WorldWideScience

Sample records for prototype graduate level

  1. Rule-based emergency action level monitor prototype

    International Nuclear Information System (INIS)

    Touchton, R.A.; Gunter, A.D.; Cain, D.

    1985-01-01

    In late 1983, the Electric Power Research Institute (EPRI) began a program to encourage and stimulate the development of artificial intelligence (AI) applications for the nuclear industry. Development of a rule-based emergency action level classification system prototype is discussed. The paper describes both the full prototype currently under development and the completed, simplified prototype

  2. The american high school graduation rate : trends and levels

    OpenAIRE

    Heckman, James J.; LaFontaine, Paul A.

    2008-01-01

    This paper uses multiple data sources and a unified methodology to estimate the trends and levels of the U.S. high school graduation rate. Correcting for important biases that plague previous calculations, we establish that (a) the true high school graduation rate is substantially lower than the official rate issued by the National Center for Educational Statistics; (b) it has been declining over the past 40 years; (c) majority/minority graduation rate differentials are substantial and have n...

  3. Community Engagement in a Graduate-Level Community Literacy Course

    Science.gov (United States)

    Marshall Bowen, Lauren; Arko, Kirsti; Beatty, Joel; Delaney, Cindy; Dorpenyo, Isidore; Moeller, Laura; Roberts, Elsa; Velat, John

    2014-01-01

    A case study of a graduate-level community literacy seminar that involved a tutoring project with adult digital literacy learners, this essay illustrates the value of community outreach and service-learning for graduate students in writing studies. Presenting multiple perspectives through critical reflection, student authors describe how their…

  4. THE AMERICAN HIGH SCHOOL GRADUATION RATE: TRENDS AND LEVELS*

    Science.gov (United States)

    Heckman, James J.; LaFontaine, Paul A.

    2009-01-01

    This paper applies a unified methodology to multiple data sets to estimate both the levels and trends in U.S. high school graduation rates. We establish that (a) the true rate is substantially lower than widely used measures; (b) it peaked in the early 1970s; (c) majority/minority differentials are substantial and have not converged for 35 years; (d) lower post-1970 rates are not solely due to increasing immigrant and minority populations; (e) our findings explain part of the slowdown in college attendance and rising college wage premiums; and (f) widening graduation differentials by gender help explain increasing male-female college attendance gaps. PMID:20625528

  5. THE AMERICAN HIGH SCHOOL GRADUATION RATE: TRENDS AND LEVELS.

    Science.gov (United States)

    Heckman, James J; Lafontaine, Paul A

    2010-05-01

    This paper applies a unified methodology to multiple data sets to estimate both the levels and trends in U.S. high school graduation rates. We establish that (a) the true rate is substantially lower than widely used measures; (b) it peaked in the early 1970s; (c) majority/minority differentials are substantial and have not converged for 35 years; (d) lower post-1970 rates are not solely due to increasing immigrant and minority populations; (e) our findings explain part of the slowdown in college attendance and rising college wage premiums; and (f) widening graduation differentials by gender help explain increasing male-female college attendance gaps.

  6. Intelligent type sodium level gauge and its graduation calibration facility

    International Nuclear Information System (INIS)

    Chen Daolong; Wang Xuan; Li Xinying; Sun Huiqing; Zhu Jie

    1998-04-01

    The component construction and their performances of the intelligent type sodium level gauge newly-developed and its graduation calibration facility are presented. They can be operated in the temperature limit 100∼550 degree C. Its graduation characteristic calibration test is described. The temperature effect is analyzed. The graduation characteristic equation using the medium temperature as the parameter is given. The calibration errors are analyzed. The measurement system using this sodium level gauge is presented. The tests show that the intelligent type sodium level gauge possesses good linearity. The accurate sodium level measurement data can be obtained by means of its on-line compensation function of the temperature effect. Moreover, it possesses the self-inspection, the electric shutoff protection, the setting of full-scale, the thermocouple breaking alarm, the two upper limits and two lower limits alarms, the standard analog output signal and the digital output signal. Therefore, it is applicable particularly to the instrument, control and protection systems of LMFBR. The basic error of this intelligent type sodium level gauge is +-1.9% of measuring range

  7. A readout buffer prototype for ATLAS high-level triggers

    CERN Document Server

    Calvet, D; Huet, M; Le Dû, P; Mandjavidze, I D; Mur, M

    2001-01-01

    Readout buffers are critical components in the dataflow chain of the ATLAS trigger/data-acquisition system. At up to 75 kHz, after each Level-1 trigger accept signal, these devices receive and store digitized data from groups of front-end electronic channels. Several readout buffers are grouped to form a readout buffer complex that acts as a data server for the high-level trigger selection algorithms and for the final data-collection system. This paper describes a functional prototype of a readout buffer based on a custom-made PCI mezzanine card that is designed to accept input data at up to 160 MB /s, to store up to 8 MB of data, and to distribute data chunks at the desired request rate. We describe the hardware of the card that is based on an Intel 1960 processor and complex programmable logic devices. We present the integration of several of these cards in a readout buffer complex. We measure various performance figures and discuss to which extent these can fulfil ATLAS needs. (5 refs).

  8. Global challenges of graduate level Ayurvedic education: A survey

    Science.gov (United States)

    Patwardhan, Kishor; Gehlot, Sangeeta; Singh, Girish; Rathore, H.C.S.

    2010-01-01

    In the present day scenario, Ayurveda is globally being perceived in several contradictory ways. Poor quality of Ayurveda graduates produced as a result of poorly structured and poorly regulated education system is at least one of the important factors responsible for this scenario. The present study was carried out to evaluate the ‘Global challenges of graduate level Ayurvedic education’ and is based on the responses of Ayurvedic students and Ayurvedic teachers from various educational institutions of India to a methodically validated questionnaire. As the study indicates, the poor standard of Ayurvedic education in India is definitely a cause of concern. The curriculum of Bachelor of Ayurvedic Medicine and Surgery (BAMS) course of studies is required to be reviewed and restructured. The syllabi are required to be updated with certain relevant topics like laws governing the intellectual property rights, basic procedures of standardization of medicinal products, fundamental methods of evaluating the toxicity of the medicinal products, essentials of healthcare management and the basics of cultivation and marketing of medicinal plants. Furthermore, the study suggests that the Ayurvedic academicians are required to be trained in standard methods of research and documentation skills, and the educational institutions are required to be encouraged to contribute their share in building up the evidence base for Ayurveda in the form of quality education and research. PMID:20532099

  9. CMS Level-1 Upgrade Calorimeter Trigger Prototype Development

    CERN Document Server

    Klabbers, Pamela Renee

    2013-01-01

    As the LHC increases luminosity and energy, it will become increasingly difficult to select interesting physics events and remain within the readout bandwidth limitations. An upgrade to the CMS Calorimeter Trigger implementing more complex algorithms is proposed. It utilizes AMC cards with Xilinx FPGAs running in micro-TCA crate with card interconnections via crate backplanes and optical links operating at up to 10 Gbps. Prototype cards with Virtex-6 and Virtex-7 FPGAs have been built and software frameworks for operation and monitoring developed. The physics goals, hardware architectures, and software will be described in this talk. More details can be found in a separate poster at this conference.

  10. GEMS: A Graduate-level Community Nutrition Project.

    Science.gov (United States)

    Dow, Ruth McNabb

    1985-01-01

    Describes a project which: (1) compared cost and nutritive value of six student lunches (type A school lunch, a-la-carte school lunch, lunch at home, vended lunch, fast-food lunch, and brown bag lunch); (2) used findings to make recommendations for improving student lunches; and (3) developed graduate student assessment/research skills. (JN)

  11. Cultivating Advanced Technical Writing Skills through a Graduate-Level Course on Writing Research Proposals

    Science.gov (United States)

    McCarthy, Brian D.; Dempsey, Jillian L.

    2017-01-01

    A graduate-level course focused on original research proposals is introduced to address the uneven preparation in technical writing of new chemistry graduate students. This course focuses on writing original research proposals. The general course structure features extensive group discussions, small-group activities, and regular in-class…

  12. Applying Active Learning at the Graduate Level: Merger Issues at Newco.

    Science.gov (United States)

    Berger, Bruce K.

    2002-01-01

    Suggests that active learning can benefit students in public relations and integrated communication courses at the graduate level. Describes how three active learning approaches--research and field work, student accountabilities for learning, and student reflection and reflexive exercises--were used in a graduate class project to help a Fortune 50…

  13. Considerations for The Instruction Of Research Methodologies In Graduate-Level Distance Education Degree Programs

    Directory of Open Access Journals (Sweden)

    M. Cleveland-INNERS

    2004-04-01

    Full Text Available Considerations for The Instruction Of Research Methodologies In Graduate-Level Distance Education Degree Programs Tom JONES, Ph.D. Associate Professor Centre for Distance Education Athabasca University, CANADA M. Cleveland-INNERS, Ph.D. Assistant Professor Centre for Distance Education Athabasca University, CANADA ABSTRACT The growth of basic and applied research activity in distance education requires redirection on several fronts, including the instruction of research methods in the education of graduate students. The majority of graduate students in distance education are practitioners whose goals range from carrying out original research to acquiring the concepts and skills necessary to become a practitioner. We argue that the best foundation for achieving both of those goals in distance education is developed by means of an understanding and internalization of sound research design methodologies, primarily acquired by formal instruction, and that an emphasis on research in graduate programs in distance education will encourage theory development. This paper presents the rationale for a general curricular model that attempts to address the sets of research competencies for graduate students in graduate-level distance education programs while at the same time moving students toward an appreciation and understanding of the epistemological foundations for social science research.

  14. A second generation 50 Mbps VLSI level zero processing system prototype

    Science.gov (United States)

    Harris, Jonathan C.; Shi, Jeff; Speciale, Nick; Bennett, Toby

    1994-01-01

    Level Zero Processing (LZP) generally refers to telemetry data processing functions performed at ground facilities to remove all communication artifacts from instrument data. These functions typically include frame synchronization, error detection and correction, packet reassembly and sorting, playback reversal, merging, time-ordering, overlap deletion, and production of annotated data sets. The Data Systems Technologies Division (DSTD) at Goddard Space Flight Center (GSFC) has been developing high-performance Very Large Scale Integration Level Zero Processing Systems (VLSI LZPS) since 1989. The first VLSI LZPS prototype demonstrated 20 Megabits per second (Mbp's) capability in 1992. With a new generation of high-density Application-specific Integrated Circuits (ASIC) and a Mass Storage System (MSS) based on the High-performance Parallel Peripheral Interface (HiPPI), a second prototype has been built that achieves full 50 Mbp's performance. This paper describes the second generation LZPS prototype based upon VLSI technologies.

  15. A novel prototyping method for die-level monolithic integration of MEMS above-IC

    International Nuclear Information System (INIS)

    Cicek, Paul-Vahe; Zhang, Qing; Saha, Tanmoy; Mahdavi, Sareh; Allidina, Karim; Gamal, Mourad El; Nabki, Frederic

    2013-01-01

    This work presents a convenient and versatile prototyping method for integrating surface-micromachined microelectromechanical systems (MEMS) directly above IC electronics, at the die level. Such localized implementation helps reduce development costs associated with the acquisition of full-sized semiconductor wafers. To demonstrate the validity of this method, variants of an IC-compatible surface-micromachining MEMS process are used to build different MEMS devices above a commercial transimpedance amplifier chip. Subsequent functional assessments for both the electronics and the MEMS indicate that the integration is successful, validating the prototyping methodology presented in this work, as well as the suitability of the selected MEMS technology for above-IC integration. (paper)

  16. Graduate Attribute Attainment in a Multi-Level Undergraduate Geography Course

    Science.gov (United States)

    Mager, Sarah; Spronken-Smith, Rachel

    2014-01-01

    We investigated students' perceptions of graduate attributes in a multi-level (second and third year) geography course. A case study with mixed methodology was employed, with data collected through focus groups and a survey. We found that undergraduate geography students can identify the skills, knowledge and attributes that are developed through…

  17. National- and State-Level High School Graduation Rates for English Learners. Fast Facts

    Science.gov (United States)

    Office of English Language Acquisition, US Department of Education, 2016

    2016-01-01

    The Office of English Language Acquisition (OELA) has synthesized key data on English learners (ELs) into two-page PDF sheets, by topic, with graphics, plus key contacts. The topic for this report on English Learners (ELs) are national- and state-level high school graduation rates for English Learners. The following data are presented: (1)…

  18. Academic Writing for Graduate-Level English as a Second Language Students: Experiences in Education

    Science.gov (United States)

    Sidman-Taveau, Rebekah; Karathanos-Aguilar, Katya

    2015-01-01

    Graduate-level ESL students in Education are future multicultural educators and promising role models for our diverse K-12 students. However, many of these students struggle with academic English and, in particular, writing. Yet little research or program development addresses the specific writing-support needs of this group. This article shares…

  19. Students' Perceptions of a Twitter-Based Assignment in a Graduate-Level Instructional Technology Course

    Science.gov (United States)

    Nygard, Shanda; Day, Micah; Fricke, Gretchen; Knowlton, Dave S.

    2014-01-01

    This article examines Twitter as an innovation to enhance student learning within an online graduate-level course. Specifically, this article includes 3 narratives from students who were charged with using Twitter as a medium for sharing photographs and accompanying analysis. Within each narrative, students' experiences and opinions are…

  20. Academic Procrastination and the Performance of Graduate-Level Cooperative Groups in Research Methods Courses

    Science.gov (United States)

    Jiao, Qun G.; DaRos-Voseles, Denise A.; Collins, Kathleen M. T.; Onwuegbuzie, Anthony J.

    2011-01-01

    This study examined the extent to which academic procrastination predicted the performance of cooperative groups in graduate-level research methods courses. A total of 28 groups was examined (n = 83 students), ranging in size from 2 to 5 (M = 2.96, SD = 1.10). Multiple regression analyses revealed that neither within-group mean nor within-group…

  1. Graduate Level Training in Nutrition: An Integrated Model for Capacity Building- A National Report

    Science.gov (United States)

    SHEIKHOLESLAM, Robabeh; GHASSEMI, Hossein; GALAL, Osman; DJAZAYERY, Abolghassem; OMIDVAR, Nasrin; NOURMOHAMMADI, Issa; TUAZON, Ma. Antonia G.

    2015-01-01

    Iran has been active in human nutrition training for the past five decades, but the existing curricular programs do not equip the graduates with the knowledge and skills required for solving food security and nutritional problems of the country. Given this, the Nutrition Department (ND) of Iran’s Ministry of Health and Medical Education (MOHME) initiated a curricular reform to develop responsive graduate programs in key areas of nutrition that fill the existing gaps in nutrition training with the goal of improving nutrition policy-making and program development, implementation and evaluation. ND called for a request for proposals for a project entitled “Graduate Level Training in Nutrition”. Specifically, with technical assistance from leading academic institutions in Asia, North America and UK, seven new graduate programs were housed in three separate institutions, but coordinated so that together they form a broad multidisciplinary resource for graduate education and research. These seven-degree programs are MSc and PhD in Molecular/Cellular Nutrition, MSc and PhD in Nutritional Epidemiology, MSc and PhD in Food Policy and Nutrition Intervention, and MSc in Community Nutrition. The programs were prepared in collaboration and active participation of selected faculty members of the three Iranian universities, International Union of Nutritional Sciences and the University of Philippines at Los Baños. The development of these programs was made possible through a loan from the World Bank, under the Second Primary Health and Nutrition Project in the MOHME. PMID:25905083

  2. Graduate level training in nutrition: an integrated model for capacity building- a national report.

    Science.gov (United States)

    Sheikholeslam, Robabeh; Ghassemi, Hossein; Galal, Osman; Djazayery, Abolghassem; Omidvar, Nasrin; Nourmohammadi, Issa; Tuazon, Ma Antonia G

    2015-03-01

    Iran has been active in human nutrition training for the past five decades, but the existing curricular programs do not equip the graduates with the knowledge and skills required for solving food security and nutritional problems of the country. Given this, the Nutrition Department (ND) of Iran's Ministry of Health and Medical Education (MOHME) initiated a curricular reform to develop responsive graduate programs in key areas of nutrition that fill the existing gaps in nutrition training with the goal of improving nutrition policy-making and program development, implementation and evaluation. ND called for a request for proposals for a project entitled "Graduate Level Training in Nutrition". Specifically, with technical assistance from leading academic institutions in Asia, North America and UK, seven new graduate programs were housed in three separate institutions, but coordinated so that together they form a broad multidisciplinary resource for graduate education and research. These seven-degree programs are MSc and PhD in Molecular/Cellular Nutrition, MSc and PhD in Nutritional Epidemiology, MSc and PhD in Food Policy and Nutrition Intervention, and MSc in Community Nutrition. The programs were prepared in collaboration and active participation of selected faculty members of the three Iranian universities, International Union of Nutritional Sciences and the University of Philippines at Los Baños. The development of these programs was made possible through a loan from the World Bank, under the Second Primary Health and Nutrition Project in the MOHME.

  3. A critical assessment of the perceptions of graduates regarding their generic skills level: an exploratory study

    Directory of Open Access Journals (Sweden)

    Elroy Eugene Smith

    2011-09-01

    Full Text Available This article outlines the perceptions of potential Business Management graduates regarding their generic skills level.  To achieve the aim of this article, a literature study and empirical research were undertaken.  A self-administered questionnaire was distributed to 205 potential Business Management graduates at a tertiary institution. To investigate the relationship between the independent and dependent variables, thirteen null-hypotheses were tested.  The results revealed some significant relationships between these variables.  Seven predetermined generic skills factors, namely basic, communication, management, environmental awareness, intellectual, self and career management as well as interpersonal skills, were identified and empirically tested in this article.  Skills development should take place within an overall framework providing for the coordination and progression of skills development from first to final year of study.  Future curricula development should specifically focus on developing those skills lacking most by potential graduates as identified in this article.

  4. Comfort level of post graduate residents working in different clinical domains in managing common ophthalmic conditions

    International Nuclear Information System (INIS)

    Jaffar, S.; Tayyab, A.; Shah, S.S.; Naseem, S.; Ghazanfar, H.

    2016-01-01

    Background: Ophthalmological conditions are frequently encountered in almost all clinical specialties. Assessing the adequacy of ophthalmology teaching in undergraduate medical education is important in order to diagnose and manage different ophthalmological conditions. The objective of this study was to determine the comfort level of post graduate residents working in different clinical domains in managing common ophthalmic conditions. Methods: A cross sectional survey involving 277 post graduate residents was carried out over a period of six months in both private and public tertiary care hospital. A questionnaire containing two sections and 17 variables in total were distributed among Medical Residents of different specialties except ophthalmology residents. Participants of the study were selected through consecutive non probability sampling. Results: Mean hours of classroom based ophthalmology instruction during during undergraduate program was 59.38 hours (55.9) and mean hours of clinical based ophthalmology instruction during undergraduate program was 62.73 hours (60.8) 54 percentage were either not comfortable or somewhat comfortable in managing common ophthalmic condition. Conclusion: Teaching hours in under graduate program meet or exceed requisite criteria. However graduating doctors generally feel that the time spent does not provide them with the comfort and skill level required to care for patients with ocular presentations. (author)

  5. Attitude and skill levels of graduate health professionals in performing cardiopulmonary resuscitation

    Directory of Open Access Journals (Sweden)

    Gebreegziabher Gebremedhn E

    2017-01-01

    Full Text Available Endale Gebreegziabher Gebremedhn,1 Gebremedhn Berhe Gebregergs,2 Bernard Bradley Anderson,3,† Vidhya Nagaratnam1 1Department of Anaesthesia, School of Medicine, College of Medicine and Health Sciences, University of Gondar, Gondar, 2Department of Public Health, Bahir Dar College of Medicine and Health Sciences, Bahir Dar University, Bahir Dar, 3Department of Surgery, School of Medicine, College of Medicine and Health Sciences, University of Gondar, Gondar, Ethiopia †Dr Bernard Bradley Anderson passed away on January 2, 2014 Background: Cardiopulmonary resuscitation (CPR is an emergency procedure used to treat victims following cardiopulmonary arrest. Graduate health professionals at the University of Gondar Teaching Hospital manage many trauma and critically ill patients. The chance of survival after cardiopulmonary arrest may be increased with sufficient attitude and skill levels. The study aimed to assess the attitude and skill levels of graduate health professionals in performing CPR.Methods: A hospital-based cross-sectional study was conducted from May 1 to 30, 2013, at the University of Gondar Teaching Hospital. The mean attitude and skill scores were compared for sex, original residence, and department of the participants using Student’s t-test and analysis of variance (Scheffe’s test. P-values <0.05 were considered to be statistically significant.Results: Of the 506 graduates, 461 were included in this study with a response rate of 91.1%. The mean attitude scores of nurse, interns, health officer, midwifery, anesthesia, and psychiatric nursing graduates were 1.15 (standard deviation [SD] =1.67, 8.21 (SD =1.24, 7.2 (SD =1.49, 6.69 (SD =1.83, 8.19 (SD =1.77, and 7.29 (SD =2.01, respectively, and the mean skill scores were 2.34 (SD =1.95, 3.77 (SD =1.58, 1.18 (SD =1.52, 2.16 (SD =1.93, 3.88 (SD =1.36, and 1.21 (SD =1.77, respectively.Conclusion and recommendations: Attitude and skill level of graduate health professionals with regard

  6. The development of a prototype level-three interoperable catalog system

    Science.gov (United States)

    Hood, Carroll A.; Howie, Randy; Verhanovitz, Rich

    1993-08-01

    The development of a level-three interoperable catalog system is defined by a new paradigm for metadata access. The old paradigm is characterized by a hierarchy of metadata layers, the transfer of control to target systems, and the requirement for the user to be familiar with the syntax and data dictionaries of several catalog system elements. Attributes of the new paradigm are exactly orthogonal: the directory and inventories are peer entities, there is a single user interface, and the system manages the complexity of interacting transparently with remote elements. We have designed and implemented a prototype level-three interoperable catalog system based on the new paradigm. Through a single intelligent interface, users can interoperably access a master directory, inventories for selected satellite datasets, and an in situ meteorological dataset inventory. This paper describes the development of the prototype system and three of the formidable challenges that were addressed in the process. The first involved the interoperable integration of satellite and in situ inventories, which to our knowledge, has never been operationally demonstrated. The second was the development of a search strategy for orbital and suborbital granules which preserves the capability to identify temporally or spatially coincident subsets between them. The third involved establishing a method of incorporating inventory-specific search criteria into user queries. We are working closely with selected science data users to obtain feedback on the system's design and performance. The lessons learned from this prototype will help direct future development efforts. Distributed data systems of the 1990s such as EOSDIS and the Global Change Data and Information System (GCDIS) will be able to build on this prototype.

  7. Education in radiopharmacy at pre and post-graduate level : in it valuable for clinical practice

    International Nuclear Information System (INIS)

    Savio, E.O.; Rey, A.M.; Teran, M.A.; Fornaro, L.R.; Leon, A.S.

    2004-01-01

    Radiopharmacy deals with the design preparation, quality control and dispensation of medicinal radioactive products used in Nuclear Medicine. In the context of the Hospital Radiopharmacy Unit the Radio pharmacist responsibilities also include radiation protection of personnel and patients, monitoring and advice in case of adverse effects after administration, involvement in clinical protocols and training of other members of the staff. In order to develop all these functions, knowledge in a variety of fields including radiation physics and biology, chemistry of radiopharmaceuticals, GMP, radiopharmacology, etc. is required. However, Radio pharmacists have traditionally got their expertise by a combination of informal training and self-education. Possibilities of formal education in Radiopharmacy are still very limited. Consequently, the Faculty of Chemistry and Pharmacy of Uruguay has started a pre graduate optional course of Radiopharmacy for advanced Pharmacy students and a post-graduate course for Hospital Pharmacy Specialization. Both subjects include theoretical and practical classes on handling and detection of radioactive substance, radioprotection, preparation of radiopharmaceuticals and clinical applications, together with seminars for discussion of relevant matters. At pre graduate level, the subject provides a basic training for a future professionals working in this field. For Hospital Pharmacists the pos graduate course supports the interpretation of clinical histories of patients that have undergone Nuclear Medicine procedures, and provides the necessary background to give suitable advice to patients, their family and health staff about radiation protection

  8. Developing Curriculum of Nuclear Civil Engineering Degree Programme at Graduate Level

    International Nuclear Information System (INIS)

    Iqbal, J.

    2016-01-01

    Full text: The paper suggests the introduction of a new degree, namely nuclear civil engineering at graduate level for better utilization of civil engineers in nuclear power plant (NPP) design and construction. At present, both nuclear engineering and civil engineering degrees are offered at undergraduate and graduate levels in numerous renowned universities of the world. However, when a civil engineer, even after completion of nuclear engineering at postgraduate level, undertakes an assignment related to NPP design, he comes across various problems which are not covered in the present curricula. For instance, NPPs’ siting issues, design of pre-stressed concrete containment against loads of loss of coolant accident (LOCA), various impulsive and impactive loads (e.g., detonations, aircraft crash analysis, etc.) and shielding calculations are some of the core issues during nuclear power plant design. The paper highlights the importance of introduction of nuclear civil engineering degree at the graduate level. Besides, the contents of the proposed course work have also been discussed. Keeping in view the fact that, currently, no such degree is offered in any university of the world, the paper explores useful avenues to human resource development for introducing and expanding nuclear power programmes. (author

  9. Flipping for success: evaluating the effectiveness of a novel teaching approach in a graduate level setting

    OpenAIRE

    Moraros, John; Islam, Adiba; Yu, Stan; Banow, Ryan; Schindelka, Barbara

    2015-01-01

    Background Flipped Classroom is a model that?s quickly gaining recognition as a novel teaching approach among health science curricula. The purpose of this study was four-fold and aimed to compare Flipped Classroom effectiveness ratings with: 1) student socio-demographic characteristics, 2) student final grades, 3) student overall course satisfaction, and 4) course pre-Flipped Classroom effectiveness ratings. Methods The participants in the study consisted of 67 Masters-level graduate student...

  10. A study of statistics anxiety levels of graduate dental hygiene students.

    Science.gov (United States)

    Welch, Paul S; Jacks, Mary E; Smiley, Lynn A; Walden, Carolyn E; Clark, William D; Nguyen, Carol A

    2015-02-01

    In light of increased emphasis on evidence-based practice in the profession of dental hygiene, it is important that today's dental hygienist comprehend statistical measures to fully understand research articles, and thereby apply scientific evidence to practice. Therefore, the purpose of this study was to investigate statistics anxiety among graduate dental hygiene students in the U.S. A web-based self-report, anonymous survey was emailed to directors of 17 MSDH programs in the U.S. with a request to distribute to graduate students. The survey collected data on statistics anxiety, sociodemographic characteristics and evidence-based practice. Statistic anxiety was assessed using the Statistical Anxiety Rating Scale. Study significance level was α=0.05. Only 8 of the 17 invited programs participated in the study. Statistical Anxiety Rating Scale data revealed graduate dental hygiene students experience low to moderate levels of statistics anxiety. Specifically, the level of anxiety on the Interpretation Anxiety factor indicated this population could struggle with making sense of scientific research. A decisive majority (92%) of students indicated statistics is essential for evidence-based practice and should be a required course for all dental hygienists. This study served to identify statistics anxiety in a previously unexplored population. The findings should be useful in both theory building and in practical applications. Furthermore, the results can be used to direct future research. Copyright © 2015 The American Dental Hygienists’ Association.

  11. Creating a Culture of Communication: A Graduate-Level STEM Communication Fellows Program at a Science and Engineering University

    Science.gov (United States)

    Simpson, Steve; Clemens, Rebecca; Killingsworth, Drea Rae; Ford, Julie Dyke

    2015-01-01

    A flurry of recent research in writing studies has addressed the need for more systematic approaches to graduate-level writing support, though more research is needed into more organic models that account for graduate students' specific needs and that build infrastructure for writing support within university departments. This article reports on a…

  12. Examining the Relationship between the Levels of Digital Citizenship and Social Presence for the Graduate Students Having Online Education

    Science.gov (United States)

    Elcicek, Mithat; Erdemci, Husamettin; Karal, Hasan

    2018-01-01

    The aim of this study is to determine the levels of digital citizenship and social presence of the graduate students having distance education and to reveal the relationship between these two variables. The research was carried out with 50 women (35%) and 93 men (65%) graduate students enrolled in distance education master programs of Karadeniz…

  13. Exploring the Unique Features of a First Nations Graduate-Level Social Work Program

    Directory of Open Access Journals (Sweden)

    Ralph C. Bodor

    2015-03-01

    Full Text Available Recently, a one-time cohort of graduate-level social work students completed a unique MSW program. The program was delivered in partnership between the Faculty of Social Work, University of Calgary and Blue Quills First Nations College and, of the twenty four graduates; twenty-one were of First Nations or Me´tis ancestry. The program honored traditional knowledge and ways of learning combined with a critical analysis of Western perspectives of social work knowledge. Strong fiscal resources enabled the program to establish a formal support network for the students and to support the development of Indigenous curriculum and programming that encouraged success for the students. The program was fundamentally different than urban on-campus programs while still maintaining graduate level accreditation requirements. This analysis of the program required the use of Indigenous Research Methodology to collect and create an understanding of the program. Instructors commented on the centered, empowered, balanced, and congruent students. The formal and informal, concrete and invisible supports to the students ensured the success of this program and this cohort of students. As one student commented, the program started in ceremony, ended in ceremony, and could not fail within the context ceremony.

  14. Vocal Health Education and Medical Resources for Graduate-Level Vocal Performance Students.

    Science.gov (United States)

    Latham, Katherine; Messing, Barbara; Bidlack, Melissa; Merritt, Samantha; Zhou, Xian; Akst, Lee M

    2017-03-01

    Most agree that education about vocal health and physiology can help singers avoid the development of vocal disorders. However, little is known about how this kind of education is provided to singers as part of their formal training. This study describes the amount of instruction in these topics provided through graduate-level curricula, who provides this instruction, and the kinds of affiliations such graduate singing programs have with medical professionals. This is an online survey of music schools with graduate singing programs. Survey questions addressed demographics of the programs, general attitudes about vocal health instruction for singers, the amount of vocal health instruction provided and by whom it was taught, perceived barriers to including more vocal health instruction, and any affiliations the voice program might have with medical personnel. Eighty-one survey responses were received. Instruction on vocal health was provided in 95% of the schools. In 55% of the schools, none of this instruction was given by a medical professional. Limited time in the curriculum, lack of financial support, and lack of availability of medical professional were the most frequently reported barriers to providing more instruction. When programs offered more hours of instruction, they were more likely to have some of that instruction given by a medical professional (P = 0.008) and to assess the amount of instruction provided positively (P = 0.001). There are several perceived barriers to incorporating vocal health education into graduate singing programs. Opportunity exists for more collaboration between vocal pedagogues and medical professionals in the education of singers about vocal health. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

  15. Prototype architecture for a VLSI level zero processing system. [Space Station Freedom

    Science.gov (United States)

    Shi, Jianfei; Grebowsky, Gerald J.; Horner, Ward P.; Chesney, James R.

    1989-01-01

    The prototype architecture and implementation of a high-speed level zero processing (LZP) system are discussed. Due to the new processing algorithm and VLSI technology, the prototype LZP system features compact size, low cost, high processing throughput, and easy maintainability and increased reliability. Though extensive control functions have been done by hardware, the programmability of processing tasks makes it possible to adapt the system to different data formats and processing requirements. It is noted that the LZP system can handle up to 8 virtual channels and 24 sources with combined data volume of 15 Gbytes per orbit. For greater demands, multiple LZP systems can be configured in parallel, each called a processing channel and assigned a subset of virtual channels. The telemetry data stream will be steered into different processing channels in accordance with their virtual channel IDs. This super system can cope with a virtually unlimited number of virtual channels and sources. In the near future, it is expected that new disk farms with data rate exceeding 150 Mbps will be available from commercial vendors due to the advance in disk drive technology.

  16. Fostering Graduate Level Student Success: What Research Says and How to Apply it in the Classroom

    Directory of Open Access Journals (Sweden)

    Victoria Landu-Adams

    2016-08-01

    Full Text Available The best instructors know how to engage their students from the first day of class and help them reach high levels of accomplishment in grasping difficult content, even in graduate level coursework. To create a positive learning environment, instructors must be proactive and anticipate challenges students are likely to face during the class. Whether we like to admit it or not, there are difficult courses for students to grasp within every program of study. Students' ability to learn and retain difficult information is based on physiological, emotional, sociological, and psychological factors. Therefore, instructors need to consider incorporating appropriate classroom practices for a diversity of learners. Are you searching for innovative, quick and easy ideas to "bait" your students on the first day and "hook" them to be comfortable with anxiety-laden courses for the remainder of the course instruction? This paper will present hands-on activities that can easily be utilized in even the most difficult graduate-level subjects. These activities build positive learning environments to help ease anxiety from the first day. It will also include interactive activities that can be adapted to any subject matter at any instructional level in the higher educational setting.

  17. Application of PSA level 1 for the Fugen prototype ATR plant

    International Nuclear Information System (INIS)

    Ikeda, H.; Iguchi, Y.; Sotsu, M.; Seki, O.; Satou, S.

    1997-01-01

    This paper presents application of PSA Level-1 for Prototype Advanced Thermal Reactor Plant ''Fugen'' in consideration of the design characteristics of such reactor and verify the safety aspect of Fugen using thus established procedure, ATR resembles the boiling water reactor (BWR) in a number of points, but there are also some differences between the ATR and the BWR. Therefore. PSA procedure have been established by taking such difference into consideration and by referring to experience of PSA in USA and Japan. Moreover, the core damage frequency was calculated on Fugen by using thus established procedure. As a result, it was verified that results including the maximum value of the uncertainty estimation were found to be quite satisfactory against the target value of reactor damage frequency defined by the International Atomic Energy Agency (IAEA). (author)

  18. Levels of empathy and professional ethics in candidates to Medical Graduate School

    Directory of Open Access Journals (Sweden)

    José Luis Jiménez-López

    2017-07-01

    Full Text Available The current perception of a dehumanized medical attention and its low quality has questioned the empathic capacity and ethics of the health professionals. The research in this field reports variations in this attributes along the doctors’ education. Objective: to explore the global levels of empathy and professional ethics, as well as the levels of each component of both attributes in a sample of applicants to a medical graduate program. Methodology: 65 residents that applied for graduation studies in a very specialized medical unit were included. As part of the application process, they answered the Cognitive and Affective Empathy Test and the Professional Ethical Attitudes Scale. Results: The average scores of the sample got Average in empathy and Optimal in professional ethics. The comparison by gender, specialty and competences showed less affective and better ethical competence in women, more cognitive empathy in surgical specialties, and in general an absence of correlation between the two variables and specifically by competence. Conclusions: The importance of measuring the specific competences of each attribute is highlighted given that the variation in specific competences impact in different aspects the doctor’s education, as the specialty choice, the student selection, the development of academic programs and the adequate learning about the construction of an effective relation doctor-patient. © Revista Colombiana de Ciencias Sociales

  19. Examining the Relationship between the Levels of Digital Citizenship and Social Presence for the Graduate Students Having Online Education

    OpenAIRE

    Mithat ELCICEK; Hüsamettin ERDEMCİ; Hasan KARAL

    2018-01-01

    The aim of this study is to determine the levels of digital citizenship and social presence of the graduate students having distance education and to reveal the relationship between these two variables. The research was carried out with 50 women (35%) and 93 men (65%) graduate students enrolled in distance education master programs of Karadeniz Technical University. Individual Information Form, Social Presence Scale and Digital Citizenship Scale were used to collect data. Descriptive statisti...

  20. Prototype of a file-based high-level trigger in CMS

    International Nuclear Information System (INIS)

    Bauer, G; Darlea, G-L; Gomez-Ceballos, G; Bawej, T; Chaze, O; Coarasa, J A; Deldicque, C; Dobson, M; Dupont, A; Gigi, D; Glege, F; Gomez-Reino, R; Hartl, C; Hegeman, J; Masetti, L; Behrens, U; Branson, J; Cittolin, S; Holzner, A; Erhan, S

    2014-01-01

    The DAQ system of the CMS experiment at the LHC is upgraded during the accelerator shutdown in 2013/14. To reduce the interdependency of the DAQ system and the high-level trigger (HLT), we investigate the feasibility of using a file-system-based HLT. Events of ∼1 MB size are built at the level-1 trigger rate of 100 kHz. The events are assembled by ∼50 builder units (BUs). Each BU writes the raw events at ∼2GB/s to a local file system shared with Q(10) filter-unit machines (FUs) running the HLT code. The FUs read the raw data from the file system, select Q(1%) of the events, and write the selected events together with monitoring meta-data back to a disk. This data is then aggregated over several steps and made available for offline reconstruction and online monitoring. We present the challenges, technical choices, and performance figures from the prototyping phase. In addition, the steps to the final system implementation will be discussed.

  1. A read-out buffer prototype for ATLAS high level triggers

    CERN Document Server

    Calvet, D; Huet, M; Le Dû, P; Mandjavidze, I D; Mur, M

    2000-01-01

    Read-Out Buffers are critical components in the dataflow chain of the ATLAS Trigger/DAQ system. At up to 75 kHz, after each Level-1 trigger accept signal, these devices receive and store digitized data from groups of front-end electronic channels. Several Read-Out Buffers are grouped to form a Read-Out Buffer Complex that acts as a data server for the High Level Triggers selection algorithms and for the final data collection system. This paper describes a functional prototype of a Read-Out Buffer based on a custom made PCI mezzanine card that is designed to accept input data at up to 160 MB/s, to store up to 8 MB of data and to distribute data chunks at the desired request rate. We describe the hardware of the card that is based on an Intel I960 processor and CPLDs. We present the integration of several of these cards in a Read-Out Buffer Complex. We measure various performance figures and we discuss to which extent these can fulfill ATLAS needs. 5 Refs.

  2. ATLAS Level-1 Calorimeter Trigger Subsystem Tests of a Prototype Cluster Processor Module

    CERN Document Server

    Garvey, J; Apostologlou, P; Ay, C; Barnett, B M; Bauss, B; Brawn, I P; Bohm, C; Dahlhoff, A; Davis, A O; Edwards, J; Eisenhandler, E F; Gee, C N P; Gillman, A R; Hanke, P; Hellman, S; Hidévgi, A; Hillier, S J; Jakobs, K; Kluge, E E; Landon, M; Mahboubi, K; Mahout, G; Meier, K; Meshkov, P; Moye, T H; Mills, D; Moyse, E; Nix, O; Penno, K; Perera, V J O; Qian, W; Schmitt, K; Schäfer, U; Silverstein, S; Staley, R J; Thomas, J; Trefzger, T M; Watkins, P M; Watson, A; 9th Workshop On Electronics For LHC Experiments - LECC 2003

    2003-01-01

    The Level-1 Calorimeter Trigger consists of a Preprocessor (PP), a Cluster Processor (CP), and a Jet/Energy-sum Processor (JEP). The CP and JEP receive digitised trigger-tower data from the Preprocessor and produce trigger multiplicity and Region-of-Interest (RoI) information. The trigger will also provide intermediate results to the data acquisition (DAQ) system for monitoring and diagnostic purposes by using Readout Driver (ROD) Modules. The CP Modules (CPM) are designed to find isolated electron/photon and hadron/tau clusters in overlapping windows of trigger towers. Each pipelined CPM processes 8-bit data from a total of 128 trigger towers at each LHC crossing. Four full-specification prototypes of CPMs have been built and results of complete tests on individual boards will be presented. These modules were then integrated with other modules to build an ATLAS Level-1 Calorimeter Trigger subsystem test bench. Realtime data were exchanged between modules, and time-slice readout data were tagged and transferr...

  3. Flipping for success: evaluating the effectiveness of a novel teaching approach in a graduate level setting.

    Science.gov (United States)

    Moraros, John; Islam, Adiba; Yu, Stan; Banow, Ryan; Schindelka, Barbara

    2015-02-28

    Flipped Classroom is a model that's quickly gaining recognition as a novel teaching approach among health science curricula. The purpose of this study was four-fold and aimed to compare Flipped Classroom effectiveness ratings with: 1) student socio-demographic characteristics, 2) student final grades, 3) student overall course satisfaction, and 4) course pre-Flipped Classroom effectiveness ratings. The participants in the study consisted of 67 Masters-level graduate students in an introductory epidemiology class. Data was collected from students who completed surveys during three time points (beginning, middle and end) in each term. The Flipped Classroom was employed for the academic year 2012-2013 (two terms) using both pre-class activities and in-class activities. Among the 67 Masters-level graduate students, 80% found the Flipped Classroom model to be either somewhat effective or very effective (M = 4.1/5.0). International students rated the Flipped Classroom to be significantly more effective when compared to North American students (X(2) = 11.35, p Students' perceived effectiveness of the Flipped Classroom had no significant association to their academic performance in the course as measured by their final grades (r s = 0.70). However, students who found the Flipped Classroom to be effective were also more likely to be satisfied with their course experience. Additionally, it was found that the SEEQ variable scores for students enrolled in the Flipped Classroom were significantly higher than the ones for students enrolled prior to the implementation of the Flipped Classroom (p = 0.003). Overall, the format of the Flipped Classroom provided more opportunities for students to engage in critical thinking, independently facilitate their own learning, and more effectively interact with and learn from their peers. Additionally, the instructor was given more flexibility to cover a wider range and depth of material, provide in-class applied learning

  4. Methods of training the graduate level and professional geologist in remote sensing technology

    Science.gov (United States)

    Kolm, K. E.

    1981-01-01

    Requirements for a basic course in remote sensing to accommodate the needs of the graduate level and professional geologist are described. The course should stress the general topics of basic remote sensing theory, the theory and data types relating to different remote sensing systems, an introduction to the basic concepts of computer image processing and analysis, the characteristics of different data types, the development of methods for geological interpretations, the integration of all scales and data types of remote sensing in a given study, the integration of other data bases (geophysical and geochemical) into a remote sensing study, and geological remote sensing applications. The laboratories should stress hands on experience to reinforce the concepts and procedures presented in the lecture. The geologist should then be encouraged to pursue a second course in computer image processing and analysis of remotely sensed data.

  5. Prototype of thermal degradation for radioactive wastes of low and intermediate level

    International Nuclear Information System (INIS)

    Diaz A, L.V.; Pacheco S, J.O.; Pacheco P, M.; Monroy G, F.; Emeterio H, M.

    2005-01-01

    At the present time, the scientific, academic, industrial and technological activities, generate great quantity of radioactive wastes of low and intermediate level (DRNBI). For to assure an appropriate final disposal of these, it is intended their treatment and vitrification by means of thermal plasma. This alternative offers multiple advantages in an only process: elevated energy density (105W/cm 3 ), high enthalpy (1400 kJ/mol), elevated chemical reactivity, quick quenching (106K/s) and operation temperatures of 4000 to 15000K; this allows the treatment of a great diversity of waste. Those reactors are compact and they work to atmospheric pressure and reduced thermal inertia. This technology allows to degrade DRNBI and to contain them in a vitreous matrix by means of a system made up of a reactor, canyon of plasma, of monitoring, of washing of gases and of control. Besides the design and general characteristics of the Prototype of Thermal Degradation of DRNBI, they are reported in this work the advances achieved in the selection of the ceramic material for the vitrification. Their characterization was carried out by means of SEM and XRD. With the preliminary results it can discern that the material but appropriate to be used as vitreous matrix is a ceramic clay. With the development of the proposed technology and the material for the vitreous matrix, it will be to treat DRNBI. (Author)

  6. Examining the Relationship between the Levels of Digital Citizenship and Social Presence for the Graduate Students Having Online Education

    Directory of Open Access Journals (Sweden)

    Mithat ELCICEK

    2018-01-01

    Full Text Available The aim of this study is to determine the levels of digital citizenship and social presence of the graduate students having distance education and to reveal the relationship between these two variables. The research was carried out with 50 women (35% and 93 men (65% graduate students enrolled in distance education master programs of Karadeniz Technical University. Individual Information Form, Social Presence Scale and Digital Citizenship Scale were used to collect data. Descriptive statistics were used in the study to determine the levels of digital citizenship and social presence of the students. Correlation analysis for the relationship between variables and linear regression for the predictive power were used. The results indicated that graduate students enrolled in distance education master programs had high levels in digital citizenship and social presence. Furthermore, the mentioned levels were comprehended to have significant and positive relationship among themselves. While the levels of digital citizenship and social presence didn’t differentiate significantly in terms of gender, social presence levels differentiated in favour of Educational Sciences Insitute. Also the level of social presence for the graduate students was concluded to be significantly predictive for digital citizenship level.

  7. The Readiness Level of Using e-Learning Among Teacher Graduate Programme (TGP

    Directory of Open Access Journals (Sweden)

    Abd Samad Noorazman

    2018-01-01

    Full Text Available Using e-Learning among Teacher Graduate Programme (TGP to students who are newly exposed in Teaching and Learning (T&L proses. The major problem among student’s TGP is the readiness level in knowledge, attitude and skills using e-Learning during Teaching and Learning (T&L . This study is to identify any significant differences of the knowledge level between male and female TGP students. The design of this study is to survey research using instruments of questionnaire which are distributed to respondents among TGP students at the Faculty of Technical and Vocational, UTHM. The sample is given to 248 respondents and analysis using version SPSS 21.0. Data presented using descriptive method such as, Mean, Standard Deviation(SD, inferens statistic using Mann-Whitney U to identify the knowledge difference between male and female TGP students. The result showed that the level of application of e-Learning among TGP students in terms of knowledge, attitude and skill at moderate level. The study also showed that there are no significant knowledge difference among male and female TGP students because the result of p= 0.044 value is less <0.05 can be stated that Ha failed rejected. The results of this study is important to provide awareness especially to the TGP students, lecturers and also UTHM in providing new T&L using e-Learning.

  8. Multi-level virtual prototyping of electromechanical actuation system for more electric aircraft

    Directory of Open Access Journals (Sweden)

    Jian FU

    2018-05-01

    Full Text Available Electromechanical actuators (EMAs are becoming increasingly attractive in the field of more electric aircraft because of their outstanding benefits, which include reduced fuel burn and maintenance cost, enhanced system flexibility, and improved management of fault detection and isolation. However, electromechanical actuation raises specific issues when being used for safety-critical aerospace applications like flight controls: huge reflected inertia to load, jamming-type failure, and increase of backlash with service due to wear and local dissipation of heat losses for thermal balance. This study proposes an incremental approach for virtual prototyping of EMAs. It is driven by a model-based system engineering process in order to enable simulation-aided design. Best practices supported by Bond graph formalism are suggested to develop a model’s structure efficiently and to make the model ready for use (or extension by addressing the above mentioned issues. Physical effects are progressively introduced, and the realism of lumped-parameter models is increased step-by-step. In particular, multi-level component models are architected to ensure continuity between engineering activities. The models are implemented in the AMESim simulation environment, and simulation responses are given to illustrate how they can be used for preliminary sizing, control design, thermal balance verification, and faults to failure analysis. The proposed best practices intend to provide engineers with fast, reusable, and efficient means to assess performance virtually and enhance maturity, performance, and robustness. Keywords: Bond graph, Electromechanical actuator, Flight control, Model-based system engineering, More electric aircraft, Power-by-wire

  9. Employers' Perception of Graduates with Entry-Level Technical Skills from Construction Industry Programs in Ghana and Nigeria

    Science.gov (United States)

    Acheampong, Philip

    2013-01-01

    The purpose of this comparative study was to identify the technical skills and abilities needed by prospective employees of construction industries in Ghana and Nigeria. Potential employees were defined here as recent graduates of construction industry programs with entry-level technical skills. The continuous growth in and expansion of these two…

  10. A Balancing Act in the Third Space: Graduate-Level Earth Science in an Urban Teacher-Residency Program

    Science.gov (United States)

    Zirakparvar, N. Alex

    2015-01-01

    This article describes a museum-based urban teacher-residency (UTR) program's approach to building subject-specific content knowledge and research experience in Earth Science teacher candidates. In the museum-based program, graduate-level science courses and research experiences are designed and implemented specifically for the UTR by active Earth…

  11. An Examination of the Effects of Flow on Learning in a Graduate-Level Introductory Operations Management Course

    Science.gov (United States)

    Klein, Barbara D.; Rossin, Don; Guo, Yi Maggie; Ro, Young K.

    2010-01-01

    The authors investigated the effects of flow on learning outcomes in a graduate-level operations management course. Flow was assessed through an overall flow score, four dimensions of flow, and three characteristics of flow activities. Learning outcomes were measured objectively through multiple-choice quiz scores and subjectively using measures…

  12. Job Requirements for Marketing Graduates: Are There Differences in the Knowledge, Skills, and Personal Attributes Needed for Different Salary Levels?

    Science.gov (United States)

    Schlee, Regina Pefanis; Karns, Gary L.

    2017-01-01

    Several studies in the business press and in the marketing literature point to a "transformation" of marketing caused by the availability of large amounts of data for marketing analysis and planning. However, the effects of the integration of technology on entry-level jobs for marketing graduates have not been fully explored. This study…

  13. The Power of Relationship Building in International Short-Term Field Study Experiences at the Graduate Level

    Science.gov (United States)

    Davis, Brittany; Coryell, Joellen E.

    2016-01-01

    This paper derives from a case study of a 10-day cross-cultural field study experience held in Italy in which graduate students from master and doctoral levels in adult education participated. During group reflections, several students who participated in the course expressed the value of learning through personal connections made with students as…

  14. High-level algorithm prototyping: An example extending the TVR-DART algorithm

    NARCIS (Netherlands)

    A. Ringh (Axel); X. Zhuge (Jason); W.J. Palenstijn (Willem Jan); K.J. Batenburg (Joost); O. Öktem (Ozan)

    2017-01-01

    textabstractOperator Discretization Library (ODL) is an open-source Python library for prototyping reconstruction methods for inverse problems, and ASTRA is a high-performance Matlab/Python toolbox for large-scale tomographic reconstruction. The paper demonstrates the feasibility of combining ODL

  15. Bringing us back to our creative senses: Fostering creativity in graduate-level nursing education: A literary review.

