Cistectomía parcial y cáncer vesical

Directory of Open Access Journals (Sweden)

Octavio De La Concepción Gómez

1997-04-01

Full Text Available La cistectomía parcial es una técnica quirúrgica muy empleada en nuestro medio para la resolución de las neoplasias vesicales. En los años 70 fueron publicados múltiples trabajos donde se evaluaba su eficacia e indicaciones, para quedar estas últimas bien establecidas. Las tendencias internacionales han evolucionado en los últimos 10 años hacia la cirugía radical y la sustitución vesical; la experiencia acumulada hasta la actualidad ha llevado a muchas autoridades en la materia a cuestionarse sobre la utilidad de ser tan agresivos con estos pacientes, reducir su calidad de vida y descubrir que pueden tener recidivas locales a pesar de los extremo del tratamiento. Con el objetivo de conocer la supervivencia en 5 años de los pacientes sometidos a cistectomía parcial y que no recibieron tratamiento coadyuvante, se revisaron los pacientes intervenidos mediante cistectomía parcial para neoplasias vesicales primarias durante 1984 y 1985 en el Servicio de Urología del Hospital "Calixto García". También se muestra la mortalidad operatoria, las complicaciones quirúrgicas y se comparan con otros estudios publicados. La mortalidad operatoria fue del 9,09 %, la principal causa el sangramiento digestivo alto. La supervivencia bruta, del 59 % a los 5 años; los pacientes con mejor supervivencia presentaban tumores en estadios T1 y T2, con grados de diferenciación entre G-I y G-II. Se concluye que la cistectomía parcial es una alternativa útil en el tratamiento primario de las neoplasias vesicales y que su eficacia aumenta con el empleo de terapias coadyuvantes y con un buen estadiamiento preoperatorioPartial cystectomy is a surgical technique frequently used in our environment for the resolution of bladder neoplasms. During 1970s a great deal of medical papers were published in which the efficacy of and the indications for this technique were assessed. The latter being well established. International trends have evolved during the last 10

Predicción del porcentaje de proteína total a partir de muestreos parciales y ajuste de efectos medioambientales

Directory of Open Access Journals (Sweden)

Maria C Ceballos B.

2012-04-01

Full Text Available Objetivo. Hallar una ecuación matemática para estimar el porcentaje de proteína promedio total (PPPT, a partir de la producción parcial (PP y otros factores ambientales que afectan esta característica. Materiales y métodos. La investigación fue realizada en tres fincas lecheras del departamento de Antioquia, Colombia. Se muestrearon 182 vacas Holstein; la captura de información se llevó a cabo mediante muestreos mensuales de dos ordeños diarios. Se tomó información relacionada con hora de entrada al ordeño, producción de leche, número de parto, época del parto y los días en lactancia. El análisis estadístico se realizó mediante un modelo de regresión múltiple donde se determinaron las fuentes de variación significativas sobre el porcentaje de proteína total del día. A partir de los coeficientes de regresión estimados se generó un modelo de predicción para la variable antes mencionada. Resultados. Los efectos número de parto, días de lactancia, producción de proteína parcial (pm, producción de leche, expresión cuadrática de la producción de proteína parcial (am, producción de proteína parcial (am y el intervalo entre ordeños tuvieron un efecto significativo (p<0.05 sobre el porcentaje de proteína total del día; a partir de estos efectos se generaron dos modelos de predicción de PPPT a partir de un muestreo parcial (am y pm. Conclusiones. El PPPT está afectado por diversos factores medioambientales que deben ser ajustados para los modelos de predicción. Estos modelos pueden ser aplicados para ajustar datos de un muestreo parcial (am o pm y ajustarlos posteriormente a un valor de producción de proteína promedio día, en los programas de mejoramiento genético.

Albinismo parcial em cutia Dasyprocta azarae (Lichtenstein, 1823 (Rodentia, Dasyproctidae, no sul do Brasil

Directory of Open Access Journals (Sweden)

Stefan Vilges de Oliveira

2009-06-01

Full Text Available http://dx.doi.org/10.5007/2175-7925.2009v22n4p243 O presente trabalho registra um caso de albinismo parcial em cutia, Dasyprocta azarae, observado no município de Caçapava do Sul, RS.

Regeneração do fígado de ratos após oclusão parcial da drenagem venosa hepática Hepatic regeneration after parcial oclusion of hepatic vein drainage in rats

Directory of Open Access Journals (Sweden)

Luiz Roberto Farion de Aguiar

2009-06-01

Full Text Available INTRODUÇÃO: A regeneração hepática é um mecanismo para superar a perda de tecido funcional do fígado. Este processo é estudado através de diferentes métodos. OBJETIVO: Avaliar o efeito da oclusão parcial da drenagem venosa hepática sobre a regeneração do fígado remanescente de ratos submetidos à hepatectomia parcial. MÉTODO: Foram colhidas biópsias de fígado em 30 ratos Wistar machos, e a seguir realizada hepatectomia a dois terços. Os animais foram divididos em três grupos: um grupo controle e dois grupos de estudo, submetidos a diferentes graus de estenose da veia hepática direita. Após 96 horas do estímulo para regeneração hepática, todos submeteram-se à outra biópsia hepática. Analisaram-se os fragmentos por imunoistoquímica para os marcadores Ki-67 e fator de von Willebrand. Para a leitura das amostras utilizou-se o sistema SAMBA 4000. A deposição de colágeno foi avaliada pela coloração tricrômico de Masson. RESULTADOS: A proliferação celular dos animais submetidos à hepatectomia parcial e estenose moderada ou severa da veia hepática direita persistiu mais elevada quando comparada ao grupo controle. O Índice de Marcação para o Ki-67 foi significativamente mais elevado após a hepatectomia nos grupos submetidos à oclusão parcial da veia hepática, tanto moderada quanto severa. A expressão de fator de von Willebrand estava diminuída após a hepatectomia parcial nos três grupos. Houve pouco depósito de colágeno no tecido hepático nos animais dos dois grupos com estenose da veia hepática direita. CONCLUSÃO: A oclusão parcial da drenagem venosa hepática em ratos submetidos à hepatectomia parcial prolonga o tempo de proliferação de células hepáticas quando comparado aos animais com veias de calibre normal. Como consequência, também houve atraso na restauração da matriz extracelular e na formação de novos vasos sinusoidais.BACKGROUND: Hepatic regeneration is a mechanism to overcome

Evaluación histológica de la reparación tisular posterior a la realización de técnicas de palatectomía parcial equina

OpenAIRE

Escobar, Hamilton; Peniche, Irina; Álvarez, Leonardo; Martínez, Mastoby

2006-01-01

Objetivo. Evaluar la reparación tisular posterior a la realización de técnicas de palatectomía parcial, como tratamiento de la palatitis en equinos. Materiales y métodos. Se utilizaron 12 caballos, divididos aleatoriamente en dos grupos, ambos con seis animales, a los del primer grupo se les practicó palatectomía parcial con suturación y a los del segundo grupo, se les realizó palatectomía parcial y luego cauterización. Los grupos fueron divididos en tres subgrupos de dos animales cada uno. A...

Soluciones utilitarias de compromiso en problemas multi-objetivo con informacion parcial

Directory of Open Access Journals (Sweden)

Hinojosa, M. A.

2009-01-01

Full Text Available En este trabajo se analizan problemas de optimización multi-objetivo en situaciones en que las preferencias del agente decisor pueden representarse por funciones aditivas y solo se dispone de información parcial sobre los pesos de importancia de los objetivos. Este análisis puede interpretarse también en términos de decisión en grupo, cuando distintos agentes proporcionan pesos distintos para los objetivos, y a partir de ahí hay que llegar a un consenso sobre la solución a elegir. En este contexto de información parcial se introduce una clase de soluciones que pueden considerarse un compromiso entre las soluciones del tipo maximin y las soluciones utilitarias. También se analizan algunas de sus principales propiedades. ABSTRACT We analyze multiple objective optimization problems in situations in which the preferences of the decision maker can be represented by additive functions and only partial information about the importance of the objectives is available. This analysis can also be interpreted in terms of group decision-making when different agents provide different weights for the objectives, and a consensus about the solution to choose has to be reached. In this context of partial information we introduce a class of solutions that can be considered as a compromise between the solutions based on a maxmin criterion and the utilitarian solutions. We also analyze some of their main properties.

Modelo experimental de hepatectomia parcial laparoscópica em ratos

Directory of Open Access Journals (Sweden)

Oliveira Fabrício Mascarenhas de

2003-01-01

Full Text Available OBJETIVO: Descrever um modelo experimental de hepatectomia parcial laparoscópica em ratos. MÉTODOS: Foram utilizados 35 ratos Rattus Norvegicus albinus da linhagem Wistar todos machos pesando 250+/-50g. Os animais foram anestesiados com cetamina e xilasina, e submetidos à insuflação através da agulha de Veress com PCO2 de 7mmHg. Após o pneumoperitôneo foram transpassados pela parede abdominal dois trocateres com 5 e um com 11 mm de espessura, de tal modo a formarem uma figura geométrica triangular. A ligadura de três lobos hepáticos (esquerdo, central esquerdo e central direito foi feita utilizando-se o "endoloop" e a eletrocoagulação dos pontos hemorrágicos através do "hook". Os animais foram sacrificados após um período de observação de oito dias. RESULTADOS: Três animais (8,6% morreram na indução anestésica. Após um período de observação de oito dias 30 animais sobreviveram (85,7%, e apenas 2 (5,7% vieram a óbito no pós-operatório imediato. Quanto às complicações, a presença de granuloma foi observada em 54,3% dos ratos (n=19. Nenhuma conversão para a cirurgia aberta foi necessária. CONCLUSÃO: O modelo de hepatectomia parcial laparoscópica em ratos utilizando material cirúrgico semelhante ao usado em humanos é factível para o treinamento e aprimoramento de novos cirurgiões.

Estudio de factibilidad para un minimercado de conveniencia en el Plan Parcial La Asomadera

OpenAIRE

Arango Aguirre, Juan Manuel; Rodríguez Botero, Jorge Eduardo

2016-01-01

Este trabajo pretende analizar la factibilidad de establecer un auto-mercado de conveniencia en el Plan Parcial La Asomadera (barrio El Poblado, Medellín) a través de un estudio del mercado constructor en la ciudad -- El proceso se realizará mediante una metodología que evalúe la factibilidad legal, ambiental, comercial, técnica y financiera del proyecto, con el fin de sentar las bases para un emprendimiento futuro

Ecuaciones en derivadas parciales con condiciones de contorno no lineales aplicaciones a la dinámica de tumores

OpenAIRE

Morales Rodrigo, Cristian

2009-01-01

Esta tesis presenta tres partes: En la primera haremos un estudio teórico general de las ecuaciones elípticas en derivadas parciales con condiciones de contorno no lineales. Posteriormente, en la segunda, haremos un estudio teórico de ecuaciones elíptica

EVALUACIÓN HISTOLÓGICA DE LA REPARACIÓN TISULAR POST PALATECTOMÍA PARCIAL EQUINA

Directory of Open Access Journals (Sweden)

Hamilton Escobar B

2006-12-01

Full Text Available Objetivo. Evaluar la reparación tisular posterior a la realización de técnicas de palatectomía parcial,como tratamiento de la palatitis en equinos. Materiales y métodos. Se utilizaron 12 caballos,divididos aleatoriamente en dos grupos, ambos con seis animales, a los del primer grupo se lespracticó palatectomía parcial con suturación y a los del segundo grupo, se les realizó palatectomíaparcial y luego cauterización. Los grupos fueron divididos en tres subgrupos de dos animales cadauno. A los primeros subgrupos, suturados y cauterizados, se les tomó biopsia el día 5; a los segundossubgrupos, el día 15 y a los terceros el día 30 posquirúrgico. Resultados. El día 5 posquirúrgico,en ambos grupos se observó la presencia de infiltrado celular inflamatorio de tipo mononuclear(macrófago, inicio del proceso de epitelización, proliferación fibroblástica y formación de nuevosvasos sanguíneos; notándose severa ulceración del epitelio con abundantes detritos celulares soloen los animales cauterizados. El día 15 posquirúrgico, en los animales suturados, se observó infiltradocelular mononuclear, proliferación epitelial y fibroblástica, y presencia de nuevos vasos sanguíneos.Las muestras de los animales cauterizados, presentaron además, ulceración epitelial, detrituscelulares y formación de tejido de granulación desorganizado. El día 30 posquirúrgico, los animalessuturados, no mostraron inflamación evidente, el epitelio se observó con características normalesaunque más grueso que el adyacente. En los animales cauterizados, no se observó infiltrado celularmononuclear, aunque continuaba la ulceración epitelial, igualmente existía, proliferaciónfibroblástica desorganizada y abundantes fibras colágenas. Conclusión. Es posible concluir que elproceso de reparación tisular se vio favorecido por la técnica de palatectomía parcial con suturación.

Hidrólise parcial enzimática da gordura de babaçu

Directory of Open Access Journals (Sweden)

OLIVEIRA Andréa Lícia de Almeida

1999-01-01

Full Text Available Lipases são enzimas de origem animal, vegetal ou microbiana que catalisam a hidrólise total ou parcial de óleos e gorduras, fornecendo ácidos graxos livres, acilgliceróis parciais e glicerol. O trabalho teve como objetivo verificar a ação da lipase comercial FAP (Amano Pharmaceutical Co. no processo de hidrólise parcial da gordura de babaçu. Foi utilizada a Metodologia de Superfície de Resposta para representar o sistema na região estudada. O tratamento estatístico possibilitou analisar a influência das variáveis indepentes concentração de enzima (3 a 327U/mL e tempo de reação (1 a 31h na variável dependente: % de hidrólise. Os resultados experimentais observados nas reações, variaram de 6,52 a 41,44% de hidrólise da gordura de babaçu. Pela aplicação do modelo estatístico, os resultados estimados variaram de 13,57 a 43,80% de hidrólise. O nível de significância foi de 99% para o modelo % de hidrólise. Foi observado que 87,8% da variação da resposta pode ser explicada pela regressão múltipla, demostrando ser bom o ajustamento do modelo aos dados experimentais.

El allanamiento parcial a propósito de la reforma introducida por la ley 19.090 al Código General del Proceso

Directory of Open Access Journals (Sweden)

Ignacio Pérez Bessio

2015-07-01

Full Text Available El presente trabajo estudia el alcance del allanamiento parcial, que en la reciente reforma del Código General del Proceso por la ley 19.090, se ha regulado la posibilidad de su ejecución. Se menciona el régimen anterior según el cual el allanamiento parcial se resolvía en oportunidad de dictado de sentencia definitiva y el régimen actual que se prevé su dictado en Audiencia Preliminar constituyendo dicha sentencia de condena título de ejecución. A lo largo del presente trabajo se diferencia el allanamiento parcial de la regla de admisión del 130.2 del Código General del Proceso, así como del régimen especial previsto en el proceso laboral por las leyes 18.572 y 18.847. Se concluye que sin perjuicio de ser una actitud del demandado, su eficacia queda supeditada a la existencia de una sentencia que lo declare. Asimismo se estudia la naturaleza jurídica de la sentencia que lo declara y su régimen impugnativo Ponencia admitida en las Jornadas Estudiantiles de Derecho Procesal 2013, celebradas en el Paraninfo de la Universidad de la República el 4 de noviembre de 2013.

[The Bridgelok system for additional retention of bonded prostheses].

Science.gov (United States)

Maroto García, J; Gutiérrez Molero, F; López Montero, M V

1989-04-01

The partial protesis with metal carving and cemented with composite resin is used frequently as a reversible method in order to substitute teeth, due to the light preparation necessary for the original teeth. Recently, a new system (Bridgelok) with pins has been proposed as safer for this kind of protesis. This paper studies if this new system originates a higher resistance compared to other system without pins.

Diligencia de estudantes de graduação de tempo integral e tempo parcial

OpenAIRE

Eliel Unglaub

2003-01-01

Resumo: Este estudo teve por objetivo descrever, discutir e analisar a manifestação de diligência dos estudantes de graduação de Tempo integral e Tempo parcial, em suas múltiplas dimensões, tais como: Disciplina, Conformidade e Responsabilidade, Motivação, Devoção e Espiritualidade e Concentração e Assimilação, em cursos pré-selecionados da UNICAMP. Procurou-se descobrir em que medida outros fatores, tais como: sexo, estado civil, idade, trabalho, turno e renda familiar estão relacionados à d...

TRASTORNOS DE LA ATENCION Y HALLAZGOS ELECTROENCEFALOGRAFICOS EN NIÑOS CON CRISIS PARCIALES COMPLEJAS

OpenAIRE

Aguilar-Fabré, Liane; Rodríguez-Valdés, René

2008-01-01

Los problemas atencionales tienen una alta prevalencia en los niños con epilepsia existiendo muchas interrogantes acerca de su fisiopatología. Caracterizar la atención en un grupo de niños epilépticos. Se estudiaron 12 niños con crisis parciales complejas y se les realizó electroencefalograma y una batería neuropsicológica evaluadora de la atención sostenida, dividida y selectiva. Se realizo un ANOVA no paramétrico U Mann Whitney para conocer la existencia de diferencias significativas entre ...

Lipodistrofia parcial familiar tipo 1: ¿Un síndrome subdiagnosticado o raro?

Directory of Open Access Journals (Sweden)

Jimena Soutelo

2015-02-01

Full Text Available La lipodistrofia parcial familiar de tipo1 (LPF 1 es un síndrome caracterizado por la pérdida parcial de grasa subcutánea en extremidades con distribución incrementada de la misma en rostro, cuello y tronco. Es una identidad familiar aunque hay casos espontáneos. Hasta ahora no se conoce mutación responsable. Se debe realizar diagnóstico diferencial con el síndrome de Cushing. Es un síndrome poco frecuente y en oportunidades se llega al diagnóstico cuando los pacientes presentan complicaciones cardiovasculares o afectación pancreática como consecuencia de una grave alteración metabólica. Se presenta el caso de una paciente de 45 años con diabetes mellitus desde los 20 años de edad, mal control glucémico (HbA1c: 11.7% e hipertrigliceridemia (TG: 3000 mg/dl, índice de masa corporal (IMC: 38, extremidades adelgazadas, pérdida de grasa subcutánea en glúteos, sobreelevación de pliegue por encima de los mismos, venas prominentes en miembros inferiores, cara de luna llena y marcada acantosis nigricans, hipertensión (TA: 150/100 mm Hg y medidas de pliegues subcutáneos disminuidos. El dosaje de leptina fue 16.8 mg/ml. El estudio genético para gen LMNA fue negativo. Se instauraron medidas de cambio de estilo de vida, tratamiento con fenofibrato, insulina premezcla 50/50 y enalapril, obteniéndose una franca mejoría clínica, de la HbA1c (7.8% y de los TG (243 mg/dl.

Reabilitação de selas livres com prótese removível : caracterização e resolução de complicações

OpenAIRE

Ferreira, Nuno Miguel Farias Dias

2015-01-01

Introdução: a reabilitação oral com prótese parcial removível assume um papel muito relevante no restabelecimento das principais funções do sistema estomatognático, em função da prevalência das desdentações parciais numa população cada vez mais envelhecida. Nesta perspetiva, torna-se importante conhecer e caracterizar as principais complicações associadas ao uso de próteses parciais removíveis, por forma a contribuir para a otimização da sua resolução. Objetivos: identificar e caracterizar...

A “história a contrapelo” em Vista parcial da noite, de Luiz Ruffato

Directory of Open Access Journals (Sweden)

Luciane Figueiredo Pokulat

2017-07-01

Full Text Available Pensar o lado avesso da história, remontando fatos com novos olhares, dando voz a atores tradicionalmente emudecidos tem sido uma das tendências da ficção brasileira contemporânea e, a nosso ver, é nesse sentido que se alinha o romance Vista parcial da noite (2006, de Luiz Ruffato. O referido romance faz parte de Inferno provisório (2005-2011, um painel romanesco que objetiva dar voz ao trabalhador brasileiro de classe média baixa, personagem, em geral, pouco representada pela literatura nacional.Considerando a premissa de Walter Benjamin, pensador alemão que em 1940 intuía que o progresso vigente estava prenhe de armadilhas e propunha ao materialista histórico que abordasse o avesso da história e valorizasse a voz dos oprimidos, realizando um processo de “escovar a história a contrapelo”, o intuito desse artigo é apresentar uma leitura de Vista parcial da noite como o avesso da história da modernização de nosso país. Para isso, consideramos, em nossa leitura, o contexto histórico representado no romance – a década de 1970 de regime ditatorial reconhecido pela história oficial como o período de grande progresso e do milagre econômico brasileiro. Queremos investigar como o autor mineiro trabalha a representação das personagens anônimas da história oficial dentro desse contexto social e histórico.

Glosectomía parcial en paciente portador del síndrome de Beckwith-Wiedemann: relato del caso

Directory of Open Access Journals (Sweden)

Victor Diniz Borborema dos Santos

2015-10-01

Full Text Available El síndrome de Beckwith-Wiedemann es una alteración congénita con diversas manifestaciones clínicas, de entre las cuales las más prevalentes son la macroglosia (97%, el gigantismo (88% y los defectos de la pared abdominal (80%. Ortodónticamente, la mayoría de los pacientes presentan mordida abierta anterior y relación de clase III de Angle. La macroglosia puede causar problemas estéticos y anomalías funcionales relacionadas con el habla, la masticación, fonación, deglución y respiración, con potencial de obstrucción de las vías respiratorias superiores y disminución de la estabilidad del tratamiento ortoquirúrgico. Con el fin de evitar episodios como este, es necesaria la realización de una glosectomía parcial en algunos pacientes. El presente trabajo realiza consideraciones con relación al diagnóstico y tratamiento de la macroglosia y relata el caso clínico de un paciente portador del síndrome de Beckwith-Wiedemann que fue intervenido por medio de glosectomía parcial, utilizando la técnica preconizada por Obwergeser et al. (1964 y que en un postoperatorio de 3 años presentó resultados cosméticos y funcionales satisfactorios.

Caracterización parcial de la calmodulina de Plasmodium falciparum

Directory of Open Access Journals (Sweden)

Claudia P. Tinjacá

1995-12-01

Full Text Available Se describe una alternativa para la purificación parcial de Calmodulina (CaM a partir de Plasmodium falciparum que, de acuerdo con anticuerpos monoclonales altamente especificas contra CaM, permite separar por lo menos dos formas de la proteína que, aunque difieren en sus pesos moleculares (una pequeña de 12.600 y otra grande entre 36.000 y 50.000 daltones, son capaces de estimular a la ATPasa de calcio del eritrocito por separado. Se plantea la posibilidad de una modificación estructural de la CaM dePlasmodium falciparum, que no interfiere con su función como activadora de la ATPasa de calcio y que la hace inhibible en menor grado que la CaM de eritrocito en su función estimuladora de la enzima. Lo anterior hace pensar en una mayor afinidad de la proteína del parásito por esta enzima o en una modificación de la zona regulatoria a la que se unen los inhibidores.

Topiramato: uma experiência em crianças com epilepsia parcial

Directory of Open Access Journals (Sweden)

Rocha Cristiane

2001-01-01

Full Text Available Estudamos a resposta clínica ao topiramato (TPM em crianças abaixo de 15 anos de idade. O tratamento foi iniciado com doses de 12,5 mg/kg/dia (1-7 mg/kg/dia, com aumentos semanais de 12,5 mg. Foram estudadadas 11 crianças, 9 do sexo feminino e 2 do masculino, de 3 a 14 anos de idade, com epilepsia parcial associada a etiologias diversas. Apenas um paciente teve dor abdominal intensa. Após o início do TPM, um paciente teve controle total das crises, 5 tiveram melhora maior que 75% na frequência delas, 1 paciente apresentou melhora em 50% e 3 não tiveram controle. Ao final, verificamos controle adequado das crises mesmo em quadros mais graves, com doses de até 100 mg/dia do TPM e em associação a carbamazepina, na maioria dos casos.

Comportamiento de los trabajadores a tiempo parcial desde una perspectiva dinámica: Un análisis para España con datos de la Muestra Continua de Vidas Laborales 2005

Directory of Open Access Journals (Sweden)

Pablo de Pedraza

2008-07-01

Full Text Available Este trabajo tiene como objetivo estudiar las transiciones laborales de los trabajadores a tiempo parcial en España. Para ello, en una primera sección se repasa la literatura existente más relevante para el caso español. En segundo lugar, partiendo de una submuestra de la Muestra Continua de Vidas Laborales 2005b de la Seguridad Social formada por aquellos con algún contrato a tiempo parcial en 2001, se estudian las distintas trayectorias laborales desde 2001 hasta 2005. Ese análisis permite identificar cinco categorías diferentes según hayan seguido trabajando a tiempo parcial, hayan pasado al tiempo completo, al no empleo, a la inactividad o hayan firmado más de un determinado número de contratos. Finalmente, se estiman las probabilidades de encontrarse en uno u otro grupo utilizando como variables explicativas una serie de características del sujeto como el sexo, la edad y la categoría profesional y del sector de trabajo.

297. Resultados de la sustitución parcial del arco aórtico con perfusión del tronco braquiocefálico sin parada circulatoria

Directory of Open Access Journals (Sweden)

J.M. González Santos

2012-04-01

Conclusiones: La sustitución parcial del arco es factible sin necesidad de hacer PCHP. Esta técnica acorta los tiempos quirúrgicos y disminuye sus complicaciones, especialmente el daño neurológico y el sangrado postoperatorio.

Prevalência da Síndrome de Frey após parotidectomia parcial Frey syndrome prevalence after partial parotidectomy

Directory of Open Access Journals (Sweden)

Regiane Cristina Santos

2006-02-01

Full Text Available INTRODUÇÃO: síndrome de Frey é uma seqüela observada após parotidectomia com incidência que varia muito na literatura. O diagnóstico é avaliado pela presença da tríade clássica - sudorese, calor e hiperemia na face, durante a alimentação - e documentado pelo teste com amido e iodo de Minor. OBJETIVO: Avaliar a incidência desta síndrome nos pacientes submetidos à parotidectomia parcial, no Centro de Otorrinolaringologia de Limeira, no período de 1994-2004 e correlacioná-la com os achados clínicos e com a técnica cirúrgica utilizada. MATERIAL E MÉTODO: Quatorze pacientes foram submetidos à parotidectomia parcial com rotação de retalho pediculado do músculo esternocleidomastóideo e responderam a questionário e a seguir foi realizado o teste do iodo, classificando-se os pacientes em positivos e negativos para o teste em um estudo clínico retrospectivo. RESULTADO: Nesta casuística, observamos que 21% dos pacientes após parotidectomia parcial apresentaram positividade para o teste, sendo os mesmos pacientes que apresentaram queixas clínicas ao responderem o questionário. CONCLUSÃO: Somente os pacientes que apresentaram sintomatologia clínica tiveram positividade no teste do iodo, e a técnica cirúrgica empregada foi eficiente no tratamento da patologia da glândula, pois apresentou baixa incidência de acordo com a literatura pesquisada.INTRODUCTION: Frey syndrome is a sequela observed after parotidectomy and the reported incidence varies enormously in the literature. Diagnosis is evaluated by presence of the classic triad of gustatory sweating, heating and flushing while feeding and documented by Minor starch-iodine test. AIM: to evaluate the incidence of this syndrome in patients submitted to partial parotidectomy at Centro Otorrinolaringológico de Limeira, from 1994 to 2004, including presence of signs and symptoms and the surgical technique. MATERIAL AND METHOD: fourteen patients undergoing partial

Purificación y caracterización parcial de la enzima xilanasa a partir del preparado comercial Novoban 240

OpenAIRE

Dalila Paz-Lago; Marta Hernández

2000-01-01

Novoban 240 es un preparado enzimático comercial de la Novo Industri con actividad amilasa, que se obtiene por fermentación sumergida de Bacillus amilolichuefaciens y es utilizado en la industria de elaboración de vinos. Este preparado de uso industrial posee actividad xilanasa, enzima estrechamente relacionada con la respuesta hipersensible de los tejidos vegetales frente al ataque de microorganismos patógenos. En el presente trabajo se establece una metodología de purificación parcial de es...

ESTUDIO DEL IMPACTO TÉCNICO DE MEZCLAS DE CONCRETO HIDRÁULICO POR LA SUSTITUCIÓN PARCIAL DE CEMENTO POR ZEOLITA

Directory of Open Access Journals (Sweden)

I. Miranda Pasos

2014-06-01

Full Text Available La industria de la construcción cada vez más consciente de la necesidad de ejecutar obras con materiales que se obtengan y/o utilicen procesos industriales que minimicen la contaminación y, que contribuyan en el comportamiento de un producto como lo es el concreto hidráulico en la construcción, ha estado buscando alternativas de materiales que sustituyan total o parcialmente al cemento por otro cementante que contamine menos en su procesos de obtención y que conserve las propiedades o las mejore. Una alternativa para sustitución parcial del cemento es la zeolita, es un mineral que se obtiene por proceso de excavación y molienda de puzolana. La norma ASTM-618, define a las puzolanas como materiales silíceo o aluminio-silíceo que por sí solo poseen poco a ningún valor cementante, pero cuando se han dividido finamente y en presencia de agua e hidróxido de calcio (Cal reaccionan químicamente a temperatura ambiente para formar cementantes (Miranda, 2008. Recientemente se ha estudiado el efecto de adicionar mineral Cal-Zeolita para la elaboración del concreto, cuyos resultados son favorables al comportamiento mecánico y su durabilidad (Dopico J.J., et al. 2009. Para la elaboración de morteros para recubrimientos al incorporar arenas zeolíticas como sustituto de la arena tradicional (Tiburcio et al. 2008. El presente proyecto evaluó el comportamiento del concreto hidráulico en estado fresco y endurecido al sustituir de manera parcial cemento por zeolita. Se enfocó a la evaluación del comportamiento mecánico como al diseño de la mezcla de concreto hidráulico fabricado con cemento normal y con cemento-zeolita. Tomando en cuenta los resultados obtenidos, la zeolita incorporada en porcentajes entre el 5% y 10 % tiende a valores de resistencias muy cercanos al concreto normal, los modelos obtenidos así lo corroboran, por lo que se puede concluir la factibilidad de sustitución parcial de cemento por zeolita tomando en cuenta el

Existe lugar para a ventriculectomia parcial esquerda no tratamento da cardiomiopatia dilatada?

Directory of Open Access Journals (Sweden)

Luiz Felipe P. MOREIRA

1998-04-01

Full Text Available A ventriculectomia parcial esquerda tem sido realizada como alternativa ao transplante cardíaco no tratamento das miocardiopatias. Neste trabalho foi analisada a influência desse procedimento sobre a evolução clínica e o comportamento da função ventricular em 37 pacientes portadores de cardiomiopatia dilatada. Métodos: Os pacientes estavam em classe funcional III (16 ou IV (21 no pré-operatório. A ressecção parcial do ventrículo esquerdo (VE foi associada à anuloplastia mitral em 27 pacientes e à substituição mitral em 2. Resultados: Ocorreram 7 (18,9% óbitos hospitalares e os pacientes sobreviventes foram seguidos por período que variou entre 2 e 33 meses (média de 16,2 meses. Outros 9 pacientes faleceram durante os primeiros 6 meses de pós-operatório, por progressão de insuficiência cardíaca (5 ou por eventos relacionados à arritmia (4. A sobrevida atuarial foi de 56,7 ± 8,1% dos 6 aos 30 meses de seguimento. Através de análise unifatorial e de regressão logística foi identificada relação significativa entre o grau de hipertrofia das fibras miocárdicas e o risco de mortalidade após a ventriculectomia parcial, sendo observada sobrevida de 73,6 ± 10,1% em 2 anos para os pacientes operados com diâmetro médio de fibras miocárdicas abaixo de 22. Por outro lado, a classe funcional melhorou nos pacientes sobreviventes de 3,5 ± 0,5 para 1,7 ± 0,9 aos 6 meses de pós-operatório (p Partial left ventriculectomy has been performed as an alternative to heart transplantation in the treatment of severe cardiomyopathies. This study reports the clinical and left ventricular function results of this procedure in 37 patients with dilated cardiomyopathy. Methods: All patients were in class III (16 or IV (21 NYHA. Partial ventriculectomy was associated with mitral annuloplasty in 27 patients and with mitral replacement in two. Results: There were seven operative deaths (18.9% and the surviving patients were followed from 2

Anestesia venosa total para laringectomia parcial em paciente na 28ª semana de gestação: relato de caso

OpenAIRE

Costa, José; Mendes, Dalva Maria Carvalho; Lobo, José Eduardo de Oliveira; Furuguem, Adriana Barrozo Ribeiro; Santos, Gabriel Gilberto

2005-01-01

JUSTIFICATIVA E OBJETIVOS: Uma anestesia para paciente gestante constitui um desafio ao anestesiologista em virtude dos riscos para a mãe e para o feto. São muitas as complicações descritas pela literatura como malformações fetais, parto prematuro, instabilidade hemodinâmica materna e até morte fetal. O objetivo deste caso é mostrar uma paciente gestante de 28 semanas, submetida a laringectomia parcial sob anestesia geral venosa total com propofol, remifentanil e cisatracúrio. RELATO DO CASO:...

Review of laparoscopic partial nephrectomy in the treatment of renal tumors, T1 stadium in adults; Revision de la nefrectomia parcial laparoscopica en el tratamiento de los tumores renales, estadio T1 en adultos

Energy Technology Data Exchange (ETDEWEB)

Zamora Montes de Oca, Maria Jose

2012-07-01

The T1 renal cancer in adults is made known; incidence, characteristics and management. Renal cell carcinoma has been the most common malignancy of the kidney, percentage is close to three percent of solid tumors of adults. The treatments for this tumor are analyzed: open radical nephrectomy, laparoscopic radical nephrectomy, open partial nephrectomy and laparoscopic partial nephrectomy. Laparoscopic partial nephrectomy has represented an alternative option acceptable, safely and with good oncological and surgical outcomes for patients, as it is used to conserve nephrons and simultaneously to resect the tumor of a complete form promoting in the future the patient present a good renal function. Additionally, a adequate oncological control has reduced the risk of submit postoperative renal failure. An evolution of laparoscopic partial nephrectomy is presented determining the procedure for renal tumors in state T1 in the adults [Spanish] El cancer renal T1 en adultos es dado a conocer; su incidencia, caracteristicas y manejo. El carcinoma de celulas renales ha sido la malignidad mas comun de los rinones, su porcentaje se acerca al tres porciento de los tumores solidos de los adultos. Los tratamientos para combatir ese tumor son analizados: nefrectomia radical abierta, nefrectomia radical laparoscopica, nefrectomia parcial abierta y nefrectomia parcial laparoscopica. La nefrectonomia parcial laparoscopica ha representado una opcion alternativa aceptable, segura y con buenos resultados oncologicos y quirurgicos para los pacientes, ya que es utilizada para conservar nefronas y a la vez poder resecar el tumor de una forma completa promoviendo en el futuro que el paciente presente un buen funcionamiento renal. Ademas, un adecuado control oncologico ha reducido el riesgo de presentar insuficiencia renal postoperatoria. Una evolucion de la nefrectonomia parcial laparoscopica es presentada determinando el procedimiento para tumores renales en estado T1 en los adultos.

Eclipse parcial de Luna - 23-24 de Marzo de 1997

Science.gov (United States)

Arquiola, A. P.; Arquiola, F. E.

Luego de varios años en que las condiciones climáticas no nos permitían registrar el fenómeno, pudimos observar y realizar secuencias fotográficas del eclipse parcial Luna. Siendo de una magnitud de 0.92 (muy cercano a la totalidad) se obtuvo una serie de fotografías muy claras y preferentemente con gran contraste a fin de destacar las tonalidades de las sombras, en especial la penumbra, que desde ya el clima nos favoreció. Los métodos fotográficos fueron, en primer lugar, con telezoom de 210mm a f/4.5 con película color de 1600 ASA; y el ya clásico método a foco primario en el Telescopio Schmidt - Cassegrain de 200mm a f/10. Paralelamente a la observación del eclipse, estábamos al instante comunicados por correo electrónico con otros observadores desde diferentes lugares del mundo intercambiando reportes, y también usuarios en general de la red, de esta forma se hizo muy especial el fenómeno. Instrumentos utilizados : Telescopio Schmidt-Cassegrain 200mm f/10, Cámara fotográfica Minolta con Telezoom 210mm f/4.5, Película 1600 ASA color, Telescopio Refractor 80mm a f/15

Substituição parcial do milho por fontes energéticas para bovinos de corte em pastejo

Directory of Open Access Journals (Sweden)

Adriano Borges Cardoso

2013-09-01

Full Text Available O objetivo deste trabalho foi avaliar o efeito da substituição parcial do milho por fontes energéticas alternativas, em suplementos concentrados para bovinos de corte mantidos em pasto de Urochloa brizantha cultivar Marandu, durante o período das águas, no consumo e na digestibilidade aparente total dos alimentos. Foram utilizados cinco bovinos Nelore com peso médio corporal inicial de 367,8±4,31 kg. Utilizou-se o delineamento experimental quadrado latino 5x5, com cinco animais e cinco tratamentos. Foram avaliados: suplementos concentrados isoproteicos, com 30% de proteína bruta, formulados à base de grãos de milho, de milheto e de sorgo, e casca de soja; e um suplemento mineral (controle. Não foram observadas diferenças significativas no consumo de matéria seca (MS total e de matéria orgânica (MO entre os animais que receberam suplementação mineral e os que receberam suplementação concentrada; no entanto, estes últimos apresentaram menor (12,28% consumo de MS de pasto. A suplementação concentrada aumentou o coeficiente de digestibilidade aparente total da MS, da MO, da proteína bruta e dos carboidratos não fibrosos que não foram influenciados pelas fontes de energia. Os grãos de milheto e de sorgo e a casca de soja podem ser utilizados em substituição parcial ao milho, na formulação de suplementos concentrados, sem prejudicar o consumo e a digestibilidade dos nutrientes da dieta.

BALANCE PARCIAL DE NITRÓGENO EN EL SISTEMA DE CULTIVO DE MAÍZ (Zea mays L. CON COBERTURA DE LEGUMINOSAS EN CHIAPAS, MÉXICO

Directory of Open Access Journals (Sweden)

José David Álvarez-Solís

2016-01-01

Full Text Available El potencial de las leguminosas para mejorar la fertilidad del suelo y sostener la producción de cultivos asociados como el maíz, varía entre especies. Este trabajo evalúa la contribución de 3 leguminosas como cultivos de cobertura (CC en el balance parcial de Nitrógeno (N en el cultivo de maíz. Fue realizado en Ejido La Bella Ilusión, Maravilla Tenejapa, estado de Chiapas, México, con 4 tratamientos en asociación al cultivo de maíz: 1 frijol nescafé (Mucuna pruriens, 2 frijol arroz (Vigna umbellata, 3 frijol común (Phaseolus vulgaris y 4 testigo sin leguminosa. Se midió la producción de biomasa y el contenido de N, en las leguminosas y el maíz. Se hizo un balance parcial de N, que consideró el suministro de N de la biomasa de leguminosas y la extracción de N en la cosecha del maíz. La producción de biomasa seca de las leguminosas en la cosecha fue significativamente (p≤0,05 mayor en asociación con los frijoles arroz y nescafé (1290 y 1139 kg.ha-1 que en frijol común (470 kg.ha-1, con un contenido total de 35,4; 25,7 y 8,9 kg.ha-1 N, respectivamente. El rendimiento de grano de maíz fue 2390,5 kg.ha-1; se identificó que la extracción de N fue mayor en el grano, seguido de rastrojo, raíz, bráctea y olote, con 20,9; 9,4; 7,2; 2,0 y 1,5 kg.ha-1 N, respectivamente. El balance parcial de N mostró valores positivos con los frijoles arroz y nescafé, lo que indica su importancia para compensar la extracción de N del grano o de la mazorca del maíz.

O n-butil cianoacrilato na lobectomia pulmonar parcial em felinos: estudo experimental The n-butyl cyanoacrilate in partial lung lobectomy in cats: experimental study

Directory of Open Access Journals (Sweden)

Marcos Makoto Ishizaki

2005-02-01

Full Text Available O presente estudo teve como objetivo verificar a viabilidade do n-butil cianoacrilato na pneumostasia e hemostasia em lobectomia pulmonar parcial. Foram utilizadas seis gatas hígidas, adultas, com peso médio de três quilogramas. O procedimento cirúrgico consistiu na realização de toracotomia intercostal com lobectomia pulmonar parcial em que se utilizou adesivo cirúrgico para fechamento do lobo pulmonar. Após 21 dias da cirurgia, os animais foram novamente submetidos à toracotomia para a coleta de fragmento da região onde o adesivo fora aplicado, para análise histopatológica. Foram realizadas radiografias de tórax das pacientes para o acompanhamento pré e pós lobectomia pulmonar parcial e, aos dois, sete, 14 e 21 dias subseqüentes. As alterações radiográficas e clínicas encontradas como pneumotórax residual, aumento na densidade pulmonar, enfisema subcutâneo e apatia foram corrigidas em tempo hábil, não comprometendo os resultados do estudo. A histopatologia evidenciou reação inflamatória com predomínio de células mononucleares, neovascularização, proliferação de tecido conjuntivo e pequenas áreas de enfisema e atelectasia, sem comprometimento clínico significativo. Concluiu-se que o cianoacrilato é capaz de produzir adequada pneumostasia e hemostasia, e poderá ser uma opção para a realização de lobectomia pulmonar parcial em felinos.The n-butyl cyanoacrilate tissue adhesive was used in this study aiming to verify the viability of its use for hemostasis and to avoid air leakage in partial lung lobectomy. Six healthy adult female domestic shorthair cats, weight range of three kg were submitted to an intercostal thoracotomy with partial lung lobectomy using n-butyl cyanoacrilate to close the lobe. After 21 days they were submitted to another thoracotomy to collect a fragment of the lung where the adhesive was applied to a histopathological study. Chest films were taken pre and post partial lung lobectomy

Reconstrucción de una pérdida parcial del pabellón auricular por trauma

Directory of Open Access Journals (Sweden)

Denia Morales Navarro

Full Text Available La posición expuesta de la oreja la hace vulnerable a muchos tipos de lesiones, entre las que se encuentran los traumas. Nuestro propósito es presentar un caso clínico en el que se realizó la reconstrucción de una pérdida parcial del pabellón auricular por trauma. Acude al cuerpo de guardia del Hospital Universitario “General Calixto García” un paciente masculino de 42 años refiriendo haber perdido un fragmento de oreja en una riña. Se decide realizar hemostasia y fijación mediante puntos de sutura del pabellón auricular remanente a la región temporal, previa incisión en la zona. A los 3 meses del evento traumático se reevalúa con fines de realizar la planificación preoperatoria reconstructiva. Se decide la realizarla mediante injerto de cartílago costal colocado en forma de “bolsillo” en la región temporal. Al mes de esta última intervención quirúrgica se realiza, bajo anestesia local, la liberación de la región auricular, el avance de un colgajo temporal y la colocación de un injerto libre de piel en la cara posterior del área reconstruida. Se observa una excelente evolución posoperatoria. El paciente refirió una gran satisfacción por los resultados estéticos obtenidos. En este caso se empleó una secuencia diagnóstica y terapéutica, según elección de los cirujanos involucrados, ante un defecto traumático parcial del pabellón auricular en sus tercios superior y medio. Este tipo de secuela traumática requirió el empleo de procederes quirúrgicos en varios tiempos operatorios que garantizaran un buen aporte sanguíneo de los tejidos y adecuados resultados estéticos finales.

Limpieza de patrones φ,q,n de descargas parciales; Denoising of partial discharge φ,q,n patterns

Directory of Open Access Journals (Sweden)

Santiago Alfredo Dorrbercker Drake

2015-04-01

Full Text Available La medición de descargas parciales (DP se sustenta en la detección y filtraje de pulsos de corriente que aparecen en una banda de frecuencia que abarca desde los kilohertzios hasta los gigahertzios, por tal motivo los detectores de descargas parciales (DDP poseen sistemas para desagregar dichos pulsos de corriente. Sin embargo, los DDP también permiten el paso de otras señales de alta frecuencia (ruidos que se mezclan con los pulsos de DP y afectan la medición, interpretación y caracterización de las DP. Para atenuar ese efecto, se han desarrollado distintas técnicas para separar los ruidos tanto asociados a las señales como los existentes en los patrones φ,q,n.  En este artículo se presentan los resultados obtenidos en la reducción de los ruidos asociados a la conmutación de tiristores y los ruidos esporádicos, de los patrones φ,q,n mediante el empleo de técnicas de procesamiento de imágenes digitales. The measurement of partial (PD discharges is sustained in the detection and filtration of current pulses which appear in a band of frequency that include from the kilohertz until the gigahertzios, for such a reason the detectors of partial (PDD discharges they possess systems for the separation of this current pulses. However, PDD also allows the step of other signals of high frequency, denominated noises, that mix with the pulses of PD and they affect measurement, interpretation and characterization of PD. To attenuate that effect, different techniques have been developed to separate the noises so much associated to the signs like the existent ones in the φ,q,n patterns. In this paper are presented the results obtained in the noise reduction of the noises associated to the thyristor’s commutation and the sporadic noises, in the φ,q,n patterns by means of the technical of digital images processing

Presión: aprende a utilizar correctamente la presión atmosférica, total, manomérica, parcial y de vapor

OpenAIRE

Fernandez-Torres, Maria J.

2010-01-01

Participan: Voz: Dra. María José Fernández Torres; Colaboran: Dra. María Dolores Saquete Ferrándiz y Dr. Francisco Ruiz Beviá. En este vídeo se explican los conceptos de PRESIÓN ATMOSFÉRICA, PRESIÓN TOTAL, PRESIÓN MANOMÉTRICA, PRESIÓN PARCIAL y PRESIÓN DE VAPOR. A su vez, se muestra la relación entre algunos tipos de presiones y se insiste que la PRESIÓN DE VAPOR es la única de todas ellas que es función de estado.

Anestesia venosa total para laringectomia parcial em paciente na 28ª semana de gestação: relato de caso Anestesia venosa total para laringectomía parcial en paciente en la 28ª semana de embarazo: relato de caso Total intravenous anesthesia for partial laryngectomy in 28 weeks pregnant patient: case report

OpenAIRE

José Costa; Dalva Maria Carvalho Mendes; José Eduardo de Oliveira Lobo; Adriana Barrozo Ribeiro Furuguem; Gabriel Gilberto Santos

2005-01-01

JUSTIFICATIVA E OBJETIVOS: Uma anestesia para paciente gestante constitui um desafio ao anestesiologista em virtude dos riscos para a mãe e para o feto. São muitas as complicações descritas pela literatura como malformações fetais, parto prematuro, instabilidade hemodinâmica materna e até morte fetal. O objetivo deste caso é mostrar uma paciente gestante de 28 semanas, submetida a laringectomia parcial sob anestesia geral venosa total com propofol, remifentanil e cisatracúrio. RELATO DO CASO:...

Efeito do omeprazol e do pantoprazol sobre a regeneração hepática após hepatectomia parcial em ratos Effect of omeprazole and pantoprazole on liver regeneration after partial hepatectomy in rats

Directory of Open Access Journals (Sweden)

Gustavo Barreto de Melo

2003-12-01

Full Text Available OBJETIVO: Avaliar os efeitos do omeprazol e do pantoprazol sobre a regeneração hepática após hepatectomia parcial. MÉTODOS: Cinqüenta e oito ratos Wistar machos foram divididos em 4 grupos: Grupo SHAM, Grupo HP, Grupo PANTO e Grupo OMEP. Eles foram submetidos a hepatectomia parcial de 67% (Grupos HP, PANTO e OMEP ou laparotomia (Grupo SHAM. Os fígados foram removidos 32 e 56 horas após a operação. Depois, os animais foram sacrificados. Em todos os grupos, as substâncias (solução salina, omeprazol e pantoprazol foram aplicadas diariamente a partir do momento em que foram operados até o sacrifício. RESULTADOS: O índice de mitose no Grupo SHAM não foi significativo. Trinta e duas horas após a hepatectomia, a contagem de mitoses foi de 1,2 ± 1,09 para o Grupo HP, 1,2 ± 1,6 para o Grupo OMEP e 2,6 ± 3,2 para o Grupo PANTO. Na análise após 56 horas, os valores foram 1,6 ± 0,89 para o HP, 2 ± 1,8 para o OMEP e 2,6 ± 0,54 para o PANTO. Esses resultados não foram estatisticamente significativos. CONCLUSÃO: O omeprazol e o pantoprazol, agentes inibidores da bomba de prótons (H+, K+-ATPase, não interferem na regeneração hepática 32 e 56 horas após hepatectomia parcial a 67% em ratos.PURPOSE: To assess the effects of omeprazole and pantoprazole on liver regeneration after partial hepatectomy. METHODS: Fifty eight male Wistar rats were divided into 4 groups: SHAM, HP, PANTO and OMEP Groups. They were submitted to 67% partial hepatectomy (HP, PANTO and OMEP Groups or laparotomy (SHAM Group. Their livers were removed 32 and 56 hours after the operation. Then, the animals were sacrificed. In all groups, the substances (saline solution, omeprazole and pantoprazole were injected once daily from the moment they were operated on until the time of sacrifice. RESULTS: In SHAM Group the mitotic index was not significant. Thirty two hours after hepatectomy, the mitosis index was 1.2 ± 1.09 in HP Group, 1.2 ± 1.6 in OMEP Group and 2

Cinética de segregación de soluto a las dislocaciones parciales en Cu-5 % at. Mn

Directory of Open Access Journals (Sweden)

Donoso, E.

1999-02-01

Full Text Available A model is proposed to describe, the kinetics of solute segregation to partial dislocations in solid solutions of cold-rolled alloys. The case for half-edge and half-screw dislocations is considered. The model gives account of the kinetic behaviour observed in a deformed Cu-5 at. % Mn alloy where two unknown processes were assessed during calorimetric isothermal experiments. The faster process corresponds to segregation to screw dissociated dislocations while the slower one corresponds to segregation to edge dissociated dislocations. Effective activation energies, larger for edge dislocations, are close to that for pipe diffusion along the partials corrected by pinner binding energy terms. It is also predicted that segregation occurs faster as the dislocation density is increased.

Se propone un modelo para describir la cinética de segregación de soluto a las dislocaciones parciales en soluciones sólidas de aleaciones deformadas en frío. Se considera el caso en que la mitad de las dislocaciones son en arista y la otra mitad helicoidales. El modelo da cuenta del comportamiento cinético observado en aleaciones de Cu-5% at. Mn, durante las experiencias calorimétricas isotérmicas donde fueron estimados dos procesos. El proceso más rápido corresponde a segregación a las dislocaciones disociadas helicoidales, mientras que el más lento corresponde a la segregación a las dislocaciones disociadas en arista. Las energías efectivas de activación, las cuales son mayores para dislocaciones en arista, resultan ser cercanas a aquellas para la difusión tubular a lo largo de las componentes parciales, corregidas por términos de energía de interacción de anclaje. Se predice también que la segregación es más rápida cuando la densidad de dislocaciones aumenta.

Effects of partial hepatectomy on the distal ileum in rats Estudio de las repercusiones en el íleon distal de la resección hepática parcial en la rata

Directory of Open Access Journals (Sweden)

M. B. Rodríguez Sanz

2004-03-01

Full Text Available Introduction: hepatectomy, both partial resection and transplant, has greatly developed and advanced during the last years as a result of a better understanding of surgical anatomy and the progress of technological means; it has also allowed a widening of surgical indications, including living-donor liver transplantation. The aims of our study was to assess the morphological impact of partial hepatectomy on the distal ileum, since the liver and intestine behave as a unit from an anatomical, functional, and metabolic point of view. Material and methods: twenty-four Wistar rats were used; they were divided into two groups, a control and an experimental group (30, 90, and 180 days. We studied changes occurred in the distal ileum after a 70% liver resection, taking 4 parameters into account. Results: an important drop in total thickness occurred at the ileum wall in the experimental group (p Introducción: la cirugía hepática, tanto la resección parcial como el trasplante se ha desarrollado y ha avanzado enormemente en los últimos años, gracias al mayor conocimiento de la anatomía quirúrgica y al progreso de los medios tecnológicos, permitiendo ampliar cada vez más las indicaciones quirúrgicas incluyendo el trasplante hepático de donante vivo. Nuestro objetivo es estudiar las repercusiones morfológicas que la hepatectomía parcial produce sobre el íleon distal, ya que el hígado y el intestino se comportan como una unidad anatómica, funcional y metabólica. Material y métodos: se han utilizado 24 ratas de la raza Wistar divididas en 2 grupos, el grupo control y el grupo experimental (30, 90 y 180 días. Se han estudiado los cambios en el íleon distal después de una hepatectomía parcial del 70%, valorando 4 parámetros. Resultados: se produce una disminución significativa de la altura total de la pared del íleon en el grupo experimental (p<0,001. La altura de la vellosidad no tuvo diferencias significativas respecto al grupo

Transposición de grandes arterias asociado a drenaje venoso anómalo parcial: reparación «uno y medio»

Directory of Open Access Journals (Sweden)

Judit Llevadias

2007-07-01

Full Text Available Presentamos el caso de un lactante de 8 meses con una cardiopatía congénita compleja consistente en transposición de grandes arterias y retorno venoso anómalo parcial de venas pulmonares superior y media derecha a vena cava superior. La clínica consistía en fallo cardíaco congestivo, desnutrición y cianosis importante. El diagnóstico se estableció en la intervención. Se realizó corrección fisiológica de las dos cardiopatías con buen resultado y con resolución de la sintomatología.

Drenaje venoso pulmonar anómalo parcial del pulmón izquierdo. Corrección mediante toracotomía sin circulación extracorpórea

Directory of Open Access Journals (Sweden)

Gustavo Brochet, MD

2014-01-01

Full Text Available Se describen dos casos de drenaje venoso pulmonar anómalo parcial del pulmón izquierdo a la vena vertical, la cual drena a su vez a la vena innominada, en dos niños de 6 y 8 años respectivamente. Se exponen el cuadro clínico, los hallazgos del cateterismo, la evolución clínica y el resultado postquirúrgico; adicionalmente, se hace una revisión de la literatura.

Efeito da deferoxamina na isquemia e reperfusão do fígado remanescente após ressecção hepática parcial

Directory of Open Access Journals (Sweden)

Brisotti João Luiz

2000-01-01

Full Text Available Particularmente, a utilização de vários tipos de drogas que diminuem os efeitos deletérios do binômio isquemia-reperfusão, tem tornado-se foco de vários estudos experimentais visando possíveis aplicações clínicas. O objetivo do presente estudo foi avaliar os efeitos da deferoxamina na isquemia e reperfusão sobre o fígado remanescente após ressecção hepática parcial a 70%, avaliando-se váriáveis bioquímicas do sangue: aspartato aminotransferase e alanina aminotransferase;.A amostra de 34 ratos foi dividida em grupos: Grupo HP (n = 8 - submetidos a hepatectomia parcial (HP a 70%; Grupo HPD (n = 4 - submetidos a administração de deferoxamina (40 mg/kg e HP a 70%; Grupo HPI (n = 7 - hepatectomizados (HP a 70% e submetidos a isquemia (40 minutos; Grupo HPID (n = 7 - semelhante ao anterior, porém recebendo previamente deferoxamina; Grupo C (n = 8 - controle, submetido a operação simulada para HP a 70%. A análise estatística entre os diversos grupos foi feita pelos testes de Kruskal - Wallis e de Mann - Whitney, com nível de significância de 5%. Portanto, houve aumento significativo das aminotransferases nos animais submetidos a hepatectomia e a isquemia. Esse aumento foi inibido pela deferoxamina.

Imágenes ecográficas de la mola hidatiforme parcial en el segundo trimestre del embarazo Ultrasound imaging of partial hydatidiform mole in the second trimester of pregnancy

Directory of Open Access Journals (Sweden)

Marina Jover Labiste

2012-01-01

Full Text Available Se describe el caso clínico de una paciente de 27 años de edad y 18 semanas de gestación, ingresada en el Servicio de Obstetricia del Hospital Ginecoobstétrico Provincial "Mariana Grajales Coello" de Santiago de Cuba, por presentar cifras tensionales elevadas, cefalea y dolor en bajo vientre. Los exámenes complementarios efectuados confirmaron que se trataba de una mola hidatiforme parcial, por lo cual se legró la cavidad uterina y se extrajeron pequeños fragmentos de estroma endometrial para estudio anatomopatológico. Se indicó seguimiento médico por consulta externa y se citó a los 21 días para el control y la evaluación de su estado general.The case report of a 27 year-old patient with 18 weeks gestation, admitted to the Obstetrics Department of "Mariana Grajales Coello" Provincial Gynecology and Obstetrics Hospital of Santiago de Cuba due to high blood pressure, cephalea and pain in lower abdomen is described. Additional tests confirmed a partial hydatidiform mole, so that uterine curettage was performed and small fragments of endometrial stroma were removed for pathological study. Outpatient medical monitoring was recommended and the patient had an appointment at 21 days for controlling and evaluating her general state.

Efecto del almacenamiento al ambiente en semillas de Leucaena leucocephala cv. Cunningham sometidas a hidratación parcial Effect of storage under ambient conditions on seeds from Leucaena leucocephala cv. Cunningham subject to partial hydration

Directory of Open Access Journals (Sweden)

Yolanda González

2012-12-01

Full Text Available El objetivo del trabajo fue estudiar el efecto del almacenamiento al ambiente en la germinación de las semillas de Leucaena leucocephala cv. Cunningham sometidas a hidratación parcial. Los tratamientos fueron: control, sin escarificación (T0; escarificación térmica (ET con H2O a 80°C, durante dos minutos (T1; ET más hidratación parcial, en bandeja con agua corriente por 28 horas (T2; ET más hidratación parcial, en saco de yute humedecido con agua corriente por 28 horas (T3; ET más hidratación parcial, en bandeja con agua corriente y TMTD al 0,1% (plaguicida por 28 horas (T4; ET más hidratación parcial, en saco de yute humedecido con agua corriente y TMTD al 0,1% (plaguicida por 28 horas (T5. Las semillas hidratadas se deshidrataron durante 72 horas al aire y a la sombra, antes de almacenarlas. Se midió la germinación y la viabilidad a 0, 1, 2, 3, 4, 6, 18, 30 y 42 meses. Se utilizó un diseño totalmente aleatorizado y cuatro réplicas por tratamiento. Hubo diferencias significativas (PThe objective of the work was to study the effect of storage under ambient conditions on the germination of seeds from Leucaena leucocephala cv. Cunningham subject to partial hydration. The treatments were: control, no scarification (T0; thermal scarification (TS with H2O at 80ºC, for two minutes (T1; TS plus partial hydration, on tray with tap water for 28 hours (T2; TS plus partial hydration, in jute sac moist with tap water for 28 hours (T3; TS plus partial hydration in tray with tap water and TMTD at 0,1% (pesticide for 28 hours (T4; TS plus partial hydration, in jute sac moist with tap water and TMTD at 0,1% (pesticide for 28 hours (T5. The hydrated seeds were dehydrated during 72 hours exposed to air and under shade, before being stored. Germination and viability were measured after 0, 1, 2, 3, 4, 6, 18, 30 and 42 months. A completely randomized design and four replications per treatment were used. There were significant differences (P<0

La incorporación de las mujeres al espacio público y la ruptura parcial de la división sexual del trabajo: el tratamiento de la conciliación de la vida familar y laboral y sus consecuencias en la igualdad de género

OpenAIRE

Nuño Gómez, Laura

2008-01-01

En esta investigación se parte de la premisa de que el reconocimiento de la igualdad formal de las mujeres representó una ruptura parcial del diseño dicotómico de la sociedad civil que establecía una división del trabajo (público-privado) en función del sexo de cada persona. El objetivo de esta investigación es demostrar que la incorporación de las mujeres al espacio público supuso una reforma parcial de la sociedad civil que si bien modificó la división sexual del trabajo en el espacio públ...

Morus alba o Hibiscus rosa-sinensis como sustituto parcial de soya en dietas integrales para conejos

Directory of Open Access Journals (Sweden)

P. E. Lara

2012-01-01

Full Text Available Los conejos pueden aprovechar los nutrientes contenidos en los forrajes y subproductos agrícolas eficientemente gracias a la fermentación cecal y a la cecotrofía. Los objetivos del presente trabajo fueron: evaluar la tasa de crecimiento y el rendimiento de la canal en conejos alimentados con minibloques de harina de morera (Morus alba o tulipán (Hibiscus rosa-sinensis en sustitución parcial de pasta de soya; y determinar el consumo y digestibilidad de la dieta. Para esto, se utilizaron 18 conejos de 30 días de edad, distribuidos al azar en tres dietas experimentales (n=6, ac (alimento convencional, mbm (minibloque con 30% de morera y, mbt (minibloque con 27% de tulipán, durante nueve semanas. La ganancia diaria y el rendimiento en canal fue mejor (p0.10 en los tres grupos. Es factible sustituir parcialmente la proteína de la soya por harina de hojas de morera o tulipán, aunque presentan una menor respuesta productiva con respecto a la alimentación convencional.

BALANCE PARCIAL DE NITRÓGENO EN EL SISTEMA DE CULTIVO DE MAÍZ (Zea mays L.) CON COBERTURA DE LEGUMINOSAS EN CHIAPAS, MÉXICO

OpenAIRE

José David Álvarez-Solís; Ramón Muñoz-Arroyo; Esperanza Huerta-Lwanga; José Nahed-Toral

2016-01-01

El potencial de las leguminosas para mejorar la fertilidad del suelo y sostener la producción de cultivos asociados como el maíz, varía entre especies. Este trabajo evalúa la contribución de 3 leguminosas como cultivos de cobertura (CC) en el balance parcial de Nitrógeno (N) en el cultivo de maíz. Fue realizado en Ejido La Bella Ilusión, Maravilla Tenejapa, estado de Chiapas, México, con 4 tratamientos en asociación al cultivo de maíz: 1) frijol nescafé (Mucuna pruriens), 2) frijol arroz (Vig...

Análise dialélica parcial em gerações avançadas para seleção de populações segregantes de trigo

Directory of Open Access Journals (Sweden)

Adérico Júnior Badaró Pimentel

2013-12-01

Full Text Available O objetivo deste trabalho foi estimar, em gerações avançadas, os efeitos da capacidade geral e específica de combinação de genitores de trigo, bem como selecionar populações segregantes superiores. Doze genitores e suas 36 populações nas gerações F2 e F3, obtidas em arranjo de dialelo parcial, foram avaliados quanto à produtividade de grãos. Utilizou-se o delineamento em látice 7x7, com duas repetições, mais um tratamento para completar o látice. O efeito de capacidade geral de combinação foi significativo, nas duas gerações. Observou-se alta correlação (0,83 dos efeitos de capacidade geral de combinação entre gerações, mas inexpressiva influência dos efeitos de gerações e de anos na classificação dos cruzamentos. As populações provenientes do cruzamento entre os genitores BRS 254, BRS 264 e IAC 364 (Tucuruí III e os genitores MGS 1 Aliança, VI 98053 e UFVT 1 Pioneiro apresentam maior potencial para obtenção de linhagens superiores, quanto à produtividade de grãos. O uso da análise dialélica parcial em gerações avançadas é promissor para programas de melhoramento de trigo por hibridação.

