Provenance management in Swift with implementation details.

Energy Technology Data Exchange (ETDEWEB)

Gadelha, L. M. R; Clifford, B.; Mattoso, M.; Wilde, M.; Foster, I. (Mathematics and Computer Science); ( CLS-CI); (Federal Univ. of Rio de Janeiro); (National Lab. for Scientific Computing, Brazil); (Univ. of Chicago)

2011-04-01

The Swift parallel scripting language allows for the specification, execution and analysis of large-scale computations in parallel and distributed environments. It incorporates a data model for recording and querying provenance information. In this article we describe these capabilities and evaluate interoperability with other systems through the use of the Open Provenance Model. We describe Swift's provenance data model and compare it to the Open Provenance Model. We also describe and evaluate activities performed within the Third Provenance Challenge, which consisted of implementing a specific scientific workflow, capturing and recording provenance information of its execution, performing provenance queries, and exchanging provenance information with other systems. Finally, we propose improvements to both the Open Provenance Model and Swift's provenance system.

SEIS-PROV: Practical Provenance for Seismological Data

Science.gov (United States)

Krischer, L.; Smith, J. A.; Tromp, J.

2015-12-01

It is widely recognized that reproducibility is crucial to advance science, but at the same time it is very hard to actually achieve. This results in it being recognized but also mostly ignored by a large fraction of the community. A key ingredient towards full reproducibility is to capture and describe the history of data, an issue known as provenance. We present SEIS-PROV, a practical format and data model to store provenance information for seismological data. In a seismological context, provenance can be seen as information about the processes that generated and modified a particular piece of data. For synthetic waveforms the provenance information describes which solver and settings therein were used to generate it. When looking at processed seismograms, the provenance conveys information about the different time series analysis steps that led to it. Additional uses include the description of derived data types, such as cross-correlations and adjoint sources, enabling their proper storage and exchange. SEIS-PROV is based on W3C PROV (http://www.w3.org/TR/prov-overview/), a standard for generic provenance information. It then applies an additional set of constraints to make it suitable for seismology. We present a definition of the SEIS-PROV format, a way to check if any given file is a valid SEIS-PROV document, and two sample implementations: One in SPECFEM3D GLOBE (https://geodynamics.org/cig/software/specfem3d_globe/) to store the provenance information of synthetic seismograms and another one as part of the ObsPy (http://obspy.org) framework enabling automatic tracking of provenance information during a series of analysis and transformation stages. This, along with tools to visualize and interpret provenance graphs, offers a description of data history that can be readily tracked, stored, and exchanged.

Provenance tracking for scientific software toolchains through on-demand release and archiving

Science.gov (United States)

Ham, David

2017-04-01

There is an emerging consensus that published computational science results must be backed by a provenance chain tying results to the exact versions of input data and the code which generated them. There is also now an impressive range of web services devoted to revision control of software, and the archiving in citeable form of both software and input data. However, much scientific software itself builds on libraries and toolkits, and these themselves have dependencies. Further, it is common for cutting edge research to depend on the latest version of software in online repositories, rather than the official release version. This creates a situation in which an author who wishes to follow best practice in recording the provenance chain of their results must archive and cite unreleased versions of a series of dependencies. Here, we present an alternative which toolkit authors can easily implement to provide a semi-automatic mechanism for creating and archiving custom software releases of the precise version of a package used in a particular simulation. This approach leverages the excellent services provided by GitHub and Zenodo to generate a connected set of citeable DOIs for the archived software. We present the integration of this workflow into the Firedrake automated finite element framework as a practical example of this approach in use on a complex geoscientific tool chain in practical use.

Marine mammal tracks from two-hydrophone acoustic recordings made with a glider

Science.gov (United States)

Küsel, Elizabeth T.; Munoz, Tessa; Siderius, Martin; Mellinger, David K.; Heimlich, Sara

2017-04-01

A multinational oceanographic and acoustic sea experiment was carried out in the summer of 2014 off the western coast of the island of Sardinia, Mediterranean Sea. During this experiment, an underwater glider fitted with two hydrophones was evaluated as a potential tool for marine mammal population density estimation studies. An acoustic recording system was also tested, comprising an inexpensive, off-the-shelf digital recorder installed inside the glider. Detection and classification of sounds produced by whales and dolphins, and sometimes tracking and localization, are inherent components of population density estimation from passive acoustics recordings. In this work we discuss the equipment used as well as analysis of the data obtained, including detection and estimation of bearing angles. A human analyst identified the presence of sperm whale (Physeter macrocephalus) regular clicks as well as dolphin clicks and whistles. Cross-correlating clicks recorded on both data channels allowed for the estimation of the direction (bearing) of clicks, and realization of animal tracks. Insights from this bearing tracking analysis can aid in population density estimation studies by providing further information (bearings), which can improve estimates.

De-identification of psychiatric intake records: Overview of 2016 CEGS N-GRID shared tasks Track 1.

Science.gov (United States)

Stubbs, Amber; Filannino, Michele; Uzuner, Özlem

2017-11-01

The 2016 CEGS N-GRID shared tasks for clinical records contained three tracks. Track 1 focused on de-identification of a new corpus of 1000 psychiatric intake records. This track tackled de-identification in two sub-tracks: Track 1.A was a "sight unseen" task, where nine teams ran existing de-identification systems, without any modifications or training, on 600 new records in order to gauge how well systems generalize to new data. The best-performing system for this track scored an F1 of 0.799. Track 1.B was a traditional Natural Language Processing (NLP) shared task on de-identification, where 15 teams had two months to train their systems on the new data, then test it on an unannotated test set. The best-performing system from this track scored an F1 of 0.914. The scores for Track 1.A show that unmodified existing systems do not generalize well to new data without the benefit of training data. The scores for Track 1.B are slightly lower than the 2014 de-identification shared task (which was almost identical to 2016 Track 1.B), indicating that these new psychiatric records pose a more difficult challenge to NLP systems. Overall, de-identification is still not a solved problem, though it is important to the future of clinical NLP. Copyright © 2017 Elsevier Inc. All rights reserved.

How the provenance of electronic health record data matters for research: a case example using system mapping.

Science.gov (United States)

Johnson, Karin E; Kamineni, Aruna; Fuller, Sharon; Olmstead, Danielle; Wernli, Karen J

2014-01-01

The use of electronic health records (EHRs) for research is proceeding rapidly, driven by computational power, analytical techniques, and policy. However, EHR-based research is limited by the complexity of EHR data and a lack of understanding about data provenance, meaning the context under which the data were collected. This paper presents system flow mapping as a method to help researchers more fully understand the provenance of their EHR data as it relates to local workflow. We provide two specific examples of how this method can improve data identification, documentation, and processing. EHRs store clinical and administrative data, often in unstructured fields. Each clinical system has a unique and dynamic workflow, as well as an EHR customized for local use. The EHR customization may be influenced by a broader context such as documentation required for billing. We present a case study with two examples of using system flow mapping to characterize EHR data for a local colorectal cancer screening process. System flow mapping demonstrated that information entered into the EHR during clinical practice required interpretation and transformation before it could be accurately applied to research. We illustrate how system flow mapping shaped our knowledge of the quality and completeness of data in two examples: (1) determining colonoscopy indication as recorded in the EHR, and (2) discovering a specific EHR form that captured family history. Researchers who do not consider data provenance risk compiling data that are systematically incomplete or incorrect. For example, researchers who are not familiar with the clinical workflow under which data were entered might miss or misunderstand patient information or procedure and diagnostic codes. Data provenance is a fundamental characteristic of research data from EHRs. Given the diversity of EHR platforms and system workflows, researchers need tools for evaluating and reporting data availability, quality, and

PAV ontology: provenance, authoring and versioning.

Science.gov (United States)

Ciccarese, Paolo; Soiland-Reyes, Stian; Belhajjame, Khalid; Gray, Alasdair Jg; Goble, Carole; Clark, Tim

2013-11-22

Provenance is a critical ingredient for establishing trust of published scientific content. This is true whether we are considering a data set, a computational workflow, a peer-reviewed publication or a simple scientific claim with supportive evidence. Existing vocabularies such as Dublin Core Terms (DC Terms) and the W3C Provenance Ontology (PROV-O) are domain-independent and general-purpose and they allow and encourage for extensions to cover more specific needs. In particular, to track authoring and versioning information of web resources, PROV-O provides a basic methodology but not any specific classes and properties for identifying or distinguishing between the various roles assumed by agents manipulating digital artifacts, such as author, contributor and curator. We present the Provenance, Authoring and Versioning ontology (PAV, namespace http://purl.org/pav/): a lightweight ontology for capturing "just enough" descriptions essential for tracking the provenance, authoring and versioning of web resources. We argue that such descriptions are essential for digital scientific content. PAV distinguishes between contributors, authors and curators of content and creators of representations in addition to the provenance of originating resources that have been accessed, transformed and consumed. We explore five projects (and communities) that have adopted PAV illustrating their usage through concrete examples. Moreover, we present mappings that show how PAV extends the W3C PROV-O ontology to support broader interoperability. The initial design of the PAV ontology was driven by requirements from the AlzSWAN project with further requirements incorporated later from other projects detailed in this paper. The authors strived to keep PAV lightweight and compact by including only those terms that have demonstrated to be pragmatically useful in existing applications, and by recommending terms from existing ontologies when plausible. We analyze and compare PAV with related

Data Provenance and Trust

Directory of Open Access Journals (Sweden)

Stratis D Viglas

2013-07-01

Full Text Available The Oxford Dictionary defines provenance as “the place of origin, or earliest known history of something.” The term, when transferred to its digital counterpart, has morphed into a more general meaning. It is not only used to refer to the origin of a digital artefact but also to its changes over time. By changes in this context we may not only refer to its digital snapshots but also to the processes that caused and materialised the change. As an example, consider a database record r created at point in time t0; an update u to that record at time t1 causes it to have a value r’. In terms of provenance, we do not only want to record the snapshots (t0, r and (t1, r’ but also the transformation u that when applied to (t0, r results in (t1, r’, that is u(t0, r = (t1, r’.

Archives and societal provenance Australian essays

CERN Document Server

Piggott, Michael

2012-01-01

Records and archival arrangements in Australia are globally relevant because Australia's indigenous people represent the oldest living culture in the world, and because modern Australia is an ex-colonial society now heavily multicultural in outlook. Archives and Societal Provenance explores this distinctiveness using the theoretical concept of societal provenance as propounded by Canadian archival scholars led by Dr Tom Nesmith. The book's seventeen essays blend new writing and re-workings of earlier work, comprising the fi rst text to apply a societal provenance perspective to a national sett

78 FR 37775 - Privacy Act Systems of Records; Phytosanitary Certificate Issuance and Tracking System

Science.gov (United States)

2013-06-24

... DEPARTMENT OF AGRICULTURE Office of the Secretary [Docket No. APHIS-2012-0104] Privacy Act Systems of Records; Phytosanitary Certificate Issuance and Tracking System AGENCY: Animal and Plant Health... Health Inspection Service proposes to add a system of records to its inventory of records systems subject...

Privacy Act System of Records: Confidential Business Information Tracking System, EPA-20

Science.gov (United States)

Learn about the Confidential Business Information Tracking System, including who is covered in the system, the purpose of data collection, routine uses for the system's records, and other security procedures.

Characterization of aerosols containing fissionable elements using solid-state track recorders

International Nuclear Information System (INIS)

Roberts, J.H.; Kafalenos, V.P.; Yule, T.J.

1976-01-01

An aerosol of U 3 O 3 highly enriched in 235 U was generated with a nebulizer from a suspension of U 3 O 8 powder in distilled water. The aerosol was collected on a membrane filter. Polycarbonate plastic, placed in good contact with the filter, was used to record fission tracks when the package was exposed to known fluences of slow neutrons. Fission-track stars associated with individual particles of U 3 O 8 were observed in the plastic. The fission-track distributions were converted to a particle size distribution for the aerosol. For a log normal distribution the geometric mean and standard deviation can be determined with better than 5% accuracy. This method can be applied to plutonium and other transuranic aerosols. (orig.) [de

Holographic recording of cosmic ray tracks in BEBC

International Nuclear Information System (INIS)

Bjelkhagen, H.; Pouyat, F.; Seidl, W.; Harigel, G.; Baltay, C.; Bregman, M.; Hibbs, M.; Schaffer, A.; Cence, R.; Brucker, E.B.; Hart, T.J.

1984-01-01

We report on a successful test of holography in the Big European Bubble Chamber (BEBC) at CERN, which was filled with a heavy neon-hydrogen mixture. During the test of a modified in-line scheme we photographed bubble tracks longer than 1 m, which were produced by cosmic rays. The smallest bubbles, which were recorded with excellent contrast, had a diameter of > or approx. 120 μm. This presents an improved resolution of a factor of five compared to photos taken with conventional cameras. (orig.)

Electronic health record case studies to advance environmental public health tracking.

Science.gov (United States)

Namulanda, Gonza; Qualters, Judith; Vaidyanathan, Ambarish; Roberts, Eric; Richardson, Max; Fraser, Alicia; McVeigh, Katharine H; Patterson, Scott

2018-03-01

Data from traditional public health surveillance systems can have some limitations, e.g., timeliness, geographic level, and amount of data accessible. Electronic health records (EHRs) could present an opportunity to supplement current sources of routinely collected surveillance data. The National Environmental Public Health Tracking Program (Tracking Program) sought to explore the use of EHRs for advancing environmental public health surveillance practices. The Tracking Program funded four state/local health departments to obtain and pilot the use of EHR data to address several issues including the challenges and technical requirements for accessing EHR data, and the core data elements required to integrate EHR data within their departments' Tracking Programs. The results of these pilot projects highlighted the potential of EHR data for public health surveillance of rare diseases that may lack comprehensive registries, and surveillance of prevalent health conditions or risk factors for health outcomes at a finer geographic level. EHRs therefore, may have potential to supplement traditional sources of public health surveillance data. Published by Elsevier Inc.

Towards an Ontology-Driven Blockchain Design for Supply Chain Provenance

OpenAIRE

Kim, Henry M.; Laskowski, Marek

2016-01-01

An interesting research problem in our age of Big Data is that of determining provenance. Granular evaluation of provenance of physical goods--e.g. tracking ingredients of a pharmaceutical or demonstrating authenticity of luxury goods--has often not been possible with today's items that are produced and transported in complex, inter-organizational, often internationally-spanning supply chains. Recent adoption of Internet of Things and Blockchain technologies give promise at better supply chai...

ASDF: An Adaptable Seismic Data Format with Full Provenance

Science.gov (United States)

Smith, J. A.; Krischer, L.; Tromp, J.; Lefebvre, M. P.

2015-12-01

In order for seismologists to maximize their knowledge of how the Earth works, they must extract the maximum amount of useful information from all recorded seismic data available for their research. This requires assimilating large sets of waveform data, keeping track of vast amounts of metadata, using validated standards for quality control, and automating the workflow in a careful and efficient manner. In addition, there is a growing gap between CPU/GPU speeds and disk access speeds that leads to an I/O bottleneck in seismic workflows. This is made even worse by existing seismic data formats that were not designed for performance and are limited to a few fixed headers for storing metadata.The Adaptable Seismic Data Format (ASDF) is a new data format for seismology that solves the problems with existing seismic data formats and integrates full provenance into the definition. ASDF is a self-describing format that features parallel I/O using the parallel HDF5 library. This makes it a great choice for use on HPC clusters. The format integrates the standards QuakeML for seismic sources and StationXML for receivers. ASDF is suitable for storing earthquake data sets, where all waveforms for a single earthquake are stored in a one file, ambient noise cross-correlations, and adjoint sources. The format comes with a user-friendly Python reader and writer that gives seismologists access to a full set of Python tools for seismology. There is also a faster C/Fortran library for integrating ASDF into performance-focused numerical wave solvers, such as SPECFEM3D_GLOBE. Finally, a GUI tool designed for visually exploring the format exists that provides a flexible interface for both research and educational applications. ASDF is a new seismic data format that offers seismologists high-performance parallel processing, organized and validated contents, and full provenance tracking for automated seismological workflows.

Data Provenance for Agent-Based Models in a Distributed Memory

Directory of Open Access Journals (Sweden)

Delmar B. Davis

2018-04-01

Full Text Available Agent-Based Models (ABMs assist with studying emergent collective behavior of individual entities in social, biological, economic, network, and physical systems. Data provenance can support ABM by explaining individual agent behavior. However, there is no provenance support for ABMs in a distributed setting. The Multi-Agent Spatial Simulation (MASS library provides a framework for simulating ABMs at fine granularity, where agents and spatial data are shared application resources in a distributed memory. We introduce a novel approach to capture ABM provenance in a distributed memory, called ProvMASS. We evaluate our technique with traditional data provenance queries and performance measures. Our results indicate that a configurable approach can capture provenance that explains coordination of distributed shared resources, simulation logic, and agent behavior while limiting performance overhead. We also show the ability to support practical analyses (e.g., agent tracking and storage requirements for different capture configurations.

Progress along developmental tracks for electronic health records implementation in the United States

Directory of Open Access Journals (Sweden)

Hollar David W

2009-03-01

Full Text Available Abstract The development and implementation of electronic health records (EHR have occurred slowly in the United States. To date, these approaches have, for the most part, followed four developmental tracks: (a Enhancement of immunization registries and linkage with other health records to produce Child Health Profiles (CHP, (b Regional Health Information Organization (RHIO demonstration projects to link together patient medical records, (c Insurance company projects linked to ICD-9 codes and patient records for cost-benefit assessments, and (d Consortia of EHR developers collaborating to model systems requirements and standards for data linkage. Until recently, these separate efforts have been conducted in the very silos that they had intended to eliminate, and there is still considerable debate concerning health professionals access to as well as commitment to using EHR if these systems are provided. This paper will describe these four developmental tracks, patient rights and the legal environment for EHR, international comparisons, and future projections for EHR expansion across health networks in the United States.

The Symbiotic Relationship between Scientific Workflow and Provenance (Invited)

Science.gov (United States)

Stephan, E.

2010-12-01

The purpose of this presentation is to describe the symbiotic nature of scientific workflows and provenance. We will also discuss the current trends and real world challenges facing these two distinct research areas. Although motivated differently, the needs of the international science communities are the glue that binds this relationship together. Understanding and articulating the science drivers to these communities is paramount as these technologies evolve and mature. Originally conceived for managing business processes, workflows are now becoming invaluable assets in both computational and experimental sciences. These reconfigurable, automated systems provide essential technology to perform complex analyses by coupling together geographically distributed disparate data sources and applications. As a result, workflows are capable of higher throughput in a shorter amount of time than performing the steps manually. Today many different workflow products exist; these could include Kepler and Taverna or similar products like MeDICI, developed at PNNL, that are standardized on the Business Process Execution Language (BPEL). Provenance, originating from the French term Provenir “to come from”, is used to describe the curation process of artwork as art is passed from owner to owner. The concept of provenance was adopted by digital libraries as a means to track the lineage of documents while standards such as the DublinCore began to emerge. In recent years the systems science community has increasingly expressed the need to expand the concept of provenance to formally articulate the history of scientific data. Communities such as the International Provenance and Annotation Workshop (IPAW) have formalized a provenance data model. The Open Provenance Model, and the W3C is hosting a provenance incubator group featuring the Proof Markup Language. Although both workflows and provenance have risen from different communities and operate independently, their mutual

Automated Generation of Technical Documentation and Provenance for Reproducible Research

Science.gov (United States)

Jolly, B.; Medyckyj-Scott, D.; Spiekermann, R.; Ausseil, A. G.

2017-12-01

Data provenance and detailed technical documentation are essential components of high-quality reproducible research, however are often only partially addressed during a research project. Recording and maintaining this information during the course of a project can be a difficult task to get right as it is a time consuming and often boring process for the researchers involved. As a result, provenance records and technical documentation provided alongside research results can be incomplete or may not be completely consistent with the actual processes followed. While providing access to the data and code used by the original researchers goes some way toward enabling reproducibility, this does not count as, or replace, data provenance. Additionally, this can be a poor substitute for good technical documentation and is often more difficult for a third-party to understand - particularly if they do not understand the programming language(s) used. We present and discuss a tool built from the ground up for the production of well-documented and reproducible spatial datasets that are created by applying a series of classification rules to a number of input layers. The internal model of the classification rules required by the tool to process the input data is exploited to also produce technical documentation and provenance records with minimal additional user input. Available provenance records that accompany input datasets are incorporated into those that describe the current process. As a result, each time a new iteration of the analysis is performed the documentation and provenance records are re-generated to provide an accurate description of the exact process followed. The generic nature of this tool, and the lessons learned during its creation, have wider application to other fields where the production of derivative datasets must be done in an open, defensible, and reproducible way.

Tracking Single Units in Chronic, Large Scale, Neural Recordings for Brain Machine Interface Applications

Directory of Open Access Journals (Sweden)

Ahmed eEleryan

2014-07-01

Full Text Available In the study of population coding in neurobiological systems, tracking unit identity may be critical to assess possible changes in the coding properties of neuronal constituents over prolonged periods of time. Ensuring unit stability is even more critical for reliable neural decoding of motor variables in intra-cortically controlled brain-machine interfaces (BMIs. Variability in intrinsic spike patterns, tuning characteristics, and single-unit identity over chronic use is a major challenge to maintaining this stability, requiring frequent daily calibration of neural decoders in BMI sessions by an experienced human operator. Here, we report on a unit-stability tracking algorithm that efficiently and autonomously identifies putative single-units that are stable across many sessions using a relatively short duration recording interval at the start of each session. The algorithm first builds a database of features extracted from units' average spike waveforms and firing patterns across many days of recording. It then uses these features to decide whether spike occurrences on the same channel on one day belong to the same unit recorded on another day or not. We assessed the overall performance of the algorithm for different choices of features and classifiers trained using human expert judgment, and quantified it as a function of accuracy and execution time. Overall, we found a trade-off between accuracy and execution time with increasing data volumes from chronically implanted rhesus macaques, with an average of 12 seconds processing time per channel at ~90% classification accuracy. Furthermore, 77% of the resulting putative single-units matched those tracked by human experts. These results demonstrate that over the span of a few months of recordings, automated unit tracking can be performed with high accuracy and used to streamline the calibration phase during BMI sessions.

What Are We Tracking ... and Why?

Science.gov (United States)

Suarez-Sola, I.; Davey, A.; Hourcle, J. A.

2008-12-01

What Are We Tracking ... and Why? It is impossible to define what adequate provenance is without knowing who is asking the question. What determines sufficient provenance information is not a function of the data, but of the question being asked of it. Many of these questions are asked by people not affiliated with the mission and possibly from different disciplines. To plan for every conceivable question would require a significant burden on the data systems that are designed to answer the mission's science objectives. Provenance is further complicated as each system might have a different definition of 'data set'. Is it the raw instrument results? Is it the result of numerical processing? Does it include the associated metadata? Does it include packaging? Depending on how a system defines 'data set', it may not be able to track provenance with sufficient granularity to ask the desired question, or we may end up with a complex web of relationships that significantly increases the system complexity. System designers must also remember that data archives are not a closed system. We need mechanisms for tracking not only the provenance relationships between data objects and the systems that generate them, but also from journal articles back to the data that was used to support the research. Simply creating a mirror of the data used, as done in other scientific disciplines, is unrealistic for terabyte and petabyte scale data sets. We present work by the Virtual Solar Observatory on the assignment of identifiers that could be used for tracking provenance and compare it to other proposed standards in the scientific and library science communities. We use the Solar Dynamics Observatory, STEREO and Hinode missions as examples where the concept of 'data set' breaks many systems for citing data.

Data Provenance and Data Management in eScience

CERN Document Server

Bai, Quan; Giugni, Stephen; Williamson, Darrell; Taylor, John

2013-01-01

eScience allows scientific research to be carried out in highly distributed environments. The complex nature of the interactions in an eScience infrastructure, which often involves a range of instruments, data, models, applications, people and computational facilities, suggests there is a need for data provenance and data management (DPDM). The W3C Provenance Working Group defines the provenance of a resource as a “record that describes entities and processes involved in producing and delivering or otherwise influencing that resource”. It has been widely recognised that provenance is a critical issue to enable sharing, trust, authentication and reproducibility of eScience process.   Data Provenance and Data Management in eScience identifies the gaps between DPDM foundations and their practice within eScience domains including clinical trials, bioinformatics and radio astronomy. The book covers important aspects of fundamental research in DPDM including provenance representation and querying. It also expl...

Symptom severity prediction from neuropsychiatric clinical records: Overview of 2016 CEGS N-GRID shared tasks Track 2.

Science.gov (United States)

Filannino, Michele; Stubbs, Amber; Uzuner, Özlem

2017-11-01

The second track of the CEGS N-GRID 2016 natural language processing shared tasks focused on predicting symptom severity from neuropsychiatric clinical records. For the first time, initial psychiatric evaluation records have been collected, de-identified, annotated and shared with the scientific community. One-hundred-ten researchers organized in twenty-four teams participated in this track and submitted sixty-five system runs for evaluation. The top ten teams each achieved an inverse normalized macro-averaged mean absolute error score over 0.80. The top performing system employed an ensemble of six different machine learning-based classifiers to achieve a score 0.86. The task resulted to be generally easy with the exception of two specific classes of records: records with very few but crucial positive valence signals, and records describing patients predominantly affected by negative rather than positive valence. Those cases proved to be very challenging for most of the systems. Further research is required to consider the task solved. Overall, the results of this track demonstrate the effectiveness of data-driven approaches to the task of symptom severity classification. Copyright © 2017 Elsevier Inc. All rights reserved.

Progress in the application of solid-state track recorders to reactor physics experiments

International Nuclear Information System (INIS)

Besant, C.B.; Ipson, S.S.

1969-03-01

Heavily ionising particles passing through insulating materials cause tracks due to damage. These strain energy fields may be observed directly with an electron microscope or, after etching, the tracks may be seen with an optical microscope. The etching solution penetrates the damaged portion of the material and enlarges the hole if the etching is continued. This technique has been applied to detecting fission fragments from fissions taking place in a thin source of fissile material. The source, together with the insulating material is called a Solid-State Track Recorder and has been applied to the measurement of fission ratios in the fast critical assembly ZEBRA at Winfrith. The main disadvantage of the technique has been in counting tracks by eye which is laborious and subject to the human element. This has been overcome by counting tracks with a 'Quantimet' Computer Image Analyser. Absolute fission rate measurements are also discussed and it has been shown that measurements to an accuracy of better than ± 1% should be possible with this technique. (author)

Imaging of fast-neutron sources using solid-state track-recorder pinhole radiography

International Nuclear Information System (INIS)

Ruddy, F.H.; Gold, R.; Roberts, J.H.; Kaiser, B.J.; Preston, C.C.

1983-08-01

Pinhole imaging methods are being developed and tested for potential future use in imaging the intense neutron source of the Fusion Materials Irradiation Test (FMIT) Facility. Previously reported, extensive calibration measurements of the proton, neutron, and alpha particle response characteristics of CR-39 polymer solid state track recorders (SSTRs) are being used to interpret the results of imaging experiments using both charged particle and neutron pinhole collimators. High resolution, neutron pinhole images of a 252 Cf source have been obtained in the form of neutron induced proton recoil tracks in CR-39 polymer SSTR. These imaging experiments are described as well as their potential future applications to FMIT

Barriers to retrieving patient information from electronic health record data: failure analysis from the TREC Medical Records Track.

Science.gov (United States)

Edinger, Tracy; Cohen, Aaron M; Bedrick, Steven; Ambert, Kyle; Hersh, William

2012-01-01

Secondary use of electronic health record (EHR) data relies on the ability to retrieve accurate and complete information about desired patient populations. The Text Retrieval Conference (TREC) 2011 Medical Records Track was a challenge evaluation allowing comparison of systems and algorithms to retrieve patients eligible for clinical studies from a corpus of de-identified medical records, grouped by patient visit. Participants retrieved cohorts of patients relevant to 35 different clinical topics, and visits were judged for relevance to each topic. This study identified the most common barriers to identifying specific clinic populations in the test collection. Using the runs from track participants and judged visits, we analyzed the five non-relevant visits most often retrieved and the five relevant visits most often overlooked. Categories were developed iteratively to group the reasons for incorrect retrieval for each of the 35 topics. Reasons fell into nine categories for non-relevant visits and five categories for relevant visits. Non-relevant visits were most often retrieved because they contained a non-relevant reference to the topic terms. Relevant visits were most often infrequently retrieved because they used a synonym for a topic term. This failure analysis provides insight into areas for future improvement in EHR-based retrieval with techniques such as more widespread and complete use of standardized terminology in retrieval and data entry systems.

Provenance-Based Debugging and Drill-Down in Data-Oriented Workflows

KAUST Repository

Ikeda, Robert

2012-04-01

Panda (for Provenance and Data) is a system that supports the creation and execution of data-oriented workflows, with automatic provenance generation and built-in provenance tracing operations. Workflows in Panda are arbitrary a cyclic graphs containing both relational (SQL) processing nodes and opaque processing nodes programmed in Python. For both types of nodes, Panda generates logical provenance - provenance information stored at the processing-node level - and uses the generated provenance to support record-level backward tracing and forward tracing operations. In our demonstration we use Panda to integrate, process, and analyze actual education data from multiple sources. We specifically demonstrate how Panda\\'s provenance generation and tracing capabilities can be very useful for workflow debugging, and for drilling down on specific results of interest. © 2012 IEEE.

Inter-track interference mitigation with two-dimensional variable equalizer for bit patterned media recording

Directory of Open Access Journals (Sweden)

Yao Wang

2017-05-01

Full Text Available The increased track density in bit patterned media recording (BPMR causes increased inter-track interference (ITI, which degrades the bit error rate (BER performance. In order to mitigate the effect of the ITI, signals from multiple tracks can be equalized by a 2D equalizer with 1D target. Usually, the 2D fixed equalizer coefficients are obtained by using a pseudo-random bit sequence (PRBS for training. In this study, a 2D variable equalizer is proposed, where various sets of 2D equalizer coefficients are predetermined and stored for different ITI patterns besides the usual PRBS training. For data detection, as the ITI patterns are unknown in the first global iteration, the main and adjacent tracks are equalized with the conventional 2D fixed equalizer, detected with Bahl-Cocke-Jelinek-Raviv (BCJR detector and decoded with low-density parity-check (LDPC decoder. Then using the estimated bit information from main and adjacent tracks, the ITI pattern for each island of the main track can be estimated and the corresponding 2D variable equalizers are used to better equalize the bits on the main track. This process is executed iteratively by feeding back the main track information. Simulation results indicate that for both single-track and two-track detection, the proposed 2D variable equalizer can achieve better BER and frame error rate (FER compared to that with the 2D fixed equalizer.

Active Provenance in Data-intensive Research

Science.gov (United States)

Spinuso, Alessandro; Mihajlovski, Andrej; Filgueira, Rosa; Atkinson, Malcolm

2017-04-01

Scientific communities are building platforms where the usage of data-intensive workflows is crucial to conduct their research campaigns. However managing and effectively support the understanding of the 'live' processes, fostering computational steering, sharing and re-use of data and methods, present several bottlenecks. These are often caused by the poor level of documentation on the methods and the data and how users interact with it. This work wants to explore how in such systems, flexibility in the management of the provenance and its adaptation to the different users and application contexts can lead to new opportunities for its exploitation, improving productivity. In particular, this work illustrates a conceptual and technical framework enabling tunable and actionable provenance in data-intensive workflow systems in support of reproducible science. It introduces the concept of Agile data-intensive systems to define the characteristic of our target platform. It shows a novel approach to the integration of provenance mechanisms, offering flexibility in the scale and in the precision of the provenance data collected, ensuring its relevance to the domain of the data-intensive task, fostering its rapid exploitation. The contributions address aspects of the scale of the provenance records, their usability and active role in the research life-cycle. We will discuss the use of dynamically generated provenance types as the approach for the integration of provenance mechanisms into a data-intensive workflow system. Enabling provenance can be transparent to the workflow user and developer, as well as fully controllable and customisable, depending from their expertise and the application's reproducibility, monitoring and validation requirements. The API that allows the realisation and adoption of a provenance type is presented, especially for what concerns the support of provenance profiling, contextualisation and precision. An actionable approach to provenance

Solid State Track Recorder fission rate measurements at high neutron fluence and high temperature

International Nuclear Information System (INIS)

Ruddy, F.H.; Roberts, J.H.; Gold, R.

1985-01-01

Solid State Track Recorder (SSTR) techniques have been used to measure 239-Pu, 235-U, and 237-Np fission rates for total neutron fluences approaching 5 x 10 17 n/cm 2 at temperatures in the range 680 to 830 0 F. Natural quartz crystal SSTRs were used to withstand the high temperature environment and ultra low-mass fissionable deposits of the three isotopes were required to yield scannable track densities at the high neutron fluences. The results of these high temperature, high neutron fluence measurements are reported

78 FR 54445 - Privacy Act Systems of Records; Phytosanitary Certificate Issuance and Tracking System

Science.gov (United States)

2013-09-04

... INFORMATION CONTACT: Mr. Christian B. Dellis, Export Services, Plant Health Programs, Plant Protection and... DEPARTMENT OF AGRICULTURE Office of the Secretary [Docket No. APHIS-2012-0104] Privacy Act Systems of Records; Phytosanitary Certificate Issuance and Tracking System AGENCY: Animal and Plant Health...

Diverging Drought Resistance of Scots Pine Provenances Revealed by Infrared Thermography

Directory of Open Access Journals (Sweden)

Hannes Seidel

2016-08-01

Full Text Available With recent climate changes, Scots pine (Pinus sylvestris L. forests have been affected by die-off events. Assisted migration of adapted provenances mitigates drought impacts and promotes forest regeneration. Although suitable provenances are difficult to identify by traditional ecophysiological techniques, which are time consuming and invasive, plant water status can be easily assessed by infrared thermography. Thus, we examined the stress responses of 2-year-old potted Scots pine seedlings from six provenances (Bulgaria, France, Germany, Italy, Poland, and Spain based on two thermal indices (crop water stress index and stomatal conductance index. Both indices were derived from infrared images during a six-week drought/control treatment in a greenhouse in the summer of 2013. The pines were monitored during the stress and subsequent recovery period. After controlling for fluctuating environmental conditions, soil moisture or treatment-specific water supply was the most important driver of drought stress. The stress magnitude and response to soil water deficit depended on provenance. Under moderate drought conditions, pines from western and eastern Mediterranean provenances (Bulgaria, France, and Spain expressed lower stress levels than those from both continental provenances (Germany and Poland. In pines from the Spanish and Bulgarian provenances, the stress level differences were significantly lower than in continental pines. Moreover, pines from continental provenances were less resilient (showed less recovery after the stress period than Mediterranean pines. Under extreme drought, all provenances were equally stressed with almost no significant differences in their thermal indices. Provenance-specific differences in drought resistance, which are associated with factors such as summer precipitation at the origin of Scots pine seedlings, may offer promising tracks of adaptation to future drought risks.

Detrital Zircon Provenance Record of Pre-Andean to Modern Tectonics in the Northern Andes: Examples from Peru, Ecuador, and Colombia

Science.gov (United States)

George, S. W. M.; Jackson, L. J.; Horton, B. K.

2015-12-01

Detrital zircon U-Pb age distributions from modern rivers and Mesozoic-Cenozoic basin fill in the northern Andes provide insights into pre-Andean, Andean, and active uplift and exhumation of distinctive sediment source regions. Diagnostic age signatures enable straightforward discrimination of competing sediment sources within the Andean magmatic arc (Western Cordillera-Central Cordillera), retroarc fold-thrust belt (Eastern Cordillera-Subandean Zone), and Amazonian craton (composed of several basement provinces). More complex, however, are the mid/late Cenozoic provenance records generated by recycling of basin fill originally deposited during early/mid Mesozoic extension, late Mesozoic thermal subsidence, and early Cenozoic shortening. Although subject to time-transgressive trends, regionally significant provenance patterns in Peru, Ecuador, and Colombia reveal: (1) Triassic-Jurassic growth of extensional subbasins fed by local block uplifts (with commonly unimodal 300­-150 Ma age peaks); (2) Cretaceous deposition in an extensive postrift setting fed by principally cratonic sources (with common 1800-900 Ma ages); and (3) Cenozoic growth of a broad flexural basin fed initially fed by magmatic-arc rocks (100-0 Ma), then later dominance by thrust-belt sedimentary rocks with progressively greater degrees of basin recycling (yielding diverse and variable age populations from the aforementioned source regions). U-Pb results from modern rivers and smaller subbasins prove useful in evaluating source-to-sink relationships, downstream mixing relationships, hinterland-foreland basin connectivity, paleodrainage integration, and tectonic/paleotopographic reconstructions. Most but not all of the elevated intermontane basins in the modern hinterland of the northern Andes contain provenance records consistent with genesis in a broader foreland basin developed at low elevation. Downstream variations within modern axial rivers and Cenozoic axial basins inform predictive models of

Accomplishments and Compromises in Prediction Research for World Records and Best Performances in Track and Field and Swimming

Science.gov (United States)

Liu, Yuanlong; Paul, Stanley; Fu, Frank H.

2012-01-01

The conductors of this study reviewed prediction research and studied the accomplishments and compromises in predicting world records and best performances in track and field and swimming. The results of the study showed that prediction research only promises to describe the historical trends in track and field and swimming performances, to study…

Aggregation by Provenance Types: A Technique for Summarising Provenance Graphs

Directory of Open Access Journals (Sweden)

Luc Moreau

2015-04-01

Full Text Available As users become confronted with a deluge of provenance data, dedicated techniques are required to make sense of this kind of information. We present Aggregation by Provenance Types, a provenance graph analysis that is capable of generating provenance graph summaries. It proceeds by converting provenance paths up to some length k to attributes, referred to as provenance types, and by grouping nodes that have the same provenance types. The summary also includes numeric values representing the frequency of nodes and edges in the original graph. A quantitative evaluation and a complexity analysis show that this technique is tractable; with small values of k, it can produce useful summaries and can help detect outliers. We illustrate how the generated summaries can further be used for conformance checking and visualization.

LabelFlow Framework for Annotating Workflow Provenance

Directory of Open Access Journals (Sweden)

Pinar Alper

2018-02-01

Full Text Available Scientists routinely analyse and share data for others to use. Successful data (reuse relies on having metadata describing the context of analysis of data. In many disciplines the creation of contextual metadata is referred to as reporting. One method of implementing analyses is with workflows. A stand-out feature of workflows is their ability to record provenance from executions. Provenance is useful when analyses are executed with changing parameters (changing contexts and results need to be traced to respective parameters. In this paper we investigate whether provenance can be exploited to support reporting. Specifically; we outline a case-study based on a real-world workflow and set of reporting queries. We observe that provenance, as collected from workflow executions, is of limited use for reporting, as it supports queries partially. We identify that this is due to the generic nature of provenance, its lack of domain-specific contextual metadata. We observe that the required information is available in implicit form, embedded in data. We describe LabelFlow, a framework comprised of four Labelling Operators for decorating provenance with domain-specific Labels. LabelFlow can be instantiated for a domain by plugging it with domain-specific metadata extractors. We provide a tool that takes as input a workflow, and produces as output a Labelling Pipeline for that workflow, comprised of Labelling Operators. We revisit the case-study and show how Labels provide a more complete implementation of reporting queries.

Sediment provenance in contractional orogens: The detrital zircon record from modern rivers in the Andean fold-thrust belt and foreland basin of western Argentina

Science.gov (United States)

Capaldi, Tomas N.; Horton, Brian K.; McKenzie, N. Ryan; Stockli, Daniel F.; Odlum, Margaret L.

2017-12-01

This study analyzes detrital zircon U-Pb age populations from Andean rivers to assess whether active synorogenic sedimentation accurately records proportional contributions from varied bedrock source units across different drainage areas. Samples of modern river sand were collected from west-central Argentina (28-33°S), where the Andes are characterized by active uplift and deposition in diverse contractional provinces, including (1) hinterland, (2) wedge-top, (3) proximal foreland, and (4) distal broken foreland basin settings. Potential controls on sediment provenance were evaluated by comparing river U-Pb age distributions with predicted age spectra generated by a sediment mixing model weighted by relative catchment exposure (outcrop) areas for different source units. Several statistical measures (similarity, likeness, and cross-correlation) are employed to compare how well the area-weighted model predicts modern river age populations. (1) Hinterland basin provenance is influenced by local relief generated along thrust-bounded ranges and high zircon fertility of exposed crystalline basement. (2) Wedge-top (piggyback) basin provenance is controlled by variable lithologic durability among thrust-belt bedrock sources and recycled basin sediments. (3) Proximal foreland (foredeep) basin provenance of rivers and fluvial megafans accurately reflect regional bedrock distributions, with limited effects of zircon fertility and lithologic durability in large (>20,000 km2) second-order drainage systems. (4) In distal broken segments of the foreland basin, regional provenance signatures from thrust-belt and hinterland areas are diluted by local contributions from foreland basement-cored uplifts.

ProvenCare perinatal: a model for delivering evidence/ guideline-based care for perinatal populations.

Science.gov (United States)

Berry, Scott A; Laam, Leslie A; Wary, Andrea A; Mateer, Harry O; Cassagnol, Hans P; McKinley, Karen E; Nolan, Ruth A

2011-05-01

Geisinger Health System (GHS) has applied its ProvenCare model to demonstrate that a large integrated health care delivery system, enabled by an electronic health record (EHR), could reengineer a complicated clinical process, reduce unwarranted variation, and provide evidence-based care for patients with a specified clinical condition. In 2007 GHS began to apply the model to a more complicated, longer-term condition of "wellness"--perinatal care. ADAPTING PROVENCARE TO PERINATAL CARE: The ProvenCare Perinatal initiative was more complex than the five previous ProvenCare endeavors in terms of breadth, scope, and duration. Each of the 22 sites created a process flow map to depict the current, real-time process at each location. The local practice site providers-physicians and mid-level practitioners-reached consensus on 103 unique best practice measures (BPMs), which would be tracked for every patient. These maps were then used to create a single standardized pathway that included the BPMs but also preserved some unique care offerings that reflected the needs of the local context. A nine-phase methodology, expanded from the previous six-phase model, was implemented on schedule. Pre- to postimplementation improvement occurred for all seven BPMs or BPM bundles that were considered the most clinically relevant, with five statistically significant. In addition, the rate of primary cesarean sections decreased by 32%, and birth trauma remained unchanged as the number of vaginal births increased. Preliminary experience suggests that integrating evidence/guideline-based best practices into work flows in inpatient and outpatient settings can achieve improvements in daily patient care processes and outcomes.

Using Blockchain and smart contracts for secure data provenance management

OpenAIRE

Ramachandran, Aravind; Kantarcioglu, Dr. Murat

2017-01-01

Blockchain technology has evolved from being an immutable ledger of transactions for cryptocurrencies to a programmable interactive the environment for building distributed reliable applications. Although, blockchain technology has been used to address various challenges, to our knowledge none of the previous work focused on using blockchain to develop a secure and immutable scientific data provenance management framework that automatically verifies the provenance records. In this work, we le...

Solid-state track recorder neutron dosimetry in light water reactor pressure vessel surveillance mockups

International Nuclear Information System (INIS)

Ruddy, F.H.; Roberts, J.H.; Gold, R.; Preston, C.C.

1984-09-01

Solid-State Track Recorder (SSTR) measurements of neutron-induced fission rates have been made in several pressure vessel mockup facilities as part of the US Nuclear Regulatory Commission's (NRC) Light Water Reactor Pressure Vessel Surveillance Dosimetry Improvement Program (LWR-PV-SDIP). The results of extensive physics-dosimetry measurements made at the Pool Critical Assembly (PCA) at Oak Ridge National Laboratory (ORNL) in Oak Ridge, TN are summarized. Included are 235 U, 238 U, 237 Np and 232 Th fission rates in the PCA 12/13, 8/7, and 4/12 SSC configurations. Additional low power measurements have been made in an engineering mockup at the VENUS critical assembly at CEN-SCK, Mol, Belgium. 237 Np and 238 U fission rates were made at selected locations in the VENUS mockup, which models the in-core and near-core regions of a pressurized water reactor (PWR). Absolute core power measurements were made at VENUS by exposing solid-state track recorders (SSTRs) to polished fuel pellets within in-core fuel pins. 8 references, 4 figures, 10 tables

Flow-Based Provenance

Directory of Open Access Journals (Sweden)

Sabah Al-Fedaghi

2017-02-01

Full Text Available Aim/Purpose: With information almost effortlessly created and spontaneously available, current progress in Information and Communication Technology (ICT has led to the complication that information must be scrutinized for trustworthiness and provenance. Information systems must become provenance-aware to be satisfactory in accountability, reproducibility, and trustworthiness of data. Background:\tMultiple models for abstract representation of provenance have been proposed to describe entities, people, and activities involved in producing a piece of data, including the Open Provenance Model (OPM and the World Wide Web Consortium. These models lack certain concepts necessary for specifying workflows and encoding the provenance of data products used and generated. Methodology: Without loss of generality, the focus of this paper is on OPM depiction of provenance in terms of a directed graph. We have redrawn several case studies in the framework of our proposed model in order to compare and evaluate it against OPM for representing these cases. Contribution: This paper offers an alternative flow-based diagrammatic language that can form a foundation for modeling of provenance. The model described here provides an (abstract machine-like representation of provenance. Findings: The results suggest a viable alternative in the area of diagrammatic representation for provenance applications. Future Research: Future work will seek to achieve more accurate comparisons with current models in the field.

Characteristics of reverse overwrite process in shingled recording scheme at ultra-high track density

Energy Technology Data Exchange (ETDEWEB)

Li Shaoping, E-mail: shaoping_li_2000@yahoo.com [Western Digital Inc. 1250 Reliance Way, Fremont, CA 94539 (United States); Mendez, Hector; Terrill, Dave; Liu Feng; Bai, Daniel; Mao Sining [Western Digital Inc. 1250 Reliance Way, Fremont, CA 94539 (United States)

2012-02-15

A systematic experimental study of the reverse overwrite (ReOVW) process in the shingled recording scheme has been conducted in conjunction with characterization of corresponding recording performances from recording heads with different geometries. It was found that there is no ReOVW reduction as the track density increases in a strict shingled recording fashion. Nonetheless, ReOVW is indeed slightly decreased from 300 to 700 kpi in a so-called one write shingled recording process. Overall our obtained data suggest that conventional magnetic recording technology might be able to extend all the way beyond an areal density of one Tbit/in{sup 2} by using the shingled recording scheme. - Research Highlights: > This paper discusses the most advanced recording scheme, e.g., shingled recording process, for next generation magnetic data storage devices. > The paper shows that the write-ability of magnetic recording is sufficient in the shingled recording scheme even when the areal density is beyond 1.0 Tb/in{sup 2}. > Our results also shows that the writer's edge write-ability is essential for reducing noise during the write process in shingled recording scheme. > The paper also demonstrates that a multiple and sequential write process ensures the normal erasure-ability in shingled recording scheme. > Our results also indicate that the noise nature in the write process still could be attributed to the hard-easy transition and imprint effect.

Characteristics of reverse overwrite process in shingled recording scheme at ultra-high track density

International Nuclear Information System (INIS)

Li Shaoping; Mendez, Hector; Terrill, Dave; Liu Feng; Bai, Daniel; Mao Sining

2012-01-01

A systematic experimental study of the reverse overwrite (ReOVW) process in the shingled recording scheme has been conducted in conjunction with characterization of corresponding recording performances from recording heads with different geometries. It was found that there is no ReOVW reduction as the track density increases in a strict shingled recording fashion. Nonetheless, ReOVW is indeed slightly decreased from 300 to 700 kpi in a so-called one write shingled recording process. Overall our obtained data suggest that conventional magnetic recording technology might be able to extend all the way beyond an areal density of one Tbit/in 2 by using the shingled recording scheme. - Research highlights: → This paper discusses the most advanced recording scheme, e.g., shingled recording process, for next generation magnetic data storage devices. → The paper shows that the write-ability of magnetic recording is sufficient in the shingled recording scheme even when the areal density is beyond 1.0 Tb/in 2 . → Our results also shows that the writer's edge write-ability is essential for reducing noise during the write process in shingled recording scheme. → The paper also demonstrates that a multiple and sequential write process ensures the normal erasure-ability in shingled recording scheme. → Our results also indicate that the noise nature in the write process still could be attributed to the hard-easy transition and imprint effect.

Extending eScience Provenance with User-Submitted Semantic Annotations

Science.gov (United States)

Michaelis, J.; Zednik, S.; West, P.; Fox, P. A.; McGuinness, D. L.

2010-12-01

records the provenance of data products in the Proof Markup Language, provides a user/annotation classification ontology, and provides a browsing interface designed to allow users to inspect PML-based provenance at varying degrees of abstraction, as well as add and view multiple types of annotations. While developed with ACOS-based provenance in mind, domain independence is preserved in this software package, making it easily extensible to other eScience systems.

Automated metadata, provenance cataloging and navigable interfaces: Ensuring the usefulness of extreme-scale data

Energy Technology Data Exchange (ETDEWEB)

Schissel, D.P., E-mail: schissel@fusion.gat.com [General Atomics, P.O. Box 85608, San Diego, CA 92186-5608 (United States); Abla, G.; Flanagan, S.M. [General Atomics, P.O. Box 85608, San Diego, CA 92186-5608 (United States); Greenwald, M. [Massachusetts Institute of Technology, Cambridge, MA 02139 (United States); Lee, X. [General Atomics, P.O. Box 85608, San Diego, CA 92186-5608 (United States); Romosan, A.; Shoshani, A. [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Stillerman, J.; Wright, J. [Massachusetts Institute of Technology, Cambridge, MA 02139 (United States)

2014-05-15

For scientific research, it is not the mere existence of experimental or simulation data that is important, but the ability to make use of it. This paper presents the results of research to create a data model, infrastructure, and a set of tools that support data tracking, cataloging, and integration across a broad scientific domain. The system is intended to document workflow and data provenance in the widest sense. Combining research on integrated metadata, provenance, and ontology information with research on user interfaces has allowed the construction of early prototype. While using fusion science as a test bed, the system's framework and data model is quite general.

Automated metadata, provenance cataloging and navigable interfaces: Ensuring the usefulness of extreme-scale data

International Nuclear Information System (INIS)

Schissel, D.P.; Abla, G.; Flanagan, S.M.; Greenwald, M.; Lee, X.; Romosan, A.; Shoshani, A.; Stillerman, J.; Wright, J.

2014-01-01

For scientific research, it is not the mere existence of experimental or simulation data that is important, but the ability to make use of it. This paper presents the results of research to create a data model, infrastructure, and a set of tools that support data tracking, cataloging, and integration across a broad scientific domain. The system is intended to document workflow and data provenance in the widest sense. Combining research on integrated metadata, provenance, and ontology information with research on user interfaces has allowed the construction of early prototype. While using fusion science as a test bed, the system's framework and data model is quite general

Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB)

CERN Document Server

American Society for Testing and Materials. Philadelphia

2003-01-01

1.1 This test method describes the use of solid-state track recorders (SSTRs) for neutron dosimetry in light-water reactor (LWR) applications. These applications extend from low neutron fluence to high neutron fluence, including high power pressure vessel surveillance and test reactor irradiations as well as low power benchmark field measurement. (1) This test method replaces Method E 418. This test method is more detailed and special attention is given to the use of state-of-the-art manual and automated track counting methods to attain high absolute accuracies. In-situ dosimetry in actual high fluence-high temperature LWR applications is emphasized. 1.2 This test method includes SSTR analysis by both manual and automated methods. To attain a desired accuracy, the track scanning method selected places limits on the allowable track density. Typically good results are obtained in the range of 5 to 800 000 tracks/cm2 and accurate results at higher track densities have been demonstrated for some cases. (2) Trac...

Ice Velocity Variations of the Polar Record Glacier (East Antarctica Using a Rotation-Invariant Feature-Tracking Approach

Directory of Open Access Journals (Sweden)

Tingting Liu

2017-12-01

Full Text Available In this study, the ice velocity changes from 2004 to 2015 of the Polar Record Glacier (PRG in East Antarctica were investigated based on a feature-tracking method using Landsat-7 enhanced thematic mapper plus (ETM+ and Landsat-8 operational land imager (OLI images. The flow field of the PRG curves make it difficult to generate ice velocities in some areas using the traditional normalized cross-correlation (NCC-based feature-tracking method. Therefore, a rotation-invariant parameter from scale-invariant feature transform (SIFT is introduced to build a novel rotation-invariant feature-tracking approach. The validation was performed based on multi-source images and the making earth system data records for use in research environments (MEaSUREs interferometric synthetic aperture radar (InSAR-based Antarctica ice velocity map data set. The results indicate that the proposed method is able to measure the ice velocity in more areas and performs as well as the traditional NCC-based feature-tracking method. The sequential ice velocities obtained present the variations in the PRG during this period. Although the maximum ice velocity of the frontal margin of the PRG and the frontal iceberg reached about 900 m/a and 1000 m/a, respectively, the trend from 2004 to 2015 showed no significant change. Under the interaction of the Polar Times Glacier and the Polarforschung Glacier, both the direction and the displacement of the PRG were influenced. This impact also led to higher velocities in the western areas of the PRG than in the eastern areas. In addition, elevation changes and frontal iceberg calving also impacted the ice velocity of the PRG.

Chaotic system optimal tracking using data-based synchronous method with unknown dynamics and disturbances

International Nuclear Information System (INIS)

Song Ruizhuo; Wei Qinglai

2017-01-01

We develop an optimal tracking control method for chaotic system with unknown dynamics and disturbances. The method allows the optimal cost function and the corresponding tracking control to update synchronously. According to the tracking error and the reference dynamics, the augmented system is constructed. Then the optimal tracking control problem is defined. The policy iteration (PI) is introduced to solve the min-max optimization problem. The off-policy adaptive dynamic programming (ADP) algorithm is then proposed to find the solution of the tracking Hamilton–Jacobi–Isaacs (HJI) equation online only using measured data and without any knowledge about the system dynamics. Critic neural network (CNN), action neural network (ANN), and disturbance neural network (DNN) are used to approximate the cost function, control, and disturbance. The weights of these networks compose the augmented weight matrix, and the uniformly ultimately bounded (UUB) of which is proven. The convergence of the tracking error system is also proven. Two examples are given to show the effectiveness of the proposed synchronous solution method for the chaotic system tracking problem. (paper)

The Integrated Waste Tracking Systems (IWTS) - A Comprehensive Waste Management Tool

International Nuclear Information System (INIS)

Robert S. Anderson

2005-01-01

The US Department of Energy (DOE) Idaho National Laboratory (INL) site located near Idaho Falls, ID USA, has developed a comprehensive waste management and tracking tool that integrates multiple operational activities with characterization data from waste declaration through final waste disposition. The Integrated Waste Tracking System (IWTS) provides information necessary to help facility personnel properly manage their waste and demonstrate a wide range of legal and regulatory compliance. As a client?server database system, the IWTS is a proven tracking, characterization, compliance, and reporting tool that meets the needs of both operations and management while providing a high level of flexibility. This paper describes some of the history involved with the development and current use of IWTS as a comprehensive waste management tool as well as a discussion of IWTS deployments performed by the INL for outside clients. Waste management spans a wide range of activities including: work group interactions, regulatory compliance management, reporting, procedure management, and similar activities. The IWTS documents these activities and performs tasks in a computer-automated environment. Waste characterization data, container characterization data, shipments, waste processing, disposals, reporting, and limit compliance checks are just a few of the items that IWTS documents and performs to help waste management personnel perform their jobs. Throughout most hazardous and radioactive waste generating, storage and disposal sites, waste management is performed by many different groups of people in many facilities. Several organizations administer their areas of waste management using their own procedures and documentation independent of other organizations. Files are kept, some of which are treated as quality records, others not as stringent. Quality records maintain a history of: changes performed after approval, the reason for the change(s), and a record of whom and when

Solid state track recorder measurements in the poolside critical assembly

International Nuclear Information System (INIS)

Ruddy, F.H.; Gold, R.; Roberts, J.H.

1979-01-01

Fission rate measurements using solid state track recorders (SSTR) have been performed at the PCA. A schematic representation of a cross-section of the PCA is shown. Fission rates were measured in the pressure vessel simulator at the T/4, T/2 and 3T/4 positions and in the void box (VB). SSTR measurements were carried out with 232 Th, 235 U (bare and cadmium covered), 238 U and 237 Np fissionable deposits. Midplane only measurements were carried out for 235 U and 237 Np, while 5 axial locations at 1/4T and 1/2T and 3 axial locations at 3/4T and in the VB were sampled for 232 Th and 238 U. The HEDL SSTR fission rate measurements reported herein for both configurations together with NBS and CEN/SCK fission chamber measurements will be used to establish absolute and relative fission reaction rates, and ratios for the PCA pressure vessel Benchmark Facility

Empowering Provenance in Data Integration

Science.gov (United States)

Kondylakis, Haridimos; Doerr, Martin; Plexousakis, Dimitris

The provenance of data has recently been recognized as central to the trust one places in data. This paper presents a novel framework in order to empower provenance in a mediator based data integration system. We use a simple mapping language for mapping schema constructs, between an ontology and relational sources, capable to carry provenance information. This language extends the traditional data exchange setting by translating our mapping specifications into source-to-target tuple generating dependencies (s-t tgds). Then we define formally the provenance information we want to retrieve i.e. annotation, source and tuple provenance. We provide three algorithms to retrieve provenance information using information stored on the mappings and the sources. We show the feasibility of our solution and the advantages of our framework.

Logical provenance in data-oriented workflows?

KAUST Repository

Ikeda, R.

2013-04-01

We consider the problem of defining, generating, and tracing provenance in data-oriented workflows, in which input data sets are processed by a graph of transformations to produce output results. We first give a new general definition of provenance for general transformations, introducing the notions of correctness, precision, and minimality. We then determine when properties such as correctness and minimality carry over from the individual transformations\\' provenance to the workflow provenance. We describe a simple logical-provenance specification language consisting of attribute mappings and filters. We provide an algorithm for provenance tracing in workflows where logical provenance for each transformation is specified using our language. We consider logical provenance in the relational setting, observing that for a class of Select-Project-Join (SPJ) transformations, logical provenance specifications encode minimal provenance. We have built a prototype system supporting the features and algorithms presented in the paper, and we report a few preliminary experimental results. © 2013 IEEE.

Special Section: The third provenance challenge on using the open provenance model for interoperability

NARCIS (Netherlands)

Simmhan, Y; Groth, P.T.; Moreau, L

2011-01-01

The third provenance challenge was organized to evaluate the efficacy of the Open Provenance Model (OPM) in representing and sharing provenance with the goal of improving the specification. A data loading scientific workflow that ingests data files into a relational database for the Pan-STARRS sky

Sea Surface Temperature Records from the Along-Track Scanning Radiometers

Science.gov (United States)

Mutlow, C. T.; Smith, D. L.; Delderfield, J.; Llewellyn-Jones, D.

2006-12-01

Since the early 1990s ESA has flown Along Track Scanning Radiometer (ATSR) instruments on its ERS-1 and -2 satellites and is currently flying the Advanced ATSR instrument (AATSR) on its very successful Envisat mission; each successive sensor has been an incremental improvement over the last. The sensors have been specifically designed to provide the information urgently needed for the debate on climate change and global warming, as well as to produce properly calibrated image data sets for use in a wide range of EO studies. The ATSR instruments are a series of second generation space radiometers which build on the long heritage of the NOAA Advanced Very High Resolution Radiometers (AVHRR). Each ATSR exploits the multi-channel method pioneered in AVHRR but also uses new technology to improve instrument stability and calibration, detector signal to noise, and to provide observations of the same surface scene at two different angles. The novel feature of each ATSR, from which the sensor is derives its name, is its use of along-track scanning to reduce the effects of the atmosphere on surface measurements. This method obtains two observations of the scene through differing amounts of atmosphere; the "along track" view passes through a longer atmospheric path so is more affected by the atmosphere than the nadir view. ATSR-1 was launched on the ESA ERS-1 satellite on 17th July 1991, as the test-bed for the along track scanning concept using infrared channels at 1.6, 3.7, 10.8 and 12.0um. ATSR-1 continued to operate until the ERS-1 spacecraft was lost some 10 years after launch. The ATSR-2 and Advanced ATSR (AATSR) instruments are developments from the original ATSR-1, which in addition to the infrared channels; carry extra visible channels at 0.55, 0.67 and 0.87um for vegetation, cloud and aerosol remote sensing. ATSR-2 has operating on the ESA ERS-2 satellite since April 1995 and has provided over 10 years of data. The current operational sensor is AATSR flying on ESA

Computer-aided target tracking in motion analysis studies

Science.gov (United States)

Burdick, Dominic C.; Marcuse, M. L.; Mislan, J. D.

1990-08-01

Motion analysis studies require the precise tracking of reference objects in sequential scenes. In a typical situation, events of interest are captured at high frame rates using special cameras, and selected objects or targets are tracked on a frame by frame basis to provide necessary data for motion reconstruction. Tracking is usually done using manual methods which are slow and prone to error. A computer based image analysis system has been developed that performs tracking automatically. The objective of this work was to eliminate the bottleneck due to manual methods in high volume tracking applications such as the analysis of crash test films for the automotive industry. The system has proven to be successful in tracking standard fiducial targets and other objects in crash test scenes. Over 95 percent of target positions which could be located using manual methods can be tracked by the system, with a significant improvement in throughput over manual methods. Future work will focus on the tracking of clusters of targets and on tracking deformable objects such as airbags.

Tracking and Establishing Provenance of Earth Science Datasets: A NASA-Based Example

Science.gov (United States)

Ramapriyan, Hampapuram K.; Goldstein, Justin C.; Hua, Hook; Wolfe, Robert E.

2016-01-01

Information quality is of paramount importance to science. Accurate, scientifically vetted and statistically meaningful and, ideally, reproducible information engenders scientific trust and research opportunities. Not surprisingly, federal bodies (e.g., NASA, NOAA, USGS) have very strictly affirmed the importance of information quality in their product requirements. So-called Highly Influential Scientific Assessments (HISA) such as The Third US National Climate Assessment (NCA3) published in 2014 undergo a very rigorous review process to ensure transparency and credibility. To support the transparency of such reports, the U.S. Global Change Research Program (USGCRP) has developed the Global Change Information System (GCIS). A recent activity was performed to trace the provenance as completely as possible for all NCA3 figures that were predominantly based on NASA data. This poster presents the mechanics of that project and the lessons learned from that activity.

The Integrated Waste Tracking Systems (IWTS) - A Comprehensive Waste Management Tool

Energy Technology Data Exchange (ETDEWEB)

Robert S. Anderson

2005-09-01

The US Department of Energy (DOE) Idaho National Laboratory (INL) site located near Idaho Falls, ID USA, has developed a comprehensive waste management and tracking tool that integrates multiple operational activities with characterization data from waste declaration through final waste disposition. The Integrated Waste Tracking System (IWTS) provides information necessary to help facility personnel properly manage their waste and demonstrate a wide range of legal and regulatory compliance. As a client?server database system, the IWTS is a proven tracking, characterization, compliance, and reporting tool that meets the needs of both operations and management while providing a high level of flexibility. This paper describes some of the history involved with the development and current use of IWTS as a comprehensive waste management tool as well as a discussion of IWTS deployments performed by the INL for outside clients. Waste management spans a wide range of activities including: work group interactions, regulatory compliance management, reporting, procedure management, and similar activities. The IWTS documents these activities and performs tasks in a computer-automated environment. Waste characterization data, container characterization data, shipments, waste processing, disposals, reporting, and limit compliance checks are just a few of the items that IWTS documents and performs to help waste management personnel perform their jobs. Throughout most hazardous and radioactive waste generating, storage and disposal sites, waste management is performed by many different groups of people in many facilities. Several organizations administer their areas of waste management using their own procedures and documentation independent of other organizations. Files are kept, some of which are treated as quality records, others not as stringent. Quality records maintain a history of: changes performed after approval, the reason for the change(s), and a record of whom and when

Linear array of photodiodes to track a human speaker for video recording

International Nuclear Information System (INIS)

DeTone, D; Neal, H; Lougheed, R

2012-01-01

Communication and collaboration using stored digital media has garnered more interest by many areas of business, government and education in recent years. This is due primarily to improvements in the quality of cameras and speed of computers. An advantage of digital media is that it can serve as an effective alternative when physical interaction is not possible. Video recordings that allow for viewers to discern a presenter's facial features, lips and hand motions are more effective than videos that do not. To attain this, one must maintain a video capture in which the speaker occupies a significant portion of the captured pixels. However, camera operators are costly, and often do an imperfect job of tracking presenters in unrehearsed situations. This creates motivation for a robust, automated system that directs a video camera to follow a presenter as he or she walks anywhere in the front of a lecture hall or large conference room. Such a system is presented. The system consists of a commercial, off-the-shelf pan/tilt/zoom (PTZ) color video camera, a necklace of infrared LEDs and a linear photodiode array detector. Electronic output from the photodiode array is processed to generate the location of the LED necklace, which is worn by a human speaker. The computer controls the video camera movements to record video of the speaker. The speaker's vertical position and depth are assumed to remain relatively constant– the video camera is sent only panning (horizontal) movement commands. The LED necklace is flashed at 70Hz at a 50% duty cycle to provide noise-filtering capability. The benefit to using a photodiode array versus a standard video camera is its higher frame rate (4kHz vs. 60Hz). The higher frame rate allows for the filtering of infrared noise such as sunlight and indoor lighting–a capability absent from other tracking technologies. The system has been tested in a large lecture hall and is shown to be effective.

Linear array of photodiodes to track a human speaker for video recording

Science.gov (United States)

DeTone, D.; Neal, H.; Lougheed, R.

