Developing a visualized cultural knowledge transfer proto-type

DEFF Research Database (Denmark)

Rodil, Kasper; Eskildsen, Søren; Rehm, Matthias

2011-01-01

Youth in Sub-Saharan Africa suffers from a loss of valuable cultural knowledge, which has been a foundation for the coming generations’ survival and cultural self-awareness. By transferring cultural knowledge contexts into 3D visualizations, we prototyped and evaluated a system to bridge the gap...

Space nuclear reactor system diagnosis: Knowledge-based approach

International Nuclear Information System (INIS)

Ting, Y.T.D.

1990-01-01

SP-100 space nuclear reactor system development is a joint effort by the Department of Energy, the Department of Defense and the National Aeronautics and Space Administration. The system is designed to operate in isolation for many years, and is possibly subject to little or no remote maintenance. This dissertation proposes a knowledge based diagnostic system which, in principle, can diagnose the faults which can either cause reactor shutdown or lead to another serious problem. This framework in general can be applied to the fully specified system if detailed design information becomes available. The set of faults considered herein is identified based on heuristic knowledge about the system operation. The suitable approach to diagnostic problem solving is proposed after investigating the most prevalent methodologies in Artificial Intelligence as well as the causal analysis of the system. Deep causal knowledge modeling based on digraph, fault-tree or logic flowgraph methodology would present a need for some knowledge representation to handle the time dependent system behavior. A proposed qualitative temporal knowledge modeling methodology, using rules with specified time delay among the process variables, has been proposed and is used to develop the diagnostic sufficient rule set. The rule set has been modified by using a time zone approach to have a robust system design. The sufficient rule set is transformed to a sufficient and necessary one by searching the whole knowledge base. Qualitative data analysis is proposed in analyzing the measured data if in a real time situation. An expert system shell - Intelligence Compiler is used to develop the prototype system. Frames are used for the process variables. Forward chaining rules are used in monitoring and backward chaining rules are used in diagnosis

Web-Based Honorarium Confirmation System Prototype

Science.gov (United States)

Wisswani, N. W.; Catur Bawa, I. G. N. B.

2018-01-01

Improving services in academic environment can be applied by regulating salary payment process for all employees. As a form of control to maintain financial transparency, employees should have information concerning salary payment process. Currently, notification process of committee honorarium will be accepted by the employees in a manual manner. The salary will be received by the employee bank account and to know its details, they should go to the accounting unit to find out further information. Though there are some employees entering the accounting unit, they still find difficulty to obtain information about detailed honor information that they received in their accounts. This can be caused by many data collected and to be managed. Based on this issue, this research will design a prototype of web-based system for accounting unit system in order to provide detailed financial transaction confirmation to employee bank accounts that have been informed through mobile banking system. This prototype will be developed with Waterfall method through testing on final users after it is developed through PHP program with MySQL as DBMS

Model-based explanation of plant knowledge

Energy Technology Data Exchange (ETDEWEB)

Huuskonen, P.J. [VTT Electronics, Oulu (Finland). Embedded Software

1997-12-31

This thesis deals with computer explanation of knowledge related to design and operation of industrial plants. The needs for explanation are motivated through case studies and literature reviews. A general framework for analysing plant explanations is presented. Prototypes demonstrate key mechanisms for implementing parts of the framework. Power plants, steel mills, paper factories, and high energy physics control systems are studied to set requirements for explanation. The main problems are seen to be either lack or abundance of information. Design knowledge in particular is found missing at plants. Support systems and automation should be enhanced with ways to explain plant knowledge to the plant staff. A framework is formulated for analysing explanations of plant knowledge. It consists of three parts: 1. a typology of explanation, organised by the class of knowledge (factual, functional, or strategic) and by the target of explanation (processes, automation, or support systems), 2. an identification of explanation tasks generic for the plant domain, and 3. an identification of essential model types for explanation (structural, behavioural, functional, and teleological). The tasks use the models to create the explanations of the given classes. Key mechanisms are discussed to implement the generic explanation tasks. Knowledge representations based on objects and their relations form a vocabulary to model and present plant knowledge. A particular class of models, means-end models, are used to explain plant knowledge. Explanations are generated through searches in the models. Hypertext is adopted to communicate explanations over dialogue based on context. The results are demonstrated in prototypes. The VICE prototype explains the reasoning of an expert system for diagnosis of rotating machines at power plants. The Justifier prototype explains design knowledge obtained from an object-oriented plant design tool. Enhanced access mechanisms into on-line documentation are

Model-based explanation of plant knowledge

Energy Technology Data Exchange (ETDEWEB)

Huuskonen, P J [VTT Electronics, Oulu (Finland). Embedded Software

1998-12-31

This thesis deals with computer explanation of knowledge related to design and operation of industrial plants. The needs for explanation are motivated through case studies and literature reviews. A general framework for analysing plant explanations is presented. Prototypes demonstrate key mechanisms for implementing parts of the framework. Power plants, steel mills, paper factories, and high energy physics control systems are studied to set requirements for explanation. The main problems are seen to be either lack or abundance of information. Design knowledge in particular is found missing at plants. Support systems and automation should be enhanced with ways to explain plant knowledge to the plant staff. A framework is formulated for analysing explanations of plant knowledge. It consists of three parts: 1. a typology of explanation, organised by the class of knowledge (factual, functional, or strategic) and by the target of explanation (processes, automation, or support systems), 2. an identification of explanation tasks generic for the plant domain, and 3. an identification of essential model types for explanation (structural, behavioural, functional, and teleological). The tasks use the models to create the explanations of the given classes. Key mechanisms are discussed to implement the generic explanation tasks. Knowledge representations based on objects and their relations form a vocabulary to model and present plant knowledge. A particular class of models, means-end models, are used to explain plant knowledge. Explanations are generated through searches in the models. Hypertext is adopted to communicate explanations over dialogue based on context. The results are demonstrated in prototypes. The VICE prototype explains the reasoning of an expert system for diagnosis of rotating machines at power plants. The Justifier prototype explains design knowledge obtained from an object-oriented plant design tool. Enhanced access mechanisms into on-line documentation are

An expert system prototype for aiding in the development of software functional requirements for NASA Goddard's command management system: A case study and lessons learned

Science.gov (United States)

Liebowitz, Jay

1986-01-01

At NASA Goddard, the role of the command management system (CMS) is to transform general requests for spacecraft opeerations into detailed operational plans to be uplinked to the spacecraft. The CMS is part of the NASA Data System which entails the downlink of science and engineering data from NASA near-earth satellites to the user, and the uplink of command and control data to the spacecraft. Presently, it takes one to three years, with meetings once or twice a week, to determine functional requirements for CMS software design. As an alternative approach to the present technique of developing CMS software functional requirements, an expert system prototype was developed to aid in this function. Specifically, the knowledge base was formulated through interactions with domain experts, and was then linked to an existing expert system application generator called 'Knowledge Engineering System (Version 1.3).' Knowledge base development focused on four major steps: (1) develop the problem-oriented attribute hierachy; (2) determine the knowledge management approach; (3) encode the knowledge base; and (4) validate, test, certify, and evaluate the knowledge base and the expert system prototype as a whole. Backcasting was accomplished for validating and testing the expert system prototype. Knowledge refinement, evaluation, and implementation procedures of the expert system prototype were then transacted.

Knowledge-based and integrated monitoring and diagnosis in autonomous power systems

Science.gov (United States)

Momoh, J. A.; Zhang, Z. Z.

1990-01-01

A new technique of knowledge-based and integrated monitoring and diagnosis (KBIMD) to deal with abnormalities and incipient or potential failures in autonomous power systems is presented. The KBIMD conception is discussed as a new function of autonomous power system automation. Available diagnostic modelling, system structure, principles and strategies are suggested. In order to verify the feasibility of the KBIMD, a preliminary prototype expert system is designed to simulate the KBIMD function in a main electric network of the autonomous power system.

Delivering spacecraft control centers with embedded knowledge-based systems: The methodology issue

Science.gov (United States)

Ayache, S.; Haziza, M.; Cayrac, D.

1994-01-01

Matra Marconi Space (MMS) occupies a leading place in Europe in the domain of satellite and space data processing systems. The maturity of the knowledge-based systems (KBS) technology, the theoretical and practical experience acquired in the development of prototype, pre-operational and operational applications, make it possible today to consider the wide operational deployment of KBS's in space applications. In this perspective, MMS has to prepare the introduction of the new methods and support tools that will form the basis of the development of such systems. This paper introduces elements of the MMS methodology initiatives in the domain and the main rationale that motivated the approach. These initiatives develop along two main axes: knowledge engineering methods and tools, and a hybrid method approach for coexisting knowledge-based and conventional developments.

Application of Goal Tree-Success Tree model as the knowledge-base of operator advisory systems

International Nuclear Information System (INIS)

Kim, I.S.; Modarres, M.

1987-01-01

The most important portion of an expert system development is the articulation of knowledge by the expert and its satisfactory formulation in a suitable knowledge representation scheme for mechanization by a computer. A 'deep knowledge' approach called Goal Tree-Success Tree model is devised to represent complex dynamic domain knowledge. This approach can hierarchically model the underlying principles of a given process domain (for example nuclear power plant operations domain). The Goal Tree-Success Tree can then be used to represent the knowledge-base and provide means of selecting an efficient search routine in the inference engine of an expert system. A prototype expert system has been developed to demonstrate the method. This expert system models the operation of a typical system used in the pressurized water reactors. The expert system is modeled for real-time operations if an interface between plant parameters and the expert system is established. The real-time operation provides an ability to quickly remedy minor disturbances that can quickly lead to a system malfunction or trip. A description of both the Goal Tree-Success Tree model and the prototype expert system is presented. (orig.)

PERANCANGAN PROTOTYPE APLIKASI KNOWLEDGE MANAGEMENT PADA DIVISI MANAGEMENT AUTOMATION INFORMATION UNTUK MENDUKUNG ORACLE FINANCIAL PADA ORANG TUA GROUP

Directory of Open Access Journals (Sweden)

Gema Gema

2010-10-01

Full Text Available The purpose of this project is to design a knowledge management application as a media to document knowledge and facility that supported a knowledge sharing culture in Oracle Financial subdivision in Orang Tua Group. The researcher uses 7 first steps method which defined by Tiwana in doing knowledge management application prototype. The knowledge management prototype application modules consist of Wiki page, document library, discussion board, blog, picture library, knowledge base, help desk, frequently asked questions, and surveys. In using knowledge in knowledge base, user will get knowledge through business process, how to use the application, or how to finish some cases. Knowledge management prototype application design as a whole could fulfill user’s needs in sharing knowledge, but still needs continuous improvement for maximal usage.Keywords: prototype design, knowledge management application, knowledge

A prototype case-based reasoning human assistant for space crew assessment and mission management

Science.gov (United States)

Owen, Robert B.; Holland, Albert W.; Wood, Joanna

1993-01-01

We present a prototype human assistant system for space crew assessment and mission management. Our system is based on case episodes from American and Russian space missions and analog environments such as polar stations and undersea habitats. The general domain of small groups in isolated and confined environments represents a near ideal application area for case-based reasoning (CBR) - there are few reliable rules to follow, and most domain knowledge is in the form of cases. We define the problem domain and outline a unique knowledge representation system driven by conflict and communication triggers. The prototype system is able to represent, index, and retrieve case studies of human performance. We index by social, behavioral, and environmental factors. We present the problem domain, our current implementation, our research approach for an operational system, and prototype performance and results.

Compiling knowledge-based systems from KEE to Ada

Science.gov (United States)

Filman, Robert E.; Bock, Conrad; Feldman, Roy

1990-01-01

The dominant technology for developing AI applications is to work in a multi-mechanism, integrated, knowledge-based system (KBS) development environment. Unfortunately, systems developed in such environments are inappropriate for delivering many applications - most importantly, they carry the baggage of the entire Lisp environment and are not written in conventional languages. One resolution of this problem would be to compile applications from complex environments to conventional languages. Here the first efforts to develop a system for compiling KBS developed in KEE to Ada (trademark). This system is called KATYDID, for KEE/Ada Translation Yields Development Into Delivery. KATYDID includes early prototypes of a run-time KEE core (object-structure) library module for Ada, and translation mechanisms for knowledge structures, rules, and Lisp code to Ada. Using these tools, part of a simple expert system was compiled (not quite automatically) to run in a purely Ada environment. This experience has given us various insights on Ada as an artificial intelligence programming language, potential solutions of some of the engineering difficulties encountered in early work, and inspiration on future system development.

An approach to build a knowledge base for reactor diagnostic system using statistical method

International Nuclear Information System (INIS)

Yokobayashi, Masao; Matsumoto, Kiyoshi; Kohsaka, Atsuo

1988-01-01

In the development of a rule-based expert system, one of the key issues is how to acquire knowledge and to build a knowledge base. When the knowledge base of DISKET was built, which is an expert system for nuclear reactor accident diagnosis developed in Japan Atomic Energy Research Institute, several problems have been experienced. To write rules is a time-consuming task, and it was difficult to keep the objectivity and consistency of rules as the number of rules increased. Certainty factors must be determined often according to engineering judgement, i.e. empirically or intuitively. A systematic approach was attempted to cope with these difficulties and to build efficiently an objective knowledge base. The approach described in this paper is based on the concept that a prototype knowledge base, colloquially speaking an initial guess, should first be generated in a systematic way, then it is modified or improved by human experts for practical use. Factor analysis was used as the systematic way. DISKET system, the procedure of building a knowledge base, and the verification of the approach are reported. (Kako, I.)

Knowledge-based support system for requirement elaboration in design

International Nuclear Information System (INIS)

Furuta, Kazuo; Kondo, Shunsuke

1994-01-01

Design requirements are the seeds of every design activity, but elicitation and formalization of them are not easy tasks. This paper proposes a method to support designers in such requirement elaboration process with a computer. In this method the cognitive work space of designers is modeled by abstraction and structural hierarchies, and supporting functions of knowledge-based requirement elaboration, requirement classification and assessment of contentment status of requirements are provided on this framework. A prototype system was developed and tested using fast breeder reactor design. (author)

The fault monitoring and diagnosis knowledge-based system for space power systems: AMPERES, phase 1

Science.gov (United States)

Lee, S. C.

1989-01-01

The objective is to develop a real time fault monitoring and diagnosis knowledge-based system (KBS) for space power systems which can save costly operational manpower and can achieve more reliable space power system operation. The proposed KBS was developed using the Autonomously Managed Power System (AMPS) test facility currently installed at NASA Marshall Space Flight Center (MSFC), but the basic approach taken for this project could be applicable for other space power systems. The proposed KBS is entitled Autonomously Managed Power-System Extendible Real-time Expert System (AMPERES). In Phase 1 the emphasis was put on the design of the overall KBS, the identification of the basic research required, the initial performance of the research, and the development of a prototype KBS. In Phase 2, emphasis is put on the completion of the research initiated in Phase 1, and the enhancement of the prototype KBS developed in Phase 1. This enhancement is intended to achieve a working real time KBS incorporated with the NASA space power system test facilities. Three major research areas were identified and progress was made in each area. These areas are real time data acquisition and its supporting data structure; sensor value validations; development of inference scheme for effective fault monitoring and diagnosis, and its supporting knowledge representation scheme.

Fuzzy prototype classifier based on items and its application in recommender system

Directory of Open Access Journals (Sweden)

Mei Cai

2017-01-01

Full Text Available Currently, recommender systems (RS are incorporating implicit information from social circle of the Internet. The implicit social information in human mind is not easy to reflect in appropriate decision making techniques. This paper consists of 2 contributions. First, we develop an item-based prototype classifier (IPC in which a prototype represents a social circlers preferences as a pattern classification technique. We assume the social circle which distinguishes with others by the items their members like. The prototype structure of the classifier is defined by two2-dimensional matrices. We use information gain and OWA aggregator to construct a feature space. The item-based classifier assigns a new item to some prototypes with different prototypicalities. We reform a typical data setmIris data set in UCI Machine Learning Repository to verify our fuzzy prototype classifier. The second proposition of this paper is to give the application of IPC in recommender system to solve new item cold-start problems. We modify the dataset of MovieLens to perform experimental demonstrations of the proposed ideas.

Querying Natural Logic Knowledge Bases

DEFF Research Database (Denmark)

Andreasen, Troels; Bulskov, Henrik; Jensen, Per Anker

2017-01-01

This paper describes the principles of a system applying natural logic as a knowledge base language. Natural logics are regimented fragments of natural language employing high level inference rules. We advocate the use of natural logic for knowledge bases dealing with querying of classes...... in ontologies and class-relationships such as are common in life-science descriptions. The paper adopts a version of natural logic with recursive restrictive clauses such as relative clauses and adnominal prepositional phrases. It includes passive as well as active voice sentences. We outline a prototype...... for partial translation of natural language into natural logic, featuring further querying and conceptual path finding in natural logic knowledge bases....

Prototype of smart office system using based security system

Science.gov (United States)

Prasetyo, T. F.; Zaliluddin, D.; Iqbal, M.

2018-05-01

Creating a new technology in the modern era gives a positive impact on business and industry. Internet of Things (IoT) as a new communication technology is very useful in realizing smart systems such as: smart home, smart office, smart parking and smart city. This study presents a prototype of the smart office system which was designed as a security system based on IoT. Smart office system development method used waterfall model. IoT-based smart office system used platform (project builder) cayenne so that. The data can be accessed and controlled through internet network from long distance. Smart office system used arduino mega 2560 microcontroller as a controller component. In this study, Smart office system is able to detect threats of dangerous objects made from metals, earthquakes, fires, intruders or theft and perform security monitoring outside the building by using raspberry pi cameras on autonomous robots in real time to the security guard.

An approach to build a knowledge base for reactor accident diagnostic expert system

International Nuclear Information System (INIS)

Yoshida, K.; Fujii, M.; Fujiki, K.; Yokobayashi, M.; Kohsaka, A.; Aoyagi, T.; Hirota, Y.

1987-01-01

In the development of a rule based expert system, one of the key issues is how to acquire knowledge and to build knowledge base (KB). On building the KB of DISKET, which is an expert system for nuclear reactor accident diagnosis developed in JAERI, several problems have been experienced as follows. To write rules is a time consuming task, and it is difficult to keep the objectivity and consistency of rules as the number of rules increase. Further, certainty factors (CFs) must be often determined according to engineering judgment, i.e., empirically or intuitively. A systematic approach was attempted to handle these difficulties and to build an objective KB efficiently. The approach described in this paper is based on the concept that a prototype KB, colloquially speaking an initial guess, should first be generated in a systematic way and then is to be modified and/or improved by human experts for practical use. Statistical methods, principally Factor Analysis, were used as the systematic way to build a prototype KB for the DISKET using a PWR plant simulator data. The source information is a number of data obtained from the simulation of transients, such as the status of components and annunciator etc., and major process parameters like pressures, temperatures and so on

Validation Of Critical Knowledge-Based Systems

Science.gov (United States)

Duke, Eugene L.

1992-01-01

Report discusses approach to verification and validation of knowledge-based systems. Also known as "expert systems". Concerned mainly with development of methodologies for verification of knowledge-based systems critical to flight-research systems; e.g., fault-tolerant control systems for advanced aircraft. Subject matter also has relevance to knowledge-based systems controlling medical life-support equipment or commuter railroad systems.

ITER Fast Plant System Controller prototype based on PXIe platform

International Nuclear Information System (INIS)

Ruiz, M.; Vega, J.; Castro, R.; Sanz, D.; López, J.M.; Arcas, G. de; Barrera, E.; Nieto, J.; Gonçalves, B.; Sousa, J.; Carvalho, B.; Utzel, N.; Makijarvi, P.

2012-01-01

Highlights: ► Implementation of Fast Plant System Controller (FPSC) for ITER CODAC. ► Efficient data acquisition and data movement using EPICS. ► Performance of PCIe technologies in the implementation of FPSC. - Abstract: The ITER Fast Plant System Controller (FPSC) is based on embedded technologies. The FPSC will be devoted to both data acquisition tasks (sampling rates higher than 1 kHz) and control purposes (feedback loop actuators). Some of the essential requirements of these systems are: (a) data acquisition and data preprocessing; (b) interfacing with different networks and high speed links (Plant Operation Network, timing network based on IEEE1588, synchronous data transference and streaming/archiving networks); and (c) system setup and operation using EPICS (Experimental Physics and Industrial Control System) process variables. CIEMAT and UPM have implemented a prototype of FPSC using a PXIe (PCI eXtension for Instrumentation) form factor in a R and D project developed in two phases. The paper presents the main features of the two prototypes developed that have been named alpha and beta. The former was implemented using LabVIEW development tools as it was focused on modeling the FPSC software modules, using the graphical features of LabVIEW applications, and measuring the basic performance in the system. The alpha version prototype implements data acquisition with time-stamping, EPICS monitoring using waveform process variables (PVs), and archiving. The beta version prototype is a complete IOC implemented using EPICS with different software functional blocks. These functional blocks are integrated and managed using an ASYN driver solution and provide the basic functionalities required by ITER FPSC such as data acquisition, data archiving, data pre-processing (using both CPU and GPU) and streaming.

Enroute flight-path planning - Cooperative performance of flight crews and knowledge-based systems

Science.gov (United States)

Smith, Philip J.; Mccoy, Elaine; Layton, Chuck; Galdes, Deb

1989-01-01

Interface design issues associated with the introduction of knowledge-based systems into the cockpit are discussed. Such issues include not only questions about display and control design, they also include deeper system design issues such as questions about the alternative roles and responsibilities of the flight crew and the computer system. In addition, the feasibility of using enroute flight path planning as a context for exploring such research questions is considered. In particular, the development of a prototyping shell that allows rapid design and study of alternative interfaces and system designs is discussed.

Knowledge representation and knowledge base design for operator advisor system

International Nuclear Information System (INIS)

Hangos, K.M.; Sziano, T.; Tapolcai, L.

1990-01-01

The problems of knowledge representation, knowledge base handling and design has been described for an Operator Advisor System in the Paks Nuclear Power Plant. The Operator Advisor System is to be implemented as a part of the 5th and 6th unit. The knowledge of the Operator Advisor system is described by a few elementary knowledge items (diagnostic event functions, fault graph, action trees), weighted directed graphs have been found as their common structure. List-type and relational representation of these graphs have been used for the on-line and off-line part of the knowledge base respectively. A uniform data base design and handling has been proposed which consists of a design system, a knowledge base editor and a knowledge base compiler

Knowledge-based automated radiopharmaceutical manufacturing for Positron Emission Tomography

International Nuclear Information System (INIS)

Alexoff, D.L.

1991-01-01

This article describes the application of basic knowledge engineering principles to the design of automated synthesis equipment for radiopharmaceuticals used in Positron Emission Tomography (PET). Before discussing knowledge programming, an overview of the development of automated radiopharmaceutical synthesis systems for PET will be presented. Since knowledge systems will rely on information obtained from machine transducers, a discussion of the uses of sensory feedback in today's automated systems follows. Next, the operation of these automated systems is contrasted to radiotracer production carried out by chemists, and the rationale for and basic concepts of knowledge-based programming are explained. Finally, a prototype knowledge-based system supporting automated radiopharmaceutical manufacturing of 18FDG at Brookhaven National Laboratory (BNL) is described using 1stClass, a commercially available PC-based expert system shell

Prototype explosives detection system based on nuclear resonance absorption in nitrogen

International Nuclear Information System (INIS)

Morgado, R.E.; Arnone, G.J.; Cappiello, C.C.

1996-01-01

A laboratory prototype system has been developed for the experimental evaluation of an explosives detection technique based on nuclear resonance absorption of gamma rays in nitrogen. Major subsystems include a radiofrequency quadrupole proton accelerator and associated beam transport system, a high-power gamma-ray production target, an airline-luggage tomographic inspection system, and an image- processing/detection-alarm subsystem. The detection system performance, based on a limited experimental test, is reported

Knowledge acquisition and rapid protyping of an expert system: Dealing with real world problems

Science.gov (United States)

Bailey, Patrick A.; Doehr, Brett B.

1988-01-01

The knowledge engineering and rapid prototyping phases of an expert system that does fault handling for a Solid Amine, Water Desorbed CO2 removal assembly for the Environmental Control and Life Support System for space based platforms are addressed. The knowledge acquisition phase for this project was interesting because it could not follow the textbook examples. As a result of this, a variety of methods were used during the knowledge acquisition task. The use of rapid prototyping and the need for a flexible prototype suggested certain types of knowledge representation. By combining various techniques, a representative subset of faults and a method for handling those faults was achieved. The experiences should prove useful for developing future fault handling expert systems under similar constraints.

Prototype of evaluation guidance system in Integrated Nuclear Data Evaluation System

International Nuclear Information System (INIS)

Fukahori, T.; Nakagawa, T.

1992-01-01

Integrated Nuclear Data Evaluation System (INDES) is being developed to keep experiences of nuclear data evaluation for JENDL-3 and to support new evaluations. One of the INDES functions is to set up input data of theoretical calculation codes automatically. In order to use INDES effectively, a prototype of nuclear data evaluation guidance system (E.T.; Evaluation Tutor) was made to help users in selecting a set of suitable theoretical calculation codes by applying knowledge engineering technology. E.T. consists of an inference engine, frames, a rule-base, two example-bases and calculating modules of certainty factors. The inference engine and the calculating modules are written in FORTRAN77. (author)

Knowledge base to develop expert system prototype for predicting groundwater pollution from nitrogen fertilizer

International Nuclear Information System (INIS)

Ta-oun, M.; Daud, M.; Bardaie, M.Z.; Jusop, S.

1999-01-01

An expert system for prediction the impact of nitrogen fertilizer on groundwater pollution potential was established by using CLIPS (NASA's Jonson Space Centre). The knowledge base could be extracted from FAO reports, ministry of agriculture and rural development Malaysia report, established literature and domain expert for preparing an expert system skeleton. An expert system was used to correlate the availability of nitrogen fertilizer with the vulnerability of groundwater to pollution in Peninsula Malaysia and to identify potential groundwater quality problems. An n-fertilizer groundwater pollution potential index produced b using the vulnerability of groundwater to pollution yields a more accurate screening toll for identifying potential pollution problems than by considering vulnerability alone. An expert system can predict the groundwater pollution potential under several conditions of agricultural activities and existing environments. (authors)

Knowledge base technology for CT-DIMS: Report 1. [CT-DIMS (Cutting Tool - Database and Information Management System)

Energy Technology Data Exchange (ETDEWEB)

Kelley, E.E.

1993-05-01

This report discusses progress on the Cutting Tool-Database and Information Management System (CT-DIMS) project being conducted by the University of Illinois Urbana-Champaign (UIUC) under contract to the Department of Energy. This project was initiated in October 1991 by UIUC. The Knowledge-Based Engineering Systems Research Laboratory (KBESRL) at UIUC is developing knowledge base technology and prototype software for the presentation and manipulation of the cutting tool databases at Allied-Signal Inc., Kansas City Division (KCD). The graphical tool selection capability being developed for CT-DIMS in the Intelligent Design Environment for Engineering Automation (IDEEA) will provide a concurrent environment for simultaneous access to tool databases, tool standard libraries, and cutting tool knowledge.

Prototyping and farm system modelling - Partners on the road towards more sustainable farm systems?

NARCIS (Netherlands)

Sterk, B.; Ittersum, van M.K.; Leeuwis, C.; Wijnands, F.G.

2007-01-01

Farm system modelling and prototyping are two research methods proposed to enhance the process of developing sustainable farm systems. Farm system models provide means to formalize, expand and refine expert knowledge and to integrate this with scientific agro-ecological knowledge at the farm level.

CIMIDx: Prototype for a Cloud-Based System to Support Intelligent Medical Image Diagnosis With Efficiency.

Science.gov (United States)

Bhavani, Selvaraj Rani; Senthilkumar, Jagatheesan; Chilambuchelvan, Arul Gnanaprakasam; Manjula, Dhanabalachandran; Krishnamoorthy, Ramasamy; Kannan, Arputharaj

2015-03-27

The Internet has greatly enhanced health care, helping patients stay up-to-date on medical issues and general knowledge. Many cancer patients use the Internet for cancer diagnosis and related information. Recently, cloud computing has emerged as a new way of delivering health services but currently, there is no generic and fully automated cloud-based self-management intervention for breast cancer patients, as practical guidelines are lacking. We investigated the prevalence and predictors of cloud use for medical diagnosis among women with breast cancer to gain insight into meaningful usage parameters to evaluate the use of generic, fully automated cloud-based self-intervention, by assessing how breast cancer survivors use a generic self-management model. The goal of this study was implemented and evaluated with a new prototype called "CIMIDx", based on representative association rules that support the diagnosis of medical images (mammograms). The proposed Cloud-Based System Support Intelligent Medical Image Diagnosis (CIMIDx) prototype includes two modules. The first is the design and development of the CIMIDx training and test cloud services. Deployed in the cloud, the prototype can be used for diagnosis and screening mammography by assessing the cancers detected, tumor sizes, histology, and stage of classification accuracy. To analyze the prototype's classification accuracy, we conducted an experiment with data provided by clients. Second, by monitoring cloud server requests, the CIMIDx usage statistics were recorded for the cloud-based self-intervention groups. We conducted an evaluation of the CIMIDx cloud service usage, in which browsing functionalities were evaluated from the end-user's perspective. We performed several experiments to validate the CIMIDx prototype for breast health issues. The first set of experiments evaluated the diagnostic performance of the CIMIDx framework. We collected medical information from 150 breast cancer survivors from hospitals

Current trends on knowledge-based systems

CERN Document Server

Valencia-García, Rafael

2017-01-01

This book presents innovative and high-quality research on the implementation of conceptual frameworks, strategies, techniques, methodologies, informatics platforms and models for developing advanced knowledge-based systems and their application in different fields, including Agriculture, Education, Automotive, Electrical Industry, Business Services, Food Manufacturing, Energy Services, Medicine and others. Knowledge-based technologies employ artificial intelligence methods to heuristically address problems that cannot be solved by means of formal techniques. These technologies draw on standard and novel approaches from various disciplines within Computer Science, including Knowledge Engineering, Natural Language Processing, Decision Support Systems, Artificial Intelligence, Databases, Software Engineering, etc. As a combination of different fields of Artificial Intelligence, the area of Knowledge-Based Systems applies knowledge representation, case-based reasoning, neural networks, Semantic Web and TICs used...

Knowledge-based requirements analysis for automating software development

Science.gov (United States)

Markosian, Lawrence Z.

1988-01-01

We present a new software development paradigm that automates the derivation of implementations from requirements. In this paradigm, informally-stated requirements are expressed in a domain-specific requirements specification language. This language is machine-understable and requirements expressed in it are captured in a knowledge base. Once the requirements are captured, more detailed specifications and eventually implementations are derived by the system using transformational synthesis. A key characteristic of the process is that the required human intervention is in the form of providing problem- and domain-specific engineering knowledge, not in writing detailed implementations. We describe a prototype system that applies the paradigm in the realm of communication engineering: the prototype automatically generates implementations of buffers following analysis of the requirements on each buffer.

A COMPUTERIZED OPERATOR SUPPORT SYSTEM PROTOTYPE

Energy Technology Data Exchange (ETDEWEB)

Thomas A. Ulrich; Roger Lew; Ronald L. Boring; Ken Thomas

2015-03-01

A computerized operator support system (COSS) is proposed for use in nuclear power plants to assist control room operators in addressing time-critical plant upsets. A COSS is a collection of technologies to assist operators in monitoring overall plant performance and making timely, informed decisions on appropriate control actions for the projected plant condition. A prototype COSS was developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based on four underlying elements consisting of a digital alarm system, computer-based procedures, piping and instrumentation diagram system representations, and a recommender module for mitigation actions. The initial version of the prototype is now operational at the Idaho National Laboratory using the Human System Simulation Laboratory.

KNOWLEDGE AND XML BASED CAPP SYSTEM

Institute of Scientific and Technical Information of China (English)

ZHANG Shijie; SONG Laigang

2006-01-01

In order to enhance the intelligent level of system and improve the interactivity with other systems, a knowledge and XML based computer aided process planning (CAPP) system is implemented. It includes user management, bill of materials(BOM) management, knowledge based process planning, knowledge management and database maintaining sub-systems. This kind of nesting knowledge representation method the system provided can represent complicated arithmetic and logical relationship to deal with process planning tasks. With the representation and manipulation of XML based technological file, the system solves some important problems in web environment such as information interactive efficiency and refreshing of web page. The CAPP system is written in ASP VBScript, JavaScript, Visual C++ languages and Oracle database. At present, the CAPP system is running in Shenyang Machine Tools. The functions of it meet the requirements of enterprise production.

From conventional software based systems to knowledge based systems

International Nuclear Information System (INIS)

Bologna, S.

1995-01-01

Even if todays nuclear power plants have a very good safety record, there is a continuous search for still improving safety. One direction of this effort address operational safety, trying to improve the handling of disturbances and accidents partly by further automation, partly by creating a better control room environment, providing the operator with intelligent support systems to help in the decision making process. Introduction of intelligent computerised operator support systems has proved to be an efficient way of improving the operators performance. A number of systems have been developed worldwide, assisting in tasks like process fault detection and diagnosis, selection and implementation of proper remedial actions. Unfortunately, the use of Knowledge Based Systems (KBSs), introduces a new dimension to the problem of the licensing process. KBSs, despite the different technology employed, are still nothing more than a computer program. Unfortunately, quite a few people building knowledge based systems seem to ignore the many good programming practices that have evolved over the years for producing traditional computer programs. In this paper the author will try to point out similarities and differences between conventional software based systems, and knowledge based systems, introducing also the concept of model based reasoning. (orig.) (25 refs., 2 figs.)

Evaluation of Computer-Based Procedure System Prototype

Energy Technology Data Exchange (ETDEWEB)

Johanna Oxstrand; Katya Le Blanc; Seth Hays

2012-09-01

relevant for the task and situation at hand, which has potential consequences of taking up valuable time when operators must be responding to the situation, and potentially leading operators down an incorrect response path. Other challenges related to PBPs are the management of multiple procedures, place-keeping, finding the correct procedure for the task at hand, and relying on other sources of additional information to ensure a functional and accurate understanding of the current plant status (Converse, 1995; Fink, Killian, Hanes, & Naser, 2009; Le Blanc & Oxstrand, 2012). The main focus of this report is to describe the research activities conducted to address the remaining two objectives; Develop a prototype CBP system based on requirements identified and Evaluate the CBP prototype. The emphasis will be on the evaluation of an initial CBP prototype in at a Nuclear Power Plant.

Development of a Prototype Web-Based Decision Support System for Watershed Management

Directory of Open Access Journals (Sweden)

Dejian Zhang

2015-02-01

Full Text Available Using distributed hydrological models to evaluate the effectiveness of reducing non-point source pollution by applying best management practices (BMPs is an important support to decision making for watershed management. However, complex interfaces and time-consuming simulations of the models have largely hindered the applications of these models. We designed and developed a prototype web-based decision support system for watershed management (DSS-WMRJ, which is user friendly and supports quasi-real-time decision making. DSS-WMRJ is based on integrating an open-source Web-based Geographical Information Systems (Web GIS tool (Geoserver, a modeling component (SWAT, Soil and Water Assessment Tool, a cloud computing platform (Hadoop and other open source components and libraries. In addition, a private cloud is used in an innovative manner to parallelize model simulations, which are time consuming and computationally costly. Then, the prototype DSS-WMRJ was tested with a case study. Successful implementation and testing of the prototype DSS-WMRJ lay a good foundation to develop DSS-WMRJ into a fully-fledged tool for watershed management. DSS-WMRJ can be easily customized for use in other watersheds and is valuable for constructing other environmental decision support systems, because of its performance, flexibility, scalability and economy.

Prototyping real-time systems

OpenAIRE

Clynch, Gary

1994-01-01

The traditional software development paradigm, the waterfall life cycle model, is defective when used for developing real-time systems. This thesis puts forward an executable prototyping approach for the development of real-time systems. A prototyping system is proposed which uses ESML (Extended Systems Modelling Language) as a prototype specification language. The prototyping system advocates the translation of non-executable ESML specifications into executable LOOPN (Language of Object ...

Knowledge-based diagnosis for aerospace systems

Science.gov (United States)

Atkinson, David J.

1988-01-01

The need for automated diagnosis in aerospace systems and the approach of using knowledge-based systems are examined. Research issues in knowledge-based diagnosis which are important for aerospace applications are treated along with a review of recent relevant research developments in Artificial Intelligence. The design and operation of some existing knowledge-based diagnosis systems are described. The systems described and compared include the LES expert system for liquid oxygen loading at NASA Kennedy Space Center, the FAITH diagnosis system developed at the Jet Propulsion Laboratory, the PES procedural expert system developed at SRI International, the CSRL approach developed at Ohio State University, the StarPlan system developed by Ford Aerospace, the IDM integrated diagnostic model, and the DRAPhys diagnostic system developed at NASA Langley Research Center.

Evaluation of a prototype infrasound system

International Nuclear Information System (INIS)

Whitaker, R.; Sandoval, T.; Breding, D.; Kromer, D.

1997-01-01

Under Department of Energy sponsorship, Sandia National Laboratories and Los Alamos National Laboratory cooperated to develop a prototype infrasonic array, with associated documentation, that could be used as part of the International Monitoring System. The United States Government or foreign countries could procure commercially available systems based on this prototype to fulfill their Comprehensive Test Ban Treaty (CTBT) obligations. The prototype is a four-element array in a triangular layout as recommended in CD/NTB/WP.224 with an element at each corner and one in the center. The prototype test configuration utilize an array spacing of 1 km. The prototype infrasound system has the following objectives: (1) Provide a prototype that reliably acquires and transmits near real-time infrasonic data to facilitate the rapid location and identification of atmospheric events. (2) Provide documentation that could be used by the United States and foreign countries to procure infrasound systems commercially to fulfill their CTBT responsibilities. Infrasonic monitoring is an effective, low cost technology for detecting atmospheric explosions. The low frequency components of explosion signals propagate to long ranges (few thousand kilometers) where they can be detected with an array of sensors. Los Alamos National Laboratory's expertise in infrasound systems and phenomenology when combined with Sandia's expertise in providing verification quality system for treaty monitoring make an excellent team to provide the prototype infrasound sensor system. By September 1997, the prototype infrasound system will have been procured, integrated, evaluated and documented. Final documentation will include a system requirements document, an evaluation report and a hardware design document. The hardware design document will describe the various hardware components used in the infrasound prototype and their interrelationships

Use of knowledge based systems for rational reliability analysis based inspection and maintenance planning for offshore structures

International Nuclear Information System (INIS)

Tang, M.X.; Dharmavasan, S.; Peers, S.M.C.

