Evaluation of gum mastic (Pistacia lentiscus as a microencapsulating and matrix forming material for sustained drug release

Directory of Open Access Journals (Sweden)

Dinesh M. Morkhade

2017-09-01

Full Text Available In this study, a natural gum mastic was evaluated as a microencapsulating and matrix-forming material for sustained drug release. Mastic was characterized for its physicochemical properties. Microparticles were prepared by oil-in-oil solvent evaporation method. Matrix tablets were prepared by wet and melt granulation techniques. Diclofenac sodium (DFS and diltiazem hydrochloride (DLTZ were used as model drugs. Mastic produced discrete and spherical microspheres with DLTZ and microcapsules with DFS. Particle size and drug loading of microparticles was in the range of 22–62 µm and 50–87%, respectively. Increase in mastic: drug ratio increased microparticle size, improved drug loading and decreased the drug release rate. Microparticles with gum: drug ratio of 2:1 could sustain DLTZ release up to 12 h and released 57% DFS in 12 h. Mastic produced tablets with acceptable pharmacotechnical properties. A 30% w/w of mastic in tablet could sustain DLTZ release for 5 h from wet granulation, and DFS release for 8 h and 11 h from wet and melt granulation, respectively. Results revealed that a natural gum mastic can be used successfully to formulate matrix tablets and microparticles for sustained drug release.

Ocular Insert: Dosage Form for Sustain Opthalmic Drug Delivery

Directory of Open Access Journals (Sweden)

Sunil Kumar

2012-06-01

Full Text Available Except for skin, the eye is the most easily accessible site for topical administration of a medication. Traditional topical ophthalmic formulations (eye drops and ointments have poor bioavailability because of rapid pre-corneal elimination, conjunctival absorption, solution drainage by gravity, induced lacrimation and normal tear turnover. This leads to frequent installations of concentrated medication to achieve a therapeutic effect. The typical “pulse-entry” type drug release observed with ocular aqueous solutions (eye drops, suspensions and ointments can be replaced by more controlled, sustained, and continuous drug delivery, using a controlled-release ocular drug delivery system. Ocular inserts are solid or semisolid sterile preparations, of appropriate size and shape, designed to be inserted behind the eyelid or held on the eye and to deliver drugs for topical or systemic effect. These are polymeric systems into which the drug is incorporated as a solution or dispersion. They are better tolerated as to drainage and tear flow compared with other ophthalmic formulation and produce reliable drug release in the conjunctival cul-de-sac.

Effect of a drug allergy educational program and antibiotic prescribing guideline on inpatient clinical providers' antibiotic prescribing knowledge.

Science.gov (United States)

Blumenthal, Kimberly G; Shenoy, Erica S; Hurwitz, Shelley; Varughese, Christy A; Hooper, David C; Banerji, Aleena

2014-01-01

Inpatient providers have varying levels of knowledge in managing patients with drug and/or penicillin (PCN) allergy. Our objectives were (1) to survey inpatient providers to ascertain their baseline drug allergy knowledge and preparedness in caring for patients with PCN allergy, and (2) to assess the impact of an educational program paired with the implementation of a hospital-based clinical guideline. We electronically surveyed 521 inpatient providers at a tertiary care medical center at baseline and again 6 weeks after an educational initiative paired with clinical guideline implementation. The guideline informed providers on drug allergy history taking and antibiotic prescribing for inpatients with PCN or cephalosporin allergy. Of 323 unique responders, 42% (95% CI, 37-48%) reported no prior education in drug allergy. When considering those who responded to both surveys (n = 213), we observed a significant increase in knowledge about PCN skin testing (35% vs 54%; P allergy over time (54% vs 80%; P allergy was severe significantly improved (77% vs 92%; P = .03). Other areas, including understanding absolute contraindications to receiving a drug again and PCN cross-reactivity with other antimicrobials, did not improve significantly. Inpatient providers have drug allergy knowledge deficits but are interested in tools to help them care for inpatients with drug allergies. Our educational initiative and hospital guideline implementation were associated with increased PCN allergy knowledge in several crucial areas. To improve care of inpatients with drug allergy, more research is needed to evaluate hospital policies and sustainable educational tools. Copyright © 2014 American Academy of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

Preparation and properties of a drug sustained-release hydrogel film

International Nuclear Information System (INIS)

Yue Ling; Yang Zhanshan; Yang Shuqin; Li Qinghua

2009-01-01

A hydrogel film of drug sustained-release was prepared to accelerate wound healing. The hydrogel films containing drug or not were prepared by the freezing and thawing process. Their properties such as the physicochemical property and the drug release behavior in vitro were studied. Effect of the freezing and thawing process on antimicrobial efficacy of the gentamicin was evaluated by diffusion method. The results indicate that swelling ratio of the hydrogel films freezed for 4h is 841.21% and their gel fraction, tensile strength and elongation at break is 96.10%, 0.222 MPa and 673.50% respectively. The antimicrobial efficacy of the gentamicin has no change. The hydrogel film contained gentamicin releases the antibiotic to peak during 6 h with the cumulative drug release rate of 59.57%. The drug releases continually up to the 5th day. The drug delivery conforms to Higuchi kinetic equation, and mechanism of the drug release is matrix diffusion. The results show that the hydrogel film prepared by the freezing and thawing process display satisfactory physicochemical properties and can be used as a drug delivery system. (authors)

Floating solid cellulose nanofibre nanofoams for sustained release of the poorly soluble model drug furosemide

DEFF Research Database (Denmark)

Svagan, Anna Justina; Müllertz, Anette; Löbmann, Korbinian

2017-01-01

OBJECTIVES: This study aimed to prepare a furosemide-loaded sustained release cellulose nanofibre (CNF)-based nanofoams with buoyancy. METHODS: Dry foams consisting of CNF and the model drug furosemide at concentrations of 21% and 50% (w/w) have been prepared by simply foaming a CNF-drug suspension...... followed by drying. The resulting foams were characterized towards their morphology, solid state properties and dissolution kinetics. KEY FINDINGS: Solid state analysis of the resulting drug-loaded foams revealed that the drug was present as an amorphous sodium furosemide salt and in form of furosemide...... form I crystals embedded in the CNF foam cell walls. The foams could easily be shaped and were flexible, and during the drug release study, the foam pieces remained intact and were floating on the surface due to their positive buoyancy. Both foams showed a sustained furosemide release compared...

Dual Cross-Linked Carboxymethyl Sago Pulp-Gelatine Complex Coacervates for Sustained Drug Delivery

Directory of Open Access Journals (Sweden)

Saravanan Muniyandy

2015-06-01

Full Text Available In the present work, we report for the first time the complex coacervation of carboxymethyl sago pulp (CMSP with gelatine for sustained drug delivery. Toluene saturated with glutaraldehyde and aqueous aluminum chloride was employed as cross-linkers. Measurements of zeta potential confirm neutralization of two oppositely charged colloids due to complexation, which was further supported by infrared spectroscopy. The coacervates encapsulated a model drug ibuprofen and formed microcapsules with a loading of 29%–56% w/w and an entrapment efficiency of 85%–93% w/w. Fresh coacervates loaded with drug had an average diameter of 10.8 ± 1.93 µm (n = 3 ± s.d.. The coacervates could encapsulate only the micronized form of ibuprofen in the absence of surfactant. Analysis through an optical microscope evidenced the encapsulation of the drug in wet spherical coacervates. Scanning electron microscopy revealed the non-spherical geometry and surface roughness of dried drug-loaded microcapsules. X-ray diffraction, differential scanning calorimetry and thermal analysis confirmed intact and crystalline ibuprofen in the coacervates. Gas chromatography indicated the absence of residual glutaraldehyde in the microcapsules. Dual cross-linked microcapsules exhibited a slower release than mono-cross-linked microcapsules and could sustain the drug release over the period of 6 h following Fickian diffusion.

Dissolving and biodegradable microneedle technologies for transdermal sustained delivery of drug and vaccine

Directory of Open Access Journals (Sweden)

Hong X

2013-09-01

Full Text Available Xiaoyun Hong,1,2,* Liangming Wei,3,* Fei Wu,2,* Zaozhan Wu,2 Lizhu Chen,2 Zhenguo Liu,1 Weien Yuan2 1Department of Neurology, Xinhua Hospital, Shanghai, People's Republic of China; 2School of Pharmacy, Shanghai JiaoTong University, Shanghai, People's Republic of China; 3Research Institute of Micro/Nano Science and Technology, Shanghai JiaoTong University, Shanghai, People's Republic of China *These authors contributed equally to this work Abstract: Microneedles were first conceptualized for drug delivery many decades ago, overcoming the shortages and preserving the advantages of hypodermic needle and conventional transdermal drug-delivery systems to some extent. Dissolving and biodegradable microneedle technologies have been used for transdermal sustained deliveries of different drugs and vaccines. This review describes microneedle geometry and the representative dissolving and biodegradable microneedle delivery methods via the skin, followed by the fabricating methods. Finally, this review puts forward some perspectives that require further investigation. Keywords: microneedle, dissolving, biodegradable, sustained release

Generic medicines: solutions for a sustainable drug market?

Science.gov (United States)

Dylst, Pieter; Vulto, Arnold; Godman, Brian; Simoens, Steven

2013-10-01

Generic medicines offer equally high-quality treatment as originator medicines do at much lower prices. As such, they represent a considerable opportunity for authorities to obtain substantial savings. At the moment, the pharmaceutical landscape is changing and many pharmaceutical companies have altered their development and commercial strategies, combining both originator and generic divisions. In spite of this, the generic medicines industry is currently facing a number of challenges: delayed market access; the limited price differential with originator medicines; the continuous downwards pressure on prices; and the negative perception regarding generic medicines held by some key stakeholder groups. This could jeopardize the long-term sustainability of the generic manufacturing industry. Therefore, governments must focus on demand-side policies, alongside policies to accelerate market access, as the generic medicines industry will only be able to deliver competitive and sustainable prices if they are ensured a high volume. In the future, the generic medicines industry will increasingly look to biosimilars and generic versions of orphan drugs to expand their business.

Dissolving and biodegradable microneedle technologies for transdermal sustained delivery of drug and vaccine

Science.gov (United States)

Hong, Xiaoyun; Wei, Liangming; Wu, Fei; Wu, Zaozhan; Chen, Lizhu; Liu, Zhenguo; Yuan, Weien

2013-01-01

Microneedles were first conceptualized for drug delivery many decades ago, overcoming the shortages and preserving the advantages of hypodermic needle and conventional transdermal drug-delivery systems to some extent. Dissolving and biodegradable microneedle technologies have been used for transdermal sustained deliveries of different drugs and vaccines. This review describes microneedle geometry and the representative dissolving and biodegradable microneedle delivery methods via the skin, followed by the fabricating methods. Finally, this review puts forward some perspectives that require further investigation. PMID:24039404

A biodegradable, sustained-released, prednisolone acetate microfilm drug delivery system effectively prolongs corneal allograft survival in the rat keratoplasty model.

Directory of Open Access Journals (Sweden)

Yu-Chi Liu

Full Text Available Frequent and long-term use of topical corticosteroids after corneal transplantation is necessary to prevent graft rejection. However, it relies heavily on patient compliance, and sustained therapeutic drug levels are often not achieved with administration of topical eye drops. A biodegradable drug delivery system with a controlled and sustained drug release may circumvent these limitations. In this study, we investigated the efficacy of a prednisolone acetate (PA-loaded poly (d,l-lactide-co-ε-caprolactone (PLC microfilm drug delivery system on promoting the survival of allogeneic grafts after penetrating keratoplasty (PK using a rat model. The drug release profiles of the microfilms were characterized (group 1. Subsequently, forty-eight PK were performed in four experimental groups: syngeneic control grafts (group 2, allogeneic control grafts (group 3, allogeneic grafts with subconjunctivally-implanted PA microfilm (group 4, and allogeneic grafts with PA eye drops (group 5; n = 12 in each. PA-loaded microfilm achieved a sustained and steady release at a rate of 0.006-0.009 mg/day, with a consistent aqueous drug concentration of 207-209 ng/ml. The mean survival days was >28 days in group 2, 9.9±0.8 days in group 3, 26.8±2.7 days in group 4, and 26.4±3.4 days in group 5 (P = 0.023 and P = 0.027 compared with group 3. Statistically significant decrease in CD4+, CD163+, CD 25+, and CD54+ cell infiltration was observed in group 4 and group 5 compared with group 3 (P<0.001. There was no significant difference in the mean survival and immunohistochemical analysis between group 4 and group 5. These results showed that sustained PA-loaded microfilm effectively prolongs corneal allograft survival. It is as effective as conventional PA eye drops, providing a promising clinically applicable alternative for patients undergoing corneal transplantation.

Tannate complexes of antihistaminic drug: sustained release and taste masking approaches.

Science.gov (United States)

Rahman, Ziyaur; Zidan, Ahmed S; Berendt, Robert T; Khan, Mansoor A

2012-01-17

The aim of this investigation was to evaluate the complexation potential of brompheniramine maleate (BPM) and tannic acid (TA) for sustained release and taste masking effects. The complexes (1:1-1:7 TA to BPM ratio) were prepared by the solvent evaporation method using methanol, phosphate buffer pH 6.8 or 0.1N HCl as common solvents. The complexes were characterized microscopically by scanning electron microscopy (SEM), chemically by Fourier transform infrared (FTIR) and solid-state NMR (SSNMR), thermally by differential scanning calorimetry (DSC), for crystallinity by powder X-ray powder diffraction (PXRD), for organoleptic evaluation by electronic tongue (e-tongue), and for solubility in 0.1N HCl and phosphate buffer pH 6.8. The dissolution studies were carried out using the USP II method at 50 rpm in 500 ml of dissolution media (0.1N HCl or phosphate buffer pH 6.8). SEM images revealed that the morphology of complexes were completely different from the individual components, and all complexes had the same morphological characteristics, irrespective of the solvent used for their preparation, pH or ratio of BPM and TA. The FTIR spectra showed the presence of chemical interactions between the TA and BPM. DSC, PXRD and SSNMR indicated that the drug lost its crystalline nature by formation of the complex. Complexation has significantly reduced the solubility of BPM and sustained the drug release up to 24h in phosphate buffer pH 6.8 media. The bitter taste of the BPM was completely masked which was indicated by Euclidean distance values which was far from the drug but near to its placebo in the complexes in all ratios studied. The taste masked complexes can be potentially developed as suitable dosage forms for pediatric use. In summary, complexation of BPM and TA effectively sustained the dissolution and masked the bitter taste of drug for the development of suitable dosage forms for pediatric use. Published by Elsevier B.V.

Sustained ophthalmic delivery of highly soluble drug using pH-triggered inner layer-embedded contact lens.

Science.gov (United States)

Zhu, Qiang; Cheng, Hongbo; Huo, Yingnan; Mao, Shirui

2018-06-10

In the present work the feasibility of using inner layer-embedded contact lenses (CLs) to achieve sustained release of highly water soluble drug, betaxolol hydrochloride (BH) on the ocular surface was investigated. Blend film of cellulose acetate and Eudragit S100 was selected as the inner layer, while silicone hydrogel was used as outer layer to construct inner layer-embedded contact lenses. Influence of polymer ratio in the blend film on in vitro drug release behavior in phosphate buffered solution or simulated tear fluid was studied and drug-polymer interaction, erosion and swelling of the blend film were characterized to better understand drug-release mechanism. Storage stability of the inner layer-embedded contact lenses in phosphate buffer solution was also conducted, with ignorable drug loss and negligible change in drug release pattern within 30 days. In vivo pharmacokinetic study in rabbits showed sustained drug release for over 240 h in tear fluid, indicating prolonged drug precorneal residence time. In conclusion, cellulose acetate/Eudragit S100 inner layer-embedded contact lenses are quite promising as controlled-release carrier of highly water soluble drug for ophthalmic delivery. Copyright © 2018 Elsevier B.V. All rights reserved.

An integrated decision making model for the selection of sustainable forward and reverse logistic providers

DEFF Research Database (Denmark)

Govindan, Kannan; Agarwal, Vernika; Darbari, Jyoti Dhingra

2017-01-01

Due to rising concerns for environmental sustainability, the Indian electronic industry faces immense pressure to incorporate effective sustainable practices into the supply chain (SC) planning. Consequently, manufacturing enterprises (ME) are exploring the option of re-examining their SC...... strategies and taking a formalized approach towards a sustainable partnership with logistics providers. To begin with, it is imperative to associate with sustainable forward and reverse logistics providers to manage effectively the upward and downstream flows simultaneously. In this context, this paper...... improve the sustainable performance value of the SC network and secure reasonable profits. The managerial implications drawn from the result analysis provide a sustainable framework to the ME for enhancing its corporate image....

[Fabrication of a new composite scaffold material for delivering rifampicin and its sustained drug release in rats].

Science.gov (United States)

Ma, Xue-Ming; Lin, Zhen; Zhang, Jia-Wei; Sang, Chao-Hui; Qu, Dong-Bin; Jiang, Jian-Ming

2016-03-01

To fabricate a new composite scaffold material as an implant for sustained delivery of rifampicin and evaluate its performance of sustained drug release and biocompatibility. The composite scaffold material was prepared by loading poly(lactic-co-glycolic) acid (PLGA) microspheres that encapsulated rifampicin in a biphasic calcium composite material with a negative surface charge. The in vitro drug release characteristics of the microspheres and the composite scaffold material were evaluated; the in vivo drug release profile of the composite scaffold material implanted in a rat muscle pouch was evaluated using high-performance liquid chromatography. The biochemical parameters of the serum and liver histopathologies of the rats receiving the transplantation were observed to assess the biocompatibility of the composite scaffold material. The encapsulation efficiency and drug loading efficiency of microspheres were (56.05±5.33)% and (29.80±2.88)%, respectively. The cumulative drug release rate of the microspheres in vitro was (94.19±5.4)% at 28 days, as compared with the rate of (82.23±6.28)% of composite scaffold material. The drug-loaded composite scaffold material showed a good performance of in vivo drug release in rats, and the local drug concentration still reached 16.18±0.35 µg/g at 28 days after implantation. Implantation of the composite scaffold material resulted in transient and reversible liver injury, which was fully reparred at 28 days after the implantation. The composite scaffold material possesses a good sustained drug release capacity and a good biocompatibility, and can serve as an alternative approach to conventional antituberculous chemotherapy.

Advances in Hybrid Polymer-Based Materials for Sustained Drug Release

Directory of Open Access Journals (Sweden)

Lígia N. M. Ribeiro

2017-01-01

Full Text Available The use of biomaterials composed of organic pristine components has been successfully described in several purposes, such as tissue engineering and drug delivery. Drug delivery systems (DDS have shown several advantages over traditional drug therapy, such as greater therapeutic efficacy, prolonged delivery profile, and reduced drug toxicity, as evidenced by in vitro and in vivo studies as well as clinical trials. Despite that, there is no perfect delivery carrier, and issues such as undesirable viscosity and physicochemical stability or inability to efficiently encapsulate hydrophilic/hydrophobic molecules still persist, limiting DDS applications. To overcome that, biohybrid systems, originating from the synergistic assembly of polymers and other organic materials such as proteins and lipids, have recently been described, yielding molecularly planned biohybrid systems that are able to optimize structures to easily interact with the targets. This work revised the biohybrid DDS clarifying their advantages, limitations, and future perspectives in an attempt to contribute to further research of innovative and safe biohybrid polymer-based system as biomaterials for the sustained release of active molecules.

Providing Sustainable Food in Urban Thailand

NARCIS (Netherlands)

Kantamaturapoj, K.; Oosterveer, P.J.M.; Spaargaren, G.

2013-01-01

Increasing demand for sustainable foods can be a driver for environmental improvements along the food-supply chain as a whole. Research in Western Europe has confirmed the importance of distribution channel s in supplying sustainable food and particularly in how they are able to combine consumer

Pharmacokinetics of Sustained-Release Analgesics in Mice

Science.gov (United States)

Kendall, Lon V; Hansen, Ryan J; Dorsey, Kathryn; Kang, Sooah; Lunghofer, Paul J; Gustafson, Daniel L

2014-01-01

Buprenorphine and carprofen, 2 of the most commonly used analgesics in mice, must be administered every 8 to 12 h to provide sustained analgesia. Sustained-release (SR) formulations of analgesics maintain plasma levels that should be sufficient to provide sustained analgesia yet require less frequent dosing and thus less handling of and stress to the animals. The pharmacokinetics of SR formulations of buprenorphine (Bup-SR), butorphanol (Butp-SR), fentanyl (Fent-SR), carprofen (Carp-SR), and meloxicam (Melox-SR) were evaluated in mice over 72 h and compared with those of traditional, nonSR formulations. Bup-SR provided plasma drug levels greater than the therapeutic level for the first 24 to 48 h after administration, but plasma levels of Bup-HCl fell below the therapeutic level by 4 h. Fent-SR maintained plasma levels greater than reported therapeutic levels for 12 h. Therapeutic levels of the remaining drugs are unknown, but Carp-SR provided plasma drug levels similar to those of Carp for the first 24 h after administration, whereas Melox-SR had greater plasma levels than did Melox for the first 8 h. Butp-SR provided detectable plasma drug levels for the first 24 h, with a dramatic decrease over the first 4 h. These results indicate that Bup-SR provides a stable plasma drug level adequate for analgesia for 24 to 48 h after administration, whereas Carp-SR, Melox-SR, Fent-SR, and Butp-SR would require additional doses to provide analgesic plasma levels beyond 24 h in mice. PMID:25255070

Solid cellulose nanofiber based foams - Towards facile design of sustained drug delivery systems

DEFF Research Database (Denmark)

Svagan, Anna J; Benjamins, Jan-Willem; Al-Ansari, Zeinab

2016-01-01

acceptable surfactant (lauric acid sodium salt). The drug was suspended in the wet-stable foams followed by a drying step to obtain dry foams. Flexible cellular solid materials of different thicknesses, shapes and drug loadings (up to 50wt%) could successfully be prepared. The drug was released from...... the solid foams in a diffusion-controlled, sustained manner due to the presence of intact air bubbles which imparted a tortuous diffusion path. The diffusion coefficient was assessed using Franz cells and shown to be more than one order of magnitude lower for the cellular solids compared to the bubble...

Direct encapsulation of water-soluble drug into silica microcapsules for sustained release applications

International Nuclear Information System (INIS)

Wang Jiexin; Wang Zhihui; Chen Jianfeng; Yun, Jimmy

2008-01-01

Direct encapsulation of water-soluble drug into silica microcapsules was facilely achieved by a sol-gel process of tetraethoxysilane (TEOS) in W/O emulsion with hydrochloric acid (HCl) aqueous solution containing Tween 80 and drug as well as cyclohexane solution containing Span 80. Two water-soluble drugs of gentamicin sulphate (GS) and salbutamol sulphate (SS) were chosen as model drugs. The characterization of drug encapsulated silica microcapsules by scanning electronic microscopy (SEM), FTIR, thermogravimetry (TG) and N 2 adsorption-desorption analyses indicated that drug was successfully entrapped into silica microcapsules. The as-prepared silica microcapsules were uniform spherical particles with hollow structure, good dispersion and a size of 5-10 μm, and had a specific surface area of about 306 m 2 /g. UV-vis and thermogravimetry (TG) analyses were performed to determine the amount of drug encapsulated in the microcapsules. The BJH pore size distribution (PSD) of silica microcapsules before and after removing drug was examined. In vitro release behavior of drug in simulated body fluid (SBF) revealed that such system exhibited excellent sustained release properties

Bimatoprost-loaded ocular inserts as sustained release drug delivery systems for glaucoma treatment: in vitro and in vivo evaluation.

Directory of Open Access Journals (Sweden)

Juçara Ribeiro Franca

Full Text Available The purpose of the present study was to develop and assess a novel sustained-release drug delivery system of Bimatoprost (BIM. Chitosan polymeric inserts were prepared using the solvent casting method and characterized by swelling studies, infrared spectroscopy, differential scanning calorimetry, drug content, scanning electron microscopy and in vitro drug release. Biodistribution of 99mTc-BIM eye drops and 99mTc-BIM-loaded inserts, after ocular administration in Wistar rats, was accessed by ex vivo radiation counting. The inserts were evaluated for their therapeutic efficacy in glaucomatous Wistar rats. Glaucoma was induced by weekly intracameral injection of hyaluronic acid. BIM-loaded inserts (equivalent to 9.0 µg BIM were administered once into conjunctival sac, after ocular hypertension confirmation. BIM eye drop was topically instilled in a second group of glaucomatous rats for 15 days days, while placebo inserts were administered once in a third group. An untreated glaucomatous group was used as control. Intraocular pressure (IOP was monitored for four consecutive weeks after treatment began. At the end of the experiment, retinal ganglion cells and optic nerve head cupping were evaluated in the histological eye sections. Characterization results revealed that the drug physically interacted, but did not chemically react with the polymeric matrix. Inserts sustainedly released BIM in vitro during 8 hours. Biodistribution studies showed that the amount of 99mTc-BIM that remained in the eye was significantly lower after eye drop instillation than after chitosan insert implantation. BIM-loaded inserts lowered IOP for 4 weeks, after one application, while IOP values remained significantly high for the placebo and untreated groups. Eye drops were only effective during the daily treatment period. IOP results were reflected in RGC counting and optic nerve head cupping damage. BIM-loaded inserts provided sustained release of BIM and seem to be a

Is environmental sustainability a strategic priority for logistics service providers?

Science.gov (United States)

Evangelista, Pietro; Colicchia, Claudia; Creazza, Alessandro

2017-08-01

Despite an increasing number of third-party logistics service providers (3PLs) regard environmental sustainability as a key area of management, there is still great uncertainty on how 3PLs implement environmental strategies and on how they translate green efforts into practice. Through a multiple case study analysis, this paper explores the environmental strategies of a sample of medium-sized 3PLs operating in Italy and the UK, in terms of environmental organizational culture, initiatives, and influencing factors. Our analysis shows that, notwithstanding environmental sustainability is generally recognised as a strategic priority, a certain degree of diversity in the deployment of environmental strategies still exists. This paper is original since the extant literature on green strategies of 3PLs provides findings predominantly from a single country perspective and mainly investigates large/multinational organizations. It also provides indications to help managers of medium-sized 3PLs in positioning their business. This is particularly meaningful in the 3PL industry, where medium-sized organizations significantly contribute to the generated turnover and market value. Copyright © 2017 Elsevier Ltd. All rights reserved.

Carnauba wax as a promising excipient in melt granulation targeting the preparation of mini-tablets for sustained release of highly soluble drugs.

Science.gov (United States)

Nart, Viviane; Beringhs, André O'Reilly; França, Maria Terezinha; de Espíndola, Brenda; Pezzini, Bianca Ramos; Stulzer, Hellen Karine

2017-01-01

Mini-tablets are a new tendency in solid dosage form design for overcoming therapeutic obstacles such as impaired swallowing and polypharmacy therapy. Among their advantages, these systems offer therapeutic benefits such as dose flexibility and combined drug release patterns. The use of lipids in the formulation has also drawn considerable interest as means to modify the drug release from the dosage form. Therefore, this paper aimed at developing sustained release mini-tablets containing the highly soluble drugs captopril and metformin hydrochloride. Carnauba wax was used as a lipid component in melt granulation, targeting the improvement of the drugs poor flowability and tabletability, as well as to sustain the drug release profiles in association with other excipients. To assist sustaining the drug release, Ethocel™ (EC) and Kollicoat® SR 30D associated with Opadry® II were employed as matrix-forming and reservoir-forming materials, respectively. The neat drugs, granules and the bulk formulations were evaluated for their angle of repose, compressibility index, Hausner ratio and tabletability. Mini-tablets were evaluated for their weight variation, hardness, friability, drug content and in-vitro drug release. The results indicated that melt granulation with carnauba wax improved the flow and the tabletability of the drugs, allowing the preparation of mini-tablets with adequate tensile strength under reduced compaction pressures. All mini-tablet formulations showed acceptable hardness (within the range of 1.16 to 3.93Kp) and friability (carnauba wax proved to be a promising excipient in melt granulation targeting the preparation of mini-tablets for sustained release of soluble drugs. Copyright © 2016 Elsevier B.V. All rights reserved.

Development of sustained and dual drug release co-extrusion formulations for individual dosing.

Science.gov (United States)

Laukamp, Eva Julia; Vynckier, An-Katrien; Voorspoels, Jody; Thommes, Markus; Breitkreutz, Joerg

2015-01-01

In personalized medicine and patient-centered medical treatment individual dosing of medicines is crucial. The Solid Dosage Pen (SDP) allows for an individual dosing of solid drug carriers by cutting them into tablet-like slices. The aim of the present study was the development of sustained release and dual release formulations with carbamazepine (CBZ) via hot-melt co-extrusion for the use in the SDP. The selection of appropriate coat- and core-formulations was performed by adapting the mechanical properties (like tensile strength and E-modulus) for example. By using different excipients (polyethyleneglycols, poloxamers, white wax, stearic acid, and carnauba wax) and drug loadings (30-50%) tailored dissolution kinetics was achieved showing cube root or zero order release mechanisms. Besides a biphasic drug release, the dose-dependent dissolution characteristics of sustained release formulations were minimized by a co-extruded wax-coated formulation. The dissolution profiles of the co-extrudates were confirmed during short term stability study (six months at 21.0 ± 0.2 °C, 45%r.h.). Due to a good layer adhesion of core and coat and adequate mechanical properties (maximum cutting force of 35.8 ± 2.0 N and 26.4 ± 2.8 N and E-modulus of 118.1 ± 8.4 and 33.9 ± 4.5 MPa for the dual drug release and the wax-coated co-extrudates, respectively) cutting off doses via the SDP was precise. While differences of the process parameters (like the barrel temperature) between the core- and the coat-layer resulted in unsatisfying content uniformities for the wax-coated co-extrudates, the content uniformity of the dual drug release co-extrudates was found to be in compliance with pharmacopoeial specification. Copyright © 2015 Elsevier B.V. All rights reserved.

Nanomedicine for glaucoma: liposomes provide sustained release of latanoprost in the eye

Directory of Open Access Journals (Sweden)

Natarajan JV

2012-01-01

Full Text Available Jayaganesh V Natarajan1*, Marcus Ang2*, Anastasia Darwitan1, Sujay Chattopadhyay3, Tina T Wong2, Subbu S Venkatraman1 1Materials Science and Engineering, Nanyang Technological University, Singapore; 2Singapore Eye Research Institute, Singapore; 3Polymer Division, Indian Institute of Technology Roorkee, India*These authors contributed equally to this workPurpose: To report the development and therapeutic evaluation of a liposomal nanocarrier for sustained release of latanoprost, in the rabbit eye.Methods: We fabricated latanoprost-loaded egg-phosphatidylcholine (EggPC liposomes using the film hydration technique. The delivery vehicles were nano-sized (Z avg = 109 ± 18 nm, had a narrow poly dispersity index (PDI = 0.19 ± 0.04, and a very high loading efficiency (94% ± 5%. Based on in vitro data, we evaluated this formulation for lowering intraocular pressure (IOP in rabbit eyes. Following a single subconjunctival injection of the latanoprost loaded formulation, the eyes were clinically monitored and the IOP recorded.Results: Latanoprost-loaded EggPC liposomes demonstrated a high drug/lipid mole ratio of 0.181, remained stable for at least 6 months on storage (4°C, and at least 1 month at 25°C. A slow and sustained release of 60% of latanoprost was achieved by 14 days in the in vitro release study. The same formulation demonstrated a greater sustained IOP lowering effect compared with daily administration of topical latanoprost beyond 90 days (4.8 ± 1.5 vs 2.5 ± 0.9 mmHg; P < 0.001. No signs of inflammation were evident in the eyes from slit-lamp examination analysis.Conclusion: The loading required for a long-term sustained delivery of latanoprost for up to 90 days in the rabbit eyes was achieved with EggPC liposomes. A single injection of latanoprost-loaded EggPC liposomes can lower the IOP for up to 90 days, with a greater IOP lowering effect than daily topical administration of latanoprost.Keywords: nanomedicine, nanoliposomes, Egg

Towards the Use of Unmanned Aerial Systems for Providing Sustainable Services in Smart Cities.

Science.gov (United States)

Moguel, Enrique; Conejero, José M; Sánchez-Figueroa, Fernando; Hernández, Juan; Preciado, Juan C; Rodríguez-Echeverría, Roberto

2017-12-27

Sustainability is at the heart of many application fields where the use of Unmanned Aerial Systems (UAS) is becoming more and more important (e.g., agriculture, fire detection and prediction, environmental surveillance, mapping, etc.). However, their usage and evolution are highly conditioned by the specific application field they are designed for, and thus, they cannot be easily reused among different application fields. From this point of view, being that they are not multipurpose, we can say that they are not fully sustainable. Bearing this in mind, the objective of this paper is two-fold: on the one hand, to identify the whole set of features that must be provided by a UAS to be considered sustainable and to show that there is no UAS satisfying all these features; on the other hand, to present an open and sustainable UAS architecture that may be used to build UAS on demand to provide the features needed in each application field. Since this architecture is mainly based on software and hardware adaptability, it contributes to the technical sustainability of cities.

Towards the Use of Unmanned Aerial Systems for Providing Sustainable Services in Smart Cities

Directory of Open Access Journals (Sweden)

Enrique Moguel

2017-12-01

Full Text Available Sustainability is at the heart of many application fields where the use of Unmanned Aerial Systems (UAS is becoming more and more important (e.g., agriculture, fire detection and prediction, environmental surveillance, mapping, etc.. However, their usage and evolution are highly conditioned by the specific application field they are designed for, and thus, they cannot be easily reused among different application fields. From this point of view, being that they are not multipurpose, we can say that they are not fully sustainable. Bearing this in mind, the objective of this paper is two-fold: on the one hand, to identify the whole set of features that must be provided by a UAS to be considered sustainable and to show that there is no UAS satisfying all these features; on the other hand, to present an open and sustainable UAS architecture that may be used to build UAS on demand to provide the features needed in each application field. Since this architecture is mainly based on software and hardware adaptability, it contributes to the technical sustainability of cities.

Dutch Logistics Service Providers and Sustainable Physical Distribution: Searching for Focus

NARCIS (Netherlands)

Pieters, R.; Glöckner, H.H.; Omta, S.W.F.; Weijers, S.

2012-01-01

As environmental concerns becoming increasingly important to logistics service providers, the question arises as to how they can achieve sustainable physical distribution practices while surviving the severe competition in freight transport. This issue is further complicated by the pressures from

Dutch Logistics Service Providers and Sustainable Physical Distribution: Searching for Focus

NARCIS (Netherlands)

Pieters, R.; Glöckner, H.H.; Omta, S.W.F.; Weijers, S.

2013-01-01

As environmental concerns becoming increasingly important to logistics service providers, the question arises as to how they can achieve sustainable physical distribution practices while surviving the severe competition in freight transport. This issue is further complicated by the pressures from

Adverse-drug-event data provided by pharmaceutical companies.

Science.gov (United States)

Cudny, Magdalena E; Graham, Angie S

2008-06-01

Pharmaceutical company drug information center (PCDIC) responses to queries about adverse drug events (ADEs) were studied to determine whether PCDICs search sources other than the prescribing information on the package insert (PI) and whether the PCDICs' approach differs according to whether an ADE is listed in the PI (labeled) or not (unlabeled). Companies were selected from a list of PCDICs in the Physicians' Desk Reference. One oral or injectable prescription drug from each company was selected. For each drug, a labeled ADE and an unlabeled ADE about which to query the PCDICs were randomly selected from the index of an annual publication on ADEs. The investigators telephoned the PCDICs with an open-ended inquiry about the incidence, timing, and management of the ADE as reported in the literature and the company's internal data; they clarified that the request did not concern a specific patient. Whether or not information was provided, the source searched was recorded (PI, literature, internal database), and the percentages of PCDICs that used each source for labeled and for unlabeled ADEs were analyzed. Results were obtained from 100 companies to questions about 100 drugs (200 ADEs). For ADEs overall, 80% used the PI, 50% the medical literature, and 38% internal data. For labeled versus unlabeled ADEs, respectively, the PI was used by 84% and 76%; literature, both 50%; and internal data, 35% and 41%. The PCDIC specialists referencing the PI did not always provide accurate or up-to-date information. Some specialists, when asked to query internal databases, said that was not an option. For both labeled and unlabeled ADEs, the PI was the primary source used by PCDICs to answer safety questions about their products, and internal data were the least-used source. Most resources used by PCDICs are readily available to practicing pharmacists.

In situ gel systems as 'smart' carriers for sustained ocular drug delivery.

Science.gov (United States)

Agrawal, Ashish Kumar; Das, Manasmita; Jain, Sanyog

2012-04-01

In situ gel systems refer to a class of novel delivery vehicles, composed of natural, semisynthetic or synthetic polymers, which present the unique property of sol-gel conversion on receipt of biological stimulus. The present review summarizes the latest developments in in situ gel technology, with regard to ophthalmic drug delivery. Starting with the mechanism of ocular absorption, the review expands on the fabrication of various polymeric in situ gel systems, made up of two or more polymers presenting multi-stimuli sensitivity, coupled with other interesting features, such as bio-adhesion, enhanced penetration or sustained release. Various key issues and challenges in this area have been addressed and critically analyzed. The advent of in situ gel systems has inaugurated a new transom for 'smart' ocular delivery. By virtue of possessing stimuli-responsive phase transition properties, these systems can easily be administered into the eye, similar to normal eye drops. Their unique gelling properties endow them with special features, such as prolonged retention at the site of administration, followed by sustained drug release. Despite the superiority of these systems as compared with conventional ophthalmic formulations, further investigations are necessary to address the toxicity issues, so as to minimize regulatory hurdles during commercialization.

Dual-drug delivery by porous silicon nanoparticles for improved cellular uptake, sustained release, and combination therapy.

Science.gov (United States)

Wang, Chang-Fang; Mäkilä, Ermei M; Kaasalainen, Martti H; Hagström, Marja V; Salonen, Jarno J; Hirvonen, Jouni T; Santos, Hélder A

2015-04-01

Dual-drug delivery of antiangiogenic and chemotherapeutic drugs can enhance the therapeutic effect for cancer therapy. Conjugation of methotrexate (MTX) to porous silicon (PSi) nanoparticles (MTX-PSi) with positively charged surface can improve the cellular uptake of MTX and inhibit the proliferation of cancer cells. Herein, MTX-PSi conjugates sustained the release of MTX up to 96 h, and the released fragments including MTX were confirmed by mass spectrometry. The intracellular distribution of the MTX-PSi nanoparticles was confirmed by transmission electron microscopy. Compared to pure MTX, the MTX-PSi achieved similar inhibition of cell proliferation in folate receptor (FR) over-expressing U87 MG cancer cells, and a higher effect in low FR-expressing EA.hy926 cells. Nuclear fragmentation analysis demonstrated programmed cell apoptosis of MTX-PSi in the high/low FR-expressing cancer cells, whereas PSi alone at the same dose had a minor effect on cell apoptosis. Finally, the porous structure of MTX-PSi enabled a successful concomitant loading of another anti-angiogenic hydrophobic drug, sorafenib, and considerably enhanced the dissolution rate of sorafenib. Overall, the MTX-PSi nanoparticles can be used as a platform for combination chemotherapy by simultaneously enhancing the dissolution rate of a hydrophobic drug and sustaining the release of a conjugated chemotherapeutic drug. Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Hydrophobic ion pairing of a minocycline/Ca(2+)/AOT complex for preparation of drug-loaded PLGA nanoparticles with improved sustained release.

Science.gov (United States)

Holmkvist, Alexander Dontsios; Friberg, Annika; Nilsson, Ulf J; Schouenborg, Jens

2016-02-29

Polymeric nanoparticles is an established and efficient means to achieve controlled release of drugs. Incorporation of minocycline, an antibiotic with anti-inflammatory and neuroprotective properties, into biodegradable nanoparticles may therefore provide an efficient means to combat foreign body reactions to implanted electrodes in the brain. However, minocycline is commonly associated with poor encapsulation efficiencies and/or fast release rates due to its high solubility in water. Moreover, minocycline is unstable under conditions of low and high pH, heat and exposure to light, which exacerbate the challenges of encapsulation. In this work drug loaded PLGA nanoparticles were prepared by a modified emulsification-solvent-diffusion technique and characterized for size, drug encapsulation and in vitro drug release. A novel hydrophobic ion pair complex of minocycline, Ca(2+) ions and the anionic surfactant AOT was developed to protect minocycline from degradation and prolong its release. The optimized formulation resulted in particle sizes around 220 nm with an entrapment efficiency of 43% and showed drug release over 30 days in artificial cerebrospinal fluid. The present results constitute a substantial increase in release time compared to what has hitherto been achieved for minocycline and indicate that such particles might provide useful for sustained drug delivery in the CNS. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Multilayer encapsulated mesoporous silica nanospheres as an oral sustained drug delivery system for the poorly water-soluble drug felodipine

Energy Technology Data Exchange (ETDEWEB)

Hu, Liang [Department of Pharmaceutics, Shenyang Pharmaceutical University, P.O. Box 32, Liaoning Province, Shenyang 110016 (China); Sun, Hongrui [English Teaching Department, School of Basic Courses, Shenyang Pharmaceutical University, Wenhua Road 103, Shenyang 110016 (China); Zhao, Qinfu; Han, Ning; Bai, Ling; Wang, Ying; Jiang, Tongying [Department of Pharmaceutics, Shenyang Pharmaceutical University, P.O. Box 32, Liaoning Province, Shenyang 110016 (China); Wang, Siling, E-mail: silingwang@syphu.edu.cn [Department of Pharmaceutics, Shenyang Pharmaceutical University, P.O. Box 32, Liaoning Province, Shenyang 110016 (China)

2015-02-01

We used a combination of mesoporous silica nanospheres (MSN) and layer-by-layer (LBL) self-assembly technology to establish a new oral sustained drug delivery system for the poorly water-soluble drug felodipine. Firstly, the model drug was loaded into MSN, and then the loaded MSN were repeatedly encapsulated by chitosan (CHI) and acacia (ACA) via LBL self-assembly method. The structural features of the samples were studied using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and nitrogen adsorption. The encapsulating process was monitored by zeta-potential and surface tension measurements. The physical state of the drug in the samples was characterized by differential scanning calorimetry (DSC) and X-ray diffractometry (XRD). The influence of the multilayer with different number of layers on the drug release rate was studied using thermal gravimetric analysis (TGA) and surface tension measurement. The swelling effect and the structure changes of the multilayer were investigated to explore the relationship between the drug release behavior and the state of the multilayer under different pH conditions. The stability and mucosa adhesive ability of the prepared nanoparticles were also explored. After multilayer coating, the drug release rate was effectively controlled. The differences in drug release behavior under different pH conditions could be attributed to the different states of the multilayer. And the nanoparticles possessed good stability and strong mucosa adhesive ability. We believe that this combination offers a simple strategy for regulating the release rate of poorly water-soluble drugs and extends the pharmaceutical applications of inorganic materials and polymers. - Highlights: • A combination of inorganic and organic materials was applied. • Mesoporous silica nanospheres (MSN) were used as drug carriers. • Chitosan and acacia were encapsulated through layer-by-layer self-assembly. • The release rate of the poorly

Multilayer encapsulated mesoporous silica nanospheres as an oral sustained drug delivery system for the poorly water-soluble drug felodipine

International Nuclear Information System (INIS)

Hu, Liang; Sun, Hongrui; Zhao, Qinfu; Han, Ning; Bai, Ling; Wang, Ying; Jiang, Tongying; Wang, Siling

2015-01-01

We used a combination of mesoporous silica nanospheres (MSN) and layer-by-layer (LBL) self-assembly technology to establish a new oral sustained drug delivery system for the poorly water-soluble drug felodipine. Firstly, the model drug was loaded into MSN, and then the loaded MSN were repeatedly encapsulated by chitosan (CHI) and acacia (ACA) via LBL self-assembly method. The structural features of the samples were studied using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and nitrogen adsorption. The encapsulating process was monitored by zeta-potential and surface tension measurements. The physical state of the drug in the samples was characterized by differential scanning calorimetry (DSC) and X-ray diffractometry (XRD). The influence of the multilayer with different number of layers on the drug release rate was studied using thermal gravimetric analysis (TGA) and surface tension measurement. The swelling effect and the structure changes of the multilayer were investigated to explore the relationship between the drug release behavior and the state of the multilayer under different pH conditions. The stability and mucosa adhesive ability of the prepared nanoparticles were also explored. After multilayer coating, the drug release rate was effectively controlled. The differences in drug release behavior under different pH conditions could be attributed to the different states of the multilayer. And the nanoparticles possessed good stability and strong mucosa adhesive ability. We believe that this combination offers a simple strategy for regulating the release rate of poorly water-soluble drugs and extends the pharmaceutical applications of inorganic materials and polymers. - Highlights: • A combination of inorganic and organic materials was applied. • Mesoporous silica nanospheres (MSN) were used as drug carriers. • Chitosan and acacia were encapsulated through layer-by-layer self-assembly. • The release rate of the poorly

Improvement of survival in C6 rat glioma model by a sustained drug release from localized PLGA microspheres in a thermoreversible hydrogel.

Science.gov (United States)

Ozeki, Tetsuya; Kaneko, Daiki; Hashizawa, Kosuke; Imai, Yoshihiro; Tagami, Tatsuaki; Okada, Hiroaki

2012-05-10

A local drug delivery system based on sustained drug release is an attractive approach to treat brain tumors. We have developed a novel device using drug-incorporated poly(lactic-co-glycolic acid) (PLGA) microspheres embedded in thermoreversible gelation polymer (TGP) formulation (drug/PLGA/TGP formulation). TGP forms a gel at body temperature but sol at room temperature. Therefore, when this formulation is injected into the brain tumor, the PLGA microspheres in TGP gel are localized at the injection site and do not diffuse throughout the brain tissue; eventually, sustained drug release from PLGA microspheres is achieved at the target site. In this study, two chemotherapeutic drugs (camptothecin (CPT) or vincristine (VCR)) were incorporated into PLGA microspheres to prepare drug/PLGA/TGP formulations. VCR/PLGA microspheres exhibited the higher encapsulation efficiency than CPT/PLGA microspheres (70.1% versus 30.1%). In addition, VCR/PLGA microspheres showed a higher sustained release profile than CPT/PLGA microspheres (54.5% versus 72.5% release, at 28 days). Therapeutic effect (mean survival) was evaluated in the C6 rat glioma model (control group, 18 days; CPT/PLGA/TGP treatment group, 24 days; VCR/PLGA/TGP treatment group, 33 days). In particular, the VCR/PLGA/TGP formulation produced long-term survivors (>60 days). Therefore, this formulation can be therapeutically effective formulation for the glioma therapy. Copyright © 2012 Elsevier B.V. All rights reserved.

Sustained-release progesterone vaginal suppositories 1--development of sustained-release granule--.

Science.gov (United States)

Nakayama, Ayako; Sunada, Hisakazu; Okamoto, Hirokazu; Furuhashi, Kaoru; Ohno, Yukiko; Ito, Mikio

2009-02-01

Progesterone (P) is an important hormone for the establishment of pregnancy, and its administration is useful for luteal insufficiency. Considering the problems of commercially available oral and injection drugs, hospital-formulated vaginal suppositories are clinically used. However, since the half-life of P suppositories is short, it is difficult to maintain its constant blood concentration. To sustain drug efficacy and prevent side-effects, we are attempting to develop sustained-release suppositories by examining the degree of sustained-release of active ingredients. In this study, we examined the combinations of granulation methods and release systems for the preparation of sustained-release granules of P, and produced 13 types of sustained-release granules. We also examined the diameter, content, and dissolution of each type of granules, and confirmed that the sustained-release of all types of granules was satisfactory. Among the sustained-release granules, we selected granules with a content and a degree of sustained-release suitable for sustained-release suppositories.

ICT-Platform to Transform Car Dealerships to Regional Providers of Sustainable Mobility Services

OpenAIRE

Benjamin Wagner vom Berg; Jorge Marx Gómez; Alexander Sandau

2017-01-01

Aim/Purpose: The topic of this study is the ICT-enabled transformation of car dealerships to regional providers of sustainable mobility (e.g., car sharing). Background: Car dealerships offer specific conditions that enable a sustainable mobility offer, based on individual motorized transport like car sharing. This is especially useful in small towns or rural areas where people’s mobility is strongly dominated by private cars, and public transport coverage is limited. However, these new m...

Can engineering solutions really provide a sustainable future?

DEFF Research Database (Denmark)

Boisen, Anja

2014-01-01

Sustainability is a word which is very often (mis)used in various public debates. In engineering, however, it is perhaps easier to define the term, then in other academic fields. We advocate the principle that only those activities, which can be sustained for at least a few centuries using known...

A multi-objective location-inventory model for 3PL providers with sustainable considerations under uncertainty

Directory of Open Access Journals (Sweden)

R. Daghigh

2016-09-01

Full Text Available In recent years, logistics development is considered as an important aspect of any country’s development. Outsourcing logistics activities to third party logistics (3PL providers is a common way to achieve logistics development. On the other hand, globalization and increasing customers’ concern about the environmental impact of activities as well as the appearance of the issue of social responsibility have led companies employ sustainable supply chain management, which considers economic, environmental and social benefits, simultaneously. This paper proposes a multi-objective model to design logistics network for 3PL providers by considering sustainable objectives under uncertainty. Objective functions include minimizing the total cost, minimizing greenhouse gas emission and maximizing social responsibility subject to fair access to products, number of created job opportunities and local community development. It is worth mentioning that in the present paper the perishability of products is also considered. A numerical example is provided to solve and validate model using augmented Epsilon-Constraint method. The results show that three sustainable objectives were in conflict and as the one receives more desirable values, the others fall into more undesirable values. In addition, by increasing maximum perishable time periods and by considering lateral transshipment among facilities of a level one can improve sustainability indices of the problem, which indicates the necessity of such policy in improving network sustainability.

Why Do People Consume and Provide Sharing Economy Accommodation?—A Sustainability Perspective

Directory of Open Access Journals (Sweden)

Eunsuk Sung

2018-06-01

Full Text Available In the platform-based sharing economy service, the consumer using the service and the service provider providing the service form a two-sided market around the platform. In the two-sided market, service users and service providers interact across the platform, and the value of the platform increases with the size of the network. This study aims to study the virtuous circulation of consumption and production for sustainability of sharing economy. For this purpose, several hypotheses were established based on the literature and are tested with survey data of both consumer and service provider of Airbnb. Structural equation modeling is used to analyze whether the consumer acceptance intention model and the supplier acceptance intention model can be linked through the concept of network effect, which is a major characteristic of the sharing economy service platform. The research results are expected to contribute to development of a sustainable sharing economy model.

Innovator Organizations in New Drug Development: Assessing the Sustainability of the Biopharmaceutical Industry.

Science.gov (United States)

Kinch, Michael S; Moore, Ryan

2016-06-23

The way new medicines are discovered and brought to market has fundamentally changed over the last 30 years. Our previous analysis showed that biotechnology companies had contributed significantly to the US Food and Drug Administration approval of new molecular entities up to the mid-1980s, when the trends started to decline. Although intriguing, the focus on biotechnology necessarily precluded the wider question of how the biopharmaceutical industry has been delivering on its goals to develop new drugs. Here, we present a comprehensive analysis of all biopharmaceutical innovators and uncover unexpected findings. The present biopharmaceutical industry grew steadily from 1800 to 1950 and then stagnated for two decades, before a burst of growth attributable to the biotechnology revolution took place; but consolidation has reduced the number of active and independent innovators to a level not experienced since 1945. The trajectories and trends we observe raise fundamental questions about biopharmaceutical innovators and the sustainability of the drug-development enterprise. Copyright © 2016 Elsevier Ltd. All rights reserved.

Effect of propranolol in head tremor: quantitative study following single-dose and sustained drug administration.

Science.gov (United States)

Calzetti, S; Sasso, E; Negrotti, A; Baratti, M; Fava, R

1992-12-01

The effect of the beta-adrenoceptor antagonist propranolol has been investigated in nine patients suffering from isolated (six patients) or prominent (three patients) essential tremor of the head. In a double-blind, placebo-controlled study the tremorolytic efficacy of propranolol has been assessed by a quantitative accelerometric method after a single oral dose (120 mg) and following 2 weeks of sustained treatment with two different dosage regimens of the drug (120 and 240 mg daily). As compared with placebo, a significant reduction in tremor magnitude was found following a single oral dose but not on sustained administration of the beta-blocker at either dosage. The results suggest that the efficacy of sustained propranolol on isolated or prominent essential head tremor is less predictable and satisfactory than expected on the basis of the single-dose response, as compared with hand tremor.

Approaches for Sustaining and Building Management and Leadership Capability in VET Providers

Science.gov (United States)

Callan, Victor; Mitchell, John; Clayton, Berwyn; Smith, Larry

2007-01-01

This study examines the existing and potential strategies for sustaining and building greater levels of management and leadership capability in training organisations. The research report is one of the products of a nationally based research consortium: Supporting vocational education and training (VET) providers in building capability for the…

Hyper-Realistic, Team-Centered Fleet Surgical Team Training Provides Sustained Improvements in Performance.

Science.gov (United States)

Hoang, Tuan N; Kang, Jeff; Siriratsivawong, Kris; LaPorta, Anthony; Heck, Amber; Ferraro, Jessica; Robinson, Douglas; Walsh, Jonathan

2016-01-01

The high-stress, fast-paced environment of combat casualty care relies on effective teamwork and communication which translates into quality patient care. A training course was developed for U.S. Navy Fleet Surgical Teams to address these aspects of patient care by emphasizing efficiency and appropriate patient care. An effective training course provides knowledge and skills to pass the course evaluation and sustain the knowledge and skills acquired over time. The course included classroom didactic hours, and hands-on simulation sessions. A pretest was administered before the course, a posttest upon completion, and a sustainment test 5 months following course completion. The evaluation process measured changes in patient time to disposition and critical errors made during patient care. Naval Base San Diego, with resuscitation and surgical simulations carried out within the shipboard medical spaces. United States Navy medical personnel including physicians of various specialties, corpsmen, nurses, and nurse anesthetists deploying aboard ships. Time to disposition improved significantly, 11 ± 3 minutes, from pretest to posttest, and critical errors improved by 4 ± 1 errors per encounter. From posttest to sustainment test, time to disposition increased by 3 ± 1, and critical errors decreased by 1 ± 1. This course showed value in improving teamwork and communication skills of participants, immediately upon completion of the course, and after 5 months had passed. Therefore, with ongoing sustainment activities within 6 months, this course can substantially improve trauma care provided by shipboard deployed Navy medical personnel to wounded service members. Published by Elsevier Inc.

Sustained release of intravitreal flurbiprofen from a novel drug-in-liposome-in-hydrogel formulation.

Science.gov (United States)

Pachis, K; Blazaki, S; Tzatzarakis, M; Klepetsanis, P; Naoumidi, E; Tsilimbaris, M; Antimisiaris, S G

2017-11-15

A novel Flurbiprofen (FLB)-in-liposome-in-hydrogel formulation was developed, as a method to sustain the release and increase the ocular bioavailability of FLB following intravitreal injection. For this, FLB loading into liposomes was optimized and liposomes were entrapped in thermosensitive hydrogels consisted of Pluronic F-127 (P). FLB solution, liposomes, and FLB dissolved in hydrogel were also used as control formulations. Actively loaded liposomes were found to be optimal for high FLB loading and small size, while in vitro studies revealed that P concentration of 18% (w/v) was best to retain the integrity of the hydrogel-dispersed liposome, compared to a 20% concentration. The in vitro release of FLB was significantly sustained when FLB-liposomes were dispersed in the hydrogel compared to hydrogel dissolved FLB, as well as the other control formulations. In vivo studies were carried out in pigmented rabbits which were injected through a 27G needle with 1mg/mL FLB in the different formulation-types. Ophthalmic examinations after intravitreal injection of all FLB formulations, revealed no evidence of inflammation, hemorrhage, uveitis or endophthalmitis. Pharmacokinetic analysis results confirm that the hybrid drug delivery system increases the bioavailability (by 1.9 times compared to solution), and extends the presence of the drug in the vitreous cavity, while liposome and hydrogel formulations demonstrate intermediate performance. Furthermore the hybrid system increases MRT of FLB in aqueous humor and retina/choroid tissues, compared to all the control formulations. Currently the potential therapeutic advances of FLB sustained release formulations for IVT administration are being evaluated. Copyright © 2017 Elsevier B.V. All rights reserved.