    Science.gov (United States)

    Duhamel, Karen V

    2016-10-01

    The purpose of this paper is to explore empirical findings of five studies related to graduate-level nurse educators' and nursing students' perceptions about the roles of creativity and creative problem-solving in traditional and innovative pedagogies, and examines conceptual differences in the value of creativity from teacher and student viewpoints. Five peer-reviewed scholarly articles; professional nursing organizations; conceptual frameworks of noted scholars specializing in creativity and creative problem-solving; business-related sources; primary and secondary sources of esteemed nurse scholars. Quantitative and qualitative studies were examined that used a variety of methodologies, including surveys, focus groups, 1:1 interviews, and convenience sampling of both nursing and non-nursing college students and faculty. Innovative teaching strategies supported student creativity and creative problem-solving development. Teacher personality traits and teaching styles receptive to students' needs led to greater student success in creative development. Adequate time allocation and perceived usefulness of creativity and creative problem-solving by graduate-level nurse educators must be reflected in classroom activities and course design. Findings indicated conservative teaching norms, evident in graduate nursing education today, should be revised to promote creativity and creative problem-solving development in graduate-level nursing students for best practice outcomes. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Evaluating a Web-based Graduate Level Nursing Ethics Course: Thumbs Up or Thumbs Down?

    Science.gov (United States)

    McAlpine, Heather; Lockerbie, Linda; Ramsay, Deyanne; Beaman, Sue

    2002-01-01

    Student and teacher opinions were obtained regarding a Web-based ethics course for nursing graduate students. Both groups had positive views of online discussions; critical and reflective thinking was enhanced; technical difficulties were overcome with the help of expert support services; compressed time frame was a drawback; and ways to enhance…

  17. The Next Generation of Scientists: Examining the Experiences of Graduate Students in Network-Level Social-Ecological Science

    Directory of Open Access Journals (Sweden)

    Michele Romolini

    2013-09-01

    Full Text Available By integrating the research and resources of hundreds of scientists from dozens of institutions, network-level science is fast becoming one scientific model of choice to address complex problems. In the pursuit to confront pressing environmental issues such as climate change, many scientists, practitioners, policy makers, and institutions are promoting network-level research that integrates the social and ecological sciences. To understand how this scientific trend is unfolding among rising scientists, we examined how graduate students experienced one such emergent social-ecological research initiative, Integrated Science for Society and Environment, within the large-scale, geographically distributed Long Term Ecological Research (LTER Network. Through workshops, surveys, and interviews, we found that graduate students faced challenges in how they conceptualized and practiced social-ecological research within the LTER Network. We have presented these conceptual challenges at three scales: the individual/project, the LTER site, and the LTER Network. The level of student engagement with and knowledge of the LTER Network was varied, and students faced different institutional, cultural, and logistic barriers to practicing social-ecological research. These types of challenges are unlikely to be unique to LTER graduate students; thus, our findings are relevant to other scientific networks implementing new social-ecological research initiatives.

  18. PyGirl: Generating Whole-System VMs from High-Level Prototypes Using PyPy

    Science.gov (United States)

    Bruni, Camillo; Verwaest, Toon

    Virtual machines (VMs) emulating hardware devices are generally implemented in low-level languages for performance reasons. This results in unmaintainable systems that are difficult to understand. In this paper we report on our experience using the PyPy toolchain to improve the portability and reduce the complexity of whole-system VM implementations. As a case study we implement a VM prototype for a Nintendo Game Boy, called PyGirl, in which the high-level model is separated from low-level VM implementation issues. We shed light on the process of refactoring from a low-level VM implementation in Java to a high-level model in RPython. We show that our whole-system VM written with PyPy is significantly less complex than standard implementations, without substantial loss in performance.

  19. Online Teaching and Learning at the Graduate School Level: Student Perceptions on Discussion Boards v. Synchronous Communication

    Directory of Open Access Journals (Sweden)

    Christopher N. Amos Sr.

    2014-06-01

    Full Text Available This paper examines a group of graduate students and their previous experiences with online education, various teaching and learning online tools, and their perceptions on the effectiveness of these tools as it relates to their learning, interpersonal skills and communication. This paper presents the graduate student's self-reported educational experience at a regional state university in the southeast United States in a 100% online Master's Degree program. The data was collected through the use of a 28 open-ended question survey, which was completed by a group of 127 graduate students and the findings produced six main findings, which were: 1 The respondents indicated at a high percentage (85% a high level (level 4, 5 and 6 of technology use and understanding. 2 The majority of the respondents (97% indicated they preferred live synchronous sessions rather than discussion boards for learning content and communication. 3 The majority of the respondents (72% indicated that when choosing future courses, the inclusion of discussion boards in a course was not important (34% or somewhat unimportant (38%. 4 100% of the respondents indicated that Live Elluminate Sessions were Highly Effective (65% or Somewhat Effective (35%, as it pertained to understanding the content. 5 Respondents indicated that 59% (12% Highly Effective, 47% Somewhat Effective of the respondents indicated discussion boards as an impactful way of learning content at the graduate level. It also shows that 41% (22% Somewhat Ineffective, 19% Not Effective. This study helps universities identify the importance of synchronous learning in a digital format when delivering online teaching and learning. There is a clear change in the needs of students enrolled in 100% online courses, which will force university faculty to increase the synchronous interaction between them and their students and between the students and their peers. Keywords: Synchronous learning, discussion boards, Blackboard

  20. A new multidimensional model for quality evaluation of graduate-level education in nuclear technology

    International Nuclear Information System (INIS)

    Mioranza, Claudio; Aquino, Afonso Rodrigues de

    2009-01-01

    Educational institutions have been highly concerned about the quality of products offered to the society, in order to obtain better results they need to provide a high degree quality service. The exclusive approach of this study is the development of a Multidimensional Model for the Educational Quality Assessment, named MULTQUALED, based on quality standards and models used in other economic sectors. This model was developed to support the decision process, concerning the strategic actions for improving the quality of the graduate courses. Four data collection instruments were created, comprehending dimensions such as pedagogical, human resources and facilities regarding qualified and quantified actions for the continuous improvement of educational quality management process. The study was applied to the Nuclear Technology stricto sensu Graduate Program from the Instituto de Pesquisas Energeticas e Nucleares, IPEN-CNEN/SP. (author)

  1. Nanocommunication design in graduate-level education and research training programs at Osaka University

    OpenAIRE

    Sekiya, Mizuki; An, SoonHwa; Ata, Masafumi

    2014-01-01

    After more than ten years of strategic investment research and development supported by government policies on science and technology, nanotechnology in Japan is making a transition from the knowledge creation stage of exploratory research to the stage of making the outcomes available for the benefit of society as a whole. Osaka University has been proactive in discussions about the relationship between nanotechnology and society as part of graduate and continuing education programs. These pr...

  2. Architectural prototyping

    DEFF Research Database (Denmark)

    Bardram, Jakob Eyvind; Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2004-01-01

    A major part of software architecture design is learning how specific architectural designs balance the concerns of stakeholders. We explore the notion of "architectural prototypes", correspondingly architectural prototyping, as a means of using executable prototypes to investigate stakeholders...

  3. Financing physical therapy doctoral education: methods used by entry-level students and the financial impact after graduation.

    Science.gov (United States)

    Thompson, Kris; Coon, Jill; Handford, Leandrea

    2011-01-01

    With the move to the doctor of physical therapy (DPT) degree and increasing tuition costs, there is concern about financing entry-level education. The purposes of this study were to identify how students finance their DPT education and to describe the financial impact after graduation. A written survey was used to collect data on financing DPT education, student debt, and the financial impact on graduates. There were 92 subjects who had graduated from one program. Frequencies as well as nonparametric statistics using cross-tabulations and chi-squared statistics were calculated. The response rate was 55%. Of the respondents, 86% had student loans, 66% worked during school, 57% received some family assistance, and 21% had some scholarship support. The amount of monthly loan repayment was not statistically related to the ability to save for a house, the ability to obtain a loan for a house or car, or the decision to have children. Saving for the future (p = 0.016) and lifestyle choices (p = 0.035) were related to the amount of monthly loan repayment. Major sources of funding were student loans, employment income, and/or family assistance. Respondent's ability to save for the future and lifestyle choices were negatively impacted when loan debt increased. Physical therapist education programs should consider offering debt planning and counseling.

  4. Structural Segmentation of Toru Takemitsu's Piece, Itinerant, by Advanced Level Music Graduate Students.

    Science.gov (United States)

    Ordoñana, Jose A; Laucirica, Ana

    2017-01-01

    This work attempts to study the way higher music graduate students segment a contemporary music work, Itinerant, and to understand the influence of musical feature on segmentation. It attempts to test the theory stating that saliences contribute to organising the music surface. The 42 students listened to the work several times and, in real time, they were requested to indicate the places on the score where they perceived structural boundaries. This work is characterised by its linearity, which could hinder identification of saliences and thereby, the establishment of structural boundaries. The participants show stability in the points of segmentation chosen. The results show significant coincidences among the participants in strategic places of the work, which leads us to conclude, in line with other researches, although in a work with different characteristics, that listeners can find a structural organisation in contemporary music that could allow them to understand it.

  5. Structural Segmentation of Toru Takemitsu’s Piece, Itinerant, by Advanced Level Music Graduate Students

    Directory of Open Access Journals (Sweden)

    Jose A. Ordoñana

    2017-05-01

    Full Text Available This work attempts to study the way higher music graduate students segment a contemporary music work, Itinerant, and to understand the influence of musical feature on segmentation. It attempts to test the theory stating that saliences contribute to organising the music surface. The 42 students listened to the work several times and, in real time, they were requested to indicate the places on the score where they perceived structural boundaries. This work is characterised by its linearity, which could hinder identification of saliences and thereby, the establishment of structural boundaries. The participants show stability in the points of segmentation chosen. The results show significant coincidences among the participants in strategic places of the work, which leads us to conclude, in line with other researches, although in a work with different characteristics, that listeners can find a structural organisation in contemporary music that could allow them to understand it.

  6. Measurement of integrated flux of cosmic ray muons at sea level using the INO-ICAL prototype detector

    International Nuclear Information System (INIS)

    Pal, S.; Acharya, B.S.; Majumder, G.; Mondal, N.K.; Samuel, D.; Satyanarayana, B.

    2012-01-01

    The India-based Neutrino Observatory (INO) collaboration is planning to set-up a magnetized Iron-CALorimeter (ICAL) to study atmospheric neutrino oscillations with precise measurements of oscillations parameters. The ICAL uses 50 kton iron as target mass and about 28800 Resistive Plate Chambers (RPC) of 2 m × 2 m in area as active detector elements. As part of its R and D program, a prototype detector stack comprising 12 layers of RPCs of 1 m × 1 m in area has been set-up at Tata Institute of Fundamental Research (TIFR) to study the detector parameters using cosmic ray muons. We present here a study of muon flux measurement at sea level and lower latitude. (Site latitude: 18°54'N, longitude: 72°48'E.)

  7. Generic versus specific competencies of entry-level public health graduates: employers' perceptions in Poland, the UK, and the Netherlands.

    Science.gov (United States)

    Biesma, Regien G; Pavlova, Milena; Vaatstra, Rina; van Merode, Godefridus G; Czabanowska, Katarzyna; Smith, Tony; Groot, Wim

    2008-08-01

    Constant changes in society and the public health domain force public health professionals into new roles and the development of new competencies. Public health professionals will need to be trained to respond to this challenge. The aim of this comparative study among Poland, the UK and the Netherlands is to identify competence needs for Master of Public Health graduates entering the labour market from a European perspective. A self-administered questionnaire was sent to employers in the three countries, rating the importance of competency in public health on a master's level. In all three countries, interpersonal competencies, like team working and communication skills, are rated as highly important. However, employers in the UK and Poland generally rate public health specific competencies as much more important than their Dutch colleagues. It is concluded that while public health specific knowledge is providing a useful starting point for entry-level public health professionals, employers increasingly recognise the value of generic competencies such as communication and team working skills. The results suggest a stronger emphasis on teaching methods that encourage active learning and the integration of skills, which is crucial for enhancing graduates' employability, and foster an open attitude to multidisciplinary working, which is essential in modern health care.

  8. Nanocommunication design in graduate-level education and research training programs at Osaka University

    Science.gov (United States)

    Sekiya, Mizuki; An, SoonHwa; Ata, Masafumi

    2014-09-01

    After more than ten years of strategic investment research and development supported by government policies on science and technology, nanotechnology in Japan is making a transition from the knowledge creation stage of exploratory research to the stage of making the outcomes available for the benefit of society as a whole. Osaka University has been proactive in discussions about the relationship between nanotechnology and society as part of graduate and continuing education programs. These programs are intended to fulfill the social accountability obligation of scientists and corporations involved in R&D, and to deepen their understanding of the relationship between science and society. To meet those aims, the program has covered themes relating to overall public engagement relating to nanotechnology governance, such as risk management of nanomaterials, international standardization for nanotechnology, nanomeasurement, intellectual property management in an open innovation environment, and interactive communication with society. Nanotechnology is an emerging field of science and technology. This paper reports and comments on initiatives for public engagement on nanotechnology at Osaka University's Institute for NanoScience Design, which aims to create new technologies based on nanotechnology that can help realize a sustainable society.

  9. Determination of Exhaustion Levels and Fatigue of Graduate Students in Natural and Applied Science Institutes

    Directory of Open Access Journals (Sweden)

    Birkan BÜYÜKARIKAN

    2015-12-01

    Full Text Available Burnout is a negative situation that occurs triggered by chronic stress and leading to a reduction in the individual's cynicism and personal accomplishment. Education, which has significant effects on all stages of human life, may be exposed to situations that may pose barriers to success such as burnout. Graduate students studying the problems they experienced were particularly dissertation period, although in this case they caused the collapse spiritually may affect negatively their success. Especially as natural sciences, production, intensive research and projects works, are some of the problems identified which the students face during their research. In this study, the Maslach Burnout Inventory was employed in analysing the data which was obtained from 241 students in Turkey; frequency analysis, factor analysis and t and reliability test analysis were the analytical tools used. However; male student’s cynicism, in the course of work the students with emotional burnout and those using cigarette where found to have more fatigue in their livings.

  10. The relationship between psychological well-being and perceived wellness in graduate-level counseling students

    Directory of Open Access Journals (Sweden)

    Magy Martin

    2013-02-01

    Full Text Available Research has established that individuals who provide personal therapy to others should have stable personal and professional lives, and possess a keen and accurate perception of wellness. Unfortunately, sometimes students pursuing careers in counseling and psychotherapy have unresolved psychological issues that, if unresolved, could later affect them in their professional lives. Thus, the purpose of the study was to understand psychological well-being and perceived wellness in a sample of graduate students (N = 97 preparing to become counselors in a CACREP-accredited counseling program at a state university in Pennsylvania. It measured the participants' psychological well- being by the Scales of Psychological Well-Being (SPWB and their perception of wellness by the Perceived Wellness Survey (PWS. Multiple regression analysis revealed a significant relationship between psychological well-being and perceived wellness of counselors-in-training. The results of this study could have implications for additional problems such as the failure of self-care among counselors or the nonexistence or nonuse of adequate wellness assessment tools during counselor development. DOI: 10.18870/hlrc.v3i2.91

  11. Collaborative Prototyping

    DEFF Research Database (Denmark)

    Bogers, Marcel; Horst, Willem

    2014-01-01

    of the prototyping process, the actual prototype was used as a tool for communication or development, thus serving as a platform for the cross-fertilization of knowledge. In this way, collaborative prototyping leads to a better balance between functionality and usability; it translates usability problems into design......This paper presents an inductive study that shows how collaborative prototyping across functional, hierarchical, and organizational boundaries can improve the overall prototyping process. Our combined action research and case study approach provides new insights into how collaborative prototyping...... can provide a platform for prototype-driven problem solving in early new product development (NPD). Our findings have important implications for how to facilitate multistakeholder collaboration in prototyping and problem solving, and more generally for how to organize collaborative and open innovation...

  12. New Graduate Paramedics’ First and Emergency Aid Formal and Practical Training Levels and Perception of Competency

    Directory of Open Access Journals (Sweden)

    Cetin Kizilkan

    2009-08-01

    Full Text Available AIM: The aim of this study is to determine first and emergency aid formal and practical education levels and perception of adequacy of trainee medical noncommissioned officers who graduated from Gulhane Military Medical Academy Medical NCO Vocational School in 2007. METHOD: The study included 54 trainee medical NCOs who had graduated from Gulhane Military Medical Academy Medical NCO Vocational School in 2007. The data were collected by a questionnaire developed by the investigators. RESULTS: Of the participants 79,6 % stated that he had never used the defibrillator, 33,3 % had never made hemorrhage control, 53,7% had never done fracture stabilization, 90,7% expressed himself adequate in “Intravenous (IV cannulation”, 98,2% in “hemorrhage control” and 72,2% in “Firearms wounds management”. In the exam including 10 questions nobody answered all the questions correctly and correct answers average was 5.9 ± 1.3 (minimum 3, maximum 9. CONCLUSION: Having the medical NCOs in a training program before they start service would be useful. Revision of the training program for medical NCOs according to the findings of our study especially in competency giving practical training would help the training of NCOs. Skills related to combat casualty care of NCOs should be promoted. Bu arastirma 13 ncu Balkan Askeri Tip Komitesi Kongresinde poster bildiri olarak sunulmustur. [TAF Prev Med Bull 2009; 8(4.000: 291-296

  13. Use of social media in graduate-level medical humanities education: two pilot studies from Penn State College of Medicine.

    Science.gov (United States)

    George, Daniel R; Dellasega, Cheryl

    2011-01-01

    Social media strategies in education have gained attention for undergraduate students, but there has been relatively little application with graduate populations in medicine. To use and evaluate the integration of new social media tools into the curricula of two graduate-level medical humanities electives offered to 4th-year students at Penn State College of Medicine. Instructors selected five social media tools--Twitter, YouTube, Flickr, blogging and Skype--to promote student learning. At the conclusion of each course, students provided quantitative and qualitative course evaluation. Students gave high favourability ratings to both courses, and expressed that the integration of social media into coursework augmented learning and collaboration. Others identified challenges including: demands on time, concerns about privacy and lack of facility with technology. Integrating social media tools into class activities appeared to offer manifold benefits over traditional classroom methods, including real-time communication outside of the classroom, connecting with medical experts, collaborative opportunities and enhanced creativity. Social media can augment learning opportunities within humanities curriculum in medical schools, and help students acquire tools and skill-sets for problem solving, networking, and collaboration. Command of technologies will be increasingly important to the practice of medicine in the twenty-first century.

  14. “We Learn by Doing”: Teaching and Learning Knowledge Translation Skills at the Graduate Level

    Directory of Open Access Journals (Sweden)

    Andrea V. Breen

    2018-04-01

    Full Text Available Knowledge Translation (KT is increasingly a requirement for scholars and non-academics working in applied settings. However, few programs provide explicit training in KT. In this article we systematically explore our experiences as a multi-disciplinary group of course facilitators and students in a newly redeveloped graduate course in Evidence Based Practice and Knowledge Translation. The course was designed to emphasize handson learning, collaboration and community engagement. We reflect on the challenges we faced and the skills, knowledge and opportunities that students gained as they developed and implemented community-based KT strategies relating to refugee resettlement, young carers, and consumer attitudes, behaviour and values around food purchasing decisions. We conclude by providing recommendations for instructors and institutions for implementing learning experiences in KT that are designed for real-world impact. L’application des connaissances (AC est devenue une exigence de plus en plus fréquente pour les chercheurs et les personnes qui travaillent dans les milieux non universitaires. Toutefois, peu de programmes offrent une formation explicite en AC. Dans cet article, nous explorons systématiquement nos expériences en tant que groupe pluridisciplinaire formé de responsables de cours et d’étudiants dans un cours de cycle supérieur nouvellement remanié portant sur la pratique fondée sur les données probantes et l’application des connaissances. Le cours a été conçu pour mettre en valeur l’apprentissage pratique, la collaboration et l’engagement communautaire. Nous réfléchissons aux défis auxquels nous avons été confrontés ainsi qu’aux compétences, aux connaissances et aux opportunités que les étudiants ont acquis en développant et mettant en pratique des stratégies d’AC en milieu communautaire sur les thèmes de la réinstallation des réfugiés, des jeunes aidants et des attitudes, comportements et

  15. An Exploratory Study of Effective Online Learning: Assessing Satisfaction Levels of Graduate Students of Mathematics Education Associated with Human and Design Factors of an Online Course

    Directory of Open Access Journals (Sweden)

    Joohi Lee

    2014-02-01

    Full Text Available This exploratory research project investigated graduate students’ satisfaction levels with online learning associated with human (professor/instructor and instructional associate and design factors (course structure and technical aspects using a survey study. A total of 81 graduate students (master’s students who majored in math and science education enrolled in an online math methods course (Conceptual Geometry participated in this study. According to the results of this study, student satisfaction level is closely associated with clear guidelines on assignment, rubrics, and constructive feedback. In addition, student satisfaction level is related to professor’s (or course instructor’s knowledge of materials.

  16. SOCIAL-ECONOMIC ASPECTS REGARDING EMPLOYMENT AND ACTIVITY OF HIGHER EDUCATION GRADUATES FROM THE UNIVERSITY OF PETROŞANI AND AT NATIONAL LEVEL

    Directory of Open Access Journals (Sweden)

    ILIE RĂSCOLEAN

    2012-10-01

    Full Text Available The paper presents the problems met by the graduates of the bachelor program in Petroşani University and at national level, promotion 2009, in looking for employment and finding a job. The correlation/lack of correlation between the academic offer of professionals and demand on the market is also observed. The demand is much under the offer, the employment market absorbing in the respective professional education only 15% of the graduates at institutional level and 27% at national level.

  17. Investigation of the teaching cognition and capabilities of clinical advisers for masters degree level nursing specialty graduate students

    Directory of Open Access Journals (Sweden)

    Xiao-Lei Zhao

    2014-03-01

    Conclusion: Clinical advisers for nursing specialty graduate students in our survey were generally inexperienced with regarding to training and culturing nursing graduate students. These advisers were prepared for core teaching competency, but were not qualified to conduct scientific research. Based on these results, it would be beneficial to provide the clinical advisers more training on teaching cognition for graduate students and improve their competency to perform scientific research.

  18. Improving Chemistry Education by Offering Salient Technology Training to Preservice Teachers: A Graduate-Level Course on Using Software to Teach Chemistry

    Science.gov (United States)

    Tofan, Daniel C.

    2009-01-01

    This paper describes an upper-level undergraduate and graduate-level course on computers in chemical education that was developed and offered for the first time in Fall 2007. The course provides future chemistry teachers with exposure to current software tools that can improve productivity in teaching, curriculum development, and education…

  19. Implementation and impact of experiential learning in a graduate level teacher education program: An example from a Canadian universit

    Directory of Open Access Journals (Sweden)

    Cher M. Hill

    2016-11-01

    Full Text Available Teacher inquiry, in which teachers study their own professional practice, is currently a popular form of experiential learning that is considered a powerful tool to bring about effective change in teaching and learning. Little empirical evidence, however, exists to explain precisely if and how this pedagogical methodology moves teachers toward transformation of practice. Using grounded theory methodology, we examined twelve end of term graduate level learning portfolios and administered a survey to 336 in-service teachers enrolled in a two-year graduate diploma program in the Faculty of Education at Simon Fraser University, Canada. We found powerful evidence that our programs were highly impactful, with 94% of teachers reporting transformative learning within the second year of the program. Using portfolio data we examined the process of the teacher transformations. Our findings revealed that teachers’ abilities to interrogate their subjective-objective stance deepened their experiential learning. Using three case studies we exemplify how transformative pathways were formulated and conclude with a discussion of the implications of learning through experience, including the value of student-generated learning goals, continuous interfacing of theory and practice, seeing your ‘teaching’ through the eyes of your students/colleagues or parents, and the power of living your research question in the context of your own classroom and school setting. We end the paper on a cautionary note pointing out the vulnerability of programs of this nature in an era of accountability, standardization, quality control, and risk management all of which eclipse approaches that focus on authentic practical problems and student generated solutions.

  20. Prototyping Practice

    DEFF Research Database (Denmark)

    Ramsgaard Thomsen, Mette; Tamke, Martin

    2015-01-01

    This paper examines the role of the prototyping in digital architecture. During the past decade, a new research field has emerged exploring the digital technology’s impact on the way we think, design and build our environment. In this practice the prototype, the pavilion, installation or demonstr......This paper examines the role of the prototyping in digital architecture. During the past decade, a new research field has emerged exploring the digital technology’s impact on the way we think, design and build our environment. In this practice the prototype, the pavilion, installation...

  1. Technique for estimating the sound power level radiated by pneumatic rock drills and the evaluation of a CSIR prototype rock drill with engineering noise controls

    CSIR Research Space (South Africa)

    Kovalchik, PG

    2009-05-01

    Full Text Available and the radiation patterns in octave and 1/3 octave bands. Overall sound power level is also determined. This paper also reports the results obtained by using this procedure to evaluate a SECO S215 standard production drill and a CSIR Miningtek prototype rock drill...

  2. Analysis of opinion about nuclear energy and sustainability in a graduate level population

    International Nuclear Information System (INIS)

    Meza L, C.D.; Arredondo S, C.

    2007-01-01

    The Mexican society has a modest knowledge of the nuclear energy, even at the participant students of superior education level in this survey is finds a scarce compression with regard to their obtaining, use and manage. As a result of the lack of interest of the same society and at the problems that know each other like they are: the pollutants that it produces those nuclear waste and the possible use or warlike end, a fear is believed about this energy type. In the Superior School of Physics and Mathematics there is the possibility to make studies so much at master degree level in the one fear of the nuclear energy and the applications of the same one in peaceful uses. However, particularly the studies at master level seem to be immersed in a crisis that requires of different supports to be resolved. For all it previous was thought in carrying out a survey inside a student population with superior level to know the opinion and the knowledge on the nuclear energy in Mexico. In this work the results of the survey are analyzed with the purpose of to determine which is the knowledge of the community mentioned regarding the other energy types, the impact that they have these in the environment, the sustenance of the same ones and in particular on knowledge about the nuclear energy considering the aspects before mentioned. With base had said analysis settles down that the interviewed community knows very little about the nuclear energy but they show interest to study and to obtain bigger information about the same one, for what is very important to diffuse but and better information on the nuclear energy to the population's strata, because it is of supposing that the rest of the population has erroneous information on the nuclear energy. In particular for the community of the Superior School of Physics and Mathematics the diffusion of all the benefits of the peaceful applications of the nuclear energy, including the capacity to generate enormous quantities and energy

  3. Assessing levels of similarity to a "psychodynamic prototype" in psychodynamic psychotherapy with children: a case study approach (preliminary findings

    Directory of Open Access Journals (Sweden)

    Marina Bento Gastaud

    2015-09-01

    Full Text Available Objective:To analyze the degree of similarity to a "psychodynamic prototype" during the first year of two children's once-weekly psychodynamic psychotherapy.Methods: This study used a longitudinal, descriptive, repeated-measures design based on the systematic case study method. Two male school children (here referred to as Walter and Peter and their therapists took part in the study. All sessions were video and audio recorded. Ten sessions from each case were selected for analysis in this preliminary study. Trained examiners (randomly selected in pairs independently and blindly evaluated each session using the Child Psychotherapy Q-Set (CPQ. Experts in psychodynamic therapy and cognitive behavioral therapy from several countries rated each of the 100 CPQ items with regard to how well it characterized a hypothetical ideal session of either treatment modality. A series of paired t tests comparing analogous adherence scores within each session were conducted.Results:There were no significant correlations between time elapsed and adherence to the prototypes. Walter's treatment adhered to both prototypes and Peter's treatment did not adhere to either prototype.Conclusion:Child psychotherapy theory and practice are not absolutely coincident. Real psychotherapy sessions do not necessarily resemble the ideal prototypes.

  4. Unikabeton Prototype

    DEFF Research Database (Denmark)

    Søndergaard, Asbjørn; Dombernowsky, Per

    2011-01-01

    The Unikabeton prototype structure was developed as the finalization of the cross-disciplinary research project Unikabeton, exploring the architectural potential in linking the computational process of topology optimisation with robot fabrication of concrete casting moulds. The project was elabor......The Unikabeton prototype structure was developed as the finalization of the cross-disciplinary research project Unikabeton, exploring the architectural potential in linking the computational process of topology optimisation with robot fabrication of concrete casting moulds. The project...... of Architecture was to develop a series of optimisation experiments, concluding in the design and optimisation of a full scale prototype concrete structure....

  5. Effects of a blended learning approach on student outcomes in a graduate-level public health course.

    Science.gov (United States)

    Kiviniemi, Marc T

    2014-03-11

    Blended learning approaches, in which in-person and online course components are combined in a single course, are rapidly increasing in health sciences education. Evidence for the relative effectiveness of blended learning versus more traditional course approaches is mixed. The impact of a blended learning approach on student learning in a graduate-level public health course was examined using a quasi-experimental, non-equivalent control group design. Exam scores and course point total data from a baseline, "traditional" approach semester (n = 28) was compared to that from a semester utilizing a blended learning approach (n = 38). In addition, student evaluations of the blended learning approach were evaluated. There was a statistically significant increase in student performance under the blended learning approach (final course point total d = 0.57; a medium effect size), even after accounting for previous academic performance. Moreover, student evaluations of the blended approach were very positive and the majority of students (83%) preferred the blended learning approach. Blended learning approaches may be an effective means of optimizing student learning and improving student performance in health sciences courses.

  6. A guide to writing a scientific paper: a focus on high school through graduate level student research.

    Science.gov (United States)

    Hesselbach, Renee A; Petering, David H; Berg, Craig A; Tomasiewicz, Henry; Weber, Daniel

    2012-12-01

    This article presents a detailed guide for high school through graduate level instructors that leads students to write effective and well-organized scientific papers. Interesting research emerges from the ability to ask questions, define problems, design experiments, analyze and interpret data, and make critical connections. This process is incomplete, unless new results are communicated to others because science fundamentally requires peer review and criticism to validate or discard proposed new knowledge. Thus, a concise and clearly written research paper is a critical step in the scientific process and is important for young researchers as they are mastering how to express scientific concepts and understanding. Moreover, learning to write a research paper provides a tool to improve science literacy as indicated in the National Research Council's National Science Education Standards (1996), and A Framework for K-12 Science Education (2011), the underlying foundation for the Next Generation Science Standards currently being developed. Background information explains the importance of peer review and communicating results, along with details of each critical component, the Abstract, Introduction, Methods, Results, and Discussion. Specific steps essential to helping students write clear and coherent research papers that follow a logical format, use effective communication, and develop scientific inquiry are described.

  7. Effects of a blended learning approach on student outcomes in a graduate-level public health course

    Science.gov (United States)

    2014-01-01

    Background Blended learning approaches, in which in-person and online course components are combined in a single course, are rapidly increasing in health sciences education. Evidence for the relative effectiveness of blended learning versus more traditional course approaches is mixed. Method The impact of a blended learning approach on student learning in a graduate-level public health course was examined using a quasi-experimental, non-equivalent control group design. Exam scores and course point total data from a baseline, “traditional” approach semester (n = 28) was compared to that from a semester utilizing a blended learning approach (n = 38). In addition, student evaluations of the blended learning approach were evaluated. Results There was a statistically significant increase in student performance under the blended learning approach (final course point total d = 0.57; a medium effect size), even after accounting for previous academic performance. Moreover, student evaluations of the blended approach were very positive and the majority of students (83%) preferred the blended learning approach. Conclusions Blended learning approaches may be an effective means of optimizing student learning and improving student performance in health sciences courses. PMID:24612923

  8. The acquisition and transfer of knowledge of electrokinetic-hydrodynamics (EKHD) fundamentals: an introductory graduate-level course

    Science.gov (United States)

    Pascal, Jennifer; Tíjaro-Rojas, Rocío; Oyanader, Mario A.; Arce, Pedro E.

    2017-09-01

    Relevant engineering applications, such as bioseparation of proteins and DNA, soil-cleaning, motion of colloidal particles in different media, electrical field-based cancer treatments, and the cleaning of surfaces and coating flows, belongs to the family of 'Applied Field Sensitive Process Technologies' requiring an external field to move solutes in a fluid within a fibrous (or porous) domain. This field incorporates an additional variable that makes the analysis very challenging and can create for the student a number of new problems to solve. A graduate-level course, based on active-learning approaches and High Performance Learning Environments, where transfer of knowledge plays a key role, was designed by the Chemical Engineering Department at Tennessee Technological University. This course, where the fundamentals principles of EKHD were taught to science, engineering and technology students was designed by the Chemical Engineering Department at the Tennessee Technological University, Cookeville, TN. An important number of these students were able to grasp the tools required to advance their research projects that led to numerous technical presentations in professional society meetings and publications in peered-reviewed journals.

  9. Solution Prototype

    DEFF Research Database (Denmark)

    Efeoglu, Arkin; Møller, Charles; Serie, Michel

    2013-01-01

    This paper outlines an artifact building and evaluation proposal. Design Science Research (DSR) studies usually consider encapsulated artifact that have relationships with other artifacts. The solution prototype as a composed artifact demands for a more comprehensive consideration in its systematic...... environment. The solution prototype that is composed from blending product and service prototype has particular impacts on the dualism of DSR’s “Build” and “Evaluate”. Since the mix between product and service prototyping can be varied, there is a demand for a more agile and iterative framework. Van de Ven......’s research framework seems to fit this purpose. Van de Ven allows for an iterative research approach to problem solving with flexible starting point. The research activity is the result between the iteration of two dimensions. This framework focuses on the natural evaluation, particularly on ex...

  10. The stabilizing potential of anterior, posterior and combined techniques for the reconstruction of a 2-level cervical corpectomy model: biomechanical study and first results of ATPS prototyping.

    Science.gov (United States)

    Koller, Heiko; Schmidt, Rene; Mayer, Michael; Hitzl, Wolfgang; Zenner, Juliane; Midderhoff, Stefan; Middendorf, Stefan; Graf, Nicolaus; Gräf, Nicolaus; Resch, H; Wilke, Hans-Joachim; Willke, Hans-Joachim

    2010-12-01

    Clinical studies reported frequent failure with anterior instrumented multilevel cervical corpectomies. Hence, posterior augmentation was recommended but necessitates a second approach. Thus, an author group evaluated the feasibility, pull-out characteristics, and accuracy of anterior transpedicular screw (ATPS) fixation. Although first success with clinical application of ATPS has already been reported, no data exist on biomechanical characteristics of an ATPS-plate system enabling transpedicular end-level fixation in advanced instabilities. Therefore, we evaluated biomechanical qualities of an ATPS prototype C4-C7 for reduction of range of motion (ROM) and primary stability in a non-destructive setup among five constructs: anterior plate, posterior all-lateral mass screw construct, posterior construct with lateral mass screws C5 + C6 and end-level fixation using pedicle screws unilaterally or bilaterally, and a 360° construct. 12 human spines C3-T1 were divided into two groups. Four constructs were tested in group 1 and three in group 2; the ATPS prototypes were tested in both groups. Specimens were subjected to flexibility test in a spine motion tester at intact state and after 2-level corpectomy C5-C6 with subsequent reconstruction using a distractable cage and one of the osteosynthesis mentioned above. ROM in flexion-extension, axial rotation, and lateral bending was reported as normalized values. All instrumentations but the anterior plate showed significant reduction of ROM for all directions compared to the intact state. The 360° construct outperformed all others in terms of reducing ROM. While there were no significant differences between the 360° and posterior constructs in flexion-extension and lateral bending, the 360° constructs were significantly more stable in axial rotation. Concerning primary stability of ATPS prototypes, there were no significant differences compared to posterior-only constructs in flexion-extension and axial rotation. The

  11. PRMS Data Warehousing Prototype

    Science.gov (United States)

    Guruvadoo, Eranna K.

    2002-01-01

    Project and Resource Management System (PRMS) is a web-based, mid-level management tool developed at KSC to provide a unified enterprise framework for Project and Mission management. The addition of a data warehouse as a strategic component to the PRMS is investigated through the analysis, design and implementation processes of a data warehouse prototype. As a proof of concept, a demonstration of the prototype with its OLAP's technology for multidimensional data analysis is made. The results of the data analysis and the design constraints are discussed. The prototype can be used to motivate interest and support for an operational data warehouse.

  12. High-Level Design for Ultra-Fast Software Defined Radio Prototyping on Multi-Processors Heterogeneous Platforms

    OpenAIRE

    Moy , Christophe; Raulet , Mickaël

    2010-01-01

    International audience; The design of Software Defined Radio (SDR) equipments (terminals, base stations, etc.) is still very challenging. We propose here a design methodology for ultra-fast prototyping on heterogeneous platforms made of GPPs (General Purpose Processors), DSPs (Digital Signal Processors) and FPGAs (Field Programmable Gate Array). Lying on a component-based approach, the methodology mainly aims at automating as much as possible the design from an algorithmic validation to a mul...

  13. The continuous education as a process of academic studies for graduate students at high educational levels in Sonora (Mexico

    Directory of Open Access Journals (Sweden)

    Josefina Andrade Paco

    2009-12-01

    Full Text Available The continuous education, that the productive sector demands, is not only the accumulation of new knowledge, supported inthe education-learning process, but also a focus on the new tendencies that the labor field demands, where the universities havethe opportunity to extend their involvement, through graduations or specializations, that contribute the strength of the acquiredskills in the classroom. The objective is to know the kind of graduation interests that motivate the graduates, as a process ofcontinuous education. The study is based on the application of a questionnaire to 50 students of different degrees from publicuniversities in Sonora, whose excellent results are: 51% of those surveyed, indicate that at the end of their degree they do notobtain the tools to compete in their labor field. 92% of the students mention that universities should offer within the educativeprogram some area of financial or specialization, related to other disciplines. Another important data is that the financial areasthat graduates prefer are related to the social administrative and financial areas and in smaller proportion they prefer the engineeringdisciplines. 70% of those surveyed, indicate that universities have infrastructure, learning spaces and the skilled humanresources to offer this type of courses. The conclusion of this work, is that public universities follow training programs related tocertain areas and disciplines, centered on the student and learning, like part of their formation, but they do not have the educativeflexibility and the graduates will need to know other disciplines to complement their professional education.

  14. Software Prototyping

    Science.gov (United States)

    Del Fiol, Guilherme; Hanseler, Haley; Crouch, Barbara Insley; Cummins, Mollie R.

    2016-01-01

    Summary Background Health information exchange (HIE) between Poison Control Centers (PCCs) and Emergency Departments (EDs) could improve care of poisoned patients. However, PCC information systems are not designed to facilitate HIE with EDs; therefore, we are developing specialized software to support HIE within the normal workflow of the PCC using user-centered design and rapid prototyping. Objective To describe the design of an HIE dashboard and the refinement of user requirements through rapid prototyping. Methods Using previously elicited user requirements, we designed low-fidelity sketches of designs on paper with iterative refinement. Next, we designed an interactive high-fidelity prototype and conducted scenario-based usability tests with end users. Users were asked to think aloud while accomplishing tasks related to a case vignette. After testing, the users provided feedback and evaluated the prototype using the System Usability Scale (SUS). Results Survey results from three users provided useful feedback that was then incorporated into the design. After achieving a stable design, we used the prototype itself as the specification for development of the actual software. Benefits of prototyping included having 1) subject-matter experts heavily involved with the design; 2) flexibility to make rapid changes, 3) the ability to minimize software development efforts early in the design stage; 4) rapid finalization of requirements; 5) early visualization of designs; 6) and a powerful vehicle for communication of the design to the programmers. Challenges included 1) time and effort to develop the prototypes and case scenarios; 2) no simulation of system performance; 3) not having all proposed functionality available in the final product; and 4) missing needed data elements in the PCC information system. PMID:27081404

  15. Prototype development and test results of a continuous ambient air monitoring system for hydrazine at the 10 ppb level

    Science.gov (United States)

    Meneghelli, Barry; Parrish, Clyde; Barile, Ron; Lueck, Dale E.

    1995-01-01

    into the dilute acid stream. The HVAM system provides two measurement ranges (threshold limit value (TLV): 10 to 1000 parts per billion (ppb)/LEAK: 100 ppb to 10 parts per million (ppm)). The LEAK range is created by dilution of the sulfuric acid/hydrazine liquid sample with pure water. This dual range capability permits the analyzer to quantify ambient air samples whose hydrazine concentrations range from 10 ppb to as high as 10 ppm. The laboratory and field prototypes have demonstrated total system response times on the order of 10 to 12 minutes for samples ranging from 10 to 900 ppb in the lLV mode and is greater than 2 minutes for samples ranging from 100 to 1300 ppb in the LEAK mode. Service intervals of over 3 months have been demonstrated for continuous 24 hour/day, 7 day/week usage. The HVAM is made up of a purged cabinet that contains power supplies, RS422 signal transmission capabilities, a UPS, an on-site warning system, and a Line Replaceable Unit (LRU). The LRU includes all of the liquid flow system, the analyzer, the control/data system microprocessor and assorted flow and liquid-level sensors.

  16. A Science Faculty's Transformation of Nature of Science Understanding into His Teaching Graduate Level Chemistry Course

    Science.gov (United States)

    Aydin, Sevgi

    2015-01-01

    This is an interpretive case study to examine the teaching of an experienced science faculty who had a strong interest in teaching undergraduate and graduate science courses and nature of science specifically. It was interested in how he transformed knowledge from his experience as a scientist and his ideas about nature of science into forms…

  17. Graduate Students' Poster Session Experiences: Do Levels of Academic Self-Efficacy and Individual Characteristics Play a Role?

    Science.gov (United States)

    Filipova, Anna A.

    2016-01-01

    This cross-sectional study assesses the effectiveness of poster session presentations as an alternative to traditional presentations in the public administration classroom. It also determined if graduate students' college academic self-efficacy and background characteristics impacted poster performance outcomes. Data were collected over four…

  18. Codesign Graduates 2017

    DEFF Research Database (Denmark)

    2017-01-01

    of addressing complex problems by applying a codesign approach involves a broad range of methods and outcomes. With a focus on design dialogue and collaboration, the codesigner’s toolbox encompass tools and media that are: • Documentary-oriented (audio, image, and video recording to enrich the capture...... and comunication of, for example, field research) • Artefact-oriented (prototyping in 2D and 3D, visualization techniques, design games, and props & probes) • Performance-oriented (staging events, scenarios, role play) Codesign graduates are qualified to do research and work within design consultancies. They can...

  19. Calculating graduation rates.

    Science.gov (United States)

    Starck, Patricia L; Love, Karen; McPherson, Robert

    2008-01-01

    In recent years, the focus has been on increasing the number of registered nurse (RN) graduates. Numerous states have initiated programs to increase the number and quality of students entering nursing programs, and to expand the capacity of their programs to enroll additional qualified students. However, little attention has been focused on an equally, if not more, effective method for increasing the number of RNs produced-increasing the graduation rate of students enrolling. This article describes a project that undertook the task of compiling graduation data for 15 entry-level programs, standardizing terms and calculations for compiling the data, and producing a regional report on graduation rates of RN students overall and by type of program. Methodology is outlined in this article. This effort produced results that were surprising to program deans and directors and is expected to produce greater collaborative efforts to improve these rates both locally and statewide.

  20. Librarians Aren’t Born with Information Superpowers: Leveling the Playing Field for Incoming Library Science Graduate Students

    Directory of Open Access Journals (Sweden)

    Annette Lamb

    2016-12-01

    Full Text Available Students enter the library science graduate program with a wide range of information and technology skills. Today’s graduate courses require students to be able to build web-based pathfinders, use social media, and search databases. This article examines the design and development of an introductory course for incoming library science graduate students that personalizes instruction and ensures that each student is ready for the rigors of graduate school. Taken during the first semester of the program, this introductory course teaches information and technology skills and concepts that are core to library science. The author explores the process of creating a computer-based course that addresses the diverse needs of this student population. Using a systematic approach to instructional design and development, the author outlines the steps in designing, developing, implementing, and evaluating an online, self-paced graduate course. Based on the Dick and Carey model, the process included identifying the instructional goals, conducting an instructional analysis, analyzing learners and contexts, writing performance objectives, developing assessment instruments, developing instructional strategies, developing and selecting instructional materials, designing and conducting formative evaluation of instruction, revising instruction, and designing and conducting summative evaluation. This process produced effective, efficient, and appealing instructional materials. Les étudiants entament un programme d’études supérieures en sciences de l’information avec une panoplie d’habiletés en matière d’information et de technologie. Les cours d’études supérieures requièrent aujourd’hui que les étudiants puissent créer des guides en ligne, utiliser des médias sociaux et interroger des bases de données. Cet article porte sur la conception et le développement d’un cours d’introduction qui est offert aux nouveaux étudiants diplômés en

  1. MIND performance and prototyping

    International Nuclear Information System (INIS)

    Cervera-Villanueva, A.

    2008-01-01

    The performance of MIND (Magnetised Iron Neutrino Detector) at a neutrino factory has been revisited in a new analysis. In particular, the low neutrino energy region is studied, obtaining an efficiency plateau around 5 GeV for a background level below 10 -3 . A first look has been given into the detector optimisation and prototyping

  2. Mobile prototyping with Axure 7

    CERN Document Server

    Hacker, Will

    2013-01-01

    This book is a step-by-step tutorial which includes hands-on examples and downloadable Axure files to get you started with mobile prototyping immediately. You will learn how to develop an application from scratch, and will be guided through each and every step.If you are a mobile-centric developer/designer, or someone who would like to take their Axure prototyping skills to the next level and start designing and testing mobile prototypes, this book is ideal for you. You should be familiar with prototyping and Axure specifically, before you read this book.

  3. Development and application of multidimensional model for the quality evaluation of graduate-level education in program of the IPEN

    International Nuclear Information System (INIS)

    Mioranza, Claudio

    2009-01-01

    Educational institutions have been highly concerned about the quality of products offered to the society, in order to obtain better results they need to provide a high degree quality service. The exclusive approach of this study was the development of a Multidimensional Model for the Educational Quality Assessment, named MULTQUALED. The model was based on quality standards and models used in other economic sectors where were created four data collection instruments, comprehending dimensions such as pedagogical, human resources and facilities regarding qualified and quantified actions for the continuous improvement of educational quality management process. The study was applied to the Nuclear Technology Stricto Sensu Graduate Program from the Instituto de Pesquisas Energeticas e Nucleares from Sao Paulo (IPEN-CNEN/SP). The information obtained from the application of MULTQUALED evidenced fragilities and positive aspects that support the decision process with strategic actions contributing with the continuous improvement of the program education quality. (author)

  4. Exploring How Second Grade Elementary Teachers Translate Their Nature of Science Views into Classroom Practice After a Graduate Level Nature of Science Course

    Science.gov (United States)

    Deniz, Hasan; Adibelli, Elif

    2015-12-01

    The main purpose of this study was to explore the factors mediating the translation of second grade teachers' nature of science (NOS) views into classroom practice after completing a graduate level NOS course. Four second grade in-service elementary teachers comprised the sample of this study. Data were collected from several sources during the course of this study. The primary data sources were (a) assessment of the elementary teachers' NOS views before and after the graduate level NOS course using the Views of Nature of Science Questionnaire Version B (VNOS-B) (Lederman et al., 2002) coupled with interviews, and (b) a classroom observation and videotaped recording of the elementary teachers' best NOS lessons coupled with interview. We identified three distinct but related factors that mediated the translation of NOS views into classroom practice: the teachers' perspectives about the developmental appropriateness of the NOS aspect, the teachers' selection of target NOS aspects, and the relative importance placed by teachers on each NOS aspect.

  5. Combining on-hardware prototyping and high-level simulation for DSE of multi-ASIP systems

    NARCIS (Netherlands)

    Meloni, P.; Pomata, S.; Raffo, L.; Piscitelli, R.; Pimentel, A.D.; McAllister, J.; Bhattacharyya, S.

    2012-01-01

    Modern heterogeneous multi-processor embedded systems very often expose to the designer a large number of degrees of freedom, related to the application partitioning/mapping and to the component- and system-level architecture composition. The number is even larger when the designer targets systems

  6. Development of prototype micro wind energy system with adjustable blade pitch for experimentation purposes at laboratory level

    International Nuclear Information System (INIS)

    Ashraf, M.M.; Iqbal, M.

    2014-01-01

    In this paper, the design of an efficient, operational and productive model of micro wind energy system has been proposed for experimentation purposes at laboratory level. The proposed model constitutes a proficient Horizontal Axis Wind Turbine (HAWT) model with multi-stage pulley system as a gear box and adjustable blade pitch. The wind turbine is coupled to Axial Flux Permanent Magnet Generator (AFPMG). The power density parameter of fabricated AFPMG has been improved to 35.7%. A wind tunnel is placed in front of wind turbine which behaves as the operational source of wind for proposed model. Multiple case studies: demonstration of different components of wind energy system, effect of variable wind speed, effect of variable blade pitch, effect of variable electrical loading, effect of variable pulley ratio, voltage regulation of AFPMG, runaway speed test of HAWT and peripheral speed test of AFPMG are successfully performed on this model. The results obtained from experiments show that proposed model is well suited for experimentation purposes at laboratory level. (author)

  7. Using standardized patients to assess the communication skills of graduating physicians for the comprehensive osteopathic medical licensing examination (COMLEX) level 2-performance evaluation (level 2-PE).

    Science.gov (United States)

    Weidner, Angela C; Gimpel, John R; Boulet, John R; Solomon, Mia

    2010-01-01

    Standardized patients can be trained to assess the communication and interpersonal skills of medical students and graduates. The purpose of this study is to present data to support the psychometric adequacy of the communication ratings provided by standardized patients. Using the data from testing of 3, 450 examinees over a 1-year period, a number of psychometric analyses were undertaken. These included a variance component analysis, the calculation of various validity coefficients, the comparison of communication ratings for select examinee cohorts and case characteristics, and the investigation of some potential sources of score invalidity. Communication skills scores are moderately correlated to other competencies (knowledge, skills) and may be influenced by candidate characteristics such as gender and English language proficiency. They are not dependant on the age of the examinees, the clinical case content, or the gender of the standardized patients. For a multistation assessment, a reasonably precise and valid estimate of a candidate's communication ability can be obtained from trained standardized patients.

  8. A multi-level rapid prototyping drill guide template reduces the perforation risk of pedicle screw placement in the lumbar and sacral spine.