2012-12-01

Communication and collaboration using stored digital media has garnered more interest by many areas of business, government and education in recent years. This is due primarily to improvements in the quality of cameras and speed of computers. An advantage of digital media is that it can serve as an effective alternative when physical interaction is not possible. Video recordings that allow for viewers to discern a presenter's facial features, lips and hand motions are more effective than videos that do not. To attain this, one must maintain a video capture in which the speaker occupies a significant portion of the captured pixels. However, camera operators are costly, and often do an imperfect job of tracking presenters in unrehearsed situations. This creates motivation for a robust, automated system that directs a video camera to follow a presenter as he or she walks anywhere in the front of a lecture hall or large conference room. Such a system is presented. The system consists of a commercial, off-the-shelf pan/tilt/zoom (PTZ) color video camera, a necklace of infrared LEDs and a linear photodiode array detector. Electronic output from the photodiode array is processed to generate the location of the LED necklace, which is worn by a human speaker. The computer controls the video camera movements to record video of the speaker. The speaker's vertical position and depth are assumed to remain relatively constant- the video camera is sent only panning (horizontal) movement commands. The LED necklace is flashed at 70Hz at a 50% duty cycle to provide noise-filtering capability. The benefit to using a photodiode array versus a standard video camera is its higher frame rate (4kHz vs. 60Hz). The higher frame rate allows for the filtering of infrared noise such as sunlight and indoor lighting-a capability absent from other tracking technologies. The system has been tested in a large lecture hall and is shown to be effective.

Detection of extremely high bit density signals with a narrow track width GMR head in double layered perpendicular recording media

International Nuclear Information System (INIS)

Kiya, T.; Honda, N.; Ariake, J.; Ouchi, K.; Iwasaki, S.

2001-01-01

Recording resolution, medium noise and thermal stability have been investigated for double layered perpendicular magnetic recording media. The recording performance was improved by introducing a stacked intermediate layer between a soft magnetic backlayer and a storage layer due to increased crystal orientation with a small magnetic domain size and suppressed initial growing layer of the storage layer. The reproduced output at an extremely high linear density of 950 kFRPI was detected by using a contact-type CF-SPT head for write and a GMR head with a narrow read track width of 0.4 μm

Proven Weight Loss Methods

Science.gov (United States)

Fact Sheet Proven Weight Loss Methods What can weight loss do for you? Losing weight can improve your health in a number of ways. It can lower ... at www.hormone.org/Spanish . Proven Weight Loss Methods Fact Sheet www.hormone.org

Science and technology with nuclear tracks in solids

CERN Document Server

Buford-Price, P

2005-01-01

Fission track dating has greatly expanded its usefulness to geology over the last 40 years. It is central to thermochronology—the use of shortened fission tracks to decipher the thermal history, movement, and provenance of rocks. When combined with other indicators, such as zircon color and (U–Th)/He, a range of temperatures from C to C can be studied. Combining fission track analysis with cosmogenic nuclide decay rates, one can study landscape development and denudation of passive margins. Technological applications have expanded from biological filters, radon mapping, and dosimetry to the use of ion track microtechnology in microlithography, micromachining by ion track etching, microscopic field emission tips, magnetic nanowires as magnetoresistive sensors, microfluidic devices, physiology of ion channels in single cells, and so on. In nuclear and particle physics, relatively insensitive glass detectors have been almost single-handedly responsible for our knowledge of cluster radioactivity, and plastic ...

Design and Implementation of Track Record System Based on Android Platform

Directory of Open Access Journals (Sweden)

Zhang Jiachen

2017-01-01

Full Text Available For the problem of losing and missing of vulnerable groups, a track record system is designed. The mobile terminal Android system is used as a platform, with the help of Auto Navi Map Android SDK positioning function, realize the positioning data acquisition of mobile terminals; using Apache Tomcat Server and MySQL database to build a Server which haves C/S(the client and the server server architecture. The mobile terminal interacts with the server through the JSON data transmission mode based on the HTTP protocol, and the server saves the relevant information provided by the mobile terminal through the JDBC to the corresponding table in the database. It can be used to monitor the trace of the family and friends, compared with the PC terminal, it is not only more flexible, convenient and fast, but also has the characteristics of real-time and high efficiency. Through the test, all functions can be used normally.

Ultra-Wideband Tracking System Design for Relative Navigation

Science.gov (United States)

Ni, Jianjun David; Arndt, Dickey; Bgo, Phong; Dekome, Kent; Dusl, John

2011-01-01

This presentation briefly discusses a design effort for a prototype ultra-wideband (UWB) time-difference-of-arrival (TDOA) tracking system that is currently under development at NASA Johnson Space Center (JSC). The system is being designed for use in localization and navigation of a rover in a GPS deprived environment for surface missions. In one application enabled by the UWB tracking, a robotic vehicle carrying equipments can autonomously follow a crewed rover from work site to work site such that resources can be carried from one landing mission to the next thereby saving up-mass. The UWB Systems Group at JSC has developed a UWB TDOA High Resolution Proximity Tracking System which can achieve sub-inch tracking accuracy of a target within the radius of the tracking baseline [1]. By extending the tracking capability beyond the radius of the tracking baseline, a tracking system is being designed to enable relative navigation between two vehicles for surface missions. A prototype UWB TDOA tracking system has been designed, implemented, tested, and proven feasible for relative navigation of robotic vehicles. Future work includes testing the system with the application code to increase the tracking update rate and evaluating the linear tracking baseline to improve the flexibility of antenna mounting on the following vehicle.

On the evening of June 15, 2008, ALICE physicists saw the first tracks at LHC during the first injection test in transfer line TI 2. The Silicon Pixel detector recorded muon tracks produced in the beam dump near Point 2 of the LHC.

CERN Multimedia

Manzari, Vito

2008-01-01

On the evening of June 15, 2008, ALICE physicists saw the first tracks at LHC during the first injection test in transfer line TI 2. The Silicon Pixel detector recorded muon tracks produced in the beam dump near Point 2 of the LHC

Nanoscale measurements of proton tracks using fluorescent nuclear track detectors

Energy Technology Data Exchange (ETDEWEB)

Sawakuchi, Gabriel O., E-mail: gsawakuchi@mdanderson.org; Sahoo, Narayan [Department of Radiation Physics, The University of Texas MD Anderson Cancer Center, Houston, Texas 77030 and Graduate School of Biomedical Sciences, The University of Texas, Houston, Texas 77030 (United States); Ferreira, Felisberto A. [Department of Nuclear Physics, University of Sao Paulo, SP 05508-090 (Brazil); McFadden, Conor H. [Department of Radiation Physics, The University of Texas MD Anderson Cancer Center, Houston, Texas 77030 (United States); Hallacy, Timothy M. [Biophysics Program, Harvard University, Cambridge, Massachusetts 02138 (United States); Granville, Dal A. [Department of Medical Physics, The Ottawa Hospital Cancer Centre, Ottawa, Ontario K1H 8L6 (Canada); Akselrod, Mark S. [Crystal Growth Division, Landauer, Inc., Stillwater, Oklahoma 74074 (United States)

2016-05-15

Purpose: The authors describe a method in which fluorescence nuclear track detectors (FNTDs), novel track detectors with nanoscale spatial resolution, are used to determine the linear energy transfer (LET) of individual proton tracks from proton therapy beams by allowing visualization and 3D reconstruction of such tracks. Methods: FNTDs were exposed to proton therapy beams with nominal energies ranging from 100 to 250 MeV. Proton track images were then recorded by confocal microscopy of the FNTDs. Proton tracks in the FNTD images were fit by using a Gaussian function to extract fluorescence amplitudes. Histograms of fluorescence amplitudes were then compared with LET spectra. Results: The authors successfully used FNTDs to register individual proton tracks from high-energy proton therapy beams, allowing reconstruction of 3D images of proton tracks along with delta rays. The track amplitudes from FNTDs could be used to parameterize LET spectra, allowing the LET of individual proton tracks from therapeutic proton beams to be determined. Conclusions: FNTDs can be used to directly visualize proton tracks and their delta rays at the nanoscale level. Because the track intensities in the FNTDs correlate with LET, they could be used further to measure LET of individual proton tracks. This method may be useful for measuring nanoscale radiation quantities and for measuring the LET of individual proton tracks in radiation biology experiments.

Lowering the Barrier to Reproducible Research by Publishing Provenance from Common Analytical Tools

Science.gov (United States)

Jones, M. B.; Slaughter, P.; Walker, L.; Jones, C. S.; Missier, P.; Ludäscher, B.; Cao, Y.; McPhillips, T.; Schildhauer, M.

2015-12-01

Scientific provenance describes the authenticity, origin, and processing history of research products and promotes scientific transparency by detailing the steps in computational workflows that produce derived products. These products include papers, findings, input data, software products to perform computations, and derived data and visualizations. The geosciences community values this type of information, and, at least theoretically, strives to base conclusions on computationally replicable findings. In practice, capturing detailed provenance is laborious and thus has been a low priority; beyond a lab notebook describing methods and results, few researchers capture and preserve detailed records of scientific provenance. We have built tools for capturing and publishing provenance that integrate into analytical environments that are in widespread use by geoscientists (R and Matlab). These tools lower the barrier to provenance generation by automating capture of critical information as researchers prepare data for analysis, develop, test, and execute models, and create visualizations. The 'recordr' library in R and the `matlab-dataone` library in Matlab provide shared functions to capture provenance with minimal changes to normal working procedures. Researchers can capture both scripted and interactive sessions, tag and manage these executions as they iterate over analyses, and then prune and publish provenance metadata and derived products to the DataONE federation of archival repositories. Provenance traces conform to the ProvONE model extension of W3C PROV, enabling interoperability across tools and languages. The capture system supports fine-grained versioning of science products and provenance traces. By assigning global identifiers such as DOIs, reseachers can cite the computational processes used to reach findings. And, finally, DataONE has built a web portal to search, browse, and clearly display provenance relationships between input data, the software

Semi-automated analysis of three-dimensional track images

International Nuclear Information System (INIS)

Meesen, G.; Poffijn, A.

2001-01-01

In the past, three-dimensional (3-d) track images in solid state detectors were difficult to obtain. With the introduction of the confocal scanning laser microscope it is now possible to record 3-d track images in a non-destructive way. These 3-d track images can latter be used to measure typical track parameters. Preparing the detectors and recording the 3-d images however is only the first step. The second step in this process is enhancing the image quality by means of deconvolution techniques to obtain the maximum possible resolution. The third step is extracting the typical track parameters. This can be done on-screen by an experienced operator. For large sets of data however, this manual technique is not desirable. This paper will present some techniques to analyse 3-d track data in an automated way by means of image analysis routines. Advanced thresholding techniques guarantee stable results in different recording situations. By using pre-knowledge about the track shape, reliable object identification is obtained. In case of ambiguity, manual intervention is possible

Use of laser induced breakdown spectroscopy in the determination of gem provenance: beryls

International Nuclear Information System (INIS)

McManus, Catherine E.; McMillan, Nancy J.; Harmon, Russell S.; Whitmore, Robert C.; De Lucia, Frank C. Jr.; Miziolek, Andrzej W.

2008-01-01

The provenance of gem stones has been of interest to geologists, gemologists, archeologists, and historians for centuries. Laser induced breakdown spectroscopy (LIBS) provides a minimally destructive tool for recording the rich chemical signatures of gem beryls (aquamarine, goshenite, heliodor, and morganite). Broadband LIBS spectra of 39 beryl (Be3Al2Si6O18) specimens from 11 pegmatite mines in New Hampshire, Connecticut, and Maine (USA) are used to assess the potential of using principal component analysis of LIBS spectra to determine specimen provenance. Using this technique, beryls from the three beryl-bearing zones in the Palermo no. 1 pegmatite (New Hampshire) can be recognized. However, the compositional variation within this single mine is comparable to that in beryls from all three states. Thus, a very large database with detailed location metadata will be required to routinely determine gem beryl provenance

Feasibility Study of RFID Technology for Construction Load Tracking

Science.gov (United States)

2011-12-31

RFID technology was proven to be successful in tracking dump trucks from loading plant to a paver location on a highway project. The average roundtrip time was 1 hour and 4 minutes. However, 3% of this data has truck delivery times in excess of 2 hou...

Evaluation of aspect-oriented frameworks in Python for extending a project with provenance documentation features

Directory of Open Access Journals (Sweden)

2011-08-01

Full Text Available In this paper we describe two sides of a real life use case of introducing an aspect-oriented framework into an industrial-grade project. This paper is divided into two parts: the selection process for an AOP framework in the Python programming language, and its use for modularized non-invasive recording of provenance data in a distributed data management tool. Criteria for the choice of such a framework are discussed and the background of provenance documentation is laid out.

Light-water-reactor pressure-vessel surveillance dosimetry using solid-state track recorders

International Nuclear Information System (INIS)

Ruddy, F.H.; Roberts, J.H.; Gold, R.; Preston, C.C.

1983-07-01

The accumulation of neutron dose by the pressure vessel of an operating nuclear power plant results in damage in the form of steel embrittlement. In order to ascertain the safe operating lifetime of the reactor pressure vessel, dosimetric measurements must be made to evaluate the neutron dose to the pressure vessel and relate this dose to the cumulative radiation damage. Advanced dosimetry techniques are being evaluated for surveillance of operating reactors. Solid-state track recorder (SSTR) techniques are included among these advanced dosimetry techniques. Described herein are low neutron fluence calibration and standardization measurements that are being carried out in pressure vessel mockup benchmark neutron fields in the USA, Belgium, and England. In addition, high fluence SSTR dosimetry capsules have been irradiated with metallurgical specimens in a pressure vessel mockup facility. The design and deployment of advances SSTR dosimetry capsules in operating power reactors are also described

Tracking the Implementation of Electronic Medical Records in Dubai, United Arab Emirates, Using an Adoption Benchmarking Tool.

Science.gov (United States)

El-Hassan, Osama; Sharif, Amer; Al Redha, Mohammad; Blair, Iain

2017-01-01

In the United Arab Emirates (UAE), health services have developed greatly in the past 40 years. To ensure they continue to meet the needs of the population, innovation and change are required including investment in a strong e-Health infrastructure with a single transferrable electronic patient record. In this paper, using the Emirate of Dubai as a case study, we report on the Middle East Electronic Medical Record Adoption Model (EMRAM). Between 2011-2016, the number of participating hospitals has increased from 23 to 33. Currently, while 20/33 of hospitals are at Stage 2 or less, 10/33 have reached Stage 5. Also Dubai's median EMRAM score in 2016 (2.5) was higher than the scores reported from Australia (2.2), New Zealand (2.3), Malaysia (0.06), the Philippines (0.06) and Thailand (0.5). EMRAM has allowed the tracking of the progress being made by healthcare facilities in Dubai towards upgrading their information technology infrastructure and the introduction of electronic medical records.

Provenance for Runtime Workflow Steering and Validation in Computational Seismology

Science.gov (United States)

Spinuso, A.; Krischer, L.; Krause, A.; Filgueira, R.; Magnoni, F.; Muraleedharan, V.; David, M.

2014-12-01

Provenance systems may be offered by modern workflow engines to collect metadata about the data transformations at runtime. If combined with effective visualisation and monitoring interfaces, these provenance recordings can speed up the validation process of an experiment, suggesting interactive or automated interventions with immediate effects on the lifecycle of a workflow run. For instance, in the field of computational seismology, if we consider research applications performing long lasting cross correlation analysis and high resolution simulations, the immediate notification of logical errors and the rapid access to intermediate results, can produce reactions which foster a more efficient progress of the research. These applications are often executed in secured and sophisticated HPC and HTC infrastructures, highlighting the need for a comprehensive framework that facilitates the extraction of fine grained provenance and the development of provenance aware components, leveraging the scalability characteristics of the adopted workflow engines, whose enactment can be mapped to different technologies (MPI, Storm clusters, etc). This work looks at the adoption of W3C-PROV concepts and data model within a user driven processing and validation framework for seismic data, supporting also computational and data management steering. Validation needs to balance automation with user intervention, considering the scientist as part of the archiving process. Therefore, the provenance data is enriched with community-specific metadata vocabularies and control messages, making an experiment reproducible and its description consistent with the community understandings. Moreover, it can contain user defined terms and annotations. The current implementation of the system is supported by the EU-Funded VERCE (http://verce.eu). It provides, as well as the provenance generation mechanisms, a prototypal browser-based user interface and a web API built on top of a NoSQL storage

77 FR 5313 - Privacy Act of 1974; System of Records

Science.gov (United States)

2012-02-02

... Affairs (VA) is amending the system of records entitled ``Alternative Dispute Resolution Tracking System... records entitled ``Alternative Dispute Resolution Tracking System-VA'' (116VA09) in 67 FR 49392-49395 (July 30, 2002). The system of records tracked alternative dispute resolution (ADR) activity within VA...

Microwave-assisted shingled magnetic recording simulations on an exchange-coupled composite medium

Energy Technology Data Exchange (ETDEWEB)

Tanaka, T., E-mail: t-tanaka@ed.kyushu-u.ac.jp [Department of Electronics, Graduate School of Information Science and Electrical Engineering, Kyushu University, Motoota 744, Nishi-ku, Fukuoka 819-0395 (Japan); Kashiwagi, S. [Department of Electronics, Graduate School of Information Science and Electrical Engineering, Kyushu University, Motoota 744, Nishi-ku, Fukuoka 819-0395 (Japan); Kanai, Y. [Department of Information and Electronics Engineering, Niigata Institute of Technology, Fujihashi 1719, Kashiwazaki, Niigata 945-1195 (Japan); Matsuyama, K. [Department of Electronics, Graduate School of Information Science and Electrical Engineering, Kyushu University, Motoota 744, Nishi-ku, Fukuoka 819-0395 (Japan)

2016-10-15

The potential of microwave-assisted magnetic recording combined with the shingled recording scheme has been studied by simulating read/write processes on exchange-coupled composite media focusing on recording characteristics in the cross-track direction. Microwave fields enhance writability, especially at the track edge, resulting in lower noise and higher signal-to-noise ratio (SNR), which enables higher track density in the shingled recording scheme. Read/write simulations of microwave-assisted shingled recording achieve 1.4 Mtracks/in. while retaining high SNR. Further increases in SNR and track density will require either a narrower reader or track edge noise reduction. - Highlights: • Signal recording of shingled magnetic recording using an asymmetric single pole type head combined with a microwave assistance was numerically demonstrated. • Writability is improved by microwave fields with a moderate frequency at the track edge of the shielded side, resulting in higher signal-to-noise ratio. • 1.41 Mtpi of track density is feasible for the recording scheme of shingled magnetic recording with microwave assistance.

Microwave-assisted shingled magnetic recording simulations on an exchange-coupled composite medium

International Nuclear Information System (INIS)

Tanaka, T.; Kashiwagi, S.; Kanai, Y.; Matsuyama, K.

2016-01-01

The potential of microwave-assisted magnetic recording combined with the shingled recording scheme has been studied by simulating read/write processes on exchange-coupled composite media focusing on recording characteristics in the cross-track direction. Microwave fields enhance writability, especially at the track edge, resulting in lower noise and higher signal-to-noise ratio (SNR), which enables higher track density in the shingled recording scheme. Read/write simulations of microwave-assisted shingled recording achieve 1.4 Mtracks/in. while retaining high SNR. Further increases in SNR and track density will require either a narrower reader or track edge noise reduction. - Highlights: • Signal recording of shingled magnetic recording using an asymmetric single pole type head combined with a microwave assistance was numerically demonstrated. • Writability is improved by microwave fields with a moderate frequency at the track edge of the shielded side, resulting in higher signal-to-noise ratio. • 1.41 Mtpi of track density is feasible for the recording scheme of shingled magnetic recording with microwave assistance.

21 CFR 1271.290 - Tracking.

Science.gov (United States)

2010-04-01

... TISSUE-BASED PRODUCTS Current Good Tissue Practice § 1271.290 Tracking. (a) General. If you perform any... designed to facilitate effective tracking, using the distinct identification code, from the donor to the... for recording the distinct identification code and type of each HCT/P distributed to a consignee to...

Tracking a "facer's" behavior in a public plaza

DEFF Research Database (Denmark)

2014-01-01

The video shows the tracking of a "facer's" behavior in a public plaza using a thermal camera (non-privacy violating) and a visualization of the tracks in a space-time cube in a 3D GIS. The tracking data is used in my PhD project on Human Movement Patterns in Smart Cities. The recording and analy...... and analysis of the thermal video has been made in collaboration with Rikke Gade from the Visual Analytics of People Lab at Aalborg University.......The video shows the tracking of a "facer's" behavior in a public plaza using a thermal camera (non-privacy violating) and a visualization of the tracks in a space-time cube in a 3D GIS. The tracking data is used in my PhD project on Human Movement Patterns in Smart Cities. The recording...

Smart applications to track and record physical activity: implications for obesity treatment

Directory of Open Access Journals (Sweden)

Wong SS

2014-07-01

Full Text Available Siew Sun Wong,1 Yu Meng,1 Paul D Loprinzi,2 Nobuko Hongu3 1School of Biological and Population Health Sciences, Oregon State University, Corvallis, OR, USA; 2Department of Exercise Science, Donna and Allan Lansing School of Nursing and Health Sciences, Bellarmine University, Louisville, KY, USA; 3Department of Nutritional Sciences, University of Arizona, Tucson, AZ, USA Abstract: The primary purpose of this review is to answer three research questions: 1 What are the most popular features of physical activity (PA tracking and recording mobile applications (apps; 2 what features drive the app cost, peak rank, or gross sales; and 3 to what extent are evidence-based weight loss recommendations used in PA apps? Two hundred top grossing iOS health care and fitness apps were screened using a systematic review method. Fifty-five apps met the criteria as PA tracking and recording apps. Nearly half of these iOS PA apps are also available in Android. Two separate reviewers evaluated each PA app using 48 features. The top three most popular features are the use of behavioral strategies, use of the FITT Principles (frequency, intensity, time, type, and the use of the Principles for Physical Fitness. Free apps contain a mean of nine of the ten most popular features in paid apps, making them good bargains in PA promotion. Better peak rank is associated with the use of Fitness Principles, weight loss goal setting, or training videos. Ten PA apps met at least four of eight of the American College of Sports Medicine (ACSM recommendations for weight loss and prevention of weight regain for adults. The least popular features were PA safety and workouts for special need populations. Implications for obesity treatment are discussed in relationship to individual end-users, health care providers, and app developers. Because current PA apps still lack validity and compliance to standards for PA safety and data security, medical consultation for weight loss is

The MAJORANA Parts Tracking Database

Science.gov (United States)

Abgrall, N.; Aguayo, E.; Avignone, F. T.; Barabash, A. S.; Bertrand, F. E.; Brudanin, V.; Busch, M.; Byram, D.; Caldwell, A. S.; Chan, Y.-D.; Christofferson, C. D.; Combs, D. C.; Cuesta, C.; Detwiler, J. A.; Doe, P. J.; Efremenko, Yu.; Egorov, V.; Ejiri, H.; Elliott, S. R.; Esterline, J.; Fast, J. E.; Finnerty, P.; Fraenkle, F. M.; Galindo-Uribarri, A.; Giovanetti, G. K.; Goett, J.; Green, M. P.; Gruszko, J.; Guiseppe, V. E.; Gusev, K.; Hallin, A. L.; Hazama, R.; Hegai, A.; Henning, R.; Hoppe, E. W.; Howard, S.; Howe, M. A.; Keeter, K. J.; Kidd, M. F.; Kochetov, O.; Konovalov, S. I.; Kouzes, R. T.; LaFerriere, B. D.; Leon, J. Diaz; Leviner, L. E.; Loach, J. C.; MacMullin, J.; Martin, R. D.; Meijer, S. J.; Mertens, S.; Miller, M. L.; Mizouni, L.; Nomachi, M.; Orrell, J. L.; O`Shaughnessy, C.; Overman, N. R.; Petersburg, R.; Phillips, D. G.; Poon, A. W. P.; Pushkin, K.; Radford, D. C.; Rager, J.; Rielage, K.; Robertson, R. G. H.; Romero-Romero, E.; Ronquest, M. C.; Shanks, B.; Shima, T.; Shirchenko, M.; Snavely, K. J.; Snyder, N.; Soin, A.; Suriano, A. M.; Tedeschi, D.; Thompson, J.; Timkin, V.; Tornow, W.; Trimble, J. E.; Varner, R. L.; Vasilyev, S.; Vetter, K.; Vorren, K.; White, B. R.; Wilkerson, J. F.; Wiseman, C.; Xu, W.; Yakushev, E.; Young, A. R.; Yu, C.-H.; Yumatov, V.; Zhitnikov, I.

2015-04-01

The MAJORANA DEMONSTRATOR is an ultra-low background physics experiment searching for the neutrinoless double beta decay of 76Ge. The MAJORANA Parts Tracking Database is used to record the history of components used in the construction of the DEMONSTRATOR. The tracking implementation takes a novel approach based on the schema-free database technology CouchDB. Transportation, storage, and processes undergone by parts such as machining or cleaning are linked to part records. Tracking parts provide a great logistics benefit and an important quality assurance reference during construction. In addition, the location history of parts provides an estimate of their exposure to cosmic radiation. A web application for data entry and a radiation exposure calculator have been developed as tools for achieving the extreme radio-purity required for this rare decay search.

The MAJORANA Parts Tracking Database

Energy Technology Data Exchange (ETDEWEB)

Abgrall, N. [Nuclear Science Division, Lawrence Berkeley National Laboratory, Berkeley, CA (United States); Aguayo, E. [Pacific Northwest National Laboratory, Richland, WA (United States); Avignone, F.T. [Department of Physics and Astronomy, University of South Carolina, Columbia, SC (United States); Oak Ridge National Laboratory, Oak Ridge, TN (United States); Barabash, A.S. [Institute for Theoretical and Experimental Physics, Moscow (Russian Federation); Bertrand, F.E. [Oak Ridge National Laboratory, Oak Ridge, TN (United States); Brudanin, V. [Joint Institute for Nuclear Research, Dubna (Russian Federation); Busch, M. [Department of Physics, Duke University, Durham, NC (United States); Triangle Universities Nuclear Laboratory, Durham, NC (United States); Byram, D. [Department of Physics, University of South Dakota, Vermillion, SD (United States); Caldwell, A.S. [South Dakota School of Mines and Technology, Rapid City, SD (United States); Chan, Y-D. [Nuclear Science Division, Lawrence Berkeley National Laboratory, Berkeley, CA (United States); Christofferson, C.D. [South Dakota School of Mines and Technology, Rapid City, SD (United States); Combs, D.C. [Department of Physics, North Carolina State University, Raleigh, NC (United States); Triangle Universities Nuclear Laboratory, Durham, NC (United States); Cuesta, C.; Detwiler, J.A.; Doe, P.J. [Center for Experimental Nuclear Physics and Astrophysics, and Department of Physics, University of Washington, Seattle, WA (United States); Efremenko, Yu. [Department of Physics and Astronomy, University of Tennessee, Knoxville, TN (United States); Egorov, V. [Joint Institute for Nuclear Research, Dubna (Russian Federation); Ejiri, H. [Research Center for Nuclear Physics and Department of Physics, Osaka University, Ibaraki, Osaka (Japan); Elliott, S.R. [Los Alamos National Laboratory, Los Alamos, NM (United States); and others

2015-04-11

The MAJORANA DEMONSTRATOR is an ultra-low background physics experiment searching for the neutrinoless double beta decay of {sup 76}Ge. The MAJORANA Parts Tracking Database is used to record the history of components used in the construction of the DEMONSTRATOR. The tracking implementation takes a novel approach based on the schema-free database technology CouchDB. Transportation, storage, and processes undergone by parts such as machining or cleaning are linked to part records. Tracking parts provide a great logistics benefit and an important quality assurance reference during construction. In addition, the location history of parts provides an estimate of their exposure to cosmic radiation. A web application for data entry and a radiation exposure calculator have been developed as tools for achieving the extreme radio-purity required for this rare decay search.

Multivariate analysis in provenance studies: Cerrillos obsidians case, Peru

International Nuclear Information System (INIS)

Bustamante, A.; Delgado, M.; Latini, R. M.; Bellido, A. V. B.

2007-01-01

We present the preliminary results of a provenance study of obsidians samples from Cerrillos (ca. 800-100 b.c.) using Moessbauer Spectroscopy. The Cerrillos archaeological site, located in the Upper Ica Valley, Peru, is the only Paracas ceremonial center excavated so far. The archaeological data collected suggest the existence of a complex social and economic organization on the south coast of Peru. Provenance research of obsidian provides valuable information about the selection of lithic resources by our ancestors and eventually about the existence of communication routes and exchange networks. We characterized 18 obsidian artifacts samples by Moessbauer spectroscopy from Cerrillos. The spectra, recorded at room temperature using different velocities, are mainly composed of broad asymmetric doublets due to the superposition of at least two quadrupole doublets corresponding to Fe 2+ in two different sites (species A and B), one weak Fe 3+ doublet (specie C) and magnetic components associated to the presence of small particles of magnetite. Multivariate statistical analysis of the Moessbauer data (hyperfine parameters) allows to defined two main groups of obsidians, reflecting different geographical origins.

Multivariate analysis in provenance studies: Cerrillos obsidians case, Peru

Science.gov (United States)

Bustamante, A.; Delgado, M.; Latini, R. M.; Bellido, A. V. B.

2007-02-01

We present the preliminary results of a provenance study of obsidians samples from Cerrillos (ca. 800 100 b.c.) using Mössbauer Spectroscopy. The Cerrillos archaeological site, located in the Upper Ica Valley, Peru, is the only Paracas ceremonial center excavated so far. The archaeological data collected suggest the existence of a complex social and economic organization on the south coast of Peru. Provenance research of obsidian provides valuable information about the selection of lithic resources by our ancestors and eventually about the existence of communication routes and exchange networks. We characterized 18 obsidian artifacts samples by Mössbauer spectroscopy from Cerrillos. The spectra, recorded at room temperature using different velocities, are mainly composed of broad asymmetric doublets due to the superposition of at least two quadrupole doublets corresponding to Fe2+ in two different sites (species A and B), one weak Fe3+ doublet (specie C) and magnetic components associated to the presence of small particles of magnetite. Multivariate statistical analysis of the Mössbauer data (hyperfine parameters) allows to defined two main groups of obsidians, reflecting different geographical origins.

Drift chamber tracking with neural networks

International Nuclear Information System (INIS)

Lindsey, C.S.; Denby, B.; Haggerty, H.

1992-10-01

We discuss drift chamber tracking with a commercial log VLSI neural network chip. Voltages proportional to the drift times in a 4-layer drift chamber were presented to the Intel ETANN chip. The network was trained to provide the intercept and slope of straight tracks traversing the chamber. The outputs were recorded and later compared off line to conventional track fits. Two types of network architectures were studied. Applications of neural network tracking to high energy physics detector triggers is discussed

Permanent recording of transient lattice perturbations

International Nuclear Information System (INIS)

Russell, F.M.

1989-04-01

A new solid-state recording mechanism has been identified which is capable of recording the tracks of charged light leptons and the tracks of uncharged supra-ballistic phonons. The dynamic range for recording charged leptons exceeds 50:1 with a minimum sensitivity of dE/dx ≅ 0.01 MeV/cm. For supra-ballistic phonons their energy must exceed ≅ 10eV to be recorded. The recording mechanism depends upon the presence in a crystal of muscovite of a low concentration of mobile impurity atoms which are normally energetically unable to accrete. The passage of a charged particle or of an energetic ballistic phonon locally modifies the crystal internal potentials to allow the impurity atoms to accrete, driven by their thermal energy, to form stable nucleation sites. Further accretion of the impurity at the nucleation sites causes massive decoration giving a lateral magnification of upto 10 5 and so rendering the tracks visible to the unaided eye. (Author)

Self-Tracking, Social Media and Personal Health Records for Patient Empowered Self-Care. Contribution of the IMIA Social Media Working Group.

Science.gov (United States)

Paton, C; Hansen, M; Fernandez-Luque, L; Lau, A Y S

2012-01-01

This paper explores the range of self-tracking devices and social media platforms used by the self-tracking community, and examines the implications of widespread adoption of these tools for scientific progress in health informatics. A literature review was performed to investigate the use of social media and self-tracking technologies in the health sector. An environmental scan identified a range of products and services which were used to exemplify three levels of self-tracking: self-experimentation, social sharing of data and patient controlled electronic health records. There appears to be an increase in the use of self-tracking tools, particularly in the health and fitness sector, but also used in the management of chronic diseases. Evidence of efficacy and effectiveness is limited to date, primarily due to the health and fitness focus of current solutions as opposed to their use in disease management. Several key technologies are converging to produce a trend of increased personal health surveillance and monitoring, social connectedness and sharing, and integration of regional and national health information systems. These trends are enabling new applications of scientific techniques, from personal experimentation to e-epidemiology, as data gathered by individuals are aggregated and shared across increasingly connected healthcare networks. These trends also raise significant new ethical and scientific issues that will need to be addressed, both by health informatics researchers and the communities of self-trackers themselves.

Trace-element and Nd-isotope systematics in detrital apatite of the Po river catchment: Implications for provenance discrimination and the lag-time approach to detrital thermochronology

Science.gov (United States)

Malusà, Marco G.; Wang, Jiangang; Garzanti, Eduardo; Liu, Zhi-Chao; Villa, Igor M.; Wittmann, Hella

2017-10-01

Detrital thermochronology is often employed to assess the evolutionary stage of an entire orogenic belt using the lag-time approach, i.e., the difference between the cooling and depositional ages of detrital mineral grains preserved in a stratigraphic succession. The impact of different eroding sources to the final sediment sink is controlled by several factors, including the short-term erosion rate and the mineral fertility of eroded bedrock. Here, we use apatite fertility data and cosmogenic-derived erosion rates in the Po river catchment (Alps-Apennines) to calculate the expected percentage of apatite grains supplied to the modern Po delta from the major Alpine and Apenninic eroding sources. We test these predictions by using a cutting-edge dataset of trace-element and Nd-isotope signatures on 871 apatite grains from 14 modern sand samples, and we use apatite fission-track data to validate our geochemical approach to provenance discrimination. We found that apatite grains shed from different sources are geochemically distinct. Apatites from the Lepontine dome in the Central Alps show relative HREE enrichment, lower concentrations in Ce and U, and higher 147Sm/144Nd ratios compared to apatites derived from the External Massifs. Derived provenance budgets point to a dominant apatite contribution to the Po delta from the high-fertility Lepontine dome, consistent with the range independently predicted from cosmonuclide and mineral-fertility data. Our results demonstrate that the single-mineral record in the final sediment sink can be largely determined by high-fertility source rocks exposed in rapidly eroding areas within the drainage. This implies that the detrital thermochronology record may reflect processes affecting relatively small parts of the orogenic system under consideration. A reliable approach to lag-time analysis would thus benefit from an independent provenance discrimination of dated mineral grains, which may allow to proficiently reconsider many

Improving Metadata Compliance for Earth Science Data Records

Science.gov (United States)

Armstrong, E. M.; Chang, O.; Foster, D.

2014-12-01

One of the recurring challenges of creating earth science data records is to ensure a consistent level of metadata compliance at the granule level where important details of contents, provenance, producer, and data references are necessary to obtain a sufficient level of understanding. These details are important not just for individual data consumers but also for autonomous software systems. Two of the most popular metadata standards at the granule level are the Climate and Forecast (CF) Metadata Conventions and the Attribute Conventions for Dataset Discovery (ACDD). Many data producers have implemented one or both of these models including the Group for High Resolution Sea Surface Temperature (GHRSST) for their global SST products and the Ocean Biology Processing Group for NASA ocean color and SST products. While both the CF and ACDD models contain various level of metadata richness, the actual "required" attributes are quite small in number. Metadata at the granule level becomes much more useful when recommended or optional attributes are implemented that document spatial and temporal ranges, lineage and provenance, sources, keywords, and references etc. In this presentation we report on a new open source tool to check the compliance of netCDF and HDF5 granules to the CF and ACCD metadata models. The tool, written in Python, was originally implemented to support metadata compliance for netCDF records as part of the NOAA's Integrated Ocean Observing System. It outputs standardized scoring for metadata compliance for both CF and ACDD, produces an objective summary weight, and can be implemented for remote records via OPeNDAP calls. Originally a command-line tool, we have extended it to provide a user-friendly web interface. Reports on metadata testing are grouped in hierarchies that make it easier to track flaws and inconsistencies in the record. We have also extended it to support explicit metadata structures and semantic syntax for the GHRSST project that can be

Proton an alpha detections by track recording technique in CR-39

International Nuclear Information System (INIS)

Oliveira, W.A. de; Franco, M.A.R.; Herdade, S.B.; Khouri, M.C.F.; Goncalez, O.L.

1986-07-01

The plastic CR-39 is utilized as proton track detector in the study of the reaction 27 A (e, p) and 59 Co (e, p), near threshold. Preliminary results are presented for the energy calibration (mean track diameter as a function of proton energy) of CR-39 with mono-energetic protons of a Van de Graaff accelerator, in the energy range 1-3 MeV. (author) [pt

Decontamination and Decommissioning Equipment Tracking System (DDETS)

International Nuclear Information System (INIS)

Cook, S.

1994-07-01

At the request of the Department of Energy (DOE)(EM-50), the Scientific Computing Unit developed a prototype system to track information and data relevant to equipment and tooling removed during decontamination and decommissioning activities. The DDETS proof-of-concept tracking system utilizes a one-dimensional (1D) and two-dimensional (2D) bar coding technology to retain and track information such as identification number, manufacturer, requisition information, and various contaminant information, etc. The information is encoded in a bar code, printed on a label and can be attached to corresponding equipment. The DDETS was developed using a proven relational database management system which allows the addition, modification, printing, and deletion of data. In addition, communication interfaces with bar code printers and bar code readers were developed. Additional features of the system include: (a) Four different reports available for the user (REAPS, transaction, and two inventory), (b) Remote automated inventory tracking capabilities, (c) Remote automated inventory tracking capability (2D bar codes allow equipment to be scanned/tracked without being linked to the DDETS database), (d) Edit, update, delete, and query capabilities, (e) On-line bar code label printing utility (data from 2D bar codes can be scanned directly into the data base simplifying data entry), and (f) Automated data backup utility. Compatibility with the Reportable Excess Automated Property System (REAPS) to upload data from DDETS is planned

Logical provenance in data-oriented workflows?

KAUST Repository

Ikeda, R.; Das Sarma, Akash; Widom, J.

2013-01-01

for general transformations, introducing the notions of correctness, precision, and minimality. We then determine when properties such as correctness and minimality carry over from the individual transformations' provenance to the workflow provenance. We

Case Analysis Tracking System

Data.gov (United States)

National Archives and Records Administration — CATS tracks Public and Federal Agency Reference Requests for OPF (Official Personnel Folder) , EMF (Employee Medical Folder), and eOPF (electronic Official Personnel...

Deriving a sea surface temperature record suitable for climate change research from the along-track scanning radiometers

Science.gov (United States)

Merchant, C. J.; Llewellyn-Jones, D.; Saunders, R. W.; Rayner, N. A.; Kent, E. C.; Old, C. P.; Berry, D.; Birks, A. R.; Blackmore, T.; Corlett, G. K.; Embury, O.; Jay, V. L.; Kennedy, J.; Mutlow, C. T.; Nightingale, T. J.; O'Carroll, A. G.; Pritchard, M. J.; Remedios, J. J.; Tett, S.

We describe the approach to be adopted for a major new initiative to derive a homogeneous record of sea surface temperature for 1991 2007 from the observations of the series of three along-track scanning radiometers (ATSRs). This initiative is called (A)RC: (Advanced) ATSR Re-analysis for Climate. The main objectives are to reduce regional biases in retrieved sea surface temperature (SST) to less than 0.1 K for all global oceans, while creating a very homogenous record that is stable in time to within 0.05 K decade-1, with maximum independence of the record from existing analyses of SST used in climate change research. If these stringent targets are achieved, this record will enable significantly improved estimates of surface temperature trends and variability of sufficient quality to advance questions of climate change attribution, climate sensitivity and historical reconstruction of surface temperature changes. The approach includes development of new, consistent estimators for SST for each of the ATSRs, and detailed analysis of overlap periods. Novel aspects of the approach include generation of multiple versions of the record using alternative channel sets and cloud detection techniques, to assess for the first time the effect of such choices. There will be extensive effort in quality control, validation and analysis of the impact on climate SST data sets. Evidence for the plausibility of the 0.1 K target for systematic error is reviewed, as is the need for alternative cloud screening methods in this context.

Multi-Method Provenance Analysis of Namibian Desert Sand

Science.gov (United States)

Vermeesch, P.; Garzanti, E.

2014-12-01

Mineralogical, geochemical and geochronological provenance proxies each have their own strengths and weaknesses: a. Bulk geochemistry, framework petrography and heavy mineral compositions can differentiate between source areas characterised by different lithologies, but are sensitive to hydraulic sorting and chemical alteration. b. Detrital zircon U-Pb geochronology is insensitive to winnowing effects, but is 'blind' to lithologies devoid of zircon and cannot differentiate between first cycle and recycled sediments. c. Cosmogenic neon isotopes can be used to identify different generations of surface exposure while simultaneously tracking different magmatic sources. The challenge is then to combine these different proxies into a self consistent story, and do so in as objective a manner as possible. We here present a case study of Namibia's Namib Sand Sea and Skeleton Coast ergs, in which all the aforementioned methods have been combined using a three-way multidimensional scaling (aka INDividual Differences SCALing or INDSCAL) analysis: 1. Each of the datasets was represented by a 'dissimilarity matrix' of pairwise distances between samples. 2. The set of these matrices was fed into the INDSCAL algorithm, which produces two pieces of graphical output: the 'group configuration', which is a scatter plot or 'map' in which similar samples plot close together and dissimilar samples plot far apart, and the 'proxy weights', in which not the samples but the proxies are plotted according to the weight they attached to the 'group configuration' axes. The INDSCAL map of the Namibia dataset indicates that (a) long-shore drift of Orange River sediments dominates the coastal sediment compositions all along the Namibian coast until Angola, and (b) that light and heavy minerals tell complementary parts of the provenance story.

Feedforward Tracking Control of Flat Recurrent Fuzzy Systems

International Nuclear Information System (INIS)

Gering, Stefan; Adamy, Jürgen

2014-01-01

Flatness based feedforward control has proven to be a feasible solution for the problem of tracking control, which may be applied to a broad class of nonlinear systems. If a flat output of the system is known, the control is often based on a feedforward controller generating a nominal input in combination with a linear controller stabilizing the linearized error dynamics around the trajectory. We show in this paper that the very same idea may be incorporated for tracking control of MIMO recurrent fuzzy systems. Their dynamics is given by means of linguistic differential equations but may be converted into a hybrid system representation, which then serves as the basis for controller synthesis

Feedforward Tracking Control of Flat Recurrent Fuzzy Systems

Science.gov (United States)

Gering, Stefan; Adamy, Jürgen

2014-12-01

Flatness based feedforward control has proven to be a feasible solution for the problem of tracking control, which may be applied to a broad class of nonlinear systems. If a flat output of the system is known, the control is often based on a feedforward controller generating a nominal input in combination with a linear controller stabilizing the linearized error dynamics around the trajectory. We show in this paper that the very same idea may be incorporated for tracking control of MIMO recurrent fuzzy systems. Their dynamics is given by means of linguistic differential equations but may be converted into a hybrid system representation, which then serves as the basis for controller synthesis.

Recording of heavy ion tracks in silicates. Application to the determination of the abundance of ultra-heavy elements in old solar cosmic radiation

International Nuclear Information System (INIS)

Duraud, J.-P.

1978-12-01

The aim of this thesis is to determine the abundance A(Z) and energy spectrum of the elements of atomic number Z present in cosmic radiation, by means of fossil traces recorded in moon and meteorite minerals. The difficulties due amongst other things to natural annealing are examined in detail in part one, of this paper, the outcome being a thorough study of the processes responsible for the formation, chemical attack and annealing of heavy ion tracks. Part two describes an original approach used here and consisting of a combined analysis as a function of annealing for a given track, of the microscopic structure of the latent track and its attack rate. Part three uses the new rules established beforehand to propose a new method of studying the UH ion (Z>30) to VH ion (20 [fr

Golden Trail: Retrieving the Data History that Matters from a Comprehensive Provenance Repository

Directory of Open Access Journals (Sweden)

Paolo Missier

2012-03-01

Full Text Available Experimental science can be thought of as the exploration of a large research space, in search of a few valuable results. While it is this “Golden Data” that gets published, the history of the exploration is often as valuable to the scientists as some of its outcomes. We envision an e-research infrastructure that is capable of systematically and automatically recording such history – an assumption that holds today for a number of workflow management systems routinely used in e-science. In keeping with our gold rush metaphor, the provenance of a valuable result is a “Golden Trail”. Logically, this represents a detailed account of how the Golden Data was arrived at, and technically it is a sub-graph in the much larger graph of provenance traces that collectively tell the story of the entire research (or of some of it.In this paper we describe a model and architecture for a repository dedicated to storing provenance traces and selectively retrieving Golden Trails from it. As traces from multiple experiments over long periods of time are accommodated, the trails may be sub-graphs of one trace, or they may be the logical representation of a virtual experiment obtained by joining together traces that share common data.The project has been carried out within the Provenance Working Group of the Data Observation Network for Earth (DataONE NSF project. Ultimately, our longer-term plan is to integrate the provenance repository into the data preservation architecture currently being developed by DataONE.

Monitoring, Tracking, and Recording Pancreas-Related Health Issues in Real Time

Science.gov (United States)

Chrysikos, Theofilos; Zisi, Iliana; Katsini, Christina; Raptis, George E.; Kotsopoulos, Stavros

2017-11-01

The monitoring of pancreas-related health issues in real-time and outside the medical room is a challenge in the wide e-health domain. This paper introduces WHEAMO, a novel e-health platform which employs medical implants (biosensors), which function as antennas, planted in the pancreas. WHEAMO uses wireless in-body propagation to track, monitor, and record critical parameters, such as glucose. The signal reaches the skin and then it is propagated in an indoor environment (e.g., medical room) over to a terminal equipped with adaptive, user-configurable, and intelligent mechanisms which provide personalized recommendations to varying WHEAMO users (e.g., medical personnel, health care workers, patients). The personalized nature of the provided recommendations is based on patients unique characteristics via a sophisticated knowledge-base. The fundamentals of in-body and on-body wireless propagation and channel characterization have been studied in a series of published works. Researchers have tested both electric-field (dipole) and magnetic-field (patch, loop) antennas. Another important aspect concerns the frequency band in which the signal propagation will occur. Among the frequencies that have gathered scientific and academic interest are the Medical Implant Communication Service (MICS) band at 402-405 MHz, the 900 MHz channel and the industrial, scientific and medical (ISM) radio band at 2.45 GHz.

Provenance trials of larch in Siberia

Energy Technology Data Exchange (ETDEWEB)

Milyutin, L.I. [V.N. Sukachev Inst. of Forest SB RAS, Krasnoyarsk (Russian Federation)

1995-12-31

Some results of provenance trials of larch in Siberia are given. These provenance trials were established in the last thirty years by efforts of V.N. Sukaczev Inst. of Forest. Provenances and species of larch were tested in some field trials distributed over Siberia between Lat. N 52 deg and 66 deg, Long. E 88 deg and 113 deg: near Krasnoyarsk, in Republic Khakasia (an altitudes of 800 and 1200 metres), in the Lower Yenisei near Turukhansk, in the west and south regions of Krasnoyarsk territory, in the Upper Lena, near Chita. 2 refs

Provenance trials of larch in Siberia

Energy Technology Data Exchange (ETDEWEB)

Milyutin, L I [V.N. Sukachev Inst. of Forest SB RAS, Krasnoyarsk (Russian Federation)

1996-12-31

Some results of provenance trials of larch in Siberia are given. These provenance trials were established in the last thirty years by efforts of V.N. Sukaczev Inst. of Forest. Provenances and species of larch were tested in some field trials distributed over Siberia between Lat. N 52 deg and 66 deg, Long. E 88 deg and 113 deg: near Krasnoyarsk, in Republic Khakasia (an altitudes of 800 and 1200 metres), in the Lower Yenisei near Turukhansk, in the west and south regions of Krasnoyarsk territory, in the Upper Lena, near Chita. 2 refs

Colored tracks of heavy ion particles recorded on photographic color film

International Nuclear Information System (INIS)

Kuge, K.; Yasuda, N.; Kumagai, H.; Aoki, N.; Hasegawa, A.

2002-01-01

A new method to obtain the three-dimensional information on nuclear tracks was developed using color photography. Commercial color films were irradiated with ion beam and color-developed. The ion tracks were represented with color images in which different depths were indicated by different colors, and the three-dimensional information was obtained from color changes. Details of this method are reported, and advantages and limitations are discussed in comparison with a conventional method using a nuclear emulsion

Provenance of Fine-grained Sediments in the Inner Shelf of the Korea Strait (South Sea), Korea

Science.gov (United States)

Um, In kwon; Choi, Man Sik; Bae, Sung Ho; Song, Yunho; Kong, Gee Soo

2018-03-01

Major metals (Al, Fe, Mg, and Ti), trace metals (Li, Cs, Sc, and Rb), and rare earth elements (REEs) in the fine-grained sediments (South Sea mud (CSSM) were analyzed to determine the sediment provenance. The spatial distribution of the analyzed elements showed a clear separation between the western (W-CSSM) and eastern (E-CSSM) regions of the CSSM. Concentrations of Fe, Ti, Mg, Sc, and REEs were higher in the WCSSM, whereas concentrations of Al, Cs, Li, and Rb were higher in the E-CSSM. Unlike the ratios of trace metals ((Cs+Sc)/Li and Rb/Li), REEs could not be used to track the provenance of fine-grained sediments because of a grain size effect. The mixing relationships of the provenance indicators showed that the fine-grained sediments of the CSSM comprise a mixture of the sediments discharged from the Seomjin River (SRS) and sediments eroded and transported from the Heuksan mud belt (HMBS) area by the Korean Coastal Current. Sediments originating from the HMB were deposited mostly in the W-CSSM, whereas those from the Seomjin River were deposited mostly in the E-CSSM. This study indicated that sediments from Chinese rivers as well as the Geum River are important even in the inner shelf of the South Sea of Korea.

Solid state nuclear track detection principles, methods and applications

CERN Document Server

Durrani, S A; ter Haar, D

1987-01-01

Solid State Nuclear Track Detection: Principles, Methods and Applications is the second book written by the authors after Nuclear Tracks in Solids: Principles and Applications. The book is meant as an introduction to the subject solid state of nuclear track detection. The text covers the interactions of charged particles with matter; the nature of the charged-particle track; the methodology and geometry of track etching; thermal fading of latent damage trails on tracks; the use of dielectric track recorders in particle identification; radiation dossimetry; and solid state nuclear track detecti

Study of the characteristics of ionizing particles record of CR-39 track detectors

International Nuclear Information System (INIS)

Brandao, Luis Eduardo Barreira

1983-01-01

The bulk and track etching proprieties of a new Solid State Nuclear Track Detector CR-39 were investigated under different etching conditions. The discussion is based on results obtained using aqueous solutions of KOH with addition of alcoholic solvent to aqueous solutions. It was found that track registration sensitivity can be dramatically changed by using the proper chemical treatment. A method to enlarge and dye etch tracks to be viewed by simple projection on a screen is discussed. The applications of CR-39 in neutron fluence measurements are shown. Graphs are presented of the densities of the registered traces by the detector as a function of etch time both for samples with and without a polycarbonate radiator. (author)

Palaeo-dust records: A window to understanding past environments

Science.gov (United States)

Marx, Samuel K.; Kamber, Balz S.; McGowan, Hamish A.; Petherick, Lynda M.; McTainsh, Grant H.; Stromsoe, Nicola; Hooper, James N.; May, Jan-Hendrik

2018-06-01

Dust entrainment, transport over vast distances and subsequent deposition is a fundamental part of the Earth system. Yet the role and importance of dust has been underappreciated, due largely to challenges associated with recognising dust in the landscape and interpreting its depositional history. Despite these challenges, interest in dust is growing. Technical advances in remote sensing and modelling have improved understanding of dust sources and production, while advances in sedimentology, mineralogy and geochemistry (in particular) have allowed dust to be more easily distinguished within sedimentary deposits. This has facilitated the reconstruction of records of dust emissions through time. A key advance in our understanding of dust has occurred following the development of methods to geochemically provenance (fingerprint) dust to its source region. This ability has provided new information on dust transport pathways, as well as the reach and impact of dust. It has also expanded our understanding of the processes driving dust emissions over decadal to millennial timescales through linking dust deposits directly to source area conditions. Dust provenance studies have shown that dust emission, transport and deposition are highly sensitive to variability in climate. They also imply that dust emissions are not simply a function of the degree of aridity in source areas, but respond to a more complex array of conditions, including sediment availability. As well as recording natural variability, dust records are also shown to sensitively track the impact of human activity. This is reflected by both changing dust emission rates and changing dust chemistry. Specific examples of how dust responds to, and records change, are provided with our work on dust emissions from Australia, the most arid inhabited continent and the largest dust source in the Southern Hemisphere. These case studies show that Australian dust emissions reflect hydro-climate variability, with

Lightweight Provenance Service for High-Performance Computing

Energy Technology Data Exchange (ETDEWEB)

Dai, Dong; Chen, Yong; Carns, Philip; Jenkins, John; Ross, Robert

2017-09-09

Provenance describes detailed information about the history of a piece of data, containing the relationships among elements such as users, processes, jobs, and workflows that contribute to the existence of data. Provenance is key to supporting many data management functionalities that are increasingly important in operations such as identifying data sources, parameters, or assumptions behind a given result; auditing data usage; or understanding details about how inputs are transformed into outputs. Despite its importance, however, provenance support is largely underdeveloped in highly parallel architectures and systems. One major challenge is the demanding requirements of providing provenance service in situ. The need to remain lightweight and to be always on often conflicts with the need to be transparent and offer an accurate catalog of details regarding the applications and systems. To tackle this challenge, we introduce a lightweight provenance service, called LPS, for high-performance computing (HPC) systems. LPS leverages a kernel instrument mechanism to achieve transparency and introduces representative execution and flexible granularity to capture comprehensive provenance with controllable overhead. Extensive evaluations and use cases have confirmed its efficiency and usability. We believe that LPS can be integrated into current and future HPC systems to support a variety of data management needs.

Irradiation sensibility of different provenances of Jatropha curcas L. seeds

International Nuclear Information System (INIS)

Yang Qing; Xu Congheng; Peng Daiping; Duan Zhubiao; Han Lei; Sun Qixiang; Peng Zhenhua

2007-01-01

The irradiation sensibility of 10 provenances of Jatropha curcas L. seeds to 60 Co γ-rays was studied. The results showed that the relationship between relative germination rate of the seeds and the doses of irradiation was negative correlation, and the difference of relative germination rate among different doses treatment was significant at 5% probability level or highly significant at 1% probability level. For seeds of different provenances, the correlation coefficient of linear regression was from -0.89--0.96, and the medial lethal doses (LD 50) of 10 provinces was from 127 Gy to 184 Gy. According to the LD 50, we could divided 10 provinces of J. curcas L. into sensitive provenance, transitional provenances and obtuse provenances. The provenances of Yuanjiang , Yunan (184 Gy) belonged to sensitive provenance; the provenances of Zhenfeng, Guizhou (127 Gy) and the provenances of Yuedong, Hainan (141 Gy) belonged to obtuse provenance; other 7 provenances belonged to transitional provenances. The results provided important experiment basis for germ plasma resources innovation of J. curcas L. (authors)

Off-policy integral reinforcement learning optimal tracking control for continuous-time chaotic systems

International Nuclear Information System (INIS)

Wei Qing-Lai; Song Rui-Zhuo; Xiao Wen-Dong; Sun Qiu-Ye

2015-01-01

This paper estimates an off-policy integral reinforcement learning (IRL) algorithm to obtain the optimal tracking control of unknown chaotic systems. Off-policy IRL can learn the solution of the HJB equation from the system data generated by an arbitrary control. Moreover, off-policy IRL can be regarded as a direct learning method, which avoids the identification of system dynamics. In this paper, the performance index function is first given based on the system tracking error and control error. For solving the Hamilton–Jacobi–Bellman (HJB) equation, an off-policy IRL algorithm is proposed. It is proven that the iterative control makes the tracking error system asymptotically stable, and the iterative performance index function is convergent. Simulation study demonstrates the effectiveness of the developed tracking control method. (paper)

Isotopic provenance analysis and terrane tectonics: a warning about sediment transport distances

International Nuclear Information System (INIS)

Bassett, K.N.

1999-01-01

Full text: In the last 10 years the field of provenance analysis has undergone a revolution with the development of single-crystal isotopic dating techniques, the most common being U/Pb zircon and 40Ar/39Ar techniques. These have allowed age determination of single crystals thus providing more detail about probable provenance of each individual grain rather than an averaged population of grains. The usefulness for resolving complex terrane accretion and translation histories was immediately obvious and there have been many studies in many different regions aimed at tracking terrane motions by provenance of individual grains upward through the stratigraphy of a basin. Recent research in the North American Cordilleran terranes and in the New Zealand Torlesse Superterrane show how widely used and powerful these provenance analysis techniques are. However, isotopic provenance analysis has often been presented as key information to resolve controversies around terrane translation histories with very little discussion of the context of sedimentary facies and sediment transport mechanisms. An example is the recent use of U/Pb detrital zircon ages as the supposedly controversy-ending evidence for the amount of lateral translation of the Insular Superterrane in British Columbia (Baja BC) (Mahoney et al., 1999). The zircon grains were separated from fine-grained turbidite deposits and could easily have been transported over very large distances by a variety of mechanisms; yet they were presented as definitively resolving the Baja BC controversy. Modern examples illustrate the problem of using the provenance of fine grained sediment to constrain terrane tectonics. Sediment in the tip of the Bengal submarine fan was transported ∼3000 km from source, first by fluvial processes then by sediment gravity flow in the submarine fan. The detrital isotopic ages of single grains are the same as the depositional ages indicating a very rapid unroofing and transport rate with minimal

S-ProvFlow: provenance model and tools for scalable and adaptive analysis pipelines in geoscience.

Science.gov (United States)

Spinuso, A.; Mihajlovski, A.; Atkinson, M.; Filgueira, R.; Klampanos, I.; Sanchez, S.

2017-12-01

The reproducibility of scientific findings is essential to improve the quality and application of modern data-driven research. Delivering such reproducibility is challenging in the context of systems handling large data-streams with sophisticated computational methods. Similarly, the SKA (Square Kilometer Array) will collect an unprecedented volume of radio-wave signals that will have to be reduced and transformed into derived products, with impact on space-weather research. This highlights the importance of having cross-disciplines mechanisms at the producer's side that rely on usable lineage data to support validation and traceability of the new artifacts. To be informative, provenance has to describe each methods' abstractions and their implementation as mappings onto distributed platforms and their concurrent execution, capturing relevant internal dependencies at runtime. Producers and intelligent toolsets should be able to exploit the produced provenance, steering real-time monitoring activities and inferring adaptations of methods at runtime.We present a model of provenance (S-PROV) that extends W3C PROV and ProvONE, broadening coverage of provenance to aspects related to distribution, scale-up and steering of stateful streaming operators in analytic pipelines. This is supported by a technical framework for tuneable and actionable lineage, ensuring its relevance to the users' interests, fostering its rapid exploitation to facilitate research practices. By applying concepts such as provenance typing and profiling, users define rules to capture common provenance patterns and activate selective controls based on domain-metadata. The traces are recorded in a document-store with index optimisation and a web API serves advanced interactive tools (S-ProvFlow, https://github.com/KNMI/s-provenance). These allow different classes of consumers to rapidly explore the provenance data. The system, which contributes to the SKA-Link initiative, within technology and

Provenance Usage in the OceanLink Project

Science.gov (United States)

Narock, T.; Arko, R. A.; Carbotte, S. M.; Chandler, C. L.; Cheatham, M.; Fils, D.; Finin, T.; Hitzler, P.; Janowicz, K.; Jones, M.; Krisnadhi, A.; Lehnert, K. A.; Mickle, A.; Raymond, L. M.; Schildhauer, M.; Shepherd, A.; Wiebe, P. H.

2014-12-01

A wide spectrum of maturing methods and tools, collectively characterized as the Semantic Web, is helping to vastly improve thedissemination of scientific research. The OceanLink project, an NSF EarthCube Building Block, is utilizing semantic technologies tointegrate geoscience data repositories, library holdings, conference abstracts, and funded research awards. Provenance is a vital componentin meeting both the scientific and engineering requirements of OceanLink. Provenance plays a key role in justification and understanding when presenting users with results aggregated from multiple sources. In the engineering sense, provenance enables the identification of new data and the ability to determine which data sources to query. Additionally, OceanLink will leverage human and machine computation for crowdsourcing, text mining, and co-reference resolution. The results of these computations, and their associated provenance, will be folded back into the constituent systems to continually enhance precision and utility. We will touch on the various roles provenance is playing in OceanLink as well as present our use of the PROV Ontology and associated Ontology Design Patterns.

Eye tracking and the translation process

DEFF Research Database (Denmark)

Hvelplund, Kristian Tangsgaard

2014-01-01

Eye tracking has become increasingly popular as a quantitative research method in translation research. This paper discusses some of the major methodological issues involved in the use of eye tracking in translation research. It focuses specifically on challenges in the analysis and interpretation...... of eye-tracking data as reflections of cognitive processes during translation. Four types of methodological issues are discussed in the paper. The first part discusses the preparatory steps that precede the actual recording of eye-tracking data. The second part examines critically the general assumptions...... linking eye movements to cognitive processing in the context of translation research. The third part of the paper discusses two popular eye-tracking measures often used in translation research, fixations and pupil size, while the fourth part proposes a method to evaluate the quality of eye-tracking data....

Global Land Surface Temperature From the Along-Track Scanning Radiometers

Science.gov (United States)

Ghent, D. J.; Corlett, G. K.; Göttsche, F.-M.; Remedios, J. J.

2017-11-01

The Leicester Along-Track Scanning Radiometer (ATSR) and Sea and Land Surface Temperature Radiometer (SLSTR) Processor for LAnd Surface Temperature (LASPLAST) provides global land surface temperature (LST) products from thermal infrared radiance data. In this paper, the state-of-the-art version of LASPLAST, as deployed in the GlobTemperature project, is described and applied to data from the Advanced Along-Track Scanning Radiometer (AATSR). The LASPLAST retrieval formulation for LST is a nadir-only, two-channel, split-window algorithm, based on biome classification, fractional vegetation, and across-track water vapor dependences. It incorporates globally robust retrieval coefficients derived using highly sampled atmosphere profiles. LASPLAST benefits from appropriate spatial resolution auxiliary information and a new probabilistic-based cloud flagging algorithm. For the first time for a satellite-derived LST product, pixel-level uncertainties characterized in terms of random, locally correlated, and systematic components are provided. The new GlobTemperature GT_ATS_2P Version 1.0 product has been validated for 1 year of AATSR data (2009) against in situ measurements acquired from "gold standard reference" stations: Gobabeb, Namibia, and Evora, Portugal; seven Surface Radiation Budget stations, and the Atmospheric Radiation Measurement station at Southern Great Plains. These data show average absolute biases for the GT_ATS_2P Version 1.0 product of 1.00 K in the daytime and 1.08 K in the nighttime. The improvements in data provenance including better accuracy, fully traceable retrieval coefficients, quantified uncertainty, and more detailed information in the new harmonized format of the GT_ATS_2P product will allow for more significant exploitation of the historical LST data record from the ATSRs and a valuable near-real-time service from the Sea and Land Surface Temperature Radiometers (SLSTRs).

Envisioning the Future of Aquatic Animal Tracking: Technology, Science, and Application

Energy Technology Data Exchange (ETDEWEB)

Lennox, Robert J.; Aarestrup, Kim; Cooke, Steven J.; Cowley, Paul D.; Deng, Zhiqun D.; Fisk, Aaron T.; Harcourt, Robert G.; Heupel, Michelle; Hinch, Scott G.; Holland, Kim N.; Hussey, Nigel E.; Iverson, Sara J.; Kessel, Steven T.; Kocik, John F.; Lucas, Martyn C.; Flemming, Joanna Mills; Nguyen, Vivian M.; Stokesbury, Michael J. W.; Vagle, Svein; VanderZwaag, David L.; Whoriskey, Frederick G.; Young, Nathan

2017-09-13

Electronic tags have proven to be extremely useful for broadening our understanding of aquatic animals by answering diverse questions about their behaviours, physiologies, and life histories fundamental to ecology. Simultaneously, many applied conservation and management efforts are informed by animals tagged with electronic tags. In spite of the many advances in tracking software and hardware, an uncertain future in the world’s aquatic ecosystems portends great challenges for science. Aquatic animal tracking with electronic tags represents both the present and future of integrative biology and ecology in aquatic ecosystems. Here we identify what we regard as the future of aquatic animal tracking in a horizon scanning exercise. We submit that the future of aquatic animal tracking will include opportunities for multi-platform tracking systems for simultaneously monitoring position, activity, physiology, and microhabitat of animals, improved data collection and accessibility with new infrastructure (e.g. tags, receivers) and cyberinfrastructure, and integrated tagging information with animal traits derived from biopsy during tagging. We discuss parallel needs and opportunities in areas related to the application of animal tracking in the future such as knowledge mobilization and governance.

Optimizing experimental parameters for tracking of diffusing particles

DEFF Research Database (Denmark)

Vestergaard, Christian L.

2016-01-01

We describe how a single-particle tracking experiment should be designed in order for its recorded trajectories to contain the most information about a tracked particle's diffusion coefficient. The precision of estimators for the diffusion coefficient is affected by motion blur, limited photon st...

