WorldWideScience

Sample records for protetores solares utilizando

  1. PROSPECÇÃO TECNOLÓGICA: PROTETORES SOLARES ANTI UVA E ANTI UVB

    Directory of Open Access Journals (Sweden)

    Douglas Dourado Oliveira

    2014-03-01

    Full Text Available Com o aumento da temperatura no planeta devido o efeito estufa, há uma preocupação com as radiações ultravioletas que incidem na pele dos seres humanos. Diante disso a indústria cosmética vem desenvolvendo constantemente formulações contendo filtros solares, anti UVA, anti UVB e também os dois filtros associados numa mesma formulação, retardando o envelhecimento cutâneo, formação dos radicais livres e prevenindo uma grande problemática atual, o câncer de pele. O objetivo deste trabalho foi realizar uma prospecção para conhecimento do desenvolvimento científico e tecnológico relacionado à aplicação de filtros solares associados em uma mesma formulação baseando-se no número de patentes depositadas e de artigos publicados. A prospecção foi realizada no Banco Europeu de Patentes (EPO, no Banco Americano de Marcas e Patentes (USPTO e no Banco de dados do Instituto Nacional de Propriedade Industrial do Brasil (INPI, bem como nas bases de periódicos, CAPES, Pubmed, Science Direct e ACS Publications. O maior número de patentes foi depositado nos últimos 5 anos. As patentes em sua maioria estão classificadas em A61K. Os responsáveis por maior número de patentes foram os Estados Unidos, China e Japão. Há uma diminuição no número de depósitos de patentes quando se associou a UVA e UVB no fotoprotetor. Em relação à produção científica o número de publicações referente a formulações fotoprotetoras contendo os dois filtros associados é maior que o de depósito de patentes, porém segue o mesmo perfil de redução ao associar os filtros numa mesma formulação.

  2. Análisis de paneles solares térmicos utilizando software gratuito

    OpenAIRE

    Castellanos Cordeiro-Crespo, Antonio

    2009-01-01

    El objetivo de este proyecto es la evaluación de dos programas que trabajan en la simulación de paneles termosolares: KOLEKTOR Y CODEPRO. Para la valoración de dichos software tomaremos datos en el panel solar con el que cuenta la Universidad Politécnica de Cracovia. Después simularemos, utilizando las aplicaciones a estudio, introduciendo las mismas condiciones de la toma de datos, y compararemos los resultados obtenidos en ambos procedimientos. Lo más positivo es que ambos software son bast...

  3. PROTETOR SOLAR DIMINUI A INCIDÊNCIA DAS PODRIDÕES ‘OLHO-D-BOI’ E ‘BRANCA’ EM MAÇÃS ‘FUJI STANDARD’ E ‘PINK LADY’

    Directory of Open Access Journals (Sweden)

    ROSA MARIA VALDEBENITO-SANHUEZA

    2016-02-01

    Full Text Available RESUMO A podridão-olho-de-boi (Cryptosporiosis perennans e a podridão-branca (Botryosphaeria dothidea estão entre as principais doenças de verão da macieira no Brasil. O objetivo deste trabalho foi avaliar o efeito de uma película protetora constituída de cera de carnaúba e argilas (Raynox® , nas doses de 2,5 e 5,0%, na infecção por C. perennans e por B. dothidea em maçãs das cultivares Fuji Standard e Pink Lady. As macieiras foram pulverizadas cinco vezes de dezembro de 2007 a março de 2008, conforme previsão de condições adequadas para ocorrência dos danos e crescimento dos frutos. Na colheita, as maçãs foram inoculadas com os dois patógenos e avaliadas quanto à incidência das podridões. Indiferente à dose, o uso de Raynox® reduziu a incidência da podridão-branca e da podridão-olho-de-boi em 67% e 42% na ‘Fuji Standard’, e 43% e 42% na ‘Pink Lady’, respectivamente. O incremento da dose aumentou a eficiência do produto para o controle da podridão-olho-de-boi. Na dose de 2,5%, o controle da podridão-olho-de-boi foi de 19% e 20%, respectivamente, em maçãs ‘Fuji Standard’ e ‘Pink Lady’, enquanto para as mesmas cultivares, mas com a dose de 5,0%, estes valores foram de 65% e 63%. Mais estudos são necessários para o ajuste de dose e critérios de aplicação para que o protetor solar possa ser recomendado.

  4. Rural electrification with photovoltaic solar technology using solar home system; Eletrificacao rural com tecnologia solar fotovoltaica utilizando sistemas isolados autonomos

    Energy Technology Data Exchange (ETDEWEB)

    Salviano, Carlos Jose Caldas

    1999-02-01

    The utilization of solar energy, inexhaustible on the earthly scale of time, as heat and light source, today is one of the energetics alternatives more to confront the challenges of the new millennium. Remarkable is the impulse that power generation photovoltaic has received in Brazil. In Pernambuco, state of Brazil, the CELPE - Electric Power Company of Pernambuco, already implanted more than 750 photovoltaic solar home system (95 kW installed) for power supply to rural communities far from the grid connection that come across in commercial operation since 1994. Eight configurations were studied with modifications in their components (panel, battery and charge) with the objective to evaluate the performance and the adequacy of the size these configurations. The parameters utilized for this evaluation were: solar energy diary incident on the panel plat, diary efficiency generator, output voltage on the generator and state of charge the batteries bank. A system of data acquisition automated was fined to measure in real conditions the function of each components, the following parameters: solar radiation incident and temperature on the photovoltaic generator, voltage and generator current, batteries bank and charge and ambient temperature. About the configurations studied, it follows that analysis the operational of characteristics capacity and battery capacity of the SHS utilized, simulating the rural electrification conditions. It was possible to certify the adequate configurations for the load profile will be supply. (author)

  5. Desenvolvimento de um sistema de aquecimento solar compacto utilizando termossifões bifásicos

    OpenAIRE

    Abreu, Samuel Luna de

    2003-01-01

    Tese (doutorado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Programa de Pós-Graduação em Engenharia Mecânica. O presente trabalho apresenta o desenvolvimento de um sistema de aquecimento solar compacto, que utiliza tubos de calor para transportar o calor absorvido na placa coletora para o reservatório térmico. A configuração proposta difere das concepções existentes de sistemas com tubos de calor porque o condensador é brasado à parede do reservatório térmico em vez de s...

  6. Contribuição ao desenvolvimento de tecnologia de fabricação de celulas solares utilizando "dopant papers"

    OpenAIRE

    Alexandre Guass Junior

    1995-01-01

    Resumo: Este trabalho teve como objetivo o desenvolvimento de um conjunto de processos de baixo custo para fabricação de células solares. As células solares foram fabricadas utilizando lâminas de silício monocristalino, com orientação cristalografica e resistividade típica de 4.1 à 9.0 ohm.cm, tipo p dopadas com boro. Ajunção n-p foi obtida por difusão usando papéis dopantes. Estes papéis são de dois tipos, os que possuem boro e os com fósforo.A montagem de um conjunto de lâminas de s...

  7. Protetores bucais na prática desportiva de pacientes ortodônticos

    OpenAIRE

    França, Diogo Manuel Vasconcelos

    2017-01-01

    Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz O uso do protetor bucal deve ser estimulado entre desportistas. A prática desportiva leva a um aumento do risco de sofrer traumatismos dentários. Este risco pode ser reduzido com a utilização de um protetor bucal. A necessidade do uso de protetores bucais para atletas em tratamento ortodôntico é uma questão pouco abordada. Todos os pacientes ortodônticos, com aparelho fixo, e que participam em...

  8. Actividad solar del ciclo 23. Predicción del máximo y fase decreciente utilizando redes neuronales

    Science.gov (United States)

    Parodi, M. A.; Ceccatto, H. A.; Piacentini, R. D.; García, P. J.

    Different methods have been proposed in order to predict the maximum amplitude of solar cycles, either as a consequence of the intrinsic importance of this event and because of its relation with solar storms and possible effects upon satellites, communication systems, etc. In this work, a neural network solar activity prediction is presented, measured through the sunspot number (SSN). The 16-units neural network, with a 12:3:1 architecture, was trained in a ``feed-forward" propagation way and learning by the so called ``back propagation rule". The annual mean SSN data in the 1700-1975 and 1987-1998 periods were used as the training set. The solar cycle 21 (1976-1986) was taken as the cross-validation data set. After performing the network training we obtained a prediction of the maximum annual mean for the current solar cycle 23, SSNmax= 135 ±17 at the year 2000, which is 13% smaller than the International Consensus Commitee's mean maximum prediction obtained through ``precursor techniques". On the other hand, our prediction is only about 4% smaller than the Consensus's neural network mean prediction. A ``multiple step" prediction technique was also performed and SSN annual mean predicted values for the near-maximum (from the present year 1999 to beyond the maximum) and the declining activity of solar cycle 23 are presented in this work. The sensibility of predictions is also tested. To do so, we changed the interval width and comparated our results with those of a previous neural network prediction and those of others authors using differents methods.

  9. O uso do protetor bucal nas artes marciais: consciência e atitude

    Directory of Open Access Journals (Sweden)

    Camilla Cristina Lira Di Leone

    2014-12-01

    Full Text Available Introdução: O uso de protetores bucais durante a prática de esportes de contato é de fundamental importância como medida preventiva dos traumatismos orofaciais. Objetivo: Realizar um levantamento quanto a utilização do protetor bucal entre praticantes de artes marciais, assim como verificar qual é a percepção que tais esportistas têm sobre sua importância e função. Métodos: Realizou-se uma pesquisa descritiva e transversal, de caráter investigativo, composta por 231 praticantes de três diferentes modalidades de artes marciais: Jiu-jítsu, Tae kwon do e Muay Thai, nas cidades de Nova Friburgo-RJ e Macaé-RJ, Brasil, por meio de um questionário estruturado. Os dados foram tabulados no programa estatístico SPSS 16.0. Foi realizada a frequência, sendo aplicado, ainda, o teste qui-quadrado (p<0,05, para estabelecer relação entre variáveis de interesse. Resultados: Os dados indicaram que 60,6% dos entrevistados nunca receberam informações sobre o traumatismo orofacial durante a prática esportiva e que 46,3% dos esportistas já sofreram algum tipo de traumatismo orofacial. A maioria dos atletas (93,9% considera importante o uso do protetor bucal, porém este dado é desproporcional ao percentual de usuários do dispositivo: 78,7% no Muay Thai, 60,9% no Jiu-jítsu e 47,5% no Tae kwon do (p< 0,01. Dos protetores bucais existentes no mercado, o mais utilizado é o termoplástico ou tipo II (52,5% em todas as modalidades de lutas avaliadas. O protetor bucal personalizado causou menor percentual de interferência no rendimento durante a prática esportiva quando comparado com os outros tipos de protetores (p<0,07. Conclusão: A maioria dos esportistas reconhece a importância do uso do protetor bucal, apesar de relatar não ter recebido informações sobre traumatismo orofacial durante a prática esportiva; a maioria dos atletas utiliza o protetor bucal termoplástico; há necessidade de se difundir informações sobre as vantagens

  10. O uso do protetor bucal nas artes marciais: consciência e atitude

    OpenAIRE

    Di Leone, Camilla Cristina Lira; Barros, Igor Raphael Carvalho Nunes; Salles, Alessandro Guimarães; Antunes, Lívia Azeredo Alves; Antunes, Leonardo dos Santos

    2014-01-01

    Introdução: O uso de protetores bucais durante a prática de esportes de contato é de fundamental importância como medida preventiva dos traumatismos orofaciais.Objetivo: Realizar um levantamento quanto a utilização do protetor bucal entre praticantes de artes marciais, assim como verificar qual é a percepção que tais esportistas têm sobre sua importância e função.Métodos: Realizou-se uma pesquisa descritiva e transversal, de caráter investigativo, composta por 231 praticantes de três diferent...

  11. A water heating system analysis for rural residences, using solar energy; Analise de um sistema de aquecimento de agua para residencias rurais, utilizando energia solar

    Energy Technology Data Exchange (ETDEWEB)

    Basso, Luiz H.; Souza, Samuel N.M. de; Siqueira, Jair A.C.; Nogueira, Carlos E.C.; Santos, Reginaldo F. [Universidade Estadual do Oeste do Parana (UNIOESTE), Cascavel, PR (Brazil). Programa de Pos-Graduacao em Engenharia Agricola], emails: melegsouza@yahoo.com, ssouza@unioeste.br, jairsiqueira@unioeste.br, cecn1@yahoo.com.br, rfsantos@unioeste.br

    2010-01-15

    The awareness of the importance of the environment has stimulated the study of new renewed energy sources and less pollutant. Amongst these sources, solar energy stands alone for being perennial and clean. The use of solar energy in systems of agricultural residential water heating, can complement the economy of electric energy, base of the Brazilian energy matrix. Knowing the factors that influence the operation of a system of water heating by solar energy is important in determining their technical viabilities targeting their distribution in agricultural residences. To evaluate equipment of water heating for solar energy, a prototype was constructed in the campus of Assis Gurgacz College, in Cascavel,State of Parana, Brazil, with similar characteristics to equipment used in residences for two inhabitants, to function with natural circulation or thermo siphon and without help of a complementary heating system. The equipment revealed technical viability, reaching the minimum temperature for shower, of 35 deg C, whenever the solar radiation was above the 3,500 Wh m{sup -2}, for the majority of the studied days. (author)

  12. SISTEMA HÍBRIDO DE ENERGÍA UTILIZANDO ENERGÍA SOLAR Y RED ELÉCTRICA

    Directory of Open Access Journals (Sweden)

    JORGE DÍAZ RODRÍGUEZ

    2012-06-01

    Full Text Available En este trabajo se realiza el diseño y cálculo de los dispositivos de un sistema híbrido de energía, integrado por un generador fotovoltaico (arreglo de paneles solares, una fuente de energía convencional (red eléctrica, un banco de baterías para el almacenamiento de la energía proveniente del arreglo fotovoltaico y los respectivos dispositivos de control de las etapas y la interacción de las mismas. El sistema híbrido se constituye en una solución económica para un suministro confiable de electricidad. En el trabajo se enfatiza el diseño del inversor de potencia, se aportan datos necesarios para la selección o construcción de las partes eléctricas involucradas en la implementación de un convertidor multinivel de 81 escalones. Con el uso de este inversor se garantiza Un mejoramiento ostensible de la calidad de la energía eléctrica suministrada por el sistema híbrido.

  13. Plane-concentrators solar collectors: analysis of the heating performance using surface resistances; Coletores solares plano-concentradores: analise do desempenho termico utilizando resistencias superficiais

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, I M.M. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia; Hackenberg, C M [Universidade Federal do Rio de Janeiro, RJ (Brazil). Escola de Quimica

    1985-12-31

    In this work it is developed theoretical model which utilizes the Oppenheim concepts of surface and spatial resistances for thermal radiation transfer on solid surfaces in order to determine the heating performance of plane-concentrators solar collectors. It is shown that the shape factor for trapezoidal geometries, which includes the reflecting surfaces, may be utilized to determine the solar concentration chamber effective absorptivity with reasonable degree of accuracy. The experimental results measured on 2:1 plane-concentrators confirm the theoretical values. (author). 13 refs., 5 figs

  14. Plane-concentrators solar collectors: analysis of the heating performance using surface resistances; Coletores solares plano-concentradores: analise do desempenho termico utilizando resistencias superficiais

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, I.M.M. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia; Hackenberg, C.M. [Universidade Federal do Rio de Janeiro, RJ (Brazil). Escola de Quimica

    1984-12-31

    In this work it is developed theoretical model which utilizes the Oppenheim concepts of surface and spatial resistances for thermal radiation transfer on solid surfaces in order to determine the heating performance of plane-concentrators solar collectors. It is shown that the shape factor for trapezoidal geometries, which includes the reflecting surfaces, may be utilized to determine the solar concentration chamber effective absorptivity with reasonable degree of accuracy. The experimental results measured on 2:1 plane-concentrators confirm the theoretical values. (author). 13 refs., 5 figs

  15. Disinfection of water using solar energy (SODIS): inactivation and reactivation of bacteria; Desinfeccao de agua utilizando energia solar (SODIS): inativacao e recrescimento bacteriano

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Marcelo Jacomini Moreira da

    2004-07-01

    Besides being an available natural source, the solar energy is very applicable in places where there are bad recourses and low money resources, because there are not either the need of chemical products neither a huge cost (commercial materials can be re-used). To make this job we used re-used half painted black PET bottles with the variables: exposed to heat times: 1, 2, 4 e 6 hours and we used also a concentrator of rays of sunshine. The affluent control parameters were: turbidity, apparent color, temperature, total coliforms and E. coli. The effluent parameters were just the last three: temperature, total coliforms and E.coli. To asses the bacteria reactivation the water was kept in bottles for 24 hours, pretending a situation that is very common in brazilian rural houses. We conclude that the use of the concentrator of rays of sunshine can reduce the exposition to heat from 6 to 4 hours, without prejudice the SODIS efficiency and using the concentrator of rays of sunshine for 6 hours we can obtain the process of solar pasteurization (SOPAS), with a 70 deg C water temperature and stopping the re-growth of bacteria. We also observed that when there are clouds in the sky the incidence of solar radiation and the SODIS efficiency decrease, even if the water temperature is higher during the disinfection, although this factor does not mean a significant influence statistically. (author)

  16. Water pumping system using solar photovoltaic induction motor; Sistema de bombeamento de agua com energia solar fotovoltaica utilizando motor de inducao trifasico

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Eduardo Henrique Pereira de; Bezerra, Luiz Daniel Santos; Antunes, Fernando Luiz Marcelo [Universidade Federal do Ceara (DEE/PPGEE/UFC), Fortaleza, CE (Brazil). Dept. de Engenharia Eletrica. Programa de Pos -Graduacao em Engenharia Eletrica; Borges Neto, Manuel Rangel [Centro Federal de Educacao Tecnologica de Petrolina (CEFET), PE (Brazil)

    2008-07-01

    One of the main difficulties to people who live in remote areas or isolated community and not grid connected, certainly is to access potable drink water. In the world, more than 6000 children dies everyday by some kind of illnesses associated to non-potable drink water. At state of Ceara, during the dry weather periods, remain water reservoir becomes practically a mud puddle, as a result, people and animals are forced to drink this inappropriate water. To minimize this consequences in this periods some water is distributed by tankers but, sometimes, even this water is not enough potable. Underground water is an alternative to mitigate this problem. The most common technique is the use of direct current (DC) pumps set supplied by solar photovoltaic systems. However, this kind of pump-set is relatively expensive and too hard to maintain. This paper brings an alternative lower expensive and sustainable to water pumping system, it uses a three phase induction machine coupled to an underwater centrifugal pump supplied by solar photovoltaic energy system. (author)

  17. Disinfection of effluent of wastewater treated using solar energy (SODIS): evaluation of a solar concentrator device; Desinfeccao de efluentes com tratamento terciario utilizando energia solar (SODIS): avaliacao do uso do dispositivo para concentracao dos raios solares

    Energy Technology Data Exchange (ETDEWEB)

    Paterniani, Jose Euclides Stipp; Silva, Marcelo Jacomini Moreira da [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Faculdade de Engenharia Mecanica. Saneamento e Ambiente]. E-mail: pater@agr.unicamp.br

    2005-01-15

    Besides being an available natural resource, the solar energy is very applicable in places with few recourses and low money resources, because there aren't either the need of chemical products neither a huge cost (commercial materials can be reused). To make this job we re-used PET bottles half painted black with the variables: 1, 2, 4 and 6 hours of heat exposition and we also used a concentrator of rays of sunshine. The affluent control parameters were turbidity, apparent color, temperature, total coliforms and E. coli. These last three were evaluated before and after the disinfection process (effluent parameters). To assess the bacteria reactivation we kept the water in bottles for 24 hours, pretending a very common situation in Brazilian rural houses. We conclude that the use of the concentrator of rays of sunshine can reduce the heat exposition from 6 to 4 hours, without harm the SODIS efficiency. Using the concentrator of rays of sunshine for 6 hours we can obtain, besides SODIS, the process of solar pasteurization (SOPAS), which stops the re-growth of bacteria with a 70 deg C water temperature. We also observed that when the sky is cloudy the incidence of solar radiation and, therefore, the SODIS efficiency decrease, even if the water temperature is higher during the disinfection. Although, this factor doesn't mean a significant influence statistically. (author)

  18. Fatores protetores de adolescentes contra o uso de drogas com ênfase na religiosidade

    Directory of Open Access Journals (Sweden)

    Sanchez Zila Van der Meer

    2004-01-01

    Full Text Available Embora muitos estudos tenham retratado os fatores de risco ao uso de drogas, não tem sido dada a devida importância aos fatores de proteção, fundamentais para prevenção. Como o baixo nível socioeconômico é considerado fator de risco, o objetivo deste estudo foi identificar, entre adolescentes de baixo poder aquisitivo, quais seriam os fatores que pudessem preveni-los do consumo de drogas. Para essa investigação, adotou-se metodologia qualitativa e amostra intencional selecionada por critérios. Sessenta e dois jovens, usuários e não-usuários de drogas, foram submetidos à entrevista semi-estruturada. Entre os fatores protetores, a estrutura familiar e a religiosidade foram os mais freqüentemente citados. Quanto à religiosidade, foram observados os seguintes resultados: 81% dos não-usuários acreditam e praticam uma religião; entre os usuários, apenas 13% encontram-se nessa condição, atribuindo à prática religiosa um meio de abandono às drogas. Conclui-se que a religião pode ser um fator protetor relevante na amostra estudada, atuando como apoio na estruturação familiar e como importante fonte de informações.

  19. Fatores protetores de adolescentes contra o uso de drogas com ênfase na religiosidade

    Directory of Open Access Journals (Sweden)

    Zila Van der Meer Sanchez

    Full Text Available Embora muitos estudos tenham retratado os fatores de risco ao uso de drogas, não tem sido dada a devida importância aos fatores de proteção, fundamentais para prevenção. Como o baixo nível socioeconômico é considerado fator de risco, o objetivo deste estudo foi identificar, entre adolescentes de baixo poder aquisitivo, quais seriam os fatores que pudessem preveni-los do consumo de drogas. Para essa investigação, adotou-se metodologia qualitativa e amostra intencional selecionada por critérios. Sessenta e dois jovens, usuários e não-usuários de drogas, foram submetidos à entrevista semi-estruturada. Entre os fatores protetores, a estrutura familiar e a religiosidade foram os mais freqüentemente citados. Quanto à religiosidade, foram observados os seguintes resultados: 81% dos não-usuários acreditam e praticam uma religião; entre os usuários, apenas 13% encontram-se nessa condição, atribuindo à prática religiosa um meio de abandono às drogas. Conclui-se que a religião pode ser um fator protetor relevante na amostra estudada, atuando como apoio na estruturação familiar e como importante fonte de informações.

  20. Metodologia para simulação numérica de sistemas de aquecimento de água utilizando coletores solares planos

    OpenAIRE

    SILVA, Ana Cristina Goncalves Castro

    2008-01-01

    Os sistemas de aquecimento solar de água têm sido bastante utilizados para uso doméstico em residências, visto que, seu uso reduz custos de aquecimento de água e ainda é uma fonte renovável de energia. Todo coletor solar precisa ser caracterizado através de uma equação de desempenho. Para tal, deve ser analisado, numérica ou experimentalmente para que seja obtida sua curva característica de eficiência em função da temperatura de entrada e da radiação solar incidente no coletor....

  1. Análise de um sistema de aquecimento de água para residências rurais, utilizando energia solar

    OpenAIRE

    Basso,Luiz H.; Souza,Samuel N. M. de; Siqueira,Jair A. C.; Nogueira,Carlos E. C.; Santos,Reginaldo F.

    2010-01-01

    A conscientização da importância do meio ambiente tem incentivado o estudo de novas fontes energéticas renováveis e menos poluentes. Dentre essas fontes, a energia solar destaca-se por ser perene e limpa. A utilização da energia solar em sistemas de aquecimento de água residencial rural pode colaborar com a economia de energia elétrica, base da matriz energética brasileira. Conhecer os fatores que influenciam na operação de um sistema de aquecimento de água por energia solar é importante na d...

  2. Membrana de PLDLA-TMC como protetor na regeneração do tendão calcâneo: Estudo in vivo em coelhos

    Directory of Open Access Journals (Sweden)

    Julia Rezende Duek

    2014-06-01

    Full Text Available Um dos maiores problemas da cirurgia restauradora dos tendões flexores é evitar a formação de aderências, pois limita seu deslizamento. Assim, é muito desejável que a cicatrização ocorra o mais rápido possível, restaurando a capacidade de deslizamento dos tendões, sem limitações dos movimentos. O objetivo deste trabalho foi analisar a resistência do Tendão calcâneo, utilizando membrana de PLDLA-TMC como protetor da aderência dos tecidos adjacentes após implantes em coelhos New Zeland. Foram utilizados 20 coelhos, divididos em dois grupos, os quais foram submetidos à secção do tendão calcâneo e posterior sutura com técnica de Kessler modificada. No grupo A, logo após sutura o animal foi sacrificado e o tendão foi enviado para ensaio mecânico. Já no grupo B, após três semanas, os animais foram sacrificados e o material foi submetido à análise histológica. Os resultados obtidos a partir do ensaio mecânico mostraram melhora nos valores da resistência à tração dos implantes com a membrana, comparados aos apenas suturados. Na cicatrização da lesão, ocorreu melhor organização das fibras colágenas quando foi utilizado o polímero PLDLA-TMC, além de uma menor aderência cicatricial. Conclui-se que a membrana de PLDLA-TMC é promissora na reparação de lesões tendíneas.

  3. Avaliação de protetores físicos em semeadura direta de Pinus taeda L.

    Directory of Open Access Journals (Sweden)

    Vilmar Luciano Mattei

    2009-09-01

    Full Text Available Normal 0 21 false false false MicrosoftInternetExplorer4 O trabalho avalia a eficiência de protetores físicos de pontos, na implantação de Pinus taeda L. por semeadura direta. Como proteção foram utilizados o copo plástico, sem fundo, o  laminado de madeira e maravalha. Ambos colocados sobre pontos semeados com três  sementes cada. A análise de emergência, sobrevivência e número  de pontos com pelo menos uma planta, um ano após a semeadura,  demonstrou que a utilização de um protetor físico, é indispensável para evitar elevadas perdas de sementes, causadas por pássaros e pela movimentação do solo.

  4. Otimização de sistema de aquecimento solar de água em edificações residenciais unifamiliares utilizando o programa TRNSYS.

    OpenAIRE

    Juliana Benoni Arruda Lima

    2003-01-01

    Os sistemas de aquecimento solar de água têm sido amplamente utilizados no Brasil para uso doméstico em residências unifamiliares, aproveitando a energia potencial da água do reservatório superior e o fenômeno da termossifonagem para a circulação da água quente. Entretanto estes sistemas de aquecimento de água normalmente são dimensionados através de tabelas fornecidas pelos fabricantes que indicam o número de placas em função do tamanho da família e do número de pontos de utilização de água ...

  5. Tratamento de lixiviados de aterros de resíduos sólidos utilizando Processos Fenton e Foto-Fenton Solar

    Directory of Open Access Journals (Sweden)

    Fábio Moraes da Costa

    2015-01-01

    Full Text Available O lixiviado de aterros de resíduos sólidos urbanos é uma complexa mistura de substâncias orgânicas e inorgânicas, que em sua composição causam danos ao meio ambiente, devido à elevada concentração de matéria orgânica recalcitrante e à toxicidade presente. A proposta deste trabalho envolve a aplicação dos processos oxidativos avançados (POA, como tratamento de lixiviado oriundos de dois aterros sanitários, Gericinó (Rio de Janeiro/RJ e Gramacho (Duque de Caxias/RJ, dois aterros com mais de 30 anos de operação, sendo que o último encontra-se encerrado há 2 anos. O objetivo da utilização dos POA é melhorar a qualidade do lixiviado para um tratamento biológico subsequente, para isso foi utilizado o ensaio com a bactéria Aliivibrio fischeri para avaliação da toxicidade. Para o Processo Fenton-escuro, realizado em escala de bancada, nos experimentos realizados a pH=3,0 e razão Fe+2:H2O2 igual a 1:5 foram obtidas remoções de 56% e 19% de DQO para os lixiviados oriundos de Gericinó e Gramacho, respectivamente. Para o Processo Foto-Fenton Solar, realizado em uma planta piloto, nos testes a pH=3,0 e razão Fe+2:H2O2 igual a 1:5, foram alcançadas 88% e 78% de remoção de DQO. Essas condições permitiram uma diminuição da toxicidade dos lixiviados pa ra valores de coeficiente de efeito igual a 50% (CE 50% para Aliivibrio fischeri maior que 50%, indicando um lixiviado mais adequado para tratamento biológico posterior.

  6. O efeito protetor do bicarbonato de sodio na nefropatia induzida por contraste radiologico em ratos

    Directory of Open Access Journals (Sweden)

    Maria de Fatima Fernandes Vattimo

    2013-06-01

    Full Text Available Contrastes radiológicos iodados - CI são causa de lesão renal aguda - LRA. Avaliar o efeito renoprotetor do bicarbonato de sódio (Bic sobre a função renal (clearance de creatinina, Jaffé, Clcr-ml/min/100g e o perfil oxidativo (excreção de peróxidos, PU e de malondealdeído urinários, FOX-2 e TBARs, nmol/mgCr em ratos com CI. Ratos machos adultos Wistar, 250-300g, tratados 1x/dia, por 5 dias, foram divididos nos grupos: Salina (solução salina 0,9%, 3ml/kg/dia, intraperitoneal-i.p.; CI (ioxitalamato de meglumina e sódio, 3ml/kg, i.p; Bic+Salina (Bic 3ml/kg, i.p, 1 hora antes e 1 hora depois da Salina; Bic+CI (Bic 3ml/kg, i.p, 1 hora antes e 1 hora depois do CI. CI induziu LRA e o Bic confirmou seu efeito renoprotetor antioxidante (Clcr/TBARs/PU Salina: 0,59±0,03/0,11±0,02/1,29±0,24 vs Bic+Salina 0,58±0,03/0,13±0,02/1,32±0,64 vs CI 0,22±0,02A/0,19±0,02A/4,77±0, 24A vs Bic+CI 0,51±0,04B/0,13±0,3B/1,80± 0,04B, A/B p<0,05. O Bic confirmou efeito protetor na LRA por CI, podendo ser considerado como possibilidade terapêutica para pacientes submetidos a CI.

  7. Análise de um sistema de aquecimento de água para residências rurais, utilizando energia solar A water heating system analysis for rural residences, using solar energy

    Directory of Open Access Journals (Sweden)

    Luiz H. Basso

    2010-02-01

    Full Text Available A conscientização da importância do meio ambiente tem incentivado o estudo de novas fontes energéticas renováveis e menos poluentes. Dentre essas fontes, a energia solar destaca-se por ser perene e limpa. A utilização da energia solar em sistemas de aquecimento de água residencial rural pode colaborar com a economia de energia elétrica, base da matriz energética brasileira. Conhecer os fatores que influenciam na operação de um sistema de aquecimento de água por energia solar é importante na determinação de sua viabilidade técnica, visando a sua difusão em residências rurais. Para tanto, construiu-se um protótipo, no câmpus da Faculdade Assis Gurgacz, em Cascavel - PR, com características similares a um equipamento utilizado em residências para dois habitantes, para funcionar com circulação natural ou termossifão e sem auxílio de sistema de aquecimento complementar. O equipamento mostrou-se viável tecnicamente, alcançando a temperatura mínima para banho de 35 °C, sempre que a radiação solar foi superior a 3.500 Wh m-2, o que aconteceu para a maioria dos dias estudados.The awareness of the importance of the environment has stimulated the study of new renewed energy sources and less pollutant. Amongst these sources, solar energy stands alone for being perennial and clean. The use of solar energy in systems of agricultural residential water heating, can complement the economy of electric energy, base of the Brazilian energy matrix. Knowing the factors that influence the operation of a system of water heating by solar energy is important in determining their technical viabilities targeting their distribution in agricultural residences. To evaluate equipment of water heating for solar energy, a prototype was constructed in the campus of Assis Gurgacz College, in Cascavel,State of Paraná, Brazil, with similar characteristics to equipment used in residences for two inhabitants, to function with natural circulation or

  8. Uma nova metodologia para dimensionamento de sistemas híbridos de energia (solar-eólica utilizando ferramentas de simulação e otimização - DOI: 10.4025/actascitechnol.v27i1.1506

    Directory of Open Access Journals (Sweden)

    Carlos Eduardo Camargo Nogueira

    2005-03-01

    Full Text Available Este trabalho apresenta uma nova metodologia para dimensionamento de sistemas híbridos de energia (solar-eólica com armazenamento em banco de baterias, utilizando ferramentas de simulação e otimização. O modelo desenvolvido é útil para a energização de áreas rurais isoladas e resulta num sistema com custo mínimo e alta confiabilidade, baseado no conceito de perda de fornecimento de energia à carga (LPSP aplicado para horas consecutivas. Alguns cenários são calculados e comparados, utilizando-se diferentes períodos de horas consecutivas e diferentes valores de LPSP. Os resultados apresentam um dimensionamento completo do sistema e uma avaliação de custos ao longo de vários anos

  9. Irreversibility analysis of non isothermal flat plate solar collectors for air heating with a dimensionless model; Analisis de las irreversibilidades en colectores solares de placas planas no isotermicos para calentamiento de aire utilizando un modelo adimensional

    Energy Technology Data Exchange (ETDEWEB)

    Bracamonte-Baran, Johane Hans; Baritto-Loreto, Miguel Leonardo [Universidad Central de Venezuela (Venezuela)]. E-mails: johanehb@gmail.com; johane.bracamonte@ucv.ve; miguel.baritto@ucv.ve

    2013-04-15

    The dimensionless model developed and validated by Baritto and Bracamonte (2012) for the thermal behavior of flat plate solar collector without glass cover is improved by adding the entropy balance equation in a dimensionless form. The model is solved for a wide range of aspect ratios and mass flow numbers. A parametric study is developed and the distribution of internal irreversibilities along the collector is analyzed. The influence of the design parameters on the entropy generation by fluid friction and heat transfer is analyzed and it is found that for certain combinations of these parameters optimal thermodynamic operation can be achieved. [Spanish] En el presente trabajo, el modelo adimensional desarrollado y validado por Baritto y Bracamonte (2012) para describir el comportamiento termico de colectores solares de placas planas sin cubierta transparente, se complementa con la ecuacion adimensional de balance de entropia para un elemento diferencial de colector solar. El modelo se resuelve para un amplio rango de valores de relaciones de aspecto y numero de flujo de masa. A partir de los resultados del modelo se desarrolla un analisis detallado de la influencia de estos parametros sobre la distribucion de irreversibilidades internas a lo largo del colector. Adicionalmente se estudia la influencia de estos parametros sobre los numeros de generacion de entropia por friccion viscosa, por transferencia de calor y total. Se encuentra que existen combinaciones de los parametros antes mencionados, para los cuales, la operacion del colector es termodinamicamente optima para numeros de flujo de masa elevados.

  10. Esferas de quitosana/Fe na degradação do corante Azul QR-19 por processos foto-Fenton utilizando luz artificial ou solar Chitosan/Fe spheres on the Blue QR-19 dye degradation by photo Fenton processes using artificial or solar light

    Directory of Open Access Journals (Sweden)

    Kely V. de Souza

    2010-09-01

    Full Text Available A contaminação dos recursos hídricos é um dos maiores problemas ambientais da atualidade. Dentre as várias fontes poluidoras, destacam-se as indústrias têxteis, por serem fontes geradoras de grandes volumes de efluentes, muitas vezes tratados de maneira ineficiente. A principal causa do grande impacto ambiental decorrente deste descarte é a presença dos corantes, tais como os compostos do tipo azo, que podem gerar subprodutos de caráter carcinogênico e/ou mutagênico, ou como os de base antraquinona, que são muito resistentes à degradação natural e portanto persistem no efluente por um longo tempo. O objetivo do presente trabalho consiste na utilização de processos foto-Fenton assistidos por luz artificial e solar, utilizando ferro imobilizado em esferas de quitosana reticulada com glutaraldeído, para promover a degradação do corante reativo Azul QR-19, de base antraquinona, em solução aquosa. As esferas obtidas apresentaram tamanho regular com diâmetro de 4,0 mm. Os resultados demonstraram 90% de descoloração do sistema em 180minutos e redução de 60% do teor de carbono orgânico total (COT, para o sistema foto-Fenton utilizando luz artificial. Para o sistema fotoassistido com luz solar, a descoloração foi integralmente obtida em 120 minutos com 70% de redução do teor de COT. Foi observado que o ferro permaneceu na matriz após o tratamento, possibilitando sua reutilização.The contamination of water resources is one of the greatest environmental problems today. Among the polluting sources are the textile industries due to the production of large volumes of effluent, often treated inefficiently. The main reason for the environmental impact of the rejected materials is the presence of dyes such as azo reactive compounds that can generate by-products with carcinogenic and mutagenic effects. They may also include anthraquinone type compounds, which are highly resistant to degradation and persist in the effluent for a

  11. A new methodology for sizing hybrid photovoltaic-wind energy system using simulation and optimization tools = Uma nova metodologia para dimensionamento de sistemas híbridos de energia (solar-eólica utilizando ferramentas de simulação e otimização

    Directory of Open Access Journals (Sweden)

    Samuel Nelson Melegari de Souza

    2005-01-01

    Full Text Available This paper presents a new methodology for sizing an autonomousphotovoltaic-wind hybrid energy system with battery storage, using simulation and optimization tools. The developed model is useful for energizing remote rural areas and produces a system with minimum cost and high reliability, based on the concept of Loss of Power Supply Probability (LPSP applied for consecutive hours. Some scenarios arecalculated and compared, using different numbers of consecutive hours and different LPSP values. As a result, a complete sizing of the system and a long-term cost evaluation are presented.Este trabalho apresenta uma nova metodologia para dimensionamento de sistemas híbridos de energia (solar-eólica com armazenamento em banco de baterias, utilizando ferramentas de simulação e otimização. O modelo desenvolvido é útil para a energização de áreas ruraisisoladas e resulta num sistema com custo mínimo e alta confiabilidade, baseado no conceito de perda de fornecimento de energia à carga (LPSP aplicado para horas consecutivas. Alguns cenários são calculados e comparados, utilizando-se diferentes períodos de horas consecutivas e diferentes valores de LPSP. Os resultados apresentam um dimensionamento completo do sistema e uma avaliação de custos ao longo de vários anos.

  12. A variedade da dieta é fator protetor para a pressão arterial sistólica elevada

    Directory of Open Access Journals (Sweden)

    Erick Prado de Oliveira

    2012-04-01

    Full Text Available FUNDAMENTO: A dieta influencia diretamente a hipertensão arterial (HAS, que é um dos principais fatores de risco da doença cardiovascular. OBJETIVO: Associar a HAS com fatores dietéticos de adultos clinicamente selecionados para programa de mudança de estilo de vida. MÉTODOS: Estudo transversal composto por 335 indivíduos, com idade entre 44 e 65 anos, clinicamente selecionados para um programa de mudança de estilo de vida. Foram avaliados os dados antropométricos (IMC, % de gordura e circunferência abdominal, os componentes bioquímicos (concentrações plasmáticas de glicose, triglicerídeos, colesterol total, HDL-c e LDL-c e a dieta, por meio do recordatório de 24 horas. A qualidade da dieta foi avaliada pelo Índice de Alimentação Saudável. A pressão arterial foi mensurada de acordo com a V Diretriz Brasileira de Hipertensão Arterial e classificada de acordo com o NCEP-ATPIII. A regressão logística foi realizada para determinar a probabilidade de alterações na PAS e PAD de acordo com a ingestão dietética. Adotou-se como significante o valor de p < 0,05. RESULTADOS: Observou-se correlação positiva da pressão arterial diastólica com o consumo de colesterol e açúcar; e negativa com a ingestão de fibras, porções de óleo e qualidade da dieta. A variedade da dieta ≥ 8 itens alimentares apresentou efeito protetor para alterações da pressão arterial sistólica; OR = 0,361 (0,148-0,878. CONCLUSÃO: A maior variedade da dieta ofereceu efeito protetor para alteração da pressão arterial sistólica.

  13. Desinfecção de efluentes com tratamento terciário utilizando energia solar (SODIS: avaliação do uso do dispositivo para concentração dos raios solares Disinfection of effluent of wastewater treated using solar energy (SODIS: evaluation of a solar concentrator device

    Directory of Open Access Journals (Sweden)

    José Euclides Stipp Paterniani

    2005-03-01

    Full Text Available A energia solar, além de ser uma fonte natural disponível, é perfeitamente aplicável para desinfecção de águas em regiões menos favorecidas em infra-estrutura e recursos financeiros, uma vez que não há necessidade da dosagem de produtos químicos e não há custo já que materiais comerciais descartados podem ser reutilizados. O presente trabalho utilizou garrafas PET transparentes com a metade pintada de preto, sendo consideradas como variáveis do processo de desinfecção por ação da luz solar: tempos de exposição 1, 2, 4 e 6 horas e o uso de um concentrador de raios solares. Os parâmetros de controle do processo de desinfecção foram turbidez, cor aparente, temperatura, coliformes totais e E. coli, sendo os três últimos parâmetros avaliados antes e após o processo. Para a avaliação de reativação bacteriana a água foi armazenada em moringas de mesa por 24 horas, simulando uma situação comum nas residências rurais brasileiras. Os resultados mostraram que o uso do concentrador solar permite reduzir o tempo de exposição ao sol de 6 para 4 horas, sem prejuízo da eficiência do SODIS. Sendo utilizado o concentrador solar com tempo de exposição de 6 horas tem-se, além do processo de desinfecção, o processo de pasteurização solar (SOPAS, permitindo assim a utilização deste para potabilização da água. Também foi observado que a presença de nuvens reduz a incidência de radiação solar e, portanto, a eficiência do SODIS. Esta última ocorre mesmo com a água atingindo temperatura mais elevada durante a desinfecção.Besides being an available natural resource, the solar energy is very applicable in places with few recourses and low money resources, because there aren't either the need of chemical products neither a huge cost (commercial materials can be reused. To make this job we re-used PET bottles half painted black with the variables: 1, 2, 4 and 6 hours of heat exposion and we also used a

  14. Efeito protetor da lactoferrina humana no trato gastrintestinal Efecto protector de la lactoferrina humana en el sistema gastrointestinal Protective effect of human lactoferrin in the gastrointestinal tract

    Directory of Open Access Journals (Sweden)

    Valterlinda Alves de O. Queiroz

    2013-03-01

    Full Text Available OBJETIVO: Descrever os mecanismos de ação da lactoferrina humana na proteção de morbidades gastrintestinais. FONTES DE DADOS: Revisão não sistemática da literatura utilizando como estratégia de busca pesquisa bibliográfica em bases de dados, as quais incluíram SciELO, Lilacs e MedLine entre 1990 e 2011. Os descritores utilizados foram: lactoferrina, leite materno/humano, gastrintestinal e imunidade, nos idiomas português e inglês. SÍNTESE DOS DADOS: A lactoferrina é a segunda proteína predominante no leite humano, com concentrações mais elevadas no colostro (5,0 a 6,7mg/mL em relação ao leite maduro (0,2 a 2,6mg/mL. Em contraste, o leite de vaca contém teores inferiores, 0,83mg/mL no colostro e 0,09mg/mL no leite maduro. A lactoferrina desempenha diversas funções fisiológicas na proteção do trato gastrintestinal. A atividade antimicrobiana está relacionada à capacidade de sequestrar ferro dos fluidos biológicos e/ou de desestruturar a membrana de micro-organismos. A lactoferrina possui também a capacidade de estimular a proliferação celular. A ação anti-inflamatória desempenhada pela lactoferrina está associada à capacidade de penetrar no núcleo do leucócito e bloquear a transcrição do fator nuclear Kappa B. Diante da importância da lactoferrina na prevenção de doenças infecciosas em crianças aleitadas ao peito, a indústria vem, por meio da engenharia genética, desenvolvendo tecnologias para expressar esta proteína recombinante humana em plantas e animais, na tentativa de adequar a composição das fórmulas infantis àquela do leite humano. CONCLUSÕES: A lactoferrina humana é um peptídeo com potencial para prevenir morbidades, especialmente às gastrintestinais. Evidências científicas dos efeitos protetores da lactoferrina humana fortalecem ainda mais a recomendação para prática do aleitamento materno.OBJETIVO: Describir los mecanismos de acción de la lactoferrina humana en la protecci

  15. Degradação do pesticida Padron® por processos fotoquímicos utilizando luz artificial e solar Degradation of Padron® by photochemical processes using artificial and sunlight radiation

    Directory of Open Access Journals (Sweden)

    Silvio César Godinho Teixeira

    2007-01-01

    Full Text Available Destruction of Padron® (dye and picloram was evaluated using a photoreactor and a solar reactor. Photolysis was observed using only a germicide lamp (GL. Black light (BL and H2O2 (172 mmol L-1 promoted a conversion of 49% and 6% of dye and picloram, respectively. Photocatalytic processes were more efficient using TiO2/GL (96%-dye; 60%-picloram than TiO2/BL (44%-dye; 40%-picloram. Photolysis using sunlight was not observed during PadronÒ recirculation in the reactor constructed with four borosilicate tubes. Meanwhile, adding H2O2 resulted in 12% conversion of dissolved organic compounds. Finally, the most efficient mineralization (60% was obtained using the Fenton reaction ( H2O2-176 mmol L-1; FeSO4x6H2O-90 mmol L-1 and sunlight.

  16. Observação do abrilhantamento de limbo solar e de estruturas filamentares em 48 ghz utilizando a técnica de regularização adaptativa

    Science.gov (United States)

    Machado, W. R. S.; Mascarenhas, N.; Costa, J. E. R.; Silva, A. V. R.

    2003-08-01

    O radiotelescópio do Itapetinga tem sido utilizado em campanhas de observações de explosões solares gerando um grande número de mapas diários em 48 GHz como sub-produto destas observações. A resolução espacial do telescópio de 14m do Itapetinga nesta freqüência é de aproximadamente dois minutos de arco. Estruturas de interesse para análise da atmosfera solar quiescente tais como os filamentos e o anel de abrilhantamento do limbo são de dimensão angular moderada da ordem ou ligeiramente menores que a resolução do telescópio. É conhecido que a convolução da função de espalhamento do telescópio, PSF (padrão de ganho do feixe) borra as estruturas de dimensão angular abaixo do HPBW (largura a meia potência do feixe) e portanto é comum a busca por técnicas de restauração que eliminem pelo menos em parte este borramento. Estudamos a restauração destas radioimagens usando a técnica de regularização adaptativa e os resultados ressaltam estas estruturas espaciais de pequeno contraste. O algoritmo da regularização adaptativa faz uso de k imagens, chamadas protótipos, obtidas através da variação de parâmetros de um filtro de regularização. Para controle da qualidade da restauração utilizamos uma imagem de alta resolução espacial obtida na linha H-a e a PSF do Itapetinga para borrá-la. Pequenos desvios, entre a PSF utilizada para o borramento e a PSF utilizada na restauração, produziram alguns desvios notáveis na imagem restaurada porém a adição de ruído nas simulações de restauração foram mais influentes no cálculo da rugosidade da imagem e portanto mais limitante para a restauração. Apresentamos como nosso primeiro resultado uma imagem em 48 GHz com a presença clara do abrilhantamento de limbo que não estava evidente na imagem original e traços de estruturas filamentares, porém ainda sem grande evidência.

  17. Eficácia da escolha do protetor auditivo pequeno, médio e grande em programa de conservação auditiva Efficacy in the choice of small, medium or large auricular protector under auditive conservation program

    Directory of Open Access Journals (Sweden)

    Marleide Aparecida Griggio Rodrigues

    2006-12-01

    Full Text Available OBJETIVO: verificar a eficácia da escolha do protetor auditivo por tamanhos Pequeno, Médio, Grande em um programa de conservação auditiva. MÉTODO: fizeram parte do estudo 30 indivíduos com audição normal previamente avaliados, de 18 a 45 anos de idade, sendo 15 do gênero feminino e 15 do gênero masculino, de Indústria Moveleira. Os sujeitos foram submetidos à avaliação audiológica convencional, audiometria em campo livre sem protetor auricular de inserção, com protetor tamanho universal e com tamanho adequado a cada indivíduo. Para análise estatística foi aplicado teste T Paramétrico para análise das diferenças. RESULTADOS: O teste T Paramétrico pareado, mostrou significância, na comparação dos protetores auriculares na freqüência de 4KHz. CONCLUSÃO: os resultados mostraram eficácia dos protetores auriculares pequeno e grande sobre os protetores tamanho universal em um programa de conservação auditiva.PURPOSE: to check the efficacy in the choice of small, medium or large auricular protector under auditive conservation program. METHODS: 30 individuals, between 18 to 45-year old, with normal hearing, were part of the study previously evaluated: 15 women and 15 men, all working in a furniture industry. The individuals were submitted to the conventional audiological evaluation, audiometry in free field without auricular insertion protector, with universal size protector and with size adequate to each individual. For statistical analysis we used Parametric T test for analyzing the differences. RESULTS: the Parametric T test showed significance, during the comparison of the auricular protectors in the frequency of 4KHz. CONCLUSION: these results demonstrate efficacy in choice of small, medium or large auditive protector, under auditive conservation program.

  18. Comparative study on systems of residual water treatment in the process industry by evaporation, using fossils fuels or solar energy; Estudio comparativo sobre sistemas de tratamiento de aguas residuales de la industria de procesamiento por evaporacion, utilizando combustibles fosiles o energia solar

    Energy Technology Data Exchange (ETDEWEB)

    Landgrave Romero, Julio; Canseco Contreras, Jose [Facultad de Quimica, UNAM (Mexico)

    1996-07-01

    The residual water treatment of the process industry, nowadays is an imminent necessity in our country. In the present study two different forms are considered to concentrate residual waters: multiple effect evaporation and solar evaporation. The use of solar evaporation lagoons is a good possibility to conserving energy by means of the diminution of fossil fuel consumption. The design basis of the evaporation systems via multiple effect, as well as solar evaporation, the results of the respective sizing and the estimation of the corresponding costs are presented. A practical case is described on the cooking of cotton linters (flock) [Spanish] El tratamiento de aguas residuales de la industria de proceso, hoy en dia es una necesidad inminente en nuestro pais. En el presente trabajo se consideran dos formas distintas para concentrar las aguas residuales: evaporacion de multiple efecto y evaporacion solar. El empleo de lagunas de evaporacion solar es una buena posibilidad para conseguir el ahorro de energia mediante disminucion del consumo de combustibles fosiles. Se presentan las bases de diseno de los sistemas de evaporacion via multiple efecto, asi como solar, los resultados del dimensionamiento respectivo y la estimacion de los costos correspondientes. Se describe un caso practico sobre el cocido de linters de algodon (borra)

  19. Fatores protetores e de risco envolvidos na transmissão vertical do HIV-1 Protective and risk factors related to vertical transmission of the HIV-1

    Directory of Open Access Journals (Sweden)

    Rosângela P. Gianvecchio

    2005-04-01

    Full Text Available Este estudo avalia os fatores maternos e fetais envolvidos na transmissão vertical do HIV-1 em 47 pares de mãe e filho. As variáveis comportamentais, demográficas e obstétricas foram obtidas mediante entrevista; os dados referentes ao parto e ao recém-nascido, dos prontuários das maternidades. Durante o terceiro trimestre de gestação foi realizada a contagem da carga viral materna e dos linfócitos T CD4+. A média de idade foi de 25 anos e 23,4% das gestantes eram primigestas, e o fator comportamental mais prevalente foi não usar preservativos. Dentre as gestantes, 48,9% tinham células CD4+ superior a 500 células/mm³ e 93,6% se enquadravam na categoria clínica A; 95,7% submeteram-se à profilaxia com zidovudina durante a gestação ou no parto, a qual foi ministrada a todos os recém-nascidos; 50,0% delas foram submetidas à cesárea eletiva. Apesar de expostas a vários fatores de risco e protetores, nenhuma criança tornou-se infectada. A transmissão vertical resulta de um desequilíbrio entre os fatores, com predomínio dos de risco sobre os protetores.This study aimed to evaluate maternal and fetal factors related to vertical transmission of HIV-1. Participants included 47 mother-child pairs. Behavioral, demographic, and obstetric data were obtained through interviews. Data related to delivery and newborns were collected from registries in the maternity hospitals. During the third trimester of pregnancy, CD4+ T lymphocytes and maternal viral load were measured. Mean age of the mothers was 25 years and 23.4% of the pregnant women were primigravidae. The most prevalent behavioral factor was lack of condom use. 48.9% of the women presented a CD4+ count greater than 500 cells/ mm³, and 93.6% belonged to clinical category A. 95.7% of the women received zidovudine prophylaxis during pregnancy or childbirth, and the medication was also administered to all the neonates. 50.0% of patients were submitted to elective cesareans. Despite

  20. Stability of Citrus tristeza virus protective isolates in field conditions Estabilidade de isolados protetores contra Citrus tristeza virus em condições de campo

    Directory of Open Access Journals (Sweden)

    Alessandra Tenório Costa

    2010-07-01

    Full Text Available The objective of this work was to monitor the maintenance of Citrus tristeza virus (CTV protective isolates stability in selected clones of 'Pêra' sweet orange (Citrus sinensis, preimmunized or naturally infected by the virus, after successive clonal propagations. The work was carried out in field conditions in the north of Paraná State, Brazil. Coat protein gene (CPG analysis of 33 isolates collected from 16 clones of 'Pêra' sweet orange was performed using single strand conformational polymorphism (SSCP. Initially, the isolates were characterized by symptoms of stem pitting observed in clones. Then viral genome was extracted and used as template for the amplification of CPG by reverse transcription polimerase chain reaction (RTPCR. RTPCR products electrophoretic profiles were analyzed using the Jaccard coefficient and the UPGMA method. The majority of the clones had weak to moderate stem pitting symptoms and its CTV isolates showed alterations in the SSCP profiles. However, the stability of the protective complex has been maintained, except for isolates from two analised clones. Low genetic variability was observed within the isolates during the studied years.O objetivo deste trabalho foi monitorar a manutenção da estabilidade de isolados protetores contra Citrus tristeza virus (CTV em clones selecionados de laranja 'Pêra' (Citrus sinensis pré-imunizados ou infectados naturalmente pelo vírus, após sucessivas propagações clonais. O trabalho foi realizado em condições de campo, no norte do Estado do Paraná. A análise do gene da capa protéica (GPC de 33 isolados, coletados de 16 clones de laranjeira 'Pêra', foi realizada com o uso da técnica polimorfismo conformacional da fita simples (SSCP. Inicialmente, os isolados foram caracterizados por meio de sintomas de caneluras observados nos clones. Em seguida, o genoma viral foi extraído e utilizado como molde para a amplificação do GCP com uso da transcrição reversa da rea

  1. Project of air conditioning system by absorption of water-lithium bromide using solar energy and simulation of its operation under several conditions; Projeto de sistema para condicionamento de ar por absorcao de agua-brometo de litio utilizando energia solar e simulacao de sua operacao sob condicoes diversas

    Energy Technology Data Exchange (ETDEWEB)

    Sbravati, Alan; Figueiredo, Jose Ricardo [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica. Dept. de Energia]. E-mails: alan@fem.unicamp.br; jrfigue@fem.unicamp.br

    2000-07-01

    This article presents computational models for water - lithium bromide absorption air conditioning systems, verifying the use of solar energy as source of heat for the cycle. Four different models were elaborated for the cycle, changing the configurations and hypotheses. In each model two algorithms were elaborated: the first one accomplished the calculations of the heat and mass flows and a estimative of the areas heat transfer, a project of a system, and another which, based on the answers of the first, simulate the behavior of this system when the conditions of initial project are changed, keeping constant the constructive parameters. As in the project a numeric procedure has been used for solution of non lineal systems based on the algorithm of Newton-Raphson. The main alteration among the models went to substitution of the expansion device and evaporator, and, in the fourth model, was increased a procedure for calculation of the solar collector performance. (author)

  2. Prediction of daily UV-A from daily global solar irradiance using the Ktuv and Kt clearness index; Prediccion de valores diarios de radiacion solar UV-A (295-385 nm) utilizando los indices de transparencia K{sub t}uv y K{sub t} y tecnicas de resdes neuronales artificiales

    Energy Technology Data Exchange (ETDEWEB)

    Barbero, F. J.; Lopez, G.; Batlles, F. J.