    Science.gov (United States)

    Merc, Matjaz; Drstvensek, Igor; Vogrin, Matjaz; Brajlih, Tomaz; Recnik, Gregor

    2013-07-01

    The method of free-hand pedicle screw placement is generally safe although it carries potential risks. For this reason, several highly accurate computer-assisted systems were developed and are currently on the market. However, these devices have certain disadvantages. We have developed a method of pedicle screw placement in the lumbar and sacral region using a multi-level drill guide template, created with the rapid prototyping technology and have validated it in a clinical study. The aim of the study was to manufacture and evaluate the accuracy of a multi-level drill guide template for lumbar and first sacral pedicle screw placement and to compare it with the free-hand technique under fluoroscopy supervision. In 2011 and 2012, a randomized clinical trial was performed on 20 patients. 54 screws were implanted in the trial group using templates and 54 in the control group using the fluoroscopy-supervised free-hand technique. Furthermore, applicability for the first sacral level was tested. Preoperative CT-scans were taken and templates were designed using the selective laser sintering method. Postoperative evaluation and statistical analysis of pedicle violation, displacement, screw length and deviation were performed for both groups. The incidence of cortex perforation was significantly reduced in the template group; likewise, the deviation and displacement level of screws in the sagittal plane. In both groups there was no significantly important difference in deviation and displacement level in the transversal plane as not in pedicle screw length. The results for the first sacral level resembled the main investigated group. The method significantly lowers the incidence of cortex perforation and is therefore potentially applicable in clinical practice, especially in some selected cases. The applied method, however, carries a potential for errors during manufacturing and practical usage and therefore still requires further improvements.

  9. Courthouse Prototype Building

    Energy Technology Data Exchange (ETDEWEB)

    Malhotra, Mini [ORNL; New, Joshua Ryan [ORNL; Im, Piljae [ORNL

    2018-02-01

    represent a majority of courthouse buildings. However, collectively they comprise a small fraction of total courthouse floor area in the US. Spaces and operation of courthouse also varies depending on the court type (federal court vs state court; district, appellate, versus Supreme Court) and jurisdiction (general jurisdiction, general jurisdiction trial, or special courts). Based on the statistics on courthouses, general jurisdiction trial court is considered for the prototype model. The model is assumed to be a 4-courtroom, small, 72,000 sqft three-story building including a ground level/ basement.

  10. Nightshade Prototype Experiments (Silverleaf)

    Energy Technology Data Exchange (ETDEWEB)

    Danielson, Jeremy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bauer, Amy L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-12-23

    The Red Sage campaign is a series of subcritical dynamic plutonium experiments designed to measure ejecta. Nightshade, the first experiments in Red Sage scheduled for fiscal year 2019, will measure the amount of ejecta emission into vacuum from a double-­shocked plutonium surface. To address the major technical risks in Nightshade, a Level 2 milestone was developed for fiscal year 2016. Silverleaf, a series of four experiments, was executed at the Los Alamos National Laboratory in July and August 2016 to demonstrate a prototype of the Nightshade package and to satisfy this Level 2 milestone. This report is documentation that Red Sage Level 2 milestone requirements were successfully met.

  11. Using Competencies to Assess Entry-Level Knowledge of Students Graduating from Parks and Recreation Academic Programs

    Science.gov (United States)

    Hurd, Amy R.; Elkins, Daniel J.; Beggs, Brent A.

    2014-01-01

    To address the Council on Accreditation of Parks, Recreation, Tourism, and Related Professions accreditation standard 7.01.01, the Entry Level Competency Assessment was developed to measure 46 competencies in four categories needed by entry level professionals. Students rated their competence prior to beginning their senior internship. The results…

  12. Prototype of thermal degradation for radioactive wastes of low and intermediate level; Prototipo de degradacion termica para desechos radiactivos de nivel bajo e intermedio

    Energy Technology Data Exchange (ETDEWEB)

    Diaz A, L.V.; Pacheco S, J.O.; Pacheco P, M.; Monroy G, F.; Emeterio H, M. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: lauradiazarch@yahoo.com.mx

    2005-07-01

    At the present time, the scientific, academic, industrial and technological activities, generate great quantity of radioactive wastes of low and intermediate level (DRNBI). For to assure an appropriate final disposal of these, it is intended their treatment and vitrification by means of thermal plasma. This alternative offers multiple advantages in an only process: elevated energy density (105W/cm{sup 3}), high enthalpy (1400 kJ/mol), elevated chemical reactivity, quick quenching (106K/s) and operation temperatures of 4000 to 15000K; this allows the treatment of a great diversity of waste. Those reactors are compact and they work to atmospheric pressure and reduced thermal inertia. This technology allows to degrade DRNBI and to contain them in a vitreous matrix by means of a system made up of a reactor, canyon of plasma, of monitoring, of washing of gases and of control. Besides the design and general characteristics of the Prototype of Thermal Degradation of DRNBI, they are reported in this work the advances achieved in the selection of the ceramic material for the vitrification. Their characterization was carried out by means of SEM and XRD. With the preliminary results it can discern that the material but appropriate to be used as vitreous matrix is a ceramic clay. With the development of the proposed technology and the material for the vitreous matrix, it will be to treat DRNBI. (Author)

  13. Findings on Student Use of Social Media at the Collegiate, Undergraduate, and Graduate Levels: Implications for Post-Secondary Educators

    Science.gov (United States)

    Nagel, Tyler W. S.; Remillard, Chaseten; Aucoin, Robert; Takenishi, Akari

    2018-01-01

    In this paper, we present findings on social media use by students at two institutions in three levels of postsecondary programs. We find that students are almost universally using at least one social network, with Facebook as the most popular, and Instagram second. Many respondents are simultaneously active on several social networks. However,…

  14. How Do We Train Our Future Faculty to Teach? A Multidisciplinary Comparison of Graduate-Level Pedagogy Courses Offered at A Large Midwestern University

    Science.gov (United States)

    O'Loughlin, Valerie Dean; Kearns, Katherine; Sherwood-Laughlin, Catherine; Robinson, Jennifer Meta

    2017-01-01

    This study examines and documents graduate pedagogy courses offered at a large Midwestern research university. Thirty-three graduate pedagogy course instructors from 32 departments (a majority of those offering courses) completed an online survey. We report on enrollment demographics, preparation of faculty to teach such a course, and how a…

  15. MITRE sensor layer prototype

    Science.gov (United States)

    Duff, Francis; McGarry, Donald; Zasada, David; Foote, Scott

    2009-05-01

    The MITRE Sensor Layer Prototype is an initial design effort to enable every sensor to help create new capabilities through collaborative data sharing. By making both upstream (raw) and downstream (processed) sensor data visible, users can access the specific level, type, and quantities of data needed to create new data products that were never anticipated by the original designers of the individual sensors. The major characteristic that sets sensor data services apart from typical enterprise services is the volume (on the order of multiple terabytes) of raw data that can be generated by most sensors. Traditional tightly coupled processing approaches extract pre-determined information from the incoming raw sensor data, format it, and send it to predetermined users. The community is rapidly reaching the conclusion that tightly coupled sensor processing loses too much potentially critical information.1 Hence upstream (raw and partially processed) data must be extracted, rapidly archived, and advertised to the enterprise for unanticipated uses. The authors believe layered sensing net-centric integration can be achieved through a standardize-encapsulate-syndicateaggregate- manipulate-process paradigm. The Sensor Layer Prototype's technical approach focuses on implementing this proof of concept framework to make sensor data visible, accessible and useful to the enterprise. To achieve this, a "raw" data tap between physical transducers associated with sensor arrays and the embedded sensor signal processing hardware and software has been exploited. Second, we encapsulate and expose both raw and partially processed data to the enterprise within the context of a service-oriented architecture. Third, we advertise the presence of multiple types, and multiple layers of data through geographic-enabled Really Simple Syndication (GeoRSS) services. These GeoRSS feeds are aggregated, manipulated, and filtered by a feed aggregator. After filtering these feeds to bring just the type

  16. Linking Work Integrated Learning and Competency of Graduates Pursuing Graduate Diploma in Teaching Profession

    Science.gov (United States)

    Puncreobutr, Vichian; Malee; Somjate

    2016-01-01

    The objective of this research was to study the level of work integrated learning (WIL), and the competency of the teaching profession based on the standards of knowledge of the graduates at St. Theresa International College. The study group consisted of 115 graduates pursuing Graduate Diploma in Teaching Profession Program. The questionnaire was…

  17. DataCollection Prototyping

    CERN Multimedia

    Beck, H.P.

    DataCollection is a subsystem of the Trigger, DAQ & DCS project responsible for the movement of event data from the ROS to the High Level Triggers. This includes data from Regions of Interest (RoIs) for Level 2, building complete events for the Event Filter and finally transferring accepted events to Mass Storage. It also handles passing the LVL1 RoI pointers and the allocation of Level 2 processors and load balancing of Event Building. During the last 18 months DataCollection has developed a common architecture for the hardware and software required. This involved a radical redesign integrating ideas from separate parts of earlier TDAQ work. An important milestone for this work, now achieved, has been to demonstrate this subsystem in the so-called Phase 2A Integrated Prototype. This prototype comprises the various TDAQ hardware and software components (ROSs, LVL2, etc.) under the control of the TDAQ Online software. The basic functionality has been demonstrated on small testbeds (~8-10 processing nodes)...

  18. Rethink! prototyping transdisciplinary concepts of prototyping

    CERN Document Server

    Nagy, Emilia; Stark, Rainer

    2016-01-01

    In this book, the authors describe the findings derived from interaction and cooperation between scientific actors employing diverse practices. They reflect on distinct prototyping concepts and examine the transformation of development culture in their fusion to hybrid approaches and solutions. The products of tomorrow are going to be multifunctional, interactive systems – and already are to some degree today. Collaboration across multiple disciplines is the only way to grasp their complexity in design concepts. This underscores the importance of reconsidering the prototyping process for the development of these systems, particularly in transdisciplinary research teams. “Rethinking Prototyping – new hybrid concepts for prototyping” was a transdisciplinary project that took up this challenge. The aim of this programmatic rethinking was to come up with a general concept of prototyping by combining innovative prototyping concepts, which had been researched and developed in three sub-projects: “Hybrid P...

  19. Architectures of prototypes and architectural prototyping

    DEFF Research Database (Denmark)

    Hansen, Klaus Marius; Christensen, Michael; Sandvad, Elmer

    1998-01-01

    together as a team, but developed a prototype that more than fulfilled the expectations of the shipping company. The prototype should: - complete the first major phase within 10 weeks, - be highly vertical illustrating future work practice, - continuously live up to new requirements from prototyping......This paper reports from experience obtained through development of a prototype of a global customer service system in a project involving a large shipping company and a university research group. The research group had no previous knowledge of the complex business of shipping and had never worked...... sessions with users, - evolve over a long period of time to contain more functionality - allow for 6-7 developers working intensively in parallel. Explicit focus on the software architecture and letting the architecture evolve with the prototype played a major role in resolving these conflicting...

  20. Validating the Need to Include the Economic Returns of Graduates as a Metric of a Higher Education Institutions Level of Sustainability

    NARCIS (Netherlands)

    Maragakis, A.; van den Dobbelsteen, A.A.J.F.; Maragakis, Alexandros

    2016-01-01

    Higher education institutions play an important role in sustainability, in their own management and operation, in research and education, and in the undergraduate and graduate degrees they deliver. Often ignored, economic sustainability and future perspectives of students are important indicators

  1. Mobile Prototyping Platforms for Remote Engineering Applications

    Directory of Open Access Journals (Sweden)

    Karsten Henke

    2009-08-01

    Full Text Available This paper describes a low-cost mobile communication platform as a universal rapid-prototyping system, which is based on the Quadrocopter concept. At the Integrated Hardware and Software Systems Group at the Ilmenau University of Technology these mobile platforms are used to motivate bachelor and master students to study Computer Engineering sciences. This could be done by increasing their interest in technical issues, using this platform as integral part of a new ad-hoc lab to demonstrate different aspects in the area of Mobile Communication as well as universal rapid prototyping nodes to investigate different mechanisms for self-organized mobile communication systems within the International Graduate School on Mobile Communications. Beside the three fields of application, the paper describes the current architecture concept of the mobile prototyping platform as well as the chosen control mechanism and the assigned sensor systems to fulfill all the required tasks.

  2. Teaching, leadership, scholarly productivity, and level of activity in the chiropractic profession: a study of graduates of the Los Angeles College of Chiropractic radiology residency program.

    Science.gov (United States)

    Young, Kenneth J; Siordia, Lawrence

    2012-12-01

    The purpose of this study was to track the graduates of the Los Angeles College of Chiropractic (LACC) radiology residency program, review their scholarly productivity, and report those involved in teaching and leadership positions. Former LACC residents' career information was identified through publicly available electronic documents including Web sites and social media. PubMed and the Index to Chiropractic Literature databases were searched for chiropractic graduate job surveys, and proportional comparisons were made between the career paths of LACC radiology residency graduates and those of non-residency-trained chiropractors. Of 47 former LACC residents, 28 (60%) have or previously had careers in tertiary (chiropractic) education; and 12 (26%) have attained a department chair position or higher at tertiary teaching institutions. Twenty-two (47%) have or previously had private radiology practices, whereas 11 (23%) have or previously had clinical chiropractic practices. Often, residency graduates hold or have held 2 of these positions at once; and one, all 3. Chapters or books were authored by 13 (28%). Radiology residency LACC graduates are professionally active, particularly in education, and demonstrate scholarly productivity.

  3. Graduate School and You: A Guide for Prospective Graduate Students.

    Science.gov (United States)

    Kidwell, Clara Sue; LaPidus, Jules B.

    This pamphlet guides the college graduate in determining whether graduate school is an appropriate choice in career planning. Chapter titles include: "Why Graduate School?,""What is Graduate Education?,""Preparation for Graduate School,""Career Options with a Graduate Degree,""Making the Decision,""Financing a Graduate Education,""Choosing a…

  4. Predictability of prototype flash flood events in the Western Mediterranean under uncertainties of the precursor upper-level disturbance: the HYDROPTIMET case studies

    Directory of Open Access Journals (Sweden)

    R. Romero

    2005-01-01

    Full Text Available The HYDROPTIMET case studies (9–10 June 2000 Catalogne, 8–9 September 2002 Cévennes and 24–26 November 2002 Piémont appear to encompass a sort of prototype flash-flood situations in the western Mediterranean attending to the relevant synoptic and mesoscale signatures identified on the meteorological charts. In Catalogne, the convective event was driven by a low-pressure system of relatively small dimensions developed over the mediterranean coast of Spain that moved into southern France. For Cévennes, the main circulation pattern was a synoptic-scale Atlantic low which induced a persistent southerly low-level jet (LLJ over the western Mediterranean, strengthened by the Alps along its western flank, which guaranteed continuous moisture supply towards southern France where the long-lived, quasistationary convective system developed. The long Piémont episode, very representative of the most severe alpine flash flood events, shares some similarities with the Cévennes situation during its first stage in that it was controlled by a southerly moist LLJ associated with a large-scale disturbance located to the west. However, these circulation features were transient aspects and during the second half of the episode the situation was dominated by a cyclogenesis process over the Mediterranean which gave place to a mesoscale-size depression at surface that acted to force new heavy rain over the slopes of the Alps and maritime areas. That is, the Piémont episode can be catalogued as of mixed type with regard to the responsible surface disturbance, evolving from a large-scale pattern with remote action (like Cévennes to a mesoscale pattern with local action (like Catalogne. A prominent mid-tropospheric trough or cut-off low can be identified in all events prior and during the period of heavy rain, which clearly served as the precursor agent for the onset of the flash-flood conditions and the cyclogenesis at low-levels. Being aware of the

  5. Prototypical Rod Consolidation Demonstration Project

    International Nuclear Information System (INIS)

    1993-05-01

    The objective of Phase III of the Prototypical Rod Consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod Consolidation System as described in the NUS Phase II Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase III effort the system was tested on a component, subsystem, and system level. Volume IV provides the Operating and Maintenance Manual for the Prototypical Rod Consolidation System that was installed at the Cold Test Facility. This document, Book 1 of Volume IV, discusses: Process overview functional descriptions; Control system descriptions; Support system descriptions; Maintenance system descriptions; and Process equipment descriptions

  6. Prototypical Rod Consolidation Demonstration Project

    International Nuclear Information System (INIS)

    1993-05-01

    The objective of Phase III of the Prototypical Rod Consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod Consolidation System as described in the NUS Phase II Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase III effort the system was tested on a component, subsystem, and system level. Volume IV provides the Operating and Maintenance Manual for the Prototypical Rod Consolidation System that was installed at the Cold Test Facility. This document, Book 4 of Volume IV, discusses: Off-normal operating and recovery procedures; Emergency response procedures; Troubleshooting procedures; and Preventive maintenance procedures

  7. Validating the Need to Include the Economic Returns of Graduates as a Metric of a Higher Education Institutions Level of Sustainability

    Science.gov (United States)

    Maragakis, Antonios; van den Dobbelsteen, Andy; Maragakis, Alexandros

    2016-01-01

    Higher education institutions play an important role in sustainability, in their own management and operation, in research and education, and in the undergraduate and graduate degrees they deliver. Often ignored, economic sustainability and future perspectives of students are important indicators too. The research presented in this paper validates…

  8. German 450: Introduction to Business Operations in Germany. Initiating the Integration Process into the International Business Environment for German Majors at the Undergraduate and Graduate Levels.

    Science.gov (United States)

    Becker, Claudia A.

    The redesign of a course on German business, taught at the University of Illinois at Chicago, is described. The course, intended for both undergraduate and graduate German majors, initially described and defined German institutions and common business practices and explored differences in historical and cultural backgrounds. Course revision…

  9. Teaching an Interdisciplinary Graduate-Level Methods Course in an Openly-Networked Connected Learning Environment: A Glass Half-Full

    Science.gov (United States)

    Secret, Mary; Bryant, Nita L.; Cummings, Cory R.

    2017-01-01

    Our paper describes the design and delivery of an online interdisciplinary social science research methods course (ISRM) for graduate students in sociology, education, social work, and public administration. Collaborative activities and learning took place in two types of computer-mediated learning environments: a closed Blackboard course…

  10. Preparing for Graduate-Level Training in Professional Psychology: Comparisons across Clinical PhD, Counseling PhD, and Clinical PsyD Programs

    Science.gov (United States)

    Karazsia, Bryan T.; Smith, Lena

    2016-01-01

    In the present study, faculty who teach in clinical and counseling doctor of philosophy (PhD) or doctor of psychology (PsyD) programs completed surveys regarding preferences for prospective student preparations to graduate programs. Faculty expectations of minimum and ideal undergraduate training were highest for scientific methods, though…

  11. Imagining the prototype

    OpenAIRE

    Brouwer, C. E.; Bhomer, ten, M.; Melkas, H.; Buur, J.

    2013-01-01

    This article reports on the analysis of a design session, employing conversation analysis. In the design session three experts and a designer discuss a prototype of a shirt, which has been developed with the input from these experts. The analysis focuses on the type of involvement of the participants with the prototype and how they explicate the points they make in the discussion with or without making use of the prototype. Three techniques for explicating design issues that exploit the proto...

  12. Rapid Prototyping Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The ARDEC Rapid Prototyping (RP) Laboratory was established in December 1992 to provide low cost RP capabilities to the ARDEC engineering community. The Stratasys,...

  13. Fabrication and Prototyping Lab

    Data.gov (United States)

    Federal Laboratory Consortium — Purpose: The Fabrication and Prototyping Lab for composite structures provides a wide variety of fabrication capabilities critical to enabling hands-on research and...

  14. A Graduate Professional Program in Translation.

    Science.gov (United States)

    Waldinger, Renee

    1987-01-01

    The City University of New York Graduate School's professional program in translation combines high-level, specialized language learning in French, German, and Spanish with related graduate work in such disciplines as international affairs, finance, banking, jurisprudence, literature, and computer science. (CB)

  15. Business Graduate Skill Sets - Summary Report

    Science.gov (United States)

    Jackson, Denise; Chapman, Elaine

    2009-01-01

    The purpose of this study was to evaluate the competencies required by industry in business graduates and the relative importance and current graduate proficiency levels in each skill area. A secondary purpose was to examine and compare the perceived role of contemporary business schools across different samples. The study was conducted during…

  16. Emotional Problems of Graduate Education

    Science.gov (United States)

    Loewenberg, Peter

    1969-01-01

    Describes the domination-submission relationship between professors and students at the graduate level. Stresses the prevalence of transferences, which are "exacerbated by reality factors which infantilize the student and magnify the omnipotence of the teachers. This dependence is not conductive to creativity, maturity, and intellectual…

  17. USO-Built Graduate School

    NARCIS (Netherlands)

    Bronswijk, van J.E.M.H.; Doevendans, C.H.; Verbeke, J.

    2003-01-01

    USO-Built is a distributed Graduate Research School under the CLUSTER (www.cluster.org) umbrella with its own aim, high-quality research and educational programs. It focuses on teaching research at the PhD and MPhil-level, concerns the technological domains of science aiming at balanced and implicit

  18. High School Graduation Rates:Alternative Methods and Implications

    Directory of Open Access Journals (Sweden)

    Jing Miao

    2004-10-01

    Full Text Available The No Child Left Behind Act has brought great attention to the high school graduation rate as one of the mandatory accountability measures for public school systems. However, there is no consensus on how to calculate the high school graduation rate given the lack of longitudinal databases that track individual students. This study reviews literature on and practices in reporting high school graduation rates, compares graduation rate estimates yielded from alternative methods, and estimates discrepancies between alternative results at national, state, and state ethnic group levels. Despite the graduation rate method used, results indicate that high school graduation rates in the U.S. have been declining in recent years and that graduation rates for black and Hispanic students lag substantially behind those of white students. As to graduation rate method preferred, this study found no evidence that the conceptually more complex methods yield more accurate or valid graduation rate estimates than the simpler methods.

  19. Designing and testing prototypes

    NARCIS (Netherlands)

    Vereijken, P.; Wijnands, F.; Stol, W.

    1995-01-01

    This second progress report focuses on designing a theoretical prototype by linking parameters to methods and designing the methods in this context until they are ready for initial testing. The report focuses also on testing and improving the prototype in general and the methods in particular until

  20. EUCLID ARCHIVE SYSTEM PROTOTYPE

    NARCIS (Netherlands)

    Belikov, Andrey; Williams, Owen; Droge, Bob; Tsyganov, Andrey; Boxhoorn, Danny; McFarland, John; Verdoes Kleijn, Gijs; Valentijn, E; Altieri, Bruno; Dabin, Christophe; Pasian, F.; Osuna, Pedro; Soille, P.; Marchetti, P.G.

    2014-01-01

    The Euclid Archive System prototype is a functional information system which is used to address the numerous challenges in the development of fully functional data processing system for Euclid. The prototype must support the highly distributed nature of the Euclid Science Ground System, with Science

  1. Specifications in software prototyping

    OpenAIRE

    Luqi; Chang, Carl K.; Zhu, Hong

    1998-01-01

    We explore the use of software speci®cations for software prototyping. This paper describes a process model for software prototyping, and shows how specifications can be used to support such a process via a cellular mobile phone switch example.

  2. EPCiR prototype

    DEFF Research Database (Denmark)

    2003-01-01

    A prototype of a residential pervasive computing platform based on OSGi involving among other a mock-up of an health care bandage.......A prototype of a residential pervasive computing platform based on OSGi involving among other a mock-up of an health care bandage....

  3. Cooperative Prototyping Experiments

    DEFF Research Database (Denmark)

    Bødker, Susanne; Grønbæk, Kaj

    1989-01-01

    This paper describes experiments with a design technique that we denote cooperative prototyping. The experiments consider design of a patient case record system for municipal dental clinics in which we used HyperCard, an off the shelf programming environment for the Macintosh. In the ecperiments we...... tried to achieve a fluent work-like evaluation of prototypes where users envisioned future work with a computer tool, at the same time as we made on-line modifications of prototypes in cooperation with the users when breakdown occur in their work-like evaluation. The experiments showed...... that it was possible to make a number of direct manipulation changes of prototypes in cooperation with the users, in interplay with their fluent work-like evaluation of these. However, breakdown occurred in the prototyping process when we reached the limits of the direct manipulation support for modification. From...

  4. System design document for the INFLO prototype.

    Science.gov (United States)

    2014-03-01

    This report documents the high level System Design Document (SDD) for the prototype development and : demonstration of the Intelligent Network Flow Optimization (INFLO) application bundle, with a focus on the Speed : Harmonization (SPD-HARM) and Queu...

  5. Graduates Performance in the Workplace: Employers‟ Perspective

    Directory of Open Access Journals (Sweden)

    Ariel M. Plantilla

    2017-05-01

    Full Text Available This paper is an assessment of the employers feedback on the performance of business graduates of University of Rizal System Pililla from batch 2010 – 2014 in the workplace with respect to knowledge and understanding, skills and personal qualities. The researcher used descriptive method of research utilizing the employers and managers of employed graduates as key informants of the study. The findings revealed that employers were very much satisfied on the performance of graduates in terms of knowledge and understanding of the job, general skills, specialized skills and personal qualities demonstrated in the workplace. There was significant difference on the performance of graduates in terms of positions and length of service as revealed by the variations on the level of satisfaction of the employers on graduates’ performance in work. Relationship exists between the degree of importance of the four aspects of job performance and the level of satisfaction on the performance of business graduates. Employers placed a strong preference to the business graduates of the campus. There is no mismatch of knowledge and skills of graduates and what the employers are expecting among the business graduates.

  6. Graduates', University Lecturers' and Employers' Perceptions towards Employability Skills

    Science.gov (United States)

    Wickramasinghe, Vathsala; Perera, Lasantha

    2010-01-01

    Purpose: The purpose of this study is to explore employability skills that employers, university lecturers and graduates value to bring to the workplace, when graduates are applying for entry-level graduate jobs in the field of computer science in Sri Lanka. Design/methodology/approach: A total of three samples were selected for this exploratory…

  7. Towards Graduateness: Exploring Academic Intellectual Development in University Master's Students

    Science.gov (United States)

    Steur, Jessica; Jansen, Ellen; Hofman, Adriaan

    2016-01-01

    Our research aims to contribute to the body of knowledge on graduateness by proposing a model that explicates the expected level performance of graduates. In this study, the model is elaborated for 3 graduateness domains: reflective thinking, scholarship, and moral citizenship. We used data on students' perceived abilities in these domains that…

  8. STEm Minority Graduate Program

    Energy Technology Data Exchange (ETDEWEB)

    Nicholas, Kaen E

    2012-09-20

    ABSTRACT The state of science, technology, engineering and math (STEM) education in the United States has seen some unfavorable assessments over the past decade. In early February, 2010 the House of Representatives heard testimony on undergraduate and graduate education. The message from the panel, which included experts from academia, STEM-based industries, and the National Science Foundation (NSF) was dire and required an urgent response. The experts along with the committee's chairperson, U. S. Representative Daniel Lipinski (D-IL) cited that the complexity of Science, Technology, Engineering, and Mathematics applications and coursework and the methodology utilized to teach these subjects are forcing students out of these disciplines. As the National Academies described in its 2007 report Rising Above the Gathering Storm, successful STEM education is not just an academic pursuit it's a necessity for competing in the knowledge-based economy that the United States had a key role in creating. The potential for action is being made available again as the America COMPETES Act of 2007 is up for reauthorization. Its initial focus was on STEM education at the K-12 levels, but efforts at the undergraduate and graduate levels are needed to retain students to fill the jobs left vacant as baby boomers retire. The Educational Advancement Alliance, Inc. (EAA) has for two decades created programs that have not only addressed the issues of ensuring that students are aptly prepared for college but have focused its efforts over the past decade on increasing the number of students who pursue degrees in STEM disciplines. For the EAA, the introduction of the wonders of science begins at the elementary and middle school level via the Learning Lab, a state-of-the-art mobile science laboratory that visits students in grades 4-6 at the various schools throughout Philadelphia and The Math/Tech Academy which meets on Saturdays for students in grades 5-7. For the past two years

  9. EVALUATION OF UNIVERSITY GRADUATE COMPETENCES

    Directory of Open Access Journals (Sweden)

    Mikhail B. Gitman

    2014-01-01

    Full Text Available The quality evaluation problem in training of students at competence-based approach is considered in the article. The technique of creation of a negentropic assessment of level of the competences formation of graduates students is offered. The article deals with the special learning curves, which provide the opportunity to be more precise in defi ning the dependence of the level of the students' competence formation of the on their scoring. 

  10. The Prototype Plume Busters Software: A New Tool for Exploring Issues Related to Environmental Policy in Undergraduate-level Earth and Environmental Science Courses

    Science.gov (United States)

    Macfarlane, P. A.

    2006-12-01

    Students seldom have an opportunity to explore the issues related to the environmental impact of contamination on water resources. With NSF support we have developed the prototype Plume Busters, in which students take on the role of an environmental consultant. The software consists of an interactive, Java application and accompanying HTML linked pages. Following a pipeline spill, the environmental consultant is hired by the pipeline owner to locate the resulting plume created by the spill and remediate the contaminated aquifer at minimum monetary and time cost. The contamination must be removed from the aquifer before it reaches the river and eventually a downstream public water supply. The application simulates movement of a plume from a pipeline break through a shallow alluvial aquifer towards the river upstream from a municipal water supply intake. To locate the plume, the student places observation wells on a gridded map of the study area and the simulation returns the contaminant concentrations at those locations on the appropriate sample dates. Once the plume is located, the student is able to site pumping and injection wells on the map for aquifer remediation using a simple pump-and-treat technique. The simulation then computes the movement of particles to the pumping wells and returns the cumulative mass removed by the production remediation well. Plume Busters also provides teachers with a means to initiate student exploration of a wide range of environmental issues, including (1) source-water assessment and ground-water and wellhead protection zones, (2) the impact of human activities and technology on the hydrosphere and the biosphere, (3) the role of technology in the resolution of environmental issues (4) legal, social, political, and economic implications of environmental issues, and (5) risk assessment resulting from human activities.

  11. Prototypical Rod Consolidation Demonstration Project

    International Nuclear Information System (INIS)

    1993-05-01

    The objective of Phase 3 of the Prototypical Rod consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod consolidation System as described in the NUS Phase 2 Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase 3 effort the system was tested on a component, subsystem, and system level. This volume 1, discusses the PRCDP Phase 3 Test Program that was conducted by the HALLIBURTON NUS Environmental Corporation under contract AC07-86ID12651 with the United States Department of Energy. This document, Volume 1, Book 2 discusses the following topics: Fuel Rod Extraction System Test Results and Analysis Reports and Clamping Table Test Results and Analysis Reports

  12. Prototypical Rod Consolidation Demonstration Project

    International Nuclear Information System (INIS)

    1993-05-01

    The objective of Phase 3 of the Prototypical Rod consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod consolidation System as described in the NUS Phase 2 Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase 3 effort the system was tested on a component, subsystem, and system level. This volume 1, discusses the PRCDP Phase 3 Test Program that was conducted by the HALLIBURTON NUS Environmental Corporation under contract AC07-86ID12651 with the United States Department of Energy. This document, Volume 1, Book 1 discusses the following topics: the background of the project; test program description; summary of tests and test results; problem evaluation; functional requirements confirmation; recommendations; and completed test documentation for tests performed in Phase 3

  13. Prototypical Rod Consolidation Demonstration Project

    International Nuclear Information System (INIS)

    1993-05-01

    The objective of Phase 3 of the Prototypical Rod consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod consolidation System as described in the NUS Phase 2 Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase 3 effort the system was tested on a component, subsystem, and system level. This volume 1, discusses the PRCDP Phase 3 Test Program that was conducted by the HALLIBURTON NUS Environmental Corporation under contract AC07-86ID12651 with the United States Department of Energy. This document, Volume 1, Book 9 discusses the following topics: Integrated System Normal Operations Test Results and Analysis Report; Integrated System Off-Normal Operations Test Results and Analysis Report; and Integrated System Maintenance Operations Test Results and Analysis Report

  14. Prototypical Rod Consolidation Demonstration Project

    International Nuclear Information System (INIS)

    1993-05-01

    The objective of Phase 3 of the Prototypical Rod consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod consolidation System as described in the NUS Phase 2 Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase 3 effort the system was tested on a component, subsystem, and system level. This volume 1, discusses the PRCDP Phase 3 Test Program that was conducted by the HALLIBURTON NUS Environmental Corporation under contract AC07-86ID12651 with the United States Department of Energy. This document, Volume 1, Book 8 discusses Control System SOT Tests Results and Analysis Report. This is a continuation of Book 7

  15. Prototypical Rod Construction Demonstration Project

    International Nuclear Information System (INIS)

    1993-05-01

    The objective of Phase 3 of the Prototypical Rod consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod consolidation System as described in the NUS Phase 2 Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase 3 effort the system was tested on a component, subsystem, and system level. This volume 1, discusses the PRCDP Phase 3 Test Program that was conducted by the HALLIBURTON NUS Environmental Corporation under contract AC07-86ID12651 with the United States Department of Energy. This document, Volume 1, Book 3 discusses the following topics: Downender Test Results and Analysis Report; NFBC Canister Upender Test Results and Analysis Report; Fuel Assembly Handling Fixture Test Results and Analysis Report; and Fuel Canister Upender Test Results and Analysis Report

  16. Speaking in Tongues: Can International Graduate Students Read International Graduate Admissions Materials?

    Science.gov (United States)

    Taylor, Zachary W.

    2017-01-01

    A recent Educational Testing Services report (2016) found that international graduate students with a TOEFL score of 80--the minimum average TOEFL score for graduate admission in the United States--usually possess reading subscores of 20, equating to a 12th-grade reading comprehension level. However, one public flagship university's international…

  17. From prototype to product

    DEFF Research Database (Denmark)

    Andersen, Tariq Osman; Bansler, Jørgen P.; Kensing, Finn

    2017-01-01

    This paper delves into the challenges of engaging patients, clinicians and industry stakeholders in the participatory design of an mHealth platform for patient-clinician collaboration. It follows the process from the development of a research prototype to a commercial software product. In particu......This paper delves into the challenges of engaging patients, clinicians and industry stakeholders in the participatory design of an mHealth platform for patient-clinician collaboration. It follows the process from the development of a research prototype to a commercial software product....... In particular, we draw attention to four major challenges of (a) aligning the different concerns of patients and clinicians, (b) designing according to clinical accountability, (c) ensuring commercial interest, and (d) dealing with regulatory constraints when prototyping safety critical health Information...... Technology. Using four illustrative cases, we discuss what these challenges entail and the implications they pose to Participatory Design. We conclude the paper by presenting lessons learned....

  18. Yucca Mountain project prototype testing

    International Nuclear Information System (INIS)

    Hughes, W.T.; Girdley, W.A.

    1990-01-01

    The U.S. DOE is responsible for characterizing the Yucca Mountain site in Nevada to determine its suitability for development as a geologic repository to isolate high-level nuclear waste for at least 10,000 years. This unprecedented task relies in part on measurements made with relatively new methods or applications, such as dry coring and overcoring for studies to be conducted from the land surface and in an underground facility. The Yucca Mountain Project has, since 1988, implemented a program of equipment development and methods development for a broad spectrum of hydrologic, geologic, rock mechanics, and thermomechanical tests planned for use in an Exploratory Shaft during site characterization at the Yucca Mountain site. A second major program was fielded beginning in April 1989 to develop and test methods and equipment for surface drilling to obtain core samples from depth using only air as a circulating medium. The third major area of prototype testing has been during the ongoing development of the Instrumentation/ Data Acquisition System (IDAS), designed to collect and monitor data from down-hole instrumentation in the unsaturated zone, and store and transmit the data to a central archiving computer. Future prototype work is planned for several programs including the application of vertical seismic profiling methods and flume design to characterizing the geology at Yucca Mountain. The major objectives of this prototype testing are to assure that planned Site Characterization testing can be carried out effectively at Yucca Mountain, both in the Exploratory Shaft Facility (ESF), and from the surface, and to avoid potential major failures or delays that could result from the need to re-design testing concepts or equipment. This paper will describe the scope of the Yucca Mountain Project prototype testing programs and summarize results to date. 3 figs

  19. PANDA Muon System Prototype

    Science.gov (United States)

    Abazov, Victor; Alexeev, Gennady; Alexeev, Maxim; Frolov, Vladimir; Golovanov, Georgy; Kutuzov, Sergey; Piskun, Alexei; Samartsev, Alexander; Tokmenin, Valeri; Verkheev, Alexander; Vertogradov, Leonid; Zhuravlev, Nikolai

    2018-04-01

    The PANDA Experiment will be one of the key experiments at the Facility for Antiproton and Ion Research (FAIR) which is under construction now in the territory of the GSI Helmholtz Centre for Heavy Ion Research in Darmstadt, Germany. PANDA is aimed to study hadron spectroscopy and various topics of the weak and strong forces. Muon System is chosen as the most suitable technology for detecting the muons. The Prototype of the PANDA Muon System is installed on the test beam line T9 at the Proton Synchrotron (PS) at CERN. Status of the PANDA Muon System prototype is presented with few preliminary results.

  20. Prototyping a Smart City

    DEFF Research Database (Denmark)

    Korsgaard, Henrik; Brynskov, Martin

    In this paper, we argue that by approaching the so-called Smart City as a design challenge, and an interaction design perspective, it is possible to both uncover existing challenges in the interplay between people, technology and society, as well as prototype possible futures. We present a case...... in which we exposed data about the online communication between the citizens and the municipality on a highly visible media facade, while at the same time prototyped a tool that enabled citizens to report ‘bugs’ within the city....

  1. PANDA Muon System Prototype

    Directory of Open Access Journals (Sweden)

    Abazov Victor

    2018-01-01

    Full Text Available The PANDA Experiment will be one of the key experiments at the Facility for Antiproton and Ion Research (FAIR which is under construction now in the territory of the GSI Helmholtz Centre for Heavy Ion Research in Darmstadt, Germany. PANDA is aimed to study hadron spectroscopy and various topics of the weak and strong forces. Muon System is chosen as the most suitable technology for detecting the muons. The Prototype of the PANDA Muon System is installed on the test beam line T9 at the Proton Synchrotron (PS at CERN. Status of the PANDA Muon System prototype is presented with few preliminary results.

  2. LEP vacuum chamber, prototype

    CERN Multimedia

    CERN PhotoLab

    1983-01-01

    Final prototype for the LEP vacuum chamber, see 8305170 for more details. Here we see the strips of the NEG pump, providing "distributed pumping". The strips are made from a Zr-Ti-Fe alloy. By passing an electrical current, they were heated to 700 deg C.

  3. Imagining the prototype

    NARCIS (Netherlands)

    Brouwer, C. E.; Bhomer, ten M.; Melkas, H.; Buur, J.

    2013-01-01

    This article reports on the analysis of a design session, employing conversation analysis. In the design session three experts and a designer discuss a prototype of a shirt, which has been developed with the input from these experts. The analysis focuses on the type of involvement of the

  4. The prototype fast reactor

    International Nuclear Information System (INIS)

    Broomfield, A.M.

    1985-01-01

    The paper concerns the Prototype Fast Reactor (PFR), which is a liquid metal cooled fast reactor power station, situated at Dounreay, Scotland. The principal design features of a Fast Reactor and the PFR are given, along with key points of operating history, and health and safety features. The role of the PFR in the development programme for commercial reactors is discussed. (U.K.)

  5. AGS Booster prototype magnets

    Energy Technology Data Exchange (ETDEWEB)

    Danby, G.; Jackson, J.; Lee, Y.Y.; Phillips, R.; Brodowski, J.; Jablonski, E.; Keohane, G.; McDowell, B.; Rodger, E.

    1987-03-19

    Prototype magnets have been designed and constructed for two half cells of the AGS Booster. The lattice requires 2.4m long dipoles, each curved by 10/sup 0/. The multi-use Booster injector requires several very different standard magnet cycles, capable of instantaneous interchange using computer control from dc up to 10 Hz.

  6. AGS booster prototype magnets

    International Nuclear Information System (INIS)

    Danby, G.; Jackson, J.; Lee, Y.Y.; Phillips, R.; Brodowski, J.; Jablonski, E.; Keohane, G.; McDowell, B.; Rodger, E.

    1987-01-01

    Prototype magnets have been designed and constructed for two half cells of the AGS Booster. The lattice requires 2.4m long dipoles, each curved by 10 0 . The multi-use Booster injector requires several very different standard magnet cycles, capable of instantaneous interchange using computer control from dc up to 10 Hz

  7. Cockroft Walton accelerator prototype

    International Nuclear Information System (INIS)

    Hutapea, Sumihar.

    1976-01-01

    Prototype of a Cockroft Walton generator using ceramic and plastic capacitors is discussed. Compared to the previous generator, the construction and components are much more improved. Pralon is used for the high voltage insulation column and plastic is used as a dielectric material for the high voltage capacitor. Cockroft Walton generator is used as a high tension supply for an accelerator. (author)

  8. Prompt and Precise Prototyping

    Science.gov (United States)

    2003-01-01

    For Sanders Design International, Inc., of Wilton, New Hampshire, every passing second between the concept and realization of a product is essential to succeed in the rapid prototyping industry where amongst heavy competition, faster time-to-market means more business. To separate itself from its rivals, Sanders Design aligned with NASA's Marshall Space Flight Center to develop what it considers to be the most accurate rapid prototyping machine for fabrication of extremely precise tooling prototypes. The company's Rapid ToolMaker System has revolutionized production of high quality, small-to-medium sized prototype patterns and tooling molds with an exactness that surpasses that of computer numerically-controlled (CNC) machining devices. Created with funding and support from Marshall under a Small Business Innovation Research (SBIR) contract, the Rapid ToolMaker is a dual-use technology with applications in both commercial and military aerospace fields. The advanced technology provides cost savings in the design and manufacturing of automotive, electronic, and medical parts, as well as in other areas of consumer interest, such as jewelry and toys. For aerospace applications, the Rapid ToolMaker enables fabrication of high-quality turbine and compressor blades for jet engines on unmanned air vehicles, aircraft, and missiles.

  9. Surrogates-based prototyping

    NARCIS (Netherlands)

    Du Bois, E.; Horvath, I.

    2014-01-01

    The research is situated in the system development phase of interactive software products. In this detailed design phase, we found a need for fast testable prototyping to achieve qualitative change proposals on the system design. In this paper, we discuss a literature study on current software

  10. Z Andromedae: the prototype

    International Nuclear Information System (INIS)

    Viotti, R.; Giangrande, A.; Ricciardi, O.; Cassatella, A.

    1982-01-01

    Z And is considered as the ''prototype'' of the symbiotic stars. Besides its symbiotic spectrum, the star is also known for its characteristic light curve (and for the related spectral variations). Since many theoretical speculations on Z And and similar objects have been based on the luminosity and spectral variations of this star, the authors critically analyse the observational data concerning it. (Auth.)

  11. Prototype ATLAS straw tracker

    CERN Multimedia

    Laurent Guiraud

    1998-01-01

    This is an early prototype of the straw tracking device for the ATLAS detector at CERN. This detector will be part of the LHC project, scheduled to start operation in 2008. The straw tracker will consist of thousands of gas-filled straws, each containing a wire, allowing the tracks of particles to be followed.

  12. The Siemens graduate program

    International Nuclear Information System (INIS)

    Schaeffler, I.

    2000-01-01

    Siemens is an international company acting in different domains: power generation, communication and information, traffic, health, etc. To be more flexible and active in a world in constant evolution, the company proposes a graduate program where young people with a special background have the possibility to start an international career in all the domains of activity. This graduate program is especially important in the domain of nuclear energy, where the know-how transfer between the previous generation and the new one is a constant point of interest. This article presents the conditions to be accepted in this graduate program, and the supplementary training supporting this program. The Siemens graduate program (Sg) proposes a global concept with a main emphasis being international. (authors)

  13. Credentialism among Graduate Students.

    Science.gov (United States)

    Stodt, Martha McGinty; Thielens, Wagner, Jr.

    1985-01-01

    An exploratory study of students entering four elite fields found that most sought both credentials and competence. Stiff competition within chosen occupations led the majority of students to seek every advantage that graduate education could provide. (Author/MLW)

  14. Meet Your Graduates.

    Science.gov (United States)

    Kramer, Karen L.

    1989-01-01

    Presents five vocational graduates who have become successful entrepreneurs. Their businesses include an ice cream parlor, an investment service, a dog grooming business, microcomputer program manufacturing, and high-fashion clothing and cosmetics for problem skin. (JOW)

  15. Refrigerating liquid prototype for LED's thermal management

    International Nuclear Information System (INIS)

    Faranda, Roberto; Guzzetti, Stefania; Lazaroiu, George Cristian; Leva, Sonia

    2012-01-01

    The heat management is the critical factor for high performance operation of LED. A new heat management application of refrigerating liquid integrated within a fabricated prototype is proposed and investigated. A series of experiments considering different heights of liquid level were performed to evaluate the heat dissipation performance and optical characteristics of the refrigerating liquid based prototype. The results reveal that the junction temperature decreases as the level of refrigerating liquid increases. The experimental results report that the refrigerating liquid reduces the junction temperature, and can positively influence the luminous radiation performances. An optimization investigation of the proposed solution was carried out to find an optimum thermal performance. The experiments indicated that refrigerating liquid cooling is a powerful way for heat dissipation of high power LEDs, and the fabrication of prototype was feasible and useful. - Highlights: ► New heat management application of refrigerating liquid on a fabricated LED prototype. ► Thermal models setup and comparison between the classical and the new solutions. ► The impact of refrigerating liquid level on LED thermal and luminous performances. ► The relationship between different levels of liquid with LED prototype performances.

  16. Career development: graduate nurse views.

    Science.gov (United States)

    Cleary, Michelle; Horsfall, Jan; Muthulakshmi, Paulpandi; Happell, Brenda; Hunt, Glenn E

    2013-09-01

    To explore recent Singapore nursing graduates' experience of and views about their career development and progress. The recruitment and retention of an adequate number of registered nurses is a continuing workforce issue in Singapore and other major cities. Survey of recent nursing graduates. Recent nursing graduates from the Bachelor programme (n = 147) were sent an individual survey; a response rate of 54% was achieved. Findings show that nurses rated their self-concept in a positive manner and were most satisfied (moderately to very) with helping patients and providing effective care, and the level of patient involvement. They were least satisfied (moderately to only a little) with prestige among the general medical community and the general public, hours of work, lifestyle factors and research opportunities. The following four factors were identified as significant impediments to career development; lack of support in the work place; perceived insufficient clinical career development opportunities; excessive work hours; and limited access to merit-based places in further education. Suggestions made to overcome perceived career development barriers are as follows: broad multifactorial healthcare system changes; decreased and more flexible working hours; and fairer access to further clinical and higher education. Results highlight the value clinical nurses place on having access to career development opportunities, merit-based further education and work place supports. These factors also have the potential to influence patient care and impact on the retention of nurses in their present job and satisfaction with their nursing career. © 2013 Blackwell Publishing Ltd.

  17. Design exploration and verification platform, based on high-level modeling and FPGA prototyping, for fast and flexible digital communication in physics experiments

    International Nuclear Information System (INIS)

    Magazzù, G; Borgese, G; Costantino, N; Fanucci, L; Saponara, S; Incandela, J

    2013-01-01

    In many research fields as high energy physics (HEP), astrophysics, nuclear medicine or space engineering with harsh operating conditions, the use of fast and flexible digital communication protocols is becoming more and more important. The possibility to have a smart and tested top-down design flow for the design of a new protocol for control/readout of front-end electronics is very useful. To this aim, and to reduce development time, costs and risks, this paper describes an innovative design/verification flow applied as example case study to a new communication protocol called FF-LYNX. After the description of the main FF-LYNX features, the paper presents: the definition of a parametric SystemC-based Integrated Simulation Environment (ISE) for high-level protocol definition and validation; the set up of figure of merits to drive the design space exploration; the use of ISE for early analysis of the achievable performances when adopting the new communication protocol and its interfaces for a new (or upgraded) physics experiment; the design of VHDL IP cores for the TX and RX protocol interfaces; their implementation on a FPGA-based emulator for functional verification and finally the modification of the FPGA-based emulator for testing the ASIC chipset which implements the rad-tolerant protocol interfaces. For every step, significant results will be shown to underline the usefulness of this design and verification approach that can be applied to any new digital protocol development for smart detectors in physics experiments.

  18. Design exploration and verification platform, based on high-level modeling and FPGA prototyping, for fast and flexible digital communication in physics experiments

    Science.gov (United States)

    Magazzù, G.; Borgese, G.; Costantino, N.; Fanucci, L.; Incandela, J.; Saponara, S.

    2013-02-01

    In many research fields as high energy physics (HEP), astrophysics, nuclear medicine or space engineering with harsh operating conditions, the use of fast and flexible digital communication protocols is becoming more and more important. The possibility to have a smart and tested top-down design flow for the design of a new protocol for control/readout of front-end electronics is very useful. To this aim, and to reduce development time, costs and risks, this paper describes an innovative design/verification flow applied as example case study to a new communication protocol called FF-LYNX. After the description of the main FF-LYNX features, the paper presents: the definition of a parametric SystemC-based Integrated Simulation Environment (ISE) for high-level protocol definition and validation; the set up of figure of merits to drive the design space exploration; the use of ISE for early analysis of the achievable performances when adopting the new communication protocol and its interfaces for a new (or upgraded) physics experiment; the design of VHDL IP cores for the TX and RX protocol interfaces; their implementation on a FPGA-based emulator for functional verification and finally the modification of the FPGA-based emulator for testing the ASIC chipset which implements the rad-tolerant protocol interfaces. For every step, significant results will be shown to underline the usefulness of this design and verification approach that can be applied to any new digital protocol development for smart detectors in physics experiments.

  19. Database Replication Prototype

    OpenAIRE

    Vandewall, R.

    2000-01-01

    This report describes the design of a Replication Framework that facilitates the implementation and com-parison of database replication techniques. Furthermore, it discusses the implementation of a Database Replication Prototype and compares the performance measurements of two replication techniques based on the Atomic Broadcast communication primitive: pessimistic active replication and optimistic active replication. The main contributions of this report can be split into four parts....