Attaining provenance proxies from OSL and TL sensitivities: Coupling with grain size and heavy minerals data from southern Brazilian coastal sediments

International Nuclear Information System (INIS)

Zular, André; Sawakuchi, André O.; Guedes, Carlos C.F.; Giannini, Paulo C.F.

2015-01-01

In the São Francisco do Sul (SFS) barrier in southern Brazil, the optically stimulated luminescence (OSL) and thermoluminescence (TL) sensitivities of coastal sands vary according to geomorphological units. Sands from older beach ridges (ages older than 2000 years ago) show higher OSL and TL sensitivities than younger units (ages younger than 2000 years). Geomorphological units in the SFS attest to changes in provenance as a result of a coastal climate shift evidenced through grain size and heavy mineral analysis. We argue that in the SFS barrier sands, OSL and TL sensitivity signals provide an additional proxy to climate events and can be used as an alternative method to assess changes in provenance and tracking source-to-sink systems to monitor past and future environmental changes. - Highlights: • OSL and TL sensitivities are confronted with grain size and heavy minerals data. • We report OSL and 110 °C TL sensitivities as provenance proxies. • 110 °C TL sensitivity outlines environmental changes better than OSL sensitivity data.

The track finding algorithm of the Belle II vertex detectors

Directory of Open Access Journals (Sweden)

Bilka Tadeas

2017-01-01

Full Text Available The Belle II experiment is a high energy multi purpose particle detector operated at the asymmetric e+e− - collider SuperKEKB in Tsukuba (Japan. In this work we describe the algorithm performing the pattern recognition for inner tracking detector which consists of two layers of pixel detectors and four layers of double sided silicon strip detectors arranged around the interaction region. The track finding algorithm will be used both during the High Level Trigger on-line track reconstruction and during the off-line full reconstruction. It must provide good efficiency down to momenta as low as 50 MeV/c where material effects are sizeable even in an extremely thin detector as the VXD. In addition it has to be able to cope with the high occupancy of the Belle II detectors due to the background. The underlying concept of the track finding algorithm, as well as details of the implementation are outlined. The algorithm is proven to run with good performance on simulated ϒ(4S → BB̄ events with an efficiency for reconstructing tracks of above 90% over a wide range of momentum.

Provenance-based refresh in data-oriented workflows

KAUST Repository

Ikeda, Robert; Salihoglu, Semih; Widom, Jennifer

2011-01-01

We consider a general workflow setting in which input data sets are processed by a graph of transformations to produce output results. Our goal is to perform efficient selective refresh of elements in the output data, i.e., compute the latest values of specific output elements when the input data may have changed. We explore how data provenance can be used to enable efficient refresh. Our approach is based on capturing one-level data provenance at each transformation when the workflow is run initially. Then at refresh time provenance is used to determine (transitively) which input elements are responsible for given output elements, and the workflow is rerun only on that portion of the data needed for refresh. Our contributions are to formalize the problem setting and the problem itself, to specify properties of transformations and provenance that are required for efficient refresh, and to provide algorithms that apply to a wide class of transformations and workflows. We have built a prototype system supporting the features and algorithms presented in the paper. We report preliminary experimental results on the overhead of provenance capture, and on the crossover point between selective refresh and full workflow recomputation. © 2011 ACM.

3D scanning particle tracking velocimetry

Energy Technology Data Exchange (ETDEWEB)

Hoyer, Klaus; Holzner, Markus; Guala, Michele; Liberzon, Alexander; Kinzelbach, Wolfgang [Swiss Federal Institut of Technology Zurich, Institut fuer Hydromechanik und Wasserwirtschaft, Zuerich (Switzerland); Luethi, Beat [Risoe National Laboratory, Roskilde (Denmark)

2005-11-01

In this article, we present an experimental setup and data processing schemes for 3D scanning particle tracking velocimetry (SPTV), which expands on the classical 3D particle tracking velocimetry (PTV) through changes in the illumination, image acquisition and analysis. 3D PTV is a flexible flow measurement technique based on the processing of stereoscopic images of flow tracer particles. The technique allows obtaining Lagrangian flow information directly from measured 3D trajectories of individual particles. While for a classical PTV the entire region of interest is simultaneously illuminated and recorded, in SPTV the flow field is recorded by sequential tomographic high-speed imaging of the region of interest. The advantage of the presented method is a considerable increase in maximum feasible seeding density. Results are shown for an experiment in homogenous turbulence and compared with PTV. SPTV yielded an average 3,500 tracked particles per time step, which implies a significant enhancement of the spatial resolution for Lagrangian flow measurements. (orig.)

Experimental evaluation of job provenance in ATLAS environment

International Nuclear Information System (INIS)

Krenek, A; Sitera, J; Chudoba, J; Dvorak, F; Filipovic, J; KmunIcek, J; Matyska, L; Mulas, M; Ruda, M; Sustr, Z; Campana, S; Molinari, E; Rebatto, D

2008-01-01

Grid middleware stacks, including gLite, matured into the state of being able to process up to millions of jobs per day. Logging and Bookkeeping, the gLite job-tracking service, keeps pace with this rate; however, it is not designed to provide a long-term archive of information on executed jobs. ATLAS - representative of a large user community - addresses this issue with its own job catalogue (ProdDB). Development of such a customized service, not easily reusable, took considerable effort which is not affordable by smaller communities. On the contrary, Job Provenance (JP), a generic gLite service designed for long-term archiving of information on executed jobs focusing on scalability, extensibility, uniform data view, and configurability, allows more specialized catalogues to be easily built. We present the first results of an experimental JP deployment for the ATLAS production infrastructure where a JP installation was fed with a part of ATLAS jobs, and also stress tested with real production data. The main outcome of this work is a demonstration that JP can complement large-scale application-specific job catalogue services, while serving a similar purpose where there are none available

Computer controlled scanning systems for quantitative track measurements

International Nuclear Information System (INIS)

Gold, R.; Roberts, J.H.; Preston, C.C.; Ruddy, F.H.

1982-01-01

The status of three computer cntrolled systems for quantitative track measurements is described. Two systems, an automated optical track scanner (AOTS) and an automated scanning electron microscope (ASEM) are used for scanning solid state track recorders (SSTR). The third system, the emulsion scanning processor (ESP), is an interactive system used to measure the length of proton tracks in nuclear research emulsions (NRE). Recent advances achieved with these systems are presented, with emphasis placed upon the current limitation of these systems for reactor neutron dosimetry

Silicon Tracking Upgrade at CDF

International Nuclear Information System (INIS)

Kruse, M.C.

1998-04-01

The Collider Detector at Fermilab (CDF) is scheduled to begin recording data from Run II of the Fermilab Tevatron in early 2000. The silicon tracking upgrade constitutes both the upgrade to the CDF silicon vertex detector (SVX II) and the new Intermediate Silicon Layers (ISL) located at radii just beyond the SVX II. Here we review the design and prototyping of all aspects of these detectors including mechanical design, data acquisition, and a trigger based on silicon tracking

Patients with computed tomography-proven acute diverticulitis require follow-up to exclude colorectal cancer

Directory of Open Access Journals (Sweden)

Shafquat Zaman

2017-04-01

Full Text Available Background/Aims: Traditionally, patients with acute diverticulitis undergo follow-up endoscopy to exclude colorectal cancer (CRC. However, its usefulness has been debated in this era of high-resolution computed tomography (CT diagnosis. We assessed the frequency and outcome of endoscopic follow-up for patients with CT-proven acute diverticulitis, according to the confidence in the CT diagnosis.Methods: Records of patients with CT-proven acute diverticulitis between October 2007 and March 2014 at Sandwell & West Birmingham Hospitals NHS Trust were retrieved. The National Cancer Registry confirmed the cases of CRC. Endoscopy quality indicators were compared between these patients and other patients undergoing the same endoscopic examination over the same period.Results: We identified 235 patients with CT-proven acute diverticulitis, of which, 187 were managed conservatively. The CT report was confident of the diagnosis of acute diverticulitis in 75% cases. Five of the 235 patients were subsequently diagnosed with CRC (2.1%. Three cases of CRC were detected in the 187 patients managed conservatively (1.6%. Forty-eight percent of the conservatively managed patients underwent follow-up endoscopy; one case of CRC was identified. Endoscopies were often incomplete and caused more discomfort for patients with diverticulitis compared with controls.Conclusions: CRC was diagnosed in patients with CT-proven diverticulitis at a higher rate than in screened asymptomatic populations, necessitating follow-up. CT reports contained statements regarding diagnostic uncertainty in 25% cases, associated with an increased risk of CRC. Follow-up endoscopy in patients with CT-proven diverticulitis is associated with increased discomfort and high rates of incompletion. The use of other follow-up modalities should be considered.

The PBase Scientific Workflow Provenance Repository

Directory of Open Access Journals (Sweden)

Víctor Cuevas-Vicenttín

2014-10-01

Full Text Available Scientific workflows and their supporting systems are becoming increasingly popular for compute-intensive and data-intensive scientific experiments. The advantages scientific workflows offer include rapid and easy workflow design, software and data reuse, scalable execution, sharing and collaboration, and other advantages that altogether facilitate “reproducible science”. In this context, provenance – information about the origin, context, derivation, ownership, or history of some artifact – plays a key role, since scientists are interested in examining and auditing the results of scientific experiments. However, in order to perform such analyses on scientific results as part of extended research collaborations, an adequate environment and tools are required. Concretely, the need arises for a repository that will facilitate the sharing of scientific workflows and their associated execution traces in an interoperable manner, also enabling querying and visualization. Furthermore, such functionality should be supported while taking performance and scalability into account. With this purpose in mind, we introduce PBase: a scientific workflow provenance repository implementing the ProvONE proposed standard, which extends the emerging W3C PROV standard for provenance data with workflow specific concepts. PBase is built on the Neo4j graph database, thus offering capabilities such as declarative and efficient querying. Our experiences demonstrate the power gained by supporting various types of queries for provenance data. In addition, PBase is equipped with a user friendly interface tailored for the visualization of scientific workflow provenance data, making the specification of queries and the interpretation of their results easier and more effective.

Mining Tasks from the Web Anchor Text Graph: MSR Notebook Paper for the TREC 2015 Tasks Track

Science.gov (United States)

2015-11-20

Mining Tasks from the Web Anchor Text Graph: MSR Notebook Paper for the TREC 2015 Tasks Track Paul N. Bennett Microsoft Research Redmond, USA pauben...anchor text graph has proven useful in the general realm of query reformulation [2], we sought to quantify the value of extracting key phrases from...anchor text in the broader setting of the task understanding track. Given a query, our approach considers a simple method for identifying a relevant

The fossil record of crocodilian tracks and traces: an overview

DEFF Research Database (Denmark)

Lockley, Martin G.; Lucas, Spencer; Milàn, Jesper

2010-01-01

This volume fills a gap in the ichnological literature on crocodylian tracks and other traces (bite marks and coprolites). The definition of Crocodylia is presently in flux as both crown-based and stem-based definitions are present in the literature. The present volume provides articles focused o...

High-Density Near-Field Optical Disc Recording

Science.gov (United States)

Shinoda, Masataka; Saito, Kimihiro; Ishimoto, Tsutomu; Kondo, Takao; Nakaoki, Ariyoshi; Ide, Naoki; Furuki, Motohiro; Takeda, Minoru; Akiyama, Yuji; Shimouma, Takashi; Yamamoto, Masanobu

2005-05-01

We developed a high-density near-field optical recording disc system using a solid immersion lens. The near-field optical pick-up consists of a solid immersion lens with a numerical aperture of 1.84. The laser wavelength for recording is 405 nm. In order to realize the near-field optical recording disc, we used a phase-change recording media and a molded polycarbonate substrate. A clear eye pattern of 112 GB capacity with 160 nm track pitch and 50 nm bit length was observed. The equivalent areal density is 80.6 Gbit/in2. The bottom bit error rate of 3 tracks-write was 4.5× 10-5. The readout power margin and the recording power margin were ± 30.4% and ± 11.2%, respectively.

Geochemistry of buried river sediments from Ghaggar Plains, NW India: Multi-proxy records of variations in provenance, paleoclimate, and paleovegetation patterns in the Late Quaternary

DEFF Research Database (Denmark)

Singh, Ajit; Paul, Debajyoti; Sinha, Rajiv

2016-01-01

We report the first geochemical record in two drill-sediment cores from a buried channel in the Ghaggar Plains of NW India, which are used to infer variations in provenance, paleoclimate, and paleovegetation in the locality during the Late Quaternary. Aeolian sediments (~150 ka) in both the cores...... are overlain by fluvial sediments (~75 ka-recent). Major oxide compositions of the core sediments (n = 35) generally vary between that observed for the modern-day Ghaggar/Sutlej and Yamuna river sand. The isotopic composition (87Sr/86Sr: 0.7365 to 0.7783 and εNd: -14.6 to -19.0) of core sediments (n = 18......) suggest binary mixing of sediments from compositionally distinct Higher Himalaya (HH) and Lesser Himalaya (LH) endmembers in the catchment, and support involvement of a river system originating in the Himalayan hinterland. Distinctly higher 87Sr/86Sr and lower εNd in the core sediments during glacial...

Model-based Abstraction of Data Provenance

DEFF Research Database (Denmark)

Probst, Christian W.; Hansen, René Rydhof

2014-01-01

to bigger models, and the analyses adapt accordingly. Our approach extends provenance both with the origin of data, the actors and processes involved in the handling of data, and policies applied while doing so. The model and corresponding analyses are based on a formal model of spatial and organisational......Identifying provenance of data provides insights to the origin of data and intermediate results, and has recently gained increased interest due to data-centric applications. In this work we extend a data-centric system view with actors handling the data and policies restricting actions....... This extension is based on provenance analysis performed on system models. System models have been introduced to model and analyse spatial and organisational aspects of organisations, to identify, e.g., potential insider threats. Both the models and analyses are naturally modular; models can be combined...

Detrital thermochronology of Rhine, Elbe and Meuse river sediment (Central Europe): implications for provenance, erosion and mineral fertility

Science.gov (United States)

Glotzbach, C.; Busschers, F. S.; Winsemann, J.

2018-03-01

Here we present detrital apatite fission track (AFT), zircon fission track (ZFT) and a few apatite (U-Th)/He (AHe) data of Middle Pleistocene to modern Rhine, Meuse and Elbe river sediments in order to resolve processes that control detrital age distributions (provenance, erosion and mineral fertility). We used a modelling approach to compare observed with theoretically predicted age distributions from an interpolated in situ AFT and ZFT age map. In situ cooling ages do show large differences in the Rhine drainage basin, facilitating the differentiation between different source regions. Inconsistencies between observed and theoretical age distributions of the Meuse and Elbe samples can be explained by mixing and reworking of sediments with different provenances (Meuse Middle Pleistocene terrace sediment) and a yet unexplored source region with old AFT ages (Elbe samples). Overall, the results show that detrital thermochronology is capable of identifying the provenance of Middle Pleistocene to modern sediments. The AFT age distributions of Rhine sediments are dominated ( 70%) by AFT ages representing the Alps. A possible explanation is higher erosion rates in the Alps as compared to areas outside the Alps. A Late Pleistocene sample from the Upper Rhine Graben contains apatite grains from the Molasse and Hegau volcanics, which we explain with a shift of the headwaters of the Rhine to the north as a result of intense Middle Pleistocene Riss glaciation. Contrary to the observed dominance of Alpine-derived AFT ages in Rhine sediments, the relative contribution of zircon ages with sources in the Alps is lower and significantly decreases downstream, suggesting a major source of zircons outside the Alps. This can be explained by increased zircon fertility of sediments derived from the Rhenish massif. Therefore, we conclude that erosion and mineral fertility are the main processes controlling detrital AFT and ZFT age distributions of the sampled river sediment. In case of

On the Feasibility of Tracking the Monsoon History by Using Ancient Wind Direction Records

Science.gov (United States)

Gallego, D.; Ribera, P.; Peña-Ortiz, C.; Vega, I.; Gómez, F. D. P.; Ordoñez-Perez, P.; Garcia-Hererra, R.

2015-12-01

In this work, we use old wind direction records to reconstruct indices for the West African Monsoon (WAM) and the Indian Summer Monsoon (ISM). Since centuries ago, ships departing from the naval European powers circumnavigated Africa in their route to the Far East. Most of these ships took high-quality observations preserved in logbooks. We show that wind direction observations taken aboard ships can be used to track the seasonal wind reversal typical of monsoonal circulations. The persistence of the SW winds in the 20W-17W and 7N-13N region is highly correlated with the WAM strength and Sahel's precipitation. It has been possible to build a WAM index back to the 19th Century. Our results show that in the Sahel, the second half of the 19thCentury was significantly wetter than present day. The relation of the WAM with the ENSO cycle, and the Atlantic Multidecadal Oscillation was low and instable from the 1840s to the 1970s, when they abruptly suffered an unprecedented reinforcement which last up to the present day. The persistence of the SSW wind in the 60E-80E and 8N-12N area has been used to track the ISM onset since the 1880s. We found evidences of later than average onset dates during the 1900-1925 and 1970-1990 periods and earlier than average onset between 1940 and 1965. A significant relation between the ISM onset and the PDO restricted to shifts from negative to positive PDO phases has been found. The most significant contribution of our study is the fact that we have shown that it is possible to build consistent monsoon indices of instrumental character using solely direct observations of wind direction. Our indices have been generated by using data currently available in the ICOADS 2.5 database, but a large amount of wind observations for periods previous to the 20thcentury still remain not explored in thousands of logbooks preserved in British archives. The interest of unveil these data to track the monsoons for more than 200 -or even 300 years- it is

Persian Records by the Lindström Company: Triangle of Political Relationships, Local Agents and Recording Company

NARCIS (Netherlands)

Mohammadi, M.

2011-01-01

The earliest engagement of German gramophone companies in recording Persian music dates back to 1906-7, when three tracks were recorded for the Beka Company and a dozen recordings were issued on the Globophon label. About twenty years later the Lindström company was engaged in the process of

Solid-state track recorder neutron dosimetry in the Three-Mile Island Unit-2 reactor cavity

International Nuclear Information System (INIS)

Gold, R.; Roberts, J.H.; Ruddy, F.H.; Preston, C.C.; McElroy, W.N.

1985-04-01

Solid-state track recorder (SSTR) neutron dosimetry has been conducted in the Three-Mile Island Unit (TMI-2) reactor cavity (i.e., the annular gap between the pressure vessel and the biological shield) for nondestructive assessment of the fuel distribution. Two axial stringers were deployed in the annular gap with 17 SSTR dosimeters located on each stringer. SSTR experimental results reveal that neutron streaming, upward from the bottom of the reactor cavity region, dominates the observed neutron intensity. These absolute thermal neutron flux observations are consistent with the presence of a significant amount of fuel debris lying at the bottom of the reactor vessel. A conservative lower bound estimated from these SSTR data implies that there are at least 2 tonnes of fuel, which is roughly 4 fuel assemblies, at the bottom of the vessel. The existence of significant neutron streaming also explains the high count rate observed with the source range monitors (SRMs) that are located in the TMI-2 reactor cavity

Coastal DEMs with Cross-Track Interferometry

NARCIS (Netherlands)

Greidanus, H.S.F.; Huising, E.J.; Platschorre, Y.; Bree, R.J.P. van; Halsema, D. van; Vaessen, E.M.J.

1999-01-01

Digital elevation models (DEMs) are produced from airborne radar cross-track interferometric measurements. Radar DEMs recorded from perpendicular orientations are intercompared, and compared to DEMs derived from airborne laser altimetry

Provenance an introduction to PROV

CERN Document Server

Moreau, Luc

2013-01-01

The World Wide Web is now deeply intertwined with our lives, and has become a catalyst for a data deluge, making vast amounts of data available online, at a click of a button. With Web 2.0, users are no longer passive consumers, but active publishers and curators of data. Hence, from science to food manufacturing, from data journalism to personal well-being, from social media to art, there is a strong interest in provenance, a description of what influenced an artifact, a data set, a document, a blog, or any resource on the Web and beyond. Provenance is a crucial piece of information that can

Visualisation methods for large provenance collections in data-intensive collaborative platforms

Science.gov (United States)

Spinuso, Alessandro; Fligueira, Rosa; Atkinson, Malcolm; Gemuend, Andre

2016-04-01

This work investigates improving the methods of visually representing provenance information in the context of modern data-driven scientific research. It explores scenarios where data-intensive workflows systems are serving communities of researchers within collaborative environments, supporting the sharing of data and methods, and offering a variety of computation facilities, including HPC, HTC and Cloud. It focuses on the exploration of big-data visualization techniques aiming at producing comprehensive and interactive views on top of large and heterogeneous provenance data. The same approach is applicable to control-flow and data-flow workflows or to combinations of the two. This flexibility is achieved using the W3C-PROV recommendation as a reference model, especially its workflow oriented profiles such as D-PROV (Messier et al. 2013). Our implementation is based on the provenance records produced by the dispel4py data-intensive processing library (Filgueira et al. 2015). dispel4py is an open-source Python framework for describing abstract stream-based workflows for distributed data-intensive applications, developed during the VERCE project. dispel4py enables scientists to develop their scientific methods and applications on their laptop and then run them at scale on a wide range of e-Infrastructures (Cloud, Cluster, etc.) without making changes. Users can therefore focus on designing their workflows at an abstract level, describing actions, input and output streams, and how they are connected. The dispel4py system then maps these descriptions to the enactment platforms, such as MPI, Storm, multiprocessing. It provides a mechanism which allows users to determine the provenance information to be collected and to analyze it at runtime. For this work we consider alternative visualisation methods for provenance data, from infinite lists and localised interactive graphs, to radial-views. The latter technique has been positively explored in many fields, from text

An Adaptable System to Support Provenance Management for the Public Policy-Making Process in Smart Cities

Directory of Open Access Journals (Sweden)

Barkha Javed

2018-01-01

Full Text Available Government policies aim to address public issues and problems and therefore play a pivotal role in people’s lives. The creation of public policies, however, is complex given the perspective of large and diverse stakeholders’ involvement, considerable human participation, lengthy processes, complex task specification and the non-deterministic nature of the process. The inherent complexities of the policy process impart challenges for designing a computing system that assists in supporting and automating the business process pertaining to policy setup, which also raises concerns for setting up a tracking service in the policy-making environment. A tracking service informs how decisions have been taken during policy creation and can provide useful and intrinsic information regarding the policy process. At present, there exists no computing system that assists in tracking the complete process that has been employed for policy creation. To design such a system, it is important to consider the policy environment challenges; for this a novel network and goal based approach has been framed and is covered in detail in this paper. Furthermore, smart governance objectives that include stakeholders’ participation and citizens’ involvement have been considered. Thus, the proposed approach has been devised by considering smart governance principles and the knowledge environment of policy making where tasks are largely dependent on policy makers’ decisions and on individual policy objectives. Our approach reckons the human dimension for deciding and defining autonomous process activities at run time. Furthermore, with the network-based approach, so-called provenance data tracking is employed which enables the capture of policy process.

Design and Manufacturing of a High-Precision Sun Tracking System Based on Image Processing

Directory of Open Access Journals (Sweden)

Kianoosh Azizi

2013-01-01

Full Text Available Concentration solar arrays require greater solar tracking precision than conventional photovoltaic arrays. This paper presents a high precision low cost dual axis sun tracking system based on image processing for concentration photovoltaic applications. An imaging device is designed according to the principle of pinhole imaging, making sun rays to be received on a screen through pinhole and to be a sun spot. The location of the spot is used to adjust the orientation of the solar panel. A fuzzy logic controller is developed to achieve this goal. A prototype was built, and experimental results have proven the good performance of the proposed system and low error of tracking. The operation of this system is independent of geographical location, initial calibration, and periodical regulations.

The impact of seeds provenance and nursery provenance method on Austrian pine (Pinus nigra Arn. seedlings quality

Directory of Open Access Journals (Sweden)

Vladan Ivetić

2013-12-01

Full Text Available The influence of seed provenances and seedling production methods on quality of one and two years old seedlings of Austrian pine were investigated. Seeds from three provenances of Austrian pine (Goc, Studenica and Sargan were used for seedlings production, combined with three production methods: (i the modified seedbeds (bare-root, (ii the container type Plantagrah II and (iii the container type Gocko. Provenance, as well as the combined influence of provenance and production method had minimal influence on the variability of one and two years old Austrian pine seedlings. Nevertheless, the production method had the highest influence. The production system, besides its importance in nursery, will have a high influence on seedlings growth during the first year after planting. Considering the results of this study (e.g. the highest values of the diameter, number of lateral roots, shoot and root dry weight, and quality index and the lowest value of SQ and satisfactory value of S:R, we can conclude that the seedlings produced in container type Gocko led to the highest seedlings quality, recommended especially for afforestation on hard sites.     

Provenance research: investigation of genetic diversity associated with geography

Science.gov (United States)

Robert Z. Callaham

1963-01-01

Provenance in forestry refers to the population of trees growing at n particular place of origin. Provenance research defines the genetic and environmental components of phenotypic variation associated with geographic source. Information on provenance is important in assuring sources of seed to give well-adapted, productive trees and in directing breeding of...

Provenance Store Evaluation

Energy Technology Data Exchange (ETDEWEB)

Paulson, Patrick R.; Gibson, Tara D.; Schuchardt, Karen L.; Stephan, Eric G.

2008-03-01

Requirements for the provenance store and access API are developed. Existing RDF stores and APIs are evaluated against the requirements and performance benchmarks. The team’s conclusion is to use MySQL as a database backend, with a possible move to Oracle in the near-term future. Both Jena and Sesame’s APIs will be supported, but new code will use the Jena API

Utilizing Provenance in Reusable Research Objects

Directory of Open Access Journals (Sweden)

Zhihao Yuan

2018-03-01

Full Text Available Science is conducted collaboratively, often requiring the sharing of knowledge about computational experiments. When experiments include only datasets, they can be shared using Uniform Resource Identifiers (URIs or Digital Object Identifiers (DOIs. An experiment, however, seldom includes only datasets, but more often includes software, its past execution, provenance, and associated documentation. The Research Object has recently emerged as a comprehensive and systematic method for aggregation and identification of diverse elements of computational experiments. While a necessary method, mere aggregation is not sufficient for the sharing of computational experiments. Other users must be able to easily recompute on these shared research objects. Computational provenance is often the key to enable such reuse. In this paper, we show how reusable research objects can utilize provenance to correctly repeat a previous reference execution, to construct a subset of a research object for partial reuse, and to reuse existing contents of a research object for modified reuse. We describe two methods to summarize provenance that aid in understanding the contents and past executions of a research object. The first method obtains a process-view by collapsing low-level system information, and the second method obtains a summary graph by grouping related nodes and edges with the goal to obtain a graph view similar to application workflow. Through detailed experiments, we show the efficacy and efficiency of our algorithms.

Earthquake prediction research with plastic nuclear track detectors

International Nuclear Information System (INIS)

Woith, H.; Enge, W.; Beaujean, R.; Oschlies, K.

1988-01-01

Since 1984 a German-Turkish project on earthquake prediction research has been operating at the North Anatolian fault zone in Turkey. Among many other parameters changes in Radon emission have also been investigated. Plastic nuclear track detectors (Kodak cellulose nitrate LR 115) are used to record alpha-particles emitted from Radon and Thoron atoms and their daughter isotopes. The detectors are replaced and analyzed every 3 weeks. Thus a quasi-continuous time sequence of the Radon soil gas emission is recorded. We present a comparison between measurements made with electronic counters and plastic track detectors. (author)

Associating uncertainty with datasets using Linked Data and allowing propagation via provenance chains

Science.gov (United States)

Car, Nicholas; Cox, Simon; Fitch, Peter

2015-04-01

With earth-science datasets increasingly being published to enable re-use in projects disassociated from the original data acquisition or generation, there is an urgent need for associated metadata to be connected, in order to guide their application. In particular, provenance traces should support the evaluation of data quality and reliability. However, while standards for describing provenance are emerging (e.g. PROV-O), these do not include the necessary statistical descriptors and confidence assessments. UncertML has a mature conceptual model that may be used to record uncertainty metadata. However, by itself UncertML does not support the representation of uncertainty of multi-part datasets, and provides no direct way of associating the uncertainty information - metadata in relation to a dataset - with dataset objects.We present a method to address both these issues by combining UncertML with PROV-O, and delivering resulting uncertainty-enriched provenance traces through the Linked Data API. UncertProv extends the PROV-O provenance ontology with an RDF formulation of the UncertML conceptual model elements, adds further elements to support uncertainty representation without a conceptual model and the integration of UncertML through links to documents. The Linked ID API provides a systematic way of navigating from dataset objects to their UncertProv metadata and back again. The Linked Data API's 'views' capability enables access to UncertML and non-UncertML uncertainty metadata representations for a dataset. With this approach, it is possible to access and navigate the uncertainty metadata associated with a published dataset using standard semantic web tools, such as SPARQL queries. Where the uncertainty data follows the UncertML model it can be automatically interpreted and may also support automatic uncertainty propagation . Repositories wishing to enable uncertainty propagation for all datasets must ensure that all elements that are associated with uncertainty

Pervasive Electronic Medical Record

African Journals Online (AJOL)

Nafiisah

independent web service connected to database of medical records or Worldwide. Interoperability ... allows wireless monitoring and tracking of patients and first responders using sensor nodes .... All these network security threats arise mainly ...

Neutron dosimetry in the Three-Mile Island Unit 2 reactor cavity with solid-state track recorders

International Nuclear Information System (INIS)

Gold, R.; Roberts, J.H.; Ruddy, F.H.; Preston, C.C.; McElroy, W.N.; Rao, S.V.; Greenborg, J.; Fricke, V.R.

1986-01-01

Solid-state track recorder (SSTR) neutron dosimetry has been conducted in the Three-Mile Island Unit 2 (TMI-2) reactor cavity, for nondestructive assessment of the fuel distribution. Two axial stringers were deployed in the annular gap with 17 SSTR dosimeters located on each stringer. SSTR experimental results reveal that neutron streaming, upward from the bottom of the reactor cavity region, dominates the observed neutron intensity. These absolute thermal neutron flux observations are consistent with the presence of a significant amount of fuel debris lying at the bottom of the reactor vessel. A conservative lower bound estimated from these SSTR data implies that at least 2 tonnes of fuel, which is roughly 4 fuel assemblies, is lying at the bottom of the vessel. This existence of significant neutron streaming also explains the high count rate observed with the source range monitors that are located in the TMI-2 reactor cavity. (author)

A 20 year independent record of sea surface temperature for climate from Along-Track Scanning Radiometers

Science.gov (United States)

Merchant, Christopher J.; Embury, Owen; Rayner, Nick A.; Berry, David I.; Corlett, Gary K.; Lean, Katie; Veal, Karen L.; Kent, Elizabeth C.; Llewellyn-Jones, David T.; Remedios, John J.; Saunders, Roger

2012-12-01

A new record of sea surface temperature (SST) for climate applications is described. This record provides independent corroboration of global variations estimated from SST measurements made in situ. Infrared imagery from Along-Track Scanning Radiometers (ATSRs) is used to create a 20 year time series of SST at 0.1° latitude-longitude resolution, in the ATSR Reprocessing for Climate (ARC) project. A very high degree of independence of in situ measurements is achieved via physics-based techniques. Skin SST and SST estimated for 20 cm depth are provided, with grid cell uncertainty estimates. Comparison with in situ data sets establishes that ARC SSTs generally have bias of order 0.1 K or smaller. The precision of the ARC SSTs is 0.14 K during 2003 to 2009, from three-way error analysis. Over the period 1994 to 2010, ARC SSTs are stable, with better than 95% confidence, to within 0.005 K yr-1(demonstrated for tropical regions). The data set appears useful for cleanly quantifying interannual variability in SST and major SST anomalies. The ARC SST global anomaly time series is compared to the in situ-based Hadley Centre SST data set version 3 (HadSST3). Within known uncertainties in bias adjustments applied to in situ measurements, the independent ARC record and HadSST3 present the same variations in global marine temperature since 1996. Since the in situ observing system evolved significantly in its mix of measurement platforms and techniques over this period, ARC SSTs provide an important corroboration that HadSST3 accurately represents recent variability and change in this essential climate variable.

Mousetrap: An integrated, open-source mouse-tracking package.

Science.gov (United States)

Kieslich, Pascal J; Henninger, Felix

2017-10-01

Mouse-tracking - the analysis of mouse movements in computerized experiments - is becoming increasingly popular in the cognitive sciences. Mouse movements are taken as an indicator of commitment to or conflict between choice options during the decision process. Using mouse-tracking, researchers have gained insight into the temporal development of cognitive processes across a growing number of psychological domains. In the current article, we present software that offers easy and convenient means of recording and analyzing mouse movements in computerized laboratory experiments. In particular, we introduce and demonstrate the mousetrap plugin that adds mouse-tracking to OpenSesame, a popular general-purpose graphical experiment builder. By integrating with this existing experimental software, mousetrap allows for the creation of mouse-tracking studies through a graphical interface, without requiring programming skills. Thus, researchers can benefit from the core features of a validated software package and the many extensions available for it (e.g., the integration with auxiliary hardware such as eye-tracking, or the support of interactive experiments). In addition, the recorded data can be imported directly into the statistical programming language R using the mousetrap package, which greatly facilitates analysis. Mousetrap is cross-platform, open-source and available free of charge from https://github.com/pascalkieslich/mousetrap-os .

Accurately tracking single-cell movement trajectories in microfluidic cell sorting devices.

Science.gov (United States)

Jeong, Jenny; Frohberg, Nicholas J; Zhou, Enlu; Sulchek, Todd; Qiu, Peng

2018-01-01

Microfluidics are routinely used to study cellular properties, including the efficient quantification of single-cell biomechanics and label-free cell sorting based on the biomechanical properties, such as elasticity, viscosity, stiffness, and adhesion. Both quantification and sorting applications require optimal design of the microfluidic devices and mathematical modeling of the interactions between cells, fluid, and the channel of the device. As a first step toward building such a mathematical model, we collected video recordings of cells moving through a ridged microfluidic channel designed to compress and redirect cells according to cell biomechanics. We developed an efficient algorithm that automatically and accurately tracked the cell trajectories in the recordings. We tested the algorithm on recordings of cells with different stiffness, and showed the correlation between cell stiffness and the tracked trajectories. Moreover, the tracking algorithm successfully picked up subtle differences of cell motion when passing through consecutive ridges. The algorithm for accurately tracking cell trajectories paves the way for future efforts of modeling the flow, forces, and dynamics of cell properties in microfluidics applications.

Accurately tracking single-cell movement trajectories in microfluidic cell sorting devices.

Directory of Open Access Journals (Sweden)

Jenny Jeong

Full Text Available Microfluidics are routinely used to study cellular properties, including the efficient quantification of single-cell biomechanics and label-free cell sorting based on the biomechanical properties, such as elasticity, viscosity, stiffness, and adhesion. Both quantification and sorting applications require optimal design of the microfluidic devices and mathematical modeling of the interactions between cells, fluid, and the channel of the device. As a first step toward building such a mathematical model, we collected video recordings of cells moving through a ridged microfluidic channel designed to compress and redirect cells according to cell biomechanics. We developed an efficient algorithm that automatically and accurately tracked the cell trajectories in the recordings. We tested the algorithm on recordings of cells with different stiffness, and showed the correlation between cell stiffness and the tracked trajectories. Moreover, the tracking algorithm successfully picked up subtle differences of cell motion when passing through consecutive ridges. The algorithm for accurately tracking cell trajectories paves the way for future efforts of modeling the flow, forces, and dynamics of cell properties in microfluidics applications.

Small Orbital Stereo Tracking Camera Technology Development

Science.gov (United States)

Gagliano, L.; Bryan, T.; MacLeod, T.

On-Orbit Small Debris Tracking and Characterization is a technical gap in the current National Space Situational Awareness necessary to safeguard orbital assets and crew. This poses a major risk of MOD damage to ISS and Exploration vehicles. In 2015 this technology was added to NASAs Office of Chief Technologist roadmap. For missions flying in or assembled in or staging from LEO, the physical threat to vehicle and crew is needed in order to properly design the proper level of MOD impact shielding and proper mission design restrictions. Need to verify debris flux and size population versus ground RADAR tracking. Use of ISS for In-Situ Orbital Debris Tracking development provides attitude, power, data and orbital access without a dedicated spacecraft or restricted operations on-board a host vehicle as a secondary payload. Sensor Applicable to in-situ measuring orbital debris in flux and population in other orbits or on other vehicles. Could enhance safety on and around ISS. Some technologies extensible to monitoring of extraterrestrial debris as well To help accomplish this, new technologies must be developed quickly. The Small Orbital Stereo Tracking Camera is one such up and coming technology. It consists of flying a pair of intensified megapixel telephoto cameras to evaluate Orbital Debris (OD) monitoring in proximity of International Space Station. It will demonstrate on-orbit optical tracking (in situ) of various sized objects versus ground RADAR tracking and small OD models. The cameras are based on Flight Proven Advanced Video Guidance Sensor pixel to spot algorithms (Orbital Express) and military targeting cameras. And by using twin cameras we can provide Stereo images for ranging & mission redundancy. When pointed into the orbital velocity vector (RAM), objects approaching or near the stereo camera set can be differentiated from the stars moving upward in background.

Provenance-Based Debugging and Drill-Down in Data-Oriented Workflows

KAUST Repository

Ikeda, Robert; Cho, Junsang; Fang, Charlie; Salihoglu, Semih; Torikai, Satoshi; Widom, Jennifer

2012-01-01

Panda (for Provenance and Data) is a system that supports the creation and execution of data-oriented workflows, with automatic provenance generation and built-in provenance tracing operations. Workflows in Panda are arbitrary a cyclic graphs

Didactyl tracks of paravian theropods (Maniraptora from the ?Middle Jurassic of Africa.

Directory of Open Access Journals (Sweden)

Alexander Mudroch

Full Text Available BACKGROUND: A new dinosaur tracksite from ?Middle Jurassic sediments of the Irhazer Group on the plains of Agadez (Rep. Niger, northwest Africa revealed extraordinarily well preserved didactyl tracks of a digitigrade bipedal trackmaker. The distinct morphology of the pes imprints indicates a theropod trackmaker from a paravian maniraptoran closely related to birds. METHODOLOGY/PRINCIPAL FINDINGS: The early age and the morphological traits of the tracks allow for description of the new ichnotaxon Paravipus didactyloides. A total of 120 tracks are assigned to 5 individual trackways. The 'medium-sized' tracks with an average footprint length of 27.5 cm and footprint width of 23.1 cm are deeply imprinted into the track bearing sandstone. CONCLUSIONS/SIGNIFICANCE: A comparison with other didactyl tracks gives new insights into the foot morphology of advanced maniraptoran theropods and contributes to knowledge of their evolutionary history. The new ichnotaxon takes an important position in the ichnological fossil record of Gondwana and the mid-Jurassic biota worldwide, because it is among the earliest known records of paravian maniraptorans and of didactyl theropod tracks from Africa.

Tetrapod tracks in Permo–Triassic eolian beds of southern Brazil (Paraná Basin

Directory of Open Access Journals (Sweden)

Heitor Francischini

2018-05-01

Full Text Available Tetrapod tracks in eolianites are widespread in the fossil record since the late Paleozoic. Among these ichnofaunas, the ichnogenus Chelichnus is the most representative of the Permian tetrapod ichnological record of eolian deposits of Europe, North America and South America, where the Chelichnus Ichnofacies often occurs. In this contribution, we describe five sets of tracks (one of which is preserved in cross-section, representing the first occurrence of Dicynodontipus and Chelichnus in the “Pirambóia Formation” of southern Brazil. This unit represents a humid desert in southwestern Pangea and its lower and upper contacts lead us to consider its age as Lopingian–Induan. The five sets of tracks studied were compared with several ichnotaxa and body fossils with appendicular elements preserved, allowing us to attribute these tracks to dicynodonts and other indeterminate therapsids. Even though the “Pirambóia Formation” track record is sparse and sub-optimally preserved, it is an important key to better understand the occupation of arid environments by tetrapods across the Permo–Triassic boundary.

Proximal patellar tendinosis and abnormalities of patellar tracking

International Nuclear Information System (INIS)

Allen, G.M.; Tauro, P.G.; Ostlere, S.J.

1999-01-01

Objective. To assess whether an association exists between patellar tendinosis and abnormal patellar tracking. Design and patients. The MRI examinations of 630 patients (i.e. 860 knees) referred with anterior knee pain over a 4-year period were assessed in retrospect for the presence of patellar tendinosis and abnormal patellar tracking. The images of the patients with patellar tendinosis were reviewed and the location within the patellar tendon was recorded. Results. There were 44 knees with proximal patellar tendinosis. Twenty-four of these were considered to have normal patellar tracking and 20 to have abnormal patellar tracking. In the group of 816 knees without proximal patellar tendinosis, 581 were considered to have normal patellar tracking and 235 knees to have abnormal patellar tracking. When the two groups were compared there was a statistically significant difference in the ratio of patients with and without abnormal tracking. Conclusion. In patients referred with anterior knee pain or suspected abnormal patellar tracking there is a significant association between proximal patellar tendinosis and abnormal patellar tracking. (orig.)

Automatically processed alpha-track radon monitor

International Nuclear Information System (INIS)

Langner, G.H. Jr.

1993-01-01

An automatically processed alpha-track radon monitor is provided which includes a housing having an aperture allowing radon entry, and a filter that excludes the entry of radon daughters into the housing. A flexible track registration material is located within the housing that records alpha-particle emissions from the decay of radon and radon daughters inside the housing. The flexible track registration material is capable of being spliced such that the registration material from a plurality of monitors can be spliced into a single strip to facilitate automatic processing of the registration material from the plurality of monitors. A process for the automatic counting of radon registered by a radon monitor is also provided

Innocent Until Proven Guilty

Science.gov (United States)

Case, Catherine; Whitaker, Douglas

2016-01-01

In the criminal justice system, defendants accused of a crime are presumed innocent until proven guilty. Statistical inference in any context is built on an analogous principle: The null hypothesis--often a hypothesis of "no difference" or "no effect"--is presumed true unless there is sufficient evidence against it. In this…

Radiation scanning system for data recording media

International Nuclear Information System (INIS)

Gucza, E.

1975-01-01

The scanner of an encoded record support operates by the reflection principle. The record support has tracks brocken down into individual fields which are assigned light-dark markers for encoding purposes.The support consists of a light, non-transparent card which can be pulled over a slot by a guide attached to the scanner. The slot is arranged at an oblique angle relative to the card and emits radiation, for instance, light. This radiation is reflected by the tracks, the empty fields reflecting more radiation than the blackend ones, and then after having been transformed into signals, impinges upon phototransistors through openings. The number of openings corresponds to the number of tracks. The light can be made diffuse prior to exposure of the card by means of a red transparent plastic foil. (DG/RF) [de

Automation system for optical counting of nuclear tracks

Energy Technology Data Exchange (ETDEWEB)

Boulyga, S.F.; Boulyga, E.G.; Lomonosova, E.M.; Zhuk, I.V

1999-06-01

An automation system consisting of the microscope, video camera and Pentium PC with frame recorder was created. The system provides counting of nuclear tracks on the SSNTD surface with a resolution of 752 x 582 points, determination of the surface area and main axis of the track. The pattern recognition program was developed for operation in Windows 3.1 (or higher) ensuring a convenient interface with the user. In a comparison of the results on automatic track counting with the more accurate hand mode it was shown that the program enables the tracks to be detected even on images with a rather high noise level. It ensures a high accuracy of track counting being comparable with the accuracy of manual counting for densities of tracks in the range of up to 2{center_dot}10{sup 5} tracks/cm{sup 2}. The automatic system was applied in the experimental investigation of uranium and transuranium elements.

Automation system for optical counting of nuclear tracks

International Nuclear Information System (INIS)

Boulyga, S.F.; Boulyga, E.G.; Lomonosova, E.M.; Zhuk, I.V.

1999-01-01

An automation system consisting of the microscope, video camera and Pentium PC with frame recorder was created. The system provides counting of nuclear tracks on the SSNTD surface with a resolution of 752 x 582 points, determination of the surface area and main axis of the track. The pattern recognition program was developed for operation in Windows 3.1 (or higher) ensuring a convenient interface with the user. In a comparison of the results on automatic track counting with the more accurate hand mode it was shown that the program enables the tracks to be detected even on images with a rather high noise level. It ensures a high accuracy of track counting being comparable with the accuracy of manual counting for densities of tracks in the range of up to 2·10 5 tracks/cm 2 . The automatic system was applied in the experimental investigation of uranium and transuranium elements

Automation system for optical counting of nuclear tracks

CERN Document Server

Boulyga, S F; Lomonosova, E M; Zhuk, I V

1999-01-01

An automation system consisting of the microscope, video camera and Pentium PC with frame recorder was created. The system provides counting of nuclear tracks on the SSNTD surface with a resolution of 752 x 582 points, determination of the surface area and main axis of the track. The pattern recognition program was developed for operation in Windows 3.1 (or higher) ensuring a convenient interface with the user. In a comparison of the results on automatic track counting with the more accurate hand mode it was shown that the program enables the tracks to be detected even on images with a rather high noise level. It ensures a high accuracy of track counting being comparable with the accuracy of manual counting for densities of tracks in the range of up to 2 centre dot 10 sup 5 tracks/cm sup 2. The automatic system was applied in the experimental investigation of uranium and transuranium elements.

Alignment of the ATLAS Inner Detector Tracking System

CERN Document Server

Lacuesta, V; The ATLAS collaboration

2010-01-01

ATLAS is a multipurpose experiment that records the LHC collisions. To reconstruct trajectories of charged particles produced in these collisions, ATLAS tracking system is equipped with silicon planar sensors and drift‐tube based detectors. They constitute the ATLAS Inner Detector. In order to achieve its scientific goals, the alignment of the ATLAS tracking system requires the determine accurately its almost 36000 degrees of freedom. Thus the demanded precision for the alignment of the silicon sensors is below 10 micrometers. This implies to use a large sample of high momentum and isolated charge particle tracks. The high level trigger selects those tracks online. Then the raw data with the hits information of the triggered tracks is stored in a calibration stream. Tracks from cosmic trigger during empty LHC bunches are also used as input for the alignment. The implementation of the track based alignment within the ATLAS software framework unifies different alignment approaches and allows the alignment of ...

Tracing where and who provenance in Linked Data: A calculus

OpenAIRE

Dezani-Ciancaglini, Mariangiola; Horne, Ross; Sassone, Vladimiro

2012-01-01

Linked Data provides some sensible guidelines for publishing and consuming data on the Web. Data published on the Web has no inherent truth, yet its quality can often be assessed based on its provenance. This work introduces a new approach to provenance for Linked Data. The simplest notion of provenance-viz., a named graph indicating where the data is now-is extended with a richer provenance format. The format reflects the behaviour of processes interacting with Linked Data, tracing where the...

Neutron dosimetry in the Three-Mile Island Unit 2 reactor cavity with solid-state track recorders

International Nuclear Information System (INIS)

Gold, R.; Roberts, J.H.; Ruddy, F.H.; Preston, C.C.; McElroy, W.N.; Rao, S.V.; Greenborg, J.; Fricke, V.R.

1985-01-01

Solid-state track recorder (SSTR) neutron dosimetry has been conducted in the Three-Mile Island Unit 2 (TMI-2) reactor cavity (i.e., the annular gap between the pressure vessel and the biological shield) for nondestructive assessment of the fuel distribution. Two axial stringers were deployed in the annular gap with 17 SSTR dosimeters located on each stringer. SSTR experimental results reveal that neutron streaming, upward from the bottom of the reactor cavity region, dominates the observed neutron intensity. These absolute thermal neutron flux observations are consistent with the presence of a significant amount of fuel debris lying at the bottom of the reactor vessel. A conservative lower bound estimated from these SSTR data implies that at least 2 tonnes of fuel, which is roughly 4 fuel assemblies, is lying at the bottom of the vessel. The existence of significant neutron streaming also explains the high count rate observed with the source range monitors (SRMs) that are located in the TMI-2 reactor cavity

Restful Implementation of Catalogue Service for Geospatial Data Provenance

Science.gov (United States)

Jiang, L. C.; Yue, P.; Lu, X. C.

2013-10-01

Provenance, also known as lineage, is important in understanding the derivation history of data products. Geospatial data provenance helps data consumers to evaluate the quality and reliability of geospatial data. In a service-oriented environment, where data are often consumed or produced by distributed services, provenance could be managed by following the same service-oriented paradigm. The Open Geospatial Consortium (OGC) Catalogue Service for the Web (CSW) is used for the registration and query of geospatial data provenance by extending ebXML Registry Information Model (ebRIM). Recent advance of the REpresentational State Transfer (REST) paradigm has shown great promise for the easy integration of distributed resources. RESTful Web Service aims to provide a standard way for Web clients to communicate with servers based on REST principles. The existing approach for provenance catalogue service could be improved by adopting the RESTful design. This paper presents the design and implementation of a catalogue service for geospatial data provenance following RESTful architecture style. A middleware named REST Converter is added on the top of the legacy catalogue service to support a RESTful style interface. The REST Converter is composed of a resource request dispatcher and six resource handlers. A prototype service is developed to demonstrate the applicability of the approach.

Measurement of magnetic and electric field inhomogenities in a time projection chamber using laser tracks

International Nuclear Information System (INIS)

Benetta, M.; Froberger, J.P.; Lehraus, I.; Mathewson, R.; May, J.; Price, M.; Schlater, D.; Tejessi, W.; Witzeling, W.

1985-01-01

The large time projection chambers (TPC) for particle track measurements have their electric drift field parallel to the magnetic field which is needed for the momentum measurement of the particles. Small field inhomogeneities of the order of epsilon times the main field cause large track distortions (coordinate displacements) of the order of epsilon times the driftlength. It is therefore important for every TPC to know the inhomogeneities very well. Laser rays have proven to be useful to study them. We report here on our experience with a TPC having a maximum drift length of 1.3 m

Challenge of Near-Field Recording beyond 50.4 Gbit/in2

Science.gov (United States)

Kishima, Koichiro; Ichimura, Isao; Saito, Kimihiro; Yamamoto, Kenji; Kuroda, Yuji; Iida, Atsushi; Masuhara, Shin; Osato, Kiyoshi

2002-03-01

The possibility of an areal density over 50 Gbit/in2 was examined in near-field phase-change recording. The disk structure was optimized to maximize readout signals under the land-and-groove recording condition at a tracking pitch of 160 nm. We also evaluated the signal crosstalk from adjacent tracks. Eye diagrams of 50.4 Gbit/in2 areal density were demonstrated using 1.5 \\mathit{NA} optics and a GaN laser diode. The track pitch and linear bit density are 160 nm and 80 nm/bit, respectively. The transmission electron microscope (TEM) micrograph of recorded amorphous marks at an areal density of 50.4 Gbit/in2 is also presented.

Growth and provenance variation of Pinus caribaea var ...

African Journals Online (AJOL)

CAMCORE has visited 33 populations of Pinus caribaea var. hondurensis in Belize, Guatemala, Honduras, El Salvador, Nicaragua, and Quintana Roo, Mexico. Seed collections have been made in 29 provenances from 1, 325 mother trees. A total of 21 provenances and sources of Pinus caribaea var. hondurensis were ...

Understanding and crafting the mix the art of recording

CERN Document Server

Moylan, William

2014-01-01

Understanding and Crafting the Mix, 3rd edition provides the framework to identify, evaluate, and shape your recordings with clear and systematic methods. Featuring numerous exercises, this third edition allows you to develop critical listening and analytical skills to gain greater control over the quality of your recordings.　Sample production sequences and descriptions of the recording engineer's role as composer, conductor, and performer provide you with a clear view of the entire recording process. Dr. William Moylan takes an inside look into a range of iconic popular music, thus offering insights into making meaningful sound judgments during recording. His unique focus on the aesthetic of recording and mixing will allow you to immediately and artfully apply his expertise while at the mixing desk. A companion website features recorded tracks to use in exercises, reference materials, additional examples of mixes and sound qualities, and mixed tracks.

Interoperability Using Lightweight Metadata Standards: Service & Data Casting, OpenSearch, OPM Provenance, and Shared SciFlo Workflows

Science.gov (United States)

Wilson, B. D.; Manipon, G.; Hua, H.; Fetzer, E.

2011-12-01

Under several NASA grants, we are generating multi-sensor merged atmospheric datasets to enable the detection of instrument biases and studies of climate trends over decades of data. For example, under a NASA MEASURES grant we are producing a water vapor climatology from the A-Train instruments, stratified by the Cloudsat cloud classification for each geophysical scene. The generation and proper use of such multi-sensor climate data records (CDR's) requires a high level of openness, transparency, and traceability. To make the datasets self-documenting and provide access to full metadata and traceability, we have implemented a set of capabilities and services using known, interoperable protocols. These protocols include OpenSearch, OPeNDAP, Open Provenance Model, service & data casting technologies using Atom feeds, and REST-callable analysis workflows implemented as SciFlo (XML) documents. We advocate that our approach can serve as a blueprint for how to openly "document and serve" complex, multi-sensor CDR's with full traceability. The capabilities and services provided include: - Discovery of the collections by keyword search, exposed using OpenSearch protocol; - Space/time query across the CDR's granules and all of the input datasets via OpenSearch; - User-level configuration of the production workflows so that scientists can select additional physical variables from the A-Train to add to the next iteration of the merged datasets; - Efficient data merging using on-the-fly OPeNDAP variable slicing & spatial subsetting of data out of input netCDF and HDF files (without moving the entire files); - Self-documenting CDR's published in a highly usable netCDF4 format with groups used to organize the variables, CF-style attributes for each variable, numeric array compression, & links to OPM provenance; - Recording of processing provenance and data lineage into a query-able provenance trail in Open Provenance Model (OPM) format, auto-captured by the workflow engine

Tracking anguillid eels: five decades of telemetry-based research

DEFF Research Database (Denmark)

Beguer-Pon, Melanie; Dodson, Julian J.; Castonguay, Martin

2018-01-01

anguillid species have been tracked in three main geographical locations: Western Europe, the north-eastern part of North America and Australasia. Telemetry has proven to be an effective method for determining patterns of yellow eel movements in continental waters. It has also been used extensively...... satellite tags have provided indications of spawning areas, extensive vertical migrations and initial clues about the orientation mechanisms at sea. Telemetry studies have also revealed apparent evidence of predation by marine mammals and fish at sea, suggesting a significant natural source of mortality...

22 CFR 96.43 - Case tracking, data management, and reporting.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Case tracking, data management, and reporting... Accreditation and Approval Responding to Complaints and Records and Reports Management § 96.43 Case tracking, data management, and reporting. (a) When acting as the primary provider, the agency or person maintains...

Provenance determination of pottery by trace element analysis. Problems, solutions and applications

International Nuclear Information System (INIS)

Mommsen, H.

2001-01-01

Provenance determinations of pottery by chemical analysis is reviewed and shown to work well. Since pottery is produced from a well homogenized clay paste according to a certain recipe, sharp elemental patterns are expected for a series of products having the same origin. To obtain such patterns when forming compositional groups of pottery, a consideration of experimental errors, a correction for dilution and a choice of only stable elements is necessary. The patterns thus obtained will have low probability of overlap with groups of different origin. Examples for well defined groups of German stonewares and of Mycenaean wares from the Peloponnese are recorded. (author)

PARTICLE FILTER BASED VEHICLE TRACKING APPROACH WITH IMPROVED RESAMPLING STAGE

Directory of Open Access Journals (Sweden)

Wei Leong Khong

2014-02-01

Full Text Available Optical sensors based vehicle tracking can be widely implemented in traffic surveillance and flow control. The vast development of video surveillance infrastructure in recent years has drawn the current research focus towards vehicle tracking using high-end and low cost optical sensors. However, tracking vehicles via such sensors could be challenging due to the high probability of changing vehicle appearance and illumination, besides the occlusion and overlapping incidents. Particle filter has been proven as an approach which can overcome nonlinear and non-Gaussian situations caused by cluttered background and occlusion incidents. Unfortunately, conventional particle filter approach encounters particle degeneracy especially during and after the occlusion. Particle filter with sampling important resampling (SIR is an important step to overcome the drawback of particle filter, but SIR faced the problem of sample impoverishment when heavy particles are statistically selected many times. In this work, genetic algorithm has been proposed to be implemented in the particle filter resampling stage, where the estimated position can converge faster to hit the real position of target vehicle under various occlusion incidents. The experimental results show that the improved particle filter with genetic algorithm resampling method manages to increase the tracking accuracy and meanwhile reduce the particle sample size in the resampling stage.

Querying Provenance Information: Basic Notions and an Example from Paleoclimate Reconstruction

Science.gov (United States)

Stodden, V.; Ludaescher, B.; Bocinsky, K.; Kintigh, K.; Kohler, T.; McPhillips, T.; Rush, J.

2016-12-01

Computational models are used to reconstruct and explain past environments and to predict likely future environments. For example, Bocinsky and Kohler have performed a 2,000-year reconstruction of the rain-fed maize agricultural niche in the US Southwest. The resulting academic publications not only contain traditional method descriptions, figures, etc. but also links to code and data for basic transparency and reproducibility. Examples include ResearchCompendia.org and the new project "Merging Science and Cyberinfrastructure Pathways: The Whole Tale." Provenance information provides a further critical element to understand a published study and to possibly extend or challenge the findings of the original authors. We present different notions and uses of provenance information using a computational archaeology example, e.g., the common use of "provenance for others" (for transparency and reproducibility), but also the more elusive but equally important use of "provenance for self". To this end, we distinguish prospective provenance (a.k.a. workflow) from retrospective provenance (a.k.a. data lineage) and show how combinations of both forms of provenance can be used to answer different kinds of important questions about a workflow and its execution. Since many workflows are developed using scripting or special purpose languages such as Python and R, we employ an approach and toolkit called YesWorkflow that brings provenance modeling, capture, and querying into the realm of scripting. YesWorkflow employs the basic W3C PROV standard, as well as the ProvONE extension for sharing and exchanging retrospective and prospective provenance information, respectively. Finally, we argue that the utility of provenance information should be maximized by developing different kinds provenance questions and queries during the early phases of computational workflow design and implementation.

49 CFR 214.321 - Exclusive track occupancy.

Science.gov (United States)

2010-10-01

... printed document directly, by relay through a designated employee, in a data transmission, or by oral... train dispatcher or control operator in charge of the track shall make a written or electronic record of...

Finding dense locations in indoor tracking data

DEFF Research Database (Denmark)

Ahmed, Tanvir; Pedersen, Torben Bach; Lu, Hua

2014-01-01

for semi-constrained indoor movement, and then uses this to map raw tracking records into mapping records representing object entry and exit times in particular locations. Then, an efficient indexing structure, the Dense Location Time Index (DLT-Index) is proposed for indexing the time intervals...... of the mapping table, along with associated construction, query processing, and pruning techniques. The DLT-Index supports very efficient aggregate point queries, interval queries, and dense location queries. A comprehensive experimental study with real data shows that the proposed techniques can efficiently......Finding the dense locations in large indoor spaces is very useful for getting overloaded locations, security, crowd management, indoor navigation, and guidance. Indoor tracking data can be very large and are not readily available for finding dense locations. This paper presents a graph-based model...

Subaru FATS (fault tracking system)

Science.gov (United States)

Winegar, Tom W.; Noumaru, Junichi

2000-07-01

The Subaru Telescope requires a fault tracking system to record the problems and questions that staff experience during their work, and the solutions provided by technical experts to these problems and questions. The system records each fault and routes it to a pre-selected 'solution-provider' for each type of fault. The solution provider analyzes the fault and writes a solution that is routed back to the fault reporter and recorded in a 'knowledge-base' for future reference. The specifications of our fault tracking system were unique. (1) Dual language capacity -- Our staff speak both English and Japanese. Our contractors speak Japanese. (2) Heterogeneous computers -- Our computer workstations are a mixture of SPARCstations, Macintosh and Windows computers. (3) Integration with prime contractors -- Mitsubishi and Fujitsu are primary contractors in the construction of the telescope. In many cases, our 'experts' are our contractors. (4) Operator scheduling -- Our operators spend 50% of their work-month operating the telescope, the other 50% is spent working day shift at the base facility in Hilo, or day shift at the summit. We plan for 8 operators, with a frequent rotation. We need to keep all operators informed on the current status of all faults, no matter the operator's location.

Provenance variation in Eucalyptus camaldulensis Dehnh. in California

Science.gov (United States)

B.M. Emery; F. Thomas Ledig

1987-01-01

In California, the Lake Albacutya provenance of river red gum was clearly superior in volume growth to 22 other provenances collected throughout the range of the species in Australia. It had at least 2.5 times the volume of the plantation mean at 5.5 years, consistent with its performance in other countries with Mediterranean climates like California's. Other...

System and method for improving video recorder performance in a search mode

NARCIS (Netherlands)

2000-01-01

A method and apparatus wherein video images are recorded on a plurality of tracks of a tape such that, for playback in a search mode at a speed, higher than the recording speed the displayed image will consist of a plurality of contiguous parts, some of the parts being read out from tracks each

System and method for improving video recorder performance in a search mode

NARCIS (Netherlands)

1991-01-01

A method and apparatus wherein video images are recorded on a plurality of tracks of a tape such that, for playback in a search mode at a speed higher than the recording speed the displayed image will consist of a plurality of contiguous parts, some of the parts being read out from tracks each

Mineralogy, stratigraphy, and provenance of soil coverbeds in the Kumara district, Westland

International Nuclear Information System (INIS)

Neall, V.E.; Stewart, R.B.; Wallace, R.C.; Williams, M.C.; Mew, G.

2001-01-01

The sand and silt mineralogy of four soils preserved on fluvioglacial outwash terraces at Kumara indicates that the main soil body is developed in up to 1 m of loessial coverbeds that accumulated subsequent to cessation of gravel terrace formation. Oxygen isotope abundances of the dominant mineral quartz in these soils show a higher temperature origin for the >250 micro-m fraction, consistent with derivation from local granodiorites. Finer quartz is of a mixed provenance origin consistent with the variety of rock types in the region. The finest quartz, <5 micro-m, of aerosolic origin, can be used as a proxy time record for the coverbed accumulations. The widespread 22 590 yr BP Aokautere Ash chronohorizon is preserved in three of the profiles, whilst wind redeposition of the glass shards is responsible for traces of rhyolitic glass in all subsequent horizons. Widespread landscape erosion is postulated either immediately before or during deposition of the K-1 terrace, so that similar subsequent coverbed sequences ae preserved on the K-1 and all older terraces in this district. Magnetic mineral assemblages in the profiles indicate a slightly different loessial provenance for the Cockeye, K-1, and K-2.1 profiles, but the K-2.2 is significantly different from the rest. This is probably a function of aeolian winnowing and variablity of source materials. In the past, different mountain catchments have connected with different lower river reaches, due to transcurrent movement on the Alpine Fault. This is interpreted as having led to changing provenance of river sediment supplying loess to local soils. (author). 39 refs.,10 figs., 4 tabs

The track nanotechnology

International Nuclear Information System (INIS)

Waheed, A.; Forsyth, D.; Watts, A.; Saad, A.F.; Mitchell, G.R.; Farmer, M.; Harris, P.J.F.

2009-01-01

The discipline now called Solid State Nuclear Track Detection (SSNTD) dates back to 1958 and has its roots in the United Kingdom. Its strength stems chiefly from factors such as its simplicity, small geometry, permanent maintenance of the nuclear record and other diversified applications. A very important field with exciting applications reported recently in conjuction with the nuclear track technique is nanotechnology, which has applications in biology, chemistry, industry, medicare and health, information technology, biotechnology, and metallurgical and chemical technologies. Nanotechnology requires material design followed by the study of the quantum effects for final produced applications in sensors, medical diagnosis, information technology to name a few. We, in this article, present a review of past and present applications of SSNTD suggesting ways to apply the technique in nanotechnology, with special reference to development of nanostructure for applications utilising nanowires, nanofilters and sensors.

The track nanotechnology

Energy Technology Data Exchange (ETDEWEB)

Waheed, A. [British Institute of Technology and E-Commerce, London E7 9HZ (United Kingdom); Physics Department, University of Reading, Reading RG6 6AF (United Kingdom); Forsyth, D., E-mail: dforsyth@bite.ac.u [British Institute of Technology and E-Commerce, London E7 9HZ (United Kingdom); Watts, A. [Department of Physics, UCL, London Centre of Nanotechnology (LCN), 17-19 Gordon Street, London WC1H OAH (United Kingdom); Saad, A.F. [Physics Department, Faculty of Science, Garyounis University, Benghazi (Libyan Arab Jamahiriya); Mitchell, G.R. [British Institute of Technology and E-Commerce, London E7 9HZ (United Kingdom); Physics Department, University of Reading, Reading RG6 6AF (United Kingdom); Farmer, M. [British Institute of Technology and E-Commerce, London E7 9HZ (United Kingdom); Harris, P.J.F. [Physics Department, University of Reading, Reading RG6 6AF (United Kingdom)

2009-10-15

The discipline now called Solid State Nuclear Track Detection (SSNTD) dates back to 1958 and has its roots in the United Kingdom. Its strength stems chiefly from factors such as its simplicity, small geometry, permanent maintenance of the nuclear record and other diversified applications. A very important field with exciting applications reported recently in conjuction with the nuclear track technique is nanotechnology, which has applications in biology, chemistry, industry, medicare and health, information technology, biotechnology, and metallurgical and chemical technologies. Nanotechnology requires material design followed by the study of the quantum effects for final produced applications in sensors, medical diagnosis, information technology to name a few. We, in this article, present a review of past and present applications of SSNTD suggesting ways to apply the technique in nanotechnology, with special reference to development of nanostructure for applications utilising nanowires, nanofilters and sensors.