1994-01-01

The structural integrity of fixed offshore platforms is ensured by periodic inspections. In the past, decisions made as to when, where and how to inspect have been made by engineers using rules-of-thumb and general planning heuristics. It is now hoped that more rational inspection and maintenance scheduling may be carried out by applying recently developed techniques based on structural reliability methods. However, one of the problems associated with a theoretical approach is that it is not always possible to incorporate all the constraints that are present in a practical situation. These constraints modify the decisions made for analysis data input and the interpretation of the analysis results. Knowledge based systems provide a mean of encapsulating several different forms of information and knowledge within a computer system and hence can overcome this problem. In this paper, a prototype system being developed for integrating reliability based analysis with other constraints for inspection scheduling will be described. In addition, the scheduling model and the algorithms to carry out the scheduling will be explained. Furthermore, implementation details are also given

Knowledge Based Product Configuration - a documentatio tool for configuration projects

DEFF Research Database (Denmark)

Hvam, Lars; Malis, Martin

2003-01-01

. A lot of knowledge isput into these systems and many domain experts are involved. This calls for an effective documentation system in order to structure this knowledge in a way that fits to the systems. Standard configuration systems do not support this kind of documentation. The chapter deals...... with the development of a Lotus Notes application that serves as a knowledge based documentation tool for configuration projects. A prototype has been developed and tested empirically in an industrial case-company. It has proved to be a succes....

An American knowledge base in England - Alternate implementations of an expert system flight status monitor

Science.gov (United States)

Butler, G. F.; Graves, A. T.; Disbrow, J. D.; Duke, E. L.

1989-01-01

A joint activity between the Dryden Flight Research Facility of the NASA Ames Research Center (Ames-Dryden) and the Royal Aerospace Establishment (RAE) on knowledge-based systems has been agreed. Under the agreement, a flight status monitor knowledge base developed at Ames-Dryden has been implemented using the real-time AI (artificial intelligence) toolkit MUSE, which was developed in the UK. Here, the background to the cooperation is described and the details of the flight status monitor and a prototype MUSE implementation are presented. It is noted that the capabilities of the expert-system flight status monitor to monitor data downlinked from the flight test aircraft and to generate information on the state and health of the system for the test engineers provides increased safety during flight testing of new systems. Furthermore, the expert-system flight status monitor provides the systems engineers with ready access to the large amount of information required to describe a complex aircraft system.

Knowledge-based computer systems for radiotherapy planning.

Science.gov (United States)

Kalet, I J; Paluszynski, W

1990-08-01

Radiation therapy is one of the first areas of clinical medicine to utilize computers in support of routine clinical decision making. The role of the computer has evolved from simple dose calculations to elaborate interactive graphic three-dimensional simulations. These simulations can combine external irradiation from megavoltage photons, electrons, and particle beams with interstitial and intracavitary sources. With the flexibility and power of modern radiotherapy equipment and the ability of computer programs that simulate anything the machinery can do, we now face a challenge to utilize this capability to design more effective radiation treatments. How can we manage the increased complexity of sophisticated treatment planning? A promising approach will be to use artificial intelligence techniques to systematize our present knowledge about design of treatment plans, and to provide a framework for developing new treatment strategies. Far from replacing the physician, physicist, or dosimetrist, artificial intelligence-based software tools can assist the treatment planning team in producing more powerful and effective treatment plans. Research in progress using knowledge-based (AI) programming in treatment planning already has indicated the usefulness of such concepts as rule-based reasoning, hierarchical organization of knowledge, and reasoning from prototypes. Problems to be solved include how to handle continuously varying parameters and how to evaluate plans in order to direct improvements.

A relational data-knowledge base system and its potential in developing a distributed data-knowledge system

Science.gov (United States)

Rahimian, Eric N.; Graves, Sara J.

1988-01-01

A new approach used in constructing a rational data knowledge base system is described. The relational database is well suited for distribution due to its property of allowing data fragmentation and fragmentation transparency. An example is formulated of a simple relational data knowledge base which may be generalized for use in developing a relational distributed data knowledge base system. The efficiency and ease of application of such a data knowledge base management system is briefly discussed. Also discussed are the potentials of the developed model for sharing the data knowledge base as well as the possible areas of difficulty in implementing the relational data knowledge base management system.

Development of an expert system prototype for determining software functional requirements for command management activities at NASA Goddard

Science.gov (United States)

Liebowitz, J.

1986-01-01

The development of an expert system prototype for software functional requirement determination for NASA Goddard's Command Management System, as part of its process of transforming general requests into specific near-earth satellite commands, is described. The present knowledge base was formulated through interactions with domain experts, and was then linked to the existing Knowledge Engineering Systems (KES) expert system application generator. Steps in the knowledge-base development include problem-oriented attribute hierarchy development, knowledge management approach determination, and knowledge base encoding. The KES Parser and Inspector, in addition to backcasting and analogical mapping, were used to validate the expert system-derived requirements for one of the major functions of a spacecraft, the solar Maximum Mission. Knowledge refinement, evaluation, and implementation procedures of the expert system were then accomplished.

A Prototype Knowledge-Based System for Satellite Mission Planning.

Science.gov (United States)

1986-12-01

used by different groups in an operational environment. 6 II. Literature Review As management science has recognized, it is not practical to separate...schedule only one satellite per set of requirements. A -4 .............. er.- Appendix B O9perational Conce~t Usin a Knowlede -Based System There are many

Process fault diagnosis using knowledge-based systems

International Nuclear Information System (INIS)

Sudduth, A.L.

1991-01-01

Advancing technology in process plants has led to increased need for computer based process diagnostic systems to assist the operator. One approach to this problem is to use an embedded knowledge based system to interpret measurement signals. Knowledge based systems using only symptom based rules are inadequate for real time diagnosis of dynamic systems; therefore a model based approach is necessary. Though several forms of model based reasoning have been proposed, the use of qualitative causal models incorporating first principles knowledge of process behavior structure, and function appear to have the most promise as a robust modeling methodology. In this paper the structure of a diagnostic system is described which uses model based reasoning and conventional numerical methods to perform process diagnosis. This system is being applied to emergency diesel generator system in nuclear stations

A Prototype SSVEP Based Real Time BCI Gaming System.

Science.gov (United States)

Martišius, Ignas; Damaševičius, Robertas

2016-01-01

Although brain-computer interface technology is mainly designed with disabled people in mind, it can also be beneficial to healthy subjects, for example, in gaming or virtual reality systems. In this paper we discuss the typical architecture, paradigms, requirements, and limitations of electroencephalogram-based gaming systems. We have developed a prototype three-class brain-computer interface system, based on the steady state visually evoked potentials paradigm and the Emotiv EPOC headset. An online target shooting game, implemented in the OpenViBE environment, has been used for user feedback. The system utilizes wave atom transform for feature extraction, achieving an average accuracy of 78.2% using linear discriminant analysis classifier, 79.3% using support vector machine classifier with a linear kernel, and 80.5% using a support vector machine classifier with a radial basis function kernel.

A Prototype SSVEP Based Real Time BCI Gaming System

Directory of Open Access Journals (Sweden)

Ignas Martišius

2016-01-01

Full Text Available Although brain-computer interface technology is mainly designed with disabled people in mind, it can also be beneficial to healthy subjects, for example, in gaming or virtual reality systems. In this paper we discuss the typical architecture, paradigms, requirements, and limitations of electroencephalogram-based gaming systems. We have developed a prototype three-class brain-computer interface system, based on the steady state visually evoked potentials paradigm and the Emotiv EPOC headset. An online target shooting game, implemented in the OpenViBE environment, has been used for user feedback. The system utilizes wave atom transform for feature extraction, achieving an average accuracy of 78.2% using linear discriminant analysis classifier, 79.3% using support vector machine classifier with a linear kernel, and 80.5% using a support vector machine classifier with a radial basis function kernel.

Prototype learning and dissociable categorization systems in Alzheimer's disease.

Science.gov (United States)

Heindel, William C; Festa, Elena K; Ott, Brian R; Landy, Kelly M; Salmon, David P

2013-08-01

Recent neuroimaging studies suggest that prototype learning may be mediated by at least two dissociable memory systems depending on the mode of acquisition, with A/Not-A prototype learning dependent upon a perceptual representation system located within posterior visual cortex and A/B prototype learning dependent upon a declarative memory system associated with medial temporal and frontal regions. The degree to which patients with Alzheimer's disease (AD) can acquire new categorical information may therefore critically depend upon the mode of acquisition. The present study examined A/Not-A and A/B prototype learning in AD patients using procedures that allowed direct comparison of learning across tasks. Despite impaired explicit recall of category features in all tasks, patients showed differential patterns of category acquisition across tasks. First, AD patients demonstrated impaired prototype induction along with intact exemplar classification under incidental A/Not-A conditions, suggesting that the loss of functional connectivity within visual cortical areas disrupted the integration processes supporting prototype induction within the perceptual representation system. Second, AD patients demonstrated intact prototype induction but impaired exemplar classification during A/B learning under observational conditions, suggesting that this form of prototype learning is dependent on a declarative memory system that is disrupted in AD. Third, the surprisingly intact classification of both prototypes and exemplars during A/B learning under trial-and-error feedback conditions suggests that AD patients shifted control from their deficient declarative memory system to a feedback-dependent procedural memory system when training conditions allowed. Taken together, these findings serve to not only increase our understanding of category learning in AD, but to also provide new insights into the ways in which different memory systems interact to support the acquisition of

Rule-based emergency action level monitor prototype

International Nuclear Information System (INIS)

Touchton, R.A.; Gunter, A.D.; Cain, D.

1985-01-01

In late 1983, the Electric Power Research Institute (EPRI) began a program to encourage and stimulate the development of artificial intelligence (AI) applications for the nuclear industry. Development of a rule-based emergency action level classification system prototype is discussed. The paper describes both the full prototype currently under development and the completed, simplified prototype

Advanced software development workstation. Knowledge base design: Design of knowledge base for flight planning application

Science.gov (United States)

Izygon, Michel E.

1992-01-01

The development process of the knowledge base for the generation of Test Libraries for Mission Operations Computer (MOC) Command Support focused on a series of information gathering interviews. These knowledge capture sessions are supporting the development of a prototype for evaluating the capabilities of INTUIT on such an application. the prototype includes functions related to POCC (Payload Operation Control Center) processing. It prompts the end-users for input through a series of panels and then generates the Meds associated with the initialization and the update of hazardous command tables for a POCC Processing TLIB.

An FPGA-based rapid prototyping platform for wavelet coprocessors

Science.gov (United States)

Vera, Alonzo; Meyer-Baese, Uwe; Pattichis, Marios

2007-04-01

MatLab/Simulink-based design flows are being used by DSP designers to improve time-to-market of FPGA implementations. 1 Commonly, digital signal processing cores are integrated in an embedded system as coprocessors. Existing CAD tools do not fully address the integration of a DSP coprocessor into an embedded system design. This integration might prove to be time consuming and error prone. It also requires that the DSP designer has an excellent knowledge of embedded systems and computer architecture details. We present a prototyping platform and design flow that allows rapid integration of embedded systems with a wavelet coprocessor. The platform comprises of software and hardware modules that allow a DSP designer a painless integration of a coprocessor with a PowerPC-based embedded system. The platform has a wide range of applications, from industrial to educational environments.

End user interface and knowledge base editing system of CSPAR: a knowledge-based consultation system for preventive maintenance in nuclear plants

International Nuclear Information System (INIS)

Sinohara, Yasusi; Terano, Takao; Nishiyama, Takuya

1988-01-01

Consultation System for Prevention of Abnormal-event Recurrence (CSPAR) is a knowledge-based system to analyze the same kind of events to a given fault reported on a nuclear power plant and to give users some informations for effective measures preventing them. This report discusses the interfaces of CSPAR for both end-users and knowledge-base editors. The interfaces are highly interactive and multi-window oriented. The features are as follows: (1) The end-user interfaces has Japanese language processing facility, which enables the users to consult CSPAR with various synonims and related terms for knowledge-base handling; (2) The knowledge-base editing system is used by knowledge-base editors for maintaining the knowledge on both plants' equipments and abnormal events sequences. It has facilities for easy maintenance of knowledge-bases, which includes a graphic oriented browser, a knowledge-base retriever, and a knowledge-base checker. (author)

Precursor systems analyses of automated highway systems. Knowledge based systems and learning methods for AHS. Volume 10. Final report, September 1993-February 1995

Energy Technology Data Exchange (ETDEWEB)

Schmoltz, J.; Blumer, A.; Noonan, J.; Shedd, D.; Twarog, J.

1995-06-01

Managing each AHS vehicle and the AHS system as a whole is an extremely complex yndertaking. The authors have investigated and now report on Artificial Intelligence (AI) approaches that can help. In particular, we focus on AI technologies known as Knowledge Based Systems (KBSs) and Learning Methods (LMs). Our primary purpose is to identify opportunities: we identify several problems in AHS and AI technologies that can solve them. Our secondary purpose is to examine in some detail a subset of these opportunities: we examine how KBSs and LMs can help in controlling the high level movements--e.g., keep in lane, change lanes, speed up, slow down--of an automated vehicle. This detailed examination includes the implementation of a prototype system having three primary components. The Tufts Automated Highway System Kit(TAHSK) discrete time micro-level traffic simulator is a generic AHS simulator. TAHSK interfaces with the Knowledge Based Controller (KBCon) knowledge based high level controller, which controls the high level actions of individual AHS vehicles. Finally, TAHSK also interfaces with a Reinforcement learning (RL) module that was used to explore the possibilities of RL techniques in an AHS environment.

Knowledge model of trainee for training support system of plant operation

Energy Technology Data Exchange (ETDEWEB)

Furuhama, Yutaka; Furuta, Kazuo; Kondo, Shunsuke [Tokyo Univ. (Japan). Faculty of Engineering

1996-10-01

We have already proposed a knowledge model of a trainee, which model consists of two layers: hierarchical function and qualitative structure. We developed a method to generate normative operator knowledge based on this knowledge model structure, and to identify trainee`s intention by means of truth maintenance. The methods were tested by cognitive experiment using a prototype of training support system. (author)

A prototype system for perinatal knowledge engineering using an artificial intelligence tool.

Science.gov (United States)

Sokol, R J; Chik, L

1988-01-01

Though several perinatal expert systems are extant, the use of artificial intelligence has, as yet, had minimal impact in medical computing. In this evaluation of the potential of AI techniques in the development of a computer based "Perinatal Consultant," a "top down" approach to the development of a perinatal knowledge base was taken, using as a source for such a knowledge base a 30-page manuscript of a chapter concerning high risk pregnancy. The UNIX utility "style" was used to parse sentences and obtain key words and phrases, both as part of a natural language interface and to identify key perinatal concepts. Compared with the "gold standard" of sentences containing key facts as chosen by the experts, a semiautomated method using a nonmedical speller to identify key words and phrases in context functioned with a sensitivity of 79%, i.e., approximately 8 in 10 key sentences were detected as the basis for PROLOG, rules and facts for the knowledge base. These encouraging results suggest that functional perinatal expert systems may well be expedited by using programming utilities in conjunction with AI tools and published literature.

Technical requirements on knowledge base and instrumentation system for decision making in plant operation and maintenance

International Nuclear Information System (INIS)

Kitamura, Masaharu; Yoshikawa, Shinji; Hasegawa, Makoto

1998-03-01

A series of technical surveys and studies are described in this report to examine and identify technical requirements to be posed on knowledge base and instrumentation system as the fundamental in high reliability computational decision making in operation and maintenance of nuclear power plants. Monitoring and diagnosis are focused as the important tasks among the operation/maintenance-related tasks. A concrete monitoring and diagnosis system configuration has been proposed consisting of distributed symptom database and of on-demand measurement subsystem. An prototype of the proposed system configuration has been successfully verified. (author)

The development of a prototype level-three interoperable catalog system

Science.gov (United States)

Hood, Carroll A.; Howie, Randy; Verhanovitz, Rich

1993-08-01

The development of a level-three interoperable catalog system is defined by a new paradigm for metadata access. The old paradigm is characterized by a hierarchy of metadata layers, the transfer of control to target systems, and the requirement for the user to be familiar with the syntax and data dictionaries of several catalog system elements. Attributes of the new paradigm are exactly orthogonal: the directory and inventories are peer entities, there is a single user interface, and the system manages the complexity of interacting transparently with remote elements. We have designed and implemented a prototype level-three interoperable catalog system based on the new paradigm. Through a single intelligent interface, users can interoperably access a master directory, inventories for selected satellite datasets, and an in situ meteorological dataset inventory. This paper describes the development of the prototype system and three of the formidable challenges that were addressed in the process. The first involved the interoperable integration of satellite and in situ inventories, which to our knowledge, has never been operationally demonstrated. The second was the development of a search strategy for orbital and suborbital granules which preserves the capability to identify temporally or spatially coincident subsets between them. The third involved establishing a method of incorporating inventory-specific search criteria into user queries. We are working closely with selected science data users to obtain feedback on the system's design and performance. The lessons learned from this prototype will help direct future development efforts. Distributed data systems of the 1990s such as EOSDIS and the Global Change Data and Information System (GCDIS) will be able to build on this prototype.

Cell-Phone Tower Power System Prototype Testing for Verizon Wireless |

Science.gov (United States)

Advanced Manufacturing Research | NREL Cell-Phone Tower Power System Prototype Testing for Verizon Wireless Cell-Phone Tower Power System Prototype Testing for Verizon Wireless For Verizon Wireless , NREL tested a new cell-phone tower power system prototype based on DC interconnection and photovoltaics

Results from a data acquisition system prototype project using a switch-based event builder

Energy Technology Data Exchange (ETDEWEB)

Black, D.; Andresen, J.; Barsotti, E.; Baumbaugh, A.; Esterline, D.; Knickerbocker, K.; Kwarciany, R.; Moore, G.; Patrick, J.; Swoboda, C.; Treptow, K.; Trevizo, O.; Urish, J.; VanConant, R.; Walsh, D. (Fermi National Accelerator Lab., Batavia, IL (United States)); Bowden, M.; Booth, A. (Superconducting Super Collider Lab., Dallas, TX (United States)); Cancelo, G. (La Plata Univ. Nacional (Argentina))

1991-11-01

A prototype of a high bandwidth parallel event builder has been designed and tested. The architecture is based on a simple switching network and is adaptable to a wide variety of data acquisition systems. An eight channel system with a peak throughput of 160 Megabytes per second has been implemented. It is modularly expandable to 64 channels (over one Gigabyte per second). The prototype uses a number of relatively recent commercial technologies, including very high speed fiber-optic data links, high integration crossbar switches and embedded RISC processors. It is based on an open architecture which permits the installation of new technologies with little redesign effort. 5 refs., 6 figs.

Results from a data acquisition system prototype project using a switch-based event builder

International Nuclear Information System (INIS)

Black, D.; Andresen, J.; Barsotti, E.; Baumbaugh, A.; Esterline, D.; Knickerbocker, K.; Kwarciany, R.; Moore, G.; Patrick, J.; Swoboda, C.; Treptow, K.; Trevizo, O.; Urish, J.; VanConant, R.; Walsh, D.; Bowden, M.; Booth, A.; Cancelo, G.

1991-11-01

A prototype of a high bandwidth parallel event builder has been designed and tested. The architecture is based on a simple switching network and is adaptable to a wide variety of data acquisition systems. An eight channel system with a peak throughput of 160 Megabytes per second has been implemented. It is modularly expandable to 64 channels (over one Gigabyte per second). The prototype uses a number of relatively recent commercial technologies, including very high speed fiber-optic data links, high integration crossbar switches and embedded RISC processors. It is based on an open architecture which permits the installation of new technologies with little redesign effort. 5 refs., 6 figs

Knowledge Based Help desk System in Nuclear Malaysia

International Nuclear Information System (INIS)

Mohamad Safuan Sulaiman; Abdul Muin Abdul Rahman; Norzalina Nasirudin; Khairiel Adyani Abdul Ghani; Abdul Aziz Mhd Ramli; Mohd Ashhar Khalid

2012-01-01

Knowledge based (K-based) Help desk system is a knowledge oriented web based system that provides support to business process of the technical service providers. It is a multi-centric system which focuses on end-users, technical workers and higher level management through utilization of knowledge which resides and grows within the system. The objectives of the system are to be a user-friendly, capture technical knowledge for efficient performance and educating users for self reliance. These were achieved through the improvement of the help desk business process and better management of technical knowledge. This system has been tested and implemented in Information Technology Center (IT), Engineering Division (BKJ) and Instrumentation and Automation Center (IAC) at the Malaysian Nuclear Agency (Nuclear Malaysia). Higher levels of user satisfaction and faster growth in technical knowledge repository have been recorded in the system. This paper describes the help desk system in the perspective of management of its technical knowledge contributing to strengthening organizational knowledge asset of Nuclear Malaysia as national nuclear research institution. (Author)

Practice of knowledge management in Prototype and Plant Development Center (PDC)

International Nuclear Information System (INIS)

Mohamad Safuan Sulaiman; Rapieh Aminuddin; Rosli Darmawan; Mohd Ashhar Khalid

2007-01-01

As reflecting the evolvement and movement of world economy direction, Malaysia move one step a head towards knowledge based economy (K-Economy). The movement indirectly changes the Malaysian Nuclear Agency (Nuclear Malaysia) environment to contribute to the K-Economy in the field of science and technology. Therefore, the practice of knowledge management is slowly introduced to the Nuclear Malaysia community to support the K-Economy. This paper describes the detail of the practice of knowledge management at macro and micro level in an organization. The Prototype and Plant Development Center(PDC) under the Technical Support Division, Technical Service Program has been chosen to be the case study in implementing the practice of knowledge management in Nuclear Malaysia. The main objective of this paper is to introduce the right practice of Knowledge management in an organization and PDC as among the first case for this purpose. (Author)

A demonstration of expert systems applications in transportation engineering : volume II, TRANZ, a prototype expert system for traffic control in highway work zones.

Science.gov (United States)

1988-01-01

The development of a prototype knowledge-based expert system (KBES) for selecting appropriate traffic control strategies and management techniques around highway work zones was initiated. This process was encompassed by the steps that formulate the p...

Design of Smart Home Systems Prototype Using MyRIO

Science.gov (United States)

Ratna Wati, Dwi Ann; Abadianto, Dika

2017-06-01

This paper presents the design of smart home systems prototype. It applies. MyRIO 1900 embedded device as the main controller of the smart home systems. The systems include wireless monitoring systems and email based notifications as well as data logging. The prototype systems use simulated sensor such as temperature sensor, push button as proximity sensor, and keypad while its simulated actuators are buzzer as alarm system, LED as light and LCD. Based on the test and analysis, the smart home systems prototype as well as the wireless monitoring systems have real time responses when input signals are available. Tbe performance of MyRIO controller is excellent and it results in a stable system.

Prototype Learning and Dissociable Categorization Systems in Alzheimer’s Disease

Science.gov (United States)

Heindel, William C.; Festa, Elena K.; Ott, Brian R.; Landy, Kelly M.; Salmon, David P.

2015-01-01

Recent neuroimaging studies suggest that prototype learning may be mediated by at least two dissociable memory systems depending on the mode of acquisition, with A/Not-A prototype learning dependent upon a perceptual representation system located within posterior visual cortex and A/B prototype learning dependent upon a declarative memory system associated with medial temporal and frontal regions. The degree to which patients with Alzheimer’s disease (AD) can acquire new categorical information may therefore critically depend upon the mode of acquisition. The present study examined A/Not-A and A/B prototype learning in AD patients using procedures that allowed direct comparison of learning across tasks. Despite impaired explicit recall of category features in all tasks, patients showed differential patterns of category acquisition across tasks. First, AD patients demonstrated impaired prototype induction along with intact exemplar classification under incidental A/Not-A conditions, suggesting that the loss of functional connectivity within visual cortical areas disrupted the integration processes supporting prototype induction within the perceptual representation system. Second, AD patients demonstrated intact prototype induction but impaired exemplar classification during A/B learning under observational conditions, suggesting that this form of prototype learning is dependent on a declarative memory system that is disrupted in AD. Third, the surprisingly intact classification of both prototypes and exemplars during A/B learning under trial-and-error feedback conditions suggests that AD patients shifted control from their deficient declarative memory system to a feedback-dependent procedural memory system when training conditions allowed. Taken together, these findings serve to not only increase our understanding of category learning in AD, but to also provide new insights into the ways in which different memory systems interact to support the acquisition of

EUCLID ARCHIVE SYSTEM PROTOTYPE

NARCIS (Netherlands)

Belikov, Andrey; Williams, Owen; Droge, Bob; Tsyganov, Andrey; Boxhoorn, Danny; McFarland, John; Verdoes Kleijn, Gijs; Valentijn, E; Altieri, Bruno; Dabin, Christophe; Pasian, F.; Osuna, Pedro; Soille, P.; Marchetti, P.G.

2014-01-01

The Euclid Archive System prototype is a functional information system which is used to address the numerous challenges in the development of fully functional data processing system for Euclid. The prototype must support the highly distributed nature of the Euclid Science Ground System, with Science

The "Digital Friend": A knowledge-based decision support system for space crews

Science.gov (United States)

Hoermann, Hans-Juergen; Johannes, Bernd; Petrovich Salnitski, Vyacheslav

Space travel of far distances presents exceptional strain on the medical and psychological well-being of the astronauts who undertake such missions. An intelligent knowledge management system has been developed, to assist space crews on long-duration missions as an autonomous decision support system, called the "Digital Friend". This system will become available upon request for the purpose of coaching group processes and individual performance levels as well as aiding in tactical decision processes by taking crew condition parameters into account. In its initial stage, the "Digital Friend" utilizes interconnected layers of knowledge, which encompass relevant models of operational, situational, individual psycho-physiological as well as group processes. An example is the human life science model that contains historic, diagnostic, and prognostic knowledge about the habitual, actual, and anticipated patterns of physiological, cognitive, and group psychology parameters of the crew members. Depending on the available data derived from pre-mission screening, regular check-ups, or non-intrusive onboard monitoring, the "Digital Friend" can generate a situational analysis and diagnose potential problems. When coping with the effects of foreseeable and unforeseen stressors encountered during the mission, the system can provide feedback and support the crew with a recommended course of actions. The first prototype of the "Digital Friend" employs the Neurolab/Healthlab platform developed in a cooperation of DLR and IBMP. The prototype contains psycho-physiological sensors with multiple Heally Satellites that relay data to the intelligent Heally Masters and a telemetric Host station. The analysis of data from a long-term simulation study illustrates how the system can be used to estimate the operators' current level of skill reliability based on Salnitski's model [V. Salnitski, A. Bobrov, A. Dudukin, B. Johannes, Reanalysis of operators reliability in professional skills

FPGA-based prototype storage system with phase change memory

Science.gov (United States)

Li, Gezi; Chen, Xiaogang; Chen, Bomy; Li, Shunfen; Zhou, Mi; Han, Wenbing; Song, Zhitang

2016-10-01

With the ever-increasing amount of data being stored via social media, mobile telephony base stations, and network devices etc. the database systems face severe bandwidth bottlenecks when moving vast amounts of data from storage to the processing nodes. At the same time, Storage Class Memory (SCM) technologies such as Phase Change Memory (PCM) with unique features like fast read access, high density, non-volatility, byte-addressability, positive response to increasing temperature, superior scalability, and zero standby leakage have changed the landscape of modern computing and storage systems. In such a scenario, we present a storage system called FLEET which can off-load partial or whole SQL queries to the storage engine from CPU. FLEET uses an FPGA rather than conventional CPUs to implement the off-load engine due to its highly parallel nature. We have implemented an initial prototype of FLEET with PCM-based storage. The results demonstrate that significant performance and CPU utilization gains can be achieved by pushing selected query processing components inside in PCM-based storage.

A smartphone-based prototype system for incident/work zone management driven by crowd-sourced data.

Science.gov (United States)

2015-02-01

This project develops a smartphone-based prototype system that supplements the 511 system to improve its dynamic traffic : routing service to state highway users under non-recurrent congestion. This system will save considerable time to provide cruci...

Development of maintenance knowledge management system for power plant

International Nuclear Information System (INIS)

Ohi, Tadashi; Hirai, Kenji

2004-01-01

This paper describes the knowledge management framework to systematize maintenance knowledge in power plant. The features of the framework are (1) to construct a decision tree of trouble cases incrementally based on Ripple Down Rules (RDR) method and (2) to decide the timing of installing new knowledge based on several metrics obtained by evaluating a structure of a decision tree. We are developing the experimental prototype of maintenance knowledge management system. The system is integrated with plant database (ex. the operation journals and maintenance records). The management of trouble cases is based on the format of XML. For practical purpose, each trouble case is linked with related data (ex. maintenance manuals, equipment configuration, records). Plant workers can easily search for maintenance knowledge and relevant data by specifying observed status. On the other hand, knowledge engineers can monitor occurrence counts of exceptional cases to each node. The metrics calculation gives a cue to locate the effective node for improving the efficiency of retrieval. We are evaluating the functionality and the effectiveness of the system through the application to maintenance work of controller systems. We believe that this framework will be helpful to share common knowledge among plant sites as well as to manage site-specific knowledge. (author)

Prototyping Tool for Web-Based Multiuser Online Role-Playing Game

Science.gov (United States)

Okamoto, Shusuke; Kamada, Masaru; Yonekura, Tatsuhiro

This letter proposes a prototyping tool for Web-based Multiuser Online Role-Playing Game (MORPG). The design goal is to make this tool simple and powerful. The tool is comprised of a GUI editor, a translator and a runtime environment. The GUI editor is used to edit state-transition diagrams, each of which defines the behavior of the fictional characters. The state-transition diagrams are translated into C program codes, which plays the role of a game engine in RPG system. The runtime environment includes PHP, JavaScript with Ajax and HTML. So the prototype system can be played on the usual Web browser, such as Fire-fox, Safari and IE. On a click or key press by a player, the Web browser sends it to the Web server to reflect its consequence on the screens which other players are looking at. Prospected users of this tool include programming novices and schoolchildren. The knowledge or skill of any specific programming languages is not required to create state-transition diagrams. Its structure is not only suitable for the definition of a character behavior but also intuitive to help novices understand. Therefore, the users can easily create Web-based MORPG system with the tool.

Displacement characteristics of a piezoactuator-based prototype microactuator with a hydraulic displacement amplification system

Energy Technology Data Exchange (ETDEWEB)

Muralidhara [NMAMIT, Nitte (India); Rao, Rathnamala [NITK, Surathkal (India)

2015-11-15

In this study, a new piezoactuator-based prototype microactuator is proposed with a hydraulic displacement amplification system. A piezoactuator is used to deflect a diaphragm which displaces a certain volume of hydraulic fluid into a smaller-diameter piston chamber, thereby amplifying the displacement at the other end of the piston. An electro-mechanical model is implemented to estimate the displacement of a multilayer piezoelectric actuator for the applied input voltage considering the hysteresis behavior. The displacement characteristics of the proposed microactuator are studied for triangular actuation voltage signal. Results of the experiments and simulation of the displacement behavior of the stacked piezoactuator and the amplified displacement of the prototype actuator were compared. Experimental results suggest that the mathematical model developed for the new piezoactuator-based prototype actuator is capable of estimating its displacement behavior accurately, within an error of 1.2%.

Displacement characteristics of a piezoactuator-based prototype microactuator with a hydraulic displacement amplification system

International Nuclear Information System (INIS)

Muralidhara; Rao, Rathnamala

2015-01-01

In this study, a new piezoactuator-based prototype microactuator is proposed with a hydraulic displacement amplification system. A piezoactuator is used to deflect a diaphragm which displaces a certain volume of hydraulic fluid into a smaller-diameter piston chamber, thereby amplifying the displacement at the other end of the piston. An electro-mechanical model is implemented to estimate the displacement of a multilayer piezoelectric actuator for the applied input voltage considering the hysteresis behavior. The displacement characteristics of the proposed microactuator are studied for triangular actuation voltage signal. Results of the experiments and simulation of the displacement behavior of the stacked piezoactuator and the amplified displacement of the prototype actuator were compared. Experimental results suggest that the mathematical model developed for the new piezoactuator-based prototype actuator is capable of estimating its displacement behavior accurately, within an error of 1.2%.

Demonstration of a Cultural Indigenous Knowledge Transfer Prototype

DEFF Research Database (Denmark)

Rodil, Kasper; Eskildsen, Søren; Rehm, Matthias

this knowledge to the community’s youths has for many years been situated locally and through intrapersonal interactions. This method of conduct is now being attacked by ‘modern schooling’, where the youths are dislocated from their original communities into the capitol to prepare them for a demanding world...... in [1], reveal deep rural interest in the understanding, transferring and storing of indigenous knowledge from the Herero tribe in Namibia. The Herero community elders possess a great amount of cultural knowledge on husbandry, herb knowledge and religious rituals and the modus operandi of transferring......, increase their digital and textual literacy and to support the development and stability of the country they live in. By using a modern toolbox of animations and game dynamics, we have developed a prototype to allow sharing of indigenous knowledge and to avoid a Western approach the first steps have been...

NetCDF based data archiving system applied to ITER Fast Plant System Control prototype

International Nuclear Information System (INIS)

Castro, R.; Vega, J.; Ruiz, M.; De Arcas, G.; Barrera, E.; López, J.M.; Sanz, D.; Gonçalves, B.; Santos, B.; Utzel, N.; Makijarvi, P.

2012-01-01

Highlights: ► Implementation of a data archiving solution for a Fast Plant System Controller (FPSC) for ITER CODAC. ► Data archiving solution based on scientific NetCDF-4 file format and Lustre storage clustering. ► EPICS control based solution. ► Tests results and detailed analysis of using NetCDF-4 and clustering technologies on fast acquisition data archiving. - Abstract: EURATOM/CIEMAT and Technical University of Madrid (UPM) have been involved in the development of a FPSC (Fast Plant System Control) prototype for ITER, based on PXIe (PCI eXtensions for Instrumentation). One of the main focuses of this project has been data acquisition and all the related issues, including scientific data archiving. Additionally, a new data archiving solution has been developed to demonstrate the obtainable performances and possible bottlenecks of scientific data archiving in Fast Plant System Control. The presented system implements a fault tolerant architecture over a GEthernet network where FPSC data are reliably archived on remote, while remaining accessible to be redistributed, within the duration of a pulse. The storing service is supported by a clustering solution to guaranty scalability, so that FPSC management and configuration may be simplified, and a unique view of all archived data provided. All the involved components have been integrated under EPICS (Experimental Physics and Industrial Control System), implementing in each case the necessary extensions, state machines and configuration process variables. The prototyped solution is based on the NetCDF-4 (Network Common Data Format) file format in order to incorporate important features, such as scientific data models support, huge size files management, platform independent codification, or single-writer/multiple-readers concurrency. In this contribution, a complete description of the above mentioned solution is presented, together with the most relevant results of the tests performed, while focusing in the

Prototype of a Standards-Based EHR and Genetic Test Reporting Tool Coupled with HL7-Compliant Infobuttons

Science.gov (United States)

Crump, Jacob K.; Del Fiol, Guilherme; Williams, Marc S.; Freimuth, Robert R.

2018-01-01

Integration of genetic information is becoming increasingly important in clinical practice. However, genetic information is often ambiguous and difficult to understand, and clinicians have reported low-self-efficacy in integrating genetics into their care routine. The Health Level Seven (HL7) Infobutton standard helps to integrate online knowledge resources within Electronic Health Records (EHRs) and is required for EHR certification in the US. We implemented a prototype of a standards-based genetic reporting application coupled with infobuttons leveraging the Infobutton and Fast Healthcare Interoperability Resources (FHIR) Standards. Infobutton capabilities were provided by Open Infobutton, an open source package compliant with the HL7 Infobutton Standard. The resulting prototype demonstrates how standards-based reporting of genetic results, coupled with curated knowledge resources, can provide dynamic access to clinical knowledge on demand at the point of care. The proposed functionality can be enabled within any EHR system that has been certified through the US Meaningful Use program.

KBGIS-2: A knowledge-based geographic information system

Science.gov (United States)

Smith, T.; Peuquet, D.; Menon, S.; Agarwal, P.

1986-01-01

The architecture and working of a recently implemented knowledge-based geographic information system (KBGIS-2) that was designed to satisfy several general criteria for the geographic information system are described. The system has four major functions that include query-answering, learning, and editing. The main query finds constrained locations for spatial objects that are describable in a predicate-calculus based spatial objects language. The main search procedures include a family of constraint-satisfaction procedures that use a spatial object knowledge base to search efficiently for complex spatial objects in large, multilayered spatial data bases. These data bases are represented in quadtree form. The search strategy is designed to reduce the computational cost of search in the average case. The learning capabilities of the system include the addition of new locations of complex spatial objects to the knowledge base as queries are answered, and the ability to learn inductively definitions of new spatial objects from examples. The new definitions are added to the knowledge base by the system. The system is currently performing all its designated tasks successfully, although currently implemented on inadequate hardware. Future reports will detail the performance characteristics of the system, and various new extensions are planned in order to enhance the power of KBGIS-2.

Architectures of prototypes and architectural prototyping

DEFF Research Database (Denmark)

Hansen, Klaus Marius; Christensen, Michael; Sandvad, Elmer

1998-01-01

together as a team, but developed a prototype that more than fulfilled the expectations of the shipping company. The prototype should: - complete the first major phase within 10 weeks, - be highly vertical illustrating future work practice, - continuously live up to new requirements from prototyping......This paper reports from experience obtained through development of a prototype of a global customer service system in a project involving a large shipping company and a university research group. The research group had no previous knowledge of the complex business of shipping and had never worked...... sessions with users, - evolve over a long period of time to contain more functionality - allow for 6-7 developers working intensively in parallel. Explicit focus on the software architecture and letting the architecture evolve with the prototype played a major role in resolving these conflicting...