Denial of pain medication by health care providers predicts in-hospital illicit drug use among individuals who use illicit drugs.

Science.gov (United States)

Ti, Lianping; Voon, Pauline; Dobrer, Sabina; Montaner, Julio; Wood, Evan; Kerr, Thomas

2015-01-01

Undertreated pain is common among people who use illicit drugs (PWUD), and can often reflect the reluctance of health care providers to provide pain medication to individuals with substance use disorders. To investigate the relationship between having ever been denied pain medication by a health care provider and having ever reported using illicit drugs in hospital. Data were derived from participants enrolled in two Canadian prospective cohort studies between December 2012 and May 2013. Using bivariable and multivariable logistic regression analyses, the relationship between having ever been denied pain medication by a health care provider and having ever reported using illicit drugs in hospital was examined. Among 1053 PWUD who had experienced ≥ 1 hospitalization, 452 (44%) reported having ever used illicit drugs while in hospital and 491(48%) reported having ever been denied pain medication. In a multivariable model adjusted for confounders, having been denied pain medication was positively associated with having used illicit drugs in hospital (adjusted OR 1.46 [95% CI 1.14 to 1.88]). The results of the present study suggest that the denial of pain medication is associated with the use of illicit drugs while hospitalized. These findings raise questions about how to appropriately manage addiction and pain among PWUD and indicate the potential role that harm reduction programs may play in hospital settings.

Local self-government potential in sustainable development of region providing

Directory of Open Access Journals (Sweden)

O. Y. Bobrovska

2016-06-01

Full Text Available Ongoing decentralization of power in Ukraine enhances abilities of each region to independently choose their development path and use their own resources. It requires reviewing and updating of mechanisms and instruments of local government and public administration projected to increase the sustainability of development. This necessitates further research of issues of this extremely complex phenomenon. The problem of sustainable development of the regions and their internal capacities over the past decades has attracted the attention of many Ukrainian scientists. They considered the question of the essence and characteristics of this phenomenon, categorical apparatus, and formed approaches to the assessment of the state etc. Existing scientific researchers provided an opportunity for better understanding and deepening of the issues of processes of development formation, becoming the basis for further research. The purpose of the article is the definition of the potential of local governments in the sustainable development of the region, finding approaches for improving management and rational use of resources to enhance the regional development. Development of regions is the scope of display of results and public nature of local self-government. However, the results which are achieved by regional development and its level of sustainability do not meet the needs of society. The results of ongoing reforms, their economic, environmental and social significance do not correspond to spent resources and efforts of society. Strategies of regions for the transition to sustainable development are not systematic. To search for answers and ways to address the issues of the article attempts to identify common root causes in the organization of local government, the underlying increase its impact in the direction of creating conditions and ensure the flow of sustainable regional development through research and their potential influential factors. It is

Dual-layer surface coating of PLGA-based nanoparticles provides slow-release drug delivery to achieve metronomic therapy in a paclitaxel-resistant murine ovarian cancer model.

Science.gov (United States)

Amoozgar, Zohreh; Wang, Lei; Brandstoetter, Tania; Wallis, Samuel S; Wilson, Erin M; Goldberg, Michael S

2014-11-10

Development of drug resistance is a central challenge to the treatment of ovarian cancer. Metronomic chemotherapy decreases the extent of drug-free periods, thereby hindering development of drug resistance. Intraperitoneal chemotherapy allows for treatment of tumors confined within the peritoneum, but achieving sustained tumor-localized chemotherapy remains difficult. We hypothesized that modulating the surface properties of poly(lactic-co-glycolic acid) (PLGA)-based nanoparticles could enhance their drug retention ability and extend their release profile, thereby enabling metronomic, localized chemotherapy in vivo. Paclitaxel was encapsulated in particles coated with a layer of polydopamine and a subsequent layer of poly(ethylene glycol) (PEG). These particles achieved a 3.8-fold higher loading content compared to that of nanoparticles formulated from linear PLGA-PEG copolymers. In vitro release kinetic studies and in vivo drug distribution profiles demonstrate sustained release of paclitaxel. Although free drug conferred no survival advantage, low-dose intraperitoneal administration of paclitaxel-laden surface-coated nanoparticles to drug-resistant ovarian tumor-bearing mice resulted in significant survival benefits in the absence of any apparent systemic toxicity.

Sustainable rare diseases business and drug access: no time for misconceptions.

Science.gov (United States)

Rollet, Pierrick; Lemoine, Adrien; Dunoyer, Marc

2013-07-23

Legislative incentives enacted in Europe through the Regulation (EC) No. 141/2000 to incentivize orphan drug development have over the last 12 years constituted a powerful impetus toward R&D directed at the rare diseases population. However, despite therapeutic promises contained in these projects and significant economic impact linked to burgeoning R&D expenditures, the affordability and value of OMPs has become a topic of health policy debate in Europe fueled by the perception that OMPs have high acquisition costs, and by misconceptions around pricing dynamics and rare-diseases business models. In order to maintain sustainable patient access to new and innovative therapies, it is essential to address these misconceptions, and to ensure the successful continuation of a dynamic OMPs R&D within rare-diseases public health policy. Misconceptions abound regarding the pricing of rare diseases drugs and reflect a poor appreciation of the R&D model and the affordability and value of OMPs. Simulation of potential financial returns of small medium sized rare diseases companies focusing on high priced drugs show that their economic returns are likely to be close to their cost of capital. Research in rare diseases is a challenging endeavour characterised by high fixed costs in which companies accrue substantial costs for several years before potentially generating returns from the fruits of their investments. Although heavily dependent upon R&D capabilities of each individual company or R&D organization, continuous flow of R&D financial investment should allow industry to increasingly include efficiencies in research and development in cost considerations to its customers. Industry should also pro-actively work on facilitating development of a specific value based pricing approach to help understanding what constitute value in rare diseases. Policy makers must reward innovation based upon unmet need and patient outcome. Broader understanding by clinicians, the public, and

Real-time Monitoring of Sustained Drug Release using the Optical Properties of Porous Silicon Photonic Crystal Particles

Science.gov (United States)

Wu, E.C.; Andrew, J.S.; Cheng, L; Freeman, W.R.; Pearson, L; Sailor, M.J.

2011-01-01

A controlled and observable drug delivery system that enables long-term local drug administration is reported. Biodegradable and biocompatible drug-loaded porous Si microparticles were prepared from silicon wafers, resulting in a porous 1-dimensional photonic crystal (rugate filter) approx. 12 micrometers thick and 35 micrometers across. An organic linker, 1-undecylenic acid, was attached to the Si-H terminated inner surface of the particles by hydrosilylation and the anthracycline drug daunorubicin was bound to the carboxy terminus of the linker. Degradation of the porous Si matrix in vitro was found to release the drug in a linear and sustained fashion for 30 d. The bioactivity of the released daunorubicin was verified on retinal pigment epithelial (RPE) cells. The degradation/drug delivery process was monitored in situ by digital imaging or spectroscopic measurement of the photonic resonance reflected from the nanostructured particles, and a simple linear correlation between observed wavelength and drug release was observed. Changes in the optical reflectance spectrum were sufficiently large to be visible as a distinctive red to green color change. PMID:21122914

Organic Nano vesicular Cargoes for Sustained Drug Delivery: Synthesis, Vesicle Formation, Controlling “Pearling” States, and Terfenadine Loading/Release Studies

International Nuclear Information System (INIS)

Botcha, A.K.; Chandrasekar, R.; Dulla, B.; Reddy, E.R.; Rajadurai, M.S.; Chennubhotla, K.S.; Kulkarni, P.; Kulkarni, P.

2014-01-01

“Sustained drug delivery systems” which are designed to accomplish long-lasting therapeutic effect are one of the challenging topics in the area of nano medicine. We developed an innovative strategy to prepare nontoxic and polymer stabilized organic nano vesicles (diameter: 200 nm) from a novel bolaamphiphile, where two hydrogen bonding acetyl cytosine molecules connected to 4,4′′-positions of the 2,6-bispyrazolylpyridine through two flexible octyne chains. The nano vesicles behave like biological membrane by spontaneously self-assembling into “pearl-like” chains and subsequently forming long nano tubes (diameter: 150 nm), which further develop into various types of network-junctions through self-organization. For drug loading and delivery applications, the nano vesicles were externally protected with biocompatible poly(ethyleneglycol)-2000 to prevent them from fusion and ensuing tube formation. Nontoxic nature of the nano vesicles was demonstrated by zebra fish teratogenicity assay. Biocompatible nano vesicles were loaded with “terfenadine” drug and successfully utilized to transport and release drug in sustained manner (up to 72 h) in zebra fish larvae, which is recognized as an emerging in vivo model system Synthetic nano

Cyclodextrin-Modified Porous Silicon Nanoparticles for Efficient Sustained Drug Delivery and Proliferation Inhibition of Breast Cancer Cells.

Science.gov (United States)

Correia, Alexandra; Shahbazi, Mohammad-Ali; Mäkilä, Ermei; Almeida, Sérgio; Salonen, Jarno; Hirvonen, Jouni; Santos, Hélder A

2015-10-21

Over the past decade, the potential of polymeric structures has been investigated to overcome many limitations related to nanosized drug carriers by modulating their toxicity, cellular interactions, stability, and drug-release kinetics. In this study, we have developed a successful nanocomposite consisting of undecylenic acid modified thermally hydrocarbonized porous silicon nanoparticles (UnTHCPSi NPs) loaded with an anticancer drug, sorafenib, and surface-conjugated with heptakis(6-amino-6-deoxy)-β-cyclodextrin (HABCD) to show the impact of the surface polymeric functionalization on the physical and biological properties of the drug-loaded nanoparticles. Cytocompatibility studies showed that the UnTHCPSi-HABCD NPs were not toxic to breast cancer cells. HABCD also enhanced the suspensibility and both the colloidal and plasma stabilities of the UnTHCPSi NPs. UnTHCPSi-HABCD NPs showed a significantly increased interaction with breast cancer cells compared to bare NPs and also sustained the drug release. Furthermore, the sorafenib-loaded UnTHCPSi-HABCD NPs efficiently inhibited cell proliferation of the breast cancer cells.

Synthetic sustained gene delivery systems.

Science.gov (United States)

Agarwal, Ankit; Mallapragada, Surya K

2008-01-01

Gene therapy today is hampered by the need of a safe and efficient gene delivery system that can provide a sustained therapeutic effect without cytotoxicity or unwanted immune responses. Bolus gene delivery in solution results in the loss of delivered factors via lymphatic system and may cause undesired effects by the escape of bioactive molecules to distant sites. Controlled gene delivery systems, acting as localized depot of genes, provide an extended sustained release of genes, giving prolonged maintenance of the therapeutic level of encoded proteins. They also limit the DNA degradation in the nuclease rich extra-cellular environment. While attempts have been made to adapt existing controlled drug delivery technologies, more novel approaches are being investigated for controlled gene delivery. DNA encapsulated in nano/micro spheres of polymers have been administered systemically/orally to be taken up by the targeted tissues and provide sustained release once internalized. Alternatively, DNA entrapped in hydrogels or scaffolds have been injected/implanted in tissues/cavities as platforms for gene delivery. The present review examines these different modalities for sustained delivery of viral and non-viral gene-delivery vectors. Design parameters and release mechanisms of different systems made with synthetic or natural polymers are presented along with their prospective applications and opportunities for continuous development.

Fabrication and characterization of a rapid prototyped tissue engineering scaffold with embedded multicomponent matrix for controlled drug release

DEFF Research Database (Denmark)

Chen, Muwan; Le, Dang Q S; Hein, San

2012-01-01

Bone tissue engineering implants with sustained local drug delivery provide an opportunity for better postoperative care for bone tumor patients because these implants offer sustained drug release at the tumor site and reduce systemic side effects. A rapid prototyped macroporous polycaprolactone......, this scaffold can fulfill the requirements for both bone tissue engineering and local sustained release of an anticancer drug in vitro. These results suggest that the scaffold can be used clinically in reconstructive surgery after bone tumor resection. Moreover, by changing the composition and amount...... of individual components, the scaffold can find application in other tissue engineering areas that need local sustained release of drug....

An integrated Biophysical CGE model to provide Sustainable Development Goal insights

Science.gov (United States)

Sanchez, Marko; Cicowiez, Martin; Howells, Mark; Zepeda, Eduardo

2016-04-01

Future projected changes in the energy system will inevitably result in changes to the level of appropriation of environmental resources, particularly land and water, and this will have wider implications for environmental sustainability, and may affect other sectors of the economy. An integrated climate, land, energy and water (CLEW) system will provide useful insights, particularly with regard to the environmental sustainability. However, it will require adequate integration with other tools to detect economic impacts and broaden the scope for policy analysis. A computable general equilibrium (CGE) model is a well suited tool to channel impacts, as detected in a CLEW analysis, onto all sectors of the economy, and evaluate trade-offs and synergies, including those of possible policy responses. This paper will show an application of such integration in a single-country CGE model with the following key characteristics. Climate is partly exogenous (as proxied by temperature and rainfall) and partly endogenous (as proxied by emissions generated by different sectors) and has an impact on endogenous variables such as land productivity and labor productivity. Land is a factor of production used in agricultural and forestry activities which can be of various types if land use alternatives (e.g., deforestation) are to be considered. Energy is an input to the production process of all economic sectors and a consumption good for households. Because it is possible to allow for substitution among different energy sources (e.g. renewable vs non-renewable) in the generation of electricity, the production process of energy products can consider the use of natural resources such as oil and water. Water, data permitting, can be considered as an input into the production process of agricultural sectors, which is particularly relevant in case of irrigation. It can also be considered as a determinant of total factor productivity in hydro-power generation. The integration of a CLEW

Causes and Consequences of Choosing Different Assurance Providers: An International Study of Sustainability Reporting

NARCIS (Netherlands)

P.M. Perego (Paolo)

2009-01-01

textabstractAn increasing number of companies voluntary disclose information about their social and environment performance in sustainability reports. This study investigates the causes and consequences of choosing different assurance providers for companies seeking independent verification of their

Opinion On Drug Information Services Provided In A Multi- Specialty Teaching Hospital

Directory of Open Access Journals (Sweden)

Vijayakumar TM, Poovi G & Dhanaraju MD

2011-05-01

Full Text Available Objective: To evaluate the various drug information queriesreceived, and to access the drug information services providedby the pharmacy practice department.Method: Drug information queries received during wardrounds, direct communication, telephone or internet etc. weredocumented in the drug information request anddocumentation forms prepared by the department over theperiod of January 2010 to June 2010. Various parameters likestatus of enquirer, their specialty, mode of receipt of query,purpose of query, type of query etc. were consider forevaluation.Results: Out of 208 queries received, major 56 (26.9% frommale medical ward. Maximum [82 (39.4 %] queries were fromthe physicians. 73 (35.0 % of the queries were about therecent advances and the updating of the information, It wasfound that mostly the mode of request was during wardrounds 85 (40.9%. Most of the queries [126 (60.6%] wereanswered by written or printout format. Majority of thequeries [195 (93.8 %] were answered directly to theenquirers through direct access. Most of the queries wereanswered through books in the department [86 (41.3 %].Conclusion: Results of the external auditing revealed thatrequestors were generally satisfied with the service provided.The drug information services provided by clinical pharmacistsat the hospital were found to be useful and beneficial to thehealthcare professionals and patients.

Does the creative economy provide a sustainable urban form?: Some European experiences

Directory of Open Access Journals (Sweden)

Bajić-Brković Milica

2009-01-01

Full Text Available Three urban redevelopment projects recently undertaken in Europe-Ria 2000 in Bilbao, Spain; Emscher Park in Germany; and Gasometer in Vienna, Austria, are presented and discussed in the paper. All three innovate on three independent levels culture, economy and urban organization, and provide high quality places to assist their cities and regions to cope with a global competitive environment. All three were also designed to represent the best of the sustainable practice in Europe at the time. In the same time, the basic philosophy of all three is deeply rooted in creative economies and elaborate their basis principles. The paper explores their design solution in order to identify the points where creative industries and sustainability meet, and investigates if, and to what extent, they comply with the principles of sustainability. Urban design and physical space are in focus, while other areas are considered as long as they contribute to the design, or reflect a credo that architecture and urban design are among those that play a central role in building cities' reputation and character. The author argues that all three materialized some of the basic principles of sustainability, by elaborating ideas of genius loci and the relationship between identity and locality. Emscher Park has been the most successful in demonstrating how the Brownfield site and devastated area could be transformed into the cultural landscape. Ria 2000 brought in a new interpretation of balance between the man made and natural environments. Gasometer has been least successful, and rather its solutions go after the traditional redevelopment paradigm.

Sustained release of antibiotics from injectable and thermally responsive polypeptide depots.

Science.gov (United States)

Adams, Samuel B; Shamji, Mohammed F; Nettles, Dana L; Hwang, Priscilla; Setton, Lori A

2009-07-01

Biodegradable polymeric scaffolds are of interest for delivering antibiotics to local sites of infection in orthopaedic applications, such as bone and diarthrodial joints. The objective of this study was to develop a biodegradable scaffold with ease of drug loading in aqueous solution, while providing for drug depot delivery via syringe injection. Elastin-like polypeptides (ELPs) were used for this application, biopolymers of repeating pentapeptide sequences that were thermally triggered to undergo in situ depot formation at body temperature. ELPs were modified to enable loading with the antibiotics, cefazolin, and vancomycin, followed by induction of the phase transition in vitro. Cefazolin and vancomycin concentrations were monitored, as well as bioactivity of the released antibiotics, to test an ability of the ELP depot to provide for prolonged release of bioactive drugs. Further tests of formulation viscosity were conducted to test suitability as an injectable drug carrier. Results demonstrate sustained release of therapeutic concentrations of bioactive antibiotics by the ELP, with first-order time constants for drug release of approximately 25 h for cefazolin and approximately 500 h for vancomycin. These findings illustrate that an injectable, in situ forming ELP depot can provide for sustained release of antibiotics with an effect that varies across antibiotic formulation. ELPs have important advantages for drug delivery, as they are known to be biocompatible, biodegradable, and elicit no known immune response. These benefits suggest distinct advantages over currently used carriers for antibiotic drug delivery in orthopedic applications. (c) 2008 Wiley Periodicals, Inc.

78 FR 11654 - Draft Guidance for Industry and Food and Drug Administration Staff; Providing Information About...

Science.gov (United States)

2013-02-19

...] Draft Guidance for Industry and Food and Drug Administration Staff; Providing Information About... Guidance for Industry and Food and Drug Administration Staff: Providing Information About Pediatric Uses of...ComplianceRegulatoryInformation/default.htm . To receive ``Draft Guidance for Industry and Food and Drug...

Electrospinning of calcium phosphate-poly(D,L-lactic acid nanofibers for sustained release of water-soluble drug and fast mineralization

Directory of Open Access Journals (Sweden)

Fu QW

2016-10-01

Full Text Available Qi-Wei Fu,1,* Yun-Peng Zi,1,* Wei Xu,1 Rong Zhou,1 Zhu-Yun Cai,1 Wei-Jie Zheng,1 Feng Chen,2 Qi-Rong Qian1 1Department of Orthopedics, Changzheng Hospital, Second Military Medical University, 2State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, People’s Republic of China *These authors contributed equally to this work Abstract: Calcium phosphate-based biomaterials have been well studied in biomedical fields due to their outstanding chemical and biological properties which are similar to the inorganic constituents in bone tissue. In this study, amorphous calcium phosphate (ACP nanoparticles were prepared by a precipitation method, and used for preparation of ACP-poly(D,L-lactic acid (ACP-PLA nanofibers and water-soluble drug-containing ACP-PLA nanofibers by electrospinning. Promoting the encapsulation efficiency of water-soluble drugs in electrospun hydrophobic polymer nanofibers is a common problem due to the incompatibility between the water-soluble drug molecules and hydrophobic polymers solution. Herein, we used a native biomolecule of lecithin as a biocompatible surfactant to overcome this problem, and successfully prepared water-soluble drug-containing ACP-PLA nanofibers. The lecithin and ACP nanoparticles played important roles in stabilizing water-soluble drug in the electrospinning composite solution. The electrospun drug-containing ACP-PLA nanofibers exhibited fast mineralization in simulated body fluid. The ACP nanoparticles played the key role of seeds in the process of mineralization. Furthermore, the drug-containing ACP-PLA nanofibers exhibited sustained drug release which simultaneously occurred with the in situ mineralization in simulated body fluid. The osteoblast-like (MG63 cells with spreading filopodia were well observed on the as-prepared nanofibrous mats after culturing for 24 hours, indicating a high cytocompatibility. Due

pH triggered controlled drug delivery from contact lenses: Addressing the challenges of drug leaching during sterilization and storage.

Science.gov (United States)

Maulvi, Furqan A; Choksi, Harsh H; Desai, Ankita R; Patel, Akanksha S; Ranch, Ketan M; Vyas, Bhavin A; Shah, Dinesh O

2017-09-01

In the present work a novel cyclosporine-loaded Eudragit S100 (pH-sensitive) nanoparticles-laden contact lenses were designed to provide sustained release of cyclosporine at therapeutic rates, without leaching of drug during sterilization and storage period (shelf life). The nanoparticles were prepared by Quasi-emulsion solvent diffusion technique using different weight ratios of cyclosporine to Eudragit S100. The contact lenses with direct drug entrapment were also fabricated (DL-50) for comparison. The percentage swelling and optical transparency of nanoparticles-laden contact lenses were improved in comparison to DL-50 lenses. The nanoparticles-laden contact lenses showed sustained drug release profiles, with inverse relationship to the amount of nanoparticles loaded in the contact lenses. It was interesting to note that nanoparticles form nanochannels/cavities after dissolution of Eudragit S 100 in tear fluid pH=7.4 (in vitro release study). This followed the precipitation of drug in hydrogel matrix of contact lenses. As the amount of nanoparticles loading increased, more number of cavities were formed, which caused the formation of large cavities in contact lens matrix. This in turn precipitated the drug. The nanoparticles-laden contact lenses with 1:1 (drug: Eudragit) weight ratio showed the most promising results of sustaining the drug release up to 156h, without affecting optical and physical properties of contact lenses. Packaging study confirmed that the drug was not leached in packaging solution (buffer, pH=6.5) from nanoparticles-laden lenses during shelf life period. In-vivo study in rabbit tear fluid showed sustained release up to 14days. The study revealed the application of pH-sensitive nanoparticles-laden contact lenses for controlled release of cyclosporine without altering the optical and physical properties of lens material. Copyright © 2017 Elsevier B.V. All rights reserved.

LC for analysis of two sustained-release mixtures containing cough cold suppressant drugs.

Science.gov (United States)

El-Gindy, Alaa; Sallam, Shehab; Abdel-Salam, Randa A

2010-07-01

A liquid chromatographic method was applied for the analysis of two sustained-release mixtures containing dextromethorphane hydrobromide, carbinoxamine maleate with either phenylephrine hydrochloride in pharmaceutical capsules (Mix 1) or phenyl-propanolamine, methylparaben, and propylparaben, which bonds as a drug base to ion exchange resin in pharmaceutical syrup (Mix 2). The method was used for their simultaneous determination using a CN column with a mobile phase consisting of acetonitrile-12 mM ammonium acetate in the ratio of 60:40 (v/v, pH 6.0) for Mix 1 and 45:55 (v/v, pH 6.0) for Mix 2.

A Promising Approach to Provide Appropriate Colon Target Drug Delivery Systems of Vancomycin HCL: Pharmaceutical and Microbiological Studies

Directory of Open Access Journals (Sweden)

Kadria A. Elkhodairy

2014-01-01

Full Text Available Vancomycin HCl was prepared as orally administered colon target drug delivery tablets for systemic therapy. Tablet matrices containing 10–60% of tablet weight of guar gum (F1–F6 were prepared by direct compression and subjected to in vitro release studies to explore their sustained release in the colon. Various synthetic and natural polymers were incorporated to F6 to modify the drug release rate. Different 15 matrix tablet formulations (F6–F20 were enteric coated with hydroxypropyl methyl cellulose phthalate. F6, F13 and F20 showed promising sustained release results having median dissolution time (MDT values: 8.25, 7.97, and 7.64, respectively. Microbiological assay was performed to test the efficacy of F6, F13, and F20 to inhibit clinical Staphylococcus aureus (SA isolates. Bactericidal activity of F6 was reached after 2, 4, and 24 hours of incubation against MSSA 18, MRSA 29, and MRSA 11 strains, respectively, while it was reached within 6–8 hours in case of F13, and F20 against all strains tested. F13 enhanced log microbial reduction by 1.74, 0.65 and 2.4 CFU/mL compared to F6 while it was 1, 2.57 and 1.57 compared to F20 against MSSA18, MRSA11 and MRSA29, respectively. Vancomycin HCl tablets displayed a promising sustained release in vitro and microbiological inhibitory action on all isolates tested.

A promising approach to provide appropriate colon target drug delivery systems of vancomycin HCL: pharmaceutical and microbiological studies.

Science.gov (United States)

Elkhodairy, Kadria A; Afifi, Samar A; Zakaria, Azza S

2014-01-01

Vancomycin HCl was prepared as orally administered colon target drug delivery tablets for systemic therapy. Tablet matrices containing 10-60% of tablet weight of guar gum (F1-F6) were prepared by direct compression and subjected to in vitro release studies to explore their sustained release in the colon. Various synthetic and natural polymers were incorporated to F6 to modify the drug release rate. Different 15 matrix tablet formulations (F6-F20) were enteric coated with hydroxypropyl methyl cellulose phthalate. F6, F13 and F20 showed promising sustained release results having median dissolution time (MDT) values: 8.25, 7.97, and 7.64, respectively. Microbiological assay was performed to test the efficacy of F6, F13, and F20 to inhibit clinical Staphylococcus aureus (SA) isolates. Bactericidal activity of F6 was reached after 2, 4, and 24 hours of incubation against MSSA 18, MRSA 29, and MRSA 11 strains, respectively, while it was reached within 6-8 hours in case of F13, and F20 against all strains tested. F13 enhanced log microbial reduction by 1.74, 0.65 and 2.4 CFU/mL compared to F6 while it was 1, 2.57 and 1.57 compared to F20 against MSSA18, MRSA11 and MRSA29, respectively. Vancomycin HCl tablets displayed a promising sustained release in vitro and microbiological inhibitory action on all isolates tested.

Towards a sustainable system of drug development

NARCIS (Netherlands)

Moors, Ellen H.M.; Cohen, Adam F.; Schellekens, Huub

2014-01-01

Drug development has become the exclusive activity of large pharmaceutical companies. However, the output of new drugs has been decreasing for the past decade and the prices of new drugs have risen steadily, leading to access problems for many patients. By analyzing the history of drug development

Design and in vitro/in vivo evaluation of sustained-release floating tablets of itopride hydrochloride.

Science.gov (United States)

Ahmed, Sayed M; Ahmed Ali, Adel; Ali, Ahmed Ma; Hassan, Omiya A

2016-01-01

The aim of the present study was to improve the bioavailability of itopride (ITO) and sustain its action by formulating as a floating dosage form. Sustained-release floating tablets of ITO hydrochloride (HCl) were prepared by direct compression using different hydrocolloid polymers such as hydroxypropyl methylcellulose and ethylcellulose and/or methacrylic acid polymers Eudragit RSPM and Carbopol 934P. The floating property was achieved using an effervescent mixture of sodium bicarbonate and anhydrous citric acid (1:1 mol/mol). Hardness, friability, content uniformity, and dissolution rate of the prepared floating tablets were evaluated. The formulation F 10 composed of 28.5% Eudragit RSPM, 3% NaHCO 3 , and 7% citric acid provided sustained drug release. In vitro results showed sustained release of F 10 where the drug release percentage was 96.51%±1.75% after 24 hours ( P =0.031). The pharmacokinetic results indicated that the area under the curve (AUC 0-∞ ) of the prepared sustained-release floating tablets at infinity achieved 93.69 µg·h/mL compared to 49.89 µg·h/mL for the reference formulation (Ganaton ® ) and the relative bioavailability of the sustained-release formulation F 10 increased to 187.80% ( P =0.022). The prepared floating tablets of ITO HCl (F 10 ) could be a promising drug delivery system with sustained-release action and enhanced drug bioavailability.

Willingness to Provide a Hair Sample for Drug Testing among Electronic Dance Music Party Attendees.

Science.gov (United States)

Palamar, Joseph J; Salomone, Alberto; Cleland, Charles M; Sherman, Scott

2018-04-25

Non-disclosure of drug use on surveys is common and many drug users unknowingly ingest adulterant or replacement drugs, which leads to underreporting of use of these drugs. Biological testing can complement survey research, and hair-testing is an appealing method as many drugs are detectable for months post-use. We examined willingness to donate a hair sample to be tested among those surveyed in a population at high risk for consuming adulterated drugs-electronic dance music (EDM) party attendees. We surveyed 933 adults entering EDM parties in New York City in 2017. Hair donation response rates and reasons for refusal were examined from this cross-sectional study. A third (n = 312; 33.4%) provided a hair sample. Lack of interest (21.0%), lack of time (19.8%), not wanting a lock of hair cut (17.7%), and disinterest in having hair cut in public (13.8%) were the main reported reasons for refusal. 4.7% refused because they could not receive results. Past-year drug users were more likely to fear identification than non-users (p<.001). Asian participants were at lower odds of providing a hair sample (aOR = 0.53, 95% CI = 0.32-0.87), and those reporting past-year use of LSD (aOR = 1.62, 95% CI = 1.11-2.35), opioids (nonmedical; aOR = 1.93, 95% CI = 1.25-2.99), and/or methamphetamine (aOR = 3.43, 95% CI = 1.36-8.62) were at higher odds of providing a sample than non-users of these drugs. Only a third of participants provided a hair sample and we found individual-level differences regarding willingness to provide a sample. Factors contributing to refusal should be considered to increase response rates and generalizability of results.

Non-opioid anesthetic drug abuse among anesthesia care providers: a narrative review.

Science.gov (United States)

Zuleta-Alarcón, Alix; Coffman, John C; Soghomonyan, Suren; Papadimos, Thomas J; Bergese, Sergio D; Moran, Kenneth R

2017-02-01

The objective of this narrative review is to provide an overview of the problem of non-opioid anesthetic drug abuse among anesthesia care providers (ACPs) and to describe current approaches to screening, therapy, and rehabilitation of ACPs suffering from non-opioid anesthetic drug abuse. We first performed a search of all literature available on PubMed prior to April 11, 2016. The search was limited to articles published in Spanish and English, and the following key words were used: anesthesiology, anesthesia personnel, AND substance-related disorders. We also searched Ovid MEDLINE ® databases from 1946-April 11, 2016 using the following search terms: anesthesiology OR anesthesia, OR nurse anesthetist OR anesthesia care provider OR perioperative nursing AND substance-related disorders. Despite an increased awareness of drug abuse among ACPs and improvements in preventive measures, the problem of non-opioid anesthetic drug abuse remains significant. While opioids are the most commonly abused anesthesia medications among ACPs, the abuse of non-opioid anesthetics is a significant cause of morbidity, mortality, and professional demise. Early detection, effective therapy, and long-term follow-up help ACPs cope more effectively with the problem and, when possible, resume their professional activities. There is insufficient evidence to determine the ability of ACPs to return safely to anesthesia practice after rehabilitation, though awareness of the issue and ongoing treatment are necessary to minimize patient risk from potentially related clinical errors.

21 CFR 200.200 - Prescription drugs; reminder advertisements and reminder labeling to provide price information to...

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Prescription drugs; reminder advertisements and reminder labeling to provide price information to consumers. 200.200 Section 200.200 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL GENERAL Prescription Drug Consumer Price Listing §...

Perfluorocarbon (PFC) emulsions as potential drug carriers

International Nuclear Information System (INIS)

Yuhas, J.M.; Goodman, R.L.; Moore, R.E.

1984-01-01

PFC emulsions have excellent oxygen transporting properties and have been reported to enhance the response of murine tumors to both radiation and BCNU. While the presently available emulsions are far too toxic to the immune system to be used in cancer therapy, they can be used to investigate the overall potential of this approach. As an example, the authors have found that these emulsions can alter drug availability. The lipophilicity of both the PFC and the drug in question determine the partitioning of the drug between the organic and aqueous phases of an emulsion. In vitro, this can reduce drug effectiveness by reducing the amount of drug available to the cells. In vivo, however, this partitioning may produce sustained drug exposure, which could be of benefit in cancer therapy and other applications. In brief, as the drug is absorbed from the circulating aqueous phase, additional drug would leach from the PFC, thereby providing a sustained drug exposure similar to that obtained with liposomes. While a great deal more work will be required to evaluate the practicality of this approach, the existence of this phenomenon must be taken into account in both the design and interpretation of efficacy studies in which anesthetics, chemotherapeutics, etc are employed

Sustained drug release and electrochemical performance of ethyl cellulose-magnesium hydrogen phosphate composite

International Nuclear Information System (INIS)

Mohammad, Faruq; Arfin, Tanvir; Al-Lohedan, Hamad A.

2017-01-01

In this, a sol-gel method was applied to prepare ethyl cellulose-magnesium hydrogen phosphate (EC-MgHPO 4 ) composite that can have potential applications in the sensory, pharmaceutical, and biomedical sectors. The formed composite was thoroughly characterized by making use of the instrumental analysis such as UV–Vis, FT-IR, HRTEM, EDAX, SEM and XRD. For the composite, the other parameters determined includes the water uptake, porosity, thickness, bulk and tapped densities, angle of repose, Carr's index and Hausner ratio. From the results, the material found to exhibit good flowing properties with a Carr's index of 11.11%, Hausner ratio of 1.125, and angle of response of 33°. The EDAX spectrum and HRTEM analysis confirmed for the composite formation and the particles size is investigated to be around 52 nm. The surface porosity due to the EC matrices was confirmed by the SEM analysis, which further used for the loading of drug, Proguanil. In addition, the material's conductivity was studied by taking uni-univalent electrolyte solution (KCl and NaCl) indicated that the conductivity follows the order of KCl > NaCl, while the activation energy obtained from Arrhenius method resembled that the conductivity is strongly influenced by the electrolyte type used. We found from the analysis that, with a decrease in the size of hydrated radii of ions, the conductivity of EC-MgHPO 4 material also observed to be decreased in the order K + > Na + and the material proved to be mechanically stable and can be operated over a range of pHs, temperatures, and electrolyte solutions. Further, the drug loading and efficiency studies indicated that the material can trap up to 80% of Proguanil (antimalarial drug) applied for its loading. The Proguanil drug release profiles confirmed for the controlled and sustained release from the EC-MgHPO 4 matrix, as the material can release up to 87% of its total loaded drug over a 90 min period. Finally, the cell viability and

Sustained drug release and electrochemical performance of ethyl cellulose-magnesium hydrogen phosphate composite

Energy Technology Data Exchange (ETDEWEB)

Mohammad, Faruq, E-mail: fmohammad@ksu.edu.sa [Surfactant Research chair, Department of Chemistry, College of Science, King Saud University, P.O. Box 2455, Riyadh 11451 (Saudi Arabia); Arfin, Tanvir, E-mail: t_arfin@neeri.res.in [Environmental Materials Division, CSIR-National Environmental Engineering Research Institute (CSIR-NEERI), Nehru Marg, Nagpur 440020 (India); Al-Lohedan, Hamad A. [Surfactant Research chair, Department of Chemistry, College of Science, King Saud University, P.O. Box 2455, Riyadh 11451 (Saudi Arabia)

2017-02-01

In this, a sol-gel method was applied to prepare ethyl cellulose-magnesium hydrogen phosphate (EC-MgHPO{sub 4}) composite that can have potential applications in the sensory, pharmaceutical, and biomedical sectors. The formed composite was thoroughly characterized by making use of the instrumental analysis such as UV–Vis, FT-IR, HRTEM, EDAX, SEM and XRD. For the composite, the other parameters determined includes the water uptake, porosity, thickness, bulk and tapped densities, angle of repose, Carr's index and Hausner ratio. From the results, the material found to exhibit good flowing properties with a Carr's index of 11.11%, Hausner ratio of 1.125, and angle of response of 33°. The EDAX spectrum and HRTEM analysis confirmed for the composite formation and the particles size is investigated to be around 52 nm. The surface porosity due to the EC matrices was confirmed by the SEM analysis, which further used for the loading of drug, Proguanil. In addition, the material's conductivity was studied by taking uni-univalent electrolyte solution (KCl and NaCl) indicated that the conductivity follows the order of KCl > NaCl, while the activation energy obtained from Arrhenius method resembled that the conductivity is strongly influenced by the electrolyte type used. We found from the analysis that, with a decrease in the size of hydrated radii of ions, the conductivity of EC-MgHPO{sub 4} material also observed to be decreased in the order K{sup +} > Na{sup +} and the material proved to be mechanically stable and can be operated over a range of pHs, temperatures, and electrolyte solutions. Further, the drug loading and efficiency studies indicated that the material can trap up to 80% of Proguanil (antimalarial drug) applied for its loading. The Proguanil drug release profiles confirmed for the controlled and sustained release from the EC-MgHPO{sub 4} matrix, as the material can release up to 87% of its total loaded drug over a 90 min period. Finally, the

Financial Burden of Cancer Drug Treatment in Lebanon.

Science.gov (United States)

Elias, Fadia; Khuri, Fadlo R; Adib, Salim M; Karam, Rita; Harb, Hilda; Awar, May; Zalloua, Pierre; Ammar, Walid

2016-01-01

The Ministry of Public Health (MOPH) in Lebanon provides cancer drugs free of charge for uninsured patients who account for more than half the total caseload. Other categories of cancer care are subsidized under more stringent eligibility criteria. MOPH's large database offers an excellent opportunity to analyze the cost of cancer treatment in Lebanon. Using utilization and spending data accumulated at MOPH during 20082013, the cost to the public budget of cancer drugs was assessed per case and per drug type. The average annual cost of cancer drugs was 6,475$ per patient. Total cancer drug costs were highest for breast cancer, followed by chronic myeloid leukemia (CML), colorectal cancer, lung cancer, and NonHodgkin's lymphoma (NHL), which together represented 74% of total MOPH cancer drug expenditure. The annual average cancer drug cost per case was highest for CML ($31,037), followed by NHL ($11,566). Trastuzumab represented 26% and Imatinib 15% of total MOPH cancer drug expenditure over six years. Sustained increase in cancer drug cost threatens the sustainability of MOPH coverage, so crucial for socially vulnerable citizens. To enhance the bargaining position with pharmaceutical firms for drug cost containment in a small market like Lebanon, drug price comparisons with neighboring countries which have already obtained lower prices may succeed in lowering drug costs.

Drug-Target Kinetics in Drug Discovery.

Science.gov (United States)

Tonge, Peter J

2018-01-17

The development of therapies for the treatment of neurological cancer faces a number of major challenges including the synthesis of small molecule agents that can penetrate the blood-brain barrier (BBB). Given the likelihood that in many cases drug exposure will be lower in the CNS than in systemic circulation, it follows that strategies should be employed that can sustain target engagement at low drug concentration. Time dependent target occupancy is a function of both the drug and target concentration as well as the thermodynamic and kinetic parameters that describe the binding reaction coordinate, and sustained target occupancy can be achieved through structural modifications that increase target (re)binding and/or that decrease the rate of drug dissociation. The discovery and deployment of compounds with optimized kinetic effects requires information on the structure-kinetic relationships that modulate the kinetics of binding, and the molecular factors that control the translation of drug-target kinetics to time-dependent drug activity in the disease state. This Review first introduces the potential benefits of drug-target kinetics, such as the ability to delineate both thermodynamic and kinetic selectivity, and then describes factors, such as target vulnerability, that impact the utility of kinetic selectivity. The Review concludes with a description of a mechanistic PK/PD model that integrates drug-target kinetics into predictions of drug activity.

Modulating drug release from gastric-floating microcapsules through spray-coating layers.

Directory of Open Access Journals (Sweden)

Wei Li Lee

Full Text Available Floating dosage forms with prolonged gastric residence time have garnered much interest in the field of oral delivery. However, studies had shown that slow and incomplete release of hydrophobic drugs during gastric residence period would reduce drug absorption and cause drug wastage. Herein, a spray-coated floating microcapsule system was developed to encapsulate fenofibrate and piroxicam, as model hydrophobic drugs, into the coating layers with the aim of enhancing and tuning drug release rates. Incorporating fenofibrate into rubbery poly(caprolactone (PCL coating layer resulted in a complete and sustained release for up to 8 h, with outermost non-drug-holding PCL coating layer serving as a rate-controlling membrane. To realize a multidrug-loaded system, both hydrophilic metformin HCl and hydrophobic fenofibrate were simultaneously incorporated into these spray-coated microcapsules, with metformin HCl and fenofibrate localized within the hollow cavity of the capsule and coating layer, respectively. Both drugs were observed to be completely released from these coated microcapsules in a sustained manner. Through specific tailoring of coating polymers and their configurations, piroxicam loaded in both the outer polyethylene glycol and inner PCL coating layers was released in a double-profile manner (i.e. an immediate burst release as the loading dose, followed by a sustained release as the maintenance dose. The fabricated microcapsules exhibited excellent buoyancy in simulated gastric fluid, and provided controlled and sustained release, thus revealing its potential as a rate-controlled oral drug delivery system.

Sympathetic Blocks Provided Sustained Pain Relief in a Patient with Refractory Painful Diabetic Neuropathy

Directory of Open Access Journals (Sweden)

Jianguo Cheng

2012-01-01

Full Text Available The sympathetic nervous system has been implicated in pain associated with painful diabetic neuropathy. However, therapeutic intervention targeted at the sympathetic nervous system has not been established. We thus tested the hypothesis that sympathetic nerve blocks significantly reduce pain in a patient with painful diabetic neuropathy who has failed multiple pharmacological treatments. The diagnosis of small fiber sensory neuropathy was based on clinical presentations and confirmed by skin biopsies. A series of 9 lumbar sympathetic blocks over a 26-month period provided sustained pain relief in his legs. Additional thoracic paravertebral blocks further provided control of the pain in the trunk which can occasionally be seen in severe diabetic neuropathy cases, consequent to extensive involvement of the intercostal nerves. These blocks provided sustained and significant pain relief and improvement of quality of life over a period of more than two years. We thus provided the first clinical evidence supporting the notion that sympathetic nervous system plays a critical role in painful diabetic neuropathy and sympathetic blocks can be an effective management modality of painful diabetic neuropathy. We concluded that the sympathetic nervous system is a valuable therapeutic target of pharmacological and interventional modalities of treatments in painful diabetic neuropathy patients.

Applications of nanoparticle systems in drug delivery technology

Directory of Open Access Journals (Sweden)

Syed A.A. Rizvi

2018-01-01

Full Text Available The development of nanoparticle-based drug formulations has yielded the opportunities to address and treat challenging diseases. Nanoparticles vary in size but are generally ranging from 100 to 500 nm. Through the manipulation of size, surface characteristics and material used, the nanoparticles can be developed into smart systems, encasing therapeutic and imaging agents as well as bearing stealth property. Further, these systems can deliver drug to specific tissues and provide controlled release therapy. This targeted and sustained drug delivery decreases the drug related toxicity and increase patient’s compliance with less frequent dosing. Nanotechnology has proven beneficial in the treatment of cancer, AIDS and many other disease, also providing advancement in diagnostic testing.

Adequacy of pharmacological information provided in pharmaceutical drug advertisements in African medical journals.

Directory of Open Access Journals (Sweden)

Oshikoya KA

2009-06-01

manufacturer on both the container and pack of the drug} were mentioned in 65.6% and 50% adverts, respectively. The product and package descriptions were provided in 57 (72.2% Nigerian medical journals, which was significantly higher than in other African medical journals 39 (37.9% (P<0.001.Conclusions: None of the drug advertisements in the journals adequately provided the basic information required by the WHO for appropriate prescribing. More guidance and regulation is needed to ensure adequate information is provided.

Design of sustained release fine particles using two-step mechanical powder processing: particle shape modification of drug crystals and dry particle coating with polymer nanoparticle agglomerate.

Science.gov (United States)

Kondo, Keita; Ito, Natsuki; Niwa, Toshiyuki; Danjo, Kazumi

2013-09-10

We attempted to prepare sustained release fine particles using a two-step mechanical powder processing method; particle-shape modification and dry particle coating. First, particle shape of bulk drug was modified by mechanical treatment to yield drug crystals suitable for the coating process. Drug crystals became more rounded with increasing rotation speed, which demonstrates that powerful mechanical stress yields spherical drug crystals with narrow size distribution. This process is the result of destruction, granulation and refinement of drug crystals. Second, the modified drug particles and polymer coating powder were mechanically treated to prepare composite particles. Polymer nanoparticle agglomerate obtained by drying poly(meth)acrylate aqueous dispersion was used as a coating powder. The porous nanoparticle agglomerate has superior coating performance, because it is completely deagglomerated under mechanical stress to form fine fragments that act as guest particles. As a result, spherical drug crystals treated with porous agglomerate were effectively coated by poly(meth)acrylate powder, showing sustained release after curing. From these findings, particle-shape modification of drug crystals and dry particle coating with nanoparticle agglomerate using a mechanical powder processor is expected as an innovative technique for preparing controlled-release coated particles having high drug content and size smaller than 100 μm. Copyright © 2013 Elsevier B.V. All rights reserved.

Preparation and evaluation of a timolol maleate drug-resin ophthalmic suspension as a sustained-release formulation in vitro and in vivo.

Science.gov (United States)

Qin, Fuhong; Zeng, Li; Zhu, Yongtao; Cao, Jingjing; Wang, Xiaohui; Liu, Wei

2016-01-01

The aim of this work was to assess the performance of resin as an ocular delivery system. Timolol maleate (TM) was chosen as the model drug and an ion exchange resin (IER) as the carrier. The drug-resin complex was prepared using an oscillation method and then characterized regarding particle size, zeta potential, morphology, and drug content. After in vitro drug release study and corneal permeation study were performed, in vivo studies were performed in New Zealand albino rabbits using a suspension with particles sized 4.8 ± 1.2 μm and drug loading at 43.00 ± 0.09%. The results indicate that drug released from the drug-resin ophthalmic suspension permeated the cornea and displayed a sustained-release behavior. Drug levels in the ocular tissues after administration of the drug-resin ophthalmic suspension were significantly higher than after treatment with an eye drop formulation but were lower in body tissues and in the plasma. In conclusion, resins have great potential as effective ocular drug delivery carriers to increase ocular bioavailability of timolol while simultaneously reducing systemic drug absorption.

Improving graduation rates for African Americans in drug court: Importance of human relationships and barriers to gaining and sustaining employment.

Science.gov (United States)

Gallagher, John Robert; Nordberg, Anne; Dibley, Alyssa R

2017-11-16

Drug courts have been an important part of the criminal justice system since 1989. They continue to expand throughout the United States because nearly three decades of research has shown that they are more effective than other interventions, such as traditional probation. There is a pattern, though, in some drug courts where African Americans are less likely to graduate than their Caucasian counterparts. This qualitative study explores this phenomenon by asking African American participants (n = 31) their views on the most helpful aspects of drug court and how drug court could be more helpful in supporting them in graduating the program. Participants felt that the respect and compassion they received from the drug court judge and their case managers, as well as the camaraderie they developed with other participants, was an aspect of drug court that supported them in graduating the program. Next, participants felt that graduation rates would improve if drug court better supported them in gaining employment or sustaining the employment they already had. Implications for drug court practice are discussed.

Sustainable medication: Microtechnology for personalizing drug treatment

DEFF Research Database (Denmark)

Faralli, Adele; Melander, Fredrik; Andresen, Thomas Lars

2014-01-01

drug dosing” using light-­‐polymerizable polymer hydrogels as carriers for free or nanoparticle-­‐encapsulated drugs. The total dose is simply controlled by the volume of drug-­‐loaded cross-­‐ linked hydrogel defined by patterned light from a standard projector (Fig. 1). The concept enables simple...

Stigmatization of alcohol and other drug users by primary care providers in Southeast Brazil.

Science.gov (United States)

Ronzani, Telmo Mota; Higgins-Biddle, John; Furtado, Erikson F

2009-10-01

This study reports on the views of Primary Health Care (PHC) providers in Southeast Brazil on the use of alcohol and other drugs which reflect stigma, moralization, or negative judgment. Six hundred nine PHC professionals from the Brazilian states of São Paulo and Minas Gerais took part in the study. The majority (86.5%) of these professionals were female. Attitudes toward the use of alcohol and other drugs were evaluated in comparison to Hansen's disease, obesity, depression, schizophrenia, HIV/AIDS, and tobacco use. The use of tobacco, marijuana/cocaine, and alcohol were the most negatively judged behaviors (p health care workers demonstrated the severest judgment of alcohol use. In addition, marijuana/cocaine addicts and alcoholics suffered the highest rate of rejection by professionals. The hypothesis that the use of alcohol and other drugs is a behavior stigmatized by health professionals being confirmed, it is important to develop strategies for changing provider attitudes in order to provide a higher quality of service to these patients. This study is important as a first study among PHC professionals about social stigma of alcohol and other drugs users.

Promotion of prescription drugs to consumers and providers, 2001-2010.

Directory of Open Access Journals (Sweden)

Rachel Kornfield

Full Text Available Pharmaceutical firms heavily promote their products and may have changed marketing strategies in response to reductions in new product approvals, restrictions on some forms of promotion, and the expanding role of biologic therapies.We used descriptive analyses of annual cross-sectional data from 2001 through 2010 to examine direct-to-consumer advertising (DTCA (Kantar Media and provider-targeted promotion (IMS Health and SDI, including: (1 inflation-adjusted total promotion spending ($ and percent of sales; (2 distribution by channel (consumer v. provider; and (3 provider specialty both for the industry as a whole and for top-selling biologic and small molecule therapies.Total promotion peaked in 2004 at US$36.1 billion (13.4% of sales. By 2010 it had declined to $27.7B (9.0% of sales. Between 2006 and 2010, similar declines were seen for promotion to providers and DTCA (both by 25%. DTCA's share of total promotion increased from 12% in 2002 to 18% in 2006, but then declined to 16% and remains highly concentrated. Number of products promoted to providers peaked in 2004 at over 3000, and then declined 20% by 2010. In contrast to top-selling small molecule therapies having an average of $370 million (8.8% of sales spent on promotion, top biologics were promoted less, with only $33 million (1.4% of sales spent per product. Little change occurred in the composition of promotion between primary care physicians and specialists from 2001-2010.These findings suggest that pharmaceutical companies have reduced promotion following changes in the pharmaceutical pipeline and patent expiry for several blockbuster drugs. Promotional strategies for biologic drugs differ substantially from small molecule therapies.

Promotion of prescription drugs to consumers and providers, 2001-2010.

Science.gov (United States)

Kornfield, Rachel; Donohue, Julie; Berndt, Ernst R; Alexander, G Caleb

2013-01-01

Pharmaceutical firms heavily promote their products and may have changed marketing strategies in response to reductions in new product approvals, restrictions on some forms of promotion, and the expanding role of biologic therapies. We used descriptive analyses of annual cross-sectional data from 2001 through 2010 to examine direct-to-consumer advertising (DTCA) (Kantar Media) and provider-targeted promotion (IMS Health and SDI), including: (1) inflation-adjusted total promotion spending ($ and percent of sales); (2) distribution by channel (consumer v. provider); and (3) provider specialty both for the industry as a whole and for top-selling biologic and small molecule therapies. Total promotion peaked in 2004 at US$36.1 billion (13.4% of sales). By 2010 it had declined to $27.7B (9.0% of sales). Between 2006 and 2010, similar declines were seen for promotion to providers and DTCA (both by 25%). DTCA's share of total promotion increased from 12% in 2002 to 18% in 2006, but then declined to 16% and remains highly concentrated. Number of products promoted to providers peaked in 2004 at over 3000, and then declined 20% by 2010. In contrast to top-selling small molecule therapies having an average of $370 million (8.8% of sales) spent on promotion, top biologics were promoted less, with only $33 million (1.4% of sales) spent per product. Little change occurred in the composition of promotion between primary care physicians and specialists from 2001-2010. These findings suggest that pharmaceutical companies have reduced promotion following changes in the pharmaceutical pipeline and patent expiry for several blockbuster drugs. Promotional strategies for biologic drugs differ substantially from small molecule therapies.

Review of pharmacological interactions of oral anticancer drugs provided at pharmacy department

Directory of Open Access Journals (Sweden)

E. Sánchez Gómez

2014-07-01

Full Text Available Abstract: Objective: To identify the pharmacologic interactions of oral anti-cancer drugs provided at an outpatient clinic. Material and methods: Anti-cancer drugs included in the Phamacotherapeutic Guideline of the Hospital were identified. A literature search was carried out on the pharmacologic interactions in MEDLINE® and EMBASE® (with the filer language English or Spanish, and the descriptors: “name of the anti-cancer drug” AND (“drug interactions” OR “pharmacokinetic”, Up-to-date®, MICROMEDEX® and the drug information sheet for the EMA and the FDA. Information was also gathered from the abstract presented to European and Spanish scientific meetings for the last 4 years. When an interaction was analyzed and had clinical relevance, the best pharmacotherapeutic interaction-free alternative was sought. Results: Twenty-three drugs were identified, of which Chlorambucil, Fludarabine, Lenalidomide, Melphalan, and Thalidomide were the active compounds with the lowest likelihood of producing a pharmacologic interaction. Tyrosine kinase inhibitors (particularly Erlotinib, Imatinib, Lapatinib, and Pazopanib are the drugs with highest number of pharmacologic interactions described, many of them with severe clinical consequences, with increases and decreases of the plasma levels of anti-cancer drugs. The active compounds identified that may have pharmacologic interactions with anticancer drugs were mainly: Allopurinol, Amiodarone, Carbamazepine, Dabigatran, Digoxin, Spironolactone, Phenytoin, Itraconazol, Repaglinide, Silodosin, Tamoxifen, Verapamil, and Warfarin. Pharmacologic interactions through the cytochrome P450 1A2, 2D6, 2C8, 2C9, 3A4 were the most important for tyrosine kinase inhibitors. Other non-pharmacologic compounds, with an important potential of producing relevant pharmacologic interaction were immunomodulators (Echinacea extracts and Hypericum perforatum. Conclusions: Oral anticancer drugs have numerous pharmacologic

Drug release kinetic analysis and prediction of release data via polymer molecular weight in sustained release diltiazem matrices.

Science.gov (United States)

Adibkia, K; Ghanbarzadeh, S; Mohammadi, G; Khiavi, H Z; Sabzevari, A; Barzegar-Jalali, M

2014-03-01

This study was conducted to investigate the effects of HPMC (K4M and K100M) as well as tragacanth on the drug release rate of diltiazem (DLTZ) from matrix tablets prepared by direct compression method.Mechanism of drug transport through the matrices was studied by fitting the release data to the 10 kinetic models. 3 model independent parameters; i. e., mean dissolution time (MDT), mean release rate (MRR) and release rate efficacy (RE) as well as 5 time point approaches were established to compare the dissolution profiles. To find correlation between fraction of drug released and polymer's molecular weight, dissolution data were fitted into two proposed equations.All polymers could sustain drug release up to 10 h. The release data were fitted best to Peppas and Higuchi square root kinetic models considering squared correlation coefficient and mean percent error (MPE). RE and MRR were decreased when polymer to drug ratio was increased. Conversely, t60% was increased with raising polymer /drug ratio. The fractions of drug released from the formulations prepared with tragacanth were more than those formulated using the same amount of HPMC K4M and HPMC K100M.Preparation of DLTZ matrices applying HPMCK4M, HPMC K100M and tragacanth could effectively extend the drug release. © Georg Thieme Verlag KG Stuttgart · New York.

Supermolecular drug challenge to overcome drug resistance in cancer cells.