Ensuring the Quality of Data Packages in the LTER Network Provenance Aware Synthesis Tracking Architecture Data Management System and Archive

Science.gov (United States)

Servilla, M. S.; O'Brien, M.; Costa, D.

2013-12-01

Considerable ecological research performed today occurs through the analysis of data downloaded from various repositories and archives, often resulting in derived or synthetic products generated by automated workflows. These data are only meaningful for research if they are well documented by metadata, lest semantic or data type errors may occur in interpretation or processing. The Long Term Ecological Research (LTER) Network now screens all data packages entering its long-term archive to ensure that each package contains metadata that is complete, of high quality, and accurately describes the structure of its associated data entity and the data are structurally congruent to the metadata. Screening occurs prior to the upload of a data package into the Provenance Aware Synthesis Tracking Architecture (PASTA) data management system through a series of quality checks, thus preventing ambiguously or incorrectly documented data packages from entering the system. The quality checks within PASTA are designed to work specifically with the Ecological Metadata Language (EML), the metadata standard adopted by the LTER Network to describe data generated by their 26 research sites. Each quality check is codified in Java as part of the ecological community-supported Data Manager Library, which is a resource of the EML specification and used as a component of the PASTA software stack. Quality checks test for metadata quality, data integrity, or metadata-data congruence. Quality checks are further classified as either conditional or informational. Conditional checks issue a 'valid', 'warning' or 'error' response. Only an 'error' response blocks the data package from upload into PASTA. Informational checks only provide descriptive content pertaining to a particular facet of the data package. Quality checks are designed by a group of LTER information managers and reviewed by the LTER community before deploying into PASTA. A total of 32 quality checks have been deployed to date

Growth and Survival Variation among Scots Pine (Pinus sylvestris L. Provenances

Directory of Open Access Journals (Sweden)

Süleyman Gülcü

2017-01-01

Full Text Available Tree height, basal diameter, and survival were examined in thirteen-year-old provenance test established by 30 seed sources of Scots pine (Pinus sylvestris L. at two exotic sites of the species in Southern part of Turkey. Variations within provenance and among provenances and relations among the traits were estimated to compare Scots pine provenance and two other native species. Averages of tree height and basal diameter were 350 cm and 52.7 mm in Aydogmus site and 385 cm and 51.2 mm in Kemer site, respectively. There were large differences within and among provenances for the characters. Sites were similar (p>0.05 for the characters, while there were significant differences (p≤0.05 among provenances within site according to results of variance analysis (ANOVA. Scots pine provenances were higher and had more thickness than that of black pine (Pinus nigra Arnold and Taurus cedar (Cedrus libani A. Rich. which were natural species of the region. There were positive and significant (p<0.05 correlations between height and basal diameter in the species. Average survivals were 56% and 35% of the provenances in the sites. They were 71% and 11% in black pine and 53% in Taurus cedar for the sites respectively.

49 CFR 237.155 - Documents and records.

Science.gov (United States)

2010-10-01

..., DEPARTMENT OF TRANSPORTATION BRIDGE SAFETY STANDARDS Documentation, Records, and Audits of Bridge Management Programs § 237.155 Documents and records. Each track owner required to implement a bridge management... protected by a security system that incorporates a user identity and password, or a comparable method, to...

40 CFR 73.34 - Recordation in accounts.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Recordation in accounts. 73.34 Section 73.34 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) SULFUR DIOXIDE ALLOWANCE SYSTEM Allowance Tracking System § 73.34 Recordation in accounts. (a) After a...

Global Radiological Source Sorting, Tracking, and Monitoring Project: Phase I Final Report

International Nuclear Information System (INIS)

Walker, Randy M.; Hill, David E.; Gorman, Bryan L.

2010-01-01

As a proof of concept tested in an operational context, the Global Radiological Source Sorting, Tracking, and Monitoring (GRadSSTraM) Project successfully demonstrated that radio frequency identification (RFID) and Web 2.0* technologies can be deployed to track controlled shipments between the United States and the European Union. Between November 2009 and May 2010, a total of 19 shipments were successfully shipped from Oak Ridge National Laboratory (ORNL) by the U.S. Postal Service (USPS) and tracked to their delivery at England's National Physical Laboratory (NPL) by the United Kingdom Royal Mail. However, the project can only be viewed as a qualified success as notable shortcomings were observed. Although the origin and terminus of all RFID-enabled shipments were recorded and no shipments were lost, not all the waypoints between ORNL and NPL were incorporated into the pilot. Given limited resources, the project team was able to install RFID listeners/actuators at three waypoints between the two endpoints. Although it is likely that all shipments followed the same route between ORNL and NPL, it cannot be determined beyond question that all 19 shipments were routed on identical itineraries past the same three waypoints. The pilot also raises the distinct possibility that unattended RFID tracking alone, without positive confirmation that a tagged item has been properly recorded by an RFID reader, does not meet a rigorous standard for shipping controlled items. Indeed, the proof of concept test strongly suggests that a multifaceted approach to tracking may be called for, including tracking methods that are capable of reading and accepting multiple inputs for individual items (e.g., carrier-provided tracking numbers, Universal Product Codes (UPCs), and RFID tags). For controlled items, another apparent requirement is a confirmation feature, human or otherwise, which can certify that an item's RFID tag, UPC, or tracking number has been recorded.

Preparation of fluoropolymer-based ion-track membranes. Structure of latent tracks and pretreatment effect

International Nuclear Information System (INIS)

Yamaki, Tetsuya; Nuryanthi, Nuryanthi; Koshikawa, Hiroshi; Sawada, Shinichi; Hakoda, Teruyuki; Hasegawa, Shin; Asano, Masaharu; Maekawa, Yasunari

2012-01-01

High-energy heavy-ion induced damage, called latent tracks m organic polymers can sometimes be etched out chemically to give submicro- and nano-sized pores. Our focus is placed on ion-track membranes of poly(vinylidene fluoride) (PVDF), a type of fluoropolymer, which were previously considered as a matrix of polymer electrolyte fuel-cell membranes. There have been no optimized methods of preparing the PVDF-based ion-track membranes. We thus examined chemical structures of the defects created in the track, and accordingly, presented a pretreatment technique for achieving more efficient track etching. A 25 μm-thick PVDF film was bombarded with 1.1 GeV 238 U or 450 MeV 129 Xe ions. In the multi-purpose chamber, degradation processes were monitored in-situ by FT-IR spectroscopy and residual gas analysis as a function of the fluence up to 6.0 x 10 11 ions/cm 2 . The films irradiated at 8 ions/cm 2 were etched in a 9 M KOH aqueous solution at 80degC. We also performed the conductometric etching, which allows monitoring of pore evolution versus etching time by recording the electrical conductance through the membrane. At fluences above 1 x 10 10 ions/cm 2 , the film showed two new absorption bands identified as double-bond stretching vibrations of in-chain unsaturations -CH=CF- and fluorinated vinyl groups -CF 2 CH=CF 2 . These defects would result from the evolution of HF. The knowledge of the solubility in a permanganate alkaline solution and our preliminary experiment suggested the importance of oxidized tracks for the easy introduction of the etching agent. We finally found that the pretreatment with ozone could oxidize the double bonds in the tracks, thereby vigorously promoting track etching before breakthrough. (author)

A practical approach to tramway track condition monitoring: vertical track defects detection and identification using time-frequency processing technique

Directory of Open Access Journals (Sweden)

Bocz Péter

2018-03-01

Full Text Available This paper presents an automatic method for detecting vertical track irregularities on tramway operation using acceleration measurements on trams. For monitoring of tramway tracks, an unconventional measurement setup is developed, which records the data of 3-axes wireless accelerometers mounted on wheel discs. Accelerations are processed to obtain the vertical track irregularities to determine whether the track needs to be repaired. The automatic detection algorithm is based on time–frequency distribution analysis and determines the defect locations. Admissible limits (thresholds are given for detecting moderate and severe defects using statistical analysis. The method was validated on frequented tram lines in Budapest and accurately detected severe defects with a hit rate of 100%, with no false alarms. The methodology is also sensitive to moderate and small rail surface defects at the low operational speed.

DataONE: A Data Federation with Provenance Support

Energy Technology Data Exchange (ETDEWEB)

Cao, Yang [University of Illinois at Urbana-Champaign; Jones, Christopher [National Center for Ecological Analysis and Synthesis, Santa Barbara; Cuevas-Vicenttin, Victor [ Universidad Popular Autónoma del Estado de Puebla, Puebla, Mexico; Jones, Matthew B. [National Center for Ecological Analysis and Synthesis, Santa Barbara; Ludascher, Bertram [University of Illinois at Urbana-Champaign; McPhillips, Timothy [University of Illinois at Urbana-Champaign; Missier, Paolo [Newcastle University, UK; Schwalm, Christopher [Woods Hole Research Center (WHRC), Massachusetts; Slaughter, Peter [National Center for Ecological Analysis and Synthesis, Santa Barbara; Vieglais, Dave [University of Kansas; Walker, Lauren [National Center for Ecological Analysis and Synthesis, Santa Barbara

2016-01-01

DataONE is a federated data network focusing on earth and environmental science data. We present the provenance and search features of DataONE by means of an example involving three earth scientists who interact through a DataONE Member Node. DataONE provenance systems enable reproducible research and facilitate proper attribution of scientific results transitively across generations of derived data products.

Linking Health Records for Federated Query Processing

Directory of Open Access Journals (Sweden)

Dewri Rinku

2016-07-01

Full Text Available A federated query portal in an electronic health record infrastructure enables large epidemiology studies by combining data from geographically dispersed medical institutions. However, an individual’s health record has been found to be distributed across multiple carrier databases in local settings. Privacy regulations may prohibit a data source from revealing clear text identifiers, thereby making it non-trivial for a query aggregator to determine which records correspond to the same underlying individual. In this paper, we explore this problem of privately detecting and tracking the health records of an individual in a distributed infrastructure. We begin with a secure set intersection protocol based on commutative encryption, and show how to make it practical on comparison spaces as large as 1010 pairs. Using bigram matching, precomputed tables, and data parallelism, we successfully reduced the execution time to a matter of minutes, while retaining a high degree of accuracy even in records with data entry errors. We also propose techniques to prevent the inference of identifier information when knowledge of underlying data distributions is known to an adversary. Finally, we discuss how records can be tracked utilizing the detection results during query processing.

High-throughput phenotyping of plant resistance to aphids by automated video tracking.

Science.gov (United States)

Kloth, Karen J; Ten Broeke, Cindy Jm; Thoen, Manus Pm; Hanhart-van den Brink, Marianne; Wiegers, Gerrie L; Krips, Olga E; Noldus, Lucas Pjj; Dicke, Marcel; Jongsma, Maarten A

2015-01-01

Piercing-sucking insects are major vectors of plant viruses causing significant yield losses in crops. Functional genomics of plant resistance to these insects would greatly benefit from the availability of high-throughput, quantitative phenotyping methods. We have developed an automated video tracking platform that quantifies aphid feeding behaviour on leaf discs to assess the level of plant resistance. Through the analysis of aphid movement, the start and duration of plant penetrations by aphids were estimated. As a case study, video tracking confirmed the near-complete resistance of lettuce cultivar 'Corbana' against Nasonovia ribisnigri (Mosely), biotype Nr:0, and revealed quantitative resistance in Arabidopsis accession Co-2 against Myzus persicae (Sulzer). The video tracking platform was benchmarked against Electrical Penetration Graph (EPG) recordings and aphid population development assays. The use of leaf discs instead of intact plants reduced the intensity of the resistance effect in video tracking, but sufficiently replicated experiments resulted in similar conclusions as EPG recordings and aphid population assays. One video tracking platform could screen 100 samples in parallel. Automated video tracking can be used to screen large plant populations for resistance to aphids and other piercing-sucking insects.

Commodity movement tracking (CMT) : bridging operations and commercial transactions

International Nuclear Information System (INIS)

Lewyta, M.

2004-01-01

Enbridge Pipelines Inc. (EPI) operates a network of interconnected pipelines that facilitate the transport of liquid fuels across North America, with operations centralized in Edmonton, Alberta. This paper addressed the issue of accurately tracking the location of commodities transported on EPI pipelines for billing and payment purposes. The role of integrated information systems in meeting the need for high quality information by customers and by EPI was also addressed. The paper presented the Commodity Movement Tracking (CMT) system that is central to achieving the desired accuracy of commercial and financial transactions. CMT tracks inventories and links products to commercial transactions across the pipeline. Batches are tracked from initial receipt to final delivery, incorporating CMT's operational checks and balances, reconciliation steps, process monitoring, and supervisory control and data acquisition (SCADA) systems data that contribute to inputs equaling outputs. Daily schedules are recorded into the CMT system as events, based on volumetric information derived from the SCADA system. Receipt and delivery events will be electronically recorded into CMT from field flow computers in the near future. CMT modeling considers changes within the line configuration, static pipe diameter changes, as well as packing and draining of the line fill resulting from pressure changes. This paper described the major functional activities of the overall business process, such as nominations, scheduling, commodity movement tracking, leak detection, electronic ticketing, SCADA, and oil accounting. 10 figs.

Lab and Field Warming Similarly Advance Germination Date and Limit Germination Rate for High and Low Elevation Provenances of Two Widespread Subalpine Conifers

Directory of Open Access Journals (Sweden)

Lara M. Kueppers

2017-11-01

Full Text Available Accurately predicting upslope shifts in subalpine tree ranges with warming requires understanding how future forest populations will be affected by climate change, as these are the seed sources for new tree line and alpine populations. Early life history stages are particularly sensitive to climate and are also influenced by genetic variation among populations. We tested the climate sensitivity of germination and initial development for two widely distributed subalpine conifers, using controlled-environment growth chambers with one temperature regime from subalpine forest in the Colorado Rocky Mountains and one 5 °C warmer, and two soil moisture levels. We tracked germination rate and timing, rate of seedling development, and seedling morphology for two seed provenances separated by ~300 m elevation. Warming advanced germination timing and initial seedling development by a total of ~2 weeks, advances comparable to mean differences between provenances. Advances were similar for both provenances and species; however, warming reduced the overall germination rate, as did low soil moisture, only for Picea engelmannii. A three-year field warming and watering experiment planted with the same species and provenances yielded responses qualitatively consistent with the lab trials. Together these experiments indicate that in a warmer, drier climate, P. engelmannii germination, and thus regeneration, could decline, which could lead to declining subalpine forest populations, while Pinus flexilis forest populations could remain robust as a seed source for upslope range shifts.

High-resolution recording of particle tracks with in-line holography in a large cryogenic bubble chamber

CERN Document Server

Harigel, G G

2000-01-01

Holography has been used successfully in combination with conventional optics for the first time in a large cryogenic bubble chamber, the 15-Foot Bubble Chamber at the Fermi National Accelerator Laboratory (FNAL), during a physics run in a high-energy neutrino beam. The innovative system combined the reference beam with the object beam, irradiating a conical volume of ~1.5 m/sup 3/. Bubble tracks from neutrino interactions with a width of ~120 mu m have been recorded with good contrast. The ratio of intensities of the object light to the reference light striking the film is called the beam branching ratio (BBR). We obtained in our experiment an exceedingly small minimum-observable ratio of BBR=(0.54/0.21)*10/sup -7/. The technology has the potential for a wide range of applications. This paper describes the various difficulties in achieving the success. It required the development of laser pulse stretching via enhanced closed loop control with slow Q-switching, to overcome excessive heating of the cryogenic l...

77 FR 37443 - Records Schedules; Availability and Request for Comments

Science.gov (United States)

2012-06-21

... an electronic information system used to track review action assignments and customer satisfaction... disposal or reduce the retention period of records already authorized for disposal. NARA invites public... accumulation, agency records managers prepare schedules proposing retention periods for records and submit...

Liquid nitrogen enhancement of alpha particle tracks in a polycarbonate detector

International Nuclear Information System (INIS)

Pilione, L.J.

1977-01-01

Makrofol-E polycarbonate detectors were exposed to 1 to 3 MeV alpha particles and subsequently immersed in liquid nitrogen for various periods of time. The influence of the liquid nitrogen on the track recording properties of the detector has been found by measuring the track densities and diameters. Track densities increase with immersion time with a maximum gain of approximately 9% after 1200 min in liquid nitrogen. Track enhancement decreases with waiting time between the end of alpha particle exposure and the beginning of liquid nitrogen immersion. Track diameters decrease with time after passage of the particles and this process is accelerated by immersion in liquid nitrogen. (author)

Identification of the source of manufacture of obsidian through the dating with the method of fission track

International Nuclear Information System (INIS)

Arias, C.; Bigazzi, G.; Bonadonna, F.P.; Radi, G.; Bernardes, C.; Hadler Neto, J.C.; Lattes, C.M.G.; Araya, A.M.O.; Oliveira, J.X.

1986-01-01

Identification of the source of manufacture of obsidian through the dating with the method of fission track. After a brief description of fission track dating method and of the problems related to its application to volcanic glasses, we show and discuss data about obsidians of geological origin from Mediterranean basin and Latin America and of archaeological origin found in prehistoric sites from Italian peninsula. The analysis of the results shows the excellent performance of fission track method to identify the provenance of obsidians of archaeological origin, provided important constributions both from the methodological pointo of view-excellent agreement between the two correction techniques of apparent ages, size-correction technique and plateau age -, as from the archaeological point of view - we could identify four possible sources of provenance in Italy, the obsidian from Monte Arci, Sardinia, the obsidian from Pahnarola island, the obsidian from Gabelloto, Lipari island and the obsidian from Balata dei Turchi, Pantelleria island; and it ca be shown that Lipari obsidian began to be used at a very antique phase of neolithic period. The data about Latin American samples, though fragmented, constitute in an inicial study promissing perpectives as it can be observed by the comparisions made with the data published by others authors about geologic and archaeologic samples from the same area. (Author) [pt

Fission track dating of kimberlitic zircons

International Nuclear Information System (INIS)

Haggerty, S.E.

1983-01-01

The only reliable method for dating kimberlites at present is the lengthy and specialized hydrothermal procedure that extracts 206 Pb and 238 U from low-uranium zircons. This paper describes a second successful method by fission track dating of large single-crystal zircons, 1.0-1.5 cm in dimension. The use of large crystals overcomes the limitations imposed in conventional fission track analysis which utilizes crushed fragments. Low track densities, optical track dispersion, and the random orientation of polished surfaces in the etch and irradiation cycle are effectively overcome. Fission track ages of zircons from five African kimberlites are reported, from the Kimberley Pool (90.0 +- 6.5 m.y.), Orapa (87.4 +- 5.7 and 92.4 +- 6.1 m.y.), Nzega (51.1 +- 3.8 m.y.), Koffiefontein (90.9 +- 8.2 m.y.), and Val do Queve (133.4 +- 11.5 m.y.). In addition we report the first radiometric ages (707.9 +- 59.6 and 705.5 +- 61.0 m.y.) of crustal zircons from kimberlites in northwest Liberia. The fission track ages agree well with earlier age estimates. Most of the zircons examined in this study are zoned with respect to uranium but linear correlations are established (by regression analysis) between zones of variable uranium content, and within zones of constant uranium content (by analysis of variance). Concordance between the fission track method and the U/Pb technique is established and we concluded that track fading from thermal annealing has not taken place. Kimberlitic zircons dated in this study, therefore, record the time of eruption. (orig.)

Evaluation of an image-based tracking workflow with Kalman filtering for automatic image plane alignment in interventional MRI.

Science.gov (United States)

Neumann, M; Cuvillon, L; Breton, E; de Matheli, M

2013-01-01

Recently, a workflow for magnetic resonance (MR) image plane alignment based on tracking in real-time MR images was introduced. The workflow is based on a tracking device composed of 2 resonant micro-coils and a passive marker, and allows for tracking of the passive marker in clinical real-time images and automatic (re-)initialization using the microcoils. As the Kalman filter has proven its benefit as an estimator and predictor, it is well suited for use in tracking applications. In this paper, a Kalman filter is integrated in the previously developed workflow in order to predict position and orientation of the tracking device. Measurement noise covariances of the Kalman filter are dynamically changed in order to take into account that, according to the image plane orientation, only a subset of the 3D pose components is available. The improved tracking performance of the Kalman extended workflow could be quantified in simulation results. Also, a first experiment in the MRI scanner was performed but without quantitative results yet.

Adaptive H∞ nonlinear velocity tracking using RBFNN for linear DC brushless motor

Science.gov (United States)

Tsai, Ching-Chih; Chan, Cheng-Kain; Li, Yi Yu

2012-01-01

This article presents an adaptive H ∞ nonlinear velocity control for a linear DC brushless motor. A simplified model of this motor with friction is briefly recalled. The friction dynamics is described by the Lu Gre model and the online tuning radial basis function neural network (RBFNN) is used to parameterise the nonlinear friction function and un-modelled errors. An adaptive nonlinear H ∞ control method is then proposed to achieve velocity tracking, by assuming that the upper bounds of the ripple force, the changeable load and the nonlinear friction can be learned by the RBFNN. The closed-loop system is proven to be uniformly bounded using the Lyapunov stability theory. The feasibility and the efficacy of the proposed control are exemplified by conducting two velocity tracking experiments.

Visual attention is required for multiple object tracking.

Science.gov (United States)

Tran, Annie; Hoffman, James E

2016-12-01

In the multiple object tracking task, participants attempt to keep track of a moving set of target objects embedded in an identical set of moving distractors. Depending on several display parameters, observers are usually only able to accurately track 3 to 4 objects. Various proposals attribute this limit to a fixed number of discrete indexes (Pylyshyn, 1989), limits in visual attention (Cavanagh & Alvarez, 2005), or "architectural limits" in visual cortical areas (Franconeri, 2013). The present set of experiments examined the specific role of visual attention in tracking using a dual-task methodology in which participants tracked objects while identifying letter probes appearing on the tracked objects and distractors. As predicted by the visual attention model, probe identification was faster and/or more accurate when probes appeared on tracked objects. This was the case even when probes were more than twice as likely to appear on distractors suggesting that some minimum amount of attention is required to maintain accurate tracking performance. When the need to protect tracking accuracy was relaxed, participants were able to allocate more attention to distractors when probes were likely to appear there but only at the expense of large reductions in tracking accuracy. A final experiment showed that people attend to tracked objects even when letters appearing on them are task-irrelevant, suggesting that allocation of attention to tracked objects is an obligatory process. These results support the claim that visual attention is required for tracking objects. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

21 CFR 821.25 - Device tracking system and content requirements: manufacturer requirements.

Science.gov (United States)

2010-04-01

... HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES MEDICAL DEVICE TRACKING REQUIREMENTS Tracking... procedure for the collection, maintenance, and auditing of the data specified in paragraphs (a) and (b) of... recording system, and the file maintenance procedures system; and (3) A quality assurance program that...

A Spatiotemporal Database to Track Human Scrub Typhus Using the VectorMap Application.

Directory of Open Access Journals (Sweden)

Daryl J Kelly

2015-12-01

Full Text Available Scrub typhus is a potentially fatal mite-borne febrile illness, primarily of the Asia-Pacific Rim. With an endemic area greater than 13 million km2 and millions of people at risk, scrub typhus remains an underreported, often misdiagnosed febrile illness. A comprehensive, updatable map of the true distribution of cases has been lacking, and therefore the true risk of disease within the very large endemic area remains unknown. The purpose of this study was to establish a database and map to track human scrub typhus. An online search using PubMed and the United States Armed Forces Pest Management Board Literature Retrieval System was performed to identify articles describing human scrub typhus cases both within and outside the traditionally accepted endemic regions. Using World Health Organization guidelines, stringent criteria were used to establish diagnoses for inclusion in the database. The preliminary screening of 181 scrub typhus publications yielded 145 publications that met the case criterion, 267 case records, and 13 serosurvey records that could be georeferenced, describing 13,739 probable or confirmed human cases in 28 countries. A map service has been established within VectorMap (www.vectormap.org to explore the role that relative location of vectors, hosts, and the pathogen play in the transmission of mite-borne scrub typhus. The online display of scrub typhus cases in VectorMap illustrates their presence and provides an up-to-date geographic distribution of proven scrub typhus cases.

A Spatiotemporal Database to Track Human Scrub Typhus Using the VectorMap Application.

Science.gov (United States)

Kelly, Daryl J; Foley, Desmond H; Richards, Allen L

2015-12-01

Scrub typhus is a potentially fatal mite-borne febrile illness, primarily of the Asia-Pacific Rim. With an endemic area greater than 13 million km2 and millions of people at risk, scrub typhus remains an underreported, often misdiagnosed febrile illness. A comprehensive, updatable map of the true distribution of cases has been lacking, and therefore the true risk of disease within the very large endemic area remains unknown. The purpose of this study was to establish a database and map to track human scrub typhus. An online search using PubMed and the United States Armed Forces Pest Management Board Literature Retrieval System was performed to identify articles describing human scrub typhus cases both within and outside the traditionally accepted endemic regions. Using World Health Organization guidelines, stringent criteria were used to establish diagnoses for inclusion in the database. The preliminary screening of 181 scrub typhus publications yielded 145 publications that met the case criterion, 267 case records, and 13 serosurvey records that could be georeferenced, describing 13,739 probable or confirmed human cases in 28 countries. A map service has been established within VectorMap (www.vectormap.org) to explore the role that relative location of vectors, hosts, and the pathogen play in the transmission of mite-borne scrub typhus. The online display of scrub typhus cases in VectorMap illustrates their presence and provides an up-to-date geographic distribution of proven scrub typhus cases.

Automatically tracking neurons in a moving and deforming brain.

Directory of Open Access Journals (Sweden)

Jeffrey P Nguyen

2017-05-01

Full Text Available Advances in optical neuroimaging techniques now allow neural activity to be recorded with cellular resolution in awake and behaving animals. Brain motion in these recordings pose a unique challenge. The location of individual neurons must be tracked in 3D over time to accurately extract single neuron activity traces. Recordings from small invertebrates like C. elegans are especially challenging because they undergo very large brain motion and deformation during animal movement. Here we present an automated computer vision pipeline to reliably track populations of neurons with single neuron resolution in the brain of a freely moving C. elegans undergoing large motion and deformation. 3D volumetric fluorescent images of the animal's brain are straightened, aligned and registered, and the locations of neurons in the images are found via segmentation. Each neuron is then assigned an identity using a new time-independent machine-learning approach we call Neuron Registration Vector Encoding. In this approach, non-rigid point-set registration is used to match each segmented neuron in each volume with a set of reference volumes taken from throughout the recording. The way each neuron matches with the references defines a feature vector which is clustered to assign an identity to each neuron in each volume. Finally, thin-plate spline interpolation is used to correct errors in segmentation and check consistency of assigned identities. The Neuron Registration Vector Encoding approach proposed here is uniquely well suited for tracking neurons in brains undergoing large deformations. When applied to whole-brain calcium imaging recordings in freely moving C. elegans, this analysis pipeline located 156 neurons for the duration of an 8 minute recording and consistently found more neurons more quickly than manual or semi-automated approaches.

40 CFR 60.4153 - Recordation of Hg allowance allocations.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Recordation of Hg allowance allocations... Times for Coal-Fired Electric Steam Generating Units Hg Allowance Tracking System § 60.4153 Recordation of Hg allowance allocations. (a) By December 1, 2006, the Administrator will record in the Hg Budget...

Feasibility of utilizing a commercial eye tracker to assess electronic health record use during patient simulation.

Science.gov (United States)

Gold, Jeffrey Allen; Stephenson, Laurel E; Gorsuch, Adriel; Parthasarathy, Keshav; Mohan, Vishnu

2016-09-01

Numerous reports describe unintended consequences of electronic health record implementation. Having previously described physicians' failures to recognize patient safety issues within our electronic health record simulation environment, we now report on our use of eye and screen-tracking technology to understand factors associated with poor error recognition during an intensive care unit-based electronic health record simulation. We linked performance on the simulation to standard eye and screen-tracking readouts including number of fixations, saccades, mouse clicks and screens visited. In addition, we developed an overall Composite Eye Tracking score which measured when, where and how often each safety item was viewed. For 39 participants, the Composite Eye Tracking score correlated with performance on the simulation (p = 0.004). Overall, the improved performance was associated with a pattern of rapid scanning of data manifested by increased number of screens visited (p = 0.001), mouse clicks (p = 0.03) and saccades (p = 0.004). Eye tracking can be successfully integrated into electronic health record-based simulation and provides a surrogate measure of cognitive decision making and electronic health record usability. © The Author(s) 2015.

A cloud-based electronic medical record for scheduling, tracking, and documenting examinations and treatment of retinopathy of prematurity.

Science.gov (United States)

Arnold, Robert W; Jacob, Jack; Matrix, Zinnia

2012-01-01

Screening by neonatologists and staging by ophthalmologists is a cost-effective intervention, but inadvertent missed examinations create a high liability. Paper tracking, bedside schedule reminders, and a computer scheduling and reminder program were compared for speed of input and retrospective missed examination rate. A neonatal intensive care unit (NICU) process was then programmed for cloud-based distribution for inpatient and outpatient retinopathy of prematurity monitoring. Over 11 years, 367 premature infants in one NICU were prospectively monitored. The initial paper system missed 11% of potential examinations, the Windows server-based system missed 2%, and the current cloud-based system missed 0% of potential inpatient and outpatient examinations. Computer input of examinations took the same or less time than paper recording. A computer application with a deliberate NICU process improved the proportion of eligible neonates getting their scheduled eye examinations in a timely manner. Copyright 2012, SLACK Incorporated.

The distribution of intergranular gaps along α tracks recorded in ionographic emulsions

International Nuclear Information System (INIS)

Wittendorp-Rechenmann, E.; Senger, B.; Koziel-Vigneron, V.; Rechenmann, R.V.

1990-01-01

Detailed microscopic analyses performed at high statistics (size: 1100) on 8.776 MeV α tracks materialised in nuclear emulsion demonstrated a distribution of intergranular gaps along the primary ion's path that was not only non-random but also fluctuated significantly with the energy of the projectile. The highest and lowest gap frequencies measured correspond to the energy region of 0.7 - 1.5 MeV and 7 MeV, respectively. The gap length distributions followed an exponential law, a known characteristic of the intergranular gaps distributed along the tracks of high energy charged particles. A tentative interpretation of these observations has been undertaken in terms of spatial distributions of δ rays around the incoming ion's path, by applying the Double-Differential Cross-Section Mixed Treatment to the geometrical configuration of the AgBr microcrystals embedded in the gelatin matrix. At this preliminary stage of our modelling, the main experimental data could already be reproduced satisfactorily. (author)

Ontology development for provenance tracing in National Climate Assessment of the US Global Change Research Program

Science.gov (United States)

Ma, X.; Zheng, J. G.; Goldstein, J.; Duggan, B.; Xu, J.; Du, C.; Akkiraju, A.; Aulenbach, S.; Tilmes, C.; Fox, P. A.

2013-12-01

The periodical National Climate Assessment (NCA) of the US Global Change Research Program (USGCRP) [1] produces reports about findings of global climate change and the impacts of climate change on the United States. Those findings are of great public and academic concerns and are used in policy and management decisions, which make the provenance information of findings in those reports especially important. The USGCRP is developing a Global Change Information System (GCIS), in which the NCA reports and associated provenance information are the primary records. We were modeling and developing Semantic Web applications for the GCIS. By applying a use case-driven iterative methodology [2], we developed an ontology [3] to represent the content structure of a report and the associated provenance information. We also mapped the classes and properties in our ontology into the W3C PROV-O ontology [4] to realize the formal presentation of provenance. We successfully implemented the ontology in several pilot systems for a recent National Climate Assessment report (i.e., the NCA3). They provide users the functionalities to browse and search provenance information with topics of interest. Provenance information of the NCA3 has been made structured and interoperable by applying the developed ontology. Besides the pilot systems we developed, other tools and services are also able to interact with the data in the context of the 'Web of data' and thus create added values. Our research shows that the use case-driven iterative method bridges the gap between Semantic Web researchers and earth and environmental scientists and is able to be deployed rapidly for developing Semantic Web applications. Our work also provides first-hand experience for re-using the W3C PROV-O ontology in the field of earth and environmental sciences, as the PROV-O ontology is recently ratified (on 04/30/2013) by the W3C as a recommendation and relevant applications are still rare. [1] http

Finding dense locations in symbolic indoor tracking data

DEFF Research Database (Denmark)

Ahmed, Tanvir; Pedersen, Torben Bach; Lu, Hua

2017-01-01

presents two graph-based models for constrained and semi-constrained indoor movement, respectively, and then uses the models to map raw tracking records into mapping records that represent object entry and exit times in particular locations. Subsequently, an efficient indexing structure called Hierarchical...... Dense Location Time Index (HDLT-Index) is proposed for indexing the time intervals of the mapping table, along with index construction, query processing, and pruning techniques. The HDLT-Index supports very efficient aggregate point, interval, and duration queries as well as dense location queries......Finding the dense locations in large indoor spaces is very useful for many applications such as overloaded area detection, security control, crowd management, indoor navigation, and so on. Indoor tracking data can be enormous and are not immediately ready for finding dense locations. This paper...

Double tracks test site characterization report

International Nuclear Information System (INIS)

1996-05-01

This report presents the results of site characterization activities performed at the Double Tracks Test Site, located on Range 71 North, of the Nellis Air Force Range (NAFR) in southern Nevada. Site characterization activities included reviewing historical data from the Double Tracks experiment, previous site investigation efforts, and recent site characterization data. The most recent site characterization activities were conducted in support of an interim corrective action to remediate the Double Tracks Test Site to an acceptable risk to human health and the environment. Site characterization was performed using a phased approach. First, previously collected data and historical records sere compiled and reviewed. Generalized scopes of work were then prepared to fill known data gaps. Field activities were conducted and the collected data were then reviewed to determine whether data gaps were filled and whether other areas needed to be investigated. Additional field efforts were then conducted, as required, to adequately characterize the site. Characterization of the Double Tracks Test Site was conducted in accordance with the US Department of Energy's (DOE) Streamlined Approach for Environmental Restoration (SAFER)

Entity Linking Leveraging the GeoDeepDive Cyberinfrastructure and Managing Uncertainty with Provenance.

Science.gov (United States)

Maio, R.; Arko, R. A.; Lehnert, K.; Ji, P.

2017-12-01

Unlocking the full, rich, network of links between the scientific literature and the real world entities to which data correspond - such as field expeditions (cruises) on oceanographic research vessels and physical samples collected during those expeditions - remains a challenge for the geoscience community. Doing so would enable data reuse and integration on a broad scale; making it possible to inspect the network and discover, for example, all rock samples reported in the scientific literature found within 10 kilometers of an undersea volcano, and associated geochemical analyses. Such a capability could facilitate new scientific discoveries. The GeoDeepDive project provides negotiated access to 4.2+ million documents from scientific publishers, enabling text and document mining via a public API and cyberinfrastructure. We mined this corpus using entity linking techniques, which are inherently uncertain, and recorded provenance information about each link. This opens the entity linking methodology to scrutiny, and enables downstream applications to make informed assessments about the suitability of an entity link for consumption. A major challenge is how to model and disseminate the provenance information. We present results from entity linking between journal articles, research vessels and cruises, and physical samples from the Petrological Database (PetDB), and incorporate Linked Data resources such as cruises in the Rolling Deck to Repository (R2R) catalog where possible. Our work demonstrates the value and potential of the GeoDeepDive cyberinfrastructure in combination with Linked Data infrastructure provided by the EarthCube GeoLink project. We present a research workflow to capture provenance information that leverages the World Wide Web Consortium (W3C) recommendation PROV Ontology.

Track Reconstruction with Cosmic Ray Data at the Tracker Integration Facility

CERN Document Server

Adam, Wolfgang; Dragicevic, Marko; Friedl, Markus; Fruhwirth, R; Hansel, S; Hrubec, Josef; Krammer, Manfred; Oberegger, Margit; Pernicka, Manfred; Schmid, Siegfried; Stark, Roland; Steininger, Helmut; Uhl, Dieter; Waltenberger, Wolfgang; Widl, Edmund; Van Mechelen, Pierre; Cardaci, Marco; Beaumont, Willem; de Langhe, Eric; de Wolf, Eddi A; Delmeire, Evelyne; Hashemi, Majid; Bouhali, Othmane; Charaf, Otman; Clerbaux, Barbara; Elgammal, J.-P. Dewulf. S; Hammad, Gregory Habib; de Lentdecker, Gilles; Marage, Pierre Edouard; Vander Velde, Catherine; Vanlaer, Pascal; Wickens, John; Adler, Volker; Devroede, Olivier; De Weirdt, Stijn; D'Hondt, Jorgen; Goorens, Robert; Heyninck, Jan; Maes, Joris; Mozer, Matthias Ulrich; Tavernier, Stefaan; Van Lancker, Luc; Van Mulders, Petra; Villella, Ilaria; Wastiels, C; Bonnet, Jean-Luc; Bruno, Giacomo; De Callatay, Bernard; Florins, Benoit; Giammanco, Andrea; Gregoire, Ghislain; Keutgen, Thomas; Kcira, Dorian; Lemaitre, Vincent; Michotte, Daniel; Militaru, Otilia; Piotrzkowski, Krzysztof; Quertermont, L; Roberfroid, Vincent; Rouby, Xavier; Teyssier, Daniel; Daubie, Evelyne; Anttila, Erkki; Czellar, Sandor; Engstrom, Pauli; Harkonen, J; Karimaki, V; Kostesmaa, J; Kuronen, Auli; Lampen, Tapio; Linden, Tomas; Luukka, Panja-Riina; Maenpaa, T; Michal, Sebastien; Tuominen, Eija; Tuominiemi, Jorma; Ageron, Michel; Baulieu, Guillaume; Bonnevaux, Alain; Boudoul, Gaelle; Chabanat, Eric; Chabert, Eric Christian; Chierici, Roberto; Contardo, Didier; Della Negra, Rodolphe; Dupasquier, Thierry; Gelin, Georges; Giraud, Noël; Guillot, Gérard; Estre, Nicolas; Haroutunian, Roger; Lumb, Nicholas; Perries, Stephane; Schirra, Florent; Trocme, Benjamin; Vanzetto, Sylvain; Agram, Jean-Laurent; Blaes, Reiner; Drouhin, Frédéric; Ernenwein, Jean-Pierre; Fontaine, Jean-Charles; Berst, Jean-Daniel; Brom, Jean-Marie; Didierjean, Francois; Goerlach, Ulrich; Graehling, Philippe; Gross, Laurent; Hosselet, J; Juillot, Pierre; Lounis, Abdenour; Maazouzi, Chaker; Olivetto, Christian; Strub, Roger; Van Hove, Pierre; Anagnostou, Georgios; Brauer, Richard; Esser, Hans; Feld, Lutz; Karpinski, Waclaw; Klein, Katja; Kukulies, Christoph; Olzem, Jan; Ostapchuk, Andrey; Pandoulas, Demetrios; Pierschel, Gerhard; Raupach, Frank; Schael, Stefan; Schwering, Georg; Sprenger, Daniel; Thomas, Maarten; Weber, Markus; Wittmer, Bruno; Wlochal, Michael; Beissel, Franz; Bock, E; Flugge, G; Gillissen, C; Hermanns, Thomas; Heydhausen, Dirk; Jahn, Dieter; Kaussen, Gordon; Linn, Alexander; Perchalla, Lars; Poettgens, Michael; Pooth, Oliver; Stahl, Achim; Zoeller, Marc Henning; Buhmann, Peter; Butz, Erik; Flucke, Gero; Hamdorf, Richard Helmut; Hauk, Johannes; Klanner, Robert; Pein, Uwe; Schleper, Peter; Steinbruck, G; Blum, P; De Boer, Wim; Dierlamm, Alexander; Dirkes, Guido; Fahrer, Manuel; Frey, Martin; Furgeri, Alexander; Hartmann, Frank; Heier, Stefan; Hoffmann, Karl-Heinz; Kaminski, Jochen; Ledermann, Bernhard; Liamsuwan, Thiansin; Muller, S; Muller, Th; Schilling, Frank-Peter; Simonis, Hans-Jürgen; Steck, Pia; Zhukov, Valery; Cariola, P; De Robertis, Giuseppe; Ferorelli, Raffaele; Fiore, Luigi; Preda, M; Sala, Giuliano; Silvestris, Lucia; Tempesta, Paolo; Zito, Giuseppe; Creanza, Donato; De Filippis, Nicola; De Palma, Mauro; Giordano, Domenico; Maggi, Giorgio; Manna, Norman; My, Salvatore; Selvaggi, Giovanna; Albergo, Sebastiano; Chiorboli, Massimiliano; Costa, Salvatore; Galanti, Mario; Giudice, Nunzio; Guardone, Nunzio; Noto, Francesco; Potenza, Renato; Saizu, Mirela Angela; Sparti, V; Sutera, Concetta; Tricomi, Alessia; Tuve, Cristina; Brianzi, Mirko; Civinini, Carlo; Maletta, Fernando; Manolescu, Florentina; Meschini, Marco; Paoletti, Simone; Sguazzoni, Giacomo; Broccolo, B; Ciulli, Vitaliano; Focardi, R. D'Alessandro. E; Frosali, Simone; Genta, Chiara; Landi, Gregorio; Lenzi, Piergiulio; Macchiolo, Anna; Magini, Nicolo; Parrini, Giuliano; Scarlini, Enrico; Cerati, Giuseppe Benedetto; Azzi, Patrizia; Bacchetta, Nicola; Candelori, Andrea; Dorigo, Tommaso; Kaminsky, A; Karaevski, S; Khomenkov, Volodymyr; Reznikov, Sergey; Tessaro, Mario; Bisello, Dario; De Mattia, Marco; Giubilato, Piero; Loreti, Maurizio; Mattiazzo, Serena; Nigro, Massimo; Paccagnella, Alessandro; Pantano, Devis; Pozzobon, Nicola; Tosi, Mia; Bilei, Gian Mario; Checcucci, Bruno; Fano, Livio; Servoli, Leonello; Ambroglini, Filippo; Babucci, Ezio; Benedetti, Daniele; Biasini, Maurizio; Caponeri, Benedetta; Covarelli, Roberto; Giorgi, Marco; Lariccia, Paolo; Mantovani, Giancarlo; Marcantonini, Marta; Postolache, Vasile; Santocchia, Attilio; Spiga, Daniele; Bagliesi, Giuseppe; Balestri, Gabriele; Berretta, Luca; Bianucci, S; Boccali, Tommaso; Bosi, Filippo; Bracci, Fabrizio; Castaldi, Rino; Ceccanti, Marco; Cecchi, Roberto; Cerri, Claudio; Cucoanes, Andi Sebastian; Dell'Orso, Roberto; Dobur, Didar; Dutta, Suchandra; Giassi, Alessandro; Giusti, Simone; Kartashov, Dmitry; Kraan, Aafke; Lomtadze, Teimuraz; Lungu, George-Adrian; Magazzu, Guido; Mammini, Paolo; Mariani, Filippo; Martinelli, Giovanni; Moggi, Andrea; Palla, Fabrizio; Palmonari, Francesco; Petragnani, Giulio; Profeti, Alessandro; Raffaelli, Fabrizio; Rizzi, Domenico; Sanguinetti, Giulio; Sarkar, Subir; Sentenac, Daniel; Serban, Alin Titus; Slav, Adrian; Soldani, A; Spagnolo, Paolo; Tenchini, Roberto; Tolaini, Sergio; Venturi, Andrea; Verdini, Piero Giorgio; Vos, Marcel; Zaccarelli, Luciano; Avanzini, Carlo; Basti, Andrea; Benucci, Leonardo; Bocci, Andrea; Cazzola, Ugo; Fiori, Francesco; Linari, Stefano; Massa, Maurizio; Messineo, Alberto; Segneri, Gabriele; Tonelli, Guido; Azzurri, Paolo; Bernardini, Jacopo; Borrello, Laura; Calzolari, Federico; Foa, Lorenzo; Gennai, Simone; Ligabue, Franco; Petrucciani, Giovanni; Rizzi, Andrea; Yang, Zong-Chang; Benotto, Franco; Demaria, Natale; Dumitrache, Floarea; Farano, R; Borgia, Maria Assunta; Castello, Roberto; Costa, Marco; Migliore, Ernesto; Romero, Alessandra; Abbaneo, Duccio; Abbas, M; Ahmed, Ijaz; Akhtar, I; Albert, Eric; Bloch, Christoph; Breuker, Horst; Butt, Shahid Aleem; Buchmuller, Oliver; Cattai, Ariella; Delaere, Christophe; Delattre, Michel; Edera, Laura Maria; Engstrom, Pauli; Eppard, Michael; Gateau, Maryline; Gill, Karl; Giolo-Nicollerat, Anne-Sylvie; Grabit, Robert; Honma, Alan; Huhtinen, Mika; Kloukinas, Kostas; Kortesmaa, Jarmo; Kottelat, Luc-Joseph; Kuronen, Auli; Leonardo, Nuno; Ljuslin, Christer; Mannelli, Marcello; Masetti, Lorenzo; Marchioro, Alessandro; Mersi, Stefano; Michal, Sebastien; Mirabito, Laurent; Muffat-Joly, Jeannine; Onnela, Antti; Paillard, Christian; Pal, Imre; Pernot, Jean-Francois; Petagna, Paolo; Petit, Patrick; Piccut, C; Pioppi, Michele; Postema, Hans; Ranieri, Riccardo; Ricci, Daniel; Rolandi, Gigi; Ronga, Frederic Jean; Sigaud, Christophe; Syed, A; Siegrist, Patrice; Tropea, Paola; Troska, Jan; Tsirou, Andromachi; Vander Donckt, Muriel; Vasey, François; Alagoz, Enver; Amsler, Claude; Chiochia, Vincenzo; Regenfus, Christian; Robmann, Peter; Rochet, Jacky; Rommerskirchen, Tanja; Schmidt, Alexander; Steiner, Stefan; Wilke, Lotte; Church, Ivan; Cole, Joanne; Coughlan, John A; Gay, Arnaud; Taghavi, S; Tomalin, Ian R; Bainbridge, Robert; Cripps, Nicholas; Fulcher, Jonathan; Hall, Geoffrey; Noy, Matthew; Pesaresi, Mark; Radicci, Valeria; Raymond, David Mark; Sharp, Peter; Stoye, Markus; Wingham, Matthew; Zorba, Osman; Goitom, Israel; Hobson, Peter R; Reid, Ivan; Teodorescu, Liliana; Hanson, Gail; Jeng, Geng-Yuan; Liu, Haidong; Pasztor, Gabriella; Satpathy, Asish; Stringer, Robert; Mangano, Boris; Affolder, K; Affolder, T; Allen, Andrea; Barge, Derek; Burke, Samuel; Callahan, D; Campagnari, Claudio; Crook, A; D'Alfonso, Mariarosaria; Dietch, J; Garberson, Jeffrey; Hale, David; Incandela, H; Incandela, Joe; Jaditz, Stephen; Kalavase, Puneeth; Kreyer, Steven Lawrence; Kyre, Susanne; Lamb, James; Mc Guinness, C; Mills, C; Nguyen, Harold; Nikolic, Milan; Lowette, Steven; Rebassoo, Finn; Ribnik, Jacob; Richman, Jeffrey; Rubinstein, Noah; Sanhueza, S; Shah, Yousaf Syed; Simms, L; Staszak, D; Stoner, J; Stuart, David; Swain, Sanjay Kumar; Vlimant, Jean-Roch; White, Dean; Ulmer, Keith; Wagner, Stephen Robert; Bagby, Linda; Bhat, Pushpalatha C; Burkett, Kevin; Cihangir, Selcuk; Gutsche, Oliver; Jensen, Hans; Johnson, Mark; Luzhetskiy, Nikolay; Mason, David; Miao, Ting; Moccia, Stefano; Noeding, Carsten; Ronzhin, Anatoly; Skup, Ewa; Spalding, William J; Spiegel, Leonard; Tkaczyk, Slawek; Yumiceva, Francisco; Zatserklyaniy, Andriy; Zerev, E; Anghel, Ioana Maria; Bazterra, Victor Eduardo; Gerber, Cecilia Elena; Khalatian, S; Shabalina, Elizaveta; Baringer, Philip; Bean, Alice; Chen, Jie; Hinchey, Carl Louis; Martin, Christophe; Moulik, Tania; Robinson, Richard; Gritsan, Andrei; Lae, Chung Khim; Tran, Nhan Viet; Everaerts, Pieter; Hahn, Kristan Allan; Harris, Philip; Nahn, Steve; Rudolph, Matthew; Sung, Kevin; Betchart, Burton; Demina, Regina; Gotra, Yury; Korjenevski, Sergey; Miner, Daniel Carl; Orbaker, Douglas; Christofek, Leonard; Hooper, Ryan; Landsberg, Greg; Nguyen, Duong; Narain, Meenakshi; Speer, Thomas; Tsang, Ka Vang

2008-01-01

The subsystems of the CMS silicon strip tracker were integrated and commissioned at the Tracker Integration Facility (TIF) in the period from November 2006 to July 2007. As part of the commissioning, large samples of cosmic ray data were recorded under various running conditions in the absence of a magnetic field. Cosmic rays detected by scintillation counters were used to trigger the readout of up to 15\\,\\% of the final silicon strip detector, and over 4.7~million events were recorded. This document describes the cosmic track reconstruction and presents results on the performance of track and hit reconstruction as from dedicated analyses.

Reconstructed storm tracks reveal three centuries of changing moisture delivery to North America.

Science.gov (United States)

Wise, Erika K; Dannenberg, Matthew P

2017-06-01

Moisture delivery to western North America is closely linked to variability in the westerly storm tracks of midlatitude cyclones, which are, in turn, modified by larger-scale features such as the El Niño-Southern Oscillation system. Instrumental and modeling data suggest that extratropical storm tracks may be intensifying and shifting poleward due to anthropogenic climate change, but it is difficult to separate recent trends from natural variability because of the large amount of decadal and longer variation in storm tracks and their limited instrumental record. We reconstruct cool-season, midlatitude Pacific storm-track position and intensity from 1693 to 1995 CE using existing tree-ring chronologies along with a network of newly developed chronologies from the U.S. Pacific Northwest, where small variations in storm-track position can have a major influence on hydroclimate patterns. Our results show high interannual-to-multidecadal variability in storm-track position and intensity over the past 303 years, with spectral signatures characteristic of tropical and northern Pacific influences. Comparison with reconstructions of precipitation and tropical sea surface temperature confirms the relationship between shifting drought patterns in the Pacific Northwest and storm-track variability through time and demonstrates the long-term influence of El Niño. These results allow us to place recent storm-track changes in the context of decadal and multidecadal fluctuations across the long-term record, showing that recent changes in storm-track intensity likely represent a warming-related increase amplified by natural decadal variability.

Antral follicle count in normal (fertility-proven) and infertile Indian women.

Science.gov (United States)

Agarwal, Arjit; Verma, Ashish; Agarwal, Shubhra; Shukla, Ram Chandra; Jain, Madhu; Srivastava, Arvind

2014-07-01

Antral follicle count (AFC) has been labeled as the most accurate biomarker to assess female fecundity. Unfortunately, no baseline Indian data exists, and we continue using surrogate values from the Western literature (inferred from studies on women, grossly different than Indian women in morphology and genetic makeup). (1) To establish the role of AFC as a function of ovarian reserve in fertility-proven and in subfertile Indian women. (2) To establish baseline cut-off AFC values for Indian women. Prospective observational case-control study. Thirty patients undergoing workup for infertility were included and compared to equal number of controls (women with proven fertility). The basal ovarian volume and AFC were measured by endovaginal. USG the relevant clinical data and hormonal assays were charted for every patient. SPSS platform was used to perform the Student's t-test and Mann-Whitney U-test for intergroup comparisons. Correlations were determined by Pearson's ranked correlation coefficient. Regression analysis revealed the highest correlation of AFC and age in fertile and infertile patients with difference in mean AFC of both the groups. Comparison of the data recorded for cases and controls showed no significant difference in the mean ovarian volume. AFC has the closest association with chronological age in normal and infertile Indian women. The same is lower in infertile women than in matched controls. Baseline and cut-off values in Indian women are lower than that mentioned in the Western literature.

Sudetic larch in Germany - Results of provenance and progeny research

Energy Technology Data Exchange (ETDEWEB)

Weisgerber, H. [Forest Centre for Management Planning, Research and Ecology, Hann Muenden (Germany)

1995-12-31

There are only a few older sources of Sudetic larch in Germany. They distinguish themselves by outstanding growth and low susceptibility to canker. This impression was confirmed by results of provenance research. The Sudetic larch tested in comparison with numerous other provenances proved to be fast-growing, site-tolerant, to a large extent insusceptible to canker, with straight but also slightly to moderately curved stems. The Sudetic provenances behave remarkably uniformly as regards these characteristics. In addition to provenance research investigations have been going on for a long time in Germany into individual differences within the Sudetic larch populations. A report is given on the results of progeny tests from free and controlled pollination, using the example of a seed orchard consisting of 54 clones. We point also to possibilities for improving stem quality by selection steps. The results of provenance and progeny research on Sudetic larch are in the meantime being put to use to a large extent in practical forestry. The forest administrations of various federal lands recommend the use of reproductive material of Sudetic origin and from seed orchards. 20 refs, 3 figs

Sudetic larch in Germany - Results of provenance and progeny research

Energy Technology Data Exchange (ETDEWEB)

Weisgerber, H [Forest Centre for Management Planning, Research and Ecology, Hann Muenden (Germany)

1996-12-31

There are only a few older sources of Sudetic larch in Germany. They distinguish themselves by outstanding growth and low susceptibility to canker. This impression was confirmed by results of provenance research. The Sudetic larch tested in comparison with numerous other provenances proved to be fast-growing, site-tolerant, to a large extent insusceptible to canker, with straight but also slightly to moderately curved stems. The Sudetic provenances behave remarkably uniformly as regards these characteristics. In addition to provenance research investigations have been going on for a long time in Germany into individual differences within the Sudetic larch populations. A report is given on the results of progeny tests from free and controlled pollination, using the example of a seed orchard consisting of 54 clones. We point also to possibilities for improving stem quality by selection steps. The results of provenance and progeny research on Sudetic larch are in the meantime being put to use to a large extent in practical forestry. The forest administrations of various federal lands recommend the use of reproductive material of Sudetic origin and from seed orchards. 20 refs, 3 figs

Comparison of Extremum-Seeking Control Techniques for Maximum Power Point Tracking in Photovoltaic Systems

Directory of Open Access Journals (Sweden)

Chen-Han Wu

2011-12-01

Full Text Available Due to Japan’s recent nuclear crisis and petroleum price hikes, the search for renewable energy sources has become an issue of immediate concern. A promising candidate attracting much global attention is solar energy, as it is green and also inexhaustible. A maximum power point tracking (MPPT controller is employed in such a way that the output power provided by a photovoltaic (PV system is boosted to its maximum level. However, in the context of abrupt changes in irradiance, conventional MPPT controller approaches suffer from insufficient robustness against ambient variation, inferior transient response and a loss of output power as a consequence of the long duration required of tracking procedures. Accordingly, in this work the maximum power point tracking is carried out successfully using a sliding mode extremum-seeking control (SMESC method, and the tracking performances of three controllers are compared by simulations, that is, an extremum-seeking controller, a sinusoidal extremum-seeking controller and a sliding mode extremum-seeking controller. Being able to track the maximum power point promptly in the case of an abrupt change in irradiance, the SMESC approach is proven by simulations to be superior in terms of system dynamic and steady state responses, and an excellent robustness along with system stability is demonstrated as well.

Tracking performance of the ATLAS inner detector and observation of known hadrons

NARCIS (Netherlands)

Kayl, M.; Trischuk, W.

2010-01-01

The inner detector is the central tracking device of the ATLAS detector. In these proceedings the tracking performance of the inner detector is presented on collision data recorded at $\\sqrt{s}$ = 900 GeV and 7 TeV. The identification of resonances like $\\Xi$ and $\\Omega$ baryons in cascade decays

A study of CR-39 track response to charged particles from NOVA implosions

International Nuclear Information System (INIS)

Phillips, T.W.; Cable, M.D.; Hicks, D.G.; Li, C.K.; Petrasso, R.D.; Seguin, F.H.

1996-01-01

We have exposed CR-39 track recording material to a number of NOVA implosions. Radiation from the implosion passed through an array of ranging filters, which aided identification of the incident particles and their energies. The etching procedure was calibrated by including a piece of track exposed to DD protons from a small accelerator. For the same shots, we quantitatively compare the DD neutron yield with the DD proton yield determined from the track. In DT implosions, tracks produced by neutron interactions prevent observation of charged-particle tracks that are produced by the processes of knock-on, secondary or tertiary fusion

Seamless Provenance Representation and Use in Collaborative Science Scenarios

Science.gov (United States)

Missier, P.; Ludaescher, B.; Bowers, S.; Altintas, I.; Anand, M. K.; Dey, S.; Sarkar, A.; Shrestha, B.; Goble, C.

2010-12-01

The notion of sharing scientific data has only recently begun to gain ground in science, where data is still considered a private asset. There is growing evidence, however, that the benefits of scientific collaboration through early data sharing during the course of a science project may outgrow the risk of losing exclusive ownership of the data. As exemplar success stories are making the headlines[1], principles of effective information sharing have become the subject of e-science research. In particular, any piece of published data should be self-describing, to the extent necessary for consumers to determine its suitability for reuse in their own projects. This is accomplished by associating a body of formally specified and machine-processable metadata to the data. When data is produced and reused by independent groups, however, metadata interoperability issues emerge. This is the case for provenance, a form of metadata that describes the history of a data product, Y. Provenance is typically expressed as a graph-structured set of dependencies that account for the sequence of computational or interactive steps that led to Y, often starting from some primary, observational data. Traversing dependency graphs is one of the mechanisms used to answer questions on data reliability. In the context of the NSF DataONE project[2], we have been studying issues of provenance interoperability in scientific collaboration scenarios. Consider a first scientist, Alice, who publishes a data product X along with its provenance, and a second scientist who further transforms X into a new product Y, also along with its provenance. A third scientist, who is interested in Y, expects to be able to trace Y's history up to the inputs used by Alice. This is only possible, however, if provenance accumulates into a single, uniform graph that can be seamlessly traversed. This becomes problematic when provenance is captured using different tools and computational models (i.e. workflow systems

Biomechanical differences in the stem straightening process among Pinus pinaster provenances. A new approach for early selection of stem straightness.

Science.gov (United States)

Sierra-de-Grado, Rosario; Pando, Valentín; Martínez-Zurimendi, Pablo; Peñalvo, Alejandro; Báscones, Esther; Moulia, Bruno

2008-06-01

Stem straightness is an important selection trait in Pinus pinaster Ait. breeding programs. Despite the stability of stem straightness rankings in provenance trials, the efficiency of breeding programs based on a quantitative index of stem straightness remains low. An alternative approach is to analyze biomechanical processes that underlie stem form. The rationale for this selection method is that genetic differences in the biomechanical processes that maintain stem straightness in young plants will continue to control stem form throughout the life of the tree. We analyzed the components contributing most to genetic differences among provenances in stem straightening processes by kinetic analysis and with a biomechanical model defining the interactions between the variables involved (Fournier's model). This framework was tested on three P. pinaster provenances differing in adult stem straightness and growth. One-year-old plants were tilted at 45 degrees, and individual stem positions and sizes were recorded weekly for 5 months. We measured the radial extension of reaction wood and the anatomical features of wood cells in serial stem cross sections. The integral effect of reaction wood on stem leaning was computed with Fournier's model. Responses driven by both primary and secondary growth were involved in the stem straightening process, but secondary-growth-driven responses accounted for most differences among provenances. Plants from the straight-stemmed provenance showed a greater capacity for stem straightening than plants from the sinuous provenances mainly because of (1) more efficient reaction wood (higher maturation strains) and (2) more pronounced secondary-growth-driven autotropic decurving. These two process-based traits are thus good candidates for early selection of stem straightness, but additional tests on a greater number of genotypes over a longer period are required.

Sizing procedures for sun-tracking PV system with batteries

Directory of Open Access Journals (Sweden)

Gerek Ömer Nezih

2017-01-01

Full Text Available Deciding optimum number of PV panels, wind turbines and batteries (i.e. a complete renewable energy system for minimum cost and complete energy balance is a challenging and interesting problem. In the literature, some rough data models or limited recorded data together with low resolution hourly averaged meteorological values are used to test the sizing strategies. In this study, active sun tracking and fixed PV solar power generation values of ready-to-serve commercial products are recorded throughout 2015–2016. Simultaneously several outdoor parameters (solar radiation, temperature, humidity, wind speed/direction, pressure are recorded with high resolution. The hourly energy consumption values of a standard 4-person household, which is constructed in our campus in Eskisehir, Turkey, are also recorded for the same period. During sizing, novel parametric random process models for wind speed, temperature, solar radiation, energy demand and electricity generation curves are achieved and it is observed that these models provide sizing results with lower LLP through Monte Carlo experiments that consider average and minimum performance cases. Furthermore, another novel cost optimization strategy is adopted to show that solar tracking PV panels provide lower costs by enabling reduced number of installed batteries. Results are verified over real recorded data.

Sizing procedures for sun-tracking PV system with batteries

Science.gov (United States)

Nezih Gerek, Ömer; Başaran Filik, Ümmühan; Filik, Tansu

2017-11-01

Deciding optimum number of PV panels, wind turbines and batteries (i.e. a complete renewable energy system) for minimum cost and complete energy balance is a challenging and interesting problem. In the literature, some rough data models or limited recorded data together with low resolution hourly averaged meteorological values are used to test the sizing strategies. In this study, active sun tracking and fixed PV solar power generation values of ready-to-serve commercial products are recorded throughout 2015-2016. Simultaneously several outdoor parameters (solar radiation, temperature, humidity, wind speed/direction, pressure) are recorded with high resolution. The hourly energy consumption values of a standard 4-person household, which is constructed in our campus in Eskisehir, Turkey, are also recorded for the same period. During sizing, novel parametric random process models for wind speed, temperature, solar radiation, energy demand and electricity generation curves are achieved and it is observed that these models provide sizing results with lower LLP through Monte Carlo experiments that consider average and minimum performance cases. Furthermore, another novel cost optimization strategy is adopted to show that solar tracking PV panels provide lower costs by enabling reduced number of installed batteries. Results are verified over real recorded data.

Robust Control of Welding Robot for Tracking a Rectangular Welding Line

Directory of Open Access Journals (Sweden)

Manh Dung Ngo

2008-11-01

Full Text Available This paper highlights a welding robot (WR for its end effector to track a rectangular welding line (RWL. The WR includes five actuators which use a DC motor as a power source. Two controllers are proposed to control the WR's end effector: a main controller and a servo controller. Firstly, based on WR's kinematic equations and its feedback errors using backstepping method the main controller is proposed to design the reference-inputs for the WR's actuators in order that the WR's end effector tracks the RWL. Secondly, based on the dynamic equation of WR's actuator, the servo controller is designed using an active disturbance rejection control method. Finally, a control system incorporated with the main controller and the servo controllers make the WR's end effector robustly track a RWL in the presence of the modeling uncertainty and disturbances during the welding process. In experiment, the main controller which has a function as a master of the control system links to the five servo controllers which have a function as a slave via I2C communication. The effectiveness of the proposed control system is proven through the simulation and experimental results.

Robust Control of Welding Robot for Tracking a Rectangular Welding Line

Directory of Open Access Journals (Sweden)

Manh Dung Ngo

2006-09-01

Full Text Available This paper highlights a welding robot (WR for its end effector to track a rectangular welding line (RWL. The WR includes five actuators which use a DC motor as a power source. Two controllers are proposed to control the WR's end effector: a main controller and a servo controller. Firstly, based on WR's kinematic equations and its feedback errors using backstepping method the main controller is proposed to design the reference-inputs for the WR's actuators in order that the WR's end effector tracks the RWL. Secondly, based on the dynamic equation of WR's actuator, the servo controller is designed using an active disturbance rejection control method. Finally, a control system incorporated with the main controller and the servo controllers make the WR's end effector robustly track a RWL in the presence of the modeling uncertainty and disturbances during the welding process. In experiment, the main controller which has a function as a master of the control system links to the five servo controllers which have a function as a slave via I2C communication. The effectiveness of the proposed control system is proven through the simulation and experimental results.

Determination of marble provenance: limits of isotopic analysis

International Nuclear Information System (INIS)

Germann, K.; Holzmann, G.; Winkler, F.J.

1980-01-01

Provenance determination of Thessalian stelae marbles using the C/O isotopic analysis proved to be misleading, as the isotopic composition even in very small quarrying areas is heterogeneous and isotopic coincidence of marbles from very distant sources occurs. Therefore additional geological features must be taken into consideration and preference should be given to combinations of both petrographical and geochemical properties. Geological field work to establish the range of possible marble sources and the variability within these sources is one of the prerequisites of provenance studies. (author)

Fagus sylvatica L. provenances maintain different leaf metabolic profiles and functional response

Science.gov (United States)

Aranda, Ismael; Sánchez-Gómez, David; de Miguel, Marina; Mancha, Jose Antonio; Guevara, María Angeles; Cadahía, Estrella; Fernández de Simón, María Brígida

2017-07-01

Most temperate forest tree species will suffer important environmental changes as result of the climate change. Adaptiveness to local conditions could change at different sites in the future. In this context, the study of intra-specific variability is important to clarify the singularity of different local populations. Phenotypic differentiation between three beech provenances covering a wide latitudinal range (Spain/ES, Germany/DE and Sweden/SE), was studied in a greenhouse experiment. Non-target leaf metabolite profiles and ecophysiological response was analyzed in well-watered and water stressed seedlings. There was a provenance-specific pattern in the relative concentrations of some leaf metabolites regardless watering treatment. The DE and SE from the center and north of the distribution area of the species showed a clear differentiation from the ES provenance in the relative concentration of some metabolites. Thus the ES provenance from the south maintained larger relative concentration of some organic and amino acids (e.g. fumaric and succinic acids or valine and isoleucine), and in some secondary metabolites (e.g. kaempferol, caffeic and ferulic acids). The ecophysiological response to mild water stress was similar among the three provenances as a consequence of the moderate water stress applied to seedlings, although leaf N isotope composition (δ15N) and leaf C:N ratio were higher and lower respectively in DE than in the other two provenances. This would suggest potential differences in the capacity to uptake and post-process nitrogen according to provenance. An important focus of the study was to address for the first time inter-provenance leaf metabolic diversity in beech from a non-targeted metabolic profiling approach that allowed differentiation of the three studied provenances.