An XML Based Knowledge Management System for e-Collaboration and e-Learning

Directory of Open Access Journals (Sweden)

Varun Gopalakrishna

2004-02-01

Full Text Available This paper presents the development, key features, and the implementation principles of a sustainable and scaleable knowledge management system (KMS prototype for creating, capturing, organizing, and managing digital information in the form of Extensible Markup Language (XML documents and other popular file formats. It is aimed to provide a platform for global, instant, and secure access to and dissemination of information within a knowledge-intensive organization or a cluster of organizations through Internet or intranet. A three-tier system architecture was chosen for the KMS to provide performance and scalability while enabling future development that supports global, secure, real-time, and multi-media communication of information and knowledge among team members separated by great distance. An XML Content Server has been employed in this work to store, index, and retrieve large volumes of XML and binary content.

A web-based knowledge management system integrating Western and Traditional Chinese Medicine for relational medical diagnosis.

Science.gov (United States)

Herrera-Hernandez, Maria C; Lai-Yuen, Susana K; Piegl, Les A; Zhang, Xiao

2016-10-26

This article presents the design of a web-based knowledge management system as a training and research tool for the exploration of key relationships between Western and Traditional Chinese Medicine, in order to facilitate relational medical diagnosis integrating these mainstream healing modalities. The main goal of this system is to facilitate decision-making processes, while developing skills and creating new medical knowledge. Traditional Chinese Medicine can be considered as an ancient relational knowledge-based approach, focusing on balancing interrelated human functions to reach a healthy state. Western Medicine focuses on specialties and body systems and has achieved advanced methods to evaluate the impact of a health disorder on the body functions. Identifying key relationships between Traditional Chinese and Western Medicine opens new approaches for health care practices and can increase the understanding of human medical conditions. Our knowledge management system was designed from initial datasets of symptoms, known diagnosis and treatments, collected from both medicines. The datasets were subjected to process-oriented analysis, hierarchical knowledge representation and relational database interconnection. Web technology was implemented to develop a user-friendly interface, for easy navigation, training and research. Our system was prototyped with a case study on chronic prostatitis. This trial presented the system's capability for users to learn the correlation approach, connecting knowledge in Western and Traditional Chinese Medicine by querying the database, mapping validated medical information, accessing complementary information from official sites, and creating new knowledge as part of the learning process. By addressing the challenging tasks of data acquisition and modeling, organization, storage and transfer, the proposed web-based knowledge management system is presented as a tool for users in medical training and research to explore, learn and

Knowledge management method for knowledge based BWR Core Operation Management System

Energy Technology Data Exchange (ETDEWEB)

Wada, Yutaka; Fukuzaki, Takaharu; Kobayashi, Yasuhiro

1989-03-01

A knowledge management method is proposed to support an except whose knowledge is stored in a knowledge base in the BWR Core Operation Management System. When the alterations in the operation plans are motivated by the expert after evaluating them, the method attempts to find the knowledge which must be modified and to give the expert guidances. In this way the resultant operation plans are improved by modifying values of referenced data. Using data dependency among data, which are defined and referred during inference, data to be modified are retrieved. In generating modification guidances, data reference and definition procedures are classified by syntactic analysis of knowledge. The modified data values are calculated with a sensitivity between the increment in the data to be modified and the resultant one in the performance of operation plans. The efficiency of the knowledge management by the proposed method, when applied to the knowledge based system including 500 pieces of knowledge for BWR control rod programming, is higher than that for interactive use of existing general purpose editors. (author).

Knowledge management method for knowledge based BWR Core Operation Management System

International Nuclear Information System (INIS)

Wada, Yutaka; Fukuzaki, Takaharu; Kobayashi, Yasuhiro

1989-01-01

A knowledge management method is proposed to support an except whose knowledge is stored in a knowledge base in the BWR Core Operation Management System. When the alterations in the operation plans are motivated by the expert after evaluating them, the method attempts to find the knowledge which must be modified and to give the expert guidances. In this way the resultant operation plans are improved by modifying values of referenced data. Using data dependency among data, which are defined and referred during inference, data to be modified are retrieved. In generating modification guidances, data reference and definition procedures are classified by syntactic analysis of knowledge. The modified data values are calculated with a sensitivity between the increment in the data to be modified and the resultant one in the performance of operation plans. The efficiency of the knowledge management by the proposed method, when applied to the knowledge based system including 500 pieces of knowledge for BWR control rod programming, is higher than that for interactive use of existing general purpose editors. (author)

Integrated Knowledge Based Expert System for Disease Diagnosis System

Science.gov (United States)

Arbaiy, Nureize; Sulaiman, Shafiza Eliza; Hassan, Norlida; Afizah Afip, Zehan

2017-08-01

The role and importance of healthcare systems to improve quality of life and social welfare in a society have been well recognized. Attention should be given to raise awareness and implementing appropriate measures to improve health care. Therefore, a computer based system is developed to serve as an alternative for people to self-diagnose their health status based on given symptoms. This strategy should be emphasized so that people can utilize the information correctly as a reference to enjoy healthier life. Hence, a Web-based Community Center for Healthcare Diagnosis system is developed based on expert system technique. Expert system reasoning technique is employed in the system to enable information about treatment and prevention of the diseases based on given symptoms. At present, three diseases are included which are arthritis, thalassemia and pneumococcal. Sets of rule and fact are managed in the knowledge based system. Web based technology is used as a platform to disseminate the information to users in order for them to optimize the information appropriately. This system will benefit people who wish to increase health awareness and seek expert knowledge on the diseases by performing self-diagnosis for early disease detection.

Function-oriented display system: background and first prototypes

International Nuclear Information System (INIS)

Andresen, Gisle; Friberg, Maarten; Teigen, Arild; Pirus, Dominique

2004-04-01

The objective of the function-oriented displays and alarm project is to design, implement and evaluate Human System Interfaces (HSI) based on a function-oriented design philosophy. Function-oriented design is an approach for designing HSIs where the plant's functions, identified through a function analysis, are used for determining the content, organisation, and management of displays. The project has used the 'FITNESS approach', originally developed by EDF in France, as a starting point. FITNESS provides an integrated display system consisting of process operating displays, operating procedures, alarms and trend displays - all based on a functional decomposition of the plant. So far, two prototypes have been implemented on the FRESH PWR simulator in HAMMLAB. The first prototype focused on the condensate pumps. Three process operating displays representing functions at different levels of the functional hierarchy were implemented. Computerised startup and shutdown procedures for the condensate pumps function were also implemented. In the second prototype, the scope was increased to cover the main feedwater system. The displays of the first prototype were redesigned and additional displays were created. In conclusion, the first phase of the project has been completed successfully, and we are now ready to enter the second phase. In the second phase, the scope of the prototype will be increased further to include the steam-generators and function-oriented disturbance operating procedures. The prototype will be evaluated in a user test conducted later in 2004. (Author)

A prototype DAQ system for the ALICE experiment based on SCI

International Nuclear Information System (INIS)

Skaali, B.; Ingebrigtsen, L.; Wormald, D.; Polovnikov, S.; Roehrig, H.

1998-01-01

A prototype DAQ system for the ALICE/PHOS beam test an commissioning program is presented. The system has been taking data since August 1997, and represents one of the first applications of the Scalable Coherent Interface (SCI) as interconnect technology for an operational DAQ system. The front-end VMEbus address space is mapped directly from the DAQ computer memory space through SCI via PCI-SCI bridges. The DAQ computer is a commodity PC running the Linux operating system. The results of measurements of data transfer rate and latency for the PCI-SCI bridges in a PC-VMEbus SCI-configuration are presented. An optical SCI link based on the Motorola Optobus I data link is described

Visualization study of operators' plant knowledge model

International Nuclear Information System (INIS)

Kanno, Tarou; Furuta, Kazuo; Yoshikawa, Shinji

1999-03-01

Nuclear plants are typically very complicated systems and are required extremely high level safety on the operations. Since it is never possible to include all the possible anomaly scenarios in education/training curriculum, plant knowledge formation is desired for operators to enable thein to act against unexpected anomalies based on knowledge base decision making. The authors have been conducted a study on operators' plant knowledge model for the purpose of supporting operators' effort in forming this kind of plant knowledge. In this report, an integrated plant knowledge model consisting of configuration space, causality space, goal space and status space is proposed. The authors examined appropriateness of this model and developed a prototype system to support knowledge formation by visualizing the operators' knowledge model and decision making process in knowledge-based actions with this model on a software system. Finally the feasibility of this prototype as a supportive method in operator education/training to enhance operators' ability in knowledge-based performance has been evaluated. (author)

A Methodology for Multiple Rule System Integration and Resolution Within a Singular Knowledge Base

Science.gov (United States)

Kautzmann, Frank N., III

1988-01-01

Expert Systems which support knowledge representation by qualitative modeling techniques experience problems, when called upon to support integrated views embodying description and explanation, especially when other factors such as multiple causality, competing rule model resolution, and multiple uses of knowledge representation are included. A series of prototypes are being developed to demonstrate the feasibility of automating the process of systems engineering, design and configuration, and diagnosis and fault management. A study involves not only a generic knowledge representation; it must also support multiple views at varying levels of description and interaction between physical elements, systems, and subsystems. Moreover, it will involve models of description and explanation for each level. This multiple model feature requires the development of control methods between rule systems and heuristics on a meta-level for each expert system involved in an integrated and larger class of expert system. The broadest possible category of interacting expert systems is described along with a general methodology for the knowledge representation and control of mutually exclusive rule systems.

A knowledge based method for nuclear plant loading pattern determination

International Nuclear Information System (INIS)

Dauboin, P.

1990-01-01

This paper deals with the design of a knowledge based system for solving an industrial problem which occurs in nuclear fuel management. The problem lies in determining satisfactory loading patterns for nuclear plants. Its primary feature consists in the huge search space involved. Conventional resolution processes are formally defined and analyzed: there is no general algorithm which guarantees to always provide a reasonable solution in each situation. We propose a new approach to solve this constrained search problem using domain-specific knowledge and general constraint-based heuristics. During a preprocessing step, a problem dependent search algorithm is designed. This procedure is then automatically implemented in FORTRAN. The generated routines have proved to be very efficient finding solutions which could not have been provided using logic programming. A prototype expert system has already been applied to actual reload pattern searches. While combining efficiency and flexibility, this knowledge based system enables human experts to rapidly match new constraints and requirements

Knowledge-based operator guidance system for Japanese PWRs

International Nuclear Information System (INIS)

Fujita, Y.; Ito, K.; Kawanago, S.; Tani, M.; Murata, R.

1986-01-01

A knowledge-based operator support system for nuclear power plant operation is under development. The main theme of the study is the incorporation of operator's cognitive structure as the framework of the knowledge representation and inference control mechanisms. Based upon information collected from interviews, and experiments using a real-time simulator, an operator's model related to diagnostic tasks was developed. A knowledge-based system incorporating the proposed model demonstrated highly efficient problem solving capabilities and the dynamic fitness to operator's perceptual feeling, thereby suggesting the potential importance and practical benefit of such a study

System for inspection and quality assurance of software - A knowledge-based experiment with code understanding

International Nuclear Information System (INIS)

Das, B.K.

1989-01-01

This paper describes a knowledge-based prototype that inspects and quality-assures software components. The prototype model, which offers a singular representation of these components, is used to automate both the mechanical and nonmechanical activities in the quality assurance (QA) process. It is shown that the prototype, in addition to automating the QA process, provides a novel approach to understanding code. These approaches are compared with recent approaches to code understanding. The paper also presents the results of an experiment with several classes of nonsyntactic bugs. It is argued that a structured environment, as facilitated by this unique architecture, along with software development standards used in the QA process, is essential for meaningful analysis of code. 8 refs

Licensing management system prototype system design

International Nuclear Information System (INIS)

Immerman, W.H.; Arcuni, A.A.; Elliott, J.M.; Chapman, L.D.

1983-11-01

This report is a design document for a prototype implementation of a licensing management system (LMS) as defined in SAND83-7080. It describes the concept of operations for full implementation of an LMS in accordance with the previously defined functional requirements. It defines a subset of a full LMS suitable for meeting prototype implementation goals, and proposes a system design for this subset. The report describes overall system design considerations consistent with, but more explicit than the general characteristics required by the LMS functional definition. A high level design is presented for just those functions selected for prototype implementation. The report also provides a data element dictionary describing the structured logical data elements required to implement the selected functions

“In vitro” Implantation Technique Based on 3D Printed Prosthetic Prototypes

Science.gov (United States)

Tarnita, D.; Boborelu, C.; Geonea, I.; Malciu, R.; Grigorie, L.; Tarnita, D. N.

2018-06-01

In this paper, Rapid Prototyping ZCorp 310 system, based on high-performance composite powder and on resin-high strength infiltration system and three-dimensional printing as a manufacturing method are used to obtain physical prototypes of orthopaedic implants and prototypes of complex functional prosthetic systems directly from the 3D CAD data. These prototypes are useful for in vitro experimental tests and measurements to optimize and obtain final physical prototypes. Using a new elbow prosthesis model prototype obtained by 3D printing, the surgical technique of implantation is established. Surgical implantation was performed on male corpse elbow joint.

Knowledge-based system for automatic MBR control.

Science.gov (United States)

Comas, J; Meabe, E; Sancho, L; Ferrero, G; Sipma, J; Monclús, H; Rodriguez-Roda, I

2010-01-01

MBR technology is currently challenging traditional wastewater treatment systems and is increasingly selected for WWTP upgrading. MBR systems typically are constructed on a smaller footprint, and provide superior treated water quality. However, the main drawback of MBR technology is that the permeability of membranes declines during filtration due to membrane fouling, which for a large part causes the high aeration requirements of an MBR to counteract this fouling phenomenon. Due to the complex and still unknown mechanisms of membrane fouling it is neither possible to describe clearly its development by means of a deterministic model, nor to control it with a purely mathematical law. Consequently the majority of MBR applications are controlled in an "open-loop" way i.e. with predefined and fixed air scour and filtration/relaxation or backwashing cycles, and scheduled inline or offline chemical cleaning as a preventive measure, without taking into account the real needs of membrane cleaning based on its filtration performance. However, existing theoretical and empirical knowledge about potential cause-effect relations between a number of factors (influent characteristics, biomass characteristics and operational conditions) and MBR operation can be used to build a knowledge-based decision support system (KB-DSS) for the automatic control of MBRs. This KB-DSS contains a knowledge-based control module, which, based on real time comparison of the current permeability trend with "reference trends", aims at optimizing the operation and energy costs and decreasing fouling rates. In practice the automatic control system proposed regulates the set points of the key operational variables controlled in MBR systems (permeate flux, relaxation and backwash times, backwash flows and times, aeration flow rates, chemical cleaning frequency, waste sludge flow rate and recycle flow rates) and identifies its optimal value. This paper describes the concepts and the 3-level architecture

Terminological reference of a knowledge-based system: the data dictionary.

Science.gov (United States)

Stausberg, J; Wormek, A; Kraut, U

1995-01-01

The development of open and integrated knowledge bases makes new demands on the definition of the used terminology. The definition should be realized in a data dictionary separated from the knowledge base. Within the works done at a reference model of medical knowledge, a data dictionary has been developed and used in different applications: a term definition shell, a documentation tool and a knowledge base. The data dictionary includes that part of terminology, which is largely independent of a certain knowledge model. For that reason, the data dictionary can be used as a basis for integrating knowledge bases into information systems, for knowledge sharing and reuse and for modular development of knowledge-based systems.

Text-Based On-Line Conferencing: A Conceptual and Empirical Analysis Using a Minimal Prototype.

Science.gov (United States)

McCarthy, John C.; And Others

1993-01-01

Analyzes requirements for text-based online conferencing through the use of a minimal prototype. Topics discussed include prototyping with a minimal system; text-based communication; the system as a message passer versus the system as a shared data structure; and three exercises that showed how users worked with the prototype. (Contains 61…

A knowledge based system for plant diagnosis

International Nuclear Information System (INIS)

Motoda, H.; Yamada, N.; Yoshida, K.

1984-01-01

A knowledge based system for plant diagnosis is proposed in which both event-oriented and function-oriented knowledge are used. For the proposed system to be of practical use, these two types of knowledge are represented by mutually nested four frames, i.e. the component, causality, criteriality, and simulator frames, and production rules. The system provides fast inference capability for use as both a production system and a formal reasoning system, with uncertainty of knowledge taken into account in the former. Event-oriented knowledge is used in both diagnosis and guidance and function-oriented knowledge, in diagnosis only. The inference capability required is forward chaining in the former and resolution in the latter. The causality frame guides in the use of event-oriented knowledge, whereas the criteriality frame does so for function-oriented knowledge. Feedback nature of the plant requires the best first search algorithm that uses histories in the resolution process. The inference program is written in Lisp and the plant simulator and the process I/O control programs in Fortran. Fast data transfer between these two languages is realized by enhancing the memory management capability of Lisp to control the numerical data in the global memory. Simulation applications to a BWR plant demonstrated its diagnostic capability

Designing a nuclear data base prototype using Oracle and Prolog

International Nuclear Information System (INIS)

Paviotti-Corcuera, R.; Ford, C.E.; Perez, R.B.

1988-11-01

An ever-increasing demand exists for easily accessible nuclear data base systems. The purpose of this work is to analyze the feasibility of using artificial intelligence methods as tools to provide the necessary functionality to extract information from nuclear data files in a user-friendly manner. For the prototype of this work, a sample of data that can be later enlarged to a complete, evaluated nuclear data base has been used. To implement this prototype, two approaches have been followed: a conventional approach using the commercially available Oracle relational data base management system; and an artificial intelligence approach using the Prolog programming language. This prototypic work shows the feasibility of applying artificial intelligence methods to data bases, and represents a first step toward development of intelligent nuclear data base systems. The characteristics of the query language from both approaches make the second one preferable from a user's point of view. 23 refs., 7 tabs

INTRODUCTION OF INTERNET OF THING TECHNOLOGY BASED ON PROTOTYPE

Directory of Open Access Journals (Sweden)

Anthony Sutera Genadiarto

2017-01-01

Full Text Available Internet of thing has been able to attract people compete to create various devices. Devices developed have various benefits, but the point is to make life easier. So many vendors create products related to the internet of things, so the user gets confused to determine which is good and appropriate for the needs. To simplify the user in choosing IoT product, this research will discuss about technology that is widely used in IoT, the advantages of each technology, in terms of security, operating system, microcontroller, IoT platform, tools and communication technology. This research makes prototype with one of existing technology. The results of this research provide knowledge, skills and experience in the field of IoT as well as information related to IoT technology, which is widely in the market. Furthermore, the prototype also has the expected functionalities, but it does not close the opportunity for further improvements. The results of this research provide knowledge, skills and experience in the field of IoT as well as information related to IoT technology, which is widely in the market. Furthermore, the prototype also has the expected functionalities, but it does not close the opportunity for further improvements.

The role of internet of things (IOT in knowledge management systems (Case study: Performance management of Yazd municipality staff

Directory of Open Access Journals (Sweden)

Hamid Reza Khedmatgozar

2015-09-01

Full Text Available With the development of Internet of things (IOT technologies in recent years, the development of knowledge management systems based on them, as well as the role of these systems in different organizational areas such as staff performance management should be considered. The objective of this study is to design an application based on the IOT, and analysis of its role in staff performance improvement. The methodology of this study is action research based on the design of information systems with RAD approach and prototyping design method, and focus on one of the performance indicators of the Yazd municipality staff, namely daily working time. The proposed knowledge management based structure to control the entry and exit of staff in the case of study, and implementation of its prototype indicated that IOT can play roles in improving staff performance in six specific areas in two parts of data collection and management of entry and exit. In general, IOT could be used as a reliable basis to generate required data for knowledge management in knowledge based processes, especially knowledge discovery in physical and digital environments.

Knowledge-based reasoning in the Paladin tactical decision generation system

Science.gov (United States)

Chappell, Alan R.

1993-01-01

A real-time tactical decision generation system for air combat engagements, Paladin, has been developed. A pilot's job in air combat includes tasks that are largely symbolic. These symbolic tasks are generally performed through the application of experience and training (i.e. knowledge) gathered over years of flying a fighter aircraft. Two such tasks, situation assessment and throttle control, are identified and broken out in Paladin to be handled by specialized knowledge based systems. Knowledge pertaining to these tasks is encoded into rule-bases to provide the foundation for decisions. Paladin uses a custom built inference engine and a partitioned rule-base structure to give these symbolic results in real-time. This paper provides an overview of knowledge-based reasoning systems as a subset of rule-based systems. The knowledge used by Paladin in generating results as well as the system design for real-time execution is discussed.

Prototypes of risk-based flood forecasting systems in the Netherlands and Italy

Directory of Open Access Journals (Sweden)

Bachmann D.

2016-01-01

Full Text Available Flood forecasting, warning and emergency response are important components of flood management. Currently, the model-based prediction of discharge and/or water level in a river is common practice for operational flood forecasting. Based on the prediction of these values decisions about specific emergency measures are made within emergency response. However, the information provided for decision support is often restricted to pure hydrological or hydraulic aspects of a flood. Information about weak sections within the flood defences, flood prone areas and assets at risk in the protected areas are rarely used in current early warning and response systems. This information is often available for strategic planning, but is not in an appropriate format for operational purposes. This paper presents the extension of existing flood forecasting systems with elements of strategic flood risk analysis, such as probabilistic failure analysis, two dimensional flood spreading simulation and the analysis of flood impacts and consequences. This paper presents the first results from two prototype applications of the new developed concept: The first prototype is applied to the Rotterdam area situated in the western part of the Netherlands. The second pilot study focusses on a rural area between the cities of Mantua and Ferrara along the Po river (Italy.

Devising Enabling Spaces and Affordances for Personal Knowledge Management System Design

Directory of Open Access Journals (Sweden)

Ulrich Schmitt

2017-05-01

Full Text Available Aim/Purpose: Personal Knowledge Management (PKM has been envisaged as a crucial tool for the growing creative class of knowledge workers, but adequate technological solutions have not been forthcoming. Background: Based on former affordance-related publications (primarily concerned with communication, community-building, collaboration, and social knowledge sharing, the common and differing narratives in relation to PKM are investigated in order to suggest further PKM capabilities and affordances in need to be conferred. Methodology: The paper follows up on a series of the author’s PKM-related publications, firmly rooted in design science research (DSR methods and aimed at creating an innovative PKM concept and prototype system. Contribution: The affordances presented offer PKM system users the means to retain and build upon knowledge acquired in order to sustain personal growth and facilitate productive collaborations between fellow learners and/or professional acquaintances. Findings: The results call for an extension of Nonaka’s SECI model and ‘ba’ concept and provide arguments for and evidence supporting the claims that the PKM concept and system is able to facilitate better knowledge traceability and KM practices. Recommendations and Impact on Society: Together with the prior publications, the paper points to current KM shortcomings and presents a novel trans-disciplinary approach offering appealing opportunities for stakeholders engaged in the context of curation, education, research, development, business, and entrepreneurship. Its potential to tackle opportunity divides has been addressed via a PKM for Development (PKM4D Framework. Future DSR Activities: After completing the test phase of the prototype, its transformation into a viable PKM system and cloud-based server based on a rapid development platform and a noSQL-database is estimated to take 12 months.

Prototype-based models in machine learning.

Science.gov (United States)

Biehl, Michael; Hammer, Barbara; Villmann, Thomas

2016-01-01

An overview is given of prototype-based models in machine learning. In this framework, observations, i.e., data, are stored in terms of typical representatives. Together with a suitable measure of similarity, the systems can be employed in the context of unsupervised and supervised analysis of potentially high-dimensional, complex datasets. We discuss basic schemes of competitive vector quantization as well as the so-called neural gas approach and Kohonen's topology-preserving self-organizing map. Supervised learning in prototype systems is exemplified in terms of learning vector quantization. Most frequently, the familiar Euclidean distance serves as a dissimilarity measure. We present extensions of the framework to nonstandard measures and give an introduction to the use of adaptive distances in relevance learning. © 2016 Wiley Periodicals, Inc.

Knowledge based system for control rod programming of BWRs

International Nuclear Information System (INIS)

Fukuzaki, Takaharu; Yoshida, Ken-ichi; Kobayashi, Yasuhiro

1988-01-01

A knowledge based system has been developed to support designers in control rod programming of BWRs. The programming searches through optimal control rod patterns to realize safe and effective burning of nuclear fuel. Knowledge of experienced designers plays the main role in minimizing the number of calculations by the core performance evaluation code. This code predicts power distibution and thermal margins of the nuclear fuel. This knowledge is transformed into 'if-then' type rules and subroutines, and is stored in a knowledge base of the knowledge based system. The system consists of working area, an inference engine and the knowledge base. The inference engine can detect those data which have to be regenerated, call those subroutine which control the user's interface and numerical computations, and store competitive sets of data in different parts of the working area. Using this system, control rod programming of a BWR plant was traced with about 500 rules and 150 subroutines. Both the generation of control rod patterns for the first calculation of the code and the modification of a control rod pattern to reflect the calculation were completed more effectively than in a conventional method. (author)

Knowledge base mechanisms

Energy Technology Data Exchange (ETDEWEB)

Suwa, M; Furukawa, K; Makinouchi, A; Mizoguchi, T; Mizoguchi, F; Yamasaki, H

1982-01-01

One of the principal goals of the Fifth Generation Computer System Project for the coming decade is to develop a methodology for building knowledge information processing systems which will provide people with intelligent agents. The key notion of the fifth generation computer system is knowledge used for problem solving. In this paper the authors describe the plan of Randd on knowledge base mechanisms. A knowledge representation system is to be designed to support knowledge acquisition for the knowledge information processing systems. The system will include a knowledge representation language, a knowledge base editor and a debugger. It is also expected to perform as a kind of meta-inference system. In order to develop the large scale knowledge base systems, a knowledge base mechanism based on the relational model is to be studied in the earlier stage of the project. Distributed problem solving is also one of the main issues of the project. 19 references.

Dynamic reasoning in a knowledge-based system

Science.gov (United States)

Rao, Anand S.; Foo, Norman Y.

1988-01-01

Any space based system, whether it is a robot arm assembling parts in space or an onboard system monitoring the space station, has to react to changes which cannot be foreseen. As a result, apart from having domain-specific knowledge as in current expert systems, a space based AI system should also have general principles of change. This paper presents a modal logic which can not only represent change but also reason with it. Three primitive operations, expansion, contraction and revision are introduced and axioms which specify how the knowledge base should change when the external world changes are also specified. Accordingly the notion of dynamic reasoning is introduced, which unlike the existing forms of reasoning, provide general principles of change. Dynamic reasoning is based on two main principles, namely minimize change and maximize coherence. A possible-world semantics which incorporates the above two principles is also discussed. The paper concludes by discussing how the dynamic reasoning system can be used to specify actions and hence form an integral part of an autonomous reasoning and planning system.

Prototype-based models in machine learning

NARCIS (Netherlands)

Biehl, Michael; Hammer, Barbara; Villmann, Thomas

2016-01-01

An overview is given of prototype-based models in machine learning. In this framework, observations, i.e., data, are stored in terms of typical representatives. Together with a suitable measure of similarity, the systems can be employed in the context of unsupervised and supervised analysis of

Structural design systems using knowledge-based techniques

International Nuclear Information System (INIS)

Orsborn, K.

1993-01-01

Engineering information management and the corresponding information systems are of a strategic importance for industrial enterprises. This thesis treats the interdisciplinary field of designing computing systems for structural design and analysis using knowledge-based techniques. Specific conceptual models have been designed for representing the structure and the process of objects and activities in a structural design and analysis domain. In this thesis, it is shown how domain knowledge can be structured along several classification principles in order to reduce complexity and increase flexibility. By increasing the conceptual level of the problem description and representation of the domain knowledge in a declarative form, it is possible to enhance the development, maintenance and use of software for mechanical engineering. This will result in a corresponding increase of the efficiency of the mechanical engineering design process. These ideas together with the rule-based control point out the leverage of declarative knowledge representation within this domain. Used appropriately, a declarative knowledge representation preserves information better, is more problem-oriented and change-tolerant than procedural representations. 74 refs

Development of knowledge base system linked to material database

International Nuclear Information System (INIS)

Kaji, Yoshiyuki; Tsuji, Hirokazu; Mashiko, Shinichi; Miyakawa, Shunichi; Fujita, Mitsutane; Kinugawa, Junichi; Iwata, Shuichi

2002-01-01

The distributed material database system named 'Data-Free-Way' has been developed by four organizations (the National Institute for Materials Science, the Japan Atomic Energy Research Institute, the Japan Nuclear Cycle Development Institute, and the Japan Science and Technology Corporation) under a cooperative agreement in order to share fresh and stimulating information as well as accumulated information for the development of advanced nuclear materials, for the design of structural components, etc. In order to create additional values of the system, knowledge base system, in which knowledge extracted from the material database is expressed, is planned to be developed for more effective utilization of Data-Free-Way. XML (eXtensible Markup Language) has been adopted as the description method of the retrieved results and the meaning of them. One knowledge note described with XML is stored as one knowledge which composes the knowledge base. Since this knowledge note is described with XML, the user can easily convert the display form of the table and the graph into the data format which the user usually uses. This paper describes the current status of Data-Free-Way, the description method of knowledge extracted from the material database with XML and the distributed material knowledge base system. (author)

Prototype Centralized Managing Permissions System Based on the Election Multibiometric Authentication

Directory of Open Access Journals (Sweden)

Alexey Nikolaevich Ruchay

2013-02-01

Full Text Available This work aims to develop a prototype system of centralized managing permissions based on the election multibiometric authentication. The novelty of this work is to develop the principles of distinction and multi-factor authentication, because at the moment there is no such development. Depending on various conditions and factors, including the availability of electronic means and convenience, resistance to attacks and exploits, disease or injury of users the biometric authentication can be selected on the basis of any such biometrics as rhythm password, voice, dynamic signatures and graphics recognition.

Knowledge Representation and Reasoning in Personalized Web-Based e-Learning Applications

DEFF Research Database (Denmark)

Dolog, Peter

2006-01-01

a user inferred from user interactions with the eLeanrning systems is used to adapt o®ered learning resources and guide a learner through them. This keynote gives an overview about knowledge and rules taken into account in current adaptive eLearning prototypes when adapting learning instructions....... Adaptation is usually based on knowledge about learning esources and users. Rules are used for heuristics to match the learning resources with learners and infer adaptation decisions.......Adaptation that is so natural for teaching by humans is a challenging issue for electronic learning tools. Adaptation in classic teaching is based on observations made about students during teaching. Similar idea was employed in user-adapted (personalized) eLearning applications. Knowledge about...

Knowledge management: An abstraction of knowledge base and database management systems

Science.gov (United States)

Riedesel, Joel D.

1990-01-01

Artificial intelligence application requirements demand powerful representation capabilities as well as efficiency for real-time domains. Many tools exist, the most prevalent being expert systems tools such as ART, KEE, OPS5, and CLIPS. Other tools just emerging from the research environment are truth maintenance systems for representing non-monotonic knowledge, constraint systems, object oriented programming, and qualitative reasoning. Unfortunately, as many knowledge engineers have experienced, simply applying a tool to an application requires a large amount of effort to bend the application to fit. Much work goes into supporting work to make the tool integrate effectively. A Knowledge Management Design System (KNOMAD), is described which is a collection of tools built in layers. The layered architecture provides two major benefits; the ability to flexibly apply only those tools that are necessary for an application, and the ability to keep overhead, and thus inefficiency, to a minimum. KNOMAD is designed to manage many knowledge bases in a distributed environment providing maximum flexibility and expressivity to the knowledge engineer while also providing support for efficiency.

Rapid Prototyping of Formally Modelled Distributed Systems

OpenAIRE

Buchs, Didier; Buffo, Mathieu; Titsworth, Frances M.

1999-01-01

This paper presents various kinds of prototypes, used in the prototyping of formally modelled distributed systems. It presents the notions of prototyping techniques and prototype evolution, and shows how to relate them to the software life-cycle. It is illustrated through the use of the formal modelling language for distributed systems CO-OPN/2.

Prototype system of secure VOD

Science.gov (United States)

Minemura, Harumi; Yamaguchi, Tomohisa

1997-12-01

Secure digital contents delivery systems are to realize copyright protection and charging mechanism, and aim at secure delivery service of digital contents. Encrypted contents delivery and history (log) management are means to accomplish this purpose. Our final target is to realize a video-on-demand (VOD) system that can prevent illegal usage of video data and manage user history data to achieve a secure video delivery system on the Internet or Intranet. By now, mainly targeting client-server systems connected with enterprise LAN, we have implemented and evaluated a prototype system based on the investigation into the delivery method of encrypted video contents.

Development of a knowledge-based system for loop diagnosis

International Nuclear Information System (INIS)

Liao, L.Y.; Tang, H.C.; Chen, S.S.

1987-01-01

An accident diagnostic system is developed as an attempt to provide a useful aid for the operators of an experimental loop or a nuclear power plant in the case of emergency condition. Because the current practices in the system diagnosis are not satisfactory, there is an increasing demand on the establishment of various operator decision support systems. The knowledge based system is a new and promising technique which can be used to fulfill this demand. With the capability of automatic reasoning and by incorporating the information about system status, the knowledge based system can simulate the process of human thinking and serve as a good decision support system. This knowledge based decision support system can be helpful for both a fast, violent accident and a slowly developed accident. Specifically, a fast diagnostic report can be provided for a fast and violent accident of which time is the main concern and a complete diagnostic report can be provided for a slowly developed accident of which complexity is the main concern. Such a knowledge based decision support system also provides many other equally important advantages, such as the elimination of human error, the automatic validation of signal readings, the establishment of human error, the automatic validation of signal readings, and the establishment of a simulation environment

Development of a tool for knowledge base verification of expert system based on Design/CPN

International Nuclear Information System (INIS)

Kim, Jong Hyun

1998-02-01

Verification is a necessary work in developing a reliable expert system. Verification is a process aimed at demonstrating whether a system meets it's specified requirements. As expert systems are used in various applications, the knowledge base verification of systems takes an important position. The conventional Petri net approach that has been studied recently in order to verify the knowledge base is found that it is inadequate to verify the knowledge base of large and complex system, such as alarm processing system of nuclear power plant. Thus, we propose an improved method that models the knowledge base as enhanced colored Petri net. In this study, we analyze the reachability and the error characteristics of the knowledge base. Generally, verification process requires computational support by automated tools. For this reason, this study developed a tool for knowledge base verification based on Design/CPN, which is a tool for editing, modeling, and simulating Colored Petri net. This tool uses Enhanced Colored Petri net as a modeling method. By applying this tool to the knowledge base of nuclear power plant, it is noticed that it can successfully check most of the anomalies that can occur in a knowledge base

A knowledge-based assistant for valve maintenance planning

International Nuclear Information System (INIS)

Winter, M.J.; Danofsky, R.A.; Spinrad, B.I.; Howard, K.

1987-01-01

A knowledge-based program is being developed to assist engineers in maintenance planning for safety related, motor-operated valves at a boiling water reactor. The purpose of this project is to develop the general framework for a prototype system that demonstrates the capabilities for diagnosing valve symptoms and prescribing corrective maintenance, completing a portion of the Corrective Maintenance Action Request (CMAR) form which must be prepared for each job, and managing an interactive valve data base. Minimizing user input and providing output in a form that is familiar to the maintenance planning engineer are important goals for the program. This paper describes the present features of the valve maintenance advisory system which is currently being tested

Surrogates-based prototyping

NARCIS (Netherlands)

Du Bois, E.; Horvath, I.

2014-01-01

The research is situated in the system development phase of interactive software products. In this detailed design phase, we found a need for fast testable prototyping to achieve qualitative change proposals on the system design. In this paper, we discuss a literature study on current software

Prototypic implementations of the building block for component based open Hypermedia systems (BB/CB-OHSs)

DEFF Research Database (Denmark)

Mohamed, Omer I. Eldai

2005-01-01

In this paper we describe the prototypic implementations of the BuildingBlock (BB/CB-OHSs) that proposed to address some of the Component-based Open Hypermedia Systems (CB-OHSs) issues, including distribution and interoperability [4, 11, 12]. Four service implementations were described below. The...

The construction and evaluation of a prototype system for an image intensifier-based volume computed tomography imager

International Nuclear Information System (INIS)

Ning, R.

1989-01-01

A volumetric reconstruction of a three-dimensional (3-D) object has been at the forefront of exploration in medical applications for a long time. To achieve this goal, a prototype system for an image intensifier(II)-based volume computed tomography (CT) imager has been constructed. This research has been concerned with constructing and evaluating such a prototype system by phantom studies. The prototype system consists of a fixed x-ray tube, a specially designed aluminum filter that will reduce the dynamic range of projection data, an antiscatter grid, a conventional image intensifier optically coupled to a charge-coupled device (CCC) camera, a computer controlled turntable on which phantoms are placed, a digital computer including an A/D converter and a graphic station that displays the reconstructed images. In this study, three different phantoms were used: a vascular phantom, a resolution phantom and a Humanoid reg-sign chest phantom. The direct 3-D reconstruction from the projections was performed using a cone beam algorithm and vascular reconstruction algorithms. The image performance of the system for the direct 3-D reconstruction was evaluated. The spatial resolution limits of the system were estimated through observing the reconstructed images of the resolution phantom. By observing the images reconstructed from the projections, it can be determined that the image performance of the prototype system for a direct 3-D reconstruction is reasonably good and that the vascular reconstruction algorithms work very well. The results also indicate that the 3-D reconstructions obtained with the 11-based volume CT imager have nearly equally good resolution in x, y and z directions and are superior to a conventional CT in the resolution of the z direction

The representation of knowledge within model-based control systems

International Nuclear Information System (INIS)

Weygand, D.P.; Koul, R.