    2004-07-01

    In this work we compare two methodologies in order to estimate daily UV-A from daily global solar irradiance measurements. The first one is based on standard statistical procedures for relating the daily clearness indices Ktuv and Kt and the relative air mass, whereas the second methodology is based on the novel techniques of artificial neuronal networks. In both cases, we employed data recorded at the radiometric station located at the University of Almeria between 1993 and 1996. Both models are checked against data for years not previously used. (Author)

  3. Ambientes virtuales de aprendizaje utilizando realidad aumentada

    Directory of Open Access Journals (Sweden)

    Diana Nancy Martínez García

    2018-03-01

    Full Text Available Realidad aumentada o Augmented reality es una nueva tecnología que al combinarla con espacios físicos permite ampliar el espectro de la información relacionada con dichos espacios; esto se hace a través de la superposición de imágenes, información o material audiovisual específico aplicado a cualquier área de conocimiento. Los ambientes virtuales de aprendizaje basados en realidad aumentada prometen innovación debido a que transforman los escenarios de aprendizaje real mediante el uso de nuevas tecnologías aplicadas al ámbito educativo, complementando de esta manera la percepción e interacción con el mundo real; logrando el acceso a nuevos contenidos prescindiendo de recursos físicos. En cuanto al uso de la realidad aumentada aplicada al área de enfermería, existe un sinnúmero de herramientas para complementar una clase magistral y enriquecer el proceso de aprendizaje. Sin embargo, la mayoría de los desarrollos realizados utilizando realidad aumentada proviene de contextos diferentes al nuestro, por lo que resulta importante fomentar el uso de este tipo de herramientas para que suscite el interés de los desarrolladores locales de tecnologías aplicadas al ámbito educativo y más específicamente el de salud. El objetivo de la presente revisión fue fundamentar teóricamente acerca de los ambientes virtuales de aprendizaje utilizando aplicaciones basadas en realidad aumentada.

  4. Avaliação do conhecimento em odontologia e educação física acerca dos protetores bucais Assessment of odontology and physical education undergraduation students knowledge on mouth guard

    Directory of Open Access Journals (Sweden)

    Sérgio Rodrigues Sizo

    2009-08-01

    Full Text Available Este estudo teve o propósito de avaliar o nível de conhecimento de 150 alunos de graduação dos cursos de Odontologia e Educação Física acerca dos protetores bucais no município de Belém, Brasil. Além disso, objetivou-se promover maior informação a esses futuros profissionais, por meio de palestras e distribuição de folders, nas quais o foco principal eram os protetores bucais, suas indicações, seus tipos, sua higienização e armazenamento. Os participantes da pesquisa pertenciam ao último ano de seus referidos cursos de graduação. A análise dos resultados permitiu evidenciar que 68% dos alunos entrevistados ainda não possuem informação adequada acerca dos protetores bucais, mas que, apesar disso, em sua maioria são conscientes quanto aos riscos a que vários atletas são submetidos em esportes que exigem impacto físico. Os autores acreditam que é extremamente importante que haja maior divulgação da importância da utilização de protetores bucais na prática esportiva, visando a prevenção e a promoção de saúde da população em geral.This study had the aim to assess the level of knowledge of 150 Odontology and Physical Education undergraduation students concerning mouth guards in the city of Belém, Brazil. Besides that, we tried to provide further information to these future professionals through speeches and distribution of folders in which the main focus was the mouth guards, their indications, types as well as hygienization and storage. The participants in the research were in the last year of their specific undergraduation courses. The analysis of the results showed that 68% of the interviewed students still do not have suitable information on the mouth guards, but despite of that, in their majority they are aware of the risks many athletes face in sports which have physical impact. The authors believe the spread of the information on the use of mouth guards in sportive practice is relevant and aims to

  5. Analysis of the thermal performance of a solar heating system using a collector with absorbing surface in plates coated with PVC; Analise do desempenho termico de um sistema de aquecimento solar utilizando coletor com superficie absorvedora em chapas de forro de PVC

    Energy Technology Data Exchange (ETDEWEB)

    Reis, Edmilson Pedreira dos

    2009-08-15

    It is presented a solar collector to be used in a system for heating bath water, whose main characteristic is its low cost. The collector consists of five plates of PVC with 10 mm thick, 200 mm wide and 1400 mm length, with ao area equal to 1,4 square meters. The plates were connected in parallel to the ends of PVC tubes of 40 mm diameter and 32 mm diameter. The plates were coated on one side with aluminum sheets of soft drinks and beers cans open. The system worked on a thermosyphon and was tested in two configurations: the plates uncoated and coated with aluminum material, to determine the influence of material on the efficiency of the collector. For both configurations was used EPS plates below the surface to minimize heat losses from the bottom. The thermal reservoir of the heating system is, also, alternative and of low cost, since it was constructed from a polyethylene tank for storing water, with volume of 150 end 200 liters. It will be presented the thermal efficiency, heat loss, water temperature of the thermal reservoir at the end of the process and simulation of baths for a house with four residents. It will be demonstrated the thermal, economic and material viability of the proposed collector, whose main innovation is the use of recyclable materials, cans of beer and soft drinks, to increase the temperature of the absorber plate. (author)

  6. Chitosan/Fe spheres on the blue QR-19 dye degradation by photo Fenton processes using artificial or solar light; Esferas de quitosana/Fe na degradacao do corante azul QR-19 por processos foto-Fenton utilizando luz artificial ou solar

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Kely V. de; Zamora, Patricio G.P.; Zawadzki, Sonia F. [Universidade Federal do Parana (DQ/UFPR), Curitiba, PR (Brazil). Dept. de Quimica], E-mail: zawadzki@quimica.ufpr.br

    2010-07-15

    The contamination of water resources is one of the greatest environmental problems today. Among the polluting sources are the textile industries due to the production of large volumes of effluent, often treated inefficiently. The main reason for the environmental impact of the rejected materials is the presence of dyes such as azo reactive compounds that can generate by-products with carcinogenic and mutagenic effects. They may also include anthraquinone type compounds, which are highly resistant to degradation and persist in the effluent for a long time. The purpose of this study is the use of photo-Fenton processes assisted by artificial or solar light, using immobilized iron on chitosan beads, crosslinked with glutaraldehyde, for the anthraquinone type compound Blue QR-19 standard dye degradation in aqueous solutions. The obtained spheres showed a regular size and 4.0 mm diameter. The results showed 90% discoloration of the system within 180 minutes and a 60% total organic carbon (TOC)reduction for the photo-Fenton system using artificial light. For the system using sunlight, the total discoloration was achieved in 120 minutes and the TOC value decreased 70%. Also observed was that iron remained in the polymeric matrix after the treatment, thus allowing reuse. (author)

  7. Estudo dos efeitos adversos e do efeito protetor da vacina contra influenza em idosos vacinados pela rede pública no município de Tubarão, Estado de Santa Catarina

    Directory of Open Access Journals (Sweden)

    Talita Siemann Santos Pereira

    2011-02-01

    Full Text Available INTRODUÇÃO: O presente estudo buscou identificar os efeitos adversos e o efeito protetor da vacina contra influenza, em idosos acima de 60 anos, aplicada pela rede pública no município de Tubarão, Santa Catarina. MÉTODOS: Foi realizada uma coorte prospectiva de pacientes durante o período de maio a setembro de 2008. Foram recrutados 341 idosos, sendo 289 vacinados na rede pública (VSUS e 52 não vacinados (NV. A incidência do efeito protetor foi verificada através da comparação dos grupos VSUS com os NV. RESULTADOS: Um percentual de 22,5% de pacientes apresentou pelo menos um efeito adverso. Comparando o grupo VSUS e NV quanto à incidência de sintomas gripais durante o inverno, a presença de pelo menos um sintoma foi verificada em 47% e 28,8% (RR = 1,11; 1,02-1,22; p = 0,0156, respectivamente. CONCLUSÕES: Os resultados apontam uma baixa incidência de efeitos adversos. A maior incidência de sintomas gripais no grupo VSUS comparado ao NV pode estar relacionado às características da população que costuma fazer a vacina contra influenza.

  8. Interações entre herbicidas e protetores para o controle de capim-annoni em pastagem natural Interactions among herbicides and safeners for the south african lovegrass control in natural grassland

    Directory of Open Access Journals (Sweden)

    Ives Clayton Gomes dos Reis Goulart

    2012-10-01

    Full Text Available A similaridade botânica do capim-annoni com as espécies forrageiras nativas ou cultivadas dificultam o seu controle em pastagens naturais. O objetivo deste trabalho foi avaliar o efeito de associações entre herbicidas e protetores sobre o controle de capim-annoni e a seletividade em pastagem natural. Foram realizados dois experimentos a campo em área de pastagem natural típica do Bioma Pampa avaliando-se herbicidas aplicados em pré e pós-emergência. Outro experimento foi conduzido em casa de vegetação com as espécies capim-annoni e grama forquilha onde foram avaliados os herbicidas glufosinate-ammonium e imazethapyr. Em ambos os experimentos os herbicidas foram avaliados isolados ou em associação com os protetores anidrido naftálico, dietholate e fluxofenim. Os experimentos a campo demonstraram que os herbicidas aplicados em pré ou pós-emergência em interação com os protetores não proporcionaram controle satisfatório do capim-annoni e nem aumento da seletividade à pastagem natural. Por outro lado, o experimento em condições controladas indicou a ocorrência de sinergismo do herbicida glufosinate-ammonium em interação com os protetores anidrido naftálico, dietholate e fluxofenim sobre o capim-annoni. As diferenças relacionadas a estádio de desenvolvimento e densidade de infestação estão relacionadas as variações das respostas nos estudos a campo e em condições controladas. A utilização de herbicidas em associações com protetores apresenta potencialidade de controle seletivo de capim-annoni quando aplicado em plantas em estádios iniciais de desenvolvimento.The botanical similarity of the invasive weed Eragrostis plana Nees (South African lovegrass difficult its selective control in natural pastures. The aim of this study was to evaluate the effect of the association between herbicides and safeners on the control of E. plana and on the selectivity to the natural pastures. Two experiments were conducted at

  9. Creche: ambiente expositor ou protetor nas infestações por parasitas intestinais em Aracaju, SE Children day care center: exposition or protection environment to intestinal parasites infestation in Aracaju, SE

    Directory of Open Access Journals (Sweden)

    Ricardo Queiroz Gurgel

    2005-05-01

    Full Text Available Para avaliar se creches são ambientes protetores ou propiciadores de infestação intestinal, foi feito exame coproparasitológico de crianças de creche e grupo controle. Creche relacionou-se à maior prevalência de parasitoses (63% x 41,4 % ; pThe work aimed to evaluate whether child daycare centers are an environment that protects against or exposes children to intestinal parasite infestation. Stool samples were analyzed from children attending such centers and a control group. It was concluded that attending daycare centers is related to intestinal parasitosis (630% vs. 41.4 %; p <0.01 and the risk of infestation is 1.5 times higher.

  10. Avaliação do conforto do protetor auditivo individual numa intervenção para prevenção de perdas auditivas The evaluation of comfort of the personal hearing protection devices as an intervention for hearing loss prevention

    Directory of Open Access Journals (Sweden)

    Patricia Schiniski Sviech

    2013-01-01

    Full Text Available OBJETIVO: analisar o conforto do protetor auditivo individual como parte de uma intervenção para prevenção de perdas auditivas em trabalhadores expostos a elevados níveis de ruído, por meio da utilização de um questionário de avaliação de conforto. MÉTODO: realizou-se análise dos documentos da empresa, investigação do ruído e uso de protetor auditivo individual anterior, seleção do protetor auditivo individual, atividades educativas, aplicação de questionário e realização audiometrias. A população foi composta de 20 trabalhadores expostos a ruído acima de 80 dB(A. Os trabalhadores utilizaram protetores tipo inserção e concha, cada um durante 15 dias e responderam ao questionário de avaliação do conforto em duas ocasiões. RESULTADOS: dentre os participantes 85% eram homens e 15% mulheres, idade média 35 anos. O Índice de Conforto do protetor tipo inserção foi 4,6 e concha 6,1, com tempo médio de utilização de 6 horas 40 minutos. Dentre as razões negativas ao uso do equipamento destacaram-se: interferência com a comunicação (20%, diminuição da audição (10% e não sentir necessidadede usar (10%. CONCLUSÃO: os protetores auriculares estudados tiveram seus escores cotados em níveis aceitáveis, sendo considerados ambos confortáveis. Contudo, existiu uma diferença significante no Índice de Conforto entre protetores de diferentes tipos (inserção e concha. Com isso, pôde-se concluir que, o protetor auditivo individual tipo concha foi considerado o mais confortável e melhor aceito pela população estudada.PURPOSE: to analyze the comfort of the individual hearing protectors as part of an intervention for prevention of hearing loss in workers exposed to high noise levels, using a questionnaire of comfort assessment. METHOD: company safety and health records were reviewed, noise measurements were performed, new HPDs were selected, the comfort of the devices was evaluated and audiometric tests were

  11. Proteção solar para crianças: estudo preliminar sobre conhecimentos e atitudes dos pais = Sun protection for children: preliminary study on the knowledge and attitudes of parents

    Directory of Open Access Journals (Sweden)

    Silva, Luana Rosa da

    2010-01-01

    Full Text Available Objetivo: Este estudo objetivou analisar os conhecimentos e atitudes dos pais quanto as práticas de proteção solar para crianças em Araxá-MG. Materiais e Métodos: Foi uma pesquisa de campo de caráter quanti-qualitativa e exploratória, realizada por meio de entrevista, no mês de agosto de 2010, com pais ou responsáveis por alunos da quarta série do ensino fundamental. Foi realizada uma estrevista semi-estruturada abrangendo medidas de fotoproteção, conhecimento dos perigos da exposição solar e também aspectos sociais como renda familiar e escolaridade. Resultados: O período do dia de maior exposição foi entre 10 e 16 horas com 65,5%. Quanto ao tempo de exposição solar diário, notou-se que de três a quatro horas por dia foi o tempo mais relatado (33,3%. Quanto ao uso frequente de outras formas de proteção solar como: chapéu, boné, camisetas apropriadas, óculos, 66,7% afirmaram não fazer uso. Quando abordados em relação ao uso de protetor solar, 50% dos participantes relataram que as crianças não fazem o uso de protetor solar nem quando expostas a sol intenso. Conclusão: Os hábitos, cuidados e práticas de exposição solar dos pais para com seus filhos não estão adequados e o conhecimento acerca do assunto câncer da pele é dito por eles insuficiente, embora tenham noções dos perigos da exposição solar exagerada

  12. Portal WEB 2.0. utilizando Framework Struts

    OpenAIRE

    Palacín Mateo, Manuel

    2007-01-01

    El propósito de este proyecto es la implementación de un portal interactivo de contactos utilizando las tecnologías J2EE mediante Struts y siguiendo la tendencia Web 2.0. Previo a esta implementación se ha hecho una valoración del mercado actual de los portales de contactos y se han evaluado los servicios que ofrecen para posteriormente añadirlos a la demostración tecnológica. Tras esto se ha explicado lo que es la tendencia Web 2.0. Finalmente se han evaluado las diferentes opciones o tec...

  13. Solar Indices - Solar Flares

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of indices related to solar activity contributed by a number of national and private solar observatories located worldwide. This...

  14. Solar Indices - Solar Ultraviolet

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of indices related to solar activity contributed by a number of national and private solar observatories located worldwide. This...

  15. Solar Indices - Solar Corona

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of indices related to solar activity contributed by a number of national and private solar observatories located worldwide. This...

  16. Solar Indices - Solar Irradiance

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of indices related to solar activity contributed by a number of national and private solar observatories located worldwide. This...

  17. Nuevo criterio de complejidad utilizando una medida de eficiencia

    OpenAIRE

    Munduate del Río, Arantza; Pérez Prados, Antonio; Cano Sevilla, Francisco J.

    1995-01-01

    Centrado en el campo de los árboles de decisión, este trabajo estudia la forma de selección de un árbol óptimo entre los posibles árbo1es obtenidos a partir del análisis de un conjunto de datos, utilizando para ello una cantidad criterio que combina linealmente dos medidas de la calidad de un árbol: el error de resustitución y la eficiencia. Analizando el efecto de un proceso de poda en la cantidad criterio se obtiene una sucesión finita de subárboles rnínimos óptimamente podados del árbol má...

  18. REFRIGERAÇÃO UTILIZANDO PASTILHAS DE EFEITO PELTIER

    Directory of Open Access Journals (Sweden)

    Antonio Luiz P. S. Campos

    2010-06-01

    Full Text Available Pastilhas de Peltier são dispositivos baseados no efeito Peltier e são aplicadas para produzir efeito refrigerador ou aquecedor. Este trabalho aborda conceitos envolvidos na fabricação e funcionamento desses dispositivos tais como: histórico do efeito Peltier e desenvolvimento de placas de efeito Peltier. É feito um estudo de eficiência da refrigeração de água utilizando uma placa de efeito Peltier existente no Campus Natal – Zona Norte. Para isso, é implementada uma estrutura de refrigeração de água e são feitas medições para determinar a eficiência de sistema. Por fim, são apresentadas conclusões sobre o estudo desenvolvido.

  19. Thermodynamic methodology for the design of solar dryers operated with flat solar collectors; Metodologia termodinamica para el diseno de secadores operados con calentadores solares planos

    Energy Technology Data Exchange (ETDEWEB)

    Torres Reyes, Ernestina; Navarrete Gonzalez, Jose L; Ibarra Salazar, Beatriz A; Picon Nunez, Martin [Instituto de Investigaciones Cientificas, Universidad de Guanajuato, Guanjuato, Guanajuato (Mexico)

    2000-07-01

    In this paper a thermal performance analysis of solar drying process at operating varying conditions is presented. It is described semi-empirical models to thermal characterization of an experimental device. A simulator of thermal performance for operating varying conditions was developed as a part of the procedure of thermal design of solar dryers. On the other hand, it is described a simplified method to design solar collectors based on the determination of minimum entropy generation during the thermal conversion of the solar device by using the thermal analysis procedure established and the method derived of the second law of the Thermodynamics are finally presented. [Spanish] En este trabajo se presenta el analisis termico del comportamiento del sistema -colector solar camara de secado-. Se describen los modelos semi-empiricos con los que se caracterizo termicamente un secador solar experimental del tipo indirecto. Se presenta tambien un procedimiento de diseno de equipo de secado que toma en cuenta las condiciones variables de operacion que presentan los dispositivos solares. Por otro lado se describe un procedimiento simplificado de diseno, basado en un analisis derivado de la segunda ley de la Termodinamica. Esta metodologia se fundamenta en la minima generacion de entropia durante la conversion termica de la energia solar, utilizando colectores solares planos. Finalmente se presentan los resultados del diseno preliminar de equipo de secado utilizando los dos procedimientos mencionados.

  20. Solar building

    OpenAIRE

    Zhang, Luxin

    2014-01-01

    In my thesis I describe the utilization of solar energy and solar energy with building integration. In introduction it is also mentioned how the solar building works, trying to make more people understand and accept the solar building. The thesis introduces different types of solar heat collectors. I compared the difference two operation modes of solar water heating system and created examples of solar water system selection. I also introduced other solar building applications. It is conv...

  1. Solar energy

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This chapter discusses the role solar energy may have in the energy future of the US. The topics discussed in the chapter include the solar resource, solar architecture including passive solar design and solar collectors, solar-thermal concentrating systems including parabolic troughs and dishes and central receivers, photovoltaic cells including photovoltaic systems for home use, and environmental, health and safety issues

  2. Solar Features - Solar Flares

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A solar flare is a short-lived sudden increase in the intensity of radiation emitted in the neighborhood of sunspots. For many years it was best monitored in the...

  3. Solar storms; Tormentas solares

    Energy Technology Data Exchange (ETDEWEB)

    Collaboration: Pereira Cuesta, S.; Pereira Pagan, B.

    2016-08-01

    Solar storms begin with an explosion, or solar flare, on the surface of the sun. The X-rays and extreme ultraviolet radiation from the flare reach the Earths orbit minutes later-travelling at light speed. The ionization of upper layers of our atmosphere could cause radio blackouts and satellite navigation errors (GPS). Soon after, a wave of energetic particles, electrons and protons accelerated by the explosion crosses the orbit of the Earth, and can cause real and significant damage. (Author)

  4. Efeito protetor após sessões de exercício excêntrico: comparação entre membros superiores e inferiores The repeated bout effect: a comparison between upper and lower limbs

    Directory of Open Access Journals (Sweden)

    Leonardo Coelho Rabello de Lima

    2011-12-01

    Full Text Available O objetivo foi comparar a magnitude do efeito protetor (EP contra o dano muscular (DM induzido por uma sessão de exercícios excêntricos (EEM entre os extensores do joelho e os flexores do cotovelo. Doze sujeitos do gênero masculino foram divididos em 2 grupos, braços (GB e pernas (GP, e realizaram 2 sessões de EEM. Foram coletados 3 marcadores de DM, sendo eles, pico de torque isométrico (PTI, creatina quinase (CK e percepção subjetiva de dor (PSD, antes, imediatamente após (com exceção da CK e 48 horas após cada sessão de EEM. Foi encontrada queda significante de PTI e aumento significante de CK e PSD tanto imediatamente e 48 horas após a primeira sessão de EEM para o GB. No GP houve aumento significante de CK 48 horas após os EEM e da PSD imediatamente após os EEM, decorrentes da primeira sessão. No GB, a segunda sessão apenas provocou queda de PTI imediatamente após os EEM, enquanto no GP houve aumento significante apenas na PSD imediatamente após a segunda sessão de EEM. Apenas a CK apresentou EP para ambos os grupos. Pudemos concluir que o EP foi maior para o GB em comparação com o GP. Esse fenômeno pode ter ocorrido em detrimento da existência de um EP prévio para o GP, uma vez que este membro realiza contrações excêntricas intensas com maior freqüência no dia-a-dia, quando comparados com os GB.The objective was to compare the magnitude of the repeated bout effect (RBE induced by an eccentric exercise session (EES between the knee extensors and elbow flexors. Twelve male subjects were divided into two groups, arms (AG and legs (LG, and executed two EES. We collected three markers of muscle damage, they were, isometric peak torque (IPT, creatine kinase (CK and subjective perception of pain (PSD before, immediately after (except CK and 48 hours after each EES. Significant decrease in PTI was found as well as significant increase in CK and PSD both immediately and 48 hours after the first EES for the AG. In

  5. Solar Energy.

    Science.gov (United States)

    Eaton, William W.

    Presented is the utilization of solar radiation as an energy resource principally for the production of electricity. Included are discussions of solar thermal conversion, photovoltic conversion, wind energy, and energy from ocean temperature differences. Future solar energy plans, the role of solar energy in plant and fossil fuel production, and…

  6. Solar energy

    Science.gov (United States)

    Rapp, D.

    1981-01-01

    The book opens with a review of the patterns of energy use and resources in the United States, and an exploration of the potential of solar energy to supply some of this energy in the future. This is followed by background material on solar geometry, solar intensities, flat plate collectors, and economics. Detailed attention is then given to a variety of solar units and systems, including domestic hot water systems, space heating systems, solar-assisted heat pumps, intermediate temperature collectors, space heating/cooling systems, concentrating collectors for high temperatures, storage systems, and solar total energy systems. Finally, rights to solar access are discussed.

  7. Solar Combisystems

    DEFF Research Database (Denmark)

    Thür, Alexander

    2006-01-01

    This note first introduces what is a solar combisystem, the structure how a solar combisystem is build up and what are criteria’s to evaluate a solar combisystem concept. Further on the main components of a solar combisystem, the main characteristics and possible advantages and disadvantages...... compared to each other are described. It is not the goal of this note to explain the technical details how to design all components of a solar combisystem. This is done during other lectures of the solar course and in other basic courses as well. This note tries to explain how a solar combisystem...

  8. Solar Systems

    Science.gov (United States)

    1979-01-01

    The solar collectors shown are elements of domestic solar hot water systems produced by Solar One Ltd., Virginia Beach, Virginia. Design of these systems benefited from technical expertise provided Solar One by NASA's Langley Research Center. The company obtained a NASA technical support package describing the d e sign and operation of solar heating equipment in NASA's Tech House, a demonstration project in which aerospace and commercial building technology are combined in an energy- efficient home. Solar One received further assistance through personal contact with Langley solar experts. The company reports that the technical information provided by NASA influenced Solar One's panel design, its selection of a long-life panel coating which increases solar collection efficiency, and the method adopted for protecting solar collectors from freezing conditions.

  9. Solar radiophysics

    International Nuclear Information System (INIS)

    McLean, D.J.; Labrum, N.R.

    1985-01-01

    This book treats all aspects of solar radioastronomy at metre wavelengths, particularly work carried out on the Australian radioheliograph at Culgoora, with which most of the authors have been associated in one way or another. After an introductory section on historical aspects, the solar atmosphere, solar flares, and coronal radio emission, the book deals with instrumentation, theory, and details of observations and interpretations of the various aspects of metrewave solar radioastronomy, including burst types, solar storms, and the quiet sun. (U.K.)

  10. Propagación y crecimiento inicial del abarco (Cariniana pyriformis Miers, utilizando semillas silvestres

    Directory of Open Access Journals (Sweden)

    Harlenson Pinilla Cespedes

    2016-12-01

    Full Text Available Se realizó la propagación de la especie forestal Abarco Cariniana Pyriformis Miers, con el objetivo de analizar su comportamiento en vivero utilizando semillas botánicas no mejoradas. Se utilizó un diseño completamente aleatorio con arreglo factorial compuesto por 10 factores por condición lumínica -luz y sombra- y 45 unidades experimentales. Se utilizaron diferentes combinaciones de sustratos orgánicos. Las semillas fueron sometidas a un tratamiento pre-germinativo en presencia de un testigo. Las variables evaluadas fueron porcentaje de germinación, crecimiento en altura y diámetro y porcentaje de supervivencia. La especie comenzó la germinación 13 días después de la siembra y se extendió hasta el día 27. Los resultados del proceso de germinación fueron de 60 % y 40% a plena exposición solar y bajo malla poli-sombra, respectivamente. El crecimiento en altura de las plántulas muestra al factor CF con el mejor valor 28,94 cm, bajo condiciones de luz y el factor EF, con 25,56 cm a plena exposición de sombra. Mientras el incremento en diámetro los factores DF y EF registraron valores de 1,04 cm y 0,84 cm, bajo las condiciones sol y sombra respetivamente. Las semillas de esta especie son no-fotoblásticas, es decir que para su germinación es indiferente la presencia o ausencia de luz. Las plántulas ubicadas en la condición ambiental sol registraron mejores valores promedios en las variables diámetro y altura. Por tanto, esta condición ejerce efecto positivo para el crecimiento inicial de las plántulas de Abarco C. pyriformis. 

  11. Protector mechanisms of the association between gastroesophageal reflux disease and asthma: experimental study in rats Mecanismos protetores: doença do refluxo gastroesofágico e asma. Estudo experimental em ratos

    Directory of Open Access Journals (Sweden)

    Paula Yuri Sugishita Kanikadan

    2008-09-01

    éreas é uma das características que o indivíduo asmático desenvolve e diversos estudos associam o aumento da reatividade das vias aéreas com o refluxo gastroesofágico. OBJETIVO: Avaliar a reatividade à metacolina de traquéia exposta intraluminalmente ao suco gástrico de ratos submetidos a inflamação alérgica pulmonar. MÉTODOS: Grupos de ratos foram sensibilizados e broncoprovocados com ovoalbumina. Após 24 horas, os animais foram sacrificados e a traquéia removida para preenchimento de seu lúmen com suco gástrico obtido de um animal doador. A seguir, os segmentos foram colocados em placas plásticas com RPMI-1640 e mantidos em estufa por 3 horas em condições ambientais adequadas. Após o tempo de incubação, os fragmentos foram montados em cubas de vidro para órgão isolado para registro isométrico de contração, através da construção de curvas concentração-efeito à metacolina. RESULTADOS: Observou-se redução da resposta contrátil em traquéia exposta ao suco gástrico proveniente de ratos alérgicos. Os tratamentos farmacológicos com composto 48/80 e cromoglicato de sódio (bloqueio de mastócitos, L-NAME (inibidor de óxido nítrico, NO, capsaicina (depleção de neuropeptídios e indometacina (inibidor da ciclooxigenase corroboraram esta observação. CONCLUSÕES: Os resultados apontam para a existência de complexa interação entre a alergia pulmonar e o suco gástrico nas vias aéreas, com o envolvimento do sistema não-adrenérgico não-colinérgico, NO, prostanóides e mastócitos. À luz das evidências in vivo sobre a hiperreatividade das vias aéreas na associação asma e refluxo gastroesofágico, sugere-se que a reduzida resposta contrátil detectada in vitro pode representar um mecanismo protetor das vias aéreas. A despeito de sua presença, esta redução pode não ser observada in vivo devido à proeminência dos efeitos do sistema não-adrenérgico não-colinérgico excitatório.

  12. Diseño e implementación de un sitio web utilizando Drupal 7

    OpenAIRE

    PONS TUR, MARÍA JOSÉ

    2012-01-01

    En el presente proyecto se mostrará el diseño e implementación de un sitio web utilizando Drupal 7. El proyecto será una página web de un gimnasio llamado Nova Forme, con la finalidad de tener al alcance toda la información de todos los servicios de belleza ofrecidos por el gimnasio, informaciones de todas las actividades y horarios impartidas en el gimnasio, e información de las entradas del hammam entre otras. Pons Tur, MJ. (2012). Diseño e implementación de un sitio web utilizando Drupa...

  13. Solar energy

    International Nuclear Information System (INIS)

    Kruisheer, N.

    1992-01-01

    In five brief articles product information is given on solar energy applications with special attention to the Netherlands. After an introduction on solar energy availability in the Netherlands the developments in solar boiler techniques are dealt with. Solar water heaters have advantages for the environment, and government subsidies stimulate different uses of such water heaters. Also the developments of solar cells show good prospects, not only for developing countries, but also for the industrialized countries. In brief the developments in solar energy storage and the connection of solar equipment to the grid are discussed. Finally attention is paid to the applications of passive solar energy in the housing construction, the use of transparent thermal insulation and the developments of translucent materials. 18 figs., 18 ills

  14. Solar Imagery

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of solar photographic and illustrated datasets contributed by a number of national and private solar observatories located worldwide....

  15. Solar Features

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of solar feature datasets contributed by a number of national and private solar observatories located worldwide.

  16. Solar Indices

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of indices related to solar activity contributed by a number of national and private solar observatories located worldwide. This...

  17. Solar Special

    International Nuclear Information System (INIS)

    Van Roekel, A.; Osborne, J.; Schroeter, S.; De Jong, R.; De Saint Jacob, Y.

    2009-01-01

    Solar power is growing much faster than most policymakers and analysts realise. As costs come down and feed-in tariffs go up across Europe, a number of countries have started in pursuit of market leader Germany. But in Germany criticism is growing of the multi-billion-euro support schemes that keep the solar industry booming. In this section of the magazine several articles are dedicated to developments in solar energy in Europe. The first article is an overview story on the strong growing global market for solar cells, mainly thanks to subsidy schemes. The second article is on the position of foreign companies in the solar market in Italy. Article number three is dedicated to the conditions for solar technology companies to establish themselves in the German state of Saxony. Also the fifth article deals with the development of solar cells in Saxony: scientists, plant manufacturers and module producers in Saxony are working on new technologies that can be used to produce solar electricity cost-effectively. The goal is to bring the price down to match that of conventionally generated electricity within the next few years. The sixth article deals with the the solar power market in Belgium, which may be overheated or 'oversubsidized'. Article seven is on France, which used to be a pioneer in solar technology, but now produces only a fraction of the solar output of market leader Germany. However, new attractive feed-in-tariffs are changing the solar landscape drastically

  18. Solar Indices - Solar Radio Flux

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of indices related to solar activity contributed by a number of national and private solar observatories located worldwide. This...

  19. Coupled solar still, solar heater

    Energy Technology Data Exchange (ETDEWEB)

    Davison, R R; Harris, W B; Moor, D H; Delyannis, A; Delyannis, E [eds.

    1976-01-01

    Computer simulation of combinations of solar stills and solar heaters indicates the probable economic advantage of such an arrangement in many locations if the size of the heater is optimized relative to that of the still. Experience with various low cost solar heaters is discussed.

  20. Solar Sailing

    Science.gov (United States)

    Johnson, Les

    2009-01-01

    Solar sailing is a topic of growing technical and popular interest. Solar sail propulsion will make space exploration more affordable and offer access to destinations within (and beyond) the solar system that are currently beyond our technical reach. The lecture will describe solar sails, how they work, and what they will be used for in the exploration of space. It will include a discussion of current plans for solar sails and how advanced technology, such as nanotechnology, might enhance their performance. Much has been accomplished recently to make solar sail technology very close to becoming an engineering reality and it will soon be used by the world s space agencies in the exploration of the solar system and beyond. The first part of the lecture will summarize state-of-the-art space propulsion systems and technologies. Though these other technologies are the key to any deep space exploration by humans, robots, or both, solar-sail propulsion will make space exploration more affordable and offer access to distant and difficult destinations. The second part of the lecture will describe the fundamentals of space solar sail propulsion and will describe the near-, mid- and far-term missions that might use solar sails as a propulsion system. The third part of the lecture will describe solar sail technology and the construction of current and future sailcraft, including the work of both government and private space organizations.

  1. Fatores protetores e de risco para depresão da mulher após o aborto Factores protectores y de riesgo para la depresión de mujeres después del aborto Protection and risk factors for women's depression after abortion

    Directory of Open Access Journals (Sweden)

    Mariana Gondim Mariutti

    2010-04-01

    Full Text Available Objetivou-se identificar fatores de risco e proteção para depressão em decorrência do abortamento. Metodologia qualitativa com depoimentos de 13 mulheres. Os discursos foram analisados e possibilitaram a construção de duas categorias temáticas: fatores de risco e protetores. Os fatores de risco estão associados à precárias condições sócio-econômicas e afetivas; drogas; prostituição; falta de apoio social e familiar; violência. Nos fatores protetores observam-se presença de condições sócio-econômicas favoráveis à criação dos filhos; apoio familiar (especialmente do companheiro e social; profissão e trabalho. O reconhecimento desses aspectos abre caminhos para dar melhores cuidados às mulheres em abortamento.Estudio cualitativo que tuvo como objetivo identificar factores de riesgo y protección para depresión causada por el abortamiento. Declaraciones de 13 mujeres fueron analizadas y posibilitaron la construcción de dos categorías temáticas: factores de riesgo y protectores. Los factores de riesgo están asociados a las precarias condiciones socio-económicas y afectivas; drogas; prostitución; falta de apoyo social y familiar; violencia. En los factores protectores se observó la presencia de condiciones socio-económicas favorables a la creación de los hijos; apoyo social y familiar (especialmente del compañero; profesión y trabajo. El reconocimiento de esos aspectos abre caminos para dar mejor atención a las mujeres en abortamiento.This qualitative study aimed to identify risk and protection factors for depression caused by abortion; statements of 13 women were analyzed. Their reports were analyzed and enabled the construction of two thematic categories: risk and protection factors. The risk factors are associated to the precarious socio-economic and affective conditions; drugs; prostitution; lack of family and social support; violence. Socio-economic conditions favorable to raising children; social and

  2. Solar Photovoltaic

    OpenAIRE

    Wang, Chen; Lu, Yuefeng

    2016-01-01

    In the 21st century, human demand for new energy sources is urgent, because the traditional fossil energy is unable to meet human needs, and the fossil resource will make pollution, in this situation, solar energy gradually into the vision of scientists. As science advances, humans can already extensive use of solar energy to generate electricity. Solar energy is an inexhaustible and clean energy. In the global energy crisis, environmental pollution is the growing problem of today. The us...

  3. Solar magnetohydrodynamics

    International Nuclear Information System (INIS)

    Priest, E.R.

    1982-01-01

    The book serves several purposes. First set of chapters gives a concise general introduction to solar physics. In a second set the basic methods of magnetohydrodynamics are developed. A third set of chapters is an account of current theories for observed phenomena. The book is suitable for a course in solar physics and it also provides a comprehensive review of present magnetohydrodynamical models in solar physics. (SC)

  4. Solar constraints

    International Nuclear Information System (INIS)

    Provost, J.

    1984-01-01

    Accurate tests of the theory of stellar structure and evolution are available from the Sun's observations. The solar constraints are reviewed, with a special attention to the recent progress in observing global solar oscillations. Each constraint is sensitive to a given region of the Sun. The present solar models (standard, low Z, mixed) are discussed with respect to neutrino flux, low and high degree five-minute oscillations and low degree internal gravity modes. It appears that actually there do not exist solar models able to fully account for all the observed quantities. (Auth.)

  5. Solar Simulator

    Science.gov (United States)

    1981-01-01

    Oriel Corporation's simulators have a high pressure xenon lamp whose reflected light is processed by an optical system to produce a uniform solar beam. Because of many different types of applications, the simulators must be adjustable to replicate many different areas of the solar radiation spectrum. Simulators are laboratory tools for such purposes as testing and calibrating solar cells, or other solar energy systems, testing dyes, paints and pigments, pharmaceuticals and cosmetic preparations, plant and animal studies, food and agriculture studies and oceanographic research.

  6. Factores protectores de las familias para prevenir el consumo de drogas en un municipio de Colombia Fatores protetores das famílias para prevenir o consumo de drogas em um município da Colômbia Protective factors for preventing the use of drugs in the families of a Colombia locality

    Directory of Open Access Journals (Sweden)

    Núbia Medina Arias

    2010-06-01

    Full Text Available El objetivo de este estudio fue analizar los factores protectores de prevención del consumo de drogas, presentes en familias con niños que asisten a Hogares Comunitarios de Bienestar Familiar en un municipio colombiano. El estudio es de tipo descriptivo y cuantitativo transversal; la muestra estuvo constituida por 256 familias, seleccionadas por muestreo aleatorio simple. El instrumento para la recolección de datos fue un cuestionario aplicado durante los meses de marzo y abril de 2007, de forma autoaplicada. Se encontraron factores protectores como demostraciones de afecto con los hijos, jugar y hablar con ellos sobre lo que les gusta, comunicación fácil, toma de decisiones en pareja, adecuada flexibilidad durante la educación familiar, y existencia de normas. Por otro lado existen factores de riesgo como el consumo de drogas lícitas (cigarrillo y alcohol y bajo porcentaje de drogas ilícitas. Un alto porcentaje de familias considera que los padres, principalmente, deben tomar medidas de prevención en los primeros años de vida del niño. Los factores protectores encontrados deben ser reforzados, debido a que no son muy fuertes; también, se deben controlar los factores de riesgo encontrados para convertirlos en factores protectores.O objetivo deste estudo foi analisar os fatores protetores, visando prevenir o consumo de drogas, presente nas famílias de crianças atendidas nos Lares Comunitários do Bem-estar Familiar, em um município colombiano. Esta pesquisa é de cunho quantitativo descritivo transversal. A amostra foi constituída por 256 famílias selecionadas por amostra aleatória simples. O instrumento de coleta de dados foi um questionário usado no período de março a abril de 2007, de forma autoaplicavel. Foram encontrados fatores protetores como demonstrações de afeto com os filhos, brincar e falar com eles sobre o que eles gostam, a fácil comunicação, tomada de decisões pelo casal, adequada flexibilidade na cria

  7. Práticas de exposição e proteção solar de jovens universitários

    Directory of Open Access Journals (Sweden)

    Maristela Belletti Mutt Urasaki

    2016-02-01

    Full Text Available RESUMO Objetivo: conhecer práticas de exposição e proteção solar de jovens universitários. Método: estudo descritivo, transversal, realizado em uma universidade de São Paulo. Resultados: a amostra foi composta por 385 jovens e a coleta de dados realizada por meio de formulário. Do total, 239 (62% jovens classificaram-se como fototipo III e IV e 69 (17,9% afirmaram ter histórico de câncer de pele na família. A maioria afirmou exposição ao sol entre as 10 e 16 horas e por mais de uma hora de duração; 112 (29,1% informaram não empregar meios de proteção. Dentre os que utilizam protetor solar, a minoria o faz regularmente. Conclusão: embora a amostra tenha sido constituída por pessoas com maior acesso a informações, constatou-se exposição e proteção solar de modo impróprio. Ações educativas, individuais e coletivas devem ser fortalecidas e priorizadas tendo em vista a incidência de câncer de pele no país.

  8. MODELAGEM DE PROCESSOS UTILIZANDO O BPMN NA FACULDADE CATÓLICA RAINHA DO SERTÃO

    Directory of Open Access Journals (Sweden)

    Antonio Neuton da Silva Júnior

    2014-06-01

    Full Text Available O presente artigo apresenta o gerenciamento de negócios por processos, suas perspectivas atuais, suas vantagens, o desenvolvimento do projeto Modelagem de Processos utilizando BPMN implementado na Faculdade Católica Rainha do Sertão, as ferramentas utilizadas no projeto, a metodologia e os resultados obtidos a partir do mesmo. Ainda foi descrito os setores utilizados, a modelagem resultante das pesquisas e entrevistas e as sugestões para as melhorias dos processos modelados.

  9. Solar cooking

    Science.gov (United States)

    Over two billion people face fuel wood shortages, causing tremendous personal and environmental stress. Over 4 million people die prematurely from indoor air pollution. Solar cooking can reduce fuel wood consumption and indoor air pollution. Solar cooking has been practiced and published since th...

  10. Solar Sprint

    Science.gov (United States)

    Tabor, Richard; Anderson, Stephen

    2007-01-01

    In the "Solar Sprint" activity, students design, test, and race a solar-powered car built with Legos. The use of ratios is incorporated to simulate the actual work of scientists and engineers. This method encourages fourth-grade students to think about multiple variables and stimulates their curiosity when an activity doesn't come out as…

  11. Solar thermal

    International Nuclear Information System (INIS)

    Jones, J.

    2006-01-01

    While wind power is widely acknowledged as the most developed of the 'new' renewables, the number two technology, in terms of installed capacity functioning worldwide, is solar heating, or solar thermal. The author has investigated recent industry reports on how these markets are developing. The authors of an International Energy Agency (IEA) survey studied 41 countries in depth at the end of 2004, revealing that 141 million m 3 - corresponding to an installed capacity of 98.4 GWth - were installed in the sample countries (these nations represent 3.74 billion people, about 57% of the world's population). The installed capacity within the areas studied represents approximately 85%-90% of the solar thermal market worldwide. The use of solar heating varies greatly between countries - even close neighbours - and between economic regions. Its uptake often has more to do with policy than solar resource. There is also different uptake of technology. In China, Europe and Japan, plants with flat-plate and evacuated tube collectors are used, mainly to heat water and for space heating. Unglazed plastic collectors, used mainly for swimming pool heating, meanwhile, dominate the North American markets. Though the majority of solar heating installations today are installed on domestic rooftops, the larger-scale installations should not be overlooked. One important part of the market is the hotel sector - in particular hotels in locations that serve the seasonal summer holiday market, where solar is extremely effective. Likewise hospitals and residential homes, multi-family apartment blocks and sports centres are all good examples of places where solar thermal can deliver results. There are also a growing number of industrial applications, where solar thermal can meet the hot water needs (and possibly more) of a range of industries, such as food processing and agriculture. The ability of solar to provide a heat source for cooling is expected to become increasingly important as

  12. Solar thermal

    Energy Technology Data Exchange (ETDEWEB)

    Jones, J.

    2006-07-15

    While wind power is widely acknowledged as the most developed of the 'new' renewables, the number two technology, in terms of installed capacity functioning worldwide, is solar heating, or solar thermal. The author has investigated recent industry reports on how these markets are developing. The authors of an International Energy Agency (IEA) survey studied 41 countries in depth at the end of 2004, revealing that 141 million m{sup 3} - corresponding to an installed capacity of 98.4 GWth - were installed in the sample countries (these nations represent 3.74 billion people, about 57% of the world's population). The installed capacity within the areas studied represents approximately 85%-90% of the solar thermal market worldwide. The use of solar heating varies greatly between countries - even close neighbours - and between economic regions. Its uptake often has more to do with policy than solar resource. There is also different uptake of technology. In China, Europe and Japan, plants with flat-plate and evacuated tube collectors are used, mainly to heat water and for space heating. Unglazed plastic collectors, used mainly for swimming pool heating, meanwhile, dominate the North American markets. Though the majority of solar heating installations today are installed on domestic rooftops, the larger-scale installations should not be overlooked. One important part of the market is the hotel sector - in particular hotels in locations that serve the seasonal summer holiday market, where solar is extremely effective. Likewise hospitals and residential homes, multi-family apartment blocks and sports centres are all good examples of places where solar thermal can deliver results. There are also a growing number of industrial applications, where solar thermal can meet the hot water needs (and possibly more) of a range of industries, such as food processing and agriculture. The ability of solar to provide a heat source for cooling is expected to become

  13. Solar energy: photovoltaics

    International Nuclear Information System (INIS)

    Goetzberger, A.; Voss, B.; Knobloch, J.

    1994-01-01

    This textbooks covers the following topics: foundations of photovoltaics, solar energy, P-N junctions, physics of solar cells, high-efficiency solar cells, technology of Si solar cells, other solar cells, photovoltaic applications. (orig.)

  14. Solar Newsletter | Solar Research | NREL

    Science.gov (United States)

    more about work by this consortium, which crosses national laboratories, on new materials and designs information on NREL's research and development of solar technologies. To receive new issues by email prize, focused on solar energy technologies, and will release the prize rules and open registration

  15. Solar electricity and solar fuels

    Science.gov (United States)

    Spiers, David J.

    1989-04-01

    The nature of solar radiation and its variation with location is described. The distribution of energy in the solar spectrum places immediate limits on the theoretical efficiency of conversion processes, since practical absorbers cannot convert all wavelengths received to useful energy. The principles of solar energy conversion methods are described. Absorption of solar energy can give rise to direct electrical generation, heating, or chemical change. Electrical generation from sunlight can be achieved by photovoltaic systems directly or by thermal systems which use solar heat to drive a heat engine and generator. The technology used and under research for promising ways of producing electricity or fuel from solar energy is described. Photovoltaic technology is established today for remote area, small power applications, and photovoltaic module sales alone are over 100 million dollars per year at present. The photovoltaic market has grown steadily since the mid-1970's, as prices have fallen continuously. Future energy options are briefly described. The merits of a sustainable energy economy, based on renewable energy resources, including solar energy, are emphasized, as this seems to provide the only hope of eliminating the problems caused by the build-up of atmospheric carbon dioxide, acid rain pollution and nuclear waste disposal. There is no doubt that clean fuels which were derived from solar energy and either did not involve carbon dioxide and used atmospheric carbon dioxide as the source dioxide as the source of carbon would be a worthy ideal. Methods described could one day achieve this.

  16. Solar magnetohydrodynamics

    International Nuclear Information System (INIS)

    Priest, E.R.

    1982-01-01

    Solar MHD is an important tool for understanding many solar phenomena. It also plays a crucial role in explaining the behaviour of more general cosmical magnetic fields and plasmas, since the Sun provides a natural laboratory in which such behaviour may be studied. While terrestrial experiments are invaluable in demonstrating general plasma properties, conclusions from them cannot be applied uncritically to solar plasmas and have in the past given rise to misconceptions about solar magnetic field behaviour. Important differences between a laboratory plasma on Earth and the Sun include the nature of boundary conditions, the energy balance, the effect of gravity and the size of the magnetic Reynolds number (generally of order unity on the Earth and very much larger on the Sun). The overall structure of the book is as follows. It begins with two introductory chapters on solar observations and the MHD equations. Then the fundamentals of MHD are developed in chapters on magnetostatics, waves, shocks, and instabilities. Finally, the theory is applied to the solar phenomena of atmospheric heating, sunspots, dynamos, flares, prominences, and the solar wind. (Auth.)

  17. Solar collectors

    Energy Technology Data Exchange (ETDEWEB)

    Hullmann, H; Schmidt, B [Technische Univ. Hannover (Germany, F.R.). Inst. fuer Industrialisierung des Bauens

    1976-01-01

    The utilisation possibilities of solar energy for the energy supplying of buildings are becoming increasingly more significant. Solar research at the moment aims predominantly with a high level of efficiency and therefore making accessible a significant range of applications for solar technology. Parallel to this are attempts to effect the saving of energy, be it in the demand for energy-saving constructions or in the increasing development and application of rational energy utilisation by technologists. The most important point of these activities at the moment, is still technological methods.

  18. Solar neutrinos

    International Nuclear Information System (INIS)

    Schatzman, E.

    1983-01-01

    The solar energy is produced by a series of nuclear reactions taking place in the deep interior of the sun. Some of these reactions produce neutrinos which may be detected, the proper detection system being available. The results of the Davis experiment (with 37 Cl) are given, showing a deficiency in the solar neutrino flux. The relevant explanation is either a property of the neutrino or an important change in the physics of the solar models. The prospect of a new experiment (with 71 Ga) is important as it will decide which of the two explanations is correct [fr

  19. Concentrating Solar Power Projects - Planta Solar 20 | Concentrating Solar

    Science.gov (United States)

    Power | NREL 20 This page provides information on Planta Solar 20, a concentrating solar power Solar's Planta Solar 20 (PS20) is a 20-megawatt power tower plant being constructed next to the PS10 tower and increasing incident solar radiation capture will increase net electrical power output by 10

  20. Aplicación electrónica para el ahorro de energía eléctrica utilizando una energía alternativa

    Directory of Open Access Journals (Sweden)

    Juan Carlos Cruz-Ardila

    2013-01-01

    Full Text Available El artículo presenta un trabajo orientado a disminuir el consumo de energía eléctrica entregada por la red eléctrica convencional, a través del aprovechamiento de la energía solar fotovoltaica. Se propone el diseño de un sistema de transferencia electrónica que facilita el uso de la energía eléctrica DC proveniente del panel solar, suprimiendo de esta manera, la utilización del inversor de voltaje, comúnmente usado en este tipo de aplicaciones y que eleva el costo de utilización de la energía solar. Se da a conocer inicialmente una revisión del estado del arte, que permite contextualizar el problema resuelto a partir de una energía renovable como la fotovoltaica, destacándose que actualmente España es el país con mayor desarrollo en este tema. Luego, se muestra el desarrollo secuencial del sistema de alimentación y la transferencia electrónica, haciendo una descripción de las variables identificadas y explicación, con el uso de diagramas de flujo, del sistema embebido implementado. También se da una descripción de los dispositivos usados tal como el sensor de corriente, la regulación y la rectificación. Se muestra el esquemático de la transferencia implementada. Finalmente, se revelan los resultados y las pruebas operacionales realizadas al sistema para demostrar la funcionalidad de la aplicación electrónica en el ahorro de la energía eléctrica utilizando una energía alternativa.