Proposal for a semiconductor high resolution tracking detector

International Nuclear Information System (INIS)

Rehak, P.

1983-01-01

A 'new' concept for detection and tracking of charged particles in high energy physics experiments is proposed. It combines a well known high purity semiconductor diode detector (HPSDD) with a heterojunction structure (HJ) and a negative electron affinity (NEA) surface. The detector should be capable of providing a two dimensional view (few cm 2 ) of multi-track events with the following properties: a) position resolution down to a few μm (10 8 position elements); b) high density of information (10 2 -10 3 dots per mm of minimum ionizing track); c) high rate capabilities (few MHz); d) live operation with options to be triggered and/or the information from the detector can be used as an input for the decision to record an event. (orig.)

Dynamic Data Citation through Provenance - new approach for reproducible science in Geoscience Australia.

Science.gov (United States)

Bastrakova, I.; Car, N.

2017-12-01

Geoscience Australia (GA) is recognised and respected as the National Repository and steward of multiple nationally significance data collections that provides geoscience information, services and capability to the Australian Government, industry and stakeholders. Internally, this brings a challenge of managing large volume (11 PB) of diverse and highly complex data distributed through a significant number of catalogues, applications, portals, virtual laboratories, and direct downloads from multiple locations. Externally, GA is facing constant changer in the Government regulations (e.g. open data and archival laws), growing stakeholder demands for high quality and near real-time delivery of data and products, and rapid technological advances enabling dynamic data access. Traditional approach to citing static data and products cannot satisfy increasing demands for the results from scientific workflows, or items within the workflows to be open, discoverable, thrusted and reproducible. Thus, citation of data, products, codes and applications through the implementation of provenance records is being implemented. This approach involves capturing the provenance of many GA processes according to a standardised data model and storing it, as well as metadata for the elements it references, in a searchable set of systems. This provides GA with ability to cite workflows unambiguously as well as each item within each workflow, including inputs and outputs and many other registered components. Dynamic objects can therefore be referenced flexibly in relation to their generation process - a dataset's metadata indicates where to obtain its provenance from - meaning the relevant facts of its dynamism need not be crammed into a single citation object with a single set of attributes. This allows for simple citations, similar to traditional static document citations such as references in journals, to be used for complex dynamic data and other objects such as software code.

A multi-frame particle tracking algorithm robust against input noise

International Nuclear Information System (INIS)

Li, Dongning; Zhang, Yuanhui; Sun, Yigang; Yan, Wei

2008-01-01

The performance of a particle tracking algorithm which detects particle trajectories from discretely recorded particle positions could be substantially hindered by the input noise. In this paper, a particle tracking algorithm is developed which is robust against input noise. This algorithm employs the regression method instead of the extrapolation method usually employed by existing algorithms to predict future particle positions. If a trajectory cannot be linked to a particle at a frame, the algorithm can still proceed by trying to find a candidate at the next frame. The connectivity of tracked trajectories is inspected to remove the false ones. The algorithm is validated with synthetic data. The result shows that the algorithm is superior to traditional algorithms in the aspect of tracking long trajectories

Pharmacists' Perception of the Sale of Non-Clinically Proven Health ...

African Journals Online (AJOL)

Pharmacists' Perception of the Sale of Non-Clinically Proven Health Supplements in Penang, Malaysia. ... A total of 10.7 % respondents indicated that the sale of non-clinically proven products result in high profit. Only 25.0 % of the pharmacists ... Keywords: Perception, Health promotion, Urban poor, Health supplements.

SU-F-T-458: Tracking Trends of TG-142 Parameters Via Analysis of Data Recorded by 2D Chamber Array

Energy Technology Data Exchange (ETDEWEB)

Alexandrian, A; Kabat, C; Defoor, D; Saenz, D; Rasmussen, K; Kirby, N; Gutierrez, A; Papanikolaou, N; Stathakis, S [University of Texas HSC SA, San Antonio, TX (United States)

2016-06-15

Purpose: With increasing QA demands of medical physicists in clinical radiation oncology, the need for an effective method of tracking clinical data has become paramount. A tool was produced which scans through data automatically recorded by a 2D chamber array and extracts relevant information recommended by TG-142. Using this extracted information a timely and comprehensive analysis of QA parameters can be easily performed enabling efficient monthly checks on multiple linear accelerators simultaneously. Methods: A PTW STARCHECK chamber array was used to record several months of beam outputs from two Varian 2100 series linear accelerators and a Varian NovalisTx−. In conjunction with the chamber array, a beam quality phantom was used to simultaneously to determine beam quality. A minimalist GUI was created in MatLab that allows a user to set the file path of the data for each modality to be analyzed. These file paths are recorded to a MatLab structure and then subsequently accessed by a script written in Python (version 3.5.1) which then extracts values required to perform monthly checks as outlined by recommendations from TG-142. The script incorporates calculations to determine if the values recorded by the chamber array fall within an acceptable threshold. Results: Values obtained by the script are written to a spreadsheet where results can be easily viewed and annotated with a “pass” or “fail” and saved for further analysis. In addition to creating a new scheme for reviewing monthly checks, this application allows for able to succinctly store data for follow up analysis. Conclusion: By utilizing this tool, parameters recommended by TG-142 for multiple linear accelerators can be rapidly obtained and analyzed which can be used for evaluation of monthly checks.

Optical tracking of nanoscale particles in microscale environments

Science.gov (United States)

Mathai, P. P.; Liddle, J. A.; Stavis, S. M.

2016-03-01

The trajectories of nanoscale particles through microscale environments record useful information about both the particles and the environments. Optical microscopes provide efficient access to this information through measurements of light in the far field from nanoparticles. Such measurements necessarily involve trade-offs in tracking capabilities. This article presents a measurement framework, based on information theory, that facilitates a more systematic understanding of such trade-offs to rationally design tracking systems for diverse applications. This framework includes the degrees of freedom of optical microscopes, which determine the limitations of tracking measurements in theory. In the laboratory, tracking systems are assemblies of sources and sensors, optics and stages, and nanoparticle emitters. The combined characteristics of such systems determine the limitations of tracking measurements in practice. This article reviews this tracking hardware with a focus on the essential functions of nanoparticles as optical emitters and microenvironmental probes. Within these theoretical and practical limitations, experimentalists have implemented a variety of tracking systems with different capabilities. This article reviews a selection of apparatuses and techniques for tracking multiple and single particles by tuning illumination and detection, and by using feedback and confinement to improve the measurements. Prior information is also useful in many tracking systems and measurements, which apply across a broad spectrum of science and technology. In the context of the framework and review of apparatuses and techniques, this article reviews a selection of applications, with particle diffusion serving as a prelude to tracking measurements in biological, fluid, and material systems, fabrication and assembly processes, and engineered devices. In so doing, this review identifies trends and gaps in particle tracking that might influence future research.

Systems for tracking minimally invasive surgical instruments.

Science.gov (United States)

Chmarra, M K; Grimbergen, C A; Dankelman, J

2007-01-01

Minimally invasive surgery (e.g. laparoscopy) requires special surgical skills, which should be objectively assessed. Several studies have shown that motion analysis is a valuable assessment tool of basic surgical skills in laparoscopy. However, to use motion analysis as the assessment tool, it is necessary to track and record the motions of laparoscopic instruments. This article describes the state of the art in research on tracking systems for laparoscopy. It gives an overview on existing systems, on how these systems work, their advantages, and their shortcomings. Although various approaches have been used, none of the tracking systems to date comes out as clearly superior. A great number of systems can be used in training environment only, most systems do not allow the use of real laparoscopic instruments, and only a small number of systems provide force feedback.

Evaluating the Impact of Internships - Longitudinal Participant Tracking in the Soars Program

Science.gov (United States)

Haacker, R.; Sloan, V.

2014-12-01

While there is widespread agreement about the benefits of research internship experiences for students, long-term tracking of student progress beyond the summer experience is challenging. Coordinated tracking can effectively document program impact, inform programmatic improvement, and identifying gaps in the internship effort. Tracking can also strengthen diversity efforts and the retention of students from underrepresented groups. Continuous follow-up and guidance can only be provided to students if we know where they are, what they are doing and what they need in order to stay engaged in the field. The SOARS Program at the National Center for Atmospheric Research has supported undergraduate students for over 18 years to enter and succeed in graduate school. Over 85% of SOARS participants have transitioned to geoscience graduate programs or the STEM workforce. The SOARS mission is to broaden participation in the atmospheric and related sciences by engaging students from groups historically under-represented in science, including Black or African-American, American Indian or Alaska Native, Hispanic or Latino, female, first-generation college students, and students with disabilities. SOARS relies on proven intervention strategies such as multi-year research experiences, multifaceted mentoring, and a strong learning community. Fostering relationships developed during this time using a wider range of technologies and program longevity play important roles in tracking participants over time. This presentation will highlight significant program results and share the tracking and evaluation techniques utilized in SOARS.

Privacy and Trust Attitudes in the Intent to Volunteer for Data-Tracking Research

Science.gov (United States)

Smith, Catherine L.

2016-01-01

Introduction: The analysis of detailed interaction records is fundamental to development of user-centred systems. Researchers seeking such data must recruit volunteers willing to allow tracking of their interactions. This study examines privacy and trust attitudes in the intent to volunteer for research requiring installation of tracking software.…

ProvenCare-Psoriasis: A disease management model to optimize care.

Science.gov (United States)

Gionfriddo, Michael R; Pulk, Rebecca A; Sahni, Dev R; Vijayanagar, Sonal G; Chronowski, Joseph J; Jones, Laney K; Evans, Michael A; Feldman, Steven R; Pride, Howard

2018-03-15

There are a variety of evidence-based treatments available for psoriasis. The transition of this evidence into practice is challenging. In this article, we describe the design of our disease management approach for Psoriasis (ProvenCare®) and present preliminary evidence of the effect of its implementation. In designing our approach, we identified three barriers to optimal care: 1) lack of a standardized and discrete disease activity measure within the electronic health record, 2) lack of a system-wide, standardized approach to care, and 3) non-uniform financial access to appropriate non-pharmacologic treatments. We implemented several solutions, which collectively form our approach. We standardized the documentation of clinical data such as body surface area (BSA), created a disease management algorithm for psoriasis, and aligned incentives to facilitate the implementation of the algorithm. This approach provides more coordinated, cost effective care for psoriasis, while being acceptable to key stakeholders. Future work will examine the effect of the implementation of our approach on important clinical and patient outcomes.

Is self-regard a sociometer or a hierometer? Self-esteem tracks status and inclusion, narcissism tracks status.

Science.gov (United States)

Mahadevan, Nikhila; Gregg, Aiden P; Sedikides, Constantine

2018-04-02

What adaptive function does self-regard serve? Sociometer theory predicts that it positively tracks social inclusion. A new theory, hierometer theory, predicts that it positively tracks social status. We tested both predictions with respect to two types of self-regard: self-esteem and narcissism. Study 1 (N = 940), featuring a cross-sectional design, found that both status and inclusion covaried positively with self-esteem, but that status alone covaried positively with narcissism. These links held independently of gender, age, and the Big Five personality traits. Study 2 (N = 627), a preregistered cross-sectional study, obtained similar results with alternative measures of self-esteem and narcissism. Studies 3-4 featured experimental designs in which status and inclusion were orthogonally manipulated. Study 3 (N = 104) found that both higher status and higher inclusion promoted higher self-esteem, whereas only higher status promoted higher narcissism. Study 4 (N = 259) obtained similar results with alternative measures of self-esteem and narcissism. The findings suggest that self-esteem operates as both sociometer and hierometer, positively tracking both status and inclusion, whereas narcissism operates primarily as a hierometer, positively tracking status. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

The implementation of an automated tracking algorithm for the track detection of migratory anticyclones affecting the Mediterranean

Science.gov (United States)

Hatzaki, Maria; Flocas, Elena A.; Simmonds, Ian; Kouroutzoglou, John; Keay, Kevin; Rudeva, Irina

2013-04-01

Migratory cyclones and anticyclones mainly account for the short-term weather variations in extra-tropical regions. By contrast to cyclones that have drawn major scientific attention due to their direct link to active weather and precipitation, climatological studies on anticyclones are limited, even though they also are associated with extreme weather phenomena and play an important role in global and regional climate. This is especially true for the Mediterranean, a region particularly vulnerable to climate change, and the little research which has been done is essentially confined to the manual analysis of synoptic charts. For the construction of a comprehensive climatology of migratory anticyclonic systems in the Mediterranean using an objective methodology, the Melbourne University automatic tracking algorithm is applied, based to the ERA-Interim reanalysis mean sea level pressure database. The algorithm's reliability in accurately capturing the weather patterns and synoptic climatology of the transient activity has been widely proven. This algorithm has been extensively applied for cyclone studies worldwide and it has been also successfully applied for the Mediterranean, though its use for anticyclone tracking is limited to the Southern Hemisphere. In this study the performance of the tracking algorithm under different data resolutions and different choices of parameter settings in the scheme is examined. Our focus is on the appropriate modification of the algorithm in order to efficiently capture the individual characteristics of the anticyclonic tracks in the Mediterranean, a closed basin with complex topography. We show that the number of the detected anticyclonic centers and the resulting tracks largely depend upon the data resolution and the search radius. We also find that different scale anticyclones and secondary centers that lie within larger anticyclone structures can be adequately represented; this is important, since the extensions of major

Tracking change over time

Science.gov (United States)

,

2011-01-01

Landsat satellites capture images of Earth from space-and have since 1972! These images provide a long-term record of natural and human-induced changes on the global landscape. Comparing images from multiple years reveals slow and subtle changes as well as rapid and devastating ones. Landsat images are available over the Internet at no charge. Using the free software MultiSpec, students can track changes to the landscape over time-just like remote sensing scientists do! The objective of the Tracking Change Over Time lesson plan is to get students excited about studying the changing Earth. Intended for students in grades 5-8, the lesson plan is flexible and may be used as a student self-guided tutorial or as a teacher-led class lesson. Enhance students' learning of geography, map reading, earth science, and problem solving by seeing landscape changes from space.

An international research project on Armenian archaeological sites: fission-track dating of obsidians

Energy Technology Data Exchange (ETDEWEB)

Badalian, R.; Bigazzi, G. E-mail: g.bigazzi@iggi.pi.cnr.it; Cauvin, M.-C.; Chataigner, C.; Jrbashyan, R.; Karapetyan, S.G.; Oddone, M.; Poidevin, J.-L

2001-06-01

In the Mediterranean and adjacent regions, the Caucasus is one of the less studied areas in relation to provenance studies of prehistoric obsidian artefacts. In the frame of an international INTAS research project, an extensive surveying and sampling campaign was carried out in the numerous obsidian bearing volcanic complexes of Armenia. 33 obsidian samples were analysed using the fission-track dating method in order to characterise the potential sources of the numerous artefacts found in prehistoric sites. Ages cluster into five groups--Upper Neopleistocene Q{sub III}, Middle Neopleistocene Q{sub II}, Lower Neopleistocene Q{sub I}, Lower Eopleistocene Q{sub EI} and Lower Pliocene N{sub 3}{sup 1} groups. This research represents a significant contribution to a better knowledge of chronology of Armenian volcanism for which only few data were available. The resulting data-set appears to be a solid base for future provenance studies.

Quantifying the effect of seasonal and vertical habitat tracking on planktonic foraminifera proxies

Directory of Open Access Journals (Sweden)

L. Jonkers

2017-06-01

Full Text Available The composition of planktonic foraminiferal (PF calcite is routinely used to reconstruct climate variability. However, PF ecology leaves a large imprint on the proxy signal: seasonal and vertical habitats of PF species vary spatially, causing variable offsets from annual mean surface conditions recorded by sedimentary assemblages. PF seasonality changes with temperature in a way that minimises the environmental change that individual species experience and it is not unlikely that changes in depth habitat also result from such habitat tracking. While this behaviour could lead to an underestimation of spatial or temporal trends as well as of variability in proxy records, most palaeoceanographic studies are (implicitly based on the assumption of a constant habitat. Up to now, the effect of habitat tracking on foraminifera proxy records has not yet been formally quantified on a global scale. Here we attempt to characterise this effect on the amplitude of environmental change recorded in sedimentary PF using core top δ18O data from six species. We find that the offset from mean annual near-surface δ18O values varies with temperature, with PF δ18O indicating warmer than mean conditions in colder waters (on average by −0.1 ‰ (equivalent to 0.4 °C per °C, thus providing a first-order quantification of the degree of underestimation due to habitat tracking. We use an empirical model to estimate the contribution of seasonality to the observed difference between PF and annual mean δ18O and use the residual Δδ18O to assess trends in calcification depth. Our analysis indicates that given an observation-based model parametrisation calcification depth increases with temperature in all species and sensitivity analysis suggests that a temperature-related seasonal habitat adjustment is essential to explain the observed isotope signal. Habitat tracking can thus lead to a significant reduction in the amplitude of recorded environmental change

Model-based Abstraction of Data Provenance

NARCIS (Netherlands)

Probst, Christian W.; Hansen, René Rydhof

Identifying provenance of data provides insights to the origin of data and intermediate results, and has recently gained increased interest due to data-centric applications. In this work we extend a data-centric system view with actors handling the data and policies restricting actions. This

Efficiency and Privacy Enhancement for a Track and Trace System of RFID-Based Supply Chains

Directory of Open Access Journals (Sweden)

Xunjun Chen

2015-06-01

Full Text Available One of the major applications of Radio Frequency Identification (RFID technology is in supply chain management as it promises to provide real-time visibility based on the function of track and trace. However, such an RFID-based track and trace system raises new security and privacy challenges due to the restricted resource of tags. In this paper, we refine three privacy related models (i.e., the privacy, path unlinkability, and tag unlinkability of RFID-based track and trace systems, and clarify the relations among these privacy models. Specifically, we have proven that privacy is equivalent to path unlinkability and tag unlinkability implies privacy. Our results simplify the privacy concept and protocol design for RFID-based track and trace systems. Furthermore, we propose an efficient track and trace scheme, Tracker+, which allows for authentic and private identification of RFID-tagged objects in supply chains. In the Tracker+, no computational ability is required for tags, but only a few bytes of storage (such as EPC Class 1 Gen 2 tags are needed to store the tag state. Indeed, Tracker+ reduces the memory requirements for each tag by one group element compared to the Tracker presented in other literature. Moreover, Tracker+ provides privacy against supply chain inside attacks.

Growth dynamics variation of different larch provenances under the mountain conditions in Poland

Energy Technology Data Exchange (ETDEWEB)

Kulej, M. [Univ. of Agriculture, Cracow (Poland). Section of Seed Production and Selection

1995-12-31

The results of 25-year investigations based on measurements and statistical analysis concerning the growth dynamics variation of larch provenances from the entire area of Poland are reported in this paper. This is the first larch provenance experiment in Poland under mountain conditions. The results obtained showed a significant variability among the provenances tested as regards the basic growth characters (height, d.b.h., growth index) at the age of 5, 8, 11, 15, 20 and 25 years. The larch from Klodzko and Proszkow turned out to be the best in respect of growth during the entire 25-years period. Decidedly bad were provenances from Marcule, Grojec, Rawa mazowiecka and Kroscienko. We cannot forecast the future growth of larch when trees are 5-years old since such prognosis may carry an error. However, on the basis of the results obtained it may be concluded that when trees are about 8 years old the stabilization of the position of individual provenances as regards growth takes place. The height growth curves for the individual provenances during the 25-years period (with exception of the provenance from Marcule) fall within the interval {+-} 0,5S from the compensated curve for the entire population studied. All larch provenances in the experiment had reached the height growth culmination. A greatest differentiation in respect of this character occurred in case of the provenances from Sudetes. 27 refs, 4 figs, 8 tabs

Growth dynamics variation of different larch provenances under the mountain conditions in Poland

Energy Technology Data Exchange (ETDEWEB)

Kulej, M [Univ. of Agriculture, Cracow (Poland). Section of Seed Production and Selection

1996-12-31

The results of 25-year investigations based on measurements and statistical analysis concerning the growth dynamics variation of larch provenances from the entire area of Poland are reported in this paper. This is the first larch provenance experiment in Poland under mountain conditions. The results obtained showed a significant variability among the provenances tested as regards the basic growth characters (height, d.b.h., growth index) at the age of 5, 8, 11, 15, 20 and 25 years. The larch from Klodzko and Proszkow turned out to be the best in respect of growth during the entire 25-years period. Decidedly bad were provenances from Marcule, Grojec, Rawa mazowiecka and Kroscienko. We cannot forecast the future growth of larch when trees are 5-years old since such prognosis may carry an error. However, on the basis of the results obtained it may be concluded that when trees are about 8 years old the stabilization of the position of individual provenances as regards growth takes place. The height growth curves for the individual provenances during the 25-years period (with exception of the provenance from Marcule) fall within the interval {+-} 0,5S from the compensated curve for the entire population studied. All larch provenances in the experiment had reached the height growth culmination. A greatest differentiation in respect of this character occurred in case of the provenances from Sudetes. 27 refs, 4 figs, 8 tabs

Completely automated measurement facility (PAVICOM) for track-detector data processing

CERN Document Server

Aleksandrov, A B; Feinberg, E L; Goncharova, L A; Konovalova, N S; Martynov, A G; Polukhina, N G; Roussetski, A S; Starkov, NI; Tsarev, V A

2004-01-01

A review of technical capabilities and investigations performed using the completely automated measuring facility (PAVICOM) is presented. This very efficient facility for track-detector data processing in the field of nuclear and high-energy particle physics has been constructed in the Lebedev physical institute. PAVICOM is widely used in Russia for treatment of experimental data from track detectors (emulsion and solid-state trackers) in high- and low-energy physics, cosmic ray physics, etc. PAVICOM provides an essential improvement of the efficiency of experimental studies. In contrast to semi-automated microscopes widely used until now, PAVICOM is capable of performing completely automated measurements of charged particle tracks in nuclear emulsions and track detectors without employing hard visual work. In this case, track images are recorded by CCD cameras and then are digitized and converted into files. Thus, experimental data processing is accelerated by approximately a thousand times. Completely autom...

A comparative study of track reconstruction methods in the context of CMS physics

International Nuclear Information System (INIS)

Winkler, M.

2002-05-01

This thesis deals mainly with the problem of reconstructing the tracks of charged particles from the measurements recorded by the CMS Tracker, in particular with track fitting. The task of the track fit is to use the available information (the subsets of hits belonging to the track of a particle found by a track finder) in a statistically optimal way for the estimation of the track parameters and the associated errors. Due to the high track multiplicity at LHC and the large background of noise hits, combinatorial methods such as the Kalman filter may have problems in the association of hits to tracks, and their results will be biased in the case of wrong hits assigned to a track. Recently developped non-linear, adaptive methods such as the deterministic annealing filter and the multi track filter try to solve the assignment problem during the track fit, by determining an assignment probability of a hit to a track. The methods are studied in the CMS Tracker using various event topologies. (author)

Developing an electronic system to manage and track emergency medications.

Science.gov (United States)

Hamm, Mark W; Calabrese, Samuel V; Knoer, Scott J; Duty, Ashley M

2018-03-01

The development of a Web-based program to track and manage emergency medications with radio frequency identification (RFID) is described. At the Cleveland Clinic, medication kit restocking records and dispense locations were historically documented using a paper record-keeping system. The Cleveland Clinic investigated options to replace the paper-based tracking logs with a Web-based program that could track the real-time location and inventory of emergency medication kits. Vendor collaboration with a board of pharmacy (BOP) compliance inspector and pharmacy personnel resulted in the creation of a dual barcoding system using medication and pocket labels. The Web-based program was integrated with a Cleveland Clinic-developed asset tracking system using active RFID tags to give the real-time location of the medication kit. The Web-based program and the asset tracking system allowed identification of kits nearing expiration or containing recalled medications. Conversion from a paper-based system to a Web-based program began in October 2013. After 119 days, data were evaluated to assess the success of the conversion. Pharmacists spent an average of 27 minutes per day approving medication kits during the postimplementation period versus 102 minutes daily using the paper-based system, representing a 74% decrease in pharmacist time spent on this task. Prospective reports are generated monthly to allow the manager to assess the expected workload and adjust staffing for the next month. Implementation of a BOP-approved Web-based system for managing and tracking emergency medications with RFID integration decreased pharmacist review time, minimized compliance risk, and increased access to real-time data. Copyright © 2018 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

76 FR 3115 - Privacy Act of 1974; System of Records

Science.gov (United States)

2011-01-19

... Integrated Results and Statistical Tracking.'' System Location: Delete entry and replace with ``Headquarters... replace with ``Records are accessed by person(s) responsible for servicing the record system in... need-to-know. The system additionally incorporates integrated system security features to protect data...

75 FR 48655 - Privacy Act of 1974; System of Records

Science.gov (United States)

2010-08-11

... recertification, the file may include proficiency data in one or more skill areas. Electronic records may contain... educational, training, and conferencing entities for participant enrollment, tracking, evaluation, and payment... on electronic storage media. RETRIEVABILITY: Records may be retrieved by name, student identification...

An alternative way to track the hot money in turbulent times

Science.gov (United States)

Sensoy, Ahmet

2015-02-01

During recent years, networks have proven to be an efficient way to characterize and investigate a wide range of complex financial systems. In this study, we first obtain the dynamic conditional correlations between filtered exchange rates (against US dollar) of several countries and introduce a time-varying threshold correlation level to define dynamic strong correlations between these exchange rates. Then, using evolving networks obtained from strong correlations, we propose an alternative approach to track the hot money in turbulent times. The approach is demonstrated for the time period including the financial turmoil of 2008. Other applications are also discussed.

Short Hospital Stay after Laparoscopic Colorectal Surgery without Fast Track

DEFF Research Database (Denmark)

Burgdorf, Stefan K; Rosenberg, Jacob

2012-01-01

Purpose. Short hospital stay and equal or reduced complication rates have been demonstrated after fast track open colonic surgery. However, fast track principles of perioperative care can be difficult to implement and often require increased nursing staff because of more concentrated nursing tasks...... care, that is, without implementing fast track principles, on length of stay after colorectal resection for cancer. Methods. Records of all patients operated for colorectal cancer from November 2004 to December 2008 in our department were reviewed. No specific patients were selected for laparoscopic...... in our department resulted in shorter hospital stay without using fast track principles for peri- and postoperative care in patients not receiving a stoma during the operation. Consequently, we aimed to reduce hospitalisation without increasing cost in nursing staff per hospital bed. Length of stay...

Inferring animal densities from tracking data using Markov chains.

Science.gov (United States)

Whitehead, Hal; Jonsen, Ian D

2013-01-01

The distributions and relative densities of species are keys to ecology. Large amounts of tracking data are being collected on a wide variety of animal species using several methods, especially electronic tags that record location. These tracking data are effectively used for many purposes, but generally provide biased measures of distribution, because the starts of the tracks are not randomly distributed among the locations used by the animals. We introduce a simple Markov-chain method that produces unbiased measures of relative density from tracking data. The density estimates can be over a geographical grid, and/or relative to environmental measures. The method assumes that the tracked animals are a random subset of the population in respect to how they move through the habitat cells, and that the movements of the animals among the habitat cells form a time-homogenous Markov chain. We illustrate the method using simulated data as well as real data on the movements of sperm whales. The simulations illustrate the bias introduced when the initial tracking locations are not randomly distributed, as well as the lack of bias when the Markov method is used. We believe that this method will be important in giving unbiased estimates of density from the growing corpus of animal tracking data.

Inferring animal densities from tracking data using Markov chains.

Directory of Open Access Journals (Sweden)

Hal Whitehead

Full Text Available The distributions and relative densities of species are keys to ecology. Large amounts of tracking data are being collected on a wide variety of animal species using several methods, especially electronic tags that record location. These tracking data are effectively used for many purposes, but generally provide biased measures of distribution, because the starts of the tracks are not randomly distributed among the locations used by the animals. We introduce a simple Markov-chain method that produces unbiased measures of relative density from tracking data. The density estimates can be over a geographical grid, and/or relative to environmental measures. The method assumes that the tracked animals are a random subset of the population in respect to how they move through the habitat cells, and that the movements of the animals among the habitat cells form a time-homogenous Markov chain. We illustrate the method using simulated data as well as real data on the movements of sperm whales. The simulations illustrate the bias introduced when the initial tracking locations are not randomly distributed, as well as the lack of bias when the Markov method is used. We believe that this method will be important in giving unbiased estimates of density from the growing corpus of animal tracking data.

Rooting Ability of Melia volkensii Cuttings Under Different Auxin Concentration Levels and Provenances

International Nuclear Information System (INIS)

Oeba, V.O; Muok, B.; Odee, D

2007-01-01

Melia volkensii is one of the most popular fast growing agro-forestry tree species in East Africa's arid and semi arid lands. It is valued for for production of termite resistant timber. Kenya Forestry Research Institute is carrying out studies on management, improvement and domestication of species with a major focus on improving low germination mortality and other propagation methods. Vegetative propagation was investigated in order to supplement more seedlings for increased demand of the species. The objective of this study was to determine and predict the effect of varying levels of auxin concentrations on rooting of melia volkensii shoot cuttings under different provenances. The experiment was set in a split plot design and conducted in a non-mist propagator. The number of roots was recorded for every cutting in the experiment. Mean cumulative cutting percentage were analysed using ANOVA procedures by first checking homogeneity of variance; Pearson correlation were carried out to check the interrelation of the factors with rooting and Logistic ability of the cuttings. The results showed that cuttings inoculated with 0.3 mgl-1 s ignificantly (p n ot showing any rooting from three provenances. In conclusion 0.03 mgl-1 s hould be used for further vegetative propagation of M. vokensii. Cutting from Taveta inoculated with 0.3 mgl-1 w ould significantly increase the number of seedlings for planting

Tectonic/climatic control on sediment provenance in the Cape Roberts Project core record (southern Victoria Land, Antarctica): A pulsing late Oligocene/early Miocene signal from south revealed by detrital thermochronology

Science.gov (United States)

Olivetti, V.; Balestrieri, M. L.; Rossetti, F.; Talarico, F. M.

2012-04-01

, three peaks are detected reflecting different bedrock provenance areas. Two peaks older than 40 Ma (P2 and P3) are compatible with thermochronological data from TAM bedrock that underwent a stepwise denudation in Cretaceous times. A Peak younger than 40 Ma (P1) has been detected occasionally, recording the signal of a source area exhumed during late Oligocene /early Miocene with a constant denudation rate of 0.4 mm/yr (constant lag-time up-section), but absent in the onshore portion of the proximal TAM. Indeed, when compared with AFT data from ANDRILL cores, the relatively young P1 ages, suggest that part of sediments in the Cape Robert Rift basin have a provenance from source regions probably located far away in the south (i.e. Skelton-Byrd glaciers region) where bedrock experienced compatible thermal histories. This provenance would imply glacial systems with main flow patterns from south to the north, therefore orthogonal to the orientation of present-day drainage. We thus infer that the post-Eocene glacial and erosional history of the TAM front was significantly controlled by the N-S-trending transtensional regime that affected the western Ross Sea margin during transition from orthogonal to oblique rifting in the region. The appearance and disappearance of P1 along the drill-cored stratigraphic succession seems to be linked to the oscillation in the extent of the ice sheet.

On the frequency distributions per unit area of the projected and etchable lengths of surface-intersecting fission tracks: influences of track revelation, observation and measurement

International Nuclear Information System (INIS)

Jonckheere, R.; Haute, P. van den

1999-01-01

In addition to the statistical bounds discussed, thermal history analysis based on the projected and etchable length distributions of surface intersecting fission tracks is limited by systematic factors related to track revelation, observation and measurement. The effects of track revelation, in particular, distort these distributions in the length intervals of interest. An observation threshold poses a problem if it is described by a critical angle θ c , but not if it is described by other criteria proposed in the literature. Measurement imprecisions, predictably, blur the thermal history information contained in these distributions. Measurements of semi-confined tracks, added as a result of surface etching, are a more promising alternative to confined track length measurements for accessing the thermal history record in the fission track length distribution. On the other hand, measurements of the projected lengths of surface intersecting tracks offer the theoretical possibility of determining the true volumetric density N and true mean length m of an arbitrary population of fission tracks, thus allowing direct determination of the corrected age of samples with complex thermal histories. On a methodical level, knowledge of N and m allows to determine the efficiency with which fission tracks are counted under the optical microscope under exactly the same conditions as those under which fission track counts for routine dating purposes are performed

Effect of track etch rate on geometric track characteristics for polymeric track detectors

International Nuclear Information System (INIS)

Abdel-Naby, A.A.; El-Akkad, F.A.

2001-01-01

Analysis of the variable track etch rate on geometric track characteristic for polymeric track detectors has been applied to the case of LR-155 II SSNTD. Spectrometric characteristics of low energy alpha particles response by the polymeric detector have been obtained. The track etching kinematics theory of development of minor diameter of the etched tracks has been applied. The calculations show that, for this type of detector, the energy dependence of the minor track diameter d is linear for small-etched removal layer h. The energy resolution gets better for higher etched removal layer

Provenance and post-depositional low-temperature evolution of the James Ross Basin sedimentary rocks (Antarctic Peninsula) based on fission track analysis

Czech Academy of Sciences Publication Activity Database

Svojtka, Martin; Nývlt, D.; Murakami, Masaki; Vávrová, J.; Filip, Jiří; Mixa, P.

2009-01-01

Roč. 21, č. 6 (2009), s. 593-607 ISSN 0954-1020 R&D Projects: GA MŠk 1K05030 Institutional research plan: CEZ:AV0Z30130516 Keywords : James Ross Island * Seymour Island * Cretaceous–Palaeogene succession * fission track dating * zircon * apatite Subject RIV: DB - Geology ; Mineralogy Impact factor: 1.496, year: 2009

Wood structural differences between northern and southern beech provenances growing at a moderate site.

Science.gov (United States)

Eilmann, B; Sterck, F; Wegner, L; de Vries, S M G; von Arx, G; Mohren, G M J; den Ouden, J; Sass-Klaassen, U

2014-08-01

Planting provenances originating from southern to northern locations has been discussed as a strategy to speed up species migration and mitigate negative effects of climate change on forest stability and productivity. Especially for drought-susceptible species such as European beech (Fagus sylvatica L.), the introduction of drought-tolerant provenances from the south could be an option. Yet, beech has been found to respond plastically to environmental conditions, suggesting that the climate on the plantation site might be more important for tree growth than the genetic predisposition of potentially drought-adapted provenances. In this study, we compared the radial growth, wood-anatomical traits and leaf phenology of four beech provenances originating from southern (Bulgaria, France) and northern locations (Sweden, the Netherlands) and planted in a provenance trial in the Netherlands. The distribution of precipitation largely differs between the sites of origin. The northern provenances experience a maximum and the southern provenances experience a minimum of rainfall in summer. We compared tree productivity and the anatomy of the water-conducting system for the period from 2000 to 2010, including the drought year 2003. In addition, tree mortality and the timing of leaf unfolding in spring were analysed for the years 2001, 2007 and 2012. Comparison of these traits in the four beech provenances indicates the influence of genetic predisposition and local environmental factors on the performance of these provenances under moderate site conditions. Variation in radial growth was controlled by environment, although the growth level slightly differed due to genetic background. The Bulgarian provenance had an efficient water-conducting system which was moreover unaffected by the drought in 2003, pointing to a high ability of this provenance to cope well with dry conditions. In addition, the Bulgarian provenance showed up as most productive in terms of height and radial

A large-aperture low-cost hydrophone array for tracking whales from small boats.

Science.gov (United States)

Miller, B; Dawson, S

2009-11-01

A passive sonar array designed for tracking diving sperm whales in three dimensions from a single small vessel is presented, and the advantages and limitations of operating this array from a 6 m boat are described. The system consists of four free floating buoys, each with a hydrophone, built-in recorder, and global positioning system receiver (GPS), and one vertical stereo hydrophone array deployed from the boat. Array recordings are post-processed onshore to obtain diving profiles of vocalizing sperm whales. Recordings are synchronized using a GPS timing pulse recorded onto each track. Sensitivity analysis based on hyperbolic localization methods is used to obtain probability distributions for the whale's three-dimensional location for vocalizations received by at least four hydrophones. These localizations are compared to those obtained via isodiachronic sequential bound estimation. Results from deployment of the system around a sperm whale in the Kaikoura Canyon in New Zealand are shown.

Tracking the Progress of English Language Learners

Science.gov (United States)

Murphy, Audrey F.

2009-01-01

Educators need to document progress for English language learners, and the best structures to put into place in order to record their growth. Beginning with the stages of language proficiency, student progress can be tracked through the use of a baseline in all four language strands and the creation of rubrics to monitor performance. Language…

Three dimensional tracking for volumetric spectral-domain optical coherence tomography.

Science.gov (United States)

Maguluri, Gopi; Mujat, Mircea; Park, B H; Kim, K H; Sun, Wei; Iftimia, N V; Ferguson, R D; Hammer, Daniel X; Chen, Teresa C; de Boer, Johannes F

2007-12-10

We present a three-dimensional (3D) tracker for a clinical ophthalmic spectral domain optical coherence tomography (SD-OCT) system that combines depth-tracking with lateral tracking, providing a stabilized reference frame for 3D data recording and post acquisition analysis. The depth-tracking system is implemented through a real-time dynamic feedback mechanism to compensate for motion artifact in the axial direction. Active monitoring of the retina and adapting the reference arm of the interferometer allowed the whole thickness of the retina to be stabilized to within +/-100 mum. We achieve a relatively constant SNR from image to image by stabilizing the image of the retina with respect to the depth dependent sensitivity of SD-OCT. The depth tracking range of our system is 5.2 mm in air and the depth is adjusted every frame.nhancement in the stability of the images with the depth-tracking algorithm is demonstrated on a healthy volunteer.

[Deep brain recording and length of surgery in stereotactic and functional neurosurgery for movement disorders].

Science.gov (United States)

Teijeiro, Juan; Macías, Raúl J; Maragoto, Carlos; García, Iván; Alvarez, Mario; Quintanal, Nelson E

2014-01-01

Our objectives were to study the length of multi-unit recordings (MURs) of brain activity in 20 years of movement disorder neurosurgeries and to determine the number of times in which it was necessary for the teams using single-unit recording (SUR) to explore all the electrode tracks in the simultaneously recorded sites (SRS). This was a retrospective descriptive statistical analysis of MUR length on 4,296 tracks in 952 surgeries. The exclusion criteria were: tracks with fewer than 5 recorded signals, tracks that had a signal length different from the habitual 2s, or there being unusual situations not related to the MUR, as well as the first 20 surgeries of each surgical target. This yielded a total of 3,448 tracks in 805 surgeries. We also determined the number of the total 952 surgeries in which all the tracks in the SURs of the SRS were explored. The mean and its confidence interval (P=.05) of time per MUR track were 5.49±0.16min in subthalamic nucleus surgery, 8.82±0.24min in the medial or internal globus pallidus) and 18.51±1.31min in the ventral intermediate nucleus of the thalamus. For the total sum of tracks per surgery, in 75% of cases the total time was less than 39min in subthalamic nucleus, almost 42min in the medial or internal globus pallidus and less than 1h and 17min in ventral intermediate nucleus of the thalamus. All the tracks in the SUR SRS were explored in only 4.2% of the surgeries. The impact of MUR on surgical time is acceptable for this guide in objective localization for surgical targets, without having to use several simultaneous electrodes (not all indispensable in most of the cases). Consequently, there is less risk for the patient. Copyright © 2013 Sociedad Española de Neurocirugía. Published by Elsevier España. All rights reserved.

Water use efficiency studies of Acacia senegal (L.) Willd provenances in Sudan

International Nuclear Information System (INIS)

Mustafa, A.F.; Elamin, K.H.; Salih, A.A.

1996-01-01

An experiment was conducted in 1989 to screen Acacia senegal L. Willd provenances collected from within the natural gum belt for high water use efficiency. Thirteen provenances were tested for water use efficiency and consequently 6 out of them were selected for further screening. The selection was based on their performance in the preliminary screening. Both the preliminary and the detailed study revealed that provenances 7, 3 and 11 combine high dry matter production with high water use efficiency. Water use efficiency and dry matter production appears to be negatively correlated with root length density and root/shoot ratios. Provenances 7 which exhibited the highest water use efficiency and dry matter yield had the lowest root/shoot ratio and also a low root length density. Based on these studies provenance 7 can be considered a suitable candidate for introduction into gum-belt of Sudan through for rehabilitation of this region. (author). 5 refs, 1 fig., 3 tabs

Water use efficiency studies of Acacia senegal (L.) Willd provenances in Sudan

Energy Technology Data Exchange (ETDEWEB)

Mustafa, A F; Elamin, K H [Forestry Research Section, Wad Medani (Sudan); Salih, A A [Soil Science Section, Wad Medani (Sudan)

1996-07-01

An experiment was conducted in 1989 to screen Acacia senegal L. Willd provenances collected from within the natural gum belt for high water use efficiency. Thirteen provenances were tested for water use efficiency and consequently 6 out of them were selected for further screening. The selection was based on their performance in the preliminary screening. Both the preliminary and the detailed study revealed that provenances 7, 3 and 11 combine high dry matter production with high water use efficiency. Water use efficiency and dry matter production appears to be negatively correlated with root length density and root/shoot ratios. Provenances 7 which exhibited the highest water use efficiency and dry matter yield had the lowest root/shoot ratio and also a low root length density. Based on these studies provenance 7 can be considered a suitable candidate for introduction into gum-belt of Sudan through for rehabilitation of this region. (author). 5 refs, 1 fig., 3 tabs.

Tracking Clean Energy Progress 2013

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-06-01

Tracking Clean Energy Progress 2013 (TCEP 2013) examines progress in the development and deployment of key clean energy technologies. Each technology and sector is tracked against interim 2020 targets in the IEA Energy Technology Perspectives 2012 2°C scenario, which lays out pathways to a sustainable energy system in 2050. Stark message emerge: progress has not been fast enough; large market failures are preventing clean energy solutions from being taken up; considerable energy efficiency remains untapped; policies need to better address the energy system as a whole; and energy-related research, development and demonstration need to accelerate. Alongside these grim conclusions there is positive news. In 2012, hybrid-electric vehicle sales passed the 1 million mark. Solar photovoltaic systems were being installed at a record pace. The costs of most clean energy technologies fell more rapidly than anticipated.

Nonalbumin proteinuria predominates in biopsy-proven tenofovir nephrotoxicity.

Science.gov (United States)

Sise, Meghan E; Hirsch, Jamie S; Canetta, Pietro A; Herlitz, Leal; Mohan, Sumit

2015-05-15

Tenofovir disoproxil fumarate (TDF) nephrotoxicity is characterized by proximal renal tubular injury and dysmorphic mitochondria resulting in proteinuria, orthoglycemic glycosuria, and other markers of proximal tubular dysfunction. The objective of this study was to determine the pattern of proteinuria in patients with biopsy-proven TDF nephrotoxicity. Retrospective chart review. Patients with biopsy-proven TDF nephrotoxicity were identified and their medical charts and biopsy reports were reviewed. Comparison was made with HIV-infected patients not on TDF who underwent kidney biopsy. We identified 43 biopsy-proven cases of TDF nephrotoxicity; mean age 54.7 ± 0.4 years, 53% men, 42% whites. Thirty-seven cases reported proteinuria by dipstick of which only 60% had at least 2+ proteinuria. Twenty-seven patients had urine protein quantified by either 24-h collection or spot urine protein-to-creatinine ratio; median proteinuria was 1742 mg/day [interquartile range (IQR) 1200-2000 mg] and 1667 mg/g creatinine (IQR 851-1967 mg/g), respectively. Ten patients had concurrent urinary albumin measured, with a median 236 mg/g creatinine (IQR 137-343 mg/g). The mean urine albumin-to-urine protein ratio (uAPR) was 0.17 (IQR 0.14-0.19), confirming that TDF nephrotoxicity is primarily associated with nonalbumin proteinuria. Control cases had a uAPR of 0.65 (IQR 0.55-0.79) P < 0.001. Histopathology showed the predominance of proximal tubular injury with characteristic mitochondrial abnormalities. In the largest published cohort of patients with biopsy-proven TDF nephrotoxicity, we show that low uAPR is a reliable feature of this disease. Because of the predominance of nonalbumin proteinuria, dipstick urinalysis may be unreliable in TDF nephrotoxicity.

78 FR 60264 - Privacy Act of 1974; System of Records

Science.gov (United States)

2013-10-01

... as a management tool for statistical analysis, tracking, reporting, evaluating program effectiveness... authorized personnel. Access to records is limited to person(s) responsible for servicing the record in performance of their official duties and who are properly screened and cleared for need-to-know. Access to...

GPS tracking data of Lesser Black-backed Gulls and Herring Gulls breeding at the southern North Sea coast.

Science.gov (United States)

Stienen, Eric W M; Desmet, Peter; Aelterman, Bart; Courtens, Wouter; Feys, Simon; Vanermen, Nicolas; Verstraete, Hilbran; de Walle, Marc Van; Deneudt, Klaas; Hernandez, Francisco; Houthoofdt, Robin; Vanhoorne, Bart; Bouten, Willem; Buijs, Roland-Jan; Kavelaars, Marwa M; Müller, Wendt; Herman, David; Matheve, Hans; Sotillo, Alejandro; Lens, Luc

2016-01-01

In this data paper, Bird tracking - GPS tracking of Lesser Black-backed Gulls and Herring Gulls breeding at the southern North Sea coast is described, a species occurrence dataset published by the Research Institute for Nature and Forest (INBO). The dataset (version 5.5) contains close to 2.5 million occurrences, recorded by 101 GPS trackers mounted on 75 Lesser Black-backed Gulls and 26 Herring Gulls breeding at the Belgian and Dutch coast. The trackers were developed by the University of Amsterdam Bird Tracking System (UvA-BiTS, http://www.uva-bits.nl). These automatically record and transmit bird movements, which allows us and others to study their habitat use and migration behaviour in great detail. Our bird tracking network is operational since 2013. It is funded for LifeWatch by the Hercules Foundation and maintained in collaboration with UvA-BiTS and the Flanders Marine Institute (VLIZ). The recorded data are periodically released in bulk as open data (http://dataset.inbo.be/bird-tracking-gull-occurrences), and are also accessible through CartoDB and the Global Biodiversity Information Facility (GBIF).

Fission-track evidence of tectonic evolution in the northwestern Qaidam Basin, China

Science.gov (United States)

Sun, Guo-Qiang; Liu, Wei-Ming; Guo, Jia-Jia; Wang, Ye-Tong

2018-02-01

Fission-track dating was conducted on zircons and apatites from 11 cores of the upper Xiaganchaigou Formation and lower Shangganchaigou Formation (northwestern Qaidam Basin). The obtained apatite fission-track age is 3.1-61.9 Ma, and the zircon fission-track age is 49.2-123.5 Ma. Although the average apatite age is consistent with ages predicted from the stratigraphy, nine of the 11 apatite fission-track ages have P(χ2) 5%, exhibiting consistent characteristics and indicating that zircons retain provenance age information after burial. From the zircon and apatite ages, the fission-track length distribution, and the geological setting, the northwestern Qaidam Basin has experienced two tectonothermal events since the Late Mesozoic, at 39.1 ± 9.3 to 133.7 ± 6.6 Ma and 1.2 ± 0.6 to 32.0 ± 3.0 Ma. The earlier (39.1-133.7 Ma) tectonothermal event resulted from the initial collision of the Indian and Eurasian plates. As a consequence of the collision, the Altyn Tagh fault, which forms the northwestern boundary of the Qaidam Basin, began to develop. Subsequently, uplift of the Altyn Tagh mountains began and the northwestern depression of the Qaidam Basin started to form. The later (1.2-32.0 Ma) tectonothermal event resulted from further collision of the Indian and Eurasian plates along the Yarlung Tsangpo suture zone. Strata in the Qaidam Basin were further deformed by transpression in this period and this period played a crucial role in petroleum accumulation.

SU-D-BRD-05: Online Framework for Plan Tracking and Automatic Checks in Radiation Therapy

Energy Technology Data Exchange (ETDEWEB)

Zaks, D; Fletcher, R; Salamon, S; Kim, G; Ning, T; Cornell, M; Pawlicki, T; Cervino, L [UCSD Medical Center, La Jolla, CA (United States)

2015-06-15

Purpose: To develop an online framework that tracks a patient’s plan from initial simulation to treatment and that helps automate elements of the physics plan checks usually performed in the record and verify (RV) system and treatment planning system. Methods: We have developed PlanTracker, an online plan tracking system that automatically imports new patients tasks and follows it through treatment planning, physics checks, therapy check, and chart rounds. A survey was designed to collect information about the amount of time spent by medical physicists in non-physics related tasks. We then assessed these non-physics tasks for automation. Using these surveys, we directed our PlanTracker software development towards the automation of intra-plan physics review. We then conducted a systematic evaluation of PlanTracker’s accuracy by generating test plans in the RV system software designed to mimic real plans, in order to test its efficacy in catching errors both real and theoretical. Results: PlanTracker has proven to be an effective improvement to the clinical workflow in a radiotherapy clinic. We present data indicating that roughly 1/3 of the physics plan check can be automated, and the workflow optimized, and show the functionality of PlanTracker. When the full system is in clinical use we will present data on improvement of time use in comparison to survey data prior to PlanTracker implementation. Conclusion: We have developed a framework for plan tracking and automatic checks in radiation therapy. We anticipate using PlanTracker as a basis for further development in clinical/research software. We hope that by eliminating the most simple and time consuming checks, medical physicists may be able to spend their time on plan quality and other physics tasks rather than in arithmetic and logic checks. We see this development as part of a broader initiative to advance the clinical/research informatics infrastructure surrounding the radiotherapy clinic. This research

SU-D-BRD-05: Online Framework for Plan Tracking and Automatic Checks in Radiation Therapy

International Nuclear Information System (INIS)

Zaks, D; Fletcher, R; Salamon, S; Kim, G; Ning, T; Cornell, M; Pawlicki, T; Cervino, L

2015-01-01

Purpose: To develop an online framework that tracks a patient’s plan from initial simulation to treatment and that helps automate elements of the physics plan checks usually performed in the record and verify (RV) system and treatment planning system. Methods: We have developed PlanTracker, an online plan tracking system that automatically imports new patients tasks and follows it through treatment planning, physics checks, therapy check, and chart rounds. A survey was designed to collect information about the amount of time spent by medical physicists in non-physics related tasks. We then assessed these non-physics tasks for automation. Using these surveys, we directed our PlanTracker software development towards the automation of intra-plan physics review. We then conducted a systematic evaluation of PlanTracker’s accuracy by generating test plans in the RV system software designed to mimic real plans, in order to test its efficacy in catching errors both real and theoretical. Results: PlanTracker has proven to be an effective improvement to the clinical workflow in a radiotherapy clinic. We present data indicating that roughly 1/3 of the physics plan check can be automated, and the workflow optimized, and show the functionality of PlanTracker. When the full system is in clinical use we will present data on improvement of time use in comparison to survey data prior to PlanTracker implementation. Conclusion: We have developed a framework for plan tracking and automatic checks in radiation therapy. We anticipate using PlanTracker as a basis for further development in clinical/research software. We hope that by eliminating the most simple and time consuming checks, medical physicists may be able to spend their time on plan quality and other physics tasks rather than in arithmetic and logic checks. We see this development as part of a broader initiative to advance the clinical/research informatics infrastructure surrounding the radiotherapy clinic. This research

Installing and Commissioning a New Radioactive Waste Tracking System - Lessons Learned

Energy Technology Data Exchange (ETDEWEB)

Robert S. Anderson; Miklos Garamszeghy; Fred Rodrigues; Ed Nicholls

2005-05-01

Ontario Power Generation (OPG) recognizes the importance of information management particularly with regards to its low and intermediate level waste program. Various computer based waste tracking systems have been used in OPG since the 1980s. These systems tracked the physical receipt, processing, storage, and inventory of the waste. As OPG moved towards long-term management (e.g. disposal), it was recognized that tracking of more detailed waste characterization information was important. This required either substantial modification of the existing system to include a waste characterization module or replacing it entirely with a new system. After a detailed review of available options, it was decided that the existing waste tracking application would be replaced with the Idaho National Laboratory’s (INL) Integrated Waste Tracking System (IWTS). Installing and commissioning a system which must receive historical operational waste management information (data) and provide new features, required much more attention than was originally considered. The operational readiness of IWTS required extensive vetting and preparation of historic data (which itself had been created from multiple databases in varied formats) to ensure a consistent format for import of some 30,000-container records, and merging and linking these container records to a waste stream based characterization database. This paper will discuss some of the strengths and weaknesses contributing to project success or hindrance so that others can understand and minimize the difficulties inherent in a project of this magnitude.

Installing and Commissioning a New Radioactive Waste Tracking System - Lessons Learned

International Nuclear Information System (INIS)

Robert S. Anderson; Miklos Garamszeghy; Fred Rodrigues; Ed Nicholls

2005-01-01

Ontario Power Generation (OPG) recognizes the importance of information management particularly with regards to its low and intermediate level waste program. Various computer based waste tracking systems have been used in OPG since the 1980s. These systems tracked the physical receipt, processing, storage, and inventory of the waste. As OPG moved towards long-term management (e.g. disposal), it was recognized that tracking of more detailed waste characterization information was important. This required either substantial modification of the existing system to include a waste characterization module or replacing it entirely with a new system. After a detailed review of available options, it was decided that the existing waste tracking application would be replaced with the Idaho National Laboratory's (INL) Integrated Waste Tracking System (IWTS). Installing and commissioning a system which must receive historical operational waste management information (data) and provide new features, required much more attention than was originally considered. The operational readiness of IWTS required extensive vetting and preparation of historic data (which itself had been created from multiple databases in varied formats) to ensure a consistent format for import of some 30,000-container records, and merging and linking these container records to a waste stream based characterization database. This paper will discuss some of the strengths and weaknesses contributing to project success or hindrance so that others can understand and minimize the difficulties inherent in a project of this magnitude

Changing provenance of late Cenozoic sediments in the Jianghan Basin

Directory of Open Access Journals (Sweden)

Lei Shao

2015-07-01

Full Text Available The Yangtze River is one of the most important components of the East Asia river system. In this study, sediments in the Jianghan Basin, middle Yangtze River, were selected for trace element and rare earth element (REE measurements, in order to decipher information on the change of sediment provenance and evolution of the Yangtze River. According to the elemental variations, the late Cenozoic sediments of the Jianghan Basin could be divided into four parts. During 2.68–2.28 Ma and 1.25–0 Ma, provenance of the sediments was consistent, whereas sediments were derived from variable sources during 2.28–1.25 Ma. Comparison of the elemental compositions between the Pliocene and Quaternary sediments revealed a change in sediment source from a more felsic source area to a more basic source area around the Pliocene–Quaternary boundary. Input from the Emeishan LIP should account for this provenance change. Based on the provenance analysis of sediments in the Jianghan Basin, we infer that the Yangtze River developed into a large river with its drainage basin extended to the Emeishan LIP no later than the Pliocene–Quaternary boundary.

Latent tracks in polymeric etched track detectors

International Nuclear Information System (INIS)

Yamauchi, Tomoya

2013-01-01

Track registration properties in polymeric track detectors, including Poly(allyl diglycol carbonate), Bispenol A polycarbonate, Poly(ethylen terephtarate), and Polyimide, have been investigated by means of Fourie transform Infararede FT-IR spectrometry. Chemical criterion on the track formation threshold has been proposes, in stead of the conventional physical track registration models. (author)

Quality of Slab Track Construction - Track Alignment Design and Track Geometry

Science.gov (United States)

Šestáková, Janka

2015-05-01

The slab track superstructure design (without ballast) is a perspective construction especially for building tunnels and bridges in the modernized sections of railway tracks in Slovakia. Monitoring of the structure described in this article is focused on the transition areas between standard structure with ballast and slab track construction.

Solid state nuclear track detection: a useful geological/geophysical tool

International Nuclear Information System (INIS)

Khan, H.A.; Qureshi, A.A.

1994-01-01

Solid State Nuclear Track Detection (SSNTD) is a relatively new nuclear particle detection technique. Since its inception, it has found useful application in almost every branch of science. This paper gives a very brief review of the role it has played in solving some geological/geophysical problems. Since the technique has been found useful in a wide spectrum of geological/geophysical applications, it was simply not possible to discuss all of these in this paper due to severe space restrictions. However, an attempt has been made to discuss the salient features of some of the most prominent applications in the geological and geophysical sciences. The paper has been divided into two parts. Firstly, applications based on radon measurements by SSNTDs have been described. These include: Uranium/thorium and mineral exploration, search for geothermal energy sources, study of volcanic processes, location of geological faults and earthquake prediction, for example. Secondly, applications based on the study of spontaneous fission tracks in geological samples have been described briefly. The second group of applications includes: fission track dating (FTD) of geological samples, FTD in the study of emplacement times, provenance studies, and thermal histories of minerals. Necessary references have been provided for detailed studies of (a) the applications cited in this paper, and (b) other important geological/geophysical applications, which unfortunately could not be covered in the present paper. (author)

An Inference-Based Framework to Manage Data Provenance in Geoscience Applications

NARCIS (Netherlands)

Huq, M.R.; Apers, Peter M.G.; Wombacher, Andreas

2013-01-01

Data provenance allows scientists to validate their model as well as to investigate the origin of an unexpected value. Furthermore, it can be used as a replication recipe for output data products. However, capturing provenance requires enormous effort by scientists in terms of time and training.

Eye tracking a comprehensive guide to methods and measures

CERN Document Server

Holmqvist, Kenneth; Andersson, Richard; Dewhurst, Richard; Jarodzka, Halszka; Weijer, Joost van de

2011-01-01

We make 3-5 eye movements per second, and these movements are crucial in helping us deal with the vast amounts of information we encounter in our everyday lives. In recent years, thanks to the development of eye tracking technology, there has been a growing interest in monitoring and measuring these movements, with a view to understanding how we attend to and process the visual information we encounter Eye tracking as a research tool is now more accessible than ever, and is growing in popularity amongst researchers from a whole host of different disciplines. Usability analysts, sports scientists, cognitive psychologists, reading researchers, psycholinguists, neurophysiologists, electrical engineers, and others, all have a vested interest in eye tracking for different reasons. The ability to record eye-movements has helped advance our science and led to technological innovations. However, the growth of eye tracking in recent years has also presented a variety of challenges - in particular the issue of how to d...

Faulting and erosion in the Argentine Precordillera during changes in subduction regime: Reconciling bedrock cooling and detrital records

Science.gov (United States)

Fosdick, Julie C.; Carrapa, Barbara; Ortíz, Gustavo

2015-12-01

The Argentine Precordillera is an archetypal retroarc fold-and-thrust belt that records tectonics associated with changing subduction regimes. The interactions between exhumation and faulting in the Precordillera were investigated using apatite and zircon (U-Th-Sm)/He and apatite fission track thermochronometry from the Precordillera and adjacent geologic domains. Inverse modeling of thermal histories constrains eastward in-sequence rock cooling associated with deformation and erosion from 18 to 2 Ma across the Central Precordillera tracking thrusting during this time. The youngest AHe ages (5-2 Ma) and highest erosion rates are located in the eastern and western extremities of the Precordillera and indicate that recent denudation is concentrated at its structural boundaries. Moreover, synchronous rapid Pliocene cooling of the Frontal Cordillera, Eastern Precordillera, and Sierra del Valle Fértil was coeval with initiation of basement-involved faulting in the foreland. Detrital zircon U-Pb geochronology from the ca. 16-8.1 Ma Bermejo foreland basin strata suggests fluvial connectivity westward beyond the Frontal Cordillera to the Main Cordillera and Coast Range followed by an important shift in sediment provenance at ca. 10 Ma. At this time, we suggest that a substantial decrease in Permo-Triassic igneous sources in the Frontal Cordillera and concurrent increase in recycled zircons signatures of Paleozoic strata are best explained by uplift and erosion of the Precordillera during widening of the thrust-belt. Bedrock thermochronology and modeling indicate a 2-6 Myr lag time between faulting-related cooling in the hinterland and the detrital record of deformation in the foreland basin, suggesting that for tectonically active semi-arid settings, bedrock cooling may be more sensitive to onset of faulting. We suggest that high erosion rates in the Frontal Cordillera and Eastern Precordillera are associated with increased interplate coupling during shallowing of the

Detection of visually unrecognizable braking tracks using Laser-Induced Breakdown Spectroscopy, a feasibility study

Science.gov (United States)

Prochazka, David; Bilík, Martin; Prochazková, Petra; Brada, Michal; Klus, Jakub; Pořízka, Pavel; Novotný, Jan; Novotný, Karel; Ticová, Barbora; Bradáč, Albert; Semela, Marek; Kaiser, Jozef

2016-04-01

Identification of the position, length and mainly beginning of a braking track has proven to be essential for determination of causes of a road traffic accident. With the introduction of modern safety braking systems and assistance systems such as the Anti-lock Braking System (ABS) or Electronic Stability Control (ESC), the visual identification of braking tracks that has been used up until the present is proving to be rather complicated or even impossible. This paper focuses on identification of braking tracks using a spectrochemical analysis of the road surface. Laser-Induced Breakdown Spectroscopy (LIBS) was selected as a method suitable for fast in-situ element detection. In the course of detailed observations of braking tracks it was determined that they consist of small particles of tire treads that are caught in intrusions in the road surface. As regards detection of the "dust" resulting from wear and tear of tire treads in the environment, organic zinc was selected as the identification element in the past. The content of zinc in tire treads has been seen to differ with regard to various sources and tire types; however, the arithmetic mean and modus of these values are approximately 1% by weight. For in-situ measurements of actual braking tracks a mobile LIBS device equipped with a special module was used. Several measurements were performed for 3 different cars and tire types respectively which slowed down with full braking power. Moreover, the influence of different initial speed, vehicle mass and braking track length on detected signal is discussed here.

Middle-Upper Triassic and Middle Jurassic tetrapod track assemblages of southern Tunisia, Sahara Platform

Science.gov (United States)

Niedźwiedzki, Grzegorz; Soussi, Mohamed; Boukhalfa, Kamel; Gierliński, Gerard D.

2017-05-01

Three tetrapod track assemblages from the early-middle Mesozoic of southern Tunisia are reported. The strata exposed at the Tejra 2 clay-pit near the Medenine and Rehach site, located in the vicinity of Kirchaou, contain the first tetrapod tracks found in the Triassic of Tunisia. The Middle Jurassic (early Aalenian) dinosaur tracks are reported from the Mestaoua plain near Tataouine. In the Middle Triassic outcrop of the Tejra 2 clay-pit, tridactyl tracks of small and medium-sized dinosauromorphs, were discovered. These tracks represent the oldest evidence of dinosaur-lineage elements in the Triassic deposits of Tunisia. Similar tracks have been described from the Middle Triassic of Argentina, France and Morocco. An isolated set of the manus and pes of a quadrupedal tetrapod discovered in Late Triassic Rehach tracksite is referred to a therapsid tracemaker. The Middle Jurassic deposits of the Mestaoua plain reveal small and large tridactyl theropod dinosaur tracks (Theropoda track indet. A-C). Based on comparison with the abundant record of Triassic tetrapod ichnofossils from Europe and North America, the ichnofauna described here indicates the presence of a therapsid-dinosauromorph ichnoassociation (without typical Chirotheriidae tracks) in the Middle and Late Triassic, which sheds light on the dispersal of the Middle-Upper Triassic tetrapod ichnofaunas in this part of Gondwana. The reported Middle Jurassic ichnofauna show close similarities to dinosaur track assemblages from the Lower and Middle Jurassic of northwestern Africa, North America, Europe and also southeastern Asia. Sedimentological and lithostratigraphic data of each new tracksite have been defined on published data and new observations. Taken together, these discoveries present a tantalizing window into the evolutionary history of tetrapods from the Triassic and Jurassic of southern Tunisia. Given the limited early Mesozoic tetrapod record from the region, these discoveries are of both temporal and

Scientific Reproducibility in Biomedical Research: Provenance Metadata Ontology for Semantic Annotation of Study Description.

Science.gov (United States)

Sahoo, Satya S; Valdez, Joshua; Rueschman, Michael

2016-01-01

Scientific reproducibility is key to scientific progress as it allows the research community to build on validated results, protect patients from potentially harmful trial drugs derived from incorrect results, and reduce wastage of valuable resources. The National Institutes of Health (NIH) recently published a systematic guideline titled "Rigor and Reproducibility " for supporting reproducible research studies, which has also been accepted by several scientific journals. These journals will require published articles to conform to these new guidelines. Provenance metadata describes the history or origin of data and it has been long used in computer science to capture metadata information for ensuring data quality and supporting scientific reproducibility. In this paper, we describe the development of Provenance for Clinical and healthcare Research (ProvCaRe) framework together with a provenance ontology to support scientific reproducibility by formally modeling a core set of data elements representing details of research study. We extend the PROV Ontology (PROV-O), which has been recommended as the provenance representation model by World Wide Web Consortium (W3C), to represent both: (a) data provenance, and (b) process provenance. We use 124 study variables from 6 clinical research studies from the National Sleep Research Resource (NSRR) to evaluate the coverage of the provenance ontology. NSRR is the largest repository of NIH-funded sleep datasets with 50,000 studies from 36,000 participants. The provenance ontology reuses ontology concepts from existing biomedical ontologies, for example the Systematized Nomenclature of Medicine Clinical Terms (SNOMED CT), to model the provenance information of research studies. The ProvCaRe framework is being developed as part of the Big Data to Knowledge (BD2K) data provenance project.

