WorldWideScience

Sample records for proses pertukaran ion

  1. Komputasi Data Isotermal Reaksi Pertukaran Ion

    Directory of Open Access Journals (Sweden)

    Sumarbagiono Sumarbagiono

    2017-03-01

    Full Text Available Sebagian besar data penelitian yang masih bersifat teknis perlu dievaluasi lebih lanjut denganmenggunakan metode komputasi Data Isotermal Reaksi Pertukaran Ion dalam proses penyerapanlogam berat dan radionukleotida oleh material sorben dari limbah cair. Melalui perhitungan KonstantaKesetimbangan (Ka dan Kuotisi Kielland diperoleh nilai entropi dan entalpi yang dapat digunakanuntuk mengetahui selektifitas unsur yang teradsorsi dalam zeolit. Program Kielland denganmenggunakan Delphi 5 dapat digunakan secara praktis oleh para peneliti untuk menganalisa dataisothermal pertukaran ion dari reaksi kesetimbangan dengan menghasilkan data yang lebih baik.

  2. KARAKTERISASI PERTUKARAN ION TIMBAL (II DENGAN KALSIUM PADA PROSES BIOSORPSI ALGA HIJAU CLADOPHORA FRACTA

    Directory of Open Access Journals (Sweden)

    Ade Wirli Putra

    2016-05-01

    Full Text Available ABSTRAKKarakterisasi pertukaran ion Pb2+ dengan Ion Ca2+ dalam larutan menggunakan proses biosorbsi dengan biomassa alga hijau cladofora fracta  telah diteliti.  Penelitian ini bertujuan untuk mengetahui selektifitas pertukaran pertukaran ion Pb2+  dengan ion Ca2+ dan sebaliknya, Pengaruh pH eluen terhadap desorpsi  ion Pb2+  dan adsorpsi Ion Ca2+, Karakterisasi desorpsi  Ion Ca2+ dan  Ion Pb2+ dengan larutan HNO3 0,1 M dan H2O akan diamati pada penelitian ini. Hasil penelitian yang diperoleh memperlihatkan bahwa proses pertukaran ion Ca2+ dengan ion Pb2+ lebih mudah terjadi dibandingkan pertukaran ion Pb2+ dengan Ca2+. Desorpsi  ion Pb2+ relatif rendah saat pH eluen sama dengan pH optimum biosorpsi  ion  Pb2+ (pH 4,0. Pada pH 5,0 kemungkinan terjadi endapan  timbal (II hidroksida ( Pb(OH2 .  Penyerapan  ion Ca2+, yang terdapat  dalam eluen, lebih besar terjadi pada pH yang lebih tinggi (pH 5,0. Desorpsi ion Pb2+ dengan larutan HNO3 0,1M dan H2O memperlihatkan hasil yang berbeda (masing-masing  28,10% dan 15,56%, sedangkan desorpsi ion Ca2+ dengan  larutan HNO3 0,1M dan H2O tidak memperlihatkan berbeda yang signifikan (masing-masing 37,91% dan 34,75%, sehingga larutan HNO3 0,1M sebagai eluen pendesorpsi ion Pb2+ dari biosorben lebih efektif dibandingkan eluen H2O.  ABSTRACTCharacterization of  Pb 2+ ion exchange with Ca2 + ions using the process biosorbtion with green algae biomass Cladofora fracta been investigated. This study aims to determine the selectivity of the exchange ion exchange Pb 2+ ions with Ca2 + and vice versa, Effect of pH eluent to desorption of ions Pb 2+ and adsorption of ions Ca2 +, Characterization desorption of ions Ca2 + and Ion Pb 2+ with a solution of HNO3 0.1 M and H2O will be observed in this study. The results obtained showed that the Ca2 + ion exchange process with Pb 2+ ions more readily than Pb 2+ ion exchange with Ca2 +. Desorption of Pb 2+ ion is relatively low at the same eluent pH with a p

  3. Kerangka Investigasi Forensik Pada Peladen Pertukaran Berkas Samba Berdasarkan SNI ISO/IEC 27037:2014

    Directory of Open Access Journals (Sweden)

    Dedy Haryadi

    2017-07-01

    Full Text Available Network File System (NFS dan Common Internet File System (CIFS merupakan protokol yang biasa dipakai dalam melakukan pertukaran berkas di dalam sebuah jaringan komputer yang terhubung dengan Network Attached Storage. Mudahnya dalam bertukar berkas dalam sebuah jaringan tidak menutup kemungkinan adanya pertukaran berkas yang bersifat ilegal ataupun berkas yang mengandung tindak kejahatan. Oleh karena itu, diperlukan sebuah model pendekatan investigasi forensik dalam proses pertukaran berkas di sebuah jaringan komputer. Proses akuisisi dalam penelitian ini dilakukan dengan 2 model, yaitu: akuisisi secara langsung pada mesin peladen file-sharing dan akuisisi secara langsung melalui jaringan. Akuisisi secata langsung pada mesin peladen berfokus pada proses akuisisi log dari mesin peladen yang dihasilkan dari layanan samba dan direktori pertukaran berkas. Akusisi secara langsung melalui jaringan berfokus pada direktori pertukaran berkas yang diakses oleh pengguna. Model akuisisi ini berdasarkan SNI ISO/IEC 27037:2014 tentang Pedoman Identifikasi, Pengumpulan, Akuisisi dan Preservasi Bukti Digital yang fokus pada barang bukti elektronik kritis dengan kondisi tidak diperkenankan mati atau shutdown.

  4. Sistem Pendukung Keputusan Dalam Penentuan Pertukaran Pelajar Di Sma Negeri 2 Tasikmalaya Dengan Metode Analytical Hierarchy Process (Ahp

    Directory of Open Access Journals (Sweden)

    Teuku Mufizar

    2017-07-01

    Full Text Available SMAN 2 Tasikmalaya adalah salah satu sekolah yang terpilih sebagai mitra Universitas Pendidikan Indonesia dalam program pertukaran pelajar ke Australia. Dalam proses pemilihan dan penilaian peserta saat ini masih belum efektif ,hal ini mengakibatkan keraguan dalam pengambilan keputusan yang memungkinkan terjadi kesalahan keputusan yang kurang tepat. Peserta yang terpilih kadang jauh dari yang diharapkan karena peserta tersebut tidak memiliki kriteria yang layak. Maka dari itu diperlukan sebuah sistem pendukung keputusan yang bisa mengoptimalkan dalam penentuan pertukaran pelajar. dalam sistem pendukung keputusan ini didukung oleh suatu metode dalam pengambilan keputusan yaitu metode Analytical Hierarchy Process (AHP yang dikonversikan kedalam bahasa pemrograman Visual Basic.NET yang dapat menunjang dalam pengolahan data. alat bantu pemodelan sistemnya menggunakan Data Flow Diagram (DFD, sedangkan teknik perancangan basisdata menggunakan Entity Relationship Diagram (ERD. Adapun Kriteria yang ditetapkan oleh sekolah diantaranya : Nilai Toefl, Ranking, Nilai Wawancara, Nilai Pengetahuan Indonesia, Nilai Pengetahuan Australia, Nilai Kesenian, Nilai Kepribadian. Hasil akhir dari penelitian ini didapatkan bahwa sistem pendukung keputusan dalam penentuan pertukaran pelajar di SMA Negeri 2 tasikmalaya dengan metode Analytical Hierarchy Process (AHP dapat membantu pengambil keputusan dalam menentukan peserta yang terpilih.

  5. APLIKASI PENGOLAHAN POLUTAN ANION KHROM(VI DENGAN MENGGUNAKAN AGEN PENUKAR ION HYDROTALCIT ZN-AI-SO4 (Synthesis of and its Application to Treat Chrom(VI Pollutant Using Hydrotalcite Zn-Al_SO4 as Anion Exchanger

    Directory of Open Access Journals (Sweden)

    Roto Roto

    2009-03-01

    Full Text Available ABSTRAK Keberadaan logam khrom di dalam sistem perairan bersifat polutan yang harus ditangani dengan baik, dan untuk khrom (Vl yang sering dijumpai dalam bentuk anion dapat diolah dengan menggunakan mekanisme pertukaran ion. Suatu agen penukar anion telah dibuat berupa senyawa hidrotalsit Zn-Al-SOa melalui proses sintesis, karakterisasi serta dilakukan pula pengujian aplikasinya untuk pengurangan polutant anion khrom (VI dalam bentuk ion dikromat. Sintesis hidrotalsit Zn-Al-SOa dilakukan dengan metode stoikiometri pada pH 8 dan perlakuan hidrotermal. Aplikasi pertukaran dikromat dengan anion sulfat dalam antar lapis hidrotalsit serta uji regenerasi bahan diamati dengan bantuan analisis struktur dan analisis kinetika reaksi pertukaran. Produk pertukaran ion dikarakterisasi dengan XRD, spektrofotometri IR dan spektrometri serapan atom. Rumus kimia hidrotalsit produk diketahui adalah Zn0,74Al0,26(OH1,74(SO40,13.0,52H2O. Anion dikromat dapat menukar sulfat dalam antarlapis hidrotalsit yang ditunjukkan dalam spektra IR dan pola XRD. Kapasitas pertukaran anion untuk dikromat diketahui 216,84 mek/100 g, sedangkan kinetika reaksi pertukaran ion mengikuti orde dua dengan k = 3 x 10-8 ppm-1.detik-1. Hasil menunjukkan Zn-Al-Cr2O7 dapat mudah diregenerasi.    ABSTRACT  Chrom as pollutant in aquatics system usually establishes as crom (VI and should be worked with special treatment and as an example is ion exchanger. Material Zn-Al-SO4 hydrotalcite product have been synthesized and its application as anion exchanger for dichromate have been studied. Synthesis of Zn-Al-SO4 hydrotalcite was carried out by stoichiometric method at pH 8 and hydrothermal treatment. Sulphate in hydrotalcite interlayer was exchanged by dichromate. Kinetics of ion exchange was also investigated. The product of ion exchange was characterized by XRD, IR spectrophotometry and atomic adsorption  spectrometry. The chemical formula of the  hydrotalcite is Zn0.74Al0.26(OH1.74(SO4 0

  6. Imobilisasi TiO2 ke dalam Resin Penukar Kation dan Aplikasinya sebagai Fotokatalis dalam Proses Fotoreduksi Ion Hg2+

    Directory of Open Access Journals (Sweden)

    Rosyid Ridho

    2017-03-01

    Full Text Available Abstrak Dalam rangka mengembangkan bahan fotokatalitis TiO2 pada penelitian ini telah dilakukan preparasi fotokatalis TiO2-Resin yang disertai dengan karakterisasi dan uji aktivitas untuk proses fotoreduksi ion Hg(II. Preparasi imobilisasi ini dilakukan dengan metode pertukaran ion yang di ikuti dengan kalsinasi pada suhu tertentu. Pada preparasi telah dipelajari pengaruh konsentrasi Titanium Isopropoksida sebagai sumber ion Ti(IV terhadap TiO2-Resin yang dikarakterisasi dengan menggunakan Difraksi Sinar X (XRD dan Thermografimetri (TGA. Pada proses fotoreduksi ion Hg(II dipelajari pengaruh massa fotokatalis, kadar TiO2 yang terimobilisasi ke dalam resin, konsentrasi Ion Hg(II, dan pengaruh pH. Proses fotoreduksi dilakukan dalam suatu reaktor tertutup yang dilengkapi dengan lampu UV, yaitu dengan cara menyinari campuran yang terdiri dari larutan ion Hg(II dan serbuk fotokatalis TiO2-Resin, disertai dengan pengadukan selama waktu tertentu. Hasil fotoreduksi dihitung berdasarkan selisih antara konsentrasi ion Hg(II awal dengan ion Hg(II yang tak tereduksi. Penentuan konsentrasi ion Hg(II yang tak tereduksi dilakukan dengan menggunakan Spektrofotometer Serapan Atom (SSA teknik pembangkitan uap dingin atau Cold Vapor Atomic Absorption Spectrophotometry(CV-AAS. Hasil preparasi menunjukkan semakin tinggi konsentrasi Titanium Isopropoksida yang ditambahkan pada resin semakin tinggi juga kadar TiO2 yang terbentuk pada TiO2-Resin. Hasil uji fotokatalis menunjukkan bahwa penggunaan fotokatalis TiO¬2-Resin dapat meningkatkan hasil fotoreduksi ion Hg(II yang peningkatannya lebih tinggi dibandingkan TiO2 serbuk. Penambahan fotokatalis dengan massa yang semakin besar menambah efektivitas fotoreduksi terhadap ion Hg(II yang semakin besar, namun jika ditambahkan massa fotokatalis yang lebih tinggi lagi akan menurunkan efektivitas fotoreduksi terhadap ion Hg(II. Kenaikan konsentrasi Hg(II menyebabkan efektivitas fotoreduksi semakin rendah. Pada pH 1-4 terjadi

  7. Pengembangan Teknologi Informasi Mobile Learning Universitas Diponegoro Berbasis Android

    Directory of Open Access Journals (Sweden)

    Yohanes Jati Pamungkas

    2014-11-01

    Full Text Available Kebutuhan pengajar dan mahasiswa Universitas Diponegoro akan kemudahan pertukaran informasi untuk menunjang kegiatan perkuliahan saat ini menjadi hal yang penting. Dengan adanya kemudahan bertukar informasi dalam proses perkuliahan maka juga akan meningkarkan mutu pendidikan pada sebuah Perguruan Tinggi. Salah satu cara yang dapat digunakan untuk memudahkan proses perkuliahan adalah dengan pemanfaatan aplikasi pada perangkat bergerak untuk menunjang kebutuhan pengajar dan mahasiswa. Aplikasi mobile learning merupakan aplikasi berbasis perangkat bergerak yang bertujuan untuk menunjang proses belajar mengajar. Dengan adanya mobile learning maka pengajar dan siswa dapat melakukan kegiatan belajar diamanapun dan kapanpun. Aplikasi Undip M-Learning merupakan sebuah aplikasi yang bersifat client-server yang berjalan pada perangkat bergerak yang menggunakan sistem operasi android. Pada sisi server aplikasi dikembangkan dengan platform java enterprise dan database MySQL. Pada sisi client aplikasi dikembangkan untuk platform android yang berkomunikasi dengan aplikasi server dengan menggunakan JSON untuk melakukan pertukaran data. Aplikasi mobile learning memiliki berbagai fungsi antara lain untuk mengelola materi kuliah, tugas, kuis, dan nilai yang dapat di akses baik oleh mahasiswa maupoun dosen. Aplikasi dapat berjalan pada platform android mulai dari versi 2.3 hingga 4.4.

  8. Rancang Bangun Aplikasi “Collaborative Project Scheduler” Berbasis Mobile Web

    Directory of Open Access Journals (Sweden)

    I Gusti Agung Oka Widiarsana

    2015-08-01

    Full Text Available Kegagalan pencapaian target pada proyek dapat terjadi karena kurangnya perencanaan serta lemahnya pengawasan di dalam proses pengerjaan proyek. Perkembangan teknologi saat ini khususnya web memungkinkan untuk mengembangkan aplikasi manajemen proyek berbasisweb.Collaborative Project Scheduler merupakan sistem manajemen proyek berbasis websederhana, sehingga mudah untuk dipahami dan secara umum sesuai standar konsep manajemen proyek dapat membantu pengguna dalam menangani proyek. Aplikasi dikembangkan menggunakan HTML5, dengan konsep responsive design sehingga aplikasi dapat diakses dengan berbagai perangkat. Pertukaran data pada aplikasi ditunjang dengan AJAX Push sehingga pertukaran data komunikasi seperti chat akan bersifat realtime. Aplikasi dilengkapi dengan beberapa fitur komunikasi sehingga dapat menunjang keperluan komunikasi individual maupun kelompok di dalam proses pengerjaan proyek.Pengujian menggunakan kuesioner yang berisi serangkaian pernyataan mengenai kepuasan penggunaan dan penilaian aplikasi yang diisi oleh 36 responden memberikan persentasi hasil 95,37% yang termasuk pada kategori sangat baik. Kata kunci: Manajemen Proyek, Aplikasi Kolaborasi, ResponsiveWebsite, AJAXPush, HTML5

  9. Analisa Pengaruh Komunikasi Internal, Intrinsic Rewards Dan Recognition Terhadap Employee Engagement Di Surabaya Suite Hotel

    OpenAIRE

    Lorensia, Ines Margaretha; Ngo, Diana Kartika; Widjaja, Debora

    2015-01-01

    Penelitian ini dilakukan untuk menganalisa pengaruh komunikasi internal, intrinsic rewards, dan recognition terhadap employee engagementdi SurabayaSuiteHotel. Employee engagement penting untuk meningkatkan kinerja karyawan demi keberhasilan organisasi. Komunikasi internal adalah proses pertukaran informasi dalam internal organisasi. Intrinsic rewards adalah kepuasan pribadi dari pekerjaan itu sendiri. Dan recognition adalah pengakuan yang diberikan atas kinerja karyawan. Teknik analisa yang d...

  10. Seminar dan Wokshop Jurnalistik Anak SMA “Yournalism”

    OpenAIRE

    T.R, Amal Gamasi; Nugroho, Adi; Setyabudi, Djoko

    2013-01-01

    PENDAHULUANMasyarakat Indonesia saat ini merupakan masyarakat informasi yangmenghabiskan sebagian besar waktunya dengan media komunikasi dan menggunakanteknologi informasi seperti ponsel dan komputer maupun laptop. Mereka akan mudahmelakukan pertukaran data informasi karena saat ini,mengingat konvergensi mediatidak hanya mengubah basis data dan medium yang menyalurkannya, tetapi jugasecara keseluruhan mengubah proses produksi, pengolahan, dan distribusi informasisehingga media-media seperti k...

  11. PROSES KOGNITIF DALAM UNGKAPAN METAFORIS

    Directory of Open Access Journals (Sweden)

    deli - Nirmala

    2014-09-01

    Full Text Available PROSES KOGNITIF DALAM  UNGKAPAN METAFORIS Deli Nirmala deliundip@gmail.com Abstract Speech is produced through cognitive or psychological process, physiological process, and physical process (de Saussure, 1959. The cognitive process is the focus of this study especially in producing metaphorical expressions. This paper is trying to elaborate how the cognitive process happens when someone is producing metaphorical expressions. The data used for explaining the cognitive process are the metaphorical expressions found in bahasa Indonesia. The data were collected randomly from the sources like conversation, news, or bahasa Indonesia used in Indonesian newspapers. The method used is observation and intuition. To analyze, I used identity method, distributional method, and reflective-introspective methods. The result shows that the cognitive process in producing metaphorical process is done by using associative strategies by showing the correspondences between the source concept and the target concept. The correspondences found are those in embodied experiences, characters, functions, characteristics, and strenghts.   Proses menghasilkan tuturan meliputi proses kognitif, fisiologis, dan fisik (de Saussure, 1959. Proses kogntif menjadi fokus dalam tulisan ini khususnya dalam proses menghasilkan ungkapan metaforis. Dalam tulisan ini, saya akan mencoba mengungkap bagaimana proses kognitif terjadi ketika seseorang menghasilkan ungkapan metaforis. Data yang dijadikan dasar dalam menjelaskan proses kognitif adalah ungkapan metaforis dalam bahasa Indonesia. Data dipilih secara random dari sumber berupa percakapan, berita, bahasa di surat kabar. Metode yang digunakan adalah metode observasi dan intuisi. Untuk menganalisis, saya menggunakan metode padan, distribusional, dan reflektif-introspektif. Hasil analisis menunjukkan bahwa proses kognitif dalam menghasilkan ungkapan metaforis dilakukan dengan strategi asosiatif dengan menunjukkan korespondensi

  12. EVALUASI CSE-UCLA PADA STUDI PROSES PEMBELAJARAN MATEMATIKA

    Directory of Open Access Journals (Sweden)

    Siska Andriani

    2015-12-01

    Full Text Available tandar proses merupakan salah satu standar nasional yang mengatur perencanaan, pelaksanaan, penilaian, dan pengawasan proses pembelajaran. Pelaksanaan standar proses yang terjadi di lapangan belum terlihat keterlaksanaannya. Tujuan penelitian ini yaitu memperoleh deskripsi keterlaksanaan standar proses pada proses pembelajaran matematika menggunakan analisis CSE-UCLA di SMP Negeri Satu Atap Lerep. Penelitian ini merupakan penelitian kualitatif dengan pendekatan evaluatif. Sumber data utama adalah guru matematika. Teknik pengumpulan data menggunakan wawancara, observasi, dan dokumentasi. Keabsahan data yang digunakan dalam penelitian ini menggunakan uji credibility (triangulasi dan kecukupan bahan referensi, uji transferability, dan uji dependability.  Hasil penelitian menunjukkan bahwa proses pembelajaran matematika di SMP Negeri Satu Atap Lerep sudah mengikuti standar proses. Implementasi standar proses dengan analisis CSE-UCLA menunjukkan bahwa standar proses dilaksanakan melalui tahap  perencanaan, pengembangan, implementasi, hasil dan dampak. Dampak yang muncul pembelajaran yang terjadi tidak maksimal. Selain itu, banyak faktor yang mempengaruhi implementasi standar proses pada pembelajaran matematika di SMP Negeri Satu Atap Lerep. Faktor-faktor tersebut berupa faktor pendukung dan faktor penghambat.

  13. PENGARUH VARIASI SUHU PADA PROSES SELF TEMPERING DAN VARIASI WAKTU TAHAN PADA PROSES TEMPERING TERHADAP SIFAT MEKANIS BAJA AISI 4140

    Directory of Open Access Journals (Sweden)

    Sunardi Sunardi

    2016-07-01

    Full Text Available Tujuan penelitian ini adalah untuk mengetahui sifat mekanis pada baja AISI 4140 dengan proses tempering dengan variasi waktu tahan dan variasi suhu pada proses self tempering. Material terlebih dahulu dipanaskan pada suhu 850°C, di tahan dengan waktu 14 dan 28 menit, media pendinginan adalah Oli SAE 20. Pada proses tempering baja dipanaskan kembali dengan suhu 200°C di tahan dengan waktu 30 dan 120 menit. Sedangkan untuk proses self tempering, baja di panaskan pada suhu 850°C di tahan dengan waktu 14 dan 28 menit kemudian didinginkan, suhu yang harus dicapai pada pendinginan adalah 200°C, 400°C dan 600°C. Proses tempering dengan variasi waktu tahan mempunyai nilai kekerasan terbesar 50,1 HRC dengan waktu tahan 120 menit, sedangkan nilai kekerasan terbesar pada proses self tempering dengan variasi suhu adalah 29,68 HRC pada suhu 200°C. Nilai ketangguhan terbesar pada saat proses tempering adalah 0,341 (J/mm2 dengan waktu tahan 120 menit, sedangkan pada saat proses self tempering ketangguhan terbesar pada suhu 600°C dengan nilai 0,375 (J/mm2. Laju korosi terbesar pada saat tempering adalah 0,055 (mpy dengan waktu tahan 30 menit, sedangkan pada saat proses self tempering laju korosi terbesar pada suhu 400°C dengan nilai 0,0388 (mpy. 

  14. The sudden success of prose

    DEFF Research Database (Denmark)

    Mortensen, Lars Boje

    2017-01-01

    The article presents a new model for understanding the sudden success of prose in four literatures: Greek, Latin, French and Old Norse. Through comparison and quantitative observations, and by focusing on the success of prose rather than its invention, it is shown that in all four cases two...... reading aloud) has been underplayed in previous scholarship mostly focused on authorial choices and invention. For two of the literatures (Greek, French) the fast dynamics of the rise of prose has already been identified and discussed, but for the two others (Latin, Old Norse), the observation is new....... It is also suggested that the exactly contemporary rise of French and Old Norse prose (c. 1200-1230) most probably is connected. The four literatures are each shown in chronological charts so as to visualize the timeline and the relation between poetic and prosaic works. The article furthermore reflects...

  15. Analisis Jaringan VPN Menggunakan PPTP dan L2TP

    Directory of Open Access Journals (Sweden)

    Syariful Ikhwan

    2017-08-01

    Full Text Available VPN adalah teknologi yang membuat jaringan private (pribadi dengan menggunakan jaringan publik agar proses pertukaran data menjadi aman. Teknologi VPN biasanya diterapkan untuk koneksi antara kantor pusat dan kantor cabang. Dinhubkominfo Kabupaten Banyumas sebagai tempat penelitian memiliki beberapa kantor cabang (SKPD. Data yang dipertukarkan antar kantor cabang pada Dinhubkominfo terdiri dari beberapa jenis, namun pada penelitian ini hanya difokuskan pada pertukaran layanan FTP. Teknologi vpn yang saat ini digunakan pada jaringan Dinhubkominfo adalah PPTP. Akan tetapi, penggunaan teknologi tersebut belum tersebut masih belum diketahui tingkat performansi jaringan dibandingkan dengan penggunaan teknologi vpn yang lain. Pada penelitian ini akan dibandingkan penggunaan dua teknologi vpn yang berbeda yaitu antara PPTP dan L2TP, dimana parameter yang digunakan adalah throughput, delay, jitter, dan packet loss. Proses pengambilan data dilakukan dengan menambahkan beban trafik sebesar 512 kbps, 1024 kbps, dan 2048 kbps. Dari hasil penelitian diperoleh data bahwa, rata-rata nilai Delay pada L2TP lebih besar hingga 41% dibanding saat menggunakan PPTP, rata-rata Throughput PPTP naik hingga 34% dibandingkan L2TP, Rata-rata Jitter pada PPTP lebih besar hingga 44% dibandingkan L2TP, sedangkan packet loss yang terjadi pada masing-masing layanan vpn adalah 0

  16. Kajian Produksi Bersih Proses Elektroplating Emas pada Perhiasan Imitasi

    Directory of Open Access Journals (Sweden)

    Surti Indriastuti

    2016-04-01

    Full Text Available Proses electroplating emas pada barang perhiasan imitasi adalah proses melpisi permukaan perhiasan imitasi yang berupa gelang tembaga dengan bahan pelapis emas, dengan bantuan arus litrik. Proses ini menggunakan media pelapisan larutan elaktrolit emas Kau(CN2. Tahapan proses electroplating meliputi: pencucian gelang tembaga, pembilasan awal, proses electroplating, pembilasan akhir, pengeringan.Kajian Produksi Bersih (PB yang dilakukan pada proses tersebut yaitu dengan mengganti  bahan masukan, memperpanjang umur larutan elektrolit emas dilakukan minimasi drag out, pengaturan proses dan peralatan. Mengganti bahan masukan meliputi: air alam diganti aquades, emas berkadar di bawah 24 karat diganti dengan emas berkadar 24 karat (murni, bahan pencuci HCl/H2SO4 diganti dengan asam jawa/lerak. Memperpanjang larutan elektrolit emas dengan jalan: penyaringan, penambahan unsur kimia, pengurangan drag in. Minimasi drag out dengan jalan: menampung drag out. Pengaturan proses dan peralatan meliputi penataan layout peralatan, pemisahan proses basah dan kering, pembuangan limbah langsung ke saluran pembuangan.Hasil kajian memberikan simpulan bahwa penerapan prouksi bersih pada proses electroplating barang perhiasan dapat meningkatkan efisiensi dan kualitas produk, mengurangi kuantitas dan meningkatkan kualitas limbah, menurunkan produk rejek dari 10% menjdai 5%. Kata kunci: electroplating, produksi bersih

  17. ANALISA KARAKTERISTIK MINYAK PLASTIK HASIL DUA KALI PROSES PIROLISIS

    Directory of Open Access Journals (Sweden)

    Untung Surya Dharma

    2015-06-01

    Full Text Available Limbah plastik dapat dimanfaatkan sebagai bahan baku minyak plastik dengan menggunakan proses pirolisis. Minyak plastik yang dihasilkan dapat dimanfaatkan sebagai zat aditif atau campuran bahan bakar pada mesin. Pada Penelitian ini, proses pembuatan minyak plastik menggunakan dua kali proses pirolisis. Suhu reaktor pada proses pirolisis yang pertama dan kedua berbeda berturut-turut yaitu 200 oC dan 150 oC. Dari hasil penelitian ini diketahui bahwa pada proses pirolisis pertama dengan suhu reaktor 200 oC, dari 25 kg bahan baku menghasilkan 15,5 liter minyak plastik dalam waktu 80 jam. Sedangkan pada proses pirolisis kedua dengan suhu reaktor 150 oC, dari 15 liter minyak plastik dari hasil proses pirolisis pertama menghasilkan 11,6 liter minyak plastik dalam waktu 3,33 Jam. Adapun karakter minyak plastik yang dihasilkan adalah massa jenis 771,4 kg/m3, Viskositas 0,501 m2/s dan Nilai kalor 10518 kJ/kg

  18. Implementasi Proses Bisnis pada Perusahaan Retail Menggunakan Software Adempiere

    Directory of Open Access Journals (Sweden)

    Deria Dwi Antari

    2016-01-01

    Full Text Available Sistem Enterprise Resource Planning (ERP merupakan sebuah aplikasi sistem informasi terintegrasi yang dapat digunakan untuk pengelolaan dan integrasi proses bisnis perusahaan. Perusahaan retail memiliki beberapa departemen dan menangani transaksi dalam jumlah banyak dalam satu waktu, sehingga penerapan sistem ERP sangat bermanfaat bagi perusahaan tersebut. Sistem ERP dapat mempermudah penyaluran informasi antar departemen karena menggunakan satu logical basis data. Adempiere merupakan software ERP open source yang dapat digunakan untuk pengelolaan proses bisnis menjadi suatu sistem informasi terintegrasi. Proses bisnis yang diimplementasikan adalah proses bisnis pembelian, penjualan, pergudangan, dan akunting. Hasil akhir dari penelitian ini adalah rekomendasi sistem informasi terintegrasi dengan pemodelan proses bisnis perusahaan menggunakan software Adempiere. Proses bisnis existing menjadi terintegrasi dan lebih bersifat otomatis.   Kata Kunci: sistem informasi terintegrasi, enterprise resource planning, Adempiere

  19. Model Metric untuk Mengukur Fleksibilitas Model Proses Bisnis

    Directory of Open Access Journals (Sweden)

    Endang Wahyu Pamungkas

    2014-10-01

    Full Text Available Abstrak Organisasi bisnis dunia saat ini banyak memanfaatkan sistem informasi digital untuk memberikan pemahaman mengenai manajemen proses bisnis yang mereka jalani. Pemanfaatan sistem Enterprise Resource Planning (ERP merupakan contoh teknologi dalam manajemen proses bisnis. Melalui sistem ini perusahaan dapat membangun dan mengembangkan proses bisnis. Selain itu, perusahaan juga dapat menyesuaikan proses bisnis secara cepat terhadap perubahan yang terjadi seiring bertambahnya kebutuhan dan informasi, berubahnya kondisi pasar, atau perubahan kebijakan. Sehubungan dengan perubahan proses bisnis yang sering terjadi, maka aspek fleksibilitas terhadap model proses yang dibangun harus ditingkatkan. Dalam mendukung peningkatan fleksibilitas tersebut tentunya dibutuhkan sebuah model untuk mengukur tingkat flesibelitas model proses bisnis. Model tersebut yang kemudian dapat digunakan oleh analis untuk melakukan perbandingan sehingga dapat diperoleh model proses bisnis yang paling fleksibel dan cocok dengan perusahaan. Hal ini dapat dianalisa dengan melibatkan aspek-aspek fleksibel yang telah diteliti pada penelitian-penelitian sebelumnya. Dalam paper ini akan dilakukan penelitian mengenai aspek fleksibitas dalam model proses bisnis untuk menghasilkan model metric yang dapat melakukan kuantifikasi tingkat fleksibilitas pada model proses bisnis. Model metric yang dihasilkan pada penelitian ini mampu melakukan perhitungan fleksibelitas pada model proses bisnis secara kuantitatif. Kata kunci: ERP, fleksibilitas, metadata, model metric, model proses bisnis, variasi Abstract Recently, business organizations in the world are making use of digital information systems to provide an understanding of the business process management in which they live. Utilization of Enterprise Resource Planning (ERP system is an example of technology in business process management. Through this system, some companies can build and develop business process and can quickly adjust

  20. PROSES BRAZING Cu-Ag BERBAHAN BAKAR BIOGAS TERMURNIKAN

    Directory of Open Access Journals (Sweden)

    Ali Kusrijadi

    2015-01-01

    Full Text Available Pemanfaatan biogas sebagai salah satu alternatif bahan bakar  pada proses brazing merupakan langkah diversifikasi biogas, yang diharapkan dapat meningkatkan tingkat efisiensi dan keramahan teknologi. Permasalahan yang bersifat teknis dan menjadi kendala dalam pemanfaatan biogas ini adalah rendahnya konsentrasi CH4 dikarenakan adanya pengotor utama berupa air, karbondioksida dan asam disulfida. Penelitian dilakukan melalui dua tahap yaitu  tahap  pressureized storage process meliputi pemisahan komponen pengotor yang terdapat dalam biogas melalui teknik absorbsi sehingga dihasilkan biogas yang berkualitas gas alam terbarukan dan proses injeksi ke dalam suatu tangki penyimpanan, dan tahap selanjutnya adalah menggunakan biogas tersebut pada proses brazing logam Cu (tembaga dengan bahan tambah Ag (silver. Analisis hasil brazing dilakukan melalui analisis struktur mikro (metalografi untuk melihat kualitas tampak dari hasil brazing, serta analisis kekerasan mikro dan analisis parameter fisik standar terhadap hasil proses brazing. Penelitian ini telah menghasilkan perangkat alat pemurnian biogas yang dapat memurnikan biogas menjadi metana mendekati 100% dan sistem pengemasan (storage system  biogas bertekanan hingga 2 bar. Dari hasil analisis struktur mikro dan uji kekerasan mikro diketahui bahwa hasil proses brazing dengan biogas menghasilkan kualitas yang sama dengan hasil proses brazing dengan gas acetylene sehingga disimpulkan bahwa biogas dapat menjadi bahan bakar alternatif untuk proses brazing, khususnya untuk logam Cu dengan bahan tambah Ag.  Kata kunci : Biogas, Pressureized Storage, Brazing

  1. Hubungan Persepsi Siswa tentang Proses Peminatan dengan Aspirasi Karir Siswa

    Directory of Open Access Journals (Sweden)

    Ria Febriani

    2015-11-01

    Full Text Available Penelitian ini bertujuan untuk mendeskripsikan persepsi siswa tentang proses peminatan, mendeskripsikan aspirasi karir siswa, dan menguji  hubungan persepsi siswa tentang proses peminatan dengan aspirasi karir siswa. Penelitian ini berbentuk deskriptif  korelasional dengan sampel 85 orang siswa. Penelitian ini menggunakan instrumen persepsi siswa tentang proses peminatan dan instrumen aspirasi karir siswa yang dikembangkan oleh Afriyadi Sofyan (2013. Dari hasil penelitian diketahui sebagian besar persepsi siswa tentang proses peminatan berada pada kategori cukup baik, namun memiliki kecenderungan baik, sebagian besar aspirasi karir siswa berada pada kategori sedang, namun memiliki kecenderungan tinggi, serta terdapat hubungan yang signifikan antara persepsi siswa tentang proses peminatan dengan aspirasi karir siswa. Perlu upaya guru BK untuk lebih  meningkatkan pemberian layanan bimbingan dan konseling, agar pelaksanaan proses peminatan dapat berjalan dengan baik sehingga dapat meningkatkan persepsi siswa tentang proses peminatan dan dapat meningkatkan aspirasi karir siswa.

  2. ANALISIS PENGENDALIAN MUTU PROSES MACHINING ALLOY WHEEL MENGGUNAKAN METODE SIX SIGMA

    Directory of Open Access Journals (Sweden)

    Ong Andre Wahyu Rijanto

    2014-12-01

    Full Text Available PT. Meshindo Alloy Wheel adalah perusahaan yang bergerak di bidang manufaktur alloy wheel atau dikenal dengan sebutan velg racing untuk didistribusikan ke industri mobil atau dikenal sebagai OEM (Original Equipment Manufacturer baik untuk industri otomotif di Indonesia maupun di Jepang. Mutu merupakan syarat penting dalam sukses bisnis. Kehandalan kinerja proses dan keakuratan pencapaian persyaratan mutu harus dapat dipenuhi. Proses dikatakan capable jika dapat memenuhi spesifikasi pelanggan, variasi yang terjadi pada proses relatif kecil, dan defect atau DPMO yang terjadi kecil. Artikel ini menganalisis pengendalian mutu proses pembuatan valve hole location pada alloy wheel type MS 511 YA. Pengendalian variasi proses produksi dan pengukuran dengan menggunakan metode six sigma DMAIC (Define Measure Analysis Improve Control untuk dapat mencapai target penurunan cacat sampai mencapai 3,4 DPMO (defect per million opportunities, Cp 1,54 dan Cpk 1,54. Setelah proses six sigma selesai, diharapkan implementasi six sigma dapat memberikan saran-saran perbaikan pada proses-proses yang lain.

  3. ANALISIS PENGENDALIAN MUTU PROSES MACHINING ALLOY WHEEL MENGGUNAKAN METODE SIX SIGMA

    Directory of Open Access Journals (Sweden)

    Ong Andre Wahyu Rijanto

    2014-12-01

    Full Text Available PT. Meshindo Alloy Wheel adalah perusahaan yang bergerak di bidang manufaktur alloy wheel atau dikenal dengan sebutan velg racing untuk didistribusikan ke industri mobil atau dikenal sebagai OEM (Original Equipment Manufacturer baik untuk industri otomotif di Indonesia maupun di Jepang. Mutu merupakan syarat penting dalam sukses bisnis. Kehandalan kinerja proses dan keakuratan pencapaian persyaratan mutu harus dapat dipenuhi. Proses dikatakan capable jika dapat memenuhi spesifikasi pelanggan, variasi yang terjadi pada proses relatif kecil, dan defect atau DPMO yang terjadi kecil.  Artikel ini menganalisis pengendalian mutu proses pembuatan valve hole location pada alloy wheel type MS 511 YA. Pengendalian variasi proses produksi dan pengukuran dengan menggunakan metode six sigma DMAIC (Define Measure Analysis Improve Control untuk dapat mencapai target penurunan cacat sampai mencapai 3,4 DPMO (defect per million opportunities, Cp 1,54 dan Cpk 1,54. Setelah proses six sigma selesai, diharapkan implementasi six sigma dapat memberikan saran-saran perbaikan pada proses-proses yang lain.

  4. PROSES BERKARYA GRUP MUSIK DISTORSI AKUSTIK

    Directory of Open Access Journals (Sweden)

    Achmad Fauzie Tolah

    2014-08-01

    Full Text Available Penelitian ini bertujuan memberikan gambaran proses berkarya grup musik distorsi akustik, meliputi empat tahapan proses kreativitas. Penelitian dilakukan dengan metode penelitian analisis kualitatif dengan lokasi penelitian di Kota Semarang, adapun wujud dan sumber data terdiri dari sumber dan wujud data tertulis maupun tidak tertulis. Instrumen dan teknik pengambilan data mengunakan observasi, wawancara dan studi dokumentasi. Teknik keabsahan data menggunakan teknik triangulasi data. Sedangkan teknik analisis dan pengolahan data pengumpulan, reduksi, klarifikasi dan verifikasi data. Ciri khas karya dari distorsi akustik adalah musik bergenre shoegaze yang mampu diterima semua komunitas musik indie. Selain itu karya lagu dari proses kreativitas berkarya distorsi akustik mampu relevan terhadap pendidikan seni. Proses berkarya dari grup musik distorsi akustik telah melewati empat tahapan proses kreativitas, yaitu tahap preparasi, inkubasi, iluminasi dan verifikasi. Karya yang dihasilkan setelah melewati empat tahapan proses kreativitas hasilnya dapat dikatakan sebagai sebuah produk kreatif.This study aims to provide an overview work process distortion acoustic music group, includes four stages of the process of creativity. The study was conducted by the research method of qualitative analysis to study the location in the city, while the form and source of data consists of the data source and form of written or unwritten. Instruments and data capture techniques using observation, interview and documentation. Data validation techniques using data triangulation technique. While technical analysis and processing of data collection, reduction, clarification and verification of data. The distinctive feature of the work is the acoustic distortion shoegaze genre of music that is able to welcome all the indie music community. In addition, the work songs from the acoustic distortion capable of creativity at work relevant to art education. Working process of

  5. Language, Metaphor, and Creativity in Discursive Prose.

    Science.gov (United States)

    Ross, William T.

    1978-01-01

    Traces the denigration of discursive prose back through the "New Criticism" to Romanticism and Samuel Taylor Coleridge, who saw poetry as special and separate from other rhetoric. Notes that discursive prose can be just as creative and interesting as poetry. Urges composition teachers to shift their point of view accordingly. (RL)

  6. Penambangan Proses Yang Mendukung Penilaian Perangkat Lunak Dengan Cobit4.1

    OpenAIRE

    Setiawan, Nanang Yudi; Sarwosri, Sarwosri

    2013-01-01

    Ide dasar di Balik software process improvement - SPI menjadi alasan bahwa proses perangkat lunak berkualitas baik merupakan prasyarat bagi produk perangkat lunak berkualitas baik. Oleh karenanya, proses dalam perangkat lunak perlu untuk terus dinilai dan ditingkatkan. COBIT merupakan salah satu kerangka SPI yang dapat menjadi acuan ketercapaian kualitas perangkat lunak. Untuk mendukung penilaian proses, penelitian ini mengusulkan penerapan teknik penambangan proses (process mining) dalam pen...

  7. ANALISIS KEAMANAN DATA PADA BLOCK CIPHER ALGORITMA KRIPTOGRAFI RSA

    Directory of Open Access Journals (Sweden)

    Fadhillah Azmi

    2017-01-01

    Full Text Available Komunikasi adalah proses dasar dari pertukaran informasi. Efektifitas komunikasikomputer secara umum adalah melalui internet atau beberapa saluran komunikasi lainnya.Tujuan utama tulisan ini adalah berdasarkan pada analisis hasil yang diberikan Weinermengatakan bahwa jika private key d digunakan dalam algoritma kriptografi RSA kurang darin292, maka sistem tersebut kurang aman. Di sini penulis menganalisa pada hasil yang diberikanoleh Weiner dan mencoba untuk meningkatkan range dari private key d sampai n0.5. Karena nadalah perkalian p dan q, yang mana bilangan relative prima. Sehingga mempengaruhi kinerjaenkripsi algoritma yang lebih aman.

  8. Optimasi Proses Produksi Etanol dari Molases Menggunakan Teknik Fermentasi- Ekstraktif

    Directory of Open Access Journals (Sweden)

    Firda Atikah Rosyadi

    2014-09-01

    Full Text Available Penelitian ini bertujuan untuk meningkatkan yield dan produktivitas etanol menggunakan fermentasi kontinyu pada packed bed bioreaktor dan proses fermentasi yang diintegrasikan proses ekstraksi dengan recycle dari rafinat yang dikembalikan pada fermentor serta mengetahui jenis pelarut yang terbaik untuk proses fermentasi ekstraktif ditinjau dari sifat inhibisi serta melakukan optimasi dengan mengembangkan model matematis dari proses fermentasi-ekstraktif menggunakan MATLAB 7.0 dengan metode Golden Section serta membandingkan hasilnya antara eksperimen dan pemodelannya. Pada proses ini digunakan molases sebagai bahan baku dan n-amyl alcohol, 1-octanol dan 1-dodecanol sebagai solvent pada proses ekstraksi. Konsentrasi awal molases adalah 161,14 g/L (17%. Variabel recycle ratio yang digunakan sebesar 40%, 50%, 60% dan 70% terhadap feed. Pelarut yang digunakan ada tiga macam berdasarkan jumlah atom C-nya yaitu n-amyl alcohol (C-5, 1-octanol (C-8, dan 1-dodecanol(C-12. Konsentrasi gula reduksi sisa dianalisa dengan metode DNS (Dinitrosalisilic acid, sedangkan kadar etanol dianalisa dengan metode Gas Cromatography (CG. Fermentasi-ekstraktif dilakukan secara eksperimen dan pemodelan dengan metode Golden Section. Yield optimum untuk pelarut n-amyl alcohol adalah sebesar 10,0049%. Pada recycle ratio 0.4 . Nilai yield optimum yang didapatkan untuk pelarut 1-octanol dan 1-dodecanol adalah saat tidak ada recycle sebesar 9,9949% dan 9,992%. Berdasarkan hasil tersebut maka diketahui bahwa n-amyl-alkohol merupakan pelarut terbaik yang digunakan pada proses fermentasi ekstraktif.

  9. PENYUSUNAN ULANG AREA KERJA PRODUKSI MESIN THRESSER UNTUK PERCEPATAN PROSES

    Directory of Open Access Journals (Sweden)

    Noviyarsi Noviyarsi

    2014-02-01

    Full Text Available Permasalahan yang umum dihadapi oleh industri kecil menengah adalah kemampuan untuk menghasilkan produk dengan kualitas baik dengan harga yang bersaing di pasaran. Hal ini dikarenakan proses produksi yang belum terstandarisasi dan area kerja yang tidak tertata sehingga berdampak pada banyaknya pemborosan pada area kerja. Tujuan penelitian ini adalah menyusun ulang area kerja mesin thresser untuk percepatan proses. Metode yang digunakan dalam penelitian ini adalah lean six sigma dan 5S. Penggunaan kedua metode ini akan dapat meminimasi aktivitas, material, komponen dan spare part yang berada pada area produksi sehingga waktu proses menjadi lebih cepat, area kerja dimanfaatkan dengan optimal dan lingkungan kerja menjadi lebih rapi dan teratur. Hasil analisis dengan lean six sigma memperlihatkan bahwa efisiensi siklus proses 0.84%, dengan peningkatan kecepatan proses 7.9%. Hasil analisis terhadap area kerja terdapat 5 area kerja yang memerlukan perbaikan susunan area yaitu area storage, mesin potong plat, mesin potong besi, mesin rolling dan mesin compressor.

  10. Perancangan dan Proses Pembuatan Inner Door Panel Mobil Pick Up Multiguna

    Directory of Open Access Journals (Sweden)

    Bambang Prayogi

    2014-09-01

    Full Text Available Sejak tahun 2012 Jurusan Teknik Mesin bekerja sama dengan PT. INKA mengembangkan mobil murah multigna. Mobil pick up tersebut diberi nama GEA. Pengembangan dilakukan pada body, chasis dan engine. Sebagai bagian dari body, pintu mobil juga akan dikembangkan. Pada tahun 2013, penelitian terhadap posisi handle pengatur kaca jendela atau window regulator mobil pick up GEA telah dilakukan. Evaluasi tersebut mengharuskan adanya perubahan desain dari inner door panel. Suatu rancangan pengembangan desain inner door panel perlu dilakukan agar inner door panel dapat diproduksi secara massal. Langkah-langkah penelitian yang dilakukan meliputi penyusunan list of requirement untuk pengembangan konsep, analisa getaran dan tegangan yang terjadi pada panel dengan bantuan software CATIA. Selanjutnya perancangan proses pembuatan dan perancangan punch and dies-nya dilakukan. Dari analisa getaran yang dilakukan, dapat diketahui inner door panel memiliki frekuensi natural sebesar 166,94 Hz (10.016,4 rpm artinya panel aman dan tidak terpengaruh oleh getaran dari mesin mobil. Tegangan yang terjadi pada inner door panel akibat gaya pembebanan pada handle pintu bagian dalam adalah 2,9159 x 107 Pa (2,97 Kg/mm2 sehingga lebih kecil dari tegangan ijin materialnya 13,94 Kg/mm2 dan rancangan masih berada dalam kategori aman. Untuk membuat inner door panel dilakukan 3 macam proses pembentukan yaitu trimming, embossing dan piercing. Total gaya pembentukan masing-masing proses sebagai berikut: Gaya pembentukan proses trimming = 48.96 ton, proses embossing = 26.89 ton dan proses piercing = 41.66 ton. Window regulator yang disarankan untuk digunakan pada mobil pick up multiguna ini adalah scissor type window regulator dengan tenaga penggerak manual. Pada perancangan punch and dies, tegangan kompresi masing-masing proses dihitung dan hasilnya adalah sebagai berikut: Tegangan kompresi proses trimming 0.11 Kg/mm2, tegangan kompresi proses embossing 0.28 Kg/mm2, tegangan kompresi

  11. WHEN PROSE DANCES AND DANCE WALKS

    Directory of Open Access Journals (Sweden)

    Ana Marques Gastão

    2011-04-01

    Full Text Available To Paul Valéry, prose follows the less action path, as in marching in a straight line, and poetry, as in dancing – in as much as it is a «system of acts» – it not only intends to go nowhere but it remains in its own realisation, creating its own purpose. Why then does his prose contain this commanded impulse, led by desire, and his poetry does not, since they are so often one and the same? In this essay, looking at works by Rainer Marie Rilke, Fernando Pessoa, António Vieira and Yvette K. Centeno, I develop the idea that, very often, to establish a distinction between genres can be impractical and useless, if one considers concepts such as march/walk and dance from a choreographic perspective. Even if it be a possible question and since it has nevertheless been the object of study by scholars of all times, why is it undertaken? Why can’t prose be danced to, and poetry marched to? Can the walking essence unconsciously dance?

  12. REENGINEERING PROSES BISNIS : TINJAUAN KONSEPTUAL DAN METODOLOGI

    Directory of Open Access Journals (Sweden)

    Lena Ellitan

    1999-01-01

    Full Text Available Business process reengineering is fundamental rethinking and radical redesign of an organization's business processes that leads the organization to achieve dramatic improvement in business performance. Many firms have successfully embraced this new innovation paradigm to achieve orders of magnitude improvements in cost, eficiency, quality and value. Even more firms are seeking opportunities to apply reengineering and methodologies to assist them in doing so. The recognition of reengineering as a new management paradigm emerged in the 1990's, though it may be argued that the principle of reengineering has been applied well before then. The early 1990's saw world wide interest in reengineering. Consequently, many organizations have reported their first-cycle experiences in reengineering. Reengineering practices in the period of the 1990's was largerly characterized by application to operational processes and emphasis on operational measure of time, cost, and quality. Quite recently, a more strategic flavor of reengineering has been advocated. One of the hopes of new thinking is that by trancending microscopic concern of operational strategy, it would help the organization derive significantly greater value out of the reengineering effort. This paper presents: 1. The concept of reengineering 2. Various problems in business process reengineering. 3. The rigorous methodology for organizing reengineering activities. Abstract in Bahasa Indonesia : Reengineering proses bisnis adalah pemikiran ulang fundamental dan disain ulang radikal suatu proses bisnis organisasi yang akan mengarahkan organisasi untuk mencapai peningkatan kinerja bisnis secara dramatis. Beberapa perusahaan telah menerapkan paradigma inovasi baru ini untuk mencapai berbagai perbaikan dalam biaya, kualitas, dan efisiensi. Bahkan makin banyak perusahaan yang mencari peluang untuk menerapkan proyek reengineering dan metodologi-metodologi yang membantu mereka dalam mencapai usaha

  13. Penerapan Supervisi Klinis untuk Meningkatkan Kinerja Guru dalam Proses Belajar Mengajar Gugus IV Sanankulon

    Directory of Open Access Journals (Sweden)

    Sri Utami

    2017-08-01

    Full Text Available Tujuan penelitian untuk mengetahui dampak supervise klinis terhadap kinerja guru dalam proses belajar mengajar.Tindakan melalui supervise klinis.Hasil penelitian menunjukkan adanya peningkatan kinerja guru dalam melaksanakan proses belajar mengajar, siklus I mencapai 72% atau ada13 guru dari 18 guru sudah berhasil dalam melaksanakan proses belajar mengajar, siklus II keberhasilan guru dalam melaksanakan proses belajar mengajar mencapai 89%atau ada 16 guru dari 18 guru sudah berhasil dalam melaksanakan proses belajar mengajar.

  14. PENAMBANGAN PROSES YANG MENDUKUNG PENILAIAN PERANGKAT LUNAK DENGAN COBIT4.1

    Directory of Open Access Journals (Sweden)

    Nanang Yudi Setiawan

    2013-01-01

    Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Ide dasar di balik software process improvement - SPI menjadi alasan bahwa proses perangkat lunak berkualitas baik merupakan prasyarat bagi produk perangkat lunak berkualitas baik. Oleh karenanya, proses dalam perangkat lunak perlu untuk terus dinilai dan ditingkatkan. COBIT merupakan salah satu kerangka SPI yang dapat menjadi acuan ketercapaian kualitas perangkat lunak. Untuk mendukung penilaian proses, penelitian ini mengusulkan penerapan teknik penambangan proses (process mining dalam penilaian perangka t lunak untuk menilai ketercapaian indikator kematangan proses sesuai panduan COBIT -PAM (COBIT Process Assessment Model. Hasil evaluasi dengan validitas dan reliabilitas menunjukkan bahwa teknik penambangan proses dapat diterapkan dengan menyesuaikan tujuan dan produk kerja dari setiap atribut penilaian proses dalam COBIT.

  15. KINETIKA REAKSI PADA PROSES PRODUKSI DIETIL ETER DARI ETANOL DENGAN KATALIS H-ZEOLIT

    Directory of Open Access Journals (Sweden)

    Widayat Widayat

    2012-11-01

    Full Text Available DiEtil Eter diproduksi dari etanol dengan proses dehidrasi. Penelitian ini bertujuan untukmempelajari kinetika reaksi proses dehidrasi etanol dengan katalis H-zeolit. Katalis H-zeolitdisintesis dengan proses dealuminasi dan kalsinasi dan impregnasi dengan logam Al dan prosesreduksi dan kalsinasi. Proses produksi DiEtil Eter dilaksanakan dengan proses adsorpsi dan reaksikatalitik sedangkan proses studi kinetika reaksi menggunakan pendekatan Langmuir-Hinshelwood.Proses analisis kinetika reaksi menggunakan perangkat lunak MATLAB. Model kinetika reaksi prosesdehidrasi etanol menjadi DiEtil Eter dan etilen dengan katalis H-zeolit pada konsentrasi umpanetanol 85-95% dan rentang temperatur 140-240oC, dimana reaksi permukaan yang mengontrol reaksiglobal adalahDiEthyl Ether is produced by using ethanol dehydrationprocess. The objective of this research was to study the reaction kinetic of ethanol dehydrationprocess by H-zeolite catalyst from natural zeolite. The H-zeolite catalyst was prepared bydealumination, calcination, impregnation with Al and reduction processes. DiEthyl Ether productionwas produced by using adsorption-catalytic reaction. The kinetic study was did with MATLABsoftware. Kinetic model of ethanol dehydration processes into DiEthyl Ether and ethylene with Hzeolitecatalyst and ethanol feed concentration among 85-95% and temperature between 140-240oCunder surface reaction is shown by

  16. TRANSLATING SERVICE TECHNICAL PROSE

    African Journals Online (AJOL)

    language. The Application of Technical Service. Prose. To form a good idea of the appl ication .... cost lives. In this particular domain, translators must have a sound technical ... These semantic ... another language and often, in doing so, changing its meaning. The words ..... He will hand out tasks to each translator and after.

  17. HUBUNGAN PENDAMPINGAN KELUARGA DENGAN LAMA PROSES PERSALINAN KALA I DI PUSKESMAS KARANGDORO KOTA SEMARANG

    Directory of Open Access Journals (Sweden)

    Widyah Setyowati

    2017-09-01

    Full Text Available Latar Belakang : Support system yang diberikan kepada ibu menjelang persalinan sangat mendukung dalam menurunkan tingkat kecemasan pada ibu pada saat persalinan. Keuntungan pendamping persalinan oleh keluarga dapat mengurangi rasa cemas, mempercepat  proses persalinan, menghindari komplikasi-komplikasi pada persalinan, mengurangi nilai score APGAR < 7 pada bayi baru lahir sehingga menghindari bayi asfeksia, waktu yang di butuhkan dalam proses persalinan semakin pendek, kepuasan ibu semakin meningkat dalam pengalaman melahirkan, persalinan yang diakhiri dengan vacuum ekstraksi, fosceps, dan secsio cesaria semakin menurun. Tujuan : Mengetahui hubungan pendampingan keluarga dengan lama proses persalinan kala I di Puskesmas Karangdoro Kota Semarang. Metode : Penelitian ini menggunakan rancangan cross sectional dan jenis penelitian deskriptif analitik. Populasi dalam penelitian ini sebanyak 39 responden, menggunakan teknik sampel Total populasi yaitu semua ibu Primipara yang bersalin di puskesmas Karangdoro Semarang sebanyak 39 responden. Analisa yang digunakan univariat dan bivariat menggunakan uji chi-square. Hasil : Sebagian besar ibu dalam proses persalinan kala I mendapatkan pendampingan keluarga yang baik selama proses persalinan kala 1 sebanyak 24 (72,7% responden; Sebagian besar ibu mengalami proses persalinan kala 1 cepat sebanyak 21 (63, 6% responden; Ada hubungan yang bermakna antara pendampingan keluarga dengan lama proses persalinan di Puskesmas Karangdoro Semarang dengan  nilai continuity correction sebesar 3,275 dengan p value fisher exact sebesar 0,044 < 0,05. Simpulan : Ada hubungan yang bermakna antara pendampingan keluarga dengan lama proses persalinan di Puskesmas Karangdoro Semarang. Masyarakat diharapkan menambah wawasan tentang pendampingan keluarga pada proses persalinan kala I, sehingga masyarakat tidak merasa tabu dan takut dalam mendampingi persalinan kala I pada ibu bersalin.Latar Belakang : Support system yang diberikan

  18. KETERAMPILAN PROSES SAINS SISWA KELAS VII DENGAN PEMBELAJARAN MODEL LEVELS OF INQUIRY

    Directory of Open Access Journals (Sweden)

    Fitri Fatimah

    2016-09-01

    Banyak penelitian yang mengkaji tentang keterampilan proses sains namun masih diteliti secara terpisah antara keterampilan proses dasar dan keterampilan terintegrasi. Oleh karena itu, perlu dilakukan penelitian tentang keterampilan proses sains yang menggabungkan keterampilan dasar dan terintegrasi dengan menggunakan Levels of Inquiry pada materi ciri-ciri dan klasifikasi makhluk hidup. Penelitian ini menggunakan mixed methods desain embedded terhadap siswa kelas VII SMPN 9 Pontianak. Data dianalisis secara kuantitatif dan kualitatif. Hasil analisis data menunjukkan pembelajaran model Levels of Inquiry dapat melatih dan mengembangkan keterampilan proses sains siswa mulai dari kurang terampil sampai menjadi sangat terampil. Hasil pretes dan postes memperlihatkan peningkatan hasil dengan N-gain sebesar 0.67 berada pada kriteria sedang.

  19. Praktik Trademark Squatting dalam Proses Pendaftaran Merek di Indonesia

    OpenAIRE

    Widya Justitia

    2016-01-01

    Penelitian ini bertujuan untuk mengetahui dan menganalisis mengapa praktik trademark squatting dapat terjadi dalam proses pendaftaran merek beserta cara mengatasinya. Selanjutnya, penelitian ini juga membahas mengenai konsepsi ideal terkait proses pendaftaran merek di Indonesia guna menghindari dan meminimalisasi praktik trademark squatting. Penelitian ini merupakan penelitian kualitatif yang bersifat yuridis empiris dan data yang terkumpul dianalisa dengan metode deskriptif kualitatif. Hasil...

  20. The neuroaesthetics of prose fiction: pitfalls, parameters and prospects.

    Science.gov (United States)

    Burke, Michael

    2015-01-01

    There is a paucity of neuroaesthetic studies on prose fiction. This is in contrast to the very many impressive studies that have been conducted in recent times on the neuroaesthetics of sister arts such as painting, music and dance. Why might this be the case, what are its causes and, of greatest importance, how can it best be resolved? In this article, the pitfalls, parameters and prospects of a neuroaesthetics of prose fiction will be explored. The article itself is part critical review, part methodological proposal and part opinion paper. Its aim is simple: to stimulate, excite and energize thinking in the discipline as to how prose fiction might be fully integrated in the canon of neuroaesthetics and to point to opportunities where neuroimaging studies on literary discourse processing might be conducted in collaborative work bringing humanists and scientists together.

