WorldWideScience

Sample records for prototype instructional materials

  1. Rapid Prototyping: An Alternative Instructional Design Strategy.

    Science.gov (United States)

    Tripp, Steven D.; Bichelmeyer, Barbara

    1990-01-01

    Discusses the nature of instructional design and describes rapid prototyping as a feasible model for instructional system design (ISD). The use of prototyping in software engineering is described, similarities between software design and instructional design are discussed, and an example is given which uses rapid prototyping in designing a…

  2. Rapid Prototyping in Instructional Design: Creating Competencies

    Science.gov (United States)

    Fulton, Carolyn D.

    2010-01-01

    Instructional designers working in rapid prototyping environments currently do not have a list of competencies that help to identify the knowledge, skills, and attitudes (KSAs) required in these workplaces. This qualitative case study used multiple cases in an attempt to identify rapid prototyping competencies required in a rapid prototyping…

  3. Optimizing Classroom Instruction through Self-Paced Learning Prototype

    Science.gov (United States)

    Bautista, Romiro G.

    2015-01-01

    This study investigated the learning impact of self-paced learning prototype in optimizing classroom instruction towards students' learning in Chemistry. Two sections of 64 Laboratory High School students in Chemistry were used as subjects of the study. The Quasi-Experimental and Correlation Research Design was used in the study: a pre-test was…

  4. Prototype road weather performance management tool : installation instructions & user manual.

    Science.gov (United States)

    2016-07-20

    This document is the Installation Instructions and User Manual for the Road Weather Performance Management (RW-PM) Tool developed for the project on Development and Demonstration of a Prototype Road Weather Performance Management Application that Use...

  5. Prototype road weather performance management (RWPM) tool installation instructions & user manual.

    Science.gov (United States)

    2016-07-20

    This document is the Installation Instructions and User Manual for the Road Weather Performance Management (RW-PM) Tool developed for the project on Development and Demonstration of a Prototype Road Weather Performance Management Application that Use...

  6. Optimizing classroom instruction through self-paced learning prototype

    Directory of Open Access Journals (Sweden)

    Romiro Gordo Bautista

    2015-09-01

    Full Text Available This study investigated the learning impact of self-paced learning prototype in optimizing classroom instruction towards students’ learning in Chemistry. Two sections of 64 Laboratory High School students in Chemistry were used as subjects of the study. The Quasi-Experimental and Correlation Research Design was used in the study: a pre-test was conducted, scored and analyzed which served as the basis in determining the initial learning schema of the respondents. A questionnaire was adopted to find the learning motivation of the students in science. Using Pearson-r correlation, it was found out that there is a highly significant relationship between their internal drive and their academic performance. Moreover, a post-test was conducted after self-paced learning prototype was used in the development of select topics in their curricular plot. It was found out that the students who experienced the self-paced learning prototype performed better in their academic performance as evidenced by the difference of their mean post-test results. ANCOVA results on the post-test mean scores of the respondents were utilized in establishing the causal-effect of the learning prototype to the academic performance of the students in Chemistry. A highly significant effect on their academic performance (R-square value of 70.7% and significant interaction of the models to the experimental grouping and mental abilities of the respondents are concluded in the study.

  7. Playing, Debugging, Learning: A Proposal between Game and Instructional Designs via Extended Prototyping

    Science.gov (United States)

    Gandolfi, Enrico

    2018-01-01

    This article investigates the phenomenon of open and participative development (e.g. beta testing, Kickstarter projects)--i.e. extended prototyping--in digital entertainment as a potential source of insights for instructional interventions. Despite the increasing popularity of this practice and the potential implications for educators and…

  8. Designing Instructional Materials: Some Guidelines.

    Science.gov (United States)

    Burbank, Lucille; Pett, Dennis

    Guidelines for the design of instructional materials are outlined in this paper. The principles of design are presented in five major categories: (1) general design (structural appeal and personal appeal); (2) instructional design (attention, memory, concept learning, and attitude change); (3) visual design (media considerations, pictures, graphs…

  9. Rapid Prototyping: Technologies, Materials and Advances

    Directory of Open Access Journals (Sweden)

    Dudek P.

    2016-06-01

    Full Text Available In the context of product development, the term rapid prototyping (RP is widely used to describe technologies which create physical prototypes directly from digital data. Recently, this technology has become one of the fastest-growing methods of manufacturing parts. The paper provides brief notes on the creation of composites using RP methods, such as stereolithography, selective laser sintering or melting, laminated object modelling, fused deposition modelling or three-dimensional printing. The emphasis of this work is on the methodology of composite fabrication and the variety of materials used in these technologies.

  10. INSTRUCTIONAL MATERIALS CATALOG.

    Science.gov (United States)

    Ohio Vocational Agriculture Instructional Materials Service, Columbus.

    THE TITLE, IDENTIFICATION NUMBER, DATE OF PUBLICATION, PAGINATION, A BRIEF DESCRIPTION, AND PRICE ARE GIVEN FOR EACH OF THE INSTRUCTIONAL MATERIALS AND AUDIOVISUAL AIDS INCLUDED IN THIS CATALOG. TOPICS COVERED ARE FIELD CORPS, HORTICULTURE, ANIMAL SCIENCE, SOILS, AGRICULTURAL ENGINEERING, AND FARMING PROGRAMS. AN ORDER FORM IS INCLUDED. (JM)

  11. Written instructions for the transport of hazardous materials: Accident management instruction sheets

    International Nuclear Information System (INIS)

    Ridder, K.

    1988-01-01

    In spite of the regulations and the safety provisions taken, accidents are not entirely avoidable in the transport of hazardous materials. For managing an accident and preventing further hazards after release of dangerous substances, the vehicle drivers must carry with them the accident management instruction sheets, which give instructions on immediate counter measures to be taken by the driver, and on information to be given to the police and the fire brigades. The article in hand discusses the purpose, the contents, and practice-based improvement of this collection of instruction sheets. Particular reference is given to the newly revised version of June 15, 1988 (Verkehrsblatt 1/88) of the 'Directives for setting up accident management instruction sheets - written instructions - for road transport of hazardous materials', as issued by the Federal Ministry of Transport. (orig./HP) [de

  12. Measurement Control Workshop Instructional Materials

    International Nuclear Information System (INIS)

    Gibbs, Philip; Crawford, Cary; McGinnis, Brent

    2014-01-01

    A workshop to teach the essential elements of an effective nuclear materials control and accountability (MC&A) programs are outlined, along with the modes of Instruction, and the roles and responsibilities of participants in the workshop.

  13. Measurement control workshop instructional materials

    Energy Technology Data Exchange (ETDEWEB)

    Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Crawford, Cary [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McGinnis, Brent [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Insolves LLC, Piketon, OH (United States)

    2014-04-01

    A workshop to teach the essential elements of an effective nuclear materials control and accountability (MC&A) programs are outlined, along with the modes of Instruction, and the roles and responsibilities of participants in the workshop.

  14. Development and validation of science, technology, engineering and mathematics (STEM) based instructional material

    Science.gov (United States)

    Gustiani, Ineu; Widodo, Ari; Suwarma, Irma Rahma

    2017-05-01

    This study is intended to examine the development and validation of simple machines instructional material that developed based on Science, Technology, Engineering and Mathematics (STEM) framework that provides guidance to help students learn and practice for real life and enable individuals to use knowledge and skills they need to be an informed citizen. Sample of this study consist of one class of 8th grader at a junior secondary school in Bandung, Indonesia. To measure student learning, a pre-test and post-test were given before and after implementation of the STEM based instructional material. In addition, a questionnaire of readability was given to examine the clarity and difficulty level of each page of instructional material. A questionnaire of students' response towards instructional material given to students and teachers at the end of instructional material reading session to measure layout aspects, content aspects and utility aspects of instructional material for being used in the junior secondary school classroom setting. The results show that readability aspect and students' response towards STEM based instructional material of STEM based instructional material is categorized as very high. Pretest and posttest responses revealed that students retained significant amounts information upon completion of the STEM instructional material. Student overall learning gain is 0.67 which is categorized as moderate. In summary, STEM based instructional material that was developed is valid enough to be used as educational materials necessary for conducting effective STEM education.

  15. Magnetic refrigeration at room temperature - from magnetocaloric materials to a prototype

    DEFF Research Database (Denmark)

    Kuhn, Luise Theil; Pryds, Nini; Bahl, Christian Robert Haffenden

    2011-01-01

    Based on the magnetocaloric effect, magnetic refrigeration at room temperature has for the past decade been a promising, environmentally friendly new energy technology predicted to have a significantly higher efficiency than the present conventional methods. However, so far only a few prototype...... refrigeration machines have been presented worldwide and there are still many scientific and technological challenges to be overcome. We report here on the MagCool project, which spans all the way from basic materials studies to the construction of a prototype. Emphasis has been on ceramic magnetocaloric...... materials, their shaping and graded composition for technological use. Modelling the performance of a permanent magnet with optimum use of the flux and relatively low weight, and designing and constructing a prototype continuous magnetic refrigeration device have also been major tasks in the project...

  16. Magnetic refrigeration at room temperature - from magnetocaloric materials to a prototype

    International Nuclear Information System (INIS)

    Kuhn, L Theil; Pryds, N; Bahl, C R H; Smith, A

    2011-01-01

    Based on the magnetocaloric effect, magnetic refrigeration at room temperature has for the past decade been a promising, environmentally friendly new energy technology predicted to have a significantly higher efficiency than the present conventional methods. However, so far only a few prototype refrigeration machines have been presented worldwide and there are still many scientific and technological challenges to be overcome. We report here on the MagCool project, which spans all the way from basic materials studies to the construction of a prototype. Emphasis has been on ceramic magnetocaloric materials, their shaping and graded composition for technological use. Modelling the performance of a permanent magnet with optimum use of the flux and relatively low weight, and designing and constructing a prototype continuous magnetic refrigeration device have also been major tasks in the project.

  17. Guidelines for the Development of Instructional Materials Selection Policies. Handbook I.

    Science.gov (United States)

    Motomatsu, Nancy, Ed.

    This manual was developed to assist school district personnel in the development of policies and procedures for selecting instructional materials. The manual describes State of Washington laws and regulations that govern the selection, use, and disposal of instructional materials and presents criteria and guidelines for selecting materials. Also…

  18. USING PREZI PRESENTATION AS INSTRUCTIONAL MATERIAL IN ENGLISH GRAMMAR CLASSROOM

    Directory of Open Access Journals (Sweden)

    Rahmat Yusny

    2016-05-01

    Full Text Available Utilizing digital technology as a medium for educational instruction has now become one of the 21 century pedagogy trends. Numerous researches suggested that using digital technology provides positive impacts as it gives more access to resources for the learning. In Foreign language pedagogy, using digital technology fosters learners’ autonomy by self-managing the amount of learning inputs outside the classroom. However, many studies emphasize more on the communicative and the vast resources accessible for the learners. Very limited attention given to the impact of the visual aid that focuses on aesthetic values of instructional design. English Grammar is one of many subjects that often received complaints by learners and claimed as a “boring” subject. Many English teachers especially in developing countries still utilize traditional method in teaching grammar. They introduce sentence structure using grammar formulas. Although, this method is still very popular, it often considered monotonous by many learners. This paper discusses about the study of using Prezi.com presentation to deliver grammar instruction materials in an English language classroom. From the study, it was found that the majority of the students involved in the study are fond of the materials and the post-test results showed grammar mastery improvement after receiving a grammar lesson that shows instructional materials using prezi. On the other hand, the control class that uses only writing boards and worksheets showed less improvement. This research provides new technique in developing grammar instruction design using a web tool called Prezi in enhancing the display of the instruction material. The experiment was given to students of English Language Education. The result of the study shows students’ positive perception toward the use of Prezi in English grammar instructional material.

  19. Linking didactics and research in instructional material: A new structural model

    DEFF Research Database (Denmark)

    Graf, Stefan Ting

    2009-01-01

    How can research in instructional materials become more relevant for didactics and instruction planning? And how can general didactics reflect questions developed from a media perspective. These are the guiding questions of the article, which assumes a gap between general didactics and research...... and theory of instructional material. General didactics does not sufficiently incorporate a theory of media, and research and theory in instructional material do not recognise general didactics and apply very different conceptions of instruction in their studies – if at all. Through two approaches we argue...... for a new basic structure in didactics in order to bridge the gap when relevant conclusions for pragmatic didactics are in question. The first approach accounts for the place and status of media in the most known structural theories in general didactics. The second approach argues from another angle...

  20. Instructional Materials Commonly Employed by Foreign Language Teachers at Elementary Schools

    Directory of Open Access Journals (Sweden)

    İsmail Çakır

    2015-09-01

    Full Text Available This study aimed to determine the teachers’ choices of instructional materials in teaching English at elementary schools. The reasons behind preferring or not preferring some certain instructional materials specified within the research were analysed. To this end, during the course of School Experience, 68 prospective English teachers observed 38 teachers of English working at 14 elementary schools on a weekly basis, and they completed a questionnaire. A semi-structured interview was also conducted with five randomly selected teachers to identify their reasons for choosing certain instructional materials. The descriptive results revealed that most of the teachers were reluctant to use many of the highly beneficial materials due to reasons including overcrowded classes, limited technological knowledge, lack of time for preparation, curricular time constraints, heavy work load, burnout etc. The study suggests that apart from course-books teachers should be encouraged to use other instructional materials to motivate learners and offer an interactive foreign language teaching atmosphere.

  1. Instructional materials commonly employed by foreign language teachers at elementary schools

    Directory of Open Access Journals (Sweden)

    İsmail Çakır

    2015-09-01

    Full Text Available This study aimed to determine the teachers’ choices of instructional materials in teaching English at elementary schools. The reasons behind preferring or not preferring some certain instructional materials specified within the research were analysed. To this end, during the course of School Experience, 68 prospective English teachers observed 38 teachers of English working at 14 elementary schools on a weekly basis, and they completed a questionnaire. A semi-structured interview was also conducted with five randomly selected teachers to identify their reasons for choosing certain instructional materials. The descriptive results revealed that most of the teachers were reluctant to use many of the highly beneficial materials due to reasons including overcrowded classes, limited technological knowledge, lack of time for preparation, curricular time constraints, heavy work load, burnout etc. The study suggests that apart from course-books teachers should be encouraged to use other instructional materials to motivate learners and offer an interactive foreign language teaching atmosphere.

  2. 76 FR 34068 - Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students...

    Science.gov (United States)

    2011-06-10

    ... DEPARTMENT OF EDUCATION Advisory Commission on Accessible Instructional Materials in Postsecondary... Commission on Accessible Instructional Materials in Postsecondary Education for Students with Disabilities... or by mail to Advisory Commission on Accessible Instructional Materials in Postsecondary Education...

  3. Instructional Aids, Materials, and Supplies--Guidelines.

    Science.gov (United States)

    Education Development Center, Inc., Newton, MA.

    This resource guide produced for the Follow Through Program, primarily lists instructional aids and supplies; it also suggests practical implications for provisioning the classroom environment, gives specific suggestions for Project Follow Through directors, and lists addresses of suppliers. The materials are divided into nine categories, which…

  4. Perceptions of Crop Science Instructional Materials.

    Science.gov (United States)

    Elkins, D. M.

    1994-01-01

    A number of crop science instructors have indicated that there is a shortage of quality, current crop/plant science teaching materials, particularly textbooks. A survey instrument was developed to solicit information from teachers about the use and adequacy of textbooks, laboratory manuals, and videotapes in crop/plant science instruction. (LZ)

  5. 76 FR 14385 - Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students...

    Science.gov (United States)

    2011-03-16

    ... DEPARTMENT OF EDUCATION Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students With Disabilities Meeting AGENCY: Advisory Commission on Accessible Instructional... Commission on Accessible Instructional Materials in Postsecondary Education for Students With Disabilities...

  6. Writing Performance Goals: Strategy and Prototypes. A Manual for Vocational and Technical Educators.

    Science.gov (United States)

    McGraw-Hill Book Co., New York, NY. Gregg Div.

    The result of a cooperative project of the Center for Vocational and Technical Education at the Ohio State University and the McGraw-Hill Book Company, this manual was prepared to develop prototypes of performance goals for use by curriculum specialists and developers of instructional materials in vocational and technical education and to provide…

  7. teachers' perception of the utilization of instructional materials

    African Journals Online (AJOL)

    Global Journal

    social studies in junior secondary schools in Calabar Municipality of Cross River State, Nigeria. The ... teachers perceive instructional materials as necessary for effective teaching and learning. ..... Technologies, Methods & Media Port-.

  8. Materials Selection and Their Characteristics as Used in Rapid Prototyping

    Science.gov (United States)

    Cooper, K.; Salvail, P.; Vesely, E.; Wells, D.

    1999-01-01

    NASA's Marshall Space Flight Center (MSFC) conducted a program to evaluate six technologies used in Rapid Prototyping (RP) to produce investment casting patterns. In this paper, RP refers to the collective additive fabrication technologies known as Solid Free-Form Fabrication. Such technologies are being used with increasing frequency in manufacturing applications, due in part to their rapidly expanding capabilities to fabricate models from many types of materials. This study used ABS plastic, polycarbonate, TrueForm PM6, epoxy resin, paper, starch, and wax. The baseline model was a semi-complex prototype fuel pump housing, intended for use in the X-33 reusable launch vehicle. All models were shelled in a production- grade colloidal silica ceramic. Primary coats were zircon-base flour with zircon backup, while secondary coats were silica grains with a tabular alumina backup. Each model was shelled in an identical manner, using the same atmospheric conditions and drying times, as well as the same number of layers. Bake-outs and firing cycles were consistent with the leach ability of each material. Preheat and bath temperatures were also kept consistent. All molds were cast in vacuum using a hydrogen-resistant superalloy (NASA- 23) that was developed in-house. The final technical evaluation included detailed measurements of the model and the final casting, in order to determine any dimensional changes caused by different pattern materials, as well as documentation of all defects and any obvious refractory/model reactions. Prototype production costs were estimated for each method and taken into consideration during trade-off analysis.

  9. Prototype tokamak fusion reactor based on SiC/SiC composite material focusing on easy maintenance

    International Nuclear Information System (INIS)

    Nishio, S.; Ueda, S.; Kurihara, R.; Kuroda, T.; Miura, H.; Sako, K.; Takase, H.; Seki, Y.; Adachi, J.; Yamazaki, S.; Hashimoto, T.; Mori, S.; Shinya, K.; Murakami, Y.; Senda, I.; Okano, K.; Asaoka, Y.; Yoshida, T.

    2000-01-01

    If the major part of the electric power demand is to be supplied by tokamak fusion power plants, the tokamak reactor must have an ultimate goal, i.e. must be excellent in construction cost, safety aspect and operational availability (maintainability and reliability), simultaneously. On way to the ultimate goal, the approach focusing on the safety and the availability (including reliability and maintainability) issues must be the more promising strategy. The tokamak reactor concept with the very high aspect ratio configuration and the structural material of SiC/SiC composite is compatible with this approach, which is called the DRastically Easy Maintenance (DREAM) approach. This is because SiC/SiC composite is a low activation material and an insulation material, and the high aspect ratio configuration leads to a good accessibility for the maintenance machines. As the intermediate steps along this strategy between the experimental reactor such as international thermonuclear experimental reactor (ITER) and the ultimate goal, a prototype reactor and an initial phase commercial reactor have been investigated. Especially for the prototype reactor, the material and technological immaturities are considered. The major features of the prototype and commercial type reactors are as follows. The fusion powers of the prototype and the commercial type are 1.5 and 5.5 GW, respectively. The major/minor radii for the prototype and the commercial type are of 12/1.5 m and 16/2 m, respectively. The plasma currents for the prototype and the commercial type are 6 and 9.2 MA, respectively. The coolant is helium gas, and the inlet/outlet temperatures of 500/800 and 600/900 deg. C for the prototype and the commercial type, respectively. The thermal efficiencies of 42 and 50% are obtainable in the prototype and the commercial type, respectively. The maximum toroidal field strengths of 18 and 20 tesla are assumed in the prototype and the commercial type, respectively. The thermal

  10. Material properties influence on steam explosion efficiency. Prototypic versus simulant melts, eutectic versus non-eutectic melts

    International Nuclear Information System (INIS)

    Leskovar, M.; Mavko, B.

    2006-01-01

    A steam explosion may occur during a severe nuclear reactor accident if the molten core comes into contact with the coolant water. A strong enough steam explosion in a nuclear power plant could jeopardize the containment integrity and so lead to a direct release of radioactive material to the environment. Details of processes taking place prior and during the steam explosion have been experimentally studied for a number of years with adjunct efforts in modelling these processes to address the scaling of these experiments. Steam explosion experiments have shown that there are important differences of behaviour between simulant and prototypical melts, and that also at prototypical melts the fuel coolant interactions depend on the composition of the corium. In experiments with prototypic materials no spontaneous steam explosions occurred (except with an eutectic composition), whereas with simulant materials the steam explosions were triggered spontaneously. The energy conversion ratio of steam explosions with prototypic melts is at least one order of magnitude lower than the energy conversion ratio of steam explosions with simulant melts. Although the different behaviour of prototypic and simulant melts has been known for a number of years, there is no reliable explanation for these differences. Consequently it is not possible to reliably estimate whether corium would behave so non-explosive also in reactor conditions, where the mass of poured melt is nearly three orders of magnitude larger than in experimental conditions. An even more fascinating material effect was observed recently at corium experiments with eutectic and non-eutectic compositions. It turned out that eutectic corium always exploded spontaneously, whereas non-eutectic corium never exploded spontaneously. In the paper, a possible explanation of both material effects (prototypic/simulant melts, eutectic/non-eutectic corium) on the steam explosion is provided. A model for the calculation of the

  11. Using SERC for creating and publishing student generated hydrology instruction materials

    Science.gov (United States)

    Merwade, V.; Rajib, A.; Ruddell, B.; Fox, S.

    2016-12-01

    Hydrology instruction typically involves teaching of the hydrologic cycle and the processes associated with it such as precipitation, evapotranspiration, infiltration, runoff generation and hydrograph analysis. With the availability of observed and remotely sensed data in public domain, there is an opportunity to incorporate place-based learning in hydrology classrooms. However, it is not always easy and possible for an instructor to complement an existing hydrology course with new material that requires both time and technical expertise, which the instructor may not have. The work presented here describes an effort where students created the data and modeling driven instruction materials as part of their class assignment for a hydrology course at Purdue University. Students in the class were divided into groups, and each group was assigned a topic such as precipitation, evapotranspiration, streamflow, flow duration curve and flood frequency analysis. Each of the student groups was then instructed to produce an instruction material showing ways to extract/process relevant data and perform some analysis for an area with specific land use characteristic. The student contributions were then organized into learning units such that someone can do a flow duration curve analysis or flood frequency analysis and see how it changes for rural area versus urban area. Science Education Resource Center (SERC) is used as a platform to publish and share these instruction materials so it can be used as-is or through modification by any instructor or student in relevant coursework anywhere in the world.

  12. Application of the instructional congruence framework: Developing supplemental materials for English language learners

    Science.gov (United States)

    Drews, Tina Skjerping

    2009-12-01

    This dissertation is a study of the instructional congruence framework as it was used to develop and pilot a supplemental science unit on energy and the environment for sixth grade students in Arizona. With the growing linguistic and cultural diversity of children in American schools, congruent materials are more important now than ever before. The supplemental materials were designed by the researcher and underwent a six person, three educator and three engineer, panel review. The revised materials were then piloted in two sixth grade classrooms in the Southwest with high numbers of English language learners. Classroom observation, teacher interviews, and the classroom observation protocol were utilized to understand the fidelity to the instructional congruence framework. The fidelity of implementation of materials was subject to the realities of varied educational contexts. Piloting materials in urban contexts with diverse students involved additional challenges. The results of the study explore the challenges in creating instructionally congruent materials for diverse students in urban contexts. Recommendations are provided for curriculum developers that undertake the task of creating instructionally congruent materials and emphasize the need to devise innovative methods of creation, while understanding that there is no perfect solution. The education community as a whole could benefit from incorporating and synthesizing the instructional congruence framework in order to provide maximum opportunities in science for all students.

  13. Instructions for safe transport of radioactive materials

    International Nuclear Information System (INIS)

    2005-01-01

    This entrance includes 5 chapters and tables and supplement. Chapter I contains the definitions and general provisions contained 5 materials. Chapter II contains radioactive materials packaging and permissible limits and it contains 8 materials. The provisions of Chapter III contains descriptions Missionaries. Chapter IV describes shipping instructions. As for the separation of V It contains Final provisions. The entrance contains number of tables speaks of the basic values of radioactive isotopes and radiation also limits activity and the requirements of industrial parcels and limits transactions to transport freight containers, as well as the International Classification of hazardous materials. This also includes entrance to the Supplement to some forms and Alohat

  14. Special nuclear material information, security classification guidance. Instruction

    International Nuclear Information System (INIS)

    Flickinger, A.

    1982-01-01

    The Instruction reissues DoD Instruction 5210.67, July 5, 1979, and provides security classification guidance for information concerning significant quantities of special nuclear material, other than that contained in nuclear weapons and that used in the production of energy in the reactor plant of nuclear-powered ships. Security classification guidance for these data in the latter two applications is contained in Joint DoE/DoD Nuclear Weapons Classification Guide and Joint DoE/DoD Classification Guide for the Naval Nuclear Propulsion Program

  15. Integrating UNESCO ICT-Based Instructional Materials in Chemistry Lessons

    Directory of Open Access Journals (Sweden)

    CHARLIE P. NACARIO

    2014-08-01

    Full Text Available This study determined the effectiveness of the lessons in Chemistry integrating UNESCO ICT-based instructional material on the achievement of Chemistry students at Central Bicol State University of Agriculture. It aimed to identify lessons that may be developed integrating UNESCO ICT-based instructional materials, determine the effect of the developed lessons using the material on: conceptual understanding; science process skills; and attitude towards chemistry and gather insights from the experiences of the students and teacher. The study used the single group pretest and posttest experimental design. Descriptive, quantitative and qualitative techniques were also utilized. Quantitative data were taken from the pretest-posttest results on the Test on Conceptual Understanding, Science Process Skills and Chemistry Attitudinaire. Qualitative data were drawn from the experts’ assessment of the developed lessons and research instruments, and the insights of students and teacher. The developed lessons integrating UNESCO ICT-based instructional materials were Atomic Model and Structure, Periodic Table of Elements, Chemical Bonding, and Balancing Chemical Equation. These lessons increased the conceptual understanding of the students by topic and skill from very low mastery to average mastery level. The students have slightly improved along the different science process skills. After teaching the lessons, the students’ attitude also improved. The students became more motivated and interested in Chemistry and the lessons were student centered and entailed teacher’s competence and flexibility in computer use.

  16. Effects of Hydrocarbon-Based Grease on Rapid Prototype Material Used for Grease Retention Shrouds

    Science.gov (United States)

    Zakrajsek, Andrew J.; Valco, Daniel J.; Street, Kenneth W., Jr.

    2010-01-01

    Effects of hydrocarbon-based greases on specific rapid prototype (RP) materials used to fabricate grease retention shrouds (GRS) were explored in this study. Grease retention shrouds are being considered as a way to maintain adequate grease lubrication at the gear mesh in a prototype research transmission system. Due to their design and manufacturing flexibility, rapid prototype materials were chosen for the grease retention shrouds. In order to gain a better understanding of the short and long term effects grease pose on RP materials, research was conducted on the interaction of hydrocarbon-based grease with RP materials. The materials used in this study were durable polyamide (nylon), acrylonitrile butadiene styrene (ABS), and WaterClear 10120. Testing was conducted using Mobilgrease 28 and Syn-Tech 3913G grease (gear coupling grease). These greases were selected due to their regular use with mechanical components. To investigate the effect that grease has on RP materials, the following methods were used to obtain qualitative and quantitative data: Fourier transform infrared spectroscopy (FT-IR), interference profilometer measurements, digital camera imaging, physical shape measurement, and visual observations. To record the changes in the RP materials due to contact with the grease, data was taken before and after the grease application. Results showed that the WaterClear 10120 RP material provided the best resistance to grease penetration as compared to nylon and ABS RP materials. The manufacturing process, and thus resulting surface conditions of the RP material, played a key role in the grease penetration properties and resilience of these materials.

  17. 76 FR 45236 - Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students...

    Science.gov (United States)

    2011-07-28

    ... DEPARTMENT OF EDUCATION Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students with Disabilities AGENCY: Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students with Disabilities, Office of Special Education and...

  18. 76 FR 7181 - Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students...

    Science.gov (United States)

    2011-02-09

    ... DEPARTMENT OF EDUCATION Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students With Disabilities AGENCY: Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students with Disabilities, Office of Special Education and...

  19. Validation of the Instructional Materials Motivation Survey (IMMS) in a self-directed instructional setting aimed at working with technology

    NARCIS (Netherlands)

    Loorbach, N.R.; Peters, O.; Karreman, Joyce; Steehouder, M.F.

    2015-01-01

    The ARCS Model of Motivational Design has been used myriad times to design motivational instructions that focus on attention, relevance, confidence and satisfaction in order to motivate students. The Instructional Materials Motivation Survey (IMMS) is a 36-item situational measure of people's

  20. 76 FR 52643 - Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students...

    Science.gov (United States)

    2011-08-23

    ... DEPARTMENT OF EDUCATION Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students With Disabilities AGENCY: U. S. Department of Education, Office of Special Education and Rehabilitative Services, Advisory Commission on Accessible Instructional Materials in...

  1. 76 FR 63289 - Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students...

    Science.gov (United States)

    2011-10-12

    ... DEPARTMENT OF EDUCATION Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students With Disabilities AGENCY: U.S. Department of Education, Office of Special Education and Rehabilitative Services, Advisory Commission on Accessible Instructional Materials in...

  2. 75 FR 55789 - Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students...

    Science.gov (United States)

    2010-09-14

    ... DEPARTMENT OF EDUCATION Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students With Disabilities AGENCY: U.S. Department of Education, Office of Special Education and Rehabilitative Services, Advisory Commission on Accessible Instructional Materials in...

  3. 75 FR 80481 - Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students...

    Science.gov (United States)

    2010-12-22

    ... DEPARTMENT OF EDUCATION Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students with Disabilities AGENCY: U. S. Department of Education, Office of Special Education and Rehabilitative Services, Advisory Commission on Accessible Instructional Materials in...

  4. 76 FR 61349 - Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students...

    Science.gov (United States)

    2011-10-04

    ... DEPARTMENT OF EDUCATION Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students With Disabilities AGENCY: U.S. Department of Education, Office of Special Education and Rehabilitative Services, Advisory Commission on Accessible Instructional Materials in...

  5. Development of a new prototype system for measuring the permittivity of dielectric materials

    Directory of Open Access Journals (Sweden)

    Jiajia Jiang

    2014-06-01

    Full Text Available A simple prototype for measuring the properties of dielectric materials is introduced in this Letter. A homogeneous dielectric sample placed in a field produced by a nearby antenna will affect the input impedance of the antenna. The permittivity and the loss of the dielectric sample can then be determined from the change of the input impedance of the antenna. The prototype has been validated by experiments.

  6. 76 FR 19984 - Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students...

    Science.gov (United States)

    2011-04-11

    ... DEPARTMENT OF EDUCATION Advisory Commission on Accessible Instructional Materials in Postsecondary Education for Students With Disabilities AGENCY: U.S. Department of Education, Office of Special Education....gov or by mail to Advisory Commission on Accessible Instructional Materials in Postsecondary Education...

  7. The influence of instructional materials on mathematics achievement ...

    African Journals Online (AJOL)

    The influence of instructional materials on mathematics achievement of senior secondary students in Akamkpa Local Government Area of Cross River State, ... the ten public secondary schools in Akamkpa Local Government Area by stratified random technique, and two (2) Mathematics teachers per school for the study.

  8. The Comparative Instructional Effectiveness of Print-Based and Video-Based Instructional Materials for Teaching Practical Skills at a Distance

    Science.gov (United States)

    Donkor, Francis

    2010-01-01

    Print-based instructional materials have been more popular than any other medium for teaching practical skills during the delivery of technical and vocational education and training via distance learning. However, the approach has its shortcomings and in recent times alternatives have been sought. The comparative instructional effectiveness of one…

  9. Advanced Insider Threat Mitigation Workshop Instructional Materials

    Energy Technology Data Exchange (ETDEWEB)

    Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Larsen, Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); O' Brien, Mike [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Edmunds, Tom [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2009-02-01

    Insiders represent a formidable threat to nuclear facilities. This set of workshop materials covers methodologies to analyze and approaches to mitigate the threat of an insider attempting abrupt and protracted theft of nuclear materials. This particular set of materials is an update of a January 2008 version to add increased emphasis on Material Control and Accounting and its role with respect to protracted insider nuclear material theft scenarios. This report is a compilation of workshop materials consisting of lectures on technical and administrative measures used in Physical Protection (PP) and Material Control and Accounting (MC&A) and methods for analyzing their effectiveness against a postulated insider threat. The postulated threat includes both abrupt and protracted theft scenarios. Presentation is envisioned to be through classroom instruction and discussion. Several practical and group exercises are included for demonstration and application of the analysis approach contained in the lecture/discussion sessions as applied to a hypothetical nuclear facility.

  10. NALDA (Naval Aviation Logistics Data Analysis) CAI (computer aided instruction)

    Energy Technology Data Exchange (ETDEWEB)

    Handler, B.H. (Oak Ridge K-25 Site, TN (USA)); France, P.A.; Frey, S.C.; Gaubas, N.F.; Hyland, K.J.; Lindsey, A.M.; Manley, D.O. (Oak Ridge Associated Universities, Inc., TN (USA)); Hunnum, W.H. (North Carolina Univ., Chapel Hill, NC (USA)); Smith, D.L. (Memphis State Univ., TN (USA))

    1990-07-01

    Data Systems Engineering Organization (DSEO) personnel developed a prototype computer aided instruction CAI system for the Naval Aviation Logistics Data Analysis (NALDA) system. The objective of this project was to provide a CAI prototype that could be used as an enhancement to existing NALDA training. The CAI prototype project was performed in phases. The task undertaken in Phase I was to analyze the problem and the alternative solutions and to develop a set of recommendations on how best to proceed. The findings from Phase I are documented in Recommended CAI Approach for the NALDA System (Duncan et al., 1987). In Phase II, a structured design and specifications were developed, and a prototype CAI system was created. A report, NALDA CAI Prototype: Phase II Final Report, was written to record the findings and results of Phase II. NALDA CAI: Recommendations for an Advanced Instructional Model, is comprised of related papers encompassing research on computer aided instruction CAI, newly developing training technologies, instructional systems development, and an Advanced Instructional Model. These topics were selected because of their relevancy to the CAI needs of NALDA. These papers provide general background information on various aspects of CAI and give a broad overview of new technologies and their impact on the future design and development of training programs. The paper within have been index separately elsewhere.

  11. Elementary Students' Learning of Materials Science Practices Through Instruction Based on Engineering Design Tasks

    Science.gov (United States)

    Wendell, Kristen Bethke; Lee, Hee-Sun

    2010-12-01

    Materials science, which entails the practices of selecting, testing, and characterizing materials, is an important discipline within the study of matter. This paper examines how third grade students' materials science performance changes over the course of instruction based on an engineering design challenge. We conducted a case study of nine students who participated in engineering design-based science instruction with the goal of constructing a stable, quiet, thermally comfortable model house. The learning outcome of materials science practices was assessed by clinical interviews conducted before and after the instruction, and the learning process was assessed by students' workbooks completed during the instruction. The interviews included two materials selection tasks for designing a sturdy stepstool and an insulated pet habitat. Results indicate that: (1) students significantly improved on both materials selection tasks, (2) their gains were significantly positively associated with the degree of completion of their workbooks, and (3) students who were highly engaged with the workbook's reflective record-keeping tasks showed the greatest improvement on the interviews. These findings suggest the important role workbooks can play in facilitating elementary students' learning of science through authentic activity such as engineering design.

  12. Growing grass: a smart material interactive display, design and construction history

    NARCIS (Netherlands)

    Minuto, A.; Nijholt, Antinus

    2012-01-01

    In this paper we will present the design process and development of "Follow the Grass", our smart material interactive pervasive display, with related technical detailed explanation. We will present the design steps and prototypes with instructions for the use of smart materials (NiTiNOL) to create

  13. evaluation of teachers' use of instructional materials for teaching ...

    African Journals Online (AJOL)

    Global Journal

    The purpose of this survey was to evaluate the teachers' use of the instructional materials for teaching ... These and other benefits justify the teaching of .... The use of ICT is very effective for foreign language teaching and learning. 40. PRISCA ...

  14. Direct containment heating experiments in Zion Nuclear Power Plant geometry using prototypic materials

    International Nuclear Information System (INIS)

    Binder, J.L.; McUmber, L.M.; Spencer, B.W.

    1993-01-01

    Direct Containment Heating (DCH) experiments have been completed which utilize prototypic core materials. The experiments reported on here are a continuation of the Integral Effects Testing (IET) DCH program. The experiments incorporated a 1/40 scale model of the Zion Nuclear Power Plant containment structures. The model included representations of the primary system volume, RPV lower head, cavity and instrument tunnel, and the lower containment structures. The experiments were steam driven. Iron-alumina thermite with chromium was used as a core melt stimulant in the earlier IET experiments. These earlier IET experiments at Argonne National Laboratory (ANL) and Sandia National Laboratories (SNL) provided useful data on the effect of scale on DCH phenomena; however, a significant question concerns the potential experiment distortions introduced by the use of non-prototypic iron/alumina thermite. Therefore, further testing with prototypic materials has been carried out at ANL. Three tests have been completed, DCH-U1A, U1B and U2. DCH-U1A and U1B employed an inerted containment atmosphere and are counterpart to the IET-1RR test with iron/alumina thermite. DCH-U2 employed nominally the same atmosphere composition of its counterpart iron/alumina test, IET-6. All tests, with prototypic material, have produced lower peak containment pressure rises; 45, 111 and 185 kPa in U1A, U1B and U2, compared to 150 and 250 kPa IET-1RR and 6. Hydrogen production, due to metal-steam reactions, was 33% larger in U1B and U2 compared to IET-1RR and IET-6. The pressurization efficiency was consistently lower for the corium tests compared to the IET tests

  15. A research project to develop and evaluate a technical education component on materials technology for orientation to space-age technology

    Science.gov (United States)

    Jacobs, J. A.

    1976-01-01

    A project was initiated to develop, implement, and evaluate a prototype component for self-pacing, individualized instruction on basic materials science. Results of this project indicate that systematically developed, self-paced instruction provides an effective means for orienting nontraditional college students and secondary students, especially minorities, to both engineering technology and basic materials science. In addition, students using such a system gain greater chances for mastering subject matter than with conventional modes of instruction.

  16. The Influence of Instructional Materials on Academic Performance of ...

    African Journals Online (AJOL)

    This research work investigated the influence of instructional materials (teaching aids) on students' academic performance in senior secondary school Chemistry in Cross River State. A two group pre-test post test quasi-experimental design was adopted for the study. One research question and one hypothesis were ...

  17. Crime and Control: Syllabi and Instructional Materials for Criminology and Criminal Justice. Resource Materials for Teaching.

    Science.gov (United States)

    Deutschmann, Linda B., Ed.; Wright, Richard A., Ed.

    One of a series of resources for teaching sociology at the postsecondary level, this volume contains syllabi and instructional materials for courses in criminology and criminal justice. Material is divided into four sections. Section 1, innovative approaches to the teaching of criminology, contains four papers which discuss a corrections practicum…

  18. Teachers' perception of the utilization of instructional materials in ...

    African Journals Online (AJOL)

    This study aimed at assessing teachers' perception of utilization of instructional materials in teaching social studies in junior secondary schools in Calabar Municipality of Cross River State, Nigeria. The study was guided by a research question based on the purpose of the study. The study adopted the survey research ...

  19. Science with the ASTRI prototype

    International Nuclear Information System (INIS)

    Sartore, Nicola

    2013-01-01

    ASTRI (Astrofisica a Specchi con Tecnologia Replicante Italiana) is a “Flagship Project” financed by the Italian Ministry of Instruction, University and Research and led by the Italian National Institute of Astrophysics. It represents the Italian proposal for the development of the Small Size Telescope system of the Cherenkov Telescope Array, the next generation observatory for Very High Energy gamma-rays (20 GeV - 100 TeV). The ASTRI end-to-end prototype will be installed at Serra La Nave (Catania, Italy) and it will see the first light at the beginning of 2014. We describe the expected performance of the prototype on few selected test cases of the northern emisphere. The aim of the prototype is to probe the technological solutions and the nominal performance of the various telescope's subsystems

  20. Instruction understanding for intelligent robots in nuclear facilities

    International Nuclear Information System (INIS)

    Kambayashi, Shaw; Abe, Yasuaki

    1993-01-01

    As a first step to realize an autonomous mobile robot for plant maintenance, where the robot is capable to understand instructions written in natural languages, we have developed a prototype of instruction understanding system which makes the robot construct its motion sequences to approach instrumentations and inspect them from input sentences written in Japanese. In the prototype system, the instruction understanding and planning capabilities are integrated by an inference engine which consists of a cyclic operation of three processings, i.e., sensing, decision, and execution. Based on environmental data and current states of the robot, a proper process such as natural language processing is triggered by the decision part of the inference engine to accomplish the input instructions. The multiple- and dynamic-planning capabilities, which are necessary to cope with dynamic changes of environments surrounding the robot, are achieved by utilizing the cyclic inference engine together with a set of the inference packets which keep intermediate results of natural language processing and planning for respective input instructions. (orig.)

  1. Effect of Instructional vs. Authentic Video Materials on Introvert and Extrovert Iranian EFL Learners' Vocabulary Learning

    Directory of Open Access Journals (Sweden)

    Parya Isazadeh

    2016-10-01

    Full Text Available The study delved into the effect of instructional video materials vs. authentic video materials on vocabulary learning of extrovert and introvert Iranian EFL learners. To this end, Nelson proficiency test was administered to one hundred eighty (n=180 language learners. Considering 1 standard deviation above and below the mean score, one hundred twenty three (n=123 language learners were selected for the study. These participants were distributed into 4 experimental groups (with 25 learners and a control group (with 23 learners. Researcher-made vocabulary pretest and posttest which were designed using the vocabularies from the movies were also administered to the participants. The findings of the study after three weeks of treatment revealed that both authentic video materials and instructional video materials can have positive effect on vocabulary learning of Iranian EFL leaners. This effect, however, is not different among extrovert learners. It was also revealed that introvert EFL learners benefit more from authentic video materials. The findings of the study could be used by material developers or language teachers who may wish to use video materials in their classes. Keywords: Authentic video materials, Instructional video materials, Vocabulary learning, Introversion, Extroversion

  2. Unconscious learning processes: mental integration of verbal and pictorial instructional materials.

    Science.gov (United States)

    Kuldas, Seffetullah; Ismail, Hairul Nizam; Hashim, Shahabuddin; Bakar, Zainudin Abu

    2013-12-01

    This review aims to provide an insight into human learning processes by examining the role of cognitive and emotional unconscious processing in mentally integrating visual and verbal instructional materials. Reviewed literature shows that conscious mental integration does not happen all the time, nor does it necessarily result in optimal learning. Students of all ages and levels of experience cannot always have conscious awareness, control, and the intention to learn or promptly and continually organize perceptual, cognitive, and emotional processes of learning. This review suggests considering the role of unconscious learning processes to enhance the understanding of how students form or activate mental associations between verbal and pictorial information. The understanding would assist in presenting students with spatially-integrated verbal and pictorial instructional materials as a way of facilitating mental integration and improving teaching and learning performance.

  3. An Examination of Prereading Exercises: Recommendations for Form and Instruction on the Comprehension of Written Instructional Material.

    Science.gov (United States)

    Campbell, John Joseph

    This study investigated the effects of prereading exercises on the comprehension of written instructional material. The subjects were 210 community college freshmen who were required to enroll in a developmental reading course. All of the subjects had scored below the eighth percentile on the national norms of the Davis Reading Test. The subjects…

  4. The Needs for Multicultural Knowledge in Instructional Material on Theme 7 "Beautiful Diversity in My Country" Grade 4th Elementary School

    Directory of Open Access Journals (Sweden)

    Latifatul Jannah

    2017-08-01

    Full Text Available The aims of research consist of the following (1 to know need analysis of Curriculum 2013 instructional materials in elementary school (2 to develop instructional material based on multicultural values.The study employs descriptive qualitative method which the data are collected by interview,  observation, and document analysis.The observation and interview results about instructional materials of Curriculum 2013 in some elementary school in Surakarta consist of the following (1 teachers need additional materials in order to deliver suitable material of Curriculum2013 for students. (2 teachers get difficulties in selecting suitable additional material. (3 teachers need additional material which can develop students good characters by adding Indonesian multicultural knowledge in all subjects. By enriching and developing multicultural values for students so it can be integrated in instructional materials such as tolerance, nationalism, and spirit of unity in diversities.

  5. Prototyping in theory and in practice

    DEFF Research Database (Denmark)

    Yu, Fei; Brem, Alexander; Pasinell, Michele

    2018-01-01

    and functions of a prototype and needed to meet specific goals in order to push the process forward. Designers, on the other hand, used prototypes to investigate the design space for new possibilities, and were more open to a variety of prototyping materials and tools, especially for low-fidelity prototypes...

  6. Instructional Materials Physics High School with Multi Representation Approach

    Directory of Open Access Journals (Sweden)

    Yuvita Widi Astuti

    2014-06-01

    Full Text Available Bahan Ajar Fisika SMA dengan Pendekatan Multi Representasi Abstract: One effort to improve understanding of concepts and problem-solving skills in learning physics is to provide instructional materials in accordance with the characteristics of the students and help students learn. The purpose of this study are: (1 developing a high school physics teaching materials especially materials Rotation Dynamics and Equilibrium Rigid objects using multiple representations approach to improve the understanding of physics concepts, (2 test the effectiveness of instructional materials development results. This research method is the development of research using Dick & Carey model tailored to the needs of research. The research instrument used in the form of feasibility questionnaire. The type of data that is obtained is quantitative data and qualitative data. Experimental results show that the result of the development of teaching materials can be categorized as very feasible. Results of field trials showed that: (1 most of the students in the experimental class above KKM obtain test results, (2 the results of the experimental class postes greater than the control class, so that teaching materials said to be effective, but not significant to improve the understanding of physics concepts. Key Words: teaching materials, multi-representation, the rotational dynamics Abstrak: Salah satu upaya untuk meningkatkan pemahaman konsep dan kemampuan memecahkan masalah dalam pembelajaran fisika adalah dengan menyediakan bahan ajar yang sesuai dengan karakteristik siswa dan memudahkan siswa dalam belajar. Tujuan dari penelitian ini adalah: (1 mengembangkan bahan ajar fisika SMA khususnya materi Dinamika Rotasi dan Kesetimbangan Benda Tegar menggunakan pendekatan multi representasi untuk meningkatkan pemahaman konsep fisika, (2 menguji efektifitas bahan ajar hasil pengembangan. Metode penelitian ini adalah penelitian pengembangan menggunakan model Dick & Carey yang

  7. Interactive computer-based instruction: Basic material control and accounting demonstration

    International Nuclear Information System (INIS)

    Keisch, B.

    1993-01-01

    The use of interactive, computer-based training (CBT) courses can be a time- and resource-saving alternative to formal instruction in a classroom milieu. With CBT, students can proceed at their own pace, fit the study course into their schedule, and avoid the extra time and effort involved in travel and other special arrangements. The demonstration given here is an abbreviated, annotated version of a recently developed course in basic material control and accounting designed for the MC and A novice. The system used is ''Quest'' which includes multi-media capabilities, individual scoring, and built-in result-reporting capabilities for the course administrator. Efficient instruction and training are more important than ever because of the growing numbers of relatively inexperienced persons becoming active in safeguards

  8. Elementary Students' Learning of Materials Science Practices through Instruction Based on Engineering Design Tasks

    Science.gov (United States)

    Wendell, Kristen Bethke; Lee, Hee-Sun

    2010-01-01

    Materials science, which entails the practices of selecting, testing, and characterizing materials, is an important discipline within the study of matter. This paper examines how third grade students' materials science performance changes over the course of instruction based on an engineering design challenge. We conducted a case study of nine…

  9. Color Research and Its Application to the Design of Instructional Materials.

    Science.gov (United States)

    Pett, Dennis; Wilson, Trudy

    1996-01-01

    Reviews color research and considers its implications for the design of instructional materials. Topics include physiological and psychological effects; color and learning, including attention, search tasks, retention and other objective measures, and non-objective measures; color and the cathode ray tube (CRT); and further research needs.…

  10. Impacts of insufficient instructional materials on teaching biology: Higher education systems in focus

    Directory of Open Access Journals (Sweden)

    Sutuma Edessa

    2017-01-01

    Full Text Available Abstract The purpose of this study was to assess and determine impacts of insufficient instructional materials and ineffective lesson delivery methods on teaching in biology higher education. The participants of this study were 60 trainees who graduated in Bachelor of Sciences from eight public universities in majoring biology. Data for the study was collected while these trainees were attending the course of Biology Teaching Methods in the Post Graduate Diploma in Teaching, both in the regular and summer 2015/2016 training programs at Addis Ababa University. The study employs a mixed method design of both qualitative and quantitative data evaluations. Data was collected through classroom observations and interviews with the trainees. The findings indicated that insufficient instructional materials and ineffective teaching methods in higher education had negative impacts; that have affected the skills of performing biological tasks of graduates 71%. In the course of the Post Graduate Diploma in Teaching training, trainees were unsuccessful to conduct essential biological tasks expected from graduates of biology upon the completion of their undergraduate study program. The study was concluded with emphasis on the need to integrate theory and practice through using adequate instructional materials and proper teaching methods in the higher education biology teaching.

  11. The Use of Instructional Materials in the Teaching and Learning of ...

    African Journals Online (AJOL)

    The study sought to examine the extent to which instructional material have been used in the teaching and learning of Environmental Studies in the Primary Schools in Winneba. Purposive sampling was used to select 80 respondents comprising 60 Environmental Studies teachers and 20 pupils drawn from six public ...

  12. The Common Core State Standards and the Role of Instructional Materials: A Case Study on EdReports.org

    Science.gov (United States)

    Watt, Michael G.