Laparoscopic partial nephrectomy in rats Nefrectomia parcial laparoscópica em ratos

Directory of Open Access Journals (Sweden)

Fernando Meyer

2007-04-01

Full Text Available PURPOSE: To establish an experimental model of laparoscopic partial nephrectomy (LPN in rats and to analyze morphological alterations in the renal parenchyma utilizing an electric cautery and harmonic scalpel. METHODS: Forty Wistar rats were used, divided in 2 experiments with 20 rats each: experiment I, LPN was performed with an electric cautery and the rats were subdivided into groups A and B; experiment II, LPN was performed with a harmonic scalpel and they were subdivided into groups C and D. The animals in groups A and C were sacrificed shortly after surgery and the remnant kidney was removed to study the following variables: necroses and degeneration. In groups B and D a laparatomy was performed for retrieval of the remnant kidney on the 14th day after surgery to analyze fibrous scarring. RESULTS: For the variables necroses and fibrous scarring, the electric cautery creates, on average, greater width than that produced by the harmonic scalpel (p=0.0002 and p=0.0068 respectively. Regarding the variable of degeneration, we found no significant difference between the two types of scalpels (p=0.1267. CONCLUSIONS: LPN in rats is an adequate and feasible experimental model. The electric cautery caused greater damage to remnant renal tissue when compared to harmonic scalpel.OBJETIVO: Estabelecer um modelo experimental de nefrectomia parcial laparoscópica (NPL em ratos e analisar as alterações morfológicas no parênquima renal utilizando-se bisturi elétrico e harmônico. MÉTODOS: Foram utilizados 40 ratos Wistar, distribuídos em dois experimentos com 20 ratos cada: experimento I, NPL utilizando-se de bisturi elétrico e subdividindo-se os ratos em grupos A e B; experimento II, NPL realizada com bisturi harmônico e subdividindo-se os ratos em grupos C e D. Os animais dos grupos A e C foram sacrificados após a cirurgia para a remoção do rim operado e estudo das seguintes variáveis: necrose e degeneração. Nos grupos B e D a laparotomia

Obtención y caracterización parcial de un extracto lipídico de la membrana externa de Mycobacterium smegmatis

Directory of Open Access Journals (Sweden)

Nadine Alvarez

2009-04-01

Full Text Available En la actualidad, los antígenos lipídicos de las micobacterias constituyen blancos atractivos para el desarrollo de nuevas formulaciones vacunales contra la tuberculosis. En nuestro trabajo se realizó la caracterización parcial de un extracto lipídico de pared celular de Mycobacterium smegmatis mediante cromatografía de capa delgada y Dot blot frente a gammaglobulina humana. Se identificó, fundamentalmente, la presencia de fosfolípidos y ácidos micólicos en el extracto lipídico y se observó un elevado reconocimiento de los mismos por la gammaglobulina humana, lo cual indica la importancia de continuar los estudios de inmunoprotección empleando antígenos lipídicos de micobacterias.

Evaluación del diseño de la prótesis parcial removible de cromo cobalto en laboratorios de la ciudad de Quito, años 2016-2017

OpenAIRE

Sosa Guzmán, Juan José

2017-01-01

The partial removable prosthesis is a rigid device that can be removed easily from the mouth of patient, providing an effective treatment alternative for partial edentulous patients, restoring the esthetics and lost functions. Design of prosthesis is very important for success, it will define the shape of the device, the constituent elements, and the way in which the occlusal forces will be distributed to the antagonist. The objective of the present research is evaluation of design removable ...

Item Vetoes and Attempts to Override Them in Multiparty Legislatures Vetos parciales e intentos de insistencia en legislaturas multipartidistas

Directory of Open Access Journals (Sweden)

Valeria Palanza

2013-01-01

Full Text Available This paper analyzes the dynamics of vetoes and veto overrides in the context of a multiparty legislature using an original dataset from the period 1983–2007 in Argentina. We argue that the President can use an “item” or “partial” veto to selectively delete articles, while keeping enough distributive goods in the bill to break up the coalition responsible for its passage, thereby eliminating support for an override. Our research reveals that total vetoes – which affect all legislators equally – are more likely to be overridden than partial vetoes. Contradicting the received wisdom that in multiparty legislatures override attempts are more likely under a divided government, we find that override attempts are more likely in plurality governments. We use case analyses to illustrate the main arguments developed in this paper.El trabajo estudia las dinámicas desatadas por la práctica del veto presidencial e insistencias del congreso, en el contexto de legislaturas multipartidarias, a través del análisis de una base de datos original que abarca el período 1983-2007 en Argentina. El trabajo argumenta que el presidente puede usar el veto parcial para quitar del texto, en forma selectiva, artículos puntuales, dejando al mismo tiempo en el texto bienes distributivos suficientes como para romper la coalición responsable de la aprobación del proyecto, de manera tal de eliminar la posibilidad de una insistencia. La investigación revela que los vetos totales, que afectan por igual a todos los legisladores, son más factibles de ser insistidos que los vetos parciales. En contra de lo sostenido al momento acerca de que en legislaturas multipartidarias los intentos de insistencia son más factibles bajo gobierno dividido, este trabajo encuentra que son más factibles cuando el gobierno cuenta con al menos una pluralidad en una de las cámaras. Además del análisis cuantitativo, presentamos estudios de casos para ilustrar los argumentos

Efeito do período experimental sobre a digestão parcial e total em bovinos alimentados com dois níveis de volumosos Effect of experimental periods on the parcial and total digestion in cattle fed two levels of forage

Directory of Open Access Journals (Sweden)

Kátia Cylene Guimarães

2001-06-01

Full Text Available Os objetivos deste trabalho foram avaliar os efeitos de dois períodos experimentais e dois níveis de volumosos na dieta sobre a digestibilidade total e parcial da matéria seca (MS, matéria orgânica (MO, proteína bruta (PB, fibra em detergente ácido (FDA, fibra em detergente neutro (FDN, energia bruta (EB e amido. Foram utilizados quatro novilhos da raça Holandês Preto e Branco, com dois anos de idade e 340 kg de peso vivo e canulados no rúmen e duodeno. O delineamento experimental utilizado foi o quadrado latino 4 x 4, em que os animais receberam quatro tratamentos, que consistiram de dois níveis de volumosos (30 e 70% e dois períodos experimentais (14 e 21 dias. Houve efeito significativo do nível de volumoso sobre a digestibilidade ruminal de FDA e FDN, a digestibilidade intestinal e total da MS, MO, PB e amido e a digestibilidade total da EB. Não houve efeito do período experimental sobre os coeficientes de digestibilidade dos nutrientes avaliados. Conclui-se que a utilização de período experimental de 14 dias, em experimentos de digestão, é viável, quando se utiliza feno como fonte de volumoso.The objective of this research was to evaluate the effects of two experimental periods and two forage levels in the diet on the total and parcial apparent digestibility of dry matter (DM, organic matter (OM, crude protein (CP, acid detergent fiber (ADF, neutral detergent fiber (NDF, gross energy (GE and starch. Four Holstein steers, averaging two years old and 340 kg of body weight, ruminally and duodenally cannulated, were used. The experimental design was a 4 x 4 latin square and the animals received four treatments as following: two forage levels (30 and 70% and two experimental periods (14 and 21 days. There was effect of forage level on intestinal and total digestibility of DM, OM, CP and starch and on total digestibility of GE. There was effect of forage level on ruminal digestibility of ADF and NDF. There was no effect of

Estudio de un método basado en programación genética para la solución de Ecuaciones diferenciales ordinarias y parciales de dos variables

OpenAIRE

Ramírez Botero, Angélica María

2014-01-01

Este trabajo de tesis tiene como propósito, realizar un estudio desde el punto de vista matemático y computacional, sobre las ventajas y desventajas de usar un método basado en Programación Genética para resolver ecuaciones diferenciales ordinarias y ecuaciones diferenciales parciales en dos variables. En este estudio, se describe inicialmente las principales características del método exponiendo los fundamentos que soportan el desarrollo del algoritmo, desde su explicación conceptual hasta s...

Measuring system of partial discharges with optical links and interphase for PC; Sistema de medicion de descargas parciales con enlaces opticos e interfase para PC

Energy Technology Data Exchange (ETDEWEB)

Pacheco Arteaga, Maria Jojutla Olimpia

1999-07-01

In this work a measuring system of partial discharges based on the traditional electrical detection technique is presented, but that unlike the existing systems it uses an optical link of communication. On one hand, the optical fiber avoids that the electromagnetic interference of the area affects the measurement and on the other hand, allows to make measurements online. With a personal computer and an application program the system is controlled, besides storing and displaying graphically the acquired data. As a result of this thesis the developed system obtains the magnitude and the phase of every partial discharge occurred during a time interval fixed or selected by the user, as well as the total number of discharges. In a graphical form it presents the magnitude and the phase of each discharge, in addition to the corresponding histogram of frequencies. [Spanish] En este trabajo se presenta un sistema de medicion de descargas parciales basado en la tecnica de deteccion electrica tradicional, pero que a diferencia de los sistemas existentes utiliza un enlace de comunicacion optico. Por un lado, la fibra optica evita que la interferencia electromagnetica del medio afecte la medicion y por otro, permite hacer mediciones en linea. Con una computadora personal y un programa de aplicacion se controla el sistema, ademas de almacenar y presentar graficamente la informacion adquirida. Como resultado de esta tesis el sistema desarrollado obtiene la magnitud y la fase de cada descarga parcial ocurrida durante un intervalo de tiempo fijo o seleccionado por el usuario, asi como el numero total de descargas. En forma grafica presenta la magnitud y la fase de cada descarga, ademas del histograma de frecuencias correspondiente.

Correlação entre a fração inspirada de oxigênio, a pressão parcial de oxigênio materno e a pressão parcial de oxigênio fetal durante parto cesáreo em gestações normais Correlación entre la fracción inspirada de oxígeno, la presión parcial de oxígeno materno y la presión parcial de oxígeno fetal durante el parto por cesárea en embarazos normales Correlation between the inspired fraction of oxygen, maternal partial oxygen pressure, and fetal partial oxygen pressure during cesarean section of normal pregnancies

Directory of Open Access Journals (Sweden)

Carlos Henrique Viana de Castro

2009-08-01

Full Text Available JUSTIFICATIVA E OBJETIVOS: Apesar das alterações na função pulmonar, a oxigenação materna se mantém nas anestesias regionais para obstetrícia. Mesmo assim, nessas situações, o fornecimento de oxigênio suplementar para a mãe é prática disseminada. A principal justificativa é a boa oxigenação fetal; entretanto, não há devida comprovação. Este estudo prospectivo e com distribuição randômica das pacientes teve o objetivo de testar a hipótese da existência ou não de correlação entre hiperóxia materna e elevação de parâmetros gasométricos fetais na cesariana eletiva. MÉTODO: Foram estudadas vinte pacientes grávidas, submetidas à raquianestesia, através de gasometrias arteriais, com diferentes frações inspiradas de oxigênio e correlacionadas com a gasometria fetal. RESULTADOS: O aumento da fração inspirada de oxigênio materno não se correlacionou com o aumento da pressão parcial de oxigênio fetal. CONCLUSÕES: A indução de hiperóxia materna através de oxigenoterapia suplementar não foi capaz de aumentar a pressão parcial de oxigênio no feto. Não houve modificação nos parâmetros gasométricos fetais, mesmo em caso de mudança desses parâmetros na parturiente, induzidos pela hiperóxia durante a cesariana sob raquianestesia.JUSTIFICATIVA Y OBJETIVOS: A pesar de las alteraciones en la función pulmonar, la oxigenación materna se mantiene en las anestesias regionales para obstetricia. Pero incluso así, en esas situaciones, el suministro de oxígeno suplementario para la madre se practica en forma diseminada. La principal justificación es la buena oxigenación fetal, sin embargo, no existe la debida comprobación al respecto. Este estudio prospectivo y con distribución randómica de las pacientes, tuvo el objetivo de comprobar la hipótesis de la existencia o no de una correlación entre la hiperoxia materna y la elevación de los parámetros gasométricos fetales en la cesárea por elecci

Prevalência e caracterização clínica dos doentes com insuficiência respiratória parcial grave internados numa UCI

Directory of Open Access Journals (Sweden)

Alexandra Borba

2008-05-01

Full Text Available Resumo: Objectivos: A insuficiência respiratória parcial aguda (IRPA grave é uma situação comum na prática dos cuidados intensivos, mas os estudos existentes são insuficientes. Com este trabalho pretendeu-se estudar a prevalência e caracterizar clinicamente a população de doentes internados numa UCI que apresentam insuficiência respiratória parcial aguda grave.Material e métodos: Numa unidade de cuidados intensivos médico-cirúrgica avaliaram-se retrospectiva-mente os doentes internados durante o ano de 2004.Resultados: 37,6% dos doentes apresentaram IRPA grave. A análise estatística demonstrou que estes doentes diferiam dos doentes sem IRPA nos tempos de internamento e ventilação, índices de gravidade e mortalidade.Conclusão: A IRPA é uma situação com elevada prevalência e relevância em cuidados intensivos, mas as carac-terísticas destes doentes estão mal definidas, em parte devido à ausência de critérios claros na sua definição. Para melhor compreender este fenómeno são necessá-rios mais estudos, prospectivos e multicêntricos.Rev Port Pneumol 2008; XIV (3: 339-352 Abstract: Objective: The authors analysed patients with severe partial respiratory failure (SPRF admitted to a general Intensive Care Unit (ICU. The prevalence and clinical characteristics of these patients were evaluated.This work aims to study the rate of and to clinically characterise the patient population admitted to an Intensive Care Unit with acute severe partial respiratory failure.Material and methods: In 16-bed ICU of a central Hospital in Lisbon, patients admitted in the year 2004 were analysed. Patients with SPRF were recruited form patients with an ICU stay>24 hours. They were selected according to PaO2 and FiO2 and clinically characterized.Results: During the study period 472 patients were admitted, and 378 presented an ICU stay>24 hours and were enrolled. From those, 142 (37.6% met criteria for SPRF. Of these, 45 (31.7% a pulmonary

Avaliações clínica, ecográfica e anatomofisiológica do alotransplante parcial de vesícula urinária com células-tronco mesenquimais alogênicas derivadas do tecido adiposo em coelhos

Directory of Open Access Journals (Sweden)

S. T. L. Pinto Filho

2015-10-01

Full Text Available RESUMOOs problemas relacionados ao armazenamento vesical são muitos e relevantes. Eles, além de influírem de forma efetiva na qualidade de vida, podem eventualmente evoluir para falência renal. Existem vários trabalhos, os quais descrevem as propriedades imunomoduladoras e imunossupressoras das células-tronco mesenquimais derivadas do tecido adiposo (ADSCs. Objetiva-se com o presente avaliar clínica, ecográfica e anatomofisiologicamente o alotransplante parcial de bexiga a fresco em coelhos, utilizando como agente imunomodulador ADSCs alogênicas. Para isso foram utilizados 25 coelhos, sendo um deles macho e doador das ADSCs, e os outros 24 eram fêmeas, submetidas a alotransplante parcial de bexiga, sendo tratadas com ciclosporina (GCi ou células-tronco mesenquimais (GCe. Conclui-se que as ADSCs foram suficientes para evitar sinais clínicos e ecográficos de rejeição ao alotransplante de vesícula urinária, mantendo a estrutura anatomofisiológica vesical por até 30 dias em coelhos.

Como estes e não outros em seu lugar? Um olhar parcial sobre as condições de existência de discursos jornalísticos acerca do aborto

OpenAIRE

Silva, Carolina Rodrigues Freitas e

2014-01-01

Este é um olhar parcial, responsável e politicamente interessado que, a partir de um corpo – feminino, não branco, colonizado, busca analisar as condições que possibilitaram a existência de discursos jornalísticos sobre o aborto voluntário. Empreendi este trabalho tendo como fundamentos teórico-metodológicos as reflexões sobre o discurso, desenvolvidas por Michel Foucault, os estudos feministas, os estudos pós-coloniais e as teorias construcionistas do jornalismo. Com base n...

Análise da viabilidade da utilização da cinza de bagaço de cana-de-açúcar como substituição parcial do cimento Portland (doi.:10.5216/reec.V9i3.32023

Directory of Open Access Journals (Sweden)

Rodrigo Gustavo Delalibera

2014-11-01

Full Text Available RESUMO: Utilização de cinza de bagaço de cana-de-açúcar como material suplementar ao cimento Portland, visando minimizar a retirada de calcário, reduzindo a emissão de gás carbônico e preservando jazidas naturais. Foi avaliada a viabilidade do uso parcial de cinza de bagaço de cana-de-açúcar na substituição do cimento Porltand, através da análise de ensaios de resistência à compressão de corpos de prova cilíndricos de concreto aos 7, 14 e 28 dias de idade, apresentando uma substituição em massa de 10, 20 e 30% do cimento Portland. Considerando-se os resultados de resistência à compressão obtidos verificou-se que é viável a substituição parcial de cinza de bagaço de cana-de-açúcar, desde que a relação água/cimento e a porcentagem em massa a ser substituída sejam adequadas. Deste maneira, espera-se que a utilização da cinza do bagaço de cana-de-açúcar possa interferir economicamente e ecologicamente na produção do concreto. ABSTRACT: This paper examines the sugarcane bagasse ash use as supplementary material to Portland cement for the purpose of minimize the limestone removal to reduce emissions carbonic gas preserving natural deposits. The feasibility sugarcane bagasse ash use were analyzed. Through an analysis of results test of cylindrical concrete on 7, 14 and 28 days that showed a 10, 20 and 30 percent weight replacement by Portland cement. The reviewed about this cement and sugarcane bagasse were realized. After that, a experimental study with analysis were realized. Test of granulometry were made in every material that we used for the concrete production. Based on these results, it was concluded that the sugarcane bagasse ash use is feasible, since the water/cement and the mass percentage replaced are appropriate.

Análise da assimetria funcional hemisférica de crianças com epilepsia parcial e QI normal pelo desempenho nos subtestes do WISC

OpenAIRE

Muszkat,Mauro; Vincenzo,Neyde Santacchi de; Masuko,Alice; Reami,Denilce O.; Campos,Carlos J. Reis de

1991-01-01

Foram avaliadas 26 crianças, sem deficiência mental, com média de idade de 9±2 anos, com epilepsia parcial sem lesão cerebral evidenciável à TCC e com atividade paroxistica no EEG intercrítico localizada apenas em um hemisfério cerebral. Essas crianças foram submetidas à Escala de Inteligência Wechsler para Crianças (WISC) e à análise dos vários subtestes verbais e execução em relação à localização hemisférica da descarga no EEG. Os dados foram comparados ao desempenho no WISC de um grupo de ...

Resultados parciales de la aplicación de una Estrategia para la Conservación y Fomento de los juegos populares tradicionales infantiles en las Comunidades Matanceras

Directory of Open Access Journals (Sweden)

Jesús Lantigua Hernández

2009-12-01

Full Text Available El presente trabajo expone los resultados parciales de una estrategia para la conservación y fomento de los juegos populares tradicionales infantiles en las comunidades matanceras, resultante de investigaciones llevadas a cabo por estudiantes de la Facultad de Cultura Física, donde se expresan evidencias de la desaparición actual de estas formas lúdicas infantiles originadas por el desarrollo tecnológico, el desarrollo de la industria turística, así como la insuficiente influencia familiar y docente. Este estudio se sustenta además en una elaboración y monitoreo previos de la citada estrategia.

Trastorno por sobreingesta compulsiva. Validez de la diferenciación entre el síndrome completo y parcial

Directory of Open Access Journals (Sweden)

Carmen Berrocal

2002-01-01

Full Text Available El estudio examina en individuos con obesidad mórbida la validez del criterio de severidad propuesto por el DSM-IV para el diagnóstico del trastorno por atracón. La muestra está formada por 118 sujetos con un Indice de Masa Corporal (IMC mayor o igual a 40: 21 sujetos con trastorno por atracón, 26 con niveles subclínicos del problema y 71 sujetos sin episodios de sobreingesta. Los grupos fueron comparados en medidas de psicopatología, ansiedad, depresión, insatisfacción corporal, actitudes y hábitos alimentarios y calidad de vida. Apenas existen diferencias entre el síndrome completo y parcial en las variables evaluadas, cuestionándose así la validez del criterio de severidad propuesto para el diagnóstico del cuadro. Asimismo, los individuos que presentan el trastorno no difieren de los obesos sin episodios de sobreingesta en algunas variables clínicas relevantes, sugiriéndose que el grado de psicopatología no se relaciona tanto con la ocurrencia de atracones como con el nivel de obesidad de los sujetos

[Eighty years of Catedra de Protesis].

Science.gov (United States)

Siutti, O W

1994-06-01

Professor Antonio J. Guardo, important figur of the School of Dentistry of Buenos Aires, was the first professor who achieved in this school such a hierarchy being a dentist; for at that time it was demande for the Professorship the title of physician. The alternatives of this designation as professor are here described and at the same time some of the circumstances of his brillant teaching carreer, with references to his beginings and the family he formed.

Descrição de duas novas técnicas cirúrgicas para o tratamento de prolapso vaginal em vacas zebuínas: vaginectomia parcial e vaginopexia dorsal

Directory of Open Access Journals (Sweden)

José Abdo de Andrade Hellú

2015-11-01

Full Text Available Com o aumento da casuística e o insucesso da aplicação das técnicas convencionais de Caslick, Bühner ou Flessa, na redução do prolapso vaginal não associado à gestação em vacas zebuínas, caracterizada pela elevação significativa da recorrência da afecção, este trabalho teve por objetivo avaliar duas novas técnicas cirúrgicas na correção do prolapso vaginal, denominadas de vaginectomia parcial e vaginopexia dorsal em vacas. O estudo foi conduzido a campo, por um período de quatro anos, utilizando-se 812 vacas zebuínas (Nelore, Gir e Brahman, em idade reprodutiva, alojadas em diversas propriedades. O diagnóstico foi realizado através de anamnese e avaliação dos sinais clínicos e, de acordo com o estágio do prolapso vaginal, foi definida a técnica cirúrgica a ser executada, após procedimentos anestésicos. Os resultados pós-cirúrgicos das duas técnicas indicaram alta porcentagem de recuperação (93,4% para vaginectomia parcial e 96,14% para vaginopexia dorsal, baixo índice de recidivas (6,3% e 3,7%, respectivamente e baixa mortalidade (entre 0,2% e 0,3%. Desse modo, os resultados demonstram que as duas técnicas propostas podem ser indicadas para a redução e solução definitiva de prolapso vaginal em vacas zebuínas

Influência da prótese parcial removível implanto-retida sobre a mastigação e ingestão de nutrientes

OpenAIRE

Camila Heitor Campos

2012-01-01

Resumo: A reabilitação de arcos parcialmente dentados por meio de próteses parciais removíveis (PPR), sobretudo aqueles com ausência de dentes posteriores, apresentam limitações relativas ao suporte da prótese, que nestes casos é dividido entre dentes e mucosa, estruturas com diferentes resiliências. A associação de implantes osseointegrados à base da PPR tem como proposta atenuar estas limitações e trazer benefícios para o paciente, porém, a literatura sobre este assunto é escassa. Desta for...

Verificação e análise morfofuncional das características da mastigação em usuários de prótese dentária removível Verification and morfofunctional analysis of mastication characteristics in individuals using removable dental prosthesis

Directory of Open Access Journals (Sweden)

Renata Veiga Andersen Cavalcanti

2008-12-01

Full Text Available OBJETIVO: verificar as características da mastigação em indivíduos usuários de prótese dentária removível parcial e total, analisando prováveis fatores interferentes associados à função mastigatória. MÉTODOS: participaram 53 indivíduos, ambos os sexos, entre 42 anos e 67 anos, divididos em dois grupos: 32 indivíduos usuários de prótese dentária total e/ou parcial removível estável (G1 e 21 indivíduos com dentição natural (G2. Foram critérios de exclusão: deficiência neurológica ou cognitiva, deformidades dentofaciais, disfunção temporomandibular e qualquer lesão bucal que pudesse interferir na mastigação. A avaliação foi realizada com pão de sal, solicitando-se mastigação habitual. Foram analisados: características das estruturas e da musculatura, tipo de corte, manutenção de vedamento labial, tempo de mastigação, número de ciclos mastigatórios, e tipo de mastigação: se uni ou bilateral, considerando-se predomínio unilateral em mais de 66% dos ciclos mastigatórios em um único lado. RESULTADOS: foram verificadas alterações quanto à característica do músculo masseter e ao tipo de corte para G1 com diferenças estatisticamente significantes, quando comparado à G2. As demais estruturas orofaciais, lábios, língua, bochechas, mentual, e postura de lábios durante a mastigação apresentaram-se normais para ambos os grupos. Não houve diferença significante entre os grupos quanto aos movimentos mandibulares, ao tipo, tempo e número de ciclos mastigatórios e caracterização da deglutição. CONCLUSÃO: a mastigação em usuários de prótese dentária removível caracteriza-se por alterações no corte do alimento, indefinição de tipo mastigatório, vedamento labial satisfatório, média do tempo e de ciclos mastigatórios semelhantes àqueles obtidos para indivíduos com dentição natural.PURPOSE: to check mastication characteristics in individuals using removable dental prosthesis

“extracción, purificación parcial y secado de la enzima bromelina obtenida a partir del corazón de la piña (ananas comosus)”.

OpenAIRE

Quinde Fuentes, Carmina Stefania; Sánchez Lluguín, Nancy Viviana

2013-01-01

El presente artículo tuvo como objetivo la purificación parcial de la enzima bromelina mediante el sistema bifásico acuoso (SBA), evaluando el efecto del pH y las concentraciones de los componentes PEG 8000 y sales fosfato del sistema. La bromelina fue extraída del corazón de la piña de la variedad Milagreña mediante solución buffer a 4°c con EDTA, cisteína y fosfato disódico anhídrido. El mejor resultado de purificación obtenido en el sistema bifásico acuoso fue el que consistió de 16% PEG, ...

Volumetria hepática computadorizada como método de avaliação e acompanhamento da regeneração hepática após hepatectomia parcial em suínos

Directory of Open Access Journals (Sweden)

Fábio Augusto de Carvalho

Full Text Available OBJETIVO: O estudo analisou a volumetria hepática por tomografia axial computadorizada, através de um programa informatizado semi-automático de aquisição e processamento de imagens digitalizadas, como parâmetro de acompanhamento da regeneração hepática em suínos, após hepatectomia parcial. MÉTODO: Doze suínos fêmeas, da raça Landrace, jovens, foram distribuídos em 3 grupos, conforme tempo de observação após o procedimento cirúrgico: 5(G5, 10(10 ou 15(G15 dias. Todos foram submetidos à hepatectomia parcial e, posteriormente, após acompanhamento, sacrificados, procedendo-se a retirada do fígado regenerado. A peça da hepatectomia e o fígado regenerado foram pesados e submetidos à realização da tomografia e aferição do volume através do software HEPATO®. Para análise estatística foram utilizados os testes não-paramétricos de Kruskal-Wallis e Wilcoxon. Valores de p<0,05 indicaram significância estatística. RESULTADOS: O peso do fígado regenerado foi de: G5=434,5g, G10=449,25g e G15=486,5 g, p=0,592. A regeneração hepática a partir do peso do fígado foi de 83,58% (G5, 94,95% (G10 e 101,63% (G15, p=0,197. O volume do fígado regenerado foi de 403,58 cm² (G5, 450,88 cm² (G10 e 458,93 cm² (G15, p=0,941. A regeneração hepática a partir do volume do fígado foi de 74,25% (G5, 88% (G10 e 100% (G15, p=0,326. Não houve diferença estatística significativa entre os parâmetros. CONCLUSÃO: A avaliação volumétrica por tomografia computadorizada, utilizando um programa informatizado semi-automático de aquisição e processamento de imagens digitalizadas, é método fidedigno para avaliação e acompanhamento da regeneração hepática em suínos, após hepatectomia parcial.

Parálisis Parcial del Nervio Oculomotor Secundaria a Zoster Sine Herpete: Reporte de Un Caso

Directory of Open Access Journals (Sweden)

Oscar L. Rueda O.

2013-12-01

Full Text Available Introducción: Herpes Zoster es la reactivación del Virus Varicela Zóster en los ganglios sensoriales y/o autonómicos, típicamente caracterizado por dolor profundo de distribución dermatómica y erupciones vesiculares en piel. De manera infrecuente, puede presentarse el Zoster Sine Herpete, condición en la cual se presenta la distribución dermatómica del dolor en ausencia de lesiones dérmicas, convirtiendo el diagnóstico en un reto clínico. Caso clínico: Hombre de 69 años con dolor periorbitario, epifora, ptosis y pérdida de la aducción del ojo derecho. Los estudios imagenológicos y de laboratorio fueron normales, descartando así las principales causas de parálisis del nervio oculomotor. Se hizo diagnóstico presuntivo de Zoster Sine Herpete y se inició prueba terapéutica con valaciclovir, observándose resolución total de la sintomatología seis semanas después. Discusión: Este caso puede ser el primero en describir una parálisis parcial dolorosa del nervio oculomotor como única manifestación clínica de la reactivación del Virus Varicela Zóster y busca alertar al personal médico sobre una enfermedad latente que hace de sus reapariciones una gama de presentaciones no siempre fáciles de identificar.

Retirada do tegumento e da extração dos pigmentos na qualidade protéica do feijão-preto Effect of removal of tegument and extraction of pigments on protein quality of black beans

Directory of Open Access Journals (Sweden)

Ana Cristina Nascimento Chiaradia

1999-08-01

Full Text Available O feijão é cultivado e consumido mundialmente e é a leguminosa mais consumida na América Latina. O baixo valor biológico das proteínas do feijão pode ser resultante, dentre outros, da presença de fatores antinutricionais presentes no tegumento do grão. Este trabalho visou avaliar, através de ensaios biológicos, o efeito da retirada do tegumento e das antocianinas e outros polifenóis do feijão-preto, na qualidade de suas proteínas. Foram analisados o quociente de eficiência protéica, o quociente de eficiência líquida protéica e a utilização líquida da proteína, e digestibilidade. Os resultados obtidos mostraram que a eliminação parcial do tegumento dos grãos cozidos e secagem em estufa diminuíram significativamente o valor do quociente de eficiência protéica comparativamente ao do grão integral cozido e secado nas mesmas condições. A extração, com etanol acidificado, de 27,5% dos polifenóis não influiu significativamente no valor protéico do feijão-preto. Concluiu-se que a retirada do tegumento e a extração parcial de polifenóis do feijão não elevaram a sua qualidade protéica.Bean seeds (Phaseolus vulgaris, L. are cultivated and consumed all over the world and are a staple food in most countries of South America. The low biological value of bean proteins may be due to, among others, the effect of antinutritional factors on the tegument. The objective of this work was to evaluate, through biological assays, the effect of removal of black bean tegument, anthocyanins and other polyphenols on protein quality. The protein efficiency ratio, the protein liquid efficiency ratio, the protein liquid utilization and the digestibility were analyzed. The results indicated that removal of the tegument of cooked beans reduced their protein value (PER when compared to whole cooked beans. The ethanolic extraction of 27.5% of polyphenols did not increase the protein quality of beans. It was concluded that removal of the

Causas de la deserción en la hospitalización parcial de adolescentes

Directory of Open Access Journals (Sweden)

Juana Velázquez Argota

1997-04-01

Full Text Available Se presentan los resultados del estudio de las causas de deserción de 23 adolescentes que funcionan al nivel neurótico en régimen de hospitalización parcial. Se distingue más de una causa de deserción, tanto en el grupo en que la deserción se produjo en la primera semana de hospitalización (9 casos, como en los de estadía más prolongada (14 casos, y se destacan la vaguedad de la conciencia de enfermedad, la pretensión de establecer una alianza psicopática con el terapeuta y la no formulación por el terapeuta de los objetivos de ingreso con claridad. Para prevenir la deserción se recomienda, antes de decidir el ingreso, explicar los objetivos de la hospitalización, trabajar en el desarrollo de la conciencia de enfermedad y el manejo psicoterapéutico cuidadoso de la propuesta de alianza psicopática.The results of the study about the causes of the dropout of 23 adolescents functioning at the neurotic level in a partial hospitalization regimen are presented. There is more than one cause of dropout, both in the group where it took place during the first week of hospitalization (9 cases and in those with a longer stay. It is stressed the vagueness of the consciousness of the disease, the pretension to establish a psychopathic alliance with the therapist, and the unclear formulation on the part of the therapist of the objectives of admission. To prevent the dropout, it is recommended, before deciding the admission, to explain the objectives of hospitalization, to work on the development of the conciousness of the disease, and the careful psychotherapeutic management of the proposal of the psychopathic alliance.

[Biologico-periodontal considerations in restoration of teeth partially destroyed by caries or traumatism].

Science.gov (United States)

Carrillo Martínez, J J; Zermeño Ibarra, J A; Mercado Martínez, E G; Villanueva Neuman, Y; Castellanos Olmedo, R

1990-01-01

Since a great number of teeth could be rehabilitated and not extracted, in this paper we analyze the relation Perio-protesis by the point of the biology of marginal periodontal ligament, and the different options to establish this relations when are lost by decay or traumatism. We discuss the contraindications to avoid greater problems than benefits when intend to rehabilitate lost teeth.

[A case of rupture of the left ventricle free wall with papillary muscle dysfunction following acute myocardial infarction, operated on successfully].

Science.gov (United States)

de Lima, R; Perdigão, C; Neves, L; Cravino, J; Dantas, M; Bordalo, A; Pais, F; Diogo, A N; Ferreira, R; Ribeiro, C

1990-09-01

The authors present a case of left ventricular free wall rupture post acute myocardial infarction, associated with mitral papillary posterior muscle necrosis, operated by infartectomy and mitral valvular protesis replacement. They refer the various complications occurred during the hospital staying, and discuss its medical and surgical approach. The patient was discharged alive and six months after the infarction keeps a moderate activity.

Psychological aspects rehabilitation of patients with anophthalmia

Directory of Open Access Journals (Sweden)

E. N. Verigo

2014-07-01

Full Text Available This work deals with the psychological rehabilitation of patients with anophthalmia having eye protesis as the main role on the problem. Stages of psychological reaction after eye lost and also the difficulties of adaptation of fellows with both eyesight lost is widely discussed. In order to help practitioners, recommendations on dealing this kind of patients has been given.

Psychological aspects rehabilitation of patients with anophthalmia

Directory of Open Access Journals (Sweden)

E. N. Verigo

2012-01-01

Full Text Available This work deals with the psychological rehabilitation of patients with anophthalmia having eye protesis as the main role on the problem. Stages of psychological reaction after eye lost and also the difficulties of adaptation of fellows with both eyesight lost is widely discussed. In order to help practitioners, recommendations on dealing this kind of patients has been given.

Efectos combinados de escarificación y de hidratación parcial en la germinación de semillas frescas de leguminosas Combined effects of scarification and partial hydration on the germination of fresh legume seeds

Directory of Open Access Journals (Sweden)

Yolanda González

2008-12-01

Full Text Available Se aplicó un diseño de clasificación simple con arreglo factorial y cinco réplicas (25 semillas cada una para conocer la germinación de las semillas frescas de leguminosas sometidas a diferentes tratamientos pregerminativos de hidratación-deshidratación y condiciones controladas de estrés calórico del sustrato. Previamente se estudió el comportamiento germinativo ante tratamientos de escarificación: agua a 80ºC durante 2' (en semillas de Crotalaria sp. y H2SO4 al 96% durante 10' (en semillas de Indigofera sp., Desmanthus virgatus y Centrosema pubescens, que se combinaron con un tratamiento de hidratación parcial en agua a temperatura alterna de 25/30ºC (termoperíodo óptimo de germinación. La hidratación parcial se realizó hasta dos horas antes del inicio de la germinación visible; en las semillas escarificadas de Indigofera sp., D. virgatus, Crotalaria sp. y C. pubescens este momento se alcanzó a las 15, 16, 16 y 19 horas, respectivamente. La deshidratación se llevó a cabo al aire durante 48 horas, hasta alcanzar aproximadamente el contenido inicial de humedad de las semillas (7-12% en base a la masa fresca. En todas las especies, excepto en D. virgatus, los tratamientos de hidratación parcial incrementaron el porcentaje de germinación, aunque originaron una mayor velocidad de germinación. Se concluye que los tratamientos de hidratación parcial en agua son adecuados para incrementar la germinación de las especies estudiadas, excepto en D. virgatus, bajo condiciones controladas de estrés calórico.A simple classification design with factorial arrangement and five replications (25 seeds each was used in order to know the germination of fresh legume seeds subject to different pregerminative hydration-dehydration treatments and controlled conditions of caloric stress of the substratum. The germinative performance before scarification treatments was previously studied: water at 80ºC for 2' (in Crotalaria sp. seeds and H2

Estimación de biomasa en herbáceas a partir de datos hiperespectrales, regresión PLS y la transformación continuum removal

Directory of Open Access Journals (Sweden)

M. Marabel-García

2014-12-01

Full Text Available El objetivo del estudio fue comparar los resultados de dos métodos para la estimación de la biomasa aérea a partir de datos de espectroradiometría de campo: (i regresión por mínimos cuadrados parciales (Partial Least Squares Regression, PLSR y (ii regresión lineal utilizando los índices Profundidad del Mínimo (Maximum Band Depth, MBD y Área Sobre el Mínimo (Area Over the Minimum, AOM como descriptores. En ambos casos se llevó a cabo una previa transformación de los espectros mediante Continuum Removal (CR. Como los resultados empleando PLS (R2=0,920, RMSE=3,622 g/m2 fueron muy similares a los obtenidos con los índices (para AOM: R2=0,915, RMSE=3,615 g/m2, recomendamos los índices derivados del CR puesto que su interpretación es más sencilla que la del PLSR. 

Surgical treatment of acetabular fractures: clinical and radiological results and its complications

International Nuclear Information System (INIS)

Martinez, C; Rey, R.

2011-01-01

The objective of this work is to analyse a serie of consecutive cases of surigically treated acetabular fractures, evaluating middle-term clinical and radiological results. A retrospective analysis of clinical histories, surgical forms and X-rays was performed for 42 patients who underwent surgery in two centers (Instituto Nacional de Ortopedia y Traumatologia [INOT] and Banco de Protesis), from July 2001 through August 2007

Mini-mastoidectomía para anastomosis hipogloso-facial con sección parcial del nervio hipogloso

Science.gov (United States)

Campero, Álvaro; Ajler, Pablo; Socolovsky, Mariano; Martins, Carolina; Rhoton, Albert

2012-01-01

Introducción: La anastomosis hipogloso-facial es la técnica de elección para la reparación de la parálisis facial cuando no se dispone de un cabo proximal sano del nervio facial. La técnica de anastomosis mediante fresado mastoideo y sección parcial del hipogloso minimiza la atrofia lingual sin sacrificar resultados a nivel facial. Método: La porción mastoidea del nervio facial transcurre por la pared anterior de la AM, a un promedio de 18+/-3 mm de profundidad respecto de la pared lateral. Se debe reconocer la cresta supramastoidea, desde la cual se marca una línea vertical paralela al eje mayor de la AM, 1 cm por detrás de la pared posterior del CAE El fresado se comienza desde la línea medio mastoidea hasta la pared posterior del CAE. Una vez encontrado el nervio facial en el tercio medio del canal mastoideo, el mismo es seguido hacia proximal y distal. Resultados: El abordaje descripto permite acceder al nervio facial intratemporal en su porción mastoidea, y efectuar un fresado óseo sin poner en riesgo al nervio o a estructuras vasculares cercanas. Se trata de un procedimiento técnicamente más sencillo que los abordajes amplios habitualmente utilizados al hueso temporal; no obstante su uso debe ser restringido mayormente a la anastomosis hipogloso-facial. Conclusión: Esta es una técnica relativamente sencilla, que puede ser reproducida por cirujanos sin mayor experiencia en el tema, luego de su paso por el laboratorio de anatomía. PMID:23596555

EL HIDROCICLÓN COMO UNA ALTERNATIVA PARA LA RECUPERACIÓN PARCIAL DE AYUDAS FILTRANTES EN EL PROCESO DE REFINACIÓN DE AZÚCAR

Directory of Open Access Journals (Sweden)

SIMÓN REIF ACHERMAN

2010-01-01

Full Text Available La incorporación de ayudas filtrantes o coadyuvantes en los procesos de filtración ha incrementado la eficiencia de remoción de las impurezas suspendidas en los licores resultantes de las etapas de evaporación y cristalización en el proceso de obtención de azúcar refinada. La reducción de su vida útil a un solo ciclo de utilización implica, sin embargo, evidentes inconvenientes para su aplicación industrial. El objetivo principal de este estudio fue la identificación y validación del uso de un hidrociclón como una alternativa técnica y económicamente factible para la recuperación parcial de estos materiales. La investigación se basó en las características físicas de los componentes del deshecho resultante del proceso de filtración (ayudas filtrantes, carbón activado, sacarosa, agua e impurezas, y la cantidad de sólidos suspendidos en la corriente.

Organizational commitment, job satisfaction and intention to leave: A comparative analysis between part-time and full-time faculties Compromiso organizativo, satisfacción con el trabajo e intención de abandonar la organización: Análisis comparativo entre el profesorado universitario a tiempo parcial y a tiempo completo.

Directory of Open Access Journals (Sweden)

Pep Simo

2008-12-01

Full Text Available The importance of part-time work has been growing in recent years, due to its significant increase in today's societies, and higher education institutions have not been alien to this trend. The present research tries to study the relationship between organizational commitment and job satisfaction with the intention to leave the institution, comparing part-time and full-time faculty. An empirical research, grounded in the model proposed by Currivan (1999, has been undertaken, with a sample of faculty of ETSEIAT, a college of the Technical University of Catalonia. Results show the existence of the relationships with organizational commitment, job satisfaction and intention to leave predicted in the literature, and significant differences in job satisfaction and organizational commitment between part-time and full-time faculty. The paper ends with some proposals of further research. El trabajo a tiempo parcial ha ido adquiriendo importancia debido a su significativo aumento en las sociedades actuales, y las universidades no han sido ajenas a esta tendencia. La presente investigación estudia las relaciones entre el compromiso organizativo y la satisfacción con el trabajo con la intención de abandonar la universidad, comparando al profesorado universitario a tiempo completo con el profesorado a tiempo parcial. El estudio empírico consiste en un análisis de los predictores de la satisfacción con el trabajo y el compromiso organizativo basado en el modelo propuesto por Currivan (1999, con una muestra procedente de la escuela ETSEIAT (Universitat Politècnica de Catalunya. Los resultados muestran que las relaciones entre compromiso, satisfacción e intención de abandonar son las previstas en la literatura, así como diferencias significativas entre profesorado a tiempo completo y tiempo parcial. El estudio acaba con algunas propuestas de investigaciones futuras.

Aplicação do modelo hipercubo com prioridade na fila com mais de um servidor preferencial sem considerar a hipótese de backup parcial: estudo de caso em um SAMU

Directory of Open Access Journals (Sweden)

Caio Vitor Beojone

Full Text Available Resumo O estudo de Sistemas de Atendimento Emergencial – SAE visa encontrar meios de fornecer serviços de saúde efetivos e melhorar a qualidade de vida da população respeitando as limitações de recursos disponíveis. Nesse contexto, o objetivo do presente trabalho foi mostrar o potencial de aplicação do modelo hipercubo com prioridade na fila com mais de um servidor preferencial sem considerar a hipótese de backup parcial em Sistemas de Atendimento Móvel de Urgência – SAMU em que o nível de utilização do sistema é relativamente baixo. Para isso foram realizados alguns experimentos do modelo hipercubo com prioridade na fila sem backup parcial e prospecção de cenários futuros por meio de um estudo de caso no SAMU da cidade de Bauru, SP. Foram avaliados os impactos do aumento na demanda sobre o sistema e o quanto e como (aonde localizar? a aquisição de uma nova ambulância pode melhorar as medidas de desempenho do sistema. Os principais resultados mostram que um aumento de 50% na demanda pode dobrar o tempo de resposta dessas ambulâncias, por outro lado, aumentos mais discretos têm um impacto pequeno sobre o sistema, como pode ser visto nos aumentos de 5,71% e 13,57%, nos quais o acréscimo nos tempos de resposta foram de 5% e 16%, respectivamente. A aquisição de uma nova ambulância foi avaliada em termos das medidas de desempenho e os melhores resultados em todos os cenários se deu quando ela estava presente no átomo Boulevard, obtendo um tempo médio de resposta 3% inferior às demais localidades, em média.

Evaluación de la actividad antifúngica del gel de Satureja brevicalyx Epling “Inca Muña” frente a Candida spp. de pacientes portadores de prótesis

OpenAIRE

Castillo Andamayo, Diana Esmeralda

2017-01-01

Evalúa el efecto antifúngico de gel formulado con aceite esencial de Satureja brevicalyx Epling “Inca Muña” frente a Candida spp. de pacientes portadores de prótesis. Los pacientes fueron divididos en tres grupos: pacientes no portadores de prótesis, pacientes portadores de prótesis parcial removible metálica, pacientes portadores de prótesis total. A los pacientes no portadores se les recolectó muestras de saliva en frascos estériles y aquellos que portaban prótesis removible, se les solicit...

Valor nutritivo de pan con sustitución parcial de harina de trigo (Triticum aestivum por arracacha (Arracacia xanthorrhiza Bancroft, fortificado

Directory of Open Access Journals (Sweden)

María Elena León Marroú

2010-01-01

Full Text Available Se realizó un estudio de la composición química y el valor nutricional de pan fortificado con hierro, elaborado en Perú, con sustitución parcial de harina de trigo en un 40 % por una masa de consistencia pastosa de raíces de Arracacha, un cultivo andino subexplotado por la aplicación de tecnologías empíricas y desplazado por patrones de consumo foráneo. Se describen brevemente aspectos tecnológicos de la elaboración del pan. El pan fortificado presenta contenidos de proteína 8,32 %; grasa 10,11 % y carbohidratos 55,13 % con un valor energético de 344,79 kcal/100 g; aporta principalmente K (77,05 mg/100 g, Fe (> 5 mg/100 g, P (19,87 mg/100 g, Ca (19,29 mg/100 g y Mg (11,93 mg/100 g, entre otros y vitaminas A (28,52 UI y C (10,75 UI, estando presentes en menor cuantía las vitaminas E y del complejo B. Para los elementos y vitaminas, el pan satisface parte de las Cantidades Diarias Recomendadas y en ninguno de los casos los Niveles de Ingesta Máximos Tolerables son excedidos.

Valor nutritivo de pan con sustitución parcial de harina de trigo (Triticum aestivum por arracacha (Arracacia xanthorrhiza Bancroft, fortificado

Directory of Open Access Journals (Sweden)

María Elena León Marroú

2010-12-01

Full Text Available Se realizó un estudio de la composición química y el valor nutricional de pan fortificado con hierro, elaborado en Perú, con sustitución parcial de harina de trigo en un 40 % por una masa de consistencia pastosa de raíces de Arracacha, un cultivo andino subexplotado por la aplicación de tecnologías empíricas y desplazado por patrones de consumo foráneo. Se describen brevemente aspectos tecnológicos de la elaboración del pan. El pan fortificado presenta contenidos de proteína 8,32 %; grasa 10,11 % y carbohidratos 55,13 % con un valor energético de 344,79 kcal/100 g; aporta principalmente K (77,05 mg/100 g, Fe (> 5 mg/100 g, P (19,87 mg/100 g, Ca (19,29 mg/100 g y Mg (11,93 mg/100 g, entre otros y vitaminas A (28,52 UI y C (10,75 UI, estando presentes en menor cuantía las vitaminas E y del complejo B. Para los elementos y vitaminas, el pan satisface parte de las Cantidades Diarias Recomendadas y en ninguno de los casos los Niveles de Ingesta Máximos Tolerables son excedidos.

Funzionalizzazione della mandibola dopo ricostruzione con lembo libero rivascolarizzato di fibula "single strut". Al di là del deficit di verticalità.

OpenAIRE

Gessaroli, Manlio

2009-01-01

Obiettivi: Valutare la modalità  più efficace per la riabilitazione funzionale del limbo libero di fibula "single strut", dopo ampie resezioni per patologia neoplastica maligna del cavo orale. Metodi: Da una casistica di 62 ricostruzioni microvascolari con limbo libero di fibula, 11 casi sono stati selezionati per essere riabilitati mediante protesi dentale a supporto implantare. 6 casi sono stati trattati senza ulteriori procedure chirurgiche ad eccezione dell'implantologia (gruppo 1), a...

Comparación de las propiedades del concreto utilizando escoria de alto horno como reemplazo parcial y total del cemento Pórtland ordinario

Directory of Open Access Journals (Sweden)

I. Escalante

2008-06-01

Full Text Available Se realizó una investigación con dos tipos de concreto siguiendo la norma ACI 211.1: a concretos sustituidos al 30, 50 y 70 % con escoria de alto horno (EAH y b concretos 100 % EAH activada con 4, 6 y 8 % de óxido de sodio (Na2O en forma de silicato de sodio de módulo 2.0. Todos los sistemas se caracterizaron mecánicamente de 1 a 28 días. Se utilizó microscopía electrónica de barrido y espectroscopía por dispersión de energía para analizar la microestructura, grado de avance de la reacción y productos formados. La sustitución parcial del cemento Pórtland (CPO por EAH no fue benéfica para las propiedades mecánicas, contrario a la sustitución total por EAH activada, la cual resultó en propiedades mecánicas superiores que las de concretos de puro CPO. La activación de la escoria con 8 % de Na2O resultó más efectiva, seguido de 6 y 4 % de Na2O.

Sustitución parcial del alimento balanceado por ensilaje de soya y su efecto en la producción y calidad de la leche de vaca, en el trópico húmedo de Costa Rica

Directory of Open Access Journals (Sweden)

Carlos Tobía

2004-01-01

Full Text Available Se evaluó el efecto de la sustitución parcial (0, 13,6 y 27,2% de un alimento balanceado (AB por el ensilaje de soya, con melaza de caña al 8% e inoculado con Lactobacillus brevis 3 (ES, en las dietas de vacas Holstein sobre la producción y calidad de la leche. Los 3 tratamientos se asignaron a 12 vacas de primera lactancia, con un peso promedio de 550 kg y con una producción promedio diaria de 18±3 kg de leche, distribuidas en un diseño experimental “cross over”. La sustitución del 13,6% del AB por ES no afectó el consumo de materia seca (MS ni la producción de leche, pero sí redujo en un 7% los costos de alimentación. La sustitución del 27,2% del AB por ES redujo el consumo de MS (P² 0,05 y la producción promedio de leche en 1,6 kg vaca-1 día-1 (P² 0,05. La introducción del ES en la dieta no afectó el porcentaje de grasa ni el contenido de sólidos totales, pero sí redujo (P² 0,05 el porcentaje de proteína y lactosa de la leche. Estos resultados aportan evidencia de que la introducción del ES, como sustituto parcial del AB en la dieta, es una alternativa viable para reducir los costos de producción de leche en el trópico.

ARSENIC REMOVAL BY IRON REMOVAL PROCESSES

Science.gov (United States)

Presentation will discuss the removal of arsenic from drinking water using iron removal processes that include oxidation/filtration and the manganese greensand processes. Presentation includes results of U.S. EPA field studies conducted in Michigan and Ohio on existing iron remo...

Análisis de competitividad y de mercado en la sustitución parcial o total de azúcar por otros edulcorantes en las empresas del sector de bebidas no alcohólicas en Colombia de 2009 a 2014

OpenAIRE

Lobelo Miranda, Yousef; Alvarado Clavijo, Marco

2015-01-01

Este trabajo analiza el impacto en la competitividad y el efecto en el mercado por la sustitución parcial o total de azúcar por otros edulcorantes calóricos y no calóricos en las empresas del sector de bebidas no alcohólicas en Colombia; su dinámica en las variaciones de los márgenes de rentabilidad a partir de la disminución en los costos de producción y las consecuencias en la competitividad sector de bebidas no alcohólicas. Las evidencias de estudios técnicos demuestran que edulcorantes co...

[Experimental analysis of finishing lines in ceramometal restorations].

Science.gov (United States)

Gascón, F; Gil, J A; Fons, A; Badal, R

1990-11-01

The preparation is the first step of any tooth reconstruction. The biological integration of the protesis is depending on the marginal adaptation (finish line of the preparation), occlusal adaptation (occlusal reduction), longevity of the restoration (retention and luting) and esthetics. The effect the two finish line of the preparation is studied using experimental design. In porcelain-fused-to-metal the finish line of the preparation in chanfer is superior at the beveled shoulder, because proportioning better marginal adaptation.

Hair Removal

Science.gov (United States)

... Staying Safe Videos for Educators Search English Español Hair Removal KidsHealth / For Teens / Hair Removal What's in ... you need any of them? Different Types of Hair Before removing hair, it helps to know about ...

Substituição parcial do pericárdio de cães por membrana de látex natural Partial replacement of dog pericardium with a natural latex membrane

Directory of Open Access Journals (Sweden)

Soraya Lopes SADER

2000-12-01

leucograma e ao ECG, apenas inversão da onda T, em todos os grupos. CONCLUSÃO: A membrana de látex natural mostrou-se adequada para a substituição parcial do pericárdio de cães, em observação de até 345 dias, propiciando a regeneração do pericárdio nativo.BACKGROUND: There are numerous advantages in closing the pericardial cavity after heart surgery and intrapericardial pneumonectomies. OBJECTIVE: To study the behavior of a natural latex membrane as a partial pericardium substitute. MATERIAL AND METHODS: Sixteen dogs divided into 3 groups were submitted to resection of an elliptical flap of the left anterolateral portion of the pericardium (7 x 5 cm: Group A (n=4 - the removed flap was immediately reimplanted; Group B (n=8 - the flap was replaced with a 0.3 mm thick natural latex membrane of equivalent area; Group C (n=4 - the latex flap was 0.7 mm thick. In all animals the flap was fixed with continuous 5-0 or 6-0 polypropylene sutures. In group C, 4 additional U-shaped stitches anchored with dacron pledgets were applied. All animals were submitted to ECG and to white cell counts during the preoperative period as well as to macro- and microscopic post mortem study. RESULTS: Group A - the self-graft was macro and microscopically intact, strongly adhering to the lung and loosely adhering to the epicardium; Group B - total suture dehiscence occurred in 1 animal and partial dehiscence in 2. The latex membrane did not adhere to the lung or to the epicardium. In 3 animals (37.5% there was full regeneration of the pericardium underlying the natural latex, microscopically identical to the native pericardium. Group C - the sutures were intact and total pericardium regeneration was observed in 3 animals (75%. In the remaining animals of Groups B and C, the epicardium underlying the latex was slightly thickened, permitting easy visualization of the coronary vessels. Some areas with dense lymphocytes and plasma cells infiltrates, fibroblast and vascular proliferation were

Caso: Infección cutánea en el punto de punción de anestesia subaracnoidea

OpenAIRE

López Pérez, Jesús; Castañer Ramón-Llín, Carla; Furones Tormo, Beatriz; Fernández Fernández, María Adoración; García Ferreira, Joaquín; Fayos de la Asunción, Miguel E

2012-01-01

Mujer de 76 años de edad, con antecedentes de asma bronquial en tratamiento con bromuro de ipatropio e hipertiroidismo tratado con carbimazol. Artrosis generalizada y gonartrosis bilateral. Propuesta para cirugía traumatológica de protesis total de rodilla derecha. Se realiza técnica locorregional mediante anestesia subaracnoidea resultando exitosa tras 4 intentos fallidos de punción, confirmando salida de LCR transparente. Se administra bupivacaina isobárica 14 mg. más 20 mcg de fentanilo...

Respuesta productiva de conejos alimentados con forraje verde hidropónico de avena, como reemplazo parcial de concentrado comercial

Directory of Open Access Journals (Sweden)

Poblete Pérez Cecilia Eva

2011-06-01

Full Text Available La respuesta productiva de conejos raza californiana alimentados con forraje verde hidropónico (FVH deavena como reemplazo parcial de concentrado comercial (CC, fue evaluada en condiciones de desiertoen el norte de Chile. Se establecieron cinco tratamientos de alimentación, equivalentes a 0, 25, 50, 75 y100% de reemplazo de la dieta diaria con FVH, el cual fue cosechado y utilizado directamente diez díasdespués de la siembra. Cuarenta y cinco conejos destetados a los 31 días fueron evaluados en un diseñocompletamente al azar hasta alcanzar un peso de sacrificio de 2 kg de peso vivo. La calidad del FVH deavena fue considerada como buena, presentando similar valor nutritivo que el CC. Las variables evaluadasy sus respectivos rangos fueron: consumo de materia seca promedio (59.17 - 104.73 g/día, gananciade peso vivo promedio (16.35 - 29.10 g/animal por día, conversión alimenticia promedio (3.31 - 3.93 kgMS/kg PV, tiempo de peso vivo a sacrificio (53 - 91 días, peso vivo final (1430 - 2044 g/animal, pesode la canal (1235 - 1385 g/animal y rendimiento de la canal (59.19 - 62.25%. El reemplazo de hasta50% de la dieta base con FVH de avena no afectó significativamente (P ≤ 0.05 el consumo de alimento,tiempo de peso vivo a sacrificio, peso vivo final y rendimiento de la canal, haciendo posible su uso comorecurso forrajero alternativo en la alimentación de conejos en etapa de engorde en condiciones de desierto.

Artroplastia parcial no tratamento das fraturas do colo do fêmur Hemiarthroplasty in the treatment of fractures of the femoral neck

Directory of Open Access Journals (Sweden)

Nelson Keiske Ono

2010-01-01

Full Text Available OBJETIVO: Realizar avaliação epidemiológica e clínica dos pacientes com fratura desviada do colo femoral, que foram submetidos ao tratamento cirúrgico, com artroplastia parcial do quadril cimentada. MÉTODOS: Foram avaliados, de forma retrospectiva, todos os pacientes com fratura desviada do colo do fêmur (Garden III e IV submetidos à artroplastia parcial do quadril com prótese unipolar (Thompson, cimentada pela via de acesso posterolateral do quadril, no período de junho de 2005 a setembro de 2008. RESULTADOS: Foram avaliados, inicialmente, 70 pacientes. A média de idade foi de 83,1 anos. Houve predomínio de pacientes do sexo feminino (84,3%. Houve acompanhamento ambulatorial de 36 pacientes, cujo tempo de seguimento variou de 10 a 48 meses (média de 26,5 meses. Houve perda de seguimento de 15 pacientes. Dezenove pacientes foram a óbito, com uma taxa de mortalidade no primeiro ano de 25,4%. Os pacientes classificados como ASA III apresentaram taxa de 25,7%, enquanto os pacientes ASA II, uma taxa de 12,1%. Dois pacientes apresentaram trombose venosa profunda sintomática; um paciente, infecção do sítio operatório; e nenhum paciente apresentou luxação do quadril. A maioria dos pacientes evoluiu sem dor. Doze pacientes (33%, durante a evolução, apresentaram piora na capacidade de deambulação. CONCLUSÃO: Nenhum caso de luxação do quadril foi observado. Os pacientes classificados como ASA III apresentaram um índice de mortalidade mais elevado, em relação aos pacientes ASA I e II. Houve uma piora da capacidade de deambular em 33% dos pacientes. Não foi necessária revisão de nenhum paciente por soltura ou dor. Trinta pacientes não apresentavam dor (83,3%, quatro apresentavam dor moderada (11,1% e dois apresentavam dor intensa (5,5%.OBJETIVE: To epidemiologically and clinically evaluate patients with displaced femoral neck fractures that had surgical treatment with cemented hemiarthroplasty. METHODS: We evaluated

Removing Hair Safely

Science.gov (United States)

... For Consumers Home For Consumers Consumer Updates Removing Hair Safely Share Tweet Linkedin Pin it More sharing ... related to common methods of hair removal. Laser Hair Removal In this method, a laser destroys hair ...

EM BUSCA DA SÍLABA ÓTIMA: PROCESSOS DE ACRÉSCIMO NO CABOVERDIANO

Directory of Open Access Journals (Sweden)

Ulisdete Rodrigues de Souza Rodrigues

2010-12-01

Full Text Available This study comprises phonological insertion processes – a protesis, ephentesis and paragoge – which are active in the formation of optimal syllable in Capverdian Language and in the Creole Languages in general, by Optimality Theory (OT. The key question is: why is there the insert and how far does the addition make it easy or difficult to the emergence of CV canonical structure? The intention, in answering it, is to show the hierarchy and interaction of constraints in capverdian phonotatic system.

Imperfuração anal associada à agenesia parcial do sacro e lipoma pré-sacral: síndrome de Currarino Imperforate anus associated with partial sacral agenesis and presacral lipoma: Currarino syndrome

Directory of Open Access Journals (Sweden)

Paulo Ricardo G. Zen

2010-09-01

Full Text Available OBJETIVO: Relatar o caso de uma criança com síndrome de Currarino diagnosticada após avaliação por episódios recorrentes de infecção urinária. DESCRIÇÃO DE CASO: Menina branca de dois anos, única filha de pais hígidos e sem história familiar de defeitos congênitos. A criança nasceu com imperfuração anal e com fístula retovestibular diagnosticadas no primeiro dia de vida. Por volta dos sete meses, começou a apresentar episódios recorrentes de infecção urinária, estabelecendo-se o diagnóstico de bexiga neurogênica. Na mesma ocasião, foi constatada a presença de agenesia parcial do sacro. A avaliação pela tomografia computadorizada e ressonância nuclear magnética de coluna identificou presença de fístula coincidente com a fosseta da transição lombo-sacral, observada ao exame físico; amputação da porção inferior da medula, com diminuição do número de raízes nervosas da cauda equina e massa pré-sacral de aspecto lipomatoso. Esta foi confirmada durante a cirurgia de correção do ânus imperfurado. A criança não apresentava outras dismorfias e a avaliação radiológica dos pais não identificou anormalidades sacrais. COMENTÁRIOS: A síndrome de Currarino é uma doença genética autossômica, dominante e rara caracterizada pela tríade formada por atresia anal, agenesia parcial do sacro e tumoração pré-sacral. Inclui teratomas, meningoceles, cistos entéricos e lipomas, como observado em nossa paciente. Crianças apresentando anormalidades anorretais deveriam ser sempre cuidadosamente avaliadas quanto à presença da síndrome de Currarino. A agenesia parcial do sacro é um forte indicativo da doença.OBJECTIVE: To report a patient with Currarino syndrome diagnosed after evaluation for recurrent urinary infections. CASE DESCRIPTION: This is a Caucasian two-year-old girl, the only daughter of healthy unrelated parents with no family history of congenital defects. The patient was born with imperforate

Topes en prótesis parcial removible. Realización y diseño actual

OpenAIRE

Samsó Manzanedo, Jorge; Anglada Cantarell, José María; Salsench Cabré, Juan; Peraire Ardèvol, Maria

1993-01-01

El concepto de soporte fue introducido en relación con los retenedores directos por BONWILL, a finales del siglo XIX, cuando estableció los primeros principios fundamentales de los retenedores directos, indicando la absoluta necesidad de la confección del tope oclusal de los mismos para evitar el enclavamiento en la encía de los elementos retenedor y recíproco (3), así como de toda la prótesis en general(9)...

Partial gastrectomy associated to anterior truncal vagotomy: alterations in metabolism of the calcium. Experimental study in rats Gastrectomia parcial e vagotomia troncular anterior: alterações no metabolismo de cálcio. Estudo experimental em ratos

Directory of Open Access Journals (Sweden)

Elisvânia Freitas dos Santos

2009-06-01

Full Text Available BACKGROUND: The calcium is not absorbed in the lack of hydrochloric acid and the osteomalacia and osteoporosis may occurs; it is well recognized in patients that had gastric resection. AIM: To evaluate the effects of the partial gastrectomy associated to anterior truncal vagotomy in the absorption and metabolism of calcium. METHODS: Eighteen adults male Wistar rats were submitted to partial gastrectomy associated to anterior truncal vagotomy (GXT, eight animals and the sham operation (10 animals, control group. The diet consumption and the weight gains of the animals were measured three times during the week. The animals received formulated experimental diet orally (AIN-93M by eight weeks. The serum calcium, urinary and fecal calcium, apparent absorption of the calcium, activity of the enzyme alkaline fosfatase and calcium in the bone were measured after 60 days. RESULTS: The sham operated animals showed higher diet consumption, weight gains, serum and urinary calcium, excretion of calcium in feces, apparent absorption of calcium and activity of the enzyme alkaline fosfatase (PRACIONAL: O cálcio não é absorvido na ausência de ácido clorídrico e a osteomalácia e osteoporose podem ocorrer; este fato é bem reconhecido em pacientes que se submeteram à gastrectomias. OBJETIVO: Avaliar os efeitos da gastrectomia parcial associada à vagotomia troncular anterior na absorção e metabolismo de cálcio. MÉTODOS: Dezoito ratos Wistar machos e adultos foram submetidos à gastrectomia parcial e vagotomia troncular anterior (oito animais e à laparotomia simples como grupo controle (10 animais. O consumo de dieta e o peso dos animais foram monitorados três vezes por semana. Os animais receberam dieta oral formulada experimentalmente (AIN-93M, durante 8 semanas. O cálcio sérico, cálcio urinário e fecal, absorção aparente de cálcio, atividade da enzima fosfatase alcalina e cálcio ósseo foram mensurados após 60 dias de observa

Tratamento da síndrome do túnel ulnar pela técnica da epicondilectomia parcial medial do cotovelo Treatment of cubital tunnel syndrome using the technique of medial partial epicondylectomy of the elbow

Directory of Open Access Journals (Sweden)

Marcio Eduardo de Melo Viveiros

2008-12-01

Full Text Available OBJETIVO: Analisamos retrospectivamente os resultados de 21 casos de síndrome cubital tratados cirurgicamente com a técnica da epicondilectomia parcial medial. MÉTODOS: No período de fevereiro de 2001 a outubro de 2006, 21 pacientes com síndrome do canal cubital foram tratados pela técnica da epicondilectomia parcial medial do cotovelo associada à neurólise do nervo ulnar. Destes, 12 (57,1% eram do sexo masculino. O lado direito foi o acometido em 15 (71,4% pacientes. A média da idade dos pacientes foi de 51,6 anos. Pela graduação de McGowan, seis (28,6% pacientes encontravam-se no grau I, 11 (52,3%, no grau II e quatro (19,1%, no grau III do período pré-operatório. RESULTADOS: O tempo médio de acompanhamento pós-operatório foi de 25,7 meses. No pós-operatório, os pacientes foram avaliados conforme a escala de pontos de Bishop, sendo que nove (42,8% apresentavam resultados excelentes, sete (33,3%, bons, três (14,2%, regulares e dois (9,5%, ruins. Nesta série, não se encontraram como complicações a instabilidade em valgo residual, a lesão permanente do nervo ulnar, a recidiva da compressão ou a subluxação do nervo ulnar. As complicações encontradas foram perda do arco de movimento em um (4,7% caso, infecção superficial em um (4,7% e um (4,7% com dor residual. CONCLUSÃO: Os resultados apresentados permitem concluir que a epicondilectomia parcial medial do cotovelo associada à neurólise do nervo ulnar é eficiente e segura para o tratamento da síndrome do canal cubital.OBJECTIVE: The authors made a retrospective analysis of the results of 21 cases of cubital syndrome that were surgically treated with the partial medial epicondylectomy. METHODS: From February 2001 to October 2006, 21 patients with cubital tunnel syndrome were treated with the technique of elbow partial medial epicondylectomy associated to neurolysis of the ulnar nerve. Of these patients, 12 (57.1% were male. The right side was involved in 15 (71

PLANNING YOUR REMOVALS

CERN Multimedia

Service déménagement; ST Division

1999-01-01

To give you better service and avoid lengthy delays, the Removals Service advises you to refrain from programming moves between 26 July and 3 September, as large-scale removals are already planned during this summer period.Thanking you in advance for your co-operation and understanding.Removals Service STTel. 74185 / Mobile 164017

[Low obstruction tract by system Reemex].

