WorldWideScience

Sample records for proved valuable tools

  1. Molecular data and radiative transfer tools for ALMA

    NARCIS (Netherlands)

    Tak, F F S van der; ; Hogerheijde, M

    2007-01-01

    Abstract: This paper presents an overview of several modeling tools for analyzing molecular line observations at submillimeter wavelengths. These tools are already proving to be very valuable for the interpretation of data from current telescopes, and will be indispensable for data obtained with

  2. Motivational interviewing: a valuable tool for the psychiatric advanced practice nurse.

    Science.gov (United States)

    Karzenowski, Abby; Puskar, Kathy

    2011-01-01

    Motivational Interviewing (MI) is well known and respected by many health care professionals. Developed by Miller and Rollnick (2002) , it is a way to promote behavior change from within and resolve ambivalence. MI is individualized and is most commonly used in the psychiatric setting; it is a valuable tool for the Psychiatric Advanced Nurse Practice Nurse. There are many resources that talk about what MI is and the principles used to apply it. However, there is little information about how to incorporate MI into a clinical case. This article provides a summary of articles related to MI and discusses two case studies using MI and why advanced practice nurses should use MI with their patients.

  3. Hypnosis as a Valuable Tool for Surgical Procedures in the Oral and Maxillofacial Area.

    Science.gov (United States)

    Montenegro, Gil; Alves, Luiza; Zaninotto, Ana Luiza; Falcão, Denise Pinheiro; de Amorim, Rivadávio Fernandes Batista

    2017-04-01

    Hypnosis is a valuable tool in the management of patients who undergo surgical procedures in the maxillofacial complex, particularly in reducing and eliminating pain during surgery and aiding patients who have dental fear and are allergic to anesthesia. This case report demonstrates the efficacy of hypnosis in mitigating anxiety, bleeding, and pain during dental surgery without anesthesia during implant placement of tooth 14, the upper left first molar.

  4. The program success story: a valuable tool for program evaluation.

    Science.gov (United States)

    Lavinghouze, Rene; Price, Ann Webb; Smith, Kisha-Ann

    2007-10-01

    Success stories are evaluation tools that have been used by professionals across disciplines for quite some time. They are also proving to be useful in promoting health programs and their accomplishments. The increasing popularity of success stories is due to the innovative and effective way that they increase a program's visibility, while engaging potential participants, partners, and funders in public health efforts. From the community level to the federal level, program administrators are using success stories as vehicles for celebrating achievements, sharing challenges, and communicating lessons learned. Success stories are an effective means to move beyond the numbers and connect to readers-with a cause they can relate to and want to join. This article defines success stories and provides an overview of several types of story formats, how success stories can be systematically collected, and how they are used to communicate program success.

  5. Pengembangan Perangkat Pembelajaran Geometri Ruang dengan Model Proving Theorem

    Directory of Open Access Journals (Sweden)

    Bambang Eko Susilo

    2016-03-01

    Full Text Available Kemampuan berpikir kritis dan kreatif mahasiswa masih lemah. Hal ini ditemukan pada mahasiswa yang mengambil mata kuliah Geometri Ruang yaitu dalam membuktikan soal-soal pembuktian (problem to proof. Mahasiswa masih menyelesaikan secara algoritmik atau prosedural sehingga diperlukan pengembangan perangkat pembelajaran Geometri Ruang berbasis kompetensi dan konservasi dengan model Proving Theorem. Dalam penelitian ini perangkat perkuliahan yang dikembangkan yaitu Silabus, Satuan Acara Perkuliahan (SAP, Kontrak Perkuliahan, Media Pembelajaran, Bahan Ajar, Tes UTS dan UAS serta Angket Karakter Konservasi telah dilaksanakan dengan baik dengan kriteria (1 validasi perangkat pembelajaran mata kuliah Geometri ruang berbasis kompetensi dan konservasi dengan model proving theorem berkategori baik dan layak digunakan dan (2 keterlaksanaan RPP pada pembelajaran yang dikembangkan secara keseluruhan berkategori baik.Critical and creative thinking abilities of students still weak. It is found in students who take Space Geometry subjects that is in solving problems to to prove. Students still finish in algorithmic or procedural so that the required the development of Space Geometry learning tools based on competency and conservation with Proving Theorem models. This is a research development which refers to the 4-D models that have been modified for the Space Geometry learning tools, second semester academic year 2014/2015. Instruments used include validation sheet, learning tools and character assessment questionnaire. In this research, the learning tools are developed, namely Syllabus, Lesson Plan, Lecture Contract, Learning Media, Teaching Material, Tests, and Character Conservation Questionnaire had been properly implemented with the criteria (1 validation of Space Geometry learning tools based on competency and conservation with Proving Theorem models categorized good and feasible to use, and (2 the implementation of Lesson Plan on learning categorized

  6. 3D-Printed specimens as a valuable tool in anatomy education: A pilot study.

    Science.gov (United States)

    Garas, Monique; Vaccarezza, Mauro; Newland, George; McVay-Doornbusch, Kylie; Hasani, Jamila

    2018-06-06

    Three-dimensional (3D) printing is a modern technique of creating 3D-printed models that allows reproduction of human structures from MRI and CT scans via fusion of multiple layers of resin materials. To assess feasibility of this innovative resource as anatomy educational tool, we conducted a preliminary study on Curtin University undergraduate students to investigate the use of 3D models for anatomy learning as a main goal, to assess the effectiveness of different specimen types during the sessions and personally preferred anatomy learning tools among students as secondary aim. The study consisted of a pre-test, exposure to test (anatomical test) and post-test survey. During pre-test, all participants (both without prior experience and experienced groups) were given a brief introduction on laboratory safety and study procedure thus participants were exposed to 3D, wet and plastinated specimens of the heart, shoulder and thigh to identify the pinned structures (anatomical test). Then, participants were provided a post-test survey containing five questions. In total, 23 participants completed the anatomical test and post-test survey. A larger number of participants (85%) achieved right answers for 3D models compared to wet and plastinated materials, 74% of population selected 3D models as the most usable tool for identification of pinned structures and 45% chose 3D models as their preferred method of anatomy learning. This preliminary small-size study affirms the feasibility of 3D-printed models as a valuable asset in anatomy learning and shows their capability to be used adjacent to cadaveric materials and other widely used tools in anatomy education. Copyright © 2018 Elsevier GmbH. All rights reserved.

  7. Professional regulation: a potentially valuable tool in responding to "stem cell tourism".

    Science.gov (United States)

    Zarzeczny, Amy; Caulfield, Timothy; Ogbogu, Ubaka; Bell, Peter; Crooks, Valorie A; Kamenova, Kalina; Master, Zubin; Rachul, Christen; Snyder, Jeremy; Toews, Maeghan; Zoeller, Sonja

    2014-09-09

    The growing international market for unproven stem cell-based interventions advertised on a direct-to-consumer basis over the internet ("stem cell tourism") is a source of concern because of the risks it presents to patients as well as their supporters, domestic health care systems, and the stem cell research field. Emerging responses such as public and health provider-focused education and national regulatory efforts are encouraging, but the market continues to grow. Physicians play a number of roles in the stem cell tourism market and, in many jurisdictions, are members of a regulated profession. In this article, we consider the use of professional regulation to address physician involvement in stem cell tourism. Although it is not without its limitations, professional regulation is a potentially valuable tool that can be employed in response to problematic types of physician involvement in the stem cell tourism market. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

  8. Professional Regulation: A Potentially Valuable Tool in Responding to “Stem Cell Tourism”

    Directory of Open Access Journals (Sweden)

    Amy Zarzeczny

    2014-09-01

    Full Text Available The growing international market for unproven stem cell-based interventions advertised on a direct-to-consumer basis over the internet (“stem cell tourism” is a source of concern because of the risks it presents to patients as well as their supporters, domestic health care systems, and the stem cell research field. Emerging responses such as public and health provider-focused education and national regulatory efforts are encouraging, but the market continues to grow. Physicians play a number of roles in the stem cell tourism market and, in many jurisdictions, are members of a regulated profession. In this article, we consider the use of professional regulation to address physician involvement in stem cell tourism. Although it is not without its limitations, professional regulation is a potentially valuable tool that can be employed in response to problematic types of physician involvement in the stem cell tourism market.

  9. The Tracking Meteogram, an AWIPS II Tool for Time-Series Analysis

    Science.gov (United States)

    Burks, Jason Eric; Sperow, Ken

    2015-01-01

    A new tool has been developed for the National Weather Service (NWS) Advanced Weather Interactive Processing System (AWIPS) II through collaboration between NASA's Short-term Prediction Research and Transition (SPoRT) and the NWS Meteorological Development Laboratory (MDL). Referred to as the "Tracking Meteogram", the tool aids NWS forecasters in assessing meteorological parameters associated with moving phenomena. The tool aids forecasters in severe weather situations by providing valuable satellite and radar derived trends such as cloud top cooling rates, radial velocity couplets, reflectivity, and information from ground-based lightning networks. The Tracking Meteogram tool also aids in synoptic and mesoscale analysis by tracking parameters such as the deepening of surface low pressure systems, changes in surface or upper air temperature, and other properties. The tool provides a valuable new functionality and demonstrates the flexibility and extensibility of the NWS AWIPS II architecture. In 2014, the operational impact of the tool was formally evaluated through participation in the NOAA/NWS Operations Proving Ground (OPG), a risk reduction activity to assess performance and operational impact of new forecasting concepts, tools, and applications. Performance of the Tracking Meteogram Tool during the OPG assessment confirmed that it will be a valuable asset to the operational forecasters. This presentation reviews development of the Tracking Meteogram tool, performance and feedback acquired during the OPG activity, and future goals for continued support and extension to other application areas.

  10. Automated theorem proving theory and practice

    CERN Document Server

    Newborn, Monty

    2001-01-01

    As the 21st century begins, the power of our magical new tool and partner, the computer, is increasing at an astonishing rate. Computers that perform billions of operations per second are now commonplace. Multiprocessors with thousands of little computers - relatively little! -can now carry out parallel computations and solve problems in seconds that only a few years ago took days or months. Chess-playing programs are on an even footing with the world's best players. IBM's Deep Blue defeated world champion Garry Kasparov in a match several years ago. Increasingly computers are expected to be more intelligent, to reason, to be able to draw conclusions from given facts, or abstractly, to prove theorems-the subject of this book. Specifically, this book is about two theorem-proving programs, THEO and HERBY. The first four chapters contain introductory material about automated theorem proving and the two programs. This includes material on the language used to express theorems, predicate calculus, and the rules of...

  11. MALDI TOF imaging mass spectrometry in clinical pathology: a valuable tool for cancer diagnostics (review).

    Science.gov (United States)

    Kriegsmann, Jörg; Kriegsmann, Mark; Casadonte, Rita

    2015-03-01

    Matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) imaging mass spectrometry (IMS) is an evolving technique in cancer diagnostics and combines the advantages of mass spectrometry (proteomics), detection of numerous molecules, and spatial resolution in histological tissue sections and cytological preparations. This method allows the detection of proteins, peptides, lipids, carbohydrates or glycoconjugates and small molecules.Formalin-fixed paraffin-embedded tissue can also be investigated by IMS, thus, this method seems to be an ideal tool for cancer diagnostics and biomarker discovery. It may add information to the identification of tumor margins and tumor heterogeneity. The technique allows tumor typing, especially identification of the tumor of origin in metastatic tissue, as well as grading and may provide prognostic information. IMS is a valuable method for the identification of biomarkers and can complement histology, immunohistology and molecular pathology in various fields of histopathological diagnostics, especially with regard to identification and grading of tumors.

  12. Models and Techniques for Proving Data Structure Lower Bounds

    DEFF Research Database (Denmark)

    Larsen, Kasper Green

    In this dissertation, we present a number of new techniques and tools for proving lower bounds on the operational time of data structures. These techniques provide new lines of attack for proving lower bounds in both the cell probe model, the group model, the pointer machine model and the I...... bound of tutq = (lgd􀀀1 n). For ball range searching, we get a lower bound of tutq = (n1􀀀1=d). The highest previous lower bound proved in the group model does not exceed ((lg n= lg lg n)2) on the maximum of tu and tq. Finally, we present a new technique for proving lower bounds....../O-model. In all cases, we push the frontiers further by proving lower bounds higher than what could possibly be proved using previously known techniques. For the cell probe model, our results have the following consequences: The rst (lg n) query time lower bound for linear space static data structures...

  13. Agrobacterium rhizogenes-mediated transformation of Superroot-derived Lotus corniculatus plants: a valuable tool for functional genomics

    Directory of Open Access Journals (Sweden)

    Liu Wei

    2009-06-01

    reach 92% based on GUS detection. The combination of the highly efficient transformation and the regeneration system of Superroot provides a valuable tool for functional genomics studies in L. corniculatus.

  14. The AACSB: A Valuable Tool for the Language Educator.

    Science.gov (United States)

    Bush-Bacelis, Jean L.

    The American Assembly of Collegiate Schools of Business (AACSB), an accrediting agency, may be an overlooked tool for establishing rationale and credibility for globalization of business courses. The 245 member institutions are bound by the agency's accrediting requirements, and many others are influenced by the standards set in those…

  15. Teaching resources in speleology and karst: a valuable educational tool

    Directory of Open Access Journals (Sweden)

    De Waele Jo

    2010-01-01

    Full Text Available There is a growing need in the speleological community of tools that make teaching of speleology and karst much easier. Despite the existence of a wide range of major academic textbooks, often the caver community has a difficult access to such material. Therefore, to fill this gap, the Italian Speleological Society, under the umbrella of the Union International de Spéléologie, has prepared a set of lectures, in a presentation format, on several topics including geology, physics, chemistry, hydrogeology, mineralogy, palaeontology, biology, microbiology, history, archaeology, artificial caves, documentation, etc. These lectures constitute the “Teaching Resources in Speleology and Karst”, available online. This educational tool, thanks to its easily manageable format, can constantly be updated and enriched with new contents and topics.

  16. Theorem Proving in Intel Hardware Design

    Science.gov (United States)

    O'Leary, John

    2009-01-01

    For the past decade, a framework combining model checking (symbolic trajectory evaluation) and higher-order logic theorem proving has been in production use at Intel. Our tools and methodology have been used to formally verify execution cluster functionality (including floating-point operations) for a number of Intel products, including the Pentium(Registered TradeMark)4 and Core(TradeMark)i7 processors. Hardware verification in 2009 is much more challenging than it was in 1999 - today s CPU chip designs contain many processor cores and significant firmware content. This talk will attempt to distill the lessons learned over the past ten years, discuss how they apply to today s problems, outline some future directions.

  17. Value Innovation in Learner-Centered Design. How to Develop Valuable Learning Tools

    Science.gov (United States)

    Breuer, Henning; Schwarz, Heinrich; Feller, Kristina; Matsumoto, Mitsuji

    2014-01-01

    This paper shows how to address technological, cultural and social transformations with empirically grounded innovation. Areas in transition such as higher education and learning techniques today bring about new needs and opportunities for innovative tools and services. But how do we find these tools? The paper argues for using a strategy of…

  18. Formalizing and proving a typing result for security protocols in Isabelle/HOL

    DEFF Research Database (Denmark)

    Hess, Andreas Viktor; Modersheim, Sebastian

    2017-01-01

    or the positive output of a verification tool. However several of these works have used a typed model, where the intruder is restricted to "well-typed" attacks. There also have been several works that show that this is actually not a restriction for a large class of protocols, but all these results so far...... are again pen-and-paper proofs. In this work we present a formalization of such a typing result in Isabelle/HOL. We formalize a constraint-based approach that is used in the proof argument of such typing results, and prove its soundness, completeness and termination. We then formalize and prove the typing...... result itself in Isabelle. Finally, to illustrate the real-world feasibility, we prove that the standard Transport Layer Security (TLS) handshake satisfies the main condition of the typing result....

  19. Value Innovation in Learner-Centered Design. How to Develop Valuable Learning Tools.

    Directory of Open Access Journals (Sweden)

    Henning Breuer

    2014-02-01

    Full Text Available This paper shows how to address technological, cultural and social transformations with empirically grounded innovation. Areas in transition such as higher education and learning techniques today bring about new needs and opportunities for innovative tools and services. But how do we find these tools? The paper argues for using a strategy of (user value innovation that creatively combines ethnographic methods with strategic industry analysis. By focusing on unmet and emerging needs ethnographic research identifies learner values, needs and challenges but does not determine solutions. Blue-ocean strategy tools can identify new opportunities that alter existing offerings but give weak guidance on what will be most relevant to users. The triangulation of both is illustrated through an innovation project in higher education.

  20. Introduction, comparison, and validation of Meta‐Essentials: A free and simple tool for meta‐analysis

    Science.gov (United States)

    van Rhee, Henk; Hak, Tony

    2017-01-01

    We present a new tool for meta‐analysis, Meta‐Essentials, which is free of charge and easy to use. In this paper, we introduce the tool and compare its features to other tools for meta‐analysis. We also provide detailed information on the validation of the tool. Although free of charge and simple, Meta‐Essentials automatically calculates effect sizes from a wide range of statistics and can be used for a wide range of meta‐analysis applications, including subgroup analysis, moderator analysis, and publication bias analyses. The confidence interval of the overall effect is automatically based on the Knapp‐Hartung adjustment of the DerSimonian‐Laird estimator. However, more advanced meta‐analysis methods such as meta‐analytical structural equation modelling and meta‐regression with multiple covariates are not available. In summary, Meta‐Essentials may prove a valuable resource for meta‐analysts, including researchers, teachers, and students. PMID:28801932

  1. Social Networking Tools for Informal Scholarly Communication Prove Popular for Academics at Two Universities

    Directory of Open Access Journals (Sweden)

    Aoife Lawton

    2016-04-01

    Full Text Available Objective – To investigate the adoption, use, perceived impact of, and barriers to using social networking tools for scholarly communication at two universities. Design – Cross-institutional quantitative study using an online survey. Setting – Academics working in the disciplines of the humanities and social sciences at two universities: one in Europe and one in the Middle East. Methods – An online survey was devised based on a previous survey (Al-Aufi, 2007 and informed by relevant research. The survey was piloted by 10 academics at the 2 participating universities. Post pilot it was revised and then circulated to all academics from similar faculties at two universities. Three follow up emails were sent to both sets of academics. The data was analyzed using Statistical Package for the Social Sciences (SPSS software. Descriptive and inferential statistics were analyzed using ANOVA tests. Main Results – The survey achieved a 34% response rate (n=130. The majority of participants were from the university based in the Middle East and were male (70.8%. Most of the responses were from academics under 40 years of age. The use of notebooks was prevalent at both universities. “Notebooks” is used as a term to describe laptops, netbooks, or ultra-book computers. The majority reported use of social networking tools for informal scholarly communication (70.1%, valuing this type of use. 29.9% of respondents reported they do not use social networking tools for this purpose. Barriers were identified as lack of incentive, digital literacy, training, and concerns over Internet security. Among the non-users, barriers included low interest in their use and a perceived lack of relevancy of such tools for scholarly communication. The types of tools used the most were those with social connection functions, such as Facebook and Twitter. The tools used the least were social bookmarking tools. A one-way analysis of variance (ANOVA test indicated that

  2. The effects of GeoGebra software on pre-service mathematics teachers' attitudes and views toward proof and proving

    Science.gov (United States)

    Zengin, Yılmaz

    2017-11-01

    The purpose of this study is to determine the effect of GeoGebra software on pre-service mathematics teachers' attitudes towards proof and proving and to determine pre-service teachers' pre- and post-views regarding proof. The study lasted nine weeks and the participants of the study consisted of 24 pre-service mathematics teachers. The study used the 'Attitude Scale Towards Proof and Proving' and an open-ended questionnaire that were administered before and after the intervention as data collection tools. Paired samples t-test analysis was used for the analysis of quantitative data and content and descriptive analyses were utilized for the analysis of qualitative data. As a result of the data analysis, it was determined that GeoGebra software was an effective tool in increasing pre-service teachers' attitudes towards proof and proving.

  3. Determination of commercially valuable characteristics of plant varieties for energetic use during the state examination

    Directory of Open Access Journals (Sweden)

    В. В. Баликіна

    2014-12-01

    Full Text Available The analysis of commercially valuable indices of plant varieties for energetic use was carried out and the necessity to determine energetic indices during the state scientific-and-technical examination is substantiated. In order to explain the requirements for registration of new varieties of energy crops concerning the defi nition of indices of ability for distribution, the collection of species and hybrid forms of willow was used. Factors that prove the economic and environmental advantages of energy willow cultivation for biofuel are specifi ed.

  4. Introduction, comparison, and validation of Meta-Essentials: A free and simple tool for meta-analysis.

    Science.gov (United States)

    Suurmond, Robert; van Rhee, Henk; Hak, Tony

    2017-12-01

    We present a new tool for meta-analysis, Meta-Essentials, which is free of charge and easy to use. In this paper, we introduce the tool and compare its features to other tools for meta-analysis. We also provide detailed information on the validation of the tool. Although free of charge and simple, Meta-Essentials automatically calculates effect sizes from a wide range of statistics and can be used for a wide range of meta-analysis applications, including subgroup analysis, moderator analysis, and publication bias analyses. The confidence interval of the overall effect is automatically based on the Knapp-Hartung adjustment of the DerSimonian-Laird estimator. However, more advanced meta-analysis methods such as meta-analytical structural equation modelling and meta-regression with multiple covariates are not available. In summary, Meta-Essentials may prove a valuable resource for meta-analysts, including researchers, teachers, and students. © 2017 The Authors. Research Synthesis Methods published by John Wiley & Sons Ltd.

  5. Challenging and valuable

    NARCIS (Netherlands)

    Van Hal, J.D.M.

    2008-01-01

    Challenging and valuable Inaugural speech given on May 7th 2008 at the occasion of the acceptance of the position of Professor Sustainable Housing Transformation at the faculty of Architeeture of the Delft University of Technology by Prof. J.D.M. van Hal MSc PhD.

  6. Recovery and utilization of valuable metals from spent nuclear fuel. 3: Mutual separation of valuable metals

    International Nuclear Information System (INIS)

    Kirishima, K.; Shibayama, H.; Nakahira, H.; Shimauchi, H.; Myochin, M.; Wada, Y.; Kawase, K.; Kishimoto, Y.

    1993-01-01

    In the project ''Recovery and Utilization of Valuable Metals from Spent Fuel,'' mutual separation process of valuable metals recovered from spent fuel has been studied by using the simulated solution contained Pb, Ru, Rh, Pd and Mo. Pd was separated successfully by DHS (di-hexyl sulfide) solvent extraction method, while Pb was recovered selectively from the raffinate by neutralization precipitation of other elements. On the other hand, Rh was roughly separated by washing the precipitate with alkaline solution, so that Rh was refined by chelate resin CS-346. Outline of the mutual separation process flow sheet has been established of the combination of these techniques. The experimental results and the process flow sheet of mutual separation of valuable metals are presented in this paper

  7. Preparing for Mars: The Evolvable Mars Campaign 'Proving Ground' Approach

    Science.gov (United States)

    Bobskill, Marianne R.; Lupisella, Mark L.; Mueller, Rob P.; Sibille, Laurent; Vangen, Scott; Williams-Byrd, Julie

    2015-01-01

    As the National Aeronautics and Space Administration (NASA) prepares to extend human presence beyond Low Earth Orbit, we are in the early stages of planning missions within the framework of an Evolvable Mars Campaign. Initial missions would be conducted in near-Earth cis-lunar space and would eventually culminate in extended duration crewed missions on the surface of Mars. To enable such exploration missions, critical technologies and capabilities must be identified, developed, and tested. NASA has followed a principled approach to identify critical capabilities and a "Proving Ground" approach is emerging to address testing needs. The Proving Ground is a period subsequent to current International Space Station activities wherein exploration-enabling capabilities and technologies are developed and the foundation is laid for sustained human presence in space. The Proving Ground domain essentially includes missions beyond Low Earth Orbit that will provide increasing mission capability while reducing technical risks. Proving Ground missions also provide valuable experience with deep space operations and support the transition from "Earth-dependence" to "Earth-independence" required for sustainable space exploration. A Technology Development Assessment Team identified a suite of critical technologies needed to support the cadence of exploration missions. Discussions among mission planners, vehicle developers, subject-matter-experts, and technologists were used to identify a minimum but sufficient set of required technologies and capabilities. Within System Maturation Teams, known challenges were identified and expressed as specific performance gaps in critical capabilities, which were then refined and activities required to close these critical gaps were identified. Analysis was performed to identify test and demonstration opportunities for critical technical capabilities across the Proving Ground spectrum of missions. This suite of critical capabilities is expected to

  8. Symbolic logic and mechanical theorem proving

    CERN Document Server

    Chang, Chin-Liang

    1969-01-01

    This book contains an introduction to symbolic logic and a thorough discussion of mechanical theorem proving and its applications. The book consists of three major parts. Chapters 2 and 3 constitute an introduction to symbolic logic. Chapters 4-9 introduce several techniques in mechanical theorem proving, and Chapters 10 an 11 show how theorem proving can be applied to various areas such as question answering, problem solving, program analysis, and program synthesis.

  9. Umbilical artery doppler velocimetry: a valuable tool for antenatal fetal surveillance

    International Nuclear Information System (INIS)

    Khawar, N.; Umber, A.

    2013-01-01

    To determine umbilical artery Doppler velocity parameter systolic: diastolic ratio (S/D ratio) relation with fetal well being and outcome. Setting: Department of Obstetrics and Gynecology, Lady Willingdon Hospital, Lahore Duration of study: Six months from 27-02-2008 to 26-08-2008. Subjects and methods: Sixty patients fulfilling the inclusion criteria were included in this study. They were subdivided into two groups. Group 'A' included 30 normal pregnant women with no medical or obstetrical risk factors and group 'B' included 30 pregnant women having risk factors like, hypertension, diabetes, Rhesus incompatibility, discordant twins, intrauterine growth restriction and non immunehydropsfetalis. Results: In comparison of S/D ratio with risk factors it was observed that S/D ratio 3 was present in 19 patients (31.6%) in pregnancy with hypertension/preeclampsia, 3 patients (5%) with diabetes mellitus, 11 patients (18.3%) with intrauterine growth restriction, 15 patients (25.0%) with oligohydramnios and only 1 patient (1.6%) with twin pregnancy. It was observed that women with S/D ratio 3 S/D ratio delivered 10 neonates (16.6%) with <4 Apgar score at 1 minute, 23 (38.3%) with <6 score at 5 minutes and 23 neonates (38.3%) needed resuscitation, 21 (35.0%) were admitted to neonatal unit for asphyxia. Conclusion: Umbilical artery Doppler studies is an integral tool while evaluating health of high risk pregnancies. However, it is not appropriate as a screening tool for low risk pregnancies. (author)

  10. English Digital Dictionaries as Valuable Blended Learning Tools for Palestinian College Students

    Science.gov (United States)

    Dwaik, Raghad A. A.

    2015-01-01

    Digital technology has become an indispensable aspect of foreign language learning around the globe especially in the case of college students who are often required to finish extensive reading assignments within a limited time period. Such pressure calls for the use of efficient tools such as digital dictionaries to help them achieve their…

  11. Permanent foresty plots: a potentially valuable teaching resource in undergraduate biology porgrams for the Caribbean

    Science.gov (United States)

    H. Valles; C.M.S. Carrington

    2016-01-01

    There has been a recent proposal to change the way that biology is taught and learned in undergraduate biology programs in the USA so that students develop a better understanding of science and the natural world. Here, we use this new, recommended teaching– learning framework to assert that permanent forestry plots could be a valuable tool to help develop biology...

  12. Are consumer surveys valuable as a service improvement tool in health services? A critical appraisal.

    Science.gov (United States)

    Patwardhan, Anjali; Patwardhan, Prakash

    2009-01-01

    In the recent climate of consumerism and consumer focused care, health and social care needs to be more responsive than ever before. Consumer needs and preferences can be elicited with accepted validity and reliability only by strict methodological control, customerisation of the questionnaire and skilled interpretation. To construct, conduct, interpret and implement improved service provision, requires a trained work force and infrastructure. This article aims to appraise various aspects of consumer surveys and to assess their value as effective service improvement tools. The customer is the sole reason organisations exist. Consumer surveys are used worldwide as service and quality of care improvement tools by all types of service providers including health service providers. The article critically appraises the value of consumer surveys as service improvement tools in health services tool and its future applications. No one type of survey is the best or ideal. The key is the selection of the correct survey methodology, unique and customised for the particular type/aspect of care being evaluated. The method used should reflect the importance of the information required. Methodological rigor is essential for the effectiveness of consumer surveys as service improvement tools. Unfortunately so far there is no universal consensus on superiority of one particular methodology over another or any benefit of one specific methodology in a given situation. More training and some dedicated resource allocation is required to develop consumer surveys. More research is needed to develop specific survey methodology and evaluation techniques for improved validity and reliability of the surveys as service improvement tools. Measurement of consumer preferences/priorities, evaluation of services and key performance scores, is not easy. Consumer surveys seem impressive tools as they provide the customer a voice for change or modification. However, from a scientific point

  13. Proving productivity in infinite data structures

    NARCIS (Netherlands)

    Zantema, H.; Raffelsieper, M.; Lynch, C.

    2010-01-01

    For a general class of infinite data structures including streams, binary trees, and the combination of finite and infinite lists, we investigate the notion of productivity. This generalizes stream productivity. We develop a general technique to prove productivity based on proving context-sensitive

  14. Proving relations between modular graph functions

    International Nuclear Information System (INIS)

    Basu, Anirban

    2016-01-01

    We consider modular graph functions that arise in the low energy expansion of the four graviton amplitude in type II string theory. The vertices of these graphs are the positions of insertions of vertex operators on the toroidal worldsheet, while the links are the scalar Green functions connecting the vertices. Graphs with four and five links satisfy several non-trivial relations, which have been proved recently. We prove these relations by using elementary properties of Green functions and the details of the graphs. We also prove a relation between modular graph functions with six links. (paper)

  15. Rice husk ash – A valuable reinforcement for high density polyethylene

    International Nuclear Information System (INIS)

    Ayswarya, E.P.; Vidya Francis, K.F.; Renju, V.S.; Thachil, Eby Thomas

    2012-01-01

    Highlights: ► RHA is formed from the incineration of rice husk. ► RHA is mainly a mixture of silica with various metallic compounds. ► RHA is a valuable reinforcing material for HDPE. ► RHA can be incorporated into HDPE by the melt blending process. ► The best mechanical properties are observed at 1.5% RHA and 15% compatibilizer. -- Abstract: This paper presents the results of a study on the use of rice husk ash (RHA) for property modification of high density polyethylene (HDPE). Rice husk is a waste product of the rice processing industry. It is used widely as a fuel which results in large quantities of RHA. Here, the characterization of RHA has been done with the help of X-ray diffraction (XRD), Inductively Coupled Plasma Atomic Emission Spectroscopy (ICPAES), light scattering based particle size analysis, Fourier transform infrared spectroscopy (FTIR) and Scanning Electron Microscope (SEM). Most reports suggest that RHA when blended directly with polymers without polar groups does not improve the properties of the polymer substantially. In this study RHA is blended with HDPE in the presence of a compatibilizer. The compatibilized HDPE-RHA blend has a tensile strength about 18% higher than that of virgin HDPE. The elongation-at-break is also higher for the compatibilized blend. TGA studies reveal that uncompatibilized as well as compatibilized HDPE-RHA composites have excellent thermal stability. The results prove that RHA is a valuable reinforcing material for HDPE and the environmental pollution arising from RHA can be eliminated in a profitable way by this technique.

  16. Vulnerability of particularly valuable areas. Summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    This report is part of the scientific basis for the management plan for the North Sea and Skagerrak. The report focuses on the vulnerability of particularly valuable areas to petroleum activities, maritime transport, fisheries, land-based and coastal activities and long-range transboundary pollution. A working group with representatives from many different government agencies, headed by the Institute of Marine Research and the Directorate for Nature Management, has been responsible for drawing up the present report on behalf of the Expert Group for the North Sea and Skagerrak. The present report considers the 12 areas that were identified as particularly valuable during an earlier stage of the management plan process on the environment, natural resources and pollution. There are nine areas along the coast and three open sea areas in the North Sea that were identified according to the same predefined criteria as used for the management plans for the Barents Sea: Lofoten area and the Norwegian Sea. The most important criteria for particularly valuable areas are importance for biological production and importance for biodiversity.(Author)

  17. Vulnerability of particularly valuable areas. Summary

    International Nuclear Information System (INIS)

    2012-01-01

    This report is part of the scientific basis for the management plan for the North Sea and Skagerrak. The report focuses on the vulnerability of particularly valuable areas to petroleum activities, maritime transport, fisheries, land-based and coastal activities and long-range transboundary pollution. A working group with representatives from many different government agencies, headed by the Institute of Marine Research and the Directorate for Nature Management, has been responsible for drawing up the present report on behalf of the Expert Group for the North Sea and Skagerrak. The present report considers the 12 areas that were identified as particularly valuable during an earlier stage of the management plan process on the environment, natural resources and pollution. There are nine areas along the coast and three open sea areas in the North Sea that were identified according to the same predefined criteria as used for the management plans for the Barents Sea: Lofoten area and the Norwegian Sea. The most important criteria for particularly valuable areas are importance for biological production and importance for biodiversity.(Author)

  18. The GOES-R Proving Ground: 2012 Update

    Science.gov (United States)

    Gurka, J.; Goodman, S. J.; Schmit, T.; Demaria, M.; Mostek, A.; Siewert, C.; Reed, B.

    2011-12-01

    The Geostationary Operational Environmental Satellite (GOES)-R will provide a great leap forward in observing capabilities, but will also offer a significant challenge to ensure that users are ready to exploit the vast improvements in spatial, spectral, and temporal resolutions. To ensure user readiness, forecasters and other users must have access to prototype advanced products well before launch, and have the opportunity to provide feedback to product developers and computing and communications managers. The operational assessment is critical to ensure that the end products and NOAA's computing and communications systems truly meet their needs in a rapidly evolving environment. The GOES-R Proving Ground (PG) engages the National Weather Service (NWS) forecast, watch and warning community and other agency users in pre-operational demonstrations of select products with GOES-R attributes (enhanced spectral, spatial, and temporal resolution). In the PG, developers and forecasters test and apply algorithms for new GOES-R satellite data and products using proxy and simulated data sets, including observations from current and future satellite instruments (MODIS, AIRS, IASI, SEVIRI, NAST-I, NPP/VIIRS/CrIS, LIS), lightning networks, and computer simulated products. The complete list of products to be evaluated in 2012 will be determined after evaluating results from experiments in 2011 at the NWS' Storm Prediction Center, National Hurricane Center, Aviation Weather Center, Ocean Prediction Center, Hydrometeorological Prediction Center, and from the six NWS regions. In 2012 and beyond, the PG will test and validate data processing and distribution systems and the applications of these products in operational settings. Additionally developers and forecasters will test and apply display techniques and decision aid tools in operational environments. The PG is both a recipient and a source of training. Training materials are developed using various distance training tools in

  19. Combined measurement of plasma cystatin C and low-density lipoprotein cholesterol: A valuable tool for evaluating progressive supranuclear palsy.

    Science.gov (United States)

    Weng, Ruihui; Wei, Xiaobo; Yu, Bin; Zhu, Shuzhen; Yang, Xiaohua; Xie, Fen; Zhang, Mahui; Jiang, Ying; Feng, Zhong-Ping; Sun, Hong-Shuo; Xia, Ying; Jin, Kunlin; Chan, Piu; Wang, Qing; Gao, Xiaoya

    2018-07-01

    Progressive supranuclear palsy (PSP) was previously thought as a cause of atypical Parkinsonism. Although Cystatin C (Cys C) and low-density cholesterol lipoprotein-C (LDL-C) are known to play critical roles in Parkinsonism, it is unknown whether they can be used as markers to distinguish PSP patients from healthy subjects and to determine disease severity. We conducted a cross-sectional study to determine plasma Cys C/HDL/LDL-C levels of 40 patients with PSP and 40 healthy age-matched controls. An extended battery of motor and neuropsychological tests, including the PSP-Rating Scale (PSPRS), the Non-Motor Symptoms Scale (NMSS), Geriatric Depression Scale (GDS) and Mini-Mental State Examination (MMSE), was used to evaluate the disease severity. Receiver operating characteristic (ROC) curves were adopted to assess the prognostic accuracy of Cys C/LDL-C levels in distinguishing PSP from healthy subjects. Patients with PSP exhibited significantly higher plasma levels of Cys C and lower LDL-C. The levels of plasma Cys C were positively and inversely correlated with the PSPRS/NMSS and MMSE scores, respectively. The LDL-C/HDL-C ratio was positively associated with PSPRS/NMSS and GDS scores. The ROC curve for the combination of Cys C and LDL-C yielded a better accuracy for distinguishing PSP from healthy subjects than the separate curves for each parameter. Plasma Cys C and LDL-C may be valuable screening tools for differentiating PSP from healthy subjects; while they could be useful for the PSP intensifies and severity evaluation. A better understanding of Cys C and LDL-C may yield insights into the pathogenesis of PSP. Copyright © 2018 Elsevier Ltd. All rights reserved.

  20. Recovering valuable shale oils, etc

    Energy Technology Data Exchange (ETDEWEB)

    Engler, C

    1922-09-26

    A process is described for the recovery of valuable shale oils or tars, characterized in that the oil shale is heated to about 300/sup 0/C or a temperature not exceeding this essentially and then is treated with a solvent with utilization of this heat.

  1. Theorem Proving In Higher Order Logics

    Science.gov (United States)

    Carreno, Victor A. (Editor); Munoz, Cesar A.; Tahar, Sofiene

    2002-01-01

    The TPHOLs International Conference serves as a venue for the presentation of work in theorem proving in higher-order logics and related areas in deduction, formal specification, software and hardware verification, and other applications. Fourteen papers were submitted to Track B (Work in Progress), which are included in this volume. Authors of Track B papers gave short introductory talks that were followed by an open poster session. The FCM 2002 Workshop aimed to bring together researchers working on the formalisation of continuous mathematics in theorem proving systems with those needing such libraries for their applications. Many of the major higher order theorem proving systems now have a formalisation of the real numbers and various levels of real analysis support. This work is of interest in a number of application areas, such as formal methods development for hardware and software application and computer supported mathematics. The FCM 2002 consisted of three papers, presented by their authors at the workshop venue, and one invited talk.

  2. PRIDE and "Database on Demand" as valuable tools for computational proteomics.

    Science.gov (United States)

    Vizcaíno, Juan Antonio; Reisinger, Florian; Côté, Richard; Martens, Lennart

    2011-01-01

    The Proteomics Identifications Database (PRIDE, http://www.ebi.ac.uk/pride ) provides users with the ability to explore and compare mass spectrometry-based proteomics experiments that reveal details of the protein expression found in a broad range of taxonomic groups, tissues, and disease states. A PRIDE experiment typically includes identifications of proteins, peptides, and protein modifications. Additionally, many of the submitted experiments also include the mass spectra that provide the evidence for these identifications. Finally, one of the strongest advantages of PRIDE in comparison with other proteomics repositories is the amount of metadata it contains, a key point to put the above-mentioned data in biological and/or technical context. Several informatics tools have been developed in support of the PRIDE database. The most recent one is called "Database on Demand" (DoD), which allows custom sequence databases to be built in order to optimize the results from search engines. We describe the use of DoD in this chapter. Additionally, in order to show the potential of PRIDE as a source for data mining, we also explore complex queries using federated BioMart queries to integrate PRIDE data with other resources, such as Ensembl, Reactome, or UniProt.

  3. Semantic Document Image Classification Based on Valuable Text Pattern

    Directory of Open Access Journals (Sweden)

    Hossein Pourghassem

    2011-01-01

    Full Text Available Knowledge extraction from detected document image is a complex problem in the field of information technology. This problem becomes more intricate when we know, a negligible percentage of the detected document images are valuable. In this paper, a segmentation-based classification algorithm is used to analysis the document image. In this algorithm, using a two-stage segmentation approach, regions of the image are detected, and then classified to document and non-document (pure region regions in the hierarchical classification. In this paper, a novel valuable definition is proposed to classify document image in to valuable or invaluable categories. The proposed algorithm is evaluated on a database consisting of the document and non-document image that provide from Internet. Experimental results show the efficiency of the proposed algorithm in the semantic document image classification. The proposed algorithm provides accuracy rate of 98.8% for valuable and invaluable document image classification problem.

  4. Valuable Internet Advertising and Customer Satisfaction Cycle(VIACSC)

    OpenAIRE

    Muhammad Awais; Tanzila Samin; Muhammad Bilal

    2012-01-01

    Now-a-days it is very important for the business persons to attract their target customers towards their products through valuable mode of promotion and communication. Increasing use of World Wide Web has completely changed the scenario of business sector. Customized products and services, customers preferences, @ and dot com craze have elevated the importance of internet advertising. This research paper investigates valuable internet advertising which will help to enhance the value of intern...

  5. Facebook: A Potentially Valuable Educational Tool?

    Science.gov (United States)

    Voivonta, Theodora; Avraamidou, Lucy

    2018-01-01

    This paper is concerned with the educational value of Facebook and specifically how it can be used in formal educational settings. As such, it provides a review of existing literature of how Facebook is used in higher education paying emphasis on the scope of its use and the outcomes achieved. As evident in existing literature, Facebook has been…

  6. Facebook : A potentially valuable educational tool?

    NARCIS (Netherlands)

    Voivonta, Theodora; Avraamidou, Lucy

    2018-01-01

    This paper is concerned with the educational value of Facebook and specifically how it can be used in formal educational settings. As such, it provides a review of existing literature of how Facebook is used in higher education paying emphasis on the scope of its use and the outcomes achieved. As

  7. Proving termination of logic programs with delay declarations

    NARCIS (Netherlands)

    E. Marchiori; F. Teusink (Frank)

    1996-01-01

    textabstractIn this paper we propose a method for proving termination of logic programs with delay declarations. The method is based on the notion of recurrent logic program, which is used to prove programs terminating wrt an arbitrary selection rule. Most importantly, we use the notion of bound

  8. Electronic theses and dissertations: a review of this valuable resource for nurse scholars worldwide.

    Science.gov (United States)

    Goodfellow, L M

    2009-06-01

    A worldwide repository of electronic theses and dissertations (ETDs) could provide worldwide access to the most up-to-date research generated by masters and doctoral students. Until that international repository is established, it is possible to access some of these valuable knowledge resources. ETDs provide a technologically advanced medium with endless multimedia capabilities that far exceed the print and bound copies of theses and dissertations housed traditionally in individual university libraries. CURRENT USE: A growing trend exists for universities worldwide to require graduate students to submit theses or dissertations as electronic documents. However, nurse scholars underutilize ETDs, as evidenced by perusing bibliographic citation lists in many of the research journals. ETDs can be searched for and retrieved through several digital resources such as the Networked Digital Library of Theses and Dissertations (http://www.ndltd.org), ProQuest Dissertations and Theses (http://www.umi.com), the Australasian Digital Theses Program (http://adt.caul.edu.au/) and through individual university web sites and online catalogues. An international repository of ETDs benefits the community of nurse scholars in many ways. The ability to access recent graduate students' research electronically from anywhere in the world is advantageous. For scholars residing in developing countries, access to these ETDs may prove to be even more valuable. In some cases, ETDs are not available for worldwide access and can only be accessed through the university library from which the student graduated. Public access to university library ETD collections is not always permitted. Nurse scholars from both developing and developed countries could benefit from ETDs.

  9. Recovering valuable liquid hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Pier, M

    1931-06-11

    A process for recovering valuable liquid hydrocarbons from coking coal, mineral coal, or oil shale through treatment with hydrogen under pressure at elevated temperature is described. Catalysts and grinding oil may be used in the process if necessary. The process provides for deashing the coal prior to hydrogenation and for preventing the coking and swelling of the deashed material. During the treatment with hydrogen, the coal is either mixed with coal low in bituminous material, such as lean coal or active coal, as a diluent or the bituminous constituents which cause the coking and swelling are removed by extraction with solvents. (BLM)

  10. Tool for Collaborative Autonomy, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Over the last 25 years, UAS have proven to be very valuable tools for performing a wide range of operations such as environmental disaster relief, search and rescue...

  11. NASA SPoRT GOES-R Proving Ground Activities

    Science.gov (United States)

    Stano, Geoffrey T.; Fuell, Kevin K.; Jedloec, Gary J.

    2010-01-01

    The NASA Short-term Prediction Research and Transition (SPoRT) program is a partner with the GOES-R Proving Ground (PG) helping prepare forecasters understand the unique products to come from the GOES-R instrument suite. SPoRT is working collaboratively with other members of the GOES-R PG team and Algorithm Working Group (AWG) scientists to develop and disseminate a suite of proxy products that address specific forecast problems for the WFOs, Regional and National Support Centers, and other NOAA users. These products draw on SPoRT s expertise with the transition and evaluation of products into operations from the MODIS instrument and the North Alabama Lightning Mapping Array (NALMA). The MODIS instrument serves as an excellent proxy for the Advanced Baseline Imager (ABI) that will be aboard GOES-R. SPoRT has transitioned and evaluated several multi-channel MODIS products. The true and false color products are being used in natural hazard detection by several SPoRT partners to provide better observation of land features, such as fires, smoke plumes, and snow cover. Additionally, many of SPoRT s partners are coastal offices and already benefit from the MODIS sea surface temperature composite. This, along with other surface feature observations will be developed into ABI proxy products for diagnostic use in the forecast process as well as assimilation into forecast models. In addition to the MODIS instrument, the NALMA has proven very valuable to WFOs with access to these total lightning data. These data provide situational awareness and enhanced warning decision making to improve lead times for severe thunderstorm and tornado warnings. One effort by SPoRT scientists includes a lightning threat product to create short-term model forecasts of lightning activity. Additionally, SPoRT is working with the AWG to create GLM proxy data from several of the ground based total lightning networks, such as the NALMA. The evaluation will focus on the vastly improved spatial

  12. Hemodynamic exercise testing. A valuable tool in the selection of cardiac transplantation candidates.

    Science.gov (United States)

    Chomsky, D B; Lang, C C; Rayos, G H; Shyr, Y; Yeoh, T K; Pierson, R N; Davis, S F; Wilson, J R

    1996-12-15

    Peak exercise oxygen consumption (Vo2), a noninvasive index of peak exercise cardiac output (CO), is widely used to select candidates for heart transplantation. However, peak exercise Vo2 can be influenced by noncardiac factors such as deconditioning, motivation, or body composition and may yield misleading prognostic information. Direct measurement of the CO response to exercise may avoid this problem and more accurately predict prognosis. Hemodynamic and ventilatory responses to maximal treadmill exercise were measured in 185 ambulatory patients with chronic heart failure who had been referred for cardiac transplantation (mean left ventricular ejection fraction, 22 +/- 7%; mean peak Vo2, 12.9 +/- 3.0 mL. min-1.kg-1). CO response to exercise was normal in 83 patients and reduced in 102. By univariate analysis, patients with normal CO responses had a better 1-year survival rate (95%) than did those with reduced CO responses (72%) (P 14 mL.min-1.kg-1 (88%) was not different from that of patients with peak Vo2 of 10 mL.min-1.kg-1 (89%) (P < .0001). By Cox regression analysis, exercise CO response was the strongest independent predictor of survival (risk ratio, 4.3), with peak Vo2 dichotomized at 10 mL. min-1.kg-1 (risk ratio, 3.3) as the only other independent predictor. Patients with reduced CO responses and peak Vo2 of < or = 10 mL.min-1.kg-1 had an extremely poor 1-year survival rate (38%). Both CO response to exercise and peak exercise Vo2 provide valuable independent prognostic information in ambulatory patients with heart failure. These variables should be used in combination to select potential heart transplantation candidates.

  13. An Educational Tool for Interactive Parallel and Distributed Processing

    DEFF Research Database (Denmark)

    Pagliarini, Luigi; Lund, Henrik Hautop

    2011-01-01

    In this paper we try to describe how the Modular Interactive Tiles System (MITS) can be a valuable tool for introducing students to interactive parallel and distributed processing programming. This is done by providing an educational hands-on tool that allows a change of representation of the abs......In this paper we try to describe how the Modular Interactive Tiles System (MITS) can be a valuable tool for introducing students to interactive parallel and distributed processing programming. This is done by providing an educational hands-on tool that allows a change of representation...... of the abstract problems related to designing interactive parallel and distributed systems. Indeed, MITS seems to bring a series of goals into the education, such as parallel programming, distributedness, communication protocols, master dependency, software behavioral models, adaptive interactivity, feedback......, connectivity, topology, island modeling, user and multiuser interaction, which can hardly be found in other tools. Finally, we introduce the system of modular interactive tiles as a tool for easy, fast, and flexible hands-on exploration of these issues, and through examples show how to implement interactive...

  14. Ravens reconcile after aggressive conflicts with valuable partners.

    Science.gov (United States)

    Fraser, Orlaith N; Bugnyar, Thomas

    2011-03-25

    Reconciliation, a post-conflict affiliative interaction between former opponents, is an important mechanism for reducing the costs of aggressive conflict in primates and some other mammals as it may repair the opponents' relationship and reduce post-conflict distress. Opponents who share a valuable relationship are expected to be more likely to reconcile as for such partners the benefits of relationship repair should outweigh the risk of renewed aggression. In birds, however, post-conflict behavior has thus far been marked by an apparent absence of reconciliation, suggested to result either from differing avian and mammalian strategies or because birds may not share valuable relationships with partners with whom they engage in aggressive conflict. Here, we demonstrate the occurrence of reconciliation in a group of captive subadult ravens (Corvus corax) and show that it is more likely to occur after conflicts between partners who share a valuable relationship. Furthermore, former opponents were less likely to engage in renewed aggression following reconciliation, suggesting that reconciliation repairs damage caused to their relationship by the preceding conflict. Our findings suggest not only that primate-like valuable relationships exist outside the pair bond in birds, but that such partners may employ the same mechanisms in birds as in primates to ensure that the benefits afforded by their relationships are maintained even when conflicts of interest escalate into aggression. These results provide further support for a convergent evolution of social strategies in avian and mammalian species.

  15. Proving Non-Deterministic Computations in Agda

    Directory of Open Access Journals (Sweden)

    Sergio Antoy

    2017-01-01

    Full Text Available We investigate proving properties of Curry programs using Agda. First, we address the functional correctness of Curry functions that, apart from some syntactic and semantic differences, are in the intersection of the two languages. Second, we use Agda to model non-deterministic functions with two distinct and competitive approaches incorporating the non-determinism. The first approach eliminates non-determinism by considering the set of all non-deterministic values produced by an application. The second approach encodes every non-deterministic choice that the application could perform. We consider our initial experiment a success. Although proving properties of programs is a notoriously difficult task, the functional logic paradigm does not seem to add any significant layer of difficulty or complexity to the task.

  16. 20 CFR 219.23 - Evidence to prove death.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Evidence to prove death. 219.23 Section 219... EVIDENCE REQUIRED FOR PAYMENT Evidence of Age and Death § 219.23 Evidence to prove death. (a) Preferred evidence of death. The best evidence of a person's death is— (1) A certified copy of or extract from the...

  17. Elliptic curves and primality proving

    Science.gov (United States)

    Atkin, A. O. L.; Morain, F.

    1993-07-01

    The aim of this paper is to describe the theory and implementation of the Elliptic Curve Primality Proving algorithm. Problema, numeros primos a compositis dignoscendi, hosque in factores suos primos resolvendi, ad gravissima ac utilissima totius arithmeticae pertinere, et geometrarum tum veterum tum recentiorum industriam ac sagacitatem occupavisse, tam notum est, ut de hac re copiose loqui superfluum foret.

  18. Explicitly integrating parameter, input, and structure uncertainties into Bayesian Neural Networks for probabilistic hydrologic forecasting

    KAUST Repository

    Zhang, Xuesong; Liang, Faming; Yu, Beibei; Zong, Ziliang

    2011-01-01

    Estimating uncertainty of hydrologic forecasting is valuable to water resources and other relevant decision making processes. Recently, Bayesian Neural Networks (BNNs) have been proved powerful tools for quantifying uncertainty of streamflow

  19. Storytelling: a leadership and educational tool.

    Science.gov (United States)

    Kowalski, Karren

    2015-06-01

    A powerful tool that leaders and educators can use to engage the listeners-both staff and learners-is storytelling. Stories demonstrate important points, valuable lessons, and the behaviors that are preferred by the leader. Copyright 2015, SLACK Incorporated.

  20. Seismic proving test of PWR reactor containment vessel

    International Nuclear Information System (INIS)

    Akiyama, H.; Yoshikawa, T.; Tokumaru, Y.

    1987-01-01

    The seismic reliability proving tests of nuclear power plant facilities are carried out by Nuclear Power Engineering Test Center (NUPEC), using the large-scale, high-performance vibration of Tadotsu Engineering Laboratory, and sponsored by the Ministry of International Trade and Industry (MITI). In 1982, the seismic reliability proving test of PWR containment vessel started using the test component of reduced scale 1/3.7 and the test component proved to have structural soundness against earthquakes. Subsequently, the detailed analysis and evaluation of these test results were carried out, and the analysis methods for evaluating strength against earthquakes were established. Whereupon, the seismic analysis and evaluation on the actual containment vessel were performed by these analysis methods, and the safety and reliability of the PWR reactor containment vessel were confirmed

  1. Preservice Mathematics Teachers' Metaphorical Perceptions towards Proof and Proving

    Science.gov (United States)

    Ersen, Zeynep Bahar

    2016-01-01

    Since mathematical proof and proving are in the center of mathematics; preservice mathematics teachers' perceptions against these concepts have a great importance. Therefore, the study aimed to determine preservice mathematics teachers' perceptions towards proof and proving through metaphors. The participants consisted of 192 preservice…

  2. Proving test on the reliability for nuclear valves

    International Nuclear Information System (INIS)

    Kajiyama, Yasuo; Tashiro, Hisao; Uga, Takeo; Maeda, Shunichi.

    1986-01-01

    Since valves are the most common components, they could be the most frequent causes of troubles in nuclear power plants. This proving test, therefore, has an important meaning to examine and verify the reliability of various valves under simulating conditions of abnormal and transient operations of the nuclear power plant. The test was performed mainly for the various types and pressure ratings of valves which were used in the primary and secondary systems in BWR and PWR nuclear power plants and which had major operating or safety related functions in those nuclear power plants. The results of the proving test, confirmed for more than four years, showed relatively favourable performance of the tested valves. It is concluded that performances of valves including operability, seat sealing and structural integrity were proved under the thermal cycling, vibration and pipe reaction load conditions. Operating functions during and after accident such as loss of coolant accident were satisfactory. From these results, it was considered that the purpose of this proving test was satisfactorily fulfilled. Several data accumulated by the test would be useful to get better reliability if it was evaluated with the actually experienced data of valves in the nuclear power plants. (Nogami, K.)

  3. Responsibility for proving and defining in abstract algebra class

    Science.gov (United States)

    Fukawa-Connelly, Timothy

    2016-07-01

    There is considerable variety in inquiry-oriented instruction, but what is common is that students assume roles in mathematical activity that in a traditional, lecture-based class are either assumed by the teacher (or text) or are not visible at all in traditional math classrooms. This paper is a case study of the teaching of an inquiry-based undergraduate abstract algebra course. In particular, gives a theoretical account of the defining and proving processes. The study examines the intellectual responsibility for the processes of defining and proving that the professor devolved to the students. While the professor wanted the students to engage in all aspects of defining and proving, he was only successful at devolving responsibility for certain aspects and much more successful at devolving responsibility for proving than conjecturing or defining. This study suggests that even a well-intentioned instructor may not be able to devolve responsibility to students for some aspects of mathematical practice without using a research-based curriculum or further professional development.

  4. Are patient surveys valuable as a service-improvement tool in health services? An overview

    Directory of Open Access Journals (Sweden)

    Patwardhan A

    2012-05-01

    Full Text Available Anjali Patwardhan,1 Charles H Spencer21Nationwide Children’s Hospital Columbus, 2Ohio State University, Columbus, OH, USAAbstract: Improving the quality of care in international health services was made a high priority in 1977. The World Health Assembly passed a resolution to greatly improve “Health for all” by the year 2000. Since 1977, the use of patient surveys for quality improvement has become a common practice in the health-care industry. The use of surveys reflects the concept that patient satisfaction is closely linked with that of organizational performance, which is in turn closely linked with organizational culture. This article is a review of the role of patient surveys as a quality-improvement tool in health care. The article explores the characteristics, types, merits, and pitfalls of various patient surveys, as well as the impact of their wide-ranging application in dissimilar scenarios to identify gaps in service provision. It is demonstrated that the conducting of patient surveys and using the results to improve the quality of care are two different processes. The value of patient surveys depends on the interplay between these two processes and several other factors that can influence the final outcome. The article also discusses the business aspect of the patient surveys in detail. Finally, the authors make future recommendations on how the patient survey tool can be best used to improve the quality of care in the health-care sector.Keywords: patient surveys, quality improvement, service gaps 

  5. The grid of information technologies as a new business tool; Las technologias grid de la informacion como nueva herramienta empresarial: definicion, taxonomia y niveles de adopcion

    Energy Technology Data Exchange (ETDEWEB)

    Maqueira Marin, J. M.; Bruque Camara, S.

    2011-07-01

    In this work we carry out a survey on the new possibilities that Grid Information Technology offers as a new business tool. The first step to understand the role of Grid Information Technology consists of identifying the dimensions of Grid definition. Furthermore and, in order to better understand the true impact of Grid Information Technology, we develop a classification of the different Grid applications that are coming up in the business field in the last few years. Finally, we develop a proposal that may prove valuable to measure and classify Grid adoption levels. This new proposal may come up appropriate to carry out empirical analyses focused on the business impact of Grid information Technology. (Author) 31 refs.

  6. Rapid assessment as an evaluation tool for polio national ...

    African Journals Online (AJOL)

    Rapid assessment as an evaluation tool for polio national immunisation days in Brong Ahafo region, Ghana. ... TM Akande, M Eshetu, G Bonsu ... Conclusion: Rapid assessment is a valuable tool for evaluation of NIDs; it enables timely intervention in covering missed children and helps in careful interpretation of the usual ...

  7. An Educational Tool for Creating Distributed Physical Games

    DEFF Research Database (Denmark)

    Lund, Henrik Hautop; Pagliarini, Luigi

    2011-01-01

    programming for physical games development. This is done by providing an educational tool that allows a change of representation of the problems related to game designing from a virtual to a physical representation. Indeed, MITS seems to be a valuable system for bringing into education a vast number of issues...... (such as parallel programming, distribution, communication protocols, master dependency, connectivity, topology, island modeling software behavioral models, adaptive interactivity, feedback, user and multi-user game interaction, etc.). This can both improve the education-related issues in computer......The development of physical interactive games demands extensive knowledge in engineering, computer science and gaming. In this paper we describe how the Modular Interactive Tiles System (MITS) can be a valuable tool for introducing students to interactive parallel and distributed processing...

  8. Geometric inequalities methods of proving

    CERN Document Server

    Sedrakyan, Hayk

    2017-01-01

    This unique collection of new and classical problems provides full coverage of geometric inequalities. Many of the 1,000 exercises are presented with detailed author-prepared-solutions, developing creativity and an arsenal of new approaches for solving mathematical problems. This book can serve teachers, high-school students, and mathematical competitors. It may also be used as supplemental reading, providing readers with new and classical methods for proving geometric inequalities. .