  20. Brachial Plexus Blocker Prototype

    OpenAIRE

    Stéphanie Coelho Monteiro

    2017-01-01

    Although the area of surgical simulation has been the subject of study in recent years, it is still necessary to develop artificial experimental models with a perspective to dismiss the use of biological models. Since this makes the simulators more real, transferring the environment of the health professional to a physical or virtual reality, an anesthetic prototype has been developed, where the motor response is replicated when the brachial plexus is subjected to a proximal nervous stimulus....

  1. Prototyping real-time systems

    OpenAIRE

    Clynch, Gary

    1994-01-01

    The traditional software development paradigm, the waterfall life cycle model, is defective when used for developing real-time systems. This thesis puts forward an executable prototyping approach for the development of real-time systems. A prototyping system is proposed which uses ESML (Extended Systems Modelling Language) as a prototype specification language. The prototyping system advocates the translation of non-executable ESML specifications into executable LOOPN (Language of Object ...

  2. A prototype analysis of vengeance

    NARCIS (Netherlands)

    Elshout, Maartje; Nelissen, Rob; van Beest, Ilja

    2015-01-01

    The authors examined the concept of vengeance from a prototype perspective. In 6 studies, the prototype structure of vengeance was mapped. Sixty-nine features of vengeance were identified (Study 1), and rated on centrality (Study 2). Further studies confirmed the prototype structure. Compared to

  3. FY97 ICCS prototype specification

    International Nuclear Information System (INIS)

    Woodruff, J.

    1997-01-01

    The ICCS software team will implement and test two iterations of their software product during FY97. This document specifies the products to be delivered in that first prototype and projects the direction that the second prototype will take. Detailed specification of the later iteration will be written when the results of the first iteration are complete. The selection of frameworks to be implemented early is made on a basis of risk analysis from the point of view of future development in the ICCS project. The prototype will address risks in integration of object- oriented components, in refining our development process, and in emulation testing for FEP devices. This document is a specification that identifies products and processes to undertake for resolving these risks. The goals of this activity are to exercise our development process at a modest scale and to probe our architecture plan for fundamental limits and failure modes. The product of the iterations will be the framework software which will be useful in future ICCS code. Thus the FY97 products are intended for internal usage by the ICCS team and for demonstration to the FEP software developers of the strategy for integrating supervisory software with FEP computers. This will be the first of several expected iterations of the software development process and the performance measurements that ICCS will demonstrate, intended to support confidence in our ability to meet project RAM goals. The design of the application software is being carried out in a separate WBS 1.5.2 activity. The design activity has as its FY97 product a series of Software Design Documents that will specify the functionality of the controls software of ICCS. During the testing of this year''s prototypes, the application functionality needed for test will be provided by sample maintenance controls. These are early precursors of controls that can be used for low level device control. Since the devices under test will be represented by

  4. The Top 100: Graduate Degrees Conferred

    Science.gov (United States)

    Borden, Victor M. H.

    2011-01-01

    Recently, some critics and policymakers have started to question the value of a college education given the increasing costs of attending and the commensurate high debt levels of college graduates. Past and present studies also demonstrate that the average value masks important variation by degree level and field of study. This paper focuses on…

  5. Graduate Information Skills

    Directory of Open Access Journals (Sweden)

    Niall McSweeney

    2010-09-01

    Full Text Available It is one of six modules within the SIF (Strategic Innovative Fund funded Generic Skills Project for PHDS. The Generic Skills Project itself was just one strand within others Supporting the development of 4th level education in Ireland. The Graduate Information Skills module is a collaborative project led by NUI Galway with partners Trinity College Dublin and University College Cork. It is aimed at PHDS but Masters Research and post-docs will find the module of benefit too. The module is developed to offer both an online and face-to-face environment and be customizable with eLearning environments. Project launched in 2007 and has a three year cycle. We agreed to outsource online development and after a tendering process a company called eMedia were awarded the contract. We have piloted full content to PHDS in the three institutions involved and have reviewed feed-back received from attendees. We have also met with module presenters and authors to review their feed-back. The initial content while generic to all PHDS has Science Technology Medicine specific examples. We have complete Online content and module is being offered locally for face-to-face credited teaching. The module has in all units Learning Outcomes and is intended to be fully credited and evaluated for module completion. Funds allowing we would hope to develop Humanities specific content, add units such as on Writing Skills etc. We feel the module has created very good blended learning opportunities and is offered to students in a very contemporary design format. In an Irish context we feel the module offers a national resource that could be used by other institutions.

  6. Design of Object-based Information System Prototype

    OpenAIRE

    Suhyeon Yoo; Sumi Shin; Hyesun Kim

    2014-01-01

    Researchers who use science and technology information were found to ask an information service in which they can excerpt the contents they needed, rather than using the information at article level. In this study, we micronized the contents of scholarly articles into text, image, and table and then constructed a micro-content DB to design a new information system prototype based on this micro-content. After designing the prototype, we performed usability test for this prototype so as to conf...

  7. Prototypical Rod Consolidation Demonstration Project

    International Nuclear Information System (INIS)

    1993-05-01

    The objective of Phase 3 of the Prototypical Rod consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod consolidation System as described in the NUS Phase 2 Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase 3 effort the system was tested on a component, subsystem, and system level. This volume 1, discusses the PRCDP Phase 3 Test Program that was conducted by the HALLIBURTON NUS Environmental Corporation under contract AC07-86ID12651 with the United States Department of Energy. This document, Volume 1, Book 4 discusses the following topics: Rod Compaction/Loading System Test Results and Analysis Report; Waste Collection System Test Results and Analysis Report; Waste Container Transfer Fixture Test Results and Analysis Report; Staging and Cutting Table Test Results and Analysis Report; and Upper Cutting System Test Results and Analysis Report

  8. Prototypical Rod Consolidation Demonstration Project

    International Nuclear Information System (INIS)

    1993-05-01

    The objective of Phase 3 of the Prototypical Rod consolidation Demonstration Project (PRCDP) was to procure, fabricate, assemble, and test the Prototypical Rod consolidation System as described in the NUS Phase 2 Final Design Report. This effort required providing the materials, components, and fabricated parts which makes up all of the system equipment. In addition, it included the assembly, installation, and setup of this equipment at the Cold Test Facility. During the Phase 3 effort the system was tested on a component, subsystem, and system level. This volume 1, discusses the PRCDP Phase 3 Test Program that was conducted by the HALLIBURTON NUS Environmental Corporation under contract AC07-86ID12651 with the United States Department of Energy. This document, Volume 1, Book 5 discusses the following topics: Lower Cutting System Test Results and Analysis Report; NFBC Loading System Test Results and Analysis Report; Robotic Bridge Transporter Test Results and Analysis Report; RM-10A Remotec Manipulator Test Results and Analysis Report; and Manipulator Transporter Test Results and Analysis Report

  9. The Siemens graduate program

    International Nuclear Information System (INIS)

    Schaffler, I.

    2001-01-01

    SIEMENS is an international company acting in various domains: power generation, communication and information, traffic, health...etc. To increase flexibility and activity in a world in constant evolution, the company proposes a graduate program where young people with a special background have the possibility to start an international career in one of the different business areas. This graduate program is also very important in the domain of nuclear energy, where the know-how transfer between the previous generation and the new one is a constant point of interest. (author)

  10. Graduation in Denmark

    DEFF Research Database (Denmark)

    Warburg, Margit

    2009-01-01

    all the characteristics of a rite of passage. The graduates wear a traditional cap with a cross as cockade emblem; this special cross is a symbol of Denmark. For graduates of non-Christian background, alternative cockade emblems are available, e.g. a Star of David or a crescent; this shows...... that the cross emblem is also perceived as a Christian symbol. Social anthropologists Sally Moore and Barbara Myerhoff have suggested a scheme of the categories of religious versus scared for analysing secular rituals where religious symbols are sometimes exhibited. The applicability of their approach...

  11. OPAL Jet Chamber Prototype

    CERN Multimedia

    OPAL was one of the four experiments installed at the LEP particle accelerator from 1989 - 2000. OPAL's central tracking system consists of (in order of increasing radius) a silicon microvertex detector, a vertex detector, a jet chamber, and z-chambers. All the tracking detectors work by observing the ionization of atoms by charged particles passing by: when the atoms are ionized, electrons are knocked out of their atomic orbitals, and are then able to move freely in the detector. These ionization electrons are detected in the dirfferent parts of the tracking system. This piece is a prototype of the jet chambers

  12. Prototyping Augmented Reality

    CERN Document Server

    Mullen, Tony

    2011-01-01

    Learn to create augmented reality apps using Processing open-source programming language Augmented reality (AR) is used all over, and you may not even realize it. Smartphones overlay data onto live camera views to show homes for sale, restaurants, or historical sites. American football broadcasts use AR to show the invisible first-down line on the field to TV viewers. Nike and Budweiser, among others, have used AR in ads. Now, you can learn to create AR prototypes using 3D data, Processing open-source programming language, and other languages. This unique book is an easy-to-follow guide on how

  13. Where have all the graduates gone?

    Science.gov (United States)

    1999-03-01

    Key facts and figures about the labour market for new graduates in the UK were published recently in the IES Annual Graduate Review 1998-99, which indicates that the demand for graduates amongst the traditional recruiters has continued to grow steadily, along with reports of recruitment difficulties. It is noteworthy that last year one in three graduates went into fixed-term or temporary appointments, while many of those who took up permanent jobs went into lower level work that did not make use of their graduate skills. Many graduates are taking more than a year, and sometimes up to three years, to find their way into permanent jobs and careers. Those graduating in computer science, engineering and mathematics, medicine and related subjects, or education have been the most likely to gain high level managerial, professional or technical jobs and have the lowest unemployment rates. In contrast, those with biological science, humanities, social sciences or creative arts degrees are most likely to be unemployed initially. Many new graduates commenced their jobs by earning salaries in the range £10 000-15 000, but they should of course continue to earn more than those lesser qualified, as well as having lower unemployment rates. Of the 400 000 students who graduated in 1998 (more than double the total of a decade ago), over half had first degrees and the rest undergraduate or postgraduate qualifications. Despite the growth, entry to the physical sciences, engineering and technology has been falling, as has the proportion on sandwich courses. Women now comprise the majority of entrants to first degrees but remain under-represented in mathematics, physical science and engineering or technology courses. Interestingly more than one in three students now has a paid job during their course; such work experience can be beneficial to their long-term job searches. In the longer term, numbers of graduates are expected to stay broadly constant over the next three years

  14. OMS FDIR: Initial prototyping

    Science.gov (United States)

    Taylor, Eric W.; Hanson, Matthew A.

    1990-01-01

    The Space Station Freedom Program (SSFP) Operations Management System (OMS) will automate major management functions which coordinate the operations of onboard systems, elements and payloads. The objectives of OMS are to improve safety, reliability and productivity while reducing maintenance and operations cost. This will be accomplished by using advanced automation techniques to automate much of the activity currently performed by the flight crew and ground personnel. OMS requirements have been organized into five task groups: (1) Planning, Execution and Replanning; (2) Data Gathering, Preprocessing and Storage; (3) Testing and Training; (4) Resource Management; and (5) Caution and Warning and Fault Management for onboard subsystems. The scope of this prototyping effort falls within the Fault Management requirements group. The prototyping will be performed in two phases. Phase 1 is the development of an onboard communications network fault detection, isolation, and reconfiguration (FDIR) system. Phase 2 will incorporate global FDIR for onboard systems. Research into the applicability of expert systems, object-oriented programming, fuzzy sets, neural networks and other advanced techniques will be conducted. The goals and technical approach for this new SSFP research project are discussed here.

  15. Live Piloting and Prototyping

    Directory of Open Access Journals (Sweden)

    Francesca Rizzo

    2013-07-01

    Full Text Available This paper presents current trends in service design research concerning large scale projects aimed at generating changes at a local scale. The strategy adopted to achieve this, is to co-design solutions including future users in the development process, prototyping and testing system of products and services before their actual implementation. On the basis of experience achieved in the European Project Life 2.0, this paper discusses which methods and competencies are applied in the development of these projects, eliciting the lessons learnt especially from the piloting phase in which the participatory design (PD approach plays a major role. In the first part, the topic is introduced jointly with the theoretical background where the user center design and participatory design methods are presented; then the Life 2.0 project development is described; finally the experience is discussed from a service design perspective, eliciting guidelines for piloting and prototyping services in a real context of use. The paper concludes reflecting on the designers’ role and competencies needed in this process.

  16. From research plots to prototype biomass plantations

    Energy Technology Data Exchange (ETDEWEB)

    Kenney, W.A.; Vanstone, B.J.; Gambles, R.L.; Zsuffa, L. [Univ. of Toronto, Ontario (Canada)

    1993-12-31

    The development of biomass energy plantations is now expanding from the research plot phase into the next level of development at larger scale plantings. This is necessary to provide: more accurate information on biomass yields, realistic production cost figures, venues to test harvesting equipment, demonstration sites for potential producers, and a supply of feedstock for prototype conversion facilities. The paper will discuss some of these objectives and some of the challenges encountered in the scale-up process associated with a willow prototype plantation project currently under development in Eastern Canada.

  17. Counseling Graduate Students.

    Science.gov (United States)

    Caple, Richard B.

    1995-01-01

    Explores how the understanding of graduate students' special needs and circumstances enhances counseling of this population. Looks at stress factors, educational preparation, delayed gratification, achieving autonomy, intellectual development, and the counseling process. Emphasizes the importance of establishing trust in the therapeutic dialog so…

  18. A knowledge management model for graduate development

    Directory of Open Access Journals (Sweden)

    Eduardo Bustos Farías

    2016-01-01

    Full Text Available The aim of this paper is to present a model for administrative knowledge management for the Graduate Support Division of the Instituto Politécnico Nacional (IPN. This administrative unit is important because it is responsible for managing the institution’s academic services at graduate level. A qualitative methodology was used based on in-depth interviews with graduate-level directors, experts in knowledge management and members of the institution. The results obtained support the use of administrative management tools based on Information Technology (IT, such as the design of a comprehensive dashboard, and the proposal that knowledge management processes be automated with digital repositories. The model identifies factors such as the relationships between people, technology, administrative knowledge and knowledge management processes, and is formed with innovative administrative contributions.

  19. Emotional Intelligence and Graduates - Employers' Perspectives

    OpenAIRE

    Jameson, Ailish; Carthy, Aiden; McGuinness, Colm; McSweeney, Fiona

    2016-01-01

    Research has demonstrated that employers favour graduates who possess higher levels of emotional intelligence. Many initiatives to increase students’ levels of EI have involved ‘whole school’ approaches, whereby generic EI skills programmes are delivered to all students in a third level institute. This paper details an initial survey of employers’ (n = 500) opinions on the importance and current level of graduates’ social and emotional competencies. The survey was completed across fi...

  20. CONSIDERATIONS REGARDING ROMANIAN HIGHER EDUCATION GRADUATES

    Directory of Open Access Journals (Sweden)

    Popovici (Barbulescu Adina

    2012-07-01

    Full Text Available The paper aims at analyzing the dynamics of in Romanian higher education graduates in the 2006-2010 period, both in Romania and by the Romanian development regions. After highlighting the importance of human capital and its education, the paper analyzes the dynamics of Romanian higher education graduates in the targeted period, at both of the above-mentioned levels. The conclusions reveal that, during the analysed period: 2006-2010, the number of female, and, respectively, male higher education graduates, as well as the total number of higher education graduates, continuously increased in the 2006-2010 period at the whole country level and registered an increase trend, as well, by the eight development regions of Romania in the 2006-2010 period, with very few exceptions in some years of the period, in some of the the eight development regions of Romania. Therefore, the Romanian higher education system must correlate the graduates number with the number of work places in the Romanian economy, and take into account the necessities imposed by the participation at international competition.

  1. Licensing management system prototype system design

    International Nuclear Information System (INIS)

    Immerman, W.H.; Arcuni, A.A.; Elliott, J.M.; Chapman, L.D.

    1983-11-01

    This report is a design document for a prototype implementation of a licensing management system (LMS) as defined in SAND83-7080. It describes the concept of operations for full implementation of an LMS in accordance with the previously defined functional requirements. It defines a subset of a full LMS suitable for meeting prototype implementation goals, and proposes a system design for this subset. The report describes overall system design considerations consistent with, but more explicit than the general characteristics required by the LMS functional definition. A high level design is presented for just those functions selected for prototype implementation. The report also provides a data element dictionary describing the structured logical data elements required to implement the selected functions

  2. Reflection of the Development of Professional Graduates Education in China

    Directory of Open Access Journals (Sweden)

    Zhao Jing

    2013-12-01

    Full Text Available The development of professional degree graduates education plays a crucial role in social economy development and the industrial restructuring, promotes academic degrees and graduates education growth and could further ameliorate China's professional degrees education system. Currently, the professional degree graduates education meet with some problems, such as low level of professional degrees education, the scale of development imbalances, lack of innovation in training mode, quality assurance and management system is incomplete, the policy formulated backwardness. As a higher education theory researcher, rational thinking of these problems would help to stimulate the long-term development of professional degree graduates education and to provide educational reference.

  3. Analysis of opinion about nuclear energy and sustainability in a graduate level population; Analisis de opinion sobre la energia nuclear y sustentabilidad en una poblacion de nivel superior

    Energy Technology Data Exchange (ETDEWEB)

    Meza L, C.D.; Arredondo S, C. [IPN, ESFM, 07738 Mexico D.F. (Mexico)]. e-mail: angie2esa@hotmail.com

    2007-07-01

    The Mexican society has a modest knowledge of the nuclear energy, even at the participant students of superior education level in this survey is finds a scarce compression with regard to their obtaining, use and manage. As a result of the lack of interest of the same society and at the problems that know each other like they are: the pollutants that it produces those nuclear waste and the possible use or warlike end, a fear is believed about this energy type. In the Superior School of Physics and Mathematics there is the possibility to make studies so much at master degree level in the one fear of the nuclear energy and the applications of the same one in peaceful uses. However, particularly the studies at master level seem to be immersed in a crisis that requires of different supports to be resolved. For all it previous was thought in carrying out a survey inside a student population with superior level to know the opinion and the knowledge on the nuclear energy in Mexico. In this work the results of the survey are analyzed with the purpose of to determine which is the knowledge of the community mentioned regarding the other energy types, the impact that they have these in the environment, the sustenance of the same ones and in particular on knowledge about the nuclear energy considering the aspects before mentioned. With base had said analysis settles down that the interviewed community knows very little about the nuclear energy but they show interest to study and to obtain bigger information about the same one, for what is very important to diffuse but and better information on the nuclear energy to the population's strata, because it is of supposing that the rest of the population has erroneous information on the nuclear energy. In particular for the community of the Superior School of Physics and Mathematics the diffusion of all the benefits of the peaceful applications of the nuclear energy, including the capacity to generate enormous quantities and

  4. Impact of Practice-Based Instruction on Graduate Programs in the Pharmaceutical Sciences.

    Science.gov (United States)

    Zografi, George

    1979-01-01

    Graduate education in the pharmaceutical sciences is examined. It is suggested that greater flexibility and quality of masters and PhD programs in pharmacy could increase enrollment levels in the graduate pharmaceutical studies. (SF)

  5. Prototypes as Platforms for Participation

    DEFF Research Database (Denmark)

    Horst, Willem

    developers, and design it accordingly. Designing a flexible prototype in combination with supportive tools to be used by both interaction designers and non-designers during development is introduced as a way to open up the prototyping process to these users. Furthermore I demonstrate how such a flexible...... on prototyping, by bringing to attention that the prototype itself is an object of design, with its users and use context, which deserves further attention. Moreover, in this work I present concrete tools and methods that can be used by interaction designers in practice. As such this work addresses both......The development of interactive products in industry is an activity involving different disciplines – such as different kinds of designers, engineers, marketers and managers – in which prototypes play an important role. On the one hand, prototypes can be powerful boundary objects and an effective...

  6. Prototype Stilbene Neutron Collar

    Energy Technology Data Exchange (ETDEWEB)

    Prasad, M. K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Shumaker, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Snyderman, N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Verbeke, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wong, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-10-26

    A neutron collar using stilbene organic scintillator cells for fast neutron counting is described for the assay of fresh low enriched uranium (LEU) fuel assemblies. The prototype stilbene collar has a form factor similar to standard He-3 based collars and uses an AmLi interrogation neutron source. This report describes the simulation of list mode neutron correlation data on various fuel assemblies including some with neutron absorbers (burnable Gd poisons). Calibration curves (doubles vs 235U linear mass density) are presented for both thermal and fast (with Cd lining) modes of operation. It is shown that the stilbene collar meets or exceeds the current capabilities of He-3 based neutron collars. A self-consistent assay methodology, uniquely suited to the stilbene collar, using triples is described which complements traditional assay based on doubles calibration curves.

  7. Brachial Plexus Blocker Prototype

    Directory of Open Access Journals (Sweden)

    Stéphanie Coelho Monteiro

    2017-08-01

    Full Text Available Although the area of surgical simulation has been the subject of study in recent years, it is still necessary to develop artificial experimental models with a perspective to dismiss the use of biological models. Since this makes the simulators more real, transferring the environment of the health professional to a physical or virtual reality, an anesthetic prototype has been developed, where the motor response is replicated when the brachial plexus is subjected to a proximal nervous stimulus. Using action-research techniques, with this simulator it was possible to validate that the human nerve response can be replicated, which will aid the training of health professionals, reducing possible risks in a surgical environment.

  8. Employablity Skills among Graduates of Estate Management in Nigeria

    Science.gov (United States)

    Egbenta, Idu Robert

    2015-01-01

    There is wide claim that employers have a high level of dissatisfaction associated with graduates from Nigeria higher institutions of learning. This paper examines whether graduates of estate management in Nigeria higher institutions have employability skills for productive employment. The study randomly sampled 59 principal partners or heads of…

  9. Motivating American Indians into Graduate Studies. ERIC Digest.

    Science.gov (United States)

    Kidwell, Clara Sue

    There are no quick and easy tips to motivating American Indian students into graduate education. The decision to make a commitment of time and money to graduate training, particularly at the doctoral level, and the ability to succeed in such a program, is affected by a number of factors: (1) parental and peer encouragement; (2) awareness of career…

  10. Employment Satisfaction of University Graduates with Learning Disabilities

    Science.gov (United States)

    Madaus, Joseph W.; Zhao, Jiarong; Ruban, Lilia

    2008-01-01

    Because of its significant impact on overall life satisfaction, employment satisfaction is one marker for determining successful adult outcomes. The present investigation reports the perceptions of employment satisfaction for 500 graduates with learning disabilities from three postsecondary institutions. The graduates reported high levels of…

  11. Retention and Graduation Rates: Insights from an Extended Longitudinal View

    Science.gov (United States)

    Boden, Gary T.

    2012-01-01

    This study examines a 118-year continuous record of retention and graduation rates at a public university for long-term trends not observable in shorter studies. While the first year retention rates stayed level over much of this period, second year rates increased steadily by 1.2% per decade. In contrast, graduation rates at 4 years compared to 6…

  12. tential mapping, namely electrolytic tank model, for graduate and ...

    Indian Academy of Sciences (India)

    A very useful experiment of two dimensional po- tential mapping, namely electrolytic tank model, for graduate and post graduate level physics stu- dents is given here. Laplace's equation is solved for the above and the results are compared with the experiment. The agreement· is so good that this is extended to complex ...

  13. Orientation Programming for Graduate Students: An Institutional Imperative.

    Science.gov (United States)

    Vickio, Craig J.; Tack, Martha W.

    1989-01-01

    Orientation at the graduate level can serve many functions such as reducing anxiety, familiarizing students with new academic challenges, and orienting students' spouses. It can also improve student retention, satisfaction, and success. Guidelines for developing programs responsive to graduate students' diverse needs are offered. (Author/MSE)

  14. Dieting Behaviors of Young Women Post-College Graduation

    Science.gov (United States)

    Soliah, LuAnn; Walter, Janelle; Antosh, Deeanna

    2007-01-01

    Obesity is a major public health epidemic in the United States. During the past decade, obesity has increased across all education levels, including college graduates. The purpose of this research was to study the health decisions that young women, post-college graduation make regarding their food intake. The subjects in this study completed a…

  15. Applying lessons learned from the USAID family planning graduation experience to the GAVI graduation process.

    Science.gov (United States)

    Shen, Angela K; Farrell, Marguerite M; Vandenbroucke, Mary F; Fox, Elizabeth; Pablos-Mendez, Ariel

    2015-07-01

    window into understanding one approach to graduation from donor assistance. The process itself-involving transparent country-level partners well in advance of graduation-appears a valuable lesson towards success. Published by Oxford University Press 2014. This work is written by US Government employees and is in the public domain in the US.

  16. Naval Prototype Optical Interferometer (NPOI)

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Used for astrometry and astronomical imaging, the Naval Prototype Optical Interferometer (NPOI) is a distributed aperture optical telescope. It is operated...

  17. The Returns to Quality in Graduate Education

    Science.gov (United States)

    Stevenson, Adam

    2016-01-01

    This paper estimates the monetary return to quality in US graduate education, controlling for cognitive ability and self-selection across award level, program quality, and field-of-study. In most program types, I cannot reject the hypothesis of no returns to either degree completion or program quality. Important exceptions include master's…

  18. The Delphi Method for Graduate Research

    Science.gov (United States)

    Skulmoski, Gregory J.; Hartman, Francis T.; Krahn, Jennifer

    2007-01-01

    The Delphi method is an attractive method for graduate students completing masters and PhD level research. It is a flexible research technique that has been successfully used in our program at the University of Calgary to explore new concepts within and outside of the information systems body of knowledge. The Delphi method is an iterative process…

  19. Graduate curriculum: A need for a change

    Directory of Open Access Journals (Sweden)

    Sungatullina Dilyana D.

    2017-01-01

    Full Text Available Over the last couple of years there was an increase in graduates’ willingness to interleave their vocational careers with academic instruction at the university. Hence, the authors conducted evaluation and needs analysis of the skills crucial for graduate students to possess. The current study analyzed the attitude of 150 KFU IMEF graduates towards their core requirements within the framework of modern educational environment. The results showed that the majority of the respondents consider knowledge of teaching methodology (a new topic introduction, the material delivery, its further practice and revision, effective groupwork and public speaking to be of great importance. The paper concludes with suggestions on the need for the development and the introduction of a cutting-edge course at a Master’s level tailored to graduates to enhance the skills applicable not only in the professional field but the educational environment as well.

  20. Disparities in new graduate transition from multiple stakeholder perspectives.

    Science.gov (United States)

    Adamack, Monica; Rush, Kathy L

    2014-09-01

    The purpose of this qualitative study was to understand multiple stakeholder perspectives of new graduate (NG) transition programs. It was part of a larger mixed-methods study (2011) designed to provide a comprehensive assessment of new graduate nurse transition best practices, across six British Columbia health authorities. Data collection involved individual interviews with academic nurse educators (n=4) and separate focus groups with new graduate (n=48) and front-line nurse leaders (n=69). Disparity emerged as the overriding theme and described differences between stakeholder group perspectives, between expectations and reality, and within and across programs. Four disparities emerged: entry-level education and practice, perspectives on employment and career planning, transition program elements and support. Despite general satisfaction with undergraduate preparation, theory-practice gaps were identified. New Graduates experienced misalignments between their employment expectations and their realities. The employed student nurse program in which many new graduates had participated did not always yield employment, but when it did, differences in transitional expectations arose between new graduates and leaders. There was considerable variation across and within provincial new graduate programs with respect to orientation, supernumerary time and preceptorship characteristics, including lack of training. Disparities arose in the nature, amount of and access to support and the monitoring of new graduate progress. Findings reinforced organizational complexities and the importance of communication across education and practice sectors. This paper uncovers the tensions between the perspectives of new graduates and nurse leaders about transitional programs and opens the opportunity to collaborate in aligning the perspectives.

  1. Close to Home: Employment Outcomes for Recent Radiation Oncology Graduates

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed, Awad A. [Department of Radiation Oncology, Sylvester Comprehensive Cancer Center, University of Miami Health System, Miami, Florida (United States); Holliday, Emma B. [Department of Radiation Oncology, The University of Texas M. D. Anderson Cancer Center, Houston, Texas (United States); Ileto, Jan [New York University, New York, New York (United States); Yoo, Stella K. [Department of Radiation Oncology, University of Southern California, Los Angeles, California (United States); Green, Michael [Department of Radiation Oncology, University of Michigan, Ann Arbor, Michigan (United States); Orman, Amber [Department of Radiation Oncology, H. Lee Moffitt Cancer Center and Research Institute, Tampa, Florida (United States); Deville, Curtiland [Department of Radiation Oncology and Molecular Radiation Sciences, Johns Hopkins University School of Medicine, Baltimore, Maryland (United States); Jagsi, Reshma [Department of Radiation Oncology, University of Michigan, Ann Arbor, Michigan (United States); Haffty, Bruce G. [Department of Radiation Oncology, Rutgers-Robert Wood Johnson Medical School, New Brunswick, New Jersey (United States); Wilson, Lynn D., E-mail: Lynn.wilson@yale.edu [Department of Therapeutic Radiology, Yale School of Medicine and Yale Cancer Center, New Haven, Connecticut (United States)

    2016-07-01

    Purpose: To characterize the practice type and location of radiation oncology (RO) residents graduating in 2013. Methods and Materials: Graduates completing RO residency in 2013 were identified, and for each, postgraduate practice setting (academic vs private practice) and location were identified. Characteristics of the graduates, including details regarding their institutions of medical school and residency education, were collected and analyzed. Results: Data were obtained from 146 of the 154 RO graduates from the class of 2013. Employment data were available for 142 graduates. Approximately one-third of graduates were employed in the same state as residency (36.6%), approximately two-thirds (62.0%) in the same region as residency, and nearly three-fourths (73.9%) in the same region as medical school or residency completion. Of the 66 graduates (46.5%) working in academics, 40.9% were at the same institution where they completed residency. Most trainees (82.4%) attended medical schools with RO residency programs. Conclusions: Although personal factors may attract students to train in a particular area, the location of medical school and residency experiences may influence RO graduate practice location choice. Trends in the geographic distribution of graduating radiation oncologists can help identify and better understand disparities in access to RO care. Steps to improve access to RO care may include interventions at the medical student or resident level, such as targeting students at medical schools without associated residency programs and greater resident exposure to underserved areas.

  2. Close to Home: Employment Outcomes for Recent Radiation Oncology Graduates

    International Nuclear Information System (INIS)

    Ahmed, Awad A.; Holliday, Emma B.; Ileto, Jan; Yoo, Stella K.; Green, Michael; Orman, Amber; Deville, Curtiland; Jagsi, Reshma; Haffty, Bruce G.; Wilson, Lynn D.

    2016-01-01

    Purpose: To characterize the practice type and location of radiation oncology (RO) residents graduating in 2013. Methods and Materials: Graduates completing RO residency in 2013 were identified, and for each, postgraduate practice setting (academic vs private practice) and location were identified. Characteristics of the graduates, including details regarding their institutions of medical school and residency education, were collected and analyzed. Results: Data were obtained from 146 of the 154 RO graduates from the class of 2013. Employment data were available for 142 graduates. Approximately one-third of graduates were employed in the same state as residency (36.6%), approximately two-thirds (62.0%) in the same region as residency, and nearly three-fourths (73.9%) in the same region as medical school or residency completion. Of the 66 graduates (46.5%) working in academics, 40.9% were at the same institution where they completed residency. Most trainees (82.4%) attended medical schools with RO residency programs. Conclusions: Although personal factors may attract students to train in a particular area, the location of medical school and residency experiences may influence RO graduate practice location choice. Trends in the geographic distribution of graduating radiation oncologists can help identify and better understand disparities in access to RO care. Steps to improve access to RO care may include interventions at the medical student or resident level, such as targeting students at medical schools without associated residency programs and greater resident exposure to underserved areas.

  3. Close to Home: Employment Outcomes for Recent Radiation Oncology Graduates.

    Science.gov (United States)

    Ahmed, Awad A; Holliday, Emma B; Ileto, Jan; Yoo, Stella K; Green, Michael; Orman, Amber; Deville, Curtiland; Jagsi, Reshma; Haffty, Bruce G; Wilson, Lynn D

    2016-07-01

    To characterize the practice type and location of radiation oncology (RO) residents graduating in 2013. Graduates completing RO residency in 2013 were identified, and for each, postgraduate practice setting (academic vs private practice) and location were identified. Characteristics of the graduates, including details regarding their institutions of medical school and residency education, were collected and analyzed. Data were obtained from 146 of the 154 RO graduates from the class of 2013. Employment data were available for 142 graduates. Approximately one-third of graduates were employed in the same state as residency (36.6%), approximately two-thirds (62.0%) in the same region as residency, and nearly three-fourths (73.9%) in the same region as medical school or residency completion. Of the 66 graduates (46.5%) working in academics, 40.9% were at the same institution where they completed residency. Most trainees (82.4%) attended medical schools with RO residency programs. Although personal factors may attract students to train in a particular area, the location of medical school and residency experiences may influence RO graduate practice location choice. Trends in the geographic distribution of graduating radiation oncologists can help identify and better understand disparities in access to RO care. Steps to improve access to RO care may include interventions at the medical student or resident level, such as targeting students at medical schools without associated residency programs and greater resident exposure to underserved areas. Copyright © 2016 Elsevier Inc. All rights reserved.

  4. Window prototypes during the project

    DEFF Research Database (Denmark)

    Schultz, Jørgen Munthe

    1996-01-01

    The conditions for the PASSYS test and the results of the measurements on one of the aerogel window prototypes are described.......The conditions for the PASSYS test and the results of the measurements on one of the aerogel window prototypes are described....

  5. Rapid prototyping: een veelbelovende methode

    NARCIS (Netherlands)

    Haverman, T.M.; Karagozoglu, K.H.; Prins, H.; Schulten, E.A.J.M.; Forouzanfar, T.

    2013-01-01

    Rapid prototyping is a method which makes it possible to produce a three-dimensional model based on two-dimensional imaging. Various rapid prototyping methods are available for modelling, such as stereolithography, selective laser sintering, direct laser metal sintering, two-photon polymerization,

  6. Role model and prototype matching

    DEFF Research Database (Denmark)

    Lykkegaard, Eva; Ulriksen, Lars

    2016-01-01

    ’ meetings with the role models affected their thoughts concerning STEM students and attending university. The regular self-to-prototype matching process was shown in real-life role-models meetings to be extended to a more complex three-way matching process between students’ self-perceptions, prototype...

  7. Virtual Prototyping at CERN

    Science.gov (United States)

    Gennaro, Silvano De

    The VENUS (Virtual Environment Navigation in the Underground Sites) project is probably the largest Virtual Reality application to Engineering design in the world. VENUS is just over one year old and offers a fully immersive and stereoscopic "flythru" of the LHC pits for the proposed experiments, including the experimental area equipment and the surface models that are being prepared for a territorial impact study. VENUS' Virtual Prototypes are an ideal replacement for the wooden models traditionally build for the past CERN machines, as they are generated directly from the EUCLID CAD files, therefore they are totally reliable, they can be updated in a matter of minutes, and they allow designers to explore them from inside, in a one-to-one scale. Navigation can be performed on the computer screen, on a stereoscopic large projection screen, or in immersive conditions, with an helmet and 3D mouse. By using specialised collision detection software, the computer can find optimal paths to lower each detector part into the pits and position it to destination, letting us visualize the whole assembly probess. During construction, these paths can be fed to a robot controller, which can operate the bridge cranes and build LHC almost without human intervention. VENUS is currently developing a multiplatform VR browser that will let the whole HEP community access LHC's Virtual Protoypes over the web. Many interesting things took place during the conference on Virtual Reality. For more information please refer to the Virtual Reality section.

  8. UA1 prototype detector

    CERN Multimedia

    1980-01-01

    Prototype of UA1 central detector inside a plexi tube. The UA1 experiment ran at CERN's Super Proton Synchrotron and made the Nobel Prize winning discovery of W and Z particles in 1983. The UA1 central detector was crucial to understanding the complex topology of proton-antiproton events. It played a most important role in identifying a handful of Ws and Zs among billions of collisions. The detector was essentially a wire chamber - a 6-chamber cylindrical assembly 5.8 m long and 2.3 m in diameter, the largest imaging drift chamber of its day. It recorded the tracks of charged particles curving in a 0.7 Tesla magnetic field, measuring their momentum, the sign of their electric charge and their rate of energy loss (dE/dx). Atoms in the argon-ethane gas mixture filling the chambers were ionised by the passage of charged particles. The electrons which were released drifted along an electric field shaped by field wires and were collected on sense wires. The geometrical arrangement of the 17000 field wires and 6...

  9. Delayed Workforce Entry and High Emigration Rates for Recent Canadian Radiation Oncology Graduates

    Energy Technology Data Exchange (ETDEWEB)

    Loewen, Shaun K., E-mail: shaun.loewen@cancercare.mb.ca [CancerCare Manitoba, Winnipeg, MB (Canada); Halperin, Ross; Lefresne, Shilo [BC Cancer Agency, Vancouver, BC (Canada); Trotter, Theresa [Tom Baker Cancer Centre, Calgary, AB (Canada); Stuckless, Teri [Dr H. Bliss Murphy Cancer Centre, St. John' s, NL (Canada); Brundage, Michael [Cancer Centre of Southeastern Ontario, Kingston, ON (Canada)

    2015-10-01

    Purpose: To determine the employment status and location of recent Canadian radiation oncology (RO) graduates and to identify current workforce entry trends. Methods and Materials: A fill-in-the-blank spreadsheet was distributed to all RO program directors in December 2013 and June 2014, requesting the employment status and location of their graduates over the last 3 years. Visa trainee graduates were excluded. Results: Response rate from program directors was 100% for both survey administrations. Of 101 graduates identified, 99 (98%) had known employment status and location. In the December survey, 5 2013 graduates (16%), 17 2012 graduates (59%), and 18 2011 graduates (75%) had permanent staff employment. Six months later, 5 2014 graduates (29%), 15 2013 graduates (48%), 24 2012 graduates (83%), and 21 2011 graduates (88%) had secured staff positions. Fellowships and temporary locums were common for those without staff employment. The proportion of graduates with staff positions abroad increased from 22% to 26% 6 months later. Conclusions: Workforce entry for most RO graduates was delayed but showed steady improvement with longer time after graduation. High emigration rates for jobs abroad signify domestic employment challenges for newly certified, Canadian-trained radiation oncologists. Coordination on a national level is required to address and regulate radiation oncologist supply and demand disequilibrium in Canada.

  10. Delayed Workforce Entry and High Emigration Rates for Recent Canadian Radiation Oncology Graduates.

    Science.gov (United States)

    Loewen, Shaun K; Halperin, Ross; Lefresne, Shilo; Trotter, Theresa; Stuckless, Teri; Brundage, Michael

    2015-10-01

    To determine the employment status and location of recent Canadian radiation oncology (RO) graduates and to identify current workforce entry trends. A fill-in-the-blank spreadsheet was distributed to all RO program directors in December 2013 and June 2014, requesting the employment status and location of their graduates over the last 3 years. Visa trainee graduates were excluded. Response rate from program directors was 100% for both survey administrations. Of 101 graduates identified, 99 (98%) had known employment status and location. In the December survey, 5 2013 graduates (16%), 17 2012 graduates (59%), and 18 2011 graduates (75%) had permanent staff employment. Six months later, 5 2014 graduates (29%), 15 2013 graduates (48%), 24 2012 graduates (83%), and 21 2011 graduates (88%) had secured staff positions. Fellowships and temporary locums were common for those without staff employment. The proportion of graduates with staff positions abroad increased from 22% to 26% 6 months later. Workforce entry for most RO graduates was delayed but showed steady improvement with longer time after graduation. High emigration rates for jobs abroad signify domestic employment challenges for newly certified, Canadian-trained radiation oncologists. Coordination on a national level is required to address and regulate radiation oncologist supply and demand disequilibrium in Canada. Copyright © 2015 Elsevier Inc. All rights reserved.

  11. Delayed Workforce Entry and High Emigration Rates for Recent Canadian Radiation Oncology Graduates

    International Nuclear Information System (INIS)

    Loewen, Shaun K.; Halperin, Ross; Lefresne, Shilo; Trotter, Theresa; Stuckless, Teri; Brundage, Michael

    2015-01-01

    Purpose: To determine the employment status and location of recent Canadian radiation oncology (RO) graduates and to identify current workforce entry trends. Methods and Materials: A fill-in-the-blank spreadsheet was distributed to all RO program directors in December 2013 and June 2014, requesting the employment status and location of their graduates over the last 3 years. Visa trainee graduates were excluded. Results: Response rate from program directors was 100% for both survey administrations. Of 101 graduates identified, 99 (98%) had known employment status and location. In the December survey, 5 2013 graduates (16%), 17 2012 graduates (59%), and 18 2011 graduates (75%) had permanent staff employment. Six months later, 5 2014 graduates (29%), 15 2013 graduates (48%), 24 2012 graduates (83%), and 21 2011 graduates (88%) had secured staff positions. Fellowships and temporary locums were common for those without staff employment. The proportion of graduates with staff positions abroad increased from 22% to 26% 6 months later. Conclusions: Workforce entry for most RO graduates was delayed but showed steady improvement with longer time after graduation. High emigration rates for jobs abroad signify domestic employment challenges for newly certified, Canadian-trained radiation oncologists. Coordination on a national level is required to address and regulate radiation oncologist supply and demand disequilibrium in Canada

  12. Dental hygienists' perceptions of barriers to graduate education.

    Science.gov (United States)

    Boyd, Linda D; Bailey, Angela

    2011-08-01

    To advance the profession of dental hygiene, graduate education is necessary to support growth in research, education, administration, and practice in the discipline and to sustain credibility in a climate in which other health professions require entry-level master's and doctoral degrees. The purpose of this study was to explore what dental hygienists perceive as barriers to pursuing a graduate degree. A survey was developed based on the literature and other national surveys. Data were collected from 160 respondents to the survey: 50 percent held an entry-level baccalaureate degree in dental hygiene, while the rest held an entry-level associate degree (48 percent) or certificate (2 percent) in dental hygiene. All respondents had completed a bachelor's degree. The top five barriers these respondents identified in pursuing graduate education were as follows: 1) cost of graduate education, 2) family responsibilities are too great, 3) concerns about personal funding to pay for graduate education, 4) finding time for graduate school while working, and 5) fear of thesis research. Dental hygiene is one of the few health professions that still have entry-level degrees at the associate and baccalaureate levels. The profession needs to reduce such barriers to enable dental hygienists to pursue graduate education and thus ensure an adequate supply of future leaders, educators, and researchers.

  13. Fewer Diplomas for Men: The Influence of College Experiences on the Gender Gap in College Graduation

    Science.gov (United States)

    Ewert, Stephanie

    2012-01-01

    Women's advantage in college graduation is evident at all socioeconomic levels and for most racial and ethnic groups. This study examines whether college experiences critical to persistence to graduation, including college major, attendance patterns, social integration, and academic performance, contribute to this gender gap in graduation.…

  14. Information Management Graduates' Accounts of Their Employability: A Case Study from the University of Sheffield

    Science.gov (United States)

    Cox, Andrew M.; Al Daoud, Mohammad; Rudd, Stephanie

    2013-01-01

    Ensuring that graduates are employable is an important priority for universities. It is challenging for fields such as Information Management (IM), that are not fully understood by employers and where there is no very clearly defined entry level job market. This paper takes a graduate identity perspective to explore how IM graduates from the…

  15. Co-Designing and Co-Teaching Graduate Qualitative Methods: An Innovative Ethnographic Workshop Model

    Science.gov (United States)

    Cordner, Alissa; Klein, Peter T.; Baiocchi, Gianpaolo

    2012-01-01

    This article describes an innovative collaboration between graduate students and a faculty member to co-design and co-teach a graduate-level workshop-style qualitative methods course. The goal of co-designing and co-teaching the course was to involve advanced graduate students in all aspects of designing a syllabus and leading class discussions in…

  16. Development of an appropriate resource information system to support agricultural management at farm enterprise level : a prototype design for a decision support system in Moghan Agro-industrial Complex, Iran

    NARCIS (Netherlands)

    Sharifi, M.A.

    1992-01-01

    This thesis describes development of and experimentation with a prototype of an appropriate resource information system that improves decision making processes in farm management The system includes a geographic information system with a powerful process model that forms a decision support

  17. Is That Graduate Degree Worth It? Comparing the Recruitment of Undergraduate and Graduate Degree Job Applicants

    Science.gov (United States)

    Richardson, R. M.

    2001-12-01

    One could argue from a business prospective that colleges and universities are not working hard enough to train students for life in the business and civic world, at either the undergraduate or graduate levels. What is it that employers are looking for in students? How different are the skills and attributes employers are looking for between undergraduate and graduate students? How unique are the geosciences in this respect? At the undergraduate level recruiters have spoken loud and clear about what they want. According to the dean of the business school here at the University of Arizona, recruiters at the undergraduate degree level in business base less than half of their hiring decision on specific content knowledge in the discipline, and correspondingly more than half on the so-called soft skills ... ability to apply knowledge in new situations, ability to think critically, ability to communicate with others in both written and oral forms, ability to work in teams, ability to work with a diverse set of employees and customers (especially, but not limited to, the global job market), etc. How true is this at the graduate level, where students have typically spent 4-6 years specializing in a discipline? Is there a set of fundamental knowledge that employers are looking for at the graduate level? Are the so-called soft skills correspondingly less important? I will present results from a survey of graduate programs and industry recruiters addressing these questions, and highlight the areas of overlap and difference between undergraduates and graduates looking for jobs. I will concentrate specifically on jobs in the oil industry and on both masters and Ph.D. programs.

  18. Otoplasty: A graduated approach.

    Science.gov (United States)

    Foda, H M

    1999-01-01

    Numerous otoplastic techniques have been described for the correction of protruding ears. Technique selection in otoplasty should be done only after careful analysis of the abnormal anatomy responsible for the protruding ear deformity. A graduated surgical approach is presented which is designed to address all contributing factors to the presenting auricular deformity. The approach starts with the more conservative cartilage-sparing suturing techniques, then proceeds to incorporate other more aggressive cartilage weakening maneuvers. Applying this approach resulted in better long-term results with less postoperative lateralization than that encountered on using the cartilage-sparing techniques alone.

  19. INTRODUCTION: GRADUATE STUDENT SCHOLARSHIP

    Directory of Open Access Journals (Sweden)

    Laverne Jacobs

    2015-02-01

    Full Text Available The Windsor Yearbook of Access to Justice is proud to publish issue 32 (1. This issue features a special section highlighting the scholarship of graduate students. While it is always a pleasure to read promising work by newer scholars in the fields of law and social justice, we are certain that this collection of articles represents some of the finest and thought-provoking scholarship stemming from current graduate students in law. The articles stem from a graduate student essay contest that WYAJ held in 2013 and for which we received many submissions. The collection of selected papers offers a view of legal and interdisciplinary research examining issues that are topically diverse but which are all of deep, long-term importance to the world of access to justice. A reader of the special section on Graduate Student Scholarship will find explorations of access to justice from the perspectives of equality rights, discretion, adjudication and methods of legal service delivery, to name a few. A prize was offered to two papers judged to be of exceptional quality. I am very pleased to announce that the winners of those two prizes are Andrew Pilliar, for his article “Exploring a Law Firm Business Model to Improve Access to Justice” and Blair A. Major, for his contribution, “Religion and Law in R v NS: Finding Space to Re-think the Balancing Analysis”. The Editorial Board thanks all those who submitted papers to the contest and to this final special issue of the Windsor Yearbook of Access to Justice. Another notable feature of this issue is the introduction of a section called Research Notes. The Yearbook will periodically publish peer-reviewed research notes that present the findings of empirical (quantitative, qualitative or mixed method research studies. This section aims to contribute to the growing and important body of empirical scholarship within the realm of access to justice socio-legal research. We hope that you enjoy

  20. Design and Measurement of the NSLS II Quadrupole Prototypes

    Energy Technology Data Exchange (ETDEWEB)

    Rehak,M.; Jain, A. K.; Skaritka, J.; Spataro, C.

    2009-05-04

    The design and measurement of the NSLS-II ring quadrupoles prototypes are presented. These magnets are part of a larger prototype program described in [1]. Advances in software, hardware, and manufacturing have led to some new level of insight in the quest for the perfect magnet design. Three geometric features are used to minimize the first three allowed harmonics by way of optimization. Validations through measurement and confidence levels in calculations are established.

  1. Prototype moving-ring reactor

    International Nuclear Information System (INIS)

    Smith, A.C. Jr.; Ashworth, C.P.; Abreu, K.E.

    1981-01-01

    The objective of this work was to design a prototype fusion reactor based on fusion plasmas confined as ''Compact Toruses.' Six major criteria guided the prototype design. The prototype must: (1) produce net electricity decisively (P/sub net/ >70% of P/sub gross/), with P/sub net/ approximately 100 MW(e); (2) have small physical size (low project cost) but commercial plant; (3) have all features required of commerical plants; (4) avoid unreasonable extrapolation of technology; (5) minimize nuclear issues substantially, i.e. accident and waste issues of public concern, and (6) be modular (to permit repetitive fabrication of parts) and be maintainable with low occupational radiological exposures

  2. The Need for a Study into Stakeholders Needs and Expectations of Schools Graduates English Language Level and Skills for Entry into the Tertiary Education Level in the Sultanate of Oman

    OpenAIRE

    Khalid Salim Al-Jardani

    2014-01-01

    During the last forty years, the Sultanate of Oman has undergone rapid economic growth and development. As a result, the country is facing the challenge of preparing its youth for life and work in the modern global economy. It is essential that young people are provided with a high level of knowledge and skills in Maths, Science, Technology and Languages to deal with the changes in society, life style, technology and international business (Ministry of Education, 2010). High levels of knowled...