Science.gov (United States)

Onishi, Yasuhiko; Eshita, Yuki; Ji, Rui-Cheng; Kobayashi, Takashi; Onishi, Masayasu; Mizuno, Masaaki; Yoshida, Jun; Kubota, Naoji

2018-06-04

Overcoming multidrug resistance (MDR) of cancer cells can be accomplished using drug delivery systems in large-molecular-weight ATP-binding cassette transporters before entry into phagolysosomes and by particle-cell-surface interactions. However, these hypotheses do not address the intratumoral heterogeneity in cancer. Anti-MDR must be related to alterations of drug targets, expression of detoxification, as well as altered proliferation. In this study, it is shown that the excellent efficacy and sustainability of anti-MDR is due to a stable ES complex because of the allosteric facilities of artificial enzymes when they are used as supramolecular complexes. The allosteric effect of supermolecular drugs can be explained by the induced-fit model and can provide stable feedback control systems through the loop transfer function of the Hill equation. Copyright © 2018 Elsevier Ltd. All rights reserved.

Based Indomethacin Sustained-Release Tablets

African Journals Online (AJOL)

Owing to the short biological half-life of this drug, a sustained ... tendency. This work is aimed at formulating sustained ... Chemie GmbH, Germany), Phospholipon® 90H. (Phospholipid ... weighed out in an analytical balance and dispersed in ...

Chitosan and its derivatives for application in mucoadhesive drug delivery systems

OpenAIRE

Ways, Twana Mohammed M.; Lau, Wing Man; Khutoryanskiy, Vitaliy V.

2018-01-01

Mucoadhesive drug delivery systems are desirable as they can increase the residence time of drugs at the site of absorption/action, provide sustained drug release and minimize the degradation of drugs in various body sites. Chitosan is a cationic polysaccharide that exhibits mucoadhesive properties and it has been widely used in the design of mucoadhesive dosage forms. However, its limited mucoadhesive strength and limited water-solubility at neutral and basic pHs are considered as two major ...

Chitosan and Its Derivatives for Application in Mucoadhesive Drug Delivery Systems

OpenAIRE

Twana Mohammed M. Ways; Wing Man Lau; Vitaliy V. Khutoryanskiy

2018-01-01

Mucoadhesive drug delivery systems are desirable as they can increase the residence time of drugs at the site of absorption/action, provide sustained drug release and minimize the degradation of drugs in various body sites. Chitosan is a cationic polysaccharide that exhibits mucoadhesive properties and it has been widely used in the design of mucoadhesive dosage forms. However, its limited mucoadhesive strength and limited water-solubility at neutral and basic pHs are considered as two major ...

Contrast-Enhanced Ultrasonography of Hepatocellular Carcinoma After Chemoembolisation Using Drug-Eluting Beads: A Pilot Study Focused on Sustained Tumor Necrosis

International Nuclear Information System (INIS)

Moschouris, Hippocrates; Malagari, Katerina; Papadaki, Marina Georgiou; Kornezos, Ioannis; Matsaidonis, Dimitrios

2010-01-01

The purpose of this study was to assess the use of contrast-enhanced ultrasonography (CEUS) and the sustained antitumor effect of drug-eluting beads used for transarterial chemoembolisation (TACE) of unresectable hepatocellular carcinoma (HCC). Ten patients with solitary, unresectable HCC underwent CEUS before, 2 days after, and 35 to 40 days after TACE using a standard dose (4 ml) of drug-eluting beads (DC Beads; Biocompatibles, Surrey, UK) preloaded with doxorubicin (25 mg doxorubicin/ml hydrated beads). For CEUS, a second-generation contrast agent (SonoVue, Bracco, Milan, Italy) and a low mechanical-index technique were used. A part of the tumor was characterized as necrotic if it showed complete lack of enhancement. The percentage of necrosis was calculated at the sonographic section that depicted the largest diameter of the tumor. Differences in the extent of early (2 days after TACE) and delayed (35 to 40 days after TACE) necrosis were quantitatively and subjectively assessed. Early post-TACE tumor necrosis ranged from 21% to 70% (mean 43.5% ± 19%). There was a statistically significant (p = 0.0012, paired Student t test) higher percentage of delayed tumor necrosis, which ranged from 24% to 88% (mean 52.3% ± 20.3%). Subjective evaluation showed a delayed obvious increase of the necrotic areas in 5 patients. In 2 patients, tumor vessels that initially remained patent disappeared on the delayed follow-up. A part of tumor necrosis after chemoembolisation of HCC with DEB seems to take place later than 2 days after TACE. CEUS may provide evidence for the sustained antitumor effect of DEB-TACE. Nevertheless, the ideal time for the imaging evaluation of tumor response remains to be defined.

A model of sustainable development of scientific research health institutions, providing high-tech medical care

Directory of Open Access Journals (Sweden)

I. Yu. Bedoreva

2017-01-01

Full Text Available The issue of sustainability is relevant for all types of businesses and organizations. Long-term development has always been and remains one of the most difficult tasks faced by organizations. The implementation the provisions of international standards ISO series 9000 has proven to be effective. The ISO standards are concentrated on the global experience for sustainable success of organizations. The standards incorporated all the rational that has been accumulated in this field of knowledge and practice. These standards not only eliminate technical barriers in collaboration and have established standardized approaches, but also serve as a valuable source of international experience and ready management solutions. They became a practical guide for the creation of management systems for sustainable development in organizations of different spheres of activity.Problem and purpose. The article presents the author’s approach to the problem of sustainable development health of the organization. The purpose of this article is to examine the approaches to management for sustainable success of organizations and to describe a model of sustainable development applied in research healthcare institutions providing high-tech medical care.Methodology. The study used general scientific methods of empirical and theoretical knowledge, general logical methods and techniques and methods of system analysis, comparison, analogy, generalization, the materials research for the development of medical organizations.The main results of our work are to first develop the technique of complex estimation of activity of the scientific-research institutions of health and deploy key elements of the management system that allows the level of maturity of the management system of the institution to be set in order to identify its strengths and weaknesses, and to identify areas for improvements and innovation, and to set priorities for determining the sequence of action when

Protein-Based Drug-Delivery Materials

Directory of Open Access Journals (Sweden)

Dave Jao

2017-05-01

Full Text Available There is a pressing need for long-term, controlled drug release for sustained treatment of chronic or persistent medical conditions and diseases. Guided drug delivery is difficult because therapeutic compounds need to survive numerous transport barriers and binding targets throughout the body. Nanoscale protein-based polymers are increasingly used for drug and vaccine delivery to cross these biological barriers and through blood circulation to their molecular site of action. Protein-based polymers compared to synthetic polymers have the advantages of good biocompatibility, biodegradability, environmental sustainability, cost effectiveness and availability. This review addresses the sources of protein-based polymers, compares the similarity and differences, and highlights characteristic properties and functionality of these protein materials for sustained and controlled drug release. Targeted drug delivery using highly functional multicomponent protein composites to guide active drugs to the site of interest will also be discussed. A systematical elucidation of drug-delivery efficiency in the case of molecular weight, particle size, shape, morphology, and porosity of materials will then be demonstrated to achieve increased drug absorption. Finally, several important biomedical applications of protein-based materials with drug-delivery function—including bone healing, antibiotic release, wound healing, and corneal regeneration, as well as diabetes, neuroinflammation and cancer treatments—are summarized at the end of this review.

Sustainable Water Infrastructure Asset Management: A Gap Analysis of Customer and Service Provider Perspectives

Directory of Open Access Journals (Sweden)

Sangjong Han

2015-09-01

Full Text Available The ultimate goal of urban water infrastructure asset management may be sustainable water supply with satisfaction for customers. In this work, we attempted to evaluate the gaps between the perspectives of customers and service providers in Korea’s water infrastructure asset management. To evaluate the customers’ perspective, a hierarchical questionnaire survey was conducted to estimate the weights of influence for six customer values and their attributes on Korean water utility management. To evaluate the service providers’ perspective, an AHP (Analytic Hierarchy Process analysis was performed to estimate the weights of influence for the customer values and their PIs (performance indicators. The gap analysis results show that customers place higher value on customer service satisfaction (emotion and information than do the service providers (managers, whereas the managers place more value on affordability than do the customers. The findings from this work imply that improving customer service is effective in satisfying the desirable water LOS (level of service for customers. Recommendations have also been provided for administrators and engineers to develop integrated decision-making systems that can reflect customer needs regarding the improvement of their water infrastructure asset management. The findings from this work may be helpful for the Korean government and water supply utilities in improving the sustainability of their water infrastructure asset management.

Provider Strategies and the Greening of Consumption Practices: Exploring the Role of Companies in Sustainable Consumption

NARCIS (Netherlands)

Spaargaren, G.; Koppen, van C.S.A.

2009-01-01

Making consumption practices more sustainable means incorporating new ideas, information and products into existing consumption routines of citizen-consumers. For a successful incorporation process it is crucial that companies, as main providers of new products and services, develop an active

Health care providers' use of a drug information service for pregnancy-related inquiries.

Science.gov (United States)

Patil, Avinash S; Patil, Neelima P; Lewis, Ashley N; Swamy, Geeta K; Murtha, Amy P

2014-01-01

To characterize pregnancy and lactation-related medication inquiries to a drug information center to identify classes of medications of most concern to providers. A secondary objective was to identify any trends in provider inquiries over the study period. A retrospective descriptive study of pregnancy and lactation-related inquiries to the University of North Carolina Health Care System Drug Information Center database between January 2001 and December 2010. University of North Carolina Health Care System Drug Information Center. Provider inquiries and responses were extracted and characterized by indication for treatment and reason for inquiry. Comparison of the first and second 5-year periods was performed to delineate trends. Descriptive statistics, Fisher's Exact and χ2 tests were used for analysis. Inquiry origin, time, and subject. 433 inquiries were retrieved over the study period from physicians (50%), pharmacists (21%), and nurses (18%). Inquiries were most often made during the antepartum period (34%), followed by the postpartum (28%) and preconception (22%) periods. The most frequent indications for inquiry were psychiatry (15%) and infectious diseases (14%), which remained constant throughout the study period. Safety was the most common reason for inquiry (52%). The responses provided to callers were limited due to lack of information availability 37% of the time. Psychiatry and infectious disease-related indications are the most frequent subjects of provider inquiry regarding medication use in pregnancy. Rates of inquiry remained constant throughout the past decade in most therapeutic areas. These findings are consistent with previous observations in other developed countries and suggest high-yield areas for pharmacist education.

Physical-chemical aspects of a coaxial sustained release device based on Poly-Eva

NARCIS (Netherlands)

Laarhoven, Johannes Antonius Hendrikus van

2005-01-01

Sustained release of dugs offers several advantages like increased efficacy, safety, compliance and convenience. As a consequence sustained drug delivery is often preferred above daily administration of drugs. Furthermore, drug delivery systems can be designed to deliver one or more drugs at a

Can tobacco dependence provide insights into other drug addictions?

Directory of Open Access Journals (Sweden)

Joseph R. DiFranza

2016-10-01

Full Text Available Abstract Within the field of addiction research, individuals tend to operate within silos of knowledge focused on specific drug classes. The discovery that tobacco dependence develops in a progression of stages and that the latency to the onset of withdrawal symptoms after the last use of tobacco changes over time have provided insights into how tobacco dependence develops that might be applied to the study of other drugs. As physical dependence on tobacco develops, it progresses through previously unrecognized clinical stages of wanting, craving and needing. The latency to withdrawal is a measure of the asymptomatic phase of withdrawal, extending from the last use of tobacco to the emergence of withdrawal symptoms. Symptomatic withdrawal is characterized by a wanting phase, a craving phase, and a needing phase. The intensity of the desire to smoke that is triggered by withdrawal correlates with brain activity in addiction circuits. With repeated tobacco use, the latency to withdrawal shrinks from as long as several weeks to as short as several minutes. The shortening of the asymptomatic phase of withdrawal drives an escalation of smoking, first in terms of the number of smoking days/month until daily smoking commences, then in terms of cigarettes smoked/day. The discoveries of the stages of physical dependence and the latency to withdrawal raises the question, does physical dependence develop in stages with other drugs? Is the latency to withdrawal for other substances measured in weeks at the onset of dependence? Does it shorten over time? The research methods that uncovered how tobacco dependence emerges might be fruitfully applied to the investigation of other addictions.

The perspectives of structurally vulnerable people who use drugs on volunteer stipends and work experiences provided through a drug user organization: Opportunities and limitations.

Science.gov (United States)

Bardwell, Geoff; Anderson, Solanna; Richardson, Lindsey; Bird, Lorna; Lampkin, Hugh; Small, Will; McNeil, Ryan

2018-03-01

While drug user organizations (DUO) have received public health attention as a means to potentially reduce the harms associated with drug use, there is a lack of research on the compensation and structural forces that promote or inhibit participation in DUO. Against the backdrop of structural vulnerability experienced by people who use drugs (PWUD), we examined the impact of monetary 'volunteer stipends' provided through a DUO and explore their role in providing low-threshold employment opportunities and shaping participation in DUO. Participants were purposively sampled to reflect a range of perspectives and experiences volunteering at Vancouver Area Network of Drug Users (VANDU) and receiving stipends. Semi-structured qualitative interviews were conducted with 23 members of VANDU. Interview transcripts were coded in Atlas.ti 7 for key a priori themes and emergent categories from the data and analyzed thematically. Stipends provided participants with symbolic and material recognition of the time, effort, and expertise they contribute to the organization, and functioned to facilitate ongoing participation. Payments that rewarded, skills, labour and drug-related knowledge reduced participant's perception of stigma against PWUD. Paid work in VANDU further provided participants with non-material benefits commonly attributed to regular employment, including social connections and a sense of purpose. Participants also identified the low level of pay as a limitation of VANDU's paid participation program. The daily demands of survival (accessing shelter, food, and drugs) posed more complex structural vulnerabilities to participate in VANDU, as small stipends were not sufficient to address these needs. Low threshold employment opportunities within DUO may provide significant individual and public health benefits. However, these benefits are constrained by the small size of stipends. Therefore, to ensure better inclusion of PWUD, our findings recommend the development and

High efficiency dry coating of non-subcoated pellets for sustained drug release formulations using amino methacrylate copolymers.

Science.gov (United States)

Klar, Fabian; Urbanetz, Nora Anne

2017-12-12

Dry coating utilizing a fluidized bed was evaluated in order to produce films with sustained drug release using amino methacrylate copolymers as film former. In contrast to other dry coating procedures using amino methacrylate copolymers, the described method enables an appropriate polymer adhesion by the selection of a plasticizer additive mixture in combination with the use of a three-way nozzle for simultaneous application. Well spreading fatty acid esters were found to increase the coating efficiency from 73% to approximately 86%, when they were used in conjunction with the plasticizer. Pellets were used as drug cores without previous treatment. After a curing step at 55 °C, the pellets exhibited a prolongation of the drug release over a period of about 6 h. Mainly the three parameters, coating level, composition of the polymers in the coating mixture, and the type of plasticizer, were found to exert distinct influence on the dissolution profile. Despite the differences in the coating procedure, the dissolution profiles of the coated pellets as well as the influencing parameters were similar to those known from conventional coating techniques.

Research on the comparison of the demethylvancomycin's diffusion-deposition characteristics in the ocular solid tissues of sustained subtenon drug delivery with subconjunctival injection.

Science.gov (United States)

Duan, Yi-Qin; Yang, Ye-Zhen; Huang, Xue-Tao; Lin, Ding

2017-11-01

To compare the demethylvancomycin's diffusion-deposition characteristics in the ocular solid tissues of sustained subtenon drug delivery with subconjunctival injection. Sixty adult white rabbits were randomly assigned to the subtenon drug delivery group and the subconjunctival injection group. The subtenon drug delivery group was continuously infused demethylvancomycin to the subtenon of rabbits. The subconjunctival injection group was injected demethylvancomycin to the subconjunctival of rabbits. Cornea, iris and sclera were collected for high-performance liquid chromatography analyses to determine drug concentrations at one hour, three hours, six hours, 12 h and 24 h of drug administration. WinNonlin 6.3 was used to calculate the parameters of cumulative area under the curve (AUC cum ) of demethylvancomycin. The peak levels of demethylvancomycin concentration of the subtenon drug delivery group and the subconjunctival injection group were 92.406 ± 21.555 and 51.778 ± 14.001 μg/g in cornea, 28.451 ± 10.229 μg/g and 42.271 ± 27.291 μg/g in iris, 153.166 ± 51.738 μg/g and 57.423 ± 18.480 μg/g in sclera. The differences of concentrations between the two groups in cornea and sclera were statistically significant (F = 487.775, p drug delivery group and the subconjunctival injection group was 1808.23 h * μg/g and 273.73 h * μg/g in cornea, 489.12 h * μg/g and 216.16 h * μg/g in iris and 2166.34 h * μg/g and 392.57 h * μg/g in sclera at 24 h of drug administration. The sustained subtenon drug delivery had a better drug permeability and accumulation in the intraocular solid tissue compared to subconjunctival injection, which demonstrated it was probably a promising and effective approach for treating posterior segment diseases and endophthalmitis.

Assessing sustainable remediation frameworks using sustainability principles.

Science.gov (United States)

Ridsdale, D Reanne; Noble, Bram F

2016-12-15

The remediation industry has grown exponentially in recent decades. International organizations of practitioners and remediation experts have developed several frameworks for integrating sustainability into remediation projects; however, there has been limited attention to how sustainability is approached and operationalized in sustainable remediation frameworks and practices - or whether sustainability plays any meaningful role at all in sustainable remediation. This paper examines how sustainability is represented in remediation frameworks and the guidance provided for practical application. Seven broad sustainability principles and review criteria are proposed and applied to a sample of six international remediation frameworks. Not all review criteria were equally satisfied and none of the frameworks fully met all criteria; however, the best performing frameworks were those identified as sustainability remediation frameworks. Intra-generational equity was addressed by all frameworks. Integrating social, economic and biophysical components beyond triple-bottom-line indicators was explicitly addressed only by the sustainable remediation frameworks. No frameworks provided principle- or rule-based guidance for dealing with trade-offs in sustainability decisions. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Clinical significance of drug resistance-associated mutations in treatment of hepatitis C with direct-acting antiviral agents].

Science.gov (United States)

Li, Z; Chen, Z W; Ren, H; Hu, P

2017-03-20

Direct-acting antiviral agents (DAAs) achieve a high sustained virologic response rate in the treatment of chronic hepatitis C virus infection. However, drug resistance-associated mutations play an important role in treatment failure and have attracted more and more attention. This article elaborates on the clinical significance of drug resistance-associated mutations from the aspects of their definition, association with genotype, known drug resistance-associated mutations and their prevalence rates, the impact of drug resistance-associated mutations on treatment naive and treatment-experienced patients, and the role of clinical detection, in order to provide a reference for clinical regimens with DAAs and help to achieve higher sustained virologic response rates.

DEVELOPMENT OF SUSTAINED RELEASE TABLETS CONTAINING SOLID DISPERSIONS OF BACLOFEN

Directory of Open Access Journals (Sweden)

K. H. Janardhana

2015-07-01

Full Text Available Sustained release tablets containing solid dispersions granules of a poorly water soluble drug were prepared to investigate the controlled release of the drug. Baclofen was chosen because of its poor water solubility and short elimination half-life. Poloxamer 188 and PEG 6000 were used as solid dispersion carrier. Free flowing solid dispersion granules were prepared by adsorbing the melt of the drug and carriers onto the surface of an adsorbent, Carbopol 934P followed by direct compression with HPMC K4M and HPMC K100 to obtain an solid dispersion loaded sustained release tablets. FTIR studies confirmed that the compatibility of drug and carriers. Differential scanning calorimetry (DSC and X-ray diffraction (XRD revealed partially amorphous structures of the drug in solid dispersion granules. The solid dispersion granules dissolved completely within 30 min, which was much faster than that of pure drug baclofen. The sustained release of baclofen from the solid dispersion containing tablet was achieved for 2 h in gastric fluid (pH 1.2 and for up to 10 h in intestinal fluid (pH 6.8. A combination of solid dispersion techniques using adsorption and sustained release concepts is a promising approach to control the release rate of poorly water-soluble drugs.

DEVELOPMENT OF SUSTAINED RELEASE TABLETS CONTAINING SOLID DISPERSIONS OF BACLOFEN

Directory of Open Access Journals (Sweden)

K. H. Janardhana

2013-12-01

Full Text Available Sustained release tablets containing solid dispersions granules of a poorly water soluble drug were prepared to investigate the controlled release of the drug. Baclofen was chosen because of its poor water solubility and short elimination half-life. Poloxamer 188 and PEG 6000 were used as solid dispersion carrier. Free flowing solid dispersion granules were prepared by adsorbing the melt of the drug and carriers onto the surface of an adsorbent, Carbopol 934P followed by direct compression with HPMC K4M and HPMC K100 to obtain an solid dispersion loaded sustained release tablets. FTIR studies confirmed that the compatibility of drug and carriers. Differential scanning calorimetry (DSC and X-ray diffraction (XRD revealed partially amorphous structures of the drug in solid dispersion granules. The solid dispersion granules dissolved completely within 30 min, which was much faster than that of pure drug baclofen. The sustained release of baclofen from the solid dispersion containing tablet was achieved for 2 h in gastric fluid (pH 1.2 and for up to 10 h in intestinal fluid (pH 6.8. A combination of solid dispersion techniques using adsorption and sustained release concepts is a promising approach to control the release rate of poorly water-soluble drugs.

Coaxial Electrospinning with Mixed Solvents: From Flat to Round Eudragit L100 Nanofibers for Better Colon-Targeted Sustained Drug Release Profiles

Directory of Open Access Journals (Sweden)

Deng-Guang Yu

2014-01-01

Full Text Available A modified coaxial electrospinning process was developed for creating drug-loaded composite nanofibers. Using a mixed solvent of ethanol and N,N-dimethylacetamide as a sheath fluid, the electrospinning of a codissolving solution of diclofenac sodium (DS and Eudragit L100 (EL100 could run smoothly and continuously without any clogging. A series of analyses were undertaken to characterize the resultant nanofibers from both the modified coaxial process and a one-fluid electrospinning in terms of their morphology, physical form of the components, and their functional performance. Compared with those from the one-fluid electrospinning, the DS-loaded EL100 fibers from the modified coaxial process were rounder and smoother and possessed higher quality in terms of diameter and distribution with the DS existing in the EL100 matrix in an amorphous state; they also provided a better colon-targeted sustained drug release profile with a longer release time period. The modified coaxial process not only can smooth the electrospinning process to prevent clogging of spinneret, but also is a useful tool to tailor the shape of electrospun nanofibers and thus endow them improved functions.

Smart Drug Delivery Systems in Cancer Therapy.

Science.gov (United States)

Unsoy, Gozde; Gunduz, Ufuk

2018-02-08

Smart nanocarriers have been designed for tissue-specific targeted drug delivery, sustained or triggered drug release and co-delivery of synergistic drug combinations to develop safer and more efficient therapeutics. Advances in drug delivery systems provide reduced side effects, longer circulation half-life and improved pharmacokinetics. Smart drug delivery systems have been achieved successfully in the case of cancer. These nanocarriers can serve as an intelligent system by considering the differences of tumor microenvironment from healthy tissue, such as low pH, low oxygen level, or high enzymatic activity of matrix metalloproteinases. The performance of anti-cancer agents used in cancer diagnosis and therapy is improved by enhanced cellular internalization of smart nanocarriers and controlled drug release. Here, we review targeting, cellular internalization; controlled drug release and toxicity of smart drug delivery systems. We are also emphasizing the stimulus responsive controlled drug release from smart nanocarriers. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Biodegradable polymeric nanocarriers for pulmonary drug delivery.

Science.gov (United States)

Rytting, Erik; Nguyen, Juliane; Wang, Xiaoying; Kissel, Thomas

2008-06-01

Pulmonary drug delivery is attractive for both local and systemic drug delivery as a non-invasive route that provides a large surface area, thin epithelial barrier, high blood flow and the avoidance of first-pass metabolism. Nanoparticles can be designed to have several advantages for controlled and targeted drug delivery, including controlled deposition, sustained release, reduced dosing frequency, as well as an appropriate size for avoiding alveolar macrophage clearance or promoting transepithelial transport. This review focuses on the development and application of biodegradable polymers to nanocarrier-based strategies for the delivery of drugs, peptides, proteins, genes, siRNA and vaccines by the pulmonary route. The selection of natural or synthetic materials is important in designing particles or nanoparticle clusters with the desired characteristics, such as biocompatibility, size, charge, drug release and polymer degradation rate.

48 CFR 970.2301 - Sustainable acquisition.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Sustainable acquisition. 970.2301 Section 970.2301 Federal Acquisition Regulations System DEPARTMENT OF ENERGY AGENCY..., Renewable Energy Technologies, Occupational Safety and Drug-Free Work Place 970.2301 Sustainable acquisition...

Design and in vitro/in vivo evaluation of sustained-release floating tablets of itopride hydrochloride

Directory of Open Access Journals (Sweden)

Ahmed SM

2016-12-01

Full Text Available Sayed M Ahmed,1 Adel Ahmed Ali,2 Ahmed MA Ali,2,3 Omiya A Hassan2,4 1Department of Industrial Pharmacy, Faculty of Pharmacy, Assiut University, Assiut, 2Department of Pharmaceutics, Faculty of Pharmacy, Beni-Suef University, Beni-Suef, Egypt; 3Department of Pharmaceutics, Faculty of Pharmacy, Taif University, Taif, Kingdom of Saudi Arabia; 4Department of Pharmaceutics, Faculty of Pharmacy, Deraya University, El-Minia Gadida, Egypt Purpose: The aim of the present study was to improve the bioavailability of itopride (ITO and sustain its action by formulating as a floating dosage form. Materials and methods: Sustained-release floating tablets of ITO hydrochloride (HCl were prepared by direct compression using different hydrocolloid polymers such as hydroxypropyl methylcellulose and ethylcellulose and/or methacrylic acid polymers Eudragit RSPM and Carbopol 934P. The floating property was achieved using an effervescent mixture of sodium bicarbonate and anhydrous citric acid (1:1 mol/mol. Hardness, friability, content uniformity, and dissolution rate of the prepared floating tablets were evaluated. The formulation F10 composed of 28.5% Eudragit RSPM, 3% NaHCO3, and 7% citric acid provided sustained drug release. Results: In vitro results showed sustained release of F10 where the drug release percentage was 96.51%±1.75% after 24 hours (P=0.031.The pharmacokinetic results indicated that the area under the curve (AUC0–∞ of the prepared sustained-release floating tablets at infinity achieved 93.69 µg·h/mL compared to 49.89 µg·h/mL for the reference formulation (Ganaton® and the relative bioavailability of the sustained-release formulation F10 increased to 187.80% (P=0.022. Conclusion: The prepared floating tablets of ITO HCl (F10 could be a promising drug delivery system with sustained-release action and enhanced drug bioavailability. Keywords: itopride HCl, oral drug delivery, stability study, bioavailability

Protein instability and immunogenicity: roadblocks to clinical application of injectable protein delivery systems for sustained release.

Science.gov (United States)

Jiskoot, Wim; Randolph, Theodore W; Volkin, David B; Middaugh, C Russell; Schöneich, Christian; Winter, Gerhard; Friess, Wolfgang; Crommelin, Daan J A; Carpenter, John F

2012-03-01

Protein instability and immunogenicity are two main roadblocks to the clinical success of novel protein drug delivery systems. In this commentary, we discuss the need for more extensive analytical characterization in relation to concerns about protein instability in injectable drug delivery systems for sustained release. We then will briefly address immunogenicity concerns and outline current best practices for using state-of-the-art analytical assays to monitor protein stability for both conventional and novel therapeutic protein dosage forms. Next, we provide a summary of the stresses on proteins arising during preparation of drug delivery systems and subsequent in vivo release. We note the challenges and difficulties in achieving the absolute requirement of quantitatively assessing the degradation of protein molecules in a drug delivery system. We describe the potential roles for academic research in further improving protein stability and developing new analytical technologies to detect protein degradation byproducts in novel drug delivery systems. Finally, we provide recommendations for the appropriate approaches to formulation design and assay development to ensure that stable, minimally immunogenic formulations of therapeutic proteins are created. These approaches should help to increase the probability that novel drug delivery systems for sustained protein release will become more readily available as effective therapeutic agents to treat and benefit patients. Copyright © 2011 Wiley Periodicals, Inc.

Micro- and Nano-Carrier Mediated Intra-Articular Drug Delivery Systems for the Treatment of Osteoarthritis

Directory of Open Access Journals (Sweden)

Zhiyue Zhang

2012-01-01

Full Text Available The objective of this paper is to provide readers with current developments of intra-articular drug delivery systems. In recent years, although the search for a clinically successful ideal carrier is ongoing, sustained-release systems, such as polymeric micro- and nanoparticles, liposomes, and hydrogels, are being extensively studied for intra-articular drug delivery purposes. The advantages associated with long-acting preparations include a longer effect of the drug in the action site and a reduced risk of infection due to numerous injections consequently. This paper discusses the recent developments in the field of intra-articular sustained-release delivery systems for the treatment of osteoarthritis.

Micro- and Nano-Carrier Mediated Intra-Articular Drug Delivery Systems for the Treatment of Osteoarthritis

International Nuclear Information System (INIS)

Zhang, Z.; Huang, G.

2012-01-01

The objective of this paper is to provide readers with current developments of intra-articular drug delivery systems. In recent years, although the search for a clinically successful ideal carrier is ongoing, sustained-release systems, such as polymeric micro- and nanoparticles, liposomes, and hydrogels, are being extensively studied for intra-articular drug delivery purposes. The advantages associated with long-acting preparations include a longer effect of the drug in the action site and a reduced risk of infection due to numerous injections consequently. This paper discusses the recent developments in the field of intra-articular sustained-release delivery systems for the treatment of osteoarthritis

Association between change of health care providers and pregnancy exposure to FDA category C, D and X drugs.

Science.gov (United States)

Yang, Jianzhou; Xie, Rihua; Krewski, Daniel; Wang, Yongjin; Walker, Mark; Cao, Wenjun; Wen, Shi Wu

2014-01-01

Changing health care providers frequently breaks the continuity of care, which is associated with many health care problems. The purpose of this study was to examine the association between a change of health care providers and pregnancy exposure to FDA category C, D and X drugs. A 50% random sample of women who gave a birth in Saskatchewan between January 1, 1997 and December 31, 2000 were chosen for this study. The association between the number of changes in health care providers and with pregnancy exposure to category C, D, and X drugs for those women with and without chronic diseases were evaluated using multiple logistical regression, with adjusted odds ratios (ORs) and its 95% confidence intervals (CIs) as the association measures. A total of 18 568 women were included in this study. Rates of FDA C, D, and X drug uses were 14.35%, 17.07%, 21.72%, and 31.14%, in women with no change of provider, 1-2 changes, 3-5 changes, and more than 5 changes of health care providers. An association between the number of changes of health care providers and pregnancy exposure to FDA C, D, and X drugs existed in women without chronic diseases but not in women with chronic disease. Change of health care providers is associated with pregnancy exposure to FDA category C, D and X drugs in women without chronic diseases.

Towards the just and sustainable use of antibiotics.

Science.gov (United States)

Merrett, Gemma L Buckland; Bloom, Gerald; Wilkinson, Annie; MacGregor, Hayley

2016-01-01

The emergence and spread of antibiotic resistant pathogens poses a big challenge to policy-makers, who need to oversee the transformation of health systems that evolved to provide easy access to these drugs into ones that encourage appropriate use of antimicrobials, whilst reducing the risk of resistance. This is a particular challenge for low and middle-income countries with pluralistic health systems where antibiotics are available in a number of different markets. This review paper considers access and use of antibiotics in these countries from a complex adaptive system perspective. It highlights the main areas of intervention that could provide the key to addressing the sustainable long term use and availability of antibiotics. A focus on the synergies between interventions addressing access strategies, antibiotic quality, diagnostics for low-resource settings, measures to encourage just and sustainable decision making and help seeking optimal therapeutic and dosing strategies are key levers for the sustainable future of antibiotic use. Successful integration of such strategies will be dependent on effective governance mechanisms, effective partnerships and coalition building and accurate evaluation systems at national, regional and global levels.

Promotion of Prescription Drugs to Consumers and Providers, 2001–2010

Science.gov (United States)

Kornfield, Rachel; Donohue, Julie; Berndt, Ernst R.; Alexander, G. Caleb

2013-01-01

Background Pharmaceutical firms heavily promote their products and may have changed marketing strategies in response to reductions in new product approvals, restrictions on some forms of promotion, and the expanding role of biologic therapies. Methods We used descriptive analyses of annual cross-sectional data from 2001 through 2010 to examine direct-to-consumer advertising (DTCA) (Kantar Media) and provider-targeted promotion (IMS Health and SDI), including: (1) inflation-adjusted total promotion spending ($ and percent of sales); (2) distribution by channel (consumer v. provider); and (3) provider specialty both for the industry as a whole and for top-selling biologic and small molecule therapies. Results Total promotion peaked in 2004 at US$36.1 billion (13.4% of sales). By 2010 it had declined to $27.7B (9.0% of sales). Between 2006 and 2010, similar declines were seen for promotion to providers and DTCA (both by 25%). DTCA’s share of total promotion increased from 12% in 2002 to 18% in 2006, but then declined to 16% and remains highly concentrated. Number of products promoted to providers peaked in 2004 at over 3000, and then declined 20% by 2010. In contrast to top-selling small molecule therapies having an average of $370 million (8.8% of sales) spent on promotion, top biologics were promoted less, with only $33 million (1.4% of sales) spent per product. Little change occurred in the composition of promotion between primary care physicians and specialists from 2001–2010. Conclusions These findings suggest that pharmaceutical companies have reduced promotion following changes in the pharmaceutical pipeline and patent expiry for several blockbuster drugs. Promotional strategies for biologic drugs differ substantially from small molecule therapies. PMID:23469165

Studies on the toxic effects of periodontal sustained release drug containing ornidazole and pefloxacin mesylate on early embryonic development of SD rat

Directory of Open Access Journals (Sweden)

Zheng-mou DONG

2011-01-01

Full Text Available Objective To evaluate the toxic effects of periodontal sustained release drug containing ornidazole and pefloxacin mesylate on early embryonic development of SD rats.Methods A total of 100female SD rats were randomly divided into negative control,low-,medium-,high-dose group and intervention group(20each.Rats in low-,medium-and high-dose group were fed daily with the sustained release drug at 1,4,and 8g/kg respectively;those in negative control group were fed daily with distilled water from the 14th day before mating to the 7th day of pregnancy continuously,and those in intervention group received cyclophosphamide(40mg/kgby intraperitoneal injection for 5successive days.During this period,the general status,mating,pregnancy,coefficient of ovary and uterus,the numbers of corpus luteum,nidation,live births,stillbirths,absorbed embryo,prenidatory and postnidatory mortality,serum testosterone(Tand estradiol(E2were determined respectively.Histopathologic examination of the ovary and uterus,immunohistochemical observation of ovaries for proliferating cell nuclear antigen(PCNAand Bcl-2associated X protein(Baxwere also performed respectively.Results The general status of those rats was good except one in the low-dose group and one in the intervention group died on the 14th day of administration,and one in negative control and one in high dose group died on the 5th day of pregnancy,respectively.The body weight of animals decreased significantly(P 0.05.The serum T level in medium-and high-dose group and the E2level in high-dose group declined compared to that in negative control group(P < 0.05.Conclusions Although the periodontal sustained release drug containing ornidazole and pefloxacin mesylate shows no toxicity to the early embryonic development of SD rats,the high dose drug has certain toxicity to ovary.Declined serum concentrations of T and E2,reduced expression of PCNA,and increased Bax may be the causes of the toxicity.

Nanocrystal: a novel approach to overcome skin barriers for improved topical drug delivery.

Science.gov (United States)

Patel, Viral; Sharma, Om Prakash; Mehta, Tejal

2018-04-01

Skin is an important route of drug delivery for the treatment of various dermatological conditions. The advent of nanotechnology is paving the roadmaps for topical drug delivery by providing sustained release as well as maintaining a localized effect, outweighing the toxicity concern. Area covered: This review highlighted the morphology of skin, its barrier nature as well as drug penetration pathways after topical application of formulations. The existing methods to improve topical drug delivery, by infringing or permeating the skin barriers, are discussed. This context concretes the foundation to accentuate the need for the development of nanocrystal-based topical formulation. The mechanism of drug release, immediate as well as sustained release, after topical administration of drug nanocrystals is also elaborated. The special emphasis is given on the breakthrough achieved, in topical drug delivery using drug nanocrystals, so far in the plethora of literature, patents, and products, under clinical trial as well as in the market. Expert opinion: The current research on nanocrystals for topical drug delivery is highlighting the breakthroughs achieved so far. The output of these research envisages that topical nanocrystals based formulations can be a novel strategy for the drugs which are facing solubility, bioavailability and toxicity concerns.

42 CFR 423.464 - Coordination of benefits with other providers of prescription drug coverage.

Science.gov (United States)

2010-10-01

... fees. CMS may impose user fees on Part D plans for the transmittal of information necessary for benefit...) Provides supplemental drug coverage to individuals based on financial need, age, or medical condition, and... effective exchange of information and coordination between such plan and SPAPs and entities providing other...

Biomaterials for Local, Controlled Drug Delivery to the Injured Spinal Cord

Directory of Open Access Journals (Sweden)

Alexis M. Ziemba

2017-05-01

Full Text Available Affecting approximately 17,000 new people each year, spinal cord injury (SCI is a devastating injury that leads to permanent paraplegia or tetraplegia. Current pharmacological approaches are limited in their ability to ameliorate this injury pathophysiology, as many are not delivered locally, for a sustained duration, or at the correct injury time point. With this review, we aim to communicate the importance of combinatorial biomaterial and pharmacological approaches that target certain aspects of the dynamically changing pathophysiology of SCI. After reviewing the pathophysiology timeline, we present experimental biomaterial approaches to provide local sustained doses of drug. In this review, we present studies using a variety of biomaterials, including hydrogels, particles, and fibers/conduits for drug delivery. Subsequently, we discuss how each may be manipulated to optimize drug release during a specific time frame following SCI. Developing polymer biomaterials that can effectively release drug to target specific aspects of SCI pathophysiology will result in more efficacious approaches leading to better regeneration and recovery following SCI.

Development of diclofenac sodium loaded magnetic nanocarriers of pectin interacted with chitosan for targeted and sustained drug delivery.

Science.gov (United States)

Dutta, Raj Kumar; Sahu, Saurabh

2012-09-01

A novel spherical magnetic nanocarrier of 100-150 nm dimensions made of pectin interacted with chitosan (MPCh-DS0.05) resulted in 99.5% encapsulation efficiency of diclofenac sodium (DS) as a model drug. Similarly, magnetic nanocarrier made of only pectin crosslinked with Ca(2+) (MPDS-0.05) resulted in only 60.6% encapsulation efficiency of DS. The increase in drug encapsulation efficiency (%) in MPCh-DS0.05 batch was due to synergistic drug encapsulation properties of pectin and chitosan. The structural and morphological features of these magnetic nanocarriers were studied by X-ray diffractometry (XRD), Fourier transform infrared-spectrometry (FT-IR), thermogravimetry, electron microscopy and dynamic light scattering (DLS) measurements. The magnetic properties were measured by vibrating sample magnetometer (VSM) and superconducting quantum unit interference device measurements (SQUID). The in vitro drug release was pH sensitive and exhibited sustained release sequentially in simulated gastric fluid (negligible release in 0-2h), simulated intestinal fluid (~69% release in 2-5h), simulated colonic fluid (5-60 h) and also in phosphate buffer at pH 7.4 (0-48 h). The drug release profile in phosphate buffer solution at pH 7.4 was in good agreement with swelling controlled mechanism on the basis of Korsemeyer-Peppas model. Copyright © 2012 Elsevier B.V. All rights reserved.

[The patents game. Generic and biosimilar drugs].

Science.gov (United States)

Villamañán, E; González, D; Armada, E; Ruano, M; Álvarez-Sala, R; Herrero, A

2016-01-01

The protection provided by patents on medicines has a limited duration. The expiry of patents expiration allows copies of the drugs to be released, competing with original. At first, they were identical to the original, known as generic drugs, but in recent years, due to the marketing of biological therapies and the expiry of many of their patents, biosimilar drugs have also emerged. These are not exact copies of the original, but, like generic drugs, biosimilar drugs have to demonstrate equivalence to the reference drugs in quality, safety and efficacy. Nevertheless, despite their importance and contribution to sustainability of health system, doctors are sometimes unaware of differences between them, and their impact in terms of clinical and economic effects. An attempt is made to review and clarify certain aspects often unknown by physicians, despite their involvement in their use. Copyright © 2015 SECA. Published by Elsevier Espana. All rights reserved.

Liver cancer cells: targeting and prolonged-release drug carriers consisting of mesoporous silica nanoparticles and alginate microspheres.

Science.gov (United States)

Liao, Yu-Te; Liu, Chia-Hung; Yu, Jiashing; Wu, Kevin C-W

2014-01-01

A new microsphere consisting of inorganic mesoporous silica nanoparticles (MSNs) and organic alginate (denoted as MSN@Alg) was successfully synthesized by air-dynamic atomization and applied to the intracellular drug delivery systems (DDS) of liver cancer cells with sustained release and specific targeting properties. MSN@Alg microspheres have the advantages of MSN and alginate, where MSN provides a large surface area for high drug loading and alginate provides excellent biocompatibility and COOH functionality for specific targeting. Rhodamine 6G was used as a model drug, and the sustained release behavior of the rhodamine 6G-loaded MSN@Alg microspheres can be prolonged up to 20 days. For targeting therapy, the anticancer drug doxorubicin was loaded into MSN@Alg microspheres, and the (lysine)4-tyrosine-arginine-glycine-aspartic acid (K4YRGD) peptide was functionalized onto the surface of MSN@Alg for targeting liver cancer cells, hepatocellular carcinoma (HepG2). The results of the 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide (MTT) assay and confocal laser scanning microscopy indicate that the MSN@Alg microspheres were successfully uptaken by HepG2 without apparent cytotoxicity. In addition, the intracellular drug delivery efficiency was greatly enhanced (ie, 3.5-fold) for the arginine-glycine-aspartic acid (RGD)-labeled, doxorubicin-loaded MSN@Alg drug delivery system compared with the non-RGD case. The synthesized MSN@Alg microspheres show great potential as drug vehicles with high biocompatibility, sustained release, and targeting features for future intracellular DDS.

Drug Revolving Fund-Based

African Journals Online (AJOL)

Background: The Drug Revolving Fund (DRF) was instituted in 1996 in Oyo State to ensure sustainable drug availability at primary health care level with a seed stock of drugs supplied by the Petroleum Trust Fund. This was discontinued in 1999 and replaced in January 2000, with free health service, which involves ...

ICT-Platform to Transform Car Dealerships to Regional Providers of Sustainable Mobility Services

Directory of Open Access Journals (Sweden)

Benjamin Wagner vom Berg

2017-02-01

Full Text Available Aim/Purpose: The topic of this study is the ICT-enabled transformation of car dealerships to regional providers of sustainable mobility (e.g., car sharing. Background: Car dealerships offer specific conditions that enable a sustainable mobility offer, based on individual motorized transport like car sharing. This is especially useful in small towns or rural areas where people’s mobility is strongly dominated by private cars, and public transport coverage is limited. However, these new mobility services are combined services with the need of a deep integration of information systems, and these services are not yet related to car dealerships and customer acquisition has to be supported. Methodology: An empirical study with an inductive approach was chosen. The study consists of interviews with three focus groups of different stakeholders of car dealerships. Within the frame of the research project, “ReCaB – Regional Car-Balancing” a qualitative research approach was chosen. Within a design science approach the existing SusCRM architecture was adapted based on the elaborated requirements. Contribution: A software architecture is proposed, where Customer Relationship Management (CRM components to market new sustainable mobility offers are vital parts and existing information systems of car dealerships are integrated. Findings: The basic feasibility of the establishment and customer acceptance has been demonstrated, at least in the area of car sharing within ReCaB. The execution in the car sharing field has already started and a number of car dealerships are already bringing their own offers to market. Major findings for the SusCRM architecture have been elaborated in a design science approach in the national German research project “Showcase for electro mobility”. Recommendations for Practitioners: There is still no fully functional prototype developed for this specific use case and evaluated in the car dealership environment. An

Formulation of a poorly water-soluble drug in sustained-release hollow granules with a high viscosity water-soluble polymer using a fluidized bed rotor granulator.

Science.gov (United States)

Asada, Takumi; Yoshihara, Naoki; Ochiai, Yasushi; Kimura, Shin-Ichiro; Iwao, Yasunori; Itai, Shigeru

2018-04-25

Water-soluble polymers with high viscosity are frequently used in the design of sustained-release formulations of poorly water-soluble drugs to enable complete release of the drug in the gastrointestinal tract. Tablets containing matrix granules with a water-soluble polymer are preferred because tablets are easier to handle and the multiple drug-release units of the matrix granules decreases the influences of the physiological environment on the drug. However, matrix granules with a particle size of over 800 μm sometimes cause a content uniformity problem in the tableting process because of the large particle size. An effective method of manufacturing controlled-release matrix granules with a smaller particle size is desired. The aim of this study was to develop tablets containing matrix granules with a smaller size and good controlled-release properties, using phenytoin as a model poorly water-soluble drug. We adapted the recently developed hollow spherical granule granulation technology, using water-soluble polymers with different viscosities. The prepared granules had an average particle size of 300 μm and sharp particle size distribution (relative width: 0.52-0.64). The values for the particle strength of the granules were 1.86-1.97 N/mm 2 , and the dissolution profiles of the granules were not affected by the tableting process. The dissolution profiles and the blood concentration levels of drug released from the granules depended on the viscosity of the polymer contained in the granules. We succeeded in developing the desired controlled-release granules, and this study should be valuable in the development of sustained-release formulations of poorly water-soluble drugs. Copyright © 2018 Elsevier B.V. All rights reserved.

Providing an address for delivery of nanoencapsulated TB drugs

CSIR Research Space (South Africa)

Lemmer, Yolandy

2010-06-01

Full Text Available compliance and drug resistance pose a great challenge to TB treatment programs worldwide. To improve the current inadequate therapeutic management of TB, a polymeric anti-TB nanodrug delivery system, for anti-TB drugs, was developed that could enable entry...

Natural polymers, gums and mucilages as excipients in drug delivery.

Science.gov (United States)

Kumar, Shobhit; Gupta, Satish Kumar

2012-01-01

Use of natural polymers, gums and mucilages in drug delivery systems has been weighed down by the synthetic materials. Natural based excipients offered advantages such as non-toxicity, less cost and abundantly availablity. Aqueous solubility of natural excipients plays an important role in their selection for designing immediate, controlled or sustained release formulations. This review article provide an overview of natural gum, polymers and mucilages as excipients in dosage forms as well as novel drug delivery systems.

Combination of adsorption by porous CaCO3 microparticles and encapsulation by polyelectrolyte multilayer films for sustained drug delivery.

Science.gov (United States)

Wang, Chaoyang; He, Chengyi; Tong, Zhen; Liu, Xinxing; Ren, Biye; Zeng, Fang

2006-02-03

Combination of adsorption by porous CaCO(3) microparticles and encapsulation by polyelectrolyte multilayers via the layer-by-layer (LbL) self-assembly was proposed for sustained drug release. Firstly, porous calcium carbonate microparticles with an average diameter of 5 microm were prepared for loading a model drug, ibuprofen (IBU). Adsorption of IBU into the pores was characterized by ultraviolet (UV), infrared (IR), thermogravimetric analysis (TGA), Brunauer-Emmett-Teller (BET) experiment and X-ray diffraction (XRD). The adsorbed IBU amount Gamma was 45.1mg/g for one-time adsorption and increased with increasing adsorption times. Finally, multilayer films of protamine sulfate (PRO) and sodium poly(styrene sulfonate) (PSS) were formed on the IBU-loaded CaCO(3) microparticles by the layer-by-layer self-assembly. Amorphous IBU loaded in the pores of the CaCO(3) microparticles had a rapider release in the gastric fluid and a slower release in the intestinal fluid, compared with the bare IBU crystals. Polyelectrolyte multilayers assembled on the drug-loaded particles by the LbL reduced the release rate in both fluids. In this work, polymer/inorganic hybrid core-shell microcapsules were fabricated for controlled release of poorly water-soluble drugs. The porous inorganic particles are useful to load drugs in amorphous state and the polyelectrolyte multilayer films coated on the particle assuage the initial burst release.

Intracranial drug delivery for subarachnoid hemorrhage.

Science.gov (United States)

Macdonald, Robert Loch; Leung, Ming; Tice, Tom

2012-01-01

Tice and colleagues pioneered site-specific, sustained-release drug delivery to the brain almost 30 years ago. Currently there is one drug approved for use in this manner. Clinical trials in subarachnoid hemorrhage have led to approval of nimodipine for oral and intravenous use, but other drugs, such as clazosentan, hydroxymethylglutaryl CoA reductase inhibitors (statins) and magnesium, have not shown consistent clinical efficacy. We propose that intracranial delivery of drugs such as nimodipine, formulated in sustained-release preparations, are good candidates for improving outcome after subarachnoid hemorrhage because they can be administered to patients that are already undergoing surgery and who have a self-limited condition from which full recovery is possible.

Nurses' perception of the quality of care they provide to hospitalized drug addicts: testing the theory of reasoned action.

Science.gov (United States)

Natan, Merav Ben; Beyil, Valery; Neta, Okev

2009-12-01

A correlational design was used to examine nursing staff attitudes and subjective norms manifested in intended and actual care of drug users based on the Theory of Reasoned Action. One hundred and thirty-five nursing staff from three central Israeli hospitals completed a questionnaire examining theory-based variables as well as sociodemographic and professional characteristics. Most respondents reported a high to very high level of actual or intended care of drug users. Nurses' stronger intentions to provide quality care to drug users were associated with more positive attitudes. Nursing staff members had moderately negative attitudes towards drug users. Nurses were found to hold negative stereotypes of drug addict patients and most considered the management of this group difficult. Positive attitudes towards drug users, perceived expectations of others and perceived correctness of the behaviour are important in their effect on the intention of nurses to provide high-quality care to hospitalized patients addicted to drugs.

Organic synthesis provides opportunities to transform drug discovery

Science.gov (United States)

Blakemore, David C.; Castro, Luis; Churcher, Ian; Rees, David C.; Thomas, Andrew W.; Wilson, David M.; Wood, Anthony

2018-03-01

Despite decades of ground-breaking research in academia, organic synthesis is still a rate-limiting factor in drug-discovery projects. Here we present some current challenges in synthetic organic chemistry from the perspective of the pharmaceutical industry and highlight problematic steps that, if overcome, would find extensive application in the discovery of transformational medicines. Significant synthesis challenges arise from the fact that drug molecules typically contain amines and N-heterocycles, as well as unprotected polar groups. There is also a need for new reactions that enable non-traditional disconnections, more C-H bond activation and late-stage functionalization, as well as stereoselectively substituted aliphatic heterocyclic ring synthesis, C-X or C-C bond formation. We also emphasize that syntheses compatible with biomacromolecules will find increasing use, while new technologies such as machine-assisted approaches and artificial intelligence for synthesis planning have the potential to dramatically accelerate the drug-discovery process. We believe that increasing collaboration between academic and industrial chemists is crucial to address the challenges outlined here.

Fabrication and characterization of a rapid prototyped tissue engineering scaffold with embedded multicomponent matrix for controlled drug release

Science.gov (United States)

Chen, Muwan; Le, Dang QS; Hein, San; Li, Pengcheng; Nygaard, Jens V; Kassem, Moustapha; Kjems, Jørgen; Besenbacher, Flemming; Bünger, Cody

2012-01-01

Bone tissue engineering implants with sustained local drug delivery provide an opportunity for better postoperative care for bone tumor patients because these implants offer sustained drug release at the tumor site and reduce systemic side effects. A rapid prototyped macroporous polycaprolactone scaffold was embedded with a porous matrix composed of chitosan, nanoclay, and β-tricalcium phosphate by freeze-drying. This composite scaffold was evaluated on its ability to deliver an anthracycline antibiotic and to promote formation of mineralized matrix in vitro. Scanning electronic microscopy, confocal imaging, and DNA quantification confirmed that immortalized human bone marrow-derived mesenchymal stem cells (hMSC-TERT) cultured in the scaffold showed high cell viability and growth, and good cell infiltration to the pores of the scaffold. Alkaline phosphatase activity and osteocalcin staining showed that the scaffold was osteoinductive. The drug-release kinetics was investigated by loading doxorubicin into the scaffold. The scaffolds comprising nanoclay released up to 45% of the drug for up to 2 months, while the scaffold without nanoclay released 95% of the drug within 4 days. Therefore, this scaffold can fulfill the requirements for both bone tissue engineering and local sustained release of an anticancer drug in vitro. These results suggest that the scaffold can be used clinically in reconstructive surgery after bone tumor resection. Moreover, by changing the composition and amount of individual components, the scaffold can find application in other tissue engineering areas that need local sustained release of drug. PMID:22904634

Iontophoresis on minoxidil sulphate-loaded chitosan nanoparticles accelerates drug release, decreasing their targeting effect to hair follicles

Directory of Open Access Journals (Sweden)

Breno N. Matos

Full Text Available The experiments described in this paper tested the hypothesis whether iontophoresis applied on a chitosan nanoparticle formulation could combine the enhanced drug accumulation into the follicular casts obtained using iontophoresis and the sustained drug release, reducing dermal exposure, provided by nanoparticles. Results showed that even though iontophoresis presented comparable minoxidil targeting potential to hair follicles than passive delivery of chitosan-nanoparticles (4.1 ± 0.9 and 5.3 ± 1.0 µg cm-2, respectively, it was less effective on preventing dermal exposure, since chitosan-nanoparticles presented a drug permeation in the receptor solution of 15.3 ± 4.3 µg cm-2 after 6 h of iontophoresis, while drug amounts from passive nanoparticle delivery were not detected. Drug release experiments showed particles were not able to sustain the drug release under the influence of a potential gradient. In conclusion, the application of MXS-loaded chitosan nanoparticles remains the best way to target MXS to the hair follicles while preventing dermal exposure.

Can a rapid measure of self-exposure to drugs of abuse provide dimensional information on depression comorbidity?

Science.gov (United States)

Butelman, Eduardo Roque; Bacciardi, Silvia; Maremmani, Angelo Giovanni Icro; Darst-Campbell, Maya; Correa da Rosa, Joel; Kreek, Mary Jeanne

2017-09-01

Addictions to heroin or to cocaine are associated with substantial psychiatric comorbidity, including depression. Poly-drug self-exposure (eg, to heroin, cocaine, cannabis, or alcohol) is also common, and may further affect depression comorbidity. This case-control study examined the relationship of exposure to the above drugs and depression comorbidity. Participants were recruited from methadone maintenance clinics, and from the community. Adult male and female participants (n = 1,201) were ascertained consecutively by experienced licensed clinicians. The instruments used were the SCID-I, and Kreek-McHugh-Schluger-Kellogg (KMSK) scales, which provide a rapid dimensional measure of maximal lifetime self-exposure to each of the above drugs. This measure ranges from no exposure to high unit dose, high frequency, and long duration of exposure. A multiple logistic regression with stepwise variable selection revealed that increasing exposure to heroin or to cocaine was associated greater odds of depression, with all cases and controls combined. In cases with an opioid dependence diagnosis, increasing cocaine exposure was associated with a further increase in odds of depression. However, in cases with a cocaine dependence diagnosis, increasing exposure to either cannabis or alcohol, as well as heroin, was associated with a further increase in odds of depression. This dimensional analysis of exposure to specific drugs provides insights on depression comorbidity with addictive diseases, and the impact of poly-drug exposure. A rapid analysis of exposure to drugs of abuse reveals how specific patterns of drug and poly-drug exposure are associated with increasing odds of depression. This approach detected quantitatively how different patterns of poly-drug exposure can result in increased odds of depression comorbidity, in cases diagnosed with opioid versus cocaine dependence. (Am J Addict 2017;26:632-639). © 2017 American Academy of Addiction Psychiatry.