  9. Reasoning and Proving Opportunities in Textbooks: A Comparative Analysis

    Science.gov (United States)

    Hong, Dae S.; Choi, Kyong Mi

    2018-01-01

    In this study, we analyzed and compared reasoning and proving opportunities in geometry lessons from American standard-based textbooks and Korean textbooks to understand how these textbooks provide student opportunities to engage in reasoning and proving activities. Overall, around 40% of exercise problems in Core Plus Mathematics Project (CPMP)…

  10. A New Approach for Proving or Generating Combinatorial Identities

    Science.gov (United States)

    Gonzalez, Luis

    2010-01-01

    A new method for proving, in an immediate way, many combinatorial identities is presented. The method is based on a simple recursive combinatorial formula involving n + 1 arbitrary real parameters. Moreover, this formula enables one not only to prove, but also generate many different combinatorial identities (not being required to know them "a…

  11. Generic Example Proving Criteria for All

    Science.gov (United States)

    Yopp, David; Ely, Rob; Johnson­-Leung, Jennifer

    2015-01-01

    We review literature that discusses generic example proving and highlight ambiguities that pervade our research community's discourse about generic example arguments. We distinguish between pedagogical advice for choosing good examples that can serve as generic examples when teaching and advice for developing generic example arguments. We provide…

  12. SARS – Koch´Postulates proved.

    Indian Academy of Sciences (India)

    SARS – Koch´Postulates proved. Novel coronavirus identified from fluids of patients. Virus cultured in Vero cell line. Sera of patients have antibodies to virus. Cultured virus produces disease in Macaque monkeys. -produces specific immune response; -isolated virus is SARS CoV; -pathology similar to human.

  13. Spectroscopy applied to feed additives of the European Union Reference Laboratory: a valuable tool for traceability.

    Science.gov (United States)

    Omar, Jone; Slowikowski, Boleslaw; Boix, Ana; von Holst, Christoph

    2017-08-01

    Feed additives need to be authorised to be placed on the market according to Regulation (EU) No. 1831/2003. Next to laying down the procedural requirements, the regulation creates the European Union Reference Laboratory for Feed Additives (EURL-FA) and requires that applicants send samples to the EURL-FA. Once authorised, the characteristics of the marketed feed additives should correspond to those deposited in the sample bank of the EURL-FA. For this purpose, the submitted samples were subjected to near-infrared (NIR) and Raman spectroscopy for spectral characterisation. These techniques have the valuable potential of characterising the feed additives in a non-destructive manner without any complicated sample preparation. This paper describes the capability of spectroscopy for a rapid characterisation of products to establish whether specific authorisation criteria are met. This study is based on the analysis of feed additive samples from different categories and functional groups, namely products containing (1) selenium, (2) zinc and manganese, (3) vitamins and (4) essential oils such as oregano and thyme oil. The use of chemometrics turned out to be crucial, especially in cases where the differentiation of spectra by visual inspection was very difficult.

  14. The Vicinity of Program Documentation Tools

    DEFF Research Database (Denmark)

    Nørmark, Kurt

    between program development tools.  In the central part of the paper we introduce a mapping of documentation flow between program development tools.  In addition we discuss a set of locally developed tools which is related to program documentation.  The use of test cases as examples in an interface......Program documentation plays a vital role in almost all programming processes.  Program documentation flows between separate tools of a modularized environment, and in between the components of an integrated development environment as well.  In this paper we discuss the flow of program documentation...... documentation tool is a noteworthy and valuable contribution to the documentation flow.  As an additional contribution we identify several circular relationships which illustrate feedback of documentation to the program editor from other tools in the development environment....

  15. The Earth is Flat, and I Can Prove It!

    Science.gov (United States)

    Klinger, Art

    1998-01-01

    Describes an educational program that asks students to attempt to prove that the earth is spherical and that it rotates. Presents tips to pique student interest and charts related to sensing the spin, nonrotation notions, flat earth fallacies, evidence that the earth is spherical and rotates, and the role of watersheds in proving that the earth…

  16. Switchgrass a valuable biomass crop for energy

    CERN Document Server

    2012-01-01

    The demand of renewable energies is growing steadily both from policy and from industry which seeks environmentally friendly feed stocks. The recent policies enacted by the EU, USA and other industrialized countries foresee an increased interest in the cultivation of energy crops; there is clear evidence that switchgrass is one of the most promising biomass crop for energy production and bio-based economy and compounds. Switchgrass: A Valuable Biomass Crop for Energy provides a comprehensive guide to  switchgrass in terms of agricultural practices, potential use and markets, and environmental and social benefits. Considering this potential energy source from its biology, breed and crop physiology to its growth and management to the economical, social and environmental impacts, Switchgrass: A Valuable Biomass Crop for Energy brings together chapters from a range of experts in the field, including a foreword from Kenneth P. Vogel, to collect and present the environmental benefits and characteristics of this a ...

  17. Valuable human capital: the aging health care worker.

    Science.gov (United States)

    Collins, Sandra K; Collins, Kevin S

    2006-01-01

    With the workforce growing older and the supply of younger workers diminishing, it is critical for health care managers to understand the factors necessary to capitalize on their vintage employees. Retaining this segment of the workforce has a multitude of benefits including the preservation of valuable intellectual capital, which is necessary to ensure that health care organizations maintain their competitive advantage in the consumer-driven market. Retaining the aging employee is possible if health care managers learn the motivators and training differences associated with this category of the workforce. These employees should be considered a valuable resource of human capital because without their extensive expertise, intense loyalty and work ethic, and superior customer service skills, health care organizations could suffer severe economic repercussions in the near future.

  18. Energy threat to valuable land

    International Nuclear Information System (INIS)

    Caufield, C.

    1982-01-01

    Having considered the varying estimates of future UK energy requirements which have been made, the impact on the environment arising from the use of valuable sites for energy production is examined. It is shown that energy installations of all kinds clash with areas of natural beauty or ecological importance. As an example, a recent investigation of potential sites for nuclear power stations found that most of them were on or next to sites of special scientific interest, and other areas officially designated to be regarded as special or to be protected in some way. (U.K.)

  19. Kerr geometry in f(T) gravity

    Energy Technology Data Exchange (ETDEWEB)

    Bejarano, Cecilia; Guzman, Maria Jose [Instituto de Astronomia y Fisica del Espacio (IAFE, CONICET-UBA), Buenos Aires (Argentina); Ferraro, Rafael [Instituto de Astronomia y Fisica del Espacio (IAFE, CONICET-UBA), Buenos Aires (Argentina); Universidad de Buenos Aires, Departamento de Fisica, Facultad de Ciencias Exactas y Naturales, Buenos Aires (Argentina)

    2015-02-01

    Null tetrads are shown to be a valuable tool in teleparallel theories of modified gravity. We use them to prove that Kerr geometry remains a solution for a wide family of f(T) theories of gravity. (orig.)

  20. Kerr geometry in f(T) gravity

    International Nuclear Information System (INIS)

    Bejarano, Cecilia; Guzman, Maria Jose; Ferraro, Rafael

    2015-01-01

    Null tetrads are shown to be a valuable tool in teleparallel theories of modified gravity. We use them to prove that Kerr geometry remains a solution for a wide family of f(T) theories of gravity. (orig.)

  1. VALUABLE AND ORIENTATION FOUNDATIONS OF EDUCATIONAL SYSTEM OF THE COUNTRY

    Directory of Open Access Journals (Sweden)

    Vladimir I. Zagvyazinsky

    2016-01-01

    Full Text Available The aim of the investigation is to show that in modern market conditions it is necessary to keep humanistic valuable and orientation installations of domestic education and not to allow its slipping on a line item of utilitarian, quickly achievable, but not long-term benefits. Theoretical significance. The author emphasizes value of forming of an ideal – harmonious development of the personality – and the collectivist beginnings for disclosure of potential of each school student, a student, a worker, a specialist; also the author emphasizes on requirement of the stimulating, but not strictly regulated management of education. It is proved that copying of the western model of consecutive individualization of education without preserving the collectivist beginning is unacceptable in training, especially in educational process. In more general, strategic foreshortening this means that parity of the problem resolution of economy and the social sphere with which it is impossible to cope without support and educational development and first of all education, it is especially important during the periods of economic crises and stagnation for providing an exit from a crisis state on the basis of the advancing preparation and rational use of the personnel which neatly are considered as a human capital. Practical significance. Resources and positive tendencies in a development of education, especially elite, and also educational systems of some territories, including the Tyumen region where traditions of the enthusiasts-pioneers mastering the remote territories of oil and gas fields remain are shown. 

  2. Development of the Operational Events Groups Ranking Tool

    International Nuclear Information System (INIS)

    Simic, Zdenko; Banov, Reni

    2014-01-01

    Both because of complexity and ageing, facilities like nuclear power plants require feedback from the operating experience in order to further improve safety and operation performance. That is the reason why significant effort is dedicated to operating experience feedback. This paper contains description of the specification and development of the application for the operating events ranking software tool. Robust and consistent way of selecting most important events for detail investigation is important because it is not feasible or even useful to investigate all of them. Development of the tool is based on the comprehensive events characterisation and methodical prioritization. This includes rich set of events parameters which allow their top level preliminary analysis, different ways of groupings and even to evaluate uncertainty propagation to the ranking results. One distinct feature of the implemented method is that user (i.e., expert) could determine how important is particular ranking parameter based on their pairwise comparison. For tools demonstration and usability it is crucial that sample database is also created. For useful analysis the whole set of events for 5 years is selected and characterised. Based on the preliminary results this tool seems valuable for new preliminary prospective on data as whole, and especially for the identification of events groups which should have priority in the more detailed assessment. The results are consisting of different informative views on the events groups importance and related sensitivity and uncertainty results. This presents valuable tool for improving overall picture about specific operating experience and also for helping identify the most important events groups for further assessment. It is clear that completeness and consistency of the input data characterisation is very important to get full and valuable importance ranking. Method and tool development described in this paper is part of continuous effort of

  3. Preparing valuable hydrocarbons by hydrogenation

    Energy Technology Data Exchange (ETDEWEB)

    Pier, M

    1930-08-22

    A process is described for the preparation of valuable hydrocarbons by treatment of carbonaceous materials, like coal, tars, minerals oils, and their distillation and conversion products, and for refining of liquid hydrocarbon mixture obtained at raised temperature and under pressure, preferably in the presence of catalysts, by the use of hydrogen-containing gases, purified and obtained by distilling solid combustibles, characterized by the purification of the hydrogen-containing gases being accomplished for the purpose of practically complete removal of the oxygen by heating at ordinary or higher pressure in the presence of a catalyst containing silver and oxides of metals of group VI of the periodic system.

  4. Minimally invasive diagnosis of sarcoidosis by EBUS when conventional diagnostics fail

    DEFF Research Database (Denmark)

    Eckardt, J; Olsen, K E; Jørgensen, O D

    2010-01-01

    Endobronchial ultrasound-guided transbronchial fine-needle aspiration (EBUS) is a minimally invasive method used routinely for mediastinal staging of patients with lung cancer. EBUS has also proved to be a valuable diagnostic tool for patients with different intrathoracic lesions who remain...

  5. Overcoming the Obstacle of Poor Knowledge in Proving Geometry Tasks

    Directory of Open Access Journals (Sweden)

    Zlatan Magajna

    2013-12-01

    Full Text Available Proving in school geometry is not just about validating the truth of a claim. In the school setting, the main function of the proof is to convince someone that a claim is true by providing an explanation. Students consider proving to be difficult; in fact, they find the very concept of proof demanding. Proving a claim in planar geometry involves several processes, the most salient being visual observation and deductive argumentation. These two processes are interwoven, but often poor observation hinders deductive argumentation. In the present article, we consider the possibility of overcoming the obstacle of a student’s poor observation by making use of computer-aided observation with appropriate software. We present the results of two small-scale research projects, both of which indicate that students are able to work out considerably more deductions if computer-aided observation is used. Not all students use computer-aided observation effectively in proving tasks: some find an exhaustive computer-provided list of properties confusing and are not able to choose the properties that are relevant to the task.

  6. OPTIMIZING USABILITY OF AN ECONOMIC DECISION SUPPORT TOOL: PROTOTYPE OF THE EQUIPT TOOL.

    Science.gov (United States)

    Cheung, Kei Long; Hiligsmann, Mickaël; Präger, Maximilian; Jones, Teresa; Józwiak-Hagymásy, Judit; Muñoz, Celia; Lester-George, Adam; Pokhrel, Subhash; López-Nicolás, Ángel; Trapero-Bertran, Marta; Evers, Silvia M A A; de Vries, Hein

    2018-01-01

    Economic decision-support tools can provide valuable information for tobacco control stakeholders, but their usability may impact the adoption of such tools. This study aims to illustrate a mixed-method usability evaluation of an economic decision-support tool for tobacco control, using the EQUIPT ROI tool prototype as a case study. A cross-sectional mixed methods design was used, including a heuristic evaluation, a thinking aloud approach, and a questionnaire testing and exploring the usability of the Return of Investment tool. A total of sixty-six users evaluated the tool (thinking aloud) and completed the questionnaire. For the heuristic evaluation, four experts evaluated the interface. In total twenty-one percent of the respondents perceived good usability. A total of 118 usability problems were identified, from which twenty-six problems were categorized as most severe, indicating high priority to fix them before implementation. Combining user-based and expert-based evaluation methods is recommended as these were shown to identify unique usability problems. The evaluation provides input to optimize usability of a decision-support tool, and may serve as a vantage point for other developers to conduct usability evaluations to refine similar tools before wide-scale implementation. Such studies could reduce implementation gaps by optimizing usability, enhancing in turn the research impact of such interventions.

  7. On proving syntactic properties of CPS programs

    DEFF Research Database (Denmark)

    Danvy, Olivier; Dzafic, Belmina; Pfenning, Frank

    1999-01-01

    Higher-order program transformations raise new challenges for proving properties of their output, since they resist traditional, first-order proof techniques. In this work, we consider (1) the “one-pass” continuation-passing style (CPS) transformation, which is second-order, and (2) the occurrences...

  8. Data-Mining – A Valuable Managerial Tool for Improving Power Plants Efficiency

    Directory of Open Access Journals (Sweden)

    Danubianu Mirela

    2014-05-01

    Full Text Available Energy and environment are top priorities for the EU’s Europe 2020 Strategy. Both fields imply complex approaches and consistent investment. The paper presents an alternative to large investments to improve the efficiencies of existing (outdated power installations: namely the use of data-mining techniques for analysing existing operational data. Data-mining is based upon exhaustive analysis of operational records, inferring high-value information by simply processing records with advanced mathematical / statistical tools. Results can be: assessment of the consistency of measurements, identification of new hardware needed for improving the quality of data, deducing the most efficient level for operation (internal benchmarking, correlation of consumptions with power/ heat production, of technical parameters with environmental impact, scheduling the optimal maintenance time, fuel stock optimization, simulating scenarios for equipment operation, anticipating periods of maximal stress of equipment, identification of medium and long term trends, planning and decision support for new investment, etc. The paper presents a data mining process carried out at the TERMICA - Suceava power plant. The analysis calls for a multidisciplinary approach, a complex team (experts in power&heat production, mechanics, environmental protection, economists, and last but not least IT experts and can be carried out with lower expenses than an investment in new equipment. Involvement of top management of the company is essential, being the driving force and motivation source for the data-mining team. The approach presented is self learning as once established, the data-mining analytical, modelling and simulation procedures and associated parameter databases can adjust themselves by absorbing and processing new relevant information and can be used on a long term basis for monitoring the performance of the installation, certifying the soundness of managerial measures taken

  9. Production of Fatty Acid-Derived Valuable Chemicals in Synthetic Microbes

    International Nuclear Information System (INIS)

    Yu, Ai-Qun; Pratomo Juwono, Nina Kurniasih; Leong, Susanna Su Jan; Chang, Matthew Wook

    2014-01-01

    Fatty acid derivatives, such as hydroxy fatty acids, fatty alcohols, fatty acid methyl/ethyl esters, and fatty alka(e)nes, have a wide range of industrial applications including plastics, lubricants, and fuels. Currently, these chemicals are obtained mainly through chemical synthesis, which is complex and costly, and their availability from natural biological sources is extremely limited. Metabolic engineering of microorganisms has provided a platform for effective production of these valuable biochemicals. Notably, synthetic biology-based metabolic engineering strategies have been extensively applied to refactor microorganisms for improved biochemical production. Here, we reviewed: (i) the current status of metabolic engineering of microbes that produce fatty acid-derived valuable chemicals, and (ii) the recent progress of synthetic biology approaches that assist metabolic engineering, such as mRNA secondary structure engineering, sensor-regulator system, regulatable expression system, ultrasensitive input/output control system, and computer science-based design of complex gene circuits. Furthermore, key challenges and strategies were discussed. Finally, we concluded that synthetic biology provides useful metabolic engineering strategies for economically viable production of fatty acid-derived valuable chemicals in engineered microbes.

  10. Production of Fatty Acid-Derived Valuable Chemicals in Synthetic Microbes

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Ai-Qun; Pratomo Juwono, Nina Kurniasih [Department of Biochemistry, Yong Loo Lin School of Medicine, National University of Singapore, Singapore (Singapore); Synthetic Biology Research Program, National University of Singapore, Singapore (Singapore); Leong, Susanna Su Jan [Department of Biochemistry, Yong Loo Lin School of Medicine, National University of Singapore, Singapore (Singapore); Synthetic Biology Research Program, National University of Singapore, Singapore (Singapore); Singapore Institute of Technology, Singapore (Singapore); Chang, Matthew Wook, E-mail: bchcmw@nus.edu.sg [Department of Biochemistry, Yong Loo Lin School of Medicine, National University of Singapore, Singapore (Singapore); Synthetic Biology Research Program, National University of Singapore, Singapore (Singapore)

    2014-12-23

    Fatty acid derivatives, such as hydroxy fatty acids, fatty alcohols, fatty acid methyl/ethyl esters, and fatty alka(e)nes, have a wide range of industrial applications including plastics, lubricants, and fuels. Currently, these chemicals are obtained mainly through chemical synthesis, which is complex and costly, and their availability from natural biological sources is extremely limited. Metabolic engineering of microorganisms has provided a platform for effective production of these valuable biochemicals. Notably, synthetic biology-based metabolic engineering strategies have been extensively applied to refactor microorganisms for improved biochemical production. Here, we reviewed: (i) the current status of metabolic engineering of microbes that produce fatty acid-derived valuable chemicals, and (ii) the recent progress of synthetic biology approaches that assist metabolic engineering, such as mRNA secondary structure engineering, sensor-regulator system, regulatable expression system, ultrasensitive input/output control system, and computer science-based design of complex gene circuits. Furthermore, key challenges and strategies were discussed. Finally, we concluded that synthetic biology provides useful metabolic engineering strategies for economically viable production of fatty acid-derived valuable chemicals in engineered microbes.

  11. SunFast: A sun workstation based, fuel analysis scoping tool for pressurized water reactors

    International Nuclear Information System (INIS)

    Bohnhoff, W.J.

    1991-05-01

    The objective of this research was to develop a fuel cycle scoping program for light water reactors and implement the program on a workstation class computer. Nuclear fuel management problems are quite formidable due to the many fuel arrangement options available. Therefore, an engineer must perform multigroup diffusion calculations for a variety of different strategies in order to determine an optimum core reload. Standard fine mesh finite difference codes result in a considerable computational cost. A better approach is to build upon the proven reliability of currently available mainframe computer programs, and improve the engineering efficiency by taking advantage of the most useful characteristic of workstations: enhanced man/machine interaction. This dissertation contains a description of the methods and a user's guide for the interactive fuel cycle scoping program, SunFast. SunFast provides computational speed and accuracy of solution along with a synergetic coupling between the user and the machine. It should prove to be a valuable tool when extensive sets of similar calculations must be done at a low cost as is the case for assessing fuel management strategies. 40 refs

  12. New Therapies Offer Valuable Options for Patients with Melanoma

    Science.gov (United States)

    Two phase III clinical trials of new therapies for patients with metastatic melanoma presented in June at the 2011 ASCO conference confirmed that vemurafenib and ipilimumab (Yervoy™) offer valuable new options for the disease.

  13. Sign Language Legislation as a Tool for Sustainability

    Science.gov (United States)

    Pabsch, Annika

    2017-01-01

    This article explores three models of sustainability (environmental, economic, and social) and identifies characteristics of a sustainable community necessary to sustain the Deaf community as a whole. It is argued that sign language legislation is a valuable tool for achieving sustainability for the generations to come.

  14. A case report on inVALUABLE: insect value chain in a circular bioeconomy

    DEFF Research Database (Denmark)

    Heckmann, L.-H.; Andersen, J.L.; Eilenberg, J.

    2018-01-01

    partners span the entire value chain and include entrepreneurs, experts in biology, biotechnology, automation, processing and food tech and safety. This paper provides an overview of the goal, activities and some preliminary results obtained during the first year of the project.......The vision of inVALUABLE is to create a sustainable resource-efficient industry for animal production based on insects. inVALUABLE has focus on the R&D demand for scaling up production of insects in Denmark and assessing the application potential of particularly mealworms. The inVALUABLE consortium...

  15. Design and implementation of a web-based PET-CT reporting assessment and e-portfolio tool

    International Nuclear Information System (INIS)

    Subesinghe, M.; Goldstone, A.R.; Patel, C.N.; Chowdhury, F.U.; Scarsbrook, A.F.

    2015-01-01

    Highlights: • We describe a simple internet-based reporting tool to enhance PET-CT training. • Automatically created competency based metrics are valuable in monitoring progress. • This tool provides robust evidence of competency in PET-CT reporting

  16. Proving the correctness of unfold/fold program transformations using bisimulation

    DEFF Research Database (Denmark)

    Hamilton, Geoff W.; Jones, Neil

    2011-01-01

    by a labelled transition system whose bisimilarity relation is a congruence that coincides with contextual equivalence. Labelled transition systems are well-suited to represent global program behaviour. On the other hand, unfold/fold program transformations use generalization and folding, and neither is easy......This paper shows that a bisimulation approach can be used to prove the correctness of unfold/fold program transformation algorithms. As an illustration, we show how our approach can be use to prove the correctness of positive supercompilation (due to Sørensen et al). Traditional program equivalence...... to describe contextually, due to use of non-local information. We show that weak bisimulation on labelled transition systems gives an elegant framework to prove contextual equivalence of original and transformed programs. One reason is that folds can be seen in the context of corresponding unfolds....

  17. Evaluating water storage variations in the MENA region using GRACE satellite data

    KAUST Repository

    Lopez, Oliver; Houborg, Rasmus; McCabe, Matthew

    2013-01-01

    estimates of water storage and fluxes over areas covering a minimum of 150,000 km2 (length scales of a few hundred kilometers) and thus prove to be a valuable tool for regional water resources management, particularly for areas with a lack of in-situ data

  18. Brain diagnosis with imaging methods: Psychical changes made visible

    International Nuclear Information System (INIS)

    Anon.

    1988-01-01

    The First International Symposium on Imaging Methods in Psychiatry, held in May 1988 in Wuerzburg, very impressively has shown that imaging methods are on advance not only in medical diagnostics, but also in psychiatric diagnostics, where they already proved to be a valuable tool. (orig./MG) [de

  19. Seismic proving test of BWR primary loop recirculation system

    International Nuclear Information System (INIS)

    Sato, H.; Shigeta, M.; Karasawa, Y.

    1987-01-01

    The seismic proving test of BWR Primary Loop Recirculation system is the second test to use the large-scale, high-performance vibration table of Tadotsu Engineering Laboratory. The purpose of this test is to prove the seismic reliability of the primary loop recirculation system (PLR), one of the most important safety components in the BWR nuclear plants, and also to confirm the adequacy of seismic analysis method used in the current seismic design. To achieve the purpose, the test was conducted under conditions and scale as near as possible to actual systems. The strength proving test was carried out with the test model mounted on the vibration table in consideration of basic design earthquake ground motions and other conditions to confirm the soundness of structure and the strength against earthquakes. Detailed analysis and analytic evaluation of the data obtained from the test was conducted to confirm the adequacy of the seismic analysis method and earthquake response analysis method used in the current seismic design. Then, on the basis of the results obtained, the seismic safety and reliability of BWR primary loop recirculation of the actual plants was fully evaluated

  20. Endothelial cell cultures as a tool in biomaterial research

    NARCIS (Netherlands)

    Kirkpatrick, CJ; Otto, M; van Kooten, T; Krump, [No Value; Kriegsmann, J; Bittinger, F

    1999-01-01

    Progress in biocompatibility and tissue engineering would today be inconceivable without the aid of in vitro techniques. Endothelial cell cultures represent a valuable tool not just in haemocompatibility testing, but also in the concept of designing hybrid organs. In the past endothelial cells (EC)

  1. Spectroelectrochemistry: A valuable tool for the study of organometallic-alkyne, -vinylidene, -cumulene, -alkynyl and related complexes

    International Nuclear Information System (INIS)

    Low, Paul J.; Bock, Sören

    2013-01-01

    This review presents a highly selective summary of spectroelectrochemical methods used in the study of metal alkyne, acetylide, vinylidene and allenylidene complexes. The review is illustrated predominantly by the selected examples from the authors’ group that formed the basis of a lecture at the recent ISE Annual Meeting. Emphasis is placed on the use of spectroelectrochemical methods to study redox-induced ligand isomerisation reactions, and determination of molecular electronic structure, which complement the conventional tools available to the synthetic chemist for characterisation of molecular compounds. The role of computational studies in supporting the interpretation of spectroscopic data is also briefly discussed

  2. What makes a sustainability tool valuable, practical and useful in real-world healthcare practice? A mixed-methods study on the development of the Long Term Success Tool in Northwest London.

    Science.gov (United States)

    Lennox, Laura; Doyle, Cathal; Reed, Julie E; Bell, Derek

    2017-09-24

    Although improvement initiatives show benefits to patient care, they often fail to sustain. Models and frameworks exist to address this challenge, but issues with design, clarity and usability have been barriers to use in healthcare settings. This work aimed to collaborate with stakeholders to develop a sustainability tool relevant to people in healthcare settings and practical for use in improvement initiatives. Tool development was conducted in six stages. A scoping literature review, group discussions and a stakeholder engagement event explored literature findings and their resonance with stakeholders in healthcare settings. Interviews, small-scale trialling and piloting explored the design and tested the practicality of the tool in improvement initiatives. National Institute for Health Research Collaboration for Leadership in Applied Health Research and Care for Northwest London (CLAHRC NWL). CLAHRC NWL improvement initiative teams and staff. The iterative design process and engagement of stakeholders informed the articulation of the sustainability factors identified from the literature and guided tool design for practical application. Key iterations of factors and tool design are discussed. From the development process, the Long Term Success Tool (LTST) has been designed. The Tool supports those implementing improvements to reflect on 12 sustainability factors to identify risks to increase chances of achieving sustainability over time. The Tool is designed to provide a platform for improvement teams to share their own views on sustainability as well as learn about the different views held within their team to prompt discussion and actions. The development of the LTST has reinforced the importance of working with stakeholders to design strategies which respond to their needs and preferences and can practically be implemented in real-world settings. Further research is required to study the use and effectiveness of the tool in practice and assess engagement with

  3. The written mathematical communication profile of prospective math teacher in mathematical proving

    Science.gov (United States)

    Pantaleon, K. V.; Juniati, D.; Lukito, A.; Mandur, K.

    2018-01-01

    Written mathematical communication is the process of expressing mathematical ideas and understanding in writing. It is one of the important aspects that must be mastered by the prospective math teacher as tool of knowledge transfer. This research was a qualitative research that aimed to describe the mathematical communication profile of the prospective mathematics teacher in mathematical proving. This research involved 48 students of Mathematics Education Study Program; one of them with moderate math skills was chosen as the main subject. Data were collected through tests, assignments, and task-based interviews. The results of this study point out that in the proof of geometry, the subject explains what is understood, presents the idea in the form of drawing and symbols, and explains the content/meaning of a representation accurately and clearly, but the subject can not convey the argument systematically and logically. Whereas in the proof of algebra, the subject describes what is understood, explains the method used, and describes the content/meaning of a symbolic representation accurately, systematically, logically, but the argument presented is not clear because it is insufficient detailed and complete.

  4. Novel extractants with high selectivity for valuable metals in seawater. Calixarene derivatives

    International Nuclear Information System (INIS)

    Kakoi, Takahiko; Goto, Masahiro

    1997-01-01

    Seawater contains various valuable metals such as uranium and lithium. Therefore, attempts are being made to develop highly selective extractants which recognize target metal ions in reclaimed seawater. In this review, we have focused our study on the application of novel cyclic compound calixarene based extractants. A novel host compound calixarene, which is a cyclic compound connecting some phenol rings, is capable of forming several different extractant ring sizes and introducing various kinds of functional groups towards targeting of metal ions in seawater. Therefore, calixarene derivatives are capable of extracting valuable metals such as uranium, alkaline metals, heavy metals, rare earth metals and noble metals selectively by varying structural ring size and functional groups. The novel host compound calixarene has given promising results which line it up as a potential extractant for the separation of valuable metal ions in seawater. (author)

  5. Teaching Content Analysis through "Harry Potter"

    Science.gov (United States)

    Messinger, Adam M.

    2012-01-01

    Content analysis is a valuable research tool for social scientists that unfortunately can prove challenging to teach to undergraduate students. Published classroom exercises designed to teach content analysis have thus far been predominantly envisioned as lengthy projects for upper-level courses. A brief and engaging exercise may be more…

  6. In Vivo Imaging of Human 11C-Metformin in Peripheral Organs: Dosimetry, Biodistribution and Kinetic Analyses

    DEFF Research Database (Denmark)

    Gormsen, Lars Christian; Sundelin, Elias Immanuel; Jensen, Jonas Brorson

    2016-01-01

    -metformin through the bile both during the intravenous and during the oral part of the study. CONCLUSION: (11)C-metformin is suitable for imaging metformin uptake in target tissues and may prove a valuable tool to assess the impact of metformin treatment in patients with varying metformin transport capacity....

  7. Kidney Paired Donation and the "Valuable Consideration" Problem: The Experiences of Australia, Canada, and the United States.

    Science.gov (United States)

    Toews, Maeghan; Giancaspro, Mark; Richards, Bernadette; Ferrari, Paolo

    2017-09-01

    As organ donation rates remain unable to meet the needs of individuals waiting for transplants, it is necessary to identify reasons for this shortage and develop solutions to address it. The introduction of kidney paired donation (KPD) programs represents one such innovation that has become a valuable tool in donation systems around the world. Although KPD has been successful in increasing kidney donation and transplantation, there are lingering questions about its legality. Donation through KPD is done in exchange for-and with the expectation of-a reciprocal kidney donation and transplantation. It is this reciprocity that has caused concern about whether KPD complies with existing law. Organ donation systems around the world are almost universally structured to legally prohibit the commercial exchange of organs. Australia, Canada, and the United States have accomplished this goal by prohibiting the exchange of an organ for "valuable consideration," which is a legal term that has not historically been limited to monetary exchange. Whether or not KPD programs violate this legislative prohibition will depend on the specific legislative provision being considered, and the legal system and case law of the particular jurisdiction in question. This article compares the experiences of Australia, Canada, and the United States in determining the legality of KPD and highlights the need for legal clarity and flexibility as donation and transplantation systems continue to evolve.

  8. Clinical history in management of suspected syncope: A powerful diagnostic tool

    NARCIS (Netherlands)

    Sutton, Richard; van Dijk, Nynke; Wieling, Wouter

    2014-01-01

    In this paper, the role of history taking as a diagnostic tool in patients with transient loss of consciousness (TLOC) is addressed. From a literature review it can be demonstrated that, if properly performed, the history is a powerful diagnostic tool, which in the majority of cases proves to be the

  9. On proving syntactic properties of CPS programs

    DEFF Research Database (Denmark)

    Danvy, Olivier; Dzafic, Belmina; Pfenning, Frank

    1999-01-01

    Higher-order program transformations raise new challenges for proving properties of their output, since they resist traditional, first-order proof techniques. In this work, we consider (1) the “one-pass” continuation-passing style (CPS) transformation, which is second-order, and (2) the occurrences...... of parameters of continuations in its output. To this end, we specify the one-pass CPS transformation relationally and we use the proof technique of logical relations....

  10. Travel fosters tool use in wild chimpanzees.

    Science.gov (United States)

    Gruber, Thibaud; Zuberbühler, Klaus; Neumann, Christof

    2016-07-19

    Ecological variation influences the appearance and maintenance of tool use in animals, either due to necessity or opportunity, but little is known about the relative importance of these two factors. Here, we combined long-term behavioural data on feeding and travelling with six years of field experiments in a wild chimpanzee community. In the experiments, subjects engaged with natural logs, which contained energetically valuable honey that was only accessible through tool use. Engagement with the experiment was highest after periods of low fruit availability involving more travel between food patches, while instances of actual tool-using were significantly influenced by prior travel effort only. Additionally, combining data from the main chimpanzee study communities across Africa supported this result, insofar as groups with larger travel efforts had larger tool repertoires. Travel thus appears to foster tool use in wild chimpanzees and may also have been a driving force in early hominin technological evolution.

  11. Development and preliminary validation of the EASE: a tool to measure perceived singing voice function.

    Science.gov (United States)

    Phyland, Debra J; Pallant, Julie F; Benninger, Michael S; Thibeault, Susan L; Greenwood, Ken M; Smith, Julian A; Vallance, Neil

    2013-07-01

    Most voice self-rating tools are disease-specific measures and are not suitable for use with healthy voice users. There is a need for a tool that is sensitive to the subtleties of a singer's voice and to perceived physical changes in the singing voice mechanism as a function of load. The aim of this study was to devise and validate a scale to assess singer's perceptions of the current status of their singing voice. Ninety-five vocal health descriptors were collected from focus group interviews of singers. These were reviewed by 25 currently performing music theater (MT) singers. Based on a consensus technique, the number of descriptors was decreased to 42 items. These were administered to a sample of 284 professional MT singers using an online survey to evaluate their perception of current singing voice status. Principal component analysis identified two subsets of items. Rasch analysis was used to evaluate and refine these sets of items to form two 10-item subscales. Both subscales demonstrated good overall fit to the Rasch model, no differential item functioning by sex or age, and good internal consistency reliability. The two subscales were strongly correlated and subsequent Rasch analysis supported their combination to form a single 20-item scale with good psychometric properties. The Evaluation of the Ability to Sing Easily (EASE) is a concise clinical tool to assess singer's perceptions of the current status of their singing voice with good measurement properties. EASE may prove a useful tool to measure changes in the singing voice as indicators of the effect of vocal load. Furthermore, it may offer a valuable means for the prediction or screening of singers "at risk" of developing voice disorders. Copyright © 2013 The Voice Foundation. All rights reserved.

  12. IPython notebook essentials

    CERN Document Server

    Martins, L Felipe

    2014-01-01

    If you are a professional, student, or educator who wants to learn to use IPython Notebook as a tool for technical and scientific computing, visualization, and data analysis, this is the book for you. This book will prove valuable for anyone that needs to do computations in an agile environment.

  13. Women and mental health

    National Research Council Canada - National Science Library

    Kohen, Dora

    2000-01-01

    ... for the individual. Covering issues including perinatal psychiatric disorders, depression, eating disorders, schizophrenia, and alcohol and drug abuse - from a female perspective - Women and Mental Health will prove a valuable tool for all those working in the fields of mental health. Dora Kohen is a Consultant Psychiatrist and an Honorary Senior...

  14. Temporomandibular joint arthrography: normal anatomy and technique of examination

    International Nuclear Information System (INIS)

    Duvoisin, B.; Schnyder, P.; Klaus, E.; Jacques, B.

    1990-01-01

    Temporomandibular joint (TMJ) dysfunction is common. This entity is most often consecutive to internal derangements of the TMJ, which are not recognizable on plain films and tomograms. TMJ arthrography has proved a valuable tool in diagnosing these abnormalities. The technique of examination and normal arthrographic anatomy are reviewed. (author) [pt

  15. ICARUS: a tool for the assessment of energy conservation policy

    Energy Technology Data Exchange (ETDEWEB)

    Worrell, E; Beer, J de; Blok, C [Utrecht University, Utrecht (Netherlands). Dept. of Science, Technology and Society

    1993-07-01

    Energy saving is seen as the most important means by which a reduction of CO[sub 2] emission can be achieved. In order to be able to examine the economic feasibility of energy saving measures the database ICARUS has been developed at Utrecht University. ICARUS gives an analysis per sector of the measures available, the associated costs, and the amount of energy that can be saved by adopting them. The database has proved to be a valuable instrument in many policy studies. 3 refs., 2 figs., 1 tab.

  16. Line lessons: Enbridge's Northern Line provides valuable information

    Energy Technology Data Exchange (ETDEWEB)

    Ross, E.

    2000-02-01

    Experiences gained from the 14-year old Norman Wells crude oil pipeline in the Northwest Territories may provide operators with valuable insights in natural gas pipeline developments in northern Canada. The Norman Wells line is the first and only long-distance pipeline in North America buried in permafrost and has proven to be a veritable laboratory on pipeline behaviour in extremely cold climates which also happen to be discontinuous at the same time. The line was built by Enbridge with a 'limit state' design, i e. it was built to move within the permafrost within certain limits, the amount of movement depending upon the area in which the line was built. This technology, which is still cutting edge, allows the pipeline to react to the freeze-thaw cycle without being affected by the heaving and resettling. The knowledge gained from the Norman Wells Line has come in very useful in the more recent AltaGas Services project transporting natural gas from a nearby well into the the town of Inuvik. Enbridge also contributed to the development of various pipeline inspection tools such as the 'Geopig' which travels within the pipeline and can pinpoint the location of problems practically within a matter of inches, and the 'Rolligon' an amphibious vehicle with five-foot diameter rubber tires that displaces only two pounds per square inch, leaving barely a track as it travels along the right-of-way during times other than winter.

  17. Authentication of Primordial Characteristics of the CLBL-1 Cell Line Prove the Integrity of a Canine B-Cell Lymphoma in a Murine In Vivo Model

    OpenAIRE

    Rütgen, Barbara C.; Willenbrock, Saskia; Reimann-Berg, Nicola; Walter, Ingrid; Fuchs-Baumgartinger, Andrea; Wagner, Siegfried; Kovacic, Boris; Essler, Sabine E.; Schwendenwein, Ilse; Nolte, Ingo; Saalmüller, Armin; Escobar, Hugo Murua

    2012-01-01

    Cell lines are key tools in cancer research allowing the generation of neoplasias in animal models resembling the initial tumours able to mimic the original neoplasias closely in vivo. Canine lymphoma is the major hematopoietic malignancy in dogs and considered as a valuable spontaneous large animal model for human Non-Hodgkin's Lymphoma (NHL). Herein we describe the establishment and characterisation of an in vivo model using the canine B-cell lymphoma cell line CLBL-1 analysing the stabilit...

  18. Field Trips as Valuable Learning Experiences in Geography Courses

    Science.gov (United States)

    Krakowka, Amy Richmond

    2012-01-01

    Field trips have been acknowledged as valuable learning experiences in geography. This article uses Kolb's (1984) experiential learning model to discuss how students learn and how field trips can help enhance learning. Using Kolb's experiential learning theory as a guide in the design of field trips helps ensure that field trips contribute to…

  19. HC StratoMineR: A web-based tool for the rapid analysis of high content datasets

    NARCIS (Netherlands)

    Omta, W.; Heesbeen, R. van; Pagliero, R.; Velden, L. van der; Lelieveld, D.; Nellen, M.; Kramer, M.; Yeong, M.; Saeidi, A.; Medema, R.; Spruit, M.; Brinkkemper, S.; Klumperman, J.; Egan, D.

    2016-01-01

    High-content screening (HCS) can generate large multidimensional datasets and when aligned with the appropriate data mining tools, it can yield valuable insights into the mechanism of action of bioactive molecules. However, easy-to-use data mining tools are not widely available, with the result that

  20. HC StratoMineR : A Web-Based Tool for the Rapid Analysis of High-Content Datasets

    NARCIS (Netherlands)

    Omta, Wienand A; van Heesbeen, Roy G; Pagliero, Romina J; van der Velden, Lieke M; Lelieveld, Daphne; Nellen, Mehdi; Kramer, Maik; Yeong, Marley; Saeidi, Amir M; Medema, Rene H; Spruit, Marco; Brinkkemper, Sjaak; Klumperman, Judith; Egan, David A

    2016-01-01

    High-content screening (HCS) can generate large multidimensional datasets and when aligned with the appropriate data mining tools, it can yield valuable insights into the mechanism of action of bioactive molecules. However, easy-to-use data mining tools are not widely available, with the result that

  1. Fake News: A Technological Approach to Proving the Origins of Content, Using Blockchains.

    Science.gov (United States)

    Huckle, Steve; White, Martin

    2017-12-01

    In this article, we introduce a prototype of an innovative technology for proving the origins of captured digital media. In an era of fake news, when someone shows us a video or picture of some event, how can we trust its authenticity? It seems that the public no longer believe that traditional media is a reliable reference of fact, perhaps due, in part, to the onset of many diverse sources of conflicting information, via social media. Indeed, the issue of "fake" reached a crescendo during the 2016 U.S. Presidential Election, when the winner, Donald Trump, claimed that The New York Times was trying to discredit him by pushing disinformation. Current research into overcoming the problem of fake news does not focus on establishing the ownership of media resources used in such stories-the blockchain-based application introduced in this article is technology that is capable of indicating the authenticity of digital media. Put simply, using the trust mechanisms of blockchain technology, the tool can show, beyond doubt, the provenance of any source of digital media, including images used out of context in attempts to mislead. Although the application is an early prototype and its capability to find fake resources is somewhat limited, we outline future improvements that would overcome such limitations. Furthermore, we believe that our application (and its use of blockchain technology and standardized metadata) introduces a novel approach to overcoming falsities in news reporting and the provenance of media resources used therein. However, while our application has the potential to be able to verify the originality of media resources, we believe that technology is only capable of providing a partial solution to fake news. That is because it is incapable of proving the authenticity of a news story as a whole. We believe that takes human skills.

  2. Agricultural field reclamation utilizing native grass crop production

    Science.gov (United States)

    J. Cure

    2013-01-01

    Developing a method of agricultural field reclamation to native grasses in the Lower San Pedro Watershed could prove to be a valuable tool for educational and practical purposes. Agricultural field reclamation utilizing native grass crop production will address water table depletion, soil degradation and the economic viability of the communities within the watershed....

  3. Substrate topography: A valuable in vitro tool, but a clinical red herring for in vivo tenogenesis.

    Science.gov (United States)

    English, Andrew; Azeem, Ayesha; Spanoudes, Kyriakos; Jones, Eleanor; Tripathi, Bhawana; Basu, Nandita; McNamara, Karrina; Tofail, Syed A M; Rooney, Niall; Riley, Graham; O'Riordan, Alan; Cross, Graham; Hutmacher, Dietmar; Biggs, Manus; Pandit, Abhay; Zeugolis, Dimitrios I

    2015-11-01

    Controlling the cell-substrate interactions at the bio-interface is becoming an inherent element in the design of implantable devices. Modulation of cellular adhesion in vitro, through topographical cues, is a well-documented process that offers control over subsequent cellular functions. However, it is still unclear whether surface topography can be translated into a clinically functional response in vivo at the tissue/device interface. Herein, we demonstrated that anisotropic substrates with a groove depth of ∼317nm and ∼1988nm promoted human tenocyte alignment parallel to the underlying topography in vitro. However, the rigid poly(lactic-co-glycolic acid) substrates used in this study upregulated the expression of chondrogenic and osteogenic genes, indicating possible tenocyte trans-differentiation. Of significant importance is that none of the topographies assessed (∼37nm, ∼317nm and ∼1988nm groove depth) induced extracellular matrix orientation parallel to the substrate orientation in a rat patellar tendon model. These data indicate that two-dimensional imprinting technologies are useful tools for in vitro cell phenotype maintenance, rather than for organised neotissue formation in vivo, should multifactorial approaches that consider both surface topography and substrate rigidity be established. Herein, we ventured to assess the influence of parallel groves, ranging from nano- to micro-level, on tenocytes response in vitro and on host response using a tendon and a subcutaneous model. In vitro analysis indicates that anisotropically ordered micro-scale grooves, as opposed to nano-scale grooves, maintain physiological cell morphology. The rather rigid PLGA substrates appeared to induce trans-differentiation towards chondrogenic and/or steogenic lineage, as evidence by TILDA gene analysis. In vivo data in both tendon and subcutaneous models indicate that none of the substrates induced bidirectional host cell and tissue growth. Collective, these

  4. Application of high-resolution melting analysis for authenticity testing of valuable Dendrobium commercial products.

    Science.gov (United States)

    Dong, Xiaoman; Jiang, Chao; Yuan, Yuan; Peng, Daiyin; Luo, Yuqin; Zhao, Yuyang; Huang, Luqi

    2018-01-01

    The accurate identification of botanical origin in commercial products is important to ensure food authenticity and safety for consumers. The Dendrobium species have long been commercialised as functional food supplements and herbal medicines in Asia. Three valuable Dendrobium species, namely Dendrobium officinale, D. huoshanense and D. moniliforme, are often mutually adulterated in trade products in pursuit of higher profit. In this paper, a rapid and reliable semi-quantitative method for identifying the botanical origin of Dendrobium products in terminal markets was developed using high-resolution melting (HRM) analysis with specific primer pairs to target the trnL-F region. The HRM analysis method detected amounts of D. moniliforme adulterants as low as 1% in D. huoshanense or D. officinale products. The results have demonstrated that HRM analysis is a fast and effective tool for the differentiation of these Dendrobium species both for their authenticity as well as for the semi-quantitative determination of the purity of their processed products. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  5. [Multicenter validation of an evaluation tool for clinical training activities (SVAT) of the nursing students].

    Science.gov (United States)

    Finotto, Sergio; Gradellini, Cinzia; Bandini, Stefania; Burrai, Francesco; Lucchi Casadei, Sandra; Villani, Carolina; Vincenzi, Simone; Mecugni, Daniela

    2017-01-01

    To evaluate the psychometric characteristics of the Scheda di Valutazione delle Attività di Tirocinio (SVAT). The degree courses in Nursing of the University of Modena and Reggio Emilia, site of Reggio Emilia, the University of Bologna Formative Section BO1, Imola and training center of Cesena, the University of Ferrara training centers of Ferrara and Codigoro were all enrolled in the research. For the content validation the reactive Delphi method was chosen. The panel of experts expressed a qualitative-intuitive judgment on the adequacy of language and on the stimulus material (SVAT). For internal consistency Cronbach's alpha was calculated the. The test-retest method was used for the reliability of stability. all indicators of the SVAT have achieved a degree of consensus not less than 80% demonstrating its content validity. The face validity is demonstrated by an average score equal to or greater than 7 obtained by all indicators. The reliability of internal consistency of the SVAT was appraised by Cronbach's alpha that was 0.987 for the entire instrument. The reliability of the stability has been calculated through the correlation's coefficient expressed by Pearson's r that was 0.983 (p = 1.3E-198). in Italy there is no a "gold standard" tool to evaluate the clinical performance of nursing students during and at the end of their clinical training. The SVAT proves to be a valuable and reliable tool it furthermore could stimulate the discussion and the debate among educators and nurses, so that also in our country, it may be possible develop and refine tools that support the evaluation of clinical skills of nursing students.

  6. The Culture Audit: A Leadership Tool for Assessment and Strategic Planning in Diverse Schools and Colleges

    Science.gov (United States)

    Bustamante, Rebecca M.

    2006-01-01

    This module is designed to introduce educational leaders to an organizational assessment tool called a "culture audit." Literature on organizational cultural competence suggests that culture audits are a valuable tool for determining how well school policies, programs, and practices respond to the needs of diverse groups and prepare…

  7. Unexploded ordnance issues at Aberdeen Proving Ground: Background information

    Energy Technology Data Exchange (ETDEWEB)

    Rosenblatt, D.H.

    1996-11-01

    This document summarizes currently available information about the presence and significance of unexploded ordnance (UXO) in the two main areas of Aberdeen Proving Ground: Aberdeen Area and Edgewood Area. Known UXO in the land ranges of the Aberdeen Area consists entirely of conventional munitions. The Edgewood Area contains, in addition to conventional munitions, a significant quantity of chemical-munition UXO, which is reflected in the presence of chemical agent decomposition products in Edgewood Area ground-water samples. It may be concluded from current information that the UXO at Aberdeen Proving Ground has not adversely affected the environment through release of toxic substances to the public domain, especially not by water pathways, and is not likely to do so in the near future. Nevertheless, modest but periodic monitoring of groundwater and nearby surface waters would be a prudent policy.

  8. ReGaTE: Registration of Galaxy Tools in Elixir

    DEFF Research Database (Denmark)

    Doppelt-Azeroual, Olivia; Mareuil, Fabien; Deveaud, Eric

    2017-01-01

    such popular environment is the Galaxy framework, with currently more than 80 publicly available Galaxy servers around the world. In the context of a generic registry for bioinformatics software, such as bio.tools, Galaxy instances constitute a major source of valuable content. Yet there has been, to date...... of their services while enriching the software discovery function that bio.tools provides for its users. The source code of ReGaTE is freely available on Github at https://github.com/C3BI-pasteur-fr/ReGaTE....

  9. Classificació de proves no paramètriques. Com aplicar-les en SPSS

    Directory of Open Access Journals (Sweden)

    Vanesa Berlanga-Silvente

    2012-07-01

    Full Text Available Les proves no paramètriques engloben una sèrie de proves estadístiques, que tenen com a denominador comú l'absència de assumpcions sobre la llei de probabilitat que segueix la població de la qual ha estat extreta la mostra. Per aquesta raó és comú referir-s'hi com a proves de distribució lliure. A l'article es descriuen i treballen les proves no paramètriques ressaltant el seu fonament i les indicacions per al seu ús quan es tracta d'una sola mostra (Chi-quadrat, de dues mostres amb dades independents (U de Mann-Whitney, de dues mostres amb dades relacionades (T de Wilcoxon, de diverses mostres amb dades independents (H de Kruskal-Wallis i de diverses mostres amb dades relacionades (Friedman.

  10. Precision cut lung slices as an efficient tool for in vitro lung physio-pharmacotoxicology studies.

    Science.gov (United States)

    Morin, Jean-Paul; Baste, Jean-Marc; Gay, Arnaud; Crochemore, Clément; Corbière, Cécile; Monteil, Christelle

    2013-01-01

    1.We review the specific approaches for lung tissue slices preparation and incubation systems and the research application fields in which lung slices proved to be a very efficient alternative to animal experimentation for biomechanical, physiological, pharmacological and toxicological approaches. 2.Focus is made on air-liquid interface dynamic organ culture systems that allow direct tissue exposure to complex aerosol and that best mimic in vivo lung tissue physiology. 3.A compilation of research applications in the fields of vascular and airway reactivity, mucociliary transport, polyamine transport, xenobiotic biotransformation, chemicals toxicology and complex aerosols supports the concept that precision cut lung slices are a very efficient tool maintaining highly differentiated functions similar to in vivo lung organ when kept under dynamic organ culture. They also have been successfully used for lung gene transfer efficiency assessment, for lung viral infection efficiency assessment, for studies of tissue preservation media and tissue post-conditioning to optimize lung tissue viability before grafting. 4.Taken all together, the reviewed studies point to a great interest for precision cut lung slices as an efficient and valuable alternative to in vivo lung organ experimentation.

  11. Classification of lymph nodes in computerized tomography scans using extracting tools

    International Nuclear Information System (INIS)

    Alves, Allan F.F.; Pina, Diana R. de; Altemani, Joao M.C.

    2016-01-01

    Lymph node changes in the neck region may be originated by both inflammatory and tumor causes. Diagnostic imaging method such as computed tomography are used to distinguish between these two main causes of lymph nodes alterations. In this work we used feature extracting tools I CT scans such as the average value of pixels, wavelet entropy, skewness and kurtosis to assist the radiologist in diagnosing lymph nodes alterations. The wavelet entropy proved to be the best image characteristic parameter to differentiate between the two groups of patients evaluated in this study. The study of cervical lymph nodes changes by features extraction methods may prove to be an excellent tool to assist in differentiating between infectious / inflammatory and tumor causes in CT scans. (author)

  12. A modeling tool to support decision making in future hydropower development in Chile

    Science.gov (United States)

    Vicuna, S.; Hermansen, C.; Cerda, J. P.; Olivares, M. A.; Gomez, T. I.; Toha, E.; Poblete, D.; Mao, L.; Falvey, M. J.; Pliscoff, P.; Melo, O.; Lacy, S.; Peredo, M.; Marquet, P. A.; Maturana, J.; Gironas, J. A.

    2017-12-01

    Modeling tools support planning by providing transparent means to assess the outcome of natural resources management alternatives within technical frameworks in the presence of conflicting objectives. Such tools, when employed to model different scenarios, complement discussion in a policy-making context. Examples of practical use of this type of tool exist, such as the Canadian public forest management, but are not common, especially in the context of developing countries. We present a tool to support the selection from a portfolio of potential future hydropower projects in Chile. This tool, developed by a large team of researchers under the guidance of the Chilean Energy Ministry, is especially relevant in the context of evident regionalism, skepticism and change in societal values in a country that has achieved a sustained growth alongside increased demands from society. The tool operates at a scale of a river reach, between 1-5 km long, on a domain that can be defined according to the scale needs of the related discussion, and its application can vary from river basins to regions or other spatial configurations that may be of interest. The tool addresses both available hydropower potential and the existence (inferred or observed) of other ecological, social, cultural and productive characteristics of the territory which are valuable to society, and provides a means to evaluate their interaction. The occurrence of each of these other valuable characteristics in the territory is measured by generating a presence-density score for each. Considering the level of constraint each characteristic imposes on hydropower development, they are weighted against each other and an aggregate score is computed. With this information, optimal trade-offs are computed between additional hydropower capacity and valuable local characteristics over the entire domain, using the classical knapsack 0-1 optimization algorithm. Various scenarios of different weightings and hydropower

  13. Evaluation of depleted uranium in the environment at Aberdeen Proving Grounds, Maryland and Yuma Proving Grounds, Arizona. Final report

    International Nuclear Information System (INIS)

    Kennedy, P.L.; Clements, W.H.; Myers, O.B.; Bestgen, H.T.; Jenkins, D.G.

    1995-01-01

    This report represents an evaluation of depleted uranium (DU) introduced into the environment at the Aberdeen Proving Grounds (APG), Maryland and Yuma Proving Grounds (YPG) Arizona. This was a cooperative project between the Environmental Sciences and Statistical Analyses Groups at LANL and with the Department of Fishery and Wildlife Biology at Colorado State University. The project represents a unique approach to assessing the environmental impact of DU in two dissimilar ecosystems. Ecological exposure models were created for each ecosystem and sensitivity/uncertainty analyses were conducted to identify exposure pathways which were most influential in the fate and transport of DU in the environment. Research included field sampling, field exposure experiment, and laboratory experiments. The first section addresses DU at the APG site. Chapter topics include bioenergetics-based food web model; field exposure experiments; bioconcentration by phytoplankton and the toxicity of U to zooplankton; physical processes governing the desorption of uranium from sediment to water; transfer of uranium from sediment to benthic invertebrates; spead of adsorpion by benthic invertebrates; uptake of uranium by fish. The final section of the report addresses DU at the YPG site. Chapters include the following information: Du transport processes and pathway model; field studies of performance of exposure model; uptake and elimination rates for kangaroo rates; chemical toxicity in kangaroo rat kidneys

  14. Evaluation of depleted uranium in the environment at Aberdeen Proving Grounds, Maryland and Yuma Proving Grounds, Arizona. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kennedy, P.L.; Clements, W.H.; Myers, O.B.; Bestgen, H.T.; Jenkins, D.G. [Colorado State Univ., Fort Collins, CO (United States). Dept. of Fishery and Wildlife Biology

    1995-01-01

    This report represents an evaluation of depleted uranium (DU) introduced into the environment at the Aberdeen Proving Grounds (APG), Maryland and Yuma Proving Grounds (YPG) Arizona. This was a cooperative project between the Environmental Sciences and Statistical Analyses Groups at LANL and with the Department of Fishery and Wildlife Biology at Colorado State University. The project represents a unique approach to assessing the environmental impact of DU in two dissimilar ecosystems. Ecological exposure models were created for each ecosystem and sensitivity/uncertainty analyses were conducted to identify exposure pathways which were most influential in the fate and transport of DU in the environment. Research included field sampling, field exposure experiment, and laboratory experiments. The first section addresses DU at the APG site. Chapter topics include bioenergetics-based food web model; field exposure experiments; bioconcentration by phytoplankton and the toxicity of U to zooplankton; physical processes governing the desorption of uranium from sediment to water; transfer of uranium from sediment to benthic invertebrates; spead of adsorpion by benthic invertebrates; uptake of uranium by fish. The final section of the report addresses DU at the YPG site. Chapters include the following information: Du transport processes and pathway model; field studies of performance of exposure model; uptake and elimination rates for kangaroo rates; chemical toxicity in kangaroo rat kidneys.

  15. MVT a most valuable theorem

    CERN Document Server

    Smorynski, Craig

    2017-01-01

    This book is about the rise and supposed fall of the mean value theorem. It discusses the evolution of the theorem and the concepts behind it, how the theorem relates to other fundamental results in calculus, and modern re-evaluations of its role in the standard calculus course. The mean value theorem is one of the central results of calculus. It was called “the fundamental theorem of the differential calculus” because of its power to provide simple and rigorous proofs of basic results encountered in a first-year course in calculus. In mathematical terms, the book is a thorough treatment of this theorem and some related results in the field; in historical terms, it is not a history of calculus or mathematics, but a case study in both. MVT: A Most Valuable Theorem is aimed at those who teach calculus, especially those setting out to do so for the first time. It is also accessible to anyone who has finished the first semester of the standard course in the subject and will be of interest to undergraduate mat...

  16. Tools for Observation: Art and the Scientific Process

    Science.gov (United States)

    Pettit, E. C.; Coryell-Martin, M.; Maisch, K.

    2015-12-01

    Art can support the scientific process during different phases of a scientific discovery. Art can help explain and extend the scientific concepts for the general public; in this way art is a powerful tool for communication. Art can aid the scientist in processing and interpreting the data towards an understanding of the concepts and processes; in this way art is powerful - if often subconscious - tool to inform the process of discovery. Less often acknowledged, art can help engage students and inspire scientists during the initial development of ideas, observations, and questions; in this way art is a powerful tool to develop scientific questions and hypotheses. When we use art as a tool for communication of scientific discoveries, it helps break down barriers and makes science concepts less intimidating and more accessible and understandable for the learner. Scientists themselves use artistic concepts and processes - directly or indirectly - to help deepen their understanding. Teachers are following suit by using art more to stimulate students' creative thinking and problem solving. We show the value of teaching students to use the artistic "way of seeing" to develop their skills in observation, questioning, and critical thinking. In this way, art can be a powerful tool to engage students (from elementary to graduate) in the beginning phase of a scientific discovery, which is catalyzed by inquiry and curiosity. Through qualitative assessment of the Girls on Ice program, we show that many of the specific techniques taught by art teachers are valuable for science students to develop their observation skills. In particular, the concepts of contour drawing, squinting, gesture drawing, inverted drawing, and others can provide valuable training for student scientists. These art techniques encourage students to let go of preconceptions and "see" the world (the "data") in new ways they help students focus on both large-scale patterns and small-scale details.

  17. In situ analysis of soil at an open burning/open detonation disposal facility: J-Field, Aberdeen Proving Ground, Maryland

    International Nuclear Information System (INIS)

    Martino, L.; Cho, E.; Wrobel, J.

    1994-01-01

    Investigators have used a field-portable X-Ray Fluorescence (XRF) Analyzer to screen soils for a suite of metals indicative of the open burning and open detonation (OB/OD) activities that occurred at the J-Field site at Aberdeen Proving Ground, Maryland. The field XRF results were incorporated into a multiphase investigation of contaminants at the Toxic Burning Pits Area of Concern at J-Field. The authors determined that the field-portable XRF unit used for the study and the general concept of field XRF screening are invaluable tools for investigating an OB/OD site where intrusive sampling techniques could present unacceptable hazards to site workers

  18. Tools and Algorithms for the Construction and Analysis of Systems

    DEFF Research Database (Denmark)

    This book constitutes the refereed proceedings of the 10th International Conference on Tools and Algorithms for the Construction and Analysis of Systems, TACAS 2004, held in Barcelona, Spain in March/April 2004. The 37 revised full papers and 6 revised tool demonstration papers presented were...... carefully reviewed and selected from a total of 162 submissions. The papers are organized in topical sections on theorem proving, probabilistic model checking, testing, tools, explicit state and Petri nets, scheduling, constraint solving, timed systems, case studies, software, temporal logic, abstraction...