  1. Improving Children's Prose Comprehension: Selected Strategies That Seem to Succeed. Theoretical Paper No. 72.

    Science.gov (United States)

    Levin, Joel R.; Pressley, Michael

    Prose-learning strategies are classified in this paper as prose-dependent (those that authors can use to optimize communication) or processor-dependent (those that learners can use to optimize reception) and are cross-classified as stage-setting (those that prepare the learner for upcoming prose information) or storage-retrieval oriented (those…

  2. PENGARUH PROJECT BASED LEARNING TERHADAP KETERAMPILAN PROSES SAINS SISWA KELAS X SMA NEGERI SIDOARJO

    Directory of Open Access Journals (Sweden)

    Nuril Maghfiroh

    2016-08-01

    Tujuan penelitian ini adalah untuk mengetahui pengaruh pembelajaran Project Based Learning terhadap keterampilan proses sains siswa kelas X SMA Negeri 4 Sidoarjo. Penelitian ini menggunakan metode Quasi Eksperimen dengan rancangan pretest postest non-equivalent control group design. Penentuan sampel mempertimbangkan kemampuan kognitif yang setara antara dua kelas yang menjadi kelompok kontrol dan kelompok eksperimen. Keterampilan proses sains diukur melalui tes tulis yang kemudian dianalisis dengan rubrik penilaian yang sudah disesuaikan untuk setiap aspek keterampilan proses sains. Hasil penelitian menunjukkan bahwa ada pengaruh pembelajaran Project Based Learning terhadap keterampilan proses sains siswa.

  3. PEMODELAN MATEMATIKA PROSES PRODUKSI POLYHYDROXYBUTYRATE (PHB DARI TAPIOKA

    Directory of Open Access Journals (Sweden)

    Margono Margono

    2012-05-01

    Full Text Available MATHEMATICS MODELLING OF POLYHYDROXYBUTYRATE (PHB PRODUCTION FROM TAPIOCA. One of the technical approaches to get improvement of PHB productivity was a process simulation by using mathematical modeling. The objective of this research was to develop mathematical model which could be used to simulate fermentation of polyhydroxybutyrate production by Bacillus cereus IFO 13690 using tapioca substrates. Three different experiments with initial ammonium of 0.286, 0.566, and 1.203 g/L were carried out in 5 L fermentor and 500 rpm of agitation speed. The pH medium was controlled at 5.6 after it came down from the initial pH of 6.8. Meanwhile, the initial doT was 70% air saturation and also came down to and maintained at doT of 5% air saturation. PHB accumulation was growth associated product. Model of bacteria mechanism on utilizing tapioca and the mathematical model were proposed. The proposed model was suitable with the experimental phenomena. However, the rate of fermentation process was the controlling rate for overall PHB synthesis.   Abstrak   Salah satu pendekatan teknis untuk melakukan optimasi proses fermentasi adalah melakukan simulasi menggunakan model matematika.  Tujuan penelitian ini adalah mengembangkan model matematika yang dapat digunakan untuk melakukan simulasi proses pada fermentasi produksi polyhydroxybutyrate (PHB dari tapioka oleh Bacillus cereus IFO 13690. Tiga buah percobaan dengan konsentrasi amonium awal 0,286, 0,566, dan 1,203 g/L dilakukan pada fermentor dengan volume 5 L dan kecepatan pengadukan 500 rpm. Percobaan dilakukan dengan kondisi awal  pH 6,8 dan konsentrasi oksigen terlarut (doT 70% udara jenuh. Kondisi awal tidak dikontrol sehingga pH medium turun dan dijaga pada 5,6 menggunakan pengontrol pH. Sedangkan doT turun dan dikontrol pada 5% udara jenuh. Data percobaan dan model matematika menunjukkan bahwa produksi PHB mengikuti pola pertumbuhan berasosiasi dengan produk (growth associated product. Model mekanisme

  4. Pictures as Prose-Learning Devices.

    Science.gov (United States)

    Levin, Joel R.

    Most popular strategies, including illustrations, for improving prose processing consist of procedures that force attention either to the text's macrostructure or to the organization and interconnections of its propositions. These strategies are assumed to enhance students' comprehension of the text as encoded, as well as to afford students an…

  5. Memory decreases for prose, but not for poetry.

    Science.gov (United States)

    Tillmann, Barbara; Dowling, W Jay

    2007-06-01

    Memory for details of text generally declines relatively rapidly, whereas memory for propositional and context-based meanings is generally more resilient over time. In the present study, we investigated short-term memory for two kinds of verbal material: prose and poetry. Participants heard or read prose stories or poems in which aphrase near the start of the passage served as a target. The text continued, and after various delays, memory was tested with a repetition of the target (old verbatim; O), a paraphrased lure (P), or a lure in which the meaning was changed. For prose, memory for surface details (as measured by O/P discrimination) declined over time (Experiments 2-4), as was expected. For poetry, memory for surface details (O/P discrimination) did not decline with increasing delay (Experiments 1, 3, and 4). This lack of decline in memory for the surface details of poetry is discussed in relation to similar results previously observed for musical excerpts (Dowling, Tillmann, & Ayers, 2001), suggesting that a particular role is played by the temporal organization and rhythmic structure of poetry andmusic.

  6. PERANCANGAN SISTEM INFORMASI ADMINISTRASI KARYAWAN RADIO

    Directory of Open Access Journals (Sweden)

    Adi Wahyu Pribadi

    2017-05-01

    Full Text Available Bidang usaha yang bergerak dibidang Stasiun Radio yang  berguna sebagai penyedia jasa berita dan hiburan. kesulitan dalam proses pencarian dan mengelola data karyawan,  absensi karyawan, waktu hadir karyawan ataupun pertukaran shift para penyiar yang terkadang lupa atau tidak tercatat karena hilangnya dokumen atau lain sebagainya, adanya kesulitan pada waktu tertentu dalam mengatur atau menghandle perubahan gaji yang tidak menentu, data cuti dan perhitungan cuti karyawan yang tidak tercatat sehingga hak cuti karyawan tidak terhitung dengan baik, tidak tercatatnya data karyawan yang telah resign atau telah mengundurkan diri, pengelolaan data PHK (Pemutusan Hubungan Kerja karyawan sehingga perhitungan pesangon yang terkadang sering terjadi kesalahan. Dalam penelitian ini penulis menggunakan metode waterfall, observasi dan wawancara. Pada implementasi ditampilkan proses login, penginputan : data karyawan, absensi, pengajuan cuti, pengunduran diri, klarifikasi surat peringatan dan PHK, perubahan gaji, pengembangan skill, penilaian kinerja. Dapat disimpulkan bahwa sistem ini menangani semua pencatatan master karyawan, perubahan gaji berdasarkan penilaian kinerja karyawan dan UMR, pengunduran diri karyawan dan pencatatan dan pengklasifikasian SP dan PHK yang akan diberikan kepada karyawan, sehingga  HRD, R&D, Finance & Administration dan Manager Perusahaan dapat mendapatkan informasi dan laporan dengan mudah. Sistem ini juga memudahkan karyawan dalam melakukan proses absensi, cuti, pengembangan skill. Pengontrolan dalam pencatatan dan keamanan data dapat ditangani dengan baik karena setiap user mempunyai password masing-masing dan diberikan menu yang sesuai dengan proses yang akan dijalankan

  7. PROSES REPRESENTASI SIMBOL MATEMATIKA PADA PROSES BERMAIN ANAK TK

    Directory of Open Access Journals (Sweden)

    Ari Kusuma Sulyandari

    2017-01-01

    Full Text Available This study aims to determine the representation of children in kindergartens of the objects and symbols of numbers 1 to 10 when playing activities. So the mathematical activity in appropriate with the child's development. This study uses qualitative descriptive by Moleong. The collection of data through observation, interviews, photo and recording. To check the validity of researchers used data triangulation of data sources, theory and methodology. Results of the study is that children need visual in process representation. They need to understand the concept of visualization when many objects, counting objects, understand the numbers 1 to 10. Children are not able to think abstractly. Representation of children has not been perfect. Method of learning in kindergarten helps learning to count and recognize numbers. Especially if done with playing. Tujuan penelitian ini untuk mengetahui proses representasi anak TK pada simbol matematika bilangan asli 1 sampai 10 pada proses bermain sehingga pembelajaran matematika sesuai dengan perkembangan anak. Metode penelitian yang digunakan adalah deskriptif kualitatif. Teknik pengumpulan data menggunakan teknik observasi, wawancara, dan dokumentasi berupa foto serta perekaman. Teknik analisis data yang digunakan pada saat penelitian adalah analisis deskriptif untuk mengecek keabsahan peneliti menggunakan data triangulasi sumber data, teori, dan metodologi. Hasil penelitian menunjukkan bahwa anak usia TK membutuhkan visual dalam aktivitas representasi. Anak-anak membutuhkan bantuan visual saat memahami konsep banyak benda, menghitung benda, memahami bilangan 1 sampai 10. Hal ini dikarenakan anak usia TK masih belum dapat berpikir secara abstrak sehingga representasi anak usia TK masih belum sempurna. Penggunaan metode pembelajaran tematik terpadu di TK mempermudah pembelajaran berhitung dan mengenal angka terlebih jika dilakukan dengan bermain.

  8. KARAKTERISTIK BATUBARA DAN PENGARUHNYA TERHADAP PROSES PENCAIRAN

    Directory of Open Access Journals (Sweden)

    Harli Talla

    2014-12-01

    Full Text Available Tujuan penelitian ini adalah mempelajari pengaruh karakteristik batubara terhadap proses pencairan dengan menggunakan metoda hidrogenasi katalitik. Sampel batubara yang digunakan adalah batubara Sorong dengan peringkat lignit dan batubara Mulia dengan peringkat sub bituminus. Proses pencairan dilakukan dalam sebuah otoklaf yang berkapasitas 5 liter dengan menggunakan pelarut antrasen dan katalis bijih besi. Kisaran suhu pencairan adalah 375ºC, 400ºC, 425ºC, dan 450ºC, sementara tekanan awal hidrogen ditetapkan 100 bar. Hasil yang diperoleh menunjukan bahwa karakteristik batubara memiliki pengaruh yang signifikan terhadap pencairan. Konversi tertinggi batubara Sorong adalah 89,94% pada suhu 400ºC, sementara untuk batubara Mulia sebesar 87,28% pada suhu 450ºC

  9. PENGEMBANGAN MODEL PEMBELAJARAN KIMIA UNTUK MENINGKATKAN KETERAMPILAN PROSES DAN KETERAMPILAN BERPIKIR SISWA SMA

    Directory of Open Access Journals (Sweden)

    Siti Darsati

    2015-01-01

    Full Text Available Tujuan penyusunan model pembelajaran kimia ini untuk meningkatkan keterampilan proses dan keterampilan berpikir siswa SMA. Model Pembelajaran Laju Reaksi untuk SMA mengandung 17 konsep, meliputi konsep abstrak, konsep yang berdasarkan prinsip dan konsep yang menyatakan simbol. Keterampilan Berpikir Kritis dan Keterampilan Proses Sains yang dikembangkan lebih banyak pada keterampilan menyimpulkan. Model ini telah di implementasikan pada 2 SMA di Kodya/Kabupaten Bandung. Kata kunci: Model pembelajaran, keterampilan proses, keterampilan berpikir

  10. On the Alternative Use of Verse and Prose in Hamlet

    Institute of Scientific and Technical Information of China (English)

    李雷

    2008-01-01

    As a master in language,William Shakespeare is proficient in using verse and prose alternatively in his tragedies and comedies,which is regarded as the key to his success in literature by some critics.In this thesis,I would like to analyze the three criteria for the altemafion of verse and prose in Hamlet,in which a discussion of functions of the alternation will be included

  11. Optimasi Proses Spray Drying Pada Enkapsulasi Antosianin Ubi Ungu

    Directory of Open Access Journals (Sweden)

    Retno Yunilawati

    2018-04-01

    Full Text Available Teknologi proses spray drying banyak dilakukan pada enkapsulasi zat warna alam untuk aplikasi di industri. Pada penelitian ini dilakukan enkapsulasi antosianin ubi ungu dengan teknik spray drying. Tujuan dari penelitian ini adalah optimasi proses spray drying pada enkapsulasi antosianin ubi ungu. Optimasi proses dilakukan pada kondisi berbagai suhu inlet (150 °C sampai dengan 180 °C dan jumlah maltodekstrin sebagai carrier (5% sampai dengan 15%. Sebagai respon dilakukan pengukuran kadar air, absorbansi, dan kadar antosianin. Response Surface Methodology (RSM dengan metode Central Composite Design (CCD digunakan untuk analisis data optimasi. Hasil analisis menunjukkan bahwa suhu inlet dan persentase maltodekstrin berpengaruh secara signifikan terhadap kadar air, absorbansi, dan kadar antosianin total. Kondisi optimal didapatkan pada suhu inlet 166,96 °C dan maltodekstrin sebesar 5%. Pada kondisi ini dihasilkan serbuk antosianin ubi ungu dengan kadar air 4,79%; absorbansi 0,8827; dan kadar antosianin total 968,65 mg/kg.

  12. Differential Forgetting of Superordinate and Subordinate Information Acquired from Prose Material

    Science.gov (United States)

    Miller, Raymond B.; And Others

    1977-01-01

    The superior retention of superordinate ideas over time was replicated in this study which demonstrated the construct validity of a recognition test based upon the structure of a prose passage. A link was made between existing data on memory for prose and past theory: Ausubel's subsumption theory and Craik and Lockhart's levels-of-processing…

  13. Pengembangan Instrumen Penilaian Mapel Sains melalui Pendekatan Keterampilan Proses Sains SD/MI

    Directory of Open Access Journals (Sweden)

    Moh. Arif

    2016-06-01

    Full Text Available Penulisan artikel ini bertujuan untuk memberikan format pengembangan intrumen penilaian keterampilan proses sains SD yang masih menjadi problematika untuk menentukan pengembangan instrumen. Di samping itu, artikel ini ditulis untuk mengetahui karakteristik dan beberpa prosedur pelaksanaan penilaian proses sains SD dengan memberikan format pengembangan instrumen penialaian proses sains yang meliputi penyusunan rencana penelitian, penyusunan kisi-kisi, pembuatan soal sampai pada penganalisian butir soal. Konsep dasar penilaian yang perlu ditekankan adalah keefektivan instrumen penilaian, yang terdiri dari tiga unsur utama yakni valid (validity, reliabel (reliability, dan praktis (practicality. Berdasarkan tujuan dan perbedaan waktu pelaksanaanya, terdapat tiga jenis bentuk penilaian proses sains pada siswa Sekolah Dasar: Penilaian Diagnostik, Penilaian formatif dan Penilaian sumatif. Tes akan dianalisis secara kualitatif baik dari segi materi, konstruksi maupun bahasa. Analisis secara kuantitatif dengan pendekatan teori tes klasik yakni dengan Iteman dan analisis secara kuantitatif menggunakan pendekatan teori tes modern yakni program Bigstep.

  14. PROSES PENENTUAN HARGA JUAL PADA RUMAH MAKAN CITRA MINANG DI MAKASSAR

    OpenAIRE

    SULPA, NADYLAH

    2015-01-01

    2015 Proses Penentuan Harga Jual Pada Rumah Makan Citra Minang di Makassar The Process of Determining the Selling Price at Citra Minang Restaurant in Makassar Nadylah Sulpa Abdul Hamid Habbe Darmawati Penelitian ini bertujuan untuk mengetahui proses penentuan harga jual menurut Rumah Makan Citra Minang dan nilai harga jual produk bila dihitung menggunakan metode cost plus pricing. Data penelitian ini diperoleh dari data...

  15. Teori Implisit dalam Proses Belajar, Relasi antar Pribadi dan antar Kelompok

    Directory of Open Access Journals (Sweden)

    Aquilina Tanti Arini

    2014-06-01

    Full Text Available Artikel ini memaparkan tentang teori implisit yang perkembangannya dipelopori oleh Carol S. Dweck dan kolega-koleganya. Teori implisit merupakan teori orang awam yang terdiri atas teori entitas dan inkremental. Teori entitas adalah pandangan yang dimiliki orang awam bahwa sifat bersifat permanen, sedangkan teori inkremental adalah pandangan orang awam bahwa sifat bersifat dinamis dan dapat dikembangkan. Pemaparan teori implisit didasarkan pada hasil-hasil penelitian pada berbagai isu belajar dan relasi-relasi sosial, meliputi penelitian-penelitian tentang peran teori implisit pada performansi dan proses-proses belajar yang mendasarinya, pada relasi antar pribadi dan relasi antar kelompok. Selain itu juga dipaparkan hasil penelitian tentang intervensi untuk mengubah teori implisit yang mendukung perubahan diri dan sosial yang konstruktif. Paparan tentang teori implisit diharapkan memberikan pemahaman tentang peran perbedaan individu dalam proses interaksi sosial.

  16. Writing intelligible English prose for biomedical journals.

    Science.gov (United States)

    Ludbrook, John

    2007-01-01

    1. I present a combination of semi-objective and subjective evidence that the quality of English prose in biomedical scientific writing is deteriorating. 2. I consider seven possible strategies for reversing this apparent trend. These refer to a greater emphasis on good writing by students in schools and by university students, consulting books on science writing, one-on-one mentoring, using 'scientific' measures to reveal lexical poverty, making use of freelance science editors and encouraging the editors of biomedical journals to pay more attention to the problem. 3. I conclude that a fruitful, long-term, strategy would be to encourage more biomedical scientists to embark on a career in science editing. This strategy requires a complementary initiative on the part of biomedical research institutions and universities to employ qualified science editors. 4. An immediately realisable strategy is to encourage postgraduate students in the biomedical sciences to undertake the service courses provided by many universities on writing English prose in general and scientific prose in particular. This strategy would require that heads of departments and supervisors urge their postgraduate students to attend such courses. 5. Two major publishers of biomedical journals, Blackwell Publications and Elsevier Science, now provide lists of commercial editing services on their web sites. I strongly recommend that authors intending to submit manuscripts to their journals (including Blackwell's Clinical and Experimental Pharmacology and Physiology) make use of these services. This recommendation applies especially to those for whom English is a second language.

  17. Pengaruh penambahan Ca(OH2 pada Proses Pirolisis terhadap Hasil Gasifikasi Batubara Bituminus dengan medium Gas CO2

    Directory of Open Access Journals (Sweden)

    Saripah Sobah

    2014-06-01

    Full Text Available Pemanfaatan batubara melalui proses gasifikasi perlu dikembangkan lebih lanjut karena proses ini dapat dijadikan alternatif untuk menggantikan peranan  gas alam sebagai sumber gas sintesis. Di samping itu, proses ini dapat mengurangi pencemaran lingkungan karena teknologi gasifikasi merupakan teknologi yang bersih dan dapat mengurangi jumlah gas CO2 yang dibuang ke lingkungan. Penelitian ini bertujuan untuk mengetahui pengaruh penambahan Ca(OH2 pada proses pirolisis terhadap hasil gasifikasi arang batubara bituminus dengan medium gas CO2. Reaksi karbon dari arang batubara dengan gas CO2 pada proses gasifikasi merupakan reaksi endotermis dan berlangsung sangat lambat pada suhu di bawah 1000oC sehingga digunakan Ca(OH2 sebagai katalisator. Proses gasifikasi batubara dijalankan dalam reaktor fixed bed. Hasil penelitian menunjukkan bahwa gasifikasi arang batubara dengan penambahan Ca(OH2 pada proses pirolisis memberikan pengaruh terhadap komposisi gas hasil yaitu berkurangnya kadar gas CO2 dan menyebabkan berkurangnya kadar belerang pada arang hasil pirolisis dan gasifikasi. Proses ini juga dapat mengurangi kadar gas CO2 sebesar 63,17% dan untuk  gasifikasi tanpa Ca(OH2 , CO2 dapat dikurangi kadarnya sampai 35,2%.

  18. THE SHEPHERD AND THE ARTIST: IGNATIUS BRYANCHANINOV’S SPIRITUAL PROSE

    Directory of Open Access Journals (Sweden)

    Nataliya Viktorovna Prashcheruk

    2012-11-01

    Full Text Available The article looks at the works of St. Ignatius Bryanchaninov. His dialogue Christian Shepherd and Christian Artist (1851 reflects the holy bishop's views of art. In its highest form, art should follow the Gospel, said St. Ignatius. In this article we analyse his meditative prose (Ascetic Experience, A Word on Death, etc. A special focus is made on lyrical and philosophical autobiographic fragments which can be compared to Turgenev's Poems in Prose. These texts describe the moments of spiritual balance and inner peace which are rare in secular prose. Citing some fragments from Ascetic Experiences as an example, we show how “strong and profound spiritual impressions” take the shape of aesthetic expression. Our study of Ignatius Bryanchaninov's works led us to the notion of epiphanic vision and writing, and to a more general conclusion that these works can be described as belonging both to the patristic tradition and Russian literature.

  19. Fungsi dan Proses Pembuatan Topeng di Kabupaten Malang Jawa Timur

    Directory of Open Access Journals (Sweden)

    Robbi Hidajat

    2016-04-01

    Full Text Available AbstrakTopeng Malang adalah salah satu jenis topeng Jawa yang berkembang di Malang Jawa Timur. Memperhatikan bentuk raut topeng yang digambarkan tergolong dalam genre tokoh-tokoh lakon Panji. Topeng berfungsi sebagai properti seni pertunjukan Wayang Topeng. Penelitian ini merupakan kajian fungsi, baik dari sisi kegunaan material dan teknik pembuatan topeng. Permasalahan penelitian ini ada 2, yaitu (1 apakah fungsi Topeng Malang, (2 bagaimana teknik dan proses pembuatan Topeng Malang. Informan penelitian adalah perajin. Teknik pengumpulan data menggunakan observasi dan wawancara mendalam. Teknik analisis adalah interpretasi simbolis. Hasil penelitian ini adalah deskripsi tentang fungsi wayang topeng sebagai alat untuk menutup wajah penari agar sebagai bentuk penyamaran bagi penari agar dapat melakukan komunikasi spiritual dengan roh leluhur untuk mengharapkan berkah kesuburan. Teknik dan proses pembuatan Topeng Malang yaitu teknik ukir menggunakan pisau pangot. Proses pembuatannya terdiri dari 4 tahap, mbakali, wiwit, meraeni, dan maesi. Tiga tahap proses ini berelasi dengan proses penggarapan lahan sawah.Kata kunci: topeng, teknik, wayang, kerajinan AbstractMask of Malang is a type of Javanese masks which develop in Malang, East Java. From the face form, the masks portray the figures from Panji tales. The main function of the masks is as a property in Mask Puppet art performance. This research is a study of functions, both in terms of material usability and mask making techniques. The problems discussed in this study are, (1 what the mask of Malang's function is, (2 how the mask making technique and process are. Research informants are craftsmen. Data collection methods are by observation and interviews. Analysis methods are by symbolic interpretation. The results of this study are description of mask puppet as an equipment to cover the dancer's face, as a camouflage in order to communicate spiritually with ancestors' spirits to ask for

  20. Prose Learning for Veterinary Educators: Facilitating Acquisition

    Science.gov (United States)

    Harkness, John E.

    1978-01-01

    A prose text in veterinary medicine can be arranged and supplemented to facilitate efficient and effective acquisition into short-term memory. Methods include: variation in textual format; relating new information to previous knowledge and future goals; providing specific, test-relevant objectives or introductions, describing mnemonic devices; and…

  1. STRATEGI DAN PROSES BERPIKIR DALAM MENYELESAIKAN SOAL PEMECAHAN MASALAH BERDASARKAN TINGKAT KECEMASAN MATEMATIKA

    Directory of Open Access Journals (Sweden)

    Nurul Ismawati

    2015-03-01

    Full Text Available Strategi dan proses berpikir memiliki peran sangat penting dalam proses pemecahan masalah. Penelitian ini bertujuan untuk memperoleh deskripsi tentang strategi dan proses berpikir dalam menyelesaikan soal pemecahan masalah siswa kelas VII dengan tingkat kecemasan matematika tinggi, sedang, maupun rendah. Penelitian ini merupakan penelitian deskriptif dengan pendekatan kualitatif. Subyek dalam penelitian ini adalah 3 siswa dengan kecemasan matematika tinggi (KMT, 3 siswa dengan kecemasan matematika sedang (KMS, dan 3 siswa dengan kecemasan matematika rendah (KMR kelas VII MTs NU Nurul Huda Kudus. Penetapan subyek berdasarkan hasil tes skala kecemasan matematika. Hasil penelitian menunjukkan bahwa strategi dan proses berpikir diketahui sebagai berikut (1 tiga subyek KMT tidak dapat menggunakan sebagian besar tahapan strategi dan proses berpikir dalam menyelesaikan soal pemecahan masalah dengan tepat sehingga jawaban tidak tepat, (2 tiga subyek KMS dapat menggunakan sebagian besar tahapan strategi dan proses berpikir dalam menyelesaikan soal pemecahan masalah dengan tepat terhadap beberapa soal yang diberikan, dan (3 tiga subyek KMR dapat menggunakan sebagian besar tahapan strategi dan proses berpikir dalam menyelesaikan soal pemecahan masalah dengan tepat dan memperoleh jawaban tepat.Strategy and thinking process have a very important role in the process of problem solving. This study aimed to obtain a description of the strategies and thought processes in solving problem solving seventh grade students with mathematics anxiety levels. This research is a descriptive qualitative approach. Subjects in this study were three students with high math anxiety (KMT, 3 students with math anxiety medium (KMS, and 3 students with low math anxiety (KMR class VII MTs. NU NU Nurul Huda. Determination of the subject based on the results of tests of mathematics anxiety scale. The results showed that the strategies and thought processes KMT three subjects can not

  2. Perancangan Mesin Fish Dryer Menggunakan Tenaga Angin Untuk Mempercepat Proses Pengeringan Ikan

    OpenAIRE

    Waluyo, Ahmad Edi; Najib, M. Imha Ainun; Mutiasari, Erna; Inayah, Miftahul; Fiati, Rina

    2017-01-01

    Ikan merupakan bahan makanan yang banyak dikonsumsi masyarakat dalam dan bahkan luar negeri. Namun, ikan cepat membusuk karena adanya bakteri dan enzyme jika dibiarkan begitu saja tanpa proses pengawetan.salah satu cara yang digunakan untuk proses pengawetan ikan adalah dengan pengeringan dengan memanfaatkan energi matahari, hal tersebut kurang efektif karena waktu pengeringan yang lama, sangat bergantung pada cuaca dan ikan kurang higienis karena banyak bakteri yang menempel pada waktu penge...

  3. Aspek Keselamatan Kerja Pada Proses Pembentukan Batu Permata Menggunakan Mesin Gerinda

    Directory of Open Access Journals (Sweden)

    Anom Santiana

    2015-07-01

    Full Text Available Proses pengerjaan batu permata ini ada tiga tahapan yaitu proses pemotongan, prosespembentukan dan proses penghalusan. Pada proses pemotongan, bahan baku yang semulamasih berbentuk bongkahan batu baik batu pirus, batu akik, batu kecubung, dan semacamnyadipotong-potong menjadi bagian kecil dengan teknik tertentu dengan menggunakan gerindapotong. Selanjutnya adalah proses pembentukan, potongan batu yang sudah kecil dibentukdengan menggunakan gerinda asah. Bentuk batu permata disesuaikan dengan pesanankonsumen atau sesuai keinginan perajin sendiri. Sedangkan proses akhir pada pengerjaan batupermata ini adalah menggosok atau mengasah batu permata tersebut biar licin dan menggkilap.Dalam setiap proses ini tentunya mempunyai resiko terhadap kecelakaan kerja. Bahaya-Bahayadari Mesin gerinda ini antara antara lain adalah putaran grinda yang sangat cepat, terbentur olehbarang-barang yang terlempar keluar dari mata asah mesin gerinda, Percikan api yang keluar, jaritangan terpotong, debu yang keluar, dan sebagainya. Untuk itu dilakukan observasi terhadap 12orang pekerja perajin batu permata di Karangasem Bali. Gerinda yang digunakan adalah gerindatangan, beban kerja dihitung berdasarkan denyut nadi, keluhan otot diprediksi denganmenggunakan nordic body map. Hasil penelitian menunjukkan bahwa aspek keselamatan yangharus diperhatikan oleh perajin adalah penggunaan APD (alat pelindung diri seperti sarung tangan,masker, dan kaca mata, perubahan Sikap Kerja agar lebih alamiah, dan pengaturan waktu kerja.Untuk itu diperlukan pemahaman prosedur kerja sebelum menggunakan gerinda tangan dalampembentukan batu permata pada perajin sebelum menggunakan mesin gerinda.Kata Kunci : Aspek Keselamatan, Mesin Gerinda, perajin batu permata There are three stages in gemstones processing namely the cutting , forming and polishingprocesses. In the cutting process, the raw materials are initially still a good chunk of stone ofturquoise, agate, amethyst, and the like is cut into

  4. ANALISIS PROSES PEMBELAJARAN DALAM KONSEP PEMBERDAYAAN KELOMPOK TANI

    Directory of Open Access Journals (Sweden)

    Dani Ari Setiawan

    2017-08-01

    Full Text Available The purpose of this research is analyzing the role of agricultural extension Hall (BPP, analyze the process stages of the occurrence of agricultural learning, and analyze agricultural learning model on a group of farmers. This qualitative research methods are case studies. Data collection techniques: interviews, observation and study of the document. The result is that (1 the existence of the role of agricultural extension officers as education, dissemination of information/innovation facilitators, consultants, supervision, monitors and evaluators, (2 the learning process starts from his protégé participant fedback or, the lesson process, then the output or outputs of learning outcomes to farmers, and (3 learning Models include (a Airy School Integrated pest control (SLPHT; (b Pilot planting padi cultivation; (c guidance techniques; d exercises and visits; (e planting synchronously. Tujuan penelitian ini adalah menganalisis peran Balai Penyuluhan Pertanian (BPP, menganalisis proses tahapan terjadinya pembelajaran pertanian, dan menganalisis model pembelajaran pertanian pada kelompok tani. Metode penelitian ini berupa kualitatif studi kasus. Teknik pengumpulan data, meliputi wawancara, observasi, dan studi dokumen. Hasilnya bahwa (1 adanya peran penyuluh pertanian sebagai edukasi, diseminasi informasi/inovasi fasilitator, konsultan, supervisi, pemantau dan evaluator, (2 proses Pembelajaran dimulai dari masukan atau peserta didiknya, proses pembelajarannya, kemudian keluaran dari hasil pembelajaran kepada petani, dan (3 model pembelajaran, meliputi (a Sekolah Lapang Pengendalian Hama Terpadu (SLPHT; (b percontohan budidaya tanam padi; (c bimbingan teknik; (d Latihan dan Kunjungan (LAKU; (e tanam serempak.

  5. Evaluasi proses bimbingan skripsi mahasiswa Universitas Negeri Yogyakarta berdasar perspektif pembelajaran orang dewasa

    OpenAIRE

    Sugito Sugito; Sunaryo Soenarto; Entoh Tohani

    2017-01-01

    Dalam menghadapi tantangan dan permasalahan abad kedua puluh satu ini, pendidikan tinggi memiliki peran yang sangat strategis. Mata kuliah Skripsi dapat berperan untuk mengembangkan kemampuan guna menghadapi tantangan dan masalah yang dihadapi. Penelitian ini bertujuan untuk mengevaluasi proses pembimbingan skripsi dari perspektif teori pembelajaran orang dewasa, hambatan dan upaya yang dilakukan mahasiswa dan dosen dalam proses penulisan skripsi mahasiswa Universitas Negeri Yogyakarta (UNY)....

  6. A COMPUTER ANALYSIS OF FICTIONAL PROSE STYLE.

    Science.gov (United States)

    KROEBER, KARL

    FUNDAMENTAL CHARACTERISTICS OF FICTIONAL PROSE STYLE WERE STUDIED THROUGH SYSTEMATIC AND OBJECTIVE ANALYSES OF NOVELISTIC SYNTAX AND VOCABULARY. SAMPLE PASSAGES FROM THE MAJOR NOVELS OF JANE AUSTEN, THE BRONTE SISTERS, AND GEORGE ELIOT AS WELL AS NOVELS BY 13 OTHER AUTHORS WERE ANALYZED. INFORMATION ON PASSAGE SENTENCES, CLAUSES, AND WORDS WAS…

  7. Põhja-Küprose liider soovib isolatsiooni lõppemist / Mehmet Ali Talat ; interv. Erkki Bahovski

    Index Scriptorium Estoniae

    Talat, Mehmet Ali

    2004-01-01

    Põhja-Küprose liidri väitel soovib türklaste kogukond diplomaatilise tunnustuse asemel isolatsiooni lõppemist. Intervjuus käsitletavad teemad: Küprose saare tulevik, liitumine Euroopa Liiduga, Türgi liitumine euroliiduga. Lisad: Kahe kogukonna - kreeklaste ja türklaste - vahel lõhestatud Küpros; Mehmet Ali Talat

  8. Sistem Monitoring Proses Produksi pada Mesin Bardi di PT. Tirta Investama (Danone Aqua Sukabumi Berbasis Web

    Directory of Open Access Journals (Sweden)

    Heri Haryanto

    2016-03-01

    Full Text Available Proses produksi pengisian air Aqua galon menggunakan mesin Bardi di PT. Tirta Investama Aqua Danone Sukabumi memiliki parameter-parameter proses yang harus selalu dipantau, sehingga jika terjadi nilai parameter yang melebihi atau kurang dari batas toleransi yang diberikan dapat segera dilakukan tidakan intervensi untuk menghindari terjadi kerusakan atau hal-hal yang tidak diinginkan. Sistem monitoring parameter proses produksi berbasis web dapat dimanfaatkan untuk memantau parameter-parameter pada mesin Bardi. Sistem ini terdiri atas perangkat keras dan perangkat lunak. Perangkat keras terdiri atas sensor-sensor yang dipasang pada mesin Bardi yang menghasilkan sinyal analog yang kemudian oleh PLC Allen Bradley data akan dikonversi menjadi data digital. Data akan dikirimkan secara real-time dan disimpan pada database server komputer dan disinkronisasikan dengan web server. Perangkat lunak pada pemograman website menggunakan Adobe Dreamweaver CS6 sebagai kontrol visual dan tampilan data menggunakan bahasa pemograman PHP dan database MySQL. Sistem monitoring proses produksi dapat memantau parameter-parameter mesin Bardi serta mentransmisikan data perubahan parameter proses produksi yang ditampilkan melalui aplikasi web.

  9. Prose recall and amnesia: implications for the structure of working memory.

    Science.gov (United States)

    Baddeley, Alan; Wilson, Barbara A

    2002-01-01

    Two densely amnesic patients are shown to have good immediate but poor delayed prose recall, a result that presents problems for the current multi-component model of working memory. Examination of a wide sample of memory impaired patients suggests that this pattern occurs in densely amnesic patients who have well-preserved intelligence and good executive capacities. Patients suffering from Alzheimer's disease typically show poor immediate and delayed prose recall, reflecting their combined intellectual and memory deficits. The results are interpreted in terms of a proposed new component of working memory, the episodic buffer.

  10. Proses Knowledge Management di Semen Indonesia Group

    OpenAIRE

    Putri, Natalia Yan

    2017-01-01

    Penelitian ini dilakukan untuk mengetahui prosesknowledge management yang ada di Perusahaan Semen IndonesiaGroup, yakni PT Semen Gresik, PT Semen Padang, PT SemenTonasa. Proses knowledge management dapat dilakukan denganpenciptaan pengetahuan, berbagi pengetahuan dan penggunaankembali pengetahuan. Penelitian ini menggunakan metodekualitatif dengan wawancara. Validasi data menggunakan codingdan uji triangulasi sumber data dan teori.

  11. Studi Implementasi Six Sigma pada Tahap Fabrikasi dalam Proses Pembangunan Kapal Baru

    Directory of Open Access Journals (Sweden)

    Jauhary Tsulastsy Yanuar

    2013-03-01

    Full Text Available Proses produksi pada tahap fabrikasi dalam proses pembangunan kapal baru masih memiliki masalah defect pada output proses produksi berupa defect dimension yang menyebabkan rework (pekerjaan tambahan. Tugas akhir ini bertujuan untuk menentukan besarnya sigma proses tahap fabrikasi dari sebuah galangan kapal yang menjadi studi kasus, mengidentifikasi penyebab yang mempengaruhi defect, dan menentukan upaya-upaya yang dilakukan untuk meminimasi defect menggunakan metode six sigma DMAIC (Define, Measure, Analyze, Improve dan Control. Berdasarkan perhitungan menggunakan lembar kerja perhitungan sigma yang dikeluarkan oleh pivotal resources, komponen plate mengalami defect dimension sebesar 0,36% untuk hasil marking dan 0,48% untuk hasil proses cutting menghasilkan nilai sigma 2,2074, komponen bracket mengalami defect dimension sebesar 0,28% untuk hasil marking dan 0,40% untuk hasil cutting menghasilkan nilai sigma 2,3429, komponen stiffener mengalami defect dimension sebesar 0,20% untuk hasil marking dan 0,24% untuk hasil cutting menghasilkan nilai sigma 2,6771, dan  komponen clip (collar plate mengalami defect dimension sebesar 0,28% untuk hasil marking dan 0,36% untuk hasil cutting menghasilkan nilai sigma 2,4171. Berdasarkan hasil analisa, nilai sigma tersebut masih jauh dari nilai yang seharusnya dapat dicapai oleh suatu perusahaan (6σ disebabkan oleh faktor antara lain keterampilan SDM yang belum memadai saat ini, PMS (Planned Maintenance System yang berjalan tidak sesuai prosedur, dan tidak dilakukannya pendokumentasian/kontrol pada setiap komponen hasil tahap fabrikasi. Dengan menggunakan metode FMEA (Failure Mode and Effect Analysis yang dikorelasikan dengan berbagai analisa, diperoleh solusi antara lain diperlukannya training/pelatihan untuk meningkatkan skill/kemampuan SDM baru, dijalankannya PMS sesuai prosedur, dan menghidupkan kembali tim QC yang tergabung dalam keorganisasian bengkel fabrikasi. Implementasi six sigma dilakukan secara

  12. PENINGKATAN KUALITAS PROSES DAN HASIL BELAJAR MATA KULIAH TEORI AKUNTANSI MELALUI PENDEKATAN DISCOVEY LEARNING

    Directory of Open Access Journals (Sweden)

    Agus Yulianto

    2007-06-01

    Full Text Available Hakekat belajar yang sesungguhnya adalah belajar yang tidak hanya sekedar mendengarkan dosen mengajar, tapi mahasiswa harus mampu mengembangkan wacana pengetahuan yang diperoleh melalui proses pencarian berbagai sumber. Proses transfer belajar harus mampu membekali mahasiswa dengan pengetahuan yang secara fleksibel dapat diterapkan/ditransfer dari satu permasalahan ke satu permasalahan yang lain. Dalam pembeljaran menempatkan mahasiswa sebagai pembelajar dimana memberikan kesempatan kepada siswa mempelajari hal-hal yang baru dan dosen dengan strategi belajarnya memfasilitasi agar informasi baru bermakna. lingkungan belajar juga mempunyai posisi yang penting sehingga pengajaran harus berpusat pada bagaimana cara mahasiswa menggunakan pengetahuan baru mereka. Pendekatan pembelajaran yang berbasis discovery learning (DL, peran pendidik harus mampu menciptakan situasi, dimana mahasiswa dapat belajar sendiri daripada memberikan paket yang berisi informasi atau pelajaran, sehingga pengetahuan diperoleh melalui proses bukan produk. Keuntungan cara belajar ini yang diungkap oleh Martin (1975, ada dua hal penting yaitu; (1 menimbulkan keingin tahuan, memotivasi untuk menemukan jawaban, (2 menimbulkan kemandirian dengan menganalisis, memanipulasi informasi. Kata Kunci: discovery learning, kualitas proses dan hasil belajar

  13. PENINGKATAN KUALITAS PROSES DAN HASIL BELAJAR MATA KULIAH TEORI AKUNTANSI MELALUI PENDEKATAN DISCOVEY LEARNING

    Directory of Open Access Journals (Sweden)

    Agus Yulianto

    2011-06-01

    Full Text Available Hakekat belajar yang sesungguhnya adalah belajar yang tidak hanya sekedar mendengarkan dosen mengajar, tapi mahasiswa harus mampu mengembangkan wacana pengetahuan yang diperoleh melalui proses pencarian berbagai sumber. Proses transfer belajar harus mampu membekali mahasiswa dengan pengetahuan yang secara fleksibel dapat diterapkan/ditransfer dari satu permasalahan ke satu permasalahan yang lain. Dalam pembeljaran menempatkan mahasiswa sebagai pembelajar dimana memberikan kesempatan kepada siswa mempelajari hal-hal yang baru dan dosen dengan strategi belajarnya memfasilitasi agar informasi baru bermakna. lingkungan belajar juga mempunyai posisi yang penting sehingga pengajaran harus berpusat pada bagaimana cara mahasiswa menggunakan pengetahuan baru mereka. Pendekatan pembelajaran yang berbasis discovery learning (DL, peran pendidik harus mampu menciptakan situasi, dimana mahasiswa dapat belajar sendiri daripada memberikan paket yang berisi informasi atau pelajaran, sehingga pengetahuan diperoleh melalui proses bukan produk. Keuntungan cara belajar ini yang diungkap oleh Martin (1975, ada dua hal penting yaitu; (1 menimbulkan keingin tahuan, memotivasi untuk menemukan jawaban, (2 menimbulkan kemandirian dengan menganalisis, memanipulasi informasi. Kata Kunci: discovery learning, kualitas proses dan hasil belajar

  14. Pengolahan Limbah Rumah Makan dengan Proses Biofilter Aerobik

    Directory of Open Access Journals (Sweden)

    Laily Zoraya Zahra

    2015-03-01

    Full Text Available Berkembangnya rumah makan/restoran yang semakin pesat dapat dipastikan akan turut menambah buangan air limbah domestik dengan kadar organik yang tinggi dalam jumlah yang tidak sedikit yang dibuang ke badan air.Tingginya kadar organik dalam limbah domestik rumah makan akan menyebabkan aroma yang tidak sedap jika tidak ada pengolahan terlebih dahulu, maka pengolahan yang dapat digunakan untuk mengolah air limbah rumah makan tersebut adalah proses biofilter aerobik. Penelitian dilakukan dengan proses biofilter aerobik dengan aliran downflow dan menggunakan sistem intermitten.Variabel dalam penelitian ini adalah media biofilter berupa kerikil dan batu alam serta Hydraulic Retention Time (HRT 8 jam. Parameter pencemar yang diukur efisiensinya adalah BOD, COD, dan TSS. Besarnya penyisihan parameter BOD, COD dan TSS dengan menggunakan biofilter aerob berturut-turut mencapai 94,83%, 92,95%, dan 95%. Reaktor paling baik dalam mengolah air limbah adalah reaktor biofilter dengan media kerikil pada HRT 8 jam.

  15. Implementasi Sistem Jaminan Mutu (Quality Assurance Proses Pembelajaran di Perguruan Tinggi

    Directory of Open Access Journals (Sweden)

    Ari Basuki

    2004-06-01

    Full Text Available Penelitian ini bertujuan untuk memonitor implementasi sistem jaminan mutu (Quality Assurance proses pembelajaran jenjang SI di Jurusan Manajemen Fakultas Ekonomi Unhrersitas Gadjah Mada. Fokus penelitian melipuri proses pelaksanaan, problema yang dihadapi, serta dampak atau perubahan yang dihasilkannya. Model penelitian yang digunakan ialah monitoring kebijakan yang diadopsi dan teori William N. Dunn. Teknik pengumpulan data dilakukan dengan wawancara, dokumentasi, dan kuesioner. Responden yang dipilih dalam penelitian ini ialah Wakil Dekan Bidang Akademik Fakultas Ekonomi UGM, Ketua Jurusan Manajemen, Direktur Eksekutif QUE-Project Jurusan Manajemen, Dosen Jurusan Manajemen, para Kepala Sub Bagian, serta 200 mahasiswa Jurusan Manajemen yang dipilih secara acak. Teknik analisis data dilakukan dengan sajian tabel, sajian grafik, dalam hubungannya dengan fungsi monitor­ing yaittu compliance (kepatuhan, eksplanasi, auditing (pemeriksaan, dan akuntansL Temuan pokok dalam penelitian ini ialah pelaksanaan sistem jaminan mutu proses pembelajaran di Jurusan Manajemen Fakultas Ekonomi UGM secara eksplisit dimulai sejak Jurusan ini menerima dukungan dana QUE-Project pada tahun 1998. Pelaksanaan program berjalan dan berhasil baik karena komitmen para pelaku, manajemen bagus dengan indikator yang bisa diukur, dan dukungan dana yang memadai. Dampak positif yang terjadi antara lain: (1 terciptanya kultur organisasi yang makin kondusif, (2 peningkatan mutu kinerja dosen, (3 mutu proses pembelajaran yang cukup baik, dan (4 tingkat kepuasan mahasiswa yang cukup tinggL Adapun problema yang dihadapi antara lain: (1 keterbatasan SDM karena cukup banyaknya dosen yang sedang menempuh studi lanjut, dan (2 tidak mudahnya mengintegrasikan antara penilaian kinerja dengan reward and punishment system. Kata kunci: sistem jaminan mutu, pembelajarun diperguruan tinggL

  16. A Word Count of Modern Arabic Prose.

    Science.gov (United States)

    Landau, Jacob M.

    This book presents a word count of Arabic prose based on 60 twentieth-century Egyptian books. The text is divided into an alphabetical list and a word frequency list. This word count is intended as an aid in the: (1) writing of primers and the compilation of graded readers, (2) examination of the vocabulary selection of primers and readers…

  17. Pengolahan Lindi Menggunakan Moving Bed Biofilm Reactor dengan Proses Anaerobik-Aerobik-Anoksik

    Directory of Open Access Journals (Sweden)

    Nuriflalail Rio Jusepa

    2017-01-01

    Full Text Available Lindi mengandung konsentrasi organik, Total Kjeldahl Nitrogen, amonium, nitrit dan nitrat yang tinggi sehingga lindi yang tidak diolah dapat mencemari lingkungan. Pengolahan biologis dengan sistem fluidized attached growth seperti Moving Bed Biofilm Reactor (MBBR dapat digunakan untuk menurunkan senyawa organik dan senyawa nitrogen. Konsentrasi organik dan nitrogen yang tinggi pada lindi dapat diolah dengan mengatur proses aerobik-anaerobik-anoksik di dalam MBBR. Kapasitas pengolahan MBBR yang digunakan sebesar 10 L dan media Kaldness (K1 sebanyak 2 L. MBBR dioperasikan dengan sistem batch, dengan kondisi aerobik yang berasal dari aerator dan pompa submersible, kondisi anaerobik berasal dari pompa submersible saja, dan kondisi anoksik yang berasal dari pompa submersible dan aerator. Hasil penelitian ini menunjukkan bahwa MBBR dapat digunakan untuk menurunkan senyawa nitrogen dan senyawa organik. Efisiensi penyisihan optimum senyawa organik sebesar 87% pada proses anaerobik baik pada sistem fluidized attached growth maupun suspended growth. Efisiensi penyisihan optimum senyawa nitrogen sebesar 72% pada proses anoksik baik pada sistem fluidized attached growth maupun suspended growth.

  18. prose president ootab Türgilt inimõiguste täitmist / Tassos Papadopoulos ; interv. Erkki Bahovski

    Index Scriptorium Estoniae

    Papadopoulos, Tassos

    2004-01-01

    Eestis viibinud Küprose president ei ole vastu Türgiga liitumiskõneluste alustamisele, ta loodab Euroopa Liidu abile saare ühendamisel. Intervjuus käsitletakse veel Euroopa Liidu põhiseaduslikku lepet, Eesti - Küprose suhteid. Lisa: Tassos Papadopoulos. Kaart

  19. Pengaruh Proses Delignifikasi Pada Produksi Glukosa Dari Tongkol Jagung Dengan Hidrolisis Asam Encer

    OpenAIRE

    Mardina, Primata; Talalangi, Adelina I; Sitinjak, Jhon F. M; Nugroho, Andri; Fahrizal, M. Reza

    2013-01-01

    Hidrolisis asam encer dari tongkol jagung untuk produksi glukosa mengalami hambatan karena adanya lignin. Penelitian ini bertujuan mengetahui pengaruh dari proses Perusakan lignin dengan proses menggunakan hidrolisis basa Hidrolisis basa yang biasa disebut delignifikasi dilakukan pada suhu 55oC selama 4 jam dengan konsentrasi larutan basa, yaitu NaOH 5%, 10% dan 15% berat Hasil menunjukkan bahwa konsentrasi NaOH yang optimal untuk pengurangan lignin adalah 15% berat dengan persentase penguran...

  20. REDUKSI AKTIVITAS URANIUM DALAM LIMBAH RADIOAKTIF CAIR MENGGUNAKAN PROSES ELEKTROKOAGULASI

    Directory of Open Access Journals (Sweden)

    Prayitno Prayitno

    2017-01-01

    Full Text Available ABSTRAK REDUKSI AKTIVITAS URANIUM DALAM LIMBAH RADIOAKTIF CAIR MENGGUNAKAN PROSES ELEKTROKOAGULASI. Limbah yang dihasilkan dari proses pengembangan bahan industri bersifat radioaktif yang mengandung uranium yang dapat menimbulkan dampak negatif pada manusia dan lingkungan. Pengolahan limbah radioaktif pada saat ini masih banyak menggunakan bahan-bahan kimia.Penambahanbahan kimiauntuk mereduksi bahan pencemar dinilai kurang efisien karena kurang ramah lingkungan, memerlukan waktu yang lama, dan biaya yang mahal. Untuk itu akan diterapkan metode proses elektrokoagulasi untuk menurunkan aktivitas uranium dari larutan limbah cair. Tujuan penelitian ini adalah untuk mengetahui efisiensi penurunan aktivitas uranium dalam limbah radioaktif cair yang dihasilkan pada proses elektrokoagulasi dengan variasi tegangan, waktu tinggal, jarak elektroda dan pH inlet limbah. Limbah simulasi yang digunakan memiliki kadar kontaminan uranium sebesar 500 mg/L. Percobaan ini dilakukan dengan metode batch dengan elektroda aluminium. Hasil penelitian diperoleh parameter optimal pada tegangan 12,50 V, jarak 1 cm, pH 7, dan waktu proses selama 60 menit diperoleh efisiensi penurunan limbah uranium sebesar 97,20 %. Kata Kunci:elektrokoagulasi, reduksi limbah uranium, tegangan, aluminium. ABSTRACT REDUCTION OF URANIUM ACTIVITIES IN LIQUID WASTE RADIOACTIVE BY USING OF ELCTROCOAGULATION PROCESS.  Waste generated from the process of the industrial material development one of which waste containing uranium radioactive, can have negative impact on humans and the environment. In  the present time, chemicals are still mostly use in radioactive waste treatment. To reduce pollutants with the use of chemicals is less efficient, because less environmentally friendly, take long time and costly. Therefore, a system of electrocoagulation process will be applied to decrease the activity of uranium from waste solution. The purpose of this study is to determine the efficiency of uranium

  1. Episodic and Semantic Aspects of Memory for Prose.

    Science.gov (United States)

    Dooling, D. James

    This report describes research on Bartlett's theory of constructive memory. In experiment one, schematic retention is related to Tulving's distinction between episodic and semantic memory. With the passage of time, memory for prose reflects decreasing output from episodic memory and increasing output from semantic memory. In experiment two,…

  2. Gambaran Respon Anak Usia Prasekolah dalam Menjalani Proses Transfusi

    Directory of Open Access Journals (Sweden)

    Meila Sabridatia Putri

    2017-09-01

    Full Text Available Tindakan transfusi darah yang dilakukan pada anak usia prasekolah yang mengalami talasemia membuat anak merasa terancam. Hal ini ditunjukkan oleh anak dengan berbagai respon (kognitif, afektif, fisiologis, perilaku dan sosial anak prasekolah dalam menjalani proses transfusi. Tujuan penelitian ini adalah mengetahui gambaran respon kognitif, afektif, fisiologis, perilaku dan sosial pada anak usia prasekolah dalam menjalani proses transfusi di Poli Talasemia RSUP Dr. Hasan Sadikin Bandung. Penelitian ini menggunakan metode deskriptif kuantitatif dengan sample sebanyak 50 orang selama periode 3–13 Juni 2014 diambil dengan teknik insidental sampling. Hasil penelitianini dianalisis dengan menggunakan rumus distribusi frekuensiPenelitian yang sudah dilakukan, didapatkan hasil respon yang paling banyak ditunjukkan oleh anak prasekolah ketika proses transfusi berlangsung adalah hampir seluruhnya menunjukkan respon sosial (84% dengan jenis respon terbanyak ialah meminta dukungan emosional pada orang yang bermakna, hampir seluruhnya menunjukkan respon afektif (74% dengan jenis respon terbanyak adalah mengeluarkan ekspresi verbal, sebagian besar menunjukkan respon perilaku (66% dengan jenis respon terbanyak adalah memukul-mukulkan lengan dan kaki dan juga respon kognitif (72% dengan jenis respon terbanyak gelisah, dan hampir setengahnya dari responden menunjukkan respon fisiologis (34% dengan jenis respon terbanyak bernapas cepat. Simpulan penelitian ini adalah bahwa presentase respon terbesar yang dikeluarkan oleh anak usia prasekolah berupa respon sosial dengan jenis meminta dukungan emosional pada orang bermakna. Saran bagi instansi pendidikan dan rumah sakit untuk bisa berkontribusi mengembangkan asuhan keperawatan pada orang yang paling dekat pada anak sebelum tindakan invasif.

  3. PENGEMBANGAN KETERAMPILAN PROSES DAN PEMAHAMAN SISWA KELAS X MELALUI KIT OPTIK

    Directory of Open Access Journals (Sweden)

    - Widayanto

    2011-09-01

    Full Text Available Keterampilan proses sains sangat diperlukan sebagai dasar agar siswa mampu memecahkan masalah. Ketrampilan proses sains dapat dilatihkan melalui kegiatan laboratorium. Dengan memanfaatkan kit optik peneliti bertujuan meningkatkan keterampilan proses sains dan pemahaman materi fisika bagi siswa SMA. Subyek penelitian adalah siswa kelas X-C SMA 3 Sragen tahun ajaran 2006/2007. Hasil penelitian menunjukkan bahwa pemanfaatan kit optik dalam pembelajaran dapat meningkatkan pemahaman dan keterampilan proses sains siswa. Skor rata-rata pemahaman siswa pada siklus I sebesar 73,27 dengan ketuntasan belajar secara  klasikal  sebesar  80,49%,  sedangkan  siklus II  skor  rata-rata  adalah  84,20  dengan  ketuntasan klasikal  sebesar  100%. Sedangkan prosentase rata-rata keterampilan proses sains siswa pada siklus I sebesar 77,37% dan siklus II sebesar 87,36%.The science process skills play an important role as basic for students in solving their problems and can be developed through laboratory activities. By using optical kit, we aim increasing science process skill and understanding physics matter for students. The research subject is X-C Class Senior High School 3 Sragen academic year 2006/2007. The research result show that the use of optical  kit  in  the  learning  can increase  understanding  and  science  process  skill  of students.  The  average  score  of  students understanding at cycle I equals to 73,27 with mastery of learning as much as 80,49%, while that of the cycle II equals to 84,20% with the classically mastery of learning 100%. In addition, the average percentages of students science process skill at cycle I and II are 77,37% and 87,36% respectively© 2009 Jurusan Fisika FMIPA UNNES SemarangKeywords: mastery of learning; optical kit; learning process

  4. Aplikasi Proses Pengkelatan untuk Peningkatan Mutu Minyak Nilam Aceh

    Directory of Open Access Journals (Sweden)

    Pocut Nurul Alam

    2007-12-01

    Full Text Available Industri kecil minyak nilam di Nanggroe Aceh Darussalam tersebar di beberapa kabupaten yaitu Aceh Barat, Aceh Selatan, Aceh Jaya, dan beberapa daerah lainnya. Namun perolehan dan mutu minyak nilam yang dihasilkan masih tergolong rendah karena warna minyak coklat kehitaman. Untuk meningkatkan kualitas dan nilai jualnya, bisa dilakukan dengan beberapa proses pemurnian baik secara fisika maupun secara kimia. Untuk peningkatan kualitas tersebut dapat dilakukan antara lain dengan menurunkan kandungan Fe yang membuat warna minyak menjadi gelap. Hasil penelitian menunjukkan bahwa proses pemurnian dengan menggunakan senyawa pengkelat Na-EDTA sebagai senyawa pengkelat dalam pemurnian minyak nilam dapat menurunkan kandungan Fe (besi secara signifikan sebesar 60% untuk minyak nilam yang diperoleh dari hasil penyulingan petani di daerah Aceh Barat dan Aceh Selatan. Selain itu, minyak yang dihasilkan berwarna lebih cerah dan karakteristiknya memenuhi persyaratan mutu standar. Kata kunci: minyak nilam, pemurnian, pengkelat

  5. SINTESA GULA DARI SAMPAH ORGANIK DENGAN PROSES HIDROLISIS MENGGUNAKAN KATALIS ASAM

    Directory of Open Access Journals (Sweden)

    Deddy Irawan

    2012-11-01

    Full Text Available SYNTHESIS OF SUGAR FROM ORGANIC WASTES VIA ACID CATALYSTHYDROLYSIS. Hydrolysis process is an important step from every process to produce biofuel withorganic wastes as raw material. Hydrolysis process with chemical uses hydrochloride acid as catalystin which will transform holocellulose to glucose. Raw material of 100 grams is put into hydrolysisreactor with batch system equipped with pressure control and ratio hydrochloride of 1 : 6 w/v. Thevariables studied were temperature of 110-140oC, HCl concentration of 0.5-1%, time of hydrolysis of15-60 minutes. The sugar concentration was taken and then be analyzed by Nelson-Somogy method.The hydrolysis, which was carried out with the temperature of 120oC, time of 30 minutes, HClconcentration of 0.75%, and the pressure of 6 bar, produced sugar reduction of 27.3 mg/mL and yieldof 15.07%. Proses hidrolisis merupakan satu tahap penting dari rangkaian tahapan proses produksi bahan bakarnabati menggunakan bahan baku sampah organik. Proses hidrolisis secara kimiawi menggunakanHCl sebagai katalis akan mengubah holoselulosa yang terdapat pada sampah organik menjadi gula.Gula yang dihasilkan inilah yang dapat difermentasi menjadi bahan bakar nabati. Bahanbaku sebanyak 100 g dimasukkan dalam reaktor hidrolisis sistem batch yang dilengkapi denganpengukur tekanan dan ditambahkan larutan HCl pada perbandingan 1:6 b/v. Hidrolisis dilakukandengan memvariasikan suhu operasi 100-140oC, waktu proses 15-60 menit, serta konsentrasi HCl 0,5-1%. Hidrolisat yang dihasilkan dianalisis kadar gula menggunakan metode Nelson-somogy. Hasilhidrolisis yang dilakukan pada suhu 120oC selama 30 menit serta konsentrasi HCl 0,75% dan tekananterukur 6 bar menghasilkan gula 27,30 mg/mL dan yield gula sebesar 15,07%.