1987-01-01

Representation of knowledge in artificially intelligent systems is discussed. Types of knowledge that might need to be represented in AI systems are listed, and include knowledge about objects, events, knowledge about how to do things, and knowledge about what human beings know (meta-knowledge). The use of knowledge in AI systems is discussed in terms of acquiring and retrieving knowledge and reasoning about known facts. Different kinds of reasonings or representations are ghen described with some examples given. These include formal reasoning or logical representation, which is related to mathematical logic, production systems, which are based on the idea of condition-action pairs (production), procedural reasoning, which uses pre-formed plans to solve problems, frames, which provide a structure for representing knowledge in an organized manner, direct analogical representations, which represent knowledge in such a manner that permits some observation without deduction

A system for rapid prototyping of hearts with congenital malformations based on the medical imaging interaction toolkit (MITK)

Science.gov (United States)

Wolf, Ivo; Böttger, Thomas; Rietdorf, Urte; Maleike, Daniel; Greil, Gerald; Sieverding, Ludger; Miller, Stephan; Mottl-Link, Sibylle; Meinzer, Hans-Peter

2006-03-01

Precise knowledge of the individual cardiac anatomy is essential for diagnosis and treatment of congenital heart disease. Complex malformations of the heart can best be comprehended not from images but from anatomic specimens. Physical models can be created from data using rapid prototyping techniques, e.g., lasersintering or 3D-printing. We have developed a system for obtaining data that show the relevant cardiac anatomy from high-resolution CT/MR images and are suitable for rapid prototyping. The challenge is to preserve all relevant details unaltered in the produced models. The main anatomical structures of interest are the four heart cavities (atria, ventricles), the valves and the septum separating the cavities, and the great vessels. These can be shown either by reproducing the morphology itself or by producing a model of the blood-pool, thus creating a negative of the morphology. Algorithmically the key issue is segmentation. Practically, possibilities allowing the cardiologist or cardiac surgeon to interactively check and correct the segmentation are even more important due to the complex, irregular anatomy and imaging artefacts. The paper presents the algorithmic and interactive processing steps implemented in the system, which is based on the open-source Medical Imaging Interaction Toolkit (MITK, www.mitk.org). It is shown how the principles used in MITK enable to assemble the system from modules (functionalities) developed independently from each other. The system allows to produce models of the heart (and other anatomic structures) of individual patients as well as to reproduce unique specimens from pathology collections for teaching purposes.

Designing a prototype of the ITER pulse scheduling system

International Nuclear Information System (INIS)

Yamamoto, T.; Yonekawa, I.; Ohta, K.; Hosoyama, H.; Hashimoto, Y.; Wallander, A.; Winter, A.; Sugie, T.; Kusama, Y.; Kawano, Y.; Yoshino, R.

2012-01-01

Highlights: ► We designed a prototype of the ITER pulse scheduling system. ► Structure of ITER pulse schedules was designed. ► Validation and automatic value assignment functions were adopted. ► A prototype will be implemented in 2011. - Abstract: A prototype of the ITER pulse scheduling system that prepares and manages parameters for ITER plasma operations has been designed. Based on the analyzed requirements on the system, structure of the parameters and necessary functions were determined. Segment and module structures were tuned to the ITER requirements. Three types of validations assure sanity of the parameters. The design limits check and the operation window check verify whether the values of the parameters do not exceed the limits. The consistency check calculates dependency among parameters in accordance with logics described in a scripting language. The ITER pulse scheduling system provides interface with a physics model and simulator. Some abstract physics parameters are converted to engineering parameters with the physics simulation. The results of simulation such as plasma characteristics of specified parameters are also shown to the researchers. The tool to specify the parameters is data-driven. Therefore, it is flexible for changes of number of the parameters. A prototype is being implemented in 2011. Using the prototype, this design will be verified and refined. The evaluation of the prototype will be a basis of the final production of the ITER pulse scheduling system.

An expert system for vibration based diagnostics of rotating machines

International Nuclear Information System (INIS)

Korteniemi, A.

1990-01-01

Very often changes in the mechanical condition of the rotating machinery can be observed as changes in its vibration. This paper presents an expert system for vibration-based diagnosis of rotating machines by describing the architecture of the developed prototype system. The importance of modelling the problem solving knowledge as well as the domain knowledge is emphasized by presenting the knowledge in several levels

PANDA Muon System Prototype

Science.gov (United States)

Abazov, Victor; Alexeev, Gennady; Alexeev, Maxim; Frolov, Vladimir; Golovanov, Georgy; Kutuzov, Sergey; Piskun, Alexei; Samartsev, Alexander; Tokmenin, Valeri; Verkheev, Alexander; Vertogradov, Leonid; Zhuravlev, Nikolai

2018-04-01

The PANDA Experiment will be one of the key experiments at the Facility for Antiproton and Ion Research (FAIR) which is under construction now in the territory of the GSI Helmholtz Centre for Heavy Ion Research in Darmstadt, Germany. PANDA is aimed to study hadron spectroscopy and various topics of the weak and strong forces. Muon System is chosen as the most suitable technology for detecting the muons. The Prototype of the PANDA Muon System is installed on the test beam line T9 at the Proton Synchrotron (PS) at CERN. Status of the PANDA Muon System prototype is presented with few preliminary results.

PANDA Muon System Prototype

Directory of Open Access Journals (Sweden)

Abazov Victor

2018-01-01

Full Text Available The PANDA Experiment will be one of the key experiments at the Facility for Antiproton and Ion Research (FAIR which is under construction now in the territory of the GSI Helmholtz Centre for Heavy Ion Research in Darmstadt, Germany. PANDA is aimed to study hadron spectroscopy and various topics of the weak and strong forces. Muon System is chosen as the most suitable technology for detecting the muons. The Prototype of the PANDA Muon System is installed on the test beam line T9 at the Proton Synchrotron (PS at CERN. Status of the PANDA Muon System prototype is presented with few preliminary results.

Knowledge-based information systems in practice

CERN Document Server

Jain, Lakhmi; Watada, Junzo; Howlett, Robert

2015-01-01

This book contains innovative research from leading researchers who presented their work at the 17th International Conference on Knowledge-Based and Intelligent Information and Engineering Systems, KES 2013, held in Kitakyusha, Japan, in September 2013. The conference provided a competitive field of 236 contributors, from which 38 authors expanded their contributions and only 21 published. A plethora of techniques and innovative applications are represented within this volume. The chapters are organized using four themes. These topics include: data mining, knowledge management, advanced information processes and system modelling applications. Each topic contains multiple contributions and many offer case studies or innovative examples. Anyone that wants to work with information repositories or process knowledge should consider reading one or more chapters focused on their technique of choice. They may also benefit from reading other chapters to assess if an alternative technique represents a more suitable app...

Transforming paper-based assessment forms to a digital format: Exemplified by the Housing Enabler prototype app.

Science.gov (United States)

Svarre, Tanja; Lunn, Tine Bieber Kirkegaard; Helle, Tina

2017-11-01

The aim of this paper is to provide the reader with an overall impression of the stepwise user-centred design approach including the specific methods used and lessons learned when transforming paper-based assessment forms into a prototype app, taking the Housing Enabler as an example. Four design iterations were performed, building on a domain study, workshops, expert evaluation and controlled and realistic usability tests. The user-centred design process involved purposefully selected participants with different Housing Enabler knowledge and housing adaptation experience. The design iterations resulted in the development of a Housing Enabler prototype app. The prototype app has several features and options that are new compared with the original paper-based Housing Enabler assessment form. These new features include a user friendly overview of the assessment form; easy navigation by swiping back and forth between items; onsite data analysis; and ranking of the accessibility score, photo documentation and a data export facility. Based on the presented stepwise approach, a high-fidelity Housing Enabler prototype app was successfully developed. The development process has emphasized the importance of combining design participants' knowledge and experiences, and has shown that methods should seem relevant to participants to increase their engagement.

Integrated knowledge base tool for acquisition and verification of NPP alarm systems

International Nuclear Information System (INIS)

Park, Joo Hyun; Seong, Poong Hyun

1998-01-01

Knowledge acquisition and knowledge base verification are important activities in developing knowledge-based systems such as alarm processing systems. In this work, we developed the integrated tool, for knowledge acquisition and verification of NPP alarm processing systems, by using G2 tool. The tool integrates document analysis method and ECPN matrix analysis method, for knowledge acquisition and knowledge verification, respectively. This tool enables knowledge engineers to perform their tasks from knowledge acquisition to knowledge verification consistently

Prototype of an expert system based nuclear power plant information systems

International Nuclear Information System (INIS)

Vegh, J.; Bodnar, M.; Buerger, L.; Tanyi, M.; Sefesik, F.

1994-01-01

The components and functioning of the GPCS information system applicable for intelligent process monitoring and alarm generation in a WWER-440 type nuclear power plant are described. The prototype system has been developed by using the G2 expert system, plant measurements were simulated by a WWER-440 compact simulator and by archive replay sessions performed by the VERONA-u core monitoring system. The GPCS contains an object oriented description of the basic subsystems of the plant and concentrates on the fast evaluation/displaying of measurements and alarms. The high-level information reflecting actual plant safety status is synthesized from primary measured data, by forming global alarms and by evaluating logical diagrams. (author). 10 refs, 4 figs

Knowledge-based fault diagnosis system for refuse collection vehicle

International Nuclear Information System (INIS)

Tan, CheeFai; Juffrizal, K.; Khalil, S. N.; Nidzamuddin, M. Y.

2015-01-01

The refuse collection vehicle is manufactured by local vehicle body manufacturer. Currently; the company supplied six model of the waste compactor truck to the local authority as well as waste management company. The company is facing difficulty to acquire the knowledge from the expert when the expert is absence. To solve the problem, the knowledge from the expert can be stored in the expert system. The expert system is able to provide necessary support to the company when the expert is not available. The implementation of the process and tool is able to be standardize and more accurate. The knowledge that input to the expert system is based on design guidelines and experience from the expert. This project highlighted another application on knowledge-based system (KBS) approached in trouble shooting of the refuse collection vehicle production process. The main aim of the research is to develop a novel expert fault diagnosis system framework for the refuse collection vehicle

Knowledge-based fault diagnosis system for refuse collection vehicle

Energy Technology Data Exchange (ETDEWEB)

Tan, CheeFai; Juffrizal, K.; Khalil, S. N.; Nidzamuddin, M. Y. [Centre of Advanced Research on Energy, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, Durian Tunggal, Melaka (Malaysia)

2015-05-15

The refuse collection vehicle is manufactured by local vehicle body manufacturer. Currently; the company supplied six model of the waste compactor truck to the local authority as well as waste management company. The company is facing difficulty to acquire the knowledge from the expert when the expert is absence. To solve the problem, the knowledge from the expert can be stored in the expert system. The expert system is able to provide necessary support to the company when the expert is not available. The implementation of the process and tool is able to be standardize and more accurate. The knowledge that input to the expert system is based on design guidelines and experience from the expert. This project highlighted another application on knowledge-based system (KBS) approached in trouble shooting of the refuse collection vehicle production process. The main aim of the research is to develop a novel expert fault diagnosis system framework for the refuse collection vehicle.

A real time knowledge-based alarm system EXTRA

International Nuclear Information System (INIS)

Ancelin, J.; Gaussot, J.P.; Legaud, P.

1987-01-01

EXTRA is an experimental expert system for industrial process control. The main objectives are the diagnosis and operation aids. From a methodological point of view, EXTRA is based on a deep knowledge of the plant operation and on qualitative simulation principles. The application concerns all the electric power and the Chemical and Volume Control System of a P.W.R. nuclear plant. The tests conducted on a full-scope simulator representative of the real plant yielded excellent results and taught the authors a number of lessons. The main lesson concerns the efficiency and flexibility provided by the combination of a knowledge-based system and of an advanced mini-computer

Knowledge-based public health situation awareness

Science.gov (United States)

Mirhaji, Parsa; Zhang, Jiajie; Srinivasan, Arunkumar; Richesson, Rachel L.; Smith, Jack W.

2004-09-01

There have been numerous efforts to create comprehensive databases from multiple sources to monitor the dynamics of public health and most specifically to detect the potential threats of bioterrorism before widespread dissemination. But there are not many evidences for the assertion that these systems are timely and dependable, or can reliably identify man made from natural incident. One must evaluate the value of so called 'syndromic surveillance systems' along with the costs involved in design, development, implementation and maintenance of such systems and the costs involved in investigation of the inevitable false alarms1. In this article we will introduce a new perspective to the problem domain with a shift in paradigm from 'surveillance' toward 'awareness'. As we conceptualize a rather different approach to tackle the problem, we will introduce a different methodology in application of information science, computer science, cognitive science and human-computer interaction concepts in design and development of so called 'public health situation awareness systems'. We will share some of our design and implementation concepts for the prototype system that is under development in the Center for Biosecurity and Public Health Informatics Research, in the University of Texas Health Science Center at Houston. The system is based on a knowledgebase containing ontologies with different layers of abstraction, from multiple domains, that provide the context for information integration, knowledge discovery, interactive data mining, information visualization, information sharing and communications. The modular design of the knowledgebase and its knowledge representation formalism enables incremental evolution of the system from a partial system to a comprehensive knowledgebase of 'public health situation awareness' as it acquires new knowledge through interactions with domain experts or automatic discovery of new knowledge.

Formal Support for Development of Knowledge-Based Systems

NARCIS (Netherlands)

Fensel, Dieter; Van Harmelen, Frank; Reif, Wolfgang; Ten Teije, Annette

1998-01-01

This article provides an approach for developing reliable knowledge-based systems. Its main contributions are: Specification is done at an architectural level that abstracts from a specific implementation formalism. The model of expertise of CommonKADS distinguishs different types of knowledge and

IGENPRO knowledge-based digital system for process transient diagnostics and management

International Nuclear Information System (INIS)

Morman, J.A.; Reifman, J.; Vitela, J.E.; Wei, T.Y.C.; Applequist, C.A.; Hippely, P.; Kuk, W.; Tsoukalas, L.H.

1998-01-01

Verification and validation issues have been perceived as important factors in the large scale deployment of knowledge-based digital systems for plant transient diagnostics and management. Research and development (R and D) is being performed on the IGENPRO package to resolve knowledge base issues. The IGENPRO approach is to structure the knowledge bases on generic thermal-hydraulic (T-H) first principles and not use the conventional event-basis structure. This allows for generic comprehensive knowledge, relatively small knowledge bases and above all the possibility of T-H system/plant independence. To demonstrate concept feasibility the knowledge structure has been implemented in the diagnostic module PRODIAG. Promising laboratory testing results have been obtained using data from the full scope Braidwood PWR operator training simulator. This knowledge structure is now being implemented in the transient management module PROMANA to treat unanticipated events and the PROTREN module is being developed to process actual plant data. Achievement of the IGENPRO R and D goals should contribute to the acceptance of knowledge-based digital systems for transient diagnostics and management. (author)

IGENPRO knowledge-based digital system for process transient diagnostics and management

International Nuclear Information System (INIS)

Morman, J.A.; Reifman, J.; Wei, T.Y.C.

1997-01-01

Verification and validation issues have been perceived as important factors in the large scale deployment of knowledge-based digital systems for plant transient diagnostics and management. Research and development (R ampersand D) is being performed on the IGENPRO package to resolve knowledge base issues. The IGENPRO approach is to structure the knowledge bases on generic thermal-hydraulic (T-H) first principles and not use the conventional event-basis structure. This allows for generic comprehensive knowledge, relatively small knowledge bases and above all the possibility of T-H system/plant independence. To demonstrate concept feasibility the knowledge structure has been implemented in the diagnostic module PRODIAG. Promising laboratory testing results have been obtained using data from the full scope Braidwood PWR operator training simulator. This knowledge structure is now being implemented in the transient management module PROMANA to treat unanticipated events and the PROTREN module is being developed to process actual plant data. Achievement of the IGENPRO R ampersand D goals should contribute to the acceptance of knowledge-based digital systems for transient diagnostics and management

A knowledge-based system for monitoring the electrical power system of the Hubble Space Telescope

Science.gov (United States)

Eddy, Pat

1987-01-01

The design and the prototype for the expert system for the Hubble Space Telescope's electrical power system are discussed. This prototype demonstrated the capability to use real time data from a 32k telemetry stream and to perform operational health and safety status monitoring, detect trends such as battery degradation, and detect anomalies such as solar array failures. This prototype, along with the pointing control system and data management system expert systems, forms the initial Telemetry Analysis for Lockheed Operated Spacecraft (TALOS) capability.

Deep knowledge expert system for diagnosis of multiple-failure severe transients in nuclear power plant

International Nuclear Information System (INIS)

Martin, R.P.; Nassersharif, B.

1987-01-01

TAMUS (Transient Analysis of MUltiple-failure Simulations) is a prototype expert system which is the result of a project investigating and implementing event confidence-levels (used by reactor safety experts in reactor transient analysis) in the form of an expert system. Currently, TAMUS is designed to diagnose reactor transients by analyzing simulated sensor and plant thermal hydraulic information from a system simulation. TAMUS uses a knowledge base of existing emergency nuclear plant operating guidelines and detailed thermal-hydraulic calculating results correlated to confidence-levels. TAMUS can diagnose a number of reactor transients (for example, loss-of-coolant accidents, steam-generator-tube ruptures, loss-of-offsite power, etc.). Future work includes the expansion of the knowledge base and improvement of the deep-knowledge qualitative models

Prototype Development of an ICT System to Support Construction Management Based on Virtual Models and RFID

DEFF Research Database (Denmark)

Sørensen, Kristian Birch; Christiansson, Per; Svidt, Kjeld

2009-01-01

early example) of an ICT system was carried out to identify and formalise user needs in relation to construction management based on virtual models and radio frequency identification (RFID). The prototype was developed to support working processes in real-time project progress management, quality...

Prototype of a silicon nitride ceramic-based miniplate osteofixation system for the midface.

Science.gov (United States)

Neumann, Andreas; Unkel, Claus; Werry, Christoph; Herborn, Christoh U; Maier, Horst R; Ragoss, Christian; Jahnke, Klaus

2006-06-01

The favorable properties of silicon nitride (Si3N4) ceramics, such as high mean strength level and fracture toughness, suggest biomedical use as an implant material. Minor reservations about the biocompatibility of Si3N4 ceramics were cleared up by previous in vitro and in vivo investigations. A Si3N4 prototype minifixation system was manufactured and implanted for osteosynthesis of artificial frontal bone defects in 3 minipigs. After 3 months, histological sections, computed tomography (CT) scans, and magnetic resonance imaging (MRI) scans were obtained. Finite element modeling (FEM) was used to simulate stresses and strains on Si3N4 miniplates and screws to calculate survival probabilities. Si3N4 miniplates and screws showed satisfying intraoperative workability. There was no implant loss, displacement, or fracture. Bone healing was complete in all animals. The formation of new bone was observed in direct contact to the implants. The implants showed no artifacts on CT and MRI scanning. FEM simulation confirmed the mechanical reliability of the screws, whereas simulated plate geometries regarding pullout forces at maximum load showed limited safety in a bending situation. Si3N4 ceramics show a good biocompatibility outcome both in vitro and in vivo. In ENT surgery, this ceramic may serve as a biomaterial for osteosynthesis (eg, of the midface including reconstruction the floor of the orbit and the skull base). To our knowledge, this is the first introduction of a ceramic-based miniplate-osteofixation system. Advantages compared with titanium are no risk of implantation to bone with mucosal attachment, no need for explantation, and no interference with radiologic imaging. Disadvantages include the impossibility of individual bending of the miniplates.

NAVIGATING PROTOTYPING SPACES FOR CO-DESIGN OF ACTOR-NETWORKS

DEFF Research Database (Denmark)

Pedersen, Signe; Brodersen, Søsser

2017-01-01

of diverse actors in what we term prototyping spaces. In these prototyping spaces, prototypes play an important role in visualising controversies, enabling matters of concern to be negotiated, and making knowledge transparent throughout the design process. Based on a case study of a pilot program to make...... of temporary prototyping spaces, which are to be staged and facilitated to allow various actors to negotiate matters of concern. Designers then translate the resulting knowledge and insights into pro-totypes for use in subsequent spaces and eventually into an actor-network com-prising the final solution....

A Knowledge-Base for a Personalized Infectious Disease Risk Prediction System.

Science.gov (United States)

Vinarti, Retno; Hederman, Lucy

2018-01-01

We present a knowledge-base to represent collated infectious disease risk (IDR) knowledge. The knowledge is about personal and contextual risk of contracting an infectious disease obtained from declarative sources (e.g. Atlas of Human Infectious Diseases). Automated prediction requires encoding this knowledge in a form that can produce risk probabilities (e.g. Bayesian Network - BN). The knowledge-base presented in this paper feeds an algorithm that can auto-generate the BN. The knowledge from 234 infectious diseases was compiled. From this compilation, we designed an ontology and five rule types for modelling IDR knowledge in general. The evaluation aims to assess whether the knowledge-base structure, and its application to three disease-country contexts, meets the needs of personalized IDR prediction system. From the evaluation results, the knowledge-base conforms to the system's purpose: personalization of infectious disease risk.

A knowledge-based system for fluidization studies

Energy Technology Data Exchange (ETDEWEB)

1990-04-01

Chemical engineers depend on process simulation models to determine optimal'' plant configurations which are technically feasible and economically viable. This research was undertaken to develop a comprehensive knowledge based simulation environment IPSE (Intelligent Process Simulation Environment) that can enhance the productivity of chemical engineers/modelers by serving as an intelligent assistant during all phases of process simulation involving fossil energy processes. In summary, the goals of this research are: application of knowledge-based techniques to the process modeling domain for enhancement of productivity; archiving and distribution of the knowledge of the best experts of process modeling; cross-model inference assistance to modelers not familiar with the process; and development of IPSE to serve as an intelligent tutoring system for process simulation. 18 figs.

Fault Risk Assessment of Underwater Vehicle Steering System Based on Virtual Prototyping and Monte Carlo Simulation

Directory of Open Access Journals (Sweden)

He Deyu

2016-09-01

Full Text Available Assessing the risks of steering system faults in underwater vehicles is a human-machine-environment (HME systematic safety field that studies faults in the steering system itself, the driver’s human reliability (HR and various environmental conditions. This paper proposed a fault risk assessment method for an underwater vehicle steering system based on virtual prototyping and Monte Carlo simulation. A virtual steering system prototype was established and validated to rectify a lack of historic fault data. Fault injection and simulation were conducted to acquire fault simulation data. A Monte Carlo simulation was adopted that integrated randomness due to the human operator and environment. Randomness and uncertainty of the human, machine and environment were integrated in the method to obtain a probabilistic risk indicator. To verify the proposed method, a case of stuck rudder fault (SRF risk assessment was studied. This method may provide a novel solution for fault risk assessment of a vehicle or other general HME system.

Operations management system advanced automation: Fault detection isolation and recovery prototyping

Science.gov (United States)

Hanson, Matt

1990-01-01

The purpose of this project is to address the global fault detection, isolation and recovery (FDIR) requirements for Operation's Management System (OMS) automation within the Space Station Freedom program. This shall be accomplished by developing a selected FDIR prototype for the Space Station Freedom distributed processing systems. The prototype shall be based on advanced automation methodologies in addition to traditional software methods to meet the requirements for automation. A secondary objective is to expand the scope of the prototyping to encompass multiple aspects of station-wide fault management (SWFM) as discussed in OMS requirements documentation.

Prototype of an expert system to help nuclide identification in gamma spectrum analysis

International Nuclear Information System (INIS)

Jayanthi, Kasi Annapurna; Corcuera, Raquel Paviotti; Oliveira, Gina Maira B.

1995-01-01

This report describes the development and use of IDENT, prototype of an expert system that helps the researcher to identify radionuclides in gamma-ray spectroscopy. Normally the method adopted by the researcher is iterative, time consuming and becomes complicated in the analysis of large and complex gamma-ray spectra. The present expert system is based on the knowledge transmitted by expert and specialists in this area and the results show that it is helpful for researches who perform nuclide identification through gamma-ray spectroscopy. The gamma-ray spectrum of a material sample with about 140 peaks would take about a week or two be analysed by a specialist. The same task can be done in a few minutes using this expert system. (author). 14 refs., 2 figs

Rapid Prototyping with Fourth Generation Systems - an Empirical Study

DEFF Research Database (Denmark)

Grønbæk, Kaj

1989-01-01

Discusses experiences on the development and use of horizontal and vertical prototypes. Explains the difference. Resolves that horizontal prototypes can be developed with 'little effort', but end users are reluctant to become involved in the development process. Contrastingly resolves that vertical...... prototypes appear to stimulate constructive response. Reasons that developers should be aware of the tacit knowledge which plays an important part in users' work practices and should be involved early in the development process. Proposes three techniques to meet the requirements – participation, simulation...

Knowledge-based approach to video content classification

Science.gov (United States)

Chen, Yu; Wong, Edward K.

2001-01-01

A framework for video content classification using a knowledge-based approach is herein proposed. This approach is motivated by the fact that videos are rich in semantic contents, which can best be interpreted and analyzed by human experts. We demonstrate the concept by implementing a prototype video classification system using the rule-based programming language CLIPS 6.05. Knowledge for video classification is encoded as a set of rules in the rule base. The left-hand-sides of rules contain high level and low level features, while the right-hand-sides of rules contain intermediate results or conclusions. Our current implementation includes features computed from motion, color, and text extracted from video frames. Our current rule set allows us to classify input video into one of five classes: news, weather, reporting, commercial, basketball and football. We use MYCIN's inexact reasoning method for combining evidences, and to handle the uncertainties in the features and in the classification results. We obtained good results in a preliminary experiment, and it demonstrated the validity of the proposed approach.

Conference on development of JAEA knowledge management system, 2010 (Conference report)

International Nuclear Information System (INIS)

Notoya, Shin; Sasao, Eiji; Ota, Kunio; Shimizu, Kazuhiko

2010-11-01

In March 2010, a prototype of 'next generation' knowledge management system (KMS) and a status report (CoolRep H22) synthesizing the R and D results were made publicly available at the conclusion of R and D for the first Midterm Plan (October 2005 to March 2010). This could further reinforce the technical knowledge base and thus enable the geological disposal project and associated safety regulations to be continuously supported. The conference on 'Development of JAEA Knowledge Management System, 2010' was held on 16th June 2010 in Tokyo, with main aims of introducing KMS and CoolRep H22 to broader stakeholders, promoting their understanding and having input from them for further improvement of KMS. This report compiles presentation materials and comments to KMS and CoolRep H22 from participants. (author)

Deep knowledge and knowledge compilation for dynamic systems

International Nuclear Information System (INIS)

Mizoguchi, Riichiro

1994-01-01

Expert systems are viewed as knowledge-based systems which efficiently solve real-world problems based on the expertise contained in their knowledge bases elicited from domain experts. Although such expert systems that depends on heuristics of domain experts have contributed to the current success, they are known to be brittle and hard to build. This paper is concerned with research on model-based diagnosis and knowledge compilation for dynamic systems conducted by the author's group to overcome these difficulties. Firstly, we summarize the advantages and shortcomings of expert systems. Secondly, deep knowledge and knowledge compilation is discussed. Then, latest results of our research on model-based diagnosis is overviewed. The future direction of knowledge base technology research is also discussed. (author)

Fuzzy Dynamic Discrimination Algorithms for Distributed Knowledge Management Systems

Directory of Open Access Journals (Sweden)

Vasile MAZILESCU

2010-12-01

Full Text Available A reduction of the algorithmic complexity of the fuzzy inference engine has the following property: the inputs (the fuzzy rules and the fuzzy facts can be divided in two parts, one being relatively constant for a long a time (the fuzzy rule or the knowledge model when it is compared to the second part (the fuzzy facts for every inference cycle. The occurrence of certain transformations over the constant part makes sense, in order to decrease the solution procurement time, in the case that the second part varies, but it is known at certain moments in time. The transformations attained in advance are called pre-processing or knowledge compilation. The use of variables in a Business Rule Management System knowledge representation allows factorising knowledge, like in classical knowledge based systems. The language of the first-degree predicates facilitates the formulation of complex knowledge in a rigorous way, imposing appropriate reasoning techniques. It is, thus, necessary to define the description method of fuzzy knowledge, to justify the knowledge exploiting efficiency when the compiling technique is used, to present the inference engine and highlight the functional features of the pattern matching and the state space processes. This paper presents the main results of our project PR356 for designing a compiler for fuzzy knowledge, like Rete compiler, that comprises two main components: a static fuzzy discrimination structure (Fuzzy Unification Tree and the Fuzzy Variables Linking Network. There are also presented the features of the elementary pattern matching process that is based on the compiled structure of fuzzy knowledge. We developed fuzzy discrimination algorithms for Distributed Knowledge Management Systems (DKMSs. The implementations have been elaborated in a prototype system FRCOM (Fuzzy Rule COMpiler.

A knowledge-based diagnosis system for welding machine problem solving

International Nuclear Information System (INIS)

Bonnieres, P. de; Boutes, J.L.; Calas, M.A.; Para, S.

1986-06-01

This paper presents a knowledge-based diagnosis system which can be a valuable aid in resolving malfunctions and failures encountered using the automatic hot-wire TIG weld cladding process. This knowledge-based system is currently under evaluation by welding operators at the Framatome heavy fabricating facility. Extension to other welding processes is being considered

A first-principles generic methodology for representing the knowledge base of a process diagnostic expert system

International Nuclear Information System (INIS)

Reifman, J.; Briggs, L.L.; Wei, T.Y.C.

1990-01-01

In this paper we present a methodology for identifying faulty component candidates of process malfunctions through basic physical principles of conservation, functional classification of components and information from the process schematics. The basic principles of macroscopic balance of mass, momentum and energy in thermal hydraulic control volumes are applied in a novel approach to incorporate deep knowledge into the knowledge base. Additional deep knowledge is incorporated through the functional classification of process components according to their influence in disturbing the macroscopic balance equations. Information from the process schematics is applied to identify the faulty component candidates after the type of imbalance in the control volumes is matched against the functional classification of the components. Except for the information from the process schematics, this approach is completely general and independent of the process under consideration. The use of basic first-principles, which are physically correct, and the process-independent architecture of the diagnosis procedure allow for the verification and validation of the system. A prototype process diagnosis expert system is developed and a test problem is presented to identify faulty component candidates in the presence of a single failure in a hypothetical balance of plant of a liquid metal nuclear reactor plant

Human Factors and Technical Considerations for a Computerized Operator Support System Prototype

Energy Technology Data Exchange (ETDEWEB)

Ulrich, Thomas Anthony [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lew, Roger Thomas [Idaho National Lab. (INL), Idaho Falls, ID (United States); Medema, Heather Dawne [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boring, Ronald Laurids [Idaho National Lab. (INL), Idaho Falls, ID (United States); Thomas, Kenneth David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-09-01

A prototype computerized operator support system (COSS) has been developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based on four underlying elements consisting of a digital alarm system, computer-based procedures, PI&D system representations, and a recommender module for mitigation actions. At this point, the prototype simulates an interface to a sensor validation module and a fault diagnosis module. These two modules will be fully integrated in the next version of the prototype. The initial version of the prototype is now operational at the Idaho National Laboratory using the U.S. Department of Energy’s Light Water Reactor Sustainability (LWRS) Human Systems Simulation Laboratory (HSSL). The HSSL is a full-scope, full-scale glass top simulator capable of simulating existing and future nuclear power plant main control rooms. The COSS is interfaced to the Generic Pressurized Water Reactor (gPWR) simulator with industry-typical control board layouts. The glass top panels display realistic images of the control boards that can be operated by touch gestures. A section of the simulated control board was dedicated to the COSS human-system interface (HSI), which resulted in a seamless integration of the COSS into the normal control room environment. A COSS demonstration scenario has been developed for the prototype involving the Chemical & Volume Control System (CVCS) of the PWR simulator. It involves a primary coolant leak outside of containment that would require tripping the reactor if not mitigated in a very short timeframe. The COSS prototype presents a series of operator screens that provide the needed information and soft controls to successfully mitigate the event.

Design of the ILC Prototype FONT4 Digital Intra-Train Beam-Based Feedback System

International Nuclear Information System (INIS)

Burrows, P.; Queen Mary, U. of London; Christian, G.B.; Hartin, A.F.; Dabiri Khah, H.; White, G.R.; Oxford U.; Clarke, C.C.; Perry, C.; Oxford Instruments; Kalinin, A.; Daresbury; McCormick, D.J.; Molloy, S.; Ross, M.C.; SLAC

2007-01-01

We present the design of the FONT4 digital intra-train beam position feedback system prototype and preliminary results of initial beam tests at the Accelerator Test Facility (ATF) at KEK. The feedback system incorporates a fast analogue beam position monitor (BPM) front-end signal processor, a digital feedback board, and a kicker driver amplifier. The short bunchtrain, comprising 3 electron bunches separated by c. 150ns, in the ATF extraction line was used to test components of the prototype feedback system

Knowledge-based operation guidance system for nuclear power plants based on generic task methodology

International Nuclear Information System (INIS)

Yamada, Naoyuki; Chandrasekaran, B.; Bhatnager, R.

1989-01-01

A knowledge-based system for operation guidance of nuclear power plants is proposed. The Dynamic Procedure Management System (DPMS) is designed and developed to assist human operators interactively by selecting and modifying predefined operation procedures in a dynamic situation. Unlike most operation guidance systems, DPMS has been built based on Generic Task Methodology, which makes the overall framework of the system perspicuous and also lets domain knowledge be represented in a natural way. This paper describes the organization of the system, the definition of each task, and the form and organization of knowledge, followed by an application example. (author)

A GUI Prototype for the Framework of Criminal Judicial Reasoning System

OpenAIRE

Thammaboosadee, Sotarat; Silparcha, Udom

2009-01-01

This paper proposed a developed graphical user interface (GUI) prototype, whichis supported by the framework of data mining techniques-based criminal judicial reasoning system.The GUI sequences of the prototype are satisfied with criminal judicial procedure in civil lawsystem. Initially, user must build the model by input the existing incident and specifying the detail ofobjects, elements of crime, charge and judgment. After enough training, the prototype will be readyto determine judgments f...

A prototype expert system 'SMART' for water chemistry control in reactor water circuits

International Nuclear Information System (INIS)

Rangarajan, S.; Narasimhan, S.V.

1998-01-01

The operational safety of a power plant depends mainly on the material compatibility of the system materials with the environment. However, for an operating plant, the material is almost fixed and hence one can improve the safety by controlling the surrounding environment. From the economy point of view, the plant availability factor as well as plant life extension (PLEX) are important considerations and these necessitate a systematic approach for continuous parametric monitoring, rapid data analysis and diagnosis for controlling the water chemistry regime. A prototype expert system 'SMART' was developed in BASIC language. The expert system consists of four modules. The DATA HANDLER module controls all the data handling functions and graphical display of the data parameters. It also generates weekly and monthly reports of the water chemistry data. The DATA INTERPRETER module compares the experimental data with the theoretically calculated values and predicts the presence of impurity ingress in the system. The CHEMISTRY EXPERT contains the knowledge base about the various sub-systems. All the water chemistry specifications are translated in the form of IF... THEN.. rules and are stored in this module. The expert system inferences with the forward chain reasoning mechanism to identify the diagnostic parameters by consulting the knowledge base and applying the appropriate rules. The ACTION EXPERT module collects all the diagnostic parameters and suggests the operator, the remedial actions/counter measures that should be taken immediately. This rule based system can be expanded to accommodate different water chemistry regimes. (author)

A Computuerized Operator Support System Prototype

Energy Technology Data Exchange (ETDEWEB)

Thomas, Ken [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boring, Ronald [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lew, Roger [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ulrich, Tom [Idaho National Lab. (INL), Idaho Falls, ID (United States); Villim, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2013-11-01

A report was published by the Idaho National Laboratory in September of 2012, entitled Design to Achieve Fault Tolerance and Resilience, which described the benefits of automating operator actions for transients. The report identified situations in which providing additional automation in lieu of operator actions would be advantageous. It recognized that managing certain plant upsets is sometimes limited by the operator’s ability to quickly diagnose the fault and to take the needed actions in the time available. Undoubtedly, technology is underutilized in the nuclear power industry for operator assistance during plant faults and operating transients. In contrast, other industry sectors have amply demonstrated that various forms of operator advisory systems can enhance operator performance while maintaining the role and responsibility of the operator as the independent and ultimate decision-maker. A computerized operator support system (COSS) is proposed for use in nuclear power plants to assist control room operators in addressing time-critical plant upsets. A COSS is a collection of technologies to assist operators in monitoring overall plant performance and making timely, informed decisions on appropriate control actions for the projected plant condition. The COSS does not supplant the role of the operator, but rather provides rapid assessments, computations, and recommendations to reduce workload and augment operator judgment and decision-making during fast-moving, complex events. This project proposes a general model for a control room COSS that addresses a sequence of general tasks required to manage any plant upset: detection, validation, diagnosis, recommendation, monitoring, and recovery. The model serves as a framework for assembling a set of technologies that can be interrelated to assist with each of these tasks. A prototype COSS has been developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based

A Computuerized Operator Support System Prototype

Energy Technology Data Exchange (ETDEWEB)

Thomas, Ken [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boring, Ronald [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lew, Roger [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ulrich, Tom [Idaho National Lab. (INL), Idaho Falls, ID (United States); Villim, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2013-08-01

A report was published by the Idaho National Laboratory in September of 2012, entitled Design to Achieve Fault Tolerance and Resilience, which described the benefits of automating operator actions for transients. The report identified situations in which providing additional automation in lieu of operator actions would be advantageous. It recognized that managing certain plant upsets is sometimes limited by the operator’s ability to quickly diagnose the fault and to take the needed actions in the time available. Undoubtedly, technology is underutilized in the nuclear power industry for operator assistance during plant faults and operating transients. In contrast, other industry sectors have amply demonstrated that various forms of operator advisory systems can enhance operator performance while maintaining the role and responsibility of the operator as the independent and ultimate decision-maker. A computerized operator support system (COSS) is proposed for use in nuclear power plants to assist control room operators in addressing time-critical plant upsets. A COSS is a collection of technologies to assist operators in monitoring overall plant performance and making timely, informed decisions on appropriate control actions for the projected plant condition. The COSS does not supplant the role of the operator, but rather provides rapid assessments, computations, and recommendations to reduce workload and augment operator judgment and decision-making during fast-moving, complex events. This project proposes a general model for a control room COSS that addresses a sequence of general tasks required to manage any plant upset: detection, validation, diagnosis, recommendation, monitoring, and recovery. The model serves as a framework for assembling a set of technologies that can be interrelated to assist with each of these tasks. A prototype COSS has been developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based

A second generation 50 Mbps VLSI level zero processing system prototype

Science.gov (United States)

Harris, Jonathan C.; Shi, Jeff; Speciale, Nick; Bennett, Toby

1994-01-01

Level Zero Processing (LZP) generally refers to telemetry data processing functions performed at ground facilities to remove all communication artifacts from instrument data. These functions typically include frame synchronization, error detection and correction, packet reassembly and sorting, playback reversal, merging, time-ordering, overlap deletion, and production of annotated data sets. The Data Systems Technologies Division (DSTD) at Goddard Space Flight Center (GSFC) has been developing high-performance Very Large Scale Integration Level Zero Processing Systems (VLSI LZPS) since 1989. The first VLSI LZPS prototype demonstrated 20 Megabits per second (Mbp's) capability in 1992. With a new generation of high-density Application-specific Integrated Circuits (ASIC) and a Mass Storage System (MSS) based on the High-performance Parallel Peripheral Interface (HiPPI), a second prototype has been built that achieves full 50 Mbp's performance. This paper describes the second generation LZPS prototype based upon VLSI technologies.