    2016-01-01

    The purpose of this study was to review research studies investigating the role of instructional materials in relation to the Common Core State Standards and to evaluate whether a new organisation, EdReports.org, founded to evaluate the alignment of instructional materials to the Common Core State Standards, has achieved its objectives. Content…

  13. 7 CFR 330.210a - Administrative instructions listing approved packing materials for plant pests.

    Science.gov (United States)

    2010-01-01

    ... materials for plant pests. 330.210a Section 330.210a Agriculture Regulations of the Department of... PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Plant Pests § 330.210a Administrative instructions listing approved packing materials for plant pests. (a) The...

  14. TiO2--a prototypical memristive material.

    Science.gov (United States)

    Szot, K; Rogala, M; Speier, W; Klusek, Z; Besmehn, A; Waser, R

    2011-06-24

    Redox-based memristive switching has been observed in many binary transition metal oxides and related compounds. Since, on the one hand, many recent reports utilize TiO(2) for their studies of the memristive phenomenon and, on the other hand, there is a long history of the electronic structure and the crystallographic structure of TiO(2) under the impact of reduction and oxidation processes, we selected this material as a prototypical material to provide deeper insight into the mechanisms behind memristive switching. In part I, we briefly outline the results of the historical and recent studies of electroforming and resistive switching of TiO(2)-based cells. We describe the (tiny) stoichiometrical range for TiO(2 - x) as a homogeneous compound, the aggregation of point defects (oxygen vacancies) into extended defects, and the formation of the various Magnéli phases. Furthermore, we discuss the driving forces for these solid-state reactions from the thermodynamical point of view. In part II, we provide new experimental details about the hierarchical transformation of TiO(2) single crystals into Magnéli phases, and vice versa, under the influence of chemical, electrical and thermal gradients, on the basis of the macroscopic and nanoscopic measurements. Those include thermogravimetry, high-temperature x-ray diffraction (XRD), high-temperature conductivity measurements, as well as low-energy electron diffraction (LEED), x-ray photoelectron spectroscopy (XPS), and LC-AFM (atomic force microscope equipped with a conducting tip) studies. Conclusions are drawn concerning the relevant parameters that need to be controlled in order to tailor the memristive properties.

  15. Using a home blood pressure monitor: do accompanying instructional materials meet low literacy guidelines?

    Science.gov (United States)

    Wallace, Lorraine S; Keenum, Amy J

    2008-08-01

    To evaluate the readability and related features of English language Quick Reference Guides (QRGs) and User Manuals (UMs) accompanying home blood pressure monitors (HBPMs). We evaluated QRGs and UMs for 22 HBPMs [arm (n=12); wrist (n=10)]. Using established criteria, we evaluated reading grade level, language availability, dimensions, text point size, use of illustrations, layout/formatting characteristics, and emphasis of key points of English-language patient instructions accompanying HBPMs. Readability was calculated using McLaughlin's Simplified Measure of Gobbledygoop. Items from the Suitability of Materials Assessment and User-Friendliness Tool were used to assess various layout features. Simplified Measure of Gobbledygoop scores of both QRGs (mean+/-SD=9.1+/-0.8) and UMs (9.3+/-0.8) ranged from 8th to 10th grade. QRGs and UMs presented steps in chronological order, used active voice throughout, avoided use of specialty fonts, focused on need to know, and used realistic illustrations. Seven sets of instructions included all seven key points related to proper HPBM use, whereas three sets of instructions included less than or equal to three key points (mean=4.8+/-1.9). Although most QRGs and UMs met at least some recommended low-literacy formatting guidelines, all instructional materials should be developed and tested to meet the needs of the patient population at large. Key points related to proper HBPM use should not only be included within these instructions, but highlighted to emphasize their importance.

  16. BIBLIOGRAPHY ON INDIVIDUALIZED INSTRUCTION.

    Science.gov (United States)

    Harvard Univ., Cambridge, MA. Graduate School of Education.

    THIS BIBLIOGRAPHY LISTS MATERIAL ON VARIOUS ASPECTS OF INDIVIDUALIZED INSTRUCTION. APPROXIMATELY 85 UNANNOTATED REFERENCES ARE PROVIDED TO DOCUMENTS DATING FROM 1958 TO 1966. JOURNALS, BOOKS, AND REPORT MATERIALS ARE LISTED. SUBJECT AREAS INCLUDED ARE PROGRAMED INSTRUCTION, TEACHING MACHINES, RESPONSE MODE, SELF-INSTRUCTION, AND COMPUTER-ASSISTED…

  17. Pre-Service Science Teachers Views on STEM Materials and STEM Competition in Instructional Technologies and Material Development Course

    Science.gov (United States)

    Cetin, Ali; Balta, Nuri

    2017-01-01

    This qualitative study was designed to introduce STEM (Science, Technology, Engineering, Mathematics) activities to preservice science teachers and identify their views about STEM materials. In this context, a competition was organized with 42 preservice science teachers (13 male- 29 female) who took Instructional Technologies and Material…

  18. Instruction in the responsible conduct of research: an inventory of programs and materials within CTSAs.

    Science.gov (United States)

    DuBois, James M; Schilling, Debie A; Heitman, Elizabeth; Steneck, Nicholas H; Kon, Alexander A

    2010-06-01

    The National Institutes of Health (NIH) require instruction in the responsible conduct of research (RCR) as a component of any Clinical and Translational Science Award (CTSA). The Educational Materials Group of the NIH CTSA Consortium's Clinical Research Ethics Key Function Committee (CRE-KFC) conducted a survey of the 38 institutions that held CTSA funding as of January 2009 to determine how they satisfy RCR training requirements. An 8-item questionnaire was sent by email to directors of the Clinical Research Ethics, the Educational and Career Development, and the Regulatory Knowledge cores. We received 78 completed surveys from 38 CTSAs (100%). We found that there is no unified approach to RCR training across CTSAs, many programs lack a coherent plan for RCR instruction, and most CTSAs have not developed unique instructional materials tailored to the needs of clinical and translational scientists. We recommend collaboration among CTSAs and across CTSA key function committees to address these weaknesses. We also requested that institutions send electronic copies of original RCR training materials to share among CTSAs via the CTSpedia website. Twenty institutions submitted at least one educational product. The CTSpedia now contains more than 90 RCR resources.

  19. Examining the Types, Features, and Use of Instructional Materials in Afterschool Science

    Science.gov (United States)

    D'Angelo, Cynthia M.; Harris, Christopher J.; Lundh, Patrik; House, Ann; Leones, Tiffany; Llorente, Carlin

    2017-01-01

    Afterschool programs have garnered much attention as promising environments for learning where children can engage in rich science activities. Yet, little is known about the kinds of instructional materials used in typical, large-scale afterschool programs that implement science with diverse populations of children. In this study, we investigated…

  20. Remembering George Washington: What Do Instructional Materials Teach Us about Washington's Patriotism?

    Science.gov (United States)

    Fitzgerald, Jason C.

    2011-01-01

    History textbooks have long been criticized for their adherence to the "stabilized national narrative" (VanSledright 1998). However, teachers need to also be aware of the ideological influences of the supplemental instructional materials they choose. A case study of the Donald W. Reynolds Museum and Education Center at Mount Vernon illustrates…

  1. Fellowship Program in the Design and Development of Instructional Materials. Final Report.

    Science.gov (United States)

    Fleming, Malcolm; Pett, Dennis

    A two-year graduate program leading to a specialists's degree was administered to train individuals in the design of instructional materials for elementary, secondary, vocational and special education curricula. The program sought to achieve a multiplier effect by placing its graduates in positions in which they could help other educators to…

  2. Wind Power. Instructional Materials.

    Science.gov (United States)

    Jordan, Kenneth; Thessing, Dan

    This document is one of five learning packets on alternative energy developed as part of a descriptive curriculum research project in Arkansas (see note). The overall objectives of the learning packets are to improve the level of instruction in the alternative energies by vocational exploration teachers, and to facilitate the integration of new…

  3. Nuclear Energy. Instructional Materials.

    Science.gov (United States)

    Jordan, Kenneth; Thessing, Dan

    This document is one of five learning packets on alternative energy (see note) developed as part of a descriptive curriculum research project in Arkansas. The overall objectives of the learning packets are to improve the level of instruction in the alternative energies by vocational exploration teachers, and to facilitate the integration of new…

  4. A Model for Producing and Sharing Instructional Materials in Veterinary Medicine. Final Report.

    Science.gov (United States)

    Ward, Billy C.; Niec, Alphonsus P.

    This report describes a study of factors which appear to influence the "shareability" of audiovisual materials in the field of veterinary medicine. Specific factors addressed are content quality, instructional effectiveness, technical quality, institutional support, organization, logistics, and personal attitudes toward audiovisuals. (Author/CO)

  5. On the interpretation of micro-PIXE measurements on a prototype microstructured reference material

    International Nuclear Information System (INIS)

    Waetjen, Uwe; Barsony, Istvan; Grime, Geoff W.; Rajta, Istvan

    1999-01-01

    In order to determine the beam spot size and scanning properties of ion microbeam systems, a novel reference material has been developed, consisting of permalloy (81% Ni, 19% Fe) strip patterns on silicon substrate. Due to the choice of substrate and pattern materials, these samples exhibit a high elemental contrast suitable for analysis with X-ray detection and ion scattering techniques. The microlithographic production scheme is briefly described. A prototype chip of this material was investigated with PIXE and RBS analysis in a scanning nuclear microprobe. It proved to be extremely useful in the routine to focus the ion microbeam and to determine its spot size. Due to the microscopic structure of these samples, a geometric dependence of matrix effects in the production of Si X-rays from the substrate material could be shown. Even dead-time effects in the counting electronics, showing up as an apparent thickness gradient, could be observed. Besides its primary role in microbeam diagnostics, this reference material can serve an educational role in developing the analyst's ability to correctly identify and interpret such artefacts

  6. Using Think-Aloud Protocols to Uncover Misconceptions and Improve Developmental Math Instruction: An Exploratory Study

    Directory of Open Access Journals (Sweden)

    Charles Secolsky

    2016-01-01

    Full Text Available Deficiencies in education continue to escalate around the world. The focus on outcomes assessment has narrowed instructional research and curriculum evaluation to standardized testing in certain subject areas. A prototype for a quantitative literacy assessment instrument was developed with the goal of diagnosing student misconceptions of basic mathematics content and changing instructional practices to undo the misconceptions by applying cognitive psychological theory. Two hundred thirty-eight basic math high school students and 209 remedial community college students in New Jersey and New York were administered the instrument, which had been based on coded data from think-aloud protocols. The instrument asked students to answer 20 basic mathematics items and, in addition, to evaluate four possible solution strategies. For each item, frequencies of selected solution strategies and the association between strategy selection and performance on the 20-question math test are presented as a means for improving instruction. Follow-up research is proposed for determining whether undoing the student misconceptions first before teaching material on a new unit of instruction may yield more positive student outcomes.

  7. Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources Materials. Supplement 34, 1988.

    Science.gov (United States)

    Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

    The Environmental Quality Instructional Resources Center in Columbus, Ohio, acquires, reviews, indexes, and announces both print (books, modules, units, etc.) and non-print (films, slides, video tapes, etc.) materials related to water quality and water resources education and instruction. In addition some materials related to pesticides, hazardous…

  8. Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources Materials. Supplement 32, 1987.

    Science.gov (United States)

    Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

    The Environmental Quality Instructional Resources Center in Columbus, Ohio, acquires, reviews, indexes, and announces both print (books, modules, units, etc.) and non-print (films, slides, video tapes, etc.) materials related to water quality and water resources education and instruction. In addition some materials related to pesticides, hazardous…

  9. DECS tries out instructional materials on AIDS prevention education.

    Science.gov (United States)

    1994-01-01

    A national try-out of the newly developed print and non-print instructional materials on AIDS Education is being conducted by the Department of Education, Culture and Sports (DECS) this school year 1993-to 1994. To determine the effectiveness of these materials, various public and private schools in Region IV (Southern Tagalog), VII (Central Visayas) XI (Southern Mindanao) and National Capital Region (Metro, Manila) were chosen as try-out institutions. The AIDS education materials will be tried out in different subjects in some grade and year levels such as civics and culture (grade one); science and health (grades three and six); home economics and livelihood education (grade five); physical education, health and music (second year) and Pilipino Language (third year). The materials for the elementary level consist of posters, cut-out pictures, voice tapes, jingles, talking books and slides, while the secondary school level utilizes modules. For the tertiary level, a Resource Book on AIDS Prevention Education is used by the Teacher Training Institutions and the Non-Formal Education employs the Facilitator's Guide for Levels I-III. These materials will be tried out in both urban and rural schools, with control school and experimental school at each level. full text

  10. Designing Preclinical Instruction of Psychomotor Skills (IV)--Instructional Engineering: Evaluation Phase.

    Science.gov (United States)

    Guenzel, Pamela J.; And Others

    1995-01-01

    The fourth article in a four-part series on instructional design discusses evaluation of a psychomotor skills unit taught in preclinical dental education. Issues examined include piloting of instructional materials, analysis and revision of materials based on student performance, syllabus design and content, influence of faculty characteristics,…

  11. Concurrent Development and Cost-Benefit Analysis of Paper-Based and Digitized Instructional Material.

    Science.gov (United States)

    Annand, David

    2002-01-01

    Describes the simultaneous development of paper-based and digitized versions of a textbook and related instructional material used in an undergraduate, independent study, distance education course at Athabasca University (Canada). Used break-even analysis as an initial evaluation measure to determine cost-effectiveness, and discusses the next…

  12. Materials performance in prototype Thermal Cycling Absorption Process (TCAP) columns

    International Nuclear Information System (INIS)

    Clark, E.A.

    1992-01-01

    Two prototype Thermal Cycling Absorption Process (TCAP) columns have been metallurgically examined after retirement, to determine the causes of failure and to evaluate the performance of the column container materials in this application. Leaking of the fluid heating and cooling subsystems caused retirement of both TCAP columns, not leaking of the main hydrogen-containing column. The aluminum block design TCAP column (AHL block TCAP) used in the Advanced Hydride Laboratory, Building 773-A, failed in one nitrogen inlet tube that was crimped during fabrication, which lead to fatigue crack growth in the tube and subsequent leaking of nitrogen from this tube. The Third Generation stainless steel design TCAP column (Third generation TCAP), operated in 773-A room C-061, failed in a braze joint between the freon heating and cooling tubes (made of copper) and the main stainless steel column. In both cases, stresses from thermal cycling and local constraint likely caused the nucleation and growth of fatigue cracks. No materials compatibility problems between palladium coated kieselguhr (the material contained in the TCAP column) and either aluminum or stainless steel column materials were observed. The aluminum-stainless steel transition junction appeared to be unaffected by service in the AHL block TCAP. Also, no evidence of cracking was observed in the AHL block TCAP in a location expected to experience the highest thermal shock fatigue in this design. It is important to limit thermal stresses caused by constraint in hydride systems designed to work by temperature variation, such as hydride storage beds and TCAP columns

  13. The Creativity Dimension of Instructional Materials Designed by Prospective Teachers: The Comparison across Domains

    Directory of Open Access Journals (Sweden)

    Ersoy Esen

    2017-01-01

    Full Text Available This study aims at revealing the creativity dimension of the materials designed and developed by the second year students studying at the department of Computer Education and Instructional Technology. A part of the participants has completed the process by designing materials in their own field, information technologies; while some of them have done so by designing materials in the field of mathematics. The data have been retrieved from an experimental study of 13 weeks. “Teaching Material Creativity Rubric” developed by the researchers, has been used as the data collection tool. The rubric has been developed in order to evaluate the creativity dimensions of products. While developing the rubric, the creative product evaluation dimensions of [14] have been a source of inspiration. The products developed by the students have been evaluated through the retrieved data, in terms of their creativity. The rubric developed includes Originality, Practicality & Sensibility, Productivity & Flexibility, Feasibility, Inclusiveness, and Insightfulness dimensions. In this research, the data of the aforementioned dimensions and sub-dimensions have been evaluated. The results present that the creativity level of the products on teaching information technologies, which have been developed by Computer Education and Instructional Technology (CEIT students, is high. It has been argued that the creativity of domain-specifically developed materials is higher, through literature. Keywords: Material Design in Computers, Mathematics Teaching, Originality, Applicability, Creativity, Creativity and Domainswords.

  14. Evaluation: Processes and Practices. Selected Papers from the Conference for the Evaluation of Instructional Materials (Washington, D.C., April 5-6, 1968).

    Science.gov (United States)

    Swisher, Ginny, Ed.; And Others

    Selected papers from the Conference for the Evaluation of Instructional Materials treat the area of evaluation by describing Richard Dershimer's three-part evaluative schema, the Educational Products Information Exchange approach to evaluating instructional materials, the evaluation procedures in Montgomery county (Maryland), the Consumers Union…

  15. Impacts of Insufficient Instructional Materials on Teaching Biology: Higher Education Systems in Focus

    Science.gov (United States)

    Edessa, Sutuma

    2017-01-01

    The purpose of this study was to assess and determine impacts of insufficient instructional materials and ineffective lesson delivery methods on teaching in biology higher education. The participants of this study were 60 trainees who graduated in Bachelor of Sciences from eight public universities in majoring biology. Data for the study was…

  16. DEVELOPMENT OF MULTIMEDIA-BASED INSTRUCTIONAL OF NATURAL SCIENCE IN SOLAR SYSTEM MATERIAL IN THE GRADE IX FOR HEARING IMPAIRMENT STUDENTS

    Directory of Open Access Journals (Sweden)

    Nurvita Dwi Andriani

    2016-12-01

    Full Text Available Hearing impairment students have limitation in obtaining information. Hearing impairment students needs a multimedia-based instructional to visualize a subject matter as a learning experience. This study was aimed at producing a theoretically and empirically valid multimedia-based instructional of Natural Science in Solar System material which is reviewed by experts and could be implemented in Segment B of SMPLB (Hearing impairment students. This study employed a research and development (R&D model by William W. Lee and Diana L. Owens. Overall, the multimedia-based instructional of Natural Science in Solar System material for Segment B of SMPLB (Hearing impairment students was valid

  17. The Model of the Development of Instructional Material for Enhancing Students' English Speaking Skills at Elementary Schools in Bandar Lampung

    OpenAIRE

    Sutiyono, Akhmad

    2014-01-01

    The main problem of the research is what instructional material that should be developed to enhance students' speaking skills. The main objective of this research is to develop English instructional material for enhancing students' speaking skills at elementary schools. In conducting the research, the writer used Research and Development method. The data of the research were collected through observation, questionnaire, interview, test, and documentation. The validation of the model was carri...

  18. USING QTM AS AN INSTRUCTIONAL MODEL FOR TEACHING READING COMPREHENSION

    Directory of Open Access Journals (Sweden)

    Koeswandi Koeswandi

    2017-04-01

    Full Text Available This research was motivated by the needs for an appropriate English reading comprehension instructional model in Junior High School students. The aims of this research are (1 to describe the qualities of a present guideline for an English instructional model of reading comprehension; (2 to describe the qualities of the existing English instructional model of reading comprehension used in Junior High School; (3 to get the deeply information on the needs towards design; (4 to construct the prototype model of English instructional model of reading comprehension using Quantum Teaching Model (QTM; and (5 to evaluate strengths and weaknesses of the prototype model. The research has used R & D which was conducted in three phases. The first has exploration phase which consists of evaluating the qualities of a present guideline for EIMRC used in JHS in Pemalang Regency, and to analyze the needs of EIMRC using QTM. The second was prototype development phase where the prototype model was constructed and tried out. The last was expert validation in which experts and practitioners were involved to review the model in order to help the refinement. The data were collected from document analysis, in-depth interview, classroom observation, FGD, Tryout and expert judgment. The data were then analyzed by using descriptive-qualitative and interactive analysis. The results of the research showed that the qualities of the present model were fair. Meanwhile, the result of need analysis pointed out that the teachers and the students need the model of EIMRC using QTM. However, the model needs to be revised for the refinement, particularly in terms of mechanical aspects and grammatical points. The research findings conclude that the use of EIMRC using QTM in JHS in Pemalang Regency empirically can improve the students‘ motivation and interaction in RC teaching and Learning activities and increase their reading comprehension achievement. These findings recommend that

  19. Emerging Prototype Sodium-Ion Full Cells with Nanostructured Electrode Materials.

    Science.gov (United States)

    Ren, Wenhao; Zhu, Zixuan; An, Qinyou; Mai, Liqiang

    2017-06-01

    Due to steadily increasing energy consumption, the demand of renewable energy sources is more urgent than ever. Sodium-ion batteries (SIBs) have emerged as a cost-effective alternative because of the earth abundance of Na resources and their competitive electrochemical behaviors. Before practical application, it is essential to establish a bridge between the sodium half-cell and the commercial battery from a full cell perspective. An overview of the major challenges, most recent advances, and outlooks of non-aqueous and aqueous sodium-ion full cells (SIFCs) is presented. Considering the intimate relationship between SIFCs and electrode materials, including structure, composition and mutual matching principle, both the advance of various prototype SIFCs and the electrochemistry development of nanostructured electrode materials are reviewed. It is noted that a series of SIFCs combined with layered oxides and hard carbon are capable of providing a high specific gravimetric energy above 200 Wh kg -1 , and an NaCrO 2 //hard carbon full cell is able to deliver a high rate capability over 100 C. To achieve industrialization of SIBs, more systematic work should focus on electrode construction, component compatibility, and battery technologies. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. The Prototype as Mediator of Embodied Experience in Fashion Design

    DEFF Research Database (Denmark)

    Kristensen, Tore; Ræbild, Ulla

    . It is based on photographic material obtained in design studios during prototype development. The prototype is considered a core fashion design competence. Yet, companies increasingly cut costs by reducing or omitting prototype development. We intend to show, how the garment prototype acts as an important...

  1. Effect of Instructional vs. Authentic Video Materials on Introvert and Extrovert Iranian EFL Learners' Vocabulary Learning

    Science.gov (United States)

    Isazadeh, Parya; Makui, Selma Mohammad Zadeh; Ansarian, Loghman

    2016-01-01

    The study delved into the effect of instructional video materials vs. authentic video materials on vocabulary learning of extrovert and introvert Iranian EFL learners. To this end, Nelson proficiency test was administered to one hundred eighty (n = 180) language learners. Considering 1 standard deviation above and below the mean score, one hundred…

  2. Construction of crystal structure prototype database: methods and applications.

    Science.gov (United States)

    Su, Chuanxun; Lv, Jian; Li, Quan; Wang, Hui; Zhang, Lijun; Wang, Yanchao; Ma, Yanming

    2017-04-26

    Crystal structure prototype data have become a useful source of information for materials discovery in the fields of crystallography, chemistry, physics, and materials science. This work reports the development of a robust and efficient method for assessing the similarity of structures on the basis of their interatomic distances. Using this method, we proposed a simple and unambiguous definition of crystal structure prototype based on hierarchical clustering theory, and constructed the crystal structure prototype database (CSPD) by filtering the known crystallographic structures in a database. With similar method, a program structure prototype analysis package (SPAP) was developed to remove similar structures in CALYPSO prediction results and extract predicted low energy structures for a separate theoretical structure database. A series of statistics describing the distribution of crystal structure prototypes in the CSPD was compiled to provide an important insight for structure prediction and high-throughput calculations. Illustrative examples of the application of the proposed database are given, including the generation of initial structures for structure prediction and determination of the prototype structure in databases. These examples demonstrate the CSPD to be a generally applicable and useful tool for materials discovery.

  3. Construction of crystal structure prototype database: methods and applications

    International Nuclear Information System (INIS)

    Su, Chuanxun; Lv, Jian; Wang, Hui; Wang, Yanchao; Ma, Yanming; Li, Quan; Zhang, Lijun

    2017-01-01

    Crystal structure prototype data have become a useful source of information for materials discovery in the fields of crystallography, chemistry, physics, and materials science. This work reports the development of a robust and efficient method for assessing the similarity of structures on the basis of their interatomic distances. Using this method, we proposed a simple and unambiguous definition of crystal structure prototype based on hierarchical clustering theory, and constructed the crystal structure prototype database (CSPD) by filtering the known crystallographic structures in a database. With similar method, a program structure prototype analysis package (SPAP) was developed to remove similar structures in CALYPSO prediction results and extract predicted low energy structures for a separate theoretical structure database. A series of statistics describing the distribution of crystal structure prototypes in the CSPD was compiled to provide an important insight for structure prediction and high-throughput calculations. Illustrative examples of the application of the proposed database are given, including the generation of initial structures for structure prediction and determination of the prototype structure in databases. These examples demonstrate the CSPD to be a generally applicable and useful tool for materials discovery. (paper)

  4. Instructional Materials for Improving the Quality of the Environment. Information Bulletin. No. 2, 1985.

    Science.gov (United States)

    Disinger, John F.; Blosser, Patricia E., Ed.

    Three major themes of ecology, ethics, and economics characterize the current conservation/environmental movement and present a challenge for the environmental educator in teaching about environmental quality. This bulletin provides assistance for the practitioner by identifying current instructional materials that address concerns in this area.…

  5. The Tools of Teacher Education: Preservice Teachers' Use of Technology To Create Instructional Materials.

    Science.gov (United States)

    Roberts, Sherron Killingsworth; Hsu, Ying-Shao

    2000-01-01

    Examines the effectiveness/efficiency of preservice teachers' use of technology to create instructional materials developed in an undergraduate reading/language arts course. Results showed no significant difference between measures of overall quality of the technology assistance as compared to handmade prompts. Eighty-five percent of the teachers…

  6. Developing an Instructional Material Using a Concept Cartoon Adapted to the 5E Model: A Sample of Teaching Erosion

    Science.gov (United States)

    Birisci, Salih; Metin, Mustafa

    2010-01-01

    Using different instructional materials adapted within the constructivist learning theory will enhance students' conceptual understanding. From this point of view, an instructional instrument using a concept cartoon adapted with 5E model has developed and introduced in this study. The study has some deficiencies in investigating students'…

  7. Review on CNC-Rapid Prototyping

    International Nuclear Information System (INIS)

    M Nafis O Z; Nafrizuan M Y; Munira M A; Kartina J

    2012-01-01

    This article reviewed developments of Computerized Numerical Control (CNC) technology in rapid prototyping process. Rapid prototyping (RP) can be classified into three major groups; subtractive, additive and virtual. CNC rapid prototyping is grouped under the subtractive category which involves material removal from the workpiece that is larger than the final part. Richard Wysk established the use of CNC machines for rapid prototyping using sets of 2½-D tool paths from various orientations about a rotary axis to machine parts without refixturing. Since then, there are few developments on this process mainly aimed to optimized the operation and increase the process capabilities to stand equal with common additive type of RP. These developments include the integration between machining and deposition process (hybrid RP), adoption of RP to the conventional machine and optimization of the CNC rapid prototyping process based on controlled parameters. The article ended by concluding that the CNC rapid prototyping research area has a vast space for improvement as in the conventional machining processes. Further developments and findings will enhance the usage of this method and minimize the limitation of current approach in building a prototype.

  8. A Study of the Influence of Advertising Techniques on Selection of Instructional Reading Materials by Prospective Teachers.

    Science.gov (United States)

    Greenlaw, M. Jean; And Others

    This study examined the effect of three different modes of presentation on elementary education majors' selection and rating of materials for reading instruction. Materials were chosen to represent each of the following propaganda techniques: glittering generalities, name calling, transfer, testimonial, bandwagon, and card stacking. Students in…

  9. Study of electroless nickel plating on PerFactoryTM rapid prototype model

    OpenAIRE

    J.C. Rajaguru; C. Au, M. Duke

    2012-01-01

    This paper presents an investigation of electroless nickel plating on PerFactoryTM rapid prototype model built on PerFactoryTM R05 material. PerFactoryTM R05 is acrylic based photo sensitive resin. It is a popular material in rapid prototyping using PerFactoryTM method which employs addictive manufacturing technique to build prototypes for visual inspection, assembly etc. Metallization of such a prototype can extend the application envelop of the rapid prototyping technique as they can be use...

  10. Guide to Effective Business Practices in Buying School Supplies, Instructional Materials, Equipment and Services.

    Science.gov (United States)

    Association of School Business Officials International, Reston, VA.

    This guide to effective business practices is intended to assist schools in establishing general policies and procedures for buying supplies, instructional materials, equipment, and services. Federal, state, and local laws must be considered in addition to the recommendations made in this report. Practical guidelines are given for selecting…

  11. A Method to Represent Heterogeneous Materials for Rapid Prototyping: The Matryoshka Approach.

    Science.gov (United States)

    Lei, Shuangyan; Frank, Matthew C; Anderson, Donald D; Brown, Thomas D

    The purpose of this paper is to present a new method for representing heterogeneous materials using nested STL shells, based, in particular, on the density distributions of human bones. Nested STL shells, called Matryoshka models, are described, based on their namesake Russian nesting dolls. In this approach, polygonal models, such as STL shells, are "stacked" inside one another to represent different material regions. The Matryoshka model addresses the challenge of representing different densities and different types of bone when reverse engineering from medical images. The Matryoshka model is generated via an iterative process of thresholding the Hounsfield Unit (HU) data using computed tomography (CT), thereby delineating regions of progressively increasing bone density. These nested shells can represent regions starting with the medullary (bone marrow) canal, up through and including the outer surface of the bone. The Matryoshka approach introduced can be used to generate accurate models of heterogeneous materials in an automated fashion, avoiding the challenge of hand-creating an assembly model for input to multi-material additive or subtractive manufacturing. This paper presents a new method for describing heterogeneous materials: in this case, the density distribution in a human bone. The authors show how the Matryoshka model can be used to plan harvesting locations for creating custom rapid allograft bone implants from donor bone. An implementation of a proposed harvesting method is demonstrated, followed by a case study using subtractive rapid prototyping to harvest a bone implant from a human tibia surrogate.

  12. Contribution of prototypic material tests on the Plinius platform to the study of nuclear reactor severe accident

    International Nuclear Information System (INIS)

    Journeau, Ch.

    2008-01-01

    The PLINIUS experimental platform at CEA Cadarache is dedicated to the experimental study of nuclear reactor severe accidents thanks to experiments between 2000 and 3500 K with prototypic corium. Corium is the mixture that would be formed by an hypothetical core melting and its mixing with structural materials. Prototypical corium has the same chemical composition as the corium corresponding to a given accident scenario but has a different isotopic composition (use of depleted uranium,...). Research programs and test series have been performed to study corium thermophysical properties, fission product behaviour, corium spreading, solidification and interaction with concrete as well as its coolability. It was the frame of research training of many students and was realized within national, European and international collaborations. (author)

  13. Development of innovative classroom instruction material for enhancing creative teaching and learning nuclear topics: A proposal

    International Nuclear Information System (INIS)

    Puse, Judeza S.; Awata, Takaaki; Atobe, Kozo

    2005-01-01

    The role of education all over the world is becoming more and more significant and requires an in depth study since the life of the people is advanced, expanded and complicated. Educators are once again asked to address problems which have arisen within their own society. Thus, the search for ways to improve quality of education is global especially in line with nuclear science and technology. One area of focus is that managing and promoting learning inside the classroom, how teacher's utilized instructional materials were such an issue. Indeed, qualifications and resources are not the only factors that influence teachers' effectiveness, equally important are teachers' motivation, commitment, resourcefulness, innovativeness and creativeness in dealing with instructional materials. Lack of these things will produce poor attendance and unprofessional attitudes towards students. This paper aims to present a proposal on the use of innovative teaching device from the sample photographs as a result of the experiment taken at Kyoto University Research Reactor Institute (KURRI) where samples were treated with gamma rays from a radioactive source 60 Co and lately exposed to photographic giving rise to understanding of photons emitted by radioactive material in a form of electromagnetic waves and later converted into visible light in a more authentic and simplified manners. As a consequent, this proposal was made to enhance teaching and encourage science teachers to exert great effort to develop instructional materials specifically in this area that requires the concretization of concepts which could not be detected by human senses. (author)

  14. Developing IEC prototypes for adolescents. IEC workshop.

    Science.gov (United States)

    1997-01-01

    Participants of the IEC Workshop for the Production of OHP Material on Reproductive Health for Adolescents and Young Adults held November 25-30 in Japan developed innovative, visually appealing overhead projector (OHP) transparencies to serve as prototype information, education, and communication (IEC) materials for the Asian Region. The materials cover a wide range of topics from early marriage to unwanted pregnancy. This paper briefly describes the prototypes. One group focused upon early marriage, an issue of considerable importance to the health and welfare of young women in countries such as Bhutan, India, and Nepal. Participants from China, Laos, Malaysia, and Thailand focused upon the issue of gender equality, while a third group developed OHP material to teach a range of issues related to young people's sexual and reproductive health. Finally, the fourth group, drawn from Indonesia, the Philippines, and Vietnam, focused upon the topic of menstruation with a prototype targeted to boys and girls aged 9-14 years. Boys were included to foster their understanding of menstruation as a natural phenomenon.

  15. Open-Source Wax RepRap 3-D Printer for Rapid Prototyping Paper-Based Microfluidics.

    Science.gov (United States)

    Pearce, J M; Anzalone, N C; Heldt, C L

    2016-08-01

    The open-source release of self-replicating rapid prototypers (RepRaps) has created a rich opportunity for low-cost distributed digital fabrication of complex 3-D objects such as scientific equipment. For example, 3-D printable reactionware devices offer the opportunity to combine open hardware microfluidic handling with lab-on-a-chip reactionware to radically reduce costs and increase the number and complexity of microfluidic applications. To further drive down the cost while improving the performance of lab-on-a-chip paper-based microfluidic prototyping, this study reports on the development of a RepRap upgrade capable of converting a Prusa Mendel RepRap into a wax 3-D printer for paper-based microfluidic applications. An open-source hardware approach is used to demonstrate a 3-D printable upgrade for the 3-D printer, which combines a heated syringe pump with the RepRap/Arduino 3-D control. The bill of materials, designs, basic assembly, and use instructions are provided, along with a completely free and open-source software tool chain. The open-source hardware device described here accelerates the potential of the nascent field of electrochemical detection combined with paper-based microfluidics by dropping the marginal cost of prototyping to nearly zero while accelerating the turnover between paper-based microfluidic designs. © 2016 Society for Laboratory Automation and Screening.

  16. ‘Big Books’ as Mother Tongue-Based Instructional Materials in Bicol for Grade One Pupils

    Directory of Open Access Journals (Sweden)

    Magdalena M. Ocbian,

    2015-11-01

    Full Text Available Language experts claim that it is easier for pupils to learn when the mother tongue is used in the teaching learning process including the learning of a second language. This study determined the reading comprehension level of Grade I pupils in Bulusan Central School for school year 2013-2014 as input in developing big books written in the vernacular that can be used as reading materials for Grade 1 pupils. Results of the evaluation revealed that they belong to the frustration and instructional levels in the literal skill; mostly are frustration readers along interpretative and evaluative skills; but are independent readers along applied skills; hence, they have low level of reading comprehension. Based on the result of the study, three big books as MTB-MLE instructional materials in Bicol were produced to develop or enhance Grade 1 pupils’ reading comprehension. Teaching guides were likewise developed.

  17. Sorption heat storage for long-term low-temperature applications: A review on the advancements at material and prototype scale

    NARCIS (Netherlands)

    Scapino, L.; Zondag, H.A.; Van Bael, J.; Diriken, J.; Rindt, C.C.M.

    2017-01-01

    Sorption heat storage has the potential to store large amounts of thermal energy from renewables and other distributed energy sources. This article provides an overview on the recent advancements on long-term sorption heat storage at material- and prototype- scales. The focus is on applications

  18. Animating Instructional Materials in Computer Education: An Approach to Designing and Teaching Concepts in Data Structures Using LATEX

    Directory of Open Access Journals (Sweden)

    Damilola Osikoya

    2012-08-01

    Full Text Available Animation gives a different perception on what is being visually presented. Research has shown that students are likely to understand what is being taught from the combination of animation and text than just with text. Students easily understand scientific concepts in narrative and animated forms. Data structure is a way of storing and arranging data. The efficacy of searching these stored data is very important, so is it vital that they are stored with the right algorithm. This paper presents animations designed to support teaching in computer education. Our main focus is to present controlled animated instructional materials in teaching topics in data structures. We have created three scientifically animated instructional materials in data structures consisting of the Stacks, Queues and Trees. These scientific spheres have been chosen to demonstrate the basic ideas of this work, because of its simplicity in representing the animations. We hope to develop reasonable sets of instructional material of different subject areas that will be stored in a database repository. These are intended to be delivered to students through an e-learning website and/or Mobile phones to support them with additional learning opportunities.

  19. Making things explicit using instructional materials: a case study of a Singapore teacher's practice

    Science.gov (United States)

    Leong, Yew Hoong; Cheng, Lu Pien; Toh, Wei Yeng Karen; Kaur, Berinderjeet; Toh, Tin Lam

    2018-04-01

    The phrase `make it explicit' is a common advice given to teachers. It is, however, not clear to us what this actually means when translated into classroom practice. Our review found that we are not alone: "explicit" is used in different ways in the education literature. This paper explores, through a case study of a teacher who stated "making things explicit" as an ostensible goal of his instructional practice, how the explicitation is realised in teaching mathematics. In particular, we examine how he used the instructional materials that he crafted to fulfil his goal of explicitation. We were able to uncover three strategies he used: explicit-from, explicit-within, and explicit-to.

  20. The effectiveness of three sets of school-based instructional materials and community training on the acquisition and generalization of community laundry skills by students with severe handicaps.

    Science.gov (United States)

    Morrow, S A; Bates, P E

    1987-01-01

    This study examined the effectiveness of three sets of school-based instructional materials and community training on acquisition and generalization of a community laundry skill by nine students with severe handicaps. School-based instruction involved artificial materials (pictures), simulated materials (cardboard replica of a community washing machine), and natural materials (modified home model washing machine). Generalization assessments were conducted at two different community laundromats, on two machines represented fully by the school-based instructional materials and two machines not represented fully by these materials. After three phases of school-based instruction, the students were provided ten community training trials in one laundromat setting and a final assessment was conducted in both the trained and untrained community settings. A multiple probe design across students was used to evaluate the effectiveness of the three types of school instruction and community training. After systematic training, most of the students increased their laundry performance with all three sets of school-based materials; however, generalization of these acquired skills was limited in the two community settings. Direct training in one of the community settings resulted in more efficient acquisition of the laundry skills and enhanced generalization to the untrained laundromat setting for most of the students. Results of this study are discussed in regard to the issue of school versus community-based instruction and recommendations are made for future research in this area.

  1. A Method to Represent Heterogeneous Materials for Rapid Prototyping: The Matryoshka Approach

    Science.gov (United States)

    Lei, Shuangyan; Frank, Matthew C.; Anderson, Donald D.; Brown, Thomas D.

    2015-01-01

    Purpose The purpose of this paper is to present a new method for representing heterogeneous materials using nested STL shells, based, in particular, on the density distributions of human bones. Design/methodology/approach Nested STL shells, called Matryoshka models, are described, based on their namesake Russian nesting dolls. In this approach, polygonal models, such as STL shells, are “stacked” inside one another to represent different material regions. The Matryoshka model addresses the challenge of representing different densities and different types of bone when reverse engineering from medical images. The Matryoshka model is generated via an iterative process of thresholding the Hounsfield Unit (HU) data using computed tomography (CT), thereby delineating regions of progressively increasing bone density. These nested shells can represent regions starting with the medullary (bone marrow) canal, up through and including the outer surface of the bone. Findings The Matryoshka approach introduced can be used to generate accurate models of heterogeneous materials in an automated fashion, avoiding the challenge of hand-creating an assembly model for input to multi-material additive or subtractive manufacturing. Originality/Value This paper presents a new method for describing heterogeneous materials: in this case, the density distribution in a human bone. The authors show how the Matryoshka model can be used to plan harvesting locations for creating custom rapid allograft bone implants from donor bone. An implementation of a proposed harvesting method is demonstrated, followed by a case study using subtractive rapid prototyping to harvest a bone implant from a human tibia surrogate. PMID:26120277

  2. Development and Acceptability of the Simplified Text with Workbook in Differential Equations as an Instructional Material for Engineering

    Directory of Open Access Journals (Sweden)

    Harold Jan R. Terano, ECE, MET

    2015-11-01

    Full Text Available – Instructional material is a very important tool in the teaching-learning process in a classroom situation. This is in a form of textbooks, reference texts, the chalk and blackboard, computer aided presentations and other materials that are important and useful during discussions and teachings. This study focused on the development and evaluation of an instructional material in Differential Equations for engineering programs. The simplified text with workbook in differential equations for engineering was developed for the purpose of giving the students quality material for their learning processes. The developed material was based in accordance with the minimum requirements of the Philippine Commission on Higher Education (CHED for engineering programs in the course Differential Equations. The acceptability of the material was evaluated in terms of its contents and structure and format. It was evaluated by two categories of evaluators namely, engineering professors and engineering students. The average weighted means are 4.85 in terms of the contents and 4.83 in terms of the structure and format. Based on these results, the researcher found out that the developed material is highly acceptable for use in engineering programs and responsive of the high requirement for engineering curriculum.

  3. The Respiratory System. Instructional Materials in Anatomy and Physiology for Pennsylvania Health Occupations Programs.

    Science.gov (United States)

    National Evaluation Systems, Inc., Amherst, MA.

    This instructional modular unit with instructor's guide provides materials on aspects of one of the major systems of the human body--the respiratory system. Its purpose is to introduce the student to the structures and functions of the human respiratory system--and the interrelationships of the two--and to famlliarize the student with some of the…

  4. [Rapid prototyping: a very promising method].

    Science.gov (United States)

    Haverman, T M; Karagozoglu, K H; Prins, H-J; Schulten, E A J M; Forouzanfar, T

    2013-03-01

    Rapid prototyping is a method which makes it possible to produce a three-dimensional model based on two-dimensional imaging. Various rapid prototyping methods are available for modelling, such as stereolithography, selective laser sintering, direct laser metal sintering, two-photon polymerization, laminated object manufacturing, three-dimensional printing, three-dimensional plotting, polyjet inkjet technology,fused deposition modelling, vacuum casting and milling. The various methods currently being used in the biomedical sector differ in production, materials and properties of the three-dimensional model which is produced. Rapid prototyping is mainly usedforpreoperative planning, simulation, education, and research into and development of bioengineering possibilities.

  5. Intelligent Instructional Systems in Military Training.

    Science.gov (United States)

    Fletcher, J.D.; Zdybel, Frank

    Intelligent instructional systems can be distinguished from more conventional approaches by the automation of instructional interaction and choice of strategy. This approach promises to reduce the costs of instructional materials preparation and to increase the adaptability and individualization of the instruction delivered. Tutorial simulation…

  6. A prototype knowledge-based system for material selection of ceramic matrix composites of automotive engine components

    Energy Technology Data Exchange (ETDEWEB)

    Sapuan, S.M.; Jacob, M.S.D.; Mustapha, F.; Ismail, N

    2002-12-15

    A prototype knowledge based system (KBS) for material selection of ceramic matrix composites (CMC) for engine components such as piston, connecting rod and piston ring is proposed in this paper. The main aim of this research work is to select the most suitable material for the automotive engine components. The selection criteria are based upon the pre-defined constraint value. The constraint values are mechanical, physical properties and manufacturing techniques. The constraint values are the safety values for the product design. The constraint values are selected from the product design specification. The product design specification values are selected from the past design calculation and some values are calculated by the help of past design data. The knowledge-based system consists of several modules such as knowledge acquisition module, inference module and user interface module. The domains of the knowledge-based system are defined as objects and linked together by hierarchical graph. The system is capable of selecting the most suitable materials and ranks the materials with respect to their properties. The design engineers can choose the required materials related to the materials property.

  7. Rapid prototyping using robot welding : process description

    OpenAIRE

    Ribeiro, António Fernando; Norrish, John

    1997-01-01

    Rapid Prototyping is a relatively recent technique to produce component prototypes for industry in a much shorter period of time, since the time to market a product is essential to its success. A new Rapid Prototyping process which uses metal as the raw material had been under development at Cranfield University in the last few years. The process uses a Gas Metal Arc fusion welding robot which deposits successive layers of metal in such way that it forms a 3D solid component. Firstly, a CAD s...

  8. Paper Prototyping: The Surplus Merit of a Multi-Method Approach

    Directory of Open Access Journals (Sweden)

    Stephanie Bettina Linek

    2015-07-01

    Full Text Available This article describes a multi-method approach for usability testing. The approach combines paper prototyping and think-aloud with two supplemental methods: advanced scribbling and a handicraft task. The method of advanced scribbling instructs the participants to use different colors for marking important, unnecessary and confusing elements in a paper prototype. In the handicraft task the participants have to tinker a paper prototype of their wish version. Both methods deliver additional information on the needs and expectations of the potential users and provide helpful indicators for clarifying complex or contradictory findings. The multi-method approach and its surplus benefit are illustrated by a pilot study on the redesign of the homepage of a library 2.0. The findings provide positive evidence for the applicability of the advanced scribbling and the handicraft task as well as for the surplus merit of the multi-method approach. The article closes with a discussion and outlook. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs150379

  9. Wood as Energy--Production and Marketing. Instructional Materials Developed for Iowa Teachers of Vocational Agriculture.

    Science.gov (United States)

    Iowa State Univ. of Science and Technology, Ames. Dept. of Agricultural Education.

    Instructional materials are provided for a unit dealing with production and marketing of wood as an energy source. Unit objectives and a list of visual masters appear first. Content is arranged by six topics: introduction, pre-cutting activities (planning a fuelwood cutting, marketing, chain saw safety), cutting activities, post-cutting…

  10. Bilingual Instructional Materials Dissemination Project. Report I: A Follow-Up Survey of SEDL Product Adopters.

    Science.gov (United States)

    Butler, Jacqueline; McGinty, John

    The Southwest Evaluation and Research Division conducted a survey of 165 purchasers of bilingual instructional materials produced by SEDL to determine which information channels predominate in the curriculum adoption-decision process. The findings of this survey may be useful in the selection of the most efficient ways to communicate information…

  11. A Set of English Instructional Materials Using Task-Based Learning for News Production Management Study Program in STMM “MMMTC” Yogyakarta

    Directory of Open Access Journals (Sweden)

    Geovanna Gistha Wicita

    2016-12-01

    Full Text Available The News Production Management Study Program (NPMSP in STMM “MMTC” Yogyakarta is a study program that has an English subject in the third semester. Due to the lack of time and materials for the students, English, which they will use a lot in journalism, becomes their barrier in learning. Therefore, this research attempted to develop a set of English instructional materials using task-based learning for the third semester students of the NPMSP STMM “MMTC” Yogyakarta. This research aimed to answer how the materials are developed and what the materials look like. To gather the information, the researcher adopted Borg & Gall’s (1986 Research and Development (R&D method which was combined with Kemp’s instructional design model (1977 covering eight flexible steps. Due to time and financial constraints, only five steps of R&D were conducted in designing the materials. To gather the information, the researcher conducted some interviews. After designing the materials, the interview was conducted. The interview results showed that the designed materials were good, appropriate, and applicable. Nine suggestions were obtained to revise the materials which covered the level of difficulty of the text, the content of the exercises, the overview of the learning materials, teaching media, lesson plans, instructions, layout, and material implementation. The materials consist of six units. Each unit contains five sessions, namely “What’s Up?”, “Entering the Newsroom”, “Journalists’ Project”, “Entering the News Editor Room”, and “Lesson Learned”.   DOI: https://doi.org/10.24071/llt.2015.180107

  12. Phase Change Materials (PCMs for energy storage in architecture. Use with the Magic Box prototype

    Directory of Open Access Journals (Sweden)

    Bedoya Frutos, C.

    2008-09-01

    Full Text Available The article shows an energy-accumulation system in change of phase materials, designed for a prototype dwelling used for building two bioclimatic and self-sufficient buildings. These bulidings have been built in Madrid, Washington and Beijing. The characteristics of these materials, the construction systems into which these materials were incorporated, its comparative valuation with sensitive accumulation systems, and the results of the building monitorization are included.El artículo muestra un sistema de acumulación de energía en Materiales de Cambio de Fase diseñado para un prototipo de vivienda con el que se han construido dos edificios bioclimáticos y autosuficientes. Estos edificios se han realizado en Madrid, Washington y Pekín. Se incluyen las características de estos materiales, de los sistemas constructivos donde se integraron, su valoración comparativa con los sistemas de acumulación sensibles y los resultados de la monitorización del edificio.

  13. PENGARUH POSISI ORIENTASI OBJEK PADA PROSES RAPID PROTOTYPING 3D PRINTING TERHADAP KEKUATAN TARIK MATERIAL POLYMER

    Directory of Open Access Journals (Sweden)

    Lubis Sobron

    2016-12-01

    Full Text Available Pembuatan prototipe pada industri manufaktur berkembang dengan pesat, berawal dari pembuatan secara konvensional, kemudian dilakukan dengan menggunakan mesin-mesin perkakas, dan berkembang dengan pemanfaatan komputer sebagai alat kontrol pada mesin tersebut sehingga dikenal dengan istilah CNC (computer numerically control. Pada awalnya, pembuatan prototipe dilakukan menggunakan mesin perkakas yang membentuk kontur permukaan dengan melakukan pemotongan pada  benda kerja, tentunya dalam hal ini terdapat bahan tersisa yang dikenal dengan chip. Dewasa ini perkembangan dalam pembuatan prototipe maju dengan pesat yang dikenal dengan pembuatan prototipe cepat (rapid prorotyping. Keunggulan dari rapid prototyping dalam bidang manufaktur adalah kemudahannya dalam menghasilkan suatu produk yang kompleks dengan tepat dan efisien. Proses rapid prototyping mampu merealisasikan hasil permodelan 3D software dalam bentuk nyata tanpa intervensi apapun. Dalam penelitian ini, dikaji tentang pengaruh penentuan posisi orientasi secara vertical dan horizontal terhadap kekuatan Tarik material polymer yang digunakan. Penelitian dilakukan dengan dengan menggunakan perangkat rapid prototyping tipe fused deposition modeling yakni 3D printing. Bahan filament yang digunakan jenis polymer PLA dan ABS. Proses printing dilakukan terhadap bentuk objek uji Tarik ASTM D638. Proses 3D printing dilakukan dengan memvariasikan posisi orientasi objek secara vertikal dan horizontal. Spesimen yang dihasilkan selanjutnya dilakukan uji tarik. Berdasarkan hasil pengujian yang dilakukan dapat diketahui bahwa penentuan orientasi posisi objek spesimen memberi pengaruh terhadap tegangan tarik spesimen.