  1. Solar prominences

    CERN Document Server

    Engvold, Oddbjørn

    2015-01-01

    This volume presents the latest research results on solar prominences, including new developments on e.g. chirality, fine structure, magnetism, diagnostic tools and relevant solar plasma physics. In 1875 solar prominences, as seen out of the solar limb, were described by P.A. Secchi in his book Le Soleil as "gigantic pink or peach-flower coloured flames". The development of spectroscopy, coronagraphy and polarimetry brought tremendous observational advances in the twentieth century. The authors present and discuss exciting new challenges (resulting from observations made by space and ground-based telescopes in the 1990s and the first decade of the 21st century) concerning the diagnostics of prominences, their formation, their life time and their eruption along with their impact in the heliosphere (including the Earth). The book starts with a general introduction of the prominence “object” with some historical background on observations and instrumentation. In the next chapter, the various forms of promine...

  2. Solar chulha

    Energy Technology Data Exchange (ETDEWEB)

    Jadhao, P. H. [Department of Physics J.D. Institute of Engg. & Tech. Yavatmal (India); Patrikar, S. R. [Department of Physics VNIT, Nagpur (India)

    2016-05-06

    The main goal of the proposed system is to transfer energy from sun to the cooking load that is located in the kitchen. The energy is first collected by the solar collector lens system and two curve bars of same radius of curvature are mounted parallel and adjacent to each other at different height the solar collector is clamed on this two bars such that solar collector is exactly perpendicular to sunlight. The topology includes an additional feature which is window in the wall through which the beam is collimated is directed in the of kitchen. The solar energy that is collected is directed by the mirror system into the kitchen, where it is redirected to cooking platform located in the kitchen. The special feature in this system full Indian meal can be made since cooking platform is indoors.

  3. Solar Radio

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Scientists monitor the structure of the solar corona, the outer most regions of the Sun's atmosphere, using radio waves (100?s of MHz to 10?s of GHz). Variations in...

  4. Solar Energy

    Science.gov (United States)

    Building Design and Construction, 1977

    1977-01-01

    Describes 21 completed projects now using solar energy for heating, cooling, or electricity. Included are elementary schools in Atlanta and San Diego, a technical school in Detroit, and Trinity University in San Antonio, Texas. (MLF)

  5. Solar Pump

    Science.gov (United States)

    Pique, Charles

    1987-01-01

    Proposed pump moves liquid by action of bubbles formed by heat of sun. Tube of liquid having boiling point of 100 to 200 degrees F placed at focal axis of cylindrical reflector. Concentrated sunlight boils liquid at focus, and bubbles of vapor rise in tube, carrying liquid along with them. Pressure difference in hot tube sufficient to produce flow in large loop. Used with conventional flat solar heating panel in completely solar-powered heat-storage system.

  6. Hacia la predicción del Número R de Wolf de manchas solares utilizando Redes Neuronales con retardos temporales

    Science.gov (United States)

    Francile, C.; Luoni, M. L.

    We present a prediction of the time series of the Wolf number R of sunspots using "time lagged feed forward neural networks". We use two types of networks: the focused and distributed ones which were trained with the back propagation of errors algorithm and the temporal back propagation algorithm respectively. As inputs to neural networks we use the time series of the number R averaged annually and monthly with the method IR5. As data sets for training and test we choose certain intervals of the time series similar to other works, in order to compare the results. Finally we discuss the topology of the networks used, the number of delays used, the number of neurons per layer, the number of hidden layers and the results in the prediction of the series between one and six steps ahead. FULL TEXT IN SPANISH

  7. Solar Schematic

    Science.gov (United States)

    1979-01-01

    The home shown at right is specially designed to accommodate solar heating units; it has roof planes in four directions, allowing placement of solar collectors for best exposure to the sun. Plans (bottom) and complete working blueprints for the solar-heated house are being marketed by Home Building Plan Service, Portland, Oregon. The company also offers an inexpensive schematic (center) showing how a homeowner only moderately skilled in the use of tools can build his own solar energy system, applicable to new or existing structures. The schematic is based upon the design of a low-cost solar home heating system built and tested by NASA's Langley Research Center; used to supplement a warm-air heating system, it can save the homeowner about 40 percent of his annual heating bill for a modest investment in materials and components. Home Building Plan Service saved considerable research time by obtaining a NASA technical report which details the Langley work. The resulting schematic includes construction plans and simplified explanations of solar heat collection, collectors and other components, passive heat factors, domestic hot water supply and how to work with local heating engineers.

  8. Exposição e proteção solar dos estudantes de medicina de Curitiba (PR

    Directory of Open Access Journals (Sweden)

    Kátia Sheylla Malta Purim

    Full Text Available Trata-se de estudo observacional de corte transversal que teve como objetivo analisar a exposição e proteção solar de estudantes de Medicina de Curitiba (PR, através de questionário autoaplicado, comparando os resultados entre alunos de ambos os sexos que tiveram ou não intervenção da disciplina de Dermatologia. Análise estatística pelo Teste Exato de Fisher e Qui-Quadrado. Amostra composta de 398 estudantes com perfil sociodemográfico caracterizado principalmente por mulheres (54,9%, brancas, predominando a média de 23,8 anos. A maioria cursou a disciplina de Dermatologia (72,1% e possui conhecimentos básicos sobre fotoproteção (65,3%. Quanto às práticas de exposição solar, os horários preferidos foram após 16 horas (55% e entre 10-16 horas (23,3%, com uso diário de protetor solar (36,5% e fator de proteção 30 ou superior (65,5%. Em relação aos riscos individuais para carcinomas cutâneos, 61,2% se enquadraram nos fototipos II e III de Fitzpatrick. Histórico familiar de câncer de pele ocorreu em 24,6% nos avós e/ou pais. Entre as mulheres que cursaram a disciplina de Dermatologia, verificou-se aplicação diária de fotoprotetor mais vezes ao dia e com fator de proteção solar mais alto.

  9. Efeito de um protetor físico na semeadura direta de duas espécies florestais em área de domínio ciliar The effects of a shelter upon seeding of two forest tree species in a riparian area

    Directory of Open Access Journals (Sweden)

    Ubirajara Contro Malavasi

    2010-10-01

    Full Text Available O ensaio avaliou o uso de uma garrafa plástica tipo PET de 2.000 mL como protetor físico na semeadura direta de Enterolobium contortisiliquum (Vell. Morong. e Peltophorum dubium (Spreng. Taub. em área de domínio ciliar no Oeste do Paraná. Nas semeaduras executadas no outono, inverno e primavera, utilizaram-se quatro sementes pré-embebidas de cada espécie por cova. As avaliações constaram da percentagem acumulada de plântulas vivas por parcela 30 dias após a semeadura (emergência, da percentagem de plântulas vivas 90 dias após a semeadura (sobrevivência e da percentagem de covas por parcela (formada por 15 covas com pelo menos uma plântula viva 90 dias após a semeadura (densidade populacional, assim como da altura e diâmetro do colo das plântulas. A semeadura realizada no outono resultou em 45% de plântulas de timburi vivas 30 dias após a semeadura, enquanto a emergência de plântulas de canafistula (média de 75,5% foi indiferente às épocas de semeadura. O uso do protetor aumentou a emergência de plântulas das espécies estudadas quando semeadas no outono (12% ou no inverno (10%, assim como na sobrevivência da semeadura da primavera, e na densidade populacional nas semeaduras de outono e da primavera em covas semeadas com canafístula.The study compared the effects of a plastic bottle as a shelter on direct spot seeding of two forest species. Four water soaked seeds of Enterolobium contortisiliquum (Vell. Morong. (timburi or Peltophorum dubium (Spreng. Taub. (canafistula were spot seeded in autumn, winter or spring in a riparian area located on the western portion of Parana state, Brazil. Calculation of population variables included accumulative percentage of live germinants 30 days after seeding (emergency, percentage of live seedlings 90 days after seeding (survival, percentage of seeded spots per plot (formed by 15 seeding spots with at least one live seedling (population density, as well as seedling height and

  10. Solar India - 82: national solar energy convention

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    This document is the proceedings of the Solar India - 82 conference, which was held 17-19 December 1982. The papers are organized into functional groupings which include: (1) solar radiation, (2) flat plate solar collectors and solar water heaters, (3) solar concentrators, (4) solar air heaters and dryers, (5) solar ponds and energy storage, (6) solar cookers, (7) solar stills, (8) selective coatings, (9) photovoltaics, (10) space heating and cooling, (11) bio-energy, and (12) miscellaneous papers. The vast majority of the papers describe work carried out in India, the vast majority of the papers also contain relatively readable abstracts.

  11. Solar Features - Solar Flares - Patrol

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The H-alpha Flare Patrol identifies time periods each day when the sun is being continuously monitored by select ground-based solar observatories.

  12. Solar Features - Solar Flares - SIDS

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A Sudden Ionospheric Disturbance (SID) is any of several radio propagation anomalies due to ionospheric changes resulting from solar or geophysical events.

  13. Solar Energy Innovation Network | Solar Research | NREL

    Science.gov (United States)

    Energy Innovation Network Solar Energy Innovation Network The Solar Energy Innovation Network grid. Text version The Solar Energy Innovation Network is a collaborative research effort administered (DOE) Solar Energy Technologies Office to develop and demonstrate new ways for solar energy to improve

  14. Tratamiento del lactosuero utilizando la técnica de electrodiálisis

    OpenAIRE

    Ávila G., Rita M.; Medina, Ana Luisa; Cadenas A., Reinaldo A.

    2006-01-01

    Tratamiento del lactosuero utilizando la técnica de electrodiálisis (Ávila G., Rita M.; Cadenas A., Reinaldo A. y Medina, Ana Luisa) Resumen El lactosuero es un subproducto de la elaboración de quesos y mantequillas. Este subproducto contiene una cantidad importante de proteínas y calcio, entre otros componentes, que hacen atractivo su tratamiento con el objeto de adecuarlo para su comercialización directa o para elaborar bebidas lácteas. Los sueros ácidos y/o salados no son ap...

  15. Desarrollo de apio minimamente procesado fortificado con vitamina e, utilizando la ingenieria de matrices

    OpenAIRE

    MARTELO CASTAÑO, YISELL JOHAN; CORTES RODRIGUEZ, MISAEL; SUAREZ MAHECHA, HÉCTOR

    2011-01-01

    El objetivo de este trabajo fue desarrollar un producto minimamente procesado fortificado con vitamina E, a partir de apio (Apium graveolens L. var.dulce), utilizando la ingenieria de matrices como metodologia de obtencion de alimentos funcionales. Trozos de apio impregnados al vacio con dl¿¿tocoferol acetato emulsificado en una solucion isotonica al vegetal de NaCl, 1,2%, fueron evaluados en funcion del tiempo de almacenamiento y el envasado (con y sin vacio), en terminos de la cuantificacio...

  16. Polpação de palha de milho, utilizando-se diferentes processos organosolv

    OpenAIRE

    Maria Lucia Bianchi

    1995-01-01

    Resumo: A disponibilidade de palha de milho e a crescente procura de matérias primas alternativas que substituam a madeira na fabricação de papel, levaram à investigação da possibilidade de polpação da palha de milho, utilizando-se diferentes processos Organosolv. A palha de milho foi analisada, apresentando cerca de 13% de umidade, 1% de cinzas, 7% de extrativos, 24% de lignina Klason, 54% de celulose e 16% de polioses (por diferença), com um total de 71% de holocelulose. A análise elementar...

  17. MODELO DE BLOQUES PARA UN YACIMIENTO DE SULFUROS MASIVOS UTILIZANDO EL SOFTWARE MINESIGHT®

    OpenAIRE

    SEPÚLVEDA SEPÚLVEDA, GIOVANNI FRANCO; GALLO SIERRA, ADRIÁN FELIPE

    2011-01-01

    El objetivo de este trabajo es definir un modelo de bloques de un yacimiento hipotético de sulfuros masivos utilizando MineSight®, basado en la interpretación geológica, la viabilidad, planificación estratégica y la programación de los procesos a largo y corto plazo de las alternativas de producción y la capacidad requerida de la mina. Primero se presentan una descripción de los software minero más representativos del mercado en cuanto a la planeación minera, después se presentan las generali...

  18. Modelo de bloques para un yacimiento de sulfuros masivos utilizando el software minesight®

    OpenAIRE

    Franco Sepúlveda, Giovanni; Gallo Sierra, Adrián Felipe

    2012-01-01

    El objetivo de este trabajo es definir un modelo de bloques de un yacimiento hipotético de sulfuros masivos utilizandoMineSight®, basado en la interpretación geológica, la viabilidad, planificación estratégica y la programación de los procesosa largo y corto plazo de las alternativas de producción y la capacidad requerida de la mina.Primero se presentan una descripción de los software minero más representativos del mercado en cuanto a la planeación minera, después se presentan las generalidad...

  19. ESTIMACIÓN DE LA CARGA DE TRANSFORMADORES DE POTENCIA UTILIZANDO UNA RED NEURONAL ARTIFICIAL

    OpenAIRE

    Agudelo, Laura; Velilla, Esteban; López, Jesús M

    2014-01-01

    En este artículo se presenta una metodología para estimar la curva de carga de transformadores de potencia utilizando redes neuronales artificiales. Para implementar la metodología propuesta se utilizaron datos reales de dos transformadores ubicados en diferentes zonas geográficas y con diferentes condiciones de operación. La técnica de estimación de carga fue implementada con datos históricos de la empresa Interconexión Eléctrica S.A (ISA). Para realizar la predicción de las curvas de carga ...

  20. educARción: Desarrollo de Herramientas para el Aprendizaje Utilizando Realidad Aumentada

    OpenAIRE

    Guerrero Juk, Julián

    2013-01-01

    Se presenta un sistema para apoyar en la enseñanza de balanceo de ecuaciones químicas sencillas utilizando realidad aumentada (AR). El sistema combina elementos físicos con gráficos sintéticos para hacer tangible un proceso abstracto, y así permitir que el alumno experimente directamente el proceso de balanceo de ecuaciones, en contraste con métodos tradicionales que utilizan ecuaciones escritas en papel. Dado que el equipo que se propone para su implementación (visores, HMD) no es de uso com...

  1. Sugestões de práticas de ensino de geometria utilizando origami modular

    OpenAIRE

    Marília Pelinson Tridapalli

    2017-01-01

    O presente trabalho contém sugestões de práticas de ensino, utilizando o origami modular, que podem ser aplicadas nas aulas de geometria do Ensino Fundamental. As práticas foram desenvolvidas de maneira que o professor possa enriquecer suas aulas gastando pouco tempo no preparo, e apresentam objetos manipuláveis que tornam o processo de ensino-aprendizagem mais atrativo e significativo. Apresentamos todo o processo de elaboração dos módulos e seus respectivos encaixes para a construção, usand...

  2. Degradação de poliolefinas utilizando catalisadores zeolíticos

    OpenAIRE

    Valle,Maria Letícia M.; Guimarães,Maria José O. C.; Sampaio,Cristiane M. S.

    2004-01-01

    Neste trabalho foi estudada a degradação de alguns dos principais constituintes dos rejeitos plásticos (polietileno de alta densidade (HDPE), polietileno de baixa densidade (LDPE) e polipropileno (PP)), empregando-se um catalisador exausto de unidades de craqueamento de fluidos (FCC) e um catalisador zeolítico (ADZ3) sintetizado em laboratório. Utilizando técnicas de termogravimetria (TG-DTG) e cromatografia gasosa (CG), foi possível avaliar os produtos gerados no craqueamento destas poliolef...

  3. Sistemas microfluídicos amperométricos utilizando enzimas imobilizadas

    OpenAIRE

    Luís Marcos Cerdeira Ferreira

    2011-01-01

    Este trabalho descreve o desenvolvimento de um sistema microfluídico, contendo, como componente principal, um reator enzimático constituído de um microcanal fabricado em substrato de poli(metacrilato de metila) e um sistema amperométrico como detector. Para a construção de microcanais foi utilizando equipamento de usinagem a laser de CO2 para escavar os microcanais, que a seguir foram selados termicamente. A superfície interna desse microcanal foi submetida à modificação química com poli(etil...

  4. Produção de hidromel utilizando mel de Melipona scutellaris

    OpenAIRE

    Peixoto, Samira; Carvalho, Carlos Alfredo; Estevinho, Leticia M.

    2014-01-01

    Atualmente, existe uma crescente procura de bebidas fermentadas por parte dos consu-midores, particularmente de hidromel, produzido empiricamente desde a antiguidade. De acordo com a literatura, este bebida tem excelentes efeitos na digestão e metabolismo e é benéfico para doentes com anemia crónica e doenças do trato gastrointestinal [1].Esta bebida é geralmente produzida utilizando mel de Apis mellifera, no entanto, no Brasil existe também mel de abelhas sem ferrão, como Melipona scutellaris...

  5. Síntese enzimática de ascorbil oleato utilizando tecnologias alternativas

    OpenAIRE

    Balen, Manuela

    2016-01-01

    Tese (doutorado) - Universidade Federal de Santa Catarina, Centro Tecnológico, Programa de Pós-Graduação em Engenharia de Alimentos, Florianópolis, 2016. A produção enzimática de ascorbil oleato utilizando como substratos Lascórbico e ácido oleico necessita da total solubilização entre substratos a fim de se obter maiores rendimentos. Contudo, o ácido L-ascórbico e ácido oleico não são totalmente miscíveis por possuírem polaridades bastante distintas. Assim, este trabalho objetivou bus...

  6. Water disinfection with solar radiation; Desinfeccion del agua con radiacion solar

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Alejandra; Cortes, Juana E; Rodriguez, Miriam; Mundo, Alfredo; Vazquez, Sandra [Instituto Mexicano de Tecnologia del Agua, Jiutepec, Morelos (Mexico); Estrada, Claudio A [Centro de Investigacion en Energia, Temixco, Morelos (Mexico)

    2000-07-01

    Water disinfection by exposure to solar radiation is a low cost and easy application option to rural communities. The treatment of water can be done using plastic bags or plastic bottles of two litters setting on a reflective material. The efficient of the plastic bottles is lower than the one plastic bags, but the plastic bottles have a much better control of the treated water avoiding its recontamination. In order to increase the efficiency of disinfection using plastic bottles, two solar concentrators, using flat mirrors, were designed and built. Effluent water from a treatment plant of residual waters was used for the testing. Several comparison were carried out taking into account the position of the concentrators, the transparency of the bottles and the bags. The results show that using the concentrator that adjust its position to the sun every hour, a 100% disinfection is obtained in 4 hours of direct exposure to the sun rays in a sunny day. The period of time can be reduced up to 2 hours, if instead using transparent bottles, the bottles are black painted at their bottom half. With these results, the basis to design a cheap concentrator of easy construction to be used in rural communities have been settle. [Spanish] La desinfeccion del agua por exposicion a la luz solar fotodesinfeccion es una opcion de bajo costo y facil aplicacion para las comunidades rurales. El tratamiento puede llevarse a cabo utilizando bolsas o botellas de plastico transparente de dos litros de capacidad colocadas sobre un material reflejante. Las botellas son menos eficientes que las bolsas, pero permiten un mejor control del agua tratada evitando su recontaminacion. Para aumentar la eficiencia de la desinfeccion utilizando las botellas, se disenaron y construyeron dos concentradores solares de espejos planos que permitieron disminuir el tiempo de exposicion requerido cuando se utilizan estas. Para las pruebas de desinfeccion se utilizo agua del efluente de una planta de tratamiento

  7. Solar energy. [New Zealand

    Energy Technology Data Exchange (ETDEWEB)

    Benseman, R.

    1977-10-15

    The potential for solar space heating and solar water heating in New Zealand is discussed. Available solar energy in New Zealand is indicated, and the economics of solar space and water heating is considered. (WHK)

  8. Solarization soil

    International Nuclear Information System (INIS)

    Abou Ghraibe, W.

    1995-01-01

    Solar energy could be used in pest control, in soil sterilization technology. The technique consists of covering humid soils by plastic films steadily fixed to the soil. Timing must be in summer during 4-8 weeks, where soil temperature increases to degrees high enough to control pests or to produce biological and chemical changes. The technique could be applied on many pests soil, mainly fungi, bacteria, nematods, weeds and pest insects. The technique could be used in greenhouses as well as in plastic film covers or in orchards where plastic films present double benefits: soil sterilization and production of black mulch. Mechanism of soil solarization is explained. Results show that soil solarization can be used in pest control after fruit crops cultivation and could be a method for an integrated pest control. 9 refs

  9. Solar unit

    Energy Technology Data Exchange (ETDEWEB)

    Sukhanov, A M; Trushevskiy, S N; Tveryanovich, E V

    1982-01-01

    A solar unit is proposed which contains an inclined solar collector with supply and outlet pipelines, the first of which is connected to the source of a heat carrier, while the second is connected through the valve to the tank for collecting heated heat carrier equipped with a device for recovery. In order to improve the effectiveness of heating the heat carrier, it additionally contains a concentrator of solar radiation and a device for maintaining a level of the heat carrier in the collector in the zone of the focal spot of the concentrator, while the heat pipeline is connected to the source of the heat carrier with the help of a device for maintaining the level of the heat carrier.

  10. Control de velocidad de un motor de inducción utilizando un controlador Fuzzy

    Directory of Open Access Journals (Sweden)

    Madelín Lima Álvarez

    2011-03-01

    Full Text Available Se realiza la simulación del sistema de control de velocidad del motor de inducción. Se parte del enfoquevectorial y de un sistema de coordenadas adecuado a su futura utilización, utilizando para esto el lenguaje desimulación de sistemas dinámicos Simulink. En cuanto a la simulación del método de control vectorial porcampo orientado se ha empleado el denominado método de control vectorial indirecto. El control de la velocidaddel motor se simuló utilizando un controlador Fuzzy, comparándose posteriormente estos resultados con losobtenidos mediante la utilización de un controlador PI digital.  This work carries out the simulation of speed control of induction motor. It is based on the field orientation theoryand on a system of coordinates adapted to its future use. The language that has been used for the simulation ofdynamics systems is Simulink. The indirect method of the field orientation control theory was used in themathematical analysis of the induction motor. The speed control of the induction motor was simulated using aFuzzy controller and these results were compared with those obtained by means of the use of a PI digitalcontroller.

  11. Solar cells

    International Nuclear Information System (INIS)

    1980-01-01

    A method of producing solar cells is described which consists of producing a substantially monocrystalline tubular body of silicon or other suitable semiconductor material, treating this body to form an annular rectifying junction and then cutting it longitudinally to form a number of nearly flat ribbons from which the solar cells are fabricated. The P=N rectifying junction produced by the formation of silicon dioxide on the layers at the inner and outer surfaces of the body can be formed by ion-implantation or diffusion. (U.K.)

  12. Solar neutrinos

    International Nuclear Information System (INIS)

    Phillips, R.J.N.

    1987-09-01

    The problem with solar neutrinos is that there seem to be too few of them, at least near the top end of the spectrum, since the 37 Cl detector finds only about 35% of the standard predicted flux. Various kinds of explanation have been offered: (a) the standard solar model is wrong, (b) neutrinos decay, (c) neutrinos have magnetic moments, (d) neutrinos oscillate. The paper surveys developments in each of these areas, especially the possible enhancement of neutrino oscillations by matter effects and adiabatic level crossing. The prospects for further independent experiments are also discussed. (author)

  13. Concentrating Solar Power Projects - Nevada Solar One | Concentrating Solar

    Science.gov (United States)

    Power | NREL Nevada Solar One This page provides information on Nevada Solar One, a concentrating solar power (CSP) project, with data organized by background, participants, and power plant configuration. Acciona Energy's Nevada Solar One is the third largest CSP plant in the world and the first plant

  14. Concentrating Solar Power Projects - Khi Solar One | Concentrating Solar

    Science.gov (United States)

    Power | NREL Khi Solar One This page provides information on Khi Solar One, a concentrating solar power (CSP) project, with data organized by background, parcipants and power plant configuration . Status Date: February 8, 2016 Project Overview Project Name: Khi Solar One Country: South Africa Location

  15. Solar Energy and You.

    Science.gov (United States)

    Conservation and Renewable Energy Inquiry and Referral Service (DOE), Silver Spring, MD.

    This booklet provides an introduction to solar energy by discussing: (1) how a home is heated; (2) how solar energy can help in the heating process; (3) the characteristics of passive solar houses; (4) the characteristics of active solar houses; (5) how solar heat is stored; and (6) other uses of solar energy. Also provided are 10 questions to…

  16. Sistema Solar

    OpenAIRE

    Federación de Asociaciones de Astronomía Cielo de Comellas

    2011-01-01

    Lección sobre el Sistema Solar. Curso de Astronomía Básica, segunda edición, impartido por los miembros de la Federación de Asociaciones de Astronomía Cielo de Comellas. Casa de la Ciencia, sábados, del 24 de septiembre al 22 de octubre de 2011

  17. Solar Neutrinos

    Directory of Open Access Journals (Sweden)

    V. Antonelli

    2013-01-01

    relevant indications on the fundamental interactions among particles. After reviewing the striking results of the last two decades, which were determinant to solve the long standing solar neutrino puzzle and refine the Standard Solar Model, we focus our attention on the more recent results in this field and on the experiments presently running or planned for the near future. The main focus at the moment is to improve the knowledge of the mass and mixing pattern and especially to study in detail the lowest energy part of the spectrum, which represents most of the solar neutrino spectrum but is still a partially unexplored realm. We discuss this research project and the way in which present and future experiments could contribute to make the theoretical framework more complete and stable, understanding the origin of some “anomalies” that seem to emerge from the data and contributing to answer some present questions, like the exact mechanism of the vacuum to matter transition and the solution of the so-called solar metallicity problem.

  18. Solar satellites

    Energy Technology Data Exchange (ETDEWEB)

    Poher, C.

    1982-01-01

    A reference system design, projected costs, and the functional concepts of a satellite solar power system (SSPS) for converting sunlight falling on solar panels of a satellite in GEO to a multi-GW beam which could be received by a rectenna on earth are outlined. Electricity transmission by microwaves has been demonstrated, and a reference design system for supplying 5 GW dc to earth was devised. The system will use either monocrystalline Si or concentrator GaAs solar cells for energy collection in GEO. Development is still needed to improve the lifespan of the cells. Currently, the cell performance degrades 50 percent in efficiency after 7-8 yr in space. Each SSPS satellite would weigh either 34,000 tons (Si) or 51,000 tons (GaAs), thereby requiring the fabrication of a heavy lift launch vehicle or a single-stage-to-orbit transport in order to minimize launch costs. Costs for the solar panels have been estimated at $500/kW using the GaAs technology, with transport costs for materials to GEO being $40/kg.

  19. Solar Neutrinos

    Indian Academy of Sciences (India)

    7,81. The Chlorine experiment, located in the Homestake Gold Mine in Lead, South Dakota, was the first solar neutrino experiment to be set up. A tank of. 105 gallons of perchloroethylene in which the electron neu- trino reacts with chlorine to ...

  20. Solar satellites

    Science.gov (United States)

    Poher, C.

    A reference system design, projected costs, and the functional concepts of a satellite solar power system (SSPS) for converting sunlight falling on solar panels of a satellite in GEO to a multi-GW beam which could be received by a rectenna on earth are outlined. Electricity transmission by microwaves has been demonstrated, and a reference design system for supplying 5 GW dc to earth was devised. The system will use either monocrystalline Si or concentrator GaAs solar cells for energy collection in GEO. Development is still needed to improve the lifespan of the cells. Currently, the cell performance degrades 50 percent in efficiency after 7-8 yr in space. Each SSPS satellite would weigh either 34,000 tons (Si) or 51,000 tons (GaAs), thereby requiring the fabrication of a heavy lift launch vehicle or a single-stage-to-orbit transport in order to minimize launch costs. Costs for the solar panels have been estimated at $500/kW using the GaAs technology, with transport costs for materials to GEO being $40/kg.

  1. Detección de fraude bancario en tiempo real utilizando tecnologías de procesamiento distribuido

    OpenAIRE

    Mansilla Montero, Javier

    2016-01-01

    En este Trabajo de Fin de Máster se desarrollará un sistema de detección de fraude en pagos con tarjeta de crédito en tiempo real utilizando tecnologías de procesamiento distribuido. Concretamente se considerarán dos tecnologías: TIBCO, un conjunto de herramientas comerciales diseñadas para el procesamiento de eventos complejos, y Apache Spark, un sistema abierto para el procesamiento de datos en tiempo real. Además de implementar el sistema utilizando las dos tecnologías propuestas, un objet...

  2. Collecting Solar Energy. Solar Energy Education Project.

    Science.gov (United States)

    O'Brien, Alexander

    This solar energy learning module for use with junior high school students offers a list of activities, a pre-post test, job titles, basic solar energy vocabulary, and diagrams of solar energy collectors and installations. The purpose is to familiarize students with applications of solar energy and titles of jobs where this knowledge could be…

  3. Aproximaciones al valor de la integral definida utilizando una calculadora graficadora

    OpenAIRE

    Ansola, Esther; Rodríguez, Eugenio Carlos; Hernández, Nelson; Gómez, Pablo Ignacio; Alfonso, Débora Oliva; Sánchez, Danelia

    2008-01-01

    Este trabajo muestra una experiencia llevada a cabo con un grupo de estudiantes de primer año de ingeniería a través de un curso facultativo en el que se retomó el cálculo de integrales definidas, utilizando la tecnología, con el propósito de:• Consolidar el concepto de integral definida a través de su definición y de su interpretación geométrica. • Mostrar otras formas de calcular una integral definida mediante aproximaciones numéricas y su interpretación geométrica. El recurso tecnológic...

  4. Projeto de acopladores ópticos utilizando algoritmo genético

    OpenAIRE

    Jaqueline Oliveira Zampronio

    2016-01-01

    Resumo: Este projeto é uma proposta de um novo acoplador óptico para a aplicação em circuitos ópticos integrados. O dispositivo foi desenvolvido utilizando o método dos elementos finitos vetorial 3D associado com o algoritmo genético e leva em consideração guias de onda com diferentes altura, largura e índices de refração. O comprimento total do acoplador óptico é de apenas 4,22 µm e o seu funcionamento é baseado em pequenos segmentos cilíndricos que interferem na propagação da onda eletromag...

  5. Avaliação em MEV da fenda resultante da contração de polimerização da resina composta aplicada sobre diferentes materiais protetores pulpares = A sem evaluation of the gap resulting from the polymerization shrinkage of composite resins applied to different pulp protective materials

    Directory of Open Access Journals (Sweden)

    Unfer, Daniele Taís

    2006-01-01

    Full Text Available Introdução: A resina composta sofre contração como resultado da reação de polimerização que pode deslocar os materiais protetores pulpares, caso estes apresentem deficiente ou nenhuma adesão a dentina. Objetivo: avaliar o comportamento de dois materiais de proteção pulpar (CIV e CaOH2 cement em relação presença de fenda, quando submetidos a estresse de contração da resina composta e avaliar a fenda resultante da contração de polimerização entre dentina e resina composta. Metodologia: Foram confeccionados preparos classe V nas faces vestibular e lingual de 12 dentes molares humanos os quais foram divididos em quatro grupos de estudo, conforme a técnica restauradora e os materiais utilizados: G1 (SA + RC; G2 (HC + SA + RC; G3 (CIV + SA + RC e G4 (HC + CIV + SA + RC. Os corpos de prova foram avaliados em MEV e os dados obtidos foram submetidos análise não-paramétrica. Resultados: Os resultados obtidos mostram que os materiais de proteção pulpar utilizados são deslocados pela contração gerada pela polimerização da resina composta. Os melhores resultados (não presença de fenda foram demonstrados no grupo em que o sistema adesivo foi o único material entre a dentina e a resina composta. Quando do uso do CIV e do HC, associados ou não, foi encontrado o maior percentual de fendas. Conclusão: Os materiais de proteção pulpar continuarão a ser deslocados pela contração de polimerização das resinas compostas enquanto sua união à estrutura dental não apresentar suficiente resistência ou não se evitar a contração da resina composta

  6. Projeto e desenvolvimento de um carro robô controlado por smartphone, utilizando a plataforma Amarino

    Directory of Open Access Journals (Sweden)

    Otávio Souza Martins Gomes

    2015-01-01

    Full Text Available Este artigo mostra a construção de um carro robô controlado por dispositivos móveis utilizando o sistema operacional Android e uma placa de prototipagem open source (Arduino. Utilizou-se de motores para sua movimentação e sensores para interação com o ambiente. O envio de comandos foi realizado utilizando a tecnologia Bluetooth e é capaz de movimentar o carro robô em todas as direções de acordo com os comandos do usuário. Sensores instalados no carro coletam informações do ambiente que são enviadas ao dispositivo Android. A construção bem sucedida deste carro robô mostra que é possível implementar novas funcionalidades para esse produto, bem como apoiar outros projetos relacionados a esse tema.Palavras-chave: Arduino. Android. Bluetooth. Carro robô. Robótica. Project and development of a robot car controlled by smartphone, using the platform amarinoABSTRACTThis work shows the build of a robot car controlled by mobile devices employing Android operating system and an open source prototyping board (Arduino. Motors for its movements and sensors for its environment interaction were employed. The commands are transmitted using Bluetooth technology which can move the robot car in all directions according to the user commands. Sensors installed in the car collect the environment information which is sent to the Android device. The success build of this robot car shows that new features can be possible implemented as well as to support other projects related to this research area.Keywords: Arduino. Android. Bluetooth. Robot car. Robotic.

  7. Concentrated solar power generation using solar receivers

    Science.gov (United States)

    Anderson, Bruce N.; Treece, William Dean; Brown, Dan; Bennhold, Florian; Hilgert, Christoph

    2017-08-08

    Inventive concentrated solar power systems using solar receivers, and related devices and methods, are generally described. Low pressure solar receivers are provided that function to convert solar radiation energy to thermal energy of a working fluid, e.g., a working fluid of a power generation or thermal storage system. In some embodiments, low pressure solar receivers are provided herein that are useful in conjunction with gas turbine based power generation systems.

  8. Solar charge controller in solar street light

    OpenAIRE

    Dong, Haibo

    2014-01-01

    Recently, with the rapid development of scientific technology, the conventional energy cannot meet the requirement of human beings. People are looking for the utilization of renew energy. Solar en-ergy as a new clean energy has attract the eyes of people. The applications of solar energy are popular to human society. Solar street light is a good example. This thesis will focus on a deeper research of the popular and ubiquitous solar street light in China. However, solar charge controll...

  9. Solar Training Network and Solar Ready Vets

    Energy Technology Data Exchange (ETDEWEB)

    Dalstrom, Tenley Ann

    2016-09-14

    In 2016, the White House announced the Solar Ready Vets program, funded under DOE's SunShot initiative would be administered by The Solar Foundation to connect transitioning military personnel to solar training and employment as they separate from service. This presentation is geared to informing and recruiting employer partners for the Solar Ready Vets program, and the Solar Training Network. It describes the programs, and the benefits to employers that choose to connect to the programs.

  10. Factores protectores y de riesgo familiar relacionados al fenómeno de drogas, presentes en familias de adolescentes tempranos de Valparaíso, Chile Fatores protetores e de risco familiar, relacionados ao fenômeno de drogas, entre adolescentes tempranos de Valparaíso, Chile Protective and family risk factors related to drugs in families of adolescents from Valparaíso, Chile

    Directory of Open Access Journals (Sweden)

    Angélica Mosqueda-Díaz

    2011-06-01

    Full Text Available Esta investigación cuantitativa, descriptiva-transversal y exploratoria objetivó identificar y describir los factores protectores y de riesgo familiar frente al fenómeno de las drogas en familias de adolescentes tempranos de la comunidad de Valparaíso, Chile. La muestra tuvo 61 estudiantes registrados en 2008 que fueron seleccionados por muestreo aleatorio simple. El instrumento de recolección de datos fue un cuestionario elaborado y validado por expertos de 5 países de la región de las Américas. El 86,9% de los adolescentes percibieron las relaciones familiares, en general, como factor protector, con destaque para la alta comunicación con los padres. El acumulo de tensiones, problemas de salud y comportamiento fueron vistos como factores protectores por la mayoría, un número pequeño de estudiantes lo considera como factor neutro, en ambos casos asociados al consumo de alcohol y drogas por parte de algún miembro de la familia. También, la mayoría considera como factores de riesgo la educación y el tipo de trabajo de los padres.O objetivo deste estudo foi identificar e descrever os fatores protetores e de risco familiar frente ao fenômeno das drogas, em famílias de adolescentes tempranos da comunidade de Valparaiso, Chile. Trata-se de pesquisa quantitativa, descritiva transversal e exploratória. A amostra foi composta por 61 estudantes, matriculados em 2008, e selecionados por amostra aleatória simples. O instrumento de coleta de dados foi um questionário elaborado e validado por experts de 5 países das regiões das Américas. Dos adolescentes, 86,9% perceberam as relações familiares. em geral, como fator protetor, com destaque à alta comunicação com os pais. O acúmulo de tensões, problemas de saúde e comportamentais foram encontrados como fatores protetores entre número pequeno de estudantes que atuam como atores neutros, em ambos os casos associados ao consumo de álcool e drogas, por parte de algum membro da fam

  11. Solar club

    CERN Multimedia

    Solar club

    2013-01-01

    SOLAR CLUB Le  CERN-Solar-Club souhaite une  très bonne année 2013 à tous les Cernois et Cernoises, et remercie encore une fois  tous ceux et celles qui, fin octobre, par leur vote, nous ont permis de finir dans les 5 premiers du concours "Conforama Solidaire" et ainsi financer nôtre projet "énergie solaire et eau potable pour Kilela Balanda" en République Démocratique du Congo (voir : http://www.confo.ch/solidarite/?lang=fr). Nous vous annoncons également notre Assemblée Générale Annuelle jeudi 21 février à 18 h 00 Salle C, 1er étage, Bât. 61 Vous êtes les bienvenus si vous souhaitez en savoir un peu plus sur les énergies renouvelables.

  12. Fisica solare

    CERN Document Server

    Degl’Innocenti, Egidio Landi

    2008-01-01

    Il volume è un'introduzione alla Fisica Solare che si propone lo scopo di illustrare alla persona che intende avvicinarsi a questa disciplina (studenti, dottori di ricerca, ricercatori) i meccanismi fisici che stanno alla base della complessa fenomenologia osservata sulla stella a noi più vicina. Il volume non ha la pretesa di essere esauriente (basta pensare che la fisica solare spazia su un gran numero di discipline, quali la Fisica Nucleare, la Termodinamica, L'Elettrodinamica, la Fisica Atomica e Molecolare, la Spettoscopia in tutte le bande dello spettro elettromagnetico, la Magnetoidrodinamica, la Fisica del Plasma, lo sviluppo di nuova strumentazione, l'Ottica, ecc.). Piuttosto, sono stati scelti un numero di argomenti di rilevanza fondamentale nello studio presente del Sole (soprattutto nei riguardi delle osservazioni da terra con grandi telescopi) e su tali argomenti si è cercato di dare una panoramica generale, inclusiva dell'evoluzione storica, senza scendere in soverchi dettagli. Siccome la Fis...

  13. Solar reflector

    Energy Technology Data Exchange (ETDEWEB)

    Dvorak, J

    1983-01-15

    The reflector in the form of part of a cylindrical surface delimited by two envelopes is installed on a platform which can move on an inclined curvilinear path. The angle of inclination of the path depends on the latitude of the locality. The reflected rays are focused on the tubular absorber. One of the axes of the platform is linked to a brake controlled by a sensor for intensity of solar radiation. The sensor is a pipe filled with liquid with high value of the temperature expansion coefficient, for example alcohol. The pipe is insulated from one side and is accessible to the solar rays from the opposite. One end of the pipe is equipped with a bending end or piston. In order to expand the fluid in the sensor, the pipe acts on the brake, and the reflector is installed in a position corresponding to the maximum radiation intensity.

  14. Solar pulsations

    International Nuclear Information System (INIS)

    Zirker, J.B.

    1980-01-01

    Oscillations of the surface of the sun, with periods between 5 and 160 min, have been observed by several spectroscopic techniques, and preliminary interpretations have been offered. The 5-min oscillations are global, nonradial, acoustic standing waves in the subsurface zone. Internal differential rotation speeds have been deduced from the Doppler splitting of these waves. Oscillations with longer periods have been reported, but need confirmation. The longest periods offer a tool for investigating the solar interior

  15. Solar Chameleons

    CERN Document Server

    Brax, Philippe

    2010-01-01

    We analyse the creation of chameleons deep inside the sun and their subsequent conversion to photons near the magnetised surface of the sun. We find that the spectrum of the regenerated photons lies in the soft X-ray region, hence addressing the solar corona problem. Moreover, these back-converted photons originating from chameleons have an intrinsic difference with regenerated photons from axions: their relative polarisations are mutually orthogonal before Compton interacting with the surrounding plasma. Depending on the photon-chameleon coupling and working in the strong coupling regime of the chameleons to matter, we find that the induced photon flux, when regenerated resonantly with the surrounding plasma, coincides with the solar flux within the soft X-ray energy range. Moreover, using the soft X-ray solar flux as a prior, we find that with a strong enough photon-chameleon coupling the chameleons emitted by the sun could lead to a regenerated photon flux in the CAST pipes, which could be within the reach...

  16. Solar chameleons

    International Nuclear Information System (INIS)

    Brax, Philippe; Zioutas, Konstantin

    2010-01-01

    We analyze the creation of chameleons deep inside the Sun (R∼0.7R sun ) and their subsequent conversion to photons near the magnetized surface of the Sun. We find that the spectrum of the regenerated photons lies in the soft x-ray region, hence addressing the solar corona problem. Moreover, these back-converted photons originating from chameleons have an intrinsic difference with regenerated photons from axions: their relative polarizations are mutually orthogonal before Compton interacting with the surrounding plasma. Depending on the photon-chameleon coupling and working in the strong coupling regime of the chameleons to matter, we find that the induced photon flux, when regenerated resonantly with the surrounding plasma, coincides with the solar flux within the soft x-ray energy range. Moreover, using the soft x-ray solar flux as a prior, we find that with a strong enough photon-chameleon coupling, the chameleons emitted by the Sun could lead to a regenerated photon flux in the CAST magnetic pipes, which could be within the reach of CAST with upgraded detector performance. Then, axion helioscopes have thus the potential to detect and identify particle candidates for the ubiquitous dark energy in the Universe.

  17. Solar flares

    International Nuclear Information System (INIS)

    Kaastra, J.S.

    1985-01-01

    In this thesis an electrodynamic model for solar flares is developed. The main theoretical achievements underlying the present study are treated briefly and the observable flare parameters are described within the framework of the flare model of this thesis. The flare model predicts large induced electric fields. Therefore, acceleration processes of charged particles by direct electric fields are treated. The spectrum of the accelerated particles in strong electric fields is calculated, 3 with the electric field and the magnetic field perpendicular and in the vicinity of an X-type magnetic neutral line. An electromagnetic field configuration arises in the case of a solar flare. A rising current filament in a quiescent background bipolar magnetic field causes naturally an X-type magnetic field configuration below the filament with a strong induced electric field perpendicular to the ambient magnetic field. This field configuration drives particles and magnetic energy towards the neutral line, where a current sheet is generated. The global evolution of the fields in the flare is determined by force balance of the Lorentz forces on the filament and the force balance on the current sheet. The X-ray, optical and radio observations of a large solar flare on May 16, 1981 are analyzed. It is found that these data fit the model very well. (Auth.)

  18. Diseño de multiplicador de 64 bits utilizando la técnica de barrido superpuesto

    OpenAIRE

    Montalvo Ramírez, Luis

    1987-01-01

    Se presenta el desarrollo del novel algoritmo de multiplicación por barrido superpuesto de 3-bits, así como también los aspectos importantes del diseño de la arquitectura, redes lógicas y layout de un multiplicador de 64-bits utilizando como caso de estudio.

  19. La resolución de problemas geométricos en Matemática utilizando la computadora

    Directory of Open Access Journals (Sweden)

    Osmany Guzmán-Simón

    2017-11-01

    Full Text Available Se presenta un análisis donde se plantean los fundamentos psicopedagógicos que sustentan el desarrollo de habilidades en la resolución de problemas geométricos en la asignatura Matemática, utilizando la computadora.

  20. Solar cities

    International Nuclear Information System (INIS)

    Roaf, S.; Fuentes, M.; Gupta, R.

    2005-01-01

    Over the last decade, climate change has moved from being the concern of few to a widely recognized threat to humanity itself and the natural environment. The 1990s were the warmest decade on record, and ever-increasing atmospheric levels of greenhouse gases such as carbon dioxide (CO/sub 2/), could, if left unchecked lead to serious consequences globally, including increased risks of droughts, floods and storms, disruption to agriculture, rising sea levels and the spread of disease. The contribution of anthropogenic emissions of carbon dioxide has been recognized as the principal cause of the atmospheric changes that drive these climate trends. Globally, buildings are the largest source of indirect carbon emissions. In 2000, the UK Royal Commission on Environmental Pollution estimated that in order to stabilise carbon emissions at levels, which avoid catastrophic alterations in the climate, we would have to reduce emissions from the built environment by at least 60% by 2050 and 80% by 2100 relative to 1997 levels. Studies of the Oxford Ecohouse have demonstrated that it is not difficult to reduce carbon emissions from houses by 60% or more through energy efficiency measures, but it is only possible to reach the 90% level of reductions required by using renewable energy technologies. Solar energy technologies have been the most successfully applied of all renewable to date largely because they are the only systems that can be incorporated easily into the urban fabric. In addition, the short fossil fuel horizons that are predicted (c. 40 years left for oil and 65 years for gas) will drive the markets for solar technologies. For these reasons, the cities of the future will be powered by solar energy, to a greater or lesser extent, depending on the city form and location. In recognition of the need to move rapidly towards a renewable energy future, a group of international cities, including Oxford, have started the Solar City Network. In this paper we outline the

  1. Early solar physics

    CERN Document Server

    Meadows, A J

    1970-01-01

    Early Solar Physics reviews developments in solar physics, particularly the advent of solar spectroscopy and the discovery of relationships between the various layers of the solar atmosphere and between the different forms of solar activity. Topics covered include solar observations during 1843; chemical analysis of the solar atmosphere; the spectrum of a solar prominence; and the solar eclipse of December 12, 1871. Spectroscopic observations of the sun are also presented. This book is comprised of 30 chapters and begins with an overview of ideas about the sun in the mid-nineteenth century, fo

  2. Solar solution

    International Nuclear Information System (INIS)

    Shi Zhengrong

    2009-01-01

    China is facing enormous energy challenges. Everyone seems to know that we need to increase our energy supply by the equivalent of one power plant per week to support China's economic growth, which is allowing millions of people to enjoy better standards of living. Much less is known of the extent to which China has taken steps to mitigate the impact of that growing energy demand through incentives for greater efficiency and renewable energy. Policies include: Cutting energy intensity - 20 per cent between 2005 and 2010, saving five times as much CO 2 as the EU's goals. Cutting major pollutants by 10 per cent by 2010. Setting one of the world's most aggressive renewable energy standards: 15 per cent of national energy from renewables by 2020. Setting targets of 300 megawatts of installed solar by 2010, and 1.8 gigawatts by 2020, in the 2007 National Development and Reform Commission Renewable Energy Development Plan. Dedicating $180 billion for renewable energy by 2020. Imposing energy efficiency targets for the top 1,000 companies, a measure with greater carbon savings potential than most Western initiatives. Establishing building energy codes in all regions and extensive efficiency standards for appliances, which will be particularly important as China continues to grow. Targeting new buildings in major cities like Beijing, Shanghai and Chongqing, to achieve 65 per cent greater energy efficiency than local codes require. Closing thousands of older, smaller, dirtier power plants by 2010. China understands the economic development potential in clean energy technologies. Even the noted journalist Thomas Friedman has remarked that 'China is going green in a big way,' using domestic demand for cleaner energy to build low-cost, scalable green technologies. Suntech Power Holdings - now the world's largest solar photovoltaic (PV) module manufacturer, with operations around the globe - was just one of dozens of solar companies that realised the opportunity provided by

  3. Solar energy collector

    Science.gov (United States)

    Brin, Raymond L.; Pace, Thomas L.

    1978-01-01

    The invention relates to a solar energy collector comprising solar energy absorbing material within chamber having a transparent wall, solar energy being transmitted through the transparent wall, and efficiently absorbed by the absorbing material, for transfer to a heat transfer fluid. The solar energy absorbing material, of generally foraminous nature, absorbs and transmits the solar energy with improved efficiency.

  4. Solar Pumping : The Basics

    OpenAIRE

    World Bank Group

    2018-01-01

    Solar photovoltaic water pumping (SWP) uses energy from solar photovoltaic (PV) panels to power an electric water pump. The entire process, from sunlight to stored energy, is elegant and simple. Over last seven years, the technology and price of solar pumping have evolved dramatically and hence the opportunities it presents. Solar pumping is most competitive in regions with high solar inso...

  5. Solar constant values for estimating solar radiation

    International Nuclear Information System (INIS)

    Li, Huashan; Lian, Yongwang; Wang, Xianlong; Ma, Weibin; Zhao, Liang

    2011-01-01

    There are many solar constant values given and adopted by researchers, leading to confusion in estimating solar radiation. In this study, some solar constant values collected from literature for estimating solar radiation with the Angstroem-Prescott correlation are tested in China using the measured data between 1971 and 2000. According to the ranking method based on the t-statistic, a strategy to select the best solar constant value for estimating the monthly average daily global solar radiation with the Angstroem-Prescott correlation is proposed. -- Research highlights: → The effect of the solar constant on estimating solar radiation is investigated. → The investigation covers a diverse range of climate and geography in China. → A strategy to select the best solar constant for estimating radiation is proposed.

  6. Solar neutrino

    Energy Technology Data Exchange (ETDEWEB)

    Sugimoto, D [Tokyo Univ. (Japan). Coll. of General Education

    1975-01-01

    The measurement of solar neutrino was performed by using the reaction /sup 37/cl+..nu..sub(e)..-->../sup 37/Ar+e/sup -/ by Davis et al. The argon gas produced through the above mentioned reaction in a tank containing 610 ton of C/sub 2/Cl/sub 4/ was collected and measured. The rate of production of /sup 37/Ar was 0.13+-0.20/day, and the net production rate by the solar neutrino was 0.06+-0.20/day, being corrected for background. This value corresponds to 0.5+-1.0 SNU. Theoretical calculation with the model of spherically symmetric solar development gave an expected value of 5.6 SNU, which is in contradiction with the experimental value. Reason of this discrepancy was considered. The possibility of decay of neutrino to the other particles with weak interaction is very slight. Various models of the sun were investigated, but the results were still inconsistent with the experiment. The mixing of matters in the sun may cause the reduction of neutrino. If He gas comes to the center of the sun by mixing, the reaction, /sup 3/He+/sup 3/He, progresses excessively at the center, and it produces the expansion of the core of the sun. Then, the temperature drops and the neutrino is reduced. Various models which can explain the neutrino of less than ISNU have been presented. However, other theory says that the reduction of neutrino is not expected even if the mixing is considered. A problem concerning the mixing is whether the thermal instability which causes the mixing exists. (Kato, T.).

  7. Comparative study of series of solar radiation; Estudio comparativo de series de radiacion solar

    Energy Technology Data Exchange (ETDEWEB)

    Adaro, Agustin; Cesari, Daniela; Lema, Alba; Galimberti, Pablo; Barral, Jorge [Universidad Nacional de Rio Cuarto, (Argentina)

    2000-07-01

    la energia solar se debera contar con la mas adecuada informacion sobre los niveles de radiacion. Siendo esta fuente de energia dependiente de las fluctuaciones atmosfericas y meteorologicas, es que se requiere contar con la mas certera informacion respecto a la cantidad y variabilidad de la energia solar disponible. Un camino es el tratamiento estadistico de los datos ya disponibles, tanto de radiacion solar como de horas de sol. Este enfoque genera mucha expectativa por la mayor cantidad de informacion respecto a las horas de sol existente. Esta mayor informacion de horas de sol se debe a que las mediciones se realizan con instrumentos llamados heliografos con un nivel de complejidad y costo mucho menor que los instrumentos de medicion de radiacion. Entre los heliografos el mas utilizado es el de Campbell - Stokes, y es el que se a instalado en la mayoria de las estaciones meteorologicas de Argentina y el Mundo, por lo que la informacion de horas de sol es la que mas abunda. El presente trabajo tiene por objetivo encontrar una interrelacion entre las series medidas de horas de sol e irradiacion. El estudio se realiza utilizando modelos de series temporales y el modelo de Angstrom-Page. Se realiza ademas un estudio de la generacion de secuencias de radiacion utilizando el concepto de las Cadenas de Markov. Se analizan las series para Rio cuarto determinandose la funcion de transferencia entre ambas series, y se obtienen los valores de radiacion solar global para localidades de la misma region. Se encuentran los coeficientes de la Ecuacion de Anstrom-Page para Rio Cuarto. Se encuentra los valores medios mensuales por estos dos metodos y se comparan resultados.