Modeling and prototyping of biometric systems using dataflow programming

Science.gov (United States)

Minakova, N.; Petrov, I.

2018-01-01

The development of biometric systems is one of the labor-intensive processes. Therefore, the creation and analysis of approaches and techniques is an urgent task at present. This article presents a technique of modeling and prototyping biometric systems based on dataflow programming. The technique includes three main stages: the development of functional blocks, the creation of a dataflow graph and the generation of a prototype. A specially developed software modeling environment that implements this technique is described. As an example of the use of this technique, an example of the implementation of the iris localization subsystem is demonstrated. A variant of modification of dataflow programming is suggested to solve the problem related to the undefined order of block activation. The main advantage of the presented technique is the ability to visually display and design the model of the biometric system, the rapid creation of a working prototype and the reuse of the previously developed functional blocks.

Development of a knowledge-based information management system for plant maintenance

International Nuclear Information System (INIS)

Yim, Hyung Sang; Park, Young Jae; Lee, Sang Min; Choi, Jae Boong; Kim, Young Jin; Roh, Eun Chul; Lee, Byung Ine

2003-01-01

Recently, the importance of Plant Maintenance(PM) was highly raised to provide efficient plant operation which highly affects the productivity. For this reason, a number of engineering methodologies, such as Risk-Based Inspection(RBI), Fitness For Service guidelines(FFS), Plant Lifecycle Management(PLM), have been applied to improve the plant operation efficiency. Also, a network-based business operation system, which is called ERP(Enterprise Resource Planning), has been introduced in the field of plant maintenance. However, there was no attempt to connect engineering methodologies to the ERP PM system. In this paper, a knowledge-based information system for the plant operation of steel making company has been proposed. This system, which is named as K-VRS(Knowledge-based Virtual Reality System), provides a connection between ERP plant maintenance module and knowledge-based engineering methodologies, and thus, enables network-based highly effective plant maintenance process. The developed system is expected to play a great role for more efficient and safer plant maintenance

Development of a knowledge-based information management system for plant maintenance

Energy Technology Data Exchange (ETDEWEB)

Yim, Hyung Sang; Park, Young Jae; Lee, Sang Min; Choi, Jae Boong; Kim, Young Jin [Sungkyunkwan Univ., Seoul (Korea, Republic of); Roh, Eun Chul; Lee, Byung Ine [Pohang Iron and Steel Company, Pohang (Korea, Republic of)

2003-07-01

Recently, the importance of Plant Maintenance(PM) was highly raised to provide efficient plant operation which highly affects the productivity. For this reason, a number of engineering methodologies, such as Risk-Based Inspection(RBI), Fitness For Service guidelines(FFS), Plant Lifecycle Management(PLM), have been applied to improve the plant operation efficiency. Also, a network-based business operation system, which is called ERP(Enterprise Resource Planning), has been introduced in the field of plant maintenance. However, there was no attempt to connect engineering methodologies to the ERP PM system. In this paper, a knowledge-based information system for the plant operation of steel making company has been proposed. This system, which is named as K-VRS(Knowledge-based Virtual Reality System), provides a connection between ERP plant maintenance module and knowledge-based engineering methodologies, and thus, enables network-based highly effective plant maintenance process. The developed system is expected to play a great role for more efficient and safer plant maintenance.

The Prototype of Real-time Object Detection System Based on SMS

Directory of Open Access Journals (Sweden)

M. Hana Mirza

2010-08-01

Full Text Available The powerful algorithm to detect object movement in development of room monitoring system is very urgent. The commond algorithm needs complex computation. In this research, the prototype of real-time object detection system using simple algorithm is developed, i.e. using the determination of the max noise/pixel value and the tolerance threshold of image accurately, and then the system automatically send a SMS (short message services to user when the object movement is detected. The developed prototype used a Logitech QuickCam webcam, a Siemens C45 mobile phone and a data cable, and the Borland Delphi 7 with additional components and Serial PortNG Tvideo as system software. The application also includes a database to store the captured images whenever object movement is detected. The test results by varying conditions of light intensities using a 5-watt light bulb, fluorescent lamp 20 and 40 watts indicate that the application is able to automatically detect the presence of moving objects with 100% success rate. The success rate is strongly influenced by the determination of the max noise/pixel value and the tolerance threshold during system configuration. This application is also capable of sending SMS automatically when the system detects a moving object with an average time of 8.35 seconds.

Knowledge based systems for intelligent robotics

Science.gov (United States)

Rajaram, N. S.

1982-01-01

It is pointed out that the construction of large space platforms, such as space stations, has to be carried out in the outer space environment. As it is extremely expensive to support human workers in space for large periods, the only feasible solution appears to be related to the development and deployment of highly capable robots for most of the tasks. Robots for space applications will have to possess characteristics which are very different from those needed by robots in industry. The present investigation is concerned with the needs of space robotics and the technologies which can be of assistance to meet these needs, giving particular attention to knowledge bases. 'Intelligent' robots are required for the solution of arising problems. The collection of facts and rules needed for accomplishing such solutions form the 'knowledge base' of the system.

The representation of knowledge within model-based control systems

International Nuclear Information System (INIS)

Weygand, D.P.; Koul, R.

1987-01-01

The ability to represent knowledge is often considered essential to build systems with reasoning capabilities. In computer science, a good solution often depends on a good representation. The first step in development of most computer applications is selection of a representation for the input, output, and intermediate results that the program will operate upon. For applications in artificial intelligence, this initial choice of representation is especially important. This is because the possible representational paradigms are diverse and the forcing criteria for the choice are usually not clear in the beginning. Yet, the consequences of an inadequate choice can be devastating in the later state of a project if it is discovered that critical information cannot be encoded within the chosen representational paradigm. Problems arise when designing representational systems to support any kind of Knowledge-Base System, that is a computer system that uses knowledge to perform some task. The general case of knowledge-based systems can be thought of as reasoning agents applying knowledge to achieve goals. Artificial Intelligence (AI) research involves building computer systems to perform tasks of perception and reasoning, as well as storage and retrieval of data. The problem of automatically perceiving large patterns in data is a perceptual task that begins to be important for many expert systems applications. Most of AI research assumes that what needs to be represented is known a priori; an AI researcher's job is just figuring out how to encode the information in the system's data structure and procedures. 10 refs

Rapid Prototyping of Standard Compliant Visible Light Communications System

OpenAIRE

Gavrincea, Ciprian; Baranda, Jorge; Henarejos, Pol

2014-01-01

This article describes the implementation of a prototype visible light communications system based on the IEEE 802.15.7 standard using low-cost commercial off-the-shelf analog devices. The aim of this article is to show that this standard provides a framework that could promote the introduction of applications into the market. Thus, these specifications could be further developed, reducing the gap between the industry and research communities. The implemented prototype makes use of software d...

Analysis, Simulation, and Verification of Knowledge-Based, Rule-Based, and Expert Systems

Science.gov (United States)

Hinchey, Mike; Rash, James; Erickson, John; Gracanin, Denis; Rouff, Chris

2010-01-01

Mathematically sound techniques are used to view a knowledge-based system (KBS) as a set of processes executing in parallel and being enabled in response to specific rules being fired. The set of processes can be manipulated, examined, analyzed, and used in a simulation. The tool that embodies this technology may warn developers of errors in their rules, but may also highlight rules (or sets of rules) in the system that are underspecified (or overspecified) and need to be corrected for the KBS to operate as intended. The rules embodied in a KBS specify the allowed situations, events, and/or results of the system they describe. In that sense, they provide a very abstract specification of a system. The system is implemented through the combination of the system specification together with an appropriate inference engine, independent of the algorithm used in that inference engine. Viewing the rule base as a major component of the specification, and choosing an appropriate specification notation to represent it, reveals how additional power can be derived from an approach to the knowledge-base system that involves analysis, simulation, and verification. This innovative approach requires no special knowledge of the rules, and allows a general approach where standardized analysis, verification, simulation, and model checking techniques can be applied to the KBS.

MPACT Fast Neutron Multiplicity System Prototype Development

Energy Technology Data Exchange (ETDEWEB)

D.L. Chichester; S.A. Pozzi; J.L. Dolan; M.T. Kinlaw; S.J. Thompson; A.C. Kaplan; M. Flaska; A. Enqvist; J.T. Johnson; S.M. Watson

2013-09-01

This document serves as both an FY2103 End-of-Year and End-of-Project report on efforts that resulted in the design of a prototype fast neutron multiplicity counter leveraged upon the findings of previous project efforts. The prototype design includes 32 liquid scintillator detectors with cubic volumes 7.62 cm in dimension configured into 4 stacked rings of 8 detectors. Detector signal collection for the system is handled with a pair of Struck Innovative Systeme 16-channel digitizers controlled by in-house developed software with built-in multiplicity analysis algorithms. Initial testing and familiarization of the currently obtained prototype components is underway, however full prototype construction is required for further optimization. Monte Carlo models of the prototype system were performed to estimate die-away and efficiency values. Analysis of these models resulted in the development of a software package capable of determining the effects of nearest-neighbor rejection methods for elimination of detector cross talk. A parameter study was performed using previously developed analytical methods for the estimation of assay mass variance for use as a figure-of-merit for system performance. A software package was developed to automate these calculations and ensure accuracy. The results of the parameter study show that the prototype fast neutron multiplicity counter design is very nearly optimized under the restraints of the parameter space.

Antiviral Information Management System (AIMS): a prototype for operational innovation in drug development.

Science.gov (United States)

Jadhav, Pravin R; Neal, Lauren; Florian, Jeff; Chen, Ying; Naeger, Lisa; Robertson, Sarah; Soon, Guoxing; Birnkrant, Debra

2010-09-01

This article presents a prototype for an operational innovation in knowledge management (KM). These operational innovations are geared toward managing knowledge efficiently and accessing all available information by embracing advances in bioinformatics and allied fields. The specific components of the proposed KM system are (1) a database to archive hepatitis C virus (HCV) treatment data in a structured format and retrieve information in a query-capable manner and (2) an automated analysis tool to inform trial design elements for HCV drug development. The proposed framework is intended to benefit drug development by increasing efficiency of dose selection and improving the consistency of advice from US Food and Drug Administration (FDA). It is also hoped that the framework will encourage collaboration among FDA, industry, and academic scientists to guide the HCV drug development process using model-based quantitative analysis techniques.

Laboratory Scale Prototype of a Low-Speed Electrodynamic Levitation System Based on a Halbach Magnet Array

Science.gov (United States)

Iniguez, J.; Raposo, V.

2009-01-01

In this paper we analyse the behaviour of a small-scale model of a magnetic levitation system based on the Inductrack concept. Drag and lift forces acting on our prototype, moving above a continuous copper track, are studied analytically following a simple low-speed approach. The experimental results are in good agreement with the theoretical…

Architectural Prototyping in Industrial Practice

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak; Hansen, Klaus Marius

2008-01-01

Architectural prototyping is the process of using executable code to investigate stakeholders’ software architecture concerns with respect to a system under development. Previous work has established this as a useful and cost-effective way of exploration and learning of the design space of a system......, in addressing issues regarding quality attributes, in addressing architectural risks, and in addressing the problem of knowledge transfer and conformance. Little work has been reported so far on the actual industrial use of architectural prototyping. In this paper, we report from an ethnographical study...... and focus group involving architects from four companies in which we have focused on architectural prototypes. Our findings conclude that architectural prototypes play an important role in resolving problems experimentally, but less so in exploring alternative solutions. Furthermore, architectural...

A prototype distributed object-oriented architecture for image-based automatic laser alignment

International Nuclear Information System (INIS)

Stout, E.A.; Kamm, V.J.M.; Spann, J.M.; Van Arsdall, P.J.

1996-01-01

Designing a computer control system for the National Ignition Facility (NIF) is a complex undertaking because of the system's large size and its distributed nature. The controls team is addressing that complexity by adopting the object-oriented programming paradigm, designing reusable software frameworks, and using the Common Object Request Broker Architecture (CORBA) for distribution. A prototype system for image-based automatic laser alignment has been developed to evaluate and gain experience with CORBA and OOP in a small distributed system. The prototype is also important in evaluating alignment concepts, image processing techniques, speed and accuracy of automatic alignment objectives for the NIF, and control hardware for aligment devices. The prototype system has met its inital objectives and provides a basis for continued development

A prototype table-top inverse-geometry volumetric CT system

International Nuclear Information System (INIS)

Schmidt, Taly Gilat; Star-Lack, Josh; Bennett, N. Robert; Mazin, Samuel R.; Solomon, Edward G.; Fahrig, Rebecca; Pelc, Norbert J.

2006-01-01

A table-top volumetric CT system has been implemented that is able to image a 5-cm-thick volume in one circular scan with no cone-beam artifacts. The prototype inverse-geometry CT (IGCT) scanner consists of a large-area, scanned x-ray source and a detector array that is smaller in the transverse direction. The IGCT geometry provides sufficient volumetric sampling because the source and detector have the same axial, or slice direction, extent. This paper describes the implementation of the table-top IGCT scanner, which is based on the NexRay Scanning-Beam Digital X-ray system (NexRay, Inc., Los Gatos, CA) and an investigation of the system performance. The alignment and flat-field calibration procedures are described, along with a summary of the reconstruction algorithm. The resolution and noise performance of the prototype IGCT system are studied through experiments and further supported by analytical predictions and simulations. To study the presence of cone-beam artifacts, a ''Defrise'' phantom was scanned on both the prototype IGCT scanner and a micro CT system with a ±5 deg.cone angle for a 4.5-cm volume thickness. Images of inner ear specimens are presented and compared to those from clinical CT systems. Results showed that the prototype IGCT system has a 0.25-mm isotropic resolution and that noise comparable to that from a clinical scanner with equivalent spatial resolution is achievable. The measured MTF and noise values agreed reasonably well with theoretical predictions and computer simulations. The IGCT system was able to faithfully reconstruct the laminated pattern of the Defrise phantom while the micro CT system suffered severe cone-beam artifacts for the same object. The inner ear acquisition verified that the IGCT system can image a complex anatomical object, and the resulting images exhibited more high-resolution details than the clinical CT acquisition. Overall, the successful implementation of the prototype system supports the IGCT concept for

An Expert System-Based Approach to Hospitality Company Diagnosis

OpenAIRE

Balfe, Andrew; O'Connor, Peter; McDonnell, Ciaran

1994-01-01

This paper describes the development of a prototype Expert System-based Analysis and Diagnostic (ESAD) package for the Hotel and Catering Industry. This computerised tool aids the hospitality manager in methodically scrutinising the hotel unit and environment, combining key information with systematic reasoning. The system searches through its extensive knowledge base, investigating complicated relationships. The number of possibilities considered is increased which will broaden the depth and...

A Prototype Symbolic Model of Canonical Functional Neuroanatomy of the Motor System

Science.gov (United States)

Rubin, Daniel L.; Halle, Michael; Musen, Mark; Kikinis, Ron

2008-01-01

Recent advances in bioinformatics have opened entire new avenues for organizing, integrating and retrieving neuroscientific data, in a digital, machine-processable format, which can be at the same time understood by humans, using ontological, symbolic data representations. Declarative information stored in ontological format can be perused and maintained by domain experts, interpreted by machines, and serve as basis for a multitude of decision-support, computerized simulation, data mining, and teaching applications. We have developed a prototype symbolic model of canonical neuroanatomy of the motor system. Our symbolic model is intended to support symbolic lookup, logical inference and mathematical modeling by integrating descriptive, qualitative and quantitative functional neuroanatomical knowledge. Furthermore, we show how our approach can be extended to modeling impaired brain connectivity in disease states, such as common movement disorders. In developing our ontology, we adopted a disciplined modeling approach, relying on a set of declared principles, a high-level schema, Aristotelian definitions, and a frame-based authoring system. These features, along with the use of the Unified Medical Language System (UMLS) vocabulary, enable the alignment of our functional ontology with an existing comprehensive ontology of human anatomy, and thus allow for combining the structural and functional views of neuroanatomy for clinical decision support and neuroanatomy teaching applications. Although the scope of our current prototype ontology is limited to a particular functional system in the brain, it may be possible to adapt this approach for modeling other brain functional systems as well. PMID:18164666

A diagnostic expert system for NPP based on hybrid knowledge approach

International Nuclear Information System (INIS)

Yang, Joon On; Chang, Soon Heung

1989-01-01

This paper describes a diagnostic expert system, HYPOSS (Hybrid Knowledge Based Plant Operation Supporting System), which has been developed to support operators' decision making during the transients of nuclear power plant. HYPOSS adopts the hybrid knowledge approach which combines shallow and deep knowledge to couple the merits of both approaches. In HYPOSS, four types of knowledge are used according to the steps of diagnosis procedure: structural, functional, behavioral and heuristic knowledge. The structural and functional knowledge is represented by three fundamental primitives and five types of functions respectively. The behavioral knowledge is represented using constraints. The inference procedure is based on the human problem solving behavior modeled in HYPOSS. For the validation of HYPOSS, several tests have been performed based on the data produced by a plant simulator. The results of validation studies showed a good applicability of HYPOSS to the anomaly diagnosis of nuclear power plant

Using Knowledge-Based Systems to Support Learning of Organizational Knowledge: A Case Study

Science.gov (United States)

Cooper, Lynne P.; Nash, Rebecca L.; Phan, Tu-Anh T.; Bailey, Teresa R.

2003-01-01

This paper describes the deployment of a knowledge system to support learning of organizational knowledge at the Jet Propulsion Laboratory (JPL), a US national research laboratory whose mission is planetary exploration and to 'do what no one has done before.' Data collected over 19 weeks of operation were used to assess system performance with respect to design considerations, participation, effectiveness of communication mechanisms, and individual-based learning. These results are discussed in the context of organizational learning research and implications for practice.

Knowledge based systems advanced concepts, techniques and applications

CERN Document Server

1997-01-01

The field of knowledge-based systems (KBS) has expanded enormously during the last years, and many important techniques and tools are currently available. Applications of KBS range from medicine to engineering and aerospace.This book provides a selected set of state-of-the-art contributions that present advanced techniques, tools and applications. These contributions have been prepared by a group of eminent researchers and professionals in the field.The theoretical topics covered include: knowledge acquisition, machine learning, genetic algorithms, knowledge management and processing under unc

Specifications and Prototype of the Knowledge Repository (V.3.0) and the Knowledge Mediator (V.3.0)

Science.gov (United States)

Andreou, Dimitris; Christophides, Vassilis; Flouris, Giorgos; Kotzinos, Dimitris; Pediaditis, Panagiotis; Tsialiamanis, Petros

2009-01-01

This deliverable reports the technical and research development performed until M36 (January 2009) within tasks T5.2 and T5.4 of WP5 in the KP-Lab project, per the latest Description of Work (DoW) 3.2 [DoW3.2]. The described components are included in the KP-Lab Semantic Web Knowledge Middleware (SWKM) Prototype Release 3.0 software that takes…

New Prototype of Photovoltaic Solar Tracker Based on Arduino

Directory of Open Access Journals (Sweden)

Carlos Morón

2017-08-01

Full Text Available The global increase in energy demand and exponential exhaustion of fossil recourses has favored the development of new systems of electricity production. Photovoltaic solar energy is undoubtedly one that has the highest application in housings, due to its simplicity and easy implementation. In this work, a new prototype of photovoltaic solar tracker with Arduino platform was developed. Feedback control system that allows carrying out solar tracking with two axes using a stepper motor and linear actuator was established through an electronic circuit based on photodiodes. Moreover, real construction of the prototype was carried out, where the effectiveness of the design and its capacity to draw a maximum benefit of an incident radiation can be observed, placing the panel perpendicularly to the received energy and improving its performance for its application in future installations in housings. Results obtained from the comparison between the developed prototype and a static panel oriented according to the latitude of the area, show about 18% energy gain.

A Rapid Prototyping Environment for Wireless Communication Embedded Systems

Directory of Open Access Journals (Sweden)

Bryan A. Jones

2003-05-01

Full Text Available This paper introduces a rapid prototyping methodology which overcomes important barriers in the design and implementation of digital signal processing (DSP algorithms and systems on embedded hardware platforms, such as cellular phones. This paper describes rapid prototyping in terms of a simulation/prototype bridge and in terms of appropriate language design. The simulation/prototype bridge combines the strengths of simulation and of prototyping, allowing the designer to develop and evaluate next-generation communications systems, partly in simulation on a host computer and partly as a prototype on embedded hardware. Appropriate language design allows designers to express a communications system as a block diagram, in which each block represents an algorithm specified by a set of equations. Software tools developed for this paper implement both concepts, and have been successfully used in the development of a next-generation code division multiple access (CDMA cellular wireless communications system.

Participative knowledge management to empower manufacturing workers

DEFF Research Database (Denmark)

Campatelli, Gianni; Richter, Alexander; Stocker, Alexander

2016-01-01

skills. In this paper, the authors suggest a participative knowledge management approach to empower manufacturing workers. Starting from a comprehensive empirical analysis of the existing work practices in a manufacturing company, the authors have developed and validated a knowledge management system...... prototype. The prototype is aimed for training, problem solving, and facilitating the discovery, acquisition, and sharing of manufacturing knowledge. The conducted evaluation of the prototype indicates that workers' skills and level of work satisfaction will increase since the knowledge management system...

Prototype Software for Automated Structural Analysis of Systems

DEFF Research Database (Denmark)

Jørgensen, A.; Izadi-Zamanabadi, Roozbeh; Kristensen, M.

2004-01-01

In this paper we present a prototype software tool that is developed to analyse the structural model of automated systems in order to identify redundant information that is hence utilized for Fault detection and Isolation (FDI) purposes. The dedicated algorithms in this software tool use a tri......-partite graph that represents the structural model of the system. A component-based approach has been used to address issues such as system complexity and reconfigurability possibilities....

NASDA knowledge-based network planning system

Science.gov (United States)

Yamaya, K.; Fujiwara, M.; Kosugi, S.; Yambe, M.; Ohmori, M.

1993-01-01

One of the SODS (space operation and data system) sub-systems, NP (network planning) was the first expert system used by NASDA (national space development agency of Japan) for tracking and control of satellite. The major responsibilities of the NP system are: first, the allocation of network and satellite control resources and, second, the generation of the network operation plan data (NOP) used in automated control of the stations and control center facilities. Up to now, the first task of network resource scheduling was done by network operators. NP system automatically generates schedules using its knowledge base, which contains information on satellite orbits, station availability, which computer is dedicated to which satellite, and how many stations must be available for a particular satellite pass or a certain time period. The NP system is introduced.

Experimental Test and Simulations on a Linear Generator-Based Prototype of a Wave Energy Conversion System Designed with a Reliability-Oriented Approach

Directory of Open Access Journals (Sweden)

Valeria Boscaino

2017-01-01

Full Text Available In this paper, we propose a reliability-oriented design of a linear generator-based prototype of a wave energy conversion (WEC, useful for the production of hydrogen in a sheltered water area like Mediterranean Sea. The hydrogen production has been confirmed by a lot of experimental testing and simulations. The system design is aimed to enhance the robustness and reliability and is based on an analysis of the main WEC failures reported in literature. The results of this analysis led to some improvements that are applied to a WEC system prototype for hydrogen production and storage. The proposed WEC system includes the electrical linear generator, the power conversion system, and a sea-water electrolyzer. A modular architecture is conceived to provide ease of extension of the power capability of the marine plant. The experimental results developed on the permanent magnet linear electric generator have allowed identification of the stator winding typology and, consequently, ability to size the power electronics system. The produced hydrogen has supplied a low-power fuel cell stack directly connected to the hydrogen output from the electrolyzer. The small-scale prototype is designed to be installed, in the near future, into the Mediterranean Sea. As shown by experimental and simulation results, the small-scale prototype is suitable for hydrogen production and storage from sea water in this area.

Prototyping of concurrent control systems implemented in FPGA devices

CERN Document Server

Wiśniewski, Remigiusz

2017-01-01

This book focuses on prototyping aspects of concurrent control systems and their further implementation and partial reconfiguration in programmable devices. Further, it lays out a full prototyping flow for concurrent control systems. Based on a given primary specification, a system is described with an interpreted Petri net, which naturally reflects the concurrent and sequential relationships of the design. The book shows that, apart from the traditional option of static configuration of the entire system, the latest programmable devices (especially FPGAs) offer far more sophistication. Partial reconfiguration allows selected parts of the system to be replaced without having to reprogram the entire structure of the device. Approaches to dynamic and static partial reconfiguration of concurrent control systems are presented and described in detail.< The theoretical work is illustrated by examples drawn from various applications, with a milling machine and a traffic-light controller highlighted as representat...

A Prototype Lisp-Based Soft Real-Time Object-Oriented Graphical User Interface for Control System Development

Science.gov (United States)

Litt, Jonathan; Wong, Edmond; Simon, Donald L.

1994-01-01

A prototype Lisp-based soft real-time object-oriented Graphical User Interface for control system development is presented. The Graphical User Interface executes alongside a test system in laboratory conditions to permit observation of the closed loop operation through animation, graphics, and text. Since it must perform interactive graphics while updating the screen in real time, techniques are discussed which allow quick, efficient data processing and animation. Examples from an implementation are included to demonstrate some typical functionalities which allow the user to follow the control system's operation.

Actuator prototype system by voice commands using free software

Directory of Open Access Journals (Sweden)

Jaime Andrango

2016-06-01

Full Text Available This prototype system is a software application that through the use of techniques of digital signal processing, extracts information from the user's speech, which is then used to manage the on/off actuator on a peripheral computer when vowels are pronounced. The method applies spectral differences. The application uses the parallel port as actuator, with the information recorded in the memory address 378H. This prototype was developed using free software tools for its versatility and dynamism, and to allow other researchers to base on it for further studies.

Collaborative Prototyping

DEFF Research Database (Denmark)

Bogers, Marcel; Horst, Willem

2014-01-01

of the prototyping process, the actual prototype was used as a tool for communication or development, thus serving as a platform for the cross-fertilization of knowledge. In this way, collaborative prototyping leads to a better balance between functionality and usability; it translates usability problems into design......This paper presents an inductive study that shows how collaborative prototyping across functional, hierarchical, and organizational boundaries can improve the overall prototyping process. Our combined action research and case study approach provides new insights into how collaborative prototyping...... can provide a platform for prototype-driven problem solving in early new product development (NPD). Our findings have important implications for how to facilitate multistakeholder collaboration in prototyping and problem solving, and more generally for how to organize collaborative and open innovation...

Prototype system for proton beam range measurement based on gamma electron vertex imaging

Energy Technology Data Exchange (ETDEWEB)

Lee, Han Rim [Neutron Utilization Technology Division, Korea Atomic Energy Research Institute, 111, Daedeok-daero 989beon-gil, Yuseong-gu, Daejeon 34057 (Korea, Republic of); Kim, Sung Hun; Park, Jong Hoon [Department of Nuclear Engineering, Hanyang University, Seongdong-gu, Seoul 04763 (Korea, Republic of); Jung, Won Gyun [Heavy-ion Clinical Research Division, Korean Institute of Radiological & Medical Sciences, Seoul 01812 (Korea, Republic of); Lim, Hansang [Department of Electronics Convergence Engineering, Kwangwoon University, Seoul 01897 (Korea, Republic of); Kim, Chan Hyeong, E-mail: chkim@hanyang.ac.kr [Department of Nuclear Engineering, Hanyang University, Seongdong-gu, Seoul 04763 (Korea, Republic of)

2017-06-11

In proton therapy, for both therapeutic effectiveness and patient safety, it is very important to accurately measure the proton dose distribution, especially the range of the proton beam. For this purpose, recently we proposed a new imaging method named gamma electron vertex imaging (GEVI), in which the prompt gammas emitting from the nuclear reactions of the proton beam in the patient are converted to electrons, and then the converted electrons are tracked to determine the vertices of the prompt gammas, thereby producing a 2D image of the vertices. In the present study, we developed a prototype GEVI system, including dedicated signal processing and data acquisition systems, which consists of a beryllium plate (= electron converter) to convert the prompt gammas to electrons, two double-sided silicon strip detectors (= hodoscopes) to determine the trajectories of those converted electrons, and a plastic scintillation detector (= calorimeter) to measure their kinetic energies. The system uses triple coincidence logic and multiple energy windows to select only the events from prompt gammas. The detectors of the prototype GEVI system were evaluated for electronic noise level, energy resolution, and time resolution. Finally, the imaging capability of the GEVI system was tested by imaging a {sup 90}Sr beta source, a {sup 60}Co gamma source, and a 45-MeV proton beam in a PMMA phantom. The overall results of the present study generally show that the prototype GEVI system can image the vertices of the prompt gammas produced by the proton nuclear interactions.

Prototype and Evaluation of AutoHelp: A Case-based, Web-accessible Help Desk System for EOSDIS

Science.gov (United States)

Mitchell, Christine M.; Thurman, David A.

1999-01-01

AutoHelp is a case-based, Web-accessible help desk for users of the EOSDIS. Its uses a combination of advanced computer and Web technologies, knowledge-based systems tools, and cognitive engineering to offload the current, person-intensive, help desk facilities at the DAACs. As a case-based system, AutoHelp starts with an organized database of previous help requests (questions and answers) indexed by a hierarchical category structure that facilitates recognition by persons seeking assistance. As an initial proof-of-concept demonstration, a month of email help requests to the Goddard DAAC were analyzed and partially organized into help request cases. These cases were then categorized to create a preliminary case indexing system, or category structure. This category structure allows potential users to identify or recognize categories of questions, responses, and sample cases similar to their needs. Year one of this research project focused on the development of a technology demonstration. User assistance 'cases' are stored in an Oracle database in a combination of tables linking prototypical questions with responses and detailed examples from the email help requests analyzed to date. When a potential user accesses the AutoHelp system, a Web server provides a Java applet that displays the category structure of the help case base organized by the needs of previous users. When the user identifies or requests a particular type of assistance, the applet uses Java database connectivity (JDBC) software to access the database and extract the relevant cases. The demonstration will include an on-line presentation of how AutoHelp is currently structured. We will show how a user might request assistance via the Web interface and how the AutoHelp case base provides assistance. The presentation will describe the DAAC data collection, case definition, and organization to date, as well as the AutoHelp architecture. It will conclude with the year 2 proposal to more fully develop the

A knowledge-based system framework for real-time monitoring applications

International Nuclear Information System (INIS)

Heaberlin, J.O.; Robinson, A.H.

1989-01-01

A real-time environment presents a challenge for knowledge-based systems for process monitoring with on-line data acquisition in nuclear power plants. These applications are typically data intensive. This, coupled with the dynamic nature of events on which problematic decisions are based, requires the development of techniques fundamentally different from those generally employed. Traditional approaches involve knowledge management techniques developed for static data, the majority of which is elicited directly from the user in a consultation environment. Inference mechanisms are generally noninterruptible, requiring all appropriate rules to be fired before new data can be accommodated. As a result, traditional knowledge-based applications in real-time environments have inherent problems in dealing with the time dependence of both the data and the solution process. For example, potential problems include obtaining a correct solution too late to be of use or focusing computing resources on problems that no longer exist. A knowledge-based system framework, the real-time framework (RTF), has been developed that can accommodate the time dependencies and resource trade-offs required for real-time process monitoring applications. This framework provides real-time functionality by using generalized problem-solving goals and control strategies that are modifiable during system operation and capable of accommodating feedback for redirection of activities

A knowledge-based system for optimization of fuel reload configurations

International Nuclear Information System (INIS)

Galperin, A.; Kimhi, S.; Segev, M.

1989-01-01

The authors discuss a knowledge-based production system developed for generating optimal fuel reload configurations. The system was based on a heuristic search method and implemented in Common Lisp programming language. The knowledge base embodied the reactor physics, reactor operations, and a general approach to fuel management strategy. The data base included a description of the physical system involved, i.e., the core geometry and fuel storage. The fifth cycle of the Three Mile Island Unit 1 pressurized water reactor was chosen as a test case. Application of the system to the test case revealed a self-learning process by which a relatively large number of near-optimal configurations were discovered. Several selected solutions were subjected to detailed analysis and demonstrated excellent performance. To summarize, applicability of the proposed heuristic search method in the domain of nuclear fuel management was proved unequivocally

An approach to medical knowledge sharing in a hospital information system using MCLink.

Science.gov (United States)

Shibuya, Akiko; Inoue, Ryusuke; Nakayama, Masaharu; Kasahara, Shin; Maeda, Yukihiro; Umesato, Yoshimasa; Kondo, Yoshiaki

2013-08-01

Clinicians often need access to electronic information resources that answer questions that occur in daily clinical practice. This information generally comes from publicly available resources. However, clinicians also need knowledge on institution-specific information (e.g., institution-specific guidelines, choice of drug, choice of laboratory test, information on adverse events, and advice from professional colleagues). This information needs to be available in real time. This study characterizes these needs in order to build a prototype hospital information system (HIS) that can help clinicians get timely answers to questions. We previously designed medical knowledge units called Medical Cells (MCs). We developed a portal server of MCs that can create and store medical information such as institution-specific information. We then developed a prototype HIS that embeds MCs as links (MCLink); these links are based on specific terms (e.g., drug, laboratory test, and disease). This prototype HIS presents clinicians with institution-specific information. The HIS clients (e.g., clinicians, nurses, pharmacists, and laboratory technicians) can also create an MCLink in the HIS using the portal server in the hospital. The prototype HIS allowed efficient sharing and use of institution-specific information to clinicians at the point of care. This study included institution-specific information resources and advice from professional colleagues, both of which might have an important role in supporting good clinical decision making.

Prototype Software for Automated Structural Analysis of Systems

DEFF Research Database (Denmark)

Jørgensen, A.; Izadi-Zamanabadi, Roozbeh; Kristensen, M.

2004-01-01

In this paper we present a prototype software tool that is developed to analyse the structural model of automated systems in order to identify redundant information that is hence utilized for Fault detection and Isolation (FDI) purposes. The dedicated algorithms in this software tool use a tri......-partite graph that represents the structural model of the system. A component-based approach has been used to address issues such as system complexity and recon¯gurability possibilities....

Prototyping Advanced Control Systems on FPGA

Directory of Open Access Journals (Sweden)

Simard Stéphane

2009-01-01

Full Text Available In advanced digital control and mechatronics, FPGA-based systems on a chip (SoCs promise to supplant older technologies, such as microcontrollers and DSPs. However, the tackling of FPGA technology by control specialists is complicated by the need for skilled hardware/software partitioning and design in order to match the performance requirements of more and more complex algorithms while minimizing cost. Currently, without adequate software support to provide a straightforward design flow, the amount of time and efforts required is prohibitive. In this paper, we discuss our choice, adaptation, and use of a rapid prototyping platform and design flow suitable for the design of on-chip motion controllers and other SoCs with a need for analog interfacing. The platform consists of a customized FPGA design for the Amirix AP1000 PCI FPGA board coupled with a multichannel analog I/O daughter card. The design flow uses Xilinx System Generator in Matlab/Simulink for system design and test, and Xilinx Platform Studio for SoC integration. This approach has been applied to the analysis, design, and hardware implementation of a vector controller for 3-phase AC induction motors. It also has contributed to the development of CMC's MEMS prototyping platform, now used by several Canadian laboratories.

An abnormal event advisory expert system prototype for reactor operators

International Nuclear Information System (INIS)

Hance, D.C.

1989-01-01

Nuclear plant operators must respond correctly during abnormal conditions in the presence of dynamic and potentially overwhelming volumes of information. For this reason, considerable effort has been directed toward the development of nuclear plant operator aids using artificial intelligence techniques. The objective of such systems is to diagnose abnormal conditions within the plant, possibly predict consequences, and advise the operators of corrective actions in a timely manner. The objective of the work is the development of a prototype expert system to diagnose abnormal events at a nuclear power plant and advise plant operators of the event and applicable procedures in an on-line mode. The major difference between this effort and previous work is the use of plant operating procedures as a knowledge source and as an integral part of the advice provided by the expert system. The acceptance by utilities of expert systems as operator aids requires that such systems be compatible with the regulatory environment and provide economic benefits. For this reason, commercially viable operator aid systems developed in the near future must complement existing plant procedures rather than reach beyond them in a revolutionary manner. A knowledge source is the resource providing facts and relationships that are coded into the expert system program. In this case, the primary source of knowledge is a set of selected abnormal operating procedures for a modern Westinghouse pressurized water reactor

An Empirical Investigation of Architectural Prototyping

DEFF Research Database (Denmark)

Christensen, Henrik Bærbak; Hansen, Klaus Marius

2010-01-01

Architectural prototyping is the process of using executable code to investigate stakeholders’ software architecture concerns with respect to a system under development. Previous work has established this as a useful and cost-effective way of exploration and learning of the design space of a system...... and in addressing issues regarding quality attributes, architectural risks, and the problem of knowledge transfer and conformance. However, the actual industrial use of architectural prototyping has not been thoroughly researched so far. In this article, we report from three studies of architectural prototyping...... in practice. First, we report findings from an ethnographic study of practicing software architects. Secondly, we report from a focus group on architectural prototyping involving architects from four companies. And, thirdly, we report from a survey study of 20 practicing software architects and software...

Integrative pathway knowledge bases as a tool for systems molecular medicine.

Science.gov (United States)

Liang, Mingyu

2007-08-20

There exists a sense of urgency to begin to generate a cohesive assembly of biomedical knowledge as the pace of knowledge accumulation accelerates. The urgency is in part driven by the emergence of systems molecular medicine that emphasizes the combination of systems analysis and molecular dissection in the future of medical practice and research. A potentially powerful approach is to build integrative pathway knowledge bases that link organ systems function with molecules.

Large-scale computer networks and the future of legal knowledge-based systems

NARCIS (Netherlands)

Leenes, R.E.; Svensson, Jorgen S.; Hage, J.C.; Bench-Capon, T.J.M.; Cohen, M.J.; van den Herik, H.J.