  19. An educational tool for interactive parallel and distributed processing

    DEFF Research Database (Denmark)

    Pagliarini, Luigi; Lund, Henrik Hautop

    2012-01-01

    In this article we try to describe how the modular interactive tiles system (MITS) can be a valuable tool for introducing students to interactive parallel and distributed processing programming. This is done by providing a handson educational tool that allows a change in the representation...... of abstract problems related to designing interactive parallel and distributed systems. Indeed, the MITS seems to bring a series of goals into education, such as parallel programming, distributedness, communication protocols, master dependency, software behavioral models, adaptive interactivity, feedback......, connectivity, topology, island modeling, and user and multi-user interaction which can rarely be found in other tools. Finally, we introduce the system of modular interactive tiles as a tool for easy, fast, and flexible hands-on exploration of these issues, and through examples we show how to implement...

  20. Per-operative vibration analysis: a valuable tool for defining correct stem insertion: preliminary report.

    Science.gov (United States)

    Mulier, Michiel; Pastrav, Cesar; Van der Perre, Georges

    2008-01-01

    Defining the stem insertion end point during total hip replacement still relies on the surgeon's feeling. When a custom-made stem prosthesis with an optimal fit into the femoral canal is used, the risk of per-operative fractures is even greater than with standard prostheses. Vibration analysis is used in other clinical settings and has been tested as a means to detect optimal stem insertion in the laboratory. The first per-operative use of vibration analysis during non-cemented custom-made stem insertion in 30 patients is reported here. Thirty patients eligible for total hip replacement with uncemented stem prosthesis were included. The neck of the stem was connected with a shaker that emitted white noise as excitation signal and an impedance head that measured the frequency response. The response signal was sent to a computer that analyzed the frequency response function after each insertion phase. A technician present in the operating theatre but outside the laminated airflow provided feed-back to the surgeon. The correlation index between the frequency response function measured during the last two insertion hammering sessions was >0.99 in 86.7% of the cases. In four cases the surgeon stopped the insertion procedure because of a perceived risk of fracture. Two special cases illustrating the potential benefit of per-operative vibration analysis are described. The results of intra-operative vibration analysis indicate that this technique may be a useful tool assisting the orthopaedic surgeon in defining the insertion endpoint of the stem. The development of a more user-friendly device is therefore warranted.

  1. λ5-Phosphorus-Containing α-Diazo Compounds: A Valuable Tool for Accessing Phosphorus-Functionalized Molecules.

    Science.gov (United States)

    Marinozzi, Maura; Pertusati, Fabrizio; Serpi, Michaela

    2016-11-23

    The compounds characterized by the presence of a λ 5 -phosphorus functionality at the α-position with respect to the diazo moiety, here referred to as λ 5 -phosphorus-containing α-diazo compounds (PCDCs), represent a vast class of extremely versatile reagents in organic chemistry and are particularly useful in the preparation of phosphonate- and phosphinoxide-functionalized molecules. Indeed, thanks to the high reactivity of the diazo moiety, PCDCs can be induced to undergo a wide variety of chemical transformations. Among them are carbon-hydrogen, as well as heteroatom-hydrogen insertion reactions, cyclopropanation, ylide formation, Wolff rearrangement, and cycloaddition reactions. PCDCs can be easily prepared from readily accessible precursors by a variety of different methods, such as diazotization, Bamford-Stevens-type elimination, and diazo transfer reactions. This evidence along with their relative stability and manageability make them appealing tools in organic synthesis. This Review aims to demonstrate the ongoing utility of PCDCs in the modern preparation of different classes of phosphorus-containing compounds, phosphonates, in particular. Furthermore, to address the lack of precedent collective papers, this Review also summarizes the methods for PCDCs preparation.

  2. MALDI-TOF mass spectrometry following short incubation on a solid medium is a valuable tool for rapid pathogen identification from positive blood cultures.

    Science.gov (United States)

    Kohlmann, Rebekka; Hoffmann, Alexander; Geis, Gabriele; Gatermann, Sören

    2015-01-01

    approach allowed an optimized treatment recommendation. MALDI-TOF MS following 4h pre-culture is a valuable tool for rapid pathogen identification from positive blood cultures, allowing easy integration in diagnostic routine and the opportunity of considerably earlier treatment adaptation. Copyright © 2015 Elsevier GmbH. All rights reserved.

  3. Salt Lakes of the African Rift System: A Valuable Research ...

    African Journals Online (AJOL)

    Salt Lakes of the African Rift System: A Valuable Research Opportunity for Insight into Nature's Concenrtated Multi-Electrolyte Science. JYN Philip, DMS Mosha. Abstract. The Tanzanian rift system salt lakes present significant cultural, ecological, recreational and economical values. Beyond the wealth of minerals, resources ...

  4. The production of audiovisual teaching tools in minimally invasive surgery.

    Science.gov (United States)

    Tolerton, Sarah K; Hugh, Thomas J; Cosman, Peter H

    2012-01-01

    Audiovisual learning resources have become valuable adjuncts to formal teaching in surgical training. This report discusses the process and challenges of preparing an audiovisual teaching tool for laparoscopic cholecystectomy. The relative value in surgical education and training, for both the creator and viewer are addressed. This audiovisual teaching resource was prepared as part of the Master of Surgery program at the University of Sydney, Australia. The different methods of video production used to create operative teaching tools are discussed. Collating and editing material for an audiovisual teaching resource can be a time-consuming and technically challenging process. However, quality learning resources can now be produced even with limited prior video editing experience. With minimal cost and suitable guidance to ensure clinically relevant content, most surgeons should be able to produce short, high-quality education videos of both open and minimally invasive surgery. Despite the challenges faced during production of audiovisual teaching tools, these resources are now relatively easy to produce using readily available software. These resources are particularly attractive to surgical trainees when real time operative footage is used. They serve as valuable adjuncts to formal teaching, particularly in the setting of minimally invasive surgery. Copyright © 2012 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  5. A Reference Architecture for a Cloud-Based Tools as a Service Workspace

    DEFF Research Database (Denmark)

    Chauhan, Aufeef; Babar, Muhammad Ali; Sheng, Quan Z.

    2015-01-01

    Software Architecture (SA) plays a critical role in developing and evolving cloud-based applications. We present a Reference Architecture (RA) for designing Cloud-based Tools as a service work SPACE (TSPACE) - a platform for provisioning chain of tools following the Software as a Service (SaaS...... evaluate the RA in terms of completeness and feasibility. Our proposed RA can provide valuable guidance and insights for designing and implementing concrete software architectures of TSPACE....

  6. IHSI [Induction Heating Stress Improvement] proves its worth

    International Nuclear Information System (INIS)

    Froehlich, C.H.; Cofie, N.G.; Sheffield, J.R.

    1988-01-01

    Based upon the wealth of experimental test data, extensive and successful in-plant application, and the decreasing cost of applying the process, IHSI is proving itself an important part of overall IGSCC mitigation programmes. Work is ongoing on the development of new temperature sensing systems, more efficient equipment immobilization/demobilization hardware configurations, and craft support management practices to further enhance the cost-effectiveness of IHSI. (author)

  7. Screening of Dementia in Portuguese Primary Care: Methodology, Assessment Tools, and Main Results

    Directory of Open Access Journals (Sweden)

    Laetitia Teixeira

    2017-11-01

    Full Text Available The objectives of this article are as follows: (1 to describe the assessment protocol used to outline people with probable dementia in Primary Health Care; (2 to show the methodological design and procedure to obtain a representative sample of patients with probable dementia; and (3 to report the main characteristics of the sample collected in the context of the study “Characteristics and needs of people with probable dementia.” The study protocol was based on the “Community Assessment of Risk and Treatment Strategies (CARTS Program” and is composed by a set of instruments that allow the assessment of older adults with probable dementia in several areas (health, psychological, functionality, and other. Descriptive analysis was used to characterize the final sample (n = 436. The study protocol as well as the methodological procedure to obtain the referral of research participants and data collection on the condition of people with probable dementia in Primary Health Care proved to be a valuable tool to obtain a sample of patients distributed by the full range of probable dementia in a large geographical area. Results may allocate the design of care pathways for old people with cognitive disorders to prevent, delay impairment, and/or optimize quality of life of patients.

  8. Software systems for energy control in the English industry

    International Nuclear Information System (INIS)

    Bouma, J.W.J.

    1993-01-01

    Monitoring and targeting software systems have proved to be valuable tools for energy control, permitting to save five to ten percent of energy. The article reviews the systems that are presently available in England and illustrates how these systems are successfully used in practice in small (British Telecom) and middle large (Charles Wells Brewery) industrial applications. (A.S.)

  9. Simulation of the Physics of Flight

    Science.gov (United States)

    Lane, W. Brian

    2013-01-01

    Computer simulations continue to prove to be a valuable tool in physics education. Based on the needs of an Aviation Physics course, we developed the PHYSics of FLIght Simulator (PhysFliS), which numerically solves Newton's second law for an airplane in flight based on standard aerodynamics relationships. The simulation can be used to pique…

  10. Use of screening action levels in risk management at Los Alamos National Laboratory

    International Nuclear Information System (INIS)

    Beck, J.R.; Hueske, K.L.; Dorries, A.M.

    1994-01-01

    The screening assessment approach used at Los Alamos National Laboratory has proved to be a valuable risk management tool in making decisions that are cost-effective, efficient, and defensible. Los Alamos has successfully used screening action levels to prioritize RFI activities, streamline data evaluation, and insure analytical methods are adequately sensitive to be protective of human health

  11. MRI and MRS on preserved samples as a tool in fish ecology.

    Science.gov (United States)

    Bock, Christian; Wermter, Felizitas C; Mintenbeck, Katja

    2017-05-01

    Magnetic Resonance Imaging (MRI) and Magnetic Resonance Spectroscopy (MRS) gain increasing attention and importance as a tool in marine ecology. So far, studies were largely limited to morphological studies, e.g. for the creation of digital libraries. Here, the utility of MRI and MRS for ecologists is tested and exemplified using formalin preserved samples of the Antarctic silverfish, Pleuragramma antarctica. As this species lacks a swim bladder, buoyancy is attained by the deposition of large amounts of lipids that are mainly stored in subcutaneous and intermuscular lipid sacs. In this study MRI and MRS are not only used to study internal morphology, but additionally to investigate functional morphology and to measure parameters of high ecological interest. The data are compared with literature data obtained by means of traditional ecological methods. The results from this study show that MR scans are not only an alternative to histological sections (as shown before), but even allow the visualization of particular features in delicate soft tissues, such as Pleuragramma's lipid sacs. 3D rendering techniques proved to be a useful tool to study organ volumes and lipid content, which usually requires laborious chemical lipid extraction and analysis. Moreover, the application of MRS even allows for an analysis of lipids and fatty acids within lipid sacs, which wouldn't be possible using destructive methods. MRI and MRS, in particular when used in combination, have the capacity to provide useful data on parameters of high ecological relevance and thus have proven to be a highly valuable addition, if not alternative, to the classical methods. Copyright © 2016 Elsevier Inc. All rights reserved.

  12. an assessment of timber trees producing valuable fruits and seeds ...

    African Journals Online (AJOL)

    User

    It is observed that most of the timber trees producing valuable fruits and seeds have low ... sector of the economy by providing major raw materials (saw logs, ... the trees also produce industrial raw materials like latex, ... villagers while avoiding some of the ecological costs of ..... enzymes of rats with carbon tetrachloride.

  13. Data Center IT Equipment Energy Assessment Tools: Current State of Commercial Tools, Proposal for a Future Set of Assessment Tools

    Energy Technology Data Exchange (ETDEWEB)

    Radhakrishnan, Ben D. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); National Univ., San Diego, CA (United States). School of Engineering

    2012-06-30

    This research project, which was conducted during the Summer and Fall of 2011, investigated some commercially available assessment tools with a focus on IT equipment to see if such tools could round out the DC Pro tool suite. In this research, the assessment capabilities of the various tools were compiled to help make “non-biased” information available to the public. This research should not be considered to be exhaustive on all existing vendor tools although a number of vendors were contacted. Large IT equipment OEM’s like IBM and Dell provide their proprietary internal automated software which does not work on any other IT equipment. However, found two companies with products that showed promise in performing automated assessments for IT equipment from different OEM vendors. This report documents the research and provides a list of software products reviewed, contacts and websites, product details, discussions with specific companies, a set of recommendations, and next steps. As a result of this research, a simple 3-level approach to an IT assessment tool is proposed along with an example of an assessment using a simple IT equipment data collection tool (Level 1, spreadsheet). The tool has been reviewed with the Green Grid and LBNL staff. The initial feedback has been positive although further refinement to the tool will be necessary. Proposed next steps include a field trial of at least two vendors’ software in two different data centers with an objective to prove the concept, ascertain the extent of energy and computational assessment, ease of installation and opportunities for continuous improvement. Based on the discussions, field trials (or case studies) are proposed with two vendors – JouleX (expected to be completed in 2012) and Sentilla.

  14. A tool for model based diagnostics of the AGS Booster

    International Nuclear Information System (INIS)

    Luccio, A.

    1993-01-01

    A model-based algorithmic tool was developed to search for lattice errors by a systematic analysis of orbit data in the AGS Booster synchrotron. The algorithm employs transfer matrices calculated with MAD between points in the ring. Iterative model fitting of the data allows one to find and eventually correct magnet displacements and angles or field errors. The tool, implemented on a HP-Apollo workstation system, has proved very general and of immediate physical interpretation

  15. Primary culture of glial cells from mouse sympathetic cervical ganglion: a valuable tool for studying glial cell biology.

    Science.gov (United States)

    de Almeida-Leite, Camila Megale; Arantes, Rosa Maria Esteves

    2010-12-15

    Central nervous system glial cells as astrocytes and microglia have been investigated in vitro and many intracellular pathways have been clarified upon various stimuli. Peripheral glial cells, however, are not as deeply investigated in vitro despite its importance role in inflammatory and neurodegenerative diseases. Based on our previous experience of culturing neuronal cells, our objective was to standardize and morphologically characterize a primary culture of mouse superior cervical ganglion glial cells in order to obtain a useful tool to study peripheral glial cell biology. Superior cervical ganglia from neonatal C57BL6 mice were enzymatically and mechanically dissociated and cells were plated on diluted Matrigel coated wells in a final concentration of 10,000cells/well. Five to 8 days post plating, glial cell cultures were fixed for morphological and immunocytochemical characterization. Glial cells showed a flat and irregular shape, two or three long cytoplasm processes, and round, oval or long shaped nuclei, with regular outline. Cell proliferation and mitosis were detected both qualitative and quantitatively. Glial cells were able to maintain their phenotype in our culture model including immunoreactivity against glial cell marker GFAP. This is the first description of immunocytochemical characterization of mouse sympathetic cervical ganglion glial cells in primary culture. This work discusses the uses and limitations of our model as a tool to study many aspects of peripheral glial cell biology. Copyright © 2010 Elsevier B.V. All rights reserved.

  16. Tracking pyrethroid toxicity in surface water samples: Exposure dynamics and toxicity identification tools for laboratory tests with Hyalella azteca (Amphipoda).

    Science.gov (United States)

    Deanovic, Linda A; Stillway, Marie; Hammock, Bruce G; Fong, Stephanie; Werner, Inge

    2018-02-01

    Pyrethroid insecticides are commonly used in pest control and are present at toxic concentrations in surface waters of agricultural and urban areas worldwide. Monitoring is challenging as a result of their high hydrophobicity and low toxicity thresholds, which often fall below the analytical methods detection limits (MDLs). Standard daphnid bioassays used in surface water monitoring are not sensitive enough to protect more susceptible invertebrate species such as the amphipod Hyalella azteca and chemical loss during toxicity testing is of concern. In the present study, we quantified toxicity loss during storage and testing, using both natural and synthetic water, and presented a tool to enhance toxic signal strength for improved sensitivity of H. azteca toxicity tests. The average half-life during storage in low-density polyethylene (LDPE) cubitainers (Fisher Scientific) at 4 °C of 5 pyrethroids (permethrin, bifenthrin, lambda-cyhalothrin, cyfluthrin, and esfenvalerate) and one organophosphate (chlorpyrifos; used as reference) was 1.4 d, and piperonyl butoxide (PBO) proved an effective tool to potentiate toxicity. We conclude that toxicity tests on ambient water samples containing these hydrophobic insecticides are likely to underestimate toxicity present in the field, and mimic short pulse rather than continuous exposures. Where these chemicals are of concern, the addition of PBO during testing can yield valuable information on their presence or absence. Environ Toxicol Chem 2018;37:462-472. © 2017 SETAC. © 2017 SETAC.

  17. SPoRT's Participation in the GOES-R Proving Ground Activity

    Science.gov (United States)

    Jedlovec, Gary; Fuell, Kevin; Smith, Matthew; Stano, Geoffrey; Molthan, Andrew

    2011-01-01

    The next generation geostationary satellite, GOES-R, will carry two new instruments with unique atmospheric and surface observing capabilities, the Advanced Baseline Imager (ABI) and the Geostationary Lightning Mapper (GLM), to study short-term weather processes. The ABI will bring enhanced multispectral observing capabilities with frequent refresh rates for regional and full disk coverage to geostationary orbit to address many existing and new forecast challenges. The GLM will, for the first time, provide the continuous monitoring of total lightning flashes over a hemispherical region from space. NOAA established the GOES-R Proving Ground activity several years ago to demonstrate the new capabilities of these instruments and to prepare forecasters for their day one use. Proving Ground partners work closely with algorithm developers and the end user community to develop and transition proxy data sets representing GOES-R observing capabilities. This close collaboration helps to maximize refine algorithms leading to the delivery of a product that effectively address a forecast challenge. The NASA Short-term Prediction Research and Transition (SPoRT) program has been a participant in the NOAA GOES-R Proving Ground activity by developing and disseminating selected GOES-R proxy products to collaborating WFOs and National Centers. Established in 2002 to demonstrate the weather and forecasting application of real-time EOS measurements, the SPoRT program has grown to be an end-to-end research to operations activity focused on the use of advanced NASA modeling and data assimilation approaches, nowcasting techniques, and unique high-resolution multispectral data from EOS satellites to improve short-term weather forecasts on a regional and local scale. Participation in the Proving Ground activities extends SPoRT s activities and taps its experience and expertise in diagnostic weather analysis, short-term weather forecasting, and the transition of research and experimental

  18. Automated Theorem Proving in High-Quality Software Design

    Science.gov (United States)

    Schumann, Johann; Swanson, Keith (Technical Monitor)

    2001-01-01

    The amount and complexity of software developed during the last few years has increased tremendously. In particular, programs are being used more and more in embedded systems (from car-brakes to plant-control). Many of these applications are safety-relevant, i.e. a malfunction of hardware or software can cause severe damage or loss. Tremendous risks are typically present in the area of aviation, (nuclear) power plants or (chemical) plant control. Here, even small problems can lead to thousands of casualties and huge financial losses. Large financial risks also exist when computer systems are used in the area of telecommunication (telephone, electronic commerce) or space exploration. Computer applications in this area are not only subject to safety considerations, but also security issues are important. All these systems must be designed and developed to guarantee high quality with respect to safety and security. Even in an industrial setting which is (or at least should be) aware of the high requirements in Software Engineering, many incidents occur. For example, the Warshaw Airbus crash, was caused by an incomplete requirements specification. Uncontrolled reuse of an Ariane 4 software module was the reason for the Ariane 5 disaster. Some recent incidents in the telecommunication area, like illegal "cloning" of smart-cards of D2GSM handies, or the extraction of (secret) passwords from German T-online users show that also in this area serious flaws can happen. Due to the inherent complexity of computer systems, most authors claim that only a rigorous application of formal methods in all stages of the software life cycle can ensure high quality of the software and lead to real safe and secure systems. In this paper, we will have a look, in how far automated theorem proving can contribute to a more widespread application of formal methods and their tools, and what automated theorem provers (ATPs) must provide in order to be useful.

  19. Renewable Energy Opportunties at Dugway Proving Ground, Utah

    Energy Technology Data Exchange (ETDEWEB)

    Orrell, Alice C.; Kora, Angela R.; Russo, Bryan J.; Horner, Jacob A.; Williamson, Jennifer L.; Weimar, Mark R.; Gorrissen, Willy J.; Nesse, Ronald J.; Dixon, Douglas R.

    2010-05-31

    This document provides an overview of renewable resource potential at Dugway Proving Ground, based primarily upon analysis of secondary data sources supplemented with limited on-site evaluations. This effort focuses on grid-connected generation of electricity from renewable energy sources and ground source heat pumps (GSHPs). The effort was funded by the U.S. Army Installation Management Command (IMCOM) as follow-on to the 2005 Department of Defense (DoD) Renewables Assessment.

  20. About new software and hardware tools in the education of 'Semiconductor Devices'

    International Nuclear Information System (INIS)

    Taneva, Ljudmila; Basheva, Bistra

    2009-01-01

    This paper describes the new tools, used in the education of ”Semiconductor Devices”, developed at the Technological School “Electronic Systems”, Department of the Technical University, Sofia. The software and hardware tools give the opportunity to achieve the right balance between theory and practice, and the students are given the chance to accumulate valuable “hands-on” skills. The main purpose of the developed lab exercises is to demonstrate the use of some electronic components and practice with them. Keywords: semiconductors, media software tool, hardware, education

  1. Quantitative PCR is a Valuable Tool to Monitor the Performance of DNA-Encoded Chemical Library Selections.

    Science.gov (United States)

    Li, Yizhou; Zimmermann, Gunther; Scheuermann, Jörg; Neri, Dario

    2017-05-04

    Phage-display libraries and DNA-encoded chemical libraries (DECLs) represent useful tools for the isolation of specific binding molecules from large combinatorial sets of compounds. With both methods, specific binders are recovered at the end of affinity capture procedures by using target proteins of interest immobilized on a solid support. However, although the efficiency of phage-display selections is routinely quantified by counting the phage titer before and after the affinity capture step, no similar quantification procedures have been reported for the characterization of DECL selections. In this article, we describe the potential and limitations of quantitative PCR (qPCR) methods for the evaluation of selection efficiency by using a combinatorial chemical library with more than 35 million compounds. In the experimental conditions chosen for the selections, a quantification of DNA input/recovery over five orders of magnitude could be performed, revealing a successful enrichment of abundant binders, which could be confirmed by DNA sequencing. qPCR provided rapid information about the performance of selections, thus facilitating the optimization of experimental conditions. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Clinical audit, a valuable tool to improve quality of care: General methodology and applications in nephrology

    Science.gov (United States)

    Esposito, Pasquale; Dal Canton, Antonio

    2014-01-01

    Evaluation and improvement of quality of care provided to the patients are of crucial importance in the daily clinical practice and in the health policy planning and financing. Different tools have been developed, including incident analysis, health technology assessment and clinical audit. The clinical audit consist of measuring a clinical outcome or a process, against well-defined standards set on the principles of evidence-based medicine in order to identify the changes needed to improve the quality of care. In particular, patients suffering from chronic renal diseases, present many problems that have been set as topics for clinical audit projects, such as hypertension, anaemia and mineral metabolism management. Although the results of these studies have been encouraging, demonstrating the effectiveness of audit, overall the present evidence is not clearly in favour of clinical audit. These findings call attention to the need to further studies to validate this methodology in different operating scenarios. This review examines the principle of clinical audit, focusing on experiences performed in nephrology settings. PMID:25374819

  3. MIDAS (Migraine Disability Assessment: a valuable tool for work-site identification of migraine in workers in Brazil

    Directory of Open Access Journals (Sweden)

    Yara Dadalti Fragoso

    Full Text Available CONTEXT: MIDAS was developed as a fast and efficient method for identification of migraine in need of medical evaluation and treatment. It was necessary to translate MIDAS, originally written in English, so as to apply it in Brazil and make it usable by individuals from a variety of social-economic-cultural backgrounds. OBJECTIVE: To translate and to apply MIDAS in Brazil. SETTING: Assessment of a sample of workers regularly employed by an oil refinery. SETTING: Refinaria Presidente Bernardes, Cubatão, São Paulo, Brazil. PARTICIPANTS: 404 workers of the company who correctly answered a questionnaire for the identification and evaluation of headache. When the individual considered it to be pertinent to his own needs, there was the option to answer MIDAS as well. METHODS: MIDAS, originally written in English, was translated into Brazilian Portuguese by a neurologist and by a translator specializing in medical texts. The final version of the translation was obtained when, for ten patients to whom it was applied, the text seemed clear and the results were consistent over three sessions. MAIN MEASUREMENTS: Prevalence and types of primary headaches, evaluation of MIDAS as a tool for identification of more severe cases. RESULTS: From the total of 419 questionnaires given to the employees, 404 were returned correctly completed. From these, 160 persons were identified as presenting headaches, 44 of whom considered it worthwhile answering MIDAS. Nine of these individuals who answered MIDAS were identified as severe cases of migraine due to disability caused by the condition. An interview on a later date confirmed these results. Three were cases of chronic daily headache (transformed migraine and six were cases of migraine. CONCLUSIONS: MIDAS translated to Brazilian Portuguese was a useful tool for identifying severe cases of migraine and of transformed migraine in a working environment. The workers did not consider MIDAS to be difficult to answer. Their

  4. Unicorns do exist: a tutorial on "proving" the null hypothesis.

    Science.gov (United States)

    Streiner, David L

    2003-12-01

    Introductory statistics classes teach us that we can never prove the null hypothesis; all we can do is reject or fail to reject it. However, there are times when it is necessary to try to prove the nonexistence of a difference between groups. This most often happens within the context of comparing a new treatment against an established one and showing that the new intervention is not inferior to the standard. This article first outlines the logic of "noninferiority" testing by differentiating between the null hypothesis (that which we are trying to nullify) and the "nill" hypothesis (there is no difference), reversing the role of the null and alternate hypotheses, and defining an interval within which groups are said to be equivalent. We then work through an example and show how to calculate sample sizes for noninferiority studies.

  5. Assessing Sustainability of Coral Reef Ecosystem Services using a Spatially-Explicit Decision Support Tool

    Science.gov (United States)

    Forecasting and communicating the potential outcomes of decision options requires support tools that aid in evaluating alternative scenarios in a user-friendly context and that highlight variables relevant to the decision options and valuable stakeholders. Envision is a GIS-base...

  6. On the problem of proving the existence of ''charmed'' particles

    International Nuclear Information System (INIS)

    Tyapkin, A.A.

    1975-01-01

    In order to search for ''charmed'' particles a possibility of performing an experiment is discussed in which one could observe a new particle and prove a necessity of introducting for this particle a new quantum number conserved in strong interactions

  7. Information systems project management: methods, tools, and techniques

    OpenAIRE

    Mcmanus, John; Wood-Harper, Trevor

    2004-01-01

    Information Systems Project Management offers a clear and logical exposition of how to plan, organise and monitor projects effectively in order to deliver quality information systems within time, to budget and quality. This new book by John McManus and Trevor Wood-Harper is suitable for upper level undergraduates and postgraduates studying project management and Information Systems. Practising managers will also find it to be a valuable tool in their work. Managing information systems pro...

  8. GBEP pilot Ghana. Very valuable and successful - a follow-up is suggested. Conclusions and recommendations

    Energy Technology Data Exchange (ETDEWEB)

    Hanekamp, E.; Vissers, P.; De Lint, S. [Partners for Innovation, Amsterdam (Netherlands)

    2013-02-15

    The Global Bio-Energy Partnership (GBEP) has developed a set of 24 sustainability indicators applicable to all forms of bio-energy and aimed at voluntary use by national governments. The GBEP indicators enable governments to assess the bio-energy sector and to develop new policies related to sustainable bio-energy production and use. These indicators have been piloted in Ghana. Modern bio-energy is a big opportunity for the region, which is why NL Agency adopted and supported the pilot, together with the Global Bio-Energy Partnership (GBEP). The pilot project also was supported by the ECOWAS Regional Centre for Renewable Energy and Energy Efficiency (ECREEE) and has been coordinated by the Council for Scientific and Industrial Research (CSIR). The Ghana Energy Commission took the responsibility to involve policymakers. Partners for Innovation was commissioned by NL Agency to provide technical assistance for the pilot. The main aims of the project are: (a) Enhancing the capacity of the host country Ghana (and ECOWAS) to use the GBEP indicators as a tool for assessing the sustainability of its bio-energy sector and/or developing sustainable bio-energy policies; (b) Learning lessons on how to apply the indicators and how to enhance their practicality as a tool for policymakers and giving this as feedback to the GBEP community. Three Ghanaian research institutes (CSIR-FORIG, CSIR-IIR and UG-ISSER) have studied 11 out of the 24 GBEP indicators in the pilot. The pilot has been a success: the 24 sustainability criteria appear to be very valuable for Ghana. As such the indicators provide, also for other governments, a practical tool to assess sustainability of biomass sectors and policies. The report also shows important insights on data availability and quality, and on the applicability of the GBEP indicators in Ghana. The final report provides concrete recommendations on: (1) How Ghana can proceed with the GBEP sustainability indicators; and (2) The lessons learned for

  9. Recovering valuable metals from recycled photovoltaic modules.

    Science.gov (United States)

    Yi, Youn Kyu; Kim, Hyun Soo; Tran, Tam; Hong, Sung Kil; Kim, Myong Jun

    2014-07-01

    Recovering valuable metals such as Si, Ag, Cu, and Al has become a pressing issue as end-of-life photovoltaic modules need to be recycled in the near future to meet legislative requirements in most countries. Of major interest is the recovery and recycling of high-purity silicon (> 99.9%) for the production of wafers and semiconductors. The value of Si in crystalline-type photovoltaic modules is estimated to be -$95/kW at the 2012 metal price. At the current installed capacity of 30 GW/yr, the metal value in the PV modules represents valuable resources that should be recovered in the future. The recycling of end-of-life photovoltaic modules would supply > 88,000 and 207,000 tpa Si by 2040 and 2050, respectively. This represents more than 50% of the required Si for module fabrication. Experimental testwork on crystalline Si modules could recover a > 99.98%-grade Si product by HNO3/NaOH leaching to remove Al, Ag, and Ti and other metal ions from the doped Si. A further pyrometallurgical smelting at 1520 degrees C using CaO-CaF2-SiO2 slag mixture to scavenge the residual metals after acid leaching could finally produce > 99.998%-grade Si. A process based on HNO3/NaOH leaching and subsequent smelting is proposed for recycling Si from rejected or recycled photovoltaic modules. Implications: The photovoltaic industry is considering options of recycling PV modules to recover metals such as Si, Ag, Cu, Al, and others used in the manufacturing of the PV cells. This is to retain its "green" image and to comply with current legislations in several countries. An evaluation of potential resources made available from PV wastes and the technologies used for processing these materials is therefore of significant importance to the industry. Of interest are the costs of processing and the potential revenues gained from recycling, which should determine the viability of economic recycling of PV modules in the future.

  10. World`s Most Valuable Brand Resonation With Categories of Different Customer Needs

    Directory of Open Access Journals (Sweden)

    Kaspars VIKSNE

    2017-09-01

    Full Text Available One of the key performance indicators of brand success is its value. Brand value is an outcome of brand`s performance in market, and is largely depended from brand`s ability to satisfy certain customer needs. For the greatest success in the world`s market brand should resonate its ability to satisfy some of customer`s most universal needs. In this paper authors strives to find out which of the needs world`s most successful brands are resonating with. Therefore paper goal is to is to determine what customer needs world`s most valuable brands are primarily satisfying. First part of paper authors briefly evaluate Maslow theory of needs. In second part of paper authors identify main challenges of brand valuation, and briefly describe today`s most valuable brands. In third part of paper authors analyzes if resonating certain human need in brand makes it to be more valuable. In last part of paper authors summarizes the main findings and gives recommendations for better marketing practices to other brands whose owners have high market ambitions. In order to attain the paper`s goal, authors will use following research methods: Comparative analysis for comparing brands in different brand rankings; Content analysis for determining what need satisfaction brand advertisements resonate; Data analysis for quantify the results gathered from content analysis

  11. Approach and tool for computer animation of fields in electrical apparatus

    International Nuclear Information System (INIS)

    Miltchev, Radoslav; Yatchev, Ivan S.; Ritchie, Ewen

    2002-01-01

    The paper presents a technical approach and post-processing tool for creating and displaying computer animation. The approach enables handling of two- and three-dimensional physical field phenomena results obtained from finite element software or to display movement processes in electrical apparatus simulations. The main goal of this work is to extend auxiliary features built in general-purpose CAD software working in the Windows environment. Different storage techniques were examined and the one employing image capturing was chosen. The developed tool provides benefits of independent visualisation, creating scenarios and facilities for exporting animations in common file fon-nats for distribution on different computer platforms. It also provides a valuable educational tool.(Author)

  12. Valutazione economica dello studio PROVE-IT

    Directory of Open Access Journals (Sweden)

    Lorenzo G. Mantovani

    2007-10-01

    Full Text Available Introduction: the PROVE-IT (“Intensive versus moderate lipid lowering with statins after acute coronary syndromes” was a comparison of pravastatin 40 mg/die versus atorvastatin 80 mg/die in patients with an acute coronary syndrome (ACS. Aim: our aim was to investigate the economic consequence of high dose of atorvastatin vs usual-dose of pravastatin in Italian patients with a history of acute coronary syndrome. Methods: the analysis is conducted on the basis of clinical outcomes of the PROVE-IT study. We conducted a cost-effectiveness analysis, comparing high dose of atorvastatin (80 mg/die versus usual-dose of pravastatin (40 mg/die in the perspective of the Italian National Health Service. We identified and quantified medical costs: drug costs according to the Italian National Therapeutic Formulary and hospitalizations were quantified based on the Italian National Health Service tariffs (2006. Effects were measured in terms of mortality and morbidity reduction (number of deaths, life years gained and frequency of hospitalizations. We considered an observation period of 24 months. The costs borne after the first 12 months were discounted using an annual rate of 3%. We conducted one and multi-way sensitivity analyses on unit cost and effectiveness. We also conducted a threshold analysis. Results: the cost of pravastatin or atorvastatin therapy over the 2 years period amounted to approximately 1.3 millions euro and 870,000 euro per 1,000 patients respectively. Atorvastatin was more efficacious compared to pravastatin and the overall cost of care per 1,000 patients over 24 months of follow-up was estimated at 3.2 millions euro in the pravastatin and 2.5 millions euro in the atorvastatin group, resulting into a cost saving of about 700,000 euro that is 27% of total costs occurred in the pravastatin group. Discussion: this study demonstrates that high does atorvastatin treatment leads to a reduction of direct costs for the National Health System

  13. Acidity titration curves - a versatile tool for the characterisation of acidic mine waste water

    International Nuclear Information System (INIS)

    Fyson, A.

    2000-01-01

    Acidity titrations with NaOH are valuable tools for characterisation of acidic mine waters. - Titrations can be used to estimate metal concentrations. - Titrations can be carried out in the field, minimising changes in water chemistry due to sample handling time and procedure. (orig.)

  14. An alternative approach to recovering valuable metals from zinc phosphating sludge.

    Science.gov (United States)

    Kuo, Yi-Ming

    2012-01-30

    This study used a vitrification process (with good potential for commercialization) to recover valuable metals from Zn phosphating sludge. The involved vitrification process achieves two major goals: it transformed hazardous Zn phosphating sludge into inert slag and it concentrated Fe (83.5%) and Zn (92.8%) into ingot and fine particulate-phase material, respectively. The Fe content in the ingot was 278,000 mg/kg, making the ingot a potential raw material for iron making. The fine particulate-phase material (collected from flue gas) contained abundant Zn (544,000 mg/kg) in the form of ZnO. The content (67.7%) of ZnO was high, so it can be directly sold to refineries. The recovered coarse particulate-phase material, with insufficient amount of ZnO, can be recycled as a feeding material for Zn re-concentration. Therefore, the vitrification process can not only treat hazardous materials but also effectively recover valuable metals. Copyright © 2011 Elsevier B.V. All rights reserved.

  15. Model-Based Design Tools for Extending COTS Components To Extreme Environments, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The innovation in this Phase I project is to prove the feasibility of using model-based design (MBD) tools to predict the performance and useful life of...

  16. Use of Torness simulator as a design and commissioning tool

    International Nuclear Information System (INIS)

    Hamilton, J.; Hacking, D.

    1989-01-01

    Real-time replica control room simulators are now in general use for the training of nuclear power plant operators, and the almost universal trend towards accurate physics-based plant models and detailed operator interface has opened up interesting and valuable engineering applications. This paper discusses the use of the Torness AGR Simulator in its dual role of commissioning support tool and operator training facility. (author)

  17. Searching for fixed point combinators by using automated theorem proving: A preliminary report

    International Nuclear Information System (INIS)

    Wos, L.; McCune, W.

    1988-09-01

    In this report, we establish that the use of an automated theorem- proving program to study deep questions from mathematics and logic is indeed an excellent move. Among such problems, we focus mainly on that concerning the construction of fixed point combinators---a problem considered by logicians to be significant and difficult to solve, and often computationally intensive and arduous. To be a fixed point combinator, Θ must satisfy the equation Θx = x(Θx) for all combinators x. The specific questions on which we focus most heavily ask, for each chosen set of combinators, whether a fixed point combinator can be constructed from the members of that set. For answering questions of this type, we present a new, sound, and efficient method, called the kernel method, which can be applied quite easily by hand and very easily by an automated theorem-proving program. For the application of the kernel method by a theorem-proving program, we illustrate the vital role that is played by both paramodulation and demodulation---two of the powerful features frequently offered by an automated theorem-proving program for treating equality as if it is ''understood.'' We also state a conjecture that, if proved, establishes the completeness of the kernel method. From what we can ascertain, this method---which relies on the introduced concepts of kernel and superkernel---offers the first systematic approach for searching for fixed point combinators. We successfully apply the new kernel method to various sets of combinators and, for the set consisting of the combinators B and W, construct an infinite set of fixed point combinators such that no two of the combinators are equal even in the presence of extensionality---a law that asserts that two combinators are equal if they behave the same. 18 refs

  18. Searching for fixed point combinators by using automated theorem proving: A preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    Wos, L.; McCune, W.

    1988-09-01

    In this report, we establish that the use of an automated theorem- proving program to study deep questions from mathematics and logic is indeed an excellent move. Among such problems, we focus mainly on that concerning the construction of fixed point combinators---a problem considered by logicians to be significant and difficult to solve, and often computationally intensive and arduous. To be a fixed point combinator, THETA must satisfy the equation THETAx = x(THETAx) for all combinators x. The specific questions on which we focus most heavily ask, for each chosen set of combinators, whether a fixed point combinator can be constructed from the members of that set. For answering questions of this type, we present a new, sound, and efficient method, called the kernel method, which can be applied quite easily by hand and very easily by an automated theorem-proving program. For the application of the kernel method by a theorem-proving program, we illustrate the vital role that is played by both paramodulation and demodulation---two of the powerful features frequently offered by an automated theorem-proving program for treating equality as if it is ''understood.'' We also state a conjecture that, if proved, establishes the completeness of the kernel method. From what we can ascertain, this method---which relies on the introduced concepts of kernel and superkernel---offers the first systematic approach for searching for fixed point combinators. We successfully apply the new kernel method to various sets of combinators and, for the set consisting of the combinators B and W, construct an infinite set of fixed point combinators such that no two of the combinators are equal even in the presence of extensionality---a law that asserts that two combinators are equal if they behave the same. 18 refs.

  19. A combination of troponin T and 12-lead electrocardiography: a valuable tool for early prediction of long-term mortality in patients with chest pain without ST-segment elevation.

    Science.gov (United States)

    Jernberg, Tomas; Lindahl, Bertil

    2002-11-01

    Electrocardiography (ECG) obtained on admission and a troponin T (tn-T) level measured early after admission are simple and accessible methods for predicting outcome in patients with suspected unstable angina or myocardial infarction without persistent ST-elevations. However, there are few studies about the combination of these 2 methods as a means of predicting long-term outcome. ECG was obtained on admission, and a tn-T level was analyzed on admission and after 6 hours in 710 consecutive patients admitted because of chest pain and no ST-elevations. Patients were observed for a median time of 40 months for death. ST-segment depressions > or =0.05 mV were present in 266 patients (37%). These patients had a 9.7-fold increased risk of death, compared with patients with normal ECG results. Isolated T-Wave inversions or pathological signs other than ST-T changes were present in 196 patients (28%), who had a 4.5-fold increased risk of death compared with patients who had normal ECG results. At 6 hours after admission, 169 patients (24%) had at least 1 sample of tn-T > or =0.10 microg/L, which resulted in an 3.7-fold increased risk of death. In a multivariate analysis, both ECG on admission and tn-T level came out as independent predictors of outcome. When these methods were combined, patients could be divided into low- (tn-T level or =0.10 microg/L or ST-segment depression), and high-risk groups (tn-T level > or =0.10 microg/L and ST-segment depression). ECG and tn-T level are valuable tools to quickly risk stratify patients with chest pain. The combination of these methods is superior to either one alone.

  20. Magnetic Seizure Therapy for Unipolar and Bipolar Depression: A Systematic Review

    OpenAIRE

    Cretaz, Eric; Brunoni, Andr? R.; Lafer, Beny

    2015-01-01

    Objective. Magnetic seizure therapy (MST) is a novel, experimental therapeutic intervention, which combines therapeutic aspects of electroconvulsive therapy (ECT) and transcranial magnetic stimulation, in order to achieve the efficacy of the former with the safety of the latter. MST might prove to be a valuable tool in the treatment of mood disorders, such as major depressive disorder (MDD) and bipolar disorder. Our aim is to r...

  1. A survey of the year 2007 literature on applications of isothermal titration calorimetry

    OpenAIRE

    Bjelic, S; Jelesarov, I

    2008-01-01

    Elucidation of the energetic principles of binding affinity and specificity is a central task in many branches of current sciences: biology, medicine, pharmacology, chemistry, material sciences, etc. In biomedical research, integral approaches combining structural information with in-solution biophysical data have proved to be a powerful way toward understanding the physical basis of vital cellular phenomena. Isothermal titration calorimetry (ITC) is a valuable experimental tool facilitating ...

  2. The role of thoracic ultrasonography in the diagnosis of pulmonary embolism

    Directory of Open Access Journals (Sweden)

    Sevda Sener Comert

    2013-01-01

    Conclusions: TUS with a high sensitivity and diagnostic accuracy, is a noninvasive, widely available, cost-effective method which can be rapidly performed. A negative TUS study cannot rule out PE with certainty, but positive TUS findings with moderate/high suspicion for PE may prove a valuable tool in diagnosis of PE at bedside especially at emergency setting, for critically ill and immobile patients, facilitating immediate treatment decision.

  3. Metagenomes provide valuable comparative information on soil microeukaryotes

    DEFF Research Database (Denmark)

    Jacquiod, Samuel Jehan Auguste; Stenbæk, Jonas; Santos, Susana

    2016-01-01

    has been identified. Our analyses suggest that publicly available metagenome data can provide valuable information on soil microeukaryotes for comparative purposes when handled appropriately, complementing the current view provided by ribosomal amplicon sequencing methods......., providing microbiologists with substantial amounts of accessible information. We took advantage of public metagenomes in order to investigate microeukaryote communities in a well characterized grassland soil. The data gathered allowed the evaluation of several factors impacting the community structure......, including the DNA extraction method, the database choice and also the annotation procedure. While most studies on soil microeukaryotes are based on sequencing of PCR-amplified taxonomic markers (18S rRNA genes, ITS regions), this work represents, to our knowledge, the first report based solely...

  4. Tool-based requirement traceability between requirement and design artifacts

    CERN Document Server

    Turban, Bernhard

    2013-01-01

    Processes for developing safety-critical systems impose special demands on ensuring requirements traceability. Achieving valuable traceability information, however, is especially difficult concerning the transition from requirements to design. Bernhard Turban analyzes systems and software engineering theories cross-cutting the issue (embedded systems development, systems engineering, software engineering, requirements engineering and management, design theory and processes for safety-critical systems). As a solution, the author proposes a new tool approach to support designers in their thinkin

  5. The in-pile proving test for fuel assembly of Qinshan nuclear power plant

    International Nuclear Information System (INIS)

    Chen Dianshan; Zhang Shucheng; Kang Rixin; Wang Huarong; Chen Guanghan

    1989-10-01

    The in-pile proving test for fuel assembly of Qinshan nuclear power plant had been conducted in the experimental loop of HWRR at IAE (Institute of Atomic Energy) in Beijing, China, from January 1985 to December 1986. Average burnup of 27000 MWd/tU and peak burnup of 34000 MWd/tU of fuel rod had already been reached. The basic status of the experiment are described, emphasis is placed on the discussion of proving test parameters and analysis of experiment results

  6. “Deliberate distortion of facts” and the problem of proving bias:

    African Journals Online (AJOL)

    user

    informed observer would reasonably perceive bias on the part of the officer .... represent an excellent illustration of what an Australian Chief Justice once .... the appellants prove that the Justice of Appeal who had no financial or other.

  7. Training Theory of Mind and Executive Control: A Tool for Improving School Achievement?

    Science.gov (United States)

    Kloo, Daniela; Perner, Josef

    2008-01-01

    In the preschool years, there are marked improvements in theory of mind (ToM) and executive functions. And, children's competence in these two core cognitive domains is associated with their academic achievement. Therefore, training ToM and executive control could be a valuable tool for improving children's success in school. This article reviews…

  8. Mango (Mangifera indica L.) by-products and their valuable components: a review.

    Science.gov (United States)

    Jahurul, M H A; Zaidul, I S M; Ghafoor, Kashif; Al-Juhaimi, Fahad Y; Nyam, Kar-Lin; Norulaini, N A N; Sahena, F; Mohd Omar, A K

    2015-09-15

    The large amount of waste produced by the food industries causes serious environmental problems and also results in economic losses if not utilized effectively. Different research reports have revealed that food industry by-products can be good sources of potentially valuable bioactive compounds. As such, the mango juice industry uses only the edible portions of the mangoes, and a considerable amount of peels and seeds are discarded as industrial waste. These mango by-products come from the tropical or subtropical fruit processing industries. Mango by-products, especially seeds and peels, are considered to be cheap sources of valuable food and nutraceutical ingredients. The main uses of natural food ingredients derived from mango by-products are presented and discussed, and the mainstream sectors of application for these by-products, such as in the food, pharmaceutical, nutraceutical and cosmetic industries, are highlighted. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. Proving test on the performance of a Multiple-Excitation Simulator

    International Nuclear Information System (INIS)

    Fujita, Katsuhisa; Ito, Tomohiro; Kojima, Nobuyuki; Sasaki, Yoichi; Abe, Hiroshi; Kuroda, Katsuhiko

    1995-01-01

    Seismic excitation test on large scale piping systems is scheduled to be carried out by the Nuclear power Engineering Corporation (NUPEC) using the large-scale, high-performance vibration table at the Tadotsu Engineering Laboratory, under the sponsorship of the Ministry of International Trade and Industry (MITI). In the test, the piping systems simulate the main steam piping system and the main feed water piping system in the nuclear power plants. In this study, a fundamental test was carried out to prove the performance of the Multiple Excitation Simulator which consists of the hydraulic actuator and the control system. An L-shaped piping system and a hydraulic actuator were installed on the shaking table. Acceleration and displacement generated by the actuator were measured. The performance of the actuator and the control system was discussed comparing the measured values and the target values on the time histories and the response spectrum of the acceleration. As a result, it was proved that the actuator and the control system have good performance and will be applicable to the verification test

  10. Proving the AGT relation for N f = 0, 1, 2 antifundamentals

    Science.gov (United States)

    Hadasz, Leszek; Jaskólski, Zbigniew; Suchanek, Paulina

    2010-06-01

    Using recursive relations satisfied by Nekrasov partition functions and by irregular conformal blocks we prove the AGT correspondence in the case of mathcal{N} = 2 superconformal SU(2) quiver gauge theories with N f = 0, 1, 2 antifundamental hypermultiplets.

  11. Seismicity map tools for earthquake studies

    Science.gov (United States)

    Boucouvalas, Anthony; Kaskebes, Athanasios; Tselikas, Nikos

    2014-05-01

    We report on the development of new and online set of tools for use within Google Maps, for earthquake research. We demonstrate this server based and online platform (developped with PHP, Javascript, MySQL) with the new tools using a database system with earthquake data. The platform allows us to carry out statistical and deterministic analysis on earthquake data use of Google Maps and plot various seismicity graphs. The tool box has been extended to draw on the map line segments, multiple straight lines horizontally and vertically as well as multiple circles, including geodesic lines. The application is demonstrated using localized seismic data from the geographic region of Greece as well as other global earthquake data. The application also offers regional segmentation (NxN) which allows the studying earthquake clustering, and earthquake cluster shift within the segments in space. The platform offers many filters such for plotting selected magnitude ranges or time periods. The plotting facility allows statistically based plots such as cumulative earthquake magnitude plots and earthquake magnitude histograms, calculation of 'b' etc. What is novel for the platform is the additional deterministic tools. Using the newly developed horizontal and vertical line and circle tools we have studied the spatial distribution trends of many earthquakes and we here show for the first time the link between Fibonacci Numbers and spatiotemporal location of some earthquakes. The new tools are valuable for examining visualizing trends in earthquake research as it allows calculation of statistics as well as deterministic precursors. We plan to show many new results based on our newly developed platform.

  12. Valuable metals - recovery processes, current trends, and recycling strategies

    Energy Technology Data Exchange (ETDEWEB)

    Froehlich, Peter; Lorenz, Tom; Martin, Gunther; Brett, Beate; Bertau, Martin [Institut fuer Technische Chemie, TU Bergakademie Freiberg, Leipziger Strasse 29, 09599, Freiberg (Germany)

    2017-03-01

    This Review provides an overview of valuable metals, the supply of which has been classified as critical for Europe. Starting with a description of the current state of the art, novel approaches for their recovery from primary resources are presented as well as recycling processes. The focus lies on developments since 2005. Chemistry strategies which are used in metal recovery are summarized on the basis of the individual types of deposit and mineral. In addition, the economic importance as well as utilization of the metals is outlined. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

  13. Extraction of toxic and valuable metals from foundry sands

    International Nuclear Information System (INIS)

    Vite T, J.

    1996-01-01

    There were extracted valuable metals from foundry sands such as: gold, platinum, silver, cobalt, germanium, nickel and zinc among others, as well as highly toxic metals such as chromium, lead, vanadium and arsenic. The extraction efficiency was up to 100% in some cases. For this reason there were obtained two patents at the United States, patent number 5,356,601, in October 1994, given for the developed process and patent number 5,376,000, in December 1994, obtained for the equipment employed. Therefore, the preliminary parameters for the installation of a pilot plant have also been developed. (Author)

  14. VALUABLE AND ORIENTATION FOUNDATIONS OF EDUCATIONAL SYSTEM OF THE COUNTRY

    OpenAIRE

    Vladimir I. Zagvyazinsky

    2016-01-01

    The aim of the investigation is to show that in modern market conditions it is necessary to keep humanistic valuable and orientation installations of domestic education and not to allow its slipping on a line item of utilitarian, quickly achievable, but not long-term benefits. Theoretical significance. The author emphasizes value of forming of an ideal – harmonious development of the personality – and the collectivist beginnings for disclosure of potential of each school student, a student, a...

  15. Development of High-Speed Switched Reluctance Motor for Electric Power Tools

    Science.gov (United States)

    Nakamura, Kenji; Kumasaka, Yuya; Ichinokura, Osamu

    2017-10-01

    This paper presents design and experimental evaluation of a switched reluctance (SR) motor used for electric power tools. First, characteristics of a previous designed 6/4-pole SR motor is shown and compared to a permanent magnet (PM) motor used in present electric power tools. Next, to further improve characteristics, a 12/8-pole SR motor is designed and evaluated in experiment. It is proved that the performance of the prototype 12/8-pole SR motor is almost comparable or superior to the present PM motor.

  16. Software Users Manual (SUM): Extended Testability Analysis (ETA) Tool

    Science.gov (United States)

    Maul, William A.; Fulton, Christopher E.

    2011-01-01

    This software user manual describes the implementation and use the Extended Testability Analysis (ETA) Tool. The ETA Tool is a software program that augments the analysis and reporting capabilities of a commercial-off-the-shelf (COTS) testability analysis software package called the Testability Engineering And Maintenance System (TEAMS) Designer. An initial diagnostic assessment is performed by the TEAMS Designer software using a qualitative, directed-graph model of the system being analyzed. The ETA Tool utilizes system design information captured within the diagnostic model and testability analysis output from the TEAMS Designer software to create a series of six reports for various system engineering needs. The ETA Tool allows the user to perform additional studies on the testability analysis results by determining the detection sensitivity to the loss of certain sensors or tests. The ETA Tool was developed to support design and development of the NASA Ares I Crew Launch Vehicle. The diagnostic analysis provided by the ETA Tool was proven to be valuable system engineering output that provided consistency in the verification of system engineering requirements. This software user manual provides a description of each output report generated by the ETA Tool. The manual also describes the example diagnostic model and supporting documentation - also provided with the ETA Tool software release package - that were used to generate the reports presented in the manual

  17. Facebook as an Online Teaching Tool: Effects on Student Participation, Learning, and Overall Course Performance

    Science.gov (United States)

    Camus, Melinda; Hurt, Nicole E.; Larson, Lincoln R.; Prevost, Luanna

    2016-01-01

    Online discussions are widely viewed as a valuable tool for encouraging student engagement and promoting interaction with course material outside of the traditional classroom. Strategies for conducting online discussions vary and are not confined to traditional, university-sponsored learning management systems (LMS). Social media platforms such as…

  18. Intratibial injection of human multiple myeloma cells in NOD/SCID IL-2Rγ(null mice mimics human myeloma and serves as a valuable tool for the development of anticancer strategies.

    Directory of Open Access Journals (Sweden)

    Julia Schueler

    Full Text Available BACKGROUND: We systematically analyzed multiple myeloma (MM cell lines and patient bone marrow cells for their engraftment capacity in immunodeficient mice and validated the response of the resulting xenografts to antimyeloma agents. DESIGN AND METHODS: Using flow cytometry and near infrared fluorescence in-vivo-imaging, growth kinetics of MM cell lines L363 and RPMI8226 and patient bone marrow cells were investigated with use of a murine subcutaneous bone implant, intratibial and intravenous approach in NOD/SCID, NOD/SCID treated with CD122 antibody and NOD/SCID IL-2Rγ(null mice (NSG. RESULTS: Myeloma growth was significantly increased in the absence of natural killer cell activity (NSG or αCD122-treated NOD/SCID. Comparison of NSG and αCD122-treated NOD/SCID revealed enhanced growth kinetics in the former, especially with respect to metastatic tumor sites which were exclusively observed therein. In NSG, MM cells were more tumorigenic when injected intratibially than intravenously. In NOD/SCID in contrast, the use of juvenile long bone implants was superior to intratibial or intravenous cancer cell injection. Using the intratibial NSG model, mice developed typical disease symptoms exclusively when implanted with human MM cell lines or patient-derived bone marrow cells, but not with healthy bone marrow cells nor in mock-injected animals. Bortezomib and dexamethasone delayed myeloma progression in L363- as well as patient-derived MM cell bearing NSG. Antitumor activity could be quantified via flow cytometry and in vivo imaging analyses. CONCLUSIONS: Our results suggest that the intratibial NSG MM model mimics the clinical situation of the disseminated disease and serves as a valuable tool in the development of novel anticancer strategies.

  19. SpecSatisfiabilityTool: A tool for testing the satisfiability of specifications on XML documents

    Directory of Open Access Journals (Sweden)

    Javier Albors

    2015-01-01

    Full Text Available We present a prototype that implements a set of logical rules to prove the satisfiability for a class of specifications on XML documents. Specifications are given by means of constrains built on Boolean XPath patterns. The main goal of this tool is to test whether a given specification is satisfiable or not, and justify the decision showing the execution history. It can also be used to test whether a given document is a model of a given specification and, as a by-product, it permits to look for all the relations (monomorphisms between two patterns and to combine patterns in different ways. The results of these operations are visually shown and therefore the tool makes these operations more understandable. The implementation of the algorithm has been written in Prolog but the prototype has a Java interface for an easy and friendly use. In this paper we show how to use this interface in order to test all the desired properties.

  20. Logic for computer science foundations of automatic theorem proving

    CERN Document Server

    Gallier, Jean H

    2015-01-01

    This advanced text for undergraduate and graduate students introduces mathematical logic with an emphasis on proof theory and procedures for algorithmic construction of formal proofs. The self-contained treatment is also useful for computer scientists and mathematically inclined readers interested in the formalization of proofs and basics of automatic theorem proving. Topics include propositional logic and its resolution, first-order logic, Gentzen's cut elimination theorem and applications, and Gentzen's sharpened Hauptsatz and Herbrand's theorem. Additional subjects include resolution in fir

  1. E-squared nine do-it-yourself energy experiments that prove your thoughts create your reality

    CERN Document Server

    Grout, Pam

    2013-01-01

    E-Squared is a lab manual with simple experiments to prove once and for all that there really is a good, loving, totally hip force in the universe. Rather than take it on faith, you are invited to conduct ten 48-hour experiments to prove each of the principles in this book. Yes, you read that right. It says prove. The experiments, each of which can be conducted with absolutely no money and very little time expenditure, demonstrate that spiritual principles are as dependable as gravity, as consistent as Newton's 2nd law of motion. For years, you've been hoping and praying that spiritual principles are true. Now, you can know.

  2. Using eternity variables to specify and prove a serializable database interface

    NARCIS (Netherlands)

    Hesselink, Wim H.

    Eternity variables are introduced to specify and verify serializability of transactions of a distributed database. Eternity variables are a new kind of auxiliary variables. They do not occur in the implementation but are used in specification and verification. Elsewhere it has been proved that

  3. Automatically Proving Termination and Memory Safety for Programs with Pointer Arithmetic

    DEFF Research Database (Denmark)

    Ströder, Thomas; Giesl, Jürgen; Brockschmidt, Marc

    2017-01-01

    While automated verification of imperative programs has been studied intensively, proving termination of programs with explicit pointer arithmetic fully automatically was still an open problem. To close this gap, we introduce a novel abstract domain that can track allocated memory in detail. We use...

  4. Diagnosis demystified: CT as diagnostic tool in endodontics

    Science.gov (United States)

    Shruthi, Nagaraja; Sreenivasa Murthy, B V; Sundaresh, K J; Mallikarjuna, Rachappa

    2013-01-01

    Diagnosis in endodontics is usually based on clinical and radiographical presentations, which are only empirical methods. The role of healing profession is to apply knowledge and skills towards maintaining and restoring the patient's health. Recent advances in imaging technologies have added to correct interpretation and diagnosis. CT is proving to be an effective tool in solving endodontic mysteries through its three-dimensional visualisation. CT imaging offers many diagnostic advantages to produce reconstructed images in selected projection and low-contrast resolution far superior to that of all other X-ray imaging modalities. This case report is an endeavour towards effective treatment planning of cases with root fracture, root resorption using spiral CT as an adjuvant diagnostic tool. PMID:23814212

  5. On the mechanism of photocatalytic reactions with eosin Y

    OpenAIRE

    Majek, Michal; Filace, Fabiana; von Wangelin, Axel Jacobi

    2014-01-01

    Summary A combined spectroscopic, synthetic, and apparative study has allowed a more detailed mechanistic rationalization of several recently reported eosin Y-catalyzed aromatic substitutions at arenediazonium salts. The operation of rapid acid–base equilibria, direct photolysis pathways, and radical chain reactions has been discussed on the basis of pH, solvent polarity, lamp type, absorption properties, and quantum yields. Determination of the latter proved to be an especially valuable tool...

  6. Animated Reconstruction of Forensic Animation

    OpenAIRE

    Hala, Albert; Unver, Ertu

    1998-01-01

    An animated accident display in court can be significant evidentiary tool. Computer graphics animation reconstructions which can be shown in court are cost effective, save valuable time and illustrate complex and technical issues, are realistic and can prove or disprove arguments or theories with reference to the perplexing newtonian physics involved in many accidents: this technology may well revolutionise accident reconstruction, thus enabling prosecution and defence to be more effective in...