  3. Practice Characteristics of Recent Illinois College of Optometry Graduates.

    Science.gov (United States)

    Gailmard, Neil B.; And Others

    1984-01-01

    Demographic information regarding mode of practice, income and satisfaction level is provided for 1978-82 graduates of the Illinois College of Optometry. A practice management questionnaire is appended. (Author/MLW)

  4. WorldSID Prototype Dummy Biomechanical Responses.

    Science.gov (United States)

    Cesari, D; Compigne, S; Scherer, R; Xu, L; Takahashi, N; Page, M; Asakawa, K; Kostyniuk, G; Hautmann, E; Bortenschlager, K; Sakurai, M; Harigae, T

    2001-11-01

    The results of biomechanical testing of the WorldSID prototype dummy are presented in this paper. The WorldSID dummy is a new, advanced Worldwide Side Impact Dummy that has the anthropometry of a mid-sized adult male. The first prototype of this dummy has been evaluated by the WorldSID Task Group against previously established corridors for its critical body regions. The response corridors are defined in the International Organization of Standardization (ISO) Technical Report 9790. The prototype is the first version of the WorldSID dummy to be built and tested. This dummy has been subjected to a rigorous program of testing to evaluate, first and foremost its biofidelity, but also its repeatability. Following this initial evaluation, any required modifications will be incorporated into a pre-production version of the WorldSID dummy so that it rates "good" to "excellent" on the ISO dummy biofidelity scale - a rating exceeding that of all current side impact dummies. Also, the overall WorldSID repeatability must not exceed a coefficient of variation of 7% at injury assessment level and this has to be verified for the different body regions. The dummy's head, neck, thorax, abdomen and pelvis were evaluated against the ISO technical report requirements. Testing included drop tests, pendulum impacts, and sled tests. The biofidelity rating of the WorldSID prototype was calculated using the weighted biomechanical test response procedure developed by ISO. The paper presents the results of the testing, which give a very positive indication of the dummy's potential. Based on this evaluation of the dummy biofidelity, the WorldSID prototype dummy exhibits a biofidelity rating of 6.15 that corresponds to an ISO biofidelity classification of "fair". In addition, the dummy shows good repeatability with a global coefficient of variation of 3.30% for the pendulum and rigid sled tests.

  5. Comparison with the Typical College Student Predicts Graduation When Identity Is Uncertain

    Science.gov (United States)

    Lane, David J.

    2017-01-01

    This study investigated the effect of personal identity and social comparison on college graduation. First-year college students completed an online survey measuring exploration and commitment to personal identity and perceptions of the prototypical student. Those who perceived the typical student as favorable but dissimilar to themselves had the…

  6. Promoting Inclusive Holistic Graduate Admissions in Educational Leadership Preparation Programs

    Directory of Open Access Journals (Sweden)

    Christa Boske

    2018-04-01

    Full Text Available Aspiring and practicing school leaders often identify graduate degrees as playing a significant role in achieving educational access and engaging in building, district-wide, regional, state, and national decision-making regarding practice and policy impacting marginalized populations in K–12 U.S. schools. The rationale behind initiating discourse on graduate student involvement grows out of current policy and reform initiatives requiring increased accountability for improved student performance, especially for children from predetermined “subgroups” due to race, class, native language, and ability (i.e., emotional, social, cognitive, and physical. The call for more deliberate involvement in understanding graduate admissions also arises in regard to student attrition and retention concerns. Faculty often play an under-examined role as gatekeepers throughout the admissions process. The way in which they understand graduate requirements, holistic evaluation, and merit affords opportunities to positively address significant implications for racial equity and diversity in graduate education. To understand faculty reliance upon graduate admissions criteria that undermine espoused university strategic plans, college-level diversity goals, and programmatic decision-making, four professors across the U.S. explore graduate admissions processes and the significance of implementing holistic admissions criteria. We present a holistic graduate admissions conceptual model for school leadership preparation programs to consider when increasing equity and access for minoritized candidates.

  7. Forms of Graduate Capital and Their Relationship to Graduate Employability

    Science.gov (United States)

    Tomlinson, Michael

    2017-01-01

    Purpose: In the context of far-reaching changes in higher education and the labour market, there has been extensive discussion on what constitutes graduate employability and what shapes graduates' labour market outcomes. Many of these discussions are based on skills-centred approaches and related supply-side logic. The purpose of this paper is to…

  8. Graduates' Employability: What Do Graduates and Employers Think?

    Science.gov (United States)

    Matsouka, Kyriaki; Mihail, Dimitrios M.

    2016-01-01

    The purpose of this article is to investigate the views of university graduates and human resource managers (HRMs) on graduates' employability in terms of the soft skills required by the labour market. Soft skills (personal attributes that enhance an individual's interactions, job performance and career prospects) are necessary in the labour…

  9. Learning Axure RP interactive prototypes

    CERN Document Server

    Krahenbuhl, John Henry

    2015-01-01

    If you are a user experience professional, designer, information architect, or business analyst who wants to gain interactive prototyping skills with Axure, then this book is ideal for you. Some familiarity with Axure is preferred but not essential.

  10. Architectural Prototyping in Industrial Practice

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2008-01-01

    Architectural prototyping is the process of using executable code to investigate stakeholders’ software architecture concerns with respect to a system under development. Previous work has established this as a useful and cost-effective way of exploration and learning of the design space of a system......, in addressing issues regarding quality attributes, in addressing architectural risks, and in addressing the problem of knowledge transfer and conformance. Little work has been reported so far on the actual industrial use of architectural prototyping. In this paper, we report from an ethnographical study...... and focus group involving architects from four companies in which we have focused on architectural prototypes. Our findings conclude that architectural prototypes play an important role in resolving problems experimentally, but less so in exploring alternative solutions. Furthermore, architectural...

  11. Experimentation with PEC channel prototype

    International Nuclear Information System (INIS)

    Caponetti, R.; Iacovelli, M.

    1984-01-01

    Experimentation on prototypes of PEC components is presently being carried out at Casaccia CRE. This report shows the results of the first cycle of experimentation of the central channel, concerning the aspects of sodium removal after experimentation

  12. [Preparation of the graduation dissertation at bachelor degree, a fruitful time for acquiring methodological competence: research regarding graduate satisfaction].

    Science.gov (United States)

    Monaco, Rita Ester; Roccu, Mariangela; Pazzaglini, Annarita

    2008-01-01

    To sphere the plan for formative quality improvement a course at bachelor degree, II Faculty of Medicine and Surgery La Sapienza of Rome, Study Center St. John of God FBF, has started a plan hinged various levels. To revisit the regulation of a school regarding DM 3 November 1999 n. 509 and to Dm 22 October 2004 n 270; To specify an evaluation standard a varied typology of the graduation dissertation; To plan a student guide for the drawing up of the graduation dissertation a bachelor degree; To value a graduate's satisfaction. The article explains the plan of a specific evaluation standard, the plan is a student guide drawn up for the graduation dissertation at bachelor degree; and the results of the known research about the graduate 's satisfaction.

  13. Tangiplay: prototyping tangible electronic games

    OpenAIRE

    Boileau, Jason

    2010-01-01

    Tangible electronic games currently exist in research laboratories around the world but have yet to transition to the commercial sector. The development process of a tangible electronic game is one of the factors preventing progression, as it requires much time and money. Prototyping tools for tangible hardware and software development are becoming more available but are targeted to programmers and technically trained developers. Paper prototyping board and video games is a proven and rapid m...

  14. Fast-prototyping of VLSI

    International Nuclear Information System (INIS)

    Saucier, G.; Read, E.

    1987-01-01

    Fast-prototyping will be a reality in the very near future if both straightforward design methods and fast manufacturing facilities are available. This book focuses, first, on the motivation for fast-prototyping. Economic aspects and market considerations are analysed by European and Japanese companies. In the second chapter, new design methods are identified, mainly for full custom circuits. Of course, silicon compilers play a key role and the introduction of artificial intelligence techniques sheds a new light on the subject. At present, fast-prototyping on gate arrays or on standard cells is the most conventional technique and the third chapter updates the state-of-the art in this area. The fourth chapter concentrates specifically on the e-beam direct-writing for submicron IC technologies. In the fifth chapter, a strategic point in fast-prototyping, namely the test problem is addressed. The design for testability and the interface to the test equipment are mandatory to fulfill the test requirement for fast-prototyping. Finally, the last chapter deals with the subject of education when many people complain about the lack of use of fast-prototyping in higher education for VLSI

  15. The graduate as a tool of institutional assessment: an analysis of academic knowledge and employability with FEARP/USP graduates

    Directory of Open Access Journals (Sweden)

    Claudio de Souza Miranda

    2015-02-01

    Full Text Available The assessment process in education has been the target of many studies, including higher education. The assessment process can occur during several levels; this study is done with the graduates. The focus of this study was the Faculty of Economics, Business and Accouting of Ribeirão Preto – USP, in order to answer the following research question: How is the integration of graduate students in the market? The faculty had 17 graduate groups that was composed of 1,520 graduates in its three courses. The researchers were able to connect 1,185, and they obtained 725 answers. Most of the graduates are in the Southeast, especially in São Paulo (84.7%. In terms of post-graduation courses, 32.1% were at MBA courses and 28.1% were at Mastering courses. Regarding employability was observed 91.8% are employed, 5.0% are looking for jobs and only 3.2% are inactive. Among the employed, 80.9% acts at their graduation area. These employees are at public and private sector, and they have an average income of R$ 9,6313. About the graduation course they scored 8.2 out of 10, despite some criticism of undergraduate learning and the market.

  16. Window prototype investigations

    DEFF Research Database (Denmark)

    Jensen, Karsten Ingerslev; Schultz, Jørgen Munthe

    1996-01-01

    Measurement techniques and equipment for measurement of heat loss coefficients and solar energy transmittance both on laboratory level and under real climatic conditions are described as well as the European PASSYS test method....

  17. The Graduation Day

    Institute of Scientific and Technical Information of China (English)

    毛竹晨

    2004-01-01

    It is one of the hottest summer days that Cambridge has ever had.We wereclad(clothe的过去式和过去分词)in the black gown once more.However thiswill probably be my last time to wear it.I had not been wearing it that much af-ter all.After this day,it will be shipped back to my home and lie in my closet,just to be dug out many years later and the sight of it will bring me back to thisvery day.It is our graduation day,the day wher we can add a hood(头巾;兜帽)

  18. Social Origin and Graduation Age

    DEFF Research Database (Denmark)

    Klausen, Trond Beldo

    2016-01-01

    This paper investigates whether social origin has an impact on graduation age among university students. A large number of social background factors are applied on a large data set of 4 successive cohorts of Danish university graduates born 1960–1975. These are cohorts for whom university...

  19. Graduates' Perceptions towards UKM's Infrastructure

    Science.gov (United States)

    Omar, Ramli; Khoon, Koh Aik; Hamzah, Mohd Fauzi; Ahmadan, Siti Rohayu

    2009-01-01

    This paper reports on the surveys which were conducted between 2006 and 2008 on graduates' perceptions towards the infrastructure at Universiti Kebangsaan Malaysia (UKM). It covered three major aspects pertaining to learning, living and leisure on campus. Eight out of 14 components received overwhelming approval from our graduates. (Contains 1…

  20. The Contribution of Graduation Research to School Development: Graduation Research as a Boundary Practice

    Science.gov (United States)

    Snoek, Marco; Bekebrede, Judith; Hanna, Fadie; Creton, Theun; Edzes, Hester

    2017-01-01

    When teaching is considered as a collaborative activity, the aim of research projects in schools needs to exceed the individual and personal levels and aim to contribute to research-informed reflection of a team of teachers. Within this multiple case study, we adapted the graduation research project within a primary teacher education programme,…

  1. Antecedent Factors Affecting Academic Performance of Graduate Students at the Nairobi Evangelical Graduate School of Theology

    Science.gov (United States)

    Mbogo, Rosemary Wahu

    2016-01-01

    This paper reports the findings of a Master's level thesis work that was done in 1997 to assess the antecedent factors affecting the academic performance of graduate students at the Nairobi Evangelical School of Theology (N.E.G.S.T.), which is currently Africa International University (AIU). The paper reviews the effect of lack of finance on…

  2. ECCE Toolkit: Prototyping Sensor-Based Interaction

    Directory of Open Access Journals (Sweden)

    Andrea Bellucci

    2017-02-01

    Full Text Available Building and exploring physical user interfaces requires high technical skills and hours of specialized work. The behavior of multiple devices with heterogeneous input/output channels and connectivity has to be programmed in a context where not only the software interface matters, but also the hardware components are critical (e.g., sensors and actuators. Prototyping physical interaction is hindered by the challenges of: (1 programming interactions among physical sensors/actuators and digital interfaces; (2 implementing functionality for different platforms in different programming languages; and (3 building custom electronic-incorporated objects. We present ECCE (Entities, Components, Couplings and Ecosystems, a toolkit for non-programmers that copes with these issues by abstracting from low-level implementations, thus lowering the complexity of prototyping small-scale, sensor-based physical interfaces to support the design process. A user evaluation provides insights and use cases of the kind of applications that can be developed with the toolkit.

  3. Rapid prototyping: An innovative technique in dentistry

    Directory of Open Access Journals (Sweden)

    Shakeba Quadri

    2017-01-01

    Full Text Available Emergence of advanced digital technology has opened up new perspectives for design and production in the field of dentistry. Rapid prototyping (RP is a technique to quickly and automatically construct a three-dimensional (3D model of a part or product using 3D printers or stereolithography machines. RP has various dental applications, such as fabrication of implant surgical guides, zirconia prosthesis and molds for metal castings, maxillofacial prosthesis and frameworks for fixed and removable partial dentures, wax patterns for the dental prosthesis and complete denture. Rapid prototyping presents fascinating opportunities, but the process is difficult as it demands a high level of artistic skill, which means that the dental technicians should be able to work with the models obtained after impression to form a mirror image and achieve good esthetics. This review aims to focus on various RP methods and its application in dentistry.

  4. Harmonizing the prototypes concerning the fast reactors of 4. generation

    International Nuclear Information System (INIS)

    Anon.

    2008-01-01

    In january 2008, an agreement was signed between the Japan Atomic Energy Agency (JAEA), the American Department of Energy (DOE) and the French Atomic Energy Commission, in order to harmonize the projects of the 3 countries for the development of prototypes of sodium-cooled fast reactors. This cooperation concerns the following issues: -) the purpose of the prototypes, -) common set of safety rules, -) technical innovations for reducing construction, operating and maintenance costs, and -) information exchange about the level of power, the type of nuclear fuels and the time schedule of these prototypes. (A.C.)

  5. Assessing outcomes of industrial hygiene graduate education.

    Science.gov (United States)

    Brosseau, Lisa; Fredrickson, Ann

    2009-05-01

    To ensure that industrial hygiene professionals continue to be prepared for current and future trends, it is important to regularly assess the value of their education. Described here are the results of discussions with employers and a mailed survey of graduates. Comparisons are made with past mailed surveys of both groups. Two sets of discussions were held in late 2005 with employers of industrial hygienists and other health and safety professionals. Twenty-eight participants were asked to discuss current and future needs for professionals in their organization and economic sector, their expectations for knowledge and skills when hiring professionals, methods for finding and hiring, and the importance of ABET accreditation. At the same time, a survey was mailed to 71 industrial hygiene students graduating in the last 15 years. Respondents were asked to rank the value of and their proficiency in 42 competencies. Questions also assessed employment experience, certification, the importance of ABET accreditation, and demographic characteristics. There was a lot of agreement between the two stakeholder groups (employers and graduates) about the most important skill and knowledge areas. Most employers identified communicating effectively and exposure assessment among the most important skills, with designing and initiating research as among the least. Hazard recognition, exposure measurement principles, and personal protective equipment were the most highly ranked knowledge areas. Employers discussed the need for good "business skills" such as teamwork, communication, and project management, and the importance of problem-solving skills. Graduates reported that skills in the areas of recognition, evaluation, and control were most valuable in their first jobs and generally reported high levels of proficiency in these skill areas. There was a similar dichotomy in opinions about accreditation within each stakeholder group. The reputation of the academic program was

  6. Graduate studies in instrumentation at the University of Provence

    International Nuclear Information System (INIS)

    Carette, M.; Reynard, C.; Claire, N.; Deschaintres, J. L.; Felts, B.; Lyoussi, A.; Andre, J.; Bertin, D.

    2009-01-01

    The University of Provence instrumentation department offers a high level of graduate and post graduate engineering programs. Its mission is to form technician experts and engineers with a deep knowledge in their discipline: metrology, instrumentation, tests, Research and Development, automatism and industrial process control. The specialty of master on test facilities instrumentation has been developed in collaboration with the French Atomic Energy Commission (CEA) since 2004. This curriculum offers now a specialization in nuclear detection and nuclear instrumentation. More than 80% of the graduates formed by block-release training of master find a job within 6 months

  7. Costs of a medical education: comparison with graduate education in law and business.

    Science.gov (United States)

    Kerr, Jason R; Brown, Jeffrey J

    2006-02-01

    The costs of graduate school education are climbing, particularly within the fields of medicine, law, and business. Data on graduate level tuition, educational debt, and starting salaries for medical school, law school, and business school graduates were collected directly from universities and from a wide range of published reports and surveys. Medical school tuition and educational debt levels have risen faster than the rate of inflation over the past decade. Medical school graduates have longer training periods and lower starting salaries than law school and business school graduates, although physician salaries rise after completion of post-graduate education. Faced with an early debt burden and delayed entry into the work force, careful planning is required for medical school graduates to pay off their loans and save for retirement.

  8. A new approach in measuring graduate employability skills

    Science.gov (United States)

    Zakaria, Mohd Hafiz; Yatim, Bidin; Ismail, Suzilah

    2014-06-01

    Globalization makes graduate recruitment for an organization becomes more complex because employers believe that a holistic workforce is the key success of an organization. Currently, although graduates are said to possess specific skills but they still lack of employability skills, and this lead to increment of training cost either by government or even employers. Therefore, graduate level of employability skills should be evaluated before entering work market. In this study, a valid and reliable instrument embedding a new approach of measuring employability skills was developed using Situational Judgment Test (SJT). The instrument comprises of twelve (12) items measuring communication skill, professional ethics and morality, entrepreneurial skill, critical thinking in problem solving and personal quality. Instrument's validity was achieved through expert opinion and the reliability (in terms of stability) was based on the Chi-Square for homogeneity test. Generally, the instrument is beneficial to graduates, employers, government agencies, university, and workforce recruitment agencies when evaluating the level of employability skills.

  9. Educational trajectories of graduate students in physics education research

    Science.gov (United States)

    Van Dusen, Ben; Barthelemy, Ramón S.; Henderson, Charles

    2014-12-01

    Physics education research (PER) is a rapidly growing area of PhD specialization. In this article we examine the trajectories that led respondents into a PER graduate program as well as their expected future trajectories. Data were collected in the form of an online survey sent to graduate students in PER. Our findings show a lack of visibility of PER as a field of study, a dominance of work at the undergraduate level, and a mismatch of future desires and expectations. We suggest that greater exposure is needed so PER is known as a field of inquiry for graduates, that more emphasis should be placed on research beyond the undergraduate level, and that there needs to be stronger communication to graduate students about potential careers.

  10. Towards the Efficient Creation of Accurate and High-Performance Virtual Prototypes

    OpenAIRE

    Hufnagel, Simon

    2014-01-01

    As the complexity of embedded systems continuously rises, their development becomes more and more challenging. One technique to cope with this complexity is the employment of virtual prototypes. The virtual prototypes are intended to represent the embedded system’s properties on different levels of detail like register transfer level or transaction level. Virtual prototypes can be used for different tasks throughout the development process. They can act as executable specification, can be use...

  11. Prototypes in engineering design: Definitions and strategies

    DEFF Research Database (Denmark)

    Jensen, Lasse Skovgaard; Özkil, Ali Gürcan; Mortensen, Niels Henrik

    2016-01-01

    By reviewing literature, we investigate types, purposes and definitions of prototypes. There is no overarching definition of a prototype, but we identify five categories of prototypes in litterature. We further synthesize and reference previous work to create an overview of aspects in prototyping...

  12. Prototyping in theory and in practice

    DEFF Research Database (Denmark)

    Yu, Fei; Brem, Alexander; Pasinell, Michele

    2018-01-01

    and functions of a prototype and needed to meet specific goals in order to push the process forward. Designers, on the other hand, used prototypes to investigate the design space for new possibilities, and were more open to a variety of prototyping materials and tools, especially for low-fidelity prototypes...

  13. Rapid Prototyping of Formally Modelled Distributed Systems

    OpenAIRE

    Buchs, Didier; Buffo, Mathieu; Titsworth, Frances M.

    1999-01-01

    This paper presents various kinds of prototypes, used in the prototyping of formally modelled distributed systems. It presents the notions of prototyping techniques and prototype evolution, and shows how to relate them to the software life-cycle. It is illustrated through the use of the formal modelling language for distributed systems CO-OPN/2.

  14. Towards an Operational Framework for Architectural Prototyping

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak

    2005-01-01

    We use a case study in architectural prototyping as input for presenting a first, tentative, framework describing key concepts and their relationships in architectural prototyping processes.......We use a case study in architectural prototyping as input for presenting a first, tentative, framework describing key concepts and their relationships in architectural prototyping processes....

  15. Pancultural nostalgia: prototypical conceptions across cultures.

    Science.gov (United States)

    Hepper, Erica G; Wildschut, Tim; Sedikides, Constantine; Ritchie, Timothy D; Yung, Yiu-Fai; Hansen, Nina; Abakoumkin, Georgios; Arikan, Gizem; Cisek, Sylwia Z; Demassosso, Didier B; Gebauer, Jochen E; Gerber, J P; González, Roberto; Kusumi, Takashi; Misra, Girishwar; Rusu, Mihaela; Ryan, Oisín; Stephan, Elena; Vingerhoets, Ad J J; Zhou, Xinyue

    2014-08-01

    Nostalgia is a frequently experienced complex emotion, understood by laypersons in the United Kingdom and United States of America to (a) refer prototypically to fond, self-relevant, social memories and (b) be more pleasant (e.g., happy, warm) than unpleasant (e.g., sad, regretful). This research examined whether people across cultures conceive of nostalgia in the same way. Students in 18 countries across 5 continents (N = 1,704) rated the prototypicality of 35 features of nostalgia. The samples showed high levels of agreement on the rank-order of features. In all countries, participants rated previously identified central (vs. peripheral) features as more prototypical of nostalgia, and showed greater interindividual agreement regarding central (vs. peripheral) features. Cluster analyses revealed subtle variation among groups of countries with respect to the strength of these pancultural patterns. All except African countries manifested the same factor structure of nostalgia features. Additional exemplars generated by participants in an open-ended format did not entail elaboration of the existing set of 35 features. Findings identified key points of cross-cultural agreement regarding conceptions of nostalgia, supporting the notion that nostalgia is a pancultural emotion.

  16. Engineering prototypes for theta-pinch devices

    International Nuclear Information System (INIS)

    Hansborough, L.D.; Hammer, C.F.; Hanks, K.W.; McDonald, T.E.; Nunnally, W.C.

    1975-01-01

    Past, present, and future engineering prototypes for theta-pinch plasma-physics devices at Los Alamos Scientific Laboratory are discussed. Engineering prototypes are designed to test and evaluate all components under system conditions expected on actual plasma-physics experimental devices. The importance of engineering prototype development increases as the size and complexity of the plasma-physics device increases. Past experiences with the Scyllac prototype and the Staged Theta-Pinch prototype are discussed and evaluated. The design of the proposed Staged Scyllac prototype and the Large Staged Scyllac implosion prototype assembly are discussed

  17. Science with the ASTRI prototype

    International Nuclear Information System (INIS)

    Sartore, Nicola

    2013-01-01

    ASTRI (Astrofisica a Specchi con Tecnologia Replicante Italiana) is a “Flagship Project” financed by the Italian Ministry of Instruction, University and Research and led by the Italian National Institute of Astrophysics. It represents the Italian proposal for the development of the Small Size Telescope system of the Cherenkov Telescope Array, the next generation observatory for Very High Energy gamma-rays (20 GeV - 100 TeV). The ASTRI end-to-end prototype will be installed at Serra La Nave (Catania, Italy) and it will see the first light at the beginning of 2014. We describe the expected performance of the prototype on few selected test cases of the northern emisphere. The aim of the prototype is to probe the technological solutions and the nominal performance of the various telescope's subsystems

  18. Flight Telerobotic Servicer prototype simulator

    Science.gov (United States)

    Schein, Rob; Krauze, Linda; Hartley, Craig; Dickenson, Alan; Lavecchia, Tom; Working, Bob

    A prototype simulator for the Flight Telerobotic Servicer (FTS) system is described for use in the design development of the FTS, emphasizing the hand controller and user interface. The simulator utilizes a graphics workstation based on rapid prototyping tools for systems analyses of the use of the user interface and the hand controller. Kinematic modeling, manipulator-control algorithms, and communications programs are contained in the software for the simulator. The hardwired FTS panels and operator interface for use on the STS Orbiter are represented graphically, and the simulated controls function as the final FTS system configuration does. The robotic arm moves based on the user hand-controller interface, and the joint angles and other data are given on the prototype of the user interface. This graphics simulation tool provides the means for familiarizing crewmembers with the FTS system operation, displays, and controls.

  19. Characterization of Prototype LSST CCDs

    Energy Technology Data Exchange (ETDEWEB)

    OCONNOR,P.; FRANK, J.; GEARY, J.C.; GILMORE, D.K.; KOTOV, I.; RADEKA, V.; TAKACS, P.; TYSON, J.A.

    2008-06-23

    The ambitious science goals of the Large Synoptic Survey Telescope (LSST) will be achieved in part by a wide-field imager that will achieve a new level of performance in terms of area, speed, and sensitivity. The instrument performance is dominated by the focal plane sensors, which are now in development. These new-generation sensors will make use of advanced semiconductor technology and will be complemented by a highly integrated electronics package located inside the cryostat. A test laboratory has been set up at Brookhaven National Laboratory (BNL) to characterize prototype sensors and to develop test and assembly techniques for eventual integration of production sensors and electronics into modules that will form the final focal plane. As described in [1], the key requirements for LSST sensors are wideband quantum efficiency (QE) extending beyond lpm in the red, control of point spread function (PSF), and fast readout using multiple amplifiers per chip operated in parallel. In addition, LSST's fast optical system (f71.25) places severe constraints on focal plane flatness. At the chip level this involves packaging techniques to minimize warpage of the silicon die, and at the mosaic level careful assembly and metrology to achieve a high coplanarity of the sensor tiles. In view of the long lead time to develop the needed sensor technology, LSST undertook a study program with several vendors to fabricate and test devices which address the most critical performance features [2]. The remainder of this paper presents key results of this study program. Section 2 summarizes the sensor requirements and the results of design optimization studies, and Section 3 presents the sensor development plan. In Section 4 we describe the test bench at BNL. Section 5 reports measurement results obtained to date oh devices fabricated by several vendors. Section 6 presents a summary of the paper and an outlook for the future work. We present characterization methods and results on

  20. Axure RP 6 Prototyping Essentials

    CERN Document Server

    Schwartz, Ezra

    2012-01-01

    Axure RP 6 Prototyping Essentials is a detailed, practical primer on the leading rapid prototyping tool. Short on jargon and high on concepts, real-life scenarios and step-by-step guidance through hands-on examples, this book will show you how to integrate Axure into your UX workflow. This book is written for UX practitioners, business analysts, product managers, and anyone else who is involved in UX projects. The book assumes that you have no or very little familiarity with Axure. It will help you if you are evaluating the tool for an upcoming project or are required to quickly get up to spee

  1. Mental health workers. Graduation daze.

    Science.gov (United States)

    Lewis, Carol

    2003-09-11

    PCTs are likely to miss the national target on employment of graduate mental health workers. Pilots are showing success in reducing referrals. Managers must address career progression problems and define roles more clearly.

  2. Graduate Courses in Argumentation Theory.

    Science.gov (United States)

    Benoit, William L.; Follert, Vincent F.

    1986-01-01

    Reports results of a survey of graduate courses in argumentation theory. Includes data on types of courses, theorists, historical and basic concepts in argument, everyday argument, resources (books and articles), etc. (PD)

  3. Graduate School and Fellowship Discussion

    Energy Technology Data Exchange (ETDEWEB)

    Farrar, Charles Reed [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-07-25

    This was a presentation presented for the Los Alamos Dynamics Summer School. This is a set of slides about how to prepare for college, specifically graduate school. It gives instructions for succeeding and getting into a good school with financial aid through assistantships and scholarships, specifically applying to engineering backgrounds. Also, there are tips given for applying for fellowships and concludes with some general recommendations for graduate school.

  4. NMS Prototype development final report

    International Nuclear Information System (INIS)

    Lepetich, J.E.

    1993-01-01

    Program for development of NMS prototype for LAMPF consisted of 5 tasks: crystal procurement specification, inspection/evaluation of CsI crystals, design/fabrication of crystal housing, design/fabrication of PMT shields, and packaging of crystals in the housing

  5. EUSO-TA prototype telescope

    Energy Technology Data Exchange (ETDEWEB)

    Bisconti, Francesca, E-mail: francesca.bisconti@kit.edu

    2016-07-11

    EUSO-TA is one of the prototypes developed for the JEM-EUSO project, a space-based large field-of-view telescope to observe the fluorescence light emitted by cosmic ray air showers in the atmosphere. EUSO-TA is a ground-based prototype located at the Telescope Array (TA) site in Utah, USA, where an Electron Light Source and a Central Laser Facility are installed. The purpose of the EUSO-TA project is to calibrate the prototype with the TA fluorescence detector in presence of well-known light sources and cosmic ray air showers. In 2015, the detector started the first measurements and tests using the mentioned light sources have been performed successfully. A first cosmic ray candidate has been observed, as well as stars of different magnitude and color index. Since Silicon Photo-Multipliers (SiPMs) are very promising for fluorescence telescopes of next generation, they are under consideration for the realization of a new prototype of EUSO Photo Detector Module (PDM). The response of this sensor type is under investigation through simulations and laboratory experimentation.

  6. The OPAL vertex detector prototype

    International Nuclear Information System (INIS)

    Roney, J.M.; Armitage, J.C.; Carnegie, R.K.; Giles, G.L.; Hemingway, R.J.; McPherson, A.C.; Pinfold, J.L.; Waterhouse, J.; Godfrey, L.; Hargrove, C.K.

    1989-01-01

    The prototype test results of a high resolution charged particle tracking detector are reported. The detector is designed to measure vertex topologies of particles produced in the e + e - collisions of the OPAL experiment at LEP. The OPAL vertex detector is a 1 m long, 0.46 m diameter cylindrical drift chamber consisting of an axial and stereo layer each of which is divided into 36 jet cells. A prototype chamber containing four axial and two stereo cells was studied using a pion test beam at CERN. The studies examined the prototype under a variety of operating conditions. An r-Φ resolution of 60 μm was obtained when the chamber was operated with argon (50%)-ethane (50%) at 3.75 bar, and when CO 2 (80%)-isobutane (20%) at 2.5 bar was used a 25 μm resolution was achieved. A z measurement using end-to-end time difference has a resolution of 3.5 cm. The details of these prototype studies are discussed in this paper. (orig.)

  7. Rapid Prototyping Enters Mainstream Manufacturing.

    Science.gov (United States)

    Winek, Gary

    1996-01-01

    Explains rapid prototyping, a process that uses computer-assisted design files to create a three-dimensional object automatically, speeding the industrial design process. Five commercially available systems and two emerging types--the 3-D printing process and repetitive masking and depositing--are described. (SK)

  8. Encapsulation of polymer photovoltaic prototypes

    DEFF Research Database (Denmark)

    Krebs, Frederik C

    2006-01-01

    A simple and efficient method for the encapsulation of polymer and organic photovoltaic prototypes is presented. The method employs device preparation on glass substrates with subsequent sealing using glass fiber reinforced thermosetting epoxy (prepreg) against a back plate. The method allows...

  9. EUSO-TA prototype telescope

    Science.gov (United States)

    Bisconti, Francesca; JEM-EUSO Collaboration

    2016-07-01

    EUSO-TA is one of the prototypes developed for the JEM-EUSO project, a space-based large field-of-view telescope to observe the fluorescence light emitted by cosmic ray air showers in the atmosphere. EUSO-TA is a ground-based prototype located at the Telescope Array (TA) site in Utah, USA, where an Electron Light Source and a Central Laser Facility are installed. The purpose of the EUSO-TA project is to calibrate the prototype with the TA fluorescence detector in presence of well-known light sources and cosmic ray air showers. In 2015, the detector started the first measurements and tests using the mentioned light sources have been performed successfully. A first cosmic ray candidate has been observed, as well as stars of different magnitude and color index. Since Silicon Photo-Multipliers (SiPMs) are very promising for fluorescence telescopes of next generation, they are under consideration for the realization of a new prototype of EUSO Photo Detector Module (PDM). The response of this sensor type is under investigation through simulations and laboratory experimentation.

  10. Facial Prototype Formation in Children.

    Science.gov (United States)

    Inn, Donald; And Others

    This study examined memory representation as it is exhibited in young children's formation of facial prototypes. In the first part of the study, researchers constructed images of faces using an Identikit that provided the features of hair, eyes, mouth, nose, and chin. Images were varied systematically. A series of these images, called exemplar…

  11. Prototype diagnosis of psychiatric syndromes

    Science.gov (United States)

    WESTEN, DREW

    2012-01-01

    The method of diagnosing patients used since the early 1980s in psychiatry, which involves evaluating each of several hundred symptoms for their presence or absence and then applying idiosyncratic rules for combining them for each of several hundred disorders, has led to great advances in research over the last 30 years. However, its problems have become increasingly apparent, particularly for clinical practice. An alternative approach, designed to maximize clinical utility, is prototype matching. Instead of counting symptoms of a disorder and determining whether they cross an arbitrary cutoff, the task of the diagnostician is to gauge the extent to which a patient’s clinical presentation matches a paragraph-length description of the disorder using a simple 5-point scale, from 1 (“little or no match”) to 5 (“very good match”). The result is both a dimensional diagnosis that captures the extent to which the patient “has” the disorder and a categorical diagnosis, with ratings of 4 and 5 corresponding to presence of the disorder and a rating of 3 indicating “subthreshold” or “clinically significant features”. The disorders and criteria woven into the prototypes can be identified empirically, so that the prototypes are both scientifically grounded and clinically useful. Prototype diagnosis has a number of advantages: it better captures the way humans naturally classify novel and complex stimuli; is clinically helpful, reliable, and easy to use in everyday practice; facilitates both dimensional and categorical diagnosis and dramatically reduces the number of categories required for classification; allows for clinically richer, empirically derived, and culturally relevant classification; reduces the gap between research criteria and clinical knowledge, by allowing clinicians in training to learn a small set of standardized prototypes and to develop richer mental representations of the disorders over time through clinical experience; and can help

  12. Prototype Effect and the Persuasiveness of Generalizations.

    Science.gov (United States)

    Dahlman, Christian; Sarwar, Farhan; Bååth, Rasmus; Wahlberg, Lena; Sikström, Sverker

    An argument that makes use of a generalization activates the prototype for the category used in the generalization. We conducted two experiments that investigated how the activation of the prototype affects the persuasiveness of the argument. The results of the experiments suggest that the features of the prototype overshadow and partly overwrite the actual facts of the case. The case is, to some extent, judged as if it had the features of the prototype instead of the features it actually has. This prototype effect increases the persuasiveness of the argument in situations where the audience finds the judgment more warranted for the prototype than for the actual case (positive prototype effect), but decreases persuasiveness in situations where the audience finds the judgment less warranted for the prototype than for the actual case (negative prototype effect).

  13. Supporting Active User Involvment in Prototyping

    DEFF Research Database (Denmark)

    Grønbæk, Kaj

    1990-01-01

    The term prototyping has in recent years become a buzzword in both research and practice of system design due to a number of claimed advantages of prototyping techniques over traditional specification techniques. In particular it is often stated that prototyping facilitates the users' involvement...... in the development process. But prototyping does not automatically imply active user involvement! Thus a cooperative prototyping approach aiming at involving users actively and creatively in system design is proposed in this paper. The key point of the approach is to involve users in activities that closely couple...... development of prototypes to early evaluation of prototypes in envisioned use situations. Having users involved in such activities creates new requirements for tool support. Tools that support direct manipulation of prototypes and simulation of behaviour have shown promise for cooperative prototyping...

  14. Prototyping of user interfaces for mobile applications

    CERN Document Server

    Bähr, Benjamin

    2017-01-01

    This book investigates processes for the prototyping of user interfaces for mobile apps, and describes the development of new concepts and tools that can improve the prototype driven app development in the early stages. It presents the development and evaluation of a new requirements catalogue for prototyping mobile app tools that identifies the most important criteria such tools should meet at different prototype-development stages. This catalogue is not just a good point of orientation for designing new prototyping approaches, but also provides a set of metrics for a comparing the performance of alternative prototyping tools. In addition, the book discusses the development of Blended Prototyping, a new approach for prototyping user interfaces for mobile applications in the early and middle development stages, and presents the results of an evaluation of its performance, showing that it provides a tool for teamwork-oriented, creative prototyping of mobile apps in the early design stages.

  15. Graduate Study in Psychology, 2013 Edition

    Science.gov (United States)

    APA Books, 2012

    2012-01-01

    "Graduate Study in Psychology" is the best source of information related to graduate programs in psychology and provides information related to approximately 600 graduate programs in psychology in the U.S. and Canada. "Graduate Study in Psychology" contains information about: (1) number of applications received by a program;…

  16. Design in action: From prototyping by demonstration to cooperative prototyping

    DEFF Research Database (Denmark)

    Bødker, Susanne; Grønbæk, Kaj

    1991-01-01

    ... the development of any computer-based system will have to proceed in a cycle from design to experience and back again. It is impossible to anticipate all of the relevant breakdown and their domains. They emerge gradually in practice. Winograd and Flores, 1986. p.171 Some time ago we worked wi...... with a group of dental assistants, designing a prototype case record system to explore the possibility of using computer support in public dental clinics. ...

  17. Evaluation of a community transition to professional practice program for graduate registered nurses in Australia.

    Science.gov (United States)

    Aggar, Christina; Gordon, Christopher J; Thomas, Tamsin H T; Wadsworth, Linda; Bloomfield, Jacqueline

    2018-03-26

    Australia has an increasing demand for a sustainable primary health care registered nursing workforce. Targeting graduate registered nurses who typically begin their nursing career in acute-care hospital settings is a potential workforce development strategy. We evaluated a graduate registered nurse Community Transition to Professional Practice Program which was designed specifically to develop and foster skills required for primary health care. The aims of this study were to evaluate graduates' intention to remain in the primary health care nursing workforce, and graduate competency, confidence and experiences of program support; these were compared with graduates undertaking the conventional acute-care transition program. Preceptor ratings of graduate competence were also measured. All of the 25 graduates (n = 12 community, n = 13 acute-care) who completed the questionnaire at 6 and 12 months intended to remain in nursing, and 55% (n = 6) of graduates in the Community Transition Program intended to remain in the primary health care nursing workforce. There were no differences in graduate experiences, including level of competence, or preceptors' perceptions of graduate competence, between acute-care and Community Transition Programs. The Community Transition to Professional Practice program represents a substantial step towards developing the primary health care health workforce by facilitating graduate nurse employment in this area. Copyright © 2018 Elsevier Ltd. All rights reserved.

  18. Fluid mechanics for engineers. A graduate textbook

    Energy Technology Data Exchange (ETDEWEB)

    Schobeiri, Meinhard T. [Texas A and M Univ., College Station, TX (United States). Dept. of Mechanical Engineering

    2010-07-01

    The contents of this book covers the material required in the Fluid Mechanics Graduate Core Course (MEEN-621) and in Advanced Fluid Mechanics, a Ph.D-level elective course (MEEN-622), both of which I have been teaching at Texas A and M University for the past two decades. While there are numerous undergraduate fluid mechanics texts on the market for engineering students and instructors to choose from, there are only limited texts that comprehensively address the particular needs of graduate engineering fluid mechanics courses. To complement the lecture materials, the instructors more often recommend several texts, each of which treats special topics of fluid mechanics. This circumstance and the need to have a textbook that covers the materials needed in the above courses gave the impetus to provide the graduate engineering community with a coherent textbook that comprehensively addresses their needs for an advanced fluid mechanics text. Although this text book is primarily aimed at mechanical engineering students, it is equally suitable for aerospace engineering, civil engineering, other engineering disciplines, and especially those practicing professionals who perform CFD-simulation on a routine basis and would like to know more about the underlying physics of the commercial codes they use. Furthermore, it is suitable for self study, provided that the reader has a sufficient knowledge of calculus and differential equations. (orig.)

  19. Who gets a job after graduation? Factors affecting the early career employment chances of higher education graduates in Poland

    Directory of Open Access Journals (Sweden)

    Mikołaj Jasiński

    2017-12-01

    Full Text Available The massification of higher education in Poland means that many students choose this educational pathway to improve their chances for a good job. Therefore, the labour market outcomes of graduates provide an important perspective for future students, higher education institutions, as well as decision makers at the national level. The Polish Graduate Tracking System (ELA, based on administrative data, is designed to monitor graduates’ outcomes in the labour market by type of studies, higher education institution, as well as individual curricula. Results of the first two years of graduate tracking show that the outcomes vary by study area, but also change over time. While in the first months after graduation, aspects such as prior experience in the labour market and place of residence have a substantial effect on employment chances, in the longer run, they lose their importance relative to other factors.

  20. Expectations of Competency: The Mismatch between Employers' and Graduates' Views of End-User Computing Skills Requirements in the Workplace

    Science.gov (United States)

    Gibbs, Shirley; Steel, Gary; Kuiper, Alison

    2011-01-01

    The use of computers has become part of everyday life. The high prevalence of computer use appears to lead employers to assume that university graduates will have the good computing skills necessary in many graduate level jobs. This study investigates how well the expectations of employers match the perceptions of near-graduate students about the…

  1. Function-oriented display system: background and first prototypes

    International Nuclear Information System (INIS)

    Andresen, Gisle; Friberg, Maarten; Teigen, Arild; Pirus, Dominique

    2004-04-01

    The objective of the function-oriented displays and alarm project is to design, implement and evaluate Human System Interfaces (HSI) based on a function-oriented design philosophy. Function-oriented design is an approach for designing HSIs where the plant's functions, identified through a function analysis, are used for determining the content, organisation, and management of displays. The project has used the 'FITNESS approach', originally developed by EDF in France, as a starting point. FITNESS provides an integrated display system consisting of process operating displays, operating procedures, alarms and trend displays - all based on a functional decomposition of the plant. So far, two prototypes have been implemented on the FRESH PWR simulator in HAMMLAB. The first prototype focused on the condensate pumps. Three process operating displays representing functions at different levels of the functional hierarchy were implemented. Computerised startup and shutdown procedures for the condensate pumps function were also implemented. In the second prototype, the scope was increased to cover the main feedwater system. The displays of the first prototype were redesigned and additional displays were created. In conclusion, the first phase of the project has been completed successfully, and we are now ready to enter the second phase. In the second phase, the scope of the prototype will be increased further to include the steam-generators and function-oriented disturbance operating procedures. The prototype will be evaluated in a user test conducted later in 2004. (Author)

  2. Prototype of sun projector device

    Science.gov (United States)

    Ihsan; Dermawan, B.

    2016-11-01

    One way to introduce astronomy to public, including students, can be handled by solar observation. The widely held device for this purpose is coelostat and heliostat. Besides using filter attached to a device such as telescope, it is safest to use indirect way for observing the Sun. The main principle of the indirect way is deflecting the sun light and projecting image of the sun on a screen. We design and build a simple and low-cost astronomical device, serving as a supplement to increase public service, especially for solar observation. Without using any digital and intricate supporting equipment, people can watch and relish image of the Sun in comfortable condition, i.e. in a sheltered or shady place. Here we describe a design and features of our prototype of the device, which still, of course, has some limitations. In the future, this prototype can be improved for more efficient and useful applications.

  3. Prototype and proposed ISABELLE dipoles

    International Nuclear Information System (INIS)

    McInturff, A.D.; Sampson, W.B.; Robins, K.E.; Dahl, P.F.; Damm, R.

    1977-01-01

    Data are presented on the latest dipole prototypes to update the operational parameters possible for ISABELLE. This data base will constantly expand until the start of construction of the storage rings. The data will include field quality, stray field magnitudes, quench temperature and propagation times, protection capabilities singly and in multiple units, maximum central fields obtained and training behavior. Performance of the dipoles versus temperature and mode of refrigeration will be discussed. The single layer cosine theta turns distribution coils' parameters are better than those required for the operation of the 200 x 200 GeV version of ISABELLE. The double layer prototype has exceeded the magnetic field performance and two dimensional quality of field needed for the 400 x 400 GeV version of ISABELLE

  4. Rapid mask prototyping for microfluidics.

    Science.gov (United States)

    Maisonneuve, B G C; Honegger, T; Cordeiro, J; Lecarme, O; Thiry, T; Fuard, D; Berton, K; Picard, E; Zelsmann, M; Peyrade, D

    2016-03-01

    With the rise of microfluidics for the past decade, there has come an ever more pressing need for a low-cost and rapid prototyping technology, especially for research and education purposes. In this article, we report a rapid prototyping process of chromed masks for various microfluidic applications. The process takes place out of a clean room, uses a commercially available video-projector, and can be completed in less than half an hour. We quantify the ranges of fields of view and of resolutions accessible through this video-projection system and report the fabrication of critical microfluidic components (junctions, straight channels, and curved channels). To exemplify the process, three common devices are produced using this method: a droplet generation device, a gradient generation device, and a neuro-engineering oriented device. The neuro-engineering oriented device is a compartmentalized microfluidic chip, and therefore, required the production and the precise alignment of two different masks.

  5. Prototyping the PANDA Barrel DIRC

    Energy Technology Data Exchange (ETDEWEB)

    Schwarz, C., E-mail: C.Schwarz@gsi.de [GSI Helmholtzzentrum für Schwerionenforschung GmbH, Darmstadt (Germany); Kalicy, G.; Dzhygadlo, R.; Gerhardt, A.; Götzen, K.; Hohler, R.; Kumawat, H.; Lehmann, D.; Lewandowski, B.; Patsyuk, M.; Peters, K.; Schepers, G.; Schmitt, L.; Schwiening, J.; Traxler, M.; Zühlsdorf, M. [GSI Helmholtzzentrum für Schwerionenforschung GmbH, Darmstadt (Germany); Dodokhov, V.Kh. [Joint Institute for Nuclear Research, Dubna (Russian Federation); Britting, A.; Eyrich, W.; Lehmann, A. [Friedrich Alexander-University of Erlangen-Nuremberg, Erlangen (Germany); and others

    2014-12-01

    The design of the Barrel DIRC detector for the future PANDA experiment at FAIR contains several important improvements compared to the successful BABAR DIRC, such as focusing and fast timing. To test those improvements as well as other design options a prototype was build and successfully tested in 2012 with particle beams at CERN. The prototype comprises a radiator bar, focusing lens, mirror, and a prism shaped expansion volume made of synthetic fused silica. An array of micro-channel plate photomultiplier tubes measures the location and arrival time of the Cherenkov photons with sub-nanosecond resolution. The development of a fast reconstruction algorithm allowed to tune construction details of the detector setup with test beam data and Monte-Carlo simulations.

  6. Customer-experienced rapid prototyping

    Science.gov (United States)

    Zhang, Lijuan; Zhang, Fu; Li, Anbo

    2008-12-01

    In order to describe accurately and comprehend quickly the perfect GIS requirements, this article will integrate the ideas of QFD (Quality Function Deployment) and UML (Unified Modeling Language), and analyze the deficiency of prototype development model, and will propose the idea of the Customer-Experienced Rapid Prototyping (CE-RP) and describe in detail the process and framework of the CE-RP, from the angle of the characteristics of Modern-GIS. The CE-RP is mainly composed of Customer Tool-Sets (CTS), Developer Tool-Sets (DTS) and Barrier-Free Semantic Interpreter (BF-SI) and performed by two roles of customer and developer. The main purpose of the CE-RP is to produce the unified and authorized requirements data models between customer and software developer.

  7. Expectations of Graduate Communication Skills in Professional Veterinary Practice.

    Science.gov (United States)

    Haldane, Sarah; Hinchcliff, Kenneth; Mansell, Peter; Baik, Chi

    Good communication skills are an important entry-level attribute of graduates of professional degrees. The inclusion of communication training within the curriculum can be problematic, particularly in programs with a high content load, such as veterinary science. This study examined the differences between the perceptions of students and qualified veterinarians with regards to the entry-level communication skills required of new graduates in clinical practice. Surveys were distributed to students in each of the four year levels of the veterinary science degree at the University of Melbourne and to recent graduates and experienced veterinarians registered in Victoria, Australia. Respondents were asked to rank the relative importance of six different skill sets: knowledge base; medical and technical skills; surgical skills; verbal communication and interpersonal skills; written communication skills; and critical thinking and problem solving. They were then asked to rate the importance of specific communication skills for new graduate veterinarians. Veterinarians and students ranked verbal communication and interpersonal skills as the most important skill set for an entry-level veterinarian. Veterinarians considered many new graduates to be deficient in these skills. Students often felt they lacked confidence in this area. This has important implications for veterinary educators in terms of managing the expectations of students and improving the delivery of communication skills courses within the veterinary curriculum.

  8. Anxiety and Attitude of Graduate Students in On-Campus vs. Online Statistics Courses

    Science.gov (United States)

    DeVaney, Thomas A.

    2010-01-01

    This study compared levels of statistics anxiety and attitude toward statistics for graduate students in on-campus and online statistics courses. The Survey of Attitudes Toward Statistics and three subscales of the Statistics Anxiety Rating Scale were administered at the beginning and end of graduate level educational statistic courses.…

  9. DOE's annealing prototype demonstration projects

    International Nuclear Information System (INIS)

    Warren, J.; Nakos, J.; Rochau, G.