1995-01-01

In this paper we investigate the relation between legal knowledge-based systems and large-scale computer networks such as the Internet. On the one hand, researchers of legal knowledge-based systems have claimed huge possibilities, but despite the efforts over the last twenty years, the number of

Advanced prototyping tools for project- and problem-based learning

DEFF Research Database (Denmark)

Teodorescu, Remus; Bech, Michael Møller; Holm, Allan J.

2002-01-01

A new approach in prototyping for project- and problem-based learning is achieved by using the new Total Development Environment concept introduced by dSPACE that allows a full visual block-oriented programming of dynamic real-time systems to be achieved  using the Matlab/Simulink environment...

Integration of object-oriented knowledge representation with the CLIPS rule based system

Science.gov (United States)

Logie, David S.; Kamil, Hasan

1990-01-01

The paper describes a portion of the work aimed at developing an integrated, knowledge based environment for the development of engineering-oriented applications. An Object Representation Language (ORL) was implemented in C++ which is used to build and modify an object-oriented knowledge base. The ORL was designed in such a way so as to be easily integrated with other representation schemes that could effectively reason with the object base. Specifically, the integration of the ORL with the rule based system C Language Production Systems (CLIPS), developed at the NASA Johnson Space Center, will be discussed. The object-oriented knowledge representation provides a natural means of representing problem data as a collection of related objects. Objects are comprised of descriptive properties and interrelationships. The object-oriented model promotes efficient handling of the problem data by allowing knowledge to be encapsulated in objects. Data is inherited through an object network via the relationship links. Together, the two schemes complement each other in that the object-oriented approach efficiently handles problem data while the rule based knowledge is used to simulate the reasoning process. Alone, the object based knowledge is little more than an object-oriented data storage scheme; however, the CLIPS inference engine adds the mechanism to directly and automatically reason with that knowledge. In this hybrid scheme, the expert system dynamically queries for data and can modify the object base with complete access to all the functionality of the ORL from rules.

EEVADO-ontology based construction of a knowledge based system for handling radiation emergency

International Nuclear Information System (INIS)

Datta, D.; Hegde, A.G.

2001-01-01

The basic aim of handling a radiation emergency is to protect the site personnel and public in the off-site areas. Hence it is required to assess the accident to develop the protective action recommendations for the site personnel, members of the public and emergency workers. An explanation facility is required to analyze the emergency situation and make needful decision. Algorithmic based software cannot provide this support as it does not have any such facility. A knowledge based system (KBS) obviously would act as a special purpose intelligent agent on behalf or at the behest of the emergency organization. Knowledge of the KBS has been elicited on the basis of ontology, a set of definitions of classes, objects, attributes, relations and constraints. Ontology provides a vocabulary for the expression of domain knowledge. The present paper discusses the development and utility of a knowledge based system - EEVADO (Emergency Evaluation and Dosimetry). The present software is verified and validated by ontology and by conducting Desktop Exercise in training program on Emergency Preparedness. (author)

The analysis phase in development of knowledge-based systems

International Nuclear Information System (INIS)

Brooking, A.G.

1986-01-01

Over the past twenty years computer scientists have realized that, in order to produce reliable software that is easily modifiable, a proven methodology is required. Unlike conventional systems there is little knowledge of the life cycle of these knowledge-based systems. However, if the life cycle of conventional systems, it is not unreasonable to assume that analysis will come first. With respect to the analysis task there is an enormous difference in types of analysis. Conventional systems analysis is predominately concerned with what happens within the system. Typically, procedures will be noted in the way they relate to each other, the way data moves and changes within the system. There is often an example, on paper or machine, that can be observed

Development of the EtsaTrans translation system prototype and its ...

African Journals Online (AJOL)

The issue of multilingualism at the University of the Free State (UFS) gained momentum with the development of the EtsaTrans translation system which is being developed according to the principles of example-based machine translation. In this article the development of the system prototype is described, and an ...

A knowledge- and model-based system for automated weaning from mechanical ventilation: technical description and first clinical application.

Science.gov (United States)

Schädler, Dirk; Mersmann, Stefan; Frerichs, Inéz; Elke, Gunnar; Semmel-Griebeler, Thomas; Noll, Oliver; Pulletz, Sven; Zick, Günther; David, Matthias; Heinrichs, Wolfgang; Scholz, Jens; Weiler, Norbert

2014-10-01

To describe the principles and the first clinical application of a novel prototype automated weaning system called Evita Weaning System (EWS). EWS allows an automated control of all ventilator settings in pressure controlled and pressure support mode with the aim of decreasing the respiratory load of mechanical ventilation. Respiratory load takes inspired fraction of oxygen, positive end-expiratory pressure, pressure amplitude and spontaneous breathing activity into account. Spontaneous breathing activity is assessed by the number of controlled breaths needed to maintain a predefined respiratory rate. EWS was implemented as a knowledge- and model-based system that autonomously and remotely controlled a mechanical ventilator (Evita 4, Dräger Medical, Lübeck, Germany). In a selected case study (n = 19 patients), ventilator settings chosen by the responsible physician were compared with the settings 10 min after the start of EWS and at the end of the study session. Neither unsafe ventilator settings nor failure of the system occurred. All patients were successfully transferred from controlled ventilation to assisted spontaneous breathing in a mean time of 37 ± 17 min (± SD). Early settings applied by the EWS did not significantly differ from the initial settings, except for the fraction of oxygen in inspired gas. During the later course, EWS significantly modified most of the ventilator settings and reduced the imposed respiratory load. A novel prototype automated weaning system was successfully developed. The first clinical application of EWS revealed that its operation was stable, safe ventilator settings were defined and the respiratory load of mechanical ventilation was decreased.

Knowledge-based control of an adaptive interface

Science.gov (United States)

Lachman, Roy

1989-01-01

The analysis, development strategy, and preliminary design for an intelligent, adaptive interface is reported. The design philosophy couples knowledge-based system technology with standard human factors approaches to interface development for computer workstations. An expert system has been designed to drive the interface for application software. The intelligent interface will be linked to application packages, one at a time, that are planned for multiple-application workstations aboard Space Station Freedom. Current requirements call for most Space Station activities to be conducted at the workstation consoles. One set of activities will consist of standard data management services (DMS). DMS software includes text processing, spreadsheets, data base management, etc. Text processing was selected for the first intelligent interface prototype because text-processing software can be developed initially as fully functional but limited with a small set of commands. The program's complexity then can be increased incrementally. The intelligent interface includes the operator's behavior and three types of instructions to the underlying application software are included in the rule base. A conventional expert-system inference engine searches the data base for antecedents to rules and sends the consequents of fired rules as commands to the underlying software. Plans for putting the expert system on top of a second application, a database management system, will be carried out following behavioral research on the first application. The intelligent interface design is suitable for use with ground-based workstations now common in government, industrial, and educational organizations.

An operator support system for research reactor operations and fault diagnosis through a connectionist framework and PSA based knowledge based systems

International Nuclear Information System (INIS)

Varde, P.V.; Sankar, S.; Verma, A.K.

1998-01-01

During reactor upset/abnormal conditions, emphasis is placed on the plant operator's ability to quickly identify the problem and perform diagnosis and initiate recovery action to ensure the safety of the plant. However, the reliability of human action is adversely affected at the time of crisis due to time stress and psychological factors. The availability of operational aids capable of monitoring the status of the plant and quickly identifying the deviation from normal operation is expected to significantly improve the operator reliability. The development of operator support systems using probabilistic safety assessment (PSA) techniques and information is finding wide application in nuclear plant operation. Often it is observed that most of the applications use a rule-based approach for diagnosis as well as safety status/transient conditions monitoring. A more efficient approach using artificial neural networks for safety status/transient condition monitoring and rule-based systems for diagnosis and emergency procedure generation has been applied for the development of a prototype operator adviser (OPAD) system for a 100 MW(th) heavy water moderated, cooled and natural uranium fueled research reactor. The development objective of this system is to improve the reliability of operator action and hence the reactor safety at the time of crisis as well as in normal operation. In order to address safety objectives at various stages of development of OPAD, the PSA techniques and tools have been used for knowledge representation. It has been demonstrated, with recall tests on the artificial neural network, that it can efficiently identify the reactor status in real-time scenario. This paper discusses various issues related to the development of an operator support system in a comprehensive way, right from the study of safety objectives, to data collection, to implementation of such a system

PERTS: A Prototyping Environment for Real-Time Systems

Science.gov (United States)

Liu, Jane W. S.; Lin, Kwei-Jay; Liu, C. L.

1993-01-01

PERTS is a prototyping environment for real-time systems. It is being built incrementally and will contain basic building blocks of operating systems for time-critical applications, tools, and performance models for the analysis, evaluation and measurement of real-time systems and a simulation/emulation environment. It is designed to support the use and evaluation of new design approaches, experimentations with alternative system building blocks, and the analysis and performance profiling of prototype real-time systems.

Knowledge-based full-automatic control system for a nuclear ship reactor

International Nuclear Information System (INIS)

Shimazaki, J.; Nakazawa, T.; Yabuuchi, N.

2000-01-01

Plant operations aboard nuclear ships require quick judgements and actions due to changing marine conditions such as wind, waves and currents. Furthermore, additional human support is not available for nuclear ship operation at sea, so advanced automatic operations are necessary to reduce the number of operators required finally. Therefore, an advanced automatic operating system has been developed based on operational knowledge of nuclear ship 'Mutsu' plant. The advanced automatic operating system includes both the automatic operation system and the operator-support system which assists operators in completing actions during plant accidents, anomaly diagnosis and plant supervision. These system are largely being developed using artificial intelligent techniques such as neural network, fuzzy logic and knowledge-based expert. The automatic operation system is fundamentally based upon application of an operator's knowledge of both normal (start-up to rated power level) and abnormal (after scram) operations. Comparing plant behaviors from start-up to power level by the automatic operation with by 'Mutsu' manual operation, stable automatic operation was obtained almost same as manual operation within all operating limits. The abnormal automatic system was for hard work of manual operations after scram or LOCA accidents. An integrating system with the normal and the abnormal automatic systems are being developed for interacting smoothly both systems. (author)

Knowledge-Based Control Systems via Internet Part I. Applications in Biotechnology

Directory of Open Access Journals (Sweden)

Georgi Georgiev

2005-04-01

Full Text Available An extensive approach towards the dissemination of expert knowledge and coordination efforts to distributed points and seamless integration of control strategies applied to distributed yet identical systems is crucial to enhance overall efficiency and operational costs. Application of Knowledge-Based Control System via Internet will be very efficient especially in biotechnology, because many industrial bioprocesses, based on the same technological principles, are distributed in the whole world. Brewing industry oriented practical solutions illustrate this approach.

Engineering Design of ITER Prototype Fast Plant System Controller

Science.gov (United States)

Goncalves, B.; Sousa, J.; Carvalho, B.; Rodrigues, A. P.; Correia, M.; Batista, A.; Vega, J.; Ruiz, M.; Lopez, J. M.; Rojo, R. Castro; Wallander, A.; Utzel, N.; Neto, A.; Alves, D.; Valcarcel, D.

2011-08-01

The ITER control, data access and communication (CODAC) design team identified the need for two types of plant systems. A slow control plant system is based on industrial automation technology with maximum sampling rates below 100 Hz, and a fast control plant system is based on embedded technology with higher sampling rates and more stringent real-time requirements than that required for slow controllers. The latter is applicable to diagnostics and plant systems in closed-control loops whose cycle times are below 1 ms. Fast controllers will be dedicated industrial controllers with the ability to supervise other fast and/or slow controllers, interface to actuators and sensors and, if necessary, high performance networks. Two prototypes of a fast plant system controller specialized for data acquisition and constrained by ITER technological choices are being built using two different form factors. This prototyping activity contributes to the Plant Control Design Handbook effort of standardization, specifically regarding fast controller characteristics. Envisaging a general purpose fast controller design, diagnostic use cases with specific requirements were analyzed and will be presented along with the interface with CODAC and sensors. The requirements and constraints that real-time plasma control imposes on the design were also taken into consideration. Functional specifications and technology neutral architecture, together with its implications on the engineering design, were considered. The detailed engineering design compliant with ITER standards was performed and will be discussed in detail. Emphasis will be given to the integration of the controller in the standard CODAC environment. Requirements for the EPICS IOC providing the interface to the outside world, the prototype decisions on form factor, real-time operating system, and high-performance networks will also be discussed, as well as the requirements for data streaming to CODAC for visualization and

Design and development of a 3D cadastral prototype based on the LADM and 3D topology

NARCIS (Netherlands)

Ying, S.; Guo, R.; Li, L.; Van Oosterom, P.J.M.; Ledoux, H.; Stoter, J.E.

2011-01-01

In this paper the design and development of a prototype 3D Cadastral system will be presented. The key aspects of this system are that the model is based on Land Administration Domain Model (LADM) and that the spatial profile is based on a full 3D topological structure. The prototype development

A decision support system based on hybrid knowledge approach for nuclear power plant operation

International Nuclear Information System (INIS)

Yang, J.O.; Chang, S.H.

1991-01-01

This paper describes a diagnostic expert system, HYPOSS (Hybrid Knowledge Based Plant Operation Supporting System), which has been developed to support operators' decision making during the transients of nuclear power plant. HYPOSS adopts the hybrid knowledge approach which combines shallow and deep knowledge to couple the merits of both approaches. In HYPOSS, four types of knowledge are used according to the steps of diagnosis procedure: structural, functional, behavioral and heuristic knowledge. Frames and rules are adopted to represent the various knowledge types. Rule-based deduction and abduction are used for shallow and deep knowledge based reasoning respectively. The event-based operational guidelines are provided to the operator according to the diagnosed results

Knowledge base verification based on enhanced colored petri net

Energy Technology Data Exchange (ETDEWEB)

Kim, Jong Hyun; Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1998-12-31

Verification is a process aimed at demonstrating whether a system meets it`s specified requirements. As expert systems are used in various applications, the knowledge base verification of systems takes an important position. The conventional Petri net approach that has been studied recently in order to verify the knowledge base is found that it is inadequate to verify the knowledge base of large and complex system, such as alarm processing system of nuclear power plant. Thus, we propose an improved method that models the knowledge base as enhanced colored Petri net. In this study, we analyze the reachability and the error characteristics of the knowledge base and apply the method to verification of simple knowledge base. 8 refs., 4 figs. (Author)

Knowledge base verification based on enhanced colored petri net

Energy Technology Data Exchange (ETDEWEB)

Kim, Jong Hyun; Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1997-12-31

Verification is a process aimed at demonstrating whether a system meets it`s specified requirements. As expert systems are used in various applications, the knowledge base verification of systems takes an important position. The conventional Petri net approach that has been studied recently in order to verify the knowledge base is found that it is inadequate to verify the knowledge base of large and complex system, such as alarm processing system of nuclear power plant. Thus, we propose an improved method that models the knowledge base as enhanced colored Petri net. In this study, we analyze the reachability and the error characteristics of the knowledge base and apply the method to verification of simple knowledge base. 8 refs., 4 figs. (Author)

A knowledge-base verification of NPP expert systems using extended Petri nets

International Nuclear Information System (INIS)

Kwon, Il Won; Seong, Poong Hyun

1995-01-01

The verification phase of knowledge base is an important part for developing reliable expert systems, especially in nuclear industry. Although several strategies or tools have been developed to perform potential error checking, they often neglect the reliability of verification methods. Because a Petri net provides a uniform mathematical formalization of knowledge base, it has been employed for knowledge base verification. In this work, we devise and suggest an automated tool, called COKEP (Checker Of Knowledge base using Extended Petri net), for detecting incorrectness, inconsistency, and incompleteness in a knowledge base. The scope of the verification problem is expanded to chained errors, unlike previous studies that assumed error incidence to be limited to rule pairs only. In addition, we consider certainty factor in checking, because most of knowledge bases have certainty factors

Knowledge Representation and Inference for Analysis and Design of Database and Tabular Rule-Based Systems

Directory of Open Access Journals (Sweden)

Antoni Ligeza

2001-01-01

Full Text Available Rulebased systems constitute a powerful tool for specification of knowledge in design and implementation of knowledge based systems. They provide also a universal programming paradigm for domains such as intelligent control, decision support, situation classification and operational knowledge encoding. In order to assure safe and reliable performance, such system should satisfy certain formal requirements, including completeness and consistency. This paper addresses the issue of analysis and verification of selected properties of a class of such system in a systematic way. A uniform, tabular scheme of single-level rule-based systems is considered. Such systems can be applied as a generalized form of databases for specification of data pattern (unconditional knowledge, or can be used for defining attributive decision tables (conditional knowledge in form of rules. They can also serve as lower-level components of a hierarchical multi-level control and decision support knowledge-based systems. An algebraic knowledge representation paradigm using extended tabular representation, similar to relational database tables is presented and algebraic bases for system analysis, verification and design support are outlined.

SIMS prototype system 1 test results: Engineering analysis

Science.gov (United States)

1978-01-01

The space and domestic water solar heating system designated SIMS Prototype Systems 1 was evaluated. The test system used 720 ft (gross) of Solar Energy Products Air Collectors, a Solar Control Corporation SAM 20 Air Handler with Model 75-175 control unit, a Jackson Solar Storage tank with Rho Sigma Mod 106 controller, and 20 tons of rack storage. The test data analysis performed evaluates the system performance and documents the suitability of SIMS Prototype System 1 hardware for field installation.

A Tower-based Prototype VHF/UHF Radar for Subsurface Sensing: System Description and Data Inversion Results

Science.gov (United States)

Moghaddam, Mahta; Pierce, Leland; Tabatabaeenejad, Alireza; Rodriguez, Ernesto

2005-01-01

Knowledge of subsurface characteristics such as permittivity variations and layering structure could provide a breakthrough in many terrestrial and planetary science disciplines. For Earth science, knowledge of subsurface and subcanopy soil moisture layers can enable the estimation of vertical flow in the soil column linking surface hydrologic processes with that in the subsurface. For planetary science, determining the existence of subsurface water and ice is regarded as one of the most critical information needs for the study of the origins of the solar system. The subsurface in general can be described as several near-parallel layers with rough interfaces. Each homogenous rough layer can be defined by its average thickness, permittivity, and rms interface roughness assuming a known surface spectral distribution. As the number and depth of layers increase, the number of measurements needed to invert for the layer unknowns also increases, and deeper penetration capability would be required. To nondestructively calculate the characteristics of the rough layers, a multifrequency polarimetric radar backscattering approach can be used. One such system is that we have developed for data prototyping of the Microwave Observatory of Subcanopy and Subsurface (MOSS) mission concept. A tower-mounted radar makes backscattering measurements at VHF, UHF, and L-band frequencies. The radar is a pulsed CW system, which uses the same wideband antenna to transmit and receive the signals at all three frequencies. To focus the beam at various incidence angles within the beamwidth of the antenna, the tower is moved vertically and measurements made at each position. The signals are coherently summed to achieve focusing and image formation in the subsurface. This requires an estimate of wave velocity profiles. To solve the inverse scattering problem for subsurface velocity profile simultaneously with radar focusing, we use an iterative technique based on a forward numerical solution of

NetWeaver for EMDS user guide (version 1.1): a knowledge base development system.

Science.gov (United States)

Keith M. Reynolds

1999-01-01

The guide describes use of the NetWeaver knowledge base development system. Knowledge representation in NetWeaver is based on object-oriented fuzzy-logic networks that offer several significant advantages over the more traditional rulebased representation. Compared to rule-based knowledge bases, NetWeaver knowledge bases are easier to build, test, and maintain because...

Baking of the vacuum vessel prototype of the Spanish stellarator with a control system based on neural network

International Nuclear Information System (INIS)

Botija, J.; Alonso, J.; Blaumoser, M.

1995-01-01

To bake uniformly, up to 150 C, the vacuum vessel of the Spanish Stellarator TJ-II represents a difficult task to be demonstrated. In order to study the temperature distribution in the vessel, a prototype of this vacuum vessel, mounted in a stainless steel structure, has been heated by means of electrical panels and eddy currents. The induction heating system is provided applying 498 A/11.7 V at 50 Hz to the toroidal field coil located in the middle of the vessel prototype. Practically, this system only heats adequately the rings and poorly the so called groove of the vacuum vessel. On the contrary, the electrical heaters, with a power density of 0.5 W/cm 2 , heat the external part of the sectors and ports. The high density of temperature sensors ensures the uniformity of the heating process during the long heating cycles, making advisable a fault-tolerant control system based on Artificial Neural Networks (ANNs) that implements the control loop to regulate and protect both heating systems. This paper deals with the results of this experiment

Multichannel prototype of coordinate detector based on segmented straws

International Nuclear Information System (INIS)

Gusakov, Yu.V.; Davkov, V.I.; Davkov, K.I.; Zhukov, I.A.; Lutsenko, V.M.; Myalkovskij, V.V.; Peshekhonov, V.D.; Savenkov, A.A.

2010-01-01

The design and assembly technology of a detector prototype based on segmented straws is considered. The granularity of the prototype is 4 cm 2 . The prototype has a sensitive area of 400 x 200 mm, and contains two straw planes displaced against each other by 2 mm. The number of registration channels is 360. Preliminary results of the bench study of the prototype are presented

Knowledge-based geographic information systems (KBGIS): New analytic and data management tools

Science.gov (United States)

Albert, T.M.

1988-01-01

In its simplest form, a geographic information system (GIS) may be viewed as a data base management system in which most of the data are spatially indexed, and upon which sets of procedures operate to answer queries about spatial entities represented in the data base. Utilization of artificial intelligence (AI) techniques can enhance greatly the capabilities of a GIS, particularly in handling very large, diverse data bases involved in the earth sciences. A KBGIS has been developed by the U.S. Geological Survey which incorporates AI techniques such as learning, expert systems, new data representation, and more. The system, which will be developed further and applied, is a prototype of the next generation of GIS's, an intelligent GIS, as well as an example of a general-purpose intelligent data handling system. The paper provides a description of KBGIS and its application, as well as the AI techniques involved. ?? 1988 International Association for Mathematical Geology.

Laboratory scale prototype of a low-speed electrodynamic levitation system based on a Halbach magnet array

International Nuclear Information System (INIS)

Iniguez, J; Raposo, V

2009-01-01

In this paper we analyse the behaviour of a small-scale model of a magnetic levitation system based on the Inductrack concept. Drag and lift forces acting on our prototype, moving above a continuous copper track, are studied analytically following a simple low-speed approach. The experimental results are in good agreement with the theoretical calculations. 3D-numerical simulations are also used to highlight the significance of the edge effects and to extrapolate the results to higher speeds

Laboratory scale prototype of a low-speed electrodynamic levitation system based on a Halbach magnet array

Energy Technology Data Exchange (ETDEWEB)

Iniguez, J; Raposo, V [Departamento de Fisica Aplicada, Universidad de Salamanca, E-37071 (Spain)

2009-03-15

In this paper we analyse the behaviour of a small-scale model of a magnetic levitation system based on the Inductrack concept. Drag and lift forces acting on our prototype, moving above a continuous copper track, are studied analytically following a simple low-speed approach. The experimental results are in good agreement with the theoretical calculations. 3D-numerical simulations are also used to highlight the significance of the edge effects and to extrapolate the results to higher speeds.

Landslide and Flood Warning System Prototypes based on Wireless Sensor Networks

Science.gov (United States)

Hloupis, George; Stavrakas, Ilias; Triantis, Dimos

2010-05-01

Wireless sensor networks (WSNs) are one of the emerging areas that received great attention during the last few years. This is mainly due to the fact that WSNs have provided scientists with the capability of developing real-time monitoring systems equipped with sensors based on Micro-Electro-Mechanical Systems (MEMS). WSNs have great potential for many applications in environmental monitoring since the sensor nodes that comprised from can host several MEMS sensors (such as temperature, humidity, inertial, pressure, strain-gauge) and transducers (such as position, velocity, acceleration, vibration). The resulting devices are small and inexpensive but with limited memory and computing resources. Each sensor node contains a sensing module which along with an RF transceiver. The communication is broadcast-based since the network topology can change rapidly due to node failures [1]. Sensor nodes can transmit their measurements to central servers through gateway nodes without any processing or they make preliminary calculations locally in order to produce results that will be sent to central servers [2]. Based on the above characteristics, two prototypes using WSNs are presented in this paper: A Landslide detection system and a Flood warning system. Both systems sent their data to central processing server where the core of processing routines exists. Transmission is made using Zigbee and IEEE 802.11b protocol but is capable to use VSAT communication also. Landslide detection system uses structured network topology. Each measuring node comprises of a columnar module that is half buried to the area under investigation. Each sensing module contains a geophone, an inclinometer and a set of strain gauges. Data transmitted to central processing server where possible landslide evolution is monitored. Flood detection system uses unstructured network topology since the failure rate of sensor nodes is expected higher. Each sensing module contains a custom water level sensor

VIP: A knowledge-based design aid for the engineering of space systems

Science.gov (United States)

Lewis, Steven M.; Bellman, Kirstie L.

1990-01-01

The Vehicles Implementation Project (VIP), a knowledge-based design aid for the engineering of space systems is described. VIP combines qualitative knowledge in the form of rules, quantitative knowledge in the form of equations, and other mathematical modeling tools. The system allows users rapidly to develop and experiment with models of spacecraft system designs. As information becomes available to the system, appropriate equations are solved symbolically and the results are displayed. Users may browse through the system, observing dependencies and the effects of altering specific parameters. The system can also suggest approaches to the derivation of specific parameter values. In addition to providing a tool for the development of specific designs, VIP aims at increasing the user's understanding of the design process. Users may rapidly examine the sensitivity of a given parameter to others in the system and perform tradeoffs or optimizations of specific parameters. A second major goal of VIP is to integrate the existing corporate knowledge base of models and rules into a central, symbolic form.

ISPE: A knowledge-based system for fluidization studies

Energy Technology Data Exchange (ETDEWEB)

Reddy, S.

1991-01-01

Chemical engineers use mathematical simulators to design, model, optimize and refine various engineering plants/processes. This procedure requires the following steps: (1) preparation of an input data file according to the format required by the target simulator; (2) excecuting the simulation; and (3) analyzing the results of the simulation to determine if all specified goals'' are satisfied. If the goals are not met, the input data file must be modified and the simulation repeated. This multistep process is continued until satisfactory results are obtained. This research was undertaken to develop a knowledge based system, IPSE (Intelligent Process Simulation Environment), that can enhance the productivity of chemical engineers/modelers by serving as an intelligent assistant to perform a variety tasks related to process simulation. ASPEN, a widely used simulator by the US Department of Energy (DOE) at Morgantown Energy Technology Center (METC) was selected as the target process simulator in the project. IPSE, written in the C language, was developed using a number of knowledge-based programming paradigms: object-oriented knowledge representation that uses inheritance and methods, rulebased inferencing (includes processing and propagation of probabilistic information) and data-driven programming using demons. It was implemented using the knowledge based environment LASER. The relationship of IPSE with the user, ASPEN, LASER and the C language is shown in Figure 1.

Knowledge-based system for flight information management. Thesis

Science.gov (United States)

Ricks, Wendell R.

1990-01-01

The use of knowledge-based system (KBS) architectures to manage information on the primary flight display (PFD) of commercial aircraft is described. The PFD information management strategy used tailored the information on the PFD to the tasks the pilot performed. The KBS design and implementation of the task-tailored PFD information management application is described. The knowledge acquisition and subsequent system design of a flight-phase-detection KBS is also described. The flight-phase output of this KBS was used as input to the task-tailored PFD information management KBS. The implementation and integration of this KBS with existing aircraft systems and the other KBS is described. The flight tests are examined of both KBS's, collectively called the Task-Tailored Flight Information Manager (TTFIM), which verified their implementation and integration, and validated the software engineering advantages of the KBS approach in an operational environment.

Knowledge-Based Systems for the Assessment and Management of Bridge Structures

DEFF Research Database (Denmark)

Miyamoto, A.; Thoft-Christensen, Palle; Yan, B.

2004-01-01

. The aim of this paper is to summarize the finding of up-to-date research articles concerning the application of knowledge-based systems to assessment and management of structures and to illustrate the potential of such systems in the structural engineering. Two modern bridge management systems (BMS......It is becoming an important social problem to make maintenance and rehabilitation of existing infrastructures such as bridges, buildings, etc. The kernel of such structure management is to develop a method of safety assessment on items which include remaining life and load carrying capacity......'s) are presented in the paper. The first is a BMS to assess the performance and derive optimal strategies for inspection and maintenance of concrete structures using reliability based and knowledge based systems. The second is the concrete bridge rating expert system (BREX) to evaluate the performance of existing...

Development of a Prototype Model-Form Uncertainty Knowledge Base

Science.gov (United States)

Green, Lawrence L.

2016-01-01

Uncertainties are generally classified as either aleatory or epistemic. Aleatory uncertainties are those attributed to random variation, either naturally or through manufacturing processes. Epistemic uncertainties are generally attributed to a lack of knowledge. One type of epistemic uncertainty is called model-form uncertainty. The term model-form means that among the choices to be made during a design process within an analysis, there are different forms of the analysis process, which each give different results for the same configuration at the same flight conditions. Examples of model-form uncertainties include the grid density, grid type, and solver type used within a computational fluid dynamics code, or the choice of the number and type of model elements within a structures analysis. The objectives of this work are to identify and quantify a representative set of model-form uncertainties and to make this information available to designers through an interactive knowledge base (KB). The KB can then be used during probabilistic design sessions, so as to enable the possible reduction of uncertainties in the design process through resource investment. An extensive literature search has been conducted to identify and quantify typical model-form uncertainties present within aerospace design. An initial attempt has been made to assemble the results of this literature search into a searchable KB, usable in real time during probabilistic design sessions. A concept of operations and the basic structure of a model-form uncertainty KB are described. Key operations within the KB are illustrated. Current limitations in the KB, and possible workarounds are explained.

An ontological knowledge based system for selection of process monitoring and analysis tools

DEFF Research Database (Denmark)

Singh, Ravendra; Gernaey, Krist; Gani, Rafiqul

2010-01-01

monitoring and analysis tools for a wide range of operations has made their selection a difficult, time consuming and challenging task. Therefore, an efficient and systematic knowledge base coupled with an inference system is necessary to support the optimal selection of process monitoring and analysis tools......, satisfying the process and user constraints. A knowledge base consisting of the process knowledge as well as knowledge on measurement methods and tools has been developed. An ontology has been designed for knowledge representation and management. The developed knowledge base has a dual feature. On the one...... procedures has been developed to retrieve the data/information stored in the knowledge base....

Supporting Active Patient and Health Care Collaboration: A Prototype for Future Health Care Information Systems.

Science.gov (United States)

Åhlfeldt, Rose-Mharie; Persson, Anne; Rexhepi, Hanife; Wåhlander, Kalle

2016-12-01

This article presents and illustrates the main features of a proposed process-oriented approach for patient information distribution in future health care information systems, by using a prototype of a process support system. The development of the prototype was based on the Visuera method, which includes five defined steps. The results indicate that a visualized prototype is a suitable tool for illustrating both the opportunities and constraints of future ideas and solutions in e-Health. The main challenges for developing and implementing a fully functional process support system concern both technical and organizational/management aspects. © The Author(s) 2015.

Prototype Theory Based Feature Representation for PolSAR Images

OpenAIRE

Huang Xiaojing; Yang Xiangli; Huang Pingping; Yang Wen

2016-01-01

This study presents a new feature representation approach for Polarimetric Synthetic Aperture Radar (PolSAR) image based on prototype theory. First, multiple prototype sets are generated using prototype theory. Then, regularized logistic regression is used to predict similarities between a test sample and each prototype set. Finally, the PolSAR image feature representation is obtained by ensemble projection. Experimental results of an unsupervised classification of PolSAR images show that our...

Software Prototyping

Science.gov (United States)

Del Fiol, Guilherme; Hanseler, Haley; Crouch, Barbara Insley; Cummins, Mollie R.

2016-01-01

Summary Background Health information exchange (HIE) between Poison Control Centers (PCCs) and Emergency Departments (EDs) could improve care of poisoned patients. However, PCC information systems are not designed to facilitate HIE with EDs; therefore, we are developing specialized software to support HIE within the normal workflow of the PCC using user-centered design and rapid prototyping. Objective To describe the design of an HIE dashboard and the refinement of user requirements through rapid prototyping. Methods Using previously elicited user requirements, we designed low-fidelity sketches of designs on paper with iterative refinement. Next, we designed an interactive high-fidelity prototype and conducted scenario-based usability tests with end users. Users were asked to think aloud while accomplishing tasks related to a case vignette. After testing, the users provided feedback and evaluated the prototype using the System Usability Scale (SUS). Results Survey results from three users provided useful feedback that was then incorporated into the design. After achieving a stable design, we used the prototype itself as the specification for development of the actual software. Benefits of prototyping included having 1) subject-matter experts heavily involved with the design; 2) flexibility to make rapid changes, 3) the ability to minimize software development efforts early in the design stage; 4) rapid finalization of requirements; 5) early visualization of designs; 6) and a powerful vehicle for communication of the design to the programmers. Challenges included 1) time and effort to develop the prototypes and case scenarios; 2) no simulation of system performance; 3) not having all proposed functionality available in the final product; and 4) missing needed data elements in the PCC information system. PMID:27081404

Interactive visual steering--rapid visual prototyping of a common rail injection system.

Science.gov (United States)

Matković, Kresimir; Gracanin, Denis; Jelović, Mario; Hauser, Helwig

2008-01-01

Interactive steering with visualization has been a common goal of the visualization research community for twenty years, but it is rarely ever realized in practice. In this paper we describe a successful realization of a tightly coupled steering loop, integrating new simulation technology and interactive visual analysis in a prototyping environment for automotive industry system design. Due to increasing pressure on car manufacturers to meet new emission regulations, to improve efficiency, and to reduce noise, both simulation and visualization are pushed to their limits. Automotive system components, such as the powertrain system or the injection system have an increasing number of parameters, and new design approaches are required. It is no longer possible to optimize such a system solely based on experience or forward optimization. By coupling interactive visualization with the simulation back-end (computational steering), it is now possible to quickly prototype a new system, starting from a non-optimized initial prototype and the corresponding simulation model. The prototyping continues through the refinement of the simulation model, of the simulation parameters and through trial-and-error attempts to an optimized solution. The ability to early see the first results from a multidimensional simulation space--thousands of simulations are run for a multidimensional variety of input parameters--and to quickly go back into the simulation and request more runs in particular parameter regions of interest significantly improves the prototyping process and provides a deeper understanding of the system behavior. The excellent results which we achieved for the common rail injection system strongly suggest that our approach has a great potential of being generalized to other, similar scenarios.

Integrating knowledge based functionality in commercial hospital information systems.

Science.gov (United States)

Müller, M L; Ganslandt, T; Eich, H P; Lang, K; Ohmann, C; Prokosch, H U

2000-01-01

Successful integration of knowledge-based functions in the electronic patient record depends on direct and context-sensitive accessibility and availability to clinicians and must suit their workflow. In this paper we describe an exemplary integration of an existing standalone scoring system for acute abdominal pain into two different commercial hospital information systems using Java/Corba technolgy.

Knowledge Acquisition Using Linguistic-Based Knowledge Analysis

Science.gov (United States)

Daniel L. Schmoldt

1998-01-01

Most knowledge-based system developmentefforts include acquiring knowledge from one or more sources. difficulties associated with this knowledge acquisition task are readily acknowledged by most researchers. While a variety of knowledge acquisition methods have been reported, little has been done to organize those different methods and to suggest how to apply them...

Design Method of ADAS for Urban Electric Vehicle Based on Virtual Prototyping

Directory of Open Access Journals (Sweden)

Katarzyna Jezierska-Krupa

2018-01-01

Full Text Available Since 2012, the Smart Power Team has been actively participating in the Shell Eco-marathon, which is a worldwide competition. From the very beginning, the team has been working to increase driver’s safety on the road by developing Advanced Driver Assistance Systems. This paper presents unique method for designing ADAS systems in order to minimize the costs of the design phase and system implementation and, at the same time, to maximize the positive effect the system has on driver and vehicle safety. The described method is based on using virtual prototyping tool to simulate the system performance in real-life situations. This approach enabled an iterative design process, which resulted in reduction of errors with almost no prototyping and testing costs.

A software prototype development of human system interfaces for human factors engineering validation tests of SMART MCR

International Nuclear Information System (INIS)

Lim, Jong Tae; Han, Kwan Ho; Yang, Seung Won

2011-02-01

An integrated system validation test bed used for human factors engineering validation test is being developed. This study has a goal to develop a software prototype for HFE validation of SMART MCR design. To achieve these, first, some prototype specifications of the software was developed. Then software prototypes of alarm reduction logic system, Plant Protection System, ESF-CCS, Elastic Tile Alarm Indication, and EID-based HSIs were implemented as codes. Test procedures for the software prototypes were established to verify the completeness of the codes implemented. The careful software test has been done according to these test procedures, and the result were documented

Knowledge-based machine indexing from natural language text: Knowledge base design, development, and maintenance

Science.gov (United States)

Genuardi, Michael T.

1993-01-01

One strategy for machine-aided indexing (MAI) is to provide a concept-level analysis of the textual elements of documents or document abstracts. In such systems, natural-language phrases are analyzed in order to identify and classify concepts related to a particular subject domain. The overall performance of these MAI systems is largely dependent on the quality and comprehensiveness of their knowledge bases. These knowledge bases function to (1) define the relations between a controlled indexing vocabulary and natural language expressions; (2) provide a simple mechanism for disambiguation and the determination of relevancy; and (3) allow the extension of concept-hierarchical structure to all elements of the knowledge file. After a brief description of the NASA Machine-Aided Indexing system, concerns related to the development and maintenance of MAI knowledge bases are discussed. Particular emphasis is given to statistically-based text analysis tools designed to aid the knowledge base developer. One such tool, the Knowledge Base Building (KBB) program, presents the domain expert with a well-filtered list of synonyms and conceptually-related phrases for each thesaurus concept. Another tool, the Knowledge Base Maintenance (KBM) program, functions to identify areas of the knowledge base affected by changes in the conceptual domain (for example, the addition of a new thesaurus term). An alternate use of the KBM as an aid in thesaurus construction is also discussed.