Provenance variations of scots pine (Pinus sylvestris L.) in the Southern PART of Turkey

International Nuclear Information System (INIS)

Gulcu, S.; Bilir, N.

2015-01-01

Tree height, basal diameter, stem form, number, angle and diameter of branches were assessed in eight-year-old provenance test established by 30 seed sources of Scots pine (Pinus sylvestris L.) at Aydogmus and Kemer experimental sites of Southern part of Turkey. Growth of the provenances was also compared to two native species (Taurus cedar- Cedrus libani A. Rich and Black pine-Pinus nigra Arnold.) of the region. Variations within provenance and among provenances, and relations among the traits were estimated. There were large differences (p <= 0.05) within provenance and among provenances for the traits, while sites showed similar (0.05 <= p) performance for tree height and stem form. For instance, average of tree height was 181 cm and varied between 138.3 cm and 229.8 cm in provenances of Aydogmus site, it was 184 cm and ranged from 130 cm to 246.1 cm in that of Kemer site. Averages of tree height of a provenance were 144.4 cm in Aydogmus and 194.5 cm in Kemer. Individual tree height of the provenance varied between 69 cm and 267 cm, and ranged from 51 cm to 280 cm in sites. Averages of tree height were 143.2 cm in Black pine 145.6 cm in Taurus cedar which were natural species of the region. There were mostly positive and significant (p <= 0.05) correlations among the traits. Results of the study were discussed for new plantations and breeding of the species. (author)

Nonlinear control of ships minimizing the position tracking errors

Directory of Open Access Journals (Sweden)

Svein P. Berge

1999-07-01

Full Text Available In this paper, a nonlinear tracking controller with integral action for ships is presented. The controller is based on state feedback linearization. Exponential convergence of the vessel-fixed position and velocity errors are proven by using Lyapunov stability theory. Since we only have two control devices, a rudder and a propeller, we choose to control the longship and the sideship position errors to zero while the heading is stabilized indirectly. A Virtual Reference Point (VRP is defined at the bow or ahead of the ship. The VRP is used for tracking control. It is shown that the distance from the center of rotation to the VRP will influence on the stability of the zero dynamics. By selecting the VRP at the bow or even ahead of the bow, the damping in yaw can be increased and the zero dynamics is stabilized. Hence, the heading angle will be less sensitive to wind, currents and waves. The control law is simulated by using a nonlinear model of the Japanese training ship Shiojimaru with excellent results. Wind forces are added to demonstrate the robustness and performance of the integral controller.

Nonlinear Tracking Control of a Conductive Supercoiled Polymer Actuator.

Science.gov (United States)

Luong, Tuan Anh; Cho, Kyeong Ho; Song, Min Geun; Koo, Ja Choon; Choi, Hyouk Ryeol; Moon, Hyungpil

2018-04-01

Artificial muscle actuators made from commercial nylon fishing lines have been recently introduced and shown as a new type of actuator with high performance. However, the actuators also exhibit significant nonlinearities, which make them difficult to control, especially in precise trajectory-tracking applications. In this article, we present a nonlinear mathematical model of a conductive supercoiled polymer (SCP) actuator driven by Joule heating for model-based feedback controls. Our efforts include modeling of the hysteresis behavior of the actuator. Based on nonlinear modeling, we design a sliding mode controller for SCP actuator-driven manipulators. The system with proposed control law is proven to be asymptotically stable using the Lyapunov theory. The control performance of the proposed method is evaluated experimentally and compared with that of a proportional-integral-derivative (PID) controller through one-degree-of-freedom SCP actuator-driven manipulators. Experimental results show that the proposed controller's performance is superior to that of a PID controller, such as the tracking errors are nearly 10 times smaller compared with those of a PID controller, and it is more robust to external disturbances such as sensor noise and actuator modeling error.

Implementing chain of custody requirements in database audit records for forensic purposes

OpenAIRE

Flores Armas, Denys; Jhumka, Arshad

2017-01-01

During forensic database investigations, audit records become a crucial evidential element; particularly, when certain events can be attributed to insider activity. However, traditional reactive forensic methods may not be suitable, urging the adoption of proactive approaches that can be used to ensure accountability through audit records whilst satisfying Chain of Custody (CoC) requirements for forensic purposes. In this paper, role segregation, evidence provenance, event timeliness and caus...

LQCD workflow execution framework: Models, provenance and fault-tolerance

International Nuclear Information System (INIS)

Piccoli, Luciano; Simone, James N; Kowalkowlski, James B; Dubey, Abhishek

2010-01-01

Large computing clusters used for scientific processing suffer from systemic failures when operated over long continuous periods for executing workflows. Diagnosing job problems and faults leading to eventual failures in this complex environment is difficult, specifically when the success of an entire workflow might be affected by a single job failure. In this paper, we introduce a model-based, hierarchical, reliable execution framework that encompass workflow specification, data provenance, execution tracking and online monitoring of each workflow task, also referred to as participants. The sequence of participants is described in an abstract parameterized view, which is translated into a concrete data dependency based sequence of participants with defined arguments. As participants belonging to a workflow are mapped onto machines and executed, periodic and on-demand monitoring of vital health parameters on allocated nodes is enabled according to pre-specified rules. These rules specify conditions that must be true pre-execution, during execution and post-execution. Monitoring information for each participant is propagated upwards through the reflex and healing architecture, which consists of a hierarchical network of decentralized fault management entities, called reflex engines. They are instantiated as state machines or timed automatons that change state and initiate reflexive mitigation action(s) upon occurrence of certain faults. We describe how this cluster reliability framework is combined with the workflow execution framework using formal rules and actions specified within a structure of first order predicate logic that enables a dynamic management design that reduces manual administrative workload, and increases cluster-productivity.

PIXE study on the provenance of Chinese ancient porcelain

International Nuclear Information System (INIS)

Zhu, D.; Cheng, H.S.; Lin, J.W.; Yang, F.J.

2006-01-01

This paper reports the PIXE study on the provenance of Chinese ancient porcelain made in 7-10th century. The chemical compositions of Jun celadon samples made at Juntai, Linru and Hunyuan kilns, the white-glazed porcelain samples made at Ding, Huangye and Dangyangyu kilns, and the Ru celadon samples made at Qiangliang Temple were measured by external-beam PIXE, and the factor analysis was applied for identifying their provenances. Experimental results show that the porcelain products made at different kilns can be distinguished according to the compositional differences measured by PIXE

PIXE study on the provenance of Chinese ancient porcelain

Energy Technology Data Exchange (ETDEWEB)

Zhu, D. [Institute of Modern Physics, Fudan University, 220 Handan Road, Shanghai 200433 (China); Cheng, H.S. [Institute of Modern Physics, Fudan University, 220 Handan Road, Shanghai 200433 (China)]. E-mail: hscheng@fudan.edu.cn; Lin, J.W. [Institute of Modern Physics, Fudan University, 220 Handan Road, Shanghai 200433 (China); Yang, F.J. [Institute of Modern Physics, Fudan University, 220 Handan Road, Shanghai 200433 (China)

2006-08-15

This paper reports the PIXE study on the provenance of Chinese ancient porcelain made in 7-10th century. The chemical compositions of Jun celadon samples made at Juntai, Linru and Hunyuan kilns, the white-glazed porcelain samples made at Ding, Huangye and Dangyangyu kilns, and the Ru celadon samples made at Qiangliang Temple were measured by external-beam PIXE, and the factor analysis was applied for identifying their provenances. Experimental results show that the porcelain products made at different kilns can be distinguished according to the compositional differences measured by PIXE.

PIXE study on the provenance of Chinese ancient porcelain

Science.gov (United States)

Zhu, D.; Cheng, H. S.; Lin, J. W.; Yang, F. J.

2006-08-01

This paper reports the PIXE study on the provenance of Chinese ancient porcelain made in 7-10th century. The chemical compositions of Jun celadon samples made at Juntai, Linru and Hunyuan kilns, the white-glazed porcelain samples made at Ding, Huangye and Dangyangyu kilns, and the Ru celadon samples made at Qiangliang Temple were measured by external-beam PIXE, and the factor analysis was applied for identifying their provenances. Experimental results show that the porcelain products made at different kilns can be distinguished according to the compositional differences measured by PIXE.

Provenance and paleogeography of the Devonian Durazno Group, southern Parana Basin in Uruguay

Science.gov (United States)

Uriz, N. J.; Cingolani, C. A.; Basei, M. A. S.; Blanco, G.; Abre, P.; Portillo, N. S.; Siccardi, A.

2016-03-01

A succession of Devonian cover rocks occurs in outcrop and in the subsurface of central-northern Uruguay where they were deposited in an intracratonic basin. This Durazno Group comprises three distinct stratigraphic units, namely the Cerrezuelo, Cordobés and La Paloma formations. The Durazno Group does not exceed 300 m of average thickness and preserves a transgressive-regressive cycle within a shallow-marine siliciclastic shelf platform, and is characterized by an assemblage of invertebrate fossils of Malvinokaffric affinity especially within the Lower Devonian Cordobés shales. The sedimentary provenance of the Durazno Group was determined using petrography, geochemistry, and morphological studies of detrital zircons as well as their U-Pb ages. Sandstone petrography of Cerrezuelo and La Paloma sequences shows that they have a dominantly quartz-feldspathic composition with a minor contribution of other minerals. Whole-rock geochemical data indicate that alteration was strong in each of the three formations studied; chondritic-normalized REE patterns essentially parallel to PAAS, the presence of a negative Eu-anomaly, and Th/Sc and La/Hf ratios point to an average source composition similar to UCC or slightly more felsic. Within the Cerrezuelo Formation, recycling of older volcano-metasedimentary sources is interpreted from Zr/Sc ratios and high Hf, Zr, and REE concentrations. U-Pb detrital zircon age populations of the Cerrezuelo and La Paloma formations indicate that the principal source terranes are of Neoproterozoic age, but include also minor populations derived from Mesoproterozoic and Archean-Paleoproterozoic rocks. A provenance from the Cuchilla Dionisio-Dom Feliciano, Nico Pérez and Piedra Alta terranes of Uruguay and southern Brazil is likely. This study establishes an intracratonic extensional tectonic setting during Durazno time. Considering provenance age sources, regional paleocurrent distributions and the established orogenic history recorded in SW

Mineralogy of Nicobar Fan turbidites (IODP Leg 362): Himalayan provenance and diagenetic control.

Science.gov (United States)

Limonta, M.; Garzanti, E.; Ando, S.; Carter, A.; Milliken, K. L.; Pickering, K. T.

2017-12-01

In this study we use quantitative petrographic and heavy-mineral data on silt-sized and sand-sized sediments from the Nicobar Fan turbiditic depositional system to unravel their provenance and discriminate between pre-depositional and post-depositional processes controlling sediment mineralogy. Eighteen samples from the two drill sites U1480 e U1481, collected down to a depth of 1400 m during International Ocean Discovery Expedition 362, were selected for analysis. A complete section of the sedimentary section overlying oceanic basaltic basement was recovered at the U1480 drill site, whereas the U1481 drill site, located 35 km to the southeast, focused on the deeper interval of the sedimentary section overlying oceanic basement. Here we illustrate the compositional trends observed throughout the recovered succession, and compare heavy-mineral suites characterizing sediments drilled at the two U1480 and U1481 sites to check for potential differences in sediment provenance over a relatively short distance in trench settings. Diagenetic control with increasing burial depth was also specifically investigated. In Pleistocene sediments at depths of a few tens of meters only, rich heavy-mineral assemblages include mainly hornblende, epidote, and garnet, associated with apatite, clinopyroxene, tourmaline, sillimanite, kyanite, zircon, titanite, and rare staurolite and rutile, testifying to long-distance provenance from the Himalayan range via the Ganga-Brahmaputra fluvio-deltaic-turbiditic system. Heavy-mineral concentration shows a progressive decrease with burial depth, pointing to selective diagenetic dissolution of less durable detrital minerals. Clinopyroxene becomes rare below 400 m depth and was not recorded below 500 m depth, where amphibole decreases notably in relative abundance. More durable heavy minerals, including zircon, tourmaline, apatite, garnet and epidote, consequently tend to be relatively enriched with increasing age and burial depth. Petrographic and

Phytotracker, an information management system for easy recording and tracking of plants, seeds and plasmids.

Science.gov (United States)

Nieuwland, Jeroen; Sornay, Emily; Marchbank, Angela; de Graaf, Barend Hj; Murray, James Ah

2012-10-13

A large number of different plant lines are produced and maintained in a typical plant research laboratory, both as seed stocks and in active growth. These collections need careful and consistent management to track and maintain them properly, and this is a particularly pressing issue in laboratories undertaking research involving genetic manipulation due to regulatory requirements. Researchers and PIs need to access these data and collections, and therefore an easy-to-use plant-oriented laboratory information management system that implements, maintains and displays the information in a simple and visual format would be of great help in both the daily work in the lab and in ensuring regulatory compliance. Here, we introduce 'Phytotracker', a laboratory management system designed specifically to organise and track plasmids, seeds and growing plants that can be used in mixed platform environments. Phytotracker is designed with simplicity of user operation and ease of installation and management as the major factor, whilst providing tracking tools that cover the full range of activities in molecular genetics labs. It utilises the cross-platform Filemaker relational database, which allows it to be run as a stand-alone or as a server-based networked solution available across all workstations in a lab that can be internet accessible if desired. It can also be readily modified or customised further. Phytotracker provides cataloguing and search functions for plasmids, seed batches, seed stocks and plants growing in pots or trays, and allows tracking of each plant from seed sowing, through harvest to the new seed batch and can print appropriate labels at each stage. The system enters seed information as it is transferred from the previous harvest data, and allows both selfing and hybridization (crossing) to be defined and tracked. Transgenic lines can be linked to their plasmid DNA source. This ease of use and flexibility helps users to reduce their time needed to organise

Phytotracker, an information management system for easy recording and tracking of plants, seeds and plasmids

Directory of Open Access Journals (Sweden)

Nieuwland Jeroen

2012-10-01

Full Text Available Abstract Background A large number of different plant lines are produced and maintained in a typical plant research laboratory, both as seed stocks and in active growth. These collections need careful and consistent management to track and maintain them properly, and this is a particularly pressing issue in laboratories undertaking research involving genetic manipulation due to regulatory requirements. Researchers and PIs need to access these data and collections, and therefore an easy-to-use plant-oriented laboratory information management system that implements, maintains and displays the information in a simple and visual format would be of great help in both the daily work in the lab and in ensuring regulatory compliance. Results Here, we introduce ‘Phytotracker’, a laboratory management system designed specifically to organise and track plasmids, seeds and growing plants that can be used in mixed platform environments. Phytotracker is designed with simplicity of user operation and ease of installation and management as the major factor, whilst providing tracking tools that cover the full range of activities in molecular genetics labs. It utilises the cross-platform Filemaker relational database, which allows it to be run as a stand-alone or as a server-based networked solution available across all workstations in a lab that can be internet accessible if desired. It can also be readily modified or customised further. Phytotracker provides cataloguing and search functions for plasmids, seed batches, seed stocks and plants growing in pots or trays, and allows tracking of each plant from seed sowing, through harvest to the new seed batch and can print appropriate labels at each stage. The system enters seed information as it is transferred from the previous harvest data, and allows both selfing and hybridization (crossing to be defined and tracked. Transgenic lines can be linked to their plasmid DNA source. This ease of use and flexibility

Parameter Deduction and Accuracy Analysis of Track Beam Curves in Straddle-type Monorail Systems

Directory of Open Access Journals (Sweden)

Xiaobo Zhao

2015-12-01

Full Text Available The accuracy of the bottom curve of a PC track beam is strongly related to the production quality of the entire beam. Many factors may affect the parameters of the bottom curve, such as the superelevation of the curve and the deformation of a PC track beam. At present, no effective method has been developed to determine the bottom curve of a PC track beam; therefore, a new technique is presented in this paper to deduce the parameters of such a curve and to control the accuracy of the computation results. First, the domain of the bottom curve of a PC track beam is assumed to be a spindle plane. Then, the corresponding supposed top curve domain is determined based on a geometrical relationship that is the opposite of that identified by the conventional method. Second, several optimal points are selected from the supposed top curve domain according to the dichotomy algorithm; the supposed top curve is thus generated by connecting these points. Finally, one rigorous criterion is established in the fractal dimension to assess the accuracy of the assumed top curve deduced in the previous step. If this supposed curve coincides completely with the known top curve, then the assumed bottom curve corresponding to the assumed top curve is considered to be the real bottom curve. This technique of determining the bottom curve of a PC track beam is thus proven to be efficient and accurate.

Improvements to ATLAS Track Reconstruction for Run-II

CERN Document Server

Cairo, Valentina Maria; The ATLAS collaboration

2015-01-01

Run-II of the LHC will provide new challenges to track and vertex reconstruction with higher energies, denser jets and higher rates. In addition, the Insertable B-layer (IBL) is a fourth pixel layer, which has been inserted at the centre of ATLAS during the shutdown of the LHC. We will discuss improvements to track reconstruction developed during the two year shutdown of the LHC. These include novel techniques developed to improve the performance in the dense cores of jets, optimisation for the expected conditions, and a big software campaign which lead to more than a factor of three decrease in the CPU time needed to process each recorded event.

CMS Tracking Performance Results from Early LHC Operation

CERN Document Server

Khachatryan, Vardan; Tumasyan, Armen; Adam, Wolfgang; Bergauer, Thomas; Dragicevic, Marko; Erö, Janos; Fabjan, Christian; Friedl, Markus; Fruehwirth, Rudolf; Ghete, Vasile Mihai; Hammer, Josef; Haensel, Stephan; Hoch, Michael; Hörmann, Natascha; Hrubec, Josef; Jeitler, Manfred; Kasieczka, Gregor; Kiesenhofer, Wolfgang; Krammer, Manfred; Liko, Dietrich; Mikulec, Ivan; Pernicka, Manfred; Rohringer, Herbert; Schöfbeck, Robert; Strauss, Josef; Taurok, Anton; Teischinger, Florian; Waltenberger, Wolfgang; Walzel, Gerhard; Widl, Edmund; Wulz, Claudia-Elisabeth; Mossolov, Vladimir; Shumeiko, Nikolai; Suarez Gonzalez, Juan; Benucci, Leonardo; Ceard, Ludivine; De Wolf, Eddi A.; Janssen, Xavier; Maes, Thomas; Mucibello, Luca; Ochesanu, Silvia; Roland, Benoit; Rougny, Romain; Selvaggi, Michele; Van Haevermaet, Hans; Van Mechelen, Pierre; Van Remortel, Nick; Adler, Volker; Beauceron, Stephanie; Blyweert, Stijn; D'Hondt, Jorgen; Devroede, Olivier; Kalogeropoulos, Alexis; Maes, Joris; Maes, Michael; Tavernier, Stefaan; Van Doninck, Walter; Van Mulders, Petra; Villella, Ilaria; Chabert, Eric Christian; Charaf, Otman; Clerbaux, Barbara; De Lentdecker, Gilles; Dero, Vincent; Gay, Arnaud; Hammad, Gregory Habib; Marage, Pierre Edouard; Vander Velde, Catherine; Vanlaer, Pascal; Wickens, John; Costantini, Silvia; Grunewald, Martin; Klein, Benjamin; Marinov, Andrey; Ryckbosch, Dirk; Thyssen, Filip; Tytgat, Michael; Vanelderen, Lukas; Verwilligen, Piet; Walsh, Sinead; Zaganidis, Nicolas; Basegmez, Suzan; Bruno, Giacomo; Caudron, Julien; De Favereau De Jeneret, Jerome; Delaere, Christophe; Demin, Pavel; Favart, Denis; Giammanco, Andrea; Grégoire, Ghislain; Hollar, Jonathan; Lemaitre, Vincent; Militaru, Otilia; Ovyn, Severine; Pagano, Davide; Pin, Arnaud; Piotrzkowski, Krzysztof; Quertenmont, Loic; Schul, Nicolas; Beliy, Nikita; Caebergs, Thierry; Daubie, Evelyne; Alves, Gilvan; Pol, Maria Elena; Henrique Gomes E Souza, Moacyr; Carvalho, Wagner; Da Costa, Eliza Melo; De Jesus Damiao, Dilson; De Oliveira Martins, Carley; Fonseca De Souza, Sandro; Mundim, Luiz; Nogima, Helio; Oguri, Vitor; Santoro, Alberto; Silva Do Amaral, Sheila Mara; Sznajder, Andre; Torres Da Silva De Araujo, Felipe; De Almeida Dias, Flavia; Ferreira Dias, Marco Andre; Tomei, Thiago; De Moraes Gregores, Eduardo; Da Cunha Marinho, Franciole; Novaes, Sergio F.; Padula, Sandra; Darmenov, Nikolay; Dimitrov, Lubomir; Genchev, Vladimir; Iaydjiev, Plamen; Piperov, Stefan; Stoykova, Stefka; Sultanov, Georgi; Trayanov, Rumen; Vankov, Ivan; Dyulendarova, Milena; Hadjiiska, Roumyana; Kozhuharov, Venelin; Litov, Leander; Marinova, Evelina; Mateev, Matey; Pavlov, Borislav; Petkov, Peicho; Bian, Jian-Guo; Chen, Guo-Ming; Chen, He-Sheng; Jiang, Chun-Hua; Liang, Dong; Liang, Song; Wang, Jian; Wang, Jian; Wang, Xianyou; Wang, Zheng; Yang, Min; Zang, Jingjing; Zhang, Zhen; Ban, Yong; Guo, Shuang; Hu, Zhen; Mao, Yajun; Qian, Si-Jin; Teng, Haiyun; Zhu, Bo; Cabrera, Andrés; Carrillo Montoya, Camilo Andres; Gomez Moreno, Bernardo; Ocampo Rios, Alberto Andres; Osorio Oliveros, Andres Felipe; Sanabria, Juan Carlos; Godinovic, Nikola; Lelas, Damir; Lelas, Karlo; Plestina, Roko; Polic, Dunja; Puljak, Ivica; Antunovic, Zeljko; Dzelalija, Mile; Brigljevic, Vuko; Duric, Senka; Kadija, Kreso; Morovic, Srecko; Attikis, Alexandros; Fereos, Reginos; Galanti, Mario; Mousa, Jehad; Nicolaou, Charalambos; Ptochos, Fotios; Razis, Panos A.; Rykaczewski, Hans; Mahmoud, Mohammed; Hektor, Andi; Kadastik, Mario; Kannike, Kristjan; Müntel, Mait; Raidal, Martti; Rebane, Liis; Azzolini, Virginia; Eerola, Paula; Czellar, Sandor; Härkönen, Jaakko; Heikkinen, Mika Aatos; Karimäki, Veikko; Kinnunen, Ritva; Klem, Jukka; Kortelainen, Matti J.; Lampén, Tapio; Lassila-Perini, Kati; Lehti, Sami; Lindén, Tomas; Luukka, Panja-Riina; Mäenpää, Teppo; Sarkar, Subir; Tuominen, Eija; Tuominiemi, Jorma; Tuovinen, Esa; Ungaro, Donatella; Wendland, Lauri; Banzuzi, Kukka; Korpela, Arja; Tuuva, Tuure; Sillou, Daniel; Besancon, Marc; Dejardin, Marc; Denegri, Daniel; Descamps, Julien; Fabbro, Bernard; Faure, Jean-Louis; Ferri, Federico; Ganjour, Serguei; Gentit, François-Xavier; Givernaud, Alain; Gras, Philippe; Hamel de Monchenault, Gautier; Jarry, Patrick; Locci, Elizabeth; Malcles, Julie; Marionneau, Matthieu; Millischer, Laurent; Rander, John; Rosowsky, André; Rousseau, Delphine; Titov, Maksym; Verrecchia, Patrice; Baffioni, Stephanie; Bianchini, Lorenzo; Bluj, Michal; Broutin, Clementine; Busson, Philippe; Charlot, Claude; Dobrzynski, Ludwik; Elgammal, Sherif; Granier de Cassagnac, Raphael; Haguenauer, Maurice; Kalinowski, Artur; Miné, Philippe; Paganini, Pascal; Sabes, David; Sirois, Yves; Thiebaux, Christophe; Zabi, Alexandre; Agram, Jean-Laurent; Besson, Auguste; Bloch, Daniel; Bodin, David; Brom, Jean-Marie; Cardaci, Marco; Conte, Eric; Drouhin, Frédéric; Ferro, Cristina; Fontaine, Jean-Charles; Gelé, Denis; Goerlach, Ulrich; Greder, Sebastien; Juillot, Pierre; Karim, Mehdi; Le Bihan, Anne-Catherine; Mikami, Yoshinari; Speck, Joaquim; Van Hove, Pierre; Fassi, Farida; Mercier, Damien; Baty, Clement; Beaupere, Nicolas; Bedjidian, Marc; Bondu, Olivier; Boudoul, Gaelle; Boumediene, Djamel; Brun, Hugues; Chanon, Nicolas; Chierici, Roberto; Contardo, Didier; Depasse, Pierre; El Mamouni, Houmani; Fay, Jean; Gascon, Susan; Ille, Bernard; Kurca, Tibor; Le Grand, Thomas; Lethuillier, Morgan; Mirabito, Laurent; Perries, Stephane; Sordini, Viola; Tosi, Silvano; Tschudi, Yohann; Verdier, Patrice; Xiao, Hong; Roinishvili, Vladimir; Anagnostou, Georgios; Edelhoff, Matthias; Feld, Lutz; Heracleous, Natalie; Hindrichs, Otto; Jussen, Ruediger; Klein, Katja; Merz, Jennifer; Mohr, Niklas; Ostapchuk, Andrey; Perieanu, Adrian; Raupach, Frank; Sammet, Jan; Schael, Stefan; Sprenger, Daniel; Weber, Hendrik; Weber, Martin; Wittmer, Bruno; Actis, Oxana; Ata, Metin; Bender, Walter; Biallass, Philipp; Erdmann, Martin; Frangenheim, Jens; Hebbeker, Thomas; Hinzmann, Andreas; Hoepfner, Kerstin; Hof, Carsten; Kirsch, Matthias; Klimkovich, Tatsiana; Kreuzer, Peter; Lanske, Dankfried; Magass, Carsten; Merschmeyer, Markus; Meyer, Arnd; Papacz, Paul; Pieta, Holger; Reithler, Hans; Schmitz, Stefan Antonius; Sonnenschein, Lars; Sowa, Michael; Steggemann, Jan; Teyssier, Daniel; Zeidler, Clemens; Bontenackels, Michael; Davids, Martina; Duda, Markus; Flügge, Günter; Geenen, Heiko; Giffels, Manuel; Haj Ahmad, Wael; Heydhausen, Dirk; Kress, Thomas; Kuessel, Yvonne; Linn, Alexander; Nowack, Andreas; Perchalla, Lars; Pooth, Oliver; Sauerland, Philip; Stahl, Achim; Thomas, Maarten; Tornier, Daiske; Zoeller, Marc Henning; Aldaya Martin, Maria; Behrenhoff, Wolf; Behrens, Ulf; Bergholz, Matthias; Borras, Kerstin; Campbell, Alan; Castro, Elena; Dammann, Dirk; Eckerlin, Guenter; Flossdorf, Alexander; Flucke, Gero; Geiser, Achim; Hauk, Johannes; Jung, Hannes; Kasemann, Matthias; Katkov, Igor; Kleinwort, Claus; Kluge, Hannelies; Knutsson, Albert; Kuznetsova, Ekaterina; Lange, Wolfgang; Lohmann, Wolfgang; Mankel, Rainer; Marienfeld, Markus; Melzer-Pellmann, Isabell-Alissandra; Meyer, Andreas Bernhard; Mnich, Joachim; Mussgiller, Andreas; Olzem, Jan; Parenti, Andrea; Raspereza, Alexei; Schmidt, Ringo; Schoerner-Sadenius, Thomas; Sen, Niladri; Stein, Matthias; Tomaszewska, Justyna; Volyanskyy, Dmytro; Wissing, Christoph; Autermann, Christian; Bobrovskyi, Sergei; Draeger, Jula; Eckstein, Doris; Enderle, Holger; Gebbert, Ulla; Kaschube, Kolja; Kaussen, Gordon; Klanner, Robert; Mura, Benedikt; Naumann-Emme, Sebastian; Nowak, Friederike; Pietsch, Niklas; Sander, Christian; Schettler, Hannes; Schleper, Peter; Schröder, Matthias; Schum, Torben; Schwandt, Joern; Srivastava, Ajay Kumar; Stadie, Hartmut; Steinbrück, Georg; Thomsen, Jan; Wolf, Roger; Bauer, Julia; Buege, Volker; Cakir, Altan; Chwalek, Thorsten; Daeuwel, Daniel; De Boer, Wim; Dierlamm, Alexander; Dirkes, Guido; Feindt, Michael; Gruschke, Jasmin; Hackstein, Christoph; Hartmann, Frank; Heinrich, Michael; Held, Hauke; Hoffmann, Karl-Heinz; Honc, Simon; Kuhr, Thomas; Martschei, Daniel; Mueller, Steffen; Müller, Thomas; Niegel, Martin; Oberst, Oliver; Oehler, Andreas; Ott, Jochen; Peiffer, Thomas; Piparo, Danilo; Quast, Gunter; Rabbertz, Klaus; Ratnikov, Fedor; Renz, Manuel; Sabellek, Andreas; Saout, Christophe; Scheurer, Armin; Schieferdecker, Philipp; Schilling, Frank-Peter; Schott, Gregory; Simonis, Hans-Jürgen; Stober, Fred-Markus Helmut; Troendle, Daniel; Wagner-Kuhr, Jeannine; Zeise, Manuel; Zhukov, Valery; Ziebarth, Eva Barbara; Daskalakis, Georgios; Geralis, Theodoros; Kyriakis, Aristotelis; Loukas, Demetrios; Manolakos, Ioannis; Markou, Athanasios; Markou, Christos; Mavrommatis, Charalampos; Petrakou, Eleni; Gouskos, Loukas; Katsas, Panagiotis; Panagiotou, Apostolos; Evangelou, Ioannis; Kokkas, Panagiotis; Manthos, Nikolaos; Papadopoulos, Ioannis; Patras, Vaios; Triantis, Frixos A.; Aranyi, Attila; Bencze, Gyorgy; Boldizsar, Laszlo; Debreczeni, Gergely; Hajdu, Csaba; Horvath, Dezso; Kapusi, Anita; Krajczar, Krisztian; Laszlo, Andras; Sikler, Ferenc; Vesztergombi, Gyorgy; Beni, Noemi; Molnar, Jozsef; Palinkas, Jozsef; Szillasi, Zoltan; Veszpremi, Viktor; Raics, Peter; Trocsanyi, Zoltan Laszlo; Ujvari, Balazs; Bansal, Sunil; Beri, Suman Bala; Bhatnagar, Vipin; Jindal, Monika; Kaur, Manjit; Kohli, Jatinder Mohan; Mehta, Manuk Zubin; Nishu, Nishu; Saini, Lovedeep Kaur; Sharma, Archana; Sharma, Richa; Singh, Anil; Singh, Jas Bir; Singh, Supreet Pal; Ahuja, Sudha; Chauhan, Sushil; Choudhary, Brajesh C.; Gupta, Pooja; Jain, Sandhya; Jain, Shilpi; Kumar, Ashok; Ranjan, Kirti; Shivpuri, Ram Krishen; Choudhury, Rajani Kant; Dutta, Dipanwita; Kailas, Swaminathan; Kataria, Sushil Kumar; Mohanty, Ajit Kumar; Pant, Lalit Mohan; Shukla, Prashant; Suggisetti, Praveenkumar; Aziz, Tariq; Guchait, Monoranjan; Gurtu, Atul; Maity, Manas; Majumder, Devdatta; Majumder, Gobinda; Mazumdar, Kajari; Mohanty, Gagan Bihari; Saha, Anirban; Sudhakar, Katta; Wickramage, Nadeesha; Banerjee, Sudeshna; Dugad, Shashikant; Mondal, Naba Kumar; Arfaei, Hessamaddin; Bakhshiansohi, Hamed; Fahim, Ali; Hashemi, Majid; Jafari, Abideh; Mohammadi Najafabadi, Mojtaba; Paktinat Mehdiabadi, Saeid; Safarzadeh, Batool; Zeinali, Maryam; Abbrescia, Marcello; Barbone, Lucia; Colaleo, Anna; Creanza, Donato; De Filippis, Nicola; De Palma, Mauro; Dimitrov, Anton; Fedele, Francesca; Fiore, Luigi; Iaselli, Giuseppe; Lusito, Letizia; Maggi, Giorgio; Maggi, Marcello; Manna, Norman; Marangelli, Bartolomeo; My, Salvatore; Nuzzo, Salvatore; Pierro, Giuseppe Antonio; Pompili, Alexis; Pugliese, Gabriella; Romano, Francesco; Roselli, Giuseppe; Selvaggi, Giovanna; Silvestris, Lucia; Trentadue, Raffaello; Tupputi, Salvatore; Zito, Giuseppe; Abbiendi, Giovanni; Benvenuti, Alberto; Bonacorsi, Daniele; Braibant-Giacomelli, Sylvie; Capiluppi, Paolo; Castro, Andrea; Cavallo, Francesca Romana; Codispoti, Giuseppe; Cuffiani, Marco; Dallavalle, Gaetano-Marco; Fabbri, Fabrizio; Fanfani, Alessandra; Fasanella, Daniele; Giacomelli, Paolo; Giunta, Marina; Marcellini, Stefano; Masetti, Gianni; Montanari, Alessandro; Navarria, Francesco; Odorici, Fabrizio; Perrotta, Andrea; Rossi, Antonio; Rovelli, Tiziano; Siroli, Gianni; Albergo, Sebastiano; Cappello, Gigi; Chiorboli, Massimiliano; Costa, Salvatore; Tricomi, Alessia; Tuve, Cristina; Barbagli, Giuseppe; Broccolo, Giuseppe; Ciulli, Vitaliano; Civinini, Carlo; D'Alessandro, Raffaello; Focardi, Ettore; Frosali, Simone; Gallo, Elisabetta; Genta, Chiara; Lenzi, Piergiulio; Meschini, Marco; Paoletti, Simone; Sguazzoni, Giacomo; Tropiano, Antonio; Benussi, Luigi; Bianco, Stefano; Colafranceschi, Stefano; Fabbri, Franco; Piccolo, Davide; Fabbricatore, Pasquale; Musenich, Riccardo; Benaglia, Andrea; Cerati, Giuseppe Benedetto; De Guio, Federico; Di Matteo, Leonardo; Ghezzi, Alessio; Govoni, Pietro; Malberti, Martina; Malvezzi, Sandra; Martelli, Arabella; Massironi, Andrea; Menasce, Dario; Miccio, Vincenzo; Moroni, Luigi; Negri, Pietro; Paganoni, Marco; Pedrini, Daniele; Ragazzi, Stefano; Redaelli, Nicola; Sala, Silvano; Salerno, Roberto; Tabarelli de Fatis, Tommaso; Tancini, Valentina; Taroni, Silvia; Buontempo, Salvatore; Cimmino, Anna; De Cosa, Annapaola; De Gruttola, Michele; Fabozzi, Francesco; Iorio, Alberto Orso Maria; Lista, Luca; Noli, Pasquale; Paolucci, Pierluigi; Azzi, Patrizia; Bacchetta, Nicola; Bellan, Paolo; Bisello, Dario; Carlin, Roberto; Checchia, Paolo; Conti, Enrico; De Mattia, Marco; Dorigo, Tommaso; Dosselli, Umberto; Fanzago, Federica; Gasparini, Fabrizio; Gasparini, Ugo; Giubilato, Piero; Gresele, Ambra; Lacaprara, Stefano; Lazzizzera, Ignazio; Margoni, Martino; Mazzucato, Mirco; Meneguzzo, Anna Teresa; Perrozzi, Luca; Pozzobon, Nicola; Ronchese, Paolo; Simonetto, Franco; Torassa, Ezio; Tosi, Mia; Vanini, Sara; Zotto, Pierluigi; Zumerle, Gianni; Baesso, Paolo; Berzano, Umberto; Riccardi, Cristina; Torre, Paola; Vitulo, Paolo; Viviani, Claudio; Biasini, Maurizio; Bilei, Gian Mario; Caponeri, Benedetta; Fanò, Livio; Lariccia, Paolo; Lucaroni, Andrea; Mantovani, Giancarlo; Menichelli, Mauro; Nappi, Aniello; Santocchia, Attilio; Servoli, Leonello; Valdata, Marisa; Volpe, Roberta; Azzurri, Paolo; Bagliesi, Giuseppe; Bernardini, Jacopo; Boccali, Tommaso; Castaldi, Rino; D'Agnolo, Raffaele Tito; Dell'Orso, Roberto; Fiori, Francesco; Foà, Lorenzo; Giassi, Alessandro; Kraan, Aafke; Ligabue, Franco; Lomtadze, Teimuraz; Martini, Luca; Messineo, Alberto; Palla, Fabrizio; Palmonari, Francesco; Segneri, Gabriele; Serban, Alin Titus; Spagnolo, Paolo; Tenchini, Roberto; Tonelli, Guido; Venturi, Andrea; Verdini, Piero Giorgio; Barone, Luciano; Cavallari, Francesca; Del Re, Daniele; Di Marco, Emanuele; Diemoz, Marcella; Franci, Daniele; Grassi, Marco; Longo, Egidio; Organtini, Giovanni; Palma, Alessandro; Pandolfi, Francesco; Paramatti, Riccardo; Rahatlou, Shahram; Amapane, Nicola; Arcidiacono, Roberta; Argiro, Stefano; Arneodo, Michele; Biino, Cristina; Botta, Cristina; Cartiglia, Nicolo; Castello, Roberto; Costa, Marco; Demaria, Natale; Graziano, Alberto; Mariotti, Chiara; Marone, Matteo; Maselli, Silvia; Migliore, Ernesto; Mila, Giorgia; Monaco, Vincenzo; Musich, Marco; Obertino, Maria Margherita; Pastrone, Nadia; Pelliccioni, Mario; Romero, Alessandra; Ruspa, Marta; Sacchi, Roberto; Solano, Ada; Staiano, Amedeo; Trocino, Daniele; Vilela Pereira, Antonio; Ambroglini, Filippo; Belforte, Stefano; Cossutti, Fabio; Della Ricca, Giuseppe; Gobbo, Benigno; Montanino, Damiana; Penzo, Aldo; Kim, Hyunsoo; Chang, Sunghyun; Chung, Jin Hyuk; Kim, Dong Hee; Kim, Gui Nyun; Kim, Ji Eun; Kong, Dae Jung; Park, Hyangkyu; Son, Dohhee; Son, Dong-Chul; Kim, Jaeho; Kim, Jae Yool; Song, Sanghyeon; Choi, Suyong; Hong, Byung-Sik; Kim, Hyunchul; Kim, Ji Hyun; Kim, Tae Jeong; Lee, Kyong Sei; Moon, Dong Ho; Park, Sung Keun; Rhee, Han-Bum; Sim, Kwang Souk; Choi, Minkyoo; Kang, Seokon; Kim, Hyunyong; Park, Chawon; Park, Inkyu; Park, Sangnam; Choi, Young-Il; Choi, Young Kyu; Goh, Junghwan; Lee, Jongseok; Lee, Sungeun; Seo, Hyunkwan; Yu, Intae; Janulis, Mindaugas; Martisiute, Dalia; Petrov, Pavel; Sabonis, Tomas; Carrillo Moreno, Salvador; Salazar Ibarguen, Humberto Antonio; Casimiro Linares, Edgar; Morelos Pineda, Antonio; Reyes-Santos, Marco A.; Allfrey, Philip; Krofcheck, David; Tam, Jason; Butler, Philip H.; Signal, Tony; Williams, Jennifer C.; Ahmad, Muhammad; Ahmed, Ijaz; Asghar, Muhammad Irfan; Hoorani, Hafeez R.; Khan, Wajid Ali; Khurshid, Taimoor; Qazi, Shamona; Cwiok, Mikolaj; Dominik, Wojciech; Doroba, Krzysztof; Konecki, Marcin; Krolikowski, Jan; Frueboes, Tomasz; Gokieli, Ryszard; Górski, Maciej; Kazana, Malgorzata; Nawrocki, Krzysztof; Szleper, Michal; Wrochna, Grzegorz; Zalewski, Piotr; Almeida, Nuno; David Tinoco Mendes, Andre; Faccioli, Pietro; Ferreira Parracho, Pedro Guilherme; Gallinaro, Michele; Sá Martins, Pedro; Mini, Giuliano; Musella, Pasquale; Nayak, Aruna; Raposo, Luis; Ribeiro, Pedro Quinaz; Seixas, Joao; Silva, Pedro; Soares, David; Varela, Joao; Wöhri, Hermine Katharina; Belotelov, Ivan; Bunin, Pavel; Finger, Miroslav; Finger Jr., Michael; Golutvin, Igor; Kamenev, Alexey; Karjavin, Vladimir; Kozlov, Guennady; Lanev, Alexander; Moisenz, Petr; Palichik, Vladimir; Perelygin, Victor; Shmatov, Sergey; Smirnov, Vitaly; Volodko, Anton; Zarubin, Anatoli; Bondar, Nikolai; Golovtsov, Victor; Ivanov, Yury; Kim, Victor; Levchenko, Petr; Smirnov, Igor; Sulimov, Valentin; Uvarov, Lev; Vavilov, Sergey; Vorobyev, Alexey; Andreev, Yuri; Gninenko, Sergei; Golubev, Nikolai; Kirsanov, Mikhail; Krasnikov, Nikolai; Matveev, Viktor; Pashenkov, Anatoli; Toropin, Alexander; Troitsky, Sergey; Epshteyn, Vladimir; Gavrilov, Vladimir; Lychkovskaya, Natalia; Kaftanov, Vitali; Kossov, Mikhail; Krokhotin, Andrey; Kuleshov, Sergey; Oulianov, Alexei; Safronov, Grigory; Semenov, Sergey; Shreyber, Irina; Stolin, Viatcheslav; Vlasov, Evgueni; Zhokin, Alexander; Boos, Edouard; Dubinin, Mikhail; Dudko, Lev; Ershov, Alexander; Gribushin, Andrey; Kodolova, Olga; Lokhtin, Igor; Obraztsov, Stepan; Petrushanko, Sergey; Sarycheva, Ludmila; Savrin, Viktor; Snigirev, Alexander; Andreev, Vladimir; Dremin, Igor; Kirakosyan, Martin; Rusakov, Sergey V.; Vinogradov, Alexey; Azhgirey, Igor; Bitioukov, Sergei; Datsko, Kirill; Grishin, Viatcheslav; Kachanov, Vassili; Konstantinov, Dmitri; Krychkine, Victor; Petrov, Vladimir; Ryutin, Roman; Slabospitsky, Sergey; Sobol, Andrei; Sytine, Alexandre; Tourtchanovitch, Leonid; Troshin, Sergey; Tyurin, Nikolay; Uzunian, Andrey; Volkov, Alexey; Adzic, Petar; Djordjevic, Milos; Krpic, Dragomir; Maletic, Dimitrije; Milosevic, Jovan; Puzovic, Jovan; Aguilar-Benitez, Manuel; Alcaraz Maestre, Juan; Arce, Pedro; Battilana, Carlo; Calvo, Enrique; Cepeda, Maria; Cerrada, Marcos; Chamizo Llatas, Maria; Colino, Nicanor; De La Cruz, Begona; Diez Pardos, Carmen; Fernandez Bedoya, Cristina; Fernández Ramos, Juan Pablo; Ferrando, Antonio; Flix, Jose; Fouz, Maria Cruz; Garcia-Abia, Pablo; Gonzalez Lopez, Oscar; Goy Lopez, Silvia; Hernandez, Jose M.; Josa, Maria Isabel; Merino, Gonzalo; Puerta Pelayo, Jesus; Redondo, Ignacio; Romero, Luciano; Santaolalla, Javier; Willmott, Carlos; Albajar, Carmen; de Trocóniz, Jorge F; Cuevas, Javier; Fernandez Menendez, Javier; Gonzalez Caballero, Isidro; Lloret Iglesias, Lara; Vizan Garcia, Jesus Manuel; Cabrillo, Iban Jose; Calderon, Alicia; Chuang, Shan-Huei; Diaz Merino, Irma; Diez Gonzalez, Carlos; Duarte Campderros, Jordi; Fernandez, Marcos; Gomez, Gervasio; Gonzalez Sanchez, Javier; Gonzalez Suarez, Rebeca; Jorda, Clara; Lobelle Pardo, Patricia; Lopez Virto, Amparo; Marco, Jesus; Marco, Rafael; Martinez Rivero, Celso; Martinez Ruiz del Arbol, Pablo; Matorras, Francisco; Rodrigo, Teresa; Ruiz Jimeno, Alberto; Scodellaro, Luca; Sobron Sanudo, Mar; Vila, Ivan; Vilar Cortabitarte, Rocio; Abbaneo, Duccio; Auffray, Etiennette; Baillon, Paul; Ball, Austin; Barney, David; Beaudette, Florian; Bell, Alan James; Benedetti, Daniele; Bernet, Colin; Bialas, Wojciech; Bloch, Philippe; Bocci, Andrea; Bolognesi, Sara; Breuker, Horst; Brona, Grzegorz; Bunkowski, Karol; Camporesi, Tiziano; Cano, Eric; Cattai, Ariella; Cerminara, Gianluca; Christiansen, Tim; Coarasa Perez, Jose Antonio; Covarelli, Roberto; Curé, Benoît; Dahms, Torsten; De Roeck, Albert; Elliott-Peisert, Anna; Funk, Wolfgang; Gaddi, Andrea; Gennai, Simone; Gerwig, Hubert; Gigi, Dominique; Gill, Karl; Giordano, Domenico; Glege, Frank; Gomez-Reino Garrido, Robert; Gowdy, Stephen; Guiducci, Luigi; Hansen, Magnus; Hartl, Christian; Harvey, John; Hegner, Benedikt; Henderson, Conor; Hoffmann, Hans Falk; Honma, Alan; Innocente, Vincenzo; Janot, Patrick; Lecoq, Paul; Leonidopoulos, Christos; Lourenco, Carlos; Macpherson, Alick; Maki, Tuula; Malgeri, Luca; Mannelli, Marcello; Masetti, Lorenzo; Meijers, Frans; Mersi, Stefano; Meschi, Emilio; Moser, Roland; Mozer, Matthias Ulrich; Mulders, Martijn; Nesvold, Erik; Orsini, Luciano; Perez, Emmanuelle; Petrilli, Achille; Pfeiffer, Andreas; Pierini, Maurizio; Pimiä, Martti; Racz, Attila; Rolandi, Gigi; Rovelli, Chiara; Rovere, Marco; Sakulin, Hannes; Schäfer, Christoph; Schwick, Christoph; Segoni, Ilaria; Sharma, Archana; Siegrist, Patrice; Simon, Michal; Sphicas, Paraskevas; Spiga, Daniele; Spiropulu, Maria; Stöckli, Fabian; Stoye, Markus; Tropea, Paola; Tsirou, Andromachi; Veres, Gabor Istvan; Vichoudis, Paschalis; Voutilainen, Mikko; Zeuner, Wolfram Dietrich; Bertl, Willi; Deiters, Konrad; Erdmann, Wolfram; Gabathuler, Kurt; Horisberger, Roland; Ingram, Quentin; Kaestli, Hans-Christian; König, Stefan; Kotlinski, Danek; Langenegger, Urs; Meier, Frank; Renker, Dieter; Rohe, Tilman; Sibille, Jennifer; Starodumov, Andrei; Caminada, Lea; Chen, Zhiling; Cittolin, Sergio; Dissertori, Günther; Dittmar, Michael; Eugster, Jürg; Freudenreich, Klaus; Grab, Christoph; Hervé, Alain; Hintz, Wieland; Lecomte, Pierre; Lustermann, Werner; Marchica, Carmelo; Meridiani, Paolo; Milenovic, Predrag; Moortgat, Filip; Nardulli, Alessandro; Nef, Pascal; Nessi-Tedaldi, Francesca; Pape, Luc; Pauss, Felicitas; Punz, Thomas; Rizzi, Andrea; Ronga, Frederic Jean; Sala, Leonardo; Sanchez, Ann - Karin; Sawley, Marie-Christine; Schinzel, Dietrich; Stieger, Benjamin; Tauscher, Ludwig; Thea, Alessandro; Theofilatos, Konstantinos; Treille, Daniel; Weber, Matthias; Wehrli, Lukas; Weng, Joanna; Aguiló, Ernest; Amsler, Claude; Chiochia, Vincenzo; De Visscher, Simon; Favaro, Carlotta; Ivova Rikova, Mirena; Jaeger, Andreas; Millan Mejias, Barbara; Regenfus, Christian; Robmann, Peter; Rommerskirchen, Tanja; Schmidt, Alexander; Tsirigkas, Dimitrios; Wilke, Lotte; Chang, Yuan-Hann; Chen, Kuan-Hsin; Chen, Wan-Ting; Go, Apollo; Kuo, Chia-Ming; Li, Syue-Wei; Lin, Willis; Liu, Ming-Hsiung; Lu, Yun-Ju; Wu, Jing-Han; Yu, Shin-Shan; Bartalini, Paolo; Chang, Paoti; Chang, You-Hao; Chang, Yu-Wei; Chao, Yuan; Chen, Kai-Feng; Hou, George Wei-Shu; Hsiung, Yee; Kao, Kai-Yi; Lei, Yeong-Jyi; Lin, Sheng-Wen; Lu, Rong-Shyang; Shiu, Jing-Ge; Tzeng, Yeng-Ming; Ueno, Koji; Wang, Chin-chi; Wang, Minzu; Wei, Jui-Te; Adiguzel, Aytul; Ayhan, Aydin; Bakirci, Mustafa Numan; Cerci, Salim; Demir, Zahide; Dozen, Candan; Dumanoglu, Isa; Eskut, Eda; Girgis, Semiray; Gökbulut, Gül; Güler, Yalcin; Gurpinar, Emine; Hos, Ilknur; Kangal, Evrim Ersin; Karaman, Turker; Kayis Topaksu, Aysel; Nart, Alisah; Önengüt, Gülsen; Ozdemir, Kadri; Ozturk, Sertac; Polatöz, Ayse; Sahin, Ozge; Sengul, Ozden; Sogut, Kenan; Tali, Bayram; Topakli, Huseyin; Uzun, Dilber; Vergili, Latife Nukhet; Vergili, Mehmet; Zorbilmez, Caglar; Akin, Ilina Vasileva; Aliev, Takhmasib; Bilmis, Selcuk; Deniz, Muhammed; Gamsizkan, Halil; Guler, Ali Murat; Ocalan, Kadir; Ozpineci, Altug; Serin, Meltem; Sever, Ramazan; Surat, Ugur Emrah; Yildirim, Eda; Zeyrek, Mehmet; Deliomeroglu, Mehmet; Demir, Durmus; Gülmez, Erhan; Halu, Arda; Isildak, Bora; Kaya, Mithat; Kaya, Ozlem; Özbek, Melih; Ozkorucuklu, Suat; Sonmez, Nasuf; Levchuk, Leonid; Bell, Peter; Bostock, Francis; Brooke, James John; Cheng, Teh Lee; Cussans, David; Frazier, Robert; Goldstein, Joel; Hansen, Maria; Heath, Greg P.; Heath, Helen F.; Hill, Christopher; Huckvale, Benedickt; Jackson, James; Kreczko, Lukasz; Mackay, Catherine Kirsty; Metson, Simon; Newbold, Dave M.; Nirunpong, Kachanon; Smith, Vincent J.; Ward, Simon; Basso, Lorenzo; Bell, Ken W.; Belyaev, Alexander; Brew, Christopher; Brown, Robert M.; Camanzi, Barbara; Cockerill, David J.A.; Coughlan, John A.; Harder, Kristian; Harper, Sam; Kennedy, Bruce W.; Olaiya, Emmanuel; Petyt, David; Radburn-Smith, Benjamin Charles; Shepherd-Themistocleous, Claire; Tomalin, Ian R.; Womersley, William John; Worm, Steven; Bainbridge, Robert; Ball, Gordon; Ballin, Jamie; Beuselinck, Raymond; Buchmuller, Oliver; Colling, David; Cripps, Nicholas; Cutajar, Michael; Davies, Gavin; Della Negra, Michel; Foudas, Costas; Fulcher, Jonathan; Futyan, David; Guneratne Bryer, Arlo; Hall, Geoffrey; Hatherell, Zoe; Hays, Jonathan; Iles, Gregory; Karapostoli, Georgia; Lyons, Louis; Magnan, Anne-Marie; Marrouche, Jad; Nandi, Robin; Nash, Jordan; Nikitenko, Alexander; Papageorgiou, Anastasios; Pesaresi, Mark; Petridis, Konstantinos; Pioppi, Michele; Raymond, David Mark; Rompotis, Nikolaos; Rose, Andrew; Ryan, Matthew John; Seez, Christopher; Sharp, Peter; Sparrow, Alex; Tapper, Alexander; Tourneur, Stephane; Vazquez Acosta, Monica; Virdee, Tejinder; Wakefield, Stuart; Wardrope, David; Whyntie, Tom; Barrett, Matthew; Chadwick, Matthew; Cole, Joanne; Hobson, Peter R.; Khan, Akram; Kyberd, Paul; Leslie, Dawn; Reid, Ivan; Teodorescu, Liliana; Bose, Tulika; Carrera Jarrin, Edgar; Clough, Andrew; Fantasia, Cory; Heister, Arno; St. John, Jason; Lawson, Philip; Lazic, Dragoslav; Rohlf, James; Sulak, Lawrence; Andrea, Jeremy; Avetisyan, Aram; Bhattacharya, Saptaparna; Chou, John Paul; Cutts, David; Esen, Selda; Ferapontov, Alexey; Heintz, Ulrich; Jabeen, Shabnam; Kukartsev, Gennadiy; Landsberg, Greg; Narain, Meenakshi; Nguyen, Duong; Speer, Thomas; Tsang, Ka Vang; Borgia, Maria Assunta; Breedon, Richard; Calderon De La Barca Sanchez, Manuel; Cebra, Daniel; Chertok, Maxwell; Conway, John; Cox, Peter Timothy; Dolen, James; Erbacher, Robin; Friis, Evan; Ko, Winston; Kopecky, Alexandra; Lander, Richard; Liu, Haidong; Maruyama, Sho; Miceli, Tia; Nikolic, Milan; Pellett, Dave; Robles, Jorge; Schwarz, Thomas; Searle, Matthew; Smith, John; Squires, Michael; Tripathi, Mani; Vasquez Sierra, Ricardo; Veelken, Christian; Andreev, Valeri; Arisaka, Katsushi; Cline, David; Cousins, Robert; Deisher, Amanda; Erhan, Samim; Farrell, Chris; Felcini, Marta; Hauser, Jay; Ignatenko, Mikhail; Jarvis, Chad; Plager, Charles; Rakness, Gregory; Schlein, Peter; Tucker, Jordan; Valuev, Vyacheslav; Wallny, Rainer; Babb, John; Clare, Robert; Ellison, John Anthony; Gary, J William; Giordano, Ferdinando; Hanson, Gail; Jeng, Geng-Yuan; Kao, Shih-Chuan; Liu, Feng; Liu, Hongliang; Luthra, Arun; Nguyen, Harold; Pasztor, Gabriella; Satpathy, Asish; Shen, Benjamin C.; Stringer, Robert; Sturdy, Jared; Sumowidagdo, Suharyo; Wilken, Rachel; Wimpenny, Stephen; Andrews, Warren; Branson, James G.; Dusinberre, Elizabeth; Evans, David; Golf, Frank; Holzner, André; Kelley, Ryan; Lebourgeois, Matthew; Letts, James; Mangano, Boris; Muelmenstaedt, Johannes; Padhi, Sanjay; Palmer, Christopher; Petrucciani, Giovanni; Pi, Haifeng; Pieri, Marco; Ranieri, Riccardo; Sani, Matteo; Sharma, Vivek; Simon, Sean; Tu, Yanjun; Vartak, Adish; Würthwein, Frank; Yagil, Avraham; Barge, Derek; Bellan, Riccardo; Blume, Michael; Campagnari, Claudio; D'Alfonso, Mariarosaria; Danielson, Thomas; Garberson, Jeffrey; Incandela, Joe; Justus, Christopher; Kalavase, Puneeth; Koay, Sue Ann; Kovalskyi, Dmytro; Krutelyov, Vyacheslav; Lamb, James; Lowette, Steven; Pavlunin, Viktor; Rebassoo, Finn; Ribnik, Jacob; Richman, Jeffrey; Rossin, Roberto; Stuart, David; To, Wing; Vlimant, Jean-Roch; Witherell, Michael; Bornheim, Adolf; Bunn, Julian; Gataullin, Marat; Kcira, Dorian; Litvine, Vladimir; Ma, Yousi; Newman, Harvey B.; Rogan, Christopher; Shin, Kyoungha; Timciuc, Vladlen; Traczyk, Piotr; Veverka, Jan; Wilkinson, Richard; Yang, Yong; Zhu, Ren-Yuan; Akgun, Bora; Carroll, Ryan; Ferguson, Thomas; Jang, Dong Wook; Jun, Soon Yung; Liu, Yueh-Feng; Paulini, Manfred; Russ, James; Terentyev, Nikolay; Vogel, Helmut; Vorobiev, Igor; Cumalat, John Perry; Dinardo, Mauro Emanuele; Drell, Brian Robert; Edelmaier, Christopher; Ford, William T.; Heyburn, Bernadette; Luiggi Lopez, Eduardo; Nauenberg, Uriel; Smith, James; Stenson, Kevin; Ulmer, Keith; Wagner, Stephen Robert; Zang, Shi-Lei; Agostino, Lorenzo; Alexander, James; Blekman, Freya; Chatterjee, Avishek; Das, Souvik; Eggert, Nicholas; Fields, Laura Johanna; Gibbons, Lawrence Kent; Heltsley, Brian; Henriksson, Kristofer; Hopkins, Walter; Khukhunaishvili, Aleko; Kreis, Benjamin; Kuznetsov, Valentin; Nicolas Kaufman, Gala; Patterson, Juliet Ritchie; Puigh, Darren; Riley, Daniel; Ryd, Anders; Saelim, Michael; Shi, Xin; Sun, Werner; Teo, Wee Don; Thom, Julia; Thompson, Joshua; Vaughan, Jennifer; Weng, Yao; Wittich, Peter; Biselli, Angela; Cirino, Guy; Winn, Dave; Abdullin, Salavat; Albrow, Michael; Anderson, Jacob; Apollinari, Giorgio; Atac, Muzaffer; Bakken, Jon Alan; Banerjee, Sunanda; Bauerdick, Lothar A.T.; Beretvas, Andrew; Berryhill, Jeffrey; Bhat, Pushpalatha C.; Bloch, Ingo; Borcherding, Frederick; Burkett, Kevin; Butler, Joel Nathan; Chetluru, Vasundhara; Cheung, Harry; Chlebana, Frank; Cihangir, Selcuk; Demarteau, Marcel; Eartly, David P.; Elvira, Victor Daniel; Fisk, Ian; Freeman, Jim; Gao, Yanyan; Gottschalk, Erik; Green, Dan; Gutsche, Oliver; Hahn, Alan; Hanlon, Jim; Harris, Robert M.; Hirschauer, James; James, Eric; Jensen, Hans; Johnson, Marvin; Joshi, Umesh; Khatiwada, Rakshya; Kilminster, Benjamin; Klima, Boaz; Kousouris, Konstantinos; Kunori, Shuichi; Kwan, Simon; Limon, Peter; Lipton, Ron; Lykken, Joseph; Maeshima, Kaori; Marraffino, John Michael; Mason, David; McBride, Patricia; McCauley, Thomas; Miao, Ting; Mishra, Kalanand; Mrenna, Stephen; Musienko, Yuri; Newman-Holmes, Catherine; O'Dell, Vivian; Popescu, Sorina; Pordes, Ruth; Prokofyev, Oleg; Saoulidou, Niki; Sexton-Kennedy, Elizabeth; Sharma, Seema; Smith, Richard P.; Soha, Aron; Spalding, William J.; Spiegel, Leonard; Tan, Ping; Taylor, Lucas; Tkaczyk, Slawek; Uplegger, Lorenzo; Vaandering, Eric Wayne; Vidal, Richard; Whitmore, Juliana; Wu, Weimin; Yumiceva, Francisco; Yun, Jae Chul; Acosta, Darin; Avery, Paul; Bourilkov, Dimitri; Chen, Mingshui; Di Giovanni, Gian Piero; Dobur, Didar; Drozdetskiy, Alexey; Field, Richard D.; Fisher, Matthew; Fu, Yu; Furic, Ivan-Kresimir; Gartner, Joseph; Kim, Bockjoo; Klimenko, Sergey; Konigsberg, Jacobo; Korytov, Andrey; Kotov, Khristian; Kropivnitskaya, Anna; Kypreos, Theodore; Matchev, Konstantin; Mitselmakher, Guenakh; Muniz, Lana; Pakhotin, Yuriy; Piedra Gomez, Jonatan; Prescott, Craig; Remington, Ronald; Schmitt, Michael; Scurlock, Bobby; Sellers, Paul; Wang, Dayong; Yelton, John; Zakaria, Mohammed; Ceron, Cristobal; Gaultney, Vanessa; Kramer, Laird; Lebolo, Luis Miguel; Linn, Stephan; Markowitz, Pete; Martinez, German; Mesa, Dalgis; Rodriguez, Jorge Luis; Adams, Todd; Askew, Andrew; Chen, Jie; Diamond, Brendan; Gleyzer, Sergei V; Haas, Jeff; Hagopian, Sharon; Hagopian, Vasken; Jenkins, Merrill; Johnson, Kurtis F.; Prosper, Harrison; Sekmen, Sezen; Veeraraghavan, Venkatesh; Baarmand, Marc M.; Guragain, Samir; Hohlmann, Marcus; Kalakhety, Himali; Mermerkaya, Hamit; Ralich, Robert; Vodopiyanov, Igor; Adams, Mark Raymond; Anghel, Ioana Maria; Apanasevich, Leonard; Bazterra, Victor Eduardo; Betts, Russell Richard; Callner, Jeremy; Cavanaugh, Richard; Dragoiu, Cosmin; Garcia-Solis, Edmundo Javier; Gerber, Cecilia Elena; Hofman, David Jonathan; Khalatyan, Samvel; Lacroix, Florent; Shabalina, Elizaveta; Smoron, Agata; Strom, Derek; Varelas, Nikos; Akgun, Ugur; Albayrak, Elif Asli; Bilki, Burak; Cankocak, Kerem; Clarida, Warren; Duru, Firdevs; Lae, Chung Khim; McCliment, Edward; Merlo, Jean-Pierre; Mestvirishvili, Alexi; Moeller, Anthony; Nachtman, Jane; Newsom, Charles Ray; Norbeck, Edwin; Olson, Jonathan; Onel, Yasar; Ozok, Ferhat; Sen, Sercan; Wetzel, James; Yetkin, Taylan; Yi, Kai; Barnett, Bruce Arnold; Blumenfeld, Barry; Bonato, Alessio; Eskew, Christopher; Fehling, David; Giurgiu, Gavril; Gritsan, Andrei; Guo, Zijin; Hu, Guofan; Maksimovic, Petar; Rappoccio, Salvatore; Swartz, Morris; Tran, Nhan Viet; Whitbeck, Andrew; Baringer, Philip; Bean, Alice; Benelli, Gabriele; Grachov, Oleg; Murray, Michael; Radicci, Valeria; Sanders, Stephen; Wood, Jeffrey Scott; Zhukova, Victoria; Bandurin, Dmitry; Bolton, Tim; Chakaberia, Irakli; Ivanov, Andrew; Kaadze, Ketino; Maravin, Yurii; Shrestha, Shruti; Svintradze, Irakli; Wan, Zongru; Gronberg, Jeffrey; Lange, David; Wright, Douglas; Baden, Drew; Boutemeur, Madjid; Eno, Sarah Catherine; Ferencek, Dinko; Hadley, Nicholas John; Kellogg, Richard G.; Kirn, Malina; Lu, Ying; Mignerey, Alice; Rossato, Kenneth; Rumerio, Paolo; Santanastasio, Francesco; Skuja, Andris; Temple, Jeffrey; Tonjes, Marguerite; Tonwar, Suresh C.; Twedt, Elizabeth; Alver, Burak; Bauer, Gerry; Bendavid, Joshua; Busza, Wit; Butz, Erik; Cali, Ivan Amos; Chan, Matthew; D'Enterria, David; Everaerts, Pieter; Gomez Ceballos, Guillelmo; Goncharov, Maxim; Hahn, Kristan Allan; Harris, Philip; Kim, Yongsun; Klute, Markus; Lee, Yen-Jie; Li, Wei; Loizides, Constantinos; Luckey, Paul David; Ma, Teng; Nahn, Steve; Paus, Christoph; Roland, Christof; Roland, Gunther; Rudolph, Matthew; Stephans, George; Sumorok, Konstanty; Sung, Kevin; Wenger, Edward Allen; Wyslouch, Bolek; Xie, Si; Yang, Mingming; Yilmaz, Yetkin; Yoon, Sungho; Zanetti, Marco; Cole, Perrie; Cooper, Seth; Cushman, Priscilla; Dahmes, Bryan; De Benedetti, Abraham; Dudero, Phillip Russell; Franzoni, Giovanni; Haupt, Jason; Klapoetke, Kevin; Kubota, Yuichi; Mans, Jeremy; Rekovic, Vladimir; Rusack, Roger; Sasseville, Michael; Singovsky, Alexander; Cremaldi, Lucien Marcus; Godang, Romulus; Kroeger, Rob; Perera, Lalith; Rahmat, Rahmat; Sanders, David A; Sonnek, Peter; Summers, Don; Bloom, Kenneth; Bose, Suvadeep; Butt, Jamila; Claes, Daniel R.; Dominguez, Aaron; Eads, Michael; Keller, Jason; Kelly, Tony; Kravchenko, Ilya; Lazo-Flores, Jose; Lundstedt, Carl; Malbouisson, Helena; Malik, Sudhir; Snow, Gregory R.; Baur, Ulrich; Iashvili, Ia; Kharchilava, Avto; Kumar, Ashish; Smith, Kenneth; Zennamo, Joseph; Alverson, George; Barberis, Emanuela; Baumgartel, Darin; Boeriu, Oana; Chasco, Matthew; Reucroft, Steve; Swain, John; Wood, Darien; Zhang, Jinzhong; Anastassov, Anton; Kubik, Andrew; Ofierzynski, Radoslaw Adrian; Pozdnyakov, Andrey; Schmitt, Michael; Stoynev, Stoyan; Velasco, Mayda; Won, Steven; Antonelli, Louis; Berry, Douglas; Hildreth, Michael; Jessop, Colin; Karmgard, Daniel John; Kolb, Jeff; Kolberg, Ted; Lannon, Kevin; Lynch, Sean; Marinelli, Nancy; Morse, David Michael; Ruchti, Randy; Slaunwhite, Jason; Valls, Nil; Warchol, Jadwiga; Wayne, Mitchell; Ziegler, Jill; Bylsma, Ben; Durkin, Lloyd Stanley; Gu, Jianhui; Killewald, Phillip; Ling, Ta-Yung; Rodenburg, Marissa; Williams, Grayson; Adam, Nadia; Berry, Edmund; Elmer, Peter; Gerbaudo, Davide; Halyo, Valerie; Hunt, Adam; Jones, John; Laird, Edward; Lopes Pegna, David; Marlow, Daniel; Medvedeva, Tatiana; Mooney, Michael; Olsen, James; Piroué, Pierre; Stickland, David; Tully, Christopher; Werner, Jeremy Scott; Zuranski, Andrzej; Acosta, Jhon Gabriel; Huang, Xing Tao; Lopez, Angel; Mendez, Hector; Oliveros, Sandra; Ramirez Vargas, Juan Eduardo; Zatserklyaniy, Andriy; Alagoz, Enver; Barnes, Virgil E.; Bolla, Gino; Borrello, Laura; Bortoletto, Daniela; Everett, Adam; Garfinkel, Arthur F.; Gecse, Zoltan; Gutay, Laszlo; Jones, Matthew; Koybasi, Ozhan; Laasanen, Alvin T.; Leonardo, Nuno; Liu, Chang; Maroussov, Vassili; Merkel, Petra; Miller, David Harry; Neumeister, Norbert; Potamianos, Karolos; Shipsey, Ian; Silvers, David; Yoo, Hwi Dong; Zablocki, Jakub; Zheng, Yu; Jindal, Pratima; Parashar, Neeti; Cuplov, Vesna; Ecklund, Karl Matthew; Geurts, Frank J.M.; Liu, Jinghua H.; Morales, Jafet; Padley, Brian Paul; Redjimi, Radia; Roberts, Jay; Betchart, Burton; Bodek, Arie; Chung, Yeon Sei; de Barbaro, Pawel; Demina, Regina; Eshaq, Yossof; Flacher, Henning; Garcia-Bellido, Aran; Goldenzweig, Pablo; Gotra, Yury; Han, Jiyeon; Harel, Amnon; Miner, Daniel Carl; Orbaker, Douglas; Petrillo, Gianluca; Vishnevskiy, Dmitry; Zielinski, Marek; Bhatti, Anwar; Demortier, Luc; Goulianos, Konstantin; Hatakeyama, Kenichi; Lungu, Gheorghe; Mesropian, Christina; Yan, Ming; Atramentov, Oleksiy; Gershtein, Yuri; Gray, Richard; Halkiadakis, Eva; Hidas, Dean; Hits, Dmitry; Lath, Amitabh; Rose, Keith; Schnetzer, Steve; Somalwar, Sunil; Stone, Robert; Thomas, Scott; Cerizza, Giordano; Hollingsworth, Matthew; Spanier, Stefan; Yang, Zong-Chang; York, Andrew; Asaadi, Jonathan; Eusebi, Ricardo; Gilmore, Jason; Gurrola, Alfredo; Kamon, Teruki; Khotilovich, Vadim; Montalvo, Roy; Nguyen, Chi Nhan; Pivarski, James; Safonov, Alexei; Sengupta, Sinjini; Toback, David; Weinberger, Michael; Akchurin, Nural; Bardak, Cemile; Damgov, Jordan; Jeong, Chiyoung; Kovitanggoon, Kittikul; Lee, Sung Won; Mane, Poonam; Roh, Youn; Sill, Alan; Volobouev, Igor; Wigmans, Richard; Yazgan, Efe; Appelt, Eric; Brownson, Eric; Engh, Daniel; Florez, Carlos; Gabella, William; Johns, Willard; Kurt, Pelin; Maguire, Charles; Melo, Andrew; Sheldon, Paul; Velkovska, Julia; Arenton, Michael Wayne; Balazs, Michael; Boutle, Sarah; Buehler, Marc; Conetti, Sergio; Cox, Bradley; Hirosky, Robert; Ledovskoy, Alexander; Neu, Christopher; Yohay, Rachel; Gollapinni, Sowjanya; Gunthoti, Kranti; Harr, Robert; Karchin, Paul Edmund; Mattson, Mark; Milstène, Caroline; Sakharov, Alexandre; Anderson, Michael; Bachtis, Michail; Bellinger, James Nugent; Carlsmith, Duncan; Dasu, Sridhara; Dutta, Suchandra; Efron, Jonathan; Gray, Lindsey; Grogg, Kira Suzanne; Grothe, Monika; Herndon, Matthew; Klabbers, Pamela; Klukas, Jeffrey; Lanaro, Armando; Lazaridis, Christos; Leonard, Jessica; Lomidze, David; Loveless, Richard; Mohapatra, Ajit; Polese, Giovanni; Reeder, Don; Savin, Alexander; Smith, Wesley H.; Swanson, Joshua; Weinberg, Marc

2010-01-01

The first LHC pp collisions at centre-of-mass energies of 0.9 and 2.36 TeV were recorded by the CMS detector in December 2009. The trajectories of charged particles produced in the collisions were reconstructed using the all-silicon Tracker and their momenta were measured in the 3.8 T axial magnetic field. Results from the Tracker commissioning are presented including studies of timing, efficiency, signal-to-noise, resolution, and ionization energy. Reconstructed tracks are used to benchmark the performance in terms of track and vertex resolutions, reconstruction of decays, estimation of ionization energy loss, as well as identification of photon conversions, nuclear interactions, and heavy-flavour decays.