  8. Modelamiento de la irradiancia y la temperatura ambiente utilizando funciones de probabilidad

    Directory of Open Access Journals (Sweden)

    Johann Alexander Hernández Mora

    2014-01-01

    Full Text Available In this work, we develop a statistical methodology to characterize solar radiation and ambient temperature from real measurements. These parameters determine the behavior of solar energy in a particular location and they are essential to establish the performance of different systems that use this type of energy, such as photovoltaic or solar-thermal systems. Since these ambient parameters have a random behavior and they cannot be controlled by human intervention over the earth's surface, a methodology to obtain a probability density distribution for twelve (12 hours a day (from 6:00 a. m to 6:00 p. m. was built so as to predict solar energy behavior. From these density functions, corresponding cumulative probability functions are calculated. In the cases where variables cannot be deterministically determined, a numerical-best polynomial representation is found. The cumulative probability functions obtained in this work can be used as a basis to constructing statically reliable predictions of performance for different solar energy-based systems. These systems may serve as a first energy resource by using stochastic methods like Montecarlo simulations. As an example, in this paper we take data from measurement campaigns conducted in Bogotá to explain the aforementioned methodology. Finally, expressions that characterize the corresponding radiation and ambient temperature for each hour (from a statistically reliable random number between 0 and 1 are shown.

  9. Solar Energy Systems

    Science.gov (United States)

    1984-01-01

    Calibrated in kilowatt hours per square meter, the solar counter produced by Dodge Products, Inc. provides a numerical count of the solar energy that has accumulated on a surface. Solar energy sensing, measuring and recording devices in corporate solar cell technology developed by Lewis Research Center. Customers for their various devices include architects, engineers and others engaged in construction and operation of solar energy facilities; manufacturers of solar systems or solar related products, such as glare reducing windows; and solar energy planners in federal and state government agencies.

  10. Mobile Solar Tracker Facility

    Data.gov (United States)

    Federal Laboratory Consortium — NIST's mobile solar tracking facility is used to characterize the electrical performance of photovoltaic panels. It incorporates meteorological instruments, a solar...

  11. Solar Club

    CERN Multimedia

    Solar Club

    2010-01-01

    Le CERN Solar-Club vous invite à la présentation de sa participation dans : The Cyprus Institute Solar Car Challenge du 18 au 20 juin à Chypre . en réponse à l’invitation dudit institut, dans le cadre de la demande de Chypre pour joindre le CERN . Le Club y participera avec son vénérable Photon rénové , et la Dyane E-Solaire d’un de ses membres, rénové aussi . Après la présentation, le forum est ouvert pour toutes vos questions et propositions diverses, également dans d’autres domaines des énergies renouvelables . C’est aussi l’occasion pour joindre le Club ! Où, et Quand ? Le Mercredi 7 Avril à 19 h 00, au 6ème étage du Bât. Principal, (60-6-015) à la suite de l’AG des membres du Club , à 18h00 dans...

  12. Avaliacao da Relacao entre a Doenca Hepatica Nao Gordurosa e CAD utilizando TCMF

    Directory of Open Access Journals (Sweden)

    Duran Efe

    2014-01-01

    Full Text Available Fundamento: Alguns fatores de risco para a aterosclerose são acompanhados pela doença hepática gordurosa não alcoólica (DHGNA. Desejamos usar a tomografia computadorizada multi-fatias (TCMF como a técnica para encontrar relação entre a DHGNA e a doença arterial coronariana (DAC. Objetivo: A relação entre a DHGNA e a DAC foi investigada através de TCMF. Métodos: Um total de 372 indivíduos com ou sem sintomas cardíacos, que foram submetidos à angiografia por TCMF, foram incluídos no estudo. Os pacientes foram divididos em dois grupos, de acordo com a presença da DHGNA. Os segmentos arteriais coronarianos foram avaliados visualmente via angiografia por TCMF. Com base no grau de estenose arterial coronariana, aqueles com placas ausentes ou mínimas foram considerados como normais, enquanto aqueles que apresentavam estenose de menos do que 50% e no mínimo uma placa foram considerados como portadores da doença arterial coronariana não obstrutiva (não-obsDAC. Os pacientes que apresentaram no mínimo uma placa e estenose arterial coronariana de 50% ou mais foram considerados como portadores de doença arterial coronariana obstrutiva (obsDAC. A DHGNA foi determinada de acordo com o protocolo de TCMF, utilizando a densidade hepática. Resultados: De acordo com a densidade hepática, o número de pacientes com doença hepática gordurosa não alcoólica (grupo 1 foi de 204 (149 homens, 54,8% e com fígado normal (grupos 2 foi de 168 (95 homens, 45.2%. Houve 50 (24,5% não-obsDAC e 57 (27,9% casos de obsDAC no Grupo 1, e 39 (23,2% não-obsDAC e 23 (13,7% casos de obsDAC no Grupo 2. Conclusões: O presente estudo utilizando TCMF demonstrou que a frequência da doença arterial coronariana em pacientes com NAFDL foi significativamente superior do que nos pacientes em NAFDL.

  13. Morteros acumuladores con parafinas microencapsuladas para el aprovechamiento de la energía solar en suelos radiantes

    OpenAIRE

    Zetola Vargas, Vicente Andrés

    2013-01-01

    Esta Tesis plantea la pregunta de si el uso de morteros con parafinas microencapsuladas combinado con colectores solares térmicos puede reducir el consumo de energías convencionales, en un sistema tradicional de suelo radiante. Se pretende contribuir al conocimiento acerca del efecto que produce en el edificio, el calor latente acumulado en suelos radiantes, utilizando morteros de cemento Portland con material de cambio de fase (PCM), en conjunto con la energía solar. Para cumplir con este pr...

  14. Solar Innovation Infographic | Solar Research | NREL

    Science.gov (United States)

    Innovation Infographic Solar Innovation Infographic Scientists have been working to harness power from the sun for about 200 years. Over the past 40 years, solar energy technologies have made research developments and industry milestones that helped shape our U.S. solar industry. Infographic Embed

  15. Midscale Commercial Solar Market | Solar Research | NREL

    Science.gov (United States)

    States To help prospective solar customers understand and use the policies of their state for midsized Customers, which equips prospective solar customers with the tools necessary to understand and use the solar corporate customers (Alabama Power's Renewable Procurement Program), and a company with approval to sell

  16. Solar neutrinos and nonradial solar oscillations

    International Nuclear Information System (INIS)

    Zatsepin, G.T.; Gavryuseva, E.A.; Kopysov, Yu.S.

    1980-01-01

    The problem of origin of surface solar oscillations is considered. It is assumed that generation of oscillations is performed by the solar nucleus. The necessary excitation condition for gravitational oscillations of the solar nucleus is a sharp decrease of the oscillation amplitude outside the nucleus, where the nuclear reaction rates are small and only radiation losses are considerable. It is shown that the specific singularities of gravitational wave propagation in solar entrails permit to attain a significant reduction of the oscillation amplitude. The solar entrails can serve as an effective trap for gravitational waves, if the substance of the solar nucleus is close to the state of convectional equilibrium. In order that the g 1 quadrupole mode of the solar nucleus has a period of 2h 40 min and sharply decreases in the solar mantle, it is enough that only the external part of the solar nucleus is close to the state of convectional equilibrium. Closeness of the solar nucleus to the state of convectional equilibrium is an argument in favour of its periodic mixing. Periodic mixing of the solar nucleus can serve as a cause of a low counting rate of solar neutrinos in R.Davis chlorous detector

  17. Solar energy an introduction

    CERN Document Server

    Mackay, Michael E

    2015-01-01

    Solar Energy presents an introduction to all aspects of solar energy, from photovoltaic devices to active and passive solar thermal energy conversion, giving both a detailed and broad perspective of the field. It is aimed at the beginner involved in solar energy or a related field, or for someone wanting to gain a broader perspective of solar energy technologies. A chapter considering solar radiation, basic principles applied to solar energy, semiconductor physics, and light absorption brings the reader on equal footing with the technology of either solar generated electrical current or useful heat. Details of how a solar cell works and then production of current from a photovoltaic device is discussed. Characterization of a solar cell is examined, allowing one the ability to interpret the current-voltage relation, followed by discussion of parameter extraction from this relation. This information can be used to understand what limits the performance of a given solar cell with the potential to optimize its pe...

  18. Monitoramento do processo de compressão de ibuprofeno utilizando controle estatístico

    Directory of Open Access Journals (Sweden)

    Sara Elis Bianchi

    2012-04-01

    Full Text Available O Controle Estatístico de Processo (CEP é uma ferramenta bastante utilizada para auxiliar no controle da qualidade de parâmetros físicos como peso médio, dureza e friabilidade. Através das cartas de controle é possível detectar desvios dos parâmetros do processo, reduzindo a quantidade de produtos fora da especificação e, consequentemente, os custos da produção. A avaliação de trinta lotes de ibuprofeno em uma indústria farmacêutica, utilizando controle estatístico de processo, permitiu o fornecimento de informações imprescindíveis para a investigação detalhada dos pontos críticos do processo, diagnosticando as possíveis não conformidades na etapa de compressão deste fármaco. Desta maneira, podem-se propor atividades de melhoria, através da identificação e eliminação das causas especiais de variação no processo, com a finalidade de produzir comprimidos com qualidade.

  19. Comparativo das propriedades do concreto autoadensável (CAA utilizando areia fina e cinza volante

    Directory of Open Access Journals (Sweden)

    B. F. Tutikian

    Full Text Available O objetivo deste artigo é contribuir para a tomada de decisão sobre a definição do uso de materiais finos responsáveis pela resistência à segregação do concreto auto-adensável (CAA. Neste estudo, amostras de CAA foram dosadas com cinza volante, um material pozolânico, e areia fina, que é um material não pozolânico, utilizando o método de dosagem proposto por Tutikian & Dal Molin (2007 [1]. Foi observado que a utilização de cinza volante aumentou a resistência à compressão, principalmente nas idades mais avançadas, assim como os valores de módulo de deformação e velocidade das ondas de ultrasom. Também diminuiu a penetração de íons cloretos, para os mesmos valores de resistência em comparação com os CAA com areia fina e o custo final dos CAA com cinza volante foi inferior. Foram apresentados tanto os diagramas de dosagem como os de desempenho.

  20. Modelaje geológico y de recursos del yacimiento Pastelillo utilizando el krigeaje de indicadores

    Directory of Open Access Journals (Sweden)

    José Q. Cuador-Gil

    2005-03-01

    Full Text Available En ocasiones la complejidad y variabilidad de un yacimiento mineral hace dificil establecer dominios geológicos homogéneos que puedan ser utilizados para aplicar control geológico a la estimación de los parámetros más relevantes. La imposibilidad de crear un modelo geológico con unidades bien definidas conduce a trabajar con poblaciones heterogéneas, lo cual degrada considerablemente la calidad de las estimaciones. Tal es el caso de Pastelillo, yacimiento de materia prima para cemento, en el que es difícil reproducir la geometría de los distintos tipos tecnológicos utilizando el método tradicional de correlación geológica. Las distintas litologías que conforman el yacimientos están completamente mezcladas tanto en el plano como en la vertical y estos frecuentes cambios faciales provocan una gran variabilidad litológica y tecnológica en el yacimiento. Teniendo en cuenta lo anterior se propone emplear un método de interpolación espacial que permita hacer estimaciones en presencia de poblaciones complejas. En el artículo se establece un modelo tecnológico y de recursos para el yacimiento Pastelillo a partir del empleo de una técnica de estimación de la geoestadística no lineal: el krigeaje de indicadores.

  1. Biossorção de azul de metileno utilizando resíduos agroindustriais

    Directory of Open Access Journals (Sweden)

    Andressa C. Honorato

    2015-07-01

    Full Text Available O presente trabalho avaliou a capacidade de adsorção do corante azul de metileno nos resíduos da palha de milho e da bainha do palmito pupunha in natura. A caracterização dos resíduos foi determinada utilizando-se a microscopia eletrônica de varredura e espectroscopia na região do infravermelho a qual indicou a presença de grupos carboxílicos, hidroxila e carbonila. O tempo necessário para que o sistema atingisse o equilíbrio para ambos os resíduos foi de 240 min, seguindo uma cinética descrita pelo modelo de pseudo-segunda ordem. A capacidade máxima de adsorção foi de 102,8 mg g-1 para o resíduo da palha de milho, seguindo o modelo de isoterma de Langmuir e 50,9 mg g-1 para o resíduo de palmito pupunha, sendo que o modelo que melhor se ajusta foi Freundlich. Desta forma, esses resíduos são promissores para a adsorção do corante azul de metileno em efluentes.

  2. DESARROLLO DE APIO MINIMAMENTE PROCESADO FORTIFICADO CON VITAMINA E, UTILIZANDO LA INGENIERIA DE MATRICES

    Directory of Open Access Journals (Sweden)

    YISELL JOHAN MARTELO CASTAÑO

    2011-01-01

    Full Text Available El objetivo de este trabajo fue desarrollar un producto minimamente procesado fortificado con vitamina E, a partir de apio (Apium graveolens L. var.dulce, utilizando la ingenieria de matrices como metodologia de obtencion de alimentos funcionales. Trozos de apio impregnados al vacio con dl¿¿tocoferol acetato emulsificado en una solucion isotonica al vegetal de NaCl, 1,2%, fueron evaluados en funcion del tiempo de almacenamiento y el envasado (con y sin vacio, en terminos de la cuantificacion de sus propiedades fisicoquimicas, color, textura, estabilidad de la vitamina E y caracteristicas sensoriales. Se formulo la emulsion con el objetivo de adicionar teoricamente un 73% del Valor Diario Recomendado (VDR vitamina E/100 g de apio fresco y su cuantificacion se realizo por HPLC. La respuesta a la impregnacion en la matriz fue de 12,10+-1,15%, lo cual permitio alcanzar un 112% VDR vitamina E/100g apio fresco, manteniendose este contenido durante el almacenamiento de 9 dias en ambos tipos de envasado. Los parametros fisicoquimicos del producto fueron afectados por la IV, el tiempo y el envasado, manteniendo su coloracion verdosa y presentando disminucion en la firmeza. La ingenieria de matrices constituye una metodologia efectiva para el desarrollo de apio minimamente procesado adicionado con vitamina E.

  3. UTILIZANDO O MÉTODO TODIM PARA AVALIAR AS MELHORES EMPRESAS PARA TRABALHAR

    Directory of Open Access Journals (Sweden)

    Renato Teixeira da Silva

    2011-06-01

    Full Text Available Este artigo expõe uma nova proposta de ordenação das 5 melhores empresas para trabalhar em termos de qualidade do ambiente de trabalho e qualidade na gestão de pessoas utilizando-se do método TODIM como suporte científico para tal. A ordenação inicial, proposta pela revista Você/SA Exame, utiliza como método classificador o índice de felicidade no trabalho, uma soma ponderada de índices resultantes da percepção dos funcionários, das práticas da empresa e da constatação feita por jornalistas em visitas às empresas. Este trabalho, que utiliza o método TODIM, considera esses itens como critérios de avaliação e realiza uma análise comparativa das alternativas. Ao final, é executada uma comparação entre as ordenações e uma análise de sensibilidade, analisando as especificidades de cada método de ordenação e a consistência de seus resultados.

  4. Cálculo del factor de efectividad utilizando colocación ortogonal sobre elementos finitos

    Directory of Open Access Journals (Sweden)

    Javier Fontalvo Alzate

    1999-09-01

    Full Text Available En el presente documento se resuelve el problema del cálculo del factor de efectividad para la transferencia de masa y calor con reacción química en un pellet catalítico utilizando una técnica adecuada especialmente para números de Thiele elevados en donde la solución se restringe a una pequeña zona muy cercana a la superficie. La técnica aprovecha la rapidez de convergencia de la colocación ortogonal y la facilidad de ubicación de elementos en zonas en donde se presentan grandes gradientes del método para las diferencias finitas. La eficiencia del método está basada en la utilización del método LV para la descomposición de matrices. Se muestran comparaciones con otros métodos numéricos de solución del problema.

  5. PROPUESTA INFORMÁTICA PARA SELECCIONAR PERSONAL POR COMPETENCIAS UTILIZANDO TÉCNICAS DE INTELIGENCIA ARTIFICIAL

    Directory of Open Access Journals (Sweden)

    Raúl Martínez Rodríguez

    2006-12-01

    Full Text Available

    La selección de personal por competencias es un tema muy reciente que esta cautivando a las empresas que quieren asegurarse de contar con el personal calificado y competente. Su objetivo es seleccionar al candidato más idóneo para desempeñar un cargo ocupacional específico, teniendo en cuenta su potencial y capacidad de adaptación; lo que precisa ser más coherentes y no simplistas en el tratamiento de la información que se posee. En el presente trabajo se presenta una propuesta informática para realizar esta selección utilizando técnicas de inteligencia artificial (IA, que pueden proporcionar una solución satisfactoria a un problema real de gestión de personal.

  6. MODELAGEM DE UM SISTEMA MULTIAGENTE DE APOIO À PBL UTILIZANDO A METODOLOGIA MAS-COMMONKADS+

    Directory of Open Access Journals (Sweden)

    Laysa Mabel de Oliveira Fontes

    2014-10-01

    Full Text Available A aprendizagem baseada em problema (Problem-Based Learning - PBL é um método no qual os estudantes aprendem através da resolução de um problema que, em geral, não possui uma solução trivial e uma única solução correta. A PBL destaca o trabalho em equipe como um dos principais requisitos para o sucesso do processo de aprendizagem, ou seja, a colaboração é essencial. No entanto, a implantação de um método de ensino com base na PBL não é uma tarefa trivial. Em Ambientes Virtuais de Aprendizagem (AVAs, a complexidade de implantação deste método é ainda maior, pois o facilitador nem sempre pode detectar possíveis problemas na colaboração, nem possui todas as informações necessárias para aplicar as técnicas de aprendizagem deste método. Desta forma, este artigo apresenta o processo de modelagem de um Sistema Multiagente (SMA de apoio à PBL. O SMA proposto foi modelado utilizando a metodologia MAS-CommonKADS+, que consiste em uma extensão da metodologia MAS-CommonKADS.

  7. Resección quirúrgica de mucocele utilizando relleno siliconado

    Directory of Open Access Journals (Sweden)

    Adel Martínez

    2014-01-01

    Full Text Available El mucocele es una lesión que afecta especialmente las glándulas salivales menores; se forma debido a la extravasación de saliva mucosa producto de un trauma por mordedura. Teniendo en cuenta el factor causal, el mucocele se puede clasificar como quiste de extravasación mucosa o quiste de retención mucosa. Afecta primordialmente el labio inferior y se manifiesta como un nódulo, translúcido y circunscrito con un contenido mucoso o muestra una elevación del color de la mucosa que la cubre. El tratamiento consiste en la resección quirúrgica de la lesión, que incluya las glándulas salivales menores afectadas. Se realizó la revisión de una caso clínico de paciente de 18 años de edad, que presenta mucocele profundo, el cual fue tratado con resección quirúrgica utilizando como relleno de la cavidad quística una silicona fluida, que permite mantener los reparos anatómicos y así poder realizar la remoción completa de la lesión y las glándulas afectadas.

  8. EDITORIAL Solar harvest Solar harvest

    Science.gov (United States)

    Demming, Anna

    2010-12-01

    The first observations of the photoelectric effect date back to the early 19th century from work by Alexandre Edmond Becquerel, Heinrich Hertz, Wilhelm Hallwachs and J J Thomson. The theory behind the phenomena was clarified in a seminal paper by Einstein in 1905 and became an archetypical feature of the wave-particle description of light. A different manifestation of quantised electron excitation, whereby electrons are not emitted but excited into the valence band of the material, is what we call the photoconductive effect. As well as providing an extension to theories in fundamental physics, the phenomenon has spawned a field with enormous ramifications in the energy industry through the development of solar cells. Among advances in photovoltaic technology has been the development of organic photovoltaic technology. These devices have many benefits over their inorganic counterparts, such as light-weight, flexible material properties, as well as versatile materials' synthesis and low-cost large-scale production—all highly advantageous for manufacturing. The first organic photovoltaic systems were reported over 50 years ago [1], but the potential of the field has escalated in recent years in terms of efficiency, largely through band offsetting. Since then, great progress has been made in studies for optimising the efficiency of organic solar cells, such as the work by researchers in Germany and the Netherlands, where investigations were made into the percentage composition and annealing effects on composites of poly(3-hexylthiophene) (P3HT) and the fullerene derivative [6,6]-phenyl-C61 butyric acid methyl ester (PCBM) [2]. Hybrid devices that aim to exploit the advantages of both inorganic and organic constituents have also proven promising. One example of this is the work reported by researchers in Tunisia and France on a systematic study for optimising the composition morphology of TiO2 nanoparticles in poly(N-vinylcarbazole) (PVK), which also led to insights

  9. Solar flares

    International Nuclear Information System (INIS)

    Zirin, H.

    1974-01-01

    A review of the knowledge about solar flares which has been obtained through observations from the earth and from space by various methods is presented. High-resolution cinematography is best carried out at H-alpha wavelengths to reveal the structure, time history, and location of flares. The classification flares in H alpha according to either physical or morphological criteria is discussed. The study of flare morphology, which shows where, when, and how flares occur, is important for evaluating theories of flares. Consideration is given to studies of flares by optical spectroscopy, radio emissions, and at X-ray and XUV wavelengths. Research has shown where and possibly why flares occur, but the physics of the instability involved, of the particle acceleration, and of the heating are still not understood. (IAA)

  10. Uma Abordagem de Monitoração de Tráfego de Rede utilizando Lógica Difusa

    OpenAIRE

    Silveira, Enio Rovere; Universidade Federal de Santa Catarina; Dantas, M. A.R.; Universidade Federal de Santa Catarina

    2005-01-01

    Neste artigo, apresentamos um trabalho de pesquisa de monitoração de tráfego de rede utilizando uma abordagem de lógica difusa. Nossa contribuição está focada na criação de um protótipo que pudesse ser avaliado em uma configuração real de produção de uma grande organização, utilizando-se de hardware e software existentes na empresa. Resultados experimentais obtidos através de estudos de casos reais no ambiente, indicam o sucesso da abordagem na melhoria da monitoração de tráfego da rede....

  11. Factores protectores frente al consumo de alcohol: concepción de maestros de nivel inicial Fatores protetores frente ao consumo de álcool: percepção de professores de educação básica Protection factors against alcohol consumption as perceived by basic education teachers

    Directory of Open Access Journals (Sweden)

    Juana Beatriz Sigampa

    2005-10-01

    Full Text Available Esta investigación busca comprender la concepción de maestros de nivel inicial sobre los factores protectores frente al consumo de alcohol, basándose en los modelos teóricos de Resiliencia y Promoción de la Salud. De enfoque metodológico cualitativo, exploratorio, aplica entrevistas semi-estructuradas y observación no estructurada a una muestra de 25 maestras. Del análisis de contenido de los datos surgen tres categorías temáticas: Significado de Alcohol/Alcoholismo - interpretado como sustancia nociva y situación problema socio-cultural -; La Escuela como Espacio de Protección Frente al Consumo de Alcohol; El Maestro como Agente de Protección. Se asocia protección con informar hasta cuidar. El maestro entiende su función desde orientador hasta consejero/protector, para la cual, mayoritariamente, no se siente preparado fundamentándose en déficits psicopedagógicos, cognocistivos, jurídico-legales y por propios prejuicios sobre alcoholismo. Los resultados confirman los presupuestos de la investigación relativos al maestro y contexto escolar.O objetivo desta pesquisa é entender a percepção de professores de educação básica sobre os fatores que protegem contra o consumo de álcool. Foi adotada uma metodologia qualitativa do tipo exploratório, com entrevistas semi-estruturadas e observação não-estruturada aplicadas a uma amostra de 25 professoras. A análise de conteúdo dos dados levantou três categorias temáticas: Significado de Álcool/Alcoolismo; A Escola como Espaço de Proteção contra o Consumo de Álcool; o Professor como Agente de Proteção. O primeiro é interpretado como uma substância nociva e uma situação problema sócio-cultural. A proteção é associada com informar, comunicar, educar, ou cuidar. Portanto, o professor compreende sua função como cobrindo desde orientador até conselheiro ou protetor. A maioria não se sente preparada para desempenhá-la, fundamentando-se em déficits psicopedag

  12. Programa para fortalecer factores protectores que limitan el consumo de tabaco y alcohol en estudiantes de educación media Programa para fortalecer fatores protetores que limitam o consumo de tabaco e álcool entre estudantes de educação média Protective factor promotion program with a view to limiting tobacco and alcohol consumption among secundary students

    Directory of Open Access Journals (Sweden)

    Santiaga Enriqueta Esparza Almanza

    2004-04-01

    Full Text Available Los programas dirigidos a adolescentes indican que las intervenciones más efectivas para prevenir el consumo de tabaco y alcohol incluyen entrenamiento en habilidades sociales. En el presente estudio se desarrolló una intervención educativa encaminada a fortalecer los factores protectores autoestima y asertividad, aplicando canales de prevención primaria. El Modelo de Etapas Motivacionales de Componentes Múltiples y la Teoría del Aprendizaje Social brindan sustento teórico al presente estudio. Se realizaron dos mediciones, antes, y después de haber concluido la intervención. Resultados: se encontró un incremento de autoestima de Me=63.14 en la primer medición a Me=84.38 al finalizar la intervención. El nivel de asertividad se incrementó significativamente de Me=60.09 a 81.26 al finalizar la intervención en el grupo experimental (pOs programas dirigidos aos adolescentes indicam que as intervenções mais efetivas para prevenir o consumo de tabaco e álcool incluem treinamento das habilidades sociais. No presente estudo desenvolveu-se uma intervenção educativa destinada a fortalecer os fatores protetores, autoestima e assertividade, aplicando canais de prevenção primária. O Modelo de Etapas Motivacionais de Componentes Múltiplos e a Teoria do Aprendizado Social proporcionam sustento teórico no presente estudo. Foram realizadas mensurações antes e depois de ter concluído a intervenção. Resultados: encontrou um aumento de autoestima com Me = 63.1 na primeira mensuração Me=84.38 ao final da intervenção. No nível de assertividade se aperfeiçoou significativamente de Me=60 a 81.2 ao finalizar a intervenção no grupo experimental (pAdolescent-oriented programs indicate that the most effective interventions to prevent tobacco and alcohol consumption include social ability training. This article reports on an educational intervention aimed at strengthening protective factors, self-esteem and assertiveness, applying primary

  13. Factores protectores sobre el consumo de alcohol que promueven las maestras de pre-escolares Fatores protetores contra o consumo de álcool promovidos por professores de pré-escolares Protection factors against alcohol consumption promoted by pre-school teachers

    Directory of Open Access Journals (Sweden)

    Genoveva Elizabeth Avila

    2005-10-01

    Full Text Available El objetivo del estudio fue describir que factores protectores sobre el consumo de alcohol promueven las maestras de pre-escolares del departamento San Alberto, Córdoba, Argentina. El estudio es de tipo cuantitativo, descriptivo y se aplicó un instrumento auto-administrado a 43 maestras. Las variables estudiadas fueron sometidas a análisis estadístico descriptivo. Se logró conocer que el accionar de las maestras esta focalizado a los factores protectores de indole institucional y sociocultural de manera general e indirecta, ya que en un alto porcentaje las actividades desarrolladas se refieren a: fomento de habitos saludables, clima escolar, recreación, fortalecimiento e integración grupal, interacción y participación en las instituciones y sociedad entre las principales. Denotan la necesidad de replantearse acciones directas y concretas que implementen las maestras en relación a la problemática de alcohol en las escuelas de pre-escolares, para procurar un mayor impacto social.Este estudo teve como objetivo descrever os fatores de proteção contra o consumo de álcool que são promovidos por professores de pré-escolares do departamento San Alberto, Córdoba, Argentina. O estudo é do tipo quantitativo, descritivo. Foi aplicado um questionário auto-administrado a 43 professores. As variáveis estudadas foram submetidas à análise estatística descritiva. Observamos que as ações dos professores geral e indiretamente enfocam os fatores protetores do tipo institucional e sociocultural, já que uma grande porcentagem das atividades se referem principalmente a: Estímulo de hábitos saudáveis, clima escolar, recreação, fortalecimento e integração grupal, interação e participação nas instituições e na sociedade. Apontam a necessidade de reformular ações diretas e concretas implementadas pelos professores com relação ao problema do álcool nas escolas pré-escolares com vistas a um maior impacto social.This study aimed to

  14. Solar Energy Basics | NREL

    Science.gov (United States)

    Solar Energy Basics Solar Energy Basics Solar is the Latin word for sun-a powerful source of energy that can be used to heat, cool, and light our homes and businesses. That's because more energy from the technologies convert sunlight to usable energy for buildings. The most commonly used solar technologies for

  15. A solar neutrino loophole: standard solar models

    Energy Technology Data Exchange (ETDEWEB)

    Rouse, C A [General Atomic Co., San Diego, Calif. (USA)

    1975-11-01

    The salient aspects of the existence theorem for a unique solution to a system of linear of nonlinear first-order, ordinary differential equations are given and applied to the equilibrium stellar structure equations. It is shown that values of pressure, temperature, mass and luminosity are needed at one point - and for the sun, the logical point is the solar radius. It is concluded that since standard solar model calculations use split boundary conditions, a solar neutrino loophole still remains: solar model calculations that seek to satisfy the necessary condition for a unique solution to the solar structure equations suggest a solar interior quite different from that deduced in standard models. This, in turn, suggests a theory of formation and solar evolution significantly different from the standard theory.

  16. Solar engine system

    International Nuclear Information System (INIS)

    Tan, K.K.; Bahrom Sanugi; Chen, L.C.; Chong, K.K.; Jasmy Yunus; Kannan, K.S.; Lim, B.H.; Noriah Bidin; Omar Aliman; Sahar Salehan; Sheikh Ab Rezan Sheikh A H; Tam, C.M.; Chen, Y.T.

    2001-01-01

    This paper reports the revolutionary solar engine system in Universiti Teknologi Malaysia (UTM). The solar engine is a single cylinder stirling engine driven by solar thermal energy. A first prototype solar engine has been built and demonstrated. A new-concept non-imaging focusing heliostat and a recently invented optical receiver are used in the demonstration. Second generation of prototype solar engine is described briefly. In this paper, the solar engine system development is reported. Measurement for the first prototype engine speed, temperature and specifications are presented. The benefits and potential applications for the future solar engine system, especially for the electricity generating aspect are discussed. (Author)

  17. Photovoltaic solar concentrator

    Science.gov (United States)

    Nielson, Gregory N.; Cruz-Campa, Jose Luis; Okandan, Murat; Resnick, Paul J.; Sanchez, Carlos Anthony; Clews, Peggy J.; Gupta, Vipin P.

    2015-09-08

    A process including forming a photovoltaic solar cell on a substrate, the photovoltaic solar cell comprising an anchor positioned between the photovoltaic solar cell and the substrate to suspend the photovoltaic solar cell from the substrate. A surface of the photovoltaic solar cell opposite the substrate is attached to a receiving substrate. The receiving substrate may be bonded to the photovoltaic solar cell using an adhesive force or a metal connecting member. The photovoltaic solar cell is then detached from the substrate by lifting the receiving substrate having the photovoltaic solar cell attached thereto and severing the anchor connecting the photovoltaic solar cell to the substrate. Depending upon the type of receiving substrate used, the photovoltaic solar cell may be removed from the receiving substrate or remain on the receiving substrate for use in the final product.

  18. Solar workshops financial incentives

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-01-01

    Ten one-day workshops were held across the United States. Information in this workbook is compiled in conjunction with those workshops. The following discussions are included: solar as a fuel (history); why alternative fuels are being sought today; the need for conservation; advantages of solar energy; the potential of solar energy; why solar energy is not more widely used; a definition of solar; how solar can help meet energy demands; Federal policies and programs; what solar technologies exist today that can be effectively utilized (thermal applications, fuels from biomass, solar electric). Additional information is presented in three attachments: Energy-Conserving Methods; Domestic Policy Review of Solar Energy; and DOE Secretary's Annual Report to Congress-Solar Section. (MCW)

  19. PERFORMANCE EVALUATION OF SOLAR COLLECTORS USING A SOLAR SIMULATOR

    OpenAIRE

    M. Norhafana; Ahmad Faris Ismail; Z. A. A. Majid

    2015-01-01

    Solar water heating systems is one of the applications of solar energy. One of the components of a solar water heating system is a solar collector that consists of an absorber. The performance of the solar water heating system depends on the absorber in the solar collector. In countries with unsuitable weather conditions, the indoor testing of solar collectors with the use of a solar simulator is preferred. Thus, this study is conducted to use a multilayered absorber in the solar collector of...

  20. Solar collector array

    Science.gov (United States)

    Hall, John Champlin; Martins, Guy Lawrence

    2015-09-06

    A method and apparatus for efficient manufacture, assembly and production of solar energy. In one aspect, the apparatus may include a number of modular solar receiver assemblies that may be separately manufactured, assembled and individually inserted into a solar collector array housing shaped to receive a plurality of solar receivers. The housing may include optical elements for focusing light onto the individual receivers, and a circuit for electrically connecting the solar receivers.

  1. Solar heating and cooling.

    Science.gov (United States)

    Duffie, J A

    1976-01-01

    Solar energy is discussed as an energy resource that can be converted into useful energy forms to meet a variety of energy needs. The review briefly explains the nature of this energy resource, the kinds of applications that can be made useful, and the status of several systems to which it has been applied. More specifically, information on solar collectors, solar water heating, solar heating of buildings, solar cooling plus other applications, are included.

  2. Solar radiation in the Brazilian northeast

    Energy Technology Data Exchange (ETDEWEB)

    Tiba, Chigueru [Federal University of Pernambuco, Pernambuco (Brazil)

    2000-07-01

    which is the Northeast region. The relevant kriging estimate error maps were also obtained. The general objective of this paper is to improve the amount of the currently existing information on the solar radiation in the Northeast of Brazil. Regarding this, the contour maps of coefficients a and b have made possible estimating solar radiation in 82 additional locations, were only sunshine hours data were available. [Spanish] El incremento significativo en anos recientes del numero de sistemas de electrificacion rural (existen algunos cientos de ellos) utilizando la tecnologia fotovoltaica instalados en el noreste de Brasil (1,500,000 km{sup 2}, aproximadamente 42 millones de personas) utilizados para iluminacion o bombeo de agua, demanda una mejora en los procedimientos de disel de tal manera que se reduzca la carga del costo de capital por unidad de energia generada. Tal objetivo puede alcanzarse siempre y cuando se obtenga un mejor conocimiento acerca de recursos solares, considerando que muchas de estas aplicaciones dependen de ello. Las fuentes de informacion sobre radiacion solar en Brasil son muy variadas tanto a niveles institucionales como de publicaciones. Entre ellas se encuentran: La Meteorologia institucional (INMET), los departamentos de estado de agricultura, los institutos de investigacion, universidades y empresas de generacion de energia electrica y distribucion. Los informes en proceso o los articulos tecnicos y cientificos son las publicaciones principales donde esta informacion se puede encontrar. De esta manera, la calidad de los datos varia considerablemente, mostrando discontinuidades espaciales y temporales, sumado al hecho de que los instrumentos de medicion y las unidades fisicas de los datos registrados no estan estandarizados. Recientemente se publico en el Atlas de Brasil el cual contiene esta informacion, y esta agrupada, evaluada, calificada y presentada de un modo estandarizado. Es una de las mejores fuentes de informacion existentes

  3. Evaluación de ataques UDP Flood utilizando escenarios virtuales como plataforma experimental

    Directory of Open Access Journals (Sweden)

    Deyci Toscano

    2011-07-01

    Full Text Available Los ataques por denegación de servicio (DoS tienen como propósito imposibilitar el acceso a los servicios de una organización durante un periodo indefinido; por lo general, están dirigidos a los servidores de una empresa, para que no puedan ser accedidos por usuarios autorizados. El presente trabajo se enfoca en la evaluación de ataques DoS tipo UDP Flood, utilizando como plataforma de experimentación un entorno virtual de red que permite identificar cómo actúan dichos ataques en la saturación del ancho de banda; para llevarlo a cabo se diseñó e implementó una red híbrida con segmentación WAN, LAN y DMZ que inhabilita el acceso interno y externo a un servicio Web expuesto. Las herramientas evaluadas fueron UPD Unicorn, Longcat Flooder y UDPl.pl Script de Perl; las dos primeras instaladas sobre Windows, y la última, sobre Linux. Para validar está investigación se desarrolló un mecanismo de detección y mitigación de los ataques a nivel del firewall e IDS/IPS, evitando de este modo la saturación de la red. Finalmente, se evaluó el consumo dememoria, CPUy ancho de banda durante el ataque, la detección y la evasión, con el fin de determinar cuál genera mayor impacto. Los resultados demuestran que el mecanismo detecta, controla y mitiga los ataques.

  4. Evaluación de ataques UDP Flood utilizando escenarios virtuales como plataforma experimental

    Directory of Open Access Journals (Sweden)

    Walter Fuertes

    2012-05-01

    Full Text Available Los ataques por denegación de servicio (DoS tienen como propósito imposibilitar el acceso a los servicios de una organización durante un periodo indefinido; por lo general, están dirigidos a los servidores de una empresa, para que no puedan ser accedidos por usuarios autorizados. El presente trabajo se enfoca en la evaluación de ataques DoS tipo UDP Flood, utilizando como plataforma de experimentación un entorno virtual de red que permite identificar cómo actúan dichos ataques en la saturación del ancho de banda; para llevarlo a cabo se diseñó e implementó una red híbrida con segmentación WAN, LAN y DMZ que inhabilita el acceso interno y externo a un servicio Web expuesto. Las herramientas evaluadas fueron UPD Unicorn, Longcat Flooder y UDPl.pl Script de Perl; las dos primeras instaladas sobre Windows, y la última, sobre Linux. Para validar está investigación se desarrolló un mecanismo de detección y mitigación de los ataques a nivel del firewall e IDS/IPS, evitando de este modo la saturación de la red. Finalmente, se evaluó el consumo dememoria, CPUy ancho de banda durante el ataque, la detección y la evasión, con el fin de determinar cuál genera mayor impacto. Los resultados demuestran que el mecanismo detecta, controla y mitiga los ataques. 

  5. Acceso remoto seguro a cuentas de usuario utilizando plataformas de virtualización

    Directory of Open Access Journals (Sweden)

    Walter Fuertes, Maritza Enríquez y Diego Veloz

    2011-05-01

    Full Text Available En  las  universidades  persiste  el  problema  de  la subutilización de recursos tecnológicos; sin embargo, sesigue  incurriendo en gastos por adquisición de servidores,hardware  y  software. Frente  a  este  escenario,  en  laindustria se han venido desarrollando las tecnologías devirtualización, que ahorran energía y costos de inversiónde hardware. En  consecuencia,  el  artículo propone  elacceso remoto seguro a cuentas de usuario en un servidoruniversitario  virtualizado;  para  llevarlo  a  cabo  sediseñaron  e  implementaron  varias  topologías  deexperimentación, utilizando Virtual Box 3.1.3 y VMwareServer 2.0.2,  y  se  evaluaron diversas  tecnologías  deconexiones remotas seguras, bajo  idénticas condicionesy parámetros de  comprobación. En  cada  topología  seevaluó el rendimiento del servidor, el performance y  laseguridad  de  la  red  en  producción. Los  resultadosmuestran  la  funcionalidad  de  este  proyecto  deinvestigación  que  facilita  el  acceso  remoto  seguro deusuarios a los recursos informáticos universitarios.

  6. Productividad en una celda de manufactura flexible simulada en promodel utilizando path networks type crane

    Directory of Open Access Journals (Sweden)

    María Elena Bernal Loaiza

    2015-04-01

    Full Text Available Esta investigación se centra en el diseño de una simulación del proceso de una celda de manufactura flexible (FMC de la Facultad de Ingeniería Industrial de la Universidad Tecnológica de Pereira, con el propósito de medir y elegir aquella alternativa de solución que mejore en mayor grado la productividad del sistema actual utilizando los resultados que proporciona el software Promodel. Para realizar lo anterior se utilizaron etapas de la simulación como definición del sistema, formulación del modelo, identificación de variables, recolección de datos, implementación e interpretación.Como resultado, se calculó la productividad teniendo en cuenta las variables del modelo y tiempo de la simulación, al mismo tiempo se interpretó la información de cada una de las locaciones, hallando el porcentaje de utilización y total de entidades para las locaciones con capacidad unitaria; para las locaciones con mayor capacidad se encuentra información referente al porcentaje de tiempo vacío, parcialmente ocupado, lleno y no disponible respecto del tiempo disponible. A diferencia de otras simulaciones, en este diseño en la parte de redes se utilizó el tipo de red Crane, asociado a los recursos del modelo. El cual facilita el desplazamiento de los brazos robots con las piezas que circulan a través del sistema.

  7. Clasificador neuronal de fallos en rodamientos utilizando entradas basadas en transformadas wavelet packet y de Fourier

    Directory of Open Access Journals (Sweden)

    Víctor Gómez

    2013-01-01

    Full Text Available En este artículo se propone y se evalúa experimentalmente un método de diagnóstico de fallas en rodamientos utilizando la clasificación de patrones provenientes de las señales de las vibraciones mecánicas. El método utiliza pre-procesamientos con las transformadas de Fourier y wavelet packet para luego alimentar una red neuronal clasificadora que determina el tipo de fallo. Para evaluar las variables de entrada se realiza un análisis de varianza ANOVA comparando el efecto que tienen los factores: velocidad, carga, falla en pista externa y falla en elemento rodante sobre cada uno de los parámetros propuestos como entradas para las redes neuronales artificiales (RNA. Una vez seleccionadas las variables de entrada más adecuadas, se realiza la búsqueda del clasificador más apropiado explorando diversas configuraciones de red neuronal. Se han entrenado alrededor de 2000 RNA con el propósito de encontrar el clasificador más adecuado. Los resultados de validación muestran que para el algoritmo de entrenamiento tipo gradiente conjugado escalado (trainscg se alcanza un porcentaje de éxito en la clasificación del 88,5 %, mientras que para el algoritmo de entrenamiento de Levenberg-Marquardt (trainlm se logra un 91,8 %. Adicionalmente, se resalta que en 7 ocasiones se logró el 100 % de aciertos en la clasificación.

  8. CÓMO MEJORAR LA EFICIENCIA OPERATIVA UTILIZANDO EL TRABAJO EN EQUIPO

    Directory of Open Access Journals (Sweden)

    Carlos Alberto Franco

    2000-01-01

    Full Text Available En este artículo se presenta un modelo para aumentar la eficiencia operativa de diversas organizaciones de la economía con el fin de mejorar sus resultados financieros y por consiguiente su competitividad. Este modelo permite aprovechar los talentos de las personas que laboran en la empresa, organizándolos en equipos o grupos para que puedan identificar y aprovechar oportunidades de mejoramiento que conduzcan a un aumento significativo de la eficiencia productiva. La metodología que aquí se expone es particularmente útil para las empresas medianas y pequeñas que regularmente no cuentan con recursos ni infraestructura suficiente para introducir los cambios que CÓMO MEJORAR LA EFICIENCIA OPERATIVA UTILIZANDO EL TRABAJO EN EQUIPO CARLOS ALBERTO FRANCO Director MBA de la Universidad Icesi en convenio con la Universidad de Tulane. Ingeniero Eléctrico de la Universidad del Valle. Máster en Ingeniería de Carnegie Mellon University, Pisttsburg. Ph.D. en Ingeniería Eléctrica de USC (U.S.A. FRANCISCO VELÁSQUEZ V. Director del Programa de Administración de Empresas Plan Diurno. Ingeniero Electricista de la Universidad del Valle. Magister en Administración del Instituto de Estudios Superiores de Monterrey, Campus ciudad de México. mejoren su productividad. El modelo se puede aplicar directamente por los jefes o supervisores de cada una de las áreas de la empresa, sin necesidad de recurrir a asesorías costosas.

  9. EVALUACIÓN DE LA BIOESTIMULACION (NUTRIENTES EN SUELOS CONTAMINADOS CON HIDROCARBUROS UTILIZANDO RESPIROMETRIA

    Directory of Open Access Journals (Sweden)

    Erika garcia

    2011-01-01

    Full Text Available Se evaluó el proceso de bioestimulación por nutrientes: fertilizantes inorgánicos compuestos (FIC N:P:K 28:12:7 y sales inorgánicas simples (SIS NH4NO3 y K2HPO4 en suelos contaminados con hidrocarburos utilizando respirometría. El suelo fue contaminado con lodos aceitosos a una concentración ~40,000 mgTPH/kgps. Para cuantificar el consumo de oxigeno se utilizaron dos respirómetros de medición manométrica HACH® 2173b y OXITOP® PF600 durante ensayos de trece días. Se evaluaron dos tratamientos (FIC y SIS y tres controles (abiótico, sustrato de referencia y sin nutrientes. Se analizaron parámetros físico-químicos (pH, nutrientes y TPH y microbiológicos (heterótrofos y degradadores al inicio y al final de cada ensayo. SIS y el control sin nutrientes presentaron las mayores tasas de respiración, en el equipo HACH se obtuvieron valores de: 802.28 y 850.72 mgO2kgps-1d-1 respectivamente mientras que en el OXITOP fueron de 936.65 y 502.05 mgO2kgps-1d-1, respectivamente. En ninguno de los equipos se observo un aumento significativo de los degradadores, indicando que la bioestimulación no tuvo un efecto sobre la densidad microbiana. Por otro lado FIC, presentó los recuentos y tasas de respiración más bajas (188.18 y 139.87 mgO2kgps-1d-1 en HACH y OXITOP, respectivamente, esto pudo estar correlacionado a un efecto toxico generado por la acumulación de amoniaco.

  10. Clasificación del clutter marino utilizando redes neuronales artificiales

    Directory of Open Access Journals (Sweden)

    Argel Gonzalez Padilla

    2013-04-01

    Full Text Available La detección de radar bajo la acción del clutter marino es un problema actual. La efectividad de esta detección puede ser mejorada o aún optimizada si el comportamiento estadístico de los parámetros de las señales dispersadas por la superficie del mar (clutter marino es conocida. En el presente trabajo, la mayoría de los modelos estadísticos del clutter marino bajo diferentes condiciones es dada y se logra en un solo documento de manera sintética agrupar un gran volumen de información, difícil de encontrar, y en muchos casos, de interpretar. La mayor contribución investigativa de este trabajo es la presentación de los fundamentos de un sistema auto adaptativo  para la detección de blancos de radar, basado en el reconocimiento de diferentes distribuciones que modelan las mediciones de amplituddelclutter marino, obtenida en un intervalo de tiempo dado. Realizando una clasificación más fina al especificar el rango de valores que toman los parámetros de la distribución, para el intervalo de tiempo que se analiza. Este sistema fue simulado satisfactoriamente utilizando redes neuronales.Los resultados revelaron que se puede realizar de forma efectiva el reconocimiento de distribuciones de mediciones de amplitud del clutter marino y de los parámetros de la distribución.

  11. Solar Club

    CERN Multimedia

    Solar Club

    2012-01-01

      Le  CERN Solar Club tiendra son Assemblée Générale le Mercredi  4 avril, à 18h00 dans la salle C, bat.61, 1e étage de 18h00  à  19h30. Grande table ronde avec  présentations de projets concernant toute forme d’Energie  Renouvelable par des membres du club,  et… par  VOUS, nos invités. Au programme : - L’E-push : petite remorque électrique, qui pousse vôtre vélo par Robert Becker. - Le Stockage Saisonnier Sous-Lacustre d’Energie Solaire (S3LES) par  William van Sprolant. - Compte-Rendu de plusieurs conférences récentes concernant les E.R. par Jacques Dupin. - VOS  Projets ou Sujets (contactez : paul.gelissen@orange.fr). - Partie «administrative» avec rapport d’activités, rapport fina...

  12. Solar possibilities

    Energy Technology Data Exchange (ETDEWEB)

    Hayes, D

    1979-01-01

    A major energy transition of some kind is inevitable. For rich lands and poor alike, the energy patterns of the past are not prologue to the future. The oil-based societies of the industrial world cannot be sustained and cannot be replicated. The huge increases in oil prices since 1973 virtually guarantee that the Third World will never derive most of its energy from petroleum. Gross world oil production is likely to peak within the next decade; per capita world oil production may have already peaked. The world thus faces an awesome discontinuity in the production and use of energy. In the past, such energy transformations invariably produced far-reaching social change. The 18th-century substitution of coal for wood and wind in Europe, for example, accelerated and refashioned the industrial revolution. Later, the shift to petroleum altered the nature of travel, shrinking the planet and reshaping its cities. The coming energy transition can be counted upon to fundamentally alter tomorrow's world. This will be as true of a solar era as of a nuclear age. Sunlight is abundant, dependable, and free. With some minor fluctuations, the sun has been bestowing its bounty on the earth for more than four billion years, and it is expected to continue to do so for several billion more. The use of photovoltaic, wind power, biomass conversion, and hydro power for energy production are also discussed.

  13. Solar flares

    International Nuclear Information System (INIS)

    Brown, J.C.; Smith, D.F.

    1980-01-01

    The current observational and theoretical status of solar flares as a typical astrophysical problem is reviewed with especial reference to the intense and complex energy release in large flares. Observations and their diagnostic applications are discussed in three broad areas: thermal radiation at temperatures T 5 K; thermal radiation at T > approximately 10 5 K; and non-thermal radiation and particles. Particular emphasis is given to the most recent observational discoveries such as flare γ-rays, interplanetary Langmuir waves, and the ubiquitous association of soft x-ray loops with flares, and also the progress in particle diagnostics of hard x-ray and radio bursts. The theoretical problems of primary energy release are considered in terms of both possible magnetic configuration and in plasma instabilities and the question of achieving the necessary flash power discussed. The credibility of models for the secondary redistribution through the atmosphere of the primary magnetic energy released in terms of conduction, convection, radiation and particle transport is examined. Progress made in the flare problem in the past decade is assessed and some possible reasons why no convincing solution has yet been found are considered. 296 references. (U.K.)

  14. MODELAGEM E SIMULAÇÃO DA SECAGEM SOLAR DO PEDÚNCULO DE CAJU

    Directory of Open Access Journals (Sweden)

    Antônio Vitor Machado

    2012-10-01

    Full Text Available Os altos índices de poluição alcançados pelo uso de energia fosseis é bastante preocupante na atualidade, com isso a busca pela utilização de fontes de energia limpa e renovável é de grande interesse no presente. A secagem solar do pedúnculo de caju é uma alternativa viável para atender aos produtores, que com a utilização desta tecnologia poderão agregar valor aos seus produtos e minimizar suas perdas pós-colheita. Neste sentido este trabalho teve como objetivo o estudo da secagem solar do pedúnculo do caju utilizando um secador solar de radiação indireta. Foram realizados experimentos em uma unidade piloto de secador solar sob convecção forçada, utilizando fatias do pedúnculo de caju com espessuras de 1cm. Posteriormente, foi desenvolvido um modelo matemático fenomenológico para simular o secador solar e analisar o comportamento deste frente às variáveis pertinentes do processo. O modelo final é representado por um sistema de equações diferenciais parciais a duas fases (matriz sólida e fase gás e integrado numericamente pelo método das linhas. Os resultados obtidos com a simulação foram validados com os experimentos e, os mesmos mostraram-se condizentes com os dados de secagem solar do pedúnculo de caju

  15. Solar Design Workbook

    Energy Technology Data Exchange (ETDEWEB)

    Franta, G.; Baylin, F.; Crowther, R.; Dubin, F.; Grace, A., Griffith, J.W.; Holtz, M.; Kutscher, C.; Nordham, D.; Selkowitz, S.; Villecco, M.

    1981-06-01

    This Solar Design Workbook presents solar building design applications for commercial buildir^s. The book is divided into four sections. The first section describes the variety of solar applications in buildings including conservation aspects, solar fundamentals, passive systems, active systems, daylighting, and other solar options. Solar system design evaluation techniques including considerations for building energy requirements, passive systems, active systems, and economics are presented in Section II. The third section attempts to assist the designer in the building design process for energy conservation and solar applications including options and considerations for pre-design, design, and post-design phases. The information required for the solar design proee^ has not been fully developed at this time. Therefore, Section III is incomplete, but an overview of the considerations with some of the design proces elements is presented. Section IV illustrates ease studies that utilize solar applications in the building design.