    1997-01-01

    One of the challenges U.S. utilities face in addressing technical issues associated with the aging of nuclear power plants is the long-term effect of plant operation on reactor pressure vessels (RPVs). As a nuclear plant operates, its RPV is exposed to neutrons. For certain plants, this neutron exposure can cause embrittlement of some of the RPV welds which can shorten the useful life of the RPV. This RPV embrittlement issue has the potential to affect the continued operation of a number of operating U.S. pressurized water reactor (PWR) plants. However, RPV material properties affected by long-term irradiation are recoverable through a thermal annealing treatment of the RPV. Although a dozen Russian-designed RPVs and several U.S. military vessels have been successfully annealed, U.S. utilities have stated that a successful annealing demonstration of a U.S. RPV is a prerequisite for annealing a licensed U.S. nuclear power plant. In May 1995, the Department of Energy's Sandia National Laboratories awarded two cost-shared contracts to evaluate the feasibility of annealing U.S. licensed plants by conducting an anneal of an installed RPV using two different heating technologies. The contracts were awarded to the American Society of Mechanical Engineers (ASME) Center for Research and Technology Development (CRTD) and MPR Associates (MPR). The ASME team completed its annealing prototype demonstration in July 1996, using an indirect gas furnace at the uncompleted Public Service of Indiana's Marble Hill nuclear power plant. The MPR team's annealing prototype demonstration was scheduled to be completed in early 1997, using a direct heat electrical furnace at the uncompleted Consumers Power Company's nuclear power plant at Midland, Michigan. This paper describes the Department's annealing prototype demonstration goals and objectives; the tasks, deliverables, and results to date for each annealing prototype demonstration; and the remaining annealing technology challenges

  10. Encapsulation of polymer photovoltaic prototypes

    Energy Technology Data Exchange (ETDEWEB)

    Krebs, Frederik C. [The Danish Polymer Centre, RISOE National Laboratory, P.O. Box 49, DK-4000 Roskilde (Denmark)

    2006-12-15

    A simple and efficient method for the encapsulation of polymer and organic photovoltaic prototypes is presented. The method employs device preparation on glass substrates with subsequent sealing using glass fiber reinforced thermosetting epoxy (prepreg) against a back plate. The method allows for transporting oxygen and water sensitive devices outside a glove box environment after sealing and enables sharing of devices between research groups such that efficiency and stability can be evaluated in different laboratories. (author)

  11. Prototype Morphing Fan Nozzle Demonstrated

    Science.gov (United States)

    Lee, Ho-Jun; Song, Gang-Bing

    2004-01-01

    Ongoing research in NASA Glenn Research Center's Structural Mechanics and Dynamics Branch to develop smart materials technologies for aeropropulsion structural components has resulted in the design of the prototype morphing fan nozzle shown in the photograph. This prototype exploits the potential of smart materials to significantly improve the performance of existing aircraft engines by introducing new inherent capabilities for shape control, vibration damping, noise reduction, health monitoring, and flow manipulation. The novel design employs two different smart materials, a shape-memory alloy and magnetorheological fluids, to reduce the nozzle area by up to 30 percent. The prototype of the variable-area fan nozzle implements an overlapping spring leaf assembly to simplify the initial design and to provide ease of structural control. A single bundle of shape memory alloy wire actuators is used to reduce the nozzle geometry. The nozzle is subsequently held in the reduced-area configuration by using magnetorheological fluid brakes. This prototype uses the inherent advantages of shape memory alloys in providing large induced strains and of magnetorheological fluids in generating large resistive forces. In addition, the spring leaf design also functions as a return spring, once the magnetorheological fluid brakes are released, to help force the shape memory alloy wires to return to their original position. A computerized real-time control system uses the derivative-gain and proportional-gain algorithms to operate the system. This design represents a novel approach to the active control of high-bypass-ratio turbofan engines. Researchers have estimated that such engines will reduce thrust specific fuel consumption by 9 percent over that of fixed-geometry fan nozzles. This research was conducted under a cooperative agreement (NCC3-839) at the University of Akron.

  12. Using prototyping in software development

    OpenAIRE

    Šinkovec, Miha

    2010-01-01

    Today the business system changers faster than the usual conventional cascade life cycle. Because of that, we can conclude, that today's programming system will no longer be presented as the answer to this topic in the developing age of ever changing user requirements. Neither increased performance or higher productivity will decrease the problem. The appropriate solution to this stated problem is prototyping. Instead of building and developing the whole system, we build a module that can...

  13. Spatial Graduation of Fuel Taxes

    Energy Technology Data Exchange (ETDEWEB)

    Rietveld, P.; Van Vuuren, D. [Tinbergen Institute, Labor, Region and Environment, Amsterdam/Rotterdam (Netherlands); Bruinsma, F. [Department of Spatial Economics, Faculty of Economics and Econometrics, Vrije Universiteit Amsterdam, Amsterdam (Netherlands)

    1999-06-01

    Substantial differences exist among fuel taxes in various countries. These differences represent a form of fiscal competition that has undesirable side effects because it leads to cross-border fuelling and hence to extra kilometres driven. One possible way of solving the problem of low fuel taxes in neighbouring countries is to introduce a spatial differentiation of taxes: low near the border and higher further away. This paper contains an empirical analysis of the consequences of such a spatial graduation of fuel taxes for the Netherlands. We will analyse impacts on fuelling behaviour, vehicle kilometres driven, tax receipts, and sales by owners of gas stations. The appropriate slope of the graduation curve is also discussed. Our conclusion is that in a small country such as the Netherlands, a spatial graduation of fuel taxes will lead to substantial changes in fuelling behaviour, even when the graduation curve is not steep. Depending on the graduation profile implemented, the spatial differentiation of fuel tax will give rise to substantial problems for owners of gas stations in areas with decreasing fuel sales. 9 refs.

  14. Spatial Graduation of Fuel Taxes

    International Nuclear Information System (INIS)

    Rietveld, P.; Van Vuuren, D.; Bruinsma, F.

    1999-06-01

    Substantial differences exist among fuel taxes in various countries. These differences represent a form of fiscal competition that has undesirable side effects because it leads to cross-border fuelling and hence to extra kilometres driven. One possible way of solving the problem of low fuel taxes in neighbouring countries is to introduce a spatial differentiation of taxes: low near the border and higher further away. This paper contains an empirical analysis of the consequences of such a spatial graduation of fuel taxes for the Netherlands. We will analyse impacts on fuelling behaviour, vehicle kilometres driven, tax receipts, and sales by owners of gas stations. The appropriate slope of the graduation curve is also discussed. Our conclusion is that in a small country such as the Netherlands, a spatial graduation of fuel taxes will lead to substantial changes in fuelling behaviour, even when the graduation curve is not steep. Depending on the graduation profile implemented, the spatial differentiation of fuel tax will give rise to substantial problems for owners of gas stations in areas with decreasing fuel sales. 9 refs

  15. Iteration and Prototyping in Creating Technical Specifications.

    Science.gov (United States)

    Flynt, John P.

    1994-01-01

    Claims that the development process for computer software can be greatly aided by the writers of specifications if they employ basic iteration and prototyping techniques. Asserts that computer software configuration management practices provide ready models for iteration and prototyping. (HB)

  16. Printing of Titanium implant prototype

    International Nuclear Information System (INIS)

    Wiria, Florencia Edith; Shyan, John Yong Ming; Lim, Poon Nian; Wen, Francis Goh Chung; Yeo, Jin Fei; Cao, Tong

    2010-01-01

    Dental implant plays an important role as a conduit of force and stress to flow from the tooth to the related bone. In the load sharing between an implant and its related bone, the amount of stress carried by each of them directly related to their stiffness or modulus. Hence, it is a crucial issue for the implant to have matching mechanical properties, in particular modulus, between the implant and its related bone. Titanium is a metallic material that has good biocompatibility and corrosion resistance. Whilst the modulus of the bulk material is still higher than that of bone, it is the lowest among all other commonly used metallic implant materials, such as stainless steel or cobalt alloy. Hence it is potential to further reduce the modulus of pure Titanium by engineering its processing method to obtain porous structure. In this project, porous Titanium implant prototype is fabricated using 3-dimensional printing. This technique allows the flexibility of design customization, which is beneficial for implant fabrication as tailoring of implant size and shape helps to ensure the implant would fit nicely to the patient. The fabricated Titanium prototype had a modulus of 4.8-13.2 GPa, which is in the range of natural bone modulus. The compressive strength achieved was between 167 to 455 MPa. Subsequent cell culture study indicated that the porous Titanium prototype had good biocompatibility and is suitable for bone cell attachment and proliferation.

  17. Majorana Thermosyphon Prototype Experimental Results

    International Nuclear Information System (INIS)

    Fast, James E.; Reid, Douglas J.; Aguayo Navarrete, Estanislao

    2010-01-01

    The Majorana demonstrator will operate at liquid Nitrogen temperatures to ensure optimal spectrometric performance of its High Purity Germanium (HPGe) detector modules. In order to transfer the heat load of the detector module, the Majorana demonstrator requires a cooling system that will maintain a stable liquid nitrogen temperature. This cooling system is required to transport the heat from the detector chamber outside the shield. One approach is to use the two phase liquid-gas equilibrium to ensure constant temperature. This cooling technique is used in a thermosyphon. The thermosyphon can be designed so the vaporization/condensing process transfers heat through the shield while maintaining a stable operating temperature. A prototype of such system has been built at PNNL. This document presents the experimental results of the prototype and evaluates the heat transfer performance of the system. The cool down time, temperature gradient in the thermosyphon, and heat transfer analysis are studied in this document with different heat load applied to the prototype.

  18. Using administrative data to estimate graduation rates: Challenges, Proposed solutions and their pitfalls.

    Directory of Open Access Journals (Sweden)

    Joydeep Roy

    2008-06-01

    Full Text Available In recent years there has been a renewed interest in understanding the levels and trends in high school graduation in the U.S. A big and influential literature has argued that the “true” high school graduation rate remains at an unsatisfactory level, and that the graduation rates for minorities (Blacks and Hispanics are alarmingly low. In this paper we take a closer look at the different measures of high school graduation which have recently been proposed and which yield such low estimates of graduation rates. We argue that the nature of the variables in the Common Core of Data, the dataset maintained by the U.S. Department of Education that is the main source for all of the new measures, requires caution in calculating graduation rates, and the adjustments that have been proposed often impart significant downward bias to the estimates.

  19. Readiness for practice: a survey of neurosurgery graduates and program directors.

    Science.gov (United States)

    Haji, Faizal A; Steven, David A

    2014-11-01

    Postgraduate neurosurgical education is undergoing significant reform, including transition to a competency-based training model. To support these efforts, the purpose of this study was to determine neurosurgical graduates' and program directors' (PDs) opinions about graduates' level of competence in reference to the 2010 Royal College Objectives of Training in Neurosurgery. An electronic survey was distributed to Canadian neurosurgery PDs and graduates from 2011. The questionnaire addressed graduates' abilities in nonprocedural knowledge and skills, CanMEDS roles, proficiency with core neurosurgical procedures and knowledge of complex neurosurgical techniques. Thirteen of 22 (59%) graduate and 17/25 (65%) PD surveys were completed. There were no significant differences between PD and graduate responses. Most respondents agreed that these graduates possess the knowledge and skills expected of an independently practicing neurosurgeon across current objectives of training. A small proportion felt some graduates did not achieve this level of proficiency on specific vascular, functional, peripheral nerve and endoscopic procedures. This was partially attributed to limited exposure to these procedures during training and perceptions that some techniques required fellowship-level training. Graduating neurosurgical residents are perceived to possess a high level of proficiency in the majority of neurosurgical practice domains. Inadequate exposure during training or a perception that subspecialists should perform some procedures may contribute to cases where proficiency is not as high. The trends identified in this study could be monitored on an ongoing basis to provide supplemental data to guide curricular decisions in Canadian neurosurgical training.

  20. Prototype effect and the persuasiveness of generalizations

    OpenAIRE

    Dahlman, Christian; Sarwar, Farhan; Bååth, Rasmus; Wahlberg, Lena; Sikström, Sverker

    2015-01-01

    An argument that makes use of a generalization activates the prototype for the category used in the generalization. We conducted two experiments that investigated how the activation of the prototype affects the persuasiveness of the argument. The results of the experiments suggest that the features of the prototype overshadow and partly overwrite the actual facts of the case. The case is, to some extent, judged as if it had the features of the prototype instead of the features it actually ...

  1. Student-Moderated Discussion Boards in a Graduate Online Course

    Science.gov (United States)

    McRay, Jeni; Goertzen, Brent; Klaus, Kaley

    2016-01-01

    This application brief describes a "Module Discussant" activity assigned in an online graduate-level leadership theory course. The assignment was designed to stimulate higher-level thinking, apply leadership theory to practice, and foster extensive communication among students in the online learning environment using a common learning…

  2. Implicit face prototype learning from geometric information.

    Science.gov (United States)

    Or, Charles C-F; Wilson, Hugh R

    2013-04-19

    There is evidence that humans implicitly learn an average or prototype of previously studied faces, as the unseen face prototype is falsely recognized as having been learned (Solso & McCarthy, 1981). Here we investigated the extent and nature of face prototype formation where observers' memory was tested after they studied synthetic faces defined purely in geometric terms in a multidimensional face space. We found a strong prototype effect: The basic results showed that the unseen prototype averaged from the studied faces was falsely identified as learned at a rate of 86.3%, whereas individual studied faces were identified correctly 66.3% of the time and the distractors were incorrectly identified as having been learned only 32.4% of the time. This prototype learning lasted at least 1 week. Face prototype learning occurred even when the studied faces were further from the unseen prototype than the median variation in the population. Prototype memory formation was evident in addition to memory formation of studied face exemplars as demonstrated in our models. Additional studies showed that the prototype effect can be generalized across viewpoints, and head shape and internal features separately contribute to prototype formation. Thus, implicit face prototype extraction in a multidimensional space is a very general aspect of geometric face learning. Copyright © 2013 Elsevier Ltd. All rights reserved.

  3. The Scintillator Tile Hadronic Calorimeter Prototype

    International Nuclear Information System (INIS)

    Rusinov, V.

    2006-01-01

    A high granularity scintillator hadronic calorimeter prototype is described. The calorimeter is based on a novel photodetector - Silicon Photo-Multiplier (SiPM). The main parameters of SiPM are discussed as well as readout cell construction and optimization. The experience with a small prototype production and testing is described. A new 8 k channel prototype is being manufactured now

  4. Rapid Prototyping: An Alternative Instructional Design Strategy.

    Science.gov (United States)

    Tripp, Steven D.; Bichelmeyer, Barbara

    1990-01-01

    Discusses the nature of instructional design and describes rapid prototyping as a feasible model for instructional system design (ISD). The use of prototyping in software engineering is described, similarities between software design and instructional design are discussed, and an example is given which uses rapid prototyping in designing a…

  5. A Re-examination of Online Marketing Strategies for Graduate Recruitment in the Insurance Industry

    OpenAIRE

    Rana, Zain

    2010-01-01

    "Cynics sometimes refer to the insurance industry as boring, old-fashioned and bureaucratic. What can Zurich do to challenge such misconceptions and better market themselves to potential graduate applicants?” In recent times, there has been a noticeable shortfall in graduate level applications to insurance firms. The industry is now facing problems of an ageing workforce and are undergoing difficulty attracting graduates, as compared to other industry sectors such as a banking, fi...

  6. The Effect of Graduate Education on the Performance of Air Force Officers

    Science.gov (United States)

    2007-03-01

    Schilmer, Thie, Harrell, Tseng, 2006). One of the foundations for this continued advantage is the level of graduate education attained by the U.S...attributed to graduate education to be inaccurate. 15 Self-selection bias plays an even greater role within an internal labor market. It has been...GRADUATE EDUCATION ON THE PERFORMANCE OF AIR FORCE OFFICERS by Jeffrey P. Pearson March 2007 Thesis Advisor: Stephen L. Mehay Co-advisor

  7. Graduate diplomas in nuclear technology

    Energy Technology Data Exchange (ETDEWEB)

    Bereznai, G. [Univ. of Ontario Inst. of Tech., Oshawa, Ontario (Canada)

    2009-07-01

    The University of Ontario Institute of Technology (UOIT) offers a graduate diploma program in nuclear technology that consists of a suite of six sub-specialties: Fuel, Materials and Chemistry; Reactor Systems; Operation and Maintenance; Safety, Licensing and Regulatory Affairs; Health Physics; and Radiological Applications. Four courses selected from a list that covers the knowledge and skill set of each sub-specialty have to be completed in order to gain a graduate diploma in the specific area. The program is designed to accommodate the needs of people working in the nuclear industry to upgrade their knowledge and skills, to promote career advancement and to provide a framework for lifelong learning. (author)

  8. Graduates beliefs about career management

    Directory of Open Access Journals (Sweden)

    Babić Lepa

    2012-06-01

    Full Text Available Career management is increasingly becoming an individuals' matter, despite the various activities organized by the different institutions to support career development and planning. An exploratory survey was conducted to determine what kind of beliefs graduates have about career management. Results indicate that graduates are aware of the importance of university knowledge for getting a job, the importance of knowledge and investment in education for positioning in the labor market, so they give priority to development opportunities that business brings opposed to the material rewards.

  9. Prototyping Feedback for Technology Enhanced Learning

    DEFF Research Database (Denmark)

    Cojocaru, Dorian; Spikol, Daniel; Friesel, Anna

    2016-01-01

    secondary-level high school STEM learning environments to post-secondary level engineering classes and design studios. Given this experience and framework, the present paper provides a perspective on the importance of using such research experience and iterative prototyping in real learning environments......The development of new educational technologies, in the area of practical activities is the main aim of the FP7 PELARS project. As part of the constructivist learning scenarios, according to the project proposal, the development and evaluation of technology designs are envisaged, for analytic data...... generation for Science, Technology, Engineering and Mathematics (STEM) subjects, such as: technology solutions, infrastructure, activities, assessment, curricula, and classroom furniture and environment designs. Inside four EU national settings, three separate learning contexts are being dealt with – from...

  10. Structural behaviour of the GAMMA 60 prototype

    Energy Technology Data Exchange (ETDEWEB)

    Falchetta, M.; Matano, F. [ENEA C.R.E., Rome (Italy); Botta, G.; Cavaliere, M. [ENEL C.R.E.,Milano (Italy); Doman, G.S.; Golinelli, S. [West V., Rome (Italy); Viani, S. [ISMES (Italy)

    1996-12-31

    A joint test campaign started in April 1993 on the GAMMA 60 broad range variable speed, yaw controlled, 1500 kW wind turbine prototype, operating at the ENEL test field of Alta Nurra - Sardinia. As part of the test campaign the structural behaviour of the machine has been investigated and the aeroelastic simulation of the machine using GAROS code has been improved and verified with available data. The experimental loads, measured with a number of strain gages at various locations in the rotor, yaw actuator and tower have been compared, as far as possible, with the design loads. No major structural problems have been detected during operation, while measured loads and stress levels are generally comparable with the design assumptions. In addition, substantial experience in the use of the code has been gained, increasing confidence level of predictions. (author)

  11. Elaboration on an Integrated Architecture and Requirement Practice: Prototyping with Quality Attribute Focus

    Science.gov (United States)

    2013-05-01

    release level prototyping as:  The R&D prototype is typically funded by the organization, rather than the client .  The work is done in an R&D...performance) with hopes that this capability could be offered to multiple clients . The clustering prototype is developed in the organization’s R&D...ICSE Conference 2013) [5] A. Martini, L. Pareto , and J. Bosch, “Enablers and inhibitors for speed with reuse,” Proceedings of the 16th Software

  12. Project management strategies for prototyping breakdowns

    DEFF Research Database (Denmark)

    Granlien, Maren Sander; Pries-Heje, Jan; Baskerville, Richard

    2009-01-01

    , managing the explorative and iterative aspects of prototyping projects is not a trivial task. We examine the managerial challenges in a small scale prototyping project in the Danish healthcare sector where a prototype breakdown and project escalation occurs. From this study we derive a framework...... of strategies for coping with escalation in troubled prototyping projects; the framework is based on project management triangle theory and is useful when considering how to manage prototype breakdown and escalation. All strategies were applied in the project case at different points in time. The strategies led...

  13. Z-1 Prototype Space Suit Testing Summary

    Science.gov (United States)

    Ross, Amy

    2013-01-01

    The Advanced Space Suit team of the NASA-Johnson Space Center performed a series of test with the Z-1 prototype space suit in 2012. This paper discusses, at a summary level, the tests performed and results from those tests. The purpose of the tests were two-fold: 1) characterize the suit performance so that the data could be used in the downselection of components for the Z-2 Space Suit and 2) develop interfaces with the suitport and exploration vehicles through pressurized suit evaluations. Tests performed included isolated and functional range of motion data capture, Z-1 waist and hip testing, joint torque testing, CO2 washout testing, fit checks and subject familiarizations, an exploration vehicle aft deck and suitport controls interface evaluation, delta pressure suitport tests including pressurized suit don and doff, and gross mobility and suitport ingress and egress demonstrations in reduced gravity. Lessons learned specific to the Z-1 prototype and to suit testing techniques will be presented.

  14. Results from the FDIRC prototype

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, D.A., E-mail: roberts@umd.edu [University of Maryland, College Park, MD 20742 (United States); Arnaud, N. [Laboratoire de l’Accélérateur Linéaire, Centre Scientifique d’Orsay, F-91898 Orsay Cedex (France); Dey, B. [University of California, Riverside, CA 92521 (United States); Borsato, M. [Laboratoire de l’Accélérateur Linéaire, Centre Scientifique d’Orsay, F-91898 Orsay Cedex (France); Leith, D.W.G.S.; Nishimura, K.; Ratcliff, B.N. [SLAC, Stanford University, Palo Alto, CA 94309 (United States); Varner, G. [University of Hawaii, Honolulu, HI 96822 (United States); Va’vra, J. [SLAC, Stanford University, Palo Alto, CA 94309 (United States)

    2014-12-01

    We present results from a novel Cherenkov imaging detector called the Focusing DIRC (FDIRC). This detector was designed as a prototype of the particle identification system for the SuperB experiment, and comprises 1/12 of the SuperB barrel azimuthal coverage with partial electronics implementation. The prototype was tested in the SLAC Cosmic Ray Telescope (CRT) which provides 3-D muon tracking with an angular resolution of ∼1.5 mrad, track position resolution of 5–6 mm, start time resolution of 70 ps, and a muon low-energy cutoff of ∼2 GeV provided by an iron range stack. The quartz focusing photon camera couples to a full-size BaBar DIRC bar box and is read out by 12 Hamamatsu H8500 MaPMTs providing 768 pixels. We used IRS2 waveform digitizing electronics to read out the MaPMTs. We present several results from our on-going development activities that demonstrate that the new optics design works very well, including: (a) single photon Cherenkov angle resolutions with and without chromatic corrections, (b) S/N ratio between the Cherenkov peak and background, which consists primarily of ambiguities in possible photon paths to a given pixel, (c) dTOP=TOP{sub measured}–TOP{sub expected} resolutions, and (d) performance of the detector in the presence of high-rate backgrounds. We also describe data analysis methods and point out limits of the present performance. - Highlights: • We present results from a novel Cherenkov imaging detector called the Focusing DIRC (FDIRC). • The prototype was tested in the SLAC Cosmic Ray Telescope (CRT) which provides 3-D muon tracking. • We present several results from our on-going development activities that demonstrate that new optics design works very well. • We describe data analysis methods and point out limits of the present performance.

  15. Digital Prototyping of Milk Products

    DEFF Research Database (Denmark)

    Frisvad, Jeppe Revall; Nielsen, Otto Højager Attermann; Skytte, Jacob Lercke

    2012-01-01

    reflectance measurements can be used for more extensive validation and for gathering data that can be used to extend our current model such that it can also predict how the optical properties develop during fermentation or acidification of milk to yogurt. A well-established way of measuring optical properties...... prototyping of milk products such that it can also predict how the optical properties develop during gelation of milk to yogurt. The influence of the colloidal aggregation on the optical properties is described by the static structure factor. As our method is noninvasive, we can use our setup for monitoring...

  16. Mechanical Prototyping and Manufacturing Internship

    Science.gov (United States)

    Grenfell, Peter

    2016-01-01

    The internship was located at the Johnson Space Center (JSC) Innovation Design Center (IDC), which is a facility where the JSC workforce can meet and conduct hands-on innovative design, fabrication, evaluation, and testing of ideas and concepts relevant to NASA's mission. The tasks of the internship included mechanical prototyping design and manufacturing projects in service of research and development as well as assisting the users of the IDC in completing their manufacturing projects. The first project was to manufacture hatch mechanisms for a team in the Systems Engineering and Project Advancement Program (SETMAP) hexacopter competition. These mechanisms were intended to improve the performance of the servomotors and offer an access point that would also seal to prevent cross-contamination. I also assisted other teams as they were constructing and modifying their hexacopters. The success of this competition demonstrated a proof of concept for aerial reconnaissance and sample return to be potentially used in future NASA missions. I also worked with Dr. Kumar Krishen to prototype an improved thermos and a novel, portable solar array. Computer-aided design (CAD) software was used to model the parts for both of these projects. Then, 3D printing as well as conventional techniques were used to produce the parts. These prototypes were then subjected to trials to determine the success of the designs. The solar array is intended to work in a cluster that is easy to set up and take down and doesn't require powered servomechanisms. It could be used terrestrially in areas not serviced by power grids. Both projects improve planetary exploration capabilities to future astronauts. Other projects included manufacturing custom rail brackets for EG-2, assisting engineers working on underwater instrument and tool cases for the NEEMO project, and helping to create mock-up parts for Space Center Houston. The use of the IDC enabled efficient completion of these projects at

  17. Prototype system of secure VOD

    Science.gov (United States)

    Minemura, Harumi; Yamaguchi, Tomohisa

    1997-12-01

    Secure digital contents delivery systems are to realize copyright protection and charging mechanism, and aim at secure delivery service of digital contents. Encrypted contents delivery and history (log) management are means to accomplish this purpose. Our final target is to realize a video-on-demand (VOD) system that can prevent illegal usage of video data and manage user history data to achieve a secure video delivery system on the Internet or Intranet. By now, mainly targeting client-server systems connected with enterprise LAN, we have implemented and evaluated a prototype system based on the investigation into the delivery method of encrypted video contents.

  18. CERN LHC dipole prototype success

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    In a crash programme, the first prototype superconducting dipole magnet for CERN's LHC protonproton collider was successfully powered for the first time at CERN on 14 April, eventually sailing to 9T, above the 8.65T nominal LHC field, before quenching for the third time. The next stage is to install the delicate measuring system for making comprehensive magnetic field maps in the 10 m long, 50 mm diameter twin-apertures of the magnet. These measurements will check that the required LHC field quality has been achieved at both the nominal and injection fields

  19. Prototype plutonium-storage monitor

    International Nuclear Information System (INIS)

    Bliss, M.; Craig, R.A.; Sunberg, D.S.; Warner, R.A.

    1996-01-01

    Pacific Northwest National Laboratory (PNNL) has fabricated cerium-activated lithium silicate scintillating fibers via a hot-downdraw process. These fibers typically have an operational transmission length (e -1 length) of greater than 2 meters. This permits the fabrication of devices that, hitherto, were not possible to consider. A prototype neutron monitor for scrap Pu-storage containers was fabricated and tested for 70 days, taking data with a variety of sources in a high-background environment. These data and their implication in the context of a storage-monitor situation are discussed

  20. Rapid prototyping of robotic platforms

    CSIR Research Space (South Africa)

    De Ronde, Willis

    2016-11-01

    Full Text Available of thickness up to 200mm can be cut to create prototype chassis/ bodies or even the final product. One of the few limitations is the cutting of certain laminated materials, as this tends to produce delaminated cutting edges or even fractures in the case... mine inspection robot (Shongololo). Shongololo’s frame is made from engineering plastics while the chassis of Dassie was made from aluminium and cut using abrasive waterjet machining. The advantage of using abrasive waterjet machining is the speed...

  1. EERE Resources for Graduate Students

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-04-01

    The Office of Energy Efficiency and Renewable Energy (EERE) at the U.S. Department of Energy (DOE) has a number of resources available for graduate students, including research positions, internships, and career-planning information to help you navigate the education-to-employment pathway in energy.

  2. Nontraditional Student Graduation Rate Benchmarks

    Science.gov (United States)

    Miller, Nathan B.

    2014-01-01

    The prominence of discourse on postsecondary degree completion, student persistence, and retention has increased in the national dialogue. Heightened attention to college completion rates by the federal government and pressure to tie state funding to performance metrics associated with graduation rates are catalysts for the discussion.…

  3. The migration of university graduates

    DEFF Research Database (Denmark)

    Drejer, Ina; Holm, Jacob Rubæk; Nielsen, Kristian

    Several studies have documented that highly educated citizens contribute to regional economic performance (Moretti, 2013; Faggian and McCann,2009b; Sterlacchini 2008). Moreover, Åstebro et al. (2012) emphasize the importance of promoting start-up by recent university graduates. Thus, the retentio...

  4. Back on Track to Graduate

    Science.gov (United States)

    Balfanz, Robert

    2011-01-01

    The Talent Development program at Johns Hopkins, City Year, and Communities in Schools have created a new middle school and high school model that reduces dropout risk. Diplomas Now integrates strategies that are designed to raise student achievement, promotion, and graduation rates in the nation's most challenged high-poverty secondary schools. A…

  5. Graduates: Perceptions of MBA Value

    Science.gov (United States)

    Bledsoe, Maynard T.; Oatsvall, Rebecca

    2009-01-01

    MBA worth--who decides? Much of the current assessment comes from market driven and/or institutional perspectives. This research examines responses from Meredith College MBA graduates to determine their perceptions of the worth and value of their MBA experience.

  6. Graduate admissions in clinical neuropsychology: the importance of undergraduate training.

    Science.gov (United States)

    Karazsia, Bryan T; Stavnezer, Amy Jo; Reeves, Jonathan W

    2013-11-01

    Discussions of and recommendations for the training of clinical neuropsychologists exist at the doctoral, internship, and post-doctoral level. With few exceptions, the literature on undergraduate preparations in clinical neuropsychology is sparse and lacks empirical evidence. In the present study, graduate-level faculty and current trainees completed surveys about graduate school preparations. Faculty expectations of minimum and ideal undergraduate training were highest for research methods, statistics, and assessment. Preferences for "goodness of fit" also emerged as important admissions factors. These results offer evidence for desirable undergraduate preparations for advanced study in clinical neuropsychology. Although undergraduate training in psychology is intentionally broad, results from this study suggest that students who desire advanced study in clinical neuropsychology need to tailor their experiences to be competitive in the application process. The findings have implications for prospective graduate students, faculty who train and mentor undergraduates, and faculty who serve on admissions committees.

  7. The prevalence and effect of burnout on graduate healthcare students.

    Science.gov (United States)

    Bullock, Garrett; Kraft, Lynnea; Amsden, Katherine; Gore, Whitney; Prengle, Bobby; Wimsatt, Jeffrey; Ledbetter, Leila; Covington, Kyle; Goode, Adam

    2017-06-01

    Burnout is a growing epidemic among professional healthcare students. Unaddressed burnout has been shown to have psychological and performance related detriments. The purpose of this scoping literature review was to investigate the prevalence of burnout and its effects on the psychological, professional, empathetic ability, and academic acuity of graduate healthcare students. Inclusion criteria included English language papers published within the last 10 years and subjects in graduate healthcare professional programs. This search encompassed 8,214 articles. After title and abstract screening, 127 articles remained and were sorted into five domains of interest: etiology, professionalism, mental health, empathy, and academic performance. After duplicates were removed, 27 articles remained for the scoping review. Graduate level healthcare students had higher levels of burnout than age matched peers and the general population. The high prevalence of burnout within graduate healthcare students can have an effect on their mental health, empathy, and professional conduct. Understanding the occurrence and effects of burnout within graduate healthcare programs allows faculty and administration to plan curriculum, and provide information to students to understand, recognize, and create opportunities to decrease burnout in order to create long lasting quality clinicians.

  8. Prototyping visual interface for maintenance and supply databases

    OpenAIRE

    Fore, Henry Ray

    1989-01-01

    Approved for public release; distribution is unlimited This research examined the feasibility of providing a visual interface to standard Army Management Information Systems at the unit level. The potential of improving the Human-Machine Interface of unit level maintenance and supply software, such as ULLS (Unit Level Logistics System), is very attractive. A prototype was implemented in GLAD (Graphics Language for Database). GLAD is a graphics object-oriented environment for databases t...

  9. Low-friction nanojoint prototype

    Science.gov (United States)

    Vlassov, Sergei; Oras, Sven; Antsov, Mikk; Butikova, Jelena; Lõhmus, Rünno; Polyakov, Boris

    2018-05-01

    High surface energy of individual nanostructures leads to high adhesion and static friction that can completely hinder the operation of nanoscale systems with movable parts. For instance, silver or gold nanowires cannot be moved on silicon substrate without plastic deformation. In this paper, we experimentally demonstrate an operational prototype of a low-friction nanojoint. The movable part of the prototype is made either from a gold or silver nano-pin produced by laser-induced partial melting of silver and gold nanowires resulting in the formation of rounded bulbs on their ends. The nano-pin is then manipulated into the inverted pyramid (i-pyramids) specially etched in a Si wafer. Due to the small contact area, the nano-pin can be repeatedly tilted inside an i-pyramid as a rigid object without noticeable deformation. At the same time in the absence of external force the nanojoint is stable and preserves its position and tilt angle. Experiments are performed inside a scanning electron microscope and are supported by finite element method simulations.

  10. Standardized performance tests of collectors of solar thermal energy: Prototype moderately concentrating grooved collectors

    Science.gov (United States)

    1976-01-01

    Prototypes of moderately concentrating grooved collectors were tested with a solar simulator for varying inlet temperature, flux level, and incident angle. Collector performance is correlated in terms of inlet temperature and flux level.

  11. Context-sensitive service discovery experimental prototype and evaluation

    DEFF Research Database (Denmark)

    Balken, Robin; Haukrogh, Jesper; L. Jensen, Jens

    2007-01-01

    The amount of different networks and services available to users today are increasing. This introduces the need for a way to locate and sort out irrelevant services in the process of discovering available services to a user. This paper describes and evaluates a prototype of an automated discovery...... and selection system, which locates services relevant to a user, based on his/her context and the context of the available services. The prototype includes a multi-level, hierarchical system approach and the introduction of entities called User-nodes, Super-nodes and Root-nodes. These entities separate...... the network in domains that handle the complex distributed service discovery, which is based on dynamically changing context information. In the prototype, a method for performing context-sensitive service discovery has been realised. The service discovery part utilizes UPnP, which has been expanded in order...

  12. Design and fabrication of a 50 MWt prototypical MHD coal-fired combustor

    International Nuclear Information System (INIS)

    Albright, J.; Braswell, R.; Listvinsky, G.; McAllister, M.; Myrick, S.; Ono, D.; Thom, H.

    1992-01-01

    A prototypical 50 MWt coal-fired combustor has been designed and fabricated as part of the Magnetohydrodynamic (MHD) Integrated Topping Cycle (ITC) Program. This is a DOE-funded program to develop a prototypical MHD power train to be tested at the Component Development and Integration Facility (CDIF) in Butte, Montana. The prototypical combustor is an outgrowth of the 50 MWt workhorse combustor which has previously been tested at the CDIF. In addition to meeting established performance criteria of the existing 50 MWt workhorse combustor, the prototypical combustor design is required to be scaleable for use at the 250 MWt retrofit level. This paper presents an overview of the mechanical design of the prototypical combustor and a description of its fabrication. Fabrication of the 50 MWt prototypical coal-fired combustor was completed in February 1992 and hot-fire testing is scheduled to begin in May 1992

  13. Developing the Intercultural Competence of Graduate Students

    Science.gov (United States)

    Dimitrov, Nanda; Dawson, Debra L.; Olsen, Karyn C.; Meadows, Ken N.

    2014-01-01

    This study explores how teaching development programs may facilitate the development of intercultural competence in graduate students and prepare them for communicating effectively in the global workplace after graduation. First, we describe the concept of intercultural teaching competence and examine the skills that graduate students may need to…

  14. Where do Foreign Student STEM graduates work after they graduate?

    Science.gov (United States)

    Ruiz, Neil

    2017-01-01

    Foreign students and entrepreneurs add path-breaking innovative ideas and billions of dollars to the United States economy. This presentation takes a look at where foreign students originate, what degrees and subjects they are pursuing in the U.S., and where they work after they graduate from U.S. universities. With a special focus on STEM degrees and physics, Dr. Ruiz will show how foreign students open up markets in their hometown cities which facilitates trade, foreign direct investment and knowledge transfer. In addition, they infuse revenue into local communities, and they help fill demand for jobs requiring specific skills in local U.S. labor markets. He argues that America's business, educational, and community leaders need to develop better strategies that retain their talents after they graduate. Invited speaker number 44869.

  15. National High School Graduation Rate: Are Recent Birth Cohorts Taking More Time to Graduate?

    Science.gov (United States)

    Joo, Myungkook; Kim, Jeounghee

    2016-01-01

    Debates about the national high school graduation rate have heated up as various national high school graduation estimates based on the Common Core of Data (CCD) and the Current Population Survey (CPS) do not coincide with one another partially due to different assumptions about graduation age. This study found that (a) while graduation rate by…

  16. NDA National Graduate Programme 'nucleargraduates'

    International Nuclear Information System (INIS)

    Dawson, Carl

    2010-01-01

    The aim of this paper is to outline the NDA National Graduate Programme (nuclear graduates). The NDA has a remit under the Energy Act (2004) 'to maintain and develop the skills for decommissioning and nuclear clean-up'. Although current research is now being reviewed, there is significant evidence to suggest that the age profile in the Site Licence Companies is skewed towards older workers and there is likely to be a skill shortage in 3-5 years. As nuclear clean-up is a national issue; skill shortages also become a national issue in a very real sense. In addition, evidence suggests that the industry needs to be constantly challenged in order to achieve its targets for decommissioning. The NDA has a unique position under the Act. It is both a strategic overseer and direct employer. To this end the 'National Graduate Programme' is aligned to both the NDA's previous succession plans and the needs of the industry. Industry needs leadership that challenges the status quo and moves the UK nuclear industry to become best in class; Industry needs a dedicated to programme to address skills shortages and difficult to recruit areas such as, but not exclusively, estimators, schedulers, contract managers, site engineers, decommissioning technicians, safety monitors; The NDA has indicated a 'commercial and politically savvy' cohort is required to meet its own internal challenges and to ensure sustainability in its own workforce, and to be sensitive to the needs of customers and suppliers alike; Need to create a more diversified workforce in the nuclear industry and also plan for new skills evolving from research and development breakthroughs; Need to ensure that Tier 1, 2, 3 and 4 contractors invest in the leadership and skills for the future. World Class - delivery will be benchmarked against UK based multinational companies who operate in a global graduate attraction and development marketplace. The graduates targeted will be from leading institutions and will have a blend of

  17. A MEMS turbine prototype for respiration harvesting

    Science.gov (United States)

    Goreke, U.; Habibiabad, S.; Azgin, K.; Beyaz, M. I.

    2015-12-01

    The design, manufacturing, and performance characterization of a MEMS-scale turbine prototype is reported. The turbine is designed for integration into a respiration harvester that can convert normal human breathing into electrical power through electromagnetic induction. The device measures 10 mm in radius, and employs 12 blades located around the turbine periphery along with ball bearings around the center. Finite element simulations showed that an average torque of 3.07 μNm is induced at 12 lpm airflow rate, which lies in normal breathing levels. The turbine and a test package were manufactured using CNC milling on PMMA. Tests were performed at respiration flow rates between 5-25 lpm. The highest rotational speed was measured to be 9.84 krpm at 25 lpm, resulting in 8.96 mbar pressure drop across the device and 370 mW actuation power.

  18. Prototype rf cavity for the HISTRAP accelerator

    International Nuclear Information System (INIS)

    Mosko, S.W.; Dowling, D.T.; Olsen, D.K.

    1989-01-01

    HISTRAP, a proposed synchrotron-cooling-storage ring designed to both accelerate and decelerate very highly charged very heavy ions for atomic physics research, requires an rf accelerating system to provide /+-/2.5 kV of peak accelerating voltage per turn while tuning through a 13.5:1 frequency range in a fraction of a second. A prototype half-wave, single gap rf cavity with biased ferrite tuning was built and tested over a continuous tuning range of 200 kHz through 2.7 MHz. Initial test results establish the feasibility of using ferrite tuning at the required rf power levels. The resonant system is located entirely outside of the accelerator's 15cm ID beam line vacuum enclosure except for a single rf window which serves as an accelerating gap. Physical separation of the cavity and the beam line permits in situ vacuum baking of the beam line at 300/degree/C

  19. Data-sharing protocol: A prototype implementation

    International Nuclear Information System (INIS)

    Gibney, T.; Greenwood, D.

    1992-12-01

    This paper describes a client/server communication protocol which will allow physicists to access data from cooperating remote experiments. Special low-level ''client'' software within the user's ''home'' data-access library formulates a request for data from the remote experiment. This request is sent over a network to a server at the remote site. The server has specific knowledge about the location and format of the requested data. The server gets the data and sends it over the network to the requesting client, which reformats the data according to the local library's conventions. Our prototype is being developed to suppose remote access to data from ATF, PBX, and micro Vax data from Tore-Supra. We have attempted to create a flexible design which should accommodate data from other experiments as well

  20. Contrasting Grading Approaches in Introductory Physics and Quantum Mechanics: The Case of Graduate Teaching Assistants

    Science.gov (United States)

    Marshman, Emily; Sayer, Ryan; Henderson, Charles; Singh, Chandralekha

    2017-01-01

    At large research universities, physics graduate teaching assistants (TAs) are often responsible for grading in courses at all levels. However, few studies have focused on TAs' grading practices in introductory and advanced physics courses. This study was designed to investigate whether physics graduate TAs grade students in introductory physics…

  1. A Review of Graduate STEM Degrees by Gender in the Context of the Great Recession

    Science.gov (United States)

    Ryland, Austin

    2013-01-01

    The purpose of this study was to review the graduate gender divide in STEM fields in the context of the recent Great Recession. The rationale for this study was a continuation of the pipeline paradigm at the graduate level. The goal was also to examine the gender divide in STEM across select institutional types, such as land-grant institutions, as…

  2. A Look into International Graduate Students' Experience in the United States: A Grounded Theory Model

    Science.gov (United States)

    Fujisaki, Shuko

    2013-01-01

    The number of international students in the United States has been increasing each year, but little is known about their experience. There are recent studies on international students, however, only a few research has focused on international students studying at graduate level. To best study international graduate students' experience, a…

  3. Follow-Up Survey of the 1988-1989 Radiography Graduates of Middlesex Community College.

    Science.gov (United States)

    Spence, Weymouth

    A graduate follow-up survey evaluated student outcomes for the radiography program at Middlesex Community College/Middlesex Memorial Hospital (Connecticut). The program prepares students for entry-level employment as radiographers. The questionnaire, based on input from program officials and respondents, was mailed to 14 1988 and 1989 graduates.…

  4. Two decades of post-graduate training in Applied Public Health: The ...

    African Journals Online (AJOL)

    Two decades of post-graduate training in Applied Public Health: The experience ... in training public health professionals at post-graduate level to offer leadership in ... the mission of promoting the attainment of better health of the people in Uganda and beyond through public health training, research and community service.

  5. An Assessment of Naval ROTC Graduate Performance in Post-Accession Training

    Science.gov (United States)

    1982-10-01

    multiversity ; letters, arts, sciences (LAS); technical), geographic location, and various characteristics of student populations. Additional institutional...significant probably because of the low Ns in the samples. Multiversity NROTC graduates and NROTC graduates from private institutions did produce...Barron’s competitive levels of entering students), Type ( multiversity , technical emphasis, liberal arts emphasis) and Ethnic Predominance were most

  6. Equality of Opportunity in American and Canadian Graduate Education: A Comparison of Gender Differences.

    Science.gov (United States)

    Symons, Gladys L.

    1980-01-01

    Women in Canada and the U.S. enjoy neither equality of access to higher education nor equality of treatment within graduate level institutions. While women in the U.S. have somewhat greater access to graduate study, they are excluded from the sponsorship system in which Canadian women participate. (SB)

  7. Pre-Service Post Graduate Teachers' First Time Experience with Constructivist Learning Environment (CLE) Using MOODLE

    Science.gov (United States)

    Boopathiraj, C.; Chellamani, K.

    2015-01-01

    The aim of this study is to enlighten and discuss Post Graduate student teachers' first time experiences and their level of satisfaction with the use of Moodle Learning Management System (LMS) during their "Research Methods in Education" course offered online. This study investigated 30 pre-service Post Graduate student teachers' to…

  8. Exploring Graduate Entrepreneurship. A Collaborative, Co-Learning Based Approach for Students, Entrepreneurs and Educators

    Science.gov (United States)

    Hannon, Paul D.; Collins, Lorna A.; Smith, Alison J.

    2005-01-01

    There is a strong interest in knowledge-based economies in increasing the levels of graduate entrepreneurship. The role of higher education in this context is crucial in enhancing the motivation and capability of graduates to engage in entrepreneurial activity. However, traditional pedagogical approaches in business and management as applied to…

  9. The Impact of Gender Characteristics on Mentoring in Graduate Departments of Sociology

    Science.gov (United States)

    Dua, Priya

    2008-01-01

    There has been much research on gender inequality in graduate education and the benefits of mentoring. However, most of this research focuses on how mentoring addresses female graduate students' experiences of gender inequality instead of how the gender characteristics of departments impact the level of mentoring they offer. In particular, I…

  10. Employability Skills Initiatives in Higher Education: What Effects Do They Have on Graduate Labour Market Outcomes?

    Science.gov (United States)

    Mason, Geoff; Williams, Gareth; Cranmer, Sue

    2009-01-01

    The present paper makes use of detailed information gathered at university department level, combined with graduate survey data, to assess the impact of different kinds of employability skills initiative on graduate labour market performance. We find that structured work experience and employer involvement in degree course design and delivery have…

  11. Evaluation of the Sentinel-3 Hydrologic Altimetry Processor prototypE (SHAPE) methods.

    Science.gov (United States)

    Benveniste, J.; Garcia-Mondéjar, A.; Bercher, N.; Fabry, P. L.; Roca, M.; Varona, E.; Fernandes, J.; Lazaro, C.; Vieira, T.; David, G.; Restano, M.; Ambrózio, A.

    2017-12-01

    Inland water scenes are highly variable, both in space and time, which leads to a much broader range of radar signatures than ocean surfaces. This applies to both LRM and "SAR" mode (SARM) altimetry. Nevertheless the enhanced along-track resolution of SARM altimeters should help improve the accuracy and precision of inland water height measurements from satellite. The SHAPE project - Sentinel-3 Hydrologic Altimetry Processor prototypE - which is funded by ESA through the Scientific Exploitation of Operational Missions Programme Element (contract number 4000115205/15/I-BG) aims at preparing for the exploitation of Sentinel-3 data over the inland water domain. The SHAPE Processor implements all of the steps necessary to derive rivers and lakes water levels and discharge from Delay-Doppler Altimetry and perform their validation against in situ data. The processor uses FBR CryoSat-2 and L1A Sentinel-3A data as input and also various ancillary data (proc. param., water masks, L2 corrections, etc.), to produce surface water levels. At a later stage, water level data are assimilated into hydrological models to derive river discharge. This poster presents the improvements obtained with the new methods and algorithms over the regions of interest (Amazon and Danube rivers, Vanern and Titicaca lakes).

  12. Graduate Counseling Students' Learning, Development, and Retention of Knowledge

    Science.gov (United States)

    Lambie, Glenn W.; Ieva, Kara P.; Mullen, Patrick R.

    2013-01-01

    The present study investigated 52 graduate counseling students' levels of ethical and legal knowledge (Lambie, Hagedorn, & Ieva, 2010) and social-cognitive development (Hy & Loevinger, 1996) at three points: (a) prior to a counseling ethics course, (b) at the completion of the course, and (c) four months later. Students' ethical and legal…

  13. 77 FR 60956 - State Graduated Driver Licensing Incentive Grant

    Science.gov (United States)

    2012-10-05

    ... and proficiency to move through each level of the system before graduating to the next. States have.... How do I prepare and submit comments? Your comments must be written and in English. To ensure that.... Regulatory Analyses and Notices A. Executive Order (E.O.) 12866 (Regulatory Planning and Review), E.O. 13563...

  14. Cybersecurity Curriculum Development: Introducing Specialties in a Graduate Program

    Science.gov (United States)

    Bicak, Ali; Liu, Michelle; Murphy, Diane

    2015-01-01

    The cybersecurity curriculum has grown dramatically over the past decade: once it was just a couple of courses in a computer science graduate program. Today cybersecurity is introduced at the high school level, incorporated into undergraduate computer science and information systems programs, and has resulted in a variety of cybersecurity-specific…

  15. Mathematical Content of Curricula and Beginning Salaries of Graduating Students

    Science.gov (United States)

    Lee, B. Brian; Lee, Jungsun

    2009-01-01

    The authors examined an association between mathematical content in college-level curricula and beginning salaries of graduating students on the basis of data collected from a public university in the southern region of the United States. The authors classified the mathematical content requirements of the curricula into the following 5 groups…

  16. A Proposed Systems Model for Socializing the Graduate Writer

    Science.gov (United States)

    Jones, David R.

    2018-01-01

    Although researchers chorus the need to support graduate students toward higher levels of writing proficiency, their findings lack a holistic model for doing so. A model emerges upon scrutiny of the factors that have been implicated in supporting writing proficiency. In the proposed model, a socialization theory fits as a proximal process into the…

  17. Technical College Graduate Perceptions of College and Career Readiness

    Science.gov (United States)

    Hanson, Dale M.

    2013-01-01

    The United States workplace requires increased levels of postsecondary education to support workforce development for an economy driven by technology, automation and global competition. By 2018, 63 % of new jobs created will require postsecondary education (Carnevale, Smith, & Strohl, 2010). Currently, one in four graduates earns a bachelor's…

  18. Fixed and growth mindsets in physics graduate admissions

    Directory of Open Access Journals (Sweden)

    Rachel E. Scherr

    2017-11-01

    Full Text Available Considering the evidence that standard physics graduate admissions practices tend to exclude women and traditionally marginalized racial and ethnic groups from the discipline, we investigate (a the characteristics of students that physics graduate admissions committee members seek to admit to their programs and (b the practices associated with these admissions goals. The data for this investigation are interviews with 18 faculty who chair graduate admissions committees in programs that prioritize diversity in their graduate admissions practices. We find that some express elements of an implicit theory of intelligence known as a “fixed mindset,” in which intelligence is understood as an inherent capacity or ability primarily measured by standardized test scores and grades. Some also express elements of a “growth mindset,” in which intelligence is understood in terms of acquired knowledge and effort. Overall, most faculty interviewed expressed elements of both mindsets. A fixed mindset in physics graduate admissions is consistent with research identifying physics as a “brilliance-required” field, whose members tend to believe that raw, innate talent is a primary requirement for success in the discipline. Such a mindset directly affects the participation of women and some racial or ethnic groups, who are stereotyped as lacking such high-level intellectual ability.