Science.gov (United States)

Bujons Tur, A; Errando Smet, C; Prados Saavedra, M; Báez, C; Arañó Bertrán, P; Gutiérrez Ruiz, C; Villavicencio Mavrich, H

2007-01-01

The Remeex system it's a sling with regulable tension created for the surgical correction of the female urinary incontinente. The system contains a varitensor central part of the protesis that regulates the tension of the uretra. The screwdriver that acts against the varitensor to the modify the tension under the uretra in the postop inmediately or time after also. We present a clinic case of a patient with diagnostic of urinary stress incontinence and the surgical treatment with advantages against others kind of systems used for incontinence treatment at this time.

[Computerized study of perioperative difficulties of stapedectomy].

Science.gov (United States)

Cadavid Zink, R; Ballivian, H; Gamboa, F J; Olaizola, F

1993-01-01

A retrospective study of 1035 stapedectomies was performed to assess the incidence of intraoperative complications between 1972-1990. We found 45.89% of complications. We divided this alterations in 6 groups: 1) hemorrhage (20.67%), 2) stapes, foot plate, oval window (8.40%), 3) alterations in the middle ear (6.85%), 4) alterations in the incus (3.76%), 5) alterations in the external ear canal (3.57%) and 6) problems with protesis or graf (2.60%). We have analyzed these complications. We propose to carry out the solutions.

THE ROMAN-CATHOLIC DEFINITIONS TO COMMEMORATIVE PARTICLES

Directory of Open Access Journals (Sweden)

MICHAIL ASMUS

2008-11-01

Full Text Available The author overviews and analyses selected Roman-Catholic theological texts deal-ing with the meaning of commemorative particles in the Protesis of the Byzantine rite dating back to the XV–XVIII centuries. Peter Arcudius is the key person because it was his theological doctrine that in 1720 brought on the Counsil decision about the trans-substantiation of particles. This work gives further development to the previous study of the particles’ conception in the Orthodox East carried out by the author in 2005 and published in this review (issue 14, 2005.

PROGRAMMING OFFICE REMOVALS

CERN Multimedia

Groupe ST-HM

2000-01-01

The Removals Service recommends you to plan your removals well in advance, taking into account the fact that the Transport and Handling Group’s main priority remains the dismantling of LEP and the installation of the LHC. The requests can be made by: http://st.web.cern.ch/st/hm/removal/DEMEE.HTM Thank you for your cooperation.

ARSENIC REMOVAL FROM DRINKING WATER BY IRON REMOVAL PLANTS

Science.gov (United States)

This report documents a long term performance study of two iron removal water treatment plants to remove arsenic from drinking water sources. Performance information was collected from one system located in midwest for one full year and at the second system located in the farwest...

Cardiomiectomia com fundoplicatura parcial videolaparoscópica no tratamento do megaesôfago não avançado: estudo de 50 casos

Directory of Open Access Journals (Sweden)

Carlos Eduardo Domene

Full Text Available Foram estudados prospectivamente cinqüenta pacientes com megaesôfago não avançado tratados por cardiomiectomia com fundoplicatura parcial por via laparoscópica, avaliados sob o ponto de vista clínico e funcional. Houve 12% de complicações intra-operatórias, duas complicações pós-operatórias imediatas e um óbito. Não houve conversões ou complicações tardias. Os resultados ótimos e bons somaram 97,9% dos casos. Houve tendência à diminuição radiológica do calibre do esôfago e desaparecimento da esofagite à endoscopia. A eletromanometria mostrou diminuição significativa da pressão média do esfíncter inferior do esôfago após a operação; a pHmetria de 24 horas constatou diminuição da estase esofágica e ausência de refluxo gastro-esofágico no pós-operatório. Não houve diferença entre os resultados do tratamento de pacientes com megaesôfago chagásico e não chagásico. Os pacientes tiveram o benefício da cirurgia laparoscópica de menor dor, rápida realimentação, alta precoce e breve retorno às atividades habituais.

Alterações morfológicas do fígado após secção hepática parcial e omentoplastia

Directory of Open Access Journals (Sweden)

Andy Petroianu

Full Text Available A omentoplastia é um método útil para o tratamento de traumas hepáticos graves. Apesar dos bons resultados dessa tática operatória para controlar a hemorragia, seus efeitos sobre a arquitetura hepática ainda não são bem conhecidos. Dessa forma, o presente trabalho teve como objetivo verificar a influência da omentoplastia em trauma experimental do fígado. Este estudo foi realizado em dez ratos submetidos a secção parcial do lobo hepático direito. Um segmento de omento maior foi introduzido dentro da ferida hepática, que foi suturada com fio de categute simples 5-0. Os animais foram seguidos durante sete (n=5 ou 21 (n=5 dias. Decorridos esses períodos, os aspectos macro e microscópicos do fígado foram avaliados. Todos os ratos suportaram a operação e sobreviveram durante o período estudado neste experimento. Os principais achados foram, no sétimo dia, necrose e abscessos do fígado distal à secção hepática. No 21° dia, a parte distal do fígado tornara-se fibrótica. Concluindo, a omentoplastia é de grande ajuda para controlar sangramentos hepáticos intensos decorrentes de trauma; porém, em ratos, a parte distal de uma ferida profunda muda suas características morfológicas.

Dam removal: Listening in

Science.gov (United States)

Foley, M. M.; Bellmore, J. R.; O'Connor, J. E.; Duda, J. J.; East, A. E.; Grant, G. E.; Anderson, C. W.; Bountry, J. A.; Collins, M. J.; Connolly, P. J.; Craig, L. S.; Evans, J. E.; Greene, S. L.; Magilligan, F. J.; Magirl, C. S.; Major, J. J.; Pess, G. R.; Randle, T. J.; Shafroth, P. B.; Torgersen, C. E.; Tullos, D.; Wilcox, A. C.

2017-07-01

Dam removal is widely used as an approach for river restoration in the United States. The increase in dam removals—particularly large dams—and associated dam-removal studies over the last few decades motivated a working group at the USGS John Wesley Powell Center for Analysis and Synthesis to review and synthesize available studies of dam removals and their findings. Based on dam removals thus far, some general conclusions have emerged: (1) physical responses are typically fast, with the rate of sediment erosion largely dependent on sediment characteristics and dam-removal strategy; (2) ecological responses to dam removal differ among the affected upstream, downstream, and reservoir reaches; (3) dam removal tends to quickly reestablish connectivity, restoring the movement of material and organisms between upstream and downstream river reaches; (4) geographic context, river history, and land use significantly influence river restoration trajectories and recovery potential because they control broader physical and ecological processes and conditions; and (5) quantitative modeling capability is improving, particularly for physical and broad-scale ecological effects, and gives managers information needed to understand and predict long-term effects of dam removal on riverine ecosystems. Although these studies collectively enhance our understanding of how riverine ecosystems respond to dam removal, knowledge gaps remain because most studies have been short (< 5 years) and do not adequately represent the diversity of dam types, watershed conditions, and dam-removal methods in the U.S.

EL RIEGO PARCIAL DE LA RAÍZ INCREMENTA LA PRODUCTIVIDAD DEL AGUA EN MANZANO EN UN AMBIENTE SEMI-ÁRIDO

Directory of Open Access Journals (Sweden)

J. A. Zegbe

2009-01-01

Full Text Available La sobre explotación de los acuíferos en el centro y norte de México requiere estrategias eficientes en la aplicación, ahorro y conservación del agua (oro azul para la sustentabilidad de los cultivos hortícolas como el manzano. Así, el objetivo de este estudio fue comparar el riego comercial (RC con el riego parcial de la raíz (RPR en relación al rendimiento y calidad del fruto a la cosecha. Se hizo énfasis en la productividad del agua (PA, en las relaciones hídricas, nutrición del árbol y en el comportamiento del fruto en postcosecha. Los tratamientos fueron: RC como testigo y el RPR. La PA se mejoró significativamente por el uso del RPR y resultó en un ahorro de 2.9 megalitros de agua de riego por hectárea. El rendimiento, componentes del rendimiento, crecimiento vegetativo, tamaño y calidad de la fruta a la cosecha no fueron modificados por los tratamientos de riego. La madera podada fue menor en árboles con RPR. El potencial hídrico, conductancia estomática y transpiración fueron menores en árboles con RPR que en árboles con RC. Excepto por calcio y boro, la concentración del resto de los nutrimentos fue similar entre tratamientos. Después de 18 días en almacenamiento, la calidad de la fruta fue igual entre tratamientos, pero la pérdida de peso de la fruta tendió a incrementarse en la fruta con RPR. En conclusión, el RPR es una estrategia de ahorro de agua de riego para la producción sustentable en manzano, principalmente para regiones donde el recurso hídrico es limitado.

Plate removal following orthognathic surgery.

Science.gov (United States)

Little, Mhairi; Langford, Richard Julian; Bhanji, Adam; Farr, David

2015-11-01

The objectives of this study are to determine the removal rates of orthognathic plates used during orthognathic surgery at James Cook University Hospital and describe the reasons for plate removal. 202 consecutive orthognathic cases were identified between July 2004 and July 2012. Demographics and procedure details were collected for these patients. Patients from this group who returned to theatre for plate removal between July 2004 and November 2012 were identified and their notes were analysed for data including reason for plate removal, age, smoking status, sex and time to plate removal. 3.2% of plates were removed with proportionally more plates removed from the mandible than the maxilla. 10.4% of patients required removal of one or more plate. Most plates were removed within the first post-operative year. The commonest reasons for plate removal were plate exposure and infection. The plate removal rates in our study are comparable to those seen in the literature. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

OS MODELOS DE EQUILÍBRIO PARCIAL COMO APOIO À TOMADA DE DECISÃO NO AGRONEGÓCIO BRASILEIRO: UMA ANÁLISE A PARTIR DOS MODELOS DE VANTAGENS COMPARATIVAS REVELADAS E ORIENTAÇÃO REGIONAL

Directory of Open Access Journals (Sweden)

Dr. João Armando Dessimon Machado

2008-03-01

Full Text Available O objetivo deste trabalho é demonstrar a importância dos modelos de equilíbrio parcial de Vantagens Comparativas Reveladas e Orientação Regional, geralmente utilizados em trabalhos de economia internacional, como apoio à tomada de decisão. Neste sentido, discute-se alguns trabalhos que se utilizaram desses modelos e, a partir dos resultados encontrados, constata-se que os modelos podem ser instrumentos úteis de tomada de decisão para a formulação de políticas de comércio internacional, a fim de que o país tenha estratégias amplas para uma maior competitividade nos mercados internacionais de produtos agroalimentares. Além disso, o país poderá desenvolver estratégias específicas para os principais parceiros comerciais e também em relação aos seus principais concorrentes no mercado internacional de determinado produto.

On-line diagnosis of high power motors based on ultra wide band partial discharge detection; Diagnostico en linea de motores de gran capacidad mediante la deteccion de descargas parciales utilizando tecnicas de banda ultra ancha

Energy Technology Data Exchange (ETDEWEB)

Carvajal M, F. Antonio; Garcia Colon H, Vicente R. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Asiain, Tomas [Instituto Politecnico Nacional, Escuela Superior de Ingenieria Mecanica y Electrica (Mexico)

2009-07-01

In this work a non-standardized method for on-line diagnostic of high capacity motors based on Ultra Wide Band (UWB) Partial Discharge (PD) measuring techniques is theoretically supported, implemented and applied. The method developed is non invasive and consist in the measurement of PD in the main motor power supply cables and its ground shields connection using a near field sensor (Rogowski coil, clamp-on type) with a bandwidth of 2 to 40 MHz. The measured signals by the sensor, are stretched electronically, digitized and fed to a conventional Partial Discharge digital detector. The UWB PD detection system used displays the output in a Pulse repetition frequency-Charge-Phase angle (N-Q-?) PD pattern. The results obtained in thirteen 2500 H.P., 13.8 kV motors performed during operating in an Oil Pumping facility are presented, including its analysis and comparison with values and PD patterns reported in literature. [Spanish] En este trabajo se presentan los fundamentos teoricos, la implementacion y aplicacion de un metodo no normalizado, para el diagnostico en linea de motores de gran capacidad, basado en la deteccion de Descargas Parciales (DP) utilizando tecnicas de medicion de Banda Ultra Ancha. El metodo desarrollado es no invasivo y consiste en la medicion de las DP en los conductores y conexiones a tierra de la pantalla de los cables principales de suministro de energia al motor, utilizando un sensor de campo cercano (bobina Rogowski, tipo gancho) cuyo ancho de banda de medicion es de 2 a 40 MHz. Las senales medidas por el sensor son electronicamente procesadas para ampliar su duracion, digitalizadas y enviadas a un detector digital de Descargas Parciales convencional. El sistema de deteccion de DP en Banda Ultra Ancha despliega la medicion en un patron de DP tipo frecuencia de repeticion de Pulso-Carga-Angulo de fase (N-Q-?). Se presentan los resultados obtenidos de la evaluacion en linea de trece motores de 2500 C.P. a 13.8 kV, instalados y operando en una

Análisis comparativo de diferentes sistemas de retenedores de precisión.

OpenAIRE

Dib, Viviana Noemí

2009-01-01

La presencia de un extremo libre en prótesis parcial removible implica un problema importante en la clínica. De hecho es conocido que existe una dificultad en el tratamiento multiplicando por 2,5 el riesgo de aparición de complicaciones. Las brechas sin pilar posterior son difíciles de restaurar, requieren de un soporte dentario y otro mucoso. La mucosa oral y el ligamento periodontal de los elementos dentarios pilares responden de manera diferente a las cargas. Esta diferencia de c...

Spider Vein Removal

Science.gov (United States)

Spider veins: How are they removed? I have spider veins on my legs. What options are available ... M.D. Several options are available to remove spider veins — thin red lines or weblike networks of ...

Hair removal in adolescence

Directory of Open Access Journals (Sweden)

Sandra Pereira

2015-06-01

Full Text Available Introduction: Due to hormonal stimulation during puberty, changes occur in hair type and distribution. In both sexes, body and facial unwanted hair may have a negative psychological impact on the teenager. There are several available methods of hair removal, but the choice of the most suitable one for each individual can raise doubts. Objective: To review the main methods of hair removal and clarify their indications, advantages and disadvantages. Development: There are several removal methods currently available. Shaving and depilation with chemicals products are temporary methods, that need frequent repetition, because hair removal is next to the cutaneous surface. The epilating methods in which there is full hair extraction include: epilation with wax, thread, tweezers, epilating machines, laser, intense pulsed light, and electrolysis. Conclusions: The age of beginning hair removal and the method choice must be individualized and take into consideration the skin and hair type, location, dermatological and endocrine problems, removal frequency, cost and personal preferences.

Optical hair removal.

Science.gov (United States)

Ort, R J; Anderson, R R

1999-06-01

Traditional methods of hair removal have proven unsatisfactory for many individuals with excessive or unwanted hair. In the last few years, several lasers and xenon flashlamps have been developed that promise to fulfill the need for a practical, safe, and long-lasting method of hair removal. Aggressive marketing of these has contributed to their popularity among patients and physicians. However, significant controversy and confusion surrounds this field. This article provides a detailed explanation of the scientific underpinnings for optical hair removal and explores the advantages and disadvantages of the various devices currently available (Nd:YAG, ruby, alexandrite, diode lasers, and xenon flashlamp). Treatment and safety guidelines are provided to assist the practitioner in the use of these devices. Although the field of optical hair removal is still in its infancy, initial reports of long-term efficacy are encouraging.

Particle adhesion and removal

CERN Document Server

Mittal, K L

2015-01-01

The book provides a comprehensive and easily accessible reference source covering all important aspects of particle adhesion and removal.  The core objective is to cover both fundamental and applied aspects of particle adhesion and removal with emphasis on recent developments.  Among the topics to be covered include: 1. Fundamentals of surface forces in particle adhesion and removal.2. Mechanisms of particle adhesion and removal.3. Experimental methods (e.g. AFM, SFA,SFM,IFM, etc.) to understand  particle-particle and particle-substrate interactions.4. Mechanics of adhesion of micro- and  n

Hair Removal

DEFF Research Database (Denmark)

Hædersdal, Merete

2011-01-01

Hair removal with optical devices has become a popular mainstream treatment that today is considered the most efficient method for the reduction of unwanted hair. Photothermal destruction of hair follicles constitutes the fundamental concept of hair removal with red and near-infrared wavelengths...... suitable for targeting follicular and hair shaft melanin: normal mode ruby laser (694 nm), normal mode alexandrite laser (755 nm), pulsed diode lasers (800, 810 nm), long-pulse Nd:YAG laser (1,064 nm), and intense pulsed light (IPL) sources (590-1,200 nm). The ideal patient has thick dark terminal hair......, white skin, and a normal hormonal status. Currently, no method of lifelong permanent hair eradication is available, and it is important that patients have realistic expectations. Substantial evidence has been found for short-term hair removal efficacy of up to 6 months after treatment with the available...

Hair removal

DEFF Research Database (Denmark)

Haedersdal, Merete; Haak, Christina S

2011-01-01

Hair removal with optical devices has become a popular mainstream treatment that today is considered the most efficient method for the reduction of unwanted hair. Photothermal destruction of hair follicles constitutes the fundamental concept of hair removal with red and near-infrared wavelengths...... suitable for targeting follicular and hair shaft melanin: normal mode ruby laser (694 nm), normal mode alexandrite laser (755 nm), pulsed diode lasers (800, 810 nm), long-pulse Nd:YAG laser (1,064 nm), and intense pulsed light (IPL) sources (590-1,200 nm). The ideal patient has thick dark terminal hair......, white skin, and a normal hormonal status. Currently, no method of lifelong permanent hair eradication is available, and it is important that patients have realistic expectations. Substantial evidence has been found for short-term hair removal efficacy of up to 6 months after treatment with the available...

Removal of radium from drinking water

International Nuclear Information System (INIS)

Lauch, R.P.

1992-08-01

The report summarizes processes for removal of radium from drinking water. Ion exchange, including strong acid and weak acid resin, is discussed. Both processes remove better than 95 percent of the radium from the water. Weak acid ion exchange does not add sodium to the water. Calcium cation exchange removes radium and can be used when hardness removal is not necessary. Iron removal processes are discussed in relation to radium removal. Iron oxides remove much less than 20 percent of the radium from water under typical conditions. Manganese dioxide removes radium from water when competition for sorption sites and clogging of sites is reduced. Filter sand that is rinsed daily with dilute acid will remove radium from water. Manganese dioxide coated filter sorption removes radium but more capacity would be desirable. The radium selective complexer selectively removes radium with significant capacity if iron fouling is eliminated

After-heat removing device

International Nuclear Information System (INIS)

Iwashige, Kengo; Otsuka, Masaya; Yokoyama, Iwao; Yamakawa, Masanori.

1990-01-01

The present invention concerns an after-heat removing device for first reactors. A heat accumulation portion provided in a cooling channel of an after-heat removing device is disposed before a coil-like heat conduction pipe for cooling of the after-heat removing device. During normal reactor operation, the temperature in the heat accumulation portion is near the temperature of the high temperature plenum due to heat conduction and heat transfer from the high temperature plenum. When the reactor is shutdown and the after-heat removing device is started, coolants cooled in the air cooler start circulation. The coolants arriving at the heat accumulation portion deprive heat from the heat accumulation portion and, ion turn, increase their temperature and then reach the cooling coil. Subsequently, the heat calorie possessed in the heat accumulation portion is reduced and the after-heat removing device is started for the operation at a full power. This can reduce the thermal shocks applied to the cooling coil or structures in a reactor vessel upon starting the after-heat removing device. (I.N.)

Wholesale debris removal from LEO

Science.gov (United States)

Levin, Eugene; Pearson, Jerome; Carroll, Joseph

2012-04-01

Recent advances in electrodynamic propulsion make it possible to seriously consider wholesale removal of large debris from LEO for the first time since the beginning of the space era. Cumulative ranking of large groups of the LEO debris population and general limitations of passive drag devices and rocket-based removal systems are analyzed. A candidate electrodynamic debris removal system is discussed that can affordably remove all debris objects over 2 kg from LEO in 7 years. That means removing more than 99% of the collision-generated debris potential in LEO. Removal is performed by a dozen 100-kg propellantless vehicles that react against the Earth's magnetic field. The debris objects are dragged down and released into short-lived orbits below ISS. As an alternative to deorbit, some of them can be collected for storage and possible in-orbit recycling. The estimated cost per kilogram of debris removed is a small fraction of typical launch costs per kilogram. These rates are low enough to open commercial opportunities and create a governing framework for wholesale removal of large debris objects from LEO.

Q-switched laser tattoo removal

Directory of Open Access Journals (Sweden)

Viljem H. topčič

2013-10-01

Full Text Available Background: Decorative tattooing gained popularity in many western countries throughout the 1990s. Some estimates show that approximately 10 % of men in the United States already have tattoos. However, tattoos often become a personal regret. As recent surveys suggest, 17 % of people that have obtained a tattoo and more than 50 % of adults over the age of 40 in the United States of America consider having them removed. The same trend can be observed in our country as well. Laser therapy is the gold standard for tattoo removal. In Slovenia, laser tattoo removal therapy is available and widely accessible. There is a wide range of facilities offering laser tattoo removal, ranging from different private clinics to beauty salons. Different facilities use different lasers, but not all lasers, however, are optimal for successful and complete tattoo removal, as inappropriate use can cause many unwanted side effects.Methods: Eleven (11 patients (2 men and 9 women requesting tattoo removal were treated in our department. When treating our patients, we used Fotona’s QX MAX quality-switched Nd:YAG laser which offers four different wavelengths in a single system; 1064 nm Nd:YAG was used to treat and remove dark pigments, 532 nm KTP for red, tan-colored, purple and orange tattoo inks, 650 nm dye for green tattoo inks and 585 nm dye for sky-blue colored inks.Results: Satisfactory tattoo removal was achieved in all patients treated. Patients were very satisfied with the success and the number of treatments needed for tattoo removal. There were mild unwanted side effects and the pain was moderate. The average number of treatments required for complete tattoo removal was less than 7, ranging from 3 to 21 treatments. Patients’ satisfaction with tattoo removal was estimated at 5.2 (on a scale from 1 to 6.Conclusions: Our study showed that Q-switched lasers successfully remove tattoo ink, however several treatments are required for satisfactory tattoo removal

Removal of arsenic and iron removal from drinking water using coagulation and biological treatment.

Science.gov (United States)

Pramanik, Biplob Kumar; Pramanik, Sagor Kumar; Suja, Fatihah

2016-02-01

Effects of biological activated carbon (BAC), biological aerated filter (BAF), alum coagulation and Moringa oleifera coagulation were investigated to remove iron and arsenic contaminants from drinking water. At an initial dose of 5 mg/L, the removal efficiency for arsenic and iron was 63% and 58% respectively using alum, and 47% and 41% respectively using Moringa oleifera. The removal of both contaminants increased with the increase in coagulant dose and decrease in pH. Biological processes were more effective in removing these contaminants than coagulation. Compared to BAF, BAC gave greater removal of both arsenic and iron, removing 85% and 74%, respectively. Longer contact time for both processes could reduce the greater concentration of arsenic and iron contaminants. The addition of coagulation (at 5 mg/L dosage) and a biological process (with 15 or 60 min contact time) could significantly increase removal efficiency, and the maximum removal was observed for the combination of alum and BAC treatment (60 min contact time), with 100% and 98.56% for arsenic and iron respectively. The reduction efficiency of arsenic and iron reduced with the increase in the concentration of dissolved organics in the feedwater due to the adsorption competition between organic molecules and heavy metals.

Skin lesion removal

Science.gov (United States)

... likely to be done when there is a concern about a skin cancer. Most often, an area the shape of an ellipse is removed, as this makes it easier to close with stitches. The entire lesion is removed, going as deep as the fat, if needed, to ...

PROPRIEDADES DE ARGAMASSAS COM EVA (ETHYLENE VINYL ACETATE EM SUBSTITUIÇÃO PARCIAL AO AGREGADO

Directory of Open Access Journals (Sweden)

Cleidson Carneiro Guimarães

2017-03-01

Full Text Available RESUMO: O setor da construção civil apresenta grande potencial para aproveitamento de vários tipos de resíduos industriais. A incorporação dos resíduos, principalmente nas argamassas e concretos, produtos com vasta aplicabilidade no setor, tem se mostrado como uma ótima alternativa na diversificação das matérias-primas e para a economia de recursos naturais. Esse trabalho avaliou as propriedades das argamassas, no estado fresco e endurecido, produzidas com substituição parcial da areia por resíduo de EVA (Ethylene Vinyl Acetate. Para isso, foram preparadas argamassas com teores de substituição do agregado 0% (referência, 5%, 10% e 15%, em massa. A relação água/cimento, para cada traço, foi determinada empiricamente e mantida constante para as argamassas com substituição. Os resultados apontam que as argamassas produzidas com agregado de EVA apresentam menor absorção de água e também um decréscimo da resistência mecânica. Desta forma, a produção de argamassas utilizando EVA em substituição ao agregado natural é viável, todavia é necessário avaliar os parâmetros mínimos de aplicação para cada finalidade. Dessa forma, o trabalho apresenta contribuição ao servir de suporte a gestores de empresas de argamassas ou gestores de obra a tomarem decisões acerca da inserção do resíduo de EVA na produção de argamassa. ABSTRACT: The construction sector has great potential for use of various types of industrial waste. The incorporation of waste, especially in mortar and concrete products with wide applicability in the industry, has proven to be a great alternative for diversification of raw materials and the economy of natural resources. This study evaluated the properties of mortars in fresh and hardened state, made with partial replacement of sand by waste EVA (Ethylene Vinyl Acetate. For this, mortars were prepared with substitution aggregate content 0%(reference, 5%, 10% and 15% by weight. The water

Consumo e digestibilidade total e parcial de dietas utilizando farelo de girassol e três fontes de energia em novilhos confinados Intake, total and partial digestibility of diets with sunflower meal and three energy sources in confined steers

Directory of Open Access Journals (Sweden)

Ana Rosália Mendes

2005-04-01

Full Text Available Avaliaram-se o consumo alimentar, a digestibilidade parcial e total e o balanço de nitrogênio, em novilhos confinados. Foram utilizados três novilhos de corte cruzados, canulados no rúmen e no duodeno, distribuídos em dois delineamentos em quadrado latino 3 x 3. As dietas experimentais foram constituídas de 60% de silagem de milho, tendo como fonte de proteína o farelo de girassol e, como fonte de energia, o milho (MI. O milho foi substituído parcialmente pela casca de soja (CS ou pelo farelo de gérmen de milho (FGM. Quatro indicadores internos (lignina e FDA, FDN e lignina indigestíveis foram submetidos a 144 horas de digestão in vitro, para estimativa da digestibilidade parcial e total das dietas. Houve maior ingestão dos componentes fibrosos na dieta CS, porém não foi observado efeito sobre o consumo de matéria seca. A lignina subestimou significativamente a digestibilidade. A utilização da FDAi, FDNi e lignina-i para estimar a digestibilidade total é viável, no entanto, a FDAi e lignina-i não estimaram adequadamente as digestibilidades parciais. Houve efeito significativo na digestibilidade ruminal da FDA, com valores mais elevados para CS e semelhantes para FGM, em relação à dieta MI. A digestibilidade total da FDA foi maior na dieta CS, porém, as digestibilidades dos demais componentes não foram afetadas pelas diferentes fontes energéticas. Não houve diferença significativa para a digestibilidade da energia e nos valores obtidos de NDT, com média de 61,5%. A casca de soja e o farelo de gérmen de milho, em substituição parcial do milho, mostraram-se fontes alternativas satisfatórias para a inclusão na dieta de bovinos.Feed intake, partial and total digestibility and nitrogen balance were evaluated in confined steers. Three crossbreed steers, rumen and duodenum cannulated, were allotted to two 3 x 3 Latin square experimental design. The experimental diets were composed by corn silage (60% and concentrate

Context-outcome associations underlie context-switch effects after partial reinforcement in human predictive learning

Directory of Open Access Journals (Sweden)

Juan M. Rosas

2012-01-01

Full Text Available El valor predictivo que se asigna a claves reforzadas de forma continua se ve afectado por el cambio de contexto cuando éstas se entrenan en un contexto en el que otra clave diferente recibe reforzamiento parcial. Se llevó a cabo un experimento con el objetivo de explorar el mecanismo que subyace a este efecto de cambio de contexto. Se entrenó a participantes humanos en una situación de aprendizaje predictivo en la que una clave recibía reforzamiento parcial mientras que una clave objetivo (C1 recibía reforzamiento continuo en el contexto A y una segunda clave objetivo (U2 no era reforzada en el contexto B. Los participantes del grupo Parcial-Uno no recibieron reforzamiento parcial en B, mientras que los participantes del grupo Parcial-Ambos recibieron el mismo entrenamiento que en el contexto A, pero con claves distintas. Cuando las claves objetivo se probaron en el grupo Parcial-Uno, se observó mayor respuesta en el contexto A que en el contexto B, aunque las diferencias fueron menores ante la clave U2 que ante C1. No se encontraron diferencias entre contextos en el grupo Parcial-Ambos. Estos resultados están en consonancia con la hipótesis de que el cambio de contexto tras el reforzamiento parcial se debe principalmente a la formación de asociaciones contexto-consecuencia, aunque la diferencia entre el tamaño del efecto sobre la clave reforzada y no reforzada sugiere que también podría estar implicado un mecanismo modulador en estos efectos de cambios de contexto

Tube plug removal machine

International Nuclear Information System (INIS)

Hawkins, P.J.

1987-01-01

In a nuclear steam generator wherein some faulty tubes have been isolated by mechanical plugging, to remove a selected plug without damaging the associated tube, a plug removal machine is used. The machine drills into a plug portion with a tap drill bit having a drill portion a tap portion and a threaded portion, engaging that plug portion with the threaded portion after the drilled hole has been threaded by the tap portion thereof, and removing a portion of the plug in the tube with a counterbore drill bit mounted concentrically about the tap drill bit. A trip pin and trip spline disengage the tap drill bit from the motor. The counterbore drill bit is thereafter self-centered with respect to the tube and plug about the now stationary tap drill bit. After a portion of the plug has been removed by the counterbore drill bit, pulling on the top drill bit by grippers on slots will remove the remaining plug portion from the tube. (author)

Arsenic removal by electrocoagulation process: Recent trends and removal mechanism.

Science.gov (United States)

Nidheesh, P V; Singh, T S Anantha

2017-08-01

Arsenic contamination in drinking water is a major issue in the present world. Arsenicosis is the disease caused by the regular consumption of arsenic contaminated water, even at a lesser contaminated level. The number of arsenicosis patients is increasing day-by-day. Decontamination of arsenic from the water medium is the only one way to regulate this and the arsenic removal can be fulfilled by water treatment methods based on separation techniques. Electrocoagulation (EC) process is a promising technology for the effective removal of arsenic from aqueous solution. The present review article analyzes the performance of the EC process for arsenic removal. Electrocoagulation using various sacrificial metal anodes such as aluminium, iron, magnesium, etc. is found to be very effective for arsenic decontamination. The performances of each anode are described in detail. A special focus has been made on the mechanism behind the arsenite and arsenate removal by EC process. Main trends in the disposal methods of sludge containing arsenic are also included. Comparison of arsenic decontamination efficiencies of chemical coagulation and EC is also reported. Copyright © 2017 Elsevier Ltd. All rights reserved.

Removal of radionuclides from household water

International Nuclear Information System (INIS)

Vesterbacka, P.; Turtiainen, T.; Haemaelaeinen, K.; Salonen, L.; Arvela, H.

2007-02-01

Research upon methods for removing radionuclides from household water was initiated in Finland in 1995. Three research projects, of which two were carried out with National Technology Agency of Finland and one with CEC, have been completed by the end of 2002. One of the main objectives of the research was to compose a guidebook for consumers and water treatment companies. Radon can be removed from household water by aeration and by activated carbon filtration. Aerators that are well designed and set up can remove over 90% of waterborne radon. The best aerators have achieved removal efficiencies that are nearly 100%. However, setting up an aeration system requires thorough planning. Also, activated carbon filtration removes radon efficiently. The removal efficiencies have been over 90%, often nearly 100%. Depending on the water quality and usage, the carbon batch inside the filter needs to be changed every 2 - 3 years. Since activated carbon filters emit gamma radiation while in use, they should not be installed inside the dwelling but in a separate building or by the well. It is recommended that uranium be removed from drinking water by anion exchange, which is the most efficient removal method for this purpose. Typically, the removal efficiencies are nearly 100%. The one exception is the so called tap filter, the removal efficiency of which depends on uranium concentration in raw water and the rate of water flow. High saline concentration in water may extricate uranium from ion exchange resin. Changes in plumbing pressure or pH-value do not have any significant influence in uranium retention. Removal efficiencies of lead and polonium vary a lot depending on the chemical form in which they occur in water. They can be reliably removed from water by reverse osmosis only. Other treatment methods, such as ion exchange and activated carbon filtration, remove lead and polonium partly. Lead and polonium are removed more efficiently when they are bound onto smaller

REMOVAL OF ARSENIC FROM DRINKING WATER SUPPLIES BY IRON REMOVAL PROCESS

Science.gov (United States)

This design manual is an in-depth presentation of the steps required to design and operate a water treatment plant for removal of arsenic in the As (V) form from drinking water using an iron removal process. The manual also discusses the capital and operating costs including many...

CRBRP decay heat removal systems

International Nuclear Information System (INIS)

Hottel, R.E.; Louison, R.; Boardman, C.E.; Kiley, M.J.

1977-01-01

The Decay Heat Removal Systems for the Clinch River Breeder Reactor Plant (CRBRP) are designed to adequately remove sensible and decay heat from the reactor following normal shutdown, operational occurrences, and postulated accidents on both a short term and a long term basis. The Decay Heat Removal Systems are composed of the Main Heat Transport System, the Main Condenser and Feedwater System, the Steam Generator Auxiliary Heat Removal System (SGAHRS), and the Direct Heat Removal Service (DHRS). The overall design of the CRBRP Decay Heat Removal Systems and the operation under normal and off-normal conditions is examined. The redundancies of the system design, such as the four decay heat removal paths, the emergency diesel power supplies, and the auxiliary feedwater pumps, and the diversities of the design such as forced circulation/natural circulation and AC Power/DC Power are presented. In addition to overall design and system capabilities, the detailed designs for the Protected Air Cooled Condensers (PACC) and the Air Blast Heat Exchangers (ABHX) are presented

Avaliação dos resultados da artroplastia parcial de ombro para tratamento da artropatia por lesão do manguito rotador Evaluating the results of partial shoulder arthroplasty for the treatment of arthropathy due to rotator cuff lesion

Directory of Open Access Journals (Sweden)

Sérgio Luiz Checchia

2008-06-01

Full Text Available OBJETIVO: Avaliar os resultados obtidos com a artroplastia parcial de ombro para o tratamento da artropatia por lesão do manguito rotador. MÉTODOS: No período de junho de 1989 a março de 2004, 11 ombros de 11 pacientes foram submetidos a artroplastia parcial de ombro para o tratamento de artropatia por LMR. O tempo de seguimento variou de 27 a 183 meses, com média de 69 meses. A idade média foi de 69,1 anos, variando de 44 a 78 anos. Houve predomínio do sexo feminino em 90,9% dos casos (10 pacientes. O membro dominante foi acometido em 10 pacientes. Os métodos escolhidos para avaliação dos pacientes, no seguimento pós-operatório, basearam-se nos critérios da UCLA; no índice de satisfação dos pacientes em relação ao alívio da dor; e no método de avaliação de objetivos limitados, proposto por Neer et al. RESULTADOS: O índice de satisfação dos pacientes em relação ao alívio da dor foi de 81,8%. Com o método de avaliação da UCLA, observamos média de 22,7 pontos. Por meio do método de avaliação de objetivos limitados, proposto por Neer et al, obtivemos seis pacientes com resultados satisfatórios e cinco insatisfatórios. CONCLUSÃO: A artroplastia parcial de ombro para o tratamento da artropatia por lesão do manguito rotador promove alívio do quadro doloroso e permite alguma melhora na função do membro para realização das atividades diárias; entretanto, é uma técnica que leva a altos índices de resultados insatisfatórios.OBJECTIVE: To evaluate the results achieved with partial arthroplasty of the shoulder to treat arthropathy due to rotator cuff lesion. METHODS: From June 1989 to March 2004, 11 shoulders of 11 patients were submitted to partial arthroplasty of the shoulder to treat an arthropathy due to rotator cuff lesion. Follow-up time varied from 27 to 182 months, with a mean of 69 months. Mean age was 69.1 years, ranging from 44 to 78 years. There was a predominance of the female gender, in 90.9% of

Removal of radionuclides from household water

International Nuclear Information System (INIS)

Vesterbacka, P.; Turtiainen, T.; Haemaelaeinen, K.; Salonen, L.; Arvela, H.

2003-10-01

Research upon methods for removing radionuclides from household water was initiated in Finland in 1995. Three research projects, of which two were carried out with National Technology Agency of Finland and one with CEC, have been completed by the end of 2002. One of the main objectives of the research was to compose a guidebook for consumers and water treatment companies. Radon can be removed from household water by aeration and by activated carbon filtration. Aerators that are well designed and set up can remove over 90% of waterborne radon. The best aerators have achieved removal efficiencies that are nearly 100%. However, setting up an aeration system requires thorough planning. Also, activated carbon filtration removes radon efficiently. The removal efficiencies have been over 90%, often nearly 100%. Depending on the water quality and usage, the carbon batch inside the filter needs to be changed every 2-3 years. Since activated carbon filters emit gamma radiation while in use, they should not be installed inside the dwelling but in a separate building or by the well. It is recommended that uranium be removed from drinking water by anion exchange, which is the most efficient removal method for this purpose. Typically, the removal efficiencies are nearly 100%. The one exception is the so called tap filter, the removal efficiency of which depends on uranium concentration in raw water and the rate of water flow. High saline concentration in water may extricate uranium from ion exchange resin. Changes in plumbing pressure or pH-value do not have any significant influence in uranium retention. Removal efficiencies of lead and polonium vary a lot depending on the chemical form in which they occur in water. They can be reliably removed from water by reverse osmosis only. Other treatment methods, such as ion exchange and activated carbon filtration, remove lead and polonium partly. Lead and polonium are removed more efficiently when they are bound onto smaller particles

Hot Spot Removal System: System description

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-09-01

Hazardous wastes contaminated with radionuclides, chemicals, and explosives exist across the Department of Energy complex and need to be remediated due to environmental concerns. Currently, an opportunity is being developed to dramatically reduce remediation costs and to assist in the acceleration of schedules associated with these wastes by deploying a Hot Spot Removal System. Removing the hot spot from the waste site will remove risk driver(s) and enable another, more cost effective process/option/remedial alternative (i.e., capping) to be applied to the remainder of the site. The Hot Spot Removal System consists of a suite of technologies that will be utilized to locate and remove source terms. Components of the system can also be used in a variety of other cleanup activities. This Hot Spot Removal System Description document presents technologies that were considered for possible inclusion in the Hot Spot Removal System, technologies made available to the Hot Spot Removal System, industrial interest in the Hot Spot Removal System`s subsystems, the schedule required for the Hot Spot Removal System, the evaluation of the relevant technologies, and the recommendations for equipment and technologies as stated in the Plan section.

Hot Spot Removal System: System description

International Nuclear Information System (INIS)

1997-09-01

Hazardous wastes contaminated with radionuclides, chemicals, and explosives exist across the Department of Energy complex and need to be remediated due to environmental concerns. Currently, an opportunity is being developed to dramatically reduce remediation costs and to assist in the acceleration of schedules associated with these wastes by deploying a Hot Spot Removal System. Removing the hot spot from the waste site will remove risk driver(s) and enable another, more cost effective process/option/remedial alternative (i.e., capping) to be applied to the remainder of the site. The Hot Spot Removal System consists of a suite of technologies that will be utilized to locate and remove source terms. Components of the system can also be used in a variety of other cleanup activities. This Hot Spot Removal System Description document presents technologies that were considered for possible inclusion in the Hot Spot Removal System, technologies made available to the Hot Spot Removal System, industrial interest in the Hot Spot Removal System''s subsystems, the schedule required for the Hot Spot Removal System, the evaluation of the relevant technologies, and the recommendations for equipment and technologies as stated in the Plan section

Quality of life and depression in patients undergoing total and partial laryngectomy Qualidade de vida e depressão em pacientes submetidos a laringectomia total e parcial

Directory of Open Access Journals (Sweden)

Daniella Scalet Amorin Braz

2005-04-01

Full Text Available PURPOSE: The surgical treatment of head and neck cancer, primarily laryngeal cancer, causes sequelae and can change the patient's quality of life. The purpose of this study was to investigate the impact of laryngectomy on the quality of life regarding the functional, physical, psychological, and social aspects. METHODS: Fourteen patients underwent total laryngectomy and 16 underwent vertical partial laryngectomy. The Quality of Life Core Questionnaire (QLQ-C30 and Head and Neck (H&N35 questionnaire from the European Organization for Research and Treatment of Cancer (EORTC were used for quality of life evaluation, while the Beck Depression Inventory questionnaire was used for the depression screen. RESULTS: In the total laryngectomy group, reported adverse effects were worsened, social and emotional function (21.3%, olfaction and taste changes (85.6%, cough (71.3%, speech difficulty (100%, and dysphagia (64.3%. Most of the patients (85.5% judged their quality of life to be reasonable. In the partial laryngectomy group, reported adverse effects were worsened, emotional function (71.4%, speech difficulty (100%, and dysphagia (31.3%. However, most of the patients judged their quality of life to be above the general average. CONCLUSION: Despite being different surgeries, both groups experienced similar difficulties but at different levels. The quality of life was judged worse in the patients who underwent total laryngectomy.OBJETIVO: O tratamento cirúrgico para o câncer de cabeça e pescoço, especificamente para o câncer de laringe, deixa seqüelas nos pacientes podendo alterar sua qualidade de vida. O objetivo deste estudo foi pesquisar o impacto na qualidade de vida, no que diz respeito aos aspectos funcionais, físicos, psicológicos, sociais e o rastreamento da depressão. MÉTODO: Foram estudados 14 pacientes submetidos a laringectomia total e 16 pacientes submetidos a laringectomia parcial vertical. Para a avaliação da qualidade de vida

Investigating the removal of body piercings.

Science.gov (United States)

Armstrong, Myrna L; Roberts, Alden E; Koch, Jerome R; Saunders, Jana C; Owen, Donna C

2007-05-01

Although body piercing procurement continues to increase, 13% to 18% of them are removed. Reasons for piercing removal in college students were examined with three groups: (a) those who kept all their piercings, (b) those who removed some, or (c) those who removed all of their body piercings. Of the sample, 41% were still pierced; 50% in their lifetime. Their major purpose for the body piercing was "helped them feel unique." Females obtained more (in high school) and then removed more, usually as upperclassmen. Males and females reported themselves as risk takers at procedure time and currently; however, only 10% cited deviancy as a reason for the body piercing(s). Only removal elements of "I just got tired of it" and "I just decided to remove it" were present, especially with the Some Removed Group. Further examination of body piercing building personal distinctiveness and self-identity to promote their need of uniqueness is suggested.

27 CFR 25.251 - Authorized removals.

Science.gov (United States)

2010-04-01

..., DEPARTMENT OF THE TREASURY LIQUORS BEER Removal of Brewer's Yeast and Other Articles § 25.251 Authorized removals. (a) Brewer's yeast. A brewer may remove brewer's yeast, in liquid or solid form containing not... including the words “Brewer's Yeast.” (c) Pipeline. If brewer's yeast is removed by pipeline, the pipeline...

[Acrylic resin removable partial dentures].

Science.gov (United States)

de Baat, C; Witter, D J; Creugers, N H J

2011-01-01

An acrylic resin removable partial denture is distinguished from other types of removable partial dentures by an all-acrylic resin base which is, in principle, solely supported by the edentulous regions of the tooth arch and in the maxilla also by the hard palate. When compared to the other types of removable partial dentures, the acrylic resin removable partial denture has 3 favourable aspects: the economic aspect, its aesthetic quality and the ease with which it can be extended and adjusted. Disadvantages are an increased risk of caries developing, gingivitis, periodontal disease, denture stomatitis, alveolar bone reduction, tooth migration, triggering of the gag reflex and damage to the acrylic resin base. Present-day indications are ofa temporary or palliative nature or are motivated by economic factors. Special varieties of the acrylic resin removable partial denture are the spoon denture, the flexible denture fabricated of non-rigid acrylic resin, and the two-piece sectional denture. Furthermore, acrylic resin removable partial dentures can be supplied with clasps or reinforced by fibers or metal wires.

Device for removing impurities from liquid metals

International Nuclear Information System (INIS)

Naito, Kesahiro; Yokota, Norikatsu; Shimoyashiki, Shigehiro; Takahashi, Kazuo; Ishida, Tomio.

1984-01-01

Purpose: To attain highly reliable and efficient impurity removal by forming temperature distribution the impurity removing device thereby providing the function of corrosion product trap, nuclear fission product trap and cold trap under the conditions suitable to the impurity removing materials. Constitution: The impurity removing device comprises a container containing impurity removing fillers. The fillers comprise material for removing corrosion products, material for removing nuclear fission products and material for removing depositions from liquid sodium. The positions for the respective materials are determined such that the materials are placed under the temperature conditions easy to attain their function depending on the temperature distribution formed in the removing device, whereby appropriate temperature condition is set to each of the materials. (Yoshino, Y.)

VDTT removal system functional design criteria

International Nuclear Information System (INIS)

Legare, D.E.

1996-01-01

Two Velocity Density Temperature Trees (H-2-815016) are to be removed from risers 14A and 1B of tank 241-SY-101. This document provides functional design criteria for the removal system. The removal system consists of a Liquid Removal Tool, Flexible Receiver (H-2-79216), Burial Container, Transport Trailers, and associated equipment

Lipídios plasmáticos após esplenectomia total e parcial em cães

Directory of Open Access Journals (Sweden)

Danilo Nagib Salomão Paulo

Full Text Available OBJETIVO: Avaliar o efeito da esplenectomia total e parcial (hemiesplenectomia e esplenectomia subtotal no lipidograma de cães. MÉTODO: Foram operados 38 animais, adultos, machos, mestiços, com peso entre 13kg e 15kg. No pré-operatório, depois do exame clínico e jejum de 12 horas de uma dieta-padrão, foram realizados hemograma e lipidograma. Após anestesia geral com tiopental sódico os cães foram submetidos à laparotomia mediana supra e infra-umbilical. Procedeu-se no grupo 1, de sete cães, apenas à manipulação do baço (simulado; no grupo 2, de nove cães, à hemiesplenectomia cranial; no grupo 3, de nove cães, à esplenectomia subtotal, com preservação do pólo inferior do baço, após ligadura e secção dos troncos principais dos vasos esplênicos próximos ao hilo; e no grupo 4, de 13 cães, à esplenectomia total. RESULTADOS: No grupo 4 (esplenectomia total, quando comparamos os valores do lipidograma dos diferentes períodos pós-operatórios com os do pré-operatório, os nossos resultados mostraram que houve aumento significante do colesterol total em todos os períodos pós-operatórios (p 0,05 no 56º PO. O LDL aumentou significantemente no 56º PO (p < 0,01 em relação também aos demais períodos do pós-operatório. Os triglicerídeos e VLDL não apresentaram alterações significantes. Nos animais dos grupos 1 e 3 não houve alterações significantes. Nos do grupo 2, houve aumento significante do colesterol no 7º PO. Não houve diferença estatisticamente significante de peso entre os remanescentes das esplenectomias parciais. CONCLUSÕES: A análise dos resultados nos permitiu concluir que a esplenectomia total induz aumento significante do colesterol total, das frações HDL e LDL, enquanto os níveis de triglicerídios e a fração VLDL não sofrem alterações; a conservação da metade inferior do baço ou a esplenectomia subtotal, com preservação do pólo inferior, protege o animal de alterações lip

Techniques for removing contaminated concrete surfaces

International Nuclear Information System (INIS)

Halter, J.M.; Sullivan, R.G.

1981-01-01

This discussion compares various techniques that have been used to clean concrete surfaces by removing the surface. Three techniques which have been investigated by the Pacific Northwest Laboratory for removing surfaces are also described: the water cannon, the concrete spaller, and high-pressure water jet. The equipment was developed with the assumption that removal of the top 1/8 to 1/4 in. of surface would remove most of the contamination. If the contamination has gone into cracks or deep voids in the surface, the removal processes can be repeated until the surface is acceptable

Ultrasound-guided removal of Implanon devices.

LENUS (Irish Health Repository)

Persaud, T

2008-11-01

Our study has shown that ultrasound-guided localisation and removal of Implanon rods is safe, practical and highly successful. Over a 4-year period, 119 patients had successful, uncomplicated removal of their subdermal devices.The technique is particularly useful for removal of the device when it is not palpable or when an attempt at removal of a palpable device has not been successful.

Mecanismos de Defensa del Hospedero en Estomatitis Sub-Protesica Inducida por Candida

OpenAIRE

Cardozo de Pardi, Elba Inés

2002-01-01

La Estomatitis Sub-Protésica (E.S.P.) es una entidad que se localiza principalmente en la mucosa del paladar que se encuentra por debajo de la superficie de ajuste de las prótesis removibles parciales y totales. Esta patología es más común en mujeres que en hombres y se observa más frecuentemente en sujetos con edades comprendidas entre 25 y 90 años. Diversos estudios han revelado que la E.S.P. está asociada con la detección de especies de Candida y de otros microorganismos, mientras que otro...

Carbon dioxide removal with inorganic membranes

Energy Technology Data Exchange (ETDEWEB)

Judkins, R.R.; Fain, D.E. [Oak Ridge National Laboratory, TN (United States)

1993-12-31

The increasing concentrations of greenhouse gases, particularly carbon dioxide, in the atmosphere has sparked a great deal of interest in the removal of CO{sub 2} from flue gases of fossil fueled plants. Presently, several techniques for the removal of CO{sub 2} are considered to have potential, but are lacking in practicality. For example, amine scrubbing of flue gas streams is potential, but are lacking in practically. For example, amine scrubbing of flue gas streams is effective in removing CO{sub 2}, but costs are high; efficiency suffers; and other acid gases must be removed prior to amine stripping. Membrane systems for CO{sub 2} removal are held in high regard, and inorganic, particularly ceramic, membranes offer the potential for high temperature, thus energy saving, removal.

Uranium material removing and recovering device

International Nuclear Information System (INIS)

Takita, Shin-ichi.

1997-01-01

A uranium material removing and recovering device for use in removing surplus uranium heavy metal (UO 2 ) generated in a uranium handling facility comprises a uranium material removing device and a uranium material recovering device. The uranium material removing device comprises an adsorbing portion filled with a uranium adsorbent, a control portion for controlling the uranium adsorbent of the uranium adsorbing portion by a controlling agent, a uranium adsorbing device connected thereto and a jetting device for jetting the adsorbing liquid to equipments deposited with uranium. The recovering device comprises a recovering apparatus for recovering uranium materials deposited with the adsorbent liquid removed by the jetting device and a recovering tank for storing the recovered uranium materials. The device of the present invention can remove surplus uranium simply and safely, mitigate body's load upon removing and recovering operations, facilitate the processing for the exchange of the adsorbent and reduces the radioactive wastes. (T.M.)

Device for removing fur

International Nuclear Information System (INIS)

Hanawa, Minoru; Nakagawa, Takao; Sakuma, Toyoo; Yonemura, Eizo.

1976-01-01

Purpose: To effectively remove fur adhered to fuel rods and to increase working efficiency without use of a lengthy hose. Constitution: In the fur removing device of the present invention, brushes rotated by gears are provided within a casing so that fur adhered to the fuel rods are removed by the brushes and water is rotatably moved by blades housed therein to outwardly blow fur floating in water by means of a centrifugal force. Then, the fur is filtered by a filter outwardly provided. In this way, the fur may be collected within the device to avoid contamination to others. (Kamimura, M.)

Functional evaluation of oral rehabilitation with removable partial dentures after five years Avaliação funcional da reabilitação oral com prótese parcial removível após cinco anos

Directory of Open Access Journals (Sweden)

Dúcia Caldas Cosme

2006-04-01

Full Text Available Most removable partial denture (RPD wearers are satisfied with their prostheses, but the factors that influence satisfaction and acceptance are still not determined. OBJECTIVE: This study explored technical, biological, and satisfaction variables for the functioning of RPDs after five years, and compared the evaluation by the patient and by the clinician. MATERIAL AND METHODS: Fifty adults (39 females, 11 males were re-examined after five years of RPD service. Data were collected through clinical examination and a structured questionnaire to record the conditions of supporting soft tissues, prosthesis acceptance and technical characteristics, mastication, esthetics, comfort, hygiene, and need for professional intervention. Data were analyzed by descriptive statistics and Spearman correlation. RESULTS: More than 50% of patients classified their RPDs as excellent regarding retention, mastication, esthetics, comfort, and hygiene. In the professional evaluation, retention and stability were considered excellent in more than 66% of cases, and hygiene of teeth and prostheses was considered good in 52% and 46%, respectively. The metallic framework and acrylic base were considered adapted in 92% of cases. Prosthesis acceptance was associated with retention, mastication, esthetics, hygiene, and comfort evaluated by the patient, and with retention, stability, and condition of the framework evaluated by the clinician. Retention and mastication/comfort evaluated by the patient had moderate positive correlation with retention and stability measured by the clinician. There was no association of hygiene evaluation by the patient and by the clinician. CONCLUSIONS: After five years, the oral rehabilitation with RPDs was satisfactory for most cases. There was correspondence between retention/retention and mastication-comfort/stability variables evaluated by the patient and by the clinician. Oral and prosthesis hygiene were not related.A maioria dos usuários de

TMI-2 reactor vessel head removal

International Nuclear Information System (INIS)

Bengel, P.R.; Smith, M.D.; Estabrook, G.A.

1984-12-01

This report describes the safe removal and storage of the Three Mile Island Unit 2 reactor vessel head. The head was removed in July 1984 to permit the removal of the plenum and the reactor core, which were damaged during the 1979 accident. From July 1982, plans and preparations were made using a standard head removal procedure modified by the necessary precautions and changes to account for conditions caused by the accident. After data acquisition, equipment and structure modifications, and training the head was safely removed and stored and the internals indexing fixture and a work platform were installed on top of the vessel. Dose rates during and after the operation were lower than expected; lessons were learned from the operation which will be applied to the continuing fuel removal operations activities

TMI-2 reactor vessel head removal

International Nuclear Information System (INIS)

Bengel, P.R.; Smith, M.D.; Estabrook, G.A.

1985-09-01

This report describes the safe removal and storage of the Three Mile Island Unit 2 (TMI-2) reactor vessel head. The head was removed in July 1984 to permit the removal of the plenum and the reactor core, which were damaged during the 1979 accident. From July 1982, plans and preparations were made using a standard head removal procedure modified by the necessary precautions and changes to account for conditions caused by the accident. After data acquisition, equipment and structure modifications, and training, the head was safely removed and stored; and the internals indexing fixture and a work platform were installed on top of the vessel. Dose rates during and after the operation were lower than expected; lessons were learned from the operation which will be applied to the continuing fuel removal operations activities

Bisphenol A Removal by Submerged Macrophytes and the Contribution of Epiphytic Microorganisms to the Removal Process.

Science.gov (United States)

Zhang, Guosen; Wang, Yu; Jiang, Jinhui; Yang, Shao

2017-06-01

Bisphenol A (BPA), a typical endocrine disruptor, has been found in global aquatic environments, causing great concern. The capabilities of five common submerged macrophytes to remove BPA from water and the contributions of epiphytic microorganisms were investigated. Macrophytes removed 62%-100% of total BPA (5 mg/L) over 12 days; much higher rates than that observed in the control (2%, F = 261.511, p = 0.000). Ceratophyllum demersum was the most efficient species. C. demersum samples from lakes with different water qualities showed no significant differences in BPA removal rates. Moreover, removal, inhibition or re-colonization of epiphytic microorganisms did not significantly change the BPA removal rates of C. demersum. Therefore, the contributions of epiphytic microorganisms to the BPA removal process were negligible. The rate of BPA accumulation in C. demersum was 0.1%, indicating that BPA was mainly biodegraded by the macrophyte. Hence, submerged macrophytes, rather than epiphytic microorganisms, substantially contribute to the biodegradation of BPA in water.

Avaliação da reologia, da RAA e das propriedades de argamassas no estado fresco utilizando cinza de eucalipto como substituição parcial ao cimento Portland

Directory of Open Access Journals (Sweden)

Débhora Flávia Soto França

Full Text Available Resumo De acordo com o Balanço Energético Nacional (ano-base 2013, o consumo nacional de lenha foi de 79,29 milhões de toneladas. Estima-se uma geração de cinza na ordem de 3% durante esse processo, o que ocasiona problemas de armazenamento e de descarte. Sendo assim, a potencial transformação desses resíduos em matéria-prima para elementos construtivos apresenta-se como uma oportunidade para a preservação do meio ambiente e para a redução do custo de materiais da construção civil. O presente trabalho objetiva, portanto, avaliar a viabilidade desse reaproveitamento por meio da análise das propriedades das argamassas no estado fresco, incluindo a reologia, além da reatividade potencial (RAA, utilizando cinza proveniente da queima de cavacos de eucalipto com teores de 10%, 20% e 30% de substituição, em massa, ao cimento Portland. Através dos ensaios realizados verificou-se que a utilização da cinza de eucalipto como substituição parcial ao cimento não altera significativamente as propriedades de argamassas no estado fresco e não apresenta reatividade significativa, apresentando-se como uma alternativa de uso tecnicamente viável.

Tattoo removal with ingenol mebutate.

Science.gov (United States)

Cozzi, Sarah-Jane; Le, Thuy T; Ogbourne, Steven M; James, Cini; Suhrbier, Andreas

2017-01-01

An increasing number of people are getting tattoos; however, many regret the decision and seek their removal. Lasers are currently the most commonly used method for tattoo removal; however, treatment can be lengthy, costly, and sometimes ineffective, especially for certain colors. Ingenol mebutate is a licensed topical treatment for actinic keratoses. Here, we demonstrate that two applications of 0.1% ingenol mebutate can efficiently and consistently remove 2-week-old tattoos from SKH/hr hairless mice. Treatment was associated with relocation of tattoo microspheres from the dermis into the posttreatment eschar. The skin lesion resolved about 20 days after treatment initiation, with some cicatrix formation evident. The implications for using ingenol mebutate for tattoo removal in humans are discussed.

Removal of root filling materials.

LENUS (Irish Health Repository)

Duncan, H.F. Chong, B.S.

2011-05-01

Safe, successful and effective removal of root filling materials is an integral component of non-surgical root canal re-treatment. Access to the root canal system must be achieved in order to negotiate to the canal terminus so that deficiencies in the original treatment can be rectified. Since a range of materials have been advocated for filling root canals, different techniques are required for their removal. The management of commonly encountered root filling materials during non-surgical re-treatment, including the clinical procedures necessary for removal and the associated risks, are reviewed. As gutta-percha is the most widely used and accepted root filling material, there is a greater emphasis on its removal in this review.

Partial chemical characterization of antigenic preparations of chromoblastomycosis agents Caracterização química parcial de preparações antigênicas de agentes da cromoblastomicose

Directory of Open Access Journals (Sweden)

Tania Fraga BARROS

1999-11-01

Full Text Available Antigenic preparations (saline, methylic, metabolic and exoantigens of four agents of chromoblastomycosis, Fonsecaea pedrosoi, Phialophora verrucosa, Cladophialophora (Cladosporium carrionii and Rhinocladiella aquaspersa were obtained. Partial chemical characterization of these antigenic preparations was obtained by determination of the levels of total lipids, protein, and carbohydrates, and identification of the main sterols and carbohydrates. Methylic antigens presented the highest lipid contents, whereas metabolic antigens showed the highest carbohydrate content. Total lipid, protein, and carbohydrate levels were in the range of 2.33 to 2.00mg/ml, 0.04 to 0.02 mg/ml and 0.10 to 0.02 mg/ml, respectively, in the methylic antigens and in the range of 0.53 to 0.18mg/ml, 0.44 to 0.26mg/ml, and 1.82 to 1.02 mg/ml, respectively, in saline antigens. Total lipid, protein, and carbohydrate contents were in the range of 0.55 to 0.20mg/ml, 0.69 to 0.57mg/ml and 10.73 to 5.93mg/ml, respectively, in the metabolic antigens, and in the range of 0.55 to 0.15mg/ml, 0.62 to 0.20mg/ml and 3.55 to 0.42mg/ml, respectively, in the exoantigens. Phospholipids were not detected in the preparations. Saline and metabolic antigens and exoantigens presented hexose and the methylic antigen revealed additional pentose units in their composition. The UV light absorption spectra of the sterols revealed squalene and an ergosterol fraction in the antigens. The characterization of these antigenic preparations may be useful for serological evaluation of patients of chromoblastomycosis.Preparações antigênicas (antígenos salinos, metílicos, metabólicos e exoantígenos de quatro agentes da cromoblastomicose, Fonsecaea pedrosoi, Phialophora verrucosa, Cladophialophora (Cladosporium carrionii e Rhinocladiella aquaspersa foram obtidos e foi determinada a caracterização química parcial dos mesmos. Os antígenos metílicos apresentaram os maiores teores de lípides enquanto os

Ultrasonic Abrasive Removal Of EDM Recast

Science.gov (United States)

Mandel, Johnny L.; Jacobson, Marlowe S.

1990-01-01

Ultrasonic abrasive process removes layer of recast material generated during electrical-discharge machining (EDM) of damper pocket on turbine blade. Form-fitted tool vibrated ultrasonically in damper pocket from which material removed. Vibrations activate abrasive in pocket. Amount of material removed controlled precisely.

Removable bearing arrangement for a wind turbine generator

Science.gov (United States)

Bagepalli, Bharat Sampathkumaran; Jansen, Patrick Lee; Gadre, Aniruddha Dattatraya

2010-06-15

A wind generator having removable change-out bearings includes a rotor and a stator, locking bolts configured to lock the rotor and stator, a removable bearing sub-assembly having at least one shrunk-on bearing installed, and removable mounting bolts configured to engage the bearing sub-assembly and to allow the removable bearing sub-assembly to be removed when the removable mounting bolts are removed.