  6. PERAN BADAN REINTEGRASI DAMAI ACEH DALAM PROSES GENCATAN SENJATA, DEMOBILISASI, DAN REINTEGRASI DI ACEH

    Directory of Open Access Journals (Sweden)

    - Fakhrurrazi

    2013-04-01

    Full Text Available Badan Reintegrasi Damai Aceh (BRDA didirikan berdasarkan Nota Kesepahaman Helsinki yang ditandatangani 15 Agustus 2005, khususnya pasal 3.2 yang menyatakan tentang reintegrasi bekas anggota GAM. Beragam upaya reintegrasi telah dilakukan oleh pemerintah melalui pendekatan ekonomi, sosial, budaya, politik dan keamanan. Namun beragam hambatan muncul dalam proses reintegrasi mantan anggota GAM serta dalam implementasi proses tersebut yang dikawal oleh BRDA.Menggunakan konsep analisis wacana, dalam penelitian ini, penulis berupaya menggambarkan peran BRDA dalam proses reintegrasi mantan anggota GAM kedalam masyarakat serta hambatan-hambatan yang dihadapi dalam proses tersebut. Hasil penelitan menunjukkan bahwa muncul berbagai hambatan dalam proses reintegrasi mantan anggota GAM yakni hambatan dalam bidang ekonomi; hambatan dalam bidang politik, hukum dan keamanan; serta hambatan dalam bidang sosial budaya. BRDA juga terlihat belum optimal dalam menangani proses reintegrasi, masih terdapat banyak kekurangan.Aceh Peace Reintegration Institution (APRI was established based on Helsinki Memorandum of Understanding signed on August 15, 2005, especially article 3.2 states about reintegration of GAM (Freedom Aceh Movement ex-combatant. Various reintegration efforts have been done by the overnment through economic, social, cultural, political, and security approaches. However, many obstacles appeared in the process of reintegration of ex GAM combatant, and in the management of this process by Aceh Peace Reintegration Institution (BRDA. Using the concept of discourse analysis, in this research, the author attempts to describe the role of BRDA in the reintegration process of GAM ex-combatant to adapt in society and how Aceh Peace Reintegration Institution as the authority board managing the reintegration process play its role. Using the concepts of conflict and integration, the study seeks to describe the process of reintegration of former GAM members into

  7. Pengaruh Simultan Parameter Suhu dan Konsentrasi Larutan NaOH Terhadap Kuantitas dan Kualitas Hasil Cellulose Powder pada Proses Delignifikasi Tongkol Jagung

    Directory of Open Access Journals (Sweden)

    Suprianto Suprianto

    2015-08-01

    Full Text Available Jagung merupakan sumber karbohidrat ketiga di Indonesia setelah padi dan ketela. Produksi jagung Indonesia meningkat terus menerus selama 10 tahun terakhir, yang diikuti dengan konsekuensi meningkatnya tongkol jagung sebagai produk ikutan pertanian jagung. Jumlah tongkol jagung dapat mencapai 40% dari produksi jagung. Fakta ini menunjukkan semakin tinggi potensi tongkol jagung untuk dapat dimanfaatkan bagi penunjang kehidupan manusia. Pemanfaatan tongkol jagung secara langsung sebagai bahan bakar maupun tidak langsung, yaitu melalui tahapan proses fisika dan kimia, sebelum dimanfaatkan langsung, telah mulai banyak menarik perhatian. Penelitian ini dimaksudkan untuk menambah informasi pengolahan tongkol jagung menghasilkan selulosa powder yang dapat digunakan sebagai cellulose gel, selulose membrane filter penjernihan air maupun sebagai bahan baku turunan senyawa selulosa, seperti selulosa asetat, carboxy methyl cellulose dan nitro selulosa.Proses pengolahan tongkol jagung menjadi cellulose prowder dilakukan dalam tiga tahapan proses, masing-masing untuk menghilangkan komponen hemiseluola, lignin dan warna dalam tongkol jagung. Proses tahap pertama menggunakan larutan asam nitrat 7,5% pada suhu 80 o C selama 2 jam, dilanjutkan dengan proses tahap kedua menggunakan larutan NaOH selama 2 jam dengan variasi suhu 80 sampai 100 o C dan variasi konsentrasi NaOH dari 1 N sampai 3 N dan selanjutnya proses tahap ketiga menggunakan hydrogen peroksida dengan konsentrasi 4%, suhu 80 o C dan waktu 2 Jam. Keberhasilan proses diidentifikasi dengan kuantitas dan kualitas hasil cellulose powder.Hasil penelitian menunjukkan bahwa kondisi proses yang baik dalam tahap proses delignifikasi adalah suhu antara 85 sampai 95 o C dan konsentrasi NaOH antara 1,25 N sampai 2 N. Produk pengolahan dari tongkol jagung, dengan proses tiga tahap ini diperoleh hasil cellulose powder warna putih dengan kadar   selulosa sekitar 88 sampai 90%, dengan yield investor sekitar 30

  8. Proses Berpikir Siswa SD dalam Melakukan Estimasi Masalah Berhitung Berdasarkan Jenis Kelamin

    Directory of Open Access Journals (Sweden)

    Muh. Rizal

    2013-01-01

    Full Text Available Abstract: The Thinking Process of Primary-school Students of Different Sexes in Estimating Arithmetic Problems. This case study is intended to explore the thinking process of the fifth-year students of different sexes in estimating arithmetic problems. Two students, one male and one female, belonging to the high achievers in a mathematics test were selected for the study and then interviewed, assigned to solve arithmetic problems, and finally asked to think aloud their thinking process. The study reveals that the thinking process of both the male and female subjects is in the form of accommodation as they ap­proached the arithmetic problems by repeatedly reading the tasks. Though employing the same thinking process, in the planning stage, the male subject made use of rounding and compatible number strategies, whereas the female one used only rounding strategy. In implementing the plan, the male subject em­ployed mental counting through assimilation, but the female one used algorithm through accommoda­tion. In the evaluating stage, the male subject traced back his work through mental counting, while the female one utilized reverse operations. Abstrak: Proses Berpikir Siswa SD dalam Melakukan Estimasi Masalah Berhitung Berdasarkan Jenis Kelamin. Penelitian ini ingin mendeskripsikan proses berpikir siswa laki-laki dan perempuan yang berkemampuan matematika tinggi dalam melakukan estimasi. Penelitian dilakukan di kelas V SD, dengan subjek satu siswa laki-laki dan satu siswa perempuan yang memiliki skor 75 ke atas dalam tes kemampuan matematika. Data dikumpulkan dengan wawancara, pemberian tes dan think aloud. Analisis dilakukan dengan menelaah seluruh data, reduksi data, pengolompokan data, kategorisasi, pengkodean, dan pemeriksaan kredibilitas data dengan triangulasi waktu. Hasil penelitian menunjukkan bahwa proses berpikir keduanya adalah akomodasi. Dalam membuat rencana, laki-laki menggunakan rounding dan compatible number strategy, sedangkan

  9. KNOWLEDGE CONVERSION PADA PROSES PERENCANAAN PROYEK DI PT. LEN RAILWAY SYSTEM UNTUK STANDARDISASI PROSES DENGAN METODE SECI

    Directory of Open Access Journals (Sweden)

    Atikah Sayyidatu Nisaa

    2013-04-01

    Full Text Available PT LEN Railway System bergerak pada pembangunan proyek pensinyalan kereta api, namun pada proses perencanaan proyek pada perusahaan tersebut masih berupa tacit knowledge (pengalaman pekerja yang akan hilang. Oleh karena itu, diperlukan adanya konversi knowledge pekerja yang masih berbentuk tacit knowledge menjadi knowledge yang terdokumentasikan ke dalam bentuk explicit knowledge. Penelitian ini menggunakan metode SECI (Socialization, Externalization, Combination, Internalization. Pada tahap socialization dilakukan eksplorasi data kepada pelaku proyek yang bersangkutan mengenai proses bisnis suatu aktivitas maupun tacit dan explicit knowledge dari masing-masing aktivitas. Pada tahap externalization dilakukan pendokumentasian dari hasil eksplorasi data. Pada tahap combination dilakukan pemilihan best practice dengan menggunakan beberapa tools yaitu: metode Delphi, metode AHP dan pemilihan best practice menggunakan metode factor rating. Best practice yang didapatkan akan dikombinasikan dengan proses aktivitas dari PMBOK. Pada tahap internalization dilakukan penginformasian kepada pekerja mengenai best practice yang telah didapatkan dari hasil penelitian. Best practice yang terpilih dari hasil perhitungan factor rating didapatkan sebagai berikut best practice pembuatan WBS adalah proses bisnis dari responden 2 dengan nilai sebesar 8,710, untuk penentuan jadwal proyek dari responden 2 dengan nilai sebesar 8,067, untuk penentuan biaya proyek dari responden 3 sebesar 9,554, untuk pemilihan supplier dari responden 1 sebesar 8,330, untuk pembuatan desain proyek dari responden 1 sebesar 8,368 dan untuk pengadaan barang dari responden 1 dengan nilai sebesar 8,195. Kata Kunci : knowledge conversion, knowledge management, metode SECI Abstract The economic foundation movement of industrial era into the knowledge era has involved the project PT LEN Railway System which operates in the construction of the railway signaling project. This research uses SECI

  10. The Prose of Action

    DEFF Research Database (Denmark)

    Christiansen, Ulrik; Thrane, Sof

    2014-01-01

    risks changes over time in response to a lack of action on reported risks. In these processes Frontline Managers take on new responsibilities to make General Managers take action on reported risk. The reporting practice changes from the mere identification of risk to risk assessment and, finally......, to incorporating the possible response into the risk report. These findings add to extant literature by illustrating that actions do not automatically flow from the identification of risk. Rather, risk and action are dynamically interrelated in the sense that the prose in the risk report is a variable input...... to generate action and that a lack of action encourages managers to change their approach to reporting....

  11. Peta Buatan untuk Peningkatan Efektivitas Proses Belajar Sistem Koordinat Cartesius

    Directory of Open Access Journals (Sweden)

    NFN Rahmiah

    2012-01-01

    Full Text Available Pendidikan merupakan suatu rekayasa untuk mengendalikan learning guna mencapai tujuan yang direncanakan secara efektif dan efisien, dalam proses rekayasa ini peranan teaching sangat penting karena merupakan kegiatan yang dilakukan oleh guru untuk mentransfer pengetahuan, keterampilan dan nilai kepada siswa sehingga apa yang ditransfer memiliki makna bagi siswa sendiri dan berguna bagi dirinya sendiri dan masyarakat. Upaya untuk menghadapi tantangan tersebut adalah seorang guru perlu kreatif dan inovatif menciptakan metode mengajar yang dapat meningkatkan efektivitas proses pembelajaran. Oleh karena itu, kajian ini yang merupakan laporan hasil penelitian tindakan kelas pada salah satu SD Negeri di Kabupaten Maros Provinsi Sulawesi Selatan. Berdasarkan hasil yang diperoleh, pada umumnya terjadi peningkatan efektivitas proses berupa sikap belajar peserta didik yang diukur dengan menggunakan angket pengamatan dari siklus I dengan mean sebesar 1,80 ke siklus II sebesar 2,20. Sementara itu, hasil penilaian kognitif yang diukur dengan soal pencapaian kompetensi dasar juga mengalami peningkatan mean dari 70,55 pada siklus I menjadi 74,00 pada siklus ke II. Metode ini sangat dimungkinkan dapat dikembangkan melalui pendidikan matematika, karena matematika memiliki struktur dengan keterkaitan yang kuat dan jelas satu dengan yang lainnya, serta berpola pikir deduktif dan konsisten serta matematika merupakan alat yang dapat memperjelas dan menyederhanakan suatu keadaan atau situasi melalui abstraksi, idealisasi, atau generalisasi untuk suatu studi pemecahan masalah

  12. PENINGKATAN HASIL BELAJAR SISWA MELALUI PENDEKATAN KETERAMPILAN PROSES SAINS BERORIENTASI PROBLEM-BASED INSTRUCTION

    Directory of Open Access Journals (Sweden)

    Sri Wardani

    2011-12-01

    Full Text Available Telah dilakukan penelitian tindakan kelas untuk memperbaiki dan meningkatkan hasil belajarsiswa melalui penelitian tindakan kelas dengan pendekatan Keterampilan Proses Sains (KPS BerorientasiProblem Based Instruction (PBI. Penelitian ini dilaksanakan di kelas XII IPA 8 SMA N 2 Semarang tahunpelajaran 2008/2009, dengan jumlah siswa 40 orang. Penelitian ini bertujuan untuk mengetahui apakahpembelajaran dengan menggunakan Pendekatan KPS Berorientasi PBI dapat meningkatkan hasilbelajar dan aktivitas belajar siswa. Fokus dalam penelitian ini adalah hasil belajar kimia yang meliputiaspek kognitif, afektif, psikomotorik, selain juga aktivitas belajar dan keterampilan proses sains siswa,serta kinerja guru. Hasil penelitian menunjukkan terjadinya peningkatan hasil belajar siswa berturut-turutadalah 70,33 , 80,63 dan 89,88. Aktivitas belajar siswa juga mengalami peningkatan yaitu dengan skorrata-rata 65,21 pada siklus I naik menjadi 75,88 pada siklus II serta meningkat pada siklus III menjadi85,05. Dapat disimpulkan bahwa pembelajaran kimia melalui pendekatan KPS berorientasi PBI dapatmeningkatkan hasil belajar serta aktivitas belajar siswa. Kata Kunci: keterampilan proses sains, problem based instruction

  13. A Comparative Analysis of Golestan and rhymed Prose on the basis of Arabic Rhetoric

    Directory of Open Access Journals (Sweden)

    Taher Lavzheh

    2015-04-01

    Full Text Available Abstract Harmonious and rhymed prose is a literary kind of speech characterized by producing music and intonation in order to conveying meaning of the context as well as possible and influencing the addressee more. In this paper main question is “whether Sa’di in writing the Golestan, besides of applying rules of this kind of speech in Persian language, has used those characteristics of rhymed prose that exist in the main Arabic rhetoric books?” For this purpose, Characteristics of rhythmic and rhymed prose in Arabic rhetoric books have been examined by using description-annalistic approach, and brief pointing to the situation of Persian rhetoric science. The hypothesis is based on the belief that Golistan’s author uses ideas of Arab rhetorician in composition of this book to strengthen the structure of Harmonious and rhymed prose. The aim of the present study is recognizing that Sa'di in the rhymed prose of Golistan how much has used important Arabic rhetorical resources in the field of word and meaning. Having a critical look at the rhetorical books, New and Old Persian sources, it can be found that the researchers noted only a short definition limited to interpretation of some words or expressions based on great prose works and poetries, and not expressed their opinion by a critical attitude and also not looked on the details exactly and thoroughly of the aesthetic view. In the other side, in Arabic literature up to the Sa’di’s range, the field of rhetoric has been expanded and developed more and more. Most parts of Golistan are consistent with theories in view of Arab rhetoricians that in the following of this paper some cases are briefly mentioned: In the period of Abuhelal Askari, main idea was that meaning is superior to the word, and meaning was not as important as word. Abd ol-Qahr Jorjani abolished that belief and so emphasized that word and meaning cannot be separated and also proved that word out of the meaning frame and

  14. Gerabah Situs Wayputih sebagai Komoditi Barter di Kerajaan Hoamoal

    Directory of Open Access Journals (Sweden)

    Wuri Handoko

    2016-04-01

    Full Text Available The site of Wayputih settlement in the history and traditions of the various sources mentioned as the part of the Kingdom Hoamoal region. This study aims to clarify the role of settlement Wayputih sites as the region as one of the central region of the kingdom Hoamoal clove producer. In addition it describes the process of trade and exchange between commodities produced by commodity from outside the area. This study uses a survey to see traces of settlements based on primary data pottery artifacts, then perform quantitative and qualitative analysis of data to explain the use and development of the system of commodity exchanges in the region. The results of the study, found the distribution of pottery with a high quantity in the site area. It can be concluded that based on the intensity of pottery and not produced in the local area, then to obtain it from outside the region to barter with cloves produced in the local area. Trade and exchange of pottery with cloves in Wayputih, support the development of trade in the territory of the Kingdom Hoamoal. Situs pemukiman Wayputih dalam berbagai sumber sejarah maupun tradisi tutur merupakan wilayah pemerintahan dari Kerajaan Hoamoal. Penelitian ini bertujuan untuk menjelaskan peranan permukiman situs Wayputih sebagai wilayah sebagai salah satu wilayah pusat penghasil cengkeh bagi kerajaan Hoamoal. Selain itu menggambarkan proses perdagangan dan pertukaran antara komoditi yang dihasilkan dengan komoditi dari luar wilayah. Penelitian ini menggunakan metode survei untuk melihat jejak-jejak permukiman berdasarkan data utama artefak gerabah, selanjutnya melakukan analisis secara kuantitatif dan kualitatif data untuk menjelaskan penggunaan dan perkembangan sistem pertukaran komoditi di wilayah tersebut. Hasil penelitian, ditemukan sebaran gerabah dengan kuantitas yang tinggi di wilayah situs tersebut. Dapat disimpulkan bahwa berdasarkan intensitas gerabah dan tidak dihasilkan di wilayah setempat, maka untuk

  15. UNDERSTANDING PROSE THROUGH TASK ORIENTED AUDIO-VISUAL ACTIVITY: AN AMERICAN MODERN PROSE COURSE AT THE FACULTY OF LETTERS, PETRA CHRISTIAN UNIVERSITY

    Directory of Open Access Journals (Sweden)

    Sarah Prasasti

    2001-01-01

    Full Text Available The method presented here provides the basis for a course in American prose for EFL students. Understanding and appreciation of American prose is a difficult task for the students because they come into contact with works that are full of cultural baggage and far apart from their own world. The audio visual aid is one of the alternatives to sensitize the students to the topic and the cultural background. Instead of proving the ready-made audio visual aids, teachers can involve students to actively engage in a more task oriented audiovisual project. Here, the teachers encourage their students to create their own audio visual aids using colors, pictures, sound and gestures as a point of initiation for further discussion. The students can use color that has become a strong element of fiction to help them calling up a forceful visual representation. Pictures can also stimulate the students to build their mental image. Sound and silence, which are a part of the fabric of literature, may also help them to increase the emotional impact.

  16. Kajian Dampak Proses Pengolahan Air di IPA Siwalanpanji Terhadap Lingkungan dengan Menggunakan Metode Life Cycle Assessment (LCA

    Directory of Open Access Journals (Sweden)

    Fara Pratiwi Eka Riyanty

    2015-12-01

    Full Text Available Proses pengolahan air minum secara konvensional dapat menyebabkan dampak lingkungan akibat konsumsi energi dan pemakaian bahan kimia. Penelitian ini mengidentifikasi dampak pencemaran yang dihasilkan dari proses pengolahan air di IPA Siwalanpanji menggunakan life cycle assessment. Life Cycle Assessment (LCA merupakan metode untuk menganalisis dampak suatu produk terhadap lingkungan sepanjang siklus hidupnya. Siklus hidup dari suatu produk terdiri dari ekstraksi bahan baku, proses produksi hingga proses pembuangan akhir. Dari hasil analisis LCA, menggunakan software Simapro 7.33 dampak pencemaran yang terjadi berupa pencemaran udara yang disebabkan oleh penggunaan klorin, polyaluminium chloride (PAC dan konsumsi listrik. Dampak pencemaran terbesar terjadi pada penggunaan listrik dalam pemakaian satu hari yaitu menyebabkan respiratory inorganics sebesar 0,748 kg PM2.5, ozone layer depletion sebesar 0,000295 kg CFC-11 dan global warming sebesar 1000 kg CO2. Solusi untuk mengurangi dampak lingkungan yang dapat dilakukan instalasi pengolahan air adalah dengan cara peningkatan efesiensi peralatan.

  17. Analisa Kesenjangan dan Dampak Perubahan Proses Bisnis Financial Accounting Berdasarkan Best Practice SAP (Studi Kasus: PT Perkebunan Nusantara XI

    Directory of Open Access Journals (Sweden)

    Rizki Fadhil Syahria

    2017-01-01

    Full Text Available Salah satu strategi perusahaan yang sangat penting dalam perusahaan adalah dengan melakukan perencanaa sumber daya perusahaan atau dikenal dengan istilah Enterprise Resource Planning (ERP. Perencanaan sumber daya saat ini sangat bergantung dengan teknologi informasi untuk mempercepat proses dan melakukan integrasi data. PT. Perkebunan Nusantara XI (PTPN XI. PTPN sebelas melalui direksi, hendak melakukan penerapan ERP berbasis SAP di perusahaannya. Sebelum melangkah lebih jauh ke implementasi, sebuah organisasi harus melalui serangkaian tahapan yang dimulai dari project preparation, business blueprint, realization, final preparation, dan go live and support (implementasi untuk menerapakan ERP. Pada tugas akhir ini, proses berkedudukan pada tahapan poject preparation tepatnya pada business process requirement and design. Dalam tugas akhir ini, aktifitas business process requirement and design yang didefinikasi sebagai aktifitas pemodelan proses bisnis as-is dan tobe. Dari hasil pemodelan tersebut dilakukan analisa kesenjangan antara proses as is dan to be. Tugas akhir ini berfokus pada aktifitas proses bisnis di dalam kegiatan keuangan atau finance. Hasil dari aktifitas tugas akhir ini akan dijadikan sebagai bahan untuk mengambil keputusan dalam membuat business blueprint serta sebagai acuan untuk tahapan setelahnya

  18. A Comparative Analysis of Golestan and rhymed Prose on the basis of Arabic Rhetoric

    Directory of Open Access Journals (Sweden)

    Taher Lavzheh

    2015-03-01

    Full Text Available Abstract Harmonious and rhymed prose is a literary kind of speech characterized by producing music and intonation in order to conveying meaning of the context as well as possible and influencing the addressee more. In this paper main question is “whether Sa’di in writing the Golestan, besides of applying rules of this kind of speech in Persian language, has used those characteristics of rhymed prose that exist in the main Arabic rhetoric books?” For this purpose, Characteristics of rhythmic and rhymed prose in Arabic rhetoric books have been examined by using description-annalistic approach, and brief pointing to the situation of Persian rhetoric science. The hypothesis is based on the belief that Golistan’s author uses ideas of Arab rhetorician in composition of this book to strengthen the structure of Harmonious and rhymed prose. The aim of the present study is recognizing that Sa'di in the rhymed prose of Golistan how much has used important Arabic rhetorical resources in the field of word and meaning. Having a critical look at the rhetorical books, New and Old Persian sources, it can be found that the researchers noted only a short definition limited to interpretation of some words or expressions based on great prose works and poetries, and not expressed their opinion by a critical attitude and also not looked on the details exactly and thoroughly of the aesthetic view. In the other side, in Arabic literature up to the Sa’di’s range, the field of rhetoric has been expanded and developed more and more. Most parts of Golistan are consistent with theories in view of Arab rhetoricians that in the following of this paper some cases are briefly mentioned: In the period of Abuhelal Askari, main idea was that meaning is superior to the word, and meaning was not as important as word. Abd ol-Qahr Jorjani abolished that belief and so emphasized that word and meaning cannot be separated and also proved that word out of the

  19. Praktik Trademark Squatting dalam Proses Pendaftaran Merek di Indonesia

    Directory of Open Access Journals (Sweden)

    Widya Justitia

    2016-04-01

    Full Text Available Penelitian ini bertujuan untuk mengetahui dan menganalisis mengapa praktik trademark squatting dapat terjadi dalam proses pendaftaran merek beserta cara mengatasinya. Selanjutnya, penelitian ini juga membahas mengenai konsepsi ideal terkait proses pendaftaran merek di Indonesia guna menghindari dan meminimalisasi praktik trademark squatting. Penelitian ini merupakan penelitian kualitatif yang bersifat yuridis empiris dan data yang terkumpul dianalisa dengan metode deskriptif kualitatif. Hasil penelitian menunjukkan bahwa praktik trademark squatting merupakan suatu tindakan mendaftarkan merek milik orang lain yang belum terdaftar, sehingga membuat pemilik merek yang sebenarnya tidak dapat lagi mendaftarkan mereknya. Setelah itu, pelaku menjual sertifikat hak atas merek tersebut kepada pemilik aslinya dengan harga melebihi biaya permohonan pendaftaran merek pada umumnya. Kendala yang ditemui dalam proses pendaftaran merek di Indonesia adalah kurangnya sumber daya manusia dalam menangani jumlah permohonan pendaftaran merek yang mencapai ribuan setiap harinya. Hal ini berdampak pada tidak optimalnya proses pendaftaran merek di Indonesia yaitu dengan menggagas suatu sistem yang bernama first to file based on use guna mengoptimalisasikan perlindungan pemilik merek, pertimbangan untuk meratifikasi Madrid System juga merupakan salah satu opsi lain untuk mencegah praktik trademark squatting. Abstract The purpose of this research is to identify and analyze why the practice of trademark squatting could occur in Indonesia's trademark registration process along with the constraints found in the trademark registration process in Indonesia and how to overcome them. Furthermore, it will also discuss the ideal conception related to trademark registration process to avoid and minimize the practice of trademark squatting. This research is an empirical legal research and all data were analyzed with qualitative methods. The results showed that trademark squatting is

  20. Improvement of chronic corneal opacity in ocular surface disease with prosthetic replacement of the ocular surface ecosystem (PROSE) treatment.

    Science.gov (United States)

    Cressey, Anna; Jacobs, Deborah S; Remington, Crystal; Carrasquillo, Karen G

    2018-06-01

    To demonstrate clearing of chronic corneal opacities and improvement of visual acuity with the use of BostonSight prosthetic replacement of the ocular surface ecosystem (PROSE) treatment in ocular surface disease. We undertook retrospective analysis of the medical records of a series of patients who underwent PROSE treatment from August 2006 to December 2014. Patients were referred for ocular surface disease of various etiologies. Primary inclusion criterion was corneal opacity that improved with PROSE treatment. Patients were excluded if topical steroids or adjuvant therapy used once PROSE treatment was initiated. Underlying disease, prior treatment, clinical presentation, and clinical course were extracted from the medical record. Four patients are included in this series. There were three females and one male; median age at time of treatment initiation was 30 years (range = 0.5-58 years). Median duration of PROSE treatment at time of retrospective analysis was 3.5 years (range = 1-8 years). Two cases had corneal opacification in the context of neurotrophic keratopathy: a unilateral case due to presumed herpes simplex keratitis and a bilateral case due to congenital corneal anesthesia associated with familial dysautonomia. One case had corneal opacity from exposure related to seventh nerve palsy, and one had corneal opacification associated with recurrent surface breakdown, neurotrophic keratopathy, and limbal stem deficiency of uncertain etiology. After consistent wear of prosthetic devices used in PROSE treatment for support of the ocular surface, visual acuity improved and clearing of the opacities was observed, without use of topical steroids or adjuvant therapy. These cases demonstrate clearing of chronic corneal opacity with PROSE treatment for ocular surface disease. This clearing can occur with no adjuvant therapy, suggesting that restoration of ocular surface function and integrity allows for corneal remodeling.

  1. Prose Checklist: Strategies for Improving School-to-Home Written Communication

    Science.gov (United States)

    Nagro, Sarah A.

    2015-01-01

    Effective communication enhances school-family partnerships. Written communication is a common, efficient way of communicating with families, but potential barriers to effective communication include readability level, clarity of presentation, complexity of format, and structural components. The PROSE Checklist presented in this article can…

  2. Perancangan Fasilitas Kerja yang Ergonomis pada Proses Pelarutan Printed Circuit Board (PCB dengan Menggunakan Metode Quality Function Deployment (Studi kasus di IK-Tech

    Directory of Open Access Journals (Sweden)

    Adhi Susatyo

    2017-11-01

    Full Text Available IK-Tech merupakan home industry  yang bergerak dalam pembuatan PCB. Proses produksi di IK-Tech masih dengan proses manual, terutama pada proses pelarutan PCB (proses Etching. Proses Etching di IK-Tech tumpah, proses yang lama dan penggunaan yang tidak ergonomis karena operator bekerja dengan menggunakan alat yang seadanya berupa nampan, sehingga dalam proses pelarutan, terdapat banyak kekurangan seperti pelarut mudah posisi jongkok membungkuk. Gerakan kerja yang berulang-ulang dengan frekuensi yang sering, mengakibatkan operator tidak nyaman dalam bekerja dan mudah lelah. Oleh karena itu, perlu dilakukan perbaikan dalam proses Etching yaitu merancang fasilitas kerja.       Pada penelitian ini, dirancang fasilitas kerja dengan pendekatan Quality Function Deployment. Metode ini bertujuan mengakomodasi perancangan fasilitas kerja berdasakan kebutuhan pengguna. Selain itu, pendekatan ergonomis pada perancangan fasilitas kerja untuk memperkecil beban kerja operator sehingga menciptakan rasa nyaman dan aman bagi operator dalam bekerja.        Berdasarkan hasil analisis dan pengolahan data, enumeration persentase keluhan operator sebelum perancangan sebesar 7% keluhan sakit, setelah perancangan turun menjadi 0% (tidak ada keluhan sakit. Rekapitulasi waktu pelarutan sebelum perancangan sebesar 22,66 menit/unit, waktu pelarutan setelah perancangan (penggunaan manual sebesar 13,66 menit/unit dan waktu pelarutan setelah perancangan (penggunaan otomatis sebesar 11,37 menit/unit. Dari rekap waktu pelarutan, diketahui penurunan waktu pelarutan sebelum dan setelah perancangan (penggunaan manual sebesar 39,72 %, penurunan waktu pelarutan sebelum dan setelah perancangan (penggunaan otomatis sebesar 49,82 %.

  3. PEMBUATAN APLIKASI SISTEM PENDUKUNG KEPUTUSAN UNTUK PROSES KENAIKAN JABATAN DAN PERENCANAAN KARIR PADA PT. X

    Directory of Open Access Journals (Sweden)

    Andreas Handojo

    2003-01-01

    Full Text Available Fulfilling empty position on company often become complicated process because the candidate who can be placed in that position by matching between employee-profile and position-profile sometimes not well define. To minimize that problem, there should be a method such as decision support system which can analize employees who suitable with the available position. This decision support system for profile matching process and gap analization is made based on company's data and rules which locate on PT.X. Profile Matching process is taken to recommend employees in Positioning and Carrier Planning based on three stages, which are Intelectual Capacity, Working Area and Attitude. The result of this process is represented ini rank of employees as recommendation for decision maker in deciding which employee is suitable for the position.This Software is using Microsoft Access 2000 for database and Borland Delphi 5.0 as compiller. Form the result of this implementation system can be seen that this software can be very helpfull on decision support to profile matching in positioning and career planning on PT. X. Abstract in Bahasa Indonesia : Pengisian jabatan yang kosong pada proses kenaikan jabatan sering mengalami kesulitan karena pengajuan calon kandidat yang bisa menempati jabatan tersebut dengan cara pencocokan profil karyawan dan profil jabatan kurang terdefinisi dengan baik. Untuk meminimumkan kendala tersebut diperlukan suatu sistem pendukung keputusan yang dapat menganalisa beberapa karyawan yang sesuai dengan profil jabatan yang ada. Sistem pendukung keputusan untuk proses profile matching dan analisis gap ini dibuat berdasarkan data dan norma-norma SDM yang terdapat di PT. X. Proses Profile Matching dilakukan untuk menentukan rekomendasi karyawan dalam Sistem Kenaikan Jabatan dan Perencanaan Karir berdasar pada 3 aspek yaitu Kapasitas Intelektual, Sikap Kerja dan Perilaku. Hasil dari proses ini berupa ranking karyawan sebagai rekomendasi bagi

  4. EFFECTS OF TWO METHODS OF INSTRUCTION ON STUDENTS’ CRITICAL RESPONSE TO PROSE LITERATURE TEXT IN ENGLISH IN SOME SECONDARY SCHOOLS IN BENIN CITY

    Directory of Open Access Journals (Sweden)

    F. O. EZEOKOLI

    2016-08-01

    Full Text Available This study investigated the effects of two methods of instruction on secondary school students’ critical response to Prose Literature text. The study adopted a pretest, posttest, control group quasi experimental design. The participants in the study were 84 Senior Secondary II students of Literature-in-English purposively selected from four Schools in Ikpoba-Okha Local Government Area of Edo State. Two intact classes were randomly assigned to each of the treatment and control groups. Three hypotheses were tested at 0.05 alpha level. The instruments used were: Critical Response to Prose Literature Test (r = .75, Questionnaire on Home Background of Students (r = .82, and Critical Response to Prose Literature Test Marking Guide. Data obtained were subjected to Analysis of Covariance and graph. The results showed significant main effect of treatment on students’ critical response to Prose Literature (F (1, 77 = 44.731; p < .05. Students exposed to Engagement Strategies Method performed better than those exposed to the Conventional Method of instruction. Further, home background of students had no significant effect on students’ critical response to Prose Literature text (F (2, 77 = 4.902; p < .05. There was significant interaction effect of treatment and home background of students on students’ critical response to Prose Literature text (F (2, 77 = 3.508; p < .05. It was concluded that Engagement Strategies Method is effective in promoting students’ critical response to Prose Literature text. Teachers of Literature-in-English should employ Engagement Strategies Method in teaching Prose Literature to students in Senior Secondary Schools.

  5. OPTIMASI LAJU ALIR MASSA DALAM PURIFIKASI PENDINGIN RGTT200K UNTUK PROSES KONVERSI KARBONMONOKSIDA

    Directory of Open Access Journals (Sweden)

    Sumijanto Sumijanto

    2016-03-01

    Full Text Available ABSTRAK OPTIMASI LAJU ALIR MASSA DALAM PURIFIKASI PENDINGIN RGTT200K UNTUK PROSES KONVERSI KARBONMONOKSIDA. Karbonmonoksida adalah spesi yang sulit dipisahkan dari helium pendingin reaktor karena mempunyai ukuran molekul relatif kecil sehingga diperlukan proses konversi menjadi karbondioksida. Laju konversi karbonmonoksida dalam sistem purifikasi dipengaruhi oleh beberapa parameter diantaranya konsentrasi, temperatur dan laju alir massa. Dalam penelitian ini dilakukan optimasi laju alir massa dalam purifikasi pendingin RGTT200K untuk proses konversi karbonmonoksida. Optimasi dilakukan melalui simulasi proses konversi karbonmonoksida menggunakan perangkat lunak Super Pro Designer. Laju pengurangan spesi reaktan, laju pertumbuhan spesi antara dan spesi produk dalam kesetimbangan reaksi konversi dianalisis untuk memperoleh optimasi laju alir massa purifikasi terhadap proses konversi karbonmonoksida. Tujuan penelitian ini adalah menyediakan data laju alir massa purifikasi untuk pembuatan dasar desain sistem purifikasi helium pendingin RGTT200K. Hasil analisis menunjukkan bahwa pada laju alir massa 0,6 kg/detik proses konversi belum optimal, pada laju alir massa 1,2 kg/detik mencapai optimal dan pada laju alir 3,6 kg/detik s/d 12,0 kg/detik tidak efektif. Untuk memdukung dasar desain sistem purifikasi helium pendingin RGTT200K maka laju alir massa purifikasi untuk proses konversi karbonmonoksida digunakan laju alir massa 1,2 kg/detik. Kata kunci: Karbonmonoksida, konversi, purifikasi, laju alir massa, RGTT200K.   ABSTRACT OPTIMIZATION OF MASS FLOW RATE IN RGTT200K COOLANT PURIFICATION FOR CARBONMONOXIDE CONVERSION PROCESS. Carbonmonoxide is a species that is difficult to be separated from the reactor coolant helium because it has a relatively small molecular size.  So it needs a process of conversion from carbonmonoxide to carbondioxide. The rate of conversion of carbonmonoxide in the purification system is influenced by several parameters

  6. ANALISIS PERUBAHAN KURIKULUM PADA PROSES PEMBELAJARAN PENDIDIKAN JASMANI OLAHRAGA DAN KESEHATAN DI SEKOLAH DASAR

    Directory of Open Access Journals (Sweden)

    Slamet Yulianto

    2017-01-01

    Tujuan penelitian ini adalah untuk mengetahui perubahan proses pembelajaran PJOK yang dilakukan guru seiring dengan tuntutan perubahan kurikulum sebagai kompetensi keprofesionalan guru. Penelitian ini menggunakan pendekatan penelitian kualitatif dengan jenis fenomenologi untuk menggali data alamiah dari subjek guru PJOK. Pengumpulan data dilakukan oleh peneliti sebagai instrumen kunci dengan teknik wawancara, observasi, dan analisis dokumen kepada subjek guru PJOK di SD inti kota Malang. Hasil penelitian menunjukkan bahwa, guru PJOK telah memenuhi standar profesi guru, guru PJOK telah memahami konsep perubahan kurikulum dan konsep PJOK, namun proses pembelajaran PJOK tidak maksimal sesuai dengan tuntutan perubahan kurikulum sebagai kompetensi keprofesionalan guru.

  7. PENGARUH MODEL PROBLEM BASED LEARNING TERHADAP KEMAMPUAN BERPIKIR ANALITIS DAN KETERAMPILAN PROSES SAINS KIMIA PESERTA DIDIK

    Directory of Open Access Journals (Sweden)

    Eli Rohaeti

    2017-10-01

    Full Text Available This research aimed to investigate the effect of PBL model on students’ analytical thinking abilities and science process skills at rate reaction. This research was quasi experimental research using posttest-only control design. The sample was consisted 2 classess, experiment class used Problem Based Learning model and control class used Direct Instruction model with a total sample of 61 students. Instruments of this research were the observation sheet for measuring science process skills and the integrated assessment instrument which involved two indicators, analytical thinking abilities and science process skills. The result of this study shows that PBL model can increase students’ analytical thinking abilities and science process skills. The mean of posttest analytical thinking abilities and science process skills in experiment class is better than control class. The result of the statistic tests using ancova analysis shows that significance 0.000 < 0.05 at 5% significance level, so there’s effect of the using of PBL model on students’ analytical thinking abilities and science process skills. Abstrak Penelitian ini bertujuan untuk menguji pengaruh model PBL terhadap kemampuan berpikir analitis dan keterampilan proses sains kimia peserta didik pada materi laju reaksi menggunakan instrumen penilaian terintegrasi. Jenis penelitian ini adalah penelitian eksperimen semu. Desain penelitian yang digunakan, yaitu posttest control group design. Sampel dalam penelitian ini sebanyak 61 peserta didik yang dibagi dalam dua kelas, yaitu kelas eksperimen dan kelas kontrol. Kelas eksperimen menggunakan model Problem Based Learning, sedangkan kelas kontrol menggunakan model Direct Instruction. Instrumen yang digunakan dalam penelitian, yaitu lembar observasi untuk mengukur keterampilan proses sains kimia dan instrumen penilaian terintegrasi yang mencakup indikator kemampuan berpikir analitis dan keterampilan proses sains kimia peserta didik. Hasil

  8. Profil Proses Berpikir Mahasiswa Tipe Kepribadian Sensing dalam Pemecahan Masalah Logika Matematika

    Directory of Open Access Journals (Sweden)

    M.J. Dewiyani Sunarto

    2017-06-01

    Full Text Available ABSTRAK. Penelitian ini bertujuan untuk mengetahui profil proses berpikir mahasiswa dengan tipe kepribadian Sensing, yang terdiri atas Artisan dan Guardian, dalam menyelesaikan masalah matematika.  Pengenalan terhadap profil berpikir mahasiswa penting diketahui oleh pengajar, karena melalui pengenalan tersebut, pengajar dapat mengembangkan model pembelajaran yang sesuai pada masing-masing tipe kepribadian sehingga proses pembelajaran dapat dicapai secara optimal. Mengenai tipe kepribadian, David Keirsey membagi menjadi tipe Sensing dan Intuisi. Pada penelitian ini, akan dibicarakan tipe Sensing, yang terbagi menjadi tipe Artisan dan Guardian. Subjek penelitian adalah mahasiswa jurusan Sistem Informasi sebuah perguruan tinggi di Surabaya. Metode yang digunakan  adalah metode kualitatif eksploratif dimana subjek diminta untuk memecahkan masalah matematika menggunakan langkah heuristik dari Polya. Hasil penelitian menunjukkan bahwa profil proses berpikir mahasiswa dengan tipe Guardian lebih detail dan spesifik dalam memecahkan masalah matematika daripada tipe Artisan, yang lebih mengutamakan persoalan yang harus diselesaikan. Kata Kunci:  Pemecahan Masalah Matematika, Tipe Kepribadian, Sensing, Proses Berpikir. THINKING PROCESS PROFILE OF SENSING STUDENTS’ PERSONALITY TYPE IN SOLVING MATHEMATICAL PROBLEMS   ABSTRACT. The study was aimed  to understand the thinking process profile of Artisan and Guardian students in solving mathematical problem. The importance of thinking process profile,  an instructor can develop appropriate learning model for each personality type. So, the learning process can be optimized. The personality type is divided, by David Keirsey, into two types, Sensing and Intuition. In this research will be studied about Sensing type, which is divided into two, Artisan and Guardian. The subjects were students of Information Systems at a college in Surabaya. The used methods in this research is eksploratif qualitative method

  9. Pengembangan Aplikasi @Webplan untuk Perhitungan Waktu Standar pada Proses Perakitan Manual

    Directory of Open Access Journals (Sweden)

    Agus Sutanto

    2010-04-01

    Full Text Available Karya tulis ini berkenaan dengan pengembangan perangkat lunak berbasiskan Web untuk perhitungan waktu kerja standar yang merupakan sebuah modul tambahan pada aplikasi perangkat lunak untuk perancangan sistem kerja berbasiskan Web atau yang diberi nama @WebPlan® yang sudah dikembangkan oleh penulis. @WebPlan ini merupakan integrasi dari beberapa modul untuk perancangan tataletak dan disain stasiun kerja secara virtual 3D. Beberapa modul sudah dirancang sebelumnya yaitu modul untuk visualisasi produk dan strukturnya sehingga dimungkinkan visualisasi yang interaktif untuk proses perakitannya. Sedangkan modul utama dalam @WebPlan ini adalah 3D Facilities Layout dan disain/layout stasiun kerja. Untuk tujuan ini juga sudah dibuat beberapa alat bantu yaitu model manusia 3D untuk beberapa persentil dan beberapa analisa dan checklist ergonomi. Pengembangan aplikasi @WebPlan ini untuk perhitungan waktu standar pada produksi serial merupakan suatu yang sangat diperlukan untuk menentukan waktu total yang diperlukan dalam memproduksi/merakit sebuah produk. Waktu total ini merupakan data penting dalam membuat konfigurasi stasiun kerja untuk pembuatan produk. Metoda Pengukuran waktu perakitan yang dipakai dalam hal ini adalah MTM-UAS (Universal Analysing System yang sangat cocok untuk perakitan manual. Hasil perhitungan waktu proses perakitan ini divalidasi dengan proses perakitan yang sebenarnya dan tidak menunjukkan perbedaan harga yang cukup signifikan. Beberapa kemudahan yang didapat pada metoda ini adalah MTM-UAS menggabungkan beberapa gerakan dan tidak terlalu detail dibandingkan metoda pengukuran waktu lainnya. Akan tetapi memiliki hasil yang cukup mendekati hasil yang sebenarnya. Modul aplikasi perhitungan waktu standar ini merupakan bagian yang diintergrasikan nantinya dalam perancangan tataletak dan stasiun kerja secara virtual 3D

  10. Model Persamaan Faktor Koreksi pada Proses Sedimentasi dalam Keadaan Free Settling

    Directory of Open Access Journals (Sweden)

    Roessiana D L

    2015-08-01

    Full Text Available Sedimentasi adalah proses pengendapan padatan yang terkandung dalam cairan oleh gaya gravitasi. Pada umumnya proses sedimentasi dilakukan setelah proses koagulasi dan flokulasi, tujuannya adalah untuk memperbesar partikel padatan agar menjadi lebih berat dan dapat tenggelam dalam waktu lebih singkat. Ukuran dan bentuk partikel mempengaruhi rasio permukaan terhadap volume partikel sedangkan konsentrasi partikel mempengaruhi pemilihan tipe bak sedimentasi. Semua factor ini mempengaruhi kecepatan mengendap partikel pada sedimentasi, karena itu membutuhkan kecepatan turunnya partikel untuk mendesain bak sedimentasi yang efektif dan efisien.Tujuan dari penelitian ini adalah untuk memperkirakan bentuk bentuk persamaan empiric yang merupakan faktor koreksi sebagai fungsi konsentrasi slurry mula-mula serta diameter partikel. Persamaan faktor koreksi dibuat berdasarkan data hasil perhitungan dari persamaan Stokes-Newton, Farag, Fergusson-Church serta persamaan Gibbs-Mathew-Link ternadap data percobaan. Percobaan yang dilakukan adalah mula-mula gaplek dihancurkan kemudian dicampur air lalu dimasukkan ke dalam tabung kaca setinggi 100 cm. Tinggi lapisan padatan yang turun ke bawah dicatat tingginya tiap 3 menit, pencatatan dihentikan setelah beda tinggi lapisan padatan yang diukur tiap 3 menit sudah mulai menurun. Percobaan dilakukan dengan menvariasikan konsentrasi tepung tapioka dalam umpan dari 0,5% sampai 5%, serta diameter partikel antara 0,057 mm sampai 0,1245 mm.Dari hasil penelitian dapat ditarik kesimpulan bahwa persamaan F yang paling cocok adalah bila dikalikan dengan Farag Law dengan persamaan F = 480.941. X 1(0,0751 .X 2(1,7777. . Jadi persamaan kecepatan sedimentasi yang paling baik adalah : gd p 2  s   f  f 2 V = . F 18  f b  

  11. Prinsip termodinamika dalam proses pendinginan sperma sapi (semen) beku

    OpenAIRE

    Kholifah, Kholifah; Bahari Nurdin, Wira; Harimei, Bambang; Yusuf, Muhammad

    2016-01-01

    Telah dilakukan penelitian prinsip termodinamika dalam proses pendinginan sperma sapi (semen) beku. Sperma sapi (semen) sebagai sampel utama dan besi sebagai sampel pembanding. Nitrogen cair sebagai bahan pendingin untuk membekukan semen dalam tangki kriogenik. Motility Analysis Semen dilakukan untuk mengetahui gerakan massa atau kualitas semen. Hasil Motility Analysis Semen menggunakan mikroskop menunjukkan bahwa semen Messi memiliki kualitas yang baik dengan gerakan massa (+++) dan semen Ro...

  12. Analisis Keterampilan Proses Sains Peserta Didik Melalui Bahan Ajar Multimedia Interaktif Alat Ukur dan Pengukuran dengan Pendekatan Behavioristik

    Directory of Open Access Journals (Sweden)

    Ino Angga Putra

    2017-10-01

    Full Text Available Abstract The development of science and technology today is spreading rapidly in the field of education, especially in the development of learning media. The application of learning media using behavioristic approach that tends to optimize the stimulus and learners' response in process (science process skill. The purpose of this research is a to describe the application of interactive multimedia teaching materials to the students 'science process skills and b to know the impact of interactive multimedia materials on the students' learning process skill. The type of this research is Pre-Experimental Research by using one-shot case study design. Implementation of research product in field can develop skill of science process learners based on result of T test 2,229 significance of 0.056. It is expected that further research to determine the positive response of learners. Abstrak Perkembangan IPTEKS dewasa ini menyebar secara cepat dibidang pendidikan khususnya dalam pengembangan media pembelajaran. Penerapan media pembelajaran tersebut menggunakan pendekatan behavioristik yang cenderung mengoptimalkan stimulus dan respon peserta didik dalam proses (keterampilan proses sains. Tujuan penelitian ini yaitu a untuk mendeskripsikan penerapan bahan ajar multimedia interaktif terhadap keterampilan proses sains peserta didik dan b untuk mengetahui dampak bahan ajar multimedia interaktif terhadap keterampilan proses sains peserta didik. Jenis penelitian ini adalah Penelitian Pre-Eksperimen dengan menggunakan desain one shot case study. Implementasi produk penelitian dilapangan dapat mengembangkan keterampilan proses sains peserta didik berdasarkan hasil Uji T sebesar 2.229 signifikansi 0.056 . Diharapkan adanya penelitian lanjutan untuk mengetahui respon positif peserta didik.

  13. RANCANG BANGUN FILE TRANSFER PROTOCOL (FTP DENGAN PENGAMANAN OPEN SSL PADA JARINGAN VPN MIKROTIK DI SMK DWIWARNA

    Directory of Open Access Journals (Sweden)

    Devi Ruwaida

    2018-01-01

    Full Text Available File Transfer Protocol (FTP server merupakan jenis sistem yang menghubungkan hak pengakses (client dan penyedia (server dalam melakukan pertukaran data yang melewati port 21, yang semula ftp server berjalan pada protocol yang tidak terlindungi di dalam port 21, kemudian dengan OpenSSL ini di amankan agar data dapat sampai ke tujuan. Pada penelitian ini akan dibangun Rancang Bangun File Transfer Protocol (Ftp Dengan Pengamanan Open Ssl Pada Jaringan Vpn Mikrotik Di Smk Dwiwarna  yang akan di konfigurasi pada debian 9.1 dengan  di tambahnya pengaman sertifikat ssl , dengan harapan  melindungi proses dalam pengiriman data dapat dengan aman dan ditambahkannya sistem VPN PPTP pada mikrotik akan lebih memberikan keamanan yang lebih baik lagi, dimana pemanfaatan Point-to-Point Tunneling Protocol (PPTP suatu protokol jaringan yang bisa memungkinkan client dalam pengiriman data secara aman melalui remote client kepada server sekolah dibangunnya suatu virtual private network (VPN.

  14. Hubungan Negara-Masyarakat dalam Proses Pembentukan Daerah Otonom di Kabupaten Bolaang Mongondow Timur

    Directory of Open Access Journals (Sweden)

    Lukman Damopolii

    2014-12-01

    Full Text Available Tuntutan pembentukan daerah otonom di Indonesia dewasa ini semakin intensif dan masif. Seringkali diartikulasikan sebagai tuntutan politik tanpa melihat urgensi administratif sehingga cenderung mengesampingkan hakekat otonomi daerah dan tujuan desentralisasi. Otonomi daerah masih dipahami sebatas hak daerah memperoleh otonomi, tanpa memperhitungkan kapasitas daerah dalam berotonomi. Tujuan penelitian ini mendeskripsikan dan menganalisis latar belakang tuntutan pembentukan, proses pembentukan, dan partisipasi masyarakat dalam proses pembentukan daerah otonom di Kabupaten Bolaang Mongondow Timur. Penelitian menggunakan metode kualitatif dengan teknik analisa model Mills dan Huberman melalui langkah pengumpulan data, reduksi data, penyajian data, penarikan kesimpulan/verifikasi. Hasil penelitian menunjukkan; pertama, latar belakang tuntutan pembentukan sebagai upaya lokalisasi kekuasaan untuk menciptakan pusat kekuasaan baru di daerah dan faktor gerakan sosial yang dipicu konflik sosial berbasis etnik, gerakan reaksioner, pembandingan dengan pencapaian daerah lain, serta adanya peluang politik. Kedua, proses pembentukan terbagi dalam tiga tahap yakni sosialisasi dan konsolidasi elit, pemekaran desa dan kecamatan, serta pendekatan dan komunikasi politik di semua tingkatan. Pada aspek keterpenuhan syarat sebagaimana diatur UU 32/2004 dan PP 78/2007, daerah ini telah memenuhi syarat administratif dan fisik namun belum memenuhi syarat teknis. Ketiga, partisipasi masyarakat dilakukan dalam bentuk musyawarah, pengumpulan dana dan hibah tanah atau bangunan, serta pemasangan atribut pemekaran, sehingga secara keseluruhan telah ada pertanda partisipasi walaupun belum sampai pada derajat kendali warga. Kata kunci: Gerakan sosial, Lokalisasi kekuasaan, Partisipasi masyarakat, Pembentukan daerah otonom 

  15. Analisis ergonomi postur kerja operator pada proses pembuatan batako

    Directory of Open Access Journals (Sweden)

    Regina Anggraini

    2017-03-01

    Full Text Available Abstrak: Proses pembuatan batako merupakan salah satu pekerjaan yang membutuhkan penanganan material secara manual,sehingga tenaga fisik pekerja diperlukan meskipun mesin bantu cetak sudah tersedia. Berdasarkan pengamatan dilapangandiketahui bahwa seluruh aktivitas pembuatan batako banyak membutuhkan tenaga fisik. Pekerjaan membuat batako dapatdibagi menjadi beberapa elemen kerja dan setiap elemen kerja memberikan postur kerja yang bervariasi. Hasil analisis posturkerja dengan menggunakan REBA menunjukkan pekerja pada proses pemindahan batako basah memiliki nilai 11 dengan levelrisiko sangat tinggi. Perbaikan dilakukan dengan menambahkan kursi pekerja dan berhasil menurunkan skor REBA menjadi 5.Kata Kunci: Postur kerja, REBA Abstract: Brick-making process is one of those jobs that require manual materials handling, so that the physical exertion of workersneeded though a production machine is already available. Based on observations in the field note that the entire activity ofbrick-making requires a lot of physical exertion. Brick-making can be divided into several working elements and each element ofthe work provides a varied work posture. The results of the analysis work posture using REBA showed workers in the processof moving the wet concrete blocks have a value of 11 with a very high risk level. Improvement of working conditions by adding aseat for workers reduce the REBA score to 5 .Keywords: Work Posture , REBA

  16. IMPLEMENTASI METODE 5S PADA LEAN SIX SIGMA DALAM PROSES PEMBUATAN MUR BAUT VERSING (Studi Kasus di CV. Desra Teknik Padang

    Directory of Open Access Journals (Sweden)

    Adriansyah Adriansyah

    2007-01-01

    Full Text Available The objective of this research was to minimize processing time in manufacturing using 5S (Seiri, Seiton, Seiso, Seiketsu, Shitsuke method. As well as quality, processing time is one of the important points to consider. Improvement had been done in every step of the process to achieve 3.4 defect per million (DPM. Although 6s had not been achieved yet, but 5S method in Lean Sigma have already improved the production process Abstract in Bahasa Indonesia : Penelitian ini bertujuan untuk memperlihatkan penggunaan Metoda 5S (Seiri, Seiton, Seiso, Seiketsu, Shitsuke dalam meminimalkan waktu proses pembuatan produk. Selain kualitas produk, waktu proses merupakan hal yang penting untuk diperhatikan. Perbaikan dari setiap proses dilakukan agar didapat 3,4 kegagalan persejuta (DPM. Walaupun 6s belum tercapai, tapi penerapan metoda 5S dalam Lean Sigma sudah menunjukkan perbaikan pada proses yang dilakukan. Kata kunci: 5S, six sigma, lean sigma

  17. Self-Questioning and Prose Comprehension: A Sample Case of ESL Reading.

    Science.gov (United States)

    Miciano, Remedios Z.

    2002-01-01

    Report on an experiment to discover if self-questioning as a reading strategy would help Filipino ESL students improve comprehension of English prose texts. Concludes that self-questioning as a strategy does not significantly affect comprehension despite the number and types of questions asked. (Contains 4 tables and 25 references.) (WFA)

  18. Alterasi Akibat Proses Hidrothermal Di Bolaang Mongondow, Provinsi Sulawesi Utara

    OpenAIRE

    Harjanto, Agus; Sutanto, Sutanto; Sutarto, Sutarto; Subandrio, Achmad; Suasta, I Made; Hartono, Giri; Suputra, Putu; Basten, I Gde; Fauzi, Muhammad; Rosdiana, Rosdiana

    2016-01-01

    Bolaang Mongondow terletak di bagian tengah lengan utara Sulawesi yang disusun oleh busur magmatik berumur Neogen dan berpotensi mengandung mineral-mineral ekonomis. Hal tersebut yang melatarbelakangi dilakukan penelitian terhadap potensi sumber daya mineral. Tujuan penelitian adalah untuk mempelajari alterasi akibat proses hidrotermal serta hubungannya dengan cebakan emas (Au) berdasarkan kajian di lapangan maupun analisis laboratorium. Metode yang digunakan dalam penelitian, yaitu kajian li...

  19. MENINGKATKAN KAPASITAS LOADING MESIN PRESS 1000T PADA PROSES PRESS BRACKET SUPPORT AIR TANK DENGAN METODE PDCA DI PT. XYZ

    Directory of Open Access Journals (Sweden)

    Renty Anugerah Mahaji Puteri

    2016-01-01

    Full Text Available Agar proses produksi bisa berjalan dengan lancar, diperlukan improvement. Dalam pembahasan ini, improvement yang akan dilakukan terkait dengan proses pembentukan part bracket support air tank. Adapun metode yang digunakan pada penelitian ini adalah PDCA (Plan Do Check Action. Metode ini diangkat penulis sebagai metode yang paling cocok untuk diterapkan pada perusahaan yang bergerak di bidang otomotif seperti PT. XYZ ini. Yang menjadi titik fokus dari improvement yang akan dilakukan saat ini adalah dies untuk part bracket support air tank. Produk ini dianggap cocok untuk menjadi bahan improvement karena merupakan new project. Sehingga dapat melakukan improvement yang ekstrim sekalipun tanpa harus mengganggu produksi yang sedang berlangsung. Untuk itu penyesuaian atau rekayasa terhadap dies dari part tersebut akan dilaksanakan guna mencapai hasil atau target yang diinginkan.Adapun hasil yang diharapkan dari penelitian ini adalah tercukupinya kapasitas mesin untuk melakukan prosesproses yang harus dilakukan untuk pembuatan part bracket support air tank. Selain itu, kualitas dari produk yang dibuat juga menjadi item yang harus tetap dijaga. Karena kualitas dari produk yang dibuat akan menjaga kepercayaan customer terhadap PT. XYZ.

  20. PENGARUH IMPLEMENTASI THE 4-E LEARNING CYCLE TERHADAP PENGETAHUAN, KETERAMPILAN PROSES DASAR, DAN SIKAP ILMIAH IPA SISWA SDK KEREROBBO

    Directory of Open Access Journals (Sweden)

    Ferdinandus Bele Sole

    2013-01-01

    Full Text Available Penelitian ini bertujuan untuk mengetahui pengaruh model 4-E learning cycle terhadap: (1 pe-ngetahuan IPA siswa SD, (2 keterampilan proses dasar IPA siswa SD, dan (3 sikap ilmiah IPA siswa SD. Penelitian ini merupakan penelitian eksperimen semu. Populasi dalam penelitian ini adalah selu-ruh siswa kelas V SDK Kererobbo, Kecamatan Kota Tambolaka semester II tahun ajaran 2012/ 2013. Pengambilan sampel dilakukan dengan teknik sampling jenuh untuk dijadikan sebagai kelas eksperi-men dan kelas kontrol. Pada kelas eksperimen dilaksanakan pembelajaran IPA dengan menggunakan model 4-E Learning Cycle, sedangkan pada kelas kontrol menggunakan pembelajaran ekspositori. Instrumen yang digunakan adalah (1 tes terintegrasi untuk mengukur pengetahuan dan keterampilan proses dasar IPA dan (2 skala sikap untuk mengukur sikap ilmiah. Analisis data menggunakan (1 statistik deskriptif untuk mendeskripsikan data pengetahuan, keterampilan proses dasar dan sikap ilmi-ah; dan (2 statistik inferensial dengan menggunakan independent sampel t-test untuk menguji hipote-sis penelitian pada taraf signifikansi 5% (α = 0,05. Hasil penelitian menunjukkan bahwa: (1 penerap-an model 4-E learning cycle berpengaruh positif dan signifikan terhadap pengetahuan IPA siswa di SDK Kererobbo dengan nilai sig 0,044; (2 penerapan model 4-E learning cycle berpengaruh positif dan signifikan terhadap keterampilan proses dasar IPA siswa di SDK Kererobbo dengan nilai sig 0,020; dan (3 penerapan model 4-E learning cycle berpengaruh positif dan signifikan terhadap sikap ilmiah siswa di SDK Kererobbo dengan nilai sig 0,000. Kata Kunci: the 4-E Learning Cycle, pembelajaran ekspositori, pengetahuan sains, keterampilan proses dasar, sikap ilmiah.