  19. Prototype moving-ring reactor

    International Nuclear Information System (INIS)

    Smith, A.C. Jr.; Ashworth, C.P.; Abreu, K.E.

    1982-01-01

    We have completed a design of the Prototype Moving-Ring Reactor. The fusion fuel is confined in current-carrying rings of magnetically-field-reversed plasma (Compact Toroids). The plasma rings, formed by a coaxial plasma gun, undergo adiabatic magnetic compression to ignition temperature while they are being injected into the reactor's burner section. The cylindrical burner chamber is divided into three burn stations. Separator coils and a slight axial guide field gradient are used to shuttle the ignited toroids rapidly from one burn station to the next, pausing for 1/3 of the total burn time at each station. D-T- 3 He ice pellets refuel the rings at a rate which maintains constant radiated power

  20. LEP vacuum chamber, early prototype

    CERN Multimedia

    CERN PhotoLab

    1978-01-01

    The structure of LEP, with long bending magnets and little access to the vacuum chamber between them, required distributed pumping. This is an early prototype for the LEP vacuum chamber, made from extruded aluminium. The main opening is for the beam. The small channel to the right is for cooling water, to carry away the heat deposited by the synchroton radiation from the beam. The 4 slots in the channel to the left house the strip-shaped ion-getter pumps (see 7810255). The ion-getter pumps depended on the magnetic field of the bending magnets, too low at injection energy for the pumps to function well. Also, a different design was required outside the bending magnets. This design was therefore abandoned, in favour of a thermal getter pump (see 8301153 and 8305170).

  1. Prototype international quality assurance program

    International Nuclear Information System (INIS)

    Broadway, J.A.; Chambless, D.A.; Sapozhnikov, Yu.A.; Kalmykov, S.N.

    1998-01-01

    The international community presently lacks the ability to determine the quality and credibility of environmental measurements that is required to make sound decisions in matters related to international security, public health, and investment-related considerations. The ultimate goal of the work described in this article is to develop a credible information base including measurement capability for determination of environmental contamination and the potential for proliferation of material components of chemical or nuclear weapons. This study compared the accuracy obtained by six Russian and six U.S. laboratories for samples representative of classes of trace metals, dioxing-furans, and radioactive substances. The results obtained in this work indicate that current estimates for laboratory accuracy are likely overly optimistic. The weaknesses discovered by this prototype U.S. - Russia study also exist within the broader international community of laboratories. Further work is proposed to address the urgent need for the international community to improve performance evaluations for analytical measurements. (author)

  2. Prototype of industrial electrons accelerator

    International Nuclear Information System (INIS)

    Lopez, V.H.; Valdovinos, A.M.

    1992-01-01

    The interest and the necessity of Mexico's industry in the use of irradiation process has been increased in the last years. As examples are the irradiation of combustion gases (elimination of NO x and SO 2 ) and the polymer cross-linking between others. At present time at least twelve enterprises require immediately of them which have been contacted by electron accelerators suppliers of foreign countries. The first project step consisted in to identify the electrons accelerator type that in can be constructed in Mexico with the major number of possible equipment, instruments, components and acquisition materials local and useful for the major number of users. the characteristics of the accelerator prototype are: accelerator type transformer with multiple secondary insulated and rectifier circuits with a potential of 0.8 MV of voltage, the second step it consisted in an economic study that permitted to demonstrate the economic feasibility of its construction. (Author)

  3. Hadron therapy information sharing prototype

    CERN Document Server

    Roman, Faustin Laurentiu; Kanellopoulos, Vassiliki; Amoros, Gabriel; Davies, Jim; Dosanjh, Manjit; Jena, Raj; Kirkby, Norman; Peach, Ken; Salt, Jose

    2013-01-01

    The European PARTNER project developed a prototypical system for sharing hadron therapy data. This system allows doctors and patients to record and report treatment-related events during and after hadron therapy. It presents doctors and statisticians with an integrated view of adverse events across institutions, using open-source components for data federation, semantics, and analysis. There is a particular emphasis upon semantic consistency, achieved through intelligent, annotated form designs. The system as presented is ready for use in a clinical setting, and amenable to further customization. The essential contribution of the work reported here lies in the novel data integration and reporting methods, as well as the approach to software sustainability achieved through the use of community-supported open-source components.

  4. PEP-II prototype klystron

    International Nuclear Information System (INIS)

    Fowkes, W.R.; Caryotakis, G.; Lee, T.G.; Pearson, C.; Wright, E.L.

    1993-04-01

    A 540-kW continuous-wave (cw) klystron operating at 476 MHz was developed for use as a power source for testing PEP-II rf accelerating cavities and rf windows. It also serves as a prototype for a 1.2 MW cw klystron presently being developed as a potential rf source for asymmetric colliding ring use. The design incorporates the concepts and many of the parts used in the original 353 MHz PEP klystron developed sixteen years ago. The superior computer simulation codes available today result in improved performance with the cavity frequencies, drift lengths, and output circuit optimized for the higher frequency.The design and operating results of this tube are described with particular emphasis on the factors which affect efficiency and stability

  5. The Yucca Mountain Project Prototype Testing Program

    International Nuclear Information System (INIS)

    1989-10-01

    The Yucca Mountain Project is conducting a Prototype Testing Program to ensure that the Exploratory Shaft Facility (ESF) tests can be completed in the time available and to develop instruments, equipment, and procedures so the ESF tests can collect reliable and representative site characterization data. This report summarizes the prototype tests and their status and location and emphasizes prototype ESF and surface tests, which are required in the early stages of the ESF site characterization tests. 14 figs

  6. Test case preparation using a prototype

    OpenAIRE

    Treharne, Helen; Draper, J.; Schneider, Steve A.

    1998-01-01

    This paper reports on the preparation of test cases using a prototype within the context of a formal development. It describes an approach to building a prototype using an example. It discusses how a prototype contributes to the testing activity as part of a lifecycle based on the use of formal methods. The results of applying the approach to an embedded avionics case study are also presented.

  7. A prototype for JDEM science data processing

    International Nuclear Information System (INIS)

    Gottschalk, Erik E

    2011-01-01

    Fermilab is developing a prototype science data processing and data quality monitoring system for dark energy science. The purpose of the prototype is to demonstrate distributed data processing capabilities for astrophysics applications, and to evaluate candidate technologies for trade-off studies. We present the architecture and technical aspects of the prototype, including an open source scientific execution and application development framework, distributed data processing, and publish/subscribe message passing for quality control.

  8. Rapid prototyping using CBCT: an initial experience

    International Nuclear Information System (INIS)

    Yovchev, D.; Deliverska, E.; Indjova, J.; Ugrinov, R.

    2011-01-01

    This report presents a case of fibrous dysplasia in the left lower jaw of a 12-year-old girl, scanned with CBCT. On the basis of CBCT scan a model of affected jaw was produced using a rapid-prototyping three-dimensional printer. The case demonstrates the possibility to get a prototype by CBCT data. Prototypes can be used to support the diagnosis, planning, training (students and postgraduates) and to obtain informed consent from the patient.

  9. Prototype calorimeters for the NA3 experiment

    CERN Multimedia

    1975-01-01

    The NA3 Experiment was set-up on the North Area of the SPS by the CERN/ Ecole Polytechnique/College de France/ Orsay/Saclay Collaboration, to study high transverse momentum leptons and hadrons from hadron collisions. The calorimeters measured the energy of hadrons (prototype on the right) and leptons (prototype on the left). They used a new type of plastic scintillator (plexipop). (see CERN Courier of November 1975) energy (prototype on the right)

  10. Graduating into a downturn: Are physicians recession proof?

    Science.gov (United States)

    Chen, Alice; Sasso, Anthony Lo; Richards, Michael R

    2018-01-01

    An extensive literature documents immediate and persistent adverse labor market outcomes for individuals graduating into an economic downturn, but these effects are heterogeneous across sectors, occupations, and skill levels. In particular, the impact of recessions on the labor market outcomes for new physician graduates remains unknown. We leverage a unique dataset on New York physicians to analyze if and how the Great Recession impacted the labor market of physicians who have completed their residency and fellowship training and are seeking their first job. We find that these physicians do not delay labor market entry and their job searches and other employment outcomes are unaffected by the business cycle. The collage of evidence demonstrates that new graduates were largely unfazed by the recent downturn, which sharply contrasts with other highly educated, high remunerating occupations. Copyright © 2017 John Wiley & Sons, Ltd.

  11. An international interdisciplinary graduate school in laser and material science

    Science.gov (United States)

    Fargin, Evelyne; Sarger, Laurent; Kaluza, Malte; Nolte, Stefan; Richardson, Martin; Richardson, Kathleen

    2009-06-01

    The main objective is to establish the first transatlantic Graduate School, proposing a truly international education, training and research platform in the field of Photonics and Material sciences. The wide scope of Photonics encompasses many application fields that will be mostly covered by various curricula involving Laser Optics and Material Sciences and Interactions. This cooperation will build a very efficient scientific international community able to address the 21 century challenges in Photonics and applications. Indeed, the highest level of education, namely Master and PhD , will address the so called "Skill shortage" that impact on our economy. The truly interdisciplinary theme of this graduate school is also a guarantee for the insertion of the graduate into the workforce.

  12. Entrepreneurship of dietetic program graduates.

    Science.gov (United States)

    Mann, Linda L; Blum, Ilya

    2004-01-01

    Successful dietetic program graduates must have an entrepreneurial mindset and skills to respond to environmental changes and consumer trends. The purpose of this study was to determine current or intended entrepreneurship by graduates of a Dietitians of Canada accredited university program, as influenced by self-efficacy stemming from entrepreneurial experiences in education or early career, as well as by internal and external factors. This study employed an exploratory descriptive methodology with a questionnaire mailed to a discrete sample. Ninety graduates completed and returned the questionnaire for a response rate of 55%. Data analysis included descriptive statistics, two-way table analysis, the chi-square test for independence, and Fisher's exact test. Significant relationships were found between self-efficacy scores and entrepreneurial action, specific entrepreneurial experiences and entrepreneurial intent and action, dietetic internship and intent, and belief in the importance of business skills and intent. Those with entrepreneurial intent and/or action identified creativity, dietetic education/internship, persistence, business skills, and family/friend support as helping factors. These results suggest that undergraduate, internship, and continuing education programs for dietitians should incorporate activities that develop entrepreneurial skills and contribute toward an entrepreneurial mindset.

  13. A survey of the opinions of recent veterinary graduates and employers regarding early career business skills.

    Science.gov (United States)

    Bachynsky, E A; Dale, V H M; Kinnison, T; Gazzard, J; Baillie, S

    2013-06-08

    A questionnaire was designed to assess recent veterinary graduates' proficiency in early career business skills, from the perspectives of graduates of 2006-2008 and employers of recent graduates in the UK. Recent graduates perceived themselves to be generally more competent in financial matters than employers considered them to be. However, when specific skills were assessed, graduates felt less prepared than employers considered them to be competent. Overall, graduates and employers rated recent graduates' preparedness/competence as poor to average for all skills, which were regarded as having average to high importance. Both groups commented on the difficulties faced by new graduates in terms of client communication (generally and financially), and having the confidence to charge clients appropriately for veterinary services. The results of this study indicate that veterinary schools need to take a more active role in the teaching of basic finance skills in order to equip graduates with essential early career competencies. It is anticipated that the information reported will help inform undergraduate curriculum development and highlight the need for increased training at the continuing education level.

  14. Advancing resident assessment in graduate medical education.

    Science.gov (United States)

    Swing, Susan R; Clyman, Stephen G; Holmboe, Eric S; Williams, Reed G

    2009-12-01

    The Outcome Project requires high-quality assessment approaches to provide reliable and valid judgments of the attainment of competencies deemed important for physician practice. The Accreditation Council for Graduate Medical Education (ACGME) convened the Advisory Committee on Educational Outcome Assessment in 2007-2008 to identify high-quality assessment methods. The assessments selected by this body would form a core set that could be used by all programs in a specialty to assess resident performance and enable initial steps toward establishing national specialty databases of program performance. The committee identified a small set of methods for provisional use and further evaluation. It also developed frameworks and processes to support the ongoing evaluation of methods and the longer-term enhancement of assessment in graduate medical education. The committee constructed a set of standards, a methodology for applying the standards, and grading rules for their review of assessment method quality. It developed a simple report card for displaying grades on each standard and an overall grade for each method reviewed. It also described an assessment system of factors that influence assessment quality. The committee proposed a coordinated, national-level infrastructure to support enhancements to assessment, including method development and assessor training. It recommended the establishment of a new assessment review group to continue its work of evaluating assessment methods. The committee delivered a report summarizing its activities and 5 related recommendations for implementation to the ACGME Board in September 2008.

  15. A Study on Factors Affecting Navy Officers’ Decisions to Pursue Funded Graduate Education: A Qualitative Approach

    Science.gov (United States)

    2017-06-01

    especially when 6 faced with uncertainty within an environment and specifically how graduate education enables officers to establish an extensive array...Navy flag officer is responsible to the Vice Chief of Naval Operations for ensuring the education programs, especially higher level programs, are...California, is the primary source of graduate education for naval officers, especially SWO officers. It is a fully 10 funded graduate level institution

  16. Navigating graduate school and beyond: A career guide for graduate students and a must read for every advisor

    Science.gov (United States)

    Schultz, Colin

    2012-05-01

    Beginning his scientific career as an engineering student at PSG College of Technology, in Coimbatore, India, Sundar A. Christopher has negotiated and navigated the higher-education system to become the chairman of the Department of Atmospheric Sciences at the University of Alabama in Huntsville. Drawing on his own experiences and on insights gleaned from the students who have passed through his graduate-level professional development course, Christopher takes a lighthearted look at peer review, proposal writing, managing budgets, and making the most of conferences in the AGU bookNavigating Graduate School and Beyond: A Career Guide for Graduate Students and a Must Read for Every Advisor. In this interview, Eos speaks to Christopher about overcoming the bureaucratic, logistical, and personal hurdles that too often lead students to disillusionment and conflict.

  17. Air injection test on a Kaplan turbine: prototype - model comparison

    Science.gov (United States)

    Angulo, M.; Rivetti, A.; Díaz, L.; Liscia, S.

    2016-11-01

    Air injection is a very well-known resource to reduce pressure pulsation magnitude in turbines, especially on Francis type. In the case of large Kaplan designs, even when not so usual, it could be a solution to mitigate vibrations arising when tip vortex cavitation phenomenon becomes erosive and induces structural vibrations. In order to study this alternative, aeration tests were performed on a Kaplan turbine at model and prototype scales. The research was focused on efficiency of different air flow rates injected in reducing vibrations, especially at the draft tube and the discharge ring and also in the efficiency drop magnitude. It was found that results on both scales presents the same trend in particular for vibration levels at the discharge ring. The efficiency drop was overestimated on model tests while on prototype were less than 0.2 % for all power output. On prototype, air has a beneficial effect in reducing pressure fluctuations up to 0.2 ‰ of air flow rate. On model high speed image computing helped to quantify the volume of tip vortex cavitation that is strongly correlated with the vibration level. The hydrophone measurements did not capture the cavitation intensity when air is injected, however on prototype, it was detected by a sonometer installed at the draft tube access gallery.

  18. Prototype Engineered Barrier System Field Tests (PEBSFT)

    International Nuclear Information System (INIS)

    Ramirez, A.L.; Wilder, D.G.

    1991-02-01

    This progress report presents the interpretation of data obtained (up to November 1, 1988) from the Prototype Engineered Barrier System Field Tests (PEBSFT) that are being performed for the Yucca Mountain Project (YMP) in G-Tunnel within the Nevada Test site. The PEBSFTs are being conducted to evaluate the applicability of measurement techniques, numerical models, and procedures developed for the field tests for future investigations that will be conducted in the Exploratory Shaft Facilities, at a potential high-level radioactive waste repository site in Yucca Mountain. The primary objective of the tests is to provide the basis for determining whether tests planned for Yucca Mountain have the potential to be successful. Thirteen chapters discuss the following: mapping the electromagnetic permittivity and attenuation rate of the rock mass; changes in moisture content detected by the neutron logging probe; characterization of the in-situ permeability of the fractured tuff around the heater borehole; electrical resistance heater installed in a 30-cm borehole; relative humidity measurements; the operation, design, construction, calibration, and installation of a microwave circuit that might provide partial pressure information at temperatures in excess of 200 degree C (392 degree F); pressure and temperature measurements in the G-Tunnel; the moisture collection system, which attempts to collect steam that migrates into the heater borehole; The borehole television and borescope surveys that were performed to map the location, orientation, and aperture of the fractures intersecting the boreholes; preliminary scoping calculations of the hydrothermal conditions expected for this prototype test; the Data Acquisition System; and the results of the PEBSFT, preliminary interpretations of these results, and plans for the remainder of the test. Chapters have been indexed separately for inclusion on the data base

  19. Prototype development of user specific climate services

    Science.gov (United States)

    Jacob, Daniela

    2017-04-01

    Systematic consultations in the last years with representatives from sectors particularly affected by climate change have helped the Climate Service Center Germany (GERICS) to identify the most pressing needs of stakeholders from public and private sectors. Besides the development of innovative climate service products and methods, areas are also identified, for which intensive research activities have to be initiated. An example is the demand of decision makers for high-resolution climate change information needed at regional to local levels for their activities towards climate change adaptation. For questions concerning adaptation to climate change, no standard solutions can be provided. Different from mitigation measures, adaptation measures must be framed in accordance with the specific circumstances prevailing in the local situation. Here, individual solutions, which satisfy the individual requirements and needs, are necessary. They have to be developed in close co-operation with the customers and users. For example, the implications of climate change on strategic and operative decisions, e.g. in enterprises and urban planning, are becoming increasingly important. Therefore, high-quality consultancy for businesses and public administration is needed, in order to support decision makers in identifying associated risks and opportunities. For the development of prototype products, GERICS has framed a general methodological approach, including the idea generation, the iterative development, and the prototype testing in co-development with the user. High process transparency and high product quality are prerequisite for the success of a product. The co-development process ensures the best possible communication of user tailored climate change information for different target groups.

  20. Oral Cancer Knowledge Assessment: Newly Graduated versus Senior Dental Clinicians

    Science.gov (United States)

    Salgado de Souza, Ricardo; Gallego Arias Pecorari, Vanessa; Lauria Dib, Luciano

    2018-01-01

    The present study assessed the level of dentists' knowledge regarding oral cancer in the city of São Paulo, Brazil. A questionnaire was used to compare the level of knowledge among newly graduated and senior clinicians. A total of 20,154 e-mails were correctly delivered to the dentists registered in the database of the Regional Dentistry Council of São Paulo, and 477 (2.36%) responses were received. This sample consisted of 84 newly graduated clinicians and 105 senior clinicians. For the statistical analysis, the chi-square test and the logistic regression analysis were performed with α = 0.05, and the results were described herein. According to their knowledge level, the results were statistically different between the groups, since 19% of the newly graduated clinicians were evaluated with knowledge grade A (excellent) in comparison to 6.7% of the senior clinicians. In spite of the results indicated that newly graduated clinicians' knowledge regarding oral cancer was 2.1 times higher, 34.5% of the professionals in this group had regular or poor knowledge on the subject, and several questions relating to clinical characteristics and risk factors indicated that there still exist some knowledge gaps, demonstrating that there is a need for further studies and information activities addressing oral cancer. PMID:29666649

  1. Enhancing experience prototyping by the help of mixed-fidelity prototypes

    OpenAIRE

    Yasar, Ansar-Ul-Haque

    2007-01-01

    In this research review I undertook the problem related to the usage of a new concept known as the Mixed- Fidelity Prototype which is a mixture of its predecessors Low- and High- Fidelity Prototypes in Experience Prototyping. Experience Prototyping is a good way to explore, communicate and interact with the designs we develop like experiencing cycling on the ice, although the mood, snow conditions, bicycle type and many other factors really matter and tend to change with time. Experience Prot...

  2. Prototyping SOS meta-theory in Maude

    NARCIS (Netherlands)

    Mousavi, M.R.; Reniers, M.A.; Mosses, P.D.; Ulidowski, I.

    2006-01-01

    We present a prototype implementation of SOS meta-theory in the Maude term rewriting language. The prototype defines the basic concepts of SOS meta-theory (e.g., transition formulae, deduction rules and transition system specifications) in Maude. Besides the basic definitions, we implement methods

  3. OPAL jet chamber full-scale prototype

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, H M; Hauschild, M; Hartmann, H; Hegerath, A; Boerner, H; Burckhart, H J; Dittmar, M; Hammarstroem, R; Heuer, R D; Mazzone, L

    1986-12-01

    The concept of a jet chamber for the central detector of OPAL was tested with a full scale prototype. The design of this prototype, its mechanical and electrical structure and its support system for high voltage, gas, laser calibration, and readout are described. Operating experience was gathered since summer 1984. The chamber performance in terms of spatial resolution and particle identification capability is given.

  4. Gamification in a Prototype Household Energy Game

    NARCIS (Netherlands)

    Fijnheer, J.D.L.; van Oostendorp, H.; Veltkamp, R.C.

    2016-01-01

    Research where gamification is used to influence household energy consumption is an emerging field. This paper reviews design features of the prototype Powersaver Game. The aim of this game is to influence household energy consumption in the long-term. The evaluation of the design of the prototype,

  5. Rapid Prototyping in Instructional Design: Creating Competencies

    Science.gov (United States)

    Fulton, Carolyn D.

    2010-01-01

    Instructional designers working in rapid prototyping environments currently do not have a list of competencies that help to identify the knowledge, skills, and attitudes (KSAs) required in these workplaces. This qualitative case study used multiple cases in an attempt to identify rapid prototyping competencies required in a rapid prototyping…

  6. How does the medical graduates' self-assessment of their clinical competency differ from experts' assessment?

    Science.gov (United States)

    2013-01-01

    Background The assessment of the performance of medical school graduates during their first postgraduate years provides an early indicator of the quality of the undergraduate curriculum and educational process. The objective of this study was to assess the clinical competency of medical graduates, as perceived by the graduates themselves and by the experts. Methods This is a hospital based cross-sectional study. It covered 105 medical graduates and 63 experts selected by convenient sampling method. A self-administered questionnaire covering the different areas of clinical competency constructed on a five-point Likert scale was used for data collection. Data processing and analysis were performed using the Statistical Package for Social Science (SPSS) 16.0. The mean, frequency distribution, and percentage of the variables were calculated. A non-parametric Kruskal Wallis test was applied to verify whether the graduates' and experts' assessments were influenced by the graduates' variables such as age, gender, experience, type of hospital, specialty and location of work at a (p ≤ 0.05) level of significance. Results The overall mean scores for experts' and graduates' assessments were 3.40 and 3.63, respectively (p= 0.035). Almost 87% of the graduates perceived their competency as good and very good in comparison with only 67.7% by experts. Female and male graduates who rated themselves as very good were 33.8% and 25% respectively. More than 19% of the graduates in the age group > 30 years perceived their clinical competency as inadequate in contrast with only 6.2% of the graduates in the youngest age group. Experts rated 40% of the female graduates as inadequate versus 20% of males, (p= 0.04). More than 40% of the graduates in younger age group were rated by experts as inadequate, versus 9.7% of the higher age group >30 years (p = 0.03). Conclusion There was a wide discrepancy between the graduates' self-assessment and experts' assessment, particularly in the level

  7. Dissipative Prototyping Methods: A Manifesto

    Science.gov (United States)

    Beesley, P.

    Taking a designer's unique perspective using examples of practice in experimental installation and digital protoyping, this manifesto acts as provocation for change and unlocking new potential by encouraging changes of perspective about the material realm. Diffusive form-language is proposed as a paradigm for architectural design. This method of design is applied through 3D printing and related digital fabrication methods, offering new qualities that can be implemented in design of realms including present earth and future interplanetary environments. A paradigm shift is encouraged by questioning conventional notions of geometry that minimize interfaces and by proposing the alternatives of maximized interfaces formed by effusive kinds of formal composition. A series of projects from the Canadian research studio of the Hylozoic Architecture group are described, providing examples of component design methods employing diffusive forms within combinations of tension-integrity structural systems integrated with hybrid metabolisms employing synthetic biology. Cultural implications are also discussed, drawing from architectural theory and natural philosophy. The conclusion of this paper suggests that the practice of diffusive prototyping can offer formative strategies contributing to design of future living systems.

  8. A French fuel cell prototype

    International Nuclear Information System (INIS)

    Anon.

    2001-01-01

    A French prototype of a fuel cell based on the PEM (proton exchange membrane) technology has been designed by Helion, a branch of Technicatome, this fuel cell delivers 300 kW and will be used in naval applications and terrestrial transport. The main advantages of fuel cell are: 1) no contamination, even if the fuel used is natural gas the quantities of CO 2 and CO emitted are respectively 17 and 75 times as little as the maximal quantities allowed by European regulations, 2) efficiency, the electric yield is up to 60 % and can reach 80 % if we include the recovery of heat, 3) silent, the fuel cell itself does not make noise. The present price of fuel cell is the main reason that hampers its industrial development, this price is in fact strongly dependant on the cost of its different components: catalyzers, membranes, bipolar plates and the hydrogen supply. This article gives the technical characteristics of the Helion's fuel cell. (A.C.)

  9. Wireless Augmented Reality Prototype (WARP)

    Science.gov (United States)

    Devereaux, A. S.

    1999-01-01

    Initiated in January, 1997, under NASA's Office of Life and Microgravity Sciences and Applications, the Wireless Augmented Reality Prototype (WARP) is a means to leverage recent advances in communications, displays, imaging sensors, biosensors, voice recognition and microelectronics to develop a hands-free, tetherless system capable of real-time personal display and control of computer system resources. Using WARP, an astronaut may efficiently operate and monitor any computer-controllable activity inside or outside the vehicle or station. The WARP concept is a lightweight, unobtrusive heads-up display with a wireless wearable control unit. Connectivity to the external system is achieved through a high-rate radio link from the WARP personal unit to a base station unit installed into any system PC. The radio link has been specially engineered to operate within the high- interference, high-multipath environment of a space shuttle or space station module. Through this virtual terminal, the astronaut will be able to view and manipulate imagery, text or video, using voice commands to control the terminal operations. WARP's hands-free access to computer-based instruction texts, diagrams and checklists replaces juggling manuals and clipboards, and tetherless computer system access allows free motion throughout a cabin while monitoring and operating equipment.

  10. Virtual Video Prototyping of Pervasive Healthcare Systems

    DEFF Research Database (Denmark)

    Bardram, Jakob Eyvind; Bossen, Claus; Madsen, Kim Halskov

    2002-01-01

    Virtual studio technology enables the mixing of physical and digital 3D objects and thus expands the way of representing design ideas in terms of virtual video prototypes, which offers new possibilities for designers by combining elements of prototypes, mock-ups, scenarios, and conventional video....... In this article we report our initial experience in the domain of pervasive healthcare with producing virtual video prototypes and using them in a design workshop. Our experience has been predominantly favourable. The production of a virtual video prototype forces the designers to decide very concrete design...... issues, since one cannot avoid paying attention to the physical, real-world constraints and to details in the usage-interaction between users and technology. From the users' perspective, during our evaluation of the virtual video prototype, we experienced how it enabled users to relate...

  11. Virtual Video Prototyping for Healthcare Systems

    DEFF Research Database (Denmark)

    Bardram, Jakob Eyvind; Bossen, Claus; Lykke-Olesen, Andreas

    2002-01-01

    Virtual studio technology enables the mixing of physical and digital 3D objects and thus expands the way of representing design ideas in terms of virtual video prototypes, which offers new possibilities for designers by combining elements of prototypes, mock-ups, scenarios, and conventional video....... In this article we report our initial experience in the domain of pervasive healthcare with producing virtual video prototypes and using them in a design workshop. Our experience has been predominantly favourable. The production of a virtual video prototype forces the designers to decide very concrete design...... issues, since one cannot avoid paying attention to the physical, real-world constraints and to details in the usage-interaction between users and technology. From the users' perspective, during our evaluation of the virtual video prototype, we experienced how it enabled users to relate...

  12. High confidence in falsely recognizing prototypical faces.

    Science.gov (United States)

    Sampaio, Cristina; Reinke, Victoria; Mathews, Jeffrey; Swart, Alexandra; Wallinger, Stephen

    2018-06-01

    We applied a metacognitive approach to investigate confidence in recognition of prototypical faces. Participants were presented with sets of faces constructed digitally as deviations from prototype/base faces. Participants were then tested with a simple recognition task (Experiment 1) or a multiple-choice task (Experiment 2) for old and new items plus new prototypes, and they showed a high rate of confident false alarms to the prototypes. Confidence and accuracy relationship in this face recognition paradigm was found to be positive for standard items but negative for the prototypes; thus, it was contingent on the nature of the items used. The data have implications for lineups that employ match-to-suspect strategies.

  13. New graduate nurses in transition

    DEFF Research Database (Denmark)

    Tingleff, Ellen Boldrup; Gildberg, Frederik Alkier

    2014-01-01

    was to review existing research literature, and in doing so, investigate transition programmes for new graduate nurses (NGN) into mental health care, and their experiences of role transition and evaluations of participation in transition programmes. The literature review spans literature published after...... the year 2000. The literature search was conducted using the following databases: CINAHL, Psychology and Behavioral Sciences Collection, PsycINFO, and Pubmed. Search results consisting of 14 articles were analysed using thematic analysis. Results from the analysis showed four overall themes: nursing...

  14. Employability of Nursing Care Graduates

    Directory of Open Access Journals (Sweden)

    Donik Barbara

    2015-12-01

    Full Text Available Starting points: In Slovenia, the higher education institution for nursing started exploring employability opportunities in nursing care in connection with the achievement of competencies from students’ and employers’ point of view. This article highlights the importance of monitoring nursing graduates’ employability. Its aim is to examine the employability of nursing care graduates based on the self-evaluation of competences obtained during the last study year and to establish a link between the self-evaluation of competences and students’ academic performance.

  15. From students to researchers: The education of physics graduate students

    Science.gov (United States)

    Lin, Yuhfen

    This dissertation aims to make two research contributions: (1) In physics education research, this work aims to advance our understanding of physics student learning at the graduate level. This work attempts to better understand how physics researchers and teachers are produced, and what factors support or encourage the process of becoming a researcher and a teacher. (2) In cognitive science research in the domain of expert/novice differences, researchers are interested in defining and understanding what expertise is. This work aims to provide some insight into some of the components of expertise that go into becoming a competent expert researcher in the domain of physics. This in turn may contribute to our general understanding of expertise across multiple domains. Physics graduate students learn in their classes as students, teach as teaching assistants, and do research with research group as apprentices. They are expected to transition from students to independent researchers and teachers. The three activities of learning, teaching, and research appear to be very different and demand very different skill-sets. In reality, these activities are interrelated and have subtle effects on each other. Understanding how students transition from students to researchers and teachers is important both to PER and physics in general. In physics, an understanding of how physics students become researchers may help us to keep on training physicists who will further advance our understanding of physics. In PER, an understanding of how graduate students learn to teach will help us to train better physics teachers for the future. In this dissertation, I examine physics graduate students' approaches to teaching, learning, and research through semi-structured interviews. The collected data is interpreted and analyzed through a framework that focuses on students' epistemological beliefs and locus of authority. The data show how students' beliefs about knowledge interact with their

  16. Flexible prototype of modular multilevel converters for experimental verification of DC transmission and multiterminal systems

    DEFF Research Database (Denmark)

    Konstantinou, Georgios; Ceballos, Salvador; Gabiola, Igor

    2017-01-01

    Testing and verification of high-level and low-level control, modulation, fault handling and converter co-ordination for modular multilevel converters (MMCs) requires development of experimental prototype converters. In this paper, we provide a a complete overview of the MMC-based experimental...... prototype at UNSW Sydney (The University of New South Wales) including the structure of the sub-modules, communication, control and protection functions as well as the possible configurations of the system. The prototype, rated at a dc voltage of up to 800 V and power of 20 kVA and can be used to study...

  17. Promoting active learning of graduate student by deep reading in biochemistry and microbiology pharmacy curriculum.

    Science.gov (United States)

    Peng, Ren

    2017-07-08

    To promote graduate students' active learning, deep reading of high quality papers was done by graduate students enrolled in biochemistry and microbiology pharmacy curriculum offered by college of life science, Jiangxi Normal University from 2013 to 2015. The number of graduate students, who participated in the course in 2013, 2014, and 2015 were eleven, thirteen and fifteen, respectively. Through deep reading of papers, presentation, and group discussion in the lecture, these graduate students have improved their academic performances effectively, such as literature search, PPT document production, presentation management, specialty document reading, academic inquiry, and analytical and comprehensive ability. The graduate students also have increased their understanding level of frontier research, scientific research methods, and experimental methods. © 2017 by The International Union of Biochemistry and Molecular Biology, 45(4):305-312, 2017. © 2017 The International Union of Biochemistry and Molecular Biology.

  18. Prototypical versus contemporary Mediterranean Diet.

    Science.gov (United States)

    Rizza, W; De Gara, L; Antonelli Incalzi, R; Pedone, C

    2016-10-01

    To investigate the evolution of the Mediterranean Diet (MD) in a delimited area of Southern Italy, by comparing the diet adopted 60-70 years ago (Prototypical Mediterranean Diet, PMD) with the contemporary one (Contemporary Mediterranean Diet, CMD), and to verify to what extent they fitted the recommendations of the Italian and the USDA dietary guidelines. We recruited a total of 106 participants, divided in two groups. PMD group included 52 women aged >80 years, with a good cognitive function and full independence in basic and instrumental activities of daily living. CMD group included 20 men and 34 women aged 50-60 years. Food intake was assessed by administering the EPIC food frequency questionnaire to each participant, and an additional survey to the PMD subjects only. Both PMD and CMD showed adequate intakes of macronutrients, although some deficiencies related to micronutrient requirements were evident. CMD showed a slightly greater use of animal products, processed and sugary foods, and higher intakes of simple sugars, animal proteins (49.6 vs 28.3 g/day), animal lipids (37.8 vs 20.1 g/day), saturated fats (25.0 vs 15.8 g/day) and cholesterol (305.0 vs 258.5 g/day). PMD showed many similarities to the original version of the MD in terms of macronutrients distribution and food choices. The documented evolution of the dietary habits over a 70 years timespan suggests that nowadays Mediterranean regions adhere less strictly to the original MD, although nutrients intakes are adequate to LARN and USDA recommendations. Copyright © 2016 European Society for Clinical Nutrition and Metabolism. Published by Elsevier Ltd. All rights reserved.

  19. Adolescents, Graduated Autonomy, and Genetic Testing

    Directory of Open Access Journals (Sweden)

    Susan Fox

    2012-01-01

    Full Text Available Autonomy takes many shapes. The concept of “graduated autonomy” is conceived as comprising several unique features: (1 it is incremental, (2 it is proportional, and (3 it is related to the telos of the life stage during which it occurs. This paper focuses on graduated autonomy in the context of genetic testing during adolescence. Questions can be raised about other life stages as well, and some of these questions will be addressed by discussing a possible fourth characteristic of graduated autonomy, that is, its elasticity. Further scholarship and analysis is needed to refine the concept of graduated autonomy and examine its applications.

  20. Graduates perception towards instructional methods of emergency ...

    African Journals Online (AJOL)

    Graduates perception towards instructional methods of emergency medicine: affecting their self-confidence in emergency departments. Mohamed Daffalla Awadalla, Ahmed Abd Elrahman Abdalla, Sami Mahjoub Taha ...

  1. Undergraduate grade point average and graduate record examination scores: the experience of one graduate nursing program.

    Science.gov (United States)

    Newton, Sarah E; Moore, Gary

    2007-01-01

    Graduate nursing programs frequently use undergraduate grade point average (UGPA) and Graduate Record Examination (GRE) scores for admission decisions. The literature indicates that both UGPA and GRE scores are predictive of graduate school success, but that UGPA may be the better predictor. If that is so, one must ask if both are necessary for graduate nursing admission decisions. This article presents research on one graduate nursing program's experience with UGPA and GRE scores and offers a perspective regarding their continued usefulness for graduate admission decisions. Data from 120 graduate students were examined, and regression analysis indicated that UGPA significantly predicted GRE verbal and quantitative scores (p < .05). Regression analysis also determined a UGPA score above which the GRE provided little additional useful data for graduate nursing admission decisions.

  2. A population study comparing screening performance of prototypes for depression and anxiety with standard scales

    Directory of Open Access Journals (Sweden)

    Christensen Helen

    2011-11-01

    Full Text Available Abstract Background Screening instruments for mental disorders need to be short, engaging, and valid. Current screening instruments are usually questionnaire-based and may be opaque to the user. A prototype approach where individuals identify with a description of an individual with typical symptoms of depression, anxiety, social phobia or panic may be a shorter, faster and more acceptable method for screening. The aim of the study was to evaluate the accuracy of four new prototype screeners for predicting depression and anxiety disorders and to compare their performance with existing scales. Methods Short and ultra-short prototypes were developed for Major Depressive Disorder (MDD, Generalised Anxiety Disorder (GAD, Panic Disorder (PD and Social Phobia (SP. Prototypes were compared to typical short and ultra-short self-report screening scales, such as the Centre for Epidemiology Scale, CES-D and the GAD-7, and their short forms. The Mini International Neuropsychiatric Interview (MINI version 6 1 was used as the gold standard for obtaining clinical criteria through a telephone interview. From a population sample, 225 individuals who endorsed a prototype and 101 who did not were administered the MINI. Receiver operating characteristic (ROC curves were plotted for the short and ultra short prototypes and for the short and ultra short screening scales. Results The study found that the rates of endorsement of the prototypes were commensurate with prevalence estimates. The short-form and ultra short scales outperformed the short and ultra short prototypes for every disorder except GAD, where the GAD prototype outperformed the GAD 7. Conclusions The findings suggest that people may be able to self-identify generalised anxiety more accurately than depression based on a description of a prototypical case. However, levels of identification were lower than expected. Considerable benefits from this method of screening may ensue if our prototypes can be

  3. Prototype-Incorporated Emotional Neural Network.

    Science.gov (United States)

    Oyedotun, Oyebade K; Khashman, Adnan

    2017-08-15

    Artificial neural networks (ANNs) aim to simulate the biological neural activities. Interestingly, many ''engineering'' prospects in ANN have relied on motivations from cognition and psychology studies. So far, two important learning theories that have been subject of active research are the prototype and adaptive learning theories. The learning rules employed for ANNs can be related to adaptive learning theory, where several examples of the different classes in a task are supplied to the network for adjusting internal parameters. Conversely, the prototype-learning theory uses prototypes (representative examples); usually, one prototype per class of the different classes contained in the task. These prototypes are supplied for systematic matching with new examples so that class association can be achieved. In this paper, we propose and implement a novel neural network algorithm based on modifying the emotional neural network (EmNN) model to unify the prototype- and adaptive-learning theories. We refer to our new model as ``prototype-incorporated EmNN''. Furthermore, we apply the proposed model to two real-life challenging tasks, namely, static hand-gesture recognition and face recognition, and compare the result to those obtained using the popular back-propagation neural network (BPNN), emotional BPNN (EmNN), deep networks, an exemplar classification model, and k-nearest neighbor.

  4. Rapid prototyping and stereolithography in dentistry

    Science.gov (United States)

    Nayar, Sanjna; Bhuminathan, S.; Bhat, Wasim Manzoor

    2015-01-01

    The word rapid prototyping (RP) was first used in mechanical engineering field in the early 1980s to describe the act of producing a prototype, a unique product, the first product, or a reference model. In the past, prototypes were handmade by sculpting or casting, and their fabrication demanded a long time. Any and every prototype should undergo evaluation, correction of defects, and approval before the beginning of its mass or large scale production. Prototypes may also be used for specific or restricted purposes, in which case they are usually called a preseries model. With the development of information technology, three-dimensional models can be devised and built based on virtual prototypes. Computers can now be used to create accurately detailed projects that can be assessed from different perspectives in a process known as computer aided design (CAD). To materialize virtual objects using CAD, a computer aided manufacture (CAM) process has been developed. To transform a virtual file into a real object, CAM operates using a machine connected to a computer, similar to a printer or peripheral device. In 1987, Brix and Lambrecht used, for the first time, a prototype in health care. It was a three-dimensional model manufactured using a computer numerical control device, a type of machine that was the predecessor of RP. In 1991, human anatomy models produced with a technology called stereolithography were first used in a maxillofacial surgery clinic in Viena. PMID:26015715

  5. Rapid prototyping and stereolithography in dentistry.

    Science.gov (United States)

    Nayar, Sanjna; Bhuminathan, S; Bhat, Wasim Manzoor

    2015-04-01

    The word rapid prototyping (RP) was first used in mechanical engineering field in the early 1980s to describe the act of producing a prototype, a unique product, the first product, or a reference model. In the past, prototypes were handmade by sculpting or casting, and their fabrication demanded a long time. Any and every prototype should undergo evaluation, correction of defects, and approval before the beginning of its mass or large scale production. Prototypes may also be used for specific or restricted purposes, in which case they are usually called a preseries model. With the development of information technology, three-dimensional models can be devised and built based on virtual prototypes. Computers can now be used to create accurately detailed projects that can be assessed from different perspectives in a process known as computer aided design (CAD). To materialize virtual objects using CAD, a computer aided manufacture (CAM) process has been developed. To transform a virtual file into a real object, CAM operates using a machine connected to a computer, similar to a printer or peripheral device. In 1987, Brix and Lambrecht used, for the first time, a prototype in health care. It was a three-dimensional model manufactured using a computer numerical control device, a type of machine that was the predecessor of RP. In 1991, human anatomy models produced with a technology called stereolithography were first used in a maxillofacial surgery clinic in Viena.

  6. Review on CNC-Rapid Prototyping

    International Nuclear Information System (INIS)

    M Nafis O Z; Nafrizuan M Y; Munira M A; Kartina J

    2012-01-01

    This article reviewed developments of Computerized Numerical Control (CNC) technology in rapid prototyping process. Rapid prototyping (RP) can be classified into three major groups; subtractive, additive and virtual. CNC rapid prototyping is grouped under the subtractive category which involves material removal from the workpiece that is larger than the final part. Richard Wysk established the use of CNC machines for rapid prototyping using sets of 2½-D tool paths from various orientations about a rotary axis to machine parts without refixturing. Since then, there are few developments on this process mainly aimed to optimized the operation and increase the process capabilities to stand equal with common additive type of RP. These developments include the integration between machining and deposition process (hybrid RP), adoption of RP to the conventional machine and optimization of the CNC rapid prototyping process based on controlled parameters. The article ended by concluding that the CNC rapid prototyping research area has a vast space for improvement as in the conventional machining processes. Further developments and findings will enhance the usage of this method and minimize the limitation of current approach in building a prototype.

  7. The prototype triggerless data acquisition of the PANDA experiment

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, Milan; Reiter, Simon; Lange, Soeren; Kuehn, Wolfgang [II. Physikalisches Institut, Giessen Univ. (Germany); Collaboration: PANDA-Collaboration

    2016-07-01

    The PANDA detector will operate with a very high interaction rate of up to 20 MHz, in a free streaming mode without hardware trigger. Data filtering will be performed by complete online event reconstruction with a highly parallelized farm of FPGAs as first level and on a farm of GPUs or PCs as a second level. The requirement is a background reduction by a factor of >1000. A prototype trigger-less data acquisition (PTDAQ) system for the detector validation measurements comprises free streaming and synchronization readout, for event building and filtering has been developed. A first in beam environment test was performed at the Mainzer Mikrotron, reading out the barrel electromagnetic calorimeter prototype (Proto120).

  8. Classroom to Clinic: Merging Education and Research to Efficiently Prototype Medical Devices.

    Science.gov (United States)

    Hanumara, Nevan C; Begg, Nikolai D; Walsh, Conor; Custer, David; Gupta, Rajiv; Osborn, Lynn R; Slocum, Alexander H

    2013-01-01

    Innovation in patient care requires both clinical and technical skills, and this paper presents the methods and outcomes of a nine-year, clinical-academic collaboration to develop and evaluate new medical device technologies, while teaching mechanical engineering. Together, over the course of a single semester, seniors, graduate students, and clinicians conceive, design, build, and test proof-of-concept prototypes. Projects initiated in the course have generated intellectual property and peer-reviewed publications, stimulated further research, furthered student and clinician careers, and resulted in technology licenses and start-up ventures.

  9. Evaluation of a prototype infrasound system

    International Nuclear Information System (INIS)

    Whitaker, R.; Sandoval, T.; Breding, D.; Kromer, D.

    1997-01-01

    Under Department of Energy sponsorship, Sandia National Laboratories and Los Alamos National Laboratory cooperated to develop a prototype infrasonic array, with associated documentation, that could be used as part of the International Monitoring System. The United States Government or foreign countries could procure commercially available systems based on this prototype to fulfill their Comprehensive Test Ban Treaty (CTBT) obligations. The prototype is a four-element array in a triangular layout as recommended in CD/NTB/WP.224 with an element at each corner and one in the center. The prototype test configuration utilize an array spacing of 1 km. The prototype infrasound system has the following objectives: (1) Provide a prototype that reliably acquires and transmits near real-time infrasonic data to facilitate the rapid location and identification of atmospheric events. (2) Provide documentation that could be used by the United States and foreign countries to procure infrasound systems commercially to fulfill their CTBT responsibilities. Infrasonic monitoring is an effective, low cost technology for detecting atmospheric explosions. The low frequency components of explosion signals propagate to long ranges (few thousand kilometers) where they can be detected with an array of sensors. Los Alamos National Laboratory's expertise in infrasound systems and phenomenology when combined with Sandia's expertise in providing verification quality system for treaty monitoring make an excellent team to provide the prototype infrasound sensor system. By September 1997, the prototype infrasound system will have been procured, integrated, evaluated and documented. Final documentation will include a system requirements document, an evaluation report and a hardware design document. The hardware design document will describe the various hardware components used in the infrasound prototype and their interrelationships

  10. The relationship of high school graduation exams to graduation rates and SAT scores.

    OpenAIRE

    Gregory J. Marchant; Sharon E. Paulson

    2005-01-01

    The current study examined the effect of high school graduation exams on states' graduation rates, states' aggregated SAT scores, and individual students' SAT scores. Three data sources were used: One source identified states requiring a standardized test for graduation; the NCES provided state aggregated data on graduation rates for the class of 2002; and the College Board provided its 2001 SAT database for all test-takers. After controlling for students' demographic characteristics (e.g., r...

  11. Master’s Degree Programs of Camarines Norte State College, Philippines: Impact on Its Graduates

    Directory of Open Access Journals (Sweden)

    Godofredo E. Peteza, Jr.

    2017-02-01

    Full Text Available This research determined the impact of the master’s degree programs offered in the Graduate School such as Master in Business Administration, Master in Public Administration, Master in Management majors in Human Resource Management and Educational Planning and Management on its graduates from 2009 to 2013. Descriptive-survey method supplemented by interview was employed to identify specifically the profile of the graduates of master’s degree programs in terms of age, sex, civil status, level of appointment before and after taking the master’s degree program, monthly income before and after taking the master’s degree program, number of promotions after graduation, and years in service and the impact of the CNSC Graduate School’s Master’s Degree Programs along professional practice, career development; and employment. Results show that majority of the respondents are in the middle age from 31 -37 years old, married, mostly females, 6-10 years in service and have one promotion after they have graduated from their respective master’s degrees. The level of appointment of the respondents has a positive movement from rank and file to supervisory and managerial levels positions. The Graduate School’s Master’s degree programs provided high impact on the graduates’ professional practice, and on employment while average impact on career development.

  12. Eight years' operation of the SGHWR prototype

    International Nuclear Information System (INIS)

    Phillips, J.L.

    1976-01-01

    Experience gained of the SGHWR system during the first eight years of operation of the UKAEA's 100 MW(e) prototype at AEE Winfrith is discussed. Modifications and additions have been made to the plant to overcome problems which only operation of a prototype unit can reveal. No problems have arisen which could not be overcome by the application of normal engineering resources, and there is no reason why the commercial successor to the prototype should be other than a fully viable proposition. (author)

  13. Field Data Logger Prototype for Power Converters

    DEFF Research Database (Denmark)

    Chaudhary, Sanjay; Ghimire, Pramod; Thøgersen, Paul Bach

    2014-01-01

    and subsequent analysis of the data. This paper presents the development of a low cost prototype field data logger prototype using Raspberry PI and industrial sensors. The functionalities of the data logger prototype are described. An online rainflow count algorithm has been implemented as well.......Mission profile data is very important for the cost effective and reliable design of power converters. The converter design can be improved on the basis of actual field data. Actual mission profile data can be collected for the power converters using field data loggers over a long period of time...

  14. NIF/LMJ prototype amplifier mechanical design

    International Nuclear Information System (INIS)

    Horvath, J.

    1996-10-01

    Amplifier prototypes for the National Ignition Facility and the Laser Megajoule will be tested at Lawrence Livermore National Laboratory. The prototype amplifier, which is an ensemble of modules from LLNL and Centre d'Etudes de Limeil-Valenton, is cassette-based with bottom access for maintenance. A sealed maintenance transfer vehicle which moves optical cassettes between the amplifier and the assembly cleanroom, and a vacuum gripper which holds laser slabs during cassette assembly will also be tested. The prototype amplifier will be used to verify amplifier optical performance, thermal recovery time, and cleanliness of mechanical operations

  15. Rapid prototyping using robot welding : process description

    OpenAIRE

    Ribeiro, António Fernando; Norrish, John

    1997-01-01

    Rapid Prototyping is a relatively recent technique to produce component prototypes for industry in a much shorter period of time, since the time to market a product is essential to its success. A new Rapid Prototyping process which uses metal as the raw material had been under development at Cranfield University in the last few years. The process uses a Gas Metal Arc fusion welding robot which deposits successive layers of metal in such way that it forms a 3D solid component. Firstly, a CAD s...