Tattoo removal with ingenol mebutate

Science.gov (United States)

Cozzi, Sarah-Jane; Le, Thuy T; Ogbourne, Steven M; James, Cini; Suhrbier, Andreas

2017-01-01

An increasing number of people are getting tattoos; however, many regret the decision and seek their removal. Lasers are currently the most commonly used method for tattoo removal; however, treatment can be lengthy, costly, and sometimes ineffective, especially for certain colors. Ingenol mebutate is a licensed topical treatment for actinic keratoses. Here, we demonstrate that two applications of 0.1% ingenol mebutate can efficiently and consistently remove 2-week-old tattoos from SKH/hr hairless mice. Treatment was associated with relocation of tattoo microspheres from the dermis into the posttreatment eschar. The skin lesion resolved about 20 days after treatment initiation, with some cicatrix formation evident. The implications for using ingenol mebutate for tattoo removal in humans are discussed. PMID:28579816

Arsenic removal for ceramic water filters

Directory of Open Access Journals (Sweden)

Mishant Kumar

2013-02-01

Full Text Available Arsenic in drinking water is a hazard to human health and is a known carcinogen (Mass 1992. Resource Development International – Cambodia (RDIC has researched, developed, and manufactured simple ceramic water fi lters (CWF which have proved to be extremely effective in removing pathogens from water. These fi lters however, do not remove arsenic from water, which exists in the source water at levels above the World Health Organisation (WHO guideline of 10μg/L. The aims of this literature based study were to investigate conventional and non-conventional arsenic removal processes, and to discuss the options for applying an arsenic removal technology to the CWFs produced by RDIC. It was found that conventional arsenic removal technologies are diffi cult to implement in the context of household water treatment in a developing country. This study suggested that non-conventional arsenic removal technologies shall be more effective and that field studies must be undertaken to verify the success of such methods.

Potencialidades de um caulim calcinado como material de substituição parcial do cimento portland em argamassas Potentialities of a calcined kaolin as material of partial replacement of portland cement in mortars

Directory of Open Access Journals (Sweden)

Marilia P. de Oliveira

2006-06-01

Full Text Available A utilização de argilas calcinadas na forma de metacaulinita, como material pozolânico para argamassas e concretos, tem recebido atenção considerável nos últimos anos. Este trabalho objetivou avaliar o desempenho mecânico de argamassas, nas quais foi utilizado um caulim calcinado proveniente do Estado da Paraíba, como material de substituição parcial do cimento Portland. Utilizaram-se duas finuras do caulim: passando nas peneiras ABNT 200 (0,074 mm e 325 (0,044 mm e calcinados nas temperaturas de 700, 800 e 900 ºC pelo tempo de 2 h. As amostras foram caracterizadas através de análise química, análise térmica diferencial, difração de raios-X e área específica. Obteve-se o índice de atividade pozolânica com a cal e o cimento Portland. O percentual de substituição adotado foi de 0, 10, 20, 30 e 40%. A relação aglomerante: areia foi de 1:1,5 e a relação água/aglomerante fixada igual 0,4. O efeito da substituição parcial do cimento na argamassa foi avaliado através da resistência à compressão simples, nas idades de 7, 28 e 90 dias. As argamassas estudadas apresentaram resistência superior em relação à da referência, até o nível de 30% de substituição.The use of burnt clays, in the metakaolin form, as pozzolanic material for mortars and concretes has received a remarkable attention in the last years. This paper aimed to evaluate the mechanical property of mortars, in which a calcined kaolin originating from the State of Paraiba, was used as partial cement replacement material. Two finess of the kaolin were used: ABNT 200 (0.074 mm and 325 (0.044 mm and burnt at temperatures of 700, 800 and 900 ºC for a period of 2 h. Both materials were characterized by chemical analysis, differential thermal analysis, X-ray diffraction, specific area tests. The pozolanic activity index was obtanied using lime and cement Portland. The amounts of replacement were 10, 20, 30 and 40%, besides the reference mortar. The binder

Ingestion of polydextrose increase the iron absorption in rats submitted to partial gastrectomy A ingestão de polidextrose aumenta a absorção de ferro em ratos submetidos à gastrectomia parcial

Directory of Open Access Journals (Sweden)

Elisvânia Freitas dos Santos

2010-12-01

Full Text Available PURPOSE: To investigate whether polydextrose stimulates iron absorption in rats submitted to partial gastrectomy and sham operated. METHODS: The rats were submitted to partial gastrectomy (Billroth II or laparotomy (sham-operated control, in groups of 20 and 20 each respectively. The animals were fed with a control diet (AIN-93M without polydextrose or a diet containing polydextrose (50g/Kg of diet for eight weeks. They were divided into four subgroups: sham-operated and Billroth II gastrectomy and with or without polydextrose. Two animals died during the experiment. All rats submitted to gastrectomy received B-12 vitamin (intramuscular each two weeks. The hematocrit and hemoglobin concentration were measured at the start and on day 30 and 56 after the beginning of the experimental period. At the end of the study, the blood was collected for determination of serum iron concentration. RESULTS: The diet with polydextrose reduced the excretion of iron. Apparent iron absorption was higher in the polydextrose fed groups than in the control group. The haematocrit and haemoglobin concentration were lower after Billroth II gastrectomy rats fed the control diet as compared to the polydextrose diet groups. CONCLUSION: Polydextrose increase iron absorption and prevents postgastrectomy anemia.OBJETIVO: Investigar se a polidextrose estimula a absorção de ferro em ratos submetidos à gastrectomia parcial e sham operados. MÉTODOS: Os ratos foram submetidos à gastrectomia parcial (Billroth II e à laparotomia (controle sham-operados em grupos de 20 e 20 cada, respectivamente. Os animais foram alimentados com uma dieta controle (AIN-93M, sem polidextrose ou uma dieta contendo polidextrose (50g/kg de dieta durante oito semanas. Foram divididos em quatro grupos: sham-operados e com gastrectomia BII e com ou sem polidextrose. Dois animais morreram durante o experimento. Todos os ratos com gastrectomia receberam vitamina B-12 (intramuscular a cada duas semanas

[Conventional retaining of removable partial dentures

NARCIS (Netherlands)

Keltjens, H.M.A.M.; Witter, D.J.; Creugers, N.H.J.

2009-01-01

Mechanical and biological criteria have to be met in retaining the metal frame of a removable partial denture. Additionally, a removable partial denture is part of the occlusal interface by the clasps and the denture teeth. With respect to mechanical aspects, all rigid parts of the removable partial

Equilibria in social belief removal [Journal article

CSIR Research Space (South Africa)

Booth, R

2010-08-01

Full Text Available removal function >i, which tells it how to remove any given sentence from its belief set. In this paper we view >i as a unary function on the set L of non- tautologous sentences, i.e., agents are never required to remove >. The result of removing 2 L... from i?s belief set is denoted by >i( ). We assume i?s initial belief set can always be recaptured from >i alone by just removing the (b) (1) (A) contradiction, i.e., i?s initial belief set is >i(?). We call any n-tuple (>i)i2A of removal functions a...

30 CFR 75.213 - Roof support removal.

Science.gov (United States)

2010-07-01

... mining experience shall perform permanent roof support removal work. (b) Prior to the removal of... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Roof support removal. 75.213 Section 75.213... MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Roof Support § 75.213 Roof support removal. (a)(1) All...

33 CFR 159.85 - Sewage removal.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Sewage removal. 159.85 Section...) POLLUTION MARINE SANITATION DEVICES Design, Construction, and Testing § 159.85 Sewage removal. The device must be designed for efficient removal of nearly all of the liquid and solids in the sewage retention...

Removal of particulates from nuclear offgas

International Nuclear Information System (INIS)

Burchsted, C.A.

1976-01-01

Particulate removal from nuclear offgases can be broken down into three parts: pretreatment, prefiltration, and absolute filtration. Pretreatment, using conventional air cleaning devices in most cases, is sometimes required to temper the gases and remove heavy concentrations of particulate matter. Prefiltration, if required, serves primarily to protect the final filter stages from heavy dust loadings in order to extend their life. HEPA filters are the most commonly used ''absolute'' filtration devices and are always required for removal of submicrometer particulates that cannot be removed effectively by other devices

Prolapse Recurrence after Transvaginal Mesh Removal.

Science.gov (United States)

Rawlings, Tanner; Lavelle, Rebecca S; Coskun, Burhan; Alhalabi, Feras; Zimmern, Philippe E

2015-11-01

We determined the rate of pelvic organ prolapse recurrence after transvaginal mesh removal. Following institutional review board approval a longitudinally collected database of women undergoing transvaginal mesh removal for complications after transvaginal mesh placement with at least 1 year minimum followup was queried for pelvic organ prolapse recurrence. Recurrent prolapse was defined as greater than stage 1 on examination or the need for reoperation at the site of transvaginal mesh removal. Outcome measures were based on POP-Q (Pelvic Organ Prolapse Quantification System) at the last visit. Patients were grouped into 3 groups, including group 1--recurrent prolapse in the same compartment as transvaginal mesh removal, 2--persistent prolapse and 3--prolapse in a compartment different than transvaginal mesh removal. Of 73 women 52 met study inclusion criteria from 2007 to 2013, including 73% who presented with multiple indications for transvaginal mesh removal. The mean interval between insertion and removal was 45 months (range 10 to 165). Overall mean followup after transvaginal mesh removal was 30 months (range 12 to 84). In group 1 (recurrent prolapse) the rate was 15% (6 of 40 patients). Four women underwent surgery for recurrent prolapse at a mean 7 of months (range 5 to 10). Two patients elected observation. The rate of persistent prolapse (group 2) was 23% (12 of 52 patients). Three women underwent prolapse reoperation at a mean of 10 months (range 8 to 12). In group 3 (de novo/different compartment prolapse) the rate was 6% (3 of 52 patients). One woman underwent surgical repair at 52 months. At a mean 2.5-year followup 62% of patients (32 of 52) did not have recurrent or persistent prolapse after transvaginal mesh removal and 85% (44 of 52) did not undergo any further procedure for prolapse. Specifically for pelvic organ prolapse in the same compartment as transvaginal mesh removal 12% of patients had recurrence, of whom 8% underwent prolapse repair

27 CFR 25.206 - Removal of beer.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Removal of beer. 25.206... OF THE TREASURY LIQUORS BEER Removals Without Payment of Tax Beer for Personal Or Family Use § 25.206 Removal of beer. Beer made under § 25.205 may be removed from the premises where made for personal or...

Guidelines for removing permanent makeup

Directory of Open Access Journals (Sweden)

C.Bettina Rümmelein

2016-09-01

Full Text Available Permanent makeup (PMU is a frequently implemented cosmetic procedure performed by beauticians. From a technical point, PMU is considered a facial tattoo. Failed procedures or a change of mind can lead to the desire for removal. The purpose of this retrospective evaluation of patients who came to the clinic with the desire to remove PMU between 2011 and 2015 was to explore the problems, side effects, and results in order to define treatment guidelines for other doctors. We evaluated 87 individual cases in total. In treatable cases, i.e. 52 out of the 87 cases, laser treatments were performed using a nanosecond Q-switched neodymium-doped yttrium aluminium garnet (Nd:YAG laser. It takes between 1-12 treatments to remove the PMU. In three cases, the colour of the PMU could not be removed by laser and remained after the treatment. In two cases, laser treatment had to be terminated due to colour changes towards the green-blue spectrum. Before PMU removal, laser test shots are urgently recommended as unforeseeable colour changes can cause severe aesthetically unpleasant results. Covered up PMU (skin colour is particularly susceptible to changes in colour. Heat-induced shrinking of the eye area can cause an ectropium. Surgical solutions also have to be taken into consideration. The use of proper eye protection with intraocular eye shields is mandatory. This article is an attempt to set up some guidelines for the treatment of PMU removal.

Removal of silver nanoparticles by coagulation processes

International Nuclear Information System (INIS)

Sun, Qian; Li, Yan; Tang, Ting; Yuan, Zhihua; Yu, Chang-Ping

2013-01-01

Highlights: • This study investigated the removal of AgNP suspensions by four regular coagulants. • The optimal removal efficiencies for the four coagulants were achieved at pH 7.5. • The removal efficiency of AgNPs was affected by the natural water characteristics. • TEM and XRD showed that AgNPs or silver-containing NPs were adsorbed onto the flocs. -- Abstract: Commercial use of silver nanoparticles (AgNPs) will lead to a potential route for human exposure via potable water. Coagulation followed by sedimentation, as a conventional technique in the drinking water treatment facilities, may become an important barrier to prevent human from AgNP exposures. This study investigated the removal of AgNP suspensions by four regular coagulants. In the aluminum sulfate and ferric chloride coagulation systems, the water parameters slightly affected the AgNP removal. However, in the poly aluminum chloride and polyferric sulfate coagulation systems, the optimal removal efficiencies were achieved at pH 7.5, while higher or lower of pH could reduce the AgNP removal. Besides, the increasing natural organic matter (NOM) would reduce the AgNP removal, while Ca 2+ and suspended solids concentrations would also affect the AgNP removal. In addition, results from the transmission electron microscopy and X-ray diffraction showed AgNPs or silver-containing nanoparticles were adsorbed onto the flocs. Finally, natural water samples were used to validate AgNP removal by coagulation. This study suggests that in the case of release of AgNPs into the source water, the traditional water treatment process, coagulation/sedimentation, can remove AgNPs and minimize the silver ion concentration under the well-optimized conditions

Technetium removal: preliminary flowsheet options

International Nuclear Information System (INIS)

Eager, K.M.

1995-01-01

This document presents the results of a preliminary investigation into options for preliminary flowsheets for 99Tc removal from Hanford Site tank waste. A model is created to show the path of 99Tc through pretreatment to disposal. The Tank Waste Remediation (TWRS) flowsheet (Orme 1995) is used as a baseline. Ranges of important inputs to the model are developed, such as 99Tc inventory in the tanks and important splits through the TWRS flowsheet. Several technetium removal options are discussed along with sensitivities of the removal schemes to important model parameters

[Subjetivity and interconsultation in front of the new pathologies and technologies].

Science.gov (United States)

Finquelevich, Gabriel; Gabay, Pablo Miguel

2002-01-01

The technological advance in medicine was accompanied paradoxically of a lack of consideration toward the human being subjective dimension. This resulted in the appearance of new and unexpected inconveniences, caused by the patient's attitudes that cannot be understood neither solved by the specialist doctors, hindering the application of important achieved advantages. This development is particularly remarkable in the most spectacular innovations (transplantation and reimplantation of organs, protesis, electronic ortesis, hormonal substitutions, chemotherapy, etc.) that can mean the difference between life and death. There are human and subjective motivations behind all these problems that have not been kept in mind although constitute the specific sphere of work and investigation of the medical-psychological interconsultation.

Surgical aspects of removal of Essure microinsert.

Science.gov (United States)

Albright, Catherine M; Frishman, Gary N; Bhagavath, Bala

2013-09-01

Essure is designed as a hysteroscopically placed permanent birth control. Removal of the Essure microinsert can be a technically challenging procedure. Requests for removal are uncommon but do occur. Although hysteroscopic and laparoscopic removal has been reported, there is limited information available describing appropriate surgical technique. There have been six patients requesting Essure removal at our institution (one approximately 2 years after placement). Based on this experience, we have developed specific counseling points and surgical principles for laparoscopic removal: avoid injection of a hemostatic solution into the fallopian tube; avoid excessive traction on the coils; avoid cauterization of the outer coil; follow the Essure coil into the interstitial end of the fallopian tube to ensure complete removal of the insert; perform a salpingectomy rather than a salpingostomy. By taking into account these principles, key preoperative counseling points can be discussed, and laparoscopic Essure removal years after placement can be accomplished in a safe and deliberate fashion. Copyright © 2013 Elsevier Inc. All rights reserved.

Drenagem anômala parcial de quatro veias pulmonares com septo interatrial íntegro: relato de um caso raro Partial anomalous return of four pulmonary veins with intact interatrial septum defect: a rare case report

Directory of Open Access Journals (Sweden)

Edmar Atik

2008-07-01

Full Text Available É relatado caso raro de drenagem anômala parcial de quatro veias pulmonares no átrio direito e veia cava superior, com septo interatrial íntegro em criança de cinco anos de idade. Havia poucos sintomas, em contraste com débito ventricular esquerdo dependente do fluxo da veia lobar superior esquerda e da língula. Complacência diminuída à esquerda motivou quadro acentuado de hipertensão venocapilar pulmonar no pós-operatório imediato, aliviado por feitura de comunicação interatrial de 8 mm. A evolução posterior foi boa.We report on the rare case of partial anomalous return of four pulmonary veins in the right atrium and superior vena cava with intact interatrial septum in a five-year-old child. There were few symptoms in contrast with the left ventricular output dependent on the flow of the left upper lobe vein and from the lingula. Reduced compliance to the left led to a severe picture of pulmonary venocapillary hypertension in the immediate postoperative period, mitigated by an 8-mm interatrial septal defect. The patient progressed well after the intervention.

Removal of micropollutants during tertiary wastewater treatment by biofiltration: Role of nitrifiers and removal mechanisms.

Science.gov (United States)

Rattier, M; Reungoat, J; Keller, J; Gernjak, W

2014-05-01

The objective of this study was to determine the extent to which a suite of organic micropollutants (MPs) can be removed by biological filtration and the role of bioavailability and ammonia oxidizing microorganisms (AOMs) in the biodegradation process. During approximately one year, laboratory-scale columns with 8 min empty bed contact time (EBCT) and packed with anthracite as filter media were used for treating a tertiary effluent spiked with a broad range of MPs at a target concentration of 2 μg L(-1). In parallel columns, aerobic biomass growth was inhibited by using either the biocide sodium azide (500 mg L(-1) NaN3) or allylthiourea (5 mg L(-1) ATU), specifically inhibiting nitrifying bacteria. Once the biomass had colonized the media, around 15% of the dissolved organic carbon (DOC) contained in the untreated tertiary effluent was removed by non-inhibited columns. The removal of several MPs increased over time indicating the relevance of biological activity for the removal of MPs, while the negative control, the NaN3 inhibited column, showed no significant removal. Out of 33 MPs, 19 were recalcitrant (granular activated carbon (GAC) and their removal efficiency by biodegradation on anthracite was observed. This result suggested that the affinity of the MPs for GAC media could be a useful indicator of the bioavailability of compounds during biofiltration on anthracite. Copyright © 2014 Elsevier Ltd. All rights reserved.

Spleen removal

Science.gov (United States)

... spleen. Sickle cell anemia . Splenic artery aneurysm (rare). Trauma to the spleen. Risks Risks for anesthesia and surgery in general ... removal - series References Brandow AM, Camitta BM. Hyposplenism, splenic trauma, and splenectomy. In: Kliegman RM, Stanton BF, St. ...

Nitrogen removal from coal gasification wastewater by activated carbon technologies combined with short-cut nitrogen removal process.

Science.gov (United States)

Zhao, Qian; Han, Hongjun; Hou, Baolin; Zhuang, Haifeng; Jia, Shengyong; Fang, Fang

2014-11-01

A system combining granular activated carbon and powdered activated carbon technologies along with shortcut biological nitrogen removal (GAC-PACT-SBNR) was developed to enhance total nitrogen (TN) removal for anaerobically treated coal gasification wastewater with less need for external carbon resources. The TN removal efficiency in SBNR was significantly improved by introducing the effluent from the GAC process into SBNR during the anoxic stage, with removal percentage increasing from 43.8%-49.6% to 68.8%-75.8%. However, the TN removal rate decreased with the progressive deterioration of GAC adsorption. After adding activated sludge to the GAC compartment, the granular carbon had a longer service-life and the demand for external carbon resources became lower. Eventually, the TN removal rate in SBNR was almost constant at approx. 43.3%, as compared to approx. 20.0% before seeding with sludge. In addition, the production of some alkalinity during the denitrification resulted in a net savings in alkalinity requirements for the nitrification reaction and refractory chemical oxygen demand (COD) degradation by autotrophic bacteria in SBNR under oxic conditions. PACT showed excellent resilience to increasing organic loadings. The microbial community analysis revealed that the PACT had a greater variety of bacterial taxons and the dominant species associated with the three compartments were in good agreement with the removal of typical pollutants. The study demonstrated that pre-adsorption by the GAC-sludge process could be a technically and economically feasible method to enhance TN removal in coal gasification wastewater (CGW). Copyright © 2014. Published by Elsevier B.V.

Caracterização de rizóbios indicados para produção de inoculantes por meio de sequenciamento parcial do 16S rRNA Characterization of rhizobia indicated for inoculant production using 16S rRNA partial sequencing

Directory of Open Access Journals (Sweden)

Bethânia Figueiredo Barbosa de Toledo

2009-04-01

Full Text Available O objetivo deste trabalho foi confrontar as sequências parciais do gene 16S rRNA de estirpes padrão de rizóbios com as de estirpes recomendadas para a produção de inoculantes no Brasil, com vistas à verificação da confiabilidade do sequenciamento parcial desse gene para a identificação rápida de estirpes. Foram realizados sequenciamentos através de reação em cadeia da polimerase (PCR com iniciadores relativos à região codificadora do gene 16S rRNA entre as bactérias estudadas. Os resultados foram analisados pela consulta de similaridade de nucleotídeos aos do "Basic Local Alignment Search Tool" (Blastn e por meio da interpretação de árvores filogenéticas geradas usando ferramentas de bioinformática. A classificação taxonômica das estirpes Semia recomendadas para inoculação de leguminosas com base em propriedades morfológicas e especificidade hospedeira não foi confirmada em todas as estirpes. A maioria das estirpes estudadas, consultadas no Blastn, é consistente com a classificação proposta pela construção de árvores filogenéticas das sequências destas estirpes, com base na similaridade pelo sequenciamento parcial do gene considerado.The aim of this work was to compare the partial sequences of 16S rRNA gene of rhizobia strain patterns already classified with strains recommended for the production of inoculants in Brazil, in order to verify the reliability of partial sequencing of the gene for the purpose of rapid identification of strains. Polymerase Chain Reaction (PCR sequencing using primers on the coding region of the 16S rRNA gene among the bacteria studied was conducted. The results were analyzed by consulting the nucleotides' similarity based on Basic Local Alignment Search Tool (Blastn and by interpreting the phylogenetic trees generated by bioinformatic tools. The taxonomic classification of Semia strains recommended for legume inoculation based on morphological properties and host specificity was

Biological removal of iron and manganese in rapid sand filters - Process understanding of iron and manganese removal

DEFF Research Database (Denmark)

Lin, Katie

to precipitation and corrosion. Manganese and iron can either be removed physico-chemically or biologically or combined. The physico-chemical oxidation and precipitation of manganese can theoretically be achieved by aeration, but this process is slow unless pH is raised far above neutral, making the removal...... of manganese by simple aeration and precipitation under normal drinking water treatment conditions insignificant. Manganese may also be oxidized autocatalytically. Iron is usually easier to remove. First, iron is rapidly chemically oxidized by oxygen at neutral pH followed by precipitation and filtration......-filter, where iron is removed. Step 2: Filtration in an after-filter where e.g. ammonium and manganese is removed. The treatment relies on microbial processes and may present an alternative, greener and more sustainable approach for drinking water production spending less chemicals and energy than chemical (e...

Face mask removal is safer than helmet removal for emergent airway access in American football.

Science.gov (United States)

Swartz, Erik E; Mihalik, Jason P; Beltz, Nora M; Day, Molly A; Decoster, Laura C

2014-06-01

In cases of possible cervical spine injury, medical professionals must be prepared to achieve rapid airway access while concurrently restricting cervical spine motion. Face mask removal (FMR), rather than helmet removal (HR), is recommended to achieve this. However, no studies have been reported that compare FMR directly with HR. The purpose of this study was to compare motion, time, and perceived difficulty in two commonly used American football helmets between FMR and HR techniques, and when helmet air bladders were deflated before HR compared with inflated scenarios. The study incorporated a repeated measures design and was performed in a controlled laboratory setting. Participants included 22 certified athletic trainers (15 men and seven women; mean age, 33.9±10.5 years; mean experience, 11.4±10.0 years; mean height, 172±9.4 cm; mean mass, 76.7±14.9 kg). All participants were free from upper extremity or central nervous system pathology for 6 months and provided informed consent. Dependent variables included head excursion in degrees (computed by subtracting the minimum position from the maximum position) in each of the three planes (sagittal, frontal, transverse), time to complete the required task, and ratings of perceived exertion. To address our study purposes, we used two-by-two repeated-measures analysis of variance (removal technique×helmet type, helmet type×deflation status) for each dependent variable. Independent variables consisted of removal technique (FMR and HR), helmet type (Riddell Revolution IQ [RIQ] and VSR4), and helmet deflation status (deflated [D], inflated, [I]). After familiarization, participants conducted two successful trials for each of six conditions in random order (RIQ-FMR, VSR4-FMR, RIQ-HR-D, VSR4-HR-D, RIQ-HR-I, and VSR4-HR-I). Face masks, helmets, and shoulder pads were removed from a live model wearing a properly fitted helmet and shoulder pads. The participant and an investigator stabilized the model's head. A six

Resinas acetálicas: diversas aplicaciones en odontoestomatología

OpenAIRE

Puigpelat Martí, Ana M.; Casanellas Bassols, Josep M. (Josep Maria)

1994-01-01

La resina acetálica o Polioxime­tileno (POM) es un nuevo material estético de reciente aplicación en el campo de la Odontoestomatolo­gía. En este artículo presentamos al­gunas de las aplicaciones donde la estética desempeña una función importante. Una de las aplicaciones de las re­sinas acetálicas es el campo de la Prótesis Parcial Removible, cuan­do queremos sustituir los retene­dores vestibulares convencionales (metálicos) por retenedores más es­téticos. Otra posible aplicación puede ser la...

Complications of syndesmotic screw removal

NARCIS (Netherlands)

T. Schepers (Tim); E.M.M. van Lieshout (Esther); M.R. de Vries (Mark); M. van der Elst (Maarten)

2011-01-01

textabstractBackground: Currently, the metallic syndesmotic screw is the gold standard in the treatment of syndesmotic disruption. Whether or not this screw needs to be removed remains debatable. The aim of the current study was to determine the complications which occur following routine removal of

How Effective are Existing Arsenic Removal Techniques

Science.gov (United States)

This presentation will summarize the system performance results of the technologies demonstrated in the arsenic demonstration program. The technologies include adsorptive media, iron removal, iron removal with iron additions, iron removal followed by adsorptive media, coagulatio...

Technetium removal from aqueous wastes

International Nuclear Information System (INIS)

Fletcher, P.A.; Jones, C.P.; Junkison, A.R.; Turner, A.D.; Kavanagh, P.R.

1992-03-01

The research discussed in this report has compared several ''state of the art'' techniques for the removal of traces of the radionuclide, technetium, from aqueous wastes. The techniques investigated were: electrochemical reduction to an insoluble oxide, electrochemical ion exchange, seeded ultrafiltration and chemical reduction followed by filtration. Each technique was examined using a simulant based upon the waste generated by the Enhanced Actinide Removal Plant (EARP) at Sellafield. The technique selected for further investigation was direct electrochemical reduction which offers an ideal route for the removal of technetium from the stream (DFs 10-100) and can be operated continuously with a low power consumption 25 kW for the waste generated by EARP. Cell designs for scale up have been suggested to treat the 1000m 3 of waste produced every day. Future work is proposed to investigate the simultaneous removal of other key radionuclides, such as ruthenium, plutonium and cobalt as well as scale up of the resulting process and to investigate the effect of these other radionuclides on the efficiency of the electrochemical reduction technique for the removal of technetium. Total development and full scale plant costs are estimated to be of the order of 5 pounds - 10M, with a time scale of 5 -8 years to realisation. (author)

Glioma supratentorial de baixo grau em adulto: experiência com 23 pacientes operados Supratentorial low grade tumors in adults: an experience with 23 surgical cases

Directory of Open Access Journals (Sweden)

José Carlos Lynch

2004-06-01

Full Text Available Os astrocitomas e oligodendrogliomas supratentoriais dos adultos são tumores infrequentes. Analisamos retrospectivamente 23 pacientes com este tipo de neoplasia que foram operados entre 1986 e 2002. Não ocorreu nenhum óbito no pós-operatório. A sobrevida de 5 e 10 anos de todo o grupo foi 67 e 30% respectivamente, semelhante a outras experiências. Em 14 pacientes obtivemos a remoção completa da lesão (60,8% e em 9 (39,2% ocorreu remoção parcial do tumor. No subgrupo da ressecção total do tumor, 89% sobreviveram 5 anos e 45% alcançaram 10 anos de sobrevida, em contraste com o subgrupo da remoção parcial em que somente 35% alcançaram os 5 anos de sobrevida e nenhum, 10 anos. Devido aos efeitos deletérios da radioterapia, nós preferimos prescrevê-la apenas nos casos de recorrência tumoral.Low-grade supratentorial astrocytomas and oligodendrogliomas in adults are uncommon tumors of the central nervous system. We analyzed retrospectively 23 patients with this type of neoplasia, who were operated on between 1986 and 2002. There were no post-operative deaths. The survival rate at 5 and 10 years post-surgery for the entire sample was 67 and 30% respectively, similar to other outcomes. With 14 patients we achieved a complete removal of the lesion (60.8% and with 9 (39.2% partial removal of the tumor. In the sub-group which underwent total resection of the tumor, 89% survived 5 years and 45% attained 10 years of survival, in contrast with the sub-group that underwent partial removal in which only 35% attained 5 years of survival and none 10 years. Due to the deleterious effects of radiation therapy, we preferred to prescribe it only in cases of tumor recurrence.

The behaviour, fate and removal of pharmaceuticals in biological nutrient removal sewage treatment

OpenAIRE

Popple, Tina

2013-01-01

Pharmaceuticals that are intended for human use are frequently detected in the aquatic environment. This is predominantly from the excretion of pharmaceuticals by patients, in their urine and faeces, which subsequently enter sewage treatment plants. Sewage treatment provides a final opportunity for pharmaceutical removal, prior to discharge into the environment, however, removal is often incomplete. Once in the environment, pharmaceuticals have the potential to cause effects on aquatic organi...

Complications of syndesmotic screw removal

NARCIS (Netherlands)

Schepers, Tim; van Lieshout, Esther M. M.; de Vries, Mark R.; van der Elst, Maarten

2011-01-01

Currently, the metallic syndesmotic screw is the gold standard in the treatment of syndesmotic disruption. Whether or not this screw needs to be removed remains debatable. The aim of the current study was to determine the complications which occur following routine removal of the syndesmotic screw

Arsenic removal by lime softening

DEFF Research Database (Denmark)

Kaosol, T.; Suksaroj, C.; Bregnhøj, Henrik

2002-01-01

This paper focuses on the study of arsenic removal for drinking water by lime softening. The initial arsenic (V) concentration was 500 and 1,000 ug/L in synthetic groundwater. The experiments were performed as batch tests with varying lime dosages and mixing time. For the synthetic groundwater......, arsenic (V) removal increased with increasing lime dosage and mixing time, as well as with the resulting pH. The residual arsenic (V) in all cases was lower than the WHO guideline of 10 ug/L at pH higher than 11.5. Kinetic of arsenic (V) removal can be described by a first-order equation as C1 = C0*e......^-k*t. The relation between the constant (k value) and increasing lime dosage was found to be linear, described by k = 0.0034 (Dlime). The results support a theory from the literature that the arsenic (V) was removed by precipitation af Ca3(AsO4)2. The results obtained in the present study suggest that lime...

Membrane adsorber for endotoxin removal

Directory of Open Access Journals (Sweden)

Karina Moita de Almeida

Full Text Available ABSTRACT The surface of flat-sheet nylon membranes was modified using bisoxirane as the spacer and polyvinyl alcohol as the coating polymer. The amino acid histidine was explored as a ligand for endotoxins, aiming at its application for endotoxin removal from aqueous solutions. Characterization of the membrane adsorber, analysis of the depyrogenation procedures and the evaluation of endotoxin removal efficiency in static mode are discussed. Ligand density of the membranes was around 7 mg/g dry membrane, allowing removal of up to 65% of the endotoxins. The performance of the membrane adsorber prepared using nylon coated with polyvinyl alcohol and containing histidine as the ligand proved superior to other membrane adsorbers reported in the literature. The lack of endotoxin adsorption on nylon membranes without histidine confirmed that endotoxin removal was due to the presence of the ligand at the membrane surface. Modified membranes were highly stable, exhibiting a lifespan of approximately thirty months.

Treino locomotor com suporte parcial de peso corporal na reabilitação da lesão medular: revisão da literatura

Directory of Open Access Journals (Sweden)

Cristina Maria Rocha Dutra

Full Text Available INTRODUÇÃO: O treino locomotor com suporte de peso corporal (TLSP é utilizado há aproximadamente 20 anos no campo da reabilitação em pacientes que sofrem de patologias neurológicas. O TLSP favorece melhoras osteomusculares, cardiovasculares e psicológicas, pois desenvolve ao máximo o potencial residual do organismo, proporcionando a reintegração na convivência familiar, profissional e social. OBJETIVO: Identificar as principais modalidades de TLSP e seus parâmetros de avaliação com a finalidade de contribuir com o estabelecimento de evidências confiáveis para as práticas reabilitativas de pessoas com lesão medular. MATERIAIS E MÉTODOS: Foram analisados artigos originais, publicados entre 2000 e 2011, que envolvessem treino de marcha após a lesão medular, com ou sem suporte parcial de peso corporal, e tecnologias na assistência do treino, como biofeedback e estimulação elétrica funcional, entre outras. RESULTADOS: A maioria dos participantes dos estudos era do sexo masculino; os níveis de lesão variavam de C3 a L3; ASIA teve pontuações de A a D; os tempos de lesão variaram entre 0,3 meses a 33 anos. Também se verificou que não há consenso em relação ao protocolo de TLSP. CONCLUSÃO: O treino locomotor com suporte de peso corporal mostra-se viável na reabilitação de pacientes que sofrem de uma patologia neurológica como a lesão medular. Independentemente do protocolo de treino utilizado, os benefícios referentes ao aumento da força muscular, manutenção ou aumento da densidade óssea, diminuição da frequência cardíaca e aumento do condicionamento físico estão presentes

Prótesis parcial removible. Una variación de la galga utilizada en su diseño

OpenAIRE

Samsó Manzanedo, Jorge; Salsench Cabré, Juan; Gascón Mayordomo, Francisco; Peraire Ardèvol, Maria; Nogueras Clemente, Joaquin

1991-01-01

En este artículo se describe una modificación de la galga del paralelizador, de forma que permita la medición de la altura del área de deslizamiento de los brazos retenedores sobre las piezas para, de esta forma, poder conseguir la misma altura en el área de deslizamiento del brazo recíproco, evitando así los movimientos de vaivén de las piezas pilares durante la inserción y remoción.

Removing intranasal splints after septal surgery.

Science.gov (United States)

Aksoy, Elif; Serin, Gediz Murat; Polat, Senol; Kaytaz, Asm

2011-05-01

The aim of this retrospective chart review of the patients who had septal surgery with or without turbinate surgery was to compare the postoperative complication rates according to the time of intranasal-splint (INS) removal. The data of 137 patients who underwent septal surgery with or without turbinate surgery at 2 different hospitals of Acıbadem Health Care Group between January 2007 and March 2009 were retrospectively evaluated. The patients who had these risk factors were eliminated, and 96 patients were included in this study. The patients were divided into 2 groups according to splint-removal time. The first group comprises patients whose nasal splints were removed in 24 hours after surgery, and the second group comprises patients whose splints were removed 5 days after the surgery. Any bleeding, septal hematoma, and synechia after pack removal were recorded. Analysis of the rate of complications was done with the χ test. Sixty-five male and 31 female patients with a mean age of 32.4 years (range, 18-57 years) were included in the study groups. Septal surgeries were performed in association with turbinate surgery in all 96 patients. These patients were divided into 2 groups. In the first group (n = 50), INSs were removed in 24 hours after surgery. In the second group (n = 46), INSs were removed 5 days after surgery. Bleeding within the first postoperative week was not recorded in both groups. Late bleeding was recorded in 2% (n = 1) of group 1 and in 2.17% (n = 1) in group 2. Septal hematoma and synechia were not recorded in none of the groups. The results were not statistically significant (P = 1). The routine use of INSs after septoplasty and removing them 24 hours after septoplasty are sufficient to avoid postoperative complications, and it minimizes postoperative discomfort.

[Removable partial dentures. Oral functions and types

NARCIS (Netherlands)

Creugers, N.H.J.; Baat, C. de

2009-01-01

A removable partial denture enables the restoration or improvement of 4 oral functions: aesthetics, mandibular stability, mastication, and speech. However, wearing a removable partial denture should not cause oral comfort to deteriorate. There are 3 types of removable partial dentures: acrylic

Efectos del género y la educación en la felicidad en adultos argentinos

Directory of Open Access Journals (Sweden)

Sofía Esmeralda Auné

2017-12-01

Full Text Available La felicidad se conceptualiza como una emoción positiva centrada en el presente, muy deseable pero difícil de conseguir. Para estimarla se aplicó la versión argentina de la Escala de Felicidad de Lima de Alarcón (2006 compuesta de tres dimensiones: Sentido de la Vida Perspectiva Externa (SVPE, Sentido de la Vida Perspectiva Interna (SVPI y Satisfacción con la Vida (SCV. Se seleccionaron tres muestras independientes de 200 individuos cada una (50% mujeres considerando diferentes niveles educativos -desde secundario completo hasta universitario completo-. Se realizó un análisis de la varianza (ANOVA de dos vías en cada dimensión considerando como factores fijos el género y el nivel educativo. En las tres dimensiones la interacción entre tener un mayor nivel educativo y ser del género femenino favoreció en forma significativa los mayores puntajes de felicidad (SVPE, F = 4.14, p = .02, η2 parcial = .014; SVPI, F=2.34,p=.09,η2 parcial=.008;SCV,F=3.34,p=.04, η2 parcial = .011. En SVPE y SVPI un mayor nivel educativo por sí mismo tuvo como efecto puntajes de felicidad más altos (SVPE, F = 4.12, p = .02, η2 parcial = .014; SVPI, F = 4.24, p = .02; η2 parcial = .014, mientras que en SCV fue pertenecer al género femenino el factor que aumentó en forma significativa los niveles de felicidad (F = 3.03, p = .08, η2 parcial = .005.

Study on diverse passive decay heat removal approach

International Nuclear Information System (INIS)

Lin Qian; Si Shengyi

2012-01-01

One of the most important principles for nuclear safety is the decay heat removal in accidents. Passive decay heat removal systems are extremely helpful to enhance the safety. In currently design of many advanced nuclear reactors, kinds of passive systems are proposed or developed, such as the passive residual heat removal system, passive injection system, passive containment cooling system. These systems provide entire passive heat removal paths from core to ultimate heat sink. Various kinds of passive systems for decay heat removal are summarized; their common features or differences on heat removal paths and design principle are analyzed. It is found that, these passive decay heat removal paths are similarly common on and connected by several basic heat transfer modes and steps. By the combinations or connections of basic modes and steps, new passive decay heat removal approach or diverse system can be proposed. (authors)

Organic micropollutant removal during river bank filtration

NARCIS (Netherlands)

Bertelkamp, C.

2015-01-01

This study investigated the factors influencing the main removal mechanisms (adsorption and biodegradation) for organic micropollutant (OMP) removal during river bank filtration (RBF) and the possibility of developing a predictive model of this process for OMP removal during RBF. Chapter 2 analysed

Removal and factors influencing removal of sulfonamides and trimethoprim from domestic sewage in constructed wetlands.

Science.gov (United States)

Dan A; Yang, Yang; Dai, Yu-Nv; Chen, Chun-Xing; Wang, Su-Yu; Tao, Ran

2013-10-01

Twelve pilot-scale constructed wetlands with different configurations were set up in the field to evaluate the removal and factors that influence removal of sulfonamides (sulfadiazine, sulfapyridine, sulfacetamide, sulfamethazine and sulfamethoxazole) and trimethoprim from domestic sewage. The treatments included four flow types, three substrates, two plants and three hydraulic loading rates across two seasons (summer and winter). Most target antibiotics were efficiently removed by specific constructed wetlands; in particular, all types of constructed wetlands performed well for the degradation of sulfapyridine. Flow types were the most important influencing factor in this study, and the best removal of sulfonamides was achieved in vertical subsurface-flow constructed wetlands; however, the opposite phenomenon was found with trimethoprim. Significant relationships were observed between antibiotic degradation and higher temperature and redox potential, which indicated that microbiological pathways were the most probable degradation route for sulfonamides and trimethoprim in constructed wetlands. Copyright © 2013 Elsevier Ltd. All rights reserved.

Test Plan for the overburden removal demonstration

International Nuclear Information System (INIS)

Rice, P.; Thompson, D.; Winberg, M.; Skaggs, J.

1993-06-01

The removal of soil overburdens from contaminated pits and trenches involves using equipment that will remove a small layer of soil from 3 to 6 in. at any time. As a layer of soil is removed, overburden characterization techniques perform surveys to a depth that exceeds each overburden removal layer to ensure that the removed soil will be free of contamination. It is generally expected that no contamination will be found in the soil overburden, which was brought in after the waste was put in place. It is anticipated that some containers in the waste zone have lost their integrity, and the waste leakage from those containers has migrated by gravity downward into the waste zone. To maintain a safe work environment, this method of overburden removal should allow safe preparation of a pit or trench for final remediation. To demonstrate the soil overburden techniques, the Buried Waste Integrated Demonstration Program has contracted vendor services to provide equipment and techniques demonstrating soil overburden removal technology. The demonstration will include tests that will evaluate equipment performance and techniques for removal of overburden soil, control of contamination spread, and dust control. To evaluate the performance of these techniques, air particulate samples, physical measurements of the excavation soil cuts, maneuverability measurements, and time versus volume (rate) of soil removal data will be collected during removal operations. To provide a medium for sample evaluation, the overburden will be spiked at specific locations and depths with rare earth tracers. This test plan will be describe the objectives of the demonstration, data quality objectives, methods to be used to operate the equipment and use the techniques in the test area, and methods to be used in collecting data during the demonstration

[Acrylic resin removable partial dentures

NARCIS (Netherlands)

Baat, C. de; Witter, D.J.; Creugers, N.H.J.

2011-01-01

An acrylic resin removable partial denture is distinguished from other types of removable partial dentures by an all-acrylic resin base which is, in principle, solely supported by the edentulous regions of the tooth arch and in the maxilla also by the hard palate. When compared to the other types of

Nueva indicación de implantes cigomáticos para la rehabilitación fija de desdentados parciales: reporte de un caso A new indication for Zygomatic implants for the fixed rehabilitation of the partially edentulous patient: Case report

Directory of Open Access Journals (Sweden)

M.F. Pintor Willcock

2007-08-01

Full Text Available Los implantes cigomáticos están indicados en casos de reabsorciones maxilares severas. Esto permitiría eliminar la necesidad de injertos óseos o levantamientos de seno de manera de recuperar el volumen óseo necesario para rehabilitar en base a implantes convencionales, disminuyendo así la morbilidad y el tiempo de tratamiento. A continuación presentamos caso de paciente desdentado parcial superior, clase I de Kennedy, en el cual se utilizaron dos implantes cigomáticos a cada lado, emergiendo sobre el reborde, a través de una modificación de la técnica.Zygomatic Implants are used in the rehabilitation of severely resorbed maxillas. This eliminates the necessity of bone grafting or sinus augmentation to restore the osseous volume necessary for conventional implant rehabilitation. This also minimizes morbidity and treatment times. We present the case of a patient with a partially edentulous upper ridge, Kennedy class I, in whom two zygomatic implants were placed in each side, that emerged over the alveolar ridge crest as a result of a technique modification.

TMI-2 reactor-vessel head removal and damaged-core-removal planning

International Nuclear Information System (INIS)

Logan, J.A.; Hultman, C.W.; Lewis, T.J.

1982-01-01

A major milestone in the cleanup and recovery effort at TMI-2 will be the removal of the reactor vessel closure head, planum, and damaged core fuel material. The data collected during these operations will provide the nuclear power industry with valuable information on the effects of high-temperature-dissociated coolant on fuel cladding, fuel materials, fuel support structural materials, neutron absorber material, and other materials used in reactor structural support components and drive mechanisms. In addition, examination of these materials will also be used to determine accident time-temperature histories in various regions of the core. Procedures for removing the reactor vessel head and reactor core are presented

PRTR ion exchange vault water removal

International Nuclear Information System (INIS)

Ham, J.E.

1995-11-01

This report documents the removal of radiologically contaminated water from the Plutonium Recycle Test Reactor (PRTR) ion exchange vault. Approximately 57,000 liters (15,000 gallons) of water had accumulated in the vault due to the absence of a rain cover. The water was removed and the vault inspected for signs of leakage. No evidence of leakage was found. The removal and disposal of the radiologically contaminated water decreased the risk of environmental contamination

Electro-coagulation-flotation process for algae removal

International Nuclear Information System (INIS)

Gao Shanshan; Yang Jixian; Tian Jiayu; Ma Fang; Tu Gang; Du Maoan

2010-01-01

Algae in surface water have been a long-term issue all over the world, due to their adverse influence on drinking water treatment process as well as drinking water quality. The algae removal by electro-coagulation-flotation (ECF) technology was investigated in this paper. The results indicated that aluminum was an excellent electrode material for algae removal as compared with iron. The optimal parameters determined were: current density = 1 mA/cm 2 , pH = 4-7, water temperature = 18-36 deg. C, algae density = 0.55 x 10 9 -1.55 x 10 9 cells/L. Under the optimal conditions, 100% of algae removal was achieved with the energy consumption as low as 0.4 kWh/m 3 . The ECF performed well in acid and neutral conditions. At low initial pH of 4-7, the cell density of algae was effectively removed in the ECF, mainly through the charge neutralization mechanism; while the algae removal worsened when the pH increased (7-10), and the main mechanism shifted to sweeping flocculation and enmeshment. The mechanisms for algae removal at different pH were also confirmed by atomic force microscopy (AFM) analysis. Furthermore, initial cell density and water temperature could also influence the algae removal. Overall, the results indicated that the ECF technology was effective for algae removal, from both the technical and economical points of view.

Removal of boron (B) from waste liquors.

Science.gov (United States)

Jiang, J Q; Xu, Y; Simon, J; Quill, K; Shettle, K

2006-01-01

This paper explores the use of electrocoagulation to remove boron from waste effluent in comparison with alum coagulation. In treating model test wastes, greater boron removals were achieved with electrocoagulation at low doses than conventional alum coagulation when reaction was undertaken for the same conditions (pH 8.5, and initial boron concentration was 500 mg/L). Al electrocoagulation can achieve good boron removal performance (68.3%) at a dose of 2.1 (as molar ratio of Al:B, and for current density of 62.1 A/m2), while alum coagulation can only achieve the maximum boron removal of 56% at a dose of 2.4. Also, Al electrocoagulation can remove 15-20% more boron than alum coagulation for the same dose compared in the treatment of both model test wastes and industry effluent. The estimation of running costs shows that to achieve 75% boron removal from industry waste effluent, i.e. removing 150 g of boron from 1 m3 of effluent, electrocoagulation was 6.2 times cheaper than alum coagulation. The economic advantage of electrocoagulation in the treatment of boron-containing waste effluent is thus significant.

Avaliação do desempenho dos reagentes do tempo de tromboplastina parcial ativada utilizados para detectar o anticoagulante lúpico Assessment of the performance of reagents of activated partial thromboplastin time used to detect the lupus anticoagulant

Directory of Open Access Journals (Sweden)

Fernanda Chiuso

2005-06-01

Full Text Available INTRODUÇÃO: O anticoagulante lúpico é uma imunoglobulina pertencente à família dos anticorpos antifosfolípides. A sua ação in vitro é interferir nos testes de coagulação dependentes de fosfolípides. O tempo de tromboplastina parcial ativada (TTPA é um teste utilizado como screening na pesquisa do anticoagulante lúpico. Os reagentes utilizados neste teste apresentam grandes variações quanto à sensibilidade. OBJETIVO: Avaliar o desempenho dos reagentes do TTPA e detectar a presença do anticoagulante lúpico através de diferentes testes da coagulação. MATERIAL E MÉTODO: A pesquisa do anticoagulante lúpico foi realizada em 50 amostras plasmáticas de pacientes do sexo feminino através dos testes do TTPA, do tempo de coagulação do caulim (TCC, do tempo de tromboplastina parcial ativada diluída (TTPAd e do tempo do veneno da víbora de Russel diluído (TVVRd. Três cefalinas comerciais foram avaliadas pelos testes do TTPA e do TTPAd. Na comparação entre os reagentes estudados foi aplicado o cálculo do intervalo de confiança (95%. RESULTADOS: Os três reagentes avaliados apresentaram boa concordância e os métodos utilizados responderam bem à pesquisa do anticoagulante lúpico. DISCUSSÃO E CONCLUSÃO: As três cefalinas comerciais avaliadas podem ser utilizadas na rotina laboratorial para a pesquisa do anticoagulante lúpico.INTRODUCTION: The lupus anticoagulant is an immunoglobin which belongs to the antiphospholid antibodies family. Its in vitro function is to interfere with coagulation tests that are dependent on phospholipids. The activated partial thromboplastin time (APTT is a test used as screening on lupus anticoagulant research. Reagents used in this test demonstrate wide sensitivity ranges. OBJECTIVE: To assess the performance of APTT reagents and detect the presence of lupus anticoagulant through various coagulation tests. MATERIAL AND METHOD: The lupus anticoagulant research was performed in plasma from 50

Assessment of the removal of estrogenicity in biological nutrient removal wastewater treatment processes

International Nuclear Information System (INIS)

Ogunlaja, O.O.; Parker, W.J.

2015-01-01

The removal of estrogenicity in a University of Cape Town-biological nutrient removal (UCT-BNR) wastewater treatment process was investigated using pilot and bench scale systems, batch experiments and mathematical modeling. In the pilot BNR process, 96 ± 5% of the estrogenicity exerted by the influent wastewater was removed by the treatment process. The degradation efficiencies in the anaerobic, anoxic and aerobic zones of the pilot BNR bioreactor were 11 ± 9%, 18 ± 2% and 93 ± 10%, respectively. In order to further understand the performance of the BNR process in the removal of estrogenicity from wastewater, a bench scale BNR process was operated with synthetic wastewater dosed with E1 and E2. The removal of estrogenicity in the bench scale system (95 ± 5%) was comparable to the pilot BNR process and the degradation efficiencies were estimated to be 8 ± 0.8%, 38 ± 4% and 85 ± 22% in the anaerobic, anoxic and aerobic zones, respectively. A biotransformation model developed to predict the fate of E1 and E2 in batch tests using the sludge from the BNR process was calibrated using the data from the experiments. The biotransformation rate constants for the transformation of E2 to E1 were estimated as 71 ± 1.5, 31 ± 3.3 and 1 ± 0.9 L g COD −1 d −1 for the aerobic, anoxic and anaerobic batch tests, respectively, while the corresponding biotransformation rate constants for the transformation of E1 were estimated to be 7.3 ± 1.0, 3 ± 2.0, and 0.85 ± 0.6 L·g COD −1 d −1 . A steady state mass balance model formulated to describe the interactions between E2 and E1 in BNR activated sludge reasonably described the fate of E1 and E2 in the BNR process. - Highlights: • Comparable estrogenicity removal was observed from two BNR processes. • Pseudo first order model described the transformation of E2 and E1 in BNR process. • Biotransformation of E1 in BNR activated sludge controls the degradation of E2

Assessment of the removal of estrogenicity in biological nutrient removal wastewater treatment processes

Energy Technology Data Exchange (ETDEWEB)

Ogunlaja, O.O., E-mail: oogunlaj@uwaterloo.ca; Parker, W.J., E-mail: wjparker@uwaterloo.ca

2015-05-01

The removal of estrogenicity in a University of Cape Town-biological nutrient removal (UCT-BNR) wastewater treatment process was investigated using pilot and bench scale systems, batch experiments and mathematical modeling. In the pilot BNR process, 96 ± 5% of the estrogenicity exerted by the influent wastewater was removed by the treatment process. The degradation efficiencies in the anaerobic, anoxic and aerobic zones of the pilot BNR bioreactor were 11 ± 9%, 18 ± 2% and 93 ± 10%, respectively. In order to further understand the performance of the BNR process in the removal of estrogenicity from wastewater, a bench scale BNR process was operated with synthetic wastewater dosed with E1 and E2. The removal of estrogenicity in the bench scale system (95 ± 5%) was comparable to the pilot BNR process and the degradation efficiencies were estimated to be 8 ± 0.8%, 38 ± 4% and 85 ± 22% in the anaerobic, anoxic and aerobic zones, respectively. A biotransformation model developed to predict the fate of E1 and E2 in batch tests using the sludge from the BNR process was calibrated using the data from the experiments. The biotransformation rate constants for the transformation of E2 to E1 were estimated as 71 ± 1.5, 31 ± 3.3 and 1 ± 0.9 L g COD{sup −1} d{sup −1} for the aerobic, anoxic and anaerobic batch tests, respectively, while the corresponding biotransformation rate constants for the transformation of E1 were estimated to be 7.3 ± 1.0, 3 ± 2.0, and 0.85 ± 0.6 L·g COD{sup −1} d{sup −1}. A steady state mass balance model formulated to describe the interactions between E2 and E1 in BNR activated sludge reasonably described the fate of E1 and E2 in the BNR process. - Highlights: • Comparable estrogenicity removal was observed from two BNR processes. • Pseudo first order model described the transformation of E2 and E1 in BNR process. • Biotransformation of E1 in BNR activated sludge controls the degradation of E2.

[Removable partial dentures. Oral functions and types].

Science.gov (United States)

Creugers, N H J; de Baat, C

2009-11-01

A removable partial denture enables the restoration or improvement of 4 oral functions: aesthetics, mandibular stability, mastication, and speech. However, wearing a removable partial denture should not cause oral comfort to deteriorate. There are 3 types of removable partial dentures: acrylic tissue-supported dentures, dentures with cast metal frameworks en dentures with cast metal frameworks and (semi)precision attachments. Interrupted tooth arches,free-ending tooth arches, and a combination of interrupted as well as free-ending tooth arches can be restored using these dentures. Well-known disadvantages of removable partial dentures are problematic oral hygiene, negative influence on the remaining dentition and limited oral comfort. Due to the advanced possibilities of fixed tooth- or implant-supported partial dentures, whether or not free-ending, or tooth- as well as implant-supported partial dentures, the indication of removable partial dentures is restricted. Nevertheless, for the time being the demand for removable partial dentures is expected to continue.

Spent Nuclear Fuel (SNF) Removal Campaign Plan

International Nuclear Information System (INIS)

PAJUNEN, A.L.

2000-01-01

The overall operation of the Spent Nuclear Fuel Project will include fuel removal, sludge removal, debris removal, and deactivation transition activities. Figure 1-1 provides an overview of the current baseline operating schedule for project sub-systems, indicating that a majority of fuel removal activities are performed over an approximately three-and-one-half year time period. The purpose of this document is to describe the strategy for operating the fuel removal process systems. The campaign plan scope includes: (1) identifying a fuel selection sequence during fuel removal activities, (2) identifying MCOs that are subjected to extra testing (process validation) and monitoring, and (3) discussion of initial MCO loading and monitoring in the Canister Storage Building (CSB). The campaign plan is intended to integrate fuel selection requirements for handling special groups of fuel within the basin (e.g., single pass reactor fuel), process validation activities identified for process systems, and monitoring activities during storage

Spray removal of fission products in PWR containments

International Nuclear Information System (INIS)

Grist, D.R.

1982-11-01

Models and parameters for assessing the rate and extent of removal of various fission product species are described. A range of droplet sizes and of spray additive options is considered and removal of vapour phase inorganic iodine species, of organic iodides and of aerosols containing fission products is discussed. Aerosol removal is assessed in terms of contributing removal mechanisms and the removal rate modelled as a function of the radius of the aerosol particulate species. (author)

Residual Heat Removal System qualitative probabilistic safety analysis before and after auto closure interlock removal

International Nuclear Information System (INIS)

Mikulicic, V.; Simic, Z.

1992-01-01

The analysis evaluates the consequences of the removal of the auto closure interlock (ACI) on the Residual Heat Removal System (RHRS) suction/isolation valves at the nuclear power plant. The deletion of the RHRS ACI is in part based on a probabilistic safety analysis (PSA) which justifies the removal based on a criterion of increased availability and reliability. Three different areas to be examined in PSA: the likelihood of an interfacing system LOCA; RHRS availability and reliability; and low temperature overpressurization control. The paper emphasizes particularly the RHRS unavailability and reliability evaluation utilizing the current control circuitry configuration and then with the proposed modification to the control circuitry. (author)

Lateralização das funções musicais na epilepsia parcial Asymmetry of musical functions in partial epilepsy

Directory of Open Access Journals (Sweden)

CLÉO MONTEIRO FRANÇA CORREIA

1998-12-01

Full Text Available Foram avaliados 14 pacientes destros com idade mediana de 30 anos, portadores de epilepsia parcial (Grupo Epiléptico e divididos em dois Grupos (Direito e Esquerdo, segundo a lateralização da atividade paroxística no eletrencefalograma interictal. Dos 14 pacientes, 42,8% (6/14 dos casos apresentaram foco à direita, enquanto os 57,2% (8/14 restantes apresentaram foco à esquerda. O Grupo Controle foi formado por 31 indivíduos destros com idade mediana de 30 anos e sem história de doença neurológica ou antecedente de crises epilépticas. Os indivíduos estudados, sem conhecimento musical, realizaram Testes de Habilidades Musicais que envolveram Ritmo Espontâneo, Percepção dos Parâmetros Musicais (timbre, duração, altura, intensidade e ritmo e Testes Gnósico-Práxicos (reconhecimento e reprodução de parâmetros musicais e organização e reprodução de movimentos corporais rítmicos. Concluímos que a presença do foco no hemisfério cerebral direito afeta o desempenho de funções de reconhecimento melódico, enquanto que nos casos com foco no hemisfério cerebral esquerdo, a reprodução e organização rítmicas estão mais comprometidas quando comparados ao Grupo Controle.Fourteen right handed patients with partial epilepsy (Epileptic Group and with a median age of 31 years were divided into two groups (Right and Left, according the laterality of paroxystic activity in the eletroencaphalogram. Of the 14 patients, 42.8% (6/14 presented a focus at the right side while the others 57.2% (8/14 presented a focus at the left. The Control Group consisted of 31 right handed individuals with a median age of 30 years and with no previous history of neurological disease or epileptic seizures. All the individuals had no musical skills. They carried out Music Abilities Tests including Spontaneous Rhythm, Elemental Music Functions Perception (tone color, duration, pitch, intensity and rhythm and Complex Strutures Tests (recognition and

Autotrophic nitrogen removal process in a potable water treatment biofilter that simultaneously removes Mn and NH4(+)-N.

Science.gov (United States)

Cai, Yan'an; Li, Dong; Liang, Yuhai; Zeng, Huiping; Zhang, Jie

2014-11-01

Ammonia (NH4(+)-N) removal pathways were investigated in a potable water treatment biofilter that simultaneously removes manganese (Mn) and NH4(+)-N. The results indicated a significant loss of nitrogen in the biofilter. Both the completely autotrophic nitrogen removal over nitrite (CANON) process and nitrification were more likely to contribute to NH4(+)-N removal. Moreover, the model calculation results demonstrated that the CANON process contributed significantly to the removal of NH4(+)-N. For influent NH4(+)-N levels of 1.030 and 1.749mg/L, the CANON process contribution was about 48.5% and 46.6%, respectively. The most important finding was that anaerobic ammonia oxidation (ANAMMOX) bacteria were detectable in the biofilter. It is interesting that the CANON process was effective even for such low NH4(+)-N concentrations. Copyright © 2014 Elsevier Ltd. All rights reserved.

Tritium Removal from Carbon Plasma Facing Components

International Nuclear Information System (INIS)

Skinner, C.H.; Coad, J.P.; Federici, G.

2003-01-01

Tritium removal is a major unsolved development task for next-step devices with carbon plasma-facing components. The 2-3 order of magnitude increase in duty cycle and associated tritium accumulation rate in a next-step tokamak will place unprecedented demands on tritium removal technology. The associated technical risk can be mitigated only if suitable removal techniques are demonstrated on tokamaks before the construction of a next-step device. This article reviews the history of codeposition, the tritium experience of TFTR (Tokamak Fusion Test Reactor) and JET (Joint European Torus) and the tritium removal rate required to support ITER's planned operational schedule. The merits and shortcomings of various tritium removal techniques are discussed with particular emphasis on oxidation and laser surface heating

Sulphate Removal from Water by Carbon Residue from Biomass Gasification: Effect of Chemical Modification Methods on Sulphate Removal Efficiency

Directory of Open Access Journals (Sweden)

Hanna Runtti

2016-02-01

Full Text Available Sulphate removal from mine water is a problem because traditional chemical precipitation does not remove all sulphates. In addition, it creates lime sediment as a secondary waste. Therefore, an inexpensive and environmental-friendly sulphate removal method is needed in addition to precipitation. In this study, carbon residues from a wood gasification process were repurposed as precursors to a suitable sorbent for SO42- ion removal. The raw material was modified using ZnCl2, BaCl2, CaCl2, FeCl3, or FeCl2. Carbon residues modified with FeCl3 were selected for further consideration because the removal efficiency toward sulphate was the highest. Batch sorption experiments were performed to evaluate the effects of the initial pH, initial SO42- ion concentration, and contact time on sulphate removal. The removal of SO42- ions using Fe-modified carbon residue was notably higher compared with unmodified carbon residue and commercially available activated carbon. The sorption data exhibited pseudo-second-order kinetics. The isotherm analysis indicated that the sorption data of Fe-modified carbon residues can be represented by the bi-Langmuir isotherm model.

Tattoo removal with ingenol mebutate

Directory of Open Access Journals (Sweden)

Cozzi SJ

2017-05-01

Full Text Available Sarah-Jane Cozzi,1 Thuy T Le,1 Steven M Ogbourne,2 Cini James,1 Andreas Suhrbier1 1Inflammation Biology Laboratory, QIMR Berghofer Medical Research Institute, Brisbane, 2Genecology Research Center, Faculty of Science, Health, Engineering and Education, University of the Sunshine Coast, Maroochydore DC, QLD, Australia Abstract: An increasing number of people are getting tattoos; however, many regret the decision and seek their removal. Lasers are currently the most commonly used method for tattoo removal; however, treatment can be lengthy, costly, and sometimes ineffective, especially for certain colors. Ingenol mebutate is a licensed topical treatment for actinic keratoses. Here, we demonstrate that two applications of 0.1% ingenol mebutate can efficiently and consistently remove 2-week-old tattoos from SKH/hr hairless mice. Treatment was associated with relocation of tattoo microspheres from the dermis into the posttreatment eschar. The skin lesion resolved about 20 days after treatment initiation, with some cicatrix formation evident. The implications for using ingenol mebutate for tattoo removal in humans are discussed. Keywords: tattoo, ingenol mebutate, mouse 

Which trees should be removed in thinning?

Directory of Open Access Journals (Sweden)

Timo Pukkala

2015-12-01

Full Text Available Background: In economically optimal management, trees that are removed in a thinning treatment should be selected on the basis of their value, relative value increment and the effect of removal on the growth of remaining trees. Large valuable trees with decreased value increment should be removed, especially when they overtop smaller trees. Methods: This study optimized the tree selection rule in the thinning treatments of continuous cover management when the aim is to maximize the profitability of forest management. The weights of three criteria (stem value, relative value increment and effect of removal on the competition of remaining trees were optimized together with thinning intervals. Results and conclusions: The results confirmed the hypothesis that optimal thinning involves removing predominantly large trees. Increasing stumpage value, decreasing relative value increment, and increasing competitive influence increased the likelihood that removal is optimal decision. However, if the spatial distribution of trees is irregular, it is optimal to leave large trees in sparse places and remove somewhat smaller trees from dense places. However, the benefit of optimal thinning, as compared to diameter limit cutting is not usually large in pure one-species stands. On the contrary, removing the smallest trees from the stand may lead to significant (30–40 % reductions in the net present value of harvest incomes. Keywords: Continuous cover forestry, Tree selection, High thinning, Optimal management, Spatial distribution, Spatial growth model

Nuclear reactor auxiliary heat removal system

International Nuclear Information System (INIS)

Thompson, R.E.; Pierce, B.L.