  14. Design and Prototyping Flow of Flexible and Efficient NISC-Based Architectures for MIMO Turbo Equalization and Demapping

    Directory of Open Access Journals (Sweden)

    Mostafa Rizk

    2016-08-01

    Full Text Available In the domain of digital wireless communication, flexible design implementations are increasingly explored for different applications in order to cope with diverse system configurations imposed by the emerging wireless communication standards. In fact, shrinking the design time to meet market pressure, on the one hand, and adding the emerging flexibility requirement and, hence, increasing system complexity, on the other hand, require a productive design approach that also ensures final design quality. The no instruction set computer (NISC approach fulfills these design requirements by eliminating the instruction set overhead. The approach offers static scheduling of the datapath, automated register transfer language (RTLsynthesis and allows the designer to have direct control of hardware resources. This paper presents a complete NISC-based design and prototype flow, from architecture specification till FPGA implementation. The proposed design and prototype flow is illustrated through two case studies of flexible implementations, which are dedicated to low-complexity MIMO turbo-equalizer and a universal turbo-demapper. Moreover, the flexibility of the proposed prototypes allows supporting all communication modes defined in the emerging wireless communication standards, such LTE, LTE-Advanced, WiMAX, WiFi and DVB-RCS. For each prototype, its functionality is evaluated, and the resultant performance is verified for all system configurations.

  15. Teachers' Improvisation of Instructional Materials for Nigerian Home Economics Curriculum Delivery: Challenges and Strategies

    Science.gov (United States)

    Olibie, Eyiuche Ifeoma; Nwabunwanne, Chinyere; Ezenwanne, Dorothy Nkem

    2013-01-01

    This study was designed to ascertain the challenges of improvising instructional materials by Home Economics teachers at the Upper Basic education level in Nigeria, and as a result identify strategies for enhancing improvisation. The study used survey research design based on two research questions. The sample was four hundred and thirty-one Home…

  16. First results on material identification and imaging with a large-volume muon tomography prototype

    Energy Technology Data Exchange (ETDEWEB)

    Pesente, S. [INFN Sezione di Padova, via Marzolo 8, 35131 Padova (Italy); Vanini, S. [University of Padova and INFN Sezione di Padova, via Marzolo 8, 35131 Padova (Italy)], E-mail: sara.vanini@pd.infn.it; Benettoni, M. [INFN Sezione di Padova, via Marzolo 8, 35131 Padova (Italy); Bonomi, G. [University of Brescia, via Branze 38, 25123 Brescia and INFN Sezione di Pavia, via Bassi 6, 27100 Pavia (Italy); Calvini, P. [University of Genova and INFN Sezione di Genova, via Dodecaneso 33, 16146 Genova (Italy); Checchia, P.; Conti, E.; Gonella, F.; Nebbia, G. [INFN Sezione di Padova, via Marzolo 8, 35131 Padova (Italy); Squarcia, S. [University of Genova and INFN Sezione di Genova, via Dodecaneso 33, 16146 Genova (Italy); Viesti, G. [University of Padova and INFN Sezione di Padova, via Marzolo 8, 35131 Padova (Italy); Zenoni, A. [University of Brescia, via Branze 38, 25123 Brescia and INFN Sezione di Pavia, via Bassi 6, 27100 Pavia (Italy); Zumerle, G. [University of Padova and INFN Sezione di Padova, via Marzolo 8, 35131 Padova (Italy)

    2009-06-11

    The muon tomography technique, based on the Multiple Coulomb Scattering of cosmic ray muons, has been proposed recently as a tool to perform non-destructive assays of large-volume objects without any radiation hazard. In this paper we discuss experimental results obtained with a scanning system prototype, assembled using two large-area CMS Muon Barrel drift chambers. The capability of the apparatus to produce 3D images of objects and to classify them according to their density is presented. We show that the absorption of low-momentum muons in the scanned objects produces an underestimate of their scattering density, making the discrimination of materials heavier than lead more difficult.

  17. First results on material identification and imaging with a large-volume muon tomography prototype

    Energy Technology Data Exchange (ETDEWEB)

    Viesti, G. [Dipartimento di Fisica, Universita di Padova, via Marzolo 8, I-35131 Padova (Italy); Pesente, S.; Benettoni, M.; Checchia, P.; Conti, E.; Gonella, F.; Nebbia, G. [INFN, Sez. di Padova, Via Marzolo 8, I-35131 Padova (Italy); Vanini, S.; Viesti, G.; Zumerle, G. [Dip. di Fisica G. Galilei, Universita di Padova, I-35131 Padova (Italy); INFN, Sez. di Padova, Via Marzolo 8, I-35131 Padova (Italy); Bonomi, G.; Zenoni, A. [Universita di Brescia, I-25133 Brescia (Italy); INFN, Sez. di Pavia, Via Valotti 9, I-25133 Brescia (Italy); Calvini, P.; Squarcia, S. [Dip. di Fisica, Universita di Genova, Genova (Italy); INFN, Sez. di Genova, Via Dodecaneso 33, I-16146 Genova (Italy)

    2009-07-01

    The muon tomography technique, based on the multiple Coulomb scattering of cosmic ray muons, has been proposed recently as a tool to perform non-destructive assays of large volume objects without any radiation hazard. In this paper we present the experimental results obtained with a scanning system prototype, assembled using two large area CMS Muon Barrel drift chambers. The imaging capability of the apparatus is shown, and the possibility to discriminate among different materials is discussed in a specific case of detecting lead objects inside a metal matrix. This specific case is dictated by a need in safely handling scrap metal cargoes in the steel industry. (authors)

  18. Prototype Morphing Fan Nozzle Demonstrated

    Science.gov (United States)

    Lee, Ho-Jun; Song, Gang-Bing

    2004-01-01

    Ongoing research in NASA Glenn Research Center's Structural Mechanics and Dynamics Branch to develop smart materials technologies for aeropropulsion structural components has resulted in the design of the prototype morphing fan nozzle shown in the photograph. This prototype exploits the potential of smart materials to significantly improve the performance of existing aircraft engines by introducing new inherent capabilities for shape control, vibration damping, noise reduction, health monitoring, and flow manipulation. The novel design employs two different smart materials, a shape-memory alloy and magnetorheological fluids, to reduce the nozzle area by up to 30 percent. The prototype of the variable-area fan nozzle implements an overlapping spring leaf assembly to simplify the initial design and to provide ease of structural control. A single bundle of shape memory alloy wire actuators is used to reduce the nozzle geometry. The nozzle is subsequently held in the reduced-area configuration by using magnetorheological fluid brakes. This prototype uses the inherent advantages of shape memory alloys in providing large induced strains and of magnetorheological fluids in generating large resistive forces. In addition, the spring leaf design also functions as a return spring, once the magnetorheological fluid brakes are released, to help force the shape memory alloy wires to return to their original position. A computerized real-time control system uses the derivative-gain and proportional-gain algorithms to operate the system. This design represents a novel approach to the active control of high-bypass-ratio turbofan engines. Researchers have estimated that such engines will reduce thrust specific fuel consumption by 9 percent over that of fixed-geometry fan nozzles. This research was conducted under a cooperative agreement (NCC3-839) at the University of Akron.

  19. Selection of hardfacing material for components of the Indian Prototype Fast Breeder Reactor

    International Nuclear Information System (INIS)

    Bhaduri, A.K.; Indira, R.; Albert, S.K.; Rao, B.P.S.; Jain, S.C.; Asokkumar, S.

    2004-01-01

    Nickel-base hardfacing alloys have been chosen to replace cobalt-base alloys as hardfacing material for components of the Indian Prototype Fast Breeder Reactor, for minimising the dose rate to personnel during maintenance and decommissioning, and to reduce the shielding thickness required for component handling. Induced activity, dose rate and shielding computations showed that replacing cobalt-base alloys with nickel-base alloys for hardfacing of components would result in a marked reduction in both the dose rate from the components and the thickness of lead handling flasks. Long-term ageing studies on the nickel-base hardface deposits on austenitic stainless steel showed that the hardface deposit would retain adequate hardness at the end of the components' design service-life of 40 years of exposure at 823 K

  20. Prototypical Rod Consolidation Demonstration Project

    International Nuclear Information System (INIS)

    1993-05-01

    The objective of Phase III of the Prototypical Rod Consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod Consolidation System as described in the NUS Phase II Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase III effort the system was tested on a component, subsystem, and system level. Volume IV provides the Operating and Maintenance Manual for the Prototypical Rod Consolidation System that was installed at the Cold Test Facility. This document, Book 1 of Volume IV, discusses: Process overview functional descriptions; Control system descriptions; Support system descriptions; Maintenance system descriptions; and Process equipment descriptions

  1. Prototypical Rod Consolidation Demonstration Project

    International Nuclear Information System (INIS)

    1993-05-01

    The objective of Phase III of the Prototypical Rod Consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod Consolidation System as described in the NUS Phase II Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase III effort the system was tested on a component, subsystem, and system level. Volume IV provides the Operating and Maintenance Manual for the Prototypical Rod Consolidation System that was installed at the Cold Test Facility. This document, Book 4 of Volume IV, discusses: Off-normal operating and recovery procedures; Emergency response procedures; Troubleshooting procedures; and Preventive maintenance procedures

  2. TRADE instructional materials for SARA/OSHA training. Volume 2, Managers and supervisors training

    Energy Technology Data Exchange (ETDEWEB)

    1989-03-01

    This document provides instructional materials for an eight-hour training course for managers and supervisors of hazardous waste sites. It is one of three volumes of course materials TRADE is preparing to help DOE contractor training staff comply with 29 CFR 1910.120, the Occupational Health and Safety Administration (OSHA) rule that implements Title I of the Superfund Amendments and Reauthorization Act (SARA) of 1986. OSHA`s final rule for hazardous waste operators was published in the Federal Register of March 6, 1989 (54 FR 9294). Combined with the materials in Volumes I and III and with appropriate site-specific information, these materials will help DOE contractors to meet the requirements of 1910.120 (e) that ``on-site management and supervisors directly responsible for, or who supervise employees engaged in, hazardous waste operations`` receive the same initial training as that of the employees they supervise and at least eight additional hours of specialized training in managing hazardous waste operations.

  3. Digital Microdroplet Ejection Technology-Based Heterogeneous Objects Prototyping

    Science.gov (United States)

    Yang, Jiquan; Feng, Chunmei; Yang, Jianfei; Zhu, Liya; Guo, Aiqing

    2016-01-01

    An integrate fabrication framework is presented to build heterogeneous objects (HEO) using digital microdroplets injecting technology and rapid prototyping. The heterogeneous materials part design and manufacturing method in structure and material was used to change the traditional process. The net node method was used for digital modeling that can configure multimaterials in time. The relationship of material, color, and jetting nozzle was built. The main important contributions are to combine the structure, material, and visualization in one process and give the digital model for manufacture. From the given model, it is concluded that the method is effective for HEO. Using microdroplet rapid prototyping and the model given in the paper HEO could be gotten basically. The model could be used in 3D biomanufacturing. PMID:26981110

  4. Digital Microdroplet Ejection Technology-Based Heterogeneous Objects Prototyping

    Directory of Open Access Journals (Sweden)

    Na Li

    2016-01-01

    Full Text Available An integrate fabrication framework is presented to build heterogeneous objects (HEO using digital microdroplets injecting technology and rapid prototyping. The heterogeneous materials part design and manufacturing method in structure and material was used to change the traditional process. The net node method was used for digital modeling that can configure multimaterials in time. The relationship of material, color, and jetting nozzle was built. The main important contributions are to combine the structure, material, and visualization in one process and give the digital model for manufacture. From the given model, it is concluded that the method is effective for HEO. Using microdroplet rapid prototyping and the model given in the paper HEO could be gotten basically. The model could be used in 3D biomanufacturing.

  5. Digital Microdroplet Ejection Technology-Based Heterogeneous Objects Prototyping.

    Science.gov (United States)

    Li, Na; Yang, Jiquan; Feng, Chunmei; Yang, Jianfei; Zhu, Liya; Guo, Aiqing

    2016-01-01

    An integrate fabrication framework is presented to build heterogeneous objects (HEO) using digital microdroplets injecting technology and rapid prototyping. The heterogeneous materials part design and manufacturing method in structure and material was used to change the traditional process. The net node method was used for digital modeling that can configure multimaterials in time. The relationship of material, color, and jetting nozzle was built. The main important contributions are to combine the structure, material, and visualization in one process and give the digital model for manufacture. From the given model, it is concluded that the method is effective for HEO. Using microdroplet rapid prototyping and the model given in the paper HEO could be gotten basically. The model could be used in 3D biomanufacturing.

  6. The Effects of Computer Assisted Instruction Materials on Approximate Number Skills of Students with Dyscalculia

    Science.gov (United States)

    Mutlu, Yilmaz; Akgün, Levent

    2017-01-01

    The aim of this study is to examine the effects of computer assisted instruction materials on approximate number skills of students with mathematics learning difficulties. The study was carried out with pretest-posttest quasi experimental method with a single subject. The participants of the study consist of a girl and two boys who attend 3rd…

  7. Teaching about Contemporary Germany: Instructional Materials for the Social Studies Classroom. Correlation Charts, Content and Skills.

    Science.gov (United States)

    Blankenship, Glen

    This manual contains a description of each of the instructional kits for teaching about Germany offered by the Goethe Institute. Each kit contains lessons plans, handouts, worksheets, color transparencies, and other support materials. This teaching packet provides information regarding the "best fit" of each lesson in the instructional…

  8. Effectiveness of integrated science instructional material on pressure in daily life theme to improve digital age literacy of students

    Science.gov (United States)

    Asrizal; Amran, A.; Ananda, A.; Festiyed; Khairani, S.

    2018-04-01

    Integrated science learning and literacy skills are relevant issues in Indonesian’s education. However, the use of the integrated science learning and the integration of literacy in learning cannot be implemented well. An alternative solution of this problem is to develop integrated science instructional material on pressure in daily life theme by integrating digital age literacy. Purpose of research is to investigate the effectiveness of the use of integrated science instructional material on pressure in daily life theme to improve knowledge competence, attitudes competence and literacy skills of students. This research was a part of development research which has been conducted. In the product testing stage of this research and development was used before and after design of treatment for one sample group. Instruments to collect the data consist of learning outcomes test sheet, attitude observation sheet, and performance assessment sheet of students. Data analysis techniques include descriptive statistics analysis, normality test, homogeneity test, and paired comparison test. Therefore, the important result of research is the use of integrated science instructional material on pressure in daily life theme is effective in scientific approach to improve knowledge competence, attitudes competence, and digital age literacy skills of grade VIII students at 95% confidence level.

  9. Printing of Titanium implant prototype

    International Nuclear Information System (INIS)

    Wiria, Florencia Edith; Shyan, John Yong Ming; Lim, Poon Nian; Wen, Francis Goh Chung; Yeo, Jin Fei; Cao, Tong

    2010-01-01

    Dental implant plays an important role as a conduit of force and stress to flow from the tooth to the related bone. In the load sharing between an implant and its related bone, the amount of stress carried by each of them directly related to their stiffness or modulus. Hence, it is a crucial issue for the implant to have matching mechanical properties, in particular modulus, between the implant and its related bone. Titanium is a metallic material that has good biocompatibility and corrosion resistance. Whilst the modulus of the bulk material is still higher than that of bone, it is the lowest among all other commonly used metallic implant materials, such as stainless steel or cobalt alloy. Hence it is potential to further reduce the modulus of pure Titanium by engineering its processing method to obtain porous structure. In this project, porous Titanium implant prototype is fabricated using 3-dimensional printing. This technique allows the flexibility of design customization, which is beneficial for implant fabrication as tailoring of implant size and shape helps to ensure the implant would fit nicely to the patient. The fabricated Titanium prototype had a modulus of 4.8-13.2 GPa, which is in the range of natural bone modulus. The compressive strength achieved was between 167 to 455 MPa. Subsequent cell culture study indicated that the porous Titanium prototype had good biocompatibility and is suitable for bone cell attachment and proliferation.

  10. Developing Instructional Materials for Business Japanese.

    Science.gov (United States)

    Koike, Shohei

    Business Japanese should be the study of Japanese language and culture for business communication and should include values and beliefs and institutional constraints on which the Japanese act as well as business etiquette and terminology. Topics to be covered in instruction will vary depending on the role (seller, buyer, or colleague) played by…

  11. Tritium control and accountability instructions

    International Nuclear Information System (INIS)

    Wall, W.R.; Cruz, S.L.

    1985-08-01

    This instruction describes the tritium accountability procedures practiced by the Tritium Research Laboratory, at Sandia National Laboratories, Livermore. The accountability procedures are based upon the Sandia National Laboratories, Livermore, Nuclear Materials Operations Manual, SAND83-8036. The Nuclear Materials Operations Manual describes accountability techniques which are in compliance with the Department of Energy 5630 series Orders, Code of Federal Regulations, and Sandia National Laboratories Instructions

  12. Tritium control and accountability instructions

    International Nuclear Information System (INIS)

    Wall, W.R.

    1981-03-01

    This instruction describes the tritium accountability procedures practiced by the Tritium Research Laboratory, Building 968 at Sandia National Laboratories, Livermore. The accountability procedures are based upon the Sandia National Laboratories, Livermore, Nuclear Materials Operations Manual, SAND78-8018. The Nuclear Materials Operations Manual describes accountability techniques which are in compliance with the Department of Energy Manual, Code of Federal Regulations, and Sandia National Laboratories Instructions

  13. Virginia Power's computer-based interactive videodisc training: a prototype for the future

    International Nuclear Information System (INIS)

    Seigler, G.G.; Adams, R.H.

    1987-01-01

    Virginia Power has developed a system and internally produced a prototype for computer-based interactive videodisc (CBIV) training. Two programs have been developed using the CBIV instructional methodology: Fire Team Retraining and General Employee Training (practical factors). In addition, the company developed a related program for conducting a videodisc tour of their nuclear power stations using a videodisc information management system (VIMS)

  14. The Impact of Differentiated Instructional Materials on English Language Learner (ELL) Students' Comprehension of Science Laboratory Tasks

    Science.gov (United States)

    Manavathu, Marian; Zhou, George

    2012-01-01

    Through a qualitative research design, this article investigates the impacts of differentiated laboratory instructional materials on English language learners' (ELLs) laboratory task comprehension. The factors affecting ELLs' science learning experiences are further explored. Data analysis reveals a greater degree of laboratory task comprehension…

  15. Engineering design skills coverage in K-12 engineering program curriculum materials in the USA

    Science.gov (United States)

    Chabalengula, Vivien M.; Mumba, Frackson

    2017-11-01

    The current K-12 Science Education framework and Next Generation Science Standards (NGSS) in the United States emphasise the integration of engineering design in science instruction to promote scientific literacy and engineering design skills among students. As such, many engineering education programmes have developed curriculum materials that are being used in K-12 settings. However, little is known about the nature and extent to which engineering design skills outlined in NGSS are addressed in these K-12 engineering education programme curriculum materials. We analysed nine K-12 engineering education programmes for the nature and extent of engineering design skills coverage. Results show that developing possible solutions and actual designing of prototypes were the highly covered engineering design skills; specification of clear goals, criteria, and constraints received medium coverage; defining and identifying an engineering problem; optimising the design solution; and demonstrating how a prototype works, and making iterations to improve designs were lowly covered. These trends were similar across grade levels and across discipline-specific curriculum materials. These results have implications on engineering design-integrated science teaching and learning in K-12 settings.

  16. Design and construction of a prototype to obtain TeO2

    International Nuclear Information System (INIS)

    Roque H, I.

    1997-01-01

    At the National Institute of Nuclear Research is developed the process to produce the radioisotope Iodine 131 which is employed in medicine with therapeutical purposes. The raw material to produce iodine 131 is tellurium dioxide (TeO 2 ). TeO 2 is intended to be produced from a prototype being this aim of this thesis named D esign and construction of a prototype to obtain TeO 2 . The TeO 2 obtained must have specific physicochemical characteristics, being necessary an special design of a prototype which will guarantee the quality of tellurium dioxide obtention. Design and building the final prototype project, was developed in to three stages. At the first stage, the TeO 2 was obtained at the laboratory, this allows to know the basic reaction characteristics. The second stage purpose, was to work with an former prototype which allowed to produce 100 g of tellurium dioxide. In the last stage a depurated chemical process parameters was made and the prototype was refined in regard to its mechanical design, giving us as result the final prototype. With this final prototype, the production reaches 2 Kg/week of tellurium dioxide with the best physicochemical properties which is to be employed as raw material in order to produce iodine 131. (Author)

  17. Evaluation of instructional material while in use: Welcome to Brazil, Level 1

    Directory of Open Access Journals (Sweden)

    Maria Angela Masin

    2014-04-01

    Full Text Available The aim of this paper is to evaluate the use of the instructional material Welcome to Brazil - Level 1 (Fenton and McLarty, 2011 in a technological course in Tourism Management in the city of São Paulo. The textbook content was evaluated according to Ramos (2009 and a questionnaire was used to collect the students’ impressions.  It was concluded that the textbook needs to be complemented for an effective result with the students. The theoretical foundation is based on Cunningsworth (1984, Hutchinson and Waters (1987, Dudley-Evans and St. John (1998, Tomlinson (1998, 2001, Ramos (2009.

  18. Architectures of prototypes and architectural prototyping

    DEFF Research Database (Denmark)

    Hansen, Klaus Marius; Christensen, Michael; Sandvad, Elmer

    1998-01-01

    together as a team, but developed a prototype that more than fulfilled the expectations of the shipping company. The prototype should: - complete the first major phase within 10 weeks, - be highly vertical illustrating future work practice, - continuously live up to new requirements from prototyping......This paper reports from experience obtained through development of a prototype of a global customer service system in a project involving a large shipping company and a university research group. The research group had no previous knowledge of the complex business of shipping and had never worked...... sessions with users, - evolve over a long period of time to contain more functionality - allow for 6-7 developers working intensively in parallel. Explicit focus on the software architecture and letting the architecture evolve with the prototype played a major role in resolving these conflicting...

  19. Collaborative Prototyping

    DEFF Research Database (Denmark)

    Bogers, Marcel; Horst, Willem

    2014-01-01

    of the prototyping process, the actual prototype was used as a tool for communication or development, thus serving as a platform for the cross-fertilization of knowledge. In this way, collaborative prototyping leads to a better balance between functionality and usability; it translates usability problems into design......This paper presents an inductive study that shows how collaborative prototyping across functional, hierarchical, and organizational boundaries can improve the overall prototyping process. Our combined action research and case study approach provides new insights into how collaborative prototyping...... can provide a platform for prototype-driven problem solving in early new product development (NPD). Our findings have important implications for how to facilitate multistakeholder collaboration in prototyping and problem solving, and more generally for how to organize collaborative and open innovation...

  20. Pre-Service Teachers' Problems of Improvisation of Instructional Materials in Social Studies in Ekiti State University

    Science.gov (United States)

    Abdu-Raheem, B. O.; Oluwagbohunmi, M. F.

    2015-01-01

    This study examined problems of improvisation of instructional materials in Social Studies by pre-service teachers in Ekiti State University. The population for the study comprised all Social Studies pre-service teachers in the Faculty of Education. The sample consisted of 90 Social Studies pre-service teachers selected from 200, 300 and 400…

  1. Rapid prototyping and stereolithography in dentistry

    Science.gov (United States)

    Nayar, Sanjna; Bhuminathan, S.; Bhat, Wasim Manzoor

    2015-01-01

    The word rapid prototyping (RP) was first used in mechanical engineering field in the early 1980s to describe the act of producing a prototype, a unique product, the first product, or a reference model. In the past, prototypes were handmade by sculpting or casting, and their fabrication demanded a long time. Any and every prototype should undergo evaluation, correction of defects, and approval before the beginning of its mass or large scale production. Prototypes may also be used for specific or restricted purposes, in which case they are usually called a preseries model. With the development of information technology, three-dimensional models can be devised and built based on virtual prototypes. Computers can now be used to create accurately detailed projects that can be assessed from different perspectives in a process known as computer aided design (CAD). To materialize virtual objects using CAD, a computer aided manufacture (CAM) process has been developed. To transform a virtual file into a real object, CAM operates using a machine connected to a computer, similar to a printer or peripheral device. In 1987, Brix and Lambrecht used, for the first time, a prototype in health care. It was a three-dimensional model manufactured using a computer numerical control device, a type of machine that was the predecessor of RP. In 1991, human anatomy models produced with a technology called stereolithography were first used in a maxillofacial surgery clinic in Viena. PMID:26015715

  2. Rapid prototyping and stereolithography in dentistry.

    Science.gov (United States)

    Nayar, Sanjna; Bhuminathan, S; Bhat, Wasim Manzoor

    2015-04-01

    The word rapid prototyping (RP) was first used in mechanical engineering field in the early 1980s to describe the act of producing a prototype, a unique product, the first product, or a reference model. In the past, prototypes were handmade by sculpting or casting, and their fabrication demanded a long time. Any and every prototype should undergo evaluation, correction of defects, and approval before the beginning of its mass or large scale production. Prototypes may also be used for specific or restricted purposes, in which case they are usually called a preseries model. With the development of information technology, three-dimensional models can be devised and built based on virtual prototypes. Computers can now be used to create accurately detailed projects that can be assessed from different perspectives in a process known as computer aided design (CAD). To materialize virtual objects using CAD, a computer aided manufacture (CAM) process has been developed. To transform a virtual file into a real object, CAM operates using a machine connected to a computer, similar to a printer or peripheral device. In 1987, Brix and Lambrecht used, for the first time, a prototype in health care. It was a three-dimensional model manufactured using a computer numerical control device, a type of machine that was the predecessor of RP. In 1991, human anatomy models produced with a technology called stereolithography were first used in a maxillofacial surgery clinic in Viena.

  3. Rethink! prototyping transdisciplinary concepts of prototyping

    CERN Document Server

    Nagy, Emilia; Stark, Rainer

    2016-01-01

    In this book, the authors describe the findings derived from interaction and cooperation between scientific actors employing diverse practices. They reflect on distinct prototyping concepts and examine the transformation of development culture in their fusion to hybrid approaches and solutions. The products of tomorrow are going to be multifunctional, interactive systems – and already are to some degree today. Collaboration across multiple disciplines is the only way to grasp their complexity in design concepts. This underscores the importance of reconsidering the prototyping process for the development of these systems, particularly in transdisciplinary research teams. “Rethinking Prototyping – new hybrid concepts for prototyping” was a transdisciplinary project that took up this challenge. The aim of this programmatic rethinking was to come up with a general concept of prototyping by combining innovative prototyping concepts, which had been researched and developed in three sub-projects: “Hybrid P...

  4. Toward Instructional Design Principles: Inducing Faraday's Law with Contrasting Cases

    Science.gov (United States)

    Kuo, Eric; Wieman, Carl E.

    2016-01-01

    Although physics education research (PER) has improved instructional practices, there are not agreed upon principles for designing effective instructional materials. Here, we illustrate how close comparison of instructional materials could support the development of such principles. Specifically, in discussion sections of a large, introductory…

  5. Injectable scaffold materials differ in their cell instructive effects on primary human myoblasts

    DEFF Research Database (Denmark)

    Hejbøl, Eva Kildall; Sellathurai, Jeeva; Nair, Prabha Damodaran

    2017-01-01

    Scaffolds are materials used for delivery of cells for regeneration of tissues. They support three-dimensional organization and improve cell survival. For the repair of small skeletal muscles, injections of small volumes of cells are attractive, and injectable scaffolds for delivery of cells offer...... a minimally invasive technique. In this study, we examined in vitro the cell instructive effects of three types of injectable scaffolds, fibrin, alginate, and poly(lactic-co-glycolic acid)-based microparticles on primary human myoblasts. The myoblast morphology and progression in the myogenic program differed......, depending on the type of scaffold material. In alginate gel, the cells obtained a round morphology, they ceased to proliferate, and entered quiescence. In the fibrin gels, differentiation was promoted, and myotubes were observed within a few days in culture, while poly(lactic-co-glycolic acid...

  6. Physics Instruction for Radiologic Technologists

    Science.gov (United States)

    Chaney, Edward L.; And Others

    1974-01-01

    Discusses the Denver collaborative training program in radiologic technology with emphasis upon identification of core topics, preparation of quality instructional materials, and use of innovative teaching techniques, such as computer-assisted instruction and video tape presentations. Included is a 10-week course outline. (CC)

  7. Influences of Inadequate Instructional Materials and Facilities in Teaching and Learning of Electrical/Electronics Technology Education Courses

    Science.gov (United States)

    Ogbu, James E.

    2015-01-01

    This study investigated the influences of inadequate instructional materials and facilities in the teaching and learning of electrical/electronics (E/E) technology education courses. The study was guided by two research questions and two null hypotheses which were tested at 0.05 level of significance. The design employed was descriptive survey…

  8. Measuring motivational characteristics of courses: applying Keller's instructional materials motivation survey to a web-based course.

    Science.gov (United States)

    Cook, David A; Beckman, Thomas J; Thomas, Kris G; Thompson, Warren G

    2009-11-01

    The Instructional Materials Motivation Survey (IMMS) purports to assess the motivational characteristics of instructional materials or courses using the Attention, Relevance, Confidence, and Satisfaction (ARCS) model of motivation. The IMMS has received little use or study in medical education. The authors sought to evaluate the validity of IMMS scores and compare scores between standard and adaptive Web-based learning modules. During the 2005-2006 academic year, 124 internal medicine residents at the Mayo School of Graduate Medical Education (Rochester, Minnesota) were asked to complete the IMMS for two Web-based learning modules. Participants were randomly assigned to use one module that adapted to their prior knowledge of the topic, and one module using a nonadaptive design. IMMS internal structure was evaluated using Cronbach alpha and interdimension score correlations. Relations to other variables were explored through correlation with global module satisfaction and regression with knowledge scores. Of the 124 eligible participants, 79 (64%) completed the IMMS at least once. Cronbach alpha was >or=0.75 for scores from all IMMS dimensions. Interdimension score correlations ranged 0.40 to 0.80, whereas correlations between IMMS scores and global satisfaction ratings ranged 0.40 to 0.63 (Por=.07). IMMS scores were similar between module designs (on a five-point scale, differences ranged from 0.0 to 0.15, P>or=.33). These limited data generally support the validity of IMMS scores. Adaptive and standard Web-based instructional designs were similarly motivating. Cautious use and further study of the IMMS are warranted.

  9. Cockroft Walton accelerator prototype

    International Nuclear Information System (INIS)

    Hutapea, Sumihar.

    1976-01-01

    Prototype of a Cockroft Walton generator using ceramic and plastic capacitors is discussed. Compared to the previous generator, the construction and components are much more improved. Pralon is used for the high voltage insulation column and plastic is used as a dielectric material for the high voltage capacitor. Cockroft Walton generator is used as a high tension supply for an accelerator. (author)

  10. Prototyping for surgical and prosthetic treatment.

    Science.gov (United States)

    Goiato, Marcelo Coelho; Santos, Murillo Rezende; Pesqueira, Aldiéris Alves; Moreno, Amália; dos Santos, Daniela Micheline; Haddad, Marcela Filié

    2011-05-01

    Techniques of rapid prototyping were introduced in the 1980s in the field of engineering for the fabrication of a solid model based on a computed file. After its introduction in the biomedical field, several applications were raised for the fabrication of models to ease surgical planning and simulation in implantology, neurosurgery, and orthopedics, as well as for the fabrication of maxillofacial prostheses. Hence, the literature has described the evolution of rapid prototyping technique in health care, which allowed easier technique, improved surgical results, and fabrication of maxillofacial prostheses. Accordingly, a literature review on MEDLINE (PubMed) database was conducted using the keywords rapid prototyping, surgical planning, and maxillofacial prostheses and based on articles published from 1981 to 2010. After reading the titles and abstracts of the articles, 50 studies were selected owing to their correlations with the aim of the current study. Several studies show that the prototypes have been used in different dental-medical areas such as maxillofacial and craniofacial surgery; implantology; neurosurgery; orthopedics; scaffolds of ceramic, polymeric, and metallic materials; and fabrication of personalized maxillofacial prostheses. Therefore, prototyping has been an indispensable tool in several studies and helpful for surgical planning and fabrication of prostheses and implants.

  11. Reliability and Validity of Prototype Diagnosis for Adolescent Psychopathology.

    Science.gov (United States)

    Haggerty, Greg; Zodan, Jennifer; Mehra, Ashwin; Zubair, Ayyan; Ghosh, Krishnendu; Siefert, Caleb J; Sinclair, Samuel J; DeFife, Jared

    2016-04-01

    The current study investigated the interrater reliability and validity of prototype ratings of 5 common adolescent psychiatric disorders: attention-deficit/hyperactivity disorder, conduct disorder, major depressive disorder, generalized anxiety disorder, and posttraumatic stress disorder. One hundred fifty-seven adolescent inpatient participants consented to participate in this study. We compared ratings from 2 inpatient clinicians, blinded to each other's ratings and patient measures, after their separate initial diagnostic interview to assess interrater reliability. Prototype ratings completed by clinicians after their initial diagnostic interview with adolescent inpatients and outpatients were compared with patient-reported behavior problems and parents' report of their child's behavioral problems. Prototype ratings demonstrated good interrater reliability. Clinicians' prototype ratings showed predicted relationships with patient-reported behavior problems and parent-reported behavior problems. Prototype matching seems to be a possible alternative for psychiatric diagnosis. Prototype ratings showed good interrater reliability based on clinicians unique experiences with the patient (as opposed to video-/audio-recorded material) with no training.

  12. Availability of Instructional Materials at the Basic Education Level in Enugu Educational Zone of Enugu State, Nigeria

    Science.gov (United States)

    Chukwu, Leo C.; Eze, Thecla A. Y.; Agada, Fidelia Chinyelugo

    2016-01-01

    The study examined the availability of instructional materials at the basic education level in Enugu Education Zone of Enugu State, Nigeria. One research question and one hypothesis guided the study. The research question was answered using mean and grand mean ratings, while the hypothesis was tested using t-test statistics at 0.05 level of…

  13. The Digestive System [and] Instructor's Guide. Instructional Materials in Anatomy and Physiology for Pennsylvania Health Occupations Programs.

    Science.gov (United States)

    National Evaluation Systems, Inc., Amherst, MA.

    This instructional modular unit wlth instructor's guide provides materials on important aspects of one of the major systems of the human body--the digestive system. Its purpose is to introduce the student to the structures and functions of the human digestive system--and the interrelationships of the two--and to familiarize the student with some…

  14. Development of rapid, continuous calibration techniques and implementation as a prototype system for civil engineering materials evaluation

    International Nuclear Information System (INIS)

    Scott, M. L.; Gagarin, N.; Mekemson, J. R.; Chintakunta, S. R.

    2011-01-01

    Until recently, civil engineering material calibration data could only be obtained from material sample cores or via time consuming, stationary calibration measurements in a limited number of locations. Calibration data are used to determine material propagation velocities of electromagnetic waves in test materials for use in layer thickness measurements and subsurface imaging. Limitations these calibration methods impose have been a significant impediment to broader use of nondestructive evaluation methods such as ground-penetrating radar (GPR). In 2006, a new rapid, continuous calibration approach was designed using simulation software to address these measurement limitations during a Federal Highway Administration (FHWA) research and development effort. This continuous calibration method combines a digitally-synthesized step-frequency (SF)-GPR array and a data collection protocol sequence for the common midpoint (CMP) method. Modeling and laboratory test results for various data collection protocols and materials are presented in this paper. The continuous-CMP concept was finally implemented for FHWA in a prototype demonstration system called the Advanced Pavement Evaluation (APE) system in 2009. Data from the continuous-CMP protocol is processed using a semblance/coherency analysis to determine material propagation velocities. Continuously calibrated pavement thicknesses measured with the APE system in 2009 are presented. This method is efficient, accurate, and cost-effective.

  15. Prototype to measure bracket debonding force in vivo

    Directory of Open Access Journals (Sweden)

    Jéssika Lagni Tonus

    Full Text Available ABSTRACT Introduction: Material biodegradation that occurs in the mouth may interfere in the bonding strength between the bracket and the enamel, causing lower bond strength values in vivo, in comparison with in vitro studies. Objective: To develop a prototype to measure bracket debonding force in vivo and to evaluate, in vitro, the bond strength obtained with the prototype. Methods: A original plier (3M Unitek was modified by adding one strain gauge directly connected to its claw. An electronic circuit performed the reading of the strain gauge, and the software installed in a computer recorded the values of the bracket debonding force, in kgf. Orthodontic brackets were bonded to the facial surface of 30 bovine incisors with adhesive materials. In Group 1 (n = 15, debonding was carried out with the prototype, while tensile bond strength testing was performed in Group 2 (n = 15. A universal testing machine was used for the second group. The adhesive remnant index (ARI was recorded. Results: According to Student’s t test (α = 0.05, Group 1 (2.96 MPa and Group 2 (3.08 MPa were not significantly different. ARI score of 3 was predominant in the two groups. Conclusion: The prototype proved to be reliable for obtaining in vivo bond strength values for orthodontic brackets.

  16. Prototype to measure bracket debonding force in vivo

    Science.gov (United States)

    Tonus, Jéssika Lagni; Manfroi, Fernanda Borguetti; Borges, Gilberto Antonio; Grigolo, Eduardo Correa; Helegda, Sérgio; Spohr, Ana Maria

    2017-01-01

    ABSTRACT Introduction: Material biodegradation that occurs in the mouth may interfere in the bonding strength between the bracket and the enamel, causing lower bond strength values in vivo, in comparison with in vitro studies. Objective: To develop a prototype to measure bracket debonding force in vivo and to evaluate, in vitro, the bond strength obtained with the prototype. Methods: A original plier (3M Unitek) was modified by adding one strain gauge directly connected to its claw. An electronic circuit performed the reading of the strain gauge, and the software installed in a computer recorded the values of the bracket debonding force, in kgf. Orthodontic brackets were bonded to the facial surface of 30 bovine incisors with adhesive materials. In Group 1 (n = 15), debonding was carried out with the prototype, while tensile bond strength testing was performed in Group 2 (n = 15). A universal testing machine was used for the second group. The adhesive remnant index (ARI) was recorded. Results: According to Student’s t test (α = 0.05), Group 1 (2.96 MPa) and Group 2 (3.08 MPa) were not significantly different. ARI score of 3 was predominant in the two groups. Conclusion: The prototype proved to be reliable for obtaining in vivo bond strength values for orthodontic brackets. PMID:28444011

  17. Materials and construction techniques for cryogenic wind tunnel facilities for instruction/research use

    Science.gov (United States)

    Morse, S. F.; Roper, A. T.

    1975-01-01

    The results of the cryogenic wind tunnel program conducted at NASA Langley Research Center are presented to provide a starting point for the design of an instructional/research wind tunnel facility. The advantages of the cryogenic concept are discussed, and operating envelopes for a representative facility are presented to indicate the range and mode of operation. Special attention is given to the design, construction and materials problems peculiar to cryogenic wind tunnels. The control system for operation of a cryogenic tunnel is considered, and a portion of a linearized mathematical model is developed for determining the tunnel dynamic characteristics.

  18. Impact of supplemental instruction leader on the success of supplemental instruction model

    Science.gov (United States)

    Mahabaduge, Hasitha; Haslam, Jeanne

    Supplemental instruction utilizes peer-assisted study sessions to provide review sessions on course material and an opportunity to discuss and work out problems. The impact of supplemental instruction on student performance is well researched and used in a large number of universities around the world due to its proven success. However, the impact of the student leader who plays a significant role in this model is rarely discussed in the literature. We present a case study on the impact of student leader on the success of supplemental instruction model. This case study was done for an Introductory Physics course correlating student performance and the supplemental instruction sessions they attended. Further analysis revealed that the academic performance and work ethics of the student leader has a significant impact on the success of the supplemental instruction model. Important factors to consider when selecting a student leader, the challenges and possible remedies will also be discussed.

  19. A Prototype Bucket Wheel Excavator for the Moon, Mars and Phobos

    Science.gov (United States)

    Muff, T.; Johnson, L.; King, R.; Duke, M. B.

    2004-02-01

    Excavation of surface regolith material is the first step in processes to extract volatile materials from planetary surface regolith for the production of propellant and life support consumables. Typically, concentrations of volatiles are low, so relatively large amounts of material must be excavated. A bucket wheel excavator is proposed, which has the capability of continuous excavation, which is readily adapted to granular regolith materials as found on the Moon, in drift deposits on Mars, and probably on the surface of asteroids and satellites, such as Phobos. The bucket wheel excavator is relatively simple, compared to machines such as front end loaders. It also has the advantage that excavation forces are principally horizontal rather than vertical, which minimizes the need for excavator mass and suits it to operations in reduced gravity fields. A prototype small bucket wheel excavator has been built at approximately the scale of the rovers that are carried to Mars on the Mars Exploration Rover Mission. The prototype allows the collection of data on forces exerted and power requirements for excavation and will provide data on which more efficient designs can be based. At excavation rates in the vicinity of one rover mass of material excavated per hour, tests of the prototype demonstrate that the power required is largely that needed to operate the excavator hardware and not related strongly to the amount of material excavated. This suggests that the excavation rate can be much larger for the same excavation system mass. Work on this prototype is continuing on the details of transfer of material from the bucket wheel to an internal conveyor mechanism, which testing demonstrated to be problematic in the current design.

  20. Architectural prototyping

    DEFF Research Database (Denmark)

    Bardram, Jakob Eyvind; Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2004-01-01

    A major part of software architecture design is learning how specific architectural designs balance the concerns of stakeholders. We explore the notion of "architectural prototypes", correspondingly architectural prototyping, as a means of using executable prototypes to investigate stakeholders...

  1. A multi-layered approach to product architecture modeling: Applied to technology prototypes

    DEFF Research Database (Denmark)

    Ravn, Poul Martin; Guðlaugsson, Tómas Vignir; Mortensen, Niels Henrik

    2016-01-01

    Companies that wish to include novel technology in the product portfolio may need to test and evaluate the technology with the use of prototypes to learn its benefits. Without clear knowledge of the benefits of the technology to the products in the portfolio, in the form of increased performance...... and managing technology prototypes and can be correlated with improvements in the team collaboration, communication, and development performance......., added functions, or material savings, the prototype development can be hard to manage. In this article, two contributions are made. The first adds to the vocabulary of prototyping, defining technology prototype, a prototype used for testing a novel technology in the context of an existing product...

  2. Constructing post-surgical discharge instructions through a Delphi consensus methodology.

    Science.gov (United States)

    Scott, Aaron R; Sanderson, Cody J; Rush, Augustus J; Alore, Elizabeth A; Naik, Aanand D; Berger, David H; Suliburk, James W

    2018-05-01

    Patient education materials are a crucial part of physician-patient communication. We hypothesize that available discharge instructions are difficult to read and fail to address necessary topics. Our objective is to evaluate readability and content of surgical discharge instructions using thyroidectomy to develop standardized discharge materials. Thyroidectomy discharge materials were analyzed for readability and assessed for content. Fifteen endocrine surgeons participated in a modified Delphi consensus panel to select necessary topics. Using readability best practices, we created standardized discharge instructions which included all selected topics. The panel evaluated 40 topics, selected 23, deemed 4 inappropriate, consolidated 5, and did not reach consensus on 8 topics after 4 rounds. The evaluated instructions' reading levels ranged from grade 6.5 to 13.2; none contained all consensus topics. Current post surgical thyroidectomy discharge instructions are more difficult to read than recommended by literacy standards and omit consensus warning signs of major complications. Our easy-to-read discharge instructions cover pertinent topics and may enhance patient education. Delphi methodology is useful for developing post-surgical instructions. Patient education materials need appropriate readability levels and content. We recommend the Delphi method to select content using consensus expert opinion whenever higher level data is lacking. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Case-Based Instructional Practices: A Multiple-Case Study from Torts, Marketing, and Online Instructional Design Classes

    Science.gov (United States)

    Jung, Ji yoon

    2017-01-01

    The purpose of this study is to provide a comprehensive account on case-based instructional practices. Semester-long participant observation records in torts, marketing, and online instructional design classes, instructor interviews, course syllabi and teaching materials were used to describe the within-class complexity of the practices in terms…

  4. 10 CFR 71.111 - Instructions, procedures, and drawings.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Instructions, procedures, and drawings. 71.111 Section 71... MATERIAL Quality Assurance § 71.111 Instructions, procedures, and drawings. The licensee, certificate..., procedures, or drawings of a type appropriate to the circumstances and shall require that these instructions...

  5. Rapid prototyping for biomedical engineering: current capabilities and challenges.

    Science.gov (United States)

    Lantada, Andrés Díaz; Morgado, Pilar Lafont

    2012-01-01

    A new set of manufacturing technologies has emerged in the past decades to address market requirements in a customized way and to provide support for research tasks that require prototypes. These new techniques and technologies are usually referred to as rapid prototyping and manufacturing technologies, and they allow prototypes to be produced in a wide range of materials with remarkable precision in a couple of hours. Although they have been rapidly incorporated into product development methodologies, they are still under development, and their applications in bioengineering are continuously evolving. Rapid prototyping and manufacturing technologies can be of assistance in every stage of the development process of novel biodevices, to address various problems that can arise in the devices' interactions with biological systems and the fact that the design decisions must be tested carefully. This review focuses on the main fields of application for rapid prototyping in biomedical engineering and health sciences, as well as on the most remarkable challenges and research trends.

  6. Activity Based Startup Plan for Prototype Vertical Denitration Calciner

    International Nuclear Information System (INIS)

    SUTTER, C.S.

    1999-01-01

    Testing activation on the Prototype Vertical Denitration Calciner at PFP were suspended in January 1997 due to the hold on fissile material handling in the facility. The restart of testing activities will require a review through an activity based startup process based upon Integrated Safety Management (ISM) principles to verify readiness. The Activity Based Startup Plan for the Prototype vertical Denitration Calciner has been developed for this process

  7. A Model of Research Paper Writing Instructional Materials for Academic Writing Course: "Needs & Documents Analysis and Model Design"

    Science.gov (United States)

    Ghufron, M. Ali; Saleh, Mursid; Warsono; Sofwan, Ahmad

    2016-01-01

    This study aimed at designing a model of instructional materials for Academic Writing Course focusing on research paper writing. The model was designed based on the Curriculum at the English Education Study Program, Faculty of Language and Art Education of IKIP PGRI Bojonegoro, East Java, Indonesia. This model was developed in order to improve…

  8. Mathematics Instructional Model Based on Realistic Mathematics Education to Promote Problem Solving Ability at Junior High School Padang

    OpenAIRE

    Edwin Musdi

    2016-01-01

    This research aims to develop a mathematics instructional model based realistic mathematics education (RME) to promote students' problem-solving abilities. The design research used Plomp models, which consists of preliminary phase, development or proto-typing phase and assessment phase.  At this study, only the first two phases conducted. The first phase, a preliminary investigation, carried out with a literature study to examine the theory-based instructional learning RME model, characterist...

  9. The separate and collective effects of personalization, personification, and gender on learning with multimedia chemistry instructional materials

    Science.gov (United States)

    Halkyard, Shannon

    Chemistry is a difficult subject to learn and teach for students in general. Additionally, female students are under-represented in chemistry and the physical sciences. Within chemistry, atomic and electronic structure is a key concept and several recommendations in the literature describe how this topic can be taught better. These recommendations can be employed in multimedia instructional materials designed following principles understood through the Cognitive Theory of Multimedia Learning. Additionally, these materials can expand the known use of principles like personalization (addressing the learner as "you") and test prospective design principles like personification (referring to abstract objects like atoms as "she" or "he"). The purpose of this study was to use the recommendations on teaching atomic and electronic structure along with known multimedia design principles to create multimedia chemistry learning materials that can be used to test the use of personalization and personification both separately and together. The study also investigated how learning with these materials might be different for male and female students. A sample of 329 students from private northern California high schools were given an atomic structure pre-test, watched a multimedia chemistry instructional video, and took a post-test on atomic structure. Students were randomly assigned to watch one of six versions of the instructional video. Students in the six groups were compared using ANOVA procedures and no significant differences were found. Males were compared to females for the six different treatment conditions and the most significant difference was for the treatment that combined personalization (you) and female personification (she), with a medium effect size (Cohen's d=0.65). Males and females were then compared separately across the six groups using ANOVA procedures and t-tests. A significant difference was found for female students using the treatment that combined

  10. Engine Fundamentals: Automotive Mechanics Instructional Program. Block 2.

    Science.gov (United States)

    O'Brien, Ralph D.

    The second of six instructional blocks in automotive mechanics, the lessons and supportive information in the document provide a guide for teachers in planning an instructional program in engine fundamentals at the secondary and postsecondary level. The material, as organized, is a suggested sequence of instruction within each block. Each lesson…

  11. Individualization and Modularization of Vocational Education Instructional Materials. An Annotated Bibliography of Publications and Projects. Bibliography Series No. 32.

    Science.gov (United States)

    Magisos, Joel H., Comp.; Stakelon, Anne E., Comp.

    This annotated bibliography is designed to assist applicants for research grants under part C (section 131a) of the amendments to the Vocational Education Act of 1963 by providing access to documents, journal articles, and current projects related to the individualization and modularization of vocational education instructional materials. The…

  12. Prototyping Practice

    DEFF Research Database (Denmark)

    Ramsgaard Thomsen, Mette; Tamke, Martin

    2015-01-01

    This paper examines the role of the prototyping in digital architecture. During the past decade, a new research field has emerged exploring the digital technology’s impact on the way we think, design and build our environment. In this practice the prototype, the pavilion, installation or demonstr......This paper examines the role of the prototyping in digital architecture. During the past decade, a new research field has emerged exploring the digital technology’s impact on the way we think, design and build our environment. In this practice the prototype, the pavilion, installation...