  7. Grit blasting nozzle fabricated from mild tool steel proves satisfactory

    Science.gov (United States)

    Mc Farland, J. E.; Turbitt, B.

    1966-01-01

    Dry blasting with glass beads through a nozzle assembly descales both the outside and inside surfaces of tubes of Inconel 718 used for the distribution of gaseous oxygen. The inside of the nozzle is coated with polyurethane and the deflector with a commercially available liquid urethane rubber.

  8. Augmented Reality-Based Simulators as Discovery Learning Tools: An Empirical Study

    Science.gov (United States)

    Ibáñez, María-Blanca; Di-Serio, Ángela; Villarán-Molina, Diego; Delgado-Kloos, Carlos

    2015-01-01

    This paper reports empirical evidence on having students use AR-SaBEr, a simulation tool based on augmented reality (AR), to discover the basic principles of electricity through a series of experiments. AR-SaBEr was enhanced with knowledge-based support and inquiry-based scaffolding mechanisms, which proved useful for discovery learning in…

  9. CORRELATION LINKS BETWEEN SOME ECONOMICALLY VALUABLE SIGNS IN BROCCOLI

    Directory of Open Access Journals (Sweden)

    E. A. Zablotskaya

    2018-01-01

    Full Text Available The study of the correlation relationship between the signs, the informativeness of the indicators makes it possible to conduct a preliminary assessment of the plants and more objectively to identify forms with high economically valuable characteristics. Their integrated assessment will identify the best source material for further selection. In literary sources, information on the correlation in broccoli between yields and its elements are not the same. The purpose of our study was to analyze the contingency of various traits and to identify significant correlation links between quantitative traits in broccoli hybrids (42 samples. They were obtained using doubled haploid lines (DH-line of early maturity at 2 planting dates (spring and summer. Studies were conducted in the Odintsovo district of the Moscow region in field experience in 2015, 2016. Significant influence on growth and development was provided by the developing weather conditions during the growing period. The fluctuation of humidification and temperature conditions differed significantly during the years of study and the time of planting, which is an important circumstance for analyzing the data obtained. Based on the results of the research, it was concluded that the value of the correlation coefficient and the strength of the correlation relationship between the characteristics (mass, diameter, head height, plant height, vegetation period are different and depend on the set of test specimens and growing conditions. A significant stable manifestation of positive correlation was revealed during all the years of research and the time of planting between the diameter and mass of the head (r = 0.45-0.96. The variability of the correlation of other economically valuable traits is marked. 

  10. Technical report on the Piping Reliability Proving Tests at the Japan Atomic Energy Research Institute

    International Nuclear Information System (INIS)

    1993-05-01

    Japan Atomic Energy Research Institute (JAERI) conducts Piping Reliability Proving Tests from 1975 to 1992 based upon the contracts between JAERI and Science and Technology Agency of Japan (STA) under the auspices of the special account law for electric power development promotion. The purpose of these tests are to prove the structural reliability of the primary cooling piping constituting a part of the pressure boundary in the light water reactor power plants. The tests with large experimental facilities had ended already in 1990. Presently piping reliability analysis by the probabilistic fracture mechanics method is being done. Until now annual reports concerning the proving tests were produced and submitted to STA, whereas this report summarizes the test results done during these 16 years. Objectives of the piping reliability proving tests are to prove that the primary piping of the light water reactor (1) be reliable throughout the service period, (2) have no possibility of rupture, (3) bring no detrimental influence on the surrounding instrumentations or equipments near the break location even if it ruptured suddenly. To attain these objectives (i) pipe fatigue tests, (ii) unstable pipe fracture tests, (iii) pipe rupture tests and also the analyses by computer codes were done. After carrying out these tests, it is verified that the piping is reliable throughout the service period. The authors of this report are T. Isozaki, K. Shibata, S. Ueda, R. Kurihara, K. Onizawa and A. Kohsaka. The parts they wrote are shown in contents. (author)

  11. [Psychopathology and film: a valuable interaction?].

    Science.gov (United States)

    van Duppen, Z; Summa, M; Fuchs, T

    2015-01-01

    Film or film fragments are often used in psychopathology education. However, so far there have been very few articles that have discussed the benefits and limitations of using films to explain or illustrate psychopathology. Although numerous films involves psychopathology in varying degrees, it is not clear how we can use films for psychopathology education. To examine the advantages, limitations and possible methods of using film as a means of increasing our knowledge and understanding of psychiatric illnesses. We discuss five examples that illustrate the interaction of film and psychopathology. On the one hand we explain how the psychopathological concepts are used in each film and on the other hand we explain which aspects of each film are valuable aids for teaching psychopathology. The use of film makes it possible to introduce the following topics in psychopathological teaching programme: holistic psychiatric reasoning, phenomenology and the subjective experience, the recognition of psychopathological prototypes and the importance of context. There is undoubtedly an analogy between the method we have chosen for teaching psychopathology with the help of films and the holistic approach of the psychiatrist and his or her team. We believe psychopathology education can benefit from films and we would recommend our colleagues to use it in this way.

  12. Machine tool metrology an industrial handbook

    CERN Document Server

    Smith, Graham T

    2016-01-01

    Maximizing reader insights into the key scientific disciplines of Machine Tool Metrology, this text will prove useful for the industrial-practitioner and those interested in the operation of machine tools. Within this current level of industrial-content, this book incorporates significant usage of the existing published literature and valid information obtained from a wide-spectrum of manufacturers of plant, equipment and instrumentation before putting forward novel ideas and methodologies. Providing easy to understand bullet points and lucid descriptions of metrological and calibration subjects, this book aids reader understanding of the topics discussed whilst adding a voluminous-amount of footnotes utilised throughout all of the chapters, which adds some additional detail to the subject. Featuring an extensive amount of photographic-support, this book will serve as a key reference text for all those involved in the field. .

  13. 76 FR 50771 - Submission for Review: RI 25-37, Evidence To Prove Dependency of a Child, 3206-0206

    Science.gov (United States)

    2011-08-16

    ... OFFICE OF PERSONNEL MANAGEMENT Submission for Review: RI 25-37, Evidence To Prove Dependency of a...) 3206-0206, Evidence to Prove Dependency of a Child. As required by the Paperwork Reduction Act of 1995... or faxed to (202) 395-6974. SUPPLEMENTARY INFORMATION: Evidence to Prove Dependency of a Child is...

  14. A field guide to valuable underwater aquatic plants of the Great Lakes

    Science.gov (United States)

    Schloesser, Donald W.

    1986-01-01

    Underwater plants are a valuable part of the Great Lakes ecosystem, providing food and shelter for aquatic animals. Aquatic plants also help stabilize sediments, thereby reducing shoreline erosion. Annual fall die-offs of underwater plants provide food and shelter for overwintering small aquatic animals such as insects, snails, and freshwater shrimp.

  15. Origin of choriocarcinoma in previous molar pregnancy proved by DNA analysis

    International Nuclear Information System (INIS)

    Vojtassak, J.; Repiska, V.; Konecna, B.; Zajac, V.; Korbel, M.; Danihel, L.

    1996-01-01

    A 17-year old woman had in a short time period (seven months) a very exciting reproduction history. Molar pregnancy in December 1993, choriocarcinoma in January 1994 and induced abortion in June 1994. DNA analysis proved the origin of the choriocarcinoma in the previous molar pregnancy. (author)

  16. Effect of Acid Dissolution Conditions on Recovery of Valuable Metals from Used Plasma Display Panel Scrap

    Directory of Open Access Journals (Sweden)

    Kim Chan-Mi

    2017-06-01

    Full Text Available The objective of this particular study was to recover valuable metals from waste plasma display panels using high energy ball milling with subsequent acid dissolution. Dissolution of milled (PDP powder was studied in HCl, HNO3, and H2SO4 acidic solutions. The effects of dissolution acid, temperature, time, and PDP scrap powder to acid ratio on the leaching process were investigated and the most favorable conditions were found: (1 valuable metals (In, Ag, Mg were recovered from PDP powder in a mixture of concentrated hydrochloric acid (HCl:H2O = 50:50; (2 the optimal dissolution temperature and time for the valuable metals were found to be 60°C and 30 min, respectively; (3 the ideal PDP scrap powder to acid solution ratio was found to be 1:10. The proposed method was applied to the recovery of magnesium, silver, and indium with satisfactory results.

  17. DNA Microarrays: a Powerful Genomic Tool for Biomedical and Clinical Research

    OpenAIRE

    Trevino, Victor; Falciani, Francesco; Barrera-Saldaña, Hugo A

    2007-01-01

    Among the many benefits of the Human Genome Project are new and powerful tools such as the genome-wide hybridization devices referred to as microarrays. Initially designed to measure gene transcriptional levels, microarray technologies are now used for comparing other genome features among individuals and their tissues and cells. Results provide valuable information on disease subcategories, disease prognosis, and treatment outcome. Likewise, they reveal differences in genetic makeup, regulat...

  18. The Inquiry Matrix: A Tool for Assessing and Planning Inquiry in Biology and Beyond

    Science.gov (United States)

    Grady, Julie

    2010-01-01

    One way to advance inquiry in the classroom is to establish a systematic strategy for reflecting on our practice and our students' readiness to engage in increasingly complex scientific reasoning. The Matrix for Assessing and Planning Scientific Inquiry (MAPSI) is a tool that promotes this valuable reflection so that we, as teachers, are better…

  19. Successful business process design. Business plan development for the occupational health services unit.

    Science.gov (United States)

    Kalina, C M; Fitko, J

    1997-02-01

    1. The occupational health nurse is often mandated by management to validate health services offered and programs developed for employees as valuable to the business and company mission. 2. The business plan of the occupational health service is a working document, changing as needs of the client/customer and internal and external business and socio-economic environment evolve. 3. Alignment with and support of the company mission, goals, and objectives is another method of proving good occupational health is good business. 4. Business planning is a basic business tool the wise and prudent occupational health nurse can use in proving good occupational health is vital to the success of a company.

  20. PCR-RFLP as a useful tool for diagnosis of invasive mycoses in a healthcare facility in the North of Brazil

    Directory of Open Access Journals (Sweden)

    Diego Rayan Teixeira de Sousa

    2015-05-01

    Conclusion: The results showed that PCR-RFLP is a valuable tool for the identification of invasive mycoses that can be implemented in hospital laboratories, allowing for a high number of clinical analyses per day.

  1. Social Media: Valuable Tools in Today’s Operational Environment

    Science.gov (United States)

    2011-05-04

    Lee Odden, ―Best and Worst Practices Social Media Marketing,‖ Top Rank® Online Market Blog, entry posted 12 February 2009, http://www.toprankblog.com...1001 (accessed 30 March 2011). Odden, Lee. ―Best and Worst Practices Social Media Marketing.‖ Top Rank® Online Market Blog, entry posted 12

  2. High pleural fluid adenosine deaminase levels: A valuable tool for ...

    African Journals Online (AJOL)

    To determine the positive predictive value (PPV) of FADA, the frequent causes of FPs in our laboratory and the demographic characteristics of tuberculous pleural effusions (TPEs) and non-tuberculous pleural effusions (NTPEs). Methods. High FADA results generated in the past year were extracted with corresponding TB ...

  3. Mathematical Understanding and Proving Abilities: Experiment With Undergraduate Student By Using Modified Moore Learning Approach

    Directory of Open Access Journals (Sweden)

    Rippi Maya

    2011-07-01

    Full Text Available This paper reports findings of  a  post test experimental control group design conducted to investigate the role of modified Moore learning approach  on improving students’ mathematical understanding and proving abilities. Subject of study were 56 undergradute students of one state university in Bandung, who took advanced abstract algebra course. Instrument of study were a set test of mathematical understanding ability, a set test of mathematical proving ability, and a set of students’ opinion scale on modified Moore learning approach. Data were analyzed by using two path ANOVA. The study found that proof construction process was more difficult than mathematical understanding  task  for all students, and students still posed some difficulties on constructing mathematical proof task.  The study also found there were not differences  between students’  abilities on mathematical understanding and on proving abilities of  the both classes, and both abilities were classified as mediocre. However, in modified Moore learning approach class there were more students who got above average grades on mathematical understanding than those of conventional class. Moreover, students performed positive  opinion toward  modified Moore learning approach. They  were  active in questioning and solving problems, and in explaining their works in front of class as well, while students of conventional teaching prefered to listen to lecturer’s explanation. The study also found that there was no interaction between learning approach and students’ prior mathematics ability on mathematical understanding and proving abilities,  but  there were  quite strong  association between students’ mathematical understanding and proving abilities.Keywords:  modified Moore learning approach, mathematical understanding ability, mathematical proving ability. DOI: http://dx.doi.org/10.22342/jme.2.2.751.231-250

  4. Attitudes of Entrepreneurs Towards Social Media as a Marketing Tool

    OpenAIRE

    Barišić, Anton Florijan; Vujnović, Krunoslav

    2018-01-01

    Rapid development of technologies has led to emergence of new opportunities for businesses such as social media. Online social networks and media are well recognized and increasingly used by businesses as valuable source of information regarding the design, acceptance and use of their products and services, and also as important marketing tool to reach diverse groups of customers that had not been covered earlier by their marketing campaigns. The purpose of this paper was to research the low ...

  5. Tracking Change in rapid and eXtreme Development: A Challenge to SCM-tools?

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak

    2001-01-01

    Software configuration management (SCM) has proved to be an invaluable part of developing and maintaining high quality software. The benefits are not for free however: SCM tool operations often divert your attention from your development task, sometimes you have to endure a long waiting time whil...

  6. Proof and Proving: Logic, Impasses, and the Relationship to Problem Solving

    Science.gov (United States)

    Savic, Milos

    2012-01-01

    Becoming a skillful prover is critical for success in advanced undergraduate and graduate mathematics courses. In this dissertation, I report my investigations of proof and the proving process in three separate studies. In the first study, I examined the amount of logic used in student-constructed proofs to help in the design of…

  7. Using Psychodynamic Interaction as a Valuable Source of Information in Social Research

    DEFF Research Database (Denmark)

    Schmidt, Camilla

    2012-01-01

    This article will address the issue of using understandings of psychodynamic interrelations as a means to grasp how social and cultural dynamics are processed individually and collectively in narratives. I apply the two theoretically distinct concepts of inter- and intrasubjectivity to gain insight...... are valuable sources of information in understanding the process of becoming a social educator....

  8. Long-term fate of depleted uranium at Aberdeen and Yuma Proving Grounds: Human health and ecological risk assessments

    Energy Technology Data Exchange (ETDEWEB)

    Ebinger, M.H.; Beckman, R.J.; Myers, O.B. [Los Alamos National Lab., NM (United States); Kennedy, P.L.; Clements, W.; Bestgen, H.T. [Colorado State Univ., Ft. Collins, CO (United States). Dept. of Fishery and Wildlife Biology

    1996-09-01

    The purpose of this study was to evaluate the immediate and long-term consequences of depleted uranium (DU) in the environment at Aberdeen Proving Ground (APG) and Yuma Proving Ground (YPG) for the Test and Evaluation Command (TECOM) of the US Army. Specifically, we examined the potential for adverse radiological and toxicological effects to humans and ecosystems caused by exposure to DU at both installations. We developed contaminant transport models of aquatic and terrestrial ecosystems at APG and terrestrial ecosystems at YPG to assess potential adverse effects from DU exposure. Sensitivity and uncertainty analyses of the initial models showed the portions of the models that most influenced predicted DU concentrations, and the results of the sensitivity analyses were fundamental tools in designing field sampling campaigns at both installations. Results of uranium (U) isotope analyses of field samples provided data to evaluate the source of U in the environment and the toxicological and radiological doses to different ecosystem components and to humans. Probabilistic doses were estimated from the field data, and DU was identified in several components of the food chain at APG and YPG. Dose estimates from APG data indicated that U or DU uptake was insufficient to cause adverse toxicological or radiological effects. Dose estimates from YPG data indicated that U or DU uptake is insufficient to cause radiological effects in ecosystem components or in humans, but toxicological effects in small mammals (e.g., kangaroo rats and pocket mice) may occur from U or DU ingestion. The results of this study were used to modify environmental radiation monitoring plans at APG and YPG to ensure collection of adequate data for ongoing ecological and human health risk assessments.

  9. Long-term fate of depleted uranium at Aberdeen and Yuma Proving Grounds: Human health and ecological risk assessments

    International Nuclear Information System (INIS)

    Ebinger, M.H.; Beckman, R.J.; Myers, O.B.; Kennedy, P.L.; Clements, W.; Bestgen, H.T.

    1996-09-01

    The purpose of this study was to evaluate the immediate and long-term consequences of depleted uranium (DU) in the environment at Aberdeen Proving Ground (APG) and Yuma Proving Ground (YPG) for the Test and Evaluation Command (TECOM) of the US Army. Specifically, we examined the potential for adverse radiological and toxicological effects to humans and ecosystems caused by exposure to DU at both installations. We developed contaminant transport models of aquatic and terrestrial ecosystems at APG and terrestrial ecosystems at YPG to assess potential adverse effects from DU exposure. Sensitivity and uncertainty analyses of the initial models showed the portions of the models that most influenced predicted DU concentrations, and the results of the sensitivity analyses were fundamental tools in designing field sampling campaigns at both installations. Results of uranium (U) isotope analyses of field samples provided data to evaluate the source of U in the environment and the toxicological and radiological doses to different ecosystem components and to humans. Probabilistic doses were estimated from the field data, and DU was identified in several components of the food chain at APG and YPG. Dose estimates from APG data indicated that U or DU uptake was insufficient to cause adverse toxicological or radiological effects. Dose estimates from YPG data indicated that U or DU uptake is insufficient to cause radiological effects in ecosystem components or in humans, but toxicological effects in small mammals (e.g., kangaroo rats and pocket mice) may occur from U or DU ingestion. The results of this study were used to modify environmental radiation monitoring plans at APG and YPG to ensure collection of adequate data for ongoing ecological and human health risk assessments

  10. Three novel software tools for ASDEX Upgrade

    International Nuclear Information System (INIS)

    Martinov, S.; Löbhard, T.; Lunt, T.; Behler, K.; Drube, R.; Eixenberger, H.; Herrmann, A.; Lohs, A.; Lüddecke, K.; Merkel, R.; Neu, G.; ASDEX Upgrade Team; MPCDF Garching

    2016-01-01

    Highlights: • Key features of innovative software tools for data visualization and inspection are presented to the nuclear fusion research community. • 3D animation of experiment geometry together with diagnostic data and images allow better understanding of measurements and influence of machine construction details behind them. • Multi-video viewer with fusion relevant image manipulation abilities and event database features allows faster and better decision making from video streams coming from various plasma and machine diagnostics. • Platform independant Web technologies enable the inspection of diagnostic raw signals with virtually any kind of display device. - Abstract: Visualization of measurements together with experimental settings is a general subject in experiments analysis. The complex engineering design, 3D geometry, and manifold of diagnostics in larger fusion research experiments justify the development of special analysis and visualization programs. Novel ASDEX Upgrade (AUG) software tools bring together virtual navigation through 3D device models and advanced play-back and interpretation of video streams from plasma discharges. A third little tool allows the web-based platform independent observation of real-time diagnostic signals. While all three tools stem from spontaneous development ideas and are not considered mission critical for the operation of a fusion device, they with time and growing completeness shaped up as valuable helpers to visualize acquired data in fusion research. A short overview on the goals, the features, and the design as well as the operation of these tools is given in this paper.

  11. Three novel software tools for ASDEX Upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Martinov, S. [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85748 Garching bei München (Germany); Löbhard, T. [Conovum GmbH & Co. KG, Nymphenburger Straße 13, D-80335 München (Germany); Lunt, T. [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85748 Garching bei München (Germany); Behler, K., E-mail: karl.behler@ipp.mpg.de [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85748 Garching bei München (Germany); Drube, R.; Eixenberger, H.; Herrmann, A.; Lohs, A. [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85748 Garching bei München (Germany); Lüddecke, K. [Unlimited Computer Systems GmbH, Seeshaupterstr. 15, D-82393 Iffeldorf (Germany); Merkel, R.; Neu, G.; ASDEX Upgrade Team [Max-Planck-Institut für Plasmaphysik, Boltzmannstr. 2, D-85748 Garching bei München (Germany); MPCDF Garching [Max Planck Compu ting and Data Facility, Boltzmannstr. 2, D-85748 Garching (Germany)

    2016-11-15

    Highlights: • Key features of innovative software tools for data visualization and inspection are presented to the nuclear fusion research community. • 3D animation of experiment geometry together with diagnostic data and images allow better understanding of measurements and influence of machine construction details behind them. • Multi-video viewer with fusion relevant image manipulation abilities and event database features allows faster and better decision making from video streams coming from various plasma and machine diagnostics. • Platform independant Web technologies enable the inspection of diagnostic raw signals with virtually any kind of display device. - Abstract: Visualization of measurements together with experimental settings is a general subject in experiments analysis. The complex engineering design, 3D geometry, and manifold of diagnostics in larger fusion research experiments justify the development of special analysis and visualization programs. Novel ASDEX Upgrade (AUG) software tools bring together virtual navigation through 3D device models and advanced play-back and interpretation of video streams from plasma discharges. A third little tool allows the web-based platform independent observation of real-time diagnostic signals. While all three tools stem from spontaneous development ideas and are not considered mission critical for the operation of a fusion device, they with time and growing completeness shaped up as valuable helpers to visualize acquired data in fusion research. A short overview on the goals, the features, and the design as well as the operation of these tools is given in this paper.

  12. Photons in a partonic transport approach

    Energy Technology Data Exchange (ETDEWEB)

    Greif, Moritz; Senzel, Florian; Greiner, Carsten [Goethe Universitaet Frankfurt, Max-von-Laue-Str. 1 60438 Frankfurt am Main (Germany)

    2015-07-01

    Partonic transport approaches have proved to be valuable tools in describing the quark-gluon plasma, created in heavy-ion collisions. In this work, first steps towards a dynamical understanding of photonproduction in expanding heavy-ion collisions are presented. Several photon production processes are included in the partonic cascade BAMPS (Boltzmann Approach to Multi-Parton Scatterings). BAMPS provides a microscopic tool to study expanding fireballs, employing a stochastic method to solve the relativistic 3+1d Boltzmann equation. Subsequently, photon spectra can be investigated, and in particular, the influence of the quark-gluon plasma phase for the elliptic flow of photons is studied.

  13. 76 FR 22938 - Submission for Review: RI 25-37, Evidence To Prove Dependency of a Child

    Science.gov (United States)

    2011-04-25

    ... OFFICE OF PERSONNEL MANAGEMENT Submission for Review: RI 25-37, Evidence To Prove Dependency of a..., Evidence to Prove Dependency of a Child. As required by the Paperwork Reduction Act of 1995 (Pub. L. 104-13... Dependency of a Child, is designed to collect sufficient information for the Office of Personnel Management...

  14. Measuring and monitoring energy access: Decision-support tools for policymakers in Africa

    International Nuclear Information System (INIS)

    Hailu, Yohannes G.

    2012-01-01

    A significant number of African States have adapted energy access targets. In evaluating progress towards these goals, measuring and monitoring energy access becomes relevant. This paper reviews energy access indicators and identifies their utility and challenges in their application. By focusing on Africa, a broader framework for energy access measurement and monitoring is discussed, along with implementation barriers and potential solutions. To demonstrate the utility of energy access decision-support tool in Africa, a scenario analysis in five regional energy pools is conducted using the Energy Spending Model tool. Institutionalizing monitoring and decision-support tools can provide valuable feedback to policymakers aiming to design and implement effective energy access programs serving a growing population in Africa. - Highlights: ► Most African countries have adapted energy access targets. ► To monitor and evaluate performance, monitoring and decision-support tools are required. ► Framework for tool development should consider data, cost, political and other factors. ► Implementation constraints include technical, data, resource and urban/rural issues. ► Electricity Spending Needs model is one decision support tool that ties access targets to investment needs. ► Monitoring tools provide crucial feedback on Africa's energy access progress.

  15. Anomaly detection using magnetic flux leakage technology

    Energy Technology Data Exchange (ETDEWEB)

    Rempel, Raymond G. [BJ Pipeline Inspection Services, Alberta (Canada)

    2005-07-01

    There are many aspects to properly assessing the integrity of a pipeline. In-line-Inspection (ILI) tools, in particular those that employ the advanced use of Magnetic Flux Leakage (MFL) technology, provide a valuable means of achieving required up-to-date knowledge of a pipeline. More prevalent use of High Resolution MFL In-Line-Inspection tools is growing the knowledge base that leads to more reliable and accurate identification of anomalies in a pipeline, thus, minimizing the need for expensive verification excavations. Accurate assessment of pipeline anomalies can improve the decision making process within an Integrity Management Program and excavation programs can then focus on required repairs instead of calibration or exploratory digs. Utilizing the information from an MFL ILI inspection is not only cost effective but, as well, can also prove to be an extremely valuable building block of a Pipeline Integrity Management Program. (author)

  16. New Insights into the Evolution of the Human Diet from Faecal Biomarker Analysis in Wild Chimpanzee and Gorilla Faeces

    OpenAIRE

    Sistiaga, Ainara; Wrangham, Richard; Rothman, Jessica M.; Summons, Roger E.

    2015-01-01

    Our understanding of early human diets is based on reconstructed biomechanics of hominin jaws, bone and teeth isotopic data, tooth wear patterns, lithic, taphonomic and zooarchaeological data, which do not provide information about the relative amounts of different types of foods that contributed most to early human diets. Faecal biomarkers are proving to be a valuable tool in identifying relative proportions of plant and animal tissues in Palaeolithic diets. A limiting factor in the applicat...

  17. Formal Analysis of Soft Errors using Theorem Proving

    Directory of Open Access Journals (Sweden)

    Sofiène Tahar

    2013-07-01

    Full Text Available Modeling and analysis of soft errors in electronic circuits has traditionally been done using computer simulations. Computer simulations cannot guarantee correctness of analysis because they utilize approximate real number representations and pseudo random numbers in the analysis and thus are not well suited for analyzing safety-critical applications. In this paper, we present a higher-order logic theorem proving based method for modeling and analysis of soft errors in electronic circuits. Our developed infrastructure includes formalized continuous random variable pairs, their Cumulative Distribution Function (CDF properties and independent standard uniform and Gaussian random variables. We illustrate the usefulness of our approach by modeling and analyzing soft errors in commonly used dynamic random access memory sense amplifier circuits.

  18. Afghanistan, history and beyond - GIS based application tool

    Science.gov (United States)

    Swamy, Rahul Chidananda

    The emphasis of this tool is to provide an insight into the history of Afghanistan. Afghanistan has been a warring nation for decades; this tool provides a brief account of the reasons behind the importance of Afghanistan, which led to its invasion by Britain, Russia and USA. The timeline for this thesis was set from 1879 to 1990 which ranges from Barakzai Dynasty to the soviet invasion. Maps are used judiciously to show battles during the British invasion. Maps that show roads, rivers, lakes and provinces are incorporated into the tool to provide an overview of the present situation. The user has options to filter this data by using the timeline and a filtering tool. To quench the users thirst for more information, HTML pages are used judiciously. HTML pages are embedded in key events to provide detailed insight into these events with the help of pictures and videos. An intuitive slider is used to show the people who played a significant role in Afghanistan. The user interface was made intuitive and easy to use, keeping in mind the novice user. A help menu is provided to guide the user on the tool. Spending time researching about Afghanistan has helped me again a new perspective on Afghanistan and its people. With this tool, I hope I can provide a valuable channel for people to understand Afghanistan and gain a fresh perspective into this war ridden nation.

  19. Paper Tools and Periodic Tables: Newlands and Mendeleev Draw Grids.

    Science.gov (United States)

    Gordin, Michael D

    2018-02-01

    This essay elaborates on Ursula Klein's methodological concept of "paper tools" by drawing on several examples from the history of the periodic table. Moving from John A. R. Newlands's "Law of Octaves," to Dmitrii Mendeleev's first drafts of his periodic system in 1869, to Mendeleev's chemical speculations on the place of the ether within his classification, one sees that the ways in which the scientists presented the balance between empirical data and theoretical manipulation proved crucial for the chemical community's acceptance or rejection of their proposed innovations. This negotiated balance illustrates an underemphasised feature of Klein's conceptualisation of the ways in which a paper tool generates new knowledge.

  20. Proving Test on the Reliability for Reactor Containment Vessel

    International Nuclear Information System (INIS)

    Takumi, K.; Nonaka, A.

    1988-01-01

    NUPEC (Nuclear Power Engineering Test Center) has started an eight-year project of Proving Test on the Reliability for Reactor Containment Vessel since June 1987. The objective of this project is to confirm the integrity of containment vessels under severe accident conditions. This paper shows the outline of this project. The test Items are (1) Hydrogen mixing and distribution test, (2) Hydrogen burning test, (3) Iodine trapping characteristics test, and (4) Structural behavior test. Based on the test results, computer codes are verified and as the results of analysis and evaluation by the computer codes, containment integrity is to be confirmed

  1. On proving confluence modulo equivalence for Constraint Handling Rules

    DEFF Research Database (Denmark)

    Christiansen, Henning; Kirkeby, Maja Hanne

    2017-01-01

    -logical built-in predicates such as var/1 and incomplete ones such as is/2, that are ignored in previous work on confluence. To this end, a new operational semantics for CHR is developed which includes such predicates. In addition, this semantics differs from earlier approaches by its simplicity without loss......Previous results on proving confluence for Constraint Handling Rules are extended in two ways in order to allow a larger and more realistic class of CHR programs to be considered confluent. Firstly, we introduce the relaxed notion of confluence modulo equivalence into the context of CHR: while...

  2. PROVE Land Cover and Leaf Area of Jornada Experimental Range, New Mexico, 1997

    Data.gov (United States)

    National Aeronautics and Space Administration — ABSTRACT: Field measurement of shrubland ecological properties is important for both site monitoring and validation of remote-sensing information. During the PROVE...

  3. Identity as an Analytical Tool to Explore Students’ Mathematical Writing

    DEFF Research Database (Denmark)

    Iversen, Steffen Møllegaard

    Learning to communicate in, with and about mathematics is a key part of learning mathematics (Niss & Højgaard, 2011). Therefore, understanding how students’ mathematical writing is shaped is important to mathematics education research. In this paper the notion of ‘writer identity’ (Ivanič, 1998; ......; Burgess & Ivanič, 2010) is introduced and operationalised in relation to students’ mathematical writing and through a case study it is illustrated how this analytic tool can facilitate valuable insights when exploring students’ mathematical writing....

  4. PROVE Land Cover and Leaf Area of Jornada Experimental Range, New Mexico, 1997

    Data.gov (United States)

    National Aeronautics and Space Administration — Field measurement of shrubland ecological properties is important for both site monitoring and validation of remote-sensing information. During the PROVE exercise on...

  5. Use of Proficiency Testing as a Tool to Improve Quality in Microbiology Laboratories

    OpenAIRE

    Stang, Heather L.; Anderson, Nancy L.

    2013-01-01

    Proficiency testing (PT) is a valuable tool for assessing laboratory performance and verifying the accuracy and reliability of test results. Participation is required by the Clinical Laboratory Improvement Amendments (CLIA) of 1988 for each of the microbiology subspecialties (bacteriology, mycobacteriology, mycology, parasitology, and virology), and the regulations include specific PT requirements for each subspecialty. To determine the use and perceived value of PT beyond meeting CLIA requir...

  6. Metabolic engineering tools in model cyanobacteria.

    Science.gov (United States)

    Carroll, Austin L; Case, Anna E; Zhang, Angela; Atsumi, Shota

    2018-03-26

    Developing sustainable routes for producing chemicals and fuels is one of the most important challenges in metabolic engineering. Photoautotrophic hosts are particularly attractive because of their potential to utilize light as an energy source and CO 2 as a carbon substrate through photosynthesis. Cyanobacteria are unicellular organisms capable of photosynthesis and CO 2 fixation. While engineering in heterotrophs, such as Escherichia coli, has result in a plethora of tools for strain development and hosts capable of producing valuable chemicals efficiently, these techniques are not always directly transferable to cyanobacteria. However, recent efforts have led to an increase in the scope and scale of chemicals that cyanobacteria can produce. Adaptations of important metabolic engineering tools have also been optimized to function in photoautotrophic hosts, which include Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR)-Cas9, 13 C Metabolic Flux Analysis (MFA), and Genome-Scale Modeling (GSM). This review explores innovations in cyanobacterial metabolic engineering, and highlights how photoautotrophic metabolism has shaped their development. Copyright © 2018 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

  7. A SOFTWARE TOOL TO COMPARE MEASURED AND SIMULATED BUILDING ENERGY PERFORMANCE DATA

    Energy Technology Data Exchange (ETDEWEB)

    Maile, Tobias; Bazjanac, Vladimir; O' Donnell, James; Garr, Matthew

    2011-11-01

    Building energy performance is often inadequate when compared to design goals. To link design goals to actual operation one can compare measured with simulated energy performance data. Our previously developed comparison approach is the Energy Performance Comparison Methodology (EPCM), which enables the identification of performance problems based on a comparison of measured and simulated performance data. In context of this method, we developed a software tool that provides graphing and data processing capabilities of the two performance data sets. The software tool called SEE IT (Stanford Energy Efficiency Information Tool) eliminates the need for manual generation of data plots and data reformatting. SEE IT makes the generation of time series, scatter and carpet plots independent of the source of data (measured or simulated) and provides a valuable tool for comparing measurements with simulation results. SEE IT also allows assigning data points on a predefined building object hierarchy and supports different versions of simulated performance data. This paper briefly introduces the EPCM, describes the SEE IT tool and illustrates its use in the context of a building case study.

  8. A Job Monitoring and Accounting Tool for the LSF Batch System

    International Nuclear Information System (INIS)

    Sarkar, Subir; Taneja, Sonia

    2011-01-01

    This paper presents a web based job monitoring and group-and-user accounting tool for the LSF Batch System. The user oriented job monitoring displays a simple and compact quasi real-time overview of the batch farm for both local and Grid jobs. For Grid jobs the Distinguished Name (DN) of the Grid users is shown. The overview monitor provides the most up-to-date status of a batch farm at any time. The accounting tool works with the LSF accounting log files. The accounting information is shown for a few pre-defined time periods by default. However, one can also compute the same information for any arbitrary time window. The tool already proved to be an extremely useful means to validate more extensive accounting tools available in the Grid world. Several sites have already been using the present tool and more sites running the LSF batch system have shown interest. We shall discuss the various aspects that make the tool essential for site administrators and end-users alike and outline the current status of development as well as future plans.

  9. The Consortium for the Valuation of Applications Benefits Linked with Earth Science (VALUABLES)

    Science.gov (United States)

    Kuwayama, Y.; Mabee, B.; Wulf Tregar, S.

    2017-12-01

    National and international organizations are placing greater emphasis on the societal and economic benefits that can be derived from applications of Earth observations, yet improvements are needed to connect to the decision processes that produce actions with direct societal benefits. There is a need to substantiate the benefits of Earth science applications in socially and economically meaningful terms in order to demonstrate return on investment and to prioritize investments across data products, modeling capabilities, and information systems. However, methods and techniques for quantifying the value proposition of Earth observations are currently not fully established. Furthermore, it has been challenging to communicate the value of these investments to audiences beyond the Earth science community. The Consortium for the Valuation of Applications Benefits Linked with Earth Science (VALUABLES), a cooperative agreement between Resources for the Future (RFF) and the National Aeronautics and Space Administration (NASA), has the goal of advancing methods for the valuation and communication of the applied benefits linked with Earth observations. The VALUABLES Consortium will focus on three pillars: (a) a research pillar that will apply existing and innovative methods to quantify the socioeconomic benefits of information from Earth observations; (b) a capacity building pillar to catalyze interdisciplinary linkages between Earth scientists and social scientists; and (c) a communications pillar that will convey the value of Earth observations to stakeholders in government, universities, the NGO community, and the interested public. In this presentation, we will describe ongoing and future activities of the VALUABLES Consortium, provide a brief overview of frameworks to quantify the socioeconomic value of Earth observations, and describe how Earth scientists and social scientist can get involved in the Consortium's activities.

  10. TOOLS OF MARKETING COMMUNICATIONS IN POLITICS AND THE ECONOMY, DEPENDING ON THE LIFE CYCLE

    Directory of Open Access Journals (Sweden)

    Tatyana L. Shklyar

    2014-01-01

    Full Text Available This article demonstrates how much can be similar absolutely different areas as politics and economy.Analyzing the approaches to marketing in these areas, you can gather a lot of valuable and useful. The authors discuss the tools of marketing communications, depending on the life cycle of goods and drawa parallel between business and politics. Note that thetools of marketing communications are very numerousand diverse but is most effective at a particular time. Provides specific recommendations on the relevance of tools, aimed at promotion of the goods in the certaintime intervals life cycle.

  11. Proving termination of graph transformation systems using weighted type graphs over semirings

    NARCIS (Netherlands)

    Bruggink, H.J.S.; König, B.; Nolte, D.; Zantema, H.; Parisi-Presicce, F.; Westfechtel, B.

    2015-01-01

    We introduce techniques for proving uniform termination of graph transformation systems, based on matrix interpretations for string rewriting. We generalize this technique by adapting it to graph rewriting instead of string rewriting and by generalizing to ordered semirings. In this way we obtain a

  12. Users manual on database of the Piping Reliability Proving Tests at the Japan Atomic Energy Research Institute

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    Japan Atomic Energy Research Institute(JAERI) conducted Piping Reliability Proving Tests from 1975 to 1992 based upon the contracts between JAERI and Science and Technology Agency of Japan under the auspices of the special account law for electric power development promotion. The purposes of those tests are to prove the structural reliability of the primary cooling piping constituting a part of the pressure boundary in the water reactor power plants. The tests with large experimental facilities had ended already in 1990. After that piping reliability analysis by the probabilistic method followed until 1992. This report describes the users manual on databases about the test results using the large experimental facilities. Objectives of the piping reliability proving tests are to prove that the primary piping of the water reactor (1) be reliable throughout the service period, (2) have no possibility of rupture, (3) bring no detrimental influence on the surrounding instrumentations or equipments near the break location. The research activities using large scale piping test facilities are described. The present report does the database about the test results pairing the former report. With these two reports, all the feature of Piping Reliability Proving Tests is made clear. Briefings of the tests are described also written in Japanese or English. (author)

  13. A GIS-based Spatial Decision Support System for environmentally valuable areas in the context of sustainable development of Poland

    Science.gov (United States)

    Kubacka, Marta

    2013-04-01

    The issue of spatial development, and thus proper environmental management and protection at naturally valuable areas is today considered a major hazard to the stability of the World ecological system. The increasing demand for areas with substantial environmental and landscape assets, incorrect spatial development, improper implementation of law as well as low citizen awareness bring about significant risk of irrevocable loss of naturally valuable areas. The elaboration of a Decision Support System in the form of collection of spatial data will facilitate solving complex problems concerning spatial development. The elaboration of a model utilizing a number of IT tools will boost the effectiveness of taking spatial decisions by decision-makers. Proper spatial data management becomes today a key element in management based on knowledge, namely sustainable development. Decision Support Systems are definied as model-based sets of procedures for processing data and judgments to assist a manager in his decision-making. The main purpose of the project was to elaborate the spatial decision support system for the Sieraków Landscape Park. A landscape park in Poland comprises a protected area due to environmental, historic and cultural values as well as landscape assets for the purpose of maintaining and popularizing these values in the conditions of sustainable development. It also defines the forms of protected area management and introduces bans concerning activity at these areas by means of the obligation to prepare and implement environmental protection plans by a director of the complex of landscape parks. As opposed to national parks and reserves, natural landscape parks are not the areas free from economic activity, thus agricultural lands, forest lands and other real properties located within the boundaries of natural landscape parks are subject to economic utilization Research area was subject to the analysis with respect to the implementation of investment

  14. The Rg1 allele as a valuable tool for genetic transformation of the tomato 'Micro-Tom' model system

    Directory of Open Access Journals (Sweden)

    Quecini Vera

    2010-10-01

    Full Text Available Abstract Background The cultivar Micro-Tom (MT is regarded as a model system for tomato genetics due to its short life cycle and miniature size. However, efforts to improve tomato genetic transformation have led to protocols dependent on the costly hormone zeatin, combined with an excessive number of steps. Results Here we report the development of a MT near-isogenic genotype harboring the allele Rg1 (MT-Rg1, which greatly improves tomato in vitro regeneration. Regeneration was further improved in MT by including a two-day incubation of cotyledonary explants onto medium containing 0.4 μM 1-naphthaleneacetic acid (NAA before cytokinin treatment. Both strategies allowed the use of 5 μM 6-benzylaminopurine (BAP, a cytokinin 100 times less expensive than zeatin. The use of MT-Rg1 and NAA pre-incubation, followed by BAP regeneration, resulted in high transformation frequencies (near 40%, in a shorter protocol with fewer steps, spanning approximately 40 days from Agrobacterium infection to transgenic plant acclimatization. Conclusions The genetic resource and the protocol presented here represent invaluable tools for routine gene expression manipulation and high throughput functional genomics by insertional mutagenesis in tomato.

  15. Tools for predicting the PK/PD of therapeutic proteins.

    Science.gov (United States)

    Diao, Lei; Meibohm, Bernd

    2015-07-01

    Assessments of the pharmacokinetic/pharmacodynamic (PK/PD) characteristics are an integral part in the development of novel therapeutic agents. Compared with traditional small molecule drugs, therapeutic proteins possess many distinct PK/PD features that necessitate the application of modified or separate approaches for assessing their PK/PD relationships. In this review, the authors discuss tools that are utilized to describe and predict the PK/PD features of therapeutic proteins and that are valuable additions in the armamentarium of drug development approaches to facilitate and accelerate their successful preclinical and clinical development. A variety of state-of-the-art PK/PD tools is currently being applied and has been adjusted to support the development of proteins as therapeutics, including allometric scaling approaches, target-mediated disposition models, first-in-man dose calculations, physiologically based PK models and empirical and semi-mechanistic PK/PD modeling. With the advent of the next generation of biologics including bioengineered antibody constructs being developed, these tools will need to be further refined and adapted to ensure their applicability and successful facilitation of the drug development process for these novel scaffolds.

  16. Case report 486: Spondyloepiphyseal dysplasia tarda (SDT) (presumptively proved)

    International Nuclear Information System (INIS)

    Brown, D.D.; Childress, M.H.

    1988-01-01

    A 51 year old man with severe degenerative joint disease, short stature, barrel chest deformity, platyspondyly, a narrow pelvis, small iliac bones, dysplastic femoral heads and necks, notching of the patellae and flattening of the femoral intercondylar notches has been described as an example of Spondyloepiphyseal dysplasia tarda SDT. The entity was discussed in detail. The notching of the patellae has not been reported in association with SDT to the authors' knowledge. Characteristic features of SDT allow it to be differentiated from other arthropathies and dysplasias and these distinctions have been emphasized in the discussion. The diagnosis in this case can only be considered presumptively proved. (orig./MG)

  17. Ecological survey of M-Field, Edgewood Area Aberdeen Proving Ground, Maryland

    Energy Technology Data Exchange (ETDEWEB)

    Downs, J.L.; Eberhardt, L.E.; Fitzner, R.E.; Rogers, L.E.

    1991-12-01

    An ecological survey was conducted on M-Field, at the Edgewood Area, Aberdeen Proving Ground, Maryland. M-Field is used routinely to test army smokes and obscurants, including brass flakes, carbon fibers, and fog oils. The field has been used for testing purposes for the past 40 years, but little documented history is available. Under current environmental regulations, the test field must be assessed periodically to document the presence or potential use of the area by threatened and endangered species. The M-Field area is approximately 370 acres and is part of the US Army's Edgewood Area at Aberdeen Proving Ground in Harford County, Maryland. The grass-covered field is primarily lowlands with elevations from about 1.0 to 8 m above sea level, and several buildings and structures are present on the field. The ecological assessment of M-Field was conducted in three stages, beginning with a preliminary site visit in May to assess sampling requirements. Two field site visits were made June 3--7, and August 12--15, 1991, to identify the biota existing on the site. Data were gathered on vegetation, small mammals, invertebrates, birds, large mammals, amphibians, and reptiles.

  18. Ecological survey of M-Field, Edgewood Area Aberdeen Proving Ground, Maryland

    Energy Technology Data Exchange (ETDEWEB)

    Downs, J.L.; Eberhardt, L.E.; Fitzner, R.E.; Rogers, L.E.

    1991-12-01

    An ecological survey was conducted on M-Field, at the Edgewood Area, Aberdeen Proving Ground, Maryland. M-Field is used routinely to test army smokes and obscurants, including brass flakes, carbon fibers, and fog oils. The field has been used for testing purposes for the past 40 years, but little documented history is available. Under current environmental regulations, the test field must be assessed periodically to document the presence or potential use of the area by threatened and endangered species. The M-Field area is approximately 370 acres and is part of the US Army`s Edgewood Area at Aberdeen Proving Ground in Harford County, Maryland. The grass-covered field is primarily lowlands with elevations from about 1.0 to 8 m above sea level, and several buildings and structures are present on the field. The ecological assessment of M-Field was conducted in three stages, beginning with a preliminary site visit in May to assess sampling requirements. Two field site visits were made June 3--7, and August 12--15, 1991, to identify the biota existing on the site. Data were gathered on vegetation, small mammals, invertebrates, birds, large mammals, amphibians, and reptiles.

  19. Rosetta Structure Prediction as a Tool for Solving Difficult Molecular Replacement Problems.

    Science.gov (United States)

    DiMaio, Frank

    2017-01-01

    Molecular replacement (MR), a method for solving the crystallographic phase problem using phases derived from a model of the target structure, has proven extremely valuable, accounting for the vast majority of structures solved by X-ray crystallography. However, when the resolution of data is low, or the starting model is very dissimilar to the target protein, solving structures via molecular replacement may be very challenging. In recent years, protein structure prediction methodology has emerged as a powerful tool in model building and model refinement for difficult molecular replacement problems. This chapter describes some of the tools available in Rosetta for model building and model refinement specifically geared toward difficult molecular replacement cases.

  20. Laboratory versus industrial cutting force sensor in tool condition monitoring system

    International Nuclear Information System (INIS)

    Szwajka, K

    2005-01-01

    Research works concerning the utilisation of cutting force measures in tool condition monitoring usually present results and deliberations based on laboratory sensors. These sensors are too fragile to be used in industrial practice. Industrial sensors employed on the factory floor are less accurate, and this must be taken into account when creating a tool condition monitoring strategy. Another drawback of most of these works is that constant cutting parameters are used for the entire tool life. This does not reflect industrial practice where the same tool is used at different feeds and depths of cut in sequential passes. This paper presents a comparison of signals originating from laboratory and industrial cutting force sensors. The usability of the sensor output was studied during a laboratory simulation of industrial cutting conditions. Instead of building mathematical models for the correlation between tool wear and cutting force, an FFBP artificial neural network was used to find which combination of input data would provide an acceptable estimation of tool wear. The results obtained proved that cross talk between channels has an important influence on cutting force measurements, however this input configuration can be used for a tool condition monitoring system

  1. Proving maintenance practices at France's CETIC facility

    International Nuclear Information System (INIS)

    Anon.

    1987-01-01

    CETIC, a PWR maintenance testing, training and validation centre became operational in September 1986. It is designed to meet the following basic requirements: development of plant maintenance processes to reduce work time, validation of tools for use during maintenance, training and qualification of teams for performing high-technology, high-risk operations in nuclear power plants. (U.K.)

  2. Selecting analytical tools for characterization of polymersomes in aqueous solution

    DEFF Research Database (Denmark)

    Habel, Joachim Erich Otto; Ogbonna, Anayo; Larsen, Nanna

    2015-01-01

    /purification. Of the analytical methods tested, Cryo-transmission electron microscopy and atomic force microscopy (AFM) turned out to be advantageous for polymersomes with smaller diameter than 200 nm, whereas confocal microscopy is ideal for diameters >400 nm. Polymersomes in the intermediate diameter range can be characterized...... using freeze fracture Cryo-scanning electron microscopy (FF-Cryo-SEM) and nanoparticle tracking analysis (NTA). Small angle X-ray scattering (SAXS) provides reliable data on bilayer thickness and internal structure, Cryo-TEM on multilamellarity. Taken together, these tools are valuable...

  3. Analytics for smart energy management tools and applications for sustainable manufacturing

    CERN Document Server

    Oh, Seog-Chan

    2016-01-01

    This book introduces the issues and problems that arise when implementing smart energy management for sustainable manufacturing in the automotive manufacturing industry and the analytical tools and applications to deal with them. It uses a number of illustrative examples to explain energy management in automotive manufacturing, which involves most types of manufacturing technology and various levels of energy consumption. It demonstrates how analytical tools can help improve energy management processes, including forecasting, consumption, and performance analysis, emerging new technology identification as well as investment decisions for establishing smart energy consumption practices. It also details practical energy management systems, making it a valuable resource for professionals involved in real energy management processes, and allowing readers to implement the procedures and applications presented.

  4. BODIPY-phosphane as a versatile tool for easy access to new metal-based theranostics

    NARCIS (Netherlands)

    Tasan, Semra; Zava, Olivier; Bertrand, Benoit; Bernhard, Claire; Goze, Christine; Picquet, Michel; Le Gendre, Pierre; Harvey, Pierre; Denat, Franck; Casini, Angela; Bodio, Ewen

    2013-01-01

    A new BODIPY-phosphane was synthesized and proved to be a versatile tool for imaging organometallic complexes. It also led to easy access to a new family of theranostics, featuring gold, ruthenium and osmium complexes. The compounds' cytotoxicity was tested on cancer cells, and their cell uptake was

  5. Effect of tool shape and welding parameters on mechanical properties and microstructure of dissimilar friction stir welded aluminium alloys

    OpenAIRE

    Chetan Aneja; Amit Handa

    2016-01-01

    In the present experimental study, dissimilar aluminum alloy AA5083 and AA6082 were friction stir welded by varying tool shape, welding speed and rotary speed of the tool in order to investigate the effect of varying tool shape and welding parameters on the mechanical properties as well as microstructure. The friction stir welding (FSW) process parameters have great influence on heat input per unit length of weld. The outcomes of experimental study prove that mechanical properties increases w...

  6. Temporal and spatial distribution of roots and competition for nitrogen in pea-barley intercrops - a field study employing P-32 technique

    DEFF Research Database (Denmark)

    Hauggaard-Nielsen, H.; Ambus, P.; Jensen, E.S.

    2001-01-01

    was the dominant component of the pea-barley intercrop, obtaining 90% of its sole crop yield, while pea produced only 15% of the grains of a sole crop pea. Intercropping of pea and barley improved the utilization of plant growth resources (LER > 1) as compared to sole crops. Root system distribution in time...... and space can partly explain interspecific competition. The P-32 methodology proved to be a valuable tool for determining root dynamics in intercropping systems....

  7. Providing access to risk prediction tools via the HL7 XML-formatted risk web service.

    Science.gov (United States)

    Chipman, Jonathan; Drohan, Brian; Blackford, Amanda; Parmigiani, Giovanni; Hughes, Kevin; Bosinoff, Phil

    2013-07-01

    Cancer risk prediction tools provide valuable information to clinicians but remain computationally challenging. Many clinics find that CaGene or HughesRiskApps fit their needs for easy- and ready-to-use software to obtain cancer risks; however, these resources may not fit all clinics' needs. The HughesRiskApps Group and BayesMendel Lab therefore developed a web service, called "Risk Service", which may be integrated into any client software to quickly obtain standardized and up-to-date risk predictions for BayesMendel tools (BRCAPRO, MMRpro, PancPRO, and MelaPRO), the Tyrer-Cuzick IBIS Breast Cancer Risk Evaluation Tool, and the Colorectal Cancer Risk Assessment Tool. Software clients that can convert their local structured data into the HL7 XML-formatted family and clinical patient history (Pedigree model) may integrate with the Risk Service. The Risk Service uses Apache Tomcat and Apache Axis2 technologies to provide an all Java web service. The software client sends HL7 XML information containing anonymized family and clinical history to a Dana-Farber Cancer Institute (DFCI) server, where it is parsed, interpreted, and processed by multiple risk tools. The Risk Service then formats the results into an HL7 style message and returns the risk predictions to the originating software client. Upon consent, users may allow DFCI to maintain the data for future research. The Risk Service implementation is exemplified through HughesRiskApps. The Risk Service broadens the availability of valuable, up-to-date cancer risk tools and allows clinics and researchers to integrate risk prediction tools into their own software interface designed for their needs. Each software package can collect risk data using its own interface, and display the results using its own interface, while using a central, up-to-date risk calculator. This allows users to choose from multiple interfaces while always getting the latest risk calculations. Consenting users contribute their data for future

  8. Construction of Two mCherry Plasmids (pXG-mCherry for Transgenic Leishmania: Valuable Tools for Future Molecular Analysis

    Directory of Open Access Journals (Sweden)

    Andrés Vacas

    2017-01-01

    Full Text Available Leishmania is the causative agent of leishmaniasis, a neglected tropical disease that affects more than 12 million people around the world. Current treatments are toxic and poorly effective due to the acquisition of resistance within Leishmania populations. Thus, the pursuit for new antileishmanial drugs is a priority. The available methods for drug screening based on colorimetric assays using vital dyes are time-consuming. Currently, the use of fluorescent reporter proteins is replacing the use of viability indicator dyes. We have constructed two plasmids expressing the red fluorescent protein mCherry with multiple cloning sites (MCS, adequate for N- and C-terminal fusion protein constructs. Our results also show that the improved pXG-mCherry plasmid can be employed for drug screening in vitro. The use of the red fluorescent protein, mCherry, is an easier tool for numerous assays, not only to test pharmacological compounds, but also to determine the subcellular localization of proteins.

  9. Cardiomyocyte H9c2 cells present a valuable alternative to fish lethal testing for azoxystrobin

    International Nuclear Information System (INIS)

    Rodrigues, Elsa T.; Pardal, Miguel Â.; Laizé, Vincent; Cancela, M. Leonor; Oliveira, Paulo J.; Serafim, Teresa L.

    2015-01-01

    The present study aims at identifying, among six mammalian and fish cell lines, a sensitive cell line whose in vitro median inhibitory concentration (IC_5_0) better matches the in vivo short-term Sparus aurata median lethal concentration (LC_5_0). IC_5_0_s and LC_5_0 were assessed after exposure to the widely used fungicide azoxystrobin (AZX). Statistical results were relevant for most cell lines after 48 h of AZX exposure, being H9c2 the most sensitive cells, as well as the ones which provided the best prediction of fish toxicity, with a LC_5_0_,_9_6_h/IC_5_0_,_4_8_h = 0.581. H9c2 cell proliferation upon 72 h of AZX exposure revealed a LC_5_0_,_9_6_h/IC_5_0_,_7_2_h = 0.998. Therefore, identical absolute sensitivities were attained for both in vitro and in vivo assays. To conclude, the H9c2 cell-based assay is reliable and represents a suitable ethical alternative to conventional fish assays for AZX, and could be used to get valuable insights into the toxic effects of other pesticides. - Highlights: • Fish toxicity data are still considered standard information in ecotoxicology. • Alternatives to animal testing have become an important topic of research. • Cell-based assays are currently a promising in vitro alternative. • Comparative studies to accelerate the validation of cell-based methods are required. • H9c2 cell line proved to produce in vitro reliable toxicity results for azoxystrobin. - The application of cell-based assays for environmental toxicity studies would greatly reduce the number of fish needed for toxicity testing without any loss of reliability.

  10. E-Block: A Tangible Programming Tool with Graphical Blocks

    Directory of Open Access Journals (Sweden)

    Danli Wang

    2013-01-01

    Full Text Available This paper designs a tangible programming tool, E-Block, for children aged 5 to 9 to experience the preliminary understanding of programming by building blocks. With embedded artificial intelligence, the tool defines the programming blocks with the sensors as the input and enables children to write programs to complete the tasks in the computer. The symbol on the programming block's surface is used to help children understanding the function of each block. The sequence information is transferred to computer by microcomputers and then translated into semantic information. The system applies wireless and infrared technologies and provides user with feedbacks on both screen and programming blocks. Preliminary user studies using observation and user interview methods are shown for E-Block's prototype. The test results prove that E-Block is attractive to children and easy to learn and use. The project also highlights potential advantages of using single chip microcomputer (SCM technology to develop tangible programming tools for children.

  11. Com aplicar les proves paramètriques bivariades t de Student i ANOVA en SPSS. Cas pràctic

    Directory of Open Access Journals (Sweden)

    María-José Rubio-Hurtado

    2012-07-01

    Full Text Available Les proves paramètriques són un tipus de proves de significació estadística que quantifiquen l'associació o independència entre una variable quantitativa i una categòrica. Les proves paramètriques són exigents amb certs requisits previs per a la seva aplicació: la distribució Normal de la variable quantitativa en els grups que es comparen, l'homogeneïtat de variàncies en les poblacions de les quals procedeixen els grups i una n mostral no inferior a 30. El seu no compliment comporta la necessitat de recórrer a proves estadístiques no paramètriques. Les proves paramètriques es classifiquen en dos: prova t (per a una mostra o per a dues mostres relacionades o independents i prova ANOVA (per a més de dues mostres independents.

  12. Mound's decommissioning experience, tooling, and techniques

    International Nuclear Information System (INIS)

    Combs, A.B.; Davis, W.P.; Elswick, T.C.; Garner, J.M.; Geichman, J.R.

    1982-01-01

    Monsanto Research Corporation (MRC), which operates Mound for the Department of Energy (DOE), has been decommissioning radioactively contaminated facilities since 1949. We are currently decommissioning three plutonium-238 contaminated facilities (approximately 50,000 ft 2 ) that contained 1100 linear ft of gloveboxes; 900 linear ft of conveyor housing; 2650 linear ft of dual underground liquid waste lines; and associated contaminated piping, services, equipment, structures, and soil. As of June 1982, over 29,000 Ci of plutonium-238 have been removed in waste and scrap residues. As a result of the current and previous decommissioning projects, valuable experience has been gained in tooling and techniques. Special techniques have been developed in planning, exposure control, contamination control, equipment removal, structural decontamination, and waste packaging

  13. PICKLED PUMPKIN IS VALUABLE FOOD PRODUCT

    Directory of Open Access Journals (Sweden)

    T. A. Sannikova

    2017-01-01

    Full Text Available One of the main directions of the food industry development is the production of functional food products. Changes in the human’s diet structure cause that none of population group does receive necessary amount of vitamins, macro and microelements in healthy routine diet. To solve this problem, food stuffs enhanced by different ingredients enable to improve the biological and food value. The pumpkin is a valuable source of such important substances as carotene and pectin. Addition of garlic and hot pepper ingredients to process of pumpkin pickling enables to enrich the products with carbohydrates, proteins, microelements, which have low or no content in the pumpkin fruit. Therefore, the study of the influence of the different quantities of garlic and hot pepper additions on chemical composition of finished product is very important. The influence of plant additions used on chemical composition of finished product had been well determined. It was shown that through increased doses of garlic and hot pepper ingredients as compared with control, the carotene and dry matter content then decreased by 1.16%-3.43% in pickled pumpkin, while the pectin content depended on added component. The highest pectin content, 0.71% was observed at addition of 10 g. garlic ingredient per 1 kg. of raw matter, that was 4.1 times higher than control. With increased addition of hot pepper ingredient the pectin accumulation was decreasing from 0.58% in control to 0.36% in variant 10g. per 1kg. of raw matter.