Bioactive Glass Nanoparticles as a New Delivery System for Sustained 5-Fluorouracil Release: Characterization and Evaluation of Drug Release Mechanism

Directory of Open Access Journals (Sweden)

Abeer M. El-Kady

2015-01-01

Full Text Available Bioactive glass nanoparticles were synthesized and tested for the first time as a new delivery system for sustained 5-fluorouracil (5-FU release. They were characterized by TEM, DTA, TGA, and FT-IR. The porosity % and specific surface area of glass nanoparticles were 85.59% and 378.36 m2/g, respectively. The in vitro bioactivity evaluation confirmed that bioactive glass disks prepared from these nanoparticles could induce hydroxyapatite layer over their surfaces in simulated body fluid. The in vitro drug release experiment indicated that glass nanoparticles could serve as long-term local delivery vehicles for sustained 5-FU release. The release profile of 5-FU showed an initial fast release stage followed by a second stage of slower release. The initial burst release of 5-FU in the first day was about 23% (28.92 mg·L−1 of the total amount of loaded 5-FU, while the final cumulative percentage of the 5-FU released after 32 days was about 45.6% (57.31 mg·L−1 of the total amount of loaded 5-FU. The application of different mathematical models indicated that 5-FU was released by diffusion controlled mechanism and suggested that its release rate was dependent on glass particles dissolution, changes of surface area as well as diameter of glass particles, and concentration of loaded drug.

Self-Assembled Smart Nanocarriers for Targeted Drug Delivery.

Science.gov (United States)

Cui, Wei; Li, Junbai; Decher, Gero

2016-02-10

Nanostructured drug-carrier systems promise numerous benefits for drug delivery. They can be engineered to precisely control drug-release rates or to target specific sites within the body with a specific amount of therapeutic agent. However, to achieve the best therapeutic effects, the systems should be designed for carrying the optimum amount of a drug to the desired target where it should be released at the optimum rate for a specified time. Despite numerous attempts, fulfilling all of these requirements in a synergistic way remains a huge challenge. The trend in drug delivery is consequently directed toward integrated multifunctional carrier systems, providing selective recognition in combination with sustained or triggered release. Capsules as vesicular systems enable drugs to be confined for controlled release. Furthermore, carriers modified with recognition groups can enhance the capability of encapsulated drug efficacy. Here, recent advances are reviewed regarding designing and preparing assembled capsules with targeting ligands or size controllable for selective recognition in drug delivery. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Sustainable NREL - Site Sustainability Plan FY 2015

Energy Technology Data Exchange (ETDEWEB)

None, None

2015-01-01

NREL's Site Sustainability Plan FY 2015 reports on sustainability plans for the lab for the year 2015 based on Executive Order Goals and provides the status on planned actions cited in the FY 2014 report.

Pharmaceutical cost-containment policies and sustainability: recent Irish experience.

Science.gov (United States)

Kenneally, Martin; Walshe, Valerie

2012-01-01

Our objective is to review and assess the main pharmaceutical cost-containment policies used in Ireland in recent years, and to highlight how a policy that improved fiscal sustainability but worsened economic sustainability could have improved both if an option-based approach was implemented. The main public pharmaceutical cost-containment policy measures including reducing the ex-factory price of drugs, pharmacy dispensing fees and community drug scheme coverage, and increasing patient copayments are outlined along with the resulting savings. We quantify the cost implications of a new policy that restricts the entitlement to free prescription drugs of persons older than 70 years and propose an alternative option-based policy that reduces the total cost to both the state and the patient. This set of policy measures reduced public spending on community drugs by an estimated €380m in 2011. The policy restricting free prescription drugs for persons older than 70 years, though effective in reducing public cost, increased the total cost of the drugs supplied. The policy-induced cost increase stems from a fees anomaly between the two main community drugs schemes which is circumvented by our alternative option-based policy. Our findings highlight the need for policymakers, even when absorbed with reducing cost, to design cost-containment policies that are both fiscally and economically sustainable. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Development and Characterization of Chitosan Cross-Linked With Tripolyphosphate as a Sustained Release Agent in Tablets, Part I: Design of Experiments and Optimization.

Science.gov (United States)

Pinto, Colin A; Saripella, Kalyan K; Loka, Nikhil C; Neau, Steven H

2018-04-01

Certain issues with the use of particles of chitosan (Ch) cross-linked with tripolyphosphate (TPP) in sustained release formulations include inefficient drug loading, burst drug release, and incomplete drug release. Acetaminophen was added to Ch:TPP particles to test for advantages of drug addition extragranularly over drug addition made during cross-linking. The influences of Ch concentration, Ch:TPP ratio, temperature, ionic strength, and pH were assessed. Design of experiments allowed identification of factors and 2-factor interactions that have significant effects on average particle size and size distribution, yield, zeta potential, and true density of the particles, as well as drug release from the directly compressed tablets. Statistical model equations directed production of a control batch that minimized span, maximized yield, and targeted a t 50 of 90 min (sample A); sample B that differed by targeting a t 50 of 240-300 min to provide sustained release; and sample C that differed from sample B by maximizing span. Sample B maximized yield and provided its targeted t 50 and the smallest average particle size, with the higher zeta potential and the lower span of samples B and C. Extragranular addition of a drug to Ch:TPP particles achieved 100% drug loading, eliminated a burst drug release, and can accomplish complete drug release. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Liver cancer cells: targeting and prolonged-release drug carriers consisting of mesoporous silica nanoparticles and alginate microspheres

Directory of Open Access Journals (Sweden)

Liao YT

2014-06-01

Full Text Available Yu-Te Liao,1 Chia-Hung Liu,2 Jiashing Yu,1 Kevin C-W Wu1,3 1Department of Chemical Engineering, National Taiwan University, Taipei, Taiwan; 2Department of Urology, Taipei Medical University-Shuang Ho Hospital, New Taipei City, Taiwan; 3Division of Medical Engineering Research, National Health Research Institutes, Zhunan Township, Miaoli County, Taiwan Abstract: A new microsphere consisting of inorganic mesoporous silica nanoparticles (MSNs and organic alginate (denoted as MSN@Alg was successfully synthesized by air-dynamic atomization and applied to the intracellular drug delivery systems (DDS of liver cancer cells with sustained release and specific targeting properties. MSN@Alg microspheres have the advantages of MSN and alginate, where MSN provides a large surface area for high drug loading and alginate provides excellent biocompatibility and COOH functionality for specific targeting. Rhodamine 6G was used as a model drug, and the sustained release behavior of the rhodamine 6G-loaded MSN@Alg microspheres can be prolonged up to 20 days. For targeting therapy, the anticancer drug doxorubicin was loaded into MSN@Alg microspheres, and the (lysine4-tyrosine-arginine-glycine-aspartic acid (K4YRGD peptide was functionalized onto the surface of MSN@Alg for targeting liver cancer cells, hepatocellular carcinoma (HepG2. The results of the 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide (MTT assay and confocal laser scanning microscopy indicate that the MSN@Alg microspheres were successfully uptaken by HepG2 without apparent cytotoxicity. In addition, the intracellular drug delivery efficiency was greatly enhanced (ie, 3.5-fold for the arginine-glycine-aspartic acid (RGD-labeled, doxorubicin-loaded MSN@Alg drug delivery system compared with the non-RGD case. The synthesized MSN@Alg microspheres show great potential as drug vehicles with high biocompatibility, sustained release, and targeting features for future intracellular DDS. Keywords

Design and characterization of sustained release ketoprofen entrapped carnauba wax microparticles.

Science.gov (United States)

Oliveira, Rodinelli B; Nascimento, Thais L; Lima, Eliana M

2012-01-01

Ketoprofen is a non-steroid anti-inflammatory drug (NSAID) used in the treatment of rheumatic diseases and in mild to moderate pain. Ketoprofen has a short biological half-life and the commercially available conventional release formulations require dosages to be administered at least 2-3 times a day. Due to these characteristics, ketoprofen is a good candidate for the preparation of controlled release formulations. In this work, a multiparticulate-sustained release dosage form containing ketoprofen in a carnauba wax matrix was developed. Particles were prepared by an emulsion congealing technique. System variables were optimized using fractional factorial and response surface experimental design. Characterization of the particles included size and morphology, flow rate, drug loading and in vitro drug release. Spherical particles were obtained with high drug load and sustained drug release profile. The optimized particles had an average diameter of approximately 200 µm, 50% (w/w) drug load, good flow properties and prolonged ketoprofen release for more than 24 h. Carnauba wax microspheres prepared in this work represent a new multiparticulate-sustained release system for the NSAID ketoprofen, exhibiting good potential for application in further pharmaceutical processes.

Examining the production costs of antiretroviral drugs.

Science.gov (United States)

Pinheiro, Eloan; Vasan, Ashwin; Kim, Jim Yong; Lee, Evan; Guimier, Jean Marc; Perriens, Joseph

2006-08-22

To present direct manufacturing costs and price calculations of individual antiretroviral drugs, enabling those responsible for their procurement to have a better understanding of the cost structure of their production, and to indicate the prices at which these antiretroviral drugs could be offered in developing country markets. Direct manufacturing costs and factory prices for selected first and second-line antiretroviral drugs were calculated based on cost structure data from a state-owned company in Brazil. Prices for the active pharmaceutical ingredients (API) were taken from a recent survey by the World Health Organization (WHO). The calculated prices for antiretroviral drugs are compared with quoted prices offered by privately-owned, for-profit manufacturers. The API represents the largest component of direct manufacturing costs (55-99%), while other inputs, such as salaries, equipment costs, and scale of production, have a minimal impact. The calculated prices for most of the antiretroviral drugs studied fall within the lower quartile of the range of quoted prices in developing country markets. The exceptions are those drugs, primarily for second-line therapy, for which the API is either under patent, in short supply, or in limited use in developing countries (e.g. abacavir, lopinavir/ritonavir, nelfinavir, saquinavir). The availability of data on the cost of antiretroviral drug production and calculation of factory prices under a sustainable business model provide benchmarks that bulk purchasers of antiretroviral drugs could use to negotiate lower prices. While truly significant price decreases for antiretroviral drugs will depend largely on the future evolution of API prices, the present study demonstrates that for several antiretroviral drugs price reduction is currently possible. Whether or not these reductions materialize will depend on the magnitude of indirect cost and profit added by each supplier over the direct production costs. The ability to

Finding synergy between local competitiveness and global sustainability to provide a future to nuclear energy

International Nuclear Information System (INIS)

Van Den Durpel, Luc; Yacout, Abdellatif; Wade, Dave

2008-01-01

The world's future energy needs will require a mix of energy conversion technologies matched to the local energy market needs while also responding to both local and global socio-political concerns, e.g. energy security, environmental impact, safety and non-proliferation. There is growing recognition worldwide that nuclear energy should not only be part of the solution but maybe as well play a larger share in future's energy supply. The sustainability of future nuclear energy systems is hereby important and a variety of studies have already shown that sustainability of nuclear energy from a resource perspective is achievable via the nuclear fuel cycle though where economic sustainability is essentially defined by the nuclear power plants. The main challenge in deploying sustainable nuclear energy systems will be to find synergies between this local competitiveness of nuclear power plants and the global resource sustainability defined via the nuclear fuel cycle. Both may go hand-in-hand in the long-term but may need government guidance in starting the transition towards such future sustainable nuclear energy systems. (authors)

75 FR 69449 - Draft Guidance for Industry and Food and Drug Administration Staff on Dear Health Care Provider...

Science.gov (United States)

2010-11-12

... annually from approximately 25 application holders. FDA professionals familiar with Dear Health Care... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-D-0319] Draft Guidance for Industry and Food and Drug Administration Staff on Dear Health Care Provider Letters...

Single Intravenous Dose of Novel Flurbiprofen-Loaded Proniosome Formulations Provides Prolonged Systemic Exposure and Anti-inflammatory Effect.

Science.gov (United States)

Verma, Preeti; Prajapati, Sunil K; Yadav, Rajbharan; Senyschyn, Danielle; Shea, Peter R; Trevaskis, Natalie L

2016-11-07

hydrated proniosomes can prolong systemic drug exposure over 3 days and provide a sustained therapeutic effect. The developed proniosomes represent a novel approach to treat acute pain and inflammation with the potential to be administered as a single intravenous dose by a clinician at the time of injury or surgery that provides adequate relief for several days and reduces fluctuations in therapy. Similar systems loaded with different drugs have potential for broader application in anesthesia, anti-infective, antiemetic, and cancer therapy.

Enhanced drug delivery capabilities from stents coated with absorbable polymer and crystalline drug.

Science.gov (United States)

Carlyle, Wenda C; McClain, James B; Tzafriri, Abraham R; Bailey, Lynn; Zani, Brett G; Markham, Peter M; Stanley, James R L; Edelman, Elazer R

2012-09-28

Current drug eluting stent (DES) technology is not optimized with regard to the pharmacokinetics of drug delivery. A novel, absorbable-coating sirolimus-eluting stent (AC-SES) was evaluated for its capacity to deliver drug more evenly within the intimal area rather than concentrating drug around the stent struts and for its ability to match coating erosion with drug release. The coating consisted of absorbable poly-lactide-co-glycolic acid (PLGA) and crystalline sirolimus deposited by a dry-powder electrostatic process. The AC-SES demonstrated enhanced drug stability under simulated use conditions and consistent drug delivery balanced with coating erosion in a porcine coronary implant model. The initial drug burst was eliminated and drug release was sustained after implantation. The coating was absorbed within 90 days. Following implantation into porcine coronary arteries the AC-SES coating is distributed in the surrounding intimal tissue over the course of several weeks. Computational modeling of drug delivery characteristics demonstrates how distributed coating optimizes the load of drug immediately around each stent strut and extends drug delivery between stent struts. The result was a highly efficient arterial uptake of drug with superior performance to a clinical bare metal stent (BMS). Neointimal thickness (0.17±0.07 mm vs. 0.28±0.11 mm) and area percent stenosis (22±9% vs. 35±12%) were significantly reduced (pstent implantation in an overlap configuration in porcine coronary arteries. Inflammation was significantly reduced in the AC-SES compared to the BMS at both 30 and 90 days after implantation. Biocompatible, rapidly absorbable stent coatings enable the matching of drug release with coating erosion and provide for the controlled migration of coating material into tissue to reduce vicissitudes in drug tissue levels, optimizing efficacy and reducing potential toxicity. Copyright © 2012 Elsevier B.V. All rights reserved.

21 CFR 20.105 - Testing and research conducted by or with funds provided by the Food and Drug Administration.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Testing and research conducted by or with funds... Categories of Records § 20.105 Testing and research conducted by or with funds provided by the Food and Drug Administration. (a) Any list that may be prepared by the Food and Drug Administration of testing and research...

Drug-resistant tuberculosis: time for visionary political leadership.

Science.gov (United States)

Abubakar, Ibrahim; Zignol, Matteo; Falzon, Dennis; Raviglione, Mario; Ditiu, Lucica; Masham, Susan; Adetifa, Ifedayo; Ford, Nathan; Cox, Helen; Lawn, Stephen D; Marais, Ben J; McHugh, Timothy D; Mwaba, Peter; Bates, Matthew; Lipman, Marc; Zijenah, Lynn; Logan, Simon; McNerney, Ruth; Zumla, Adam; Sarda, Krishna; Nahid, Payam; Hoelscher, Michael; Pletschette, Michel; Memish, Ziad A; Kim, Peter; Hafner, Richard; Cole, Stewart; Migliori, Giovanni Battista; Maeurer, Markus; Schito, Marco; Zumla, Alimuddin

2013-06-01

Two decades ago, WHO declared tuberculosis a global emergency, and invested in the highly cost-effective directly observed treatment short-course programme to control the epidemic. At that time, most strains of Mycobacterium tuberculosis were susceptible to first-line tuberculosis drugs, and drug resistance was not a major issue. However, in 2013, tuberculosis remains a major public health concern worldwide, with prevalence of multidrug-resistant (MDR) tuberculosis rising. WHO estimates roughly 630 000 cases of MDR tuberculosis worldwide, with great variation in the frequency of MDR tuberculosis between countries. In the past 8 years, extensively drug-resistant (XDR) tuberculosis has emerged, and has been reported in 84 countries, heralding the possibility of virtually untreatable tuberculosis. Increased population movement, the continuing HIV pandemic, and the rise in MDR tuberculosis pose formidable challenges to the global control of tuberculosis. We provide an overview of the global burden of drug-resistant disease; discuss the social, health service, management, and control issues that fuel and sustain the epidemic; and suggest specific recommendations for important next steps. Visionary political leadership is needed to curb the rise of MDR and XDR tuberculosis worldwide, through sustained funding and the implementation of global and regional action plans. Copyright © 2013 World Health Organization. Published by Elsevier Ltd/Inc/BV. All rights reserved. Published by Elsevier Ltd. All rights reserved.

Colon-specific pulsatile drug release provided by electrospun shellac nanocoating on hydrophilic amorphous composites.

Science.gov (United States)

Yang, Yao-Yao; Liu, Zhe-Peng; Yu, Deng-Guang; Wang, Ke; Liu, Ping; Chen, Xiaohong

2018-01-01

Colon-specific pulsatile drug release, as a combined drug controlled-release model, is a useful drug delivery manner for a series of diseases. New nanomedicines and related preparation methods are highly desired. With diclofenac sodium (DS) as a model drug, a new type of structural nanocomposite (SC), in which composite polyvinylpyrrolidone (PVP)-DS core was coated by shellac, was fabricated via modified coaxial electrospinning. For comparison, traditional PVP-DS monolithic hydrophilic nanocomposites (HCs) were generated using a traditional blending process. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), attenuated total reflectance-Fourier transform infrared (ATR-FTIR), water contact angle (WCA), and in vitro dissolution and ex vivo permeation tests were conducted to characterize the composites. SEM images demonstrated that both composites were linear nanofibers with smooth surface morphology and cross sections. TEM disclosed that the SCs had a thin shellac sheath layer of approximately 12 nm. XRD and ATR-FTIR results demonstrated that the crystalline DS was converted into amorphous composites with PVP because of favorable secondary interactions. WCA and in vitro dissolution tests demonstrated that the sheath shellac layers in SC could resist acid conditions and provide typical colon-specific pulsatile release, rather than a pulsatile release of HC under acid conditions. Ex vivo permeation results demonstrated that the SCs were able to furnish a tenfold drug permeation rate than the DS particles on the colon membrane. A new SC with a shellac coating on hydrophilic amorphous nanocomposites could furnish a colon-specific pulsatile drug release profile. The modified coaxial process can be exploited as a useful tool to create nanocoatings.

Mycobacterium tuberculosis whole genome sequencing and protein structure modelling provides insights into anti-tuberculosis drug resistance

KAUST Repository

Phelan, Jody

2016-03-23

Background Combating the spread of drug resistant tuberculosis is a global health priority. Whole genome association studies are being applied to identify genetic determinants of resistance to anti-tuberculosis drugs. Protein structure and interaction modelling are used to understand the functional effects of putative mutations and provide insight into the molecular mechanisms leading to resistance. Methods To investigate the potential utility of these approaches, we analysed the genomes of 144 Mycobacterium tuberculosis clinical isolates from The Special Programme for Research and Training in Tropical Diseases (TDR) collection sourced from 20 countries in four continents. A genome-wide approach was applied to 127 isolates to identify polymorphisms associated with minimum inhibitory concentrations for first-line anti-tuberculosis drugs. In addition, the effect of identified candidate mutations on protein stability and interactions was assessed quantitatively with well-established computational methods. Results The analysis revealed that mutations in the genes rpoB (rifampicin), katG (isoniazid), inhA-promoter (isoniazid), rpsL (streptomycin) and embB (ethambutol) were responsible for the majority of resistance observed. A subset of the mutations identified in rpoB and katG were predicted to affect protein stability. Further, a strong direct correlation was observed between the minimum inhibitory concentration values and the distance of the mutated residues in the three-dimensional structures of rpoB and katG to their respective drugs binding sites. Conclusions Using the TDR resource, we demonstrate the usefulness of whole genome association and convergent evolution approaches to detect known and potentially novel mutations associated with drug resistance. Further, protein structural modelling could provide a means of predicting the impact of polymorphisms on drug efficacy in the absence of phenotypic data. These approaches could ultimately lead to novel resistance

Afterschool Sustainability

Directory of Open Access Journals (Sweden)

Hilary D. Joyce

2014-12-01

Full Text Available Youth participation in quality extended learning opportunities (ELOs results in positive academic, physical, mental health, and social/emotional outcomes. Funding is essential to implementing and sustaining quality ELOs; however multiple funding barriers and challenges exist. Understanding the types of funds available for ELOs and the factors that influence sustainability is critical. Through surveys and telephone interviews of ELO providers, this descriptive study identified and examined ELO funding streams, the ways ELO providers use these funding streams, and the barriers and challenges to sustainability. ELO programs often relied on one major funding stream coupled with nutrition supports as well as in-kind resources. Barriers to sustainability included year-to-year funding, transportation costs, reducing community partnerships, and difficulty in diversifying funds. Recommendations to enhance ELO sustainability are offered, particularly in relation to overcoming the challenges to diversification of funding resources and establishing mutually supportive partnerships and collaboration.

Organized polysaccharide fibers as stable drug carriers

Science.gov (United States)

Janaswamy, Srinivas; Gill, Kristin L.; Campanella, Osvaldo H.; Pinal, Rodolfo

2013-01-01

Many challenges arise during the development of new drug carrier systems, and paramount among them are safety, solubility and controlled release requirements. Although synthetic polymers are effective, the possibility of side effects imposes restrictions on their acceptable use and dose limits. Thus, a new drug carrier system that is safe to handle and free from side effects is very much in need and food grade polysaccharides stand tall as worthy alternatives. Herein, we demonstrate for the first time the feasibility of sodium iota-carrageenan fibers and their distinctive water pockets to embed and release a wide variety of drug molecules. Structural analysis has revealed the existence of crystalline network in the fibers even after encapsulating the drug molecules, and iota-carrageenan maintains its characteristic and reproducible double helical structure suggesting that the composites thus produced are reminiscent of cocrystals. The melting properties of iota-carrageenan:drug complexes are distinctly different from those of either drug or iota-carrageenan fiber. The encapsulated drugs are released in a sustained manner from the fiber matrix. Overall, our research provides an elegant opportunity for developing effective drug carriers with stable network toward enhancing and/or controlling bioavailability and extending shelf-life of drug molecules using GRAS excipients, food polysaccharides, that are inexpensive and non–toxic. PMID:23544530

Formulation design of an HPMC-based sustained release tablet for pyridostigmine bromide as a highly hygroscopic model drug and its in vivo/in vitro dissolution properties.

Science.gov (United States)

Huang, Yuh-Tyng; Tsai, Tong-Rong; Cheng, Chun-Jen; Cham, Thau-Ming; Lai, Tsun-Fwu; Chuo, Wen-Ho

2007-11-01

Pyridostigmine bromide (PB), a highly hygroscopic drug was selected as the model drug. A sustained-release (SR) tablet prepared by direct compression of wet-extruded and spheronized core pellets with HPMC excipients and exhibited a zero-order sustained release (SR) profile. The 2(3) full factorial design was utilized to search an optimal SR tablet formulation. This optimal formulation was followed zero-order mechanism and had specific release rate at different time intervals (released % of 1, 6, and 12 hr were 15.84, 58.56, and 93.10%). The results of moisture absorption by Karl Fischer meter showed the optimum SR tablet could improve the hygroscopic defect of the pure drug (PB). In the in vivo study, the results of the bioavailability data showed the T(max) was prolonged (from 0.65 +/- 0.082 hr to 4.83 +/- 1.60 hr) and AUC(0-t) (from 734.88 +/- 230.68 ng/ml.hr to 1153.34 +/- 488.08 ng/ml.hr) and was increased respectively for optimum PB-SR tablets when compared with commercial immediate release (IR) tablets. Furthermore, the percentages of in vitro dissolution and in vivo absorption in the rabbits have good correlation. We believe that PB-SR tablets designed in our study would improve defects of PB, decrease the frequency of administration and enhance the retention period of drug efficacy in vivo for personnel exposed to contamination situations in war or terrorist attacks in the future.

Biodegradable drug-eluting nanofiber-enveloped implants for sustained release of high bactericidal concentrations of vancomycin and ceftazidime: in vitro and in vivo studies

Directory of Open Access Journals (Sweden)

Hsu YH

2014-09-01

Full Text Available Yung-Heng Hsu,1,2 Dave Wei-Chih Chen,1 Chun-Der Tai,3 Ying-Chao Chou,1,2 Shih-Jung Liu,2 Steve Wen-Neng Ueng,1 Err-Cheng Chan4 1Department of Orthopedic Surgery, Chang Gung Memorial Hospital, Guishan Township, 2Department of Mechanical Engineering, Chang Gung University, Guishan Township, 3Graduate Institute of Medical Mechatronics, Chang Gung University, Guishan Township, 4School of Medical Technology, Chang Gung University, Guishan Township, Taiwan Abstract: We developed biodegradable drug-eluting nanofiber-enveloped implants that provided sustained release of vancomycin and ceftazidime. To prepare the biodegradable nanofibrous membranes, poly(D,L-lactide-co-glycolide and the antibiotics were first dissolved in 1,1,1,3,3,3-hexafluoro-2-propanol. They were electrospun into biodegradable drug-eluting membranes, which were then enveloped on the surface of stainless plates. An elution method and a high-performance liquid chromatography assay were employed to characterize the in vivo and in vitro release rates of the antibiotics from the nanofiber-enveloped plates. The results showed that the biodegradable nanofiber-enveloped plates released high concentrations of vancomycin and ceftazidime (well above the minimum inhibitory concentration for more than 3 and 8 weeks in vitro and in vivo, respectively. A bacterial inhibition test was carried out to determine the relative activity of the released antibiotics. The bioactivity ranged from 25% to 100%. In addition, the serum creatinine level remained within the normal range, suggesting that the high vancomycin concentration did not affect renal function. By adopting the electrospinning technique, we will be able to manufacture biodegradable drug-eluting implants for the long-term drug delivery of different antibiotics. Keywords: biodegradable nanofiber-enveloped plates, electrospinning, antibiotics, release characteristics

Statistical Optimization of Sustained Release Venlafaxine HCI Wax Matrix Tablet.

Science.gov (United States)

Bhalekar, M R; Madgulkar, A R; Sheladiya, D D; Kshirsagar, S J; Wable, N D; Desale, S S

2008-01-01

The purpose of this research was to prepare a sustained release drug delivery system of venlafaxine hydrochloride by using a wax matrix system. The effects of bees wax and carnauba wax on drug release profile was investigated. A 3(2) full factorial design was applied to systemically optimize the drug release profile. Amounts of carnauba wax (X(1)) and bees wax (X(2)) were selected as independent variables and release after 12 h and time required for 50% (t(50)) drug release were selected as dependent variables. A mathematical model was generated for each response parameter. Both waxes retarded release after 12 h and increases the t(50) but bees wax showed significant influence. The drug release pattern for all the formulation combinations was found to be approaching Peppas kinetic model. Suitable combination of two waxes provided fairly good regulated release profile. The response surfaces and contour plots for each response parameter are presented for further interpretation of the results. The optimum formulations were chosen and their predicted results found to be in close agreement with experimental findings.

Reducing post-surgical adhesions utilizing a drug-enhanced device: sodium carboxymethylcellulose aqueous gel/poly(p-dioxanone) and Tranilast

International Nuclear Information System (INIS)

Cui, Helen; Gensini, Michel; Kataria, Ram; Twaddle, Tricia; Zhang, John; Wadsworth, Scott; Cooper, Kevin; Petrilli, Janel; Rodgers, Kathleen; DiZerega, Gere

2009-01-01

Post-surgical adhesion formation has numerous deleterious side effects in a wide variety of surgical settings. Physical barriers used together with laparoscopy were developed to reduce tissue trauma seen with open procedures. However, despite surgeons' meticulous techniques and the use of such barriers, adhesion formation remains a serious clinical problem, creating complications that cost the health care system over $1 billion annually. Our laboratories have combined a previously marketed drug, Tranilast, with a sodium carboxymethylcellulose (NaCMC) gel in a sustained release formulation using poly(p-dioxanone) (PDO) to provide a locally delivered medicated device that significantly reduces adhesions. This paper describes the preparation of the gel and the sustained release formulation, its key physical properties, and its sustained release kinetics. Pre-clinical data on inhibition of adhesion formation by the sustained release poly(p-dioxanone)/sodium carboxymethylcellulose/Tranilast drug enhanced device are also presented.

Sustainable diets within sustainable food systems.

Science.gov (United States)

Meybeck, Alexandre; Gitz, Vincent

2017-02-01

Sustainable diets and sustainable food systems are increasingly explored by diverse scientific disciplines. They are also recognised by the international community and called upon to orient action towards the eradication of hunger and malnutrition and the fulfilment of sustainable development goals. The aim of the present paper is to briefly consider some of the links between these two notions in order to facilitate the operationalisation of the concept of sustainable diet. The concept of sustainable diet was defined in 2010 combining two totally different perspectives: a nutrition perspective, focused on individuals, and a global sustainability perspective, in all its dimensions: environmental, economic and social. The nutrition perspective can be easily related to health outcomes. The global sustainability perspective is more difficult to analyse directly. We propose that it be measured as the contribution of a diet to the sustainability of food systems. Such an approach, covering the three dimensions of sustainability, enables identification of interactions and interrelations between food systems and diets. It provides opportunities to find levers of change towards sustainability. Diets are both the results and the drivers of food systems. The drivers of change for those variously involved, consumers and private individuals, are different, and can be triggered by different dimensions (heath, environment, social and cultural). Combining different dimensions and reasons for change can help facilitate the transition to sustainable diets, recognising the food system's specificities. The adoption of sustainable diets can be facilitated and enabled by food systems, and by appropriate policies and incentives.

Layered gadolinium hydroxides for simultaneous drug delivery and imaging.

Science.gov (United States)

Xu, Yadong; Goyanes, Alvaro; Wang, Yuwei; Weston, Andrew J; So, Po-Wah; Geraldes, Carlos F G C; Fogg, Andrew M; Basit, Abdul W; Williams, Gareth R

2018-02-27

The potential of the layered gadolinium hydroxide (LGdH) [Gd 2 (OH) 5 ]Cl·yH 2 O (LGdH-Cl) for simultaneous drug delivery and magnetic resonance imaging was explored in this work. Three non-steroidal anti-inflammatory drugs (diclofenac [dic], ibuprofen [ibu], and naproxen [nap]) were intercalated into LGdH-Cl for the first time, using three different routes (ion exchange intercalation, coprecipitation, and exfoliation-self-assembly). X-ray diffraction, elemental microanalysis and IR spectroscopy confirmed successful incorporation of the drug into the interlayer spaces of the LGdH in all cases. From a comparison of the guest anion sizes and interlayer spacings, the active ingredients are believed to adopt intertwined bilayer configurations between the LGdH layers. The materials prepared by coprecipitation in general have noticeably higher drug loadings than those produced by ion exchange or self-assembly, as a result of the incorporation of some neutral drug into the composites. The LGdH-drug intercalates are stable at neutral pH, but rapidly degrade in acidic conditions to free Gd 3+ into solution. While LGdH-nap releases its drug loading into solution very rapidly (within ca. 1.5 h) at pH 7.4, LGdH-dic shows sustained release over 4 h, and LGdH-ibu extends this to 24 h. The latter composites therefore can be incorporated into enteric-coated tablets to provide sustained release in the small intestine. The drug intercalates are highly biocompatible and retain the proton relaxivity properties of the parent LGdH-Cl, with the materials most promising for use as negative contrast agents in MRI. Overall, the LGdH-drug intercalation compounds appear to have great potential for use in theranostic applications.

Sustained Release of a Water-Soluble Drug from Directly ...

African Journals Online (AJOL)

Okra gum was evaluated as a controlled-release agent in modified release matrices in comparison with sodium carboxymethylcellulose (NaCMC) using aspirin as the model drug. Tablets were produced by direct compression and the in vitro drug release was assessed under conditions similar to those in the gastrointestinal ...

Annual Sustainability Report FY 2014. Incorporates NREL Site Sustainability Plan

Energy Technology Data Exchange (ETDEWEB)

Rukavina, Frank [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2015-07-01

NREL's Sustainability Program is responsible for upholding all executive orders, federal regulations, U.S. Department of Energy (DOE) orders, and goals related to sustainable and resilient facility operations. But NREL continues to expand sustainable practices above and beyond the laboratory's regulations and requirements to ensure that the laboratory fulfills its mission into the future, leaves the smallest possible legacy footprint, and models sustainable operations and behaviors on national, regional, and local levels. The report, per the GRI reporting format, elaborates on multi-year goals relative to executive orders, achievements, and challenges; and success stories provide specific examples. A section called 'Sustaining NREL's Future Through Integration' provides insight into how NREL is successfully expanding the adoption of renewable energy technologies through integration.

[Alternatives to the drug research and development model].

Science.gov (United States)

Velásquez, Germán

2015-03-01

One-third of the global population lacks access to medications; the situation is worse in poor countries, where up to 50% of the population lacks access. The failure of current incentive systems based in intellectual property to offer the necessary pharmaceutical products, especially in the global south, is a call to action. Problems related to drug access cannot be solved solely through improvements or modifications in the existing incentive models. The intellectual property system model does not offer sufficient innovation for developing countries; new mechanisms that effectively promote innovation and drug access simultaneously are needed. A binding international agreement on research and development, negotiated under the auspices of the World Health Organization, could provide an adequate framework for guaranteeing priority-setting, coordination, and sustainable financing of drugs at reasonable prices for developing countries.

The impact of the Orphan Drug Act on drug discovery.

Science.gov (United States)

Haffner, Marlene E; Maher, Paul D

2006-11-01

For nearly a quarter of a century the FDA Office of Orphan Products Development has administered the US Orphan Drug Act, which assists in bringing a wide variety of drug and biological (drug) products to treat rare diseases to market. Enthusiasm for rare disease product development has been sustained, seen throughout a wide spectrum of product types and disease conditions, and has resulted in clinically meaningful medical advances. Development of programmes for rare disease treatment worldwide, coupled with the development of drugs for diseases affecting developing countries, attests to the strength of this legislation. The marketing of almost 300 products in the US for rare diseases also testifies to the depth and intensity of scientific endeavour in this area.

Co-extrusion as a processing technique to manufacture a dual sustained release fixed-dose combination product.

Science.gov (United States)

Vynckier, An-Katrien; Voorspoels, Jody; Remon, Jean Paul; Vervaet, Chris

2016-05-01

This study aimed to design a fixed-dose combination dosage form which provides a sustained release profile for both the freely water-soluble metformin HCl and the poorly soluble gliclazide, two antidiabetic compounds used to treat diabetes mellitus. Hot-melt co-extrusion was used as an innovative manufacturing technique for a pharmaceutical fixed-dose combination product. In this way, a matrix formulation that sustained metformin release could be developed, despite the high drug load in the formulation and the freely soluble nature of the drug. It was clear that co-extrusion was perfectly suited to produce a fixed-dose combination product with adequate properties for each of the incorporated APIs. A coat layer, containing at least 30% CAPA(®) 6506 as a hydrophobic polymer, was necessary to adequately sustain the release of the highly dosed freely soluble drug from the 70% metformin HCl-loaded CAPA(®) 6506 core of the co-extrudate. To obtain a complete gliclazide release over 24-h solubilization in Kollidon(®) VA, added as a second polymer to the CAPA(®) 6506 in the coat, was needed. Both active pharmaceutical ingredients (APIs), which have different physicochemical characteristics, were formulated in a single dosage form, using co-extrusion. © 2016 Royal Pharmaceutical Society, Journal of Pharmacy and Pharmacology.

Analysis of the data on pregnancy and lactation provided by patient information leaflets of anti-rheumatic drugs in Argentina.

Science.gov (United States)

Sabando, Miguel Ormaza; Saavedra, Maira Arias; Sequeira, Gabriel; Kerzberg, Eduardo

2018-04-01

To analyse the level of consistency and updating of the information on pregnancy and lactation provided by patient information leaflets (PILs) of the antirheumatic drugs approved in Argentina. Inconsistencies between the 2016 EULAR Task Force recommendations on the use of anti-rheumatic drugs during pregnancy and lactation and the information provided by PILs of the same drugs approved in Argentina were analysed along with inconsistencies within the PILs of different registered trademarks of these drugs. Eighty-eight PILs of 32 drugs were analysed. Out of the 88 PILs, 50% presented information inconsistencies as to pregnancy. Medications comprised in this group were: hydroxychloroquine, sulfasalazine, azathioprine, tacrolimus, cyclosporine, NSAIDs (during the first two trimesters), celecoxib, some glucocorticoids, colchicine, and some anti-TNF drugs (etanercept, adalimumab and infliximab) during part of the pregnancy. As for lactation, 56% had information inconsistencies. Medications encompassed in this group were: hydroxychloroquine, chloroquine, sulfasalazine, azathioprine, tacrolimus, cyclosporine, NSAIDs, celecoxib, meprednisone, prednisone, colchicine, and anti-TNF drugs. Out of 17 drugs that had more than one registered trademark, information inconsistencies on pregnancy were found in the PILs of sulfasalazine, diclofenac, ibuprofen and methylprednisolone. Concerning lactation, inconsistencies were present in the PILs of hydroxychloroquine, sulfasalazine, diclofenac, ibuprofen, meprednisone, and colchicine. At least half of the PILs of anti-rheumatic drugs analysed in this study had information inconsistencies on pregnancy and lactation. This is a serious state of affairs because the consensual decision-making process between patient and professional may be compromised, which, in turn, may give rise to medical-legal issues.

Dynamic Sustainability. Sustainability Window Analysis of Chinese Poverty-Environment Nexus Development

Directory of Open Access Journals (Sweden)

Jyrki Luukkanen

2015-10-01

Full Text Available Sustainability Window is a new analysis tool for assessing the sustainability of development simultaneously in all of its three dimensions (environmental, economic, and social. The analysis method provides information of the maximum and minimum economic development that is required to maintain the direction of social and environmental development towards more sustainable targets. With the Sustainability Window method it is possible to easily analyze the sustainability using different indicators and different time periods making comparative analyses easy. The new method makes it also possible to analyze the dynamics of the sustainability and the changes over time in the width of the window. This provides a new perspective for analyzing the trends of sustainability and the impacts of underlying sustainability policies. As an illustration of the method, we have carried out an analysis of Chinese development using CO2 and SO2 emissions as indicators of the environmental dimension, number of non-poor people as an indicator of the social dimension and GDP as an indicator of the economic dimension.

Gelucire Based In Situ Gelling Emulsions: A Potential Carrier for Sustained Stomach Specific Delivery of Gastric Irritant Drugs

Directory of Open Access Journals (Sweden)

Ashwin Saxena

2013-01-01

Full Text Available Non steroidal anti-inflammatory drugs (NSAIDs are commonly prescribed medications to the geriatric patients for the treatment of arthritis and other painful disorders. The major side effects of NSAIDs are related to their effects on the stomach and bowels. The present study concerns assessment of the potential of liquid in situ gelling emulsion formulations (emulgels as patient compliant stomach specific sustained release carrier for the delivery of highly gastric irritant drug, Piroxicam. Emulgels were prepared, without using any emulgent, by mixing different concentrations of molten Gelucire 39/01 with low viscosity sodium alginate solution prepared in deionized water at 50°C. CaCO3 was used as buoyancy imparting as well as crosslinking agent. Emulgels so prepared were homogenous, physically stable, and rapidly formed into buoyant gelled mass when exposed to simulated gastric fluid (SGF, pH 1.2. Drug release studies carried out in SGF revealed significant retardation (P<0.05 of Piroxicam release from emulgels compared to conventional in situ gelling formulations prepared without Gelucire 39/01. Pharmacodynamic studies carried out in albino rats revealed significantly increased analgesic/anti-inflammatory response from in situ emulgels compared to conventional in situ gelling formulations. Further, in vivo toxicity studies carried out in albino rats revealed no signs of gastric ulceration upon prolonged dosing.

Dietary nitrate provides sustained blood pressure lowering in hypertensive patients: a randomized, phase 2, double-blind, placebo-controlled study.

Science.gov (United States)

Kapil, Vikas; Khambata, Rayomand S; Robertson, Amy; Caulfield, Mark J; Ahluwalia, Amrita

2015-02-01

Single dose administration of dietary inorganic nitrate acutely reduces blood pressure (BP) in normotensive healthy volunteers, via bioconversion to the vasodilator nitric oxide. We assessed whether dietary nitrate might provide sustained BP lowering in patients with hypertension. We randomly assigned 68 patients with hypertension in a double-blind, placebo-controlled clinical trial to receive daily dietary supplementation for 4 weeks with either dietary nitrate (250 mL daily, as beetroot juice) or a placebo (250 mL daily, as nitrate-free beetroot juice) after a 2-week run-in period and followed by a 2-week washout. We performed stratified randomization of drug-naive (n=34) and treated (n=34) patients with hypertension aged 18 to 85 years. The primary end point was change in clinic, ambulatory, and home BP compared with placebo. Daily supplementation with dietary nitrate was associated with reduction in BP measured by 3 different methods. Mean (95% confidence interval) reduction in clinic BP was 7.7/2.4 mm Hg (3.6-11.8/0.0-4.9, Pnitrate consumption with no change after placebo. The intervention was well tolerated. This is the first evidence of durable BP reduction with dietary nitrate supplementation in a relevant patient group. These findings suggest a role for dietary nitrate as an affordable, readily-available, adjunctive treatment in the management of patients with hypertension (funded by The British Heart Foundation). http://www.clinicaltrials.gov. Unique identifier: NCT01405898. © 2014 American Heart Association, Inc.

Portugal's 2001 Drugs Liberalisation Policy: A UK Service Provider's Perspective on the Psychoactive Substances Act (2016)

Science.gov (United States)

Banbury, Samantha; Lusher, Joanne; Guedelha, Francisco

2018-01-01

The Misuse of Drugs Act (1971) and the Psychoactive Substances Act (2016) both reinforce the criminalisation of drug use in the UK. The Psychoactive Substances Act (2016) has been developed to control and monitor the use of legal highs, particularly in institutions. This study aimed to establish drug service providers' viewpoints on how effective…

The role of private drug vendors as malaria treatment providers in selected malaria endemic areas of Sri Lanka

DEFF Research Database (Denmark)

Rajakaruna, R S; Weerasinghe, M; Alifrangis, M

2006-01-01

was applied taking all response variables as binary outcome. RESULTS: Vendors' knowledge on antimalarials was poor with 58% of the vendors being unaware of the government malaria drug policy in the country. Also, the advice provided to customers buying antimalarials was limited. However, the majority......BACKGROUND AND OBJECTIVES: The involvement of private drug vendors in malaria treatment is particularly high in developing countries and understanding their practices and knowledge about antimalarials and malaria treatment will aid in devising strategies to increase the correct use of antimalarials...... and improve adherence to the government's malaria drug policy. Results of a study on the knowledge and practices of the private drug vendors conducted in seven districts in Sri Lanka, mostly in malarious areas are presented. METHODS: Data on awareness of government's malaria drug policy, practice of issuing...

Multi-Drug-Loaded Microcapsules with Controlled Release for Management of Parkinson's Disease.

Science.gov (United States)

Baek, Jong-Suep; Choo, Chee Chong; Qian, Cheng; Tan, Nguan Soon; Shen, Zexiang; Loo, Say Chye Joachim

2016-07-01

Parkinson's disease (PD) is a progressive disease of the nervous system, and is currently managed through commercial tablets that do not sufficiently enable controlled, sustained release capabilities. It is hypothesized that a drug delivery system that provides controlled and sustained release of PD drugs would afford better management of PD. Hollow microcapsules composed of poly-l-lactide (PLLA) and poly (caprolactone) (PCL) are prepared through a modified double-emulsion technique. They are loaded with three PD drugs, i.e., levodopa (LD), carbidopa (CD), and entacapone (ENT), at a ratio of 4:1:8, similar to commercial PD tablets. LD and CD are localized in both the hollow cavity and PLLA/PCL shell, while ENT is localized in the PLLA/PCL shell. Release kinetics of hydrophobic ENT is observed to be relatively slow as compared to the other hydrophilic drugs. It is further hypothesized that encapsulating ENT into PCL as a surface coating onto these microcapsules can aid in accelerating its release. Now, these spray-coated hollow microcapsules exhibit similar release kinetics, according to Higuchi's rate, for all three drugs. The results suggest that multiple drug encapsulation of LD, CD, and ENT in gastric floating microcapsules could be further developed for in vivo evaluation for the management of PD. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Potential applications for halloysite nanotubes based drug delivery systems

Science.gov (United States)

Sun, Lin

Drug delivery refers to approaches, formulations, technologies, and systems for transporting a drug in the body. The purpose is to enhance the drug efficacy and to reduce side reactions, which can significantly improve treatment outcomes. Halloysite is a naturally occurred alumino-silicate clay with a tubular structure. It is a biocompatible material with a big surface area which can be used for attachment of targeted molecules. Besides, loaded molecules can present a sustained release manner in solution. These properties make halloysite nanotubes (HNTs) a good option for drug delivery. In this study, a drug delivery system was built based on halloysite via three different fabrication methods: physical adsorption, vacuum loading and layer-by-layer coating. Methotrexate was used as the model drug. Factors that may affect performance in both drug loading and release were tested. Results showed that methotrexate could be incorporated within the HNTs system and released in a sustained manner. Layer-by-layer coating showed a better potential than the other two methods in both MTX loading and release. Besides, lower pH could greatly improve MTX loading and release while the increased number of polyelectrolytes bilayers had a limited impact. Osteosarcoma is the most common primary bone malignancy in children and adolescents. Postoperative recurrence and metastasis has become one of the leading causes for patient death after surgical remove of the tumor mass. A strategy could be a sustained release of chemotherapeutics directly at the primary tumor sites where recurrence would mostly occur. Then, this HNTs based system was tested with osteosarcoma cells in vitro to show the potential of delivering chemotherapeutics in the treatment of osteosarcoma. Methotrexate was incorporated within HNTs with a layer-bylayer coating technique, and drug coated HNTs were filled into nylon-6 which is a common material for surgical sutures in industry. Results showed that (1) methotrexate

[Establishment of modern multi-component sustained-release preparations of oral traditional Chinese medicines].

Science.gov (United States)

Xia, Hai-Jian; Zhang, Zhen-Hai; Liu, Dan; Yu, Dan-Hong; Jia, Xiao-Bin

2013-10-01

Traditional Chinese medicines have a long history, with a large quantity of efficient traditional Chinese medicines and prescriptions. However, the vast majority of pharmaceutical dose forms remain common preparations, with very few efficient, long-lasting and low-dose preparations. The sustain-release preparation allows sustained drug release in a longer period of time, maintains blood drug concentration, reduces the toxic effect and medication frequency, and improves medication compliance. Unlike monomer drugs, the material base of traditional Chinese medicine and compounds is multi-component, instead of single or several active monomers. Therefore, under the guidance of the Chinese medicine theories, modern multi-component sustained-release preparations were developed for oral traditional Chinese medicines, with the aim of finally improving the clinical efficacy of traditional Chinese medicines.

Poly(lactic-co-glycolic) acid drug delivery systems through transdermal pathway: an overview.

Science.gov (United States)

Naves, Lucas; Dhand, Chetna; Almeida, Luis; Rajamani, Lakshminarayanan; Ramakrishna, Seeram; Soares, Graça

2017-05-01

In past few decades, scientists have made tremendous advancement in the field of drug delivery systems (DDS), through transdermal pathway, as the skin represents a ready and large surface area for delivering drugs. Efforts are in progress to design efficient transdermal DDS that support sustained drug release at the targeted area for longer duration in the recommended therapeutic window without producing side-effects. Poly(lactic-co-glycolic acid) (PLGA) is one of the most promising Food and Drug Administration approved synthetic polymers in designing versatile drug delivery carriers for different drug administration routes, including transdermal drug delivery. The present review provides a brief introduction over the transdermal drug delivery and PLGA as a material in context to its role in designing drug delivery vehicles. Attempts are made to compile literatures over PLGA-based drug delivery vehicles, including microneedles, nanoparticles, and nanofibers and their role in transdermal drug delivery of different therapeutic agents. Different nanostructure evaluation techniques with their working principles are briefly explained.

Protein-Based Drug-Delivery Materials

OpenAIRE

Jao, Dave; Xue, Ye; Medina, Jethro; Hu, Xiao

2017-01-01

There is a pressing need for long-term, controlled drug release for sustained treatment of chronic or persistent medical conditions and diseases. Guided drug delivery is difficult because therapeutic compounds need to survive numerous transport barriers and binding targets throughout the body. Nanoscale protein-based polymers are increasingly used for drug and vaccine delivery to cross these biological barriers and through blood circulation to their molecular site of action. Protein-based pol...

Brazil: An emerging partner in drug R&D.

Science.gov (United States)

Rodrigues, Debora G

2009-08-01

With the need for innovation in drug discovery and development and changes to patent laws that are enabling greater IP protection, many pharmaceutical companies are pursuing international cooperation agreements with foreign companies as part of a global development strategy to enhance product pipelines. Brazil, the largest pharmaceutical market in Latin America, has improved its infrastructure, scientific and technological capabilities and has created a sustainable strategy to promote drug discovery research activities. Positive economic growth, a stable political structure, expanding patient populations an increasing governmental, private and foreign investments are creating a new landscape for drug R&D in the country. As Brazilian-based pharmaceutical companies become further established, new opportunities for partnerships and collaborative alliances are becoming available for the drug discovery process, as well as for co-manufacturing and co-marketing efforts. This feature review provides an overview of the Brazilian pharmaceutical market and discusses current opportunities, emerging trends and challenges for this expanding market.

Evaluation of the coat quality of sustained release pellets by individual pellet dissolution methodology.

Science.gov (United States)

Xu, Min; Liew, Celine Valeria; Heng, Paul Wan Sia

2015-01-15

This study explored the application of 400-DS dissolution apparatus 7 for individual pellet dissolution methodology by a design of experiment approach and compared its capability with that of the USP dissolution apparatus 1 and 2 for differentiating the coat quality of sustained release pellets. Drug loaded pellets were prepared by extrusion-spheronization from powder blends comprising 50%, w/w metformin, 25%, w/w microcrystalline cellulose and 25%, w/w lactose, and then coated with ethyl cellulose to produce sustained release pellets with 8% and 10%, w/w coat weight gains. Various pellet properties were investigated, including cumulative drug release behaviours of ensemble and individual pellets. When USP dissolution apparatus 1 and 2 were used for drug release study of the sustained release pellets prepared, floating and clumping of pellets were observed and confounded the release profiles of the ensemble pellets. Hence, the release profiles obtained did not characterize the actual drug release from individual pellet and the applicability of USP dissolution apparatus 1 and 2 to evaluate the coat quality of sustained release pellets was limited. The cumulative release profile of individual pellet using the 400-DS dissolution apparatus 7 was found to be more precise at distinguishing differences in the applied coat quality. The dip speed and dip interval of the reciprocating holder were critical operational parameters of 400-DS dissolution apparatus 7 that affected the drug release rate of a sustained release pellet during the individual dissolution study. The individual dissolution methodology using the 400-DS dissolution apparatus 7 is a promising technique to evaluate the individual pellet coat quality without the influence of confounding factors such as pellet floating and clumping observed during drug release test with dissolution apparatus 1 and 2, as well as to facilitate the elucidation of the actual drug release mechanism conferred by the applied sustained

An Overview of Chitosan Nanoparticles and Its Application in Non-Parenteral Drug Delivery

Directory of Open Access Journals (Sweden)

Munawar A. Mohammed

2017-11-01

Full Text Available The focus of this review is to provide an overview of the chitosan based nanoparticles for various non-parenteral applications and also to put a spotlight on current research including sustained release and mucoadhesive chitosan dosage forms. Chitosan is a biodegradable, biocompatible polymer regarded as safe for human dietary use and approved for wound dressing applications. Chitosan has been used as a carrier in polymeric nanoparticles for drug delivery through various routes of administration. Chitosan has chemical functional groups that can be modified to achieve specific goals, making it a polymer with a tremendous range of potential applications. Nanoparticles (NP prepared with chitosan and chitosan derivatives typically possess a positive surface charge and mucoadhesive properties such that can adhere to mucus membranes and release the drug payload in a sustained release manner. Chitosan-based NP have various applications in non-parenteral drug delivery for the treatment of cancer, gastrointestinal diseases, pulmonary diseases, drug delivery to the brain and ocular infections which will be exemplified in this review. Chitosan shows low toxicity both in vitro and some in vivo models. This review explores recent research on chitosan based NP for non-parenteral drug delivery, chitosan properties, modification, toxicity, pharmacokinetics and preclinical studies.

Novel Pentablock Copolymers as Thermosensitive Self-Assembling Micelles for Ocular Drug Delivery

Directory of Open Access Journals (Sweden)

Mitra Alami-Milani

2017-04-01

Full Text Available Many studies have focused on how drugs are formulated in the sol state at room temperature leading to the formation of in situ gel at eye temperature to provide a controlled drug release. Stimuli-responsive block copolymer hydrogels possess several advantages including uncomplicated drug formulation and ease of application, no organic solvent, protective environment for drugs, site-specificity, prolonged and localized drug delivery, lower systemic toxicity, and capability to deliver both hydrophobic and hydrophilic drugs. Self-assembling block copolymers (such as diblock, triblock, and pentablock copolymers with large solubility variation between hydrophilic and hydrophobic segments are capable of making temperature-dependent micellar assembles, and with further increase in the temperature, of jellifying due to micellar aggregation. In general, molecular weight, hydrophobicity, and block arrangement have a significant effect on polymer crystallinity, micelle size, and in vitro drug release profile. The limitations of creature triblock copolymers as initial burst release can be largely avoided using micelles made of pentablock copolymers. Moreover, formulations based on pentablock copolymers can sustain drug release for a longer time. The present study aims to provide a concise overview of the initial and recent progresses in the design of hydrogel-based ocular drug delivery systems.

Polymeric Micro- and Nanofabricatced Devices for Oral Drug Delivery

Science.gov (United States)

Fox, Cade Brylee

While oral drug administration is by far the most preferred route, it is accompanied by many barriers that limit drug uptake such as the low pH of the stomach, metabolic and proteolytic enzymes, and limited permeability of the intestinal epithelium. As a result, many drugs ranging from small molecules to biological therapeutics have limited oral bioavailability, precluding them from oral administration. To address this issue, microfabrication has been applied to create planar, asymmetric devices capable of binding to the lining of the gastrointestinal tract and releasing drug at high concentrations, thereby increasing oral drug uptake. While the efficacy of these devices has been validated in vitro and in vivo, modifying their surfaces with nanoscale features has potential to refine their properties for enhanced drug delivery. This dissertation first presents an approach to fabricate polymeric microdevices coated with nanowires in a rapid, high throughput manner. The nanowires demonstrate rapid drug localization onto the surface of these devices via capillary action and increased adhesion to epithelial tissue, suggesting that this fabrication technique can be used to create devices with enhanced properties for oral drug delivery. Also presented are microdevices sealed with nanostraw membranes. The nanostraw membranes provide sustained drug release by limiting drug efflux from the devices, prevent drug degradation by limiting influx of outside biomolecules, and enhance device bioadhesion by penetrating into the mucus layer of the intestinal lining. Finally, an approach that dramatically increases the capacity and efficiency of drug loading into microdevices over previous methods is presented. A picoliter-volume printer is used to print drug directly into device reservoirs in an automated fashion. The technologies presented here expand the capabilities of microdevices for oral drug delivery by incorporating nanoscale structures that enhance device bioadhesion

Preparation and in-vitro in-vivo evaluation of sustained release matrix diclofenac sodium tablets using PVP-K90 and natural gums.

Science.gov (United States)

Iqbal, Zafar; Khan, Raza; Nasir, Fazli; Khan, Jamshaid Ali; Rashid, Abdur; Khan, Abbas; Khan, Abad

2011-10-01

Conventional dosage form is nowadays mostly replaced by sustained release formulation in order to increase drug efficacy and patient compliance. The sustained release properties of the PVP K90 alone and in combination with guar gum, xanthan gum and gum tragacanth were evaluated using diclofenac sodium (100 mg/tablet) as a model drug. Tablets were processed using wet granulation method and evaluated for sustained drug release properties. The drug release from the formulations was studied in relationship with Commercially available Diclofenac Sodium SR, used as a reference tablets and results were expressed as similarity (f1) and differential factor (f2). The tablets prepared using PVP K90 160 mg/tablet sustained the release of diclofenac sodium for 12 hours. Formulations where the PVP K90 was partially replaced with different gums also sustained the release of drug for 12 hours. The release of the drug from these formulations mainly followed Higuchi model and super case-II and Non-Fickian diffusion. The in-vivo drug release was studied in healthy human volunteers using non-blinded cross over, two period design using Diclofenac Sodium SR Tablets as a reference drug. The relative bioavailability of the formulation containing PVP K90 and gum tragacanth was 0.91. The studies showed that the use of the PVP K90 in combination with gum tragacanth both in-vitro and in-vivo sustained the release of the drug.