  13. APPLICATION OF ADDITIVELY MANUFACTURED POLYMER COMPOSITE PROTOTYPES IN FOUNDRY

    Directory of Open Access Journals (Sweden)

    Wiesław Kuczko

    2015-05-01

    Full Text Available The paper presents a method, developed by the authors, for manufacturing polymer composites with the matrix manufactured in a layered manner (via 3D printing – Fused Deposition Modeling out of a thermoplastic material. As an example of practical application of this method, functional prototypes are presented, which were used as elements of foundry tooling – patterns for sand molding. In case of manufacturing prototype castings or short series of products, foundries usually cooperate with modeling studios, which produce patterns by conventional, subtractive manufacturing technologies. If patterns have complex shapes, this results in high manufacturing costs and significantly longer time of tooling preparation. The method proposed by the authors allows manufacturing functional prototypes in a short time thanks to utilizing capabilities of additive manufacturing (3D printing technology. Thanks to using two types of materials simultaneously (ABS combined with chemically hardened resins, the produced prototypes are capable of carrying increased loads. Moreover, the method developed by the authors is characterized by manufacturing costs lower than in the basic technology of Fused Deposition Modeling. During the presented studies, the pattern was produced as a polymer composite and it was used to prepare a mold and a set of metal castings.

  14. Digital Microdroplet Ejection Technology-Based Heterogeneous Objects Prototyping

    OpenAIRE

    Li, Na; Yang, Jiquan; Feng, Chunmei; Yang, Jianfei; Zhu, Liya; Guo, Aiqing

    2016-01-01

    An integrate fabrication framework is presented to build heterogeneous objects (HEO) using digital microdroplets injecting technology and rapid prototyping. The heterogeneous materials part design and manufacturing method in structure and material was used to change the traditional process. The net node method was used for digital modeling that can configure multimaterials in time. The relationship of material, color, and jetting nozzle was built. The main important contributions are to combi...

  15. Learning Efficacy and Cost-Effectiveness of Print versus e-Book Instructional Material in an Introductory Financial Accounting Course

    Science.gov (United States)

    Annand, David

    2008-01-01

    This article describes the concurrent development of paper-based and e-book versions of a textbook and related instructional material used in an introductory-level financial accounting course. Break-even analysis is used to compare costs of the two media. A study conducted with 109 students is also used to evaluate the two media with respect to…

  16. Tune Up: Automotive Mechanics Instructional Program. Block 5.

    Science.gov (United States)

    O'Brien, Ralph D.

    The fifth of six instructional blocks in automotive mechanics, the lessons and supportive information in the document provide a guide for teachers in planning an instructional program in automotive tune-ups at the secondary and post secondary level. The material, as organized, is a suggested sequence of instruction within each block. Each lesson…

  17. Fuel System: Automotive Mechanics Instructional Program. Block 4.

    Science.gov (United States)

    O'Brien, Ralph D.

    The fourth of six instructional blocks in automotive mechanics, the lessons and supportive information in the document provide a guide for teachers in planning an instructional program in automotive fuel systems at the secondary and post secondary level. The material, as organized, is a suggested sequence of instruction within each block. Each…

  18. Cooling System: Automotive Mechanics Instructional Program. Block 6.

    Science.gov (United States)

    O'Brien, Ralph D.

    The last of six instructional blocks in automotive mechanics, the lessons and supportive information in the document provide a guide for teachers in planning an instructional program in the automotive cooling system at the secondary and post secondary level. The material, as organized, is a suggested sequence of instruction within each block. Each…

  19. PRODUCTION OF PROTOTYPE PARTS USING DIRECT METAL LASER SINTERING TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Josef Sedlak

    2015-08-01

    Full Text Available Unconventional methods of modern materials preparation include additive technologies which involve the sintering of powders of different chemical composition, granularity, physical, chemical and other utility properties. The technology called Rapid Prototyping, which uses different technological principles of producing components, belongs to this type of material preparation. The Rapid Prototyping technology facilities use photopolymers, thermoplastics, specially treated paper or metal powders. The advantage is the direct production of metal parts from input data and the fact that there is no need for the production of special tools (moulds, press tools, etc.. Unused powder from sintering technologies is re-used for production 98% of the time, which means that the process is economical, as well as ecological.The present paper discusses the technology of Direct Metal Laser Sintering (DMLS, which falls into the group of additive technologies of Rapid Prototyping (RP. The major objective is a detailed description of DMLS, pointing out the benefits it offers and its application in practice. The practical part describes the production and provides an economic comparison of several prototype parts that were designed for testing in the automotive industry.

  20. AN INSTRUCTIONAL DESIGN MODEL FOR BLENDED HIGHER EDUCATION

    Directory of Open Access Journals (Sweden)

    George Hack

    2016-07-01

    Full Text Available Instructional design models that are used by many higher education institutions to guide course design are insufficient for the unique opportunities of blended learning. Many established models are not practical tools for college faculty to use independently in the design of courses. Models like A.D.D.I.E., use a linear approach that can translate more easily into practical stages of course design, yet are historically rooted in the rapid prototyping of educational technologies or for designing military training and are inadequate for the complex demands of higher education, where learning outcomes are geared toward higher order thinking, scientific/clinical reasoning, and a syntheses of ideas into new knowledge. Presented here is an instructional design model that strategically incorporates the nuances of higher education, yet is practically framed to assist faculty with design challenges.

  1. Instruction manual: Fly ash stabilised sludge (FSS) as liner material; Vaegledning: Flygaskastabiliserat avloppsslam (FSA) som taetskikt

    Energy Technology Data Exchange (ETDEWEB)

    Carling, Maria; Haakansson, Karsten; Macsik, Josef; Mossakowska, Agnes; Rogbeck, Yvonne

    2007-06-15

    Several old waste sites are on the verge to be closed up during the next ten years. The function of a liner is to limit the amount of water that is infiltrated to the waste. This leads to high demand on a liner's permeability, shear strength and durability. Several pilot studies have been followed up where fly ash stabilised sewage sludge (FSS) was used as liner. The results show that FSS has low hydraulic conductivity (low permeability) and that it meets the demands put on a liner for non-hazardous wastes. Closure with FSS as liner puts special demands on the materials, the mixing action and during installation. The aim of this instruction manual is that it will work as an aid to manufacture and install liner, based on fly ash and sewage sludge, which fulfils functional demands. The manual contains a description of geotechnical and environmental demands to accomplish. This includes the following; manufacturing, storing, installation and follow up/control. This instruction manual is aimed for those who are planning closures of a landfill with FSS and need guidance to plan, carry out and control the liner construction. The manual can also be used by environmental agencies in order to control that the closure is done appropriately. Sewage sludge and fly ash from different producers can have varying properties. The quality of the used materials can change the FSS mixture's material properties and thereby also its permeability and durability. Both raw materials and mixtures should thereby be investigated according to material parameters. The mixtures dry solid content is a critical parameter as both shear strength and handling properties will be effected. In order to acquire sufficient amount of raw material storing is often required. Several aspects must then be counted on, as the properties of the raw materials can be altered. Manufacturing FSS must be done with the same material properties that have been investigated and evaluated in laboratory. Different

  2. Natural Resource Information System. Volume 2: System operating procedures and instructions

    Science.gov (United States)

    1972-01-01

    A total computer software system description is provided for the prototype Natural Resource Information System designed to store, process, and display data of maximum usefulness to land management decision making. Program modules are described, as are the computer file design, file updating methods, digitizing process, and paper tape conversion to magnetic tape. Operating instructions for the system, data output, printed output, and graphic output are also discussed.

  3. Rancang Bangun Prototype Media Pembelajaran Fisika Berbasis Micro Controller NodeMCU

    Directory of Open Access Journals (Sweden)

    Fayakun Muchlis

    2017-04-01

    Full Text Available Penelitian ini bertujuan menghasilkan prototype media pembelajaran fisika berbasis micro controller NodeMCU. Prototype media pembelajaran fisika tentang Hukum II Newton telah dikembangkan dengan mengkombinasikan sensor IR obstacle, NodeMCU, dan sketch program Arduino IDE sebagai counter waktu dan papan track, kubus berlubang, katrol, benang, dan kepingan logam sebagai perangkat pendukung. Hasil eksperimen telah memperlihatkan nilai percepatan benda pada bidang licin lebih besar daripada bidang kasar. Hasil analisis grafik hubungan percepatan vs resultan gaya eksternal menunjukkkan berbanding lurus dan grafik hubungan percepatan vs massa benda menunjukkan berbanding terbalik. Dengan demikian dapat disimpulkan media pembelajaran fisika berbasis NodeMCU mampu memvisualisasikan, menjelaskan dan membuktikan Hukum II Newton. This research is aimed to develop a prototype of physics instructional media based on micro controller. Physics learning media about Newton’s second law prototype has been developed by combining IR sensor obstacle, NodeMCU, and sketch program the Arduino IDE as counter time, and tracking, block, pulley, rope and metal strip as support device. The experimental results show that the value of acceleration of the object on a slippery plane is larger than the rough plane. The results of the analysis of the acceleration and the resultant graph shows that the external force is directly proportional and a graph showing the acceleration vs the object's mass is inversely proportional. Thus we can conclude that Physics learning media based on NodeMCU is valid in explaining and proving Newton's II.

  4. Irradiation of an uranium silicide prototype in RA-3 reactor

    International Nuclear Information System (INIS)

    Calabrese, R.; Estrik, G.; Notari, C.

    1996-01-01

    The factibility of irradiation of an uranium silicide (U 3 Si 2 ) prototype in the RA-3 reactor was studied. The standard RA-3 fuel element uses U 3 O 8 as fissible material. The enrichment of both standard and prototype is the same: 20% U 235 and also the frame geometry and number of plates is identical. The differences are in the plate dimensions and the fissile content which is higher in the prototype. The cooling conditions of the core allow the insertion of the prototype in any core position, even near the water trap, if the overall power is kept below 5Mw. Nevertheless, the recommendation was to begin irradiation near the periphery and later on move the prototype towards more central positions in order to increase the burnup rate. The prototype was effectively introduced in a peripheral position and the thermal fluxes were measured between plates with the foil activation technique. These were also evaluated with the fuel management codes and a reasonable agreement was found. (author). 5 refs., 3 figs., 3 tabs

  5. Surface quality in rapid prototype MMD process

    Directory of Open Access Journals (Sweden)

    Lisandro Vargas Henríquez

    2004-09-01

    Full Text Available This article summarises a Manufacturing Materials and Processes MSc thesis written for the Mechanical and Electrical Engineering Department. The paper shows the interaction of process, gap (deposition distance and extursion terminal velocity modelled process parameters for CEIF's (Centro de Equipos Interfacultades rapid prototype molten material deposit (MMD Titan SH-1 machine by analysing prototupes improved surface quality and resistence to tension and characterising material. The project applies experimental design criteria for orientating the selection of experimental process parameters. Acrylonitrile-buttadin-styrene (ABS had alredy been mechanically and physicochemically characterised (i.e the material used in the MMD process.

  6. Mathematics Instructional Model Based on Realistic Mathematics Education to Promote Problem Solving Ability at Junior High School Padang

    Directory of Open Access Journals (Sweden)

    Edwin Musdi

    2016-02-01

    Full Text Available This research aims to develop a mathematics instructional model based realistic mathematics education (RME to promote students' problem-solving abilities. The design research used Plomp models, which consists of preliminary phase, development or proto-typing phase and assessment phase.  At this study, only the first two phases conducted. The first phase, a preliminary investigation, carried out with a literature study to examine the theory-based instructional learning RME model, characteristics of learners, learning management descriptions by junior high school mathematics teacher and relevant research. The development phase is done by developing a draft model (an early prototype model that consists of the syntax, the social system, the principle of reaction, support systems, and the impact and effects of instructional support. Early prototype model contain a draft model, lesson plans, worksheets, and assessments. Tesssmer formative evaluation model used to revise the model. In this study only phase of one to one evaluation conducted. In the ppreliminary phase has produced a theory-based learning RME model, a description of the characteristics of learners in grade VIII Junior High School Padang and the description of teacher teaching in the classroom. The result showed that most students were still not be able to solve the non-routine problem. Teachers did not optimally facilitate students to develop problem-solving skills of students. It was recommended that the model can be applied in the classroom.

  7. Instructor Clarity and Student Motivation: Academic Performance as a Product of Students' Ability and Motivation to Process Instructional Material

    Science.gov (United States)

    Bolkan, San; Goodboy, Alan K.; Kelsey, Dawn M.

    2016-01-01

    This study tested the notion that the effect of instructor clarity on learning is conditioned upon students' motivation. We randomly assigned 128 participants to a video of a clear or an unclear lecture and asked them to report their motivation to deeply process lecture material. Results indicated that even with clear instruction, test scores were…

  8. Enhancing experience prototyping by the help of mixed-fidelity prototypes

    OpenAIRE

    Yasar, Ansar-Ul-Haque

    2007-01-01

    In this research review I undertook the problem related to the usage of a new concept known as the Mixed- Fidelity Prototype which is a mixture of its predecessors Low- and High- Fidelity Prototypes in Experience Prototyping. Experience Prototyping is a good way to explore, communicate and interact with the designs we develop like experiencing cycling on the ice, although the mood, snow conditions, bicycle type and many other factors really matter and tend to change with time. Experience Prot...

  9. Prototypical Rod Consolidation Demonstration Project

    International Nuclear Information System (INIS)

    1993-05-01

    The objective of Phase 3 of the Prototypical Rod consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod consolidation System as described in the NUS Phase 2 Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase 3 effort the system was tested on a component, subsystem, and system level. This volume 1, discusses the PRCDP Phase 3 Test Program that was conducted by the HALLIBURTON NUS Environmental Corporation under contract AC07-86ID12651 with the United States Department of Energy. This document, Volume 1, Book 8 discusses Control System SOT Tests Results and Analysis Report. This is a continuation of Book 7

  10. Prototype of an excimer laser for microprocessing

    Science.gov (United States)

    Iwanejko, Leszek; Pokora, Ludwik J.; Wolinski, Wieslaw L.

    1991-08-01

    The paper presents a brief description of a prototype of a XeC1 excimer laser for micraprocessing of materials. The planned main parameters of the laserare as follows: wavelength . . . . . . . . . . . . . . . . . . . . . . . . . 308 nm -''energyofapulse. . . . . . . . . . . . . lOOmJ -pulseduration (FWHM) . . . . . . . . . . . . . . . 2Ons repetition frequency . . . . . . . . . . . . . . 1O Hz peak power of a pulse . . . . . . . . . . . . . . . 5 MW With respect to currently carrried works with the prototype we show only preliminary results of testing of a laser head. The obtained maximum laser pulse energy exceeded 90 ml. However it should be pointed out that this value was obtained without any opt i mi z at i on of the 1 aser.

  11. Restart plan for the prototype vertical denitration calciner

    Energy Technology Data Exchange (ETDEWEB)

    SUTTER, C.S.

    1999-09-01

    Testing activities on the Prototype Vertical Denitration Calciner at PFP were suspended in January 1997 due to the hold on fissile material handling in the facility. The Restart Plan will govern the transition of the test program from the completion of the activity based startup review; through equipment checkout and surrogate material runs; to resumption of the testing program and transition to unrestricted testing.

  12. Restart plan for the prototype vertical denitration calciner

    International Nuclear Information System (INIS)

    SUTTER, C.S.

    1999-01-01

    Testing activities on the Prototype Vertical Denitration Calciner at PFP were suspended in January 1997 due to the hold on fissile material handling in the facility. The Restart Plan will govern the transition of the test program from the completion of the activity based startup review; through equipment checkout and surrogate material runs; to resumption of the testing program and transition to unrestricted testing

  13. Classroom Evaluation of a Rapid Prototyping System.

    Science.gov (United States)

    Tennyson, Stephen A.; Krueger, Thomas J.

    2001-01-01

    Introduces rapid prototyping which creates virtual models through a variety of automated material additive processes. Relates experiences using JP System 5 in freshman and sophomore engineering design graphics courses. Analyzes strengths and limitations of the JP System 5 and discusses how to use it effectively. (Contains 15 references.)…

  14. The Effects of Instruction with Visual Materials on the Development of Preservice Elementary Teachers' Knowledge and Attitude towards Global Warming

    Science.gov (United States)

    Bozdogan, Aykut Emre

    2011-01-01

    This study aimed to identify the erroneous knowledge and misconceptions of preservice elementary teachers about global warming and examine the effects of instruction with visual materials on rectifying these misconceptions and fostering a positive attitude towards the issue of global warming. Having a quasi-experimental design, the study made use…

  15. Investigating the role of implicit prototypes in the prototype willingness model.

    Science.gov (United States)

    Howell, Jennifer L; Ratliff, Kate A

    2017-06-01

    One useful theory to predict health behavior is the prototype-willingness model (PWM), which posits that people are more willing to engage in behavior to the extent that they have a positive view of the prototypical person who performs that behavior. The goal of the present research is to test whether adding an implicit measure of prototype favorability might improve explanatory power in the PWM. Two studies examined whether implicit prototype favorability uniquely predicted White women's intentions to engage in healthy sun behavior over the next 3-6 months, and their willingness to engage in risky sun behavior, should the opportunity arise. The results suggested that implicit prototype favorability, particularly implicit prototypes of those who engage in risky UV-related behaviors, uniquely predicted intentions to engage in healthy sun behavior and willingness to engage in risky sun behavior in the PWM.

  16. Software Prototyping

    Science.gov (United States)

    Del Fiol, Guilherme; Hanseler, Haley; Crouch, Barbara Insley; Cummins, Mollie R.

    2016-01-01

    Summary Background Health information exchange (HIE) between Poison Control Centers (PCCs) and Emergency Departments (EDs) could improve care of poisoned patients. However, PCC information systems are not designed to facilitate HIE with EDs; therefore, we are developing specialized software to support HIE within the normal workflow of the PCC using user-centered design and rapid prototyping. Objective To describe the design of an HIE dashboard and the refinement of user requirements through rapid prototyping. Methods Using previously elicited user requirements, we designed low-fidelity sketches of designs on paper with iterative refinement. Next, we designed an interactive high-fidelity prototype and conducted scenario-based usability tests with end users. Users were asked to think aloud while accomplishing tasks related to a case vignette. After testing, the users provided feedback and evaluated the prototype using the System Usability Scale (SUS). Results Survey results from three users provided useful feedback that was then incorporated into the design. After achieving a stable design, we used the prototype itself as the specification for development of the actual software. Benefits of prototyping included having 1) subject-matter experts heavily involved with the design; 2) flexibility to make rapid changes, 3) the ability to minimize software development efforts early in the design stage; 4) rapid finalization of requirements; 5) early visualization of designs; 6) and a powerful vehicle for communication of the design to the programmers. Challenges included 1) time and effort to develop the prototypes and case scenarios; 2) no simulation of system performance; 3) not having all proposed functionality available in the final product; and 4) missing needed data elements in the PCC information system. PMID:27081404

  17. The Uses of Printed Curriculum Materials by Teachers during Instruction and the Social Construction of Pedagogic Discourse in Physical Education

    Science.gov (United States)

    Peiró-Velert, Carmen; Molina-Alventosa, Pere; Kirk, David; Devís-Devís, José

    2015-01-01

    This paper examines teachers' use of printed curriculum materials (PCM) during physical education (PE) instruction in Spanish secondary schools and the role they play in the enacted curriculum and in the construction of pedagogical knowledge. Three hundred and ten participants (mean age: 37.7 ± 8.7) responded to an interview-questionnaire on…

  18. Instructional Modules for Training Special Education Teachers: A Final Report on the Development and Field Testing of the CUNY-CBTEP Special Education Modules. Case 30-76. Toward Competence Instructional Materials for Teacher Education.

    Science.gov (United States)

    City Univ. of New York, NY. Center for Advanced Study in Education.

    The City University of New York Competency Based Teacher Education Project (CUNY-CBTEP) in Special Education studied Modularization, focusing on the variables in the instructional setting that facilitate learning from modular materials for a wide range of students. Four of the five modules for the training of special education teachers developed…

  19. Prototypical Rod Consolidation Demonstration Project

    International Nuclear Information System (INIS)

    1993-05-01

    The objective of Phase 3 of the Prototypical Rod consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod consolidation System as described in the NUS Phase 2 Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase 3 effort the system was tested on a component, subsystem, and system level. This volume 1, discusses the PRCDP Phase 3 Test Program that was conducted by the HALLIBURTON NUS Environmental Corporation under contract AC07-86ID12651 with the United States Department of Energy. This document, Volume 1, Book 2 discusses the following topics: Fuel Rod Extraction System Test Results and Analysis Reports and Clamping Table Test Results and Analysis Reports

  20. Developing Computer-Assisted Instruction Multimedia For Educational Technology Course of Coastal Area Students

    Science.gov (United States)

    Idris, Husni; Nurhayati, Nurhayati; Satriani, Satriani

    2018-05-01

    This research aims to a) identify instructional software (interactive multimedia CDs) by developing Computer-Assisted Instruction (CAI) multimedia that is eligible to be used in the instruction of the Educational Technology course; b) analysis the role of instructional software (interactive multimedia CDs) on the Educational Technology course through the development of Computer-Assisted Instruction (CAI) multimedia to improve the quality of education and instructional activities. This is Research and Development (R&D). It employed the descriptive procedural model of development, which outlines the steps to be taken to develop a product, which is instructional multimedia. The number of subjects of the research trial or respondents for each stage was 20 people. To maintain development quality, an expert in materials outside the materials under study, an expert in materials who is also a Educational Technology lecturer, a small groupof 3 students, a medium-sized group of 10 students, and 20 students to participate in the field testing took part in this research. Then, data collection instruments were developed in two stages, namely: a) developing the instruments; and b) trying out instruments. Data on students’ responses were collected using questionnaires and analyzed using descriptive statistics with percentage and categorization techniques. Based on data analysis results, it is revealed that the Computer-Assisted Instruction (CAI) multimedia developed and tried out among students during the preliminary field testing falls into the “Good” category, with the aspects of instruction, materials, and media falling into the “Good” category. Subsequently, results of the main field testing among students also suggest that it falls into the “Good” category, with the aspects of instruction, materials, and media falling into the “Good” category. Similarly, results of the operational field testing among students also suggest that it falls into the

  1. Orientation: Automotive Mechanics Instructional Program. Block 1.

    Science.gov (United States)

    O'Brien, Ralph D.

    The first six instructional blocks in automotive mechanics, the lessons and supportive information in the document provide a guide for teachers in planning an instructional program in the basic theory and practice of a beginning course at the secondary and post-secondary level. The material, as organized, is a suggested sequence of instruction…

  2. Understanding and responding the students in learning mathematics through the differentiated instruction

    Science.gov (United States)

    Hapsari, T.; Darhim; Dahlan, J. A.

    2018-05-01

    This research discusses the differentiated instruction, a mathematic learning which is as expected by the students in connection with the differentiated instruction itself, its implementation, and the students’ responses. This research employs a survey method which involves 62 students as the research respondents. The mathematics learning types required by the students and their responses to the differentiated instruction are examined through questionnaire and interview. The mathematics learning types in orderly required by the students, from the highest frequency cover the easily understood instructions, slowly/not rushing teaching, fun, not complicated, interspersed with humour, various question practices, not too serious, and conducive class atmosphere for the instructions. Implementing the differentiated instruction is not easy. The teacher should be able to constantly assess the students, s/he should have good knowledge of relevant materials and instructions, and properly prepare the instructions, although it is time-consuming. The differentiated instruction is implemented on the instructions of numerical pattern materials. The strategies implemented are flexible grouping, tiered assignment, and compacting. The students positively respond the differentiated learning instruction that they become more motivated and involved in the instruction.

  3. Comparing Two Modes of Instruction in English Passive Structures (Processing and Meaning-Based Output Instruction

    Directory of Open Access Journals (Sweden)

    Asma Dabiri

    2018-04-01

    Full Text Available This research compared the effects of two types of instruction: Processing Instruction (PI and Meaning-based Output Instruction (MOI on the interpretation and production of English passive structures.  Ninety EFL intermediate tertiary level female students (PI group= 30, MOI group= 30 and control group = 30 participated in this study. The instruments were a proficiency test, a test to assess English passive structures and two instructional materials (PI and MOI. The data were analyzed by running one-way analysis of variance (ANOVA and mixed between-within ANOVA. The study indicated the effectiveness of PI and MOI on English passive structures. PI had considerable enhancement on interpretation tasks all the time. It supported the use of PI rather than the use of traditional instructions in which mechanical components were emphasized. Also, the PI and MOI had long term effects on the interpretation and production of English passive sentences.  This study supported the use of PI and MOI rather than the use of traditional instruction (TI in EFL settings. The implication for particularly classroom teaching is that successful grammar instruction has to related to ultimate learning outcomes. Also, creating communicative tasks to offer opportunities for teaching grammar can lead to long-lasting learning effects.

  4. Fabrication of the wing and vertical target dummy armour prototypes of the ITER divertor

    Energy Technology Data Exchange (ETDEWEB)

    Grattarola, M. E-mail: gratta@ari.ansaldo.it; Bet, M.; Biagiotti, B.; Gandini, G.; Merola, M.; Ottonello, G.B.; Riccardi, B.; Vieider, G.; Zacchia, F

    2000-11-01

    The dummy armour prototypes are identical to the reference components in terms of geometry, cooling circuit and material except for the armour material, which is replaced by an equivalent thickness of copper alloy. The main objectives of the dummy armour prototypes are the demonstration of the overall engineering concept of the Divertor, the integration in a 3 deg. cassette together with components manufactured by the other ITER Home Teams and the successive thermo-hydraulic tests on the whole Divertor module. This paper describes the realization of both the wing and the vertical target dummy armour prototypes focusing on the critical aspects of the fabrication and their impact on a further industrialization of the components.

  5. Fabrication of the wing and vertical target dummy armour prototypes of the ITER divertor

    International Nuclear Information System (INIS)

    Grattarola, M.; Bet, M.; Biagiotti, B.; Gandini, G.; Merola, M.; Ottonello, G.B.; Riccardi, B.; Vieider, G.; Zacchia, F.

    2000-01-01

    The dummy armour prototypes are identical to the reference components in terms of geometry, cooling circuit and material except for the armour material, which is replaced by an equivalent thickness of copper alloy. The main objectives of the dummy armour prototypes are the demonstration of the overall engineering concept of the Divertor, the integration in a 3 deg. cassette together with components manufactured by the other ITER Home Teams and the successive thermo-hydraulic tests on the whole Divertor module. This paper describes the realization of both the wing and the vertical target dummy armour prototypes focusing on the critical aspects of the fabrication and their impact on a further industrialization of the components

  6. The Use of Audio and Animation in Computer Based Instruction.

    Science.gov (United States)

    Koroghlanian, Carol; Klein, James D.

    This study investigated the effects of audio, animation, and spatial ability in a computer-based instructional program for biology. The program presented instructional material via test or audio with lean text and included eight instructional sequences presented either via static illustrations or animations. High school students enrolled in a…

  7. The tensile strength of mechanical joint prototype of lontar fiber composite

    Science.gov (United States)

    Bale, Jefri; Adoe, Dominggus G. H.; Boimau, Kristomus; Sakera, Thomas

    2018-03-01

    In the present study, an experimental activity has been programmed to investigate the effect of joint prototype configuration on tensile strength of lontar (Borassus Flabellifer) fiber composite. To do so, a series of tests were conducted to establish the tensile strength of different joint prototype configuration specimen of lontar fiber composite. In addition, post observation of macroscope was used to map damage behavior. The analysis of lontar fiber composite is a challenge since the material has limited information than others natural fiber composites materials. The results shown that, under static tensile loading, the tensile strength of 13 MPa produced by single lap joint of lontar fiber composite is highest compare to 11 MPa of tensile strength generated by step lap joint and double lap joint where produced the lowest tensile strength of 6 MPa. It is concluded that the differences of tensile strength depend on the geometric dimensions of the cross-sectional area and stress distribution of each joint prototype configuration.

  8. How Experiments in the Fuzzy Front End Using Prototyping Generates New Options

    DEFF Research Database (Denmark)

    Christiansen, John K.; Gasparin, Marta

    2017-01-01

    be characterized as various forms of prototyping. Interestingly the prototyping and experiments took place in the very early phases of the innovation process, rather than later as often advised and interestingly experimentation in the cases here appears to be a vehicle for creating new options. Furthermore......, the analysis demonstrates that prototyping can be considered as a punctuation device, as it offers those involved the option of opting out of ongoing processes, routines and engage in playful behavior by allowing for a freer experimentation with materials, processes, methods to challenge existing knowledge...

  9. Designing Preclinical Instruction for Psychomotor Skills (III)--Instructional Engineering: Design Phase.

    Science.gov (United States)

    Guenzel, Pamela J.; And Others

    1995-01-01

    In the third of a series of articles on teaching psychomotor skills in dental education, the design of instructional materials is discussed. Steps include identifying appropriate teaching strategies for the tasks; organizing and sequencing subskills; identifying and collecting common errors; and drafting learning exercises for each subskill. (MSE)

  10. Neural basis of scientific innovation induced by heuristic prototype.

    Directory of Open Access Journals (Sweden)

    Junlong Luo

    Full Text Available A number of major inventions in history have been based on bionic imitation. Heuristics, by applying biological systems to the creation of artificial devices and machines, might be one of the most critical processes in scientific innovation. In particular, prototype heuristics propositions that innovation may engage automatic activation of a prototype such as a biological system to form novel associations between a prototype's function and problem-solving. We speculated that the cortical dissociation between the automatic activation and forming novel associations in innovation is critical point to heuristic creativity. In the present study, novel and old scientific innovations (NSI and OSI were selected as experimental materials in using learning-testing paradigm to explore the neural basis of scientific innovation induced by heuristic prototype. College students were required to resolve NSI problems (to which they did not know the answers and OSI problems (to which they knew the answers. From two fMRI experiments, our results showed that the subjects could resolve NSI when provided with heuristic prototypes. In Experiment 1, it was found that the lingual gyrus (LG; BA18 might be related to prototype heuristics in college students resolving NSI after learning a relative prototype. In Experiment 2, the LG (BA18 and precuneus (BA31 were significantly activated for NSI compared to OSI when college students learned all prototypes one day before the test. In addition, the mean beta-values of these brain regions of NSI were all correlated with the behavior accuracy of NSI. As our hypothesis indicated, the findings suggested that the LG might be involved in forming novel associations using heuristic information, while the precuneus might be involved in the automatic activation of heuristic prototype during scientific innovation.

  11. Neural basis of scientific innovation induced by heuristic prototype.

    Science.gov (United States)

    Luo, Junlong; Li, Wenfu; Qiu, Jiang; Wei, Dongtao; Liu, Yijun; Zhang, Qinlin

    2013-01-01

    A number of major inventions in history have been based on bionic imitation. Heuristics, by applying biological systems to the creation of artificial devices and machines, might be one of the most critical processes in scientific innovation. In particular, prototype heuristics propositions that innovation may engage automatic activation of a prototype such as a biological system to form novel associations between a prototype's function and problem-solving. We speculated that the cortical dissociation between the automatic activation and forming novel associations in innovation is critical point to heuristic creativity. In the present study, novel and old scientific innovations (NSI and OSI) were selected as experimental materials in using learning-testing paradigm to explore the neural basis of scientific innovation induced by heuristic prototype. College students were required to resolve NSI problems (to which they did not know the answers) and OSI problems (to which they knew the answers). From two fMRI experiments, our results showed that the subjects could resolve NSI when provided with heuristic prototypes. In Experiment 1, it was found that the lingual gyrus (LG; BA18) might be related to prototype heuristics in college students resolving NSI after learning a relative prototype. In Experiment 2, the LG (BA18) and precuneus (BA31) were significantly activated for NSI compared to OSI when college students learned all prototypes one day before the test. In addition, the mean beta-values of these brain regions of NSI were all correlated with the behavior accuracy of NSI. As our hypothesis indicated, the findings suggested that the LG might be involved in forming novel associations using heuristic information, while the precuneus might be involved in the automatic activation of heuristic prototype during scientific innovation.

  12. Solution Prototype

    DEFF Research Database (Denmark)

    Efeoglu, Arkin; Møller, Charles; Serie, Michel

    2013-01-01

    This paper outlines an artifact building and evaluation proposal. Design Science Research (DSR) studies usually consider encapsulated artifact that have relationships with other artifacts. The solution prototype as a composed artifact demands for a more comprehensive consideration in its systematic...... environment. The solution prototype that is composed from blending product and service prototype has particular impacts on the dualism of DSR’s “Build” and “Evaluate”. Since the mix between product and service prototyping can be varied, there is a demand for a more agile and iterative framework. Van de Ven......’s research framework seems to fit this purpose. Van de Ven allows for an iterative research approach to problem solving with flexible starting point. The research activity is the result between the iteration of two dimensions. This framework focuses on the natural evaluation, particularly on ex...

  13. Use of school gardens in academic instruction.

    Science.gov (United States)

    Graham, Heather; Beall, Deborah Lane; Lussier, Mary; McLaughlin, Peggy; Zidenberg-Cherr, Sheri

    2005-01-01

    To determine the status of gardens in California schools. A self-administered Internet and mailed survey was sent to all California principals (N = 9805). 4194 California school principals. School garden practices, attitudes associated with the use of gardens in schools, and perceptions of barriers to having and using school gardens in academic instruction. Descriptive statistics and chi-square; P science, environmental studies, and nutrition. Principals strongly agreed that resources such as curriculum materials linked to academic instruction and lessons on teaching nutrition in the garden would assist in the school garden being used for academic instruction. Principals deemed the garden as being not to slightly effective at enhancing the school meal program. School gardens appear to be predominantly used by most schools to enhance academic instruction. There is a need for curriculum materials and teacher training for gardening and nutrition. The link between the garden and the school meal program is an area that clearly requires attention. School lunch would be a logical setting for provision of edible produce, in addition to taste-testing of fresh produce in the garden or classroom setting.

  14. Multicultural Music Instruction in the Elementary School: What Can Be Achieved?

    Science.gov (United States)

    Edwards, Kay L.

    1998-01-01

    Investigates fourth-grade students' achievement following a model unit on American Indian music that utilized four different instructional approaches. Suggests implications for instruction with American Indian music regarding instructional approach, authenticity of instrument materials, learning from a native guest artist, and music teacher…

  15. Mass Communication: Technology Use and Instruction. ERIC Digest.

    Science.gov (United States)

    Brynildssen, Shawna

    This Digest reviews the literature on recent attempts to incorporate technology into the instruction of journalism and mass communication. It first discusses the four main categories of current technology use in journalism and mass communication: classroom instruction; online syllabi/materials; distance learning; and technological literacy. It…

  16. Sex Education Materials.

    Science.gov (United States)

    Singer-Magdoff, Laura

    1969-01-01

    After briefly discussing the philosophy of sex education and appraising generally the nature of the instructional methods and materials currently in use in the schools, the author provides brief but incisive reviews of a number of films, filmstrips, and other instructional materials dealing with sex. The reviews are continued in the succeeding…

  17. Anaerobic Digestion. Selected Instructional Activities and References. Instructional Resources Monograph Series.

    Science.gov (United States)

    Townsend, Robert D., Comp.

    Focusing specifically on the wastewater treatment process of anaerobic digestion, this document identifies instructional and reference materials for use by professionals in the field in the development and implementation of new programs or in the updating of existing programs. It is designed to help trainers, plant operators, educators, engineers,…

  18. Managing Mathematics: How Does Classroom Management Affect the Maintenance of High Cognitive Demand Tasks during Lessons with Standards-Based Instructional Materials?

    Science.gov (United States)

    Barriteau Phaire, Candace

    2013-01-01

    The teaching and learning of mathematics has been the subject of debate for over 30 years and the most recent reform efforts are in response to concerns regarding the mathematical competence of students in the United States (Ball, Hill, & Bass, 2005; Battista, 1994; Cavanagh, 2008). Standards-based Instructional Materials (SBIM) allows…

  19. Prototypical Rod Consolidation Demonstration Project

    International Nuclear Information System (INIS)

    1993-05-01

    The objective of Phase 3 of the Prototypical Rod consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod consolidation System as described in the NUS Phase 2 Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase 3 effort the system was tested on a component, subsystem, and system level. This volume 1, discusses the PRCDP Phase 3 Test Program that was conducted by the HALLIBURTON NUS Environmental Corporation under contract AC07-86ID12651 with the United States Department of Energy. This document, Volume 1, Book 9 discusses the following topics: Integrated System Normal Operations Test Results and Analysis Report; Integrated System Off-Normal Operations Test Results and Analysis Report; and Integrated System Maintenance Operations Test Results and Analysis Report

  20. Prototypical Rod Consolidation Demonstration Project

    International Nuclear Information System (INIS)

    1993-05-01

    The objective of Phase 3 of the Prototypical Rod consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod consolidation System as described in the NUS Phase 2 Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase 3 effort the system was tested on a component, subsystem, and system level. This volume 1, discusses the PRCDP Phase 3 Test Program that was conducted by the HALLIBURTON NUS Environmental Corporation under contract AC07-86ID12651 with the United States Department of Energy. This document, Volume 1, Book 1 discusses the following topics: the background of the project; test program description; summary of tests and test results; problem evaluation; functional requirements confirmation; recommendations; and completed test documentation for tests performed in Phase 3

  1. Prototypical Rod Construction Demonstration Project

    International Nuclear Information System (INIS)

    1993-05-01

    The objective of Phase 3 of the Prototypical Rod consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod consolidation System as described in the NUS Phase 2 Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase 3 effort the system was tested on a component, subsystem, and system level. This volume 1, discusses the PRCDP Phase 3 Test Program that was conducted by the HALLIBURTON NUS Environmental Corporation under contract AC07-86ID12651 with the United States Department of Energy. This document, Volume 1, Book 3 discusses the following topics: Downender Test Results and Analysis Report; NFBC Canister Upender Test Results and Analysis Report; Fuel Assembly Handling Fixture Test Results and Analysis Report; and Fuel Canister Upender Test Results and Analysis Report

  2. Cooperative Prototyping Experiments

    DEFF Research Database (Denmark)

    Bødker, Susanne; Grønbæk, Kaj

    1989-01-01

    This paper describes experiments with a design technique that we denote cooperative prototyping. The experiments consider design of a patient case record system for municipal dental clinics in which we used HyperCard, an off the shelf programming environment for the Macintosh. In the ecperiments we...... tried to achieve a fluent work-like evaluation of prototypes where users envisioned future work with a computer tool, at the same time as we made on-line modifications of prototypes in cooperation with the users when breakdown occur in their work-like evaluation. The experiments showed...... that it was possible to make a number of direct manipulation changes of prototypes in cooperation with the users, in interplay with their fluent work-like evaluation of these. However, breakdown occurred in the prototyping process when we reached the limits of the direct manipulation support for modification. From...

  3. Unikabeton Prototype

    DEFF Research Database (Denmark)

    Søndergaard, Asbjørn; Dombernowsky, Per

    2011-01-01

    The Unikabeton prototype structure was developed as the finalization of the cross-disciplinary research project Unikabeton, exploring the architectural potential in linking the computational process of topology optimisation with robot fabrication of concrete casting moulds. The project was elabor......The Unikabeton prototype structure was developed as the finalization of the cross-disciplinary research project Unikabeton, exploring the architectural potential in linking the computational process of topology optimisation with robot fabrication of concrete casting moulds. The project...... of Architecture was to develop a series of optimisation experiments, concluding in the design and optimisation of a full scale prototype concrete structure....

  4. Inclusive differentiated instruction

    Directory of Open Access Journals (Sweden)

    Jerković Ljiljana S.

    2017-01-01

    Full Text Available Inclusive differentiated instruction is a new model of didactic instruction, theoretically described and established in this paper for the first time, after being experimentally verified through teaching of the mother tongue (instruction in reading and literature. Inclusive individually planned instruction is based on a phenomenological and constructivist didactic instructional paradigm. This type of teaching is essentially developmental and person-oriented. The key stages of inclusive differentiated instruction of literature are: 1 recognition of individual students' potential and educational needs regarding reading and work on literary texts; 2 planning and preparation of inclusive individually planned instruction in reading and literature; 3 actual class teaching of lessons thus prepared; and 4 evaluation of the student achievement following inclusive differentiated instruction in reading and literature. A highly important element of the planning and preparation of inclusive differentiated instruction is the creation of student profiles and inclusive individualized syllabi. Individualized syllabi specify the following: 1. a brief student profile; 2. the student position on the continuum of the learning outcomes of instruction in the Serbian language; 3. reverse-engineered macro-plan stages of instruction in the Serbian language (3.1. identifying expected outcomes and fundamental qualities of learners' work, 3.2. defining acceptable proofs of their realisation, 3.3. planning learning and teaching experiences, and 3.4. providing material and technical requisites for teaching; 4 the contents and procedure of individualized lessons targeting the student; 5 a plan of syllabus implementation monitoring and evaluation. The continuum of the learning outcomes of inclusive differentiated instruction in literature exists at three main levels, A, B and C. The three levels are: A reading techniques and learning about the main literary theory concepts; B

  5. Teaching about Modern Germany: Instructional Materials for the Social Studies Classroom. Correlation Charts Indicating Content and Skills Addressed by Each Lesson.

    Science.gov (United States)

    Goethe House, New York, NY.

    This instructional booklet for the social studies classroom is a companion to a series about modern day Germany. The materials describe the documents in the series and present correlation charts for content and skills: (1) "A Kid Like Me across the Sea"; (2) "Communities and Regions"; (3) "Overview of Germany"; (4)…

  6. Tool application CAD / CAM for design and construction of a prototype of plastic injection mold

    Directory of Open Access Journals (Sweden)

    Albert Miyer Suárez Castrillón

    2015-11-01

    Full Text Available The study, development and production of injection molds comes with the implementation of CAD and CAM tools available on the market; using these tools, a prototype injection mold for thermoplastic materials was designed and built, based on a mold is injection in the laboratory of the University of Pamplona, in which a couple of modifications were made in order to experiment with its design. The prototype was manufactured through a 3D scan of the original mold to provide the CAD / CAM files with the simulated 3D printing technique for performing an experimental study with the prototype for adjusting temperature and pressure sensors and for coatings metallic materials for use in the injection molding process.

  7. Paper in architecture: Research by design, engineering and prototyping

    Directory of Open Access Journals (Sweden)

    Jerzy F. Latka

    2017-11-01

    in terms of architecture, its material properties were researched on a micro, meso and macro level. This research of the possible applications of paper in architecture was informed by two main research questions: What is paper and to what extent can it be used in architecture? What is the most suitable way to use paper in emergency architecture? To answer the first research question, fundamental and material research on paper and paper products had to be conducted. The composition of the material, production methods and properties of paper were researched. Then paper products with the potential to be used in architecture were examined. The history of the development of paper and its influence on civilisation helped the author gain a better understanding of the nature of this material, which we encounter in our lives every day. Research on objects for everyday use, furniture, pavilions and architecture realised in the last 150 years allowed the author to distinguish various types of paper design and paper architecture. Analysis of realised buildings in which paper products were used as structural elements and parts of the building envelope resulted in a wide array of possible solutions. Structural systems, types of connections between the various elements, impregnation methods and the functionalities and lifespan of different types of buildings were systematised. The knowledge thus collected allowed the author to conduct a further exploration of paper architecture in the form of designs and prototypes. To answer the second research question, the analysed case studies were translated into designs and prototypes of emergency shelters. During the research-by-design, engineering and prototyping phases, more than a dozen prototypes were built. The prototypes differed in terms of structural systems, used materials, connections between structural elements, impregnation methods, functionality and types of building. The three versions of the Transportable Emergency Cardboard

  8. Using the Microcomputer to Generate Materials for Bibliographic Instruction.

    Science.gov (United States)

    Hendley, Gaby G.

    Guide-worksheets were developed on a word processor in a high school library for bibliographic instruction of English and social studies students to cover the following reference sources: Facts on File; Social Issues Resource Series (S.I.R.S.); Editorial Research Reports; Great Contemporary Issues (New York Times), which also includes Facts on…

  9. Prototyping real-time systems

    OpenAIRE

    Clynch, Gary

    1994-01-01

    The traditional software development paradigm, the waterfall life cycle model, is defective when used for developing real-time systems. This thesis puts forward an executable prototyping approach for the development of real-time systems. A prototyping system is proposed which uses ESML (Extended Systems Modelling Language) as a prototype specification language. The prototyping system advocates the translation of non-executable ESML specifications into executable LOOPN (Language of Object ...

  10. DOE's annealing prototype demonstration projects

    International Nuclear Information System (INIS)

    Warren, J.; Nakos, J.; Rochau, G.

    1997-01-01

    One of the challenges U.S. utilities face in addressing technical issues associated with the aging of nuclear power plants is the long-term effect of plant operation on reactor pressure vessels (RPVs). As a nuclear plant operates, its RPV is exposed to neutrons. For certain plants, this neutron exposure can cause embrittlement of some of the RPV welds which can shorten the useful life of the RPV. This RPV embrittlement issue has the potential to affect the continued operation of a number of operating U.S. pressurized water reactor (PWR) plants. However, RPV material properties affected by long-term irradiation are recoverable through a thermal annealing treatment of the RPV. Although a dozen Russian-designed RPVs and several U.S. military vessels have been successfully annealed, U.S. utilities have stated that a successful annealing demonstration of a U.S. RPV is a prerequisite for annealing a licensed U.S. nuclear power plant. In May 1995, the Department of Energy's Sandia National Laboratories awarded two cost-shared contracts to evaluate the feasibility of annealing U.S. licensed plants by conducting an anneal of an installed RPV using two different heating technologies. The contracts were awarded to the American Society of Mechanical Engineers (ASME) Center for Research and Technology Development (CRTD) and MPR Associates (MPR). The ASME team completed its annealing prototype demonstration in July 1996, using an indirect gas furnace at the uncompleted Public Service of Indiana's Marble Hill nuclear power plant. The MPR team's annealing prototype demonstration was scheduled to be completed in early 1997, using a direct heat electrical furnace at the uncompleted Consumers Power Company's nuclear power plant at Midland, Michigan. This paper describes the Department's annealing prototype demonstration goals and objectives; the tasks, deliverables, and results to date for each annealing prototype demonstration; and the remaining annealing technology challenges

  11. THE WHATS, WHYS, HOWS AND WHOS OF CONTENT-BASED INSTRUCTION IN SECOND/FOREIGN LANGUAGE EDUCATION

    Directory of Open Access Journals (Sweden)

    María Dueñas

    2004-06-01

    Full Text Available As an instructional practice in second and foreign language education, content-based instruction is not a fully revolutionary paradigm, but a spin-off approach which derives from the evolution of Communicative Language Teaching. Sharing with CLT the same fundamental principies, CBI bases its idiosyncrasy on promoting the use of subject matter for secondlforeign language teaching purposes. This article aims at exploring the nature and scope of the content-based methodological framework -the whats-, the theoretical foundations that support it -the whys-, and the different prototype models for application in compliance with parameters such as institutional requirements, educational leve], and the particular nature and object of instruction -the hows. Additionally, it will also undertake a review of a copious nurnber of references selected from the existing literature, mostly contributed by researchers and experienced practitioners in the field -the whos.

  12. Design Models as Emergent Features: An Empirical Study in Communication and Shared Mental Models in Instructional

    Science.gov (United States)

    Botturi, Luca

    2006-01-01

    This paper reports the results of an empirical study that investigated the instructional design process of three teams involved in the development of an e-­learning unit. The teams declared they were using the same fast-­prototyping design and development model, and were composed of the same roles (although with a different number of SMEs).…

  13. Evaluation of the Ca ion release, pH and surface apatite formation of a prototype tricalcium silicate cement.

    Science.gov (United States)

    Yamamoto, S; Han, L; Noiri, Y; Okiji, T

    2017-12-01

    To evaluate the Ca 2+ -releasing, alkalizing and apatite-like surface precipitate-forming abilities of a prototype tricalcium silicate cement, which was mainly composed of synthetically prepared tricalcium silicate and zirconium oxide radiopacifier. The prototype tricalcium silicate cement, white ProRoot MTA (WMTA) and TheraCal LC (a light-cured resin-modified calcium silicate-filled material) were examined. The chemical compositions were analysed with a wavelength-dispersive X-ray spectroscopy electron probe microanalyser with an image observation function (SEM-EPMA). The pH and Ca 2+ concentrations of water in which the set materials had been immersed were measured, and the latter was assessed with the EDTA titration method. The surface precipitates formed on the materials immersed in phosphate-buffered saline (PBS) were analysed with SEM-EPMA and X-ray diffraction (XRD). Kruskal-Wallis tests followed by Mann-Whitney U-test with Bonferroni correction were used for statistical analysis (α = 0.05). The prototype cement contained Ca, Si and Zr as major elemental constituents, whereas it did not contain some metal elements that were detected in the other materials. The Ca 2+ concentrations and pH of the immersion water samples exhibited the following order: WMTA = prototype cement > TheraCal LC (P prototype cement and WMTA. The prototype tricalcium silicate cement exhibited similar Ca 2+ -releasing, alkalizing and apatite-like precipitate-forming abilities to WMTA. The Ca 2+ -releasing, alkalizing and apatite-like precipitate-forming abilities of TheraCal LC were lower than those of the other materials. © 2016 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  14. Preventing information overload: cognitive load theory as an instructional framework for teaching pharmacology.

    Science.gov (United States)

    Kaylor, Sara K

    2014-02-01

    Nursing students are challenged by content-laden curricula and learning environments that emphasize testing outcomes. Likewise, educators are challenged to support student-centered learning in a manner that encourages students to connect and act upon their personal motivations. This article describes the use of cognitive load theory (CLT) as an instructional design framework for an undergraduate pharmacology for nursing course. Guided by the principles of CLT, four instructional strategies were used in this course: (a) opening review activities, (b) providing students with lecture notes, (c) a "Top Five" prototype approach, and (d) deciphering "Need to Knows" from "Nice to Knows." Instructional style and strategies received positive student feedback and were found to promote a student-centered environment and active learning. On the basis of this feedback, cognitive load theory may be a successful and effective framework for undergraduate pharmacology and other nursing courses, thus assisting students and educators alike in overcoming obstacles imposed on learning environments. Copyright 2014, SLACK Incorporated.

  15. Mechanical properties used for the qualification of transport casks: Prototype development and extension to serial production

    International Nuclear Information System (INIS)

    Salzbrenner, R.; Crenshaw, T.B.; Sorenson, K.B.