  14. An Archeological Overview and Management Plan for the Dugway Proving Ground.

    Science.gov (United States)

    1984-03-29

    niches, particulary the lacustrine environment of the Great Basin (Baumhoff and Heizer 1965, Butler 1978, Heizer and Krieger 1956, Heizer and Harper...power that would capture the animals souls, rendering them docile and stupid (Steward 1970:34). Other large game was present, but were not numerous...uni versity. Baum, Bernard. 1947. Dugway Proving Ground. Aberdeen: U.S. Army Chemical Corps.* Bailmhoff, W.A. and R.F. Heizer . 1965. Postglacial

  15. Inventory of species and cultivars potentially valuable for forest/biomass production

    Energy Technology Data Exchange (ETDEWEB)

    Lavoie, G

    1981-01-01

    To prepare a guide for experiments in mini-rotation or short rotation forest production, potentially valuable species and cultivars have been inventoried. In this text, 288 species are listed under 31 genera, 27 deciduous and 4 coniferous. This partial inventory was made for the Northern Hemisphere and different climates, ranging from the tropical zone to the cold temperate zone. To be included a species had to satisfy the following conditions: ease of established and rapid juvenile growth. The list of species and cultivars is given in alphabetical order. 55 references.

  16. Development of a Scale-up Tool for Pervaporation Processes

    Directory of Open Access Journals (Sweden)

    Holger Thiess

    2018-01-01

    Full Text Available In this study, an engineering tool for the design and optimization of pervaporation processes is developed based on physico-chemical modelling coupled with laboratory/mini-plant experiments. The model incorporates the solution-diffusion-mechanism, polarization effects (concentration and temperature, axial dispersion, pressure drop and the temperature drop in the feed channel due to vaporization of the permeating components. The permeance, being the key model parameter, was determined via dehydration experiments on a mini-plant scale for the binary mixtures ethanol/water and ethyl acetate/water. A second set of experimental data was utilized for the validation of the model for two chemical systems. The industrially relevant ternary mixture, ethanol/ethyl acetate/water, was investigated close to its azeotropic point and compared to a simulation conducted with the determined binary permeance data. Experimental and simulation data proved to agree very well for the investigated process conditions. In order to test the scalability of the developed engineering tool, large-scale data from an industrial pervaporation plant used for the dehydration of ethanol was compared to a process simulation conducted with the validated physico-chemical model. Since the membranes employed in both mini-plant and industrial scale were of the same type, the permeance data could be transferred. The comparison of the measured and simulated data proved the scalability of the derived model.

  17. ReGaTE: Registration of Galaxy Tools in Elixir.

    Science.gov (United States)

    Doppelt-Azeroual, Olivia; Mareuil, Fabien; Deveaud, Eric; Kalaš, Matúš; Soranzo, Nicola; van den Beek, Marius; Grüning, Björn; Ison, Jon; Ménager, Hervé

    2017-06-01

    Bioinformaticians routinely use multiple software tools and data sources in their day-to-day work and have been guided in their choices by a number of cataloguing initiatives. The ELIXIR Tools and Data Services Registry (bio.tools) aims to provide a central information point, independent of any specific scientific scope within bioinformatics or technological implementation. Meanwhile, efforts to integrate bioinformatics software in workbench and workflow environments have accelerated to enable the design, automation, and reproducibility of bioinformatics experiments. One such popular environment is the Galaxy framework, with currently more than 80 publicly available Galaxy servers around the world. In the context of a generic registry for bioinformatics software, such as bio.tools, Galaxy instances constitute a major source of valuable content. Yet there has been, to date, no convenient mechanism to register such services en masse. We present ReGaTE (Registration of Galaxy Tools in Elixir), a software utility that automates the process of registering the services available in a Galaxy instance. This utility uses the BioBlend application program interface to extract service metadata from a Galaxy server, enhance the metadata with the scientific information required by bio.tools, and push it to the registry. ReGaTE provides a fast and convenient way to publish Galaxy services in bio.tools. By doing so, service providers may increase the visibility of their services while enriching the software discovery function that bio.tools provides for its users. The source code of ReGaTE is freely available on Github at https://github.com/C3BI-pasteur-fr/ReGaTE . © The Author 2017. Published by Oxford University Press.

  18. A Hybrid Approach to Proving Memory Reference Monotonicity

    KAUST Repository

    Oancea, Cosmin E.

    2013-01-01

    Array references indexed by non-linear expressions or subscript arrays represent a major obstacle to compiler analysis and to automatic parallelization. Most previous proposed solutions either enhance the static analysis repertoire to recognize more patterns, to infer array-value properties, and to refine the mathematical support, or apply expensive run time analysis of memory reference traces to disambiguate these accesses. This paper presents an automated solution based on static construction of access summaries, in which the reference non-linearity problem can be solved for a large number of reference patterns by extracting arbitrarily-shaped predicates that can (in)validate the reference monotonicity property and thus (dis)prove loop independence. Experiments on six benchmarks show that our general technique for dynamic validation of the monotonicity property can cover a large class of codes, incurs minimal run-time overhead and obtains good speedups. © 2013 Springer-Verlag.

  19. Research Objectives for Human Missions in the Proving Ground of Cis-Lunar Space

    Science.gov (United States)

    Spann, James; Niles, Paul; Eppler, Dean; Kennedy, Kriss; Lewis, Ruthan; Sullivan, Thomas

    2016-07-01

    Introduction: This talk will introduce the preliminary findings in support of NASA's Future Capabilities Team. In support of the ongoing studies conducted by NASA's Future Capabilities Team, we are tasked with collecting re-search objectives for the Proving Ground activities. The objectives could include but are certainly not limited to: demonstrating crew well being and performance over long duration missions, characterizing lunar volatiles, Earth monitoring, near Earth object search and identification, support of a far-side radio telescope, and measuring impact of deep space environment on biological systems. Beginning in as early as 2023, crewed missions beyond low Earth orbit will be enabled by the new capabilities of the SLS and Orion vehicles. This will initiate the "Proving Ground" phase of human exploration with Mars as an ultimate destination. The primary goal of the Proving Ground is to demonstrate the capability of suitably long dura-tion spaceflight without need of continuous support from Earth, i.e. become Earth Independent. A major component of the Proving Ground phase is to conduct research activities aimed at accomplishing major objectives selected from a wide variety of disciplines including but not limited to: Astronomy, Heliophysics, Fun-damental Physics, Planetary Science, Earth Science, Human Systems, Fundamental Space Biology, Microgravity, and In Situ Resource Utilization. Mapping and prioritizing the most important objectives from these disciplines will provide a strong foundation for establishing the architecture to be utilized in the Proving Ground. Possible Architectures: Activities and objectives will be accomplished during the Proving Ground phase using a deep space habitat. This habitat will potentially be accompanied by a power/propulsion bus capable of moving the habitat to accomplish different objectives within cis-lunar space. This architecture can also potentially support stag-ing of robotic and tele-robotic assets as well as

  20. TOOLS FOR COLABORATIVE LEARNING: A ROLE-PLAYING PRACTICE

    Directory of Open Access Journals (Sweden)

    Marta Ortiz-de-Urbina Criado

    2010-11-01

    Full Text Available Role-playing is an active participation tool that facilitates cooperative learning. It has also proved to be more effective in developing competencies than traditional methods. This technique is essential to make theory and practice compatible as is required in order to adapt subjects to the new education system based on the Bolonia’s agreement, especially in Social Sciences disciplines. Consequently, the objective of this paper is to show the effect and use of role-playing applied to management area. Therefore, we analyze and design the role-playing, putting it in practice in the classroom in Human Resource Management subject of different academic degrees. To conclude, this paper has shown the importance of role-playing as a learning tool and development of skills like work cooperation, problem and conflict solving, decision making, and managing complex systems.

  1. Field-programmable custom computing technology architectures, tools, and applications

    CERN Document Server

    Luk, Wayne; Pocek, Ken

    2000-01-01

    Field-Programmable Custom Computing Technology: Architectures, Tools, and Applications brings together in one place important contributions and up-to-date research results in this fast-moving area. In seven selected chapters, the book describes the latest advances in architectures, design methods, and applications of field-programmable devices for high-performance reconfigurable systems. The contributors to this work were selected from the leading researchers and practitioners in the field. It will be valuable to anyone working or researching in the field of custom computing technology. It serves as an excellent reference, providing insight into some of the most challenging issues being examined today.

  2. Valuable books from the library of Paul Gore (Identification and/or inventory of sources

    Directory of Open Access Journals (Sweden)

    Maria Danilov

    2013-12-01

    Full Text Available Paul Gore (1875-1927 - an outstanding figure of the socio-political, scientific and cultural life of Bessarabia at the beginning of 20th century, was also known among his contemporaries as a keen collector of old and rare books. Undoubtedly, the most valuable part of the library of Paul Gore consisted of books on the history of Bessarabia. Documents from the National Archives of the Republic of Moldova in Chişinău confirm that he inherited a large part of books from his father Gheorghe Gore (1839-1909. A study of the Paul Gore Fund at the National Archives of Romania in Bucharest gave us a lot of documentary evidence of the destiny of this Bessarabian noble library, which later became a property of the King Ferdinand Fund. However, the fate of its most valuable part - books on the history of Bessarabia, consisted of 651 units of the total number of 6456 volumes - is still unknown.

  3. Sea Buckthorn Oil—A Valuable Source for Cosmeceuticals

    Directory of Open Access Journals (Sweden)

    Marijana Koskovac

    2017-10-01

    Full Text Available Sea buckthorn (Hippophae rhamnoides L., Elaeagnaceae. is a thorny shrub that has small, yellow to dark orange, soft, juicy berries. Due to hydrophilic and lipophilic ingredients, berries have been used as food and medicine. Sea buckthorn (SB oil derived from berries is a source of valuable ingredients for cosmeceuticals. The unique combination of SB oil ingredients, in qualitative and quantitative aspects, provides multiple benefits of SB oil for internal and external use. Externally, SB oil can be applied in both healthy and damaged skin (burns or skin damage of different etiology, as it has good wound healing properties. Due to the well-balanced content of fatty acids, carotenoids, and vitamins, SB oil may be incorporated in cosmeceuticals for dry, flaky, burned, irritated, or rapidly ageing skin. There have been more than 100 ingredients identified in SB oil, some of which are rare in the plant kingdom (e.g., the ratio of palmitoleic to γ-linolenic acid. This review discusses facts related to the origin and properties of SB oil that make it suitable for cosmeceutical formulation.

  4. A little bird told me : Twitter may be growing at 700 per cent a week, but is it a valuable tool for the patch, or a distraction?

    Energy Technology Data Exchange (ETDEWEB)

    Stastny, P

    2009-10-15

    The social networking tool Twitter may soon be adopted by petroleum industry workers as a means of ensuring increased communications. Comprised of social networks, link sharing, and live searching, the tool can be used to conduct subject searchers as well as to link to quarterly reports and press releases. Twitter is also being used to manage crisis communications as well as to monitor activities on the Internet. Twitter may also provide a means for oil and gas operators to follow influential industry bloggers as well as to develop effective communications strategies. It was concluded that Twitter may offer an opportunity for companies to participate in non-traditional communications approaches such as online forums, and other media-sharing tools. 1 fig.

  5. Development and Testing of the Church Environment Audit Tool.

    Science.gov (United States)

    Kaczynski, Andrew T; Jake-Schoffman, Danielle E; Peters, Nathan A; Dunn, Caroline G; Wilcox, Sara; Forthofer, Melinda

    2018-05-01

    In this paper, we describe development and reliability testing of a novel tool to evaluate the physical environment of faith-based settings pertaining to opportunities for physical activity (PA) and healthy eating (HE). Tool development was a multistage process including a review of similar tools, stakeholder review, expert feedback, and pilot testing. Final tool sections included indoor opportunities for PA, outdoor opportunities for PA, food preparation equipment, kitchen type, food for purchase, beverages for purchase, and media. Two independent audits were completed at 54 churches. Interrater reliability (IRR) was determined with Kappa and percent agreement. Of 218 items, 102 were assessed for IRR and 116 could not be assessed because they were not present at enough churches. Percent agreement for all 102 items was over 80%. For 42 items, the sample was too homogeneous to assess Kappa. Forty-six of the remaining items had Kappas greater than 0.60 (25 items 0.80-1.00; 21 items 0.60-0.79), indicating substantial to almost perfect agreement. The tool proved reliable and efficient for assessing church environments and identifying potential intervention points. Future work can focus on applications within faith-based partnerships to understand how church environments influence diverse health outcomes.

  6. Correlation and regression analysis of tools influencing on targets of monetary policy of Central Bank of the Russian Federation

    Directory of Open Access Journals (Sweden)

    Gordyachkova O. V.

    2016-07-01

    Full Text Available the article presents the correlation and regression analysis of the influence of the Central Bank tools of Russian monetary policy on its aims. Such analysis is the basic method of estimating monetary policy efficiency by means of quantity-related parameters. The results outlined by the authors prove the lack of efficiency of influencing tools: inflation, money supply and the exchange rate.

  7. Maternal vaccination and preterm birth: using data mining as a screening tool

    DEFF Research Database (Denmark)

    Orozova-Bekkevold, Ivanka; Jensen, Henrik; Stensballe, Lone

    2007-01-01

    Objective The main purpose of this study was to identify possible associations between medicines used in pregnancy and preterm deliveries using data mining as a screening tool. Settings Prospective cohort study. Methods We used data mining to identify possible correlates between preterm delivery...... measure Preterm birth, a delivery occurring before the 259th day of gestation (i.e., less than 37 full weeks). Results Data mining had indicated that maternal vaccination (among other factors) might be related to preterm birth. The following regression analysis showed that, the women who reported being...... further studies. Data mining, especially with additional refinements, may be a valuable and very efficient tool to screen large databases for relevant information which can be used in clinical and public health research....

  8. TACIT: An open-source text analysis, crawling, and interpretation tool.

    Science.gov (United States)

    Dehghani, Morteza; Johnson, Kate M; Garten, Justin; Boghrati, Reihane; Hoover, Joe; Balasubramanian, Vijayan; Singh, Anurag; Shankar, Yuvarani; Pulickal, Linda; Rajkumar, Aswin; Parmar, Niki Jitendra

    2017-04-01

    As human activity and interaction increasingly take place online, the digital residues of these activities provide a valuable window into a range of psychological and social processes. A great deal of progress has been made toward utilizing these opportunities; however, the complexity of managing and analyzing the quantities of data currently available has limited both the types of analysis used and the number of researchers able to make use of these data. Although fields such as computer science have developed a range of techniques and methods for handling these difficulties, making use of those tools has often required specialized knowledge and programming experience. The Text Analysis, Crawling, and Interpretation Tool (TACIT) is designed to bridge this gap by providing an intuitive tool and interface for making use of state-of-the-art methods in text analysis and large-scale data management. Furthermore, TACIT is implemented as an open, extensible, plugin-driven architecture, which will allow other researchers to extend and expand these capabilities as new methods become available.

  9. Instruments of Inquiry: Understanding the Nature and Role of Design Tools

    DEFF Research Database (Denmark)

    Dalsgaard, Peter

    2017-01-01

    Designers employ a range of tools in most design projects, yet there are few frameworks for understanding how and why they work. On the basis of a well-established school of thought, pragmatism, this paper contributes with a coherent conceptualisation of tools in design, which I label instruments...... of inquiry. This perspective underscores the crucial role that instruments play in design, and the ways in which they scaffold design creativity and exploration. In particular, it highlights that instruments not only augment our capabilities for carrying out intended actions, they also guide our perception...... and understanding of design problems and solutions. I present and discuss a framework consisting of five qualities of instruments of inquiry, which make them valuable in designerly inquiry: perception, conception, externalisation, knowing-through-action, and mediation....

  10. Energy Bucket: A Tool for Power Profiling and Debugging of Sensor Nodes

    DEFF Research Database (Denmark)

    Andersen, Jacob; Hansen, Morten Tranberg

    2009-01-01

    The ability to precisely measure and compare energy consumption and relate this to particular parts of programs is a recurring theme in sensor network research. This paper presents the Energy Bucket, a low-cost tool designed for quick empirical measurements of energy consumptions across 5 decades...... of current draw. The Energy Bucket provides a light-weight state API for the target system, which facilitates easy scorekeeping of energy consumption between different parts of a target program. We demonstrate how this tool can be used to discover programming errors and debug sensor network applications.......Furthermore, we show how this tool, together with the target system API, offers a very detailed analysis of where energy is spent in an application, which proves to be very useful when comparing alternative implementations or validating theoretical energy consumption models....

  11. S&T converging trends in dealing with disaster: A review on AI tools

    International Nuclear Information System (INIS)

    Hasan, Abu Bakar; Isa, Mohd Hafez Mohd.

    2016-01-01

    Science and Technology (S&T) has been able to help mankind to solve or minimize problems when arise. Different methodologies, techniques and tools were developed or used for specific cases by researchers, engineers, scientists throughout the world, and numerous papers and articles have been written by them. Nine selected cases such as flash flood, earthquakes, workplace accident, fault in aircraft industry, seismic vulnerability, disaster mitigation and management, and early fault detection in nuclear industry have been studied. This paper looked at those cases, and their results showed nearly 60% uses artificial intelligence (AI) as a tool. This paper also did some review that will help young researchers in deciding the types of AI tools to be selected; thus proving the future trends in S&T

  12. S&T converging trends in dealing with disaster: A review on AI tools

    Science.gov (United States)

    Hasan, Abu Bakar; Isa, Mohd. Hafez Mohd.

    2016-01-01

    Science and Technology (S&T) has been able to help mankind to solve or minimize problems when arise. Different methodologies, techniques and tools were developed or used for specific cases by researchers, engineers, scientists throughout the world, and numerous papers and articles have been written by them. Nine selected cases such as flash flood, earthquakes, workplace accident, fault in aircraft industry, seismic vulnerability, disaster mitigation and management, and early fault detection in nuclear industry have been studied. This paper looked at those cases, and their results showed nearly 60% uses artificial intelligence (AI) as a tool. This paper also did some review that will help young researchers in deciding the types of AI tools to be selected; thus proving the future trends in S&T.

  13. S&T converging trends in dealing with disaster: A review on AI tools

    Energy Technology Data Exchange (ETDEWEB)

    Hasan, Abu Bakar, E-mail: abakarh@usim.edu.my; Isa, Mohd Hafez Mohd. [Faculty of Science and Technology, Universiti Sains Islam Malaysia, 71800 Nilai, Negeri Sembilan (Malaysia)

    2016-01-22

    Science and Technology (S&T) has been able to help mankind to solve or minimize problems when arise. Different methodologies, techniques and tools were developed or used for specific cases by researchers, engineers, scientists throughout the world, and numerous papers and articles have been written by them. Nine selected cases such as flash flood, earthquakes, workplace accident, fault in aircraft industry, seismic vulnerability, disaster mitigation and management, and early fault detection in nuclear industry have been studied. This paper looked at those cases, and their results showed nearly 60% uses artificial intelligence (AI) as a tool. This paper also did some review that will help young researchers in deciding the types of AI tools to be selected; thus proving the future trends in S&T.

  14. Spin physics and inclusive processes at short distances

    International Nuclear Information System (INIS)

    Craigie, N.S.

    1982-10-01

    The following aspects of spin physics at short distances are studied: 1. the factorization theorem in perturbative QCD and helicity asymmetries in inclusive processes, 2. the effect of higher order radiative corrections on helicity asymmetries, 3. the higher order power mechanism and spin asymmetries, 4. difficulties in understanding transverse spin in perturbative QCD, 5. helicity asymmetries of short distances as a means of recognizing supersymmetric interactions. Experiments are suggested for the verification of theoretical conclusions. Although spin-physics at short distances is difficult to demonstrate experimentally it may provide a valuable tool to show how perturbative QCD operates in the presence of the non-perturbative hadronic structure. It may also prove valuable to show new interactions which might occur at very short distances

  15. Our path to better science in less time using open data science tools.

    Science.gov (United States)

    Lowndes, Julia S Stewart; Best, Benjamin D; Scarborough, Courtney; Afflerbach, Jamie C; Frazier, Melanie R; O'Hara, Casey C; Jiang, Ning; Halpern, Benjamin S

    2017-05-23

    Reproducibility has long been a tenet of science but has been challenging to achieve-we learned this the hard way when our old approaches proved inadequate to efficiently reproduce our own work. Here we describe how several free software tools have fundamentally upgraded our approach to collaborative research, making our entire workflow more transparent and streamlined. By describing specific tools and how we incrementally began using them for the Ocean Health Index project, we hope to encourage others in the scientific community to do the same-so we can all produce better science in less time.

  16. On the mechanism of photocatalytic reactions with eosin Y

    Directory of Open Access Journals (Sweden)

    Michal Majek

    2014-04-01

    Full Text Available A combined spectroscopic, synthetic, and apparative study has allowed a more detailed mechanistic rationalization of several recently reported eosin Y-catalyzed aromatic substitutions at arenediazonium salts. The operation of rapid acid–base equilibria, direct photolysis pathways, and radical chain reactions has been discussed on the basis of pH, solvent polarity, lamp type, absorption properties, and quantum yields. Determination of the latter proved to be an especially valuable tool for the distinction between radical chain and photocatalytic reactions.

  17. Computer-controlled radiation monitoring system

    International Nuclear Information System (INIS)

    Homann, S.G.

    1994-01-01

    A computer-controlled radiation monitoring system was designed and installed at the Lawrence Livermore National Laboratory's Multiuser Tandem Laboratory (10 MV tandem accelerator from High Voltage Engineering Corporation). The system continuously monitors the photon and neutron radiation environment associated with the facility and automatically suspends accelerator operation if preset radiation levels are exceeded. The system has proved reliable real-time radiation monitoring over the past five years, and has been a valuable tool for maintaining personnel exposure as low as reasonably achievable

  18. Reasoning by analogy as an aid to heuristic theorem proving.

    Science.gov (United States)

    Kling, R. E.

    1972-01-01

    When heuristic problem-solving programs are faced with large data bases that contain numbers of facts far in excess of those needed to solve any particular problem, their performance rapidly deteriorates. In this paper, the correspondence between a new unsolved problem and a previously solved analogous problem is computed and invoked to tailor large data bases to manageable sizes. This paper outlines the design of an algorithm for generating and exploiting analogies between theorems posed to a resolution-logic system. These algorithms are believed to be the first computationally feasible development of reasoning by analogy to be applied to heuristic theorem proving.

  19. Biomanipulation - a tool in marine ecosystem management and restoration?

    DEFF Research Database (Denmark)

    Lindegren, Martin; Möllmann, Christian; Hansson, Lars-Anders

    2010-01-01

    Widespread losses of production and conservation values make large-scale ecosystem restoration increasingly urgent. Ecological restoration by means of biomanipulation, i.e., by fishing out planktivores as to reduce the predation pressure on herbivorous zooplankton, has proven an effective tool...... in restoring degraded lakes and coastal ecosystems. Whether biomanipulation may prove a useful restoration method in open and structurally complex marine ecosystems is however still unknown. To promote a recovery of the collapsed stock of Eastern Baltic cod (Gadus morhua), large-scale biomanipulation of sprat...

  20. A New Tool for Effective and Efficient Project Management

    Energy Technology Data Exchange (ETDEWEB)

    Willett, Jesse A [Washington State Univ., Pullman, WA (United States)

    2011-12-01

    Organizations routinely handle thousands of projects per year, and it is difficult to manage all these projects concurrently. Too often, projects do not get the attention they need when they need it. Management inattention can lead to late projects or projects with less than desirable content and/or deliverables. This paper discusses the application of Visual Project Management (VPM) as a method to track and manage projects. The VPM approach proved to be a powerful management tool without the overhead and restrictions of traditional management methods.

  1. Anthraquinones As Pharmacological Tools and Drugs.

    Science.gov (United States)

    Malik, Enas M; Müller, Christa E

    2016-07-01

    Anthraquinones (9,10-dioxoanthracenes) constitute an important class of natural and synthetic compounds with a wide range of applications. Besides their utilization as colorants, anthraquinone derivatives have been used since centuries for medical applications, for example, as laxatives and antimicrobial and antiinflammatory agents. Current therapeutic indications include constipation, arthritis, multiple sclerosis, and cancer. Moreover, biologically active anthraquinones derived from Reactive Blue 2 have been utilized as valuable tool compounds for biochemical and pharmacological studies. They may serve as lead structures for the development of future drugs. However, the presence of the quinone moiety in the structure of anthraquinones raises safety concerns, and anthraquinone laxatives have therefore been under critical reassessment. This review article provides an overview of the chemistry, biology, and toxicology of anthraquinones focusing on their application as drugs. © 2016 Wiley Periodicals, Inc.

  2. Process simulation of heavy water plants - a powerful analytical tool

    International Nuclear Information System (INIS)

    Miller, A.I.

    1978-10-01

    The commercially conscious designs of Canadian GS (Girdler-Sulphide) have proved sensitive to process conditions. That, combined with the large scale of our units, has meant that computer simulation of their behaviour has been a natural and profitable development. Atomic Energy of Canada Limited has developed a family of steady state simulations to describe all of the Canadian plants. Modelling of plant conditions has demonstrated that the simulation description is very precise and it has become an integral part of the industry's assessments of both plant operation and decisions on capital expenditures. The simulation technique has also found extensive use in detailed designing of both the rehabilitated Glace Bay and the new La Prade plants. It has opened new insights into plant design and uncovered a radical and significant flowsheet change for future designs as well as many less dramatic but valuable lesser changes. (author)

  3. The Graphics Tablet - A Valuable Tool for the Digital STEM Teacher

    Science.gov (United States)

    Stephens, Jeff

    2018-04-01

    I am inspired to write this article after coming across some publications in The Physics Teacher that all hit on topics of personal interest and experience. Similarly to Christensen my goal in writing this is to encourage other physics educators to take advantage of modern technology in delivering content to students and to feel comfortable doing so. There are numerous ways in which to create screencasts and lecture videos, some of which have been addressed in other articles. I invite those interested in learning how to create these videos to contact their educational technology staff or perform some internet searches on the topic. I will focus this article on the technology that enhanced the content I was delivering to my students. I will share a bit of my journey towards creating video materials and introduce a vital piece of technology, the graphics tablet, which changed the way I communicate with my students.

  4. Is sdLDL a valuable screening tool for cardiovascular disease in ...

    African Journals Online (AJOL)

    Many patients with cardiovascular disease have their low density lipoprotein cholesterol within normal range. This raises the question about the most important lipoprotein to use as a marker of atherogenecity. In fact, small dense low density lipoprotein has recently been suggested as a strong predictor of cardiovascular ...

  5. Is sdLDL a valuable screening tool for cardiovascular disease in ...

    African Journals Online (AJOL)

    Radwa Momtaz Abdelsamie Zaki Khalil

    Lipoprotein Cholesterol; LDL I, large buoyant LDL; LDL II, intermediate density LDL; LDL III, smaller dense LDL; .... triglycerides >_150 mg, high density lipoprotein (HDL) <40 mg/dl in men ... sion of phenotype B.4,12 For a given triglyceride level, women were .... that sdLDL /LDL ratio is a very strong predictor of CHD in men;.

  6. The Graphics Tablet--A Valuable Tool for the Digital STEM Teacher

    Science.gov (United States)

    Stephens, Jeff

    2018-01-01

    I am inspired to write this article after coming across some publications in "The Physics Teacher" that all hit on topics of personal interest and experience. Similarly to Christensen my goal in writing this is to encourage other physics educators to take advantage of modern technology in delivering content to students and to feel…

  7. Electronic health records: a valuable tool for dental school strategic planning.

    Science.gov (United States)

    Filker, Phyllis J; Cook, Nicole; Kodish-Stav, Jodi

    2013-05-01

    The objective of this study was to investigate if electronic patient records have utility in dental school strategic planning. Electronic health records (EHRs) have been used by all predoctoral students and faculty members at Nova Southeastern University's College of Dental Medicine (NSU-CDM) since 2006. The study analyzed patient demographic and caries risk assessment data from October 2006 to May 2011 extracted from the axiUm EHR database. The purpose was to determine if there was a relationship between high oral health care needs and patient demographics, including gender, age, and median income of the zip code where they reside in order to support dental school strategic planning including the locations of future satellite clinics. The results showed that about 51 percent of patients serviced by the Broward County-based NSU-CDM oral health care facilities have high oral health care needs and that about 60 percent of this population resides in zip codes where the average income is below the median income for the county ($41,691). The results suggest that EHR data can be used adjunctively by dental schools when proposing potential sites for satellite clinics and planning for future oral health care programming.

  8. PCR methodology as a valuable tool for identification of endodontic pathogens.

    Science.gov (United States)

    Siqueira, José F; Rôças, Isabela N

    2003-07-01

    This paper reviews the principles of polymerase chain reaction (PCR) methodology, its application in identification of endodontic pathogens and the perspectives regarding the knowledge to be reached with the use of this highly sensitive, specific and accurate methodology as a microbial identification test. Studies published in the medical, dental and biological literature. Evaluation of published epidemiological studies examining the endodontic microbiota through PCR methodology. PCR technology has enabled the detection of bacterial species that are difficult or even impossible to culture as well as cultivable bacterial strains showing a phenotypically divergent or convergent behaviour. Moreover, PCR is more rapid, much more sensitive, and more accurate when compared with culture. Its use in endodontics to investigate the microbiota associated with infected root canals has expanded the knowledge on the bacteria involved in the pathogenesis of periradicular diseases. For instance, Tannerella forsythensis (formerly Bacteroides forsythus), Treponema denticola, other Treponema species, Dialister pneumosintes, and Prevotella tannerae were detected in infected root canals for the first time and in high prevalence when using PCR analysis. The diversity of endodontic microbiota has been demonstrated by studies using PCR amplification, cloning and sequencing of the PCR products. Moreover, other fastidious bacterial species, such as Porphyromonas endodontalis, Porphyromonas gingivalis and some Eubacterium spp., have been reported in endodontic infections at a higher prevalence than those reported by culture procedures.

  9. Virtual reality and live simulation: a comparison between two simulation tools for assessing mass casualty triage skills.

    Science.gov (United States)

    Luigi Ingrassia, Pier; Ragazzoni, Luca; Carenzo, Luca; Colombo, Davide; Ripoll Gallardo, Alba; Della Corte, Francesco

    2015-04-01

    This study tested the hypothesis that virtual reality simulation is equivalent to live simulation for testing naive medical students' abilities to perform mass casualty triage using the Simple Triage and Rapid Treatment (START) algorithm in a simulated disaster scenario and to detect the improvement in these skills after a teaching session. Fifty-six students in their last year of medical school were randomized into two groups (A and B). The same scenario, a car accident, was developed identically on the two simulation methodologies: virtual reality and live simulation. On day 1, group A was exposed to the live scenario and group B was exposed to the virtual reality scenario, aiming to triage 10 victims. On day 2, all students attended a 2-h lecture on mass casualty triage, specifically the START triage method. On day 3, groups A and B were crossed over. The groups' abilities to perform mass casualty triage in terms of triage accuracy, intervention correctness, and speed in the scenarios were assessed. Triage and lifesaving treatment scores were assessed equally by virtual reality and live simulation on day 1 and on day 3. Both simulation methodologies detected an improvement in triage accuracy and treatment correctness from day 1 to day 3 (PVirtual reality simulation proved to be a valuable tool, equivalent to live simulation, to test medical students' abilities to perform mass casualty triage and to detect improvement in such skills.

  10. Transformed hairy roots of Discaria trinervis: a valuable tool for studying actinorhizal symbiosis in the context of intercellular infection.

    Science.gov (United States)

    Imanishi, Leandro; Vayssières, Alice; Franche, Claudine; Bogusz, Didier; Wall, Luis; Svistoonoff, Sergio

    2011-11-01

    Among infection mechanisms leading to root nodule symbiosis, the intercellular infection pathway is probably the most ancestral but also one of the least characterized. Intercellular infection has been described in Discaria trinervis, an actinorhizal plant belonging to the Rosales order. To decipher the molecular mechanisms underlying intercellular infection with Frankia bacteria, we set up an efficient genetic transformation protocol for D. trinervis based on Agrobacterium rhizogenes. We showed that composite plants with transgenic roots expressing green fluorescent protein can be specifically and efficiently nodulated by Frankia strain BCU110501. Nitrogen fixation rates and feedback inhibition of nodule formation by nitrogen were similar in control and composite plants. In order to challenge the transformation system, the MtEnod11 promoter, a gene from Medicago truncatula widely used as a marker for early infection-related symbiotic events in model legumes, was introduced in D. trinervis. MtEnod11::GUS expression was related to infection zones in root cortex and in the parenchyma of the developing nodule. The ability to study intercellular infection with molecular tools opens new avenues for understanding the evolution of the infection process in nitrogen-fixing root nodule symbioses.

  11. Visualizing Our Options for Coastal Places: Exploring Realistic Immersive Geovisualizations as Tools for Inclusive Approaches to Coastal Planning and Management

    Directory of Open Access Journals (Sweden)

    Robert Newell

    2017-09-01

    Full Text Available Effective coastal planning is inclusive and incorporates the variety of user needs, values and interests associated with coastal environments. Realistic, immersive geographic visualizations, i.e., geovisualizations, can serve as potentially powerful tools for facilitating such planning because they can provide diverse groups with vivid understandings of how they would feel about certain management outcomes or impacts if transpired in real places. However, the majority of studies in this area have focused on terrestrial environments, and research on applications of such tools in the coastal and marine contexts is in its infancy. The current study aims to advance such research by examining the potential a land-to-sea geovisualization has to serve as a tool for inclusive coastal planning efforts. The research uses Sidney Spit Park (BC, Canada as a study site, and a realistic, dynamic geovisualization of the park was developed (using Unity3D that allows users to interact with and navigate it through the first-person perspective. Management scenarios were developed based on discussions with Parks Canada, and these scenarios included fencing around vegetation areas, positioning of mooring buoys, and management of dog activity within the park. Scenarios were built into the geovisualization in a manner that allows users to toggle different options. Focus groups were then assembled, involving residents of the Capital Regional District (BC, Canada, and participants explored and provided feedback on the scenarios. Findings from the study demonstrate the geovisualization's usefulness for assessing certain qualities of scenarios, such as aesthetics and functionality of fencing options and potential viewshed impacts associated with different mooring boat locations. In addition, the study found that incorporating navigability into the geovisualization proved to be valuable for understanding scenarios that hold implications for the marine environment due to

  12. DIDADTIC TOOLS FOR THE STUDENTS’ ALGORITHMIC THINKING DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    T. P. Pushkaryeva

    2017-01-01

    Full Text Available Introduction. Modern engineers must possess high potential of cognitive abilities, in particular, the algorithmic thinking (AT. In this regard, the training of future experts (university graduates of technical specialities has to provide the knowledge of principles and ways of designing of various algorithms, abilities to analyze them, and to choose the most optimal variants for engineering activity implementation. For full formation of AT skills it is necessary to consider all channels of psychological perception and cogitative processing of educational information: visual, auditory, and kinesthetic.The aim of the present research is theoretical basis of design, development and use of resources for successful development of AT during the educational process of training in programming.Methodology and research methods. Methodology of the research involves the basic thesis of cognitive psychology and information approach while organizing the educational process. The research used methods: analysis; modeling of cognitive processes; designing training tools that take into account the mentality and peculiarities of information perception; diagnostic efficiency of the didactic tools. Results. The three-level model for future engineers training in programming aimed at development of AT skills was developed. The model includes three components: aesthetic, simulative, and conceptual. Stages to mastering a new discipline are allocated. It is proved that for development of AT skills when training in programming it is necessary to use kinesthetic tools at the stage of mental algorithmic maps formation; algorithmic animation and algorithmic mental maps at the stage of algorithmic model and conceptual images formation. Kinesthetic tools for development of students’ AT skills when training in algorithmization and programming are designed. Using of kinesthetic training simulators in educational process provide the effective development of algorithmic style of

  13. The Internet Game Use-Elicited Symptom Screen proved to be a valid tool for adolescents aged 10-19 years.

    Science.gov (United States)

    Jo, Sun-Jin; Yim, Hyeon Woo; Lee, Hae-Kook; Lee, Hyung Cho; Choi, Jung-Seok; Baek, Kyung-Young

    2018-03-01

    This study tested the diagnostic validity of the nine-item Internet Game Use-Elicited Symptom Screen (IGUESS) tool, which was developed by the authors after the Diagnostic and Statistical Manual of Mental Disorders, fifth edition, identified Internet gaming as a condition that needed further study. A self-report screening test comprising IGUESS and Young's Internet Addiction Test was administered to 121 adolescents (74% boys) with a median age of 14 (range 10-19) recruited from school and health settings in Korea. After the screening test, a clinician conducted one-to-one interviews with all of the subjects to set a gold standard for diagnosis. The sensitivity and specificity of IGUESS were 87.0 and 86.7%, respectively, for a cut-off score of 10 points, with an area under the curve value of 0.93. Its reliability, as determined by Cronbach's alpha, was 0.94, and the correlation coefficient between IGUESS and Young's Internet Addiction Test was r = 0.902. The findings suggest that a cut-off score of 10 is appropriate for administering the IGUESS in various community-based settings, including schools, to screen for potential subjects in need of further assessment for Internet gaming problems. ©2017 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

  14. New software tools for enhanced precision in robot-assisted laser phonomicrosurgery.

    Science.gov (United States)

    Dagnino, Giulio; Mattos, Leonardo S; Caldwell, Darwin G

    2012-01-01

    This paper describes a new software package created to enhance precision during robot-assisted laser phonomicrosurgery procedures. The new software is composed of three tools for camera calibration, automatic tumor segmentation, and laser tracking. These were designed and developed to improve the outcome of this demanding microsurgical technique, and were tested herein to produce quantitative performance data. The experimental setup was based on the motorized laser micromanipulator created by Istituto Italiano di Tecnologia and the experimental protocols followed are fully described in this paper. The results show the new tools are robust and effective: The camera calibration tool reduced residual errors (RMSE) to 0.009 ± 0.002 mm under 40× microscope magnification; the automatic tumor segmentation tool resulted in deep lesion segmentations comparable to manual segmentations (RMSE= 0.160 ± 0.028 mm under 40× magnification); and the laser tracker tool proved to be reliable even during cutting procedures (RMSE= 0.073 ± 0.023 mm under 40× magnification). These results demonstrate the new software package can provide excellent improvements to the previous microsurgical system, leading to important enhancements in surgical outcome.

  15. Tool life of ceramic wedges during precise turning of tungsten

    Directory of Open Access Journals (Sweden)

    Legutko Stanislaw

    2017-01-01

    Full Text Available Properties, application and machinability of tungsten and its alloys have been demonstrated. The comparison of the tool life and wear of the wedges made of SiAlON and whisker ceramics during the precise turning at different cutting parameters have been presented. The CNC lathe DMG CTX 310 Ecoline and tungsten of 99.7 % purity were used during the experiments. Only the wedge of whisker ceramics has proved to be sufficiently suitable and only for relatively low cutting speeds.

  16. GOES-R Proving Ground Activities at the NASA Short-Term Prediction Research and Transition (SPoRT) Center

    Science.gov (United States)

    Molthan, Andrew

    2011-01-01

    SPoRT is actively involved in GOES-R Proving Ground activities in a number of ways: (1) Applying the paradigm of product development, user training, and interaction to foster interaction with end users at NOAA forecast offices national centers. (2) Providing unique capabilities in collaboration with other GOES-R Proving Ground partners (a) Hybrid GOES-MODIS imagery (b) Pseudo-GLM via regional lightning mapping arrays (c) Developing new RGB imagery from EUMETSAT guidelines

  17. Molecular tools for carotenogenesis analysis in the zygomycete Mucor circinelloides.

    Science.gov (United States)

    Torres-Martínez, Santiago; Ruiz-Vázquez, Rosa M; Garre, Victoriano; López-García, Sergio; Navarro, Eusebio; Vila, Ana

    2012-01-01

    The carotene producer fungus Mucor circinelloides is the zygomycete more amenable to genetic manipulations by using molecular tools. Since the initial development of an effective procedure of genetic transformation, more than two decades ago, the availability of new molecular approaches such as gene replacement techniques and gene expression inactivation by RNA silencing, in addition to the sequencing of its genome, has made Mucor a valuable organism for the study of a number of processes. Here we describe in detail the main techniques and methods currently used to manipulate M. circinelloides, including transformation, gene replacement, gene silencing, RNAi, and immunoprecipitation.

  18. How valuable is word of mouth?

    Science.gov (United States)

    Kumar, V; Petersen, J Andrew; Leone, Robert P

    2007-10-01

    The customers who buy the most from you are probably not your best marketers. What's more, your best marketers may be worth far more to your company than your most enthusiastic consumers. Those are the conclusions of professors Kumar and Petersen at the University of Connecticut and professor Leone at Ohio State University, who analyzed thousands of customers in research focused on a telecommunications company and a financial services firm. In this article, the authors present a straightforward tool that can be used to calculate both customer lifetime value (CLV), the worth of your customers' purchases, and customer referral value (CRV), the value of their referrals. Knowing both enables you to segment your customers into four constituent parts: those that buy a lot but are poor marketers (which they term Affluents); those that don't buy much but are very strong salespeople for your firm (Advocates); those that do both well (Champions); and those that do neither well (Misers). In a series of one-year experiments, the authors demonstrated the effectiveness of this segmentation approach. Offering purchasing incentives to Advocates, referral incentives to Affluents, and both to Misers, they were able to move significant proportions of all three into the Champions category. Both companies reaped returns on their marketing investments greater than 12-fold--more than double the normal marketing ROI for their industries. The power of this tool is its ability to help marketers decide where to focus their efforts. Rather than waste funds encouraging big spenders to spend slightly more while overlooking the power of customer evangelists who don't buy enough to seem important, you can reap much higher rewards by nudging big spenders to make referrals and urging enthusiastic proponents of your wares to buy a bit more.

  19. Germ cell transplantation using sexually competent fish: an approach for rapid propagation of endangered and valuable germlines.

    Directory of Open Access Journals (Sweden)

    Sullip K Majhi

    Full Text Available The transplantation of germ cells into adult recipient gonads is a tool with wide applications in animal breeding and conservation of valuable and/or endangered species; it also provides a means for basic studies involving germ cell (GC proliferation and differentiation. Here we describe the establishment of a working model for xenogeneic germ cell transplantation (GCT in sexually competent fish. Spermatogonial cells isolated from juveniles of one species, the pejerrey Odontesthes bonariensis (Atherinopsidae, were surgically transplanted into the gonads of sexually mature Patagonian pejerrey O. hatcheri, which have been partially depleted of endogenous GCs by a combination of Busulfan (40 mg/kg and high water temperature (25 degrees C treatments. The observation of the donor cells' behavior showed that transplanted spermatogonial cells were able to recolonize the recipients' gonads and resume spermatogenesis within 6 months from the GCT. The presence of donor-derived gametes was confirmed by PCR in 20% of the surrogate O. hatcheri fathers at 6 months and crosses with O. bonariensis mothers produced hybrids and pure O. bonariensis, with donor-derived germline transmission rates of 1.2-13.3%. These findings indicate that transplantation of spermatogonial cells into sexually competent fish can shorten considerably the production time of donor-derived gametes and offspring and could play a vital role in germline conservation and propagation of valued and/or endangered fish species.

  20. Safety-barrier diagrams as a tool for modelling safety of hydrogen applications

    DEFF Research Database (Denmark)

    Duijm, Nijs Jan; Markert, Frank

    2009-01-01

    Safety-barrier diagrams have proven to be a useful tool in documenting the safety measures taken to prevent incidents and accidents in process industry. Especially during the introduction of new hydrogen technologies or applications, as e.g. hydrogen refuelling stations, safety-barrier diagrams...... are considered a valuable supplement to other traditional risk analysis tools to support the communication with authorities and other stakeholders during the permitting process. Another advantage of safety-barrier diagrams is that they highlight the importance of functional and reliable safety barriers in any...... system and here is a direct focus on those barriers that need to be subject to safety management in terms of design and installation, operational use, inspection and monitoring, and maintenance. Safety-barrier diagrams support both quantitative and qualitative approaches. The paper will describe...

  1. HC StratoMineR: A Web-Based Tool for the Rapid Analysis of High-Content Datasets.

    Science.gov (United States)

    Omta, Wienand A; van Heesbeen, Roy G; Pagliero, Romina J; van der Velden, Lieke M; Lelieveld, Daphne; Nellen, Mehdi; Kramer, Maik; Yeong, Marley; Saeidi, Amir M; Medema, Rene H; Spruit, Marco; Brinkkemper, Sjaak; Klumperman, Judith; Egan, David A

    2016-10-01

    High-content screening (HCS) can generate large multidimensional datasets and when aligned with the appropriate data mining tools, it can yield valuable insights into the mechanism of action of bioactive molecules. However, easy-to-use data mining tools are not widely available, with the result that these datasets are frequently underutilized. Here, we present HC StratoMineR, a web-based tool for high-content data analysis. It is a decision-supportive platform that guides even non-expert users through a high-content data analysis workflow. HC StratoMineR is built by using My Structured Query Language for storage and querying, PHP: Hypertext Preprocessor as the main programming language, and jQuery for additional user interface functionality. R is used for statistical calculations, logic and data visualizations. Furthermore, C++ and graphical processor unit power is diffusely embedded in R by using the rcpp and rpud libraries for operations that are computationally highly intensive. We show that we can use HC StratoMineR for the analysis of multivariate data from a high-content siRNA knock-down screen and a small-molecule screen. It can be used to rapidly filter out undesirable data; to select relevant data; and to perform quality control, data reduction, data exploration, morphological hit picking, and data clustering. Our results demonstrate that HC StratoMineR can be used to functionally categorize HCS hits and, thus, provide valuable information for hit prioritization.

  2. Validation of three tools for identifying painful new osteoporotic vertebral fractures in older Chinese men: bone mineral density, Osteoporosis Self-Assessment Tool for Asians, and fracture risk assessment tool.

    Science.gov (United States)

    Lin, JiSheng; Yang, Yong; Fei, Qi; Zhang, XiaoDong; Ma, Zhao; Wang, Qi; Li, JinJun; Li, Dong; Meng, Qian; Wang, BingQiang

    2016-01-01

    This cross-sectional study compared three tools for predicting painful new osteoporotic vertebral fractures (PNOVFs) in older Chinese men: bone mineral density (BMD), the Osteoporosis Self-Assessment Tool for Asians (OSTA), and the World Health Organization fracture risk assessment tool (FRAX) (without BMD). Men aged ≥50 years were apportioned to a group for men with fractures who had undergone percutaneous vertebroplasty (n=111), or a control group of healthy men (n=385). Fractures were verified on X-ray and magnetic resonance imaging. BMD T-scores were determined by dual energy X-ray absorptiometry. Diagnosis of osteoporosis was determined by a BMD T-score of ≤2.5 standard deviations below the average for a young adult at peak bone density at the femoral neck, total hip, or L1-L4. Demographic and clinical risk factor data were self-reported through a questionnaire. BMD, OSTA, and FRAX scores were assessed for identifying PNOVFs via receiver-operating characteristic (ROC) curves. Optimal cutoff points, sensitivity, specificity, and areas under the ROC curves (AUCs) were determined. Between the men with fractures and the control group, there were significant differences in BMD T-scores (at femoral neck, total hip, and L1-L4), and OSTA and FRAX scores. In those with fractures, only 53.15% satisfied the criteria for osteoporosis. Compared to BMD or OSTA, the FRAX score had the best predictive value for PNOVFs: the AUC of the FRAX score (cutoff =2.9%) was 0.738, and the sensitivity and specificity were 82% and 62%, respectively. FRAX may be a valuable tool for identifying PNOVFs in older Chinese men.

  3. Depleted uranium risk assessment at Aberdeen Proving Ground

    International Nuclear Information System (INIS)

    Ebinger, M.H.; Myers, O.B.; Kennedy, P.L.; Clements, W.H.

    1993-01-01

    The Environmental Science Group at Los Alamos and the Test and Evaluation Command (TECOM) are assessing the risk of depleted uranium (DU) testing at Aberdeen Proving Ground (APG). Conceptual and mathematical models of DU transfer through the APG ecosystem have been developed in order to show the mechanisms by which DU migrates or remains unavailable to different flora and fauna and to humans. The models incorporate actual rates of DU transfer between different ecosystem components as much as possible. Availability of data on DU transport through different pathways is scarce and constrains some of the transfer rates that can be used. Estimates of transfer rates were derived from literature sources and used in the mass-transfer models when actual transfer rates were unavailable. Objectives for this risk assessment are (1) to assess if DU transports away from impact areas; (2) to estimate how much, if any, DU migrates into Chesapeake Bay; (3) to determine if there are appreciable risks to the ecosystems due to DU testing; (4) to estimate the risk to human health as a result of DU testing

  4. Identification of small molecule inhibitors of phosphatidylinositol 3-kinase and autophagy

    DEFF Research Database (Denmark)

    Farkas, Thomas; Daugaard, Mads; Jaattela, Marja

    2011-01-01

    Macroautophagy (hereafter autophagy) is a lysosomal catabolic pathway that controls cellular homeostasis and survival. It has recently emerged as an attractive target for the treatment of a variety of degenerative diseases and cancer. The targeting of autophagy has, however, been hampered...... for effective autophagy inhibition. Accordingly, they proved to be valuable tools for investigations of autophagy-associated cell death and survival. Employing KU55399, we demonstrated that autophagy protects amino acid-starved cells against both apoptosis and necroptosis. Taken together, our data introduce new...

  5. Kerr geometry in f(T) gravity

    OpenAIRE

    Bejarano, Cecilia; Ferraro, Rafael; Guzmán, María José

    2014-01-01

    Null tetrads are shown to be a valuable tool in teleparallel theories of modified gravity. We use them to prove that Kerr geometry remains a solution for a wide family of theories of gravity. Fil: Bejarano, Cecilia Soledad. Consejo Nacional de Investigaciónes Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Astronomía y Física del Espacio. - Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Astronomía y Fí...

  6. Concept of an integrated waste economy represented on the example of recycling of valuable materials

    Energy Technology Data Exchange (ETDEWEB)

    Wender, H

    1980-08-01

    The historical development of waste elimination is discussed, followed by the waste problem in an environmental discussion, the possibilities of recycling within the framework of a waste industry, and the solution of the waste problem from a waste-economy viewpoint, including the definition of 'waste' and the grouping by types of waste, their amounts and increase rates, composition and valuable materials in community wastes with a review of waste technologies under waste-economy viewpoints. This is followed by a discussion of the sales possibilities for valuable components from mechanical sorting facilities, including used paper, old glass, hard substances, metals, plastics, succeeded by a comparative evaluation method, and the national economy aspect of the waste industry, with the savings effect in raw materials for different branches, effects on raw material reserves, the problem of dependence on imports, waste rates and living standard, and the importance of environmental instruments which are discussed in detail.

  7. Carbon Footprint Estimation Tool for Residential Buildings for Non-Specialized Users: OERCO2 Project

    Directory of Open Access Journals (Sweden)

    Jaime Solís-Guzmán

    2018-04-01

    Full Text Available Existing tools for environmental certification of buildings are failing in their ability to reach the general public and to create social awareness, since they require not only specialized knowledge regarding construction and energy sources, but also environmental knowledge. In this paper, an open-source online tool for the estimation of the carbon footprint of residential buildings by non-specialized users is presented as a product from the OERCO2 Erasmus + project. The internal calculations, data management and operation of this tool are extensively explained. The ten most common building typologies built in the last decade in Spain are analysed by using the OERCO2 tool, and the order of magnitude of the results is analysed by comparing them to the ranges determined by other authors. The OERCO2 tool proves itself to be reliable, with its results falling within the defined logical value ranges. Moreover, the major simplification of the interface allows non-specialized users to evaluate the sustainability of buildings. Further research is oriented towards its inclusion in other environmental certification tools and in Building Information Modeling (BIM environments.

  8. Rethinking health systems strengthening: key systems thinking tools and strategies for transformational change.

    Science.gov (United States)

    Swanson, R Chad; Cattaneo, Adriano; Bradley, Elizabeth; Chunharas, Somsak; Atun, Rifat; Abbas, Kaja M; Katsaliaki, Korina; Mustafee, Navonil; Mason Meier, Benjamin; Best, Allan

    2012-10-01

    While reaching consensus on future plans to address current global health challenges is far from easy, there is broad agreement that reductionist approaches that suggest a limited set of targeted interventions to improve health around the world are inadequate. We argue that a comprehensive systems perspective should guide health practice, education, research and policy. We propose key 'systems thinking' tools and strategies that have the potential for transformational change in health systems. Three overarching themes span these tools and strategies: collaboration across disciplines, sectors and organizations; ongoing, iterative learning; and transformational leadership. The proposed tools and strategies in this paper can be applied, in varying degrees, to every organization within health systems, from families and communities to national ministries of health. While our categorization is necessarily incomplete, this initial effort will provide a valuable contribution to the health systems strengthening debate, as the need for a more systemic, rigorous perspective in health has never been greater.

  9. (Re)interpreting LHC New Physics Search Results : Tools and Methods, 3rd Workshop

    CERN Document Server

    The quest for new physics beyond the SM is arguably the driving topic for LHC Run2. LHC collaborations are pursuing searches for new physics in a vast variety of channels. Although collaborations provide various interpretations for their search results, the full understanding of these results requires a much wider interpretation scope involving all kinds of theoretical models. This is a very active field, with close theory-experiment interaction. In particular, development of dedicated methodologies and tools is crucial for such scale of interpretation. Recently, a Forum was initiated to host discussions among LHC experimentalists and theorists on topics related to the BSM (re)interpretation of LHC data, and especially on the development of relevant interpretation tools and infrastructure: https://twiki.cern.ch/twiki/bin/view/LHCPhysics/InterpretingLHCresults Two meetings were held at CERN, where active discussions and concrete work on (re)interpretation methods and tools took place, with valuable cont...

  10. The tools for evaluating logistics processes

    Directory of Open Access Journals (Sweden)

    Michał Adamczak

    2013-12-01

    Full Text Available Background: The growing importance of business process approach and dynamic management is triggered by market expectations for lead time reductions and the pressure for cost cuts. An efficient process management requires measurement and assessment skills. This article is intended to present the tools used in evaluating processes and the way in which they work together under simulated conditions. Methods: The project's Authors believe that a process can be assessed by measuring its attributes: cost, time and quality. An assessment tool has been developed for each of those attributes. For costs - it could be activity based costing, for time - value stream mapping; for quality - statistical process control. Each tool allows for evaluating one of the attributes, any element in the process hierarchy. The methods presented in the paper have been supplemented with process modelling and simulation. Results: In order to show how process assessment tools are combined with process simulation the Authors show a sample process in three versions (serial, parallel and mixed. A variant simulation (using iGrafx software allows for determining the values of attributes in the entire process based on the data set for its components (activities. In the example under investigation the process variant has no impact on its quality. Process cost and time are affected. Conclusions: The tools for identifying attribute values, in combination with process modelling and simulation, can prove very beneficial when applied in business practice. In the first place they allow for evaluating a process based on the value of the attributes pertaining to its particular activities, which, on the other hand, raises the possibility of process configuration at the design stage. The solution presented in the paper can be developed further with a view to process standardization and best variant recommendation.  

  11. HISTORY AND WAYS OF FOUNDATION OF THE FUNDS OF VALUABLE AND RARE LITERATURE OF NATIONAL UNIVERSITY OF WATER AND ENVIROMENTAL ENGINEERING

    Directory of Open Access Journals (Sweden)

    А. В. Крива

    2017-10-01

    Full Text Available Fund of valuable and rare literature of the Scientific Library of National University of Water and Environmental Engineering enrols more than four thousand copies. The basis for its acquisition is the principle of general cultural, scientific and aesthetic significance. This fund is completed with all categories and types of national and foreign publications. It is also fulfilled with documents that have gained the status of unique sources and is related to the history of the university, and with directions of the corresponding profile of training of specialists in educational and research institution. According to the chronological principle, the fund of valuable and rare literature includes documents issued before 1945 and earlier. There are bookshops which reflect the history of the development of national and foreign science and technology and are reasonably valuable both for scientists and students. Here can be distinguished: unique book editions; separate courses in technical disciplines; multi-volume collections of scientific works; rare 19th-century textbooks; works of domestic and world classics of science and technology, as well as dictionaries and reference publications. The fund is arranged in a systematic alphabetical system. For the individual account of valuable and rare literature, “Card of rare and valuable documents” is conducted. The composition of the fund, as it receives, is displayed in the electronic catalog of the library. Recently, you can also read publications in the public repository of the educational institution.

  12. Web service tools in the era of forest fire management and elimination

    Science.gov (United States)

    Poursanidis, Dimitris; Kochilakis, Giorgos; Chrysoulakis, Nektarios; Varella, Vasiliki; Kotroni, Vassiliki; Eftychidis, Giorgos; Lagouvardos, Kostas

    2014-10-01

    Wildfires in forests and forested areas in South Europe, North America, Central Asia and Australia are a diachronic threat with crucial ecological, economic and social impacts. Last decade the frequency, the magnitude and the intensity of fires have increased even more because of the climate change. An efficient response to such disasters requires an effective planning, with an early detection system of the ignition area and an accurate prediction of fire propagation to support the rapid response mechanisms. For this reason, information systems able to predict and visualize the behavior of fires, are valuable tools for fire fighting. Such systems, able also to perform simulations that evaluate the fire development scenarios, based on weather conditions, become valuable Decision Support Tools for fire mitigation planning. A Web-based Information System (WIS) developed in the framework of the FLIRE (Floods and fire risk assessment and management) project, a LIFE+ co-funded by the European Commission research, is presented in this study. The FLIRE WIS use forest fuel maps which have been developed by using generalized fuel maps, satellite data and in-situ observations. Furthermore, it leverages data from meteorological stations and weather forecast from numerical models to feed the fire propagation model with the necessary for the simulations inputs and to visualize the model's results for user defined time periods and steps. The user has real-time access to FLIRE WIS via any web browser from any platform (PC, Laptop, Tablet, Smartphone).

  13. a Test to Prove Cloud Whitening THEORY!

    Science.gov (United States)

    Buttram, J. W.

    2011-12-01

    Climate science researchers believe our planet can possibly tolerate twice the present carbon dioxide levels with no upwards temperature change, IF we could increase the amount of energy reflected back out into space by about 2.0%. (c)Cloudtec basically alters a blend of seawater and applies heat derived from magma to it at a temperature exceeding 2,000 degrees F. The interaction of seawater and magma displaces the oxygen, causing the volume of water to vaporize and expand over 4,000 times - transforming billions of tons of seawater into thousands of cubic miles of white, maritime, stratocumulus clouds to reflect the incident Sun's rays back out into space. A 6 month test to prove Cloud Whitening Theory will cost 6 million dollars. (No profit added.) This study will enable everyone on the planet with a computer the transparency to use satellite imagery and check out for themselves - if and when Cloud Whitening is occurring. If Cloud Whitening Theory is validated, (c)Cloudtec's innovation can strategically create the clouds we need to reflect the Sun's rays back out into space and help neutralize the projected 3.6 degrees F rise in temperature. Based on reasonable calculations of anthropogenic global warming: this one move alone would be comparable to slashing global carbon dioxide emissions by over 60% over the next 40 years.

  14. Current technologies and new insights for the recovery of high valuable compounds from fruits by-products.

    Science.gov (United States)

    Ferrentino, Giovanna; Asaduzzaman, Md; Scampicchio, Matteo Mario

    2018-02-11

    The recovery of high valuable compounds from food waste is becoming a tighten issue in food processing. The large amount of non-edible residues produced by food industries causes pollution, difficulties in the management, and economic loss. The waste produced during the transformation of fruits includes a huge amount of materials such as peels, seeds, and bagasse, whose disposal usually represents a problem. Research over the past 20 years revealed that many food wastes could serve as a source of potentially valuable bioactive compounds, such as antioxidants and vitamins with increasing scientific interest thanks to their beneficial effects on human health. The challenge for the recovery of these compounds is to find the most appropriate and environment friendly extraction technique able to achieve the maximum extraction yield without compromising the stability of the extracted products. Based on this scenario, the aim of the current review is twofold. The first is to give a brief overview of the most important bioactive compounds occurring in fruit wastes. The second is to describe the pro and cons of the most up-to-dated innovative and environment friendly extraction technologies that can be an alternative to the classical solvent extraction procedures for the recovery of valuable compounds from fruit processing. Furthermore, a final section will take into account published findings on the combination of some of these technologies to increase the extracts yields of bioactives.