  1. The Use of Organizational Strategies to Improve Memory for Prose Passages.

    Science.gov (United States)

    Byrd, Mark

    1986-01-01

    Examined effects of enforced organizational strategies on the memory of older adults for textual material. Young and old adults sorted scrambled sentences of a prose passage into the correct order. When older adults were required to make an in-depth analysis to sort material, their incidental memory for textual information was approximately equal…

  2. USULAN PERBAIKAN PROSES BISNIS DENGAN KONSEP BUSINESS PROCESS REENGINEERING (STUDI KASUS : PERMATA GUEST HOUSE

    Directory of Open Access Journals (Sweden)

    Bhaswara Adhitya Wardhana

    2013-04-01

    Full Text Available Permata Guest House Semarang merupakan usaha bisnis yang bergerak di bidang jasa penginapan. Perkembangan skala bisnis Permata Guest House yang pesat tidak disertai dengan penataan dan pengelolaan proses bisnis (Business Process yang memadai, mengakibatkan banyak kemunculan keluhan dari stakeholder, yaitu dari pelanggan (customer, dan kalangan internal karyawan. Key Performance Indicator (KPI yang digunakan dalam penelitian terhadap Permata Guest House ini adalah KPI yang diturunkan dari Critical Success Factor (CSF. Pengukuran kinerja dilakukan dengan berdasarkan indikator performansi (Performance Indicator yang telah ditentukan pada observasi awal beserta ukuran dan target yang dicapai untuk tiap indikatornya. Dari hasil observasi awal didapatkan selisih indikator moral kerja dan loyalitas sebesar 20%, komplain keramahtamahan sebesar 16,67%, komplain penampilan dan sikap sebesar 16,67%, tingkat okupansi marketing sales sebesar 30%, dan kepuasan layanan sebesar 77,78%. Berdasarkan analisis pengukuran kinerja dan proses bisnis telah didapatkan faktor-faktor yang menyebabkan kinerja proses bisnis belum sesuai target, salah satu penyelesaian untuk dapat memperbaiki kinerja adalah dengan merancang ulang proses bisnis dengan menggunakan metode Business Process Reengineering (BPR. Dari hasil BPR perlu dilakukan peninjauan kembali (rethinking, perancangan ulang (redesign, dan evaluasi (retool terhadap model kinerja bisnis. Hasil dari rekayasa ulang proses bisnis berupa pembakuan usulan proses bisnis, penyusunan visi misi perusahaan, perancangan struktur organisasi dan job description, serta penyusunan Standart Operating Procedure Kata Kunci  : critical success factor, key performance indicator, business process reengineering   Abstract Permata Guest House Semarang is a business engaged in the lodging services. The development of business scale rapid Permata Guest House is not accompanied by the administration and management of business processes are

  3. Study of Music in Prose Works of 5th and 6th Century: on the Basis of Farsi Works of Ahmad GHazali Abstract

    Directory of Open Access Journals (Sweden)

    Abdollah Hasanzadeh Mir Ali

    2013-05-01

    Full Text Available Abstract One of the important methods of defamiliarization is the order according to formalist /association of the words in the verse, whose foundation is rhythm and music of phonemes and the factors personify each word. Literal works, by the we get music element benefit from particular criteria and the web of these elements in prose and poetic works have special characteristics’. Farsi works of Ahmad Qazali are the examples of prose poems in which music helps the effective inspiration at the message. on this aspect different kids of exterial music (prosodic and phonemic rhythm, side music (rime and order internal music (pan, middle rimes and coordination of internal vowels and consonants or phonemic tone spiritual music (avidity of coordination’s of one or some rimes according to paradox , parallel and soon in Farsi works of Ahmad Qazali – by the use of a kind of defamiliarization and prominent – making – are applied to inspire the message in a best manner .   Persian works of Ahmad Qazali are among mystic Prose works. The attraction of this piece of work is more due to its poetic prose which has turned it to an attractive prose poem. So far, nothing has been done regarding the characteristics of this kind of prose except in the literature history and methodology, and it was only in the field of literary criticism. Thus, we consider it as our duty to analyze these works from a new literary perspective, which is the investigation of works in terms of the originality of word in contrast to the originality of meaning. So, we have investigated the Persian works of Qazali in the area of music- as one of the four major elements of poem- in terms of application of exterior, interior, marginal and moral music. These factors have played a significant role in giving rhythm to the prose in order to surprising the audience due to the highlighting the language. There is no nation which is deprived of music. So, we should accept that music is an

  4. Pembuatan Fuel dari Liquid Hasil Pirolisis Plastik Polipropilen Melalui Proses Reforming Dengan Katalis NiO/γ-Al2O3

    Directory of Open Access Journals (Sweden)

    Mahendra Fajri Nugraha

    2013-09-01

    Full Text Available Estimasi jumlah timbulan sampah di Indonesia pada tahun 2008 mencapai 38,5 juta ton/tahun. Melihat dari sifat penyusun plastik yang tersusun dari komponen hidrokarbon minyak bumi, maka limbah plastik sangat berpotensi untuk dikonversi menjadi BBM. Tujuan penelitian ini Mempelajari proses konversi limbah plastik khususnya jenis polipropilen (PP menjadi fuel serta pengaruh berbagai macam komposisi katalis NiO/γ-Al2O3, temperatur, laju alir reaktan pada reactor reforming terhadap kualitas fuel (yield aromatis yang dihasilkan. Pada penelitian ini bahan baku yang digunakan merupakan plastik jenis Polipropilen (PP. Pada penelitian ini minyak yang telah dihasilkan pada proses pirolisis selanjutnya akan di reforming. Pada penelitian ini digunakan logam NiO dengan penyangga γ-Al2O3 (NiO/γ-Al2O3 sebagai katalis untuk proses reforming minyak hasil pirolisis plastik polipropilen. Variabel penelitian meliputi Loading Ni (% massa : 6; 10; 14, Laju alir (ml/jam : 2I7; 500; 690, Suhu reaksi (oC : 400; 450; 500. Berdasarkan hasil penelitian dan analisa diketahui bahwa % yield aromatis terbesar pada proses reforming minyak hasil pirolisis plastik polipropilen dihasilkan dengan kondisi operasi 14 % loading Ni pada katalis, temperatur reforming 500oC serta laju reaktan sebesar 217 mL/jam. Dengan kata lain dapat disimpulkan bahwa pada penelitian ini, hasil terbaik didapat pada variabel flowlaju terendah dan variabel suhu tertinggi. Kondisi operasi efektif dalam pembuatan fuel pada proses reforming diperoleh saat loading Ni pada katalis NiO/γ-Al2O3 14 %, temperatur reforming 400oC serta laju reaktan 500 mL/jam.

  5. Aplikasi Sistem Informasi Hotel Berbasis Android

    Directory of Open Access Journals (Sweden)

    Putu Arismawan Jaya Kusuma

    2015-04-01

    Full Text Available Hotel merupakan fasilitas yang sudah menjadi kebutuhan yang sangat penting bagi masyarakat meliputi kebutuhan traveling antar kota dalam urusan bisnis maupun wisata. Teknologi informasi dalam pengolahan informasi sangatlah diperlukan dalam pengolahan data instansi hotel agar data dapat dikelola dengan baik sehingga membantu pengelola dalam melakukan pengambilan keputusan. Kecepatan dan efisiensi suatu sistem dalam pengolahan data manajerial hotel kini menjadi suatu hal mutlak yang diperlukan dalam kompetisi di dunia bisnis perhotelan. Sistem informasi berbasis Android merupakan solusi tepat untuk mengatasi permasalahan kebutuhan pengolahan data manajerial hotel yang bersifat dinamis dan dapat diakses secara mobile. Perangkat mobile yang terintegrasi dengan web merupakan salah satu pilihan yang tepat untuk mengolah sistem informasi perhotelan, dalam pelaksanaan administrator sistem informasi dapat mengelola data dari server database. Seorang user dapat memperoleh informasi dengan membuat permintaan dari aplikasi yang telah terpasang sebelumnya pada smartphone android, ke database. Segala proses pertukaran data disimpan pada server web. Kata kunci : Teknologi, Sistem Informasi, Hotel, Front Office

  6. KOMBINASI ALGORITMA AES, RC4 DAN ELGAMAL DALAM SKEMA HYBRID UNTUK KEAMANAN DATA

    Directory of Open Access Journals (Sweden)

    Adi Widarma

    2016-01-01

    Full Text Available Pengiriman atau pertukaran data adalah hal yang sering terjadi dalam dunia teknologi informasi. Data yang dikirim kadang sering berisi data informasi yang penting bahkan sangat rahasia dan harus dijaga keamanannya. Untuk menjaga keamanan data, dapat dilakukan dengan menggunakan teknik kriptografi. Algoritma AES dan RC4 adalah salah satu dari algoritma simetri. Kelemahan dari algoritma simetri adalah proses enkripsi dan dekripsi menggunakan kunci yang sama. Untuk mengatasi tersebut dilakukan dengan menggunakan algoritma Elgamal. Algoritma Elgamal adalah termasuk algoritma asimetri. Algoritma Elgamal digunakan untuk mengamankan kunci dari algoritma AES dan RC4. Peningkatan keamanan pesan dan kunci dilakukan dengan algoritma hybrid. Algoritma hybrid dengan mengkombinasikan beberapa algoritma baik algoritma simetri maupun algortima asimetri akan menambah keamanan sehingga menjadi lebih aman dan powerful (Jain & Agrawal 2014. Penelitian ini akan dilakukan metode hybrid yaitu mengkombinasikan beberapa algoritma kriptografi dengan menggunakan algoritma Advanced Encryption Standard (AES dan RC4 untuk kerahasiaan data serta algoritma Elgamal digunakan untuk enkripsi dan dekripsi kunci.

  7. KAJIAN IKATAN HIDROGEN DAN KRISTALINITAS KITOSAN DALAM PROSES ADSORBSI ION LOGAM PERAK (Ag

    Directory of Open Access Journals (Sweden)

    C. Purnawan

    2012-11-01

    Full Text Available Telah dilakukan kajian tentang ikatan hidrogen inter dan intramolekuler kitosan yang dapat menyebabkan perubahan keteraturan dan tingkat kristalinitas polimer kitosan akibat masuknya ion logam Ag ke dalam polimer kitosan. Hasil penelitian menunjukkan bahwa masuknya ion logam Ag ke dalam polimer kitosan dapat mempengaruhi mempengaruhi ikatan hidrogen inter dan intramolekuler sehingga menyebabkan perubahan keteraturan dan tingkat kristalinitas polimer kitosan. Kristalinitas kitosan meningkat hingga perbandingan Ag/kitosan = 0.25/100 (b/b. Setelah perbandingan Ag/kitosan lebih besar dari 0.25/100 (b/b, kristalinitas kitosan menurun.

  8. Model Penilaian Kapabilitas Proses Optimasi Resiko Ti Berdasarkan Cobit 5

    OpenAIRE

    Putri, Rahmi Eka

    2015-01-01

    Teknologi informasi (TI) saat ini telah menjadi kebutuhan yang mendasar bagi setiap organisasi dan tidak jarang sebuah organisasi memiliki ketergantungan yang tinggi terhadap TI. Resiko penggunaan TI di organisasi harus dikelola dengan baik, agar resiko penggunaan TI dapat diminimalisasi dan TI dapat membantu dalam pencapaian tujuan organisasi. Optimasi resiko penggunaan TI di organisasi merupakan salah satu domain dalam tata kelola TI berdasarkan COBIT 5. Proses ini bertujuan untuk memastika...

  9. CLARIFY (Trademark): An On-Line Guide for Revising Technical Prose,

    Science.gov (United States)

    1983-11-01

    it appears that writers nominalize in an unconscious attempt to make their prose sound significant. Sociolinguistic studies consistently show that...technical information more effectively than a varied mix of long and short sentences. And there are no empirical studies to suggest that varied sentence...earlier studies , especially those that contrast memory and comprehension - 18 - topic" and "agent." New instance,;--that is, elements of new sentences

  10. Pengaruh Media Massa terhadap Proses Peradilan Pidana dalam Kasus Pencurian Kakao oleh Minah

    Directory of Open Access Journals (Sweden)

    Kurniawan Akbar

    2013-04-01

    Full Text Available Di dalam upaya penegakan hukum, media massa memiliki pengaruh yang cukup penting melalui pemberitaannya kepada masyarakat terhadap suatu perkara. Media massa mampu menciptakan suatu opini publik dalam masyarakat terhadap suatu perkara hukum dengan informasi dan berita yang disampaikannya.  Melalui opini publik yang dibangun dalam masyarakat, media massa melakukan fungsi kontrol terhadap proses peradilan atas suatu perkara hukum, tidak terkecuali dalam perkara pidana. Penelitian ini bertujuan untuk menganalisis pengaruh media massa pada proses peradilan pidana dalam kasus pencurian kakao oleh Minah. Data yang digunakan adalah primer dan sekunder. Adapun analisis yang digunakan menggunakan pendekatan yuridis-empiris. Hasil penelitian ini menunjukkan bahwa opini publik terhadap perkara pencurian 3 (tiga kilogram kakao merupakan salah satu contoh dari fungsi kontrol yang dijalankan oleh media massa, dalam hal ini media massa menyoroti proses peradilan pidana yang tidak berkeadilan bagi Minah. Pengaruh media massa tersebut tampak di dalam proses persidangan terhadap terdakwa Minah oleh majelis hakim pada acara sidang III, yaitu dalam hal pertimbangan putusan yang dijatuhkan oleh majelis hakim terhadap terdakwa. In law enforcement, the media has a significant impact to the community through the preaching of a case. The mass media are able to create a public opinion on a matter of law with which it conveys information and news. Through public opinion in society, mass media perform the control functions of the judicial process of a lawsuit, not the exception in criminal cases. This study aims to analyze the influence of mass media on criminal justice processes in cases of theft of cocoa by Minah. The data used are the primary and secondary. The analysis used juridical-empirical approach. These results indicate that public opinion against theft case 3 (three pounds of cocoa is one example of a control function that is run by the mass media. Mass media

  11. Response Requirement and Nature of Interpolated Stories in Retroactive Inhibition in Prose.

    Science.gov (United States)

    Van Mondfrans, Adrian P.; And Others

    Retroactive inhibition, a loss of memory due to learning other materials between recall and exposure to the original materials, was investigated in relation to prose. Two variables were manipulated in the study: similarity of interpolated stories (dissimilar or similar), and the response requirements (completion-recall or multiple-choice). The 190…

  12. Christian Values in Vilhelm Kyukhelbekker's Early Prose

    Directory of Open Access Journals (Sweden)

    Fedoseeva T.V.

    2013-12-01

    Full Text Available This article examines Vilhelm Kyukhelbekker's narrative prose of the first half of the 1820s. For the analysis we have chosen the most significant works of this period — his book of travel notes The Journey and the novel Ado. The study reveals the writer's attitude to Christianity and Christian values in his early period of work. In this research the axiological approach is used, as well as the methods of historical, typological, structural and semiotic study of literary texts. Studying The Journey, we performed a detailed analysis of the author's letters which describe the paintings by the artists of Flemish and Dutch schools, as well as German and Italian painters of the 17th and 18th centuries exhibited in the Dresden gallery. The writer prefers the paintings of biblical subjects to those of naturalistic everyday scenes. He pays special attention to the evangelical themes. He is attracted by Christ the child's divine nature and the heavenly purity, high humility of the Mother of God's image, and the fact that St. Sebastian is portrayed as joyfully suffering for Christ. Historical events of the novel Ado date back to the time of the Baltic peoples' forced Christianization by the Order of the Brothers of the Sword. Baltic peoples are trying to keep the faith of their ancestors and rebel against the cruel governor of the Order. The novel focuses particularly on one knight, Michael, who stood up for the oppressed and like Archangel Michael found himself on the cutting edge of Good and Evil. This character of the novel is connected with the idea of Christian sacrificial love and eternal spiritual life, which was very important for Kyukhelbekker. We concluded that even in his early prose Kyukhelbekker expressed the main spiritual and moral values of Christianity.

  13. CHRISTIAN VALUES IN VILHELM KYUKHELBEKKER'S EARLY PROSE

    Directory of Open Access Journals (Sweden)

    Tatiana Vasilyevna Fedoseeva

    2013-11-01

    Full Text Available This article examines Vilhelm Kyukhelbekker's narrative prose of the first half of the 1820s. For the analysis we have chosen the most significant works of this period — his book of travel notes The Journey and the novel Ado. The study reveals the writer's attitude to Christianity and Christian values in his early period of work. In this research the axiological approach is used, as well as the methods of historical, typological, structural and semiotic study of literary texts. Studying The Journey, we performed a detailed analysis of the author's letters which describe the paintings by the artists of Flemish and Dutch schools, as well as German and Italian painters of the 17th and 18th centuries exhibited in the Dresden gallery. The writer prefers the paintings of biblical subjects to those of naturalistic everyday scenes. He pays special attention to the evangelical themes. He is attracted by Christ the child's divine nature and the heavenly purity, high humility of the Mother of God's image, and the fact that St. Sebastian is portrayed as joyfully suffering for Christ. Historical events of the novel Ado date back to the time of the Baltic peoples' forced Christianization by the Order of the Brothers of the Sword. Baltic peoples are trying to keep the faith of their ancestors and rebel against the cruel governor of the Order. The novel focuses particularly on one knight, Michael, who stood up for the oppressed and like Archangel Michael found himself on the cutting edge of Good and Evil. This character of the novel is connected with the idea of Christian sacrificial love and eternal spiritual life, which was very important for Kyukhelbekker. We concluded that even in his early prose Kyukhelbekker expressed the main spiritual and moral values of Christianity.

  14. EFEK GENDER DAN TIPE KEPRIBADIAN DALAM PROSES PEMEROLEHAN BAHASA JAWA SEBAGAI BAHASA KEDU

    Directory of Open Access Journals (Sweden)

    Paundra Pristyasiwi

    2018-02-01

    Full Text Available Pemerolehan bahasa kedua tidak lepas dari beberapa faktor pendukung dan faktor penghambat. Salah satu faktor yang berpengaruh dalam keberhasilan proses pemerolehan bahasa kedua adalah usia, jenis kelamin dan tentunya perbedaan kepribadian setiap individu. Tujuan dari penelitian ini adalah untuk mendiskripsikan efek gender dan tipe kepribadian terhadap pemerolehan bahas Jawa sebagai bahasa kedua pada siswa di SMK Giki 1 Surabaya. Penelitian ini dilakukan pada siswa kelas sebelas dan duabelas yang berasal dari luar Jawa (Surabaya tahun akademik 2017/2018. Metode penelitian yang digunakan adalah metode deskriptif kualitatif dengan model analisis kategoris deskriptif. Hasil penelitian ini membuktikan bahwa (1 terdapat perbedaan pada proses pemerolehan bahasa kedua atara siswa perempuan dan laki-laki, siswa perempuan memiliki kemauan dan kemampuan yang lebih tinggi daripada siswa laki-laki, (2 terdapat perbedaan penguasaan pemerolehan bahasa pada siswa berkepribadian ekstrovert dan introvert, siswa ektrovert memiliki kompetensi pemerolehan lebih tinggi daripada siswa berkepribadian introvert.

  15. OPTIMASI PROSES PEMBUATAN BUBUK OLEORESIN LADA (Piper nigrum MELALUI PROSES EMULSIFIKASI DAN MIKROENKAPSULASI (Optimization Process Production Powder of Oleoresin Pepper (Piper nigrum by Process of Emulsification and Microencapsulation

    Directory of Open Access Journals (Sweden)

    Firdaus Syafi'i

    2016-10-01

    Full Text Available The aim of this study was to improve the quality of pepper product by optimize process of emulsification and microencapsulation. The experimental design used in this study was Response Surface Methodology (RSM. The results showed that the selected emulsifier was arabic gum that had the highest solubility in water (99.78%. The optimum point of emulsification occured at 15% of concentration arabic gum and 4 minutes of homogenization time with the result was solubility in water 99.80%, and emulsion stability 97.78%. The optimum point of microencapsulation process occured at 3:1 of maltodextrin and sodium caseinate ratio, 10% of coating material concentration, and 180°C of drying temperature with the result was essential oil content 1.04%, solubility in water 98.18%, surface oil 0.20%, water content 2.45%, oil recovery 77.07%, and the yield of microcapsule 69.87% Keywords: Pepper oleoresin, RSM, emulsification, microencapsulation ABSTRAK Penelitian ini bertujuan untuk memperbaiki kualitas mutu produk oleoresin lada melalui optimasi proses emulsifikasi dan mikroenkapsulasi. Rancangan percobaan yang digunakan adalah Response Surface Methodology (RSM. Hasil penelitian menunjukkan bahan pengemulsi yang terpilih adalah gum arab yang memiliki kelarutan tertinggi dalam air (99,78%. Titik optimum proses emulsifikasi terjadi pada konsentrasi gum arab 15% dan lama homogenisasi 4 menit yang memberikan nilai kelarutan dalam air 99,80% dan stabilitas emulsi 97,15%. Titik optimum proses mikroenkapsulasi terjadi pada rasio maltodekstrin dan natrium kaseinat (3:1, konsentrasi bahan penyalut 10%, dan suhu inlet pengeringan 180°C yang memberikan nilai kadar minyak atsiri 1,04%, kelarutan dalam air 98,18%, kadar surface oil 0,20%, kadar air 2,45%, oil recovery 77,07%, dan rendemen 69,87% Kata kunci: Oleoresin lada, RSM, emulsifikasi, mikroenkapsulasi

  16. Uji kesetimbangan kalor proses sterilisasi kumbung jamur merang kapasitas 1.2 ton media tanam menggunakan tungku gasifikasi

    Directory of Open Access Journals (Sweden)

    Ahmad Maulana K

    2016-12-01

    Full Text Available Pada setiap budidaya jamur merang memerlukan proses sterilisasi dengan menggunakan uap panas yang dihasilkan dari boiler sederhana dengan tungku tradisional berbahan bakar kayu bakar. Penggunaan tungku tradisional pada aplikasi proses sterilisasi tersebut dinilai kurang efisien karena efisiensi pembakaran yang masih sangat rendah dan emisi gas buang yang mengganggu. Tungku gasifikasi memiliki kinerja yang lebih baik dari pada tungku tradisional karena memiliki efisiensi yang relatif lebih tinggi dan bebas dari asap pembakaran yang mengganggu. Untuk menggantikan tungku tradisional tersebut dengan tunggku gasifikasi, harus dilakukan uji kesetimbangan kalor terlebih dahulu agar dapat diketahui kebutuhan energi yang diperlukan pada proses sterilisasi tersebut. Dengan uji kesetimbangan kalor dapat diketahui perbandingan energi input pada sisi bahan bakar dengan energi yang termanfaatkan (energi output dan energi yang terbuang (heat losses selama proses sterilisasi tersebut berlangsung. Pengujian dilakukan dengan menggunakan kumbung jamur ukuran sebenarnya yang ada di lapangan dengan jumlah media tanam jamur merang sekitar 1.2 ton limbah kapas menggunakan tungku gasifikasi yang dibuat dari drum bekas oli. Pengujian dilakukan dengan dua variasi bahan bakar pada reactor gasifikasinya yaitu bahan bakar limbah kapas dan bahan bakar limbah sekam padi. Dari hasil uji yang didapat, limbah kapas memiliki jumlah energi output yang lebih besar daripada limbah sekam padi (energi output pada limbah kapas sebesar 8.4% dari energi inputnya dan limbah sekam padi memiliki 7.9% energi output. Namun jika dilihat dari efisiensi pembakarannya, limbah sekam padi memiliki efisiensi yang lebih tinggi daripada limbah kapas (28.0% untuk limbah sekam padi dan 27.2% untuk limbah kapas.

  17. Formation of Critical Realism Principles in Kazakh Prose

    Directory of Open Access Journals (Sweden)

    Zhansaya Zharylgapov

    2012-12-01

    Full Text Available The article is focused on aesthetic principles of the critical realism of the early XX century, which found their expression in the manner of leading artistic method in Kazakh poetry and in political-social lyric poetry. Kazakh prose, which was formed in the critical form during the new type of the realism developed as a definite ideological-artistic method. Due to this fact, the authors conclude that the origin of the realism in Kazakh literature originate from the novels by S. Kubeev "Kalym", M. Kashimov "Bednaya Mariyam", S. Toraygyrov "Krasavitsa Kamar", "Kto vinovat?" and "Neshchastnaya Zhamal" by M. Dulatov.

  18. KAJIAN PROSES PEMBUATAN TEPUNG BUAH MANGGA (Mangivera Indica L VARIETAS ARUMANIS DENGAN SUHU PERENDAMAN YANG BERBEDA

    Directory of Open Access Journals (Sweden)

    Octavianti Paramita

    2013-05-01

    Full Text Available Salah satu diversifikasi produk olahan yang menarik untuk dikembangkan adalah tepung da-ging buah mangga (mango powder yang telah dikembangkan di negara India, Tepung buah mangga dapat digunakan sebagai bahan alternatif untuk membuat DF (dietary fibre, karena daging buah mangga mengandung pati yang banyak, tinggi selulosa, hemiselulosa, lignin dan carotin. Buah mangga  arumanis yang dibuat menjadi tepung mangga digunakan mangga arumanis yang belum matang / yang masih mentah. Proses perendaman sebelum dilakukan pengeringan sangat berpengaruh terhadap hasil dari tepung mangga yang dihasilkan baik berupa kandungan gizi dan warna. Penelitian ini bertujuan mendapatkan proses pembuatan tepung mangga varietas arumanis yang paling optimal hasilnya berdasarkan karakteristik fisik dan komposisi zat gizi. Proses pembuatan tepung mangga varietas arumanis yang paling optimal hasilnya dengan proses perendaman pada air dingin dan proses tersebut bisa dijadikan bahan dasar pembuatan olahan-olahan pangan yang tinggi serat. Karakteristik Fisik Tepung Mangga Arumanis dan Komposisi Zat Gizi Tepung Mangga Arumanis dengan proses Perendaman Air Dingin yaitu : Tepung berwarna putih kecoklatan, Tekstur : Halus, dan tidak tercium aroma mangga, Rendemen : 12,4 %., Kadar Serat : 3,7370 %, Kadar Vitamin C : 154,9944 mg/100 g, Kandungan Amilum/ Pati : 49,0419 % dan Kandungan Protein: 9,2856 %. One of the interesting diversification of the processed products to be developed is a mango pulp powder which has been developed in India. The mango flour can be used as an alternative material for making the dietary fiber (DF because mango contains a lot of starch, high cellulose, hemicellulose, lignin, and carotin. The “arumanis” mango flour can be made from the immature “arumanis” mango fruits. The immersing process before drying greatly affect the quality of produced mangoes flour in terms of the nutrient composition and the colour. The study aimed to

  19. Efektivitas Penambahan Karbon Aktif Cangkang Kelapa Sawit (Elaeis Guineensis dalam Proses Filtrasi Air Sumur

    Directory of Open Access Journals (Sweden)

    Muhammad Fadhillah

    2016-05-01

    Full Text Available Dampak dari pencemaran air dapat menyebabkan terjadinya ketidakseimbangan ekosistem dan dapat sebagai pembawa penyakit menular. Oleh karena itu perlu dilakukan penjernihan terhadap air sebelum digunakan untuk meningkatkan kualitas air.  Salah satu  yang dapat digunakan untuk penjernihan air adalah arang aktif cangkang kelapa sawit (Elaeis guineensis. Tujuan penelitian ini adalah: Untuk mengetahui efektifitas penambahan arang aktif cangkang kelapa sawit  dalam proses  filtrasi terhadap karakter fisik (kekeruhan, Ph, bau dan rasa air sumur. Penelitian ini bersifat eksperimen dengan menggunakan Rancangan Acak Lengkap (RAL. Filtrasi air sumur dilakukan dengan 4 perlakuan  dan 3 kali ulangan yaitu: 1. tanpa melewati saringan pasir (kontrol, 2. melewati saringan pasir tanpa arang aktif cangkang kelapa sawit, 3. melewati saringan pasir dengan penambahan arang aktif cangkang kelapa sawit  dengan ketebalan 10 cm, dan 4. ketebalan 15 cm. One way ANOVA digunakan dalam analisis data. Analisa kekeruhan adalah 100,0; 50,5; 40,4; dan 47,5 berturut-turut untuk kontrol, tanpa arang aktif, dengan arang aktif 10 cm dan dengan arang aktif 15 cm. Hasil uji menunjukkan perbedaan yang bermakna antara kekeruhan air kontrol dengan kekeruhan dari perlakuan lainnya. pH air < 7 menjadi 8,99. Analisa bau dan rasa didapatkan  air yang melewati proses filtrasi dengan penambahan arang aktif menghilangkan bau dan rasa pada air tersebut. Penambahan arang aktif cangkang kelapa sawit dengan ketebalan 10 cm cukup efektif dalam proses filtrasi air sumur dan dapat memperbaiki kualitas fisik air.

  20. USAHA PENURUNAN PERSENTASE CACAT RING PISTON TIPE 4JA1 PADA PROSES HABANAKASHI MESIN BESLY

    Directory of Open Access Journals (Sweden)

    E.V. Yuliana Wibisono

    2007-01-01

    Full Text Available One of the programs that can be used to improve the quality is Six Sigma program using DMAIC method. The research is performed at PT Baninusa Indonesia (PT. BN producing the 2nd type of 4JA1 piston ring. The program is implemented to decrease the defect proportion The production process performance and the problem priority are known from the CTQ itself. The fish bone diagram is used to determine the causes of the problem. The improvement is performed by determination of the best process parameter through the fullfactorial experiment design. The result is significantly decrease defect proportion by 2.682%. Abstract in Bahasa Indonesia : Salah satu program peningkatan kualitas yang dapat mengakomodasi tuntutan peningkatan kualitas adalah program Six Sigma dengan menggunakan metode DMAIC. Penelitian dilakukan pada PT.Baninusa Indonesia (PT.BN, salah satu perusahaan yang memproduksi produk ring piston tipe 4JA1 jenis 2nd ring. Program digunakan untuk menurunkan persentase cacat produk. Dari CTQ yang ada dapat diketahui kinerja proses produksi saat ini dan prioritas permasalahan. Fish bone diagram digunakan untuk akar penyebab masalah Tindakan perbaikan yang dipilih adalah menentukan parameter proses terbaik dengan menggunakan metode eksperimen full factorial. Hasil penerapan parameter proses tersebut menunjukkan pengurangan yang signifikan terhadap persentase cacat sebesar 2,682%. Kata kunci: metoda six sigma, DMAIC, perbaikan kualitas, karakteristik kualitas kritis, diagram fish bone.

  1. Analisis Potensi Ledakan dan Kebakaran Primary Reformer sebagai Unit Proses Produksi Amonia di PT. X

    Directory of Open Access Journals (Sweden)

    Resti Ayu Lestari

    2016-12-01

    Full Text Available Peningkatan industri pupuk di dunia berimplikasi pada peningkatan jumlah industri amonia. Amonia memegang peranan penting pada proses produksi pupuk dalam hal penyediaan nitrogen. Proses pembuatan amonia melibatkan bahan baku berupa gas alam yang bersifat flammable dengan temperatur dan tekanan yang tinggi dalam setiap tahapan prosesnya. Primary reformer merupakan salah satu peralatan proses dalam produksi amonia dengan temperatur dan tekanan paling tinggi serta paling berisiko mengalami kegagalan yang dapat mengakibatkan terjadinya kebakaran/ledakan. Primary reformer berperan sebagai salah satu tahapan pemurnian gas alam dengan hasil berupa karbon monoksida. Identifikasi bahaya pada unit primary reformer dilakukan dengan menggunakan metode Fault Tree Analysis (FTA. Hasil analisis FTA menghasilkan bahwa sumber bahaya dari ledakan primary reformer dapat ditinjau dari faktor teknis dan faktor non teknis. Faktor non teknis menyumbang 74% dari penyebab terjadinya ledakan/kebakaran pada primary reformer. Hasil analisis risiko ledakan/kebakaran pada primary reformer dilakukan dengan menggunakan Dow’s Fire & Explosion Index  dengan hasil radius area dampak adalah 51 meter. Nilai kerugian finansial mencapai US$ 23.640.285 dengan kerugian hari kerja minimal adalah 138 hari. Perangkat lunak Arial Location of Hazardous Atmospheres menghasilkan radius ledakan dengan dampak terkecil yaitu dapat memecahkan kaca jendela/pintu (0,5 psi adalah 73 m dari primary reformer. Radius ledakan dengan kekuatan ledakan 1 psi (meruntuhkan rumah/perkantoran adalah 48 m dari primary reformer.

  2. PROSES BERPIKIR SISWA SEKOLAH MENENGAH PERTAMA DALAM MEMECAHKAN MASALAH MATEMATIKA BERDASARKAN LANGKAH-LANGKAH POLYA DITINJAU DARI ADVERSITY QUOTIENT

    Directory of Open Access Journals (Sweden)

    Muhammad Yani

    2016-06-01

    Full Text Available Penelitian ini dilakukan untuk menjelaskan proses berpikir dan menganalisis kesulitan siswa dalam memecahkan masalah matematika berdasarkan pengukuran Polya ditinjau dari Adversity Quotient (AQ. Penelitian ini merupakan penelitian deskirptif kualitatif dengan subjek penelitian adalah siswa dari kelas IX SMP N 1 Banda Aceh tediri dari tiga siswa. Pemilihan subjek penelitian menggunakan metode purposive sampling dan berdasarkan tingkatan AQ (climber, camper, dan quitter dan komunikasi (lisan dan tertulis. Pengumpulan data menggunakan wawancara berbasis tugas, dan triangulasi untuk mengecek validitas data. Data dianalisis menggunakan konsep dari Miles dan Huberman: yaitu tahap pengurangan data, presentasi data, dan kesimpulan. Hasil menunjukkan bahwa: (1 Proses berpikir dari subjek climber yaitu secara asimilasi dalam memahami, merencanakan penyelesaian, .serta mengecek kembali; (2 Subjek camper juga berpikir secara asimilasi pada tahap memahami masalah, merencanakan penyelesaian, dan mengecek kembali; (3 subjek quitter berpikir secara akomodasi dalam memahami masalah dan menyelesaikan masalah. Kata kunci: Proses Berpikir, Pemecahan Masalah, Tahap Polya, Adversity Quotient (AQ DOI: http://dx.doi.org/10.22342/jpm.10.1.3278.42-57

  3. FISIKA MEDIK PROSES PENDENGARAN

    Directory of Open Access Journals (Sweden)

    Lili Irawati

    2012-09-01

    Full Text Available AbstrakSuara yang didengar telinga manusia mengalami perubahan dari sinyal akustik yang bersifat mekanik menjadi sinyal listrik yang diteruskan saraf pendengaran ke otak. Proses mendengar tentunya tidak lepas dari organ pendengaran manusia yakni telinga.Telinga terdiri atas tiga bagian dasar, yaitu telinga bagian luar, telinga bagian tengah dan telinga bagian dalam. Setiap bagian telinga bekerja dengan tugas khusus untuk mendeteksi dan menginterpretasikan bunyi.Telinga bagian luar fungsi utamanya adalah mengumpulkan dan menghubungkan suara menuju meatus akustikus eksterna. Telinga bagian tengah terdiri dari 3 buah tulang (ossicle yang akan mengamplifikasikan tekanan 20 kali dari gelombang suara untuk menghasilkan getaran cairan pada koklea. Pada telinga bagian dalam terdapat koklea, membran basilaris membentuk dasar duktus koklear. Membran basilaris ini sangat penting karena di dalamnya terdapat organ korti yang merupakan organ perasa pendengaran. Organ corti, yang terletak di atas membran basilaris di seluruh panjangnya, mengandung sel rambut yang merupakan reseptor suara. Sel rambut menghasilkan sinyal saraf jika rambut permukaannya mengalami perubahan bentuk secara mekanik akibat gerakan cairan di telinga dalam. Resonansi frekuensi tinggi dari membran basilaris terjadi dekat basis, tempat gelombang suara memasuki koklea melalui jendela oval dan resonansi frekuensi rendah terjadi dekat apeks. Sel rambut dalam yang mengubah gaya mekanik suara (getaran cairan koklea menjadi impuls listrik pendengaran (potensial aksi yang menyampaikan pesan pendengaran ke korteks serebri.Kata kunci: Proses pendengaranAbstractSound heard by human ears undergo change from mechanical accustic signal to electrical signal continued by hearing nerves to brain. Of course the hearing process do not get out from human hearing organs in this case is ear.Ear comprise the three principle portions, external ear, middle ear, and internal ear. Each portion work with special

  4. Pengaruh Jenis Bahan pada Proses Pirolisis Sampah Organik menjadi Bio-Oil sebagai Sumber Energi Terbarukan

    Directory of Open Access Journals (Sweden)

    M. Sigit Cahyono

    2013-06-01

    Full Text Available Sampah organik merupakan potensi sumber energi yang melimpah di Indonesia. Sampah organik berupa daun dan ranting kering bisa dikonversi menjadi bahan bakar berupa bio-oil melalui proses fast pirolisis. Tujuan dari penelitian ini adalah untuk mengetahui pengaruh jenis bahan terhadap rendemen dan nilai kalor bio-oil yang dihasilkan dari proses pirolisis sampah organik. Bahan baku berupa daun dan ranting kering campuran tanaman angsana, mahoni dan mangga dengan komposisi daun bervariasi 0%, 50%, dan 100%, dipotong-potong dengan ukuran maksimal 10 cm. Kemudian bahan baku tersebut dipanaskan di dalam reaktor pirolisis pada suhu 500 C selama 1 jam. Hasil penelitian menunjukkan bahwa nilai kalor tertinggi (5175,35 J/g dan rendemen tertinggi (24,5% didapatkan pada bio-oil yang dihasilkan dari pirolisis ranting 100%. Kata kunci: Sampah Organik, Bio-oil, Pirolisis, Rendemen, Nilai Kalor

  5. PENGARUH POSISI ORIENTASI OBJEK PADA PROSES RAPID PROTOTYPING 3D PRINTING TERHADAP KEKUATAN TARIK MATERIAL POLYMER

    Directory of Open Access Journals (Sweden)

    Lubis Sobron

    2016-12-01

    Full Text Available Pembuatan prototipe pada industri manufaktur berkembang dengan pesat, berawal dari pembuatan secara konvensional, kemudian dilakukan dengan menggunakan mesin-mesin perkakas, dan berkembang dengan pemanfaatan komputer sebagai alat kontrol pada mesin tersebut sehingga dikenal dengan istilah CNC (computer numerically control. Pada awalnya, pembuatan prototipe dilakukan menggunakan mesin perkakas yang membentuk kontur permukaan dengan melakukan pemotongan pada  benda kerja, tentunya dalam hal ini terdapat bahan tersisa yang dikenal dengan chip. Dewasa ini perkembangan dalam pembuatan prototipe maju dengan pesat yang dikenal dengan pembuatan prototipe cepat (rapid prorotyping. Keunggulan dari rapid prototyping dalam bidang manufaktur adalah kemudahannya dalam menghasilkan suatu produk yang kompleks dengan tepat dan efisien. Proses rapid prototyping mampu merealisasikan hasil permodelan 3D software dalam bentuk nyata tanpa intervensi apapun. Dalam penelitian ini, dikaji tentang pengaruh penentuan posisi orientasi secara vertical dan horizontal terhadap kekuatan Tarik material polymer yang digunakan. Penelitian dilakukan dengan dengan menggunakan perangkat rapid prototyping tipe fused deposition modeling yakni 3D printing. Bahan filament yang digunakan jenis polymer PLA dan ABS. Proses printing dilakukan terhadap bentuk objek uji Tarik ASTM D638. Proses 3D printing dilakukan dengan memvariasikan posisi orientasi objek secara vertikal dan horizontal. Spesimen yang dihasilkan selanjutnya dilakukan uji tarik. Berdasarkan hasil pengujian yang dilakukan dapat diketahui bahwa penentuan orientasi posisi objek spesimen memberi pengaruh terhadap tegangan tarik spesimen.

  6. Peningkatan Keterampilan Proses Sains dan Hasil Belajar Fisika Siswa pada Model Pembelajaran Kooperatif Tipe Student Team Achievement Division

    Directory of Open Access Journals (Sweden)

    Happy Komike Sari

    2016-06-01

    Full Text Available Berdasarkan observasi di SMA Negeri 15 Bandarlampung, proses pelaksanaan pembelajaran fisika masih belum meraih hasil yang maksimal terutama pada siswa kelas X. Tujuan utama dari penelitian ini adalah untuk mendeskripsikan peningkatan Keterampilan Proses Sains (KPS dan hasil belajar fisika siswa menggunakan model pembelajaran kooperatif tipe Student Team Achievement Division (STAD. Penelitian ini merupakan jenis penelitian tindakan kelas yang dilaksanakan dalam tiga siklus pada 30 siswa di kelas X5 SMA Negeri 15 Bandarlampung. Setiap siklus terdiri dari perencanaan, tindakan dan pengamatan, dan refleksi. Data penelitian dikumpulkan dengan menggunakan lembar observasi untuk Keterampilan Proses Sains (KPS dan soal uraian untuk hasil belajar. Dari hasil penelitian menunjukkan bahwa model pembelajaran kooperatif tipe Student Team Achievement Division (STAD dapat meningkatkan Keterampilan Proses Sains (KPS dan hasil belajar fisika siswa dari siswa ke siswa. Based on observations in SMA NegerI 15 Bandarlampung, the implementation process of learning physics is still not achieve the maximum results, especially in class X. The main purpose of this study is to describe the increase of KPS and students’ learning achievement in learning physics using a cooperative learning model type Student Team Achievement Division (STAD. This classroom action research has been conducted in three cycles with 30 students of X5 Class of SMA Negeri 15 Bandarlampung. Every cycle consists of planning, action and observation, and reflection. The data were collected using observation sheet for KPS and essay test for learning achievement. Based on the results indicate that the cooperative learning model type STAD effectively could increase KPS and students’ learning achievement in learning physics from cycle to cycle

  7. Constrained prose recall and the assessment of long-term forgetting: the case of ageing and the Crimes Test.

    Science.gov (United States)

    Baddeley, Alan; Rawlings, Bruce; Hayes, Amie

    2014-01-01

    It has become increasingly clear that some patients with apparently normal memory may subsequently show accelerated long-term forgetting (ALF), with dramatic loss when retested. We describe a constrained prose recall task that attempts to lay the foundations for a test suitable for detecting ALF sensitively and economically. Instead of the usual narrative structure of prose recall tests, it employs a matrix structure involving four episodes, each describing a minor crime, with each crime involving the binding into a coherent episode of a specified range of features, involving the victim, the crime, the criminal and the location, allowing a total of 80 different probed recall questions to be generated. These are used to create four equivalent 20-item tests, three of which are used in the study. After a single verbal presentation, young and elderly participants were tested on three occasions, immediately, and by telephone after a delay of 6 weeks, and at one of a varied range of intermediate points. The groups were approximately matched on immediate test; both showed systematic forgetting which was particularly marked in the elderly. We suggest that constrained prose recall has considerable potential for the study of long-term forgetting.

  8. Pengaruh Variasi Mikroorganisme dan Pelarut Dalam Produksi Etanol Dari Nira Tebu (Sachharum officinarum Dengan Proses Fermentasi Ekstraktif

    Directory of Open Access Journals (Sweden)

    Yusfa Anugrah Baihaki

    2014-09-01

    Full Text Available Kebutuhan energi dari bahan bakar minyak bumi (BBM didunia semakin tahun mengalami peningkatan tajam. Salah satu energi alternatif yang didorong pemerintah Indonesia adalah dengan memproduksi bioetanol. Salah satu bahan yang sangat berpotensial sebagai bahan baku utama dalam pembuatan bioetanol adalah nira batang tebu. Upaya peningkatan produktivitas etanol dilakukan secara kontinyu dikarenakan pada fermentasi konvensional terdapat kendala pada produktivitas dan konsentrasi etanol yang rendah. Untuk itu perlu dilakukan penelitian untuk produksi etanol dengan keunggulan keterpaduan proses dan rendah energi yang selanjutnya dapat dijadikan sebagai dasar desain untuk rancang bangun skala industri kecil. Tujuan dari penelitian ini adalah untuk mengetahui performa terbaik dari variasi mikroorganisme dan pelarut yang digunakan dalam memproduksi etanol dengan proses fermentasi ekstraktif dan untuk mengetahui karakteristik kinerja sistem fermentasi kontinyu dalam bioreaktor packed bed dengan variasi mikroorganisme. Dalam penelitian ini digunakan macam variasi mikroorganisme Zymomonasmobilis A3 termutasi dan campuran Saccharomyces cerevisiae dan Pichiastipitis dengan sistem tanpa recycle dan pelarut n-Amyl Alcohol. Dari penelitian yang telah dilakukan diperoleh kesimpulan bahwa proses fermentasi kontinyu dan ekstraksi tanpa recycle menggunakan Zymomonas mobilis A3 dan pelarut n-Amyl Alkohol memberikan hasil produktivitas dan yield yang terbaik, yaitu sebesar 133,417 g/l.jam dan 35,049%.

  9. The Role of Elaboration in the Comprehension and Retention of Prose: A Critical Review.

    Science.gov (United States)

    Reder, Lynne M.

    1980-01-01

    Recent research in the area of prose comprehension is reviewed, including factors that affect amount of recall, representations of text structures, and use of world knowledge to aid comprehension. The need for more information processing models of comprehension is emphasized. Elaboration is considered important for comprehension and retention.…

  10. Proses Menjadi dalam Novel Tarian Setan Karya Saddam Hussein dan Siddhartha Karya Hermann Hesse

    Directory of Open Access Journals (Sweden)

    Sariban Sariban

    2009-06-01

    Full Text Available Artikel ini bertujuan menjelaskan pemikiran filsafat dalam novel Tarian Setan dan Siddharta (2007. Kumpulan pemikiran filsafat yang dibangun adalah hasrat karakter sebagai representasi manusia sehingga semua argumen yang dibangun berakar pada latar belakang kemunculan hasrat, proses hasrat, dan hasil hasrat. Berdasarkan pemikiran filsafat, bisa disimpulkan bahwa Hasqil dan Siddharta memiliki hasrat menjadi karena pengaruh imitasi, mimetik. Dalam proses menjadi yang disebabkan oleh mimetik, bisa diidentifikasi bahwa Hasqil lebih memiliki hasrat fisik, agresif, sementara Siddharta memiliki hasrat psikologis, reseptif. Sebagai subjek yang memiliki hasrat menjadi, Hasqil dan Siddharta bisa dianggap sebagai korban karena keduanya tidak pernah bebas dalam menentukan hasratnya sendiri. Individu adalah korban lingkungannya. Ironi tentang keterjebakan manusia pada hasrat libidinal telah didemonstrasikan oleh kedua karakter tersebut. Hasqil telah terjebak dalam hasrat libidinal sehingga menjadi orang gagal, sementara Siddharta secara sengaja menjebak dirinya sendiri untuk proses kesadaran menjadi karena prinsip bahwa hidup adalah tindakan. Hasrat kematian selalu menjadi bagian dari proses menjadi untuk tiap individu. Kematian adalah sebuah pelarian dari ketidakbahagiaan dan harapan untuk sekaligus meraih kebahagiaan. Abstract: This paper is aimed to explain the philosophical way of thinking in the novels Tarian Setan and Siddharta (2007. The collection of a way of thinking built is the character’s desire as a human representation so that all arguments built are rooted in the background of desire emergence, desire process, and desire result. Based on the philosophical way of thinking, it can be concluded that Hasqil and Siddharta have a desire of being for the influence of imitation, mimetic. In the process of being caused by the mimetic, it can be identified that Hasqil has a more physical desire, aggressive, whereas Siddharta has a psychological desire

  11. MENDOBRAK KELEMAHAN LITIGASI KONVENSIONAL MELALUI MODEL ADVOKASI MANDIRI DALAM RANGKA PEMBAHARUAN PROSES PERADILAN

    Directory of Open Access Journals (Sweden)

    Rd. Dewi Asri Yustia

    2016-01-01

    tindak pidana dominan bersumber dari KDRT. Penelitian ini menggunakan metode yuridis normatif dengan didukung metode yuridis empiris, melalui pendekatan multidisiplin yaitu pendekatan dari aspek hukum perdata dan hukum pidana serta hukum acara. Data yang diperoleh kemudian dianalisis secara yuridis kualitatif. Hasil penelitian menunjukan bahwa, model litigasi konvensional, mengarahkan pada seluruh proses hukum yang akan dilalui diserahkan seluruhnya kepada penasihat hukum. Model litigasi ini belum memberikan pengetahuan, pemahaman dan kesadaran hukum terhadap perempuan pelaku tindak pidana (korban termarginalkan. Hasil penelitian ini merekomendasikan perlunya model litigasi mandiri. Model ini diharapkan mampu mengakomodasi kebutuhan berlitigasi dari perempuan pelaku tindak pidana, sehingga dapat mengadvokasi dirinya sendiri pada saat menghadapi proses beracara. Selain itu, diharapkan model advokasi mandiri ini dapat dijadikan alternatif baru di dalam proses peradilan, dan dapat dijadikan alasan pertimbangan untuk dilakukannya upaya pembaharuan proses peradilan. Kata Kunci :   Pemberdayaan; Perempuan; Advokasi Mandiri; Pembaharuan

  12. Proses Komunikasi Interpersonal Antara Orang Tua Tunggal (Ibu) Dengan Anak Dalam Mempertahankan Intimacy

    OpenAIRE

    Suryadinata, Elvany

    2016-01-01

    Penelitian ini membahas mengenai proses komunikasi antara ibu sebagai orang tua tunggal, dengan anak dalam mempertahankan intimacy dengan metode studi kasus. Menggunakan teori elemen komunikasi interpersonal dari Devito, yang terdiri dari sumber-penerima, enkoding-dekoding, pesan, media, hambatan, konteks, etika, dan kompetensi. Intimacy diantara mereka dikategorikan ke dalam 4 dimensi yaitu kedekatan emosional, kontak fisik, shared activities, serta intellectual sharing. Hasil penelitian men...

  13. The trend of dystopia in contemporary Croatian prose

    Directory of Open Access Journals (Sweden)

    Igor Gajin

    2015-09-01

    Full Text Available In contemporary Croatian prose from 2010 to the present day, there has been an abundant series of novels with dystopian content that has introduced, so to speak, a new genre in the Croatian literary tradition, since in the diachrony of this national literature the dystopian themes have barely been represented. The paper intends to construe the cultural context of the cause of this phenomenon and point to the link in the structure of feelings formed by the processes of transition, globalization and neoliberal capitalism with the manifestation of the intensification of the dystopian genre as a motivated discursive manoeuvre by which social criticism is moved from the present “realistic prose” to “fantasy” imaginings of the future.

  14. The Prose of Anastasia I. Tsvetaeva: Autobiographical Mythmaking

    Directory of Open Access Journals (Sweden)

    Ekaterina A. Esenina

    2017-12-01

    Full Text Available Anastasia Tsvetayeva’s literary work can be largely defined as autobiographical. Her first pen probe, “Royal reflections,” is a philosophical essay where the author represents herself as a “theomachist” and the debunker of all moral values. Later, Tsvetaeva ventured into the genre of autobiographical novel, yet her novel may be called “autobiographical” only with some reservations. On the one hand, this work reflects real facts of the author’s life. On the other, the narrator, at some points, deliberately departs from truth, obscures and alters the facts, pursuing specific aims. The elements of autobiographical mythmak- ing may be found in the Memoirs of Anastasia Tsvetayeva that would be worthwhile to compare with the autobiographical prose of her elder sister Marina.

  15. Perancangan Aplikasi Berbasis Komputer untuk Proses Manajemen Mutu pada Pembangunan Kapal Baru

    Directory of Open Access Journals (Sweden)

    Renny Rahmadi Putra

    2017-01-01

    Full Text Available Manajemen mutu di galangan kapal saat ini belum dilaksanakan dengan sistematis. Hasil proses pemeriksaan pembangunan kapal baru, masih disimpan di dalam lemari dan folder–folder komputer secara terpisah. Manajemen pemeriksaan belum didukung dengan sistem yang mempermudah pihak Galangan, Owner Surveyor, Class dan State Regulator dalam pengawasan, pencarian, review, evaluasi dan pelaksanaan pemeriksaan. Tugas akhir ini bertujuan untuk merancang aplikasi berbasis komputer dalam membantu pelaksanaan manajemen mutu pada pembangunan kapal baru yang lebih baik. Pertama, dilakukan observasi sistem manajemen mutu di galangan kapal, diambil sebagai sampel adalah Galangan PT. PAL Indonesia. Kedua, ditentukan parameter–parameter yang diperlukan dalam aplikasi manajemen mutu. Ketiga, dilakukan perancangan aplikasi manajemen mutu berdasarkan parameter–parameter aplikasi. Parameter–parameter di dalam aplikasi diidentifikasi selama tahapan pembangunan kapal, proses, komponen kapal dan dokumen kapal, serta item pemeriksaan dan standar pemeriksaan. Software yang digunakan untuk perancangan aplikasi adalah kombinasi bahasa pemograman PHP, text editor Sublime Text 2 dan database MySQL. Aplikasi berbasis komputer yang dirancang dapat membantu pelaksanaan manajemen mutu dalam pengawasan, pencarian, review, evaluasi dan pelaksanaan pemeriksaan. Setelah aplikasi dibuat, dilakukan uji perbandingan sistem dan uji verifikasi, didapatkan hasil bahwa aplikasi lebih baik dibandingkan dengan sistem eksisting yang secara perseorangan dijalankan di galangan kapal.

  16. PEMANFAATAN HUTAN MELALUI PEMBELAJARAN BIOLOGI TERINTEGRASI UNTUK MENINGKATKAN KETERAMPILAN PROSES SAINS DAN SIKAP ILMIAH

    Directory of Open Access Journals (Sweden)

    Nurmaliahayati S.Pd.