Supersaturating drug delivery systems

DEFF Research Database (Denmark)

Laitinen, Riikka; Löbmann, Korbinian; Grohganz, Holger

2017-01-01

of the bioavailability of poorly water-soluble drugs by increasing the driving force for drug absorption. However, ASDs often require a high weight percentage of carrier (usually a hydrophilic polymer) to ensure molecular mixing of the drug in the carrier and stabilization of the supersaturated state, often leading......Amorphous solid dispersions (ASDs) are probably the most common and important supersaturating drug delivery systems for the formulation of poorly water-soluble compounds. These delivery systems are able to achieve and maintain a sustained drug supersaturation which enables improvement...... strategy for poorly-soluble drugs. While the current research on co-amorphous formulations is focused on preparation and characterization of these systems, more detailed research on their supersaturation and precipitation behavior and the effect of co-formers on nucleation and crystal growth inhibition...

Sustained Release Talazoparib Implants for Localized Treatment of BRCA1-deficient Breast Cancer.

Science.gov (United States)

Belz, Jodi E; Kumar, Rajiv; Baldwin, Paige; Ojo, Noelle Castilla; Leal, Ana S; Royce, Darlene B; Zhang, Di; van de Ven, Anne L; Liby, Karen T; Sridhar, Srinivas

2017-01-01

Talazoparib, a potent PARP inhibitor, has shown promising clinical and pre-clinical activity by inducing synthetic lethality in cancers with germline Brca1/2 mutations. Conventional oral delivery of Talazoparib is associated with significant off-target effects, therefore we sought to develop new delivery systems in the form of an implant loaded with Talazoparib for localized, slow and sustained release of the drug at the tumor site in Brca1 -deficient breast cancer. Poly(lactic-co-glycolic acid) (PLGA) implants (0.8 mm diameter) loaded with subclinical dose (25 or 50 µg) Talazoparib were fabricated and characterized. In vitro studies with Brca1 -deficient W780 and W0069 breast cancer cells were conducted to test sensitivity to PARP inhibition. The in vivo therapeutic efficacy of Talazoparib implants was assessed following a one-time intratumoral injection in Brca1 Co/Co ;MMTV-Cre;p53 +/- mice and compared to drug-free implants and oral gavage. Immunohistochemistry studies were performed on tumor sections using PCNA and γ-H2AX staining. Sustained release of Talazoparib was observed over 28 days in vitro . Mice treated with Talazoparib implants showed statistically significant tumor growth inhibition compared to those receiving drug-free implants or free Talazoparib orally. Talazoparib implants were well-tolerated at both drug doses and resulted in less weight loss than oral gavage. PARP inhibition in mice treated with Talazoparib implants significantly increased double-stranded DNA damage and decreased tumor cell proliferation as shown by PCNA and γ-H2AX staining as compared to controls. These results demonstrate that localized and sustained delivery of Talazoparib via implants has potential to provide superior treatment outcomes at sub-clinical doses with minimal toxicity in patients with BRCA1 deficient tumors.

Sustainability in Transport Planning

DEFF Research Database (Denmark)

Gudmundsson, Henrik; Greve, Carsten

Contribution to session J: Joint University Sustainability Initiatives. This session will provide an inspiring overview of interdisciplinary research and teaching activities on sustainability bridging DTU, KU, and CBS, and introduce the joint collaboration Copenhagen Sustainability Initiative (COSI...

Practical appraisal of sustainable development-Methodologies for sustainability measurement at settlement level

International Nuclear Information System (INIS)

Moles, Richard; Foley, Walter; Morrissey, John; O'Regan, Bernadette

2008-01-01

This paper investigates the relationships between settlement size, functionality, geographic location and sustainable development. Analysis was carried out on a sample of 79 Irish settlements, located in three regional clusters. Two methods were selected to model the level of sustainability achieved in settlements, namely, Metabolism Accounting and Modelling of Material and Energy Flows (MA) and Sustainable Development Index Modelling. MA is a systematic assessment of the flows and stocks of material within a system defined in space and time. The metabolism of most settlements is essentially linear, with resources flowing through the urban system. The objective of this research on material and energy flows was to provide information that might aid in the development of a more circular pattern of urban metabolism, vital to sustainable development. In addition to MA, a set of forty indicators were identified and developed. These target important aspects of sustainable development: transport, environmental quality, equity and quality of life issues. Sustainability indices were derived through aggregation of indicators to measure dimensions of sustainable development. Similar relationships between settlement attributes and sustainability were found following both methods, and these were subsequently integrated to provide a single measure. Analysis identified those attributes of settlements preventing, impeding or promoting progress towards sustainability

Controlled drug release for tissue engineering.

Science.gov (United States)

Rambhia, Kunal J; Ma, Peter X

2015-12-10

Tissue engineering is often referred to as a three-pronged discipline, with each prong corresponding to 1) a 3D material matrix (scaffold), 2) drugs that act on molecular signaling, and 3) regenerative living cells. Herein we focus on reviewing advances in controlled release of drugs from tissue engineering platforms. This review addresses advances in hydrogels and porous scaffolds that are synthesized from natural materials and synthetic polymers for the purposes of controlled release in tissue engineering. We pay special attention to efforts to reduce the burst release effect and to provide sustained and long-term release. Finally, novel approaches to controlled release are described, including devices that allow for pulsatile and sequential delivery. In addition to recent advances, limitations of current approaches and areas of further research are discussed. Copyright © 2015 Elsevier B.V. All rights reserved.

Wrapping Our Brains around Sustainability

Directory of Open Access Journals (Sweden)

Mary Ann Curran

2009-03-01

Full Text Available As many of us begin to embrace the concept of sustainability, we realize that it is not simply something that we ‘do.’ Rather, sustainability is a destination that we aspire to reach with the selection of the sustainable pathways that we choose as we proceed along the journey. We are embarking on a new journey with the creation of Sustainability, an on-line, open access journal. As stated on the journal’s website, Sustainability is an international and cross-disciplinary scholarly journal of environmental, cultural, economic and social sustainability of human beings, which provides an advanced forum for studies that are related to sustainability and sustainable development. To genuinely wrap our brains around the impact that our actions have on the sustainability of our planet, we must first understand something of the big picture and have a firm grasp of the terminology. To help further clarify the elusive term ‘sustainability,’ without attempting to provide an exact definition, this paper outlines various, inter-related concepts and basic practices and approaches that are being used in the name of sustainability, including: traditional end-of-pipe control strategies, life cycle, environmental sustainability, urban sustainability, industrial ecology, business sustainability, sustainable supply chain systems, sustainability indicators and metrics, green chemistry and green engineering, design for the environment, sustainable buildings, eco-tourism, and renewable and sustainable energy and fuels.

New Insights into Drug Absorption from Oil Depots

NARCIS (Netherlands)

Kalicharan, R.W.

2017-01-01

Sustained delivery formulations are used in order to prolong the pharmacological activity of a drug. A commonly used parenteral sustained delivery formulation is an oil depot which consists of a solution of lipophilic molecules in a vegetable oil. These are normally administered either

Sustainability and Risk Disclosure: An Exploratory Study on Sustainability Reports

Directory of Open Access Journals (Sweden)

Elisa Truant

2017-04-01

Full Text Available Recent policy changes in sustainability reporting, such as the ones related to the new European Directive on non-financial disclosure (2014/95/EU, the standards issued by the American Sustainability Accounting Standard Board (SASB, the G4 guidelines issued by the Global Sustainability Standard Board (GSSB, and the framework of the International Integrated Reporting Council (IIRC stress the importance of extending the disclosure of ethical, social, and environmental risks within financial and social-environmental reporting. Institutional pressure has notably increased among organizations, in setting up risk management tools to understand sustainability risks within managerial and reporting practices. Given such institutional pressure, the corporate reaction in providing additional sustainability risk disclosure calls for attention and scrutiny. Therefore, this study aims at addressing such issues from an exploratory perspective. We based our analysis on a sample of large Italian organizations that issued sustainability disclosure in accordance with the Global Reporting Initiative (GRI, G4 guidelines, and we tested the relationship between their level of risk disclosure and other relevant variables. Consistently with the literature, we found that “experienced” sustainable reporters provide a significant volume of disclosure, and that disclosure quality on risk is positively influenced by their international presence and reporting experience. However, when accounting for specific risk-related areas of disclosure, only a few of them seem to adopt a managerial perspective linking strategy, risk metrics, and disclosure.

Naturapolyceutics: The Science of Utilizing Natural Polymers for Drug Delivery

Directory of Open Access Journals (Sweden)

Ndidi C. Ngwuluka

2014-05-01

Full Text Available Naturapolyceutics defines the emerging science and technology platform that blends natural polymers and pharmaceutics for the design and development of drug delivery systems. Natural polymers due to their biological properties, sustainability, chemical flexibility, human and eco-friendliness are promising in this field. As drug delivery advances, there will be need for more polymers. Given that polymers utilized in pharmaceuticals require regulatory approval, robust processes are undertaken to facilitate the production of pharmaceutical grade natural polymers. This review provides insight into the processes—extraction, purification, modifications and characterizations—involved in the eventual utilization of natural polymers for drug delivery. The versatility of natural polymers and particularly modified natural polymers in targeted drug delivery, micro-/nano-drug delivery, theranostics, BioMEMs and generally in research and development of highly efficient, safe and quality products is demonstrated. Natural polymers are polymers of today and tomorrow. Therefore, the shift to undertake training, extensive research and subsequent commercialization of more natural polymers—novel and underutilized—for drug delivery is now!

Formulation and evaluation of a sustained-release tablets of metformin hydrochloride using hydrophilic synthetic and hydrophobic natural polymers.

Science.gov (United States)

Wadher, K J; Kakde, R B; Umekar, M J

2011-03-01

Metformin hydrochloride has relatively short plasma half-life, low absolute bioavailability. The need for the administration two to three times a day when larger doses are required can decrease patient compliance. Sustained release formulation that would maintain plasma level for 8-12 h might be sufficient for daily dosing of metformin. Sustained release products are needed for metformin to prolong its duration of action and to improve patient compliances. The overall objective of this study was to develop an oral sustained release metformin hydrochloride tablet by using hydrophilic Eudragit RSPO alone or its combination with hydrophobic natural polymers Gum copal and gum damar as rate controlling factor. The tablets were prepared by wet granulation method. The in vitro dissolution study was carried out using USP 22 apparatus I, paddle method and the data was analysed using zero order, first order, Higuchi, Korsmeyer and Hixson-Crowell equations. The drug release study revealed that Eudragit RSPO alone was unable to sustain the drug release. Combining Eudragit with gum Copal and gum Damar sustained the drug release for more than 12 h. Kinetic modeling of in vitro dissolution profiles revealed the drug release mechanism ranges from diffusion controlled or Fickian transport to anomalous type or non-Fickian transport. Fitting the in vitro drug release data to Korsmeyer equation indicated that diffusion along with erosion could be the mechanism of drug release.

Fabrication and characterization of a rapid prototyped tissue engineering scaffold with embedded multicomponent matrix for controlled drug release

Directory of Open Access Journals (Sweden)

Chen M

2012-08-01

Full Text Available Muwan Chen,1,2 Dang QS Le,1,2 San Hein,2 Pengcheng Li,1 Jens V Nygaard,2 Moustapha Kassem,3 Jørgen Kjems,2 Flemming Besenbacher,2 Cody Bünger11Orthopaedic Research Lab, Aarhus University Hospital, Aarhus C, Denmark; 2Interdisciplinary Nanoscience Center (iNANO, Aarhus University, Aarhus C, Denmark; 3Department of Endocrinology and Metabolism, Odense University Hospital, Odense C, DenmarkAbstract: Bone tissue engineering implants with sustained local drug delivery provide an opportunity for better postoperative care for bone tumor patients because these implants offer sustained drug release at the tumor site and reduce systemic side effects. A rapid prototyped macroporous polycaprolactone scaffold was embedded with a porous matrix composed of chitosan, nanoclay, and β-tricalcium phosphate by freeze-drying. This composite scaffold was evaluated on its ability to deliver an anthracycline antibiotic and to promote formation of mineralized matrix in vitro. Scanning electronic microscopy, confocal imaging, and DNA quantification confirmed that immortalized human bone marrow-derived mesenchymal stem cells (hMSC-TERT cultured in the scaffold showed high cell viability and growth, and good cell infiltration to the pores of the scaffold. Alkaline phosphatase activity and osteocalcin staining showed that the scaffold was osteoinductive. The drug-release kinetics was investigated by loading doxorubicin into the scaffold. The scaffolds comprising nanoclay released up to 45% of the drug for up to 2 months, while the scaffold without nanoclay released 95% of the drug within 4 days. Therefore, this scaffold can fulfill the requirements for both bone tissue engineering and local sustained release of an anticancer drug in vitro. These results suggest that the scaffold can be used clinically in reconstructive surgery after bone tumor resection. Moreover, by changing the composition and amount of individual components, the scaffold can find application in other

Encapsulation of methotrexate loaded magnetic microcapsules for magnetic drug targeting and controlled drug release

Energy Technology Data Exchange (ETDEWEB)

Chakkarapani, Prabu [Department of Pharmaceutical Technology & Centre for Excellence in Nanobio Translational Research, Anna University, Bharathidasan Institute of Technology Campus, Tiruchirappalli 620024, Tamil Nadu (India); Subbiah, Latha, E-mail: lathasuba2010@gmail.com [Department of Pharmaceutical Technology & Centre for Excellence in Nanobio Translational Research, Anna University, Bharathidasan Institute of Technology Campus, Tiruchirappalli 620024, Tamil Nadu (India); Palanisamy, Selvamani; Bibiana, Arputha [Department of Pharmaceutical Technology & Centre for Excellence in Nanobio Translational Research, Anna University, Bharathidasan Institute of Technology Campus, Tiruchirappalli 620024, Tamil Nadu (India); Ahrentorp, Fredrik; Jonasson, Christian; Johansson, Christer [Acreo Swedish ICT AB, Arvid Hedvalls backe 4, SE-411 33 Göteborg (Sweden)

2015-04-15

We report on the development and evaluation of methotrexate magnetic microcapsules (MMC) for targeted rheumatoid arthritis therapy. Methotrexate was loaded into CaCO{sub 3}-PSS (poly (sodium 4-styrenesulfonate)) doped microparticles that were coated successively with poly (allylamine hydrochloride) and poly (sodium 4-styrenesulfonate) by layer-by-layer technique. Ferrofluid was incorporated between the polyelectrolyte layers. CaCO{sub 3}-PSS core was etched by incubation with EDTA yielding spherical MMC. The MMC were evaluated for various physicochemical, pharmaceutical parameters and magnetic properties. Surface morphology, crystallinity, particle size, zeta potential, encapsulation efficiency, loading capacity, drug release pattern, release kinetics and AC susceptibility studies revealed spherical particles of ~3 µm size were obtained with a net zeta potential of +24.5 mV, 56% encapsulation and 18.6% drug loading capacity, 96% of cumulative drug release obeyed Hixson-Crowell model release kinetics. Drug excipient interaction, surface area, thermal and storage stability studies for the prepared MMC was also evaluated. The developed MMC offer a promising mode of targeted and sustained release drug delivery for rheumatoid arthritis therapy. - Highlights: • Development of methotrexate magnetic microcapsules (MMC) by layer-by-layer method. • Characterization of physicochemical, pharmaceutical and magnetic properties of MMC. • Multiple layers of alternative polyelectrolytes prolongs methotrexate release time. • MMC is capable for targeted and sustained release rheumatoid arthritis therapy.

Gut microbiota sustains hematopoiesis

DEFF Research Database (Denmark)

Theilgaard-Mönch, Kim

2017-01-01

In this issue of Blood, Josefsdottir et al provide substantial evidence that commensal gut microbes regulate and sustain normal steady-state hematopoiesis.1......In this issue of Blood, Josefsdottir et al provide substantial evidence that commensal gut microbes regulate and sustain normal steady-state hematopoiesis.1...

Recent Advances in Edible Polymer Based Hydrogels as a Sustainable Alternative to Conventional Polymers.

Science.gov (United States)

Ali, Akbar; Ahmed, Shakeel

2018-06-26

The over increasing demand of eco-friendly materials to counter various problems, such as environmental issues, economics, sustainability, biodegradability, and biocompatibility, open up new fields of research highly focusing on nature-based products. Edible polymer based materials mainly consisting of polysaccharides, proteins, and lipids could be a prospective contender to handle such problems. Hydrogels based on edible polymer offer many valuable properties compared to their synthetic counterparts. Edible polymers can contribute to the reduction of environmental contamination, advance recyclability, provide sustainability, and thereby increase its applicability along with providing environmentally benign products. This review is highly emphasizing on toward the development of hydrogels from edible polymer, their classification, properties, chemical modification, and their potential applications. The application of edible polymer hydrogels covers many areas including the food industry, agricultural applications, drug delivery to tissue engineering in the biomedical field and provide more safe and attractive products in the pharmaceutical, agricultural, and environmental fields, etc.

Antimicrobial chemotherapy and Sustainable Development: The ...

African Journals Online (AJOL)

Antimicrobial chemotherapy and Sustainable Development: The past, The Current Trend, and the futu. ... Within the past half century, a wide variety of antimicrobial substances have been discovered, designed and synthesized; literally hundreds of drugs have been successfully used in some fashion over the years. Today ...

Sustainability at BPA 2013

Energy Technology Data Exchange (ETDEWEB)

None

2013-12-01

THIS IS THE THIRD YEAR BPA has reported on sustainability program accomplishments. The report provides an opportunity to review progress made on sustainability initiatives, evaluate how far we have come and how much we can improve. The program has demonstrated maturation as the concepts of sustainability and resource conservation are communicated and understood. The sustainability program started as an employee-driven “grass roots” effort in 2010. Sustainability is becoming a consideration in how work is performed. The establishment of several policies supporting sustainability efforts proves the positive progress being made. In 2009, BPA became a founder and member of The Climate Registry, a nonprofit collaboration that sets standards to calculate, verify and report greenhouse gas emissions. This year, BPA completed and published our Greenhouse Gas inventory for the years of 2009, 2010 and 2011. The 2012 inventory is currently in the process of third-party verification and scheduled for public release in January 2014. These inventories provide a concrete measure of the progress we are making.

Nanotechnology-based drug delivery treatments and specific targeting therapy for age-related macular degeneration

Directory of Open Access Journals (Sweden)

Tai-Chi Lin

2015-11-01

Full Text Available Nanoparticles combined with cells, drugs, and specially designed genes provide improved therapeutic efficacy in studies and clinical setting, demonstrating a new era of treatment strategy, especially in retinal diseases. Nanotechnology-based drugs can provide an essential platform for sustaining, releasing and a specific targeting design to treat retinal diseases. Poly-lactic-co-glycolic acid is the most widely used biocompatible and biodegradable polymer approved by the Food and Drug Administration. Many studies have attempted to develop special devices for delivering small-molecule drugs, proteins, and other macromolecules consistently and slowly. In this article, we first review current progress in the treatment of age-related macular degeneration. Then, we discuss the function of vascular endothelial growth factor (VEGF and the pharmacological effects of anti-VEGF-A antibodies and soluble or modified VEGF receptors. Lastly, we summarize the combination of antiangiogenic therapy and nanomedicines, and review current potential targeting therapy in age-related macular degeneration.

Incorporation of ciprofloxacin/laponite in polycaprolactone electrospun nanofibers: drug release and antibacterial studies

Science.gov (United States)

Kalwar, Kaleemullah; Zhang, Xuan; Aqeel Bhutto, Muhammad; Dali, Li; Shan, Dan

2017-12-01

Electrospun nanofibers with sustained drug release are a challenge but it can be improved by using hydrophobic polymer. Polycaprolactone (PCL) is a hydrophobic and biocompatible polymer. In this work, we have proposed a drug release mechanism by preparation of ciprofloxacin (Cip)/Laponite (LAP) complex and then incorporation in PCL nanofibers through electrospinning technique. In addition, drug incorporation was confirmed by FTIR and morphology of electrospun nanofibers was revealed by SEM. Drug loading was measured by using spectrophotometer. PCL/LAP/Cip NFs proved sustained drug release as compared to PCL NFs and PCL/Cip NFs. Furthermore, PCL/LAP/Cip NFs were used as antimicrobial agent and higher effect measured.

Should We Provide Life-Sustaining Treatments to Patients with Permanent Loss of Cognitive Capacities?

Directory of Open Access Journals (Sweden)

Ofra G. Golan

2012-07-01

Full Text Available A very troubling issue for health care systems today is that of life-sustaining treatment for patients who have permanently lost their cognitive capacities. These include patients in persistent vegetative state (PVS, or minimally conscious state (MCS, as well as a growing population of patients at the very end stage of dementia. These patients are totally dependent on life-sustaining treatments and are, actually, kept alive “artificially.” This phenomenon raises doubts as to the ethics of sustaining the life of patients who have lost their consciousness and cognitive capacities, and whether there is a moral obligation to do so. The problem is that the main facts concerning the experiences and well-being of such patients and their wishes are unknown. Hence the framework of the four principles—beneficence, non-maleficence, autonomy, and justice—is not applicable in these cases; therefore we examined solidarity as another moral value to which we may resort in dealing with this dilemma. This article shows that the source of the dilemma is the social attitudes towards loss of cognitive capacities, and the perception of this state as loss of personhood. Consequently, it is suggested that the principle of solidarity—which both sets an obligation to care for the worst-off, and can be used to identify obligations that appeal to an ethos of behavior—can serve as a guiding principle for resolving the dilemma. The value of solidarity can lead society to care for these patients and not deny them basic care and life-sustaining treatment when appropriate.

Ophthalmic Drug Delivery Systems for Antibiotherapy—A Review

Science.gov (United States)

Dubald, Marion; Bourgeois, Sandrine; Andrieu, Véronique; Fessi, Hatem

2018-01-01

The last fifty years, ophthalmic drug delivery research has made much progress, challenging scientists about the advantages and limitations of this drug delivery approach. Topical eye drops are the most commonly used formulation in ocular drug delivery. Despite the good tolerance for patients, this topical administration is only focus on the anterior ocular diseases and had a high precorneal loss of drugs due to the tears production and ocular barriers. Antibiotics are popularly used in solution or in ointment for the ophthalmic route. However, their local bioavailability needs to be improved in order to decrease the frequency of administrations and the side effects and to increase their therapeutic efficiency. For this purpose, sustained release forms for ophthalmic delivery of antibiotics were developed. This review briefly describes the ocular administration with the ocular barriers and the currently topical forms. It focuses on experimental results to bypass the limitations of ocular antibiotic delivery with new ocular technology as colloidal and in situ gelling systems or with the improvement of existing forms as implants and contact lenses. Nanotechnology is presently a promising drug delivery way to provide protection of antibiotics and improve pathway through ocular barriers and deliver drugs to specific target sites. PMID:29342879

Ophthalmic Drug Delivery Systems for Antibiotherapy—A Review

Directory of Open Access Journals (Sweden)

Marion Dubald

2018-01-01

Full Text Available The last fifty years, ophthalmic drug delivery research has made much progress, challenging scientists about the advantages and limitations of this drug delivery approach. Topical eye drops are the most commonly used formulation in ocular drug delivery. Despite the good tolerance for patients, this topical administration is only focus on the anterior ocular diseases and had a high precorneal loss of drugs due to the tears production and ocular barriers. Antibiotics are popularly used in solution or in ointment for the ophthalmic route. However, their local bioavailability needs to be improved in order to decrease the frequency of administrations and the side effects and to increase their therapeutic efficiency. For this purpose, sustained release forms for ophthalmic delivery of antibiotics were developed. This review briefly describes the ocular administration with the ocular barriers and the currently topical forms. It focuses on experimental results to bypass the limitations of ocular antibiotic delivery with new ocular technology as colloidal and in situ gelling systems or with the improvement of existing forms as implants and contact lenses. Nanotechnology is presently a promising drug delivery way to provide protection of antibiotics and improve pathway through ocular barriers and deliver drugs to specific target sites.

Indicators for sustainable tourism: The case of Cambodia

Directory of Open Access Journals (Sweden)

Nhep Tinat

2015-03-01

Full Text Available Most research on tourism in Cambodia so far has focused on growth. There is very limited research on indicators for sustainability. A failure to create indicators for sustainable tourism may lead to short-term growth but the country will suffer in the long run. Sustainability really matters in tourism especially in a new destination like Cambodia. Cambodia has no clear indicators determining tourism sustainability. Cambodia’s tourism is remarkably flourishing, but behind this growth some challenges exist: Cultural and environmental impacts, economic leakage, sex tourism, drug trafficking and disease transmission. These concern tourism sustainability. This research intends to fill a significant gap regarding challenges hampering sustainable tourism, particularly creating indicators, by studying the activities of Cambodia’s tourism. The aim is to contribute to developing more comprehensive policies and measures that address problems by drawing on the activities and perspectives of the country’s tourism stakeholders: These include public and private actors, NGOs, local people and tourists.

Design and Evaluation of Chitosan-Based Novel pHSensitive Drug ...

African Journals Online (AJOL)

Design and Evaluation of Chitosan-Based Novel pHSensitive Drug Carrier for Sustained ... Scanning electron microscopy(SEM),Raman spectroscopy for particle size analysis. Swelling ratio, Effect of drug loading on encapsulation efficiency

Advances in nanotechnology-based carrier systems for targeted delivery of bioactive drug molecules with special emphasis on immunotherapy in drug resistant tuberculosis - a critical review.

Science.gov (United States)

Singh, Jagdeep; Garg, Tarun; Rath, Goutam; Goyal, Amit K

2016-06-01

From the early sixteenth and seventeenth centuries to the present day of life, tuberculosis (TB) still is a global health threat with some new emergence of resistance. This type of emergence poses a vital challenge to control TB cases across the world. Mortality and morbidity rates are high due to this new face of TB. The newer nanotechnology-based drug-delivery approaches involving micro-metric and nano-metric carriers are much needed at this stage. These delivery systems would provide more advantages over conventional systems of treatment by producing enhanced therapeutic efficacy, uniform distribution of drug molecule to the target site, sustained and controlled release of drug molecules and lesser side effects. The main aim to develop these novel drug-delivery systems is to improve the patient compliance and reduce therapy time. This article reviews and elaborates the new concepts and drug-delivery approaches for the treatment of TB involving solid-lipid particulate drug-delivery systems (solid-lipid micro- and nanoparticles, nanostructured lipid carriers), vesicular drug-delivery systems (liposomes, niosomes and liposphere), emulsion-based drug-delivery systems (micro and nanoemulsion) and some other novel drug-delivery systems for the effective treatment of tuberculosis and role of immunomodulators as an adjuvant therapy for management of MDR-TB and XDR-TB.

Multinationals' accountability on sustainability: the evolution of third-party assurance of sustainability reports

OpenAIRE

Perego, P.; Kolk, A.

2012-01-01

In this article we explore how multinational corporations (MNCs) adopt assurance practices to develop and sustain organizational accountability for sustainability. Using a panel of Fortune Global 250 firms over a period of 10 years, we document the diffusion patterns of third-party assurance of sustainability reports. We specifically investigate how evolving auditing practices, namely diversity of assurance standards and type of assurance providers, shape the quality of sustainability assuran...

Characteristics of substance abuse treatment programs providing services for HIV/AIDS, hepatitis C virus infection, and sexually transmitted infections: the National Drug Abuse Treatment Clinical Trials Network.

Science.gov (United States)

Brown, Lawrence S; Kritz, Steven Allan; Goldsmith, R Jeffrey; Bini, Edmund J; Rotrosen, John; Baker, Sherryl; Robinson, Jim; McAuliffe, Patrick

2006-06-01

Illicit drug users sustain the epidemics of human immunodeficiency virus (HIV)/acquired immunodeficiency syndrome (AIDS), hepatitis C (HCV), and sexually transmitted infections (STIs). Substance abuse treatment programs present a major intervention point in stemming these epidemics. As a part of the "Infections and Substance Abuse" study, established by the National Drug Abuse Treatment Clinical Trials Network, sponsored by National Institute on Drug Abuse, three surveys were developed; for treatment program administrators, for clinicians, and for state and District of Columbia health and substance abuse department administrators, capturing service availability, government mandates, funding, and other key elements related to the three infection groups. Treatment programs varied in corporate structure, source of revenue, patient census, and medical and non-medical staffing; medical services, counseling services, and staff education targeted HIV/AIDS more often than HCV or STIs. The results from this study have the potential to generate hypotheses for further health services research to inform public policy.

Triple-Component Drug-Loaded Nanocomposites Prepared Using a Modified Coaxial Electrospinning

Directory of Open Access Journals (Sweden)

Wei Qian

2013-01-01

Full Text Available Triple-component nanocomposites for improved sustained drug release profiles are successfully fabricated through a modified coaxial electrospinning process, in which only organic solvent N,N-dimethylacetamide was used as sheath fluid. Using polyacrylonitrile (PAN as filament-forming matrix, ibuprofen (IBU as functional ingredient, and polyvinylpyrrolidone (PVP as the additional component, the IBU/PVP/PAN triple-component nanocomposites had uniform structure and an average diameter of 620±120 nm and 650±120 nm when the contents of PVP in the nanofibers were 10.5% and 22.7%, respectively. The optimal sheath-to-core flow rate ratio was 0.11 under a total sheath and core fluid flow rate of 1.0 mL/h. Compared with the IBU/PAN composite nanofibers, the triple-component composites could release 92.1% and 97.8% of the contained IBU, significantly larger than a value of 73.4% from the former. The inclusion of PVP in the IBU/PAN could effectively avoid the entrapment of IBU in the insoluble PAN molecules, facilitating the in vitro release of IBU. The modified coaxial process and the resulted multiple component nanocomposites would provide new way for developing novel drug sustained materials and transdermal drug delivery systems.

Drug delivery into microneedle-porated nails from nanoparticle reservoirs.

Science.gov (United States)

Chiu, Wing Sin; Belsey, Natalie A; Garrett, Natalie L; Moger, Julian; Price, Gareth J; Delgado-Charro, M Begoña; Guy, Richard H

2015-12-28

This study demonstrates the potential of polymeric nanoparticles as drug reservoirs for sustained topical drug delivery into microneedle-treated human nail. Laser scanning confocal microscopy was used to image the delivery of a fluorescent model compound from nanoparticles into the nail. A label-free imaging technique, stimulated Raman scattering microscopy, was applied, in conjunction with two-photon fluorescence imaging, to probe the disposition of nanoparticles and an associated lipophilic 'active' in a microneedle-porated nail. The results provide clear evidence that the nanoparticles function as immobile reservoirs, sequestered on the nail surface and in the microneedle-generated pores, from which the active payload can be released and diffuse laterally into the nail over an extended period of time. Copyright © 2015 Elsevier B.V. All rights reserved.

Can Parents Provide Brief Intervention Services to Their Drug-Abusing Teenager?

Science.gov (United States)

Winters, Ken C.

2013-01-01

The importance of parents as “interventionists” is supported by reviews of the treatment literature (e.g., Smit, Verdurmen, Monshouwer, & Smit, 2008; Winters, Botzet, Fahnhorst, & Koskey, 2009) as well as the emerging science that home-based initiatives by parents can contribute to desired health changes in adolescents (Fearnow, Chassin, Presson, & Sherman, 1998; Jackson & Dickinson, 2006). Parental influences on an adolescent can include reducing initiation, as well as altering its maintenance if it has started. This paper describes a project aimed helping parents to deal with a teenager who has already started to use alcohol or other drugs. Home Base is a home-based, parent-led program aimed at reversing the trajectory of drug use in an already drug-using adolescent. The program’s content is organized around motivational enhancement and cognitive behavioral techniques. The ongoing study will also be discussed. PMID:25866459

Engineering of polymer-surfactant nanoparticles of doxycycline hydrochloride for ocular drug delivery.

Science.gov (United States)

Pokharkar, Varsha; Patil, Vikram; Mandpe, Leenata

2015-01-01

Physiologic barriers of the eye, short precorneal drug residence time and poor corneal penetration are the few reasons for reduced ocular bioavailability. This study was aimed to develop novel polymer-surfactant nanoparticles of hydrophilic drug doxycycline hydrochloride (DXY) to improve precorneal residence time and drug penetration. Nanoparticles were formulated using emulsion cross-linking method and the formulation was optimized using factorial design. The prepared formulation was characterized for particle size, ζ potential, encapsulation efficiency, in vitro drug release and ex vivo drug diffusion studies. The antibacterial activity studies were also carried out against Escherichia coli and Staphylococcus aureus using the cup-plate method. In vivo eye irritation study was carried out by a modified Draize test in rabbits. The particle size was found to be in the range of 331-850 nm. About 45-80% of the drug was found to be encapsulated in the nanoparticles. In vitro release demonstrated sustained release profile. Lower flux values in case of nanoparticles as compared to DXY pure drug solution in ex vivo diffusion studies confirmed the sustained release. The nanoparticles were found to be significantly effective (p nanoparticles in both the E. coli and S. aureus strains. The formulation was found to be stable over entire stability period. The developed formulation is safe and suitable for sustained ocular drug delivery.

Sustainable economic structures

NARCIS (Netherlands)

Dellink, R.B.; Bennis, M.; Verbruggen, H.

1999-01-01

The paper introduces four scenarios for sustainable economic structures in the Netherlands for 2030. The aim of this paper is to provide possible answers to what a sustainable future might look like in terms of alternative economic structures. To this end, an empirical economy-ecology model is

Diabetes Drug Prescription Pattern and Awareness Among Health Care Providers in Sub-Himalayan Region of India: A Population Based Study.

Science.gov (United States)

Mokta, Jatinder; Mokta, Kiran; Ranjan, Asha; Joshi, Ivan; Garg, Mahak

2017-05-01

To determine the pattern of diabetic drug prescription and awareness about diabetes among primary health providers in the rural areas of Himachal Pradesh situated in the western Himalayas at an elevation range from 350 meters (1,148ft) to 6900 meters (22,966ft) above sea level. Study was conducted in 20 rural areas of Himachal Pradesh, located 50 to 400 Km from state capital, at 2200 to 10,000 feet altitude. Non-pregnant diabetic adults were surveyed through 31 diabetic camps. Detailed history, weight, height, waist circumference, body mass index recorded. Fasting or random blood glucose, glycated hemoglobin, lipid profile measured and blood pressure recorded. 894 diabetic patients were included in the study (59.83% male) with the mean age of 52.94±6.78 years. Two in three patients were on oral hypoglycemic agents (OHAs), and one in three on alternative approaches for diabetes control. Among OHAs, sulphonylureas (SU) were the most commonly prescribed oral agents in 76.09% of patients followed by metformin in 23.87%. Glibenclamide was the most commonly prescribed SU in 44.60%. Amlodipine and atenolol was the commonest anti-hypertensive drug prescribed in 77.85% either in combination or as individual drug. Only 10.59% were on lipid lowering therapy. For primary care providers glycemic target was the mainstay of diabetes treatment with little emphasis on blood pressure control and no emphasis on lipid reduction. Sulphonylureas were the commonest anti-diabetic drug prescribed by the primary care providers followed by metformin. Insulin was prescribed to 2.23% only. Combination of amlodipine and atenolol was the commonest anti-hypertensive drugs prescribed and only 10% of patients were prescribed statin.

A gelatin composite scaffold strengthened by drug-loaded halloysite nanotubes.

Science.gov (United States)

Ji, Lijun; Qiao, Wei; Zhang, Yuheng; Wu, Huayu; Miao, Shiyong; Cheng, Zhilin; Gong, Qianming; Liang, Ji; Zhu, Aiping

2017-09-01

Mechanical properties and anti-infection are two of the most concerned issues for artificial bone grafting materials. Bone regeneration porous scaffolds with sustained drug release were developed by freeze-drying the mixture of nanosized drug-loaded halloysite nanotubes (HNTs) and gelatin. The scaffolds showed porous structure and excellent biocompatibility. The mechanical properties of the obtained composite scaffolds were enhanced significantly by HNTs to >300%, comparing to those of gelatin scaffold, and match to those of natural cancellous bones. The ibuprofen-loaded HNTs incorporated in the scaffolds allowed extended drug release over 100h, comparing to 8h when directly mixed the drug into the gelatin scaffold. The biological properties of the composite scaffolds were investigated by culturing MG63 cells on them. The HNTs/gelatin scaffolds with excellent mechanical properties and sustained drug release could be a promising artificial bone grating material. Copyright © 2017 Elsevier B.V. All rights reserved.

DRUG MANAGEMENT REVIEWS IN DISTRICT DRUG MANAGEMENT UNIT AND GENERAL HOSPITAL

Directory of Open Access Journals (Sweden)

Max Joseph Herman

2009-12-01

Full Text Available Drug is one of the essential elements in healthcare that should be effectively and efficiently managed. Following thedecentralization in 2001 in Indonesia, drug management has changed in district drug management units and also in District General Hospitals. Certainly this condition influences the sustainability of drug access in primary health care such as in Community Health Center and District General Hospital, especially in drug financing policy. A cross sectional descriptive study to obtain information on drug management in public healthcare in district had been carried out between July and December 2006 in 10 District Public Drug Management Units from 10 district health offices and 9 district general hospitals as samples. Data were collected by interviewing heads of Drug Section in District Health Offices and heads of Hospital Pharmacies using structured questionnaires and observing drug storage in District Drug Management Units, Community Health Centers, and Hospital Pharmacies. Results of the study show that drug planning in District Health Offices and General Hospitals did not meet the basic real need in some districts nor District Hospitals. The minimum health service standards had no been achieved yet. Furthermore, drug procurement, storage and recording as well as reporting was not good enough either, such as shown by the existence of expired drugs. Lead time for drug delivery to community health centers in some districts was longer than the average of lead time in the past 3 years.

Clinical Drug-Drug Pharmacokinetic Interaction Potential of Sucralfate with Other Drugs

DEFF Research Database (Denmark)

Sulochana, Suresh P; Syed, Muzeeb; Chandrasekar, Devaraj V

2016-01-01

of drugs. This review covers several category of drugs such as non-steroidal anti-inflammatory drugs, fluoroquinolones, histamine H2-receptor blockers, macrolides, anti-fungals, anti-diabetics, salicylic acid derivatives, steroidal anti-inflammatory drugs and provides pharmacokinetic data summary along...

Supplementary Material for: Mycobacterium tuberculosis whole genome sequencing and protein structure modelling provides insights into anti-tuberculosis drug resistance

KAUST Repository

Phelan, Jody

2016-01-01

Abstract Background Combating the spread of drug resistant tuberculosis is a global health priority. Whole genome association studies are being applied to identify genetic determinants of resistance to anti-tuberculosis drugs. Protein structure and interaction modelling are used to understand the functional effects of putative mutations and provide insight into the molecular mechanisms leading to resistance. Methods To investigate the potential utility of these approaches, we analysed the genomes of 144 Mycobacterium tuberculosis clinical isolates from The Special Programme for Research and Training in Tropical Diseases (TDR) collection sourced from 20 countries in four continents. A genome-wide approach was applied to 127 isolates to identify polymorphisms associated with minimum inhibitory concentrations for first-line anti-tuberculosis drugs. In addition, the effect of identified candidate mutations on protein stability and interactions was assessed quantitatively with well-established computational methods. Results The analysis revealed that mutations in the genes rpoB (rifampicin), katG (isoniazid), inhA-promoter (isoniazid), rpsL (streptomycin) and embB (ethambutol) were responsible for the majority of resistance observed. A subset of the mutations identified in rpoB and katG were predicted to affect protein stability. Further, a strong direct correlation was observed between the minimum inhibitory concentration values and the distance of the mutated residues in the three-dimensional structures of rpoB and katG to their respective drugs binding sites. Conclusions Using the TDR resource, we demonstrate the usefulness of whole genome association and convergent evolution approaches to detect known and potentially novel mutations associated with drug resistance. Further, protein structural modelling could provide a means of predicting the impact of polymorphisms on drug efficacy in the absence of phenotypic data. These approaches could ultimately lead to novel

Nanoparticles laden in situ gelling system for ocular drug targeting

Directory of Open Access Journals (Sweden)

Divya Kumar

2013-01-01

Full Text Available Designing an ophthalmic drug delivery system is one of the most difficult challenges for the researchers. The anatomy and physiology of eye create barriers like blinking which leads to the poor retention time and penetration of drug moiety. Some conventional ocular drug delivery systems show shortcomings such as enhanced pre-corneal elimination, high variability in efficiency, and blurred vision. To overcome these problems, several novel drug delivery systems such as liposomes, nanoparticles, hydrogels, and in situ gels have been developed. In situ-forming hydrogels are liquid upon instillation and undergo phase transition in the ocular cul-de-sac to form viscoelastic gel and this provides a response to environmental changes. In the past few years, an impressive number of novel temperature, pH, and ion-induced in situ-forming systems have been reported for sustain ophthalmic drug delivery. Each system has its own advantages and drawbacks. Thus, a combination of two drug delivery systems, i.e., nanoparticles and in situ gel, has been developed which is known as nanoparticle laden in situ gel. This review describes every aspects of this novel formulation, which present the readers an exhaustive detail and might contribute to research and development.

Chitosan nanoparticles for targeting and sustaining minoxidil sulphate delivery to hair follicles.

Science.gov (United States)

Matos, Breno Noronha; Reis, Thaiene Avila; Gratieri, Taís; Gelfuso, Guilherme Martins

2015-04-01

This work developed minoxidil sulphate-loaded chitosan nanoparticles (MXS-NP) for targeted delivery to hair follicles, which could sustain drug release and improve the topical treatment of alopecia. Chitosan nanoparticles were obtained using low-molecular weight chitosan and tripolyphosphate as crosslink agent. MXS-NP presented a monomodal distribution with hydrodynamic diameter of 235.5 ± 99.9 nm (PDI of 0.31 ± 0.01) and positive zeta potential (+38.6 ± 6.0 mV). SEM analysis confirmed nanoparticles average size and spherical shape. A drug loading efficiency of 73.0 ± 0.3% was obtained with polymer:drug ratio of 1:1 (w/w). Drug release through cellulose acetate membranes from MXS-NP was sustained in about 5 times in comparison to the diffusion rate of MXS from the solution (188.9 ± 6.0 μg/cm(2)/h and 35.4 ± 1.8 μg/cm(2)/h). Drug permeation studies through the skin in vitro, followed by selective recovery of MXS from the hair follicles, showed that MXS-NP application resulted in a two-fold MXS increase into hair follicles after 6h in comparison to the control solution (5.9 ± 0.6 μg/cm(2) and 2.9 ± 0.8 μg/cm(2)). MXS-loading in nanoparticles appears as a promising and easy strategy to target and sustain drug delivery to hair follicles, which may improve the topical treatment of alopecia. Copyright © 2015 Elsevier B.V. All rights reserved.

Modeling Drug-Carrier Interaction in the Drug Release from Nanocarriers

Directory of Open Access Journals (Sweden)

Like Zeng

2011-01-01

Full Text Available Numerous nanocarriers of various compositions and geometries have been developed for the delivery and release of therapeutic and imaging agents. Due to the high specific surface areas of nanocarriers, different mechanisms such as ion pairing and hydrophobic interaction need to be explored for achieving sustained release. Recently, we developed a three-parameter model that considers reversible drug-carrier interaction and first-order drug release from liposomes. A closed-form analytical solution was obtained. Here, we further explore the ability of the model to capture the release of bioactive molecules such as drugs and growth factors from various nanocarriers. A parameter study demonstrates that the model is capable of resembling major categories of drug release kinetics. We further fit the model to 60 sets of experimental data from various drug release systems, including nanoparticles, hollow particles, fibers, and hollow fibers. Additionally, bootstrapping is used to evaluate the accuracy of parameter determination and validate the model in selected cases. The simplicity and universality of the model and the clear physical meanings of each model parameter render the model useful for the design and development of new drug delivery systems.

The Sustainability Cycle and Loop: models for a more unified understanding of sustainability.

Science.gov (United States)

Hay, Laura; Duffy, Alex; Whitfield, R I

2014-01-15

In spite of the considerable research on sustainability, reports suggest that we are barely any closer to a more sustainable society. As such, there is an urgent need to improve the effectiveness of human efforts towards sustainability. A clearer and more unified understanding of sustainability among different people and sectors could help to facilitate this. This paper presents the results of an inductive literature investigation, aiming to develop models to explain the nature of sustainability in the Earth system, and how humans can effectively strive for it. The major contributions are two general and complementary models, that may be applied in any context to provide a common basis for understanding sustainability: the Sustainability Cycle (S-Cycle), and the Sustainability Loop (S-Loop). Literature spanning multiple sectors is examined from the perspective of three concepts, emerging as significant in relation to our aim. Systems are shown to provide the context for human action towards sustainability, and the nature of the Earth system and its sub-systems is explored. Activities are outlined as a fundamental target that humans need to sustain, since they produce the entities both needed and desired by society. The basic behaviour of activities operating in the Earth system is outlined. Finally, knowledge is positioned as the driver of human action towards sustainability, and the key components of knowledge involved are examined. The S-Cycle and S-Loop models are developed via a process of induction from the reviewed literature. The S-Cycle describes the operation of activities in a system from the perspective of sustainability. The sustainability of activities in a system depends upon the availability of resources, and the availability of resources depends upon the rate that activities consume and produce them. Humans may intervene in these dynamics via an iterative process of interpretation and action, described in the S-Loop model. The models are briefly

The Sustainability Cone - A holistic framework to integrate sustainability thinking into manufacturing

DEFF Research Database (Denmark)

Rödger, Jan-Markus; Bey, Niki; Alting, Leo

2016-01-01

Integrating sustainability into manufacturing is a multifaceted endeavour. Global sustainability aspects and specific manufacturing success factors have to be combined with life cycle thinking in order to get the holistic view on manufacturing which is needed to make truly sustainability-oriented......Integrating sustainability into manufacturing is a multifaceted endeavour. Global sustainability aspects and specific manufacturing success factors have to be combined with life cycle thinking in order to get the holistic view on manufacturing which is needed to make truly sustainability...... - as the missing link which closes these gaps by providing necessary holistic and consistent overview while being aligned with established stage-gate project execution models, thus ensuring practical applicability as shown for a highly automated production cell. The paper shows how to apply life cycle target...

Enteric-coated sustained-release nanoparticles by coaxial electrospray: preparation, characterization, and in vitro evaluation

Science.gov (United States)

Hao, Shilei; Wang, Bochu; Wang, Yazhou; Xu, Yingqian

2014-02-01

Enteric-coated formulations can delay the release of drugs until they have passed through the stomach. However, high concentration of drugs caused by rapidly released in the small intestine leads to the intestinal damage, and frequent administration would increase the probability of missing medication and reduce the patient compliance. To solve the above-mentioned problems, aspirin-loaded enteric-coated sustained-release nanoparticles with core-shell structure were prepared via one-step method using coaxial electrospray in this study. Eudragit L100-55 as pH-sensitive polymer and Eudragit RS as sustained-release polymer were used for the outer coating and inner core of the nanoparticles, respectively. The maximum loading capacity of nanoparticles was 23.66 % by changing the flow rate ratio of outer/inner solutions, and the entrapment efficiency was nearly 100 %. Nanoparticles with core-shell structure were observed via fluorescence microscope and transmission electron microscope. And pH-sensitive and sustained drug release profiles were observed in the media with different pH values (1.2 and 6.8). In addition, mild cytotoxicity in vitro was detected, and the nanoparticles could be taken up by Caco-2 cells within 1.0 h in cellular uptake study. These results indicate that prepared enteric-coated sustained-release nanoparticles would be a more safety and effective carrier for oral drug delivery.

Low Non-structured Antiretroviral Therapy Interruptions in HIV-Infected Persons Who Inject Drugs Receiving Multidisciplinary Comprehensive HIV Care at an Outpatient Drug Abuse Treatment Center.

Science.gov (United States)

Vallecillo, Gabriel; Mojal, Sergio; Roquer, Albert; Samos, Pilar; Luque, Sonia; Martinez, Diana; Martires, Paula Karen; Torrens, Marta

2016-05-01

Continuous HIV treatment is necessary to ensure successful combined antiretroviral therapy (cART). The aim of this study was to evaluate the incidence of patient-initiated non-structured treatment interruptions in HIV-infected persons who inject drugs and who received a multidisciplinary comprehensive program, including medical HIV care, drug-dependence treatment and psychosocial support, at a drug outpatient addiction center. Non-structured treatment interruptions were defined as ≥30 consecutive days off cART without medical indication. During a median follow-up of 53.8 months, 37/132 (28 %) patients experienced the first non-structured treatment interruptions. The cumulative probability of cART interruption at 5 years was 31.2 % (95 % CI 22.4-40.0). Current drug use injection ≥1/day (HR 14.77; 95 % CI 5.90-36.96) and cART naive patients (HR 0.35, 95 % CI 0.14-0.93) were predictive factors for non-structured treatment interruptions. HIV care provided at a drug addiction center is a useful strategy to sustain continuous cART, however, drug abstinence is essential for the long-term maintenance of cART.

Providing data science support for systems pharmacology and its implications to drug discovery.

Science.gov (United States)

Hart, Thomas; Xie, Lei

2016-01-01

The conventional one-drug-one-target-one-disease drug discovery process has been less successful in tracking multi-genic, multi-faceted complex diseases. Systems pharmacology has emerged as a new discipline to tackle the current challenges in drug discovery. The goal of systems pharmacology is to transform huge, heterogeneous, and dynamic biological and clinical data into interpretable and actionable mechanistic models for decision making in drug discovery and patient treatment. Thus, big data technology and data science will play an essential role in systems pharmacology. This paper critically reviews the impact of three fundamental concepts of data science on systems pharmacology: similarity inference, overfitting avoidance, and disentangling causality from correlation. The authors then discuss recent advances and future directions in applying the three concepts of data science to drug discovery, with a focus on proteome-wide context-specific quantitative drug target deconvolution and personalized adverse drug reaction prediction. Data science will facilitate reducing the complexity of systems pharmacology modeling, detecting hidden correlations between complex data sets, and distinguishing causation from correlation. The power of data science can only be fully realized when integrated with mechanism-based multi-scale modeling that explicitly takes into account the hierarchical organization of biological systems from nucleic acid to proteins, to molecular interaction networks, to cells, to tissues, to patients, and to populations.

Controlling fungal biofilms with functional drug delivery denture biomaterials.

Science.gov (United States)

Wen, Jianchuan; Jiang, Fuguang; Yeh, Chih-Ko; Sun, Yuyu

2016-04-01

Candida-associated denture stomatitis (CADS), caused by colonization and biofilm-formation of Candida species on denture surfaces, is a significant clinical concern. We show here that modification of conventional denture materials with functional groups can significantly increase drug binding capacity and control drug release rate of the resulting denture materials for potentially managing CADS. In our approach, poly(methyl methacrylate) (PMMA)-based denture resins were surface grafted with three kinds of polymers, poly(1-vinyl-2-pyrrolidinone) (PNVP), poly(methacrylic acid) (PMAA), and poly(2-hydroxyethyl methacrylate) (PHEMA), through plasma-initiated grafting polymerization. With a grafting yield as low as 2 wt%, the three classes of new functionalized denture materials showed significantly higher drug binding capacities toward miconazole, a widely used antifungal drug, than the original PMMA denture resin control, leading to sustained drug release and potent biofilm-controlling effects against Candida. Among the three classes of functionalized denture materials, PNVP-grafted resin provided the highest miconazole binding capability and the most powerful antifungal and biofilm-controlling activities. Drug binding mechanisms were studied. These results demonstrated the importance of specific interactions between drug molecules and functional groups on biomaterials, shedding lights on future design of CADS-managing denture materials and other related devices for controlled drug delivery. Copyright © 2015 Elsevier B.V. All rights reserved.

The relationship between settlement population size and sustainable development measured by two sustainability metrics

International Nuclear Information System (INIS)

O'Regan, Bernadette; Morrissey, John; Foley, Walter; Moles, Richard

2009-01-01

This paper reports on a study of the relative sustainability of 79 Irish villages, towns and a small city (collectively called 'settlements') classified by population size. Quantitative data on more than 300 economic, social and environmental attributes of each settlement were assembled into a database. Two aggregated metrics were selected to model the relative sustainability of settlements: Ecological Footprint (EF) and Sustainable Development Index (SDI). Subsequently these were aggregated to create a single Combined Sustainable Development Index. Creation of this database meant that metric calculations did not rely on proxies, and were therefore considered to be robust. Methods employed provided values for indicators at various stages of the aggregation process. This allowed both the first reported empirical analysis of the relationship between settlement sustainability and population size, and the elucidation of information provided at different stages of aggregation. At the highest level of aggregation, settlement sustainability increased with population size, but important differences amongst individual settlements were masked by aggregation. EF and SDI metrics ranked settlements in differing orders of relative sustainability. Aggregation of indicators to provide Ecological Footprint values was found to be especially problematic, and this metric was inadequately sensitive to distinguish amongst the relative sustainability achieved by all settlements. Many authors have argued that, for policy makers to be able to inform planning decisions using sustainability indicators, it is necessary that they adopt a toolkit of aggregated indicators. Here it is argued that to interpret correctly each aggregated metric value, policy makers also require a hierarchy of disaggregated component indicator values, each explained fully. Possible implications for urban planning are briefly reviewed

Handbook of sustainable engineering

CERN Document Server

Lee, Kun-Mo

2013-01-01

"The efficient utilization of energy, sustainable use of natural resources, and large-scale adoption of sustainable technologies is the key to a sustainable future. The Handbook of Sustainable Engineering provides tools that will help us achieve these goals". Nobel Prize Winner Dr. R.K. Pauchauri, Chairman, UN Intergovernmental Panel on Climate Change As global society confronts the challenges of diminishing resources, ecological degradation, and climate change, engineers play a crucial role designing and building technologies and products that fulfil our needs for utility and sustainability. The Handbook of Sustainable Engineering equips readers with the context and the best practices derived from both academic research and practical examples of successful implementations of sustainable technical solutions. The handbook’s content revolves around the two themes, new ways of thinking and new business models, including sustainable production, products, service systems and consumption while addressing key asse...

Transition to Sustainability: Science Support Through Characterizing and Quantifying Sustainability

Science.gov (United States)

Plag, Hans-Peter; Jules-Plag, Shelley

2013-04-01

Humanity's sustainability crisis caused by a growing, resource-demanding population on a finite, rapidly changing planet challenges us with large uncertainties. While some see the planet on the edge, it is more likely that humanity as a global species is on the edge. However, science, Earth observations, and socio-economic data do not provide clear indications of where this edge is, and how close we are to this edge. The instruments in the cockpit of a modern airplane provide more relevant and actionable information to the pilots than the "cockpit" of planet Earth provides to those involved in the governance of our planet. There is no manual for those responsible to keep us on a track within the "safe operational space" of humanity. What science and research is needed to make progress towards a future, where knowledge of sustainability and resilience allows for an evidence-based, adaptive policy and decision-making? Paradoxically, innovation over the recent decades have worsened the sustainablity crisis, but more innovation is imperative to bring us out of it. The comprehensive, conceptual framework for sustainability research that would provide an umbrella identifying the key challenges and a basis for this innovation seems to be missing. Defining sustainability as a characteristic of a process that can be maintained at a certain level indefinitely, we need to agree in a societal deliberation on a few aspects, including what processes we want to consider (the anthroposphere as embedded in the Earth system?), what time frames we want to aim at (not infinity, but very long time frames, e.g., 10,000 years?), and what spatial scales we need to look at (from local to global?). Most importantly, we need to acknowledge that humanity's sustainability is the result of intertwined social, economic, and environmental (s2e) processes that can not be separate. The research then has to clarify in the s2e context what are the attributes of sustainability, the relevant processes

Simulations of CYP51A from Aspergillus fumigatus in a model bilayer provide insights into triazole drug resistance.