Understanding Immunology via Engineering Design: The Role of Mathematical Prototyping

Science.gov (United States)

Klinke, David J.; Wang, Qing

2012-01-01

A major challenge in immunology is how to translate data into knowledge given the inherent complexity and dynamics of human physiology. Both the physiology and engineering communities have rich histories in applying computational approaches to translate data obtained from complex systems into knowledge of system behavior. However, there are some differences in how disciplines approach problems. By referring to mathematical models as mathematical prototypes, we aim to highlight aspects related to the process (i.e., prototyping) rather than the product (i.e., the model). The objective of this paper is to review how two related engineering concepts, specifically prototyping and “fitness for use,” can be applied to overcome the pressing challenge in translating data into improved knowledge of basic immunology that can be used to improve therapies for disease. These concepts are illustrated using two immunology-related examples. The prototypes presented focus on the beta cell mass at the onset of type 1 diabetes and the dynamics of dendritic cells in the lung. This paper is intended to illustrate some of the nuances associated with applying mathematical modeling to improve understanding of the dynamics of disease progression in humans. PMID:22973412

Automated knowledge-base refinement

Science.gov (United States)

Mooney, Raymond J.

1994-01-01

Over the last several years, we have developed several systems for automatically refining incomplete and incorrect knowledge bases. These systems are given an imperfect rule base and a set of training examples and minimally modify the knowledge base to make it consistent with the examples. One of our most recent systems, FORTE, revises first-order Horn-clause knowledge bases. This system can be viewed as automatically debugging Prolog programs based on examples of correct and incorrect I/O pairs. In fact, we have already used the system to debug simple Prolog programs written by students in a programming language course. FORTE has also been used to automatically induce and revise qualitative models of several continuous dynamic devices from qualitative behavior traces. For example, it has been used to induce and revise a qualitative model of a portion of the Reaction Control System (RCS) of the NASA Space Shuttle. By fitting a correct model of this portion of the RCS to simulated qualitative data from a faulty system, FORTE was also able to correctly diagnose simple faults in this system.

Biosphere 2: a prototype project for a permanent and evolving life system for Mars base.

Science.gov (United States)

Nelson, M; Allen, J P; Dempster, W F

1992-01-01

As part of the ground-based preparation for creating long-term life systems needed for space habitation and settlement, Space Biospheres Ventures (SBV) is undertaking the Biosphere 2 project near Oracle, Arizona. Biosphere 2, currently under construction, is scheduled to commence its operations in 1991 with a two-year closure period with a crew of eight people. Biosphere 2 is a facility which will be essentialy materially-closed to exchange with the outside environment. It is open to information and energy flow. Biosphere 2 is designed to achieve a complex life-support system by the integration of seven areas or "biomes"--rainforest, savannah, desert, marsh, ocean, intensive agriculture and human habitat. Unique bioregenerative technologies, such as soil bed reactors for air purification, aquatic waste processing systems, real-time analytic systems and complex computer monitoring and control systems are being developed for the Biosphere 2 project. Its operation should afford valuable insight into the functioning of complex life systems necessary for long-term habitation in space. It will serve as an experimental ground-based prototype and testbed for the stable, permanent life systems needed for human exploration of Mars.

Biosphere 2: A prototype project for a permanent and evolving life system for Mars base

Science.gov (United States)

Nelson, Mark; Allen, John P.; Dempster, William F.

As part of the ground-based preparation for creating long-term life systems needed for space habitation and settlement, Space Biopsheres Ventures (SBV) is undertaking the Biosphere 2 project near Oracle, Arizona. Biosphere 2, currently under construction, is scheduled to commence its operations in 1991 with a two-year closure period with a crew of eight people. Biosphere 2 is a facility which will be essentially materially-closed to exchange with the outside environment. It is open to information and energy flow. Biosphere 2 is designed to achieve a complex life-support system by the integration of seven areas or ``biomes'' - rainforest, savannah, desert, marsh, ocean, intensive agriculture and human habitat. Unique bioregenerative technologies, such as soil bed reactors for air purification, aquatic waste processing systems, real-time analytic systems and complex computer monitoring and control systems are being developed for the Biosphere 2 project. Its operation should afford valuable insight into the functioning of complex life systems necessary for long-term habitation in space. It will serve as an experimental ground-based prototype and testbed for the stable, permanent life systems needed for human exploration of Mars.

A Knowledge-based System for the Analysis of the Ability of Paying back Loans

Institute of Scientific and Technical Information of China (English)

朱明; 杨保安

2001-01-01

This paper describes the development of a knowledgebased system (KBS) for determining whether or not, and under what conditions, a bank Ioan officer should grant a business loan to a company. The prototype system developed focuses on what is bank loans risks management, how to prevent risk by the analysis of the ability of paying back loans. The paper makes the structural analysis involved in the system's decision situation, the structured situation diagram or model, dependency diagram and the document needed by the KBS prototype system thus are developed. Through testing the samples from loan business, the quality for the analysis of the ability of paying back loans can be effectively evaluated by the KBS prototype system.

Foundation: Transforming data bases into knowledge bases

Science.gov (United States)

Purves, R. B.; Carnes, James R.; Cutts, Dannie E.

1987-01-01

One approach to transforming information stored in relational data bases into knowledge based representations and back again is described. This system, called Foundation, allows knowledge bases to take advantage of vast amounts of pre-existing data. A benefit of this approach is inspection, and even population, of data bases through an intelligent knowledge-based front-end.

Systems Prototyping with Fourth Generation Tools.

Science.gov (United States)

Sholtys, Phyllis

1983-01-01

The development of information systems using an engineering approach that uses both traditional programing techniques and fourth generation software tools is described. Fourth generation applications tools are used to quickly develop a prototype system that is revised as the user clarifies requirements. (MLW)

Prototyping low-cost and flexible vehicle diagnostic systems

Directory of Open Access Journals (Sweden)

Marisol GARCÍA-VALLS

2016-12-01

Full Text Available Diagnostic systems are software and hardware-based equipment that interoperate with an external monitored system. Traditionally, they have been expensive equipment running test algorithms to monitor physical properties of, e.g., vehicles, or civil infrastructure equipment, among others. As computer hardware is increasingly powerful (whereas its cost and size is decreasing and communication software becomes easier to program and more run-time efficient, new scenarios are enabled that yield to lower cost monitoring solutions. This paper presents a low cost approach towards the development of a diagnostic systems relying on a modular component-based approach and running on a resource limited embedded computer. Results on a prototype implementation are shown that validate the presented design, its flexibility, performance, and communication latency.

A knowledge-based flight status monitor for real-time application in digital avionics systems

Science.gov (United States)

Duke, E. L.; Disbrow, J. D.; Butler, G. F.

1989-01-01

The Dryden Flight Research Facility of the National Aeronautics and Space Administration (NASA) Ames Research Center (Ames-Dryden) is the principal NASA facility for the flight testing and evaluation of new and complex avionics systems. To aid in the interpretation of system health and status data, a knowledge-based flight status monitor was designed. The monitor was designed to use fault indicators from the onboard system which are telemetered to the ground and processed by a rule-based model of the aircraft failure management system to give timely advice and recommendations in the mission control room. One of the important constraints on the flight status monitor is the need to operate in real time, and to pursue this aspect, a joint research activity between NASA Ames-Dryden and the Royal Aerospace Establishment (RAE) on real-time knowledge-based systems was established. Under this agreement, the original LISP knowledge base for the flight status monitor was reimplemented using the intelligent knowledge-based system toolkit, MUSE, which was developed under RAE sponsorship. Details of the flight status monitor and the MUSE implementation are presented.

Knowledge-based methods for control systems

International Nuclear Information System (INIS)

Larsson, J.E.

1992-01-01

This thesis consists of three projects which combine artificial intelligence and control. The first part describes an expert system interface for system identification, using the interactive identification program Idpac. The interface works as an intelligent help system, using the command spy strategy. It contains a multitude of help system ideas. The concept of scripts is introduced as a data structure used to describe the procedural part of the knowledge in the interface. Production rules are used to represent diagnostic knowledge. A small knowledge database of scripts and rules has been developed and an example run is shown. The second part describes an expert system for frequency response analysis. This is one of the oldest and most widely used methods to determine the dynamics of a stable linear system. Though quite simple, it requires knowledge and experience of the user, in order to produce reliable results. The expert system is designed to help the user in performing the analysis. It checks whether the system is linear, finds the frequency and amplitude ranges, verifies the results, and, if errors should occur, tries to give explanation and remedies for them. The third part describes three diagnostic methods for use with industrial processes. They are measurement validation, i.e., consistency checking of sensor and measurement values using any redundancy of instrumentation; alarm analysis, i.e. analysis of multiple alarm situations to find which alarms are directly connected to primary faults and which alarms are consequential effects of the primary ones; and fault diagnosis, i.e., a search for the causes of and remedies for faults. The three methods use multilevel flow models, (MFM), to describe the target process. They have been implemented in the programming tool G2, and successfully tested on two small processes. (164 refs.) (au)

Developmental prototype for replacement of JT-60 timing system

International Nuclear Information System (INIS)

Akasaka, H.; Kawamata, Y.; Yonekawa, I.

2004-01-01

The present CAMAC based timing system has been used for synchronizing sequential events of the discharge and the data collection of the interesting JT-60U experiment plasma phenomena. However, a more flexible and sophisticated state-of-the-art timing system now is required to realize advanced plasma control with minimal maintenance costs. In this context, the versa module Europe (VME-bus) system with a high-speed data communication network using reflective memory (RM) modules and user-friendly application software based on MATLAB TM tools has been selected to develop the new prototype timing system. In the ZENKEI, the supervisory control system of the JT-60, the supervisory timing system provides the 50-μs master clock pulses, the various timing signal preparation logic, which is built into the digital signal processing (DSP) module in conjunction with the discharge sequence event signals, and the 6.2 MB/s high-speed communication data link provided by the RM module. Except the clock pulse generator (CPG) module, no other special timing module is necessary for this new timing system. The timing signal is prepared by software logic in conjunction with sequential events and the preset timer, is transferred to the subsystems through the RM module, where it is synchronized to the 50-μs clock pulses. The timing system of the subsystems also consists of hardware similar in structure to the ZENKEI timing system. The fundamental timing system configuration, the necessary functions, and the preliminary test results of the prototype system are reported in this presentation

Detector evaluation of a prototype amorphous selenium-based full field digital mammography system

Science.gov (United States)

Jesneck, Jonathan L.; Saunders, Robert S.; Samei, Ehsan; Xia, Jessie Q.; Lo, Joseph Y.

2005-04-01

This study evaluated the physical performance of a selenium-based direct full-field digital mammography prototype detector (Siemens Mammomat NovationDR), including the pixel value vs. exposure linearity, the modulation transfer function (MTF), the normalized noise power spectrum (NNPS), and the detective quantum efficiency (DQE). The current detector is the same model which received an approvable letter from FDA for release to the US market. The results of the current prototype are compared to those of an earlier prototype. Two IEC standard beam qualities (RQA-M2: Mo/Mo, 28 kVp, 2 mm Al; RQA-M4: Mo/Mo, 35 kVp, 2 mm Al) and two additional beam qualities (MW2: W/Rh, 28 kVp, 2 mm Al; MW4: W/Rh, 35 kVp, 2 mm Al) were investigated. To calculate the modulation transfer function (MTF), a 0.1 mm Pt-Ir edge was imaged at each beam quality. Detector pixel values responded linearly against exposure values (R2 0.999). As before, above 6 cycles/mm Mo/Mo MTF was slightly higher along the chest-nipple axis compared to the left-right axis. MTF was comparable to the previously reported prototype, with slightly reduced resolution. The DQE peaks ranged from 0.71 for 3.31 μC/kg (12.83 mR) to 0.4 for 0.48 μC/kg (1.86 mR) at 1.75 cycles/mm for Mo/Mo at 28 kVp. The DQE range for W/Rh at 28 kVP was 0.81 at 2.03 μC/kg (7.87 mR) to 0.50 at 0.50 μC/kg (1.94 mR) at 1 cycle/mm. NNPS tended to increase with greater exposures, while all exposures had a significant low-frequency component. Bloom and detector edge artifacts observed previously were no longer present in this prototype. The new detector shows marked noise improvement, with slightly reduced resolution. There remain artifacts due to imperfect gain calibration, but at a reduced magnitude compared to a prototype detector.

Use of artificial intelligence techniques for visual inspection systems prototyping. Application to magnetoscopy

International Nuclear Information System (INIS)

Pallas, Christophe

1987-01-01

The automation of visual inspection is a complex task that requires collaboration between experts, for example inspection specialist, vision specialist. on-line operators. Solving such problems through prototyping promotes this collaboration: the use of a non specific programming environment allows rapid, concrete checking of method validity, thus leading incrementally to the final system. In this context, artificial intelligence techniques permit easy, extensible, and modular design of the prototype, together with heuristic solution building. We define and achieve the SPOR prototyping environment, based on object-oriented programming and rules-basis managing. The feasibility and the validity of an heuristic method for automated visual inspection in fluoroscopy have been proved through prototyping in SPOR. (author) [fr

Adding Learning to Knowledge-Based Systems: Taking the "Artificial" Out of AI

Science.gov (United States)

Daniel L. Schmoldt

1997-01-01

Both, knowledge-based systems (KBS) development and maintenance require time-consuming analysis of domain knowledge. Where example cases exist, KBS can be built, and later updated, by incorporating learning capabilities into their architecture. This applies to both supervised and unsupervised learning scenarios. In this paper, the important issues for learning systems-...

Development of prototype DC superconducting cable for railway system

International Nuclear Information System (INIS)

Tomita, Masaru; Fukumoto, Yusuke; Suzuki, Kenji; Miryala, Muralidhar

2010-01-01

High Temperature Superconducting (HTSC) wire has significant potential for railway system applications. HTSC wire is currently a promising candidate for various engineering applications such as transformers and motors for railway system. HTSC direct current (DC) cable is ideal for a feeder of the overhead contact line system between the substation and the electric train. We completed a prototype Bi-2223 tape based direct current cable for trial purposes of several meters length. In the energizing experiment the current of 1720 A successfully constantly flew.

A knowledge based system for training radiation emergency response personnel

International Nuclear Information System (INIS)

Kuriakose, K.K.; Peter, T.U.; Natarajan, A.

1992-01-01

One of the important aspects of radiation emergency preparedness is to impart training to emergency handling staff. Mock exercises are generally used for this purpose. But practical considerations limit the frequency of such exercises. A suitably designed computer software can be effectively used to impart training. With the advent of low cost personal computers, the frequency with which the training programme can be conducted is unlimited. A computer software with monotonic behaviour is inadequate for such training. It is necessary to provide human like tutoring capabilities. With the advances in knowledge based computer systems, it is possible to develop such a system. These systems have the capability of providing individualized training. This paper describes the development of such a system for training and evaluation of agencies associated with the management of radiation emergency. It also discusses the utility of the software as a general purpose tutor. The details required for the preparation of data files and knowledge base files are included. It uses a student model based on performance measures. The software is developed in C under MS-DOS. It uses a rule based expert system shell developed in C. The features of this shell are briefly described. (author). 5 refs

Development of a component centered fault monitoring and diagnosis knowledge based system for space power system

Science.gov (United States)

Lee, S. C.; Lollar, Louis F.

1988-01-01

The overall approach currently being taken in the development of AMPERES (Autonomously Managed Power System Extendable Real-time Expert System), a knowledge-based expert system for fault monitoring and diagnosis of space power systems, is discussed. The system architecture, knowledge representation, and fault monitoring and diagnosis strategy are examined. A 'component-centered' approach developed in this project is described. Critical issues requiring further study are identified.

An ebCMOS camera system for marine bioluminescence observation: The LuSEApher prototype

Energy Technology Data Exchange (ETDEWEB)

Dominjon, A., E-mail: a.dominjon@ipnl.in2p3.fr [CNRS/IN2P3, Institut de Physique Nucleaire de Lyon, Villeurbanne F-69622 (France); Ageron, M. [CNRS/IN2P3, Centre de Physique des Particules de Marseille, Marseille, F-13288 (France); Barbier, R. [CNRS/IN2P3, Institut de Physique Nucleaire de Lyon, Villeurbanne F-69622 (France); Universite de Lyon, Universite Lyon 1, Lyon F-69003 (France); Billault, M.; Brunner, J. [CNRS/IN2P3, Centre de Physique des Particules de Marseille, Marseille, F-13288 (France); Cajgfinger, T. [CNRS/IN2P3, Institut de Physique Nucleaire de Lyon, Villeurbanne F-69622 (France); Universite de Lyon, Universite Lyon 1, Lyon F-69003 (France); Calabria, P. [CNRS/IN2P3, Institut de Physique Nucleaire de Lyon, Villeurbanne F-69622 (France); Chabanat, E. [CNRS/IN2P3, Institut de Physique Nucleaire de Lyon, Villeurbanne F-69622 (France); Universite de Lyon, Universite Lyon 1, Lyon F-69003 (France); Chaize, D.; Doan, Q.T.; Guerin, C.; Houles, J.; Vagneron, L. [CNRS/IN2P3, Institut de Physique Nucleaire de Lyon, Villeurbanne F-69622 (France)

2012-12-11

The ebCMOS camera, called LuSEApher, is a marine bioluminescence recorder device adapted to extreme low light level. This prototype is based on the skeleton of the LUSIPHER camera system originally developed for fluorescence imaging. It has been installed at 2500 m depth off the Mediterranean shore on the site of the ANTARES neutrino telescope. The LuSEApher camera is mounted on the Instrumented Interface Module connected to the ANTARES network for environmental science purposes (European Seas Observatory Network). The LuSEApher is a self-triggered photo detection system with photon counting ability. The presentation of the device is given and its performances such as the single photon reconstruction, noise performances and trigger strategy are presented. The first recorded movies of bioluminescence are analyzed. To our knowledge, those types of events have never been obtained with such a sensitivity and such a frame rate. We believe that this camera concept could open a new window on bioluminescence studies in the deep sea.

A Model to Assess the Behavioral Impacts of Consultative Knowledge Based Systems.

Science.gov (United States)

Mak, Brenda; Lyytinen, Kalle

1997-01-01

This research model studies the behavioral impacts of consultative knowledge based systems (KBS). A study of graduate students explored to what extent their decisions were affected by user participation in updating the knowledge base; ambiguity of decision setting; routinization of usage; and source credibility of the expertise embedded in the…

The Research of Clinical Decision Support System Based on Three-Layer Knowledge Base Model

Directory of Open Access Journals (Sweden)

Yicheng Jiang

2017-01-01

Full Text Available In many clinical decision support systems, a two-layer knowledge base model (disease-symptom of rule reasoning is used. This model often does not express knowledge very well since it simply infers disease from the presence of certain symptoms. In this study, we propose a three-layer knowledge base model (disease-symptom-property to utilize more useful information in inference. The system iteratively calculates the probability of patients who may suffer from diseases based on a multisymptom naive Bayes algorithm, in which the specificity of these disease symptoms is weighted by the estimation of the degree of contribution to diagnose the disease. It significantly reduces the dependencies between attributes to apply the naive Bayes algorithm more properly. Then, the online learning process for parameter optimization of the inference engine was completed. At last, our decision support system utilizing the three-layer model was formally evaluated by two experienced doctors. By comparisons between prediction results and clinical results, our system can provide effective clinical recommendations to doctors. Moreover, we found that the three-layer model can improve the accuracy of predictions compared with the two-layer model. In light of some of the limitations of this study, we also identify and discuss several areas that need continued improvement.

A knowledge based on-line diagnostic system for the fast breeder reactor KNKII

International Nuclear Information System (INIS)

Eggert, H.; Scherer, K.P.; Stiller, P.

1989-01-01

In the nuclear research center at Karlsruhe, a diagnostic expert system is developed to supervise a fast breeder process (KNKII). The problem is to detect critical phases in the beginning state before fault propagation. The expert system itself is integrated in a computer network (realized by a local area network), where different computers are involved as special detection systems (for example acoustic noise, temperature noise, covergas monitoring and so on), which produce partial diagnoses, based on intelligent signal processing techniques like pattern recognition. Additional to the detection systems a process computer is integrated as well as a test computer, which simulates hypothetical and real fault data. On the logical top level the expert system manages the partial diagnoses of the detection systems with the operating data of the process computer and to produce a final diagnosis including the explanation part for operator support. The knowledge base is developed by typical Artificial Intelligence tools. Both fact based and rule based knowledge representations are stored in form of flavors and predications. The inference engine operates on a rule based approach. Specific detail knowledge, based on experience about any years, is available to influence the decision process by increasing or decreasing of the generated hypotheses. In a meta knowledge base, a rule master triggers the special domain experts and contributes the tasks to the specific rule complexes. Such a system management guarantees a problem solving strategy, which operates event triggered and situation specific in a local inference domain. (author). 3 refs, 6 figs, 2 tabs

Development and testing of a prototype NPP information system based on the G2 expert system shell

International Nuclear Information System (INIS)

Vegh, J.; Bodnar, M.; Brueger, L.; Tanyi, M.; Sefcsik, F.

1994-01-01

The components and functioning of the GPCS information system is described as applied for process monitoring and alarm generation in WWER-440 type nuclear power plant. The prototype system was developed by using the G2 real-time expert system shell, measurements were simulated by a WWER-440 compact simulator and by the archive replay of a core monitoring system. The benefits of the object oriented technology description, expert system approach and information integration are emphasized. (author) 21 refs.; 17 figs

The architecture and prototype implementation of the Model Environment system

Science.gov (United States)

Donchyts, G.; Treebushny, D.; Primachenko, A.; Shlyahtun, N.; Zheleznyak, M.

2007-01-01

An approach that simplifies software development of the model based decision support systems for environmental management has been introduced. The approach is based on definition and management of metadata and data related to computational model without losing data semantics and proposed methods of integration of the new modules into the information system and their management. An architecture of the integrated modelling system is presented. The proposed architecture has been implemented as a prototype of integrated modelling system using. NET/Gtk{#} and is currently being used to re-design European Decision Support System for Nuclear Emergency Management RODOS (http://www.rodos.fzk.de) using Java/Swing.

Experiments in Knowledge Refinement for a Large Rule-Based System

Science.gov (United States)

1993-08-01

empirical analysis to refine expert system knowledge bases. Aritificial Intelligence , 22:23-48, 1984. *! ...The Addison- Weslev series in artificial intelligence . Addison-Weslev. Reading, Massachusetts. 1981. Cooke, 1991: ttoger M. Cooke. Experts in...ment for classification systems. Artificial Intelligence , 35:197-226, 1988. 14 Overall, we believe that it will be possible to build a heuristic system

Development and Testing of a Prototype Grid-Tied Photovoltaic Power System

Science.gov (United States)

Eichenberg, Dennis J.

2009-01-01

The NASA Glenn Research Center (GRC) has developed and tested a prototype 2 kW DC grid-tied photovoltaic (PV) power system at the Center. The PV system has generated in excess of 6700 kWh since operation commenced in July 2006. The PV system is providing power to the GRC grid for use by all. Operation of the prototype PV system has been completely trouble free. A grid-tied PV power system is connected directly to the utility distribution grid. Facility power can be obtained from the utility system as normal. The PV system is synchronized with the utility system to provide power for the facility, and excess power is provided to the utility. The project transfers space technology to terrestrial use via nontraditional partners. GRC personnel glean valuable experience with PV power systems that are directly applicable to various space power systems, and provide valuable space program test data. PV power systems help to reduce harmful emissions and reduce the Nation s dependence on fossil fuels. Power generated by the PV system reduces the GRC utility demand, and the surplus power aids the community. Present global energy concerns reinforce the need for the development of alternative energy systems. Modern PV panels are readily available, reliable, efficient, and economical with a life expectancy of at least 25 years. Modern electronics has been the enabling technology behind grid-tied power systems, making them safe, reliable, efficient, and economical with a life expectancy of at least 25 years. Based upon the success of the prototype PV system, additional PV power system expansion at GRC is under consideration. The prototype grid-tied PV power system was successfully designed and developed which served to validate the basic principles described, and the theoretical work that was performed. The report concludes that grid-tied photovoltaic power systems are reliable, maintenance free, long life power systems, and are of significant value to NASA and the community.

Robotic Transnasal Endoscopic Skull Base Surgery: Systematic Review of the Literature and Report of a Novel Prototype for a Hybrid System (Brescia Endoscope Assistant Robotic Holder).

Science.gov (United States)

Bolzoni Villaret, Andrea; Doglietto, Francesco; Carobbio, Andrea; Schreiber, Alberto; Panni, Camilla; Piantoni, Enrico; Guida, Giovanni; Fontanella, Marco Maria; Nicolai, Piero; Cassinis, Riccardo

2017-09-01

Although robotics has already been applied to several surgical fields, available systems are not designed for endoscopic skull base surgery (ESBS). New conception prototypes have been recently described for ESBS. The aim of this study was to provide a systematic literature review of robotics for ESBS and describe a novel prototype developed at the University of Brescia. PubMed and Scopus databases were searched using a combination of terms, including Robotics OR Robot and Surgery OR Otolaryngology OR Skull Base OR Holder. The retrieved papers were analyzed, recording the following features: interface, tools under robotic control, force feedback, safety systems, setup time, and operative time. A novel hybrid robotic system has been developed and tested in a preclinical setting at the University of Brescia, using an industrial manipulator and readily available off-the-shelf components. A total of 11 robotic prototypes for ESBS were identified. Almost all prototypes present a difficult emergency management as one of the main limits. The Brescia Endoscope Assistant Robotic holder has proven the feasibility of an intuitive robotic movement, using the surgeon's head position: a 6 degree of freedom sensor was used and 2 light sources were added to glasses that were therefore recognized by a commercially available sensor. Robotic system prototypes designed for ESBS and reported in the literature still present significant technical limitations. Hybrid robot assistance has a huge potential and might soon be feasible in ESBS. Copyright © 2017 Elsevier Inc. All rights reserved.

A prototype switched Ethernet data acquisition system

International Nuclear Information System (INIS)

Ye Gaoying; Deng Huichen; Chen Liaoyuan; Liu Li; Wang Xinhui

1999-01-01

A prototype switched Ethernet data acquisition system has been built up and successfully operated in HL-1M tokamak experiments. The system is based on a switched high bandwidth Ethernet network with which the CAMAC crates are directly interfaced. It takes the advanced features of LAN switch and Ethernet CAMAC controller (ECC 1365 MK III, HYTEC product) to avoid the rewriting of CAMAC driver for an individual computer system and to ensure high data transmission rate between CAMAC system and host computers on the network. It is a new approach to DAS system architecture and provides a solution for a well-known bottleneck problem in traditional distributed DAS system for fusion research. An average throughput of the test system reaches over 100 Mbps. The system features also an easy and low cost migration from traditional distributed DAS system. In the paper, the hardware configuration, software structure, performance of the system and the method of migrating from current DAS system are discussed in detail. (orig.)

A method of knowledge base verification for nuclear power plant expert systems using extended Petri Nets

International Nuclear Information System (INIS)

Kwon, I. W.; Seong, P. H.

1996-01-01

The adoption of expert systems mainly as operator supporting systems is becoming increasingly popular as the control algorithms of system become more and more sophisticated and complicated. The verification phase of knowledge base is an important part for developing reliable expert systems, especially in nuclear industry. Although several strategies or tools have been developed to perform potential error checking, they often neglect the reliability of verification methods. Because a Petri net provides a uniform mathematical formalization of knowledge base, it has been employed for knowledge base verification. In this work, we devise and suggest an automated tool, called COKEP(Checker of Knowledge base using Extended Petri net), for detecting incorrectness, inconsistency, and incompleteness in a knowledge base. The scope of the verification problem is expended to chained errors, unlike previous studies that assume error incidence to be limited to rule pairs only. In addition, we consider certainty factor in checking, because most of knowledge bases have certainly factors. 8 refs,. 2 figs,. 4 tabs. (author)

Development of an integrated knowledge-base and its management tool for computerized alarm processing system

International Nuclear Information System (INIS)

Heo, Gyun Young; Choi, Seong Soo; Kim, Han Gon; Chang, Soon Heung

1997-01-01

For a long time, a number of alarm processing techniques have been researched to reduce the number of actuated alarms for operators to deal with effectively during the abnormal as well as the normal conditions. However, the strategy that the only systems with a few clear technologies should be used as a part of an alarm annunciation system has been adopted considering the effectiveness and the reliability in actual alarm processing systems. Therefore, alarm processing systems have difficult knowledge-base maintenance problems and limited expansion or enhancement defects. To solve these shortcomings, the integrated knowledge-base which can express the general information related to all the alarm processing techniques is proposed and its management tool, Knowledge Input Tool for Alarm (KIT-A) which can handle the data of the knowledge-base efficiently is developed. Since the integrated knowledge-base with KIT-A can manipulate all the alarm information without the modification of alarm processing system itself, it is expected to considerably advance the overall capability of maintenance and enhancement of the alarm processing systems

Linear time relational prototype based learning.

Science.gov (United States)

Gisbrecht, Andrej; Mokbel, Bassam; Schleif, Frank-Michael; Zhu, Xibin; Hammer, Barbara

2012-10-01

Prototype based learning offers an intuitive interface to inspect large quantities of electronic data in supervised or unsupervised settings. Recently, many techniques have been extended to data described by general dissimilarities rather than Euclidean vectors, so-called relational data settings. Unlike the Euclidean counterparts, the techniques have quadratic time complexity due to the underlying quadratic dissimilarity matrix. Thus, they are infeasible already for medium sized data sets. The contribution of this article is twofold: On the one hand we propose a novel supervised prototype based classification technique for dissimilarity data based on popular learning vector quantization (LVQ), on the other hand we transfer a linear time approximation technique, the Nyström approximation, to this algorithm and an unsupervised counterpart, the relational generative topographic mapping (GTM). This way, linear time and space methods result. We evaluate the techniques on three examples from the biomedical domain.

A knowledge-based computer system for assessing new company names

DEFF Research Database (Denmark)

Vidal, Rene Victor Valqui; Thorsen, M.

1990-01-01

This paper briefly describes a knowledge-based computer system implemented at the Registry of Companies (E and S), Ministry of Industries in Denmark. The system helps E and S, on receipt of a request for registration of a new or changed company name, to check the name for acceptability. The check...

Development of knowledge-based operator support system for steam generator water leak events in FBR plants

International Nuclear Information System (INIS)

Arikawa, Hiroshi; Ida, Toshio; Matsumoto, Hiroyuki; Kishida, Masako

1991-01-01

A knowledge engineering approach to operation support system would be useful in maintaining safe and steady operation in nuclear plants. This paper describes a knowledge-based operation support system which assists the operators during steam generator water leak events in FBR plants. We have developed a real-time expert system. The expert system adopts hierarchical knowledge representation corresponding to the 'plant abnormality model'. A technique of signal validation which uses knowledge of symptom propagation are applied to diagnosis. In order to verify the knowledge base concerning steam generator water leak events in FBR plants, a simulator is linked to the expert system. It is revealed that diagnosis based on 'plant abnormality model' and signal validation using knowledge of symptom propagation could work successfully. Also, it is suggested that the expert system could be useful in supporting FBR plants operations. (author)

MAPI's knowledge-based system will help to deal with abnormal conditions (in nuclear plants)

International Nuclear Information System (INIS)

Anon.

1987-01-01

Mitsubishi Atomic Power Industries (MAPI) in Japan is incorporating artificial intelligence characteristics into a system for guiding nuclear power plant operators during fault conditions. The central feature of the system is the incorporation of the operator's cognitive processes as the framework for its display of information and its mode of reasoning. A small scale prototype system has been developed and work is underway to produce and test a full-scale prototype system by 1991. (UK)

Interorganizational Knowledge Division Decision Model Based on Cooperative Innovation of Supply Chain System

Directory of Open Access Journals (Sweden)

Wei Zhang

2014-01-01

Full Text Available Within interorganizational cooperative innovation of construction supply chain system, the achievement of project value-adding could be reflected by several factors, such as project-based organizational effect level, and the relationship between project cooperative innovation objectives. In this paper, based on the assumption of equal cooperation between project-based organizations, we selected the knowledge cooperation between the owner and contractor in construction supply chain system as research object. From the perspective of maximizing project value-adding and the relationship of effort cost between knowledge input and innovation stage in consideration, we established the knowledge collaborative incentive model for interorganizational cooperative innovation of construction supply chain system and proposed the first-order and second-order approaches. Then we conducted the digital simulation and example analysis, its results showed that if the owner has the capability to achieve project value-adding in knowledge cooperation, he would adopt a part commissioned way. Otherwise, a fully commissioned way would be better.

A Study on Satellite Diagnostic Expert Systems Using Case-Based Approach

Directory of Open Access Journals (Sweden)

Young-Tack Park

1997-06-01

Full Text Available Many research works are on going to monitor and diagnose diverse malfunctions of satellite systems as the complexity and number of satellites increase. Currently, many works on monitoring and diagnosis are carried out by human experts but there are needs to automate much of the routine works of them. Hence, it is necessary to study on using expert systems which can assist human experts routine work by doing automatically, thereby allow human experts devote their expertise more critical and important areas of monitoring and diagnosis. In this paper, we are employing artificial intelligence techniques to model human experts' knowledge and inference the constructed knowledge. Especially, case-based approaches are used to construct a knowledge base to model human expert capabilities which use previous typical exemplars. We have designed and implemented a prototype case-based system for diagnosing satellite malfunctions using cases. Our system remembers typical failure cases and diagnoses a current malfunction by indexing the case base. Diverse methods are used to build a more user friendly interface which allows human experts can build a knowledge base in as easy way.

Activity Based Startup Plan for Prototype Vertical Denitration Calciner

International Nuclear Information System (INIS)

SUTTER, C.S.

1999-01-01

Testing activation on the Prototype Vertical Denitration Calciner at PFP were suspended in January 1997 due to the hold on fissile material handling in the facility. The restart of testing activities will require a review through an activity based startup process based upon Integrated Safety Management (ISM) principles to verify readiness. The Activity Based Startup Plan for the Prototype vertical Denitration Calciner has been developed for this process

An intelligent knowledge-based and customizable home care system framework with ubiquitous patient monitoring and alerting techniques.

Science.gov (United States)

Chen, Yen-Lin; Chiang, Hsin-Han; Yu, Chao-Wei; Chiang, Chuan-Yen; Liu, Chuan-Ming; Wang, Jenq-Haur

2012-01-01

This study develops and integrates an efficient knowledge-based system and a component-based framework to design an intelligent and flexible home health care system. The proposed knowledge-based system integrates an efficient rule-based reasoning model and flexible knowledge rules for determining efficiently and rapidly the necessary physiological and medication treatment procedures based on software modules, video camera sensors, communication devices, and physiological sensor information. This knowledge-based system offers high flexibility for improving and extending the system further to meet the monitoring demands of new patient and caregiver health care by updating the knowledge rules in the inference mechanism. All of the proposed functional components in this study are reusable, configurable, and extensible for system developers. Based on the experimental results, the proposed intelligent homecare system demonstrates that it can accomplish the extensible, customizable, and configurable demands of the ubiquitous healthcare systems to meet the different demands of patients and caregivers under various rehabilitation and nursing conditions.

An Intelligent Knowledge-Based and Customizable Home Care System Framework with Ubiquitous Patient Monitoring and Alerting Techniques

Directory of Open Access Journals (Sweden)

Yen-Lin Chen

2012-08-01

Full Text Available This study develops and integrates an efficient knowledge-based system and a component-based framework to design an intelligent and flexible home health care system. The proposed knowledge-based system integrates an efficient rule-based reasoning model and flexible knowledge rules for determining efficiently and rapidly the necessary physiological and medication treatment procedures based on software modules, video camera sensors, communication devices, and physiological sensor information. This knowledge-based system offers high flexibility for improving and extending the system further to meet the monitoring demands of new patient and caregiver health care by updating the knowledge rules in the inference mechanism. All of the proposed functional components in this study are reusable, configurable, and extensible for system developers. Based on the experimental results, the proposed intelligent homecare system demonstrates that it can accomplish the extensible, customizable, and configurable demands of the ubiquitous healthcare systems to meet the different demands of patients and caregivers under various rehabilitation and nursing conditions.

An assessment of maintainability of elevator system to improve facilities management knowledge-base

Science.gov (United States)

Siti, N. A.; Asmone, A. S.; Chew, M. Y. L.

2018-02-01

Elevator system is a highly specialized machinery that requires technicians that have a wider array of knowledge in maintaining the system to be safe and reliable. While attaining reliable data of elevator malfunction become challenges, this study has filled the gap by gathering the management-maintenance issues and operational defects of elevator system. Forty-three types of operation defects were found and the consequence defects and their possible causes of occurrences were discussed. To respond to the prime challenges of maintaining elevator system provided by the industry players’ perspective, a theoretical framework is established as a recommendation to improve knowledge base of defects in elevator system which comprises good practices, and solutions to rectify each defects found. Hence, this research paper has theoretically improved the knowledge base of maintainability of elevator system and provide meaningful guidelines in practical senses to the industry professionals.

Knowledge based operation assist system for JAERI AVF cyclotron

International Nuclear Information System (INIS)

Agematsu, T.; Okumura, S.; Yokota, W.; Arakawa, K.; Murakami, T.; Okamura, T.

1992-01-01

We have developed two operation assist systems for easy and rapid operation of the JAERI AVF cyclotron. One is a knowledge based expert system guiding the sequence of parameter adjustment to inexperienced cyclotron operators. The other is a real-time simulation of the beam trajectories which are calculated from actual operating parameters. It graphically indicates feasible setting range of parameters that satisfies the acceptance of the cyclotron. These systems provide a human interface to adjust the parameters of the cyclotron. (author)

Physical Layer Multi-Core Prototyping A Dataflow-Based Approach for LTE eNodeB

CERN Document Server

Pelcat, Maxime; Piat, Jonathan; Nezan, Jean-François

2013-01-01

Base stations developed according to the 3GPP Long Term Evolution (LTE) standard require unprecedented processing power. 3GPP LTE enables data rates beyond hundreds of Mbits/s by using advanced technologies, necessitating a highly complex LTE physical layer. The operating power of base stations is a significant cost for operators, and is currently optimized using state-of-the-art hardware solutions, such as heterogeneous distributed systems. The traditional system design method of porting algorithms to heterogeneous distributed systems based on test-and-refine methods is a manual, thus time-expensive, task.   Physical Layer Multi-Core Prototyping: A Dataflow-Based Approach for LTE eNodeB provides a clear introduction to the 3GPP LTE physical layer and to dataflow-based prototyping and programming. The difficulties in the process of 3GPP LTE physical layer porting are outlined, with particular focus on automatic partitioning and scheduling, load balancing and computation latency reduction, specifically in sys...