1977-01-01

An auxiliary heat removal system to remove residual heat from gas-cooled nuclear reactors is described. The reactor coolant is expanded through a turbine, cooled in a heat exchanger and compressed by a compressor before reentering the reactor coolant. The turbine powers both the compressor and the pump which pumps a second fluid through the heat exchanger to cool the reactor coolant. A pneumatic starter is utilized to start the turbine, thereby making the auxiliary heat removal system independent of external power sources

Iron removal using an aerated granular filter

Energy Technology Data Exchange (ETDEWEB)

Cho, B.Y. [Dongguk University, Seoul (Republic of Korea). College of Engineering

2005-10-01

Laboratory scale experiments concerning iron removal from artificial raw water by an artificial filter using anthracite as filter media were conducted. The major findings were that iron oxidation and removal by an aerated filter is mainly a catalytic chemical reaction rather than a biological reaction. Further, iron removal does not perform effectively without aeration. Iron removal was very effective when the pH was weakly acidity. Iron oxide attached to the surface of the media is identified as ferrihydrite, which catalyzes the oxidation of iron as shown by Moessbauer spectra analysis.

Laparoscopic Removal of Gossypiboma

Directory of Open Access Journals (Sweden)

Zeki Özsoy

2015-01-01

Full Text Available Gossypiboma is defined as a mass caused by foreign body reaction developed around the retained surgical item in the operative area. When diagnosed, it should be removed in symptomatic patients. Minimal invasive surgery should be planned for the removal of the retained item. The number of cases treated by laparoscopic approach is rare in the literature. We present a case of forty-year-old woman referred to emergency room with acute abdomen diagnosed as gossypiboma and treated successfully with laparoscopic surgery.

Electrokinetic removal of salt from brick masonry

DEFF Research Database (Denmark)

Ottosen, Lisbeth M.; Pedersen, Anne Juul; Rörig-Dalgaard, Inge

2006-01-01

A method to effectively remove salts from masonry is lacking. The present study aims at determining the removal efficiency of salts from bricks in an applied low current electric DC field. At first an investigation on removal of NaCl and Na(NO3)2 from spiked bricks in laboratory scale was conducted...

Raquianestesia contínua em paciente submetido à gastrectomia parcial: relato de caso Raquianestesia continua en paciente sometido a la gastrectomía parcial: relato de caso Continuous spinal block in a patient undergoing partial gastrectomy: case report

Directory of Open Access Journals (Sweden)

Patrícia Falcão Pitombo

2009-08-01

Full Text Available JUSTIFICATIVA E OBJETIVOS: Devido à alta incidência de complicações técnicas e neurológicas, a raquianestesia contínua foi abandonada por muitos anos. Com o surgimento dos cateteres intermediários, a técnica vem ressurgindo e ganhando simpatia no arsenal anestesiológico. O objetivo deste relato foi resgatar a utilidade da técnica como alternativa viável para procedimento de médio a grande porte. RELATO DO CASO: Paciente feminina, 58 anos, 62 kg, estado físico ASA I, com relato de enxaqueca, lombalgia e procedimentos cirúrgicos prévios sob raquianestesia sem intercorrências. Candidata à laparotomia exploradora por provável tumor pélvico. Após venóclise com cateter 18G, monitorização com cardioscópio, pressão arterial-não invasiva e oximetria de pulso, foi sedada com midazolam 2 mg e fentanil 100 ¼g e colocada em decúbito lateral esquerdo. Foi submetida à raquianestesia contínua por via mediana em L3-L4. Foram injetados 9 mg de bupivacaína hiperbárica a 0,5% e 120 ¼g de sulfato de morfina. Após inspeção da cavidade, verificou-se que o tumor era proveniente do estroma gástrico, sendo necessária ampliação da incisão e realização de gastrectomia parcial. Todo o procedimento foi realizado com pequena dose de solução hiperbárica e completa estabilidade hemodinâmica. Não houve necessidade de UTI no pós-operatório e a paciente evoluiu sem queixas e com alto grau de satisfação. Recebeu alta hospitalar após 72 horas sem nenhuma intercorrência. CONCLUSÕES: Os cateteres intermediários utilizados em raquianestesia contínua mostram-se promissores em tornar a técnica bastante atraente e de grande utilidade em operações de médio a grande porte, podendo inclusive ser alternativa eficaz no manuseio de pacientes em estado crítico, em que grandes repercussões hemodinâmicas podem ser deletérias.JUSTIFICATIVA Y OBJETIVOS: A causa de la elevada incidencia de las complicaciones técnicas y neurol

Removing Pubic Hair (For Young Men)

Science.gov (United States)

... who has experience with performing laser hair removal. Electrolysis: Electrolysis is the only hair removal method that permanently ... using slow strokes. Rinse your skin with warm water after you are done shaving and then pat ...

Ventriculectomia parcial esquerda: ponte para transplante em pacientes com insuficiência cardíaca refratária e hipertensão pulmonar

Directory of Open Access Journals (Sweden)

Fernando A. LUCCHESE

1997-07-01

Full Text Available A insuficiência cardíaca congestiva refratária a tratamento clínico tem no transplante cardíaco ortotópico a sua melhor opção cirúrgica. Escassez de doadores, morbidade significativa associada com a terapêutica anti-rejeição, aterosclerose coronária e custos consideráveis associados com o transplante são fatores responsáveis pela sua limitada aplicação. Para os que se encontram na lista para transplante, o período de espera de 6 meses a 1 ano pode levar à deterioração hemodinâmica e expressivo número de mortes. A sobrevida, na lista de espera, pode ser de 46% em 1 ano (1. Afora isso, um significativo número de pacientes tem contra-indicação para transplante, por apresentar hipertensão e resitência pulmonar elevadas. A ventriculectomia parcial esquerda (VPE (2, 3, restaurando o raio do ventrículo esquerdo e melhorando, assim, a relação massa-volume e o desempenho sistólico, pode propiciar diminuição da pressão e da resistência arterial pulmonar, em alguns pacientes.Medically refractory heart failure is traditionally managed with cardiac transplantation although some limited success has also been obtained in selected patients with alternative surgical options. Scarce donors, significant morbidity secondary to the antirejection therapy, post-transplantation coronary disease and the high costs of transplantation programs, all together are limiting factors. For those on the waiting list of transplantation the one year mortality may be as high as 46%. Furthermore, a significant number of patients have contraindication to transplantation due to severe pulmonary arterial hypertension and elevated pulmonary vascular resistance. Partial Left Ventriculectomy (PLV attempts to relieve symptoms of congestive heart failure by reducing left ventricular dimensions and mass and restoring the normal mass-to-volume ratio of the left ventricle. As a consequence, cardiac index and forward ejection fraction increase thus unloading

33 CFR 157.170 - COW equipment: Removal.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false COW equipment: Removal. 157.170... Crude Oil Washing (COW) System on Tank Vessels Cow Operations § 157.170 COW equipment: Removal. (a) Whenever a deck mounted COW machine is removed from the tank, the master shall ensure that: (1) The supply...

40 CFR 211.214 - Removal of label.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Removal of label. 211.214 Section 211... PRODUCT NOISE LABELING Hearing Protective Devices § 211.214 Removal of label. Section 10(a)(4) of the Act prohibits any person from removing, prior to sale, any label required by this subpart, by either physical...

Investigation of Removal Efficiency of Nano Sized Alumina for Removal of Acid Red 18 from Aqueous Solutions

Directory of Open Access Journals (Sweden)

M.H. Dehghani

2014-08-01

Full Text Available Background and Objectives: Acid Red 18 dye was one of the Azo colors that are used in textile and dyeing industries. These dyes are often toxic and carcinogenic to humans and the environment as pollution. This study was conducted with the aim of investigating on nano alumina efficiency for removal of Acid Red 18 dye from aqueous solutions. Materials and Methods: This study was carried out in the laboratory scales and effect of The initial concentration of dye (25 to 100 mg/l, pH solution (3, 7, 11, nano alumina concentration (0.1, 0.4, 1, 1.5 g/l and contact time in range 5 to 240 min on dye removal efficiency were evaluated. Also kinetic and isotherm models of adsorption process were evaluated. Results: The high removal efficiency was observed in pH=3, contact time=60 min and Adsorbent concentration of 0.4 g/L. The rate of color removal were 63/24, 50/84 and 20 percent respectively at pH of 3, 7 and 11 for the initial dye concentration of 25 mg/l and 0.4 g/l mass absorbent that showing with increasing pH removal efficiency is reduced. the studied dye absorption isotherm was fitted Langmuir model (R2=0.994 which was 83.33 mg/g for maximum adsorption. The results from kinetic studies showed that removal of the studied dye was best described by pseudo-second order kinetic model (r2=0.999. Conclusion: The present study shows nano alumina powder is promising adsorbent for removal of Acid Red 18 from aqueous solution.

Fluoroscopic removal of retrievable self-expandable metal stents in patients with malignant oesophageal strictures: Experience with a non-endoscopic removal system.

Science.gov (United States)

Kim, Pyeong Hwa; Song, Ho-Young; Park, Jung-Hoon; Zhou, Wei-Zhong; Na, Han Kyu; Cho, Young Chul; Jun, Eun Jung; Kim, Jun Ki; Kim, Guk Bae

2017-03-01

To evaluate clinical outcomes of fluoroscopic removal of retrievable self-expandable metal stents (SEMSs) for malignant oesophageal strictures, to compare clinical outcomes of three different removal techniques, and to identify predictive factors of successful removal by the standard technique (primary technical success). A total of 137 stents were removed from 128 patients with malignant oesophageal strictures. Primary overall technical success and removal-related complications were evaluated. Logistic regression models were constructed to identify predictive factors of primary technical success. Primary technical success rate was 78.8 % (108/137). Complications occurred in six (4.4 %) cases. Stent location in the upper oesophagus (P=0.004), stricture length over 8 cm (P=0.030), and proximal granulation tissue (Pstent location in the upper oesophagus, and stricture length over 8 cm were negative predictive factors for primary technical success by standard extraction and may require a modified removal technique. • Fluoroscopic retrievable SEMS removal is safe and effective. • Standard removal technique by traction is effective in the majority of patients. • Three negative predictive factors of primary technical success were identified. • Caution should be exercised during the removal in those situations. • Eversion technique is effective in cases of proximal granulation tissue.

Krypton-85 removal and storage

International Nuclear Information System (INIS)

Gutierrez Fernandez, J.

1978-01-01

A literature survey was made in order to predict the atmospheric Kr-85 concentration in the future and it s effect on the population. As a consequence the need for its treatment and removal as a previous step to gaseous waste disposal is justified. A literature review of possible methods of Kr-85 removal and storage is also included. (Author) 43 refs

Successful removable partial dentures.

Science.gov (United States)

Lynch, Christopher D

2012-03-01

Removable partial dentures (RPDs) remain a mainstay of prosthodontic care for partially dentate patients. Appropriately designed, they can restore masticatory efficiency, improve aesthetics and speech, and help secure overall oral health. However, challenges remain in providing such treatments, including maintaining adequate plaque control, achieving adequate retention, and facilitating patient tolerance. The aim of this paper is to review the successful provision of RPDs. Removable partial dentures are a successful form of treatment for replacing missing teeth, and can be successfully provided with appropriate design and fabrication concepts in mind.

Ventriculectomia parcial mediante oclusão do influxo venoso cardíaco em cães Partial ventriculectomy through cardiac inflow occlusion in dogs

Directory of Open Access Journals (Sweden)

Liége Georgia Andrioli Martins

2009-09-01

Full Text Available A redução na função sistólica do ventrículo esquerdo em cães com insuficiência cardíaca congestiva está relacionada ao aumento de volume do ventrículo. A despeito dos avanços no tratamento conservador, o prognóstico é desfavorável com alta taxa de mortalidade. Este trabalho propôs um protocolo cirúrgico da redução ventricular para tratamento de cardiomiopatia dilatada em cães, a ventriculectomia parcial. A intervenção cirúrgica foi realizada sem circulação extracorpórea, mediante oclusão do influxo sangüíneo ao coração. Avaliou-se a execução da técnica à curto prazo, por eletrocardiograma, radiografia simples de tórax e biópsia cardíaca. Os resultados mostraram-se favoráveis pela fácil execução da técnica. Os animais sobreviveram ao período de sessenta dias de observação apresentando alterações eletrocardiográficas transitórias, redução da silhueta ventricular e cicatrização miocárdica normal.The reduction of the systolic function in the left ventricle of dogs with congestive heart failure is related to increased ventricular volume. Despite of the advances in conservative treatments to dilated cardiomiopathy, the prognosis is guarded with a high mortality rate. This research aimed to evaluate a surgical protocol of cardiac chamber reduction (partial ventriculectomy to treat dilated cardiomiopathy in dogs, like the procedure realized in humans. The surgery was realized by mean inflow occlusion without cardiopulmonary by-pass. The dogs postoperative evolution of was evaluated in a short period by electrocardiogram, and simple thoracic radiography. Patients were observed for sixty days and during this period did´nt present hemodynamic alterations.

Cuantificación de polifenoles, flavonoides totales e isoflavonas en arepas elaboradas con adición parcial de harina desgrasada de soya (Glycine max

Directory of Open Access Journals (Sweden)

Petra Beatriz Navas H.

2013-12-01

Full Text Available La arepa aunque es un producto de consumo masivo en Venezuela, es un alimento con limitaciones desde el punto de vista nutricional. En este sentido, se evaluó el efecto de la incorporación de la harina que se obtiene como subproducto de la extracción mecánica del aceite de soya, sobre el enriquecimiento en componentes bioactivos (polifenoles y flavonoides de una harina de maíz empleada en la elaboración de arepas. Se hicieron arepas utilizando harina de maíz precocida (HMP comercial como control (100 % y mezclas con adición parcial de 7, 10 y 15 %, empleando harina de la torta residual desgrasada de soya (HTRDS. Se efectuaron las siguientes determinaciones analíticas a las harinas: humedad, grasa, almidón, y absorción de agua, asimismo se determinó proteína en las harinas, lisina disponible, polifenoles, flavonoides e isoflavonas (genisteína y daidzeína tanto a las harinas como a las arepas elaboradas, estas últimas fueron evaluadas sensorialmente por un grupo de 12 catadores previamente entrenados en Análisis Descriptivo Cuantitativo y constituido por personas que son consumidores frecuentes de este alimento. Los resultados mostraron que la HTRDS es una fuente importante de componentes bioactivos, con concentraciones de polifenoles y de flavonoides totales de 2079,7 μg ácido cafeico/g y de 1295,2 μg quercetina/g, respectivamente. La incorporación de 7 % de HTRDS produjo arepas con 130,0 μg ácido cafeico/g y 82,0 μg quercetina/g de polifenoles y flavonoides totales, respectivamente; y para las isoflavonas 103,0 μg/kg y 124,7 μg/kg de genisteína y daidzeína, respectivamente. La evaluación sensorial mostró que esta proporción de HTDRS fue la preferida en todos los atributos sensoriales, luego de la muestra control.

Is Hardware Removal Recommended after Ankle Fracture Repair?

Directory of Open Access Journals (Sweden)

Hong-Geun Jung

2016-01-01

Full Text Available The indications and clinical necessity for routine hardware removal after treating ankle or distal tibia fracture with open reduction and internal fixation are disputed even when hardware-related pain is insignificant. Thus, we determined the clinical effects of routine hardware removal irrespective of the degree of hardware-related pain, especially in the perspective of patients’ daily activities. This study was conducted on 80 consecutive cases (78 patients treated by surgery and hardware removal after bony union. There were 56 ankle and 24 distal tibia fractures. The hardware-related pain, ankle joint stiffness, discomfort on ambulation, and patient satisfaction were evaluated before and at least 6 months after hardware removal. Pain score before hardware removal was 3.4 (range 0 to 6 and decreased to 1.3 (range 0 to 6 after removal. 58 (72.5% patients experienced improved ankle stiffness and 65 (81.3% less discomfort while walking on uneven ground and 63 (80.8% patients were satisfied with hardware removal. These results suggest that routine hardware removal after ankle or distal tibia fracture could ameliorate hardware-related pain and improves daily activities and patient satisfaction even when the hardware-related pain is minimal.

IVO's nuclide removal system takes to the road

International Nuclear Information System (INIS)

Tusa, E.H.

1995-01-01

The successful and routine use of IVO's treatment system for the removal of cesium from the evaporator concentrates at the Loviisa WER plant in Finland is described. The system uses a granular inorganic hexacyanoferate-based ion exchanger to separate cesium from liquid radioactive wastes. The compactness of the original systems at Loviisa suggested the development of a transportable unit. A combined nuclide removal system was created which included a highly efficient ultrafiltration unit to separate nearly all particulate material carrying radionuclides, as well as the cesium removal capability. A 20ft long container carrying the removal package was completed in 1994. This NUclide REmoval System (NURES) was used for the first time in January 1995 to purify liquid waste accumulating at training reactors in Estonia and has performed well. As an extension of nuclide removal, a process has been created to recover boron from liquid wastes. A system for boron recovery and nuclide removal has been designed for use at the Paks plant in Hungary. The removal process has been shown to improve the safety of final waste disposal compared with the alternative treatment by cementation because the cesium is very tightly bound into the ion exchange material. (UK)

Endoscopic removal of malfunctioning biliary self-expandable metallic stents.

Science.gov (United States)

Familiari, Pietro; Bulajic, Milutin; Mutignani, Massimiliano; Lee, Linda S; Spera, Gianluca; Spada, Cristiano; Tringali, Andrea; Costamagna, Guido

2005-12-01

Endoscopic removal of malfunctioning self-expandable metallic biliary stents (SEMS) is difficult and not well described. The aim of this study is to review the indications, the techniques, and the results of SEMS removal in a cohort of patients with malfunctioning stents. All patients who underwent an attempt at endoscopic removal of biliary SEMS over a 5-year period were retrospectively identified. The main indications for SEMS removal were the following: distal migration of the stent or impaction to the duodenum, impaction into the bile-duct wall, tissue ingrowth, and inappropriate length of the stent causing occlusion of intrahepatic ducts. SEMS were removed by using foreign-body forceps or polypectomy snares. Endoscopic removal of 39 SEMS (13 uncovered and 26 covered) was attempted in 29 patients (17 men; mean age, 66 years). SEMS extraction was attempted after a mean of 7.5 months (8.75 months standard deviation) post-SEMS insertion. Removal was successful in 20 patients (68.9%) and in 29 SEMS (74.3%). Covered SEMS were effectively removed more frequently than uncovered ones: 24 of 26 (92.3%) and 5 of 13 (38.4%), respectively (p < 0.05). No major complications were recorded. Multivariate analysis showed that the time interval between insertion and removal, SEMS length, stent-mesh design (zigzag vs. interlaced), and indication for removal were not predictive of success at stent removal. Endoscopic removal of biliary SEMS is feasible and safe in more than 70% of cases. Because only 38% of uncovered SEMS were removable, the presence of a stent covering is the only factor predictive of successful stent extraction. The presence of diffuse and severe ingrowth was the main feature limiting SEMS removal.

Electrical discharge machining for vessel sample removal

International Nuclear Information System (INIS)

Litka, T.J.

1993-01-01

Due to aging-related problems or essential metallurgy information (plant-life extension or decommissioning) of nuclear plants, sample removal from vessels may be required as part of an examination. Vessel or cladding samples with cracks may be removed to determine the cause of cracking. Vessel weld samples may be removed to determine the weld metallurgy. In all cases, an engineering analysis must be done prior to sample removal to determine the vessel's integrity upon sample removal. Electrical discharge machining (EDM) is being used for in-vessel nuclear power plant vessel sampling. Machining operations in reactor coolant system (RCS) components must be accomplished while collecting machining chips that could cause damage if they become part of the flow stream. The debris from EDM is a fine talclike particulate (no chips), which can be collected by flushing and filtration

ARSENIC REMOVAL FROM DRINKING WATER BY IRON REMOVAL. USEPA DEMONSTRATION PROJECT AT CLIMAX, MN. PROJECT SUMMARY

Science.gov (United States)

This document is an eight page summary of the final report on arsenic demonstration project at Climax, MN (EPA/600/R-06/152). The objectives of the project are to evaluate the effectiveness of the Kinetico iron removal system in removing arsenic to meet the new arsenic maximum co...

Arsenic removal from industrial effluent through electrocoagulation

Energy Technology Data Exchange (ETDEWEB)

Balasubramanian, N. [Central Electrochemical Research Inst., Karaikudi (India). Dept. of Pollution Control; Madhavan, K. [Coimbatore Inst. of Technology, Coimbatore (India). Dept. of Chemistry

2001-05-01

In the present investigation, it is attempted to remove arsenic from smelter industrial wastewater through electro-coagulation. Experiments covering a wide range of operating conditions for removal of the arsenic present in the smelter wastewater are carried out in a batch electrochemical reactor. It has been observed from the present work that arsenic can be removed effectively through electrocoagulation. (orig.)

In-line coagulation prior to UF of treated domestic wastewater - foulants removal, fouling control and phosphorus removal

KAUST Repository

Zheng, Xing; Plume, Stephan; Ernst, Mathias; Croue, Jean-Philippe; Jekel, Martin R.

2012-01-01

The present work investigated fouling control and phosphorus removal by applying in-line coagulation prior to ultrafiltration (UF) of treated domestic wastewater. Experiments were conducted in both lab- and pilot-scale under close to neutral pH condition. Lab-scale foulant removal tests showed that increasing the dosage of FeCl3, AlCl3 and polymeric aluminum chloride (PACl) can improve biopolymer removal. Specifically, PACl reduced preferentially the proteinaceous fraction of biopolymer while the other two coagulants showed no significant preference. The filterability of water samples was improved after coagulation, which is contributed to biopolymer removal and the formation of larger particles. Pilot UF experiments demonstrated that in-line coagulation improved the performance of UF to a large extent. Within 0.037-0.148mmol Me3+/L dosage range, adding more FeCl3 and AlCl3 slowed down the development of trans-membrane pressure (TMP) correspondingly, while changing PACl dosage showed little effect on the variation of TMP increase rate. Further investigations indicated that PACl related precipitates contributed to more irreversible fouling than that which the monomeric coagulants made. Fouling control is thus considered as a co-effect determined by foulant removal efficiency, fouling layer structure and the adherence of hydrolysis products/precipitates onto the membrane. With respect to phosphorus removal, dosing FeCl3 and AlCl3 achieved higher removal efficiency than using PACl. Based on lab- and pilot-scale results, dosing FeCl3 and AlCl3 at a relative dosage of over 2.5mol Me3+ per mol total phosphorus (TP) in feedwater is necessarily required to keep the TP concentration under 50μg/L in UF permeate. © 2012 Elsevier B.V.

In-line coagulation prior to UF of treated domestic wastewater - foulants removal, fouling control and phosphorus removal

KAUST Repository

Zheng, Xing

2012-06-01

The present work investigated fouling control and phosphorus removal by applying in-line coagulation prior to ultrafiltration (UF) of treated domestic wastewater. Experiments were conducted in both lab- and pilot-scale under close to neutral pH condition. Lab-scale foulant removal tests showed that increasing the dosage of FeCl3, AlCl3 and polymeric aluminum chloride (PACl) can improve biopolymer removal. Specifically, PACl reduced preferentially the proteinaceous fraction of biopolymer while the other two coagulants showed no significant preference. The filterability of water samples was improved after coagulation, which is contributed to biopolymer removal and the formation of larger particles. Pilot UF experiments demonstrated that in-line coagulation improved the performance of UF to a large extent. Within 0.037-0.148mmol Me3+/L dosage range, adding more FeCl3 and AlCl3 slowed down the development of trans-membrane pressure (TMP) correspondingly, while changing PACl dosage showed little effect on the variation of TMP increase rate. Further investigations indicated that PACl related precipitates contributed to more irreversible fouling than that which the monomeric coagulants made. Fouling control is thus considered as a co-effect determined by foulant removal efficiency, fouling layer structure and the adherence of hydrolysis products/precipitates onto the membrane. With respect to phosphorus removal, dosing FeCl3 and AlCl3 achieved higher removal efficiency than using PACl. Based on lab- and pilot-scale results, dosing FeCl3 and AlCl3 at a relative dosage of over 2.5mol Me3+ per mol total phosphorus (TP) in feedwater is necessarily required to keep the TP concentration under 50μg/L in UF permeate. © 2012 Elsevier B.V.

Method removing radioactivity from kaolin

International Nuclear Information System (INIS)

Conley, R.F.

1978-01-01

A method of reducing the radioactivity found in naturally occurring kaolins to about 40% below its native value, and the leachable radiogenic components to less than 20% is described. This reduction is achieved by removing from the kaolin particles of a size less than 0.5 microns. This removal may be carried out by gravitational settling, flocculation of non-colloidal particles, or acid leaching

Distúrbios craniomandibulares em pacientes edentados unilaterais inferiores com e sem próteses parciais removíveis (PPR: um estudo transversal utilizando o índice craniomandibular Craniomandibular disorders in unilateral lower free end dental arch subjects with and without removable partial dentures (RPD: a cross sectional study using the craniomandibular index (CMI

Directory of Open Access Journals (Sweden)

Carlos GIL

1998-04-01

Full Text Available No presente trabalho, foi feito um estudo clínico em 102 pacientes, 78 mulheres e 24 homens, com idade variando entre 18 e 61 anos, com a finalidade de analisar comparativamente a severidade de sinais e sintomas das desordens craniomandibulares (DCM. Procedeu-se a anamnese, o exame clínico e as moldagens e estabeleceu-se um método de escores, através do qual se avaliou o grau de severidade das DCM. Os pacientes foram divididos em três grupos de 34 pessoas, assim constituídos: a portadores de prótese parcial removível corretiva para arcos com ausência unilateral de dentes inferiores (classe II de Kennedy; b edentados unilaterais inferiores, sem tratamento protético (ausência unilateral de dentes naturais ou artificiais; e c pacientes com todos os elementos dentais. Todos os indivíduos estudados apresentavam alguma queixa de dor facial ou desconforto muscular. Foram analisados e comparados estatisticamente todos os dados, e concluiu-se que o grau de severidade dos sinais e sintomas das DCM, refletido pelos diversos escores obtidos, mostrou comportamento diferente nos grupos de pacientes estudados. Os edentados unilaterais não portadores de PPR, com ausência de dentes por período superior a cinco anos, foram os que apresentaram maior grau de severidade dos sinais e sintomas das DCM. Os resultados ainda nos permitiram sugerir que o emprego de uma PPR corretamente planejada poderá diminuir significativamente o grau de severidade dos sinais e sintomas das DCM, em pacientes edentados unilaterais mandibulares, correspondentes à classe II de Kennedy. A utilização do índice craniomandibular (ICM permitiu avaliar com segurança sinais e sintomas dos distúrbios craniomandibulares.In this study a survey of 102 patients, 78 female and 24 male, aged between 18 and 61 years, was carried out in order to evaluate the severity of signs and symptoms of craniomandibular disorder (CMD. In each case, the degree of severity of the CMD was recorded

Superfund TIO videos. Set A. Identifying PRPS. Removal process: Removal site evaluation. Part 2. Audio-Visual

International Nuclear Information System (INIS)

1990-01-01

The videotape is divided into three sections. Section 1 details the liability of Potentially Responsible Parties (PRPs) and describes the four classes of PRPs: current owners and operators, former owners and operators, generators, and transporters (if they selected the site). Section 2 lists the goals of the Potentially Responsible Party (PRP) search and explains how to identify key players during the PRP search. How to plan and conduct the PRP search is also outlined. Section 3 outlines the steps involved in conducting a removal site evaluation. A discussion of when to conduct a removal preliminary assessment, a removal site inspection, and an Engineering Evaluation/Cost Analysis (EE/AC) also is covered

Peach Bottom HTGR decommissioning and component removal

International Nuclear Information System (INIS)

Kohler, E.J.; Steward, K.P.; Iacono, J.V.

1977-07-01

The prime objective of the Peach Bottom End-of-Life Program was to validate specific HTGR design codes and predictions by comparison of actual and predicted physics, thermal, fission product, and materials behavior in Peach Bottom. Three consecutive phases of the program provide input to the HTGR design methods verifications: (1) Nondestructive fuel and circuit gamma scanning; (2) removal of steam generator and primary circuit components; and (3) Laboratory examinations of removed components. Component removal site work commenced with establishment of restricted access areas and installation of controlled atmosphere tents to retain relative humidity at <30%. A mock-up room was established to test and develop the tooling and to train operators under simulated working conditions. Primary circuit ducting samples were removed by trepanning, and steam generator access was achieved by a combination of arc gouging and grinding. Tubing samples were removed using internal cutters and external grinding. Throughout the component removal phase, strict health physics, safety, and quality assurance programs were implemented. A total of 148 samples of primary circuit ducting and steam generator tubing were removed with no significant health physics or safety incidents. Additionally, component removal served to provide access fordetermination of cesium plateout distribution by gamma scanning inside the ducts and for macroexamination of the steam generator from both the water and helium sides. Evaluations are continuing and indicate excellent performance of the steam generator and other materials, together with close correlation of observed and predicted fission product plateout distributions. It is concluded that such a program of end-of-life research, when appropriately coordinated with decommissioning activities, can significantly advance nuclear plant and fuel technology development

Boron removal from geothermal waters by electrocoagulation

Energy Technology Data Exchange (ETDEWEB)

Yilmaz, A. Erdem [Atatuerk University, Faculty of Engineering, Department of Environmental Engineering., 25240 Erzurum (Turkey)], E-mail: aerdemy@atauni.edu.tr; Boncukcuoglu, Recep [Atatuerk University, Faculty of Engineering, Department of Environmental Engineering., 25240 Erzurum (Turkey); Kocakerim, M. Muhtar [Atatuerk University, Faculty of Engineering, Department of Chemical Engineering, 25240 Erzurum (Turkey); Yilmaz, M. Tolga; Paluluoglu, Cihan [Atatuerk University, Faculty of Engineering, Department of Environmental Engineering., 25240 Erzurum (Turkey)

2008-05-01

Most of the geothermal waters in Turkey contain extremely high concentration of boron when they are used for irrigation. The use of geothermal waters for irrigation can results in excess amount deposition of boron in soil. On the other hand, a minimal boron concentration is required for irrigational waters. In this study, electrocoagulation (EC) was selected as a treatment process for the removal of boron from thermal waters obtained from Ilica-Erzurum in Turkey. Current density (CD), pH of solution and temperature of solution were selected as operational parameters. The results showed that boron removal efficiency increased from pH 4.0 to 8.0 and decreased at pH 10.0. Although boron removal efficiency was highest at pH 8.0, energy consumption was very high at this pH value compared to other pH intervals. Boron removal efficiency reached to 95% with increasing current density from 1.5 to 6.0 mA/cm{sup 2}, but energy consumption was also increased in this interval. At higher temperatures of solution, such as 313 and 333 K, boron removal efficiency increased. At optimum conditions, boron removal efficiency in geothermal water reached up to 95%.

Boron removal from geothermal waters by electrocoagulation

International Nuclear Information System (INIS)

Yilmaz, A. Erdem; Boncukcuoglu, Recep; Kocakerim, M. Muhtar; Yilmaz, M. Tolga; Paluluoglu, Cihan

2008-01-01

Most of the geothermal waters in Turkey contain extremely high concentration of boron when they are used for irrigation. The use of geothermal waters for irrigation can results in excess amount deposition of boron in soil. On the other hand, a minimal boron concentration is required for irrigational waters. In this study, electrocoagulation (EC) was selected as a treatment process for the removal of boron from thermal waters obtained from Ilica-Erzurum in Turkey. Current density (CD), pH of solution and temperature of solution were selected as operational parameters. The results showed that boron removal efficiency increased from pH 4.0 to 8.0 and decreased at pH 10.0. Although boron removal efficiency was highest at pH 8.0, energy consumption was very high at this pH value compared to other pH intervals. Boron removal efficiency reached to 95% with increasing current density from 1.5 to 6.0 mA/cm 2 , but energy consumption was also increased in this interval. At higher temperatures of solution, such as 313 and 333 K, boron removal efficiency increased. At optimum conditions, boron removal efficiency in geothermal water reached up to 95%

Position paper -- Waste storage tank heat removal

International Nuclear Information System (INIS)

Stine, M.D.

1995-01-01

The purpose of this paper is to develop and document a position on the heat removal system to be used on the waste storage tanks currently being designed for the Multi-Function Waste Tank Facility (MWTF), project W-236A. The current preliminary design for the waste storage primary tank heat removal system consists of the following subsystems: (1) a once-through dome space ventilation system; (2) a recirculation dome space ventilation system; and (3) an annulus ventilation system. Recently completed and ongoing studies have evaluated alternative heat removal systems in an attempt to reduce system costs and to optimize heat removal capabilities. In addition, a thermal/heat transfer analysis is being performed that will provide assurance that the heat removal systems selected will be capable of removing the total primary tank design heat load of 1.25 MBtu/hr at an allowable operating temperature of 190 F. Although 200 F is the design temperature limit, 190 F has been selected as the maximum allowable operating temperature limit based on instrumentation sensitivity, instrumentation location sensitivity, and other factors. Seven options are discussed and recommendations are made

Ovarian damage due to cyst removal

DEFF Research Database (Denmark)

Perlman, Signe; Kjer, Jens J

2016-01-01

INTRODUCTION: Surgical treatment of endometriomas and potential damage to the ovary have been debated. Studies have described the inconsistent risk of unintended removal of ovarian tissue when a cystectomy of an endometrioma is performed. We evaluated the risk of inadvertently removed ovarian tis...

Research progress of siloxane removal from biogas

Directory of Open Access Journals (Sweden)

Gao Ruiling

2017-01-01

Full Text Available Siloxanes in biogas are detrimental to engine, turbine, fuel cell, etc., thus it is necessary to remove siloxanes from biogas before biogas high-value utilization. At present, there are few domestic researches and related reports in view of siloxanes removal from biogas. This paper introduces the property of siloxanes as well as sampling and analysis method, and then presents the research progress of siloxanes removal from biogas. Three commercial technologies overseas are adsorption, absorption and cryogenic condensation. Among them, adsorption on activated carbon is the most widely used method. Other technologies, such as biological removal, catalytic processes, membranes, source controlling, etc. are under exploration and development. At last, this paper summarizes the advantages and disadvantages of siloxanes removal technologies as well as the applicability and analyzes the future research trend and emphasis. This paper could provide a reference in the field of biogas high-value utilization.

Enhanced Biological Phosphorus Removal: Metabolic Insights and Salinity Effects

OpenAIRE

Welles, L.

2015-01-01

Enhanced biological phosphorus removal (EBPR) is a biological process for efficient phosphate removal from wastewaters through intracellular storage of polyphosphate by polyphosphate-accumulating organisms (PAO) and subsequent removal of PAO from the system through wastage of sludge. In comparison to physical and chemical phosphorus removal processes, the biological process has several advantages such as high removal efficiency, low cost, and no chemical sludge production, but disturbances an...

System for removing contaminants from plastic resin

Science.gov (United States)

Bohnert, George W.; Hand, Thomas E.; DeLaurentiis, Gary M.

2010-11-23

A resin recycling system that produces essentially contaminant-free synthetic resin material in an environmentally safe and economical manner. The system includes receiving the resin in container form. A grinder grinds the containers into resin particles. The particles are exposed to a solvent in one or more solvent wash vessels, the solvent contacting the resin particles and substantially removing contaminants on the resin particles. A separator is used to separate the resin particles and the solvent. The resin particles are then placed in solvent removing element where they are exposed to a solvent removing agent which removes any residual solvent remaining on the resin particles after separation.

Removal of Cobalt ion by Foam Flotation(I)

Energy Technology Data Exchange (ETDEWEB)

Jung, I.H.; Park, H.S.; Moon, J.S.; Yim, S.P.; Bae, K.K. [Korea Atomic Energy Research Institute (Korea)

1999-02-01

Simulated liquid waste containing 50 ppm cobalt ion was treated by precipitate flotation using the surfactant of sodium lauryl sulfate. The effects of initial cobalt ion concentration, pH, surfactant concentration, removal time, gas flow rate and foreign ions were estimated on removal efficiency. 35% H{sub 2}O{sub 2} was added for pre-treatment stage before precipitate flotation. As the result of pre-treatment, optimum removal pH and the pH of treated water being discharged were lowed and optimum removal pH range was broadened. For the result of this experiment, 99.8% removal efficiency was obtained at the condition of 50ppm of initial cobalt ion concentration, pH 9.5, 70 mL/min of gas flow rate, and 30 min of removal time. Attraction between precipitate and surfactant was supposed to be influenced by solubility and chemical affinity among species in solution as well as zeta potential. The influence of foreign ions such as, NO{sub 3}{sup -}, SO{sub 4}{sup -2}, Na{sup +}, Ca{sup +2} on the removal efficiency was also observed. Removal efficiency by precipitate flotation containing o.1 M of SO4{sup -}2 ion decreased to 90% due to the decrease of zeta potential and interruption of precipitation. 12 refs., 8 figs.

Electrochemical removal of phenol from oil refinery wastewater.

Science.gov (United States)

Abdelwahab, O; Amin, N K; El-Ashtoukhy, E-S Z

2009-04-30

This study explores the possibility of using electrocoagulation to remove phenol from oil refinery waste effluent using a cell with horizontally oriented aluminum cathode and a horizontal aluminum screen anode. The removal of phenol was investigated in terms of various parameters namely: pH, operating time, current density, initial phenol concentration and addition of NaCl. Removal of phenol during electrocoagulation was due to combined effect of sweep coagulation and adsorption. The results showed that, at high current density and solution pH 7, remarkable removal of 97% of phenol after 2h can be achieved. The rate of electrocoagulation was observed to increase as the phenol concentration decreases; the maximum removal rate was attained at 30 mg L(-1) phenol concentration. For a given current density using an array of closely packed Al screens as anode was found to be more effective than single screen anode, the percentage phenol removal was found to increase with increasing the number of screens per array. After 2h of electrocoagulation, 94.5% of initial phenol concentration was removed from the petroleum refinery wastewater. Energy consumption and aluminum Electrode consumption were calculated per gram of phenol removed. The present study shows that, electrocoagulation of phenol using aluminum electrodes is a promising process.

Removal of overburden soils from buried waste sites

International Nuclear Information System (INIS)

Rice, P.M.

1994-01-01

Transuranic (TRU) waste buried in pits and trenches is covered with a soil cap, or overburden, to shed water. During retrieval operations, the overburden (expected to be clean) must be removed carefully to avoid breaching the soil/waste matrix within a pit or trench and to confine any possible local spot contamination. This necessitates removal in precise (7.6- to 15.25-cm) increments with a high degree of accuracy. In addition, during overburden removal the overburden must be characterized to a depth that exceeds each cut of soil. A field demonstration was conducted to evaluate a technology for removing overburden soils a the Radioactive Waste Management Complex (RWMC), Subsurface Disposal Area (SDA) at the Idaho National Engineering Laboratory (INEL). The demonstration evaluated equipment performance and techniques for removing overburden soil and controlling contamination and dust. To evaluate the performance of these techniques during removal operations, personnel took air particulate samples, physical measurements of the soil cuts, maneuverability measurements, and rate of soil removal data. The overburden was spiked at specific locations and depths with rare earth tracers to provide a medium for evaluating samples. Analysis to determine the precision and accuracy of the soil removal, amount of dust generated, and potential spread of contamination was performed

Boron removal by electrocoagulation and recovery.

Science.gov (United States)

Isa, Mohamed Hasnain; Ezechi, Ezerie Henry; Ahmed, Zubair; Magram, Saleh Faraj; Kutty, Shamsul Rahman Mohamed

2014-03-15

This work investigated the removal of boron from wastewater and its recovery by electrocoagulation and hydrothermal mineralization methods respectively. The experimental design was developed using Box-Behnken Model. An initial study was performed based on four preselected variables (pH, current density, concentration and time) using synthetic wastewater. Response surface methodology (RSM) was used to evaluate the effect of process variables and their interaction on boron removal. The optimum conditions were obtained as pH 6.3, current density 17.4 mA/cm(2), and time 89 min. At these applied optimum conditions, 99.7% boron removal from an initial concentration of 10.4 mg/L was achieved. The process was effectively optimized by RSM with a desirability value of 1.0. The results showed that boron removal efficiency enhanced with increase in current density and treatment time. Removal efficiency also increased when pH was increased from 4 to 7 and subsequently decreased at pH 10. Adsorption kinetics study revealed that the reaction followed pseudo second order kinetic model; evidenced by high correlation and goodness of fit. Thermodynamics study showed that mechanism of boron adsorption was chemisorption and the reaction was endothermic in nature. Furthermore, the adsorption process was spontaneous as indicated by negative values of the adsorption free energy. Treatment of real produced water using electrocoagulation resulted in 98% boron removal. The hydrothermal mineralization study showed that borate minerals (Inyoite, Takadaite and Nifontovite) can be recovered as recyclable precipitate from electrocoagulation flocs of produced water. Copyright © 2013 Elsevier Ltd. All rights reserved.

Atrazine removal in Danish anaerobic aquifers

DEFF Research Database (Denmark)

Pedersen, Philip Grinder; Arildskov, N.P.; Albrechtsen, Hans-Jørgen

2002-01-01

process was abiotic since atrazine was also removed from microbially inhibited autoclaved and chloroform amended controls, although in controls amended with mercury, atrazine removal was slowed down. (ring-U-C-14)- atrazine amended samples showed no mineralization to (CO2)-C-14 or transformation...

Laser-based coatings removal

International Nuclear Information System (INIS)

Freiwald, J.G.; Freiwald, D.A.

1995-01-01

Over the years as building and equipment surfaces became contaminated with low levels of uranium or plutonium dust, coats of paint were applied to stabilize the contaminants in place. Most of the earlier paint used was lead-based paint. More recently, various non-lead-based paints, such as two-part epoxy, are used. For D ampersand D (decontamination and decommissioning), it is desirable to remove the paints or other coatings rather than having to tear down and dispose of the entire building. This report describes the use of pulse-repetetion laser systems for the removal of paints and coatings

Optimising laser tattoo removal

Directory of Open Access Journals (Sweden)

Kabir Sardana

2015-01-01

Full Text Available Lasers are the standard modality for tattoo removal. Though there are various factors that determine the results, we have divided them into three logical headings, laser dependant factors such as type of laser and beam modifications, tattoo dependent factors like size and depth, colour of pigment and lastly host dependent factors, which includes primarily the presence of a robust immune response. Modifications in the existing techniques may help in better clinical outcome with minimal risk of complications. This article provides an insight into some of these techniques along with a detailed account of the factors involved in tattoo removal.

Optimising Laser Tattoo Removal

Science.gov (United States)

Sardana, Kabir; Ranjan, Rashmi; Ghunawat, Sneha

2015-01-01

Lasers are the standard modality for tattoo removal. Though there are various factors that determine the results, we have divided them into three logical headings, laser dependant factors such as type of laser and beam modifications, tattoo dependent factors like size and depth, colour of pigment and lastly host dependent factors, which includes primarily the presence of a robust immune response. Modifications in the existing techniques may help in better clinical outcome with minimal risk of complications. This article provides an insight into some of these techniques along with a detailed account of the factors involved in tattoo removal. PMID:25949018

Laser-based coatings removal

Energy Technology Data Exchange (ETDEWEB)

Freiwald, J.G.; Freiwald, D.A. [F2 Associates, Inc., Albuquerque, NM (United States)

1995-10-01

Over the years as building and equipment surfaces became contaminated with low levels of uranium or plutonium dust, coats of paint were applied to stabilize the contaminants in place. Most of the earlier paint used was lead-based paint. More recently, various non-lead-based paints, such as two-part epoxy, are used. For D&D (decontamination and decommissioning), it is desirable to remove the paints or other coatings rather than having to tear down and dispose of the entire building. This report describes the use of pulse-repetetion laser systems for the removal of paints and coatings.

Process and system for removing tritium

International Nuclear Information System (INIS)

Ridgely, J.N.

1976-01-01

A process and system for removing tritium, particularly from high temperature gas cooled atomic reactors (HTGR), is disclosed. Portions of the reactor coolant, which is permeated with the pervasive tritium atom, are processed to remove the tritium. Under conditions of elevated temperature and pressure, the reactor coolant is combined with gaseous oxygen, resulting in the formation of tritiated water vapor from the tritium in the reactor coolant and the gaseous oxygen. The tritiated water vapor and the remaining gaseous oxygen are then successively removed by fractional liquefaction steps. The reactor coolant is then recirculated to the reactor

[Removable partial dentures. Oral functions and types

OpenAIRE

Creugers, N.H.J.; Baat, C. de

2009-01-01

A removable partial denture enables the restoration or improvement of 4 oral functions: aesthetics, mandibular stability, mastication, and speech. However, wearing a removable partial denture should not cause oral comfort to deteriorate. There are 3 types of removable partial dentures: acrylic tissue-supported dentures, dentures with cast metal frameworks en dentures with cast metal frameworks and (semi)precision attachments. Interrupted tooth arches,free-ending tooth arches, and a combinatio...

Study on diverse passive decay heat removal approach and principle

International Nuclear Information System (INIS)

Lin Qian; Si Shengyi

2012-01-01

Decay heat removal in post-accident is one of the most important aspects concerned in the reactor safety analysis. Passive decay heat removal approach is used to enhance nuclear safety. In advanced reactors, decay heat is removed by multiple passive heat removal paths through core to ultimate heat sink by passive residual heat removal system, passive injection system, passive containment cooling system and so on. Various passive decay heat removal approaches are summarized in this paper, the common features and differences of their heat removal paths are analyzed, and the design principle of passive systems for decay heat removal is discussed. It is found that. these decay heat removal paths is combined by some basic heat transfer processes, by the combination of these basic processes, diverse passive decay heat removal approach or system design scheme can be drawn. (authors)

49 CFR 193.2173 - Water removal.

Science.gov (United States)

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Water removal. 193.2173 Section 193.2173...: FEDERAL SAFETY STANDARDS Design Impoundment Design and Capacity § 193.2173 Water removal. (a) Impoundment areas must be constructed such that all areas drain completely to prevent water collection. Drainage...

Removal of COD from laundry wastewater by electrocoagulation/electroflotation

International Nuclear Information System (INIS)

Wang, C.-T.; Chou, W.-L.; Kuo, Y.-M.

2009-01-01

The removal efficiency of COD in the treatment of simulated laundry wastewater using electrocoagulation/electroflotation technology is described. The experimental results showed that the removal efficiency was better, reaching to about 62%, when applying ultrasound to the electrocoagulation cell. The solution pH approached neutrality in all experimental runs. The optimal removal efficiency of COD was obtained by using the applied voltage of 5 V when considering the energy efficiency and the acceptable removal efficiency simultaneously. The Cl - concentration of less than 2500 ppm had a positive effect on the removal efficiency. The performance of the monopolar connection of electrodes was better than that of the bipolar connection in this work. In addition, the removal efficiency of using Al electrodes was higher in comparison with using Fe electrodes in the study. The highest COD removal amount per joule was found to be 999 mg dm -3 kW h -1 while using two Al electrodes, although the removal efficiency increased with the number of Al plates

Simple Technique for Removing Broken Pedicular Screws

Directory of Open Access Journals (Sweden)

A Agrawal

2014-03-01

Full Text Available The procedure for removing a broken pedicle screw should ideally be technically easy and minimally invasive, as any damage to the pedicle, during removal of the broken screw, may weaken the pedicle, thus compromising on the success of re-instrumentation. We describe the case of a 32-year old man who had undergone surgery for traumatic third lumbar vertebral body fracture three years prior to current admission and had developed the complication of pedicle screw breakage within the vertebral body. The patient underwent re-exploration and removal of the distal screws. Through a paravertebral incision and muscle separation, the screws and rods were exposed and the implants were removed.

Removal of bromates from water

Science.gov (United States)

Barlokova, D.; Ilavsky, J.; Marko, I.; Tkacova, J.

2017-10-01

Bromates are substances that are usually not present in drinking water. They are obtained by ozone disinfection in the presence of bromine ions in water, as an impurity of sodium hypochlorite, respectively. Because of their specific properties, bromates are classified as vary dangers substances, that can cause serious illnesses in humans. There are several technological processes that have been used to the removal of bromates from water at present. In this article, the removal of the bromates from water by the adsorption using various sorbent materials (activated carbon, zeolite, Klinopur-Mn, Bayoxide E33, GEH, Read-As and Activated alumina) are presented. The effectiveness of selected sorbent materials in the removal of bromates from drinking water moves in the interval from 10 to 40%. Based on laboratory results, the zeolite can be used to reduce the concentration of bromates in water.

Experience with antimony activity removal process in Indian PHWRs

International Nuclear Information System (INIS)

Velmurugan, S.; Mittal, Vinit K.; Kumbhar, A.G.; Narasimhan, S.V.; Bhat, H.R.; Krishna Rao, K.S.; Upadhyay, S.K.; Jain, A.K.

2008-01-01

The problem of antimony (Sb) activity during decontamination was first encountered in NAPS-1 and Sb activity deposition took place during the decontamination resulting in poor decontamination factors (DF). Sb problem has been observed in PWRs and PHWRs elsewhere also. These utilities use an oxidative process involving the addition of H 2 O 2 to remove these Sb activities from the core and remove it on ion exchange resins. Experience in CANDU PHWRs indicated disappearance of H 2 O 2 in quantities higher than that observed in PWRs. This is attributed to the higher pick-up of H 2 O 2 by the magnetite/ferrites over large carbon steel surface present in the primary coolant system of PHWRs. Systematic work was carried out to understand the deposition of Sb on PHT system surfaces and a new method was evolved to remove the Sb activities from the system. This alternative reductive chemical process involve the addition of Nitrilo Tri Acetic Acid, Citric Acid and Rodine-92B and circulating the chemicals for a short period and then the Sb and other activities released from the core are removed by the mixed bed. Subsequent to the Sb removal process, the normal chemical decontamination of the system is carried out to remove 60 Co and other activities. This non-oxidizing Sb removal process was applied to NAPS-2 primary system prior to EMCCR. During this Sb removal process of NAPS-2, around 450 μCi/L activity of 124 Sb was released from the system surfaces to the formulation. Activity measurement in the samples collected and the on-line radiation field data indicated that deposition of Sb activities on system surfaces has been prevented by Rodine-92B and subsequently these activities have been removed by mixed bed IX columns. Antimony removal process worked successfully, but in the second normal decontamination process around 150 μCi/L activities came in the formulation which was not anticipated. As a result DF observed immediately after the decontamination campaign was not good

Medical application of laser hair removal

International Nuclear Information System (INIS)

Fadlalla, Alwalled Hussein Ataalmannan

2015-12-01

The use of laser in medical treatment has become of paramount importance proportional to what has high therapeutic privileges such as speed and accuracy in penetrating tissues and high quality especially when used in hair removal which is the subject of our study, this laser operates cards may cause some change in the color of the skin when used in a manner that is correct ratio of the thermal impact force in the laser hair removal process, or if it is exposed directly to his eye. This study is a comparison between the physical properties of laser of lasers used in hair removal, according to previous studies to be the basis for the benefit of doctors who use lasers for hair removal. The aim of this study was to study the effect of laser hair removal using the Nd: YAG laser with a wavelength 1064 nm as well as the risks airing from the assessment. The aim of this study was to identify the appropriate laser energy that absorbed in the hair follicle with a dark color and the appropriate thermal effect occurs to vaporize the follicle cell, a 40 J/cm"2 is to be significant without side effects for healthy tissue. In this study doses for a few laser beam is considered when compared to previous studies. Laser danger to the patient during the operation increases with increasing laser energy emitted during treatment. Laser hair removal by the user and energy emitted by wavelength of the laser device also depends on the hair color and roughness as well as skin color. (Author)

Benchmarking Biological Nutrient Removal in Wastewater Treatment Plants

DEFF Research Database (Denmark)

Flores-Alsina, Xavier; Gernaey, Krist; Jeppsson, Ulf

2011-01-01

This paper examines the effect of different model assumptions when describing biological nutrient removal (BNR) by the activated sludge models (ASM) 1, 2d & 3. The performance of a nitrogen removal (WWTP1) and a combined nitrogen and phosphorus removal (WWTP2) benchmark wastewater treatment plant...

Removal of chloride from MSWI fly ash.

Science.gov (United States)

Chen, Wei-Sheng; Chang, Fang-Chih; Shen, Yun-Hwei; Tsai, Min-Shing; Ko, Chun-Han

2012-10-30

The high levels of alkali chloride and soluble metal salts present in MSWI fly ash is worth noting for their impact on the environment. In addition, the recycling or reuse of fly ash has become an issue because of limited landfill space. The chloride content in fly ash limits its application as basis for construction materials. Water-soluble chlorides such as potassium chloride (KCl), sodium chloride (NaCl), and calcium chloride hydrate (CaCl(2) · 2H(2)O) in fly ash are easily washed away. However, calcium chloride hydroxide (Ca(OH)Cl) might not be easy to leach away at room temperature. The roasting and washing-flushing processes were applied to remove chloride content in this study. Additionally, air and CO(2) were introduced into the washing process to neutralize the hazardous nature of chlorides. In comparison with the water flushing process, the roasting process is more efficient in reducing the process of solid-liquid separation and drying for the reuse of Cl-removed fly ash particles. In several roasting experiments, the removal of chloride content from fly ash at 1050°C for 3h showed the best results (83% chloride removal efficiency). At a solid to liquid ratio of 1:10 the water-flushing process can almost totally remove water-soluble chloride (97% chloride removal efficiency). Analyses of mineralogical change also prove the efficiency of the fly ash roasting and washing mechanisms for chloride removal. Copyright © 2012 Elsevier B.V. All rights reserved.

Power plant removal costs

International Nuclear Information System (INIS)

Ferguson, J.S.

1998-01-01

The financial, regulatory and political significance of the estimated high removal costs of nuclear power plants has generated considerable interest in recent years, and the political significance has resulted in the Nuclear Regulatory Commission (NRC) eliminating the use of conventional depreciation accounting for the decontamination portion of the removal (decommissioning). While nuclear plant licensees are not precluded from utilizing conventional depreciation accounting for the demolition of non-radioactive structures and site restoration, state and federal utility regulators have not been favorably inclined to requests for this distinction. The realization that steam-generating units will be more expensive to remove, relative to their original cost, predates the realization that nuclear units will be expensive. However, the nuclear issues have overshadowed this realization, but are unlikely to continue to do so. Numerous utilities have prepared cost estimates for steam generating units, and this presentation discusses the implications of a number of such estimates that are a matter of public record. The estimates cover nearly 400 gas, oil, coal and lignite generating units. The earliest estimate was made in 1978, and for analysis purposes the author has segregated them between gas and oil units, and coal and lignite units

Screening and characterization of useful microorganisms to arsenic removal

OpenAIRE

宮武, 宗利; 林, 幸男

2007-01-01

Microorganisms were isolated from soil and their arsenic removal abilities were evaluated. Seven out of the 100 isolated strains showed more than 20% arsenic removal. Time courses of arsenic removal and cell growth were investigated in three of these isolated strains. Although the growth rates were different, the dependence of arsenic removal on cell growth was similar in three strains (A-84, 88, 89). Strain A-89 showed highest arsenic removal rate of 63% after first day. Strain A-88 was best...

The Social, Historical, and Institutional Contingencies of Dam Removal

Science.gov (United States)

Magilligan, F. J.; Sneddon, C. S.; Fox, C. A.

2017-06-01

Environmental managers in the United States and elsewhere are increasingly perceiving dam removal as a critical tool for river restoration and enhancing watershed resilience. In New England, over 125 dams have been dismantled for ecological and economic rationales. A surprising number of these removals, including many that are ongoing, have generated heated conflicts between restoration proponents and local communities who value their dammed landscapes. Using a comparative case study approach, we examine the environmental conflict around efforts to remove six dams in New England. Each of these removal efforts followed quite different paths and resultant outcomes: successful removal, stalled removal, and failure despite seemingly favorable institutional conditions. Lengthy conflicts often transpired in instances where removals occurred, but these were successfully arbitrated by paying attention to local historical-geographical conditions conducive to removal and by brokering effective compromises between dam owners and the various local actors and stakeholders involved in the removal process. Yet our results across all cases suggest that these are necessary, but not sufficient conditions for restoration through dam removal since a similar set of conditions typified cases where removals are continuously stalled or completely halted. Scholars examining the intersection between ecological restoration and environmental politics should remain vigilant in seeking patterns and generalities across cases of environmental conflict in order to promote important biophysical goals, but must also remain open to the ways in which those goals are thwarted and shaped by conflicts that are deeply contingent on historical-geographical conditions and broader institutional networks of power and influence.

The Social, Historical, and Institutional Contingencies of Dam Removal.

Science.gov (United States)

Magilligan, F J; Sneddon, C S; Fox, C A

2017-06-01

Environmental managers in the United States and elsewhere are increasingly perceiving dam removal as a critical tool for river restoration and enhancing watershed resilience. In New England, over 125 dams have been dismantled for ecological and economic rationales. A surprising number of these removals, including many that are ongoing, have generated heated conflicts between restoration proponents and local communities who value their dammed landscapes. Using a comparative case study approach, we examine the environmental conflict around efforts to remove six dams in New England. Each of these removal efforts followed quite different paths and resultant outcomes: successful removal, stalled removal, and failure despite seemingly favorable institutional conditions. Lengthy conflicts often transpired in instances where removals occurred, but these were successfully arbitrated by paying attention to local historical-geographical conditions conducive to removal and by brokering effective compromises between dam owners and the various local actors and stakeholders involved in the removal process. Yet our results across all cases suggest that these are necessary, but not sufficient conditions for restoration through dam removal since a similar set of conditions typified cases where removals are continuously stalled or completely halted. Scholars examining the intersection between ecological restoration and environmental politics should remain vigilant in seeking patterns and generalities across cases of environmental conflict in order to promote important biophysical goals, but must also remain open to the ways in which those goals are thwarted and shaped by conflicts that are deeply contingent on historical-geographical conditions and broader institutional networks of power and influence.

Short communication Biological removal of nitrogen species from ...

African Journals Online (AJOL)

The gravel-packed column reactor was found to be unsuitable for the removal of nitrate in the configuration used (maximum 15% removal efficiency). The critical parameters for denitrification are nitrate concentration, temperature, influent flow rate and mean cell retention time. Nitrate removal did not meet the expectations ...

30 CFR 57.12036 - Fuse removal or replacement.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Fuse removal or replacement. 57.12036 Section 57.12036 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Electricity Surface and Underground § 57.12036 Fuse removal or replacement. Fuses shall not be removed or...

Latest innovations for tattoo and permanent makeup removal.

Science.gov (United States)

Mao, Johnny C; DeJoseph, Louis M

2012-05-01

The goal of this article is to reveal the latest techniques and advances in laser removal of both amateur and professional tattoos, as well as cosmetic tattoos and permanent makeup. Each pose different challenges to the removing physician, but the goal is always the same: removal without sequelae. The authors' technique is detailed, and discussion of basic principles of light reflection, ink properties, effects of laser energy and heat, and outcomes and complications of tattoo removal are presented. Copyright © 2012 Elsevier Inc. All rights reserved.

Removal of radium from drinking water

International Nuclear Information System (INIS)

Clifford, D.A.

1990-01-01

The traditional, proven process for radium removal are sodium ion exchange softening, lime softening, and reverse osmosis. The newer, radium-specific column processes include adsorption onto the Dow RSC and BaSO 4 -impregnated alumina. The most promising new radium-specific treatment process for large-scale use is adsorption onto preformed manganese dioxide followed by multimedia or diatomaceous earth filtration The disposal of radium-contaminated wastewaters and sludges from processes under consideration will be a major factor in process selection. The processes of choice for municipal water supply treatment to remove radium are sodium ion exchange softening, lime softening, manganese dioxide adsorption-filtration, and selective adsorption onto the Dow RSC or BaSO 4 -impregnated alumina. Where the water is brackish, reverse osmosis hyperfiltration should also be considered. The radium removal process of choice for whole-house or point-of-entry treatment is sodium ion exchange softening. For point-of-use radium removal, a standard reverse osmosis system including cartridge filtration, activated carbon adsorption, and reverse osmosis hyperfiltration is recommended. Although no cost estimates have been made, the relative costs from most expensive to least expansive, for radium removal in small community water supplies are reverse osmosis, sodium ion exchange softening, lime soda softening, manganese dioxide adsorption-filtration, and the radium-selective adsorbents. 34 refs., 7 figs., 2 tabs

How to remove a chest drain.

Science.gov (United States)

Allibone, Elizabeth

2015-10-07

RATIONALE AND KEY POINTS: This article aims to help nurses to undertake the removal of a chest drain in a safe, effective and patient-centred manner. This procedure requires two practitioners. The chest drain will have been inserted aseptically to remove air, blood, fluid or pus from the pleural cavity. ▶ Chest drains may be small or wide bore depending on the underlying condition and clinical setting. They may be secured with a mattress suture and/or an anchor suture. ▶ Chest drains are usually removed under medical instructions when the patient's lung has inflated, the underlying condition has resolved, there is no evidence of respiratory compromise or failure, and their anticoagulation status has been assessed as satisfactory. ▶ Chest drains secured with a mattress suture should be removed by two practitioners. One practitioner is required to remove the tube and the other to tie the mattress suture (if present) and secure the site. REFLECTIVE ACTIVITY: Clinical skills articles can help update your practice and ensure it remains evidence based. Apply this article to your practice. Reflect on and write a short account of: 1. How reading this article will change your practice. 2. How this article could be used to educate patients with chest drains. Subscribers can upload their reflective accounts at: rcni.com/portfolio .

Removal of arsenate from groundwater by electrocoagulation method.

Science.gov (United States)

Ali, Imran; Khan, Tabrez A; Asim, Mohd

2012-06-01

Arsenic, a toxic metalloid in drinking water, has become a major threat for human beings and other organisms. In the present work, attempts have been made to remove arsenate from the synthetic as well as natural water of Ballia district, India by electrocoagulation method. Efforts have also been made to optimize the various parameters such as initial arsenate concentration, pH, applied voltage, processing time, and working temperature. Electrocoagulation is a fast, inexpensive, selective, accurate, reproducible, and eco-friendly method for arsenate removal from groundwater. The present paper describes an electrocoagulation method for arsenate removal from groundwater using iron and zinc as anode and cathode, respectively. The maximum removal of arsenate was 98.8% at 2.0 mg L(-1), 7.0, 3.0 V, 10.0 min, and 30°C as arsenate concentration, pH, applied voltage, processing time, and working temperature, respectively. Relative standard deviation, coefficient of determination (r (2)), and confidence limits were varied from 1.50% to 1.59%, 0.9996% to 0.9998%, and 96.0% to 99.0%, respectively. The treated water was clear, colorless, and odorless without any secondary contamination. The developed and validated method was applied for arsenate removal of two samples of groundwater of Ballia district, U.P., India, having 0.563 to 0.805 mg L(-1), arsenate concentrations. The reported method is capable for the removal of arsenate completely (100% removal) from groundwater of Ballia district. There was no change in the groundwater quality after the removal of arsenate. The treated water was safe for drinking, bathing, and recreation purposes. Therefore, this method may be the choice of arsenate removal from natural groundwater.

Thermally modified bentonite clay for copper removal

International Nuclear Information System (INIS)

Bertagnolli, C.; Kleinübing, S.J.; Silva, M.G.C.

2011-01-01

Bentonite clay coming from Pernambuco was thermally modified in order to increase its affinity and capacity in the copper removal in porous bed. The application of this procedure is justified by the low cost of clay, their abundance and affinity for various metal ions. Thermally treatment modifies the clay adsorption properties enables its use in porous bed system, with the increase in surface area and mechanical strength. The material was characterized by x-ray diffraction, thermogravimetric analysis and N_2 physisorption. Then tests were carried out for adsorption of copper in various experimental conditions and evaluated the mass transfer zone, useful and total adsorbed removal amounts and total copper removal percentage. The results showed that the clay treated at higher temperature showed higher copper removal. (author)

Removal of COD from laundry wastewater by electrocoagulation/electroflotation

Energy Technology Data Exchange (ETDEWEB)

Wang, C.-T. [Department of Safety Health and Environmental Engineering, Chung Hwa University of Medical Technology, Tainan County, Hsien 717, Taiwan (China)], E-mail: ctwwang@mail.hwai.edu.tw; Chou, W.-L. [Department of Safety Health and Environmental Engineering and Institute of Occupational Safety and Hazard Prevention, HungKuang University, Sha-Lu, Taichung 433, Taiwan (China); Kuo, Y.-M. [Department of Safety Health and Environmental Engineering, Chung Hwa University of Medical Technology, Tainan County, Hsien 717, Taiwan (China)

2009-05-15

The removal efficiency of COD in the treatment of simulated laundry wastewater using electrocoagulation/electroflotation technology is described. The experimental results showed that the removal efficiency was better, reaching to about 62%, when applying ultrasound to the electrocoagulation cell. The solution pH approached neutrality in all experimental runs. The optimal removal efficiency of COD was obtained by using the applied voltage of 5 V when considering the energy efficiency and the acceptable removal efficiency simultaneously. The Cl{sup -} concentration of less than 2500 ppm had a positive effect on the removal efficiency. The performance of the monopolar connection of electrodes was better than that of the bipolar connection in this work. In addition, the removal efficiency of using Al electrodes was higher in comparison with using Fe electrodes in the study. The highest COD removal amount per joule was found to be 999 mg dm{sup -3} kW h{sup -1} while using two Al electrodes, although the removal efficiency increased with the number of Al plates.