Science.gov (United States)

Nash, Anthony; Rhodes, Johanna

2018-04-01

Azole antifungal drugs target CYP51A in Aspergillus fumigatus by binding with the active site of the protein, blocking ergosterol biosynthesis. Resistance to azole antifungal drugs is now common, with a leucine to histidine amino acid substitution at position 98 the most frequent, predominantly conferring resistance to itraconazole, although cross-resistance has been reported in conjunction with other mutations. In this study, we create a homology model of CYP51A using a recently published crystal structure of the paralog protein CYP51B. The derived structures, wild type, and L98H mutant are positioned within a lipid membrane bilayer and subjected to molecular dynamics simulations in order improve the accuracy of both models. The structural analysis from our simulations suggests a decrease in active site surface from the formation of hydrogen bonds between the histidine substitution and neighboring polar side chains, potentially preventing the binding of azole drugs. This study yields a biologically relevant structure and set of dynamics of the A. fumigatus Lanosterol 14 alpha-demethylase enzyme and provides further insight into azole antifungal drug resistance.

Drug abuse: newly-emerging drugs and trends.

Science.gov (United States)

Davis, Gregory G

2012-09-01

Drug abusers have access to new, more potent compounds that evade existing laws by virtue of their novel chemical structures. These drugs are available for purchase at stores and over the internet. The drugs are not illegal because they are so new that laws have not yet been passed to ban them. These drugs are leading to emergency department visits for cardiovascular, neurologic, and psychiatric complications. Standard drug screens are not designed to detect these new substances. The internet provides access to drugs for substance abusers but also provides physicians speed of access to the habits of substance abusers.

Campus Sustainability Governance in Canada: A Content Analysis of Post-Secondary Institutions' Sustainability Policies

Science.gov (United States)

Vaughter, Philip; McKenzie, Marcia; Lidstone, Lauri; Wright, Tarah

2016-01-01

Purpose: This paper aims to provide an overview of a content analysis of sustainability policies from Canadian post-secondary education institutions. The paper reports findings on the orientations to sustainability evident in the policies; references to other policies within the documents; and other key themes on how sustainability is engaged in…

Knowledge engineering for adverse drug event prevention: on the design and development of a uniform, contextualized and sustainable knowledge-based framework.

Science.gov (United States)

Koutkias, Vassilis; Kilintzis, Vassilis; Stalidis, George; Lazou, Katerina; Niès, Julie; Durand-Texte, Ludovic; McNair, Peter; Beuscart, Régis; Maglaveras, Nicos

2012-06-01

The primary aim of this work was the development of a uniform, contextualized and sustainable knowledge-based framework to support adverse drug event (ADE) prevention via Clinical Decision Support Systems (CDSSs). In this regard, the employed methodology involved first the systematic analysis and formalization of the knowledge sources elaborated in the scope of this work, through which an application-specific knowledge model has been defined. The entire framework architecture has been then specified and implemented by adopting Computer Interpretable Guidelines (CIGs) as the knowledge engineering formalism for its construction. The framework integrates diverse and dynamic knowledge sources in the form of rule-based ADE signals, all under a uniform Knowledge Base (KB) structure, according to the defined knowledge model. Equally important, it employs the means to contextualize the encapsulated knowledge, in order to provide appropriate support considering the specific local environment (hospital, medical department, language, etc.), as well as the mechanisms for knowledge querying, inference, sharing, and management. In this paper, we present thoroughly the establishment of the proposed knowledge framework by presenting the employed methodology and the results obtained as regards implementation, performance and validation aspects that highlight its applicability and virtue in medication safety. Copyright © 2012 Elsevier Inc. All rights reserved.

Prescription painkillers and controlled substances: an appraisal of drug information provided by six US pharmacies

Directory of Open Access Journals (Sweden)

Gill PS

2013-02-01

Full Text Available Preetinder S GillCollege of Technology, Eastern Michigan University, Ypsilanti, MI, USABackground: Health literacy impacts health outcomes. Health literacy is a measure of a person's competence to find, access, contextualize, and understand the information needed to make health decisions. Low levels of health literacy have been associated with poor health status. Health literacy can be enhanced by improving the readability of health literature. Misuse and abuse of prescription medicines and controlled substances is rising. It could be argued that improving the readability of the drug-information documents associated with these medicines could serve to alleviate this situation in a small, albeit incremental, manner. This paper provides a readability assessment of 71 such documents.Methods: The readability of drug-information documents associated with 12 commonly misused and abused painkiller medicines and controlled substances published by the top six US pharmacies was assessed. The Flesch-Kincaid Grade Level, Flesch Reading Ease, and Simple Measure of Gobbledygook (SMOG indices were used to assess the readability of these drug-information documents. One-way analysis of variance (ANOVA was used to compare the readability of the documents.Results: The average Flesch-Kincaid Grade Level index score was found to be 11.16. The average Flesch Reading Ease index score was found to be 45.94. The average SMOG index score was found to be 13.60. Pharmacies C and E had the best average readability scores, whereas pharmacies A and B had the worst average readability scores.Conclusion: Access, contents, and formatting of the documents were qualitatively analyzed to make recommendations to improve readability. Pharmacies C and E were used as benchmarks to identify the seven best practices. Good drug-information documents should have: (1 clear purpose, (2 limited scope, (3 summary/brief review, (4 well-placed graphics, (5 informative illustrations, (6 clean

New regulatory pathways and incentives for sustainable antibiotics: Recent European & US Initiatives

DEFF Research Database (Denmark)

Minssen, Timo

2014-01-01

) and the COMBACTE and TRANSLOCATION projects under NewDrugs4BadBugs program, involving the EU Commission and the pharma industry. But also national initiatives, such as the successful Danish ban and regulations on antibiotic use in animal production, as well as educational efforts (the European Antibiotic Awareness......New regulatory pathways and incentives for sustainable antibiotics: Recent European & US Initiatives Posted on March 19, 2014 by Timo Minssen Please find attached a ppt presentation on “New regulatory pathways and incentives for sustainable antibiotics: Recent European & US Initiatives” given...... on March 7, 2014 at the Broad Institute of MIT and Harvard. The presentation was followed by a discussion moderated by US patent attorney Melissa Hunter-Ensor, Partner at Saul Ewing, Boston I started out by emphasizing increasing problems of antimicrobial resistance (AMR) on a global level, providing new...

WHAT DOES PROVIDE A CLINICAL EFFICACY OF METOPROLOL?

Directory of Open Access Journals (Sweden)

E. V. Kuleshova

2010-01-01

Full Text Available Relationship of metoprolol clinical efficacy with its different salts (tartrate, succinate, fumarate as well as its presentations (tablets with immediate, controlled or sustained release is analyzed. It is highlighted that pharmacodynamic properties depend on metoprolol molecule only. These properties do not change after modification of drug presentation or metoprolol plasma concentration which depends on velocity of drug release from the tablet. Data of randomized clinical trials are discussed in regard to development of evidence base for use of different metoprolol presentations in treatment of patients with arterial hypertension, unstable angina, myocardial infarction, heart failure. Indications for tartrate and succinate salts of metoprolol are presented. Results of clinical studies on efficacy of metoprolol tartrate in long-acting drug presentations are analyzed.

Naltrexone sustained-release/bupropion sustained-release for the management of obesity: review of the data to date

Directory of Open Access Journals (Sweden)

Caixàs A

2014-09-01

Full Text Available Assumpta Caixàs, Lara Albert, Ismael Capel, Mercedes Rigla Endocrinology and Nutrition Department, Parc Tauli Sabadell University Hospital, Autonomous University of Barcelona, Barcelona, Spain Abstract: Obesity is an emerging disease worldwide. Changes in living habits, especially with increased consumption of high-calorie foods and decreased levels of physical activity, lead to an energy imbalance that brings weight gain. Overweight and obesity are major risk factors for several chronic diseases (including cardiovascular diseases, diabetes, and cancer, reduce quality of life, and are associated with higher mortality. For all these reasons, it is of the utmost importance that the trend be reversed and obese people enabled to lose weight. It is known that eating a healthy diet and exercising regularly can help prevent obesity, but data show that in many cases these steps are not enough. This is the reason why, over the last few decades, several antiobesity drugs have been developed. However, the disappointing results demonstrated for the vast majority of them have not discouraged the pharmaceutical industry from continuing to look for an effective drug or combination of drugs. The systematic review presented here focuses on naltrexone sustained-release/bupropion sustained-release combination (Contrave®. We conclude from the current published reports that its effectiveness in the treatment of obesity can be estimated as a placebo-subtracted weight loss of around 4.5%. This weight reduction is moderate but similar to other antiobesity drugs. The safety profile of this combination is acceptable, despite additional data regarding cardiovascular disease being needed. Keywords: Contrave, weight loss, overweight, cardiovascular disease, diabetes, cancer

Conceptualising sustainability assessment

International Nuclear Information System (INIS)

Pope, Jenny; Annandale, David; Morrison-Saunders, Angus

2004-01-01

Sustainability assessment is being increasingly viewed as an important tool to aid in the shift towards sustainability. However, this is a new and evolving concept and there remain very few examples of effective sustainability assessment processes implemented anywhere in the world. Sustainability assessment is often described as a process by which the implications of an initiative on sustainability are evaluated, where the initiative can be a proposed or existing policy, plan, programme, project, piece of legislation, or a current practice or activity. However, this generic definition covers a broad range of different processes, many of which have been described in the literature as 'sustainability assessment'. This article seeks to provide some clarification by reflecting on the different approaches described in the literature as being forms of sustainability assessment, and evaluating them in terms of their potential contributions to sustainability. Many of these are actually examples of 'integrated assessment', derived from environmental impact assessment (EIA) and strategic environmental assessment (SEA), but which have been extended to incorporate social and economic considerations as well as environmental ones, reflecting a 'triple bottom line' (TBL) approach to sustainability. These integrated assessment processes typically either seek to minimise 'unsustainability', or to achieve TBL objectives. Both aims may, or may not, result in sustainable practice. We present an alternative conception of sustainability assessment, with the more ambitious aim of seeking to determine whether or not an initiative is actually sustainable. We term such processes 'assessment for sustainability'. 'Assessment for sustainability' firstly requires that the concept of sustainability be well-defined. The article compares TBL approaches and principles-based approaches to developing such sustainability criteria, concluding that the latter are more appropriate, since they avoid many

Sustainability protects resources for future generations

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-04-01

This publication by the National Renewable Energy Laboratory addresses the steps necessary to provide livable urban centers for future generations through sustainable development, or sustainability. To illustrate this concept, nonsustainable cities and sustainable cities are compared. Sustainable city projects for several major US cites are reviewed.

The physical and chemical stability of suspensions of sustained-release diclofenac microspheres.

Science.gov (United States)

Lewis, L; Boni, R L; Adeyeye, C M

1998-01-01

The major challenge in liquid sustained-release oral suspensions is to minimize drug diffusion into the suspending medium and to retain the original properties of the microparticles during storage. Diclofenac wax microspheres prepared by the hydrophobic congealable disperse phase method were formulated as a sustained release suspension and stored at three different temperatures (25, 37 and 45 degrees C) for 3 months, to evaluate the physical and chemical stability of the suspended microspheres. Suspensions of microspheres stored at ambient temperatures were both physically and chemically stable, but at higher temperatures, up to 45 degrees C, there was a decrease in drug release due to scaling and melting on the microsphere surface as observed by scanning electron microscopy. However, on prolonged storage, up to 90 days, especially at 45 degrees C, temperature became a dominant factor causing an increase in drug release. The suspension of diclofenac microspheres was chemically stable for 3 months, while the plain drug suspension exhibited slight degradation.

High-amylose sodium carboxymethyl starch matrices: development and characterization of tramadol hydrochloride sustained-release tablets for oral administration.

Science.gov (United States)

Nabais, Teresa; Leclair, Grégoire

2014-01-01

Substituted amylose (SA) polymers were produced from high-amylose corn starch by etherification of its hydroxyl groups with chloroacetate. Amorphous high-amylose sodium carboxymethyl starch (HASCA), the resulting SA polymer, was spray-dried to obtain an excipient (SD HASCA) with optimal binding and sustained-release (SR) properties. Tablets containing different percentages of SD HASCA and tramadol hydrochloride were produced by direct compression and evaluated for dissolution. Once-daily and twice-daily SD HASCA tablets containing two common dosages of tramadol hydrochloride (100 mg and 200 mg), a freely water-soluble drug, were successfully developed. These SR formulations presented high crushing forces, which facilitate further tablet processing and handling. When exposed to both a pH gradient simulating the pH variations through the gastrointestinal tract and a 40% ethanol medium, a very rigid gel formed progressively at the surface of the tablets providing controlled drug-release properties. These properties indicated that SD HASCA was a promising and robust excipient for oral, sustained drug-release, which may possibly minimize the likelihood of dose dumping and consequent adverse effects, even in the case of coadministration with alcohol.

Drugs and Polymers for Delivery Systems in OA Joints: Clinical Needs and Opportunities

Directory of Open Access Journals (Sweden)

Maarten Janssen

2014-03-01

Full Text Available Osteoarthritis (OA is a big burden of disease worldwide and one of the most common causes of disability in the adult population. Currently applied therapies consist of physical therapy, oral medication, intra-articular injections, and surgical interventions, with the main goal being to reduce pain and improve function and quality of life. Intra-articular (IA administration of drugs has potential benefits in OA treatment because it minimizes systemic bioavailability and side effects associated with oral administration of drugs without compromising the therapeutic effect in the joint. However, IA drug residence time is short and there is a clinical need for a vehicle that is able to provide a sustained release long enough for IA therapy to fulfill its promise. This review summarizes the use of different polymeric systems and the incorporated drugs for IA drug delivery in the osteoarthritic joint with a primary focus on clinical needs and opportunities.

Polylysine as a vehicle for extracellular matrix-targeted local drug delivery, providing high accumulation and long-term retention within the vascular wall

NARCIS (Netherlands)

Sakharov, D.V.; Jie, A.F.H.; Bekkers, M.E.A.; Emeis, J.J.; Rijken, D.C.

2001-01-01

We present the first steps in the elaboration of an approach of extracellular matrix-targeted local drug delivery (ECM-LDD), designed to provide a high concentration, ubiquitous distribution, and long-term retention of a drug within the vessel wall after local intravascular delivery. The approach is

Direct-to-consumer promotion of prescription drugs. Economic implications for patients, payers and providers.

Science.gov (United States)

Findlay, S D

2001-01-01

Spending on outpatient prescription drugs in the US is accelerating rapidly. Although numerous factors are driving this trend, attention has recently focused on the role played by the marketing, promotion and advertising of pharmaceuticals, in particular direct-to-consumer (DTC) advertising. In 1997, the US Food and Drug Administration (FDA) issued a 'guidance' on such mass media promotion. The guidance altered existing FDA rules and effectively permitted pharmaceutical companies to promote prescription drugs on television and radio without giving detailed or even summary information on indications, efficacy or potential adverse effects. Since then, television commercials, in particular, and print advertisements in consumer magazines and newspapers have proliferated rapidly. Pharmaceutical companies spent $US1.8 billion on DTC advertising in 1999, a 40% increase over 1998. This spending in 1999 was heavily concentrated on about 50 drugs. Evidence is growing that DTC promotion of prescription drugs is: (i) alerting consumers to the existence of new drugs and the conditions they treat; (ii) increasing consumer demand for many drugs; (iii) contributing increasingly to the recent sharp increase in the number of prescriptions being dispensed; (iv) raising sales revenues; and, thus, (v) contributing to the higher pharmaceutical costs of health insurers, government and consumers. The public policy issues surrounding DTC advertisements centre on the following questions: (i) are the advertisements leading to the inappropriate clinical use of some drugs? (ii) are the advertisements inducing both consumers and physicians to choose more costly new brand-name drugs over less expensive, but equally effective, older brand or generic drugs? (iii) do television advertisements for prescription drugs contain a balanced amount of information on benefits versus potential adverse effects? and (iv) will the revenue benefits generated by DTC advertising cause pharmaceutical companies to

Preparation and characterization of β-cyclodextrin grafted N-maleoyl chitosan nanoparticles for drug delivery

Directory of Open Access Journals (Sweden)

Xinyu Hou

2017-11-01

Full Text Available β-cyclodextrin (CD grafted N-maleoyl chitosan (CD-g-NMCS with two different degrees of substitution (DS of N-maleoyl (DS = 21.2% and 30.5% were synthesized from maleic anhydride and chitosan bearing pendant cyclodextrin (CD-g-CS. CD-g-NMCS based nanoparticles were prepared via an ionic gelation method together with chitosan and CD-g-CS nanoparticles. The size and zeta potential of prepared CD-g-NMCS nanoparticles were 179.2~274.0 nm and 36.2~42.4 mV, respectively. In vitro stability test indicated that CD-g-NMCS nanoparticles were more stable in phosphate-buffered saline compared with chitosan nanoparticles. Moreover, a poorly water-soluble drug, ketoprofen (KTP, was selected as a model drug to study the obtained nanoparticle's potentials as drug delivery carriers. The drug loading efficiency of CD-g-NMCS20 nanoparticles were 14.8% for KTP. MTT assay showed that KTP loaded CD-g-NMCS nanoparticles were safe drug carriers. Notably, in vitro drug release studies showed that KTP was released in a sustained-release manner for the nanoparticles. The pharmacokinetic of drug loaded CD-g-NMCS20 nanoparticles were evaluated in rats after intravenous administration. The results of studies revealed that, compared with free KTP, KTP loaded CD-g-NMCS20 nanoparticles exhibited a significant increase in AUC0→24h and mean residence time by 6.6-fold and 2.9-fold, respectively. Therefore, CD-g-NMCS nanoparticles could be used as a novel promising nanoparticle-based drug delivery system for sustained release of poorly water-soluble drugs. The carboxylic acid groups of the CD-g-NMCS molecule provide convenient sites for further structural modifications including introduction of tissue- or disease- specific targeting groups.

Hydroxyapatite hierarchically nanostructured porous hollow microspheres: rapid, sustainable microwave-hydrothermal synthesis by using creatine phosphate as an organic phosphorus source and application in drug delivery and protein adsorption.

Science.gov (United States)

Qi, Chao; Zhu, Ying-Jie; Lu, Bing-Qiang; Zhao, Xin-Yu; Zhao, Jing; Chen, Feng; Wu, Jin

2013-04-22

Hierarchically nanostructured porous hollow microspheres of hydroxyapatite (HAP) are a promising biomaterial, owing to their excellent biocompatibility and porous hollow structure. Traditionally, synthetic hydroxyapatite is prepared by using an inorganic phosphorus source. Herein, we report a new strategy for the rapid, sustainable synthesis of HAP hierarchically nanostructured porous hollow microspheres by using creatine phosphate disodium salt as an organic phosphorus source in aqueous solution through a microwave-assisted hydrothermal method. The as-obtained products are characterized by powder X-ray diffraction (XRD), Fourier-transform IR (FTIR) spectroscopy, SEM, TEM, Brunauer-Emmett-Teller (BET) nitrogen sorptometry, dynamic light scattering (DLS), and thermogravimetric analysis (TGA). SEM and TEM micrographs show that HAP hierarchically nanostructured porous hollow microspheres consist of HAP nanosheets or nanorods as the building blocks and DLS measurements show that the diameters of HAP hollow microspheres are within the range 0.8-1.5 μm. The specific surface area and average pore size of the HAP porous hollow microspheres are 87.3 m(2) g(-1) and 20.6 nm, respectively. The important role of creatine phosphate disodium salt and the influence of the experimental conditions on the products were systematically investigated. This method is facile, rapid, surfactant-free and environmentally friendly. The as-prepared HAP porous hollow microspheres show a relatively high drug-loading capacity and protein-adsorption ability, as well as sustained drug and protein release, by using ibuprofen as a model drug and hemoglobin (Hb) as a model protein, respectively. These experiments indicate that the as-prepared HAP porous hollow microspheres are promising for applications in biomedical fields, such as drug delivery and protein adsorption. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Educating Professionals for Sustainable Futures

Directory of Open Access Journals (Sweden)

Hille Janhonen-Abruquah

2018-02-01

Full Text Available The recent discourse on sustainability science calls for interdisciplinary research. The home economics science approach ranges from individual actions to the involvement of communities and societies at large, and thus it can provide important perspectives on cultural sustainability. The aim of the research is to study the linkage between cultural sustainability and service sector education to support the creation of sustainable professions. In the present small-scale empirical study, the food service degree curriculum of a Finnish vocational college and teachers’ group interview data were analyzed to find how cultural sustainability is presented in the curriculum and how it is understood by teachers and integrated into teaching practices. Previous cultural sustainability research identifies four perspectives of cultural sustainability: (1 vitality of cultural traditions; (2 economic starting point; (3 diversity together with maintenance of local culture; and (4 possible influence on the balance between human actions and environment. Findings indicate that sustainability, including cultural sustainability, is integrated in the curriculum and considered important by teachers. Translating these into practice remains a challenge. The balance between human and nature was mostly understood as recycling, use of public transport, sustainable consumption, and taking trips to the nature nearby. Cultural sustainability as a concept is not well known, although themes such as multicultural issues, equality, charity, and environmental responsibility were included in teachers’ practical lessons daily. Feasts and celebrations in learning were opportunities to view cultural sustainability widely. This paper provides a way forward for the teachers to develop further their pedagogical practices.

Use of collateral sensitivity networks to design drug cycling protocols that avoid resistance development

DEFF Research Database (Denmark)

Imamovic, Lejla; Sommer, Morten

2013-01-01

collateral sensitivity and resistance profiles, revealing a complex collateral sensitivity network. On the basis of these data, we propose a new treatment framework-collateral sensitivity cycling-in which drugs with compatible collateral sensitivity profiles are used sequentially to treat infection...... pathogens. These results provide proof of principle for collateral sensitivity cycling as a sustainable treatment paradigm that may be generally applicable to infectious diseases and cancer....

A novel nanoparticulate system for sustained delivery of acid-labile lansoprazole.

Science.gov (United States)

Alai, Milind Sadashiv; Lin, Wen Jen

2013-11-01

In the present study, an effort was made to develop the Eudragit RS100 based nanoparticulate system for sustained delivery of an acid-labile drug, lansoprazole (LPZ). LPZ-loaded Eudragit RS100 nanoparticles (ERSNPs) were prepared by oil-in-water emulsion-solvent evaporation method. The effects of various formulation variables such as polymer concentration, drug amount and solvent composition on physicochemical performance of nanoparticles and in vitro drug release were investigated. All nanoparticles were spherical with particle size 198.9 ± 8.6-376.9 ± 5.6 nm and zeta potential +35.1 ± 1.7 to +40.2 ± 0.8 mV. The yield of nanoparticles was unaffected by change of these three variables. However, the drug loading and encapsulation efficiency were affected by polymer concentration and drug amount. On the other hand, the particle size of nanoparticles was significantly affected by polymer concentration and internal phase composition due to influence of droplet size during emulsification process. All nanoparticles prolonged drug release for 24h which was dominated by a combination of drug diffusion and polymer chain relaxation. The fastest and the slowest release rates were observed in C2-1002-10/0 and C8-4001-10/0, respectively, based on the release rate constant (k). Thus, the developed nanoparticles possessed a potential as a nano-carrier to sustain drug delivery for treatment of acid related disorders. Copyright © 2013 Elsevier B.V. All rights reserved.

Aminoadamantanes versus other antiviral drugs for chronic hepatitis C

DEFF Research Database (Denmark)

Lamers, Mieke H; Broekman, Mark; Drenth, Joost Ph

2014-01-01

months after the end of treatment) in approximately 40% to 80% of treated patients, depending on viral genotype. Recently, a new class of drugs have emerged for hepatitis C infection, the direct acting antivirals, which in combination with standard therapy or alone can lead to sustained virological...... response in 80% or more of treated patients. Aminoadamantanes, mostly amantadine, are antiviral drugs used for the treatment of patients with chronic hepatitis C. We have previously systematically reviewed amantadine versus placebo or no intervention and found no significant effects of the amantadine...... on all-cause mortality or liver-related morbidity and on adverse events in patients with hepatitis C. Overall, we did not observe a significant effect of amantadine on sustained virological response. In this review, we systematically review aminoadamantanes versus other antiviral drugs. OBJECTIVES...

Packaging for Sustainability

CERN Document Server

Lewis, Helen; Fitzpatrick, Leanne

2012-01-01

The packaging industry is under pressure from regulators, customers and other stakeholders to improve packaging’s sustainability by reducing its environmental and societal impacts. This is a considerable challenge because of the complex interactions between products and their packaging, and the many roles that packaging plays in the supply chain. Packaging for Sustainability is a concise and readable handbook for practitioners who are trying to implement sustainability strategies for packaging. Industry case studies are used throughout the book to illustrate possible applications and scenarios. Packaging for Sustainability draws on the expertise of researchers and industry practitioners to provide information on business benefits, environmental issues and priorities, environmental evaluation tools, design for environment, marketing strategies, and challenges for the future.

Effect of micropatterning induced surface hydrophobicity on drug release from electrospun cellulose acetate nanofibers

Science.gov (United States)

Adepu, Shivakalyani; Gaydhane, Mrunalini K.; Kakunuri, Manohar; Sharma, Chandra S.; Khandelwal, Mudrika; Eichhorn, Stephen J.

2017-12-01

Sustained release and prevention of burst release for low half-life drugs like Diclofenac sodium is crucial to prevent drug related toxicity. Electrospun nanofibers have emerged recently as potential carrier materials for controlled and sustained drug release. Here, we present a facile method to prevent burst release by tuning the surface wettability through template assisted micropatterning of drug loaded electrospun cellulose acetate (CA) nanofibers. A known amount of drug (Diclofenac sodium) was first mixed with CA and then electrospun in the form of a nanofabric. This as-spun network was hydrophilic in nature. However, when electrospinning was carried out through non-conducting templates, viz nylon meshes with 50 and 100 μm size openings, two kinds of hydrophobic micro-patterned CA nanofabrics were produced. In vitro transdermal testing of our nanofibrous mats was carried out; these tests were able to show that it would be possible to create a patch for transdermal drug release. Further, our results show that with optimized micro-patterned dimensions, a zero order sustained drug release of up to 12 h may be achieved for the transdermal system when compared to non-patterned samples. This patterning caused a change in the surface wettability, to a hydrophobic surface, resulting in a controlled diffusion of the hydrophilic drug. Patterning assisted in controlling the initial burst release, which is a significant finding especially for low half-life drugs.

Action Research for Sustainability

DEFF Research Database (Denmark)

Egmose, Jonas

by analysing processes of social learning. The book addresses the need to move towards sustainability at societal level as a democratic challenge questioning the way we live on planet earth. By conceptualising sustain-ability as an immanent and emergent ability of ecological and social life, continuously...... to provide local citizens with a greater say in the future of urban sustainability research, this book shows how action research can make important methodological contributions to processes of social learning between citizens and scientists by enabling free spaces in peoples everyday life and within academia...

Fabrication, characterization and evaluation of bacterial cellulose-based capsule shells for oral drug delivery

DEFF Research Database (Denmark)

Ullah, Hanif; Badshah, Munair; Mäkilä, Ermei

2017-01-01

Bacterial cellulose (BC) was investigated for the first time for the preparation of capsule shells for immediate and sustained release of drugs. The prepared capsule shells were characterized using X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectroscopy. The BC...... to gelatin capsules with both immediate and sustained drug release properties depending upon the compositions of the encapsulated materials....

Coaxial Electrospray of Curcumin-Loaded Microparticles for Sustained Drug Release.

Directory of Open Access Journals (Sweden)

Shuai Yuan

Full Text Available Curcumin exhibits superior anti-inflammatory, antiseptic and analgesic activities without significant side effects. However, clinical dissemination of this natural medicine is limited by its low solubility and poor bio-availability. To overcome this limitation, we propose to encapsulate curcumin in poly(lactic-co-glycolic acid (PLGA microparticles (MPs by an improved coaxial electrospray (CES process. This process is able to generate a stable cone-jet mode in a wide range of operation parameters in order to produce curcumin-loaded PLGA MPs with a clear core-shell structure and a designated size of several micrometers. In order to optimize the process outcome, the effects of primary operation parameters such as the applied electric voltages and the liquid flow rates are studied systemically. In vitro drug release experiments are also carried out for the CES-produced MPs in comparison with those by a single axial electrospray process. Our experimental results show that the CES process can be effectively controlled to encapsulate drugs of low aqueous solubility for high encapsulation efficiency and optimal drug release profiles.

Association of Risk Perception and Information Provided on the Labels of Over-the-Counter Drugs: Role of Race, Education, Age and Income

Directory of Open Access Journals (Sweden)

Sunil Mathur

2014-01-01

Full Text Available Background: The use of over-the-counter (OTC drugs has increased tremendously, however, information on risk perception regarding the use of OTC drugs and their potential toxicity is scarce. Hence, the purpose of this study was to investigate the perception of OTC drug safety and efficacy based on reading product packaging and the effect of race, education, age and income. Methods: We used the HINTS 2012 data set with total sample size of 2,554. Results: OTC drug users having some high school education had a lower chance of frequently reading information included in the product labeling with the OTC medication. OTC drug users less than 50 years of age were always likely to read drug information on the OTC drug labeling. Also, Non-Hispanic blacks were more likely to read OTC drug labeling than Non-Hispanic whites.  OTC drug users less than 50 years of age consider OTC drugs safer than prescription drugs.  Conversely, OTC drug users with a high school, some college or bachelor’s degree consider OTC drugs less safe than prescription drugs.  Non-Hispanic blacks, non-Hispanic whites, and subjects of lower income were less likely to consider OTC drugs safer than prescription drugs.  OTC drug users with a high school education and some college perceive OTC drugs to be less effective than prescription drugs.Conclusion: To conclude, age, education, race, and income affect risk perception on OTC drugs.  Consumer information programs need to be designed so that meaningful results can be incorporated into public policy. Providing information on the labeling of OTC drugs and likelihood of patients reading this information require further study.

A New Agenda for Sustainability

DEFF Research Database (Denmark)

Aagaard Nielsen, Kurt

Two decades after the Brundtland Commission's Report "Our Common Future" adopted the concept of 'sustainable development', this book provides a renewal of the concept exploring the potential for new practices and fields for those involved in sustainability activity. The book addresses a number...... on sustainability. The material dealt with in the book offers a wide variety of perspectives on sustainability and reflects the importance of interdisciplinary and transdiciplinary work in the field. Suggesting targets for future analytical and political efforts in achieving global sustainability, this book offers...

Cystic Fibrosis, Cystic Fibrosis Transmembrane Conductance Regulator and Drugs: Insights from Cellular Trafficking.

Science.gov (United States)

Bridges, Robert J; Bradbury, Neil A

2018-01-01

The eukaryotic cell is organized into membrane-delineated compartments that are characterized by specific cadres of proteins sustaining biochemically distinct cellular processes. The appropriate subcellular localization of proteins is key to proper organelle function and provides a physiological context for cellular processes. Disruption of normal trafficking pathways for proteins is seen in several genetic diseases, where a protein's absence for a specific subcellular compartment leads to organelle disruption, and in the context of an individual, a disruption of normal physiology. Importantly, several drug therapies can also alter protein trafficking, causing unwanted side effects. Thus, a deeper understanding of trafficking pathways needs to be appreciated as novel therapeutic modalities are proposed. Despite the promising efficacy of novel therapeutic agents, the intracellular bioavailability of these compounds has proved to be a potential barrier, leading to failures in treatments for various diseases and disorders. While endocytosis of drug moieties provides an efficient means of getting material into cells, the subsequent release and endosomal escape of materials into the cytosol where they need to act has been a barrier. An understanding of cellular protein/lipid trafficking pathways has opened up strategies for increasing drug bioavailability. Approaches to enhance endosomal exit have greatly increased the cytosolic bioavailability of drugs and will provide a means of investigating previous drugs that may have been shelved due to their low cytosolic concentration.

Building a Sustainable Future: A Report on the Environmental Protection Agency's Brownfields Sustainability Pilots

Science.gov (United States)

This report describes each of the Brownfields Sustainability Pilots and provides findings and recommendations for future projects. It is intended for use by people, communities, organizations, and agencies helping make brownfields more sustainable.

Principles of sustainable energy systems

CERN Document Server

Kreith, Frank

2013-01-01

… ""This is an ideal book for seniors and graduate students interested in learning about the sustainable energy field and its penetration. The authors provide very strong discussion on cost-benefit analysis and ROI calculations for various alternate energy systems in current use. This is a descriptive book with detailed case-based analyses of various systems and engineering applications. The text book provides real-world case studies and related problems pertaining to sustainable energy systems.""--Dr. Kuruvilla John, University of North Texas""The new edition of ""Principles of Sustainable En

Swelling, erosion and drug release characteristics of salbutamol sulfate from hydroxypropyl methylcellulose-based matrix tablets.

Science.gov (United States)

Chaibva, Faith A; Khamanga, Sandile M M; Walker, Roderick B

2010-12-01

Hydrophilic matrix formulations are important and simple technologies that are used to manufacture sustained release dosage forms. Hydroxypropyl methylcellulose-based matrix tablets, with and without additives, were manufactured to investigate the rate of hydration, rate of erosion, and rate and mechanism of drug release. Scanning electron microscopy was used to assess changes in the microstructure of the tablets during drug release testing and whether these changes could be related to the rate of drug release from the formulations. The results revealed that the rate of hydration and erosion was dependent on the polymer combination(s) used, which in turn affected the rate and mechanism of drug release from these formulations. It was also apparent that changes in the microstructure of matrix tablets could be related to the different rates of drug release that were observed from the test formulations. The use of scanning electron microscopy provides useful information to further understand drug release mechanisms from matrix tablets.

Sustained release of verapamil hydrochloride from sodium alginate microcapsules.

Science.gov (United States)

Farhana, S Ayesha; Shantakumar, S M; Shyale, Somashekar; Shalam, Md; Narasu, Laxmi

2010-04-01

The objective of the present study was to develop sustained release microcapsules of verapamil hydrochloride (VH) using biodegradable polymers. For this purpose microcapsules embedded verapamil hydrochloride were prepared using sodium alginate alone and also by incorporating some co polymers like methyl cellulose (MC), sodium carboxy methyl cellulose (SCMC) , poly vinyl pyrollidone (PVP) and xanthan gum by employing complex emulsion method of microencapsulation. Microcapsules were prepared in various core: coat ratios to know the effect of polymer and co polymers on drug release. Overall ten formulations were prepared and evaluated for flow behaviour, sieve analysis, drug entrapment efficiency, in vitro dissolution studies, stability studies, including scanning electron microscopy and DSC. The resulting microcapsules were discrete, large, spherical and also free flowing. The drug content in all the batches of microcapsules was found to be uniform. The release was depended on core: coat ratio and nature of the polymers. FTIR analysis revealed chemical integrity between Verapamil hydrochloride (VH), sodium alginate and between the copolymers. Among the four copolymers used methyl cellulose retarded the drug release more than the other three, hence the same formulation was subjected for in vivo studies. The drug release from the microcapsules was found to be following non fickian diffusion. Mechanism of drug release was diffusion controlled first order kinetics. Drug diffusion co efficient and correlation co efficient were also assessed by using various mathematical models. In vivo result analysis of pharmacokinetic parameters revealed that t max of reference and test formulations were almost same. From the study it was concluded that, sustained release Verapamil hydro chloride microcapsules could be achieved with success using sodium alginate alone and also in combination with other biodegradable polymers.

Sustainable Lifestyles. Today's Facts and Tomorrow's Trends. D1.1 Sustainable lifestyles baseline report

International Nuclear Information System (INIS)

Backhaus, J.; Breukers, S.; Paukovic, M.; Mourik, R.; Mont, O.

2012-01-01

This final version of the baseline report provides a synthesis of research, leading policy and practice, and stakeholder views on potential pathways toward sustainable lifestyles. The purpose of this report is to provide the necessary background information to support the SPREAD social platform participants in creating a holistic vision of sustainable lifestyles in 2050 and recommendations for a plan of action.

Towards Sustainable Growth Business Models

Energy Technology Data Exchange (ETDEWEB)

Kamp-Roelands, N.; Balkenende, J.P.; Van Ommen, P.

2012-03-15

The Dutch Sustainable Growth Coalition (DSGC) has the following objectives: The DSGC aims to pro-actively drive sustainable growth business models along three lines: (1) Shape. DSGC member companies aim to connect economic profitability with environmental and social progress on the basis of integrated sustainable growth business models; (2) Share. DSGC member companies aim for joint advocacy of sustainable growth business models both internationally and nationally; and (3) Stimulate. DSGC member companies aim to stimulate and influence the policy debate on enabling sustainable growth - with a view to finding solutions to the environmental and social challenges we are facing. This is their first report. The vision, actions and mission of DSGC are documented in the Manifesto in Chapter 2 of this publication. Chapter 3 contains an overview of key features of an integrated sustainable growth business model and the roadmap towards such a model. In Chapter 4, project examples of DSGC members are presented, providing insight into the hands-on reality of implementing the good practices. Chapter 5 offers an overview of how the Netherlands provides an enabling environment for sustainable growth business models. Chapter 6 offers the key conclusions.

"Academic drug-detailing": from project to practice in a Swedish urban area.

Science.gov (United States)

Lundborg, C S; Hensjö, L O; Gustafsson, L L

1997-01-01

To develop and test the long-term feasibility of an interdisciplinary independent drug information service providing both written and oral drug information to physicians in an urban area of Sweden (> 400,000 inhabitants). A drug information service was developed encouraging a cooperative approach between a department of clinical pharmacology, general practitioners (GPs), pharmacists, and Drug and Therapeutic Committees. Scientifically-based drug information was condensed and interpreted by a team and presented in both written and oral form. In one part of the area, both oral and written information was provided, while in another part of the area, only written information was distributed. Questionnaires and one prescription survey were performed to elucidate the knowledge and attitudes of the GPs regarding drug treatment of one condition (urinary tract infection, UTI, and norfloxacin were used as examples), as well as their opinion of our services. Over a period of 10 years, 75 issues of a drug bulletin (2000 copies) were distributed. Oral producer-independent drug information, provided jointly by a GP and a pharmacist, was given on 16 occasions in each of 30 health centres (150 GPs). Around 80% of the GPs participated in the meetings. Of these GPs, 75% found the service important for their daily work. A majority of the GPs had prescribed the test drug, norfloxacin, not a first-line drug according to local recommendations, 1 year after approval. A significantly lower proportion of prescribers were observed in the area where the GPs had been provided with both written and oral information regarding recommended treatment (including first-line drugs) for uncomplicated cystitis. The approximate cost for this service in 1995 was SEK 0.685 million (USD 0.1 million); the prescribing costs of the 150 GPs were estimated at SEK 255 million per year. This means that the cost of the service per GP is only around 0.3% of normal prescribing costs. Over a period of 10 years the

Sustainable Foods and Medicines Support Vitality, Sex and Longevity for a 100-Year Starship Expedition

Science.gov (United States)

Edwards, M. R.

Extended space flight requires foods and medicines that sustain crew health and vitality. The health and therapeutic needs for the entire crew and their children for a 100-year space flight must be sustainable. The starship cannot depend on resupply or carry a large cargo of pharmaceuticals. Everything in the starship must be completely recyclable and reconstructable, including food, feed, textiles, building materials, pharmaceuticals, vaccines, and medicines. Smart microfarms will produce functional foods with superior nutrition and sensory attributes. These foods provide high-quality protein and nutralence (nutrient density), that avoids obesity, diabetes, and other Western diseases. The combination of functional foods, lifestyle actions, and medicines will support crew immunity, energy, vitality, sustained strong health, and longevity. Smart microfarms enable the production of fresh medicines in hours or days, eliminating the need for a large dispensary, which eliminates concern over drug shelf life. Smart microfarms are adaptable to the extreme growing area, resource, and environmental constraints associated with an extended starship expedition.

Neighborhood Sustainability Assessment: Evaluating Residential Development Sustainability in a Developing Country Context

Directory of Open Access Journals (Sweden)

Tan Yigitcanlar

2015-03-01

Full Text Available Rapid urbanization, improved quality of life, and diversified lifestyle options have collectively led to an escalation in housing demand in our cities, where residential areas, as the largest portion of urban land use type, play a critical role in the formation of sustainable cities. To date there has been limited research to ascertain residential development layouts that provide a more sustainable urban outcome. This paper aims to evaluate and compare sustainability levels of residential types by focusing on their layouts. The paper scrutinizes three different development types in a developing country context—i.e., subdivision, piecemeal, and master-planned developments. This study develops a “Neighborhood Sustainability Assessment” tool and applies it to compare their sustainability levels in Ipoh, Malaysia. The analysis finds that the master-planned development, amongst the investigated case studies, possesses the potential to produce higher levels of sustainability outcomes. The results reveal insights and evidence for policymakers, planners, development agencies and researchers; advocate further studies on neighborhood-level sustainability analysis, and; emphasize the need for collective efforts and an effective process in achieving neighborhood sustainability and sustainable city formation.

Sustainable operations management: A typological approach

Directory of Open Access Journals (Sweden)

Lawrence Michael Corbett

2009-07-01

Full Text Available This paper discusses the nature of sustainability and sustainable development as they relate to operations management. It proposes a typology for sustainable operations management that is based on the life cycle stages of a product and the three dimensions of corporate social responsibility. The aim is to show how this typology development could provide a useful approach to integrating the diverse strands of sustainability in operations, using industrial ecology and carbon neutrality as examples. It does this by providing a focused subset of environmental concerns for an industrial ecology approach, and some research propositions for the issue of carbon neutrality.

Poly(lactide-co-glycolide) encapsulated hydroxyapatite microspheres for sustained release of doxycycline

International Nuclear Information System (INIS)

Wang Xiaoyun; Xu Hui; Zhao Yanqiu; Wang Shaoning; Abe, Hiroya; Naito, Makio; Liu Yanli; Wang Guoqing

2012-01-01

Highlights: ► PLGA encapsulated HAP-MSs were used for the sustained delivery of Doxycycline (Doxy, a broad spectrum tetracycline antibiotic). ► Sustained Doxy release without obvious burst was observed. ► Mechanism of the sustained Doxy release was illustrated. ► Sustained Doxy release character in vivo was also obtained, the plasma Doxy levels were relatively lower and steady compared to that of the un-encapsulated HAP-MSs. - Abstract: The purpose of this study was to prepare a poly(lactide-co-glycolide) (PLGA) encapsulated hydroxyapatite microspheres (HAP-MSs) as injectable depot for sustained delivery of Doxycycline (Doxy). Doxy loaded HAP-MSs (Doxy-HAP-MSs) were encapsulated with PLGA by solid-in-oil-in-water (S/O/W) emulsion-solvent evaporation technique, the effects of the PLGA used (various intrinsic viscosity and LA/GA ratio) and ratio of PLGA/HAP-MSs on the formation of Doxy-HAP-MSs and in vitro release of Doxy were studied. The results showed that sustained drug release without obvious burst was obtained by using PLGA encapsulated HAP-MSs as the carrier, also the drug release rate could be tailored by changing the ratio of PLGA/HAP-MSs, or PLGA of various intrinsic viscosities or LA/GA ratio. Lower ratio of PLGA/HAP-MSs corresponded faster Doxy release, e.g. for the microspheres of PLGA/HAP-MSs ratio of 8 and 0.25, the in vitro Doxy release percents at the end of 7days were about 23% and 76%, respectively. Higher hydrophilicity (higher ratio of GA to LA) and lower molecular weight of PLGA corresponded to higher Doxy release rates. For in vivo release study, PLGA encapsulated HAP-MSs were subcutaneously injected to the back of mice, and the results showed good correlation between the in vivo and in vitro drug release. Meanwhile, the plasma Doxy levels after subcutaneous administration of PLGA encapsulated Doxy-HAP-MSs were relatively lower and steady compared to that of the un-encapsulated microspheres. In conclusion, PLGA encapsulated HAP-MSs may

Research and development portfolio of the sustainability science team national sustainable operations USDA Forest Service

Science.gov (United States)

Trista Patterson; David Nicholls; Jonathan Long

2015-01-01

The Sustainability Science Team (SST) of the U.S. Department of Agriculture (USDA) Forest Service Sustainable Operations Initiative is a 18-member virtual research and development team, located across five regions and four research stations of the USDA Forest Service. The team provides research, publication, systems analysis, and decision support to the Sustainable...

Sustainable NREL: From Integration to Innovation

Energy Technology Data Exchange (ETDEWEB)

2015-09-01

NREL's sustainability practices are integrated throughout the laboratory and are essential to our mission to develop clean energy and energy efficiency technologies and practices, advance related science and engineering, and provide knowledge and innovations to integrate energy systems at all scales. Sustainability initiatives are integrated through our campus, our staff, and our environment allowing NREL to provide leadership in modeling a sustainability energy future for companies, organizations, governments, and communities.

Factors Influencing Museum Sustainability and Indicators for Museum Sustainability Measurement

Directory of Open Access Journals (Sweden)

Izabela Luiza Pop

2016-01-01

Full Text Available The purpose of this research was to identify the factors upon which museum sustainability depends and the way in which this can be measured. Methodologically, we applied a qualitative research approach, using semi-structured interviews with experts from the Romanian museum sector, complemented by an in-depth study of the literature in this field. Results indicated that any objective measuring of sustainability must take into account the size of a museum’s collections and its organizational structure. It was also found that museum type can affect sustainability via its competitive advantage. However, the sustainability of a museum is not strictly determined by these factors, but also by the management and marketing strategies applied. Based on analysis of literature- and respondent-based factors influencing sustainability, this article proposes a set of 33 indicators that can be used by museums to measure their sustainability, as well as a model that enables evaluation of the sustainability levels of various museums comparatively, regardless of their type, size or importance (e.g., national, regional and local. The results obtained are useful both from a theoretical point of view, given that there are few writings on this topic, and from a practical point of view, as they provide a basis for a clear, objective model of museum sustainability measurement.

Sustained-Paced Finger Tapping: A Novel Approach to Measure Internal Sustained Attention

Directory of Open Access Journals (Sweden)

Marco A. Petilli

2018-05-01

Full Text Available Sustained attention is a fundamental prerequisite for all cognitive functions and its impairment is a common aftermath of both developmental and acquired neurological disorders. To date, all the sustained attention tasks rely heavily on selective attention to external stimuli. The interaction between selective and sustained attention represents a limit in the field of assessment and may mislead researchers or distort conclusions. The aim of the present perspective study was to propose a sustained version of the Paced Finger Tapping (S-PFT test as a novel approach to measure sustained attention that does not leverage external stimuli. Here, we administered S-PFT and other attentional tasks (visual sustained attention, visuospatial attention capacity, selective attention, and divided attention tasks to 85 adolescents. Thus, we provide evidence suggesting that S-PFT is effective in causing performance decrement over time, an important trademark of sustained attention tasks. We also present descriptive statistics showing the relationship between S-PFT and the other attentional tasks. These analyses show that, unlike visual sustained attention tests, performances to our task of internal sustained attention were not correlated to measures of selective attention and visuospatial attention capacity. Our results suggest that S-PFT could represent a promising and alternative tool both for empirical research and clinical assessment of sustained attention.

Sustained release vancomycin-coated titanium alloy using a novel electrostatic dry powder coating technique may be a potential strategy to reduce implant-related infection.

Science.gov (United States)

Han, Jing; Yang, Yi; Lu, Junren; Wang, Chenzhong; Xie, Youtao; Zheng, Xuebin; Yao, Zhenjun; Zhang, Chi

2017-07-24

In order to tackle the implant-related infection, a novel way was developed in this study to coat vancomycin particles mixed with controlled release coating materials onto the surface of titanium alloy by using an electrostatic dry powder coating technique. To characterize this sustained release antibacterial coating, surface morphology, in vitro and in vivo drug release were sequentially evaluated. In vitro cytotoxicity was tested by Cell Counting Kit-8 (CCK-8) assay and cytological changes were observed by inverted microscope. The antibacterial properties against MRSA, including a bacterial growth inhibition assay and a colony-counting test by spread plate method were performed. Results indicated that the vancomycin-coated sample was biocompatible for Human osteoblast cell line MG-63 and displayed effective antibacterial ability against MRSA. The coating film was revealed uniform by scanning electron microscopy. Both the in vitro and in vivo drug release kinetics showed an initially high release rate, followed by an extended period of sustained drug release over 7 days. These results suggest that with good biocompatibility and antibacterial ability, the sustained release antibacterial coating of titanium alloy using our novel electrostatic dry powder coating process may provide a promising candidate for the treatment of orthopedic implant-related infection.

Navigating the sustainability landscape: a systematic review of sustainability approaches in healthcare.

Science.gov (United States)

Lennox, L; Maher, L; Reed, J

2018-02-09

framework for sustainability constructs in healthcare was developed. Choosing a sustainability method can pose a challenge because of the diverse approaches reported in the literature. This review provides a valuable resource to researchers, healthcare professionals and improvement practitioners by providing a summary of available sustainability approaches and their characteristics. This review was registered on the PROSPERO database: CRD42016040081 in June 2016.

Biomimetics in drug delivery systems: A critical review.

Science.gov (United States)

Sheikhpour, Mojgan; Barani, Leila; Kasaeian, Alibakhsh

2017-05-10

Today, the advanced drug delivery systems have been focused on targeted drug delivery fields. The novel drug delivery is involved with the improvement of the capacity of drug loading in drug carriers, cellular uptake of drug carriers, and the sustained release of drugs within target cells. In this review, six groups of therapeutic drug carriers including biomimetic hydrogels, biomimetic micelles, biomimetic liposomes, biomimetic dendrimers, biomimetic polymeric carriers and biomimetic nanostructures, are studied. The subject takes advantage of the biomimetic methods of productions or the biomimetic techniques for the surface modifications, similar to what accrues in natural cells. Moreover, the effects of these biomimetic approaches for promoting the drug efficiency in targeted drug delivery are visible. The study demonstrates that the fabrication of biomimetic nanocomposite drug carriers could noticeably promote the efficiency of drugs in targeted drug delivery systems. Copyright © 2017 Elsevier B.V. All rights reserved.

Sustainability in nursing: a concept analysis

Science.gov (United States)

Anåker, Anna; Elf, Marie

2014-01-01

Aim The aim of this study was to describe, explore and explain the concept of sustainability in nursing. Background Although researchers in nursing and medicine have emphasised the issue of sustainability and health, the concept of sustainability in nursing is undefined and poorly researched. A need exists for theoretical and empirical studies of sustainability in nursing. Design Concept analysis as developed by Walker and Avant. Method Data were derived from dictionaries, international healthcare organisations and literature searches in the CINAHL and MEDLINE databases. Inclusive years for the search ranged from 1990 to 2012. A total of fourteen articles were found that referred to sustainability in nursing. Results Sustainability in nursing involves six defining attributes: ecology, environment, future, globalism, holism and maintenance. Antecedents of sustainability require climate change, environmental impact and awareness, confidence in the future, responsibility and a willingness to change. Consequences of sustainability in nursing include education in the areas of ecology, environment and sustainable development as well as sustainability as a part of nursing academic programs and in the description of the academic subject of nursing. Sustainability should also be part of national and international healthcare organisations. The concept was clarified herein by giving it a definition. Conclusion Sustainability in nursing was explored and found to contribute to sustainable development, with the ultimate goal of maintaining an environment that does not harm current and future generations′ opportunities for good health. This concept analysis provides recommendations for the healthcare sector to incorporate sustainability and provides recommendations for future research. PMID:24602178

Improvement of beef cattle genetics provided increasing sustainability of beef cattle production and protein consumption in Thailand

Energy Technology Data Exchange (ETDEWEB)

Boonyanuwat, K. [Beef Cattle Research and Development Group, Division of Animal Husbandry, Department of Livestock Development, Bangkok (Thailand)], E-mail: kalayabo@yahoo.com; Sirisom, P [Tak Livestock Breeding and Research Center, Meung (Thailand); Putharatanung, A [Nongkwang Livestock Research and Breeding Center, Photharam (Thailand)

2009-07-01

.00%. They were the smallest size. Farmers raised them by main of grass-fed and some added with concentrate. Meat quality from this group was the lowest. The meat texture of this group is the most firm. It was suitable for Thai food cooking. Meat from this group was used to make meatball and Thai food. The second group was around 38.50%. They were fattening 3-6 month. Meat from this group was medium quality. Farmers fed them with grass, agricultural by product, and concentrate. Meat from this group was used for general Thai food and steak cooking. The third and forth group were around 20.00%. In this group, it was added with other beef cattle: Kampangsaen and Ponyangkhum beef cattle. They were fed higher concentrate, up to 90% of concentrate in the last month of fattening. They were fattening 6-12 month. Farmers fed them following feeding plan of cooperative, so they had the greatest ADG and % carcass. Quality of meat from this group was the best, most tender. Meat from this group was used for steak and shabushabu. Meat from this group had quality the same as import meat. Some of them were better than import meat. It was tenderer. The fifth group was less than 0.5%. They were on experiment to establish new breed by DLD. This group was optimized for Thai farmers, small size and low mature age. Meat from this group had the most tenderness and marbling. Meat from this group had more quality than import meat. It was used for steak and shabushabu. Farmers could earn money from beef cattle raising occupation. Beef cattle genetic improvement provided sustainable productivity, profitability, quality of products, and sustained economic growth in rural Thailand. Beef meat production would be the mainly red meat production and provided protein sources for consumer in Thailand. (author)

The Role of Financial Sector in Providing Sustainable Development Goals

Science.gov (United States)

Tokareva, G. F.; Shalina, O. I.; Barkova, E. E.

2018-01-01

The article contains the analysis of the current ecological situation in the Republic of Bashkortostan as an oil production region of Russia. It was emerged that the decrease in emissions from means of transport caused by change in the calculation methodology. The statistical data on environmental control costs and payments for the use of natural resources in the Russian Federation for the period from 2008 to 2016 years have been analyzed. The measures aimed to create favorable conditions for the sustainable social and economic development of the region have been determined. The authors proposed alternative sources of financing the environmental protection: the issuance of ecological («green») bonds and the attraction of ecological deposits to finance environment-oriented investment projects. The main significant investment directions of the funds, obtained due to the emission of domestic ecological loan bonds, corporate ecological bonds and concessional environment-oriented bonds have been identified.

Plant protein-based hydrophobic fine and ultrafine carrier particles in drug delivery systems.

Science.gov (United States)

Malekzad, Hedieh; Mirshekari, Hamed; Sahandi Zangabad, Parham; Moosavi Basri, S M; Baniasadi, Fazel; Sharifi Aghdam, Maryam; Karimi, Mahdi; Hamblin, Michael R

2018-02-01

For thousands of years, plants and their products have been used as the mainstay of medicinal therapy. In recent years, besides attempts to isolate the active ingredients of medicinal plants, other new applications of plant products, such as their use to prepare drug delivery vehicles, have been discovered. Nanobiotechnology is a branch of pharmacology that can provide new approaches for drug delivery by the preparation of biocompatible carrier nanoparticles (NPs). In this article, we review recent studies with four important plant proteins that have been used as carriers for targeted delivery of drugs and genes. Zein is a water-insoluble protein from maize; Gliadin is a 70% alcohol-soluble protein from wheat and corn; legumin is a casein-like protein from leguminous seeds such as peas; lectins are glycoproteins naturally occurring in many plants that recognize specific carbohydrate residues. NPs formed from these proteins show good biocompatibility, possess the ability to enhance solubility, and provide sustained release of drugs and reduce their toxicity and side effects. The effects of preparation methods on the size and loading capacity of these NPs are also described in this review.