Tracker: Image-Processing and Object-Tracking System Developed

Science.gov (United States)

Klimek, Robert B.; Wright, Theodore W.

1999-01-01

Tracker is an object-tracking and image-processing program designed and developed at the NASA Lewis Research Center to help with the analysis of images generated by microgravity combustion and fluid physics experiments. Experiments are often recorded on film or videotape for analysis later. Tracker automates the process of examining each frame of the recorded experiment, performing image-processing operations to bring out the desired detail, and recording the positions of the objects of interest. It can load sequences of images from disk files or acquire images (via a frame grabber) from film transports, videotape, laser disks, or a live camera. Tracker controls the image source to automatically advance to the next frame. It can employ a large array of image-processing operations to enhance the detail of the acquired images and can analyze an arbitrarily large number of objects simultaneously. Several different tracking algorithms are available, including conventional threshold and correlation-based techniques, and more esoteric procedures such as "snake" tracking and automated recognition of character data in the image. The Tracker software was written to be operated by researchers, thus every attempt was made to make the software as user friendly and self-explanatory as possible. Tracker is used by most of the microgravity combustion and fluid physics experiments performed by Lewis, and by visiting researchers. This includes experiments performed on the space shuttles, Mir, sounding rockets, zero-g research airplanes, drop towers, and ground-based laboratories. This software automates the analysis of the flame or liquid s physical parameters such as position, velocity, acceleration, size, shape, intensity characteristics, color, and centroid, as well as a number of other measurements. It can perform these operations on multiple objects simultaneously. Another key feature of Tracker is that it performs optical character recognition (OCR). This feature is useful in

Transcom's next move: Improvements to DOE's transportation satellite tracking systems

International Nuclear Information System (INIS)

Harmon, L.H.; Harris, A.D. III; Driscoll, K.L.; Ellis, L.G.

1990-01-01

In today's society, the use of satellites is becoming the state-of-the-art method of tracking shipments. The United States Department of Energy (US DOE) has advanced technology in this area with its transportation tracking and communications system, TRANSCOM, which has been in operation for over one year. TRANSCOM was developed by DOE to monitor selected, unclassified shipments of radioactive materials across the country. With the latest technology in satellite communications, Long Range Navigation (Loran), and computer networks, TRANSCOM tracks shipments in near-real time, disseminates information on each shipment to authorized users of the system, and offers two-way communications between vehicle operators and TRANSCOM users anywhere in the country. TRANSCOM's successful tracking record, during fiscal year 1989, includes shipments of spent fuel, cesium, uranium hexafluoride, and demonstration shipments for the Waste Isolation Pilot Plant (WIPP). Plans for fiscal year 1990 include tracking additional shipments, implementing system enhancements designed to meet the users' needs, and continuing to research the technology of tracking systems so that TRANSCOM can provide its users with the newest technology available in satellite communications. 3 refs., 1 fig

Thermal effects on the bulk luminous transmittance and track recording characteristics of dyed cellulose nitrate detectors

International Nuclear Information System (INIS)

Chakarvarti, S.K.; Lal, N.; Nagpaul, K.K.

1980-01-01

Simple heat treatment of polymers produces various typical morphological and chemical changes which consequently alter their physical and track registration properties. Bulk colour fading and alpha-track annealing effects have been studied in Kodak Pathe red-dyed cellulose nitrate film LR-115, type II and another Kodak product CA80-15, lightly rose-tinted cellulose nitrate, as a result of thermal annealing (room temperature to 155 0 C for times of 30 min to 16 h). The degree of colour fading has been measured in terms of percentage transmission of ordinary white light as sensed by a cadmium sulphide photoconductive cell, imitating the response of the human eye. It is found that at a given temperature, the transmittance rises first and acquires near-saturation after a certain annealing time. In the measurements reported here, it is seen that near-saturation transmittance is approximately proportional to the square root of the product of annealing time and temperature. The possibility of using these colour fading and transmittance measurements as an index of latent track fading is described. (orig.)

Provenance Representation in the Global Change Information System (GCIS)

Science.gov (United States)

Tilmes, Curt

2012-01-01

Global climate change is a topic that has become very controversial despite strong support within the scientific community. It is common for agencies releasing information about climate change to be served with Freedom of Information Act (FOIA) requests for everything that led to that conclusion. Capturing and presenting the provenance, linking to the research papers, data sets, models, analyses, observation instruments and satellites, etc. supporting key findings has the potential to mitigate skepticism in this domain. The U.S. Global Change Research Program (USGCRP) is now coordinating the production of a National Climate Assessment (NCA) that presents our best understanding of global change. We are now developing a Global Change Information System (GCIS) that will present the content of that report and its provenance, including the scientific support for the findings of the assessment. We are using an approach that will present this information both through a human accessible web site as well as a machine readable interface for automated mining of the provenance graph. We plan to use the developing W3C PROV Data Model and Ontology for this system.

Optimisation of the ATLAS Track Reconstruction Software for Run-2

CERN Document Server

Salzburger, Andreas; The ATLAS collaboration

2015-01-01

Track reconstruction is one of the most complex element of the reconstruction of events recorded by ATLAS from collisions delivered by the LHC. It is the most time consuming reconstruction component in high luminosity environments. The flat budget projections for computing resources for Run-2 of the LHC together with the demands of reconstructing higher pile-up collision data at rates more than double those in Run-1 (an increase from 400 Hz to 1 kHz in trigger output) have put stringent requirements on the track reconstruction software. The ATLAS experiment has performed a two year long software campaign which aimed to reduce the reconstruction rate by a factor of three to meet the resource limitations for Run-2: the majority of the changes to achieve this were improvements to the track reconstruction software. The CPU processing time of ATLAS track reconstruction was reduced by more than a factor of three during this campaign without any loss of output information of the track reconstruction. We present the ...

Effect of cross-correlation on track-to-track fusion

Science.gov (United States)

Saha, Rajat K.

1994-07-01

Since the advent of target tracking systems employing a diverse mixture of sensors, there has been increasing recognition by air defense system planners and other military system analysts of the need to integrate these tracks so that a clear air picture can be obtained in a command center. A popular methodology to achieve this goal is to perform track-to-track fusion, which performs track-to-track association as well as kinematic state vector fusion. This paper seeks to answer analytically the extent of improvement achievable by means of kinetic state vector fusion when the tracks are obtained from dissimilar sensors (e.g., Radar/ESM/IRST/IFF). It is well known that evaluation of the performance of state vector fusion algorithms at steady state must take into account the effects of cross-correlation between eligible tracks introduced by the input noise which, unfortunately, is often neglected because of added computational complexity. In this paper, an expression for the steady-state cross-covariance matrix for a 2D state vector track-to-track fusion is obtained. This matrix is shown to be a function of the parameters of the Kalman filters associated with the candidate tracks being fused. Conditions for positive definiteness of the cross-covariance matrix have been derived and the effect of positive definiteness on performance of track-to-track fusion is also discussed.

NucliTrack: an integrated nuclei tracking application.

Science.gov (United States)

Cooper, Sam; Barr, Alexis R; Glen, Robert; Bakal, Chris

2017-10-15

Live imaging studies give unparalleled insight into dynamic single cell behaviours and fate decisions. However, the challenge of reliably tracking single cells over long periods of time limits both the throughput and ease with which such studies can be performed. Here, we present NucliTrack, a cross platform solution for automatically segmenting, tracking and extracting features from fluorescently labelled nuclei. NucliTrack performs similarly to other state-of-the-art cell tracking algorithms, but NucliTrack's interactive, graphical interface makes it significantly more user friendly. NucliTrack is available as a free, cross platform application and open source Python package. Installation details and documentation are at: http://nuclitrack.readthedocs.io/en/latest/ A video guide can be viewed online: https://www.youtube.com/watch?v=J6e0D9F-qSU Source code is available through Github: https://github.com/samocooper/nuclitrack. A Matlab toolbox is also available at: https://uk.mathworks.com/matlabcentral/fileexchange/61479-samocooper-nuclitrack-matlab. sam@socooper.com. Supplementary data are available at Bioinformatics online. © The Author(s) 2017. Published by Oxford University Press.

Slab Track at Facility for Accelerated Service Testing: Performance and Serviceability

Science.gov (United States)

2018-02-01

The Transportation Technology Center, Inc., with funding by the Portland Cement Association and the Federal Railroad Administration, documented the available records associated with the performance of the concrete slab track section in the High Tonna...

CSA C873 Building Energy Estimation Methodology - A simplified monthly calculation for quick building optimization

NARCIS (Netherlands)

Legault, A.; Scott, L.; Rosemann, A.L.P.; Hopkins, M.

2014-01-01

CSA C873 Building Energy Estimation Methodology (BEEM) is a new series of (10) standards that is intended to simplify building energy calculations. The standard is based upon the German DIN Standard 18599 that has 8 years of proven track record and has been modified for the Canadian market. The BEEM

40 CFR 96.253 - Recordation of CAIR SO2 allowances.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Recordation of CAIR SO2 allowances. 96... (CONTINUED) NOX BUDGET TRADING PROGRAM AND CAIR NOX AND SO2 TRADING PROGRAMS FOR STATE IMPLEMENTATION PLANS CAIR SO2 Allowance Tracking System § 96.253 Recordation of CAIR SO2 allowances. (a)(1) After a...

40 CFR 97.253 - Recordation of CAIR SO2 allowances.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Recordation of CAIR SO2 allowances. 97... (CONTINUED) FEDERAL NOX BUDGET TRADING PROGRAM AND CAIR NOX AND SO2 TRADING PROGRAMS CAIR SO2 Allowance Tracking System § 97.253 Recordation of CAIR SO2 allowances. (a)(1) After a compliance account is...

78 FR 35610 - Privacy Act of 1974; System of Records

Science.gov (United States)

2013-06-13

... Defense. NM05720-1 System name: FOIA Request/Appeal Files and Tracking System (April 2, 2008, 73 FR 17961...: Delete entry and replace with ``Records are accessed by custodian of the record system and by persons... cabinets or rooms, which are not viewable by individuals who do not have a need to know. Computerized...

What’s New in Traumatic Brain Injury: Update on Tracking, Monitoring and Treatment

Directory of Open Access Journals (Sweden)

Cesar Reis

2015-05-01

Full Text Available Traumatic brain injury (TBI, defined as an alteration in brain functions caused by an external force, is responsible for high morbidity and mortality around the world. It is important to identify and treat TBI victims as early as possible. Tracking and monitoring TBI with neuroimaging technologies, including functional magnetic resonance imaging (fMRI, diffusion tensor imaging (DTI, positron emission tomography (PET, and high definition fiber tracking (HDFT show increasing sensitivity and specificity. Classical electrophysiological monitoring, together with newly established brain-on-chip, cerebral microdialysis techniques, both benefit TBI. First generation molecular biomarkers, based on genomic and proteomic changes following TBI, have proven effective and economical. It is conceivable that TBI-specific biomarkers will be developed with the combination of systems biology and bioinformation strategies. Advances in treatment of TBI include stem cell-based and nanotechnology-based therapy, physical and pharmaceutical interventions and also new use in TBI for approved drugs which all present favorable promise in preventing and reversing TBI.

What’s New in Traumatic Brain Injury: Update on Tracking, Monitoring and Treatment

Science.gov (United States)

Reis, Cesar; Wang, Yuechun; Akyol, Onat; Ho, Wing Mann; Applegate II, Richard; Stier, Gary; Martin, Robert; Zhang, John H.

2015-01-01

Traumatic brain injury (TBI), defined as an alteration in brain functions caused by an external force, is responsible for high morbidity and mortality around the world. It is important to identify and treat TBI victims as early as possible. Tracking and monitoring TBI with neuroimaging technologies, including functional magnetic resonance imaging (fMRI), diffusion tensor imaging (DTI), positron emission tomography (PET), and high definition fiber tracking (HDFT) show increasing sensitivity and specificity. Classical electrophysiological monitoring, together with newly established brain-on-chip, cerebral microdialysis techniques, both benefit TBI. First generation molecular biomarkers, based on genomic and proteomic changes following TBI, have proven effective and economical. It is conceivable that TBI-specific biomarkers will be developed with the combination of systems biology and bioinformation strategies. Advances in treatment of TBI include stem cell-based and nanotechnology-based therapy, physical and pharmaceutical interventions and also new use in TBI for approved drugs which all present favorable promise in preventing and reversing TBI. PMID:26016501

Quality of Slab Track Construction – Track Alignment Design and Track Geometry

Directory of Open Access Journals (Sweden)

Šestáková Janka

2015-05-01

Full Text Available The slab track superstructure design (without ballast is a perspective construction especially for building tunnels and bridges in the modernized sections of railway tracks in Slovakia. Monitoring of the structure described in this article is focused on the transition areas between standard structure with ballast and slab track construction.

Assisting doctors on assessing movements in infants using motion tracking

DEFF Research Database (Denmark)

Olsen, Mikkel; Herskind, Anna; Nielsen, Jens Bo

2015-01-01

In this work, we consider the possibilities of having an automatic computer-based system for tracking the movements of infants. An existing motion tracking system is used to process recorded video sequences containing both color and spatial information of the infant's body pose and movements....... The system uses these sequences of data to estimate the underlying skeleton of the infant and parametrize the movements. Post-processing of these parameters can yield objective measurements of an infant's movement patterns. This could e.g. be quantification of (a)symmetry and recognition of certain gestures/actions...

78 FR 48642 - Privacy Act Systems of Records; Phytosanitary Certificate Issuance and Tracking System

Science.gov (United States)

2013-08-09

..., view user fees accrued and paid, and track the status of phytosanitary certification. Foreign... pursuant thereto; (5) To the Department of Justice when: (a) The agency, or any component thereof; or (b... or her individual capacity where the Department of Justice has agreed to represent the employee; or...

Note: Time-gated 3D single quantum dot tracking with simultaneous spinning disk imaging

International Nuclear Information System (INIS)

DeVore, M. S.; Stich, D. G.; Keller, A. M.; Phipps, M. E.; Hollingsworth, J. A.; Goodwin, P. M.; Werner, J. H.; Cleyrat, C.; Lidke, D. S.; Wilson, B. S.

2015-01-01

We describe recent upgrades to a 3D tracking microscope to include simultaneous Nipkow spinning disk imaging and time-gated single-particle tracking (SPT). Simultaneous 3D molecular tracking and spinning disk imaging enable the visualization of cellular structures and proteins around a given fluorescently labeled target molecule. The addition of photon time-gating to the SPT hardware improves signal to noise by discriminating against Raman scattering and short-lived fluorescence. In contrast to camera-based SPT, single-photon arrival times are recorded, enabling time-resolved spectroscopy (e.g., measurement of fluorescence lifetimes and photon correlations) to be performed during single molecule/particle tracking experiments

Note: Time-gated 3D single quantum dot tracking with simultaneous spinning disk imaging

Energy Technology Data Exchange (ETDEWEB)

DeVore, M. S.; Stich, D. G.; Keller, A. M.; Phipps, M. E.; Hollingsworth, J. A.; Goodwin, P. M.; Werner, J. H., E-mail: jwerner@lanl.gov [Center for Integrated Nanotechnologies, Los Alamos National Laboratory, Mail Stop G755, Los Alamos, New Mexico 87545 (United States); Cleyrat, C.; Lidke, D. S.; Wilson, B. S. [Department of Pathology and Cancer Research and Treatment Center, University of New Mexico, Albuquerque, New Mexico 87131 (United States)

2015-12-15

We describe recent upgrades to a 3D tracking microscope to include simultaneous Nipkow spinning disk imaging and time-gated single-particle tracking (SPT). Simultaneous 3D molecular tracking and spinning disk imaging enable the visualization of cellular structures and proteins around a given fluorescently labeled target molecule. The addition of photon time-gating to the SPT hardware improves signal to noise by discriminating against Raman scattering and short-lived fluorescence. In contrast to camera-based SPT, single-photon arrival times are recorded, enabling time-resolved spectroscopy (e.g., measurement of fluorescence lifetimes and photon correlations) to be performed during single molecule/particle tracking experiments.

PEAK TRACKING WITH A NEURAL NETWORK FOR SPECTRAL RECOGNITION

NARCIS (Netherlands)

COENEGRACHT, PMJ; METTING, HJ; VANLOO, EM; SNOEIJER, GJ; DOORNBOS, DA

1993-01-01

A peak tracking method based on a simulated feed-forward neural network with back-propagation is presented. The network uses the normalized UV spectra and peak areas measured in one chromatogram for peak recognition. It suffices to train the network with only one set of spectra recorded in one

Soft-information flipping approach in multi-head multi-track BPMR systems

Science.gov (United States)

Warisarn, C.; Busyatras, W.; Myint, L. M. M.

2018-05-01

Inter-track interference is one of the most severe impairments in bit-patterned media recording system. This impairment can be effectively handled by a modulation code and a multi-head array jointly processing multiple tracks; however, such a modulation constraint has never been utilized to improve the soft-information. Therefore, this paper proposes the utilization of modulation codes with an encoded constraint defined by the criteria for soft-information flipping during a three-track data detection process. Moreover, we also investigate the optimal offset position of readheads to provide the most improvement in system performance. The simulation results indicate that the proposed systems with and without position jitter are significantly superior to uncoded systems.

Data Provenance Inference in Logic Programming: Reducing Effort of Instance-driven Debugging

NARCIS (Netherlands)

Huq, M.R.; Mileo, Alessandra; Wombacher, Andreas

Data provenance allows scientists in different domains validating their models and algorithms to find out anomalies and unexpected behaviors. In previous works, we described on-the-fly interpretation of (Python) scripts to build workflow provenance graph automatically and then infer fine-grained

Fission - track age of the Marjalahti Pallasite

International Nuclear Information System (INIS)

Bondar, Yu.V.; Perelygin, V.P.

2006-01-01

Full text: Investigation of fossil charged-particle tracks in various mineral phases of extraterrestrial samples is a powerful method for research the early stages of the solar system. Over geological time, meteorites crystals have accumulated a record of tracks produced by heavily charged energetic particles from both internal (spontaneous fission of 238U and some other extinct isotopes) and external sources (galactic cosmic rays with Z>20). The fortunate fact that meteorite grains can accumulate latent and very long-lived tracks since soon after the end of nucleosynthesis in the solar nebula enables one to decode their radiation history and to detect any thermal events in the meteorite cosmic history by revealing these tracks through suitable etching procedures. Only a few minerals in meteorites (mainly phosphates) contain small amount of uranium; the fact that 238 U undergoes fission with fission-decay constant λ f ∼ 8.2x10 -17 yr -1 allows one to use this isotope as a chronometer. By measuring the U concentration in the crystals (by reactor irradiation) and the density of the spontaneous-fission tracks it is relatively easy to calculate the 'fission-track age' if 238 U is the main source of fission tracks. However the fission-track dating of extraterrestrial samples compared with the terrestrial ones has some peculiar features due to presence of a number of other potential track sources except the spontaneous fission of 238 U, such as the spontaneous fission of presently extinct 244 Pu, heavy nuclei of cosmic rays and induced fission by cosmic ray primaries. Only tracks from the spontaneous fission of U and Pu are suitable for fission-track dating. The competing effects of these fissioning elements, whose half-lives differ by a factor of ∼50, form a basis for a fission-track chronology for samples older than ∼ 4.0 Gyr. Over small intervals in time (∼ few x10 8 yr ) the track density from spontaneous fission of 238 U is nearly constant. However, the

Instrument for track linear element recognition

International Nuclear Information System (INIS)

Krupnov, V.E.; Fedotov, O.P.

1977-01-01

Described is the construction of instrument for recognizing linear elements of tracks. For designing this instrument use has been made of the algorithm for conversion of the point data into a set of linear elements. The flowsheet of the instrument shows its major units such as data converter, data representation register unit, local computers, interface with the central computer. The data representation register unit comprises sixteen registers and is capable of presenting data from sixteen lines when raster scanning of a picture taken from a track chamber. The maximum capacity of the code of the coordinate of a point recorded on a picture is up to 16 digits. The time of the inner operating cycle of the instrument is 1.3 μs. The average time required for processing data containing sixteen scanning lines is 250 μs

Automated cell tracking and analysis in phase-contrast videos (iTrack4U): development of Java software based on combined mean-shift processes.

Science.gov (United States)

Cordelières, Fabrice P; Petit, Valérie; Kumasaka, Mayuko; Debeir, Olivier; Letort, Véronique; Gallagher, Stuart J; Larue, Lionel

2013-01-01

Cell migration is a key biological process with a role in both physiological and pathological conditions. Locomotion of cells during embryonic development is essential for their correct positioning in the organism; immune cells have to migrate and circulate in response to injury. Failure of cells to migrate or an inappropriate acquisition of migratory capacities can result in severe defects such as altered pigmentation, skull and limb abnormalities during development, and defective wound repair, immunosuppression or tumor dissemination. The ability to accurately analyze and quantify cell migration is important for our understanding of development, homeostasis and disease. In vitro cell tracking experiments, using primary or established cell cultures, are often used to study migration as cells can quickly and easily be genetically or chemically manipulated. Images of the cells are acquired at regular time intervals over several hours using microscopes equipped with CCD camera. The locations (x,y,t) of each cell on the recorded sequence of frames then need to be tracked. Manual computer-assisted tracking is the traditional method for analyzing the migratory behavior of cells. However, this processing is extremely tedious and time-consuming. Most existing tracking algorithms require experience in programming languages that are unfamiliar to most biologists. We therefore developed an automated cell tracking program, written in Java, which uses a mean-shift algorithm and ImageJ as a library. iTrack4U is a user-friendly software. Compared to manual tracking, it saves considerable amount of time to generate and analyze the variables characterizing cell migration, since they are automatically computed with iTrack4U. Another major interest of iTrack4U is the standardization and the lack of inter-experimenter differences. Finally, iTrack4U is adapted for phase contrast and fluorescent cells.

Automated cell tracking and analysis in phase-contrast videos (iTrack4U: development of Java software based on combined mean-shift processes.

Directory of Open Access Journals (Sweden)

Fabrice P Cordelières

Full Text Available Cell migration is a key biological process with a role in both physiological and pathological conditions. Locomotion of cells during embryonic development is essential for their correct positioning in the organism; immune cells have to migrate and circulate in response to injury. Failure of cells to migrate or an inappropriate acquisition of migratory capacities can result in severe defects such as altered pigmentation, skull and limb abnormalities during development, and defective wound repair, immunosuppression or tumor dissemination. The ability to accurately analyze and quantify cell migration is important for our understanding of development, homeostasis and disease. In vitro cell tracking experiments, using primary or established cell cultures, are often used to study migration as cells can quickly and easily be genetically or chemically manipulated. Images of the cells are acquired at regular time intervals over several hours using microscopes equipped with CCD camera. The locations (x,y,t of each cell on the recorded sequence of frames then need to be tracked. Manual computer-assisted tracking is the traditional method for analyzing the migratory behavior of cells. However, this processing is extremely tedious and time-consuming. Most existing tracking algorithms require experience in programming languages that are unfamiliar to most biologists. We therefore developed an automated cell tracking program, written in Java, which uses a mean-shift algorithm and ImageJ as a library. iTrack4U is a user-friendly software. Compared to manual tracking, it saves considerable amount of time to generate and analyze the variables characterizing cell migration, since they are automatically computed with iTrack4U. Another major interest of iTrack4U is the standardization and the lack of inter-experimenter differences. Finally, iTrack4U is adapted for phase contrast and fluorescent cells.

μtrack profiles for investigating side effects of advanced silicon heads for helical scan tape systems

NARCIS (Netherlands)

Hozoi, A.; Groenland, J.P.J.; Lodder, J.C.; Albertini, J.B.

2002-01-01

Track and μtrack scans are common techniques in hard disk systems for investigating side writing and side reading, and for characterizing the response of MR read heads. These methods are implemented less in tape systems, where the contact recording mode and flexible medium make it difficult to

Provenance data in social media

CERN Document Server

Barbier, Geoffrey; Gundecha, Pritam

2013-01-01

Social media shatters the barrier to communicate anytime anywhere for people of all walks of life. The publicly available, virtually free information in social media poses a new challenge to consumers who have to discern whether a piece of information published in social media is reliable. For example, it can be difficult to understand the motivations behind a statement passed from one user to another, without knowing the person who originated the message. Additionally, false information can be propagated through social media, resulting in embarrassment or irreversible damages. Provenance data

77 FR 63891 - Records Schedules; Availability and Request for Comments

Science.gov (United States)

2012-10-17

..., this public notice lists the organizational unit(s) accumulating the records or indicates agency- wide... electronic information system used to track employee language skills. 6. Department of Justice, Federal...

Alignment of the ATLAS Inner Detector Tracking System

CERN Document Server

Heller, C; The ATLAS collaboration

2011-01-01

ATLAS is one of the multipurpose experiments that records the products of the LHC proton-proton and heavy ion collisions. In order to reconstruct trajectories of charged particles produced in these collisions, ATLAS is equipped with a tracking system built using two different technologies, silicon planar sensors (pixel and microstrips) and drift-tube based detectors. Together they constitute the ATLAS Inner Detector, which is embedded in a 2 T axial field. Efficiently reconstructing tracks from charged particles traversing the detector, and precisely measure their momenta is of crucial importance for physics analyses. In order to achieve its scientific goals, an alignment of the ATLAS Inner Detector is required to accurately determine its more than 700,000 degrees of freedom. The goal of the alignment is set such that the limited knowledge of the sensor locations should not deteriorate the resolution of track parameters by more than 20% with respect to the intrinsic tracker resolution. The implementation of t...

Improvements to ATLAS track reconstruction for Run II

Energy Technology Data Exchange (ETDEWEB)

Cairo, Valentina Maria Martina, E-mail: valentina.maria.cairo@cern.ch [University of Calabria, Arcavacata di Rende (Italy); CERN, Meyrin (Switzerland)

2016-07-11

Run II of the LHC will provide new challenges to track and vertex reconstruction with higher energies, denser jets and higher rates. A major change to the Inner Detector layout during the shutdown period has been the installation of the Insertable B-Layer, a fourth pixel layer located at a radius of 33 mm. This contribution discusses improvements to track reconstruction developed during the two year shutdown of the LHC. These include novel techniques developed to improve the performance in the dense cores of jets, optimisation for the expected conditions, and a big software campaign which lead to more than a factor of three decrease in the CPU time needed to process each recorded event.

Persistent identifiers for web service requests relying on a provenance ontology design pattern

Science.gov (United States)

Car, Nicholas; Wang, Jingbo; Wyborn, Lesley; Si, Wei

2016-04-01

Delivering provenance information for datasets produced from static inputs is relatively straightforward: we represent the processing actions and data flow using provenance ontologies and link to stored copies of the inputs stored in repositories. If appropriate detail is given, the provenance information can then describe what actions have occurred (transparency) and enable reproducibility. When web service-generated data is used by a process to create a dataset instead of a static inputs, we need to use sophisticated provenance representations of the web service request as we can no longer just link to data stored in a repository. A graph-based provenance representation, such as the W3C's PROV standard, can be used to model the web service request as a single conceptual dataset and also as a small workflow with a number of components within the same provenance report. This dual representation does more than just allow simplified or detailed views of a dataset's production to be used where appropriate. It also allow persistent identifiers to be assigned to instances of a web service requests, thus enabling one form of dynamic data citation, and for those identifiers to resolve to whatever level of detail implementers think appropriate in order for that web service request to be reproduced. In this presentation we detail our reasoning in representing web service requests as small workflows. In outline, this stems from the idea that web service requests are perdurant things and in order to most easily persist knowledge of them for provenance, we should represent them as a nexus of relationships between endurant things, such as datasets and knowledge of particular system types, as these endurant things are far easier to persist. We also describe the ontology design pattern that we use to represent workflows in general and how we apply it to different types of web service requests. We give examples of specific web service requests instances that were made by systems

Obsidian provenance research in the Americas.

Science.gov (United States)

Glascock, Michael D

2002-08-01

The characterization of archaeological materials to support provenance research has grown rapidly over the past few decades. Volcanic obsidian has several unique properties that make it the ideal archaeological material for studying prehistoric trade and exchange. This Account describes our laboratory's development of a systematic methodology for the characterization of obsidian sources and artifacts from Mesoamerica and other regions of North and South America in support of archaeological research.

Intelligent Materials Tracking System for Construction Projects Management

Directory of Open Access Journals (Sweden)

Narimah Kasim

2015-05-01

Full Text Available An essential factor adversely affecting the performance of construction projects is the improper handling of materials during site activities. In addition, paper-based reports are mostly used to record and exchange information related to the material components within the supply chain, which is problematic and inefficient. Generally, technologies (such as wireless systems and RFID are not being adequately used to overcome human errors and are not well integrated with project management systems to make tracking and management of materials easier and faster. Findings from a literature review and surveys showed that there is a lack of positive examples of such tools having been used effectively. Therefore, this research focused on the development of a materials tracking system that integrates RFID-based materials management with resources modelling to improve on-site materials tracking. Rapid prototyping was used to develop the system and testing of the system was carried out to examine the functionality and working appropriately. The proposed system is intended to promote the employment of RFID for automatic materials tracking with integration of resource modelling (Microsoft (R Office Project in the project management system in order to establish which of the tagged components are required resources for certain project tasks. In conclusion, the system provides an automatic and easy tracking method for managing materials during materials delivery and inventory management processes in construction projects.

Postoperative morbidity after fast-track laparoscopic resection of rectal cancer

DEFF Research Database (Denmark)

Stottmeier, S; Harling, H; Wille-Jørgensen, Peer Anders

2012-01-01

Aim: Analysis was carried out of the nature and chronological order of early complications after fast-track laparoscopic rectal surgery with a view to optimize the short-time outcome of rectal cancer surgery. Method: 102 consecutive patients who underwent elective fast-track laparoscopic rectal......: Postoperative morbidity remains a significant problem even in the fast-track era, even in experienced surgical hands. Our results suggest that besides improvement of surgical technique further improvement of outcome lies in early recognition and proper treatment of complications and the perioperative...... cancer surgery were analysed prospectively from the Danish Colorectal Cancer Database supplemented by data from the medical records. We studied in detail the nature and chronological order of postoperative morbidity and reason for prolonged stay (>5 days). Results: Twenty-five patients (25 per cent) had...

Tracking change over time: River flooding

Science.gov (United States)

,

2014-01-01

Landsat satellites have been capturing images of Earth from space since 1972. These images provide a long-term record of natural and human-induced changes on the global landscape. Comparing images from multiple years reveals slow and subtle changes as well as rapid and devastating ones. Landsat images are available from the Internet at no charge. Using the free software MultiSpec, students can track changes to the landscape over time—just like remote sensing scientists do!

Identification of provenance rocks based on EPMA analyses of heavy minerals

Science.gov (United States)

Shimizu, M.; Sano, N.; Ueki, T.; Yonaga, Y.; Yasue, K. I.; Masakazu, N.

2017-12-01

Information on mountain building is significant in the field of geological disposal of high-level radioactive waste, because this affects long-term stability in groundwater flow system. Provenance analysis is one of effective approaches for understanding building process of mountains. Chemical compositions of heavy minerals, as well as their chronological data, can be an index for identification of provenance rocks. The accurate identification requires the measurement of as many grains as possible. In order to achieve an efficient provenance analysis, we developed a method for quick identification of heavy minerals using an Electron Probe Micro Analyzer (EPMA). In this method, heavy mineral grains extracted from a sample were aligned on a glass slide and mounted in a resin. Concentration of 28 elements was measured for 300-500 grains per sample using EPMA. To measure as many grains as possible, we prioritized swiftness of measurement over precision, configuring measurement time of about 3.5 minutes for each grain. Identification of heavy minerals was based on their chemical composition. We developed a Microsoft® Excel® spread sheet input criteria of mineral identification using a typical range of chemical compositions for each mineral. The grains of 110 wt.% total were rejected. The criteria of mineral identification were revised through the comparison between mineral identification by optical microscopy and chemical compositions of grains classified as "unknown minerals". Provenance rocks can be identified based on abundance ratio of identified minerals. If no significant difference of the abundance ratio was found among source rocks, chemical composition of specific minerals was used as another index. This method was applied to the sediments of some regions in Japan where provenance rocks had lithological variations but similar formation ages. Consequently, the provenance rocks were identified based on chemical compositions of heavy minerals resistant to

Perpendicular recording: the promise and the problems

International Nuclear Information System (INIS)

Wood, Roger; Sonobe, Yoshiaki; Jin Zhen; Wilson, Bruce

2001-01-01

Perpendicular recording has long been advocated as a means of achieving the highest areal densities. In particular, in the context of the 'superparamagnetic limit', perpendicular recording with a soft underlayer promises several key advantages. These advantages include a higher coercivity, thicker media that should permit smaller diameter grains and higher signal-to-noise ratio. Also, the sharper edge-writing will facilitate recording at very high track densities (lower bit aspect ratio). Recent demonstrations of the technology have shown densities comparable with the highest densities reported for longitudinal recording. This paper further examines the promise that perpendicular recording will deliver an increase in areal density two to eight times higher than that achievable with longitudinal recording. There are a number of outstanding issues but the key challenge is to create a low-noise medium with a coercivity that is high and is much larger than the remanent magnetization

Tracking errors in a prototype real-time tumour tracking system

International Nuclear Information System (INIS)

Sharp, Gregory C; Jiang, Steve B; Shimizu, Shinichi; Shirato, Hiroki

2004-01-01

In motion-compensated radiation therapy, radio-opaque markers can be implanted in or near a tumour and tracked in real-time using fluoroscopic imaging. Tracking these implanted markers gives highly accurate position information, except when tracking fails due to poor or ambiguous imaging conditions. This study investigates methods for automatic detection of tracking errors, and assesses the frequency and impact of tracking errors on treatments using the prototype real-time tumour tracking system. We investigated four indicators for automatic detection of tracking errors, and found that the distance between corresponding rays was most effective. We also found that tracking errors cause a loss of gating efficiency of between 7.6 and 10.2%. The incidence of treatment beam delivery during tracking errors was estimated at between 0.8% and 1.25%

76 FR 13647 - Proposed Collection; Comment Request-Interactive Diet and Activity Tracking in AARP (iDATA...

Science.gov (United States)

2011-03-14

... Request--Interactive Diet and Activity Tracking in AARP (iDATA): Biomarker Based Validation Study Summary... Collection: Title: Interactive Diet and Activity Tracking in AARP (iDATA): Biomarker Based Validation Study... Food Record 742 2 60/60 (1.0) 1,485 (Attachment 17). Diet History 742 2 45/60 (.75) 1,114 Questionnaire...

Fast emulation of track reconstruction in the CMS simulation

CERN Document Server

Komm, Matthias

2017-01-01

Simulated samples of various physics processes are a key ingredient within analyses to unlock the physics behind LHC collision data. Samples with more and more statistics are required to keep up with the increasing amounts of recorded data. During sample generation, significant computing time is spent on the reconstruction of charged particle tracks from energy deposits which additionally scales with the pileup conditions. In CMS, the FastSimulation package is developed for providing a fast alternative to the standard simulation and reconstruction workflow. It employs various techniques to emulate track reconstruction effects in particle collision events. Several analysis groups in CMS are utilizing the package, in particular those requiring many samples to scan the parameter space of physics models (e.g. SUSY) or for the purpose of estimating systematic uncertainties. The strategies for and recent developments in this emulation are presented, including a novel, flexible implementation of tracking emulation w...

78 FR 10214 - Records Schedules; Availability and Request for Comments

Science.gov (United States)

2013-02-13

... used to track Army aviation products throughout their life cycle. 5. Department of the Army, Agency...-2013- 0001, 6 items, 3 temporary items). Records relating to the administration of housing surveys in...

Physiological response to drought stress in Camptotheca acuminata seedlings from two provenances

Directory of Open Access Journals (Sweden)

Yeqing eYing

2015-05-01

Full Text Available Drought stress is a key environmental factor limiting the growth and productivity of plants. The purpose of this study was to investigate the physiological responses of Camptotheca acuminata (C. acuminata to different drought stresses and compare the drought tolerance between the provenances Kunming (KM and Nanchang (NC, which are naturally distributed in different rainfall zones with annual rainfalls of 1000-1100 mm and 1600-1700 mm, respectively. We determined relative water content (RWC, chlorophyll content (Chl(a+b, net photosynthesis (Pn, gas exchange parameters, relative leakage conductivity (REC, malondialdehyde (MDA content and superoxide dismutase (SOD and peroxidase (POD activities of C. acuminata seedlings under both moderate (50% of maximum field capacity and severe drought stress (30% of maximum field capacity. As the degree of water stress increased, RWC, Chl(a+b content, Pn, stomatal conductance (Gs, transpiration rate (Tr and intercellular CO2 concentration (Ci values decreased, but water use efficiency (WUE, REC, MDA content and SOD and POD activities increased in provenances KM and NC. Under moderate and severe drought stress, provenance KM had higher RWC, Chl(a+b, Pn, WUE, SOD and POD and lower Gs, Tr, Ci and REC in leaves than provenance NC. The results indicated that provenance KM may maintain stronger drought tolerance via improvements in water-retention capacity, antioxidant enzyme activity and membrane integrity.

78 FR 63319 - Privacy Act of 1974, as Amended; System of Records

Science.gov (United States)

2013-10-23

... Correspondence Records. FDIC 30-64-0030 Legislative Information Tracking System Records. FDIC 30-64-0031 Online..., identity theft or fraud, or harm to the security or integrity of this system or other systems or programs... authorities in connection with hiring or retaining an individual, conducting a background security or...

Medical record management systems: criticisms and new perspectives.

Science.gov (United States)

Frénot, S; Laforest, F

1999-06-01

The first generation of computerized medical records stored the data as text, but these records did not bring any improvement in information manipulation. The use of a relational database management system (DBMS) has largely solved this problem as it allows for data requests by using SQL. However, this requires data structuring which is not very appropriate to medicine. Moreover, the use of templates and icon user interfaces has introduced a deviation from the paper-based record (still existing). The arrival of hypertext user interfaces has proven to be of interest to fill the gap between the paper-based medical record and its electronic version. We think that further improvement can be accomplished by using a fully document-based system. We present the architecture, advantages and disadvantages of classical DBMS-based and Web/DBMS-based solutions. We also present a document-based solution and explain its advantages, which include communication, security, flexibility and genericity.

Performance of Australian provenances of Eucalyptus grandis and Eucalyptus saligna in Hawaii

Science.gov (United States)

Roger G. Skolmen

1986-01-01

Australian provenances of Eucalyptus grandis and E. saligna were compared at four locations on the island of Hawaii to seek seed sources better than those in current use which were introduced earlier from unrecorded locations in Australia. A broad range of latitude and elevation was represented among the provenances. At all four...

Large angle tracking and high discriminating tracking in nuclear emulsion

International Nuclear Information System (INIS)

Matsuo, Tomokazu; Shibuya, Hiroshi; Ogawa, Satoru; Fukuda, Tsutomu; Mikado, Shoji

2015-01-01

Nuclear emulsion is a high resolution and re-analyzable detector. Conventional “Track Selector” which have angle acceptance |tan θ|<0.6 are widely used to find tracks in emulsion. We made a new track selector “Fine Track Selector” (FTS) which has large angle acceptance and high discriminating ability. The FTS reduces fake tracks using new algorithms, navigation etc. FTS also keeps finding efficiency of tracks around 90% in an angle range of |tan θ| < 3.5. FTS was applied to the τ candidate in OPERA and no additional tracks found. FTS will be useful to our new J-PARC emulsion experiment.

Singularity-Free Neural Control for the Exponential Trajectory Tracking in Multiple-Input Uncertain Systems with Unknown Deadzone Nonlinearities

Directory of Open Access Journals (Sweden)

J. Humberto Pérez-Cruz

2014-01-01

Full Text Available The trajectory tracking for a class of uncertain nonlinear systems in which the number of possible states is equal to the number of inputs and each input is preceded by an unknown symmetric deadzone is considered. The unknown dynamics is identified by means of a continuous time recurrent neural network in which the control singularity is conveniently avoided by guaranteeing the invertibility of the coupling matrix. Given this neural network-based mathematical model of the uncertain system, a singularity-free feedback linearization control law is developed in order to compel the system state to follow a reference trajectory. By means of Lyapunov-like analysis, the exponential convergence of the tracking error to a bounded zone can be proven. Likewise, the boundedness of all closed-loop signals can be guaranteed.

Influence of tracks densities in solid state nuclear track detectors

International Nuclear Information System (INIS)

Guedes O, S.; Hadler N.; Lunes, P.; Saenz T, C.

1996-01-01

When Solid State Nuclear Track Detectors (SSNTD) is employed to measure nuclear tracks produced mainly by fission fragments and alpha particles, it is considered that the tracks observation work is performed under an efficiency, ε 0 , which is independent of the track density (number of tracks/area unit). There are not published results or experimental data supporting such an assumption. In this work the dependence of ε 0 with track density is studied basing on experimental data. To perform this, pieces of CR-39 cut from a sole 'mother sheet' were coupled to thin uranium films for different exposition times and the resulting ratios between track density and exposition time were compared. Our results indicate that ε 0 is constant for track densities between 10 3 and 10 5 cm -2 . At our etching conditions track overlapping makes impossible the counting for densities around 1.7 x 10 5 cm -2 . For track densities less than 10 3 cm -2 , ε 0 , was not observed to be constant. (authors). 4 refs., 2 figs

Quantitative analysis of spider locomotion employing computer-automated video tracking

DEFF Research Database (Denmark)

Baatrup, E; Bayley, M

1993-01-01

The locomotor activity of adult specimens of the wolf spider Pardosa amentata was measured in an open-field setup, using computer-automated colour object video tracking. The x,y coordinates of the animal in the digitized image of the test arena were recorded three times per second during four...

The relationship between fission track length and track density in apatite

International Nuclear Information System (INIS)

Laslett, G.M.; Gleadow, A.J.W.; Duddy, I.R.

1984-01-01

Fission track dating is based upon an age equation derived from a random line segment model for fission tracks. This equation contains the implicit assumption of a proportional relationship between the true mean length of fission tracks and their track density in an isotropic medium. Previous experimental investigation of this relationship for both spontaneous and induced tracks in apatite during progressive annealment model in an obvious fashion. Corrected equations relating track length and density for apatite, an anisotropic mineral, show that the proportionality in this case is between track density and a length factor which is a generalization of the mean track length combining the actual length and crystallographic orientation of the track. This relationship has been experimentally confirmed for induced tracks in Durango apatite, taking into account bias in sampling of the track lengths, and the effect of the bulk etching velocity. (author)

Symplectic Tracking of Multi-Isotopic Heavy-Ion Beams in SixTrack

CERN Document Server

Hermes, Pascal; De Maria, Riccardo

2016-01-01

The software SixTrack provides symplectic proton tracking over a large number of turns. The code is used for the tracking of beam halo particles and the simulation of their interaction with the collimators to study the efficiency of the LHC collimation system. Tracking simulations for heavy-ion beams require taking into account the mass to charge ratio of each particle because heavy ions can be subject to fragmentation at their passage through the collimators. In this paper we present the derivation of a Hamiltonian for multi-isotopic heavy-ion beams and symplectic tracking maps derived from it. The resulting tracking maps were implemented in the tracking software SixTrack. With this modification, SixTrack can be used to natively track heavy-ion beams of multiple isotopes through a magnetic accelerator lattice.

Use of cellulose nitrate plastic track detectors in neutron personnel monitoring

International Nuclear Information System (INIS)

Venkataraman, G.; Marathe, P.K.; Joshi, R.V.

1975-01-01

Cellulose nitrate, which is a sensitive plastic material wherein even proton tracks could be recorded, was studied with a view to using it for personnel neutron monitoring work. It was found that among the commercially available plastics, the colourless transparent Daicel 6000 variety having a thickness of 0.6mm is satisfactory form the point of view of track recognition. The material was exposed to thermal neutrons, fission neutrons, neutrons from an Am-Be source and to 14 MeV neutrons. As is to be expected, there is no thermal neutron sensitivity. The sensitivity to fast neutrons is less by a factor of two as compared to that of the NTA nuclear track emulsion. It was observed that the background tracks found in the plastic correspond to nearly 100 mrem of fast neutron dose equivalent. It is felt that at present cellulose nitrate is useful for monitoring personnel involved in nuclear criticality accidents. (author)

Towards Provenance and Traceability in CRISTAL for HEP

CERN Document Server

Shamdasani, Jetendr; McClatchey, Richard

2014-01-01

This paper discusses the CRISTAL object lifecycle management system and its use in provenance data management and the traceability of system events. This software was initially used to capture the construction and calibration of the CMS ECAL detector at CERN for later use by physicists in their data analysis. Some further uses of CRISTAL in different projects (CMS, neuGRID and N4U) are presented as examples of its flexible data model. From these examples, applications are drawn for the High Energy Physics domain and some initial ideas for its use in data preservation HEP are outlined in detail in this paper. Currently investigations are underway to gauge the feasibility of using the N4U Analysis Service or a derivative of it to address the requirements of data and analysis logging and provenance capture within the HEP long term data analysis environment.

PolarTrack: Optical Outside-In Device Tracking that Exploits Display Polarization

DEFF Research Database (Denmark)

Rädle, Roman; Jetter, Hans-Christian; Fischer, Jonathan

2018-01-01

PolarTrack is a novel camera-based approach to detecting and tracking mobile devices inside the capture volume. In PolarTrack, a polarization filter continuously rotates in front of an off-the-shelf color camera, which causes the displays of observed devices to periodically blink in the camera feed....... The periodic blinking results from the physical characteristics of current displays, which shine polarized light either through an LC overlay to produce images or through a polarizer to reduce light reflections on OLED displays. PolarTrack runs a simple detection algorithm on the camera feed to segment...... displays and track their locations and orientations, which makes PolarTrack particularly suitable as a tracking system for cross-device interaction with mobile devices. Our evaluation of PolarTrack's tracking quality and comparison with state-of-the-art camera-based multi-device tracking showed a better...

Sick-leave track record and other potential predictors of a disability pension. A population based study of 8,218 men and women followed for 16 years

Directory of Open Access Journals (Sweden)

Rosengren Annika

2009-04-01

Full Text Available Abstract Background A number of previous studies have investigated various predictors for being granted a disability pension. The aim of this study was to test the efficacy of sick-leave track record as a predictor of being granted a disability pension in a large dataset based on subjects sampled from the general population and followed for a long time. Methods Data from five ongoing population-based Swedish studies was used, supplemented with data on all compensated sick leave periods, disability pensions granted, and vital status, obtained from official registers. The data set included 8,218 men and women followed for 16 years, generated 109,369 person years of observation and 97,160 sickness spells. Various measures of days of sick leave during follow up were used as independent variables and disability pension grant was used as outcome. Results There was a strong relationship between individual sickness spell duration and annual cumulative days of sick leave on the one hand and being granted a disability pension on the other, among both men and women, after adjustment for the effects of marital status, education, household size, smoking habits, geographical area and calendar time period, a proxy for position in the business cycle. The interval between sickness spells showed a corresponding inverse relationship. Of all the variables studied, the number of days of sick leave per year was the most powerful predictor of a disability pension. For both men and women 245 annual sick leave days were needed to reach a 50% probability of transition to disability. The independent variables, taken together, explained 96% of the variation in disability pension grantings. Conclusion The sick-leave track record was the most important predictor of the probability of being granted a disability pension in this study, even when the influences of other variables affecting the outcome were taken into account.

Direct measurement of the field from a magnetic recording head using an InAs Hall sensor on a contact write/read tester

International Nuclear Information System (INIS)

Gokemeijer, N.J.; Clinton, T.W.; Crawford, T.M.; Johnson, Mark

2005-01-01

At 1 Tbit/in 2 areal density magnetic recording dimensions, reliable magnetic field metrology does not exist. One technique to map the spatial profile of the magnetic field of a write head is to use a contact read/write tester. A magnetic recording head is brought into contact with a Hall sensor, and is subsequently scanned with nm resolution. For a 300 nm track width longitudinal recording head, the magnetic field of the head was mapped. Measurements include the down track field gradient and cross-track field profile and the current-field transfer curve. These results suggest this technique offers a viable write field metrology

The latest succession of dinosaur tracksites in Europe: Hadrosaur ichnology, track production and palaeoenvironments.

Directory of Open Access Journals (Sweden)

Bernat Vila

Full Text Available A comprehensive review and study of the rich dinosaur track record of the Tremp Formation in the southern Pyrenees of Spain (Southwestern Europe shows a unique succession of footprint localities prior to the end-Cretaceous mass extinction event. A description of some 30 new tracksites and data on sedimentary environments, track occurrence and preservation, ichnology and chronostratigraphy are provided. These new track localities represent various facies types within a diverse set of fluvial environments. The footprint discoveries mostly represent hadrosaurian and, less abundantly, to sauropod dinosaurs. The hadrosaur tracks are significantly smaller in size than, but morphologically similar to, those of North America and Asia and are attributable to the ichnogenus Hadrosauropodus. The track succession, with more than 40 distinct track levels, indicates that hadrosaur footprints in the Ibero-Armorican region occur predominantly in the late Maaastrichtian (at least above the early Maastrichtian-late Maastrichtian boundary. The highest abundance is found noticeably found in the late Maastrichtian, with tracks occurring in the C29r magnetochron, within about the latest 300,000 years of the Cretaceous.

Airborne system for mapping and tracking extended gamma ray sources

International Nuclear Information System (INIS)

Stuart, T.P.; Hendricks, T.J.; Wallace, G.G.; Cleland, J.R.

1976-01-01

An airborne system was developed for mapping and tracking extended sources of airborne or terrestrially distributed γ-ray emitters. The system records 300 channel γ-ray spectral data every three seconds on magnetic tape. Computer programs have been written to isolate the contribution from the particular radionuclide of interest. Aircraft position as sensed by a microwave ranging system is recorded every second on magnetic tape. Measurements of airborne stack releases of 41 A concentrations versus time or aircraft position agree well with computer code predictions

Next Generation Cloud-based Science Data Systems and Their Implications on Data and Software Stewardship, Preservation, and Provenance

Science.gov (United States)

Hua, H.; Manipon, G.; Starch, M.

2017-12-01

NASA's upcoming missions are expected to be generating data volumes at least an order of magnitude larger than current missions. A significant increase in data processing, data rates, data volumes, and long-term data archive capabilities are needed. Consequently, new challenges are emerging that impact traditional data and software management approaches. At large-scales, next generation science data systems are exploring the move onto cloud computing paradigms to support these increased needs. New implications such as costs, data movement, collocation of data systems & archives, and moving processing closer to the data, may result in changes to the stewardship, preservation, and provenance of science data and software. With more science data systems being on-boarding onto cloud computing facilities, we can expect more Earth science data records to be both generated and kept in the cloud. But at large scales, the cost of processing and storing global data may impact architectural and system designs. Data systems will trade the cost of keeping data in the cloud with the data life-cycle approaches of moving "colder" data back to traditional on-premise facilities. How will this impact data citation and processing software stewardship? What are the impacts of cloud-based on-demand processing and its affect on reproducibility and provenance. Similarly, with more science processing software being moved onto cloud, virtual machines, and container based approaches, more opportunities arise for improved stewardship and preservation. But will the science community trust data reprocessed years or decades later? We will also explore emerging questions of the stewardship of the science data system software that is generating the science data records both during and after the life of mission.

Proven Alternatives for Aboveground Treatment of Arsenic in Groundwater

Science.gov (United States)

This issue paper, developed for EPA's Engineering Forum, identifies and summarizes experiences with proven aboveground treatment alternatives for arsenic in groundwater, and provides information on their relative effectiveness and cost.

A simple tracking system to monitor solar PV panels

International Nuclear Information System (INIS)

Bentaher, H.; Kaich, H.; Ayadi, N.; Ben Hmouda, M.; Maalej, A.; Lemmer, U.

2014-01-01

Highlights: • We designed and constructed a solar tracking system based on light-dependent resistors (LDRs). • A study was made to determine the optimal angle of LDRs inducing the best precision of the device. • An experimental system was built to test different values of the angle between LDRs. • Results showed a good agreement between the experience and the predicted values. • The obtained results are useful for the design of new trackers based on the use of LDRs. - Abstract: The solar tracking systems are a center of interest of a big number of researchers from the fifties. The deflection of sun rays on a solar photovoltaic panel can reduce its power output until 50%. For concentrators solar trackers are master parts of the systems. A simple tracking system based on light dependent resistors was locally constructed, tested and optimized. Good agreement was recorded between numerical optimization results and experimental ones. These results are useful for the design and construction of new sun trackers

Chrono-thermométrie par traces de fission : une perspective nouvelle pour la prospection pétrolière Chronothermometry by Fission-Track Dating: New Means for Petroleum Prospection

Directory of Open Access Journals (Sweden)

Storzer D.

2006-11-01

Full Text Available La propriété caractéristique des traces de fission d'enregistrer les paléotempératures offre la possibilité unique de caler des événements thermiques dans leur contexte géologique et donc de modéliser quantitativement les histoires thermiques des roches. Le thermomètre traces de fission-apatite enregistre les paléo-températures dans un intervalle compris entre 30 et 170°C, domaine qui inclut les températures généralement retenues pour la genèse optimale des hydrocarbures liquides. La formation, la maturation et la destruction des hydrocarbures, de la même façon que la guérison des traces latentes, sont fonction des deux paramètres temps et températures; en conséquence, l'étude détaillée de l'effacement progressif des traces latentes fossiles dans les apatites en fonction de leur profondeur dans un puits, conduit à des indications précises sur les variations de la température en fonction du temps à l'intérieur de la fenêtre à huile. Ces deux informations sont obtenues en combinant la datation traces de fission-isochrone et les analyses de longueurs des traces de fission. Le potentiel de la méthode des traces de fission dans son application à la reconstitution de l'histoire thermique des bassins sédimentaires est illustré à partir de l'analyse d'apatites détritiques provenant des bassins intérieur et côtier du Gabon d'une part et du bassin d'Otway en Australie du Sud d'autre part. The characteristic property of fission tracks to record paleotemperatures provides a unique possibility of setting thermal events in their geological context and hence of quantitatively modeling the thermal histories of rocks. The fission track apatite-thermometer records paleotemperatures in the interval between 30 and 170°C, a range that includes the temperatures generally considered to be required for the optimum formation of liquid hydrocarbons. The formation, maturation and destruction of hydrocarbons, as well as the

X-ray pulse wavefront metrology using speckle tracking

International Nuclear Information System (INIS)

Berujon, Sebastien; Ziegler, Eric; Cloetens, Peter

2015-01-01

The theoretical description and experimental implementation of a speckle-tracking-based instrument which permits the characterisation of X-ray pulse wavefronts. An instrument allowing the quantitative analysis of X-ray pulsed wavefronts is presented and its processing method explained. The system relies on the X-ray speckle tracking principle to accurately measure the phase gradient of the X-ray beam from which beam optical aberrations can be deduced. The key component of this instrument, a semi-transparent scintillator emitting visible light while transmitting X-rays, allows simultaneous recording of two speckle images at two different propagation distances from the X-ray source. The speckle tracking procedure for a reference-less metrology mode is described with a detailed account on the advanced processing schemes used. A method to characterize and compensate for the imaging detector distortion, whose principle is also based on speckle, is included. The presented instrument is expected to find interest at synchrotrons and at the new X-ray free-electron laser sources under development worldwide where successful exploitation of beams relies on the availability of an accurate wavefront metrology

Proven commercial reactor types: an introduction to their principal advantages and disadvantages

International Nuclear Information System (INIS)

Alesso, H.P.

1981-01-01

This study deals with the principal advantages and disadvantages of the five types of proven commercial reactors. A description of each class of commercial reactor (light water, gas-cooled, and heavy water) and their proven reactors is followed by a comparison of reactor types on the basis of technical merit, economics of operation, availability of technology, and associated political issues. (author)

Distribution, provenance, and onset of the Xiashu Loess in Southeast China with paleoclimatic implications

Science.gov (United States)

Wang, Xiaoyong; Lu, Huayu; Zhang, Hanzhi; Wu, Jiang; Hou, Xiaoxue; Fu, Yu; Geng, Junyan

2018-04-01

Loess deposits are important archives of past climate change in subtropical China, where long-term terrestrial records are scarce. However, only a few long-term records with reliable dating were reported in Jiangsu Province, where loess deposits in southeastern China were first discovered and designated as the Xiashu Loess. Moreover, the provenance of the Xiashu Loess is still controversial. This study presents the magnetostratigraphy and detrital zircon U-Pb age results of loess deposits at Zhoujiashan in Nanjing, Jiangsu Province. To date, this section (with basal age of approximately 0.88 Ma) may be the oldest loess deposits discovered in southeastern China. Based on the detrital zircon U-Pb ages of the Zhoujiashan section, together with published results of geochemistry, geomorphology, sedimentology, and meteorology, we propose that the Xiashu Loess has two mixed sources. Local materials derived from the Yangtze River Basin (including exposed river/lake beds, floodplains, and mountains) served as a major contributor. The distal eolian dust that originated from the arid areas of North China (including deserts, piedmont alluvial fans, and drylands) played a minor role in the formation process of the Xiashu Loess. The nearly synchronous onset age (approximately 0.88-0.85 Ma) of the Xiashu Loess was attributed to a regional environmental event during the middle Pleistocene transition.

Towards Automatic Capturing of Manual Data Processing Provenance

NARCIS (Netherlands)

Wombacher, Andreas; Huq, M.R.

2011-01-01

Often data processing is not implemented by a work ow system or an integration application but is performed manually by humans along the lines of a more or less specified procedure. Collecting provenance information during manual data processing can not be automated. Further, manual collection of

Scab susceptibility of a provenance collection of pecan

Science.gov (United States)

Scab (caused by Fusicladium effusum) is the most economically destructive disease of pecan in the Southeast US. Epidemics are favored by rainfall and high humidity. A provenance collection of ~950 pecan trees from 19 locations representing the native range of the species is located in Byron, Georgia...

EFFECTS OF COLD STRATIFICATION AND GA3 ON GERMINATION OF ARBUTUS UNEDO SEEDS OF THREE PROVENANCES.