  16. Solar Adaptive Optics

    Directory of Open Access Journals (Sweden)

    Thomas R. Rimmele

    2011-06-01

    Full Text Available Adaptive optics (AO has become an indispensable tool at ground-based solar telescopes. AO enables the ground-based observer to overcome the adverse effects of atmospheric seeing and obtain diffraction limited observations. Over the last decade adaptive optics systems have been deployed at major ground-based solar telescopes and revitalized ground-based solar astronomy. The relatively small aperture of solar telescopes and the bright source make solar AO possible for visible wavelengths where the majority of solar observations are still performed. Solar AO systems enable diffraction limited observations of the Sun for a significant fraction of the available observing time at ground-based solar telescopes, which often have a larger aperture than equivalent space based observatories, such as HINODE. New ground breaking scientific results have been achieved with solar adaptive optics and this trend continues. New large aperture telescopes are currently being deployed or are under construction. With the aid of solar AO these telescopes will obtain observations of the highly structured and dynamic solar atmosphere with unprecedented resolution. This paper reviews solar adaptive optics techniques and summarizes the recent progress in the field of solar adaptive optics. An outlook to future solar AO developments, including a discussion of Multi-Conjugate AO (MCAO and Ground-Layer AO (GLAO will be given.

  17. Solar Adaptive Optics.

    Science.gov (United States)

    Rimmele, Thomas R; Marino, Jose

    Adaptive optics (AO) has become an indispensable tool at ground-based solar telescopes. AO enables the ground-based observer to overcome the adverse effects of atmospheric seeing and obtain diffraction limited observations. Over the last decade adaptive optics systems have been deployed at major ground-based solar telescopes and revitalized ground-based solar astronomy. The relatively small aperture of solar telescopes and the bright source make solar AO possible for visible wavelengths where the majority of solar observations are still performed. Solar AO systems enable diffraction limited observations of the Sun for a significant fraction of the available observing time at ground-based solar telescopes, which often have a larger aperture than equivalent space based observatories, such as HINODE. New ground breaking scientific results have been achieved with solar adaptive optics and this trend continues. New large aperture telescopes are currently being deployed or are under construction. With the aid of solar AO these telescopes will obtain observations of the highly structured and dynamic solar atmosphere with unprecedented resolution. This paper reviews solar adaptive optics techniques and summarizes the recent progress in the field of solar adaptive optics. An outlook to future solar AO developments, including a discussion of Multi-Conjugate AO (MCAO) and Ground-Layer AO (GLAO) will be given. Supplementary material is available for this article at 10.12942/lrsp-2011-2.

  18. Principles of solar engineering

    CERN Document Server

    Goswami, D Yogi

    2015-01-01

    Introduction to Solar Energy ConversionGlobal Energy Needs and ResourcesSolar EnergyEnergy StorageEconomics of Solar SystemsSummary of RE ResourcesForecast of Future Energy MixReferencesFundamentals of Solar RadiationThe Physics of the Sun and Its Energy TransportThermal Radiation FundamentalsSun-Earth Geometric RelationshipSolar RadiationEstimation of Terrestrial Solar RadiationModels Based on Long-Term Measured Horizontal Solar RadiationMeasurement of Solar RadiationSolar Radiation Mapping Using Satellite DataReferencesSuggested ReadingsSolar Thermal CollectorsRadiative Properties and Characteristics of MaterialsFlat-Plate CollectorsTubular Solar Energy CollectorsExperimental Testing of CollectorsConcentrating Solar CollectorsParabolic Trough ConcentratorCompound-Curvature Solar ConcentratorsCentral Receiver CollectorFresnel Reflectors and LensesSolar Concentrator SummaryReferencesSuggested ReadingThermal Energy Storage and TransportThermal Energy StorageTypes of TESDesign of Storage SystemEnergy Transport ...

  19. Introduction to solar cell production

    International Nuclear Information System (INIS)

    Kim, Gyeong Hae; Lee, Jun Sin

    2009-08-01

    This book introduces solar cell production. It is made up eight chapters, which are summary of solar cell with structure and prospect of the business, special variable of solar cell on light of the sun and factor causing variable of solar cell, production of solar cell with surface texturing, diffusion, metal printing dry and firing and edge isolation, process of solar cell on silicone wafer for solar cell, forming of electrodes, introduction of thin film solar cell on operating of solar cell, process of production and high efficiency of thin film solar cell, sorting of solar cell and production with background of silicone solar cell and thin film solar cell, structure and production of thin film solar cell and compound solar cell, introduction of solar cell module and the Industrial condition and prospect of solar cell.

  20. Golden Rays - July 2017 | Solar Research | Solar Research | NREL

    Science.gov (United States)

    , subscribe to the Solar Newsletter. SUBSCRIBE Hot Topics Two solar installers secure solar panels on the roof that has the potential to improve the efficiency of solar panels while leveraging existing

  1. SOLAR AIRCRAFT DESIGN

    OpenAIRE

    RAHMATI, Sadegh; GHASED, Amir

    2015-01-01

    Abstract. Generally domain Aircraft uses conventional fuel. These fuel having limited life, high cost and pollutant. Also nowadays price of petrol and other fuels are going to be higher, because of scarcity of those fuels. So there is great demand of use of non-exhaustible unlimited source of energy like solar energy. Solar aircraft is one of the ways to utilize solar energy. Solar aircraft uses solar panel to collect the solar radiation for immediate use but it also store the remaining part ...

  2. Seguimiento de la reactogenicidad de la vacuna DTP cubana, utilizando dos métodos paralelos

    Directory of Open Access Journals (Sweden)

    María de los Ángeles Peña Machado

    2005-05-01

    Full Text Available Con el objetivo de caracterizar la reactogenicidad de la vacuna Antidiftérica-Antitetánica- Antipertusis (DTP cubana, desarrollada por el Instituto Finlay, se realizó un estudio utilizando dos métodos o fuentes de información diferentes y paralelos. La primera se obtuvo de un ensayo clínico (EC Fase IV, abierto, no controlado, en el que se incluyeron 57 lactantes. La segunda fuente de información se obtuvo de los reportes de los eventos temporalmente asociados a la vacunación (ETAV, recepcionados por la Unidad Coordinadora Nacional de Farmacovigilancia (UCNFv que incluyen a 86 lactantes que fueron atendidos por sospechas de ETAV. En el EC se aplicaron 167 dosis, los eventos adversos esperados e inesperados se observaron en un escaso número de lactantes, fueron mayoritariamente ligeros y autolimitados en el tiempo y su frecuencia de aparición se redujo en la 2da y 3ra dosis. El dolor fue el evento local más frecuente y la fiebre fue el evento general que más se presentó. No se reportaron vómitos y la anorexia, la somnolencia, y el llanto persistente aparecieron en un número limitado de sujetos vacunados.Se presentaron 12 eventos no esperados, solo en 2 de ellos se consideró que existía relación causal con la vacunación. Se reportó un evento adverso grave (niña hospitalizada por síndrome febril prolongado postvacunación, que se estudió y demostró que fue causado por una sepsis urinaria persistente provocada por una malformación vesico-ureteral. Los 86 reportes recepcionados por la UCNFv incluían un total de 141 ETAV, dentro de los síntomas locales, el eritema alcanzó un 9,30% y la induración un 5,81%, la fiebre fue un síntoma frecuente aunque no se especifica la temperatura corporal alcanzada. Aunque existen varias diferencias con relación a las condiciones en que se realiza la vigilancia de eventos adversos en un EC o en la práctica clínica habitual, los resultados aquí analizados nos confirman que la

  3. Solar Resource Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Renne, D.; George, R.; Wilcox, S.; Stoffel, T.; Myers, D.; Heimiller, D.

    2008-02-01

    This report covers the solar resource assessment aspects of the Renewable Systems Interconnection study. The status of solar resource assessment in the United States is described, and summaries of the availability of modeled data sets are provided.

  4. Solar engineering 1994

    International Nuclear Information System (INIS)

    Klett, D.E.; Hogan, R.E.; Tanaka, Tadayoshi

    1994-01-01

    This volume of 83 papers constitutes the Proceedings of the 1994 International Solar Energy Conference held March 27--30, 1994 in San Francisco, California. The Conference was jointly sponsored by the Solar Energy Division of the American Society of Mechanical Engineers, The Japan Society of Mechanical Engineers and the Japan Solar Energy Society. This is the fourth cooperation between ASME, JSME and JSES in cosponsoring the International Solar Energy Conference. The papers cover a wide range of solar technologies from low temperature solar ponds and desalinization to high temperature concentrators for space applications and central receivers for terrestrial power generation. Other topics covered include solar detoxification of hazardous waste, dish Stirling systems, solar cooling, photovoltaics, building energy analysis and conservation, simulation, and testing and measurement techniques. All papers were indexed separately for the data base

  5. Solar renovation demonstration projects

    Energy Technology Data Exchange (ETDEWEB)

    Bruun Joergensen, O [ed.

    1998-10-01

    In the framework of the IEA SHC Programme, a Task on building renovation was initiated, `Task 20, Solar Energy in Building Renovation`. In a part of the task, Subtask C `Design of Solar Renovation Projects`, different solar renovation demonstration projects were developed. The objective of Subtask C was to demonstrate the application of advanced solar renovation concepts on real buildings. This report documents 16 different solar renovation demonstration projects including the design processes of the projects. The projects include the renovation of houses, schools, laboratories, and factories. Several solar techniques were used: building integrated solar collectors, glazed balconies, ventilated solar walls, transparent insulation, second skin facades, daylight elements and photovoltaic systems. These techniques are used in several simple as well as more complex system designs. (au)

  6. Solar Indices - Sunspot Numbers

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of indices related to solar activity contributed by a number of national and private solar observatories located worldwide. This...

  7. Solar ultraviolet hazards

    International Nuclear Information System (INIS)

    Azmah Ali

    1995-01-01

    The paper discussed the following subjects: the sources of ultraviolet radiation, solar ultraviolet radiation definition, effects of over exposure to solar ultraviolet radiation, exposure limits and radiation protection of this radiation

  8. Solar Indices - Plage Regions

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of indices related to solar activity contributed by a number of national and private solar observatories located worldwide. This...

  9. Solar energy promises realized?

    International Nuclear Information System (INIS)

    Oudshoff, B.

    2010-01-01

    The US market for solar cells grew 36% in 2009. Thousands of new jobs were created, many millions are invested and new businesses see new opportunities. Optimism among investors, incentivising government policy and new technological developments all contribute to these positive developments. This article provides an update of the incentive measures and their effects and a brief overview of the three solar energy technologies: photovoltaic (PV), solar thermal and concentrated solar power (CSP) [nl

  10. Controle de um pré-regulador com alto fator de potência utilizando microcontrolador PIC /

    OpenAIRE

    Grosse, Alexandre de Souza

    1999-01-01

    Dissertação (Mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Estudo de controle digital em eletrônica de potência utilizando um microcontrolador especial PIC17C756 em um pré-regulador para correção ativa do fator de potência. O enfoque principal é dado no controle da malha de corrente do conversor elevador utilizado. Parte-se da caracterização do microcontrolador e seus periféricos e prossegue-se através do projeto do conversor BOOST. São apresentadas as técnicas de...

  11. Desenvolvimento de recobrimento retardante de chama em tecido de algodão utilizando bentonita sódica

    OpenAIRE

    Zottis, Ricardo

    2012-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Programa de Pós-Graduação em Engenharia Química Os acabamentos retardantes de chama são substâncias aplicadas nos substratos têxteis com intuito de dificultar a ignição e tornar demorada a propagação da chama, reduzindo os riscos de incêndios. Neste trabalho foi investigada a incorporação de argila no tratamento retardante de chama em tecido de algodão utilizando bentonita sódica juntamente com aditivos fo...

  12. IDENTIFICACION DEL CILINDRO NUDOSO EN IMÁGENES TC DE TROZAS PODADAS DE PINUS RADIATA UTILIZANDO REDES NEURONALES ARTIFICIALES

    OpenAIRE

    Rojas Espinoza,Gerson; Ortiz Irribarren,Oscar

    2010-01-01

    La factibilidad de identificar el cilindro nudoso en imágenes de tomografía computarizada de rayos X (TC) de trozas podadas de pino radiata (Pinus radiata D. Don), fue evaluada utilizando un método de clasificación supervisada basado en Redes Neuronales Artificiales (RNA). El proceso de clasificación consideró también la identificación de la zona libre de defectos y nudos. Treinta trozas podadas de pino radiata fueron escaneadas en un escáner médico multi-slice de rayos X, donde las imágenes ...

  13. Obtención de un hidrolizado proteico por fermentación sumergida de plumas utilizando Bacillus spp

    OpenAIRE

    De Macedo, Manuel; Segura, Roxana; Piñero B., Judith; Coello, Nereida

    2009-01-01

    Se obtuvo un hidrolizado proteico a partir de la fermentación sumergida de las plumas por una cepa queratinolítica de Bacillus spp designada como LPB-2. El proceso se realizó en condiciones aeróbicas, utilizando un medio salino basal (pH 7,5), suplementado con 20 g/l de plumas molidas y un fermentador de 6 L de capacidad regulado a 40° C durante 26 horas. Mediante alimentaciones semi-continuas de sustrato, efectuadas cada 12 horas, se pudo prolongar el tiempo de fermentación hasta 58 horas. A...

  14. Sorologia da hanseníase utilizando PGL-I: revisão sistemática

    OpenAIRE

    Moura,Rodrigo Scaliante de; Calado,Karla Lucena; Oliveira,Maria Leide W.; Bührer-Sékula,Samira

    2008-01-01

    A sorologia utilizando o antígeno espécie-específico do Mycobacterium leprae, PGL-I, pode ser um marcador de carga bacteriana em pacientes com hanseníase. Estudos identificaram potencial de uso da sorologia na classificação de pacientes para fins de tratamento, monitoramento de terapia, risco de recidiva e na seleção dos contatos com maior risco de adoecer. Foi realizada uma revisão sistemática e 26 artigos foram incluídos na análise comparativa. Avaliamos os resultados do uso da sorologia PG...

  15. Comportamento de reator de leito fluidizado trifásico aeróbico utilizando diferentes materiais suporte

    OpenAIRE

    Martins, Cláudia Lavina

    2003-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Programa de Pós-Graduação em Engenharia Ambiental. Este trabalho apresenta estudos realizados com reator de leito fluidizado trifásico aeróbio (RLFTA), aplicado ao tratamento de esgoto sanitário, tendo como objetivo avaliar seu comportamento utilizando diferentes materiais suporte: PET, OSBG® e PVC. Foram aplicadas cargas orgânicas volumétricas (COV) de 13 a 29 Kg DQO/m3.dia e tempo de retenção hidráulica ...

  16. Estudo da degradação do metil parabeno utilizando processos Fenton, foto-Fenton e eletro-Fenton

    OpenAIRE

    Carlos Dante Gamarra Güere

    2014-01-01

    Os disruptores endócrinos são frequentemente relatados na literatura como contaminantes de ambientes aquáticos. Por isso, os processos oxidativos avançados (POAs) têm sido estudados como alternativa para o tratamento em meio aquoso. Os POAs consistem na oxidação de compostos orgânicos por radicais hidroxilas com alto poder oxidante. Diante desses aspectos, o presente trabalho tem como principal objetivo o estudo da degradação do metil parabeno (MeP) por processos Fenton, utilizando planejame...

  17. Procedimiento para la gestión de mantenimiento utilizando herramientas de la cuarta generación

    OpenAIRE

    Aracelis Barrios; Maritza Ortiz

    2013-01-01

    El presente artículo presenta el diseño de un procedimiento para una gestión de mantenimiento sistémico, utilizando un conjunto de herramientas, que enfocan el uso de los recursos de la empresa asociados con las Personas, los Procesos y la Tecnología, orientados a mejorar la productividad, la toma de decisiones acertadas y a maximizar el rendimiento de los equipos, considerando entre otros, los factores de Confiabilidad, Mantenibilidad, Seguridad, Calidad y Medio Ambiente. El desarrollo del p...

  18. Arquitectura para balancear carga dinámica por demanda adaptativa, utilizando CORBA en JAVA-IDL

    OpenAIRE

    Jesús Chávez Esparza; Gerardo Rentería Castillo; Francisco Javier Luna Rosas

    2008-01-01

    En este trabajo desglosaremos la elaboración de una nueva Arquitectura para balancear carga dinámica, por demanda adaptativa, utilizando CORBA en JAVA-IDL. Una arquitectura de balanceo de carga es un sistema que permite distribuir el trabajo computacional entre varias máquinas, con el objetivo de reducir el tiempo de respuesta global del sistema. A través de las pruebas se justifica el uso de la arquitectura y se definen los parámetros a considerar para obtener un óptimo desempeño, refiriéndo...

  19. Generando entornos de investigación y desarrollo utilizando redes inalámbricas de sensores (WSN)

    OpenAIRE

    Sosa, Eduardo Omar; Godoy, Diego Alberto

    2013-01-01

    Las Redes Inalámbricas de Sensores (WSN) jugarán un papel preponderante tanto en las actividades académicas y como en el desarrollo en nuestro país. En este artículo se reportan actividades desarrolladas en dos universidades argentinas, utilizando a la tecnología WSN como disparador de actividades de investigación, desarrollo. La aplicación de ésta tecnología de última generación se enmarcan en el dominio de “Internet de las Cosas” y “Ciudades Inteligentes”. Las actividades teórico-práctic...

  20. Reconocimiento y control de calidad de engranajes utilizando técnicas algoritmicas de tratamiento digital de imagenes

    OpenAIRE

    Sotelo Valer, Freddy; Sotelo Valer, Freddy

    2005-01-01

    La presente tesis está constituida por el desarrollo, simulación e implementación de técnicas de procesamiento digital de imágenes por visión artificial, mediante compiladora y su aplicación en el control de calidad de engranajes. EJ trabajo fundamentalmente se ha realizado en tres etapas: 1. Se desarrollaron los algoritmos para procesos puntuales necesarios en el sistema de control de calidad. 2. Los algoritmos desarrollados en la etapa inicial fueron verificados utilizando como sop...

  1. BOMBEAMENTO DE ÁGUA NO MEIO RURAL UTILIZANDO UM CARNEIRO HIDRÁLICO DE BAIXO CUSTO

    OpenAIRE

    Costa, Niedja Bezerra; Silva, Raphael Pereira; Silva, Wilson Araújo da

    2013-01-01

    RESUMO: A recente crise da energia convencional tem ocasionado a exploração de fontes alternativas de energias para suprir usos doméstico, industrial e agrícola. O carneiro hidráulico ou aríete hidráulico é uma máquina simples que possui características geratriz e operatriz. A fonte de energia é a altura de queda d’água que, em geral, é produzida artificialmente por meio de pequena barragem. O bombeamento de água utilizando carneiro hidráulico é amplamente empregado em muitas propriedades, pr...

  2. Solar Energy Technician/Installer

    Science.gov (United States)

    Moore, Pam

    2007-01-01

    Solar power (also known as solar energy) is solar radiation emitted from the sun. Large panels that absorb the sun's energy as the sun beats down on them gather solar power. The energy in the rays can be used for heat (solar thermal energy) or converted to electricity (photovoltaic energy). Each solar energy project, from conception to…

  3. Thermal solar energy

    International Nuclear Information System (INIS)

    Gonzalez, J.C.; Leal C, H.

    1998-01-01

    Some relative aspects to the development and current state of thermal solar energy are summarized, so much at domestic level as international. To facilitate the criteria understanding as the size of the facilities in thermal solar systems, topics as availability of the solar resource and its interactions with the matter are included. Finally, some perspectives for the development of this energetic alternative are presented

  4. Solar tracking system

    Science.gov (United States)

    Okandan, Murat; Nielson, Gregory N.

    2016-07-12

    Solar tracking systems, as well as methods of using such solar tracking systems, are disclosed. More particularly, embodiments of the solar tracking systems include lateral supports horizontally positioned between uprights to support photovoltaic modules. The lateral supports may be raised and lowered along the uprights or translated to cause the photovoltaic modules to track the moving sun.

  5. Solar Research | NREL

    Science.gov (United States)

    Research Photo of a city landscape with a sun in the background. Solar energy research at NREL includes photovoltaics, concentrating solar power, solar grid and systems integration, and market research and analysis. Photovoltaic Research Photo of a roof-mounted PV array on the NREL campus. NREL's

  6. Alternatives in solar energy

    Science.gov (United States)

    Schueler, D. G.

    1978-01-01

    Although solar energy has the potential of providing a significant source of clean and renewable energy for a variety of applications, it is expected to penetrate the nation's energy economy very slowly. The alternative solar energy technologies which employ direct collection and conversion of solar radiation as briefly described.

  7. Solar cell concentrating system

    International Nuclear Information System (INIS)

    Garg, H.P.; Sharma, V.K.; Agarwal, R.K.

    1986-11-01

    This study reviews fabrication techniques and testing facilities for different solar cells under concentration which have been developed and tested. It is also aimed to examine solar energy concentrators which are prospective candidates for photovoltaic concentrator systems. This may provide an impetus to the scientists working in the area of solar cell technology

  8. Nanostructured Organic Solar Cells

    DEFF Research Database (Denmark)

    Radziwon, Michal Jędrzej; Rubahn, Horst-Günter; Madsen, Morten

    Recent forecasts for alternative energy generation predict emerging importance of supporting state of art photovoltaic solar cells with their organic equivalents. Despite their significantly lower efficiency, number of application niches are suitable for organic solar cells. This work reveals...... the principles of bulk heterojunction organic solar cells fabrication as well as summarises major differences in physics of their operation....

  9. Solar sail deployment experiment

    OpenAIRE

    Shimose, Shigeru; 下瀬 滋

    2006-01-01

    Solar Sail move by receiving momentum of photons in sunlight. This paper presents results of some Spin-Stabilized Solar Sail deployment experiment. ISAS has successfully deployed, for the first time in the world, the polyimide Solar Sail taking advantage of centrifugal force in space. Based on this result, the new deployment mechanism is being developed which retracts the 50 m diameter sail.

  10. Solar Photovoltaic Cells.

    Science.gov (United States)

    Mickey, Charles D.

    1981-01-01

    Reviews information on solar radiation as an energy source. Discusses these topics: the key photovoltaic material; the bank theory of solids; conductors, semiconductors, and insulators; impurity semiconductors; solid-state photovoltaic cell operation; limitations on solar cell efficiency; silicon solar cells; cadmium sulfide/copper (I) sulfide…

  11. Connectable solar air collectors

    Energy Technology Data Exchange (ETDEWEB)

    Oestergaard Jensen, S.; Bosanac, M.

    2002-02-01

    The project has proved that it is possible to manufacture solar air collector panels, which in an easy way can be connected into large collector arrays with integrated ducting without loss of efficiency. The developed connectable solar air collectors are based on the use of matrix absorbers in the form of perforated metal sheets. Three interconnected solar air collectors of the above type - each with an transparent area of approx. 3 m{sup 2} - was tested and compared with parallel tests on two single solar air collectors also with a transparent area of approx. 3 m{sup 2} One of the single solar air collectors has an identical absorber as the connectable solar air collectors while the absorber of the other single solar air collector was a fibre cloth. The efficiency of the three solar air collectors proved to be almost identical in the investigated range of mass flow rates and temperature differences. The solar air collectors further proved to be very efficient - as efficient as the second most efficient solar air collectors tested in the IEA task 19 project Solar Air Systems. Some problems remain although to be solved: the pressure drop across especially the connectable solar air collectors is too high - mainly across the inlets of the solar air collectors. It should, however, be possible to considerably reduce the pressure losses with a more aerodynamic design of the inlet and outlet of the solar air collectors; The connectable solar air collectors are easy connectable but the air tightness of the connections in the present form is not good enough. As leakage leads to lower efficiencies focus should be put on making the connections more air tight without loosing the easiness in connecting the solar air collectors. As a spin off of the project a simple and easy way to determine the efficiency of solar, air collectors for pre-heating of fresh air has been validated. The simple method of determining the efficiency has with success been compared with an advance method

  12. Solar Proton Events in Six Solar Cycles

    Science.gov (United States)

    Vitaly, Ishkov

    Based on materials the catalogs of solar proton events (SPE) in 1955 ‒ 2010 and list SPE for the current 24 solar cycle (SC) are examined confirmed SPE with E> 10 MeV proton flux in excess of 1 proton cm-2 s ster-1 (pfu) from Švestka and Simon’s (1955 - 1969) and 5 volumes Logachev’s (1970 - 2006) Catalogs of SPE. Historically thus it was formed, that the measurements of the proton fluxes began in the epoch “increased” solar activity (SC 18 ‒ 22), and includes transition period of the solar magnetic fields reconstruction from epoch “increased” to the epoch “lowered” solar activity (22 ‒ 23 SC). In current 24 SC ‒ first SC of the incipient epoch of “lowered” SA ‒ SPE realize under the new conditions, to that of previously not observed. As showed a study of five solar cycles with the reliable measurements of E> 10 MeV proton flux in excess of 1 pfu (1964 - 2013): ‒ a quantity of SPEs remained approximately identical in SC 20, 21, somewhat decreased in the initial solar cycle of the solar magnetic fields reconstruction period (22), but it returned to the same quantity in, the base for the period of reconstruction, SC 23. ‒ Into the first 5 years of the each solar cycle development the rate of the proton generation events noticeably increased in 22 cycles of solar activity and returned to the average in cycles 23 and 24. ‒ Extreme solar flare events are achieved, as a rule, in the solar magnetic fields reconstruction period (August - September 1859; June 1991; October ‒ November 2003.), it is confirmed also for SPE: the extreme fluxes of solar protons (S4) except one (August 1972) were occurred in period of perestroika (SC 22 and 23). This can speak, that inside the epochs SA, when the generation of magnetic field in the convective zone works in the steady-state regime, extreme SPE are improbable. ‒ The largest in the fluxes of protons (S3, S4) occur in the complexes of the active regions flare events, where magnetic field more

  13. Hydrogen from solar energy

    Energy Technology Data Exchange (ETDEWEB)

    1977-04-01

    The long-range options of energy sources are the breeding reactor, nuclear fusion, and solar energy. Concerning solar energy three systems are being developed: First the photovoltaic cells which are almost ready for industrial production, but which are still too expensive - at least today. Secondly the thermal utilization of solar radiation. Compared to these, thirdly, the photobiological and photochemical possibilities of solar energy utilization have been somewhat neglected so far. However, the photolysis of water by solar energy is a very promising option for future energy demands. This can be done by making use of the photo-synthetic splitting of water in technical facilities or with semiconductors.

  14. Solar energy conversion systems

    CERN Document Server

    Brownson, Jeffrey R S

    2013-01-01

    Solar energy conversion requires a different mind-set from traditional energy engineering in order to assess distribution, scales of use, systems design, predictive economic models for fluctuating solar resources, and planning to address transient cycles and social adoption. Solar Energy Conversion Systems examines solar energy conversion as an integrative design process, applying systems thinking methods to a solid knowledge base for creators of solar energy systems. This approach permits different levels of access for the emerging broad audience of scientists, engineers, architects, planners

  15. Solar radiation absorbing material

    Science.gov (United States)

    Googin, John M.; Schmitt, Charles R.; Schreyer, James M.; Whitehead, Harlan D.

    1977-01-01

    Solar energy absorbing means in solar collectors are provided by a solar selective carbon surface. A solar selective carbon surface is a microporous carbon surface having pores within the range of 0.2 to 2 micrometers. Such a surface is provided in a microporous carbon article by controlling the pore size. A thermally conductive substrate is provided with a solar selective surface by adhering an array of carbon particles in a suitable binder to the substrate, a majority of said particles having diameters within the range of about 0.2-10 microns.

  16. Solar energy in Israel

    International Nuclear Information System (INIS)

    Zvirin, Y.; Zamkow, S.

    1993-01-01

    The state of Israel has been a pioneer in the solar energy development and utilization since it was founded. In the 50's solar domestic home heaters became commercially available. At the same time research work has been started in different areas of solar energy, which led to more advanced solar systems for additional applications. The presentation includes some details of commercial utilization of solar energy and a brief description of the main Research and Development projects in industry, universities and research institutes. (authors)

  17. The solar probe mission

    International Nuclear Information System (INIS)

    Feldman, W.C.; Anderson, J.; Bohlin, J.D.; Burlaga, L.F.; Farquhar, R.; Gloeckler, G.; Goldstein, B.E.; Harvey, J.W.; Holzer, T.E.; Jones, W.V.; Kellogg, P.J.; Krimigis, S.M.; Kundu, M.R.; Lazarus, A.J.; Mellott, M.M.; Parker, E.N.; Rosner, R.; Rottman, G.J.; Slavin, J.A.; Suess, S.T.; Tsurutani, B.T.; Woo, R.T.; Zwickl, R.D.

    1990-01-01

    The Solar Probe will deliver a 133.5 kg science payload into a 4 R s perihelion solar polar orbit (with the first perihelion passage in 2004) to explore in situ one of the last frontiers in the solar system---the solar corona. This mission is both affordable and technologically feasible. Using a payload of 12 (predominantly particles and fields) scientific experiments, it will be possible to answer many long-standing, fundamental problems concerning the structure and dynamics of the outer solar atmosphere, including the acceleration, storage, and transport of energetic particles near the Sun and in the inner ( s ) heliosphere

  18. Sun and solar flares

    Energy Technology Data Exchange (ETDEWEB)

    McKenna-Lawlor, S. (Saint Patrick' s Coll., Maynooth (Ireland))

    1982-07-01

    The subject is discussed under the headings: the sun's core (thermonuclear reactions, energy transfer from core through radiation zone, convection zone, photosphere, chromosphere and corona); the photosphere (convection, granulation, sunspots, magnetic fields, solar cycle, rotation of the sun); solar variability and paleoclimatic records (correlation of low solar activity with increased /sup 14/C production in atmosphere); the chromosphere and corona (turbulence, temperature, coronal streamers, energy transfer); solar flares (cosmic rays, aurorae, spectra, velocity of flares, prominences, mechanisms of flares); the solar wind.

  19. Solar irridiance variations and solar activity

    International Nuclear Information System (INIS)

    Willson, R.C.

    1982-01-01

    A mean value for the 1 AU total solar irradiance of 1368.2 W/m 2 and a downward trend of 0.05% per year were derived from measurements by the Active Cavity Radiometer Irradiance Monitor (ACRIM) experiment on the Solar Maximum Mission during 1980. Distinct temporary solar irradiance decreases associated with solar activity maxima were observed with a series of nine dips from April to October recurring at fairly regular intervals averaging 24 days. The decreases correlate inversely with sunspot area, 2800-MHz flux, and Zurich sunspot number. Dominant periods common to the irradiance and sunspot area power spectra link the irradiance decreases to sunspot flux deficit in solar active regions. Evidence of significant total irradiance modulation by facular flux excess is cited. A persistent radiative cycle of active regions consistent with the ACRIM irradiance results and the morphology of solar active regions was found. The pattern of regularly recurrent active region maxima between April and October suggests an asymmetry in solar activity generation during this period

  20. Radiopacity of restorative materials using digital images Radiopacidade de materiais restauradores utilizando imagens digitais

    Directory of Open Access Journals (Sweden)

    Leda Maria Pescinini Salzedas

    2006-04-01

    Full Text Available The radiopacity of esthetic restorative materials has been established as an important requirement, improving the radiographic diagnosis. The aim of this study was to evaluate the radiopacity of six restorative materials using a direct digital image system, comparing them to the dental tissues (enamel-dentin, expressed as equivalent thickness of aluminum (millimeters of aluminum. Five specimens of each material were made. Three 2-mm thick longitudinal sections were cut from an intact extracted permanent molar tooth (including enamel and dentin. An aluminum step wedge with 9 steps was used. The samples of different materials were placed on a phosphor plate together with a tooth section, aluminum step wedge and metal code letter, and were exposed using a dental x-ray unit. Five measurements of radiographic density were obtained from each image of each item assessed (restorative material, enamel, dentin, each step of the aluminum step wedge and the mean of these values was calculated. Radiopacity values were subsequently calculated as equivalents of aluminum thickness. Analysis of variance (ANOVA indicated significant differences in radiopacity values among the materials (PA radiopacidade dos materiais tem sido valorizada como importante requisito, incrementando o diagnóstico radiográfico. O objetivo deste estudo foi avaliar, no sistema digital Digora, as densidades radiográficas de 06 materiais restauradores comparando-os aos tecidos dentais (esmalte e dentina, expressos em milímetros de alumínio (mm Al. Foram confeccionadas 05 amostras de cada material e três cortes de um molar extraído hígido (incluindo esmalte e dentina, com 2 mm de espessura, e um penetrômetro de alumínio com 09 degraus. Sobre cada placa óptica foram colocados amostras dos diferentes materiais, um corte do dente humano, o penetrômetro e a identificação, e feita a exposição utilizando um aparelho de raios X. Foram obtidas 05 medidas de densidade radiográfica de

  1. Solar Power Sources

    DEFF Research Database (Denmark)

    Kim, Katherine A.; Mentesidi, Konstantina; Yang, Yongheng

    2017-01-01

    a significant change. Beyond this energy transition, the still declining cost of the solar technology has become an important driving force for more solar-powered systems. However, high penetration of solar-powered systems also brings technical challenges to the entire energy systems. In order to fully address......Solar power is highly abundant, relatively reliable, and not limited to a geographic region, making it one of the most important renewable energy sources. Catering for a clean and green energy system, solar energy will be an active player in the future mixed power grid that is also undergoing...... those issues, the technological properties of solar power should be investigated. Thus, the basics of solar power technology will be introduced and discussed in this chapter....

  2. Solar energy modulator

    Science.gov (United States)

    Hale, R. R. (Inventor); Mcdougal, A. R.

    1984-01-01

    A module is described with a receiver having a solar energy acceptance opening and supported by a mounting ring along the optic axis of a parabolic mirror in coaxial alignment for receiving solar energy from the mirror, and a solar flux modulator plate for varying the quantity of solar energy flux received by the acceptance opening of the module. The modulator plate is characterized by an annular, plate-like body, the internal diameter of which is equal to or slightly greater than the diameter of the solar energy acceptance opening of the receiver. Slave cylinders are connected to the modulator plate for supporting the plate for axial displacement along the axis of the mirror, therby shading the opening with respect to solar energy flux reflected from the surface of the mirror to the solar energy acceptance opening.

  3. Photovoltaic solar cell

    Science.gov (United States)

    Nielson, Gregory N.; Gupta, Vipin P.; Okandan, Murat; Watts, Michael R.

    2015-09-08

    A photovoltaic solar concentrator is disclosed with one or more transverse-junction solar cells (also termed point contact solar cells) and a lens located above each solar cell to concentrate sunlight onto the solar cell to generate electricity. Piezoelectric actuators tilt or translate each lens to track the sun using a feedback-control circuit which senses the electricity generated by one or more of the solar cells. The piezoelectric actuators can be coupled through a displacement-multiplier linkage to provide an increased range of movement of each lens. Each lens in the solar concentrator can be supported on a frame (also termed a tilt plate) having three legs, with the movement of the legs being controlled by the piezoelectric actuators.

  4. Frequency agile solar radiotelescope

    Science.gov (United States)

    Bastian, Tim S.

    2003-02-01

    The Frequency Agile Solar Radiotelescope (FASR) is a solar-dedicated, ground based, interferometric array optimized to perform broadband imaging spectroscopy from ~ 0.1-30+ GHz. It will do so with the angular, spectral, and temporal resolution required to exploit radio emission from the Sun as a diagnostic of the wide variety of astrophysical processes that occur there. FASR represents a major advance over existing radioheliographs, and is expected to remain the world's premier solar radio instrument for two decades or more after completion. FASR will be a versatile and powerful instrument, providing unique data to a broad users community. Solar, solar-terrestrial, and space physicists will exploit FASR to attack a broad science program, including problems of fundamental interest: coronal magnetography, solar flares and particle acceleration, drivers of space weather, and the thermal structure and dynamics of the solar atmosphere. A design study and implementation planning are underway. Recent progress is reviewed here.

  5. Photovoltaic solar concentrator

    Science.gov (United States)

    Nielson, Gregory N.; Gupta, Vipin P.; Okandan, Murat; Watts, Michael R.

    2016-03-15

    A photovoltaic solar concentrator is disclosed with one or more transverse-junction solar cells (also termed point contact solar cells) and a lens located above each solar cell to concentrate sunlight onto the solar cell to generate electricity. Piezoelectric actuators tilt or translate each lens to track the sun using a feedback-control circuit which senses the electricity generated by one or more of the solar cells. The piezoelectric actuators can be coupled through a displacement-multiplier linkage to provide an increased range of movement of each lens. Each lens in the solar concentrator can be supported on a frame (also termed a tilt plate) having three legs, with the movement of the legs being controlled by the piezoelectric actuators.

  6. Photovoltaic. Solar thermal. Solar thermal electricity

    International Nuclear Information System (INIS)

    2009-01-01

    The year 2008 was excellent for solar energy in the European Union. The growth of the installed capacity for photovoltaic was +159% (it means +4747.018 MW) to reach 9689.952 MW and that for solar thermal was +51.5% (it means +3172.5 MW) to reach 19982.7 MW. Worldwide concentrated solar thermal capacity stood at 679 MW in 2009, while this figure may seem low, the sector has a promising future ahead of it. (A.C.)

  7. Solar engineering of thermal processes

    CERN Document Server

    Duffie, John A

    2013-01-01

    The updated fourth edition of the ""bible"" of solar energy theory and applications Over several editions, Solar Engineering of Thermal Processes has become a classic solar engineering text and reference. This revised Fourth Edition offers current coverage of solar energy theory, systems design, and applications in different market sectors along with an emphasis on solar system design and analysis using simulations to help readers translate theory into practice. An important resource for students of solar engineering, solar energy, and alternative energy as well

  8. Solar Preheated Ventilation - Innovative Solar Technology

    National Research Council Canada - National Science Library

    Gaberson, Howard

    1999-01-01

    .... This innovative technology applies to both new construction or rehabilitation projects. This TDS introduces this low maintenance solar technology for consideration in all future industrial ventilation or HVAC projects...

  9. National Community Solar Platform

    Energy Technology Data Exchange (ETDEWEB)

    Rupert, Bart [Clean Energy Collective, Louisville, CO (United States)

    2016-06-30

    This project was created to provide a National Community Solar Platform (NCSP) portal known as Community Solar Hub, that is available to any entity or individual who wants to develop community solar. This has been done by providing a comprehensive portal to make CEC’s solutions, and other proven community solar solutions, externally available for everyone to access – making the process easy through proven platforms to protect subscribers, developers and utilities. The successful completion of this project provides these tools via a web platform and integration APIs, a wide spectrum of community solar projects included in the platform, multiple groups of customers (utilities, EPCs, and advocates) using the platform to develop community solar, and open access to anyone interested in community solar. CEC’s Incubator project includes web-based informational resources, integrated systems for project information and billing systems, and engagement with customers and users by community solar experts. The combined effort externalizes much of Clean Energy Collective’s industry-leading expertise, allowing third parties to develop community solar without duplicating expensive start-up efforts. The availability of this platform creates community solar projects that are cheaper to build and cheaper to participate in, furthering the goals of DOE’s SunShot Initiative. Final SF 425 Final SF 428 Final DOE F 2050.11 Final Report Narrative

  10. Solar energy guide

    International Nuclear Information System (INIS)

    Lentz, A.; Winter, R.

    1993-07-01

    Many aspects with regard to the practical use of solar energy are discussed. This guide is aimed at informing local and regional administrators, committee members of housing corporations and public utilities and public relations officers on the possibilities to use solar energy. In chapter one an overview is given of the use of solar energy in the housing sector, the recreational sector, agricultural sector, industry, trade and other sectors. In the chapters two, three and four attention is paid to passive solar energy, active thermal solar energy and photovoltaic energy respectively. In the chapters five and six aspects concerning the implementation of solar energy systems in practice are discussed. First an outline of the parties involved in implementing solar energy is given: the municipality, the energy utility, the province, local authorities, advisors, housing constructors and the occupants of the buildings. Then attention is paid to the consequences of implementing solar energy for the building inspection and regulations, the finances, energy savings and the environment. In chapter seven an overview is given of the subsidy regulations of the European Community, the Dutch national and local governments. Chapter contains addresses of solar thermal systems, photovoltaic systems and other institutes operating in the field of solar energy, as well as the titles of a number of brochures and courses. 51 figs., 7 tabs., 86 refs

  11. Solar Market Research and Analysis | Solar Research | NREL

    Science.gov (United States)

    Analysis Solar Market Research and Analysis Through rigorous data collection, analysis, and stakeholder engagement, NREL's Solar Market Research and Analysis efforts further solar technologies' role in solar panels. Key areas for NREL's solar market research and analysis portfolio include the following

  12. Solar Market Research and Analysis Projects | Solar Research | NREL

    Science.gov (United States)

    Market Research and Analysis Projects Solar Market Research and Analysis Projects Solar market research and analysis efforts at NREL seek to further solar technologies' role in supporting a more . Midscale Commercial Market Solar Analysis NREL experts are providing analysis to expand the midscale solar

  13. The Solar Energy Trifecta: Solar + Storage + Net Metering | State, Local,

    Science.gov (United States)

    and Tribal Governments | NREL The Solar Energy Trifecta: Solar + Storage + Net Metering The Solar Energy Trifecta: Solar + Storage + Net Metering February 12, 2018 by Benjamin Mow Massachusetts (DPU) seeking an advisory ruling on the eligibility of pairing solar-plus-storage systems with current

  14. PERFORMANCE EVALUATION OF SOLAR COLLECTORS USING A SOLAR SIMULATOR

    Directory of Open Access Journals (Sweden)

    M. Norhafana

    2015-11-01

    Full Text Available Solar water heating systems is one of the applications of solar energy. One of the components of a solar water heating system is a solar collector that consists of an absorber. The performance of the solar water heating system depends on the absorber in the solar collector. In countries with unsuitable weather conditions, the indoor testing of solar collectors with the use of a solar simulator is preferred. Thus, this study is conducted to use a multilayered absorber in the solar collector of a solar water heating system as well as to evaluate the performance of the solar collector in terms of useful heat of the multilayered absorber using the multidirectional ability of a solar simulator at several values of solar radiation. It is operated at three variables of solar radiation of 400 W/m2, 550 W/m2 and 700 W/m2 and using three different positions of angles at 0º, 45º and 90º. The results show that the multilayer absorber in the solar collector is only able to best adapt at 45° of solar simulator with different values of radiation intensity. At this angle the maximum values of useful heat and temperature difference are achieved. KEYWORDS: solar water heating system; solar collector; multilayered absorber; solar simulator; solar radiation 

  15. DIY Solar Market Analysis Webinar Series: Solar Resource and Technical

    Science.gov (United States)

    Series: Solar Resource and Technical Potential DIY Solar Market Analysis Webinar Series: Solar Resource and Technical Potential Wednesday, June 11, 2014 As part of a Do-It-Yourself Solar Market Analysis Potential | State, Local, and Tribal Governments | NREL DIY Solar Market Analysis Webinar

  16. Solar Thermal Energy; Energia Solar Termica

    Energy Technology Data Exchange (ETDEWEB)

    Perez-Martinez, M; Cuesta-Santianes, M J; Cabrera Jimenez, J A

    2008-07-01

    Approximately, 50 % of worldwide primary energy consumption is done in the form of heat in applications with a temperature lower than 250 degree centigree (low-medium temperature heat). These data clearly demonstrate the great potential of solar thermal energy to substitute conventional fossil fuels, which are becoming more expensive and are responsible for global warming. Low-medium temperature solar thermal energy is mainly used to obtain domestic hot water and provide space heating. Active solar thermal systems are those related to the use of solar thermal collectors. This study is dealing with low temperature solar thermal applications, mainly focusing on active solar thermal systems. This kind of systems has been extensively growing worldwide during the last years. At the end of 2006, the collector capacity in operation worldwide equalled 127.8 GWth. The technology is considered to be already developed and actions should be aimed at favouring a greater market penetration: diffusion, financial support, regulations establishment, etc. China and USA are the leading countries with a technology based on evacuated tube collectors and unglazed collectors, respectively. The rest of the world markets are dominated by the flat glazed collectors technology. (Author) 15 refs.

  17. Elaboración y caracterización estructural de fibras de tereftalato de polietileno (PET) dopadas con nanocobre (0) utilizando proceso de extrusión

    OpenAIRE

    Guzman, A.; Cárcamo, H.; León, O.

    2015-01-01

    El presente estudio describe la elaboración y caracterización de una fibra sintética bactericida compuesta por Tereftalato de Polietileno reciclado (rPET) y nanopartículas de cobre (0), mediante un proceso de extrusión utilizando una extrusora monohusillo. Las nanopartículas empleadas fueron elaboradas utilizando radiación microondas y ultrasonido. Para la elaboración de la fibra se produce un masterbatch de rPET con polvo de cobre nanométrico empleando un solvente de alto punto de fusión (tr...

  18. Direcionadores de preferencia para nectares de uva comerciais tradicionais e "lights" utilizando regressão por minimos quadrados parciais (PLSR).

    OpenAIRE

    Leonardo Rangel Alves

    2008-01-01

    Resumo: Este estudo objetivou Identificar direcionadores de preferência de oito amostras comerciais de néctar de uva (tradicionais e "light") utilizando metodologias estatísticas avançadas para relacionar dados de perfil sensorial, físico-químicos e aceitabilidade. Oito amostras comerciais de néctares de uva (quatro tradicionais e suas respectivas versões "light") foram analisadas. Um teste de Aceitação utilizando a escala hedônica híbrida foi realizado com 114 consumidores. Quatorze termos d...

  19. Hybrids of Solar Sail, Solar Electric, and Solar Thermal Propulsion for Solar-System Exploration

    Science.gov (United States)

    Wilcox, Brian H.

    2012-01-01

    Solar sails have long been known to be an attractive method of propulsion in the inner solar system if the areal density of the overall spacecraft (S/C) could be reduced to approx.10 g/sq m. It has also long been recognized that the figure (precise shape) of useful solar sails needs to be reasonably good, so that the reflected light goes mostly in the desired direction. If one could make large reflective surfaces with reasonable figure at an areal density of approx.10 g/sq m, then several other attractive options emerge. One is to use such sails as solar concentrators for solar-electric propulsion. Current flight solar arrays have a specific output of approx. 100W/kg at 1 Astronomical Unit (AU) from the sun, and near-term advances promise to significantly increase this figure. A S/C with an areal density of 10 g/sq m could accelerate up to 29 km/s per year as a solar sail at 1 AU. Using the same sail as a concentrator at 30 AU, the same spacecraft could have up to approx. 45 W of electric power per kg of total S/C mass available for electric propulsion (EP). With an EP system that is 50% power-efficient, exhausting 10% of the initial S/C mass per year as propellant, the exhaust velocity is approx. 119 km/s and the acceleration is approx. 12 km/s per year. This hybrid thus opens attractive options for missions to the outer solar system, including sample-return missions. If solar-thermal propulsion were perfected, it would offer an attractive intermediate between solar sailing in the inner solar system and solar electric propulsion for the outer solar system. In the example above, both the solar sail and solar electric systems don't have a specific impulse that is near-optimal for the mission. Solar thermal propulsion, with an exhaust velocity of the order of 10 km/s, is better matched to many solar system exploration missions. This paper derives the basic relationships between these three propulsion options and gives examples of missions that might be enabled by

  20. Solar opacities constrained by solar neutrinos and solar oscillations

    International Nuclear Information System (INIS)

    Cox, A.N.

    1989-01-01

    This review discusses the current situation for opacities at the solar center, the solar surface, and for the few million kelvin temperatures that occur below the convection zone. The solar center conditions are important because they are crucial for the neutrino production, which continues to be predicted about 4 times that observed. The main extinction effects there are free-free photon absorption in the electric fields of the hydrogen, helium and the CNO atoms, free electron scattering of photons, and the bound-free and bound-bound absorption of photons by iron atoms with two electrons in the 1s bound level. An assumption that the iron is condensed-out below the convection zone, and the opacity in the central regions is thereby reduced, results in about a 25 percent reduction in the central opacity but only a 5 percent reduction at the base of the convection zone. Furthermore, the p-mode solar oscillations are changed with this assumption, and do not fit the observed ones as well as for standard models. A discussion of the large effective opacity reduction by weakly interacting massive particles also results in poor agreement with observed p-mode oscillation frequencies. The much larger opacities for the solar surface layers from the Los Alamos Astrophysical Opacity Library instead of the widely used Cox and Tabor values show small improvements in oscillation frequency predictions, but the largest effect is in the discussion of p-mode stability. Solar oscillation frequencies can serve as an opacity experiment for the temperatures and densities, respectively, of a few million kelvin and between 0.1 and 10 g/cm 3 . Current oscillation frequency calculations indicate that possibly the Opacity Library values need an increase of typically 15 percent just at the bottom of the convection zone at 3 x 10 6 K. 41 refs., 15 figs., 1 tab

  1. Intolerância glicêmica e o prognóstico perinatal em gestantes utilizando anti-retrovirais

    Directory of Open Access Journals (Sweden)

    El Beitune Patrícia

    2003-01-01

    Full Text Available OBJETIVOS: estudar o efeito das drogas anti-retrovirais sobre o metabolismo glicêmico em gestantes portadoras do HIV-1 e a ação dessas medicações sobre o prognóstico perinatal. MÉTODOS: estudo prospectivo realizado em 57 gestantes divididas em três grupos: grupo AZT, utilizando zidovudina (n=20; grupo TT, utilizando zidovudina+lamivudina+nelfinavir (n=25, e grupo controle, gestantes normais (n=12. Obteve-se a área sob a curva (ASC das glicemias após teste oral de tolerância à glicose com 75 g de glicose em quatro oportunidades durante a gravidez (1º=14-20 semanas, 2º=21-26 semanas, 3º=27-32 semanas e 4º=33-38 semanas. O prognóstico perinatal levou em consideração as taxas de prematuridade, restrição de crescimento intra-útero (RCIU, baixo peso ao nascer, mortalidade perinatal e transmissão vertical do HIV-1. Os dados foram analisados utilizando-se os testes não paramétricos do c², de Friedman e de Kruskal-Wallis. RESULTADOS: os valores da mediana da ASC foi de 11.685 mg/dL-2h para o grupo controle, 13.477 mg/dL-2h para o grupo AZT e 13.650 mg/dL-2h para o grupo TT (p=0,049. Não se observou efeito deletério dos anti-retrovirais sobre as taxas de prematuridade, baixo peso ao nascer, RCIU e índices de Apgar. Não houve nenhum caso de transmissão vertical do HIV-1. CONCLUSÕES: verificou-se o desenvolvimento de intolerância glicêmica em gestantes que utilizaram tratamento tríplice, não sendo observado naquelas que utilizaram apenas AZT. Não houve efeitos deletérios dos anti-retrovirais sobre o prognóstico perinatal.

  2. Solar thermal aircraft

    Science.gov (United States)

    Bennett, Charles L.

    2007-09-18

    A solar thermal powered aircraft powered by heat energy from the sun. A heat engine, such as a Stirling engine, is carried by the aircraft body for producing power for a propulsion mechanism, such as a propeller. The heat engine has a thermal battery in thermal contact with it so that heat is supplied from the thermal battery. A solar concentrator, such as reflective parabolic trough, is movably connected to an optically transparent section of the aircraft body for receiving and concentrating solar energy from within the aircraft. Concentrated solar energy is collected by a heat collection and transport conduit, and heat transported to the thermal battery. A solar tracker includes a heliostat for determining optimal alignment with the sun, and a drive motor actuating the solar concentrator into optimal alignment with the sun based on a determination by the heliostat.

  3. Solar energy conversion

    Energy Technology Data Exchange (ETDEWEB)

    Kistler, J.

    1981-08-05

    The photovoltaic generator is the central part of all solar systems. Flat solar cells embedded in glass are preferred which can also convert diffuse solar radiation. Hybrid modules generate electrical and thermal energy simultaneously. With decreasing generator cost, the cost of energy storage becomes critical. Development activities are mostly directed on the development of stationary lead accumulator batteries and the electronic charging and protective systems. The block diagram of the current converter is presented, and applications of solar systems in domestic heating engineering, transportation technology, communications, and hydrological engineering. Solar villages are recommended which, established in bilateral cooperation with Third World authorities, may demonstrate the advantages of solar energy in heat and electric power generation.

  4. Solar panel cleaning robot

    Science.gov (United States)

    Nalladhimmu, Pavan Kumar Reddy; Priyadarshini, S.

    2018-04-01

    As the demand of electricity is increasing, there is need to using the renewable sources to produce the energy at present of power shortage, the use of solar energy could be beneficial to great extent and easy to get the maximum efficiency. There is an urgent in improving the efficiency of solar power generation. Current solar panels setups take a major power loss when unwanted obstructions cover the surface of the panels. To make solar energy more efficiency of solar array systems must be maximized efficiency evaluation of PV panels, that has been discussed with particular attention to the presence of dust on the efficiency of the PV panels have been highlighted. This paper gives the how the solar panel cleaning system works and designing of the cleaning system.

  5. Solar Renewable Energy. Teaching Unit.

    Science.gov (United States)

    Buchanan, Marion; And Others

    This unit develops the concept of solar energy as a renewable resource. It includes: (1) an introductory section (developing understandings of photosynthesis and impact of solar energy); (2) information on solar energy use (including applications and geographic limitations of solar energy use); and (3) future considerations of solar energy…

  6. Bright Idea: Solar Energy Primer.

    Science.gov (United States)

    Missouri State Dept. of Natural Resources, Jefferson City.

    This booklet is intended to address questions most frequently asked about solar energy. It provides basic information and a starting point for prospective solar energy users. Information includes discussion of solar space heating, solar water heating, and solar greenhouses. (Author/RE)

  7. Solar photocatalyzed process economics

    International Nuclear Information System (INIS)

    Link, H.