  15. Knowledge Based Product Configuration - a documentatio tool for configuration projects

    DEFF Research Database (Denmark)

    Hvam, Lars; Malis, Martin

    2003-01-01

    . A lot of knowledge isput into these systems and many domain experts are involved. This calls for an effective documentation system in order to structure this knowledge in a way that fits to the systems. Standard configuration systems do not support this kind of documentation. The chapter deals...... with the development of a Lotus Notes application that serves as a knowledge based documentation tool for configuration projects. A prototype has been developed and tested empirically in an industrial case-company. It has proved to be a succes....

  16. Assessing the quality of websites providing information on multiple sclerosis: evaluating tools and comparing sites.

    Science.gov (United States)

    Harland, Juliet; Bath, Peter

    2007-09-01

    The quality of health information available on the Internet has proved difficult to assess objectively. The Internet's growing popularity as a source of health information, accompanied by the lack of regulation of websites, has resulted in research that has developed and tested tools to evaluate health website quality. However, only a few studies have tested the validity and reliability of these tools. There is a lack of consensus about appropriate indicators with which to operationalize the concept of quality health information. This study aimed to contribute to this research by testing the validity and reliability of existing tools, through their application to websites that provided information about multiple sclerosis. Furthermore, a specific tool for evaluating multiple sclerosis information was developed, contributing to the debate about suitable criteria for measuring the ;quality' of health information on the web.

  17. The Secret Prover : Proving Possession of Arbitrary Files While not Giving Them Away

    NARCIS (Netherlands)

    Teepe, Wouter

    2005-01-01

    The Secret Prover is a Java application which allows a user (A) to prove to another user (B), that A possesses a file. If B also possesses this file B will get convinced, and if B does not possess this file B will gain no information on (the contents of) this file. This is the first implementation

  18. Impact of cooking, proving, and baking on the (poly)phenol content of wild blueberry.

    Science.gov (United States)

    Rodriguez-Mateos, Ana; Cifuentes-Gomez, Tania; George, Trevor W; Spencer, Jeremy P E

    2014-05-07

    Accumulating evidence suggests that diets rich in (poly)phenols may have positive effects on human health. Currently there is limited information regarding the effects of processing on the (poly)phenolic content of berries, in particular in processes related to the baking industry. This study investigated the impact of cooking, proving, and baking on the anthocyanin, procyanidin, flavonol, and phenolic acid contents of wild blueberry using HPLC with UV and fluorescence detection. Anthocyanin levels decreased during cooking, proving, and baking, whereas no significant changes were observed for total procyanidins. However, lower molecular weight procyanidins increased and high molecular weight oligomers decreased during the process. Quercetin and ferulic and caffeic acid levels remained constant, whereas increases were found for chlorogenic acid. Due to their possible health benefits, a better understanding of the impact of processing is important to maximize the retention of these phytochemicals in berry-containing products.

  19. METHODOLODICAL TOOLS FOR ORGANIZING THE PROCESS OF STAFF1 SEARCH AND SELECTION

    Directory of Open Access Journals (Sweden)

    T. Bilorus

    2015-08-01

    Full Text Available The relevance and the basic stages to meet the demand in personnel in the contemporary economy were determined. The necessity and requirements for the formation of maps of competencies as tools for personnel selection were proved and generalized. The algorithm of choosing the sources of candidates search for the vacant position was developed. Practical recommendations of candidates selection procedure for the organization were provided using the method of “ideal point”.

  20. Audience Response Made Easy: Using Personal Digital Assistants as a Classroom Polling Tool

    Science.gov (United States)

    Menon, Anil S.; Moffett, Shannon; Enriquez, Melissa; Martinez, Miriam M.; Dev, Parvati; Grappone, Todd

    2004-01-01

    Both teachers and students benefit from an interactive classroom. The teacher receives valuable input about effectiveness, student interest, and comprehension, whereas student participation, active learning, and enjoyment of the class are enhanced. Cost and deployment have limited the use of existing audience response systems, allowing anonymous linking of teachers and students in the classroom. These limitations can be circumvented, however, by use of personal digital assistants (PDAs), which are cheaper and widely used by students. In this study, the authors equipped a summer histology class of 12 students with PDAs and wireless Bluetooth cards to allow access to a central server. Teachers displayed questions in multiple-choice format as a Web page on the server and students responded with their PDAs, a process referred to as polling. Responses were immediately compiled, analyzed, and displayed. End-of-class survey results indicated that students were enthusiastic about the polling tool. The surveys also provided technical feedback that will be valuable in streamlining future trials. PMID:14764615

  1. Conceptualizing reasoning-and-proving opportunities in textbook expositions : Cases from secondary calculus

    OpenAIRE

    Bergwall, Andreas

    2017-01-01

    Several recent textbook studies focus on opportunities to learn reasoning-and-proving. They typically investigate the extent to which justifications are general proofs and what opportunities exist for learning important elements of mathematical reasoning. In this paper, I discuss how a particular analytical framework for this might be refined. Based on an in-depth analysis of certain textbook passages in upper secondary calculus textbooks, I make an account for analytical issues encountered d...

  2. Early wound infection identification using the WIRE tool in community health care settings: An audit report.

    Science.gov (United States)

    Siaw-Sakyi, Vincent

    2017-12-01

    Wound infection is proving to be a challenge for health care professionals. The associated complications and cost of wound infection is immense and can lead to death in extreme cases. Current management of wound infection is largely subjective and relies on the knowledge of the health care professional to identify and initiate treatment. In response, we have developed an infection prediction and assessment tool. The Wound Infection Risk-Assessment and Evaluation tool (WIRE) and its management strategy is a tool with the aim to bring objectivity to infection prediction, assessment and management. A local audit carried out indicated a high infection prediction rate. More work is being done to improve its effectiveness.

  3. Radiolabelled parasite antigens as tools for diagnosis and identification of protective antigens

    International Nuclear Information System (INIS)

    Parkhouse, R.M.E.; Cabrera, Z.

    1986-01-01

    Radiolabelling specific compartments and molecules of parasites provides a valuable tool for establishing parasite antigen-host response systems with utility and/or importance in protection, diagnosis and pathology. The combined immunological, biochemical and molecular biological expertise currently available forms a sufficient basis for a relatively logical and effective programme directed towards the ultimate eradication of tropical diseases. The organization of carefully selected and clinically well characterized sera and patients, representing the range of commonly occurring parasitic infections, would be of great practical value in the pursuance of this goal. (author)

  4. GPLS VME Module: A Diagnostic and Display Tool for NSLS Micro Systems

    International Nuclear Information System (INIS)

    Ramamoorthy, S.; Smith, J. D.

    1999-01-01

    The General Purpose Light Source VME module is an integral part of every front-end micro in the NSLS control system. The board incorporates features such as a video character generator, clock signals, time-of-day clock, a VME bus interrupter and general-purpose digital inputs and outputs. This module serves as a valuable diagnostic and real-time display tool for the micro development as well as for the find operational systems. This paper describes the functions provided by the board for the NSLS micro control monitor software

  5. Animals as an indicator of carbon sequestration and valuable landscapes

    Directory of Open Access Journals (Sweden)

    Jan Szyszko

    2011-05-01

    Full Text Available Possibilities of the assessment of a landscape with the use of succession development stages, monitored with the value of the Mean Individual Biomass (MIB of carabid beetles and the occurrence of bird species are discussed on the basis of an example from Poland. Higher variability of the MIB value in space signifies a greater biodiversity. Apart from the variability of MIB, it is suggested to adopt the occurrence of the following animals as indicators, (in the order of importance, representing underlying valuable landscapes: black stork, lesser spotted eagle, white-tailed eagle, wolf, crane and white stork. The higher number of these species and their greater density indicate a higher value of the landscape for biodiversity and ecosystem services, especially carbon sequestration. All these indicators may be useful to assess measures for sustainable land use.

  6. AN ANALYSIS OF THE CAUSES OF PRODUCT DEFECTS USING QUALITY MANAGEMENT TOOLS

    Directory of Open Access Journals (Sweden)

    Katarzyna MIDOR

    2014-10-01

    Full Text Available To stay or strengthen its position on the market, a modern business needs to follow the principles of quality control in its actions. Especially important is the Zero Defects concept developed by Philip Crosby, which means flawless production. The concept consists in preventing the occurrence of defects and flaws in all production stages. To achieve that, we must, among other things, make use of quality management tools. This article presents an analysis of the reasons for the return of damaged or faulty goods in the automotive industry by means of quality management tools such as the Ishikawa diagram and Pareto analysis, which allow us to identify the causes of product defectiveness. Based on the results, preventive measures have been proposed. The actions presented in this article and the results of the analysis prove the effectiveness of the aforementioned quality management tools.

  7. Nanocapillary Atmospheric Pressure Plasma Jet: A Tool for Ultrafine Maskless Surface Modification at Atmospheric Pressure.

    Science.gov (United States)

    Motrescu, Iuliana; Nagatsu, Masaaki

    2016-05-18

    With respect to microsized surface functionalization techniques we proposed the use of a maskless, versatile, simple tool, represented by a nano- or microcapillary atmospheric pressure plasma jet for producing microsized controlled etching, chemical vapor deposition, and chemical modification patterns on polymeric surfaces. In this work we show the possibility of size-controlled surface amination, and we discuss it as a function of different processing parameters. Moreover, we prove the successful connection of labeled sugar chains on the functionalized microscale patterns, indicating the possibility to use ultrafine capillary atmospheric pressure plasma jets as versatile tools for biosensing, tissue engineering, and related biomedical applications.

  8. The Discovery Dome: A Tool for Increasing Student Engagement

    Science.gov (United States)

    Brevik, Corinne

    2015-04-01

    The Discovery Dome is a portable full-dome theater that plays professionally-created science films. Developed by the Houston Museum of Natural Science and Rice University, this inflatable planetarium offers a state-of-the-art visual learning experience that can address many different fields of science for any grade level. It surrounds students with roaring dinosaurs, fascinating planets, and explosive storms - all immersive, engaging, and realistic. Dickinson State University has chosen to utilize its Discovery Dome to address Earth Science education at two levels. University courses across the science disciplines can use the Discovery Dome as part of their curriculum. The digital shows immerse the students in various topics ranging from astronomy to geology to weather and climate. The dome has proven to be a valuable tool for introducing new material to students as well as for reinforcing concepts previously covered in lectures or laboratory settings. The Discovery Dome also serves as an amazing science public-outreach tool. University students are trained to run the dome, and they travel with it to schools and libraries around the region. During the 2013-14 school year, our Discovery Dome visited over 30 locations. Many of the schools visited are in rural settings which offer students few opportunities to experience state-of-the-art science technology. The school kids are extremely excited when the Discovery Dome visits their community, and they will talk about the experience for many weeks. Traveling with the dome is also very valuable for the university students who get involved in the program. They become very familiar with the science content, and they gain experience working with teachers as well as the general public. They get to share their love of science, and they get to help inspire a new generation of scientists.

  9. Molecular beacon – tool for real time studying gene activity in stem cells

    DEFF Research Database (Denmark)

    Ilieva, Mirolyuba; Dufva, Martin

    Cells respond to their internal genetic programs and external stimuli by modulating the synthesis of specific mRNAs. Direct observation of mRNA expression in living cells can provide valuable information with regards to understanding fundamental processes such cell differentiation, regeneration...... and cancerogenesis. Molecular beacon technology is based on fluorescence resonance energy transfer (FRET) and the complementary pairing principles. These fluorescent molecular probes are highly specific and sensitive and are one important tool in in vitro diagnostics. Here molecular beacons are used to follow...

  10. Recovery of valuable nitrogen compounds from agricultural liquid wastes: potential possibilities, bottlenecks and future technological challenges.

    NARCIS (Netherlands)

    Rulkens, W.H.; Klapwijk, A.; Willers, H.C.

    1998-01-01

    Agricultural liquid livestock wastes are an important potential source of valuable nitrogen-containing compounds such as ammonia and proteins. Large volumetric quantities of these wastes are produced in areas with a high livestock production density. Much technological research has been carried out

  11. Endophytes: exploitation as a tool in plant protection

    Directory of Open Access Journals (Sweden)

    Devanushi Dutta

    2014-10-01

    Full Text Available Endophytes are symptomless fungal or bacterial microorganisms found in almost all living plant species reported so far. They are the plant-associated microbes that form symbiotic association with their host plants by colonizing the internal tissues, which has made them valuable for agriculture as a tool in improving crop performance. Many fungal endophytes produce secondary metabolites such as auxin, gibberellin etc that helps in growth and development of the host plant. Some of these compounds are antibiotics having antifungal, antibacterial and insecticidal properties, which strongly inhibit the growth of other microorganisms, including plant pathogens. This article reviews the endophyte isolated from different plants, mode of endophytic infection and benefits derived by the host plant as a result of endophytism.

  12. Urban Health Indicator Tools of the Physical Environment: a Systematic Review.

    Science.gov (United States)

    Pineo, Helen; Glonti, Ketevan; Rutter, Harry; Zimmermann, Nici; Wilkinson, Paul; Davies, Michael

    2018-04-16

    Urban health indicator (UHI) tools provide evidence about the health impacts of the physical urban environment which can be used in built environment policy and decision-making. Where UHI tools provide data at the neighborhood (and lower) scale they can provide valuable information about health inequalities and environmental deprivation. This review performs a census of UHI tools and explores their nature and characteristics (including how they represent, simplify or address complex systems) to increase understanding of their potential use by municipal built environment policy and decision-makers. We searched seven bibliographic databases, four key journals and six practitioner websites and conducted Google searches between January 27, 2016 and February 24, 2016 for UHI tools. We extracted data from primary studies and online indicator systems. We included 198 documents which identified 145 UHI tools comprising 8006 indicators, from which we developed a taxonomy. Our taxonomy classifies the significant diversity of UHI tools with respect to topic, spatial scale, format, scope and purpose. The proportions of UHI tools which measure data at the neighborhood and lower scale, and present data via interactive maps, have both increased over time. This is particularly relevant to built environment policy and decision-makers, reflects growing analytical capability and offers the potential for improved understanding of the complexity of influences on urban health (an aspect noted as a particular challenge by some indicator producers). The relation between urban health indicators and health impacts attributable to modifiable environmental characteristics is often indirect. Furthermore, the use of UHI tools in policy and decision-making appears to be limited, thus raising questions about the continued development of such tools by multiple organisations duplicating scarce resources. Further research is needed to understand the requirements of built environment policy and

  13. Geophysics: Building E5481 decommissioning, Aberdeen Proving Ground

    International Nuclear Information System (INIS)

    Thompson, M.D.; McGinnis, M.G.; McGinnis, L.D.; Miller, S.F.

    1992-11-01

    Building E5481 is one of ten potentially contaminated sites in the Canal Creek and Westwood areas of the Edgewood section of Aberdeen Proving Ground examined by a geophysical team from Argonne National Laboratory in April and May of 1992. Noninvasive geophysical surveys, including magnetics, electrical resistivity, and ground-penetrating radar, were conducted around the perimeter of the building to guide a sampling program prior to decommissioning and dismantling. The building is located on the northern margin of a landfill that was sited in a wetland. The large number of magnetic sources surrounding the building are believed to be contained in construction fill that had been used to raise the grade. The smaller anomalies, for the most part, are not imaged with ground radar or by electrical profiling. A conductive zone trending northwest to southeast across the site is spatially related to an old roadbed. Higher resistivity areas in the northeast and east are probably representive of background values. Three high-amplitude, positive, rectangular magnetic anomalies have unknown sources. The features do not have equivalent electrical signatures, nor are they seen with radar imaging

  14. Geophysics: Building E5375 decommissioning, Aberdeen Proving Ground

    International Nuclear Information System (INIS)

    McGinnis, M.G.; McGinnis, L.D.; Miller, S.F.; Thompson, M.D.

    1992-08-01

    Building E5375 was one of ten potentially contaminated sites in the Canal Creek area of the Edgewood section of Aberdeen Proving Ground examined by a geophysical team from Argonne National Laboratory in April and May 1992. Noninvasive geophysical surveys, including magnetics, electrical resistivity, and ground-penetrating radar (GPR), were conducted around the perimeter of the building to guide a sampling program prior to decommissioning and dismantling. Several anomalies wear, noted: (1) An underground storage tank located 25 ft east of Building E5375 was identified with magnetic, resistivity, and GPR profiling. (2) A three-point resistivity anomaly, 12 ft east of the northeast comer of Building E5374 (which borders Building E5375) and 5 ft south of the area surveyed with the magnetometer, may be caused by another underground storage tank. (3) A 2,500-gamma magnetic anomaly near the northeast corner of the site has no equivalent resistivity anomaly, although disruption in GPR reflectors was observed. (4) A one-point magnetic anomaly was located at the northeast comer, but its source cannot be resolved. A chaotic reflective zone to the east represents the radar signature of Building E5375 construction fill

  15. QUALITY SERVICES EVALUATION MODEL BASED ON DEDICATED SOFTWARE TOOL

    Directory of Open Access Journals (Sweden)

    ANDREEA CRISTINA IONICĂ

    2012-10-01

    Full Text Available In this paper we introduced a new model, called Service Quality (SQ, which combines QFD and SERVQUAL methods. This model takes from the SERVQUAL method the five dimensions of requirements and three of characteristics and from the QFD method the application methodology. The originality of the SQ model consists in computing a global index that reflects the customers’ requirements accomplishment level by the quality characteristics. In order to prove the viability of the SQ model, there was developed a software tool that was applied for the evaluation of a health care services provider.

  16. Outlooks for mathematical modelling of the glass melting process

    Energy Technology Data Exchange (ETDEWEB)

    Waal, H. de [TNO Institute of Applied Physics, Delft (Netherlands)

    1997-12-31

    Mathematical modelling is nowadays a standard tool for major producers of float glass, T.V. glass and fiberglass. Also for container glass furnaces, glass tank modelling proves to be a valuable method to optimize process conditions. Mathematical modelling is no longer just a way to visualize the flow patterns and to provide data on heat transfer. It can also predict glass quality in relation to process parameters, because all chemical and physical phenomena are included in the latest generation of models, based on experimental and theoretical research on these phenomena.

  17. Joint implementation along two ways

    International Nuclear Information System (INIS)

    De Vos, R.

    1997-01-01

    In the test phase to the year 2000 joint implementation (JI) must prove to be a valuable tool for the climate change policy. The Dutch Ministries of Housing, Planning and Environmental Protection (VROM) and Economic Affairs (EZ) would like to form a basis for a JI-protocol during the Climate Conference in Kyoto, Japan, which will be held at the end of 1997. However, the Ministry of Development Cooperation wants to follow a more careful approach towards the cooperation with developing countries. Special attention is paid to a JI-project in Romania

  18. A naked-eye colorimetric "PCR developer"

    Science.gov (United States)

    Valentini, Paola; Pompa, Pier Paolo

    2016-04-01

    Despite several advances in molecular biology and diagnostics, Polymerase Chain Reaction (PCR) is currently the gold standard for nucleic acids amplification and detection, due to its versatility, low-cost and universality, with estimated genetically modified organisms, and pathogens). The PCR developer proved to be highly specific and ultra-sensitive, discriminating down to few copies of HIV viral DNA, diluted in an excess of interfering human genomic DNA, which is a clinically relevant viral load. Hence, it could be a valuable tool for both academic research and clinical applications.

  19. The effect of herbal formula PROVE 1 and Stevia levels in diets on diet utilization of growing pigs

    Directory of Open Access Journals (Sweden)

    Kooprasert, S.

    2007-05-01

    Full Text Available The objective of this experiment was to study the effect of 0.2% antibiotic (ascomix-s®, one kilogram of which contains lincomycin hydrochloride 44 g and sulfamethazine 110 g or 0.25% herbal formulaPROVE 1, combined with five levels of Stevia supplementation in the diets on digestibility of pigs. Two factors; 1 type of drug (0.2% antibiotic and 0.25% herbal formula PROVE 1 and 2 five Stevia levels (0,0.2, 0.4, 0.6 and 0.8% were investigated and 10 dietary treatments were used in this study. Ten related growing crossbred (Large White x Landrace barrow pigs (30±1.5 kg body weight were raised in individualmetabolism cages for three collecting periods (30, 40 and 50 kg body weight, each pig was fed one experimental diet throughout the collecting period.The results showed that pigs fed diet with either 0.2% antibiotic or 0.25% herbal formula PROVE 1 had similar digestibility of diet, crude protein (CP, fiber, ash and nitrogen free extract (NFE (89.01 vs 87.83,94.96 vs 94.23, 60.73 vs 59.03, 61.22 vs 60.44 and 93.28 vs 92.03%, respectively. Negligible differences were observed between 0 and 0.4% Stevia supplementation in diet, but levels showed better digestibility than the other levels of Stevia supplementation, and the diet with 0.4% Stevia supplementation had the highestdigestibility of diet, CP, fiber, ash and NFE (91.04, 96.43, 69.48, 70.47 and 94.07%, respectively. The diet with antibiotic combined with 0.4% Stevia had digestibility of diet, CP, fat and fiber better than the otherlevels of Stevia supplementation, especially digestibility of ash, which was significantly higher than that of diet with 0.2% Stevia, but not significantly different from the other levels of Stevia supplementation. A partof herbal formula PROVE1 combined with 0% Stevia had the highest digestibility of ash (72.90%, significantly higher than the other levels of Stevia supplementation, except the diet with herbal formula PROVE 1combined with 0.4% Stevia supplementation

  20. Safety objectives for next generation reactors: proving their achievement

    International Nuclear Information System (INIS)

    Tanguy, P.Y.

    1996-01-01

    Assuming that there is a consensus between regulatory bodies and nuclear operating organizations on safety objectives for future plants, how are we going to demonstrate that they have been achieved, with a reasonable certainty? Right from the beginning, I would like to underline the importance of convincing the public that high level safety objectives will be effectively achieved in future nuclear power plants. The mere fulfillment of administrative requirements might not be sufficient to obtain public acceptance. One has to take into account the changes that have occurred in the public preception of nuclear risks in the wake of the Chernobyl accident. Today public opinion rules out the possibility not only that such a catastrophic accident could recur, but also that any accident with detrimental health consequences off-site could occur. The nuclear industry has to reflect this concern in its safety demonstration, independently of proving the achievement of technical safety goals. The public opinion issue will be readdressed at the end of this paper. (orig.)

  1. Why prove it again? alternative proofs in mathematical practice

    CERN Document Server

    Dawson, Jr , John W

    2015-01-01

    This monograph considers several well-known mathematical theorems and asks the question, “Why prove it again?” while examining alternative proofs.   It  explores the different rationales mathematicians may have for pursuing and presenting new proofs of previously established results, as well as how they judge whether two proofs of a given result are different.  While a number of books have examined alternative proofs of individual theorems, this is the first that presents comparative case studies of other methods for a variety of different theorems. The author begins by laying out the criteria for distinguishing among proofs and enumerates reasons why new proofs have, for so long, played a prominent role in mathematical practice.  He then outlines various purposes that alternative proofs may serve.  Each chapter that follows provides a detailed case study of alternative proofs for particular theorems, including the Pythagorean Theorem, the Fundamental Theorem of Arithmetic, Desargues’ Theorem, the...

  2. Productivity, part 2: cloud storage, remote meeting tools, screencasting, speech recognition software, password managers, and online data backup.

    Science.gov (United States)

    Lackey, Amanda E; Pandey, Tarun; Moshiri, Mariam; Lalwani, Neeraj; Lall, Chandana; Bhargava, Puneet

    2014-06-01

    It is an opportune time for radiologists to focus on personal productivity. The ever increasing reliance on computers and the Internet has significantly changed the way we work. Myriad software applications are available to help us improve our personal efficiency. In this article, the authors discuss some tools that help improve collaboration and personal productivity, maximize e-learning, and protect valuable digital data. Published by Elsevier Inc.

  3. Pneumocystis diversity as a phylogeographic tool

    Directory of Open Access Journals (Sweden)

    S Derouiche

    2009-02-01

    Full Text Available Parasites are increasingly used to complement the evolutionary and ecological adaptation history of their hosts. Pneumocystis pathogenic fungi, which are transmitted from host-to-host via an airborne route, have been shown to constitute genuine host markers of evolution. These parasites can also provide valuable information about their host ecology. Here, we suggest that parasites can be used as phylogeographic markers to understand the geographical distribution of intra-specific host genetic variants. To test our hypothesis, we characterised Pneumocystis isolates from wild bats living in different areas. Bats comprise a wide variety of species; some of them are able to migrate. Thus, bat chorology and migration behaviour can be approached using Pneumocystis as phylogeographic markers. In the present work, we find that the genetic polymorphisms of bat-derived Pneumocystis are structured by host chorology. Therefore, Pneumocystis intra-specific genetic diversity may constitute a useful and relevant phylogeographic tool.

  4. Image-Based 3d Reconstruction Data as AN Analysis and Documentation Tool for Architects: the Case of Plaka Bridge in Greece

    Science.gov (United States)

    Kouimtzoglou, T.; Stathopoulou, E. K.; Agrafiotis, P.; Georgopoulos, A.

    2017-02-01

    Μodern advances in the field of image-based 3D reconstruction of complex architectures are valuable tools that may offer the researchers great possibilities integrating the use of such procedures in their studies. In the same way that photogrammetry was a well-known useful tool among the cultural heritage community for years, the state of the art reconstruction techniques generate complete and easy to use 3D data, thus enabling engineers, architects and other cultural heritage experts to approach their case studies in an exhaustive and efficient way. The generated data can be a valuable and accurate basis upon which further plans and studies will be drafted. These and other aspects of the use of image-based 3D data for architectural studies are to be presented and analysed in this paper, based on the experience gained from a specific case study, the Plaka Bridge. This historic structure is of particular interest, as it was recently lost due to extreme weather conditions and serves as a strong proof that preventive actions are of utmost importance in order to preserve our common past.

  5. Counterfactual Imagination as a Mental Tool for Innovation

    Directory of Open Access Journals (Sweden)

    Monika Chylińska

    2017-11-01

    Full Text Available In the article I demonstrate some of the possible ways by which counterfactual im⁠agination can lead people to innovation and the creation of novel and valuable solutions. I start with adopting the broad definition of counterfactuals, by which counterfactual imagination is understood as the ability to imagine alternative states of affairs which can relate to the past, present or future. I explain how counterfactual imagination differs from other sorts of imaginative and creative thoughts, pointing out that counterfactual types of thinking always rely on facts and involve a change in some features of the actual world, leaving other such features unaltered. I also show that the concept of counterfactual imagination can be useful when we aim to describe the very earliest manifestations of imaginative capacities in children, which can be seen in their make-believe games. All the mentioned characteristics of counterfactual imagination are further used to examine how what if and would be sorts of thinking and imagining might influence people’s creative performance. I conclude with the suggestion that—if guided properly—counterfactual imagination could be a truly valuable mental tool for innovation. This demonstration is partly influenced by Ruth Byrne’s multi-faceted analysis of counterfactual imagination, mainly from her book, The Rational Imagination: How People Create Alternatives to Reality.

  6. Central America Regional Climate Change Program: Tools for Your Use

    Science.gov (United States)

    Irwin, Dan; Irving, Bill; Yeager, Carey

    2006-01-01

    USAID/E-CAM and EGAT's Global Climate Change Team, in partnership with EPA, NASA, Oak Ridge National Lab, and the Central American Commission for Environment and Development (CCAD), have had a significant impact on the region's ability to monitor, mitigate, and adapt to environmental threats. Environmental decision-making tools and data are posted on a website (SERVIR: http://servir.nsstc.nasa.pov/home.html)that provides satellite and geographic data and maps to anybody with an Internet connection. The SERVIR program has been identified as the model for the Global Earth Observation System of Systems (GEOSS) - a major international effort to develop a 21st century system for environmental management and disaster response. In coordination with the USAID/EPA program, NASA has developed a GIs tool that enables countries to examine their forest cover and document changes on an annual basis. This information is used in calculating carbon emissions as part of greenhouse gas inventories, but also serves a valuable monitoring function. In addition, USAID/E-CAM and EGAT's Global Climate Change Team in collaboration with EPA are helping countries meet their obligations as signatories to the United Nations Framework Convention on Climate Change (UNFCCC). EPA is assisting Central American governments to improve the quality of their greenhouse gas emission inventories reported to the UNFCCC through the development of tools and improvements in data quality. New EPA tools developed include software to automatically calculate greenhouse gas emissions for the agricultural and forestry sector inventories, determine key sources of greenhouse gas emissions, and document institutional arrangements. Several of these tools are state of the art and are comparable to tools currently used in the U.S.

  7. A Benchmarking Analysis of Open-Source Business Intelligence Tools in Healthcare Environments

    Directory of Open Access Journals (Sweden)

    Andreia Brandão

    2016-10-01

    Full Text Available In recent years, a wide range of Business Intelligence (BI technologies have been applied to different areas in order to support the decision-making process. BI enables the extraction of knowledge from the data stored. The healthcare industry is no exception, and so BI applications have been under investigation across multiple units of different institutions. Thus, in this article, we intend to analyze some open-source/free BI tools on the market and their applicability in the clinical sphere, taking into consideration the general characteristics of the clinical environment. For this purpose, six BI tools were selected, analyzed, and tested in a practical environment. Then, a comparison metric and a ranking were defined for the tested applications in order to choose the one that best applies to the extraction of useful knowledge and clinical data in a healthcare environment. Finally, a pervasive BI platform was developed using a real case in order to prove the tool viability.

  8. Evaluation of work routines in PET/CT service with and individual tool in real time

    International Nuclear Information System (INIS)

    Moreira, Maryana N.; Oliveira, Fernanda R. de; Fischer, Andreia C.F.S.; Bacelar, Alexandre

    2016-01-01

    This study used a direct monitoring system (RemoteDose) that presents the individual dose and dose rate measurements, plotted instantly, as a tool to evaluate work routines of Individuals Occupationally Exposed (IOE) of a PET/CT Service. With this evaluation was possible to identify the critical tasks performed by each work team (Pharmaceutical/Nursing/Radiology Technician team) for subsequent optimization of patient care processes. It was also possible to assess whether these tasks are properly distributed among this teams. The RemoteDose system proved to be able to assist the optimization of radiation protection of a PET/CT Service, proving to be an important ally of the Radiation Protection Supervisor in this process, since it allows the display of real-time monitoring. (author)

  9. The Use of Video Games as a Teaching Tool to Improve Teaching-Learning: State of the Art Review

    Directory of Open Access Journals (Sweden)

    Angie Paola Roncancio-Ortiz

    2017-06-01

    Full Text Available In this new era of the 21st century when societies are constantly changing, education is the cornerstone to provide the people not only with the basic knowledge and tools, but also with the required skills for facing the challenges in a globalized world. Thus, video games have evolved from distractive activities, to more valuable tools. These tools can play a leading role in education-related processes, for example, supporting teaching tasks. The aim of this article is to present a state of art review on several particular experiences in which video games have been incorporated into teaching and learning activities. As a result, video games can be used as didactic mechanisms that help students, among other things, to solve learning problems, to improve motor and cognitive skills, and to foster creativity.

  10. Deep cleaning of a metallurgical zinc leaching residue and recovery of valuable metals

    Science.gov (United States)

    Xing, Peng; Ma, Bao-zhong; Zeng, Peng; Wang, Cheng-yan; Wang, Ling; Zhang, Yong-lu; Chen, Yong-qiang; Wang, Shuo; Wang, Qiu-yin

    2017-11-01

    Huge quantities of zinc leaching residues (ZLRs) generated from zinc production are dumped continuously around the world and pose a potential environmental threat because of their considerable amounts of entrained heavy metals (mainly lead). Most ZLRs have not been properly treated and the valuable metals in them have not yet been effectively recovered. Herein, the deep cleaning of a ZLR and recovery of valuable metals via a hydrometallurgical route were investigated. The cleaning process consists of two essential stages: acid leaching followed by calcium chloride leaching. The optimum conditions for extracting zinc, copper, and indium by acid leaching were a sulfuric acid concentration of 200 g·L-1, a liquid/solid ratio of 4:1 (mL/g), a leaching time of 2 h, and a temperature of 90°C. For lead and silver extractions, the optimum conditions were a calcium chloride concentration of 400 g·L-1, a pH value of 1.0, a leaching time of 1 h, and a temperature of 30°C. After calcium chloride leaching, silver and lead were extracted out and the lead was finally recovered as electrolytic lead by electrowinning. The anglesite phase, which poses the greatest potential environmental hazard, was removed from the ZLR after deep cleaning, thus reducing the cost of environmental management of ZLRs. The treatment of chlorine and spent electrolyte generated in the process was discussed.

  11. Comparing Fatigue Life Estimations of Composite Wind Turbine Blades using different Fatigue Analysis Tools

    DEFF Research Database (Denmark)

    Ardila, Oscar Gerardo Castro; Lennie, Matthew; Branner, Kim

    2015-01-01

    In this paper, fatigue lifetime prediction of NREL 5MW reference wind turbine is presented. The fatigue response of materials used in selected blade cross sections was obtained by applying macroscopic fatigue approaches and assuming uniaxial stress states. Power production and parked load cases...... suggested by the IEC 61400-1 standard were studied employing different load time intervals and by using two novel fatigue tools called ALBdeS and BECAS+F. The aeroelastic loads were defined thought aeroelastic simulations performed with both FAST and HAWC2 tools. The stress spectra at each layer were...... calculated employing laminated composite theory and beam cross section methods. The Palmgren-Miner linear damage rule was used to calculate the accumulation damage. The theoretical results produced by both fatigue tools proved a prominent effect of analysed design load conditions on the estimated lifetime...

  12. Initial building investigations at Aberdeen Proving Ground, Maryland: Objectives and methodology

    Energy Technology Data Exchange (ETDEWEB)

    Brubaker, K.L.; Dougherty, J.M.; McGinnis, L.D.

    1994-12-01

    As part of an environmental-contamination source-definition program at Aberdeen Proving Ground, detailed internal and external inspections of 23 potentially contaminated buildings are being conducted to describe and characterize the state of each building as it currently exists and to identify areas potentially contaminated with toxic or other hazardous substances. In addition, a detailed geophysical investigation is being conducted in the vicinity of each target building to locate and identify subsurface structures, associated with former building operations, that are potential sources of contamination. This report describes the objectives of the initial building inspections, including the geophysical investigations, and discusses the methodology that has been developed to achieve these objectives.

  13. Divide and conquer method for proving gaps of frustration free Hamiltonians

    DEFF Research Database (Denmark)

    Kastoryano, Michael J.; Lucia, Angelo

    2018-01-01

    Providing system-size independent lower bounds on the spectral gap of local Hamiltonian is in general a hard problem. For the case of finite-range, frustration free Hamiltonians on a spin lattice of arbitrary dimension, we show that a property of the ground state space is sufficient to obtain...... such a bound. We furthermore show that such a condition is necessary and equivalent to a constant spectral gap. Thanks to this equivalence, we can prove that for gapless models in any dimension, the spectral gap on regions of diameter $n$ is at most $o\\left(\\frac{\\log(n)^{2+\\epsilon}}{n}\\right)$ for any...... positive $\\epsilon$....

  14. Development of a golf-specific load monitoring tool: Content validity and feasibility.

    Science.gov (United States)

    Williams, Scott B; Gastin, Paul B; Saw, Anna E; Robertson, Sam

    2018-05-01

    Athletes often record details of their training and competitions, supported by information such as environmental conditions, travel, as well as how they felt. However, it is not known how prevalent these practices are in golfers, or how valuable this process is perceived. The purpose of this study was to develop a golf-specific load monitoring tool (GLMT), and establish the content validity and feasibility of this tool amongst high-level golfers. In the first phase of development, 21 experts were surveyed to determine the suitability of items for inclusion in the GLMT. Of the 36 items, 21 received >78% agreement, a requirement to establish content validity and for inclusion in the GLMT. Total duration was the preferred metric for golf-specific activities, whilst rating of perceived exertion (RPE) was preferred for measuring physical training. In the second phase, feasibility of the tool was assessed by surveying 13 high-level male golfers following 28-days of daily GLMT use. All items included in the GLMT were deemed feasible to record, with all players participating in the feasibility study providing high to very high ratings. Golfers responded that they would consider using a load monitoring tool of this nature long term, provided it can be completed in less than five minutes per day.

  15. Integrity operation of NPP-components - skills and tools to maintain competence

    International Nuclear Information System (INIS)

    Schulz, H.

    2003-01-01

    For pressurised components there is a long tradition in all industrialised countries to specify requirements for the design, manufacturing and operation of pressurised equipment. Over the last 5 decades more and more of good industrial practice have been codified in detailed codes and standards which in itself represent a valuable resource regarding the characterisation of the state of the art. Many components being operated today have been manufactured to codes and standards which were less prescriptive at the time of manufacturing. It is a considerable challenge to manage the knowledge transfer necessary for updated safety analysis or root cause analysis in case of defect assessment. There are a number of helpful tools, which have been generated to support the knowledge transfer. Some of these tools and other aspects like professional training and necessary skills to cope with the gaining of knowledge are presented. In detail, the following topics are discussed: data supply, training and retraining, experts networks, and verification chains. (author)

  16. Energetical fly ashes – separation and utilization of metallic valuable components

    Directory of Open Access Journals (Sweden)

    Michalíková Františka

    2000-12-01

    Full Text Available In the contribution, methods of separating metals – Fe, Al, Ge from energetic wastes – fly ashes are presented along with further possibilities of utilization of particular valuable components for industrial purposes.In the contribution, properties of energetic wastes are presented influencing the contents, separability, and utilizability of metal-bearing valuable components. From among physical properties these are grain size distribution and surface area. Chemical properties are characterized by elements contained in combusted coal whose content after combustion is increased 2 to 4 times, depending on the content of ash and combustible matters in original coal. Mineralogical properties of energetic wastes are determined by the combustion process conditions in the course of which mineral novelties are produced in concentrations suitable for separation.In the contribution, methods of separation and utilization of metals such as Fe, Al, Ge are described. From literature information on the processing of Fe component, as well as from results of experiments made at the Department of Mineral Processing and Environmental Protection, Technical University of Kosice follows that the highest concentration and mass yield of the component can be obtained from black coal fly ashes produced in smelting boilers. The content of Al in Slovak energetic wastes is lower than the 30 % Al2O3 limit that conditions an economic technological processing. Only in the case of black coal fly ash from TEKO Kosice and EVO Vojany was the Al2O3 content of 32.93 %. Therefore, in an indirect way – by separating the residues of uncombusted coal and magnetite Fe – the content of Al in fly ash was increased.For Ge, a principle of selective sizing has been utilized.A complex utilization of energetic wastes, that is the separation of metallic components, elimination of particular metals and the subsequent treatment of nonmetallic residue, should be an effective solution in various

  17. Estimation of the solubility parameters of model plant surfaces and agrochemicals: a valuable tool for understanding plant surface interactions.

    Science.gov (United States)

    Khayet, Mohamed; Fernández, Victoria

    2012-11-14

    Most aerial plant parts are covered with a hydrophobic lipid-rich cuticle, which is the interface between the plant organs and the surrounding environment. Plant surfaces may have a high degree of hydrophobicity because of the combined effects of surface chemistry and roughness. The physical and chemical complexity of the plant cuticle limits the development of models that explain its internal structure and interactions with surface-applied agrochemicals. In this article we introduce a thermodynamic method for estimating the solubilities of model plant surface constituents and relating them to the effects of agrochemicals. Following the van Krevelen and Hoftyzer method, we calculated the solubility parameters of three model plant species and eight compounds that differ in hydrophobicity and polarity. In addition, intact tissues were examined by scanning electron microscopy and the surface free energy, polarity, solubility parameter and work of adhesion of each were calculated from contact angle measurements of three liquids with different polarities. By comparing the affinities between plant surface constituents and agrochemicals derived from (a) theoretical calculations and (b) contact angle measurements we were able to distinguish the physical effect of surface roughness from the effect of the chemical nature of the epicuticular waxes. A solubility parameter model for plant surfaces is proposed on the basis of an increasing gradient from the cuticular surface towards the underlying cell wall. The procedure enabled us to predict the interactions among agrochemicals, plant surfaces, and cuticular and cell wall components, and promises to be a useful tool for improving our understanding of biological surface interactions.

  18. Tool wear in terms of vibration effects in milling medium-density fibreboard with an industrial robot

    International Nuclear Information System (INIS)

    Tratar, Janez; Pusavec, Franci; Kopac, Janez

    2014-01-01

    Machining with robots represents a promising, highly flexible and cost effective alternative to standard machining and hand labour applications when machining mid tolerance soft material end products. One of the most challenging issues is to know the vibration characteristics in milling with the robots which greatly affect tool life. In general the technological bases of tool life expectancy while milling with robot arms are not available or studied. That's why the purpose of this paper is to investigate the influence of attained vibrations analysis during the milling process and correlated tool wear. Primarily the study is focused on tool wear according to the distance between the milling position and the robot's base. Results show that increasing distance between the robot's base and the milling position significantly affects tool wear because of the attained vibrations in proportion to the increasing distance respectively. Tool wear has also proved to be greater in comparison to machining with CNC machine and applicable new information for woodworking industry.

  19. Technical session: the Atomika TXRF tool series

    International Nuclear Information System (INIS)

    Dobler, M. . URL: www.atomika.com

    2000-01-01

    ATOMIKA Instruments GmbH holds worldwide competence as a renowned producer of high-performance metrology tools and analytic devices. ATOMIKA's TXRF products are widely accepted for elemental contamination monitoring on semiconductor materials as well as in chemical analysis. More than 100 companies and institutes have their analytical work based on TXRF tools made by ATOMIKA Instruments. ATOMIKA's TXRF 8300W/82OOW wafer contamination monitors are the result of an evolution based on a background of 20 years of competence. Built for the semiconductor industry, the TXRF 8300W/82OOW detect rnetal contaminants on 300mm, or 200mm silicon wafer surfaces with highest possible sensitivity. Operating under ambient conditions, with a sealed x-ray tube, and having their own minienvironment (FOUP, or SMIF respectively), TXRF 8300W182OOW are optimally suited for in-line use. Fab automation (GEM/SECS) is supported by predefined measurement recipes and fully automatic routines. High throughput and uptimes, an ergonomic design according to SEMI standard plus an unrivaled small footprint of 1.1 m 2 make the TXRF 8300W/82OOW most efficient and economic solutions for industrial wafer monitoring. As the specific tool for multielement trace and thin layer analysis the ATOMIKA TXRF 8030C provides simultaneous and fast determination of alt elements within the range from sodium to uranium. Sophisticated measurement instrumentation provides detection limits down to the ppt range. On the other hand, performance is decisively facilitated by features as automatic switching of primary radiation, predefined measurement recipes, or software driven optimization of the entire measurement process. These features make the TXRF 8030C a valuable analytic tool for a wide range of applications: contamination in water, dust or sediments; quantitative screening in the chemical industry; toxic elements in tissues and biological fluids; radioactive elements; process chemicals in the semiconductor industry

  20. Animal models: an important tool in mycology.

    Science.gov (United States)

    Capilla, Javier; Clemons, Karl V; Stevens, David A

    2007-12-01

    Animal models of fungal infections are, and will remain, a key tool in the advancement of the medical mycology. Many different types of animal models of fungal infection have been developed, with murine models the most frequently used, for studies of pathogenesis, virulence, immunology, diagnosis, and therapy. The ability to control numerous variables in performing the model allows us to mimic human disease states and quantitatively monitor the course of the disease. However, no single model can answer all questions and different animal species or different routes of infection can show somewhat different results. Thus, the choice of which animal model to use must be made carefully, addressing issues of the type of human disease to mimic, the parameters to follow and collection of the appropriate data to answer those questions being asked. This review addresses a variety of uses for animal models in medical mycology. It focuses on the most clinically important diseases affecting humans and cites various examples of the different types of studies that have been performed. Overall, animal models of fungal infection will continue to be valuable tools in addressing questions concerning fungal infections and contribute to our deeper understanding of how these infections occur, progress and can be controlled and eliminated.

  1. OpenMeetings as a browser-based teleconferencing tool for EFDA laboratories

    Energy Technology Data Exchange (ETDEWEB)

    Santos, B., E-mail: bsantos@ipfn.ist.utl.pt [Associacao EURATOM/IST, Instituto de Plasmas e Fusao Nuclear - Laboratorio Associado, Instituto Superior Tecnico, P-1049-001 Lisboa (Portugal); Castro, R. [Asociacion EURATOM/CIEMAT Para Fusion, 28040 Madrid (Spain); Santos, J.H.; Gomes, D.; Fernandes, H.; Sousa, J.; Varandas, C.A.F. [Associacao EURATOM/IST, Instituto de Plasmas e Fusao Nuclear - Laboratorio Associado, Instituto Superior Tecnico, P-1049-001 Lisboa (Portugal)

    2011-10-15

    Remote participation is a key success factor for worldwide organizations and video-conference is an important aspect when laboratory collaborators are geographically dispersed. Several tools for video-conference are available worldwide. However, there is a need for a default integrated set of tools which provide all the needed features for remote participation between cooperating laboratories. Moreover, laboratories currently use different video-conference tools to communicate leading to a non-compatible method among them. OpenMeetings is open source software which provides video-conferences through web-browsing. It is operating system independent, requires no computer installation providing easy integration with already existing tools and customization of requirements. This paper intends to give an OpenMeetings overview as a video-conference application between worldwide laboratories and to demonstrate its integration with the European Fusion Development Agreement (EFDA) Federation authentication and authorization features. EFDA Federation is a multi-organization security infrastructure, whose purpose is to provide sharing and provision of a wide set of resources so that authenticated users may access them in a transparent and secure mode. This infrastructure is based on a distributed security technology called PAPI (Point of Access to Providers of Information). OpenMeetings can be a valuable EFDA Federation resource and a good approach as a method to provide a worldwide laboratory video-conferencing application, based on standard browsers.

  2. OpenMeetings as a browser-based teleconferencing tool for EFDA laboratories

    International Nuclear Information System (INIS)

    Santos, B.; Castro, R.; Santos, J.H.; Gomes, D.; Fernandes, H.; Sousa, J.; Varandas, C.A.F.

    2011-01-01

    Remote participation is a key success factor for worldwide organizations and video-conference is an important aspect when laboratory collaborators are geographically dispersed. Several tools for video-conference are available worldwide. However, there is a need for a default integrated set of tools which provide all the needed features for remote participation between cooperating laboratories. Moreover, laboratories currently use different video-conference tools to communicate leading to a non-compatible method among them. OpenMeetings is open source software which provides video-conferences through web-browsing. It is operating system independent, requires no computer installation providing easy integration with already existing tools and customization of requirements. This paper intends to give an OpenMeetings overview as a video-conference application between worldwide laboratories and to demonstrate its integration with the European Fusion Development Agreement (EFDA) Federation authentication and authorization features. EFDA Federation is a multi-organization security infrastructure, whose purpose is to provide sharing and provision of a wide set of resources so that authenticated users may access them in a transparent and secure mode. This infrastructure is based on a distributed security technology called PAPI (Point of Access to Providers of Information). OpenMeetings can be a valuable EFDA Federation resource and a good approach as a method to provide a worldwide laboratory video-conferencing application, based on standard browsers.

  3. Data visualization, bar naked: A free tool for creating interactive graphics.

    Science.gov (United States)

    Weissgerber, Tracey L; Savic, Marko; Winham, Stacey J; Stanisavljevic, Dejana; Garovic, Vesna D; Milic, Natasa M

    2017-12-15

    Although bar graphs are designed for categorical data, they are routinely used to present continuous data in studies that have small sample sizes. This presentation is problematic, as many data distributions can lead to the same bar graph, and the actual data may suggest different conclusions from the summary statistics. To address this problem, many journals have implemented new policies that require authors to show the data distribution. This paper introduces a free, web-based tool for creating an interactive alternative to the bar graph (http://statistika.mfub.bg.ac.rs/interactive-dotplot/). This tool allows authors with no programming expertise to create customized interactive graphics, including univariate scatterplots, box plots, and violin plots, for comparing values of a continuous variable across different study groups. Individual data points may be overlaid on the graphs. Additional features facilitate visualization of subgroups or clusters of non-independent data. A second tool enables authors to create interactive graphics from data obtained with repeated independent experiments (http://statistika.mfub.bg.ac.rs/interactive-repeated-experiments-dotplot/). These tools are designed to encourage exploration and critical evaluation of the data behind the summary statistics and may be valuable for promoting transparency, reproducibility, and open science in basic biomedical research. © 2017 by The American Society for Biochemistry and Molecular Biology, Inc.

  4. Degs and degu operon from Bacillus-brevis: a combination that enhances the production of commercially valuable enzymes

    CSIR Research Space (South Africa)

    Louw, M

    1995-05-01

    Full Text Available A novel method has been developed for increasing the production of commercially valuable enzymes, such as proteases, beta-glucanases, alpha-amylases and levansucrase. It is dependent on two genes cloned from Bacillus brevis, expressed on a multicopy...

  5. Reliability of the ECHOWS Tool for Assessment of Patient Interviewing Skills.

    Science.gov (United States)

    Boissonnault, Jill S; Evans, Kerrie; Tuttle, Neil; Hetzel, Scott J; Boissonnault, William G

    2016-04-01

    History taking is an important component of patient/client management. Assessment of student history-taking competency can be achieved via a standardized tool. The ECHOWS tool has been shown to be valid with modest intrarater reliability in a previous study but did not demonstrate sufficient power to definitively prove its stability. The purposes of this study were: (1) to assess the reliability of the ECHOWS tool for student assessment of patient interviewing skills and (2) to determine whether the tool discerns between novice and experienced skill levels. A reliability and construct validity assessment was conducted. Three faculty members from the United States and Australia scored videotaped histories from standardized patients taken by students and experienced clinicians from each of these countries. The tapes were scored twice, 3 to 6 weeks apart. Reliability was assessed using interclass correlation coefficients (ICCs) and repeated measures. Analysis of variance models assessed the ability of the tool to discern between novice and experienced skill levels. The ECHOWS tool showed excellent intrarater reliability (ICC [3,1]=.74-.89) and good interrater reliability (ICC [2,1]=.55) as a whole. The summary of performance (S) section showed poor interrater reliability (ICC [2,1]=.27). There was no statistical difference in performance on the tool between novice and experienced clinicians. A possible ceiling effect may occur when standardized patients are not coached to provide complex and obtuse responses to interviewer questions. Variation in familiarity with the ECHOWS tool and in use of the online training may have influenced scoring of the S section. The ECHOWS tool demonstrates excellent intrarater reliability and moderate interrater reliability. Sufficient training with the tool prior to student assessment is recommended. The S section must evolve in order to provide a more discerning measure of interviewing skills. © 2016 American Physical Therapy

  6. Tying Profit to Performance: A Valuable Tool, But Use With Good Judgment

    Science.gov (United States)

    2015-06-01

    profitability on behalf of its shareholders and/or owners—that’s capital- ism. Our job is to protect the interests of the taxpayers and the warfighter while...business, then it was not good. Profit is the fundamental reason that businesses exist: to make money for their owners or shareholders . Without...performance of the service, or we may only be interested in controlling cost at a set level of performance. As we emphasized in BBP 2.0, we have to start

  7. Measured parental height in Turner syndrome-a valuable but underused diagnostic tool.

    Science.gov (United States)

    Ouarezki, Yasmine; Cizmecioglu, Filiz Mine; Mansour, Chourouk; Jones, Jeremy Huw; Gault, Emma Jane; Mason, Avril; Donaldson, Malcolm D C

    2018-02-01

    Early diagnosis of Turner syndrome (TS) is necessary to facilitate appropriate management, including growth promotion. Not all girls with TS have overt short stature, and comparison with parental height (Ht) is needed for appropriate evaluation. We examined both the prevalence and diagnostic sensitivity of measured parental Ht in a dedicated TS clinic between 1989 and 2013. Lower end of parental target range (LTR) was calculated as mid-parental Ht (correction factor 12.5 cm minus 8.5 cm) and converted to standard deviation scores (SDS) using UK 1990 data, then compared with patient Ht SDS at first accurate measurement aged > 1 year. Information was available in 172 girls of whom 142 (82.6%) were short at first measurement. However, both parents had been measured in only 94 girls (54.6%). In 92 of these girls age at measurement was 6.93 ± 3.9 years, Ht SDS vs LTR SDS - 2.63 ± 0.94 vs - 1.77 ± 0.81 (p Turner syndrome are short in relation to parental heights, with untreated final height approximately 20 cm below female population mean. • Measured parental height is more accurate than reported height. What is New: • In a dedicated Turner clinic, there was 85% sensitivity when comparing patient height standard deviation score at first accurate measurement beyond 1 year of age with the lower end of the parental target range standard deviation. • However, measured height in both parents had been recorded in only 54.6% of the Turner girls attending the clinic. This indicates the need to improve the quality of growth assessment in tertiary care.

  8. Otolith shape as a valuable tool to evaluate the stock structure of ...

    African Journals Online (AJOL)

    Swordfish Xiphias gladius is an oceanic-pelagic species. Its population structure in the Western Indian Ocean was studied from the shape of the sagittal otoliths of 391 individuals collected from 2009 to 2014. Normalised elliptical Fourier descriptors (EFDs) were extracted automatically using TNPC software. Principal ...

  9. Template mediated protein self-assembly as a valuable tool in regenerative therapy.

    Science.gov (United States)

    Kundu, B; Eltohamy, M; Yadavalli, V K; Reis, R L; Kim, H W

    2018-04-11

    The assembly of natural proteinaceous biopolymers into macro-scale architectures is of great importance in synthetic biology, soft-material science and regenerative therapy. The self-assembly of protein tends to be limited due to anisotropic interactions among protein molecules, poor solubility and stability. Here, we introduce a unique platform to self-immobilize diverse proteins (fibrous and globular, positively and negatively charged, low and high molecular weight) using silicon surfaces with pendant -NH 2 groups via a facile one step diffusion limited aggregation (DLA) method. All the experimental proteins (type I collagen, bovine serum albumin and cytochrome C) self-assemble into seaweed-like branched dendritic architectures via classical DLA in the absence of any electrolytes. The notable differences in branching architectures are due to dissimilarities in protein colloidal sub-units, which is typical for each protein type, along with the heterogeneous distribution of surface -NH 2 groups. Fractal analysis of assembled structures is used to explain the underlying route of fractal deposition; which concludes how proteins with different functionality can yield similar assembly. Further, the nano-micro-structured surfaces can be used to provide functional topographical cues to study cellular responses, as demonstrated using rat bone marrow stem cells. The results indicate that the immobilization of proteins via DLA does not affect functionality, instead serving as topographical cues to guide cell morphology. This indicates a promising design strategy at the tissue-material interface and is anticipated to guide future surface modifications. A cost-effective standard templating strategy is therefore proposed for fundamental and applied particle aggregation studies, which can be used at multiple length scales for biomaterial design and surface reformation.

  10. Robots provide valuable tools for waste processing at Millstone Nuclear Power Station

    International Nuclear Information System (INIS)

    Miles, K.; Volpe, K.

    1997-01-01

    The Millstone nuclear power station has begun an aggressive program to use robotics, which when properly used minimizes operating costs and exposure to personnel. This article describes several new ways of using existing robotic equipment to speed up work processes and provide solutions to difficult problems. The moisture separator pit and liquid radwaste are discussed

  11. JPSS Preparations at the Satellite Proving Ground for Marine, Precipitation, and Satellite Analysis

    Science.gov (United States)

    Folmer, Michael J.; Berndt, E.; Clark, J.; Orrison, A.; Kibler, J.; Sienkiewicz, J.; Nelson, J.; Goldberg, M.; Sjoberg, W.

    2016-01-01

    The ocean prediction center at the national hurricane center's tropical analysis and forecast Branch, the Weather Prediction center and the Satellite analysis branch of NESDIS make up the Satellite Proving Ground for Marine, Precipitation and Satellite Analysis. These centers had early exposure to JPSS products using the S-NPP Satellite that was launched in 2011. Forecasters continue to evaluate new products in anticipation for the launch of JPSS-1 sometime in 2017.

  12. Research in advanced formal theorem-proving techniques. [design and implementation of computer languages

    Science.gov (United States)

    Raphael, B.; Fikes, R.; Waldinger, R.

    1973-01-01

    The results are summarised of a project aimed at the design and implementation of computer languages to aid in expressing problem solving procedures in several areas of artificial intelligence including automatic programming, theorem proving, and robot planning. The principal results of the project were the design and implementation of two complete systems, QA4 and QLISP, and their preliminary experimental use. The various applications of both QA4 and QLISP are given.

  13. Proving Continuity of Coinductive Global Bisimulation Distances: A Never Ending Story

    Directory of Open Access Journals (Sweden)

    David Romero-Hernández

    2015-12-01

    Full Text Available We have developed a notion of global bisimulation distance between processes which goes somehow beyond the notions of bisimulation distance already existing in the literature, mainly based on bisimulation games. Our proposal is based on the cost of transformations: how much we need to modify one of the compared processes to obtain the other. Our original definition only covered finite processes, but a coinductive approach allows us to extend it to cover infinite but finitary trees. After having shown many interesting properties of our distance, it was our intention to prove continuity with respect to projections, but unfortunately the issue remains open. Nonetheless, we have obtained several partial results that are presented in this paper.

  14. Clinical tools for the 90s

    International Nuclear Information System (INIS)

    Ross, Brian; Kreis, Roland; Ernst, Thomas

    1992-01-01

    Magnetic resonance spectroscopy (MRS) is a flexible tool with a real clinical utility. Examples from experience in over 250 cases of clinical proton MRS are presented. Shorter echo time and reproducible water suppression increases the number of metabolites which can be detected and identified. Case reports illustrate the significance of altered ratios of N-acetylaspartate, choline, total creatine, myo-inositol, glutamate, glutamine, lactate, glucose, ketones, and, as an incidental finding, ethanol. Significant new information has resulted by applying proton MRS in chronic hepatic encephalopathy, diabetes mellitus and severe hypoxic encephalopathy ('near-drowning'). Potentially useful measurements have been made in normal brain maturation, ethanol related diseases, dementia (normal-pressure hydrocephalus), urea cycle defect and neuronal disease presenting as seizures. Metabolite imaging, particularly with proton, is clinically valuable, documenting the heterogeneity of biochemical disorders in seemingly focal lesions. A new method of specific 31-phosphorus-phosphocreatine imaging provides information in partially denervated skeletal muscle and is expected to have applications in brain. (author). 50 refs.; 13 figs

  15. Portable hyperspectral device as a valuable tool for the detection of protective agents applied on hystorical buildings

    Science.gov (United States)

    Vettori, S.; Pecchioni, E.; Camaiti, M.; Garfagnoli, F.; Benvenuti, M.; Costagliola, P.; Moretti, S.