Optimization of sustained release aceclofenac microspheres using response surface methodology

Energy Technology Data Exchange (ETDEWEB)

Deshmukh, Rameshwar K.; Naik, Jitendra B., E-mail: jitunaik@gmail.com

2015-03-01

Polymeric microspheres containing aceclofenac were prepared by single emulsion (oil-in-water) solvent evaporation method using response surface methodology (RSM). Microspheres were prepared by changing formulation variables such as the amount of Eudragit® RS100 and the amount of polyvinyl alcohol (PVA) by statistical experimental design in order to enhance the encapsulation efficiency (E.E.) of the microspheres. The resultant microspheres were evaluated for their size, morphology, E.E., and in vitro drug release. The amount of Eudragit® RS100 and the amount of PVA were found to be significant factors respectively for determining the E.E. of the microspheres. A linear mathematical model equation fitted to the data was used to predict the E.E. in the optimal region. Optimized formulation of microspheres was prepared using optimal process variables setting in order to evaluate the optimization capability of the models generated according to IV-optimal design. The microspheres showed high E.E. (74.14 ± 0.015% to 85.34 ± 0.011%) and suitably sustained drug release (minimum; 40% to 60%; maximum) over a period of 12 h. The optimized microspheres formulation showed E.E. of 84.87 ± 0.005 with small error value (1.39). The low magnitudes of error and the significant value of R{sup 2} in the present investigation prove the high prognostic ability of the design. The absence of interactions between drug and polymers was confirmed by Fourier transform infrared (FTIR) spectroscopy. Differential scanning calorimetry (DSC) and X-ray powder diffractometry (XRPD) revealed the dispersion of drug within microspheres formulation. The microspheres were found to be discrete, spherical with smooth surface. The results demonstrate that these microspheres could be promising delivery system to sustain the drug release and improve the E.E. thus prolong drug action and achieve the highest healing effect with minimal gastrointestinal side effects. - Highlights: • Aceclofenac microspheres

Drug use trajectory patterns among older drug users

Directory of Open Access Journals (Sweden)

Tyndall B

2011-05-01

Full Text Available Miriam Boeri, Thor Whalen, Benjamin Tyndall, Ellen BallardKennesaw State University, Department of Sociology and Criminal Justice, Kennesaw GA, USAAbstract: To better understand patterns of drug use trajectories over time, it is essential to have standard measures of change. Our goal here is to introduce measures we developed to quantify change in drug use behaviors. A secondary goal is to provide effective visualizations of these trajectories for applied use. We analyzed data from a sample of 92 older drug users (ages 45 to 65 to identify transition patterns in drug use trajectories across the life course. Data were collected for every year since birth using a mixed methods design. The community-drawn sample of active and former users were 40% female, 50% African American, and 60% reporting some college or greater. Their life histories provided retrospective longitudinal data on the diversity of paths taken throughout the life course and changes in drug use patterns that occurred over time. Bayesian analysis was used to model drug trajectories displayed by innovative computer graphics. The mathematical techniques and visualizations presented here provide the foundation for future models using Bayesian analysis. In this paper we introduce the concepts of transition counts, transition rates and relapse/remission rates, and we describe how these measures can help us better understand drug use trajectories. Depicted through these visual tools, measurements of discontinuous patterns provide a succinct view of individual drug use trajectories. The measures we use on drug use data will be further developed to incorporate contextual influences on the drug trajectory and build predictive models that inform rehabilitation efforts for drug users. Although the measures developed here were conceived to better examine drug use trajectories, the applications of these measures can be used with other longitudinal datasets.Keywords: drug use, trajectory patterns

Tocopheryl pullulan-based self assembling nanomicelles for anti-cancer drug delivery

Energy Technology Data Exchange (ETDEWEB)

Wang, Jingyun, E-mail: wangjingyun67@dlut.edu.cn [School of Life Science and Biotechnology, Dalian University of Technology, Dalian 116024 (China); Cui, Shuang [School of Life Science and Biotechnology, Dalian University of Technology, Dalian 116024 (China); Bao, Yongming, E-mail: biosci@dlut.edu.cn [School of Life Science and Biotechnology, Dalian University of Technology, Dalian 116024 (China); Xing, Jishuang [School of Life Science and Biotechnology, Dalian University of Technology, Dalian 116024 (China); Hao, Wenbo [Department of Physics and Chemistry, Heihe University, Heihe 164300 (China)

2014-10-01

Amphiphilic α-tocopherol pullulan polymers (PUTC1, PUTC2, and PUTC3) with different degrees of substitution were synthesized as new carriers for anticancer drugs. The polymers easily self-assembled into nanomicelles through dialysis method. The critical micelle concentrations (CMCs) were 38.0, 8.0, and 4.3 mg/L for PUTC1, PUTC2, and PUTC3, respectively. 10-Hydroxycamptothecin (HCPT) used as a model drug was successfully loaded into the PUTC nanomicelles. Transmission electron microscopy images demonstrated that HCPT-loaded PUTC nanomicelles were almost spherical and had sizes ranging within 171.5–257.8 nm that increased with increased HCPT-loading content, as determined by dynamic laser scattering. The highest encapsulation efficiency of HCPT in PUTC nanomicelles reached 98.3%. The in vitro release of HCPT from PUTC micelles demonstrated sustained release for over 80 h. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assays showed that blank PUTC micelles were nontoxic to normal cells and that the HCPT-loaded PUTC2 nanomicelles showed higher cytotoxicity than the free drug, which was attributed to the enhanced cellular uptake of drug-loaded nanomicelles. Biodistribution experiments showed that PUTC micelles provided an excellent approach to rapid drug transport into cell nuclei. Moreover, the cellular uptake of micelles was found to be an energy-dependent and actin polymerization-associated endocytic process by endocytosis inhibition experiments. These results suggested that PUTC nanomicelles had considerable potential as a drug carrier for drug intracellular delivery in cancer therapy. - Highlights: • Tocopheryl pullulan-based (PUTC) self-assembling nanomicelles were fabricated. • These micelles showed low CMC and dispersed uniformly with regular spherical shape. • High entrapment efficiency and in vitro sustained release of HCPT in PUTC micelles • HCPT–PUTC micelles accumulated in cell nuclei and showed higher anticancer activity. �

Tocopheryl pullulan-based self assembling nanomicelles for anti-cancer drug delivery

International Nuclear Information System (INIS)

Wang, Jingyun; Cui, Shuang; Bao, Yongming; Xing, Jishuang; Hao, Wenbo

2014-01-01

Amphiphilic α-tocopherol pullulan polymers (PUTC1, PUTC2, and PUTC3) with different degrees of substitution were synthesized as new carriers for anticancer drugs. The polymers easily self-assembled into nanomicelles through dialysis method. The critical micelle concentrations (CMCs) were 38.0, 8.0, and 4.3 mg/L for PUTC1, PUTC2, and PUTC3, respectively. 10-Hydroxycamptothecin (HCPT) used as a model drug was successfully loaded into the PUTC nanomicelles. Transmission electron microscopy images demonstrated that HCPT-loaded PUTC nanomicelles were almost spherical and had sizes ranging within 171.5–257.8 nm that increased with increased HCPT-loading content, as determined by dynamic laser scattering. The highest encapsulation efficiency of HCPT in PUTC nanomicelles reached 98.3%. The in vitro release of HCPT from PUTC micelles demonstrated sustained release for over 80 h. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assays showed that blank PUTC micelles were nontoxic to normal cells and that the HCPT-loaded PUTC2 nanomicelles showed higher cytotoxicity than the free drug, which was attributed to the enhanced cellular uptake of drug-loaded nanomicelles. Biodistribution experiments showed that PUTC micelles provided an excellent approach to rapid drug transport into cell nuclei. Moreover, the cellular uptake of micelles was found to be an energy-dependent and actin polymerization-associated endocytic process by endocytosis inhibition experiments. These results suggested that PUTC nanomicelles had considerable potential as a drug carrier for drug intracellular delivery in cancer therapy. - Highlights: • Tocopheryl pullulan-based (PUTC) self-assembling nanomicelles were fabricated. • These micelles showed low CMC and dispersed uniformly with regular spherical shape. • High entrapment efficiency and in vitro sustained release of HCPT in PUTC micelles • HCPT–PUTC micelles accumulated in cell nuclei and showed higher anticancer activity. �

Monitor Sustainable Netherlands 2011

International Nuclear Information System (INIS)

2011-09-01

The Monitor provides an image of the sustainability of the Dutch society. It shows which areas are successful and what the 'concerns for tomorrow' are from the point of view of sustainability. An analysis is conducted of how the Netherlands are doing in the fields of climate change, biodiversity, health, knowledge, graying and social cohesion. These and many other topics are discussed in this monitor by means of a number of sustainability indicators and detail analyses [mk]. [nl

Monitor Sustainable Netherlands 2009

International Nuclear Information System (INIS)

2009-02-01

The Monitor provides an image of the sustainability of the Dutch society. It shows which areas are successful and what the 'concerns for tomorrow' are from the point of view of sustainability. An analysis is conducted of how the Netherlands are doing in the fields of climate change, biodiversity, health, knowledge, graying and social cohesion. These and many other topics are discussed in this monitor by means of a number of sustainability indicators and detail analyses [mk] [nl

Sustainability dilemmas in emerging economies

Directory of Open Access Journals (Sweden)

Rama K. Jayanti

2014-06-01

Full Text Available Increasing evidence of climate change is forcing businesses to play an active role in reducing sustainability burdens and preserving resources for future generations. Extant research on sustainability has an exclusive focus on developed countries with stringent environmental regulations and activist scrutiny. Emerging markets present interesting dilemmas since rapid mass urbanisation aimed at raising standards of living poses concomitant threats to environmental health. This round table aimed to showcase best practices in sustainability within the Indian business context. Insights from the discussion regarding sustainability dilemmas provide a fertile ground for bench marking global sustainability best practices.

Sustainability in Fashion Business Operations

Directory of Open Access Journals (Sweden)

Tsan-Ming Choi

2015-11-01

Full Text Available Under the global trend of sustainability, many companies selling fashion products have to reshape their operational strategies. Over the past few years, we have witnessed many fashion companies going green by re-engineering their business processes and establishing their formal sustainability programs. Many important topics, such as closed-loop supply chain management, corporate social responsibility, and economic sustainability, are all related to sustainable fashion business operations management. This paper provides a brief review of these critical topics, introduces the special issue, and proposes future research areas to achieve sustainable operations management in the fashion business.

The application of halloysite tubule nanoclay in drug delivery.

Science.gov (United States)

Lvov, Yuri M; DeVilliers, Melgardt M; Fakhrullin, Rawil F

2016-07-01

Natural and biocompatible clay nanotubes are among the best inorganic materials for drug nanoformulations. These halloysite tubes with SiO2 on the outermost surface have diameter of ca. 50 nm, length around 1 micrometer and may be loaded with drugs at 10-30 wt. %. Narrow tube openings allow for controllable sustained drug release for hours, days or even weeks. Physical-chemical properties of these nanotubes are described followed by examples of drug-loading capabilities, release characteristics, and control of duration of release through the end tube capping with polymers. Development of halloysite-polymer composites such as tissue scaffolds and bone cement/dentist resin formulations with enhanced mechanical properties and extension of the drug release to 2-3 weeks are described. Examples of the compression properties of halloysite in tablets and capsules are also shown. We expect that clay nanotubes will be used primarily for non-injectable drug formulations, such as topical and oral dosage forms, cosmetics, as well as for composite materials with enhanced therapeutic effects. These include tissue scaffolds, bone cement and dentist resins with sustained release of antimicrobial and cell growth-promoting medicines (including proteins and DNA) as well as other formulations such as compounds for antiseptic treatment of hospitals.

[Economic sustainability of therapies: considerations following the introduction of new drugs for hepatitis C virus].

Science.gov (United States)

Spandonaro, Federico

2014-06-01

The availability of new drugs potentially able to drastically reduce the burden of very common infectious diseases like hepatitis C requires the national health services to take a different decision-making process. On the one hand, there is an evident financial issue; on the other hand, low budgets may undermine a system that provides universal access to healthcare. It is unrealistic to expect retrieving the financial resources needed from negotiating prices with pharmaceutical companies, resource reallocation or a reduction in economic waste. The national health systems need a new priority setting and a National fund for healthcare innovation should be built. Novel drugs should be evaluated balancing availability and opportunity, forcing to rethink the decision-making processes. Macro- (re-prioritization of interventions) and micro-policies (the introduction of financial aspects in the process of pricing) are needed, trying to combine welfare and industrial policies.

Staircase To Sustainable Development

Directory of Open Access Journals (Sweden)

Doorasamy Mishelle

2015-06-01

Full Text Available The aim of this article to provide a theoretical framework on the concepts of Sustainable Development and the process that companies need to follow in order to ensure the future sustainability of business operations. Various secondary sources and previous literature was reviewed to clearly identify why companies are finding it difficult to conduct their business operations in a sustainable manner. Stricter legislation and regulations, increased competition, depletion of natural resources and market pressures have placed organisations under increased pressure to improve environmental performance and achieve eco-efficiency. This paper provides comprehensive overview of how companies can achieve the ‘Triple bottom line’ by committing to continuous improvement and adhering to the regulations stipulated according to the International Standards of Organisations (ISO14001.

Expanding the domain of drug delivery for HIV prevention: exploration of the transdermal route.

Science.gov (United States)

Puri, Ashana; Sivaraman, Arunprasad; Zhang, Wei; Clark, Meredith R; Banga, Ajay K

2017-01-01

Constant efforts for HIV prevention using antiretroviral drugs, pre- and postexposure prophylactic agents, and microbicides are being made by researchers. Drug-delivery systems such as oral tablets and coitally dependent vaginal gels are short acting, require daily application, and are associated with user adherence issues, whereas the coitally independent systems such as injectables and biodegradable implants are long acting, lasting several months, during which time the termination of prophylaxis is impractical in case of adverse effects. An effective drug-delivery system to be used for an intermediate duration, if available, would be an attractive alternative option for users in terms of adherence. Transdermal delivery systems, overcoming most of the limitations of the other routes of administration and aiming to provide sustained delivery of drugs through skin, may be explored for HIV prevention. Passive and physical enhancement techniques may be designed strategically to improve the transdermal delivery of HIV preventive agents.

Genome Analysis of the First Extensively Drug-Resistant (XDR Mycobacterium tuberculosis in Malaysia Provides Insights into the Genetic Basis of Its Biology and Drug Resistance.

Directory of Open Access Journals (Sweden)

Chee Sian Kuan

Full Text Available The outbreak of extensively drug-resistant tuberculosis (XDR-TB has become an increasing problem in many TB-burdened countries. The underlying drug resistance mechanisms, including the genetic variation favored by selective pressure in the resistant population, are partially understood. Recently, the first case of XDR-TB was reported in Malaysia. However, the detailed genotype family and mechanisms of the formation of multiple drugs resistance are unknown. We sequenced the whole genome of the UM 1072388579 strain with a 2-kb insert-size library and combined with that from previously sequenced 500-bp-insert paired-end reads to produce an improved sequence with maximal sequencing coverage across the genome. In silico spoligotyping and phylogenetic analyses demonstrated that UM 1072388579 strain belongs to an ancestral-like, non-Beijing clade of East Asia lineage. This is supported by the presence of a number of lineage-specific markers, including fadD28, embA, nuoD and pks7. Polymorphism analysis showed that the drug-susceptibility profile is correlated with the pattern of resistance mutations. Mutations in drug-efflux pumps and the cell wall biogenesis pathway such as mmpL, pks and fadD genes may play an important role in survival and adaptation of this strain to its surrounding environment. In this work, fifty-seven putative promoter SNPs were identified. Among them, we identified a novel SNP located at -4 T allele of TetR/acrR promoter as an informative marker to recognize strains of East Asian lineage. Our work indicates that the UM 1072388579 harbors both classical and uncommon SNPs that allow it to escape from inhibition by many antibiotics. This study provides a strong foundation to dissect the biology and underlying resistance mechanisms of the first reported XDR M. tuberculosis in Malaysia.

Self-assembled pentablock copolymers for selective and sustained gene delivery

Energy Technology Data Exchange (ETDEWEB)

Zhang, Bingqi [Iowa State Univ., Ames, IA (United States)

2011-05-15

The poly(diethylaminoethyl methacrylate) (PDEAEM) - Pluronic F127 - PDEAEM pentablock copolymer (PB) gene delivery vector system has been found to possess an inherent selectivity in transfecting cancer cells over non-cancer cells in vitro, without attaching any targeting ligands. In order to understand the mechanism of this selective transfection, three possible intracellular barriers to transfection were investigated in both cancer and non-cancer cells. We concluded that escape from the endocytic pathway served as the primary intracellular barrier for PB-mediated transfection. Most likely, PB vectors were entrapped and rendered non-functional in acidic lysosomes of non-cancer cells, but survived in less acidic lysosomes of cancer cells. The work highlights the importance of identifying intracellular barriers for different gene delivery systems and provides a new paradigm for designing targeting vectors based on intracellular differences between cell types, rather than through the use of targeting ligands. The PB vector was further developed to simultaneously deliver anticancer drugs and genes, which showed a synergistic effect demonstrated by significantly enhanced gene expression in vitro. Due to the thermosensitive gelation behavior, the PB vector packaging both drug and gene was also investigated for its in vitro sustained release properties by using polyethylene glycol diacrylate as a barrier gel to mimic the tumor matrix in vivo. Overall, this work resulted in the development of a gene delivery vector for sustained and selective gene delivery to tumor cells for cancer therapy.

Fractional laser-assisted drug uptake

DEFF Research Database (Denmark)

Banzhaf, Christina A; Thaysen-Petersen, Daniel; Bay, Christiane

2017-01-01

BACKGROUND AND OBJECTIVE: Ablative fractional laser (AFXL) is acknowledged to increase uptake of topically applied agents in skin. AFXL channels gradually close over time, which may impair this capability. The time frame for applying a drug after AFXL exposure remains to be established. The aim...... in laser-exposed and non-laser-exposed skin at 24-48 hours. CONCLUSIONS: The time frame to maintain enhanced drug delivery sustained for several hours after AFXL exposure, corresponding to channel morphology and loss of skin integrity. Lasers Surg. Med. 49:348-354, 2017. © 2016 Wiley Periodicals, Inc....

A rural/urban comparison of privacy and confidentiality concerns associated with providing sensitive location information in epidemiologic research involving persons who use drugs.

Science.gov (United States)

Rudolph, Abby E; Young, April M; Havens, Jennifer R

2017-11-01

Analyses that link contextual factors with individual-level data can improve our understanding of the "risk environment"; however, the accuracy of information provided by participants about locations where illegal/stigmatized behaviors occur may be influenced by privacy/confidentiality concerns that may vary by setting and/or data collection approach. We recruited thirty-five persons who use drugs from a rural Appalachian town and a Mid-Atlantic city to participate in in-depth interviews. Through thematic analyses, we identified and compared privacy/confidentiality concerns associated with two survey methods that (1) collect self-reported addresses/cross-streets and (2) use an interactive web-based map to find/confirm locations in rural and urban settings. Concerns differed more by setting than between methods. For example, (1) rural participants valued interviewer rapport and protections provided by the Certificate of Confidentiality more; (2) locations considered to be sensitive differed in rural (i.e., others' homes) and urban (i.e., where drugs were used) settings; and (3) urban participants were more likely to view providing cross-streets as an acceptable alternative to providing exact addresses for sensitive locations and to prefer the web-based map approach. Rural-urban differences in privacy/confidentiality concerns reflect contextual differences (i.e., where drugs are used/purchased, population density, and prior drug-related arrests). Strategies to alleviate concerns include: (1) obtain a Certificate of Confidentiality, (2) collect geographic data at the scale necessary for proposed analyses, and (3) permit participants to provide intersections/landmarks in close proximity to actual locations rather than exact addresses or to skip questions where providing an intersection/landmark would not obfuscate the actual address. Copyright © 2017 Elsevier Ltd. All rights reserved.

Sustainability in nursing: a concept analysis.

Science.gov (United States)

Anåker, Anna; Elf, Marie

2014-06-01

The aim of this study was to describe, explore and explain the concept of sustainability in nursing. Although researchers in nursing and medicine have emphasised the issue of sustainability and health, the concept of sustainability in nursing is undefined and poorly researched. A need exists for theoretical and empirical studies of sustainability in nursing. Concept analysis as developed by Walker and Avant. Data were derived from dictionaries, international healthcare organisations and literature searches in the CINAHL and MEDLINE databases. Inclusive years for the search ranged from 1990 to 2012. A total of fourteen articles were found that referred to sustainability in nursing. Sustainability in nursing involves six defining attributes: ecology, environment, future, globalism, holism and maintenance. Antecedents of sustainability require climate change, environmental impact and awareness, confidence in the future, responsibility and a willingness to change. Consequences of sustainability in nursing include education in the areas of ecology, environment and sustainable development as well as sustainability as a part of nursing academic programs and in the description of the academic subject of nursing. Sustainability should also be part of national and international healthcare organisations. The concept was clarified herein by giving it a definition. Sustainability in nursing was explored and found to contribute to sustainable development, with the ultimate goal of maintaining an environment that does not harm current and future generations' opportunities for good health. This concept analysis provides recommendations for the healthcare sector to incorporate sustainability and provides recommendations for future research. © 2014 The Authors. Scandinavian Journal of Caring Sciences published by John Wiley & Sons Ltd on behalf of Nordic College of Caring Science.

In vitro and in vivo evaluation of a hydrogel reservoir as a continuous drug delivery system for inner ear treatment.

Directory of Open Access Journals (Sweden)

Mareike Hütten

Full Text Available Fibrous tissue growth and loss of residual hearing after cochlear implantation can be reduced by application of the glucocorticoid dexamethasone-21-phosphate-disodium-salt (DEX. To date, sustained delivery of this agent to the cochlea using a number of pharmaceutical technologies has not been entirely successful. In this study we examine a novel way of continuous local drug application into the inner ear using a refillable hydrogel functionalized silicone reservoir. A PEG-based hydrogel made of reactive NCO-sP(EO-stat-PO prepolymers was evaluated as a drug conveying and delivery system in vitro and in vivo. Encapsulating the free form hydrogel into a silicone tube with a small opening for the drug diffusion resulted in delayed drug release but unaffected diffusion of DEX through the gel compared to the free form hydrogel. Additionally, controlled DEX release over several weeks could be demonstrated using the hydrogel filled reservoir. Using a guinea-pig cochlear trauma model the reservoir delivery of DEX significantly protected residual hearing and reduced fibrosis. As well as being used as a device in its own right or in combination with cochlear implants, the hydrogel-filled reservoir represents a new drug delivery system that feasibly could be replenished with therapeutic agents to provide sustained treatment of the inner ear.

Sustainable Agricultural Marketing Initiatives

Directory of Open Access Journals (Sweden)

Hakan Adanacıoğlu

2015-07-01

Full Text Available Sustainable marketing is a holistic approach that puts equal emphasis on environmental, social equity, and economic concerns in the development of marketing strategies. The purpose of the study is to examine and discuss the sustainable agricultural marketing initiatives practiced throughout the World and Turkey, and to put forth suggestions to further improve the performance of agricultural marketing initiatives in Turkey. Some of the sustainable agricultural marketing initiatives practiced around the world are carried out through civil organizations. Furthermore; some of these initiatives have also launched by farmers, consumers, food processors and retailers. The long-term strategies to increase these initiatives should be determined due to the fact that examples of successful sustainable agricultural marketing initiatives are inadequate and cannot be spread in Turkey. In this context, first of all, the supports provided by the government to improve agricultural marketing systems, such as EU funds for rural development should be compatible with the goals of sustainable marketing. For this purpose, it should be examined whether all proposed projects related to agricultural marketing meet the social, economic, and environmental principles of sustainable marketing. It is important that supporting organizations, especially civil society organisations, should take an active role for faster dissemination and adoption of sustainable agricultural marketing practices in Turkey. These organizations may provide technical assistance in preparing successful project proposals and training to farm groups. In addition, the other organizations, such as local administrations, producers' associations, cooperatives, can contribute to the success of sustainable agricultural marketing initiatives. The use of direct marketing strategies and vertical integration attempts in sustainable agricultural marketing initiatives that will likely be implemented in Turkey is

Sustained antimicrobial activity and reduced toxicity of oxidative biocides through biodegradable microparticles.

Science.gov (United States)

Sofokleous, Panagiotis; Ali, Shanom; Wilson, Peter; Buanz, Asma; Gaisford, Simon; Mistry, Dharmit; Fellows, Adrian; Day, Richard M

2017-12-01

The spread of antibiotic-resistant pathogens requires new treatments. Small molecule precursor compounds that produce oxidative biocides with well-established antimicrobial properties could provide a range of new therapeutic products to combat resistant infections. The aim of this study was to investigate a novel biomaterials-based approach for the manufacture, targeted delivery and controlled release of a peroxygen donor (sodium percarbonate) combined with an acetyl donor (tetraacetylethylenediamine) to deliver local antimicrobial activity via a dynamic equilibrium mixture of hydrogen peroxide and peracetic acid. Entrapment of the pre-cursor compounds into hierarchically structured degradable microparticles was achieved using an innovative dry manufacturing process involving thermally induced phase separation (TIPS) that circumvented compound decomposition associated with conventional microparticle manufacture. The microparticles provided controlled release of hydrogen peroxide and peracetic acid that led to rapid and sustained killing of multiple drug-resistant organisms (methicillin-resistant Staphylococcus aureus and carbapenem-resistant Escherichia coli) without associated cytotoxicity in vitro nor intracutaneous reactivity in vivo. The results from this study demonstrate for the first time that microparticles loaded with acetyl and peroxygen donors retain their antimicrobial activity whilst eliciting no host toxicity. In doing so, it overcomes the detrimental effects that have prevented oxidative biocides from being used as alternatives to conventional antibiotics. The manuscript explores a novel approach to utilize the antimicrobial activity of oxidative species for sustained killing of multiple drug-resistant organisms without causing collateral tissue damage. The results demonstrate, for the first time, the ability to load pre-cursor compounds into porous polymeric structures that results in their release and conversion into oxidative species in a

Is Sustainable Remediation Now a Self-Sustaining Process? an International Progress Report

Science.gov (United States)

Smith, J. W. N.

2014-12-01

Sustainable remediation - the consideration of environmental, social and economic factors associated with soil and groundwater risk-management options, to help select the best overall solution - has been a rapidly evolving topic in recent years. The first published reference[1] to 'sustainable remediation' was in the title of a 1999 conference paper by Kearney et al., (1999), but activity really accelerated in the middle-late 2000's, with establishment of a number of collaborative sustainable remediation groups and fora, and increased publication rates in the peer reviewed literature (Fig 1). Figure 1. Journal paper publications with search term 'sustainable remediation' (SCOPUS survey, 17 July 2014) This presentation will review the international progress of sustainable remediation concept development and application in regulatory and corporate decision-making processes. It will look back at what has already been achieved, provide an update on the latest initiatives and developments, and look forward to what the future of sustainable remediation might look like. Specifically it will describe: Sustainable remediation frameworks: synergies and international collaboration; Latest guidance and tools developed by the various sustainable remediation organisations (SuRFs), including the SuRF-UK Best Management Practices and Tier 1 Briefcase; Best practice standard development by ASTM and ISO; Regulatory acceptance of sustainable remediation, including incorporation into legislation, and the NICOLE - Common Forum Joint statement on 'risk-informed and sustainable remediation' in Europe; Examples of corporate adoption of sustainable remediation principles. The presentation will conclude with a look forward to a vision of sustainable remediation in 2020.

Cyclodextrin-PEG conjugate-wrapped magnetic ferrite nanoparticles for enhanced drug loading and release

Science.gov (United States)

Enoch, Israel V. M. V.; Ramasamy, Sivaraj; Mohiyuddin, Shanid; Gopinath, Packirisamy; Manoharan, R.

2018-05-01

Magnetic nanoparticles are envisaged to overcome the impediments in the methods of targeted drug delivery and hence cure cancer effectively. We report herein, manganese ferrite nanoparticles, coated with β-cyclodextrin-modified polyethylene glycol as a carrier for the drug, camptothecin. The particles are of the size of 100 nm and they show superparamagnetic behaviour. The saturation magnetization does not get diminished on polymer coverage of the nanoparticles. The β-cyclodextrin-polyethylene glycol conjugates are characterized using NMR and mass spectrometric techniques. By coating the magnetic nanoparticles with the cyclodextrin-tethered polymer, the drug-loading capacity is enhanced and the observed release of the drug is slow and sustained. The cell viability of HEK293 and HCT15 cells is evaluated and the cytotoxicity is enhanced when the drug is loaded in the polymer-coated magnetic nanoparticles. The noncovalent-binding based and enhanced drug loading on the nanoparticles and the sustained release make the nanocarrier a promising agent for carrying the payload to the target.

Extension Sustainability Camp: Design, Implementation, and Evaluation

Science.gov (United States)

Brain, Roslynn; Upton, Sally; Tingey, Brett

2015-01-01

Sustainability Camps provide an opportunity for Extension educators to be in the forefront of sustainability outreach and to meet the growing demand for sustainability education. This article shares development, implementation, and evaluation of an Extension Sustainability Camp for youth, grades 4-6. Camp impact was measured via daily pre-and…

Sustainable agriculture in the picture

International Nuclear Information System (INIS)

Brouwer, F.M.; De Bont, C.J.A.M.; Leneman, H.; Van der Meulen, H.A.B.

2004-01-01

Sustainable agriculture in the picture provides a systematic overview of the available data that are relevant for debate on transitions towards sustainable agriculture. Review for the agrocomplex, greenhouse horticulture, dairy farming and pig farming. Indicators on economy, environment, nature, animal welfare, human and animal health. Results achieved in practice for the three dimensions of sustainable agriculture, namely economics ('profit'), ecology ('planet') and socio-cultural ('people') [nl

Sustainable Design Re-Examined: Integrated Approach to Knowledge Creation for Sustainable Interior Design

Science.gov (United States)

Lee, Young S.

2014-01-01

The article focuses on a systematic approach to the instructional framework to incorporate three aspects of sustainable design. It also aims to provide an instruction model for sustainable design stressing a collective effort to advance knowledge creation as a community. It develops a framework conjoining the concept of integrated process in…

Annual Sustainability Report FY2015

Energy Technology Data Exchange (ETDEWEB)

2016-08-01

NREL's Sustainability Program is responsible for upholding all executive orders, federal regulations, U.S. Department of Energy (DOE) orders, and goals related to sustainable and resilient facility operations. But NREL continues to expand sustainable practices above and beyond the laboratory's regulations and requirements to ensure that the laboratory fulfills its mission into the future, leaves the smallest possible legacy footprint, and models sustainable operations and behaviors on national, regional, and local levels. The report, per the GRI reporting format, elaborates on multi-year goals relative to executive orders, achievements, and challenges; and success stories provide specific examples. A section called 'NREL's Resiliency is Taking Many Forms' provides insight into how NREL is drawing on its deep knowledge of renewable energy and energy efficiency to help mitigate or avoid climate change impacts.

Nanodiamonds as novel nanomaterials for biomedical applications: drug delivery and imaging systems.

Science.gov (United States)

Kaur, Randeep; Badea, Ildiko

2013-01-01

Detonation nanodiamonds (NDs) are emerging as delivery vehicles for small chemical drugs and macromolecular biotechnology products due to their primary particle size of 4 to 5 nm, stable inert core, reactive surface, and ability to form hydrogels. Nanoprobe technology capitalizes on the intrinsic fluorescence, high refractive index, and unique Raman signal of the NDs, rendering them attractive for in vitro and in vivo imaging applications. This review provides a brief introduction of the various types of NDs and describes the development of procedures that have led to stable single-digit-sized ND dispersions, a crucial feature for drug delivery systems and nanoprobes. Various approaches used for functionalizing the surface of NDs are highlighted, along with a discussion of their biocompatibility status. The utilization of NDs to provide sustained release and improve the dispersion of hydrophobic molecules, of which chemotherapeutic drugs are the most investigated, is described. The prospects of improving the intracellular delivery of nucleic acids by using NDs as a platform are exemplified. The photoluminescent and optical scattering properties of NDs, together with their applications in cellular labeling, are also reviewed. Considering the progress that has been made in understanding the properties of NDs, they can be envisioned as highly efficient drug delivery and imaging biomaterials for use in animals and humans.

Formulation and in vitro evaluation of sustained release matrix tablets using cross-linked natural gum.

Science.gov (United States)

Jamil, Qurratul Ain; Masood, Muhammad Irfan; Jamil, Muhammad Nauman; Masood, Imran; Iqbal, Shahid Muhammad

2017-03-01

Polysaccharide gums because of their biocompatibility, biodegradability and non-immunogenic properties are considered as the best choice for preparing sustained release tablets as compared to their synthetic counterpart. The cross linking of natural gums in matrix tablets increase the sustained release property of matrix tablets. Isoniazid is a first line therapy of tuberculosis, belongs to BCS I with half-life of 3-4 hours. These characteristics make isoniazid a good candidate for sustained release dosage form. Karaya gum crossed linked with trisodium tri metaphosphate was used as release rate retardant for preparing isoniazid cross-linked matrix tablet. Total 8 sustained release formulations were prepared. Both granules and tablets were evaluated under in vitro condition against different parameters. Dissolution studies were performed with all eight formulations for 12 hours using USP apparatus I. Four formulations designated as F1, F2, F3, F4 have drug and karaya gum while other four formulations F5, F6, F7, F8 have drug and crossed linked polymer in ratios of 1:1, 1:2, 1:3 and 1:4 respectively. Dissolution data was analyzed by using different kinetic models. Best fit model for most efficient formulation was zero order while release mechanism was super case I. Formulation 8 showed sufficiently slow release kinetics and about 83% of drug was released in 10 hours, indicating that cross-linked karaya gum proved efficient in preparing sustained release tablets.

Drug supply strategies, constraints and prospects in Nigeria.

Science.gov (United States)

Yusuff, K B; Tayo, F

2004-12-01

The study set out to identify the strategies for public drug supply in Nigeria, assess its functionality, and recommend appropriate means to ensure regular availability of safe, efficacious, good quality and affordable essential drugs at public health facilities. The investigation was carried out at the Directorate of Pharmaceutical services, Federal Ministry of Health (F.M.O.H) Abuja and Federal Medical Stores, Oshodi, Lagos. Semi-structured interview was conducted with key informants at the Department of Food & Drugs, Drug procurement unit and Central Medical store using structured questionnaires and direct informants answers. Our study shows that public drug supply in Nigeria is governed by a National Drug Policy (NDP) which was introduced in 1990 and it is yet to be reviewed after ten years. We also identified the Central Medical Store (CMS) system as the current public drug supply strategy in Nigeria. Public drug supply is mainly financed by governments and this is inadequate to ensure sustained availability of essential drugs. The major procurement methods in use are open tender and direct procurement. These methods as presently operated suffer from late order placement, delay in payment and poor supplier lead-time mainly attributable to lateness in payment for previous drug supplies. These have contributed to stock out of essential drugs at public health facilities. Major losses due to expiration and spoilage are recorded at both central and peripheral storage points despite adequacy of storage facilities and personnel. Road transportation was the major mode of drug distribution from central to peripheral storage points and shortage of vehicle was a key factor affecting drug distribution. There was an apparent lack of a functioning drug management information system to effectively coordinate public drug supply and there are no definite systems that monitor and evaluate staff performance. The CMS strategy currently used for public drug supply in Nigeria has

Sustainable Management of Food

Science.gov (United States)

To provide information to organizations to help them implement sustainable food management, including joining the Food Recovery Challenge. To provide education and information to communities and concerned citizens.

Sustained release of vancomycin from novel biodegradable nanofiber-loaded vascular prosthetic grafts: in vitro and in vivo study

OpenAIRE

Liu, Kuo-Sheng; Lee, Cheng-Hung; Wang, Yi-Chuan; Liu, Shih-Jung

2015-01-01

Kuo-Sheng Liu,1 Cheng-Hung Lee,2 Yi-Chuan Wang,3 Shih-Jung Liu3 1Department of Thoracic and Cardiovascular Surgery, Chang Gung Memorial Hospital, Linkou, Taiwan; 2Division of Cardiology, Department of Internal Medicine, Chang Gung Memorial Hospital, Linkou, Taiwan; 3Department of Mechanical Engineering, Chang Gung University, Tao-Yuan, Taiwan Abstract: This study describes novel biodegradable, drug-eluting nanofiber-loaded vascular prosthetic grafts that provide local and sustained...

Well-defined degradable brush polymer-drug conjugates for sustained delivery of Paclitaxel.

Science.gov (United States)

Yu, Yun; Chen, Chih-Kuang; Law, Wing-Cheung; Mok, Jorge; Zou, Jiong; Prasad, Paras N; Cheng, Chong

2013-03-04

To achieve a conjugated drug delivery system with high drug loading but minimal long-term side effects, a degradable brush polymer-drug conjugate (BPDC) was synthesized through azide-alkyne click reaction of acetylene-functionalized polylactide (PLA) with azide-functionalized paclitaxel (PTXL) and poly(ethylene glycol) (PEG). Well-controlled structures of the resulting BPDC and its precursors were verified by (1)H NMR and gel permeation chromatography (GPC) characterizations. With nearly quantitative click efficiency, drug loading amount of the BPDC reached 23.2 wt %. Both dynamic light scattering (DLS) analysis and transmission electron microscopy (TEM) imaging indicated that the BPDC had a nanoscopic size around 10-30 nm. The significant hydrolytic degradability of the PLA backbone of the BPDC was confirmed by GPC analysis of its incubated solution. Drug release study showed that PTXL moieties can be released through the cleavage of the hydrolyzable conjugation linkage in pH 7.4 at 37 °C, with 50% release in about 22 h. As illustrated by cytotoxicity study, while the polymeric scaffold of the BPDC is nontoxic, the BPDC exhibited higher therapeutic efficacy toward MCF-7 cancer cells than free PTXL at 0.1 and 1 μg/mL. Using Nile red as encapsulated fluorescence probe, cell uptake study showed effective internalization of the BPDC into the cells.

Provider and pharmacist responses to warfarin drug–drug interaction alerts: a study of healthcare downstream of CPOE alerts

Science.gov (United States)

Boro, Maureen S; Korman, Nancy E; Davoren, J Ben

2011-01-01

Objective To categorize the appropriateness of provider and pharmacist responses to warfarin critical drug–drug interaction (cDDI) alerts, assess responses and actions to the cDDI, and determine the occurrence of warfarin adverse drug events (ADE) after alerts. Design An 18-month, retrospective study of acute care admissions at a single Veterans Affairs medical center using computerized provider order entry (CPOE). Measurements Patients included had at least one warfarin cDDI alert. Chart reviews included baseline laboratory values and demographics, provider actions, patient outcomes, and associated factors, including other interacting medications and number of simultaneously processed alerts. Results 137 admissions were included (133 unique patients). Amiodarone, vitamin E in a multivitamin, sulfamethoxazole, and levothyroxine accounted for 75% of warfarin cDDI. Provider responses were clinically appropriate in 19.7% of admissions and pharmacist responses were appropriate in 9.5% of admissions. There were 50 ADE (36.6% of admissions) with warfarin; 80% were rated as having no or mild clinical effect. An increased number of non-critical alerts at the time of the reference cDDI alert was the only variable associated with an inappropriate provider response (p=0.01). Limitations This study was limited by being a retrospective review and the possibility of confounding variables, such as other interacting medications. Conclusion The large number of CPOE alerts may lead to inappropriate responses by providers and pharmacists. The high rate of ADE suggests a need for improved medication management systems for patients on warfarin. This study highlights the possibility of alert fatigue contributing to the high prevalence of inappropriate alert over-ride text responses. PMID:22037888

Engineering students' sustainability approaches

Science.gov (United States)

Haase, S.

2014-05-01

Sustainability issues are increasingly important in engineering work all over the world. This article explores systematic differences in self-assessed competencies, interests, importance, engagement and practices of newly enrolled engineering students in Denmark in relation to environmental and non-environmental sustainability issues. The empirical base of the article is a nation-wide, web-based survey sent to all newly enrolled engineering students in Denmark commencing their education in the fall term 2010. The response rate was 46%. The survey focused on a variety of different aspects of what can be conceived as sustainability. By means of cluster analysis, three engineering student approaches to sustainability are identified and described. The article provides knowledge on the different prerequisites of engineering students in relation to the role of sustainability in engineering. This information is important input to educators trying to target new engineering students and contribute to the provision of engineers equipped to meet sustainability challenges.

Drug development strategies for the treatment of obesity: how to ensure efficacy, safety, and sustainable weight loss

Directory of Open Access Journals (Sweden)

Barja-Fernandez S

2014-12-01

Full Text Available S Barja-Fernandez,1–3 R Leis,2 FF Casanueva,3,4 LM Seoane1,3 1Grupo Fisiopatología Endocrina, 2Departamento de Pediatría, Universidad de Santiago de Compostela (USC, Instituto de Investigación Sanitaria de Santiago de Compostela (IDIS, Complexo Hospitalario Universitario de Santiago (CHUS/SERGAS, Santiago de Compostela, Spain; 3CIBER Fisiopatologia de la Obesidad y Nutrición, Instituto de Salud Carlos III, Santiago de Compostela, Spain; 4Laboratorio de Endocrinología Molecular y Celular, Universidad de Santiago de Compostela (USC Instituto de Investigación Sanitaria de Santiago de Compostela (IDIS, Complexo Hospitalario Universitario de Santiago (CHUS/SERGAS, Santiago de Compostela, Spain Abstract: The prevalence of obesity has increased worldwide, and approximately 25%–35% of the adult population is obese in some countries. The excess of body fat is associated with adverse health consequences. Considering the limited efficacy of diet and exercise in the current obese population and the use of bariatric surgery only for morbid obesity, it appears that drug therapy is the only available method to address the problem on a large scale. Currently, pharmacological obesity treatment options are limited. However, new antiobesity drugs acting through central nervous system pathways or the peripheral adiposity signals and gastrointestinal tract are under clinical development. One of the most promising approaches is the use of peptides that influence the peripheral satiety signals and brain–gut axis such as GLP-1 analogs. However, considering that any antiobesity drug may affect one or several of the systems that control food intake and energy expenditure, it is unlikely that a single pharmacological agent will be effective as a striking obesity treatment. Thus, future strategies to treat obesity will need to be directed at sustainable weight loss to ensure maximal safety. This strategy will probably require the coadministration of medications

Heritage contribution in sustainable city

Science.gov (United States)

Rostami, R.; Khoshnava, S. M.; Lamit, H.

2014-02-01

The concept of sustainability has been an integral part of development work since the late 1970s. Sustainability is no longer a buzzword but a reality that must be addressed by cities all over the world. Increasing empirical evidence indicates that city sustainability is not just related to technical issues, such as carbon emissions, energy consumption and waste management, or on the economic aspects of urban regeneration and growth, but also it covers social well-being of different groups living within increasingly cosmopolitan towns and cities. Heritage is seen as a major component of quality of life, features that give a city its unique character and provide the sense of belonging that lies at the core of cultural identity. In other words, heritage by providing important social and psychological benefits enrich human life with meanings and emotions, and raise quality of life as a key component of sustainability. The purpose of this paper, therefore, is to examine the role that built cultural heritage can play within sustainable urban development.

Heritage contribution in sustainable city

International Nuclear Information System (INIS)

Rostami, R; Khoshnava, S M; Lamit, H

2014-01-01

The concept of sustainability has been an integral part of development work since the late 1970s. Sustainability is no longer a buzzword but a reality that must be addressed by cities all over the world. Increasing empirical evidence indicates that city sustainability is not just related to technical issues, such as carbon emissions, energy consumption and waste management, or on the economic aspects of urban regeneration and growth, but also it covers social well-being of different groups living within increasingly cosmopolitan towns and cities. Heritage is seen as a major component of quality of life, features that give a city its unique character and provide the sense of belonging that lies at the core of cultural identity. In other words, heritage by providing important social and psychological benefits enrich human life with meanings and emotions, and raise quality of life as a key component of sustainability. The purpose of this paper, therefore, is to examine the role that built cultural heritage can play within sustainable urban development

A pathway to a more sustainable water sector: sustainability-based asset management.

Science.gov (United States)

Marlow, D R; Beale, D J; Burn, S

2010-01-01

The water sectors of many countries are faced with the need to address simultaneously two overarching challenges; the need to undertake effective asset management coupled with the broader need to evolve business processes so as to embrace sustainability principles. Research has thus been undertaken into the role sustainability principles play in asset management. As part of this research, a series of 25 in-depth interviews were undertaken with water sector professionals from around Australia. Drawing on the results of these interviews, this paper outlines the conceptual relationship between asset management and sustainability along with a synthesis of the relevant opinions voiced in the interviews. The interviews indicated that the participating water authorities have made a strong commitment to sustainability, but there is a need to facilitate change processes to embed sustainability principles into business as usual practices. Interviewees also noted that asset management and sustainability are interlinked from a number of perspectives, especially in the way decision making is undertaken with respect to assets and service provision. The interviews also provided insights into the research needed to develop a holistic sustainability-based asset management framework.

Halloysite nanotubes-polymeric nanocomposites: characteristics, modifications and controlled drug delivery approaches

Directory of Open Access Journals (Sweden)

P. C. Ferrari

Full Text Available Abstract Halloysite nanotubes (HNTs are aluminosilicate nanoclay mineral which have a hollow tubular structure and occurs naturally. They are biocompatible and viable carrier for inclusion of biologically active molecules due to the empty space inside the tubular structure. In this article, the HNTs main characteristics, and the HNTs-polymeric nanocomposite formation and their potential application as improvement of the mechanical performance of polymers and entrapment of hydrophilic and lipophilic substances are summarized. Recent works covering the increment of HNTs-polymeric nanocomposites and presenting promising employment of these systems as nanosized carrier, being suitable for pharmaceutical and biomedical applications, based on earlier evidence in literature of its nature to sustain the release of loaded drugs, presenting low cytotoxicity, and providing evidence for controlled drug delivery are reviewed.

Diclofenac sodium sustained release hot melt extruded lipid matrices.

Science.gov (United States)

Vithani, K; Cuppok, Y; Mostafa, S; Slipper, I J; Snowden, M J; Douroumis, D

2014-08-01

Sustained release diclofenac sodium (Df-Na) solid lipid matrices with Compritol® 888 ATO were developed in this study. The drug/lipid powders were processed via cold and hot melt extrusion at various drug loadings. The influence of the processing temperatures, drug loading and the addition of excipients on the obtained dissolution rates was investigated. The physicochemical characterization of the extruded batches showed the existence of crystalline drug in the extrudates with a small amount being solubilized in the lipid matrix. The drug content and uniformity on the tablet surface were also investigated by using energy dispersive X-ray microanalysis. The dissolution rates were found to depend on the actual Df-Na loading and the nature of the added excipients, while the effect of the processing temperatures was negligible. The dissolution mechanism of all extruded formulations followed Peppas-Korsemeyer law, based on the estimated determination coefficients and the dissolution constant rates, indicating drug diffusion from the lipid matrices.

Poly(lactide-co-glycolide) encapsulated hydroxyapatite microspheres for sustained release of doxycycline

Energy Technology Data Exchange (ETDEWEB)

Wang Xiaoyun [School of Pharmacy, Shenyang Pharmaceutical University, 103, Wenhua Road, Shenyang 110016 (China); Department of Pharmacy, Shandong Drug and Food Vocational College, Science and Technology Town, Hightech Industrial Development Zone, Weihai 264210 (China); Xu Hui; Zhao Yanqiu [School of Pharmacy, Shenyang Pharmaceutical University, 103, Wenhua Road, Shenyang 110016 (China); Wang Shaoning, E-mail: wsn-xh@126.com [School of Pharmaceutical Engineering, Shenyang Pharmaceutical University, 103, Wenhua Road, Shenyang 110016 (China); Abe, Hiroya; Naito, Makio [Joining and Welding Research Institute, Osaka University, 11-1, Mihogaoka, Ibaraki, Osaka 567-0047 (Japan); Liu Yanli [School of Pharmacy, Shenyang Pharmaceutical University, 103, Wenhua Road, Shenyang 110016 (China); Wang Guoqing [School of Pharmaceutical Engineering, Shenyang Pharmaceutical University, 103, Wenhua Road, Shenyang 110016 (China)

2012-03-15

Highlights: Black-Right-Pointing-Pointer PLGA encapsulated HAP-MSs were used for the sustained delivery of Doxycycline (Doxy, a broad spectrum tetracycline antibiotic). Black-Right-Pointing-Pointer Sustained Doxy release without obvious burst was observed. Black-Right-Pointing-Pointer Mechanism of the sustained Doxy release was illustrated. Black-Right-Pointing-Pointer Sustained Doxy release character in vivo was also obtained, the plasma Doxy levels were relatively lower and steady compared to that of the un-encapsulated HAP-MSs. - Abstract: The purpose of this study was to prepare a poly(lactide-co-glycolide) (PLGA) encapsulated hydroxyapatite microspheres (HAP-MSs) as injectable depot for sustained delivery of Doxycycline (Doxy). Doxy loaded HAP-MSs (Doxy-HAP-MSs) were encapsulated with PLGA by solid-in-oil-in-water (S/O/W) emulsion-solvent evaporation technique, the effects of the PLGA used (various intrinsic viscosity and LA/GA ratio) and ratio of PLGA/HAP-MSs on the formation of Doxy-HAP-MSs and in vitro release of Doxy were studied. The results showed that sustained drug release without obvious burst was obtained by using PLGA encapsulated HAP-MSs as the carrier, also the drug release rate could be tailored by changing the ratio of PLGA/HAP-MSs, or PLGA of various intrinsic viscosities or LA/GA ratio. Lower ratio of PLGA/HAP-MSs corresponded faster Doxy release, e.g. for the microspheres of PLGA/HAP-MSs ratio of 8 and 0.25, the in vitro Doxy release percents at the end of 7days were about 23% and 76%, respectively. Higher hydrophilicity (higher ratio of GA to LA) and lower molecular weight of PLGA corresponded to higher Doxy release rates. For in vivo release study, PLGA encapsulated HAP-MSs were subcutaneously injected to the back of mice, and the results showed good correlation between the in vivo and in vitro drug release. Meanwhile, the plasma Doxy levels after subcutaneous administration of PLGA encapsulated Doxy-HAP-MSs were relatively lower and steady

Influence of Surface Chemistry on the Release of an Antibacterial Drug from Nanostructured Porous Silicon.

Science.gov (United States)

Wang, Mengjia; Hartman, Philip S; Loni, Armando; Canham, Leigh T; Bodiford, Nelli; Coffer, Jeffery L

2015-06-09

Nanostructured mesoporous silicon possesses important properties advantageous to drug loading and delivery. For controlled release of the antibacterial drug triclosan, and its associated activity versus Staphylococcus aureus, previous studies investigated the influence of porosity of the silicon matrix. In this work, we focus on the complementary issue of the influence of surface chemistry on such properties, with particular regard to drug loading and release kinetics that can be ideally adjusted by surface modification. Comparison between drug release from as-anodized, hydride-terminated hydrophobic porous silicon and the oxidized hydrophilic counterpart is complicated due to the rapid bioresorption of the former; hence, a hydrophobic interface with long-term biostability is desired, such as can be provided by a relatively long chain octyl moiety. To minimize possible thermal degradation of the surfaces or drug activity during loading of molten drug species, a solution loading method has been investigated. Such studies demonstrate that the ability of porous silicon to act as an effective carrier for sustained delivery of antibacterial agents can be sensitively altered by surface functionalization.

PAMAM dendrimer hydrogel film—biocompatible material to an efficient dermal delivery of drugs

Science.gov (United States)

Magalhães, Thamiris Machado; Guerra, Rodrigo Cinti; San Gil, Rosane Aguiar da Silva; Valente, Ana Paula; Simão, Renata Antoun; Soares, Bluma Guenther; Mendes, Thamara de Carvalho; Pyrrho, Alexandre dos Santos; Sousa, Valeria Pereira de; Rodrigues-Furtado, Vanessa Lúcia

2017-08-01

We report the preparation, characterization, and drug release kinetics of a pH-responsive hydrogel film from a dendrimer megamer. The megamer (GP32) is a three-dimensional reticulated structure with a mean diameter of 71.16 nm (PDI 0.150) and was prepared by the reaction between Poly(amidoamine) generation4 (PAMAM G4) dendrimer and glutaraldehyde (G:P molar ratio 32). The crosslinking units in the megamer are provided mainly by the bicyclic dimer 2-hydroxy-3,4,4a,7,8,8a-hexahydro-2 H-chromene-6-carbaldehyde as determined by high-resolution (800 MHz) 1H NMR and FTIR. The hydrogel film (F[GP32]) is formed upon evaporation of a methanolic solution of the megamer and has a high degree of organization and homogeneity. Further crosslinking with glutaraldehyde (CLF[GP32]) enhanced the mechanical properties of the hydrogel film. The chemical constitution and unique megamer architecture enable the hydrogel film to carry both lipophilic and hydrophilic substances. The film did not cause any dermal irritation or clinical signs of toxicity in tests on rabbits, allowed for a sustained release of ketoprofen and played an important role in the process of drug delivery into the receptor medium. This performance taken together with the absence of toxicity makes this hydrogel film a good choice for dermal sustained drug release. [Figure not available: see fulltext.

A holistic perspective on corporate sustainability drivers

NARCIS (Netherlands)

Lozano, R.

2013-01-01

Since company boards are increasingly discussing 'sustainability', it becomes necessary to examine the nature of sustainability drivers. Most approaches to corporate sustainability drivers have focused either on internal or external drivers. This paper is aimed at providing a more holistic

A holistic perspective on corporate sustainability drivers

NARCIS (Netherlands)

Lozano, Rodrigo|info:eu-repo/dai/nl/36412380X

2015-01-01

Since company boards are increasingly discussing 'sustainability', it becomes necessary to examine the nature of sustainability drivers. Most approaches to corporate sustainability drivers have focused either on internal or external drivers. This paper is aimed at providing a more holistic

Implementing Sustainability into Supply Chain Operations

DEFF Research Database (Denmark)

Jørsfeldt, Lilyana Makarowa

2016-01-01

empirical studies have investigated in detail how sustainability agendas are implemented or how they affect supply chain operations. These studies have mostly investigated the impact of implementation, explored the relationship between strategy formulation and performance, or provided descriptions...... chain practices? Research Question 2. How does a new agenda of sustainability affect supplier-buyer relationships? Research Question 3. How does operational coordination between suppliers and customers change with the introduction of a sustainability agenda? To answer these specific research questions...... and present a simplified model to explore the complexity of the phenomenon. (2) Means for the deployment (i.e., successful implementation) of a sustainability agenda in supply chain practices are identified. The discussion of means provides some explanations for relationships among frameworks components. More...

[Preparation of hydrophilic matrix sustained release tablets of total lactones from Andrographis paniculata and study on its in vitro release mechanism].

Science.gov (United States)

Xu, Fang-Fang; Shi, Wei; Zhang, Hui; Guo, Qing-Ming; Wang Zhen-Zhong; Bi, Yu-An; Wang, Zhi-Min; Xiao, Wei

2015-01-01

In this study, hydrophilic matrix sustained release tablets of total lactones from Andrographis paniculata were prepared and the in vitro release behavior were also evaluated. The optimal prescription was achieved by studying the main factor of the type and amount of hydroxypropyl methylcellulose (HPMC) using single factor test and evaluating through cumulative release of three lactones. No burst drug release from the obtained matrix tablets was observed. Drug release sustained to 14 h. The release mechanism of three lactones from A. paniculata was accessed by zero-order, first-order, Higuchi and Peppas equation. The release behavior of total lactones from A. paniculata was better agreed with Higuchi model and the drug release from the tablets was controlled by degradation of the matrix. The preparation of hydrophilic matrix sustained release tablets of total lactones from A. paniculata with good performance of drug release was simple.

Modulation of electrostatic interactions to improve controlled drug delivery from nanogels.

Science.gov (United States)

Mauri, Emanuele; Chincarini, Giulia M F; Rigamonti, Riccardo; Magagnin, Luca; Sacchetti, Alessandro; Rossi, Filippo

2017-03-01

The synthesis of nanogels as devices capable to maintain the drug level within a desired range for a long and sustained period of time is a leading strategy in controlled drug delivery. However, with respect to the good results obtained with antibodies and peptides there are a lot of problems related to the quick and uncontrolled diffusion of small hydrophilic molecules through polymeric network pores. For these reasons research community is pointing toward the use of click strategies to reduce release rates of the linked drugs to the polymer chains. Here we propose an alternative method that considers the electrostatic interactions between polymeric chains and drugs to tune the release kinetics from nanogel network. The main advantage of these systems lies in the fact that the carried drugs are not modified and no chemical reactions take place during their loading and release. In this work we synthesized PEG-PEI based nanogels with different protonation degrees and the release kinetics with charged and uncharged drug mimetics (sodium fluorescein, SF, and rhodamine B, RhB) were studied. Moreover, also the effect of counterion used to induce protonation was taken into account in order to build a tunable drug delivery system able to provide multiple release rates with the same device. Copyright © 2016 Elsevier B.V. All rights reserved.