    2013-04-01

    Full Text Available Penelitian ini bertujuan untuk menganalisis peningkatan keterampilan proses sains (KPS dan sikap ilmiah melalui pemanfaatan hutan dalam pembelajaran biologi terintegrasi tipe connected. Metode penelitian yang digunakan adalah metode weak experiment dengan desain one group pretest-postest dilaksanakan di SMA Negeri di Krayan Kalimantan Timur kelas X tahun ajaran 2011-2012 Pengumpulan data dilakukan melalui pretest dan postest untuk KPS dan sikap ilmiah, lembar observasi aktivitas guru dan siswa untuk menjaring informasi mengenai kegiatan selama pembelajaran berlangsung. Data dianalisis dengan uji perbedaan dua rata-rata, yaitu paired samples T Test dalam program komputer SPSS 16 for windows. Hasilnya terdapat perbedaan signifikan antara skor tes awal dan skor tes akhir KPS dan sikap ilmiah siswa. Rerata N-gain KPS dan sikap ilmiah berturut-turut adalah 0,46 dan 0,35 (sedang. Tingkat presentase keterlibatan siswa pada tiap pertemuan semakin mendekati 100%, artinya hampir semua siswa terlibat aktif dalam melakukan pembelajaran. Dapat disimpulkan bahwa terdapat peningkatan KPS dan sikap ilmiah siswa setelah melalui pemanfaatan hutan dalam pembelajaran biologi terintegrasi tipe connected. Kata Kunci : keterampilan proses sains, pemanfaatan hutan, pembelajaran terintegrasi, sikap ilmiah

  17. Proses Kondensasi Imaji dan Pengalihan Mimpi dalam Dongeng Nenek Pakande

    Directory of Open Access Journals (Sweden)

    Nuraidar Agus

    2013-06-01

    Full Text Available Tulisan ini bertujuan untuk mengungkap proses kondensasi imaji dan pengalihan mimpi dalam dongeng Nenek Pakande (NP berdasarkan teori psikoanalisis Freud. Pengumpulan data di lakukan secara dokumentatif atas cerita­‐cerita tentang NP, yaitu melalui teknik pembacaan, analisis teks, dan teknik elisitasi. Berdasarkan hal tersebut ditemukan bahwa gejala kondensasi dan pengalihan mimpi dalam cerita NP adalah melalui usaha penciptaan tokoh­‐tokohnya dan berdasarkan realita yang kemudian diimajinasikan. Proses tersebut melahirkan citraan tentang kemampuan akal tokoh anak kecil dengan segala usahanya untuk menaklukkan NP (raksasa. Selain itu, citra ibu tiri telah terkondensasi lewat imajinasi yang menakutkan bagi sang anak tiri linear dengan sifat­‐sifat buruk dan eksistensi supranatural NP yang mengendap dalam alam imajinasi. Abstract: This paper attempts to describe the process of condensation of reality and its imagination found in the fairy tale Nenek Pakande. This paper aims to reveal the image of the NP condensation process by Freud's psychoanalytic theory. The data was collected through the documentation on the stories of NP by reading techniques, text analysis, and elicitation techniques. Based on them, it is found that the symptoms of NP condensation in the story is through the characters venture creation and, based on what is true in reality, then imagined. It gives birth to images of a child's way of thinking and his efforts to conquer NP. In addition, the image of stepmothers has condensed through a frightening image to his stepson, and of the NP’s vices and supernatural existence living in an imagination. Key Words: Freud’s psychoanalysis, condensation, imagination, fables

  18. KOMBINASI ALGORITMA AES, RC4 DAN ELGAMAL DALAM SKEMA HYBRID UNTUK KEAMANAN DATA

    Directory of Open Access Journals (Sweden)

    Adi Widarma

    2016-01-01

    Full Text Available Abstrak — Pengiriman atau pertukaran data adalah hal yang sering terjadi dalam dunia teknologi informasi. Data yang dikirim kadang sering berisi data informasi yang penting bahkan sangat rahasia dan harus dijaga keamanannya. Untuk menjaga keamanan data, dapat dilakukan dengan menggunakan teknik kriptografi. Algoritma AES dan RC4 adalah salah satu dari algoritma simetri. Kelemahan dari algoritma simetri adalah proses enkripsi dan dekripsi menggunakan kunci yang sama. Untuk mengatasi tersebut dilakukan dengan menggunakan algoritma Elgamal. Algoritma Elgamal adalah termasuk algoritma asimetri. Algoritma Elgamal  digunakan untuk mengamankan kunci dari algoritma AES dan RC4. Peningkatan keamanan pesan dan kunci dilakukan dengan algoritma hybrid. Algoritma hybrid dengan mengkombinasikan beberapa algoritma baik algoritma simetri maupun algortima asimetri akan menambah keamanan sehingga menjadi lebih aman dan powerful (Jain & Agrawal 2014. Penelitian ini akan dilakukan metode hybrid yaitu mengkombinasikan beberapa algoritma kriptografi dengan menggunakan algoritma Advanced Encryption Standard (AES dan RC4 untuk kerahasiaan data serta algoritma Elgamal digunakan untuk enkripsi dan dekripsi kunci. Kata Kunci :  kriptograpi, algoritma AES, RC4, Elgamal, hybrid

  19. PENGARUH MODEL PEMBELAJARAN InSTAD TERHADAP KETERAMPILAN PROSES SAINS DAN HASIL BELAJAR KOGNITIF FISIKA DI SMA

    Directory of Open Access Journals (Sweden)

    Richie Erina

    2015-10-01

    Full Text Available Penelitian ini bertujuan untuk mengetahui pengaruh model pembelajaran InSTAD terhadap: (1 keterampilan proses sains peserta didik, (2 hasil belajar kognif peserta didik, dan (3 proses sains dan hasil belajar kognitif peserta didik. Penelitian ini merupakan penelitian kuantitatif dengan mengguna-kan desain kuasi eksperimen. Analisis data menggunakan Independent t-test dan MANOVA. Hasil penelitian menunjukkan: (1 penerapan model pembelajaran InSTAD secara signifikan lebih berpengaruh positif terhadap keterampilan proses sains dibandingkan model pembelajaran inkuiri terbimbing, dan hal ini ditunjukkan dengan output (t= 7.47 dan 7.53 dengan signifikansi sebesar 0.00 (sigifikansi < 0.05; (2 penerapan model pembelajaran InSTAD secara signifikan lebih berpengaruh positif terhadap hasil belajar kognitif dibandingkan model pembelajaran inkuiri terbimbing, dan hal ini ditunjukkan dengan output (t= 4.41dan 5.00 dengan signifikansi sebesar 0.00 (sigifikansi < 0.05; (3 penerapan model pembelajaran InSTAD secara signifikan lebih berpengaruh positif terhadap keterampilan proses sains dan hasil belajar kognitif dibandingkan model pembelajaran inkuiri terbimbing, dan hal ini ditunjukkan dengan output (F= 26.36 dan signifikansi sebesar 0.00 (sigifikansi < 0.05. Kata Kunci: InSTAD, keterampilan proses sains, hasil belajar kognitif   THE EFFECT OF InSTAD LEARNING MODEL ON THE SCIENCE PROCESS SKILLS AND COGNITIVE LEARNING OUTCOMES IN PHYSICS IN SENIOR HIGH SCHOOL Abstract This study aims to find out the effect of InSTAD learning model on: (1 the science process skills of the students, (2 the cognitive learning outcomes of the students, (3 the science process skills and cognitive learning outcomes of the students. This study is a quantitative research using a quasi-experimental design. The data analysis used the Independent t-test and MANOVA. The results show that: (1 the implementation of InSTAD learning model gives a significantly more positive effect to the

  20. Flawlessi tankeriga sõitnud Küprose firma ei võta merereostuse tekitamist omaks / Martin Hanson

    Index Scriptorium Estoniae

    Hanson, Martin, 1984-

    2006-01-01

    Flawlessi tankeriga opereerivat Küprose firmat Hanseatic Shipping ei saa reostuses süüdistada, sest nemad vedasid rasket kütteõli, kuid Lääne-Eesti rannikult leiti pooltahke õlimass. Vt. samas: Piret Reiljan. Alambra reostuse puhul jäi Eestil trahv saamata; Prokuratuuril sadu kahtlusaluseid

  1. ANALISIS KOMPETENSI PROFESIONAL GURU ADMINISTRASI PERKANTORAN DALAM PROSES PEMBELAJARAN DI SMK TAMTAMA PREMBUN KABUPATEN KEBUMEN

    Directory of Open Access Journals (Sweden)

    Diah Ayu

    2016-03-01

    Full Text Available Tujuan dalam penelitian ini untuk menganalisis dan mendeskripsikan: 1 Kompetensi profesional guru administrasi perkantoran dalam proses pembelajaran, 2 Penerapan kompetensi profesional guru administrasi perkantoran dalam proses pembelajaran. Penelitian ini menggunakan metode penelitian deskriptif persentase. Populasi dalam penelitian ini adalah siswa X, XI, XII program keahlian Administrasi Perkantoran. Pengambilan sampel menggunakan rumus Slovin diperoleh sampel sejumlah 60 siswa. Metode pengumpulan data menggunakan angket dan dokumentasi. Teknik analisis data yang digunakan adalah analisis deskriptif persentase. Hasil penelitian menunjukkan bahwa kompetensi profesional guru administrasi perkantoran dalam proses pembelajaran menunjukkan bahwa 76% dalam kriteria baik. Guru sudah menerapkan kompetensi profesional dalam proses pembelajaran dari indikator keterampilan membuka dan menutup pelajaran sebesar 73% dalam kriteria baik. Indikator keterampilan menjelaskan sebesar 83% dalam kriteria sangat baik. Indikator keterampilan bertanya sebesar 78% dalam kriteria baik. Indikator keterampilan memberi penguatan sebesar 70% dalam kriteria baik. Indikator keterampilan menggunakan media pembelajaran sebesar 63% dalam kriteria baik. Indikator membimbing diskusi kelompok sebesar 81% dalam kriteria baik. Indikator keterampilan mengelola kelas sebesar 85% dalam kriteria sangat baik. Indikator keterampilan mengadakan variasi sebesar 80% dalam kriteria baik. Indikator keterampilan mengajar perorangan dan kelompok kecil sebesar 75% dalam kriteria baik. The purpose of this research is to analyze and describe: 1 teacher's professional competence of the administrative offices in the learning process in vocational Enlisted Prembun Kebumen, (2 Is the professional competence of teachers office administration already applied in the process of learning in vocational Enlisted Prembun Kebumen. The population is students of class X, XI, XII Administrative skills program

  2. Faktor Penghambat Proses Layanan Konseling Individual di SMA se-Kota Cilacap

    Directory of Open Access Journals (Sweden)

    Fenti Nurindahsari

    2015-12-01

    Full Text Available Berdasarkan penuturan guru BK di salah satu SMA di kota Cilacap yang pernah menjadi tempat observasi oleh peneliti, ditemukan fenomena terkait dengan layanan konseling individual di sekolah tersebut yang tidak sesuai dengan teori-teori mengenai konseling individual yang ada dalam bimbingan konseling. Contoh yang tidak sesuai dengan teori  ketika proses konseling berakhir guru BK di sekolah tersebut tidak ada upaya tindak lanjut. Tujuan penelitian ini untuk mengetahui faktor penghambat proses layanan konseling individual di SMA sekota Cilacap. Jenis penelitian deskriptif kuantitatif. Populasi dalam penelitian ini adalah konselor yang ada di SMA sekota Cilacap. Teknik sampel untuk konselor yang dipilih praktikan adalah sampling jenuh. Instrumen yang digunakan adalah angket. Validitas menggunakan rumus Product Moment. Uji reliabitilitas menggunakan rumus Alpha. Metode analisis data menggunakan deskriptif persentase. Hasil penelitian menunjukan faktor internal penghambat berasal dari konselor dalam kriteria tinggi (71,74% faktor eksternal penghambat termasuk kriteria tinggi yaitu norma (71,59%, sarpras (71,38% dan lingkungan fisik (72,39%. Dapat disimpulkan hambatan yang ada dalam proses layanan konseling individual di SMA sekota Cilacap berasal dari faktor internal dan eksternal yang memiliki kriteria yang sama yaitu dalam kategori tinggi. Based the narrative counseling teacher in one high school in Cilacap town that  once a place observation, discovered the phenomenon associated with individual counseling services in the school is not in accordance with the theories about the existing individual counseling in counseling. Examples that don’t fit with theory when the counseling process ends counseling teacher the school is’n follow-up effort. The purpose of this study to determine inhibiting factors individual counseling service process In senior high school Cilacap derby. Pupolasi in research is senior high school counselors. Technical

  3. PENGGUNAAN MEDIA DALAM PROSES BIMBINGAN KELOMPOK UNTUK MENGEMBANGKAN KREATIVITAS (Pada Siswa SMA Negeri 10 Bandar Lampung Tahun Ajaran 2007-2008

    Directory of Open Access Journals (Sweden)

    Eko Susanto

    2012-09-01

    Full Text Available Masalah pada penelitian ini adalah rendahnya kemampuan kreativitas siswa. Adapun permasalahannya, apakah penggunaan media dalam proses bimbingan kelompok dapatmeningkatkan kreativitas siswa. Tujuan penelitian ini adalah meningkatkan kemampuan kreativitas siswa dengan menggunakan media dalam proses bimbingan kelompok. Metode yang digunakan dalam penelitan ini adalah metode eksperimental semu (Quasi Experimental dengan design One Group Pretest-Posttest. Dengan subjek penelitian 12 orang siswa di SMA Negeri 10 Bandar Lampung. Hasil penelitian menunjukkan skor rata-rata pretest 116,25 dan skor rata-rata posttest 127,50. Setelah dilakukan Uji t menunjukkan adanya perbedaan skor kreativitas yang cukup signifikan antara sebelum dan sesudah mengikuti bimbingan kelompok, perbedaan skor kreativitas sampai pada taraf signifikansi 0,01, maka dapat dikatakan adanya peningkatan kreativitas antara sebelum dan sesudah dilakukan bimbingan kelompok. Dengan demikian dapat disimpulkan bahwa penggunaan media dalam proses bimbingan kelompok dapat meningkatkan kemampuan kreativitas siswa. Saran dari hasil penelitian ini menyarankan kepada guru pembimbing untuk dapat memanfaatkan media sebagai alat bantu dalam pelaksanaan layanan bimbingan dan konseling disekolah. Bagi peneliti dan mahasiswa bimbingan konseling diharapkan dapat berinovasi untuk mengembangkan media-media bimbingan yang lain dalam rangka pengembangan diri siswa.

  4. ESOTERIC IN CONTEMPORARY LITHUANIAN PROSE

    Directory of Open Access Journals (Sweden)

    Ieva Naikienė

    2018-04-01

    Full Text Available This article focuses on esotericism in contemporary Lithuanian prose. For the revelation of this topic, Donaldas Kajokas’ novel Ežeras ir kiti jį lydintys asmenys (The Lake and Other Escort Members, 2003 and Jurga Ivanauskaitė’s novel Placebas (Placebo, 2012 have been chosen. The analysed writings reveal the point of view of contemporary Lithuanian writers about esoteric beliefs. In this article, esotericism is related with persons’ feelings but is excluded from occult and parapsychology fields such as alchemy, cabbala, Tarot, etc. This work focuses on the idea that an individual, who has only a few senses, cannot reach actuality. On the other hand, the possibility of acquiring those senses is not rejected. In addition, obtaining those senses would help to reach higher, over-sensational worlds and in that way to discover personal correlation with forms of multiple personal identities. This article establishes an idea that awareness of higher worlds/spheres unlocks the possibilities of revealing the main core of human (as micro-cosmos and the Universe (as macro-cosmos. The possibility to perceive oneself as a micro-cosmos discloses not only personal identity, but also the value of Other’s entity and inevitable entities stratifying.

  5. Graphical Argument in the Essayist Prose of the Pesquisa FAPESP Journal

    Directory of Open Access Journals (Sweden)

    Irene Machado

    2016-03-01

    Full Text Available This article investigates the concept of graphical argumentation as an exercise of essayistic prose developed in the process of writing expansion in printed texts. It is understood that by expanding the scope of the word in the context of visual graphics processes such as drawings, photography and infographics, arguments are achievements much more of diagrammatic reasoning than of rhetorical elaboration. Proof of that are graphic arguments, which have become an inalienable modeling from texts of scientific communication, such as the ones produced in the Pesquisa FAPESP journal.

  6. On authorship in Samuel Beckett’s prose

    Directory of Open Access Journals (Sweden)

    Willian André

    2014-06-01

    Full Text Available This study aims at building a reflection on the notion of authorship in Samuel Beckett’s work, with a main focus on his short prose from the 60s and 70s. Thereunto, supported by the writings of Maurice Blanchot, S. E. Gontarski, João Adolfo Hansen and Hugh Kenner, we draw a route that starts with the Beckettian post-war trilogy, going through the subsequent productions that culminate in the short pieces outlined by the author after the publishing of How It Is (1961. As we take the path run by the Irish writer in his deal with failure (a path full of mud and light-grey-dark oscillations, we experience the rise of a paradoxical impression: the more severe are Beckett’s attacks against the shapes of the I, testifying the dilution of identity, more accurate become the shapes surrounding the idea of “author” that surmounts the whole of his literary project.

  7. The description of morality and manners in Vsevolod Solovyov’s short prose

    OpenAIRE

    Nikolsky Evgeny Vladimirovich

    2013-01-01

    This article contains a genre specificity of short prose by Vsevolod Solovyov, whose work is devoted to the Russian history between the 18th and 19th centuries. According to professor N.L. Vershinina, the author distinguishes the difference between the description of morality and manners. The main difference is in the presence of author’s point of view on the describing occurrences. In this case, such works are considered to be a kind of morality, which characterizes Solovyov’s works. Showing...

  8. Deteksi Fraud Menggunakan Metode Model Markov Tersembunyi Pada Proses Bisnis

    Directory of Open Access Journals (Sweden)

    Andrean Hutama Koosasi

    2017-03-01

    Full Text Available Model Markov Tersembunyi merupakan sebuah metode statistik berdasarkan Model Markov sederhana yang memodelkan sistem serta membaginya dalam 2 (dua state, state tersembunyi dan state observasi. Dalam pengerjaan tugas akhir ini, penulis mengusulkan penggunaan metode Model Markov Tersembunyi untuk menemukan fraud didalam sebuah pelaksanaan proses bisnis. Dengan penggunaan metode Model Markov Tersembunyi ini, maka pengamatan terhadap elemen penyusun sebuah kasus/kejadian, yakni beberapa aktivitas, akan diperoleh sebuah nilai peluang, yang sekaligus memberikan prediksi terhadap kasus/kejadian tersebut, sebuah fraud atau tidak. Hasil ekpserimen ini menunjukkan bahwa metode yang diusulkan mampu memberikan prediksi akhir dengan evaluasi TPR sebesar 87,5% dan TNR sebesar 99,4%.

  9. PENELITIAN SIFAT FISIS DAN MEKANIS BAJA KARBON RENDAH AKIBAT PENGARUH PROSES PENGARBONAN DARI ARANG KAYU JATI

    Directory of Open Access Journals (Sweden)

    Masyrukan Masyrukan

    2017-01-01

    Full Text Available Pada penelitian ini, proses pengarbonan (carburising yang dilakukan adalah dengan menambahkan kandungan unsur karbon (C ke dalam permukaan baja. Sumber karbon diperoleh dari arang kayu jati yang telah ditumbuk halus. Temperatur yang digunakan selama proses pengarbonan adalah 900°C, dengan variasi waktu penahanannya 2 jam,  4 jam, dan 6 jam. Setelah itu didinginkan dengan air (quench. Pembuatan benda uji dilakukan untuk mendapatkan sampel dan supaya memudahkan dalam pelaksanaan penelitian.  Pengujian yang dilakukan adalah pengujian struktur mikro, pengujian kekerasan dan pengujian impact.Pengujian kekerasan yang telah dilakukan terhadap material pengarbonan menghasilkan distribusi kekerasan dari permukaan menuju inti, untuk masing-masing waktu penahanan yang berbeda. Untuk waktu penahanan 2 jam mulai HVN 257,5 Kg/mm²  sampai 205,3 Kg/mm² menuju inti ; 4 jam mulai HVN 273,1 Kg/mm² sampai 204,4 Kg/mm² menuju inti ; 6 jam mulai HVN 274,6 Kg/mm²  sampai 204,4 Kg/mm² menuju inti.Hasil pengamatan foto struktur mikro melalui microscope olympus photomicrographic system dihasilkan foto struktur mikro untuk raw material dan carburising sama terdapat ferit dan perlit,  untuk yang dikarburising struktur mikronya,  yaitu ferit  dan perlit.  Semakin lama proses karburising,  semakin banyak pula kandungan perlitnya yang mengakibatkan semakin tingginya tingkat kekerasan. Hasil pengujian impak menunjukkan rata-rata harga impak untuk spesimen raw material = 0,350 J/mm2, waktu penahanan 2 jam = 1,013 J/mm2 , spesimen waktu penahanan 4 jam = 0,600 J/mm2, spesimen waktu penahanan 6 jam = 1,590 J/mm2.

  10. PERSEPSI DALAM PEMBELAJARAN PENDEKATAN KETERAMPILAN PROSES TERHADAP KEMAMPUAN KONEKSI MATEMATIS SISWA (STUDI PENELITIAN DI SMP NEGERI 1 WANRAJA

    Directory of Open Access Journals (Sweden)

    Rini Pitriani

    2017-01-01

    Full Text Available Kemampuan koneksi matematis merupakan hal yang penting namun siswa yang menguasai konsep matematika tidak dengan sendirinya pintar dalam mengoneksikan matematika. Koneksi matematis merupakan suatu keterampilan yang harus dibangun dan dipelajari. Kegiatan penyelesaian masalah kontekstual merupakan aktivitas yang membantu siswa untuk dapat mengetahui hubungan berbagai konsep dalam matematika dan mengaplikasikan matematika dalam kehidupan sehari-hari. Pendekatan keterampilan proses pada hakikatnya adalah suatu pengelolaan kegiatan belajar-mengajar yang berfokus pada pelibatan siswa secara aktif dan kreatif dalam proses pemerolehan hasil belajar. Penelitian ini dilakukan dengan tujuan untuk mengetahui pengaruh persepsi siswa tentang pembelajaran pendekatan keterampilan proses terhadap kemampuan koneksi matematis siswa dalam pengajaran matematika pada pokok bahasan Lingkaran. Jenis penelitian yang digunakan adalah eksperimen. Populasi dalam penelitian ini adalah seluruh siswa kelas VIII SMP Negeri 1 Wanaraja dan untuk sampel dipilih satu kelas yang diambil secara acak, yaitu kelas VIII-A. Dalam penelitian ini penulis menggunakan instrumen yang terdiri dari tes kemampuan koneksi berupa tes uraian (tes akhir yang sebelumnya di uji cobakan kepada siswa kelas 1X-A di SMP Negeri 1 Wanaraja dan angket. Analisis data dilakukan dengan korelasi Rank Sperman dan dilanjutkan dengan uji t,dari perhitungan diperoleh Ho ditolak, artinya Ha diterima sehingga terdapat pengaruh yang positif persepsi siswa tentang pembelajaran pendekatan keterampilan proses (PKP terhadap kemampuan koneksi matematis siswa. Sedangkan untuk analisis kemampuan koneksi matematis siswa secara keseluruhan berinterpretasi baik dan persepsi siswa terhadap pembelajaran matematika dengan Pendekatan Keterampilan Proses menunjukan interpretasi yang baik pula. Kata kunci: kemampuan koneksi matematis, pendekatan keterampilan proses, persepsi siswa, penelitian   eksperimen Mathematical connection

  11. Mekanisme Proses Pemanasan Air Di Dalam Boiler Dengan Mempergunakan Heater Tambahan Untuk Efisiensi Pembakaran

    OpenAIRE

    Helmon Sihombing

    2010-01-01

    Pada proses pemanasan air, air yang berasal dari raw water (air tanah) tidak langsung dibakar didalam boiler. dalam hal ini digunakan peralatan instrumen Deaerator dan economizer yang berfungsi untuk pemanasan awal sebelum dibakar didalam boiler. Fungsi deaerator dan economizer ini adalah sebagai komponen pembantu untuk memanaskan air sebelum dibakar didalam boiler. Apabila pemanasan air langsung dilakukan didalam boiler maka akan membutuhkan waktu yang cukup lama dan menggunakan bahan b...

  12. PROSES PRODUKSI BIOETANOL DARI LIMBAH CAIR GULA DALAM KAITANNYA DENGAN POTENSI SEBAGAI BAHAN BAKAR DALAM PERSPEKTIF LIFE CYCLE INVENTORY ASSESSMENT

    Directory of Open Access Journals (Sweden)

    Agusta Samodra Putra

    2013-11-01

    Full Text Available Life cycle inventory assessment merupakan salah satu tahapan di dalam Life Cycle Assessment (LCA yang bisa digunakan untuk menggambarkan interaksi materi dan energi di dalam suatu proses produksi bioetanol. Studi kasus dilakukan di pabrik gula kawasan Subang dan pabrik bioetanol di kawasan Palimanan yang merupakan pabrik gula dan bioetanol terbesar di Jawa Barat. Inventory yang dilakukan adalah pada bagian perkebunan tebu, pabrikasi tebu menjadi gula, transportasi dari pabrik gula menuju ke pabrik bioetanol, dan pabrikasi etanol. Luas lahan kebun tebu yang dimiliki oleh pabrik gula di Subang adalah seluas 5000 hektar. Dari bahan baku tebu 3000 ton/hari dihasilkan molase sebanyak 60 ton/hari, sisanya menjadi gula dan ampas tebu. Pada inventory kali ini selain dari sisi proses juga dilakukan inventory pada sisi transportasi.

  13. PENJADWALAN PRODUKSI IKS-FILLER PADA PROSES GROUND CALCIUM CARBONATE MENGGUNAKAN METODE MPS DI PERUSAHAAN KERTAS

    Directory of Open Access Journals (Sweden)

    Supriyadi Supriyadi

    2016-06-01

    Full Text Available Persaingan industri kertas semakin ketat dengan banyaknya industri atau perusahaan yang bergerak dalam industri yang sama dalam bersaing mendapatkan dan mempertahankan pelanggan. Permasalahan yang terjadi saat ini di CaCO3 Section pada Perusahaan Kertas adalah belum tersedianya jadwal induk produksi (Master Production Schedule = MPS sebagai dasar penentuan proses produksi IKS-Filler yang menyebabkan kekurangan persediaan sehingga kualitas kertas cacat dan perusahaan menderita kerugian yang cukup besar. Tujuan penelitian ini adalah menganalisa peramalan yang sesuai untuk diterapkan, merencanakan produksi dengan biaya terendah, penjadwalan produksi sebagai dasar proses produksi dan menghitung persediaan pengaman. Metode yang digunakan adalah peramalan (moving average, perencanaan produksi (level production plan, chase plant, dan intermediate plan, penjadwalan produksi (MPS trial and error dan menganalisis jumlah persediaan pengaman (safety stock menggunakan distribusi normal. Dari hasil pengolahan data menyimpulkan bahwa peramalan yang sesuai adalah Moving Average (n = 3 dengan nilai MAD terkecil dan tracking signal yang tidak menyimpang. Biaya terendah perencanaan produksi menggunakan metode intermediate plan sebesar 56,5 USD. Jadwal Induk Produksi mempunyai persediaan akhir 191 Ton dan rata-rata produksi tiap minggu sebesar 1,852 Ton. Jumlah persediaan pengaman dengan tingkat layanan 95% sebesar 101,75 Ton.

  14. Perceived Effectiveness of Identified Methods and Techniques Teachers Adopt in Prose Literature Lessons in some Secondary Schools in Owerri

    Directory of Open Access Journals (Sweden)

    F. O. Ezeokoli

    2016-07-01

    Full Text Available The study determined the methods adopted by teachers in prose literature-in-English classrooms, activities of teachers and students, teachers’ perceived effectiveness of techniques used. It also examined the objectives of teaching prose literature that teachers should address and the extent teachers believe in student-identified difficulties of studying prose literature. The study adopted the descriptive survey research design. Purposive sampling technique was used to select 85 schools in Owerri metropolis and in each school, all literature teachers of senior secondary I and II were involved. In all, 246 literature teachers participated out of which 15 were purposively selected for observation. The two instruments were: Teachers’ Questionnaire (r = 0.87 and Classroom Observation Schedule (r = 0.73. Data were analysed using frequency counts and percentages. Results revealed that teachers adopted lecture (28.4%, reading (10.9% and discussion (7.3% methods. Teacher’s activities during the lesson include: giving background information, summarizing, dictating notes, reading aloud and explaining and asking questions. The adopted techniques include: questioning, oral reading, silent reading and discussion. Teachers’ perceived questioning as the most effective technique followed by debating and summarizing. Teachers identified development of students’ critical faculties and analytical skills, literary appreciation and language skills to be of utmost concern. It was concluded that the methods adopted by teachers are not diverse enough to cater for the needs and backgrounds of students. Keywords: Methods, Techniques, Perceived Effectiveness, Objectives, Literature-in-English

  15. PENINGKATAN KEMAMPUAN BERPIKIR KRITIS DAN KETERAMPILAN PROSES SAINS SISWA SMA MELALUI IMPLEMENTASI PROBLEM BASED LEARNING DIPADU THINK PAIR SHARE

    Directory of Open Access Journals (Sweden)

    Abu Husen

    2017-06-01

    Full Text Available This study aims to implement of Problem Based Learning combined Think Pair Share in order to improve critical thinking and science process skills of students at XI IPA SMA. This research was classroom action research. The subjects were 28 students of classroom XI IPA 1 SMAN 1 Kasiman Bojonegoro 2016/2017. This research was conducted in two cycles. The research data consists of the learning realized by observation, the results of the critical thinking paper and pencil tests, and the science process skills by observation. Data were analyzed by descriptive qualitative technique. The results showed that the combined PBL and TPS learning model can improve the ability of critical thinking, and science process skills students of classroom XI IPA 1 SMAN 1 Kasiman Bojonegoro. Penelitian ini bertujuan untuk menerapkan Problem Based Learning dipadu Think Pair Share dalam rangka meningkatkan kemampuan berpikir kritis dan keterampilan proses sains siswa kelas XI IPA SMA. Penelitian ini merupakan penelitian tindakan kelas. Subjek penelitian adalah siswa kelas XI IPA 1 SMAN 1 Kasiman Bojonegoro tahun pelajaran 2016/2017 dengan jumlah 28 siswa. Penelitian dilaksanakan selama dua siklus. Data penelitian terdiri atas hasil observasi keterlaksanaan pembelajaran, hasil tes tulis kemampuan berpikir kritis, dan hasil observasi keterampilan proses sains. Data dianalisis secara deskriptif kualitatif. Hasil penelitian menunjukkan bahwa model pembelajaran PBL dipadu TPS dapat meningkatkan kemampuan berpikir kritis dan keterampilan proses sains siswa kelas XI IPA 1 SMAN 1 Kasiman Bojonegoro.

  16. The description of morality and manners in Vsevolod Solovyov’s short prose

    Directory of Open Access Journals (Sweden)

    Nikolsky Evgeny Vladimirovich

    2013-06-01

    Full Text Available This article contains a genre specificity of short prose by Vsevolod Solovyov, whose work is devoted to the Russian history between the 18th and 19th centuries. According to professor N.L. Vershinina, the author distinguishes the difference between the description of morality and manners. The main difference is in the presence of author’s point of view on the describing occurrences. In this case, such works are considered to be a kind of morality, which characterizes Solovyov’s works. Showing every-day life, he examined the process of turning barbarism into a civilizing society.

  17. ANALISIS KEPERCAYAAN-KEPERCAYAAN INDIVIDU DALAM MENGGUNAKAN TEKNOLOGI INFORMASI DALAM MENUNJANG PROSES BELAJAR MENGAJAR DI PERGURUAN TINGGI

    OpenAIRE

    Supardi Supardi; Eka Noor Asamara

    2017-01-01

    Penelitian ini bertujuan untuk mendiskusikan dan menguji secara empiris hubungan faktor sosial dengan cognitive absorption dan hubungannya terhadap faktor kepercayaan-kepercayaan (perceived ease of use dan perceived usefulness) dalam menggunakan teknologi informasi pada proses belajar mengajar diperguruan tinggi. Penelitian ini menggunakan sebanyak 125 dosen jurusan akuntansi di propinsi Yogyakarta sebagai responden. Faktor sosial diukur dengan menggunakan pengaruh rekan sejawat, cognitive ab...

  18. Analisis Domain Proses COBIT Framework 5 Pada Sistem Informasi Worksheet (Studi Kasus: Perguruan Tinggi STMIK, Politeknik Palcomtech

    Directory of Open Access Journals (Sweden)

    Fahmi Ajismanto

    2018-01-01

    Full Text Available Perguruan tinggi Stmik, PalComTech adalah lembaga pendidikan komputer dan internet yang berdiri sejak tahun 2003. PalComTech menggunakan Sistem belajar praktek, diskusi, pemecahan studi kasus, praktikum di laboratorium dan setiap pertemuan didukung dengan fasilitas komputer dan internet. Sistem Pembelajaran Worksheet merupakan sistem informasi akademik yang digunakan oleh STMIK Palcomtech Palembang dalam kegiatan belajar mengajar. Penelitian ini menentukan domain proses pada Control Objectives for Information and Related Technology (COBIT 5 dan Analisa Current Maturity Level, pengukuran tingkat kematangan tata kelola Worksheet. Metode yang digunakan yaitu, deskriptif, quantitative dan metode analisis mengunakan COBIT 5. Berdasarkan hasil dari penelitian ini ditemukan bahwa proses domain COBIT Framework versi 5 yang digunakan adalah: (1. EDM, (Evaluate, Direct And Monitor, (a EDM03, (b EDM04 sedangkan pada domain  (2. APO (Align Plan and Organise yaitu: (a. APO02, (b. APO04, (c. APO07, (d. APO11, (e. APO12, (f. APO13 dan pada domain (3. MEA (Monitor Evaluate and Assess yaitu: MEA01. Hasil dari Analisis Current Maturity Level adalah: (1. EDM03 : 4,23 berada pada level 4 - Managed and Measureable,(2. APO12 : 4,15 berada pada level 4 - Managed and Measureable,   (3. APO07 : 4,07 berada pada level 4 - Managed and Measureable, (4. MEA01 Memantau,: 3,96 berada pada level 4 - Managed and Measureable, (5. EDM04: 3,90 berada pada level 4 - Managed and Measureable, (6. APO11: 3,80 berada pada level 4 - Managed and Measureable, (7. APO02: 3,70 berada pada level 4 -  Managed and Measureable, (8. APO13 : 3,61 berada pada level 4 - Managed and Measureable, (9. APO04: 3,55 berada pada level 4 - Managed and Measureable.   Keywords : COBIT Fremework 5, Tata Kelola TI, Domain Proses, Worksheet

  19. Proses Penanganan Tata Kearsipan Daerah pada Kantor Perpustakaan Arsip dan Dokumentasi Deli Serdang

    Directory of Open Access Journals (Sweden)

    Lisnawati Lisnawati

    2014-06-01

    Full Text Available Kebutuhan manusia akan informasi begitu penting, beragamnya jenis media saluran informasi turut menambah kemudahan bagi siapa saja untuk mencari informasi tidak terkecuali bagi pemerintahan daerah sebagai penyelenggara pemerintahan memiliki peran penting untuk menyediakan sistem pengarsipan dalam mendukung kinerja. Tujuan penelitian ini untuk melihat bagaimanakah proses penanganan tata kearsipan daerah pada kantor perpustakaan arsip dan dokumentasi Kabupaten Deli Serdang. Metode penelitian yang digunakan adalah berjenis kualitatif dengan pendekatan deskriptif dimana pencarian data menggunakan data primer dan data skunder. Hasil penelitian memperlihatkan peralatan penyimpanan arsip masih mengunakan peralatan sederhana dan belum berbasis teknologi.

  20. Sensitivity Analysis of ProSEDS (Propulsive Small Expendable Deployer System) Data Communication System

    Science.gov (United States)

    Park, Nohpill; Reagan, Shawn; Franks, Greg; Jones, William G.

    1999-01-01

    This paper discusses analytical approaches to evaluating performance of Spacecraft On-Board Computing systems, thereby ultimately achieving a reliable spacecraft data communications systems. The sensitivity analysis approach of memory system on the ProSEDS (Propulsive Small Expendable Deployer System) as a part of its data communication system will be investigated. Also, general issues and possible approaches to reliable Spacecraft On-Board Interconnection Network and Processor Array will be shown. The performance issues of a spacecraft on-board computing systems such as sensitivity, throughput, delay and reliability will be introduced and discussed.

  1. PEMODELAN ARSITEKTUR ENTERPRISE MENGGUNAKAN TOGAF ADM UNTUK MENDUKUNG SISTEM INFORMASI PROSES AKADEMIK PADA UNIVERSITAS MUHAMMADIYAH PONOROGO

    Directory of Open Access Journals (Sweden)

    Hendrik Kusbandono

    2016-05-01

    Full Text Available Pengembangan EA di perguruan tinggi merupakan pekerjaan yang besar dan penuh dengan tantangan, salah satu tantangan tersebut adalah tuntutan manajemen dan stakeholder. Solusi dari masalah tersebut adalah pemodelan EA yang memandang elemen-elemen yang berbeda dalam suatu perguruan tinggi secara keseluruhan sebagai satu kesatuan. Penerapan EA bertujuan untuk menciptakan keselarasan antara bisnis dan TI bagi kebutuhan organisasi dan tidak bisa dilepaskan bagaimana organisasi tersebut membuat dan merencanakan enterprise. Penggunaan dan pemilihan framework EA yang tepat akan mempercepat danmenyederhanakan pengembangan arsitektur dalam pengembangan di masa depan sebagai respon terhadap kebutuhan bisnis. TOGAF ADM merupakan sebuah framework yang kompleks yang mampu memenuhi seluruh kebutuhan pengembangan EA, juga memiliki metode yang umum, menerima penggabungan dengan framework lain, sehingga dapat menghasilkan arsitektur yang spesifik terhadap kebutuhan organisasi. Pemodelan EA pada proses akademik di UMP menghasilkan blueprint arsitektur bisnis, data, aplikasi, dan teknologi. Dengan proses tahapan TOGAF ADM pada Fase Persiapan menghasilkan prinsip (bisnis, data, aplikasi, dan teknologi, pada Fase Visi Arsitektur menghasilkan visi arsitektur (bisnis, data, aplikasi, dan teknologi, pada Fase Arsitektur Bisnis menghasilkan blueprint arsitektur bisnis, pada Fase Arsitektur Sistem Informasi menghasilkan blueprint arsitektur sistem informasi berupa data dan aplikasi, sedangkan Fase Arsitektur Teknologi menghasilkan blueprint arsitektur teknologi.

  2. Aplikasi Informasi Restoran Berbasis Web Services di Kota Manado

    Directory of Open Access Journals (Sweden)

    Stenly Richard Pungus

    2016-09-01

    Full Text Available Teknologi web services adalah teknologi yang memungkinkan terbentuknya komunikasi antar dua atau lebih perangkat komputer yang memiliki lintas platform yang berbeda. Web services menggunakan teknologi XML dengan format SOAP dalam melakukan pertukaran informasi. Teknologi ini cocok untuk diintegrasikan di dalam proses bisnis, termasuk salah satunya adalah bisnis restoran khususnya restoran-restoran yang ada di kota Manado. Teknologi ini menjawab permasalahan yang dialami oleh para wisatawan yang datang berkunjung di kota Manado. Karena ketika mereka berkunjung di kota Manado, mereka kadangkala belum mengetahui informasi kuliner apa saja yang disajikan oleh restoran-restoran yang ada di kota Manado. Sehingga pada akhirnya dengan menggunakan teknologi ini, akan mempermudah wisatawan yang datang berkunjung di kota Manado dalam berkuliner. Penelitian ini bertujuan untuk mengimplementasikan teknologi JSON dan JAVA web services pada perangkat mobile Android sehingga dapat menjadi media informasi bagi wisatawan lokal  maupun wisatawan asing yang datang berkunjung di kota Manado dalam berkuliner. Penelitian ini didasarkan atas alur kerja metodologi penelitian Rational Unified Process (RUP yaitu metodologi penelitian yang bersifat parallel dalam setiap tahapan proses pembangunannya. Penelitian ini telah dilakukan dan menghasilkan sebuah aplikasi yang telah diuji. Aplikasi yang dibangun berhasil mengimplementasikan teknologi web services dari bahasa pemrograman Java dengan teknologi web services dari bahasa pemrograman PHP. Penggabungan kedua teknologi ini, menggabungkan informasi restoran-restoran yang ada di kota Manado untuk terintegrasi ke dalam sebuah aplikasi Android tanpa memandang apakah restoran terebut memiliki web services ataukah tidak. Apabila restoran tersebut tidak memiliki web services, mereka bisa menggunakan alternatif lain untuk memanfaatkan web services yang disediakan khusus bagi restoran-restoran yang tidak memiliki web services

  3. Delayed Release from Proactive Interference with Meaningful Material: How Much Do We Remember After Reading Brief Prose Passages?

    Science.gov (United States)

    Blumenthal, Gary B.; Robbins, Donald

    1977-01-01

    Three experiments were conducted, investigating the buildup of and the release from proactive interference, in which the stimulus materials were brief prose passages about specific topics. Each passage was followed by a multiple-choice test, and then a final test on all the passages read was given. Implications of the data for standardized tests…

  4. ANALISIS PENGARUH VARIASI SUHU dan WAKTU PADA PROSES HIDROLISIS TERHADAP KADAR GLUKOSA DALAM PEMANFAATAN Lemna minor SEBAGAI BIOETANOL

    Directory of Open Access Journals (Sweden)

    Vivi Mayangsari

    2014-10-01

    Full Text Available Energi terbarukan sangatlah diperlukan karena semakin meluasnya krisis energi sehingga memerlukan alternatif selain penggunaan bahan bakar fosil, penggunaan bioethanol merupakan alternatif yang baik karena banyak kelebihanya. Lemna minor merupakan salah satu tumbuhan yang berpotensi sebagai bioethanol, hal ini dapat dilihat dari kandungan glukosanya yang tinggi. Tujuan penelitian ini adalah untuk mengetahui hubungan waktu dan suhu pada proses hidrolisis terhadap nilai kadar glukosa serta mengetahui hubungan densitas terhadap kadar etanol. Proses ekstrasi glukosa menggunakan perbandingan volume HCl dengan kosentrasi 0,1 N, berat serbuk Lemna minor dan volume aquades yaitu 1:10:100 dengan variasi waktu ekstrasi 60, 90, dan 120 menit pada variasi suhu 60, 70, 80 °C dengan ukuran serbuk 60 mesh. Hasil penelitian ekstrasi hidrolisis terbaik pada menit ke-90 didapatkan panjang gelombang tertinggi 415 nm. Semua glukosa pada ekstrasi 90 menit difermentasi menggunakan bakteri Saccharomiches cerevisiae sebanyak 10% dari volume glukosa dengan waktu 144 jam, setelah fermentasi selesai sampel didestilasi untuk menghilangkan kadar air dan dihasilkan kadar ethanol terbaik 0,47% dengan densitas 0,9345 gr/ml3pada panjang gelombang larutan glukosa 316 nm.

  5. Eavan O’BRIEN. Women in the prose of María de Zayas

    OpenAIRE

    Costa Pascal, Anne-Gaëlle

    2016-01-01

    Después de haber publicado varios artículos sobre la prosa narrativa de María de Zayas (1590-1661), una de las más famosas escritoras del Siglo de Oro, la catedrática Eavan O’Brien, que trabaja actualmente en el departamento de Hispanic Studies en el famoso Trinity College de Dublin, nos ofrece una monografía escrita en inglés y titulada Women in the prose of María de Zayas. No es la primera vez que sale a la luz un trabajo sobre las diferentes figuras femeninas que aparecen en las dos colecc...

  6. Reflections of social relations in the language of Andrić's prose for children and young adults

    Directory of Open Access Journals (Sweden)

    Stakić Mirjana M.

    2017-01-01

    Full Text Available The paper examines the language of Andrić's prose on the example of his short stories 'Deca' (Children, 'Kula' (Tower, and 'Prozor' (Window written for children and young adults, interpreting social relations which represent their thematic, sociological, cultural, and historical context. We studied causes of social prejudices which represent the main cause of interpersonal and internal conflicts of the main protagonists in the context of learning sociological theories (sociocognitive theory, theory of social identity, and theory of social learning and from the standpoint of the psycholinguistic approach. We also observed language as a medium in discovering the internal and external characterization of protagonists achieved by means of verbalization of internal and external conflicts. We interpreted social relations and conflicts reflected in the language as an aesthetic, cultural, and social phenomenon as the conceptual framework of Andrić's prose. Literary language thus becomes a medium that achieves a cognitive role, in addition to its aesthetic role, discovering and illuminating social relations and conflicts which represent a reflexive core woven into the conceptual framework of the three short stories for children and young adults: 'Deca' (Children, 'Kula' (Tower, and 'Prozor' (Window.

  7. Alur Kerja Baru Simulasi Performa Bangunan Dalam Proses Desain Parametrik

    Directory of Open Access Journals (Sweden)

    Firza Utama Sjarifudin

    2010-12-01

    Full Text Available Makalah ini menjelaskan hubungan alur kerja baru antara program pemodelan CAD 3D (Rhino/Grasshopper dan simulasi pencahayaan dengan (Radiance/Daysim. Alur kerja perancangan yang sangat efektif dalam Rhino disajikan secara langsung dengan mengekspor geometri, material properties, dan sensor grid ke dalam format Radiance/Daysim untuk menghitung serangkaian indikator performa termasuk peta radiasi matahari serta faktor pendistribusian pencahayaan dalam setahun. Hasil simulasi secara otomatis dikirim kembali ke dalam Rhino menggunakan pemetaan warna. Dengan menggunakan Grasshopper, parameter desain utama seperti ukuran jendela dan deskripsi material dapat diubah secara bertahap dan hasil simulasi dapat dikombinasikan menjadi sebuah simulasi performa bangunan dalam bentuk animasi transformasi parametrik. Desain alur kerja ini telah secara khusus dikembangkan bagi proses perancangan arsitektur dengan menyediakan semua feedback yang sangat berguna bagi perancang secara interaktif dari tahap rancangan skematis sampai tahap pengembangan perancangan. 

  8. ANALISIS KEPERCAYAAN-KEPERCAYAAN INDIVIDU DALAM MENGGUNAKAN TEKNOLOGI INFORMASI DALAM MENUNJANG PROSES BELAJAR MENGAJAR DI PERGURUAN TINGGI

    Directory of Open Access Journals (Sweden)

    Supardi Supardi

    2017-04-01

    Full Text Available Penelitian ini bertujuan untuk mendiskusikan dan menguji secara empiris hubungan faktor sosial dengan cognitive absorption dan hubungannya terhadap faktor kepercayaan-kepercayaan (perceived ease of use dan perceived usefulness dalam menggunakan teknologi informasi pada proses belajar mengajar diperguruan tinggi. Penelitian ini menggunakan sebanyak 125 dosen jurusan akuntansi di propinsi Yogyakarta sebagai responden. Faktor sosial diukur dengan menggunakan pengaruh rekan sejawat, cognitive absorption diukur dengan menggunakan lima dimensi yaitu temporal dissociation, focused immertion, heightened enjoyment, control, dan curiosity serta kepercayaan-kepercayaan diukur dengan menggunakan perceived ease of use dan perceived usefulness. Metode pengambilan sampel yang digunakan dalam penelitian ini adalah secara non-probability yaitu purposive sampling dengan tipe judgment. Data dianalisis dengan structural equation modeling (SEM menggunakan SmartPLS2.0. Dari hasil pengujian hipotesis, diperoleh temuan bahwa seluruh hipotesis terdukung. Hal ini ditunjukkan dengan adanya bukti hubungan secara positif signifikan antara faktor sosial dengan cognitive absorption dan cognitive absorption dengan faktor kepercayaan-kepercayaan dalam menggunakan teknologi informasi. Penelitian ini telah membuktikan adanya pengaruh faktor sosial terhadap cognitive absorption dalam kepercayaan-kepercayaan menggunakan teknologi infomarmasi untuk mendukung proses belajar mengajar. Selain itu, penelitian ini telah berhasil mengembangkan model penelitian yang dilakaukan oleh Agarwal dan Karahanna (2000, yaitu dengan memberikan bukti empiris faktor sosial sebagai anteseden bagi cognitive absorption

  9. Evaluasi Tingkat Kematangan Proses Pengelolaan Data Pada Sistem Informasi E-Learning SMKN 1 Jenangan Menggunakan Cobit Quickstart

    Directory of Open Access Journals (Sweden)

    Dwiyono Ariyadi

    2016-05-01

    Full Text Available SMKN 1 Jenangan telah mengadopsi TI sebagai sarana pendukung kegiatan pendidikan, salah satunya adalah e-learning sebagai sarana penunjang kegiatan pembelajaran. Pengelolaan manajemen data e-learning ini merupakan hal penting karena data sangat diperlukan dalam administrasi harian guru bahkan juga untuk keperluan administrasi akreditasi. Saat ini pengelolaan manajemen data masih belum optimal, hal ini terlihat guru sering kehilangan data e-learning-nya saat terjadi perbaikan sistem. Backupan data belum dilakukan oleh sebagian besar guru sebagai pengguna e-learning. Perlu adanya suatu perencanaan tata kelola TI yang diharapkan dapat menjadi dasar dalam pengelolaan sistem e-learning di sekolah tersebut, sehingga e-learning ini bisa berjalan optimal sesuai yang diharapkan. COBIT merupakan framework yang bisa digunakan untuk menyusun Tata kelola TI maupun melaksanakan audit TI yang telah diakui secara internasional. Versi yang sederhana adalah COBIT Quickstart. Penelitian ini menggunakan model tingkat kematangan yang bertujuan untuk memperoleh data kondisi aktual pada domain DS 11(mengelola data dengan mempertimbangkan nilai indek kematangan (maturity index pada 6 atribut kematangan yaitu: Awareness and Communication (AC, Policies, Standards and Procedures (PSP, Tools and Automation (TA, Skill and Expertise (SE. Responsibilities and Accountabilities (RA, Goal Setting and Measurement (GSM. Kondisi saat ini (as-is terdapat tiga atribut berada pada level 1(inisialisasi, yaitu atribut RA, GSM dan AC, sedangkan lainnya sudah berada pada level dua(dapat diulang. Ini tergambar dengan kondisi sebagai berikut : peran dan tanggungjawab dalam manajemen data server belum ada kejelasan, kegiatan pengawasan terkait keamanan, backup data serta penghapusan data belum dilaksanankan, serta kesadaran terkait proses DS 11 baru sebagian pengguna SI yang peduli. Rekomendasi tindakan perbaikan merupakan proses perbaikan secara alamiah, serta merupakan proses pembelajaran

  10. UPAYA PENINGKATAN KUALITAS PADA PEMBUATAN RODA CASTOR 5” MENGGUNAKAN METODE SIX SIGMA DAN PENGENDALIAN PROSES STATISTIK (Studi Kasus Di Unit Komponen Plastik PT. Mega Andalan Kalasan

    Directory of Open Access Journals (Sweden)

    Naniek Utami Handayani

    2012-02-01

    Full Text Available PT. Mega Andalan Kalasan (MAK merupakan industri manufaktur yang menghasilkan peralatan rumah sakit dari logam. Dalam penelitian ini, studi kasus dilakukan pada Unit Komponen Plastik yang salah satu hasil produknya adalah roda castor 5”. Keluhan yang sering terjadi adalah adanya kerusakan pada bagian roda, terutama bagian wheel out roda. Hal ini disebabkan adanya rongga udara antara komponen wheel out dengan wheel in yang dapat menyebabkan pecah/terpisahnya bagian wheel out dengan wheel in. Untuk mengetahui ada tidaknya rongga, cara yang dapat dilakukan selama ini adalah membelah roda sehingga dapat terlihat bagian dalamnya (uji merusak. Cara ini tentu saja sulit dan tidak ekonomis. Pihak perusahaan pun memutuskan untuk mengganti material yang selama ini digunakan (Haibam dengan material lain (TPU yang memiliki sifat bahan lebih baik. Hal ini mampu mengurangi keluhan yang terjadi akibat cacat yang terjadi ketika masih menggunakan material haibam. Akan tetapi, penggantian bahan tidak serta merta menyelesaikan permasalahan, hal ini dapat dilihat dengan muncunya permasalahan baru berkaitan dengan proses produksinya. Penelitian ini dilakukan untuk meminimalkan cacat yang terjadi pada proses pembuatan roda castor 5” dan difokuskan pada cacat wheel out Castor 5”. Hasil identifikasi terhadap bahan haibam dan TPU menunjukkan bahwa sink mark merupakan cacat dominan. Pengolahan data dengan menggunakan metode DPMO menghasilkan tingkat sigma yang berbeda. Dari kedua tingkat sigma yang dihasilkan tersebut terlihat bahwa Tingkat Sigma Haibam > TPU (3,0 Sigma > 2,8 Sigma. Hal ini menunjukkan terjadinya penurunan kemampuan proses ketika proses produksi castor diganti bahan bakunya dari Haibam menjadi TPU. Kata kunci : Wheel in, Wheel out, Haibam, TPU, DPMO, SPC, Ttngkat Sigma

  11. PROSES PEMBELAJARAN BERBASIS METODE MONTESSORI DALAM MENGEMBANGKAN KETERAMPILAN SOSIAL ANAK USIA DINI (Penelitian Deskriptif Di PAUD Assya’idiyah Kab. Bandung Barat

    Directory of Open Access Journals (Sweden)

    Agus Sumitra

    2018-01-01

    Full Text Available Pada penelitian ini, penulis mengidentifikasi masalah sebagai berikut: 1. Perencanaan pembelajaran, pengembangan dan proses kegiatan pembelajaran belum mengacu betul terhadap tahap-tahap perkembangan anak, 2. Keterampilan sosial belum tertampilkan secara optimal mengingat sarana dan prasarana yang menunjang pengembangan keterampilan sosial belum memadai, 3. Pembelajaran anak usia dini masih terfokus pada peningkatan kemampuan akademik (hapalan dan calistung, 4. Rasa egois pada diri anak masih tinggi disebabkan cakrawala sosial anak terbatas dirumah, peserta didik seringkali memikirkan diri sendiri. Kemudian penulis merumuskan masalah sebagai berikut: Bagaimana proses pembelajaran metode montessori terhadap keterampilan sosial anak?Berdasarkan pada rumusan masalah di atas, tujuan yang ingin dicapai dalam penelitian ini adalah : 1. Rencana pembelajaran dengan metode montessori dalam upaya meningkatkan keterampilan sosial anak usia dini dengan bermacam aktifitas di PAUD, 2. Pelaksanaan pembelajaran dengan menggunakan metode montessori dalam mengembangkan keterampilan sosial anak usia dini, 3. Evaluasi proses pembelajaran dengan menggunakan metode montessori untuk meningkatkan keterampilan sosiak anak usia dini, 4. Untuk mengembangkan keterampilan sosial anak yang tertampilkan sebagai hasil pembelajaran dengan menggunakan metode montessori pada anak usia dini.Metode yang digunakan oleh penulis dalam penelitian ini adalah metode penelitian deskriptif dengan pendekatan kualitatif untuk mengetahui seberapa besar proses pembelajaran peserta didik dengan menggunakan metode montessori dalam mengembangkan keterampilan sosial anak. Data diperoleh dari hasil observasi, wawancara dan studi dokumentasi terhadap sumber data, objek penelitian yaitu PAUD Assya’idiyah, Kecamatan. Cipongkor, Kabupaten. Bandung Barat.Dari hasil penganalisisan data di peroleh sebagai berikut: 1. Perencanaan pembelajaran di PAUD Assya’idiyah sesuai dengan metode Montessori dimulai

  12. Faktor - Faktor Keberhasilan Proses Virtualisasi Dalam Perspektif E-Commerce Di Indonesia

    Directory of Open Access Journals (Sweden)

    Mohammad Rustam Sandegi

    2017-05-01

    Full Text Available Perkembangan dunia IT di Indonesia yang semakin pesat sehingga semakin menggantikan berbagai kegiatan yang dilakukan secara tradisional mulai perlahan berpindah ke arah virtual, termasuk salah satunya adalah di bidang perdagangan yang sekarang dikenal dengan e-commerce, perkembangan dan animo masyarakat dalam menggunakan e-commerce bisa dilihat dari mulai banyaknya perusahaan besar baik lokal maupun internasional berusaha masuk dan menguasai pasar online di Indonesia, kucuran dana yang tidak sedikit kerap kali diberitakan oleh media nasional untuk perusahaan-perusahaan e-commerce tanah air. Tentu dengan harapan dapat menguasai atau minimal bertahan di persaingan bisnis e-commerce di Indonesia, untuk itu harus memperhatikan beberapa faktor apa saja mengapa orang memiliki minat untuk melakukan transaksi online. Hasil dari penelitian ini memberikan model keberhasilan proses virtualisasi dilihat dari perspektif e-commerce dengan memperhatikan minat belanja online.

  13. Perancangan SCADA Software dengan Wonderware InTouch Recipe Manager dan SQL Access Manager pada Simulator Proses Pencampuran Bahan

    OpenAIRE

    Wicaksono, Handy; Lim, Resmana; Sutanto, William

    2008-01-01

    In Bahasa Indonesia: Banyak industri yang sudah menggunakan sistem automasi dengan menggunakan PLC (Programmable Logic Controller) dan SCADA (Supervisory Control And Data Acquisition). Salah satu software untuk membuat program SCADA adalah Wonderware InTouch. Untuk mengelola data dalam bentuk recipe dan database, Wonderware InTouch mempunyai program-program tambahan yaitu Recipe Manager dan SQL Access Manager. Pada penelitian ini, akan digunakan proses pembuatan kertas sebagai contoh kas...

  14. Kajian Proses Pembuatan Perhiasan Perak Cara Manual dan Masinal

    Directory of Open Access Journals (Sweden)

    Joni Setiawan

    2016-04-01

    Full Text Available Perhiasan dapat dibuat dengan 2 cara yaitu manual dan masinal. Masing-masing cara mempunyai kekurangan dan kelebihan. Oleh karena itu perlu adanya kajian dari dua cara tersebut sehingga bisa mengetahui cara apa yang lebih optimal dalam memproduksi perhiasan. Dalam kajian ini perhiasan yang dibuat adalah cincin dengan bahan perak 100 gram dan dicampur dengan tembaga 5 gram dengan 2 (dua model yaitu model A (cincin motif polos dan model B (cincin motif parang.Metode yang dipakai adalah dengan membandingkan hasil produk dari dua cara tersebut. Parameter yang dibandingkan adalah kualitas, waktu dan biaya dari produk tersebut.Hasil kajian menunjukkan bahwa kadar produk rata-rata dengan cara masinal lebih tlnggi 1,25%dibanding cara manual, dimensi produk rata-rata dengan cara masinal lebih presisi dibanding cara manual. Waktu proses rata-rata dengan cara masinal lebih cepat 97% dibanding cara manual dan biaya produksi cara masinal lebih rendah 63% dibanding cara manual.Dengan melihat hasil kajian tersebut maka dapat disimpulkan bahwa cara masinal lebih efisien dan efektif dibanding cara manual.

  15. Analisa Pengaruh Penambahan Kapasitor Terhadap Proses Pengisian Baterai Wahana Bawah Laut

    Directory of Open Access Journals (Sweden)

    Muhammad Muhammad Chanif

    2014-03-01

    Full Text Available Potensi wisata bawah laut Indonesia banyak yang belum dikembangkan, hanya Pulau Bali yang sudah memanfaatkannya dengan membuat wahana bawah laut yang berpenggerak motor DC yang listriknya disuplai oleh baterai. Setiap satu jam pelayanan berupa penyelaman, wahana bawah laut ini melakukan pengisian baterai sekaligus muat penumpang. Agar terdapat nilai ekonomis dan efektivitas selama proses itu di pelabuhan, dalam skripsi ini akan diuraikan mengenai pengaruh kapasitor untuk menambah muatan baterai charger, sehingga arus yang masuk bisa bertambah. Dalam rangkaian baterai charger yang telah dimodifikasi jumlah kapasitor menjadi 3 buah, nilai arus yang keluar sebesar 18 Ah dan tegangan yang keluar adalah tegangan input ditambah 4 V. Perbandingan rangkaian baterai charger yang termodifikasi penambahan kapasitor mampu mempercepat 1.44 kali dibanding dengan rangkaian sederhana. Selain itu, penambahan kapasitor bank juga mampu memberikan penghematan daya sebesar 22 % dengan menambahkan kapasitor berkapasitas 0.00519 Farad.

  16. LA PHOTOGRAPHIE ET LE CORPS DANS LA PROSE DE MIRCEA NEDELCIU

    Directory of Open Access Journals (Sweden)

    Iuliana MIU

    2015-11-01

    Full Text Available The article p roposes an interpretation of Mircea Nedelciu's work according to the techniques used in his writing and to the cultural predispositions adapted for the time he created. Beside the influences and the interferences between literature and cinematography, ther e is specific interest regarding the reader 's role or the ideal representation of reality; the prose of Mircea Nedelciu contains a sum of reflexions about body and writing. Same as Gheorghe Crăciun, the author of The Somotographic Pact , Nedelciu finds in his photographies a way of catching the present, the sense of reality and palpable in literature. Either he describes the photographic process, or he stops in front of some plastic backgrounds, all of these images cause the writer changes of physiological behavior or of opinion regarding time, perception and object.

  17. PROSES BERPIKIR SISWA TUNANETRA DALAM MENYELESAIKAN MASALAH MATEMATIKA DITINJAU DARI TEORI PEMROSESAN INFORMASI

    Directory of Open Access Journals (Sweden)

    Indah Syafitri T

    2016-07-01

    Penelitian ini merupakan penelitian kualitatif dan bertempat di UPT SMPLBN Kota Pasuruan. Subjek dalam penelitian ini merupakan seorang siswa tunanetra dari kelas IX tahun ajaran 2015/2016. Hasil penelitian menunjukkan bahwa proses berpikir siswa tunanetra dimulai dari adanya stimulus, stimulus berupa soal masuk ke dalam sensory register siswa tunanetra melalui indra perabaan dan indra pendengaran, kemudian memasuki short-term memory setelah sebelumnya melalui tahap selective attention dan perception, dalam short-term memory informasi lama berupa konsep-konsep yang dibutuhkan dalam menyelesaikan masalah dipanggil dari long-term memory (retrieval, ketika informasi meninggalkan short-term memory, ada dua kemungkinan yang terjadi yaitu informasi akan menuju ke long-term memory (encoding dan atau akan diteruskan menuju lingkungan berupa respon/jawaban siswa.

  18. AKUMULASI TIMBAL (PB DAN STRUKTUR STOMATA DAUN PURING (CODIAEUM VARIEGATUM LAM. BLUME

    Directory of Open Access Journals (Sweden)

    Susi Sulistiana

    2016-12-01

    Full Text Available Tanaman mempunyai kemampuan untuk mengatasi atau mengeliminir pencemaran udara yang terjadi di kota, salah satunya adalah tanaman puring. Stomata adalah salah satu organ tumbuhan yang digunakan untuk berinteraksi dengan lingkungannya. Fungsi utama stomata adalah sebagai tempat pertukaran gas, seperti CO2 yang diperlukan oleh tumbuhan dalam proses fotosintesis. Namun, stomata juga bertindak sebagai salah satu jalur masuknya polutan khususnya polutan yang berasal dari udara. Untuk mempertegas pengaruh akumulasi timbal terhadap daun tanaman puring secara morfologi yang telah dilakukan oleh Sulistiana dan Setijorini tahun 2014, perlu dilakukan penelitian lanjutan dengan melakukan pengamatan anatomi daun terutama struktur stomata daun tanaman puring. Penelitian bertujuan membandingkan struktur stomata antar kultivar puring dan membuktikan adanya hubungan antara akumulasi timbal (Pb dengan struktur stomata daun dari beberapa kultivar puring. Bahan penelitian yang digunakan adalah daun segar dari 13 kultivar tanaman puring yang ditanam di Perumahan Batan Indah, Kecamatan Kademangan, Tangerang Selatan. Pengamatan struktur stomata daun dilakukan dengan cara pembuatan preparat paradermal Parameter yang diamati dalam penelitian meliputi jumlah stomata, jumlah sel epidermis, panjang stomata, lebar stomata, indeks stomata, dan kerapatan stomata. Hasil yang diperoleh adanya korelasi positif antara kadar Pb dan struktur stomata daun kultivar puring melalui parameter-paramater yang diamati terutama jumlah stomata, lebar stomata, indeks stomata, dan kerapatan stomata.