Removal of inclusions from silicon

Science.gov (United States)

Ciftja, Arjan; Engh, Thorvald Abel; Tangstad, Merete; Kvithyld, Anne; Øvrelid, Eivind Johannes

2009-11-01

The removal of inclusions from molten silicon is necessary to satisfy the purity requirements for solar grade silicon. This paper summarizes two methods that are investigated: (i) settling of the inclusions followed by subsequent directional solidification and (infiltration by ceramic foam filters. Settling of inclusions followed by directional solidification is of industrial importance for production of low-cost solar grade silicon. Filtration is reported as the most efficient method for removal of inclusions from the top-cut silicon scrap.

The study of hydrogen removal

International Nuclear Information System (INIS)

Yasufuku, Katsumi; Fukuhara, Masashi; Izaki, Takashi; Nakase, Takeshi

1979-01-01

Two methods of hydrogen removal from the helium coolant for high temperature helium gas-cooled nuclear reactor plants were investigated; the one is the process absorbing hydrogen with titanium sponges and the other is the water removal with zeolite, after hydrogen is converted to water utilizing copper oxide (CuO). The special feature of these two hydrogen removal methods is to treat the very low hydrogen concentration in helium about 0.06 mm Hg (2 Vpm, 41 ata). As for the titanium sponge method, a preliminary experimental facility was constructed to test the temperature dependences of the quantity of equilibrium absorption of hydrogen and the diffusion velocity inside titanium sponge by the batch type constant volume process. The temperature of titanium sponge was 800 deg C, the vacuum was from 2 to 3 x 10 -7 mm Hg and hydrogen partial pressure was from 1.0 to 10 -4 mm Hg in the experiment. The measured hydrogen absorption rate and the diffusion velocity data are presented, and the experimental conditions were evaluated. After the preliminary experiment, a mini-loop was constructed to confirm the temperature and velocity dependences of overall capacity factor, and the overall capacity factor and the regenerating characteristics of titanium sponge were tested. These experimental data are shown, and were evaluated. Concerning the hydrogen removal method utilizing CuO, the experiment was carried out under the following test conditions: the temperature from 400 to 265 deg C, the linear velocity from 50.3 to 16.7 cm/sec and the hydrogen concentration from 12.0 to 1.93 mm/Hg. The hydrogen removal rate and capacity were obtained in this experiment, and the data are presented and explained. (Nakai, Y.)

30 CFR 56.12036 - Fuse removal or replacement.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Fuse removal or replacement. 56.12036 Section 56.12036 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... § 56.12036 Fuse removal or replacement. Fuses shall not be removed or replaced by hand in an energized...

22 CFR 40.91 - Certain aliens previously removed.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Certain aliens previously removed. 40.91... IMMIGRANTS UNDER THE IMMIGRATION AND NATIONALITY ACT, AS AMENDED Aliens Previously Removed § 40.91 Certain aliens previously removed. (a) 5-year bar. An alien who has been found inadmissible, whether as a result...

5 CFR 359.405 - Removal: Reduction in force.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Removal: Reduction in force. 359.405... Appointees During Probation § 359.405 Removal: Reduction in force. (a) Coverage. This section covers the removal of a career appointee from the SES during the probationary period under a reduction in force. (b...

Feasibility Assessment of Cesium Removal using Microaglae

Energy Technology Data Exchange (ETDEWEB)

Kim, Ilgook; Ryu, Byung-Gon; Seo, Bum-Kyoung; Moon, Jei Kwon; Choi, Jong-Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

The aim of this work is to assess the feasibility of selected one of microalgae in the uptake of Cs+. The obtained results showed the maximum Cs+ removal by D. armatus SCK was 280μM indicating 70% removal efficiency. Also, D. armatus SCK could uptake Cs+ in the presence of K+, is particularly known to be transported into cells as an analog of Cs+ in freshwater condition. Recently, increased attention has been directed on the use of biological technologies for the removal of radionuclides as the cheap and eco-friendly alternative to the non-biological methods. Metal including radioactive compounds uptake by microorganisms can be occurred by metabolism –independent and/or -dependent processes. One involves biosorption based on the ability of microbial cells to bind dissolved metals; on the other involves bioaccumulation, which depends on the metabolic ability of cells to transport metals into the cytoplasm. The purpose of this work is to investigate the feasibility of microalgae in bioaccumulation system to remove cesium from solution. The effect of different environmental parameters on cesium removal was also examined.

Regenerating an Arsenic Removal Iron-Based Adsorptive ...

Science.gov (United States)

The replacement of exhausted, adsorptive media used to remove arsenic from drinking water accounts for approximately 80% of the total operational and maintenance (O/M) costs of this commonly used small system technology. The results of three, full scale system studies of an on-site media regeneration process (Part 1) showed it to be effective in stripping arsenic and other contaminants from the exhausted media. Part 2, of this two part paper, presents information on the performance of the regenerated media to remove arsenic through multiple regeneration cycles (3) and the approximate cost savings of regeneration over media replacement. The results of the studies indicate that regenerated media is very effective in removing arsenic and the regeneration cost is substantially less than the media replacement cost. On site regeneration, therefore, provides small systems with alternative to media replacement when removing arsenic from drinking water using adsorptive media technology. Part 2 of a two part paper on the performance of the regenerated media to remove arsenic through multiple regeneration cycles (3) and the approximate cost savings of regeneration over media replacement.

Arsenic removal by magnetic nanocrystalline barium hexaferrite

Energy Technology Data Exchange (ETDEWEB)

Patel, Hasmukh A.; Byun, Jeehye; Yavuz, Cafer T., E-mail: yavuz@kaist.ac.kr [Graduate School of EEWS, Korea Advanced Institute of Science and Technology (KAIST) (Korea, Republic of)

2012-07-15

Nanoscale magnetite (Fe{sub 3}O{sub 4}) (<15 nm) is known to remove arsenic efficiently but is very difficult to separate or require high magnetic fields to separate out from the waste water after treatment. Anisotropic hexagonal ferrite (BaFe{sub 12}O{sub 19}, BHF) is a well-known permanent magnet (i.e., fridge magnets) and attractive due to its low cost in making large quantities. BHF offers a viable alternative to magnetite nanocrystals for arsenic removal since it features surfaces similar to iron oxides but with much enhanced magnetism. Herein, we employ BHF nanocrystalline materials for the first time in arsenic removal from wastewater. Our results show better (75 %) arsenic removal than magnetite of the similar sizes. The BHF nanoparticles, 6.06 {+-} 0.52 nm synthesized by thermolysis method at 320 Degree-Sign C do not show hexagonal phase, however, subsequent annealing at 750 Degree-Sign C produced pure hexagonal BHF in >200 nm assemblies. By using BHF, we demonstrate that nanoparticle removal is more efficient and fixed bed type cartridge applications are more possible.

ADSORPTIVE REMOVAL OF FLUORIDE FROM WATER USING ...

African Journals Online (AJOL)

Preferred Customer

Currently available treatment methods for removal of excess fluoride from water are broadly divided into three ... the application of nanoparticles as sorbents for fluoride removal. Sundaram [26] studied the ... Characterization of adsorbent.

Standard Waste Box Lid Screw Removal Option Testing

International Nuclear Information System (INIS)

Anast, Kurt Roy

2016-01-01

This report provides results from test work conducted to resolve the removal of screws securing the standard waste box (SWB) lids that hold the remediated nitrate salt (RNS) drums. The test work evaluated equipment and process alternatives for removing the 42 screws that hold the SWB lid in place. The screws were secured with a red Loctite thread locker that makes removal very difficult because the rivets that the screw threads into would slip before the screw could be freed from the rivet, making it impossible to remove the screw and therefore the SWB lid.

Standard Waste Box Lid Screw Removal Option Testing

Energy Technology Data Exchange (ETDEWEB)

Anast, Kurt Roy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-03-11

This report provides results from test work conducted to resolve the removal of screws securing the standard waste box (SWB) lids that hold the remediated nitrate salt (RNS) drums. The test work evaluated equipment and process alternatives for removing the 42 screws that hold the SWB lid in place. The screws were secured with a red Loctite thread locker that makes removal very difficult because the rivets that the screw threads into would slip before the screw could be freed from the rivet, making it impossible to remove the screw and therefore the SWB lid.

Experience on sodium removal from various components

Energy Technology Data Exchange (ETDEWEB)

Kamei, M; Kanbe, M; Yagisawa, H; Sasaki, S; Kataoka, H; Fukada, T; Ishii, Y; Saito, R; Mimoto, Y [O-arai Engineering Centre, PNC, Ibaraki-ken, Tokio (Japan)

1978-08-01

Since 1970, OEC (O-arai Engineering Center) has been Investigating the following methods for removal of sodium from the components of sodium plants: steam cleaning for the 50 MW Steam Generator, secondary proto-type pump of 'JOYO' and Dummy fuel assembly of 'JOYO', alcohol cleaning for Sector Model of Intermediate Heat Exchanger (IHX) of 'JOYO', a sector model of Sodium-to-Air cooler of 'JOYO' and a proto-type isolation valve of 'JOYO' and cleaning by vacuumization at high temperature for Regenerative Heat Exchanger. This report describes the outline of the Sodium Disposal Facility and experience of sodium removal processing on the 50 MW Steam Generator, the crevices of the experimental sub-assemblies, the Fuel Handling Machine of 'MONJU' and the Regenerative Heat Exchanger of the Sodium Flow Test Facility. Through these experiences it was noted that, (1) Removal of sodium from crevices such as in bolted joints are very difficult. (2) Consideration is needed in the removal process where material damage might occur from the generation of hydro-oxides. (3) Some detection device to tell the completion of sodium removal as well as the end of reaction is required. (4) Requalification rules should be clarified. Efforts in this direction have been made in the case of a 'JOYO' prototype pump by reinstalling it after sodium removal five times. (author)

Experience on sodium removal from various components

International Nuclear Information System (INIS)

Kamei, M.; Kanbe, M.; Yagisawa, H.; Sasaki, S.; Kataoka, H.; Fukada, T.; Ishii, Y.; Saito, R.; Mimoto, Y.

1978-01-01

Since 1970, OEC (O-arai Engineering Center) has been Investigating the following methods for removal of sodium from the components of sodium plants: steam cleaning for the 50 MW Steam Generator, secondary proto-type pump of 'JOYO' and Dummy fuel assembly of 'JOYO', alcohol cleaning for Sector Model of Intermediate Heat Exchanger (IHX) of 'JOYO', a sector model of Sodium-to-Air cooler of 'JOYO' and a proto-type isolation valve of 'JOYO' and cleaning by vacuumization at high temperature for Regenerative Heat Exchanger. This report describes the outline of the Sodium Disposal Facility and experience of sodium removal processing on the 50 MW Steam Generator, the crevices of the experimental sub-assemblies, the Fuel Handling Machine of 'MONJU' and the Regenerative Heat Exchanger of the Sodium Flow Test Facility. Through these experiences it was noted that, (1) Removal of sodium from crevices such as in bolted joints are very difficult. (2) Consideration is needed in the removal process where material damage might occur from the generation of hydro-oxides. (3) Some detection device to tell the completion of sodium removal as well as the end of reaction is required. (4) Requalification rules should be clarified. Efforts in this direction have been made in the case of a 'JOYO' prototype pump by reinstalling it after sodium removal five times. (author)

Experience on sodium removal from various components

International Nuclear Information System (INIS)

Kamei, M.; Kanbe, M.; Yagisawa, H.; Sasaki, S.; Kataoka, H.

1978-02-01

Since 1970, OEC (O-arai Engineering Center) has been investigating the following methods for removal of sodium from the components of sodium plants: steam cleaning for the 50 MW Steam Generator, secondary proto-type pump of ''JOYO'' and Dummy fuel assembly of ''JOYO'', alcohol cleaning for Sector Model of Intermediate Heat Exchanger (IHX) of ''JOYO'', a sector model of Sodium-to-Air cooler of ''JOYO'' and a proto-type Isolation valve of ''JOYO'' and cleaning by vacuumization at high temperature for Regenerative Heat Exchanger. This report describes the outline of the Sodium Disposal Facility and experience of sodium removal processing on the 50 MW Steam Generator, the crevices of the experimental subassemblies, the Fuel Handling Machine of ''MONJU'' and the Regenerative Heat Exchanger of the Sodium Flow Test Facility. Through these experiences it was noted that, (1) Removal of Sodium from crevices such as in bolted joints are very difficult. (2) Consideration is needed in the removal process where material damage might occur from the generation of hydro-oxides. (3) Some detection device to tell the completion of sodium removal as well as the end of reaction is required. (4) Requalification rules should be clarified. Efforts in this direction have been made in the case of a ''JOYO'' prototype pump by reinstalling it after sodium removal five times. (author)

Arsenic Removal by Liquid Membranes

Directory of Open Access Journals (Sweden)

Tiziana Marino

2015-03-01

Full Text Available Water contamination with harmful arsenic compounds represents one of the most serious calamities of the last two centuries. Natural occurrence of the toxic metal has been revealed recently for 21 countries worldwide; the risk of arsenic intoxication is particularly high in Bangladesh and India but recently also Europe is facing similar problem. Liquid membranes (LMs look like a promising alternative to the existing removal processes, showing numerous advantages in terms of energy consumption, efficiency, selectivity, and operational costs. The development of different LM configurations has been a matter of investigation by several researching groups, especially for the removal of As(III and As(V from aqueous solutions. Most of these LM systems are based on the use of phosphine oxides as carriers, when the metal removal is from sulfuric acid media. Particularly promising for water treatment is the hollow fiber supported liquid membrane (HFSLM configuration, which offers high selectivity, easy transport of the targeted metal ions, large surface area, and non-stop flow process. The choice of organic extractant(s plays an essential role in the efficiency of the arsenic removal. Emulsion liquid membrane (ELM systems have not been extensively investigated so far, although encouraging results have started to appear in the literature. For such LM configuration, the most relevant step toward efficiency is the choice of the surfactant type and its concentration.

Removal (and attempted removal) of material from a Hooded Vulture ...

African Journals Online (AJOL)

Relatively little is documented about nest material theft in vultures. We used camera traps to monitor Hooded Vulture Necrosyrtes monachus nests for a year. We report camera trap photographs of a starling Lamprotornis sp. removing what appeared to be dung from an inactive Hooded Vulture nest on Cleveland Game ...

Pegasus International, Inc. coating removal systems

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-02-01

The Pegasus Coating Removal System (PCRS) was demonstrated at Florida International University (FIU) where it was being evaluated for efficiency and cost. In conjunction with the FIU testing demonstration, a human factors assessment was conducted to assess the hazards and associated safety and health issues of concern for workers utilizing this technology. The PCRS is a chemical paste that is applied to the surface using a brush, roller, or airless sprayer. After the type of PCRS, thickness, and dwell time have been determined, a laminated backed material is placed on top of the chemical paste to slow down the drying process and to provide a mechanism to strip-off the chemical. After the dwell time is reached, the chemical substrate can be removed. Scrapers may be used to break-loose the layers as necessary or to break-loose the layers that are not removed when the laminated paper is picked up. Residue may also be cleaned off of the surface with a damp sponge with an agitating motion, absorbent sponges, or a vacuum, as needed. The paint and removal agent is then placed in drums for disposal at a later time. During the assessment sampling was conducted for organic vapors and general observational techniques were conducted for ergonomics. Recommendations for improved worker safety and health during application and removal of the PCRS include: (1) work practices that reflect avoidance of exposure or reducing the risk of exposure; (2) assuring all PPE and equipment are compatible with the chemicals being used; (3) work practices that reduce the worker`s need to walk on the slippery surface caused by the chemical or the use of special anti-slip soles; (4) careful control of overspray (if a spray application is used); and (5) the use of ergonomically designed long-handled tools to apply and remove the chemical (to alleviate some of the ergonomic concerns).

Plant for removing radioactive rare gases

International Nuclear Information System (INIS)

An, Buzai; Kanazawa, Toshio

1977-01-01

The outline of the pilot plant to remove and recover radioactive rare gases generated from nuclear power plants, reprocessing installations for nuclear fuel, nuclear research installations, etc. is described below. Among the studies of various processes such as liquefaction and distillation, absorption into solvents, active carbon adsorption, diaphragm method, etc., the liquefaction and distillation process by rectification at low temperature has been positively developed. It is in the stage of practical application for removing rare gases in waste gases from reprocessing and nuclear power plants. This is the process with high safety and excellent rare gas removing capability. Further research and development have been also made for selective adsorption and desorption method at low temperature which is very efficient as there is no release of long life nuclides such as Krypton-85. Rare gases recovered by the above mentioned removal systems must be stored safely for a long time as their half lives are long and specific radioactivities are high. The study has been made continuously on the storage methods including adsorption in cylinders and remotely automatically sealing storing system. (Kobatake, H.)

[Fluorescence control of dental calculus removal].

Science.gov (United States)

Bakhmutov, D N; Gonchukov, S A; Lonkina, T V; Sukhinina, A V

2012-01-01

The main condition of periodontitis prevention is the full calculus removal from the teeth surface. This procedure should be fulfilled without harming adjacent unaffected tooth tissues. Nevertheless the problem of sensitive and precise estimating of tooth-calculus interface exists and potential risk of hard tissue damage remains. In the frames of this work it was shown that fluorescence diagnostics during calculus removal can be successfully used for precise detection of tooth-calculus interface. In so doing the simple implementation of this method free from the necessity of spectrometer using can be employed. Such a simple implementation of calculus detection set-up can be aggregated with the devices of calculus removing (as ultrasonic or laser devices).

Tritium removal and retention device

International Nuclear Information System (INIS)

Boyle, R.F.; Durigon, D.D.

1980-01-01

A device is provided for removing and retaining tritium from a gaseous medium, and also a method of manufacturing the device. The device, consists of an inner core of zirconium alloy, preferably Zircaloy-4, and an outer adherent layer of nickel which acts as a selective and protective window for passage of tritium. The tritium then reacts with or is absorbed by the zirconium alloy, and is retained until such time as it is desirable to remove it during reprocessing. (auth)

Removal mechanism of phosphate from aqueous solution by fly ash.

Science.gov (United States)

Lu, S G; Bai, S Q; Zhu, L; Shan, H D

2009-01-15

This work studied the effectiveness of fly ash in removing phosphate from aqueous solution and its related removal mechanism. The adsorption and precipitation of phosphate by fly ash were investigated separately in order to evaluate their role in the removal of phosphate. Results showed that the removal of phosphate by fly ash was rapid. The removal percentage of phosphate in the first 5min reached 68-96% of the maximum removal of phosphate by fly ash. The removal processes of phosphate by fly ash included a fast and large removal representing precipitation, then a slower and longer removal due to adsorption. The adsorption of phosphate on fly ash could be described well by Freundlich isotherm equation. The pH and Ca2+ concentration of fly ash suspension were decreased with the addition of phosphate, which suggests that calcium phosphate precipitation is a major mechanism of the phosphate removal. Comparison of the relative contribution of the adsorption and precipitation to the total removal of phosphate by fly ash showed that the adsorption accounted for 30-34% of the total removal of phosphate, depending on the content of CaO in fly ash. XRD patterns of the fly ash before and after phosphate adsorption revealed that phosphate salt (CaHPO4 x 2H2O) was formed in the adsorption process. Therefore, the removal of phosphate by fly ash can be attributed to the formation of phosphate precipitation as a brushite and the adsorption on hydroxylated oxides. The results suggested that the use of fly ash could be a promising solution to the removal of phosphate in the wastewater treatment and pollution control.

COD removal characteristics in air-cathode microbial fuel cells

KAUST Repository

Zhang, Xiaoyuan

2015-01-01

© 2014 Elsevier Ltd. Exoelectrogenic microorganisms in microbial fuel cells (MFCs) compete with other microorganisms for substrate. In order to understand how this affects removal rates, current generation, and coulombic efficiencies (CEs), substrate removal rates were compared in MFCs fed a single, readily biodegradable compound (acetate) or domestic wastewater (WW). Removal rates based on initial test conditions fit first-order kinetics, but rate constants varied with circuit resistance. With filtered WW (100Ω), the rate constant was 0.18h- 1, which was higher than acetate or filtered WW with an open circuit (0.10h- 1), but CEs were much lower (15-24%) than acetate. With raw WW (100Ω), COD removal proceeded in two stages: a fast removal stage with high current production, followed by a slower removal with little current. While using MFCs increased COD removal rate due to current generation, secondary processes will be needed to reduce COD to levels suitable for discharge.

Re-use of winery wastewaters for biological nutrient removal.

Science.gov (United States)

Rodríguez, L; Villaseñor, J; Buendía, I M; Fernández, F J

2007-01-01

The aim of this study was to evaluate the feasibility of the re-use of the winery wastewater to enhance the biological nutrient removal (BNR) process. In batch experiments it was observed that the addition of winery wastewater mainly enhanced the nitrogen removal process because of the high denitrification potential (DNP), of about 130 mg N/g COD, of the contained substrates. This value is very similar to that obtained by using pure organic substrates such as acetate. The addition of winery wastewater did not significantly affect either phosphorus or COD removal processes. Based on the experimental results obtained, the optimum dosage to remove each mg of N-NO3 was determined, being a value of 6.7 mg COD/mg N-NO3. Because of the good properties of the winery wastewater to enhance the nitrogen removal, the viability of its continuous addition in an activated sludge pilot-scale plant for BNR was studied. Dosing the winery wastewater to the pilot plant a significant increase in the nitrogen removal was detected, from 58 to 75%. The COD removal was slightly increased, from 89 to 95%, and the phosphorus removal remained constant.

Simultaneous biological nutrient removal: evaluation of autotrophic denitrification, heterotrophic nitrification, and biological phosphorus removal in full-scale systems.

Science.gov (United States)

Littleton, Helen X; Daigger, Glen T; Strom, Peter F; Cowan, Robert A

2003-01-01

Simultaneous biological nutrient removal (SBNR) is the biological removal of nitrogen and phosphorus in excess of that required for biomass synthesis in a biological wastewater treatment system without defined anaerobic or anoxic zones. Evidence is growing that significant SBNR can occur in many systems, including the aerobic zone of systems already configured for biological nutrient removal. Although SBNR systems offer several potential advantages, they cannot be fully realized until the mechanisms responsible for SBNR are better understood. Consequently, a research program was initiated with the basic hypothesis that three mechanisms might be responsible for SBNR: the reactor macroenvironment, the floc microenvironment, and novel microorganisms. Previously, the nutrient removal capabilities of seven full-scale, staged, closed-loop bioreactors known as Orbal oxidation ditches were evaluated. Chemical analysis and microbiological observations suggested that SBNR occurred in these systems. Three of these plants were further examined in this research to evaluate the importance of novel microorganisms, especially for nitrogen removal. A screening tool was developed to determine the relative significance of the activities of microorganisms capable of autotrophic denitrification and heterotrophic nitrification-aerobic denitrification in biological nutrient removal systems. The results indicated that novel microorganisms were not substantial contributors to SBNR in the plants studied. Phosphorus metabolism (anaerobic release, aerobic uptake) was also tested in one of the plants. Activity within the mixed liquor that was consistent with current theories for phosphorus-accumulating organisms (PAOs) was observed. Along with other observations, this suggests the presence of PAOs in the facilities studied.

After-heat removal system

International Nuclear Information System (INIS)

Yamamoto, Michiyoshi; Mitani, Shinji.

1982-01-01

Purpose: To prevent contamination of suppression pool water and intrusion of corrosion products into a nuclear reactor. Constitution: Upon stop of an after-heat removing system, reactor water contained in pipelines is drained out to a radioactive wastes processing facility at the time the cooling operation mode has been completed. At the same time, water is injected from a pure water supply system to the after-heat removing system to discharge corrosion product and activated materials while cleaning the inside of the pipelines. Then, pure water is held in the pipelines and it is discharged again and replaced with pure water before entering the cooling mode operation. Thereafter, the cooling mode operation upon reactor shutdown is performed. (Yoshino, Y.)

A study of emergency American football helmet removal techniques.

Science.gov (United States)

Swartz, Erik E; Mihalik, Jason P; Decoster, Laura C; Hernandez, Adam E

2012-09-01

The purpose was to compare head kinematics between the Eject Helmet Removal System and manual football helmet removal. This quasi-experimental study was conducted in a controlled laboratory setting. Thirty-two certified athletic trainers (sex, 19 male and 13 female; age, 33 ± 10 years; height, 175 ± 12 cm; mass, 86 ± 20 kg) removed a football helmet from a healthy model under 2 conditions: manual helmet removal and Eject system helmet removal. A 6-camera motion capture system recorded 3-dimensional head position. Our outcome measures consisted of the average angular velocity and acceleration of the head in each movement plane (sagittal, frontal, and transverse), the resultant angular velocity and acceleration, and total motion. Paired-samples t tests compared each variable across the 2 techniques. Manual helmet removal elicited greater average angular velocity in the sagittal and transverse planes and greater resultant angular velocity compared with the Eject system. No differences were observed in average angular acceleration in any single plane of movement; however, the resultant angular acceleration was greater during manual helmet removal. The Eject Helmet Removal System induced greater total head motion. Although the Eject system created more motion at the head, removing a helmet manually resulted in more sudden perturbations as identified by resultant velocity and acceleration of the head. The implications of these findings relate to the care of all cervical spine-injured patients in emergency medical settings, particularly in scenarios where helmet removal is necessary. Copyright © 2012 Elsevier Inc. All rights reserved.

Process to remove rare earth from IFR electrolyte

International Nuclear Information System (INIS)

Ackerman, J.P.; Johnson, T.R.

1994-01-01

The invention is a process for the removal of rare earths from molten chloride electrolyte salts used in the reprocessing of integrated fast reactor fuel (IFR). The process can be used either continuously during normal operation of the electrorefiner or as a batch process. The process consists of first separating the actinide values from the salt before purification by removal of the rare earths. After replacement of the actinides removed in the first step, the now-purified salt electrolyte has the same uranium and plutonium concentration and ratio as when the salt was removed from the electrorefiner. 1 fig

Removing Bureaucracy

Science.gov (United States)

2015-08-01

11 Defense AT&L: July–August 2015 Removing Bureaucracy Katharina G. McFarland McFarland is Assistant Secretary of Defense for Acquisition. I once...involvement from all of the Service warfighting areas came together to scrub the program requirements due to concern over the “ bureaucracy ” and... Bureaucracy ” that focuses on reducing cycle time, staffing time and all forms of inefficiencies. This includes review of those burdens that Congress

Efecto determinante de la motivación de viaje sobre la imagen de destino en turistas de ocio a un destino urbano: el caso de Monterrey, México. Una aproximación por medio de mínimos cuadrados parciales (PLS

Directory of Open Access Journals (Sweden)

José T. Olague

2016-06-01

Full Text Available Los turistas urbanos se caracterizan por ser uno de los segmentos de mayor crecimiento en los mercados turísticos actuales. Monterrey (México, uno de los principales destinos   urbanos del país, ha apostado en la actualidad por mejorar su competitividad. Esta investigación se propuso encontrar evidencia acerca de la relación causal de la motivación de viaje sobre la imagen percibida del destino, dos variables importantes por su influencia en la satisfacción de los visitantes. Una revisión de la literatura permitió proponer constructos teóricos integrados en un instrumento para la recogida de datos vía encuesta a una muestra representativa. Por medio del método de regresión y ecuaciones estructurales por mínimos cuadrados parciales (PLS, se identificaron los componentes principales de ambas variables y se obtuvo un modelo explicativo de la imagen percibida del destino en función de la motivación de viaje. Finalmente, se emiten recomendaciones para la gestión del destino urbano en función de los resultados obtenidos.

THE REMOVAL OF GLYPHOSATE FROM DRINKING WATER

Science.gov (United States)

The effectiveness of granulated activated carbon (GAC), packed activated carbon (PAC), conventional treatment, membranes, and oxidation for removing glyphosate from natural waters is evaluated. Results indicate that GAC and PAC are not effective in removing glyphosate, while oxid...

Removal of oil from water by bentonite

International Nuclear Information System (INIS)

Moazed, H.; Viraraghavan, T.

1999-01-01

Many materials, included activated carbon, peat, coal, fiberglass, polypropylene, organoclay and bentonite have been used for removing oils and grease from water. However, bentonite has been used only rarely for this purpose. In this study Na-bentonite was used to remove oil from oil-in-water emulsions of various kinds such as standard mineral oil, cutting oils, refinery effluent and produced water from production wells at Estevan, Saskatchewan. Removal efficiencies obtained were 85 to 96 per cent for cutting oils, 84 to 86 per cent for produced water and 54 to 87 per cent for refinery effluent. Bentonite proved to be more effective in the removal of oil from oil-in-water emulsions than from actual waste waters; up to 96 percent from oil-in-water emulsions to only 87 per cent from actual waste water. The percentage of oil removed was found to be a function of the amount of bentonite added and the adsorption time up to the equilibrium time. Result also showed that the Langmuir, Freundlich and BET isotherms are well suited to describe the adsorption of oil by bentonite from the various oily waters employed in this study. 15 refs

Trunnion Collar Removal Machine - Gap Analysis Table

International Nuclear Information System (INIS)

Johnson, M.

2005-01-01

The purpose of this document is to review the existing the trunnion collar removal machine against the ''Nuclear Safety Design Bases for License Application'' (NSDB) [Ref. 10] requirements and to identify codes and standards and supplemental requirements to meet these requirements. If these codes and standards can not fully meet these requirements then a ''gap'' is identified. These gaps will be identified here and addressed using the ''Trunnion Collar Removal Machine Design Development Plan'' [Ref. 15]. The codes and standards, supplemental requirements, and design development requirements for the trunnion collar removal machine are provided in the gap analysis table (Appendix A, Table 1). Because the trunnion collar removal machine is credited with performing functions important to safety (ITS) in the NSDB [Ref. 10], design basis requirements are applicable to ensure equipment is available and performs required safety functions when needed. The gap analysis table is used to identify design objectives and provide a means to satisfy safety requirements. To ensure that the trunnion collar removal machine performs required safety functions and meets performance criteria, this portion of the gap analysis tables supplies codes and standards sections and the supplemental requirements and identifies design development requirements, if needed

Evaluation of Heat Removal Performance of Passive Decay Heat Removal system for S-CO{sub 2} Cooled Micro Modular Reactor

Energy Technology Data Exchange (ETDEWEB)

Moon, Jangsik; Lee, Jeong Ik; Jeong, Yong Hoon [KAIST, Daejeon (Korea, Republic of)

2015-05-15

The modular systems is able to be transported by large trailer. Moreover, dry cooling system is applied for waste heat removal. The characteristics of MMR takes wide range of construction area from coast to desert, isolated area and disaster area. In MMR, Passive decay heat removal system (PDHRS) is necessary for taking the advantage on selection of construction area where external support cannot be offered. The PDHRS guarantees to protect MMR without external support. In this research, PDHRS of MMR is introduced and decay heat removal performance is analyzed. The PDHRS guarantees integrity of reactor coolant system. The high level of decay heat (2 MW) can be removed by PDHRS without offsite power.

Electrodialytic removal of cadmium from wastewater sludge

DEFF Research Database (Denmark)

Jakobsen, M. R.; Fritt-Rasmussen, Janne; Nielsen, S.

2004-01-01

This paper presents for the first time laboratory results demonstrating electrodialytic removal of Cd from wastewater sludge, which is a method originally developed for soil remediation. During the remediation a stirred suspension of wastewater sludge was exposed to an electric dc field. The liquid....../solid (ml/g fresh sludge) ratio was between 1.4 and 2. Three experiments were performed where the sludge was suspended in distilled water, citric acid or HNO"3. The experimental conditions were otherwise identical. The Cd removal in the three experiments was 69, 70 and 67%, respectively, thus the removal...... was approximately the same. Chemical extraction experiments with acidic solutions showed that 5-10 times more Cd could be extracted from decomposed sludge than from fresh sludge. It is likely that the mobilization of Cd during decomposition of the sludge contributes to the efficient removal of Cd...

Arsenic removal by magnetic nanocrystalline barium hexaferrite

International Nuclear Information System (INIS)

Patel, Hasmukh A.; Byun, Jeehye; Yavuz, Cafer T.

2012-01-01

Nanoscale magnetite (Fe 3 O 4 ) ( 12 O 19 , BHF) is a well-known permanent magnet (i.e., fridge magnets) and attractive due to its low cost in making large quantities. BHF offers a viable alternative to magnetite nanocrystals for arsenic removal since it features surfaces similar to iron oxides but with much enhanced magnetism. Herein, we employ BHF nanocrystalline materials for the first time in arsenic removal from wastewater. Our results show better (75 %) arsenic removal than magnetite of the similar sizes. The BHF nanoparticles, 6.06 ± 0.52 nm synthesized by thermolysis method at 320 °C do not show hexagonal phase, however, subsequent annealing at 750 °C produced pure hexagonal BHF in >200 nm assemblies. By using BHF, we demonstrate that nanoparticle removal is more efficient and fixed bed type cartridge applications are more possible.

Individual and competitive removal of heavy metals using capacitive deionization

International Nuclear Information System (INIS)

Huang, Zhe; Lu, Lu; Cai, Zhenxiao; Ren, Zhiyong Jason

2016-01-01

Highlights: • Capactive deionization can effectively remove cadmium, lead, and chromium from water. • The removal rates of the individual metal ions vary due to adsorption difference. • The interplay between different metal ions when co-present affects ion removal. - Abstract: This study presents the viability and preference of capacitive deionization (CDI) for removing different heavy metal ions in various conditions. The removal performance and mechanisms of three ions, cadmium (Cd"2"+), lead (Pb"2"+) and chromium (Cr"3"+) were investigated individually and as a mixture under different applied voltages and ion concentrations. It was found that CDI could effectively remove these metals, and the performance was positively correlated with the applied voltage. When 1.2 V was applied into solution containing 0.5 mM individual ions, the Cd"2"+, Pb"2"+, and Cr"3"+ removal was 32%, 43%, and 52%, respectively, and the electrosorption played a bigger role in Cd"2"+ removal than for the other two ions. Interestingly, while the removal of Pb"2"+ and Cr"3"+ remained at a similar level of 46% in the mixture of three ions, the Cd"2"+ removal significantly decreased to 14%. Similar patterns were observed when 0.05 mM was used to simulate natural contaminated water condition, but the removal efficiencies were much higher, with the removal of Pb"2"+, Cr"3"+, and Cd"2"+ increased to 81%, 78%, and 42%, respectively. The low valence charge and lack of physical sorption of Cd"2"+ were believed to be the reason for the removal behavior, and advanced microscopic analysis showed clear deposits of metal ions on the cathode surface after operation.

Mercury removal from solid mixed waste

International Nuclear Information System (INIS)

Gates, D.D.; Morrissey, M.; Chava, K.K.; Chao, K.

1994-01-01

The removal of mercury from mixed wastes is an essential step in eliminating the temporary storage of large inventories of mixed waste throughout the Department of Energy (DOE) complex. Currently thermal treatment has been identified as a baseline technology and is being developed as part of the DOE Mixed Waste Integrated Program (MWIP). Since thermal treatment will not be applicable to all mercury containing mixed waste and the removal of mercury prior to thermal treatment may be desirable, laboratory studies have been initiated at Oak Ridge National Laboratory (ORNL) to develop alternative remediation technologies capable of removing mercury from certain mixed waste. This paper describes laboratory investigations of the KI/I 2 leaching processes to determine the applicability of this process to mercury containing solid mixed waste

To remove or not to remove? The challenge of extracting the template to make the cavities available in Molecularly Imprinted Polymers (MIPs).

Science.gov (United States)

Lorenzo, Rosa A; Carro, Antonia M; Alvarez-Lorenzo, Carmen; Concheiro, Angel

2011-01-01

Template removal is a critical step in the preparation of most molecularly imprinted polymers (MIPs). The polymer network itself and the affinity of the imprinted cavities for the template make its removal hard. If there are remaining template molecules in the MIPs, less cavities will be available for rebinding, which decreases efficiency. Furthermore, if template bleeding occurs during analytical applications, errors will arise. Despite the relevance to the MIPs performance, template removal has received scarce attention and is currently the least cost-effective step of the MIP development. Attempts to reach complete template removal may involve the use of too drastic conditions in conventional extraction techniques, resulting in the damage or the collapse of the imprinted cavities. Advances in the extraction techniques in the last decade may provide optimized tools. The aim of this review is to analyze the available data on the efficiency of diverse extraction techniques for template removal, paying attention not only to the removal yield but also to MIPs performance. Such an analysis is expected to be useful for opening a way to rational approaches for template removal (minimizing the costs of solvents and time) instead of the current trial-and-error methods.

28 CFR 36.304 - Removal of barriers.

Science.gov (United States)

2010-07-01

..., vending machines, display racks, and other furniture; (5) Repositioning telephones; (6) Adding raised.... These measures include, for example, removal of obstructing furniture or vending machines, widening of...) General. A public accommodation shall remove architectural barriers in existing facilities, including...

Development and efficacy assessments of tea seed oil makeup remover.

Science.gov (United States)

Parnsamut, N; Kanlayavattanakul, M; Lourith, N

2017-05-01

The efficacy of tea seed oil to clean foundation and eyeliner was evaluated. The safe and efficient tea seed oil makeup remover was developed. In vitro cleansing efficacy of makeup remover was UV-spectrophotometric validated. The stability evaluation by means of accelerated stability test was conducted. In vitro and in vivo cleansing efficacy of the removers was conducted in a comparison with benchmark majorly containing olive oil. Tea seed oil cleaned 90.64±4.56% of foundation and 87.62±8.35% of eyeliner. The stable with most appropriate textures base was incorporated with tea seed oil. Three tea seed oil removers (50, 55 and 60%) were stabled. The 60% tea seed oil remover significantly removed foundation better than others (94.48±3.37%; Pmakeup removers had been developed. The consumers' choices towards the makeup remover containing the bio-oils are widen. In vitro cleansing efficacy during the course of makeup remover development using UV-spectrophotometric method feasible for pharmaceutic industries is encouraged. Copyright © 2016 Académie Nationale de Pharmacie. Published by Elsevier Masson SAS. All rights reserved.

Arsenic Removal and Its Chemistry in Batch Electrocoagulation Studies.

Science.gov (United States)

Sharma, Anshul; Adapureddy, Sri Malini; Goel, Sudha

2014-04-01

The aim of this study was to evaluate the impact of different oxidizing agents like light, aeration (by mixing) and electrocoagulation (EC) on the oxidation of As (III) and its subsequent removal in an EC batch reactor. Arsenic solutions prepared using distilled water and groundwater were evaluated. Optimum pH and the effect of varying initial pH on As removal efficiency were also evaluated. MaximumAs (III) removal efficiency with EC, light and aeration was 97% from distilled water and 71% from groundwater. Other results show that EC alone resulted in 90% As removal efficiency in the absence of light and mixing from distilled water and 53.6% from groundwater. Removal with light and mixing but without EC resulted in only 26% As removal from distilled water and 29% from groundwater proving that electro-oxidation and coagulation were more effective in removing arsenic compared to the other oxidizing agents examined. Initial pH was varied from 5 to 10 in distilled water and from 3 to 12 in groundwater for evaluating arsenic removal efficiency by EC. The optimum initial pH for arsenic removal was 7 for distilled water and groundwater. For all initial pHs tested between 5 and 10 in distilled water, the final pH ranged between 7 and 8 indicating that the EC process tends towards near neutral pH under the conditions examined in this study.

Chronic Diarrhea: A Concern After Gallbladder Removal?

Science.gov (United States)

Chronic diarrhea: A concern after gallbladder removal? I had my gallbladder removed six months ago, and I'm still having diarrhea. Is this ... mild diarrhea after cholecystectomy is not cause for concern, but speak to your doctor if you are ...

Removal of Chromium from Industrial Wastewater Using Silicon Nanoparticle

Directory of Open Access Journals (Sweden)

Laleh Ranandeh Kalankesh

2015-03-01

Full Text Available Hexavalent chromium is a pollutant found in surface and underground waters that causes serious environmental hazards. Chromium enters water as a result of industrial activities such as electroplating, dyeing, leather tanning, and metal manufacturing. The objective of the present laboratory-experimental study was to remove chromate from industrial effluents using silicon nanoparticles. The experiments were performed with both simulated synthetic wastewater and true wastewater. Various parameters such as pH, contact time, and different concentrations of Cr(VI and SiO2 were examined. The data obtained were analyzed using the Excel and SPSS Ver. 16. It was found that Cr(VI removal increased with decreasing pH and increasing contact time. The highest Cr(VI removal was achieved at pH=3 and a contact time of 120 minutes. It was also observed that removal observed to obey the Langmuir isotherm and pseudo second-order kinetic models, respectively. The findings indicate that silicon nanoparticles are capable of removeing Cr(VI from industrial effluents. Given the Cr(VI removal efficiency of 93.6% achieved under optimum conditions and  the removal efficiency of 88.6% achieved in real samples, the method may be recommended as a highly efficient one for removing Cr(VI from industrial wastewaters.

Removal of Strontium from Drinking Water by Conventional ...

Science.gov (United States)

The United States Environmental Protection Agency Contaminant Candidate List 3 lists strontium as a contaminant for potential regulatory consideration in drinking water. There is very little data available on strontium removal from drinking water. As a result, there is an immediate need to perform treatment studies. The objective of this work is to evaluate the effectiveness of conventional and lime-soda ash softening treatments to remove strontium from surface and ground waters. Conventional drinking water treatment with aluminum and iron coagulants were able to achieve 12% and 5.9% strontium removal at best, while lime softening removed as much as 78% from natural strontium-containing ground water. Systematic fundamental experiments showed that strontium removal during the lime-soda ash softening was related to pH, calcium concentration and dissolved inorganic carbon concentration. Final strontium concentration was also directly associated with initial strontium concentration. Precipitated solids showed well-formed crystals or agglomerates of mixed solids, two polymorphs of calcium carbonate (vaterite and calcite), and strontianite, depending on initial water quality conditions. X-ray diffraction analysis suggested that strontium likely replaced calcium inside the crystal lattice and was likely mainly responsible for removal during lime softening. To inform the public.

Dam Removals and River Restoration in International Perspective

Directory of Open Access Journals (Sweden)

Chris S. Sneddon

2017-10-01

Full Text Available In the Anthropocene era, questions over institutions, economics, culture and politics are central to the promotion of water-society relations that enhance biophysical resilience and democratic modes of environmental governance. The removal of dams and weirs from river systems may well signal an important shift in how human actors value and utilize rivers. Yet the removal of water infrastructure is often lengthy, institutionally complex, and characterized by social conflict. This Special Issue draws insights from case studies of recent efforts in North America and Europe to restore river systems through dam and weir removal. These cases include both instances where removal has come to fruition in conjunction with efforts to rehabilitate aquatic systems and instances where removal has been stymied by a constellation of institutional, political and cultural factors. Drawing from diverse theoretical frames and methodological approaches, the authors present novel ways to conceptualize water-society relations using the lens of dam removal and river restoration, as well as crucial reminders of the multiple biophysical and social dimensions of restoration initiatives for water resource practitioners interested in the rehabilitation of socioecological systems.

Clofibric acid and gemfibrozil removal in membrane bioreactors.

Science.gov (United States)

Gutierrez-Macias, Tania; Nacheva, Petia Mijaylova

2015-01-01

The removal of two blood lipid regulators, clofibric acid (CLA) and gemfibrozil (GFZ), was evaluated using two identical aerobic membrane bioreactors with 6.5 L effective volume each. Polysulfone ultrafiltration hollow fiber membranes were submerged in the reactors. Different operating conditions were tested varying the organic load (F/M), hydraulic residence time (HRT), biomass concentration measured as total suspended solids in the mixed liquor (MLTSS) and the sludge retention time (SRT). Complete GFZ removal was obtained with F/M of 0.21-0.48 kg COD kgTSS⁻¹ d⁻¹, HRT of 4-10 hours, SRT of 10-32 d and MLTSS of 6-10 g L⁻¹. The GFZ removal can be attributed to biodegradation and there was no accumulation of the compound in the biomass. The CLA removals improved with the SRT and HRT increase and F/M decrease. Average removals of 78-79% were obtained with SRT 16-32 d, F/M of 0.21-0.34 kgCOD kgTSS⁻¹ d⁻¹, HRT of 7-10 hours and MLTSS of 6-10 g L⁻¹. Biodegradation was found to be the main removal pathway.

Enhanced Biological Phosphorus Removal : Metabolic Insights and Salinity Effects

NARCIS (Netherlands)

Welles, L.

2015-01-01

Enhanced biological phosphorus removal (EBPR) is a biological process for efficient phosphate removal from wastewaters through intracellular storage of polyphosphate by polyphosphate-accumulating organisms (PAO) and subsequent removal of PAO from the system through wastage of sludge. In comparison

Individual and competitive removal of heavy metals using capacitive deionization

Energy Technology Data Exchange (ETDEWEB)

Huang, Zhe; Lu, Lu [Department of Civil, Environmental, and Architectural Engineering, University of Colorado Boulder, Boulder, CO 80309 (United States); Cai, Zhenxiao [Access Business Group LLC, 7575 Fulton Street East, Ada, MI 49301 (United States); Ren, Zhiyong Jason, E-mail: jason.ren@colorado.edu [Department of Civil, Environmental, and Architectural Engineering, University of Colorado Boulder, Boulder, CO 80309 (United States)

2016-01-25

Highlights: • Capactive deionization can effectively remove cadmium, lead, and chromium from water. • The removal rates of the individual metal ions vary due to adsorption difference. • The interplay between different metal ions when co-present affects ion removal. - Abstract: This study presents the viability and preference of capacitive deionization (CDI) for removing different heavy metal ions in various conditions. The removal performance and mechanisms of three ions, cadmium (Cd{sup 2+}), lead (Pb{sup 2+}) and chromium (Cr{sup 3+}) were investigated individually and as a mixture under different applied voltages and ion concentrations. It was found that CDI could effectively remove these metals, and the performance was positively correlated with the applied voltage. When 1.2 V was applied into solution containing 0.5 mM individual ions, the Cd{sup 2+}, Pb{sup 2+}, and Cr{sup 3+} removal was 32%, 43%, and 52%, respectively, and the electrosorption played a bigger role in Cd{sup 2+} removal than for the other two ions. Interestingly, while the removal of Pb{sup 2+} and Cr{sup 3+} remained at a similar level of 46% in the mixture of three ions, the Cd{sup 2+} removal significantly decreased to 14%. Similar patterns were observed when 0.05 mM was used to simulate natural contaminated water condition, but the removal efficiencies were much higher, with the removal of Pb{sup 2+}, Cr{sup 3+}, and Cd{sup 2+} increased to 81%, 78%, and 42%, respectively. The low valence charge and lack of physical sorption of Cd{sup 2+} were believed to be the reason for the removal behavior, and advanced microscopic analysis showed clear deposits of metal ions on the cathode surface after operation.

Soil bacterial community shifts associated with sugarcane straw removal

Science.gov (United States)

Pimentel, Laisa; Gumiere, Thiago; Andreote, Fernando; Cerri, Carlos

2017-04-01

In Brazil, the adoption of the mechanical unburned sugarcane harvest potentially increase the quantity of residue left in the field after harvesting. Economically, this material has a high potential for second generation ethanol (2G) production. However, crop residues have an essential role in diverse properties and processes in the soil. The greater part of the uncertainties about straw removal for 2G ethanol production is based on its effects in soil microbial community. In this sense, it is important to identify the main impacts of sugarcane straw removal on soil microbial community. Therefore, we conducted a field study, during one year, in Valparaíso (São Paulo state - Brazil) to evaluate the effects of straw decomposition on soil bacterial community. Specifically, we wanted: i) to compare the rates of straw removal and ii) to evaluate the effects of straw decomposition on soil bacterial groups over one year. The experiment was in a randomized block design with treatments arranged in strip plot. The treatments are different rates of sugarcane straw removal, namely: no removal, 50, 75 and 100% of straw removal. Soil sampling was carried out at 0, 4, 8 and 12 months after the sugarcane harvest (August 2015). Total DNA was extracted from soil using the PowersoilTM DNA Isolation kit. And the abundance of bacterial in each soil sample was estimated via quantification of 16S rRNA gene. The composition of the bacterial communities was estimated via terminal restriction fragment length polymorphism (T-RFLP) analysis, and the T-RF sizes were performed on a 3500 Genetic Analyzer. Finally, the results were examined with GeneMapper 4.1 software. There was bacterial community shifts through the time and among the rates of sugarcane straw removal. Bacterial community was firstly determined by the time scale, which explained 29.16% of total variation. Rates of straw removal explained 11.55% of shifts on bacterial community. Distribution through the time is an important

Investigations in gallium removal

Energy Technology Data Exchange (ETDEWEB)

Philip, C.V.; Pitt, W.W. [Texas A and M Univ., College Station, TX (United States); Beard, C.A. [Amarillo National Resource Center for Plutonium, TX (United States)

1997-11-01

Gallium present in weapons plutonium must be removed before it can be used for the production of mixed-oxide (MOX) nuclear reactor fuel. The main goal of the preliminary studies conducted at Texas A and M University was to assist in the development of a thermal process to remove gallium from a gallium oxide/plutonium oxide matrix. This effort is being conducted in close consultation with the Los Alamos National Laboratory (LANL) personnel involved in the development of this process for the US Department of Energy (DOE). Simple experiments were performed on gallium oxide, and cerium-oxide/gallium-oxide mixtures, heated to temperatures ranging from 700--900 C in a reducing environment, and a method for collecting the gallium vapors under these conditions was demonstrated.

Investigations in gallium removal

International Nuclear Information System (INIS)

Philip, C.V.; Pitt, W.W.; Beard, C.A.

1997-11-01

Gallium present in weapons plutonium must be removed before it can be used for the production of mixed-oxide (MOX) nuclear reactor fuel. The main goal of the preliminary studies conducted at Texas A and M University was to assist in the development of a thermal process to remove gallium from a gallium oxide/plutonium oxide matrix. This effort is being conducted in close consultation with the Los Alamos National Laboratory (LANL) personnel involved in the development of this process for the US Department of Energy (DOE). Simple experiments were performed on gallium oxide, and cerium-oxide/gallium-oxide mixtures, heated to temperatures ranging from 700--900 C in a reducing environment, and a method for collecting the gallium vapors under these conditions was demonstrated

Lipodistrofia parcial familiar do tipo Dunnigan: atenção ao diagnóstico precoce Dunnigan-type familial partial lipodystrophy: attention to precocious diagnosis

Directory of Open Access Journals (Sweden)

Lenora Maria Camarate Silveira Martins Leão

2011-02-01

Full Text Available A lipodistrofia parcial familiar tipo Dunnigan é uma doença autossômica dominante rara. Em sua forma clássica, é resultante de uma mutação missense heterozigótica no gene LMNA, que codifica a proteína nuclear denominada lâmina tipo A/C. Caracteriza-se pelo desaparecimento progressivo do tecido adiposo subcutâneo nos membros, região glútea, abdome e tronco, que se inicia na puberdade, acompanhado de acúmulo de gordura em outras áreas, como a face, queixo, grandes lábios e região intra-abdominal, conferindo o aspecto de hipertrofia muscular e simulando o fenótipo de síndrome de Cushing. Mulheres afetadas são particularmente predispostas à resistência à insulina e suas complicações, incluindo sinais da síndrome dos ovários policísticos. Com o objetivo de alertar para o diagnóstico precoce, que possibilita a adoção de medidas que minimizam os graves distúrbios metabólicos vinculados à desordem, relatamos o caso de uma paciente em que a investigação foi realizada somente ao final da quinta década de vida. A aparente hipertrofia muscular e o acentuado depósito de gordura nos grandes lábios possibilitam aos médicos ginecologistas a suspeita diagnóstica.Dunnigan-type familial partial lipodystrophy (FPLD is an autosomal dominant disease that results from heterozygous missense mutations in LMNA, the gene that encodes nuclear lamin A/C. FPLD is characterized by a progressive disappearance of subcutaneous adipose tissue in the limbs, gluteal region, abdomen and trunk, beginning at the time of or after puberty, and excessive amount of fat in the face, chin, labia majora, and intra-abdominal region, leading to a Cushingoid appearance and increased muscularity phenotype. Affected women are particularly predisposed to insulin resistance and its complications, including features of polycystic ovary syndrome. To emphasize the importance of an early FPLD diagnosis, which is necessary to prevent serious metabolic

Trace-level mercury removal from surface water

International Nuclear Information System (INIS)

Klasson, K.T.; Bostick, D.T.

1998-01-01

Many sorbents have been developed for the removal of mercury and heavy metals from waters; however, most of the data published thus far do not address the removal of mercury to the target levels represented in this project. The application to which these sorbents are targeted for use is the removal of mercury from microgram-per-liter levels to low nanogram-per-liter levels. Sorbents with thiouronium, thiol, amine, sulfur, and proprietary functional groups were selected for these studies. Mercury was successfully removed from surface water via adsorption onto Ionac SR-4 and Mersorb resins to levels below the target goal of 12 ng/L in batch studies. A thiol-based resin performed the best, indicating that over 200,000 volumes of water could be treated with one volume of resin. The cost of the resin is approximately $0.24 per 1,000 gal of water

Benzotriazole removal on post-Cu CMP cleaning

International Nuclear Information System (INIS)

Tang Jiying; Liu Yuling; Sun Ming; Fan Shiyan; Li Yan

2015-01-01

This work investigates systematically the effect of FA/O II chelating agent and FA/O I surfactant in alkaline cleaning solutions on benzotriazole (BTA) removal during post-Cu CMP cleaning in GLSI under the condition of static etching. The best detergent formulation for BTA removal can be determined by optimization of the experiments of single factor and compound cleaning solution, which has been further confirmed experimentally by contact angle (CA) measurements. The resulting solution with the best formulation has been measured for the actual production line, and the results demonstrate that the obtained cleaning solution can effectively and efficiently remove BTA, CuO and abrasive SiO 2 without basically causing interfacial corrosion. This work demonstrates the possibility of developing a simple, low-cost and environmentally-friendly cleaning solution to effectively solve the issues of BTA removal on post-Cu CMP cleaning in a multi-layered copper wafer. (paper)

Removal of ciprofloxacin from water by birnessite

International Nuclear Information System (INIS)

Jiang, Wei-Teh; Chang, Po-Hsiang; Wang, Ya-Siang; Tsai, Yolin; Jean, Jiin-Shuh; Li, Zhaohui; Krukowski, Keith

2013-01-01

Highlights: ► Ciprofloxacin removal by birnessite was accompanied by interlayer cation exchange. ► Layer expansion and FTIR data suggested ciprofloxacin intercalation into birnessite. ► Adsorption capacity of ciprofloxacin into birnessite was limited by surface area. ► Birnessite in soil systems may provide host for ciprofloxacin accumulation. -- Abstract: With more pharmaceuticals and personal care products detected in the surface and waste waters, studies on interactions between these contaminants and soils or sediments have attracted great attention. In this study, the removal of ciprofloxacin (CIP), a fluoroquinolone antibiotic, by birnessite, a layered manganese oxide, in aqueous solution was investigated by batch studies supplemented by X-ray diffraction (XRD) and Fourier transform infrared analyses. Stoichiometric release of exchangeable cations accompanying CIP removal from water confirmed cation exchange as the major mechanism for CIP uptake by birnessite. Interlayer expansion after CIP adsorption on birnessite as revealed by XRD analyses indicated that intercalation contributed significantly to CIP uptake in addition to external surface adsorption. Correlation of CIP adsorption to specific surface area and cation exchange capacity suggested that the former was the limiting factor for CIP uptake. At the adsorption maximum, CIP molecules formed a monolayer on the birnessite surfaces. The adsorbed CIP could be partially removed using a cationic surfactant at a low initial concentration and mostly removed by AlCl 3 at a higher initial concentration, which further supported the cation exchange mechanism for CIP removal by birnessite. The results indicated that the presence of layered Mn-oxide in the soil and waste water treatment systems may provide host for CIP accumulation

Virus removal efficiency of Cambodian ceramic pot water purifiers.

Science.gov (United States)

Salsali, Hamidreza; McBean, Edward; Brunsting, Joseph

2011-06-01

Virus removal efficiency is described for three types of silver-impregnated, ceramic water filters (CWFs) produced in Cambodia. The tests were completed using freshly scrubbed filters and de-ionized (DI) water as an evaluation of the removal efficiency of the virus in isolation with no other interacting water quality variables. Removal efficiencies between 0.21 and 0.45 log are evidenced, which is significantly lower than results obtained in testing of similar filters by other investigators utilizing surface or rain water and a less frequent cleaning regime. Other experiments generally found virus removal efficiencies greater than 1.0 log. This difference may be because of the association of viruses with suspended solids, and subsequent removal of these solids during filtration. Variability in virus removal efficiencies between pots of the same manufacturer, and observed flow rates outside the manufacturer's specifications, suggest tighter quality control and consistency may be needed during production.

Arsenic removal by nanoparticles: a review.

Science.gov (United States)

Habuda-Stanić, Mirna; Nujić, Marija

2015-06-01

Contamination of natural waters with arsenic, which is both toxic and carcinogenic, is widespread. Among various technologies that have been employed for arsenic removal from water, such as coagulation, filtration, membrane separation, ion exchange, etc., adsorption offers many advantages including simple and stable operation, easy handling of waste, absence of added reagents, compact facilities, and generally lower operation cost, but the need for technological innovation for water purification is gaining attention worldwide. Nanotechnology is considered to play a crucial role in providing clean and affordable water to meet human demands. This review presents an overview of nanoparticles and nanobased adsorbents and its efficiencies in arsenic removal from water. The paper highlights the application of nanomaterials and their properties, mechanisms, and advantages over conventional adsorbents for arsenic removal from contaminated water.

Radon removal from gaseous xenon with activated charcoal

Energy Technology Data Exchange (ETDEWEB)

Abe, K.; Hieda, K.; Hiraide, K.; Hirano, S.; Kishimoto, Y.; Kobayashi, K.; Koshio, Y. [Kamioka Observatory, Institute for Cosmic Ray Research, University of Tokyo, Kamioka, Hida, Gifu 506-1205 (Japan); Liu, J.; Martens, K. [Institute for the Physics and Mathematics of the Universe, University of Tokyo, Kashiwa, Chiba 277-8582 (Japan); Moriyama, S. [Kamioka Observatory, Institute for Cosmic Ray Research, University of Tokyo, Kamioka, Hida, Gifu 506-1205 (Japan); Nakahata, M. [Kamioka Observatory, Institute for Cosmic Ray Research, University of Tokyo, Kamioka, Hida, Gifu 506-1205 (Japan); Institute for the Physics and Mathematics of the Universe, University of Tokyo, Kashiwa, Chiba 277-8582 (Japan); Nishiie, H.; Ogawa, H.; Sekiya, H.; Shinozaki, A. [Kamioka Observatory, Institute for Cosmic Ray Research, University of Tokyo, Kamioka, Hida, Gifu 506-1205 (Japan); Suzuki, Y. [Kamioka Observatory, Institute for Cosmic Ray Research, University of Tokyo, Kamioka, Hida, Gifu 506-1205 (Japan); Institute for the Physics and Mathematics of the Universe, University of Tokyo, Kashiwa, Chiba 277-8582 (Japan); Takachio, O.; Takeda, A.; Ueshima, K.; Umemoto, D. [Kamioka Observatory, Institute for Cosmic Ray Research, University of Tokyo, Kamioka, Hida, Gifu 506-1205 (Japan); and others

2012-01-01

Many low background experiments using xenon need to remove radioactive radon to improve their sensitivities. However, no method of continually removing radon from xenon has been described in the literature. We studied a method to remove radon from xenon gas through an activated charcoal trap. From our measurements we infer a linear relationship between the mean propagation velocity v{sub Rn} of radon and v{sub Xe} of xenon in the trap with v{sub Rn}/v{sub Xe}=(0.96{+-}0.10) Multiplication-Sign 10{sup -3} at -85 Degree-Sign C. As the mechanism for radon removal in this charcoal trap is its decay, knowledge of this parameter allows us to design an efficient radon removal system for the XMASS experiment. The verification of this system found that it reduces radon by a factor of 0.07, which is in line with its expected average retention time of 14.8 days for radon.

Firefighter Down! How to Rapidly Remove Turnout Gear.

Science.gov (United States)

ALexander, John G

2016-04-01

The rescue of an injured colleague--and probably a good friend--is an emotionally charged event. A common initial response could be to remove everything as quickly as possible. Keep in mind that we have accepted practices for the removal of motorcycle equipment and football gear. There are also procedures for removing a patient from a vehicle or swimming pool. These all exist to protect a patient from further injury. We now have established practices for removing a firefighter from a window, or down a ladder. Why then do the procedures stop? Once a firefighter is rescued from a hot zone, he deserves the same level of consideration a football player, motorcycle rider or any other patient receives. We should not be in such a hurry that we don't care how we remove a protective ensemble. The injured firefighter deserves a system, or a procedure, that may be practiced by others and reduce the chance of further injury during

Removal of gasoline vapors from air streams by biofiltration

Energy Technology Data Exchange (ETDEWEB)

Apel, W.A.; Kant, W.D.; Colwell, F.S.; Singleton, B.; Lee, B.D.; Andrews, G.F.; Espinosa, A.M.; Johnson, E.G.

1993-03-01

Research was performed to develop a biofilter for the biodegradation of gasoline vapors. The overall goal of this effort was to provide information necessary for the design, construction, and operation of a commercial gasoline vapor biofilter. Experimental results indicated that relatively high amounts of gasoline vapor adsorption occur during initial exposure of the biofilter bed medium to gasoline vapors. Biological removal occurs over a 22 to 40{degrees}C temperature range with removal being completely inhibited at 54{degrees}C. The addition of fertilizer to the relatively fresh bed medium used did not increase the rates of gasoline removal in short term experiments. Microbiological analyses indicated that high levels of gasoline degrading microbes are naturally present in the bed medium and that additional inoculation with hydrocarbon degrading cultures does not appreciably increase gasoline removal rates. At lower gasoline concentrations, the vapor removal rates were considerably lower than those at higher gasoline concentrations. This implies that system designs facilitating gasoline transport to the micro-organisms could substantially increase gasoline removal rates at lower gasoline vapor concentrations. Test results from a field scale prototype biofiltration system showed volumetric productivity (i.e., average rate of gasoline degradation per unit bed volume) values that were consistent with those obtained with laboratory column biofilters at similar inlet gasoline concentrations. In addition, total benzene, toluene, ethyl-benzene, and xylene (BTEX) removal over the operating conditions employed was 50 to 55%. Removal of benzene was approximately 10 to 15% and removal of the other members of the BTEX group was much higher, typically >80%.

Removal of gasoline vapors from air streams by biofiltration

Energy Technology Data Exchange (ETDEWEB)

Apel, W.A.; Kant, W.D.; Colwell, F.S.; Singleton, B.; Lee, B.D.; Andrews, G.F.; Espinosa, A.M.; Johnson, E.G.