    1990-01-01

    This paper describes the Solar Energy Research Institute (SERI) cost estimates for solar water detoxification systems based on the best available information as of October 1990. Comparative costs are also provided for competitive conventional technologies which are presently applied in the water detoxification market. Although costs for solar photocatalytic systems are presently higher than those of competitive technologies, cost and performance improvements should lead to cost competitiveness by 1995

  8. Solar energy emplacement developer

    Science.gov (United States)

    Mortensen, Michael; Sauls, Bob

    1991-01-01

    A preliminary design was developed for a Lunar Power System (LPS) composed of photovoltaic arrays and microwave reflectors fabricated from lunar materials. The LPS will collect solar energy on the surface of the Moon, transform it into microwave energy, and beam it back to Earth where it will be converted into usable energy. The Solar Energy Emplacement Developer (SEED) proposed will use a similar sort of solar energy collection and dispersement to power the systems that will construct the LPS.

  9. Solar power in Finland

    International Nuclear Information System (INIS)

    Vesa, A.M.

    2004-01-01

    Solar cells, or photovoltaic units, have provided a useful supply of energy for low-power, non-gridconnected applications in Finland for some years. Applications have included navigational buoys, base stations for mobile phone networks, and appliances in holiday homes. Solar-powered systems have also been used in connection with grid power for over a decade, in Finland and elsewhere, and have proved generally successful - and solar energy is emerging as an increasingly interesting alternative for distributed electricity generation

  10. The solar neutrino problem

    International Nuclear Information System (INIS)

    Bahcall, J.N.

    1986-01-01

    The observed capture rate for solar neutrinos in the /sup 37/Cl detector is lower than the predicted capture rate. This discrepancy between theory and observation is known as the 'solar neutrino problem.' The author reviews the basic elements in this problem: the detector efficiency, the theory of stellar (solar) evolution, the nuclear physics of energy generation, and the uncertainties in the predictions. He also answers the questions of: So What? and What Next?

  11. Solar Asset Management Software

    Energy Technology Data Exchange (ETDEWEB)

    Iverson, Aaron [Ra Power Management, Inc., Oakland, CA (United States); Zviagin, George [Ra Power Management, Inc., Oakland, CA (United States)

    2016-09-30

    Ra Power Management (RPM) has developed a cloud based software platform that manages the financial and operational functions of third party financed solar projects throughout their lifecycle. RPM’s software streamlines and automates the sales, financing, and management of a portfolio of solar assets. The software helps solar developers automate the most difficult aspects of asset management, leading to increased transparency, efficiency, and reduction in human error. More importantly, our platform will help developers save money by improving their operating margins.

  12. Profile in solar

    International Nuclear Information System (INIS)

    Cohen, S.; Woods, A.

    1991-01-01

    This article reviews an innovative solar hot water heater and its inventor/entrepreneur. It includes the inventor's strategy for developing and marketing the product and his ideas on the state of the solar industry in general. There is a brief description of the solar water heater which has as prominent features its skylight-like appearance, resistance to freeze damage, simplicity and low cost

  13. A Shocking Solar Nebula?

    OpenAIRE

    Liffman, Kurt

    2009-01-01

    It has been suggested that shock waves in the solar nebula formed the high temperature materials observed in meteorites and comets. It is shown that the temperatures at the inner rim of the solar nebula could have been high enough over a sufficient length of time to produce chondrules, CAIs, refractory dust grains and other high-temperature materials observed in comets and meteorites. The solar bipolar jet flow may have produced an enrichment of 16O in the solar nebula over time and the chond...

  14. Solar thermal barometer

    International Nuclear Information System (INIS)

    Anon.

    2004-01-01

    After the bad year of 2002, the european solar thermal market returned to double-digit growth rate in 2003: 22%. Nevertheless, the sector still has not recovered the growth rate it had in the early 2000 and European Commission targets are still far from being reached. This paper presents the thermal solar industry barometer. Data on the evolution of annually installed surfaces in the european union since 1993, the cumulated capacity of thermal collectors installed in the European Union, the estimation of the annual energy production associated to european solar thermal capacities and the main companies of the European Union thermal solar sector are presented and discussed. (A.L.B.)

  15. Rectenna solar cells

    CERN Document Server

    Moddel, Garret

    2013-01-01

    Rectenna Solar Cells discusses antenna-coupled diode solar cells, an emerging technology that has the potential to provide ultra-high efficiency, low-cost solar energy conversion. This book will provide an overview of solar rectennas, and provide thorough descriptions of the two main components: the diode, and the optical antenna. The editors discuss the science, design, modeling, and manufacturing of the antennas coupled with the diodes. The book will provide concepts to understanding the challenges, fabrication technologies, and materials required to develop rectenna structures. Written by e

  16. Solar neutrino experiments

    International Nuclear Information System (INIS)

    Hampel, W.

    1996-01-01

    The present status of experimental solar neutrino research is reviewed. Updated results from the Homestake, Kamiokande, GALLEX and SAGE detectors all show a deficit when compared to recent standard solar model calculations. Two of these detectors, GALLEX and SAGE, have recently been checked with artificial 51 Cr neutrino sources. It is shown that astrophysical scenarios to solve the solar neutrino problems are not favoured by the data. There is hope that the results of forthcoming solar neutrino experiments can provide the answers to the open questions. (author) 6 figs., 3 tabs., 36 refs

  17. Solar Hydrogen Reaching Maturity

    Directory of Open Access Journals (Sweden)

    Rongé Jan

    2015-09-01

    Full Text Available Increasingly vast research efforts are devoted to the development of materials and processes for solar hydrogen production by light-driven dissociation of water into oxygen and hydrogen. Storage of solar energy in chemical bonds resolves the issues associated with the intermittent nature of sunlight, by decoupling energy generation and consumption. This paper investigates recent advances and prospects in solar hydrogen processes that are reaching market readiness. Future energy scenarios involving solar hydrogen are proposed and a case is made for systems producing hydrogen from water vapor present in air, supported by advanced modeling.

  18. The inconstant solar constant

    International Nuclear Information System (INIS)

    Willson, R.C.; Hudson, H.

    1984-01-01

    The Active Cavity Radiometer Irradiance Monitor (ACRIM) of the Solar Maximum Mission satellite measures the radiant power emitted by the sun in the direction of the earth and has worked flawlessly since 1980. The main motivation for ACRIM's use to measure the solar constant is the determination of the extent to which this quantity's variations affect earth weather and climate. Data from the solar minimum of 1986-1987 is eagerly anticipated, with a view to the possible presence of a solar cycle variation in addition to that caused directly by sunspots

  19. CERN... Solar Style

    CERN Multimedia

    2001-01-01

    Inventor William van Sprolant presenting the Solar Club's latest invention, the solar fountain. The CERN Solar Club is giving new meaning to the phrase 'fun in the sun' with their most recently developed contraption, the Solar Fountain. The Fountain was presented to the public just outside of Restaurant 1 on Wednesday October, 17th and uses solar energy to run a water pump at its base to propel a golden plastic ball up into the air. As lovely as the fountain is, the funny thing about it is that the height of the water jet and the ball are an artistic method of measuring the amount of solar power being captured by the photovoltaique panel (no batteries included). The day it was presented started out cloudy, but as the afternoon wore on, the weather brightened and the fountain jumped to life. William van Sprolant, the Solar Fountain's inventor, had great fun with the fountain in front of a group of visiting children swiveling the solar panel in multiple directions. 'Everyone who installs solar panels worrie...

  20. Solar Stereoscopy and Tomography

    Directory of Open Access Journals (Sweden)

    Markus J. Aschwanden

    2011-10-01

    Full Text Available We review stereoscopic and tomographic methods used in the solar corona, including ground-based and space-based measurements, using solar rotation or multiple spacecraft vantage points, in particular from the STEREO mission during 2007--2010. Stereoscopic and tomographic observations in the solar corona include large-scale structures, streamers, active regions, coronal loops, loop oscillations, acoustic waves in loops, erupting filaments and prominences, bright points, jets, plumes, flares, CME source regions, and CME-triggered global coronal waves. Applications in the solar interior (helioseismic tomography and reconstruction and tracking of CMEs from the outer corona and into the heliosphere (interplanetary CMEs are not included.

  1. Solar Cooker Technological Change

    DEFF Research Database (Denmark)

    Ahmad, Bashir

    1997-01-01

    The challenges which solar cooking technology is facing right now is discussed. Based on a field study in Madras and Gujarat, it is asserted that there is an important incompatibility between the technology and the every day real-life conditions of the "users" of solar cooker. An evaluation report...... on a solar cooker technology in Burkina Faso supports the findings of the study. It is concluded that the users and other important actors have to be incorporated in the technological development process of solar cookers in the future....

  2. Harnessing solar heat

    CERN Document Server

    Norton, Brian

    2013-01-01

    Systems engineered by man to harness solar heat in a controlled manner now include a diverse range of technologies each serving distinctive needs in particular climate contexts. This text covers the breadth of solar energy technologies for the conversion of solar energy to provide heat, either as the directly-used output or as an intermediary to other uses such as power generation or cooling. It is a wholly updated, extended and revised version of “Solar Energy Thermal Technology” first published in 1992. The text draws on the own author’s research and that of numerous colleagues and

  3. Solar thermal in France

    International Nuclear Information System (INIS)

    Letz, T.

    2006-01-01

    This article gives details of Plan Soleil established in 2000 by the French Agency for Environment and Energy Management and its identification of solar hot water systems and combined domestic solar hot water and space heating as promising sectors for development. The setting up of a support scheme for investment by Plan Soleil is discussed along with subsidies and grants, manufacturers and importers, the guarantee of solar results, and the quality of plants, components, and installers. The costs of thermal solar equipment, and results of the French assessment programme are considered. The need for quality standards is stressed

  4. Solar energy storage

    CERN Document Server

    Sorensen, Bent

    2015-01-01

    While solar is the fastest-growing energy source in the world, key concerns around solar power's inherent variability threaten to de-rail that scale-up . Currently, integration of intermittent solar resources into the grid creates added complication to load management, leading some utilities to reject it altogether, while other operators may penalize the producers via rate increases or force solar developers to include storage devices on-site to smooth out power delivery at the point of production. However these efforts at mitigation unfold, it is increasingly clear to parties on all sides th

  5. Solar neutrino experiments

    Energy Technology Data Exchange (ETDEWEB)

    Hampel, W [Max-Planck-Institut fuer Kernphysik, Heidelberg (Germany)

    1996-11-01

    The present status of experimental solar neutrino research is reviewed. Updated results from the Homestake, Kamiokande, GALLEX and SAGE detectors all show a deficit when compared to recent standard solar model calculations. Two of these detectors, GALLEX and SAGE, have recently been checked with artificial {sup 51}Cr neutrino sources. It is shown that astrophysical scenarios to solve the solar neutrino problems are not favoured by the data. There is hope that the results of forthcoming solar neutrino experiments can provide the answers to the open questions. (author) 6 figs., 3 tabs., 36 refs.

  6. Long Island Solar Farm

    Energy Technology Data Exchange (ETDEWEB)

    Anders, R.

    2013-05-01

    The Long Island Solar Farm (LISF) is a remarkable success story, whereby very different interest groups found a way to capitalize on unusual circumstances to develop a mutually beneficial source of renewable energy. The uniqueness of the circumstances that were necessary to develop the Long Island Solar Farm make it very difficult to replicate. The project is, however, an unparalleled resource for solar energy research, which will greatly inform large-scale PV solar development in the East. Lastly, the LISF is a superb model for the process by which the project developed and the innovation and leadership shown by the different players.

  7. Solar and interplanetary disturbances

    CERN Document Server

    Alurkar, S K

    1997-01-01

    Over the last three decades, a spate of solar wind observations have been made with sophisticated ground-based and space-borne instruments. Two highly successful space missions of the Skylab and the twin spacecraft Helios 1 and 2 have amassed an invaluable wealth of information on the large scale structure of the inner heliosphere, the solar and interplanetary magnetic field, coronal holes, interplanetary dust, solar windflows, etc.Solar and interplanetary propagating phenomena have been extensively studied during the last two decades. Very recently, a new simple model based on results from a

  8. Passive solar technology

    Energy Technology Data Exchange (ETDEWEB)

    Watson, D

    1981-04-01

    The present status of passive solar technology is summarized, including passive solar heating, cooling and daylighting. The key roles of the passive solar system designer and of innovation in the building industry are described. After definitions of passive design and a summary of passive design principles are given, performance and costs of passive solar technology are discussed. Passive energy design concepts or methods are then considered in the context of the overall process by which building decisions are made to achieve the integration of new techniques into conventional design. (LEW).

  9. Solar shading how to integrate solar shading in sustainable buildings

    CERN Document Server

    Dolmans, Dick; Dutoo, Gonzague; Hall, Anders; Seppänen, Olli

    2010-01-01

    Solar Shading Guidebook gives a solid background on the physics of solar radiation and its behaviour in window with solar shading systems. Major focus of the Guidebook is on the effect of solar shading in the use of energy for cooling, heating and lighting. The book gives also practical guidance for selection, installation and operation of solar shading as well as future trends in integration of HVAC-systems with solar control.

  10. Procedimiento para la gestión de mantenimiento utilizando herramientas de la cuarta generación

    Directory of Open Access Journals (Sweden)

    Aracelis Barrios

    2013-01-01

    Full Text Available El presente artículo presenta el diseño de un procedimiento para una gestión de mantenimiento sistémico, utilizando un conjunto de herramientas, que enfocan el uso de los recursos de la empresa asociados con las Personas, los Procesos y la Tecnología, orientados a mejorar la productividad, la toma de decisiones acertadas y a maximizar el rendimiento de los equipos, considerando entre otros, los factores de Confiabilidad, Mantenibilidad, Seguridad, Calidad y Medio Ambiente. El desarrollo del procedimiento permite utilizar de manera sistémica, la información obtenida al aplicar el mantenimiento productivo total (TPM, el análisis de modo y efectos de las fallas del mantenimiento centrado en confiabilidad (RCM, para evaluar los riesgos causados por las fallas en los equipos mediante la aplicación de la Lógica Difusa.

  11. Interfaz Gráfica Computacional para Destilación Multicomponente utilizando Métodos Cortos

    OpenAIRE

    A. Osorio Mirón; Gloria Dominguez Hernández

    2011-01-01

    En este trabajo, se elaboró una interfaz gráfica que determina por medio de simulación en estado estacionario el número de platos necesarios en el proceso de destilación multicomponente, así como la composición en el flujo de destilado y fondos de una torre de destilación utilizando métodos cortos. La interfaz gráfica de usuario, se construyó en el lenguaje de programación Python 2.5, permite presentar los datos de entrada y salida para el caso de columnas de destilación operando en régimen p...

  12. Una mejora a la clasificación basada en la medida calidad de la similaridad utilizando relaciones borrosas

    Directory of Open Access Journals (Sweden)

    Yumilka B. Fernández-Hernández

    2015-01-01

    Full Text Available El aprendizaje de reglas de clasificación es un problema clásic o del aprendizaje automático. El algoritmo IRBASIR para la ind ucción de reglas de clasificación basado en relaciones de similaridad per mite descubrir conocimiento a partir de sistemas de decisión qu e contienen rasgos tanto discretos como con tinuos. El mismo ha mostrado obt ener resultados superiores a otro s algoritmos conocidos en este tema. En este artículo se proponen varias modificaciones a este algoritm o basadas en la Teoría de los Conjuntos Borrosos, debido a las ventajas que estos poseen, teniendo en cuenta la medida calidad de similarid ad. Los resultados experimentales muestran que utilizando la Te oría de los Conjuntos Borrosos se obtienen resultados estadísticamente supe riores al algor itmo original.

  13. Desenvolvimento de massas alimenticias instantaneas de arroz, pelo processo de extrusão termoplastica, utilizando farinhas quimicamente modificadas

    OpenAIRE

    Elizabeth Harumi Nabeshima

    2007-01-01

    Resumo: Esta pesquisa consistiu em apresentar uma alternativa de utilização da farinha de arroz através da modificação química (fosfatação ou acetilação), agregando-lhe valor e possibilitando ampliar sua utilização como ingrediente alimentício, especialmente na produção de massas alimentícias instantâneas sem glúten. Inicialmente a farinha de arroz foi modificada quimicamente, sendo acetilada ou fosfatada, utilizando-se anidrido acético (0,465; 1,500; 4,000; 6,500 e 7,535g/100g farinha) ou ox...

  14. Producão de goma xantana por X. Campestris ATCC 13951 utilizando soro de queijo desproteinado

    Directory of Open Access Journals (Sweden)

    Jenny Sobenes G.

    2015-12-01

    Full Text Available A goma xantana é um biopolímero microbiano producido pela bactéria Xanthomonas. O presente trabalho teve como objetivo estudar a produção de goma xantana por processo fermentativo utilizando a linhagem X. campestris ATCC 13951 e como fonte de carbono: soro de queijo desproteinado suplementado com extrato de levedura e sulfato de amônia como fontes de nitrogênio; soro de queijo desproteinado suplementado só com extrato de levedura como fonte de nitrogênio e só soro de queijo desproteinado sem suplementos, tempo de fermentação de 72h para os três meios. Dos meios em análise aquele constituido apenas por soro de queijo desproteinado, atingiu o maior rendimento com valor de 58% e a melhor qualidade de goma.

  15. Parameterization models for solar radiation and solar technology applications

    International Nuclear Information System (INIS)

    Khalil, Samy A.

    2008-01-01

    Solar radiation is very important for the evaluation and wide use of solar renewable energy systems. The development of calibration procedures for broadband solar radiation photometric instrumentation and the improvement of broadband solar radiation measurement accuracy have been done. An improved diffuse sky reference and photometric calibration and characterization software for outdoor pyranometer calibrations are outlined. Parameterizations for direct beam, total hemispherical and diffuse sky radiation and solar radiation technology are briefly reviewed. The uncertainties for various broadband solar radiations of solar energy and atmospheric effects are discussed. The varying responsivities of solar radiation with meteorological, statistical and climatological parameters and possibility atmospheric conditions was examined

  16. Parameterization models for solar radiation and solar technology applications

    Energy Technology Data Exchange (ETDEWEB)

    Khalil, Samy A. [National Research Institute of Astronomy and Geophysics, Solar and Space Department, Marsed Street, Helwan, 11421 Cairo (Egypt)

    2008-08-15

    Solar radiation is very important for the evaluation and wide use of solar renewable energy systems. The development of calibration procedures for broadband solar radiation photometric instrumentation and the improvement of broadband solar radiation measurement accuracy have been done. An improved diffuse sky reference and photometric calibration and characterization software for outdoor pyranometer calibrations are outlined. Parameterizations for direct beam, total hemispherical and diffuse sky radiation and solar radiation technology are briefly reviewed. The uncertainties for various broadband solar radiations of solar energy and atmospheric effects are discussed. The varying responsivities of solar radiation with meteorological, statistical and climatological parameters and possibility atmospheric conditions was examined. (author)

  17. Surface Meteorology and Solar Energy

    Data.gov (United States)

    National Aeronautics and Space Administration — Surface Meteorology and Solar Energy data - over 200 satellite-derived meteorology and solar energy parameters, monthly averaged from 22 years of data, global solar...

  18. Make Your Own Solar Panel.

    Science.gov (United States)

    Suzuki, David

    1992-01-01

    Presents an activity in which students make a simulated solar panel to learn about the principles behind energy production using solar panels. Provides information about how solar panels function to produce energy. (MCO)

  19. Solar: California, not dreaming

    Energy Technology Data Exchange (ETDEWEB)

    Jones, J.

    2006-03-15

    The California Solar Initiative (CSI) was approved by the California Public Utilities Commission (PUC) in January 2006. The CSI is the largest solar programme of this kind ever in the USA and provides for $3.2 billion in incentives for solar projects between 2007 and 2017. The PUC will oversee a $2.5 billion programme to provide funding for solar installations on commercial and existing residential buildings, while the California Energy Commission (CEC) will manage a separate $350 million fund targeted at new residential building. Existing solar programmes operated by the PUC and CEC will be consolidated into the CSI. The CEC programme will use already allocated funding, but the PUC programme will be funded through revenues collected from customers of the main gas and electric utilities in California. Funds will be distributed via rebates to householders or companies that install solar. As well as solar photovoltaics (PV), rebates will also go to solar thermal power (concentrating solar power) and solar heating and cooling. CSI funding can be used in combination with existing federal tax credits. The aim is a gradual increase from installation of 40 MW of PV in 2005 to 100 MW by 2009. The CSI is also expected to create favourable market conditions for PV manufacturers in California and to encourage investment in production of solar-grade silicon in or near California. Objections from the International Brotherhood of Electrical Workers (IBEW) appear to have been overcome but a number of other potential snags remain. CSI is expected to be replicated in other US states.

  20. Gestión Tributaria utilizando metodología de problemas (ABP) 2. Sesión Vídeo 2/2

    OpenAIRE

    Bonet, Pilar

    2009-01-01

    Clase de Derecho Financiero y Tributario I, Grupo 4B de ADE-Derecho, 4 marzo 2009, profa. Pilar Bonet: Gestión Tributaria, utilizando metodología de problemas (ABP), 2. sesión. Facultat de Dret Universitat de ValènciaDuración: 41M

  1. Gestión Tributaria, utilizando metodología de problemas (ABP) 2. Sesión Vídeo 1/2

    OpenAIRE

    Bonet, Pilar

    2009-01-01

    Clase de Derecho Financiero y Tributario I, Grupo 4B de ADE-Derecho, 4 marzo 2009, profa. Pilar Bonet: Gestión Tributaria, utilizando metodología de problemas (ABP), 2. sesión. Facultat de Dret Universitat de ValènciaDuración: 1H 19M

  2. The solarPACES strategy for the solar thermal breakthrough

    International Nuclear Information System (INIS)

    Burch, G.D.; Grasse, W.

    1997-01-01

    IEA(International Energy Agency)/SolarPACES(Solar Power and Chemical Energy systems)represents a world wide coalition for information sharing and collaboration on applications of concentrated solar energy. The current SolarPACES community has built up solar thermal system know-how over 15 years, is operating the three main solar test centres in the world. Its main activities are in the following four fields: solar thermal electric power systems, solar chemistry, solar technology and advanced applications and non-technical activities. The article presents the talk on the strategy of solarPACES given at the International Workshop on applied solar energy held in Tashkent(Uzbekistan) in June 1997. (A.A.D.)

  3. Solar air conditioning. Dresden colloquium; Solare Klimatisierung. Dresdner Kolloquium

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    Subjects: R + D activities in solar air conditioning; dessicative and evaporative cooling (DEC) - systems and components; Chances of solar air conditioning in Europe; Practical experience with solar-assisted air conditioning; Performance of a solar system at Lissabon; DEC system in the Alsenblock building, Berlin; Does solar air conditioning require specially designed buildings; Performance of solar heated adsorption refrigerators; Low-capacity absacity absorption systems for solar air conditioning. [German] Die Kolloquiumsschrift beinhaltet Unterlagen ueber die abgehandelten Themen. Sie lauten: F and E-Aktivitaeten im Bereich Solare Klimatisierung; SGK(DEC-Technik) - ausgefuehrte Anlagen und deren Komponenten; Chancen der solaren Klimatisierung in Europa; Erfahrungen mit der solarunterstuetzten Klimatisierung; Energieverbrauch und Regelung von SGK-Anlagen; Betriebserfahrungen einer Solaranlage in Lissabon; Realisierung der SGK im Alsenblock Berlin; Erfordert die solare Klimatisierung besondere Gebaeude?; Betriebserfahrungen mit solar beheizten Adsorptionskaeltemaschinen; Absorptionsanlagen kleiner Leistung fuer solare Klimatisierung. (orig.)

  4. Solar absorption cooling

    NARCIS (Netherlands)

    Kim, D.S.

    2007-01-01

    As the world concerns more and more on global climate changes and depleting energy resources, solar cooling technology receives increasing interests from the public as an environment-friendly and sustainable alternative. However, making a competitive solar cooling machine for the market still

  5. The lower solar atmosphere

    NARCIS (Netherlands)

    Rutten, R.J.

    1998-01-01

    This "rapporteur" report discusses the solar photosphere and low chromosphere in the context of chemical composition studies. The highly dynamical nature of the photosphere does not seem to jeopardize precise determination of solar abundances in classical fashion. It is still an open question how

  6. Solar Energy: Heat Storage.

    Science.gov (United States)

    Knapp, Henry H., III

    This module on heat storage is one of six in a series intended for use as supplements to currently available materials on solar energy and energy conservation. Together with the recommended texts and references (sources are identified), these modules provide an effective introduction to energy conservation and solar energy technologies. The module…

  7. Priority to solar energy

    International Nuclear Information System (INIS)

    Berner, Joachim

    2011-01-01

    There are many different combinations of solar heating systems and heat pumps in the market; some of them differ considerably in terms of the design concept, control management and storage technology. One thing they all have in common is that solar heating comes first.

  8. Solar thermal power plants

    International Nuclear Information System (INIS)

    Schnatbaum, L.

    2009-01-01

    The solar thermal power plant technology, the opportunities it presents and the developments in the market are outlined. The focus is on the technology of parabolic trough power plants, a proven technology for solar power generation on a large scale. In a parabolic trough power plant, trough-shaped mirrors concentrate the solar irradiation onto a pipe in the focal line of the collector. The thermal energy thus generated is used for electricity generation in a steam turbine. Parabolic trough plants can be combined with thermal storage and fossil or biomass fired heat exchangers to generate electricity even when the sun is not shining. Solar Millennium AG in Erlangen has developed the first power plant of this kind in Europe. After two years of construction the plant started operation in Southern Spain in 2008. This one and its sister projects are important steps leading the way for the whole market. The paper also covers the technological challenges, the key components used and the research and development activities concerning this technology. Solar thermal power plants are ideal for covering peak and medium loads in power grids. In hybrid operation they can also cover base-load. The Solar Chimney power plant, another striking technology for the conversion of solar into electric energy, is described briefly. The paper concludes with a look at the future - the import of solar energy from the deserts of North Africa to central Europe. (author)

  9. Sunmotor Solar Shack 120

    International Nuclear Information System (INIS)

    Jensen, E.

    2009-01-01

    This article described a solar pump that was developed by Alberta-based Sunmotor International Ltd. The prototype Solar Shack 120 was recently deployed in central Alberta for a remediation project for Devon Canada. The portable solar pump unit is well suited for environmental remediation in the oilpatch where conventional electricity is not available. The solar panels automatically run the pump whenever there is enough sunlight and there is liquid in the sump. Devon Canada wanted a system that continues to pump during cloudy weather to avoid the accumulation of effluent in the sump. The Solar Shack 120 delivers 120 volts of alternating current (vac) power. Solar panels are used to charge a bank of large sealed batteries that supply direct power (DC) to an inverter, which converts it into AC. A thermostat control was added to shut off the pumps in cold weather to avoid battery discharging. The Solar Shack unit has possibilities in countries with unreliable electricity supplies. It could provide a backup power supply that automatically kicks in whenever the power grid goes down. Sunmotor International Ltd. can supply complete remote power systems for both AC and DC electrical requirements. The systems are designed for each application to ensure customer satisfaction. The company is currently building a unit that integrates solar power with a generator backup, thereby eliminating the annoying noise of a continually running generator. 1 fig

  10. Solar Environmental Disturbances

    Science.gov (United States)

    2007-11-02

    Astronomische Nachrichten 324, 303-304: Design and Development of the Advanced Technology Solar Telescope Keller, C.U., Rimmele, T.R., Hill, F...Keil, S.L., Oschmann, J.M., and the ATST Team 2002, Astronomische Nachrichten 323, 294-298: The Advanced Technology Solar Telescope Mozer, J.B

  11. Solar energy in Peru

    Energy Technology Data Exchange (ETDEWEB)

    Pierson, H.

    1981-12-01

    The past, present, and future of Peru is discussed in terms of solar energy development and the social, economic, climatic, and technical factors involved. It is pointed out that there are 3 geographical divisions in Peru including: (1) the foggy coastal strip where rain is infrequent, insolation is low and population is high; (2) the mountainous Andes region with high insolation and many populated high mountain valleys; and (3) the rainy, Amazon basin covered with jungle, and sparcely populated with high but inconsistent insolation. Since there is little competition with other forms of energy, solar energy shows promise. Passive solar heating of buildings, particularly in the Andes region, is described, as well as the use of solar water heaters. Prototypes are described and illustrated. Industrial use of solar heated water in the wool industry as well as solar food drying and solar desalination are discussed. High temperature applications (electrical generators and refrigeration) as well as photovoltaic systems are discussed briefly. It is concluded that social and political factors are holding back the development of solar energy but a start (in the form of prototypes and demonstration programs) is being made. (MJJ)

  12. Solar Electricity for Homes

    Science.gov (United States)

    Roman, Harry T.

    2012-01-01

    Every day, the sun showers the Earth with millions of times more energy than its people use. The only problem is that energy is spread out over the entire Earth's surface and must be harvested. Engineers are learning to capture and use some of this energy to make electricity for homes. Solar panels make up the heart of a solar system. They can be…

  13. Solar Technology Curriculum, 1980.

    Science.gov (United States)

    Seward County Community Coll., Liberal, KS.

    This curriculum guide contains lecture outlines and handouts for training solar technicians in the installation, maintenance, and repair of solar energy hot water and space heating systems. The curriculum consists of four modular units developed to provide a model through which community colleges and area vocational/technical schools can respond…

  14. Probing the Solar Interior

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 3; Issue 3. Probing the Solar Interior Hearing the Heartbeats of the Sun. Ashok Ambastha. General ... Author Affiliations. Ashok Ambastha1. Joint In-Charge Udaipur Solar Observatory Physical Research laboratory P.O. Box No. 198 Udaipur 313 001, India ...

  15. Energetic solar particles

    International Nuclear Information System (INIS)

    Biswas, M.

    1975-01-01

    In this review, some of the important aspects of energetic solar particles and their relation to solar physics are discussed. The major aspects of solar cosmic ray studies currently under investigation are identified and attention is focussed on the problems of the physical processes in the sun which may be responsible for these phenomena. The studies of the composition and energy spectra of solar cosmic ray nuclei are related to the basic problem of particle acceleration process in sun and to the composition of elements in solar atmosphere. The composition of higher energy (>20 MeV/amu) multiply charged nuclei of He, C, N, O, Ne, Mg, Si and Fe give information on the abundance of elements in the solar atmosphere. At lower energies (approximately 1-10 MeV/amu), the abundances of these elements show enhancements relative to solar abundances and these enhancements are believed to be due to particle acceleration mechanisms operative in the sun which are not fully understood at present. Studies of the relative abundances of H 2 , H 3 and He 3 isotopes and Li, Be, B nuclei in the solar cosmic rays can also be studied. The question of the relationship of the accelerated particles in the sun to the optical flare phenomena is discussed. Further studies of different aspects of these phenomena may give important clues to a wide ranging phenomena in the active sun. The observational methods employed for these studies are mentioned. (A.K.)

  16. The Solar Energy Notebook.

    Science.gov (United States)

    Rankins, William H., III; Wilson, David A.

    This publication is a handbook for the do-it-yourselfer or anyone else interested in solar space and water heating. Described are methods for calculating sun angles, available energy, heating requirements, and solar heat storage. Also described are collector and system designs with mention of some design problems to avoid. Climatological data for…

  17. Homemade Solar Systems

    Science.gov (United States)

    1981-01-01

    Through the use of NASA Tech Briefs, Peter Kask, was able to build a solarized domestic hot water system. Also by applying NASA's solar energy design information, he was able to build a swimming pool heating system with minimal outlay for materials.

  18. Solar collector overheating protection

    NARCIS (Netherlands)

    Slaman, M.J.; Griessen, R.P.

    Prismatic structures in a thermal solar collector are used as overheating protection. Such structures reflect incoming light efficiently back whenever less thermal power is extracted from the solar collector. Maximum thermal power is generated when the prismatic structure is surrounded by a

  19. On the Solar oblateness

    International Nuclear Information System (INIS)

    Kislik, M.D.

    1983-01-01

    Limits for the magnitude of Solar oblateness under the assumption that the Sun is rotating as a rigid body with the velocity of sideric rotation of the equator points have been determined. It is demonstrated that for the present there is no necessity to take into accoUnt Solar oblateness when making the interior planets movement theories

  20. MEMS Solar Generators

    OpenAIRE

    Grbovic, Dragoslav; Osswald, Sebastian

    2011-01-01

    Approved for public release; distribution is unlimited Using MEMS bimaterial structures to build highly efficient solar energy generators. This is a novel approach that utilizes developments in the area of bimaterial sensors and applies them in the field of solar energy harvesting.

  1. The thermodynamic solar energy

    International Nuclear Information System (INIS)

    Rivoire, B.

    2002-04-01

    The thermodynamic solar energy is the technic in the whole aiming to transform the solar radiation energy in high temperature heat and then in mechanical energy by a thermodynamic cycle. These technic are most often at an experimental scale. This paper describes and analyzes the research programs developed in the advanced countries, since 1980. (A.L.B.)

  2. Solar panel foundation device

    Energy Technology Data Exchange (ETDEWEB)

    Hawley, W.W.

    1983-03-29

    A transportable solar panel foundation device which has a bottom member, at least one upstanding side member, and an essentially open top. The side members are angled to permit nesting of a plurality of the foundation devices, and reinforcement pads are carried by the foundation device to support legs for one or more solar panels.

  3. Polymer tandem solar cells

    NARCIS (Netherlands)

    Gilot, J.

    2010-01-01

    Solar cells convert solar energy directly into electricity and are attractive contribute to the increasing energy demand of modern society. Commercial mono-crystalline silicon based devices are infiltrating the energy market but their expensive, time and energy consuming production process

  4. Solar saddle bags. Solar-Fahrradpacktaschen

    Energy Technology Data Exchange (ETDEWEB)

    Willems, M

    1991-09-12

    The invention consists of the arrangement of solar cells on the upper side of saddle bags of every design (handle bar pocket, bicycle saddle bag etc.) which charge the accumulators in the pack pocket. One can drive the alternator of the bicycle, a transistor radio, a cassette tape recorder, or similar, with the power from the accumulators. The lamp and the taillight of the bicycle can still be used. The solar cells can be attached firmly to the pack pocket. However, they can also be assembled detachably, e.g. by push-buttons or zip-fasteners.

  5. The Solar Bank concept

    International Nuclear Information System (INIS)

    Eckhart, M.T.

    1999-01-01

    The Solar Bank is proposed to be established as a multinational wholesale lending institution supporting the adoption of solar photovoltaic (PV) systems by as much as 40% of the world's population. It would supply capital resources to local lending institutions such as banks, credit unions, cooperatives, and rural lending organizations in the developing countries, and to financial institutions in the developed countries. The Solar Bank is intended to be global in scope, with operations in the major countries. The Solar Bank will bring a degree of standardization to the process of making small loans to many people for the purchase of PV systems, and it will provide technical support and training to its participating financial institutions. 'Solar Bank International' is likely to be headquartered in Europe. (orig.)

  6. Meteorology ans solar physics

    Science.gov (United States)

    Schwarz, Oliver

    When in the second half of the 19th century both solar physics and astrophysics came into existence, various solar phenomena were described by analogies encountered in the terrestrial atmosphere. For a certain time, meteorology played a central role in research on solar processes. At first glance, this may appear as a curious and old-fashioned specialty. However, solar physics owes its first insights into solar structure to various analogies in terrestrial atmospheric studies. The present investigation intends to elucidate this fact, to present details of the historical development, and to demonstrate how our present knowledge in certain fields is based on considerations which were originally taken from the description of the terrestrial atmosphere.

  7. A Little Solar Story

    DEFF Research Database (Denmark)

    Ahmad, Bashir

    1997-01-01

    Experiences from use of solar cookers in India and many other places are different. But the story which is based on a field study in Gujarat state of India shows that during last twenty years there has been a tendency that many families do not continue to use their solar cookers. The study shows...... that the tendency is related with the lack of compatibility of this new technology (solar cooker) with the everyday real-life conditions of the families. In principle the findings are supported by an evaluation report on a solar cooker project in Burkina Faso. The conclusion is that the user should be involved...... in the solar cooker technological development process....

  8. Solar combi systems

    DEFF Research Database (Denmark)

    Andersen, Elsa

    2007-01-01

    The focus in the present Ph.D. thesis is on the active use of solar energy for domestic hot water and space heating in so-called solar combi systems. Most efforts have been put into detailed investigations on the design of solar combi systems and on devices used for building up thermal...... the thermal behaviour of different components, and the theoretical investigations are used to study the influence of the thermal behaviour on the yearly thermal performance of solar combi systems. The experimental investigations imply detailed temperature measurements and flow visualization with the Particle...... Image Velocimetry measurement method. The theoretical investigations are based on the transient simulation program TrnSys and Computational Fluid Dynamics. The Ph.D. thesis demonstrates the influence on the thermal performance of solar combi systems of a number of different parameters...

  9. Solar and Hydrogen

    International Nuclear Information System (INIS)

    Kadirgan, F.; Beyhan, S.; Oezenler, S.

    2006-01-01

    It has been widely accepted that the only sustainable and environmentally friendly energy is the solar energy and hydrogen energy, which can meet the increasing energy demand in the future. Solar Energy may be used either for solar thermal or for solar electricity conversion. Solar thermal collectors represent a wide-spread type of system for the conversion of solar energy. Radiation, convection and conduction are strongly coupled energy transport mechanisms in solar collector systems. The economic viability of lower temperature applications of solar energy may be improved by increasing the quantity of usable energy delivered per unit area of collector. This can be achieved by the use of selective black coatings which have a high degree of solar absorption, maintaining high energy input to the solar system while simultaneously suppressing the emission of thermal infrared radiation. Photovoltaic solar cells and modules are produced for: (1) large scale power generation, most commonly when modules are incorporated as part of a building (building integrated photovoltaic s) but also in centralised power stations, (2) supplying power to villages and towns in developing countries that are not connected to the supply grid, e.g. for lighting and water pumping systems, (3) supplying power in remote locations, e.g. for communications or weather monitoring equipment, (4) supplying power for satellites and space vehicles, (5) supplying power for consumer products, e.g. calculators, clocks, toys and night lights. In hydrogen energy systems, Proton exchange membrane (PEMFC) fuel cells are promising candidates for applications ranging from portable power sources (battery replacement applications) to power sources for future electric vehicles because of their safety, elimination of fuel processor system, thus, simple device fabrication and low cost. Although major steps forward have been achieved in terms of PEMFC design since the onset of research in this area, further

  10. Performances of solar water pumping station with solar tracker

    International Nuclear Information System (INIS)

    Buniatyan, V.V.; Vardanyan, A.A.

    2011-01-01

    For the solar water pumping stations ? solar tracking system with phototransistor is developed. On the basis of the experimental investigations the utility and efficiency of the PV water pumping station with solar tracker under different conditions of varying solar radiation in Armenia is shown

  11. Preliminary design package for solar collector and solar pump

    Science.gov (United States)

    1978-01-01

    A solar-operated pump using an existing solar collector, for use on solar heating and cooling and hot water systems is described. Preliminary design criteria of the collector and solar-powered pump is given including: design drawings, verification plans, and hazard analysis.

  12. Solar '80s: A Teacher's Handbook for Solar Energy Education.

    Science.gov (United States)

    LaHart, David E.

    This guide is intended to assist the teacher in exploring energy issues and the technology of solar energy conversion and associated technologies. Sections of the guide include: (1) Rationale; (2) Technology Overview; (3) Sun Day Suggestions for School; (4) Backyard Solar Water Heater; (5) Solar Tea; (6) Biogas; (7) Solar Cells; (8) Economics; (9)…

  13. The Effects of Solar Irradience and Ambient Temperature on Solar ...

    African Journals Online (AJOL)

    Solar energy is abundant. It is however low grade energy and cannot be easily used in the form it occurs for work. Converting solar energy directly to electricity, using solar photovoltaic (PV) modules is however a low efficiency process. Optimizing this conversion, especially in the face of the high cost of solar panels, is thus ...

  14. Solar thermal and concentrated solar power barometer

    International Nuclear Information System (INIS)

    2013-01-01

    The European concentrated solar power plant market is steeling itself for tough time ahead. The number of projects under construction is a pittance compared with 2012 that was an excellent year for installations (an additional 802.5 MW of capacity recorded). This drop is the result of the moratorium on renewable energy power plants introduced by the Spanish government. The European solar thermal market is hardly any more encouraging . EurObserv'ER holds that it slipped for the fourth year in a row (it dropped 5.5% between 2011 and 2012). The newly-installed solar thermal collector surface area in the EU now stands at 3.4 million m 2 , far short of its 2008 installation record of 4.6 million m 2 . The EU's solar thermal base to date at the end of 2012 is 29.6 GWth with 2.4 GWth installed during the year 2012. This article gives tables gathering the figures of the production for every European country for 2012 and describes the market and the general trend for every EU member

  15. Emerging Solar Technologies: Perovskite Solar Cell

    Indian Academy of Sciences (India)

    energy technologies and ... cost-effective and feasible non-silicon solar cell technologies. ..... storing in the air for long periods, and the stability reached up to .... [12] Y Liu, L A Renna, M Bag, Z A Page, P Kim, J Choi, T Emrick, D Venkatara-.

  16. Variation of the solar wind velocity following solar flares

    International Nuclear Information System (INIS)

    Huang, Y.; Lee, Y.

    1975-01-01

    By use of the superposed epoch method, changes in the solar wind velocity following solar flares have been investigated by using the solar wind velocity data obtained by Pioneer 6 and 7 and Vela 3, 4, and 5 satellites. A significant increase of the solar wind velocity has been found on the second day following importance 3 solar flares and on the third day following importance 2 solar flares. No significant increase of the solar wind velocity has been found for limb flares. (auth)

  17. Solar maximum mission

    International Nuclear Information System (INIS)

    Ryan, J.

    1981-01-01

    By understanding the sun, astrophysicists hope to expand this knowledge to understanding other stars. To study the sun, NASA launched a satellite on February 14, 1980. The project is named the Solar Maximum Mission (SMM). The satellite conducted detailed observations of the sun in collaboration with other satellites and ground-based optical and radio observations until its failure 10 months into the mission. The main objective of the SMM was to investigate one aspect of solar activity: solar flares. A brief description of the flare mechanism is given. The SMM satellite was valuable in providing information on where and how a solar flare occurs. A sequence of photographs of a solar flare taken from SMM satellite shows how a solar flare develops in a particular layer of the solar atmosphere. Two flares especially suitable for detailed observations by a joint effort occurred on April 30 and May 21 of 1980. These flares and observations of the flares are discussed. Also discussed are significant discoveries made by individual experiments

  18. Solar Hot Water Heater

    Science.gov (United States)

    1978-01-01

    The solar panels pictured below, mounted on a Moscow, Idaho home, are part of a domestic hot water heating system capable of providing up to 100 percent of home or small business hot water needs. Produced by Lennox Industries Inc., Marshalltown, Iowa, the panels are commercial versions of a collector co-developed by NASA. In an effort to conserve energy, NASA has installed solar collectors at a number of its own facilities and is conducting research to develop the most efficient systems. Lewis Research Center teamed with Honeywell Inc., Minneapolis, Minnesota to develop the flat plate collector shown. Key to the collector's efficiency is black chrome coating on the plate developed for use on spacecraft solar cells, the coating prevents sun heat from "reradiating," or escaping outward. The design proved the most effective heat absorber among 23 different types of collectors evaluated in a Lewis test program. The Lennox solar domestic hot water heating system has three main components: the array of collectors, a "solar module" (blue unit pictured) and a conventional water heater. A fluid-ethylene glycol and water-is circulated through the collectors to absorb solar heat. The fluid is then piped to a double-walled jacket around a water tank within the solar module.

  19. Solar weather monitoring

    Directory of Open Access Journals (Sweden)

    J.-F. Hochedez

    2005-11-01

    Full Text Available Space Weather nowcasting and forecasting require solar observations because geoeffective disturbances can arise from three types of solar phenomena: coronal mass ejections (CMEs, flares and coronal holes. For each, we discuss their definition and review their precursors in terms of remote sensing and in-situ observations. The objectives of Space Weather require some specific instrumental features, which we list using the experience gained from the daily operations of the Solar Influences Data analysis Centre (SIDC at the Royal Observatory of Belgium. Nowcasting requires real-time monitoring to assess quickly and reliably the severity of any potentially geoeffective solar event. Both research and forecasting could incorporate more observations in order to feed case studies and data assimilation respectively. Numerical models will result in better predictions of geomagnetic storms and solar energetic particle (SEP events. We review the data types available to monitor solar activity and interplanetary conditions. They come from space missions and ground observatories and range from sequences of dopplergrams, magnetograms, white-light, chromospheric, coronal, coronagraphic and radio images, to irradiance and in-situ time-series. Their role is summarized together with indications about current and future solar monitoring instruments.

  20. Understanding Solar Cycle Variability

    Energy Technology Data Exchange (ETDEWEB)

    Cameron, R. H.; Schüssler, M., E-mail: cameron@mps.mpg.de [Max-Planck-Institut für Sonnensystemforschung, Justus-von-Liebig-Weg 3, D-37077 Göttingen (Germany)

    2017-07-10

    The level of solar magnetic activity, as exemplified by the number of sunspots and by energetic events in the corona, varies on a wide range of timescales. Most prominent is the 11-year solar cycle, which is significantly modulated on longer timescales. Drawing from dynamo theory, together with the empirical results of past solar activity and similar phenomena for solar-like stars, we show that the variability of the solar cycle can be essentially understood in terms of a weakly nonlinear limit cycle affected by random noise. In contrast to ad hoc “toy models” for the solar cycle, this leads to a generic normal-form model, whose parameters are all constrained by observations. The model reproduces the characteristics of the variable solar activity on timescales between decades and millennia, including the occurrence and statistics of extended periods of very low activity (grand minima). Comparison with results obtained with a Babcock–Leighton-type dynamo model confirm the validity of the normal-mode approach.

  1. Quantum dot solar cells

    CERN Document Server

    Wu, Jiang

    2013-01-01

    The third generation of solar cells includes those based on semiconductor quantum dots. This sophisticated technology applies nanotechnology and quantum mechanics theory to enhance the performance of ordinary solar cells. Although a practical application of quantum dot solar cells has yet to be achieved, a large number of theoretical calculations and experimental studies have confirmed the potential for meeting the requirement for ultra-high conversion efficiency. In this book, high-profile scientists have contributed tutorial chapters that outline the methods used in and the results of variou

  2. Exploring the solar system

    CERN Document Server

    Bond, Peter

    2012-01-01

    The exploration of our solar system is one of humanity's greatest scientific achievements. The last fifty years in particular have seen huge steps forward in our understanding of the planets, the sun, and other objects in the solar system. Whilst planetary science is now a mature discipline - involving geoscientists, astronomers, physicists, and others - many profound mysteries remain, and there is indeed still the tantalizing possibility that we may find evidence of life on another planet in our system.Drawing upon the latest results from the second golden age of Solar System exploration, aut

  3. Dye Sensitized Solar Cells

    Directory of Open Access Journals (Sweden)

    Di Wei

    2010-03-01

    Full Text Available Dye sensitized solar cell (DSSC is the only solar cell that can offer both the flexibility and transparency. Its efficiency is comparable to amorphous silicon solar cells but with a much lower cost. This review not only covers the fundamentals of DSSC but also the related cutting-edge research and its development for industrial applications. Most recent research topics on DSSC, for example, applications of nanostructured TiO2, ZnO electrodes, ionic liquid electrolytes, carbon nanotubes, graphene and solid state DSSC have all been included and discussed.

  4. Solar Water Heater

    Science.gov (United States)

    1993-01-01

    As a Jet Propulsion Laboratory (JPL) scientist Dr. Eldon Haines studied the solar energy source and solar water heating. He concluded he could build a superior solar water heating system using the geyser pumping principle. He resigned from JPL to develop his system and later form Sage Advance Corporation to market the technology. Haines' Copper Cricket residential system has no moving parts, is immune to freeze damage, needs no roof-mounted tanks, and features low maintenance. It provides 50-90 percent of average hot water requirements. A larger system, the Copper Dragon, has been developed for commercial installations.

  5. Iron sulphide solar cells

    Science.gov (United States)

    Ennaoui, A.; Tributsch, H.

    1984-12-01

    The abundant, naturally occurring natural compound pyrite (FeS2) can be used as a semiconducting material for photoelectrochemical and photovoltaic solar cells. Unlike most of the intensively studied photoactive materials, pyrite solar cell production would never be limited by the availability of the elements or by their compatibility with the environment. An energy gap of 0.95 eV has been determined for pyrite, and it is noted that the theoretical efficiency limit for solar energy conversion in this material is of the order of 15-20 percent.

  6. Solar Energy Demonstrations

    Science.gov (United States)

    1979-01-01

    Solar energy furnishes all of the heating and hot water needs, plus 80 percent of the air conditioning, for the two-story Reedy Creek building. A unique feature of this installation is that the 16 semi-cylindrical solar collectors (center photo on opposite page with closeup of a single collector below it) are not mounted atop the roof as is customary, they actually are the roof. This arrangement eliminates the usual trusses, corrugated decking and insulating concrete in roof construction; that, in turn, reduces overall building costs and makes the solar installation more attractive economically. The Reedy Creek collectors were designed and manufactured by AAI Corporation of Baltimore, Maryland.

  7. Solar powered Stirling engine

    Energy Technology Data Exchange (ETDEWEB)

    Meijer, R.J.

    1987-11-24

    In a solar dish module which comprises a dish which receives incident solar rays and reflects them to a focus at which is located the combination of a receiver and a heat engine organized and arranged so that the heat energy of the reflected solar rays collected at the receiver powers the engine, and wherein the receiver and heat engine are supported from the dish by a framework, the improvement is described which comprises journal means for journaling at least the engine on the framework to maintain certain predetermined spatial orientation for the engine in relation to the direction of gravity irrespective of spatial orientation of the dish.

  8. Solar Technician Program Blows Hot

    Science.gov (United States)

    Ziegler, Peg Moran

    1977-01-01

    A training program for solar heating technicians was initiated at Sonoma State College's School of Environmental Studies for CETA applicants. Among the projects designed and built were a solar alternative energy center, a solar hot water system, and a solar greenhouse. (MF)

  9. Four-cell solar tracker

    Science.gov (United States)

    Berdahl, C. M.

    1981-01-01

    Forty cm Sun tracker, consisting of optical telescope and four solar cells, stays pointed at Sun throughout day for maximum energy collection. Each solar cell generates voltage proportional to part of solar image it receives; voltages drive servomotors that keep image centered. Mirrored portion of cylinder extends acquisition angle of device by reflecting Sun image back onto solar cells.

  10. Solar Photovoltaic Technology Basics | NREL

    Science.gov (United States)

    Photovoltaic Technology Basics Solar Photovoltaic Technology Basics Solar cells, also called found in sand) created an electric charge when exposed to sunlight. Soon solar cells were being used to power space satellites and smaller items like calculators and watches. Photo of a large silicon solar

  11. Pyramid solar micro-grid

    Science.gov (United States)

    Huang, Bin-Juine; Hsu, Po-Chien; Wang, Yi-Hung; Tang, Tzu-Chiao; Wang, Jia-Wei; Dong, Xin-Hong; Hsu, Hsin-Yi; Li, Kang; Lee, Kung-Yen

    2018-03-01

    A novel pyramid solar micro-grid is proposed in the present study. All the members within the micro-grid can mutually share excess solar PV power each other through a binary-connection hierarchy. The test results of a 2+2 pyramid solar micro-grid consisting of 4 individual solar PV systems for self-consumption are reported.

  12. Paralelización del Algoritmo Expectación–Maximización Utilizando OpenCL

    Directory of Open Access Journals (Sweden)

    Ernesto Insua-Suárez

    2014-12-01

    Full Text Available Actualmente, las organizaciones y empresas almacenan grandes volúmenes de datos para lograr sus propósitos. Una de las variantes para obtener información valiosa consiste en el empleo de la Minería de datos. Dentro de esta, existen diferentes tareas, una de ellas es el agrupamiento. En esta tarea los datos se agrupan según sus semejanzas entre si y diferencias con elementos de otros grupos. Dentro de los algoritmos que realizan estos agrupamientos se encuentra Expectación-Maximización, el cual presenta elevados tiempos de ejecución en la medida que aumenta el tamaño de los datos. En el presente artículo se discute acerca de la paralelización del algoritmo, utilizando técnicas de programación paralela. El diseño del algoritmo propuesto se basa en el uso de las tarjetas de procesamiento gráfico, GPU. OpenCL, lenguaje empleado para la programación en arquitecturas híbridas, permite aprovechar las arquitecturas de hardware disponibles, con lo que se logra disminuir el tiempo de ejecución de la implementación realizada. La razón principal por lo cual es posible mejorar este tiempo se debe a la cantidad de procesos paralelos que se pueden lanzar en hilos de procesamientos independientes. Para el logro de los resultados descritos se integran conocimientos del campo de la Minería de datos y la Computación Paralela y Distribuida. Como parte de esta investigación, se realizó una implementación del algoritmo utilizando las bibliotecas de OpenCL, para disminuir su tiempo de ejecución. La implementación logra disminuir en un 82% la implementación secuencial. Esto significa que el algoritmo paralelo se ejecuta 5,5 veces más rápido que su correspondiente implementación secuencial.