  19. FAKTOR-FAKTOR YANG MEMENGARUHI RESISTENSI PEMBELIAN PANGAN ORGANIK DAN PROSES PENDIDIKAN KONSUMEN

    Directory of Open Access Journals (Sweden)

    Fety Nurlia Muzayanah

    2015-11-01

    Full Text Available Organic food market share in Indonesian only 0,5–2% from all agricultural products. There are problems in organic food marketing in Indonesia such as consumer confidence and limited information about organics food. This research aimed to analyze correlation of gender, occupation, age and education in intention to purchase organic foods, factors influencing purchase resistance of organic foods, and the pendidikan konsumen process. This research was involved 150 respondents. Data was collected using questionnaire survey. The result showed that gender, occupation, age and education not correlate with purchase intention of organic foods. Result from Structural Equation Modeling (SEM showed that factors caused purchase resistance was negative attitude toward organic foods, unaffordability of organic foods, and lack of awareness in organic foods but subjective norm don’t have significant correlation with purchase intention. Market Education process that can do is educate consumers about health benefits of organic food, organics certification and economics value of organic food.Keywords: consumer behavior, market education, organic foods,  SEMABSTRAKPangsa pasar pangan organik di Indonesia baru mencapai 0,5-2 persen dari keseluruhan produk pertanian. Beberapa kendala pemasaran pangan organik di Indonesia seperti consumer confidence dan terbatasnya informasi mengenai produk organik. Tujuan penelitian ini adalah menganalisis hubungan gender, pekerjaan, usia, dan pendidikan terakhir terhadap minat beli pangan organik, mengidentifikasi faktor-faktor yang memengaruhi resistensi pembelian pangan organik, dan mengidentifikasi proses pendidikan konsumen. Penelitian ini melibatkan 150 responden. Responden terdiri dari dosen, staf kependidikan, dan mahasiswa yang dipilih dengan teknik purposive sampling. Pengumpulan data dilakukan dengan menggunakan kuesioner. Hasil analisis menunjukkan tidak ada hubungan antara gender, pekerjaan, usia, dan pendidikan

  20. Mirrors in Russian Decadent and Symbolist Prose: Valery Briusov and Dmitry Merezhkovsky

    Directory of Open Access Journals (Sweden)

    Kirsten Lodge

    2010-06-01

    Full Text Available Examining mirror imagery in the prose works “In the Mirror” by Valery Briusov and The Resurrected Gods: Leonardo da Vinci by Dmitry Merezhkovsky, both published in 1902, this article situates the Russian Decadent and Symbolist associations of the mirror in the pan-European literary and philosophical context. The mirror constitutes the threshold of manifold oppositions, including life and art, life and death, and reality and dream or imagination. It is a realm of alternative reality, magical and seductive, as in Briusov’s story, or potentially both demonic and divine, as in Merezhkovsky’s novel. In accordance with the Romantic tradition as well as Decadent and Symbolist iconography, mirror imagery in these two works is inseparable from questions of the nature of art and the power of artistic creation.

  1. PENGGUNAAN FMEA DALAM MENGIDENTIFIKASI RESIKO KEGAGALAN PROSES PRODUKSI SARUNG ATM (ALAT TENUN MESIN (STUDI KASUS PT. ASAPUTEX JAYA TEGAL

    Directory of Open Access Journals (Sweden)

    Nia Budi Puspitasari

    2014-05-01

    Full Text Available Pengendalian kualitas merupakan salah satu hal yang penting untuk mempertahankan reputasi perusahaan di mata konsumen. PT. Asaputex Jaya adalah perusahaan textil yang bergerak dalam bidang sarung tenun.  Pada saat ini cacat produk yang terjadi pada perusahaan masih ada yang diluar dari ketentuan batas perusahaan yaitu diatas angka persentase yang telah ditetapkan oleh perusahaan yaitu sebesar 2%. Sehingga perusahaan segera melakukan perbaikan agar tidak terjadi waste yang merugikan perusahaan. Dengan adanya pengendalian kualitas secara baik dan benar, maka akan diperoleh produk yang dapat memenuhi keinginan konsumen. Salah satu tool yang digunakan untuk membantu pengendalian kualitas adalah menggunakan metode Failure Modes and Effects Analysis (FMEA. Penggunaan FMEA mampu mengidentifikasi resiko kegagalan yang terjadi selama proses produksi pada pembuatan sarung tenun. Tujuan penelitian ini adalah menganalisa moda kegagalan yang menyebabkan cacat produk dengan menggunakan metode FMEA, mendapatkan resiko kegagalan proses produksi terbesar dalam nilai RPN (Risk Priority Number, memberikan usulan perbaikan untuk produksi selanjutnya.  Berdasarkan pengolahan dengan metode FMEA dapat mengidentifikasi moda kegagalan yang terjadi pada proses pembuatan sarung tenun. Moda kegagalan potensial pada proses pembuatan sarung tenun dengan alat tenun mesin (ATM pada PT. Asaputex Jaya terdiri dari 14 jenis kegagalan. Kata Kunci : kualitas; alat tenun mesin; failure mode and effect analysis; risk priority number Abstract Quality control is one of the things that are important to maintain the company's reputation in the eyes of consumers. PT. Asaputex Jaya is a company engaged in the field of textile woven sarongs. At this time the product defect that occurs in companies that still exist outside the corporate limits of the provisions of the above percentage figures set by the company which is 2%. So the company immediately repairs to prevent harmful waste. With

  2. PENGARUH ORIENTASI OBJEK PADA PROSES 3D PRINTING BAHAN POLYMER PLA DAN ABS TERHADAP KEKUATAN TARIK DAN KETELITIAN DIMENSI PRODUK

    Directory of Open Access Journals (Sweden)

    Sobron Lubis

    2016-02-01

    Full Text Available Penelitian ini dilaksanakan untuk mengetahui pengaruh posisi objek dalam pembuatan protipe cepat (rapid prototyping dengan menggunakan 3D printing untuk bahan polymer PLA dan ABS terhadap kekuatan tarik maupun ketelitian dimensi yang dihasilkan. Untuk  mencapai objektif penelitian ini dilakukan percobaan dengan membuat prototype spesimen ujitarik berdasarkan ASTM dengan menggunakan 3D printer. Produk yang dihasilkan dilakukan pengukuran dimensi untuk melihat akurasi peroduk melalui perubahan dua posisi variasi orientasi objek yakni secara vertikal dan horizontal. Setelah proses pengukuran dimensi, dilakukan pengujian tarik spesimen dengan menggunakan alat uji tarik. Dari eksperimen yang dilakukan diketahui bahwa posisi orientasi dan besar layer pada proses printing memberi efek terhadap kualitas permukaan, efisiensi waktu dan kekuatan dari benda. Produk material PLA dengan orientasi posisi objek horizontal memiliki kualitas dimensi yang paling baik. Jumlah kesalahan akurasi material ini tidak melebihi 1 mm pada setiap layer. Material ABS dengan posisi orientasi objek  vertikal dan tebal layer sebesar 0,10 mm menghasilkan kekuatan tegangan tarik yang terkecil sebesar 8,62 MPa dan material PLA dengan orientasi posisi objek horizontal dengan dan tebal layer sebesar 0,40 mm menghasilkan kekuatan tegangan tarik terbesar 35,57 MPa

  3. PENGARUH SERBUK U-Mo HASIL PROSES MEKANIK DAN HYDRIDE – DEHYDRIDE – GRINDING MILL TERHADAP KUALITAS PELAT ELEMEN BAKAR U-Mo/Al

    Directory of Open Access Journals (Sweden)

    Supardjo Supardjo

    2015-07-01

    Full Text Available PENGARUH SERBUK U-Mo HASIL PROSES MEKANIK DAN HYDRIDE – DEHYDRIDE – GRINDING MILL TERHADAP KUALITAS PELAT ELEMEN BAKAR U-Mo/Al. Penelitian bahan bakar U-7Mo/Al tipe pelat dilakukan dalam rangka pengembangan bahan bakar U3Si2/Al untuk mendapatkan bahan bakar baru yang memiliki densitas uranium lebih tinggi, stabil selama digunakan sebagai bahan bakar di dalam reaktor dan mudah dilakukan proses olah ulangnya. Lingkup penelitian meliputi pembuatan: paduan U-7Mo dengan teknik peleburan, pembuatan serbuk U-7Mo dengan dikikir dan hydride - dehydride - grinding mill, IEB U-7Mo/Al dengan teknik kompaksi pada tekanan 20 bar, dan PEB U-7Mo/Al dengan teknik pengerolan panas pada temperatur 425oC. Paduan U-7Mo hasil proses peleburan cukup homogen, berat jenis 16,34 g/cm3 dan bersifat ulet, kemudian dibuat menjadi serbuk dengan cara dikikir dan hydride - dehydride - grinding mill. Serbuk U-7Mo hasil proses kikir berbentuk pipih, kontaminan Fe cukup tinggi, sedangkan serbuk hasil proses hydride - dehydride - grinding mill, cenderung equiaxial dengan kontaminan yang rendah. Kedua jenis serbuk U-7Mo tersebut digunakan sebagai bahan baku pembuatan IEB U-7Mo/Al dan PEB U-7Mo/Al dengan densitas uranium 7 gU/cm3 dan diperoleh produk dengan kualitas yang hampir sama. Hasil uji IEB U-7Mo/Al berukuran 25 x 15 x 3,15±0,05 mm, tidak terdapat cacat/retak, distribusi U-7Mo di dalam matriks cukup homogen dan tidak terdapat pengelompokan/aglomerasi U-7Mo yang berdimensi >1 mm. PEB U-7Mo/Al hasil pengerolan dengan tebal akhir 1,45 mm, memiliki ketebalan meat rerata 0,60 mm dan tebal kelongsong 0,4 mm dan terdapat 1 titik pengukuran kelongsong dengan ketebalan 0,15 mm. Dengan membandingkan penggunaan kedua jenis serbuk U-7Mo tersebut, IEB U-7Mo/Al dan PEB U-7Mo/Al yang dihasilkan memiliki kualitas hampir sama. Namun demikian penggunaan serbuk U- 7Mo hasil proses hydride - dehydride - grinding mill lebih baik karena proses pengerjaannya lebih cepat dan impuritas dalam

  4. Tradittonal heritage of the Serbs from Kosovo and Metohija in the prose of Janićije Popović

    Directory of Open Access Journals (Sweden)

    Pitulić Valentina D.

    2013-01-01

    Full Text Available In his prose works, Janićije Popović presented the ethno-psychological heritage of the Serbs in Kosovo and Metohija under the Turkish rule. The author, born in Gračanica, was educated in Bitolj, where his teacher, Milan Gajić, was the first to notice his talent for writing. He recorded the social and historical situation in the Old Serbia, under the Turkish rule. His prose works cover the period between 1812 and 1912. In view of the constant Turkish oppression of the Serbian population in this territory and the so-called 'rayah mentality' which, according to Jovan Cvijić, was formed in these peculiar living conditions, the paper is concerned with the forms of the traditional heritage preserving the archetypal patterns of the ancestors. The writings of Janićije Popović depict the customs of the people from Kosovo, particularly the weddings, Family Saint's Day, folk gatherings, as well as architecture, style of clothing and other forms of everyday life. Janićije Popović provided valuable information on the life of the Serbs under the Turkish rule on the eve of the Balkan wars. The importance of the traditional heritage for preservation of the identity is particularly seen in the forms of collective consciousness which are the subject of our study.

  5. PENGARUH PARAMETER CUACA TERHADAP PROSES EVAPORASI PADA INTERVAL WAKTU YANG BERBEDA

    Directory of Open Access Journals (Sweden)

    Trinah Wati

    2016-03-01

    Full Text Available Evaluasi perbandingan, analisis korelasi dan regresi antara evaporasi panci dengan parameter cuaca dilakukan pada interval waktu harian, dasarian dan bulanan untuk mempelajari ketergantungan evaporasi panci terhadap parameter cuaca dan untuk menduga evaporasi panci menggunakan parameter cuaca di stasiun Darmaga Bogor, Semarang dan Karangploso. Variasi lima faktor utama yang mengendalikan proses evaporasi antara lain radiasi matahari (lama penyinaran, defisit tekanan uap air, kelembaban relative, kecepatan angin dan suhu udara telah dibandingkan dengan variasi evaporasi panci pada interval waktu harian, dasarian dan bulanan. Defisit tekanan uap air memiliki pengaruh dominan dengan evaporasi panci pada semua interval waktu di Darmaga dan Semarang, sedangkan di Karangploso pada interval waktu harian dan dasarian. Kecepatan angin juga memiliki pengaruh dominan dengan evaporasi panci di Karangploso pada interval waktu dasarian dan bulanan. Pemodelan evaporasi panci menggunakan parameter cuaca yang dominan berpengaruh terhadap proses evaporasi menghasilkan persamaan model yang cukup baik dengan nilai R2 > 0,50, berdasarkan validasi data model dengan observasi memiliki. secara keseluruhan kesalahan hasil validasi antara data model dengan data pengamatan kurang dari 12%.. Tren evaporasi panci di Darmaga menunjukkan peningkatan dengan koefisien determinansi > 0.5, sedangkan di Semarang dan Karangploso secara statistik belum mengalami kecenderungan perubahan evaporasi.   Comparative evaluation, correlation and regression analysis of pan evaporation with other meteorological variables at daily, 10-daily and monthly time-scales were conducted to learn the dependence of pan evaporation to other meteorological variables and to estimate pan evaporation using other meteorological variables at Darmaga Bogor station, Semarang and Karangploso. Five major factors that control evaporation were solar radiation (sunshine duration, vapour pressure deficit, relative

  6. Pemberdayaan Petani Lahan Gambut Melalui Proses Penjernihan Air Gambut

    Directory of Open Access Journals (Sweden)

    Tri Widiastuti

    2017-12-01

    Full Text Available Masyarakat di kawasan gambut umumnya mengandalkan air hujan untuk kebutuhan air bersih sehari-hari, akan tetapi ketersediaan air hujan menjadi terbatas pada musim kemarau, itu berarti tidak ada pilihan lain selain memanfaatkan air gambut yang mengalir di parit dilingkungan tempat tinggal mereka. Program KKN PPM bertujuan untuk memberdayakan petani melakukan penjernihan air gambut melalui program  alih teknologi dan pendampingan petani. Penjernihan air gambut menggunakan bahan - bahan  alami yang mudah didapatkan dilingkungan sekitar mereka, yaitu menggunakan kapur sirih, PAC dan Tawas sebagai koagulan penjernihan air dan juga menggunakan batu kerikil, pasir, arang dan ijuk sebagai filter pada proses penyaringan air. Sasaran utama adalah kelompok tani pengguna air gambut  anggota Gapoktan Sumber Bersama yang berada di kampung Kembang Wonosari, dusun Karya 1, desa Kuala Dua. Kegiatan KKN PPM  diselenggarakan selama 1bulan diikuti oleh 30 mahasiswa, Metode yang diterapkan adalah membuat  plot percontohan, penyuluhan, bersama Poktan membuat sumur resapan, instalasi dan demo penjernihan air gambut. Pada 6 lokasi yang berbeda telah berhasil didirikan 6 buah instalasi pengolahan air gambut dan 6 sumur resapan, Melalui kegiatan KKN-PPM ini para petani telah dapat melakukan penjernihan air secara mandiri dan dapat mengatasi kesulitan air bersih pada musim kemarau.   Kata kunci : air gambut, penjernihan, sumur

  7. ANALISA FAKTOR PENYEBAB KEGAGALAN MESIN GRINDER PADA PROSES PRODUKSI PLASTIC FILM DI PT. MUTIARA HEXAGON

    Directory of Open Access Journals (Sweden)

    Imam Hidayat

    2013-10-01

    Full Text Available Bila suatu mesin memiliki tingkat kegagalan yang tinggi, maka perlu dilakukan analisis mengenai  penyebab  –  penyebab  kegagalan  tersebut  hingga  ke  akar  permasalahannya sehingga dapat menentukan tindakan yang sesuai untuk meningkatkan kinerja suatu mesin. PT. Mutiara Hexagon merupakan sebuah perusahaan yang bergerak dibidang industri pembuatan plastik  kemasan.  Dalam  line  pembuatan lembaran film  diperlukan mesin  CPP  (Cast  Poly Propylene Machine dan mesin grinder dalam prosesnya. Pada penelitian yang dilakukan di PT. Mutiara Hexagon, terdapat beberapa kegagalan yang terjadi pada mesin grinder pada proses produksi plastic film, sehingga menyebabkan seluruh line pada divisi film mengalami downtime. Tujuan dari penelitian ini adalah untuk melakukan analisa mengenai faktor penyebab kegagalan mesin grinder, penulis melakukan observasi secara langsung dan melihat proses produksi plastic film.Penulis menggunakan metode Failure Effect and Mode Analysis (FMEA dan Fault Tree Analysis (FTA. Penerapan analisis Failure Effect and  Mode Analysis (FMEA dapat menentukan sejauh mana tingkat kegagalan terjadi. Dari hasil analisis FMEA kemudian dapat dilanjutkan dengan menggunakan Fault Tree Analysis (FTA guna mengetahui lebih lanjut penyebab-penyebab dasar suatu kegagalan.Dari hasil perhitungan nilai Risk Priority Number (RPN pada tiap-tiap kegagalan yang terjadi  diantaranya yang  paling  tinggi  adalah kegagalan mesin  grinder rusak  dengan nilai kegagalannya mencapai 120. Kemudian dianalisa penyebab kegagalan tersebut dengan menggunakan metode FTA di dapatkan minimal cut sets yaitu: as grinder patah, katup hisap blower terbuka terlalu besar, kegagalan pada motor blower, baut pada dudukan pisau patah, pisau tumpul dan human error. Berdasarkan nilai probabilitas masing-masing cut set didapatkan nilai probabilitas kegagalan grinder periode 1 Juni 2012 -1 Juni 2013 mencapai 60%.

  8. PEMANFAATAN KARBON AKTIF ARANG BATUBARA (KAAB UNTUK MENURUNKAN KADAR ION LOGAM BERAT Cu2+ DAN Ag+ PADA LIMBAH CAIR INDUSTRI

    Directory of Open Access Journals (Sweden)

    Kusmiyati Kusmiyati

    2012-05-01

    0.994 for Cu2+ metals ion and 0.984 for the Ag+ metals ion at acidic solution, whereas 0.986 for Cu2+ metals ion and 9.69 for the Ag+ metals ion at neutral pH. Kinetic model of second order rate describe the adsorption process well at acidic and neutral conditions. At the optimum conditions, the correlation coefficient (R2 of 0.998 for Cu2+ and 0.999 for the Ag+ at acidic solution, whereas 0.993 for Cu2+ and 9.998 for the Ag+ at neutral pH were obtained.  Limbah cair industri bisa mengandung ion logam berat seperti Cu2+ dan Ag+ yang berbahaya bagi lingkungan jika dibuang tanpa melalui pengolahan dahulu. Metode yang digunakan untuk mengurangi ion logam berat dalam limbah cair sudah banyak dilakukan, salah satu diantaranya adalah adsorpsi, yaitu memisahkan komponen tertentu dari fluida ke permukaan zat padat. Adsorpsi merupakan metode yang mudah, akan tetapi kebanyakan adsorben yang digunakan harganya mahal, sehingga perlu adanya alternatif adsorben yang murah. Penelitian ini memanfaatkan karbon aktif arang batubara (KAAB sebagai adsorbennya. Arang batubara merupakan limbah hasil pembakaran batubara pada industri, yang berpotensi untuk dikembangkan menjadi adsorben, sehingga dapat mengurangi pencemaran lingkungan. Pengaktifan arang batubara dilakukan dengan merendamnya dalam peroxide kemudian dilakukan pemanasan pada suhu 500°C. Penelitian ini bertujuan untuk mengetahui pengaruh parameter proses (konsentrasi, pH dan waktu proses terhadap persentase ion logam berat teradsorpsi dalam KAAB, mempelajari persamaan kesetimbangan adsorpsi dengan menggunakan model isoterm adsorpsi Langmuir dan Freundlich, dan menghitung konstanta kinetika adsorpsi dengan pendekatan model kinetika pseudo-first-order dan pseudo-second-order. Pelaksanaan penelitian dengan batch, yaitu mengkontakkan 10 gram KAAB dengan 400 ml limbah sintetis. Pengujian kadar ion logam berat menggunakan AAS (Atomic Absorption Spectrophotometer. Hasil penelitian menunjukkan bahwa KAAB dapat digunakan untuk

  9. Modern experimental prose through the prism of psychoanalytical theories

    Directory of Open Access Journals (Sweden)

    Lončar-Vujnović Mirjana N.

    2014-01-01

    Full Text Available The balance between the subjective and the objective perspectives in experimental prose must be accomplished in order to achieve the effect of intensive reflective and spiritual reality. Deleuze and Guattari take the method of William Burroughs and James Joyce as examples of the so- called 'butchered text method' which refers to the temporal-spatial perspective. Furthermore, they mention Nietzsche's interlocking of 'eternal return of the present as something that opinion does not know' and the theory of Stephen Mallarme, who combines well known, fragmented style with alchemical dream. According to him, the primary purpose of the modern text is to get closer to the reader so that any reader can interpret it in his own way. Trying to demystify scientific fantasy of objectivity, Lacan does not attribute impersonality and exteriority to art, but science and theory. According to him, a text without the influence of psychological factors, which make both life and characters more realistic, is not art. The connection between the external world and a man is expressed through a mirror, which Lacan tentatively calls 'imago'. Imago of the outside world or one's appearance is present in hallucinations or dreams, always reflecting the internal condition of the individual, its fragility (senility or its fair projection, thereby making this 'subjective-objective' relationship unbreakable.

  10. Proses dan Hasil Belajar pada Prakerind Bidang Keahlian Kendaraan Ringan: Studi Kasus pada Industri Pasangan SMKN 3 Yogyakarta

    Directory of Open Access Journals (Sweden)

    Yuneldi Miswardi

    2013-06-01

    Full Text Available Penelitian ini bertujuan untuk mengungkapkan proses belajar siswa SMKN 3 Yogyakarta kompetensi keahlian teknik kendaraan ringan di tempat kerja dalam pelaksanaan praktek kerja industri (pra-kerind. Penelitian ini menggunakan pendekatan kualitatif studi kasus. Subjek penelitian adalah empat manager/pihak DUDI yang mengelola pelaksanaan prakerind dan tujuh siswa yang terlibat dalam ke-giatan prakerind pada empat DUDI  tersebut. Pengumpulan data dilakukan dengan observasi dan wa-wancara. Teknik analisis data yang digunakan ialah metode Miles dan Huberman, melalui tahapan pengumpulan data, reduksi data, penyajian data, dan penarikan kesimpulan. Hasil penelitian adalah sebagai berikut. 1 Pengaturan belajar siswa di tempat kerja dengan membatasi jumlah siswa dalam pekerjaan dan menjadikan siswa sebagai helper mekanik. 2 Proses pembelajaran siswa di tempat kerja: (a belajar melalui pekerjaan dengan mengikuti mekanik; (b peran mekanik: memberikan ke-sempatan kepada siswa untuk melakukan pekerjaan secara langsung dengan bimbingan dan pengawas-an, memberikan penilaian terhadap kinerja siswa; (c cara siswa mendapatkan kompetensi di tempat kerja: (1 berkomunikasi dan bersosialisasi, (2 rajin dan ulet, (3 memiliki inisiatif dan aktif; (d pe-ngetahuan, keterampilan dan sikap yang diperoleh siswa di tempat kerja:  (1 pengetahuan tentang du-nia kerja bengkel otomotif  dan pengalaman kerja pada pekerjaan yang sesungguhnya, (2 kategori kompetensi siswa yang diperoleh dalam prakerind untuk kategori bengkel besar dan kecil adalah kate-gori specialist, sedangkan untuk kategori bengkel menengah masih dalam kategori orang yang belum berpengalaman, (3 sikap siswa sesuai dengan budaya kerja di DUDI yaitu kerja keras dan peduli mutu. Kata kunci: Pembelajaran di tempat kerja

  11. PENGEMBANGAN SOFT SKILLS MAHASISWA PROGRAM KELAS INTERNASIONAL MELALUI PEMBELAJARAN BERBASIS KONTEKS UNTUK MENINGKATKAN KUALITAS PROSES DAN HASIL BELAJAR MEKANIKA

    Directory of Open Access Journals (Sweden)

    D. Rosana

    2014-04-01

    Full Text Available Pengembangan soft skills bukanlah hal baru dalam bidang pendidikan, karena landasan untuk pengembangannya sudah sangat jelas, UU Nomor 20 Tahun 2003 Tentang Sistem Pendidikan Nasional, Bab I, Pasal 1 Ayat 1. Perlunya pengembangan soft skills di program kelas internasional terkait dengan permasalahan yang muncul di rintisan program kelas internasional yang sudah diselenggarakan di Jurusan Pendidikan Fisika FMIPA UNY.  Dari kelas rintisan  tersebut dapat teramati pada proses perkuliahan sering terlihat keraguan mahasiswa untuk terlibat aktif dalam perkuliahan. Selain karena kendala yang muncul akibat keterbatasan mahasiswa dalam menguasai percakapan bahasa Inggris, sehingga mereka memerlukan waktu lebih lama untuk menyimak isi perkuliahan,  tapi juga yang tampak menonjol adalah pengaruh dari kurang berkembangnya soft skills mahasiswa.Rancangan eksperimen yang digunakan dalam penelitian ini adalah Non Random Pre-tes Post-test Control Group. Dalam rancangan ini, pengambilan subyektidak dilakukan secara rambang. Rancangan ini dipilih karena selama eksperimentidak memungkinkan untuk mengubah kelas yang telah ada. Pra tes digunakan untukmenyetarakan pengetahuan awal kedua kelompok sedangkan post tes digunakan untukmengukur hasil belajar dan lembar observasi untuk mengetahui perkembangan soft skillsselama dan setelah proses belajar. Kegiatan belajar yang dilakukan dengan berbasis konteks, menyebabkan peserta didik aktif merumuskan pertanyaan, mencari sumber informasi dan mengumpulkan informasi dari sumber, mengolah informasi yang sudah dimiliki, merekonstruksi data/fakta/nilai, menyajikan hasil rekonstruksi/proses pengembangan nilai. Hal ini menumbuhkan soft skills pada diri mahasiswa melalui berbagai kegiatan belajar yang terjadi di kelas pembelajaran, lingkungan kampus, dan tugas-tugas di luar kampus. Pengembangan soft skills ini berpengaruh secara signifikan terhadap peningkatan hasil belajar mahasiswa baik secara proses maupun produk yang di

  12. PERAN KEPEMIMPINAN KONTAK TANI DALAM PROSES DIFUSI INOVASI TEKNOLOGI PENGELOLAAN TANAMAN DAN SUMBERDAYA TERPADU PADI

    Directory of Open Access Journals (Sweden)

    Pepi Rospina Pertiwi

    2013-03-01

    Full Text Available Farmers group is lead by a farmer leader that was expected to improve a dynamic of group activities. The farmer leader has significant role in ensuring the relationship between farmers in relation to the information sharing of the agricultural innovation. This study was aimed to examine the leadership role of the farmer leaders in the process of technology diffusion namely PTT Paddy, an innovation that was currently being introduced. An explanatory research design was chosen to describe the phenomenon of the leadership role of farmer leaders that was evaluated by other farmers. The research was conducted in the subdistrict Carenang, Serang, Banten. Forty participants in successfull farmer groups were selected to evaluate farmer leadership characteristics. The results showed that the farmer leaders have been helping the group to achieve goals, improving communication, increasing the motivation of the farmers, facilitating the farming infrastructure, and solving problems. The role of the farmer leaders as bridging agent in communication is categorized satisfactory. This role is effectively used in the process of the innovation dissemination of PTT Paddy to the farmers. Kelompok tani dipimpin oleh seorang kontak tani yang diharapkan dapat meningkatkan dinamika kegiatan kelompok. Kontak tani memiliki peran penting dalam memastikan hubungan antara petani dengan berbagi informasi mengenai inovasi pertanian. Penelitian ini bertujuan untuk meneliti peran kontak tani dalam proses difusi teknologi yaitu Pengelolaan Tanaman dan Sumberdaya Terpadu (PTT Padi, sebuah inovasi yang saat ini sedang diperkenalkan. Desain penelitian adalah eksplanatory research dipilih untuk menggambarkan fenomena peran kontak tani yang dievaluasi oleh petani lain. Penelitian dilakukan di Kecamatan Carenang, Serang, Banten. Empat puluh peserta dalam kelompok tani terpilih untuk mengevaluasi karakteristik kontak tani. Hasil penelitian menunjukkan bahwa kontak tani telah membantu

  13. An investigation of the effects of interference speech on short-term memory for verbally presented prose

    Science.gov (United States)

    Lodico, Dana M.; Torres, Rendell R.; Shimizu, Yasushi; Hunter, Claudia

    2004-05-01

    This study investigates the effects of interference speech and the built acoustical environment on human performance, and the possibility of designing spaces to architecturally meet the acoustical goals of office and classroom environments. The effects of room size, geometry, and acoustical parameters on human performance are studied through human subject testing. Three experiments are used to investigate the effects of distracting background speech on short-term memory for verbally presented prose under constrained laboratory conditions. Short-term memory performance is rated within four different acoustical spaces and five background noise levels, as well as a quiet condition. The presentation will cover research methods, results, and possibilities for furthering this research. [Work supported by the Program in Architectural Acoustics, School of Architecture, Rensselaer Polytechnic Institute.

  14. Perancangan dan Simulasi MRAC untui Proses Pengendalian Temperatur pada Continuous Stirred Tank Reactor (CSTR

    Directory of Open Access Journals (Sweden)

    Amelia Sylvia

    2014-03-01

    Full Text Available Temperatur merupakan salah satu variabel proses dasar yang dikendalikan untuk menjaga suhu cairan di dalam reaktor. Model Reference Adaptive Controller (MRAC dengan MIT rule dipilih untuk mencapai spesifikasi respon yang diinginkan pada CSTR. Beban yang bervariasi berupa debit aliran likuid yang masuk ke dalam reaktor dapat menyebabkan perubahan parameter yang mempengaruhi perubahan temperatur output produk pada CSTR. Sebuah simulasi dilakukan dengan menggunakan MATLAB dan hasilnya dianalisa. Respon plant dapat melakukan adaptasi parameter – parameter kontrolernya cukup baik pada nilai gain adaptasi dengan rentang 0.00000010000 sampai 0.00000000001. Waktu yang dibutuhkan untuk mengatasi beban yang bervariasi berupa debit aliran yang masuk ke dalam reaktor dengan nilai yang maksimal (1.5 m^3/min menghasilkan respon plant lebih cepat 42 detik dari pada debit aliran masuk dengan nilai yang nominal (1 m^3/min 63 detik dan minimal (0.5 m^3/min 75 detik.

  15. KENYAMANAN DAN KEPUASAN PASIEN DALAM PROSES INTERAKSI PELAYANAN KEPERAWATAN DI RSUD PETALA BUMI

    Directory of Open Access Journals (Sweden)

    Syafrisar Meri Agritubella

    2018-03-01

    Full Text Available The quality of service nursing influenced by satisfaction and comfort patients .2 of 6 indicators of quality is a cause of patients home force and did not choose the hospital treatment same time of need .This study aims to analyze comfort and satisfaction patients in the interaction nursing service hospital the 2016 petala year .The research is description analytic with samples were 123 patients who were hospitalized in installation .The analysis shows that the patients are in the elderly early ( 25,2 % , patients of the female sex ( 57,7 % , the senior secondary school / equivalent ( 68,3 % , of employment civil servants ( 43,9 % , the treatment to 1 - 2 ( 95,1 % , the third grade care ( 51,2 % , the majority of haripe 1-3 day care ( 73,2 % , payment methods patients in installation patient is bpjs ( 63,4 % , mostly located in a room a floor III ( 41,5 % , berda in the comfortable ( 52,03 % and most patients are in the satisfied ( 72,36 %. In the process interaction service nursing .Expected management hospitals can make the most of communication nurse through seminar activities and training related communication effective in interpersonal raising comfort and satisfaction patients Rendahnya mutu pelayanan keperawatan dipengaruhi oleh kepuasan pasien. Pelayanan keperawatan yang bermutu menjadi alasan pasien untuk menggunakan pelayanan kembali. Pelayanan dikatakan bermutu apabila pasien merasa nyaman dan menimbulkan kepuasan serta melebihi harapan pasien. Penelitian ini bertujuan untuk mendiskripsikan dan menganalisis kenyamanan dan kepuasan pasien dalam  proses interaksi  pelayanan keperawatan di RSUD Petala Bumi Tahun 2016. Jenis penelitian ini adalah deskripsi analitik dengan sampel berjumlah 123 pasien yang berada di Instalasi rawat inap. Hasil analisis menunjukkan bahwa pasien berada pada kelompok Lansia awal (25,2 %,  pasien jenis kelamin perempuan (57,7%, tingkat pendidikan SLTA / Sederajat  (68,3%,  Jenis Pekerjaan PNS(43,9 %,

  16. The Estimation Formation Alkaline In The Proses Desalination MSF

    International Nuclear Information System (INIS)

    Latiffah, Siti Nurul

    2000-01-01

    Already to go on estimation phenomena formation alkaline scale of a seawater. In desalination system seawater on MSF to go on scale by a thermal decomposition HCO sub.3- ion and hydrolysis carbonate ion with water on the temperature operation. The varieties alkaline scale in attached on tube surface, while reduced efficiency heat transfer and to raise corrosion attack to structure material is caused all this high cost. Estimation to take please which a sum step by step decomposition ion bicarbonate from then information scale which carbonate and hydroxyl ion. The various scale maximal is alkaline form is a calcium carbonate = 116,5 gram per meter cubic the various sedimentation is alkaline and magnesium hydroxide = 67,57 gram per meter cubic

  17. Prose Fiction as a Narrative Companion for a Vegetable Parenting Videogame.

    Science.gov (United States)

    Brand, Leah; Beltran, Alicia; Buday, Richard; O'Connor, Teresia; Hughes, Sheryl; Baranowski, Janice; Diep, Cassandra; Lu, Amy Shirong; Baranowski, Tom

    2015-08-01

    The purpose of this research is to explore the capacity of story to connect to a health-related videogame, as well as the qualities that may increase efficacy by making the story compelling. Parents of 3-5-year-old children often report difficulty getting their children to eat vegetables, which are protective against chronic illnesses. Videogames may be vehicles for training parenting practices for successful vegetable consumption outcomes but often rely on stories to provide context and details. Unfortunately, storytelling may interrupt immersion and player agency. Delivering stories outside of gameplay may provide an understanding of game situations while maintaining immersion. Two companion storylines (one a romantic adventure and the other a suspenseful fantasy) were generated for a vegetable parenting game, "Mommio," targeting mothers of preschool children. Mothers of 3-5-year-old children (n=18) read both storylines and completed semistructured interviews. Mothers preferred the romantic adventure, which featured strong characters, relatable issues, and an engaging plot. Most mothers were interested in playing the "Mommio" videogame after reading the stories. Results suggest that it is possible for prose literature to both motivate gameplay and be an immersive narrative companion to, but separate from, games for health. This literature should include engaging, realistic stories and relatable strong characters.

  18. Pola Proses Penyebaran dan Penerimaan Informasi Teknologi Kamera DSLR

    Directory of Open Access Journals (Sweden)

    Sidiq Setyawan

    2017-10-01

    Full Text Available Abstrak   Kamera DSLR sebagai sebuah produk inovasi memiliki cara tersendiri untuk dapat diterima dan diadopsi oleh sebuah sistem sosial khususnya fotografer non profesional di Kota Solo. Difusi inovasi menjelaskan secara sistematis bagaimana sebuah produk inovasi DSLR disebarluaskan dan diterima oleh golongan inovasi di dalamnya. Sebagai sebuah bentuk komunikasi khusus, dalam teori difusi inovasi terdapat dua pokok utama kajian komunikasi, yakni bagaimana seorang komunikator maupun komunikan dalam golongan inovasi bertindak untuk menyebarkan pesan dan menerima pesan. Kedua pokok bahasan ini yang menjadi kunci bagaimana sebuah produk inovasi mampu efektif disebarkan dan diterima (diadopsi oleh golongan inovasi di dalamnya. Jenis penelitian ini adalah penelitian deskiptif kualitatif. Peneliti menggunakan metode studi kasus. Studi kasus cocok digunakan bila penelitian berkenaan dengan how dan why. Peneliti menjabarkan hasil dari penelitian yang dilakukan dalam bentuk narasi. Sampel dari populasi yang diambil melalui proses teknik cuplikan dengan maximum variation sampling atau pengambilan sampel variasi maksimum. Selain menggunakan teknik sampel variasi maksimum, peneliti menggunakan teknik cuplikan snowball sampling. Peneliti mengambil sampel fotografer non profesional di Kota Solo. Teknik pengumpulan data melalui in-depth interview (wawancara mendalam dan observasi lingkungan terhadap sampel penelitian. Untuk validasi data, peneliti menggunakan triangulasi sumber Hasil penelitian ini menunjukan bahwa memiliki memiliki karakteristik dan saluran komunikasi komunikasi tersendiri ketika mereka menerima informasi mengenai inovasi dan memutuskan untuk mengadopsi teknologi tersebut. Hal ini misalnya bisa dilihat dari pemilihan media dalam berkomunikasi dan menggunakan berbagai media untuk referensi mengumpulkan informasi terkait dengan inovasi.   Kata kunci: difusi inovasi, innovator, early adopter, early majority, late majority, pola komunikasi.

  19. APLIKASI THERMAL PRE-TREATMENT LIMBAH TANAMAN JAGUNG (Zea mays SEBAGAI CO·SUBSTRAT PADA PROSES ANAEROBIK DIGESTI UNTUK PRODUKSI BIOGAS

    Directory of Open Access Journals (Sweden)

    Darwin Darwin

    2016-04-01

    mikroorganisme anaerobik untuk mengkonversi polimer yang berupa selulosa dan hemiselulosa menjadi biogas. Tujuan dari penelitian ini adalah untuk melakukan kajian mengenai penerapan thermal pre-treatment pada limbah tanaman jagung terhadap proses anaerobik digesi yang meliputi efisiensi proses digesi dan produksi biogas yang dihasilkan. Penelitian ini dilakukan dengan menggunakan reaktor tipe batch yang suhunya dipertahankan pada kondisi mesophilic atau di atas rata-rata suhu kamar (33 ± 2 oC. Hasil penelitian diperoleh bahwa thermal pre-treatment yang diberikan pada limbah tanaman jagung mampu mempercepat proses produksi biogas pada 10 hari pertama sehingga dapat mengurangi lag-phase pada proses anaerobik digesi. Limbah tanaman jagung yang diberikan thermal pre-treatment mengalami perlambatan produksi biogas pada hari ke 26 dengan rata-rata total produksi 12.412,5 mL untuk limbah tanaman jagung yang diberikan thermal pre- treatment selama 15 menit, dan 12.310 mL untuk limbah tanaman jagung yang diberikan thermal pre-treatment selama 25 menit, sedangkan limbah tanaman jagung yang tidak diberikan pre-treatment menghasilkan produksi biogas sebesar 12.557 mL pada hari ke 26. Produksi biogas harian tertinggi terjadi pada substrat yang diberikan thermal pre-treatment 25 menit, dengan produksi biogas tertinggi pada hari ke 9 dengan rata-rata produksi sebesar 915 mL. Substrat yang diberikan thermal pre-treatment 15 menit juga memproduksi biogas jauh lebih tinggi (772,5 mL pada hari ke 9 jika dibandingkan dengan substrat tanpa diberikan pre-treatment yang hanya memproduksi biogas sebesar 405 mL. Data hasil penelitian menunjukkan bahwa limbah tanaman jagung yang diberikan thermal pre-treatment memperoleh biogas yield lebih tinggi dari pada yang tidak diberikan pre-treatment dimana 670,39 mL/g volatile solids untuk thermal pre- treatment 15 menit, 690,65 mL/g volatile solids untuk thermal pre-treatment 25 menit dan 456,37 mL/g volatile solids untuk limbah tanaman jagung yang tidak

  20. Domates Pulpu ve Salçasında Viskozite (Konsistens ve Renk Üzerine Proses Koşullarının Etkisi

    Directory of Open Access Journals (Sweden)

    Aziz Ekşi

    2015-02-01

    Full Text Available Kıvam ve renk, domates pulpu ve salçada kaliteyi belirleyen ve ticarette üzerinde en çok durulan iki önemli etkendir. Domates salçasında renk ve kıvam ile hammaddenin durumu arasında yakın bir ilişki bulunduğu bilinmektedir. Ancak her iki kalite öğesini ve özellikle kıvamı, hammadde olduğu kadar, proses koşulları da etkilemektedir.

  1. Rancang Bangun Auto Switch PID pada Sistem ILFM (In Line Flash Mixing Untuk Proses Netralisasi pH

    Directory of Open Access Journals (Sweden)

    Hariadi Kurniawan

    2013-09-01

    Full Text Available Perubahan nilai pH larutan asam terhadap penambahan larutan basa memiliki sifat nonlinier. Pada umumnya pengendalian PID digunakan pada proses yang linier. Namun demikian, pada pengendalian pH yang merupakan proses nonlinier  ini akan diterapkan auto switch PID sebagai solusinya. Sistem ILFM merupakan  pengembangan dari sistem CSTR (Continous Stirred Tank Reactor yang mengasumsikan reaksi asam-basa terjadi secara cepat. Pada sistem ILFM laju aliran asam dibuat konstan sedangkan laju aliran basa dapat dikontrol. Pompa DC 12V digunakan untuk mengalirkan larutan asam dan basa. Alat ukur pH yang digunakan adalah pH meter YK-2001PH. Software LabVIEW digunakan sebagai penanaman algoritma autoswitch PID dan HMI pada tugas akhir ini. Auto switch PID akan bekerja sesuai dengan daerah linier yang telah dibagi. Daerah linier tersebut didapatkan berdasarkan hasil kurva eksperimen titrasi larutan CH3COOH 0,1M, 16,25ml dengan NaOH 0,1M, 20 ml.  Terdapat tiga daerah linier pada kurva titrasi, yaitu 3,5≤pH≤6,21, 6,22≤pH≤10,73 dan 10,74≤pH≤11,9. Pada uji closed loop,untuk setpoint pH5 didapatkan nilai karateristik respon maximum overshoot sebesar 19,6 %,Ess (error steady state sebesar 0,04% dan Ts (Time Settling sebesar 6s. Pada uji setpoint 6 didapatkan maximum overshoot 3,3%, Ess 3% dan Ts 13s. Pada uji nilai setpoint pH 11 didapatkan maximum overshoot sebesar 6 %,Ess sebesar 2,7% dan Ts sebesar 20s. Pada tracking turun nilai setpoint pH 11-5 didapatkan maximum overshoot 1,6%,Ess sebesar  1% dan Ts sebesar 8s. Pada daerah linier 2 tidak dapat tercapainya SP yang diinginkan. Hal ini dikarenakan daerah linier 2 adalah  daerah kritis dengan penambahan 1ml/s akan mengubah nilai pH menjadi 2 kali semula sedangkan resolusi pompa melibihi dari 1mL/s.

  2. UNJUK KERJA APLIKASI DIGITAL SIGNAGE XIBO PADA PROSES PEMBUATAN PAPAN PENGUMUMAN DIGITAL DI JURUSAN TEKNIK ELEKTRO

    Directory of Open Access Journals (Sweden)

    Ketut Udy Ariawan

    2016-01-01

    Full Text Available Pendidikan Ganesha telah memanfaatkan media website sebagai sarana penyampaian informasi. Namun dalam lingkungan internal jurusan masih juga menggunakan cara konvensional dengan menempel lembar pengumuman pada papan informasi yang tersedia. Di era digital, papan pengumuman bermigrasi dari bentuk konvensional ke bentuk digital, sehingga dikenal istilah digital signage. Bentuk digital signage yang sering diterapkan saat ini adalah menggunakan seperangkat komputer yang dihubungkan ke satu atau beberapa buah TV Plasma untuk menampilkan informasi. Salah satu aplikasi digital signage yang mendukung proses pembuatan papan pengumuman digital dan berbasis Web adalah XIBO yang bersifat open source. Pada penelitian ini, proses pembuatan papan pengumuman digital dilakukan dengan cara membuat sebuah sistem yang terdiri dari komposisi software (XIBO, Web Hosting, dan Internet dan hardware (PC Server, PC Client, dan TV Plasma. Aplikasi XIBO yang digunakan terdiri dari XIBO CMS untuk diinstallkan pada web hosting melalui PC Server, XIBO CLIENT FOR WINDOWS untuk diinstallkan pada PC Client agar bisa terhubung dengan PC Server, dan TV Plasma digunakan untuk menampilkan display hasil desain konten papan pengumuman digital yang telah dibuat agar terlihat lebih tajam, cerah, dan besar jika dibandingkan menggunakan monitor komputer biasa. Penerapan XIBO pada web hosting dimaksudkan agar proses pembuatan desain konten papan pengumuman digital dan jadwal tayangnya dapat dilakukan secara online, dimana saja, dan kapan saja oleh admin, sehingga hal ini akan menjadikan digital signage lebih efektif dan efisien dari segi waktu, tenaga, dan biaya serta mudah dalam hal pengoperasiannya. Hasil penelitian ini nantinya diharapkan dapat memberikan kontribusi pada sarana penyampaian informasi secara digital terutama dalam bidang periklanan/advertising. Kata-kata kunci: Digital Signage, Web Hosting, XIBO. ABSTRACT During this time the Department of Electrical Engineering at the

  3. The Mythical, Fantastic and Allegorical Sphere of D.R. Popescu’s Prose

    Directory of Open Access Journals (Sweden)

    Paul Dugneanu

    2016-12-01

    Full Text Available The literature belonging to various genres extended mythological narrative, given that in both cases the main focus is on the narrative of events that took place in a past more or less fabulous. The extension of myth in ritual demonstrates that the message sent by the first is a truth. A convincing argument for this assumption is the fact that in traditional societies the life is highly ritualized. The existence, the experiences and pursuits are modeled after the mythical scheme. The only one that could legitimize them and could offer an entire authority is the myth because man follows his behavior revealed by myth but its consequences also. In D.R. Popescu’s prose, the myth descends to human understanding and living the story is much more possible. The true meanings are deep and paradoxically, not only because it offers solutions to various problems but because it calls the archaic man to transform his condition. Hence, the myth represents a human’s dream to transcend the mortal condition and to integrate his existence in a sacred universe. The mythical vitalism takes place in a system of its own affirmation and the human is showcased excessively in multiple perspectives, drawn to thresholds of experiences.

  4. Epistolary Prose in Modern Ukrainian Literature (O. Bazaluk “Woman for Inspiration”

    Directory of Open Access Journals (Sweden)

    Olga Petriashvili

    2015-07-01

    Full Text Available Ukrainian scientist, philosopher, Professor Oleg Bazaluk in their artistic and philosophical works in detail examines gender problem in contemporary society. In 2013 he published a book “Woman for inspiration”. This is an epistolary prose — uncommon genre for modern literary. O. Bazaluk’s new work is characterized by its peculiarity. It comprises 41 letter of the main character to her granddaughter, and the letters tell us about the private life, but having been gathered up as a whole they become a completed piece of literary work. Indeed, the chronological framework of “Women for inspiration” cover seventy years of life of the heroine, the famous writer and educator, who worked in the leading universities of Paris, Beijing and Shanghai. The letters heroine are a way to gain spiritual intimacy with her granddaughter, located far away. There is not dialogue, there is only a monologue heroine. In her letters to unfold reflections of the heroine. It is a conversation with no replies. The heroine of the work — a strong personality, her biography is closely connected with the history of his native country. Personal tragedy is intertwined with the historical period of the collapse of the Soviet Union and the difficult way of formation of independentUkraine

  5. PROFESSIONAL TRANSLATOR’S ETHICS: TRANSLATION ANALYSIS OF THE EXAMPLE OF FRENCH WOMEN’S PROSE

    Directory of Open Access Journals (Sweden)

    Lyudmila Diachuk

    2018-04-01

    Full Text Available This article focuses on the ethical aspects of translation and the question of translators’ responsibility, which nowadays are major issues in Ukraine. The paper demonstrates and reviews numerous cases of copyright infringement. As our research has shown, the texts are sometimes translated into Ukrainian not from their source language, but from Russian translations, which leads to double manipulations with the text. To verify this claim, French women’s belles-lettres texts and their Ukrainian and Russian translations have been analysed and compared. The post-Soviet period of Ukraine’s development has showcased not only the translation-related issues, but also the moral and ethical attitude of translators and publishing houses towards translation as the sphere of copyright. This analysis of Ukrainian translations raises concerns that some book titles, and sometimes the entire belles-lettres works of French women’s prose, have been “copied” from Russian translations. The most significant, in this respect, is the Ukrainian translation of George Sand’s novel “Consuelo”, translated by Viktor Boyko and published in 2011 by the Kharkiv publishing house “Folio”.

  6. ADSORPSI POLUTAN ION DIKROMAT MENGGUNAKAN ZEOLIT ALAM TERMODIFIKASI AMINA (Adsorption of Dichromate Ions Pollutant Using Ammine Modified-Natural Zeolites

    Directory of Open Access Journals (Sweden)

    Eko Sri Kunarti

    2015-11-01

    Full Text Available ABSTRAK Kromium (VI merupakan polutan logam berat berbahaya bagi kesehatan dan lingkungan oleh karena itu pengambilan ion Cr(VI dalam air penting dilakukan untuk mengatasi pencemaran lingkungan. Proses adsorpsi merupakan salah satu teknik sederhana yang dapat digunakan untuk pengambilan ion logam. Pada penelitian ini telah dilakukan kajian adsorpsi ion dikromat sebagai model limbah Cr(VI dalam air menggunakan adsorben zeolit alam termodifikasi amina. Penelitian diawali dengan preparasi adsorben zeolit alam termodifikasi amina. Preparasi dimulai dengan pencucian zeolit alam menggunakan akuades, kemudian refluks zeolit alam menggunakan HCl 3M. Zeolit hasil refluks selanjutnya dimodifikasi menggunakan garam ammonium kuarterner, N-cethyl-N,N,N-trimethylammonium bromide (CTAB dan amina primer, propilamin (PA. Zeolit alam (Z, zeolit teraktivasi asam (ZA dan zeolit hasil modifikasi amina selanjutnya digunakan sebagai adsorben untuk adsorpsi anion dikromat. Karakterisasi adsorben dilakukan dengan mengunakan metode spektroskopi infaramerah dan difraksi sinar-X, sedangkan jumlah anion dikromat yang teradsorpsi dianalisis dengan spektroskopi serapan atom. Hasil penelitian menunjukkan bahwa sampel zeolit mengandung mineral klinoptilolit, mordernit dan kuarsa. Struktur zeolit tidak mengalami kerusakan oleh perlakuan termal dan perlakuan kimia. Modifikasi zeolit meningkatkan efisiensi adsorpsi zeolit alam. Ion dikromat dapat teradsorpsi dengan lebih baik oleh zeolit termodifikasi amina daripada zeolit teraktivasi asam dan zeolit tanpa modifikasi, dengan kemampuan adsorpsi zeolit termodifikasi CTAB (CTAB-Z lebih besar daripada zeolit termodifikasi propilamin (PA-Z. Adsorpsi ion dikromat pada adsorben zeolit berlangsung baik dengan urutan CTAB-Z > PA-Z > ZA > Z, dengan kemampuan adsorpsi masing-masing sebesar 1,96; 1,74; 0,90 dan 0,48 mg/g. Adsorpsi anion dikromat oleh zeolit termodifikasi CTAB merupakan adsorpsi kimia (kemisorpsi dengan energi adsorpsi sebesar

  7. Pengaruh Konsentrasi Karbon Terhadap Performa Elektrokimia Katoda Lifepo4 Untuk Aplikasi Baterai Lithium Ion Tipe Aqueous Electrolyte

    Directory of Open Access Journals (Sweden)

    Ade Okta Yurwendra

    2014-09-01

    Full Text Available Baterai lithium ion rechargeable telah dipertimbangkan sebagai sebuah sumber tenaga listrik yang digunakan untuk berbagai aplikasi. LiFePO4 yang digunakan sebagai katoda, dipilih karena memiliki sifat yang ramah lingkungan tetapi memiliki konduktivitas yang lemah. LiFePO4 dilakukan proses konduktif coating menggunakan sukrosa dengan pemanasan 600oC selama 3 jam didalam atmosfer argon untuk membentuk karbon coating LiFePO4 (LiFePO4/C dengan variasi persentase berat karbon 9%, 14.5%, dan 17.8% karbon. Dari analisis cyclic voltammetry penambahan karbon coating dapat meningkatkan stabilitas didalam aqueous electrolyte. Hasil galvanostatic charge/discharge didapatkan hasil terbaik pada LiFePO4/C dengan persentase berat karbon 9% dengan kapasitas discharge 13.3 mAhg-1 dan mengalami penurunan kapasitas sebesar 2.2% setelah cycle ke 100. Penambahan karbon yang berlebihan menurunkan kapasitas LiFePO4

  8. Pengembangan Order Management System untuk Mendukung Perbaikan Proses Bisnis Pengelolaan Pemesanan Jasa Inbound dan Outbound Gudang Disertai Audit System Development Life Cycle Guna Menanggulangi Risiko Pengembangan Sistem

    OpenAIRE

    Santosa, Budi; Satrio, Rudi Theo; Abipradja, Jerrystama; Putri, Dinda Sekar

    2014-01-01

    PT XYZ adalah salah satu Perusahaan penyedia jasa logistic atau bisa disebut 3PL. Salah satu customer yang menggunakan jasa 3PL adalah DEF Company. DEF company adalah Perusahaan yang bergerak dalam bidang pendistribusian dan import barang. Ketika melakukan aktivitas pelaporan dokumen pada proses inbound dan outbound, XYZ company mengalami keterlambatan pada bulan April 2014 sebesar 5%. Keterlambatan dokumen ini disebabkan oleh tidak terorganisirnya order dokumen yang ada, sehingga akan berdam...

  9. Redesain Tempat Kerja Untuk Meningkatkan Kenyamanan Dalam Proses Peleburan Paduan Perunggu Perajin Gamelan Bali Di Desa Tihingan

    Directory of Open Access Journals (Sweden)

    IGN. Priambadi

    2015-07-01

    Full Text Available Gamelan Bali merupakan suatu alat akustik yang keberadaannya dimanfaatkan sebagai salahsatu sarana pendukung dalam melakukan upacara ritual bagi umat Hindu di Bali. Desa Tihinganadalah merupakan ikon dari gamelan Bali, karena desa ini terkenal dengan produksi gamelannyadan terkenal sampai ke Mancanegara. Proses pembuatan gamelan dimulai dari peleburanpaduan perunggu, forging, serta pelarasan yang bertujuan untuk mendapatkan nada dasar daribilah gamelan. Proses peleburan adalah merupakan peleburan paduan perunggu yang terdiridari unsur 80 % Cu dan 20 % Sn, dimana komposisi tersebut secara konvensional dipakai olehperajin untuk menjaga kualitas gamelan yang dihasilkan. Pada proses peleburan paduanperunggu temperatur yang diperlukan ± 1083 o C, pencapaian temperatur ini tentunyamenyebabkan temperatur lingkungan tempat kerja menjadi tinggi. Berdasarkan studi yangdilakukan temperatur tempat kerja perajin diukur dengan metode MRT rata-rata mencapai 42,69± 0,73 o C, temperatur ini menunjukkan kondisi tempat kerja kurang nyaman. Berdasarkankondisi tersebut, maka dilakukan studi terhadap tempat kerja perajin agar paparan panas yangterjadi dapat dikurangi sehingga tempat kerja perajin dapat ditingkatkan kenyamanannya. Studiyang dilakukan adalah mendesain ulang tempat kerja dengan memperhatikan konseppenugasan, lingkungan dan organisasi kerja. Penerapan ketiga konsep ini dalam prosespendesainan ulang (redesain pada tempat kerja perajin dimulai dari paparan panas yang terjadi,selanjutnya dilakukan perhitungan dimensi dari tempat kerja yang didasarkan atas konseptermodinamika. Studi yang dilakukan dapat disimpulkan bahwa redesain yang dilakukanmemberikan dampak yang positif terhadap kondisi lingkungan tempat kerja. Kondisi lingkungantempat kerja perajin secara thermodinamika menunjukkan bahwa faktor kenyamanan mengalamipeningkatan. Adapun perubahan dimensi bangunan sebelum redesain (S1 dan sesudahredesai (S2 tersebut mulai dari ketinggian total bangunan

  10. PERANCANGAN SISTEM METADATA UNTUK DATA WAREHOUSE DENGAN STUDI KASUS REVENUE TRACKING PADA PT. TELKOM DIVRE V JAWA TIMUR

    Directory of Open Access Journals (Sweden)

    Yudhi Purwananto

    2004-07-01

    Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Data warehouse merupakan media penyimpanan data dalam perusahaan yang diambil dari berbagai sistem dan dapat digunakan untuk berbagai keperluan seperti analisis dan pelaporan. Di PT Telkom Divre V Jawa Timur telah dibangun sebuah data warehouse yang disebut dengan Regional Database. Di Regional Database memerlukan sebuah komponen penting dalam data warehouse yaitu metadata. Definisi metadata secara sederhana adalah "data tentang data". Dalam penelitian ini dirancang sistem metadata dengan studi kasus Revenue Tracking sebagai komponen analisis dan pelaporan pada Regional Database. Metadata sangat perlu digunakan dalam pengelolaan dan memberikan informasi tentang data warehouse. Proses - proses di dalam data warehouse serta komponen - komponen yang berkaitan dengan data warehouse harus saling terintegrasi untuk mewujudkan karakteristik data warehouse yang subject-oriented, integrated, time-variant, dan non-volatile. Karena itu metadata juga harus memiliki kemampuan mempertukarkan informasi (exchange antar komponen dalam data warehouse tersebut. Web service digunakan sebagai mekanisme pertukaran ini. Web service menggunakan teknologi XML dan protokol HTTP dalam berkomunikasi. Dengan web service, setiap komponen

  11. Pengaruh Temperatur Hydrothermal Terhadap Performa Elektrokimia Lifepo4 Sebagai Katoda Baterai Ion Lithium Type Aqueous Elektrolit

    Directory of Open Access Journals (Sweden)

    Hendro Waluyo

    2014-09-01

    Full Text Available Katoda yang biasa digunakan produsen baterai lithium saat ini adalah LiCoO2. Dimana LiCoO2 memilki beberapa kekurangan beracun, tidak stabil, dan harganya mahal. Bahan katoda yang sangat menjanjikan adalah lithium iron phosphate (LiFePO4 untuk bisa menggantikan LiCoO2 .Dalam proses sintesis katoda LiFePO4 pada penelitian ini menggunakan metode hydrothermal dengan variasi temperatur 1500C,1750C dan 2000C selama 12 jam untuk waktu holdingnya. Dari hasil pengujian XRD menunjukkan terbentuknya fase LiFePO4 pada semua sampel, namun masih ditemukan zat pengotor. Untuk hasil uji SEM, serbuk LiFePO4 memiliki bentuk bulat tidak beraturan dan terjadi aglomerasi. Serbuk LiFePO4 dengan variasi temperatur 2000C memiliki performance yang paling baik dengan nilai kapasitas sebesar 109.32 mA/g hal ini karena dari hasil CV menunjukkan kinetik tranfer ion Lithium yang baik akibat distribusi ukuran partikel yang merata dan juga tingkat kristanilitas yang tinggi.

  12. Pertukaran Otomatis dalam Informasi: Perspektif Ekonomi Politik

    OpenAIRE

    Akmam, Sidharta

    2018-01-01

    Singapura merupakan mitra dagang dan investasi utama bagi Indonesia. Kedua negarasaling membutuhkan terlepas dari pasang surutnya hubungan keduanya. Hal yang seringdisoroti pemerintah Indonesia adalah harta milik warga negara Indonesia yang disimpan diSingapura dan diperkirakan mencapai 60% dari seluruh kekayaan warga Indonesia di luarnegeri. Hal ini menjadi semakin penting karena ada kebutuhan dana dalam jumlah besaruntuk menunjang pembangunan infrastruktur. Tujuan penulisan ini adalah untuk...

