukushima Daiichi NPP Site Superintendent to Off-Site Officials on 11 March 2011. Annex I of Technical Volume 3

International Nuclear Information System (INIS)

2015-01-01

This annex contains a provisional English translation of the faxes sent by the Fukushima Daiichi NPP Site Superintendent to METI, the Governor of Fukushima Prefecture and the Mayors of Okuma and Futaba on 11 March 2011

CERN restaurants: opening hours during summer

CERN Document Server

2016-01-01

In the summer, the three CERN restaurants remain open during their usual hours. On Monday 1st August and Thursday 8 September, the Restaurant 1 will be open from 7:00 a.m. to 10:00 p.m.   The satellites will be open as follows: Building 6: normal hours Building 13: normal hours Building 30: normal hours Building 40: closing at 4:30 p.m. instead of 5:00 pm Building 54: normal hours in July, closed in August Building 864: normal hours Building 865: normal hours Building 774: normal hours

Effect of travoprost on 24-hour intraocular pressure in normal tension glaucoma

Directory of Open Access Journals (Sweden)

Yuya Nomura

2010-07-01

Full Text Available Yuya Nomura1, Shunsuke Nakakura2, Mitsuyasu Moriwaki1, Yasuhiro Takahashi1, Kunihiko Shiraki11Department of Ophthalmology and Visual Sciences, Graduate School of Medicine, Osaka City University, Japan; 2Department of Ophthalmology, Saiseikai Gose Hospital, JapanPurpose: The effect of travoprost 0.004% on 24-hour intraocular pressure (IOP was examined in patients with normal tension glaucoma (NTG.Subjects and methods: This study included 17 patients with newly diagnosed unilateral NTG. IOP was measured at three-hour intervals over 24 hours by Goldman applanation tonometer in patients taking topical travoprost 0.004% and was compared retrospectively with 24-hour IOP data in untreated eyes.Results: IOP values were significantly reduced at individual time points after treatment (P < 0.01. Mean 24-hour IOP, maximum 24-hour IOP, minimum 24-hour IOP, and 24-hour IOP fluctuations at baseline (mean ± SD were 12.9 ± 2.2 mmHg, 15.4 ± 2.7 mmHg, 10.5 ± 2.2 mmHg, and 4.9 ± 1.2 mmHg, respectively, and were significantly reduced to 10.3 ± 2.0 mmHg, 12.4 ± 2.5 mmHg, 8.5 ± 1.9 mmHg (all P < 0.001, and 3.9 ± 1.5 mmHg (P < 0.05, respectively, after treatment. The rate of IOP reduction greater than 20% was 58.8% (10 eyes for maximum 24-hour IOP and 53.0% (nine eyes for mean 24-hour IOP.Conclusion: Travoprost reduced IOP throughout the 24-hour study period, with over half of the eyes examined showing IOP reduction exceeding 20%.Keywords: 24-hour intraocular pressure, fluctuation, normal tension glaucoma, travoprost, Travatan Z

Surface Weather Observations Hourly

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Standard hourly observations taken at Weather Bureau/National Weather Service offices and airports throughout the United States. Hourly observations began during the...

Long Working Hours and Work-related Cerebro-cardiovascular Disease in Korea

Science.gov (United States)

CHUNG, Yun Kyung; KWON, Young-jun

2013-01-01

The aim of the present study was to determine a good discriminatory cutoff for long working hours as a surrogate of chronic overload at work, which is associated with the approval of workers’ compensation claims for work-related cerebro-cardiovascular disease (WR-CVD) in Korea. We evaluated weekly working hours for four weeks prior to the onset of disease for all manufacturing industry claimants (N=319) of WR-CVD in 2010. The discrimination of long working hours in predicting approval of worker’s compensation pertaining to WR-CVD was compared across cases. The cutoff was calculated with sensitivity, specificity, and the area under the curve with 95% CI using the receiver operating curve (ROC) method. The cutoff point was thus calculated to be 60.75 h (AUC=0.89, 95% CI [0.84–0.93]), showing a sensitivity value of 65% and specificity of 94%. This is the first study to report that long working hours could be a predictor with good discrimination and high specificity of approval of WR-CVD cases. In Korea, long working hours and widespread chronic overload at work are recognized as a social problem. Our study results suggest an appropriate cutoff for working hours as an indicator of chronic overload for the purpose of approving claims of WR-CVD. Furthermore, these results could contribute to improving the consistency of evaluation. PMID:23892901

Long working hours and work-related cerebro-cardiovascular disease in Korea.

Science.gov (United States)

Chung, Yun Kyung; Kwon, Young-jun

2013-01-01

The aim of the present study was to determine a good discriminatory cutoff for long working hours as a surrogate of chronic overload at work, which is associated with the approval of workers' compensation claims for work-related cerebro-cardiovascular disease (WR-CVD) in Korea. We evaluated weekly working hours for four weeks prior to the onset of disease for all manufacturing industry claimants (N=319) of WR-CVD in 2010. The discrimination of long working hours in predicting approval of worker's compensation pertaining to WR-CVD was compared across cases. The cutoff was calculated with sensitivity, specificity, and the area under the curve with 95% CI using the receiver operating curve (ROC) method. The cutoff point was thus calculated to be 60.75 h (AUC=0.89, 95% CI [0.84-0.93]), showing a sensitivity value of 65% and specificity of 94%. This is the first study to report that long working hours could be a predictor with good discrimination and high specificity of approval of WR-CVD cases. In Korea, long working hours and widespread chronic overload at work are recognized as a social problem. Our study results suggest an appropriate cutoff for working hours as an indicator of chronic overload for the purpose of approving claims of WR-CVD. Furthermore, these results could contribute to improving the consistency of evaluation.

Assessing the nutritive value of waterweeds to livestock production ...

African Journals Online (AJOL)

Paspalum scrobiculatum and Dicksonia antartica recorded the least value at 24 and 48 hours incubation while Nymphaea lotus and Dicksonia antartica had the least value at 72 and 96 hours incubation. Heteranthera callifolia had the highest organic matter digestibility (%) while the least short chain fatty acid (μmol) was ...

Validation of an hourly resolved global aerosol model in answer to solar electricity generation information needs

Directory of Open Access Journals (Sweden)

M. Schroedter-Homscheidt

2013-04-01

Full Text Available Solar energy applications need global aerosol optical depth (AOD information to derive historic surface solar irradiance databases from geostationary meteorological satellites reaching back to the 1980's. This paper validates the MATCH/DLR model originating in the climate community against AERONET ground measurements. Hourly or daily mean AOD model output is evaluated individually for all stations in Europe, Africa and the Middle East – an area highly interesting for solar energy applications being partly dominated by high aerosol loads. Overall, a bias of 0.02 and a root-mean-square error (RMSE of 0.23 are found for daily mean AOD values, while the RMSE increases to 0.28 for hourly mean AOD values. Large differences between various regions and stations are found providing a feedback loop for the aerosol modelling community. The difference in using daily means versus hourly resolved modelling with respect to hourly resolved observations is evaluated. Nowadays state-of-the-art in solar resource assessment relies on monthly turbidity or AOD climatologies while at least hourly resolved irradiance time series are needed by the solar sector. Therefore, the contribution of higher temporally modelled AOD is evaluated.

Hacia un inventario provisional de las tendencias en Bibliotecología y Ciencia de la Información = Towards a provisional inventory of trends in Library and Information Science.

Directory of Open Access Journals (Sweden)

Alejandro E. Parada

2015-12-01

Full Text Available Este trabajo se presentó como un documento de debate y reflexión en las 1º Jornadas Nacionales de Docentes e Investigadores Universitarios en Ciencia de la Información (DUCI, llevadas a cabo el 3 y 4 de septiembre de 2015 en la Biblioteca Nacional Mariano Moreno. En el texto se señalan, en forma preliminar y provisional, algunas de las perspectivas más importantes de la Bibliotecología y Ciencia de la Información (BCI. En este contexto se citan las siguientes: la crisis de la denominación propia de la identidad, el papel del liderazgo de la profesión en la Web 2.0, el tópico de la cogestión entre los bibliotecarios y los usuarios, las potencialidades de autorrepresentación y deliberación de las bibliotecas, las dimensiones tecnológicas, la construcción de la lingüística profesional, la importancia del análisis de dominio en la web semántica y sus relaciones con el lenguaje, la tendencia a la inclusión, la gestación de los portales de acceso abierto, el paradigma de la diversidad polimórfica, la dimensión teórica y de índole filosófica, entre otras muchas. Finalmente, se señala la trascendencia de la BCI como una disciplina de la pluralidad y diversidad virtual, y como un campo en estado de apertura para que los ciudadanos transformen la información en conocimiento = This work was presented as a document for debate and reflection in the 1º Jornadas Nacionales de Docentes e Investigadores Universitarios en Ciencia de la Información (DUCI held on 3rd and 4th September 2015 at the Biblioteca Nacional Mariano Moreno. The text indicates, in preliminary and provisional way, some of the most important perspectives of Library and Information Science. In this context, the following perspectives are mentioned: The crisis of the identity denomination, the role of leadership of the profession in the Web 2.0, the topic of co-management between librarians and users, the potential of self-representation and deliberation in

The generation of hourly diffuse irradiation: A model from the analysis of the fluctuation of global irradiance series

International Nuclear Information System (INIS)

Posadillo, R.; Lopez Luque, R.

2010-01-01

An analysis of models for the estimation of hourly diffuse irradiation based on the interrelations between the hourly diffuse fraction k d and the hourly clearness index k t , has concluded that k t is not a sufficient variable for parametrizing the effect of clouds on diffuse irradiation. A detailed study of the dispersion recorded by this diffuse component for a specific clearness index under partly cloudy sky conditions has led to analyzing how the variability in the instantaneous clearness index influences this dispersion. The data sets correspond to 10 years of hourly and instantaneous value records of global and diffuse radiation collected in Cordoba, Spain. In addition to the inclusion of the sine of solar elevation as a variable into the k d -k t correlations, this model propose the inclusion of others parameters related to the variability in the normalized clearness index within an hour and with the fluctuations presented by the time series of the instantaneous values of that index. Also presented is the implementation of an algorithm permitting both the determination of the hourly diffuse irradiation and the discrimination between the different sky conditions in those situations known by the designation partly cloudy sky.

The Agency's Safeguards System (1965, as provisionally extended in 1966 and 1968); Le Systeme de Garanties de l'Agence (1965, provisoirement etendu en 1966 et 1968)

Energy Technology Data Exchange (ETDEWEB)

NONE

1968-09-24

The Agency's safeguards system, as approved by the Board of Governors in 1965, and provisionally extended in 1966, is set forth in this document for the Information of all Members [French] Le Systeme de garanties de l'Agence, approuve par le Conseil des gouverneurs en 1965 et provisoirement etendu en 1966 et 1968, est reproduit dans le present document pour l'information de tous les Membres.

Analysis of Office/Laboratory Staying Hour and Home Working Hour of Japanese Scientists and Engineers

Science.gov (United States)

Ejiri, A.

The second questionnaire for scientists and engineers was carried out in 2007, and status of Japanese scientists and engineers were analyzed and reported. A part of the data was reanalyzed from the viewpoint of work life balance. In particular, office/laboratory staying hour and home working hour were analyzed and dependences on various factors were investigated. It was found that these hours depend on gender, marital status, number of child, employment status and age. In addition, the total hours tend to be kept constant regardless of various factors.

Evaluation of geological documents available for provisional safety analyses of potential sites for nuclear waste repositories - Are additional geological investigations needed?

International Nuclear Information System (INIS)

2010-10-01

The procedure for selecting repository sites for all categories of radioactive waste in Switzerland is defined in the conceptual part of the Sectoral Plan for Deep Geological Repositories, which foresees a selection of sites in three stages. In Stage I, Nagra proposed geological siting regions based on criteria relating to safety and engineering feasibility. The Swiss Government (the Federal Council) is expected to decide on the siting proposals in 2011. The objective of Stage 2 is to prepare proposals for the location of the surface facilities within the planning perimeters defined by the Federal Council in its decision on Stage 1 and to identify potential sites. Nagra also has to carry out a provisional safety analysis for each site and a safety-based comparison of the sites. Based on this, and taking into account the results of the socio-economic-ecological impact studies, Nagra then has to propose at least two sites for each repository type to be carried through to Stage 3. The proposed sites will then be investigated in more detail in Stage 3 to ensure that the selection of the sites for the General Licence Applications is well founded. In order to realise the objectives of the upcoming Stage 2, the state of knowledge of the geological conditions at the sites has to be sufficient to perform the provisional safety analyses. Therefore, in preparation for Stage 2, the conceptual part of the Sectoral Plan requires Nagra to clarify the need for additional investigations aimed at providing input for the provisional safety analyses. The purpose of the present report is to document Nagra's technical-scientific assessment of this need. The focus is on evaluating the geological information based on processes and parameters that are relevant for safety and engineering feasibility. In evaluating the state of knowledge the key question is whether additional information could lead to a different decision regarding the selection of the sites to be carried through to Stage 3

The Persistence of Long Work Hours

OpenAIRE

Robert Drago; David Black; Mark Wooden

2005-01-01

Previous research hypothesizes that long working hours are related to consumerism, the ideal worker norm, high levels of human capital, and a high cost-of-job-loss. The authors test these hypotheses using panel data on working hours for an Australian sample of full-time employed workers. Analyses include a static cross-sectional model and a persistence model for long hours over time. The results suggest that long hours (50 or more hours in a usual week) are often persistent, and provide stron...

La Evoluci?n de la percepci?n del rol del IRA Provisional a partir de est?mulos generados por el Sistema Internacional

OpenAIRE

Cort?s Rojas, Mar?a Alejandra

2017-01-01

Esta investigaci?n tiene como objetivo explicar los cambios en la forma de lucha, tanto armada como pol?tica, del IRA Provisional a partir del surgimiento de movimientos por los derechos civiles en Estados Unidos, el fin de la Guerra Fr?a y la deslegitimaci?n de los movimientos anti-imperialistas, el auge econ?mico irland?s y la expansi?n de los valores de la Uni?n Europea. Estos cambios pueden verse explicados por la forma en la que el grupo cambia su percepci?n del rol que desarrolla dentro...

Soft Tissue Augmentation Techniques in Implants Placed and Provisionalized Immediately: A Systematic Review

Directory of Open Access Journals (Sweden)

Rosa Rojo

2016-01-01

Full Text Available The aim of this study was to evaluate the effectiveness of techniques for soft tissue augmentation in the placement of immediate implants with and without provisionalization and to assess the quality of the reports in the literature. Randomized clinical trials, prospective clinical trials, and case series were included in this review. Clinical questions were formulated and organised according to the PICOS strategy. An electronic search was performed in PubMed, Cochrane Central Register of Controlled Trials, Scopus, and ISI Web up until June 2016. Interexaminer agreement on eligibility (k=0.842; p=0.103 and quality (k=0.933; p<0.001 was high. Methodological approaches were assessed using criteria based on design related forms designed by the Dutch Cochrane Collaboration. Finally, 14 papers were identified. In two studies, the implant survival was 90%; for the rest of the studies it was 100%. All studies reported favourable aesthetic, biological, and radiographic outcomes. Surgical and biomechanical complications of this technique were not relevant. This technique effectively compensates for the expected loss of volume of the oral soft tissues and maintains high success rates with good aesthetic results over time.

Provisional Tic Disorder: What to tell parents when their child first starts ticcing.

Science.gov (United States)

Black, Kevin J; Black, Elizabeth Rose; Greene, Deanna J; Schlaggar, Bradley L

2016-01-01

The child with recent onset of tics is a common patient in a pediatrics or child neurology practice. If the child's first tic was less than a year in the past, the diagnosis is usually Provisional Tic Disorder (PTD). Published reviews by experts reveal substantial consensus on prognosis in this situation: the tics will almost always disappear in a few months, having remained mild while they lasted. Surprisingly, however, the sparse existing data may not support these opinions. PTD may have just as much importance for science as for clinical care. It provides an opportunity to prospectively observe the spontaneous remission of tics. Such prospective studies may aid identification of genes or biomarkers specifically associated with remission rather than onset of tics. A better understanding of tic remission may also suggest novel treatment strategies for Tourette syndrome, or may lead to secondary prevention of tic disorders. This review summarizes the limited existing data on the epidemiology, phenomenology, and outcome of PTD, highlights areas in which prospective study is sorely needed, and proposes that tic disorders may completely remit much less often than is generally believed.

Provisional Tic Disorder: What to tell parents when their child first starts ticcing

Science.gov (United States)

Black, Kevin J; Black, Elizabeth Rose; Greene, Deanna J.; Schlaggar, Bradley L.

2016-01-01

The child with recent onset of tics is a common patient in a pediatrics or child neurology practice. If the child’s first tic was less than a year in the past, the diagnosis is usually Provisional Tic Disorder (PTD). Published reviews by experts reveal substantial consensus on prognosis in this situation: the tics will almost always disappear in a few months, having remained mild while they lasted. Surprisingly, however, the sparse existing data may not support these opinions. PTD may have just as much importance for science as for clinical care. It provides an opportunity to prospectively observe the spontaneous remission of tics. Such prospective studies may aid identification of genes or biomarkers specifically associated with remission rather than onset of tics. A better understanding of tic remission may also suggest novel treatment strategies for Tourette syndrome, or may lead to secondary prevention of tic disorders. This review summarizes the limited existing data on the epidemiology, phenomenology, and outcome of PTD, highlights areas in which prospective study is sorely needed, and proposes that tic disorders may completely remit much less often than is generally believed. PMID:27158458

En Route Descent Advisor Multi-Sector Planning Using Active and Provisional Controller Plans

Science.gov (United States)

Vivona, Robert; Green, Steven

2003-01-01

As decision support tools are developed to support controllers in complex air traffic control environments, new approaches to maintaining situation awareness and managing traffic planning must be developed to handle the ever-increasing amounts of alerting and advisory data. Within high-density metering and other environments where flight path changes are the rule, not the exception, and where interactions between these changes are required, current trial planning approaches are limited by potential increases in workload. The Enroute Descent Advisor (EDA) is a set of decision support tool capabilities for managing high-density en route traffic subject to metering restrictions. The EDA system s novel approach builds aircraft plans from combinations of user intent data and builds controller plans from combinations of aircraft plans to effectively maintain situation awareness during traffic planning. By maintaining both active (current) and provisional (proposed) controller plans, EDA supports controllers in coordinated traffic planning both within and between sectors. Ultimately, EDA s multi-sector planning approach will facilitate a transition from current sector-oriented operations to a new trajectory-oriented paradigm, enabling new levels of efficiency and collaboration in air traffic control.

10 CFR 26.205 - Work hours.

Science.gov (United States)

2010-01-01

... an 8-hour break between successive work periods when a break of less than 10 hours is necessary to...) Individuals who are working 8-hour shift schedules shall have at least 1 day off per week, averaged over the shift cycle; (ii) Individuals who are working 10-hour shift schedules shall have at least 2 days off per...

Short-Term Reproducibility of Twenty-Four-Hour Intraocular Pressure Curves in Untreated Patients with Primary Open-Angle Glaucoma and Ocular Hypertension.

Directory of Open Access Journals (Sweden)

Shuo Xu

Full Text Available To assess the short-term day-to-day reproducibility of 24-hour intraocular pressure (IOP curves in various respects in untreated primary open-angle glaucoma (POAG and ocular hypertension (OHT patients.47 subjects with POAG and 34 subjects with OHT underwent IOP measurements every 2 hours in both eyes for consecutive 48 hours by a non-contact tonometer (NCT. IOP values at each time point were recorded. Mean IOP, peak IOP, time difference of peak IOP between two days and IOP fluctuation were also calculated. Intraclass correlation coefficients (ICCs and Bland-Altman plots were used to evaluate reproducibility.ICCs of the entire IOP values for a complete 24-hour curve were 0.577 and 0.561 in POAG and OHT patients, respectively. ICCs of IOP values at different time points ranged from 0.384 (10am to 0.686 (4am in POAG patients and from 0.347 (6am to 0.760 (4am in OHT patients. ICCs of mean IOP, peak IOP and IOP fluctuation were respectively 0.832, 0.704, 0.367 in POAG patients and 0.867, 0.816 0.633 in OHT patients. Only 37.23% and 35.29% of the peak IOP time points appeared within the time difference of 2 hours in POAG and OHT patients, respectively, while 53.19% and 48.53% appeared within 4 hours in POAG and OHT patients, respectively.A 24-hour IOP curve in a single day is not highly reproducible in short-term and has limited use for evaluating individual IOP condition. Mean IOP and peak IOP for a 24-hour IOP curve are useful parameters in clinical follow-up, while IOP value at a certain time point, IOP fluctuation and peak IOP time point should be interpreted with caution.

Using probabilistic finite automata to simulate hourly series of global radiation

Energy Technology Data Exchange (ETDEWEB)

Mora-Lopez, L. [Universidad de Malaga (Spain). Dpto. Lenguajes y Computacion; Sidrach-de-Cardona, M. [Universidad de Malaga (Spain). Dpto. Fisica Aplicada II

2003-03-01

A model to generate synthetic series of hourly exposure of global radiation is proposed. This model has been constructed using a machine learning approach. It is based on the use of a subclass of probabilistic finite automata which can be used for variable-order Markov processes. This model allows us to represent the different relationships and the representative information observed in the hourly series of global radiation; the variable-order Markov process can be used as a natural way to represent different types of days, and to take into account the ''variable memory'' of cloudiness. A method to generate new series of hourly global radiation, which incorporates the randomness observed in recorded series, is also proposed. As input data this method only uses the mean monthly value of the daily solar global radiation. We examine if the recorded and simulated series are similar. It can be concluded that both series have the same statistical properties. (author)

Three Mile Island - The hour-by-hour account of what really happened

International Nuclear Information System (INIS)

Stephens, M.

1980-01-01

An hour-by-hour account is given of the progression of events leading up to and during the accident at the Three Mile Island Unit 2 reactor. The emergency procedures followed, the evacuation of local residents and the decisions taken as the possibility of a meltdown became apparent are recorded in detail together with aspects of the media coverage and the problems of communication. (U.K.)

Instrucción provisional para el empleo de puntos de soldadura eléctrica por resistencia en las construcciones de acero

Directory of Open Access Journals (Sweden)

Batanero, J.

1963-06-01

Full Text Available As an initial measure to generalise spot welding in the field of metallic structures, the Deutsche Ausschuss fur Stahlbau has issued a provisional specification, of which a full translation is given in this paper. The Specification includes a number of rules, as well as comments and recommendations on the method of establishing the aptitude of a given firm, or a workshop, to practise this spot welding technique. The various chapters of these Specifications give an account of the fundamental calculation principles and the best practise that should be followed in this type of welding. Advise is also offered on the initial care to be taken in applying these principles and specifications in actual practice. The comments that follow serve to clarify and explain the reasons which underlie the various conditions specified in this text. Finally, the recommendations on the method of establishing the aptitude of given workshops to undertake spot welding work are based on the following principle: the construction of structures with spot welded joints can only be entrusted to people who have attained a certain standard of skill, precisely because these structures are meant to be load bearing, and their real strength cannot be checked in practise, a posteriori, except by means of destruction tests. The full text of these Provisional Specifications will be given in three consecutive numbers of the magazine.La soldadura por resistencia es un medio de unión que, en ocasiones, puede resultar muy cómodo y económico. En las estructuras metálicas puras se ha venido empleando poco hasta ahora, aunque su utilización estaba bastante difundida en el empalme a tope de redondos, formación de parrillas de losas y tuberías, etc., con destino a las estructuras de hormigón. Sin embargo, las experiencias realizadas en los últimos años han demostrado que los puntos de soldadura por resistencia pueden constituir medios de unión que, bajo ciertas condiciones

Systematic screening of child abuse in out-of-hours primary care

NARCIS (Netherlands)

Schouten, MCM

2017-01-01

Child abuse is a serious global health problem. This thesis focused on – improving – the detection of child abuse in the out-of-hours primary care (OOH-PC). The main aim was to assess the diagnostic value of the screening instrument SPUTOVAMO-R2 for child abuse. We found that the detection rate of

24-Hour Blood Pressure Variability Assessed by Average Real Variability: A Systematic Review and Meta-Analysis.

Science.gov (United States)

Mena, Luis J; Felix, Vanessa G; Melgarejo, Jesus D; Maestre, Gladys E

2017-10-19

Although 24-hour blood pressure (BP) variability (BPV) is predictive of cardiovascular outcomes independent of absolute BP levels, it is not regularly assessed in clinical practice. One possible limitation to routine BPV assessment is the lack of standardized methods for accurately estimating 24-hour BPV. We conducted a systematic review to assess the predictive power of reported BPV indexes to address appropriate quantification of 24-hour BPV, including the average real variability (ARV) index. Studies chosen for review were those that presented data for 24-hour BPV in adults from meta-analysis, longitudinal or cross-sectional design, and examined BPV in terms of the following issues: (1) methods used to calculate and evaluate ARV; (2) assessment of 24-hour BPV determined using noninvasive ambulatory BP monitoring; (3) multivariate analysis adjusted for covariates, including some measure of BP; (4) association of 24-hour BPV with subclinical organ damage; and (5) the predictive value of 24-hour BPV on target organ damage and rate of cardiovascular events. Of the 19 assessed studies, 17 reported significant associations between high ARV and the presence and progression of subclinical organ damage, as well as the incidence of hard end points, such as cardiovascular events. In all these cases, ARV remained a significant independent predictor ( P <0.05) after adjustment for BP and other clinical factors. In addition, increased ARV in systolic BP was associated with risk of all cardiovascular events (hazard ratio, 1.18; 95% confidence interval, 1.09-1.27). Only 2 cross-sectional studies did not find that high ARV was a significant risk factor. Current evidence suggests that ARV index adds significant prognostic information to 24-hour ambulatory BP monitoring and is a useful approach for studying the clinical value of BPV. © 2017 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley.