  13. Solar air-conditioning. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    Within the 3rd International Conference on solar air-conditioning in Palermo (Italy) at 30th September to 2nd October, 2009 the following lectures were held: (1) Removal of non-technological barriers to solar cooling technology across Southern European islands (Stefano Rugginenti); (2) The added economic and environmental value of solar thermal systems in microgrids with combined heat and power (Chris Marney); (3) Australian solar cooling interest group (Paul Kohlenbach); (4) Designing of a technology roadmap for solar assisted air conditioning in Austria (Hilbert Focke); (5) Solar cooling in the new context of renewable policies at European level (Raffaele Piria); (6) Prototype of a solar driven steam jet ejector chiller (Clemens Pollerberg); (7) New integrated solar air conditioning system (Joan Carlos Bruno); (8) Primary energy optimised operation of solar driven desiccant evaporative cooling systems through innovative control strategies; (9) Green chiller association (Uli Jakob); (10) Climate Well {sup registered} (Olof Hallstrom); (11) Low capacity absorption chillers for solar cooling applications (Gregor Weidner); (12) Solar cooling in residential, small scale commercial and industrial applications with adsorption technology (Walter Mittelbach); (13) French solar heating and cooling development programme based on energy performance (Daniel Mugnier); (14) Mirrox fresnel process heat collectors for industrial applications and solar cooling (Christian Zahler); (15) Modelling and analyzing solar cooling systems in polysun (Seyen Hossein Rezaei); (16) Solar cooling application in Valle Susa Italy (Sufia Jung); (17) Virtual case study on small solar cooling systems within the SolarCombi+Project (Bjoern Nienborg); (18) Design of solar cooling plants under uncertainty (Fernando Dominguez-Munoz); (19) Fast pre-design of systems using solar thermally driven chillers (Hans-Martin Henning); (20) Design of a high fraction solar heating and cooling plant in southern

  14. Solar Installation Labor Market Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Friedman, B.; Jordan, P.; Carrese, J.

    2011-12-01

    The potential economic benefits of the growing renewable energy sector have led to increased federal, state, and local investments in solar industries, including federal grants for expanded workforce training for U.S. solar installers. However, there remain gaps in the data required to understand the size and composition of the workforce needed to meet the demand for solar power. Through primary research on the U.S. solar installation employer base, this report seeks to address that gap, improving policymakers and other solar stakeholders understanding of both the evolving needs of these employers and the economic opportunity associated with solar market development. Included are labor market data covering current U.S. employment, expected industry growth, and employer skill preferences for solar installation-related occupations. This study offers an in-depth look at the solar installation sectors. A study published by the Solar Foundation in October 2011 provides a census of labor data across the entire solar value chain.

  15. Magnetohydrodynamic process in solar activity

    Directory of Open Access Journals (Sweden)

    Jingxiu Wang

    2014-01-01

    Full Text Available Magnetohydrodynamics is one of the major disciplines in solar physics. Vigorous magnetohydrodynamic process is taking place in the solar convection zone and atmosphere. It controls the generating and structuring of the solar magnetic fields, causes the accumulation of magnetic non-potential energy in the solar atmosphere and triggers the explosive magnetic energy release, manifested as violent solar flares and coronal mass ejections. Nowadays detailed observations in solar astrophysics from space and on the ground urge a great need for the studies of magnetohydrodynamics and plasma physics to achieve better understanding of the mechanism or mechanisms of solar activity. On the other hand, the spectacular solar activity always serves as a great laboratory of magnetohydrodynamics. In this article, we reviewed a few key unresolved problems in solar activity studies and discussed the relevant issues in solar magnetohydrodynamics.

  16. A feasibility study on active solar space heating technology for office buildings in Greece

    Directory of Open Access Journals (Sweden)

    Letiane Benincá

    2017-12-01

    Full Text Available Este artigo explora a viabilidade de utilizar coletores solares térmicos com capacidade de armazenamento e radiadores convencionais para aquecimento de edifícios de escritórios na Grécia. Um modelo dinâmico de simulação na ferramenta ESP-r é utilizado para analisar o desempenho do sistema de coleta solar integrado ao edifício para diferentes perfis de demanda em todas as zonas climáticas da Grécia. O impacto da capacidade do sistema de armazenamento, a área do coletor e o ângulo de inclinação são investigados quanto ao desempenho geral do sistema. Os escritórios na Grécia se enquadram em vários cenários de demanda anual, determinados pela orientação do edifício, a localização e a exposição ao ambiente externo. Finalmente, uma tentativa é feita para extrapolar as descobertas para todo o estoque de escritórios da Grécia. A partir desse ponto, utilizando o sistema de aquecimento de energia solar ativo proposto, a economia de energia térmica alcançaria 29% no total devido à cobertura solar.

  17. The 3-D solar radioastronomy and the structure of the corona and the solar wind. [solar probes of solar activity

    Science.gov (United States)

    Steinberg, J. L.; Caroubalos, C.

    1976-01-01

    The mechanism causing solar radio bursts (1 and 111) is examined. It is proposed that a nonthermal energy source is responsible for the bursts; nonthermal energy is converted into electromagnetic energy. The advantages are examined for an out-of-the-ecliptic solar probe mission, which is proposed as a means of stereoscopically viewing solar radio bursts, solar magnetic fields, coronal structure, and the solar wind.

  18. Solar Imagery - GONG (Magnetogram)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Global Oscillation Network Group (GONG) is a network of 6 globally-spaced solar observatories that the NOAA Space Weather Prediction Center uses to monitor the...

  19. Solar Probe Plus

    Science.gov (United States)

    Szabo, Adam

    2011-01-01

    The NASA Solar Probe Plus mission is planned to be launched in 2018 to study the upper solar corona with both.in-situ and remote sensing instrumentation. The mission will utilize 6 Venus gravity assist maneuver to gradually lower its perihelion to 9.5 Rs below the expected Alfven pOint to study the sub-alfvenic solar wind that is still at least partially co-rotates with the Sun. The detailed science objectives of this mission will be discussed. SPP will have a strong synergy with The ESA/NASA Solar orbiter mission to be launched a year ahead. Both missions will focus on the inner heliosphere and will have complimentary instrumentations. Strategies to exploit this synergy will be also presented.

  20. Tanzania - Kigoma Solar

    Data.gov (United States)

    Millennium Challenge Corporation — The performance evaluation of the Kigoma solar activity was designed to answer questions about the implementation of the program and about outcomes that may have...

  1. Solar system fault detection

    Science.gov (United States)

    Farrington, R.B.; Pruett, J.C. Jr.

    1984-05-14

    A fault detecting apparatus and method are provided for use with an active solar system. The apparatus provides an indication as to whether one or more predetermined faults have occurred in the solar system. The apparatus includes a plurality of sensors, each sensor being used in determining whether a predetermined condition is present. The outputs of the sensors are combined in a pre-established manner in accordance with the kind of predetermined faults to be detected. Indicators communicate with the outputs generated by combining the sensor outputs to give the user of the solar system and the apparatus an indication as to whether a predetermined fault has occurred. Upon detection and indication of any predetermined fault, the user can take appropriate corrective action so that the overall reliability and efficiency of the active solar system are increased.

  2. Solar system sputtering

    Science.gov (United States)

    Tombrello, T. A.

    1982-01-01

    The sites and materials involved in solar system sputtering of planetary surfaces are reviewed, together with existing models for the processes of sputtering. Attention is given to the interaction of the solar wind with planetary atmospheres in terms of the role played by the solar wind in affecting the He-4 budget in the Venus atmosphere, and the erosion and differentiation of the Mars atmosphere by solar wind sputtering. The study is extended to the production of isotopic fractionation and anomalies in interplanetary grains by irradiation, and to erosion effects on planetary satellites with frozen volatile surfaces, such as with Io, Europa, and Ganymede. Further measurements are recommended of the molecular form of the ejected material, the yields and energy spectra of the sputtered products, the iosotopic fractionation sputtering causes, and the possibility of electronic sputtering enhancement with materials such as silicates.

  3. Solar chemical heat pipe

    International Nuclear Information System (INIS)

    Levy, M.; Levitan, R.; Rosin, H.; Rubin, R.

    1991-08-01

    The performance of a solar chemical heat pipe was studied using CO 2 reforming of methane as a vehicle for storage and transport of solar energy. The endothermic reforming reaction was carried out in an Inconel reactor, packed with a Rh catalyst. The reactor was suspended in an insulated box receiver which was placed in the focal plane of the Schaeffer Solar Furnace of the Weizman Institute of Science. The exothermic methanation reaction was run in a 6-stage adiabatic reactor filled with the same Rh catalyst. Conversions of over 80% were achieved for both reactions. In the closed loop mode the products from the reformer and from the metanator were compressed into separate storage tanks. The two reactions were run either separately or 'on-line'. The complete process was repeated for over 60 cycles. The overall performance of the closed loop was quite satisfactory and scale-up work is in progress in the Solar Tower. (authors). 35 refs., 2 figs

  4. Solar nuclear reactions

    Energy Technology Data Exchange (ETDEWEB)

    Kocharov, G

    1978-04-01

    The current state of neutrino solar astrophysics is outlined, showing the contradictions between the experimental results of solar neutrino detection and the standard solar models constructed on the basis of the star structure and development theory, which give values for high-energy neutrino fluxes considerably exceeding the upper experimental limit. A number of hypotheses interpreting the experimental results are summarized. The hypotheses are critically assessed and experiments are recommended for refining or verifying experimental data. Also dealt with are nuclear reactions in the Sun, as is the attempt to interpret the anomalous by high /sup 3/He fluxes from the Sun and the relatively small amounts of solar neutrinos and gamma quanta. The importance is emphasized of the simultaneous and complex measurement of the fluxes of neutrons, gamma radiation, and isotopes of hydrogen, helium, and boron from the Sun as indicators of nuclear reactions in the Sun.

  5. Solar thermoelectric generator

    Science.gov (United States)

    Toberer, Eric S.; Baranowski, Lauryn L.; Warren, Emily L.

    2016-05-03

    Solar thermoelectric generators (STEGs) are solid state heat engines that generate electricity from concentrated sunlight. A novel detailed balance model for STEGs is provided and applied to both state-of-the-art and idealized materials. STEGs can produce electricity by using sunlight to heat one side of a thermoelectric generator. While concentrated sunlight can be used to achieve extremely high temperatures (and thus improved generator efficiency), the solar absorber also emits a significant amount of black body radiation. This emitted light is the dominant loss mechanism in these generators. In this invention, we propose a solution to this problem that eliminates virtually all of the emitted black body radiation. This enables solar thermoelectric generators to operate at higher efficiency and achieve said efficient with lower levels of optical concentration. The solution is suitable for both single and dual axis solar thermoelectric generators.

  6. Solar results purchasing

    International Nuclear Information System (INIS)

    Sanders, J.

    2001-01-01

    Solar Thermal water heating has made little market penetration in some European countries. The main barriers to market development are: Long payback periods for the technology; Difficulties for the end-user in meeting the initial capital costs of the installation; Lack of confidence in the delivered energy that can be expected from the technology. The third barrier has been addressed using the concept of Guaranteed Solar Results (GSR). This project has addressed the other two main barriers using the concept of Solar Results Purchasing, (SRP) which combines GSR with Third Party Financing. The work was carried out in the UK, France, and Spain. The project used a uniform approach across the three countries. Each team calculated solar performance using an English version of the SOLO programme developed by TECSOL in France to encode the methodology for GSR model contracts. (author)

  7. Nanomaterials for solar energy

    KAUST Repository

    Revaprasadu, Neerish; Bakr, Osman; Ramasamy, Karthik; Malik, Mohammad A.

    2013-01-01

    Nanostructured metal chalcogenides of the elements copper, iron, tin, lead and cadmium have attracted interest in their use as colloidal nanocrystal inks for solar cells. Some of these materials have the advantages of being available in abundance

  8. Molybdenum solar neutrino experiment

    International Nuclear Information System (INIS)

    Wolfsberg, K.; Cowan, G.A.; Bryant, E.A.

    1984-01-01

    The goal of the molybdenum solar neutrino experiment is to deduce the 8 B solar neutrino flux, averaged over the past several million years, from the concentration of 98 Tc in a deeply buried molybdenum deposit. The experiment is important to an understanding of stellar processes because it will shed light on the reason for the discrepancy between theory and observation of the chlorine solar neutrino experiment. Possible reasons for the discrepancy may lie in the properties of neutrinos (neutrino oscillations or massive neutrinos) or in deficiencies of the standard solar model. The chlorine experiment only measures the 8 B neutrino flux in current times and does not address possible temporal variations in the interior of the sun, which are also not considered in the standard model. In the molybdenum experiment, we plan to measure 98 Tc (4.2 Myr), also produced by 8 B neutrinos, and possibly 97 Tc (2.6 Myr), produced by lower energy neutrinos

  9. Solar gravitational redshift

    International Nuclear Information System (INIS)

    Lopresto, J.C.; Chapman, R.D.

    1980-01-01

    Wavelengths of solar spectrum lines should be shifted toward the red by the Sun's gravitational field as predicted by metric theories of gravity according to the principle of equivalence. Photographic wavelengths of 738 solar Fe 1 lines and their corresponding laboratory wavelengths have been studied. The measured solar wavelength minus the laboratory wavelength (Δlambdasub(observed)) averaged for the strong lines agrees well with the theoretically predicted shift (Δlambdasub(theoretical)). Studies show that the departures depend on line strength. No dependence of the departures on wavelength was found within the existing data. By studying strong lines over a wide spectral range, velocity shifts caused by the complex motions in the solar atmosphere seem to affect the results in a minimal fashion. (orig.)

  10. Large Scale Solar Heating

    DEFF Research Database (Denmark)

    Heller, Alfred

    2001-01-01

    The main objective of the research was to evaluate large-scale solar heating connected to district heating (CSDHP), to build up a simulation tool and to demonstrate the application of the simulation tool for design studies and on a local energy planning case. The evaluation was mainly carried out...... model is designed and validated on the Marstal case. Applying the Danish Reference Year, a design tool is presented. The simulation tool is used for proposals for application of alternative designs, including high-performance solar collector types (trough solar collectors, vaccum pipe collectors......). Simulation programs are proposed as control supporting tool for daily operation and performance prediction of central solar heating plants. Finaly the CSHP technolgy is put into persepctive with respect to alternatives and a short discussion on the barries and breakthrough of the technology are given....

  11. Solar Indices Bulletin

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Solar Indices Bulletin is a prompt monthly information product that is distributed within two weeks after the observation month closes. For the month just ended,...

  12. Solar water lifter

    Energy Technology Data Exchange (ETDEWEB)

    Bazarov, B A; Gonchar, V I; Maymerdangulyyev, G; Orekhova, N P; Ryabikov, S V; Strevkov, D S; Tereshin, V D; Yurin, Ye M

    1982-01-01

    A water lifter is described which contains a pump, whose piston is kinematically connected to the drive element made of material with thermal-mechanical memory of the shape in the hot state, and a solar heater.

  13. Solar Imagery - GONG

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Global Oscillation Network Group (GONG) is a network of 6 globally-spaced solar observatories that the NOAA Space Weather Prediction Center uses to monitor the...

  14. Solar energy policy review

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-08-17

    A number of memoranda and reports are collected which deal with evaluations of solar energy policy options, including direct and indirect labor impacts and costs of different options and consumer protection. (LEW)

  15. Solar cell radiation handbook

    Science.gov (United States)

    Tada, H. Y.; Carter, J. R., Jr.; Anspaugh, B. E.; Downing, R. G.

    1982-01-01

    The handbook to predict the degradation of solar cell electrical performance in any given space radiation environment is presented. Solar cell theory, cell manufacturing and how they are modeled mathematically are described. The interaction of energetic charged particles radiation with solar cells is discussed and the concept of 1 MeV equivalent electron fluence is introduced. The space radiation environment is described and methods of calculating equivalent fluences for the space environment are developed. A computer program was written to perform the equivalent fluence calculations and a FORTRAN listing of the program is included. Data detailing the degradation of solar cell electrical parameters as a function of 1 MeV electron fluence are presented.

  16. Solar results purchasing

    Energy Technology Data Exchange (ETDEWEB)

    Sanders, J.

    2001-07-01

    Solar Thermal water heating has made little market penetration in some European countries. The main barriers to market development are: Long payback periods for the technology; Difficulties for the end-user in meeting the initial capital costs of the installation; Lack of confidence in the delivered energy that can be expected from the technology. The third barrier has been addressed using the concept of Guaranteed Solar Results (GSR). This project has addressed the other two main barriers using the concept of Solar Results Purchasing, (SRP) which combines GSR with Third Party Financing. The work was carried out in the UK, France, and Spain. The project used a uniform approach across the three countries. Each team calculated solar performance using an English version of the SOLO programme developed by TECSOL in France to encode the methodology for GSR model contracts. (author)

  17. solar neutrino oscillation phenomenology

    Indian Academy of Sciences (India)

    first present the allowed areas obtained from global solar analysis and demonstrate the preference of the ... We demonstrate through a pro- jected analysis ... 10%) when the same input values of the parameters are used and also demonstrate.

  18. Solar-Terrestrial Interactions

    National Research Council Canada - National Science Library

    Kahler, Stephen W

    2008-01-01

    ...) particle events, the solar wind, and geomagnetic storms. The investigators, working at Hanscom AFB, MA, have used many different kinds of space- and ground-based observations and have collaborated with workers at various institutions in this work...

  19. Photovoltaic solar cell

    Science.gov (United States)

    Nielson, Gregory N; Okandan, Murat; Cruz-Campa, Jose Luis; Resnick, Paul J

    2013-11-26

    A photovoltaic solar cell for generating electricity from sunlight is disclosed. The photovoltaic solar cell comprises a plurality of spaced-apart point contact junctions formed in a semiconductor body to receive the sunlight and generate the electicity therefrom, the plurality of spaced-apart point contact junctions having a first plurality of regions having a first doping type and a second plurality of regions having a second doping type. In addition, the photovoltaic solar cell comprises a first electrical contact electrically connected to each of the first plurality of regions and a second electrical contact electrically connected to each of the second plurality of regions, as well as a passivation layer covering major surfaces and sidewalls of the photovoltaic solar cell.

  20. Conjugated Polymer Solar Cells

    National Research Council Canada - National Science Library

    Paraschuk, Dmitry Y

    2006-01-01

    This report results from a contract tasking Moscow State University as follows: Conjugated polymers are promising materials for many photonics applications, in particular, for photovoltaic and solar cell devices...

  1. Solar radiation over India

    Energy Technology Data Exchange (ETDEWEB)

    Mani, A; Rangarajan, S

    1982-01-01

    Solar radiation data, on horizontal and sloped surfaces, are provided derived from other meteorological parameters at 145 stations covering all major climatic zones of the country. Two methods were used to compute solar radiation, one using regression techniques to derive radiation from sunshine and cloudiness, the other from extra-terrestrial radiation, allowing for its depletion by absorption and scattering in the atmosphere. The methods of calculating the daily global radiation tilt factor using an anisotropic model for diffuse solar radiation are described. The results of statistical analysis of global solar radiation data recorded at 16 stations are presented. Appendices contain an extensive bibliograpny, sun path diagrams for latitudes 6/sup 0/N to 36/sup 0/N, and tables for the calculation of Local Apparent Time from Indian Standard Time.

  2. Simulación y análisis de un sistema de refrigeración por absorción solar intermitente

    Directory of Open Access Journals (Sweden)

    Diana Julissa Ramírez Álvarez

    2016-06-01

    Full Text Available El departamento de Córdoba cuenta con zonas rurales que no hacen parte del sistema interconectado nacional. Esto crea un problema para sus habitantes ya que no pueden conservar alimentos. Sin embargo, la alta disponibilidad de radiación solar durante todo el año, ofrece una alternativa para preservar alimentos utilizando equipos de refrigeración por absorción solar. El objetivo de este trabajo fue simular y analizar un sistema de refrigeración por absorción solar usando el software ASPEN Hysys. Se obtu - vo un coeficiente de desempeño (COP máximo de 1,0 a 93 °C y 1547 kPa, teniendo en cuenta el efecto de distintas variables.

  3. Concentrating Solar Power Projects - KaXu Solar One | Concentrating Solar

    Science.gov (United States)

    Power | NREL KaXu Solar One This page provides information on KaXu Solar One, a concentrating solar power (CSP) project, with data organized by background, parcipants and power plant configuration . Status Date: April 14, 2015 Project Overview Project Name: KaXu Solar One Country: South Africa Location

  4. Photovoltaic Solar Energy

    International Nuclear Information System (INIS)

    Gonzalez N, J.C.; Leal C, H.

    1998-01-01

    A short historical review of the technological advances; the current state and the perspectives of the materials for photovoltaic applications is made. Thereinafter, the general aspects of the physical principles and fundamental parameters that govern the operation of the solar cells are described. To way of the example, a methodology for the design and facilities size of a photovoltaic system is applied. Finally, the perspectives of photovoltaic solar energy in relationship to the market and political of development are mentioned

  5. The solar system

    International Nuclear Information System (INIS)

    Ryan, P.

    1981-01-01

    A comprehensive review is given of the most recent findings on the solar system. The physical processes in the sun are presented, their interactions in the interplanetary space, and the planets and moons of the solar system. The sun and its moon are discussed in great detail. The text is supplemented by excellent satellite pictures, including the latest pictures of Jupiter, Saturn, and their moons. (HM) [de

  6. Chaotic solar oscillations

    Energy Technology Data Exchange (ETDEWEB)

    Blacher, S; Perdang, J [Institut d' Astrophysique, B-4200 Cointe-Ougree (Belgium)

    1981-09-01

    A numerical experiment on Hamiltonian oscillations demonstrates the existence of chaotic motions which satisfy the property of phase coherence. It is observed that the low-frequency end of the power spectrum of such motions is remarkably similar in structure to the low-frequency SCLERA spectra. Since the smallness of the observed solar amplitudes is not a sufficient mathematical ground for inefficiency of non-linear effects the possibility of chaos among solar oscillations cannot be discarded a priori.

  7. Energy from solar balloons

    Energy Technology Data Exchange (ETDEWEB)

    Grena, Roberto [C. R. Casaccia, via Anguillarese 301, 00123 Roma (Italy)

    2010-04-15

    Solar balloons are hot air balloons in which the air is heated directly by the sun, by means of a black absorber. The lift force of a tethered solar balloon can be used to produce energy by activating a generator during the ascending motion of the balloon. The hot air is then discharged when the balloon reaches a predefined maximum height. A preliminary study is presented, along with an efficiency estimation and some considerations on possible realistic configurations. (author)

  8. Solar fuels generator

    Science.gov (United States)

    Lewis, Nathan S.; Spurgeon, Joshua M.

    2016-10-25

    The solar fuels generator includes an ionically conductive separator between a gaseous first phase and a second phase. A photoanode uses one or more components of the first phase to generate cations during operation of the solar fuels generator. A cation conduit is positioned provides a pathway along which the cations travel from the photoanode to the separator. The separator conducts the cations. A second solid cation conduit conducts the cations from the separator to a photocathode.

  9. Factores protectores y de riesgo asociados al uso de alcohol en adolescentes hijos de padre alcohólico, en el Perú Fatores protetores e de risco associados ao uso de álcool em adolescentes filhos de pais alcoólicos no Perú Protection factores and risks associated with alcohol use in adolescents with alcohol-addicted parents in Peru

    Directory of Open Access Journals (Sweden)

    Ines Silva Mathews

    2004-04-01

    Full Text Available La presente investigación tuvo como objetivo el de identificar y analizar los factores protectores y de riesgo relacionados con el uso de alcohol en Adolescentes ente 12 y 18 años de edad, hijos de padre alcohólico. El presente estudio es de tipo cuantitativo, de carácter exploratorio. Para la recolección de datos se utilizo el Drug Use Screening Inventory (DUSI que está diseñado para cuantificar y categorizar los indicadores de consumo de drogas en relación al estado físico, psicosocial, laboral, familiar, relación con pares y académico. Los adolescentes hijos de padre alcohólico, presentan un uso experimental de alcohol, algunos casos hasta la embriaguez, pero no teniendo este consumo como habitual. Los factores de riesgo y de protección para o uso de alcohol entre os jóvenes están en mayor o menor grado asociados a los comportamientos familiares, de los grupos de amigos, parientes y al contexto social en que están insertados.O presente estudo teve como objetivo identificar e analisar os fatores protetores e de riscos relacionados ao uso de álcool entre adolescentes na faixa etária de 12 a 18 anos de idade, filhos de pais alcoolistas. O desenho do estudo é de natureza quantitativa, de caráter exploratório. Para a coleta de dados utilizou-se o questionário Drug Use Screening Inventory (DUSI, o qual tem como objetivo quantificar e categorizar os indicadores de uso de drogas em relação ao estado físico, psicossocial, laboral, familiar, relacionamento com os pares e academico. Os adolescentes filhos de pais alcoolistas, apresentaram uso experimental de álcool, alguns casos até embriaguez, porém não com padrão de uso freqüente. Os fatores de riscos e de proteção para o uso de álcool entre os jovens estão em maior ou menor grau associado aos comportamentos familiares, grupos de amigos, parentes e o contexto social em que estão inseridos.This research aimed to identify and analyze the protection factors and risks

  10. Clay-brick firing in a high-temperature solar furnace

    Energy Technology Data Exchange (ETDEWEB)

    Villeda-Munoz, G. [Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, Instituto Politecnico Nacional, Unidad Queretaro, Queretaro (Mexico)]. E-mail: gvilledam@ipn.mx; Castaneda-Miranda, A. [Computation & amp; Mechatronic Studies Division, Universidad Politecnica de Queretaro, Queretaro (Mexico)]. E-mail: acastaneda@upq.edu.mx; Pless, R.C. [Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, Instituto Politecnico Nacional, Unidad Queretaro, Queretaro (Mexico)]. E-mail: rpless@ipn.mx; Vega-Duran, J.T. [Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, Instituto Politecnico Nacional, Unidad Queretaro, Queretaro (Mexico); Pineda-Pinon, J. [Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, Instituto Politecnico Nacional, Unidad Queretaro, Queretaro (Mexico)]. E-mail: jpinedap@ipn.mx

    2011-10-15

    The firing process for clay-brick production in traditional kilns generates atmospheric pollution when industrial and domestic scrap is used as fuel. An alternative is presented here, using the solar energy for clay-brick firing. We are developing a system for clay-brick firing to reach temperatures between 900 degrees Celsius and 1050 degrees Celsius; these temperatures are sufficiently high to fire bricks or similar ceramic products. The present paper describes the design and characterization of the components of a solar furnace for clay-brick firing with inner chamber dimensions of 0.48 * 0.61 * 0.64 m. To convey the sunlight to the firing chamber, a heliostat with nine 1 * 1 m mirrors is used to send the rays of the sun to an off-axis parabolic concentrator that focuses the light on the entrance of the firing chamber. The heliostat has a solar-tracking system which makes primary and secondary adjustments to assure that the reflected solar radiation always arrives at the concentrator. The firing chamber contains a prismatic cavity that absorbs the solar radiation to generate the heat which is needed for baking the bricks inside the firing chamber. [Spanish] El proceso de coccion para la produccion de tabiques de arcilla en hornos tradicionales genera contaminacion atmosferica cuando los desechos industriales y domesticos se usan como combustibles. Aqui se presenta una alternativa, utilizando la energia solar para la coccion de tabiques de arcilla. Estamos desarrollando un sistema para la coccion de tabiques de arcilla para alcanzar temperaturas entre 900 grados centigradosy 1050 grados centigrados; estas temperaturas son suficientemente altas para cocer tabiques o productos ceramicos similares. El presente articulo describe el diseno y caracterizacion de los componentes de un horno solar para la coccion de tabiques de arcilla con una camara con dimensiones internas de 0.48 * 0.61 *× 0.64 m. Para dirigir los rayos solares a la camara de coccion, un heliostato

  11. Advanced Solar Panel Designs

    Science.gov (United States)

    Ralph, E. L.; Linder, E. B.

    1995-01-01

    Solar panel designs that utilize new high-efficiency solar cells and lightweight rigid panel technologies are described. The resulting designs increase the specific power (W/kg) achievable in the near-term and are well suited to meet the demands of higher performance small satellites (smallsats). Advanced solar panel designs have been developed and demonstrated on two NASA SBIR contracts at Applied Solar. The first used 19% efficient, large area (5.5 cm x 6.5 cm) GaAs/Ge solar cells with a lightweight rigid graphite epoxy isogrid substrate configuration. A 1,445 sq cm coupon was fabricated and tested to demonstrate 60 W/kg with a high potential of achieving 80 W/kg. The second panel design used new 22% efficiency, dual-junction GaInP2/GaAs/Ge solar cells combined with a lightweight aluminum core/graphite fiber mesh facesheet substrate. A 1,445 sq cm coupon was fabricated and tested to demonstrate 105 W/kg with the potential of achieving 115 W/kg.

  12. Solar effects on communications

    International Nuclear Information System (INIS)

    Cleveland, F.; Malcolm, W.; Nordell, D.E.; Zirker, J.

    1991-01-01

    When people involved in the power industry think of Solar Magnetic Disturbances (SMD), they normally consider the potential for disrupting power transmission which results form solar-induced disturbances to the earth's magnetic field known as geomagnetic storms. However, in addition to the disruption of power transmission, solar phenomena can interfere with utility communication systems. Utilities use many different types of communication media, some of which can be affected by various solar phenomena. These include wire-based facilities (metallic cables and power line carrier), radio systems (HF, VHF, UHF mobile radio, microwave networks, and satellite transmissions), and fiber optic systems. This paper reports that the solar flares and other solar phenomena can affect these media through different mechanisms: Radio communications can be disturbed by flare-induced changes in the ionispheric layer of the atmosphere; Cable communications can be disrupted by the flare-induced changes in the magnetosphere which surrounds the earth. These changes, in turn, induce currents in the power equipment that energizes long communications cables; Satellite communications can be disrupted by the flare-induced perturbations of satellite orbits and equipment

  13. Solar History An Introduction

    CERN Document Server

    Vita-Finzi, Claudio

    2013-01-01

    Beyond the four centuries of sunspot observation and the five decades during which artificial satellites have monitored the Sun – that is to say for 99.99999% of the Sun’s existence – our knowledge of solar history depends largely on analogy with kindred main sequence stars, on the outcome of various kinds of modelling, and on indirect measures of solar activity. They include the analysis of lunar rocks and meteorites for evidence of solar flares and other components of the solar cosmic-ray (SCR) flux, and the measurement of cosmogenic isotopes in wood, stratified ice and marine sediments to evaluate changes in the galactic cosmic-ray (GCR) flux and thus infer changes in the sheltering magnetic fields of the solar wind. In addition, shifts in the global atmospheric circulation which appear to result from cyclic fluctuations in solar irradiance have left their mark in river sediments and in the isotopic composition of cave deposits. In this volume the results these sources have already produced have bee...

  14. Quantum dot solar cell

    International Nuclear Information System (INIS)

    Ahamefula, U.C.; Sulaiman, M.Y.; Sopian, K.; Ibarahim, Z.; Ibrahim, N.; Alghoul, M.A.; Haw, L.C.; Yahya, M.; Amin, N.; Mat, S.; Ruslan, M.H.

    2009-01-01

    Full text: The much awaited desire of replacing fossil fuel with photovoltaic will remain a fairy tale if the myriad of issues facing solar cell development are marginalized. Foremost in the list is the issue of cost. Silicon has reached a stage where its use on large scale can no longer be lavishly depended upon. The demand for high grade silicon from the microelectronics and solar industries has soared leading to scarcity. New approach has to be sought. Notable is the increased attention on thin films such as cadmium telluride, copper indium gallium diselenide, amorphous silicon, and the not so thin non-crystalline family of silicon. While efforts to address the issues of stability, toxicity and efficiency of these systems are ongoing, another novel approach is quietly making its appearance - quantum dots. Quantum dots seem to be promising candidates for solar cells because of the opportunity to manipulate their energy levels allowing absorption of a wider solar spectrum. Utilization of minute quantity of these nano structures is enough to bring the cost of solar cell down and to ascertain sustainable supply of useful material. The paper outlines the progress that has been made on quantum dot solar cells. (author)

  15. Solar powered dugout aeration

    International Nuclear Information System (INIS)

    Murrell, S.

    2001-10-01

    Pasture dugouts are a significant source of water for livestock on the Canadian Prairies and as such, must maintain the best water quality possible. Aeration improves the water quality and is part of a good management plan to reduce overall water treatment costs. Although dugouts can be aerated naturally through wind and wave action and photosynthesis, this generally aerates only the top portion of the dugout. Artificial aeration by air injection into the lowest point of the dugout ensures that the water is oxygenated throughout the entire dugout. Solar aeration can be used in remote areas where grid power is not practical. With solar powered aeration systems, solar panels are used to generate the electrical power needed to run the compressor while storing excess energy in batteries. A solar aeration system includes solar panels, deep cycle batteries to store excess power, a control board with a regulator, a compressor, a weighed feeder hose, and an air diffuser. This publication presented the design of a solar aeration system and its cost. 1 tab., 3 figs

  16. Análise Regional para Implantação de Aterro Sanitário Utilizando Software Livre

    Directory of Open Access Journals (Sweden)

    Carina Barbosa Colman

    2016-09-01

    Full Text Available Áreas com aptidão para implantação de aterro sanitário na região Sul do Estado de Mato Grosso do Sul, foram identificadas por meio de Sistemas de Informações Geográficas (SIG utilizando análise multicritério. Atribuíram-se pesos diferenciados para a determinação de áreas consideradas com ou sem restrição para instalação do referido aterro. As classes mais propícias para a instalação do aterro apresentam as maiores áreas (220.800 hectares, representando 78% da área de estudo, nos municípios de Tacuru e Iguatemi. As classes com maior restrição apresentaram-se pouco representativas na área estudada, cabendo ao município de Coronel Sapucaia, o maior quantitativo com cerca de 47 hectares. Fez-se aqui uma primeira aproximação desse tipo de estudo, pois a inclusão de outras variáveis de ordem socioambiental (opinião dos moradores locais,e normas como o Código Florestal e Zoneamento Ecológico Econômico, pode implicar em mais restrições e potencialidades para a localização desse tipo de empreendimento.

  17. Práticas experimentais no ensino de física nuclear utilizando material de baixo custo

    Directory of Open Access Journals (Sweden)

    Cleber Adelar Boff

    2017-05-01

    Full Text Available Uma das dificuldades para o Ensino de Física Moderna é a pouca difusão da experimentação, principalmente para o ensino de Física Nuclear, seja no Ensino Médio ou no Superior.  As atividades sugeridas na literatura geralmente simbolizam o fenômeno real através de simulações. Isso acontece, pois as práticas experimentais, geralmente, envolvem algum tipo de detector de radiação de custo elevado e uma fonte de radiação ionizante que requer cuidados especiais de manuseio e armazenagem, sendo sujeita a regulamentação altamente burocrática no Brasil. O presente trabalho supera estas dificuldades e propõe duas práticas de Física Nuclear experimental utilizando uma câmara de ionização de baixo custo: a medida de filhos do Radônio-222 coletados do ar de ambientes fechados, e a medida do alcance de partículas alfa emitidas pelos filhos do Tório-232 presentes em camisinhas de lampião. O artigo mostra os procedimentos experimentais e os resultados esperados, indicando que as práticas podem servir de suporte para aulas de Física Nuclear.

  18. CARACTERIZAÇÃO DA VARIABILIDADE GENÉTICA EM COUVE-MANTEIGA UTILIZANDO ISOENZIMAS E RAPD

    Directory of Open Access Journals (Sweden)

    SAWAZAKI HAIKO ENOK

    1997-01-01

    Full Text Available Estudou-se a variabilidade genética em couve (Brassica oleracea L. var. acephala D.C. tipo manteiga por intermédio do polimorfismo enzimático em gel de poliacrilamida e do polimorfismo de DNA, denominado RAPD (Random Amplified Polymorphic DNA, com base na amplificação de segmentos de DNA ao acaso. Avaliaram-se quinze clones de couve-manteiga do Banco Ativo de Germoplasma do Instituto Agronômico (IAC, utilizando-se extratos de folhas para análise de isoenzimas e marcador RAPD com os "primers" dos kits A e B da Operon Technologies. Entre as isoenzimas estudadas, as mais polimórficas foram as fosfoglucomutase (PGM, peroxidase (PRX e esterase (EST, tendo o sistema PGM realizado a melhor caracterização. Verificou-se a ocorrência de variabilidade genética por meio de isoenzimas e RAPD, porém não foi observada a similaridade entre os dendrogramas obtidos por ambos os tipos de marcadores, sugerindo que as isoenzimas forneceram menos informação sobre o genoma. A maior eficácia do RAPD foi devida à possibilidade de processar maior número de análises, evidenciando mais detalhes sobre o genoma.

  19. Enfriamiento de café pergamino seco a granel utilizando aireación mecánica controlada

    Directory of Open Access Journals (Sweden)

    Julio E. Ospina M.

    1992-05-01

    Full Text Available Con el fin de garantizar que el café almacenado a granel conserve su calidad durante el tiempo necesario de almacenamiento, se estudió el enfriamiento del café pergamino seco en silos experimentales de dimensiones: 0.5m x 0.5m y 2.8 m de altura, utilizando aire enfriado mecánicamente. Los rangos estudiados fueron: temperatura de 10 a 220C humedad relativa de 66 a 98%y contenido de humedad del grano de 8 a 13.57% b.h. Durante la etapa de almacenamiento se evaluó la variación de la calidad del café según los criterios de coloración de la almendra, población de microorganismos y prueba de taza; paralelamente se dejaron muestras almacenadas en sacosa las condiciones de Chinchiná, como muestra testigo buscando determinar la bondad del almacenamiento a granel, también se dejó un silo sin aireación para determinar el efecto de la aireación controlada en la calidad del café.

  20. Proyección de cifras de producción de café colombiano utilizando cadenas de Markov

    Directory of Open Access Journals (Sweden)

    Yenny Londoño Salazar

    2013-01-01

    Full Text Available El café es considerado el producto agrícola más importante en Colombia, además de ser un gran símbolo en su carta de presentación; sin embargo, el peso relativo de la caficultura aportado al PIB ha disminuido notablemente en los últimos años, reflejado en un descenso en la producción de sacos de café, situación que afecta directamente la cantidad exportada, dando lugar a una pérdida significativa de participación en el mercado mundial de este producto. En este artículo se presenta un estudio sobre el modelamiento matemático del número de sacos de 60 kg de café exportados, aplicando cadenas de Markov discretas en el estado y continuas en el tiempo, utilizando los datos históricos de producción de café para los meses comprendidos entre enero de 2010 y octubre de 2012. Los resultados obtenidos mediante esta técnica matemática muestran que las metas propuestas por el Comité de Cafeteros no se cumplirán si no hay una intervención eficiente en este mercado.

  1. CARACTERÍSTICAS MORFOLÓGICAS E VARIABILIDADE GENÉTICA DE ARATICUM UTILIZANDO MARCADORES RAPD E MICROSSATÉLITES

    Directory of Open Access Journals (Sweden)

    MARCELA VERSIANI VENÂNCIO PIRES

    2015-03-01

    Full Text Available RESUMO Neste trabalho, objetivou-se avaliar a variabilidade genética da coleção de trabalho de acessos de araticum da Embrapa Cerrados e outros materiais próximos ao Distrito Federal, utilizando marcadores moleculares RAPD, microssatélites e análise de características morfológicas. Folhas de 18 acessos de araticum foram coletadas e utilizadas para a extração das amostras de DNA genômico, as quais foram amplificadas para obtenção de marcadores moleculares RAPD e microssatélites. Na análise morfológica, foram avaliadas 23 características dos acessos de araticum. As dissimilaridades genéticas entre os 18 genótipos de araticum evidenciaram a variabilidade genética dos acessos e as análises de agrupamento levaram à formação de três grupos de similaridade. Verificaram-se coeficientes de dissimilaridades genéticas baixos entre os materiais oriundos da Embrapa Cerrados e altos entre os outros materiais. Esses acessos são importantes fontes de variabilidade para o enriquecimento da atual coleção de trabalho da Embrapa Cerrados e para futuros estudos de caracterização morfológica e agronômica.

  2. Geometry of solar corona expansion and solar wind parameters

    International Nuclear Information System (INIS)

    Krajnev, M.B.

    1980-01-01

    The character of the parameter chanqe of solar wind plasma in the region of the Earth orbit is studied. The main regularities in the parametep behaviour of solar wind (plasma velocity and density) are qualitatively explained in the framework of a model according to which solar corona expansion stronqly differs from radial expansion, that is: the solar wind current lines are focused towards helioequator during the period of low solar activity with gradual transfer to radial expansion during the years of high solar activity. It is shown that the geometry of the solar wind current tubes and its change with the solar activity cycle can not serve an explanation of the observed change of the solar wind parameters

  3. Experimental Study on Various Solar Still Designs

    OpenAIRE

    T. Arunkumar; K. Vinothkumar; Amimul Ahsan; R. Jayaprakash; Sanjay Kumar

    2012-01-01

    Humankind has depended for ages on underground water reservoirs for its fresh water needs. But these sources do not always prove to be useful due to the presence of excessive salinity in the water. In this paper, the fabrication of seven solar still designs such as spherical solar still, pyramid solar still, hemispherical solar still, double basin glass solar still, concentrator coupled single slope solar still, tubular solar still and tubular solar still coupled with pyramid solar still and ...

  4. Solar electron source and thermionic solar cell

    Directory of Open Access Journals (Sweden)

    Parham Yaghoobi

    2012-12-01

    Full Text Available Common solar technologies are either photovoltaic/thermophotovoltaic, or use indirect methods of electricity generation such as boiling water for a steam turbine. Thermionic energy conversion based on the emission of electrons from a hot cathode into vacuum and their collection by an anode is also a promising route. However, thermionic solar conversion is extremely challenging as the sunlight intensity is too low for heating a conventional cathode to thermionic emission temperatures in a practical manner. Therefore, compared to other technologies, little has been done in this area, and the devices have been mainly limited to large experimental apparatus investigated for space power applications. Based on a recently observed “Heat Trap” effect in carbon nanotube arrays, allowing their efficient heating with low-power light, we report the first compact thermionic solar cell. Even using a simple off-the-shelf focusing lens, the device delivered over 1 V across a load. The device also shows intrinsic storage capacity.

  5. Avaliação de oxigenadores de sangue utilizando principios de transferencia de massa e tecnica de perda de carga

    OpenAIRE

    Luis Melchert Faber Schmutzler

    2004-01-01

    Resumo: Oxigenadores de sangue tipo de membrana são construídos para trocarem gases de respiração através de uma área de contato, a sua chamada área de troca. Devido a características do processo de fabricação, esta área pode softer variações. Neste trabalho procurou-se desenvolver métodos de avaliação da variação desta área, por meio da medição da transferência de massa e da perda de carga. A técnica utilizando transferência de massa gerou dois métodos de avaliação, um utilizando como fase l...

  6. Solar energy: a UK assessment

    Energy Technology Data Exchange (ETDEWEB)

    1976-01-01

    A panel convened by UK-ISES to analyze all aspects of solar energy systems and to assess the potential for solar energy utilization and research and development needs in the UK and for export is reported. Topics covered include: solar energy in relation to other energy sources; international solar energy research and development program; the physical nature of solar energy and its availability in the UK and other countries; thermal collection, storage, and low-temperature applications; solar energy and architecture; solar thermal power systems; solar cells; agricultural and biological systems; photochemical systems; social, legal, and political considerations with particular reference to the UK; and future policy on solar research and development for the UK. (WDM)

  7. The New Solar System

    Science.gov (United States)

    Beatty, J. Kelly; Collins Petersen, Carolyn; Chaikin, Andrew

    1999-01-01

    As the definitive guide for the armchair astronomer, The New Solar System has established itself as the leading book on planetary science and solar system studies. Incorporating the latest knowledge of the solar system, a distinguished team of researchers, many of them Principal Investigators on NASA missions, explain the solar system with expert ease. The completely-revised text includes the most recent findings on asteroids, comets, the Sun, and our neighboring planets. The book examines the latest research and thinking about the solar system; looks at how the Sun and planets formed; and discusses our search for other planetary systems and the search for life in the solar system. In full-color and heavily-illustrated, the book contains more than 500 photographs, portrayals, and diagrams. An extensive set of tables with the latest characteristics of the planets, their moon and ring systems, comets, asteroids, meteorites, and interplanetary space missions complete the text. New to this edition are descriptions of collisions in the solar system, full scientific results from Galileo's mission to Jupiter and its moons, and the Mars Pathfinder mission. For the curious observer as well as the student of planetary science, this book will be an important library acquisition. J. Kelly Beatty is the senior editor of Sky & Telescope, where for more than twenty years he has reported the latest in planetary science. A renowned science writer, he was among the first journalists to gain access to the Soviet space program. Asteroid 2925 Beatty was named on the occasion of his marriage in 1983. Carolyn Collins Petersen is an award-winning science writer and co-author of Hubble Vision (Cambridge 1995). She has also written planetarium programs seen at hundreds of facilities around the world. Andrew L. Chaikin is a Boston-based science writer. He served as a research geologist at the Smithsonian Institution's Center for Earth and Planetary Studies. He is a contributing editor to

  8. Discovering the Solar System

    Science.gov (United States)

    Jones, Barrie W.

    1999-04-01

    Discovering the Solar System Barrie W. Jones The Open University, Milton Keynes, UK Discovering the Solar System is a comprehensive, up-to-date account of the Solar System and of the ways in which the various bodies have been investigated and modelled. The approach is thematic, with sequences of chapters on the interiors of planetary bodies, on their surfaces, and on their atmospheres. Within each sequence there is a chapter on general principles and processes followed by one or two chapters on specific bodies. There is also an introductory chapter, a chapter on the origin of the Solar System, and a chapter on asteroids, comets and meteorites. Liberally illustrated with diagrams, black and white photographs and colour plates, Discovering the Solar System also features: * tables of essential data * question and answers within the text * end of section review questions with answers and comments Discovering the Solar System is essential reading for all undergraduate students for whom astronomy or planetary science are components of their degrees, and for those at a more advanced level approaching the subject for the first time. It will also be of great interest to non-specialists with a keen interest in astronomy. A small amount of scientific knowledge is assumed plus familiarity with basic algebra and graphs. There is no calculus. Praise for this book includes: ".certainly qualifies as an authoritative text. The author clearly has an encyclopedic knowledge of the subject." Meteorics and Planetary Science ".liberally doused with relevant graphs, tables, and black and white figures of good quality." EOS, Transactions of the American Geophysical Union ".one of the best books on the Solar System I have seen. The general accuracy and quality of the content is excellent." Journal of the British Astronomical Association

  9. A High Rated Solar Water Distillation Unit for Solar Homes

    Directory of Open Access Journals (Sweden)

    Abhishek Saxena

    2016-01-01

    Full Text Available India is presently focusing on complete utilization of solar energy and saving fossil fuels, which are limited. Various solar energy systems like solar cookers, solar water heaters, solar lanterns, solar PV lights, and solar lamps are continuously availing by the people of India at a low cost and on good subsidies. Apart from this, India is a solar energy promising country with a good number of solar homes (carrying solar energy systems in its various locations. The present paper focuses on a unique combination of solar dish cooker (SDC and solar water heater (SWH to produce distilled water with a high distillate and a high daily productivity. The procedure has been discussed on the basis of experimental testing to produce distilled water by combining an evacuated type SWH and a SDC. Experimentation has been carried out in MIT, Moradabad (longitude, 28.83°N, and latitude, 78.78°E by developing the same experimental setup on behalf of solar homes. The daily productivity of distilled water was found around 3.66 litres per day in full sunshine hours for an approximated pH value of 7.7 and a ppm value of 21. The payback period (PBP has been estimated around 1.16 years of the present system.

  10. Seguidor solar adaptativo basado en un controlador lógico programable para paneles fotovoltaicos

    Directory of Open Access Journals (Sweden)

    Celso de la Cruz Casaño

    2012-12-01

    Full Text Available Objetivos: Desarrollar un sistema de seguimiento solar adaptativo para paneles solares fotovoltaicos que no necesitan una configuración inicial. Métodos: Se utilizó el método estructuralista, en el cual se observa la realidad, se construye modelos y se analiza la estructura. Se utilizaron bloques de programación del controlador lógico programable (PLC y de modelos de mecanismos para construir el modelo del seguidor solar; además se aplicó teorías de ingeniería de control como la estabilidad de sistemas dinámicos y control adaptativo. La prueba de estabilidad y el funcionamiento correcto se analiza utilizando todo el sistema en conjunto, luego, se validan estos análisis con las simulaciones y experimentaciones. Resultados: Se presentan resultados de simulación y experimentación, en los cuales se hace evidente que el controlador adaptativo mantiene el error de control de seguimiento muy bajo a pesar de las condiciones nubladas. En las simulaciones y experimentaciones no se requirió una configuración inicial; este hecho es uno de los requisitos que se busca alcanzar en los objetivos. La ventaja de la adaptación es que el seguidor solar seguirá la trayectoria del sol aun cuando este se encuentre oculto por las nubes. Conclusiones: El aporte fue brindar un diseño novedoso de un seguidor solar cronológico adaptativo. El algoritmo de control adaptativo evita la configuración inicial del seguidor solar cronológico.

  11. Large-scale solar purchasing

    International Nuclear Information System (INIS)

    1999-01-01

    The principal objective of the project was to participate in the definition of a new IEA task concerning solar procurement (''the Task'') and to assess whether involvement in the task would be in the interest of the UK active solar heating industry. The project also aimed to assess the importance of large scale solar purchasing to UK active solar heating market development and to evaluate the level of interest in large scale solar purchasing amongst potential large scale purchasers (in particular housing associations and housing developers). A further aim of the project was to consider means of stimulating large scale active solar heating purchasing activity within the UK. (author)

  12. Community Solar Value Project

    Energy Technology Data Exchange (ETDEWEB)

    Powers, John T [Extensible Energy; Cliburn, Jill [Cliburn and Associates

    2017-11-30

    The Community Solar Value Project (CSVP) is designed to assist electric utilities in designing better community solar programs. Better programs seek new sources of value to promote “win-win” solutions between utilities and their customers. The CSVP focused on five “challenge areas” in identifying new sources of value: - Strategic solar design for community solar projects (including technology choices, siting, orientation, and related issues) - Market research and targeted marketing approaches (for program design and for customer recruitment) - Procurement and financing (for establishing best practices that can bring economies of scale and economies of expertise) - Integration of “companion measures” (such as storage and demand-response options that can benefit customer and utility net load shapes) - Pricing in program design (including best practices for integration of identified value in program prices or credits) The CSVP directly engaged the Sacramento Municipal Utility District (SMUD), the Public Service Company of New Mexico (PNM), and more than a dozen other utilities to develop improved community solar program designs. The outcomes include a plan at SMUD for over 100 MW or more of community and shared solar and support for new or expanded programs at 15 other utilities so far. Resulting best-practice solutions have not only informed program applications, but also have generated discussion among experts and industry associations about the new opportunities and challenges CSVP has brought forth. In these ways, the CSVP has impacted community solar programs and DER plans, competitive innovations and policies nationwide. The CSVP team has been led by Extensible Energy under John Powers, President and CEO. Jill Cliburn, of Santa Fe, NM-based Cliburn and Associates, has served as Principal Investigator. The team also benefitted from expertise from Navigant, Olivine Inc. and Millennium Energy, LLC, in addition to the collaborative and cost

  13. Unconventional Solar Sailing

    Science.gov (United States)

    Ceriotti, Matteo

    The idea of exploiting solar radiation pressure for space travel, or solar sailing, is more than a 100 years old, and yet most of the research thus far has considered only a limited number of sail configurations. However solar sails do not have to be inertially-pointing squares, spin-stabilised discs or heliogyros: there is a range of different configurations and concepts that present some advantageous features. This chapter will show and discuss three non-conventional solar sail configurations and their applications. In the first, the sail is complemented by an electric thruster, resulting in a hybrid-propulsion spacecraft which is capable to hover above the Earth's Poles in a stationary position (pole-sitter). The second concept makes use of a variable-geometry pyramidal sail, naturally pointing towards the sun, to increase or decrease the orbit altitude without the need of propellant or attitude manoeuvres. Finally, the third concept shows that the orbit altitude can also be changed, without active manoeuvres or geometry change, if the sail naturally oscillates synchronously with the orbital motion. The main motivation behind these novel configurations is to overcome some of the engineering limitations of solar sailing; the resulting concepts pose some intriguing orbital and attitude dynamics problems, which will be discussed.

  14. Residential solar hot water

    Energy Technology Data Exchange (ETDEWEB)

    1982-06-01

    This report examines the feasibility of using solar energy to preheat domestic water coming from the city supply at a temperature of approximately 4{degree}C. Four solar collectors totalling 7 m{sup 2} were installed on a support structure facing south at an angle of 60{degree} from the horizontal. The system worked most efficiently in the spring and early summer when the combination of long hours of sunshine, clean air and clear skies allowed for maximum availability of solar radiation. Performance dropped in late summer and fall mainly due to cloudier weather conditions. The average temperature in the storage tank over the 10 months of operation was 42{degree}C, ranging from a high of 83{degree}C in July to a low of 6{degree}C in November. The system provided a total of 7.1 GJ, which is approximately one-third the annual requirement for domestic hot water heating. At the present time domestic use of solar energy to heat water does not appear to be economically viable. High capital costs are the main problem. As a solar system with present day technology can only be expected to meet half to two-thirds of the hot water energy demand the savings are not sufficient for the system to pay for itself within a few years. 5 figs.