    2012-04-01

    In the recent past, a wide range of protective products (in most cases, synthetic polymers) have been applied to the surfaces of ancient buildings/artefacts to preserve them from alteration [1]. The lack of a detailed mapping of the permanence and efficacy of these treatments, in particular when applied on large surfaces such as building facades, may be particularly noxious when new restoration treatments are needed and the best choice of restoration protocols has to be taken. The presence of protective compounds on stone surfaces may be detected in laboratory by relatively simple diagnostic tests, which, however, normally require invasive (or micro-invasive) sampling methodologies and are time-consuming, thus limiting their use only to a restricted number of samples and sampling sites. On the contrary, hyperspectral sensors are rapid, non-invasive and non-destructive tools capable of analyzing different materials on the basis of their different patterns of absorption at specific wavelengths, and so particularly suitable for the field of cultural heritage [2,3]. In addition, they can be successfully used to discriminate between inorganic (i.e. rocks and minerals) and organic compounds, as well as to acquire, in short times, many spectra and compositional maps at relatively low costs. In this study we analyzed a number of stone samples (Carrara Marble and biogenic calcarenites - "Lecce Stone" and "Maastricht Stone"-) after treatment of their surfaces with synthetic polymers (synthetic wax, acrylic, perfluorinated and silicon based polymers) of common use in conservation-restoration practice. The hyperspectral device used for this purpose was ASD FieldSpec FR Pro spectroradiometer, a portable, high-resolution instrument designed to acquire Visible and Near-Infrared (VNIR: 350-1000 nm) and Short-Wave Infrared (SWIR: 1000-2500 nm) punctual reflectance spectra with a rapid data collection time (about 0.1 s for each spectrum). The reflectance spectra so far obtained in

  16. NIKE: a new clinical tool for establishing levels of indications for cataract surgery.

    Science.gov (United States)

    Lundström, Mats; Albrecht, Susanne; Håkansson, Ingemar; Lorefors, Ragnhild; Ohlsson, Sven; Polland, Werner; Schmid, Andrea; Svensson, Göran; Wendel, Eva

    2006-08-01

    The purpose of this study was to construct a new clinical tool for establishing levels of indications for cataract surgery, and to validate this tool. Teams from nine eye clinics reached an agreement about the need to develop a clinical tool for setting levels of indications for cataract surgery and about the items that should be included in the tool. The tool was to be called 'NIKE' (Nationell Indikationsmodell för Kataraktextraktion). The Canadian Cataract Priority Criteria Tool served as a model for the NIKE tool, which was modified for Swedish conditions. Items included in the tool were visual acuity of both eyes, patients' perceived difficulties in day-to-day life, cataract symptoms, the ability to live independently, and medical/ophthalmic reasons for surgery. The tool was validated and tested in 343 cataract surgery patients. Validity, stability and reliability were tested and the outcome of surgery was studied in relation to the indication setting. Four indication groups (IGs) were suggested. The group with the greatest indications for surgery was named group 1 and that with the lowest, group 4. Validity was proved to be good. Surgery had the greatest impact on the group with the highest indications for surgery. Test-retest reliability test and interexaminer tests of indication settings showed statistically significant intraclass correlations (intraclass correlation coefficients [ICCs] 0.526 and 0.923, respectively). A new clinical tool for indication setting in cataract surgery is presented. This tool, the NIKE, takes into account both visual acuity and the patient's perceived problems in day-to-day life because of cataract. The tool seems to be stable and reliable and neutral towards different examiners.

  17. Technologies for Extracting Valuable Metals and Compounds from Geothermal Fluids

    Energy Technology Data Exchange (ETDEWEB)

    Harrison, Stephen [SIMBOL Materials

    2014-04-30

    Executive Summary Simbol Materials studied various methods of extracting valuable minerals from geothermal brines in the Imperial Valley of California, focusing on the extraction of lithium, manganese, zinc and potassium. New methods were explored for managing the potential impact of silica fouling on mineral extraction equipment, and for converting silica management by-products into commercial products.` Studies at the laboratory and bench scale focused on manganese, zinc and potassium extraction and the conversion of silica management by-products into valuable commercial products. The processes for extracting lithium and producing lithium carbonate and lithium hydroxide products were developed at the laboratory scale and scaled up to pilot-scale. Several sorbents designed to extract lithium as lithium chloride from geothermal brine were developed at the laboratory scale and subsequently scaled-up for testing in the lithium extraction pilot plant. Lithium The results of the lithium studies generated the confidence for Simbol to scale its process to commercial operation. The key steps of the process were demonstrated during its development at pilot scale: 1. Silica management. 2. Lithium extraction. 3. Purification. 4. Concentration. 5. Conversion into lithium hydroxide and lithium carbonate products. Results show that greater than 95% of the lithium can be extracted from geothermal brine as lithium chloride, and that the chemical yield in converting lithium chloride to lithium hydroxide and lithium carbonate products is greater than 90%. The product purity produced from the process is consistent with battery grade lithium carbonate and lithium hydroxide. Manganese and zinc Processes for the extraction of zinc and manganese from geothermal brine were developed. It was shown that they could be converted into zinc metal and electrolytic manganese dioxide after purification. These processes were evaluated for their economic potential, and at the present time Simbol

  18. Assessing teamwork performance in obstetrics: A systematic search and review of validated tools.

    Science.gov (United States)

    Fransen, Annemarie F; de Boer, Liza; Kienhorst, Dieneke; Truijens, Sophie E; van Runnard Heimel, Pieter J; Oei, S Guid

    2017-09-01

    Teamwork performance is an essential component for the clinical efficiency of multi-professional teams in obstetric care. As patient safety is related to teamwork performance, it has become an important learning goal in simulation-based education. In order to improve teamwork performance, reliable assessment tools are required. These can be used to provide feedback during training courses, or to compare learning effects between different types of training courses. The aim of the current study is to (1) identify the available assessment tools to evaluate obstetric teamwork performance in a simulated environment, and (2) evaluate their psychometric properties in order to identify the most valuable tool(s) to use. We performed a systematic search in PubMed, MEDLINE, and EMBASE to identify articles describing assessment tools for the evaluation of obstetric teamwork performance in a simulated environment. In order to evaluate the quality of the identified assessment tools the standards and grading rules have been applied as recommended by the Accreditation Council for Graduate Medical Education (ACGME) Committee on Educational Outcomes. The included studies were also assessed according to the Oxford Centre for Evidence Based Medicine (OCEBM) levels of evidence. This search resulted in the inclusion of five articles describing the following six tools: Clinical Teamwork Scale, Human Factors Rating Scale, Global Rating Scale, Assessment of Obstetric Team Performance, Global Assessment of Obstetric Team Performance, and the Teamwork Measurement Tool. Based on the ACGME guidelines we assigned a Class 3, level C of evidence, to all tools. Regarding the OCEBM levels of evidence, a level 3b was assigned to two studies and a level 4 to four studies. The Clinical Teamwork Scale demonstrated the most comprehensive validation, and the Teamwork Measurement Tool demonstrated promising results, however it is recommended to further investigate its reliability. Copyright © 2017

  19. Tools for the efficient use of the gas: Combustion diagrams

    International Nuclear Information System (INIS)

    Amell Andres; Maya Ruben D

    1997-01-01

    In this work the results of an investigation carried out with the purpose of developing a fundamental tool related to the process of optimization of the combustion are presented: The combustion diagrams with the optimization are looked for using the maximum heat generated in the reaction and to avoid the production of pollutants, product of an incomplete combustion. This is carried out controlling the stability of the flame and the composition of the smoke by means of the adjustment of the ratio air/combustible basically and with a homogeneous mixture. A constant pursuit of the dry smoke allows to determine the presence of pollutants and to establish the combustion type. A valuable tool to establish the conditions in which this process is carried out, this is the combustion diagram; this diagram uses the values of the concentration of O2 and CO2 in the dry smoke, starting from the sampling of the products by an analyzer to determine the composition of these smoke, the percentage of air really used, the air in excess and the combustion type

  20. Web-based tools for microRNAs involved in human cancer.

    Science.gov (United States)

    Mar-Aguilar, Fermín; Rodríguez-Padilla, Cristina; Reséndez-Pérez, Diana

    2016-06-01

    MicroRNAs (miRNAs/miRs) are a family of small, endogenous and evolutionarily-conserved non-coding RNAs that are involved in the regulation of several cellular and functional processes. miRNAs can act as oncogenes or tumor suppressors in all types of cancer, and could be used as prognostic and diagnostic biomarkers. Databases and computational algorithms are behind the majority of the research performed on miRNAs. These tools assemble and curate the relevant information on miRNAs and present it in a user-friendly manner. The current review presents 14 online databases that address every aspect of miRNA cancer research. Certain databases focus on miRNAs and a particular type of cancer, while others analyze the behavior of miRNAs in different malignancies at the same time. Additional databases allow researchers to search for mutations in miRNAs or their targets, and to review the naming history of a particular miRNA. All these databases are open-access, and are a valuable tool for those researchers working with these molecules, particularly those who lack access to an advanced computational infrastructure.

  1. On developing a prospecting tool for wind industry and policy decision support

    International Nuclear Information System (INIS)

    McKeown, Charles; Adelaja, Adesoji; Calnin, Benjamin

    2011-01-01

    This paper presents the rudiments of a Wind Prospecting Tool designed to inform private and public decision makers involved in wind industry development in reducing transaction costs associated with identifying areas of mutual focus within a state. The multiple layer decision support framework has proven to be valuable to industry, state government and local decision makers. Information on wind resources, land availability, potential land costs, potential NIMBYism concerns and economic development potential were integrated to develop a framework for decision support. The paper also highlights implications for decision support research and the role of higher education in providing anticipatory science to enhance private and public choices in economic development. - Research Highlights: →In this paper we explore the building and value of a wind industry location decision support tool. →We examine the development process from the industry perspective. →We discuss the creation of a decision support tool that was designed for industry, state policy makers and local decision makers. →We build a model framework for wind prospecting decision support. →Finally we discuss the impact on local and state decision making as a result of being informed by science based decision support.

  2. Benefits and limitations of using decision analytic tools to assess uncertainty and prioritize Landscape Conservation Cooperative information needs

    Science.gov (United States)

    Post van der Burg, Max; Cullinane Thomas, Catherine; Holcombe, Tracy R.; Nelson, Richard D.

    2016-01-01

    The Landscape Conservation Cooperatives (LCCs) are a network of partnerships throughout North America that are tasked with integrating science and management to support more effective delivery of conservation at a landscape scale. In order to achieve this integration, some LCCs have adopted the approach of providing their partners with better scientific information in an effort to facilitate more effective and coordinated conservation decisions. Taking this approach has led many LCCs to begin funding research to provide the information for improved decision making. To ensure that funding goes to research projects with the highest likelihood of leading to more integrated broad scale conservation, some LCCs have also developed approaches for prioritizing which information needs will be of most benefit to their partnerships. We describe two case studies in which decision analytic tools were used to quantitatively assess the relative importance of information for decisions made by partners in the Plains and Prairie Potholes LCC. The results of the case studies point toward a few valuable lessons in terms of using these tools with LCCs. Decision analytic tools tend to help shift focus away from research oriented discussions and toward discussions about how information is used in making better decisions. However, many technical experts do not have enough knowledge about decision making contexts to fully inform the latter type of discussion. When assessed in the right decision context, however, decision analyses can point out where uncertainties actually affect optimal decisions and where they do not. This helps technical experts understand that not all research is valuable in improving decision making. But perhaps most importantly, our results suggest that decision analytic tools may be more useful for LCCs as way of developing integrated objectives for coordinating partner decisions across the landscape, rather than simply ranking research priorities.

  3. Design of Scalable and Effective Earth Science Collaboration Tool

    Science.gov (United States)

    Maskey, M.; Ramachandran, R.; Kuo, K. S.; Lynnes, C.; Niamsuwan, N.; Chidambaram, C.

    2014-12-01

    Collaborative research is growing rapidly. Many tools including IDEs are now beginning to incorporate new collaborative features. Software engineering research has shown the effectiveness of collaborative programming and analysis. In particular, drastic reduction in software development time resulting in reduced cost has been highlighted. Recently, we have witnessed the rise of applications that allow users to share their content. Most of these applications scale such collaboration using cloud technologies. Earth science research needs to adopt collaboration technologies to reduce redundancy, cut cost, expand knowledgebase, and scale research experiments. To address these needs, we developed the Earth science collaboration workbench (CWB). CWB provides researchers with various collaboration features by augmenting their existing analysis tools to minimize learning curve. During the development of the CWB, we understood that Earth science collaboration tasks are varied and we concluded that it is not possible to design a tool that serves all collaboration purposes. We adopted a mix of synchronous and asynchronous sharing methods that can be used to perform collaboration across time and location dimensions. We have used cloud technology for scaling the collaboration. Cloud has been highly utilized and valuable tool for Earth science researchers. Among other usages, cloud is used for sharing research results, Earth science data, and virtual machine images; allowing CWB to create and maintain research environments and networks to enhance collaboration between researchers. Furthermore, collaborative versioning tool, Git, is integrated into CWB for versioning of science artifacts. In this paper, we present our experience in designing and implementing the CWB. We will also discuss the integration of collaborative code development use cases for data search and discovery using NASA DAAC and simulation of satellite observations using NASA Earth Observing System Simulation

  4. Proving the ecosystem value through hydrological modelling

    International Nuclear Information System (INIS)

    Dorner, W; Spachinger, K; Metzka, R; Porter, M

    2008-01-01

    Ecosystems provide valuable functions. Also natural floodplains and river structures offer different types of ecosystem functions such as habitat function, recreational area and natural detention. From an economic stand point the loss (or rehabilitation) of these natural systems and their provided natural services can be valued as a damage (or benefit). Consequently these natural goods and services must be economically valued in project assessments e.g. cost-benefit-analysis or cost comparison. Especially in smaller catchments and river systems exists significant evidence that natural flood detention reduces flood risk and contributes to flood protection. Several research projects evaluated the mitigating effect of land use, river training and the loss of natural flood plains on development, peak and volume of floods. The presented project analysis the hypothesis that ignoring natural detention and hydrological ecosystem services could result in economically inefficient solutions for flood protection and mitigation. In test areas, subcatchments of the Danube in Germany, a combination of hydrological and hydrodynamic models with economic evaluation techniques was applied. Different forms of land use, river structure and flood protection measures were assed and compared from a hydrological and economic point of view. A hydrodynamic model was used to simulate flows to assess the extent of flood affected areas and damages to buildings and infrastructure as well as to investigate the impacts of levees and river structure on a local scale. These model results provided the basis for an economic assessment. Different economic valuation techniques, such as flood damage functions, cost comparison method and substation-approach were used to compare the outcomes of different hydrological scenarios from an economic point of view and value the ecosystem service. The results give significant evidence that natural detention must be evaluated as part of flood mitigation projects

  5. Geophysics: Building E5476 decommissiong, Aberdeen Proving Ground

    International Nuclear Information System (INIS)

    Miller, S.F.; Thompson, M.D.; McGinnis, M.G.; McGinnis, L.D.

    1992-11-01

    Building E5476 was one of ten potentially contaminated sites in the Canal Creek and Westwood areas of the Edgewood section of Aberdeen Proving Ground examined by a geophysical team from Argonne National Laboratory in April and May of 1992. Noninvasive geophysical surveys, including magnetics, electrical resistivity, and ground-penetrating radar, were conducted around the perimeter of the building to guide a sampling program prior to decommissioning and dismantling. The large number of magnetic sources surrounding the building are believed to be contained in construction fill. The smaller anomalies, for the most part, were not imaged with ground radar or by electrical profiling. Large magnetic anomalies near the southwest comer of the building are due to aboveground standpipes and steel-reinforced concrete. Two high-resistivity areas, one projecting northeast from the building and another south of the original structure, may indicate the presence of organic pore fluids in the subsurface. A conductive lineament protruding from the south wall that is enclosed by the southem, high-resistivity feature is not associated with an equivalent magnetic anomaly. Magnetic and electrical anomalies south of the old landfill boundary are probably not associated with the building. The boundary is marked by a band of magnetic anomalies and a conductive zone trending northwest to southeast. The cause of high resistivities in a semicircular area in the southwest comer, within the landfill area, is unexplained

  6. An online survival analysis tool to rapidly assess the effect of 22,277 genes on breast cancer prognosis using microarray data of 1,809 patients

    DEFF Research Database (Denmark)

    Györffy, B; Lanczky, A; Eklund, Aron Charles

    2010-01-01

    Validating prognostic or predictive candidate genes in appropriately powered breast cancer cohorts are of utmost interest. Our aim was to develop an online tool to draw survival plots, which can be used to assess the relevance of the expression levels of various genes on the clinical outcome both...... this integrative data analysis tool to confirm the prognostic power of the proliferation-related genes TOP2A and TOP2B, MKI67, CCND2, CCND3, CCNDE2, as well as CDKN1A, and TK2. We also validated the capability of microarrays to determine estrogen receptor status in 1,231 patients. The tool is highly valuable...

  7. [Blended-learning in psychosomatics and psychotherapy - Increasing the satisfaction and knowledge of students with a web-based e-learning tool].

    Science.gov (United States)

    Ferber, Julia; Schneider, Gudrun; Havlik, Linda; Heuft, Gereon; Friederichs, Hendrik; Schrewe, Franz-Bernhard; Schulz-Steinel, Andrea; Burgmer, Markus

    2014-01-01

    To improve the synergy of established methods of teaching, the Department of Psychosomatics and Psychotherapy, University Hospital Münster, developed a web-based elearning tool using video clips of standardized patients. The effect of this blended-learning approach was evaluated. A multiple-choice test was performed by a naive (without the e-learning tool) and an experimental (with the tool) cohort of medical students to test the groups' expertise in psychosomatics. In addition, participants' satisfaction with the new tool was evaluated (numeric rating scale of 0-10). The experimental cohort was more satisfied with the curriculum and more interested in psychosomatics. Furthermore, the experimental cohort scored significantly better in the multiple-choice test. The new tool proved to be an important addition to the classical curriculum as a blended-learning approach which improves students' satisfaction and knowledge in psychosomatics.

  8. PIMiner: A web tool for extraction of protein interactions from biomedical literature

    KAUST Repository

    Chowdhary, Rajesh

    2013-01-01

    Information on Protein Interactions (PIs) is valuable for biomedical research, but often lies buried in the scientific literature and cannot be readily retrieved. While much progress has been made over the years in extracting PIs from the literature using computational methods, there is a lack of free, public, user-friendly tools for the discovery of PIs. We developed an online tool for the extraction of PI relationships from PubMed-abstracts, which we name PIMiner. Protein pairs and the words that describe their interactions are reported by PIMiner so that new interactions can be easily detected within text. The interaction likelihood levels are reported too. The option to extract only specific types of interactions is also provided. The PIMiner server can be accessed through a web browser or remotely through a client\\'s command line. PIMiner can process 50,000 PubMed abstracts in approximately 7 min and thus appears suitable for large-scale processing of biological/biomedical literature. Copyright © 2013 Inderscience Enterprises Ltd.

  9. Transforming narratives into educational tools: the collaborative development of a transformative learning tool based on Nicaraguan adolescents' creative writing about intimate partner violence.

    Science.gov (United States)

    Singleton, Robyn; Picado Araúz, María de la Paz; Trocin, Kathleen; Winskell, Kate

    2017-01-01

    The use of narrative has become increasingly popular in the public health, community development, and education fields. Via emotionally engaging plotlines with authentic, captivating characters, stories provide an opportunity for participants to be carried away imaginatively into the characters' world while connecting the story with their own lived experiences. Stories have been highlighted as valuable tools in transformative learning. However, little published literature exists demonstrating applications of stories in group-based transformative learning curricula. This paper describes the creation of a narrative-based transformative learning tool based on an analysis of Nicaraguan adolescents' meaning-making around intimate partner violence (IPV) in their creative narratives. In collaboration with a Nicaraguan organization, US researchers analyzed a sample of narratives ( n = 55; 16 male-authored, 39 female-authored) on IPV submitted to a 2014 scriptwriting competition by adolescents aged 15-19. The data were particularly timely in that they responded to a new law protecting victims of gender-based violence, Law 779, and contradicted social-conservative claims that the Law 779 destroys family unity. We incorporated results from this analysis into the creation of the transformative learning tool, separated into thematic sections. The tool's sections (which comprise one story and three corresponding activities) aim to facilitate critical reflection, interpersonal dialogue, and self- and collective efficacy for social action around the following themes derived from the analysis: IPV and social support; IPV and romantic love; masculinity; warning signs of IPV; and sexual abuse. As a collaboration between a public health research team based at a US university and a Nicaraguan community-based organization, it demonstrates the potential in the age of increasingly smooth electronic communication for novel community-university partnerships to facilitate the development of

  10. Communication tools between Grid virtual organisations, middleware deployers and sites

    CERN Document Server

    Dimou, Maria

    2008-01-01

    Grid Deployment suffers today from the difficulty to reach users and site administrators when a package or a configuration parameter changes. Release notes, twiki pages and news’ broadcasts are not efficient enough. The interest of using GGUS as an efficient and effective intra-project communication tool is the message to the user community presented here. The purpose of GGUS is to bring together End Users and Supporters in the Regions where the Grid is deployed and in operation. Today’s Grid usage is still very far from the simplicity and functionality of the web. While pressing for middleware usability, we try to turn the Global Grid User Support (GGUS) into the central tool for identifying areas in the support environment that need attention. To do this, we exploit GGUS' capacity to expand, by including new Support Units that follow the project's operational structure. Using tailored GGUS database searches we obtain concrete results that prove where we need to improve procedures, Service Level Agreemen...

  11. Effect of tool shape and welding parameters on mechanical properties and microstructure of dissimilar friction stir welded aluminium alloys

    Directory of Open Access Journals (Sweden)

    Chetan Aneja

    2016-07-01

    Full Text Available In the present experimental study, dissimilar aluminum alloy AA5083 and AA6082 were friction stir welded by varying tool shape, welding speed and rotary speed of the tool in order to investigate the effect of varying tool shape and welding parameters on the mechanical properties as well as microstructure. The friction stir welding (FSW process parameters have great influence on heat input per unit length of weld. The outcomes of experimental study prove that mechanical properties increases with decreasing welding speed. Furthermore mechanical properties were also found to improve as the rotary speed increases and the same phenomenon was found to happen while using straight cylindrical threaded pin profile tool. The microstructure of the dissimilar joints revealed that at low welding speeds, the improved material mixing was observed. The similar phenomenon was found to happen at higher rotational speeds using straight cylindrical threaded tool.

  12. GC Analyses of Salvia Seeds as Valuable Essential Oil Source

    Directory of Open Access Journals (Sweden)

    Mouna Ben Taârit

    2014-01-01

    Full Text Available The essential oils of seeds of Salvia verbenaca, Salvia officinalis, and Salvia sclarea were obtained by hydrodistillation and analyzed by gas chromatography (GC and GC-mass spectrometry. The oil yields (w/w were 0.050, 0.047, and 0.045% in S. verbenaca, S. sclarea, and S. officinalis, respectively. Seventy-five compounds were identified. The essential oil composition of S. verbenaca seeds showed that over 57% of the detected compounds were oxygenated monoterpenes followed by sesquiterpenes (24.04% and labdane type diterpenes (5.61%. The main essential oil constituents were camphor (38.94%, caryophyllene oxide (7.28%, and 13-epi-manool (5.61%, while those of essential oil of S. officinalis were α-thujone (14.77%, camphor (13.08%, and 1,8-cineole (6.66%. In samples of S. sclarea, essential oil consists mainly of linalool (24.25%, α-thujene (7.48%, linalyl acetate (6.90%, germacrene-D (5.88%, bicyclogermacrene (4.29%, and α-copaene (4.08%. This variability leads to a large range of naturally occurring volatile compounds with valuable industrial and pharmaceutical outlets.

  13. 20 CFR 416.1603 - How to prove you are a resident of the United States.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false How to prove you are a resident of the United States. 416.1603 Section 416.1603 Employees' Benefits SOCIAL SECURITY ADMINISTRATION SUPPLEMENTAL... as— (1) Property, income, or other tax forms or receipts; (2) Utility bills, leases or rent payment...

  14. Data Grid tools: enabling science on big distributed data

    Energy Technology Data Exchange (ETDEWEB)

    Allcock, Bill [Mathematics and Computer Science, Argonne National Laboratory, Argonne, IL 60439 (United States); Chervenak, Ann [Information Sciences Institute, University of Southern California, Marina del Rey, CA 90291 (United States); Foster, Ian [Mathematics and Computer Science, Argonne National Laboratory, Argonne, IL 60439 (United States); Department of Computer Science, University of Chicago, Chicago, IL 60615 (United States); Kesselman, Carl [Information Sciences Institute, University of Southern California, Marina del Rey, CA 90291 (United States); Livny, Miron [Department of Computer Science, University of Wisconsin, Madison, WI 53705 (United States)

    2005-01-01

    A particularly demanding and important challenge that we face as we attempt to construct the distributed computing machinery required to support SciDAC goals is the efficient, high-performance, reliable, secure, and policy-aware management of large-scale data movement. This problem is fundamental to diverse application domains including experimental physics (high energy physics, nuclear physics, light sources), simulation science (climate, computational chemistry, fusion, astrophysics), and large-scale collaboration. In each case, highly distributed user communities require high-speed access to valuable data, whether for visualization or analysis. The quantities of data involved (terabytes to petabytes), the scale of the demand (hundreds or thousands of users, data-intensive analyses, real-time constraints), and the complexity of the infrastructure that must be managed (networks, tertiary storage systems, network caches, computers, visualization systems) make the problem extremely challenging. Data management tools developed under the auspices of the SciDAC Data Grid Middleware project have become the de facto standard for data management in projects worldwide. Day in and day out, these tools provide the 'plumbing' that allows scientists to do more science on an unprecedented scale in production environments.

  15. Data Grid tools: enabling science on big distributed data

    International Nuclear Information System (INIS)

    Allcock, Bill; Chervenak, Ann; Foster, Ian; Kesselman, Carl; Livny, Miron

    2005-01-01

    A particularly demanding and important challenge that we face as we attempt to construct the distributed computing machinery required to support SciDAC goals is the efficient, high-performance, reliable, secure, and policy-aware management of large-scale data movement. This problem is fundamental to diverse application domains including experimental physics (high energy physics, nuclear physics, light sources), simulation science (climate, computational chemistry, fusion, astrophysics), and large-scale collaboration. In each case, highly distributed user communities require high-speed access to valuable data, whether for visualization or analysis. The quantities of data involved (terabytes to petabytes), the scale of the demand (hundreds or thousands of users, data-intensive analyses, real-time constraints), and the complexity of the infrastructure that must be managed (networks, tertiary storage systems, network caches, computers, visualization systems) make the problem extremely challenging. Data management tools developed under the auspices of the SciDAC Data Grid Middleware project have become the de facto standard for data management in projects worldwide. Day in and day out, these tools provide the 'plumbing' that allows scientists to do more science on an unprecedented scale in production environments

  16. Using aetnanova to formally prove that the Davis-Putnam satisfiability test is correct

    Directory of Open Access Journals (Sweden)

    Eugenio G. Omodeo

    2008-05-01

    Full Text Available This paper reports on using the ÆtnaNova/Referee proof-verification system to formalize issues regarding the satisfiability of CNF-formulae of propositional logic. We specify an “archetype” version of the Davis-Putnam-Logemann-Loveland algorithm through the THEORY of recursive functions based on a well-founded relation, and prove it to be correct.Within the same framework, and by resorting to the Zorn lemma, we develop a straightforward proof of the compactness theorem.

  17. Aspects of tool production, use, and hafting in Palaeolithic assemblages from Northeast Africa.

    Science.gov (United States)

    Rots, Veerle; Van Peer, Philip; Vermeersch, Pierre M

    2011-05-01

    A detailed microwear study was performed on several assemblages from Northeast Africa to provide an anthropological scenario of late middle and upper Pleistocene populations in the Nile Valley and adjacent zones. Results are presented from the wear analysis of five sites, and an interpretation is provided of the keystones of MSA behaviour and its evolution throughout about 150,000 years. Locally available raw materials were predominantly used. Different tool uses were identified based on wear evidence, and it was demonstrated that stone tools were hafted from at least the early MSA onwards. In particular stone tools for which hafting was a necessity for their use, such as percussion implements and projectiles, were hafted. Both tool functions remain important throughout the Middle Stone Age. For tools with other uses, such as knives, hafting was demonstrated in certain cases. Hafting proved to be integrated into the stone tool production process, indicating a certain degree of anticipation and planning. Ochre was present at most of the sites in different forms, and mainly seems to have served a utilitarian function, and a possible symbolic use. The included sites could be interpreted as specialised sites, and in all but one case were situated in a production context. The evidence indicates the existence of a regional settlement system with different logistic nodes. Copyright © 2011 Elsevier Ltd. All rights reserved.

  18. PADLET AND OTHER INFORMATION COMMUNICATION TECHNOLOGY TOOLS IN ENGLISH LANGUAGE TEACHING

    Directory of Open Access Journals (Sweden)

    Tatiana Borisovna Lysunets

    2015-12-01

    Full Text Available The paper considers the necessity of the computerization of the education sphere. Information Communication Technology (ICT tools and services of Google, blended learning techniques help to enhance autonomous education and answer the training needs of future specia-lists. The paper describes the Padlet (Google application and provides with its practical usage in language classroom. The authors come to the following conclusions: improving Internet and computer technology competence through mastering various Internet tools and applications can be traced. Besides, the introduction of IT into traditional classroom intensifies the process of cognitive development and mental activities, forming the high level of students’ motivation and interest. For students the usage of IT proves the positive dynamics of their accomplishments in the field of selecting, organizing and dealing with information provided in various forms. It enhances students’ opportunities in creating, designing and performing their works and achievements.

  19. Trust as a valuable strategic variable in the food industry: different types of trust and their implementation

    NARCIS (Netherlands)

    Lindgreen, A.

    2003-01-01

    Although it is often suggested that trust is an important construct in relationship marketing, there is only little empirical evidence of how, if at all, trust may be used as a valuable strategic variable. In the 1990s, the international food industry faced a number of serious challenges, most

  20. Whey-derived valuable products obtained by microbial fermentation.

    Science.gov (United States)

    Pescuma, Micaela; de Valdez, Graciela Font; Mozzi, Fernanda

    2015-08-01

    Whey, the main by-product of the cheese industry, is considered as an important pollutant due to its high chemical and biological oxygen demand. Whey, often considered as waste, has high nutritional value and can be used to obtain value-added products, although some of them need expensive enzymatic synthesis. An economical alternative to transform whey into valuable products is through bacterial or yeast fermentations and by accumulation during algae growth. Fermentative processes can be applied either to produce individual compounds or to formulate new foods and beverages. In the first case, a considerable amount of research has been directed to obtain biofuels able to replace those derived from petrol. In addition, the possibility of replacing petrol-derived plastics by biodegradable polymers synthesized during bacterial fermentation of whey has been sought. Further, the ability of different organisms to produce metabolites commonly used in the food and pharmaceutical industries (i.e., lactic acid, lactobionic acid, polysaccharides, etc.) using whey as growth substrate has been studied. On the other hand, new low-cost functional whey-based foods and beverages leveraging the high nutritional quality of whey have been formulated, highlighting the health-promoting effects of fermented whey-derived products. This review aims to gather the multiple uses of whey as sustainable raw material for the production of individual compounds, foods, and beverages by microbial fermentation. This is the first work to give an overview on the microbial transformation of whey as raw material into a large repertoire of industrially relevant foods and products.

  1. Lobster processing by-products as valuable bioresource of marine functional ingredients, nutraceuticals, and pharmaceuticals.

    Science.gov (United States)

    Nguyen, Trung T; Barber, Andrew R; Corbin, Kendall; Zhang, Wei

    2017-01-01

    The worldwide annual production of lobster was 165,367 tons valued over $3.32 billion in 2004, but this figure rose up to 304,000 tons in 2012. Over half the volume of the worldwide lobster production has been processed to meet the rising global demand in diversified lobster products. Lobster processing generates a large amount of by-products (heads, shells, livers, and eggs) which account for 50-70% of the starting material. Continued production of these lobster processing by-products (LPBs) without corresponding process development for efficient utilization has led to disposal issues associated with costs and pollutions. This review presents the promising opportunities to maximize the utilization of LPBs by economic recovery of their valuable components to produce high value-added products. More than 50,000 tons of LPBs are globally generated, which costs lobster processing companies upward of about $7.5 million/year for disposal. This not only presents financial and environmental burdens to the lobster processors but also wastes a valuable bioresource. LPBs are rich in a range of high-value compounds such as proteins, chitin, lipids, minerals, and pigments. Extracts recovered from LPBs have been demonstrated to possess several functionalities and bioactivities, which are useful for numerous applications in water treatment, agriculture, food, nutraceutical, pharmaceutical products, and biomedicine. Although LPBs have been studied for recovery of valuable components, utilization of these materials for the large-scale production is still very limited. Extraction of lobster components using microwave, ultrasonic, and supercritical fluid extraction were found to be promising techniques that could be used for large-scale production. LPBs are rich in high-value compounds that are currently being underutilized. These compounds can be extracted for being used as functional ingredients, nutraceuticals, and pharmaceuticals in a wide range of commercial applications

  2. CT appearance of menetrier's disease (a report of 4 cases)

    International Nuclear Information System (INIS)

    Peng Weijun; Zhang Pei; Zhou Kangrong; Chen Huiming

    2000-01-01

    Objective: To define the CT imaging characteristic of menetrier's disease. Methods: Four patients with proved Menetrier's disease were retrospectively studied by means of CT performed with the water as oral contrast, hypotonic agent and dynamic or spiral CT technique. Results: All cases showed that the enlarged rugae were seen projecting into the gastric lumen, but the gastric wall was otherwise normal. CT detected all lesions and made a confirmed diagnosis before pathology biopsy. Conclusion: The primary result revealed that the CT appearance of Menetrier's disease was quite characteristic, CT is a very valuable tool for the diagnosis of Menetrier's disease

  3. Advantages of using webquests in EFL Classes in A Technical University

    Directory of Open Access Journals (Sweden)

    Marina Valeryevna Kuimova

    2015-12-01

    Full Text Available The main purpose of foreign language teaching is to learn to communicate and overcome the language barrier. The article studies the theoretical background of WebQuest as a valuable tool and proves that it helps learners to acquire linguistic and extra-linguistic knowledge. WebQuests ensure a context-based learning environment, help to broaden learners’ perspectives by widening ideas and concepts on different topics and acquiring creative, critical and problem-solving skills. The authors demonstrate positive outcomes of the work with WebQuest in foreign language classes at the Institute of Non-Destructive Testing, National Research Tomsk Polytechnic University.

  4. Anvendelse af computere som terapeutisk værktøj i arbejdet med teenagere med ASD -  et praktisk eksperiment

    DEFF Research Database (Denmark)

    Aagaard, Morten

    Much theory and pedagogical work has been devoted to improve the social competences of the individuals who suffer from ASD. The main activity has been human social interaction. B.J. Fogg has in his book, “Persuasive Technology” has proved, that technology can be used under certain conditions...... to change attitude or behavior for individuels. The experiments goal is to verify, how the kombination of a Personal Digital Assistents and the Persuasive functional role, social actors can be a valuable pedagogical tool when improving individuals, who suffers from ASD in a mild degree, social skills...

  5. Potential Cislunar and Interplanetary Proving Ground Excursion Trajectory Concepts

    Science.gov (United States)

    McGuire, Melissa L.; Strange, Nathan J.; Burke, Laura M.; MacDonald, Mark A.; McElrath, Timothy P.; Landau, Damon F.; Lantoine, Gregory; Hack, Kurt J.; Lopez, Pedro

    2016-01-01

    NASA has been investigating potential translunar excursion concepts to take place in the 2020s that would be used to test and demonstrate long duration life support and other systems needed for eventual Mars missions in the 2030s. These potential trajectory concepts could be conducted in the proving ground, a region of cislunar and near-Earth interplanetary space where international space agencies could cooperate to develop the technologies needed for interplanetary spaceflight. Enabled by high power Solar Electric Propulsion (SEP) technologies, the excursion trajectory concepts studied are grouped into three classes of increasing distance from the Earth and increasing technical difficulty: the first class of excursion trajectory concepts would represent a 90-120 day round trip trajectory with abort to Earth options throughout the entire length, the second class would be a 180-210 day round trip trajectory with periods in which aborts would not be available, and the third would be a 300-400 day round trip trajectory without aborts for most of the length of the trip. This paper provides a top-level summary of the trajectory and mission design of representative example missions of these three classes of excursion trajectory concepts.

  6. The new designs of diamond drill bits for composite polymers tooling

    Directory of Open Access Journals (Sweden)

    Ruslan Yu. Melentiev

    2015-12-01

    Full Text Available The author explores the drilling operation of some new engineering materials such as carbon fiber reinforced plastics (CFRP and other polymers that have an anisotropic structure, high-strength and elastic properties combined with low heat endurance. Such combination of properties makes impossible the simple transfer of the existing technologies for classic materials working to considered new class. At the same time, the existing tools cannot assure the specified quality of tooled products at the current productivity and tool life. Aim: The aim of this research is to increase the process efficiency of diamond drilling in composite polymers by developing the new designs of diamond drill bits. Materials and Methods: One of the most promising directions to solve this problem is the diamond coated abrasive type tool. This paper addresses and classifies the existing types of diamond drill bits according to their application and operation. The literature data analysis of known disadvantages during drilling operation, the quality of surface and joining face was performed. Results: The experimental researches of the author prove the negative meaning of the already known but kept out fact – the drill core blocking. The most important factors and structural features affecting the CFRP drilling process are revealed. The accounting of these factors allowed creating the set of unique designs of diamond drill bits for different purposes. The presented patented models has different allowance distribution schemes and cutting forces, thus satisfy the mechanical requirements of quality, productivity, tool life and hole geometry in the tooling of the specified material class.

  7. Design and Implementation of a Cloud Computing Adoption Decision Tool: Generating a Cloud Road

    Science.gov (United States)

    Bildosola, Iñaki; Río-Belver, Rosa; Cilleruelo, Ernesto; Garechana, Gaizka

    2015-01-01

    Migrating to cloud computing is one of the current enterprise challenges. This technology provides a new paradigm based on “on-demand payment” for information and communication technologies. In this sense, the small and medium enterprise is supposed to be the most interested, since initial investments are avoided and the technology allows gradual implementation. However, even if the characteristics and capacities have been widely discussed, entry into the cloud is still lacking in terms of practical, real frameworks. This paper aims at filling this gap, presenting a real tool already implemented and tested, which can be used as a cloud computing adoption decision tool. This tool uses diagnosis based on specific questions to gather the required information and subsequently provide the user with valuable information to deploy the business within the cloud, specifically in the form of Software as a Service (SaaS) solutions. This information allows the decision makers to generate their particular Cloud Road. A pilot study has been carried out with enterprises at a local level with a two-fold objective: to ascertain the degree of knowledge on cloud computing and to identify the most interesting business areas and their related tools for this technology. As expected, the results show high interest and low knowledge on this subject and the tool presented aims to readdress this mismatch, insofar as possible. PMID:26230400

  8. Design and Implementation of a Cloud Computing Adoption Decision Tool: Generating a Cloud Road.

    Directory of Open Access Journals (Sweden)

    Iñaki Bildosola

    Full Text Available Migrating to cloud computing is one of the current enterprise challenges. This technology provides a new paradigm based on "on-demand payment" for information and communication technologies. In this sense, the small and medium enterprise is supposed to be the most interested, since initial investments are avoided and the technology allows gradual implementation. However, even if the characteristics and capacities have been widely discussed, entry into the cloud is still lacking in terms of practical, real frameworks. This paper aims at filling this gap, presenting a real tool already implemented and tested, which can be used as a cloud computing adoption decision tool. This tool uses diagnosis based on specific questions to gather the required information and subsequently provide the user with valuable information to deploy the business within the cloud, specifically in the form of Software as a Service (SaaS solutions. This information allows the decision makers to generate their particular Cloud Road. A pilot study has been carried out with enterprises at a local level with a two-fold objective: to ascertain the degree of knowledge on cloud computing and to identify the most interesting business areas and their related tools for this technology. As expected, the results show high interest and low knowledge on this subject and the tool presented aims to readdress this mismatch, insofar as possible.

  9. Design and Implementation of a Cloud Computing Adoption Decision Tool: Generating a Cloud Road.

    Science.gov (United States)

    Bildosola, Iñaki; Río-Belver, Rosa; Cilleruelo, Ernesto; Garechana, Gaizka

    2015-01-01

    Migrating to cloud computing is one of the current enterprise challenges. This technology provides a new paradigm based on "on-demand payment" for information and communication technologies. In this sense, the small and medium enterprise is supposed to be the most interested, since initial investments are avoided and the technology allows gradual implementation. However, even if the characteristics and capacities have been widely discussed, entry into the cloud is still lacking in terms of practical, real frameworks. This paper aims at filling this gap, presenting a real tool already implemented and tested, which can be used as a cloud computing adoption decision tool. This tool uses diagnosis based on specific questions to gather the required information and subsequently provide the user with valuable information to deploy the business within the cloud, specifically in the form of Software as a Service (SaaS) solutions. This information allows the decision makers to generate their particular Cloud Road. A pilot study has been carried out with enterprises at a local level with a two-fold objective: to ascertain the degree of knowledge on cloud computing and to identify the most interesting business areas and their related tools for this technology. As expected, the results show high interest and low knowledge on this subject and the tool presented aims to readdress this mismatch, insofar as possible.

  10. The Chinese version of monitoring and evaluation system strengthening tool for human immunodeficiency virus (HIV) capacity building: Development and evaluation.

    Science.gov (United States)

    Zhao, Ran; Chen, Ren; Zhang, Bing; Ma, Ying; Qin, Xia; Hu, Zhi

    2015-08-01

    Monitoring and evaluation (M&E) for human immunodeficiency virus (HIV) capacity building has become a significant step for HIV prevention and control. The M&E system strengthening tool published by the United Nations Joint Programme on HIV/AIDS (UNAIDS) was intended to be the most authoritative assessment tool internationally. Facing the fact that the M&E system in China did not function at an optimum level, we considered taking the international standards for reference. By linguistic validating and different stages' discussions and revisions, we came up with the Chinese version of the capacity diagnosis tool with at least 12 components and tested its validity and reliability. The tool turned out to have a sufficiently linguistic validation and proved to be a scientific and feasible instrument which was suitable for China's national conditions.

  11. The intrapreneur: A distinct and valuable role to be institutionalized and strategically managed

    DEFF Research Database (Denmark)

    Ashourizadeh, Shayegheh; Schøtt, Thomas

    are distinct from routine employees and somewhat similar to entrepreneurs. Thereby intrapreneurs are a human resource that by developing new activities for their employer and also by creating new jobs is very valuable. – The rate of intrapreneurship among employees is higher in Denmark than in almost all other......, especially in Denmark, to adopt strategies for institutionalization and management of this human resource....... more frequently than routine employees are self-efficacious, opportunity-perceiving, risk-willing and role-modeling starters, have meaningful and autonomous jobs, and are satisfied with their jobs and salary, but also experience more stress in work; and in these job-characteristics intrapreneurs...

  12. Using intervention mapping to develop a work-related guidance tool for those affected by cancer

    Directory of Open Access Journals (Sweden)

    Munir Fehmidah

    2013-01-01

    Full Text Available Abstract Background Working-aged individuals diagnosed and treated for cancer require support and assistance to make decisions regarding work. However, healthcare professionals do not consider the work-related needs of patients and employers do not understand the full impact cancer can have upon the employee and their work. We therefore developed a work-related guidance tool for those diagnosed with cancer that enables them to take the lead in stimulating discussion with a range of different healthcare professionals, employers, employment agencies and support services. The tool facilitates discussions through a set of questions individuals can utilise to find solutions and minimise the impact cancer diagnosis, prognosis and treatment may have on their employment, sick leave and return to work outcomes. The objective of the present article is to describe the systematic development and content of the tool using Intervention Mapping Protocol (IMP. Methods The study used the first five steps of the intervention mapping process to guide the development of the tool. A needs assessment identified the ‘gaps’ in information/advice received from healthcare professionals and other stakeholders. The intended outcomes and performance objectives for the tool were then identified followed by theory-based methods and an implementation plan. A draft of the tool was developed and subjected to a two-stage Delphi process with various stakeholders. The final tool was piloted with 38 individuals at various stages of the cancer journey. Results The tool was designed to be a self-led tool that can be used by any person with a cancer diagnosis and working for most types of employers. The pilot study indicated that the tool was relevant and much needed. Conclusions Intervention Mapping is a valuable protocol for designing complex guidance tools. The process and design of this particular tool can lend itself to other situations both occupational and more health

  13. Using intervention mapping to develop a work-related guidance tool for those affected by cancer.

    Science.gov (United States)

    Munir, Fehmidah; Kalawsky, Katryna; Wallis, Deborah J; Donaldson-Feilder, Emma

    2013-01-05

    Working-aged individuals diagnosed and treated for cancer require support and assistance to make decisions regarding work. However, healthcare professionals do not consider the work-related needs of patients and employers do not understand the full impact cancer can have upon the employee and their work. We therefore developed a work-related guidance tool for those diagnosed with cancer that enables them to take the lead in stimulating discussion with a range of different healthcare professionals, employers, employment agencies and support services. The tool facilitates discussions through a set of questions individuals can utilise to find solutions and minimise the impact cancer diagnosis, prognosis and treatment may have on their employment, sick leave and return to work outcomes. The objective of the present article is to describe the systematic development and content of the tool using Intervention Mapping Protocol (IMP). The study used the first five steps of the intervention mapping process to guide the development of the tool. A needs assessment identified the 'gaps' in information/advice received from healthcare professionals and other stakeholders. The intended outcomes and performance objectives for the tool were then identified followed by theory-based methods and an implementation plan. A draft of the tool was developed and subjected to a two-stage Delphi process with various stakeholders. The final tool was piloted with 38 individuals at various stages of the cancer journey. The tool was designed to be a self-led tool that can be used by any person with a cancer diagnosis and working for most types of employers. The pilot study indicated that the tool was relevant and much needed. Intervention Mapping is a valuable protocol for designing complex guidance tools. The process and design of this particular tool can lend itself to other situations both occupational and more health-care based.

  14. Fractal geometry as a new approach for proving nanosimilarity: a reflection note.

    Science.gov (United States)

    Demetzos, Costas; Pippa, Natassa

    2015-04-10

    Nanosimilars are considered as new medicinal outcomes combining the generic drugs and the nanocarrier as an innovative excipient, in order to evaluate them as final products. They belong to the grey area - concerning the evaluation process - between generic drugs and biosimilar medicinal products. Generic drugs are well documented and a huge number of them are in market, replacing effectively the off-patent drugs. The scientific approach for releasing them to the market is based on bioequivalence studies, which are well documented and accepted by the regulatory agencies. On the other hand, the structural complexity of biological/biotechnology-derived products demands a new approach for the approval process taking into consideration that bioequivalence studies are not considered as sufficient as in generic drugs, and new clinical trials are needed to support their approval process of the product to the market. In proportion, due to technological complexity of nanomedicines, the approaches for proving the statistical identity or the similarity for generic and biosimilar products, respectively, with those of prototypes, are not considered as effective for nanosimilar products. The aim of this note is to propose a complementary approach which can provide realistic evidences concerning the nanosimilarity, based on fractal analysis. This approach is well fit with the structural complexity of nanomedicines and smooths the difficulties for proving the similarity between off-patent and nanosimilar products. Fractal analysis could be considered as the approach that completely characterizes the physicochemical/morphological characteristics of nanosimilar products and could be proposed as a start point for a deep discussion on nanosimilarity. Copyright © 2015 Elsevier B.V. All rights reserved.

  15. Improved molecular tools for sugar cane biotechnology.

    Science.gov (United States)

    Kinkema, Mark; Geijskes, Jason; Delucca, Paulo; Palupe, Anthony; Shand, Kylie; Coleman, Heather D; Brinin, Anthony; Williams, Brett; Sainz, Manuel; Dale, James L

    2014-03-01

    Sugar cane is a major source of food and fuel worldwide. Biotechnology has the potential to improve economically-important traits in sugar cane as well as diversify sugar cane beyond traditional applications such as sucrose production. High levels of transgene expression are key to the success of improving crops through biotechnology. Here we describe new molecular tools that both expand and improve gene expression capabilities in sugar cane. We have identified promoters that can be used to drive high levels of gene expression in the leaf and stem of transgenic sugar cane. One of these promoters, derived from the Cestrum yellow leaf curling virus, drives levels of constitutive transgene expression that are significantly higher than those achieved by the historical benchmark maize polyubiquitin-1 (Zm-Ubi1) promoter. A second promoter, the maize phosphonenolpyruvate carboxylate promoter, was found to be a strong, leaf-preferred promoter that enables levels of expression comparable to Zm-Ubi1 in this organ. Transgene expression was increased approximately 50-fold by gene modification, which included optimising the codon usage of the coding sequence to better suit sugar cane. We also describe a novel dual transcriptional enhancer that increased gene expression from different promoters, boosting expression from Zm-Ubi1 over eightfold. These molecular tools will be extremely valuable for the improvement of sugar cane through biotechnology.

  16. Medical student web-based formative assessment tool for renal pathology

    Directory of Open Access Journals (Sweden)

    Vanesa Bijol

    2015-03-01

    Full Text Available Background: Web-based formative assessment tools have become widely recognized in medical education as valuable resources for self-directed learning. Objectives: To explore the educational value of formative assessment using online quizzes for kidney pathology learning in our renal pathophysiology course. Methods: Students were given unrestricted and optional access to quizzes. Performance on quizzed and non-quizzed materials of those who used (‘quizzers’ and did not use the tool (‘non-quizzers’ was compared. Frequency of tool usage was analyzed and satisfaction surveys were utilized at the end of the course. Results: In total, 82.6% of the students used quizzes. The greatest usage was observed on the day before the final exam. Students repeated interactive and more challenging quizzes more often. Average means between final exam scores for quizzed and unrelated materials were almost equal for ‘quizzers’ and ‘non-quizzers’, but ‘quizzers’ performed statistically better than ‘non-quizzers’ on both, quizzed (p=0.001 and non-quizzed (p=0.024 topics. In total, 89% of surveyed students thought quizzes improved their learning experience in this course. Conclusions: Our new computer-assisted learning tool is popular, and although its use can predict the final exam outcome, it does not provide strong evidence for direct improvement in academic performance. Students who chose to use quizzes did well on all aspects of the final exam and most commonly used quizzes to practice for final exam. Our efforts to revitalize the course material and promote learning by adding interactive online formative assessments improved students’ learning experience overall.

  17. Ichthyoplankton Classification Tool using Generative Adversarial Networks and Transfer Learning

    KAUST Repository

    Aljaafari, Nura

    2018-04-15

    The study and the analysis of marine ecosystems is a significant part of the marine science research. These systems are valuable resources for fisheries, improving water quality and can even be used in drugs production. The investigation of ichthyoplankton inhabiting these ecosystems is also an important research field. Ichthyoplankton are fish in their early stages of life. In this stage, the fish have relatively similar shape and are small in size. The currently used way of identifying them is not optimal. Marine scientists typically study such organisms by sending a team that collects samples from the sea which is then taken to the lab for further investigation. These samples need to be studied by an expert and usually end needing a DNA sequencing. This method is time-consuming and requires a high level of experience. The recent advances in AI have helped to solve and automate several difficult tasks which motivated us to develop a classification tool for ichthyoplankton. We show that using machine learning techniques, such as generative adversarial networks combined with transfer learning solves such a problem with high accuracy. We show that using traditional machine learning algorithms fails to solve it. We also give a general framework for creating a classification tool when the dataset used for training is a limited dataset. We aim to build a user-friendly tool that can be used by any user for the classification task and we aim to give a guide to the researchers so that they can follow in creating a classification tool.

  18. Selecting analytical tools for characterization of polymersomes in aqueous solution

    DEFF Research Database (Denmark)

    Habel, Joachim Erich Otto; Ogbonna, Anayo; Larsen, Nanna

    2015-01-01

    Selecting the appropriate analytical methods for characterizing the assembly and morphology of polymer-based vesicles, or polymersomes are required to reach their full potential in biotechnology. This work presents and compares 17 different techniques for their ability to adequately report size....../purification. Of the analytical methods tested, Cryo-transmission electron microscopy and atomic force microscopy (AFM) turned out to be advantageous for polymersomes with smaller diameter than 200 nm, whereas confocal microscopy is ideal for diameters >400 nm. Polymersomes in the intermediate diameter range can be characterized...... using freeze fracture Cryo-scanning electron microscopy (FF-Cryo-SEM) and nanoparticle tracking analysis (NTA). Small angle X-ray scattering (SAXS) provides reliable data on bilayer thickness and internal structure, Cryo-TEM on multilamellarity. Taken together, these tools are valuable...

  19. Seismic proving test of ultimate piping strength (current status of preliminary tests)

    International Nuclear Information System (INIS)

    Suzuki, K.; Namita, Y.; Abe, H.; Ichihashi, I.; Suzuki, K.; Ishiwata, M.; Fujiwaka, T.; Yokota, H.

    2001-01-01

    In 1998 Fiscal Year, the 6 year program of piping tests was initiated with the following objectives: i) to clarify the elasto-plastic response and ultimate strength of nuclear piping, ii) to ascertain the seismic safety margin of the current seismic design code for piping, and iii) to assess new allowable stress rules. In order to resolve extensive technical issues before proceeding on to the seismic proving test of a large-scale piping system, a series of preliminary tests of materials, piping components and simplified piping systems is intended. In this paper, the current status of the material tests and the piping component tests is reported. (author)

  20. Discovering the Motivations of Students when Using an Online Learning Tool

    Directory of Open Access Journals (Sweden)

    Raafat George Saadé

    2015-07-01

    Full Text Available In an educational setting, the use of online learning tools impacts student performance. Motivation and beliefs play an important role in predicting student decisions to use these learning tools. However, IT-personality entailing playfulness on the web, perceived personal innovativeness, and enjoyment may have an impact on motivations. In this study, we investigate the influence of IT-personality traits on motivation and beliefs. The study includes 95 participants. A survey was conducted after using the learning tool for one semester. Assessment of the psychometric properties of the scales proved acceptable and confirmatory factor analysis supported the proposed hypotheses. With the exception of the impact of enjoyment on motivation, all other hypotheses demonstrate behavior different from other contexts: playfulness on the web and perceived personal innovativeness have little to no impact on motivation; motivation in turn has the opposite strong and significant effect on beliefs. Specifically, we found that motivation has a strong impact on students’ attitudes and consequently attitudes were found to determine intentions where the variance explained is 50% (attitude and 28% (intentions. These results give way to interesting interpretations as they relate to learning.

  1. Assessment of Lightning Transients on a De-Iced Rotor Blade with Predictive Tools and Coaxial Return Measurements

    Science.gov (United States)

    Guillet, S.; Gosmain, A.; Ducoux, W.; Ponçon, M.; Fontaine, G.; Desseix, P.; Perraud, P.

    2012-05-01

    The increasing use of composite materials in aircrafts primary structures has led to different problematics in the field of safety of flight in lightning conditions. The consequences of this technological mutation, which occurs in a parallel context of extension of electrified critical functions, are addressed by aircraft manufacturers through the enhancement of their available assessment means of lightning transient. On the one hand, simulation tools, provided an accurate description of aircraft design, are today valuable assessment tools, in both predictive and operative terms. On the other hand, in-house test means allow confirmation and consolidation of design office hardening solutions. The combined use of predictive simulation tools and in- house test means offers an efficient and reliable support for all aircraft developments in their various life-time stages. The present paper provides PREFACE research project results that illustrate the above introduced strategy on the de-icing system of the NH90 composite main rotor blade.

  2. Breast cancer staging with MR imaging

    International Nuclear Information System (INIS)

    Smathers, R.L.; D'Amelio, F.; Stockdale, F.

    1989-01-01

    Forty-three patients with biopsy-proved breast cancer underwent MR staging of the cervicothoracic spine, lumbosacral spine, liver, and thorax. In all cases, these findings have been compared with the results of clinical staging, laboratory tests, chest radiography, and radionuclide bone scanning. MR imaging was a valuable staging tool for patients with more than minimal breast cancer and indications for radionuclide bone scanning. MR imaging had the greatest clinical importance when it identified thoracic soft-tissue abnormalities, including axillary., lateral thoracic, supraclavicular, and mediastinal lymphadenopathy. The coronal and sagittal views were very valuable for detection of chest wall invasion, sternal involvement, and internal mammary adenopathy. Negative MR staging clinically reassured patients that aggressive local therapy bad curative potential. Positive MR staging avoided inappropriate aggressive local therapy and mastectomy. MR imaging can be recommended for improved breast cancer staging in patients with newly diagnosed breast cancer who have more than minimal disease

  3. Modeling Tools for Drilling, Reservoir Navigation, and Formation Evaluation

    Directory of Open Access Journals (Sweden)

    Sushant Dutta

    2012-06-01

    successfully explains the unusual curve separations of an array laterolog tool in a shale-gas formation. The third example uses two-dimensional (2-D and 3-D modeling to prove the efficacy of a new borehole technology for reservoir monitoring.

  4. Enrichment of valuable elements from vanadium slag using superconducting HGMS technology

    Energy Technology Data Exchange (ETDEWEB)

    He, Sai; Yang, Chang Qiao; Li, Su Qin; Zhang, Chang Quan [School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing (China)

    2017-03-15

    Vanadium slags is a kind of vanadiferous solid waste from steelmaking process. It not only occupies land, pollutes environment, but also leads to waste of resources. Based on the difference of magnetic susceptibility of different particles caused by their chemical and physical properties from vanadium slag, a new technology, superconducting high gradient magnetic separation was investigated for separation and extraction of valuable substances from vanadium slag. The magnetic concentrate was obtained under optimal parameters, i.e., a particle size -200 mesh, a magnetic flux density of 0.8 T, a slurry concentration of 5 g/L, an amount of steel wools of 25 g and a slurry flow velocity of 2 L/min. The content of Fe{sub 2}O{sub 3} in concentrate could be increased from 39.6% to 55.0% and V2O5 from 2.5% to 4.0%, respectively. The recovery rate is up to 42.9%, and the vanadium slag has been effectively reused.

  5. Twister Protein: a ludic tool involving protein synthesis

    Directory of Open Access Journals (Sweden)

    Aline Weyh

    2015-07-01

    Full Text Available Several studies show that students of various grade levels report the Genetics as an abstract theme and difficult to assimilate by the students, with multiple problems in the teaching-learning process and becoming necessary the development of auxiliary practices. Among the teaching tools, the game is the most currently opted playful activity by stimulating multiple intelligences, allowing greater student-teacher interaction. This work seeks the production of an innovative and dynamic educational game, Twister Protein, as a pedagogical resource for Genetics discipline. The development of the game was based on the use of easily accessible and low cost materials by teachers, allowing the knowledge of transcription, translation and protein folding. The activity was proposed and applied in the classroom with pilot undergraduate students. The fun associated with the knowledge of science not only allowed a better memorization of the content addressed, as aroused the curiosity, theme reflection, character building and collaborative spirits, as well as competitiveness through the interaction between class. This practice proved to be an effective tool in the escape from routine and fault repair of the theoretical process.

  6. Integrating strategic environmental assessment with industry planning: a case study of the Pasquai-Porcupine forest management plan, Saskatchewan, Canada.

    Science.gov (United States)

    Noble, Bram F

    2004-03-01

    Strategic environmental assessment (SEA) is gaining widespread recognition as a tool for integrating environmental considerations in policy, plan, and program development and decision-making. Notwithstanding the potential of SEA to improve higher-order decision processes, there has been very little attention given to integrating SEA with industry planning practices. As a result, the benefits of SEA have yet to be fully realized among industrial proponents. That said, SEA practice is ongoing, albeit informally and often under a different label, and is proving to be a valuable tool for industry planning and decision-making. Based on a case study of the Pasquai-Porcupine forest management plan in Saskatchewan, Canada, this paper illustrates how an integrated approach to SEA can contribute to industry environmental decision-making and can enhance the quality and deliverability of industry plans.

  7. Participatory design of probability-based decision support tools for in-hospital nurses.

    Science.gov (United States)

    Jeffery, Alvin D; Novak, Laurie L; Kennedy, Betsy; Dietrich, Mary S; Mion, Lorraine C

    2017-11-01

    To describe nurses' preferences for the design of a probability-based clinical decision support (PB-CDS) tool for in-hospital clinical deterioration. A convenience sample of bedside nurses, charge nurses, and rapid response nurses (n = 20) from adult and pediatric hospitals completed participatory design sessions with researchers in a simulation laboratory to elicit preferred design considerations for a PB-CDS tool. Following theme-based content analysis, we shared findings with user interface designers and created a low-fidelity prototype. Three major themes and several considerations for design elements of a PB-CDS tool surfaced from end users. Themes focused on "painting a picture" of the patient condition over time, promoting empowerment, and aligning probability information with what a nurse already believes about the patient. The most notable design element consideration included visualizing a temporal trend of the predicted probability of the outcome along with user-selected overlapping depictions of vital signs, laboratory values, and outcome-related treatments and interventions. Participants expressed that the prototype adequately operationalized requests from the design sessions. Participatory design served as a valuable method in taking the first step toward developing PB-CDS tools for nurses. This information about preferred design elements of tools that support, rather than interrupt, nurses' cognitive workflows can benefit future studies in this field as well as nurses' practice. Published by Oxford University Press on behalf of the American Medical Informatics Association 2017. This work is written by US Government employees and is in the public domain in the United States.