Four-hour quantitative real-time polymerase chain reaction-based comprehensive chromosome screening and accumulating evidence of accuracy, safety, predictive value, and clinical efficacy.

Science.gov (United States)

Treff, Nathan R; Scott, Richard T

2013-03-15

Embryonic comprehensive chromosomal euploidy may represent a powerful biomarker to improve the success of IVF. However, there are a number of aneuploidy screening strategies to consider, including different technologic platforms with which to interrogate the embryonic DNA, and different embryonic developmental stages from which DNA can be analyzed. Although there are advantages and disadvantages associated with each strategy, a series of experiments producing evidence of accuracy, safety, clinical predictive value, and clinical efficacy indicate that trophectoderm biopsy and quantitative real-time polymerase chain reaction (qPCR)-based comprehensive chromosome screening (CCS) may represent a useful strategy to improve the success of IVF. This Biomarkers in Reproductive Medicine special issue review summarizes the accumulated experience with the development and clinical application of a 4-hour blastocyst qPCR-based CCS technology. Copyright © 2013 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

The generation of hourly diffuse irradiation: A model from the analysis of the fluctuation of global irradiance series

Energy Technology Data Exchange (ETDEWEB)

Posadillo, R.; Lopez Luque, R. [Grupo de Investigacion de Fisica para las Energias y Recursos Renovables, Dpto. de Fisica Aplicada, UCO, Edificio C2 Campus de Rabanales, 14071 Cordoba (Spain)

2010-04-15

An analysis of models for the estimation of hourly diffuse irradiation based on the interrelations between the hourly diffuse fraction k{sub d} and the hourly clearness index k{sub t}, has concluded that k{sub t} is not a sufficient variable for parametrizing the effect of clouds on diffuse irradiation. A detailed study of the dispersion recorded by this diffuse component for a specific clearness index under partly cloudy sky conditions has led to analyzing how the variability in the instantaneous clearness index influences this dispersion. The data sets correspond to 10 years of hourly and instantaneous value records of global and diffuse radiation collected in Cordoba, Spain. In addition to the inclusion of the sine of solar elevation as a variable into the k{sub d}-k{sub t} correlations, this model propose the inclusion of others parameters related to the variability in the normalized clearness index within an hour and with the fluctuations presented by the time series of the instantaneous values of that index. Also presented is the implementation of an algorithm permitting both the determination of the hourly diffuse irradiation and the discrimination between the different sky conditions in those situations known by the designation partly cloudy sky. (author)

The Other 17 Hours: Valuing Out-of-School Time. Occasional Papers 30

Science.gov (United States)

Teitle, Jennifer, Ed.

2015-01-01

This issue of "Bank Street Occasional Papers" explores the value of time outside of school. Educators have given relatively little scholarly attention to young people's nonschool lives. Ignored or valorized, nonschool spaces show up in educational research only as a backdrop, implying that school learning is the yardstick by which to…

Hourly Precipitation Data (HPD) Publication

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Hourly Precipitation Data (HPD) Publication is archived and available from the National Climatic Data Center (NCDC). This publication contains hourly precipitation...

Public utilities and the public interest - raising and acknowledging this claim in proceedings concerning provisional legal protection

International Nuclear Information System (INIS)

Fischerhof, H.

1976-01-01

The following can be said of appeal proceedings against provisionally granted legal protection as claimed according to section 5 article 80 VwGO, the public utilities attending the proceedings, but not the licensing authority, being in the position to file this appeal: 1) The licensing authority takes part in the appeal proceedings and has the right to be heard. The licensing authority can also continue to act in the public interest in order to maintain the ordinances it issued, ordinances which were ordered to take immediate effect with public interest in mind. 2) The court of appeal has to examine the factual and the legal aspects of the previous instance's decision. 3) The public utility as the complainant can, within the framework of its official duties, combine the public interest with its own interests. (orig./HP) [de

Long working hours and cancer risk

DEFF Research Database (Denmark)

Heikkila, Katriina; Nyberg, Solja T.; Madsen, Ida E. H.

2016-01-01

in 116 462 men and women who were free of cancer at baseline. Incident cancers were ascertained from national cancer, hospitalisation and death registers; weekly working hours were self-reported. Results: During median follow-up of 10.8 years, 4371 participants developed cancer (n colorectal cancer: 393......Background: Working longer than the maximum recommended hours is associated with an increased risk of cardiovascular disease, but the relationship of excess working hours with incident cancer is unclear. Methods: This multi-cohort study examined the association between working hours and cancer risk......; n lung cancer: 247; n breast cancer: 833; and n prostate cancer: 534). We found no clear evidence for an association between working hours and the overall cancer risk. Working hours were also unrelated the risk of incident colorectal, lung or prostate cancers. Working greater than or equal to55 h...

[Effect of maximum blood pressure fluctuation on prognosis of patients with acute ischemic stroke within 24 hours after hospital admission].

Science.gov (United States)

Wang, H; Tang, Y; Zhang, Y; Xu, K; Zhao, J B

2018-05-10

Objective: To investigate the relationship between the maximum blood pressure fluctuation within 24 hours after admission and the prognosis at discharge. Methods: The patients with ischemic stroke admitted in Department of Neurology of the First Affiliated Hospital of Harbin Medical University within 24 hours after onset were consecutively selected from April 2016 to March 2017. The patients were grouped according to the diagnostic criteria of hypertension. Ambulatory blood pressure of the patients within 24 hours after admission were measured with bedside monitors and baseline data were collected. The patients were scored by NIHSS at discharge. The relationships between the maximum values of systolic blood pressure (SBP) or diastolic blood pressure (DBP) and the prognosis at discharge were analyzed. Results: A total of 521 patients with acute ischemic stroke were enrolled. They were divided into normal blood pressure group (82 cases) and hypertension group(439 cases). In normal blood pressure group, the maximum values of SBP and DBP were all in normal distribution ( P >0.05). The maximum value of SBP fluctuation was set at 146.6 mmHg. After adjustment for potential confounders, the OR for poor prognosis at discharge in patients with SBP fluctuation ≥146.6 mmHg was 2.669 (95 %CI : 0.594-11.992) compared with those with SBP fluctuation blood pressure at admission, the maximum values of SBP and DBP within 24 hours after admission had no relationship with prognosis at discharge. In acute ischemic stroke patients with hypertension at admission, the maximum values of SBP and DBP within 24 hours after admission were associated with poor prognosis at discharge.

US Naval Observatory Hourly Observations

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Hourly observations journal from the National Observatory in Washington DC. The observatory is the first station in the United States to produce hourly observations...

Hours Constraints Within and Between Jobs

OpenAIRE

Euwals, R.W.

1997-01-01

In the empirical literature on labour supply, several models are developed to incorporate constraints on working hours. These models do not address the question to which extent working hours are constrained within and between jobs. In this paper I investigate the effect of individual changes in labour supply preferences on actual working hours. The availability of subjective information on the individual’s preferred working hours gives direct measures on the degree of adjustment of working ho...

Long hours in paid and domestic work and subsequent sickness absence: does control over daily working hours matter?

Science.gov (United States)

Ala-Mursula, L; Vahtera, J; Kouvonen, A; Väänänen, A; Linna, A; Pentti, J; Kivimäki, M

2006-09-01

To explore the associations of working hours (paid, domestic, commuting, and total) with sickness absence, and to examine whether these associations vary according to the level of employee control over daily working hours. Prospective cohort study among 25 703 full-time public sector employees in 10 towns in Finland. A survey of working hours and control over working hours was carried out in 2000-01. The survey responses were linked with register data on the number of self-certified (3 days) sickness absences until the end of 2003. Poisson regression analyses with generalised estimating equations were used to take into account the fact that the employees were nested within work units. Adjustments were made for work and family characteristics and health behaviour. The mean follow-up period was 28.1 (SD 8.1) months. Long domestic and total working hours were associated with higher rates of medically certified sickness absences among both genders. In contrast, long paid working hours were associated with lower rates of subsequent self-certified sickness absences. Long commuting hours were related to increased rates of sickness absence of both types. Low control over daily working hours predicted medically certified sickness absences for both the women and men and self-certified absences for the men. In combinations, high control over working hours reduced the adverse associations of long domestic and total working hours with medically certified absences. Employee control over daily working hours may protect health and help workers successfully combine a full-time job with the demands of domestic work.

Heart Rate Variability in Obstetricians Working 14-Hour Call Compared to 24-Hour Call in Labour and Delivery.

Science.gov (United States)

Thurman, Robin H; Yoon, Eugene; Murphy, Kellie E; Windrim, Rory; Farrugia, M Michéle

2017-12-01

Obstetricians have stressful and demanding jobs that may impact their health. A physiological measurement of cardiac function which varies with stress is heart rate variability (HRV). By measuring the cyclic variations in R-R intervals, or beat-to-beat differences, HRV reflects the continuous interplay of the controlling forces in the autonomic nervous system. Studies have shown HRV to be reduced during periods of work-induced stress, including 24-hour shifts. Our study aimed to determine if there was a correlation between length of shift worked and HRV. We hypothesised that working for a full 24-hour period is more stressful than a shorter, nighttime-only period, and HRV analyses were used to measure this objectively. Obstetricians wore an HRV monitor for 24 hours during both a regular day followed by a 14-hour night shift and a continuous 24-hour shift in labour and delivery. The 24-hour samples were analysed using standard HRV measurements. HRV measurements obtained from each physician were then compared according to shift type, with each physician acting as his or her own comparator. There were no statistically significant differences in the most important measures of HRV between 24-hour periods which included either a 14-hour overnight shift or a continuous 24-hour shift on labour and delivery. We found no significant differences in key HRV measures in obstetricians working 14 hours versus 24 hours in labour and delivery. An anecdotal increase in physician awareness of his/her own health related to working conditions was noted during the study. Future studies should attempt to control for the hours prior to a night shift, assess associated endocrine variations, and focus upon HRV in the post-shift period. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

Analysis of death in major trauma: value of prompt post mortem computed tomography (pmCT) in comparison to office hour autopsy.

Science.gov (United States)

Schmitt-Sody, Markus; Kurz, Stefanie; Reiser, Maximilian; Kanz, Karl Georg; Kirchhoff, Chlodwig; Peschel, Oliver; Kirchhoff, Sonja

2016-03-29

To analyze diagnostic accuracy of prompt post mortem Computed Tomography (pmCT) in determining causes of death in patients who died during trauma room management and to compare the results to gold standard autopsy during office hours. Multiple injured patients who died during trauma room care were enrolled. PmCT was performed immediately followed by autopsy during office hours. PmCT and autopsy were analyzed primarily regarding pmCT ability to find causes of death and secondarily to define exact causes of death including accurate anatomic localizations. For the secondary analysis data was divided in group-I with equal results of pmCT and autopsy, group-II with autopsy providing superior results and group-III with pmCT providing superior information contributing to but not majorly causing death. Seventeen multiple trauma patients were enrolled. Since multiple trauma patients were enrolled more injuries than patients are provided. Eight patients sustained deadly head injuries (47.1%), 11 chest (64.7%), 4 skeletal system (23.5%) injuries and one patient drowned (5.8%). Primary analysis revealed in 16/17 patients (94.1%) causes of death in accordance with autopsy. Secondary analysis revealed in 9/17 cases (group-I) good agreement of autopsy and pmCT. In seven cases autopsy provided superior results (group-II) whereas in 1 case pmCT found more information (group-III). The presented work studied the diagnostic value of pmCT in defining causes of death in comparison to standard autopsy. Primary analysis revealed that in 94.1% of cases pmCT was able to define causes of death even if only indirect signs were present. Secondary analysis showed that pmCT and autopsy showed equal results regarding causes of death in 52.9%. PmCT is useful in traumatic death allowing for an immediate identification of causes of death and providing detailed information on bony lesions, brain injuries and gas formations. It is advisable to conduct pmCT especially in cases without consent to

Estimation of clear sky hourly global solar radiation in Iraq

Energy Technology Data Exchange (ETDEWEB)

Al-Jumaily, Kais J.; Al-Zuhairi, Munya F.; Mahdi, Zahraa S. [Department of Atmospheric Sciences, College of Science, Al-Mustansiriyah University, Baghdad (Iraq)

2012-07-01

The availability of hourly solar radiation data is very important for applications utilizing solar energy and for climate and environmental aspects. The aim of this work is to use a simple model for estimating hourly global solar radiation under clear sky condition in Iraq. Calculations were compared with measurements obtained from local station in Baghdad city and from Meteosat satellite data for different locations in Iraq. The statistical test methods of the mean bias error (MBE), root mean square error (RMSE) and t-test were used to evaluate the performance of the model. Results indicated that a fairly good agreement exists between calculated and measured values for all locations in Iraq. Since the model is independent of any meteorological variable, it would be of a practical use for rural areas where no meteorological data are available.

Design Values, U.S., 2015, EPA/OAR/OAQPS/AQAD

Data.gov (United States)

U.S. Environmental Protection Agency — This web service contains layers which depict design values for all NAAQS for through 2015 for the following: CO 8-hour, CO 1-hour, Lead 3-month, NO2 Annual, NO2...

Twenty-four hour care for schizophrenia.

Science.gov (United States)

Macpherson, Rob; Edwards, Thomas Rhys; Chilvers, Rupatharshini; David, Chris; Elliott, Helen J

2009-04-15

Despite modern treatment approaches and a focus on community care, there remains a group of people who cannot easily be discharged from psychiatric hospital directly into the community. Twenty-four hour residential rehabilitation (a 'ward-in-a-house') is one model of care that has evolved in association with psychiatric hospital closure programmes. To determine the effects of 24 hour residential rehabilitation compared with standard treatment within a hospital setting. We searched the Cochrane Schizophrenia Group Trials Register (May 2002 and February 2004). We included all randomised or quasi-randomised trials that compared 24 hour residential rehabilitation with standard care for people with severe mental illness. Studies were reliably selected, quality assessed and data extracted. Data were excluded where more than 50% of participants in any group were lost to follow-up. For binary outcomes we calculated the relative risk and its 95% confidence interval. We identified and included one study with 22 participants with important methodological shortcomings and limitations of reporting. The two-year controlled study evaluated "new long stay patients" in a hostel ward in the UK. One outcome 'unable to manage in the placement' provided usable data (n=22, RR 7.0 CI 0.4 to 121.4). The trial reported that hostel ward residents developed superior domestic skills, used more facilities in the community and were more likely to engage in constructive activities than those in hospital - although usable numerical data were not reported. These potential advantages were not purchased at a price. The limited economic data was not good but the cost of providing 24 hour care did not seem clearly different from the standard care provided by the hospital - and it may have been less. From the single, small and ill-reported, included study, the hostel ward type of facility appeared cheaper and positively effective. Currently, the value of this way of supporting people - which could be

46 CFR 15.710 - Working hours.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Working hours. 15.710 Section 15.710 Shipping COAST... Limitations and Qualifying Factors § 15.710 Working hours. In addition to prescribing watch requirements, 46 U.S.C. 8104 sets limitations on the working hours of credentialed officers and crew members...

75 FR 285 - Hours of Service

Science.gov (United States)

2010-01-05

... flexibility would not increase safety risks or adversely impact driver health? 3. How many hours per day and... period long enough to provide restorative sleep regardless of the number of hours worked prior to the... No. FMCSA-2004-19608] RIN 2126-AB26 Hours of Service AGENCY: Federal Motor Carrier Safety...

Associations of work hours with carotid intima-media thickness and ankle-brachial index: the Multi-Ethnic Study of Atherosclerosis (MESA).

Science.gov (United States)

Charles, Luenda E; Fekedulegn, Desta; Burchfiel, Cecil M; Fujishiro, Kaori; Landsbergis, Paul; Diez Roux, Ana V; Macdonald, Leslie; Foy, Capri G; Andrew, Michael E; Stukovsky, Karen H; Baron, Sherry

2012-10-01

Long working hours may be associated with cardiovascular disease (CVD). The objective was to investigate cross-sectional associations of work hours with carotid intima-media thickness (CIMT) and ankle-brachial index (ABI). Participants were 1694 women and 1868 men from the Multi-Ethnic Study of Atherosclerosis. CIMT and ABI were measured using standard protocols. Information on work hours was obtained from questionnaires. Mean values of CIMT and ABI were examined across five categories of hours worked per week (≤20, 21-39, 40, 41-50 and >50) using analysis of variance/analysis of covariance. p Values for trend were obtained from linear regression models. Mean age of participants was 56.9±8.4 years; 52.4% were men. Distinct patterns of association between work hours and the subclinical CVD biomarkers were found for women and men, although this heterogeneity by gender was not statistically significant. Among women only, work hours were positively associated with common (but not internal) CIMT (p=0.073) after full risk factor adjustment. Compared with women working 40 h, those working >50 h were more likely to have an ABI work hours and ABI were inversely associated (p=0.046). There was some evidence that the association between work hours and ABI was modified by occupational category (interaction p=0.061). Among persons classified as management/professionals, longer work hours was associated with lower ABI (p=0.015). No significant associations were observed among other occupational groups. Working longer hours may be associated with subclinical CVD. These associations should be investigated using longitudinal studies.

Poorer Health – Shorter Hours? Health and Flexibility of Hours of Work

OpenAIRE

Geyer, Johannes; Myck, Michal

2010-01-01

We analyse the role of health in determining the difference between desired and actual hours of work in a sample of German men using the Socio-Economic Panel Data for years 1996-2007. The effects of both self-assessed health and legal disability status are examined. About 60% of employees report working more than they would wish with the mean difference of -3.9 hours/week. We estimate static and dynamic model specifications allowing for auto-regressive nature of the dependent variable and tes...

[Relationships between walking hours, sleeping hours, meaningfulness of life (ikigai) and mortality in the elderly: prospective cohort study].

Science.gov (United States)

Seki, N

2001-07-01

The purpose of this study was to determine lifestyle factors in the elderly that affected longevity, using a population-based prospective study. The participants were 440 men and 625 women aged 60 to 74 living in a rural Japanese community. The baseline data such as age, sex, present illness, walking hours per day, sleeping hours per day, alcohol consumption, a history of smoking, and "ikigai" (meaningfulness of life) were collected in July 1990. During 90 months of follow-up from July 1990 to December 31 1997, there were 123 deaths. By Cox's multivariate hazard model adjusted age, sex, and medical histories, walking > or = 1 hour/day (HR = 0.63, 95% CI 0.44-0.91) and an "ikigai" (HR = 0.66, 95% CI 0.44-0.99) lowered the risk for all-cause mortality independently. In regard to hours of sleep, the cumulative survival curve showed that 7 hours/day was the border and sleeping > or = 7 hours/day lowered the risk (HR = 0.49 95% CI 0.33-0.74). Based on the findings in this study, walking > or = 1 hour/day, sleeping > or = 7 hours/day, and "ikigai" are important factors for longevity in the elderly.

5C.07: A METHOD TO ESTIMATE 24-HOUR SODIUM EXCRETION THROUGH SPOT URINE SAMPLES AND ITS APPLICATION VALUE FOR TARGET-ORGAN DAMAGE ASSESSMENT.

Science.gov (United States)

Wang, H; Zhao, L; Xi, Y; Sun, N

2015-06-01

24-h urine sodium excretion is considered the most reliable method to evaluate the salt intakes. However, this method is cumbersome. So we want to develop formulas to estimate 24-h urinary sodium excretion using spot urinary samples in Chinese hypertensive population and explore the application value of this method in salt intake assessment and target organ damage. 1. We enrolled 510 cases of hospitalized patients with hypertension, 2/3 of them were arranged randomly to formula group to develop a new formula and the remainings were used to test the performance of the formula. All participants were instructed to collect a 24-h urine sample, a second morning voiding urine sample (SMU), and a post-meridiem urine sample in the late afternoon or early evening, prior to the evening meal (PMU). All samples were sent to measure sodium and creatinine concentration.2. We compared the differences of office blood pressure, 24-hour ambulatory blood pressure and left ventricular hypertrophy, vascular stiffness and urine protein among groups of different sodium intake. 24hour sodium excretion formulas was obtained using SMU and PMU respectively, which have good cosistency. The difference between the estimated and measured values in sodium excretion is 12.66mmol/day (SMU) and 9.41mmol/day (PM), to be equal to 0.7 g (SMU) and 0.6 g (PM) salt intake. Comparing with Kawasaki and Tanaka method, the new formula shows the lower degree of deviation, and higher accuracy and precision. Blood pressure of high urinary sodium group is higher than that in low urinary sodium group (P < 0.05). Left ventricular hypertrophy and urinary albumin/creatinine aggravated with the salt intake increase, this has eliminated the influence of other factors. All of morphologies of the relationship between ambulatory arterial stiffness index, pulse wave velocity and carotid intima-media thickness with quartiles of sodium intake resembled a J-shaped curve. In Chinese hypertensive population, the

Raman spectroscopic assessment of degree of conversion of bulk-fill resin composites--changes at 24 hours post cure.

Science.gov (United States)

Par, M; Gamulin, O; Marovic, D; Klaric, E; Tarle, Z

2015-01-01

The aim of this study was to determine degree of conversion (DC) of solid and flowable bulk-fill composites immediately and after 24 hours and investigate the variations of DC at surface and depths up to 4 mm. Eight bulk-fill composites (Tetric EvoCeram Bulk Fill [shades IVA and IVB], Quixfil, X-tra fil, Venus Bulk Fill, X-tra Base, SDR, Filtek Bulk Fill) were investigated, and two conventional composites (GrandioSO, X-Flow) were used as controls. The samples (n = 5) were cured for 20 seconds with irradiance of 1090 mW/cm(2). Raman spectroscopic measurements were made immediately after curing on sample surfaces and after 24 hours of dark storage at surface and at incremental depths up to 4 mm. Mean DC values were compared using repeated measures analysis of variance (ANOVA) and t-test for dependent samples. Surface DC values immediately after curing ranged from 59.1%-71.8%, while the 24-hour postcure values ranged from 71.3%-86.1%. A significant increase of DC was observed 24 hours post cure for all bulk-fill composites, which amounted from 11.3% to 16.9%. Decrease of DC through depths up to 4 mm varied widely among bulk-fill composites and ranged from 2.9% to 19.7%. All bulk-fill composites presented a considerable 24-hour postcure DC increase and clinically acceptable DC at depths up to 4 mm. Conventional control composites were sufficiently cured only up to 2 mm, despite significant postcure polymerization.

Atrial Fibrillation Detection During 24-Hour Ambulatory Blood Pressure Monitoring: Comparison With 24-Hour Electrocardiography.

Science.gov (United States)

Kollias, Anastasios; Destounis, Antonios; Kalogeropoulos, Petros; Kyriakoulis, Konstantinos G; Ntineri, Angeliki; Stergiou, George S

2018-07-01

This study assessed the diagnostic accuracy of a novel 24-hour ambulatory blood pressure (ABP) monitor (Microlife WatchBP O3 Afib) with implemented algorithm for automated atrial fibrillation (AF) detection during each ABP measurement. One hundred subjects (mean age 70.6±8.2 [SD] years; men 53%; hypertensives 85%; 17 with permanent AF; 4 paroxysmal AF; and 79 non-AF) had simultaneous 24-hour ABP monitoring and 24-hour Holter monitoring. Among a total of 6410 valid ABP readings, 1091 (17%) were taken in ECG AF rhythm. In reading-to-reading ABP analysis, the sensitivity, specificity, and accuracy of ABP monitoring in detecting AF were 93%, 87%, and 88%, respectively. In non-AF subjects, 12.8% of the 24-hour ABP readings indicated false-positive AF, of whom 27% were taken during supraventricular premature beats. There was a strong association between the proportion of false-positive AF readings and that of supraventricular premature beats ( r =0.67; P ABP monitoring had 100%/85% sensitivity/specificity (area under the curve 0.91; P ABP monitor with AF detector has high sensitivity and moderate specificity for AF screening during routine ABP monitoring. Thus, in elderly hypertensives, a 24-hour ABP recording with at least 26% of the readings suggesting AF indicates a high probability for AF diagnosis and should be regarded as an indication for performing 24-hour Holter monitoring. © 2018 American Heart Association, Inc.

Impact of Different Normality Thresholds for 24-hour ABPM at the Primary Health Care Level

Directory of Open Access Journals (Sweden)

Guilherme Brasil Grezzana

Full Text Available Abstract Background: Hypertension is an important risk factor for cardiovascular outcomes. Primary health care (PHC physicians should be prepared to act appropriately in the prevention of cardiovascular risk factors. However, the rates of patients with control of blood pressure (BP remain low. The impact of the reclassification of high BP by 24-hour ambulatory BP monitoring (ABPM can lead to different medical decisions in PHC. Objective: To evaluate the agreement between the BP measured by a conventional method by PHC physicians and by 24-hour ABPM, considering different BP normal thresholds for the 24-hour ABPM according to the V Brazilian ABPM Guidelines and the European Society of Hypertension Guidelines. Methods: A cross-sectional study including 569 hypertensive patients. The BP was initially measured by the PHC physicians and, later, by 24-hour ABPM. The BP measurements were obtained independently between the two methods. The therapeutic targets for the conventional BP followed the guidelines by the Eighth Joint National Committee (JNC 8, the V ABPM Brazilian Guidelines, and the 2013 European Hypertension Guidelines. Results: There was an accuracy of 54.8% (95% confidence interval [95%CI] 0.51 - 0.58% for the BP measured with the conventional method when compared with the 24-hour ABPM, with a sensitivity of 85% (95%CI 80.8 - 88.6%, specificity of 31.9% (95%CI 28.7 - 34.7%, and kappa value of 0.155, when considering the European Hypertension Guidelines. When using more stringent thresholds to characterize the BP as "normal" by ABPM, the accuracy was 45% (95%CI 0.41 - 0.47% for conventional measurement when compared with 24-hour ABPM, with a sensitivity of 86.7% (95%CI 0.81 - 0.91%, specificity of 29% (95%CI 0.26 - 0.30%, and kappa value of 0.103. Conclusion: The BP measurements obtained by PHC physicians showed low accuracy when compared with those obtained by 24-hour ABPM, regardless of the threshold set by the different guidelines.