  16. Initial performance of the PIGMI prototype

    International Nuclear Information System (INIS)

    Stovall, J.E.

    1979-01-01

    The PIGMI (Pion Generator for Medical Irradiations) program at LASL is an accelerator development program aimed at completing the design of an accelerator suitable for use as a pion generator in a hospital-based radiotherapy program. The major thrust of the program has been the design of a 7 MeV prototype accelerator which emphasizes compactness, economy of construction, and operation and reliability. To achieve these goals the design of the prototype has exploited a number of innovations in proton linac technology. An overview of the program discussing the major innovative features of the prototype is presented. The initial operating experience is discussed and initial performance measurements are presented

  17. [Rapid prototyping: a very promising method].

    Science.gov (United States)

    Haverman, T M; Karagozoglu, K H; Prins, H-J; Schulten, E A J M; Forouzanfar, T

    2013-03-01

    Rapid prototyping is a method which makes it possible to produce a three-dimensional model based on two-dimensional imaging. Various rapid prototyping methods are available for modelling, such as stereolithography, selective laser sintering, direct laser metal sintering, two-photon polymerization, laminated object manufacturing, three-dimensional printing, three-dimensional plotting, polyjet inkjet technology,fused deposition modelling, vacuum casting and milling. The various methods currently being used in the biomedical sector differ in production, materials and properties of the three-dimensional model which is produced. Rapid prototyping is mainly usedforpreoperative planning, simulation, education, and research into and development of bioengineering possibilities.

  18. Graduate Attributes and Employability Skills: Graduates' Perspectives on Employers' Expectations in Oman

    Science.gov (United States)

    Belwal, Rakesh; Priyadarshi, Pushpendra; Al Fazari, Mariam Humaid

    2017-01-01

    Purpose: Supply and demand characteristics, influenced by the pre- and post-oil economy of Oman, have caused unemployment challenges to Omani graduates. The purpose of this paper is to explore the most common graduate attributes as they apply to graduates' employability in Oman. Design/methodology/approach: The study uses the principles of…

  19. Those Who Graduate: A Brief Look at the UNO Graduating Class of 1986.

    Science.gov (United States)

    Crawford, A. E.

    1989-01-01

    The University of Nebraska at Omaha (UNO) conducted a study of 1,358 bachelor's degree graduates of the class of 1986 to examine two factors: (1) age at entrance and graduation, and (2) length of time required for graduation from several specified beginning points. The study required four sets of data: demographic, age related data, time-frame…

  20. Earnings Expectation and Graduate Employment: Evidence from Recent Chinese College Graduates

    Science.gov (United States)

    Po, Yang

    2011-01-01

    Chinese college graduates have faced increasing labor market competition since the expansion of tertiary education. Given rigid market demand, graduates with realistic earnings expectations may experience a more efficient job search. Using the 2008 MYCOS College Graduate Employment Survey, this study finds that a 1000 yuan reduction in a…

  1. Your Graduates and You: Effective Strategies for Graduate Recruitment and Development. IES Report.

    Science.gov (United States)

    Connor, H.; Hirsh, W.; Barber, L.

    Many employing organizations in the United Kingdom and elsewhere are finding it increasingly important to have an effective strategy for recruiting and developing higher education graduates. Numerous external and internal factors affect employers' graduate recruitment and development strategies. The following main approaches to graduates' entry…

  2. VO for Education: Archive Prototype

    Science.gov (United States)

    Ramella, M.; Iafrate, G.; De Marco, M.; Molinaro, M.; Knapic, C.; Smareglia, R.; Cepparo, F.

    2014-05-01

    The number of remote control telescopes dedicated to education is increasing in many countries, leading to correspondingly larger and larger amount of stored educational data that are usually available only to local observers. Here we present the project for a new infrastructure that will allow teachers using educational telescopes to archive their data and easily publish them within the Virtual Observatory (VO) avoiding the complexity of professional tools. Students and teachers anywhere will be able to access these data with obvious benefits for the realization of grander scale collaborative projects. Educational VO data will also be an important resource for teachers not having direct access to any educational telescopes. We will use the educational telescope at our observatory in Trieste as a prototype for the future VO educational data archive resource. The publishing infrastructure will include: user authentication, content and curation validation, data validation and ingestion, VO compliant resource generation. All of these parts will be performed by means of server side applications accessible through a web graphical user interface (web GUI). Apart from user registration, that will be validated by a natural person responsible for the archive (after having verified the reliability of the user and inspected one or more test files), all the subsequent steps will be automated. This means that at the very first data submission through the webGUI, a complete resource including archive and published VO service will be generated, ready to be registered to the VO. The efforts required to the registered user will consist only in describing herself/himself at registration step and submitting the data she/he selects for publishing after each observation sessions. The infrastructure will be file format independent and the underlying data model will use a minimal set of standard VO keywords, some of which will be specific for outreach and education, possibly including VO

  3. DOE/PSU Graduate Student Fellowship Program for Hydropower

    Energy Technology Data Exchange (ETDEWEB)

    Cimbala, John M. [Pennsylvania State Univ., State College, PA (United States)

    2014-03-30

    The primary objective of this project is to stimulate academic interest in the conventional hydropower field by supplying research support for at least eight individual Master of Science (MS) or Doctoral (PhD) level research projects, each consisting of a graduate student supervised by a faculty member. We have completed many of the individual student research projects: 2 PhD students have finished, and 4 are still working towards their PhD degree. 4 MS students have finished, and 2 are still working towards their MS degree, one of which is due to finish this April. In addition, 4 undergraduate student projects have been completed, and one is to be completed this April. These projects were supervised by 7 faculty members and an Advisory/Review Panel. Our students and faculty have presented their work at national or international conferences and have submitted several journal publications. Three of our graduate students (Keith Martin, Dan Leonard and Hosein Foroutan) have received HRF Fellowships during the course of this project. All of the remaining students are anticipated to be graduated by the end of Fall Semester 2014. All of the tasks for this project will have been completed once all the students have been graduated, although it will be another year or two until all the journal publications have been finalized based on the work performed as part of this DOE Hydropower project.

  4. Prototype models for the MOIRA computerised system

    Energy Technology Data Exchange (ETDEWEB)

    Monte, Luigi [ENEA, Centro Ricerche Casaccia, Rome (Italy). Dipt. Ambiente; Hakanson, Lars [Uppsala, Univ. (Sweden). Institute of Earth Sciences; Brittain, John [Oslo, Univ. (Norway). Zoological Museum

    1997-06-01

    The main aim of the present report is to describe selected models and the principles of the Decision Analysis theory that will be applied to develop the model-based computerised system `MOIRA`. A dose model and a model for predicting radiocaesium migration in lakes and the effects of countermeasures to reduce the contamination levels in the components of lacustrine system are described in detail. The principles for developing prototype models for predicting the migration of {sup 90}Sr in lake abiotic and biotic components are discussed. The environmental models described in the report are based on the use of `collective parameters` which due to mutual compensation effects of different phenomena occurring in complex systems, show low variability when the environmental conditions change. Use of such `collective parameters` not only increases the predictive power of the models, but also increases the practical applicability of the model. Among the main results described in the report, the development of an objective hierarchy table for evaluating the effectiveness of a countermeasure when the economic, social and ecological impacts are accounted for, deserves special attention.

  5. User prototypes as partly unconscious communication

    DEFF Research Database (Denmark)

    Glasemann, Marie; Kanstrup, Anne Marie

    2010-01-01

    In this paper, we introduce user prototypes as a technique that supports users’ articulation of emotions relevant for design: dreams, fears, motivations – their feelings and aspirations. Following Bateson’s writings about communication through art, we consider user prototypes as “partly unconscious...... communication” and propose to analyze them by focusing on the emotional articulations integrated in the users’ design language. We illustrate this with an example from a design research project on designing learning technology for young diabetics. The example shows how young people with diabetes can express...... emotional themes related to youth identity, the burden of being young with a chronic illness, and the need to be connected and feel safe through design of prototypes. The new conceptual space that arises from user prototypes shows potential for addressing emotions when designing for health and for further...

  6. Homogeneity of Prototypical Attributes in Soccer Teams

    Directory of Open Access Journals (Sweden)

    Christian Zepp

    2015-09-01

    Full Text Available Research indicates that the homogeneous perception of prototypical attributes influences several intragroup processes. The aim of the present study was to describe the homogeneous perception of the prototype and to identify specific prototypical subcategories, which are perceived as homogeneous within sport teams. The sample consists of N = 20 soccer teams with a total of N = 278 athletes (age M = 23.5 years, SD = 5.0 years. The results reveal that subcategories describing the cohesiveness of the team and motivational attributes are mentioned homogeneously within sport teams. In addition, gender, identification, team size, and the championship ranking significantly correlate with the homogeneous perception of prototypical attributes. The results are discussed on the basis of theoretical and practical implications.

  7. Norcal Prototype LNG Truck Fleet: Final Results

    Energy Technology Data Exchange (ETDEWEB)

    2004-07-01

    U.S. DOE and National Renewable Energy Laboratory evaluated Norcal Waste Systems liquefied natural gas (LNG) waste transfer trucks. Trucks had prototype Cummins Westport ISXG engines. Report gives final evaluation results.

  8. Gesture recognition for an exergame prototype

    NARCIS (Netherlands)

    Gacem, Brahim; Vergouw, Robert; Verbiest, Harm; Cicek, Emrullah; Kröse, Ben; van Oosterhout, Tim; Bakkes, S.C.J.

    2011-01-01

    We will demonstrate a prototype exergame aimed at the serious domain of elderly fitness. The exergame incorporates straightforward means to gesture recognition, and utilises a Kinect camera to obtain 2.5D sensory data of the human user.

  9. Power test for first prototype LIBO module

    CERN Multimedia

    Laurent Guiraud

    2000-01-01

    The Linac Booster (LIBO) is a prototype machine for producing particle beams for cancer therapy. Hadron therapy techniques are able to reach deep tumours with less damage to surrounding tissue than with conventional radiotherapy.

  10. An Empirical Investigation of Architectural Prototyping

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2010-01-01

    Architectural prototyping is the process of using executable code to investigate stakeholders’ software architecture concerns with respect to a system under development. Previous work has established this as a useful and cost-effective way of exploration and learning of the design space of a system...... and in addressing issues regarding quality attributes, architectural risks, and the problem of knowledge transfer and conformance. However, the actual industrial use of architectural prototyping has not been thoroughly researched so far. In this article, we report from three studies of architectural prototyping...... in practice. First, we report findings from an ethnographic study of practicing software architects. Secondly, we report from a focus group on architectural prototyping involving architects from four companies. And, thirdly, we report from a survey study of 20 practicing software architects and software...

  11. Presentation Trainer Prototype 1.0

    NARCIS (Netherlands)

    Börner, Dirk; Specht, Marcus

    2014-01-01

    This software sketch comprises the first prototype of the presentation trainer. The application uses the Microsoft Kinect sensor and was built using the Processing 1.5.1 development environment. Available under the GNU LGPL licence version 3 or higher.

  12. Recruit Fitness as a Predictor of Police Academy Graduation.

    Science.gov (United States)

    Shusko, M; Benedetti, L; Korre, M; Eshleman, E J; Farioli, A; Christophi, C A; Kales, S N

    2017-10-01

    Suboptimal recruit fitness may be a risk factor for poor performance, injury, illness, and lost time during police academy training. To assess the probability of successful completion and graduation from a police academy as a function of recruits' baseline fitness levels at the time of academy entry. Retrospective study where all available records from recruit training courses held (2006-2012) at all Massachusetts municipal police academies were reviewed and analysed. Entry fitness levels were quantified from the following measures, as recorded at the start of each training class: body composition, push-ups, sit-ups, sit-and-reach, and 1.5-mile run-time. The primary outcome of interest was the odds of not successfully graduating from an academy. We used generalized linear mixed models in order to fit logistic regression models with random intercepts for assessing the probability of not graduating, based on entry-level fitness. The primary analyses were restricted to recruits with complete entry-level fitness data. The fitness measures most strongly associated with academy failure were lesser number of push-ups completed (odds ratio [OR] = 5.2, 95% confidence interval [CI] 2.3-11.7, for 20 versus 41-60 push-ups) and slower run times (OR = 3.8, 95% CI 1.8-7.8, [1.5 mile run time of ≥15'20″] versus [12'33″ to 10'37″]). Baseline pushups and 1.5-mile run-time showed the best ability to predict successful academy graduation, especially when considered together. Future research should include prospective validation of entry-level fitness as a predictor of subsequent police academy success. © The Author 2017. Published by Oxford University Press on behalf of the Society of Occupational Medicine.

  13. Some Suggestions for Graduate School Education

    Science.gov (United States)

    Seidman, Ann

    1977-01-01

    Some of the implications of the failure of graduate schools to help students find constructive solutions to societal problems are considered. This issue is seen as a crucial one since graduate students are not only teaching assistants, with a major share of the burden of undergraduate education, but become university professors and secondary…

  14. A Convenient Storage Rack for Graduated Cylinders

    Science.gov (United States)

    Love, Brian

    2004-01-01

    An attempt is made to find a solution to the occasional problem of a need for storing large numbers of graduated cylinders in many teaching and research laboratories. A design, which involves the creation of a series of parallel channels that are used to suspend inverted graduated cylinders by their bases, is proposed.

  15. International Student Perspectives on Graduate Advising Relationships

    Science.gov (United States)

    Rice, Kenneth G.; Choi, Chun-Chung; Zhang, Yanmei; Ye, Huan Jacqueline; Nesic, Aleksandra; Bigler, Monica; Anderson, Debra; Villegas, Jorge

    2009-01-01

    International graduate students experience a number of unique challenges as they transition through their training programs. Surprisingly, relatively little research has been conducted on perhaps one of the most crucial predictors of international students' retention and success within their graduate programs: the advising relationship. Using a…

  16. Graduates\\' Perception of University Programmes and Their ...

    African Journals Online (AJOL)

    Graduates\\' Perception of University Programmes and Their Relevance to Employment: A study of University of Nairobi Graduates (1991-1998). Gerald N Kimani. Abstract. No Abstract Available Africa Development Vol. XXX (1&2) 2005: 68-85. http://dx.doi.org/10.4314/ad.v30i1.22213 · AJOL African Journals Online.

  17. Job Satisfaction and Dissatisfaction Among Journalism Graduates

    Science.gov (United States)

    Shaver, Harold C.

    1978-01-01

    A survey of the degree of job satisfaction felt by 404 news/editorial and advertising graduates indicates that journalism graduates develop satisfaction and dissatisfaction with jobs in a manner usually consistent with Frederick Herzberg's motivation-hygiene theory of job satisfaction. (GW)

  18. Why AD Graduates Choose Their First Jobs.

    Science.gov (United States)

    Smokvina, Gloria J.; Bratt, Ellen M.

    Reasons for the job selections of 64 associate degree nursing graduates were examined in a pilot study at Purdue University. The basic research question was whether nursing graduates initially view "maintenance" or motivational factors as more important. Based on Herzberg's theory of motivation, information is provided on maintenance or hygiene…

  19. Engaging a New Generation of Graduates

    Science.gov (United States)

    Shaw, Sue; Fairhurst, David

    2008-01-01

    Purpose: The purpose of this paper is to explore the concept of generational difference and reflect on how this might impact on organisational approaches to graduate development. Design/methodology/approach: The paper explores the characteristics of Generation Y graduates and the implications of their entry into the workplace for organisations'…

  20. Graduate Student Project: Employer Operations Management Analysis

    Science.gov (United States)

    Fish, Lynn A.

    2008-01-01

    Part-time graduate students at an Association to Advance Collegiate Schools of Business-accredited college complete a unique project by applying operations management concepts to their current employer. More than 92% of 368 graduates indicated that this experiential project was a positive learning experience, and results show a positive impact on…

  1. Historiography in Graduate Technology Teacher Education

    Science.gov (United States)

    Flowers, Jim; Hunt, Brian

    2012-01-01

    A proposal is made suggesting the inclusion of historiography (i.e., historical research and the writing of history) into graduate technology teacher education. In particular, a strategy is forwarded to have graduate students in technology teacher education, who are working at schools in different locations, conduct historical research and write…

  2. Ranking Workplace Competencies: Student and Graduate Perceptions.

    Science.gov (United States)

    Rainsbury, Elizabeth; Hodges, Dave; Burchell, Noel; Lay, Mark

    2002-01-01

    New Zealand business students and graduates made similar rankings of the five most important workplace competencies: computer literacy, customer service orientation, teamwork and cooperation, self-confidence, and willingness to learn. Graduates placed greater importance on most of the 24 competencies, resulting in a statistically significant…

  3. Graduate Students' Perceptions of Contrapower Sexual Harassment

    Science.gov (United States)

    Mohipp, Charmaine; Senn, Charlene Y.

    2008-01-01

    This study compared the perceptions of 172 graduate students to traditional versus contrapower sexual harassment. Graduate students are a unique sample due to their dual role as a student and a teacher. After controlling for attitudes toward feminism and sexual harassment, participants viewed contrapower sexual harassment as less indicative of…

  4. A Graduate Class in Research Data Management

    Science.gov (United States)

    Schmidt, Lawrence; Holles, Joseph

    2018-01-01

    A graduate elective course in Research Data Management (RDM) was developed and taught as a team by a research librarian and a research active faculty member. Coteaching allowed each instructor to contribute knowledge in their specialty areas. The goal of this course was to provide graduate students the RDM knowledge necessary to efficiently and…

  5. OPAL jet chamber full scale prototype

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, H M; Hauschild, M; Hartmann, H; Hegerath, A; Boerner, H; Burckhart, H J; Dittmar, M; Hammarstroem, R; Heuer, R D; Mazzone, L

    1986-12-01

    The concept of a jet chamber for the central detector of OPAL has been tested with a full scale prototype. The design of this prototype, its mechanical and electrical structure and its support system for high voltage, gas, laser calibration and readout are described. Operating experience has been gathered since summer 1984. The chamber performance in terms of spatial resolution and particle identification capability is given.

  6. OPAL jet chamber full scale prototype

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, H M; Hauschild, M; Hartmann, H; Hegerath, A; Boerner, H; Burckhart, H J; Dittmar, M; Hammarstreom, R; Heuer, R D; Mazzone, L

    1986-05-22

    The concept of a jet chamber for the central detector of OPAL has been tested with a full scale prototype. The design of this prototype, its mechanical and electrical structure and its support system for high voltage, gas, laser calibration and readout are described. The operating experience gathered since the summer of 1984 and the chamber performance as measured by its spatial resolution and ability to identify particles are also given.

  7. Light Guide Collector Prototype: Laboratory Testing

    Directory of Open Access Journals (Sweden)

    Jitka - Mohelnikova

    2017-12-01

    Full Text Available The article reviews the potential of light guide system equipped by a concentrator device capturing daylight applicable for illumination of building interiors and presents results of experiments on performance of its prototype. The main goal is focused on the comparison of traditional solutions and newly developed prototype of the light guide system and presents examination of its light transmission efficiency based on the laboratory experiments.

  8. Light Guide Collector Prototype: Laboratory Testing

    OpenAIRE

    Jitka - Mohelnikova; Stanislav Darula; Ayodeji Omishore; Petr Mohelnik; Denis Micek

    2017-01-01

    The article reviews the potential of light guide system equipped by a concentrator device capturing daylight applicable for illumination of building interiors and presents results of experiments on performance of its prototype. The main goal is focused on the comparison of traditional solutions and newly developed prototype of the light guide system and presents examination of its light transmission efficiency based on the laboratory experiments.

  9. Software testing for evolutionary iterative rapid prototyping

    OpenAIRE

    Davis, Edward V., Jr.

    1990-01-01

    Approved for public release; distribution unlimited. Rapid prototyping is emerging as a promising software development paradigm. It provides a systematic and automatable means of developing a software system under circumstances where initial requirements are not well known or where requirements change frequently during development. To provide high software quality assurance requires sufficient software testing. The unique nature of evolutionary iterative prototyping is not well-suited for ...

  10. Automated prototyping tool-kit (APT)

    OpenAIRE

    Nada, Nader; Shing, M.; Berzins, V.; Luqi

    2002-01-01

    Automated prototyping tool-kit (APT) is an integrated set of software tools that generate source programs directly from real-time requirements. The APT system uses a fifth-generation prototyping language to model the communication structure, timing constraints, 1/0 control, and data buffering that comprise the requirements for an embedded software system. The language supports the specification of hard real-time systems with reusable components from domain specific component libraries. APT ha...

  11. Prototype_Matematikforløb_Sct-Hans

    DEFF Research Database (Denmark)

    Davidsen, Helle Munkholm; Sørensen, Kirsten Bonde; Klitø, Nanna Breinholt

    2015-01-01

    Forløbet udgør en prototype på et matematikforløb til 8. klasse, som er udviklet til at styrke og fastholde elevers motivation for læring. Formålet med denne prototype er at styrke motivationen for læring gennem synlige læringsmål, faglig differentiering og elevernes medbestemmelse. Didaktisk mål...

  12. Prototype_Danskforløb_Sct.Hans

    DEFF Research Database (Denmark)

    Davidsen, Helle Munkholm; Sørensen, Kirsten Bonde; Klitø, Nanna Breinholt

    2015-01-01

    Forløbet udgør en prototype på et danskforløb til 4. klasse, som er udviklet til at styrke og fastholde elevers motivation for læring. Formålet med denne prototype er at styrke motivationen for læring gennem synlige læringsmål, faglig differentiering og elevernes medbestemmelse. Didaktisk mål: at...

  13. Field evaluation of prototype electrofibrous filters

    International Nuclear Information System (INIS)

    Kuhl, W.D.; Bergman, W.; Biermann, A.H.; Lum, B.Y.

    1982-01-01

    New prototype electrofibrous filters were designed, built and evaluated in laboratory tests and in field installations. Two prototypes were designed for use in nuclear ventilation ducts as prefilters to HEPA filters. One prototype is designed to be a permanent component of the ventilation system while the other is a disposable unit. The disposable electrofibrous prefilter was installed in the exhaust stream of a glove box in which barrels of uranium turnings are burned. Preliminary tests show the disposal prefilter is effectively prolonging the HEPA filter life. An earlier prototype of the rolling prefilter was upgraded to meet the increased requirements for installation in a nuclear facility. This upgraded prototype was evaluated in the fire test facility at LLNL and shown to be effective in protecting HEPA filters from plugging under the most severe smoke conditions. The last prototype described in this report is a recirculating air filter. After demonstrating a high performance in laboratory tests the unit was shipped to Savannah River where it is awaiting installation in a Pu fuel fabrication facility. An analysis of the particulate problem in Savannah River indicates that four recirculating air filter will save $172,000 per year in maintenance costs

  14. MPACT Fast Neutron Multiplicity System Prototype Development

    Energy Technology Data Exchange (ETDEWEB)

    D.L. Chichester; S.A. Pozzi; J.L. Dolan; M.T. Kinlaw; S.J. Thompson; A.C. Kaplan; M. Flaska; A. Enqvist; J.T. Johnson; S.M. Watson

    2013-09-01

    This document serves as both an FY2103 End-of-Year and End-of-Project report on efforts that resulted in the design of a prototype fast neutron multiplicity counter leveraged upon the findings of previous project efforts. The prototype design includes 32 liquid scintillator detectors with cubic volumes 7.62 cm in dimension configured into 4 stacked rings of 8 detectors. Detector signal collection for the system is handled with a pair of Struck Innovative Systeme 16-channel digitizers controlled by in-house developed software with built-in multiplicity analysis algorithms. Initial testing and familiarization of the currently obtained prototype components is underway, however full prototype construction is required for further optimization. Monte Carlo models of the prototype system were performed to estimate die-away and efficiency values. Analysis of these models resulted in the development of a software package capable of determining the effects of nearest-neighbor rejection methods for elimination of detector cross talk. A parameter study was performed using previously developed analytical methods for the estimation of assay mass variance for use as a figure-of-merit for system performance. A software package was developed to automate these calculations and ensure accuracy. The results of the parameter study show that the prototype fast neutron multiplicity counter design is very nearly optimized under the restraints of the parameter space.

  15. Investigating the role of implicit prototypes in the prototype willingness model.

    Science.gov (United States)

    Howell, Jennifer L; Ratliff, Kate A

    2017-06-01

    One useful theory to predict health behavior is the prototype-willingness model (PWM), which posits that people are more willing to engage in behavior to the extent that they have a positive view of the prototypical person who performs that behavior. The goal of the present research is to test whether adding an implicit measure of prototype favorability might improve explanatory power in the PWM. Two studies examined whether implicit prototype favorability uniquely predicted White women's intentions to engage in healthy sun behavior over the next 3-6 months, and their willingness to engage in risky sun behavior, should the opportunity arise. The results suggested that implicit prototype favorability, particularly implicit prototypes of those who engage in risky UV-related behaviors, uniquely predicted intentions to engage in healthy sun behavior and willingness to engage in risky sun behavior in the PWM.

  16. Newly graduated nurses' use of knowledge sources

    DEFF Research Database (Denmark)

    Voldbjerg, Siri Lygum; Grønkjaer, Mette; Sørensen, Erik Elgaard

    2016-01-01

    AIM: To advance evidence on newly graduated nurses' use of knowledge sources. BACKGROUND: Clinical decisions need to be evidence-based and understanding the knowledge sources that newly graduated nurses use will inform both education and practice. Qualitative studies on newly graduated nurses' use...... underscoring progression in knowledge use and perception of competence and confidence among newly graduated nurses. CONCLUSION: The transition phase, feeling of confidence and ability to use critical thinking and reflection, has a great impact on knowledge sources incorporated in clinical decisions....... The synthesis accentuates that for use of newly graduated nurses' qualifications and skills in evidence-based practice, clinical practice needs to provide a supportive environment which nurtures critical thinking and questions and articulates use of multiple knowledge sources....

  17. Graduate education in Canada and China: What enrolment data tells us

    Directory of Open Access Journals (Sweden)

    Tony DiPetta

    2010-05-01

    Full Text Available China’s emergence as a global economic and political power is in part due to the country’s renewed involvement with, and commitment to, graduate higher education (Harris, 2005. Graduate education in China is viewed as the means of producing the essential scientists, engineers and skilled workforce needed to sustain the country’s rapid industrial growth and economic development. But how does China’s graduate education system compare with North American graduate higher education and what can each learn from the other? This paper examines the trends and patterns in Master’s level graduate education programs in China and Canada based on enrolment data gathered from 1999 to 2005. Initial comparisons of the data find that Master’s level enrolments in China are growing faster than in Canada; enrolment pattern distributions for both countries are unbalanced geographically and from a disciplinary perspective the highest number of Master’s level enrolments in Canada were in the business and management disciplines while in China the greatest Master’s level enrolments were in engineering. The comparisons provided by this study help identify some of the trends and challenges of graduate education at both the national and the regional levels of both countries.

  18. Undergraduate student nurses' expectations and their self-reported preparedness for the graduate year role.

    Science.gov (United States)

    Heslop, L; McIntyre, M; Ives, G

    2001-12-01

    The study identifies third-year nurses' expectations of the graduate nurse role and ascertains how prepared they feel to fulfil this role. The literature substantiates that the university-workplace transition is marked by differences between students' expectations of the graduate year and the realities of practice they encounter in the workforce setting. Nursing professionals and health service employers continue to debate the expectations required of the new nurse graduate. Yet there is little assessment of graduate nurses' expectations of the workplace. This study describes student nurses' expectations of the graduate year and the extent to which they regard themselves as well- or ill-prepared. Third-year student nurses (n=105) from a 3-year Bachelor of Nursing (BN) course at a large Metropolitan University in Australia were surveyed. A group of nursing academics and their senior colleagues in the clinical setting designed a questionnaire in light of common themes derived from literature on the graduate year role. Responses were examined and analysed using descriptive statistics. Responses revealed that student nurses tended to favour large public hospitals, and sought a good graduate programme with associated opportunities for guidance and support. Most expected to achieve good working relationships with both professional colleagues and patients. Final year students expressed some apprehension about meeting the performance expectations of the workplace, given their self-perceived lack of clinical experience. When asked about their initial expectations of the workplace, third year student nurses expressed little apprehension and reported high levels on scales of organizational commitment and professionalism. The research literature suggests that divisions exist between students' expectations of the graduate year and the actual work experience. The expectations of the graduate year described in this study offer a student-centred perspective that contributes to

  19. The relationship of high school graduation exams to graduation rates and SAT scores.

    Directory of Open Access Journals (Sweden)

    Gregory J. Marchant

    2005-01-01

    Full Text Available The current study examined the effect of high school graduation exams on states' graduation rates, states' aggregated SAT scores, and individual students' SAT scores. Three data sources were used: One source identified states requiring a standardized test for graduation; the NCES provided state aggregated data on graduation rates for the class of 2002; and the College Board provided its 2001 SAT database for all test-takers. After controlling for students' demographic characteristics (e.g., race, family education and income, GPA and class rank, regression analyses revealed that states requiring graduation exams had lower graduation rates and lower SAT scores. Individually, students from states requiring a graduation exam performed more poorly on the SAT than did students from states not requiring an exam. The impact of high stakes tests' on students' motivation to stay in school and on the teaching of critical thinking skills (tested by the SAT are discussed.

  20. An Evaluation of ChalleNGe Graduates DOD Employability

    Science.gov (United States)

    2018-01-22

    initial reading and applied math TABE scores are more likely to complete ChalleNGe. In addition, those graduates who begin ChalleNGe with higher TABE...each site is given discretion in how it structures its program. As a result, the academic goals of the ChalleNGe sites vary. Some seek to have...students arrive at ChalleNGe at low levels of reading comprehension, writing, and basic math ; they simply are not ready to acquire a second language

  1. Tackling mixed messages : embedding advanced numeracy in graduate identities.

    OpenAIRE

    Peelo, Moira Teresa; Francis, Brian

    2009-01-01

    This paper proposes some elements of a university-level agenda needed to develop a cross-campus approach to numeracy. In the last ten years, there has been much work supporting the development of pedagogy surrounding maths and quantitative skills alongside discussion and innovation in teaching elementary statistics, as well as growth of excellent websites. But there are additional barriers to numeracy in graduates which may not be a part of individual lecturers’ remits and so are left unchall...

  2. A translational platform for prototyping closed-loop neuromodulation systems

    Science.gov (United States)

    Afshar, Pedram; Khambhati, Ankit; Stanslaski, Scott; Carlson, David; Jensen, Randy; Linde, Dave; Dani, Siddharth; Lazarewicz, Maciej; Cong, Peng; Giftakis, Jon; Stypulkowski, Paul; Denison, Tim

    2013-01-01

    While modulating neural activity through stimulation is an effective treatment for neurological diseases such as Parkinson's disease and essential tremor, an opportunity for improving neuromodulation therapy remains in automatically adjusting therapy to continuously optimize patient outcomes. Practical issues associated with achieving this include the paucity of human data related to disease states, poorly validated estimators of patient state, and unknown dynamic mappings of optimal stimulation parameters based on estimated states. To overcome these challenges, we present an investigational platform including: an implanted sensing and stimulation device to collect data and run automated closed-loop algorithms; an external tool to prototype classifier and control-policy algorithms; and real-time telemetry to update the implanted device firmware and monitor its state. The prototyping system was demonstrated in a chronic large animal model studying hippocampal dynamics. We used the platform to find biomarkers of the observed states and transfer functions of different stimulation amplitudes. Data showed that moderate levels of stimulation suppress hippocampal beta activity, while high levels of stimulation produce seizure-like after-discharge activity. The biomarker and transfer function observations were mapped into classifier and control-policy algorithms, which were downloaded to the implanted device to continuously titrate stimulation amplitude for the desired network effect. The platform is designed to be a flexible prototyping tool and could be used to develop improved mechanistic models and automated closed-loop systems for a variety of neurological disorders. PMID:23346048

  3. Uranus: a rapid prototyping tool for FPGA embedded computer vision

    Science.gov (United States)

    Rosales-Hernández, Victor; Castillo-Jimenez, Liz; Viveros-Velez, Gilberto; Zuñiga-Grajeda, Virgilio; Treviño Torres, Abel; Arias-Estrada, M.

    2007-01-01

    The starting point for all successful system development is the simulation. Performing high level simulation of a system can help to identify, insolate and fix design problems. This work presents Uranus, a software tool for simulation and evaluation of image processing algorithms with support to migrate them to an FPGA environment for algorithm acceleration and embedded processes purposes. The tool includes an integrated library of previous coded operators in software and provides the necessary support to read and display image sequences as well as video files. The user can use the previous compiled soft-operators in a high level process chain, and code his own operators. Additional to the prototyping tool, Uranus offers FPGA-based hardware architecture with the same organization as the software prototyping part. The hardware architecture contains a library of FPGA IP cores for image processing that are connected with a PowerPC based system. The Uranus environment is intended for rapid prototyping of machine vision and the migration to FPGA accelerator platform, and it is distributed for academic purposes.

  4. Undergraduate and graduate petroleum engineering education in the U.S

    International Nuclear Information System (INIS)

    Von Gonten, W.D.; Whiting, R.L.

    1992-01-01

    Petroleum Engineering educational programs produce graduates primarily for the upstream sector of the petroleum industry. This paper presents a summary of both the undergraduate and graduate petroleum engineering programs in the United States. The undergraduate portion of the paper will address the curriculum, accreditation, enrollments, student recruitment, faculty, jobs, starting salaries, and a historical perspective. The graduate section will address both master and doctoral level programs including the number and size of programs, curriculum, admission requirements, program administration, jobs, salaries, and a historical perspective

  5. Teaching Critical Thinking in Graduate Medical Education: Lessons Learned in Diagnostic Radiology.

    Science.gov (United States)

    Morrissey, Benjamin; Heilbrun, Marta E

    2017-01-01

    The 2014 Institute of Medicine report, Graduate Medical Education that Meets the Nation's Health Needs , challenged the current graduate medical training process and encouraged new opportunities to redefine the fundamental skills and abilities of the physician workforce. This workforce should be skilled in critically evaluating the current systems to improve care delivery and health. To meet these goals, current challenges, motivations, and educational models at the medical school and graduate medical education levels related to formal training in nonclinical aspects of medicine, especially critical thinking, are reviewed. Our diagnostic radiology training program is presented as a "case study" to frame the review.

  6. Prototype nickel component demonstration. Final report

    International Nuclear Information System (INIS)

    Boss, D.E.

    1994-01-01

    We have been developing a process to produce high-purity nickel structures from nickel carbonyl using chemical vapor deposition (CVD). The prototype demonstration effort had been separated into a number of independent tasks to allow Los Alamos National Laboratory (LANL) the greatest flexibility in tailoring the project to their needs. LANL selected three of the proposed tasks to be performed--Task 1- system modification and demonstration, Task 2-stainless steel mandrel trials, and Task 4-manufacturing study. Task 1 focused on converting the CVD system from a hot-wall to a cold-wall configuration and demonstrating the improved efficiency of the reactor type by depositing a 0.01-inch-thick nickel coating on a cylindrical substrate. Since stainless steel substrates were preferred because of their low α-emitter levels, Task 2 evaluated mandrel configurations which would allow removal of the nickel tube from the substrate. The manufacturing study was performed to develop strategies and system designs for manufacturing large quantities of the components needed for the Sudbury Nuetrino Observatory (SNO) program. Each of these tasks was successfully completed. During these efforts, BIRL successfully produced short lengths of 2-inch-diameter tubing and 6-inch-wide foil with levels of α-radiation emitting contaminants lower than either conventional nickel alloys or electroplated materials. We have produced both the tubing and foil using hot-substrate, cold-wall reactors and clearly demonstrated the advantages of higher precursor efficiency and deposition rate associated with this configuration. We also demonstrated a novel mandrel design which allowed easy removal of the nickel tubing and should dramatically simplify the production of 1.5-meter-long tubes in the production phase of the program

  7. A prototype pixel readout chip for asynchronous detection applications

    International Nuclear Information System (INIS)

    Raymond, D.M.; Hall, G.; Lewis, A.J.; Sharp, P.H.

    1991-01-01

    A two-dimensional array of amplifier cells has been fabricated as a prototype readout system for a matching array of silicon diode detectors. Each cell contains a preamplifier, shaping amplifier, comparator and analogue signal storage in an area of 300 μmx320 μm using 3 μm CMOS technology. Full size chips will be bump bonded to pixel detector arrays. Low noise and asynchronous operation are novel design features. With noise levels of less than 250 rms electrons for input capacitances up to 600 fF, pixel detectors will be suitable for autoradiography, synchrotron X-ray and high energy particle detection applications. The design of the prototype chip is presented and future developments and prospects for applications are discussed. (orig.)

  8. Development of Prototype HTS Components for Magnetic Suspension Applications

    Science.gov (United States)

    Haldar, P.; Hoehn, J., Jr.; Selvamanickam, V.; Farrell, R. A.; Balachandran, U.; Iyer, A. N.; Peterson, E.; Salazar, K.

    1996-01-01

    We have concentrated on developing prototype lengths of bismuth and thallium based silver sheathed superconductors by the powder-in-tube approach to fabricate high temperature superconducting (HTS) components for magnetic suspension applications. Long lengths of mono and multi filament tapes are presently being fabricated with critical current densities useful for maglev and many other applications. We have recently demonstrated the prototype manufacture of lengths exceeding 1 km of Bi-2223 multi filament conductor. Long lengths of thallium based multi-filament conductor have also been fabricated with practical levels of critical current density and improved field dependence behavior. Test coils and magnets have been built from these lengths and characterized over a range of temperatures and background fields to determine their performance. Work is in progress to develop, fabricate and test HTS windings that will be suitable for magnetic suspension, levitation and other electric power related applications.

  9. Test beam results of LHCb scintillating fibre tracker prototypes

    Energy Technology Data Exchange (ETDEWEB)

    Bachmann, Sebastian; Comerma, Albert; Gerick, David; Hansmann-Menzemer, Stephanie; Kecke, Matthieu; Leverington, Blake; Mazorra de Cos, Jose; Mitzel, Dominik; Neuner, Max; Uwer, Ulrich; Han, Xiaoxue [Physikalisches Institut, Universitaet Heidelberg (Germany); Collaboration: LHCb-Collaboration

    2016-07-01

    During the Long Shutdown 2 of the LHC, the LHCb detector will undergo a major upgrade to meet the challenges of running at a higher luminosity. The current Inner and Outer Tracking system will not be sufficient to deal with the envisaged increased detector occupancy and higher radiation levels and will be replaced by a single tracking detector based on 0.250 mm diameter plastic scintillating fibres. The fibres are wound to multilayer ribbons 2.4 m long and read out by 128 channel silicon photomultiplier arrays. The Scintillating Fibre (SciFi) tracker will cover a total active area of 360 m{sup 2}, arranged in 12 layers. The performances of prototype modules having 6 and 8 layers of fibre have been tested at the SPS at CERN. This talk focuses on basic properties of the prototype modules such as spatial resolution, single hit efficiency and light yield measured during the test beam campaigns in 2015.

  10. A data grid prototype for distributed data production in CMS

    CERN Document Server

    Hafeez, M; Stockinger, H E

    2001-01-01

    The CMS experiment at CERN is setting up a grid infrastructure required to fulfil the needs imposed by Terabyte scale productions for the next few years. The goal is to automate the production and at the same time allow the users to interact with the system, if required, to make decisions which would optimise performance. We present the architecture, design and functionality of our first working objectivity file replication prototype. The middle-ware of choice is the Globus toolkit that provides promising functionality. Our results prove the ability of the Globus toolkit to be used as an underlying technology for a world-wide Data Grid. The required data management functionality includes high speed file transfers, secure access to remote files, selection and synchronisation of replicas and managing the meta information. The whole system is expected to be flexible enough to incorporate site specific policies. The data management granularity is the file rather than the object level. The first prototype is curre...

  11. A pythonic integrated solution for virtual prototyping of cyclotrons

    International Nuclear Information System (INIS)

    Qin Bin; Yang Jun; Xiong Yongqian; Chen Dezhi; Yu Tiaoqin; Dong Tianlin; Zhang Tianjue; Fan Mingwu

    2007-01-01

    Virtual prototyping (VP) is a novel technique in engineering, which is desired to be applied to cyclotron design and development. Some sub-prototyping components, including beam dynamics, magnet, RF system and control system of cyclotrons, have been developed separately, but an integrated platform which encapsulates these different components is required for global system optimization. Considering that the VP integrated platform is a large-scale software and has numerous loose-coupled components, this paper describes the pythonic approach to implement this platform. By mixing the high-level interpreted Python language and the compiled languages like Fortran/C/C++ in an effective method, this approach can achieve a combination of code efficiency, flexibility and compactness

  12. Master of Professional Studies in Agriculture and Life Sciences Offered through the Field of Food Science and Technology at Cornell University: A Model for the Development of a Course-Based Graduate Degree in Food Science and Technology

    Science.gov (United States)

    Weller, Daniel; Robbins, Janette; Elmore, Andrea; Wiedmann, Martin

    2015-01-01

    The shortage of highly qualified graduates with advanced training in food science is a pressing problem facing government agencies and the food industry. This has created a need to recruit and train food scientists at the graduate level. However, most graduate level programs are research-based and do not meet the needs of many students. The…

  13. Novice designers’ use of prototypes in engineering design

    Science.gov (United States)

    Deininger, Michael; Daly, Shanna R.; Sienko, Kathleen H.; Lee, Jennifer C.

    2017-01-01

    Prototypes are essential tools in product design processes, but are often underutilized by novice designers. To help novice designers use prototypes more effectively, we must first determine how they currently use prototypes. In this paper, we describe how novice designers conceptualized prototypes and reported using them throughout a design project, and compare reported prototyping use to prototyping best practices. We found that some of the reported prototyping practices by novice designers, such as using inexpensive prototypes early and using prototypes to define user requirements, occurred infrequently and lacked intentionality. Participants’ initial descriptions of prototypes were less sophisticated than how they later described using them and only upon prompted reflection did participants recognize more specific benefits of using prototypes. PMID:29398740

  14. Promoting convergence: The integrated graduate program in physical and engineering biology at Yale University, a new model for graduate education.

    Science.gov (United States)

    Noble, Dorottya B; Mochrie, Simon G J; O'Hern, Corey S; Pollard, Thomas D; Regan, Lynne

    2016-11-12

    In 2008, we established the Integrated Graduate Program in Physical and Engineering Biology (IGPPEB) at Yale University. Our goal was to create a comprehensive graduate program to train a new generation of scientists who possess a sophisticated understanding of biology and who are capable of applying physical and quantitative methodologies to solve biological problems. Here we describe the framework of the training program, report on its effectiveness, and also share the insights we gained during its development and implementation. The program features co-teaching by faculty with complementary specializations, student peer learning, and novel hands-on courses that facilitate the seamless blending of interdisciplinary research and teaching. It also incorporates enrichment activities to improve communication skills, engage students in science outreach, and foster a cohesive program cohort, all of which promote the development of transferable skills applicable in a variety of careers. The curriculum of the graduate program is integrated with the curricular requirements of several Ph.D.-granting home programs in the physical, engineering, and biological sciences. Moreover, the wide-ranging recruiting activities of the IGPPEB serve to enhance the quality and diversity of students entering graduate school at Yale. We also discuss some of the challenges we encountered in establishing and optimizing the program, and describe the institution-level changes that were catalyzed by the introduction of the new graduate program. The goal of this article is to serve as both an inspiration and as a practical "how to" manual for those who seek to establish similar programs at their own institutions. © 2016 by The International Union of Biochemistry and Molecular Biology, 44(6):537-549, 2016. © 2016 The Authors Biochemistry and Molecular Biology Education published by Wiley Periodicals, Inc. on behalf of International Union of Biochemistry and Molecular Biology.

  15. Practical science communication strategies for graduate students.

    Science.gov (United States)

    Kuehne, Lauren M; Twardochleb, Laura A; Fritschie, Keith J; Mims, Meryl C; Lawrence, David J; Gibson, Polly P; Stewart-Koster, Ben; Olden, Julian D

    2014-10-01

    Development of skills in science communication is a well-acknowledged gap in graduate training, but the constraints that accompany research (limited time, resources, and knowledge of opportunities) make it challenging to acquire these proficiencies. Furthermore, advisors and institutions may find it difficult to support graduate students adequately in these efforts. The result is fewer career and societal benefits because students have not learned to communicate research effectively beyond their scientific peers. To help overcome these hurdles, we developed a practical approach to incorporating broad science communication into any graduate-school time line. The approach consists of a portfolio approach that organizes outreach activities along a time line of planned graduate studies. To help design the portfolio, we mapped available science communication tools according to 5 core skills essential to most scientific careers: writing, public speaking, leadership, project management, and teaching. This helps graduate students consider the diversity of communication tools based on their desired skills, time constraints, barriers to entry, target audiences, and personal and societal communication goals. By designing a portfolio with an advisor's input, guidance, and approval, graduate students can gauge how much outreach is appropriate given their other commitments to teaching, research, and classes. The student benefits from the advisors' experience and mentorship, promotes the group's research, and establishes a track record of engagement. When graduate student participation in science communication is discussed, it is often recommended that institutions offer or require more training in communication, project management, and leadership. We suggest that graduate students can also adopt a do-it-yourself approach that includes determining students' own outreach objectives and time constraints and communicating these with their advisor. By doing so we hope students will

  16. Prototype acoustic resonance spectroscopy monitor

    International Nuclear Information System (INIS)

    Sinha, D.N.; Olinger, C.T.

    1996-03-01

    This report reports on work performed for the International Atomic Energy Agency (IAEA) through the Program Office for Technical Assistance (POTAS). In this work, we investigate possible applications of nondestructive acoustics measurements to facilitate IAEA safeguards at bulk processing facilities. Two different acoustic techniques for verifying the internal structure of a processing tank were investigated. During this effort we also examined two acoustic techniques for assessing the fill level within a processing tank. The fill-level measurements could be made highly portable and have an added safeguards advantage that they can also detect stratification of fill material. This later application may be particularly useful in confirming the absence of stratification in plutonium processing tanks before accountability samples are withdrawn

  17. Prototyping for surgical and prosthetic treatment.

    Science.gov (United States)

    Goiato, Marcelo Coelho; Santos, Murillo Rezende; Pesqueira, Aldiéris Alves; Moreno, Amália; dos Santos, Daniela Micheline; Haddad, Marcela Filié

    2011-05-01

    Techniques of rapid prototyping were introduced in the 1980s in the field of engineering for the fabrication of a solid model based on a computed file. After its introduction in the biomedical field, several applications were raised for the fabrication of models to ease surgical planning and simulation in implantology, neurosurgery, and orthopedics, as well as for the fabrication of maxillofacial prostheses. Hence, the literature has described the evolution of rapid prototyping technique in health care, which allowed easier technique, improved surgical results, and fabrication of maxillofacial prostheses. Accordingly, a literature review on MEDLINE (PubMed) database was conducted using the keywords rapid prototyping, surgical planning, and maxillofacial prostheses and based on articles published from 1981 to 2010. After reading the titles and abstracts of the articles, 50 studies were selected owing to their correlations with the aim of the current study. Several studies show that the prototypes have been used in different dental-medical areas such as maxillofacial and craniofacial surgery; implantology; neurosurgery; orthopedics; scaffolds of ceramic, polymeric, and metallic materials; and fabrication of personalized maxillofacial prostheses. Therefore, prototyping has been an indispensable tool in several studies and helpful for surgical planning and fabrication of prostheses and implants.

  18. Prototype superconducting magnet for the FFAG accelerator

    International Nuclear Information System (INIS)

    Obana, T.; Ogitsu, T.; Yamamoto, A.; Yoshimoto, M.; Mori, Y.; Fujii, T.; Iwasa, M.; Orikasa, T.

    2006-01-01

    A study of a superconducting magnet for the Fixed Field Alternating Gradient (FFAG) accelerator has been performed. The FFAG accelerator requires static magnetic field, and it is suitable for superconducting magnet applications, because problems associated with time varying magnetic field such as eddy current loss can be eliminated. The superconducting magnet, which can generate high magnetic field, is possible to realize a higher beam energy with a given accelerator size or the size to be smaller for a given beam energy. The FFAG accelerator magnet is demanded to have a complicated nonlinear magnetic field with high accuracy. As a first prototype superconducting coil, the coil configuration which consists of left-right asymmetric cross-section and large aperture has been designed. The prototype coil has been successfully developed by using a 6-axis Computer Numerical Control (CNC) winding machine. The magnetic field of the prototype coil has been demonstrated in warm measurement. As a consequence, the technical feasibility has been verified with the prototype coil development and the performance test. In addition, the technology components developed in the prototype coil have a possibility to transfer to a fusion magnet

  19. Close encounters of the prototype kind

    CERN Multimedia

    2005-01-01

    CERN is building a new control centre for the operation of its entire accelerator complex and technical infrastructure. The prototype console for the new centre has just been installed and tested. Close encounters of the prototype kind CERN is building a new control centre for the operation of its entire accelerator complex and technical infrastructure. The prototype console for the new centre has just been installed and tested. The prototype of the control consoles that will be at the heart of the future CERN Control Centre (CCC) has just been installed in the Roy Billinge Room in Building 354. Until now, there have been four separate control rooms for the CERN accelerators and technical infrastructure. The CCC, which will be located on the Prévessin site, will bring them all together in a single room. The Centre will consist of 40 consoles for four different areas (LHC, SPS, PS complex and technical infrastructure). The prototype was tested by the technicians for a month. Following installation and con...

  20. Teaching ethical aptitude to graduate student researchers.

    Science.gov (United States)

    Weyrich, Laura S; Harvill, Eric T

    2013-01-01

    Limited time dedicated to each training areas, irrelevant case-studies, and ethics "checklists" have resulted in bare-bones Responsible Conduct of Research (RCR) training for present biomedical graduate student researchers. Here, we argue that science graduate students be taught classical ethical theory, such as virtue ethics, consequentialist theory, and deontological theory, to provide a basic framework to guide researchers through ethically complex situations and examine the applicability, implications, and societal ramifications of their research. Using a relevant biomedical research example to illustrate this point, we argue that proper ethics training for graduate student researchers not only will enhance current RCR training, but train more creative, responsible scientists.