  15. Solar structure without computers

    International Nuclear Information System (INIS)

    Clayton, D.D.

    1986-01-01

    We derive succinctly the equations of solar structure. We first present models of objects in hydrostatic equilibrium that fail as models of the sun in order to illustrate important physical requirements. Then by arguing physically that the pressure gradient can be matched to the simple function dP/dr = -kre/sup( -r//a) 2 , we derive a complete analytic representation of the solar interior in terms of a one-parameter family of models. Two different conditions are then used to select the appropriate value of the parameter specifying the best model within the family: (1) the solar luminosity is equated to the thermonuclear power generated near the center and/or (2) the solar luminosity is equated to the radiative diffusion of energy from a central region. The two methods of selecting the parameter agree to within a few percent. The central conditions of the sun are well calculated by these analytic formulas, all without aid of a computer. This is an original treatment, yielding much the best description of the solar center to be found by methods of differential and integral calculus, rendering it an excellent laboratory for applied calculus

  16. Solar tomography adaptive optics.

    Science.gov (United States)

    Ren, Deqing; Zhu, Yongtian; Zhang, Xi; Dou, Jiangpei; Zhao, Gang

    2014-03-10

    Conventional solar adaptive optics uses one deformable mirror (DM) and one guide star for wave-front sensing, which seriously limits high-resolution imaging over a large field of view (FOV). Recent progress toward multiconjugate adaptive optics indicates that atmosphere turbulence induced wave-front distortion at different altitudes can be reconstructed by using multiple guide stars. To maximize the performance over a large FOV, we propose a solar tomography adaptive optics (TAO) system that uses tomographic wave-front information and uses one DM. We show that by fully taking advantage of the knowledge of three-dimensional wave-front distribution, a classical solar adaptive optics with one DM can provide an extra performance gain for high-resolution imaging over a large FOV in the near infrared. The TAO will allow existing one-deformable-mirror solar adaptive optics to deliver better performance over a large FOV for high-resolution magnetic field investigation, where solar activities occur in a two-dimensional field up to 60'', and where the near infrared is superior to the visible in terms of magnetic field sensitivity.

  17. Nanocrystal Solar Cells

    Energy Technology Data Exchange (ETDEWEB)

    Gur, Ilan [Univ. of California, Berkeley, CA (United States)

    2006-01-01

    This dissertation presents the results of a research agenda aimed at improving integration and stability in nanocrystal-based solar cells through advances in active materials and device architectures. The introduction of 3-dimensional nanocrystals illustrates the potential for improving transport and percolation in hybrid solar cells and enables novel fabrication methods for optimizing integration in these systems. Fabricating cells by sequential deposition allows for solution-based assembly of hybrid composites with controlled and well-characterized dispersion and electrode contact. Hyperbranched nanocrystals emerge as a nearly ideal building block for hybrid cells, allowing the controlled morphologies targeted by templated approaches to be achieved in an easily fabricated solution-cast device. In addition to offering practical benefits to device processing, these approaches offer fundamental insight into the operation of hybrid solar cells, shedding light on key phenomena such as the roles of electrode-contact and percolation behavior in these cells. Finally, all-inorganic nanocrystal solar cells are presented as a wholly new cell concept, illustrating that donor-acceptor charge transfer and directed carrier diffusion can be utilized in a system with no organic components, and that nanocrystals may act as building blocks for efficient, stable, and low-cost thin-film solar cells.

  18. Reconsidering solar grid parity

    International Nuclear Information System (INIS)

    Yang, C.-J.

    2010-01-01

    Grid parity-reducing the cost of solar energy to be competitive with conventional grid-supplied electricity-has long been hailed as the tipping point for solar dominance in the energy mix. Such expectations are likely to be overly optimistic. A realistic examination of grid parity suggests that the cost-effectiveness of distributed photovoltaic (PV) systems may be further away than many are hoping for. Furthermore, cost-effectiveness may not guarantee commercial competitiveness. Solar hot water technology is currently far more cost-effective than photovoltaic technology and has already reached grid parity in many places. Nevertheless, the market penetration of solar water heaters remains limited for reasons including unfamiliarity with the technologies and high upfront costs. These same barriers will likely hinder the adoption of distributed solar photovoltaic systems as well. The rapid growth in PV deployment in recent years is largely policy-driven and such rapid growth would not be sustainable unless governments continue to expand financial incentives and policy mandates, as well as address regulatory and market barriers.

  19. A Dirty Hero’s Fight for Clean Energy: Satire, Allegory, and Risk Narrative in Ian McEwan’s Solar

    OpenAIRE

    Evi Zemanek

    2012-01-01

    A diferencia de la mayoría de los textos de ficción que narran crisis écologicas, la novela "Solar" (2010) de Ian McEwan, celebrada como "el libro sobre el cambio climático", no esboza un escenario apocalíptico que culmina en una catástrofe colectiva. En lugar de eso, se burla a nivel del discurso de la actual retórica del riesgo, al mismo tiempo que pone en escena la desastrosa gestión de riesgos de su protagonista utilizando el género de la sátira. Mientras que las descr...

  20. OBTENCIÓN DE DEXTRANO Y FRUCTOSA, UTILIZANDO RESIDUOS AGROINDUSTRIALES CON LA CEPA Leuconostoc mesenteroides NRRL B512-F

    Directory of Open Access Journals (Sweden)

    Olga Viviana Rodríguez

    2007-06-01

    Full Text Available Debido al gran potencial biotecnológico que presentan los residuos agroindustriales, se desarrolló el presente trabajo para la obtención de oligosacáridos, utilizando como materia prima residuos de cascaras de naranja, piña y cachaza de caña panelera, a escala de laboratorio. Por medio de un diseño experimental se evaluó la concentración y tipo de sustrato y la temperatura del proceso con tres niveles, para lograr la mayor producción. El desarrollo experimental se llevó a cabo con un volumen de 100 mL y 250 mL. En la etapa final se obtuvo como resultado una producción de 3,4 g/L de dextrano y 5,04 g/L de fructosa, utilizando como sustrato cascaras de naranja con estas condiciones: temperatura de 30 °C y concentración de sustrato de 20 g/L; durante el proceso se midieron el consumo de sustrato y la concentración de biomasa y productos. Se observó el desarrollo del microorganismo con los sustratos empleados en la experimentación, sin adición de nutrientes, con una adaptación favorable a éstos. Finalmente, se realizó una caracterización preliminar del polímero obtenido, con lo que se concluyó que puede obtenerse dextrano de grado técnico para su uso como espesante en la industria de alimentos y en el área de tratamiento de aguas residuales como floculante.Due to biotechnological potential that presents the agro-industrial remainders, the present work was developed about obtaining oligosaccharides using like raw material remainders of orange peels, pineapple peels, and panelera cane slowness, at level laboratory. An experimental design was used to evaluate type and concentration of substrate and process temperature at three levels, accordingly the greatest amount of dextran and fructose produced. All volumes worked were 100 mL and 250 mL. In the final phase, the result was a production of dextran 3.4 g/L and fructose 5.04 g/L, using orange peels as substrate, temperature at 30 °C and concentration of substrate of 20 g

  1. Estudios de sistemas de cuerpos utilizando técnicas de procesamiento de imágenes

    Directory of Open Access Journals (Sweden)

    Dadamia, Danilo

    2009-01-01

    Full Text Available En el siguiente trabajo se expone una innovación tecnológica, con respecto a las prácticas tradicionales de laboratorio, para el estudio del movimiento de cuerpos en interacción. Se analizan, a través de diferentes técnicas de procesamiento, la superposición de series temporales de imágenes consecutivas. Con el programa desarrollado se facilita el estudio de dichos movimientos. En el marco de la investigación y desarrollo, se describe la propuesta didáctica de una actividad pautada de laboratorio donde se integra la modalidad presencial, la utilización de nuevas tecnologías y el entorno de una plataforma de e-learning. El trabajo que se plantea a los estudiantes es el análisis cualitativo del movimiento, el estudio cuantitativo a partir de mediciones obtenidas utilizando la filmación desde una cámara fotográfica, y la comparación de predicciones teóricas con dichas mediciones. Para integrar la utilización de las nuevas tecnologías en el laboratorio con la modalidad blearning se proponen actividades complementarias como la discusión en un foro. Se describe el contexto, el diseño de la experiencia, y se analizan resultados obtenidos con el desarrollo de la práctica en dos cursos de la asignatura Física I en la Facultad de Ingeniería (UBA.

  2. Control del Nivel de Pulpa en un Circuito de Flotación Utilizando una Estrategia de Control Predictivo

    Directory of Open Access Journals (Sweden)

    Cristián Troncoso G.

    2017-07-01

    Full Text Available Resumen: Este trabajo presenta el diseño y resultados de la implementación de una estrategia de control predictivo para el control del nivel de pulpa de un circuito de flotación primario de una minera ubicada en la tercera región de Chile, el cual está compuesto por cinco bancos de flotación. La estrategia considera una representación de estados que modela el nivel de cada banco (utilizando un modelo de múltiples entradas y una salida, el que es obtenido mediante un procedimiento de identificación de sistemas y utiliza un filtro de Kalman como estimador de estados. Para resolver el problema de optimización que calcula la acción de control a aplicar se utiliza un optimizador basado en algoritmos genéticos. Se presentan los resultados de la estrategia de control propuesta mediante datos experimentales. Abstract: This work presents the design and implementation results of a model predictive control strategy used to control the pulp level of a Rougher flotation circuit in a mine located in the third region of Chile, which is composed by five flotation banks. The strategy considers a state space representation to model the pulp level of each bank (with a multiple input - single output model, which is obtained by a system identification procedure and uses a Kalman filter as a state estimator. To solve the optimization problem that calculates the control law, a genetic algorithm based optimization tool is used. Experimental data is used to show the results of the proposed control strategy. Palabras clave: Control predictivo basado en modelo, Identificación de sistemas y estimación de parámetros, Filtro de Kalman, Rechazo a perturbaciones, Minería, metalurgia, metales y materiales, Keywords: Model predictive control, System identification and parameter estimation, Kalman filter, Disturbance rejection, Mining, metalurgy, metals and materials

  3. Cinemática inversa de robot serial utilizando algoritmo genético basado en MCDS

    Directory of Open Access Journals (Sweden)

    Juan Jairo Vaca González

    2015-04-01

    Full Text Available Los robots manipuladores seriales son herramientas eficaces para realizar tareas repetitivas y de precisión en la industria, siempre que se comprenda la cinemática involucrada en el posicionamiento y orientación del efector final. Este artículo presenta una metodología para resolver el problema cinemático inverso de un robot serial (Melfa RV-2A utilizando un algoritmo genético (AG a partir del modelo cinemático directo Screws (MCDS. Para esto, se obtienen los parámetros Screw que modelan el robot, se calcula el espacio de trabajo asociado y se diseña el AG contemplando una función multi-objetivo de alcance de posición y orientación en que se sitúa el efector final, con respecto a una coordenada y orientación de un punto objetivo establecido. La validación del AG se realiza según la aptitud, el tiempo de convergencia y la cantidad de generaciones usadas por la función para alcanzar el objetivo. Por tanto, la implementación de un AG basado en un MCDS es una herramienta prometedora que podría utilizarse para calcular la cinemática inversa de robots seriales. Esta novedosa implementación permite establecer por primera vez la exposición matricial de un sistema cinemático directo para obtener la solución cinemática inversa de un robot serial. En consecuencia, se demuestra que esta es una metodología factible y eficiente para solucionar la cinemática inversa de cualquier tipo de robot manipulador.

  4. Remoção de nitrato da água utilizando bagaço de caju quimicamente modificado

    Directory of Open Access Journals (Sweden)

    Raimundo Renato Melo Neto

    2013-09-01

    Full Text Available O ânion nitrato (NO-3, devido sua alta solubilidade em água, é um contaminante de difícil remoção. Os métodos atualmente empregados para tratamento de água contaminada por nitrato possuem um elevado custo e não são muito eficientes, já que em alguns casos são gerados resíduos mais tóxicos que o próprio nitrato. Tecnologias contemporâneas empregadas para tratamento de efluentes aquosos têm seus mecanismos baseados no fenômeno de adsorção, em que um sólido poroso é capaz de adsorver determinadas substâncias, quando estas estão em contato. Estas tecnologias são economicamente rentáveis quando são empregados rejeitos agrícolas como adsorventes. Baseado no exposto este trabalho tem como objetivo avaliar a eficiência de remoção de nitrato de água, utilizando bagaço de caju quimicamente modificado. Os estudos foram realizados em batelada. Os ensaios de adsorção evidenciaram que o tratamento do bagaço de caju com NaOH 0,1 mol.L-1  alcançou uma eficiência de remoção de 96%, enquanto que o bagaço sem tratamento obteve remoção de 22%. O mecanismo de adsorção modelou-se a uma cinética de pseudo-segunda ordem e foi mais bem correlacionado com a isoterma de Freundlich.  

  5. Correção de dados agrometeorológicos utilizando métodos estatísticos

    Directory of Open Access Journals (Sweden)

    Ricardo Kazuo Baba

    2014-12-01

    Full Text Available A análise de dados climáticos fornece suporte para a previsão de fenômenos, para a avaliação de dados históricos e para a tomada de decisões, em especial na área agrícola. Garantir a sua qualidade é fundamental. O processo de coleta dos dados, através das estações meteorológicas, pode apresentar problemas, onde inconsistências podem ocorrer. Este artigo apresenta uma abordagem para solução do problema, utilizando técnicas estatísticas e geoestatísticas, na identificação de dados inconsistentes e na estimativa de dados a serem corrigidos ou preenchidos. A implementação destas técnicas, em um banco de dados espacial, apresentou-se como um facilitador na identificação e no preenchimento de dados. Para avaliação destas técnicas foram utilizados dados de temperatura coletadas por estações meteorológicas localizadas no Estado do Paraná. Como resultado, as técnicas de identificação de erros mostraram-se adequadas na consistência de erros básicos e históricos. A validação espacial apresentou baixo desempenho por superestimar a quantidade de dados incorretos. As técnicas utilizadas na estimativa dos dados, Krigagem, Inverso da Distância e Regressão Linear, apresentaram desempenho semelhantes com relação à análise dos erros.

  6. EVALUACIÓN DE ABONOS ORGÁNICOS UTILIZANDO COMO INDICADORES PLANTAS DE LECHUGA Y REPOLLO EN POPAYAN, CAUCA

    Directory of Open Access Journals (Sweden)

    JUAN MANUEL MUÑOZ C

    Full Text Available Este estudio tuvo por objeto de evaluar abonos orgánicos provenientes de residuos de cosecha y plazas de mercado de Popayán, utilizando plantas de repollo y lechuga. Se recolectaron residuos de fincas de café y plazas de mercados de Popayán, se elaboraron pilas de compost separadamente y se analizó cada compost para determinar contenido de nutrientes. Se aplicó compost en dos etapas de cultivo como fertilizante. Se utilizó un diseño completamente al azar con tres tratamientos y tres repeticiones, T0: Testigo, sin abono; T1: compost elaborado de pulpa de café, troncho de plátano y gallinaza y T2: compost elaborado con residuos de plazas de mercado. Las pruebas físico-químicas del compost cumplieron la norma NTC 5167 y la diferencia radicó en que T1 es fuente de K y P y T2 de N; la aplicación del compost al suelo mejoró pH, M.O y CIC; la ganancia promedio en peso para los cultivos supero el 300%; los análisis microbiológicos cumplieron los parámetros de INVIMA de control y vigilancia de calidad de productos alimenticios. Se concluyó que los materiales utilizados para producción de compost influyen en las propiedades físico-químicas del abono orgánico y los compostajes cumplieron con 15 parámetros de la norma NTC 5167.

  7. Degradação de poliolefinas utilizando catalisadores zeolíticos Degradation of polyolefins using zeolitic catalysts

    Directory of Open Access Journals (Sweden)

    Maria Letícia M. Valle

    2004-03-01

    Full Text Available Neste trabalho foi estudada a degradação de alguns dos principais constituintes dos rejeitos plásticos (polietileno de alta densidade (HDPE, polietileno de baixa densidade (LDPE e polipropileno (PP, empregando-se um catalisador exausto de unidades de craqueamento de fluidos (FCC e um catalisador zeolítico (ADZ3 sintetizado em laboratório. Utilizando técnicas de termogravimetria (TG-DTG e cromatografia gasosa (CG, foi possível avaliar os produtos gerados no craqueamento destas poliolefinas. Na degradação catalítica de poliolefinas com catalisadores zeolíticos, verificou-se a obtenção preferencial de gasolina, GLP e diesel, produtos importantes na matriz energética brasileira. O catalisador de FCC exausto foi mais seletivo para a produção de gasolina e GLP, enquanto que a produção de diesel foi mais favorecida com o catalisador ADZ3.In this work the degradation of some of the main plastics responsible for waste, viz. high density polyethylene (HDPE, low density polyethylene (LDPE and polypropylene (PP, was studied using a spent FCC catalyst (fluid cracking catalyst and a zeolitic catalyst (ADZ3 synthesized in laboratory. Using thermogravimetry (TG-DTG and gas chromatography (GC techniques, it was possible to evaluate the products from these polyolefins cracking. The catalytic degradation of polyolefins led to a preferential production of LPG, diesel and gasoline, which are important products of the Brazilian energetic matrix. The spent FCC catalyst was more selective for production of LPG and gasoline, whereas the diesel production was more favored with the ADZ3 catalyst.

  8. Solar Energy Development PEIS Information Center

    Science.gov (United States)

    skip navigation Solar Energy Development Programmatic EIS Home About the EIS Public Involvement Solar Energy Solar Energy Zones Maps Documents secondary menu News Frequently Asked Questions Glossary E the Programmatic Environmental Impact Statement for Solar Energy Development in Six Southwestern

  9. Comparing solar energy alternatives

    Energy Technology Data Exchange (ETDEWEB)

    White, J R

    1984-01-01

    The paper outlines a computational procedure for comparing the merits of alternative processes to convert solar radiation to heat, electrical power, or chemical energy. The procedure uses the ratio of equipment investment to useful work as an index. Comparisons with conversion counterparts based on conventional fuels are also facilitated by examining this index. The procedure is illustrated by comparisons of (1) photovoltaic converters of differing efficiencies; (2) photovoltaic converters with and without focusing concentrators; (3) photovoltaic conversion plus electrolysis vs photocatalysis for the production of hydrogen; (4) photovoltaic conversion plus plasma arcs vs photocatalysis for nitrogen fixation. Estimates for conventionally-fuelled processes are included for comparison. The reasons why solar-based concepts fare poorly in such comparisons are traced to the low energy density of solar radiation and its low stream time factor resulting from the limited number of daylight hours available and clouds obscuring the sun.

  10. Comparing solar energy alternatives

    Energy Technology Data Exchange (ETDEWEB)

    White, J R

    1984-01-01

    This paper outlines a computational procedure for comparing the merits of alternative processes to convert solar radiation to heat, electrical power, or chemical energy. The procedure uses the ratio of equipment investment to useful work as an index. Comparisons with conversion counterparts based on conventional fuels are also facilitated by examining this index. The procedure is illustrated by comparisons of (1) photovoltaic converters of differing efficiencies; (2) photovoltaic converters with and without focusing concentrators; (3) photovoltaic conversion plus electrolysis vs photocatalysis for the production of hydrogen; (4) photovoltaic conversion plus plasma arcs vs photocatalysis for nitrogen fixation. Estimates for conventionally-fuelled processes are included for comparison. The reasons why solar-based concepts fare poorly in such comparisons are traced to the low energy density of solar radiation and its low stream time factor resulting from the limited number of daylight hours available and clouds obscuring the sun. 11 references.

  11. Winnebago Tribe Solar Project

    Energy Technology Data Exchange (ETDEWEB)

    Nieman, Autumn [Winnebago Tribe of Nebraska Solar Project (United States)

    2016-02-26

    The strategy of the Solar Project was to reduce fuel use within two years by a roof mounted photovoltaic system. The police/fire building is completely powered by electricity. The renewable energy system we have selected has a power capacity of 23kW and the ability to export 44.3 MWh. We anticipate 32.55% kWh energy savings, an excess of the required 30% reduction, in the building’s total fuel use based on the most current 12 months of data (2012). The solar electric system is a grid-tie, ballast mounted on a flat roof over the police/fire station. The solar electric system includes 280 Watt modules for a nominal total of 22.80 kW. Approximately 84 modules are ballast mounted to the flat roof facing south.

  12. Photovoltaic solar energy conversion

    CERN Document Server

    Bauer, Gottfried H

    2015-01-01

    This concise primer on photovoltaic solar energy conversion invites readers to reflect on the conversion of solar light into energy at the most fundamental level and encourages newcomers to the field to help find meaningful answers on how photovoltaic solar energy conversion can work (better), eventually contributing to its ongoing advancement. The book is based on lectures given to graduate students in the Physics Department at the University of Oldenburg over the last two decades, yet also provides an easy-to-follow introduction for doctoral and postdoctoral students from related disciplines such as the materials sciences and electrical engineering. Inspired by classic textbooks in the field, it reflects the author’s own ideas on how to understand, visualize and eventually teach the microscopic physical mechanisms and effects, while keeping the text as concise as possible so as to introduce interested readers to the field and balancing essential knowledge with open questions.

  13. Solar maximum observatory

    International Nuclear Information System (INIS)

    Rust, D.M.

    1984-01-01

    The successful retrieval and repair of the Solar Maximum Mission (SMM) satellite by Shuttle astronauts in April 1984 permitted continuance of solar flare observations that began in 1980. The SMM carries a soft X ray polychromator, gamma ray, UV and hard X ray imaging spectrometers, a coronagraph/polarimeter and particle counters. The data gathered thus far indicated that electrical potentials of 25 MeV develop in flares within 2 sec of onset. X ray data show that flares are composed of compressed magnetic loops that have come too close together. Other data have been taken on mass ejection, impacts of electron beams and conduction fronts with the chromosphere and changes in the solar radiant flux due to sunspots. 13 references

  14. Solar nuclear energy

    International Nuclear Information System (INIS)

    Tlalka, R.

    1977-01-01

    Brief characteristics are given of solar radiation and of its spectral range. The relation is derived for the gas pressure in the centre of the Sun and the mechanism is described of particle interactions in the Sun. Using the Eddington model the basic nuclear reactions in the Sun are described, namely the proton-proton chain and the C-N cycle. The energy transfer is discussed from the Sun to the boundaries of the Earth atmosphere and inside the atmosphere. The measurement of solar energy is conducted with actinometers, i.e., pyrheliometers, pyranometers and combinations thereof. The results of solar radiation measurement in different weather conditions are graphically represented. (J.B.)

  15. Passive solar heating

    Energy Technology Data Exchange (ETDEWEB)

    Wiberg, K

    1981-11-10

    The present work treats the possibilities for heating according to the passive solar heating method. Problems of 'spatial organization in an energy-saving society' are distinguished from among other social problems. The final delimination of the actual problems under investigation consists of the use of passive solar heating and especially the 'consequences of such solar heating exploitation upon the form and structures' of planning and construction. In the concluding chapter an applied example shows how this method can be used in designing an urban area and what are its limitations. The results indicate the possibilities and difficulties in attempting to transfer this ideal and general method into models and directives for form and structure from which examples of the actual possibilities in practical planning can be given.

  16. The solar power satellite

    Energy Technology Data Exchange (ETDEWEB)

    Combes, P.F.

    1982-01-01

    The construction, launch, components, and operations of satellite solar power systems (SSPS) for direct beaming of solar energy converted to electricity to earth stations are outlined. The reference designs of either Si or concentrator GaAs solar cell assemblies large enough to project 5 GW of power are described. The beam will be furnished by klystrons or amplitrons for reception by rectennas on earth. Conforming to the law of amplitude and the equiphase law will permit high efficiencies, pointing accuracy, and low power deposition/sq cm, thus avoiding environmental problems, although some telecommunications systems may suffer interference. The construction of the dipole rectenna grid is sketched, noting that one receiver would be an ellipse sized at 10 x 13 km. Various forms of pollution which could result from the construction of an SSPS are examined.

  17. Proton solar flares

    International Nuclear Information System (INIS)

    Shaposhnikova, E.F.

    1979-01-01

    The observations of proton solar flares have been carried out in 1950-1958 using the extrablackout coronograph of the Crimea astrophysical observatory. The experiments permit to determine two characteristic features of flares: the directed motion of plasma injection flux from the solar depths and the appearance of a shock wave moving from the place of the injection along the solar surface. The appearance of the shock wave is accompanied by some phenomena occuring both in the sunspot zone and out of it. The consistent flash of proton flares in the other groups of spots, the disappearance of fibres and the appearance of eruptive prominences is accomplished in the sunspot zone. Beyond the sunspot zone the flares occur above spots, the fibres disintegrate partially or completely and the eruptive prominences appear in the regions close to the pole

  18. The solar element

    DEFF Research Database (Denmark)

    Kragh, Helge

    2009-01-01

    of the nineteenth century. In the modest form of a yellow spectral line known as D3, 'helium' was sometimes supposed to exist in the Sun's atmosphere, an idea which is traditionally ascribed to J. Norman Lockyer. Did Lockyer discover helium as a solar element? How was the suggestion received by chemists, physicists...... and astronomers in the period until the spring of 1895, when William Ramsay serendipitously found the gas in uranium minerals? The hypothetical element helium was fairly well known, yet Ramsay's discovery owed little or nothing to Lockyer's solar element. Indeed, for a brief while it was thought that the two...... elements might be different. The complex story of how helium became established as both a solar and terrestrial element involves precise observations as well as airy speculations. It is a story that is unique among the discovery histories of the chemical elements....

  19. The Global Solar Dynamo

    Science.gov (United States)

    Cameron, R. H.; Dikpati, M.; Brandenburg, A.

    2017-09-01

    A brief summary of the various observations and constraints that underlie solar dynamo research are presented. The arguments that indicate that the solar dynamo is an alpha-omega dynamo of the Babcock-Leighton type are then shortly reviewed. The main open questions that remain are concerned with the subsurface dynamics, including why sunspots emerge at preferred latitudes as seen in the familiar butterfly wings, why the cycle is about 11 years long, and why the sunspot groups emerge tilted with respect to the equator (Joy's law). Next, we turn to magnetic helicity, whose conservation property has been identified with the decline of large-scale magnetic fields found in direct numerical simulations at large magnetic Reynolds numbers. However, magnetic helicity fluxes through the solar surface can alleviate this problem and connect theory with observations, as will be discussed.

  20. Solar thermal energy receiver

    Science.gov (United States)

    Baker, Karl W. (Inventor); Dustin, Miles O. (Inventor)

    1992-01-01

    A plurality of heat pipes in a shell receive concentrated solar energy and transfer the energy to a heat activated system. To provide for even distribution of the energy despite uneven impingement of solar energy on the heat pipes, absence of solar energy at times, or failure of one or more of the heat pipes, energy storage means are disposed on the heat pipes which extend through a heat pipe thermal coupling means into the heat activated device. To enhance energy transfer to the heat activated device, the heat pipe coupling cavity means may be provided with extensions into the device. For use with a Stirling engine having passages for working gas, heat transfer members may be positioned to contact the gas and the heat pipes. The shell may be divided into sections by transverse walls. To prevent cavity working fluid from collecting in the extensions, a porous body is positioned in the cavity.

  1. Solar system exploration

    International Nuclear Information System (INIS)

    Briggs, G.A.; Quaide, W.L.

    1986-01-01

    Two fundamental goals lie at the heart of U.S. solar system exploration efforts: first, to characterize the evolution of the solar system; second, to understand the processes which produced life. Progress in planetary science is traced from Newton's definition of the principles of gravitation through a variety of NASA planetary probes in orbit, on other planets and traveling beyond the solar system. It is noted that most of the planetary data collected by space probes are always eventually applied to improving the understanding of the earth, moon, Venus and Mars, the planets of greatest interest to humans. Significant data gathered by the Mariner, Viking, Apollo, Pioneer, and Voyager spacecraft are summarized, along with the required mission support capabilities and mission profiles. Proposed and planned future missions to Jupiter, Saturn, Titan, the asteroids and for a comet rendzvous are described

  2. Solar neutrino detection

    International Nuclear Information System (INIS)

    Miramonti, Lino

    2009-01-01

    More than 40 years ago, neutrinos where conceived as a way to test the validity of the solar models which tell us that stars are powered by nuclear fusion reactions. The first measurement of the neutrino flux, in 1968 in the Homestake mine in South Dakota, detected only one third of the expected value, originating what has been known as the Solar Neutrino Problem. Different experiments were built in order to understand the origin of this discrepancy. Now we know that neutrinos undergo oscillation phenomenon changing their nature traveling from the core of the Sun to our detectors. In the work the 40 year long saga of the neutrino detection is presented; from the first proposals to test the solar models to last real time measurements of the low energy part of the neutrino spectrum.

  3. Solar energy utilization by solar cells and superblack absorbers

    Energy Technology Data Exchange (ETDEWEB)

    Bonnet, D; Selders, M

    1975-10-31

    A review is presented of the physical principles responsible for the characteristics of solar cells, with particular reference to Si homojunction and CdS--Cu/sub 2/S thin film devices. Electric power generation from solar cells still appears uncompetitive economically except in special circumstances, but heating from solar energy using selective absorbers with low reemission is more promising.

  4. Development of nonmetallic solar collector and solar-powered pump

    Science.gov (United States)

    Parker, J. C.

    1979-01-01

    Design and building of two unique components for solar heating (1. flatplate solar collector using no metal components, and 2. solar powered pump for heating and cooling systems are outlined in report. Report also discusses hardware, deliverable end items, problems encountered during fabrication and testing, and performance certification.

  5. Solar Energy Evolution and Diffusion Studies Webinars | Solar Research |

    Science.gov (United States)

    NREL Studies Webinars Solar Energy Evolution and Diffusion Studies Webinars These webinars . Department of Energy's Solar Energy Evolution and Diffusion Studies (SEEDS) program. SEEDS 2017-2019 Study Residential Solar July 20, 2017 Presenters: Kiran Lakkaraju, Sandia National Laboratories Yevgeniy Vorobeychik

  6. Concentrating Solar Power Projects - ISCC Duba 1 | Concentrating Solar

    Science.gov (United States)

    Solar Break Ground: 2016 Start Production: 2017 Participants Developer(s): Saudi Electricity Co. Owner(s ) (%): Saudi Electricity Co. EPC Contractor: Initec Energia Generation Offtaker(s): Saudi Electricity Co. Plant Configuration Solar Field SCA Manufacturer (Model): Flabeg (Ultimate Trough) HCE Manufacturer: Archimede Solar

  7. Solar electricity potentials and optimal angles for mounting solar ...

    African Journals Online (AJOL)

    The need for harnessing solar energy using solar panels mounted at optimal inclination angles in the six geopolitical zones of Nigeria is presented. The optimal angle for mounting solar panels as presented by Photovoltaic Geographic Information System (PVGIS) ranges from 11º to 14º in the Southern zone and 13º to 16º ...

  8. Iowa | Midmarket Solar Policies in the United States | Solar Research |

    Science.gov (United States)

    Center Solar PV projects are eligible for no-interest financing for up to 50% of the financed project Energy Center administers financing and grant programs for solar photovoltaic (PV) projects. Solar cost (capped at $1,000,000). The Iowa Energy Center also offers several matching grants for project

  9. Idaho | Midmarket Solar Policies in the United States | Solar Research |

    Science.gov (United States)

    % interest for solar PV projects. Low-interest financing Idaho Energy Resources Authority Solar PV project for financing through the Idaho Governor's Office and the Idaho Energy Resources Authority. Latest -owned community solar project for Idaho Power. Net Metering Idaho does not have statewide net metering

  10. Solar energy in Uruguay. Increase the use of solar panels

    International Nuclear Information System (INIS)

    Matos, V.

    2010-01-01

    This article is about the future of the solar energy in Uruguay. The main aspects of this kind of energy are solar thermic which is used for cooking food and heating water through solar collectors as well as the photovoltaics which allows the generation of electricity

  11. Solar potential in Turkey

    International Nuclear Information System (INIS)

    Soezen, Adnan; Arcaklioglu, Erol

    2005-01-01

    Most of the locations in Turkey receive abundant solar-energy, because Turkey lies in a sunny belt between 36 deg. and 42 deg. N latitudes. Average annual temperature is 18 to 20 deg. C on the south coast, falls to 14-16 deg. C on the west coat, and fluctuates between 4 and 18 deg. C in the central parts. The yearly average solar-radiation is 3.6 kW h/m 2 day, and the total yearly radiation period is ∼2610 h. In this study, a new formulation based on meteorological and geographical data was developed to determine the solar-energy potential in Turkey using artificial neural-networks (ANNs). Scaled conjugate gradient (SCG), Pola-Ribiere conjugate gradient (CGP), and Levenberg-Marquardt (LM) learning algorithms and logistic sigmoid (logsig) transfer function were used in the networks. Meteorological data for last four years (2000-2003) from 12 cities (Canakkale, Kars, Hakkari, Sakarya, Erzurum, Zonguldak, Balikesir, Artvin, Corum, Konya, Siirt, and Tekirdag) spread over Turkey were used in order to train the neural-network. Meteorological and geographical data (latitude, longitude, altitude, month, mean sunshine-duration, and mean temperature) are used in the input layer of the network. Solar-radiation is in the output layer. The maximum mean absolute percentage error was found to be less than 3.832% and R 2 values to be about 99.9738% for the selected stations. The ANN models show greater accuracy for evaluating solar-resource possibilities in regions where a network of monitoring stations has not been established in Turkey. This study confirms the ability of the ANN to predict solar-radiation values accurately

  12. Estimating Monthly Solar Radiation in South-Central Chile Estimación de Radiación Solar Mensual en la Zona Centro Sur de Chile

    Directory of Open Access Journals (Sweden)

    José Álvarez

    2011-12-01

    Full Text Available Solar radiation is a key component in process-based models. The amount of this energy depends on the location, time of the year, and atmospheric conditions. Several equations and models have been developed for different conditions using historical data from weather station networks or satellite measurements. However, solar radiation estimates are too local since they rely on weather stations or have a resolution that is too coarse when working with satellites. In this study, we estimated monthly global solar radiation for the south-central region of Chile using the r.sun model and validated it with observations from automatic weather stations. We analyzed the performance of global radiation results with the Hargreaves-Samani (HS and Bristow-Campbell (BC models. Estimates from a calibrated rsun model accounted for 89% of the variance (r² = 0.89 in monthly mean values for 15 locations in the research area. The model performed very well for a wide area and conditions in Chile when we compared it with the HS and BC models. Our estimates of global solar radiation using the rsun model could be improved through calibration of ground measurements and more precise cloudiness estimates as they become available. With additional procedures, the rsun model could be used to provide spatial estimates of daily, weekly, monthly, and yearly solar radiation.La radiación solar es un componente clave en los modelos basados en procesos. La cantidad de esta energía depende de la ubicación, época del año, y también de las condiciones atmosféricas. Varias ecuaciones y modelos han sido desarrollados para diferentes condiciones, utilizando datos históricos de las redes de estaciones meteorológicas o de las mediciones por satélite. Sin embargo, las estimaciones de la radiación solar son demasiado locales con estaciones meteorológicas, o con una resolución muy gruesa cuando se trabaja con satélites. En el presente estudio se estimó radiación solar global

  13. Silicon Solar Cell Turns 50

    Energy Technology Data Exchange (ETDEWEB)

    Perlin, J.

    2004-08-01

    This short brochure describes a milestone in solar (or photovoltaic, PV) research-namely, the 50th anniversary of the invention of the first viable silicon solar cell by three researchers at Bell Laboratories.

  14. Solar Leasing Summary, Houston Texas

    Energy Technology Data Exchange (ETDEWEB)

    Hammer, Mary [City of San Antonio, TX (United States)

    2013-02-14

    A relatively new option for homeowners looking to add solar to their home is the solar lease. At present, the solar lease option can be found in California, Arizona, Texas, Colorado, Hawaii, New York and Oregon. The most active companies currently offering solar leases are NRG Energy, Sungevity, Solar City and Sun Run. With the uncertainty and/or lack of subsidies the states participating in these programs have ebbed and flowed over the last few years. However, there is an expectation that in the current market solar leasing will make solar viable without the utility and federal subsidies. NRG Energy is currently testing this expectation in Houston, TX where currently no subsidies or incentives beyond the federal tax incentives, exist. Following is an explanation on the state of solar leasing in Houston, TX and explanation of the current financing options.

  15. Factores de protección relacionado al uso de drogas ilícitas: perspectiva crítica de familiares y personas cercanas a los usuarios de drogas, en la Ciudad de Guayaquil, Ecuador Perspectiva crítica de familiares e pessoas próximas, relacionada a fatores protetores e ao consumo de drogas ilícitas na Cidade de Guayaquil, Equador Critical perspective of relatives and acquaintances regarding protective factors and the use of illict drugs in Guayaquil, Equador

    Directory of Open Access Journals (Sweden)

    Ruth Jakeline Oviedo Rodriguez

    2009-01-01

    Full Text Available La finalidad de este estudio fue determinar la perspectiva crítica que los familiares tienen sobre los factores de protección, en el uso de drogas ilícitas en un centro de salud de Guayaquil. Se trata de un estudio descriptivo y transversal, en el que se utilizó un cuestionario para entrevistar a 100 informantes. Se obtuvieron datos de personas que tienen un familiar o amigo que usa drogas ilícitas. Los resultados demostraron que las características personales y familiares que protegen al usuario de drogas ilícitas fueron: 97% tener sólidos principios morales; 96% expresar sentimientos y emociones; 98% tiempo que la familia dedica a estar reunidos, 95% relación de apoyo por parte de uno los padres, 100% existencia de un gobierno que considere a las drogas como prioridad, 99% una fuerza policial más honesta, 99% crear programas e instituciones dedicadas a la prevención. Se concluye que se deben desarrollar estrategias de prevención para el individuo, la familia y la comunidad.O objetivo deste estudo foi determinar as perspectivas dos familiares e pessoas próximas sobre fatores protetores para o uso de drogas ilícitas, em um centro de saúde em Guayaquil. Estudo descritivo, transversal, que utilizou questionário em amostra composta por 100 indivíduos. Os dados foram obtidos a partir das pessoas que têm um familiar ou amigo que usa drogas. Os resultados mostram que dos fatores pessoais e familiares que podem proteger contra o uso de drogas estão: 97% declararam que é possuir sólidos princípios morais, 96% expressar suas emoções, 98% dedicar tempo à família, 95% ter relação de apoio com um dos pais. Na comunidade, estão de acordo com a necessidade de ter um governo que entenda esse problema, 99% apontam para a necessidade da existência de policiais honestos e 99% programas que protejam as pessoas do uso de droga e instituições empenhadas na prevenção. Família, comunidade e a decisão pessoal têm influência e devem

  16. Drainback solar thermal systems

    DEFF Research Database (Denmark)

    Botpaev, R.; Louvet, Y.; Perers, Bengt

    2016-01-01

    Although solar drainback systems have been used for a long time, they are still generating questions regarding smooth functioning. This paper summarises publications on drainback systems and compiles the current knowledge, experiences, and ideas on the technology. The collective research exhibits...... of this technology has been developed, with a brief description of each hydraulic typology. The operating modes have been split into three stages: filling, operation, and draining, which have been studied separately. A difference in the minimal filling velocities for a siphon development in the solar loop has been...

  17. Solar thermal central receivers

    International Nuclear Information System (INIS)

    Vant-Hull, L.L.

    1993-01-01

    Market issues, environmental impact, and technology issues related to the Solar Central Receiver concept are addressed. The rationale for selection of the preferred configuration and working fluid are presented as the result of a joint utility-industry analysis. A $30 million conversion of Solar One to an external molten salt receiver would provide the intermediate step to a commercial demonstration plant. The first plant in this series could produce electricity at 11.2 cents/kWhr and the seventh at 8.2 cents/kWhr, completely competitive with projected costs of new utility plants in 1992

  18. Characterization of solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Haerkoenen, J.; Tuominen, E.; Nybergh, K.; Ezer, Y.; Yli-Koski, M.; Sinkkonen, J. [Helsinki Univ. of Technology, Otaniemi (Finland). Dept. of Electrical and Communications Engineering

    1998-10-01

    Photovoltaic research in the Electron Physics Laboratory started in 1993, when laboratory joined the national TEKES/NEMO 2 research program. Since the beginning of the project, characterization as well as experimentally orientated development of the fabrication process of the solar cells were carried out parallery. The process development research started by the initiatives of the Finnish industry. At the moment a large amount of the laboratory personnel works on solar cell research and the financing comes mainly from external projects. The funding for the research has come from TEKES, Ministry of Education, Finnish Academy, GETA graduate school, special equipment grants of the university, and from the laboratory

  19. The solar system barometer

    International Nuclear Information System (INIS)

    Anon.

    1999-01-01

    Not all solar eclipses are fascinating visual spectacles. The 'eclipse' that the thermal solar sector underwent between the 1984 oil price's collapse and the beginning of the 90's almost succeeded in sending it straight into a 'black hole'. Luckily, the steadfastness of some sector professionals and the intrinsic qualities of an energy which can be adapted to a great number of different situations got the better of this difficult period. After ten lean years, the sector has been experiencing a new youth for the past four years now. (author)

  20. Physics of solar activity

    Science.gov (United States)

    Sturrock, Peter A.

    1993-01-01

    The aim of the research activity was to increase our understanding of solar activity through data analysis, theoretical analysis, and computer modeling. Because the research subjects were diverse and many researchers were supported by this grant, a select few key areas of research are described in detail. Areas of research include: (1) energy storage and force-free magnetic field; (2) energy release and particle acceleration; (3) radiation by nonthermal electrons; (4) coronal loops; (5) flare classification; (6) longitude distributions of flares; (7) periodicities detected in the solar activity; (8) coronal heating and related problems; and (9) plasma processes.

  1. Solar water lifter

    Energy Technology Data Exchange (ETDEWEB)

    Khandurdyyev, A; Daykhanov, S; Itayev, K I; Kurbanov, N

    1982-01-01

    A water lifter is described which contains a diaphram pump with working cavity and inlet and outlet valves and solar energy collector filled with easily boiling fluid. In order to improve the degree of use of the solar energy and output, the water lifter additionally contains a bellows arranged in the working cavity of the pump and connected to it and the collector, and a cylinder made of magnetic-soft material with a magnetic valve arranged in it with a rod connected to the bellows, a seat for the valve on the upper end and contact plate interacting with the valve in its lower position.

  2. Nanomaterials for solar energy

    KAUST Repository

    Revaprasadu, Neerish

    2013-01-01

    Nanostructured metal chalcogenides of the elements copper, iron, tin, lead and cadmium have attracted interest in their use as colloidal nanocrystal inks for solar cells. Some of these materials have the advantages of being available in abundance and having low toxicity. Developing methods for the combination of the elements to produce binary, ternary and quaternary compounds has dominated research in the field. This chapter will provide the most recent developments (from year 2012 onwards) for the synthesis and use of colloidal nanocrystal inks for solar cell applications. © The Royal Society of Chemistry 2014.

  3. Solar energy in practice

    International Nuclear Information System (INIS)

    Eijpe, H.A.

    1996-01-01

    One of the Dutch energy distribution companies (REMU) applies integrated passive, thermal and photovoltaic solar energy systems in fifty newly built dwellings in Amersfoort, Netherlands. The houses are equipped with a combi-boiler (solar energy and natural gas) and 22.5m 2 photovoltaic panels to produce electricity. Six houses are equipped with an electric heat pump, while the other 44 houses have a high-efficiency low-NO x combi-boiler. The experiences with the project so-far are outlined. 6 figs., 1 tab., 10 refs

  4. Manhattan Solar Cannon

    Science.gov (United States)

    Treffers, Richard R.; Loisos, George; Ubbelohde, Susan; Douglas, Susanna; Pintos, Eduardo; Mulherin, James; Pasley, David

    2015-01-01

    We describe a 2.4 m hexagonal solar collector atop a Manhattan office building used for a solar / arts project. The collector uses an afocal design to concentrate the sunlight into a 0.6 m diameter beam which is directed by mirrors into a 80 m long fiber optic sculpture which descends an interior stairwell. The collector is fully steerable and follows the sun each day robotically. The control system and the optical design of the collector as well as the fiber optic sculpture will be discussed.

  5. Solar and stellar oscillations

    International Nuclear Information System (INIS)

    Fossat, E.

    1981-01-01

    We try to explain in simple words what a stellar oscillation is, what kind of restoring forces and excitation mechanisms can be responsible for its occurence, what kind of questions the theoretician asks to the observer and what kind of tools the latter is using to look for the answers. A selected review of the most striking results obtained in the last few years in solar seismology and the present status of their consequences on solar models is presented. A brief discussion on the expected extension towards stellar seismology will end the paper. A selected bibliography on theory as well as observations and recent papers is also included. (orig.)

  6. Flexible Solar Cells

    Science.gov (United States)

    1994-01-01

    Solar cell "modules" are plastic strips coated with thin films of photovoltaic silicon that collect solar energy for instant conversion into electricity. Lasers divide the thin film coating into smaller cells to build up voltage. Developed by Iowa Thin Film Technologies under NASA and DOE grants, the modules are used as electrical supply for advertising displays, battery rechargers for recreational vehicles, and to power model airplanes. The company is planning other applications both in consumer goods and as a power source in underdeveloped countries.

  7. Solar energy conversion

    CERN Document Server

    Likhtenshtein, Gertz I

    2012-01-01

    Finally filling a gap in the literature for a text that also adopts the chemist?s view of this hot topic, Prof Likhtenshtein, an experienced author and internationally renowned scientist, considers different physical and engineering aspects in solar energy conversion. From theory to real-life systems, he shows exactly which chemical reactions take place when converting light energy, providing an overview of the chemical perspective from fundamentals to molecular harvesting systems and solar cells. This essential guide will thus help researchers in academia and industry better understa

  8. Solar noise storms

    CERN Document Server

    Elgaroy, E O

    2013-01-01

    Solar Noise Storms examines the properties and features of solar noise storm phenomenon. The book also presents some theories that can be used to gain a better understanding of the phenomenon. The coverage of the text includes topics that cover the features and behavior of noise storms, such as the observable features of noise storms; the relationship between noise storms and the observable features on the sun; and ordered behavior of storm bursts in the time-frequency plane. The book also covers the spectrum, polarization, and directivity of noise storms. The text will be of great use to astr

  9. Solar reflection panels

    Science.gov (United States)

    Diver, Jr., Richard B.; Grossman, James W [Albuquerque, NM; Reshetnik, Michael [Boulder, CO

    2006-07-18

    A solar collector comprising a glass mirror, and a composite panel, wherein the back of the mirror is affixed to a front surface of the composite panel. The composite panel comprises a front sheet affixed to a surface of a core material, preferably a core material comprising a honeycomb structure, and a back sheet affixed to an opposite surface of the core material. The invention may further comprise a sealing strip, preferably comprising EPDM, positioned between the glass mirror and the front surface of the composite panel. The invention also is of methods of making such solar collectors.

  10. Crosstalk in solar polarization measurements

    Science.gov (United States)

    West, E. A.; Balasubramaniam, K. S.

    1992-01-01

    The instrumental crosstalk associated with the Marshall Space Flight Center Vector Magnetograph and the solar crosstalk created by the magnetic field are described and their impact on the reconstruction of the solar vector magnetic field is analyzed. It is pointed out that identifying and correcting the crosstalk is important in the development of realistic models describing the solar atmosphere. Solar crosstalk is spatially dependent on the structure of the magnetic field while instrumental crosstalk is dependent on the position of the analyzer.

  11. Solar collector manufacturing activity, 1990

    International Nuclear Information System (INIS)

    1992-01-01

    The Solar Collector Manufacturing Activity 1990 report prepared by the Energy Information Administration (EIA) presents summary and detailed data provided by domestic manufacturers on shipments of solar thermal collectors and photovoltaic cells and modules. Summary data on solar thermal collector shipments are presented for the period 1974 through 1990. Summary data on photovoltaic cell and module shipments are presented for the period 1982 through 1990. Detailed information for solar thermal collectors and photovoltaic cells and modules are presented for 1990

  12. Solar energy in Amersfoort, Netherlands

    International Nuclear Information System (INIS)

    Eijpe, H.A.

    1997-01-01

    For the first time in the world a newly to be built housing area (Nieuwland in Amersfoort, Netherlands) will be constructed, exclusively on the basis of sustainability. First, the use of three forms of solar energy conversion techniques (thermal solar energy, passive solar energy and photovoltaic energy) is going to be integrated in 50 rental houses. At the end of this century 10,000 m 2 of solar cells will be installed with a capacity of 1 MWp. 2 figs

  13. Small Hybrid Solar Power System

    OpenAIRE

    Kane, El Hadj Malick; Larrain, Diego; Favrat, Daniel

    2001-01-01

    This paper introduces a novel of mini-hybrid solar power plant integrating a field of solar concentrators, two superposed Organic Rankine Cycles (ORC) and a (bio)Diesel engine. Turbines for the organic Rankine Cycles are hermetic scroll expander-generators. Sun tracking solar collectors are composed of rows of flat mirror bands (CEP) arranged in a plane, which focus the solar energy onto a collector tube similar to those used in SEGS plant in California. The wast...

  14. Small Hybrid Solar Power System

    OpenAIRE

    Kane, El Hadj Malick; Favrat, Daniel; Larrain, Diego; Allani, Yassine

    2003-01-01

    This paper introduces a novel of mini-hybrid solar power plant integrating a field of solar concentrators, two superposed Organic Rankine Cycles (ORC) and a (bio)Diesel engine. Turbines for the organic Rankine Cycles are hermetic scroll expander-generators. Sun tracking solar collectors are composed of rows of flat mirror bands (CEP) arranged in a plane, which focus the solar energy onto a collector tube similar to those used in SEGS plant in California. The waste heat from both...

  15. Strong increase of solar panels

    International Nuclear Information System (INIS)

    Segers, R.; Janssen, S.

    2012-01-01

    The number of installed solar panels in 2011 has increased again. 40 megawatt of new panels have been installed. This increase is twice as high as the year before. The production of solar power increased to 90 million kWh in 2011 as a result of this expansion. However, the share of solar power in total energy use is still very limited. [nl

  16. Degradation of CIGS solar cells

    NARCIS (Netherlands)

    Theelen, M.J.

    2015-01-01

    Thin film CIGS solar cells and individual layers within these solar cells have been tested in order to assess their long term stability. Alongside with the execution of standard tests, in which elevated temperatures and humidity levels are used, the solar cells have also been exposed to a

  17. When the solar energy pays

    International Nuclear Information System (INIS)

    Laramee, V.

    1997-01-01

    In the californian desert of Mojave, the three biggest solar power plants in the world produce 90% of world solar electric power. They have been operating for ten years, and their managers go on to improve them. These installations beat the productivity record every year, proving that the thermal solar energy can be competitive. (N.C.)

  18. Direct solar-pumped lasers

    Science.gov (United States)

    Lee, J. H.; Shiu, Y. J.; Weaver, W. R.

    1980-01-01

    The feasibility of direct solar pumping of an iodine photodissociation laser at lambda = 1.315 microns was investigated. Threshold inversion density and effect of elevated temperature (up to 670 K) on the laser output were measured. These results and the concentration of solar radiation required for the solar pumped iodine laser are discussed.

  19. 2010 Solar Technologies Market Report

    Energy Technology Data Exchange (ETDEWEB)

    2011-11-01

    The U.S. Department of Energy (DOE) 2010 Solar Technologies Market Report details the market conditions and trends for photovoltaic (PV) and concentrating solar power (CSP) technologies. Produced by the National Renewable Energy Laboratory (NREL), the report provides a comprehensive overview of the solar electricity market and identifies successes and trends within the market from both global and national perspectives.

  20. Job creation potential of solar

    International Nuclear Information System (INIS)

    McMonagle, R.

    2005-01-01

    This document defines the size of the job market within Canada's solar industry and presents a preliminary forecast of the employment opportunities through to 2025. The issue of job potential within Canada's solar technologies is complicated by the wide range of different fields and technologies within the solar industry. The largest energy generator of the solar technologies is passive solar, but the jobs in this sector are generally in the construction trades and window manufacturers. The Canadian Solar Industries Association estimates that there are about 360 to 500 firms in Canada with the primary business of solar technologies, employing between 900 to 1,200 employees. However, most solar manufacturing jobs in Canada are for products exports as demonstrated by the 5 main solar manufacturers in Canada who estimate that 50 to 95 per cent of their products are exported. The main reason for their high export ratio is the lack of a Canadian market for their products. The 3 categories of job classifications within the solar industry include manufacturing, installation, and operations and maintenance. The indirect jobs include photovoltaic system hardware, solar hot water heating, solar air ventilation, and glass/metal framing. 17 refs., 3 tabs., 2 figs