  13. Pengaruh Penambahan Garam Natrium Dalam Proses Pengendapan Limbah Pengolahan Gambir Terhadap Rendemen Tanin

    Directory of Open Access Journals (Sweden)

    Hendri Muchtar

    2013-06-01

    Full Text Available Wastewater from gambier industry which contains tannin has not been utilized optimally yet. The wastewater does not hold up in storage because is often overgrown with fungus, so that in the solid / powdery tannins will be more profitable. To get the tannins precipitate, it had been done research about the effect of settling material to the formation of gambier dye from waste gambier industry. This study aimed to obtain optimum yield of tannins through the precipitation process. Settling material which were used technically NaCl salt and table salt, while for pH regulator used sodium bicarbonate and saturated solution of lime. Phase of precipitation was done by adding NaHCO3  or lime water saturated in such a manner until pH 8. The addition of NaCl salt or table salt with concentration 50 g/L, 100 g/L, 150 g/L, 200 g/L, 250 g/L, 300 g/L, 350g/L, 400 g/L in 200 ml of gambier industry liquid waste. The research result was obtained that the optimum precipitate by the addition of NaCl with concentrations 300 g/L and the use of sodium bicarbonate as a pH regulator gave 30.05% yield. The addition of NaCl with concentrations above 300 g/L gave results which were not much different. Tannin dyes from wastewater of gambier treatment were in the form of brown colour flour.ABSTRAKAir limbah industri pengolahan gambir yang mengandung senyawa tanin saat ini belum dimanfaatkan secara optimum. Limbah cair ini dapat digunakan sebagai sumber warna alami atau tanin, namun tidak tahan dalam penyimpanan karena sering ditumbuhi jamur, sehingga dalam bentuk padatan/tepung tanin akan lebih menguntungkan. Untuk mendapatkan endapan tanin dilakukan penelitian pengaruh penambahan bahan pengendap terhadap pembentukan tanin dari limbah proses pengolahan gambir. Penelitian ini bertujuan untuk mendapatkan rendemen tanin yang optimal melalui proses pengendapan. Bahan pengendap yang digunakan adalah   garam NaCl  teknis,  garam dapur, sedangkan untuk pengatur pH digunakan

  14. Le rôle de la traduction dans la constitution de la prose fondamentale bulgare

    Directory of Open Access Journals (Sweden)

    Irena Kristeva

    2015-05-01

    Full Text Available Cette étude se propose d’examiner l’évolution de la traduction en Bulgarie dans l’objectif de démontrer que la littérature bulgare est née dans l’acte traductionnel. En s’appuyant sur le concept bermanien de prose fondamentale, elle cherchera à illustrer, à travers des exemples, le rôle décisif que la traduction a joué au cours des différents âges de cette littérature. L’esquisse des majeurs enjeux traductionnels tâchera de révéler les deux caractéristiques essentielles de cette activité à la fois fondatrice et compensatrice pour prouver qu’elle a contribué à la constitution de l’identité nationale, à l’épanouissement de la culture bulgare et à la consolidation de son polysystème littéraire.La réflexion sera articulée en trois volets. D’abord, elle va interroger le rapport entre la tradition et la traduction. Ensuite, elle va tracer le parcours traductif à partir du premier essai de traduction de la Bible de Cyrille et Méthode, lequel, en contribuant à la formation de l’identité linguistique bulgare, a servi de modèle aux expériences ultérieures. Enfin, elle cherchera à mettre en valeur quelques faits saillants de l’histoire de la traduction en Bulgarie qui ont influencé la création littéraire.This study aims to examine the evolution of translation in Bulgaria in order to demonstrate that Bulgarian literature was born in the translational act. Based on the concept fundamental prose of Berman, it will seek to illustrate, through examples, the decisive role that translation played in the stages of this national literature. The outline of the major translational issues will try to reveal the two essential characteristics of this founder and compensatory activity, and prove that the translation has contributed to the formation of national identity, the development of Bulgarian culture and the consolidation of his literary polysystem.The reflection will be structured in three parts

  15. Proses Produksi Pembuatan Tekstur Material pada Desain 3d Karakter Menggunakan Perangkat Lunak Maxon 3D Bodypaint

    Directory of Open Access Journals (Sweden)

    Ardiyan Ardiyan

    2014-10-01

    Full Text Available Digital production proses using integrated image editor software, which has own drawing tools function, makes easier producing textures material that applied in 3D model. The feature of image editor combined with 3D Editor Software makes the easier adjustment of 3D model needs when we see the visible improvement, so the software utilization will be more efficient. In the discussion, this study is done by making the production of 3D model, that is the 3D Character that has material texturing from utilizing the available image editor software features, so the alternative production by using the integrated image editor is possibly to be done. The discussion can be utilized as an insight into the manufacture of technical design in determining the design workflow of 3D models. Utilization of software take one example of software Maxon Cinema 4D version 14, which is used as a reference as software that integrates image processing therein. 

  16. Pengaruh Waktu Dan Temperatur Hidrolisis Dalam Proses Sintesis Furfural Dari Sekam Padi Dengan Menggunakan Metode Hidrolisis Dan Dehidrasi

    Directory of Open Access Journals (Sweden)

    Cindi Amborowati

    2017-01-01

    Full Text Available Lahan persawahan di Kalimantan Timur merupakan salah satu lahan yang masih produktif. Hal ini terlihat dari banyaknya tumpukan limbah sekam padi di tempat penggilingan padi. Limbah sekam padi tersebut belum banyak dimanfaatkan, sehingga pada penelitian ini menggunakan limbah sekam padi sebagai bahan baku pembuatan furfural. Penelitian dilakukan dengan tiga tahap, yaitu persiapan bahan baku, hidrolisa dan analisa. Pada tahap persiapan bahan baku, sekam padi dikecilkan ukurannya hingga 100 mesh, kemudian dikeringkan didalam oven. Proses hidrolisa menggunakan asam sulfat 1% sebagai katalis dengan memvariasikan waktu 10, 40, 70, 100, 130 (menit dan temperatur 30, 50, 70, 90, 105 (°C. Kemudian hasil hidrolisis disaring dan filtratnya dianalisa kuantitatif dengan metode volumetri, pada variasi waktu diperoleh hasil tertinggi yaitu pada 130 menit dengan konsentrasi furfural 8,182 mol/L, sedangkan pada variasi temperatur diperoleh hasil tertinggi pada suhu 105°C dengan konsentrasi furfural yaitu 10,741 mol/L.

  17. The Content of Dream in Islamic Mystic Prose Texts (Pre–Seventh ah/13th ad Century

    Directory of Open Access Journals (Sweden)

    S. M. Mirbagherifard

    2016-02-01

    Full Text Available Dream is one of the important topics of mystic texts and is of great significance in Islamic mysticism. Most writers of such texts have allocated a section of their books to it. Dream could be viewed from different perspectives, but it seems, what attracts mystics the most is the content of dream. The important issues considered the content of dream are seeing God, the Prophet, the Imams, the saints; the state of mystics after death; seeing angels and Paradise huris (the beauties; seeing what helps the Wayfarer in his difficulties; gaining knowledge of the future; and, finally, seeing Iblis (the Satan. In this article, an attempt is made to analyze the reactions of dreamers to each type of content by comparing the content of mentioned dreams in mystic prose texts of pre-seventh century. The results show that dreaming the beloved (God is of the most importance whereas dreaming the Satan is the least desirable one. As for the reactions, the most frequent reactions are fear, enthusiasm, hope, confidence, pride, and joy.

  18. A sub-process view of working memory capacity: evidence from effects of speech on prose memory.

    Science.gov (United States)

    Sörqvist, Patrik; Ljungberg, Jessica K; Ljung, Robert

    2010-04-01

    In this article we outline a "sub-process view" of working memory capacity (WMC). This view suggests that any relationship between WMC and another construct (e.g., reading comprehension) is actually a relationship with a specific part of the WMC construct. The parts, called sub-processes, are functionally distinct and can be measured by intrusion errors in WMC tasks. Since the sub-processes are functionally distinct, some sub-process may be related to a certain phenomenon, whereas another sub-process is related to other phenomena. In two experiments we show that a sub-process (measured by immediate/current-list intrusions) is related to the effects of speech on prose memory (semantic auditory distraction), whereas another sub-process (measured by delayed/prior-list intrusions), known for its contribution to reading comprehension, is not. In Experiment 2 we developed a new WMC task called "size-comparison span" and found that the relationship between WMC and semantic auditory distraction is actually a relationship with a sub-process measured by current-list intrusions in our new task.

  19. SOCIALIST REALISM IN LITERARY DEPICTIONS OF WAR (THE CASE OF CROATIAN PROSE NARRATIVE

    Directory of Open Access Journals (Sweden)

    Maciej Czerwiński

    2017-01-01

    Full Text Available In this article paradigms of socialist realist poetics in prose narrative on World WarTwo are taken into consideration. Some key ideologemes of socialist realism and communist worldview are underlined, such as absence of ambiguity (unequivocalness, simplifi cations, consistent mimeticism (truthful and historically concrete representation of reality, class awareness, militancy and heroism in war. Alongside theoretical and official directives, formulated by dogmatic theoreticians of socijalist realist doctrine (like Jure Franičević-Pločar who based his understandings of literature on the Soviet principles, created by Zhdanov and Stalin, there are given analyses of some literary texts written by Josip Barković, Joža Horvat, Ivo Andrić i Mate Beretin. The author focuses on literary construction of characters – the prototype illegal partisans who ruthlessly struggle against the occupiers as well as chronotopic settings which enable for the action to be set within schematized confl ict of good and evil. Including the new communist man, that is created during the revolution, there are given crucial political orientations concerning the canonized vision of the war, such as the principle of symmetry (meaning that all peoples’ traitors are fascists and the vision of the liberation from fascism as the victory of the communist revolution (in this perspective, communists are depicted as the sole antifascists.

  20. Functional and thematic diversity of essayistics (on the example if J.Brodsky prose

    Directory of Open Access Journals (Sweden)

    Maslakov Anton Alexandrovich

    2015-03-01

    Full Text Available The article analyzes how the classification of essay types is related to the genre forming features of essays. It is considered in what way at the end of XX - the beginning of the XXI century it has changed the understanding genre forming features of essays and its place in the literary process. Attention is paid to the genre of the essay universal signs, the importance of which is recognized by the majority of researchers: subjective and complex nature of the genre and “discontinuity” works of the genre. It also discusses the different types of genre classification of the essay, based on the features of the hermeneutic, communicative and tribal nature of the essay. According to the author in the construction of productive varieties of the genre classification can be an approach that takes into account the complex nature of literary essays and specificity of subjectivity associated with the position of the media statements in the work. On the example of prose works, J. Brodsky demonstrated relation with the theme of the work, genre features are highlighted in the main types of essays of the poet. The main variety of works of this author are biographical and autobiographical essay; sustainable variant is essay-journey. Subjectivity and leitmotif organization of the text in these works are the main markers of essayism.

  1. PERANCANGAN SCORE BOARD DAN TIMER MENGGUNAKAN LED RGB BERBASIS ARDUINO DENGAN KENDALI SMART PHONE ANDROID

    Directory of Open Access Journals (Sweden)

    Fina Supegina

    2015-02-01

    Full Text Available Smart Phone merupakan salah satu kecanggihan teknologi dibidang telekomunikasi yang didalamnya terdapat fitur-fitur yang dapat mempermudah pekerjaan manusia. Banyak sekali jenis smart phone  diantaranya adalah smart phone dengan OS Android. Smart phone Android merupakan smart phone yang mudah penggunaannya, baik untuk keperluan bisnis, pendidikan, hiburan dan lain-lain. Dengan media komunikasi, pertukaran informasi, pertukaran data dan sebagaginya akan terasa lebih mudah dan cepat. Kemajuan teknologi tersebut tentunya belum dapat memenuhi kebutuhan jasmani seseorang khususnya dalam bidang olahraga. Namun kehadirannya mampu mendorong kemudahan dalam bidang olahraga tersebut. Misalnya, penggunaan sistem penskoran dan timer yang menggunakan seven segment sehingga dapat digunakan pada kondisi indoor ataupun outdoor. Score board dan timer digunakan guna mempermudah juri atau wasit menentukan score dan waktu pertandingan pada beberapa cabang olahraga. Karena diketahui setiap cabang olahraga mempunyai peraturan yang berbeda prihal mengenai sistem penskoran dan waktu nya. Hasil dari penelitian ini adalah menghasilkan suatu score board dan timer menggunakan LED RGB yang dapat dikontrol melalui smart phone android. Score board dan timer yang dibuat mampu digunakan dalam beberapa cabang olahraga seperti basket, badminton, footsal dan volley.

  2. Prologues, Poetry, Prose and Portrayals: The Purposes of Fifteenth Century Fight Books According to the Diplomatic Evidence

    Directory of Open Access Journals (Sweden)

    Deacon Jacob Henry

    2016-12-01

    Full Text Available Although by far the most popular use of fifteenth century Fight Books in recent years has been their application to the study of Historical European Martial Arts and interpretations of medieval combat, this manner of learning from them was rarely what their creators had in mind. The following paper, relying primarily on the materials produced by Fiore dei Liberi, Filippo Vadi, Hans Talhoffer, and the anonymous author of Le Jeu de la Hache, will address modern practice and its connection to the source material via a study of the diplomatics of fifteenth century Fight Books, that is to say common tropes that are definitive of the genre. This has been done through analysing the roles of three of these; the purposes of introductions, of the use of language relating to the employment of either a prose or poetic structure, and the importance of the relationships between texts and illustrations. Through this application of diplomatics to Fight Books, the paper shall demonstrate how modern claims regarding authenticity are often overstated and in need of moderation.

  3. Urgensi Kecerdasan Emosional guna Menentukan Keberhasilan Peserta Didik dalam Proses Pembelajaran

    Directory of Open Access Journals (Sweden)

    agus musodiq

    2017-07-01

    kecerdasan emosional dan sosial. Kata Kunci: Kecerdasan Emosional, Proses Pembelajaran.

  4. REPETITION AS A SPECIAL TYPE OF SYNTACTIC RELATIONS IN REPRESENTED SPEECH: BASED ON THE PROSE BY MARINA TSVETAEVA

    Directory of Open Access Journals (Sweden)

    Olga Pavlovna Puchinina

    2017-03-01

    Full Text Available The author studies the peculiarities of repetition, being one of the ways to build syntactic relations in the represented speech structure, based on the prose by Marina Tsvetaeva. The article describes the different types of repetitions, their distinctive features and frequency of usage in the studied tests. The author describes different types of repetitions in the studied cases of represented speech from the point of view of their position. Repetition occurs at the beginning, end of sentences, beginning and end of a statement or paragraph, end of a statement and beginning of the next one; lexical items may be repeated in the middle of a statement. The morphology of repetitions, i.e., the way by what parts of speech the repeated words and structures are expressed, is of interest from the point of view of functional grammar. The author notes that Tsvetaeva repeats different parts of speech: conjunctions, prepositions, particles, nouns, pronouns, adverbs, numerals, verbs, modal words or a combination of two words. Moreover, due to her special intention, Tsvetaeva intensifies repetition through particular phonetic devices, such as alliteration, rhyme and rhythm, which make her prosaic works sound poetic. Purpose. The article is devoted to the topic of rendering another person’s speech, as it continues to be one of the most important issues of modern linguistics. The subject of analysis is repetition and its different types in the structure of represented speech on the material of prose texts by Marina Tsvetaeva. The author’s aims is to reveal the way these types of repetition (lexical, syntactic, semantic ones function in the structure of represented speech and what effect is achieved with their help. Methodology. The research has been conducted using the continuous sampling method and the quantitative estimation method, aimed to identify the frequency of using different types of repetition and repeated parts of speech and constructions in the

  5. Stephen Hawking's Community-Bound Voice A Functional Investigation of Self-Mentions in Stephen Hawking's Scientific Prose

    Directory of Open Access Journals (Sweden)

    Davud Kuhi

    2015-11-01

    Full Text Available Thanks to the development of the concept of metadiscourse, it is now widely acknowledged that academic/scientific writing is not only concerned with communicating purely propositional meanings: what is communicated through academic/scientific communication is seen to be intertwined with the negotiation of social and interpersonal meanings. While a large number of so called metadiscoursal resources contribute to the simultaneous negotiation of propositional and interpersonal meanings, the present study aimed at investigating the functions self-mention forms can fulfill in academic/scientific communication. Two of Stephen Hawking's scientific books were selected as the corpus of the research, and based on Tang and John's (1999 model, the constructed corpus was analyzed in terms of the functions self-mention forms can fulfill in academic/scientific writing. The findings revealed that from among the different roles identified by Tang and John, the representative role constituted the most frequent self-mention function in the corpus. The remarkably heavy presence of representative role in Hawking's scientific prose was interpreted as a further evidence for the claim that scientists are more likely to persuade readers of their ideas if they frame their messages in ways which appeal to appropriate community-recognized relationships.

  6. Ion-ion collisions and ion storage rings

    International Nuclear Information System (INIS)

    Mowat, J.R.

    1988-01-01

    Improved understanding of fundamental ion-ion interactions is expected to emerge from research carried out with ion storage rings. In this short survey the significant advantages and unique features that make stored ions useful targets for collision experiments are reviewed and discussed. It is pointed out that improvements to existing ion-ion experiments, as well as qualitatively new experiments, should occur over the next few years as ion storage rings become available for atomic physics. Some new experiments are suggested which are difficult if not impossible with present-day technology, but which seem feasible at storage rings facilities. (orig.)

  7. Pertukaran Data Antar Database Dengan Menggunakan Teknologi API

    Directory of Open Access Journals (Sweden)

    Ahmad Hanafi

    2017-03-01

    Full Text Available Electronically data interchange between institutions or companies must be supported with appropriate data storage media capacity. MySQL is a database engine that is used to perform data storage in the form of information, where the data can be utilized as needed. MYSQL has the advantage of which is to provide convenience in terms of usage, and able to work on different platforms. System requirements that must be reliable and multitasking capable of making the database not only as a data storage medium, but can also be utilized as a means of data exchange. Dropbox API is the best solution that can be utilized as a technology that supports the database to be able to Exchange data. The combination of the Dropbox API and database can be used as a very cheap solution for small companies to implement data exchange, because it only requires a relatively small Internet connection.

  8. Desain Topologi Jaringan Kabel Nirkabel PDII-LIPI dengan Cisco Three-Layered Hierarchical menggunakan NDLC

    Directory of Open Access Journals (Sweden)

    MUHAMMAD TEGUH KURNIAWAN

    2016-02-01

    Full Text Available ABSTRAK Saat ini Teknologi Informasi (TI merupakan salah satu hal yang penting dalam suatu perusahaan. Dalam penerapan TI diperlukan infrastruktur jaringan yang dapat mendukung pertukaran informasi baik melalui intranet mauapun internet yang diakses melalui kabel maupun nirkabel. Salah satu pendukung Infrastruktur jaringan adalah topologi jaringan yang handal.  PDII-LIPI (Pusat Dokumentasi dan Informasi Ilmiah - Lembaga Ilmu Pengetahuan Indonesia Jakarta merupakan lembaga di bawah LIPI yang berfokus pada tiga kegiatan yaitu  jasa  dokumentasi,  jasa  informasi, pembinaan dan pengembangan bidang dokumentasi informasi. Untuk mendukung proses bisnis berbasis TI di PDII-LIPI diperlukan infrastruktur jaringan yang memadai. Oleh karena itu, pada penelitian ini dilakukan perancangan infrastruktur jaringan kabel dan nirkabel di PDII-LIPI dengan menggunakan metode Network Development Life Cycle (NDLC. Metode ini berguna dalam mengembangkan infrastruktur jaringan kabel dan nirkabel dan dapat memantau kinerja jaringan. Dengan penelitian ini diharapkan dapat membantu PDII-LIPI dalam membangun, dan mengembangkan infrastruktur jaringan kabel dan nirkabel agar lebih optimal dalam mendukung proses bisnis yang ada. Kata Kunci: topologi jaringan, kabel, nirkabel, NDLC, PDII-LIPI. ABSTRACT Information Technology (IT has significant influence to a company. The robust network IT infrastructure should be installed earlier, supporting the information exchange through internet or intranet and it also should be easily accessible via wired or wireless network.  PDII-LIPI (Pusat Dokumentasi dan Informasi Ilmiah - Lembaga Ilmu Pengetahuan Indonesia Jakarta is an organization under LIPI which focuses on three processes for instance the documentation services, the  information services and the development of  documentation services. PDII-LIPI has already used IT to support those businesses so they must carefully choose the best network IT infrastructure. To

  9. Desain Topologi Jaringan Kabel Nirkabel PDII-LIPI dengan Cisco Three-Layered Hierarchical menggunakan NDLC

    Directory of Open Access Journals (Sweden)

    MUHAMMAD TEGUH KURNIAWAN

    2016-01-01

    Full Text Available ABSTRAK Saat ini Teknologi Informasi (TI merupakan salah satu hal yang penting dalam suatu perusahaan. Dalam penerapan TI diperlukan infrastruktur jaringan yang dapat mendukung pertukaran informasi baik melalui intranet mauapun internet yang diakses melalui kabel maupun nirkabel. Salah satu pendukung Infrastruktur jaringan adalah topologi jaringan yang handal.  PDII-LIPI (Pusat Dokumentasi dan Informasi Ilmiah - Lembaga Ilmu Pengetahuan Indonesia Jakarta merupakan lembaga di bawah LIPI yang berfokus pada tiga kegiatan yaitu  jasa  dokumentasi,  jasa  informasi, pembinaan dan pengembangan bidang dokumentasi informasi. Untuk mendukung proses bisnis berbasis TI di PDII-LIPI diperlukan infrastruktur jaringan yang memadai. Oleh karena itu, pada penelitian ini dilakukan perancangan infrastruktur jaringan kabel dan nirkabel di PDII-LIPI dengan menggunakan metode Network Development Life Cycle (NDLC. Metode ini berguna dalam mengembangkan infrastruktur jaringan kabel dan nirkabel dan dapat memantau kinerja jaringan. Dengan penelitian ini diharapkan dapat membantu PDII-LIPI dalam membangun, dan mengembangkan infrastruktur jaringan kabel dan nirkabel agar lebih optimal dalam mendukung proses bisnis yang ada. Kata Kunci: topologi jaringan, kabel, nirkabel, NDLC, PDII-LIPI.   ABSTRACT Information Technology (IT has significant influence to a company. The robust network IT infrastructure should be installed earlier, supporting the information exchange through internet or intranet and it also should be easily accessible via wired or wireless network.  PDII-LIPI (Pusat Dokumentasi dan Informasi Ilmiah - Lembaga Ilmu Pengetahuan Indonesia Jakarta is an organization under LIPI which focuses on three processes for instance the documentation services, the  information services and the development of  documentation services. PDII-LIPI has already used IT to support those businesses so they must carefully choose the best network IT infrastructure. To

  10. Sistem Administrasi Proses Belajar Mengajar Di Program Studi Teknik Telekomunikasi PNJ Berbasis Android dengan Transmisi WiFi

    Directory of Open Access Journals (Sweden)

    Toto Supriyanto

    2016-11-01

    Full Text Available Sistem Administrasi Proses Belajar Mengajar di Program Studi Teknik Telekomunikasi PNJ Berbasis Android dengan Transmisi Wifi  merupakan sebuah sistem untuk pencatatan kegiatan belajar mengajar berupa absen mahasiswa dan materi pembelajaran setiap harinya. Web server bertindak sebagai admin dan aplikasi android sebagai user. User dalam hal ini adalah dosen. Aplikasi ini terinstal pada tablet PC dan setiap menggunakan aplikasi ini user akan melakukan login terlebih dahulu dengan memasukkan username dan password sesuai dengan database server. Setelah melakukan login aplikasi akan menampilkan halaman menu. Pada halaman menu berisi  profil dosen, kelas dan mata kuliah yang diajar oleh dosen, kurikulum yang ada di program studi teknik telekomunikasi PNJ dan jadwal mengajar dosen. Pada menu jadwal, dosen dapat melakukan absensi mahasiswa didik. Dosen melakukan absen satu persatu dengan menekan tombol “absen”. Data absensi dikirimkan ke web server dengan transmisi wifi dan masuk ke halaman lembar kontrol kegiatan dimana user diminta untuk mencatatkan judul materi. Web server akan menyimpan seluruh data yang dikirimkan oleh aplikasi android dan mengakumulasi absensi mahasiswa. Jika terdapat mahasiswa yang tidak hadir pada jam belajar dan memiliki masalah pada jumlah absensi sistem akan mengirimkan notifikasi berupa SMS kepada mahasiswa bersangkutan melalui SMS gateway.

  11. Komunikasi Getok Tular Pengantar Popularitas Merek

    OpenAIRE

    Harjanto, Rudy; Mulyana, Deddy

    2008-01-01

    Komunikasi getok tular (Word of mouth-WOM) adalah komunikasi berantai yang beredar dengan sendirinya di suatu komunitas tertentu, merujuk pada penyampaian informasi yang pada umumnya dilakukan secara lisan, informal dari seseorang kepada orang lain secara pribadi, antara dua individu atau lebih. Perkembangan teknologi memungkinkan komunikasi getok tular juga berkembang melalui internet, situs web, maupun halaman-halaman profil online, posting dalam blog-blog pribadi maupun pertukaran informas...

  12. Heating tokamaks via the ion-cyclotron and ion-ion hybrid resonances

    International Nuclear Information System (INIS)

    Perkins, F.W.

    1977-04-01

    For the ion-ion hybrid resonance it is shown that: (1) the energy absorption occurs via a sequence of mode conversions; (2) a poloidal field component normal to the ion-ion hybrid mode conversion surface strongly influences the mode conversion process so that roughly equal electron and ion heating occurs in the present proton-deuterium experiments, while solely electron heating is predicted to prevail in deuterium-tritium reactors; (3) the ion-ion hybrid resonance suppresses toroidal eigenmodes; and (4) wave absorption in minority fundamental ion-cyclotron heating experiments will be dominated by ion-ion hybrid mode conversion absorption for minority concentrations exceeding roughly 1 percent. For the ion-cyclotron resonance, it is shown that: (1) ion-cyclotron mode conversion leads to surface electron heating; and (2) ion-cyclotron mode conversion absorption dominates fundamental ion-cyclotron absorption thereby preventing efficient ion heating

  13. PENGARUH WAKTU KONTAK TERHADAP DAYA ADSORPSI KARBON AKTIF PADA PROSES PURIFIKASI CH4 DARI BIOGAS

    Directory of Open Access Journals (Sweden)

    Nani Harihastuti

    2016-11-01

    Full Text Available ABSTRAK Penggunaan biogas sebagai bahan bakar secara langsung sering menimbulkan permasalahan yaitu terjadi bau tidak sedap, peralatan logam  dan kompor cepat berkarat, dinding dapur terkikis  dan api sering  padam sendiri. Hal ini disebabkan dalam biogas selain metana (CH4 terkandung gas-gas lain H2S, NH3, CO2, H2 , CO dan uap air (H2O. Beberapa gas yang bersifat impurities ( H2S, NH3, CO2 dan uap air /H2O akan menurunkan nilai kalori dari biogas dan merugikan lingkungan dan kesehatan. Tujuan dari penelitian ini adalah untuk menghilangkan gas impurities dari biogas melalui proses purifikasi sehingga diperoleh biogas yang mempunyai nilai kalor tinggi dan ramah lingkungan.Metode yang dilakukan dengan proses adsorpsi menggunakan  adsorben karbon aktif dengan variabel waktu kontak, untuk mendapatkan daya adsorpsi yang optimum dari karbon aktif terhadap gas impurities yang ada dalam biogas. Hasil penelitian ini diperoleh data- data              penghilangan / reduksi gas  impuritis H2S mencapai 99,99% , dari 4200 ppm menjadi 0,22 ppm, penghilangan gas NH3 mencapai 94,96%, dari 12,7 ppm menjadi 0,65 ppm, penghilangan gas CO2 mencapai 77,48 %, dari 30, 77 % menjadi 6,93 %, penghilangan uap air (H2O mencapai 97,95%,  dari 0,584 mg/lt menjadi 0,012 mg/lt.Kenaikan konsentrasi methane (CH4 dari 38,2 % menjadi 84,12 %. Hasil purifikasi metana (CH4 dari biogas ini merupakan sumber energi  terbarukan yang aman dan  ramah lingkungan serta dapat di kembangkan lagi penerapannya di IKM tahu lainnya. Waktu jenuh adsorben karbon aktif diperoleh setelah  48 jam proses purifikasi berlangsung. Daya adsorpsi Karbon aktif optimum terhadap masing masing komponen gas impuritis adalah sebagai berikut terhadap H2S adalah  10,98 mg H2S/gram karbon aktif/menit, terhadap NH3  adalah 0,016 mg NH3/gram karbon aktif/menit, terhadap CO2 adalah 0,090mg CO2/gram karbon aktif/menit.Dampak yang terjadi bila biogas tidak dimanfaatkan dan dibiarkan terlepas ke

  14. Fabrication of Ceramic Membrane Chromatography for Biologics Purification

    Directory of Open Access Journals (Sweden)

    Maizirwan Mel

    2011-12-01

    Full Text Available Chromatography is one of the most important separation processes of choice for the recovery/purification of proteins and complex bio-structures. Fabrication of chromatographic membranes and their efficiency in the chromatography process has been the subject of many recent researches. In this study, a coin-like, 13 mm diameter and 3 mm thick, ceramic membrane was fabricated to be used as a chromatographic medium. The membrane is used to replace the conventional resin-based chromatography columns. Hydroxyapatite (HA powder was used as a material for the membrane fabrication. In this project, a HA powder was produced using starch as pore creating agents. Characterization processes were done for the ceramic membrane using the suitable apparatuses. Three parameters of the fabrication process (starch wt %, compaction pressure and sintering temperature were manipulated to optimize the performance of the membrane. The fabricated membrane was placed in a (FPLC system to be tested for its performance as an adsorptive membrane. (IMAC process was run by immobilizing Ni2+ ions at the membrane particles surfaces. NP protein of the (NDV was used to test the membrane's ability to bind Histidine-tagged proteins. The optimum set of process parameters that yielded in the highest porosity and good chromatogram was determined to be 5 wt % starch, 3000 psi compaction pressure and 1100°C sintering temperature.ABSTRAK: Kromatografi merupakan satu daripada proses pengasingan yang penting yang dipilih untuk perolehan/penapisan protein dan biostruktur yang kompleks. Pemfabrikatan membran kromatografi dan kecekapannya dalam proses kromatografi merupakan fokus beberapa kajian terkini. Dalam kajian ini, membran seramik berbentuk duit syiling, berdiameter 13 mm dengan ketebalan 3 mm, direka untuk digunakan sebagai perantara kromatografi. Membran ini digunakan untuk menggantikan turus kromatografi berasaskan resin yang lazim. Serbuk hidroksiapatit (HA digunakan sebagai bahan

  15. Aesthetics of Modernism in the Prose of German Female Writers at the Turn of GDR

    Directory of Open Access Journals (Sweden)

    Tamila Kyrylova

    2013-12-01

    Full Text Available The article offers the analysis of the aesthetics of modernism in the prose of German female writers at the turn of GDR. Texts of H. Königsdorf, M. Maron and B. Burmeister have a high grade of the modernist aesthetics in order to overcome the crisis cultural-historical period at the turn of GDR and also as a mode to resist against doctrines of socrealizm in the conditions of the strict regulation of art and its ideologization of the state. The fact of active using of modernist aesthetics becomes an interesting unknown case in the modern history of German female literature. Purpose of the study is to search a strong intertextual connection between novels different chronological periods in order to find out important factors and changes of national German history by means of literary contextualization female experience of dictatorship, to make links with the most important historical-literary features in the beginning of 20th century, establish reasons for return of modernist aesthetics, to prove interrelationships between turning stages of German female literature in the 20th century. The complex analysis consists of the modern methods and ideas of German studies: Gender Studies and historical-cultural analysis (W. Emmerich, S. Schaffratch. The benefits of this study let discover dynamism of national events and literary process, its projection in the newest female literature of women after 1989.

  16. ANALISIS PERGERAKAN POLUTAN TRIKLOROETILEN DALAM MEDIA BERPORI MENGGUNAKAN SENTRIFUG GEOTEKNIK (Analysis of Trichloroethylene Pollutant Migration in Porous Media Using Geotechnical Centrifuge

    Directory of Open Access Journals (Sweden)

    Muchlis Muchlis

    2016-02-01

    Full Text Available ABSTRAK Trikloroetilen (TCE adalah pelarut organik yang sering digunakan dalam proses industri. TCE adalah salah satu contoh dari Non Aqueous Phase Liquid (NAPL yang sudah banyak mencemari tanah dan air tanah. Tujuan penelitian ini adalah untuk mengetahui sifat-sifat pergerakan TCE dalam berbagai jenis tanah yang berbeda, mengkaji sifat-sifat pergerakan TCE dalam tanah dengan menggunakan kecepatan 1 dan 25 Gravitasi, dan mengetahui faktor-faktor yang mempengaruhi pergerakan TCE dalam tanah. Sifat pergerakan TCE dalam tanah riolit dan granit adalah TCE akan masuk langsung secara vertikal dan horizontal dalam tanah hingga ke dasar tanah. Pergerakan TCE akan terhambat pada tanah yang banyak mengandung partikel berukuran kecil. Pergerakan TCE secara vertikal pada gaya 1G dan 25G dalam tanah granit adalah paling cepat berbanding dalam tanah riolit. Pergerakan TCE dalam tanah kering dipengaruhi oleh sifat tanah terutama ukuran butir dan Kapasitas Pertukaran Kation (KPK. ABSTRACT Tricholoroethylene (TCE is an organic solvent used in many industrial processes. TCE is one of Non-Aqueous Phase Liquid (NAPL which has already contaminated soil and groundwater. The objectives of this study are to determine the migration of TCE in rhyolite and granite soil, to determine the migration of TCE in soil using 1 and 25 Gravity (G force, and to determine the migration of TCE influencing factors in the soil. The characteristics of TCE migration in rhyolite and granite soil will migrate vertically and laterally to the bottom of the ground. The migration will be retarded in small particle size of soil. The fastest migration of TCE at 1G and 25G was found in the granite soil. The migration of TCE in dry soil is affected by properties of soil particularly particle size and cation exchange capacity.

  17. TINJAUAN ULANG MATERI AJAR GERAK LURUS BERATURAN MELALUI PERCOBAAN GRAVITY CURRENT DALAM SKALA LABORATORIUM

    Directory of Open Access Journals (Sweden)

    A. K. Wardani

    2013-07-01

    Full Text Available ABSTRAKDalam konteks problem-based learning, salah satu masalah belajar fisika di sekolah dan di universitas adalah keterkaitan antara materi ajar dan fenomena alam dalam kehidupan sehari-hari masih minimum. Siswa, mahasiswa, guru, dan dosen masih mengalami kesulitan dalam memberikan contoh nyata GLB. Penelitian ini meninjau ulang materi ajar gerak lurus beraturan melalui percobaan gravity current sebagai sistem dua fluida dengan beda kerapatan di laboratorium dalam upaya mencari contoh nyata sistem fisis yang bergerak sepanjang garis lurus dengan kecepatan tetap. Penelitian ini dapat dipandang sebagai model proses intrusi air laut di estuari, tempat pertukaran massa air laut dan air sungai. Fokus penelitian adalah membuktikan bahwa gravity current bergerak dengan kecepatan tetap dan menentukan faktor-faktor dinamik kecepatan. Pengukuran akurat waktu tempuh dan tinggi permukaan air dalam tangki percobaan memberikan kecepatan tak-berdimensi gravity current sebesar 0,45 ± 0,03 dengan beda kerapatan massa dan tinggi awal permukaan air merupakan dua faktor dinamik penentu kecepatan. ABSTRACTIn the context of problem-based learning, one of learning difficulties in physics at schools and universities is theminimum relevance of learning materials to natural phenomena. School and university students still have difficulties in giving real examples of uniform motion. This research examines uniform motion by performing laboratory experiments on gravity current as a system of two fluids with different densities. The experiments were designed to provide a factual case of a moving system with constant speed and to model salt intrusion in an estuary, where sea water and river stream meets. The research focused on the dynamics of gravity currents and determines factors affecting the speed. Based on measurements of travel time and initial height of water surface in all experiments, the results showed that the non-dimensional speed was found to be 0.45 ± 0

  18. PERANCANGAN SISTEM PREDIKSI CHURN PELANGGAN PT. TELEKOMUNIKASI SELULER DENGAN MEMANFAATKAN PROSES DATA MINING

    Directory of Open Access Journals (Sweden)

    Rajesri Govindaraju

    2008-01-01

    Full Text Available The purpose of this research is to design a customer churn prediction system using data mining approach. This system is able to perform data integration, data cleaning, data transformation, sampling and data splitting, prediction model building, predicting customer churn, and show the results in certain agreed forms. Churn prediction variables were identified based on earlier research reports that include customer information, payment method, call pattern, complaint data, telecommunication services usage and change of telecommunication services usage behavior data. The preferred mining technique used is the classification with decision tree algorithm. The decision tree can present visual model which represents customer churn and non churn pattern behavior. This system was tested using Kartu Halo customer data in Bandung area and testing result showed 70,94% accuracy of the prediction model. Abstract in Bahasa Indonesia : Penelitian ini bertujuan merancang sistem prediksi churn pelanggan yang memanfaatkan proses data mining. Sistem yang dihasilkan dapat melakukan integrasi data, pembersihan data, transformasi data, sampling dan pemisahan data, konstruksi model prediksi, memprediksi churn pelanggan dan menampilkan hasil prediksi dalam format laporan tertentu yang diperlukan. Identifikasi variabel-variabel prediksi churn dilakukan berdasarkan model prediksi churn yang telah dikembangkan pada penelitian terdahulu yang antara lain mencakup informasi mengenai pelanggan, metode pembayaran, data percakapan, data penggunaan jenis-jenis layanan telekomunikasi dan data yang menggambarkan perubahan perilaku penggunaan layanan telekomunikasi tersebut. Teknik mining yang dipilih adalah teknik klasifikasi dengan algoritma decision tree. Decision tree menghasilkan model visual yang merepresentasikan pola perilaku pelanggan yang churn dan tidak churn. Uji coba sistem yang dilakukan menggunakan data pelanggan Kartu Halo daerah Bandung menghasilkan tingkat akurasi

  19. Calculation of ion storage in electron beams with account of ion-ion interactions

    International Nuclear Information System (INIS)

    Perel'shtejn, Eh.A.; Shirkov, G.D.

    1979-01-01

    Ion storage in relativistic electron beams was calculated taking account of ion-ion charge exchange and ionization. The calculations were made for nitrogen ion storage from residual gas during the compression of electron rings in the adhezator of the JINR heavy ion accelerator. The calculations were made for rings of various parameters and for various pressures of the residual gas. The results are compared with analogous calculations made without account of ion-ion processes. It is shown that at heavy loading of a ring by ions ion-ion collisions play a significant part, and they should be taken into account while calculating ion storage

  20. Ion-Ion Plasmas Produced by Electron Beams

    Science.gov (United States)

    Fernsler, R. F.; Leonhardt, D.; Walton, S. G.; Meger, R. A.

    2001-10-01

    The ability of plasmas to etch deep, small-scale features in materials is limited by localized charging of the features. The features charge because of the difference in electron and ion anisotropy, and thus one solution now being explored is to use ion-ion plasmas in place of electron-ion plasmas. Ion-ion plasmas are effectively electron-free and consist mainly of positive and negative ions. Since the two ion species behave similarly, localized charging is largely eliminated. However, the only way to produce ion-ion plasmas at low gas pressure is to convert electrons into negative ions through two-body attachment to neutrals. While the electron attachment rate is large at low electron temperatures (Te < 1 eV) in many of the halogen gases used for processing, these temperatures occur in most reactors only during the afterglow when the heating fields are turned off and the plasma is decaying. By contrast, Te is low nearly all the time in plasmas produced by electron beams, and therefore electron beams can potentially produce ion-ion plasmas continuously. The theory of ion-ion plasmas formed by pulsed electron beams is examined in this talk and compared with experimental results presented elsewhere [1]. Some general limitations of ion-ion plasmas, including relatively low flux levels, are discussed as well. [1] See the presentation by D. Leonhardt et al. at this conference.

  1. Peranan Teknologi dalam Mendukung Proses Berpikir Level C3 Siswa pada Materi Operasi Himpunan melalui Penggunaan Swish Max4

    Directory of Open Access Journals (Sweden)

    Arinaldi Arinaldi

    2018-03-01

    Full Text Available Perkembangan teknologi pada abad ke-21 ini sudah sangat pesat, membuat guru menjadi lebih kreatif dalam hal membuat media pembelajaran yang inovatif, menarik, serta tidak ketinggalan zaman. Dengan menggunakan media visual guru dapat memberikan visual tertentu pada siswa dalam proses pembelajaran, yang nantinya diharapkan dapat membantu siswa dalam berpikir C3. Lalu dilatar belakangi oleh kemampuan siswa yang rendah dalam mengerjakan soal applikasi operasi pada himpunan dikehidupan sehari-hari sekaligus memvisualisasikan operasi himpunan, berdasarkan survei peneliti melalui wawancara dengan guru SMP Negeri 11 Tanjungpinang. Sehingga pada penelitian ini peneliti menggunakan media visual berbasis multimedia berbantuan software swish max4, untuk membantu siswa berpikir hingga level C3 atau pada ranah mengaplikasikan khususnya pada materi operasi himpunan dan juga dapat memvisualisasikan operasi himpunan dikehidupan sehari-hari. Telah dilakukan eksperimen di kelas VII.1 dan kelas VII.2 pada SMP Negeri 11 Tanjungpinang, memperoleh hasil posttest kelas eksperimen lebih tinggi 76,24 dibangdingkan dengan kelas kontrol 66,92, terbukti bahwa kelas yang diberikan treatment media swish max4  dapat membantu siswa dalam berpikir hingga level C3 atau mengapplikasikan. Kata kunci : Swish max4, berpikir level C3, Soal applikasi operasi himpunan

  2. ANALISIS PENGARUH VARIASI PERSENTASE RAGI (Saccharomyces cerevisiae DAN WAKTU PADA PROSES FERMENTASI DALAM PEMANFAATAN DUCKWEED (Lemna minor SEBAGAI BIOETANOL

    Directory of Open Access Journals (Sweden)

    Siti Khodijah

    2015-04-01

    Full Text Available Salah satu alternatif dalam mendukung ketersediaan sumber daya energi terbarukan adalah dengan memanfaatkan sumber dari non fosil seperti bioetanol. Bioetanol merupakan etanol yang dibuat dari biomass yang mengandung komponen pati (karbohidrat atau selulosa yang selanjutnya di fermentasi menggunakan bantuan mikroorganisme (Sacharomyces cerevisiae. Karbohidrat yang digunakan pada penelitian ini berasal dari Lemna minor (Duckweed. Penelitian ini bertujuan membuat bioetanol dari Lemna minor dengan variasi penambahan ragi dan lamanya waktu fermentasi terhadap nilai kadar etanol dan nilai densitas, serta mengetahui hubungan densitas dengan kadar etanol. Produksi bioetanol dari tanaman yang mengandung pati (karbohidrat, dilakukan melalui proses konversi karbohidrat menjadi gula (glukosa dengan hidrolisis asam (HCl, hidrolisat yang diperoleh selanjutnya dilakukan fermentasi dengan menambahkan yeast atau ragi sehingga diperoleh bioetanol. Variabel yang digunakan adalah perubahan massa ragi 5%,15%, dan 25% serta lama fermentasi 5, 6, dan 7 hari . Hasil penelitian menunjukkan lama fermentasi dan persentase ragi mempengaruhi kadar etanol. Nilai kadar etanol optimum diperoleh presentase ragi 25% dengan lama fermentasi 7 hari sebesar 3.81% dengan density optimum sebesar 0.9438 gr/cm3, Hubungan nilai densitas berbanding terbalik dengan peningkatan kadar etanol.

  3. Karakter Geoarkeologis dan Proses Budaya Prasejarah Zona Poros Ponjong – Rongkop di Blok Tengah

    Directory of Open Access Journals (Sweden)

    Jarwo Susetyo Edy Yuwono

    2016-09-01

    Full Text Available ABSTRAK Penelitian ini dilakukan di Zona Poros Ponjong - Rongkop, yaitu bagian dari Blok Tengah Gunungsewu di Pegunungan Selatan Jawa, yang posisinya diapit oleh dua depresi bekas danau purba, yaitu Ledok Wonosari dan Ledok Baturetno. Morfologinya berupa punggungan perbukitan karst berarah utara-selatan antara daerah Ponjong dan Rong-kop, membentuk semacam poros hampir tegak lurus terhadap bentangan umum Gunungsewu. Bagian paling utara ber-batasan dengan pegunungan non-karst dan memiliki topografi tertinggi di Blok Tengah Gunungsewu, sehingga menjadi wilayah hulu bagi sungai-sungai bawahtanah di Gunungkidul. Melalui beberapa survei ditemukan sejumlah 56 gua yang memiliki potensi arkeologis, tujuh di antaranya sudah diekskavasi dan terbukti menyimpan jejak-jejak hunian prase-jarah dari Kala Pleistosen Akhir - Holosen Awal. Pendekatan geoarkeologis sebagai studi gabungan antara arkeologi dan geomorfologi, dilakukan untuk membangun model-model integral mengenai hubungan sistematik antara manusia dengan bentanglahan karst Gunungsewu di area penelitian. Dua hal yang menjadi tujuan utama penelitian ini adalah: Pertama, menjelaskan karakter geoarkeologis Zona Poros Ponjong - Rongkop sebagai perpaduan antara aspek-aspek geomorfologis (morfologi, morfogenesis, morfokronologi, dan morfoaransemen dan aspek-aspek arkeologis (distri-busi gua dan potensi arkeologisnya. Tujuan ini dicapai melalui penilaian dan pemetaan distribusi potensi gua sebagai situs arkeologis, kemudian menganalisis hubungannya dengan aspek-aspek geomorfologis setempat. Kedua, menjelas-kan proses budaya prasejarah, yaitu bentuk dinamis dari budaya penghunian gua beserta faktor-faktor yang mempen-garuhinya. Metode untuk mencapai tujuan ini adalah dengan menganalisis konteks data arkeologis dan stratigrafi lantai gua yang pernah diekskavasi. Sintesis kajian atas kedua capaian tujuan ini memberikan penjelasan integral atas karakter geoarkeologis dan proses budaya prasejarah di area

  4. Majority ion heating near the ion-ion hybrid layer in tokamaks

    International Nuclear Information System (INIS)

    Phillips, C.K.; Hosea, J.C.; Ignat, D.; Majeski, R.; Rogers, J.H.; Schilling, G.; Wilson, J.R.

    1995-08-01

    Efficient direct majority ion heating in a deuterium-tritium (D-T) reactor-grade plasma via absorption of fast magnetosonic waves in the ion cyclotron range of frequencies (ICRF) is discussed. Majority ion heating results from resonance overlap between the cyclotron layers and the D-T ion-ion hybrid layer in hot, dense plasmas for fast waves launched with high parallel wavenumbers. Analytic and numerical models are used to explore the regime in ITER plasmas

  5. ANALISA PENGARUH SUHU AWAL PELAT PANAS PADA PROSES QUENCHING CELAH SEMPIT REKTANGULAR

    Directory of Open Access Journals (Sweden)

    M. Hadi Kusuma

    2015-03-01

    Full Text Available Pemahaman terhadap manajemen termal apabila terjadi suatu kecelakaan parah reaktor nuklir seperti melelehnya bahan bakar dan teras reaktor, menjadi prioritas utama untuk menjaga integritas bejana tekan reaktor. Dengan demikian hasil lelehan bahan bakar dan teras reaktor (debris tidak keluar dari bejana tekan reaktor dan mengakibatkan dampak lain yang lebih besar ke lingkungan. Salah satu cara yang dilakukan untuk menjaga integritas bejana tekan reaktor adalah dengan melakukan pendinginan terhadap panas berlebih yang dihasilkan akibat dari kecelakaan tersebut. Untuk mempelajari dan mendapatkan pemahaman mengenai hal tersebut, maka dilakukan penelitian mengenai pengaruh suhu awal pelat panas dalam proses quenching (pendinginan secara tiba-tiba celah sempit rektangular. Penelitian difokuskan pada penentuan suhu rewetting dari pendinginan pelat panas dengan suhu awal pelat 220 0C, 400 0C, dan 600 0C dengan laju aliran air pendingin 0,2 liter/detik. Eksperimen dilakukan dengan menginjeksikan air pada laju aliran 0,2 liter/detik pada suhu air pendingin 85 0C ke dalam celah sempit rektangular. Data hasil pengukuran digunakan untuk mengetahui suhu rewetting yang terjadi pada pendinginan pelat panas tersebut. Tujuannya adalah untuk memahami pengaruh suhu awal pelat panas terhadap rewetting pada proses quenching di celah sempit rektangular. Hasil yang diperoleh menunjukkan bahwa titik rewetting pada pendinginan pelat panas 220 0C, 400 0C, dan 600 0C terjadi pada suhu rewetting yang berbeda-beda. Pada suhu awal pelat panas 220 0C, suhu rewetting terjadi pada 220 0C yaitu langsung ketika air dilewatkan melalui celah sempit rektangular. Pada suhu awal pelat panas 400 0C, suhu rewetting terjadi pada 379,51 0C. Dan pada suhu awal pelat panas 600 0C, suhu rewetting terjadi pada 426,63 0C. Perbedaan suhu awal pelat panas yang sangat signifikan menyebabkan terjadinya perubahan sifat fisik benda uji, berbedanya rejim pendidihan yang dialami oleh fluida yang

  6. ANALISIS ENERGI MASUKAN-KELUARAN PADA PROSES PRODUKSI KELAPA SAWIT (Elaesis guineensis jacq. Input-Output Energy Analyisis in Oil Palm Production

    Directory of Open Access Journals (Sweden)

    Agus Haryanto

    2012-03-01

    Penelitian ini bertujuan untuk menganalisis energi masukan-keluaran dan mengidentifikasi kemungkinan penghematan energi pada proses budidaya kelapa sawit. Penelitian dilakukan di PTPN VII Unit Usaha Rejosari, Lampung Selatan dengan mengamati semua energi yang digunakan dan dihasilkan. Energi masukan terdiri dari tenaga manusia, bahan bakar, energi tidak langsung dari pupuk, pestisida, dan alat-mesin pertanian. Energi keluaran berasal dari tandan buah segar (TBS dengan komponen minyak sawit, minyak inti sawit, serat, cangkang, dan tandan kosong, serta pelepah. Hasil penelitian menunjukkan bahwa budidaya kelapa sawit memerlukan energi masukan sebesar 57,63 GJ.ha-1  dan menghasilkan energi 339,14 GJ.ha-1. Sebagian besar energi masukan adalah penggunaan pupuk yang mencapai 31,22 GJ.ha-1  (54,18 % dari total energi masukan. Berdasarkan tahapan budidaya, maka pemeliharaan tanaman produktif memerlukan energi yang paling besar yaitu 33,06 GJ.ha-1  (57,37 %. Budidaya kelapa sawit menghasilkan energi neto 281,51 GJ.ha-1 dengan rasio energi 5,88, produktivitas energi 0,258 kg TBS/MJ, dan intensitas energi 3,87 MJ/kg TBS.   Kata kunci: Analisis energi, energi masukan, energi keluaran, indikator energi

  7. An RF ion source based primary ion gun for secondary ion mass spectroscopy

    International Nuclear Information System (INIS)

    Menon, Ranjini; Nabhiraj, P.Y.; Bhandari, R.K.

    2011-01-01

    In this article we present the design, development and characterization of an RF plasma based ion gun as a primary ion gun for SIMS application. RF ion sources, in particular Inductively Coupled Plasma (ICP) ion sources are superior compared to LMIS and duoplasmtron ion sources since they are filamentless, can produce ions of gaseous elements. At the same time, ICP ion sources offer high angular current density which is an important factor in producing high current in small spot size on the target. These high current microprobes improve the signal to noise ratio by three orders as compared to low current ion sources such as LMIS. In addition, the high current microprobes have higher surface and depth profiling speeds. In this article we describe a simple ion source in its very basic form, two lens optical column and characteristics of microprobe

  8. Ion mixing and numerical simulation of different ions produced in the ECR ion source

    International Nuclear Information System (INIS)

    Shirkov, G.D.

    1996-01-01

    This paper is to continue theoretical investigations and numerical simulations in the physics of ECR ion sources within the CERN program on heavy ion acceleration. The gas (ion) mixing effect in ECR sources is considered here. It is shown that the addition of light ions to the ECR plasma has three different mechanisms to improve highly charged ion production: the increase of confinement time and charge state of highly ions as the result of ion cooling; the concentration of highly charged ions in the central region of the source with high energy and density of electrons; the increase of electron production rate and density of plasma. The numerical simulations of lead ion production in the mixture with different light ions and different heavy and intermediate ions in the mixture with oxygen, are carried out to predict the principal ECR source possibilities for LHC applications. 18 refs., 23 refs

  9. Recoil ion spectroscopy with heavy ions

    International Nuclear Information System (INIS)

    Beyer, H.F.; Mann, R.

    1984-01-01

    This chapter examines the production of very high charge state ions in single ion-atom collisions. Topics considered include some aspects of highly ionized atoms, experimental approaches, the production of highly charged target ions (monoatomic targets, recoil energy distribution, molecular fragmentation, outer-shell rearrangement, lifetime measurements, a comparison of projectile-, target-, and plasma-ion stripping), and secondary collision experiments (selective electron capture, potential applications). The heavy-ion beams for the described experiments were provided by accelerators such as tandem Van de Graaff facility and the UNILAC

  10. Surface negative ion production in ion sources

    International Nuclear Information System (INIS)

    Belchenko, Y.

    1993-01-01

    Negative ion sources and the mechanisms for negative ion production are reviewed. Several classes of sources with surface origin of negative ions are examined in detail: surface-plasma sources where ion production occurs on the electrode in contact with the plasma, and ''pure surface'' sources where ion production occurs due to conversion or desorption processes. Negative ion production by backscattering, impact desorption, and electron- and photo-stimulated desorption are discussed. The experimental efficiencies of intense surface negative ion production realized on electrodes contacted with hydrogen-cesium or pure hydrogen gas-discharge plasma are compared. Recent modifications of surface-plasma sources developed for accelerator and fusion applications are reviewed in detail

  11. Ion-ion collisions

    International Nuclear Information System (INIS)

    Salzborn, Erhard; Melchert, Frank

    2000-01-01

    Collisions between ions belong to the elementary processes occurring in all types of plasmas. In this article we give a short overview about collisions involving one-electron systems. For collisions involving multiply-charged ions we limit the discussion to one specific quasi-one-electron system. (author)

  12. OPTIMASI PROSES MESIN STRETCH BLOW MOULDING PADA BOTOL 600 ML DENGAN METODE RSM (RESPONSE SURFACE METHODOLOGY STUDI KASUS DI PT. UNIPLASTINDO INTERBUANA

    Directory of Open Access Journals (Sweden)

    Mochamad Mas'ud

    2017-04-01

    Full Text Available Pada proses produksi Aqua botol plastik 600 ml menggunakan mesin stretch blow moulding dengan sistem pneumatik, Pembuatan produk dengan menggunakan mesin ini memiliki faktor-faktor yang dapat mempengaruhi kualitas botol yang dihasilkan . Penyimpangan ukuran (pemerataan tebal botol dan kemiringan botol tidak sesuai dengan spesifikasi mengakibatkan botol dibagian pundak putih dan bergelang (shrinkage. Tujuan dari penelitian ini yaitu mengoptimalkan setting parameter mesin stretch blow moulding agar menghasilkan kualitas baik pada produk botol plastik 600 ml. Adapun variable(prediktor yang di pilih yaitu preblow (bar, preform temperature (, dan P1 point (mm, sedangkan respon yang dicari yaitu kemiringan minimal dan tebal maksimal. Metode yang di gunakan dalam penelitian ini yaitu menggunakan Response Surface Metodhology (RSM yang mana dalam perhitungannya menggunakan software minitab 16. Dengan menggunakan Box Behnken Design dan 3 level factorial di hasilkan run 15 percobaan. Berdasarkan hasil kondisi yang optimal parameter yaitu preblow sebesar 6,5 bar, preform temperature sebesar 114 , dan P1 Point sebesar 25 mm. Dengan setting sebesar tersebut akan menghasilkan respon tebal botol sebesar 0,1446 dan kemiringan botol sebesar 0,1875.

  13. Numerical simulation of ion temperature gradient driven modes in the presence of ion-ion collisions

    International Nuclear Information System (INIS)

    Xu, X.Q.

    1990-08-01

    Ion temperature gradient driven modes in the presence of ion-ion collisions in a toroidal geometry with trapped ions have been studied by using a 1 2/2 d linearized gyro-kinetic particle simulation code in the electrostatic limit. The purpose of the investigation is to try to understand the physics of flat density discharges, in order to test the marginal stability hypothesis. Results giving threshold conditions of L Ti /R 0 , an upper bound on k χ , and linear growth rates and mode frequencies over all wavelengths for the collisionless ion temperature gradient driven modes are obtained. The behavior of ion temperature gradient driven instabilities in the transition from slab to toroidal geometry, with trapped ions, is shown. A Monte Carlo scheme for the inclusion of ion-ion collisions, in which ions can undergo Coulomb collisional dynamical friction, velocity space diffusion and random walk of guiding centers, has been constructed. The effects of ion-ion collisions on the long wave length limit of the ion modes is discussed. 44 refs., 12 figs

  14. Uji Efektivitas Jeruk Nipis (Citrus aurantifolia dalam Mempercepat Laju Disinfeksi Bakteri Escheria Coli pada Proses Solar Water Disinfection

    Directory of Open Access Journals (Sweden)

    Saprian Saprian

    2015-08-01

    Full Text Available Solar Water Disinfection (SODIS memerlukan waktu rata-rata berkisar antara 5-6 jam untuk dapat membunuh bakteri 3-4 Log pada air berkapasitas maksimal 2 liter atau 1 jam dengan suhu di atas 50°C. Penelitian terbaru menunjukkan bahwa dengan mengkombinasikan SODIS dengan psoralens, zat aktif seperti yang terdapat pada jeruk Lemon (Citrus Limon dapat menginaktivasi bakteri hingga 5,6 Log reduksi dalam rentang waktu 30 menit pada suhu 29°C. Mengingat faktor ketersediaan dan harga jeruk lemon di Indonesia maka pada penelitian ini dilakukan pengamatan dengan menggunakan jeruk nipis (Citrus aurantifolia. Penelitian ini dilakukan untuk mengetahui seberapa besar potensi jeruk nipis untuk dipergunakan dalam mempercepat laju disinfeksi pada proses SODIS. Adapun faktor-faktor yang akan dipelajari terkait dengan hubungan antara variasi dosis jeruk nipis, perubahan pH dan suhu air terhadap efisiensi inaktivasi bakteri yang mampu dihasilkan. Variasi jeruk nipis yang digunakan adalah 0%, 2%, 4% dan 6% dengan variasi waktu 0 menit, 30 menit, 60 menit dan 120 menit. Hasil penelitian menunjukkan bahwa perlakuan SODIS dengan menggunakan jeruk nipis mampu menginaktivasi E. coli sebesar 5.4 Log dengan waktu 1 jam pada suhu 32°C. Hal ini menunjukkan bahwa Jeruk nipis berpotensi untuk digunakan dalam mempercepat laju disinfeksi E. coli pada air minum. Kata Kunci : SODIS, E.coli, Psoralens, Jeruk Nipis

  15. Scanning ion microscopy with low energy lithium ions

    International Nuclear Information System (INIS)

    Twedt, Kevin A.; Chen, Lei; McClelland, Jabez J.