    1991-01-01

    A thorough understanding of the mechanical behavior of material in a specific cask is required to properly analyze the structural response of the cask. An appropriate way to establish this understanding is through laboratory testing of cask material. The laboratory testing that was done to support the MOSAIK Drop Test Program is summarized as an example of how mechanical properties can be mapped for a prototype cask. The broad range behavior to be understood. This is necessary for the proper application of fracture mechanics, and focuses on fracture toughness as the inherent materials property which quantifies the fracture resistance of a material. The understanding established by a mechanics to a particular prototype, behavior of a prototype must be correctly associated with parameters which can be measured on production casks. Since the production casks cannot be destructively tested, measurements are commonly made on sub-size specimens. This may prevent direct measurement of valid design properties. An additional database may then be required to establish the correlation between sub-size specimen measurements and valid design properties. This is illustrated by outlining the additional testing which would be necessary to allow the successful verification of the MOSAIK Drop Test Program to be extended from the prototype to serially produced casks

  16. Rapid prototyping of robotic platforms

    CSIR Research Space (South Africa)

    De Ronde, Willis

    2016-11-01

    Full Text Available of thickness up to 200mm can be cut to create prototype chassis/ bodies or even the final product. One of the few limitations is the cutting of certain laminated materials, as this tends to produce delaminated cutting edges or even fractures in the case... mine inspection robot (Shongololo). Shongololo’s frame is made from engineering plastics while the chassis of Dassie was made from aluminium and cut using abrasive waterjet machining. The advantage of using abrasive waterjet machining is the speed...

  17. A lightweight field cage for a large TPC prototype for the ILC

    Energy Technology Data Exchange (ETDEWEB)

    Behnke, Ties; Dehmelt, Klaus; Diener, Ralf; Hallermann, Lea; Matsuda, Takeshi; Prahl, Volker; Schade, Peter

    2010-06-15

    We have developed and constructed the field cage of a prototype Time Projection Chamber for research and development studies for a detector at the International Linear Collider. This prototype has an inner diameter of 72 cm and a length of 61 cm. The design of the field cage wall was optimized for a low material budget of 1.21% of a radiation length and a drift field homogeneity of {delta}E/E prototype has been part of a comprehensive test beam setup at DESY and used as a test chamber for the development of Micro Pattern Gas Detector based readout devices. (orig.)

  18. A lightweight field cage for a large TPC prototype for the ILC

    International Nuclear Information System (INIS)

    Behnke, Ties; Dehmelt, Klaus; Diener, Ralf; Hallermann, Lea; Matsuda, Takeshi; Prahl, Volker; Schade, Peter

    2010-06-01

    We have developed and constructed the field cage of a prototype Time Projection Chamber for research and development studies for a detector at the International Linear Collider. This prototype has an inner diameter of 72 cm and a length of 61 cm. The design of the field cage wall was optimized for a low material budget of 1.21% of a radiation length and a drift field homogeneity of ΔE/E -4 . Since November 2008 the prototype has been part of a comprehensive test beam setup at DESY and used as a test chamber for the development of Micro Pattern Gas Detector based readout devices. (orig.)

  19. Apparel. Teacher's Instructional Guide.

    Science.gov (United States)

    Rambo, Patti

    This instructional guide for a one-half credit technological laboratory course for grades 10-12 focuses on apparel from the perspectives of personal decision making related to apparel, the apparel industry, and career preparation. Introductory materials are a course description; overview of course design; facilities, equipment, and resources; and…

  20. Silent method for mathematics instruction: An overview of teaching subsets

    Science.gov (United States)

    Sugiman, Apino, Ezi

    2017-05-01

    Generally, teachers use oral communication for teaching mathematics. Taking an opposite perspective, this paper describes how instructional practices for mathematics can be carried out namely a silent method. Silent method uses body language, written, and oral communication for classroom interaction. This research uses a design research approach consisting of four phases: preliminary, prototyping and developing the instruction, and assessment. There are four stages of silent method. The first stage is conditioning stage in which the teacher introduces the method and makes agreement about the `rule of the game'. It is followed by the second one, elaborating stage, where students guess and explore alternative answers. The third stage is developing mathematical thinking by structuring and symbolizing. Finally, the method is ended by reinforcing stage which aims at strengthening and reflecting student's understanding. In this paper, every stage is described on the basis of practical experiences in a real mathematics classroom setting.

  1. Mechanical prototype of tracking chamber in station 2 in dimuon ...

    Indian Academy of Sciences (India)

    the design and choice of material for the chamber was finalised following the result of the simulation. ... The frames were made from several pieces joined together ... The measured values of the prototype deformation with and without the CPF.

  2. CCP-NAP operator instructions at ANL

    International Nuclear Information System (INIS)

    Tantillo, V.V.

    1986-03-01

    CCP-NAP Operator Instructions at ANL (ANL/TM 435) supplements the CCPGUIDE (Category 26) prepared by the National Magnetic Fusion Energy Computer Center (NMFECC), Lawrence Livermore National Laboratory. The instructions in CCP-NAP Operator Instructions at ANL serve as a reference guide for Computing Services operators when operator intervention is necessary for ANL's MFEnet Nodes located in Building 221, Room A-134. Use this document in conjunction with the CCPGUIDE. The CCPGUIDE, a guide for network operators, outlines the procedures for loading the Communications Control Processor (CCP) and monitoring its activity. The CCPGUIDE contains detailed information on Software Loading, System Status, System Monitoring, Command Summary, etc. The material in this document is the result of additional information provided by Jim Morton and Jim Gigliaridi (NMFECC) when our Argonne National Laboratory/Computing Services MFEnet Nodes were installed. This document provides two formats: QUICK instructions and procedures, and detailed general text

  3. Toward a Common Understanding of Research-Based Instructional Strategies

    Science.gov (United States)

    Goodwin, Deborah; Webb, Mary Ann

    2014-01-01

    A review of available books, articles and on-line resources which deal with "Research-Based Instructional Strategies" will produce a plethora of materials which promote the effectiveness of these strategies on student achievement. Also, a perusal of classroom instruction and teacher evaluation instruments will reveal that many of the…

  4. Automated Loading and Unloading of the Stratasys FDM 1600 Rapid Prototyping System

    OpenAIRE

    Brockmeier, Oivind

    2000-01-01

    Rapid prototyping systems have advanced significantly with respect to material capabilities, fabrication speed, and surface quality. However, build jobs are still manually activated one at a time. The result is non-productive machine time whenever an operator is not at hand to make a job changeover. A low-cost auxiliary system, named Continuous Layered Manufacturing (CLM), has been developed to automatically load and unload the FDM 1600 rapid prototyping system (Stratasys, Inc.). The modifica...

  5. Insider Threat Mitigation Workshop Instructional Materials

    Energy Technology Data Exchange (ETDEWEB)

    Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Larsen, Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); O' Brien, Mike [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Rodriquez, Jose [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2008-01-01

    Insiders represent a formidable threat to nuclear facilities. This set of workshop materials covers methodologies to analyze and approaches to mitigate the threat of an insider attempting abrupt theft of nuclear materials. This report is a compilation of workshop materials consisting of lectures on technical and administrative measures used in Physical Protection (PP) and Material Control and Accounting (MC&A) and methods for analyzing their effectiveness against a postulated insider threat.

  6. Prototypical Rod Consolidation Demonstration Project

    International Nuclear Information System (INIS)

    1993-05-01

    The objective of Phase 3 of the Prototypical Rod consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod consolidation System as described in the NUS Phase 2 Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase 3 effort the system was tested on a component, subsystem, and system level. This volume 1, discusses the PRCDP Phase 3 Test Program that was conducted by the HALLIBURTON NUS Environmental Corporation under contract AC07-86ID12651 with the United States Department of Energy. This document, Volume 1, Book 4 discusses the following topics: Rod Compaction/Loading System Test Results and Analysis Report; Waste Collection System Test Results and Analysis Report; Waste Container Transfer Fixture Test Results and Analysis Report; Staging and Cutting Table Test Results and Analysis Report; and Upper Cutting System Test Results and Analysis Report

  7. Prototypical Rod Consolidation Demonstration Project

    International Nuclear Information System (INIS)

    1993-05-01

    The objective of Phase 3 of the Prototypical Rod consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod consolidation System as described in the NUS Phase 2 Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase 3 effort the system was tested on a component, subsystem, and system level. This volume 1, discusses the PRCDP Phase 3 Test Program that was conducted by the HALLIBURTON NUS Environmental Corporation under contract AC07-86ID12651 with the United States Department of Energy. This document, Volume 1, Book 5 discusses the following topics: Lower Cutting System Test Results and Analysis Report; NFBC Loading System Test Results and Analysis Report; Robotic Bridge Transporter Test Results and Analysis Report; RM-10A Remotec Manipulator Test Results and Analysis Report; and Manipulator Transporter Test Results and Analysis Report

  8. Imagining the prototype

    OpenAIRE

    Brouwer, C. E.; Bhomer, ten, M.; Melkas, H.; Buur, J.

    2013-01-01

    This article reports on the analysis of a design session, employing conversation analysis. In the design session three experts and a designer discuss a prototype of a shirt, which has been developed with the input from these experts. The analysis focuses on the type of involvement of the participants with the prototype and how they explicate the points they make in the discussion with or without making use of the prototype. Three techniques for explicating design issues that exploit the proto...

  9. Development of 63Ni-voltaic nuclear micro-battery prototype

    International Nuclear Information System (INIS)

    Zhang Huaming; Hu Rui; Wang Guanquan; Gao Hui; Liu Guoping; Luo Shunzhong

    2013-01-01

    Crystal silicon based energy-conversion unit was prepared using the parameters from theoretical simulation. A battery prototype was assembled through ascertaining the process of 63 Ni deposition, the formula of sealing materials and the sealing technique. The electric output properties were assessed with accelerating ageing and changing the temperatures. The results show that the open circuit voltage and short circuit current of the manufactured nuclear micro-battery prototype are 88.0 mV and 5.97 nA, and the maximum power output and the energy conversion efficiency are 0.255 nW and 0.561%, respectively. It preserves steadily over 220 days. (authors)

  10. Teaching Machines and Programmed Instruction; an Introduction.

    Science.gov (United States)

    Fry, Edward B.

    Teaching machines and programed instruction represent new methods in education, but they are based on teaching principles established before the development of media technology. Today programed learning materials based on the new technology enjoy increasing popularity for several reasons: they apply sound psychological theories; the materials can…

  11. Wisconsin System for Instructional Management: Terminal Operator Manual. Practical Paper No. 19.

    Science.gov (United States)

    Bozeman, William C.; And Others

    The Wisconsin System for Instructional Management (WIS-SIM) is a computer managed instruction (CMI) system designed to improve instructional decision making in order to maximize the educational progress of each child while making efficient use of the available human, material, and financial resources within an organizational structure such as the…

  12. A prototype stationary Fourier transform spectrometer for near-infrared absorption spectroscopy.

    Science.gov (United States)

    Li, Jinyang; Lu, Dan-feng; Qi, Zhi-mei

    2015-09-01

    A prototype stationary Fourier transform spectrometer (FTS) was constructed with a fiber-coupled lithium niobate (LiNbO3) waveguide Mach-Zehnder interferometer (MZI) for the purpose of rapid on-site spectroscopy of biological and chemical measurands. The MZI contains push-pull electrodes for electro-optic modulation, and its interferogram as a plot of intensity against voltage was obtained by scanning the modulating voltage from -60 to +60 V in 50 ms. The power spectrum of input signal was retrieved by Fourier transform processing of the interferogram combined with the wavelength dispersion of half-wave voltage determined for the MZI used. The prototype FTS operates in the single-mode wavelength range from 1200 to 1700 nm and allows for reproducible spectroscopy. A linear concentration dependence of the absorbance at λmax = 1451 nm for water in ethanolic solution was obtained using the prototype FTS. The near-infrared spectroscopy of solid samples was also implemented, and the different spectra obtained with different materials evidenced the chemical recognition capability of the prototype FTS. To make this prototype FTS practically applicable, work on improving its spectral resolution by increasing the maximum optical path length difference is in progress.

  13. The open prototype for educational NanoSats: Fixing the other side of the small satellite cost equation

    Science.gov (United States)

    Berk, Josh; Straub, Jeremy; Whalen, David

    Government supported nano-satellite launch programs and emerging commercial small satellite launch services are reducing the cost of access to space for educational and other CubeSat projects. The cost and complexity of designing and building these satellites remains a vexing complication for many would be CubeSat aspirants. The Open Prototype for Educational NanoSats (OPEN), a proposed nano-satellite development platform, is described in this paper. OPEN endeavors to reduce the costs and risks associated with educational, government and commercial nano-satellite development. OPEN provides free and publicly available plans for building, testing and operating a versatile, low-cost satellite, based on the standardized CubeSat form-factor. OPEN consists of public-domain educational reference plans, complete with engineering schematics, CAD files, construction and test instructions as well as ancillary reference materials relevant to satellite building and operation. By making the plan, to produce a small but capable spacecraft freely available, OPEN seeks to lower the barriers to access on the other side (non-launch costs) of the satellite cost equation.

  14. An Evaluation of the Instruction Carried out with Printed Laboratory Materials Designed in Accordance with 5E Model: Reflection of Light and Image on a Plane Mirror

    Science.gov (United States)

    Ayvaci, Hakan Sevki; Yildiz, Mehmet; Bakirci, Hasan

    2015-01-01

    This study employed a print laboratory material based on 5E model of constructivist learning approach to teach reflection of light and Image on a Plane Mirror. The effect of the instruction which conducted with the designed print laboratory material on academic achievements of prospective science and technology teachers and their attitudes towards…

  15. Engaging in Argument from Evidence and the Ocean Sciences Sequence for Grades 3-5: A case study in complementing professional learning experiences with instructional materials aligned to instructional goals

    Science.gov (United States)

    Schoedinger, S. E.; Weiss, E. L.

    2016-12-01

    K-5 science teachers, who often lack a science background, have been tasked with a huge challenge in implementing NGSS—to completely change their instructional approach from one that views science as a body of knowledge to be imparted to one that is epistemic in nature. We have found that providing high-quality professional learning (PL) experiences is often not enough and that teachers must have instructional materials that align with their instructional goals. We describe a case study in which the Lawrence Hall of Science (the Hall) used the Hall-developed Ocean Sciences Sequence for Grades 3-5 (OSS 3-5) to support a rigorous PL program for grade 3-5 teachers focused on the NGSS science and engineering practice, engaging in argument from evidence. Developed prior to the release of NGSS, the Ocean Literacy Framework and the NGSS precursor, A Framework for K-12 Science Education, informed the content and instructional approaches of OSS 3-5. OSS 3-5 provides a substantial focus on making evidence-based explanations (and other science practices), while building students' ocean sciences content knowledge. From 2013-2015, the Hall engaged cohorts of teachers in a rigorous PL experience focused on engaging in argument from evidence. During the summer, teachers attended a week-long institute, in which exemplar activities from OSS 3-5 were used to model instructional practices to support arguing from evidence and related practices, e.g., developing and using models and constructing explanations. Immediately afterward, teachers enacted what they'd learned during a two-week summer school practicum. Here, they team-taught the OSS 3-5 curriculum, participated in video reflection groups, and received coaching and just-in-time input from instructors. In the subsequent academic year, many teachers began by teaching OSS 3-5 so that they could practice engaging students in argumentation in curriculum they'd already used for that purpose. Throughout the year, teachers

  16. Studying the Technology of Creating Cortical Electrode Instruments using the Rapid Prototyping Technology

    Directory of Open Access Journals (Sweden)

    Ablyaz T. R.

    2017-06-01

    Full Text Available This paper shows the results of studying the technology of manufacturing cortical electrode-instruments (EI with the use of indirect methods of the Rapid Prototyping technology. Functional EI prototypes were made by layered synthesis of the photopolymer material with the use of the stereolithography technology (SLA - Stereo Lithography Apparatus. The article is focused on two methods of indirect EI manufacturing. One of the EI prototypes was used for making a molded wax model for hot investment casting, followed by applying copper coating. The second prototype was used for applying copper plating to a prepared current-conductive layer. As a result of EDMing a steel workpiece, both EIs reached the desired depth, which is 1 mm. The copper plating applied to the EI preserves its integrity. Through the use of the casting technology, there is a possibility to cut the economic costs by 35%. Using a prototype with preliminarily applied conductive coating makes it possible to make geometrically-complex EIs.

  17. Instruction by Design, A Report on the Conference on New Instructional Materials in Physics (University of Washington, Seattle, June 21-August 21, 1965).

    Science.gov (United States)

    Commission on Coll. Physics, College Park, MD.

    This review has a section devoted to each of the following conference topics: Monographs, Film, Experiment Sequences, Computer-assisted Instruction, Designing a Unit of Instruction, and Toward New Solutions. Each section contains background discussion on the rationale, philosophy, and importance for improvements in the area being considered. The…

  18. Measurement control workshop instructional materials

    Energy Technology Data Exchange (ETDEWEB)

    Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Harvel, Charles [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Clark, John [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gregg Protection Services, Lynchburg, VA (United States)

    2012-09-01

    An essential element in an effective nuclear materials control and accountability (MC&A) program is the measurement of the nuclear material as it is received, moved, processed and shipped. Quality measurement systems and methodologies determine the accuracy of the accountability values. Implementation of a measurement control program is essential to ensure that the measurement systems and methodologies perform as expected. A measurement control program also allows for a determination of the level of confidence in the accounting values.

  19. Measurement control workshop instructional materials

    Energy Technology Data Exchange (ETDEWEB)

    Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Harvel, Charles [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Clark, John [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gregg Protection Services, Lynchburg, VA (United States)

    2011-12-01

    An essential element in an effective nuclear materials control and accountability (MC&A) program is the measurement of the nuclear material as it is received, moved, processed and shipped. Quality measurement systems and methodologies determine the accuracy of the accountability values. Implementation of a measurement control program is essential to ensure that the measurement systems and methodologies perform as expected. A measurement control program also allows for a determination of the level of confidence in the ac counting values.

  20. Supporting Active User Involvment in Prototyping

    DEFF Research Database (Denmark)

    Grønbæk, Kaj

    1990-01-01

    The term prototyping has in recent years become a buzzword in both research and practice of system design due to a number of claimed advantages of prototyping techniques over traditional specification techniques. In particular it is often stated that prototyping facilitates the users' involvement...... in the development process. But prototyping does not automatically imply active user involvement! Thus a cooperative prototyping approach aiming at involving users actively and creatively in system design is proposed in this paper. The key point of the approach is to involve users in activities that closely couple...... development of prototypes to early evaluation of prototypes in envisioned use situations. Having users involved in such activities creates new requirements for tool support. Tools that support direct manipulation of prototypes and simulation of behaviour have shown promise for cooperative prototyping...

  1. Subsea production prototype development for deep water applications

    Energy Technology Data Exchange (ETDEWEB)

    Weibye, B; Varvin, K; Mellingen, T [ed.

    1986-01-01

    The paper presents general goals and preliminary results from a prototype and testing program for the next generation of deepwater subsea production systems, in the following main areas: Transportation pipeline pull-in/connection and pig launching systems for multiwell manifolded diverless gas production systems; Inductive and conductive subsea electrical connectors; control system pilot valves and hydraulic fluids; Subsea electric power generation; monitoring of sand particles in gas flow; tools for remotely operated vehicles; pipeline insulation materials; corrosion inhibition and material selection for transporation of unprocessed hydrocarbons. 5 drawings.

  2. Engineering prototypes for theta-pinch devices

    International Nuclear Information System (INIS)

    Hansborough, L.D.; Hammer, C.F.; Hanks, K.W.; McDonald, T.E.; Nunnally, W.C.

    1975-01-01

    Past, present, and future engineering prototypes for theta-pinch plasma-physics devices at Los Alamos Scientific Laboratory are discussed. Engineering prototypes are designed to test and evaluate all components under system conditions expected on actual plasma-physics experimental devices. The importance of engineering prototype development increases as the size and complexity of the plasma-physics device increases. Past experiences with the Scyllac prototype and the Staged Theta-Pinch prototype are discussed and evaluated. The design of the proposed Staged Scyllac prototype and the Large Staged Scyllac implosion prototype assembly are discussed

  3. Instructional Partners, Principals, Teachers, and Instructional Assistants.

    Science.gov (United States)

    Indiana State Dept. of Public Instruction, Indianapolis.

    This handbook examines various topics of interest and concern to teachers as they work with instructional assistants forming a classroom instructional partnership and functioning as a team. These topics include: (1) instructional assistant qualifications; (2) duties--instructional, classroom clerical, auxillary; (3) factors to be considered when…

  4. Issues to be verified by IFMIF prototype accelerator for engineering validation

    International Nuclear Information System (INIS)

    Sugimoto, M.; Imai, T.; Okumura, Y.; Nakayama, K.; Suzuki, S.; Saigusa, M.

    2002-01-01

    The validation of the accelerator technology providing the 250 mA/40 MeV continuous-wave (CW) deuteron beam with the required quality is a key issue to realize the international fusion materials irradiation facility (IFMIF). As the difficulty of high current accelerator generally comes from the low energy section due to space-charge effects, a prototype test of such a part is planned in the next development phase. The optimal choice of the prototype consists of a full-scale injector, a full-modelled radiofrequency quadrupole, and a short drift tube linear accelerator associated with a beam diagnostics/dump. Through prototype tests, the stable control of the CW accelerator at the various operational conditions will be addressed, and the technical risks of IFMIF accelerator construction can be significantly reduced

  5. Rapid prototyping and evaluation of programmable SIMD SDR processors in LISA

    Science.gov (United States)

    Chen, Ting; Liu, Hengzhu; Zhang, Botao; Liu, Dongpei

    2013-03-01

    With the development of international wireless communication standards, there is an increase in computational requirement for baseband signal processors. Time-to-market pressure makes it impossible to completely redesign new processors for the evolving standards. Due to its high flexibility and low power, software defined radio (SDR) digital signal processors have been proposed as promising technology to replace traditional ASIC and FPGA fashions. In addition, there are large numbers of parallel data processed in computation-intensive functions, which fosters the development of single instruction multiple data (SIMD) architecture in SDR platform. So a new way must be found to prototype the SDR processors efficiently. In this paper we present a bit-and-cycle accurate model of programmable SIMD SDR processors in a machine description language LISA. LISA is a language for instruction set architecture which can gain rapid model at architectural level. In order to evaluate the availability of our proposed processor, three common baseband functions, FFT, FIR digital filter and matrix multiplication have been mapped on the SDR platform. Analytical results showed that the SDR processor achieved the maximum of 47.1% performance boost relative to the opponent processor.

  6. Magnet-Sleeve-Sealed Mini Trochoidal-Gear Pump Prototype with Polymer Composite Gear

    Directory of Open Access Journals (Sweden)

    Pedro Javier Gamez-Montero

    2017-09-01

    Full Text Available The trochoidal-gear technology has been growing in groundbreaking fields. Forthcoming applications are demanding to this technology a step forward in the conceiving stage of positive displacement machines. The compendium of the qualities and the inherent characteristics of trochoidal-gear technology, especially towards the gerotor pump, together with scale/size factor and magnetic-driven transmission has led to the idea of a magnet-sleeve-sealed variable flow mini trochoidal-gear pump. From its original concept, to the last phase of the design development, the proof of concept, this new product will intend to overcome problems such as noise, vibration, maintenance, materials, and dimensions. The paper aims to show the technological path followed from the concept, design, and model, to the manufacture of the first prototype, where the theoretical and numerical approaches are not always directly reflected in the prototype performance results. Early in the design process, from a standard-commercial sintered metal mini trochoidal-gear unit, fundamental characteristics and dimensional limitations have been evaluated becoming the strategic parameters that led to its configuration. The main technical challenge to confront is being sealed with non-exterior driveshaft, ensuring that the whole interior is filled and wetted with working fluid and helping the hydrodynamic film formation, the pumping effect, and the heat dissipation. Subsequently, the mini pump architecture, embodiment, methodology, materials, and manufacture are presented. The trend of applications of polymer composite materials and their benefits wanted to be examined with this new mini pump prototype, and a pure polyoxymethylene mini trochoidal-gear set has been designed and manufactured. Finally, both the sintered and the polymer trochoidal-gear units have been experimentally tested in an in-house full-instrumented mini test bench. Although the main goal of the presented work is the

  7. Computer-based instruction system DIDAK and its application

    International Nuclear Information System (INIS)

    Gvozdjak, L.; Hanulova, L.; Jankovicova, A.; Scepanek, L.

    1983-01-01

    The DIDAK system has been developed for the instruction and training of specialized personnel of nuclear power plants. The structure of the instruction system comprises three processes: the author process, the instruction process and the administration process. Author processes provide the didactic data structure with instruction texts. In the text data base the instruction material is stored in 6 direct access nonformatted files. The instruction system receives information from the text data base and presents it to the student. According to the student's response it creates the preconditions for the further operation of the system which it stores in the data base for administration of instruction. This base contains data on the identification of students, on the instruction process of the individual and the instruction process as a whole. Administrative processes take place in the final stage. They provide information on the general course of instruction and make final evaluations. From the data base of products of the instruction process the said administrative processes produce output information for the teacher. The subject matter of each subject is divided into a finite number of elementary units of subject matter. Each elementary unit provides basic information on the explained subject matter and is followed by a check of the student's knowledge. In dependence on the results of this check the student either advances to a higher level elementary unit or proceeds to an alternative branch of the initial unit. (E.S.)

  8. Effects of Instructional Ratios on Students' Reading Performance in a Regular Education Program.

    Science.gov (United States)

    Roberts, Maura L.; Shapiro, Edward S.

    1996-01-01

    Used 4 experimental conditions to examine the effectiveness of different instructional ratios of known to unknown vocabulary words on the reading progress of 46 students. Results suggest that students acquired new information as instructional ratios expanded. An inverse relationship was established between instructional material presented and…

  9. EPCiR prototype

    DEFF Research Database (Denmark)

    2003-01-01

    A prototype of a residential pervasive computing platform based on OSGi involving among other a mock-up of an health care bandage.......A prototype of a residential pervasive computing platform based on OSGi involving among other a mock-up of an health care bandage....

  10. Manufacturing implant supported auricular prostheses by rapid prototyping techniques.

    Science.gov (United States)

    Karatas, Meltem Ozdemir; Cifter, Ebru Demet; Ozenen, Didem Ozdemir; Balik, Ali; Tuncer, Erman Bulent

    2011-08-01

    Maxillofacial prostheses are usually fabricated on the models obtained following the impression procedures. Disadvantages of conventional impression techniques used in production of facial prosthesis are deformation of soft tissues caused by impression material and disturbance of the patient due to. Additionally production of prosthesis by conventional methods takes longer time. Recently, rapid prototyping techniques have been developed for extraoral prosthesis in order to reduce these disadvantages of conventional methods. Rapid prototyping technique has the potential to simplify the procedure and decrease the laboratory work required. It eliminates the need for measurement impression procedures and preparation of wax model to be performed by prosthodontists themselves In the near future this technology will become a standard for fabricating maxillofacial prostheses.

  11. Improving Instruction through a Videotape Library.

    Science.gov (United States)

    Batesky, James

    1979-01-01

    Videotape and a videotape library can be used to expand the quality of instruction of a physical education program by allowing greater diversity of material taught and increased use of professionals and experts in various sports. (JMF)

  12. Fast-prototyping of VLSI

    International Nuclear Information System (INIS)

    Saucier, G.; Read, E.

    1987-01-01

    Fast-prototyping will be a reality in the very near future if both straightforward design methods and fast manufacturing facilities are available. This book focuses, first, on the motivation for fast-prototyping. Economic aspects and market considerations are analysed by European and Japanese companies. In the second chapter, new design methods are identified, mainly for full custom circuits. Of course, silicon compilers play a key role and the introduction of artificial intelligence techniques sheds a new light on the subject. At present, fast-prototyping on gate arrays or on standard cells is the most conventional technique and the third chapter updates the state-of-the art in this area. The fourth chapter concentrates specifically on the e-beam direct-writing for submicron IC technologies. In the fifth chapter, a strategic point in fast-prototyping, namely the test problem is addressed. The design for testability and the interface to the test equipment are mandatory to fulfill the test requirement for fast-prototyping. Finally, the last chapter deals with the subject of education when many people complain about the lack of use of fast-prototyping in higher education for VLSI

  13. 18 CFR 367.9090 - Account 909, Informational and instructional advertising expenses.

    Science.gov (United States)

    2010-04-01

    ..., Informational and instructional advertising expenses. 367.9090 Section 367.9090 Conservation of Power and Water... Account 909, Informational and instructional advertising expenses. (a) This account must include the cost... supervision of informational activities. (2) Preparing informational materials for newspapers, periodicals...

  14. Market Segmentation: An Instructional Module.

    Science.gov (United States)

    Wright, Peter H.

    A concept-based introduction to market segmentation is provided in this instructional module for undergraduate and graduate transportation-related courses. The material can be used in many disciplines including engineering, business, marketing, and technology. The concept of market segmentation is primarily a transportation planning technique by…

  15. Teaching Floating and Sinking Concepts with Different Methods and Techniques Based on the 5E Instructional Model

    Science.gov (United States)

    Cepni, Salih; Sahin, Cigdem; Ipek, Hava

    2010-01-01

    The purpose of this study was to test the influences of prepared instructional material based on the 5E instructional model combined with CCT, CC, animations, worksheets and POE on conceptual changes about floating and sinking concepts. The experimental group was taught with teaching material based on the 5E instructional model enriched with…

  16. The effectiveness of direct instruction for teaching language to children with autism spectrum disorders: identifying materials.

    Science.gov (United States)

    Ganz, Jennifer B; Flores, Margaret M

    2009-01-01

    Students with autism spectrum disorders (ASD) frequently demonstrate language delays (American Psychiatric Association 2000). This study investigated the effects of a Direct Instruction (DI) language program implemented with elementary students with ASD. There is little research in the area of DI as a language intervention for students with ASD. This study examined the effectiveness of DI with regard to students' oral language skills, specifically the identification of materials of which objects were made. A single-subject changing criterion design was employed. A functional relation between DI and oral language skills was demonstrated through replication of skill increase over three criterion changes and across three students. The results and their implications are discussed further.

  17. Regression Analysis: Instructional Resource for Cost/Managerial Accounting

    Science.gov (United States)

    Stout, David E.

    2015-01-01

    This paper describes a classroom-tested instructional resource, grounded in principles of active learning and a constructivism, that embraces two primary objectives: "demystify" for accounting students technical material from statistics regarding ordinary least-squares (OLS) regression analysis--material that students may find obscure or…

  18. What English Language Arts, Math, and Science Instructional Materials Have Districts in the Mid-Atlantic Region States Adopted? Issues & Answers. REL 2010-No. 096

    Science.gov (United States)

    Burzichelli, Claudia; Morrill, William; Bausmith, Jennifer; Mackey, Philip E.; Magarelli, Christopher

    2010-01-01

    Despite increasing accountability requirements and a national call for transparency in public policy, Mid-Atlantic Region state education agencies indicate that they have little information about what instructional materials districts adopt. This report describes first-year results of an ongoing project to generate and share information on core…

  19. Drawing conclusions: The effect of instructions on children's confabulation and fantasy errors.

    Science.gov (United States)

    Macleod, Emily; Gross, Julien; Hayne, Harlene

    2016-01-01

    Drawing is commonly used in forensic and clinical interviews with children. In these interviews, children are often allowed to draw without specific instructions about the purpose of the drawing materials. Here, we examined whether this practice influenced the accuracy of children's reports. Seventy-four 5- and 6-year-old children were interviewed one to two days after they took part in an interactive event. Some children were given drawing materials to use during the interview. Of these children, some were instructed to draw about the event, and some were given no additional instructions at all. Children who were instructed to draw about the event, or who were interviewed without drawing, made few errors. In contrast, children who drew without being given specific instructions reported more errors that were associated with both confabulation and fantasy. We conclude that, to maximise accuracy during interviews involving drawing, children should be directed to draw specifically about the interview topic.

  20. First Study Of HEPA Filter Prototype Performance To Control The Airborne Pollution

    International Nuclear Information System (INIS)

    Soetomo; Suwarno

    2000-01-01

    This paper will report the efficiency test result of the filtration tool prototype of High Efficiency Particulate Air (HEPA filter) for low temperature, to control the airborne pollution of aerosol particle of solid and liquid. The prototype design of HEPA filter was based on the characteristic data of filter material (fibrous diameter, density, filter thickness), flow rate of air and first pressure drop. From the result of laboratory scale test, using DOP/PSL aerosol with 0,3 mum diameter and the flow rate of 3,78 m exp.3/min, was obtained filtration efficiency revolve between 89,90 and 99,94 % for the filter prototype of A, B, C, and D. the efficiency estimation of theory with filtration programme and the experiment was different amount 1 %. The value of the prototype efficiency of D filter was not far different with AAF-USA filter and its price is cheaper 30 % than the price of AAF-USA filter

  1. Prototype Systems for Measuring Outdoor Air Intake Rates in Rooftop Air Handlers

    Energy Technology Data Exchange (ETDEWEB)

    Fisk, William J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Chan, Wanyu R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hotchi, Toshifumi [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-01-01

    The widespread absence of systems for real-time measurement and feedback control, of minimum outdoor air intake rates in HVAC systems contributes to the poor control of ventilation rates in commercial buildings. Ventilation rates affect building energy consumption and influence occupant health. The project designed fabricated and tested four prototypes of systems for measuring rates of outdoor air intake into roof top air handlers. All prototypes met the ±20% accuracy target at low wind speeds, with all prototypes accurate within approximately ±10% after application of calibration equations. One prototype met the accuracy target without a calibration. With two of four prototype measurement systems, there was no evidence that wind speed or direction affected accuracy; however, winds speeds were generally below usually 3.5 m s-1 (12.6 km h-1) and further testing is desirable. The airflow resistance of the prototypes was generally less than 35 Pa at maximum RTU air flow rates. A pressure drop of this magnitude will increase fan energy consumption by approximately 4%. The project did not have resources necessary to estimate costs of mass produced systems. The retail cost of components and materials used to construct prototypes ranged from approximately $1,200 to $1,700. The test data indicate that the basic designs developed in this project, particularly the designs of two of the prototypes, have considerable merit. Further design refinement, testing, and cost analysis would be necessary to fully assess commercial potential. The designs and test results will be communicated to the HVAC manufacturing community.

  2. Group Use and Other Aspects of Programmed Instruction. Final Report.

    Science.gov (United States)

    Crist, Robert L.

    The use of group approval as a social reinforcer and related methods in group presentation of programed instruction were investigated in a series of studies. The efficacy of programed instructional materials is frequently limited by their inability to command and maintain adequate attention and motivation. To consider social reinforcement effects…

  3. Prototypes as Platforms for Participation

    DEFF Research Database (Denmark)

    Horst, Willem

    developers, and design it accordingly. Designing a flexible prototype in combination with supportive tools to be used by both interaction designers and non-designers during development is introduced as a way to open up the prototyping process to these users. Furthermore I demonstrate how such a flexible...... on prototyping, by bringing to attention that the prototype itself is an object of design, with its users and use context, which deserves further attention. Moreover, in this work I present concrete tools and methods that can be used by interaction designers in practice. As such this work addresses both......The development of interactive products in industry is an activity involving different disciplines – such as different kinds of designers, engineers, marketers and managers – in which prototypes play an important role. On the one hand, prototypes can be powerful boundary objects and an effective...

  4. Electrochemically active functionalization of graphene for development of prototype biosensing devices

    DEFF Research Database (Denmark)

    Halder, Arnab; Ulstrup, Jens; Chi, Qijin

    nanosheets, (2) loading of different enzymes on functionalized graphene matrix, and (3) electrochemical performances of the functionalized nanaohybrid materials based prototype sensors. These latest advancements could be crucial for the design and fabrication of low-cost, flexible and disposable biosensors....

  5. The use of active learning strategies in the instruction of Reactor Physics concepts

    International Nuclear Information System (INIS)

    Robinson, Michael A.

    2000-01-01

    Each of the Active Learning strategies employed to teach Reactor Physics material has been or promises to be instructionally successful. The Cooperative Group strategy has demonstrated a statistically significant increase in student performance on the unit exam in teaching conceptually difficult, transport and diffusion theory material. However, this result was achieved at the expense of a modest increase in class time. The Tutorial CBI programs have enabled learning equally as well as classroom lectures without the direct intervention of an instructor. Thus, the Tutorials have been successful as homework assignments, releasing classroom time for other instruction. However, the time required for development of these tools was large, on the order of two hundred hours per hour of instruction. The initial introduction of the Case-Based strategy was roughly as effective as the traditional classroom instruction. Case-Based learning could well, after important modifications, perform better than traditional instruction. A larger percentage of the students prefer active learning strategies than prefer traditional lecture presentations. Student preferences for the active strategies were particularly strong when they believed that the strategies helped them learn the material better than they would have by using a lecture format. In some cases, students also preferred the active strategies because they were different from traditional instruction, a change of pace. Some students preferred lectures to CBI instruction, primarily because the CBI did not afford them the opportunity to question the instructor during the presentation

  6. The use of active learning strategies in the instruction of Reactor Physics concepts

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, Michael A.

    2000-01-01

    Each of the Active Learning strategies employed to teach Reactor Physics material has been or promises to be instructionally successful. The Cooperative Group strategy has demonstrated a statistically significant increase in student performance on the unit exam in teaching conceptually difficult, transport and diffusion theory material. However, this result was achieved at the expense of a modest increase in class time. The Tutorial CBI programs have enabled learning equally as well as classroom lectures without the direct intervention of an instructor. Thus, the Tutorials have been successful as homework assignments, releasing classroom time for other instruction. However, the time required for development of these tools was large, on the order of two hundred hours per hour of instruction. The initial introduction of the Case-Based strategy was roughly as effective as the traditional classroom instruction. Case-Based learning could well, after important modifications, perform better than traditional instruction. A larger percentage of the students prefer active learning strategies than prefer traditional lecture presentations. Student preferences for the active strategies were particularly strong when they believed that the strategies helped them learn the material better than they would have by using a lecture format. In some cases, students also preferred the active strategies because they were different from traditional instruction, a change of pace. Some students preferred lectures to CBI instruction, primarily because the CBI did not afford them the opportunity to question the instructor during the presentation.

  7. A Case Study on the Effects of an L2 Writing Instructional Model for Blended Learning in Higher Education

    Science.gov (United States)

    So, Lee; Lee, Chung Hyun

    2013-01-01

    This case study explores EFL (English as a foreign language) students' perceptions toward a prototype of an instructional model for second language (L2) writing in blended learning and the effects of the model on the development of L2 writing skills in higher education. This model is primarily founded on the process-oriented writing approach…

  8. Semi-automated delineation of breast cancer tumors and subsequent materialization using three-dimensional printing (rapid prototyping).

    Science.gov (United States)

    Schulz-Wendtland, Rüdiger; Harz, Markus; Meier-Meitinger, Martina; Brehm, Barbara; Wacker, Till; Hahn, Horst K; Wagner, Florian; Wittenberg, Thomas; Beckmann, Matthias W; Uder, Michael; Fasching, Peter A; Emons, Julius

    2017-03-01

    Three-dimensional (3D) printing has become widely available, and a few cases of its use in clinical practice have been described. The aim of this study was to explore facilities for the semi-automated delineation of breast cancer tumors and to assess the feasibility of 3D printing of breast cancer tumors. In a case series of five patients, different 3D imaging methods-magnetic resonance imaging (MRI), digital breast tomosynthesis (DBT), and 3D ultrasound-were used to capture 3D data for breast cancer tumors. The volumes of the breast tumors were calculated to assess the comparability of the breast tumor models, and the MRI information was used to render models on a commercially available 3D printer to materialize the tumors. The tumor volumes calculated from the different 3D methods appeared to be comparable. Tumor models with volumes between 325 mm 3 and 7,770 mm 3 were printed and compared with the models rendered from MRI. The materialization of the tumors reflected the computer models of them. 3D printing (rapid prototyping) appears to be feasible. Scenarios for the clinical use of the technology might include presenting the model to the surgeon to provide a better understanding of the tumor's spatial characteristics in the breast, in order to improve decision-making in relation to neoadjuvant chemotherapy or surgical approaches. J. Surg. Oncol. 2017;115:238-242. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  9. Preliminary experimental results from a linear reciprocating magnetic refrigerator prototype

    International Nuclear Information System (INIS)

    Tagliafico, Luca Antonio; Scarpa, Federico; Valsuani, Federico; Tagliafico, Giulio

    2013-01-01

    A linear reciprocating magnetic refrigerator prototype was designed and built with the aid of an industrial partner. The refrigerator is based on the Active Magnetic Regenerative cycle, and exploits two regenerators working in parallel. The active material is Gadolinium in plates, 0.8 mm thick, for a total mass of 0.36 kg. The device is described and results about magnetic field and temperature span measurements are presented. The designed permanent magnet structure, based on an improved cross-type arrangement, generates a maximum magnetic field intensity of 1.55 T in air, over a gap of (13 × 50 × 100) mm 3 . The maximum temperature span achieved is 5.0 K, in a free run condition. -- Highlights: ► We give preliminary results from a linear reciprocating magnetic refrigerator prototype. ► The design is intended to process visualization and investigation. ► The prototype behavior gives us various suggestions to improve its general performance

  10. Application of rapid prototyping technology in the prototype manufacturing for evaluation of NPP components and equipments

    International Nuclear Information System (INIS)

    Park, C. Y.; Kim, J. W.; Shon, H. K.; Choi, H. S.; Yang, D. Y.

    2001-01-01

    A brief overview of rapid prototyping technology in which a part with complex shape can be produced easily and rapidly in a layer-by-layer additive manner is given in this article. In addition, a prototype model of a complex fan is manufactured using three-dimensional solid CAD modeling and Laminated Object Manufacturing (LOM), a rapid prototyping technology. This enables designers to verify and modify design rapidly at an early stage of product development; and the prototype model of a fan can be used as a pattern for various secondary casting process such as vacumm casting, lost-paper casting to make prototypes of a fan. It has been shown that the combination of three-dimensional solid CAD modeling and rapid prototyping technology can reduce greatly the cost and time of prototyping of fans and turbine blades in comparison with conventional CNC machining. It should also be noted that rapid prototyping technology enables the visualization of various physical and chemical defects at a nuclear power plant so that it can help engineers understand those defects in an effective way

  11. Prototype Development and Evaluation of Self-Cleaning Concentrated Solar Power Collectors

    Energy Technology Data Exchange (ETDEWEB)

    Mazumder, Malay K. [Boston Univ., MA (United States); Horenstein, Mark N. [Boston Univ., MA (United States); Joglekar, Nitin R. [Boston Univ., MA (United States)

    2015-03-31

    The feasibility of integrating and retrofitting transparent electrodynamic screens (EDS) on the front surfaces of solar collectors was established as a means to provide active self-cleaning properties for parabolic trough and heliostat reflectors, solar panels, and Fresnel lenses. Prototype EDS-integrated solar collectors, including second-surface glass mirrors, metallized Acrylic-film mirrors, and dielectric mirrors, were produced and tested in environmental test chambers for removing the dust layer deposited on the front surface of the mirrors. The evaluation of the prototype EDS-integrated mirrors was conducted using dust and environmental conditions that simulate the field conditions of the Mojave Desert. Test results showed that the specular reflectivity of the mirrors could be maintained at over 90% over a wide range of dust loadings ranging from 0 to 10 g/m2, with particle diameter varying from 1 to 50 μm. The measurement of specular reflectivity (SR) was performed using a D&S Reflectometer at wavelength 660 nm. A non-contact reflectometer was designed and constructed for rapid measurement of specular reflectivity at the same wavelength. The use of this new noncontact instrument allowed us to measure SR before and after EDS activation. Several EDS prototypes were constructed and evaluated with different electrode configurations, electrode materials, and encapsulating dielectric materials.

  12. Developing android-based science instructional media to improve scientific literacy of junior high school students

    Science.gov (United States)

    Farida, I. I.; Jumadi; Wilujeng; Senam

    2018-04-01

    The aims of this study are: to develop android-based science instructional media and to reveal the characteristic, the quality, and the effectiveness of android-based science instructional media with global warming topic to increase junior high school students’ scientific literacy. This study is a development research. The instructional media were reviewed by a media expert, a material expert, science teachers, peer reviewers, and students. The data was collected using media evaluation questionnaires. The results of the study showed that: (1) the android-based science instructional media has characteristics including interesting visualization, easy to use, flexible, and practical, (2) the android-based science instructional media was appropriate for teaching, in terms of material evaluation aspects, media evaluation aspects, and based on student test results, and (3) the android-based science instructional media can effectively used for teaching.

  13. Metacognitive instruction in middle school science

    Science.gov (United States)

    Bonney, Dianna

    The purpose of this action research project was to determine the extent to which metacognitive instruction affected students' performance in the middle-grade science classroom. Conducted with four seventh grade science classes over a three-month time period, 105 students were engaged in 21 metacognitively enhanced lessons. Both quantitative and qualitative data sources were collected for this study and analyzed according to grounded theory methodology. Quantitative data came from the Jr. Metacognitive Awareness Inventory, administered as a pre-post test. Qualitative teacher-generated data was collected in a metacognitive observation protocol containing observations and reflections while student-generated data was gathered from reflective journal entries, modified rubrics, and checklists. Analysis of the data led to the assertions that metacognitive development occurred over time through systematic and varied implementation of explicit instruction. In addition, students perceived they learned best both when working collaboratively and when making multiple connections with content material. Implications for middle-grade teachers include the need for explicit instruction of metacognitive strategies, providing for instructional variation and student collaboration, and guiding students in making connections to prior learning.

  14. Ceramic Prototypes – Design, Computation, and Digital Fabrication

    Directory of Open Access Journals (Sweden)

    M. Bechthold

    2016-12-01

    Full Text Available Research in ceramic material systems at Harvard University has introduced a range of novel applications which combine digital manufacturing technologies and robotics with imaginative design and engineering methods. Prototypes showcase the new performative qualities of ceramics and the integration of this material in today’s construction culture. Work ranges from daylight control systems to structural applications and a robotic tile placement system. Emphasis is on integrating novel technologies with tried and true manufacturing methods. The paper describes two distinct studies – one on 3D print-ing of ceramics, the other on structural use of large format thin tiles.

  15. A prototype analysis of vengeance

    NARCIS (Netherlands)

    Elshout, Maartje; Nelissen, Rob; van Beest, Ilja

    2015-01-01

    The authors examined the concept of vengeance from a prototype perspective. In 6 studies, the prototype structure of vengeance was mapped. Sixty-nine features of vengeance were identified (Study 1), and rated on centrality (Study 2). Further studies confirmed the prototype structure. Compared to

  16. Advanced insider threat mitigation workshop instructional materials

    Energy Technology Data Exchange (ETDEWEB)

    Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Larsen, Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); O Brien, Mike [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Edmunds, Tom [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2008-11-01

    Insiders represent a formidable threat to nuclear facilities. This set of workshop materials covers methodologies to analyze and approaches to mitigate the threat of an insider attempting abrupt and protracted theft of nuclear materials. This particular set of materials is a n update of a January 2008 version to add increased emphasis on Material Control and Accounting and its role with respect to protracted insider nuclear material theft scenarios.

  17. Long multiplication by instruction sequences with backward jump instructions

    NARCIS (Netherlands)

    Bergstra, J.A.; Middelburg, C.A.

    2013-01-01

    For each function on bit strings, its restriction to bit strings of any given length can be computed by a finite instruction sequence that contains only instructions to set and get the content of Boolean registers, forward jump instructions, and a termination instruction. Backward jump instructions

  18. Peer Instruction Improves Performance on Quizzes.

    Science.gov (United States)

    Rao, Sumangala P.; DiCarlo, Stephen E.

    2000-01-01

    Applies Benson's think-pair-share and Mazur's peer instruction techniques to enhance student involvement during the respiratory component of the medical physiology class. Investigates changes in students' level of understanding and ability to synthesize and integrate material. Includes 15 references. (Author/YDS)

  19. Nanocomposite materials: From lab-scale experiments to prototypes

    NARCIS (Netherlands)

    Dortmans, A.; Batenburg, L.F.; Koster, T.P.M.; Nelissen, R.G.; Fischer, H.

    2002-01-01

    A porous PMMA material has been reinforced by clay particles, and properties of the resulting material were evaluated. The clay has been intercalated in a first step by melt-extrusion with a suitable block copolymer. A radical polymerisation reaction after swelling of the intercalated clay with

  20. Rapid Prototyping and its Application in Dentistry

    Directory of Open Access Journals (Sweden)

    V. N. V. Madhav

    2013-01-01

    Full Text Available Medical implants and biological models have three main characteristics: low volume, complex shape, and can be customized. These characteristics suit very well with Rapid Prototyping (RP and Rapid Manufacturing (RM processes. RP/RM processes are fabricated part layer- by-layer until complete shape finished from 3D model. Biocompatible materials, such as Titanium and Titanium alloy, Zirconium, Cobalt Chromium, PEEK, etc, are used for fabrication process. Reverse Engineering (RE technology greatly affects RP/RM processes. RE is used to capture or scan image of the limb, cranium, tooth, and other biological objects. Three common methods to get the image are 3D laser scanning, Computer Tomography (CT, and Magnetic Resonance Imaging (MRI. Main RP/RM techniques used in Dentistry are Stereotype Lithography Apparatus (SLA, Fused Deposition Modeling (FDM, Selective Laser Sintering (SLS, and ink jet printing. This article reviews the changing scenario of technology in dentistry with special emphasis on Rapid Prototyping and its various applications in Dentistry.

  1. Reflecting Equity and Diversity. Part I: Guidelines and Procedure for Evaluating Bias in Instructional Materials. Part II: Bias Awareness Training Worksheets. Part III: Bias Awareness and Procedure Training Course.

    Science.gov (United States)

    Bebermeyer, Jim; Edmond, Mary, Ed.

    Reflecting a need to prepare students for working in diverse organizations, this document was developed to increase school officials' awareness of bias in instructional materials and help them select bias-free materials. A number of the examples illustrate situations dealing with diversity in the workplace. The guide is divided into three parts:…

  2. Instructional Design Briefing A Brief Overview in Relation to the China COE

    Energy Technology Data Exchange (ETDEWEB)

    Osburn, Laura Ann [Los Alamos National Laboratory; Glasco, Bethany Lynn [Los Alamos National Laboratory

    2016-11-10

    This introduction provides a roadmap and guidance for the work that will be done by SMEs to prepare NDA course material to be transitioned from LANL to the China COE. It will cover the definition of instructional design; why instructional design is important; role of instructional designer vs an instructor and how they work together; and how this relates to our work in the China COE project.