Strategies to accommodate resident work-hour restrictions: impact on surgical education.

Science.gov (United States)

Freiburg, Carter; James, Ted; Ashikaga, Takamura; Moalem, Jacob; Cherr, Greg

2011-01-01

The introduction of duty-hour restrictions has impacted surgical training. Several strategies were introduced by training programs in response to these restrictions. The purpose of this study was to assess the various strategies employed by residency programs to comply with work-hour restrictions with respect to the impact on the quality of surgical education. A national survey was developed and distributed to resident members of the Resident and Associate Society of the American College of Surgeons in all accredited residency programs across North America. Questions in the survey addressed 10 separate accommodation strategies used by training programs to adhere to resident work-hour restrictions. Resident respondents completed a 5-point Likert scale rating each strategy according to its impact on surgical education (detrimental, not very helpful, neutral, somewhat helpful, and very helpful). A total of 599 (9.7%) responses were received from 6186 members of the Resident Associate Society. The use of health information technology (IT), nurse practitioners, and physician assistants were most highly rated. Hiring clinical fellows, establishing nonteaching services, and shift-work scheduling were the three most poorly rated accommodations to work-hour restrictions with respect to resident education. Hospital IT and nonphysician care providers were rated by residents to optimize surgical education in the current work-hour limitation environment. We infer that strategies which lead to increased efficiency and redistribution of resident workload allow surgical trainees to spend more time on activities perceived to have higher educational value. Copyright © 2011 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

48 CFR 552.236-74 - Working Hours.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Working Hours. 552.236-74... Hours. As prescribed in 536.570-5, insert the following clause: Working Hours (APR 1984) (a) It is contemplated that all work will be performed during the customary working hours of the trades involved unless...

Development and validation of a direct-comparison method for cardiac {sup 123}I-metaiodobenzylguanidine washout rates derived from late 3-hour and 4-hour imaging

Energy Technology Data Exchange (ETDEWEB)

Okuda, Koichi; Hashimoto, Mitsumasa [Kanazawa Medical University, Department of Physics, Kahoku, Ishikawa (Japan); Nakajima, Kenichi; Matsuo, Shinro; Taki, Junichi; Kinuya, Seigo [Kanazawa University Hospital, Department of Nuclear Medicine, Kanazawa, Ishikawa (Japan); Sugino, Shuichi [Okayama Kyokuto Hospital, Department of Radiology, Okayama, Okayama (Japan); Kirihara, Yumiko [FUJIFILM RI Pharma Co., Ltd., Chuo-Ku, Tokyo (Japan)

2016-02-15

The washout rate (WR) has been used in {sup 123}I-metaiodobenzylguanidine (MIBG) imaging to evaluate cardiac sympathetic innervation. However, WR varies depending on the time between the early and late MIBG scans. Late scans are performed at either 3 or 4 hours after injection of MIBG. The aim of this study was to directly compare the WR at 3 hours (WR{sub 3h}) with the WR at 4 hours (WR{sub 4h}). We hypothesized that the cardiac count would reduce linearly between the 3-hour and 4-hour scans. A linear regression model for cardiac counts at two time-points was generated. We enrolled a total of 96 patients who underwent planar {sup 123}I-MIBG scintigraphy early (15 min) and during the late phase at both 3 and 4 hours. Patients were randomly divided into two groups: a model-creation group (group 1) and a clinical validation group (group 2). Cardiac counts at 15 minutes (count{sub early}), 3 hours (count{sub 3h}) and 4 hours (count{sub 4h}) were measured. Cardiac count{sub 4h} was mathematically estimated using the linear regression model from count{sub early} and count{sub 3h}. In group 1, the actual cardiac count{sub 4h}/count{sub early} was highly significantly correlated with count{sub 3h}/count{sub early} (r = 0.979). In group 2, the average estimated count{sub 4h} was 92.8 ± 31.9, and there was no significant difference between this value and the actual count{sub 4h} (91.9 ± 31.9). Bland-Altman analysis revealed a small bias of -0.9 with 95 % limits of agreement of -6.2 and +4.3. WR{sub 4h} calculated using the estimated cardiac count{sub 4h} was comparable to the actual WR{sub 4h} (24.3 ± 9.6 % vs. 25.1 ± 9.7 %, p = ns). Bland-Altman analysis and the intraclass correlation coefficient showed that there was excellent agreement between the estimated and actual WR{sub 4h}. The linear regression model that we used accurately estimated cardiac count{sub 4h} using count{sub early} and count{sub 3h}. Moreover, WR{sub 4h} that was mathematically calculated using

Estimation of Rainfall Erosivity via 1-Minute to Hourly Rainfall Data from Taipei, Taiwan

Science.gov (United States)

Huang, Ting-Yin; Yang, Ssu-Yao; Jan, Chyan-Deng

2017-04-01

Soil erosion is a natural process on hillslopes that threats people's life and properties, having a considerable environmental and economic implications for soil degradation, agricultural activity and water quality. The rainfall erosivity factor (R-factor) in the Universal Soil Loss Equation (USLE), composed of total kinetic energy (E) and the maximum 30-min rainfall intensity (I30), is widely used as an indicator to measure the potential risks of soil loss caused by rainfall at a regional scale. This R factor can represent the detachment and entrainment involved in climate conditions on hillslopes, but lack of 30-min rainfall intensity data usually lead to apply this factor more difficult in many regions. In recent years, fixed-interval, hourly rainfall data is readily available and widely used due to the development of automatic weather stations. Here we assess the estimations of R, E, and I30 based on 1-, 5-, 10-, 15-, 30-, 60-minute rainfall data, and hourly rainfall data obtained from Taipei weather station during 2004 to 2010. Results show that there is a strong correlation among R-factors estimated from different interval rainfall data. Moreover, the shorter time-interval rainfall data (e.g., 1-min) yields larger value of R-factor. The conversion factors of rainfall erosivity (ratio of values estimated from the resolution lower than 30-min rainfall data to those estimated from 60-min and hourly rainfall data, respectively) range from 1.85 to 1.40 (resp. from 1.89 to 1.02) for 60-min (resp. hourly) rainfall data as the time resolution increasing from 30-min to 1-min. This paper provides useful information on estimating R-factor when hourly rainfall data is only available.

Extended working hours: Impacts on workers

Science.gov (United States)

D. Mitchell; T. Gallagher

2010-01-01

Some logging business owners are trying to manage their equipment assets by increasing the scheduled machine hours. The intent is to maximize the total tons produced by a set of equipment. This practice is referred to as multi-shifting, double-shifting, or extended working hours. One area often overlooked is the impact that working non-traditional hours can have on...

Provisional safety analyses for SGT stage 2 -- Models, codes and general modelling approach

International Nuclear Information System (INIS)

2014-12-01

In the framework of the provisional safety analyses for Stage 2 of the Sectoral Plan for Deep Geological Repositories (SGT), deterministic modelling of radionuclide release from the barrier system along the groundwater pathway during the post-closure period of a deep geological repository is carried out. The calculated radionuclide release rates are interpreted as annual effective dose for an individual and assessed against the regulatory protection criterion 1 of 0.1 mSv per year. These steps are referred to as dose calculations. Furthermore, from the results of the dose calculations so-called characteristic dose intervals are determined, which provide input to the safety-related comparison of the geological siting regions in SGT Stage 2. Finally, the results of the dose calculations are also used to illustrate and to evaluate the post-closure performance of the barrier systems under consideration. The principal objective of this report is to describe comprehensively the technical aspects of the dose calculations. These aspects comprise: · the generic conceptual models of radionuclide release from the solid waste forms, of radionuclide transport through the system of engineered and geological barriers, of radionuclide transfer in the biosphere, as well as of the potential radiation exposure of the population, · the mathematical models for the explicitly considered release and transport processes, as well as for the radiation exposure pathways that are included, · the implementation of the mathematical models in numerical codes, including an overview of these codes and the most relevant verification steps, · the general modelling approach when using the codes, in particular the generic assumptions needed to model the near field and the geosphere, along with some numerical details, · a description of the work flow related to the execution of the calculations and of the software tools that are used to facilitate the modelling process, and · an overview of the

Provisional safety analyses for SGT stage 2 -- Models, codes and general modelling approach

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-12-15

In the framework of the provisional safety analyses for Stage 2 of the Sectoral Plan for Deep Geological Repositories (SGT), deterministic modelling of radionuclide release from the barrier system along the groundwater pathway during the post-closure period of a deep geological repository is carried out. The calculated radionuclide release rates are interpreted as annual effective dose for an individual and assessed against the regulatory protection criterion 1 of 0.1 mSv per year. These steps are referred to as dose calculations. Furthermore, from the results of the dose calculations so-called characteristic dose intervals are determined, which provide input to the safety-related comparison of the geological siting regions in SGT Stage 2. Finally, the results of the dose calculations are also used to illustrate and to evaluate the post-closure performance of the barrier systems under consideration. The principal objective of this report is to describe comprehensively the technical aspects of the dose calculations. These aspects comprise: · the generic conceptual models of radionuclide release from the solid waste forms, of radionuclide transport through the system of engineered and geological barriers, of radionuclide transfer in the biosphere, as well as of the potential radiation exposure of the population, · the mathematical models for the explicitly considered release and transport processes, as well as for the radiation exposure pathways that are included, · the implementation of the mathematical models in numerical codes, including an overview of these codes and the most relevant verification steps, · the general modelling approach when using the codes, in particular the generic assumptions needed to model the near field and the geosphere, along with some numerical details, · a description of the work flow related to the execution of the calculations and of the software tools that are used to facilitate the modelling process, and · an overview of the

Hourly weather forecasts for gas turbine power generation

Directory of Open Access Journals (Sweden)

G. Giunta

2017-06-01

Full Text Available An hourly short-term weather forecast can optimize processes in Combined Cycle Gas Turbine (CCGT plants by helping to reduce imbalance charges on the national power grid. Consequently, a reliable meteorological prediction for a given power plant is crucial for obtaining competitive prices for the electric market, better planning and stock management, sales and supplies of energy sources. The paper discusses the short-term hourly temperature forecasts, at lead time day+1 and day+2, over a period of thirteen months in 2012 and 2013 for six Italian CCGT power plants of 390 MW each (260 MW from the gas turbine and 130 MW from the steam turbine. These CCGT plants are placed in three different Italian climate areas: the Po Valley, the Adriatic coast, and the North Tyrrhenian coast. The meteorological model applied in this study is the eni-Kassandra Meteo Forecast (e‑kmf™, a multi-model approach system to provide probabilistic forecasts with a Kalman filter used to improve accuracy of local temperature predictions. Performance skill scores, computed by the output data of the meteorological model, are compared with local observations, and used to evaluate forecast reliability. In the study, the approach has shown good overall scores encompassing more than 50,000 hourly temperature values. Some differences from one site to another, due to local meteorological phenomena, can affect the short-term forecast performance, with consequent impacts on gas-to-power production and related negative imbalances. For operational application of the methodology in CCGT power plant, the benefits and limits have been successfully identified.

Developing a provisional and national renal disease registry for Iran

Directory of Open Access Journals (Sweden)

Sima Ajami

2015-01-01

Full Text Available Background: Disease registry is a database that includes information about people suffering a special kind of disease. The aim of this study was to first identify and compare the National Renal Disease Registry (NRDR characteristics in some countries with Iran; and second, develop a provisional and NRDR for Iran. Materials and Methods: Retrieval of data of the NRDR was performed by scholars responsible in related agencies, including the Ministry of Health and Medical Education, Renal Disease charity, and data registries in the United States, United Kingdom, Malaysia, and Iran. This research was applied, and the study was descriptive-comparative. The study population consisted of the NRDR in selected countries in which data were collected by forms that were designed according to the study objectives. Sources of data were researchers, articles, books, journals, databases, websites, related documents, and people who are active in this regard, and related agencies, including the Ministry of Health and Medical Education, and patient support charity. The researchers collected data for each country based on the study objectives and then put them in comparative tables. Data were analyzed by descriptive, comparative, and theoretical methods. Results: Most of the renal transplant teams report their own results as a single center experiences. America and Britain have a preeminent national registry of renal disease compared to other countries. Conclusion: Given that control, prevention, and treatment of chronic renal diseases incur high expenses and the disease is one of leading mortality factors in Iran and across the world and since national registry system for chronic renal diseases can provide better tools and strategies to manage and evaluate patients′ characteristics as well as risk factors which eventually leads to making better decisions.

Changing the formula of residents' work hours in internal medicine: moving from "years in training" to "hours in training".

Science.gov (United States)

Mansi, Ishak A

2011-03-01

In a recent report, the Institute of Medicine recommended more restrictions on residents' working hours. Several problems exist with a system that places a weekly limit on resident duty hours: (1) it assumes the presence of a linear relationship between hours of work and patient safety; (2) it fails to consider differences in intensity among programs; and (3) it does not address increases in the scientific content of medicine, and it places the burden of enforcing the duty hour limits on the Accreditation Council for Graduate Medical Education. An innovative method of calculating credit hours for graduate medical education would shift the focus from "years of residency" to "hours of residency." For example, internal medicine residents would be requested to spend 8640 hours of total training hours (assuming 60 hours per week for 48 weeks annually) instead of the traditional 3 years. This method of counting training hours is used by other professions, such as the Intern Development Program of the National Council of Architectural Registration Boards. The proposed approach would allow residents and program directors to pace training based on individual capabilities. Standards for resident education should include the average number of patients treated in each setting (inpatient or outpatient). A possible set of "multipliers" based on these parameters, and possibly others such as resident evaluation, is devised to calculate the "final adjusted accredited hours" that count toward graduation. Substituting "years of training" with "hours of training" may resolve many of the concerns with the current residency education model, as well as adapt to the demands of residents' personal lives. It also may allow residents to pace their training according to their capabilities and learning styles, and contribute to reflective learning and better quality education.

Making sense: duty hours, work flow, and waste in graduate medical education.

Science.gov (United States)

Bush, Roger W; Philibert, Ingrid

2009-12-01

Parsimony, and not industry, is the immediate cause of the increase of capital. Industry, indeed, provides the subject which parsimony accumulates. But whatever industry might acquire, if parsimony did not save and store up, the capital would never be the greater.Adam Smith, The Wealth of Nations, book 2, chapter 31In 2003, the Accreditation Council for Graduate Medical Education implemented resident duty hour limits that included a weekly limit and limits on continuous hours. Recent recommendations for added reductions in resident duty hours have produced concern about concomitant reductions in future graduates' preparedness for independent practice. The current debate about resident hours largely does not consider whether all hours residents spend in the educational and clinical-care environment contribute meaningfully either to residents' learning or to effective patient care. This may distract the community from waste in the current clinical-education model. We propose that use of "lean production" and quality improvement methods may assist teaching institutions in attaining a deeper understanding of work flow and waste. These methods can be used to assign value to patient- and learner-centered activities and outputs and to optimize the competing and synergistic aspects of all desired outcomes to produce the care the Institute of Medicine recommends: safe, effective, efficient, patient-centered, timely, and equitable. Finally, engagement of senior clinical faculty in determining the culture of the care and education system will contribute to an advanced social-learning and care network.

Long working hours and depressive symptoms

DEFF Research Database (Denmark)

Virtanen, Marianna; Jokela, Markus; Madsen, Ida Eh

2018-01-01

Objectives This systematic review and meta-analysis combined published study-level data and unpublished individual-participant data with the aim of quantifying the relation between long working hours and the onset of depressive symptoms. Methods We searched PubMed and Embase for published....... In the majority of cohorts, long working hours was defined as working ≥55 hours per week. In multivariable-adjusted meta-analyses of 189 729 participants from 35 countries [96 275 men, 93 454 women, follow-up ranging from 1-5 years, 21 747 new-onset cases), there was an overall association of 1.14 (95% confidence...... interval (CI) 1.03-1.25] between long working hours and the onset of depressive symptoms, with significant evidence of heterogeneity (I 2=45.1%, P=0.004). A moderate association between working hours and depressive symptoms was found in Asian countries (1.50, 95% CI 1.13-2.01), a weaker association...

Long working hours and depressive symptoms

DEFF Research Database (Denmark)

Virtanen, Marianna; Jokela, Markus; Madsen, Ida Eh

2018-01-01

. In the majority of cohorts, long working hours was defined as working ≥55 hours per week. In multivariable-adjusted meta-analyses of 189 729 participants from 35 countries [96 275 men, 93 454 women, follow-up ranging from 1-5 years, 21 747 new-onset cases), there was an overall association of 1.14 (95% confidence......Objectives This systematic review and meta-analysis combined published study-level data and unpublished individual-participant data with the aim of quantifying the relation between long working hours and the onset of depressive symptoms. Methods We searched PubMed and Embase for published...... interval (CI) 1.03-1.25] between long working hours and the onset of depressive symptoms, with significant evidence of heterogeneity (I 2=45.1%, P=0.004). A moderate association between working hours and depressive symptoms was found in Asian countries (1.50, 95% CI 1.13-2.01), a weaker association...

Work and family life of childrearing women workers in Japan: comparison of non-regular employees with short working hours, non-regular employees with long working hours, and regular employees.

Science.gov (United States)

Seto, Masako; Morimoto, Kanehisa; Maruyama, Soichiro

2006-05-01

This study assessed the working and family life characteristics, and the degree of domestic and work strain of female workers with different employment statuses and weekly working hours who are rearing children. Participants were the mothers of preschoolers in a large Japanese city. We classified the women into three groups according to the hours they worked and their employment conditions. The three groups were: non-regular employees working less than 30 h a week (n=136); non-regular employees working 30 h or more per week (n=141); and regular employees working 30 h or more a week (n=184). We compared among the groups the subjective values of work, financial difficulties, childcare and housework burdens, psychological effects, and strains such as work and family strain, work-family conflict, and work dissatisfaction. Regular employees were more likely to report job pressures and inflexible work schedules and to experience more strain related to work and family than non-regular employees. Non-regular employees were more likely to be facing financial difficulties. In particular, non-regular employees working longer hours tended to encounter socioeconomic difficulties and often lacked support from family and friends. Female workers with children may have different social backgrounds and different stressors according to their working hours and work status.

Provisional Peer-Reviewed Toxicity Values for Rubidium Compounds (Rubidium Chloride)

Science.gov (United States)

This is a PPRTV for Rubidium Compounds submitted to the Superfund Program.This assessment supports multiple isomers (see related links) and this page is about the chemical rubidium chloride, CASRN 7791-11-9.

Statistical summary of coal mining, coking, and briquetting plants and review of the solid fuels market in 1976

Energy Technology Data Exchange (ETDEWEB)

Medaets, J

1977-05-01

This paper reviews the activities of the Belgian coal and coke industry noting that some of the figures are still provisional. Figures are given for production and stocks of coal; personnel; productivity; working hours; salaries; and the production of coke and briquettes.

75 FR 82170 - Hours of Service of Drivers

Science.gov (United States)

2010-12-29

... drivers to take breaks when needed and would reduce safety and health risks associated with long hours... long work hours, without significantly compromising their ability to do their jobs and earn a living... between hours 3.5 and 7 of an 11-hour driving period. Working beyond the 7th hour without a break is...

Long Work Hours: Volunteers and Conscripts

OpenAIRE

Robert Drago; Mark Wooden; David Black

2006-01-01

Panel data from Australia are used to study the prevalence of work hours mismatch among long hours workers and, more importantly, how that mismatch persists and changes over time, and what factors are associated with these changes. Particular attention is paid to the roles played by household debt, ideal worker characteristics and gender. Both static and dynamic multinomial logit models are estimated, with the dependent variable distinguishing long hours workers from other workers, and within...

Measuring Nursing Value from the Electronic Health Record.

Science.gov (United States)

Welton, John M; Harper, Ellen M

2016-01-01

We report the findings of a big data nursing value expert group made up of 14 members of the nursing informatics, leadership, academic and research communities within the United States tasked with 1. Defining nursing value, 2. Developing a common data model and metrics for nursing care value, and 3. Developing nursing business intelligence tools using the nursing value data set. This work is a component of the Big Data and Nursing Knowledge Development conference series sponsored by the University Of Minnesota School Of Nursing. The panel met by conference calls for fourteen 1.5 hour sessions for a total of 21 total hours of interaction from August 2014 through May 2015. Primary deliverables from the bit data expert group were: development and publication of definitions and metrics for nursing value; construction of a common data model to extract key data from electronic health records; and measures of nursing costs and finance to provide a basis for developing nursing business intelligence and analysis systems.

Preferred vs Actual Working Hours in Couple Households

OpenAIRE

Yi-Ping Tseng; Mark Wooden

2005-01-01

Working hours in Australia are quite widely distributed around the population mean. That is, there are relatively many people working both relatively short hours and relatively long hours each week. From a welfare perspective, however, it is not the actual number of hours worked that is of importance, but whether the hours being worked are consistent with individual preferences. In this paper the question of how closely hours preferences are being met is examined using data collected in the f...

Work Hours Constraints: Impacts and Policy Implications

OpenAIRE

Constant, Amelie F.; Otterbach, Steffen

2011-01-01

If individuals reveal their preference as consumers, then they are taken seriously. What happens if individuals, as employees, reveal their preferences in working hours? And what happens if there is a misalignment between actual hours worked and preferred hours, the so-called work hours constraints? How does this affect the productivity of workers, their health, and overall life satisfaction? Labor supply and corresponding demand are fundamental to production. Labor economists know for long t...

Breaking the Long Hours Culture.

Science.gov (United States)

Kodz, J.; Kersley, B.; Strebler, M. T.; O'Regan, S.

Case studies of 12 leading British employers were driven by employers' interest in issues related to working long hours in light of introduction of the Working Time Directive, a European Community initiative enacted into British law that sets limits on working hours per week. Data showed over one-fourth of full-time employees worked over 48 hours…

Working hours: Past, present, and future

OpenAIRE

Dolton, Peter

2017-01-01

Working hours across the world are falling, but considerable variation remains. In some countries people work 70% more hours per year, on average, than in other countries. Much of this variation is due to differences in the prevalence of part-time work and patterns of female labor market participation. Looking ahead, the question of how reducing working hours will affect productivity is significant. In addition, how individuals divide up their leisure and work time and what the appropriate wo...

Making residency work hour rules work.

Science.gov (United States)

Cohen, I Glenn; Czeisler, Charles A; Landrigan, Christopher P

2013-01-01

In July 2011, the ACGME implemented new rules that limit interns to 16 hours of work in a row, but continue to allow 2nd-year and higher resident physicians to work for up to 28 consecutive hours. Whether the ACGME's 2011 work hour limits went too far or did not go far enough has been hotly debated. In this article, we do not seek to re-open the debate about whether these standards get matters exactly right. Instead, we wish to address the issue of effective enforcement. That is, now that new work hour limits have been established, and given that the ACGME has been unable to enforce work hour limits effectively on its own, what is the best way to make sure the new limits are followed in order to reduce harm to residents, patients, and others due to sleep-deprived residents? We focus on three possible national approaches to the problem, one rooted in funding, one rooted in disclosure, and one rooted in tort law. © 2013 American Society of Law, Medicine & Ethics, Inc.

Living with Uncertainty while Maintaining Educational Values (A Critical Overview)

Science.gov (United States)

Barrow, Robin

2013-01-01

This paper endorses the overall argument of the preceding contributions. It argues for an approach to teacher education focused more strongly on the nature of the educational enterprise and the why, wherefore and how of teaching specific subjects. The importance of distinguishing between the provisional nature of knowledge claims and relativism is…

Is the Office Hour Obsolete?

Science.gov (United States)

Behrens, Susan

2013-01-01

A colleague can't make a coffee date at a time the author proposes because it would conflict with his office hour. No student has actually made an appointment with him during the hour, but he is committed to being in his office as promised in case someone drops by. The author's reaction to her colleague's faithfulness to his posted office hour…

Change from an 8-hour shift to a 12-hour shift, attitudes, sleep, sleepiness and performance.

Science.gov (United States)

Lowden, A; Kecklund, G; Axelsson, J; Akerstedt, T

1998-01-01

The present study sought to evaluate the effect of a change from a rotating 3-shift (8-hour) to a 2-shift shift (12 hour) schedule on sleep, sleepiness, performance, perceived health, and well-being. Thirty-two shift workers at a chemical plant (control room operators) responded to a questionnaire a few months before a change was made in their shift schedule and 10 months after the change. Fourteen workers also filled out a diary, carried activity loggers, and carried out reaction-time tests (beginning and end of shift). Fourteen day workers served as a reference group for the questionnaires and 9 were intensively studied during a week with workdays and a free weekend. The questionnaire data showed that the shift change increased satisfaction with workhours, sleep, and time for social activities. Health, perceived accident risk, and reaction-time performance were not negatively affected. Alertness improved and subjective recovery time after night work decreased. The quick changes in the 8-hour schedule greatly increased sleep problems and fatigue. Sleepiness integrated across the entire shift cycle showed that the shift workers were less alert than the day workers, across workdays and days off (although alertness increased with the 12-hour shift). The change from 8-hour to 12-hour shifts was positive in most respects, possibly due to the shorter sequences of the workdays, the longer sequences of consecutive days off, the fewer types of shifts (easier planning), and the elimination of quick changes. The results may differ in groups with a higher work load.

48 CFR 536.570-5 - Working hours.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Working hours. 536.570-5... CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Contract Clauses 536.570-5 Working hours. Insert 552.236-74, Working Hours, in solicitations and contracts if construction, dismantling...