  8. The ChIP-Seq tools and web server: a resource for analyzing ChIP-seq and other types of genomic data.

    Science.gov (United States)

    Ambrosini, Giovanna; Dreos, René; Kumar, Sunil; Bucher, Philipp

    2016-11-18

    ChIP-seq and related high-throughput chromatin profilig assays generate ever increasing volumes of highly valuable biological data. To make sense out of it, biologists need versatile, efficient and user-friendly tools for access, visualization and itegrative analysis of such data. Here we present the ChIP-Seq command line tools and web server, implementing basic algorithms for ChIP-seq data analysis starting with a read alignment file. The tools are optimized for memory-efficiency and speed thus allowing for processing of large data volumes on inexpensive hardware. The web interface provides access to a large database of public data. The ChIP-Seq tools have a modular and interoperable design in that the output from one application can serve as input to another one. Complex and innovative tasks can thus be achieved by running several tools in a cascade. The various ChIP-Seq command line tools and web services either complement or compare favorably to related bioinformatics resources in terms of computational efficiency, ease of access to public data and interoperability with other web-based tools. The ChIP-Seq server is accessible at http://ccg.vital-it.ch/chipseq/ .

  9. MSX-3D: a tool to validate 3D protein models using mass spectrometry.

    Science.gov (United States)

    Heymann, Michaël; Paramelle, David; Subra, Gilles; Forest, Eric; Martinez, Jean; Geourjon, Christophe; Deléage, Gilbert

    2008-12-01

    The technique of chemical cross-linking followed by mass spectrometry has proven to bring valuable information about the protein structure and interactions between proteic subunits. It is an effective and efficient way to experimentally investigate some aspects of a protein structure when NMR and X-ray crystallography data are lacking. We introduce MSX-3D, a tool specifically geared to validate protein models using mass spectrometry. In addition to classical peptides identifications, it allows an interactive 3D visualization of the distance constraints derived from a cross-linking experiment. Freely available at http://proteomics-pbil.ibcp.fr

  10. A Contribution to Guide the Use of Support Tools for Technology Roadmapping: a Case Study in the Clothing Industry

    Directory of Open Access Journals (Sweden)

    Cindy Johanna Ibarra González

    2013-12-01

    Full Text Available This article presents guidelines regarding the use of tools to support technology roadmapping based on a case study of an exploratory and descriptive nature in a small company in the clothing sector. After introducing a systematic approach to technology roadmapping with their support tools, an empirical analysis is then presented of the application of the tools of the market layer – a questionnaire for consultation with the consumers and bibliographical research – and the business layer – SWOT matrix, through illustrative examples. Each tool was analyzed in relation to the complexity, time, cost of implementation, relevance and quality of the resulting information, the most common problems associated with their use. Here we show that the tools of the market layer proved to be easiest to use when compared with the tools of business layer, varying the time required, but involving, in general, a low cost in its application to obtain relevant and quality results for the development of the roadmap. Based on the results, general guidelines for the use of these tools to assist in the process of technology roadmapping were established as well as a comparison between the tools.

  11. Tool Wear and Formation Mechanism of White Layer When Hard Milling H13 Steel under Different Cooling/Lubrication Conditions

    Directory of Open Access Journals (Sweden)

    Song Zhang

    2014-04-01

    Full Text Available The present work aims at revealing the formation mechanism of white layer and understanding the effects of tool wear and cooling/lubrication condition on white layer when hard milling H13 steel with coated cutting tools. Hard milling experiments were carried out, and tool wear and its effect on formation of white layer were investigated. Compared to dry cutting condition, CMQL (cryogenic minimum quantity lubrication technique can obviously reduce tool wear and prolong tool life owing to its good cooling and lubrication properties. The optical images of the subsurface materials indicate that the formation of white layer is related to tool wear; moreover, the thickness of white layer increases with the increase of tool wear. SEM (scanning electron microscope images and XRD (X-ray diffraction analysis confirm that the formation of white layer is mainly due to the mechanical effect rather than the thermal effect. It also proves that white layer is partly decreased or can be totally eliminated by optimizing process parameters under CMQL cutting condition. CMQL technique has the potential to be used for achieving prolonged tool life and enhanced surface integrity.

  12. Wind tunnel experiments to prove a hydraulic passive torque control concept for variable speed wind turbines

    NARCIS (Netherlands)

    Diepeveen, N.F.B.; Jarquin-Laguna, A.

    2014-01-01

    In this paper the results are presented of experiments to prove an innovative concept for passive torque control of variable speed wind turbines using fluid power technology. It is demonstrated that by correctly configuring the hydraulic drive train, the wind turbine rotor operates at or near

  13. The use of the "Objective Structured Assessment of Technical Skills" as an Assessment Tool Among Danish Vascular Surgeons in Training

    DEFF Research Database (Denmark)

    Lladó Grove, Gabriela; Langager Høgh, Annette; Nielsen, Judith

    2015-01-01

    OBJECTIVE: The concept of the Objective Structured Assessment of Technical Skills (OSATS) is to quantify surgical skills in an objective way and, thereby, produce an additional procedure-specific assessment tool. Since 2005, a 2-day practical course for upcoming specialist registrars in vascular...... surgery has been obligatory. The aim of this study is to describe the results from a tailored OSATS test as a tool for the evaluation of practical skills during an intensive training session in a simple simulator box for vascular anastomoses. METHOD: Between 2005 and 2013, we registered the OSATS scores......, or the experience with vascular anastomoses and outcomes. CONCLUSION: OSATS is a valuable tool for evaluating the advancement of technical skills during an intensive practical course in performing vascular anastomoses. (C) 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights...

  14. EcoBrowser: a web-based tool for visualizing transcriptome data of Escherichia coli

    Directory of Open Access Journals (Sweden)

    Jia Peng

    2011-10-01

    Full Text Available Abstract Background Escherichia coli has been extensively studied as a prokaryotic model organism whose whole genome was determined in 1997. However, it is difficult to identify all the gene products involved in diverse functions by using whole genome sequencesalone. The high-resolution transcriptome mapping using tiling arrays has proved effective to improve the annotation of transcript units and discover new transcripts of ncRNAs. While abundant tiling array data have been generated, the lack of appropriate visualization tools to accommodate and integrate multiple sources of data has emerged. Findings EcoBrowser is a web-based tool for visualizing genome annotations and transcriptome data of E. coli. Important tiling array data of E. coli from different experimental platforms are collected and processed for query. An AJAX based genome browser is embedded for visualization. Thus, genome annotations can be compared with transcript profiling and genome occupancy profiling from independent experiments, which will be helpful in discovering new transcripts including novel mRNAs and ncRNAs, generating a detailed description of the transcription unit architecture, further providing clues for investigation of prokaryotic transcriptional regulation that has proved to be far more complex than previously thought. Conclusions With the help of EcoBrowser, users can get a systemic view both from the vertical and parallel sides, as well as inspirations for the design of new experiments which will expand our understanding of the regulation mechanism.

  15. 20 CFR 1002.33 - Does the employee have to prove that the employer discriminated against him or her in order to be...

    Science.gov (United States)

    2010-04-01

    ... employer discriminated against him or her in order to be eligible for reemployment? 1002.33 Section 1002.33... have to prove that the employer discriminated against him or her in order to be eligible for reemployment? No. The employee is not required to prove that the employer discriminated against him or her...

  16. Conversion of waste polystyrene through catalytic degradation into valuable products

    Energy Technology Data Exchange (ETDEWEB)

    Shah, Jasmin; Jan, Muhammad Rasul; Adnan [University of Peshawar, Peshawar (Pakistan)

    2014-08-15

    Waste expanded polystyrene (EPS) represents a source of valuable chemical products like styrene and other aromatics. The catalytic degradation was carried out in a batch reactor with a mixture of polystyrene (PS) and catalyst at 450 .deg. C for 30 min in case of Mg and at 400 .deg. C for 2 h both for MgO and MgCO{sub 3} catalysts. At optimum degradation conditions, EPS was degraded into 82.20±3.80 wt%, 91.60±0.20 wt% and 81.80±0.53 wt% liquid with Mg, MgO and MgCO{sub 3} catalysts, respectively. The liquid products obtained were separated into different fractions by fractional distillation. The liquid fractions obtained with three catalysts were compared, and characterized using GC-MS. Maximum conversion of EPS into styrene monomer (66.6 wt%) was achieved with Mg catalyst, and an increase in selectivity of compounds was also observed. The major fraction at 145 .deg. C showed the properties of styrene monomer. The results showed that among the catalysts used, Mg was found to be the most effective catalyst for selective conversion into styrene monomer as value added product.

  17. Small angle x-ray scattering as a potential tool for cancer diagnosis

    International Nuclear Information System (INIS)

    Kitchen, M.; Siu, K.K.W.; Lewis, R.A.

    2003-01-01

    Full text: The diagnostic potential of Small Angle X-ray Scattering (SAXS) patterns has recently been investigated for malignant breast tissues. The demonstrated systematic differences in the scattering signatures of malignant, benign and normal breast tissue specimens are believed to arise from the changes in the fibrous proteins making up the extracellular matrix (ECM) with the disease progression. The technique may also have the potential to aid in the diagnosis of gliomas, a highly aggressive type of brain tumour. Although complex and difficult to interpret, SAXS data from malignant tissues may prove to be a more effective classification tool than conventional histology techniques. Here we present the methodology of the technique, as applied to breast cancer and brain tumour specimens to date, and some directions for future investigations. We also present a novel analysis method, which employs wavelet decomposition and a naive Bayesian classifier, as a potential semi-automated classification tool

  18. Learn, see, practice, prove, do, maintain: an evidence-based pedagogical framework for procedural skill training in medicine.

    Science.gov (United States)

    Sawyer, Taylor; White, Marjorie; Zaveri, Pavan; Chang, Todd; Ades, Anne; French, Heather; Anderson, JoDee; Auerbach, Marc; Johnston, Lindsay; Kessler, David

    2015-08-01

    Acquisition of competency in procedural skills is a fundamental goal of medical training. In this Perspective, the authors propose an evidence-based pedagogical framework for procedural skill training. The framework was developed based on a review of the literature using a critical synthesis approach and builds on earlier models of procedural skill training in medicine. The authors begin by describing the fundamentals of procedural skill development. Then, a six-step pedagogical framework for procedural skills training is presented: Learn, See, Practice, Prove, Do, and Maintain. In this framework, procedural skill training begins with the learner acquiring requisite cognitive knowledge through didactic education (Learn) and observation of the procedure (See). The learner then progresses to the stage of psychomotor skill acquisition and is allowed to deliberately practice the procedure on a simulator (Practice). Simulation-based mastery learning is employed to allow the trainee to prove competency prior to performing the procedure on a patient (Prove). Once competency is demonstrated on a simulator, the trainee is allowed to perform the procedure on patients with direct supervision, until he or she can be entrusted to perform the procedure independently (Do). Maintenance of the skill is ensured through continued clinical practice, supplemented by simulation-based training as needed (Maintain). Evidence in support of each component of the framework is presented. Implementation of the proposed framework presents a paradigm shift in procedural skill training. However, the authors believe that adoption of the framework will improve procedural skill training and patient safety.

  19. A Sustainable and Selective Roasting and Water-Leaching Process to Simultaneously Extract Valuable Metals from Low-Grade Ni-Cu Matte

    Science.gov (United States)

    Cui, Fuhui; Mu, Wenning; Wang, Shuai; Xin, Haixia; Xu, Qian; Zhai, Yuchun

    2018-03-01

    Due to stringent environmental requirements and the complex occurrence of valuable metals, traditional pyrometallurgical methods are unsuitable for treating low-grade nickel-copper matte. A clean and sustainable two-stage sulfating roasting and water-leaching process was used to simultaneously extract valuable metals from low-grade nickel-copper matte. Ammonium and sodium sulfate were used as sulfating agents. The first roasting temperature, mass ratio of ammonium sulfate to matte, roasting time, dosage of sodium sulfate, second roasting temperature and leaching temperature were studied. Under optimal conditions, 98.89% of Ni, 97.48% of Cu and 95.82% of Co, but only 1.34% of Fe, were extracted. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to reveal the sulfating mechanism during the roasting process.

  20. Utilizing LMS tools to help with student assessment in an online course

    Directory of Open Access Journals (Sweden)

    Dudley B. Turner

    2015-07-01

    Full Text Available In online learning, feedback to students is important in their progress. Assessments are often final or summative assessments that do not allow the student to adjust or improve their learning progress. Assessment, however, takes valuable time. This paper describes how using the tools available in a LMS can assist faculty in assessing student work and provide helpful feedback to students in an online course. The tools available for faculty to use can be set up to save time for the faculty during assessments. The assignments in this study were developed based on previous research indicating assessment can be an aid to student learning, and students who know how well they are doing can make needed adjustments. Students used the feedback from these LMS tools to decide whether or not to try again or move on. Students had the opportunity for multiple attempts at assignments and received feedback on each to help measure their learning. The rubric tool was used to not only grade student papers but also to provide appropriate feedback for student performance on the levels of achievement. Quizzes can be automatically graded. Any additional attempts are drawn from a bank of questions. Results from this pilot study show the benefits of multiple attempts at quizzes and assignments. Students who took advantage of multiple attempts did improve their scores. The paper also discusses further research that to help support this practice.

  1. Seismic proving tests on the reliability for large components and equipment of nuclear power plants

    International Nuclear Information System (INIS)

    Ohno, Tokue; Tanaka, Nagatoshi

    1988-01-01

    Since Japan has destructive earthquakes frequently, the structural reliability for large components and equipment of nuclear power plants are rigorously required. They are designed using sophisticated seismic analyses and have not yet encountered a destructive earthquake. When nuclear power plants are planned, it is very important that the general public understand the structural reliability during and after an earthquake. Seismic Proving Tests have been planned by Ministry of International Trade and Industry (Miti) to comply with public requirement in Japan. A large-scale high-performance vibration table was constructed at Tasted Engineering Laboratory of Nuclear Power Engineering Test Center (NU PEC), in order to prove the structural reliability by vibrating the test model (of full scale or close to the actual size) in the condition of a destructive earthquake. As for the test models, the following four items were selected out of large components and equipment important to the safety: Reactor Containment Vessel; Primary Coolant Loop or Primary Loop Recirculation System; Reactor Pressure Vessel; and Reactor Core Internals. Here is described a brief of the vibration table, the test method and the results of the tests on PWR Reactor Containment Vessel and BWR Primary Loop Recirculation System (author)

  2. Community-based oral health promotion practices targeted at children and adolescents in Finland--developing an assessment tool.

    Science.gov (United States)

    Blomqvist, Pia; Ojala, Ellinoora; Kettunen, Tarja; Poskiparta, Marita; Kasila, Kirsti

    2014-06-01

    To develop an assessment tool for evaluating oral health promotion practices and to evaluate community-based oral health promotion practices targeted at children and adolescents with this tool. A theoretical framework about health promotion planning, implementation and evaluation was made on the basis of a literature review. Then, information about Finnish community-based oral health promotion practices (n=12) targeted at children and adolescents was collected using semi-structured interviews. Also, related documents, for example action plans and reports, were collected when available. Next, an assessment tool based on the theoretical framework was developed, and the recorded and transcribed interview data and other documents were evaluated with this tool. The assessment tool proved to be practical: it pointed out the strengths and weaknesses of the practices. The tool revealed strengths in the implementation and deficiencies in the planning and evaluation of oral health promotion practices. One-quarter of the 12 practices assessed could be considered 'good practices'. There is a need to improve the planning and evaluation of oral health promotion practices. The assessment tool developed in this study might be useful for practitioners both in the field of oral health promotion and general health promotion. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  3. Investigation of a valuable biochemical indicator in radiotherapy. Pt. 2

    International Nuclear Information System (INIS)

    Horvath, M.; Geszti, O.; Benedek, E.; Farkas, J.; Reischl, G.

    1979-01-01

    The hemoglobin level of blood plasma is a sensitive tool in measuring radiation effects. Its value has increased in most of the cases during radiotherapy of cancer patients even applied at low doses. Haptoglobins behave similarly, the timedependent changes during radiotherapy are almost identical at both parameters. (orig.) [de

  4. Activating Processes in the Brand Communication of Valuable Brands on the example of Coca-Cola.

    OpenAIRE

    Pöhler, Marie-Luise

    2017-01-01

    Everyone in the world, from the streets of Paris to the villages in Africa, knows the logo with the white letters that are written on a bright red background. Coca-Cola was introduced in 1886. In that year, only nine glasses of the soda drink were sold per day. So how did the little company from Atlanta become the world’s most valuable and popular soft drink? One of the company’s secrets is its emotional and memorable advertising strategies. Therefore, this thesis explains and analyzes ho...

  5. Visualizing Cloud Properties and Satellite Imagery: A Tool for Visualization and Information Integration

    Science.gov (United States)

    Chee, T.; Nguyen, L.; Smith, W. L., Jr.; Spangenberg, D.; Palikonda, R.; Bedka, K. M.; Minnis, P.; Thieman, M. M.; Nordeen, M.

    2017-12-01

    Providing public access to research products including cloud macro and microphysical properties and satellite imagery are a key concern for the NASA Langley Research Center Cloud and Radiation Group. This work describes a web based visualization tool and API that allows end users to easily create customized cloud product and satellite imagery, ground site data and satellite ground track information that is generated dynamically. The tool has two uses, one to visualize the dynamically created imagery and the other to provide access to the dynamically generated imagery directly at a later time. Internally, we leverage our practical experience with large, scalable application practices to develop a system that has the largest potential for scalability as well as the ability to be deployed on the cloud to accommodate scalability issues. We build upon NASA Langley Cloud and Radiation Group's experience with making real-time and historical satellite cloud product information, satellite imagery, ground site data and satellite track information accessible and easily searchable. This tool is the culmination of our prior experience with dynamic imagery generation and provides a way to build a "mash-up" of dynamically generated imagery and related kinds of information that are visualized together to add value to disparate but related information. In support of NASA strategic goals, our group aims to make as much scientific knowledge, observations and products available to the citizen science, research and interested communities as well as for automated systems to acquire the same information for data mining or other analytic purposes. This tool and the underlying API's provide a valuable research tool to a wide audience both as a standalone research tool and also as an easily accessed data source that can easily be mined or used with existing tools.

  6. Vibration Diagnostics as an effective Tool for Testing Engines of Internal Combustion

    Directory of Open Access Journals (Sweden)

    Ferenc Dömötör

    2017-10-01

    Full Text Available There are several methods of automotive diagnostics used in services to detect a large variety of faults and damages of various parts of engines of internal combustion. Undoubtedly, they are effective, but they are simply unable to find all types of mechanical faults occurring during the operation. This is the reason why authors of this paper tried to use a special tool, which has been proven for years for detecting faults of rolling element bearing in rotating machinery. During their research, the authors tried to find valuable results by measuring vibration of various parts of engines. Three items were tested, a Diesel engine and two Otto motors. A large number of measurements have been taken at various speed, at different points, in different directions, with different parameter setup, etc. However, there was one setup which has been applied to all three engines. It is the measurement setup of vibration velocity, in the frequency range of 2 Hz-300 Hz. Valuable consequences have been found regarding the clogging of the air filters and the exhaust systems. As a conclusion the authors expressed their opinion, that, apart from the traditional diagnostic methods used in services, vibration measurements can also be useful, especially for detecting faults of rolling element bearings.

  7. Analogies in Medicine: Valuable for Learning, Reasoning, Remembering and Naming

    Science.gov (United States)

    Pena, Gil Patrus; Andrade-Filho, Jose de Souza

    2010-01-01

    Analogies are important tools in human reasoning and learning, for resolving problems and providing arguments, and are extensively used in medicine. Analogy and similarity involve a structural alignment or mapping between domains. This cognitive mechanism can be used to make inferences and learn new abstractions. Through analogies, we try to…

  8. Optimization of protection as a decision-making tool, for radioactive waste disposal

    International Nuclear Information System (INIS)

    Bragg, K.

    1988-01-01

    Politically-based considerations and processes including public perception and confidence appear to be the basis for real decisions affecting waste management activities such as siting, construction, operation and monitoring. Optimization of radiation protection is not a useful general tool for waste disposal decision making. Optimization of radiation protection is essentially a technical tool which can, under appropriate circumstances, provide a clear preference among major management options. The level of discrimination will be case-specific but, in general, only fairly coarse differences can be discriminated. The preferences determined by optimization of protection tend not to be related to the final choices made for disposal of radioactive wastes. Tools such as multi-attribute analysis are very useful as they provide a convenient means to rationalize the real decisions and give them some air of technical respectability. They do not, however, provide the primary basis for the decisions. Technical experts must develop an awareness of the non-technical approach to decision making an attempt to adjust their method of analyses and their presentation of information to encourage dialogue rather than confrontation. Simple expressions of technical information will be needed and the use of analogues should prove helpful

  9. The cost of being valuable: predictors of extinction risk in marine invertebrates exploited as luxury seafood

    OpenAIRE

    Purcell, Steven W.; Polidoro, Beth A.; Hamel, Jean-François; Gamboa, Ruth U.; Mercier, Annie

    2014-01-01

    Extinction risk has been linked to biological and anthropogenic variables. Prediction of extinction risk in valuable fauna may not follow mainstream drivers when species are exploited for international markets. We use results from an International Union for Conservation of Nature Red List assessment of extinction risk in all 377 known species of sea cucumber within the order Aspidochirotida, many of which are exploited worldwide as luxury seafood for Asian markets. Extinction risk was primari...

  10. ParBiBit: Parallel tool for binary biclustering on modern distributed-memory systems.

    Science.gov (United States)

    González-Domínguez, Jorge; Expósito, Roberto R

    2018-01-01

    Biclustering techniques are gaining attention in the analysis of large-scale datasets as they identify two-dimensional submatrices where both rows and columns are correlated. In this work we present ParBiBit, a parallel tool to accelerate the search of interesting biclusters on binary datasets, which are very popular on different fields such as genetics, marketing or text mining. It is based on the state-of-the-art sequential Java tool BiBit, which has been proved accurate by several studies, especially on scenarios that result on many large biclusters. ParBiBit uses the same methodology as BiBit (grouping the binary information into patterns) and provides the same results. Nevertheless, our tool significantly improves performance thanks to an efficient implementation based on C++11 that includes support for threads and MPI processes in order to exploit the compute capabilities of modern distributed-memory systems, which provide several multicore CPU nodes interconnected through a network. Our performance evaluation with 18 representative input datasets on two different eight-node systems shows that our tool is significantly faster than the original BiBit. Source code in C++ and MPI running on Linux systems as well as a reference manual are available at https://sourceforge.net/projects/parbibit/.

  11. Paying for watershed services: an effective tool in the developing world?

    Energy Technology Data Exchange (ETDEWEB)

    Grieg-Gran, Maryanne; Porras, Ina

    2012-05-15

    Payments for watershed services (PWS) are an increasingly popular conservation and water management tool in developing countries. Some schemes are thriving, and are pro-poor. Others are stalling or have only mixed success. Most rely on public or donor finance; and other sources of funding are unlikely to play a significant role any time soon. In part, financing PWS schemes remains a challenge because the actual evidence for their effectiveness is still scanty — it is hard to prove that they actually work to benefit both livelihoods and environments. Getting more direct and concrete data on costs and benefits will be crucial to securing the long-term future of PWS schemes.

  12. Genovar: a detection and visualization tool for genomic variants.

    Science.gov (United States)

    Jung, Kwang Su; Moon, Sanghoon; Kim, Young Jin; Kim, Bong-Jo; Park, Kiejung

    2012-05-08

    Along with single nucleotide polymorphisms (SNPs), copy number variation (CNV) is considered an important source of genetic variation associated with disease susceptibility. Despite the importance of CNV, the tools currently available for its analysis often produce false positive results due to limitations such as low resolution of array platforms, platform specificity, and the type of CNV. To resolve this problem, spurious signals must be separated from true signals by visual inspection. None of the previously reported CNV analysis tools support this function and the simultaneous visualization of comparative genomic hybridization arrays (aCGH) and sequence alignment. The purpose of the present study was to develop a useful program for the efficient detection and visualization of CNV regions that enables the manual exclusion of erroneous signals. A JAVA-based stand-alone program called Genovar was developed. To ascertain whether a detected CNV region is a novel variant, Genovar compares the detected CNV regions with previously reported CNV regions using the Database of Genomic Variants (DGV, http://projects.tcag.ca/variation) and the Single Nucleotide Polymorphism Database (dbSNP). The current version of Genovar is capable of visualizing genomic data from sources such as the aCGH data file and sequence alignment format files. Genovar is freely accessible and provides a user-friendly graphic user interface (GUI) to facilitate the detection of CNV regions. The program also provides comprehensive information to help in the elimination of spurious signals by visual inspection, making Genovar a valuable tool for reducing false positive CNV results. http://genovar.sourceforge.net/.

  13. Strontium isotopes as an indicator for groundwater salinity sources in the Kirkuk region, Iraq

    Energy Technology Data Exchange (ETDEWEB)

    Sahib, Layth Y. [Institute for Applied Geosciences, Technische Universität Darmstadt, Schnittspahnstraße 9, 64287 Darmstadt (Germany); Geology Department, College of Science, University of Baghdad, Jadreya, Baghdad (Iraq); Marandi, Andres; Schüth, Christoph [Institute for Applied Geosciences, Technische Universität Darmstadt, Schnittspahnstraße 9, 64287 Darmstadt (Germany)

    2016-08-15

    The Kirkuk region in northern Iraq hosts some of the largest oil fields in the Middle East. Several anticline structures enabled vertical migration and entrapment of the oil. Frequently, complex fracture systems and faults cut across the Eocene and middle Oligocene reservoirs and the cap rock, the Fatha Formation of Miocene age. Seepage of crude oil and oil field brines are therefore a common observation in the anticline axes and contamination of shallow groundwater resources is a major concern. In this study, 65 water samples were collected in the Kirkuk region to analyze and distinguish mixing processes between shallow groundwater resources, uprising oil field brines, and dissolution of gypsum and halite from the Fatha Formation. Hydrochemical analyses of the water samples included general hydrochemistry, stable water isotopes, as well as strontium concentrations and for 22 of the samples strontium isotopes ({sup 87}Sr/{sup 86}Sr). Strontium concentrations increased close to the anticline axes with highest concentrations in the oil field brines (300 mg/l). Strontium isotopes proved to be a valuable tool to distinguish mixing processes as isotope signatures of the oil field brines and of waters from the Fatha Formation are significantly different. It could be shown, that mixing of shallow groundwater with oil field brines is occurring close to the major fault zones in the anticlines but high concentrations of strontium in the water samples are mainly due to dissolution from the Fatha Formation. - Highlights: • This field study evaluates the salinity sources in the groundwater in Kirkuk region. • Salinity is related to evaporates dissolving and/or mixing with oil field brine. • Strontium isotopes proved to be a valuable tool to distinguish mixing processes.

  14. The mixed dentition pantomogram: a valuable dental development assessment tool for the dentist.

    Science.gov (United States)

    Hudson, A P G; Harris, A M P; Mohamed, N

    2009-11-01

    The mixed dentition pantomogram is routinely used in paediatric patients. This paper discusses the value of the pantomogram for early identification of problems in dental development during the mixed dentition stage. Aspects regarding dental maturity, leeway space, the sequence of eruption of the permanent teeth, anomalies and the development of the canines will be reviewed.

  15. Imaging of peripheral arteries by 16-slice computed tomography angiography: a valuable tool

    International Nuclear Information System (INIS)

    Mishra, A.; Ehtuish, Ehtuish F.

    2007-01-01

    To evaluate the efficacy of multidetector (16-row) computed tomography (MDCT) in imaging the upper and lower limb arterial tree in trauma and peripheral vascular disease. Thirty three patients underwent multislice computed tomography angiography (MSCTA) of the upper or the lower limb on multislice (16-slice) CT scanner between November 2004 and July 2005 in the Department of Radiology, National Organ Transplant Center, Tripoli, Libya. The findings were retrospectively compared with the surgical outcome in cases of trauma with suspected arterial injuries; or color Doppler correlation was obtained, for patients of peripheral vascular disease. Multislice computed tomography angiography allows a comprehensive diagnostic work-up in all trauma cases with suspected arterial injuries. In 23 cases of peripheral vascular diseases, MSCTA adequately demonstrated the presence of any stenosis or occlusion, its degree and extent, the presence of collaterals and distal reformation if any; the presence of plaques. Our experience of computed tomography angiography with 16-row MDCT scanner has clearly demonstrated its efficacy as a promising, new, fast, accurate, safe and non-invasive imaging modality of choice in cases of trauma with suspected arterial injuries; and as a useful screening modality in cases of peripheral vascular disease for diagnosis and for grading. (author)

  16. How cytogenetical methods help victims prove radiation exposure and claim right for social support: NCERM experience

    International Nuclear Information System (INIS)

    Aleksanin, S.; Slozina, N.; Neronova, E.; Smoliakov, E.

    2011-01-01

    Russian citizens who were irradiated because of radiation disasters, nuclear weapons testing and some other sources have a right to some social support and financial compensation. In order to get this compensation people have to prove that they were irradiated. As it is, not all victims for a variety of reasons have formal documents. Thus they apply for cytogenetic investigation to prove irradiation months, years and even decades after irradiation. Since 1992 the cytogenetic investigations related to radiation exposure were performed in NRCERM for more than 700 people. At the beginning of this investigation FISH method was not certified as a biodosimenty test in Russia. Only dicentric analysis was approved as a proof of irradiation. It is known that the rate of dicentrics decrease in time, but the residual level of cytogenetical markers could be revealed a long time after a radiation accident. Thus the dicentric analysis was performed for the people who applied for biological indication of radiation exposure at that time. Rates of dicentrics exceeding control levels were revealed in half the people who applied for radiation conformation. Now FISH method is certified in Russia and both cytogenetic tests of biodosimetry (dicentrics and FISH) are available for all comers. Increased levels of translocations were found in 8 cases (the dose rate from 0.16 to 0.64 Gy). On the basis of the results of cytogenetic tests official documents were supplied to these people and they were entitled to apply for radiation exposure compensation. Thus cytogenetic tests are very effective and in some cases the only possible way for the victims to prove irradiation exposure and to apply for radiation exposure compensation a long time after an accident.

  17. How cytogenetical methods help victims prove radiation exposure and claim right for social support: NCERM experience

    Energy Technology Data Exchange (ETDEWEB)

    Aleksanin, S., E-mail: Aleksanin@arcerm.spb.ru [Nikiforov Russian Center of Emergency and Radiation Medicine EMERCOM of Russia, (NRCERM) ul. Akademika Lebedeva 4/2, 194044 St. Petersburg (Russian Federation); Slozina, N., E-mail: NataliaSlozina@peterlink.ru [Nikiforov Russian Center of Emergency and Radiation Medicine EMERCOM of Russia, (NRCERM) ul. Akademika Lebedeva 4/2, 194044 St. Petersburg (Russian Federation); Neronova, E.; Smoliakov, E. [Nikiforov Russian Center of Emergency and Radiation Medicine EMERCOM of Russia, (NRCERM) ul. Akademika Lebedeva 4/2, 194044 St. Petersburg (Russian Federation)

    2011-09-15

    Russian citizens who were irradiated because of radiation disasters, nuclear weapons testing and some other sources have a right to some social support and financial compensation. In order to get this compensation people have to prove that they were irradiated. As it is, not all victims for a variety of reasons have formal documents. Thus they apply for cytogenetic investigation to prove irradiation months, years and even decades after irradiation. Since 1992 the cytogenetic investigations related to radiation exposure were performed in NRCERM for more than 700 people. At the beginning of this investigation FISH method was not certified as a biodosimenty test in Russia. Only dicentric analysis was approved as a proof of irradiation. It is known that the rate of dicentrics decrease in time, but the residual level of cytogenetical markers could be revealed a long time after a radiation accident. Thus the dicentric analysis was performed for the people who applied for biological indication of radiation exposure at that time. Rates of dicentrics exceeding control levels were revealed in half the people who applied for radiation conformation. Now FISH method is certified in Russia and both cytogenetic tests of biodosimetry (dicentrics and FISH) are available for all comers. Increased levels of translocations were found in 8 cases (the dose rate from 0.16 to 0.64 Gy). On the basis of the results of cytogenetic tests official documents were supplied to these people and they were entitled to apply for radiation exposure compensation. Thus cytogenetic tests are very effective and in some cases the only possible way for the victims to prove irradiation exposure and to apply for radiation exposure compensation a long time after an accident.

  18. End-member modelling as a tool for climate reconstruction-An Eastern Mediterranean case study.

    Science.gov (United States)

    Beuscher, Sarah; Krüger, Stefan; Ehrmann, Werner; Schmiedl, Gerhard; Milker, Yvonne; Arz, Helge; Schulz, Hartmut

    2017-01-01

    The Eastern Mediterranean Sea is a sink for terrigenous sediments from North Africa, Europe and Asia Minor. Its sediments therefore provide valuable information on the climate dynamics in the source areas and the associated transport processes. We present a high-resolution dataset of sediment core M40/4_SL71, which was collected SW of Crete and spans the last ca. 180 kyr. We analysed the clay mineral composition, the grain size distribution within the silt fraction, and the abundance of major and trace elements. We tested the potential of end-member modelling on these sedimentological datasets as a tool for reconstructing the climate variability in the source regions and the associated detrital input. For each dataset, we modelled three end members. All end members were assigned to a specific provenance and sedimentary process. In total, three end members were related to the Saharan dust input, and five were related to the fluvial sediment input. One end member was strongly associated with the sapropel layers. The Saharan dust end members of the grain size and clay mineral datasets generally suggest enhanced dust export into the Eastern Mediterranean Sea during the dry phases with short-term increases during Heinrich events. During the African Humid Periods, dust export was reduced but may not have completely ceased. The loading patterns of two fluvial end members show a strong relationship with the Northern Hemisphere insolation, and all fluvial end members document enhanced input during the African Humid Periods. The sapropel end member most likely reflects the fixation of redox-sensitive elements within the anoxic sapropel layers. Our results exemplify that end-member modelling is a valuable tool for interpreting extensive and multidisciplinary datasets.

  19. Depleted uranium risk assessment for Jefferson Proving Ground using data from environmental monitoring and site characterization. Final report

    International Nuclear Information System (INIS)

    Ebinger, M.H.; Hansen, W.R.

    1996-10-01

    This report documents the third risk assessment completed for the depleted uranium (DU) munitions testing range at Jefferson Proving Ground (JPG), Indiana, for the U.S. Army Test and Evaluation command. Jefferson Proving Ground was closed in 1995 under the Base Realignment and Closure Act and the testing mission was moved to Yuma Proving Ground. As part of the closure of JPG, assessments of potential adverse health effects to humans and the ecosystem were conducted. This report integrates recent information obtained from site characterization surveys at JPG with environmental monitoring data collected from 1983 through 1994 during DU testing. Three exposure scenarios were evaluated for potential adverse effects to human health: an occasional use scenario and two farming scenarios. Human exposure was minimal from occasional use, but significant risk were predicted from the farming scenarios when contaminated groundwater was used by site occupants. The human health risk assessments do not consider the significant risk posed by accidents with unexploded ordnance. Exposures of white-tailed deer to DU were also estimated in this study, and exposure rates result in no significant increase in either toxicological or radiological risks. The results of this study indicate that remediation of the DU impact area would not substantially reduce already low risks to humans and the ecosystem, and that managed access to JPG is a reasonable model for future land use options

  20. Authentication of primordial characteristics of the CLBL-1 cell line prove the integrity of a canine B-cell lymphoma in a murine in vivo model.

    Science.gov (United States)

    Rütgen, Barbara C; Willenbrock, Saskia; Reimann-Berg, Nicola; Walter, Ingrid; Fuchs-Baumgartinger, Andrea; Wagner, Siegfried; Kovacic, Boris; Essler, Sabine E; Schwendenwein, Ilse; Nolte, Ingo; Saalmüller, Armin; Murua Escobar, Hugo

    2012-01-01

    Cell lines are key tools in cancer research allowing the generation of neoplasias in animal models resembling the initial tumours able to mimic the original neoplasias closely in vivo. Canine lymphoma is the major hematopoietic malignancy in dogs and considered as a valuable spontaneous large animal model for human Non-Hodgkin's Lymphoma (NHL). Herein we describe the establishment and characterisation of an in vivo model using the canine B-cell lymphoma cell line CLBL-1 analysing the stability of the induced tumours and the ability to resemble the original material. CLBL-1 was injected into Rag2(-/-)γ(c) (-/-) mice. The generated tumor material was analysed by immunophenotyping and histopathology and used to establish the cell line CLBL-1M. Both cell lines were karyotyped for detection of chromosomal aberrations. Additionally, CLBL-1 was stimulated with IL-2 and DSP30 as described for primary canine B-cell lymphomas and NHL to examine the stimulatory effect on cell proliferation. CLBL-1 in vivo application resulted in lymphoma-like disease and tumor formation. Immunophenotypic analysis of tumorous material showed expression of CD45(+), MHCII(+), CD11a(+) and CD79αcy(+). PARR analysis showed positivity for IgH indicating a monoclonal character. These cytogenetic, molecular, immunophenotypical and histological characterisations of the in vivo model reveal that the induced tumours and thereof generated cell line resemble closely the original material. After DSP30 and IL-2 stimulation, CLBL-1 showed to respond in the same way as primary material. The herein described CLBL-1 in vivo model provides a highly stable tool for B-cell lymphoma research in veterinary and human medicine allowing various further in vivo studies.

  1. Quebec region's shoreline segmentation in the St. Lawrence River : response tool for oil spills

    International Nuclear Information System (INIS)

    Laforest, S.; Martin, V.

    2004-01-01

    Environment Canada, the Canadian Coast Guard, and the Eastern Canada Response Corporation are developing and refining pre-spill databases containing information about physical shoreline characteristics. Automated links between these pre-spill shoreline characteristic databases and computerized shoreline assessment tools have also been created using Geographical Information System (GIS) technology. The pre-spill databases can be used for planning shoreline cleanup operations. A training exercise, designed to evaluate a spill management system integrating the Quebec region pre-spill shoreline database and the ShoreAssess R shoreline assessment system was performed by Eastern Canada Response Corporation during an aerial survey where shoreline was segmented into digitized information. The cartography of segmentation covers the fluvial part of the St. Lawrence River. The oil spill-oriented database includes geomorphologic information from the supratidal to the lower intertidal zones. It also includes some statistical information and other requirements for cleanup operations. The computerized shoreline assessment tools made it possible to evaluate the length and type of shoreline that would potentially be impacted by oil. The tools also made it possible to assess the shoreline treatment methods most likely to be used, and evaluate the probable duration of the cleanup operation. The training exercise demonstrated that the integration of the databases is a valuable tool during the early phases of an oil spill response. 9 refs., 3 figs

  2. A Quasiphysics Intelligent Model for a Long Range Fast Tool Servo

    Science.gov (United States)

    Liu, Qiang; Zhou, Xiaoqin; Lin, Jieqiong; Xu, Pengzi; Zhu, Zhiwei

    2013-01-01

    Accurately modeling the dynamic behaviors of fast tool servo (FTS) is one of the key issues in the ultraprecision positioning of the cutting tool. Herein, a quasiphysics intelligent model (QPIM) integrating a linear physics model (LPM) and a radial basis function (RBF) based neural model (NM) is developed to accurately describe the dynamic behaviors of a voice coil motor (VCM) actuated long range fast tool servo (LFTS). To identify the parameters of the LPM, a novel Opposition-based Self-adaptive Replacement Differential Evolution (OSaRDE) algorithm is proposed which has been proved to have a faster convergence mechanism without compromising with the quality of solution and outperform than similar evolution algorithms taken for consideration. The modeling errors of the LPM and the QPIM are investigated by experiments. The modeling error of the LPM presents an obvious trend component which is about ±1.15% of the full span range verifying the efficiency of the proposed OSaRDE algorithm for system identification. As for the QPIM, the trend component in the residual error of LPM can be well suppressed, and the error of the QPIM maintains noise level. All the results verify the efficiency and superiority of the proposed modeling and identification approaches. PMID:24163627

  3. Organizational Diagnosis - a Management Tool for Change. Case Study in Satu Mare County Hospital

    Directory of Open Access Journals (Sweden)

    Cătălin BABA

    2009-02-01

    Full Text Available Most human activities are the product ofcoordinated actions performed by individualsworking as a team rather than individuals workingalone. Thus, the processes through which theyaccomplish their tasks, change, decide andrelate to each other inside an organization isessential. This paper is about the importanceof Organizational Diagnosis in management ofchange. Organizational Diagnosis is an essentialstep in every initiative of change, and with everchanging environment in which flexibility andcreativity are proving to be key values, mostmanagers are interested in questions regardingthe nature of organizational process and structure,human relations, and nature of change. The paperpresents such a case of using organizationaldiagnosis as a management tool in a changeprocess inside a health care organization. Usingthis tool has helped the management team identifythe existing gaps between “what is” and “whatshould be” and has increased the chances of asuccessful change process.

  4. Ergonomic study on wrist posture when using laparoscopic tools in four different techniques regarding minimally invasive surgery.

    Science.gov (United States)

    Bartnicka, Joanna; Zietkiewicz, Agnieszka A; Kowalski, Grzegorz J

    2018-03-19

    With reference to four different minimally invasive surgery (MIS) cholecystectomy the aims were: to recognize the factors influencing dominant wrist postures manifested by the surgeon; to detect risk factors involved in maintaining deviated wrist postures; to compare the wrist postures of surgeons while using laparoscopic tools. Video films were recorded during live surgeries. The films were synchronized with wrist joint angles obtained from wireless electrogoniometers placed on the surgeon's hand. The analysis was conducted for five different laparoscopic tools used during all surgical techniques. The most common wrist posture was extension. In the case of one laparoscopic tool, the mean values defining extended wrist posture were distinct in all four surgical techniques. For one type of surgical technique, considered to be the most beneficial for patients, more extreme postures were noticed regarding all laparoscopic tools. We recognized a new factor, apart from the tool's handle design, that influences extreme and deviated wrist postures. It involves three areas of task specification including the type of action, type of motion patterns and motion dynamism. The outcomes proved that the surgical technique which is most beneficial for the patient imposes the greatest strain on the surgeon's wrist.

  5. Breaking Dense Structures: Proving Stability of Densely Structured Hybrid Systems

    Directory of Open Access Journals (Sweden)

    Eike Möhlmann

    2015-06-01

    Full Text Available Abstraction and refinement is widely used in software development. Such techniques are valuable since they allow to handle even more complex systems. One key point is the ability to decompose a large system into subsystems, analyze those subsystems and deduce properties of the larger system. As cyber-physical systems tend to become more and more complex, such techniques become more appealing. In 2009, Oehlerking and Theel presented a (de-composition technique for hybrid systems. This technique is graph-based and constructs a Lyapunov function for hybrid systems having a complex discrete state space. The technique consists of (1 decomposing the underlying graph of the hybrid system into subgraphs, (2 computing multiple local Lyapunov functions for the subgraphs, and finally (3 composing the local Lyapunov functions into a piecewise Lyapunov function. A Lyapunov function can serve multiple purposes, e.g., it certifies stability or termination of a system or allows to construct invariant sets, which in turn may be used to certify safety and security. In this paper, we propose an improvement to the decomposing technique, which relaxes the graph structure before applying the decomposition technique. Our relaxation significantly reduces the connectivity of the graph by exploiting super-dense switching. The relaxation makes the decomposition technique more efficient on one hand and on the other allows to decompose a wider range of graph structures.

  6. Seeing a Colleague Encourage a Student to Make an Assumption while Proving: What Teachers Put in Play when Casting an Episode of Instruction

    Science.gov (United States)

    Nachlieli, Talli; Herbst, Patricio

    2009-01-01

    This article reports on an investigation of how teachers of geometry perceived an episode of instruction presented to them as a case of engaging students in proving. Confirming what was hypothesized, participants found it remarkable that a teacher would allow a student to make an assumption while proving. But they perceived this episode in various…

  7. Seismic test facilities at the ENEA Casaccia Research Center; Prove sismiche con le tavole vibranti al centro ricerche Enea Casaccia

    Energy Technology Data Exchange (ETDEWEB)

    De Canio, G. [ENEA, Divisione Servizi Tecnologici, Centro Ricerche Casaccia, Rome (Italy)

    2000-07-01

    The main experimental facilities for seismic tests at the ENEA C.R. Casaccia laboratories consist of two high performance shake table for three axial seismic tests of structures up to 10 ton mass and 3g acceleration applied at the Center of Gravity at 1m from the base table. The activities are principally devoted to the dynamic characterization and vibration tests for mechanical and aero spatial structures, and the experimental analysis of innovative systems for the seismic isolation and retrofitting of civil, industrial, and historical buildings; together with the seismic tests of sub-structures and scaled mock-ups, in order to evaluate the isolation/dissipation performance of the anti-seismic devices, and the failure modes of the structural parts of the building. [Italian] Le principali attrezzature per le prove sismiche presso i laboratori del C.R. Casaccia consistono di due tavole vibranti triassali per prove su strutture fino a 10t di peso con una accelerazione di 3g applicata al centro di gravita' posto ad 1 m di altezza dal piano della tavola. Le principali attivita' riguardano: (a) test di caratterizzazione dinamica e prove di vibrazioni per strutture meccaniche ed aerospaziali; (b) l'analisi sperimentale di sistemi innovativi per l'isolamento sismico ed il consolidamento di strutture civili, industriali e storico monumentali, e le prove sismiche di elementi strutturali e di modelli in scala per la valutazione della capacita' di dissipazione dei dispositivi antisismici e le modalita' di formazione delle fratture.

  8. Computed tomography of chest trauma

    International Nuclear Information System (INIS)

    Dinkel, E.; Uhl, H.; Reinbold, W.D.; Wimmer, B.; Wenz, W.

    1987-01-01

    Chest CT scans were obtained in 86 patients suffering from serious blunt or penetrating chest trauma. The finding of mediastinal widening was by far the most common CT indication. CT proved to be a more sensitive method for detection of parenchymal lung lesions and occult pneumothorax than bedside radiographs. CT contributed substantially in differentiation of lung abscess and empyema, exclusion of mediastinal pathology and spinal injuries. Aortography is still indicated, even when CT findings are normal, if aortic laceration is clinically suspected. Despite all technical problems combined with CT examinations in the critically ill patient, we consider CT a valuable diagnostic tool for selected problems in the traumatized patient. (orig.) [de

  9. Computed tomography of chest trauma

    Energy Technology Data Exchange (ETDEWEB)

    Dinkel, E.; Uhl, H.; Reinbold, W.D.; Wimmer, B.; Wenz, W.

    1987-09-01

    Chest CT scans were obtained in 86 patients suffering from serious blunt or penetrating chest trauma. The finding of mediastinal widening was by far the most common CT indication. CT proved to be a more sensitive method for detection of parenchymal lung lesions and occult pneumothorax than bedside radiographs. CT contributed substantially in differentiation of lung abscess and empyema, exclusion of mediastinal pathology and spinal injuries. Aortography is still indicated, even when CT findings are normal, if aortic laceration is clinically suspected. Despite all technical problems combined with CT examinations in the critically ill patient, we consider CT a valuable diagnostic tool for selected problems in the traumatized patient.

  10. Updated listing of haplotypes at the human phenylalanine hydroxylase (PAH) locus

    Energy Technology Data Exchange (ETDEWEB)

    Eisensmith, R.C.; Woo, S.L.C. (Baylor College of Medicine, Houston, TX (United States))

    1992-12-01

    Analysis of mutant PAH chromosomes has identified approximately 60 different single-base substitutions and deletions within the PAH locus. Nearly all of these molecular lesions are in strong linkage disequilibrium with specific RFLP haplotypes in different ethnic populations. Thus, haplotype analysis is not only useful for diagnostic purposes but is proving to be a valuable tool in population genetic studies of the origin and spread of phenylketonuria alleles in human populations. PCR-based methods have been developed to detect six of the eight polymorphic restriction sites used for determination of RFLP haplotypes at the PAH locus. A table of the proposed expanded haplotypes is given.

  11. The use of interpractive graphic displays for interpretation of surface design parameters

    Science.gov (United States)

    Talcott, N. A., Jr.

    1981-01-01

    An interactive computer graphics technique known as the Graphic Display Data method has been developed to provide a convenient means for rapidly interpreting large amounts of surface design data. The display technique should prove valuable in such disciplines as aerodynamic analysis, structural analysis, and experimental data analysis. To demonstrate the system's features, an example is presented of the Graphic Data Display method used as an interpretive tool for radiation equilibrium temperature distributions over the surface of an aerodynamic vehicle. Color graphic displays were also examined as a logical extension of the technique to improve its clarity and to allow the presentation of greater detail in a single display.

  12. Effective use of pre-job briefing as tool for the prevention of human error

    International Nuclear Information System (INIS)

    Schlump, Ansgar

    2015-01-01

    There is a fundamental demand to minimise the risks for workers and facilities while executing maintenance work. To ensure that facilities are secure and reliable, any deviation from normal operation behaviour has to be avoided. Accurate planning is the basis for minimising mistakes and making work more secure. All workers involved should understand how the work should be done and what is expected to avoid human errors. Especially in nuclear power plants, the human performance tools (HPT) have proved to be an effective instrument to minimise human errors. These human performance tools consist of numerous different tools that complement each other (e.g. pre-job briefing). The safety culture of the plants is also characterised by these tools. The choice of using the right HP-Tool is often a difficult task for the work planer. On the one hand, he wants to avoid mistakes during the execution of work but on the other hand he does not want to irritate the workers with unnecessary requirements. The proposed concept uses a simple risk analysis to take into account the complexity of the task, the experience of the past and the consequences of failure in to account. One main result of this risk analysis is a recommendation of the detailing of the pre-job briefing, to reduce the risks for the involved staff to a minimum.

  13. Semantic validation of the ISPCAN Child Abuse Screening Tools (ICAST in Brazilian Portuguese

    Directory of Open Access Journals (Sweden)

    Ana Ligia da Silva Silveira

    Full Text Available Abstract Objective: The International Society for the Prevention of Child Abuse and Neglect (ISPCAN Child Abuse Screening Tools (ICAST is a battery of questionnaires created by the World Health Organization, the United Nations and ISPCAN for researching maltreatment in childhood. This study aims to translate, to adapt and to validate the semantic equivalence of all items on the three questionnaires: ICAST-C (ICAST version for Children, ICAST-R (Retrospective Interview and ICAST-P (ICAST version for Parents. Methods: The process of translation and semantic validation comprised five methodological steps: 1 translation; 2 back-translation; 3 correction and semantic adaptation; 4 validation of content by professional experts in the area of abuse in childhood; and 5 a study of their acceptability to a sample of the target population, using a verbal rating scale. Results: In the evaluation of the expert committee, there was need to adapt several words for the Brazilian population while maintaining semantic and conceptual equivalence. In the ICAST-C acceptability study, children exhibited some difficulty understanding 7 of the items (out of 69 questions. For ICAST-P, parents reported a lack of clarity in 5 items (out of 57 questions. These issues were resolved and the Brazilian version of ICAST 3.0 was concluded. Conclusion: The ICAST battery is an internationally recognized tool and the process of translation into Portuguese and semantic adaptation was performed successfully. The final version proved to be easily understandable and semantic validation results were adequate. This battery has proved useful in investigation of childhood maltreatment.

  14. First Approach to a Holistic Tool for Assessing RES Investment Feasibility

    Directory of Open Access Journals (Sweden)

    José María Flores-Arias

    2018-04-01

    Full Text Available Combining availability, viability, sustainability, technical options, and environmental impact in an energy-planning project is a difficult job itself for the today’s engineers. This becomes harder if the potential investors also need to be persuaded. Moreover, the problem increases even more if various consumptions are considered, as their patterns depend to a large extent on the type of facility and the activity. It is therefore essential to develop tools to assess the balance between generation and demand in a given installation. In this paper, a valuable tool is developed for the seamless calculation of the integration possibilities of renewable energies and the assessment of derived technical, financial and environmental impacts. Furthermore, it also considers their interaction with the power grid or other networks, raising awareness of the polluting emissions responsible for global warming. Through a series of Structured Query Language databases and a dynamic data parameterization, the software is provided with sufficient information to encode, calculate, simulate and graphically display information on the generation and demand of electric, thermal and transport energy, all in a user-friendly environment, finally providing an evaluation and feasibility report.

  15. VBMC: a formal verification tool for VHDL program

    International Nuclear Information System (INIS)

    Ajith, K.J.; Bhattacharjee, A.K.

    2014-08-01

    The design of Control and Instrumentation (C and I) systems used in safety critical applications such as nuclear power plants involves partitioning of the overall system functionality into sub-parts and implementing each sub-part in hardware and/or software as appropriate. With increasing use of programmable devices like FPGA, the hardware subsystems are often implemented in Hardware Description Languages (HDL) like VHDL. Since the functional bugs in such hardware subsystems used in safety critical C and I systems have serious consequences, it is important to use rigorous reasoning to verify the functionalities of the HDL models. This report describes the design of a software tool named VBMC (VHDL Bounded Model Checker). The capability of this tool is in proving/refuting functional properties of hardware designs described in VHDL. VBMC accepts design as a VHDL program file, functional property in PSL, and verification bound (number of cycles of operation) as inputs. It either reports that the design satisfies the functional property for the given verification bound or generates a counterexample providing the reason of violation. In case of satisfaction, the proof holds good for the verification bound. VBMC has been used for the functional verification of FPGA based intelligent I/O boards developed at Reactor Control Division, BARC. (author)

  16. Development and verification of a software tool for the acoustic location of partial discharge in a power transformer

    Directory of Open Access Journals (Sweden)

    Polužanski Vladimir

    2014-01-01

    Full Text Available This paper discusses the development and verification of software tool for determining the location of partial discharge in a power transformer with the acoustic method. Classification and systematization of physical principles and detection methods and tests of partial discharge in power transformers are shown at the beginning of this paper. The most important mathematical models, features, algorithms, and real problems that affect measurement accuracy are highlighted. This paper describes the development and implementation of a software tool for determining the location of partial discharge in a power transformer based on a no iterative mathematical algorithm. Verification and accuracy of measurement are proved both by computer simulation and experimental results available in the literature.

  17. EpiTools, A software suite for presurgical brain mapping in epilepsy: Intracerebral EEG.

    Science.gov (United States)

    Medina Villalon, S; Paz, R; Roehri, N; Lagarde, S; Pizzo, F; Colombet, B; Bartolomei, F; Carron, R; Bénar, C-G

    2018-03-29

    In pharmacoresistant epilepsy, exploration with depth electrodes can be needed to precisely define the epileptogenic zone. Accurate location of these electrodes is thus essential for the interpretation of Stereotaxic EEG (SEEG) signals. As SEEG analysis increasingly relies on signal processing, it is crucial to make a link between these results and patient's anatomy. Our aims were thus to develop a suite of software tools, called "EpiTools", able to i) precisely and automatically localize the position of each SEEG contact and ii) display the results of signal analysis in each patient's anatomy. The first tool, GARDEL (GUI for Automatic Registration and Depth Electrode Localization), is able to automatically localize SEEG contacts and to label each contact according to a pre-specified nomenclature (for instance that of FreeSurfer or MarsAtlas). The second tool, 3Dviewer, enables to visualize in the 3D anatomy of the patient the origin of signal processing results such as rate of biomarkers, connectivity graphs or Epileptogenicity Index. GARDEL was validated in 30 patients by clinicians and proved to be highly reliable to determine within the patient's individual anatomy the actual location of contacts. GARDEL is a fully automatic electrode localization tool needing limited user interaction (only for electrode naming or contact correction). The 3Dviewer is able to read signal processing results and to display them in link with patient's anatomy. EpiTools can help speeding up the interpretation of SEEG data and improving its precision. Copyright © 2018 Elsevier B.V. All rights reserved.

  18. Tool path in torus tool CNC machining

    Directory of Open Access Journals (Sweden)

    XU Ying

    2016-10-01

    Full Text Available This paper is about tool path in torus tool CNC machining.The mathematical model of torus tool is established.The tool path planning algorithm is determined through calculation of the cutter location,boundary discretization,calculation of adjacent tool path and so on,according to the conversion formula,the cutter contact point will be converted to the cutter location point and then these points fit a toolpath.Lastly,the path planning algorithm is implemented by using Matlab programming.The cutter location points for torus tool are calculated by Matlab,and then fit these points to a toolpath.While using UG software,another tool path of free surface is simulated of the same data.It is drew compared the two tool paths that using torus tool is more efficient.

  19. Industrial scale chromatographic separation of valuable compounds from biomass hydrolysates and side streams

    Energy Technology Data Exchange (ETDEWEB)

    Saari, P.

    2011-06-15

    Carbohydrates are composed of a number of various monosaccharides, glucose being the most abundant. Some of the monosaccharides are valuable compounds used in the food and pharmaceutical industries. They can be separated from biomass hydrolysates e.g. by chromatographic methods. In this thesis, chromatographic separation of valuable compounds using ion exchange resins was studied on an industrial scale. Of special interest were rare monosaccharides in biomass hydrolysates. A novel chromatographic separation process was developed for fucose, starting from pre-processed spent sulfite liquor. The core of the process consists of three chromatographic separations with different types of ion exchange resins. Chromatographic separation of galactose was tested with three biomass hydrolysates; lactose, gum arabic and hemicellulose hydrolysates. It was demonstrated that also galactose can be separated from complex carbohydrate mixtures. A recovery process for arabinose from citrus pectin liquid residual and for mannose from wood pulp hydrolysate were also developed and experimentally verified. In addition to monosaccharides, chromatographic separation of glycinebetaine from vinasse was examined with a hydrogen form weak acid cation exchange resin. The separation involves untypical peak formation depending, for example, on the pH and the cation composition. The retention mechanism was found to be hydrogen bonding between glycinebetaine and the resin. In the experimental part, all four resin types - strong acid cation, strong base anion, weak acid cation and weak base anion exchange resins - were used. In addition, adsorption equilibria data of seven monosaccharides and sucrose were measured with the resins in sodium and sulfate forms because such data have been lacking. It was found out that the isotherms of all sugars were linear under industrial conditions. A systematic method for conceptual process design and sequencing of chromatographic separation steps were developed

  20. Valuable Nutrients and Functional Bioactives in Different Parts of Olive (Olea europaea L.)—A Review

    Science.gov (United States)

    Ghanbari, Rahele; Anwar, Farooq; Alkharfy, Khalid M.; Gilani, Anwarul-Hassan; Saari, Nazamid

    2012-01-01

    The Olive tree (Olea europaea L.), a native of the Mediterranean basin and parts of Asia, is now widely cultivated in many other parts of the world for production of olive oil and table olives. Olive is a rich source of valuable nutrients and bioactives of medicinal and therapeutic interest. Olive fruit contains appreciable concentration, 1–3% of fresh pulp weight, of hydrophilic (phenolic acids, phenolic alchohols, flavonoids and secoiridoids) and lipophilic (cresols) phenolic compounds that are known to possess multiple biological activities such as antioxidant, anticarcinogenic, antiinflammatory, antimicrobial, antihypertensive, antidyslipidemic, cardiotonic, laxative, and antiplatelet. Other important compounds present in olive fruit are pectin, organic acids, and pigments. Virgin olive oil (VOO), extracted mechanically from the fruit, is also very popular for its nutritive and health-promoting potential, especially against cardiovascular disorders due to the presence of high levels of monounsaturates and other valuable minor components such as phenolics, phytosterols, tocopherols, carotenoids, chlorophyll and squalene. The cultivar, area of production, harvest time, and the processing techniques employed are some of the factors shown to influence the composition of olive fruit and olive oil. This review focuses comprehensively on the nutrients and high-value bioactives profile as well as medicinal and functional aspects of different parts of olives and its byproducts. Various factors affecting the composition of this food commodity of medicinal value are also discussed. PMID:22489153