  3. Biointrusion test plan for the Permanent Isolation Surface Barrier Prototype

    International Nuclear Information System (INIS)

    Link, S.O.; Cadwell, L.L.; Brandt, C.A.; Downs, J.L.; Rossi, R.E.; Gee, G.W.

    1994-04-01

    This document provides a testing and monitoring plan for the biological component of the prototype barrier slated for construction at the Hanford Site. The prototype barrier is an aboveground structure engineered to demonstrate the basic features of an earthen cover system. It is designed to permanently isolate waste from the biosphere. The features of the barrier include multiple layers of soil and rock materials and a low-permeability asphalt sublayer. The surface of the barrier consists of silt loam soil, covered with plants. The barrier sides are reinforced with rock or coarse earthen-fill to protect against wind and water erosion. The sublayers inhibit plant and animal intrusion and percolation of water. A series of tests will be conducted on the prototype barrier over the next several years to evaluate barrier performance under extreme climatic conditions. Plants and animals will play a significant role in the hydrologic and water and wind erosion characteristics of the prototype barrier. Studies on the biological component of the prototype barrier will include work on the initial revegetation of the surface, continued monitoring of the developing plant community, rooting depth and dispersion in the context of biointrusion potential, the role of plants in the hydrology of the surface and toe regions of the barrier, the role of plants in stabilizing the surface against water and wind erosion, and the role of burrowing animals in the hydrology and water and wind erosion of the barrier

  4. OTEC riser cable model and prototype testing

    Science.gov (United States)

    Kurt, J. P.; Schultz, J. A.; Roblee, L. H. S.

    1981-12-01

    Two different OTEC riser cables have been developed to span the distance between a floating OTEC power plant and the ocean floor. The major design concerns for a riser cable in the dynamic OTEC environment are fatigue, corrosion, and electrical/mechanical aging of the cable components. The basic properties of the cable materials were studied through tests on model cables and on samples of cable materials. Full-scale prototype cables were manufactured and were tested to measure their electrical and mechanical properties and performance. The full-scale testing was culminated by the electrical/mechanical fatigue test, which exposes full-scale cables to simultaneous tension, bending and electrical loads, all in a natural seawater environment.

  5. What English Language Arts, Math, and Science Instructional Materials Have Districts in the Mid-Atlantic Region States Adopted? Summary. Issues & Answers. REL 2010-No. 096

    Science.gov (United States)

    Burzichelli, Claudia; Morrill, William; Bausmith, Jennifer; Mackey, Philip E.; Magarelli, Christopher

    2010-01-01

    Despite increasing accountability requirements and a national call for transparency in public policy, Mid-Atlantic Region state education agencies indicate that they have little information about what instructional materials districts adopt. This report describes first-year results of an ongoing project to generate and share information on core…

  6. Hobbies and Hobby-Related Reading: Exploring Preferences, Practices, and Instructional Possibilities.

    Science.gov (United States)

    Hoffman, Amy R.; Boraks, Nancy E.; Bauer, David

    2000-01-01

    Considers the relationship between hobbies and hobby-related reading to evaluate a common instructional assumption about using hobbies as a basis for recommending reading. Supports: (1) the potential for recommending authentic, non-traditional hobby-related reading materials in home and instructional settings; and (2) the potential for tapping the…

  7. Mobile prototyping with Axure 7

    CERN Document Server

    Hacker, Will

    2013-01-01

    This book is a step-by-step tutorial which includes hands-on examples and downloadable Axure files to get you started with mobile prototyping immediately. You will learn how to develop an application from scratch, and will be guided through each and every step.If you are a mobile-centric developer/designer, or someone who would like to take their Axure prototyping skills to the next level and start designing and testing mobile prototypes, this book is ideal for you. You should be familiar with prototyping and Axure specifically, before you read this book.

  8. Wireless Augmented Reality Prototype (WARP)

    Science.gov (United States)

    Devereaux, A. S.

    1999-01-01

    Initiated in January, 1997, under NASA's Office of Life and Microgravity Sciences and Applications, the Wireless Augmented Reality Prototype (WARP) is a means to leverage recent advances in communications, displays, imaging sensors, biosensors, voice recognition and microelectronics to develop a hands-free, tetherless system capable of real-time personal display and control of computer system resources. Using WARP, an astronaut may efficiently operate and monitor any computer-controllable activity inside or outside the vehicle or station. The WARP concept is a lightweight, unobtrusive heads-up display with a wireless wearable control unit. Connectivity to the external system is achieved through a high-rate radio link from the WARP personal unit to a base station unit installed into any system PC. The radio link has been specially engineered to operate within the high- interference, high-multipath environment of a space shuttle or space station module. Through this virtual terminal, the astronaut will be able to view and manipulate imagery, text or video, using voice commands to control the terminal operations. WARP's hands-free access to computer-based instruction texts, diagrams and checklists replaces juggling manuals and clipboards, and tetherless computer system access allows free motion throughout a cabin while monitoring and operating equipment.

  9. Prototype-Incorporated Emotional Neural Network.

    Science.gov (United States)

    Oyedotun, Oyebade K; Khashman, Adnan

    2017-08-15

    Artificial neural networks (ANNs) aim to simulate the biological neural activities. Interestingly, many ''engineering'' prospects in ANN have relied on motivations from cognition and psychology studies. So far, two important learning theories that have been subject of active research are the prototype and adaptive learning theories. The learning rules employed for ANNs can be related to adaptive learning theory, where several examples of the different classes in a task are supplied to the network for adjusting internal parameters. Conversely, the prototype-learning theory uses prototypes (representative examples); usually, one prototype per class of the different classes contained in the task. These prototypes are supplied for systematic matching with new examples so that class association can be achieved. In this paper, we propose and implement a novel neural network algorithm based on modifying the emotional neural network (EmNN) model to unify the prototype- and adaptive-learning theories. We refer to our new model as ``prototype-incorporated EmNN''. Furthermore, we apply the proposed model to two real-life challenging tasks, namely, static hand-gesture recognition and face recognition, and compare the result to those obtained using the popular back-propagation neural network (BPNN), emotional BPNN (EmNN), deep networks, an exemplar classification model, and k-nearest neighbor.

  10. Prototype Effect and the Persuasiveness of Generalizations.

    Science.gov (United States)

    Dahlman, Christian; Sarwar, Farhan; Bååth, Rasmus; Wahlberg, Lena; Sikström, Sverker

    An argument that makes use of a generalization activates the prototype for the category used in the generalization. We conducted two experiments that investigated how the activation of the prototype affects the persuasiveness of the argument. The results of the experiments suggest that the features of the prototype overshadow and partly overwrite the actual facts of the case. The case is, to some extent, judged as if it had the features of the prototype instead of the features it actually has. This prototype effect increases the persuasiveness of the argument in situations where the audience finds the judgment more warranted for the prototype than for the actual case (positive prototype effect), but decreases persuasiveness in situations where the audience finds the judgment less warranted for the prototype than for the actual case (negative prototype effect).

  11. Dissemination of CPR video self-instruction materials to secondary trainees: results from a hospital-based CPR education trial

    Science.gov (United States)

    Ikeda, Daniel J.; Buckler, David G.; Li, Jiaqi; Agarwal, Amit K.; Di Taranti, Laura J.; Kurtz, James; dos Reis, Ryan; Leary, Marion; Abella, Benjamin S.; Blewer, Audrey L.

    2016-01-01

    Background Cardiopulmonary resuscitation (CPR) video self-instruction (VSI) materials have been promoted as a scalable approach to increase the prevalence of CPR skills among the lay public, in part due to the opportunity for secondary training (i.e., sharing of training materials). However, the motivations for, and barriers to, disseminating VSI materials to secondary trainees is poorly understood. Methods This work represents an ancillary investigation of a prospective hospital-based CPR education trial in which family members of cardiac patients were trained using VSI. Mixed-methods surveys were administered to primary trainees six months after initial enrollment. Surveys were designed to capture motivations for, and barriers to, sharing VSI materials, the number of secondary trainees with whom materials were shared, and the settings, timing, and recipients of trainings. Results Between 07/2012–05/2015, 653 study participants completed a six-month follow-up interview. Of those, 345 reported sharing VSI materials with 1455 secondary trainees. Materials were shared most commonly with family members. In a logistic regression analysis, participants in the oldest quartile (age > 63 years) were less likely to share materials compared to those in the youngest quartile (age ≤ 44 years, OR 0.58, CI 0.37–0.90, p=0.02). Among the 308 participants who did not share their materials, time constraints was the most commonly cited barrier for not sharing. Conclusions VSI materials represent a strategy for secondary dissemination of CPR training, yet older individuals have a lower likelihood of sharing relative to younger individuals. Further work is warranted to remedy perceived barriers to CPR dissemination among the lay public using VSI approaches. PMID:26776900

  12. Development and Assessment of Planetary Gear Unit for Experimental Prototype of Vertical Axis Wind Turbine

    Directory of Open Access Journals (Sweden)

    Urbahs A.

    2017-10-01

    Full Text Available The theoretical calculation for development of planetary gear unit of wind turbine (WT and its experimental tests are presented in the paper. Development of experimental prototypes from composite materials is essential to determine capability of element and its impact on feature. Two experimental scale prototypes of planetary gear unit for WT were developed for such purposes. Hall transducer, servomechanisms and optical tachometers were used to obtain results, comparison analysis of theoretical and actual data was performed as well as quality assessment of experimental prototypes of planetary gear unit. After kinematic and load analysis as well as control of rotation frequency, it is possible to declare that the unit is able to operate at designated quality. Theoretical calculations and test results obtained are used for industrial WT prototype development.

  13. Development and Assessment of Planetary Gear Unit for Experimental Prototype of Vertical Axis Wind Turbine

    Science.gov (United States)

    Urbahs, A.; Urbaha, M.; Carjova, K.

    2017-10-01

    The theoretical calculation for development of planetary gear unit of wind turbine (WT) and its experimental tests are presented in the paper. Development of experimental prototypes from composite materials is essential to determine capability of element and its impact on feature. Two experimental scale prototypes of planetary gear unit for WT were developed for such purposes. Hall transducer, servomechanisms and optical tachometers were used to obtain results, comparison analysis of theoretical and actual data was performed as well as quality assessment of experimental prototypes of planetary gear unit. After kinematic and load analysis as well as control of rotation frequency, it is possible to declare that the unit is able to operate at designated quality. Theoretical calculations and test results obtained are used for industrial WT prototype development.

  14. Project management strategies for prototyping breakdowns

    DEFF Research Database (Denmark)

    Granlien, Maren Sander; Pries-Heje, Jan; Baskerville, Richard

    2009-01-01

    , managing the explorative and iterative aspects of prototyping projects is not a trivial task. We examine the managerial challenges in a small scale prototyping project in the Danish healthcare sector where a prototype breakdown and project escalation occurs. From this study we derive a framework...... of strategies for coping with escalation in troubled prototyping projects; the framework is based on project management triangle theory and is useful when considering how to manage prototype breakdown and escalation. All strategies were applied in the project case at different points in time. The strategies led...

  15. Applied Physics Modules: Notes, Instructions, Data Sheets, Tests, and Test Answer Keys.

    Science.gov (United States)

    Southeast Community Coll., Lincoln, NE.

    These user instructions and related materials are designed to accompany a series of twenty-three applied physics modules which have been developed for postsecondary students in electrical, electronics, machine tool, metals, manufacturing, automotive, diesel, architecture, and civil drafting occupational programs. The instructions include an…

  16. Specifications in software prototyping

    OpenAIRE

    Luqi; Chang, Carl K.; Zhu, Hong

    1998-01-01

    We explore the use of software speci®cations for software prototyping. This paper describes a process model for software prototyping, and shows how specifications can be used to support such a process via a cellular mobile phone switch example.

  17. Courthouse Prototype Building

    Energy Technology Data Exchange (ETDEWEB)

    Malhotra, Mini [ORNL; New, Joshua Ryan [ORNL; Im, Piljae [ORNL

    2018-02-01

    As part of DOE's support of ANSI/ASHRAE/IES Standard 90.1 and IECC, researchers at Pacific Northwest National Laboratory (PNNL) apply a suite of prototype buildings covering 80% of the commercial building floor area in the U.S. for new construction. Efforts have started on expanding the prototype building suite to cover 90% of the commercial building floor area in the U.S., by developing prototype models for additional building types including place of worship, public order and safety, public assembly. Courthouse is courthouse is a sub-category under the “Public Order and Safety" building type category; other sub-categories include police station, fire station, and jail, reformatory or penitentiary.ORNL used building design guides, databases, and documented courthouse projects, supplemented by personal communication with courthouse facility planning and design experts, to systematically conduct research on the courthouse building and system characteristics. This report documents the research conducted for the courthouse building type and proposes building and system characteristics for developing a prototype building energy model to be included in the Commercial Building Prototype Model suite. According to the 2012 CBECS, courthouses occupy a total of 436 million sqft of floor space or 0.5% of the total floor space in all commercial buildings in the US, next to fast food (0.35%), grocery store or food market (0.88%), and restaurant or cafeteria (1.2%) building types currently included in the Commercial Prototype Building Model suite. Considering aggregated average, courthouse falls among the larger with a mean floor area of 69,400 sqft smaller fuel consumption intensity building types and an average of 94.7 kBtu/sqft compared to 77.8 kBtu/sqft for office and 80 kBtu/sqft for all commercial buildings.Courthouses range in size from 1000 sqft to over a million square foot building gross square feet and 1 courtroom to over 100 courtrooms. Small courthouses

  18. Design and construction of a prototype for the obtention of 32 P

    International Nuclear Information System (INIS)

    Alanis M, J.

    2003-12-01

    In the National Institute of Nuclear Research (ININ) it was designed, built and proved a prototype to obtain 32 P in form of H 3 32 PO 4 , starting from irradiated Sα. The beginning of the prototype it is based on a distillation system in dry of the Sα in nitrogen atmosphere, and in the formation of the ion 32 PO 4 3- in acid solution. Due to the handling of radioactive material during the process, the prototype is inside a hot cell and it has a cylindrical oven that opens up lengthwise to the half, with controller of temperature and with a system of empty air for to transport reagents and products. The air-vacuum system is provided of filters and traps. The tests showed a recovery from 14 to 15% of the activity obtained during the irradiation. (Author)

  19. EBR-2 [Experimental Breeder Reactor-2], IFR [Integral Fast Reactor] prototype testing programs

    International Nuclear Information System (INIS)

    Lehto, W.K.; Sackett, J.I.; Lindsay, R.W.; Planchon, H.P.; Lambert, J.D.B.

    1990-01-01

    The Experimental Breeder Reactor-2 (EBR-2) is a sodium cooled power reactor supplying about 20 MWe to the Idaho National Engineering Laboratory (INEL) grid and, in addition, is the key component in the development of the Integral Fast Reactor (IFR). EBR-2's testing capability is extensive and has seen four major phases: (1) demonstration of LMFBR power plant feasibility, (2) irradiation testing for fuel and material development. (3) testing the off-normal performance of fuel and plant systems and (4) operation as the IFR prototype, developing and demonstrating the IFR technology associated with fuel and plant design. Specific programs being carried out in support of the IFR include advanced fuels and materials development and component testing. This paper discusses EBR-2 as the IFR prototype and the associated testing programs. 29 refs

  20. Implicit face prototype learning from geometric information.

    Science.gov (United States)

    Or, Charles C-F; Wilson, Hugh R

    2013-04-19

    There is evidence that humans implicitly learn an average or prototype of previously studied faces, as the unseen face prototype is falsely recognized as having been learned (Solso & McCarthy, 1981). Here we investigated the extent and nature of face prototype formation where observers' memory was tested after they studied synthetic faces defined purely in geometric terms in a multidimensional face space. We found a strong prototype effect: The basic results showed that the unseen prototype averaged from the studied faces was falsely identified as learned at a rate of 86.3%, whereas individual studied faces were identified correctly 66.3% of the time and the distractors were incorrectly identified as having been learned only 32.4% of the time. This prototype learning lasted at least 1 week. Face prototype learning occurred even when the studied faces were further from the unseen prototype than the median variation in the population. Prototype memory formation was evident in addition to memory formation of studied face exemplars as demonstrated in our models. Additional studies showed that the prototype effect can be generalized across viewpoints, and head shape and internal features separately contribute to prototype formation. Thus, implicit face prototype extraction in a multidimensional space is a very general aspect of geometric face learning. Copyright © 2013 Elsevier Ltd. All rights reserved.

  1. Novice designers’ use of prototypes in engineering design

    Science.gov (United States)

    Deininger, Michael; Daly, Shanna R.; Sienko, Kathleen H.; Lee, Jennifer C.

    2017-01-01

    Prototypes are essential tools in product design processes, but are often underutilized by novice designers. To help novice designers use prototypes more effectively, we must first determine how they currently use prototypes. In this paper, we describe how novice designers conceptualized prototypes and reported using them throughout a design project, and compare reported prototyping use to prototyping best practices. We found that some of the reported prototyping practices by novice designers, such as using inexpensive prototypes early and using prototypes to define user requirements, occurred infrequently and lacked intentionality. Participants’ initial descriptions of prototypes were less sophisticated than how they later described using them and only upon prompted reflection did participants recognize more specific benefits of using prototypes. PMID:29398740

  2. A room-temperature liquid calorimeter prototype for the SSC

    International Nuclear Information System (INIS)

    Brandenburg, G.W.; Geer, S.H.; Oliver, J.; Sadowski, E.; Theriot, D.

    1990-01-01

    Calorimeters will be an extremely important part of SSC detectors as they have been in existing collider detectors. The main issues that need to be addressed are: (1) energy resolution of jets and electrons, (2) segmentation, (3) hermiticity, (4) response time, and (5) radiation resistance. An attractive possibility on all these counts is the use of room-temperature liquids together with uranium, as pioneered by UA1. The authors are planning a prototype calorimeter which consists of a sealed vessel containing both the radiator plates and the readout pads. This geometry has been appropriately named the swimming pool design. The general mechanical starting point is similar to the SLD liquid argon calorimeters. The points they wish to address are the following: (1) Simple and reliable modular construction techniques, (2) Satisfactory electrical connections with minimal geometric impact, (3) The necessity of isolating radiator plates and liquid to maintain purity, (4) What materials can be immersed without compromising the liquid purity. The design and construction of the swimming pool electromagnetic calorimeter prototype is being carried out at the Harvard High Energy Physics Laboratory. This is one of the first attempts to build a full-scale prototype of such a design

  3. Prototyping of user interfaces for mobile applications

    CERN Document Server

    Bähr, Benjamin

    2017-01-01

    This book investigates processes for the prototyping of user interfaces for mobile apps, and describes the development of new concepts and tools that can improve the prototype driven app development in the early stages. It presents the development and evaluation of a new requirements catalogue for prototyping mobile app tools that identifies the most important criteria such tools should meet at different prototype-development stages. This catalogue is not just a good point of orientation for designing new prototyping approaches, but also provides a set of metrics for a comparing the performance of alternative prototyping tools. In addition, the book discusses the development of Blended Prototyping, a new approach for prototyping user interfaces for mobile applications in the early and middle development stages, and presents the results of an evaluation of its performance, showing that it provides a tool for teamwork-oriented, creative prototyping of mobile apps in the early design stages.

  4. Imaging of high-Z material for nuclear contraband detection with a minimal prototype of a muon tomography station based on GEM detectors

    Energy Technology Data Exchange (ETDEWEB)

    Gnanvo, Kondo, E-mail: kgnanvo@fit.edu [Department of Physics and Space Sciences, Florida Institute of Technology, Melbourne, FL 32901 (United States); Grasso, Leonard V.; Hohlmann, Marcus; Locke, Judson B.; Quintero, Amilkar [Department of Physics and Space Sciences, Florida Institute of Technology, Melbourne, FL 32901 (United States); Mitra, Debasis [Department of Computer Sciences, Florida Institute of Technology, Melbourne, FL 32901 (United States)

    2011-10-01

    Muon Tomography based on the measurement of multiple scattering of atmospheric cosmic ray muons in matter is a promising technique for detecting heavily shielded high-Z radioactive materials (U, Pu) in cargo or vehicles. The technique uses the deflection of cosmic ray muons in matter to perform tomographic imaging of high-Z material inside a probed volume. A Muon Tomography Station (MTS) requires position-sensitive detectors with high spatial resolution for optimal tracking of incoming and outgoing cosmic ray muons. Micro Pattern Gaseous Detector (MPGD) technologies such as Gas Electron Multiplier (GEM) detectors are excellent candidates for this application. We have built and operated a minimal MTS prototype based on 30 cmx30 cm GEM detectors for probing targets with various Z values inside the MTS volume. We report the first successful detection and imaging of medium-Z and high-Z targets of small volumes ({approx}0.03 L) using GEM-based Muon Tomography.

  5. Imaging of high-Z material for nuclear contraband detection with a minimal prototype of a muon tomography station based on GEM detectors

    International Nuclear Information System (INIS)

    Gnanvo, Kondo; Grasso, Leonard V.; Hohlmann, Marcus; Locke, Judson B.; Quintero, Amilkar; Mitra, Debasis

    2011-01-01

    Muon Tomography based on the measurement of multiple scattering of atmospheric cosmic ray muons in matter is a promising technique for detecting heavily shielded high-Z radioactive materials (U, Pu) in cargo or vehicles. The technique uses the deflection of cosmic ray muons in matter to perform tomographic imaging of high-Z material inside a probed volume. A Muon Tomography Station (MTS) requires position-sensitive detectors with high spatial resolution for optimal tracking of incoming and outgoing cosmic ray muons. Micro Pattern Gaseous Detector (MPGD) technologies such as Gas Electron Multiplier (GEM) detectors are excellent candidates for this application. We have built and operated a minimal MTS prototype based on 30 cmx30 cm GEM detectors for probing targets with various Z values inside the MTS volume. We report the first successful detection and imaging of medium-Z and high-Z targets of small volumes (∼0.03 L) using GEM-based Muon Tomography.

  6. Factors Associated with Technology Integration to Improve Instructional Abilities: A Path Model

    Science.gov (United States)

    Uslu, Öner

    2018-01-01

    Today, students are expected to access, analyse and synthesise information, and work cooperatively. Their learning environment, therefore, should be equipped with appropriate tools and materials, and teachers should have instructional abilities to use them effectively. This study aims to propose a model to improve teachers' instructional abilities…

  7. Fairchild Stratos Division's Type II prototype lockhopper valve: METC Prototype Test Valve No. F-1 prototype lockhopper valve-testing and development project. Static test report

    Energy Technology Data Exchange (ETDEWEB)

    Goff, D. R.; Cutright, R. L.; Griffith, R. A.; Loomis, R. B.; Maxfield, D. A.; Moritz, R. S.

    1981-10-01

    METC Prototype Test Valve No. F-1 is a hybrid design, based on a segmented ball termed a visor valve, developed and manufactured by Fairchild Stratos Division under contract to the Department of Energy. The valve uses a visor arm that rotates into position and then translates to seal. This valve conditionally completed static testing at METC with clean gas to pressures of 1600 psig and internal valve temperatures to 600/sup 0/F. External leakage was excessive due to leakage through the stuffing box, purge fittings, external bolts, and other assemblies. The stuffing box was repacked several times and redesigned midway through the testing, but external leakage was still excessive. Internal leakage through the seats, except for a few anomalies, was very low throughout the 2409 cycles of testing. As shown by the low internal leakage, the visor valve concept appears to have potential for lock-hopper valve applications. The problems that are present with METC Prototype Test Valve No. F-1 are in the seals, which are equivalent to the shaft and bonnet seals in standard valve designs. The operating conditions at these seals are well within the capabilities of available seal designs and materials. Further engineering and minor modifications should be able to resolve the problems identified during static testing.

  8. Using Interactive Video Instruction To Enhance Public Speaking Instruction.

    Science.gov (United States)

    Cronin, Michael W.; Kennan, William R.

    Noting that interactive video instruction (IVI) should not and cannot replace classroom instruction, this paper offers an introduction to interactive video instruction as an innovative technology that can be used to expand pedagogical opportunities in public speaking instruction. The paper: (1) defines the distinctive features of IVI; (2) assesses…

  9. Differentiated instruction: perceptions, practices and challenges of ...

    African Journals Online (AJOL)

    Differentiated instruction: perceptions, practices and challenges of primary school teachers. ... Different factors like knowledge and experience, commitment and motivation, availability of materials/resources, availability of time, class size, range of diversity in classroom, leadership and parental support and staff collaboration ...

  10. EUCLID ARCHIVE SYSTEM PROTOTYPE

    NARCIS (Netherlands)

    Belikov, Andrey; Williams, Owen; Droge, Bob; Tsyganov, Andrey; Boxhoorn, Danny; McFarland, John; Verdoes Kleijn, Gijs; Valentijn, E; Altieri, Bruno; Dabin, Christophe; Pasian, F.; Osuna, Pedro; Soille, P.; Marchetti, P.G.

    2014-01-01

    The Euclid Archive System prototype is a functional information system which is used to address the numerous challenges in the development of fully functional data processing system for Euclid. The prototype must support the highly distributed nature of the Euclid Science Ground System, with Science

  11. PRMS Data Warehousing Prototype

    Science.gov (United States)

    Guruvadoo, Eranna K.

    2002-01-01

    Project and Resource Management System (PRMS) is a web-based, mid-level management tool developed at KSC to provide a unified enterprise framework for Project and Mission management. The addition of a data warehouse as a strategic component to the PRMS is investigated through the analysis, design and implementation processes of a data warehouse prototype. As a proof of concept, a demonstration of the prototype with its OLAP's technology for multidimensional data analysis is made. The results of the data analysis and the design constraints are discussed. The prototype can be used to motivate interest and support for an operational data warehouse.

  12. Manufacturing Implant Supported Auricular Prostheses by Rapid Prototyping Techniques

    OpenAIRE

    Karatas, Meltem Ozdemir; Cifter, Ebru Demet; Ozenen, Didem Ozdemir; Balik, Ali; Tuncer, Erman Bulent

    2011-01-01

    Maxillofacial prostheses are usually fabricated on the models obtained following the impression procedures. Disadvantages of conventional impression techniques used in production of facial prosthesis are deformation of soft tissues caused by impression material and disturbance of the patient due to. Additionally production of prosthesis by conventional methods takes longer time. Recently, rapid prototyping techniques have been developed for extraoral prosthesis in order to reduce these disadv...

  13. Mechanical properties used for the qualification of transport casks: Prototype development and extension to serial production

    International Nuclear Information System (INIS)

    Salzbrenner, R.; Crenshaw, T.B.; Sorenson, K.B.

    1992-01-01

    A thorough understanding of the mechanical behavior of material in a specific cask is required to properly analyze the structural response of the cask. An appropriate way to establish this understanding is through laboratory testing of cask material. The laboratory testing that was done to support the MOSAIK Drop Test Program is summarized as an example of how mechanical properties can be mapped for a prototype cask. The broad range of measured properties allows the critical aspects of mechanical behavior to be understood. This is necessary for the proper application of fracture mechanics, and focuses on fracture toughness as the inherent materials property which quantifies the fracture resistance of a material. The general fracture mechanics approach and its application to specific cask designs are described elsewhere (Salzbrenner et al. 1990, Sorenson et al. 1992a, Sorenson et al. 1992b). The understanding established by a thorough mapping of the mechanical properties is necessary to apply fracture mechanics to a particular prototype, but it is not sufficient for qualifying serially produced casks. The mechanical behavior of a prototype must be correctly associated with parameters which can be measured on production casks. Since the production casks cannot be destructively tested, measurements are commonly made on sub-size specimens. This may prevent direct measurement of valid design properties. An additional database may then be required to establish the correlation between sub-size specimen measurements and valid design properties. This is illustrated by outlining the additional testing which would be necessary to allow the successful verification of the MOSAIK Drop Test Program to be extended from the prototype to serially produced casks

  14. Characterisation of pixel sensor prototypes for the ALICE ITS upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Reidt, Felix [CERN (Switzerland); Physikalisches Institut, Universitaet Heidelberg (Germany); Collaboration: ALICE-Collaboration

    2014-07-01

    ALICE is preparing a major upgrade of its experimental apparatus to be installed in the second long LHC shutdown (LS2) in the years 2018-2019. A key element of the upgrade is the replacement of the Inner Tracking System (ITS) deploying Monolithic Active Pixel Sensors (MAPS). The upgraded ITS will have a reduced material budget while increasing the pixel density and readout rate capabilities. The novel design leads to higher pointing and momentum resolution as well as a p{sub T} acceptance extended to lower values. The corresponding sensor prototypes were qualified in laboratory measurements and beam tests with respect to their radiation tolerance and detection efficiency. This talk summarises recent results on the characterisation of prototypes belonging to the ALPIDE family.

  15. Designing and testing prototypes

    NARCIS (Netherlands)

    Vereijken, P.; Wijnands, F.; Stol, W.

    1995-01-01

    This second progress report focuses on designing a theoretical prototype by linking parameters to methods and designing the methods in this context until they are ready for initial testing. The report focuses also on testing and improving the prototype in general and the methods in particular until

  16. Instructional Experiment of Practical Competencies-Oriented Teaching Materials in Technical Universities

    Science.gov (United States)

    Chen, Su-Chang

    2010-01-01

    This study aims to conduct experimental instruction on the human resource management unit of business management in practical competencies-oriented business program developed by Chen (2005). This study is based on the quasi-experiment method and the subjects are two classes of students in a four-year technical university who have completed the…

  17. The Use of Theatrical Skits in Instructional Television Lectures: A Comparative Study.

    Science.gov (United States)

    Koontz, F. R.; And Others

    This study describes the development of an innovative instructional technique, peculiar to television, that presents information in a dramatic form through televised skits. Primary concerns of the project were the measurement of student attitudes toward receiving instructional television material in skit form, the measurement of the amount of…

  18. Creating Data and Modeling Enabled Hydrology Instruction Using Collaborative Approach

    Science.gov (United States)

    Merwade, V.; Rajib, A.; Ruddell, B. L.; Fox, S.

    2017-12-01

    Hydrology instruction typically involves teaching of the hydrologic cycle and the processes associated with it such as precipitation, evapotranspiration, infiltration, runoff generation and hydrograph analysis. With the availability of observed and remotely sensed data related to many hydrologic fluxes, there is an opportunity to use these data for place based learning in hydrology classrooms. However, it is not always easy and possible for an instructor to complement an existing hydrology course with new material that requires both the time and technical expertise, which the instructor may not have. The work presented here describes an effort where students create the data and modeling driven instruction material as a part of their class assignment for a hydrology course at Purdue University. The data driven hydrology education project within Science Education Resources Center (SERC) is used as a platform to publish and share the instruction material so it can be used by future students in the same course or any other course anywhere in the world. Students in the class were divided into groups, and each group was assigned a topic such as precipitation, evapotranspiration, streamflow, flow duration curve and frequency analysis. Each student in the group was then asked to get data and do some analysis for an area with specific landuse characteristic such as urban, rural and agricultural. The student contribution were then organized into learning units such that someone can do a flow duration curve analysis or flood frequency analysis to see how it changes for rural area versus urban area. The hydrology education project within SERC cyberinfrastructure enables any other instructor to adopt this material as is or through modification to suit his/her place based instruction needs.

  19. Prototypes in engineering design: Definitions and strategies

    DEFF Research Database (Denmark)

    Jensen, Lasse Skovgaard; Özkil, Ali Gürcan; Mortensen, Niels Henrik

    2016-01-01

    By reviewing literature, we investigate types, purposes and definitions of prototypes. There is no overarching definition of a prototype, but we identify five categories of prototypes in litterature. We further synthesize and reference previous work to create an overview of aspects in prototyping...

  20. New Strategies for Powder Compaction in Powder-based Rapid Prototyping Techniques

    NARCIS (Netherlands)

    Budding, A.; Vaneker, Thomas H.J.

    2013-01-01

    In powder-based rapid prototyping techniques, powder compaction is used to create thin layers of fine powder that are locally bonded. By stacking these layers of locally bonded material, an object is made. The compaction of thin layers of powder mater ials is of interest for a wide range of

  1. Development and experimental results from a 1 kW prototype AMR

    DEFF Research Database (Denmark)

    Bahl, Christian R.H.; Engelbrecht, Kurt; Eriksen, Dan

    2014-01-01

    containing an active magnetic regenerator (AMR) bed. The prototype design facilitates easy exchange of the 24 cassettes, allowing the testing of different material amounts and compositions. Operating with 2.8 kg of commercial grade Gd spheres a maximum no-span cooling power of 1010 W and a maximum zero load...

  2. Attribute measurement systems prototypes and equipment in the United States

    International Nuclear Information System (INIS)

    Langner, D.C.; Landry, R.P.; Hsue, S.-T.; MacArthur, D.W.; Mayo, D.R.; Smith, M.K.; Nicholas, N.J.; Whiteson, R.

    2001-01-01

    Since the fall of 1997, the United States has been developing prototypical attribute verification technology for potential use by the International Atomic Energy Agency (IAEA) under the Trilateral Initiative. The first attribute measurement equipment demonstration took place in December 1997 at the Lawrence Livermore National Laboratory. This demonstration led to a series of joint Russian Federatioin/US/IAEA technical discussions that focused on attribute measurement technology that could be applied to plutonium bearing items having classified characteristics. A first prototype attribute verification system with an information barrier was demonstrated at a Trilateral Technical Workshop in June 1999 at Los Alamos. This prototype nourished further fruitful discussions between the three parties that has in turn led to the documents discussed in a previous paper. Prototype development has continued in the US, under other initiatives, using an integrated approach that includes the Trilatleral Initiative. Specifically for the Trilateral Initiative, US development has turned to some peripheral equipment that would support verifications by the IAEA. This equipment includes an authentication tool for measurement systems with information barriers and in situ probes that would facilitate inspections by reducing the need to move material out of storage locations for reverification. In this paper, we will first summarize the development of attribute verification measurement system technology in the US and then report on the status of the development of other equipment to support the Trilateral Initiative.

  3. Multimodal instruction and persuasion in disclosing greenwashing discourses

    DEFF Research Database (Denmark)

    Maier, Carmen Daniela

    and accompanied by new voice-over commentaries and new visual material. The new voice-over narrator instructs the viewers how to identify and decode the multimodal persuasive strategies employed in the original discourse. Simultaneously, the viewers are also persuaded to accept the new understanding...... and social actions when the commercials' greenwashing discourse is used for other instructive and persuasive purposes. When mapping and explaining these transformations, the analysis is based on the investigation of the multifunctional interplay of semiotic modes as language and images. On the basis...

  4. Direct Problem-Based Learning (DPBL): A Framework for Integrating Direct Instruction and Problem-Based Learning Approach

    Science.gov (United States)

    Winarno, Sri; Muthu, Kalaiarasi Sonai; Ling, Lew Sook

    2018-01-01

    Direct instruction approach has been widely used in higher education. Many studies revealed that direct instruction improved students' knowledge. The characteristics of direct instruction include the subject delivered through face-to-face interaction with the lecturers and materials that sequenced deliberately and taught explicitly. However,…

  5. Prototype moving-ring reactor

    International Nuclear Information System (INIS)

    Smith, A.C. Jr.; Ashworth, C.P.; Abreu, K.E.

    1981-01-01

    The objective of this work was to design a prototype fusion reactor based on fusion plasmas confined as ''Compact Toruses.' Six major criteria guided the prototype design. The prototype must: (1) produce net electricity decisively (P/sub net/ >70% of P/sub gross/), with P/sub net/ approximately 100 MW(e); (2) have small physical size (low project cost) but commercial plant; (3) have all features required of commerical plants; (4) avoid unreasonable extrapolation of technology; (5) minimize nuclear issues substantially, i.e. accident and waste issues of public concern, and (6) be modular (to permit repetitive fabrication of parts) and be maintainable with low occupational radiological exposures

  6. Development of a prototype thermoelectric space cooling system using phase change material to improve the performance

    Science.gov (United States)

    Zhao, Dongliang

    The thermoelectric cooling system has advantages over conventional vapor compression cooling devices, including compact in size, light in weight, high reliability, no mechanical moving parts, no refrigerant, being powered by direct current, and easily switching between cooling and heating modes. However, it has been long suffering from its relatively high cost and low energy efficiency, which has restricted its usage to niche applications, such as space missions, portable cooling devices, scientific and medical equipment, where coefficient of performance (COP) is not as important as reliability, energy availability, and quiet operation environment. Enhancement of thermoelectric cooling system performance generally relies on two methods: improving thermoelectric material efficiency and through thermoelectric cooling system thermal design. This research has been focused on the latter one. A prototype thermoelectric cooling system integrated with phase change material (PCM) thermal energy storage unit for space cooling has been developed. The PCM thermal storage unit used for cold storage at night, functions as the thermoelectric cooling system's heat sink during daytime's cooling period and provides relatively lower hot side temperature for the thermoelectric cooling system. The experimental test of the prototype system in a reduced-scale chamber has realized an average cooling COP of 0.87, with the maximum value of 1.22. Another comparison test for efficacy of PCM thermal storage unit shows that 35.3% electrical energy has been saved from using PCM for the thermoelectric cooling system. In general, PCM faces difficulty of poor thermal conductivity at both solid and liquid phases. This system implemented a finned inner tube to increase heat transfer during PCM charging (melting) process that directly impacts thermoelectric system's performance. A simulation tool for the entire system has been developed including mathematical models for a single thermoelectric module

  7. Rapid Prototyping of an Electrically-Small Antenna for Binaural-Hearing Instruments

    DEFF Research Database (Denmark)

    Ruaro, Andrea; Thaysen, Jesper; Jakobsen, Kaj Bjarne

    2015-01-01

    Rapid prototyping is emerging as a technology that can provide detailed mechanical parts, e.g., for use in antenna mock-ups, in a short lead time. Nevertheless, one of the main issues associated with it is that the materials suitable for 3D printing are not characterized at radio frequencies (RF......). This study analyzes the main RF parameters (dielectric constant, loss tangent, surface roughness) and applies the results to the modeling of the prototype of an electrically small (ESA) antenna for binaural hearing instruments applications. After discussing the specific technology choices...... and their relevancies, it is shown how the analyzed parameters can be used to obtain good correlation between simulations and measurements....

  8. Instruction to Help Young Children Develop Language and Literacy Skills: The Roles of Program Design and Instructional Guidance

    Science.gov (United States)

    Gunn, Barbara; Vadasy, Patricia; Smolkowski, Keith

    2011-01-01

    This article discusses the kinds of instructional activities that young children need to develop basic language and literacy skills based on recent research and program evaluations. This includes approaches to develop alphabetic understanding, phonological awareness, vocabulary, and oral language. Activities and materials from the Pre-kindergarten…

  9. Instructional Media: Comunication Skills. Advisory List.

    Science.gov (United States)

    North Carolina State Dept. of Public Instruction, Raleigh. Media and Technology Services.

    This annotated bibliography of instructional media in communication skills presents annotations of 112 books and videotapes for students in grades from pre-kindergarten through grade 12, and of 38 books and videos for teachers. The material in the bibliography for students consists mostly of poetry collections published in 1990 and 1991. The…

  10. Printing and Prototyping of Tissues and Scaffolds

    Science.gov (United States)

    Derby, Brian

    2012-11-01

    New manufacturing technologies under the banner of rapid prototyping enable the fabrication of structures close in architecture to biological tissue. In their simplest form, these technologies allow the manufacture of scaffolds upon which cells can grow for later implantation into the body. A more exciting prospect is the printing and patterning in three dimensions of all the components that make up a tissue (cells and matrix materials) to generate structures analogous to tissues; this has been termed bioprinting. Such techniques have opened new areas of research in tissue engineering and regenerative medicine.

  11. Computer assisted instruction in the general chemistry laboratory

    Science.gov (United States)

    Pate, Jerry C.

    This dissertation examines current applications concerning the use of computer technology to enhance instruction in the general chemistry laboratory. The dissertation critiques widely-used educational software, and explores examples of multimedia presentations such as those used in beginning chemistry laboratory courses at undergraduate and community colleges. The dissertation describes a prototype compact disc (CD) used to (a) introduce the general chemistry laboratory, (b) familiarize students with using chemistry laboratory equipment, (c) introduce laboratory safety practices, and (d) provide approved techniques for maintaining a laboratory notebook. Upon completing the CD portion of the pre-lab, students are linked to individual self-help (WebCT) quizzes covering the information provided on the CD. The CD is designed to improve student understanding of basic concepts, techniques, and procedures used in the general chemistry laboratory.

  12. Effectiveness of the use of question-driven levels of inquiry based instruction (QD-LOIBI) assisted visual multimedia supported teaching material on enhancing scientific explanation ability senior high school students

    Science.gov (United States)

    Suhandi, A.; Muslim; Samsudin, A.; Hermita, N.; Supriyatman

    2018-05-01

    In this study, the effectiveness of the use of Question-Driven Levels of Inquiry Based Instruction (QD-LOIBI) assisted visual multimedia supported teaching materials on enhancing senior high school students scientific explanation ability has been studied. QD-LOIBI was designed by following five-levels of inquiry proposed by Wenning. Visual multimedia used in teaching materials included image (photo), virtual simulation and video phenomena. QD-LOIBI assisted teaching materials supported by visual multimedia were tried out on senior high school students at one high school in one district in West Java. A quasi-experiment method with design one experiment group (n = 31) and one control group (n = 32) were used. Experimental group were given QD-LOIBI assisted teaching material supported by visual multimedia, whereas the control group were given QD-LOIBI assisted teaching materials not supported visual multimedia. Data on the ability of scientific explanation in both groups were collected by scientific explanation ability test in essay form concerning kinetic gas theory concept. The results showed that the number of students in the experimental class that has increased the category and quality of scientific explanation is greater than in the control class. These results indicate that the use of multimedia supported instructional materials developed for implementation of QD-LOIBI can improve students’ ability to provide explanations supported by scientific evidence gained from practicum activities and applicable concepts, laws, principles or theories.

  13. A hydrophone prototype for ultra high energy neutrino acoustic detection

    International Nuclear Information System (INIS)

    Cotrufo, A.; Plotnikov, A.; Yershova, O.; Anghinolfi, M.; Piombo, D.

    2009-01-01

    The design of an air-backed fiber-optic hydrophone is presented. With respect to the previous models this prototype is optimized to provide a bandwidth sufficiently large to detect acoustic signals produced by high energy hadronic showers in water. In addiction to the geometrical configuration and to the choice of the materials, the preliminary results of the measured performances in air are presented.

  14. A hydrophone prototype for ultra high energy neutrino acoustic detection

    Energy Technology Data Exchange (ETDEWEB)

    Cotrufo, A. [University of Genoa, Department of Physics, Via Dodecaneso 33, I-16146 (Italy)], E-mail: cotrufo@ge.infn.it; Plotnikov, A.; Yershova, O. [GSI Helmholtz Centre for Heavy Ion Research, GmbH Planckstrasse1, 64291 Darmstadt (Germany); Anghinolfi, M.; Piombo, D. [INFN, University of Genoa, Department of Physics, Via Dodecaneso 33, I-16146 (Italy)

    2009-06-01

    The design of an air-backed fiber-optic hydrophone is presented. With respect to the previous models this prototype is optimized to provide a bandwidth sufficiently large to detect acoustic signals produced by high energy hadronic showers in water. In addiction to the geometrical configuration and to the choice of the materials, the preliminary results of the measured performances in air are presented.

  15. Towards an Operational Framework for Architectural Prototyping

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak

    2005-01-01

    We use a case study in architectural prototyping as input for presenting a first, tentative, framework describing key concepts and their relationships in architectural prototyping processes.......We use a case study in architectural prototyping as input for presenting a first, tentative, framework describing key concepts and their relationships in architectural prototyping processes....

  16. Evaluation of a prototype infrasound system

    International Nuclear Information System (INIS)

    Whitaker, R.; Sandoval, T.; Breding, D.; Kromer, D.

    1997-01-01

    Under Department of Energy sponsorship, Sandia National Laboratories and Los Alamos National Laboratory cooperated to develop a prototype infrasonic array, with associated documentation, that could be used as part of the International Monitoring System. The United States Government or foreign countries could procure commercially available systems based on this prototype to fulfill their Comprehensive Test Ban Treaty (CTBT) obligations. The prototype is a four-element array in a triangular layout as recommended in CD/NTB/WP.224 with an element at each corner and one in the center. The prototype test configuration utilize an array spacing of 1 km. The prototype infrasound system has the following objectives: (1) Provide a prototype that reliably acquires and transmits near real-time infrasonic data to facilitate the rapid location and identification of atmospheric events. (2) Provide documentation that could be used by the United States and foreign countries to procure infrasound systems commercially to fulfill their CTBT responsibilities. Infrasonic monitoring is an effective, low cost technology for detecting atmospheric explosions. The low frequency components of explosion signals propagate to long ranges (few thousand kilometers) where they can be detected with an array of sensors. Los Alamos National Laboratory's expertise in infrasound systems and phenomenology when combined with Sandia's expertise in providing verification quality system for treaty monitoring make an excellent team to provide the prototype infrasound sensor system. By September 1997, the prototype infrasound system will have been procured, integrated, evaluated and documented. Final documentation will include a system requirements document, an evaluation report and a hardware design document. The hardware design document will describe the various hardware components used in the infrasound prototype and their interrelationships

  17. EUSO-TA prototype telescope

    Energy Technology Data Exchange (ETDEWEB)

    Bisconti, Francesca, E-mail: francesca.bisconti@kit.edu

    2016-07-11

    EUSO-TA is one of the prototypes developed for the JEM-EUSO project, a space-based large field-of-view telescope to observe the fluorescence light emitted by cosmic ray air showers in the atmosphere. EUSO-TA is a ground-based prototype located at the Telescope Array (TA) site in Utah, USA, where an Electron Light Source and a Central Laser Facility are installed. The purpose of the EUSO-TA project is to calibrate the prototype with the TA fluorescence detector in presence of well-known light sources and cosmic ray air showers. In 2015, the detector started the first measurements and tests using the mentioned light sources have been performed successfully. A first cosmic ray candidate has been observed, as well as stars of different magnitude and color index. Since Silicon Photo-Multipliers (SiPMs) are very promising for fluorescence telescopes of next generation, they are under consideration for the realization of a new prototype of EUSO Photo Detector Module (PDM). The response of this sensor type is under investigation through simulations and laboratory experimentation.

  18. EUSO-TA prototype telescope

    Science.gov (United States)

    Bisconti, Francesca; JEM-EUSO Collaboration

    2016-07-01

    EUSO-TA is one of the prototypes developed for the JEM-EUSO project, a space-based large field-of-view telescope to observe the fluorescence light emitted by cosmic ray air showers in the atmosphere. EUSO-TA is a ground-based prototype located at the Telescope Array (TA) site in Utah, USA, where an Electron Light Source and a Central Laser Facility are installed. The purpose of the EUSO-TA project is to calibrate the prototype with the TA fluorescence detector in presence of well-known light sources and cosmic ray air showers. In 2015, the detector started the first measurements and tests using the mentioned light sources have been performed successfully. A first cosmic ray candidate has been observed, as well as stars of different magnitude and color index. Since Silicon Photo-Multipliers (SiPMs) are very promising for fluorescence telescopes of next generation, they are under consideration for the realization of a new prototype of EUSO Photo Detector Module (PDM). The response of this sensor type is under investigation through simulations and laboratory experimentation.

  19. Rapid Prototyping of Formally Modelled Distributed Systems

    OpenAIRE

    Buchs, Didier; Buffo, Mathieu; Titsworth, Frances M.

    1999-01-01

    This paper presents various kinds of prototypes, used in the prototyping of formally modelled distributed systems. It presents the notions of prototyping techniques and prototype evolution, and shows how to relate them to the software life-cycle. It is illustrated through the use of the formal modelling language for distributed systems CO-OPN/2.

  20. Development of Experimental Setup of Metal Rapid Prototyping Machine using Selective Laser Sintering Technique

    Science.gov (United States)

    Patil, S. N.; Mulay, A. V.; Ahuja, B. B.

    2018-04-01

    Unlike in the traditional manufacturing processes, additive manufacturing as rapid prototyping, allows designers to produce parts that were previously considered too complex to make economically. The shift is taking place from plastic prototype to fully functional metallic parts by direct deposition of metallic powders as produced parts can be directly used for desired purpose. This work is directed towards the development of experimental setup of metal rapid prototyping machine using selective laser sintering and studies the various parameters, which plays important role in the metal rapid prototyping using SLS technique. The machine structure in mainly divided into three main categories namely, (1) Z-movement of bed and table, (2) X-Y movement arrangement for LASER movements and (3) feeder mechanism. Z-movement of bed is controlled by using lead screw, bevel gear pair and stepper motor, which will maintain the accuracy of layer thickness. X-Y movements are controlled using timing belt and stepper motors for precise movements of LASER source. Feeder mechanism is then developed to control uniformity of layer thickness metal powder. Simultaneously, the study is carried out for selection of material. Various types of metal powders can be used for metal RP as Single metal powder, mixture of two metals powder, and combination of metal and polymer powder. Conclusion leads to use of mixture of two metals powder to minimize the problems such as, balling effect and porosity. Developed System can be validated by conducting various experiments on manufactured part to check mechanical and metallurgical properties. After studying the results of these experiments, various process parameters as LASER properties (as power, speed etc.), and material properties (as grain size and structure etc.) will be optimized. This work is mainly focused on the design and development of cost effective experimental setup of metal rapid prototyping using SLS technique which will gives the feel of

  1. Evaluation of Computer-Assisted Instruction in Principles of Economics

    Directory of Open Access Journals (Sweden)

    Dennis Coates

    2001-04-01

    Full Text Available Despite increasing use, little is known about the effectiveness of web-based instructional material. This study assesses the effectiveness of supplementary web-based materials and activities in introductory economics courses. We have collected data on 66 students from three principles sections that describe demographic characteristics, use of web-based instructional resources, and performance on graded quizzes and examinations. We use this data to statistically assess the effectiveness of the web-based material. Student utilization of web-based material was extensive. Students frequently used on-line practice quizzes and accessed the web-based material often. A sizable fraction of the students actively posted and read threaded discussions on the course bulletin board. The statistical analysis shows that both on-line computer graded practice quizzes and posting to the class bulletin board are positively correlated with student performance on the quizzes and exams, but use of web-based content and passive reading of bulletin board posts ("lurking" is not. These results suggest that faculty should focus more on developing self-test quizzes and effective bulletin board discussion projects and less on generating on-line content.