Working 40 Hours or Not Working 39: Lessons from the 1981 Mandatory Reduction of Weekly Working Hours

OpenAIRE

Crépon, Bruno; Kramarz, Francis

1999-01-01

We use longitudinal individual wage, hours, and employment data to investigate the effect of the 1981 mandatory reduction of weekly working hours in France. A few months after François Mitterrand's election of May 1981, the government, applying its programme decided first to increase the minimum wage by 5% and, second, to reduce weekly working hours - from 40 to 39 - together with mandatory stability of monthly earnings of minimum wage workers and strong recommendation for stability of monthl...

Hourly Electricity Prices in Day-Ahead Markets

NARCIS (Netherlands)

R. Huisman (Ronald); C. Huurman; R.J. Mahieu (Ronald)

2007-01-01

textabstractThis paper focuses on the characteristics of hourly electricity prices in day-ahead markets. In these markets, quotes for day-ahead delivery of electricity are submitted simultaneously for all hours in the next day. The same information set is used for quoting all hours of the day. The

The impact of processing delay on the exposure index value

Science.gov (United States)

Butler, M. L.; Brennan, P. C.; Last, J.; Rainford, L.

2010-04-01

Digital radiography poses the risk of unnoticed increases in patient dose. Manufacturers responded to this by offering an exposure index (EI) value to clinicians. Use of the EI value in clinical practice is encouraged by the American College of Radiology and American Association of Physicists in Medicine. This study assesses the impact of processing delay on the EI value. An anthropormorphic phantom was used to simulate three radiographic examinations; skull, pelvis and chest. For each examination, the phantom was placed in the optimal position and exposures were chosen in accordance with international guidelines. A Carestream (previously Kodak) computed radiography system was used. The imaging plate was exposed, and processing was delayed in various increments from 30 seconds to 24 hours, representing common delays in clinical practice. The EI value was recorded for each exposure. The EI value decreased considerably with increasing processing delay. The EI value decreased by 100 within 25 minutes delay for the chest, and 20 minutes for the skull and pelvis. Within 1 hour, the EI value had fallen by 180, 160 and 100 for the chest, skull and pelvis respectively. After 24 hours, the value had decreased by 370, 350 and 340 for the chest, skull and pelvis respectively, representing to the clinician more then a halving of exposure to the detector in Carestream systems. The assessment of images using EI values should be approached with caution in clinical practice when delays in processing occur. The use of EI values as a feedback mechanism is questioned.

How extreme is extreme hourly precipitation?

Science.gov (United States)

Papalexiou, Simon Michael; Dialynas, Yannis G.; Pappas, Christoforos

2016-04-01

The importance of accurate representation of precipitation at fine time scales (e.g., hourly), directly associated with flash flood events, is crucial in hydrological design and prediction. The upper part of a probability distribution, known as the distribution tail, determines the behavior of extreme events. In general, and loosely speaking, tails can be categorized in two families: the subexponential and the hyperexponential family, with the first generating more intense and more frequent extremes compared to the latter. In past studies, the focus has been mainly on daily precipitation, with the Gamma distribution being the most popular model. Here, we investigate the behaviour of tails of hourly precipitation by comparing the upper part of empirical distributions of thousands of records with three general types of tails corresponding to the Pareto, Lognormal, and Weibull distributions. Specifically, we use thousands of hourly rainfall records from all over the USA. The analysis indicates that heavier-tailed distributions describe better the observed hourly rainfall extremes in comparison to lighter tails. Traditional representations of the marginal distribution of hourly rainfall may significantly deviate from observed behaviours of extremes, with direct implications on hydroclimatic variables modelling and engineering design.

5 CFR 551.421 - Regular working hours.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Regular working hours. 551.421 Section... Activities § 551.421 Regular working hours. (a) Under the Act there is no requirement that a Federal employee... distinction based on whether the activity is performed by an employee during regular working hours or outside...

Long working hours and alcohol use

DEFF Research Database (Denmark)

Virtanen, Marianna; Jokela, Markus; Nyberg, Solja T

2015-01-01

.20) in the analysis of prospective published and unpublished data. In the 18 studies with individual participant data it was possible to assess the European Union Working Time Directive, which recommends an upper limit of 48 hours a week. Odds ratios of new onset risky alcohol use for those working 49-54 hours......OBJECTIVE: To quantify the association between long working hours and alcohol use. DESIGN: Systematic review and meta-analysis of published studies and unpublished individual participant data. DATA SOURCES: A systematic search of PubMed and Embase databases in April 2014 for published studies......, supplemented with manual searches. Unpublished individual participant data were obtained from 27 additional studies. REVIEW METHODS: The search strategy was designed to retrieve cross sectional and prospective studies of the association between long working hours and alcohol use. Summary estimates were...

Provisional PDF Published 25 may 2010 Research, Volume 5, Issue ...

African Journals Online (AJOL)

raoul

2010-05-25

May 25, 2010 ... BACKGROUND: Cultural means of pediatric treatment during ill health is a mainstay in Africa, and ... a four-month pregnancy, she drank only urine and water to stop the bleeding after six hours. ..... symptomatic bacteriuria.

IDENTIFICATIONS PEAK HOURS ON INTERSECTIONS SET IN BIELSKO-BIAŁA CITY

Directory of Open Access Journals (Sweden)

Marcin KŁOS

2016-03-01

Full Text Available Traffic flow in cities is usually examined locally. This method is not effective for through traffic analysis. The paper discusses the problem of determining peak traffic hours taking into account vehicle distributions. Peak hours represent time periods of traffic flow which demand special treatment by traffic control systems. This is particularly important in the case of ITS. High values of traffic flow require relieving actions not only at the junctions but preferably along the transit routes. The north-south transit route in Bielsko-Biała was chosen for analysis. Instead of the usual two distinct peaks it is determined that the traffic flow is characterised by five peaks. This pattern is the result of specific location of the route, which links residential areas, industrial zones and shopping centres besides carrying through traffic. This multi peak graph more accurately models the traffic flow.

The existence and persistence of long work hours

OpenAIRE

Drago, Robert William; Black, David; Wooden, Mark

2005-01-01

Previous research hypothesizes that long working hours are related to consumerism, the ideal worker norm, high levels of human capital, and a high cost-of-job-loss. The authors test these hypotheses using panel data on working hours for an Australian sample of full-time employed workers. Analyses include a static cross-sectional model and a persistence model for long hours over time. The results suggest that long hours (50 or more hours in a usual week) are often persistent, and provide stron...

Ability of a 5-minute electrocardiography (ECG) for predicting arrhythmias in Doberman Pinschers with cardiomyopathy in comparison with a 24-hour ambulatory ECG.

Science.gov (United States)

Wess, G; Schulze, A; Geraghty, N; Hartmann, K

2010-01-01

Ventricular premature contractions (VPCs) are common in the occult stage of cardiomyopathy in Doberman Pinschers. Although the gold standard for detecting arrhythmia is the 24-hour ambulatory electrocardiography (ECG) (Holter), this method is more expensive, time-consuming and often not as readily available as common ECG. Comparison of 5-minute ECGs with Holter examinations. Eight hundred and seventy-five 5-minute ECGs and Holter examinations of 431 Doberman Pinschers. Each examination included a 5-minute ECG and Holter examination. A cut-off value of > 100 VPCs/24 hours using Holter was considered diagnostic for the presence of cardiomyopathy. Statistical evaluation included calculation of sensitivity, specificity, positive predictive value, and negative predictive value. Holter examinations revealed > 100 VPCs/24 hours in 204/875 examinations. At least 1 VPC during a 5-minute ECG was detected in 131 (64.2%) of these 204 examinations. No VPCs were found in the 5-minute ECG in 73 (35.8%) examinations of affected Doberman Pinschers. A 5-minute ECG with at least 1 VPC as cut-off had a sensitivity of 64.2%, a specificity of 96.7%, a positive predictive value of 85.6% and a negative predictive value of 89.9% for the presence of > 100 VPCs/24 hours. A 5-minute ECG is a rather insensitive method for detecting arrhythmias in Doberman Pinschers. However, the occurrence of at least 1 VPC in 5 minutes strongly warrants further examination of the dog, because specificity (96.7%) and positive predictive value (85.6%) are high and could suggest occult cardiomyopathy.

19 CFR 101.6 - Hours of business.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Hours of business. 101.6 Section 101.6 Customs... GENERAL PROVISIONS § 101.6 Hours of business. Except as specified in paragraphs (a) through (g) of this section, each CBP office shall be open for the transactions of general CBP business between the hours of 8...

The future of work hours--the European view.

Science.gov (United States)

Akerstedt, Torbjörn; Kecklund, Göran

2005-01-01

In Europe the way work hours are handled varies between different countries. However, there are some issues that dominate the discussion in Europe and seem representative for what is happening. One such is the reduction of working hours--which was attempted in several countries but which now seems to be backfiring--probably related to the competition from countries outside Europe. Another area is compressed work hours--the drive towards maximizing the hours per work day in order to increase the number of days off. The health effects are debated--some find clear positive effects. A third area is company oriented flexible work hours, permitting the employer to make moderate changes in work hours when needed. The health impacts have not been evaluated but the loss of individual influence at work is obvious. In some parts of Europe self-determined work hours have been tried with very positive effects. The EU work hour directive is intended to provide uniformity but permits a counterproductive "opting out", creating problems of imbalance.

Employees' use of social media for private reasons during working hours

Science.gov (United States)

Gunnlaugsdottir, Johanna

2015-02-01

The objectives of the study were to find out: Whether Icelandic organizations allowed open access to social media (SM), whether the respondents used SM for private reasons during working hours, which SM they used, how much time they devoted to such use, and what was the attitude of managers and the employees themselves towards such use. The respondents were asked to disclose whether they worked in the private or the public sector and the type of organization that they worked for. This was a two-dimensional study: A questionnaire sent to an internet panel and a telephone survey both based on a random sample selected from the National Registry in February 2013. A similar study has not been performed in Iceland before. Foreign studies of the same nature are not known, only related research. The main findings were that about half of the organizations allowed open access to SM, just below 50% of respondents took advantage of SM for personal use during working hours and the great majority used Facebook. Employees used a considerable part of their working hours for personal use of SM. The majority of respondents were of the opinion that managers objected to the use of SM during working hours and a larger majority believed that such use of themselves was unacceptable. The survey adds valuable information for a better understanding of the status of SM at places of work. The results could be of value to organizations that want to evaluate the pros and cons of SM for the organization.

ISSN 2073-9990 East Cent Afr J Surg

African Journals Online (AJOL)

Ileosigmoid knotting in pregnancy: A case report from Zimbabwe ... and who underwent an emergency laparotomy during which a diagnosis of ISK was made. ... Reassessment of the patient after a few hours revealed a marked clinical ... This patient had a provisional diagnosis of sigmoid volvulus without peritonitis.

Hourly cooling load prediction of a vehicle in the southern region of Turkey by Artificial Neural Network

International Nuclear Information System (INIS)

Solmaz, Ozgur; Ozgoren, Muammer; Aksoy, Muharrem Hilmi

2014-01-01

Highlights: • An ANN model was developed to predict hourly cooling load of a vehicle. • Hourly meteorological data of 5 different provinces was used. • The agreement of the cooling load values between the calculations and predictions was fairly promising. • The ANN model could be successfully used to design automotive air conditioning systems. - Abstract: In this study, Artificial Neural Networks (ANNs) method for prediction hourly cooling load of a vehicle was implemented. The cooling load of the vehicle was calculated along the cooling season (1 May–30 September) for Antalya, Konya, Mersin, Mugla and Sanliurfa provinces in Turkey. For ANN model, seven neurons determinated as input signals of latitude, longitude, altitude, day of the year, hour of the day, hourly mean ambient air temperature and hourly solar radiation were used for the input layer of the network. One neuron producing an output signal of the hourly cooling load was utilized in the output layer. All data were divided into two categories for training and testing of the ANN. The 80% of the data was reserved to training and the remaining was used for testing of the model. Neuron numbers in the hidden layer from 7 to 40 were tested step by step to find the best matching ANN structure. The obtained results for different numbers of neurons were compared in terms of root mean squared error (RMSE), coefficient of determination (R 2 ) and mean absolute error (MAE). The best matching results for the training and testing were obtained as 8 neurons for the minimum testing RMSE value for the prediction of cooling load by the ANN model on the 23rd day of each month along the cooling season. For the model with 8 neurons RMSE, R 2 and MAE (Training/Testing) were found to be 0.0128/0.0259, 0.9959/0.9818 and 78.81/174.71 W/m 2 , respectively. It is shown that the cooling load of a vehicle can be successfully predicted by means of the ANNs from geographical characteristics and meteorological data

Generation of global hourly radiation sequences using a Transition Markov matrix for Madrid. Generacion de secuencias horarias de radiacion global utilizando matrices de transicion de Markov, para la localidad de Madrid

Energy Technology Data Exchange (ETDEWEB)

Mora, Ll

1989-11-01

The aim of this work is the generation of sequences of hourly global radiation which have similar statistically characteristics of real sequences for the city of Madrid (Spain). For this generation, a first order Markov model has been proposed. The input parameters of simulation method are the following: The maximum value of hourly radiation and the average monthly value of the transparency normalized index. The maximum value of hourly radiation has been calculated as a function of the solar height by an empirical expression. The transparency normalized index has been defined as the ratio among the measured hourly global radiation to the maximum value for the corresponding solar height. The method is based on the following observations: -The transparency normalized index shows a significant correlation only for two consecutive hours. -The months with the same average transparency normalized indies have similar probability density function. Global solar radiation, time series, simulation, Markov transition matrix, solar energy.

Value-based resource management: a model for best value nursing care.

Science.gov (United States)

Caspers, Barbara A; Pickard, Beth

2013-01-01

With the health care environment shifting to a value-based payment system, Catholic Health Initiatives nursing leadership spearheaded an initiative with 14 hospitals to establish best nursing care at a lower cost. The implementation of technology-enabled business processes at point of care led to a new model for best value nursing care: Value-Based Resource Management. The new model integrates clinical patient data from the electronic medical record and embeds the new information in care team workflows for actionable real-time decision support and predictive forecasting. The participating hospitals reported increased patient satisfaction and cost savings in the reduction of overtime and improvement in length of stay management. New data generated by the initiative on nursing hours and cost by patient and by population (Medicare severity diagnosis-related groups), and patient health status outcomes across the acute care continuum expanded business intelligence for a value-based population health system.

Effectiveness of the Twelve-Hour Shift.

Science.gov (United States)

Brinton, Robert D.

1983-01-01

Although labor unions traditionally have fought for shorter working hours, there have been recent reversals in this trend. The Pulp and Paperboard Division of Temple-Eastex Incorporated converted to a 12-hour shift and found that safety improved, productivity increased, and overtime decreased. (JOW)

Diagnostic value and cost-benefit analysis of 24?hours ambulatory blood pressure monitoring in primary care in Portugal

OpenAIRE

Pessanha, Paulo; Viana, Manuel; Ferreira, Paula; Bertoquini, Susana; Pol?nia, Jorge

2013-01-01

Background Hypertensive patients (HTs) are usually attended in primary care (PC). We aimed to assess the diagnostic accuracy and cost-benefit ratio of 24-hour ambulatory blood pressure monitoring (ABPM) in all newly diagnosed hypertensive patients (HTs) attended in PC. Methods In a cross-sectional study ABPM was recorded in all 336 never treated HTs (Office BP ?140 and/or???90?mm Hg) that were admitted during 16?months. Since benefits from drug treatment in white-coat hypertension (WCH) remai...

Hourly awakening vs continuous contact lens sensor measurements of 24-hour intraocular pressure: effect on sleep macrostructure and intraocular pressure rhythm.

Science.gov (United States)

Aptel, Florent; Tamisier, Renaud; Pépin, Jean-Louis; Mottet, Benjamin; Hubanova, Ralitsa; Romanet, Jean-Paul; Chiquet, Christophe

2014-10-01

All studies of 24-hour intraocular pressure (IOP) rhythm conducted to date have used repeated IOP measurements requiring nocturnal awakenings, potentially disturbing sleep macrostructure. To evaluate the effects on sleep architecture and IOP rhythm of hourly awakening vs a contact lens sensor (CLS) to continuously monitor IOP without awakening. Cross-sectional study at a referral center of chronobiology among 12 young healthy volunteers, with a mean (SD) age of 22.3 (2.3) years. Volunteers underwent two 24-hour IOP measurement sessions during a 2-month period. The eye order and session order were randomized. During one session, the IOP of the first eye was continuously monitored using a CLS, and the IOP of the fellow eye was measured hourly using a portable noncontact tonometer (session with nocturnal hourly awakening). During the other session, the IOP of the first eye was continuously monitored using a CLS, and the IOP of the fellow eye was not measured (session without nocturnal awakening). Overnight polysomnography was performed during the 2 sessions. A nonlinear least squares, dual-harmonic regression analysis was used to model the 24-hour IOP rhythm from the CLS data. Comparisons of acrophase, bathyphase, amplitude, and the midline estimating statistic of rhythm were used to evaluate the effect of hourly awakening on IOP rhythm. To evaluate the effects of hourly awakening on sleep architecture, comparisons of sleep structure were used, including total sleep period, rapid eye movement, wake after sleep onset, absolute and relative total sleep time, and non-rapid eye movement sleep (N1, N2, and N3). A 24-hour IOP rhythm was found in all individuals for the sessions with and without awakening (P  .30). Hourly awakening during noncontact tonometer IOP measurements did not seem to alter the mean variables of the 24-hour IOP pattern evaluated using CLS, including signal, maximum signal, minimum signal, acrophase, and bathyphase (P > .15). The 24-hour IOP

Immediate provisionalization in the esthetic zone: 1-year interim results from a prospective single-cohort multicenter study evaluating 3.0-mm-diameter tapered implants.

Science.gov (United States)

Kolinski, Martin; Hess, Pablo; Leziy, Sonia; Friberg, Bertil; Bellucci, Gionata; Trisciuoglio, Davide; Wagner, Wilfried; Moergel, Maximilian; Pozzi, Alessandro; Wiltfang, Jörg; Behrens, Eleonore; Zechner, Werner; Vasak, Christoph; Weigl, Paul

2018-07-01

The aim of this interim analysis of a 5-year prospective multicenter study is to evaluate clinical and radiological performance of immediately provisionalized 3.0-mm-diameter tapered implants. Patients needing implant rehabilitation of maxillary lateral incisors or mandibular lateral and central incisors were treated with 3.0-mm-diameter implants placed in extraction or healed sites and immediately provisionalized. Clinical and radiographic examinations were performed at implant insertion, 6 months thereafter, and are ongoing. Marginal bone levels and changes, complications, the papilla, plaque, and bleeding indices, and the pink esthetic score (PES) were evaluated at each follow-up visit. Of 112 enrolled patients, 77 patients (91 implants) met the inclusion criteria. Seventy-one patients with 82 implants completed the 1-year follow-up. Three implants failed yielding a CSR of 96.7%. All failures occurred within the first 3 months after implant insertion. Marginal bone level changes from insertion to 6 months was - 0.57 ± 1.30 mm (n = 75) and from insertion to 12 months - 0.25 ± 1.38 mm (n = 72). Fifteen non-serious complications were recorded. Papilla index score and PES improved at the 1-year follow-up. Plaque formation and bleeding-on-probing showed no statistically significant differences between the 6-month and the 1-year visit. This 1-year analysis demonstrated high survival, stable bone levels, and healthy soft tissue with 3.0-mm-diameter implants. Narrow diameter implants are a safe and predictable treatment option in patients with limited bone volume and/or limited interdental space and eligible for immediate loading protocols.

Use and Underlying Reasons for Duty Hour Flexibility in the Flexibility in Duty Hour Requirements for Surgical Trainees (FIRST) Trial.

Science.gov (United States)

Bilimoria, Karl Y; Quinn, Christopher M; Dahlke, Allison R; Kelz, Rachel R; Shea, Judy A; Rajaram, Ravi; Love, Remi; Kreutzer, Lindsey; Biester, Thomas; Yang, Anthony D; Hoyt, David B; Lewis, Frank R

2017-02-01

The Flexibility in Duty Hour Requirements for Surgical Trainees (FIRST) Trial randomly assigned surgical residency programs to either standard duty hour policies or flexible policies that eliminated caps on shift lengths and time off between shifts. Our objectives were to assess adherence to duty hour requirements in the Standard Policy arm and examine how often and why duty hour flexibility was used in the Flexible Policy arm. A total of 3,795 residents in the FIRST trial completed a survey in January 2016 (response rate >95%) that asked how often and why they exceeded current standard duty hour limits in both study arms. Flexible Policy interns worked more than 16 hours continuously at least once in a month more frequently than Standard Policy residents (86% vs 37.8%). Flexible Policy residents worked more than 28 hours once in a month more frequently than Standard Policy residents (PGY1: 64% vs 2.9%; PGY2 to 3: 62.4% vs 41.9%; PGY4 to 5: 52.2% vs 36.6%), but this occurred most frequently only 1 to 2 times per month. Although residents reported working more than 80 hours in a week 3 or more times in the most recent month more frequently under Flexible Policy vs Standard Policy (19.9% vs 16.2%), the difference was driven by interns (30.9% vs 19.6%), and there were no significant differences in exceeding 80 hours among PGY2 to 5 residents. The most common reasons reported for extending duty hours were facilitating care transitions (76.6%), stabilizing critically ill patients (70.7%), performing routine responsibilities (67.9%), and operating on patients known to the trainee (62.0%). There were differences in duty hours worked by residents in the Flexible vs Standard Policy arms of the FIRST trial, but it appeared that residents generally used the flexibility for patient care and educational opportunities selectively. Copyright © 2016 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

Hours Constraints Within and Between Jobs

NARCIS (Netherlands)

Euwals, R.W.

1997-01-01

In the empirical literature on labour supply, several models are developed to incorporate constraints on working hours. These models do not address the question to which extent working hours are constrained within and between jobs. In this paper I investigate the effect of individual changes in

Employer Attitudes towards Peak Hour Avoidance

NARCIS (Netherlands)

Vonk Noordegraaf, D.M.; Annema, J.A.

2012-01-01

Peak Hour Avoidance is a relatively new Dutch mobility management measure. To reduce congestion frequent car drivers are given a financial reward for reducing the proportion of trips that they make during peak hours on a specific motorway section. Although previous studies show that employers are

Employer attitudes towards peak hour avoidance

NARCIS (Netherlands)

Noordegraaf, D.M.V.; Annema, J.A.

2012-01-01

Peak Hour Avoidance is a relatively new Dutch mobility management measure. To reduce congestion frequent car drivers are given a financial reward for reducing the proportion of trips that they make during peak hours on a specific motorway section. Although previous studies show that employers are

Cost-efficient staffing under annualized hours

NARCIS (Netherlands)

van der Veen, Egbert; Hans, Elias W.; Veltman, Bart; Berrevoets, Leo M.; Berden, Hubert J.J.M.

2012-01-01

We study how flexibility in workforce capacity can be used to efficiently match capacity and demand. Flexibility in workforce capacity is introduced by the annualized hours regime. Annualized hours allow organizations to measure working time per year, instead of per month or per week. An additional

The Credit Hour and Public Budgeting.

Science.gov (United States)

Wellman, Jane V.

2003-01-01

Discusses the ways the credit hour has come to be used by public funding systems in higher education. The literature review shows that the credit hour has become a barrier to innovation and a way to create systemic inequities between institutions or sectors in resource allocation. (SLD)

5 CFR 610.408 - Use of credit hours.

Science.gov (United States)

2010-01-01

... Flexible and Compressed Work Schedules § 610.408 Use of credit hours. Members of the Senior Executive Service (SES) may not accumulate credit hours under an alternative work schedule. Any credit hours...

Association between sleeping hours, working hours and obesity in Hong Kong Chinese: the 'better health for better Hong Kong' health promotion campaign.

Science.gov (United States)

Ko, G T C; Chan, J C N; Chan, A W Y; Wong, P T S; Hui, S S C; Tong, S D Y; Ng, S-M; Chow, F; Chan, C L W

2007-02-01

To study the inter-relationships between sleeping hours, working hours and obesity in subjects from a working population. A cross-sectional observation study under the 'Better Health for Better Hong Kong' Campaign, which is a territory-wide health awareness and promotion program. 4793 subjects (2353 (49.1%) men and 2440 (50.9%) women). Their mean age (+/-s.d.) was 42.4+/-8.9 years (range 17-83 years, median 43.0 years). Subjects were randomly selected using computer-generated codes in accordance to the distribution of occupational groups in Hong Kong. The mean daily sleeping time was 7.06+/-1.03 h (women vs men: 7.14+/-1.08 h vs 6.98+/-0.96 h, Pworking hours reaching significance in the whole group as well as among male subjects. Those with short sleeping hour (6 h or less) and long working hours (>9 h) had the highest BMI and waist in both men and women. Based on multiple regression analysis with age, smoking, alcohol drinking, systolic and diastolic blood pressure, mean daily sleeping hours and working hours as independent variables, BMI was independently associated with age, systolic and diastolic blood pressure in women, whereas waist was associated with age, smoking and blood pressure. In men, blood pressure, sleeping hours and working hours were independently associated with BMI, whereas waist was independently associated with age, smoking, blood pressure, sleeping hours and working hours in men. Obesity is associated with reduced sleeping hours and long working hours in men among Hong Kong Chinese working population. Further studies are needed to investigate the underlying mechanisms of this relationship and its potential implication on prevention and management of obesity.

Second-Line Hormonal Therapy for Men With Chemotherapy-Naïve, Castration-Resistant Prostate Cancer: American Society of Clinical Oncology Provisional Clinical Opinion.