Science.gov (United States)

Pipinis, Elias; Stampoulidis, Athanasios; Milios, Elias; Kitikidou, Kyriaki; Radoglou, Kalliopi

2017-01-01

Arbutus unedo is a valuable Mediterranean shrub as an ornamental plant as well as fruit tree. Fresh fruits of A. unedo are a good source of antioxidants, of vitamins C, E and carotenoids and also are characterized by the high content of mineral elements. The effects of gibberellic acid (GA 3 ) and cold stratification (CS) on seed germination performance were investigated in A. unedo seeds collected from three provenances in the Northern part of Greece. Seeds of each provenance were soaked in solutions of GA 3 (500, 1000 or 2000 ppm) for 24 h and subsequently were subjected to CS at 3 - 5°C for 0, 1, 2, and 3 months. Non-stratified seeds of the three A. unedo provenances which were not treated with GA 3 solutions exhibited very low germination. However, seed germination was significantly improved after a one-month period of CS. Similarly, the non-stratified seeds of all three provenances became non-dormant after the treatment with 2000 ppm GA 3 and they germinated at high percentages. However, in untreated seeds with GA3, after a one-month CS period the seeds of the Pieria provenance exhibited higher germination percentage than that of Rodopi provenance seeds. Furthermore, in non-stratified seeds, the Pieria provenance seeds treated with GA3 germinated at higher percentages and more rapidly than those of the other two provenances. The results indicated that untreated seeds exhibited very low germination at 20/25°C. However, in all three provenances seed germinability was significantly improved by a one-month period of CS or treatment of seeds with 2000 ppm GA3. Furthermore, there was a considerable variability among seed provenances in response to the treatments which were applied.

Facilitating Scientific Research through Workflows and Provenance on the DataONE Cyberinfrastructure (Invited)

Science.gov (United States)

Ludaescher, B.; Cuevas-Vicenttín, V.; Missier, P.; Dey, S.; Kianmajd, P.; Wei, Y.; Koop, D.; Chirigati, F.; Altintas, I.; Belhajjame, K.; Bowers, S.

2013-12-01

Provenance data has numerous applications in science. Two key ones are 1) replication: facilitate the repeatable derivation of results and 2) discovery: enable the location of data based on processing history and derivation relationships. The following scenario illustrates a typical use of provenance data. Alice, a climate scientist, has developed a VisTrails workflow to prepare Gross Primary Productivity (GPP) data. After verifying that the workflow generates data in the desired form, she uses the ReproZip tool to create a reproducible package that will enable other scientists to re-run the workflow without having to install and configure the particular libraries she is using. In addition, she exports the provenance information of the workflow execution and customizes it through a tool such as the ProvExplorer, in order to eliminate the information she regards as superfluous. She then creates and shares a DataONE data package containing the data she prepared, the ReproZip package, the customized provenance, and additional science/system metadata. Both the customized provenance and metadata are indexed by the DataONE Cyberinfrastructure (CI) for discovery purposes. Bob, another climate scientist, is looking for a benchmark GPP data to validate the Terrestrial Biosphere Model (TBM) he has developed. Searching the DataONE repository he finds Alice's data package. He retrieves its ReproZip package, customizes it (e.g. changing the spatial resolution), and re-runs it to generate the benchmark data in the form he desires. The newly generated data is then used as input for his own model evaluation workflow. His workflow generates residual maps and a Taylor diagram that enable him to evaluate the similarity between the results of his model and the benchmark data. At this point, Bob can also make use of the tools Alice used to publish his results as another discoverable and reproducible data package. In order to support these capabilities, we propose to extend the Data

Charged projectile spectrometry using solid-state nuclear track detector of the PM-355 type

Directory of Open Access Journals (Sweden)

Malinowska Aneta

2015-09-01

Full Text Available To use effectively any radiation detector in high-temperature plasma experiments, it must have a lot of benefits and fulfill a number of requirements. The most important are: a high energy resolution, linearity over a wide range of recorded particle energy, high detection efficiency for these particles, a long lifetime and resistance to harsh conditions existing in plasma experiments and so on. Solid-state nuclear track detectors have been used in our laboratory in plasma experiments for many years, but recently we have made an attempt to use these detectors in spectroscopic measurements performed on some plasma facilities. This paper presents a method that we used to elaborate etched track diameters to evaluate the incident projectile energy magnitude. The method is based on the data obtained from a semiautomatic track scanning system that selects tracks according to two parameters, track diameter and its mean gray level.

Growth and quality of Grevillea robusta provenances in Ruhande ...

African Journals Online (AJOL)

user

used as sawn timber for furniture industry, for construction and packaging. ... seven Queensland (Australia) provenances and one land race on an oxisol at Ruhande .... Statistical analyses were carried out using Statistical Analysis Systems.

Tool for Automated Retrieval of Generic Event Tracks (TARGET)

Science.gov (United States)

Clune, Thomas; Freeman, Shawn; Cruz, Carlos; Burns, Robert; Kuo, Kwo-Sen; Kouatchou, Jules

2013-01-01

Methods have been developed to identify and track tornado-producing mesoscale convective systems (MCSs) automatically over the continental United States, in order to facilitate systematic studies of these powerful and often destructive events. Several data sources were combined to ensure event identification accuracy. Records of watches and warnings issued by National Weather Service (NWS), and tornado locations and tracks from the Tornado History Project (THP) were used to locate MCSs in high-resolution precipitation observations and GOES infrared (11-micron) Rapid Scan Operation (RSO) imagery. Thresholds are then applied to the latter two data sets to define MCS events and track their developments. MCSs produce a broad range of severe convective weather events that are significantly affecting the living conditions of the populations exposed to them. Understanding how MCSs grow and develop could help scientists improve their weather prediction models, and also provide tools to decision-makers whose goals are to protect populations and their property. Associating storm cells across frames of remotely sensed images poses a difficult problem because storms evolve, split, and merge. Any storm-tracking method should include the following processes: storm identification, storm tracking, and quantification of storm intensity and activity. The spatiotemporal coordinates of the tracks will enable researchers to obtain other coincident observations to conduct more thorough studies of these events. In addition to their tracked locations, their areal extents, precipitation intensities, and accumulations all as functions of their evolutions in time were also obtained and recorded for these events. All parameters so derived can be catalogued into a moving object database (MODB) for custom queries. The purpose of this software is to provide a generalized, cross-platform, pluggable tool for identifying events within a set of scientific data based upon specified criteria with the

Track reconstruction at the ILC: the ILD tracking software

International Nuclear Information System (INIS)

Gaede, Frank; Aplin, Steven; Rosemann, Christoph; Voutsinas, Georgios; Glattauer, Robin

2014-01-01

One of the key requirements for Higgs physics at the International Linear Collider ILC is excellent track reconstruction with very good momentum and impact parameter resolution. ILD is one of the two detector concepts at the ILC. Its central tracking system comprises of an outer Si-tracker, a highly granular TPC, an intermediate silicon tracker and a pixel vertex detector, and it is complemented by silicon tracking disks in the forward direction. Large hit densities from beam induced coherent electron-positron pairs at the ILC pose an additional challenge to the pattern recognition algorithms. We present the recently developed new ILD tracking software, the pattern recognition algorithms that are using clustering techniques, Cellular Automatons and Kalman filter based track extrapolation. The performance of the ILD tracking system is evaluated using a detailed simulation including dead material, gaps and imperfections.

76 FR 28052 - Submission for OMB Review; Comment Request; Interactive Diet and Activity Tracking in AARP (iDATA...

Science.gov (United States)

2011-05-13

...; Comment Request; Interactive Diet and Activity Tracking in AARP (iDATA): Biomarker Based Validation Study...: Interactive Diet and Activity Tracking in AARP (iDATA): Biomarker Based Validation Study. Type of Information...- 742 6 30/60 (.50) 2,227 hour Dietary Recall (ASA24) (Attachment 32). 4-Day Food Record (Attachment 742...

Providing Global Change Information for Decision-Making: Capturing and Presenting Provenance

Science.gov (United States)

Ma, Xiaogang; Fox, Peter; Tilmes, Curt; Jacobs, Katherine; Waple, Anne

2014-01-01

Global change information demands access to data sources and well-documented provenance to provide evidence needed to build confidence in scientific conclusions and, in specific applications, to ensure the information's suitability for use in decision-making. A new generation of Web technology, the Semantic Web, provides tools for that purpose. The topic of global change covers changes in the global environment (including alterations in climate, land productivity, oceans or other water resources, atmospheric composition and or chemistry, and ecological systems) that may alter the capacity of the Earth to sustain life and support human systems. Data and findings associated with global change research are of great public, government, and academic concern and are used in policy and decision-making, which makes the provenance of global change information especially important. In addition, since different types of decisions benefit from different types of information, understanding how to capture and present the provenance of global change information is becoming more of an imperative in adaptive planning.

Studies on fission tracks and distributions of uranium and rare earths in granite materials

International Nuclear Information System (INIS)

Matsuda, Hiroshi; Sakanoue, Masanobu

1987-01-01

Many materials contain fossil records of the slow spontaneous fission of uranium they contain as an impurity. Fission fragments, heavy charged particles released in each fission event, produce microscopic trails of radiation damage that may persist over geological times and may be developed to a size observable under an optical microscope by a suitable etching treatment. Such tracks are also produced by fissions induced by thermal neutron irradiation of the uranium. When the material is heated sufficiently, it anneals and the the microscopic trails become shorter and narrower. The track density decreases, because the chemical etchant will not reach some of the shortened tracks. Measurements of track densities before and after annealing can be used, along with laboratory studies of annealing rates, to determine the annealing temperature. Also, the track density of induced fissions is related to the concentration of uranium and the fluence of neutrons to which it was exposed. If the track density due to induced fissions can be distinguished from that due to fossil tracks, estimates of either the concentration or the fluence can be made if the other is known. Two such materials (one a fragment of a granite paving stone, the other a piece of stained glass from a cathedral window) that had been exposed to the atomic bomb at Nagasaki were used in the present work. The fossil record in zircons in the granite was used to estimate the temperature to which it had been exposed in the bombing. Induced fissions were used to estimate the concentration of uranium in the zircons. Nonuniform heating and cooling and nearly uniform exposure to the neutrons make the granite sample unsuitable for determining the neutron fluence from the bomb. Induced fissions in the stained glass were used to estimate the concentration of uranium and the thermal neutron fluence from the A-bomb. Annealing of tracks in glass was also studied

Towards a Comprehensive and Up-To-Date Institutional Repository: Development of a Publications Tracking Process

KAUST Repository

Baessa, Mohamed

2016-06-15

As our repository matured we found that a concerted effort was needed to establish it as a resource that institutional stakeholders knew they could turn to for reliable information about the research outputs produced by researchers affiliated with or funded by our institution. The initial impetus for this project was the adoption of an institutional open access policy, which necessitated a process to track the publications of institutional authors, deposit items with applicable open access licenses, and notify authors when an accepted manuscript was needed. To support this process we developed a local publications tracking system independent of our hosted DSpace repository that regularly queries publisher and indexer APIs for new publications, checks for relevant permissions policies, identifies institutional authors and helps us send manuscript request emails. We also harvested records for past items and modified our repository to accommodate metadata-only records. The success of these tracking and harvesting services in making our repository comprehensive and up-to-date has allowed us to rely on our repository as the key source of publications information for additional integrations that update ORCID records with publication information, populate a PlumX metrics dashboard and, most recently, support the implementation of a current research information system (CRIS).

Towards a Comprehensive and Up-To-Date Institutional Repository: Development of a Publications Tracking Process

KAUST Repository

Baessa, Mohamed A.; Grenz, Daryl M.; Wang, Han

2016-01-01

As our repository matured we found that a concerted effort was needed to establish it as a resource that institutional stakeholders knew they could turn to for reliable information about the research outputs produced by researchers affiliated with or funded by our institution. The initial impetus for this project was the adoption of an institutional open access policy, which necessitated a process to track the publications of institutional authors, deposit items with applicable open access licenses, and notify authors when an accepted manuscript was needed. To support this process we developed a local publications tracking system independent of our hosted DSpace repository that regularly queries publisher and indexer APIs for new publications, checks for relevant permissions policies, identifies institutional authors and helps us send manuscript request emails. We also harvested records for past items and modified our repository to accommodate metadata-only records. The success of these tracking and harvesting services in making our repository comprehensive and up-to-date has allowed us to rely on our repository as the key source of publications information for additional integrations that update ORCID records with publication information, populate a PlumX metrics dashboard and, most recently, support the implementation of a current research information system (CRIS).

The quantitative determination of uranium in human hair by fission track measurements

International Nuclear Information System (INIS)

Wilson, D.J.; Bentley, K.W.

1985-01-01

Human hairs containing a uranium burden were placed in contact with a mica sheet as the recording matrix and irradiated in a thermal neutron flux. The fission fragment tracks penetrating the mica were etched and counted. Calculations have been made to show the losses due to the fission fragment range being less than the diameter of the hair and for the variation of track density with distance from the line of contact between the hair and the mica. Experimental data from 50 μm diameter hair and those derived by calculation were compared. (author)

Micromagnetic recording model of writer geometry effects at skew

Science.gov (United States)

Plumer, M. L.; Bozeman, S.; van Ek, J.; Michel, R. P.

2006-04-01

The effects of the pole-tip geometry at the air-bearing surface on perpendicular recording at a skew angle are examined through modeling and spin-stand test data. Head fields generated by the finite element method were used to record transitions within our previously described micromagnetic recording model. Write-field contours for a variety of square, rectangular, and trapezoidal pole shapes were evaluated to determine the impact of geometry on field contours. Comparing results for recorded track width, transition width, and media signal to noise ratio at 0° and 15° skew demonstrate the benefits of trapezoidal and reduced aspect-ratio pole shapes. Consistency between these modeled results and test data is demonstrated.

Characteristics of thermally assisted magnetic recording in granular perpendicular media

International Nuclear Information System (INIS)

Shiino, Hirotaka; Kawana, Mayumi; Miyashita, Eiichi; Hayashi, Naoto; Watanabe, Sadayuki

2009-01-01

The effect of thermally assisted magnetic recording using granular perpendicular media with a single-pole-trimmed head has been investigated. A read/write experiment using a spin stand in which the media were heated by laser irradiation demonstrated that the track average amplitude strongly depends on both the position of the write head relative to the center of the laser spot in the down-track direction and on the laser power. Although the signal-to-noise ratio increased with the coercivity of the media, the increment was small; this is thought to be caused by an increase in the switching field distribution of the media with temperature. Our results suggest that the magnetic constant of the media must be optimized with respect to the temperature of writing in order for high-density thermally assisted magnetic recording to be realized

Micromagnetic modeling for heat-assisted magnetic recording

International Nuclear Information System (INIS)

Li Zhenghua; Wei Dan; Wei Fulin

2008-01-01

Heat-assisted magnetic recording (HAMR) is one of the candidate systems beyond the perpendicular recording technology. Here, a micromagnetic model and a heat transfer model are introduced to study the heating and cooling processes in the HAMR media; then, by integration of the SPT head and the laser heating source, the recording performance is simulated and investigated on a single track at an area density of 1 Tb/in 2 . In the HAMR system, the temperature in the medium under the laser wave guide is increased by heating, and decreased by air bearing and heat conduction when the write process really occurred. The target of this study is to find the proper design of the head-laser assembly for optimum recording. It is found that the proper distance between the laser wave guide and the head's main pole rear/front edge is only 41.4/1.4 nm for optimum recording performance

Autumn frost hardiness in Norway spruce plus tree progeny and trees of the local and transferred provenances in central Sweden.

Science.gov (United States)

Hannerz, Mats; Westin, Johan

2005-09-01

Reforestation with provenances from locations remote from the planting site (transferred provenances) or the progeny of trees of local provenances selected for superior form and vigor (plus trees) offer alternative means to increase yield over that obtained by the use of seed from unselected trees of the local provenance. Under Swedish conditions, Norway spruce (Picea abies (L.) Karst.) of certain transferred provenances generally has an advantage in productivity relative to the local provenance comparable to that of progeny of plus trees. The aim of this study was to explore the extent to which productivity gains achieved by provenance transfer or the use of plus tree progeny are associated with reductions in autumn frost hardiness, relative to that of trees of the local provenance. In a field trial with 19-year-old trees in central Sweden, bud hardiness was tested on four occasions during the autumn of 2002. Trees of the local provenance were compared with trees of a south Swedish provenance originating 3 degrees of latitude to the south, a Belarusian provenance and the progeny of plus trees of local origin. The Belarusian provenance was the least hardy and the local provenance the most hardy, with plus tree progeny and the south Swedish provenance being intermediate in hardiness. Both the Belarusian provenance and the plus tree progeny were significantly taller than trees of the other populations. Within provenances, tree height was negatively correlated with autumn frost hardiness. Among the plus tree progeny, however, no such correlation between tree height and autumn frost hardiness was found. It is concluded that although the gain in productivity achieved by provenance transfer from Belarus was comparable to that achieved by using the progeny of plus trees of the local provenance, the use of trees of the Belarus provenance involved an increased risk of autumn frost damage because of later hardening.

Long-term biatrial recordings in post-operative atrial fibrillation.

Science.gov (United States)

Masè, M; Graffigna, A; Sinelli, S; Pallaoro, G; Nollo, G; Ravelli, F

2010-01-01

Although atrial fibrillation (AF) is a common complication of cardiac surgery, its pathophysiology remains unclear. The study of post-operative AF demands for the recording of cardiac electrical activity in correspondence of AF onset and progression. Long-term recordings in post-surgery patients could provide this information, but, to date, have been limited to surface signals, which precludes a characterization of the arrhythmic triggers and substrate. In this study we demonstrate the feasibility of a continuous long-term recording of atrial electrical activities from the right and left atria in post-surgery patients. Local atrial epicardial electrograms are acquired by positioning temporary pacing wires in the right and left atria at the end of the intervention, while three day recordings are obtained by a digital holter recorder, adapted to epicardial signal features. The capability of the system to map local atrial activity and the possibility to obtain quantitative information on atrial rate and synchronization from the processed epicardial signals are proven in representative examples. The quantitative description of local atrial properties opens new perspective in the investigation of post-surgery AF.

Determination of the uranium concentration in water samples by the technique of fission track recording

International Nuclear Information System (INIS)

Geraldo, L.P.

1979-01-01

The technique of fission track register was developed for the determination of micrograms of uranium. The Makrofol KG, a synthetic plastic made by Bayer, was used as the detector and the wet method was utilized. The detector calibration curve allows the determination of the uranium concentration in a sample within an interval from 8.0 to 0.4μgU/L, the total error ranging from 3.3% to 29.0% respectively. The method was used in the determination of the uranium content in various water samples, obtained from various sources like rivers, sea etc. in the state of Sao Paulo, Brazil. Results were compared with those obtained by other authors using different methods. The average concentration found in sea waters (3.27 +- 9.12μgU/l) by this method is compatible with the international average accepted value of 3.3μgU/l, irrespective of site and depth. The determination of the uranium content by fission track counting has proved to be very convenient. (Author) [pt

Energy dependent track structure parametrizations for protons and carbon ions based on nano-metric simulations

International Nuclear Information System (INIS)

Frauke, A.; Wilkens, J.J.; Villagrasa, C.; Rabus, H.

2015-01-01

The BioQuaRT project within the European Metrology Research Programme aims at correlating ion track structure characteristics with the biological effects of radiation and develops measurement and simulation techniques for determining ion track structure on different length scales from about 2 nm to about 10 μm. Within this framework, we investigate methods to translate track-structure quantities derived on a nanometer scale to macroscopic dimensions. Input data sets were generated by simulations of ion tracks of protons and carbon ions in liquid water using the Geant-4 Monte Carlo tool-kit with the Geant-4-DNA processes. Based on the energy transfer points - recorded with nanometer resolution - we investigated parametrizations of overall properties of ion track structure. Three different track structure parametrizations have been developed using the distances to the 10 next neighbouring ionizations, the radial energy distribution and ionisation cluster size distributions. These parametrizations of nanometer-scale track structure build a basis for deriving biologically relevant mean values which are essential in the clinical situation where each voxel is exposed to a mixed radiation field. (authors)

Stratigraphy and sediment provenance of the Karoo Supergroup in Southern Botswana using geochemical indicators

Science.gov (United States)

Diskin, Sorcha; Wendorff, Marek; Lasarwe, Reneilwe

2010-05-01

The Karoo Supergroup of Botswana unconformably overlies Archaean and Proterozoic rocks. They are however, poorly exposed being in turn overlain by up to 200m of Kalahari Beds. This Carboniferous - Jurassic succession comprises sequences of sedimentary and volcanic rocks which are spread across southern Africa. In Botswana, rock complexes have been correlated between widely spaced boreholes based on macroscopically similar appearance and similar position in the succession. In neighbouring South Africa and Namibia these rocks are well exposed and the lithostratigraphy is well constrained by the fossil record. The Karoo units of Botswana have been correlated with these more precisely defined successions on the basis of lithostratigraphy only and are unsupported by other criteria and as such are limited; especially considering the different depositional settings between Botswana and South Africa. Here we present the results of a study of the heavy whole rock geochemistry in an attempt to provide additional, chemostratigraphic criteria for the lower and middle part of the Karoo suite, the Dwyka and Ecca Groups. Analysis of 60 samples for major and trace (including REE) element composition shows a close relation between the geochemical characteristics and stratigraphy. Major elements show that the deltaic material of the Kweneng Formation and Boritse Formation was sourced from recycled continental crust. The basinal mudstone and siltstone below and above fall into an intermediate-mafic igneous field. Most samples have distinct negative europium anomalies (Eu/Eu*=0.49-1.27; av. = 0. 75) and most values are characteristic of sediments of cratonic derivation. A clear shift in (Gd/Yb)N in the basinal pro-delta shales (the Bori Formation) is generally 2.0 or greater, which is typical of an Archean signature, whereas post-Archean rocks usually have (Gd/Yb)N 1.0 - 2.0 as seen for the strata above the delta mouth bars and channels (average 1.6). In a diagram in which (La

Statistical shape modeling based renal volume measurement using tracked ultrasound

Science.gov (United States)

Pai Raikar, Vipul; Kwartowitz, David M.

2017-03-01

Autosomal dominant polycystic kidney disease (ADPKD) is the fourth most common cause of kidney transplant worldwide accounting for 7-10% of all cases. Although ADPKD usually progresses over many decades, accurate risk prediction is an important task.1 Identifying patients with progressive disease is vital to providing new treatments being developed and enable them to enter clinical trials for new therapy. Among other factors, total kidney volume (TKV) is a major biomarker predicting the progression of ADPKD. Consortium for Radiologic Imaging Studies in Polycystic Kidney Disease (CRISP)2 have shown that TKV is an early, and accurate measure of cystic burden and likely growth rate. It is strongly associated with loss of renal function.3 While ultrasound (US) has proven as an excellent tool for diagnosing the disease; monitoring short-term changes using ultrasound has been shown to not be accurate. This is attributed to high operator variability and reproducibility as compared to tomographic modalities such as CT and MR (Gold standard). Ultrasound has emerged as one of the standout modality for intra-procedural imaging and with methods for spatial localization has afforded us the ability to track 2D ultrasound in physical space which it is being used. In addition to this, the vast amount of recorded tomographic data can be used to generate statistical shape models that allow us to extract clinical value from archived image sets. In this work, we aim at improving the prognostic value of US in managing ADPKD by assessing the accuracy of using statistical shape model augmented US data, to predict TKV, with the end goal of monitoring short-term changes.

Records Group. The problem of fonds in the American archival studies

Directory of Open Access Journals (Sweden)

Bartosz Nowożycki

2017-12-01

Full Text Available The term record group means a group of fonds (records and it is a type of archival fonds rarely described in Polish archival literature. Most often it is associated with the complex archival fonds, due to its comlicated structure and blurred borderlines – an effect of administrative system varying from the Polish one. The post-war attempts to modify and broaden the meaning of the complex fonds caused its resemblance to the term record group. Irena Radtke in her paper given during the 6th Archival Methods Conference in Warsaw in 1970 proposed, that the complex fonds should be one comprising records of foreign provenance that are an effect of passive succession. Bohdan Ryszewski, addressing Radtke’s idea, noticed that passive succession might be a source of complications. However, this conceptualization of the definition of the complex fonds did not correspond with the American understanding of it as an above-fonds structure.Bogdan Kroll has touched the core of the problem; he noticed that an archival construction comprising materials of various provenances cannot be seen neither as an archival fonds, nor as a complex fonds. He saw a discrepancy between the structure and partition of archival holdings and archival theory; thus Kroll proposed abandoning the term complex fonds and implementation of the term archival complex. The archival complex was supposed to be archival materials of various origins merged (in or outside of an archive into fonds, or parts of archival fonds of different institutions having the same characteristic – function. The complex was supposed to make up a separate entity in logic structure of archival holdings, comprising of all archival fonds and/or their pieces being parts of the main fonds of the complex. The problem of lack of above-fonds forms in the Polish archival theory has been also noticed by Józef Siemieński, who has formulated the term of higher-order fonds. According to his idea the higher

Rats track odour trails accurately using a multi-layered strategy with near-optimal sampling.

Science.gov (United States)

Khan, Adil Ghani; Sarangi, Manaswini; Bhalla, Upinder Singh

2012-02-28

Tracking odour trails is a crucial behaviour for many animals, often leading to food, mates or away from danger. It is an excellent example of active sampling, where the animal itself controls how to sense the environment. Here we show that rats can track odour trails accurately with near-optimal sampling. We trained rats to follow odour trails drawn on paper spooled through a treadmill. By recording local field potentials (LFPs) from the olfactory bulb, and sniffing rates, we find that sniffing but not LFPs differ between tracking and non-tracking conditions. Rats can track odours within ~1 cm, and this accuracy is degraded when one nostril is closed. Moreover, they show path prediction on encountering a fork, wide 'casting' sweeps on encountering a gap and detection of reappearance of the trail in 1-2 sniffs. We suggest that rats use a multi-layered strategy, and achieve efficient sampling and high accuracy in this complex task.

Magnetic Force Microscopy Observation of Perpendicular Recording Head Remanence

Science.gov (United States)

Dilekrojanavuti, P.; Saengkaew, K.; Cheowanish, I.; Damrongsak, B.

2017-09-01

In this work, magnetic force microscopy (MFM) was utilized to observe the magnetic write head remanence, which is the remaining out-of-plane magnetic field on magnetic write heads after a write current is turned off. This remnant field can write unwanted tracks or erase written tracks on a magnetic media. The write head remanence can also occur from device and slider fabrication, either by applying current to the write coil during the inspection or biasing the external magnetic field to magnetic recording heads. This remanence can attract magnetic nanoparticles, which is suspended in cleaning water or surrounding air, and cause device contamination. MFM images were used to examine locations of the remnant field on the surface of magnetic recording heads. Experimental results revealed that the remanence occurred mostly on the shield and is dependent on the initial direction of magnetic moments. In addition, we demonstrated a potential use of MFM imaging to investigate effects of different etching gases on the head remanence.

Opening Up Climate Research: A Linked Data Approach to Publishing Data Provenance

Directory of Open Access Journals (Sweden)

Arif Shaon

2012-03-01

Full Text Available Traditionally, the formal scientific output in most fields of natural science has been limited to peer-reviewed academic journal publications, with less attention paid to the chain of intermediate data results and their associated metadata, including provenance. In effect, this has constrained the representation and verification of the data provenance to the confines of the related publications. Detailed knowledge of a dataset’s provenance is essential to establish the pedigree of the data for its effective re-use, and to avoid redundant re-enactment of the experiment or computation involved. It is increasingly important for open-access data to determine their authenticity and quality, especially considering the growing volumes of datasets appearing in the public domain. To address these issues, we present an approach that combines the Digital Object Identifier (DOI – a widely adopted citation technique – with existing, widely adopted climate science data standards to formally publish detailed provenance of a climate research dataset as an associated scientific workflow. This is integrated with linked-data compliant data re-use standards (e.g. OAI-ORE to enable a seamless link between a publication and the complete trail of lineage of the corresponding dataset, including the dataset itself.

Neutron activation analysis: a powerful tool in provenance investigations

International Nuclear Information System (INIS)

Meloni, Sandro; Oddone, Massimo

2002-01-01

It is well known that neutron activation analysis (NAA), both instrumental and destructive, allows the simultaneous determination of a number of elements, mostly trace elements, with high levels of precision and accuracy. These peculiar properties of NAA are very useful when applied to provenance studies, i.e. to the identification of the origin of raw materials with which artifacts had been manufactured in ancient times. Data reduction by statistical procedures, especially multivariate analysis techniques, provides a statistical 'fingerprint' of investigated materials, both raw materials and archaeological artifacts, that, upon comparison, allows the identification of the provenance of prime matters used for artifact manufacturing. Thus information on quarries and flows exploitation in the antiquity, on technological raw materials processing, on trade routes and about the circulation of fakes, can be obtained. In the present paper two case studies are reported. The first one deals with the identification of the provenance of clay used to make ceramic materials, mostly bricks and tiles, recovered from the excavation of a Roman 'villa' in Lomello (Roman name Laumellum) and of Roman settlings in Casteggio (Roman name Clastidium). Both sites are located in the Province of Pavia in areas called Lomellina and Oltrepo respectively. The second one investigates the origin of the white marble used to build medieval arks, Carolingian age, located in the church of San Felice, now property of the University of Pavia. Experimental set-up, analytical results and data reduction procedures are presented and discussed. (author)

Defining the "proven technology" technical criterion in the reactor technology assessment for Malaysia's nuclear power program

Science.gov (United States)

Anuar, Nuraslinda; Kahar, Wan Shakirah Wan Abdul; Manan, Jamal Abdul Nasir Abd

2015-04-01

Developing countries that are considering the deployment of nuclear power plants (NPPs) in the near future need to perform reactor technology assessment (RTA) in order to select the most suitable reactor design. The International Atomic Energy Agency (IAEA) reported in the Common User Considerations (CUC) document that "proven technology" is one of the most important technical criteria for newcomer countries in performing the RTA. The qualitative description of five desired features for "proven technology" is relatively broad and only provides a general guideline to its characterization. This paper proposes a methodology to define the "proven technology" term according to a specific country's requirements using a three-stage evaluation process. The first evaluation stage screens the available technologies in the market against a predefined minimum Technology Readiness Level (TRL) derived as a condition based on national needs and policy objectives. The result is a list of technology options, which are then assessed in the second evaluation stage against quantitative definitions of CUC desired features for proven technology. The potential technology candidates produced from this evaluation is further narrowed down to obtain a list of proven technology candidates by assessing them against selected risk criteria and the established maximum allowable total score using a scoring matrix. The outcome of this methodology is the proven technology candidates selected using an accurate definition of "proven technology" that fulfills the policy objectives, national needs and risk, and country-specific CUC desired features of the country that performs this assessment. A simplified assessment for Malaysia is carried out to demonstrate and suggest the use of the proposed methodology. In this exercise, ABWR, AP1000, APR1400 and EPR designs assumed the top-ranks of proven technology candidates according to Malaysia's definition of "proven technology".

Strabismus Recognition Using Eye-Tracking Data and Convolutional Neural Networks

Directory of Open Access Journals (Sweden)

Zenghai Chen

2018-01-01

Full Text Available Strabismus is one of the most common vision diseases that would cause amblyopia and even permanent vision loss. Timely diagnosis is crucial for well treating strabismus. In contrast to manual diagnosis, automatic recognition can significantly reduce labor cost and increase diagnosis efficiency. In this paper, we propose to recognize strabismus using eye-tracking data and convolutional neural networks. In particular, an eye tracker is first exploited to record a subject’s eye movements. A gaze deviation (GaDe image is then proposed to characterize the subject’s eye-tracking data according to the accuracies of gaze points. The GaDe image is fed to a convolutional neural network (CNN that has been trained on a large image database called ImageNet. The outputs of the full connection layers of the CNN are used as the GaDe image’s features for strabismus recognition. A dataset containing eye-tracking data of both strabismic subjects and normal subjects is established for experiments. Experimental results demonstrate that the natural image features can be well transferred to represent eye-tracking data, and strabismus can be effectively recognized by our proposed method.

Vehicle response-based track geometry assessment using multi-body simulation

Science.gov (United States)

Kraft, Sönke; Causse, Julien; Coudert, Frédéric

2018-02-01

The assessment of the geometry of railway tracks is an indispensable requirement for safe rail traffic. Defects which represent a risk for the safety of the train have to be identified and the necessary measures taken. According to current standards, amplitude thresholds are applied to the track geometry parameters measured by recording cars. This geometry-based assessment has proved its value but suffers from the low correlation between the geometry parameters and the vehicle reactions. Experience shows that some defects leading to critical vehicle reactions are underestimated by this approach. The use of vehicle responses in the track geometry assessment process allows identifying critical defects and improving the maintenance operations. This work presents a vehicle response-based assessment method using multi-body simulation. The choice of the relevant operation conditions and the estimation of the simulation uncertainty are outlined. The defects are identified from exceedances of track geometry and vehicle response parameters. They are then classified using clustering methods and the correlation with vehicle response is analysed. The use of vehicle responses allows the detection of critical defects which are not identified from geometry parameters.

Institutional factors in resource recovery co-disposal demonstration project, Middlesex County, New Jersey, Spring 1980 - Summer 1981

Science.gov (United States)

McCarthy, R. M.

1982-02-01

A proposal to provide 1200 tons per day of solid waste disposal combined with 200 tons per day of sludge disposal was presented. The prospects for codisposal in Middlesex County were analyzed. Technically, codisposal was possible, however, it lacked a proven track record. Proposal for a resource recovery plant to be designed, built, and operated was acknowledged as consistent with County planning.

Pacing in Olympic track races: competitive tactics versus best performance strategy.

Science.gov (United States)

Thiel, Christian; Foster, Carl; Banzer, Winfried; De Koning, Jos

2012-01-01

The purpose of this study was to describe pacing strategies in the 800 to 10,000-m Olympic finals. We asked 1) if Olympic finals differed from World Records, 2) how variable the pace was, 3) whether runners faced catastrophic events, and 4) for the winning strategy. Publically available data from the Beijing 2008 Olympic Games gathered by four transponder antennae under the 400-m track were analysed to extract descriptors of pacing strategies. Individual pacing patterns of 133 finalists were visualised using speed by distance plots. Six of eight plots differed from the patterns reported for World Records. The coefficient of running speed variation was 3.6-11.4%. In the long distance finals, runners varied their pace every 100 m by a mean 1.6-2.7%. Runners who were 'dropped' from the field achieved a stable running speed and displayed an endspurt. Top contenders used variable pacing strategies to separate themselves from the field. All races were decided during the final lap. Olympic track finalists employ pacing strategies which are different from World Record patterns. The observed micro- and macro-variations of pace may have implications for training programmes. Dropping off the pace of the leading group is an active step, and the result of interactive psychophysiological decision making.

Frequent Pattern Mining of Eye-Tracking Records Partitioned into Cognitive Chunks

Directory of Open Access Journals (Sweden)

Noriyuki Matsuda

2014-01-01

Full Text Available Assuming that scenes would be visually scanned by chunking information, we partitioned fixation sequences of web page viewers into chunks using isolate gaze point(s as the delimiter. Fixations were coded in terms of the segments in a 5×5 mesh imposed on the screen. The identified chunks were mostly short, consisting of one or two fixations. These were analyzed with respect to the within- and between-chunk distances in the overall records and the patterns (i.e., subsequences frequently shared among the records. Although the two types of distances were both dominated by zero- and one-block shifts, the primacy of the modal shifts was less prominent between chunks than within them. The lower primacy was compensated by the longer shifts. The patterns frequently extracted at three threshold levels were mostly simple, consisting of one or two chunks. The patterns revealed interesting properties as to segment differentiation and the directionality of the attentional shifts.

When Personal Tracking Becomes Social: Examining the Use of Instagram for Healthy Eating

Science.gov (United States)

Chung, Chia-Fang; Agapie, Elena; Schroeder, Jessica; Mishra, Sonali; Fogarty, James; Munson, Sean A.

2017-01-01

Many people appropriate social media and online communities in their pursuit of personal health goals, such as healthy eating or increased physical activity. However, people struggle with impression management, and with reaching the right audiences when they share health information on these platforms. Instagram, a popular photo-based social media platform, has attracted many people who post and share their food photos. We aim to inform the design of tools to support healthy behaviors by understanding how people appropriate Instagram to track and share food data, the benefits they obtain from doing so, and the challenges they encounter. We interviewed 16 women who consistently record and share what they eat on Instagram. Participants tracked to support themselves and others in their pursuit of healthy eating goals. They sought social support for their own tracking and healthy behaviors and strove to provide that support for others. People adapted their personal tracking practices to better receive and give this support. Applying these results to the design of health tracking tools has the potential to help people better access social support. PMID:28516174

When Personal Tracking Becomes Social: Examining the Use of Instagram for Healthy Eating.

Science.gov (United States)

Chung, Chia-Fang; Agapie, Elena; Schroeder, Jessica; Mishra, Sonali; Fogarty, James; Munson, Sean A

2017-05-02

Many people appropriate social media and online communities in their pursuit of personal health goals, such as healthy eating or increased physical activity. However, people struggle with impression management, and with reaching the right audiences when they share health information on these platforms. Instagram, a popular photo-based social media platform, has attracted many people who post and share their food photos. We aim to inform the design of tools to support healthy behaviors by understanding how people appropriate Instagram to track and share food data, the benefits they obtain from doing so, and the challenges they encounter. We interviewed 16 women who consistently record and share what they eat on Instagram. Participants tracked to support themselves and others in their pursuit of healthy eating goals. They sought social support for their own tracking and healthy behaviors and strove to provide that support for others. People adapted their personal tracking practices to better receive and give this support. Applying these results to the design of health tracking tools has the potential to help people better access social support.

The impact of oil price on additions to US proven reserves

International Nuclear Information System (INIS)

Farzin, Y.H.

2001-01-01

Departing from Hotelling's assumption of fixed and known reserves, this paper develops an economic model of additions to proven reserves that explicitly incorporates the effects of expected resource price, cumulative reserves development, and technological progress on reserve additions. The model treats additions to proven oil reserves as output of a production process in which drilling wells is a primary input to transform some of oil-in-place into the economic category of proven reserves. Application of the model to US data for the 1950-1995 period provides strong statistical support for the existence of all the three salient effects. We obtain an estimate of the price elasticity of reserve additions (absent from previous studies) which, although statistically highly significant, is rather small. Using this price elasticity estimate, it is shown that if in the face of steady economic growth, and hence, oil consumption, US oil import dependence is to be kept from rising in the future, ceteris paribus, a steady oil price increase in the range of 1.5-4.5% a year is essential

Provenance of the lower Miocene of the Gulf of Mexico from detrital zircon double dating

Science.gov (United States)

xu, J.

2013-12-01

The lower Miocene interval of the Gulf of Mexico (GOM) has recently gained increasing attention from oil and gas industry due to its hydrocarbon potential below the salt canopy. However, it has been less well studied than both the underlying Oligocene and overlying middle Miocene strata. The lower Miocene worldwide is a transitional period of tectonic, climatic, and oceanographic change. In particular, it is a period of major tectonic reorganization in the western interior of North America (Rocky Mountains), involving a shift from the Oligocene thermal phase, with abundant volcanic activity recorded in the thick Frio/Vicksburg succession of the GOM, to the Miocene Basin-Range extensional phase. Climatic conditions also changed from a relatively arid Oligocene to wetter Miocene, resulting in increased sediment yields from exhumed tectonic structures. Previous provenance studies used proportions of quartz, feldspar and lithic fragments and consideration of likely river courses through known paleogeomorphological elements. Only limited detrital zircon (DZ) U-Pb studies on Paleocene strata have been undertaken and there has been no previous U-Pb and (U-Th)/He double dating in the GOM. In this study we apply the latest analytical approaches, such as DZ U-Pb dating to gain robust source terranes ages and more fully elucidate the complex sediment provenance and dispersal history of GOM. We also employ DZ (U-Th)/He (ZHe) dating, combined with DZ U-Pb, to not only define sedimentary provenance but also the exhumation histories of detrital source regions. Samples of lower Miocene outcrop exposures in Texas and Louisiana have been collected to discriminate the varied tectonic and drainage system changes across the basin in lateral. In addition, samples from the Eocene, Oligocene and middle Miocene have been obtained to reveal vertical shift of source terranes contributions. Our initial age data show detrital zircons of lower Miocene sediments come from a wide range of source

Effectiveness of an Automatic Tracking Software in Underwater Motion Analysis

Directory of Open Access Journals (Sweden)

Fabrício A. Magalhaes

2013-12-01

Full Text Available Tracking of markers placed on anatomical landmarks is a common practice in sports science to perform the kinematic analysis that interests both athletes and coaches. Although different software programs have been developed to automatically track markers and/or features, none of them was specifically designed to analyze underwater motion. Hence, this study aimed to evaluate the effectiveness of a software developed for automatic tracking of underwater movements (DVP, based on the Kanade-Lucas-Tomasi feature tracker. Twenty-one video recordings of different aquatic exercises (n = 2940 markers’ positions were manually tracked to determine the markers’ center coordinates. Then, the videos were automatically tracked using DVP and a commercially available software (COM. Since tracking techniques may produce false targets, an operator was instructed to stop the automatic procedure and to correct the position of the cursor when the distance between the calculated marker’s coordinate and the reference one was higher than 4 pixels. The proportion of manual interventions required by the software was used as a measure of the degree of automation. Overall, manual interventions were 10.4% lower for DVP (7.4% than for COM (17.8%. Moreover, when examining the different exercise modes separately, the percentage of manual interventions was 5.6% to 29.3% lower for DVP than for COM. Similar results were observed when analyzing the type of marker rather than the type of exercise, with 9.9% less manual interventions for DVP than for COM. In conclusion, based on these results, the developed automatic tracking software presented can be used as a valid and useful tool for underwater motion analysis.

A simplified Track Assembler I/O for the Muon Trigger Track Finder

CERN Document Server

Dallavalle, Gaetano-Marco; Genchev, Vladimir; Grandi, Claudio; Neumeister, Norbert; Porth, Paul; Rohringer, Herbert

1998-01-01

One of the architectural concerns in the present design of the Muon Trigger Track Finder ( MTTF) is the large number of inputs to the Track Assembler ( TA). In the TA block, input track segment pairs from many Extrapolation Units ( EU) are associated into tracks. The relative contribution of these inputs to the assembled tracks is studied with simulated track patterns for low and high pt muons over the entire eta, phi acceptance of the CMS barrel. A pruning of the EUs is proposed which does not alter the performance of the Track Finder and minimizes the interconnections between azimuthal wedges.

Drought effects on root and needle terpenoid content of a coastal and an interior Douglas fir provenance.

Science.gov (United States)

Kleiber, Anita; Duan, Qiuxiao; Jansen, Kirstin; Verena Junker, Laura; Kammerer, Bernd; Rennenberg, Heinz; Ensminger, Ingo; Gessler, Arthur; Kreuzwieser, Jürgen

2017-12-01

Douglas fir (Pseudotsuga menziesii) is a conifer species that stores large amounts of terpenoids, mainly monoterpenoids in resin ducts of various tissues. The effects of drought on stored leaf terpenoid concentrations in trees are scarcely studied and published data are partially controversial, since reduced, unaffected or elevated terpenoid contents due to drought have been reported. Even less is known on the effect of drought on root terpenoids. In the present work, we investigated the effect of reduced water availability on the terpenoid content in roots and needles of Douglas fir seedlings. Two contrasting Douglas fir provenances were studied: an interior provenance (var. glauca) with assumed higher drought resistance, and a coastal provenance (var. menziesii) with assumed lower drought resistance. We tested the hypothesis that both provenances show specific patterns of stored terpenoids and that the patterns will change in response to drought in both, needles and roots. We further expected stronger changes in the less drought tolerant coastal provenance. For this purpose, we performed an experiment under controlled conditions, in which the trees were exposed to moderate and severe drought stress. According to our expectations, the study revealed clear provenance-specific terpenoid patterns in needles. However, such patterns were not detected in the roots. Drought slightly increased the needle terpenoid contents of the coastal but not of the interior provenance. We also observed increased terpenoid abundance mainly in roots of the moderately stressed coastal provenance. Overall, from the observed provenance-specific reactions with increased terpenoid levels in trees of the coastal origin in response to drought, we conclude on functions of terpenoids for abiotic stress tolerance that might be fulfilled by other, constitutively expressed mechanisms in drought-adapted interior provenances. © The Author 2017. Published by Oxford University Press. All rights

Platelet Counts, MPV and PDW in Culture Proven and Probable Neonatal Sepsis and Association of Platelet Counts with Mortality Rate

International Nuclear Information System (INIS)

Ahmad, M. S.; Waheed, A.

2014-01-01

Objective: To determine frequency of thrombocytopenia and thrombocytosis, the MPV (mean platelet volume) and PDW (platelet distribution width) in patients with probable and culture proven neonatal sepsis and determine any association between platelet counts and mortality rate. Study Design: Descriptive analytical study. Place and Duration of Study: NICU, Fazle Omar Hospital, from January 2011 to December 2012. Methodology: Cases of culture proven and probable neonatal sepsis, admitted in Fazle Omar Hospital, Rabwah, were included in the study. Platelet counts, MPV and PDW of the cases were recorded. Mortality was documented. Frequencies of thrombocytopenia ( 450000/mm3) were ascertained. Mortality rates in different groups according to platelet counts were calculated and compared by chi-square test to check association. Results: Four hundred and sixty nine patients were included; 68 (14.5%) of them died. One hundred and thirty six (29%) had culture proven sepsis, and 333 (71%) were categorized as probable sepsis. Thrombocytopenia was present in 116 (24.7%), and thrombocytosis was present in 36 (7.7%) cases. Median platelet count was 213.0/mm3. Twenty eight (27.7%) patients with thrombocytopenia, and 40 (12.1%) cases with normal or raised platelet counts died (p < 0.001). Median MPV was 9.30, and median PDW was 12.30. MPV and PDW of the patients who died and who were discharged were not significantly different from each other. Conclusion: Thrombocytopenia is a common complication of neonatal sepsis. Those with thrombocytopenia have higher mortality rate. No significant difference was present between PDW and MPV of the cases who survived and died. (author)

Fiber tracking for brain tumor

International Nuclear Information System (INIS)

Yamada, Kei; Nakamura, Hisao; Ito, Hirotoshi; Tanaka, Osamu; Kubota, Takao; Yuen, Sachiko; Kizu, Osamu; Nishimura, Tsunehiko

2003-01-01

The purpose of this study was to validate an innovative scanning method for patients diagnosed with brain tumors. Using a 1.5 Tesla whole body magnetic resonance (MR) imager, 23 patients with brain tumors were scanned. The recorded data points of the diffusion-tensor imaging (DTI) sequences were 128 x 37 with the parallel imaging technique. The parallel imaging technique was equivalent to a true resolution of 128 x 74. The scan parameters were repetition time (TR)=6000, echo time (TE)=88, 6 averaging with a b-value of 800 s/mm 2 . The total scan time for DTI was 4 minutes and 24 seconds. DTI scans and subsequent fiber tracking were successfully applied in all cases. All fiber tracts on the contralesional side were visualized in the expected locations. Fiber tracts on the lesional side had varying degrees of displacement, disruption, or a combination of displacement and disruption due to the tumor. Tract disruption resulted from direct tumor involvement, compression upon the tract, and vasogenic edema surrounding the tumor. This DTI method using a parallel imaging technique allows for clinically feasible fiber tracking that can be incorporated into a routine MR examination. (author)

Particle Filter with Integrated Voice Activity Detection for Acoustic Source Tracking

Directory of Open Access Journals (Sweden)

Anders M. Johansson

2007-01-01

Full Text Available In noisy and reverberant environments, the problem of acoustic source localisation and tracking (ASLT using an array of microphones presents a number of challenging difficulties. One of the main issues when considering real-world situations involving human speakers is the temporally discontinuous nature of speech signals: the presence of silence gaps in the speech can easily misguide the tracking algorithm, even in practical environments with low to moderate noise and reverberation levels. A natural extension of currently available sound source tracking algorithms is the integration of a voice activity detection (VAD scheme. We describe a new ASLT algorithm based on a particle filtering (PF approach, where VAD measurements are fused within the statistical framework of the PF implementation. Tracking accuracy results for the proposed method is presented on the basis of synthetic audio samples generated with the image method, whereas performance results obtained with a real-time implementation of the algorithm, and using real audio data recorded in a reverberant room, are published elsewhere. Compared to a previously proposed PF algorithm, the experimental results demonstrate the improved robustness of the method described in this work when tracking sources emitting real-world speech signals, which typically involve significant silence gaps between utterances.

Solar tracking system

Science.gov (United States)

Okandan, Murat; Nielson, Gregory N.

2016-07-12

Solar tracking systems, as well as methods of using such solar tracking systems, are disclosed. More particularly, embodiments of the solar tracking systems include lateral supports horizontally positioned between uprights to support photovoltaic modules. The lateral supports may be raised and lowered along the uprights or translated to cause the photovoltaic modules to track the moving sun.

One of the first heavy-ion collisions with stable beams recorded by ATLAS in November 2015.

CERN Multimedia

ATLAS Collaboration

2015-01-01

One of the first heavy-ion collisions with stable beams recorded by ATLAS in November 2015. Tracks reconstructed from hits in the inner tracking detector are shown as orange arcs curving in the solenoidal magnetic field. The green and yellow bars indicate energy deposits in the Liquid Argon and Scintillating Tile calorimeters respectively.

Three-dimensional, automated, real-time video system for tracking limb motion in brain-machine interface studies.

Science.gov (United States)

Peikon, Ian D; Fitzsimmons, Nathan A; Lebedev, Mikhail A; Nicolelis, Miguel A L

2009-06-15

Collection and analysis of limb kinematic data are essential components of the study of biological motion, including research into biomechanics, kinesiology, neurophysiology and brain-machine interfaces (BMIs). In particular, BMI research requires advanced, real-time systems capable of sampling limb kinematics with minimal contact to the subject's body. To answer this demand, we have developed an automated video tracking system for real-time tracking of multiple body parts in freely behaving primates. The system employs high-contrast markers painted on the animal's joints to continuously track the three-dimensional positions of their limbs during activity. Two-dimensional coordinates captured by each video camera are combined and converted to three-dimensional coordinates using a quadratic fitting algorithm. Real-time operation of the system is accomplished using direct memory access (DMA). The system tracks the markers at a rate of 52 frames per second (fps) in real-time and up to 100fps if video recordings are captured to be later analyzed off-line. The system has been tested in several BMI primate experiments, in which limb position was sampled simultaneously with chronic recordings of the extracellular activity of hundreds of cortical cells. During these recordings, multiple computational models were employed to extract a series of kinematic parameters from neuronal ensemble activity in real-time. The system operated reliably under these experimental conditions and was able to compensate for marker occlusions that occurred during natural movements. We propose that this system could also be extended to applications that include other classes of biological motion.

Provenance metadata gathering and cataloguing of EFIT++ code execution

Energy Technology Data Exchange (ETDEWEB)

Lupelli, I., E-mail: ivan.lupelli@ccfe.ac.uk [CCFE, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom); Muir, D.G.; Appel, L.; Akers, R.; Carr, M. [CCFE, Culham Science Centre, Abingdon, Oxon OX14 3DB (United Kingdom); Abreu, P. [Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa (Portugal)

2015-10-15

Highlights: • An approach for automatic gathering of provenance metadata has been presented. • A provenance metadata catalogue has been created. • The overhead in the code runtime is less than 10%. • The metadata/data size ratio is about ∼20%. • A visualization interface based on Gephi, has been presented. - Abstract: Journal publications, as the final product of research activity, are the result of an extensive complex modeling and data analysis effort. It is of paramount importance, therefore, to capture the origins and derivation of the published data in order to achieve high levels of scientific reproducibility, transparency, internal and external data reuse and dissemination. The consequence of the modern research paradigm is that high performance computing and data management systems, together with metadata cataloguing, have become crucial elements within the nuclear fusion scientific data lifecycle. This paper describes an approach to the task of automatically gathering and cataloguing provenance metadata, currently under development and testing at Culham Center for Fusion Energy. The approach is being applied to a machine-agnostic code that calculates the axisymmetric equilibrium force balance in tokamaks, EFIT++, as a proof of principle test. The proposed approach avoids any code instrumentation or modification. It is based on the observation and monitoring of input preparation, workflow and code execution, system calls, log file data collection and interaction with the version control system. Pre-processing, post-processing, and data export and storage are monitored during the code runtime. Input data signals are captured using a data distribution platform called IDAM. The final objective of the catalogue is to create a complete description of the modeling activity, including user comments, and the relationship between data output, the main experimental database and the execution environment. For an intershot or post-pulse analysis (∼1000

Provenance metadata gathering and cataloguing of EFIT++ code execution

International Nuclear Information System (INIS)

Lupelli, I.; Muir, D.G.; Appel, L.; Akers, R.; Carr, M.; Abreu, P.

2015-01-01

Highlights: • An approach for automatic gathering of provenance metadata has been presented. • A provenance metadata catalogue has been created. • The overhead in the code runtime is less than 10%. • The metadata/data size ratio is about ∼20%. • A visualization interface based on Gephi, has been presented. - Abstract: Journal publications, as the final product of research activity, are the result of an extensive complex modeling and data analysis effort. It is of paramount importance, therefore, to capture the origins and derivation of the published data in order to achieve high levels of scientific reproducibility, transparency, internal and external data reuse and dissemination. The consequence of the modern research paradigm is that high performance computing and data management systems, together with metadata cataloguing, have become crucial elements within the nuclear fusion scientific data lifecycle. This paper describes an approach to the task of automatically gathering and cataloguing provenance metadata, currently under development and testing at Culham Center for Fusion Energy. The approach is being applied to a machine-agnostic code that calculates the axisymmetric equilibrium force balance in tokamaks, EFIT++, as a proof of principle test. The proposed approach avoids any code instrumentation or modification. It is based on the observation and monitoring of input preparation, workflow and code execution, system calls, log file data collection and interaction with the version control system. Pre-processing, post-processing, and data export and storage are monitored during the code runtime. Input data signals are captured using a data distribution platform called IDAM. The final objective of the catalogue is to create a complete description of the modeling activity, including user comments, and the relationship between data output, the main experimental database and the execution environment. For an intershot or post-pulse analysis (∼1000

A history-tracing XML-based provenance framework for workflows

NARCIS (Netherlands)

Gerhards, M; Belloum, A.; Berretz, F.; Sander, V.; Skorupa, S.

2010-01-01

The importance of validating and reproducing the outcome of computational processes is fundamental to many application domains. Assuring the provenance of workflows will likely become even more important with respect to the incorporation of human tasks to standard workflows by emerging standards

Record of the solar corpuscular radiation in minerals from lunar soils - A comparative study of noble gases and tracks

International Nuclear Information System (INIS)

Wieler, R.; Etique, P.

1980-01-01

A comparative study is made of trapped light noble gases and solar flare tracks in mineral separates from lunar soils in an investigation aimed at detecting possible temporal variations of the ratio between solar flare and solar wind activity. He, Ne, Ar and solar flare tracks are measured on plagioclase separates of 12 surface soils and two Apollo 15 drill core samples, and track density histograms are compared with gas concentration distributions obtained from aliquot samples. Results show that solar wind Ar is probably well retained in all minerals. He, Ne, and Ar are not saturated macroscopically, and semi-microscopic or microscopic saturation is very rare for Ar, even in gas-rich plagioclase populations. All grains contain trapped noble gases, even in relatively gas-poor mineral populations, and for clean minerals in the size range of 150-200 microns, the time between the first and last surface exposure is in the order of 10 to the 7th to 10 to the 8th years

Genetic algorithms optimized fuzzy logic control for the maximum power point tracking in photovoltaic system

Energy Technology Data Exchange (ETDEWEB)

Larbes, C.; Ait Cheikh, S.M.; Obeidi, T.; Zerguerras, A. [Laboratoire des Dispositifs de Communication et de Conversion Photovoltaique, Departement d' Electronique, Ecole Nationale Polytechnique, 10, Avenue Hassen Badi, El Harrach, Alger 16200 (Algeria)

2009-10-15

This paper presents an intelligent control method for the maximum power point tracking (MPPT) of a photovoltaic system under variable temperature and irradiance conditions. First, for the purpose of comparison and because of its proven and good performances, the perturbation and observation (P and O) technique is briefly introduced. A fuzzy logic controller based MPPT (FLC) is then proposed which has shown better performances compared to the P and O MPPT based approach. The proposed FLC has been also improved using genetic algorithms (GA) for optimisation. Different development stages are presented and the optimized fuzzy logic MPPT controller (OFLC) is then simulated and evaluated, which has shown better performances. (author)

78 FR 30340 - Records Schedules; Availability and Request for Comments

Science.gov (United States)

2013-05-22

... track sexual assault cases. 10. Department of Homeland Security, Agency-wide (DAA-0563-2013- 0001, 11 items, 11 temporary items). Records of the department and its component agencies including biometric and limited biographic information used for national security, law enforcement, immigration, and other mission...

78 FR 5792 - Privacy Act of 1974; System of Records

Science.gov (United States)

2013-01-28

..., Marine Corps; BUMED Note 6110, Tracking and Reporting Individual Medical Readiness Data; SECNAVINST 6120... persons that are properly screened, cleared, and trained. Access to this system of records and personal... available only to authorized personnel having a need-to-know.'' * * * * * System manager(s) and address...

A computer program TRACK_P for studying proton tracks in PADC detectors

Directory of Open Access Journals (Sweden)

D. Nikezic

2016-01-01

Full Text Available A computer program for studying proton tracks in solid state nuclear track detectors was developed and described in this paper. The program was written in Fortran 90, with an additional tool for visualizing the track appearance as seen under the optical microscope in the transmission mode, which was written in the Python programming language. Measurable track parameters were determined and displayed in the application window and written in a data file. Three-dimensional representation of tracks was enabled. Examples of calculated tracks were also given in the present paper.

Persistent Aerial Tracking

KAUST Repository

Mueller, Matthias

2016-04-13

In this thesis, we propose a new aerial video dataset and benchmark for low altitude UAV target tracking, as well as, a photo-realistic UAV simulator that can be coupled with tracking methods. Our benchmark provides the rst evaluation of many state of-the-art and popular trackers on 123 new and fully annotated HD video sequences captured from a low-altitude aerial perspective. Among the compared trackers, we determine which ones are the most suitable for UAV tracking both in terms of tracking accuracy and run-time. We also present a simulator that can be used to evaluate tracking algorithms in real-time scenarios before they are deployed on a UAV "in the field", as well as, generate synthetic but photo-realistic tracking datasets with free ground truth annotations to easily extend existing real-world datasets. Both the benchmark and simulator will be made publicly available to the vision community to further research in the area of object tracking from UAVs. Additionally, we propose a persistent, robust and autonomous object tracking system for unmanned aerial vehicles (UAVs) called Persistent Aerial Tracking (PAT). A computer vision and control strategy is applied to a diverse set of moving objects (e.g. humans, animals, cars, boats, etc.) integrating multiple UAVs with a stabilized RGB camera. A novel strategy is employed to successfully track objects over a long period, by \\'handing over the camera\\' from one UAV to another. We integrate the complete system into an off-the-shelf UAV, and obtain promising results showing the robustness of our solution in real-world aerial scenarios.

Provenance based data integrity checking and verification in cloud environments.

Science.gov (United States)

Imran, Muhammad; Hlavacs, Helmut; Haq, Inam Ul; Jan, Bilal; Khan, Fakhri Alam; Ahmad, Awais

2017-01-01

Cloud computing is a recent tendency in IT that moves computing and data away from desktop and hand-held devices into large scale processing hubs and data centers respectively. It has been proposed as an effective solution for data outsourcing and on demand computing to control the rising cost of IT setups and management in enterprises. However, with Cloud platforms user's data is moved into remotely located storages such that users lose control over their data. This unique feature of the Cloud is facing many security and privacy challenges which need to be clearly understood and resolved. One of the important concerns that needs to be addressed is to provide the proof of data integrity, i.e., correctness of the user's data stored in the Cloud storage. The data in Clouds is physically not accessible to the users. Therefore, a mechanism is required where users can check if the integrity of their valuable data is maintained or compromised. For this purpose some methods are proposed like mirroring, checksumming and using third party auditors amongst others. However, these methods use extra storage space by maintaining multiple copies of data or the presence of a third party verifier is required. In this paper, we address the problem of proving data integrity in Cloud computing by proposing a scheme through which users are able to check the integrity of their data stored in Clouds. In addition, users can track the violation of data integrity if occurred. For this purpose, we utilize a relatively new concept in the Cloud computing called "Data Provenance". Our scheme is capable to reduce the need of any third party services, additional hardware support and the replication of data items on client side for integrity checking.

Provenance based data integrity checking and verification in cloud environments.

Directory of Open Access Journals (Sweden)

Muhammad Imran

Full Text Available Cloud computing is a recent tendency in IT that moves computing and data away from desktop and hand-held devices into large scale processing hubs and data centers respectively. It has been proposed as an effective solution for data outsourcing and on demand computing to control the rising cost of IT setups and management in enterprises. However, with Cloud platforms user's data is moved into remotely located storages such that users lose control over their data. This unique feature of the Cloud is facing many security and privacy challenges which need to be clearly understood and resolved. One of the important concerns that needs to be addressed is to provide the proof of data integrity, i.e., correctness of the user's data stored in the Cloud storage. The data in Clouds is physically not accessible to the users. Therefore, a mechanism is required where users can check if the integrity of their valuable data is maintained or compromised. For this purpose some methods are proposed like mirroring, checksumming and using third party auditors amongst others. However, these methods use extra storage space by maintaining multiple copies of data or the presence of a third party verifier is required. In this paper, we address the problem of proving data integrity in Cloud computing by proposing a scheme through which users are able to check the integrity of their data stored in Clouds. In addition, users can track the violation of data integrity if occurred. For this purpose, we utilize a relatively new concept in the Cloud computing called "Data Provenance". Our scheme is capable to reduce the need of any third party services, additional hardware support and the replication of data items on client side for integrity checking.

Feasibility Study On Missile Launch Detection And Trajectory Tracking

Science.gov (United States)

2016-09-01

Feature (SURF) detection, and Kalman filtering are frequently used for object tracking. These methods have been applied frequently on video records...missile by processing the thermal imagery from the thermal-imaging sensor, which captures the temperature gradient of the surroundings within its field of...view. As the missile’s propulsion motor emits gases at high temperature to generate the thrust required for its flight, the heat 2 signature of

Continuous event recorders did not affect anxiety or quality of life in patients with palpitations

NARCIS (Netherlands)

Hoefman, Emmy; Boer, Kimberly R.; van Weert, Henk C. P. M.; Reitsma, Johannes B.; Koster, Rudolf W.; Bindels, Patrick J. P.

2007-01-01

OBJECTIVES: Palpitations can generate feelings of anxiety and decrease quality of life (QoL) due to fear of a cardiac abnormality. Continuous event recorders (CERs) have proven to be successful in diagnosing causes of palpitations but may affect patient QoL and anxiety. The aim is to determine

A laser-based eye-tracking system.

Science.gov (United States)

Irie, Kenji; Wilson, Bruce A; Jones, Richard D; Bones, Philip J; Anderson, Tim J

2002-11-01

This paper reports on the development of a new eye-tracking system for noninvasive recording of eye movements. The eye tracker uses a flying-spot laser to selectively image landmarks on the eye and, subsequently, measure horizontal, vertical, and torsional eye movements. Considerable work was required to overcome the adverse effects of specular reflection of the flying-spot from the surface of the eye onto the sensing elements of the eye tracker. These effects have been largely overcome, and the eye-tracker has been used to document eye movement abnormalities, such as abnormal torsional pulsion of saccades, in the clinical setting.

Cosmic-ray exposure records and origins of meteorites

International Nuclear Information System (INIS)

Reedy, R.C.

1985-01-01

The cosmic-ray records of meteorites are used to infer much about their origins and recent histories. The methods used to interpret meteorites cosmic-ray records, especially identifying simple or complex exposure histories, often are inadequate. Spallogenic radionuclides, stable nuclides, and measurements of products that have location-sensitive production rates, such as the tracks of heavy cosmic-ray nuclei or neutron-capture nuclides, are very useful in accurately determining a meteorite's history. Samples from different, known locations of a meteorite help in studying the cosmic-ray record. Such extensive sets of meteorite measuremetns, plus theoretical modeling of complex histories, improves the ability to predict the production of cosmogenic nuclides in meteorites, to distinguish simple and complex exposure histories, and to better determine exposure ages

An RFID-based luggage and passenger tracking system for airport security control applications

Science.gov (United States)

Vastianos, George E.; Kyriazanos, Dimitris M.; Kountouriotis, Vassilios I.; Thomopoulos, Stelios C. A.

2014-06-01

Market analysis studies of recent years have shown a steady and significant increase in the usage of RFID technology. Key factors for this growth were the decreased costs of passive RFIDs and their improved performance compared to the other identification technologies. Besides the benefits of RFID technologies into the supply chains, warehousing, traditional inventory and asset management applications, RFID has proven itself worth exploiting on experimental, as well as on commercial level in other sectors, such as healthcare, transport and security. In security sector, airport security is one of the biggest challenges. Airports are extremely busy public places and thus prime targets for terrorism, with aircraft, passengers, crew and airport infrastructure all subject to terrorist attacks. Inside this labyrinth of security challenges, the long range detection capability of the UHF passive RFID technology can be turned into a very important tracking tool that may outperform all the limitations of the barcode tracking inside the current airport security control chain. The Integrated Systems Lab of NCSR Demokritos has developed an RFID based Luggage and Passenger tracking system within the TASS (FP7-SEC-2010-241905) EU research project. This paper describes application scenarios of the system categorized according to the structured nature of the environment, the system architecture and presents evaluation results extracted from measurements with a group of different massive production GEN2 UHF RFID tags that are widely available in the world market.

The AtChem On-line model and Electronic Laboratory Notebook (ELN): A free community modelling tool with provenance capture