  2. Reading Comprehension Instruction Practices in Sierra Leone

    NARCIS (Netherlands)

    Hersbach, S.; Denessen, E.J.P.G.; Droop, W.

    2014-01-01

    Aim: In this study an attempt was made to give insight in the way reading comprehension is taught in Sierra Leone. Attention was paid to the didactical strategies and the materials used during reading comprehension instruction. Methodology: Primary school teachers in Sierra Leone (N=43) were

  3. Effect of language of instruction on physics achievement

    Science.gov (United States)

    Ho, Kwok K.

    This study investigated the relationship between physics achievement and language of instruction in a situation where instruction was in the second language of both students and teachers. One hundred and seventy-six grade ten physics students (first language was Chinese) were selected from four classes of two secondary schools in Hong Kong. For three months (with four lessons per week), two classes of students learned the content material (light and sound) in Chinese and two classes learned the material in English. Group differences were controlled by using individual aptitude scores as covariates in the analysis. There were no differences in achievement, students' motivation, and effort spent in physics in that controlled teaching period. This was probably because the Anglo-Chinese group was sufficiently proficient in English so they did not encounter additional difficulty in learning physics when compared with the Chinese group.

  4. Architectural Prototyping in Industrial Practice

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2008-01-01

    Architectural prototyping is the process of using executable code to investigate stakeholders’ software architecture concerns with respect to a system under development. Previous work has established this as a useful and cost-effective way of exploration and learning of the design space of a system......, in addressing issues regarding quality attributes, in addressing architectural risks, and in addressing the problem of knowledge transfer and conformance. Little work has been reported so far on the actual industrial use of architectural prototyping. In this paper, we report from an ethnographical study...... and focus group involving architects from four companies in which we have focused on architectural prototypes. Our findings conclude that architectural prototypes play an important role in resolving problems experimentally, but less so in exploring alternative solutions. Furthermore, architectural...

  5. Ultra-High-Resolution Computed Tomography of the Lung: Image Quality of a Prototype Scanner

    OpenAIRE

    Kakinuma, Ryutaro; Moriyama, Noriyuki; Muramatsu, Yukio; Gomi, Shiho; Suzuki, Masahiro; Nagasawa, Hirobumi; Kusumoto, Masahiko; Aso, Tomohiko; Muramatsu, Yoshihisa; Tsuchida, Takaaki; Tsuta, Koji; Maeshima, Akiko Miyagi; Tochigi, Naobumi; Watanabe, Shun-ichi; Sugihara, Naoki

    2015-01-01

    Purpose: The image noise and image quality of a prototype ultra-high-resolution computed tomography (U-HRCT) scanner was evaluated and compared with those of conventional high-resolution CT (C-HRCT) scanners. Materials and Methods: This study was approved by the institutional review board. A U-HRCT scanner prototype with 0.25 mm × 4 rows and operating at 120 mAs was used. The C-HRCT images were obtained using a 0.5 mm × 16 or 0.5 mm × 64 detector-row CT scanner operating at 150 mAs. Images fr...

  6. PEAR: Prototyping Expressive Animated Robots - A framework for social robot prototyping

    OpenAIRE

    Balit , Etienne; Vaufreydaz , Dominique; Reignier , Patrick

    2018-01-01

    International audience; Social robots are transitioning from lab experiments to commercial products, creating new needs for proto-typing and design tools. In this paper, we present a framework to facilitate the prototyping of expressive animated robots. For this, we start by reviewing the design of existing social robots in order to define a set of basic components of social robots. We then show how to extend an existing 3D animation software to enable the animation of these components. By co...

  7. A Prototype Lip Balm: Summary of Three Dermatological Studies Demonstrating Safety and Acceptability for Sensitive Skin.

    Science.gov (United States)

    Nisbet, Stephanie

    Data were generated from three studies to assess the tolerability and acceptability of a prototype cosmetic lip balm. Dermatological assessments of topical compatibility (primary and cumulative irritability and sensitization), photoirritant and topical photosensitizer potential, and acceptability for safe use of a prototype cosmetic lip balm on sensitive skin are summarized. In Study 1, the product was applied to the volunteers' backs under a semiocclusive patch followed by patch removal/reapplication over 6 weeks to assess the irritant and allergic potential of the product. Dermatological assessments were performed at the beginning and end of the study or when there was evidence of positivity or adverse event. Study 2 was conducted by applying the product to the volunteers' backs under a semiocclusive patch, followed by patch removal/reapplication and irradiation of the test area with ultraviolet A (UVA) radiation at various intervals over 5 weeks. Dermatological assessments were performed to assess the product's role in the induction of photoirritancy and photosensitization. Clinical and subjective assessments for acceptability were obtained during Study 3 in volunteers with a diagnosis of sensitive skin and those who used the product as per instructions for use during the study period. The data generated from the three studies demonstrated no evidence of primary or cumulative dermal irritation or of dermal sensitization. In addition, no photoirritation potential or photosensitization potential was observed. As assessed by dermatologic monitoring and subject diary entries, the prototype lip balm did not cause irritation or sensitization reactions when used for 28 days in volunteers with a diagnosis of sensitive skin. Based on these findings, the prototype lip balm can be considered suitable for use for people with sensitive skin.

  8. 40 CFR 1060.130 - What installation instructions must I give to equipment manufacturers?

    Science.gov (United States)

    2010-07-01

    ... specify the requirements for the fuel cap, such as the allowable materials, thread pattern, how it must... liquid fuel. (4) Describe instructions for installing components so they will operate according to design... equivalent format. For example, you may post instructions on a publicly available Web site for downloading or...

  9. The Scintillator Tile Hadronic Calorimeter Prototype

    International Nuclear Information System (INIS)

    Rusinov, V.

    2006-01-01

    A high granularity scintillator hadronic calorimeter prototype is described. The calorimeter is based on a novel photodetector - Silicon Photo-Multiplier (SiPM). The main parameters of SiPM are discussed as well as readout cell construction and optimization. The experience with a small prototype production and testing is described. A new 8 k channel prototype is being manufactured now

  10. User's guide for the KBERT 1.0 code: For the knowledge-based estimation of hazards of radioactive material releases from DOE nuclear facilities

    International Nuclear Information System (INIS)

    Browitt, D.S.; Washington, K.E.; Powers, D.A.

    1995-07-01

    The possibility of worker exposure to radioactive materials during accidents at nuclear facilities is a principal concern of the DOE. The KBERT software has been developed at Sandia National Laboratories under DOE support to address this issue by assisting in the estimation of risks posed by accidents at chemical and nuclear facilities. KBERT is an acronym for Knowledge-Based system for Estimating hazards of Radioactive material release Transients. The current prototype version of KBERT focuses on calculation of doses and consequences to in-facility workers due to accidental releases of radioactivity. This report gives detailed instructions on how a user who is familiar with the design, layout and potential hazards of a facility can use KBERT to assess the risks to workers in that facility. KBERT is a tool that allows a user to simulate possible accidents and observe the predicted consequences. Potential applications of KBERT include the evaluation of the efficacy of evacuation practices, worker shielding, personal protection equipment and the containment of hazardous materials

  11. Micromachining Lithium Niobate for Rapid Prototyping of Resonant Biosensors

    International Nuclear Information System (INIS)

    Al-Shibaany, Zeyad Yousif Abdoon; Hedley, John; Huo, Dehong; Hu, Zhongxu

    2014-01-01

    Lithium niobate material is widely used in MEMS application due to its piezoelectric properties. This paper presents the micromachining process of lithium niobate to rapid prototype a resonant biosensor design. A high precision CNC machine was used to machine a sample of lithium niobate material at 5 different spindle speeds to find out the best conditions to machine this brittle material. A qualitative visual check of the surface was performed by using scanning electron microscopy, surface roughness was quantitatively investigated using an optical surface profiler and Raman spectroscopy to check the strain of the surface. Results show that the surface quality of the lithium niobate was significantly affected by the spindle speed with optimum conditions at 70k rpm giving a strained surface with 500 nm rms roughness

  12. Virtual Video Prototyping for Healthcare Systems

    DEFF Research Database (Denmark)

    Bardram, Jakob Eyvind; Bossen, Claus; Lykke-Olesen, Andreas

    2002-01-01

    Virtual studio technology enables the mixing of physical and digital 3D objects and thus expands the way of representing design ideas in terms of virtual video prototypes, which offers new possibilities for designers by combining elements of prototypes, mock-ups, scenarios, and conventional video....... In this article we report our initial experience in the domain of pervasive healthcare with producing virtual video prototypes and using them in a design workshop. Our experience has been predominantly favourable. The production of a virtual video prototype forces the designers to decide very concrete design...... issues, since one cannot avoid paying attention to the physical, real-world constraints and to details in the usage-interaction between users and technology. From the users' perspective, during our evaluation of the virtual video prototype, we experienced how it enabled users to relate...

  13. Scholar-activating instructional materials on quantum physics. Pt. 1. On the way to quantum physics

    International Nuclear Information System (INIS)

    Huebel, Horst

    2008-01-01

    Traditionally in the interest on quantum physics referring to school the question holds the spotlight, whether electrons of photons are now particles ore waves, a formulation of the question, which is often characterized by the phrase ''Wave-particle dualism'', which as is known not exists in its original meaning. Contrarily by the author - starting from important preparations of Kueblbeck and Mueller - a new concept for the treatment of quantum physics for the school is proposed, which puts fundamental facts in the foreground, comparable with Kueblbeck-Mueller's ''Wesenzuege''. The fundamental facts are similar to axioms of quantum physics, by means of which a large number of experiments and phenomena of quantum physics can at least qualitatively - in a heuristic way - be explained. Instead of the mentioned wave-particle dualism here undeterminism and complementarity are put in the foreground. The new concept is in the internet extensively presented under http://www.forphys.de with may further materials. In the partial volumes of this publication manifold and carefully elaborated instructional materials are presented, by which the scholars can themselves elaborate the partial set of quantum physics referred to school by different methods like learning at stations, short referates, internet research, group puzzle, the query-sheet or the card-index method etc. In the present 1. part materials for prestages of quantum physics are provided, so to interference trials, which-way experiments, trials on the particle conception of quantum theory, on photons, and on Planck's action quantum. A section is also dedicated to the so-called ''model-philosophy'' as preliminary interpretation of quantum physics, which corresponds more to tradiational ways of proceeding

  14. Flight prototype CO2 and humidity control system

    Science.gov (United States)

    Rudy, K. M.

    1979-01-01

    A regenerable CO2 and humidity control system is presently being developed for potential use on shuttle as an alternative to the baseline lithium hydroxide system. The system utilizes a sorbent material (designated HS-C) to adsorb CO2 and the latent heat load from the cabin atmosphere and desorb the CO2 and water vapor overboard when exposed to a space vacuum, thus reducing the overall vehicle heat rejection load. Continuous operation is achieved by utilizing two beds which are alternatively cycled between adsorption and desorption. The HS-C material process was verified. Design concepts for the auxiliary components for the HS-C prototype system were generated. Performance testing verified system effectiveness in controlling CO2 partial pressure and humidity.

  15. Prompt and Precise Prototyping

    Science.gov (United States)

    2003-01-01

    For Sanders Design International, Inc., of Wilton, New Hampshire, every passing second between the concept and realization of a product is essential to succeed in the rapid prototyping industry where amongst heavy competition, faster time-to-market means more business. To separate itself from its rivals, Sanders Design aligned with NASA's Marshall Space Flight Center to develop what it considers to be the most accurate rapid prototyping machine for fabrication of extremely precise tooling prototypes. The company's Rapid ToolMaker System has revolutionized production of high quality, small-to-medium sized prototype patterns and tooling molds with an exactness that surpasses that of computer numerically-controlled (CNC) machining devices. Created with funding and support from Marshall under a Small Business Innovation Research (SBIR) contract, the Rapid ToolMaker is a dual-use technology with applications in both commercial and military aerospace fields. The advanced technology provides cost savings in the design and manufacturing of automotive, electronic, and medical parts, as well as in other areas of consumer interest, such as jewelry and toys. For aerospace applications, the Rapid ToolMaker enables fabrication of high-quality turbine and compressor blades for jet engines on unmanned air vehicles, aircraft, and missiles.

  16. Multimedia Instructional Tools' Impact on Student Motivation and Learning Strategies in Computer Applications Courses

    Science.gov (United States)

    Chapman, Debra; Wang, Shuyan

    2015-01-01

    Multimedia instructional tools (MMIT) have been identified as a way effectively and economically present instructional material. MMITs are commonly used in introductory computer applications courses as MMITs should be effective in increasing student knowledge and positively impact motivation and learning strategies, without increasing costs. This…

  17. Rapid prototyping: een veelbelovende methode

    NARCIS (Netherlands)

    Haverman, T.M.; Karagozoglu, K.H.; Prins, H.; Schulten, E.A.J.M.; Forouzanfar, T.

    2013-01-01

    Rapid prototyping is a method which makes it possible to produce a three-dimensional model based on two-dimensional imaging. Various rapid prototyping methods are available for modelling, such as stereolithography, selective laser sintering, direct laser metal sintering, two-photon polymerization,

  18. Electronics lab instructors' approaches to troubleshooting instruction

    Science.gov (United States)

    Dounas-Frazer, Dimitri R.; Lewandowski, H. J.

    2017-06-01

    In this exploratory qualitative study, we describe instructors' self-reported practices for teaching and assessing students' ability to troubleshoot in electronics lab courses. We collected audio data from interviews with 20 electronics instructors from 18 institutions that varied by size, selectivity, and other factors. In addition to describing participants' instructional practices, we characterize their perceptions about the role of troubleshooting in electronics, the importance of the ability to troubleshoot more generally, and what it means for students to be competent troubleshooters. One major finding of this work is that, while almost all instructors in our study said that troubleshooting is an important learning outcome for students in electronics lab courses, only half of instructors said they directly assessed students' ability to troubleshoot. Based on our findings, we argue that there is a need for research-based instructional materials that attend to both cognitive and noncognitive aspects of troubleshooting proficiency. We also identify several areas for future investigation related to troubleshooting instruction in electronics lab courses.

  19. RIM as the data base management system for a material properties data base

    Science.gov (United States)

    Karr, P. H.; Wilson, D. J.

    1984-01-01

    Relational Information Management (RIM) was selected as the data base management system for a prototype engineering materials data base. The data base provides a central repository for engineering material properties data, which facilitates their control. Numerous RIM capabilities are exploited to satisfy prototype data base requirements. Numerical, text, tabular, and graphical data and references are being stored for five material types. Data retrieval will be accomplished both interactively and through a FORTRAN interface. The experience gained in creating and exercising the prototype will be used in specifying requirements for a production system.

  20. Mechanical Material Engineering

    International Nuclear Information System (INIS)

    Kim, Mun Il

    1993-01-01

    This book introduced mechanical material with introduction, basic problems about metal ingredient of machine of metal and alloy, property of metal material mechanical metal material such as categorization of metal material and high tensile structure steel, mechanic design and steel material with three important points on using of steel materials, selection and directions machine structural steel, selection and directions of steel for tool, selection and instruction of special steel like stainless steel and spring steel, nonferrous metal materials and plastic.

  1. High temperature alloys for the primary circuit of a prototype nuclear process heat plant

    International Nuclear Information System (INIS)

    Ennis, P.J.; Schuster, H.

    1979-01-01

    As part of a comprehensive materials test programme for the High Temperature Reactor Project 'Prototype Plant for Nuclear Process Heat' (PNP), high temperature alloys are being investigated for primary circuit components operating at temperatures above 750 0 C. On the basis of important material parameters, in particular corrosion behaviour and mechanical properties in primary coolant helium, the potential of candidate alloys is discussed. By comparing specific PNP materials data with the requirements of PNP and those of conventional plant, the implications for the materials programme and component design are given. (orig.)

  2. Development and Experimental Results from a 1 kW Prototype AMR

    DEFF Research Database (Denmark)

    Bahl, Christian; Engelbrecht, Kurt; Eriksen, Dan

    2012-01-01

    containing an active magnetic regenerator (AMR) bed. As outlined in Pryds et al. (2009) a small scale AMR test device has been used for materials choice and optimising operation, with each component being thoroughly characterised and tested before implementation. The prototype design facilitates easy......A novel rotary magnetic refrigeration device has been designed and constructed following the concepts recently outlined in Bahl et al. (2011). The magnet and flow system design allow for almost continuous usage of both the magnetic field and the magnetocaloric material in 24 cassettes, each...

  3. Restart Plan for the Prototype Vertical Denitration Calciner [SD Coversheet has Incorrect Document Number

    Energy Technology Data Exchange (ETDEWEB)

    SUTTER, C.S.

    1999-07-26

    Testing activities on the Prototype Vertical Denitration Calciner at PFP were suspended in January 1997 due to the hold on fissile material handling in the facility. The Restart Plan will govern the transition of the test program from the completion of the activity based startup review; through equipment checkout and surrogate material runs; to resumption of the testing program and transition to unrestricted testing.

  4. Rapid Prototyping — A Tool for Presenting 3-Dimensional Digital Models Produced by Terrestrial Laser Scanning

    Directory of Open Access Journals (Sweden)

    Juho-Pekka Virtanen

    2014-07-01

    Full Text Available Rapid prototyping has received considerable interest with the introduction of affordable rapid prototyping machines. These machines can be used to manufacture physical models from three-dimensional digital mesh models. In this paper, we compare the results obtained with a new, affordable, rapid prototyping machine, and a traditional professional machine. Two separate data sets are used for this, both of which were acquired using terrestrial laser scanning. Both of the machines were able to produce complex and highly detailed geometries in plastic material from models based on terrestrial laser scanning. The dimensional accuracies and detail levels of the machines were comparable, and the physical artifacts caused by the fused deposition modeling (FDM technique used in the rapid prototyping machines could be found in both models. The accuracy of terrestrial laser scanning exceeded the requirements for manufacturing physical models of large statues and building segments at a 1:40 scale.

  5. Field evaluation of prototype electrofibrous filters

    International Nuclear Information System (INIS)

    Kuhl, W.D.; Bergman, W.; Biermann, A.H.; Lum, B.Y.

    1982-01-01

    New prototype electrofibrous filters were designed, built and evaluated in laboratory tests and in field installations. Two prototypes were designed for use in nuclear ventilation ducts as prefilters to HEPA filters. One prototype is designed to be a permanent component of the ventilation system while the other is a disposable unit. The disposable electrofibrous prefilter was installed in the exhaust stream of a glove box in which barrels of uranium turnings are burned. Preliminary tests show the disposal prefilter is effectively prolonging the HEPA filter life. An earlier prototype of the rolling prefilter was upgraded to meet the increased requirements for installation in a nuclear facility. This upgraded prototype was evaluated in the fire test facility at LLNL and shown to be effective in protecting HEPA filters from plugging under the most severe smoke conditions. The last prototype described in this report is a recirculating air filter. After demonstrating a high performance in laboratory tests the unit was shipped to Savannah River where it is awaiting installation in a Pu fuel fabrication facility. An analysis of the particulate problem in Savannah River indicates that four recirculating air filter will save $172,000 per year in maintenance costs

  6. Window prototypes during the project

    DEFF Research Database (Denmark)

    Schultz, Jørgen Munthe

    1996-01-01

    The conditions for the PASSYS test and the results of the measurements on one of the aerogel window prototypes are described.......The conditions for the PASSYS test and the results of the measurements on one of the aerogel window prototypes are described....

  7. Design and construction of a prototype for distillation of 131 I by the dry method

    International Nuclear Information System (INIS)

    Palacios Gonzalez, O.G.M.

    1993-01-01

    Due to need of a procedure standard for production of 131 I in the Mexican Republic, is very important stablish, based in two proof for the method in hot of distillation in dry development satisfactory (radiochemistry purity of distillation 99.7 %. The development of the methodology used is based in the necessity to experience with greater amount of raw material or activity in the white as soon more time of irradiation, and, using a semiautomatic for the personal agent of the production of prototype is independent of specific characteristics to method for dry distillation, as: raw materials used, temperatures of distillation and gas for carry to 131 I. The proof to prototype are functional mechanical type, however to perfect the dry method of distillation is necessary to finish the stage of factibility to prototype. The results of proofs were in form general satisfactory waiting only to refine details and to propose the construction of a better equipment of distillation used stainless steel with completed more exacts for to garantized an useful life great to equipment and to obtain a production of 131 I continuously in the next years. (Author). 21 refs, 26 figs, 8 tabs

  8. Test case preparation using a prototype

    OpenAIRE

    Treharne, Helen; Draper, J.; Schneider, Steve A.

    1998-01-01

    This paper reports on the preparation of test cases using a prototype within the context of a formal development. It describes an approach to building a prototype using an example. It discusses how a prototype contributes to the testing activity as part of a lifecycle based on the use of formal methods. The results of applying the approach to an embedded avionics case study are also presented.

  9. Micro rapid prototyping system for micro components

    International Nuclear Information System (INIS)

    Li Xiaochun; Choi Hongseok; Yang Yong

    2002-01-01

    Similarities between silicon-based micro-electro-mechanical systems (MEMS) and Shape Deposition Manufacturing (SDM) processes are obvious: both integrate additive and subtractive processes and use part and sacrificial materials to obtain functional structures. These MEMS techniques are two-dimensional (2-D) processes for a limited number of materials while SDM enables the building of parts that have traditionally been impossible to fabricate because of their complex shapes or of their variety in materials. This work presents initial results on the development of a micro rapid prototyping system that adapts SDM methodology to micro-fabrication. This system is designed to incorporate microdeposition and laser micromachining. In the hope of obtaining a precise microdeposition, an ultrasonic-based micro powder-feeding mechanism was developed in order to form thin patterns of dry powders that can be cladded or sintered onto a substrate by a micro-sized laser beam. Furthermore, experimental results on laser micromachining using a laser beam with a wavelength of 355 nm are also presented. After further improvement, the developed micro manufacturing system could take computer-aided design (CAD) output to reproduce 3-D heterogeneous micro-components from a wide selection of materials

  10. Inquiry-Oriented Instruction: A Conceptualization of the Instructional Principles

    Science.gov (United States)

    Kuster, George; Johnson, Estrella; Keene, Karen; Andrews-Larson, Christine

    2018-01-01

    Research has highlighted that inquiry-based learning (IBL) instruction leads to many positive student outcomes in undergraduate mathematics. Although this research points to the value of IBL instruction, the practices of IBL instructors are not well-understood. Here, we offer a characterization of a particular form of IBL instruction:…

  11. Effects of carbon fibres on the life cycle assessment of additively manufactured injection moulding inserts for rapid prototyping

    DEFF Research Database (Denmark)

    Hofstätter, Thomas; Bey, Niki; Mischkot, Michael

    2017-01-01

    properties and lifetime. The additively manufactured inserts are compared to the standard materials steel, aluminium and brass. The investigated part of the production and prototyping phase considers the insert itself, the moulded part, and resulting waste material of the injection moulding process....

  12. Using Technology to Facilitate Differentiated High School Science Instruction

    Science.gov (United States)

    Maeng, Jennifer L.

    2017-10-01

    This qualitative investigation explored the beliefs and practices of one secondary science teacher, Diane, who differentiated instruction and studied how technology facilitated her differentiation. Diane was selected based on the results of a previous study, in which data indicated that Diane understood how to design and implement proactively planned, flexible, engaging instructional activities in response to students' learning needs better than the other study participants. Data for the present study included 3 h of semi-structured interview responses, 37.5 h of observations of science instruction, and other artifacts such as instructional materials. This variety of data allowed for triangulation of the evidence. Data were analyzed using a constant comparative approach. Results indicated that technology played an integral role in Diane's planning and implementation of differentiated science lessons. The technology-enhanced differentiated lessons employed by Diane typically attended to students' different learning profiles or interest through modification of process or product. This study provides practical strategies for science teachers beginning to differentiate instruction, and recommendations for science teacher educators and school and district administrators. Future research should explore student outcomes, supports for effective formative assessment, and technology-enhanced readiness differentiation among secondary science teachers.

  13. Prototype evaluation of transformation toughened blast resistant naval hull steels: Part II

    Science.gov (United States)

    Saha, A.; Jung, J.; Olson, G. B.

    2007-07-01

    Application of a systems approach to computational materials design led to the theoretical design of a transformation toughened ultratough high-strength plate steel for blast-resistant naval hull applications. A first prototype alloy has achieved property goals motivated by projected naval hull applications requiring extreme fracture toughness (C v > 85 ft-lbs or 115 J corresponding to K Id≥ 200 ksi.in1/2 or 220 MPa.m1/2) at strength levels of 150 180 ksi (1,030 1,240 MPa) yield strength in weldable, formable plate steels. A continuous casting process was simulated by slab casting the prototype alloy as a 1.75‧‧ (4.45 cm) plate. Consistent with predictions, compositional banding in the plate was limited to an amplitude of 6 7.5 wt% Ni and 3.5 5 wt% Cu. Examination of the oxide scale showed no evidence of hot shortness in the alloy during hot working. Isothermal transformation kinetics measurements demonstrated achievement of 50% bainite in 4 min at 360 °C. Hardness and tensile tests confirmed predicted precipitation strengthening behavior in quench and tempered material. Multi-step tempering conditions were employed to achieve the optimal austenite stability resulting in significant increase of impact toughness to 130 ft-lb (176 J) at a strength level of 160 ksi (1,100 MPa). Comparison with the baseline toughness strength combination determined by isochronal tempering studies indicates a transformation toughening increment of 65% in Charpy energy. Predicted Cu particle number densities and the heterogeneous nucleation of optimal stability high Ni 5 nm austenite on nanometer-scale copper precipitates in the multi-step tempered samples was confirmed using three-dimensional atom probe microanalysis. Charpy impact tests and fractography demonstrate ductile fracture with C v > 80 ft-lbs (108 J) down to -40 °C, with a substantial toughness peak at 25 °C consistent with designed transformation toughening behavior. The properties demonstrated in this first

  14. Design and construction of a prototype for the obtention of 32P

    International Nuclear Information System (INIS)

    Duarte A, C.

    2003-01-01

    The 32 P are a pure emitting radioisotope of maximum energy of 1.71 MeV with half life of 14.28 days that he has applications in the industry, in agriculture, in medicine, in biology and in ecology (6,11,12,13,17,21,22,23,24,25,26,27,28,29,30,31,32 33).The 32 P can be used in the industry like radiotracer in the investigation of some operations and processes and as element of measurement of some industrial meters. In agriculture is used as radiotracer (29) in the investigation of diverse biological processes that have to do with the production of diverse nutritious products. In medicine has uses but very therapeutic mainly in the treatment of some become cancerous (28, 31, 25, 27) in the diagnosis of blood disorders (24) and like part of materials of production of aortic prosthesis (6). The 32 P are also used in the molecular investigation in biology and in genetics (33), and in studies of ecosystems (32) and of DNA (22). One can obtain the 32 P by means of diverse nuclear reactions depending on the material used as matter it prevails, since it doesn't exist in the nature. But anyone in the ways of obtaining it it should imply a process of radiochemical separation that involves so many steps like they are required, depending on the material used as matter prevails, of the purity with which he wants himself to obtain and of the resources that it has available. The objective of this work was design, to build and to prove a prototype to obtain the 32 P to leave of the irradiation of S α with fast neutrons at experimental level, which implies also to design a process that contemplates diverse stages and procedures for each one of them. The process was outlined in five stages: matter purification prevails, preparation of irradiation capsules, irradiation of irradiation capsules, transport and opening capsules of irradiation and radiochemical separation. In the last stage it was where uses the prototype of radiochemical separation in basis to the outlined process and

  15. SWANS: A Prototypic SCALE Criticality Sequence for Automated Optimization Using the SWAN Methodology

    International Nuclear Information System (INIS)

    Greenspan, E.

    2001-01-01

    SWANS is a new prototypic analysis sequence that provides an intelligent, semi-automatic search for the maximum k eff of a given amount of specified fissile material, or of the minimum critical mass. It combines the optimization strategy of the SWAN code with the composition-dependent resonance self-shielded cross sections of the SCALE package. For a given system composition arrived at during the iterative optimization process, the value of k eff is as accurate and reliable as obtained using the CSAS1X Sequence of SCALE-4.4. This report describes how SWAN is integrated within the SCALE system to form the new prototypic optimization sequence, describes the optimization procedure, provides a user guide for SWANS, and illustrates its application to five different types of problems. In addition, the report illustrates that resonance self-shielding might have a significant effect on the maximum k eff value a given fissile material mass can have

  16. SWANS: A Prototypic SCALE Criticality Sequence for Automated Optimization Using the SWAN Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Greenspan, E.

    2001-01-11

    SWANS is a new prototypic analysis sequence that provides an intelligent, semi-automatic search for the maximum k{sub eff} of a given amount of specified fissile material, or of the minimum critical mass. It combines the optimization strategy of the SWAN code with the composition-dependent resonance self-shielded cross sections of the SCALE package. For a given system composition arrived at during the iterative optimization process, the value of k{sub eff} is as accurate and reliable as obtained using the CSAS1X Sequence of SCALE-4.4. This report describes how SWAN is integrated within the SCALE system to form the new prototypic optimization sequence, describes the optimization procedure, provides a user guide for SWANS, and illustrates its application to five different types of problems. In addition, the report illustrates that resonance self-shielding might have a significant effect on the maximum k{sub eff} value a given fissile material mass can have.

  17. Development of a permanently controllable rotating biopsy device. Pt. I. Theoretical considerations and in-vitro results for five different prototypes

    International Nuclear Information System (INIS)

    Schaefer, Philipp Jost; Jahnke, T.; Andres, H.; Heller, M.; Schaefer, F.K.; Hedderich, J.

    2009-01-01

    Purpose: to develop different prototypes of permanently controllable rotating biopsy devices with determination of the most efficient prototype in biopsies in bovine myocardium. Materials and Methods: Five different prototypes of 18-gauge rotating biopsy devices were designed and constructed, four (1-4) with various drill-like cutting edges and one (5) cannula type with a lancet-like helically bent cutting edge. Using bovine myocardium as the biopsy tissue, n = 100 specimens per prototype were obtained, and a quantitative analysis including tissue fragmentation, length in mm and weight in mg was carried out. For statistical analysis, the chi-square test for tissue fragmentation and Kruskal-Wallis test for the parameters length and weight were calculated. Results: prototype 5 showed the highest rate of extraction of one-fragment specimens in n=66 cases and the lowest rate of failure to obtain tissue in n=11 cases. The mean length/weight were 4.15 mm/3.91 mg for prototype 1, 1.80 mm/1.66 mg for prototype 2, 4.61 mm/3.28 mg for prototype 3, 5.20 mm/3.74 mg for prototype 4, and 9.57 mm/6.97 mg for prototype 5. In all three categories, prototype 5 was significantly superior to the prototypes 1-4 with p < 0.001. Conclusion: the cannula type with a lancet-like helically bent cutting edge proved to be the most efficient prototype and may now be tested competitively against established automated biopsy devices in vitro. (orig.)

  18. Instruction of 7 september 1989 on measures to be taken by the public authorities in case of an accident during the maritime transport of radioactive materials (Nucmar Plan)

    International Nuclear Information System (INIS)

    1989-09-01

    This Instruction of the Prime Minister called Plan Nucmar, defines the general principles for the organisation of measures to be taken by the authorities in case of an accident occurring during a civilian maritime transport of radioactive materials entailing or possibly entailing damage which would affect the health of man or the marine environment. The Plan applies to any accident occurring within French territorial waters and beyond them when the coast and related interests are endangered and concerns the transport of Class 7 materials (radioactive materials with a specific activity exceeding 70 Bq/kg) under the International Maritime Dangerous Goods Code [fr

  19. Dynamic fracture characterization of material

    International Nuclear Information System (INIS)

    Kobayashi, A.S.; Emery, A.F.; Liaw, B.M.

    1981-01-01

    The influences of a wide range of material properties, i.e. of A533B steel, a silicon nitride ceramic and a Homalite-100 photoelastic polymer, as well as the influences of the specimen sizes on the dynamic fracture response of fracture specimens are presented in this paper. The results of a numerical study show that the dynamic fracture responses of these fracture specimens of proportional dimensions were indistinguishable provided the normalized dynamic fracture toughness versus normalized crack velocity relations of the three materials coincide. The limited results suggest that should the normalized dynamic fracture toughness versus normalized crack velocity relations between prototype and model materials coincide, then dynamic fracture experiments on scaled models can be used to infer the dynamic fracture response of the prototype. (orig./HP)

  20. Motivational Measure of the Instruction Compared: Instruction Based on the ARCS Motivation Theory vs Traditional Instruction in Blended Courses

    Science.gov (United States)

    Colakoglu, Ozgur M.; Akdemir, Omur

    2012-01-01

    The ARCS Motivation Theory was proposed to guide instructional designers and teachers who develop their own instruction to integrate motivational design strategies into the instruction. There is a lack of literature supporting the idea that instruction for blended courses if designed based on the ARCS Motivation Theory provides different…

  1. A preliminary evaluation of a reusable digital sterilization indicator prototype.

    Science.gov (United States)

    Puttaiah, R; Griggs, J; D'Onofrio, M

    2014-09-01

    Sterilization of critical and semicritical instruments used in patient care must undergo a terminal process of sterilization. Use of chemical and physical indicators are important in providing information on the sterilizer's performance during each cycle. Regular and periodic monitoring of sterilizers using biological indicators is necessary in periodically validating performance of sterilizers. Data loggers or independent digital parametric indicators are innovative devices that provide more information than various classes chemical indicators. In this study we evaluated a prototype of an independent digital parametric indicator's use in autoclaves. The purpose of this study was to evaluate the performance of an independent digital indicator/data logger prototype (DS1922F) that could be used for multiple cycles within an autoclave.MG Materials and methods: Three batches of the DS1922F (150 samples) were used in this study that was conducted in a series. The first batch was challenged with 300 sterilization cycles within an autoclave and the data loggers evaluated to study failures and the reason for failure, make corrections and improve the prototype design. After changes made based on studying the first batch, the second batch of the prototype (150 samples) were challenged once again with 300 sterilization cycles within an autoclave and failure studied again in further improvement of the prototype. The final batch (3rd batch) of the prototype (150 samples) was challenged again but with 600 cycles to see how long they would last. Kaplan-Meier survival analysis analyses of all three batches was conducted (α = 0.05) and failed samples qualitatively studied in understanding the variables involved in the failure of the prototype, and in improving quality. Each tested batch provided crucial information on device failure and helped in improvement of the prototype. Mean lifetime survival of the final batch (Batch 3) of prototype was 498 (480, 516) sterilization cycles

  2. EMC² = comprehension: A reading strategy instruction framework for ...

    African Journals Online (AJOL)

    Hennie

    framework for reading strategy instruction, aimed specifically at teachers. ... interaction among the reader, the strategies the reader employs, the material ... test performance of low-ability groups (Purpura, ... so & Brown, 1992), teachers draw upon a small ... ing, scaffolding and guided practice, with a recom- ...... Measuring.

  3. Role model and prototype matching

    DEFF Research Database (Denmark)

    Lykkegaard, Eva; Ulriksen, Lars

    2016-01-01

    ’ meetings with the role models affected their thoughts concerning STEM students and attending university. The regular self-to-prototype matching process was shown in real-life role-models meetings to be extended to a more complex three-way matching process between students’ self-perceptions, prototype...

  4. The Relationship between Emotional Intelligence and Attitudes toward Computer-Based Instruction of Postsecondary Hospitality Students

    Science.gov (United States)

    Behnke, Carl; Greenan, James P.

    2011-01-01

    This study examined the relationship between postsecondary students' emotional-social intelligence and attitudes toward computer-based instructional materials. Research indicated that emotions and emotional intelligence directly impact motivation, while instructional design has been shown to impact student attitudes and subsequent engagement with…

  5. Tunable emergent heterostructures in a prototypical correlated metal

    Science.gov (United States)

    Fobes, D. M.; Zhang, S.; Lin, S.-Z.; Das, Pinaki; Ghimire, N. J.; Bauer, E. D.; Thompson, J. D.; Harriger, L. W.; Ehlers, G.; Podlesnyak, A.; Bewley, R. I.; Sazonov, A.; Hutanu, V.; Ronning, F.; Batista, C. D.; Janoschek, M.

    2018-05-01

    At the interface between two distinct materials, desirable properties, such as superconductivity, can be greatly enhanced1, or entirely new functionalities may emerge2. Similar to in artificially engineered heterostructures, clean functional interfaces alternatively exist in electronically textured bulk materials. Electronic textures emerge spontaneously due to competing atomic-scale interactions3, the control of which would enable a top-down approach for designing tunable intrinsic heterostructures. This is particularly attractive for correlated electron materials, where spontaneous heterostructures strongly affect the interplay between charge and spin degrees of freedom4. Here we report high-resolution neutron spectroscopy on the prototypical strongly correlated metal CeRhIn5, revealing competition between magnetic frustration and easy-axis anisotropy—a well-established mechanism for generating spontaneous superstructures5. Because the observed easy-axis anisotropy is field-induced and anomalously large, it can be controlled efficiently with small magnetic fields. The resulting field-controlled magnetic superstructure is closely tied to the formation of superconducting6 and electronic nematic textures7 in CeRhIn5, suggesting that in situ tunable heterostructures can be realized in correlated electron materials.

  6. Rapid prototyping of flexible intrafascicular electrode arrays by picosecond laser structuring.

    Science.gov (United States)

    Mueller, Matthias; de la Oliva, Natalia; Del Valle, Jaume; Delgado-Martínez, Ignacio; Navarro, Xavier; Stieglitz, Thomas

    2017-12-01

    Interfacing the peripheral nervous system can be performed with a large variety of electrode arrays. However, stimulating and recording a nerve while having a reasonable amount of channels limits the number of available systems. Translational research towards human clinical trial requires device safety and biocompatibility but would benefit from design flexibility in the development process to individualize probes. We selected established medical grade implant materials like precious metals and Parylene C to develop a rapid prototyping process for novel intrafascicular electrode arrays using a picosecond laser structuring. A design for a rodent animal model was developed in conjunction with an intrafascicular implantation strategy. Electrode characterization and optimization was performed first in saline solution in vitro before performance and biocompatibility were validated in sciatic nerves of rats in chronic implantation. The novel fabrication process proved to be suitable for prototyping and building intrafascicular electrode arrays. Electrochemical properties of the electrode sites were enhanced and tested for long-term stability. Chronic implantation in the sciatic nerve of rats showed good biocompatibility, selectivity and stable stimulation thresholds. Established medical grade materials can be used for intrafascicular nerve electrode arrays when laser structuring defines structure size in the micro-scale. Design flexibility reduces re-design cycle time and material certificates are beneficial support for safety studies on the way to clinical trials.

  7. Rapid prototyping of flexible intrafascicular electrode arrays by picosecond laser structuring

    Science.gov (United States)

    Mueller, Matthias; de la Oliva, Natalia; del Valle, Jaume; Delgado-Martínez, Ignacio; Navarro, Xavier; Stieglitz, Thomas

    2017-12-01

    Objective. Interfacing the peripheral nervous system can be performed with a large variety of electrode arrays. However, stimulating and recording a nerve while having a reasonable amount of channels limits the number of available systems. Translational research towards human clinical trial requires device safety and biocompatibility but would benefit from design flexibility in the development process to individualize probes. Approach. We selected established medical grade implant materials like precious metals and Parylene C to develop a rapid prototyping process for novel intrafascicular electrode arrays using a picosecond laser structuring. A design for a rodent animal model was developed in conjunction with an intrafascicular implantation strategy. Electrode characterization and optimization was performed first in saline solution in vitro before performance and biocompatibility were validated in sciatic nerves of rats in chronic implantation. Main results. The novel fabrication process proved to be suitable for prototyping and building intrafascicular electrode arrays. Electrochemical properties of the electrode sites were enhanced and tested for long-term stability. Chronic implantation in the sciatic nerve of rats showed good biocompatibility, selectivity and stable stimulation thresholds. Significance. Established medical grade materials can be used for intrafascicular nerve electrode arrays when laser structuring defines structure size in the micro-scale. Design flexibility reduces re-design cycle time and material certificates are beneficial support for safety studies on the way to clinical trials.

  8. High confidence in falsely recognizing prototypical faces.

    Science.gov (United States)

    Sampaio, Cristina; Reinke, Victoria; Mathews, Jeffrey; Swart, Alexandra; Wallinger, Stephen

    2018-06-01

    We applied a metacognitive approach to investigate confidence in recognition of prototypical faces. Participants were presented with sets of faces constructed digitally as deviations from prototype/base faces. Participants were then tested with a simple recognition task (Experiment 1) or a multiple-choice task (Experiment 2) for old and new items plus new prototypes, and they showed a high rate of confident false alarms to the prototypes. Confidence and accuracy relationship in this face recognition paradigm was found to be positive for standard items but negative for the prototypes; thus, it was contingent on the nature of the items used. The data have implications for lineups that employ match-to-suspect strategies.

  9. Expert systems for the transportation of hazardous and radioactive materials

    International Nuclear Information System (INIS)

    Luce, C.E.; Clover, J.C.; Ferrada, J.J.

    1994-01-01

    Under the supervision of the Transportation Technologies Group which is in the Chemical Technology Division at Oak Ridge National Laboratory, an expert system prototype for the transportation and packaging of hazardous and radioactive materials has been designed and developed. The development of the expert system prototype focused on using the combination of hypermedia elements and the Visual Basic trademark programming language. Hypermedia technology uses software that allows the user to interact with the computing environment through many formats: text, graphics, audio, and full-motion video. With the use of hypermedia, a user-friendly prototype has been developed to sort through numerous transportation regulations, thereby leading to the proper packaging for the materials. The expert system performs the analysis of regulations that an expert in shipping information would do; only the expert system performs the work more quickly. Currently, enhancements in a variety of categories are being made to the prototype. These include further expansion of non-radioactive materials, which includes any material that is hazardous but not radioactive; and the addition of full-motion video, which will depict regulations in terms that are easy to understand and which will show examples of how to handle the materials when packaging them

  10. Optimization of FIB milling for rapid NEMS prototyping

    DEFF Research Database (Denmark)

    Malm, Bjarke; Petersen, Dirch Hjorth; Lei, Anders

    2011-01-01

    We demonstrate an optimized milling technique to focused ion beam (FIB) milling in template silicon membranes for fast prototyping of nanoelectromechanical systems (NEMS). Using a single-pass milling strategy the highly topology dependent sputtering rate is boosted and shorter milling time...... is achieved. Drift independence is obtained for small critical features using a radial scan strategy, and a back scan routine ensures minimal line width deviation removing redeposited material. Milling a design similar to a nano four-point probe with a pitch down to 400nm we display what optimized FIB milling...

  11. Feasibility study--computerized application of the hazardous material regulations

    International Nuclear Information System (INIS)

    Ferrada, J.J.; Green, V.M.; Rawl, R.R.

    1992-09-01

    The feasibility of developing a full expert system for transportation and packaging of hazardous and radioactive materials was initiated within the framework of three subtasks: (1) analysis of commercial packages related to regulation scanning, (2) analysis of computer languages to develop the expert system, and (3) development of expert system prototypes. The strategy to develop the latter subtask was to first,develop modules to capture the knowledge of different areas of transportation and packaging and second, to analyze the feasibility of appending these different modules in one final full package. The individual modules development contemplated one prototype for transporting and packaging of radioactive material and another for transporting hazardous chemical materials. In the event that it is not feasible to link these two packages, the modules can always be used as stand-alone tools, or linked as a single package with some restrictions in their applicability. The work done during this fiscal year has focused on developing a prototype for transporting radioactive materials

  12. Prototype effect and the persuasiveness of generalizations

    OpenAIRE

    Dahlman, Christian; Sarwar, Farhan; Bååth, Rasmus; Wahlberg, Lena; Sikström, Sverker

    2015-01-01

    An argument that makes use of a generalization activates the prototype for the category used in the generalization. We conducted two experiments that investigated how the activation of the prototype affects the persuasiveness of the argument. The results of the experiments suggest that the features of the prototype overshadow and partly overwrite the actual facts of the case. The case is, to some extent, judged as if it had the features of the prototype instead of the features it actually ...

  13. Collaboration systems for classroom instruction

    Science.gov (United States)

    Chen, C. Y. Roger; Meliksetian, Dikran S.; Chang, Martin C.

    1996-01-01

    In this paper we discuss how classroom instruction can benefit from state-of-the-art technologies in networks, worldwide web access through Internet, multimedia, databases, and computing. Functional requirements for establishing such a high-tech classroom are identified, followed by descriptions of our current experimental implementations. The focus of the paper is on the capabilities of distributed collaboration, which supports both synchronous multimedia information sharing as well as a shared work environment for distributed teamwork and group decision making. Our ultimate goal is to achieve the concept of 'living world in a classroom' such that live and dynamic up-to-date information and material from all over the world can be integrated into classroom instruction on a real-time basis. We describe how we incorporate application developments in a geography study tool, worldwide web information retrievals, databases, and programming environments into the collaborative system.

  14. Contextual learning theory: Concrete form and a software prototype to improve early education.

    NARCIS (Netherlands)

    Mooij, Ton

    2016-01-01

    In 'contextual learning theory' three types of contextual conditions (differentiation of learning procedures and materials, integrated ICT support, and improvement of development and learning progress) are related to four aspects of the learning process (diagnostic, instructional, managerial, and

  15. Computer aided instruction in the nuclear training classroom

    International Nuclear Information System (INIS)

    McFarlane, A.F.

    1983-01-01

    The objectives formulated for introducing computer aided instruction into the nuclear training programme are discussed and the process of comparative evaluation which was followed to arrive at a preferred system is described. Three points must be remembered. First it is unlikely that specialized training will benefit from any cost reduction since the total manpower invested can seldom be applied over enough students to represent an overall cost saving when compared with conventional classroom methods. Second it is unnecessary to present on a video screen material which would be better left in its original printed textbook or manual. Thirdly care must be taken not to assume too much or too little prior knowledge in the student. In nuclear training, concentrated information transfer is required in a short period of time. Carefully planned and executed computer assisted instruction can improve teaching effectiveness and provide a welcome alternative to conventional classroom instruction. (U.K.)

  16. Development and prototype testing of MgCl 2 /graphite foam latent heat thermal energy storage system

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Dileep; Yu, Wenhua; Zhao, Weihuan; Kim, Taeil; France, David M.; Smith, Roger K.

    2018-01-01

    Composites of graphite foam infiltrated with a magnesium chloride phase-change material have been developed as high-temperature thermal energy storage media for concentrated solar power applications. This storage medium provides a high thermal energy storage density, a narrow operating temperature range, and excellent heat transfer characteristics. In this study, experimental investigations were conducted on laboratory-scale prototypes with magnesium chloride/graphite foam composite as the latent heat thermal energy storage system. Prototypes were designed and built to monitor the melt front movement during the charging/discharging tests. A test loop was built to ensure the charging/discharging of the prototypes at temperatures > 700 degrees C. Repeated thermal cycling experiments were carried out on the fabricated prototypes, and the experimental temperature profiles were compared to the predicted results from numerical simulations using COMSOL Multiphysics software. Experimental results were found to be in good agreement with the simulations to validate the thermal models.

  17. Prototype study of the Cherenkov imager of the AMS experiment

    International Nuclear Information System (INIS)

    Aguayo, P.; Aguilar-Benitez, M.; Arruda, L.; Barao, F.; Barreira, G.; Barrau, A.; Baret, B.; Belmont, E.; Berdugo, J.; Boudoul, G.; Borges, J.; Buenerd, M.; Casadei, D.; Casaus, J.; Delgado, C.; Diaz, C.; Derome, L.; Eraud, L.; Gallin-Martel, L.; Giovacchini, F.; Goncalves, P.; Lanciotti, E.; Laurenti, G.; Malinine, A.; Mana, C.; Marin, J.; Martinez, G.; Menchaca-Rocha, A.; Palomares, C.; Pereira, R.; Pimenta, M.; Protasov, K.; Sanchez, E.; Seo, E.-S.; Sevilla, I.; Torrento, A.; Vargas-Trevino, M.; Veziant, O.

    2006-01-01

    The AMS experiment includes a Cherenkov imager for mass and charge identification of charged cosmic rays. A second generation prototype has been constructed and its performances evaluated both with cosmic ray particles and with beam ions. In-beam tests have been performed using secondary nuclei from the fragmentation of 20GeV/c per nucleon Pb ions and 158GeV/c per nucleon In from the CERN SPS in 2002 and 2003. Partial results are reported. The performances of the prototype for the velocity and the charge measurements have been studied over the range of ion charge Z-bar 30. A sample of candidate silica aerogel radiators for the flight model of the detector has been tested. The measured velocity resolution of the detector was found to scale with Z -1 as expected, with a value σ(β)/β∼0.7-110 -3 for singly charged particles and an asymptotic limit in Z of 0.4-0.6x10 -4 . The measured charge resolution obtained for the n=1.05 aerogel radiator material selected for the flight model of the detector is σ(Z)=0.18 (statistical) -bar 0.015 (systematic), ensuring a good charge separation up to the iron element, for the prototype in the reported experimental conditions

  18. Test Report for Perforated Metal Air Transportable Package (PMATO) Prototype.

    Energy Technology Data Exchange (ETDEWEB)

    Bobbe, Jeffery G.; Pierce, Jim Dwight

    2003-06-01

    A prototype design for a plutonium air transport package capable of carrying 7.6 kg of plutonium oxide and surviving a ''worst-case'' plane crash has been developed by Sandia National Laboratories (SNL) for the Japan Nuclear Cycle Development Institute (JNC). A series of impact tests were conducted on half-scale models of this design for side, end, and comer orientations at speeds close to 282 m/s onto a target designed to simulate weathered sandstone. These tests were designed to evaluate the performance of the overpack concept and impact-limiting materials in critical impact orientations. The impact tests of the Perforated Metal Air Transportable Package (PMATP) prototypes were performed at SNL's 10,000-ft rocket sled track. This report describes test facilities calibration and environmental testing methods of the PMATP under specific test conditions. The tests were conducted according to the test plan and procedures that were written by the authors and approved by SNL management and quality assurance personnel. The result of these tests was that the half-scale PMATP survived the ''worst-case'' airplane crash conditions, and indicated that a full-scale PMATP, utilizing this overpack concept and these impact-limiting materials, would also survive these crash conditions.