Science.gov (United States)

Virgo, Katherine S; Basch, Ethan; Loblaw, D Andrew; Oliver, Thomas K; Rumble, R Bryan; Carducci, Michael A; Nordquist, Luke; Taplin, Mary-Ellen; Winquist, Eric; Singer, Eric A

2017-06-10

Purpose ASCO provisional clinical opinions (PCOs) offer direction to the ASCO membership after publication or presentation of potential practice-changing data. This PCO addresses second-line hormonal therapy for chemotherapy-naïve men with castration-resistant prostate cancer (CRPC) who range from being asymptomatic with only biochemical evidence of CRPC to having documented metastases but minimal symptoms. Clinical Context The treatment goal for CRPC is palliation. Despite resistance to initial androgen deprivation therapy, most men respond to second-line hormonal therapies. However, guidelines have neither addressed second-line hormonal therapy for nonmetastatic CRPC nor provided specific guidance with regard to the chemotherapy-naïve population. Recent Data Six phase III randomized controlled trials and expert consensus opinion inform this PCO. Provisional Clinical Opinion For men with CRPC, a castrate state should be maintained indefinitely. Second-line hormonal therapy (eg, antiandrogens, CYP17 inhibitors) may be considered in patients with nonmetastatic CRPC at high risk for metastatic disease (rapid prostate-specific antigen doubling time or velocity) but otherwise is not suggested. In patients with radiographic evidence of metastases and minimal symptoms, enzalutamide or abiraterone plus prednisone should be offered after discussion with patients about potential harms, benefits, costs, and patient preferences. Radium-223 and sipuleucel-T also are options. No evidence provides guidance about the optimal order of hormonal therapies for CRPC beyond second-line treatment. Prostate-specific antigen testing every 4 to 6 months is reasonable for men without metastases. Routine radiographic restaging generally is not suggested but can be considered for patients at risk for metastases or who exhibit symptoms or other evidence of progression. Additional information is available at www.asco.org/genitourinary-cancer-guidelines and www.asco.org/guidelineswiki .

Transcutaneous Bilirubin Nomogram for Healthy Term and Late Preterm Neonates in First 96 Hours of Life.

Science.gov (United States)

Thakkar, Pareshkumar; Chavda, Hardas; Doshi, Vikas

2017-05-15

To develop nomogram of Transcutaneous Bilirubin among healthy term and late-preterm neonates during first 96 hours of age. Longitudinal observational study. Neonatal unit of a tertiary care Hospital of Central Gujarat, India. 1075 healthy term and late preterm neonates (≥35weeks). Six-hourly transcutaneous bilirubin was obtained from birth to 96 hour of life using Drager JM 103 Transcutaneous Bilirubinometer. Main outcome measures: Nomogram of Transcutaneous Bilirubin with percentile values was obtained, rate of rise of bilirubin was calculated and predictive ability of normative data was analyzed for subsequent need of phototherapy. The age-specific percentile curves and nomogram were developed from the transcutaneous bilirubin readings of 1,010 neonates. Rate of rise in first 12 hour was 0.2 mg/dL and was 0.17 mg/dL in 12 to 24 hour of life which decreased on second day of life. Neonates who required phototherapy had consistently higher readings of transcutaneous bilirubin and also higher rate of rise in first 48 hrs. Neonates whose transcutaneous bilirubin is above the 50th percentile should be monitored for the development of significant hyperbilirubinemia.

Construction-man hour estimation for nuclear power plants

International Nuclear Information System (INIS)

Paek, J.H.

1987-01-01

This study centers on a statistical analysis of the preliminary construction time, main construction time, and total construction man hours of nuclear power plants. The use of these econometric techniques allows the major man hour driving variables to be identified through multivariate analysis of time-series data on over 80 United States nuclear power plants. The analysis made in this study provides a clearer picture of the dynamic changes that have occurred in the man hours of these plants when compared to engineering estimates of man hours, and produces a tool that can be used to project nuclear power plant man hours

17 CFR 201.104 - Business hours.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Business hours. 201.104 Section 201.104 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION RULES OF PRACTICE Rules of Practice General Rules § 201.104 Business hours. The Headquarters office of the Commission, at...

Experience With Flexible Hours of Work

Science.gov (United States)

Hartley, Jo

1976-01-01

A summary of an 80-page booklet called Hours of Work When Workers Can Choose is presented. The booklet reports a survey and focuses on the benefits of flexible hours of work. It was published by the Business and Professional Women's Foundation and is available from that organization. (EC)

Six-Hours-Rule - A Dogma for Military Surgery?

National Research Council Canada - National Science Library

Gerngross, Heinz; Kahle, Wilhelm

2004-01-01

Today, the six-hours-rule is a delicate item for military logistics and it is a great challenge for medical services to provide an adequate treatment during the first hours after wounding. DEFINITION: Six-hour-rule...

"Hour of Code": A Case Study

Science.gov (United States)

Du, Jie; Wimmer, Hayden; Rada, Roy

2018-01-01

This study investigates the delivery of the "Hour of Code" tutorials to college students. The college students who participated in this study were surveyed about their opinion of the Hour of Code. First, the students' comments were discussed. Next, a content analysis of the offered tutorials highlights their reliance on visual…

Changing the Formula of Residents' Work Hours in Internal Medicine: Moving From “Years in Training” to “Hours in Training”

Science.gov (United States)

Mansi, Ishak A

2011-01-01

Background In a recent report, the Institute of Medicine recommended more restrictions on residents' working hours. Several problems exist with a system that places a weekly limit on resident duty hours: (1) it assumes the presence of a linear relationship between hours of work and patient safety; (2) it fails to consider differences in intensity among programs; and (3) it does not address increases in the scientific content of medicine, and it places the burden of enforcing the duty hour limits on the Accreditation Council for Graduate Medical Education. Proposal An innovative method of calculating credit hours for graduate medical education would shift the focus from “years of residency” to “hours of residency.” For example, internal medicine residents would be requested to spend 8640 hours of total training hours (assuming 60 hours per week for 48 weeks annually) instead of the traditional 3 years. This method of counting training hours is used by other professions, such as the Intern Development Program of the National Council of Architectural Registration Boards. The proposed approach would allow residents and program directors to pace training based on individual capabilities. Standards for resident education should include the average number of patients treated in each setting (inpatient or outpatient). A possible set of “multipliers” based on these parameters, and possibly others such as resident evaluation, is devised to calculate the “final adjusted accredited hours” that count toward graduation. Anticipated Benefits Substituting “years of training” with “hours of training” may resolve many of the concerns with the current residency education model, as well as adapt to the demands of residents' personal lives. It also may allow residents to pace their training according to their capabilities and learning styles, and contribute to reflective learning and better quality education. PMID:22379516

Prediction of outcome in neurogenic oropharyngeal dysphagia within 72 hours of acute stroke.

Science.gov (United States)

Ickenstein, Guntram W; Höhlig, Carolin; Prosiegel, Mario; Koch, Horst; Dziewas, Rainer; Bodechtel, Ulf; Müller, Rainer; Reichmann, Heinz; Riecker, Axel

2012-10-01

Stroke is the most frequent cause of neurogenic oropharyngeal dysphagia (NOD). In the acute phase of stroke, the frequency of NOD is greater than 50% and, half of this patient population return to good swallowing within 14 days while the other half develop chronic dysphagia. Because dysphagia leads to aspiration pneumonia, malnutrition, and in-hospital mortality, it is important to pay attention to swallowing problems. The question arises if a prediction of severe chronic dysphagia is possible within the first 72 hours of acute stroke. On admission to the stroke unit, all stroke patients were screened for swallowing problems by the nursing staff within 2 hours. Patients showing signs of aspiration were included in the study (n = 114) and were given a clinical swallowing examination (CSE) by the swallowing/speech therapist within 24 hours and a swallowing endoscopy within 72 hours by the physician. The primary outcome of the study was the functional communication measure (FCM) of swallowing (score 1-3, tube feeding dependency) on day 90. The grading system with the FCM swallowing and the penetration-aspiration scale (PAS) in the first 72 hours was tested in a multivariate analysis for its predictive value for tube feeding-dependency on day 90. For the FCM level 1 to 3 (P dysphagia scales to prevent aspiration pneumonia and malnutrition. A dysphagia program can lead to better communication within the stroke unit team to initiate the appropriate diagnostics and swallowing therapy as soon as possible. Copyright © 2012 National Stroke Association. Published by Elsevier Inc. All rights reserved.

Flexible forms of working hours

OpenAIRE

Knapp, Viktor

2017-01-01

66 Abstract - Flexible forms of working hours This diploma thesis deals with the flexible forms of working hours and its goal is to describe this issue in intelligible and comprehensive way. It is being very interesting and current theme which is to a great extent not subject to direct legal regulations and provides its contracting parties with a big amount of freedom of contract. This fact assists in bigger flexibilization of labour market and represents a significant instrument in the fight...

Disaggregation of Rainy Hours: Compared Performance of Various Models.

Science.gov (United States)

Ben Haha, M.; Hingray, B.; Musy, A.

In the urban environment, the response times of catchments are usually short. To de- sign or to diagnose waterworks in that context, it is necessary to describe rainfall events with a good time resolution: a 10mn time step is often necessary. Such in- formation is not always available. Rainfall disaggregation models have thus to be applied to produce from rough rainfall data that short time resolution information. The communication will present the performance obtained with several rainfall dis- aggregation models that allow for the disaggregation of rainy hours into six 10mn rainfall amounts. The ability of the models to reproduce some statistical character- istics of rainfall (mean, variance, overall distribution of 10mn-rainfall amounts; ex- treme values of maximal rainfall amounts over different durations) is evaluated thanks to different graphical and numerical criteria. The performance of simple models pre- sented in some scientific papers or developed in the Hydram laboratory as well as the performance of more sophisticated ones is compared with the performance of the basic constant disaggregation model. The compared models are either deterministic or stochastic; for some of them the disaggregation is based on scaling properties of rainfall. The compared models are in increasing complexity order: constant model, linear model (Ben Haha, 2001), Ormsbee Deterministic model (Ormsbee, 1989), Ar- tificial Neuronal Network based model (Burian et al. 2000), Hydram Stochastic 1 and Hydram Stochastic 2 (Ben Haha, 2001), Multiplicative Cascade based model (Olsson and Berndtsson, 1998), Ormsbee Stochastic model (Ormsbee, 1989). The 625 rainy hours used for that evaluation (with a hourly rainfall amount greater than 5mm) were extracted from the 21 years chronological rainfall series (10mn time step) observed at the Pully meteorological station, Switzerland. The models were also evaluated when applied to different rainfall classes depending on the season first and on the

Technical results of the French electricity supply industry 2002; Resultats techniques du secteur electrique en France 2002

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

Provisional detailed results of power flows in France in 2002, with the operating context and international comparisons. This booklet presents provisional results, expressed in rounded values because of some estimated values. Data come from measures made by RTE, completed by various actors of the power system and by estimations made by RTE: general results France; operation outlook; energy flows; exchanges with foreign countries; French consumption; French generation; network operation; access to the transmission network; development over the past 15 years; international comparisons; terminology.

Technical results of the French electricity supply industry 2002

International Nuclear Information System (INIS)

2002-01-01

Provisional detailed results of power flows in France in 2002, with the operating context and international comparisons. This booklet presents provisional results, expressed in rounded values because of some estimated values. Data come from measures made by RTE, completed by various actors of the power system and by estimations made by RTE: general results France; operation outlook; energy flows; exchanges with foreign countries; French consumption; French generation; network operation; access to the transmission network; development over the past 15 years; international comparisons; terminology

Technical results of the power sector in France 2001; Resultats techniques du secteur electrique en France 2001

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

Provisional detailed results of power flows in France in 2002, with the operating context and international comparisons. This booklet presents provisional results, expressed in rounded values because of some estimated values. Data come from measures made by RTE, completed by various actors of the power system and by estimations made by RTE: general results France; operation outlook; energy flows; exchanges with foreign countries; French consumption; French generation; network operation; access to the transmission network; development over the past 15 years; international comparisons; terminology.

Double Kissing Crush Versus Provisional Stenting for Left Main Distal Bifurcation Lesions: DKCRUSH-V Randomized Trial.

Science.gov (United States)

Chen, Shao-Liang; Zhang, Jue-Jie; Han, Yaling; Kan, Jing; Chen, Lianglong; Qiu, Chunguang; Jiang, Tiemin; Tao, Ling; Zeng, Hesong; Li, Li; Xia, Yong; Gao, Chuanyu; Santoso, Teguh; Paiboon, Chootopol; Wang, Yan; Kwan, Tak W; Ye, Fei; Tian, Nailiang; Liu, Zhizhong; Lin, Song; Lu, Chengzhi; Wen, Shangyu; Hong, Lang; Zhang, Qi; Sheiban, Imad; Xu, Yawei; Wang, Lefeng; Rab, Tanveer S; Li, Zhanquan; Cheng, Guanchang; Cui, Lianqun; Leon, Martin B; Stone, Gregg W

2017-11-28

Provisional stenting (PS) is the most common technique used to treat distal left main (LM) bifurcation lesions in patients with unprotected LM coronary artery disease undergoing percutaneous coronary intervention. The double kissing (DK) crush planned 2-stent technique has been shown to improve clinical outcomes in non-LM bifurcations compared with PS, and in LM bifurcations compared with culotte stenting, but has never been compared with PS in LM bifurcation lesions. The authors sought to determine whether a planned DK crush 2-stent technique is superior to PS for patients with true distal LM bifurcation lesions. The authors randomized 482 patients from 26 centers in 5 countries with true distal LM bifurcation lesions (Medina 1,1,1 or 0,1,1) to PS (n = 242) or DK crush stenting (n = 240). The primary endpoint was the 1-year composite rate of target lesion failure (TLF): cardiac death, target vessel myocardial infarction, or clinically driven target lesion revascularization. Routine 13-month angiographic follow-up was scheduled after ascertainment of the primary endpoint. TLF within 1 year occurred in 26 patients (10.7%) assigned to PS, and in 12 patients (5.0%) assigned to DK crush (hazard ratio: 0.42; 95% confidence interval: 0.21 to 0.85; p = 0.02). Compared with PS, DK crush also resulted in lower rates of target vessel myocardial infarction I (2.9% vs. 0.4%; p = 0.03) and definite or probable stent thrombosis (3.3% vs. 0.4%; p = 0.02). Clinically driven target lesion revascularization (7.9% vs. 3.8%; p = 0.06) and angiographic restenosis within the LM complex (14.6% vs. 7.1%; p = 0.10) also tended to be less frequent with DK crush compared with PS. There was no significant difference in cardiac death between the groups. In the present multicenter randomized trial, percutaneous coronary intervention of true distal LM bifurcation lesions using a planned DK crush 2-stent strategy resulted in a lower rate of TLF at 1 year than a PS�

pH-Dependent solubility and permeability criteria for provisional biopharmaceutics classification (BCS and BDDCS) in early drug discovery.

Science.gov (United States)

Varma, Manthena V; Gardner, Iain; Steyn, Stefanus J; Nkansah, Paul; Rotter, Charles J; Whitney-Pickett, Carrie; Zhang, Hui; Di, Li; Cram, Michael; Fenner, Katherine S; El-Kattan, Ayman F

2012-05-07

The Biopharmaceutics Classification System (BCS) is a scientific framework that provides a basis for predicting the oral absorption of drugs. These concepts have been extended in the Biopharmaceutics Drug Disposition Classification System (BDDCS) to explain the potential mechanism of drug clearance and understand the effects of uptake and efflux transporters on absorption, distribution, metabolism, and elimination. The objective of present work is to establish criteria for provisional biopharmaceutics classification using pH-dependent passive permeability and aqueous solubility data generated from high throughput screening methodologies in drug discovery settings. The apparent permeability across monolayers of clonal cell line of Madin-Darby canine kidney cells, selected for low endogenous efflux transporter expression, was measured for a set of 105 drugs, with known BCS and BDDCS class. The permeability at apical pH 6.5 for acidic drugs and at pH 7.4 for nonacidic drugs showed a good correlation with the fraction absorbed in human (Fa). Receiver operating characteristic (ROC) curve analysis was utilized to define the permeability class boundary. At permeability ≥ 5 × 10(-6) cm/s, the accuracy of predicting Fa of ≥ 0.90 was 87%. Also, this cutoff showed more than 80% sensitivity and specificity in predicting the literature permeability classes (BCS), and the metabolism classes (BDDCS). The equilibrium solubility of a subset of 49 drugs was measured in pH 1.2 medium, pH 6.5 phosphate buffer, and in FaSSIF medium (pH 6.5). Although dose was not considered, good concordance of the measured solubility with BCS and BDDCS solubility class was achieved, when solubility at pH 1.2 was used for acidic compounds and FaSSIF solubility was used for basic, neutral, and zwitterionic compounds. Using a cutoff of 200 μg/mL, the data set suggested a 93% sensitivity and 86% specificity in predicting both the BCS and BDDCS solubility classes. In conclusion, this study identified

A measure for provisional-and-urgent sanitary improvement in developing countries: septic-tank performance improvement.

Science.gov (United States)

Harada, H; Dong, N T; Matsui, S

2008-01-01

Although many cities have planed to develop sewerages in developing countries, sewerage establishment still requires huge investment and engineering efforts. Improvement of existing sanitation facilities may contribute the betterment of urban sanitation before sewerage establishment. The purpose of this study is to propose a measure to improve urban sanitation in areas where a sewerage development plan is proposed but has not been yet established, based on a case study in Hanoi, Vietnam. We found that 90.5% of human excreta flowed into septic tanks. However, 89.6% of septic tanks have never been desludged in the past and their performance was observed to be at a low level. The study also showed that if they introduce regular desludging with a frequency of once a year, they can eliminate 72.8% of COD loads from septic tanks. It was indicated that the performance can be dramatically recovered by regular desludging, which could contribute urban sanitation improvement in Hanoi. In conclusion, the performance recovery of septic tanks by regular desludging was proposed as a provisional-and-urgent measure for urban sanitation improvement, together with the septage treatment in sewage sludge treatment facilities, which should be established earlier than other facilities of sewage treatment systems. IWA Publishing 2008.

Liquid-containing Refluxes and Acid Refluxes May Be Less Frequent in the Japanese Population Than in Other Populations: Normal Values of 24-hour Esophageal Impedance and pH Monitoring

Science.gov (United States)

Kawamura, Osamu; Kohata, Yukie; Kawami, Noriyuki; Iida, Hiroshi; Kawada, Akiyo; Hosaka, Hiroko; Shimoyama, Yasuyuki; Kuribayashi, Shiko; Fujiwara, Yasuhiro; Iwakiri, Katsuhiko; Inamori, Masahiko; Kusano, Motoyasu; Hongo, Micho

2016-01-01

Background/Aims Twenty-four-hour esophageal impedance and pH monitoring allows detection of all types of reflux episodes and is considered the best technique for identifying gastroesophageal refluxes. However, normative data for the Japanese population are lacking. This multicenter study aimed to establish the normal range of 24-hour esophageal impedance and pH data both in the distal and the proximal esophagus in Japanese subjects. Methods Forty-two healthy volunteers (25 men and 17 women) with a mean ± standard deviation age of 33.3 ± 12.4 years (range: 22–72 years) underwent a combined 24-hour esophageal impedance and pH monitoring. According to the physical and pH properties, distal or proximal esophageal reflux events were categorized. Results Median 45 reflux events occurred in 24 hours, and the 95th percentile was 85 events. Unlike previous reports, liquid-containing reflux events are median 25/24 hours with the 95th percentile of 62/24 hours. Acidic reflux events were median 11/24 hours with the 95th percentile of 39/24 hours. Non-acidic gas reflux events were median 15/24 hours with the 95th percentile of 39/24 hours. Proximal reflux events accounted for 80% of the total reflux events and were mainly non-acidic gas refluxes. About 19% of liquid and mixed refluxes reached the proximal esophagus. Conclusions Unlike previous studies, liquid-containing and acidic reflux events may be less frequent in the Japanese population. Non-acidic gas reflux events may be frequent and a cause of frequent proximal reflux events. This study provides important normative data for 24-hour impedance and pH monitoring in both the distal and the proximal esophagus in the Japanese population. PMID:27247103

Effects of worksite health interventions involving reduced work hours and physical exercise on sickness absence costs.

Science.gov (United States)

von Thiele Schwarz, Ulrica; Hasson, Henna

2012-05-01

To investigate the effects of physical exercise during work hours (PE) and reduced work hours (RWH) on direct and indirect costs associated with sickness absence (SA). Sickness absence and related costs at six workplaces, matched and randomized to three conditions (PE, RWH, and referents), were retrieved from company records and/or estimated using salary conversion methods or value-added equations on the basis of interview data. Although SA days decreased in all conditions (PE, 11.4%; RWH, 4.9%; referents, 15.9%), costs were reduced in the PE (22.2%) and RWH (4.9%) conditions but not among referents (10.2% increase). Worksite health interventions may generate savings in SA costs. Costs may not be linear to changes in SA days. Combing the friction method with indirect cost estimates on the basis of value-added productivity may help illuminate both direct and indirect SA costs.

20 CFR 801.304 - Business hours.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Business hours. 801.304 Section 801.304 Employees' Benefits BENEFITS REVIEW BOARD, DEPARTMENT OF LABOR ESTABLISHMENT AND OPERATION OF THE BOARD Action by the Board § 801.304 Business hours. The office of the Clerk of the Board at Washington, DC...

Content changes of selected mineral nutrients in mare’s colostrums in the first 72 hours after foaling

Directory of Open Access Journals (Sweden)

Branislav Gálik

2012-01-01

Full Text Available The aim of this study was to monitor levels of minerals in mare’s colostrum in the first 3 days after foaling. Colostrum samples from four warm-blood mares (in three repetitions were analysed 2, 12, 24, 36, 48 and 72 hours postpartum. The samples were obtained by hand milking. Calcium (Ca, phosphorus (P, magnesium (Mg, sodium (Na, potassium (K, zinc (Zn, copper (Cu, iron (Fe and manganese (Mn contents were analysed in each sample. Non-significant decrease of postpartum Ca and Na contents was found in the analysed samples. Significant differences (P < 0.05 in P content were detected between 2 and 36 hours postpartum. Content of Mg showed statistically significant differences (P < 0.05 during the period after foaling (2, 24, 36, 48 and 72 hours post foaling. Mg concentration reached its maximum (21.8 g.kg−1 of dry matter 2 hours postpartum and it dropped to its lowest level (5.27 g.kg−1 of dry matter 48 hours after foaling. Similarly, the highest K content (significant in relation to values obtained 36, 48 and 72 hours postpartum was detected 2 hours after foaling while the lowest K level (37.96 g.kg−1 of dry matter was found 48 hours postpartum. As regards the microelements, Cu showed insignificant differences in its postpartum levels (P > 0.05. Besides growth of Fe levels, decrease of Zn and Mn (P > 0.05 was also observed.

Impact of Working Hours on Work-Life Balance

OpenAIRE

Sarah Holly; Alwine Mohnen

2012-01-01

To examine the influence of working hours on employees' satisfaction, this article uses a large, representative set of panel data from German households (GSOEP). The results show that high working hours and overtime in general do not lead to decreased satisfaction. Rather, increasing working hours and overtime have positive effects on life and job satisfaction, whereas the desire to reduce working hours has a negative impact on satisfaction. In 2009, nearly 60% of employees wanted to reduce t...

Do difficulties in accessing in-hours primary care predict higher use of out-of-hours GP services? Evidence from an English National Patient Survey.

Science.gov (United States)

Zhou, Yin; Abel, Gary; Warren, Fiona; Roland, Martin; Campbell, John; Lyratzopoulos, Georgios

2015-05-01

It is believed that some patients are more likely to use out-of-hours primary care services because of difficulties in accessing in-hours care, but substantial evidence about any such association is missing. We analysed data from 567,049 respondents to the 2011/2012 English General Practice Patient Survey who reported at least one in-hours primary care consultation in the preceding 6 months. Of those respondents, 7% also reported using out-of-hours primary care. We used logistic regression to explore associations between use of out-of-hours primary care and five measures of in-hours access (ease of getting through on the telephone, ability to see a preferred general practitioner, ability to get an urgent or routine appointment and convenience of opening hours). We illustrated the potential for reduction in use of out-of-hours primary care in a model where access to in-hours care was made optimal. Worse in-hours access was associated with greater use of out-of-hours primary care for each access factor. In multivariable analysis adjusting for access and patient characteristic variables, worse access was independently associated with increased out-of-hours use for all measures except ease of telephone access. Assuming these associations were causal, we estimated that an 11% relative reduction in use of out-of-hours primary care services in England could be achievable if access to in-hours care were optimal. This secondary quantitative analysis provides evidence for an association between difficulty in accessing in-hours care and use of out-of-hours primary care services. The findings can motivate the development of interventions to improve in-hour access. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

On the use of hourly pricing in techno-economic analyses for solar photovoltaic systems

International Nuclear Information System (INIS)

Sommerfeldt, Nelson; Madani, Hatef

2015-01-01

Highlights: • The typical price year (TPY) method is described. • The impact of pricing simplification models on revenues and NPV are tested. • The TPY is shown to be a good long-term price curve for techno-economic studies. • A static mean annual price can replace hourly in the Swedish market with minimal error. - Abstract: The use of hourly prices in distributed photovoltaic (PV) techno-economic analysis is rare, but may become necessary as time-of-day retail pricing becomes more common. A methodology is presented for selecting an hourly price curve suitable for long-term analysis, called the typical price year (TPY), which is based on the methodology for TMY weather data. Using a techno-economic analysis with annual revenues and net present value as indicators, a TPY curve for the Swedish market is validated and then compared to 18 price simplification methods to determine the error introduced by the use of non-hourly prices. Results show that the TPY method produces a curve which accurately represents long term pricing trends, but using a static annual mean introduces minor revenue errors of 1.3%. This suggests the TPY may not be necessary in the Swedish market, but further analysis of the method is suggested for other markets

Analysis of 24-hour versus 48-hour traffic counts for HPMS sampling.