1993-03-01

Research was performed to develop a biofilter for the biodegradation of gasoline vapors. The overall goal of this effort was to provide information necessary for the design, construction, and operation of a commercial gasoline vapor biofilter. Experimental results indicated that relatively high amounts of gasoline vapor adsorption occur during initial exposure of the biofilter bed medium to gasoline vapors. Biological removal occurs over a 22 to 40[degrees]C temperature range with removal being completely inhibited at 54[degrees]C. The addition of fertilizer to the relatively fresh bed medium used did not increase the rates of gasoline removal in short term experiments. Microbiological analyses indicated that high levels of gasoline degrading microbes are naturally present in the bed medium and that additional inoculation with hydrocarbon degrading cultures does not appreciably increase gasoline removal rates. At lower gasoline concentrations, the vapor removal rates were considerably lower than those at higher gasoline concentrations. This implies that system designs facilitating gasoline transport to the micro-organisms could substantially increase gasoline removal rates at lower gasoline vapor concentrations. Test results from a field scale prototype biofiltration system showed volumetric productivity (i.e., average rate of gasoline degradation per unit bed volume) values that were consistent with those obtained with laboratory column biofilters at similar inlet gasoline concentrations. In addition, total benzene, toluene, ethyl-benzene, and xylene (BTEX) removal over the operating conditions employed was 50 to 55%. Removal of benzene was approximately 10 to 15% and removal of the other members of the BTEX group was much higher, typically >80%.

Spontaneous resolution of macular edema after silicone oil removal

Directory of Open Access Journals (Sweden)

Eyyup Karahan

2014-12-01

Full Text Available AIM:To investigate the macular changes in eyes filled with silicone oil (SO and course of these changes after SO removal.METHODS:A retrospective optical coherence tomography scan review was conducted for twenty-four patients who underwent uncomplicated pars plana vitrectomy with SO tamponade for complex retinal detachments were detected with optical coherence tomography before, and one week, one month and three months after SO removal.RESULTS:Mean duration of SO tamponade was 3.6±1.0mo (range:3-7mo. Cystoid macular edema (CME was detected in 3 eyes before SO removal. Submacular fluid was represented in 1 eye before silicone SO removal. Resolution of CME and submacular fluid was achieved 1mo after SO removal in all eyes. Mean best corrected visual acuity (BCVA was 1.15±0.65 (range, hand movement to 0.2 before SO removal in the eyes without macular changes. After SO removal, the mean BCVA values at 1wk and 1 and 3mo, and 0.82±0.23, 0.76±0.21, and 0.70±0.19, all of which were significantly better than baseline (P=0.030, 0.017, 0.006 respectively. In the eyes with macular CME and subretinal fluid the mean BCVA was significantly improved at 3mo after SO removal compared with baseline (P=0.037.CONCLUSION:Decreased visual acuity in eyes filled with SO could be caused by macular complications due to SO. CME and subretinal fluid may resolve without any additional macular surgery after SO removal.

8 CFR 208.16 - Withholding of removal under section 241(b)(3)(B) of the Act and withholding of removal under the...

Science.gov (United States)

2010-01-01

... exclusion, deportation, or removal of an alien to a country where the alien's life or freedom would be... withholding of removal under section 241(b)(3) of the Act to establish that his or her life or freedom would be threatened in the proposed country of removal on account of race, religion, nationality...

Nitrate Removal from Ground Water: A Review

Directory of Open Access Journals (Sweden)

Archna

2012-01-01

Full Text Available Nitrate contamination of ground water resources has increased in Asia, Europe, United States, and various other parts of the world. This trend has raised concern as nitrates cause methemoglobinemia and cancer. Several treatment processes can remove nitrates from water with varying degrees of efficiency, cost, and ease of operation. Available technical data, experience, and economics indicate that biological denitrification is more acceptable for nitrate removal than reverse osmosis and ion exchange. This paper reviews the developments in the field of nitrate removal processes which can be effectively used for denitrifying ground water as well as industrial water.

Method and composition for removing iodine from gases

International Nuclear Information System (INIS)

French, J.A.; O'Hara, D.K.; Pasha, M.

1980-01-01

A method and composition for removing iodine and organic iodides from an iodine-containing off-gas stream is provided. The composition for the removal is a ceramic material impregnated with a mixture of a metallic salt with a water-soluble secondary amine. The method for removing the iodine and iodide is accomplished by passing the off-gas stream over the ceramic impregnated with the metallic salt-amine mixture

Cadmium (II) removal mechanisms in microbial electrolysis cells

Energy Technology Data Exchange (ETDEWEB)

Colantonio, Natalie; Kim, Younggy, E-mail: younggy@mcmaster.ca

2016-07-05

Highlights: • Rapid removal of Cd(II) was achieved in 24 h using microbial electrolysis cells. • Cathodic reduction (electrodeposition) of Cd(II) cannot explain the rapid removal. • H{sub 2} evolution in microbial electrolysis cells increases local pH near the cathode. • High local pH induces Cd(OH){sub 2} and CdCO{sub 3} precipitation only with electric current. • Neutral pH caused by low current and depleted substrate dissolves the precipitated Cd. - Abstract: Cadmium is a toxic heavy metal, causing serious environmental and human health problems. Conventional methods for removing cadmium from wastewater are expensive and inefficient for low concentrations. Microbial electrolysis cells (MECs) can simultaneously treat wastewater, produce hydrogen gas, and remove heavy metals with low energy requirements. Lab-scale MECs were operated to remove cadmium under various electric conditions: applied voltages of 0.4, 0.6, 0.8, and 1.0 V; and a fixed cathode potential of −1.0 V vs. Ag/AgCl. Regardless of the electric condition, rapid removal of cadmium was demonstrated (50–67% in 24 h); however, cadmium concentration in solution increased after the electric current dropped with depleted organic substrate under applied voltage conditions. For the fixed cathode potential, the electric current was maintained even after substrate depletion and thus cadmium concentration did not increase. These results can be explained by three different removal mechanisms: cathodic reduction; Cd(OH){sub 2} precipitation; and CdCO{sub 3} precipitation. When the current decreased with depleted substrates, local pH at the cathode was no longer high due to slowed hydrogen evolution reaction (2H{sup +} + 2e{sup −} → H{sub 2}); thus, the precipitated Cd(OH){sub 2} and CdCO{sub 3} started dissolving. To prevent their dissolution, sufficient organic substrates should be provided when MECs are used for cadmium removal.

Low Temperature Catalyst for NH3 Removal

Science.gov (United States)

Monje, Oscar; Melendez, Orlando

2013-01-01

Air revitalization technologies maintain a safe atmosphere inside spacecraft by the removal of C02, ammonia (NH3), and trace contaminants. NH3 onboard the International Space Station (ISS) is produced by crew metabolism, payloads, or during an accidental release of thermal control refrigerant. Currently, the ISS relies on removing NH3 via humidity condensate and the crew wears hooded respirators during emergencies. A different approach to cabin NH3 removal is to use selective catalytic oxidation (SCO), which builds on thermal catalytic oxidation concepts that could be incorporated into the existing TCCS process equipment architecture on ISS. A low temperature platinum-based catalyst (LTP-Catalyst) developed at KSC was used for converting NH3 to H20 and N2 gas by SCO. The challenge of implementing SCO is to reduce formation of undesirable byproducts like NOx (N20 and NO). Gas mixture analysis was conducted using FTIR spectrometry in the Regenerable VOC Control System (RVCS) Testbed. The RVCS was modified by adding a 66 L semi-sealed chamber, and a custom NH3 generator. The effect of temperature on NH3 removal using the LTP-Catalyst was examined. A suitable temperature was found where NH3 removal did not produce toxic NO, (NO, N02) and N20 formation was reduced.

241-AZ-101 pump removal trough analysis

International Nuclear Information System (INIS)

Coverdell, B.L.

1995-01-01

As part of the current Hanford mission of environmental cleanup, various long length equipment must be removed from highly radioactive waste tanks. The removal of equipment will utilize portions of the Equipment Removal System for Project W320 (ERS-W320), specifically the 50 ton hydraulic trailer system. Because the ERS-W320 system was designed to accommodate much heavier equipment it is adequate to support the dead weight of the trough, carriage and related equipment for 241AZ101 pump removal project. However, the ERS-W320 components when combined with the trough and its' related components must also be analyzed for overturning due to wind loads. Two troughs were designed, one for the 20 in. diameter carriage and one for the 36 in. diameter carriage. A proposed 52 in. trough was not designed and, therefore is not included in this document. In order to fit in the ERS-W320 strongback the troughs were design with the same widths. Structurally, the only difference between the two troughs is that more material was removed from the stiffener plates on the 36 in trough. The reduction in stiffener plate material reduces the allowable load. Therefore, only the 36 in. trough was analyzed

Space Debris Removal: A Game Theoretic Analysis

Directory of Open Access Journals (Sweden)

Richard Klima

2016-08-01

Full Text Available We analyse active space debris removal efforts from a strategic, game-theoretical perspective. Space debris is non-manoeuvrable, human-made objects orbiting Earth, which pose a significant threat to operational spacecraft. Active debris removal missions have been considered and investigated by different space agencies with the goal to protect valuable assets present in strategic orbital environments. An active debris removal mission is costly, but has a positive effect for all satellites in the same orbital band. This leads to a dilemma: each agency is faced with the choice between the individually costly action of debris removal, which has a positive impact on all players; or wait and hope that others jump in and do the ‘dirty’ work. The risk of the latter action is that, if everyone waits, the joint outcome will be catastrophic, leading to what in game theory is referred to as the ‘tragedy of the commons’. We introduce and thoroughly analyse this dilemma using empirical game theory and a space debris simulator. We consider two- and three-player settings, investigate the strategic properties and equilibria of the game and find that the cost/benefit ratio of debris removal strongly affects the game dynamics.

A Fully Customized Baseline Removal Framework for Spectroscopic Applications.

Science.gov (United States)

Giguere, Stephen; Boucher, Thomas; Carey, C J; Mahadevan, Sridhar; Dyar, M Darby

2017-07-01

The task of proper baseline or continuum removal is common to nearly all types of spectroscopy. Its goal is to remove any portion of a signal that is irrelevant to features of interest while preserving any predictive information. Despite the importance of baseline removal, median or guessed default parameters are commonly employed, often using commercially available software supplied with instruments. Several published baseline removal algorithms have been shown to be useful for particular spectroscopic applications but their generalizability is ambiguous. The new Custom Baseline Removal (Custom BLR) method presented here generalizes the problem of baseline removal by combining operations from previously proposed methods to synthesize new correction algorithms. It creates novel methods for each technique, application, and training set, discovering new algorithms that maximize the predictive accuracy of the resulting spectroscopic models. In most cases, these learned methods either match or improve on the performance of the best alternative. Examples of these advantages are shown for three different scenarios: quantification of components in near-infrared spectra of corn and laser-induced breakdown spectroscopy data of rocks, and classification/matching of minerals using Raman spectroscopy. Software to implement this optimization is available from the authors. By removing subjectivity from this commonly encountered task, Custom BLR is a significant step toward completely automatic and general baseline removal in spectroscopic and other applications.

Removable Thin Films used for the Abatement and Mitigation of Beryllium

International Nuclear Information System (INIS)

Lumia, M.; Gentile, C.; Creek, K.; Sandoval, R.

2003-01-01

The use of removable thin films for the abatement of hazardous particulates has many advantages. Removable thin films are designed to trap and fix particulates in the film's matrix by adhesion. Thin films can be applied to an existing contaminated area to fix and capture the particulates for removal. The nature of the removable thin films, after sufficient cure time, is such that it can typically be removed as one continuous entity. The removable thin films can be applied to almost any surface type with a high success rate of removal

Removal of high-molecular weight polycyclic aromatic hydrocarbons

Directory of Open Access Journals (Sweden)

Ulrich Vasconcelos

2011-01-01

Full Text Available Alternatives for the removal of high-molecular weight polycyclic aromatic hydrocarbons (HWM-PAH from soil were tested by adding fertilizer or glycerol, as well as the combination of both. Experiments were carried out for 60 days in reactors containing a HWM-PAH-contaminated soil (8030 μg kg-1, accompanied by pH monitoring, humidity control and quantification of total heterotrophic bacteria and total fungus. Fertilizer addition removed 41.6% of HWM-PAH. Fertilizer and glycerol in combination removed 46.2%. When glycerol was added individually, degradation reached 50.4%. Glycerol also promoted the increase of degradation rate during the first 30 days suggesting the HMW-PAH removal occurred through cometabolic pathways.

Active Debris Removal and the Challenges for Environment Remediation

Science.gov (United States)

Liou, J. C.

2012-01-01

Recent modeling studies on the instability of the debris population in the low Earth orbit (LEO) region and the collision between Iridium 33 and Cosmos 2251 have underlined the need for active debris removal. A 2009 analysis by the NASA Orbital Debris Program Office shows that, in order to maintain the LEO debris population at a constant level for the next 200 years, an active debris removal of about five objects per year is needed. The targets identified for removal are those with the highest mass and collision probability products in the environment. Many of these objects are spent upper stages with masses ranging from 1 to more than 8 metric tons, residing in several altitude regions and concentrated in about 7 inclination bands. To remove five of those objects on a yearly basis, in a cost-effective manner, represents many challenges in technology development, engineering, and operations. This paper outlines the fundamental rationale for considering active debris removal and addresses the two possible objectives of the operations -- removing large debris to stabilize the environment and removing small debris to reduce the threat to operational spacecraft. Technological and engineering challenges associated with the two different objectives are also discussed.

Indicadores para estimativa da digestibilidade parcial em bovinos Markers for measurements of partial digestion in cattle

Directory of Open Access Journals (Sweden)

Marcia Dias

2007-06-01

Full Text Available Objetivou-se avaliar a digestibilidade intestinal da FDN estimada por diferentes indicadores e o efeito das amostras coletadas no período diurno ou diário sobre a digestibilidade desse nutriente. Utilizaram-se quatro novilhas Holandês-Zebu, fistuladas no rúmen e no íleo, mantidas em regime de confinamento com dieta à base de feno de capim-tifton (Cynodon spp., oferecido ad libitum, e 1 kg de concentrado (27% PB. O experimento durou 60 dias divididos em três períodos de 15 dias. A adaptação à dieta experimental foi de sete dias e, entre os períodos, respeitou-se um intervalo de quatro dias. No 1º, 7º e 13º dias de cada período experimental, realizou-se coleta total de fezes; do 2º ao 4º dia, coleta de amostra de digesta omasal e, do 8º ao 10º dia, amostras de digesta ileal. Para a mensuração do fluxo de digesta omasal, foram utilizados os sistemas de indicadores único e duplo. No sistema único, foram comparados a fibra em detergente neutro indigestível (FDNi, a fibra em detergente ácido indigestível (FDAi e o óxido crômico (Cr2O3. No sistema duplo, foram comparadas as associações entre o complexo de cobalto-ácido etilenodiaminotetracético (Co-EDTA com a FDNi (Co-FDNi e a FDAi (Co-FDAi. Para estimativa do fluxo ileal, foram utilizados apenas os indicadores únicos. Não foi verificada diferença significativa entre as amostras de digesta coletadas apenas no período diurno e aquelas coletadas no período diário, portanto, a digestibilidade pode ser estimada com coleta de amostras realizadas apenas no período diurno. Embora a FDNi, a FDAi e o Co-FDAi possam ser utilizados na estimativa de parâmetros de digestibilidade parcial na coleta de digesta omasal, recomenda-se o uso das fibras indigestíveis por serem menos onerosas e de melhor manipulação.The objective of this trial was to investigate the intestinal digestion of neutral detergent fiber (NDF using different markers and the effect of sampling collection

New atraumatic easy removal technique for permanently cemented crown

Directory of Open Access Journals (Sweden)

Pravinkumar G Patil

2012-01-01

Full Text Available Removal of a permanently cemented crown or fixed partial denture is a cumbersome procedure for a prosthodontist, especially when there is no purchase point available to remove it. The technique described in this article consists of sectioning of a crown on facial surface followed by removal of the crown with orthodontic plier. This technique does not damage the gingival/periodontal tissues or underlying tooth structure as the crown need not to be removed with jerky back-action force.

Bridge removal plan requirements.

Science.gov (United States)

2011-04-15

This report provides resources that detail specifications and guidelines related to bridge removal plans across the : United States. We have organized the information into three sections: : ! National Guidance : Includes language from AASHTO specific...

Iodine removal from a gas phase

International Nuclear Information System (INIS)

Vikis, A. Ch.

1982-01-01

Iodine, e.g. radioactive iodine, present as one or more organic iodides, optionally with elemental iodine, in a gas phase (e.g. air) are removed by photochemically decomposing the organic iodides to elemental iodine, reacting the iodine produced, and any initially present with excess ozone, preferably photochemically produced in situ in the gas phase to produce solid iodine oxides, and removing the solid oxides from the gas phase. (author)

Iodine removal from a gas phase

International Nuclear Information System (INIS)

Vikis, A.C.

1984-01-01

Iodine, e.g. radioactive iodine, present as one or more organic iodides, optionally with elemental iodine, in a gas phase (e.g. air) are removed by photochemically decomposing the organic iodides to elemental iodine, reacting the iodine produced, and any initially present with excess ozone, preferably photochemically produced in situ in the gas phase to produce solid iodine oxides, and removing the solid oxides from the gas phase

Newer Trends in Laser Tattoo Removal

Science.gov (United States)

Shah, Swapnil D; Aurangabadkar, Sanjeev J

2015-01-01

Q switched lasers are the current gold standard for laser tattoo removal. Though these systems are generally quite effective in clearing tattoos & have an established safety record, certain limitations exist while following the standard protocol. To overcome these limitation newer techniques such as multipass method, combination treatments with chemical agent and other laser have been introduced. These methods help in faster, less painful and complication free tattoo removal. PMID:25949019

Newer trends in laser tattoo removal

Directory of Open Access Journals (Sweden)

Swapnil D Shah

2015-01-01

Full Text Available Q switched lasers are the current gold standard for laser tattoo removal. Though these systems are generally quite effective in clearing tattoos & have an established safety record, certain limitations exist while following the standard protocol. To overcome these limitation newer techniques such as multipass method, combination treatments with chemical agent and other laser have been introduced. These methods help in faster, less painful and complication free tattoo removal.

Sodium removal, storage, and requalification of components

International Nuclear Information System (INIS)

Gallegos, A.; Shimazaki, T.; Oliva, R.M.

1974-01-01

The objectives of this program are to devise, develop, test, and evaluate techniques for sodium removal and storage of test specimens and components, and to expand and refine, by test and analysis, the sodium removal and storage techniques and procedures for use in processing typical LMFBR components

40 CFR 194.46 - Removal of waste.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Removal of waste. 194.46 Section 194... PROGRAMS CRITERIA FOR THE CERTIFICATION AND RE-CERTIFICATION OF THE WASTE ISOLATION PILOT PLANT'S... Assurance Requirements § 194.46 Removal of waste. Any compliance application shall include documentation...

27 CFR 25.192 - Removal of sour or damaged beer.

Science.gov (United States)

2010-04-01

... beer. 25.192 Section 25.192 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Removals Without Payment of Tax Removal of Beer Unfit for Beverage Use § 25.192 Removal of sour or damaged beer. (a) Containers. The brewer shall remove sour or...

Aqueous phosphate removal using nanoscale zero-valent iron

International Nuclear Information System (INIS)

Almeelbi, Talal; Bezbaruah, Achintya

2012-01-01

Nanoscale zero-valent iron (NZVI) particles have been used for the remediation of a wide variety of contaminants. NZVI particles have high reactivity because of high reactive surface area. In this study, NZVI slurry was successfully used for phosphate removal and recovery. Batch studies conducted using different concentrations of phosphate (1, 5, and 10 mg PO 4 3− -P/L with 400 mg NZVI/L) removed ∼96 to 100 % phosphate in 30 min. Efficacy of the NZVI in phosphate removal was found to 13.9 times higher than micro-ZVI (MZVI) particles with same NZVI and MZVI surface area concentrations used in batch reactors. Ionic strength, sulfate, nitrate, and humic substances present in the water affected in phosphate removal by NZVI but they may not have any practical significance in phosphate removal in the field. Phosphate recovery batch study indicated that better recovery is achieved at higher pH and it decreased with lowering of the pH of the aqueous solution. Maximum phosphate recovery of ∼78 % was achieved in 30 min at pH 12. The successful rapid removal of phosphate by NZVI from aqueous solution is expected to have great ramification for cleaning up nutrient rich waters.

Effect of ferrate on green algae removal.

Science.gov (United States)

Kubiňáková, Emília; Híveš, Ján; Gál, Miroslav; Fašková, Andrea

2017-09-01

Green algae Cladophora aegagropila, present in cooling water of thermal power plants, causes many problems and complications, especially during summer. However, algae and its metabolites are rarely eliminated by common removal methods. In this work, the elimination efficiency of electrochemically prepared potassium ferrate(VI) on algae from cooling water was investigated. The influence of experimental parameters, such as Fe(VI) dosage, application time, pH of the system, temperature and hydrodynamics of the solution on removal efficiency, was optimized. This study demonstrates that algae C. aegagropila can be effectively removed from cooling water by ferrate. Application of ferrate(VI) at the optimized dosage and under the suitable conditions (temperature, pH) leads to 100% removal of green algae Cladophora from the system. Environmentally friendly reduction products (Fe(III)) and coagulation properties favour the application of ferrate for the treatment of water contaminated with studied microorganisms compared to other methods such as chlorination and use of permanganate, where harmful products are produced.

Benzotriazole removal on post-Cu CMP cleaning

Science.gov (United States)

Jiying, Tang; Yuling, Liu; Ming, Sun; Shiyan, Fan; Yan, Li

2015-06-01

This work investigates systematically the effect of FA/O II chelating agent and FA/O I surfactant in alkaline cleaning solutions on benzotriazole (BTA) removal during post-Cu CMP cleaning in GLSI under the condition of static etching. The best detergent formulation for BTA removal can be determined by optimization of the experiments of single factor and compound cleaning solution, which has been further confirmed experimentally by contact angle (CA) measurements. The resulting solution with the best formulation has been measured for the actual production line, and the results demonstrate that the obtained cleaning solution can effectively and efficiently remove BTA, CuO and abrasive SiO2 without basically causing interfacial corrosion. This work demonstrates the possibility of developing a simple, low-cost and environmentally-friendly cleaning solution to effectively solve the issues of BTA removal on post-Cu CMP cleaning in a multi-layered copper wafer. Project supported by the Major National Science and Technology Special Projects (No. 2009ZX02308).

THE EFFECT OF PH, PHOSPHATE AND OXIDANT TYPE ON THE REMOVAL OF ARSENIC FROM DRINKING WATER DURING IRON REMOVAL

Science.gov (United States)

In many regions of the United States, groundwaters that contain arsenic (primarily As[III]) also contain significant amounts of iron (Fe[II]). Arsenic removal will most likely be achieved by iron removal in many of those cases which will consist of oxidization followed by filtra...

Usefulness of a clinical scoring system to anticipate difficulty of Norplant removal.

Science.gov (United States)

Blumenthal, P D; Remsburg, R E; Glew, G; McGrath, J A; Gaffikin, L

1995-12-01

Removal of contraceptive implants (e.g. Norplant) is an issue affecting its worldwide acceptability. Reports of difficult, painful removals have resulted in lawsuits and reduced demand. To improve quality of care, we developed a scoring system to anticipate difficult removals. We report on the usefulness of such a system and present client perspectives about the removal experience. A 9-point scoring system based on the visibility, arrangement, and position (VAP) of Norplant capsules was used to assess the anticipated difficulty of removal in 53 consecutive patients. The VAP score was then correlated with removal time and related parameters. Mean removal time was 14.74 min (range 4.75-47). In 20% of patients, the VAP score indicated a potentially difficult removal and the VAP score correlated significantly with removal time (r = 0.3, p = 0.05). Patients expected removal to be moderately difficult (mean visual analog score 4.7 out of a possible 10), but after removal they rated the actual removal experience as relatively easy (mean score 2.6/10). Before the removal, only 48% of patients said they would recommend Norplant to a friend but after removal, 70% said they would do so. A scoring system such as the VAP score can help identify potentially difficult removals so that an experienced remover can be present at the time of removal or an appropriate referral made. However, the VAP score cannot predict variables such as the density of the subcutaneous fibrous tissue "envelope". Although patient anxiety concerning removal may be high, the presence of a competent remover and an easy removal experience reduces this anxiety and encourages patients to be more positive about this method. The value of having properly trained, competent personnel available to perform removals cannot be over-emphasized.

Laparoscopic Spleen Removal (Splenectomy)

Science.gov (United States)

... Affairs and Humanitarian Efforts Login Laparoscopic Spleen Removal (Splenectomy) Patient Information from SAGES Download PDF Find a ... are suspected. What are the Advantages of Laparoscopic Splenectomy? Individual results may vary depending on your overall ...

Measures for removing hydrogen

International Nuclear Information System (INIS)

Baukal, W.; Koehling, A.; Langer, G.; Poeschel, E.

1984-01-01

Basis for the investigation is a 1300-MW-PWR. The evolution of hydrogen was studied in design-basis and three hypothetical accident scenarios, the loss-of-coolant accident, the failure of emergency cooling system and core meltdown. It was shown that in the case of release rates of 4m 3 H 2 /h, the known post-accident hydrogen removal systems can be used and at medium rates up to 80 m 3 H 2 /h recombines of nuclear and non-nuclear industries are suitable under certain conditions. In the case of larger release rates it appears useful to apply a small recombiner of the type of the post-accident hydrogen removal system combined with an other hydrogen countermeasures. Recommendations are being made for the installation of an accident-proof hydrogen measuring system. (DG) [de

Pharmaceutical removal during managed aquifer recharge with pretreatment by advanced oxidation

KAUST Repository

Lekkerkerker-Teunissen, Karin

2012-10-01

Organic micropollutants (OMPs) are detected in sources for drinking water and treatment possibilities are investigated. Innovative removal technologies are available such as membrane filtration and advanced oxidation, but also biological treatment should be considered. By combining an advanced oxidation process with managed aquifer recharge (MAR), two complementary processes are expected to provide a hybrid system for OMP removal, according to the multiple barrier approach. Laboratory scale batch reactor experiments were conducted to investigate the removal of dissolved organic carbon (DOC) and 14 different pharmaceutically active compounds (PhACs) from MAR influent water and water subjected to oxidation, under different process conditions. A DOC removal of 10% was found in water under oxic (aerobic) conditions for batch reactor experiments, a similar value for DOC removal was observed in the field. Batch reactor experiments for the removal of PhACs showed that the removal of pharmaceuticals ranged from negligible to more than 90%. Under oxic conditions, seven out of 14 pharmaceuticals were removed over 90% and 12 out of 14 pharmaceuticals were removed at more than 50% during 30 days of experiments. Under anoxic conditions, four out of 14 pharmaceuticals were removed over 90% and eight out of 14 pharmaceuticals were removed at more than 50% over 30 days\\' experiments. Carbamazepine and phenazone were persistent both under oxic and anoxic conditions. The PhACs removal efficiency with oxidized water was, for most compounds, comparable to the removal with MAR influent water. Copyright © IWA Publishing 2012.

Pharmaceutical removal during managed aquifer recharge with pretreatment by advanced oxidation

KAUST Repository

Lekkerkerker-Teunissen, Karin; Chekol, E. T.; Maeng, Sungkyu; Ghebremichael, Kebreab A.; Houtman, Corine J.; Verliefde, Arne R. D.; Verberk, J. Q J C; Amy, Gary L.; Van Dijk, Johannis C.

2012-01-01

Organic micropollutants (OMPs) are detected in sources for drinking water and treatment possibilities are investigated. Innovative removal technologies are available such as membrane filtration and advanced oxidation, but also biological treatment should be considered. By combining an advanced oxidation process with managed aquifer recharge (MAR), two complementary processes are expected to provide a hybrid system for OMP removal, according to the multiple barrier approach. Laboratory scale batch reactor experiments were conducted to investigate the removal of dissolved organic carbon (DOC) and 14 different pharmaceutically active compounds (PhACs) from MAR influent water and water subjected to oxidation, under different process conditions. A DOC removal of 10% was found in water under oxic (aerobic) conditions for batch reactor experiments, a similar value for DOC removal was observed in the field. Batch reactor experiments for the removal of PhACs showed that the removal of pharmaceuticals ranged from negligible to more than 90%. Under oxic conditions, seven out of 14 pharmaceuticals were removed over 90% and 12 out of 14 pharmaceuticals were removed at more than 50% during 30 days of experiments. Under anoxic conditions, four out of 14 pharmaceuticals were removed over 90% and eight out of 14 pharmaceuticals were removed at more than 50% over 30 days' experiments. Carbamazepine and phenazone were persistent both under oxic and anoxic conditions. The PhACs removal efficiency with oxidized water was, for most compounds, comparable to the removal with MAR influent water. Copyright © IWA Publishing 2012.

A Multi-Factor Analysis of Sustainable Agricultural Residue Removal Potential

Energy Technology Data Exchange (ETDEWEB)

Jared Abodeely; David Muth; Paul Adler; Eleanor Campbell; Kenneth Mark Bryden

2012-10-01

Agricultural residues have significant potential as a near term source of cellulosic biomass for bioenergy production, but sustainable removal of agricultural residues requires consideration of the critical roles that residues play in the agronomic system. Previous work has developed an integrated model to evaluate sustainable agricultural residue removal potential considering soil erosion, soil organic carbon, greenhouse gas emission, and long-term yield impacts of residue removal practices. The integrated model couples the environmental process models WEPS, RUSLE2, SCI, and DAYCENT. This study uses the integrated model to investigate the impact of interval removal practices in Boone County, Iowa, US. Residue removal of 4.5 Mg/ha was performed annually, bi-annually, and tri-annually and were compared to no residue removal. The study is performed at the soil type scale using a national soil survey database assuming a continuous corn rotation with reduced tillage. Results are aggregated across soil types to provide county level estimates of soil organic carbon changes and individual soil type soil organic matter content if interval residue removal were implemented. Results show interval residue removal is possible while improving soil organic matter. Implementation of interval removal practices provide greater increases in soil organic matter while still providing substantial residue for bioenergy production.

Paracetamol removal in subsurface flow constructed wetlands

Science.gov (United States)

Ranieri, Ezio; Verlicchi, Paola; Young, Thomas M.

2011-07-01

SummaryIn this study two pilot scale Horizontal Subsurface Flow Constructed Wetlands (HSFCWs) near Lecce, Italy, planted with different macrophytes ( Phragmites australis and Typha latifolia) and an unplanted control were assessed for their effectiveness in removing paracetamol. Residence time distributions (RTDs) for the two beds indicated that the Typha bed was characterized by a void volume fraction (porosity) of 0.16 and exhibited more ideal plug flow behavior (Pe = 29.7) than the Phragmites bed (Pe = 26.7), which had similar porosity. The measured hydraulic residence times in the planted beds were 35.8 and 36.7 h when the flow was equal to 1 m 3/d. The Phragmites bed exhibited a range of paracetamol removals from 51.7% for a Hydraulic Loading Rate (HLR) of 240 mm/d to 87% with 120 mm/d HLR and 99.9% with 30 mm/d. The Typha bed showed a similar behavior with percentages of removal slightly lower, ranging from 46.7% (HLR of 240 mm/d) to >99.9% (hydraulic loading rate of 30 mm/d). At the same HLR values the unplanted bed removed between 51.3% and 97.6% of the paracetamol. In all three treatments the paracetamol removal was higher with flow of 1 m 3/d and an area of approx. 7.5 m 2 (half bed) than in the case of flow equal to 0.5 m 3/d with a surface treatment of approx. 3.75 m 2. A first order model for paracetamol removal was evaluated and half lives of 5.16 to 10.2 h were obtained.

Removal of ciprofloxacin from water by birnessite

Energy Technology Data Exchange (ETDEWEB)

Jiang, Wei-Teh, E-mail: atwtj@mail.ncku.edu.tw [Department of Earth Sciences, National Cheng Kung University, Tainan 70101, Taiwan (China); Chang, Po-Hsiang; Wang, Ya-Siang; Tsai, Yolin; Jean, Jiin-Shuh [Department of Earth Sciences, National Cheng Kung University, Tainan 70101, Taiwan (China); Li, Zhaohui, E-mail: li@uwp.edu [Department of Earth Sciences, National Cheng Kung University, Tainan 70101, Taiwan (China); Department of Geosciences, University of Wisconsin – Parkside, Kenosha, WI 53144 (United States); Krukowski, Keith [Department of Geosciences, University of Wisconsin – Parkside, Kenosha, WI 53144 (United States)

2013-04-15

Highlights: ► Ciprofloxacin removal by birnessite was accompanied by interlayer cation exchange. ► Layer expansion and FTIR data suggested ciprofloxacin intercalation into birnessite. ► Adsorption capacity of ciprofloxacin into birnessite was limited by surface area. ► Birnessite in soil systems may provide host for ciprofloxacin accumulation. -- Abstract: With more pharmaceuticals and personal care products detected in the surface and waste waters, studies on interactions between these contaminants and soils or sediments have attracted great attention. In this study, the removal of ciprofloxacin (CIP), a fluoroquinolone antibiotic, by birnessite, a layered manganese oxide, in aqueous solution was investigated by batch studies supplemented by X-ray diffraction (XRD) and Fourier transform infrared analyses. Stoichiometric release of exchangeable cations accompanying CIP removal from water confirmed cation exchange as the major mechanism for CIP uptake by birnessite. Interlayer expansion after CIP adsorption on birnessite as revealed by XRD analyses indicated that intercalation contributed significantly to CIP uptake in addition to external surface adsorption. Correlation of CIP adsorption to specific surface area and cation exchange capacity suggested that the former was the limiting factor for CIP uptake. At the adsorption maximum, CIP molecules formed a monolayer on the birnessite surfaces. The adsorbed CIP could be partially removed using a cationic surfactant at a low initial concentration and mostly removed by AlCl{sub 3} at a higher initial concentration, which further supported the cation exchange mechanism for CIP removal by birnessite. The results indicated that the presence of layered Mn-oxide in the soil and waste water treatment systems may provide host for CIP accumulation.

String Technique for Anterior Orbital Fish Hook Removal.

Science.gov (United States)

Starr, Matthew R; Choi, Michael B; Mahr, Michael A; Mettu, Pradeep; Patterson, David F

2018-06-13

Removing fish hooks is a common procedure performed by many emergency department providers. There are several techniques that are commonly employed to aid in successful removal. However, when a fish hook becomes embedded within the orbit, there are limited options as to avoid damaging vital surrounding structures. The authors report the removal of a fish hook within the anterior orbit using the string technique in a 25-year-old patient. The procedure was performed under general anesthesia with the aid of size 5 polyglactin suture wrapped around the hook. The procedure itself took less than 10 seconds and was successful in swiftly and safely removing the hook without damaging surrounding orbital structures. The patient recovered well without any permanent sequelae.

Technique for the Laparoscopic Removal of Essure Microinserts.

Science.gov (United States)

Mahmoud, Mohamad S

2016-01-01

To describe our technique for the laparoscopic removal of Essure microinserts (Bayer HealthCare Pharmaceuticals Inc., Whippany, NJ). Step-by-step explanation of the procedure using video (Canadian Task Force classification III). Hysteroscopic sterilization using tubal microinsert devices has generally been reported to be well tolerated in terms of procedure-related pain. Persistent pelvic pain requiring microinsert removal has been described in a few case reports and series and was estimated at 0.16% of cases (7 cases [49/4,274]) in a large retrospective study. Removal is usually performed at the patient's request and/or because of persistent pelvic pain unresponsive to other treatments with no other etiologies found. In general, the pain starts at the initial insertion and persists thereafter. Both laparoscopic and hysteroscopic removal approaches have been described in the few cases reported. In this video, we describe our technique for the surgical management of pelvic pain resulting from Essure microinserts. We performed laparoscopic removal of bilateral Essure microinserts in a 30-year-old G3P3 (Gravida 3 Para 3) with bilateral Essure devices placed 2 years before the procedure; hysterosalpingogram confirmed appropriate placement. The patient was suffering from bilateral sharp pelvic pain since insertion that was related to positional change and movements but unrelated to periods along with menorrhagia. A pelvic ultrasound showed a small intramural uterine leiomyoma. She failed a trial of treatment of her symptoms with a levonorgestrel intrauterine device. The patient requested removal of her Essure microinserts and endometrial ablation. She underwent laparoscopic bilateral Essure microinsert removal and bilateral salpingectomy along with hysteroscopic removal of the levonorgestrel intrauterine device and endometrial ablation. Her surgery was uneventful, and she was discharged the day of the surgery. Her symptoms resolved completely after the procedure

Nitrogen removal in Northern peatlands treating mine wastewaters

Science.gov (United States)

Palmer, Katharina; Karlsson, Teemu; Turunen, Kaisa; Liisa Räisänen, Marja; Backnäs, Soile

2015-04-01

Natural peatlands can be used as passive purification systems for mine wastewaters. These treatment peatlands are well-suited for passive water treatment as they delay the flow of water, and provide a large filtration network with many adsorptive surfaces on plant roots or soil particles. They have been shown to remove efficiently harmful metals and metalloids from mine waters due to variety of chemical, physical and biological processes such as adsorption, precipitation, sedimentation, oxidation and reduction reactions, as well as plant uptake. Many factors affect the removal efficiency such as inflow water quality, wetland hydrology, system pH, redox potential and temperature, the nature of the predominating purification processes, and the presence of other components such as salts. However, less attention has been paid to nitrogen (N) removal in peatlands. Thus, this study aimed to assess the efficiency of N removal and seasonal variation in the removal rate in two treatment peatlands treating mine dewatering waters and process effluent waters. Water sampling from treatment peatland inflow and outflow waters as well as pore waters in peatland were conducted multiple times during 2012-2014. Water samples were analysed for total N, nitrate-N and ammonium-N. Additionally, an YSI EXO2 device was used for continuous nitrate monitoring of waters discharged from treatment peatlands to the recipient river during summer 2014. The results showed that the oxic conditions in upper peat layer and microbial activity in treatment peatlands allowed the efficient oxidation of ammonium-N to nitrite-N and further to nitrate-N during summer time. However, the slow denitrification rate restricts the N removal as not all of the nitrate produced during nitrification is denitrified. In summer time, the removal rate of total N varied between 30-99 % being highest in late summer. N removal was clearly higher for treatment peatland treating process effluent waters than for peatland

Removing Pathogens Using Nano-Ceramic-Fiber Filters

Science.gov (United States)

Tepper, Frederick; Kaledin, Leonid

2005-01-01

A nano-aluminum-oxide fiber of only 2 nanometers in diameter was used to develop a ceramic-fiber filter. The fibers are electropositive and, when formulated into a filter material (NanoCeram(TradeMark)), would attract electro-negative particles such as bacteria and viruses. The ability to detect and then remove viruses as well as bacteria is of concern in space cabins since they may be carried onboard by space crews. Moreover, an improved filter was desired that would polish the effluent from condensed moisture and wastewater, producing potable drinking water. A laboratory- size filter was developed that was capable of removing greater than 99.9999 percent of bacteria and virus. Such a removal was achieved at flow rates hundreds of times greater than those through ultraporous membranes that remove particles by sieving. Because the pore size of the new filter was rather large as compared to ultraporous membranes, it was found to be more resistant to clogging. Additionally, a full-size cartridge is being developed that is capable of serving a full space crew. During this ongoing effort, research demonstrated that the filter media was a very efficient adsorbent for DNA (deoxyribonucleic acid), RNA (ribonucleic acid), and endotoxins. Since the adsorption is based on the charge of the macromolecules, there is also a potential for separating proteins and other particulates on the basis of their charge differences. The separation of specific proteins is a major new thrust of biotechnology. The principal application of NanoCeram filters is based on their ability to remove viruses from water. The removal of more than 99.9999 percent of viruses was achieved by a NanoCeram polishing filter added to the effluent of an existing filtration device. NanoCeram is commercially available in laboratory-size filter discs and in the form of a syringe filter. The unique characteristic of the filter can be demonstrated by its ability to remove particulate dyes such as Metanyl yellow. Its

Complication with Removal of a Lumbar Spinal Locking Plate

Directory of Open Access Journals (Sweden)

Brooke Crawford

2015-01-01

Full Text Available Introduction. The use of locking plate technology for anterior lumbar spinal fusion has increased stability of the vertebral fusion mass over traditional nonconstrained screw and plate systems. This case report outlines a complication due to the use of this construct. Case. A patient with a history of L2 corpectomy and anterior spinal fusion presented with discitis at the L4/5 level and underwent an anterior lumbar interbody fusion (ALIF supplemented with a locking plate placed anterolaterally for stability. Fifteen months after the ALIF procedure, he returned with a hardware infection. He underwent debridement of the infection site and removal of hardware. Results. Once hardware was exposed, removal of the locking plate screws was only successful in one out of four screws using a reverse thread screw removal device. Three of the reverse thread screw removal devices broke in attempt to remove the subsequent screws. A metal cutting drill was then used to break hoop stresses associated with the locking device and the plate was removed. Conclusion. Anterior locking plates add significant stability to an anterior spinal fusion mass. However, removal of this hardware can be complicated by the inherent properties of the design with significant risk of major vascular injury.

Removable pipeline plug

International Nuclear Information System (INIS)

Vassalotti, M.; Anastasi, F.

1984-01-01

A removable plugging device for a pipeline, and particularly for pressure testing a steam pipeline in a boiling water reactor, wherein an inflatable annular sealing member seals off the pipeline and characterized by radially movable shoes for holding the plug in place, each shoe being pivotally mounted for self-adjusting engagement with even an out-of-round pipeline interior

Kidney removal - slideshow

Science.gov (United States)

... this page: //medlineplus.gov/ency/presentations/100069.htm Kidney removal (nephrectomy) - series—Normal anatomy To use the sharing features on this page, please enable JavaScript. Go to slide 1 out of 5 Go to slide 2 out of ... to slide 5 out of 5 Overview The kidneys are paired organs that lie posterior to the ...

27 CFR 28.225 - Removals of beer by brewer.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Removals of beer by brewer..., DEPARTMENT OF THE TREASURY LIQUORS EXPORTATION OF ALCOHOL Exportation of Beer With Benefit of Drawback Execution of Claims § 28.225 Removals of beer by brewer. Where a brewer removes taxpaid beer from the...

The RADionuclide Transport, Removal, and Dose (RADTRAD) code

International Nuclear Information System (INIS)

Miller, L.A.; Chanin, D.I.; Lee, J.

1993-01-01

The RADionuclide Transport, Removal, And Dose (RADTRAD) code is designed for US Nuclear Regulatory Commission (USNRC) use to calculate the radiological consequences to the offsite population and to control room operators following a design-basis accident at Light Water Reactor (LWR) power plants. This code utilizes updated reactor accident source terms published in draft NUREG-1465, ''Accident Source Terms for Light-Water Nuclear Power Plants.'' The code will track the transport of radionuclides as they are released from the reactor pressure vessel, travel through the primary containment and other buildings, and are released to the environment. As the radioactive material is transported through the primary containment and other buildings, credit for several removal mechanisms may be taken including sprays, suppression pools, overlying pools, filters, and natural deposition. Simple models are available for these different removal mechanisms that use, as input, information about the conditions in the plant and predict either a removal coefficient (λ) or decontamination factor. The user may elect to use these models or input a single value for a removal coefficient or decontamination factor

Removal of Microbial Contamination from Surface by Plasma

Science.gov (United States)

Feng, Xinxin; Liu, Hongxia; Shen, Zhenxing; Wang, Taobo

2018-01-01

Microbial contamination is closely associated with human and environmental health, they can be tested on food surfaces, medical devices, packing material and so on. In this paper the removal of the microbial contamination from surface using plasma treatment is investigated. The Escherichia coli (E. coli) has been chosen as a bio-indicator enabling to evaluate the effect of plasma assisted microbial inactivation. Oxygen gas was as the working gas. The plasma RF power, plasma exposition time, gas flow and the concentration of organic pollutant were varied in order to see the effect of the plasma treatment on the Gram-negative germ removal. After the treatment, the microbial abatement was evaluated by the standard plate count method. This proved a positive effect of the plasma treatment on Gram-negative germ removal. The kinetics and mathematical model of removal were studied after plasma treatment, and then the removing course of E. coli was analyzed. This work is meaningful for deepening our understanding of the fundamental scientific principles regarding microbial contamination from surface by plasma.

Tank 5 Model for Sludge Removal Analysis

International Nuclear Information System (INIS)

LEE, SI

2004-01-01

Computational fluid dynamics methods have been used to develop and provide slurry pump operational guidance for sludge heel removal in Tank 5. Flow patterns calculated by the model were used to evaluate the performance of various combinations of operating pumps and their orientation under steady-state indexed and transient oscillation modes. A model used for previous analyses has been updated to add the valve housing distribution piping and pipe clusters of the cooling coil supply system near pump no. 8 to the previous tank Type-I model. In addition, the updated model included twelve concrete support columns. This model would provide a more accurate assessment of sludge removal capabilities. The model focused on removal of the sludge heel located near the wall of Tank 5 using the two new slurry pumps. The models and calculations were based on prototypic tank geometry and expected normal operating conditions as defined by Tank Closure Project Engineering. Computational fluid dynamics models of Tank 5 with different operating conditions were developed using the FLUENT (trademark) code. The modeling results were used to assess the efficiency of sludge suspension and removal operations in the 75-ft tank. The models employed a three-dimensional approach, a two-equation turbulence model, and an approximate representation of flow obstructions. The calculated local velocity was used as a measure of sludge removal and mixing capability. For the simulations, modeling calculations were performed with indexed pump orientations until an optimum flow pattern near the potential location of the sludge heel was established for sludge removal. The calculated results demonstrated that the existing slurry pumps running at 3801 gpm flowrate per nozzle could remove the sludge from the tank with a 101 in liquid level, based on a historical minimum sludge suspension velocity of 2.27 ft/sec. The only exception is the region within maximum 4.5 ft distance from the tank wall boundary at the

Method of removing contaminants from plastic resins

Science.gov (United States)

Bohnert, George W.; Hand, Thomas E.; DeLaurentiis, Gary M.

2008-11-18

A method for removing contaminants from synthetic resin material containers using a first organic solvent system and a second carbon dioxide system. The organic solvent is utilized for removing the contaminants from the synthetic resin material and the carbon dioxide is used to separate any residual organic solvent from the synthetic resin material.

Method for removing contaminants from plastic resin

Science.gov (United States)

Bohnert, George W.; Hand, Thomas E.; DeLaurentiis, Gary M.

2008-12-30

A method for removing contaminants from synthetic resin material containers using a first organic solvent system and a second carbon dioxide system. The organic solvent is utilized for removing the contaminants from the synthetic resin material and the carbon dioxide is used to separate any residual organic solvent from the synthetic resin material.

Humic acid removal from aqueous solutions by peroxielectrocoagulation process

Directory of Open Access Journals (Sweden)

Ahmad Reza Yazdanbakhsh

2015-06-01

Full Text Available Background: Natural organic matter is the cause of many problems associated with water treatment such as the presence of disinfection by-products (DBPs and membrane fouling during water filtration. In this study, the performance of the peroxi-electrocoagulation process (PEP was investigated for the removal of humic acids (HAs from aqueous solutions. Methods: PEP was carried out for the removal of HA using a plexiglas reactor with a volume of 2 L and fitted with iron electrodes and a direct current supply (DC. Samples were taken at various amounts of pH (2-4, current density (1 and 2A/cm2, hydrogen peroxide (50-150 mg/L and reaction time (5-20 minutes and then filtered to remove sludge formed during reaction. Finally, the HA concentration was measured by UV absorbance at 254 nm (UV254. Results: Results indicated that increasing the concentration of H2O2 from 50 to 150 mg/L increased HA removal efficiency from 83% to 94.5%. The highest removal efficiency was observed at pH 3.0; by increasing the pH to the alkaline range, the efficiency of the process was reduced. It was found that HA removal efficiency was high in current density 1A/cm2. Increasing current density up to 1 A cm-2 caused a decrease in removal efficiency. Results of this study showed that under the optimum operating range for the process ([current density] = 1A/cm2, [hydrogen peroxide concentration] = 150 mg/L, [reaction time]= 20 minutes and [pH]= 3.0, HA removal efficiency reached 98%. Conclusion: It can be concluded that PEP has the potential to be utilized for cost-effective removal of HA from aqueous solutions.

The investigation of parameters affecting boron removal by electrocoagulation method

International Nuclear Information System (INIS)

Yilmaz, A. Erdem; Boncukcuoglu, Recep; Kocakerim, M. Muhtar; Keskinler, Buelent

2005-01-01

Boron removal from wastewaters by electrocoagulation using aluminum electrode material was investigated in this paper. Several working parameters, such as pH, current density, boron concentration and type and concentration of supporting electrolyte were studied in an attempt to achieve a higher removal capacity. The experiments were carried out by keeping the pH of solution constant and optimum pH of solution was determined 8.0 for the aluminum electrode. Although energy consumption increased with decreasing boron concentration, which conductivity of these solutions were low, boron removal efficiency was higher at 100 mg/L than that of 1000 mg/L. Current density was an important parameter affecting removal efficiency. Boron removal efficiency and energy consumption increased with increasing current density from 1.2 to 6.0 mA/cm 2 . The types of different supporting electrolyte were experimented in order to investigate to this parameter effect on boron removal. The highest boron removal efficiency, 97%, was found by CaCl 2 . Added CaCl 2 increased more the conductivity of solution according to other supporting electrolytes, but decreased energy consumption. The results showed to have a high effectiveness of the electrocoagulation method in removing boron from aqueous solutions

Investigating electrochemical removal of bacterial biofilms from stainless steel substrates.

Science.gov (United States)

Dargahi, Mahdi; Hosseinidoust, Zeinab; Tufenkji, Nathalie; Omanovic, Sasha

2014-05-01

Electrochemical removal of biofilms deserves attention because of its ease of use and environmentally friendly nature. We investigated the influence of electrode potential and treatment time on the removal of a 10-day old Pseudomonas aeruginosa biofilm formed on stainless steel 316 L substrates. At electrode potentials more positive than -1.5 V vs. Ag/AgCl, lower removal rates were observed and only partial removal of the biofilm was achieved during a 1-min time interval. Electrostatic repulsion between the film and electrode surface is believed to drive biofilm detachment under these conditions. However, when the biofilm-coated substrates were treated at potentials negative of -1.5 V vs. Ag/AgCl, complete removal of a biofilm was achieved within seconds. Under these conditions, vigorous evolution of hydrogen gas is believed to be responsible for the film removal, mechanically detaching the bacteria and extracellular polymeric matrix from the substrate. Stainless steel substrates were also subjected to repeated cycles of biofilm formation and electrochemical removal. High removal efficiencies were maintained throughout this process suggesting the potential of the proposed technology for application on conductive surfaces in various industrial settings. Copyright © 2014 Elsevier B.V. All rights reserved.

Removal of trace metal contaminants from potable water by electrocoagulation

Science.gov (United States)

Heffron, Joe; Marhefke, Matt; Mayer, Brooke K.

2016-06-01

This study investigated the effects of four operational and environmental variables on the removal of trace metal contaminants from drinking water by electrocoagulation (EC). Removal efficiencies for five metals (arsenic, cadmium, chromium, lead and nickel) were compared under varying combinations of electrode material, post-treatment, water composition and pH. Iron electrodes out-performed aluminum electrodes in removing chromium and arsenic. At pH 6.5, aluminum electrodes were slightly more effective at removing nickel and cadmium, while at pH 8.5, iron electrodes were more effective for these metals. Regardless of electrode, cadmium and nickel removal efficiencies were higher at pH 8.5 than at pH 6.5. Post-EC treatment using membrane filtration (0.45 μm) enhanced contaminant removal for all metals but nickel. With the exception of lead, all metals exhibited poorer removal efficiencies as the ionic strength of the background electrolyte increased, particularly in the very high-solids synthetic groundwaters. Residual aluminum concentrations were lowest at pH 6.5, while iron residuals were lowest in low ionic strength waters. Both aluminum and iron residuals required post-treatment filtration to meet drinking water standards. EC with post-treatment filtration appears to effectively remove trace metal contaminants to potable water standards, but both reactor and source water parameters critically impact removal efficiency.

Mercury and tritium removal from DOE waste oils

Energy Technology Data Exchange (ETDEWEB)

Klasson, E.T. [Oak Ridge National Lab., TN (United States)

1997-10-01

This work covers the investigation of vacuum extraction as a means to remove tritiated contamination as well as the removal via sorption of dissolved mercury from contaminated oils. The radiation damage in oils from tritium causes production of hydrogen, methane, and low-molecular-weight hydrocarbons. When tritium gas is present in the oil, the tritium atom is incorporated into the formed hydrocarbons. The transformer industry measures gas content/composition of transformer oils as a diagnostic tool for the transformers` condition. The analytical approach (ASTM D3612-90) used for these measurements is vacuum extraction of all gases (H{sub 2}, N{sub 2}, O{sub 2}, CO, CO{sub 2}, etc.) followed by analysis of the evolved gas mixture. This extraction method will be adapted to remove dissolved gases (including tritium) from the SRS vacuum pump oil. It may be necessary to heat (60{degrees}C to 70{degrees}C) the oil during vacuum extraction to remove tritiated water. A method described in the procedures is a stripper column extraction, in which a carrier gas (argon) is used to remove dissolved gases from oil that is dispersed on high surface area beads. This method appears promising for scale-up as a treatment process, and a modified process is also being used as a dewatering technique by SD Myers, Inc. (a transformer consulting company) for transformers in the field by a mobile unit. Although some mercury may be removed during the vacuum extraction, the most common technique for removing mercury from oil is by using sulfur-impregnated activated carbon (SIAC). SIAC is currently being used by the petroleum industry to remove mercury from hydrocarbon mixtures, but the sorbent has not been previously tested on DOE vacuum oil waste. It is anticipated that a final process will be similar to technologies used by the petroleum industry and is comparable to ion exchange operations in large column-type reactors.

Laser tattoo removal: A clinical update

Directory of Open Access Journals (Sweden)

Stephanie GY Ho

2015-01-01

Full Text Available Techniques for tattoo removal have evolved significantly over the years. The commonly used Quality-switched (QS ruby, alexandrite, and Nd:YAG lasers are the traditional workhorses for tattoo removal. Newer strategies using combination laser treatments, multi-pass treatments, and picosecond lasers offer promising results. The tattoo color and skin type of the patient are important considerations when choosing the appropriate laser. Standard protocols can be developed for the effective and safe treatment of tattoos.

Laser Tattoo Removal: A Clinical Update

Science.gov (United States)

Ho, Stephanie GY; Goh, Chee Leok

2015-01-01

Techniques for tattoo removal have evolved significantly over the years. The commonly used Quality-switched (QS) ruby, alexandrite, and Nd:YAG lasers are the traditional workhorses for tattoo removal. Newer strategies using combination laser treatments, multi-pass treatments, and picosecond lasers offer promising results. The tattoo color and skin type of the patient are important considerations when choosing the appropriate laser. Standard protocols can be developed for the effective and safe treatment of tattoos. PMID:25949017

Iodine removing method in organic solvent

International Nuclear Information System (INIS)

Suzuki, Takeo; Sakurai, Manabu

1988-01-01

Purpose: To effectively remove iodine in an organic solvent to thereby remove iodine in the solvent that can be re-used or put to purning treatment. Method: Organic solvent formed from wastes of nuclear facilities is mixed with basic lead acetate, or silica gel or activated carbon incorporated with such a compound to adsorb iodine in the organic solvent to the basic lead acetate. Then, iodine in the organic solvent is removed by separating to eliminate the basic lead acetate adsorbing iodine from the organic solvent or by passing the organic solvent through a tower or column charged or pre-coated with silica gel or activated carbon incorporated with lead acetate. By using basic lead acetate as the adsorbents, iodine can effective by adsorbed and eliminated. Thus, the possibility of circumstantial release of iodine can be reduced upon reusing or burning treatment of the organic solvent. (Kamimura, M.)

One piece reactor removal

International Nuclear Information System (INIS)

Chia, Wei-Min; Wang, Song-Feng

1993-01-01

The strategy of Taiwan Research Reactor Renewal plan is to remove the old reactor block with One Piece Reactor Removal (OPRR) method for installing a new research reactor in original building. In this paper, the engineering design of each transportation works including the work method, the major equipments, the design policy and design criteria is described and discussed. In addition, to ensure the reactor block is safety transported for storage and to guarantee the integrity of reactor base mat is maintained for new reactor, operation safety is drawn special attention, particularly under seismic condition, to warrant safe operation of OPRR. ALARA principle and Below Regulatory Concern (BRC) practice were also incorporated in the planning to minimize the collective dose and the total amount of radioactive wastes. All these activities are introduced in this paper. (J.P.N.)

Pneumatic soil removal tool

International Nuclear Information System (INIS)

Neuhaus, J.E.

1992-01-01

A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw. 3 figs

Pneumatic soil removal tool

Science.gov (United States)

Neuhaus, John E.

1992-01-01

A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw.

Atmospheric carbon dioxide removal: long-term consequences and commitment

International Nuclear Information System (INIS)

Cao Long; Caldeira, Ken

2010-01-01

Carbon capture from ambient air has been proposed as a mitigation strategy to counteract anthropogenic climate change. We use an Earth system model to investigate the response of the coupled climate-carbon system to an instantaneous removal of all anthropogenic CO 2 from the atmosphere. In our extreme and idealized simulations, anthropogenic CO 2 emissions are halted and all anthropogenic CO 2 is removed from the atmosphere at year 2050 under the IPCC A2 CO 2 emission scenario when the model-simulated atmospheric CO 2 reaches 511 ppm and surface temperature reaches 1.8 deg. C above the pre-industrial level. In our simulations a one-time removal of all anthropogenic CO 2 in the atmosphere reduces surface air temperature by 0.8 deg. C within a few years, but 1 deg. C surface warming above pre-industrial levels lasts for several centuries. In other words, a one-time removal of 100% excess CO 2 from the atmosphere offsets less than 50% of the warming experienced at the time of removal. To maintain atmospheric CO 2 and temperature at low levels, not only does anthropogenic CO 2 in the atmosphere need to be removed, but anthropogenic CO 2 stored in the ocean and land needs to be removed as well when it outgasses to the atmosphere. In our simulation to maintain atmospheric CO 2 concentrations at pre-industrial levels for centuries, an additional amount of CO 2 equal to the original CO 2 captured would need to be removed over the subsequent 80 years.

A-Cell equipment removal quality process plan

International Nuclear Information System (INIS)

TAKASUMI, D.S.

1999-01-01

This document establishes the quality assuring activities used to manage the 324 building A-Cell equipment removal activity. This activity will package, remove, transport and dispose of the equipment in A-Cell. This document is provided to ensure that appropriate and effective quality assuring activities have been incorporated into the work controlling documentation and procedures

Flexible Thermoplastic Denture Base Materials for Aesthetical Removable Partial Denture Framework

OpenAIRE

Singh, Kunwarjeet; Aeran, Himanshu; Kumar, Narender; Gupta, Nidhi

2013-01-01

Conventional fixed partial dentures, implant supported Fixed Partial Dentures (FDPs) and removable partial dentures are the most common treatment modalities for the aesthetic and functional rehabilitation of partially edentulous patients. Although implants and FDP have certain advantages over removable partial dentures, in some cases, removable partial dentures may be the only choice which is available. Removable cast partial dentures are used as definitive removable prostheses when indicated...

Biosorbents for Removing Hazardous Metals and Metalloids

Directory of Open Access Journals (Sweden)

Katsutoshi Inoue

2017-07-01

Full Text Available Biosorbents for remediating aquatic environmental media polluted with hazardous heavy metals and metalloids such as Pb(II, Cr(VI, Sb(III and V, and As(III and V were prepared from lignin waste, orange and apple juice residues, seaweed and persimmon and grape wastes using simple and cheap methods. A lignophenol gel such as lignocatechol gel was prepared by immobilizing the catechol functional groups onto lignin from sawdust, while lignosulfonate gel was prepared directly from waste liquor generated during pulp production. These gels effectively removed Pb(II. Orange and apple juice residues, which are rich in pectic acid, were easily converted using alkali (e.g., calcium hydroxide into biosorbents that effectively removed Pb(II. These materials also effectively removed Sb(III and V and As(III and V when these were preloaded with multi-valent metal ions such as Zr(IV and Fe(III. Similar biosorbents were prepared from seaweed waste, which is rich in alginic acid. Other biosorbents, which effectively removed Cr(VI, were prepared by simply treating persimmon and grape wastes with concentrated sulfuric acid.

Comparison between Removal Efficiency of Slag, zeolite, and Conventional media in slow sand Filter for Removal of Lead and Cadmium from Water Resources

Directory of Open Access Journals (Sweden)

A Ebrahimi

2016-03-01

Full Text Available Introduction: Heavy metals owing to their health hazards and high toxicity in low concentration for human and environment have very concern and attention. Slow sand filter is one of the simple and cost-effective for removal of these pollutants. In this method, media play an important role for removal of pollutant. Therefore, the aim of this study was investigation of different media like slag, zeolite, and conventional media in slow sand filter for removal of lead and cadmium. Methods: In this research there are three beds filter include typical filter bed, slag and zeolite that used in pilot plant for investigation of lead and cadmium removal at three concentration of 0.1T 1 and 10 ppm. Each of filters has an internal diameter of 8 cm and a height of 120 cm with Plexiglas, which have a continuous flow operation. Results: The removal efficiency of turbidity by three typical filter bed, slag, and zeolite with initial turbidity of 13 NTU was 46%, 77%, and 89% respectively. Removal efficiency of lead without turbidity was 70.3%, 79%, and 59.8% respectively for 0.1 ppm lead. For 1 ppm, concentration of lead removal efficiency was 51.8%, 52.7% and 52.6% respectively and for 10 ppm it was 53.4%, 57.8%, and 59.8% respectively. Cadmium removal for these media was 23.4%, 37.5%, and 59.4% respectively at 0.1 ppm cadmium. At 1 ppm of cadmium concentration, it was 37.9%, 45% and 41.3% respectively and at 10 ppm concentration of cadmium it was 68.3%, 68.6% and 67% respectively. Conclusion: Slag and zeolite beds are more efficiently than the conventional sand beds in the slow sand filter, so it can be used instead of the usual sand for removing lead and cadmium from resources water.

Substituição parcial do milho por sorgo granífero na alimentação de matrizes suínas primíparas durante a lactação

Directory of Open Access Journals (Sweden)

F.R.C. Moreira

2014-08-01

Full Text Available Avaliou-se o efeito da substituição parcial do milho por sorgo granífero na dieta de matrizes suínas híbridas durante as fases de lactação e pós-desmame. Foram utilizadas 25 fêmeas, distribuídas em três tratamentos, com porcentagens crescentes de sorgo granífero - 0%, 25% e 50% - em substituição ao milho. Os animais foram avaliados durante as fases de lactação e pós-desmame, tendo sido mensurados o peso vivo (PV e a espessura de toucinho (ET ao parto, ao oitavo, 16º e 25º dias de lactação - desmame. Nesses momentos, foram realizadas colheitas de amostras de leite para análise bioquímica. As leitegadas foram pesadas no mesmo intervalo de tempo. No estro pós-desmame (RE, determinou-se o intervalo estro-cobertura (dias, PV e ET. Quanto às fêmeas, não ocorreram efeitos sobre o PV e a ET. Quanto ao número e ao peso dos leitões, as fêmeas do grupo controle apresentaram maior número de leitões nascidos vivos. O GPD dos leitões foi maior nas leitegadas dos tratamentos com 50% de sorgo. Não houve diferença para as análises do leite. No RE, não ocorreram efeitos. Dessa forma, conclui-se que o sorgo granífero pode substituir o milho em até 50% na dieta de fêmeas suínas durante lactação, sem comprometer os parâmetros produtivos e reprodutivos.

Materials removal by water jets with high relative velocity

International Nuclear Information System (INIS)

Schikorr, W.

1986-01-01

By way of introduction approaches to the systematic apprehension of the material removal by water jets up to 1000 bar are made. In drilling experiments the effects of jet dynamic are studied, using the controlled disintegration of the jet. Using model-layer-systems the removal of layers by the 'natural' disintegrating fluid-jet is examined. The mechanisms of material removal and the consequences on the praxis of cleaning are discussed. A concept to measure specially the effects of the dynamic jet components is developed. In conclusion aspects of progress in this methods of material removal are discussed. (orig.) [de

Tattoo removal by Q-switched yttrium aluminium garnet laser

DEFF Research Database (Denmark)

Hutton Carlsen, K; Esmann, J; Serup, J

2017-01-01

BACKGROUND: Tattoo removal by Q-switched yttrium aluminium garnet (YAG) lasers is golden standard; however, clients' satisfaction with treatment is little known. OBJECTIVE: To determine clients' satisfaction with tattoo removal. METHODS: One hundred and fifty-four tattoo removal clients who had...... relative to colour of tattoo on a scale from 0 (no effect) to 10 (complete removal) scored a mean of blue 9.5, black 9.4, yellow 8.9, red 8.8 and green 6.5. Clients were dissatisfied with green pigment remnants, which could mimic bruising. One hundred and twenty-nine clients (84%) experienced moderate...