  19. STAGING THROUGH PROTOTYPING WITH PARTIALLY BLINDED PEOPLE

    DEFF Research Database (Denmark)

    Brodersen, Søsser; Lindegaard, Hanne

    2017-01-01

    self-sufficient. Studies show that visual impaired persons rarely are involved in designing such technologies, which in many cases causes them to be excluded from everyday activities. We discuss how a design team applied collaborative methods and prototypes as boundary objects in dialogue with visually...... impaired people aiming including them as user of a self-service technology. The use of material objects from the very start of the design process contributed to a process in which the designers and visually impaired persons co-designed a new user interface that would enable these actors to collect and send...... parcels through ‘døgnbox’, an self-service, touchscreen-based postal system in Denmark (Nielsen et al. 2015). We describe how the design team used a variety of material objects to interest, enrol and mobilise the visually impaired actors in design processes (Callon 1986). We also discuss how...

  20. A prototype nuclear emergency response decision making expert system

    International Nuclear Information System (INIS)

    Chang, C.; Shih, C.; Hong, M.; Yu, W.; Su, M.; Wang, S.

    1990-01-01

    A prototype of emergency response expert system developed for nuclear power plants, has been fulfilled by Institute of Nuclear Energy Research. Key elements that have been implemented for emergency response include radioactive material dispersion assessment, dynamic transportation evacuation assessment, and meteorological parametric forecasting. A network system consists of five 80386 Personal Computers (PCs) has been installed to perform the system functions above. A further project is still continuing to achieve a more complicated and fanciful computer aid integral emergency response expert system

  1. The diametral tensile strength and hydrostability of polymer-ceramic nano-composite (pcnc) material prototypes

    Science.gov (United States)

    Yepez, Johanna

    Statement of the problem: There is a weak connection between the filler and the resin matrix of dental composites caused primarily by hydrolysis of silane coupling agent, therefore, jeopardizing the mechanical properties of the dental restorations. Purpose: The purpose of this study was to compare the diametral tensile strength (DTS) of a nano-mechanically bonded polymer ceramic nano composite (pcnc) versus the chemically bonding prototype polymer ceramic nano composite (pcnc) fabricated by using hydrolytically stable interphase. Materials and Methods: Composites were made with 60wt % filler, 38% triethyleneglycol dimethacrylate (TEDGMA), 1% camphorquinone (CQ) and 1% 2-(dimethylamino) ethyl methacrylate (DMAEMA). Tests for DTS were performed using a universal testing machine. The disk-shaped specimens were loaded in compression between two supporting plates at a crosshead speed of 0.5 mm/min until fracture. The samples, measuring 3 mm in height and 6 mm in diameter, were produced in a round stainless steel (SS) mold. A total of 144 samples were created. Groups of 48 samples were made for each of three different fillers. Specimens were soaked in artificial saliva at 37° for four time periods, dry(t=0), 1 day, 7 days, 28 days). At the end of each soaking time DTS tests were performed. Results: There where statistically significant differences in the DTS between the filler groups and the soaking times (p=dental composites is a detrimental factor in the mechanical behavior. The silanation of the filler particles have a positive influence on the mechanical properties of dental composites but the hydrolysis of the silane coupling agent can dramatically reduce the average lifetime of dental composites.

  2. 16 CFR 1633.4 - Prototype testing requirements.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Prototype testing requirements. 1633.4... STANDARD FOR THE FLAMMABILITY (OPEN FLAME) OF MATTRESS SETS The Standard § 1633.4 Prototype testing... three specimens of each prototype to be tested according to § 1633.7 and obtain passing test results...

  3. Close encounters of the prototype kind

    CERN Multimedia

    2005-01-01

    CERN is building a new control centre for the operation of its entire accelerator complex and technical infrastructure. The prototype console for the new centre has just been installed and tested. Close encounters of the prototype kind CERN is building a new control centre for the operation of its entire accelerator complex and technical infrastructure. The prototype console for the new centre has just been installed and tested. The prototype of the control consoles that will be at the heart of the future CERN Control Centre (CCC) has just been installed in the Roy Billinge Room in Building 354. Until now, there have been four separate control rooms for the CERN accelerators and technical infrastructure. The CCC, which will be located on the Prévessin site, will bring them all together in a single room. The Centre will consist of 40 consoles for four different areas (LHC, SPS, PS complex and technical infrastructure). The prototype was tested by the technicians for a month. Following installation and con...

  4. Analysis of multiple instructional techniques on the understanding and retention of select mechanical topics

    Science.gov (United States)

    Fetsco, Sara Elizabeth

    There are several topics that introductory physics students typically have difficulty understanding. The purpose of this thesis is to investigate if multiple instructional techniques will help students to better understand and retain the material. The three units analyzed in this study are graphing motion, projectile motion, and conservation of momentum. For each unit students were taught using new or altered instructional methods including online laboratory simulations, inquiry labs, and interactive demonstrations. Additionally, traditional instructional methods such as lecture and problem sets were retained. Effectiveness was measured through pre- and post-tests and student opinion surveys. Results suggest that incorporating multiple instructional techniques into teaching will improve student understanding and retention. Students stated that they learned well from all of the instructional methods used except the online simulations.

  5. 46 CFR 161.013-11 - Prototype test.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 6 2010-10-01 2010-10-01 false Prototype test. 161.013-11 Section 161.013-11 Shipping...: SPECIFICATIONS AND APPROVAL ELECTRICAL EQUIPMENT Electric Distress Light for Boats § 161.013-11 Prototype test. (a) Each manufacturer must test a prototype light identical to the lights to be certified prior to...

  6. Designing Instructor-Led Schools with Rapid Prototyping.

    Science.gov (United States)

    Lange, Steven R.; And Others

    1996-01-01

    Rapid prototyping involves abandoning many of the linear steps of traditional prototyping; it is instead a series of design iterations representing each major stage. This article describes the development of an instructor-led course for midlevel auditors using the principles and procedures of rapid prototyping, focusing on the savings in time and…

  7. THE INSTRUCTIONAL DELIVERY OF WRITING COURSE AT ENGLISH DEPARTMENT OF UMS: A NATURALISTIC STUDY

    Directory of Open Access Journals (Sweden)

    Fibrian Anindyawati

    2017-08-01

    Full Text Available The objective of this research is to get a thorough description of the teaching learning process of Writing Course at English Department of Muhammadiyah University of Surakarta, covering the syllabuses, the learning objectives, the instructional materials, the teachers’ roles, the students’ roles, the classroom techniques, the classroom procedures, the teaching media, and the assessment models. The data of this research were collected through observation, interview, and documentation. This research was a naturalistic study. The result shows that the syllabus used in Writing I & II is grammatical syllabus and Writing III & IV task-based syllabus. The learning objectives categorized into two namely, general objectives and specific objectives. The instructional materials were divided into three categories: printed materials, visual materials, and materials from the internet. The teachers’ roles were as organizer, consultant, feedback provider, assessor, and motivator. The students’ roles were as active participant, peer reviewer, and peer editor. The classroom techniques consist of brainstorming, discussion, question and answer, self-correction, assignment. The classroom procedures of Writing I & II were BKOF-MOT-ICOT; Writing III were reviewing, gathering ideas, organizing, build writing activity; and Writing IV were reviewing, explaining the materials, gathering ideas, organizing, build writing activity. The media used were LCD Projector, board, slides, and videos. The assessment model consisted of: multiple choices, weekly assignments, quizzes, mid-test, and final-test.     Keywords: Instruction, writing course, teaching writing

  8. Analysis of quench in the NHMFL REBCO prototype coils for the 32 T Magnet Project

    International Nuclear Information System (INIS)

    Breschi, M; Cavallucci, L; Ribani, P L; Gavrilin, A V; Weijers, H W

    2016-01-01

    A 32 T all-superconductive magnet with high field REBCO inner coils is under development at the National High Magnetic Field Laboratory, Tallahassee, Florida, USA. As part of the development activity, two prototype coils with full scale radial dimensions and final design features, but with reduced axial length were constructed. The prototype coils consist of six dry-wound double pancakes modules with uninsulated conductor and insulated stainless steel cowind. Quench studies on one of the prototype coils at 4.2 K in self-field and in a background magnetic field of 15 T were performed by activating a set of quench protection heaters. In this paper, we present a numerical analysis of the experimental results of the quench tests of one of the prototype coils. The numerical analysis was carried out through a coupled electro-thermal FEM model developed at the University of Bologna. The model is based on the coupling with distributed contact resistances of the coil pancakes described as 2D elements. A homogenization procedure of the REBCO tape and other coil materials is presented, which allows reducing the number of degrees of freedom and the computational effort. The model is applied to the analysis of the current and voltage evolutions during the experimental quench tests on the prototype coil. (paper)

  9. Paperwork Plus: Literacy Materials for the Service Industry. Hotel Edition.

    Science.gov (United States)

    Bond, Judith; McGill, Teresa

    The instructional materials are intended for use in teaching vocational English and English literacy to limited-English-speaking personnel in the hotel industry. They are designed for learners at three instructional levels, and address job-specific literacy tasks. An introductory section describes the materials and offers suggestions for…

  10. Masonry. Teacher's Guide. Building Maintenance Units of Instruction.

    Science.gov (United States)

    Barnes, Bill

    This teaching guide on masonry building maintenance, one in a series of six publications designed for building maintenance instructors in Texas, is designed to give students an understanding of masonry construction. Introductory material provides teachers with information on use of the units of instruction and personalization and localization of…

  11. Online faculty development for creating E-learning materials.

    Science.gov (United States)

    Niebuhr, Virginia; Niebuhr, Bruce; Trumble, Julie; Urbani, Mary Jo

    2014-01-01

    Faculty who want to develop e-learning materials face pedagogical challenges of transforming instruction for the online environment, especially as many have never experienced online learning themselves. They face technical challenges of learning new software and time challenges of not all being able to be in the same place at the same time to learn these new skills. The objective of the Any Day Any Place Teaching (ADAPT) faculty development program was to create an online experience in which faculty could learn to produce e-learning materials. The ADAPT curriculum included units on instructional design, copyright principles and peer review, all for the online environment, and units on specific software tools. Participants experienced asynchronous and synchronous methods, including a learning management system, PC-based videoconferencing, online discussions, desktop sharing, an online toolbox and optional face-to-face labs. Project outcomes were e-learning materials developed and participants' evaluations of the experience. Likert scale responses for five instructional units (quantitative) were analyzed for distance from neutral using one-sample t-tests. Interview data (qualitative) were analyzed with assurance of data trustworthiness and thematic analysis techniques. Participants were 27 interprofessional faculty. They evaluated the program instruction as easy to access, engaging and logically presented. They reported increased confidence in new skills and increased awareness of copyright issues, yet continued to have time management challenges and remained uncomfortable about peer review. They produced 22 new instructional materials. Online faculty development methods are helpful for faculty learning to create e-learning materials. Recommendations are made to increase the success of such a faculty development program.

  12. The OPAL vertex detector prototype

    International Nuclear Information System (INIS)

    Roney, J.M.; Armitage, J.C.; Carnegie, R.K.; Giles, G.L.; Hemingway, R.J.; McPherson, A.C.; Pinfold, J.L.; Waterhouse, J.; Godfrey, L.; Hargrove, C.K.

    1989-01-01

    The prototype test results of a high resolution charged particle tracking detector are reported. The detector is designed to measure vertex topologies of particles produced in the e + e - collisions of the OPAL experiment at LEP. The OPAL vertex detector is a 1 m long, 0.46 m diameter cylindrical drift chamber consisting of an axial and stereo layer each of which is divided into 36 jet cells. A prototype chamber containing four axial and two stereo cells was studied using a pion test beam at CERN. The studies examined the prototype under a variety of operating conditions. An r-Φ resolution of 60 μm was obtained when the chamber was operated with argon (50%)-ethane (50%) at 3.75 bar, and when CO 2 (80%)-isobutane (20%) at 2.5 bar was used a 25 μm resolution was achieved. A z measurement using end-to-end time difference has a resolution of 3.5 cm. The details of these prototype studies are discussed in this paper. (orig.)

  13. Rule-based emergency action level monitor prototype

    International Nuclear Information System (INIS)

    Touchton, R.A.; Gunter, A.D.; Cain, D.

    1985-01-01

    In late 1983, the Electric Power Research Institute (EPRI) began a program to encourage and stimulate the development of artificial intelligence (AI) applications for the nuclear industry. Development of a rule-based emergency action level classification system prototype is discussed. The paper describes both the full prototype currently under development and the completed, simplified prototype

  14. An Empirical Investigation of Architectural Prototyping

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2010-01-01

    Architectural prototyping is the process of using executable code to investigate stakeholders’ software architecture concerns with respect to a system under development. Previous work has established this as a useful and cost-effective way of exploration and learning of the design space of a system...... and in addressing issues regarding quality attributes, architectural risks, and the problem of knowledge transfer and conformance. However, the actual industrial use of architectural prototyping has not been thoroughly researched so far. In this article, we report from three studies of architectural prototyping...... in practice. First, we report findings from an ethnographic study of practicing software architects. Secondly, we report from a focus group on architectural prototyping involving architects from four companies. And, thirdly, we report from a survey study of 20 practicing software architects and software...

  15. Rapid Prototyping and the Human Factors Engineering Process

    Science.gov (United States)

    2016-08-29

    conventional systems development techniques. It is not clear, however, exactly how rapid prototyping could be used in relation to conventional human...factors engineering analyses. Therefore, an investigation of the use of the V APS virtual prototyping system was carried out in five organizations. The...results show that a variety of task analysis approaches can be used to initiate rapid prototyping . Overall, it appears that rapid prototyping

  16. LEARNING MATERIALS SELECTION FOR DIFFERENTIATED INSTRUCTION OF ENGLISH FOR SPECIFIC PURPOSES OF FUTURE PROFESSIONALS IN THE FIELD OF INFORMATION TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Oksana Synekop

    2017-09-01

    formation of competencies in listening, speaking, reading and writing of English for Specific Purposes is determined. So, the defined learning material selection will serve as a basis for consideration of stages in the differentiated instruction of English for Specific Purposes of future professionals in the field of information technology at university level.

  17. From prototype to product

    DEFF Research Database (Denmark)

    Andersen, Tariq Osman; Bansler, Jørgen P.; Kensing, Finn

    2017-01-01

    This paper delves into the challenges of engaging patients, clinicians and industry stakeholders in the participatory design of an mHealth platform for patient-clinician collaboration. It follows the process from the development of a research prototype to a commercial software product. In particu......This paper delves into the challenges of engaging patients, clinicians and industry stakeholders in the participatory design of an mHealth platform for patient-clinician collaboration. It follows the process from the development of a research prototype to a commercial software product....... In particular, we draw attention to four major challenges of (a) aligning the different concerns of patients and clinicians, (b) designing according to clinical accountability, (c) ensuring commercial interest, and (d) dealing with regulatory constraints when prototyping safety critical health Information...... Technology. Using four illustrative cases, we discuss what these challenges entail and the implications they pose to Participatory Design. We conclude the paper by presenting lessons learned....

  18. Virtual Video Prototyping of Pervasive Healthcare Systems

    DEFF Research Database (Denmark)

    Bardram, Jakob Eyvind; Bossen, Claus; Madsen, Kim Halskov

    2002-01-01

    Virtual studio technology enables the mixing of physical and digital 3D objects and thus expands the way of representing design ideas in terms of virtual video prototypes, which offers new possibilities for designers by combining elements of prototypes, mock-ups, scenarios, and conventional video....... In this article we report our initial experience in the domain of pervasive healthcare with producing virtual video prototypes and using them in a design workshop. Our experience has been predominantly favourable. The production of a virtual video prototype forces the designers to decide very concrete design...... issues, since one cannot avoid paying attention to the physical, real-world constraints and to details in the usage-interaction between users and technology. From the users' perspective, during our evaluation of the virtual video prototype, we experienced how it enabled users to relate...

  19. Learning and performance under alternative instructional manifestations of experimental practice

    Science.gov (United States)

    Ford, Michael J.

    Before we can understand how students learn "to do" science, we must make explicit our assumptions about what scientific practice is. This study compares the learning outcomes of two sixth-grade instructional units on experimentation, each based on a particular characterization of practice. In one unit, instruction focused on acquisition and application of the control of variables strategy (CVS; Chen & Klahr, 1999), which is consistent with a popular conception of science education, stemming from Piaget, as the mastery of logical forms. In the other unit, students designed experimental apparatus to answer a target question, and instruction emphasized practices of rendering and transforming the material world in ways that support scientific understanding. Students in both groups were assessed for CVS acquisition and subsequent experimental performance on a novel task, and group performances on these assessments different across instructional conditions. I will argue that student understandings of goals, norms of instructional expectation, and strategies explain these differences, in some cases by supporting performance and in other cases by hindering it. I will also argue that the results question the role typically attributed to logical method in learning to design experiments.

  20. Comic Books' Latest Plot Twist: Enhancing Literacy Instruction

    Science.gov (United States)

    Rapp, David N.

    2011-01-01

    Recently, support has grown for using comic books and graphic novels to enhance and support literacy instruction. In some ways, it's surprising that the medium has only recently enjoyed such support. Stereotyped views of comics as unsophisticated, disposable entertainment or material written to the lowest common denominator fail to consider the…

  1. THE USE OF RESEARCH PAPER WRITING INSTRUCTIONAL MATERIALSTO IMPROVE STUDENTS‟ACADEMIC WRITING: A CLASSROOM ACTION RESEARCH

    Directory of Open Access Journals (Sweden)

    M. Ali Ghufron

    2017-04-01

    Full Text Available Most of students in English Education Department of IKIP PGRI Bojonegoro frequently consider that academic writing, in term of writing scientific paper, is not easy task to do. The result of their academic writing performance at preliminary research indicated that they achieved low scores in writing a scientific article. Consequently, they are not motivated in academic writing. For this case, I used Research Paper Writing Instructional Materials as sources in teaching and learning. This research investigatedwhether the use of Research Paper Writing Instructional Materials can improve students‘ academic writing andhow class situation is when Research Paper Writing Instructional Materials are used as a source of teaching and learning process. This is a Classroom Action Research (CAR which is conducted at the fourth semester students of English Education Department of IKIP PGRI Bojonegoro in the academic year of 2014/2015. This research was done in two cycles. Each cycle consisted of four steps: Planning, Acting, Observing, and Reflecting. The qualitative data were collected through observation and interview. The quantitative data were collected through test. The research findings revealed that the use of Research Paper Writing Instructional Materialscan improve students‘ academic writing and improve students‘ motivation in academic writing class.Derived from the findings, it can be concluded that the use of Research Paper Writing Instructional Materialscan improve students‘ academic writing and class situation. Therefore, it is recommended for the lecturers to use Research Paper Writing Instructional Materialsas it can improve students‘ academic writing as well as class situation.

  2. Automated pictographic illustration of discharge instructions with Glyph: impact on patient recall and satisfaction

    Science.gov (United States)

    Perri-Moore, Seneca; Kuang, Jinqiu; Bray, Bruce E; Ngo, Long; Doig, Alexa; Zeng-Treitler, Qing

    2016-01-01

    Objectives First, to evaluate the effect of standard vs pictograph-enhanced discharge instructions on patients’ immediate and delayed recall of and satisfaction with their discharge instructions. Second, to evaluate the effect of automated pictograph enhancement on patient satisfaction with their discharge instructions. Materials and Methods Glyph, an automated healthcare informatics system, was used to automatically enhance patient discharge instructions with pictographs. Glyph was developed at the University of Utah by our research team. Patients in a cardiovascular medical unit were randomized to receive pictograph-enhanced or standard discharge instructions. Measures of immediate and delayed recall and satisfaction with discharge instructions were compared between two randomized groups: pictograph (n = 71) and standard (n = 73). Results Study participants who received pictograph-enhanced discharge instructions recalled 35% more of their instructions at discharge than those who received standard discharge instructions. The ratio of instructions at discharge was: standard = 0.04 ± 0.03 and pictograph-enhanced = 0.06 ± 0.03. The ratio of instructions at 1 week post discharge was: standard = 0.04 ± 0.02 and pictograph-enhanced 0.04 ± 0.02. Additionally, study participants who received pictograph-enhanced discharge instructions were more satisfied with the understandability of their instructions at 1 week post-discharge than those who received standard discharge instructions. Discussion Pictograph-enhanced discharge instructions have the potential to increase patient understanding of and satisfaction with discharge instructions. Conclusion It is feasible to automatically illustrate discharge instructions and provide them to patients in a timely manner without interfering with clinical work. Illustrations in discharge instructions were found to improve patients’ short-term recall of discharge instructions and delayed satisfaction (1-week post hospitalization

  3. Prototyping a Smart City

    DEFF Research Database (Denmark)

    Korsgaard, Henrik; Brynskov, Martin

    In this paper, we argue that by approaching the so-called Smart City as a design challenge, and an interaction design perspective, it is possible to both uncover existing challenges in the interplay between people, technology and society, as well as prototype possible futures. We present a case...... in which we exposed data about the online communication between the citizens and the municipality on a highly visible media facade, while at the same time prototyped a tool that enabled citizens to report ‘bugs’ within the city....

  4. User prototypes as partly unconscious communication

    DEFF Research Database (Denmark)

    Glasemann, Marie; Kanstrup, Anne Marie

    2010-01-01

    In this paper, we introduce user prototypes as a technique that supports users’ articulation of emotions relevant for design: dreams, fears, motivations – their feelings and aspirations. Following Bateson’s writings about communication through art, we consider user prototypes as “partly unconscious...... communication” and propose to analyze them by focusing on the emotional articulations integrated in the users’ design language. We illustrate this with an example from a design research project on designing learning technology for young diabetics. The example shows how young people with diabetes can express...... emotional themes related to youth identity, the burden of being young with a chronic illness, and the need to be connected and feel safe through design of prototypes. The new conceptual space that arises from user prototypes shows potential for addressing emotions when designing for health and for further...

  5. Usage of Microsoft Kinect for augmented prototyping speed-up

    Directory of Open Access Journals (Sweden)

    Jaromír Landa

    2012-01-01

    Full Text Available Physical model is a common tool for testing of the product features during the design process. This model is usually made of clay or plastic because of the modifiability of these materials. Therefore, the designer could easily adjust the model shape to enhance the look or ergonomics of the product. Nowadays, some companies use augmented reality to enhance their design process. This concept is called augmented prototyping. Common approach uses artificial markers to augment the product prototype by digital 3D models. These 3D models that are shown on the markers positions can represent e.g. car spare parts such as different lights, wheels, spoiler etc. This allows the designer interactively change the look of the physical model. Further, it is also necessary to transfer physical adjustments made on the model surface back to the computer digital model. Well-known tool for this purpose a professional 3D scanner. Nevertheless, the cost of such scanner is substantial. Therefore, we focused on different solution – a motion capture device Microsoft Kinect that is used for computer games. This article outlines a new augmented prototyping approach that directly updates the digital model during the design process using Kinect depth camera. This solution is a cost effective alternative to the professional 3D scanners. Our article describes especially how depth data can be obtained by the Kinect and also provides an evaluation of depth measurement precision.

  6. Life-Cycle Assessment of Prototype Unit of Emergency Housing. The search for the zero impact

    Directory of Open Access Journals (Sweden)

    J. M. Ros García

    2017-09-01

    Full Text Available Prototype Unit of Emergency Housing (PUEH is the result of the Applied Research Project VEM (Military Emergency Housing developed in collaboration with Escuela Politécnica Superior (Universidad CEU and the company Air-bus Defense & Space. It is designed as a modular and industrialized unit of basic habitability, with programmed and expandable growth, designed to provide shelter and protection in environments of humanitarian crises or contingencies of social vulnerability in order to ensure sustainable habitat for emergencies.The influence of the construction processes and materials involved in the manufacture of this PUEH have on the environment, analyzed using the methodology of life-cycle assessment (LCA, considered especially critical recycling the mate-rials used. Thus, in order to reduce the environmental impact environmental, each of the component parts of the developed prototype unit are quantified, evaluating the benefits resulting from the methodology DfMA (Design for Manufacturing and Assembly.

  7. 47 CFR 32.26 - Materiality.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Materiality. 32.26 Section 32.26... FOR TELECOMMUNICATIONS COMPANIES General Instructions § 32.26 Materiality. Companies shall follow this... materiality under GAAP, unless a waiver has been granted under the provisions of § 32.18 of this subpart to do...

  8. NIF/LMJ prototype amplifier mechanical design

    International Nuclear Information System (INIS)

    Horvath, J.

    1996-10-01

    Amplifier prototypes for the National Ignition Facility and the Laser Megajoule will be tested at Lawrence Livermore National Laboratory. The prototype amplifier, which is an ensemble of modules from LLNL and Centre d'Etudes de Limeil-Valenton, is cassette-based with bottom access for maintenance. A sealed maintenance transfer vehicle which moves optical cassettes between the amplifier and the assembly cleanroom, and a vacuum gripper which holds laser slabs during cassette assembly will also be tested. The prototype amplifier will be used to verify amplifier optical performance, thermal recovery time, and cleanliness of mechanical operations

  9. Entomology: A Catalog of Instructional Materials.

    Science.gov (United States)

    Rutschky, Charles W.

    This reference book provides information on all types of materials for teaching and studying entomology. The first section contains: a list of books organized by subject and arranged alphabetically by author; lists of booklets, offprints, and pamphlets on various entomological topics; sources of equipment, live insects, and titles of laboratory…

  10. Rapid Prototyping Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The ARDEC Rapid Prototyping (RP) Laboratory was established in December 1992 to provide low cost RP capabilities to the ARDEC engineering community. The Stratasys,...

  11. Multimedia instructions for carriers of radioactive material

    International Nuclear Information System (INIS)

    Sahyun, A.; Sordi, G. M.; Simpson, J.; Ghobril, C. N.; Perez, C. F.

    2014-08-01

    For some operators the transport regulations for transporting radioactive material are considered to be complicated and not user friendly and as a result for some operators it is difficult to identify all the transport regulatory requirements they must comply with for each type of package or radioactive material. These difficulties can result in self-checking being ineffective and as a consequence the first and important step in the safety chain is lost. This paper describes a transport compliance guide for operators that is currently under development for the South American market. This paper describes the scope and structure of the guide and examples of the information provided is given, which will be available in English, Portuguese and Spanish. It is intended that when the guide is launched before the end of 2013 it will be accessed using a bespoke software program that can run on Pc platform to provide a checklist for the operator before the shipment begins By identifying the regulatory requirements the guide is also intended to provide operators with an understanding of the structure of the transport regulations and an appreciation of the logic behind the regulatory requirements for each Un numbered package and material type listed in the transport regulations for radioactive material. It is foreseen that the interactive program can be used both operationally on a day-to-day basis and as a training tool, including refresher training, as the guide will be updated when the transport regulations are periodically changed. (Author)

  12. Multimedia instructions for carriers of radioactive material

    Energy Technology Data Exchange (ETDEWEB)

    Sahyun, A.; Sordi, G. M. [Instituto de Pesquisas Energeticas e Nucleares, Av. Prof. Lineu Prestes 2242, Cidade Universitaria, 05508-000 Sao Paulo (Brazil); Simpson, J. [Class 7 Limited, 9 Irk Vale Drive, Chadderton, Oldham OL1 2TW (United Kingdom); Ghobril, C. N. [Governo de Sao Paulo, Instituto de Economia Agricola, 04301-903 Sao Paulo (Brazil); Perez, C. F., E-mail: adelia@atomo.com.br [Centro Tecnologico da Marinha em Sao Paulo, Av. Prof. Lineu Prestes 2468, Cidade Universitaria, 05508-000 Sau Paulo (Brazil)

    2014-08-15

    For some operators the transport regulations for transporting radioactive material are considered to be complicated and not user friendly and as a result for some operators it is difficult to identify all the transport regulatory requirements they must comply with for each type of package or radioactive material. These difficulties can result in self-checking being ineffective and as a consequence the first and important step in the safety chain is lost. This paper describes a transport compliance guide for operators that is currently under development for the South American market. This paper describes the scope and structure of the guide and examples of the information provided is given, which will be available in English, Portuguese and Spanish. It is intended that when the guide is launched before the end of 2013 it will be accessed using a bespoke software program that can run on Pc platform to provide a checklist for the operator before the shipment begins By identifying the regulatory requirements the guide is also intended to provide operators with an understanding of the structure of the transport regulations and an appreciation of the logic behind the regulatory requirements for each Un numbered package and material type listed in the transport regulations for radioactive material. It is foreseen that the interactive program can be used both operationally on a day-to-day basis and as a training tool, including refresher training, as the guide will be updated when the transport regulations are periodically changed. (Author)

  13. Braille Literacy: Resources for Instruction, Writing Equipment, and Supplies. NLS Reference Circulars

    Science.gov (United States)

    Peaco, Freddie L., Comp.

    2004-01-01

    This reference circular lists instructional materials, supplies, and equipment currently available for learning braille, and cites sources about braille literacy. The resources given are intended to assist sighted individuals who are interested in learning braille or want to transcribe print materials into braille; instructors who teach braille;…

  14. Additive manufacturing technologies 3D printing, rapid prototyping, and direct digital manufacturing

    CERN Document Server

    Gibson, Ian; Stucker, Brent

    2015-01-01

    This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given,  beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered  

  15. Frontiers in Materials Science and Technology

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    Tailored materials and innovative designs of products are the key drivers in many modern ... affordable multistage processing and manufacturing technologies. ..... large-scale production of micro components of a wide range of materials are described in ... rapid prototyping with accurate and flexible ceramic manufacture by ...

  16. The Instructional Capacitor

    Science.gov (United States)

    Walton, Elizabeth

    2012-01-01

    Many administrators are so overwhelmed by the basic responsibilities of their daily work that there seems to be little or no time left for providing quality leadership in instruction. Instead, schools employ department chairs, instructional specialists, and coordinators to provide instructional leadership. How can administrators find time in the…

  17. Strategy Instruction in Mathematics.

    Science.gov (United States)

    Goldman, Susan R.

    1989-01-01

    Experiments in strategy instruction for mathematics have been conducted using three models (direct instruction, self-instruction, and guided learning) applied to the tasks of computation and word problem solving. Results have implications for effective strategy instruction for learning disabled students. It is recommended that strategy instruction…

  18. 16 CFR 1633.5 - Prototype pooling and confirmation testing requirements.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Prototype pooling and confirmation testing... Prototype pooling and confirmation testing requirements. (a) Prototype pooling. One or more manufacturers may rely on a qualified prototype produced by another manufacturer or prototype developer provided...

  19. Brief, cooperative peer-instruction sessions during lectures enhance student recall and comprehension*

    Science.gov (United States)

    Zhang, Niu; Henderson, Charles N.R.

    2016-01-01

    Objective: The objective of this study was to evaluate the academic impact of cooperative peer instruction during lecture pauses in an immunology/endocrinology course. Methods: Third-quarter students participated across iterations of the course. Each class offered 20 lectures of 50 minutes each. Classes were divided into a peer-instruction group incorporating cooperative peer instruction and a control group receiving traditional lectures. Peer-instruction group lectures were divided into 2–3 short presentations followed by a multiple-choice question (MCQ). Students recorded an initial answer and then had 1 minute to discuss answers with group peers. Following this, students could submit a revised answer. The control group received the same lecture material, but without MCQs or peer discussions. Final-exam scores were compared across study groups. A mixed-design analysis of covariance was used to analyze the data. Results: There was a statistically significant main effect for the peer-instruction activity (F(1, 93) = 6.573, p = .012, r = .257), with recall scores higher for MCQs asked after peer-instruction activities than for those asked before peer instruction. Final-exam scores at the end of term were greater in the peer-instruction group than the control group (F(1, 193) = 9.264, p = .003, r = .214; question type, F(1, 193) = 26.671, p = .000, r = .348). Conclusion: Lectures with peer-instruction pauses increase student recall and comprehension compared with traditional lectures. PMID:26967766

  20. ABOUT MODERN TECHNICAL GRAPHICS USING IN THE VIRTUAL PROTOTYPING

    OpenAIRE

    GHERGHINA George; POPA Dragos; BOGDAN Mihaela; GLUGA Cristian

    2008-01-01

    The paper presents aspects concerning the using of modern technical graphics elements in the virtual prototyping. The virtual prototyping is a process which uses a virtual prototype in place of physical prototype for the testing and the evaluation of specific features of designed product. The virtual prototype is created by computer such as it could assign the specific features as close as possible to the real conditions which permit its function simulation in the conditions for which is desi...

  1. Prototype ion source for JT-60 neutral beam injectors

    International Nuclear Information System (INIS)

    Akiba, M.

    1981-01-01

    A prototype ion source for JT-60 neutral beam injectors has been fabricated and tested. Here, we review the construction of the prototype ion source and report the experimental results about the source characteristics that has been obtained at this time. The prototype ion source is now installed at the prototype unit of JT-60 neutral beam injection units and the demonstration of the performances of the ion source and the prototype unit has just started

  2. Assessment of readability, understandability, and completeness of pediatric hospital medicine discharge instructions.

    Science.gov (United States)

    Unaka, Ndidi I; Statile, Angela; Haney, Julianne; Beck, Andrew F; Brady, Patrick W; Jerardi, Karen E

    2017-02-01

    The average American adult reads at an 8th-grade level. Discharge instructions written above this level might increase the risk of adverse outcomes for children as they transition from hospital to home. We conducted a cross-sectional study at a large urban academic children's hospital to describe readability levels, understandability scores, and completeness of written instructions given to families at hospital discharge. Two hundred charts for patients discharged from the hospital medicine service were randomly selected for review. Written discharge instructions were extracted and scored for readability (Fry Readability Scale [FRS]), understandability (Patient Education Materials Assessment Tool [PEMAT]), and completeness (5 criteria determined by consensus). Descriptive statistics enumerated the distribution of readability, understandability, and completeness of written discharge instructions. Of the patients included in the study, 51% were publicly insured. Median age was 3.1 years, and median length of stay was 2.0 days. The median readability score corresponded to a 10th-grade reading level (interquartile range, 8-12; range, 1-13). Median PEMAT score was 73% (interquartile range, 64%-82%; range, 45%-100%); 36% of instructions scored below 70%, correlating with suboptimal understandability. The diagnosis was described in only 33% of the instructions. Although explicit warning signs were listed in most instructions, 38% of the instructions did not include information on the person to contact if warning signs developed. Overall, the readability, understandability, and completeness of discharge instructions were subpar. Efforts to improve the content of discharge instructions may promote safe and effective transitions home. Journal of Hospital Medicine 2017;12:98-101. © 2017 Society of Hospital Medicine.

  3. Application of Rapid Prototyping Methods to High-Speed Wind Tunnel Testing

    Science.gov (United States)

    Springer, A. M.

    1998-01-01

    This study was undertaken in MSFC's 14-Inch Trisonic Wind Tunnel to determine if rapid prototyping methods could be used in the design and manufacturing of high speed wind tunnel models in direct testing applications, and if these methods would reduce model design/fabrication time and cost while providing models of high enough fidelity to provide adequate aerodynamic data, and of sufficient strength to survive the test environment. Rapid prototyping methods utilized to construct wind tunnel models in a wing-body-tail configuration were: fused deposition method using both ABS plastic and PEEK as building materials, stereolithography using the photopolymer SL-5170, selective laser sintering using glass reinforced nylon, and laminated object manufacturing using plastic reinforced with glass and 'paper'. This study revealed good agreement between the SLA model, the metal model with an FDM-ABS nose, an SLA nose, and the metal model for most operating conditions, while the FDM-ABS data diverged at higher loading conditions. Data from the initial SLS model showed poor agreement due to problems in post-processing, resulting in a different configuration. A second SLS model was tested and showed relatively good agreement. It can be concluded that rapid prototyping models show promise in preliminary aerodynamic development studies at subsonic, transonic, and supersonic speeds.

  4. Prototype design based on NX subdivision modeling application

    Science.gov (United States)

    Zhan, Xianghui; Li, Xiaoda

    2018-04-01

    Prototype design is an important part of the product design, through a quick and easy way to draw a three-dimensional product prototype. Combined with the actual production, the prototype could be modified several times, resulting in a highly efficient and reasonable design before the formal design. Subdivision modeling is a common method of modeling product prototypes. Through Subdivision modeling, people can in a short time with a simple operation to get the product prototype of the three-dimensional model. This paper discusses the operation method of Subdivision modeling for geometry. Take a vacuum cleaner as an example, the NX Subdivision modeling functions are applied. Finally, the development of Subdivision modeling is forecasted.

  5. Prototyping of automotive components with variable width and depth

    Science.gov (United States)

    Abeyrathna, B.; Rolfe, B.; Harrasser, J.; Sedlmaier, A.; Ge, Rui; Pan, L.; Weiss, M.

    2017-09-01

    Roll forming enables the manufacturing of longitudinal components from materials that combine high strength with limited formability and is increasingly used in the automotive industry for the manufacture of structural and crash components. An extension of conventional roll forming is the Flexible Roll Forming (FRF) process where the rolls are no longer fixed in space but are free to move which enables the forming of components with variable cross section over the length of the part. Even though FRF components have high weight saving potential the technology has found only limited application in the automotive industry. A new flexible forming facility has recently been developed that enables proof of concept studies and the production of FRF prototypes before a full FRF line is built; this may lead to a wider uptake of the FRF technology in the automotive industry. In this process, the pre-cut blank is placed between two clamps and the whole set up moves back and forth; a forming roll that is mounted on a servo-controlled platform with six degrees of freedom forms the pre-cut blank to the desired shape. In this study an initial forming concept for the flexible roll forming of an automotive component with variable height is developed using COPRA® FEA RF. This is followed by performing experimental prototyping studies on the new concept forming facility. Using the optical strain measurement system Autogrid Compact, material deformation, part shape and wrinkling severity are analysed for some forming passes and compared with the numerical results. The results show that the numerical model gives a good representation of material behaviour and that with increasing forming severity wrinkling issues need to be overcome in the process.

  6. The pedagogy of argumentation in science education: science teachers' instructional practices

    Science.gov (United States)

    Özdem Yilmaz, Yasemin; Cakiroglu, Jale; Ertepinar, Hamide; Erduran, Sibel

    2017-07-01

    Argumentation has been a prominent concern in science education research and a common goal in science curriculum in many countries over the past decade. With reference to this goal, policy documents burden responsibilities on science teachers, such as involving students in dialogues and being guides in students' spoken or written argumentation. Consequently, teachers' pedagogical practices regarding argumentation gain importance due to their impact on how they incorporate this practice into their classrooms. In this study, therefore, we investigated the instructional strategies adopted by science teachers for their argumentation-based science teaching. Participants were one elementary science teacher, two chemistry teachers, and four graduate students, who have a background in science education. The study took place during a graduate course, which was aimed at developing science teachers' theory and pedagogy of argumentation. Data sources included the participants' video-recorded classroom practices, audio-recorded reflections, post-interviews, and participants' written materials. The findings revealed three typologies of instructional strategies towards argumentation. They are named as Basic Instructional Strategies for Argumentation, Meta-level Instructional ‌St‌‌rategies for ‌Argumentation, and Meta-strategic Instructional ‌St‌‌rategies for ‌Argumentation. In conclusion, the study provided a detailed coding framework for the exploration of science teachers' instructional practices while they are implementing argumentation-based lessons.

  7. Prototyping SOS meta-theory in Maude

    NARCIS (Netherlands)

    Mousavi, M.R.; Reniers, M.A.; Mosses, P.D.; Ulidowski, I.

    2006-01-01

    We present a prototype implementation of SOS meta-theory in the Maude term rewriting language. The prototype defines the basic concepts of SOS meta-theory (e.g., transition formulae, deduction rules and transition system specifications) in Maude. Besides the basic definitions, we implement methods

  8. Teacher's Guide to Imagination Unlimited. The MATCH Book Project; Prototype Edition.

    Science.gov (United States)

    Williams, Susan; Williamson, Sharon

    The idea of this box of multimedia instructional materials is to surround the children with curious and wonderful objects and experiences which will stimulate them to self-expression. The kit provides a set of unusual objects: two movies about a rainshower, one from a weatherman's point of view and one as seen through the eyes of an artist; a set…

  9. Design of Learning Objects for Concept Learning: Effects of Multimedia Learning Principles and an Instructional Approach

    Science.gov (United States)

    Chiu, Thomas K. F.; Churchill, Daniel

    2016-01-01

    Literature suggests using multimedia learning principles in the design of instructional material. However, these principles may not be sufficient for the design of learning objects for concept learning in mathematics. This paper reports on an experimental study that investigated the effects of an instructional approach, which includes two teaching…

  10. Fabrication of small mock-ups reflecting the design features of the ITER semi-prototype

    International Nuclear Information System (INIS)

    Jung, Yang-Il; Choi, Byoung-Kwon; Park, Jeong-Yong; Kim, Suk-Kwon; Lee, Dong Won; Kim, Byoung Yoon

    2012-01-01

    The ITER semi-prototype was designed to qualify the manufacturing technology for the ITER blanket first wall. However, its fabrication is expected to face great difficulty due to a design complexity. Even though joining technology for different materials such as beryllium, CuCrZr, and stainless steel (SS) was developed during the first stage of qualification, the joining is still a key issue for the fabrication of the semi-prototype. In this study, small mock-ups (SMU) were fabricated to realize and verify the manufacturing of the semi-prototype reflecting the described design features. The joining of multiple beryllium tiles on the angled CuCrZr surface was confirmed with SMU no. 1. Six beryllium tiles were joined using hot isostatic pressing (HIP), and slitting was then performed to form multiple tiles. In SMU no. 2, HIP was performed two times in order to facilitate the cooling channels at the CuCrZr/SS interface, and to join the beryllium tiles on CuCrZr/SS. The method used to form a pressure boundary for the complex cooling channels was also developed by fabricating the SMU no. 3. The SMUs confirmed the applicability of the HIP for the manufacturing of the semi-prototype.

  11. Validity of "Hi_Science" as instructional media based-android refer to experiential learning model

    Science.gov (United States)

    Qamariah, Jumadi, Senam, Wilujeng, Insih

    2017-08-01

    Hi_Science is instructional media based-android in learning science on material environmental pollution and global warming. This study is aimed: (a) to show the display of Hi_Science that will be applied in Junior High School, and (b) to describe the validity of Hi_Science. Hi_Science as instructional media created with colaboration of innovative learning model and development of technology at the current time. Learning media selected is based-android and collaborated with experiential learning model as an innovative learning model. Hi_Science had adapted student worksheet by Taufiq (2015). Student worksheet had very good category by two expert lecturers and two science teachers (Taufik, 2015). This student worksheet is refined and redeveloped in android as an instructional media which can be used by students for learning science not only in the classroom, but also at home. Therefore, student worksheet which has become instructional media based-android must be validated again. Hi_Science has been validated by two experts. The validation is based on assessment of meterials aspects and media aspects. The data collection was done by media assessment instrument. The result showed the assessment of material aspects has obtained the average value 4,72 with percentage of agreement 96,47%, that means Hi_Science on the material aspects is in excellent category or very valid category. The assessment of media aspects has obtained the average value 4,53 with percentage of agreement 98,70%, that means Hi_Science on the media aspects is in excellent category or very valid category. It was concluded that Hi_Science as instructional media can be applied in the junior high school.

  12. Prototype of industrial electrons accelerator

    International Nuclear Information System (INIS)

    Lopez, V.H.; Valdovinos, A.M.

    1992-01-01

    The interest and the necessity of Mexico's industry in the use of irradiation process has been increased in the last years. As examples are the irradiation of combustion gases (elimination of NO x and SO 2 ) and the polymer cross-linking between others. At present time at least twelve enterprises require immediately of them which have been contacted by electron accelerators suppliers of foreign countries. The first project step consisted in to identify the electrons accelerator type that in can be constructed in Mexico with the major number of possible equipment, instruments, components and acquisition materials local and useful for the major number of users. the characteristics of the accelerator prototype are: accelerator type transformer with multiple secondary insulated and rectifier circuits with a potential of 0.8 MV of voltage, the second step it consisted in an economic study that permitted to demonstrate the economic feasibility of its construction. (Author)

  13. ABOUT MODERN TECHNICAL GRAPHICS USING IN THE VIRTUAL PROTOTYPING

    Directory of Open Access Journals (Sweden)

    GHERGHINA George

    2008-07-01

    Full Text Available The paper presents aspects concerning the using of modern technical graphics elements in the virtual prototyping. The virtual prototyping is a process which uses a virtual prototype in place of physical prototype for the testing and the evaluation of specific features of designed product. The virtual prototype is created by computer such as it could assign the specific features as close as possible to the real conditions which permit its function simulation in the conditions for which is designed. The virtual prototyping permits the replacing of classical design process, although, and the elaboration of graphicalm documentation, which represent an important work volume – with CAD/CAM systems in the increased efficiency conditions.

  14. A prototype for JDEM science data processing

    International Nuclear Information System (INIS)

    Gottschalk, Erik E

    2011-01-01

    Fermilab is developing a prototype science data processing and data quality monitoring system for dark energy science. The purpose of the prototype is to demonstrate distributed data processing capabilities for astrophysics applications, and to evaluate candidate technologies for trade-off studies. We present the architecture and technical aspects of the prototype, including an open source scientific execution and application development framework, distributed data processing, and publish/subscribe message passing for quality control.

  15. Prototype calorimeters for the NA3 experiment

    CERN Multimedia

    1975-01-01

    The NA3 Experiment was set-up on the North Area of the SPS by the CERN/ Ecole Polytechnique/College de France/ Orsay/Saclay Collaboration, to study high transverse momentum leptons and hadrons from hadron collisions. The calorimeters measured the energy of hadrons (prototype on the right) and leptons (prototype on the left). They used a new type of plastic scintillator (plexipop). (see CERN Courier of November 1975) energy (prototype on the right)

  16. Rapid prototyping using CBCT: an initial experience

    International Nuclear Information System (INIS)

    Yovchev, D.; Deliverska, E.; Indjova, J.; Ugrinov, R.

    2011-01-01

    This report presents a case of fibrous dysplasia in the left lower jaw of a 12-year-old girl, scanned with CBCT. On the basis of CBCT scan a model of affected jaw was produced using a rapid-prototyping three-dimensional printer. The case demonstrates the possibility to get a prototype by CBCT data. Prototypes can be used to support the diagnosis, planning, training (students and postgraduates) and to obtain informed consent from the patient.

  17. Development of a prototype of a candidate camera payload

    OpenAIRE

    Oltedal, Jon Kalevi

    2016-01-01

    The second prototype for the NUTS camera module have been tested to confirm if changes made from the first prototype were successful. The first prototype suffered from noise issues when operating at the maximum clock frequency of 96MHz. This needed to be fixed for the MT9P031 image sensor to be usable in further designs. Debugging and testing using the camera prototype hardware and software proved that the prototype managed to produce noise free images with bright parts in the images. These r...

  18. Development of prototype induced-fission-based Pu accountancy instrument for safeguards applications.

    Science.gov (United States)

    Seo, Hee; Lee, Seung Kyu; An, Su Jung; Park, Se-Hwan; Ku, Jeong-Hoe; Menlove, Howard O; Rael, Carlos D; LaFleur, Adrienne M; Browne, Michael C

    2016-09-01

    Prototype safeguards instrument for nuclear material accountancy (NMA) of uranium/transuranic (U/TRU) products that could be produced in a future advanced PWR fuel processing facility has been developed and characterized. This is a new, hybrid neutron measurement system based on fast neutron energy multiplication (FNEM) and passive neutron albedo reactivity (PNAR) methods. The FNEM method is sensitive to the induced fission rate by fast neutrons, while the PNAR method is sensitive to the induced fission rate by thermal neutrons in the sample to be measured. The induced fission rate is proportional to the total amount of fissile material, especially plutonium (Pu), in the U/TRU product; hence, the Pu amount can be calibrated as a function of the induced fission rate, which can be measured using either the FNEM or PNAR method. In the present study, the prototype system was built using six (3)He tubes, and its performance was evaluated for various detector parameters including high-voltage (HV) plateau, efficiency profiles, dead time, and stability. The system's capability to measure the difference in the average neutron energy for the FNEM signature also was evaluated, using AmLi, PuBe, (252)Cf, as well as four Pu-oxide sources each with a different impurity (Al, F, Mg, and B) and producing (α,n) neutrons with different average energies. Future work will measure the hybrid signature (i.e., FNEM×PNAR) for a Pu source with an external interrogating neutron source after enlarging the cavity size of the prototype system to accommodate a large-size Pu source (~600g Pu). Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Situation and person attributions under spontaneous and intentional instructions: an fMRI study.

    Science.gov (United States)

    Kestemont, Jenny; Vandekerckhove, Marie; Ma, Ning; Van Hoeck, Nicole; Van Overwalle, Frank

    2013-06-01

    This functional magnetic resonance imaging (fMRI) research explores how observers make causal beliefs about an event in terms of the person or situation. Thirty-four participants read various short descriptions of social events that implied either the person or the situation as the cause. Half of them were explicitly instructed to judge whether the event was caused by something about the person or the situation (intentional inferences), whereas the other half was instructed simply to read the material carefully (spontaneous inferences). The results showed common activation in areas related to mentalizing, across all types of causes or instructions (posterior superior temporal sulcus, temporo-parietal junction, precuneus). However, the medial prefrontal cortex was activated only under spontaneous instructions, but not under intentional instruction. This suggests a bias toward person attributions (e.g. fundamental attribution bias). Complementary to this, intentional situation attributions activated a stronger and more extended network compared to intentional person attributions, suggesting that situation attributions require more controlled, extended and broader processing of the information.

  20. Evaluation of an Online Instructional Database Accessed by QR Codes to Support Biochemistry Practical Laboratory Classes

    Science.gov (United States)

    Yip, Tor; Melling, Louise; Shaw, Kirsty J.

    2016-01-01

    An online instructional database containing information on commonly used pieces of laboratory equipment was created. In order to make the database highly accessible and to promote its use, QR codes were utilized. The instructional materials were available anytime and accessed using QR codes located on the equipment itself and within undergraduate…