Science.gov (United States)

2014-04-01

The Illinois Department of Transportation (IDOT) has requested a waiver from the Federal Highway Administration (FHWA) to : allow IDOT to implement a 24-hour traffic-count program on the non-state HPMS routes, as opposed to the current Highway : Perf...

A new approach for evaluating flexible working hours.

Science.gov (United States)

Giebel, Ole; Janssen, Daniela; Schomann, Carsten; Nachreiner, Friedhelm

2004-01-01

Recent studies on flexible working hours show at least some of these working time arrangements seem to be associated with impairing effects of health and well-being. According to available evidence, variability of working hours seems to play an important role. The question, however, is how this variability can be assessed and used to explain or predict impairments. Based on earlier methods used to assess shift-work effects, a time series analysis approach was applied to the matter of flexible working hours. Data on the working hours of 4 week's length of 137 respondents derived from a survey on flexible work hours involving 15 companies of different production and service sectors in Germany were converted to time series and analyzed by spectral analysis. A cluster analysis of the resulting power spectra yielded 5 clusters of flexible work hours. Analyzing these clusters for differences in reported impairments showed that workers who showed suppression of circadian and weekly rhythms experienced severest impairments, especially in circadian controlled functions like sleep and digestion. The results thus indicate that analyzing the periodicity of flexible working hours seems to be a promising approach for predicting impairments which should be investigated further in the future.

Gender-specific dynamics in hours worked : Exploring the potential for increasing hours worked in an ageing society

NARCIS (Netherlands)

Noback, Inge; Broersma, Lourens; van Dijk, Jouke; Karlsson, Charlie; Andersson, Martin; Norman, Therese

2015-01-01

The Dutch labour market differs from that of other countries due to a unique combination of high employment rates and a low average number of hours worked. Dutch employment rates are among the highest in the world, at 77 per cent in 2011. At the same time, the average number of hours worked annually

Interns shall not sleep: the duty hours boomerang

Directory of Open Access Journals (Sweden)

Quan SF

2017-04-01

Full Text Available No abstract available. Article truncated after 150 words. On March 10, 2017, the Accreditation Council for Graduate Medical Education (ACGME announced revisions to its common program requirements related to duty hours (1. Effective on July 1, 2017, the most important change will be an increase in the maximum consecutive hours that an intern may work. Interns will now be able to continuously perform patient care work up to a maximum of 24 hours with an additional 4 hours for managing care transitions. This reverses the controversial reduction to 16 hours that occurred in 2011 (2. The regulation of house staff duty hours formally began in the late 1980s. It was precipitated largely because of the publicity resulting from the 1984 death of Libby Zion in a New York teaching hospital that was attributed partly to poor decisions made by fatigued and overworked house staff (3. Consequently, the state of New York in 1989 passed laws restricting the …

Economic Analysis of Long Working Hours (Japanese)

OpenAIRE

OHTAKE Fumio; OKUDAIRA Hiroko

2008-01-01

In this paper we set out the economic grounds for restrictions on long working hours and conduct an empirical analysis using surveys from the perspective of behavioral economics. The results of the analysis indicate that, on a year-on-year basis, if state of health improves, the probability of working more than 60 hours per week increases significantly, but that even when state of health deteriorates there is no decrease in the probability of working long hours. Moreover, among male managemen...

Health problems due to long working hours in Japan: working hours, workers' compensation (Karoshi), and preventive measures.

Science.gov (United States)

Iwasaki, Kenji; Takahashi, Masaya; Nakata, Akinori

2006-10-01

Late in the 1970s, serious social concern over health problems due to long working hours has arisen in Japan. This report briefly summarizes the Japanese circumstances about long working hours and what the Government has achieved so far. The national statistics show that more than 6 million people worked for 60 h or more per week during years 2000 and 2004. Approximately three hundred cases of brain and heart diseases were recognized as labour accidents resulting from overwork (Karoshi) by the Ministry of Health, Labour and Welfare (MHLW) between 2002 and 2005. Consequently, the MHLW has been working to establish a more appropriate compensation system for Karoshi, as well as preventive measures for overwork related health problems. In 2001, the MHLW set the standards for clearly recognizing Karoshi in association with the amount of overtime working hours. These standards were based on the results of a literature review and medical examinations indicating a relationship between overwork and brain and heart diseases. In 2002, the MHLW launched the program for the prevention of health impairment due to overwork, and in 2005 the health guidance through an interview by a doctor for overworked workers has been enacted as law. Long working hours are controversial issues because of conflicts between health, safety, work-life balance, and productivity. It is obvious that we need to continue research regarding the impact on worker health and the management of long working hours.

Multiple-dose pharmacokinetic study of proguanil and cycloguanil following 12-hourly administration of 100 mg proguanil hydrochloride.

Science.gov (United States)

Jamaludin, A; Mohamad, M; Navaratnam, V; Yeoh, P Y; Wernsdorfer, W H

1990-09-01

A pharmacokinetic study with 12-hourly doses of 100 mg proguanil hydrochloride over 15 days has been conducted in six adult male Malaysian volunteers. Steady state for proguanil was established after the fourth dose on Day 2, for the active metabolite cycloguanil as from Day 3 inclusive. The steady state mean peak concentration of proguanil was 1201.6 +/- 132.4 nmol/l, the mean trough concentration 650.0 +/- 58.1 nmol/l. The corresponding values for cycloguanil were 317.0 +/- 44.4 nmol/l (mean peak) and 230.8 +/- 35.1 nmol/l (mean trough). The profiles and peak/trough ratios of proguanil and cycloguanil with 12-hourly dosing offer better prospects for protection against malaria than those obtained with 24-hourly doses of 200 mg proguanil hydrochloride, the current routine in malaria chemoprophylaxis.

Economic Value of Agroecosystem Services within Wheat Fields in Khorasan Razavi Province

Directory of Open Access Journals (Sweden)

a Koocheki

2017-08-01

questionnaires collected from 40 fields varying in area, management and inputs level. Using these data economic value of feed and food, carbon sequestration, oxygen production, biodiversity, water retention and tourism together with greenhouse gas emission and nitrogen and phosphorous leakage as environmental externalities was quantified. Calculations were based on standard methods described by Millennium Ecosystem Assessment. Economic values were estimated as international dollar as proposed by De Groot et al. (2012 and reported as equivalent national price. Results and discussion The mean value of the total agroecosystem services of wheat fields excluding externalities, were estimated as 66.85×106 Rls.ha-1.y-1. The value of non-marketable services was 3.46 times more than food and feed and on average atmospheric services (oxygen production and carbon sequestration contributed up to 62% of total value while biodiversity and provisional services included 9.3 and 21% of total, respectively and the other services below 5%. Net value of services was increased with increasing field size. However, doubling field size resulted in 50% increase in net value because larger fields were more intensified leading to higher negative impacts. Economic value of services was significantly dependent on wheat total dry matter and yield. Nonlinear relation was found between wheat yield and total value of services where a break point was found at yields above 4 t.ha-1. However, negative externalities were increased linearly with increasing both total dry matter and grain yield. Conclusion Results of this study indicated that despite to intensive management wheat production systems of Khorasan province are able to provide several regulating and supporting services and their economic value is 3-4 folds higher than provisional services harvested as grain and feed. However, negative externalities will be increased in more intensified fields with higher yield. Feeding a growing human population is

Long working hours and physical activity.

Science.gov (United States)

Angrave, David; Charlwood, Andy; Wooden, Mark

2015-08-01

It is widely believed that persons employed in jobs demanding long working hours are at greater risk of physical inactivity than other workers, primarily because they have less leisure time available to undertake physical activity. The aim of this study was to test this hypothesis using prospective data obtained from a nationally representative sample of employed persons. Longitudinal data from the Household, Income and Labour Dynamics in Australia Survey (93,367 observations from 17,893 individuals) were used to estimate conditional fixed effects logistic regression models of the likelihood of moderate or vigorous physical exercise for at least 30 min, at least four times a week. No significant associations between long working hours and the incidence of healthy levels of physical activity were uncovered once other exogenous influences on activity levels were controlled for. The odds of men or women who usually work 60 or more hours per week exercising at healthy levels were 6% and 11% less, respectively, than those of comparable persons working a more standard 35-40 h/week; however, neither estimate was significantly different from 0 at 95% CI. The findings suggest that there is no trade-off between long working hours and physical activity in Australia. It is argued that these findings are broadly consistent with previous research studies from Anglo-Saxon countries (where long working hours are pervasive) that employed large nationally representative samples. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Flexible working hours and well-being in Finland.

Science.gov (United States)

Kandolin, I; Härmä, M; Toivanen, M

2001-12-01

Flexibility of working hours became more prevalent in the 1990s in Finland. According to a representative survey on Finnish wage and salary earners (n = 1790) at the beginning of 2000, a great majority of male (76%) and female (65%) employees regularly worked overtime and/or had irregular working hours every month. These employees were flexible in meeting the needs of their companies/employers. Individual flexibility of working hours was far less common, only one third of male and female employees were able to regulate their working hours. A better balance between company-controlled and individual flexibility would, however, improve the well-being of employees. Employees working overtime without being allowed to regulate their working hours felt more symptoms of distress and had more conflicts in combining workplace and family roles than those who could individually determine their working hours flexibly. An investment in individually determined flexibility, for example by means of participatory planning, would improve the well-being of employees, and thus also improve the productivity of the organization.

Excel VBA 24-hour trainer

CERN Document Server

Urtis, Tom

2015-01-01

Master VBA automation quickly and easily to get more out of Excel Excel VBA 24-Hour Trainer, 2nd Edition is the quick-start guide to getting more out of Excel, using Visual Basic for Applications. This unique book/video package has been updated with fifteen new advanced video lessons, providing a total of eleven hours of video training and 45 total lessons to teach you the basics and beyond. This self-paced tutorial explains Excel VBA from the ground up, demonstrating with each advancing lesson how you can increase your productivity. Clear, concise, step-by-step instructions are combined wit

A Century of Human Capital and Hours

OpenAIRE

Diego Restuccia; Guillaume Vandenbroucke

2012-01-01

An average person born in the United States in the second half of the nineteenth century completed 7 years of schooling and spent 58 hours a week working in the market. By contrast, an average person born at the end of the twentieth century completed 14 years of schooling and spent 40 hours a week working. In the span of 100 years, completed years of schooling doubled and working hours decreased by 30 percent. What explains these trends? We consider a model of human capital and labor supply t...

Regulating danger on the highways: hours of service regulations.

Science.gov (United States)

Mansfield, Daniel; Kryger, Meir

2015-12-01

Current hours of service regulations governing commercial truck drivers in place in the United States, Canada, Australia, and the European Union are summarized and compared to facilitate the assessment of the effectiveness of such provisions in preventing fatigue and drowsiness among truck drivers. Current hours of service provisions governing commercial truck drivers were derived from governmental sources. The commercial truck driver hours of service provisions in the United States, Canada, and the European Union permit drivers to work 14 hours and those of Australia permit drivers to work 12 hours a day on a regular basis. The regulations do not state what a driver may do with time off. They are consistent with a driver being able to drive after 24 hours without sleep. They do not take into account circadian rhythm by linking driving or rest to time of day. Current hours of service regulations governing commercial truck drivers leave gaps--permitting drivers to work long hours on a regular basis, permitting driving after no sleep for 24 hours, and failing to take into account the importance of circadian rhythm, endangering the public safety and the truck drivers themselves. Copyright © 2015 National Sleep Foundation. Published by Elsevier Inc. All rights reserved.

Long working hours and alcohol use

DEFF Research Database (Denmark)

Virtanen, Marianna; Jokela, Markus; Nyberg, Solja T

2015-01-01

.2%). There was no difference in these associations between men and women or by age or socioeconomic groups, geographical regions, sample type (population based v occupational cohort), prevalence of risky alcohol use in the cohort, or sample attrition rate. CONCLUSIONS: Individuals whose working hours exceed standard......OBJECTIVE: To quantify the association between long working hours and alcohol use. DESIGN: Systematic review and meta-analysis of published studies and unpublished individual participant data. DATA SOURCES: A systematic search of PubMed and Embase databases in April 2014 for published studies......, supplemented with manual searches. Unpublished individual participant data were obtained from 27 additional studies. REVIEW METHODS: The search strategy was designed to retrieve cross sectional and prospective studies of the association between long working hours and alcohol use. Summary estimates were...

For improvements of issues behind food safety regulations implemented following the Fukushima nuclear accident

International Nuclear Information System (INIS)

Hamada, Nobuyuki; Ogino, Haruyuki

2011-01-01

The great quake and a subsequent tsunami seriously damaged the Fukushima nuclear power plants on 11 March 2011, followed by radionuclide releases outside the crippled reactors. Regulatory limits stipulated as 'provisional regulation values' were set to minimize internal exposure via ingestion of contaminated food and drink. Tap water, raw milk, vegetables, seafood and tea exceeded the limit, and distribution and/or consumption of these stuffs were temporality restricted. It took 7 and 11 days to set the provisional regulation values and to order the first restriction after the declaration of nuclear emergency situations, respectively. All restrictions began within 25 days after the first excess in each item, but the commencement of restrictions was concomitant with the social dislocations. All restrictions for tap water were withdrawn within 51 days, but restrictions for food have yet to be lifted. Among all items, maximum levels were detected in leafy vegetables (54,100 Bq/kg of 131 I, 82,000 Bq/kg of 134 Cs and 137 Cs). Most provisional regulation values were adopted from the preexisting 'index values'. Index values were logically designed and practically convenient. However, food and radionuclides were not comprehensively covered, and the same value was given to emergency and existing exposure situations. Also, different provisional regulation values were set for infants and others. In this respect, we here propose the concept of the 'graded triphasic reference level system' to optimize food safety regulations in early, intermediate and late phases following the accident, where each example phase-specific reference level value is provided. This paper focuses on the logic and issues behind such food safety regulations. The food monitoring data of 24,685 samples and the enforced restrictions shall also be outlined predicated on the information available as of 12 June 2011. (author)

Migration plans and hours of work in Malaysia.

Science.gov (United States)

Gillin, E D; Sumner, D A

1985-01-01

"This article describes characteristics of prospective migrants in the Malaysian Family Life Survey and investigates how planning to move affects hours of work. [The authors] use ideas about intertemporal substitution...to discuss the response to temporary and permanent wage expectations on the part of potential migrants. [An] econometric section presents reduced-form estimates for wage rates and planned migration equations and two-stage least squares estimates for hours of work. Men currently planning a move were found to work fewer hours. Those originally planning only a temporary stay at their current location work more hours." excerpt

Are long physician working hours harmful to patient safety?

Science.gov (United States)

Ehara, Akira

2008-04-01

Pediatricians of Japanese hospitals including not only residents but also attending physicians work long hours, and 8% work for >79 h per week. Most of them work consecutively for >or=32 h when they are on call. The aim of the present study was to evaluate the effect of long work hours on patient safety. The electronic databases MEDLINE and EMBASE to searched identify the English- and Japanese-language literature for studies on work hours, medical errors, patient safety, and malpractice for years 1966-2005. Studies that analyzed the relationship between physician work hours and outcomes directly related to patient safety were selected. Seven studies met the criteria. Four studies suggest that reduction of work hours has a favorable effect on patient safety indicators. In the other three studies no significant changes of the indicators were observed, but no report found that shorter work hours were harmful to patient safety. Decrease of physician work hours is not harmful but favorable to patient safety.

Work-hour restrictions as an ethical dilemma for residents.

Science.gov (United States)

Carpenter, Robert O; Austin, Mary T; Tarpley, John L; Griffin, Marie R; Lomis, Kimberly D

2006-04-01

We propose that the standardized work-hour limitations have created an ethical dilemma for residents. A survey tool was designed to assess factors that influence the number of hours residents work and report. The program directors of pediatrics, internal medicine, and general surgery at our institution supported their residents' participation. A voluntary, anonymous survey of these residents was performed. One hundred seventy of 265 eligible residents were surveyed. Eighty-one percent of residents surveyed responded. Eighty percent of respondents reported exceeding work-hour restrictions at least once within the past 6 months. The factor of greatest influence measured was concern for patient care (80%). Forty-nine percent of respondents admitted underreporting their work hours. The Accreditation Council for Graduate Medical Education work-hour restrictions have created an ethical dilemma for residents. Our data show that a significant number of residents feel compelled to exceed work-hour regulations and report those hours falsely.

Long working hours and alcohol use

DEFF Research Database (Denmark)

Virtanen, Marianna; Jokela, Markus; Nyberg, Solja T

2015-01-01

OBJECTIVE: To quantify the association between long working hours and alcohol use. DESIGN: Systematic review and meta-analysis of published studies and unpublished individual participant data. DATA SOURCES: A systematic search of PubMed and Embase databases in April 2014 for published studies......, supplemented with manual searches. Unpublished individual participant data were obtained from 27 additional studies. REVIEW METHODS: The search strategy was designed to retrieve cross sectional and prospective studies of the association between long working hours and alcohol use. Summary estimates were...... countries. The pooled maximum adjusted odds ratio for the association between long working hours and alcohol use was 1.11 (95% confidence interval 1.05 to 1.18) in the cross sectional analysis of published and unpublished data. Odds ratio of new onset risky alcohol use was 1.12 (1.04 to 1...

Duty hour reform in a shifting medical landscape.

Science.gov (United States)

Jena, Anupam B; Prasad, Vinay

2013-09-01

The circumstances that led to the death of Libby Zion in 1984 prompted national discussions about the impact of resident fatigue on patient outcomes. Nearly 30 years later, national duty hour reforms largely motivated by patient safety concerns have demonstrated a negligible impact of duty hour reductions on patient mortality. We suggest that the lack of an impact of duty hour reforms on patient mortality is due to a different medical landscape today than existed in 1984. Improvements in quality of care made possible by computerized order entry, automated medication checks, inpatient pharmacists, and increased resident supervision have, among other systemic changes, diminished the adverse impact that resident fatigue is able to have on patient outcomes. Given this new medical landscape, advocacy towards current and future duty hour reforms may be best justified by evidence of the impact of duty hour reform on resident wellbeing, education, and burnout.

Work hours and absenteeism among police officers.

Science.gov (United States)

Fekedulegn, Desta; Burchfiel, Cecil M; Hartley, Tara A; Baughman, Penelope; Charles, Luenda E; Andrew, Michael E; Violanti, John M

2013-01-01

In this study, the cross-sectional association of paid work hours with episodes of work absence was examined in a cohort of police officers. Study subjects were participants from the Buffalo Cardio-Metabolic Occupational Police Stress (BCOPS) study examined between 2004 and 2009. Among 395 study participants with complete data, day-by-day work history records during the one-year period prior to date of examination were used to determine episodes of one-day and three day work absence. The Negative binomial regression analysis was used to examine rate ratios (RR) of work absence. Analyses were also stratified by gender. A one-hour increase in total work hours was associated with 5% reduction in rate of one-day work absence (RR = 0.95, 95% CI: 0.92 - 0.98) and with 8% reduction in rate of three-day work absence (RR = 0.92, 95% CI: 0.89 - 0.95). The association of total work hours with episodes of one-day work absence was significant only in men while the association with episodes of three-day work absence was evident in men and women. In conclusion, in this cohort of police officers, work hours were negatively associated with both durations of work absence (one-day, > or = 3 consecutive days).

Evaluation of a twelve-hour/day shift schedule

International Nuclear Information System (INIS)

Lewis, P.M.; Swaim, D.J.

1986-01-01

In April 1985, the operating crews at the Fast Flux Test Facility near Richland, Washington, changed their rotating shift schedule from an 8-hour to a 12-hour a day work schedule. The primary purpose of the change was to reduce the attrition of operators by increasing their job satisfaction. Eighty-four percent of the operators favored the change. A program was established to evaluate the effects on plant performance, operator alertness, attrition, sleep, health, job satisfaction, and off-the-job satisfaction. Preliminary results from that evaluation program indicate that the 12-hour shift schedule is a reasonable alternative to an 8-hour schedule at this facility

168 Hours Salt Fog Test

International Nuclear Information System (INIS)

Nur Ubaidah Saidin; Muhamad Daud; Siti Radiah Mohd Kamarudin

2011-01-01

This report explained the test conducted in salt fog chamber to evaluate the effectiveness of mild steel, coated with rust converter, for 168 hours in artificial seawater exposure. The samples were compared with mild steel coated with commercial primer. The tests were conducted followed ASTM B117. Individual pictures were taken of each sample before the tests began, at 24, 48, 72, 96, 120, 144 and 168 hours to see the progression of the corrosion. Results showed that the samples coated with rust converter provide a good significant protection against corrosion phenomenon than the samples coated with commercial primer that available in the market. (author)

The effect of ionizing radiation on the nutritional value of food

International Nuclear Information System (INIS)

Beyers, M.

1981-01-01

The first successful attempt to preserve food by means of irradiation was reported in 1943. In South Africa, research on the application of irradiation in agriculture commenced in 1961. In 1976 a Joint FAO/IAEA/WHO Expert Committee declared five irradiated foods as unconditionally safe for human consumption and provisionally recommended another three commodities. Mangoes, papayas, strawberries, potatoes, chickens, onions and garlic have been granted unlimited clearance for sale in South Africa with provisional clearance being given for dried bananas and avocadoes. In order to evaluate the nutritional aspects of food irradiation the Joint Expert Committee emphasised that it is important to: (1) examine the changes that occur in the nutrient content of foods following irradiation; (2) determine whether the bio-availability of nutrients is in any way altered; and (3) establish whether changes, if they do occur, would have possible adverse nutritional consequences. Numerous investigations have proved that the nutrient content of foods is not significantly affected by irradiation nor the bio-availability of the nutrients impaired. To date, no adverse nutritional consequences as a result of changes caused by irradiation could be detected. A table listing irradiated food items that have been cleared is also given

Full-time Workers Want to Work Fewer Hours, Part-time Workers Want to Work Longer Hours

OpenAIRE

Holst, Elke

2009-01-01

Since the reunification of Germany, average working times for men and women have followed different trends. There are various reasons for the difference. More and more women are gainfully employed; they engage in part-time and marginal employment, both of which are on the rise. The importance of full-time employment has declined. This accounts for most of the reduction in their average workweek, which decreased by 2.3 hours to 31.9 hours between 1993 and 2007. The full-time employment of men ...

Time-Varying Value of Energy Efficiency in Michigan

Energy Technology Data Exchange (ETDEWEB)

Mims, Natalie; Eckman, Tom; Schwartz, Lisa C.

2018-04-02

Quantifying the time-varying value of energy efficiency is necessary to properly account for all of its benefits and costs and to identify and implement efficiency resources that contribute to a low-cost, reliable electric system. Historically, most quantification of the benefits of efficiency has focused largely on the economic value of annual energy reduction. Due to the lack of statistically representative metered end-use load shape data in Michigan (i.e., the hourly or seasonal timing of electricity savings), the ability to confidently characterize the time-varying value of energy efficiency savings in the state, especially for weather-sensitive measures such as central air conditioning, is limited. Still, electric utilities in Michigan can take advantage of opportunities to incorporate the time-varying value of efficiency into their planning. For example, end-use load research and hourly valuation of efficiency savings can be used for a variety of electricity planning functions, including load forecasting, demand-side management and evaluation, capacity planning, long-term resource planning, renewable energy integration, assessing potential grid modernization investments, establishing rates and pricing, and customer service (KEMA 2012). In addition, accurately calculating the time-varying value of efficiency may help energy efficiency program administrators prioritize existing offerings, set incentive or rebate levels that reflect the full value of efficiency, and design new programs.

Long work hours and obesity in Korean adult workers.

Science.gov (United States)

Jang, Tae-Won; Kim, Hyoung-Ryoul; Lee, Hye-Eun; Myong, Jun-Pyo; Koo, Jung-Wan

2014-01-01

The present study was designed to identify the association between work hours and obesity in Korean adult manual and nonmanual workers, and to determine whether there is a gender difference in this association. The study was conducted using Korean National Health and Nutrition Examination Survey data collected between 2007 and 2010. Individuals aged below 25 or over 64 years, pregnant women, part-time workers, soldiers, housewives and students were excluded. The total number of individuals included in the analysis was 8,889 (5,241 male and 3,648 female subjects). The outcome variable was obesity, defined as body mass index ≥25 kg/m(2). Variables considered in the model were age, education, income, marital status, alcohol drinking, smoking, daily energy intake, physical activity, sleep hours per day, the type of job, work hours, and work schedule. Work hours were categorized as 60 hours per week. In the multiple SURVEYLOGISTIC regression analyses, the adjusted odds ratio of obesity for long work hours (>60 hours per week) in male manual workers was 1.647 (95% confidence interval 1.262-2.151). Long work hours did not significantly increase the odds ratio for obesity in male nonmanual workers and female manual and nonmanual workers. More than 60 work hours per week increased the risk of obesity in Korean male manual workers. This result might be helpful in preventing obesity in Korean adult workers, especially male manual workers.

Factors influencing accruement of contact hours for nurses.

Science.gov (United States)

Kubsch, Sylvia; Henniges, Amy; Lorenzoni, Nancy; Eckardt, Sally; Oleniczak, Sandra

2003-01-01

A decline in attendance at continuing education (CE) in nursing activities was observed in a Midwest state where CE attendance is not required. The purpose of this research study was to identify the effect of attitude, extrinsic and intrinsic reinforcement, and deterrents on contact hour accrual. A convenience sample of 282 registered nurses was surveyed using a researcher-constructed instrument determined to be valid and reliable. Registered nurses earning 0 to 15 contact hours annually reported accruing fewer contact hours in 1999 than in an average year. Registered nurses who earned 16 to 45+ contact hours annually reported earning more contact hours in 1999 than in an average year. Intrinsic reinforcement was found to be a significant motivator (r [257] = .242; p Operant Conditioning Theory has use in explaining registered nurse attendance at CE activities. CE planners should consider placing more emphasis on intrinsic rather than extrinsic reinforcement to encourage staff to attend CE activities.