Development of a GIS-Based Decision Support System for Diagnosis of River System Health and Restoration

Directory of Open Access Journals (Sweden)

Jihong Xia

2014-10-01

Full Text Available The development of a decision support system (DSS to inform policy making has been progressing rapidly. This paper presents a generic framework and the development steps of a decision tool prototype of geographic information systems (GIS-based decision support system of river health diagnosis (RHD-DSS. This system integrates data, calculation models, and human knowledge of river health status assessment, causal factors diagnosis, and restoration decision making to assist decision makers during river restoration and management in Zhejiang Province, China. Our RHD-DSS is composed of four main elements: the graphical user interface (GUI, the database, the model base, and the knowledge base. It has five functional components: the input module, the database management, the diagnostic indicators management, the assessment and diagnosis, and the visual result module. The system design is illustrated with particular emphasis on the development of the database, model schemas, diagnosis and analytical processing techniques, and map management design. Finally, the application of the prototype RHD-DSS is presented and implemented for Xinjiangtang River of Haining County in Zhejiang Province, China. This case study is used to demonstrate the advantages gained by the application of this system. We conclude that there is great potential for using the RHD-DSS to systematically manage river basins in order to effectively mitigate environmental issues. The proposed approach will provide river managers and designers with improved insight into river degradation conditions, thereby strengthening the assessment process and the administration of human activities in river management.

MOVES: A knowledge-based system for maintenance planning for motor-operated valves

International Nuclear Information System (INIS)

Winter, M.

1987-01-01

Over the past several years, knowledge-based expert systems have emerged as an important part of the general research area known as artificial intelligence. This paper describes a cooperative effort between faculty members at Iowa State University and engineers at the Duane Arnold Energy Center [a 545-MW(electric) boiling water reactor operated by Iowa Electric Light and Power Company] to explore the development of an advisory system for valve maintenance planning. This knowledge-based program, known as Motor-Operated Valves Expert System (MOVES), has a data base that currently includes safety-related motor-operated valves (∼117 valves). Valve maintenance was selected as the subject for the expert system because of the importance of valves in nuclear plant and their impact of plant availability. MOVES is being developed using the microcomputer-(IBM compatible) based expert system tool INSIGHT2+. The authors have found that the project benefits both the university and the utility

A Knowledge Based Recommender System with Multigranular Linguistic Information

Directory of Open Access Journals (Sweden)

Luis Martinez

2008-08-01

Full Text Available Recommender systems are applications that have emerged in the e-commerce area in order to assist users in their searches in electronic shops. These shops usually offer a wide range of items that cover the necessities of a great variety of users. Nevertheless, searching in such a wide range of items could be a very difficult and time-consuming task. Recommender systems assist users to find out suitable items by means of recommendations based on information provided by different sources such as: other users, experts, item features, etc. Most of the recommender systems force users to provide their preferences or necessities using an unique numerical scale of information fixed in advance. In spite of this information is usually related to opinions, tastes and perceptions, therefore, it seems that is usually better expressed in a qualitative way, with linguistic terms, than in a quantitative way, with precise numbers. We propose a Knowledge Based Recommender System that uses the fuzzy linguistic approach to define a flexible framework to capture the uncertainty of the user's preferences. Thus, this framework will allow users to express their necessities in scales closer to their own knowledge, and different from the scale utilized to describe the items.

CO2 Laser-Based Rapid Prototyping of Micropumps

Directory of Open Access Journals (Sweden)

Zachary Strike

2018-05-01

Full Text Available The fabrication of microdevices for fluidic control often requires the use of flexible diaphragms in a way that requires cleanroom equipment and compromises performance. We use a CO 2 laser to perform the standard ablative techniques of cutting and engraving materials, but we also apply a method that we call laser placement. This allows us to fabricate precisely-positioned and precisely-sized, isolated diaphragms. This in turn enables the rapid prototyping of integrated multilayer microfluidic devices to form complex structures without the need for manual positioning or cleanroom equipment. The fabrication process is also remarkably rapid and capable of being scaled to manufacturing levels of production. We explore the use of these devices to construct a compact system of peristaltic pumps that can form water in oil droplets without the use of the non-pulsatile pumping systems typically required. Many devices can be fabricated at a time on a sheet by sheet basis with a fabrication process that, to our knowledge, is the fastest reported to date for devices of this type (requiring only 3 h. Moreover, this system is unusually compact and self-contained.

Understanding images using knowledge based approach

International Nuclear Information System (INIS)

Tascini, G.

1985-01-01

This paper presents an approach to image understanding focusing on low level image processing and proposes a rule-based approach as part of larger knowledge-based system. The general system has a yerarchical structure that comprises several knowledge-based layers. The main idea is to confine at the lower level the domain independent knowledge and to reserve the higher levels for the domain dependent knowledge, that is for the interpretation

Design and prototyping of real-time systems using CSP and CML

DEFF Research Database (Denmark)

Rischel, Hans; Sun, Hong Yan

1997-01-01

A procedure for systematic design of event based systems is introduced by means of the Production Cell case study. The design is documented by CSP style processes, which allow both verification using formal techniques and also validation of a rapid prototype in the functional language CML...

Role of Knowledge Based Communities in Knowledge Process

Directory of Open Access Journals (Sweden)

Sebastian Ion CEPTUREANU

2015-12-01

Full Text Available In the new economy, knowledge is an essential component of economic and social systems. The organizational focus has to be on building knowledge-based management, development of human resource and building intellectual capital capabilities. Knowledge-based management is defined, at company level, by economic processes that emphasize creation, selling, buying, learning, storing, developing, sharing and protection of knowledge as a decisive condition for profit and long-term sustainability of the company. Hence, knowledge is, concurently, according to a majoritiy of specialists, raw material, capital, product and an essential input. Knowledge-based communities are one of the main constituent elements of a framework for knowledge based management. These are peer networks consisting of practitioners within an organization, supporting each other to perform better through the exchange and sharing of knowledge. Some large companies have contributed or supported the establishment of numerous communities of practice, some of which may have several thousand members. They operate in different ways, are of different sizes, have different areas of interest and addresses knowledge at different levels of its maturity. This article examines the role of knowledge-based communities from the perspective of knowledge based management, given that the arrangements for organizational learning, creating, sharing, use of knowledge within organizations become more heterogeneous and take forms more difficult to predict by managers and specialists.

JACOS: AI-based simulation system for man-machine system behavior in NPP

International Nuclear Information System (INIS)

Yoshida, Kazuo; Yokobayashi, Masao; Tanabe, Fumiya; Komiya, Akitoshi

2001-08-01

A prototype of a computer simulation system named JACOS (JAERI COgnitive Simulation system) has been developed at JAERI (Japan Atomic Energy Research Institute) to simulate the man-machine system behavior in which both the cognitive behavior of a human operator and the plant behavior affect each other. The objectives of this system development is to provide man-machine system analysts with detailed information on the cognitive process of an operator and the plant behavior affected by operator's actions in accidental situations of a nuclear power plant. The simulation system consists of an operator model and a plant model which are coupled dynamically. The operator model simulates an operator's cognitive behavior in accidental situations based on the decision ladder model of Rasmussen, and is implemented using the AI-techniques of the distributed cooperative inference method with the so-called blackboard architecture. Rule-based behavior is simulated using knowledge representation with If-Then type of rules. Knowledge-based behavior is simulated using knowledge representation with MFM (Multilevel Flow Modeling) and qualitative reasoning method. Cognitive characteristics of attentional narrowing, limitation of short-term memory, and knowledge recalling from long-term memory are also taken into account. The plant model of a 3-loop PWR is also developed using a best estimate thermal-hydraulic analysis code RELAP5/MOD2. This report is prepared as User's Manual for JACOS. The first chapter of this report describes both operator and plant models in detail. The second chapter includes instructive descriptions for program installation, building of a knowledge base for operator model, execution of simulation and analysis of simulation results. The examples of simulation with JACOS are shown in the third chapter. (author)

Flight Telerobotic Servicer prototype simulator

Science.gov (United States)

Schein, Rob; Krauze, Linda; Hartley, Craig; Dickenson, Alan; Lavecchia, Tom; Working, Bob

A prototype simulator for the Flight Telerobotic Servicer (FTS) system is described for use in the design development of the FTS, emphasizing the hand controller and user interface. The simulator utilizes a graphics workstation based on rapid prototyping tools for systems analyses of the use of the user interface and the hand controller. Kinematic modeling, manipulator-control algorithms, and communications programs are contained in the software for the simulator. The hardwired FTS panels and operator interface for use on the STS Orbiter are represented graphically, and the simulated controls function as the final FTS system configuration does. The robotic arm moves based on the user hand-controller interface, and the joint angles and other data are given on the prototype of the user interface. This graphics simulation tool provides the means for familiarizing crewmembers with the FTS system operation, displays, and controls.

Knowledge assistant for robotic environmental characterization

International Nuclear Information System (INIS)

Feddema, J.; Rivera, J.; Tucker, S.; Matek, J.

1996-08-01

A prototype sensor fusion framework called the open-quotes Knowledge Assistantclose quotes has been developed and tested on a gantry robot at Sandia National Laboratories. This Knowledge Assistant guides the robot operator during the planning, execution, and post analysis stages of the characterization process. During the planning stage, the Knowledge Assistant suggests robot paths and speeds based on knowledge of sensors available and their physical characteristics. During execution, the Knowledge Assistant coordinates the collection of data through a data acquisition open-quotes specialist.close quotes During execution and postanalysis, the Knowledge Assistant sends raw data to other open-quotes specialists,close quotes which include statistical pattern recognition software, a neural network, and model-based search software. After the specialists return their results, the Knowledge Assistant consolidates the information and returns a report to the robot control system where the sensed objects and their attributes (e.g., estimated dimensions, weight, material composition, etc.) are displayed in the world model. This report highlights the major components of this system

Development of a knowledge-based system for the design of composite automotive components

Science.gov (United States)

Moynihan, Gary P.; Stephens, J. Paul

1997-01-01

Composite materials are comprised of two or more constituents possessing significantly different physical properties. Due to their high strength and light weight, there is an emerging trend to utilize composites in the automotive industry. There is an inherent link between component design and the manufacturing processes necessary for fabrication. To many designers, this situation may be intimidating, since there is frequently little available understanding of composites and their processes. A direct results is high rates of product scrap and rework. Thus, there is a need to implement a systematic approach to composite material design. One such approach is quality function deployment (QFD). By translating customer requirements into design parameters, through the use of heuristics, QFD supports the improvement of product quality during the planning stages prior to actual production. The purpose of this research is to automate the use of knowledge pertaining to the design and application of composite materials within the automobile industry. This is being accomplished through the development of a prototype expert system incorporating a QFD approach. It will provide industry designers with access to knowledge of composite materials that might not be otherwise available.

Dacfood: a knowledge-based system for decision support in case of radiological contamination of foodstuffs

International Nuclear Information System (INIS)

Diaz, A.; Despres, A.; Soulatges, D.

1991-01-01

In case of radiological contamination of foodstuffs, the introduction of a countermeasure has to be justified by balancing its advantages and drawbacks, as recommended by ICRP. Also, to provide authorities with information about the decision context, it has been decided to develop a Decision Support System (DSS). A knowledge-based approach is used for the DSS. Indeed, it allows: . better modelling thanks to, for instance, object oriented programming and rules, . ability to introduce more knowledge thanks to an easier consistency and validity control of the knowledge base, . handling of uncertainties (incomplete, uncertain or evolving knowledge). The present state of the system is presented. DACFOOD is a decision aiding system for contamined foodstuffs, based on a knowledge-based approach. A demonstration model has been developed in a post-Chernobyl CEC research program. It evaluates the sanitary situation, the alternative actions through costs and sanitary effects, and gives information on the decisional background

A knowledge based system for linking information to support decision making in construction

NARCIS (Netherlands)

Al-Jibouri, Saad H.S.; Mawdesley, Michael J.

2002-01-01

This work describes the development of a project model centred on the information and knowledge generated and used by managers. It describes a knowledge-based system designed for this purpose. A knowledge acquisition exercise was undertaken to determine the tasks of project managers and the

SIMS prototype system 4: Design data brochure

Science.gov (United States)

1978-01-01

A pre-package prototype unit having domestic hot water and room solar heating capability that uses air as the collector fluid is described. This system is designed to be used with a small single-family dwelling where a roof mounted collector array is not feasible. The prototype unit is an assemble containing 203 square feet of effective collector surface with 113 cubic feet of rock storage. The design of structure and storage is modular, which permits expansion and reduction of the collector array and storage bed in 68 square feet and 37 cubic feet increments respectively. The system is designed to be transportable. This permitted assemble and certification testing in one area and installation in another area without tear down and reassemble. Design, installation, operation, performance and maintenance of this system are described.

Knowledge-based personalized search engine for the Web-based Human Musculoskeletal System Resources (HMSR) in biomechanics.

Science.gov (United States)

Dao, Tien Tuan; Hoang, Tuan Nha; Ta, Xuan Hien; Tho, Marie Christine Ho Ba

2013-02-01

Human musculoskeletal system resources of the human body are valuable for the learning and medical purposes. Internet-based information from conventional search engines such as Google or Yahoo cannot response to the need of useful, accurate, reliable and good-quality human musculoskeletal resources related to medical processes, pathological knowledge and practical expertise. In this present work, an advanced knowledge-based personalized search engine was developed. Our search engine was based on a client-server multi-layer multi-agent architecture and the principle of semantic web services to acquire dynamically accurate and reliable HMSR information by a semantic processing and visualization approach. A security-enhanced mechanism was applied to protect the medical information. A multi-agent crawler was implemented to develop a content-based database of HMSR information. A new semantic-based PageRank score with related mathematical formulas were also defined and implemented. As the results, semantic web service descriptions were presented in OWL, WSDL and OWL-S formats. Operational scenarios with related web-based interfaces for personal computers and mobile devices were presented and analyzed. Functional comparison between our knowledge-based search engine, a conventional search engine and a semantic search engine showed the originality and the robustness of our knowledge-based personalized search engine. In fact, our knowledge-based personalized search engine allows different users such as orthopedic patient and experts or healthcare system managers or medical students to access remotely into useful, accurate, reliable and good-quality HMSR information for their learning and medical purposes. Copyright © 2012 Elsevier Inc. All rights reserved.

Course Ontology-Based User's Knowledge Requirement Acquisition from Behaviors within E-Learning Systems

Science.gov (United States)

Zeng, Qingtian; Zhao, Zhongying; Liang, Yongquan

2009-01-01

User's knowledge requirement acquisition and analysis are very important for a personalized or user-adaptive learning system. Two approaches to capture user's knowledge requirement about course content within an e-learning system are proposed and implemented in this paper. The first approach is based on the historical data accumulated by an…

Investigation of knowledge structure of nuclear data evaluation code

International Nuclear Information System (INIS)

Uenaka, Junji; Kambayashi, Shaw

1988-08-01

In this report, investigation results of knowledge structure in a nuclear data evaluation code are described. This investigation is related to the natural language processing and the knowledge base in the research theme of Human Acts Simulation Program (HASP) begun at the Computing Center of JAERI in 1987. By using a machine translation system, an attempt has been made to extract a deep knowledge from Japanese sentences which are equivalent to a FORTRAN program CASTHY for nuclear data evaluation. With the knowledge extraction method used by the authors, the verification of knowledge is more difficult than that of the prototyping method in an ordinary AI technique. In the early stage of building up a knowledge base system, it seems effective to extract and examine knowledge fragments of limited objects. (author)

SIMS Prototype System 4: performance test report

Energy Technology Data Exchange (ETDEWEB)

1978-10-09

The results obtained during testing of a self-contained, preassembled air type solar system, designed for installation remote from the dwelling, to provide space heating and hot water are presented. Data analysis is included which documents the system performance and verifies the suitability of SIMS Prototype System 4 for field installation.

A progress report of the switch-based data acquisition system prototype project and the application of switches from industry to high-energy physics event building

International Nuclear Information System (INIS)

Barsotti, E.; Booth, A.; Bowden, M.; Swoboda, C.

1990-01-01

A prototype of a data acquisition system based on a new scalable, highly-parallel, open-system architecture is being developed at Fermilab. The major component of the new architecture, the parallel event builder, is based on a telecommunications industry technique used in the implementation of switching systems, a barrel-shift switch. The architecture is scalable both in the expandability of the number of input channels and in the throughput of the system. Because of its scalability, the system is well suited for low to high-rate experiments, test beams and all SSC detectors. The architecture is open in that as new technologies are developed and made into commercial products (e.g., arrays of processors and workstations and standard data links), these new products can be easily integrated into the system with minimal system modifications and no modifications to the system's basic architecture. Scalability and openness should guarantee that the data acquisition system does not become obsolete during the lifetime of the experiment. The paper first gives a description of the architecture and the prototype project and then details both the prototype project's software and hardware status including details of some architecture simulation studies. Suggestions for future R and D work on the new data acquisition system architecture are then described. The paper concludes by examining interconnection networks from industry and their application to event building and to other areas of high-energy physics data acquisition systems

Intelligent Flowcharting Developmental Approach to Legal Knowledge Based System

Directory of Open Access Journals (Sweden)

Nitin Balaji Bilgi

2011-10-01

Full Text Available The basic aim of this research, described in this paper is to develop a hybrid legal expert system/ knowledge based system, with specific reference to the transfer of property act, within the Indian legal system which is often in demand. In this paper the authors discuss an traditional approach to combining two types of reasoning methodologies, Rule Based Reasoning (RBR and Case Based Reasoning (CBR. In RBR module we have interpreted and implemented rules that occur in legal statutes of the Transfer of property act. In the CBR module we have an implementation to find the related cases. The VisiRule software made available by Logic Programming Associates is used in the development of RBR part this expert system. The authors have used java Net Beans for development of CBR. VisiRule is a decision charting tool, in which the rules are defined by a combination of graphical shapes and pieces of text, and produces rules.

SU-E-T-66: A Prototype for Couch Based Real-Time Dosimetry in External Beam Radiotherapy

Energy Technology Data Exchange (ETDEWEB)

Ramachandran, P [Peter MacCallum Cancer Centre, Bendigo (Australia)

2015-06-15

Purpose: The main purpose of this study is to design a prototype for couch-based based real time dosimetry system in external beam radiotherapy Methods: A prototype of 100 ionization chambers was designed on a printed circuit board by etching the copper layer and each ionization chamber was wired to a 50 pin connector. The signals from the two 50 pin connectors collected from the ionization chambers were then transferred to a PXI module from National Instruments. The PXI module houses a current amplifier that amplifies the charge collected from the ionization chamber. The amplified signal is then sent to a digital multimeter module for converting the analog signal to digital signal. A software was designed in labview to read and display the signals obtained from the PXI module. A couch attachment frame was designed to house the 100 ionization chamber module. The frame was fixed underneath the treatment couch for measuring the dose during treatment. Resutls: The ionization chamber based prototype dosimetry was tested for simple radiotherapy treatment fields and found to be a useful device for measuring real time dosimetry at the treatment couch plane. This information could be used to assess the delivered dose to a patient during radiotherapy. It could be used as an invivo dosimeter during radiotherapy. Conclusion: In this study, a prototype for couch based real time dosimetry system was designed and tested. The prototype forms a basis for the development of large scale couch based real time dosimetry system that could be used to perform morning QA prior to treatment, assess real time doses delivered to patient and as a device to monitor the output of the treatment beam. Peter MacCallum Cancer Foundation.

SU-E-T-66: A Prototype for Couch Based Real-Time Dosimetry in External Beam Radiotherapy

International Nuclear Information System (INIS)

Ramachandran, P

2015-01-01

Purpose: The main purpose of this study is to design a prototype for couch-based based real time dosimetry system in external beam radiotherapy Methods: A prototype of 100 ionization chambers was designed on a printed circuit board by etching the copper layer and each ionization chamber was wired to a 50 pin connector. The signals from the two 50 pin connectors collected from the ionization chambers were then transferred to a PXI module from National Instruments. The PXI module houses a current amplifier that amplifies the charge collected from the ionization chamber. The amplified signal is then sent to a digital multimeter module for converting the analog signal to digital signal. A software was designed in labview to read and display the signals obtained from the PXI module. A couch attachment frame was designed to house the 100 ionization chamber module. The frame was fixed underneath the treatment couch for measuring the dose during treatment. Resutls: The ionization chamber based prototype dosimetry was tested for simple radiotherapy treatment fields and found to be a useful device for measuring real time dosimetry at the treatment couch plane. This information could be used to assess the delivered dose to a patient during radiotherapy. It could be used as an invivo dosimeter during radiotherapy. Conclusion: In this study, a prototype for couch based real time dosimetry system was designed and tested. The prototype forms a basis for the development of large scale couch based real time dosimetry system that could be used to perform morning QA prior to treatment, assess real time doses delivered to patient and as a device to monitor the output of the treatment beam. Peter MacCallum Cancer Foundation

USE OF ONTOLOGIES FOR KNOWLEDGE BASES CREATION TUTORING COMPUTER SYSTEMS

OpenAIRE

Cheremisina Lyubov

2014-01-01

This paper deals with the use of ontology for the use and development of intelligent tutoring systems. We consider the shortcomings of educational software and distance learning systems and the advantages of using ontology’s in their design. Actuality creates educational computer systems based on systematic knowledge. We consider classification of properties, use and benefits of ontology’s. Characterized approaches to the problem of ontology mapping, the first of which – manual mapping, the s...

D6.4 Implementation: Project Knowledge Management

DEFF Research Database (Denmark)

Dolog, Peter; Durao, Frederico; Jahn, Karsten

2009-01-01

This report presents the prototype for the project knowledge management in Logica. We describe the related theories and our approach, the ‘circle of knowledge’. According to our analysis it results in the data-based import or update process between two specialized applications, one for project...... management and one for knowledge sharing. We describe the applications involved and the features used. The main component here is a templating mechanism in the KiWi system....

Prototype models for the MOIRA computerised system

Energy Technology Data Exchange (ETDEWEB)

Monte, Luigi [ENEA, Centro Ricerche Casaccia, Rome (Italy). Dipt. Ambiente; Hakanson, Lars [Uppsala, Univ. (Sweden). Institute of Earth Sciences; Brittain, John [Oslo, Univ. (Norway). Zoological Museum

1997-06-01

The main aim of the present report is to describe selected models and the principles of the Decision Analysis theory that will be applied to develop the model-based computerised system `MOIRA`. A dose model and a model for predicting radiocaesium migration in lakes and the effects of countermeasures to reduce the contamination levels in the components of lacustrine system are described in detail. The principles for developing prototype models for predicting the migration of {sup 90}Sr in lake abiotic and biotic components are discussed. The environmental models described in the report are based on the use of `collective parameters` which due to mutual compensation effects of different phenomena occurring in complex systems, show low variability when the environmental conditions change. Use of such `collective parameters` not only increases the predictive power of the models, but also increases the practical applicability of the model. Among the main results described in the report, the development of an objective hierarchy table for evaluating the effectiveness of a countermeasure when the economic, social and ecological impacts are accounted for, deserves special attention.

Expert system in PNC, 4

International Nuclear Information System (INIS)

Yamamoto, Fumio; Nakazawa, Hiroaki

1990-01-01

We have been developing an operation assisting system, partially supported by AI system, for uranium enrichment plant. The AI system is a proto-type system aiming a final one which can be applied to any future large uranium enrichment plant and also not only to specific operational area but also to complex and multi-phenomenon operational area. An existing AI system, for example facility diagnostic system that utilizes the result of CCT(Cause Consequence Tree) analysis as knowledge base, has weakness in flexibility and potentiality. To build AI system, we have developed the most suitable knowledge representations using deep knowledge for each facility or operation of uranium enrichment plant. This paper describes our AI proto-type system adopting several knowledge representations that can represent an uranium enrichment plant's operation with deep knowledge. (author)

New frontiers in information and production systems modelling and analysis incentive mechanisms, competence management, knowledge-based production

CERN Document Server

Novikov, Dmitry; Bakhtadze, Natalia; Zaikin, Oleg

2016-01-01

This book demonstrates how to apply modern approaches to complex system control in practical applications involving knowledge-based systems. The dimensions of knowledge-based systems are extended by incorporating new perspectives from control theory, multimodal systems and simulation methods.  The book is divided into three parts: theory, production system and information system applications. One of its main focuses is on an agent-based approach to complex system analysis. Moreover, specialised forms of knowledge-based systems (like e-learning, social network, and production systems) are introduced with a new formal approach to knowledge system modelling.   The book, which offers a valuable resource for researchers engaged in complex system analysis, is the result of a unique cooperation between scientists from applied computer science (mainly from Poland) and leading system control theory researchers from the Russian Academy of Sciences’ Trapeznikov Institute of Control Sciences.

IGENPRO knowledge-based operator support system

International Nuclear Information System (INIS)

Morman, J. A.

1998-01-01

Research and development is being performed on the knowledge-based IGENPRO operator support package for plant transient diagnostics and management to provide operator assistance during off-normal plant transient conditions. A generic thermal-hydraulic (T-H) first-principles approach is being implemented using automated reasoning, artificial neural networks and fuzzy logic to produce a generic T-H system-independent/plant-independent package. The IGENPRO package has a modular structure composed of three modules: the transient trend analysis module PROTREN, the process diagnostics module PRODIAG and the process management module PROMANA. Cooperative research and development work has focused on the PRODIAG diagnostic module of the IGENPRO package and the operator training matrix of transients used at the Braidwood Pressurized Water Reactor station. Promising simulator testing results with PRODIAG have been obtained for the Braidwood Chemical and Volume Control System (CVCS), and the Component Cooling Water System. Initial CVCS test results have also been obtained for the PROTREN module. The PROMANA effort also involves the CVCS. Future work will be focused on the long-term, slow and mild degradation transients where diagnoses of incipient T-H component failure prior to forced outage events is required. This will enhance the capability of the IGENPRO system as a predictive maintenance tool for plant staff and operator support

Rethink! prototyping transdisciplinary concepts of prototyping

CERN Document Server

Nagy, Emilia; Stark, Rainer

2016-01-01

In this book, the authors describe the findings derived from interaction and cooperation between scientific actors employing diverse practices. They reflect on distinct prototyping concepts and examine the transformation of development culture in their fusion to hybrid approaches and solutions. The products of tomorrow are going to be multifunctional, interactive systems – and already are to some degree today. Collaboration across multiple disciplines is the only way to grasp their complexity in design concepts. This underscores the importance of reconsidering the prototyping process for the development of these systems, particularly in transdisciplinary research teams. “Rethinking Prototyping – new hybrid concepts for prototyping” was a transdisciplinary project that took up this challenge. The aim of this programmatic rethinking was to come up with a general concept of prototyping by combining innovative prototyping concepts, which had been researched and developed in three sub-projects: “Hybrid P...

Virginia Power's computer-based interactive videodisc training: a prototype for the future

International Nuclear Information System (INIS)

Seigler, G.G.; Adams, R.H.

1987-01-01

Virginia Power has developed a system and internally produced a prototype for computer-based interactive videodisc (CBIV) training. Two programs have been developed using the CBIV instructional methodology: Fire Team Retraining and General Employee Training (practical factors). In addition, the company developed a related program for conducting a videodisc tour of their nuclear power stations using a videodisc information management system (VIMS)

Study of fault diagnosis software design for complex system based on fault tree

International Nuclear Information System (INIS)

Yuan Run; Li Yazhou; Wang Jianye; Hu Liqin; Wang Jiaqun; Wu Yican

2012-01-01

Complex systems always have high-level reliability and safety requirements, and same does their diagnosis work. As a great deal of fault tree models have been acquired during the design and operation phases, a fault diagnosis method which combines fault tree analysis with knowledge-based technology has been proposed. The prototype of fault diagnosis software has been realized and applied to mobile LIDAR system. (authors)

Open-Ended Interaction in Cooperative Pro-to-typing: A Video-based Analysis

DEFF Research Database (Denmark)

Bødker, Susanne; Grønbæk, Kaj; Trigg, Randal

1991-01-01

Cooperative Prototyping can be characterized as the use and development of prototypes as catalysts during discussions between designers and potential users – the overall intention being one of mutual learning. On the one hand, the designers learn more about the work practices of the users in ways...... that are tied concretely to some current version of the prototype. On the other hand, the users learn more about the potential for change in their work practice, whether computer-based or otherwise. This paper presents the results of a field study of the cooperative prototyping process. The study is based...... on a fine-grained video-based analysis of a single prototyping session, and focuses on the effects of an open-ended style of interaction between users and designers around a prototype. An analysis of focus shifts, initiative and storytelling during the session is brought to bear on the question of whether...

SIMS prototype system 1: Design data brochure. [solar heating system

Science.gov (United States)

1978-01-01

A prototype solar heating and hot water system using air as the collector fluid and a pebble bed for heat storage was designed for installation into a single family dwelling. The system, subsystem, and installation requirements are described. System operation and performance are discussed, and procedures for sizing the system to a specific site are presented.

D and D knowledge management information tool - a web based system developed to share D and D knowledge worldwide

International Nuclear Information System (INIS)

Lagos, L.; Upadhyay, H.; Shoffner, P.

2013-01-01

Deactivation and decommissioning (D and D) work is a high risk and technically challenging enterprise within the U.S. Department of Energy complex. During the past three decades, the DOE's Office of Environmental Management has been in charge of carrying out one of the largest environmental restoration efforts in the world: the cleanup of the Manhattan Project legacy. In today's corporate world, worker experiences and knowledge that have developed over time represent a valuable corporate asset. The ever-dynamic workplace, coupled with an aging workforce, presents corporations with the ongoing challenge of preserving work-related experiences and knowledge for cross-generational knowledge transfer to the future workforce [5]. To prevent the D and D knowledge base and expertise from being lost over time, the DOE and the Applied Research Center at Florida International University (FIU) have developed the web-based Knowledge Management Information Tool (KM-IT) to capture and maintain this valuable information in a universally available and easily accessible and usable system. The D and D KM-IT was developed in collaboration with DOE Headquarters (HQ), the Energy Facility Contractors Group (EFCOG), and the ALARA [as low as reasonably achievable] Centers at Savannah River Sites to preserve the D and D information generated and collected by the D and D community. This is an open secured system that can be accessed from https://www.dndkm.org over the web and through mobile devices at https://m.dndkm.org. This knowledge system serves as a centralized repository and provides a common interface for D and D-related activities. It also improves efficiency by reducing the need to rediscover knowledge and promotes the reuse of existing knowledge. It is a community-driven system that facilitates the gathering, analyzing, storing, and sharing of knowledge and information within the D and D community. It assists the DOE D and D community in identifying potential solutions

D and D knowledge management information tool - a web based system developed to share D and D knowledge worldwide

Energy Technology Data Exchange (ETDEWEB)

Lagos, L.; Upadhyay, H.; Shoffner, P. [Applied Research Center, Florida International University, 10555 W. Flagler Street,EC2100, Miami, FL (United States)

2013-07-01

Deactivation and decommissioning (D and D) work is a high risk and technically challenging enterprise within the U.S. Department of Energy complex. During the past three decades, the DOE's Office of Environmental Management has been in charge of carrying out one of the largest environmental restoration efforts in the world: the cleanup of the Manhattan Project legacy. In today's corporate world, worker experiences and knowledge that have developed over time represent a valuable corporate asset. The ever-dynamic workplace, coupled with an aging workforce, presents corporations with the ongoing challenge of preserving work-related experiences and knowledge for cross-generational knowledge transfer to the future workforce [5]. To prevent the D and D knowledge base and expertise from being lost over time, the DOE and the Applied Research Center at Florida International University (FIU) have developed the web-based Knowledge Management Information Tool (KM-IT) to capture and maintain this valuable information in a universally available and easily accessible and usable system. The D and D KM-IT was developed in collaboration with DOE Headquarters (HQ), the Energy Facility Contractors Group (EFCOG), and the ALARA [as low as reasonably achievable] Centers at Savannah River Sites to preserve the D and D information generated and collected by the D and D community. This is an open secured system that can be accessed from https://www.dndkm.org over the web and through mobile devices at https://m.dndkm.org. This knowledge system serves as a centralized repository and provides a common interface for D and D-related activities. It also improves efficiency by reducing the need to rediscover knowledge and promotes the reuse of existing knowledge. It is a community-driven system that facilitates the gathering, analyzing, storing, and sharing of knowledge and information within the D and D community. It assists the DOE D and D community in identifying potential solutions

Knowledge-based dialogue in Intelligent Decision Support Systems

International Nuclear Information System (INIS)

Hollnagel, E.

1987-01-01

The overall goal for the design of Intelligent Decision Support Systems (IDSS) is to enhance understanding of the process under all operating conditions. For an IDSS to be effective, it must: select or generate the right information; produce reliable and consistent information; allow flexible and effective operator interaction; relate information presentation to current plant status and problems; and make the presentation at the right time. Several ongoing R and D programs try to design and build IDSSs. A particular example is the ESPRIT project Graphics and Knowledge Based Diaglogue for Dynamic Systems (GRADIENT). This project, the problems it addresses, and its uses, are discussed here

A translational platform for prototyping closed-loop neuromodulation systems

Science.gov (United States)

Afshar, Pedram; Khambhati, Ankit; Stanslaski, Scott; Carlson, David; Jensen, Randy; Linde, Dave; Dani, Siddharth; Lazarewicz, Maciej; Cong, Peng; Giftakis, Jon; Stypulkowski, Paul; Denison, Tim

2013-01-01

While modulating neural activity through stimulation is an effective treatment for neurological diseases such as Parkinson's disease and essential tremor, an opportunity for improving neuromodulation therapy remains in automatically adjusting therapy to continuously optimize patient outcomes. Practical issues associated with achieving this include the paucity of human data related to disease states, poorly validated estimators of patient state, and unknown dynamic mappings of optimal stimulation parameters based on estimated states. To overcome these challenges, we present an investigational platform including: an implanted sensing and stimulation device to collect data and run automated closed-loop algorithms; an external tool to prototype classifier and control-policy algorithms; and real-time telemetry to update the implanted device firmware and monitor its state. The prototyping system was demonstrated in a chronic large animal model studying hippocampal dynamics. We used the platform to find biomarkers of the observed states and transfer functions of different stimulation amplitudes. Data showed that moderate levels of stimulation suppress hippocampal beta activity, while high levels of stimulation produce seizure-like after-discharge activity. The biomarker and transfer function observations were mapped into classifier and control-policy algorithms, which were downloaded to the implanted device to continuously titrate stimulation amplitude for the desired network effect. The platform is designed to be a flexible prototyping tool and could be used to develop improved mechanistic models and automated closed-loop systems for a variety of neurological disorders. PMID:23346048

Prototype performance studies of a Full Mesh ATCA-based General Purpose Data Processing Board

CERN Document Server

Okumura, Yasuyuki; Liu, Tiehui Ted; Yin, Hang

2013-01-01

High luminosity conditions at the LHC pose many unique challenges for potential silicon based track trigger systems. One of the major challenges is data formatting, where hits from thousands of silicon modules must first be shared and organized into overlapping eta-phi trigger towers. Communication between nodes requires high bandwidth, low latency, and flexible real time data sharing, for which a full mesh backplane is a natural solution. A custom Advanced Telecommunications Computing Architecture data processing board is designed with the goal of creating a scalable architecture abundant in flexible, non-blocking, high bandwidth board to board communication channels while keeping the design as simple as possible. We have performed the first prototype board testing and our first attempt at designing the prototype system has proven to be successful. Leveraging the experience we gained through designing, building and testing the prototype board system we are in the final stages of laying out the next generatio...

JACOS: AI-based simulation system for man-machine system behavior in NPP

Energy Technology Data Exchange (ETDEWEB)

Yoshida, Kazuo; Yokobayashi, Masao; Tanabe, Fumiya [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Kawase, Katsumi [CSK Corp., Tokyo (Japan); Komiya, Akitoshi [Computer Associated Laboratory, Inc., Hitachinaka, Ibaraki (Japan)

2001-08-01

A prototype of a computer simulation system named JACOS (JAERI COgnitive Simulation system) has been developed at JAERI (Japan Atomic Energy Research Institute) to simulate the man-machine system behavior in which both the cognitive behavior of a human operator and the plant behavior affect each other. The objectives of this system development is to provide man-machine system analysts with detailed information on the cognitive process of an operator and the plant behavior affected by operator's actions in accidental situations of a nuclear power plant. The simulation system consists of an operator model and a plant model which are coupled dynamically. The operator model simulates an operator's cognitive behavior in accidental situations based on the decision ladder model of Rasmussen, and is implemented using the AI-techniques of the distributed cooperative inference method with the so-called blackboard architecture. Rule-based behavior is simulated using knowledge representation with If-Then type of rules. Knowledge-based behavior is simulated using knowledge representation with MFM (Multilevel Flow Modeling) and qualitative reasoning method. Cognitive characteristics of attentional narrowing, limitation of short-term memory, and knowledge recalling from long-term memory are also taken into account. The plant model of a 3-loop PWR is also developed using a best estimate thermal-hydraulic analysis code RELAP5/MOD2. This report is prepared as User's Manual for JACOS. The first chapter of this report describes both operator and plant models in detail. The second chapter includes instructive descriptions for program installation, building of a knowledge base for operator model, execution of simulation and analysis of simulation results. The examples of simulation with JACOS are shown in the third chapter. (author)

Knowledge Base Editor (SharpKBE)

Science.gov (United States)

Tikidjian, Raffi; James, Mark; Mackey, Ryan

2007-01-01

The SharpKBE software provides a graphical user interface environment for domain experts to build and manage knowledge base systems. Knowledge bases can be exported/translated to various target languages automatically, including customizable target languages.

Knowledge Resources - A Knowledge Management Approach for Digital Ecosystems

Science.gov (United States)

Kurz, Thomas; Eder, Raimund; Heistracher, Thomas

The paper at hand presents an innovative approach for the conception and implementation of knowledge management in Digital Ecosystems. Based on a reflection of Digital Ecosystem research of the past years, an architecture is outlined which utilizes Knowledge Resources as the central and simplest entities of knowledge transfer. After the discussion of the related conception, the result of a first prototypical implementation is described that helps the transformation of implicit knowledge to explicit knowledge for wide use.