Impulsive noise removal from color video with morphological filtering

Science.gov (United States)

Ruchay, Alexey; Kober, Vitaly

2017-09-01

This paper deals with impulse noise removal from color video. The proposed noise removal algorithm employs a switching filtering for denoising of color video; that is, detection of corrupted pixels by means of a novel morphological filtering followed by removal of the detected pixels on the base of estimation of uncorrupted pixels in the previous scenes. With the help of computer simulation we show that the proposed algorithm is able to well remove impulse noise in color video. The performance of the proposed algorithm is compared in terms of image restoration metrics with that of common successful algorithms.

Disturbance of deposition and removal of plutonium

International Nuclear Information System (INIS)

Fukuda, Satoshi

1992-01-01

The chelation therapy using DTPA (diethylenetriaminepentaacetic acid) and a new drug, CBMIDA [catechol 3, 6-bis (methyleiminodiacetic acid)] showing more effectiveness on removal of plutonium and lower toxicity than DTPA, is available for occupational exposure but is difficult for public exposure, because there are many reluctant problems on their toxicities, administration routes and times, physical conditions of victims etc. We demonstrated that active amino acid calcium (AAACa), a natural product which mixed oyster shell electrolysate and amino acids of seaweeds, could remove plutonium from bone and liver in rats. The removing methods of radionuclides using the bioavailability of AAACa will be utilized for public exposures and resolve the reluctant problems accompanied with a chelation therapy for occupational exposure. (author)

Microbial electricity driven anoxic ammonium removal.

Science.gov (United States)

Vilajeliu-Pons, Anna; Koch, Christin; Balaguer, Maria D; Colprim, Jesús; Harnisch, Falk; Puig, Sebastià

2018-03-01

Removal of nitrogen, mainly in form of ammonium (NH 4 + ), in wastewater treatment plants (WWTPs) is a highly energy demanding process, mainly due to aeration. It causes costs of about half a million Euros per year in an average European WWTP. Alternative, more economical technologies for the removal of nitrogen compounds from wastewater are required. This study proves the complete anoxic conversion of ammonium (NH 4 + ) to dinitrogen gas (N 2 ) in continuously operated bioelectrochemical systems at the litre-scale. The removal rate is comparable to conventional WWTPs with 35 ± 10 g N m -3 d -1 with low accumulation of NO 2 - , NO 3 - , N 2 O. In contrast to classical aerobic nitrification, the energy consumption is considerable lower (1.16 ± 0.21 kWh kg -1 N, being more than 35 times less than for the conventional wastewater treatment). Biotic and abiotic control experiments confirmed that the anoxic nitrification was an electrochemical biological process mainly performed by Nitrosomonas with hydroxylamine as the main substrate (mid-point potential, E ox  = +0.67 ± 0.08 V vs. SHE). This article proves the technical feasibility and reduction of costs for ammonium removal from wastewater, investigates the underlying mechanisms and discusses future engineering needs. Copyright © 2017 Elsevier Ltd. All rights reserved.

Partial left ventriculectomy in a child: 70-month clinical follow up Ventriculectomia parcial esquerda em criança: acompanhamento clínico por 70 meses

Directory of Open Access Journals (Sweden)

Eduardo Coelho de Souza

2003-10-01

Full Text Available We describe the 70- month follow up of a child with idiopathic dilated cardiomyopathy and end-stage congestive heart failure (NYHA III/IV who underwent partial left ventriculectomy - the Batista operation when he was two and half years old. The clinical follow up was performed in the outpatient clinic by electrocardiography, echocardiography and radionuclide ventriculography to better analyse the left ventricular ejection fraction. The left ventricular diameter increased. Echocardiograms showed enlargement mainly in the systolic left ventricular diameter and slow decrease in fractional shortening (delta D. The child was in class I (NYHA during the follow-up. His exercise endurance was better than before surgery and hospitalization was not necessary. For these reasons, we believe that this procedure can be considered as a therapeutic option in children with severe dilated cardiomiopathy who are waiting for heart transplantation, as the shortage of donors is a fact.Relatamos a evolução durante 70 meses de uma criança submetida a ventriculectomia parcial esquerda, pela técnica de Batista aos 2 anos e 6 meses de idade, em classe funcional III/IV em decorrência de cardiomiopatia dilatada idiopática, com seguimento clínico ambulatorial. Realizamos eletrocardiogramas, ecocardiogramas seriados e ventriculografia radioisotópica para melhor analisar a fração de ejeção do ventrículo esquerdo. Houve progressivo aumento deste. O ecocardiograma mostrou aumento principalmente do diâmetro sistólico do ventrículo esquerdo com queda progressiva, porém lenta, da fração de ejeção. Apesar da progressão da disfunção miocárdica, a criança manteve-se em classe funcional I durante todo o seguimento, com melhora da tolerância ao exercício e não necessitou de internações. Por isso, achamos que o método pode ser considerado opção terapêutica em crianças com cardiomiopatia dilatada avançada, aguardando a indicação mais tardia de

Predator removal and nesting waterbird success at San Francisco Bay, California

Science.gov (United States)

Meckstroth, A.M.; Miles, A.K.

2005-01-01

The efficacy of long-term predator removal in urbanized areas is poorly understood. The impact of predation on ground-nesting waterbirds, as well as predator abundance and composition in predator removal versus non-removal or reference sites were examined at South San Francisco Bay. The success of natural nests and predator activity was monitored using track plates, trip cameras, wire haircatchers and simulated nests. Removal sites had higher nest densities, but lower hatching success than reference sites. Predator composition and abundance were not different at the removal and reference sites for any predator other than feral Cat (Felis domesticus). Striped Skunk (Mephitis mephitis) comprised the majority (84%) of predators removed, yet remained the most abundant predators in removal and reference sites. Urban environments provide supplemental food that may influence skunks and other nest predators to immigrate into vacancies created by predator removal. Based on the findings from this study, predator removal should be applied intensively over a larger geographic area in order to be a viable management strategy for some mammalian species in urbanized areas.

Mechanisms for parasites removal in a waste stabilisation pond.

Science.gov (United States)

Reinoso, Roberto; Blanco, Saúl; Torres-Villamizar, Linda A; Bécares, Eloy

2011-04-01

A waste stabilisation pond (WSP) system formed by two anaerobic ponds, a facultative pond and a maturation pond was studied from December 2003 to September 2004 in north-western Spain in order to evaluate its efficiency in the removal of faecal indicator bacteria (total coliforms, Escherichia coli, faecal streptococci), coliphages, helminth eggs and protozoan (oo)cysts (Cryptosporidium and Giardia). Furthermore, sediment samples were collected from the bottom of the ponds to assess the settling rates and thus determine the main pathogen removal mechanisms in the WSPs system. The overall removal ranged from 1.4 log units for coliphages in the cold period to 5.0 log units for E. coli in the hot period. Cryptosporidium oocysts were reduced by an average of 96%, Giardia cysts by 98% and helminth eggs by 100%. The anaerobic ponds showed significantly higher surface removal rates (4.6, 5.2 and 3.7 log (oo)cysts/eggs removed m(-2) day(-1), respectively) than facultative and maturation ponds. Sunlight and water physicochemical conditions were the main factors influencing C. parvum oocysts removal both in the anaerobic and maturation ponds, whereas other factors like predation or natural mortality were more important in the facultative pond. Sedimentation, the most commonly proposed mechanism for cyst removal had, therefore, a negligible influence in the studied ponds.

Reactor for removing ammonia

Science.gov (United States)

Luo, Weifang [Livermore, CA; Stewart, Kenneth D [Valley Springs, CA

2009-11-17

Disclosed is a device for removing trace amounts of ammonia from a stream of gas, particularly hydrogen gas, prepared by a reformation apparatus. The apparatus is used to prevent PEM "poisoning" in a fuel cell receiving the incoming hydrogen stream.

Removal of heavy metals from sludge of Sanaru-Lake by electrokinetics

Energy Technology Data Exchange (ETDEWEB)

Seno, T.; Shiba, S.; Hirata, Y. [Dept. of Systems Engineering, Shizuoka Univ., Hamamatsu (Japan)

2001-07-01

Two kinds of experiments were carried out for the removal of heavy metals from soils by electrokinetic technique. One was the removal of lead from kaolinite by using a small-sized test cell. The effect of the kind of purging solutions (such as distilled water, tap water, acetic acid and nitric acid) on removal efficiency was examined. High removal efficiency was obtained for the acetic acid solution. It was found that the controlling pH of solution surrounding cathode had a significant influence on the removal efficiency. The other experiment was the removal of heavy metals from the bottom sludge of Sanaru Lake. Zinc, nickel and copper in the sludge were successfully removed, but lead and chromium were hardly able to remove from the sludge. The simplified one-dimensional mathematical model was proposed. The prediction by the model was qualitatively agreed with the experimental result. (orig.)

Water Distribution and Removal Model

International Nuclear Information System (INIS)

Y. Deng; N. Chipman; E.L. Hardin

2005-01-01

The design of the Yucca Mountain high level radioactive waste repository depends on the performance of the engineered barrier system (EBS). To support the total system performance assessment (TSPA), the Engineered Barrier System Degradation, Flow, and Transport Process Model Report (EBS PMR) is developed to describe the thermal, mechanical, chemical, hydrological, biological, and radionuclide transport processes within the emplacement drifts, which includes the following major analysis/model reports (AMRs): (1) EBS Water Distribution and Removal (WD and R) Model; (2) EBS Physical and Chemical Environment (P and CE) Model; (3) EBS Radionuclide Transport (EBS RNT) Model; and (4) EBS Multiscale Thermohydrologic (TH) Model. Technical information, including data, analyses, models, software, and supporting documents will be provided to defend the applicability of these models for their intended purpose of evaluating the postclosure performance of the Yucca Mountain repository system. The WD and R model ARM is important to the site recommendation. Water distribution and removal represents one component of the overall EBS. Under some conditions, liquid water will seep into emplacement drifts through fractures in the host rock and move generally downward, potentially contacting waste packages. After waste packages are breached by corrosion, some of this seepage water will contact the waste, dissolve or suspend radionuclides, and ultimately carry radionuclides through the EBS to the near-field host rock. Lateral diversion of liquid water within the drift will occur at the inner drift surface, and more significantly from the operation of engineered structures such as drip shields and the outer surface of waste packages. If most of the seepage flux can be diverted laterally and removed from the drifts before contacting the wastes, the release of radionuclides from the EBS can be controlled, resulting in a proportional reduction in dose release at the accessible environment

Water Distribution and Removal Model

Energy Technology Data Exchange (ETDEWEB)

Y. Deng; N. Chipman; E.L. Hardin

2005-08-26

The design of the Yucca Mountain high level radioactive waste repository depends on the performance of the engineered barrier system (EBS). To support the total system performance assessment (TSPA), the Engineered Barrier System Degradation, Flow, and Transport Process Model Report (EBS PMR) is developed to describe the thermal, mechanical, chemical, hydrological, biological, and radionuclide transport processes within the emplacement drifts, which includes the following major analysis/model reports (AMRs): (1) EBS Water Distribution and Removal (WD&R) Model; (2) EBS Physical and Chemical Environment (P&CE) Model; (3) EBS Radionuclide Transport (EBS RNT) Model; and (4) EBS Multiscale Thermohydrologic (TH) Model. Technical information, including data, analyses, models, software, and supporting documents will be provided to defend the applicability of these models for their intended purpose of evaluating the postclosure performance of the Yucca Mountain repository system. The WD&R model ARM is important to the site recommendation. Water distribution and removal represents one component of the overall EBS. Under some conditions, liquid water will seep into emplacement drifts through fractures in the host rock and move generally downward, potentially contacting waste packages. After waste packages are breached by corrosion, some of this seepage water will contact the waste, dissolve or suspend radionuclides, and ultimately carry radionuclides through the EBS to the near-field host rock. Lateral diversion of liquid water within the drift will occur at the inner drift surface, and more significantly from the operation of engineered structures such as drip shields and the outer surface of waste packages. If most of the seepage flux can be diverted laterally and removed from the drifts before contacting the wastes, the release of radionuclides from the EBS can be controlled, resulting in a proportional reduction in dose release at the accessible environment. The purposes

Methods of removing uranium from drinking water. 1. A literature survey. 2. Present municipal water treatment and potential removal methods

International Nuclear Information System (INIS)

Drury, J.S.; Michelson, D.; Ensminger, J.T.; Lee, S.Y.; White, S.K.

1982-12-01

Literature was searched for methods of removing uranium from drinking water. U.S. manufacturers and users of water-treatment equipment and products were also contacted regarding methods of removing uranium from potable water. Based on the results of these surveys, it was recommended that untreated, partially treated, and finished water samples from municipal water-treatment facilities be analyzed to determine the extent of removal of uranium by presently used procedures, and that additional laboratory studies be performed to determine what changes are needed to maximize the effectiveness of treatments that are already in use in existing water-treatment plants

Biochemical Removal of HAP Precursors from Coal

Energy Technology Data Exchange (ETDEWEB)

Olson, Gregory J

1997-05-12

Column biooxidation tests with Kentucky coal confirmed results of earlier shake flask tests showing significant removal from the coal of arsenic, selenium, cobalt, manganese, nickel and cadmium. Rates of pyrite biooxidation in Kentucky coal were only slightly more than half the rates found previously for Indiana and Pittsburgh coals. Removal of pyrite from Pittsburgh coal by ferric ion oxidation slows markedly as ferrous ions accumulate in solution, requiring maintenance of high redox potentials in processes designed for removal of pyrite and hazardous air pollutant (HAP) precursors by circulation of ferric solutions through coal. The pyrite oxidation rates obtained in these tests were used by Unifield Engineering to support the conceptual designs for alternative pyrite and HAP precursor bioleaching processes for the phase 2 pilot plant. Thermophilic microorganisms were tested to determine if mercury could be mobilized from coal under elevated growth temperatures. There was no evidence for mercury removal from coal under these conditions. However, the activity of the organisms may have liberated mercury physically. It is also possible that the organisms dissolved mercury and it readsorbed to the clay preferentially. Both of these possibilities are undergoing further testing. The Idaho National Engineering and Environmental Laboratory's (INEEL) slurry column reactor was operated and several batches of feed coal, product coal, waste solids and leach solutions were submitted to LBL for HAP precursor analysis. Results to date indicate significant removal of mercury, arsenic and other HAP precursors in the combined physical-biological process.

The investigation of parameters affecting boron removal by electrocoagulation method

Energy Technology Data Exchange (ETDEWEB)

Yilmaz, A. Erdem [Department of Environmental Engineering, Atatuerk University, Faculty of Engineering, Erzurum (Turkey)]. E-mail: aerdemy@atauni.edu.tr; Boncukcuoglu, Recep [Department of Environmental Engineering, Atatuerk University, Faculty of Engineering, Erzurum (Turkey); Kocakerim, M. Muhtar [Department of Chemical Engineering, 25240, Atatuerk University, Faculty of Engineering Erzurum (Turkey); Keskinler, Buelent [Department of Environmental Engineering, Gebze Institute of Technology, Gebze/Kocaeli 41400 (Turkey)

2005-10-17

Boron removal from wastewaters by electrocoagulation using aluminum electrode material was investigated in this paper. Several working parameters, such as pH, current density, boron concentration and type and concentration of supporting electrolyte were studied in an attempt to achieve a higher removal capacity. The experiments were carried out by keeping the pH of solution constant and optimum pH of solution was determined 8.0 for the aluminum electrode. Although energy consumption increased with decreasing boron concentration, which conductivity of these solutions were low, boron removal efficiency was higher at 100 mg/L than that of 1000 mg/L. Current density was an important parameter affecting removal efficiency. Boron removal efficiency and energy consumption increased with increasing current density from 1.2 to 6.0 mA/cm{sup 2}. The types of different supporting electrolyte were experimented in order to investigate to this parameter effect on boron removal. The highest boron removal efficiency, 97%, was found by CaCl{sub 2}. Added CaCl{sub 2} increased more the conductivity of solution according to other supporting electrolytes, but decreased energy consumption. The results showed to have a high effectiveness of the electrocoagulation method in removing boron from aqueous solutions.

Native plant community response to alien plant invasion and removal

Directory of Open Access Journals (Sweden)

Jara ANDREU

2011-01-01

Full Text Available Given the potential ecological impacts of invasive species, removal of alien plants has become an important management challenge and a high priority for environmental managers. To consider that a removal effort has been successful requires both, the effective elimination of alien plants and the restoration of the native plant community back to its historical composition and function. We present a conceptual framework based on observational and experimental data that compares invaded, non-invaded and removal sites to quantify invaders’ impacts and native plant recover after their removal. We also conduct a meta-analysis to quantitatively evaluate the impacts of plant invaders and the consequences of their removal on the native plant community, across a variety of ecosystems around the world. Our results that invasion by alien plants is responsible for a local decline in native species richness and abundance. Our analysis also provides evidence that after removal, the native vegetation has the potential to recover to a pre-invasion target state. Our review reveal that observational and experimental approaches are rarely used in concert, and that reference sites are scarcely employed to assess native species recovery after removal. However, we believe that comparing invaded, non-invaded and removal sites offer the opportunity to obtain scientific information with relevance for management.

Sequestration Resins for Accelerating Removal of Radioactive Contaminants

International Nuclear Information System (INIS)

Frattini, Paul-L.; Wells, Daniel-M.; Garcia, Susan-E.; Richard, Kohlmann; Asay, Roger; Yengoyan, Leon

2012-09-01

The Electric Power Research Institute (EPRI) is developing sequestration resins that can be used in the treatment of nuclear plant water streams for the enhanced removal of ionic cobalt. EPRI is focusing on three key areas of success: 1. Plant safety. The resins that are synthesized must be fully tested to determine that no leachable species or decomposition products (in the event of a resin bed failure) would be introduced to the plant. 2. Acceptable system performance. The resins are currently being synthesized in a powdered form for use in the reactor water clean-up and fuel pool clean-up systems that utilize pre-coatable filter elements. The resins must have effective flocking behavior; uniform application over the underlay resin and efficient removal from the septa elements after use. Bead type resins are also under development. 3. Enhanced cobalt removal. The resins are expected to out-perform the currently used ion exchange resins in the removal of ionic cobalt. During nuclear plant maintenance or refueling outages, current ion exchange resins may require several days to reduce concentrations of cobalt (for example, radio-cobalt 60 Co and 58 Co) and other activated corrosion products to safe levels in reactor coolant streams. This performance limitation often delays key maintenance activities. EPRI's resins are expected to provide at least a three-fold increase in removal capacity in light water reactor coolants. These resins also offer the potential for higher overall removal efficiencies reducing occupational exposures and waste management costs. This paper addresses issues from the range of novel resin development for radio-cobalt removal from synthesis at the bench-top level through scale-up to demonstration of use in an actual operating nuclear power plant. (authors)

Sodium removal by alcohol process: Basic tests and its application

International Nuclear Information System (INIS)

Nakai, S.; Yamamoto, S.; Akai, M.; Yatabe, T.

1997-01-01

We have various methods for sodium removal; an alcohol cleaning process, a steam cleaning process and a direct burning process. Sodium removal by the alcohol process has a lot of advantages, such as causing no alkali corrosion to steel, short processing time and easy operation. Therefore the alcohol process was selected for the 1MWt double wall tube straight type steam generator. We have already had some experiences of the alcohol process, while still needed to confirm the sodium removal rate in the crevice and to develop an on-line sodium concentration monitoring method in alcohol during sodium removal. We have conducted the small scale sodium removal test with flowing alcohol where the sodium removal rate in the crevice and the alcohol conductivity were measured as functions of sodium concentration in alcohol and alcohol temperature. The sodium removal of the DWTSG was conducted by the devised alcohol process safely and efficiently. The process hour was about 1 day. Visual inspection during dismantling of the DWTSG showed no evidence of any un-reacted sodium. (author)

Removal of a seized fuel channel from the KANUPP reactor

International Nuclear Information System (INIS)

Butt, W.M.; Gunn, R.J.

1995-01-01

In support of the Safe operation of KANUPP program, AECL was commissioned in early 1992 to assist the Karachi Nuclear Power Plant in the design and supply of equipment and procedures for removal of a seized fuel channel from the KANUPP CANDU reactor. In addition AECL was also asked to supply technical site support to assist the KANUPP station staff during the removal of the G-12 channel. The design of a fuel channel removal system presented an interesting challenge. The fuel channel design was unique to KANUPP with no history of previous channel removal, consequently nearly all tools and equipment had to be specially designed. In addition, the seized end fitting posed a special problem requiring the development several contingency tools and techniques. This paper is an account of the design and development of the removal system and the site experiences during the actual fuel channel removal. After the channel had been removed, it was confirmed that a corrosion seizure between the end fitting sleeve bearings was inhibiting normal channel elongation. (author)

Phenol Removal from Industrial Wastewater by HRP Enzyme

Directory of Open Access Journals (Sweden)

Iran Alemzadeh

2009-01-01

Full Text Available In this research, horseradish peroxidase for phenol removal was utilized. First, the process was studied at the laboratory scale using a synthetic phenol solution (1-10 mM. Results showed that horseradish peroxidase (HRP could effectively remove phenolic compounds from wastewater and that the catalytic capability of the enzyme was maintained for a wide range of pH, temperature, and aromatic concentration levels. The performance conditions were optimized for at lease 95% and 100% removal of phenolic compounds for both actual and synthetic wastewaters under high and low phenol concentrations (1 and 10 mM. The phenolic wastewater used was an olive mill effluent with a phenol concentration of 1221 mg/L (13 mM and a pH value of 3.5. At the end of the reaction, the phenolic compounds changed to insoluble polymers and precipitated. Each enzyme/wastewater system was optimized for the following chemical dosages: hydrogen peroxide, enzyme, polyethylene glycol (PEG, and buffer. Furthermore, the reaction time to achieve at least 95% phenol removal was determined. According to the results, COD and BOD reduced to 58% and 78%, respectively. Experimental results showed an increase in H2O2 concentration beyond the optimum dose resulting from enzyme inactivation, thus reducing the phenol removal efficiency. On the other hand, increasing the enzyme, PEG, and/or reaction time beyond the optimum values resulted in only a marginal increase in removal efficiency.

Dust particle removal efficiency of a venturi scrubber

International Nuclear Information System (INIS)

Ali, Majid; Yan, Changqi; Sun, Zhongning; Gu, Haifeng; Mehboob, Khurram

2013-01-01

Highlights: ► Experimental and theoretical study of dust removal efficiency in venturi scrubber. ► Dust removal efficiency 99.5% is achieved at throat gas velocity 220 m/s. ► Results obtained from mathematical model concur well with experimental results. - Abstract: The venturi scrubber is one of the most efficient gas cleaning devices to remove the contaminated particles from gaseous stream during severe accident in nuclear power plant. This study is focused on the dust particle removal efficiency of the venturi scrubber experimentally and theoretically. The venturi scrubber encapsulates the dust particles in petite water droplets flowing into it. The water injected into the scrubber is in the form of water film. The study investigates the removal efficiency of venturi scrubber for throat gas velocities of 130, 165 and 200 m/s and liquid flow rates 0.3–1 m 3 /h, whereas dust concentration ranges between 0.1 and 1 g/m 3 . The hydrophobic titanium dioxide (TiO 2 ) particles having density 4.23 g/cm 3 and mean diameter of 1 μm are used as dust particles in this research. Filtration technique is used to measure the concentration of dust particles at inlet and outlet. Experimental results show that the removal efficiency is higher with the increase of throat gas velocity and liquid flow rate. A mathematical model is employed for the verification of experimental results. The model concurs well with the experimental results

Membrane Characteristics for Removing Particulates in PFC Wastes

International Nuclear Information System (INIS)

Kim, Gye Nam; Lee, Sung Yeol; Won, Hui Jun; Jung, Chong Hun; Oh, Won Zin; Park, Jin Ho

2005-01-01

Pc (Per fluorocarbon) decontamination process is one of best methods to remove hot particulate adhered at inside surface of hot cell and surface of equipment in hot cell. It was necessary to develop a particulate filtration equipment to reuse Pc solution used on Pc decontamination due to its high cost and to minimize the volume of second wastewater. Contamination characteristics of hot particulate were investigated and then a filtration process was presented to remove hot particulate in Pc solution generated through Pc decontamination process. The removal efficiency of Pvdf (Poly vinylidene fluoride), Pp (Polypropylene), Ceramic (Al 2 O 3 ) filter showed more than 95%. The removal efficiency of Pvdf filter was a little lower than those of other kiters at same pressure (3 psi). A ceramic filter showed a higher removal efficiency with other filters, while a little lower flux rate than other filters. Due to inorganic composition, a ceramic filter was highly stable against radio nuclides in comparison with Pvdf and Pp membrane, which generate H 2 gas in α-radioactivity atmosphere. Therefore, the adoption of ceramic filter is estimated to be suitable for the real nitration process.

Removal of Cobalt Ions by Precipitate Foam Flotation

Energy Technology Data Exchange (ETDEWEB)

Jung, In Ha; Lee, Jung Won [Korea Atomic Energy Research Institute, Taejon (Korea)

1998-09-30

Simulated waste liquid containing 50 ppm cobalt ion was tested by precipitate flotation using a sodium lauryl sulfate as a collector. The effects of initial cobalt ion concentration, pH, surfactant concentration, flotation time, gas flow rate and foreign ions on removal efficiency of cobalt ion were studied. Pretreatment of the waste liquid with 35% H{sub 2}O{sub 2} prior to precipitate flotation made shift of optimal flotation pH from the strong alkalinity to weak alkaline range and made a favorable flotation of cobalt ion in wide range of pH. For the result of this experiment, 99.8% removal efficiency was obtained on the conditions of initial cobalt ion concentration 50 ppm, pH 9.5, gas flow rate 70 ml/min, flotation time 30 min. The simulate ion was formed to be the most harmful ion against removal of cobalt by precipitate flotation of the species which were tested. The presence of 0.1 M of SO{sub 4}{sup 2-} ion decreased removal efficiency of cobalt to 90% while the cobalt were almost entirely removed in the absence of sulfate ion. (author). 11 refs., 8 figs.

Removal of Alkylphenols from Industrial and Municipal Wastewater

Directory of Open Access Journals (Sweden)

J. Derco

2017-07-01

Full Text Available The results of the study of removal of nonylphenol, octylphenol and their ethoxylates from real industrial and municipal wastewater are presented. Industrial wastewater was pre-treated by coagulation with FeCl3 and adsorption on zeolite, before discharging into municipal sewer system. Their removal efficiencies in primary sedimentation tank of municipal WWTP were very low. From the practical point of view, the highest and the most significant removal efficiencies within the whole WWTP were observed for nonylphenol and nonylphenol ethoxylates. Dominancy of abiotic mechanisms of alkylphenols removal follows from adsorption measurements. Activated sludge cultivated in lab-scale extended aeration tank accounted for relatively high adsorption affinity to these substances. Activated sludge sampled from municipal wastewater treatment plant (MWWTP receiving industrial wastewater containing alkylphenols accounted for very low adsorption affinity to these pollutants. Significantly higher removal efficiency of octylphenol ethoxylates was observed with the O3/granular active carbon (GAC process compared to the ozonation process alone. Lower toxicity impact of intermediates and products of ozonation treatment on Vibrio fischeri was measured in comparison to the O3/GAC process. Actually, the municipal WWTP effluent discharge concentration values complies with EQS values, including nonylphenols.

Photoresist removal using gaseous sulfur trioxide cleaning technology

Science.gov (United States)

Del Puppo, Helene; Bocian, Paul B.; Waleh, Ahmad

1999-06-01

A novel cleaning method for removing photoresists and organic polymers from semiconductor wafers is described. This non-plasma method uses anhydrous sulfur trioxide gas in a two-step process, during which, the substrate is first exposed to SO3 vapor at relatively low temperatures and then is rinsed with de-ionized water. The process is radically different from conventional plasma-ashing methods in that the photoresist is not etched or removed during the exposure to SO3. Rather, the removal of the modified photoresist takes place during the subsequent DI-water rinse step. The SO3 process completely removes photoresist and polymer residues in many post-etch applications. Additional advantages of the process are absence of halogen gases and elimination of the need for other solvents and wet chemicals. The process also enjoys a very low cost of ownership and has minimal environmental impact. The SEM and SIMS surface analysis results are presented to show the effectiveness of gaseous SO3 process after polysilicon, metal an oxide etch applications. The effects of both chlorine- and fluorine-based plasma chemistries on resist removal are described.

Improvement of sludge removal performance for steam generators

International Nuclear Information System (INIS)

Nishida, K.; Sakai, K.; Ito, H.; Tanahashi, A.; Nakao, F.

2002-01-01

Scale, mainly consisting of magnetite, flows on the secondary side of steam generators (SGs), causing the formation of concentrations of impurities on the tubesheet (TS), increasing the fouling of tube heat transfer, and blocking the broached egg crates (BEC) on the tube support plates (TSP). Accumulation of sludge on the tubesheet forms environment in which impurities are highly concentrated on the tubes. And we have experienced tube degradation, in the past, from the concentration of impurities. In Japan, the first tubesheet sludge lancing, via water jets, was done at the Mihama-2 plant in 1975. And that is why this pile sludge becomes hard depending on time, removal made an effort toward removal with CECIL* (in bundle cleaning system) us very difficulty. However, sludge remained in localized areas and it had possibility of concentration. So that we improve the CECIL for the purpose of removing it, and we improved removal performance of the device. In addition to the improvement of CECIL, we install a sludge collector in order to decrease accumulation of sludge on the tubesheet. This paper introduces these improvements in sludge removal performance. (authors)

Technological innovations in tissue removal during rhinologic surgery.

Science.gov (United States)

Sindwani, Raj; Manz, Ryan

2012-01-01

The modern rhinologist has a wide variety of technological innovations at his/her disposal for the removal of soft tissue and bone during endoscopic surgery. We identified and critically evaluated four leading tissue removal technologies that have impacted, or are poised to impact, rhinological surgery. A literature review was conducted. Technological functions, strengths and limitations of microdebriders, radio frequency ablation, endoscopic drills, and ultrasonic aspirators were explored. The primary drawback of powered instruments continues to be the higher costs associated with their use, and their main advantage is the ability to accomplish multiple functions such as tissue removal, suction, and irrigation, all with one tool. The effective and safe use of any powered instrument requires an intimate understanding of its function, capabilities, and limitations. Powered instrumentation continues to play a significant and evolving role in soft tissue and bone removal during rhinologic surgery.

Comparative analysis of unilateral removable partial denture and classical removable partial denture by using finite element method

Directory of Open Access Journals (Sweden)

Radović Katarina

2010-01-01

Full Text Available Introduction. Various mobile devices are used in the therapy of unilateral free-end saddle. Unilateral dentures with precise connectivity elements are not used frequently. In this paper the problem of applying and functionality of unilateral freeend saddle denture without major connector was taken into consideration. Objective. The aim was to analyze and compare a unilateral RPD (removable partial denture and a classical RPD by calculating and analyzing stresses under different loads. Methods. 3D models of unilateral removable partial denture and classical removable partial denture with casted clasps were made by using computer program CATIA V5 (abutment teeth, canine and first premolar, with crowns and abutment tissues were also made. The models were built in full-scale. Stress analyses for both models were performed by applying a force of 300 N on the second premolar, a force of 500 N on the first molar and a force of 700 N on the second molar. Results. The Fault Model Extractor (FME analysis and calculation showed the complete behavior of unilateral removable partial denture and abutments (canine and first premolar, as well as the behavior of RPD under identical loading conditions. Applied forces with extreme values caused high stress levels on both models and their abutments within physiological limits. Conclusion. Having analyzed stresses under same conditions, we concluded that the unilateral RPD and classical RPD have similar physiological values.

Cr(VI) removal from aqueous solution by dried activated sludge biomass

International Nuclear Information System (INIS)

Wu Jun; Zhang Hua; He Pinjing; Yao Qian; Shao Liming

2010-01-01

Batch experiments were conducted to remove Cr(VI) from aqueous solution using activated sludge biomass. The effects of acid pretreatment of the biomass, initial pH, biomass and Cr(VI) concentrations on Cr(VI) removal efficiency were investigated. Proton consumption during the removal process and the reducing capacity of sludge biomass were studied. The results show that acid pretreatment could significantly improve Cr(VI) removal efficiency and increase Cr(VI) reducing capacity by 20.4%. Cr(VI) removal was remarkably pH-dependent; lower pH (pH = 1, 2) facilitated Cr(VI) reduction while higher pH (pH = 3, 4) favored sorption of the converted Cr(III). Lower Cr(VI) concentration as well as higher biomass concentration could accelerate Cr(VI) removal. Cr(VI) reduction was not the only reason for proton consumption in the removal process. Pseudo-second-order adsorption kinetic model could successfully simulate Cr(VI) removal except under higher pH conditions (pH = 3, 4).

Cholesterol Removal from Whole Egg by Crosslinked β-Cyclodextrin

Directory of Open Access Journals (Sweden)

H. J. Jeong

2014-04-01

Full Text Available This study was carried out to optimize cholesterol removal in whole egg using crosslinked β-cyclodextrin (β-CD and to recycle the β-CD. Various factors for optimizing conditions were concentration of the β-CD, mixing temperature, mixing time, mixing speed and centrifugal speed. In the result of this study, the optimum conditions of cholesterol removal were 25% crosslinked β-CD, 40°C mixing temperature, 30 min mixing time, 1,200 rpm mixing speed and 2,810×g centrifugal speed. The recycling was repeated five times. The cholesterol removal was 92.76% when treated with the optimum conditions. After determining the optimum conditions, the recyclable yields of the crosslinked β-CD ranged from 86.66% to 87.60% in the recycling and the percentage of cholesterol removal was over 80% until third recycling. However, the cholesterol removal efficiency was decreased when the number of repeated recycling was increased. Based on the result of this study, it was concluded that the crosslinked β-CD was efficient for cholesterol removal in whole egg, and recycling is possible for only limited repeating times due to the interaction of the β-CD and egg protein.

Biofouling Removal and Protein Detection Using a Hypersonic Resonator.

Science.gov (United States)

Pan, Shuting; Zhang, Hongxiang; Liu, Wenpeng; Wang, Yanyan; Pang, Wei; Duan, Xuexin

2017-08-25

Nonspecific binding (NSB) is a general issue for surface based biosensors. Various approaches have been developed to prevent or remove the NSBs. However, these approaches either increased the background signals of the sensors or limited to specific transducers interface. In this work, we developed a hydrodynamic approach to selectively remove the NSBs using a microfabricated hypersonic resonator with 2.5 gigahertz (GHz) resonant frequency. The high frequency device facilitates generation of multiple controlled microvortexes which then create cleaning forces at the solid-liquid interfaces. The competitive adhesive and cleaning forces have been investigated using the finite element method (FEM) simulation, identifying the feasibility of the vortex-induced NSB removal. NSB proteins have been selectively removed experimentally both on the surface of the resonator and on other substrates which contact the vortexes. Thus, the developed hydrodynamic approach is believed to be a simple and versatile tool for NSB removal and compatible to many sensor systems. The unique feature of the hypersonic resonator is that it can be used as a gravimetric sensor as well; thus a combined NSB removal and protein detection dual functional biosensor system is developed.

REDUCING ARSENIC LEVELS IN DRINKING WATER DURING IRON REMOVAL PROCESSES

Science.gov (United States)

The presentation provides an overview of iron removal technology for the removal of arsenic from drinking water. The presentation is divided into several topic topics: Arsenic Chemistry, Treatment Selection, Treatment Options, Case Studies and Iron Removal Processes. Each topic i...

Separately removable tubes in heavy duty heat exchanger assemblies

International Nuclear Information System (INIS)

Neudeck, G.T.

1980-01-01

The invention is directed to removable heat exchanger tube assemblies in heavy duty equipment radiators in which the tubes are each separately removable if they become defective in service. An inwardly facing annular ledge or abutment is molded into the inside diameter of each upper and lower sealing member to receive the respective ends of the tubes and prevent vertical movement of the tubes in service. A flange or shoulder is also provided on the lower portions of each tube and engages the inside of the lower sealing member to further restrain downward movement of the tubes in service. Each tube may be removed by pushing the tube upwardly to overcome the upper ledge abutment and thereby lift the tube free of the lower seal. Each tube may then be removed sidewise from the radiator. Variations of the removable sealing arrangement can be made and are described herein

Mercury removal sorbents

Science.gov (United States)

Alptekin, Gokhan

2016-03-29

Sorbents and methods of using them for removing mercury from flue gases over a wide range of temperatures are disclosed. Sorbent materials of this invention comprise oxy- or hydroxyl-halogen (chlorides and bromides) of manganese, copper and calcium as the active phase for Hg.sup.0 oxidation, and are dispersed on a high surface porous supports. In addition to the powder activated carbons (PACs), this support material can be comprised of commercial ceramic supports such as silica (SiO.sub.2), alumina (Al.sub.2O.sub.3), zeolites and clays. The support material may also comprise of oxides of various metals such as iron, manganese, and calcium. The non-carbon sorbents of the invention can be easily injected into the flue gas and recovered in the Particulate Control Device (PCD) along with the fly ash without altering the properties of the by-product fly ash enabling its use as a cement additive. Sorbent materials of this invention effectively remove both elemental and oxidized forms of mercury from flue gases and can be used at elevated temperatures. The sorbent combines an oxidation catalyst and a sorbent in the same particle to both oxidize the mercury and then immobilize it.

Milk removal

OpenAIRE

Ferneborg, Sabine

2016-01-01

Milk from dairy cows is a staple dietary component for humans all over the world. Regardless of whether milk is consumed in its purest, unaltered form or as high-end products such as fine cheese or ice cream, it needs to be of high quality when taken from the cow, produced at a low price and produced in a system that consider aspects such as animal health, animal welfare and sustainability. This thesis investigated the role of milk removal and the importance of residual milk on milk yield...

Ventriculectomia parcial: um novo conceito no tratamento cirúrgico de cardiopatias em fase final Partial ventriculectomy: a new concept for surgical treatment of end stage cardiopathies

Directory of Open Access Journals (Sweden)

Randas J. V Batista

1996-03-01

Full Text Available A melhora clínica da função cardíaca pós aneurismectomia de ventrículo esquerdo e/ou cardiomioplastia com o músculo grande dorsal parece ser, ao menos parcialmente, devida ao remodelamento do ventrículo esquerdo. Através de pesquisa em nosso laboratório experimental com carneiros, demonstramos que o aumento do diâmetro do ventrículo é mais importante que a perda de massa muscular para a deterioração da função ventricular. Sabendo-se que em miocardiopatia dilatada não ocorre aumento de massa muscular, reduzimos o diâmetro do ventrículo para o normal, em uma série consecutiva de pacientes com esta lesão. No período de 1984 a 1995, foram operados com esta nova técnica, denominada, então, "Ventriculectomia Parcial", 103 pacientes portadores de miocardiopatias complexas e insuficiência cardíaca congestiva (NYHA IV. A operação é baseada na lei de Laplace (T=P.11.D e consistiu na remoção de uma fatia de músculo da parede lateral do ventrículo esquerdo, iniciando-se na ponta deste, estendendo-se entre os músculos papilares e terminando próximo ao anel mitral. A cirurgia é realizada sob circulação extracorpórea normotérmica e não se utiliza cardioplegia. "Todos os pacientes foram avaliados pré-operatoriamente com ecodopplercardiografia e ventriculografia digital, os quais revelaram fração de ejeção The clinical improvement of cardiac function post left ventricular aneurysmectomy and/or cardiomyoplasty with the latissimus dorsi muscle seems to be due to the remodeling of the left ventricle. We did some experiments with sheep in our laboratory and we concluded that the increment of ventricular diameter is more deleterious than loss of muscle mass to the ventricular function. Since there is no increment in muscle mass to the dilated hearts, we reduced their diameter to accomplish a better ventricular function in a series of very sick patients with dilated hearts. From 1984 to 1995, 103 patients with complex

Techniques for removing contaminants from optical surfaces

International Nuclear Information System (INIS)

Stowers, I.F.; Patton, H.G.

1978-01-01

Particle removal procedures such as plasma cleaning, ultrasonic agitation of solvents, detergents, solvent wiping, mild abrasives, vapor degreasing, high pressure solvent spraying and others have been evaluated and the results are reported here. Wiping with a lens tissue wetted with an organic solvent and high pressure fluid spraying are the only methods by which particles as small as 5 μm can be effectively removed. All of the other methods tested were found to be at least two orders of magnitude less effective at removing small insoluble particles. An additional and as yet unresolved problem is the development of a reliable method for evaluating particulate surface cleanliness. Without such a reproducible monitoring technique, the large diversity of cleaning methods currently available cannot be quantitatively evaluated

Treatment techniques for the removal of radioactive contaminants from drinking water

International Nuclear Information System (INIS)

Logsdon, Gary S.

1978-01-01

Maximum contaminant levels have been set for radioactive contaminants, as required by the Safe Drinking Water Act (PL 93-523). Treatment techniques are available for removing radium and beta-gamma emitters. Presently-used methods of removing radium-226 are precipitative lime softening (80-90% removal) ion exchange softening (95% removal) and reverse osmosis (95% removal). The 5 p Ci/l limit for radium can be met with conventional technology for raw waters in the 5-100 p Ci/l concentration range. Treatment for removal of beta or gamma emitters must be based upon chemical rather than radioactive characteristics of the contaminant. Reverse osmosis can remove a broad spectrum of ions and molecules from water, so it is the process most likely to be used. The maximum contaminant level for beta and gamma radioactivity is an annual dose equivalent to the total body or any organ not to exceed 4 m rem/year. The fate of radionuclides after removal from drinking water should be considered. Presently radium is disposed with other process wastes at softening plants removing radium. Confinement and disposal as a radioactive waste would be very expensive. (author)

Temperature dependent fission product removal efficiency due to pool scrubbing

Energy Technology Data Exchange (ETDEWEB)

Uchida, Shunsuke, E-mail: suchida@iae.or.jp [Institute of Applied Energy, 1-14-2, Nishi-Shimbashi, Minato-ku, Tokyo 105-0003 (Japan); Itoh, Ayumi; Naitoh, Masanori; Okada, Hidetoshi; Suzuki, Hiroyuki [Institute of Applied Energy, 1-14-2, Nishi-Shimbashi, Minato-ku, Tokyo 105-0003 (Japan); Hanamoto, Yukio [KAKEN, Inc., 1044, Hori-machi, Mito 310-0903 (Japan); Osakabe, Masahiro [Tokyo University of Marine Science & Technology, Koutou-ku, Tokyo 135-8533 (Japan); Fujikawa, Masahiro [Japan Broadcasting Corporation, 2-2-1, Jinnan, Shibuya-ku, Tokyo 150-8001 (Japan)

2016-03-15

Highlights: • Pool temperature effects on the FP removal were not clearly concluded in the previous publications. • It was confirmed that the removal efficiency decreased with temperature around the boiling point. • A modified empirical formula for FP removal was proposed as a function of sub-cooling temperature. • DF could be predicted with an accuracy within a factor of 2 with the proposed formula. - Abstract: The wet-well of boiling water reactors plays important roles not only to suppress the pressure in the primary containment vessel due to steam scrubbing effects during severe accidents but also to mitigate release of radioactive fission products (FP), aerosols and particulates, into the environment. The effects of steam scrubbing in the wet-well on FP removal have been well studied and reported by changing major parameters determining the removal efficiencies, e.g., aerosol diameters, submergence (depth of scrubbing nozzles) and steam/non-condensable gas volume fraction. Unfortunately, the effects of pool temperature on the FP removal were not clearly concluded in the previous publications, though it would be easily expected that boiling in the pool resulted in reduced aerosol removal efficiency. In order to determine the temperature effects on FP removal efficiency, amounts of cesium in aerosols released from scrubbing pool were measured by changing pool temperature in mini and medium scale scrubbing experiments, and then, it was confirmed that the removal efficiency clearly decreased with temperature around the boiling point. Then, a modified empirical formula to express the FP removal around the boiling point temperature was proposed as a function of sub-cooling temperature by applying the effective steam volume fraction, which was designated as the volume ratio of condensed steam in the pool versus the sum of input steam and non-condensable gas. By comparing the measured removal efficiency with the calculated, it was validated that the

Inferring invasive species abundance using removal data from management actions

Science.gov (United States)

Davis, Amy J.; Hooten, Mevin B.; Miller, Ryan S.; Farnsworth, Matthew L.; Lewis, Jesse S.; Moxcey, Michael; Pepin, Kim M.

2016-01-01

Evaluation of the progress of management programs for invasive species is crucial for demonstrating impacts to stakeholders and strategic planning of resource allocation. Estimates of abundance before and after management activities can serve as a useful metric of population management programs. However, many methods of estimating population size are too labor intensive and costly to implement, posing restrictive levels of burden on operational programs. Removal models are a reliable method for estimating abundance before and after management using data from the removal activities exclusively, thus requiring no work in addition to management. We developed a Bayesian hierarchical model to estimate abundance from removal data accounting for varying levels of effort, and used simulations to assess the conditions under which reliable population estimates are obtained. We applied this model to estimate site-specific abundance of an invasive species, feral swine (Sus scrofa), using removal data from aerial gunning in 59 site/time-frame combinations (480–19,600 acres) throughout Oklahoma and Texas, USA. Simulations showed that abundance estimates were generally accurate when effective removal rates (removal rate accounting for total effort) were above 0.40. However, when abundances were small (<50) the effective removal rate needed to accurately estimates abundances was considerably higher (0.70). Based on our post-validation method, 78% of our site/time frame estimates were accurate. To use this modeling framework it is important to have multiple removals (more than three) within a time frame during which demographic changes are minimized (i.e., a closed population; ≤3 months for feral swine). Our results show that the probability of accurately estimating abundance from this model improves with increased sampling effort (8+ flight hours across the 3-month window is best) and increased removal rate. Based on the inverse relationship between inaccurate abundances and

Temperature dependent fission product removal efficiency due to pool scrubbing

International Nuclear Information System (INIS)

Uchida, Shunsuke; Itoh, Ayumi; Naitoh, Masanori; Okada, Hidetoshi; Suzuki, Hiroyuki; Hanamoto, Yukio; Osakabe, Masahiro; Fujikawa, Masahiro

2016-01-01

Highlights: • Pool temperature effects on the FP removal were not clearly concluded in the previous publications. • It was confirmed that the removal efficiency decreased with temperature around the boiling point. • A modified empirical formula for FP removal was proposed as a function of sub-cooling temperature. • DF could be predicted with an accuracy within a factor of 2 with the proposed formula. - Abstract: The wet-well of boiling water reactors plays important roles not only to suppress the pressure in the primary containment vessel due to steam scrubbing effects during severe accidents but also to mitigate release of radioactive fission products (FP), aerosols and particulates, into the environment. The effects of steam scrubbing in the wet-well on FP removal have been well studied and reported by changing major parameters determining the removal efficiencies, e.g., aerosol diameters, submergence (depth of scrubbing nozzles) and steam/non-condensable gas volume fraction. Unfortunately, the effects of pool temperature on the FP removal were not clearly concluded in the previous publications, though it would be easily expected that boiling in the pool resulted in reduced aerosol removal efficiency. In order to determine the temperature effects on FP removal efficiency, amounts of cesium in aerosols released from scrubbing pool were measured by changing pool temperature in mini and medium scale scrubbing experiments, and then, it was confirmed that the removal efficiency clearly decreased with temperature around the boiling point. Then, a modified empirical formula to express the FP removal around the boiling point temperature was proposed as a function of sub-cooling temperature by applying the effective steam volume fraction, which was designated as the volume ratio of condensed steam in the pool versus the sum of input steam and non-condensable gas. By comparing the measured removal efficiency with the calculated, it was validated that the

Inferring invasive species abundance using removal data from management actions.

Science.gov (United States)

Davis, Amy J; Hooten, Mevin B; Miller, Ryan S; Farnsworth, Matthew L; Lewis, Jesse; Moxcey, Michael; Pepin, Kim M

2016-10-01

Evaluation of the progress of management programs for invasive species is crucial for demonstrating impacts to stakeholders and strategic planning of resource allocation. Estimates of abundance before and after management activities can serve as a useful metric of population management programs. However, many methods of estimating population size are too labor intensive and costly to implement, posing restrictive levels of burden on operational programs. Removal models are a reliable method for estimating abundance before and after management using data from the removal activities exclusively, thus requiring no work in addition to management. We developed a Bayesian hierarchical model to estimate abundance from removal data accounting for varying levels of effort, and used simulations to assess the conditions under which reliable population estimates are obtained. We applied this model to estimate site-specific abundance of an invasive species, feral swine (Sus scrofa), using removal data from aerial gunning in 59 site/time-frame combinations (480-19,600 acres) throughout Oklahoma and Texas, USA. Simulations showed that abundance estimates were generally accurate when effective removal rates (removal rate accounting for total effort) were above 0.40. However, when abundances were small (removal rate needed to accurately estimates abundances was considerably higher (0.70). Based on our post-validation method, 78% of our site/time frame estimates were accurate. To use this modeling framework it is important to have multiple removals (more than three) within a time frame during which demographic changes are minimized (i.e., a closed population; ≤3 months for feral swine). Our results show that the probability of accurately estimating abundance from this model improves with increased sampling effort (8+ flight hours across the 3-month window is best) and increased removal rate. Based on the inverse relationship between inaccurate abundances and inaccurate removal

Soil washing for brine removal

International Nuclear Information System (INIS)

Ayyachamy, J.S.; Atalay, A.; Zaman, M.

1992-01-01

During the exploration for oil and thereafter, brine transfer lines get ruptured releasing the brine which contaminates the surrounding soil. The salinity level in brine is very high, sometimes approaching or exceeding that of sea water. Soils contaminated with brine are unproductive and unsuitable for plant growth. Several investigators have documented the pollution of surface water and groundwater due to brine disposal from oil and needed to clean up such sites. The objective of this study is to develop a soil washing technique that can be used to remove brine sites were collected and used in the study. This paper reports on results which indicate that soil washing using various surface active agents is effective in removing the brine

Removal of hydrogen sulphide from pig house using biofilter with fungi

DEFF Research Database (Denmark)

Hansen, Michael J.; Pedersen, Claus L.; Søgaard Jensen, Louise H.

2018-01-01

was to investigate if this high removal could be due to the presence of fungi. The removal of reduced sulphur compounds in a 600-mm wide cellulose biofilter was measured at depths of 0, 200, 400 and 600 mm and the results compared with estimated fungal hyphae surface area per biofilm area. Over 19 months, removal...... of hydrogen sulphide was measured during periods with and without fungi. The results demonstrate a correlation between the fungal hyphae surface area and the removal of hydrogen sulphide with the highest removal in the first 200 mm of the biofilter and decreasing removal with depth. During periods...... area caused by the hyphae....

Color removal from dye-containing wastewater by magnesium chloride.

Science.gov (United States)

Gao, Bao-Yu; Yue, Qin-Yan; Wang, Yan; Zhou, Wei-Zhi

2007-01-01

Color removal by MgCl(2) when treating synthetic waste containing pure dyes was studied. The color removal efficiency of MgCl(2)/Ca(OH)(2) was compared with that of Al(2)(SO(4))(3), polyaluminum chloride (PAC) and FeSO(4)/Ca(OH)(2). The mechanism of color removal by MgCl(2) was also investigated. The experimental results show that the color removal efficiency of MgCl(2) is related to the type of dye and depends on the pH of the waste and the dosage of the coagulants used. Treatment of waste containing reactive dye or dispersed dye with MgCl(2) yielded an optimum color removal ratio when the pH of the solution was equal to or above 12.0. For both the reactive and dispersed dye waste, MgCl(2)/Ca(OH)(2) was shown to be superior to MgCl(2)/NaOH, Al(2)(SO(4))(3), PAC and FeSO(4)/Ca(OH)(2) for color removal. A magnesium hydroxide precipitate formed at pH values greater than 12.0, which provided a large adsorptive surface area and a positive electrostatic surface charge, enabling it to remove the dyes through charge neutralization and an adsorptive coagulating mechanism. So, the MgCl(2)/Ca(OH)(2) system is a viable alternative to some of the more conventional forms of chemical treatment, especially for treating actual textile waste with high natural pH.

Plasma polymer-functionalized silica particles for heavy metals removal.

Science.gov (United States)

Akhavan, Behnam; Jarvis, Karyn; Majewski, Peter

2015-02-25

Highly negatively charged particles were fabricated via an innovative plasma-assisted approach for the removal of heavy metal ions. Thiophene plasma polymerization was used to deposit sulfur-rich films onto silica particles followed by the introduction of oxidized sulfur functionalities, such as sulfonate and sulfonic acid, via water-plasma treatments. Surface chemistry analyses were conducted by X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectroscopy. Electrokinetic measurements quantified the zeta potentials and isoelectric points (IEPs) of modified particles and indicated significant decreases of zeta potentials and IEPs upon plasma modification of particles. Plasma polymerized thiophene-coated particles treated with water plasma for 10 min exhibited an IEP of less than 3.5. The effectiveness of developed surfaces in the adsorption of heavy metal ions was demonstrated through copper (Cu) and zinc (Zn) removal experiments. The removal of metal ions was examined through changing initial pH of solution, removal time, and mass of particles. Increasing the water plasma treatment time to 20 min significantly increased the metal removal efficiency (MRE) of modified particles, whereas further increasing the plasma treatment time reduced the MRE due to the influence of an ablation mechanism. The developed particulate surfaces were capable of removing more than 96.7% of both Cu and Zn ions in 1 h. The combination of plasma polymerization and oxidative plasma treatment is an effective method for the fabrication of new adsorbents for the removal of heavy metals.

Removal of phosphate from greenhouse wastewater using hydrated lime.

Science.gov (United States)

Dunets, C Siobhan; Zheng, Youbin

2014-01-01

Phosphate (P) contamination in nutrient-laden wastewater is currently a major topic of discussion in the North American greenhouse industry. Precipitation of P as calcium phosphate minerals using hydrated lime could provide a simple, inexpensive method for retrieval. A combination of batch experiments and chemical equilibrium modelling was used to confirm the viability of this P removal method and determine lime addition rates and pH requirements for greenhouse wastewater of varying nutrient compositions. Lime: P ratio (molar ratio of CaMg(OH)₄: PO₄‒P) provided a consistent parameter for estimating lime addition requirements regardless of initial P concentration, with a ratio of 1.5 providing around 99% removal of dissolved P. Optimal P removal occurred when lime addition increased the pH from 8.6 to 9.0, suggesting that pH monitoring during the P removal process could provide a simple method for ensuring consistent adherence to P removal standards. A Visual MINTEQ model, validated using experimental data, provided a means of predicting lime addition and pH requirements as influenced by changes in other parameters of the lime-wastewater system (e.g. calcium concentration, temperature, and initial wastewater pH). Hydrated lime addition did not contribute to the removal of macronutrient elements such as nitrate and ammonium, but did decrease the concentration of some micronutrients. This study provides basic guidance for greenhouse operators to use hydrated lime for phosphate removal from greenhouse wastewater.

Metallic artifact in MRI after removal of orthopedic implants

International Nuclear Information System (INIS)

Bagheri, Mohammad Hadi; Hosseini, Mehrdad Mohammad; Emami, Mohammad Jafar; Foroughi, Amin Aiboulhassani

2012-01-01

Objective: The aim of the present study was to evaluate the metallic artifacts in MRI of the orthopedic patients after removal of metallic implants. Subjects and methods: From March to August 2009, 40 orthopedic patients operated for removal of orthopedic metallic implants were studied by post-operative MRI from the site of removal of implants. A grading scale of 0–3 was assigned for artifact in MR images whereby 0 was considered no artifact; and I–III were considered mild, moderate, and severe metallic artifacts, respectively. These grading records were correlated with other variables including the type, size, number, and composition of metallic devices; and the site and duration of orthopedic devices stay in the body. Results: Metallic susceptibly artifacts were detected in MRI of 18 of 40 cases (45%). Screws and pins in removed hardware were the most important factors for causing artifacts in MRI. The artifacts were found more frequently in the patients who had more screws and pins in the removed implants. Gender, age, site of implantation of the device, length of the hardware, composition of the metallic implants (stainless steel versus titanium), and duration of implantation of the hardware exerted no effect in producing metallic artifacts after removal of implants. Short TE sequences of MRI (such as T1 weighted) showed fewer artifacts. Conclusion: Susceptibility of metallic artifacts is a frequent phenomenon in MRI of patients upon removal of metallic orthopedic implants.

Metallic artifact in MRI after removal of orthopedic implants.

Science.gov (United States)

Bagheri, Mohammad Hadi; Hosseini, Mehrdad Mohammad; Emami, Mohammad Jafar; Foroughi, Amin Aiboulhassani

2012-03-01

The aim of the present study was to evaluate the metallic artifacts in MRI of the orthopedic patients after removal of metallic implants. From March to August 2009, 40 orthopedic patients operated for removal of orthopedic metallic implants were studied by post-operative MRI from the site of removal of implants. A grading scale of 0-3 was assigned for artifact in MR images whereby 0 was considered no artifact; and I-III were considered mild, moderate, and severe metallic artifacts, respectively. These grading records were correlated with other variables including the type, size, number, and composition of metallic devices; and the site and duration of orthopedic devices stay in the body. Metallic susceptibly artifacts were detected in MRI of 18 of 40 cases (45%). Screws and pins in removed hardware were the most important factors for causing artifacts in MRI. The artifacts were found more frequently in the patients who had more screws and pins in the removed implants. Gender, age, site of implantation of the device, length of the hardware, composition of the metallic implants (stainless steel versus titanium), and duration of implantation of the hardware exerted no effect in producing metallic artifacts after removal of implants. Short TE sequences of MRI (such as T1 weighted) showed fewer artifacts. Susceptibility of metallic artifacts is a frequent phenomenon in MRI of patients upon removal of metallic orthopedic implants. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Removal of residual particulate matter from filter media

Science.gov (United States)

Almlie, Jay C; Miller, Stanley J

2014-11-11

A method for removing residual filter cakes that remain adhered to a filter after typical particulate removal methodologies have been employed, such as pulse-jet filter element cleaning, for all cleanable filters used for air pollution control, dust control, or powder control.

Removal of residual particulate matter from filter media

Energy Technology Data Exchange (ETDEWEB)

Almlie, Jay C.; Miller, Stanley J.

2018-01-09

A method for removing residual filter cakes that remain adhered to a filter after typical particulate removal methodologies have been employed, such as pulse-jet filter element cleaning, for all cleanable filters used for air pollution control, dust control, or powder control.

Removing lead from metallic mixture of waste printed circuit boards by vacuum distillation: factorial design and removal mechanism.

Science.gov (United States)

Li, Xingang; Gao, Yujie; Ding, Hui

2013-10-01

The lead removal from the metallic mixture of waste printed circuit boards by vacuum distillation was optimized using experimental design, and a mathematical model was established to elucidate the removal mechanism. The variables studied in lead evaporation consisted of the chamber pressure, heating temperature, heating time, particle size and initial mass. The low-level chamber pressure was fixed at 0.1 Pa as the operation pressure. The application of two-level factorial design generated a first-order polynomial that agreed well with the data for evaporation efficiency of lead. The heating temperature and heating time exhibited significant effects on the efficiency, which was validated by means of the copper-lead mixture experiments. The optimized operating conditions within the region studied were the chamber pressure of 0.1 Pa, heating temperature of 1023 K and heating time of 120 min. After the conditions were employed to remove lead from the metallic mixture of waste printed circuit boards, the efficiency was 99.97%. The mechanism of the effects was elucidated by mathematical modeling that deals with evaporation, mass transfer and condensation, and can be applied to a wider range of metal removal by vacuum distillation. Copyright © 2013 Elsevier Ltd. All rights reserved.

Internal deposition of radiostrontium and its removal

International Nuclear Information System (INIS)

George, G.A.; Mehdi, E.I.; Toma, N.A.

1979-01-01

The purpose of the investigation was to study the metabolism of 90 Sr relative to that of calcium and the possible procedures that might enhance its decorporation. One per cent only of an injected dose of the tracer was detected per 100 ml of blood 24 hours after the introduction of this isotope into the rabbit. This dropped to 0.01% 15 days later. Soft tissues contained 10% and 1% of the injected dose one day and 15 days after injection respectively, whereas the bone content reached 23.3% 15 days after tracer injection. In vitro removal experiments showed that a mixture of calcium and calciferol was the most potent agent, causing the removal of 81% of that found in the control animals. In vivo investigations supported the in vitro findings in the use of a calcium-vitamin D mixture, which removed 75% and 45% of the tracer from bones one and four days after isotope injection. These studies also pointed out the importance of time in treatment, and that it could have dramatic effects on the process of removal. The effects of different decorporating agents and their modes of action are also discussed in the paper. (author)

CPP-603 Chloride Removal System Decontamination and Decommissioning

International Nuclear Information System (INIS)

Moser, C.L.

1993-02-01

The CPP-603 (annex) Chloride Removal System (CRS) Decontamination and Decommissioning (D ampersand D) Project is described in this report. The CRS was used for removing Chloride ions and other contaminants that were suspended in the waters of the underwater fuel storage basins in the CPP-603 Fuel Receiving and Storage Facility (FRSF) from 1975 to 1981. The Environmental Checklist and related documents, facility characterization, decision analysis', and D ampersand D plans' were prepared in 1991. Physical D ampersand D activities were begun in mid summer of 1992 and were completed by the end of November 1992. All process equipment and electrical equipment were removed from the annex following accepted asbestos and radiological contamination removal practices. The D ampersand D activities were performed in a manner such that no radiological health or safety hazard to the public or to personnel at the Idaho National Engineering Laboratory (INEL) occurred

Ionic treatment for removal of sulfonamide and tetracycline classes of antibiotic

International Nuclear Information System (INIS)

Choi, Keun-Joo; Son, Hee-Jong; Kim, Seung-Hyun

2007-01-01

Self-decomposition and removal of antibiotics by ionic treatment was evaluated in this study. Seven sulfonamide classes (SA) and seven tetracycline classes (TA) of antibiotic were selected for this purpose. According to this study, self-decomposition of SAs and TAs was slow, and a considerable amount of antibiotics still remained after 15 days. Ionic treatment was effective for removal of SAs and TAs, but organic interference was observed. When dissolved organic (DOC) was present in raw water, the removal performance of antibiotics generally deteriorated due to competition with organics. SAs and TAs, which were present in ionic form at neutral pH, were removed through ion exchange. Their removal efficiencies were closely related to their chemical structure. Antibiotics with stronger electronegativity were easier to remove by ionic treatment. Equilibrium equations for removal of SAs and TAs by ionic treatment were also presented

MALDI-TOF Baseline Drift Removal Using Stochastic Bernstein Approximation

Directory of Open Access Journals (Sweden)

Howard Daniel

2006-01-01

Full Text Available Stochastic Bernstein (SB approximation can tackle the problem of baseline drift correction of instrumentation data. This is demonstrated for spectral data: matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF data. Two SB schemes for removing the baseline drift are presented: iterative and direct. Following an explanation of the origin of the MALDI-TOF baseline drift that sheds light on the inherent difficulty of its removal by chemical means, SB baseline drift removal is illustrated for both proteomics and genomics MALDI-TOF data sets. SB is an elegant signal processing method to obtain a numerically straightforward baseline shift removal method as it includes a free parameter that can be optimized for different baseline drift removal applications. Therefore, research that determines putative biomarkers from the spectral data might benefit from a sensitivity analysis to the underlying spectral measurement that is made possible by varying the SB free parameter. This can be manually tuned (for constant or tuned with evolutionary computation (for .

Assessment of active methods for removal of LEO debris

Science.gov (United States)

Hakima, Houman; Emami, M. Reza

2018-03-01

This paper investigates the applicability of five active methods for removal of large low Earth orbit debris. The removal methods, namely net, laser, electrodynamic tether, ion beam shepherd, and robotic arm, are selected based on a set of high-level space mission constraints. Mission level criteria are then utilized to assess the performance of each redirection method in light of the results obtained from a Monte Carlo simulation. The simulation provides an insight into the removal time, performance robustness, and propellant mass criteria for the targeted debris range. The remaining attributes are quantified based on the models provided in the literature, which take into account several important parameters pertaining to each removal method. The means of assigning attributes to each assessment criterion is discussed in detail. A systematic comparison is performed using two different assessment schemes: Analytical Hierarchy Process and utility-based approach. A third assessment technique, namely the potential-loss analysis, is utilized to highlight the effect of risks in each removal methods.