24-Hour Academic Libraries: Adjusting to Change

Science.gov (United States)

Bowman, Adam C.

2013-01-01

The purpose of this study was to explore the adaptive measures that academic libraries perform when implementing and operating a 24-hour schedule. Five in-depth interviews were conducted with current managerial-level librarians at 24-hour academic libraries. The exploratory interviews revealed similar measures for security, budgeting, employee…

Severe hypokalemia mimicking Guillain-Barré Syndrome in 42 ...

African Journals Online (AJOL)

This followed a one day history of frequent diarrhea, vomiting and low grade fever. A provisional diagnosis of GBS was given by the treating physician and the patient was intubated for ventilatory support. A few hours later the serum potassium and magnesium were reported to be very low, so the patient was given parenteral ...

Modeling temporal and spatial variability of traffic-related air pollution: Hourly land use regression models for black carbon

Science.gov (United States)

Dons, Evi; Van Poppel, Martine; Kochan, Bruno; Wets, Geert; Int Panis, Luc

2013-08-01

Land use regression (LUR) modeling is a statistical technique used to determine exposure to air pollutants in epidemiological studies. Time-activity diaries can be combined with LUR models, enabling detailed exposure estimation and limiting exposure misclassification, both in shorter and longer time lags. In this study, the traffic related air pollutant black carbon was measured with μ-aethalometers on a 5-min time base at 63 locations in Flanders, Belgium. The measurements show that hourly concentrations vary between different locations, but also over the day. Furthermore the diurnal pattern is different for street and background locations. This suggests that annual LUR models are not sufficient to capture all the variation. Hourly LUR models for black carbon are developed using different strategies: by means of dummy variables, with dynamic dependent variables and/or with dynamic and static independent variables. The LUR model with 48 dummies (weekday hours and weekend hours) performs not as good as the annual model (explained variance of 0.44 compared to 0.77 in the annual model). The dataset with hourly concentrations of black carbon can be used to recalibrate the annual model, resulting in many of the original explaining variables losing their statistical significance, and certain variables having the wrong direction of effect. Building new independent hourly models, with static or dynamic covariates, is proposed as the best solution to solve these issues. R2 values for hourly LUR models are mostly smaller than the R2 of the annual model, ranging from 0.07 to 0.8. Between 6 a.m. and 10 p.m. on weekdays the R2 approximates the annual model R2. Even though models of consecutive hours are developed independently, similar variables turn out to be significant. Using dynamic covariates instead of static covariates, i.e. hourly traffic intensities and hourly population densities, did not significantly improve the models' performance.

“Friday off”: Reducing Working Hours in Europe

Directory of Open Access Journals (Sweden)

Jack Rossiter

2013-04-01

Full Text Available This article explores the pros and cons for reducing working hours in Europe. To arrive to an informed judgment we review critically the theoretical and empirical literature, mostly from economics, concerning the relation between working hours on the one hand, and productivity, employment, quality of life, and the environment, on the other. We adopt a binary economics distinction between capital and labor productiveness, and are concerned with how working hours may be reduced without harming the earning capacity of workers. There are reasons to believe that reducing working hours may absorb some unemployment, especially in the short-run, even if less than what is advocated by proponents of the proposal. Further, there may well be strong benefits for the quality of peoples’ lives. Environmental benefits are likely but depend crucially on complementary policies or social conditions that will ensure that the time liberated will not be directed to resource-intensive or environmentally harmful consumption. It is questionable whether reduced working hours are sustainable in the long-term given resource limits and climate change. We conclude that while the results of reducing working hours are uncertain, this may be a risk worth taking, especially as an interim measure that may relieve unemployment while other necessary structural changes are instituted.

The Association between Long Working Hours and Self-Rated Health

Science.gov (United States)

2014-01-01

Objectives This study was conducted to determine the number of hours worked per week by full-time wage workers by using the data of the Korean Labor and Income Panel Study (KLIPS), which represents the domestic urban area household, and to determine the association between weekly working hours and the level of self-rated health. Methods We used data from the 11th KLIPS conducted in 2008. The subjects of this study were 3,699 full-time wage workers between the ages of 25 and 64 years. The association between weekly working hours and self-rated health was analyzed considering socio-demographic characteristics, work environment, and health-related behaviors. Results Among the workers, 29.7% worked less than 40 hours per week; 39.7%, more than 40 to 52 hours; 19.7%, more than 52 to 60 hours; and 10.9%, more than 60 hours per week. After controlling for socio-demographic variables, work environment-related variables, and health-related behavior variables, the odds ratio (OR) for poor self-rated health for the group working more than 40 hours and up to 52 hours was calculated to be 1.06 (95% confidence interval (CI), 0.89-1.27) when the group working less than 40 hours per week was considered the reference. The OR for the group working more than 60 hours was 1.42 (95% CI, 1.10-1.83) and that for the group working more than 52 hours and up to 60 hours was 1.07 (95% CI, 0.86-1.33). After stratification by gender and tenure, the OR of the female workers group and that of the group with a tenure of more than 1 year were found to be significantly higher than those of the other groups. Conclusions This study showed that workers working more than 60 hours per week have a significantly higher risk of poor self-rated health than workers working less than 40 hours per week. This effect was more obvious for the female workers group and the group with a tenure of more than 1 year. In the future, longitudinal studies may be needed to determine the association between long working

The Association between Long Working Hours and Self-Rated Health.

Science.gov (United States)

Song, Jun-Taek; Lee, Goeun; Kwon, Jongho; Park, Jung-Woo; Choi, Hyunrim; Lim, Sinye

2014-01-20

This study was conducted to determine the number of hours worked per week by full-time wage workers by using the data of the Korean Labor and Income Panel Study (KLIPS), which represents the domestic urban area household, and to determine the association between weekly working hours and the level of self-rated health. We used data from the 11th KLIPS conducted in 2008. The subjects of this study were 3,699 full-time wage workers between the ages of 25 and 64 years. The association between weekly working hours and self-rated health was analyzed considering socio-demographic characteristics, work environment, and health-related behaviors. Among the workers, 29.7% worked less than 40 hours per week; 39.7%, more than 40 to 52 hours; 19.7%, more than 52 to 60 hours; and 10.9%, more than 60 hours per week. After controlling for socio-demographic variables, work environment-related variables, and health-related behavior variables, the odds ratio (OR) for poor self-rated health for the group working more than 40 hours and up to 52 hours was calculated to be 1.06 (95% confidence interval (CI), 0.89-1.27) when the group working less than 40 hours per week was considered the reference. The OR for the group working more than 60 hours was 1.42 (95% CI, 1.10-1.83) and that for the group working more than 52 hours and up to 60 hours was 1.07 (95% CI, 0.86-1.33). After stratification by gender and tenure, the OR of the female workers group and that of the group with a tenure of more than 1 year were found to be significantly higher than those of the other groups. This study showed that workers working more than 60 hours per week have a significantly higher risk of poor self-rated health than workers working less than 40 hours per week. This effect was more obvious for the female workers group and the group with a tenure of more than 1 year. In the future, longitudinal studies may be needed to determine the association between long working hours and various health effects in Korean

“Friday off”: Reducing Working Hours in Europe

OpenAIRE

Kallis, Giorgos; Kalush, Michael; O.'Flynn, Hugh; Rossiter, Jack; Ashford, Nicholas A.

2013-01-01

This article explores the pros and cons for reducing working hours in Europe. To arrive to an informed judgment we review critically the theoretical and empirical literature, mostly from economics, concerning the relation between working hours on the one hand, and productivity, employment, quality of life, and the environment, on the other. We adopt a binary economics distinction between capital and labor productiveness, and are concerned with how working hours may be reduced without harming ...

Use of an Intra-Arterial Catheter as a Provisional Conduit for Regulated Outflow Management in the Setting of Artery-Only Digital Replantation.

Science.gov (United States)

DeFazio, Michael V; Han, Kevin D; Paryavi, Ebrahim

2017-12-01

Successful replantation of distal digital segments necessitates the establishment of sufficient outflow to minimize congestion and progressive tissue necrosis. In cases where only arterial anastomosis is feasible, an artificial outlet must be provided to maintain physiological requirements until microvenous circulation regenerates. This can be accomplished using any number of "exsanguination techniques" designed to facilitate egress through ongoing passive blood loss. Although reportedly effective, these measures are imprecise and carry a substantial risk of infection, scarring, and/or uncontrolled hemorrhage. Herein, we describe a preemptive alternative for provisional venous drainage, whereby direct catheterization of a distal arterial branch is used to enhance the precision of outflow management following artery-only digital replantation. The establishment of intravascular access, using the technique described, permits remote manipulation of the microcirculatory environment through timed administration of heparinized saline and regulated removal of controlled volumes of blood.

Nursing work hours: individual needs versus working conditions.

Science.gov (United States)

Silva, Amanda Aparecida; Rotenberg, Lúcia; Fischer, Frida Marina

2011-12-01

To assess factors associated with professional and total hours of work (work + home) among nursing staff. Cross-sectional study conducted in a university hospital in the city of São Paulo, southeastern Brazil, between 2004 and 2005. A total of 696 workers (nurses, nurse technicians and aids), mostly women (87.8%) working day and/or night shifts, participated in the study. A self-administered questionnaire was used to collected information on demographic characteristics, and working and life conditions. Translated and adapted into Portuguese versions of the Job Stress Scale, Effort-reward imbalance, Short-Form-Health-related quality of life and the Work Ability Index were also administered. Logistic regression models were used for data analysis. Sole breadwinner, working night shifts and effort-reward imbalance were the variables associated with both professional (OR = 3.38, OR = 10.43, OR = 2.07, respectively) and total hours of work (OR = 1.57, OR = 3.37, OR = 2.75, respectively). There was no significant association between the variables related to hours of work and low Work Ability Index. Inadequate rest at home was statistically associated with professional (OR = 2.47) and total hours of work (OR = 1.48). Inadequate leisure time was significantly associated with professional hours of work (OR = 1.58) and barely associated with total hours of work (OR = 1.43). The sole breadwinner, working night shifts and effort-reward imbalance are variables that need to be further investigated in studies on work hours among nursing staff. These studies should explore workers' income and the relationship between effort and reward, taking into consideration gender issues.

Hourly temporal distribution of wind

Science.gov (United States)

Deligiannis, Ilias; Dimitriadis, Panayiotis; Koutsoyiannis, Demetris

2016-04-01

The wind process is essential for hydrometeorology and additionally, is one of the basic renewable energy resources. Most stochastic forecast models are limited up to daily scales disregarding the hourly scale which is significant for renewable energy management. Here, we analyze hourly wind timeseries giving emphasis on the temporal distribution of wind within the day. We finally present a periodic model based on statistical as well as hydrometeorological reasoning that shows good agreement with data. Acknowledgement: This research is conducted within the frame of the undergraduate course "Stochastic Methods in Water Resources" of the National Technical University of Athens (NTUA). The School of Civil Engineering of NTUA provided moral support for the participation of the students in the Assembly.

39 CFR 959.3 - Office, business hours.

Science.gov (United States)

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Office, business hours. 959.3 Section 959.3 Postal Service UNITED STATES POSTAL SERVICE PROCEDURES RULES OF PRACTICE IN PROCEEDINGS RELATIVE TO THE PRIVATE EXPRESS STATUTES § 959.3 Office, business hours. The offices of the officials mentioned in these rules are...

39 CFR 952.4 - Office business hours.

Science.gov (United States)

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Office business hours. 952.4 Section 952.4 Postal Service UNITED STATES POSTAL SERVICE PROCEDURES RULES OF PRACTICE IN PROCEEDINGS RELATIVE TO FALSE REPRESENTATION AND LOTTERY ORDERS § 952.4 Office business hours. The offices of the officials mentioned in these...

39 CFR 954.4 - Office business hours.

Science.gov (United States)

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Office business hours. 954.4 Section 954.4 Postal Service UNITED STATES POSTAL SERVICE PROCEDURES RULES OF PRACTICE IN PROCEEDINGS RELATIVE TO THE DENIAL, SUSPENSION, OR REVOCATION OF PERIODICALS MAIL PRIVILEGES § 954.4 Office business hours. The offices of the...

MODELS OF HOURLY DRY BULB TEMPERATURE AND ...

African Journals Online (AJOL)

Hourly meteorological data of both dry bulb temperature and relative humidity for 18 locations in Nigeria for the period 1995 to 2009 were analysed to obtain the mean monthly average and monthly hourly average of each of the two meteorological variables for each month for each location. The difference between the ...

17 CFR 12.3 - Business address; hours.

Science.gov (United States)

2010-04-01

... REPARATIONS General Information and Preliminary Consideration of Pleadings § 12.3 Business address; hours. The... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Business address; hours. 12.3..., DC 20581. It is open each day, except Saturdays, Sundays, and legal public holidays, from 8:15 a.m...

Effect of a 12-hour/day shift on performance

International Nuclear Information System (INIS)

Lewis, P.M.; Swaim, D.J.

1988-06-01

The operating crews at the Fast Flux Facility near Richland, Washington, changed their rotating shift schedule from an 8- to 12- hour/day work schedule. The primary reason for the change was to reduce the attrition of operators by increasing their job satisfaction. Eighty-four percent of the operators favored the change. Plant performance and safety were not adversely affected. A statistical analysis of 53 operator-related, off-normal events in 28 months concluded that there was no significant difference in either the number or the severity of off-normal events on the 12-hour shift. A statistical analysis of 200,000 log entries concluded that the error rate in completing logs actually declined by 25 percent on the 12-hour shift. Alertness, which was measured using computerized tests of mathematics and logical reasoning, reach a nadir on the first night shift for the 8- and 12-hour schedules alike, which indicates that the primary cause of fatigue was sleep disruption, not cumulative hours of work. All supervisors and 52 percent of the operators believe their crews work more effectively on the 12-hour shift; only 12 percent of the operators believe that their crews work less effectively. The evaluation indicated that the 12-hour shift scheduled is a reasonable alternative to an 8-hour schedule at this facility. 2 refs

Perspectives on the working hours of Australian junior doctors.

Science.gov (United States)

Glasgow, Nicholas J; Bonning, Michael; Mitchell, Rob

2014-01-01

The working hours of junior doctors have been a focus of discussion in Australia since the mid-1990s. Several national organizations, including the Australian Medical Association (AMA), have been prominent in advancing this agenda and have collected data (most of which is self-reported) on the working hours of junior doctors over the last 15 years. Overall, the available data indicate that working hours have fallen in a step-wise fashion, and AMA data suggest that the proportion of doctors at high risk of fatigue may be declining. It is likely that these changes reflect significant growth in the number of medical graduates, more detailed specifications regarding working hours in industrial agreements, and a greater focus on achieving a healthy work-life balance. It is notable that reductions in junior doctors' working hours have occurred despite the absence of a national regulatory framework for working hours. Informed by a growing international literature on working hours and their relation to patient and practitioner safety, accreditation bodies such as the Australian Commission on Safety and Quality in Health Care (ACSQHC) and the Australian Medical Council (AMC) are adjusting their standards to encourage improved work and training practices.

No Correlation Between Work-Hours and Operative Volumes

DEFF Research Database (Denmark)

Kjærgaard, Jane; Sillesen, Martin; Beier-Holgersen, Randi

2016-01-01

OBJECTIVE: Since 2003, United States residents have been limited to an 80-hour workweek. This has prompted concerns of reduced educational quality, especially inadequate operating exposure. In contrast, the Danish surgical specialty-training program mandates a cap on working hours of 37 per week....... We hypothesize that there is no direct correlation between work-hours and operative volume achieved during surgical residency. To test the hypothesis, we compare Danish and US operative volumes achieved during surgical residency training. DESIGN: Retrospective comparative study. PARTICIPANTS...... find no difference in overall surgical volumes between Danes and US residents during their surgical training. When time in training was accounted for, differences between weekly surgical volumes achieved were minor, indicating a lack of direct correlation between weekly work-hours and operative volumes...

The eighty-hour workweek: surgical attendings' perspectives.

Science.gov (United States)

Griner, Devan; Menon, Rema P; Kotwall, Cyrus A; Clancy, Thomas V; Hope, William W

2010-01-01

The year 2008 was a sentinel year in resident education; this was the first graduating general surgery class trained entirely under the 80-hour workweek. The purpose of this study was to evaluate attending surgeon perceptions of surgical resident attitudes and performance before and after duty-hour restrictions. An electronic survey was sent to all surgical teaching institutions in North Carolina. Both surgeon and hospital characteristics were documented. The survey consisted of questions designed to assess residents' attitudes/performance before and after the implementation of the work-hour restriction. In all, 77 surveys were returned (33% response rate). The survey demonstrated that 92% of educators who responded to the survey recognized a difference between the restricted residents (RRs) and the nonrestricted residents (NRRs), and most respondents (67%) attributed this to both the work-hour restrictions and the work ethic of current residents. Most attending surgeons reported no difference between the RRs and the NRRs in most categories; however, they identified a negative change in the areas of work ethic, technical skills development, decision-making/critical-thinking skills, and patient ownership among the RR group. Most surgeons expressed less trust (55%) with patient care and less confidence (68%) in residents' ability to operate independently in the RR group. Eighty-nine percent indicated that additional decreases in work hours would continue to hamper the mission of timely and comprehensive resident education. The perception of surgical educators was that RRs are clearly different from the NRRs and that the primary difference is in work ethic and duty-hour restrictions. Although similar in most attributes, RRs are perceived as having a lower baseline work ethic and a less developed technical skill set, decision-making ability, and sense of patient ownership. Subsequent study is needed to evaluate these concerns. Copyright 2010 Association of Program

Longer Opening Hours for the Library

CERN Multimedia

2001-01-01

The scientific information service. The CERN library is open 24 hours a day, 365 days a year. So how, you might be wondering, can they improve on that? The answer is in the detail. Although you can already use the library whenever you want, items can only be checked out when the front desk is staffed. A decision taken last week by the Scientific Information Policy Board now means that there will someone at the desk through out CERN's official working hours, with an extra 90 minutes at the end of the day so that people can check out material on their way home. In other words, the library will be open from 8:30 to 19:00, Monday to Friday. The library continues, of course, to be open 24 hours a day, all year round, and services provided via the digital library remain at your disposal day and night: http://library.cern.ch

29 CFR 778.318 - Productive and nonproductive hours of work.

Science.gov (United States)

2010-07-01

... Special Problems Effect of Failure to Count Or Pay for Certain Working Hours § 778.318 Productive and... Act; such nonproductive working hours must be counted and paid for. (b) Compensation payable for... which such nonproductive hours are properly counted as working time but no special hourly rate is...

Health and psychosocial effects of flexible working hours.

Science.gov (United States)

Janssen, Daniela; Nachreiner, Friedhelm

2004-12-01

To examine whether any impairments in health and social lives can be found under different kinds of flexible working hours, and whether such effects are related to specific characteristics of these working hours. Two studies -- a company based survey (N=660) and an internet survey (N=528) -- have been conducted. The first one was a questionnaire study (paper and pencil) on employees working under some 'typical' kinds of different flexible working time arrangements in different companies and different occupational fields (health care, manufacturing, retail, administration, call centres). The second study was an internet-based survey, using an adaptation of the questionnaire from the first study. The results of both studies consistently show that high variability of working hours is associated with increased impairments in health and well-being and this is especially true if this variability is company controlled. These effects are less pronounced if variability is self-controlled; however, autonomy does not compensate the effects of variability. Recommendations for an appropriate design of flexible working hours should be developed in order to minimize any impairing effects on health and psychosocial well-being; these recommendations should include -- besides allowing for discretion in controlling one's (flexible) working hours -- that variability in flexible working hours should be kept low (or at least moderate), even if this variability is self-controlled.

Impacts of extended working hours in logging

Science.gov (United States)

Dana Mitchell; Tom Gallagher

2008-01-01

Last year at the 2007 AIM in Minneapolis, MN, the authors presented the human factors impacts to consider when implementing extended working hours in the logging industry. In a continuation of this project, we have researched existing literature to identify possible actions that logging business owners can take to reduce the impact of extended working hours on their...

GFR, serum creatinine and 24-hour urine protein in evaluating renal function of patients with diabetes mellitus

International Nuclear Information System (INIS)

Chi Xiaohua; Li Guiping; Liu Feng; Wang Bing; Du Li; Deng Zhifang; Li Wei

2013-01-01

Background: Diabetes nephropathy is a common complication of diabetes mellitus patients. Early detection of renal impairment can improve the quality of life of patients. Purpose: The value of total GFR, serum creatinine, 24-hour urine protein excretion in diabetes mellitus patients with renal impairment were evaluated. Methods: A retrospective analysis of 147 patients with diabetes undergoing routine renal dynamic imaging was undertaken. The cases were divided into three groups according to the illness duration: group I of not more than five years, group 2 of five to ten years, Gr.3: more than ten years. The 22 renal transplant donors were selected as the normal control group, The total GFR, serum creatinine and 24-hour urinary protein excretion of all patients were measured before the treatments, and the data were statistically analyzed. Results: There was no significant differences in renal function between the two kidneys of in the diabetes mellitus patients (P=0.536). Serum creatinine and total GFR had significant correlation (R 2 =0.762), but no significant relationship between the 24-hour urine protein and the total GFR or serum creatinine. In the early and middle times of renal function impairment, the total GFR and serum creatinine have significant difference in different time periods (P<0.05). During the mid-late times of renal function impairment, total GFR and serum creatinine have no statistically significant differences (P value is 0.781, 0.297). 24-hour urine protein quality had no statistical differences in each stage. However: the total GFR is more sensitive than the serum creatinine in evaluation of early impairing of renal function. Conclusions: There is significant correlation between serum creatinine and total GFR. Both of them can reflect the degree of diabetic renal injury, but the total GFR is more sensitive than serum creatinine in early degree. 24-hour urine protein quantitative can not evaluate the degree of impaired renal function alone

Forecasting Day-Ahead Electricity Prices: Utilizing Hourly Prices

OpenAIRE

Raviv, Eran; Bouwman, Kees E.; van Dijk, Dick

2013-01-01

This discussion paper led to a publication in 'Energy Economics' , 2015, 50, 227-239. The daily average price of electricity represents the price of electricity to be delivered over the full next day and serves as a key reference price in the electricity market. It is an aggregate that equals the average of hourly prices for delivery during each of the 24 individual hours. This paper demonstrates that the disaggregated hourly prices contain useful predictive information for the daily average ...

Relationship Between Long Working Hours and Metabolic Syndrome Among Korean Workers.

Science.gov (United States)

Yu, Jungok

2017-03-01

This study investigated gender differences in the relationship between long working hours and metabolic syndrome. Data based on the Sixth National Health and Nutrition Examination Survey (2014) pertaining to a total of 1,145 paid workers were analyzed. Working hours were divided into three groups (40-51 hours/week, 52-59 hours/week, ≥ 60 hours/week). The relationship between working hours and metabolic syndrome was then analyzed after adjusting for general and occupational characteristics, using a multiple logistic regression model. Working 40-51 hours per week was associated with the lowest metabolic syndrome among female workers (11.2%), whereas it was associated with the highest metabolic syndrome among male workers (28.0%). After adjusting for general and occupational characteristics, female workers working≥60 hours per week showed odds ratios of 2.21 [95% confidence interval (1.07, 4.57)], compared to those who worked 40-51 hours per week. However, no clear association between long working hours and metabolic syndrome was found among male workers. The results suggest that working long hours, especially≥60 hours per week, is related to metabolic syndrome among female Korean workers. Copyright © 2017. Published by Elsevier B.V.

The effects of Smoke Free Work Hours in Danish municipalities

OpenAIRE

Tina Termansen; Simon Rask

2017-01-01

Since 2011, 15 Danish municipalities have implemented smoke free work hours, meaning that an employee working for the municipality may not smoke in his or her work time (about 7,5 hours a day). This is a much stricter prevention method, than former strategies preventing smoking mostly at locations and not during working hours. Research concerning the effects of smoke free work hours is non-existing. We therefore wish to look into the specific outcomes of smoke free work hours related to smoki...

The Associations Between Long Working Hours, Physical Inactivity, and Burnout.

Science.gov (United States)

Hu, Nien-Chih; Chen, Jong-Dar; Cheng, Tsun-Jen

2016-05-01

To examine the correlations between long working hours, physical activity, and burnout. A cross-sectional survey was administered to 1560 full-time employees, who underwent periodic health examinations in the year 2013. The subjects were divided into upper, middle, and lower tertiles according to the Copenhagen Burnout Inventory (CBI) score. The comparison of the high- and low-burnout groups revealed that long working hours were significantly correlated with burnout in a dose-dependent manner. Long working hours were more significantly associated with burnout among individuals younger than 50 years, females, and physically inactive employees. Long working hours are correlated with burnout when working over 40 hours per week and is even stronger when working over 60 hours per week. Limiting working hours to 40 weekly may be beneficial for the prevention of burnout. Physical activity helps reduce the risk of burnout.

Long working hours and sickness absence-a fixed effects design.

Science.gov (United States)

Bernstrøm, Vilde Hoff

2018-05-02

While long working hours seem to lead to impaired health, several studies have also shown that long working hours are related to lower levels of sickness absence. Previous studies on the relationship between long working hours and sickness absence have compared those who work long hours to those who do not, looking only at between-individual correlations. Those results might therefore reflect relatively stable differences between employees who typically work long hours and employees who typically do not. The aim of the present study is to examine within-individual correlations between long working hours and sickness absence. Records from the Human Resources department in a large Norwegian hospital from 2012 to 2015 provided objective data on both working hours and sickness absence. Two analyses were performed: a prospective cohort analysis to replicate the results from previous between-individual analyses and a second analysis of within-individual correlations using a fixed effect design. In line with existing research, both between-individual and within-individual analyses showed a negative relationship between long working hours (> 48 h/week) and short-term sickness absence (1-8 days) and no significant difference in incidence of long-term sickness absence (> 8 days). The results indicate that the negative relationship between long working hours and sickness absence is not due only to relatively stable individual differences between those who typically work long hours and those who do not. The results from both analyses therefore still contrast with previous research showing a negative relationship between long working hours and other health indicators.