Sustainable Supply Chain Based on News Articles and Sustainability Reports: Text Mining with Leximancer and DICTION

Directory of Open Access Journals (Sweden)

Dongwook Kim

2017-06-01

Full Text Available The purpose of this research is to explore sustainable supply chain management (SSCM trends, and firms’ strategic positioning and execution with regard to sustainability in the textile and apparel industry based on news articles and sustainability reports. Further analysis of the rhetoric in Chief executive officer (CEO letters within sustainability reports is used to determine firms’ resoluteness, positive entailments, sharing of values, perception of reality, and sustainability strategy and execution feasibility. Computer-based content analysis is used for this research: Leximancer is applied for text analysis, while dictionary-based text mining program DICTION and SPSS are used for rhetorical analysis. Overall, contents similar to the literature on environmental, social, and economic aspects of the triple bottom line (TBL are observed, however, topics such as regulation, green incentives, and international standards are not readily observed. Furthmore, ethical issues, sustainable production, quality, and customer roles are emphasized in texts analyzed. The CEO letter analysis indicates that listed firms show relatively low realism and high commonality, while North American firms exhibit relatively high commonality, and Europe firms show relatively high realism. The results will serve as a baseline for providing academia guidelines in SSCM research, and provide an opportunity for businesses to complement their sustainability strategies and executions.

Drug Retention Times

Energy Technology Data Exchange (ETDEWEB)

Center for Human Reliability Studies

2007-05-01

The purpose of this monograph is to provide information on drug retention times in the human body. The information provided is based on plausible illegal drug use activities that might be engaged in by a recreational drug user.

Recombinant human serum albumin hydrogel as a novel drug delivery vehicle

International Nuclear Information System (INIS)

Hirose, Masaaki; Tachibana, Akira; Tanabe, Toshizumi

2010-01-01

Serum albumin acts as a physiological carrier for various compounds including drugs. A hydrogel consisting of recombinant human serum albumin (rHSA) was prepared to take advantage of drug binding ability of albumin for a sustained drug release carrier. The hydrogel was prepared by mixing rHSA and dithiothreitol and casted to a polystyrene mold. Hydrogel formation was thought to occur through the intermolecular interaction of the hydrophobic groups by protein denaturation. The release of sodium benzoate and salicylic acid from the hydrogel completed in 2 h, while warfarin release continued for 24 h. The total amounts of the drugs released from 100 mg of 15 and 5% rHSA hydrogel were 2.3 and 1.4 μmol for warfarin, 1.4 and 1.1 μmol for salicylic acid and 0.9 and 0.9 μmol for sodium benzoate. These results reflected the order of the binding ability of drugs for intact albumin indicating that the drug binding ability of HSA still remained after the hydrogel formation. However, fibroblast cells attached and proliferated well on the hydrogel, indicating that denaturation of rHSA proceeded to the extent to allow the cell attachment. The present rHSA hydrogel might be suitable for a sustained release carrier of drugs having affinity for albumin.

Recombinant human serum albumin hydrogel as a novel drug delivery vehicle

Energy Technology Data Exchange (ETDEWEB)

Hirose, Masaaki, E-mail: Hirose.Masaaki@mh.mt-pharma.co.jp [Advanced Medical Research Laboratory, Research Division, Mitsubishi Tanabe Pharma Corporation, 3-16-89 Kashima, Yodogawa-ku, Osaka 532-8505 (Japan); Department of Applied Chemistry and Bioengineering, Graduate School of Engineering, Osaka City University, 3-3-138 Sugimoto, Sumiyoshi-ku, Osaka 558-8585 (Japan); Tachibana, Akira; Tanabe, Toshizumi [Department of Applied Chemistry and Bioengineering, Graduate School of Engineering, Osaka City University, 3-3-138 Sugimoto, Sumiyoshi-ku, Osaka 558-8585 (Japan)

2010-06-15

Serum albumin acts as a physiological carrier for various compounds including drugs. A hydrogel consisting of recombinant human serum albumin (rHSA) was prepared to take advantage of drug binding ability of albumin for a sustained drug release carrier. The hydrogel was prepared by mixing rHSA and dithiothreitol and casted to a polystyrene mold. Hydrogel formation was thought to occur through the intermolecular interaction of the hydrophobic groups by protein denaturation. The release of sodium benzoate and salicylic acid from the hydrogel completed in 2 h, while warfarin release continued for 24 h. The total amounts of the drugs released from 100 mg of 15 and 5% rHSA hydrogel were 2.3 and 1.4 {mu}mol for warfarin, 1.4 and 1.1 {mu}mol for salicylic acid and 0.9 and 0.9 {mu}mol for sodium benzoate. These results reflected the order of the binding ability of drugs for intact albumin indicating that the drug binding ability of HSA still remained after the hydrogel formation. However, fibroblast cells attached and proliferated well on the hydrogel, indicating that denaturation of rHSA proceeded to the extent to allow the cell attachment. The present rHSA hydrogel might be suitable for a sustained release carrier of drugs having affinity for albumin.

Towards a sustainable use of primary boron. Approach to a sustainable use of primary resources

NARCIS (Netherlands)

Henckens, M.L.C.M.; Driessen, P.P.J.; Worrell, E.

2015-01-01

The sustainable use of raw materials does not only concern the environmental impacts of their production and consumption, but also the intergenerational distribution of access to the raw material or the services provided by that material. From this sustainability perspective, current generations

Sustainability in School Building Design

Directory of Open Access Journals (Sweden)

B. Ece ŞAHİN

2015-03-01

Full Text Available Sustainable construction is important for the continuation of life in a healthy world for futuregenerations; many issues affecting the quality of life such as effective use of resources, take advantage ofrenewable energy, the choice of recyclable materials that do not harm the environment and waterconservation are considered in the context of sustainable design. Implementations carried out in thisframework are regarded as valuable due to providing the consciousness of sustainability to the society.Creating the awareness of sustainability is given a great importance by educators; thus, “education forsustainability” are included from the preschool program so that children can learn the gainings of suchperspective in their early ages. In support of this concept, it is believed that education structures should bea laboratory where children can practice theoretical knowledge learned at school. In that respect, studiesneed to be considered in the context of sustainable construction are studied in this research. In the study,after a description of the importance of sustainable design as a learning mean, significant subjects such asusing natural light, heating, cooling and air-conditioning methods, wind energy, water protection andmaterial selection are analyzed in terms of designing sustainable schools. It is criticized worldwide thatstructures ground on sustainable design principles are relatively few in numbers. Despite, there is anincreasing interest to the subject in Turkey later years; a lot more steps are required in terms ofimplementation and research of the issue. Thus, the purpose of the study is to provide a supplementaryreference for school designs.

Sustaining Nurse-Led Task-Shifting Strategies for Hypertension Control: A Concept Mapping Study to Inform Evidence-Based Practice.

Science.gov (United States)

Blackstone, Sarah; Iwelunmor, Juliet; Plange-Rhule, Jacob; Gyamfi, Joyce; Quakyi, Nana Kofi; Ntim, Micheal; Ogedegbe, Gbenga

2017-10-01

The use of task-shifting is an increasingly widespread delivery approach for health interventions targeting prevention, treatment, and control of hypertension in adults living in sub-Saharan Africa (SSA). Addressing a gap in the literature, this research examined the sustainability of an ongoing task-shifting strategy for hypertension (TASSH) from the perspectives of community health nurses (CHNs) implementing the program. We used concept-mapping, a mixed-methods participatory approach to understand CHNs' perceptions of barriers and enablers to sustaining a task-shifting program. Participants responded to focal prompts, eliciting statements regarding perceived barriers and enablers to sustaining TASSH, and then rated these ideas based on importance to the research questions and feasibility to address. Twenty-eight community health nurses (21 women, 7 men) from the Ashanti region of Ghana completed the concept-mapping process. Factors influencing sustainability were grouped into five categories: Limited Drug Supply, Financial Support, Provision of Primary Health Care, Personnel Training, and Patient-Provider Communication. The limited supply of antihypertensive medication was considered by CHNs as the most important item to address, while providing training for intervention personnel was considered most feasible to address. This study's findings highlight the importance of examining nurses' perceptions of factors likely to influence the sustainability of evidence-based, task-shifting interventions. Nurses' perceptions can guide the widespread uptake and dissemination of these interventions in resource-limited settings. © 2017 Sigma Theta Tau International.

Global sustainable timber supply and demand

Science.gov (United States)

Peter J. Ince

2010-01-01

Industrial timber use has provided timber revenue that has helped make timber supply and demand more sustainable in the leading timber producing regions of the world. Sustainable development implies not consuming more resources today than we can replace tomorrow, but sustainable forest management implies more than merely a non-declining supply of timber. Forests as a...

Thermal and Isothermal Methods in Development of Sustained Release Dosage Forms of Ketorolac Tromethamine

Directory of Open Access Journals (Sweden)

Dimple Chopra

2008-01-01

Full Text Available Differential scanning calorimetry (DSC is a rapid and convenient and conclusive method of screening drug-polymer blend during preformulation studies as it allows polymer incompatibility to be established instantaneously. Various batches of matrix tablets of ketorolac tromethamine (KTM with a series of compatible polymers were prepared. Batches of tablets which gave desired sustained release profile were subjected to stability testing according to ICH guidelines. The analysis for drug content was done using high performance liquid chromatography (HPLC method. The results revealed that there was no statistically significant change in drug content after storage of matrix tablets at elevated temperature of 40°C and 75% relative humidity. From our study we conclude that with careful selection of different polymers and their combinations, a stable sustained release oral dosage form of ketorolac tromethamine can be achieved.

The generic drug user fee amendments: an economic perspective

Science.gov (United States)

Berndt, Ernst R; Murphy, Stephen J

2018-01-01

Abstract Since the vast majority of prescription drugs consumed by Americans are off patent (‘generic’), their regulation and supply is of wide interest. We describe events leading up to the US Congress's 2012 passage of the Generic Drug User Fee Amendments (GDUFA I) as part of the Food and Drug Administration Safety and Innovation Act (FDASIA). Under GDUFA I, generic manufacturers agreed to pay approximately $300 million in fees each year of the five-year program. In exchange, the US Food and Drug Administration (FDA) committed to performance goals. We describe GDUFA I’s FDA commitments, provisions, goals, and annual fee structure and compare it to that entailed in the authorization and implementation of GDUFA II on October 1, 2017. We explain how user fees required under GDUFA I erected barriers to entry and created scale and scope economies for incumbent manufacturers. Congress changed user fees under GDUFA II in part to lessen these incentives. In order to initiate and sustain user fees under GDUFA legislation, FDA requires the submission of self-reported data on generic manufacturers including domestic and foreign facilities. These data are public and our examination of them provides an unprecedented window into the recent organization of generic drug manufacturers supplying the US market. Our results suggest that generic drug manufacturing is increasingly concentrated and foreign. We discuss the implications of this observed market structure for GDUFA II’s implementation among other outcomes. PMID:29707218

Sustainable machining

CERN Document Server

2017-01-01

This book provides an overview on current sustainable machining. Its chapters cover the concept in economic, social and environmental dimensions. It provides the reader with proper ways to handle several pollutants produced during the machining process. The book is useful on both undergraduate and postgraduate levels and it is of interest to all those working with manufacturing and machining technology.

Dissolution rate enhancement of the poorly water-soluble drug Tibolone using PVP, SiO2, and their nanocomposites as appropriate drug carriers.

Science.gov (United States)

Papadimitriou, Sofia; Bikiaris, Dimitrios

2009-09-01

Creation of immediate release formulations for the poorly water-soluble drug Tibolone through the use of solid dispersions (SDs). SD systems of Tibolone (Tibo) with poly(vinylpyrrolidone) (PVP), fumed SiO(2) nanoparticles, and their corresponding ternary systems (PVP/SiO(2)/Tibo) were prepared and studied in order to produce formulations with enhanced drug dissolution rates. The prepared SDs were characterized by the use of differential scanning calorimetry and wide-angle X-ray diffractometry techniques. Also dissolution experiments were performed. From the results it was concluded that PVP as well as SiO(2) can be used as appropriate carriers for the amorphization of Tibo, even when the drug is used at high concentrations (20-30%, w/w). This is due to the evolved interactions taking place between the drug and the used carriers, as was verified by Fourier transform infrared spectroscopy. At higher concentrations the drug was recrystallized. Similar are the observations on the ternary PVP/SiO(2)/Tibo SDs. The dissolution profiles of the drug in PVP/Tibo and SiO(2)/Tibo SDs are directly dependent on the physical state of the drug. Immediately release rates are observed in SD with low drug concentrations, in which Tibo was in amorphous state. However, these release profiles are drastically changed in the ternary PVP/SiO(2)/Tibo SDs. An immediate release profile is observed for low drug concentrations and an almost sustained release as the concentration of Tibo increases. This is due to the weak interactions that take place between PVP and SiO(2), which result in alterations of the characteristics of the carrier (PVP/SiO(2) nanocomposites). Immediate release formulation was created for Tibolone as well as new nanocomposite matrices of PVP/SiO((2)), which drastically change the release profile of the drug to a sustained delivery.

Sustainable Urban Transport Planning

Directory of Open Access Journals (Sweden)

Boitor Melania R.

2013-07-01

Full Text Available Environmental protection has become a common issue in every area, but extremely important for the domains which deal with intensive energy consumption as it is the case of the transportation. Achieving the sustainable cities on the other hand, is also focused on the protection of the environment in order to provide a higher quality of life for the population. Therefore it is considered that by improving the urban transportation planning additional benefits could be provided for both the environment and the sustainable development of the cities. One possibility is to supplement the traditionally land-use plans with the transportrelated zones analysis, where the city is divided in public transport, pedestrian and caroriented zones. Analyzing the transport-related zones of a city is important as it provides additional information in the assessment of the development trend. The process of zoning was conducted for the city of Cluj-Napoca, Romania. In this paper, the outcome of the zoning was analyzed for a more comprehensive review of the urban transport in order to attain a sustainable-oriented approach of the urban area development.

Towards Intelligently - Sustainable Cities?

Directory of Open Access Journals (Sweden)

Luca Salvati

2013-04-01

Full Text Available In the quest for achieving sustainable cities, Intelligent and Knowledge City Programmes (ICPs and KCPs represent cost-efficient strategies for improving the overall performance of urban systems. However, even though nobody argues on the desirability of making cities “smarter”, the fundamental questions of how and to what extent can ICPs and KCPs contribute to the achievement of urban sustainability lack a precise answer. In the attempt of providing a structured answer to these interrogatives, this paper presents a methodology developed for investigating the modalities through which ICPs and KCPs contribute to the achievement or urban sustainability. Results suggest that ICPs and KCPs efficacy lies in supporting cities achieve a sustainable urban metabolism through optimization, innovation and behavior changes.

Sustained Pulmonary Delivery of a Water-Soluble Antibiotic Without Encapsulating Carriers.

Science.gov (United States)

Ong, Winston; Nowak, Pawel; Cu, Yen; Schopf, Lisa; Bourassa, James; Enlow, Elizabeth; Moskowitz, Samuel M; Chen, Hongming

2016-03-01

Traditional polymeric nanoparticle formulations for prolonged local action during inhalation therapy are highly susceptible to muco-ciliary clearance. In addition, polymeric carriers are typically administered in high doses due to finite drug loading. For toxicological reasons, these carriers and their degradation byproducts are undesirable for inhalation therapy, particularly for chronic use, due to potential lung accumulation. We synthesized a novel, insoluble prodrug (MRPD) of a time-dependent β-lactam, meropenem, and formulated MRPD into mucus-penetrating crystals (MRPD-MPCs). After characterizing their mucus mobility (in vitro) and stability, we evaluated the lung pharmacokinetics of intratracheally-instilled MRPD-MPCs and a meropenem solution in guinea pigs. Meropenem levels rapidly declined in the lungs of guinea pigs receiving meropenem solution compared to those given MRPD-MPCs. At 9 h after dosing, drug levels in the lungs of animals that received meropenem solution dropped to 12 ng/mL, whereas those that received MRPD-MPCs maintained an average drug level of ≥1,065 ng/mL over a 12-h period. This work demonstrated that the combination of prodrug chemistry and mucus-penetrating platform created nanoparticles that produced sustained levels of meropenem in guinea pig lungs. This strategy represents a novel approach for sustained local drug delivery to the lung without using encapsulating matrices.

Porous Iron-Carboxylate Metal-Organic Framework: A Novel Bioplatform with Sustained Antibacterial Efficacy and Nontoxicity.

Science.gov (United States)

Lin, Sha; Liu, Xiangmei; Tan, Lei; Cui, Zhenduo; Yang, Xianjin; Yeung, Kelvin W K; Pan, Haobo; Wu, Shuilin

2017-06-07

Sustained drug release plays a critical role in targeting the therapy of local diseases such as bacterial infections. In the present work, porous iron-carboxylate metal-organic framework [MOF-53(Fe)] nanoparticles (NPs) were designed to entrap the vancomycin (Van) drugs. This system exhibited excellent chemical stability under acidic conditions (pH 7.4, 6.5, and 5.5) and much higher drug-loading capability because of the high porosity and large surface area of MOF NPs. The results showed that the drug-loading ratio of Van could reach 20 wt % and that the antibacterial ratio of the MOF-53(Fe)/Van system against Staphylococcus aureus could reach up to 90%. In addition, this MOF-53(Fe)/Van system exhibited excellent biocompatibility because of its chemical stability and sustained release of iron ions. Hence, these porous MOF NPs are a promising bioplatform not only for local therapy of bacterial infections but also for other biomedical therapies for tissue regeneration.

Strategic Decision Making for Organizational Sustainability: The Implications of Servant Leadership and Sustainable Leadership Approaches

OpenAIRE

Judita Peterlin; Noel J. Pearse; Vlado Dimovski

2015-01-01

This conceptual paper explores the implications of servant leadership and sustainable leadership for strategic decision making by the top management of an organization. It is argued that a different type of leadership is required if effective strategic decisions are to be made in organizations striving to become more sustainable and that servant leadership and sustainable leadership approaches provide a sound basis to inform these decisions. The contributions of these two leadership approache...

Electrospun water-stable zein/ethyl cellulose composite nanofiber and its drug release properties

Energy Technology Data Exchange (ETDEWEB)

Lu, Hangyi; Wang, Qingqing; Li, Guohui [Key Laboratory of Eco-textiles, Jiangnan University, Wuxi (China); Qiu, Yuyu [Key Laboratory of Eco-textiles, Jiangnan University, Wuxi (China); Laboratory of Natural Medicine, Wuxi Medical School, Jiangnan University (China); Wei, Qufu, E-mail: qfwei@jiangnan.edu.cn [Key Laboratory of Eco-textiles, Jiangnan University, Wuxi (China)

2017-05-01

A simple and cost-effective way to prepare water-stable zein-based nanofibers for potential drug delivery was presented in this article. Corn protein zein was co-electrospun with hydrophobic ethyl cellulose. Indomethacin, as a model drug, was incorporated in situ into the composite nanofibers. Scanning electron microscopy and element mapping revealed the morphologies of drug-loaded nanofibers and drug distribution, respectively. Fourier transform infrared spectra confirmed the physical blending among the components. Differential scanning calorimetry and X-ray diffraction demonstrated the physical state of drug and polymers in the nanofiber matrix. The composite nanofibers showed a sustained diffusion-controlled release according to the results of in vitro dissolution tests. - Highlights: • A simple, non-toxic and cost-effective way to improve water stability of zein nanofibers was proposed. • Electrospun zein/ethyl cellulose nanofibers with improved water stability and mechanical strength were prepared. • Indomethacin was homogeneously distributed in the zein/ethyl cellulose nanofibers with no aggregation or cluster. • The zein/ethyl cellulose nanofibers presented a sustained drug release profile, following Fickican diffusion mechanism.

Development and evaluation of Ketoprofen sustained release matrix tablet using Hibiscus rosa-sinensis leaves mucilage

Directory of Open Access Journals (Sweden)

M. Kaleemullah

2017-07-01

Full Text Available Currently, the use of natural gums and mucilage is of increasing importance in pharmaceutical formulations as valuable drug excipient. Natural plant-based materials are economic, free of side effects, biocompatible and biodegradable. Therefore, Ketoprofen matrix tablets were formulated by employing Hibiscus rosa-sinensis leaves mucilage as natural polymer and HPMC (K100M as a synthetic polymer to sustain the drug release from matrix system. Direct compression method was used to develop sustained released matrix tablets. The formulated matrix tablets were evaluated in terms of physical appearance, weight variation, thickness, diameter, hardness, friability and in vitro drug release. The difference between the natural and synthetic polymers was investigated concurrently. Matrix tablets developed from each formulation passed all standard physical evaluation tests. The dissolution studies of formulated tablets revealed sustained drug release up to 24 h compared to the reference drug Apo Keto® SR tablets. The dissolution data later were fitted into kinetic models such as zero order equation, first order equation, Higuchi equation, Hixson Crowell equation and Korsmeyer-Peppas equation to study the release of drugs from each formulation. The best formulations were selected based on the similarity factor (f2 value of 50% and more. Through the research, it is found that by increasing the polymers concentration, the rate of drug release decreased for both natural and synthetic polymers. The best formulation was found to be F3 which contained 40% Hibiscus rosa-sinensis mucilage polymer and showed comparable dissolution profile to the reference drug with f2 value of 78.03%. The release kinetics of this formulation has shown to follow non-Fickian type which involved both diffusion and erosion mechanism. Additionally, the statistical results indicated that there was no significant difference (p > 0.05 between the F3 and reference drug in terms of MDT and

Development and evaluation of Ketoprofen sustained release matrix tablet using Hibiscus rosa-sinensis leaves mucilage.

Science.gov (United States)

Kaleemullah, M; Jiyauddin, K; Thiban, E; Rasha, S; Al-Dhalli, S; Budiasih, S; Gamal, O E; Fadli, A; Eddy, Y

2017-07-01

Currently, the use of natural gums and mucilage is of increasing importance in pharmaceutical formulations as valuable drug excipient. Natural plant-based materials are economic, free of side effects, biocompatible and biodegradable. Therefore, Ketoprofen matrix tablets were formulated by employing Hibiscus rosa-sinensis leaves mucilage as natural polymer and HPMC (K100M) as a synthetic polymer to sustain the drug release from matrix system. Direct compression method was used to develop sustained released matrix tablets. The formulated matrix tablets were evaluated in terms of physical appearance, weight variation, thickness, diameter, hardness, friability and in vitro drug release. The difference between the natural and synthetic polymers was investigated concurrently. Matrix tablets developed from each formulation passed all standard physical evaluation tests. The dissolution studies of formulated tablets revealed sustained drug release up to 24 h compared to the reference drug Apo Keto® SR tablets. The dissolution data later were fitted into kinetic models such as zero order equation, first order equation, Higuchi equation, Hixson Crowell equation and Korsmeyer-Peppas equation to study the release of drugs from each formulation. The best formulations were selected based on the similarity factor ( f 2 ) value of 50% and more. Through the research, it is found that by increasing the polymers concentration, the rate of drug release decreased for both natural and synthetic polymers. The best formulation was found to be F3 which contained 40% Hibiscus rosa-sinensis mucilage polymer and showed comparable dissolution profile to the reference drug with f 2 value of 78.03%. The release kinetics of this formulation has shown to follow non-Fickian type which involved both diffusion and erosion mechanism. Additionally, the statistical results indicated that there was no significant difference (p > 0.05) between the F3 and reference drug in terms of MDT and T50% with p

University involvement in sustainability initiatives

DEFF Research Database (Denmark)

Lehmann, Martin; Christensen, Per; Thrane, Mikkel

2007-01-01

With an outset in the case of Aalborg University, the linkages (actual, potential and missing) between academic work in research & education and sustainability initiatives are explored. The focus is both on the university's core activities as a provider of research and education and on the univer......With an outset in the case of Aalborg University, the linkages (actual, potential and missing) between academic work in research & education and sustainability initiatives are explored. The focus is both on the university's core activities as a provider of research and education...... and on the university's activities as an organisation, i.e. its own operation and its accounting for this. Sustainability is defined as a continuous process requiring balance between (the emergence of) problems and our ability and capability to solve them. Some core questions that this paper seeks to answer are: "How...... is Sustainable Development understood at executive level at the university? How (if at all) is sustainable development integrated in the core activities of the university? How is the university attached to ‘real life outside the ivory tower', e.g. through the establishing of Public-Private-Academic Partnerships...

Navigating Sustainability Embeddedness in Management Decision-Making

Directory of Open Access Journals (Sweden)

Catherine Le Roux

2016-05-01

Full Text Available Sustainability is an essential theme for business. In order to compete, strategies need to be improvised and efficient and effective decisions need to be made for improved sustainability performance. Despite management’s apparent knowledge of this, it appears that challenges persist with sustainability’s embeddedness in decision-making and its implementation in practice. In this study we propose a metaphor applying an integrative view of sustainability as support for management. We offer six antecedents of sustainability embeddedness in decision-making that contribute to building and confirming theory, and also provide a better understanding of current practice around sustainability embeddedness so that strategies can be developed for improved sustainability performance. Employees on all management levels in a stock exchange listed company provided rich empirical data for the study. Through the analysis of data in a case study, antecedents were inductively identified, conceptualized, and presented as using descriptive labels, namely: A True North Destination—a vision of sustainability embeddedness; Mountains—three obstacles; Fog—confusion and complexity; Myopia—shortsightedness; Navigation Necessities—requirements for the journey; and finally, the Chosen Team—selected stakeholders. Sustainability embeddedness was found to be dependent on leadership, the strategy message and structures, performance measures, and policies that support a unified culture for sustainability embeddedness.

Letter to the editor: naltrexone sustained-release/bupropion sustained-release for the management of obesity: review of the data to date

Directory of Open Access Journals (Sweden)

Buehler AM

2015-01-01

Full Text Available Anna M Buehler Hospital Alemao Oswaldo Cruz, Institute of Health Education and Sciences, Sao Paulo, BrazilI read with great interest the systematic review by Caixàs et al1 on the effect of naltrexone sustained-release/bupropion sustained-release (NB for the management of obesity. By comprehensively appraising five recent clinical trials, the authors concluded that the naltrexone/bupropion combination might represent an important new therapeutic option for the management of obesity, with a weight reduction effect that is similar to other drugs approved for the treatment of obesity.View original paper by Caixàs and colleagues.

A Sustainability Education Academic Development Framework (SEAD)

Science.gov (United States)

Holdsworth, Sarah; Thomas, Ian

2016-01-01

Academic development is one means of reorientating education within higher education (HE) to include sustainability principles. This paper identifies the requirements of academic development programmes that will provide educators with the skills to engage students in the ideas of sustainability and sustainable development. In order to determine…

Nanodiamonds as novel nanomaterials for biomedical applications: drug delivery and imaging systems

Directory of Open Access Journals (Sweden)

Kaur R

2013-01-01

Full Text Available Randeep Kaur, Ildiko BadeaDrug Design and Discovery Research Group, College of Pharmacy and Nutrition, University of Saskatchewan, Saskatoon, Saskatchewan, CanadaAbstract: Detonation nanodiamonds (NDs are emerging as delivery vehicles for small chemical drugs and macromolecular biotechnology products due to their primary particle size of 4 to 5 nm, stable inert core, reactive surface, and ability to form hydrogels. Nanoprobe technology capitalizes on the intrinsic fluorescence, high refractive index, and unique Raman signal of the NDs, rendering them attractive for in vitro and in vivo imaging applications. This review provides a brief introduction of the various types of NDs and describes the development of procedures that have led to stable single-digit-sized ND dispersions, a crucial feature for drug delivery systems and nanoprobes. Various approaches used for functionalizing the surface of NDs are highlighted, along with a discussion of their biocompatibility status. The utilization of NDs to provide sustained release and improve the dispersion of hydrophobic molecules, of which chemotherapeutic drugs are the most investigated, is described. The prospects of improving the intracellular delivery of nucleic acids by using NDs as a platform are exemplified. The photoluminescent and optical scattering properties of NDs, together with their applications in cellular labeling, are also reviewed. Considering the progress that has been made in understanding the properties of NDs, they can be envisioned as highly efficient drug delivery and imaging biomaterials for use in animals and humans.Keywords: dispersion, surface functionalization, toxicity, carriers, fluorescence, light scattering

Repurposing metformin: an old drug with new tricks in its binding pockets

Science.gov (United States)

Pryor, Rosina; Cabreiro, Filipe

2015-01-01

Improvements in healthcare and nutrition have generated remarkable increases in life expectancy worldwide. This is one of the greatest achievements of the modern world yet it also presents a grave challenge: as more people survive into later life, more also experience the diseases of old age, including type 2 diabetes (T2D), cardiovascular disease (CVD) and cancer. Developing new ways to improve health in the elderly is therefore a top priority for biomedical research. Although our understanding of the molecular basis of these morbidities has advanced rapidly, effective novel treatments are still lacking. Alternative drug development strategies are now being explored, such as the repurposing of existing drugs used to treat other diseases. This can save a considerable amount of time and money since the pharmacokinetics, pharmacodynamics and safety profiles of these drugs are already established, effectively enabling preclinical studies to be bypassed. Metformin is one such drug currently being investigated for novel applications. The present review provides a thorough and detailed account of our current understanding of the molecular pharmacology and signalling mechanisms underlying biguanide–protein interactions. It also focuses on the key role of the microbiota in regulating age-associated morbidities and a potential role for metformin to modulate its function. Research in this area holds the key to solving many of the mysteries of our current understanding of drug action and concerted effects to provide sustained and long-life health. PMID:26475449

Drug-diagnostics co-development in oncology

Directory of Open Access Journals (Sweden)

Richard eSimon

2013-12-01

Full Text Available Developments in genomics are providing a biological basis for the heterogeneity of clinical course and response to treatment that have long been apparent to clinicians The ability to molecularly characterize of human diseases presents new opportunities to develop more effective treatments and new challenges for the design and analysis of clinical trials.In oncology, treatment of broad populations with regimens that benefit a minority of patients is less economically sustainable with expensive molecularly targeted therapeutics. The established molecular heterogeneity of human diseases requires the development of new paradigms for the design and analysis of randomized clinical trials as a reliable basis for predictive medicine. We review prospective designs for the development of new therapeutics and predictive biomarkers to inform their use. We cover designs for a wide range of settings. At one extreme is the development of a new drug with a single candidate biomarker and strong biological evidence that marker negative patients are unlikely to benefit from the new drug. At the other extreme are phase III clinical trials involving both genome-wide discovery of a predictive classifier and internal validation of that classifier. We have outlined a prediction based approach to the analysis of randomized clinical trials that both preserves the type I error and provides a reliable internally validated basis for predicting which patients are most likely or unlikely to benefit from a new regimen.

Urban policy engagement with social sustainability in metro Vancouver.

Science.gov (United States)

Holden, Meg

2012-01-01

This article presents an analysis of social sustainability in comparative theoretical context and as a challenge to the post-political interpretation of sustainability in policy practice at the urban and regional scales. Metro Vancouver provides a case study for improving our understanding of the meaning of social sustainability as a framework for social policy in that it is among the handful of cities around the world currently working to define and enact social sustainability in governance terms. Results of this participant research provide evidence that some cities are politically engaging alternative development pathways using the concept of social sustainability. For sustainable development to retain its promise as an alternative policy framework for cities, social sustainability must be at the forefront.

Human resources for health strategies adopted by providers in resource-limited settings to sustain long-term delivery of ART: a mixed-methods study from Uganda.

Science.gov (United States)

Zakumumpa, Henry; Taiwo, Modupe Oladunni; Muganzi, Alex; Ssengooba, Freddie

2016-10-19

Human resources for health (HRH) constraints are a major barrier to the sustainability of antiretroviral therapy (ART) scale-up programs in Sub-Saharan Africa. Many prior approaches to HRH constraints have taken a top-down trend of generalized global strategies and policy guidelines. The objective of the study was to examine the human resources for health strategies adopted by front-line providers in Uganda to sustain ART delivery beyond the initial ART scale-up phase between 2004 and 2009. A two-phase mixed-methods approach was adopted. In the first phase, a survey of a nationally representative sample of health facilities (n = 195) across Uganda was conducted. The second phase involved in-depth interviews (n = 36) with ART clinic managers and staff of 6 of the 195 health facilities purposively selected from the first study phase. Quantitative data was analysed based on descriptive statistics, and qualitative data was analysed by coding and thematic analysis. The identified strategies were categorized into five themes: (1) providing monetary and non-monetary incentives to health workers on busy ART clinic days; (2) workload reduction through spacing ART clinic appointments; (3) adopting training workshops in ART management as a motivation strategy for health workers; (4) adopting non-physician-centred staffing models; and (5) devising ART program leadership styles that enhanced health worker commitment. Facility-level strategies for responding to HRH constraints are feasible and can contribute to efforts to increase country ownership of HIV programs in resource-limited settings. Consideration of the human resources for health strategies identified in the study by ART program planners and managers could enhance the long-term sustainment of ART programs by providers in resource-limited settings.

Performance of sustainable investments : a comparison of sustainable and conventional mutual funds in emerging markets

OpenAIRE

Christensson, Lars Stefan Bjerke; Skagestad, Ole Jakob

2017-01-01

This thesis compares the performance and risk factor exposure of sustainable and conventional mutual funds in emerging markets from January 2012 to July 2017. We use the latest sustainability ratings provided by Morningstar to define sustainable funds, and apply CAPM, Fama-French and Carhart models to control for the market, size, book-to-market and momentum factors. Additionally, we add a dummy to compare the risk-adjusted returns of the funds, and examine if the difference is...

Chitosan and Its Derivatives for Application in Mucoadhesive Drug Delivery Systems

Directory of Open Access Journals (Sweden)

Twana Mohammed M. Ways

2018-03-01

Full Text Available Mucoadhesive drug delivery systems are desirable as they can increase the residence time of drugs at the site of absorption/action, provide sustained drug release and minimize the degradation of drugs in various body sites. Chitosan is a cationic polysaccharide that exhibits mucoadhesive properties and it has been widely used in the design of mucoadhesive dosage forms. However, its limited mucoadhesive strength and limited water-solubility at neutral and basic pHs are considered as two major drawbacks of its use. Chemical modification of chitosan has been exploited to tackle these two issues. In this review, we highlight the up-to-date studies involving the synthetic approaches and description of mucoadhesive properties of chitosan and chitosan derivatives. These derivatives include trimethyl chitosan, carboxymethyl chitosan, thiolated chitosan, chitosan-enzyme inhibitors, chitosan-ethylenediaminetetraacetic acid (chitosan-EDTA, half-acetylated chitosan, acrylated chitosan, glycol chitosan, chitosan-catechol, methyl pyrrolidinone-chitosan, cyclodextrin-chitosan and oleoyl-quaternised chitosan. We have particularly focused on the effect of chemical derivatization on the mucoadhesive properties of chitosan. Additionally, other important properties including water-solubility, stability, controlled release, permeation enhancing effect, and in vivo performance are also described.

Recent advances on smart TiO2 nanotube platforms for sustainable drug delivery applications

Directory of Open Access Journals (Sweden)

Wang Q

2016-12-01

Full Text Available Qun Wang,1,2,* Jian-Ying Huang,2,* Hua-Qiong Li,3,4 Allan Zi-Jian Zhao,4 Yi Wang,4 Ke-Qin Zhang,2,5 Hong-Tao Sun,1 Yue-Kun Lai,2,5 1College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou, 2National Engineering Laboratory for Modern Silk, College of Textile and Clothing Engineering, Soochow University, Suzhou, 3Institute of Biomaterials and Engineering, Wenzhou Medical University, 4Wenzhou Institute of Biomaterials and Engineering, Chinese Academy of Sciences, Wenzhou, 5Research Center of Cooperative Innovation for Functional Organic/Polymer Material Micro/Nanofabrication, Suzhou, People’s Republic of China *These authors contributed equally to this work Abstract: To address the limitations of traditional drug delivery, TiO2 nanotubes (TNTs are recognized as a promising material for localized drug delivery systems. With regard to the excellent biocompatibility and physicochemical properties, TNTs prepared by a facile electrochemical anodizing process have been used to fabricate new drug-releasing implants for localized drug delivery. This review discusses the development of TNTs applied in localized drug delivery systems, focusing on several approaches to control drug release, including the regulation of the dimensions of TNTs, modification of internal chemical characteristics, adjusting pore openings by biopolymer coatings, and employing polymeric micelles as drug nanocarriers. Furthermore, rational strategies on external conditions-triggered stimuli-responsive drug release for localized drug delivery systems are highlighted. Finally, the review concludes with the recent advances on TNTs for controlled drug delivery and corresponding prospects in the future. Keywords: TiO2 nanotubes, electrochemical anodization, modification, stimulated drug delivery, drug-releasing implant

Sustaining the wild equals sustaining the world.

Science.gov (United States)

Nelson, G

1994-01-01

Sustainable development and carrying capacity are concepts that denote meeting society's needs without compromising the survival of future generations. The United States and other industrialized countries are pursuing a self-destructive course when fueling their economies by consuming their capital and degrading and depleting their resource base. Maximum exploitation of all resources has been the guiding ethic without paying respect to the environmental consequences. A sustainable society is still possible if strong political leadership and an ecologically literate society with an environmental ethic evolves. In the 1990s the world's population is calculated to increase to 6.3 billion people, the population of the United States already exceeds its carrying capacity and neither of these population increases are sustainable in the long run. In 1916 the US had 98 million people, and in 1994 it had about 260 million and it is still growing. The consequences are already obvious: the National Park System had just 358,000 visitors in 1916, 33 million in 1950, 172 million in 1970, and over 270 million in 1993. Often economists are an impediment to a sustainable economy because they fail to factor in the accumulated environmental deficit or annual cost of environmental deterioration when measuring annual economic output. Fortunately, in the US a conservation ethic is beginning to develop that will eventually become a strong social, political, and economic force. For instance, Wisconsin has mandated environmental education in every school from kindergarten through 12th grade. Such a program will provide the moral and political support to move the country to a sustainable economy. Even losing nations have recovered from World War II, but there is no recovery from destroyed ecosystems.

Y-12 Site Sustainability Plan

Energy Technology Data Exchange (ETDEWEB)

Sherry, T D; Kohlhorst, D P; Little, S K

2011-12-01

The accomplishments to date and the long-range planning of the Y-12 Energy Management and Sustainability and Stewardship programs support the DOE and the National Nuclear Security Administration (NNSA) vision for a commitment to energy efficiency and sustainability and to achievement of the Guiding Principles. Specifically, the Y-12 vision is to support the Environment, Safety and Health Policy and the DOE Strategic Sustainability Performance Plan (SSPP) while promoting overall sustainability and reduction of greenhouse gas (GHG) emissions. Table ES.2 gives a comprehensive overview of Y-12's performance status and planned actions. B&W Y-12's Energy Management mission is to incorporate renewable energy and energy efficient technologies site-wide and to position Y-12 to meet NNSA energy requirement needs through 2025 and beyond. During FY 2011, the site formed a sustainability team (Fig. ES.1). The sustainability team provides a coordinated approach to meeting the various sustainability requirements and serves as a forum for increased communication and consistent implementation of sustainability activities at Y-12. The sustainability team serves as an information exchange mechanism to promote general awareness of sustainability information, while providing a system to document progress and to identify resources. These resources are necessary to implement activities that support the overall goals of sustainability, including reducing the use of resources and conserving energy. Additionally, the team's objectives include: (1) Foster a Y-12-wide philosophy to conserve resources; (2) Reduce the impacts of production operations in a cost-effective manner; (3) Increase materials recycling; (4) Use a minimum amount of energy and fuel; (5) Create a minimum of waste and pollution in achieving Y-12-strategic objectives; (6) Develop and implement techniques, technologies, process modifications, and programs that support sustainable acquisition; (7) Minimize the

High use of private providers for first healthcare seeking by drug-resistant tuberculosis patients: a cross-sectional study in Yangon, Myanmar.

Science.gov (United States)

Sidharta, Sucitro Dwijayana; Yin, Jason Dean-Chen; Yoong, Joanne Su-Yin; Khan, Mishal Sameer

2018-04-11

Drug resistance is a growing challenge to tuberculosis (TB) control worldwide, but particularly salient to countries such as Myanmar, where the health system is fragmented across the public and private sector. A recent systematic review has identified a critical lack of evidence for local policymaking, particularly in relation to drivers of drug-resistance that could be the target of preventative efforts. To address this gap from a health systems perspective, our study investigates the healthcare-seeking behavior and preferences of recently diagnosed patients with drug-resistant tuberculosis (DR-TB), focusing on the use of private versus public healthcare providers. The study was conducted in ten townships across Yangon with high DR-TB burden. Patients newly-diagnosed with DR-TB by GeneXpert were enrolled, and data on healthcare-seeking behavior and socio-economic characteristics were collected from patient records and interviews. A descriptive analysis of healthcare-seeking behavior was followed by the investigation of relationships between socio-economic factors and type of provider visited upon first feeling unwell, through univariate logistic regressions. Of 202 participants, only 8% reported first seeking care at public facilities, while 88% reported seeking care at private facilities upon first feeling unwell. Participants aged 25-34 (Odds Ratio = 0.33 [0.12-0.95]) and males (Odds Ratio = 0.39 [0.20-0.75]) were less likely to visit a private clinic or hospital than those aged 18-24 and females, respectively. In contrast, participants with higher income were more likely to utilize private providers. Prior to DR-TB diagnosis, 86% of participants took medications from private providers. After DR-TB diagnosis, only 7% of participants continued to take medications from private providers. In urban Myanmar, most patients shifted to being managed exclusively in the public sector after being formally diagnosed with DR-TB. However, since the vast majority of DR

Improving uptake and use of malaria rapid diagnostic tests in the context of artemisinin drug resistance containment in eastern Myanmar: an evaluation of incentive schemes among informal private healthcare providers.

Science.gov (United States)

Aung, Tin; White, Christopher; Montagu, Dominic; McFarland, Willi; Hlaing, Thaung; Khin, Hnin Su Su; San, Aung Kyaw; Briegleb, Christina; Chen, Ingrid; Sudhinaraset, May

2015-03-06

that training and quality supervision of informal private healthcare providers can result in improved demand for, and appropriate use of RDTs in drug resistance containment areas in eastern Myanmar. Future studies should assess the sustainability of such interventions and the scale and level of intensity required over time as public sector service provision expands.

Sustainable city policy. Economic, environmental, technological

Energy Technology Data Exchange (ETDEWEB)

Camagni, R.; Capello, R. [Politecnico di Milano, Milan (Italy). Economics Dept.; Nijkamp, P. [Dept. of Spatial Economics. Fac. of Economics and Econometrics. Vrije Univ., Amsterdam (Netherlands)

1995-12-31

While the reasons for advocating intensified environmental concerns at the urban level are more and more accepted and clear, the question how to overcome such concerns is still fraught with many difficulties. The aim of the present paper is to formulate some policy guidelines, based on economic principles, for a `sustainable city`; it is an ambitious aim, since a unique and operationally defined `recipe` is difficult to envisage. An urban policy for a sustainable city needs to take different (and contrasting) aspects and many conflicting interests into consideration, while many political, social and economic frictions need to be overcome. A description of various aspects and concepts concerning sustainability issues at the urban level is given in Section 2. Section 3 then provides some considerations on possible technological, economic and environmental urban policies, by creating a typo logy of policy tools associated with different causes of urban decline. Section 4 provides some new, and partly provocative, suggestions for specific urban sustainability policies; in particular it deals with the problem of urban sustainability indicators, measures, and critical threshold levels at which urban sustainability policies should be implemented. Some reflective remarks will conclude the paper. 3 figs., 4 tabs., 25 refs.

Sustainable city policy. Economic, environmental, technological

International Nuclear Information System (INIS)

Camagni, R.; Capello, R.

1995-01-01

While the reasons for advocating intensified environmental concerns at the urban level are more and more accepted and clear, the question how to overcome such concerns is still fraught with many difficulties. The aim of the present paper is to formulate some policy guidelines, based on economic principles, for a 'sustainable city'; it is an ambitious aim, since a unique and operationally defined 'recipe' is difficult to envisage. An urban policy for a sustainable city needs to take different (and contrasting) aspects and many conflicting interests into consideration, while many political, social and economic frictions need to be overcome. A description of various aspects and concepts concerning sustainability issues at the urban level is given in Section 2. Section 3 then provides some considerations on possible technological, economic and environmental urban policies, by creating a typo logy of policy tools associated with different causes of urban decline. Section 4 provides some new, and partly provocative, suggestions for specific urban sustainability policies; in particular it deals with the problem of urban sustainability indicators, measures, and critical threshold levels at which urban sustainability policies should be implemented. Some reflective remarks will conclude the paper. 3 figs., 4 tabs., 25 refs

Sustainability.

Science.gov (United States)

Chang, Chein-Chi; DiGiovanni, Kimberly; Mei, Ying; Wei, Li

2016-10-01

This review on Sustainability covers selected 2015 publications on the focus of Sustainability. It is divided into the following sections : • Sustainable water and wastewater utilities • Sustainable water resources management • Stormwater and green infrastructure • Sustainability in wastewater treatment • Life cycle assessment (LCA) applications • Sustainability and energy in wastewater industry, • Sustainability and asset management.

Hydroxyapatite-alginate nanocomposite as drug delivery matrix for sustained release of ciprofloxacin.

Science.gov (United States)

Venkatasubbu, G Devanand; Ramasamy, S; Ramakrishnan, V; Kumar, J

2011-12-01

Hydroxyapatite is a bioceramic which has a wide range of medical application for bone diseases. To enhance its usage, we have prepared ciprofloxacin loaded nano hydroxyapatite (HA) composite with a natural polymer, alginate, using wet chemical method at low temperature. The prepared composites were analyzed by various physicochemical methods. The results show that the nano HA crystallites are well intact with the alginate macromolecules. For the composite system FT-IR and micro Raman results are reported in this paper. Studies on the drug loading and drug release have been done. The drug is pre-adsorbed onto the ceramic particle before the formation of composite. The thermal behavior of composite has been studied using thermo gravimetric analysis (TGA). This work, reports that the nanocomposite prepared under optimum condition could prolong the release of ciprofloxacin compared with the ciprofloxacin loaded hydroxyapatite.

The Global Sustainability Index: An Instrument For Assessing The Progress Towards The Sustainable Organization

Science.gov (United States)

Grecu, Valentin

2015-09-01

There is rarely an optimal solution in sustainable development but most frequently a need to build compromises between conflicting aspects such as economic, social and environmental ones and different expectations of stakeholders. Moreover, information is rarely available and precise. This paper will focus on how to use indicators to monitor sustainable development, integrating the information provided by many of them into a complex general sustainability index. Having this general indicator is essential for decision makers as it is very complicated to evaluate the performance of the organization based on multiple indicators. The objective of this paper is to find mathematical algorithms for simplifying the decision-making process by offering an instrument for the evaluation of the sustainability progress.

Amphiphilic block copolymers for drug delivery.

Science.gov (United States)

Adams, Monica L; Lavasanifar, Afsaneh; Kwon, Glen S

2003-07-01

Amphiphilic block copolymers (ABCs) have been used extensively in pharmaceutical applications ranging from sustained-release technologies to gene delivery. The utility of ABCs for delivery of therapeutic agents results from their unique chemical composition, which is characterized by a hydrophilic block that is chemically tethered to a hydrophobic block. In aqueous solution, polymeric micelles are formed via the association of ABCs into nanoscopic core/shell structures at or above the critical micelle concentration. Upon micellization, the hydrophobic core regions serve as reservoirs for hydrophobic drugs, which may be loaded by chemical, physical, or electrostatic means, depending on the specific functionalities of the core-forming block and the solubilizate. Although the Pluronics, composed of poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide), are the most widely studied ABC system, copolymers containing poly(L-amino acid) and poly(ester) hydrophobic blocks have also shown great promise in delivery applications. Because each ABC has unique advantages with respect to drug delivery, it may be possible to choose appropriate block copolymers for specific purposes, such as prolonging circulation time, introduction of targeting moieties, and modification of the drug-release profile. ABCs have been used for numerous pharmaceutical applications including drug solubilization/stabilization, alteration of the pharmacokinetic profile of encapsulated substances, and suppression of multidrug resistance. The purpose of this minireview is to provide a concise, yet detailed, introduction to the use of ABCs and polymeric micelles as delivery agents as well as to highlight current and past work in this area. Copyright 2003 Wiley-Liss, Inc. and the American Pharmacists Association

Influence of Hydrothermal Treatment on Physicochemical Properties and Drug Release of Anti-Inflammatory Drugs of Intercalated Layered Double Hydroxide Nanoparticles

Directory of Open Access Journals (Sweden)

Zi Gu

2014-05-01

Full Text Available The synthesis method of layered double hydroxides (LDHs determines nanoparticles’ performance in biomedical applications. In this study, hydrothermal treatment as an important synthesis technique has been examined for its influence on the physicochemical properties and the drug release rate from drug-containing LDHs. We synthesised MgAl–LDHs intercalated with non-steroidal anti-inflammatory drugs (i.e., naproxen, diclofenac and ibuprofen using a co-precipitation method with or without hydrothermal treatment (150 °C, 4 h. After being hydrothermally treated, LDH–drug crystallites increased in particle size and crystallinity, but did not change in the interlayer anion orientation, gallery height and chemical composition. The drug release patterns of all studied LDH–drug hybrids were biphasic and sustained. LDHs loaded with diclofenac had a quicker drug release rate compared with those with naproxen and ibuprofen, and the drug release from the hydrothermally-treated LDH–drug was slower than the freshly precipitated LDH–drug. These results suggest that the drug release of LDH–drugs is influenced by the crystallite size of LDHs, which can be controlled by hydrothermal treatment, as well as by the drug molecular physicochemical properties.

Drug treatment of elderly : The need for changing behaviour among providers and patients

OpenAIRE

Ulfvarson, Johanna

2004-01-01

Medication-related illness is a great problem, particularly among the elderly. Elderly people use many different drugs, they have many diseases and symptoms, and also experience natural signs of aging. Altogether, the treatment of an elderly patient is complex and assessment of the appropriateness of a drug therapy is difficult. In order to make a treatment as effective as possible and to achieve the best possible health it is important that the care personnel can identify p...

Transport, environment and sustainability

DEFF Research Database (Denmark)

Joumard, Robert; Gudmundsson, Henrik; Kehagia, Fotini

2010-01-01

This report is the final report of the action COST 356 'EST - Towards the definition of a measurable environmentally sustainable transport'. It tries to answer the following questions: How can environmental impacts of transport be measured? How can measurements be transformed into operational...... indicators? How can several indicators be jointly considered? And how can indicators be used in planning and decision making? Firstly we provide definition of 'indicator of environmental sustainability in transport'. The functions, strengths and weaknesses of indicators as measurement tools, and as decision...... support tools are discussed. We define what "environmental sustainability in transport" may mean through the transport system, the concepts of sustainable development and of environment. The concept of 'chain of causality' between a source and a final target is developed, as a common reference...

Drug induced rhabdomyolysis

Science.gov (United States)

Hohenegger, Martin

2012-01-01

Rhabdomyolysis is a clinical condition of potential life threatening destruction of skeletal muscle caused by diverse mechanisms including drugs and toxins. Given the fact that structurally not related compounds cause an identical phenotype pinpoints to common targets or pathways, responsible for executing rhabdomyolysis. A drop in myoplasmic ATP paralleled with sustained elevations in cytosolic Ca2+ concentration represents a common signature of rhabdomyolysis. Interestingly, cardiac tissue is hardly affected or only secondary, as a consequence of imbalance in electrolytes or acid–base equilibrium. This dogma is now impaired by compounds, which show up with combined toxicity in heart and skeletal muscle. In this review, cases of rhabdomyolysis with novel recently approved drugs will be explored for new target mechanisms in the light of previously described pathomechanisms. PMID:22560920

Sustainability performance evaluation: Literature review and future directions.

Science.gov (United States)

Büyüközkan, Gülçin; Karabulut, Yağmur

2018-07-01

Current global economic activities are increasingly being perceived as unsustainable. Despite the high number of publications, sustainability science remains highly dispersed over diverse approaches and topics. This article aims to provide a structured overview of sustainability performance evaluation related publications and to document the current state of literature, categorize publications, analyze and link trends, as well as highlight gaps and provide research recommendations. 128 articles between 2007 and 2018 are identified. The results suggest that sustainability performance evaluation models shall be more balanced, suitable criteria and their interrelations shall be well defined and subjectivity of qualitative criteria inherent to sustainability indicators shall be considered. To address this subjectivity, group decision-making techniques and other analytical methods that can deal with uncertainty, conflicting indicators, and linguistic evaluations can be used in future works. By presenting research gaps, this review stimulates researchers to establish practically applicable sustainability performance evaluation frameworks to help assess and compare the degree of sustainability, leading to more sustainable business practices. The review is unique in defining corporate sustainability performance evaluation for the first time, exploring the gap between sustainability accounting and sustainability assessment, and coming up with a structured overview of innovative research recommendations about integrating analytical assessment methods into conceptual sustainability frameworks. Copyright © 2018 Elsevier Ltd. All rights reserved.

Drugs and development: the global impact of drug use and trafficking on social and economic development.

Science.gov (United States)

Singer, Merrill

2008-12-01

Locating development efforts within the context of globalism and global drug capitalism, this article examines the significant health and social impact both legal and illegal drugs have on international development efforts. The paper takes on an issue that is generally overlooked in the development debate and is not much addressed in the current international development standard, the Millennium Development Goals, and yet is one that places serious constraints on the ability of underdeveloped nations to achieve improvement. The relationship between psychotropic or "mind/mood altering" drugs and sustainable development is rooted in the contribution that the legal and illegal drug trade makes to a set of barriers to development, including: (1) interpersonal crime and community violence; (2) the corruption of public servants and the disintegration of social institutions; (3) the emergence of new or enhanced health problems; (4) the lowering of worker productivity; (5) the ensnarement of youth in drug distribution and away from productive education or employment; (6) the skewing of economies to drug production and money laundering. The paper emphasizes the need for new approaches for diminishing the burden placed by drugs on development.

Water Quality and Sustainable Environmental Health

Science.gov (United States)

Setegn, S. G.

2014-12-01

Lack of adequate safe water, the pollution of the aquatic environment and the mismanagement of resources are major causes of ill-health and mortality, particularly in the developing countries. In order to accommodate more growth, sustainable fresh water resource management will need to be included in future development plans. One of the major environmental issues of concern to policy-makers is the increased vulnerability of ground water quality. The main challenge for the sustainability of water resources is the control of water pollution. To understand the sustainability of the water resources, one needs to understand the impact of future land use and climate changes on the natural resources. Providing safe water and basic sanitation to meet the Millennium Development Goals will require substantial economic resources, sustainable technological solutions and courageous political will. A balanced approach to water resources exploitation for development, on the one hand, and controls for the protection of health, on the other, is required if the benefits of both are to be realized without avoidable detrimental effects manifesting themselves. Meeting the millennium development goals for water and sanitation in the next decade will require substantial economic resources, sustainable technological solutions and courageous political will. In addition to providing "improved" water and "basic" sanitation services, we must ensure that these services provide: safe drinking water, adequate quantities of water for health, hygiene, agriculture and development and sustainable sanitation approaches to protect health and the environment.

Segmented polyurethane intravaginal rings for the sustained combined delivery of antiretroviral agents dapivirine and tenofovir.

Science.gov (United States)

Johnson, Todd J; Gupta, Kavita M; Fabian, Judit; Albright, Theodore H; Kiser, Patrick F

2010-02-19

Dual segment polyurethane intravaginal rings (IVRs) were fabricated to enable sustained release of antiretroviral agents dapivirine and tenofovir to prevent the male to female sexual transmission of the human immunodeficiency virus. Due to the contrasting hydrophilicity of the two drugs, dapivirine and tenofovir were separately formulated into polymers with matching hydrophilicity via solvent casting and hot melt extrusion. The resultant drug loaded rods were then joined together to form dual segment IVRs. Compression testing of the IVRs revealed that they are mechanically comparable to the widely accepted NuvaRing IVR. Physical characterization of the individual IVR segments using wide angle X-ray scattering and differential scanning calorimetry determined that dapivirine and tenofovir are amorphous and crystalline within their polymeric segments, respectively. In vitro release of tenofovir from the dual segment IVR was sustained over 30 days while dapivirine exhibited linear release over the time period. A 90 day accelerated stability study confirmed that dapivirine and tenofovir are stable in the IVR formulation. Altogether, these results suggest that multisegment polyurethane IVRs are an attractive formulation for the sustained vaginal delivery of drugs with contrasting hydrophilicity such as dapivirine and tenofovir. 2009 Elsevier B.V. All rights reserved.