The 24- hour pattern of intraocular pressure in suspected glaucoma patients

Directory of Open Access Journals (Sweden)

Shan-Shan Li

2018-05-01

Full Text Available AIM: To analyze the value of 24-hour intraocular pressure(IOPmonitoring in suspected glaucoma patients.METHODS: Totally 48 suspected glaucoma(96 eyeswere selected for 24-hour IOP monitoring by using Accupen tonometer(24-3000and non-contact tonometer(NCT, CT-80Afrom 9:30 to 7:30 next day(once in 2h. During 07:30 to 21:30, patients were measured in sitting position, while during 23:30 to 05:30 in both sitting and supine position.RESULTS: A morning peak of IOP was shown at 7:30 in traditional position by using two measures with 22.05±3.608mmHg of NCT and 19.79±4.147mmHg of Accupen tonometer. The peak IOP in habitual position appeared in 5:30 with 21.64±4.814mmHg. The lowest IOP occurred in both position at 21:30 with 15.73±3.649mmHg. Both positions showed IOP trend of going up at night and then declining in the morning. CONCLUSION: The peak IOP in suspected glaucoma occurs mostly at early morning. Supine IOP of sleeping time is higher than that of sitting position.

Unsupervised/supervised learning concept for 24-hour load forecasting

Energy Technology Data Exchange (ETDEWEB)

Djukanovic, M [Electrical Engineering Inst. ' Nikola Tesla' , Belgrade (Yugoslavia); Babic, B [Electrical Power Industry of Serbia, Belgrade (Yugoslavia); Sobajic, D J; Pao, Y -H [Case Western Reserve Univ., Cleveland, OH (United States). Dept. of Electrical Engineering and Computer Science

1993-07-01

An application of artificial neural networks in short-term load forecasting is described. An algorithm using an unsupervised/supervised learning concept and historical relationship between the load and temperature for a given season, day type and hour of the day to forecast hourly electric load with a lead time of 24 hours is proposed. An additional approach using functional link net, temperature variables, average load and last one-hour load of previous day is introduced and compared with the ANN model with one hidden layer load forecast. In spite of limited available weather variables (maximum, minimum and average temperature for the day) quite acceptable results have been achieved. The 24-hour-ahead forecast errors (absolute average) ranged from 2.78% for Saturdays and 3.12% for working days to 3.54% for Sundays. (Author)

Working hours and health behaviour among nurses at public hospitals.

Science.gov (United States)

Fernandes, Juliana da Costa; Portela, Luciana Fernandes; Rotenberg, Lúcia; Griep, Rosane Harter

2013-01-01

To analyse the differences between genders in the description in the professional, domestic and total work hours and assess its association with health-related behaviour among nurses. This is a transversal study carried out in 18 different public hospitals in the municipality of Rio de Janeiro. The data collection procedure was based on questionnaires. All nurses working with assistance were considered eligible (n=2,279). Men and women showed significant differences in relation to working hours. The female group showed longer domestic and total work hours when compared to the group of men. In contrast, the number of hours spent on professional work was higher among men. For the women, both the professional hours and total work hours were often associated with excessive consumption of fried food and also coffee, lack of physical exercise and also the greater occurrence of overweight and obesity. Both the professional hours and the domestic work hours need to be taken into account in studies about health, self-care and also the care provided within the context of nursing workers, particularly among women. The results add weight to the need for actions for health promotion in this occupational group and the importance of assessing the impact of long working hours on the health of workers.

Provisional Tic Disorder: What to tell parents when their child first starts ticcing [version 1; referees: 2 approved

Directory of Open Access Journals (Sweden)

Kevin J Black

2016-04-01

Full Text Available The child with recent onset of tics is a common patient in a pediatrics or child neurology practice. If the child’s first tic was less than a year in the past, the diagnosis is usually Provisional Tic Disorder (PTD. Published reviews by experts reveal substantial consensus on prognosis in this situation: the tics will almost always disappear in a few months, having remained mild while they lasted. Surprisingly, however, the sparse existing data may not support these opinions. PTD may have just as much importance for science as for clinical care. It provides an opportunity to prospectively observe the spontaneous remission of tics. Such prospective studies may aid identification of genes or biomarkers specifically associated with remission rather than onset of tics. A better understanding of tic remission may also suggest novel treatment strategies for Tourette syndrome, or may lead to secondary prevention of tic disorders. This review summarizes the limited existing data on the epidemiology, phenomenology, and outcome of PTD, highlights areas in which prospective study is sorely needed, and proposes that tic disorders may completely remit much less often than is generally believed.

Quality-control of an hourly rainfall dataset and climatology of extremes for the UK.

Science.gov (United States)

Blenkinsop, Stephen; Lewis, Elizabeth; Chan, Steven C; Fowler, Hayley J

2017-02-01

Sub-daily rainfall extremes may be associated with flash flooding, particularly in urban areas but, compared with extremes on daily timescales, have been relatively little studied in many regions. This paper describes a new, hourly rainfall dataset for the UK based on ∼1600 rain gauges from three different data sources. This includes tipping bucket rain gauge data from the UK Environment Agency (EA), which has been collected for operational purposes, principally flood forecasting. Significant problems in the use of such data for the analysis of extreme events include the recording of accumulated totals, high frequency bucket tips, rain gauge recording errors and the non-operation of gauges. Given the prospect of an intensification of short-duration rainfall in a warming climate, the identification of such errors is essential if sub-daily datasets are to be used to better understand extreme events. We therefore first describe a series of procedures developed to quality control this new dataset. We then analyse ∼380 gauges with near-complete hourly records for 1992-2011 and map the seasonal climatology of intense rainfall based on UK hourly extremes using annual maxima, n-largest events and fixed threshold approaches. We find that the highest frequencies and intensities of hourly extreme rainfall occur during summer when the usual orographically defined pattern of extreme rainfall is replaced by a weaker, north-south pattern. A strong diurnal cycle in hourly extremes, peaking in late afternoon to early evening, is also identified in summer and, for some areas, in spring. This likely reflects the different mechanisms that generate sub-daily rainfall, with convection dominating during summer. The resulting quality-controlled hourly rainfall dataset will provide considerable value in several contexts, including the development of standard, globally applicable quality-control procedures for sub-daily data, the validation of the new generation of very high

ACGME proposes dropping the 16 hour resident shift limit

Directory of Open Access Journals (Sweden)

Robbins RA

2016-11-01

Full Text Available No abstract available. Article truncated after 150 words. The Accreditation Council for Graduate Medical Education (ACGME is proposing that first-year residents would no longer be limited to 16-hour shifts during the 2017-2018 academic year under a controversial proposal released today (1. Instead, individual residency programs could assign first-year trainees to shifts as long as 28 hours, the current limit for all other residents. The 28-hour maximum includes 4 transitional hours that's designed in part to help residents improve continuity of care. The plan to revise training requirements does not change other rules designed to protect all residents from overwork. including the maximum80 hours per week. The ACGME capped the shifts of first-year residents at 16 hours in 2011 as a part of an ongoing effort to make trainee schedules more humane and avoid clinical errors caused by sleep deprivation. ACGME CEO Thomas Nasca, MD, told Medscape Medical News that the problem arises largely from first-year residents not being ...

The value of flexibility in power markets

International Nuclear Information System (INIS)

Goutte, Stephane; Vassilopoulos, Philippe

2017-01-01

In this paper we attempt to quantify the net revenues that can be captured by a flexible resource able to react to the short term price variations on the day-ahead and intra-day markets in Germany. We find that the difference between day-ahead and intra-day revenues for a flexible resource has been increasing (although the profitability has been decreasing on both markets). This difference is more pronounced once 15 mn price variations can be captured by a flexible resource. The net revenues from the local 15 mn auction (which is held 3 hours after the hourly 'coupled' day-ahead auction) are more than eight times higher than the day-ahead hourly auction but below the net revenues that can be captured with the high prices from the continuous market. The results of the backward-looking empirical estimations allow us to distinguish and quantify two components of flexibility: (1) the 'immediacy' value as we are approaching real-time and the urgency of the delivery increases (this value is revealed during the continuous intra-day process and is highly linked to the stochastic nature of power supply and demand (i.e. wind/solar forecasts, forced outages of thermal generation,...) forecast error risk), and (2) the 'flexibility' component as a resource can react to variations of shorter granularity (15 mn Vs 60 mn). We model and quantify the 'flexibility' component. (authors)

Modeling Hourly Resident Productivity in the Emergency Department.

Science.gov (United States)

Joseph, Joshua W; Henning, Daniel J; Strouse, Connie S; Chiu, David T; Nathanson, Larry A; Sanchez, Leon D

2017-08-01

Resident productivity, defined as new patients per hour, carries important implications for emergency department operations. In high-volume academic centers, essential staffing decisions can be made on the assumption that residents see patients at a static rate. However, it is unclear whether this model mirrors reality; previous studies have not rigorously examined whether productivity changes over time. We examine residents' productivity across shifts to determine whether it remained consistent. This was a retrospective cohort study conducted in an urban academic hospital with a 3-year emergency medicine training program in which residents acquire patients ad libitum throughout their shift. Time stamps of all patient encounters were automatically logged. A linear mixed model was constructed to predict productivity per shift hour. A total of 14,364 8- and 9-hour shifts were worked by 75 residents between July 1, 2010, and June 20, 2015. This comprised 6,127 (42.7%) postgraduate year (PGY) 1 shifts, 7,236 (50.4%) PGY-2 shifts, and 998 (6.9%) PGY-3 nonsupervisory shifts (Table 1). Overall, residents treated a mean of 10.1 patients per shift (SD 3.2), with most patients at Emergency Severity Index level 3 or more acute (93.8%). In the initial hour, residents treated a mean of 2.14 patients (SD 1.2), and every subsequent hour was associated with a significant decrease, with the largest in the second, third, and final hours. Emergency medicine resident productivity during a single shift follows a reliable pattern that decreases significantly hourly, a pattern preserved across PGY years and types of shifts. This suggests that resident productivity is a dynamic process, which should be considered in staffing decisions and studied further. Copyright © 2016 American College of Emergency Physicians. Published by Elsevier Inc. All rights reserved.

29 CFR 778.114 - Fixed salary for fluctuating hours.

Science.gov (United States)

2010-07-01

..., whatever their number, rather than for working 40 hours or some other fixed weekly work period, such a... compensation to the employee at a rate not less than the applicable minimum wage rate for every hour worked in..., in addition to such salary, for all overtime hours worked at a rate not less than one-half his...

Associations of Work Hours, Job Strain, and Occupation with Endothelial Function: The Multi-Ethnic Study of Atherosclerosis (MESA)

Science.gov (United States)

Charles, Luenda E.; Fekedulegn, Desta; Landsbergis, Paul; Burchfiel, Cecil M.; Baron, Sherry; Kaufman, Joel D.; Stukovsky, Karen Hinckley; Fujishiro, Kaori; Foy, Capri G.; Andrew, Michael E.; Roux, Ana V. Diez

2014-01-01

Objective To investigate associations of work hours, job control, job demands, job strain, and occupational category with brachial artery flow-mediated dilation (FMD) in 1,499 MESA participants. Methods FMD was obtained using high-resolution ultrasound. Mean values of FMD were examined across categories of occupation, work hours, and the other exposures using regression analyses. Results Occupational category was significantly associated with FMD overall, with blue-collar workers showing the lowest mean values: Management/professional=4.97±0.22%; sales/office=5.19±0.28%; services=4.73 ± 0.29%; and blue-collar workers=4.01±0.26% (adjusted P <0.001). There was evidence of effect modification by gender (interaction P=0.031): significant associations were observed among women (adjusted P =0.002) and nearly significant results among men (adjusted P=0.087). Other exposures were not significantly associated with FMD. Conclusions Differences in endothelial function may account for some of the variation in cardiovascular disease across occupational groups. PMID:25376409

12-hour shifts: an ethical dilemma for the nurse executive.

Science.gov (United States)

Lorenz, Susan G

2008-06-01

Flexible work hours, including 12-hour shifts, have become a common scheduling option for nurses. The author explores whether 12-hour shifts are an ethical scheduling option for nurses because recent research suggests that 12-hour shifts are a potential hazard to patients. A multistep model for ethical decision making, reflecting the concept of procedural justice, is used to examine this issue.

Development of functional foods for radiation workers - In vivo test on the effect of functional food for stem cell protection and preparing the provisional product

Energy Technology Data Exchange (ETDEWEB)

Kim, Sung Ho; Oh, Heon; Kim, Se Ra; Lee, Song Eun [Chonnam National University, Kwangju (Korea)

2000-04-01

We performed this study to determine (1) the effect of several oriental prescriptions as energy tonic (Chinese medical concept : Bu-Qi) or blood building (Chinese medical concept : Bu-Xie) decoction and its major ingredients, (2) the biological stability of irradiated Chinese medical prescriptions, and (3) the effect of several proposed prescriptions and its fractions on jejunal crypt survival (12 Gy), endogenous spleen colony formation(6.5 Gy), and apoptosis(2 Gy) in jejunal crypt cells of mice irradiated with high and low dose of gamma-irradiation. For the study of evaluation on the radioprotective effects of effective prescriptions, we tried the test on change of survival and hematological changes and finally we prepared the provisional product. 57 refs., 5 figs., 38 tabs. (Author)

Relationship Between Long Working Hours and Metabolic Syndrome Among Korean Workers

OpenAIRE

Jungok Yu, RN, PhD

2017-01-01

Purpose: This study investigated gender differences in the relationship between long working hours and metabolic syndrome. Methods: Data based on the Sixth National Health and Nutrition Examination Survey (2014) pertaining to a total of 1,145 paid workers were analyzed. Working hours were divided into three groups (40–51 hours/week, 52–59 hours/week, ≥ 60 hours/week). The relationship between working hours and metabolic syndrome was then analyzed after adjusting for general and occupationa...

Periodic self-rostering in shift work: correspondence between objective work hours, work hour preferences (personal fit), and work schedule satisfaction

NARCIS (Netherlands)

Ingre, M.; Äkerstedt, T.; Ekstedt, M.; Kecklund, L.G.

2012-01-01

Objectives The main objective of the present study was to investigate relative personal fit as the association between rated needs and preferences for work hours, on the one hand, and actual work hours, on the other hand, in three groups (hospital, call-center, and police) working with periodic

CERN takes part in Earth Hour

CERN Multimedia

Anaïs Vernède

2011-01-01

From 8.30 to 9.30 p.m. on Saturday, 26 March 2011, the Globe of Science and Innovation will be plunged into darkness to mark CERN's participation in Earth Hour. A growing number of countries and cities across the planet are involved in this global initiative against climate change, which was launched by the WWF in 2007.   The lights on the Globe were switched off for the 2009 Earth Hour event. Along with individuals, companies and tourist attractions in thousands of towns and cities all over the world participating in the fourth annual Earth Hour event, CERN will turn off the lights of the Globe for 60 minutes at 8.30 p.m. on Saturday 26 March. CERN's participation in the initiative is one of several examples of its commitment to respect the environment and keep its ecological footprint to the minimum. A recent example under the green transport heading was the replacement of part of CERN's petrol vehicle fleet with cars running on natural gas with a view to reducing air pollution. Other examples...

Ozone Nonattainment Areas - 1 Hour

Data.gov (United States)

U.S. Environmental Protection Agency — This data layer identifies areas in the U.S. where air pollution levels have not met the National Ambient Air Quality Standards (NAAQS) for Ozone - 1hour (Legacy...

Miscellanea Herpetologica Sanctithomae, with a provisional checklist of the terrestrial herpetofauna of São Tomé, Príncipe and Annobon islands.

Science.gov (United States)

CerÍaco, Luis M P; Marques, Mariana P; Bauer, Aaron M

2018-02-26

Five problematic cases regarding the presence of reptile taxa on the island of São Tomé (Gulf of Guinea) are reviewed. These cases deal with 1) the past presence of crocodilians in the island, 2) the putative type locality of Dipsas pulverulenta Fischer, 1856, 3) the dubious presence of a mamba (genus Dendroaspis) on the island, 4) an erroneous reference to the presence of Gastropyxis smaragdina, and 5) two specimens (Psammophis lineatus and Psammophis elegans) from Carl Weiss collection, currently deposited in the Zoological Museum of Hamburg and wrongly labelled as being from São Tomé island. A provisional checklist to the terrestrial herpetofauna of the three oceanic islands of the Gulf of Guinea-São Tomé, Príncipe and Annobon-is presented in order to clarify the current numbers of the endemics of each island, as well as to review and present current research.

Working hours and health behaviour among nurses at public hospitals

Directory of Open Access Journals (Sweden)

Juliana da Costa Fernandes

2013-09-01

Full Text Available OBJECTIVE: to analyse the differences between genders in the description in the professional, domestic and total work hours and assess its association with health-related behaviour among nurses. METHODS: this is a transversal study carried out in 18 different public hospitals in the municipality of Rio de Janeiro. The data collection procedure was based on questionnaires. All nurses working with assistance were considered eligible (n=2,279. RESULTS: men and women showed significant differences in relation to working hours. The female group showed longer domestic and total work hours when compared to the group of men. In contrast, the number of hours spent on professional work was higher among men. For the women, both the professional hours and total work hours were often associated with excessive consumption of fried food and also coffee, lack of physical exercise and also the greater occurrence of overweight and obesity. CONCLUSION: both the professional hours and the domestic work hours need to be taken into account in studies about health, self-care and also the care provided within the context of nursing workers, particularly among women. The results add weight to the need for actions for health promotion in this occupational group and the importance of assessing the impact of long working hours on the health of workers.

Do economic stresses influence child work hours on family farms?

Science.gov (United States)

Gadomski, Anne; de Long, Rachel; Burdick, Patrick; Jenkins, Paul

2005-01-01

Economic stresses are a frequently cited reason for children doing farm work. To explore the relationship between economic indicators and child agricultural work hours between January 2001 and October 2003. This ecologic study design compares trends in aggregate child work hours with national and regional economic indicators. Child work hours were obtained from quarterly surveillance data from a randomized field trial of agricultural task guidelines for children. 2,360 children living or working on 845 farms in central New York participated in the original study. The relationship between child work hours and three economic indicators: national all farm index (AFI) ratio, national fuel index, and regional milk prices was analyzed using times series plots, correlation, and multiple linear regression. The AFI ratio was positively correlated with child work hours (r = 0.49, p = 0.008) but there was no significant correlation between child work hours and fuel or milk prices. Multiple linear regression demonstrated that the relationship between AFI and child work hours is independent of a seasonal effect. Increased child work hours may be associated with periods of higher farm sector productivity, rather than economic stress per se. Findings are limited by the ecologic study design, use of national economic indicators, and the limited number of cycles of child work hours available for time series analysis. Economic conditions may influence decisions about children's farm work.

29 CFR 785.21 - Less than 24-hour duty.

Science.gov (United States)

2010-07-01

... Sleeping Time and Certain Other Activities § 785.21 Less than 24-hour duty. An employee who is required to be on duty for less than 24 hours is working even though he is permitted to sleep or engage in other... 29 Labor 3 2010-07-01 2010-07-01 false Less than 24-hour duty. 785.21 Section 785.21 Labor...

Work-Family Conflict, Children, and Hour Mismatches in Australia

Science.gov (United States)

Reynolds, Jeremy; Aletraris, Lydia

2007-01-01

This article helps integrate research on work hours and work-family issues by examining how work-family conflict is related to the desire for more and fewer hours of work. Using the first wave of the Household Income and Labor Dynamics in Australia survey, we find that work-to-family conflict is associated with a desire for fewer hours of work.…

Efficacy and duration of benazepril plus amlodipine or hydrochlorothiazide on 24-hour ambulatory systolic blood pressure control.

Science.gov (United States)

Jamerson, Kenneth A; Devereux, Richard; Bakris, George L; Dahlöf, Björn; Pitt, Bertram; Velazquez, Eric J; Weir, Matthew; Kelly, Roxzana Y; Hua, Tsushung A; Hester, Allen; Weber, Michael A

2011-02-01

The combination of benazepril plus amlodipine was shown to be more effective than benazepril plus hydrochlorothiazide in reducing cardiovascular events in the Avoiding Cardiovascular Events through Combination Therapy in Patients Living with Systolic Hypertension (ACCOMPLISH) trial. There was a small difference in clinic systolic blood pressure between the treatment arms favoring benazepril plus amlodipine. Ambulatory blood pressure monitoring provides a more rigorous estimate of blood pressure effects. A subset of 573 subjects underwent ambulatory blood pressure monitoring during year 2. Readings were obtained every 20 minutes during a 24-hour period. Between-treatment differences (benazepril plus amlodipine versus benazepril plus hydrochlorothiazide) in mean values were analyzed using ANOVA. Treatment comparisons with respect to categorical variables were made using Pearson's χ². At year 2, the treatment groups did not differ significantly in 24-hour mean daytime or nighttime blood pressures (values of 123.9, 125.9, and 118.1 mm Hg for benazepril plus amlodipine group versus 122.3, 124.1, and 116.9 for the benazepril plus hydrochlorothiazide group), with mean between-group differences of 1.6, 1.8, and 1.2 mm Hg, respectively. Blood pressure control rates (24-hour mean systolic blood pressure <130 mm Hg on ambulatory blood pressure monitoring) were greater than 80% in both groups. Nighttime systolic blood pressure provided additional risk prediction after adjusting for the effects of drugs. The 24-hour blood pressure control was similar in both treatment arms, supporting the interpretation that the difference in cardiovascular outcomes favoring a renin angiotensin system blocker combined with amlodipine rather than hydrochlorothiazide shown in the ACCOMPLISH trial was not caused by differences in blood pressure, but instead intrinsic properties (metabolic or hemodynamic) of the combination therapies.

A comparative study to check fracture strength of provisional fixed partial dentures made of autopolymerizing polymethylmethacrylate resin reinforced with different materials: An in vitro study.

Science.gov (United States)

Gupt, Parikshit; Nagpal, Archana; Samra, Rupandeep Kaur; Verma, Ramit; Kaur, Jasjeet; Abrol, Surbhi

2017-01-01

The purpose of the study was to evaluate the fracture strength of provisional fixed partial dentures made of autopolymerizing polymethylmethacrylate (PMMA) resin using different types of reinforcement materials to determine the best among them. Fifty samples were made (10 samples for each group) with autopolymerizing PMMA resin using reinforcement materials (stainless steel wire: looped and unlooped and glass fiber: loose and unidirectional) as 3-unit posterior bridge. The test specimens were divided into five groups depending on the reinforcing material as Group I, II, III, IV, and V; Group I: PMMA unreinforced (control group), Group II: PMMA reinforced with stainless steel wire (straight ends), Group III: PMMA reinforced with stainless steel wire (looped ends), Group IV: PMMA reinforced with unidirectional glass fibers, and Group V: PMMA reinforced with randomly distributed glass fibers. Universal testing machine was used to evaluate and compare the fracture strength of samples. Comparison of mean ultimate force and ultimate stress was done employing one-way analysis of variance and Tukey's post hoc tests. The highest and lowest mean ultimate force and mean ultimate stress were of Group IV and I, respectively. Tukey's post hoc honestly significant difference multiple comparison for mean ultimate force and stress shows the increase in strength to be statistically significant ( P 0.05). Unidirectional glass fibers showed the maximum strength, which was comparable to mean values of both stainless steel wire groups. Low cost and easy technique of using stainless steel wire make it the material of choice over the unidirectional glass fiber for reinforcement in nonesthetic areas where high strength is required.

ENSI's view on NTB-10-01 'Evaluation of the geological documents for the provisional safety assessment in SGT Stage 2' - Sectoral Plan 'Deep Geological Disposal'

International Nuclear Information System (INIS)

2011-03-01

host rock with regard to gas production through corrosion or decay in a deep repository, ENSI considers that the understanding already won in SGT Stage 1 on Opalinus clay is sufficient also for Stage 2; some more information is needed for the other rock types. As for the geological tectonic conditions at the foreseen sites, the data set available so far enables provisional safety analyses for all sites. For HAA the information presented by NAGRA on the long term development has to be supplemented with geomorphological development. For the Alpine space and especially the Wellenberg site, ENSI considers that the long time stability regarding elevation rates, erosion, seismicity, neotectonics and deep erosion through glaciers is critical. The knowledge of the hydrogeological situation is suitable for all sites; with the extensions foreseen by NAGRA they will reach the knowledge stage necessary for SGT Stage 2, although the transportation paths through the host rock and frame rocks are treated on a simplified way. The knowledge on the geochemical conditions is sufficiently accurate for provisional safety analyses and site comparisons, but some processes like salinity, diffusion, cement stability or corrosion of mechanical components may influence the porosity of host rocks; for SGT Stage 3 they will require more detailed considerations. On the basis of the hydrogeological situations, the exfiltering of deep underground water to the biosphere was modeled in a way sufficient for SGT Stage 2 under the assumption that the resurging water will appear at the ground of deep valleys, what has to be confirmed by site specific calculations. By means of test calculations the effect of inaccuracies in the dataset has been evaluated. It appears that the calculated dose values for the considered sites are robust against these uncertainties. In view of the next SGT Stage 3, some more points have to be considered like the distance between waste repository and drink, mineral or thermal

Fasting for 24 hours heightens reward from food and food-related cues.

Science.gov (United States)

Cameron, Jameason D; Goldfield, Gary S; Finlayson, Graham; Blundell, John E; Doucet, Eric