    2014-01-01

    Using an ion source based on photoionization of laser-cooled lithium atoms, we have developed a scanning ion microscope with probe sizes of a few tens of nanometers and beam energies from 500 eV to 5 keV. These beam energies are much lower than the typical operating energies of the helium ion microscope or gallium focused ion beam systems. We demonstrate how low energy can be advantageous in ion microscopy when detecting backscattered ions, due to a decreased interaction volume and the potential for surface sensitive composition analysis. As an example application that demonstrates these advantages, we non-destructively image the removal of a thin residual resist layer during plasma etching in a nano-imprint lithography process. - Highlights: • We use an ion source based on photoionization of laser-cooled lithium atoms. • The ion source makes possible a low energy (500 eV to 5 keV) scanning ion microscope. • Low energy is preferred for ion microscopy with backscattered ions. • We use the microscope to image a thin resist used in nano-imprint lithography

  16. Ion microtomography using ion time-of-flight

    International Nuclear Information System (INIS)

    Roberts, M.L.; Heikkinen, D.W.; Proctor, I.D.; Pontau, A.E.; Olona, G.T.; Felter, T.E.; Morse, D.H.; Hess, B.V.

    1992-01-01

    We have developed and are in the process of testing an ion time-of-flight (TOF) detector system for use in our ion microtomography measurements. Using TOF, ion energy is determined by measurement of the ion's flight time over a certain path length. For ion microtomography, the principle advantage of TOF analysis is that ion count rates of several hundred thousand counts per second can be achieved as compared to a limit of about ten thousand ions per second when using a solid-state silicon surface barrier detector and associated electronics. This greater than 10 fold increase in count rate correspondingly shortens sample analysis time or increases the amount of data that can be collected on a given sample. Details of the system and progress to date are described

  17. Ion implantation

    International Nuclear Information System (INIS)

    Dearnaley, Geoffrey

    1975-01-01

    First, ion implantation in semiconductors is discussed: ion penetration, annealing of damage, gettering, ion implanted semiconductor devices, equipement requirements for ion implantation. The importance of channeling for ion implantation is studied. Then, some applications of ion implantation in metals are presented: study of the corrosion of metals and alloys; influence or ion implantation on the surface-friction and wear properties of metals; hyperfine interactions in implanted metals

  18. Ion Beam Extraction by Discrete Ion Focusing

    DEFF Research Database (Denmark)

    2010-01-01

    An apparatus (900) and methods are disclosed for ion beam extraction. In an implementation, the apparatus includes a plasma source (or plasma) (802) and an ion extractor (804). The plasma source is adapted to generate ions and the ion extractor is immersed in the plasma source to extract a fracti...

  19. Ion creation, ion focusing, ion/molecule reactions, ion separation, and ion detection in the open air in a small plastic device.

    Science.gov (United States)

    Baird, Zane; Wei, Pu; Cooks, R Graham

    2015-02-07

    A method is presented in which ions are generated and manipulated in the ambient environment using polymeric electrodes produced with a consumer-grade 3D printer. The ability to focus, separate, react, and detect ions in the ambient environment is demonstrated and the data agree well with simulated ion behaviour.

  20. Thermal Orbital Environmental Parameter Study on the Propulsive Small Expendable Deployer System (ProSEDS) Using Earth Radiation Budget Experiment (ERBE) Data

    Science.gov (United States)

    Sharp, John R.; McConnaughey, Paul K. (Technical Monitor)

    2002-01-01

    The natural thermal environmental parameters used on the Space Station Program (SSP 30425) were generated by the Space Environmental Effects Branch at NASA's Marshall Space Flight Center (MSFC) utilizing extensive data from the Earth Radiation Budget Experiment (ERBE), a series of satellites which measured low earth orbit (LEO) albedo and outgoing long-wave radiation. Later, this temporal data was presented as a function of averaging times and orbital inclination for use by thermal engineers in NASA Technical Memorandum TM 4527. The data was not presented in a fashion readily usable by thermal engineering modeling tools and required knowledge of the thermal time constants and infrared versus solar spectrum sensitivity of the hardware being analyzed to be used properly. Another TM was recently issued as a guideline for utilizing these environments (NASA/TM-2001-211221) with more insight into the utilization by thermal analysts. This paper gives a top-level overview of the environmental parameters presented in the TM and a study of the effects of implementing these environments on an ongoing MSFC project, the Propulsive Small Expendable Deployer System (ProSEDS), compared to conventional orbital parameters that had been historically used.

  1. Study of ion exchange equilibrium and determination of heat of ion exchange by ion chromatography

    International Nuclear Information System (INIS)

    Liu Kailu; Yang Wenying

    1996-01-01

    Ion chromatography using pellicularia ion exchange resins and dilute solution can be devoted to the study of ion exchange thermodynamics and kinetics. Ion exchange equilibrium equation was obtained, and examined by the experiments. Based on ion exchange equilibrium, the influence of eluent concentration and resin capacity on adjusted retention volumes was examined. The effect of temperature on adjusted retention volumes was investigated and heats of ion exchange of seven anions were determined by ion chromatography. The interaction between anions and skeleton structure of resins were observed

  2. Polyatomic ions from a high current ion implanter driven by a liquid metal ion source

    Science.gov (United States)

    Pilz, W.; Laufer, P.; Tajmar, M.; Böttger, R.; Bischoff, L.

    2017-12-01

    High current liquid metal ion sources are well known and found their first application as field emission electric propulsion thrusters in space technology. The aim of this work is the adaption of such kind of sources in broad ion beam technology. Surface patterning based on self-organized nano-structures on, e.g., semiconductor materials formed by heavy mono- or polyatomic ion irradiation from liquid metal (alloy) ion sources (LMAISs) is a very promising technique. LMAISs are nearly the only type of sources delivering polyatomic ions from about half of the periodic table elements. To overcome the lack of only very small treated areas by applying a focused ion beam equipped with such sources, the technology taken from space propulsion systems was transferred into a large single-end ion implanter. The main component is an ion beam injector based on high current LMAISs combined with suited ion optics allocating ion currents in the μA range in a nearly parallel beam of a few mm in diameter. Different types of LMAIS (needle, porous emitter, and capillary) are presented and characterized. The ion beam injector design is specified as well as the implementation of this module into a 200 kV high current ion implanter operating at the HZDR Ion Beam Center. Finally, the obtained results of large area surface modification of Ge using polyatomic Bi2+ ions at room temperature from a GaBi capillary LMAIS will be presented and discussed.

  3. Experimental Evaluation of a Negative Ion Source for a Heavy Ion Fusion Negative Ion Driver

    International Nuclear Information System (INIS)

    Grisham, L.R.; Hahto, S.K.; Hahto, S.T.; Kwan, J.W.; Leung, K.N.

    2004-01-01

    Negative halogen ions have recently been proposed as a possible alternative to positive ions for heavy ion fusion drivers because electron accumulation would not be a problem in the accelerator, and if desired, the beams could be photo-detached to neutrals. To test the ability to make suitable quality beams, an experiment was conducted at Lawrence Berkeley National Laboratory using chlorine in an RF-driven ion source. Without introducing any cesium (which is required to enhance negative ion production in hydrogen ion sources) a negative chlorine current density of 45 mA/cm 2 was obtained under the same conditions that gave 57 45 mA/cm 2 of positive chlorine, suggesting the presence of nearly as many negative ions as positive ions in the plasma near the extraction plane. The negative ion spectrum was 99.5% atomic chlorine ions, with only 0.5% molecular chlorine, and essentially no impurities. Although this experiment did not incorporate the type of electron suppression technology that i s used in negative hydrogen beam extraction, the ratio of co-extracted electrons to Cl - was as low as 7 to 1, many times lower than the ratio of their mobilities, suggesting that few electrons are present in the near-extractor plasma. This, along with the near-equivalence of the positive and negative ion currents, suggests that the plasma in this region was mostly an ion-ion plasma. The negative chlorine current density was relatively insensitive to pressure, and scaled linearly with RF power. If this linear scaling continues to hold at higher RF powers, it should permit current densities of 100 45 mA/cm 2 , sufficient for present heavy ion fusion injector concepts. The effective ion temperatures of the positive and negative ions appeared to be similar and relatively low for a plasma source

  4. Laser-cooled atomic ions as probes of molecular ions

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Kenneth R.; Viteri, C. Ricardo; Clark, Craig R.; Goeders, James E.; Khanyile, Ncamiso B.; Vittorini, Grahame D. [Schools of Chemistry and Biochemistry, Computational Science and Engineering and Physics, Georgia Institute of Technology, Atlanta, GA 30332 (United States)

    2015-01-22

    Trapped laser-cooled atomic ions are a new tool for understanding cold molecular ions. The atomic ions not only sympathetically cool the molecular ions to millikelvin temperatures, but the bright atomic ion fluorescence can also serve as a detector of both molecular reactions and molecular spectra. We are working towards the detection of single molecular ion spectra by sympathetic heating spectroscopy. Sympathetic heating spectroscopy uses the coupled motion of two trapped ions to measure the spectra of one ion by observing changes in the fluorescence of the other ion. Sympathetic heating spectroscopy is a generalization of quantum logic spectroscopy, but does not require ions in the motional ground state or coherent control of the ion internal states. We have recently demonstrated this technique using two isotopes of Ca{sup +} [Phys. Rev. A, 81, 043428 (2010)]. Limits of the method and potential applications for molecular spectroscopy are discussed.

  5. Efektivitas Pengolahan Air Limbah Batik dengan Cara Kimia dan Biologi

    Directory of Open Access Journals (Sweden)

    Istihanah Nurul Eskani

    2016-04-01

    Full Text Available Kebanyakan industri batik membuang air limbah ke lingkungan tanpa diolah terlebih dahulu dengan alasan keterbatasan tempat, dana dan penguasaan teknologi. Beberapa cara pengolahan air limbah telah dilakukan untuk mengatasi penurunan mutunlingkungan akibat pembuangan air limbah.Telah dilakukan penelitian proses pengolahan air limbah batik secara kimia, biologi aerob dan biologi anaerob. Proses kimia dilaksanakan dengan menambahkan koagulan tawas dan kapur ke dalam air limbah batik. Proses biologi aerob dijalankan dalam reaktor terbuka selama 5 hari, sedang proses biologi anaerob  dijalankan dalam reaktor tertutup selama 12 hari. Hasil proses kemudian diukur parameter warna, COD dan alkalinitasnya.Hasil penelitian pengolahan air limbah batik secara kimia dapat menurunkan parameter warna yang berasal dari zat warna Naphtol sebesar 83,15 %, COD sebesar 28,82% dan pH hasil proses 7. Proses biologi anaerob menurunkan parameter warna sebesar 94,95%, COD sebesar 59,89% dan pH hasil proses 5. Proses biologi aerob dapat menurunkan parameter warna yang berasal dari zat warna Naphtol sebesar 97,82%, COD sebesar 72, 88% dan pH hasil proses 6,5. Sehingga dapat disimpulkan bahwa pengolahan limbah cair batik secara biologi aerob lebih efektif daripada pengolahan secara biologi anaerob maupaun secara kimia. Kata kunci : pengolahan air limbah batik, proses kimia, proses biologi

  6. A novel ion imager for secondary ion mass spectrometry

    International Nuclear Information System (INIS)

    Matsumoto, Kazuya; Miyata, Kenji; Nakamura, Tsutomu

    1993-01-01

    This paper describes a new area detector for secondary ion mass spectrometry (SIMS) ion microscope, and its performance. The operational principle is based on detecting the change in potential of a floating photodiode caused by the ion-induced secondary-electron emission and the incoming ion itself. The experiments demonstrated that 10 1 -10 5 aluminum ions per pixel can be detected with good linear response. Moreover, relative ion sensitivities from hydrogen to lead were constant within a factor of 2. The performance of this area detector provides the potential for detection of kiloelectronvolt ion images with current ion microscopy

  7. MEMBEDAH TEORI SOSIOLOGI: Teori Pertukaran (Exchange Theory George Caspar Homans

    Directory of Open Access Journals (Sweden)

    Wardani Wardani

    2016-05-01

    Full Text Available This article is aimed at analyzing critically George Caspar Homans’s theory of exchange. The critical analysis that may be called here simply as “maping ideology” embodied in theory is needed to place the theory within the specific social and political condition, intellectual background, school of thought having great influence on it, and so forth, and also to assesses its limitedness as a theoretical frame-work of scientific research to explain complicated social phenomenon or human interaction. Influenced by psychological and economic theories, Homans’s theory of exchange has been intended at the beginning by the author as attack against Marxism domination that addressed criticism to capitalism as macro-structure oppressing the proletariat by the ruling class and against Durkheimian structural functionalism. By addressing the attack against Marxism and because of his intellectual and social background, Homans’s theory then has been regarded as an explanation justifying the existing situation. Being attributed as psychological reductionism, as neglecting the important role of structure, and deterministic are some of the objections addressed to his theory.

  8. Perspective on the Role of Negative Ions and Ion-Ion Plasmas in Heavy Ion Fusion Science, Magnetic Fusion Energy,and Related Fields

    International Nuclear Information System (INIS)

    Grisham, L.R.; Kwan, J.W.

    2008-01-01

    Some years ago it was suggested that halogen negative ions could offer a feasible alternative path to positive ions as a heavy ion fusion driver beam which would not suffer degradation due to electron accumulation in the accelerator and beam transport system, and which could be converted to a neutral beam by photodetachment near the chamber entrance if desired. Since then, experiments have demonstrated that negative halogen beams can be extracted and accelerated away from the gas plume near the source with a surviving current density close to what could be achieved with a positive ion of similar mass, and with comparable optical quality. In demonstrating the feasibility of halogen negative ions as heavy ion driver beams, ion - ion plasmas, an interesting and somewhat novel state of matter, were produced. These plasmas, produced near the extractor plane of the sources, appear, based upon many lines of experimental evidence, to consist of almost equal densities of positive and negative chlorine ions, with only a small component of free electrons. Serendipitously, the need to extract beams from this plasma for driver development provides a unique diagnostic tool to investigate the plasma, since each component - positive ions, negative ions, and electrons - can be extracted and measured separately. We discuss the relevance of these observations to understanding negative ion beam extraction from electronegative plasmas such as halogens, or the more familiar hydrogen of magnetic fusion ion sources. We suggest a concept which might improve negative hydrogen extraction by the addition of a halogen. The possibility and challenges of producing ion - ion plasmas with thin targets of halogens or, perhaps, salt, is briefly addressed.

  9. Perspective on the Role of Negative Ions and Ion-Ion Plasmas in Heavy Ion Fusion Science, Magnetic Fusion Energy, and Related Fields

    International Nuclear Information System (INIS)

    Grisham, L.R.; Kwan, J.W.

    2008-01-01

    Some years ago it was suggested that halogen negative ions (1)could offer a feasible alternative path to positive ions as a heavy ion fusion driver beam which would not suffer degradation due to electron accumulation in the accelerator and beam transport system, and which could be converted to a neutral beam by photodetachment near the chamber entrance if desired. Since then, experiments have demonstrated that negative halogen beams can be extracted and accelerated away from the gas plume near the source with a surviving current density close to what could be achieved with a positive ion of similar mass, and with comparable optical quality. In demonstrating the feasibility of halogen negative ions as heavy ion driver beams, ion-ion plasmas, an interesting and somewhat novel state of matter, were produced. These plasmas, produced near the extractor plane of the sources, appear, based upon many lines of experimental evidence, to consist of almost equal densities of positive and negative chlorine ions, with only a small component of free electrons. Serendipitously, the need to extract beams from this plasma for driver development provides a unique diagnostic tool to investigate the plasma, since each component--positive ions, negative ions, and electrons--can be extracted and measured separately. We discuss the relevance of these observations to understanding negative ion beam extraction from electronegative plasmas such as halogens, or the more familiar hydrogen of magnetic fusion ion sources. We suggest a concept which might improve negative hydrogen extraction by the addition of a halogen. The possibility and challenges of producing ion-ion plasmas with thin targets of halogens or, perhaps, salt, is briefly addressed

  10. PENGENDALIAN KUALITAS UNTUK MEMINIMASI PRODUK CACAT PADA PROSES PRODUKSI BESI BETON

    Directory of Open Access Journals (Sweden)

    Tantri Windarti

    2014-09-01

    Full Text Available Untuk menghasilkan produk dengan kualitas yang baik pada era globalisasi saat ini, sebuah industri dituntut untuk memberikan produk yang tidak cacat dan sesuai dengan spesifikasi. PT. X adalah sebuah industri besi beton dengan berbagai macam ukuran diameter. Dalam proses produksinya, PT. X melakukan pengendalian kualitas dengan menetapkan batas maksimum toleransi kerusakan sebesar 2%. Namun, dalam pengendalian kualitas tersebut, masih terdapat produk cacat pada minggu ke-5 dan minggu ke-12 di atas batas toleransi yaitu sebesar 2,42% dan 2,21%. Penyebab kerusakan produk cacat yang terjadi pada besi beton diameter 12 mm didominasi oleh overfill sebanyak 48,97% dan scratch sebanyak 32,93% yang akan dikualifikasikan sebagai Critical To Quality (CTQ. Untuk itu,  metode six sigma ini digunakan dalam upaya meningkatkan kualitas produk besi beton melalui tahap DMAIC (Define, Measure, Analyze, Improve dan Control. Hasil analisis penelitian menunjukkan bahwa setelah menggunakan metode six sigma terjadi penurunan nilai DPMO (Defect Per Million Opportunities sebesar 33,21% dan terjadi peningkatan nilai sigma yang semula 2,96 menjadi 3,17. Faktor penyebab utama terjadinya produk cacat adalah faktor mesin yaitu adanya trouble pada rolling mill, kemudian diikuti faktor manusia dan faktor metode sebagai penyebab lain yang membentuk produk akhir.   Kata kunci:  CTQ; DMAIC; pengendalian kualitas; six sigma   Abstract   To produce products with good quality in era of globalization, an industry is required to provide a product that is not defective and in accordance with the specifications. PT. X is a concrete iron industry with various diameter sizes. In the production process, PT. X performs quality control by setting damage tolerance maximum limit. The maximum limit is 2%. However, in the quality control, there are still defect levels at fifth and twelfth week that over tolerance limit are 2.42% and 2.21%. The causes of products defects that occur at

  11. Design study of primary ion provider for relativistic heavy ion collider electron beam ion source.

    Science.gov (United States)

    Kondo, K; Kanesue, T; Tamura, J; Okamura, M

    2010-02-01

    Brookhaven National Laboratory has developed the new preinjector system, electron beam ion source (EBIS) for relativistic heavy ion collider (RHIC) and National Aeronautics and Space Administration Space Radiation Laboratory. Design of primary ion provider is an essential problem since it is required to supply beams with different ion species to multiple users simultaneously. The laser ion source with a defocused laser can provide a low charge state and low emittance ion beam, and is a candidate for the primary ion source for RHIC-EBIS. We show a suitable design with appropriate drift length and solenoid, which helps to keep sufficient total charge number with longer pulse length. The whole design of primary ion source, as well as optics arrangement, solid targets configuration and heating about target, is presented.

  12. Investigation on the utilization of ZrO2-SiO2 composite microspheres for Sr+2 sorption synthesized via sol-gel method

    International Nuclear Information System (INIS)

    Sert, S.; Tel, H.; Altas, Y.; Eral, M.; Cetinkaya, B.; Inan, S.; Kasap, S.

    2009-01-01

    Multivalence metal ion's oxides and hydro oxides show high adsorption capacity. These are selective to some kind of ions and show thermal, chemical and radiation resistance. Because of these properties they can be used as a adsorbent for radioactive waste management. It is known that the mix oxide's acidic and basic surface sides and textural (surface area, por side and volume) properties related to mix oxide composition. The previously works shown that the ZrO 2 have high adsorption capacity for Sr + 2. Additionally ZrO 2 is used in production of heat resistance materials, glass and ceramic industries due to it's high melting point. Generally inorganic adsorbents which are crystal forms have low surface area. It is needed that the materials have high surface area and appropriate por size to targeted molecules for take inside adsorbent, in the practical adsorption proses. It is thought that the addition of oxide which has high surface area ( SiO 2 etc.) to between material layer increase it's surface area. Some works showed that the silica increase surface area when mixed Ti in materials structure. Sol-jell proses is a method which is show homogen hetero metal oxide bounds distribution and give advantages to prepare multicomponent oxide materials. In this study, ZrO 2 -SiO 2 -TiO 2 composite microspheres were synthesized by sol-gel method. In synthesis proses; peristaltic pump, nozzle-vibrator system and glass column were used. The optimum Sr 2 + adsorption conditions were determined by 'Central Composite Design' (CCD). Thermodynamic parameters related to adsorption such as ΔHo, ΔSo and ΔGo were calculated. The adsorption data have been interpreted in terms of Langmuir, Freundlich and D-R isotherms.

  13. Ion-Beam-Excited Electrostatic Ion Cyclotron Waves

    DEFF Research Database (Denmark)

    Michelsen, Poul; Pécseli, Hans; Juul Rasmussen, Jens

    1976-01-01

    Self-excited electrostatic ion cyclotron waves were observed in an ion-beam-plasma system produced in a DP-operated Q-machine. The frequency of the waves showed the theoretically predicted variation with the magnetic field.......Self-excited electrostatic ion cyclotron waves were observed in an ion-beam-plasma system produced in a DP-operated Q-machine. The frequency of the waves showed the theoretically predicted variation with the magnetic field....

  14. Ion mobilities and ion-atom interaction potentials

    International Nuclear Information System (INIS)

    Gatland, I.R.

    1982-01-01

    The techniques for measuring the mobilities of ions in gases, relating interaction potentials to mobilities, and determining potentials from experimental mobilities are reviewed. Applications are presented for positive alkali ions and negative halogen ions in inert gases. (Auth.)

  15. Low-altitude ion heating with downflowing and upflowing ions

    Science.gov (United States)

    Shen, Y.; Knudsen, D. J.; Burchill, J. K.; Howarth, A. D.; Yau, A. W.; James, G.; Miles, D.; Cogger, L. L.; Perry, G. W.

    2017-12-01

    Mechanisms that energize ions at the initial stage of ion upflow are still not well understood. We statistically investigate ionospheric ion energization and field-aligned motion at very low altitudes (330-730 km) using simultaneous plasma, magnetic field, wave electric field and optical data from the e-POP satellite. The high-time-resolution (10 ms) dataset enables us to study the micro-structures of ion heating and field-aligned ion motion. The ion temperature and field-aligned bulk flow velocity are derived from 2-D ion distribution functions measured by the SEI instrument. From March 2015 to March 2016, we've found 17 orbits (in total 24 ion heating periods) with clear ion heating signatures passing across the dayside cleft or the nightside auroral regions. Most of these events have consistent ion heating and flow velocity characteristics observed from both the SEI and IRM instruments. The perpendicular ion temperature goes up to 4.5 eV within a 2 km-wide region in some cases, in which the Radio Receiver Instrument (RRI) sees broadband extremely low frequency (BBELF) waves, demonstrating significant wave-ion heating down to as low as 350 km. The e-POP Fast Auroral Imager (FAI) and Magnetic Field (MGF) instruments show that many events are associated with active aurora and are within downward current regions. Contrary to what would be expected from mirror-force acceleration of heated ions, the majority of these heating events (17 out of 24) are associated with the core ion downflow rather than upflow. These statistical results provide us with new sights into ion heating and field-aligned flow processes at very low altitudes.

  16. Design and simulation of ion optics for ion sources for production of singly charged ions

    Science.gov (United States)

    Zelenak, A.; Bogomolov, S. L.

    2004-05-01

    During the last 2 years different types of the singly charged ion sources were developed for FLNR (JINR) new projects such as Dubna radioactive ion beams, (Phase I and Phase II), the production of the tritium ion beam and the MASHA mass separator. The ion optics simulations for 2.45 GHz electron cyclotron resonance source, rf source, and the plasma ion source were performed. In this article the design and simulation results of the optics of new ion sources are presented. The results of simulation are compared with measurements obtained during the experiments.

  17. Design and simulation of ion optics for ion sources for production of singly charged ions

    International Nuclear Information System (INIS)

    Zelenak, A.; Bogomolov, S.L.

    2004-01-01

    During the last 2 years different types of the singly charged ion sources were developed for FLNR (JINR) new projects such as Dubna radioactive ion beams, (Phase I and Phase II), the production of the tritium ion beam and the MASHA mass separator. The ion optics simulations for 2.45 GHz electron cyclotron resonance source, rf source, and the plasma ion source were performed. In this article the design and simulation results of the optics of new ion sources are presented. The results of simulation are compared with measurements obtained during the experiments

  18. Crater formation by single ions, cluster ions and ion "showers"

    CERN Document Server

    Djurabekova, Flyura; Timko, Helga; Nordlund, Kai; Calatroni, Sergio; Taborelli, Mauro; Wuensch, Walter

    2011-01-01

    The various craters formed by giant objects, macroscopic collisions and nanoscale impacts exhibit an intriguing resemblance in shapes. At the same time, the arc plasma built up in the presence of sufficiently high electric fields at close look causes very similar damage on the surfaces. Although the plasma–wall interaction is far from a single heavy ion impact over dense metal surfaces or the one of a cluster ion, the craters seen on metal surfaces after a plasma discharge make it possible to link this event to the known mechanisms of the crater formations. During the plasma discharge in a high electric field the surface is subject to high fluxes (~1025 cm-2s-1) of ions with roughly equal energies typically of the order of a few keV. To simulate such a process it is possible to use a cloud of ions of the same energy. In the present work we follow the effect of such a flux of ions impinging the surface in the ‘‘shower’’ manner, to find the transition between the different mechanisms of crater formati...

  19. Single-ion conducting diblock terpolymers for lithium-ion batteries

    Science.gov (United States)

    Morris, Melody; Epps, Thomas H., III

    Block polymer (BP) electrolytes provide an attractive route to overcome the competing constraints of high conductivity and mechanical/thermal stability in lithium-ion batteries through nanoscale self-assembly. For example, macromolecules can be engineered such that one domain conducts lithium ions and the other prevents lithium dendrite formation. Herein, we report on the behavior of a single-ion conducting BP electrolyte that was designed to facilitate the transport of lithium ions. These polymers differ from traditional salt-doped BP electrolytes, which require the addition of a lithium salt to bestow conductivity and typically suffer from substantial counterion motion that reduces efficiency. New single-ion BPs were synthesized, and the nanoscale morphologies were determined using small angle X-ray scattering and transmission electron microscopy. Electrolyte performance was measured using AC impedance spectroscopy and DC polarization, and the results were correlated to nanoscale morphology and ion content. Enhanced physical understanding of single-ion BPs was gained by connecting the ion mobility to the chemistry, chain structure, and ion content of the single-ion BP. These studies can be applied to other charged-neutral block polymers to elucidate the effects of ion content on self-assembly and macroscopic properties.

  20. Enhanced ion acoustic fluctuations and ion outflows

    Directory of Open Access Journals (Sweden)

    F. R. E. Forme

    1999-02-01

    Full Text Available A number of observations showing enhanced ion acoustic echoes observed by means of incoherent scatter radars have been reported in the literature. The received power is extremely enhanced by up to 1 or 2 orders of magnitude above usual values, and it is mostly contained in one of the two ion acoustic lines. This spectral asymmetry and the intensity of the received signal cannot be resolved by the standard analysis procedure and often causes its failure. As a result, and in spite of a very clear spectral signature, the analysis is unable to fit the plasma parameters inside the regions of ion acoustic turbulence. We present European Incoherent Scatter radar (EISCAT observations of large ion outflows associated with the simultaneous occurrence of enhanced ion acoustic echoes. The ion fluxes can reach 1014 m-2 s-1 at 800 km altitude. From the very clear spectral signatures of these echoes, a method is presented to extract estimates of the electron temperature and the ion drift within the turbulent regions. It is shown that the electron gas is strongly heated up to 11 000 K. Also electron temperature gradients of about 0.02 K/m exist. Finally, the estimates of the electron temperature and of the ion drift are used to study the possible implications for the plasma transport inside turbulent regions. It is shown that strong electron temperature gradients cause enhancement of the ambipolar electric field and can account for the observed ion outflows.Key words. Ionosphere (auroral ionosphere; ionosphere · magnetosphere interactions; plasma waves and instabilities.

  1. Ion sources for heavy ion fusion

    International Nuclear Information System (INIS)

    Yu, S.S.; Eylon, S.; Chupp, W.

    1995-09-01

    The development of ion sources for heavy ion fusion will be reported with particular emphasis on a recently built 2 MV injector. The new injector is based on an electrostatic quadrupole configuration, and has produced pulsed K + ions of 950 mA peak from a 6.7 inch curved alumino silicate source. The ion beam has reached 2.3 MV with an energy flatness of ±0.2% over 1 micros. The measured normalized edge emittance of less than 1 π mm-mr is close to the source temperature limit. The design, construction, performance, and comparisons with three-dimensional particle-in-cell simulations will be described

  2. Ion-ion interaction and energy transfer of 4+ transuranium ions in cerium tetrafluoride

    International Nuclear Information System (INIS)

    Liu, G.K.; Beitz, J.V.

    1990-01-01

    Dynamics of excited 5f electron states of the transuranium ions Cm 4+ and Bk 4+ in CeF 4 are compared. Based on time- and wavelength-resolved laser-induced fluorescence, excitation energy transfer processes have been probed. Depending on concentration and electronic energy level structure of the studied 4+ transuranium ion, the dominant energy transfer mechanisms were identified as cross relaxation, exciton-exciton annihilation, and trapping. Energy transfer rates derived from the fitting of the observed fluorescence decays to theoretical models, based on electric multipolar ion-ion interactions, are contrasted with prior studies of 4f states of 3+ lanthanide and 3d states of transition metal ions. 16 refs., 1 tab

  3. Ion beam monitoring

    International Nuclear Information System (INIS)

    McKinney, C.R.

    1980-01-01

    An ion beam analyzer is specified, having an ion source for generating ions of a sample to be analyzed, means for extracting the sample ions, means for focusing the sample ions into a beam, separation means positioned along the ion beam for selectively deflecting species of ions, and means for detecting the selected species of ions. According to the specification, the analyzer further comprises (a) means for disabling at least a portion of the separation means, such that the ion beam from the source remains undeflected; (b) means located along the path of the undeflected ion beam for sensing the sample ions; and (c) enabling means responsive to the sensing means for automatically re-enabling the separation means when the sample ions reach a predetermined intensity level. (author)

  4. Ion acoustic solitons/double layers in two-ion plasma revisited

    International Nuclear Information System (INIS)

    Lakhina, G. S.; Singh, S. V.; Kakad, A. P.

    2014-01-01

    Ion acoustic solitons and double layers are studied in a collisionless plasma consisting of cold heavier ion species, a warm lighter ion species, and hot electrons having Boltzmann distributions by Sagdeev pseudo-potential technique. In contrast to the previous results, no double layers and super-solitons are found when both the heavy and lighter ion species are treated as cold. Only the positive potential solitons are found in this case. When the thermal effects of the lighter ion species are included, in addition to the usual ion-acoustic solitons occurring at M > 1 (where the Mach number, M, is defined as the ratio of the speed of the solitary wave and the ion-acoustic speed considering temperature of hot electrons and mass of the heavier ion species), slow ion-acoustic solitons/double layers are found to occur at low Mach number (M < 1). The slow ion-acoustic mode is actually a new ion-ion hybrid acoustic mode which disappears when the normalized number density of lighter ion species tends to 1 (i.e., no heavier species). An interesting property of the new slow ion-acoustic mode is that at low number density of the lighter ion species, only negative potential solitons/double layers are found whereas for increasing densities there is a transition first to positive solitons/double layers, and then only positive solitons. The model can be easily applicable to the dusty plasmas having positively charged dust grains by replacing the heavier ion species by the dust mass and doing a simple normalization to take account of the dust charge

  5. Negative ion sources

    International Nuclear Information System (INIS)

    Ishikawa, Junzo; Takagi, Toshinori

    1983-01-01

    Negative ion sources have been originally developed at the request of tandem electrostatic accelerators, and hundreds of nA to several μA negative ion current has been obtained so far for various elements. Recently, the development of large current hydrogen negative ion sources has been demanded from the standpoint of the heating by neutral particle beam injection in nuclear fusion reactors. On the other hand, the physical properties of negative ions are interesting in the thin film formation using ions. Anyway, it is the present status that the mechanism of negative ion action has not been so fully investigated as positive ions because the history of negative ion sources is short. In this report, the many mechanisms about the generation of negative ions proposed so far are described about negative ion generating mechanism, negative ion source plasma, and negative ion generation on metal surfaces. As a result, negative ion sources are roughly divided into two schemes, plasma extraction and secondary ion extraction, and the former is further classified into the PIG ion source and its variation and Duoplasmatron and its variation; while the latter into reflecting and sputtering types. In the second half of the report, the practical negative ion sources of each scheme are described. If the mechanism of negative ion generation will be investigated more in detail and the development will be continued under the unified know-how as negative ion sources in future, the development of negative ion sources with which large current can be obtained for any element is expected. (Wakatsuki, Y.)

  6. Experiments on Ion-Ion Plasmas From Discharges

    Science.gov (United States)

    Leonhardt, Darrin; Walton, Scott; Blackwell, David; Murphy, Donald; Fernsler, Richard; Meger, Robert

    2001-10-01

    Use of both positive and negative ions in plasma processing of materials has been shown to be advantageous[1] in terms of better feature evolution and control. In this presentation, experimental results are given to complement recent theoretical work[2] at NRL on the formation and decay of pulsed ion-ion plasmas in electron beam generated discharges. Temporally resolved Langmuir probe and mass spectrometry are used to investigate electron beam generated discharges during the beam on (active) and off (afterglow) phases in a variety of gas mixtures. Because electron-beam generated discharges inherently[3] have low electron temperatures (<0.5eV in molecular gases), negative ion characteristics are seen in the active as well as afterglow phases since electron detachment increases with low electron temperatures. Analysis of temporally resolved plasma characteristics deduced from these measurements will be presented for pure O_2, N2 and Ar and their mixtures with SF_6. Oxygen discharges show no noticeable negative ion contribution during the active or afterglow phase, presumably due to the higher energy electron attachment threshold, which is well above any electron temperature. In contrast, SF6 discharges demonstrate ion-ion plasma characteristics in the active glow and are completely ion-ion in the afterglow. Comparison between these discharges with published cross sections and production mechanisms will also be presented. [1] T.H. Ahn, K. Nakamura & H. Sugai, Plasma Sources Sci. Technol., 5, 139 (1996); T. Shibyama, H. Shindo & Y. Horiike, Plasma Sources Sci. Technol., 5, 254 (1996). [2] See presentation by R. F. Fernsler, at this conference. [3] D. Leonhardt, et al., 53rd Annual GEC, Houston, TX.

  7. Detection of gold cluster ions by ion-to-ion conversion using a CsI-converter

    International Nuclear Information System (INIS)

    Nguyen, V.-T.; Novilkov, A.C.; Obnorskii, V.V.

    1997-01-01

    Gold cluster ions in the m/z range of 10 4 -2 x 10 6 u were produced by bombarding a thin film of gold with 252 Cf-fission fragments. The gold covering a C-Al substrate formed islets having a mean diameter of 44 A. Their size- and mass-distribution was determined by means of electron microscopy. The main task was to measure the m/z distribution of the cluster ions ejected from the sample surface. For this purpose we built a time-of-flight (TOF) mass spectrometer, which could be used as a linear TOF instrument or, alternatively, as a tandem-TOF instrument being equipped with an ion-to-ion converter. Combining the results obtained in both modes, it turned out that the linear TOF instrument equipped with micro-channel plates had a mean detection efficiency for 20 keV cluster ions of about 40%. In the tandem mode, the cluster ions hit a CsI converter with energies of 40z keV (z = charge state), from where secondary ions - mainly Cs + and (CsI) n Cs + cluster ions - were ejected. These ions were used to measure the TOF spectrum of the gold cluster ions. The detection efficiency of the cluster ions was found to vary in the available mass range from 99.7% to 96.5%. The complete mass distribution between 4 x 10 4 and 4 x 10 6 u was determined and compared with the corresponding mass distribution of the gold islets covering the substrate. (orig.)

  8. Highly Stripped Ion Sources for MeV Ion Implantation

    Energy Technology Data Exchange (ETDEWEB)

    Hershcovitch, Ady

    2009-06-30

    Original technical objectives of CRADA number PVI C-03-09 between BNL and Poole Ventura, Inc. (PVI) were to develop an intense, high charge state, ion source for MeV ion implanters. Present day high-energy ion implanters utilize low charge state (usually single charge) ion sources in combination with rf accelerators. Usually, a MV LINAC is used for acceleration of a few rnA. It is desirable to have instead an intense, high charge state ion source on a relatively low energy platform (de acceleration) to generate high-energy ion beams for implantation. This de acceleration of ions will be far more efficient (in energy utilization). The resultant implanter will be smaller in size. It will generate higher quality ion beams (with lower emittance) for fabrication of superior semiconductor products. In addition to energy and cost savings, the implanter will operate at a lower level of health risks associated with ion implantation. An additional aim of the project was to producing a product that can lead to long­ term job creation in Russia and/or in the US. R&D was conducted in two Russian Centers (one in Tomsk and Seversk, the other in Moscow) under the guidance ofPVI personnel and the BNL PI. Multiple approaches were pursued, developed, and tested at various locations with the best candidate for commercialization delivered and tested at on an implanter at the PVI client Axcelis. Technical developments were exciting: record output currents of high charge state phosphorus and antimony were achieved; a Calutron-Bemas ion source with a 70% output of boron ion current (compared to 25% in present state-of-the-art). Record steady state output currents of higher charge state phosphorous and antimony and P ions: P{sup 2+} (8.6 pmA), P{sup 3+} (1.9 pmA), and P{sup 4+} (0.12 pmA) and 16.2, 7.6, 3.3, and 2.2 pmA of Sb{sup 3+} Sb {sup 4 +}, Sb{sup 5+}, and Sb{sup 6+} respectively. Ultimate commercialization goals did not succeed (even though a number of the products like high

  9. Development of focused ion beam systems with various ion species

    International Nuclear Information System (INIS)

    Ji Qing; Leung, K.-N.; King, Tsu-Jae; Jiang Ximan; Appleton, Bill R.

    2005-01-01

    Conventional focused ion beam systems employ a liquid-metal ion source (LMIS) to generate high-brightness beams, such as Ga + beams. Recently there has been an increased need for focused ion beams in areas like biological studies, advanced magnetic-film manufacturing and secondary-ion mass spectroscopy (SIMS). In this article, status of development on focused ion beam systems with ion species such as O 2 + , P + , and B + will be reviewed. Compact columns for forming focused ion beams from low energy (∼3keV), to intermediate energy (∼35keV) are discussed. By using focused ion beams, a SOI MOSFET is fabricated entirely without any masks or resist

  10. Ion colliders

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, W.

    2011-12-01

    Ion colliders are research tools for high-energy nuclear physics, and are used to test the theory of Quantum Chromo Dynamics (QCD). The collisions of fully stripped high-energy ions create matter of a temperature and density that existed only microseconds after the Big Bang. Ion colliders can reach higher densities and temperatures than fixed target experiments although at a much lower luminosity. The first ion collider was the CERN Intersecting Storage Ring (ISR), which collided light ions [77Asb1, 81Bou1]. The BNL Relativistic Heavy Ion Collider (RHIC) is in operation since 2000 and has collided a number of species at numerous energies. The CERN Large Hadron Collider (LHC) started the heavy ion program in 2010. Table 1 shows all previous and the currently planned running modes for ISR, RHIC, and LHC. All three machines also collide protons, which are spin-polarized in RHIC. Ion colliders differ from proton or antiproton colliders in a number of ways: the preparation of the ions in the source and the pre-injector chain is limited by other effects than for protons; frequent changes in the collision energy and particle species, including asymmetric species, are typical; and the interaction of ions with each other and accelerator components is different from protons, which has implications for collision products, collimation, the beam dump, and intercepting instrumentation devices such a profile monitors. In the preparation for the collider use the charge state Z of the ions is successively increased to minimize the effects of space charge, intrabeam scattering (IBS), charge change effects (electron capture and stripping), and ion-impact desorption after beam loss. Low charge states reduce space charge, intrabeam scattering, and electron capture effects. High charge states reduce electron stripping, and make bending and acceleration more effective. Electron stripping at higher energies is generally more efficient. Table 2 shows the charge states and energies in the

  11. Ion colliders

    International Nuclear Information System (INIS)

    Fischer, W.

    2010-01-01

    Ion colliders are research tools for high-energy nuclear physics, and are used to test the theory of Quantum Chromo Dynamics (QCD). The collisions of fully stripped high-energy ions create matter of a temperature and density that existed only microseconds after the Big Bang. Ion colliders can reach higher densities and temperatures than fixed target experiments although at a much lower luminosity. The first ion collider was the CERN Intersecting Storage Ring (ISR), which collided light ions (77Asb1, 81Bou1). The BNL Relativistic Heavy Ion Collider (RHIC) is in operation since 2000 and has collided a number of species at numerous energies. The CERN Large Hadron Collider (LHC) started the heavy ion program in 2010. Table 1 shows all previous and the currently planned running modes for ISR, RHIC, and LHC. All three machines also collide protons, which are spin-polarized in RHIC. Ion colliders differ from proton or antiproton colliders in a number of ways: the preparation of the ions in the source and the pre-injector chain is limited by other effects than for protons; frequent changes in the collision energy and particle species, including asymmetric species, are typical; and the interaction of ions with each other and accelerator components is different from protons, which has implications for collision products, collimation, the beam dump, and intercepting instrumentation devices such a profile monitors. In the preparation for the collider use the charge state Z of the ions is successively increased to minimize the effects of space charge, intrabeam scattering (IBS), charge change effects (electron capture and stripping), and ion-impact desorption after beam loss. Low charge states reduce space charge, intrabeam scattering, and electron capture effects. High charge states reduce electron stripping, and make bending and acceleration more effective. Electron stripping at higher energies is generally more efficient. Table 2 shows the charge states and energies in the

  12. Ion Colliders

    CERN Document Server

    Fischer, W

    2014-01-01

    High-energy ion colliders are large research tools in nuclear physics to study the Quark-Gluon-Plasma (QGP). The range of collision energy and high luminosity are important design and operational considerations. The experiments also expect flexibility with frequent changes in the collision energy, detector fields, and ion species. Ion species range from protons, including polarized protons in RHIC, to heavy nuclei like gold, lead and uranium. Asymmetric collision combinations (e.g. protons against heavy ions) are also essential. For the creation, acceleration, and storage of bright intense ion beams, limits are set by space charge, charge change, and intrabeam scattering effects, as well as beam losses due to a variety of other phenomena. Currently, there are two operating ion colliders, the Relativistic Heavy Ion Collider (RHIC) at BNL, and the Large Hadron Collider (LHC) at CERN.

  13. Production of highly charged ion beams from ECR ion sources

    International Nuclear Information System (INIS)

    Xie, Z.Q.

    1997-09-01

    Electron Cyclotron Resonance (ECR) ion source development has progressed with multiple-frequency plasma heating, higher mirror magnetic fields and better technique to provide extra cold electrons. Such techniques greatly enhance the production of highly charged ions from ECR ion sources. So far at cw mode operation, up to 300 eμA of O 7+ and 1.15 emA of O 6+ , more than 100 eμA of intermediate heavy ions for charge states up to Ar 13+ , Ca 13+ , Fe 13+ , Co 14+ and Kr 18+ , and tens of eμA of heavy ions with charge states to Kr 26+ , Xe 28+ , Au 35+ , Bi 34+ and U 34+ have been produced from ECR ion sources. At an intensity of at least 1 eμA, the maximum charge state available for the heavy ions are Xe 36+ , Au 46+ , Bi 47+ and U 48+ . An order of magnitude enhancement for fully stripped argon ions (I ≥ 60 enA) also has been achieved. This article will review the ECR ion source progress and discuss key requirement for ECR ion sources to produce the highly charged ion beams

  14. Recoil ions

    International Nuclear Information System (INIS)

    Cocke, C.L.; Olson, R.E.

    1991-01-01

    The collision of a fast moving heavy ion with a neutral atomic target can produce very highly charged but slowly moving target ions. This article reviews experimental and theoretical work on the production and use of recoil ions beyond the second ionization state by beams with specific energies above 0.5 MeV/amu. A brief historical survey is followed by a discussion of theoretical approaches to the problem of the removal of many electrons from a neutral target by a rapid, multiply charged projectile. A discussion of experimental techniques and results for total and differential cross sections for multiple ionization of atomic and molecular targets is given. Measurements of recoil energy are discussed. The uses of recoil ions for in situ spectroscopy of multiply charged ions, for external beams of slow, highly charged ions and in ion traps are reviewed. Some possible future opportunities are discussed. (orig.)

  15. IMPLEMENTASI MODEL LEARNING CYCLE “5E” DISERTAI LKS UNTUK MENINGKATKAN AKTIVITAS, KETERAMPILAN PROSES SAINS, DAN HASIL BELAJAR BIOLOGI

    Directory of Open Access Journals (Sweden)

    Ahmad Purwanto

    2014-05-01

    Full Text Available This research aims to implement the model learning cycle "5E" accompanied by worksheets to increase activity, science process skills and student learning outcomes. This model provides student involvement and hands-on experience for students, develop a collaborative manner with the group and share your knowledge with other students. Conclusions of this study is the implementation model of learning cycle "5E" with worksheets may enhance the activity, science process skills, and student learning outcomes of  X8 in the second semester  at senior high school 4th Metro on academic year 2011/2012. The increase can be observed as follows: the activity of reading the literature by 23%, experiment activity (drawing objects of observation by 25%, in a group discussion activity by 23%, the activity of asking questions by 17%, and argues activity by 10%. In the process skills of science students on aspects of the skill increased by 25% using the tool, the object classifies 30%, the cooperation within the group by 22%, delivering the acquisition of 23%. Learning outcomes of students has increased by 4% which is in cycle I of 71% to 75% in cycle II. As for the improvement of pre-survey to cycle II by 56% which is 19% in pre-survey become to 75% in Cycle II.   Kata kunci: model learning cycle "5E" disertai LKS, aktivitas belajar, keterampilan proses sains, hasil belajar

  16. Ion Elevators and Escalators in Multilevel Structures for Lossless Ion Manipulations

    Energy Technology Data Exchange (ETDEWEB)

    Ibrahim, Yehia M.; Hamid, Ahmed M.; Cox, Jonathan T.; Garimella, Venkata BS; Smith, Richard D.

    2017-01-19

    We describe two approaches based upon ion ‘elevator’ and ‘escalator’ components that allow moving ions to different levels in structures for lossless ion manipulations (SLIM). Guided by ion motion simulations we designed elevator and escalator components providing essentially lossless transmission in multi-level designs based upon ion current measurements. The ion elevator design allowed ions to efficiently bridge a 4 mm gap between levels. The component was integrated in a SLIM and coupled to a QTOF mass spectrometer using an ion funnel interface to evaluate the m/z range transmitted as compared to transmission within a level (e.g. in a linear section). Mass spectra for singly-charged ions of m/z 600-2700 produced similar mass spectra for both elevator and straight (linear motion) components. In the ion escalator design, traveling waves (TW) were utilized to transport ions efficiently between two SLIM levels. Ion current measurements and ion mobility (IM) spectrometry analysis illustrated that ions can be transported between TW-SLIM levels with no significant loss of either ions or IM resolution. These developments provide a path for the development of multilevel designs providing e.g. much longer IM path lengths, more compact designs, and the implementation of much more complex SLIM devices in which e.g. different levels may operate at different temperatures or with different gases.

  17. Ion Elevators and Escalators in Multilevel Structures for Lossless Ion Manipulations.

    Science.gov (United States)

    Ibrahim, Yehia M; Hamid, Ahmed M; Cox, Jonathan T; Garimella, Sandilya V B; Smith, Richard D

    2017-02-07

    We describe two approaches based upon ion "elevator" and "escalator" components that allow moving ions to different levels in structures for lossless ion manipulations (SLIM). Guided by ion motion simulations, we designed elevator and escalator components based upon ion current measurements providing essentially lossless transmission in multilevel designs. The ion elevator design allowed ions to efficiently bridge a 4 mm gap between levels. The component was integrated in a SLIM and coupled to a QTOF mass spectrometer using an ion funnel interface to evaluate the m/z range transmitted as compared to transmission within a level (e.g., in a linear section). The analysis of singly charged ions of m/z 600-2700 produced similar mass spectra for both elevator and straight (linear motion) components. In the ion escalator design, traveling waves (TW) were utilized to transport ions efficiently between two SLIM levels. Ion current measurements and ion mobility (IM) spectrometry analysis illustrated that ions can be transported between TW-SLIM levels with no significant loss of either ions or IM resolution. These developments provide a path for the development of multilevel designs providing, e.g., much longer IM path lengths, more compact designs, and the implementation of much more complex SLIM devices in which, e.g., different levels may operate at different temperatures or with different gases.

  18. PENGOLAHAN LIMBAH CAIR INDUSTRI SUSU (Liquid Waste Management in Milk Factory

    Directory of Open Access Journals (Sweden)

    Wagini Wagini

    2002-03-01

    Full Text Available ABSTRAK Telah dilakukan suatu penelitian untuk mengetahui kondisi limbah cair industri susu. hasil penelitian menunjukkan bahwa limbah cair industri susu mengandung zat-zat pencemar dalam tingkat yang membahayakan lingkungan, sehingga limbah cair tersebut perlu didaur ulang. Untuk itu diperlukan suatu instalasi peralatan yang mampu mengolah limbah tersebut. Pada penelitian ini proses pengolahan dilakukan dengan mengkombinasikan proses-proses pengolahan secara Fisika, Kimia dan Biologi. Dengan tahapan proses pengolahan yang dipilih meliputi; Proses equalisasi, proses anaerob, proses aerasi, lumpur aktif, proses sedimentasi, proses koagulasi-flokulasi, proses sedimentasi, proses flotasi, proses pengendapan partikel ringan, proses penyaringan dengan pasir dan arang aktif.    Kualitas air hasil pengolahan dianalisa secara Fisika, Kimia dan Biologi melalui parameter-parameter: suhu, kekeruhan, zat padat tersuspensi, zat padat terlarut, daya hantar listrik, PH, BOD, COD dan jumlah bakteri. Penelitian ini menunjukkan air hasil pengolahan aman untuk dibuang ke lingkungan.   ABSTRACT A research to identify the condition of milk industry liquid waste was conducted. The result showed that the waste contained pollutants at the level the endangered the environment. Therefore, the waste had to be recycled in which a liquid waste treatment installation is needed. In this research, the process of milk industry liquid waste was done by combining processing techniques of physics, chemistry and biology. The processing steps include the processes of equalization, anaerobe, aeration, sedimentation, coagulation-flocculation, sedimentation, flotation, sedimentation, filtering with sand and activated carbon. The water resulted from the processes was analyzed in terms of physical, chemical and biological characteristics e.g. temperature, turbidity, suspended solid, solutes solid, conductivity, pH, BOD, COD and amount of bacteria. This research, shows that the water

  19. Two-dimensional boundary-value problem for ion-ion diffusion

    International Nuclear Information System (INIS)

    Tuszewski, M.; Lichtenberg, A.J.

    1977-01-01

    Like-particle diffusion is usually negligible compared with unlike-particle diffusion because it is two orders higher in spatial derivatives. When the ratio of the ion gyroradius to the plasma transverse dimension is of the order of the fourth root of the mass ratio, previous one-dimensional analysis indicated that like-particle diffusion is significant. A two-dimensional boundary-value problem for ion-ion diffusion is investigated. Numerical solutions are found with models for which the nonlinear partial differential equation reduces to an ordinary fourth-order differential equation. These solutions indicate that the ion-ion losses are higher by a factor of six for a slab geometry, and by a factor of four for circular geometry, than estimated from dimensional analysis. The solutions are applied to a multiple mirror experiment stabilized with a quadrupole magnetic field which generates highly elliptical flux surfaces. It is found that the ion-ion losses dominate the electron-ion losses and that these classical radial losses contribute to a significant decrease of plasma lifetime, in qualitiative agreement with the experimental results

  20. Ion Acceleration by Double Layers with Multi-Component Ion Species

    Science.gov (United States)

    Good, Timothy; Aguirre, Evan; Scime, Earl; West Virginia University Team

    2017-10-01

    Current-free double layers (CFDL) models have been proposed to explain observations of magnetic field-aligned ion acceleration in plasmas expanding into divergent magnetic field regions. More recently, experimental studies of the Bohm sheath criterion in multiple ion species plasma reveal an equilibration of Bohm speeds at the sheath-presheath boundary for a grounded plate in a multipole-confined filament discharge. We aim to test this ion velocity effect for CFDL acceleration. We report high resolution ion velocity distribution function (IVDF) measurements using laser induced fluorescence downstream of a CFDL in a helicon plasma. Combinations of argon-helium, argon-krypton, and argon-xenon gases are ionized and measurements of argon or xenon IVDFs are investigated to determine whether ion acceleration is enhanced (or diminished) by the presence of lighter (or heavier) ions in the mix. We find that the predominant effect is a reduction of ion acceleration consistent with increased drag arising from increased gas pressure under all conditions, including constant total gas pressure, equal plasma densities of different ions, and very different plasma densities of different ions. These results suggest that the physics responsible for acceleration of multiple ion species in simple sheaths is not responsible for the ion acceleration observed in these expanding plasmas. Department of Physics, Gettysburg College.

  1. SISTEM VERIFIKASI ONLINE MENGGUNAKAN BIOMETRIKA WAJAH

    Directory of Open Access Journals (Sweden)

    I Nyoman Piarsa

    2010-07-01

    Full Text Available Sistem verifikasi online menggunakan biometrika wajah adalah sebuah sistem kontrol keamanan akses webyang menggunakan biometrika wajah. Sistem verifikasi bertujuan untuk menerima atau menolak identitas yangdiklaim oleh seseorang. Sistem ini dibagi dalam dua proses penting yaitu proses pendaftaran dan proses pengenalan.Proses pendaftaran adalah proses dimana seorang pengguna mendaftarkan dirinya dalam suatu web dan kemudianmelakukan pendaftaran wajah, data wajah yang telah terdaftar akan digunakan untuk proses selanjutnya yaitu prosespengenalan. Proses pedaftaran wajah menggunakan pendeteksian wajah yang menggunakan library OpenCV. Prosesverifikasi menggunakan sistem pengenalan yang menggunakan metode Eigenface.Hasil dari penelitian ini didapatkan bahwa, biometrika dapat diterapkan dan digunakan sebagai sistemverifikasi yang berbasiskan web secara online. Metode eigenface dalam proses pengenalan dapat digunakan sebagaisistem keamanan tambahan dengan menggunakan nilai ambang 1,2 dan penggunaan 4 eigenface. Pemilihan nilaiambang dan eigenface dapat disesuaikan dengan kebutuhan keamanan yang diinginkan. Nilai ambang danpenggunaan eigenface bersifat berlawanan arah dimana semakin kecil nilai ambang dan semakin besar penggunaaneigenface maka keakuratan sistem semakin akurat, dan sebaliknya sistem keakuratan sistem menjadi berkurang.

  2. A singly charged ion source for radioactive 11C ion acceleration

    Science.gov (United States)

    Katagiri, K.; Noda, A.; Nagatsu, K.; Nakao, M.; Hojo, S.; Muramatsu, M.; Suzuki, K.; Wakui, T.; Noda, K.

    2016-02-01

    A new singly charged ion source using electron impact ionization has been developed to realize an isotope separation on-line system for simultaneous positron emission tomography imaging and heavy-ion cancer therapy using radioactive 11C ion beams. Low-energy electron beams are used in the electron impact ion source to produce singly charged ions. Ionization efficiency was calculated in order to decide the geometric parameters of the ion source and to determine the required electron emission current for obtaining high ionization efficiency. Based on these considerations, the singly charged ion source was designed and fabricated. In testing, the fabricated ion source was found to have favorable performance as a singly charged ion source.

  3. Ion microprobes

    International Nuclear Information System (INIS)

    Coles, J.N.; Long, J.V.P.

    1977-01-01

    An ion microprobe is described that has an ion extraction arrangement comprising two separate paths for ions and electrons diverging from a common point. A cone shaped or pyramidal guard electrode surrounds each path the apex angles being equal and coinciding with the said point. The guard electrodes are positioned to lie tangentially to each other and to a planar surface including the said point. An aperture is provided for the two paths at the apexes of both guard electrodes, and electrical connections between the guard electrodes enable the same potential to be applied to both guard electrodes. Means are provided for generating oppositely polarised electric fields within the guard electrodes, together with means for causing a focused ion beam to strike the common point without suffering astigmatism. The means for causing a focused ion beam to strike the said point includes an ion gun for directing an ion beam along one of the paths and means to provide an axial accelerating field there along. Optical viewing means are also provided. Existing designs enable only ions or electrons, but not both, to be extracted at any one time. (U.K.)

  4. Ion acoustic waves in one- and two-negative ion species plasmas

    International Nuclear Information System (INIS)

    Ichiki, Ryuta; Shindo, Masako; Yoshimura, Shinji; Watanabe, Tsuguhiro; Kawai, Yoshinobu

    2001-01-01

    Ion acoustic waves in multi-ion plasmas including two negative ion species are investigated both numerically and experimentally. Numerically, the kinetic dispersion relation in two-negative ion plasmas is investigated. There are three modes of the ion acoustic waves in two-negative ion plasmas. In an Ar + -F - -SF 6 - plasma, only one of the three modes is dominant, regardless of the values of the electron and the ion temperatures. In a Xe + -F - -SF 6 - plasma, on the other hand, two modes can be important for a certain range of the electron-ion temperature ratio. The results also imply the possibility of the coexistence of the fast mode and the slow mode in one-negative ion plasmas. Experimentally, ion acoustic waves are observed in an Ar + -F - -SF 6 - plasma and are found to show a mode transition that agrees with the theoretical prediction for one of the three ion acoustic modes

  5. Fusion at counterstreaming ion beams - ion optic fusion (IOF)

    International Nuclear Information System (INIS)

    Gryzinski, M.

    1981-01-01

    The results of investigation are briefly reviewed in the field of ion optic fusion performed at the Institute of Nuclear Research in Swierk. The ion optic fusion concept is based on the possibility of obtaining fusion energy at highly ordered motion of ions in counterstreaming ion beams. For this purpose TW ion beams must be produced and focused. To produce dense and charge-neutralized ion beams the selective conductivity and ballistic focusing ideas were formulated and used in a series of RPI devices with low-pressure cylindrical discharge between grid-type electrodes. 100 kA, 30 keV deuteron beams were successfully produced and focused into the volume of 1 cm 3 , yielding 10 9 neutrons per 200 ns shot on a heavy ice target. Cylindrically convergent ion beams with magnetic anti-defocusing were proposed in order to reach a positive energy gain at reasonable energy level. (J.U.)

  6. Ions kinematics in an electrostatic ion beam trap

    Energy Technology Data Exchange (ETDEWEB)

    Attia, D

    2004-06-01

    In this study, I have tried to provide a better understanding of the dynamics of ions inside an electrostatic ion beam trap. The electrostatic ion trap allows to store ions moving between two electrostatic mirrors. Although the trap has been developed already seven years ago, no direct measurement of the transversal velocity distribution of the ions has been performed. Such quantity is central for understanding the conditions under which a beam should be produced (mainly emittance) in order to be trapped by such a device. The data I have obtained during the course of this work are based on an experimental technique which relies on the direct imaging of the particles exiting the trap, as well as on numerical simulations of the ion trajectories inside the trap. I have personally been involved in the hardware development of the imaging system, the data acquisition and analysis of the data as well as il all numerical calculations presented here. These results allow us to obtain, for the first time, experimental information on the transverse phase space of the trap, and contribute to the overall understanding of the ion motion in this system. (author)

  7. Ion temperature via laser scattering on ion Bernstein waves

    International Nuclear Information System (INIS)

    Wurden, G.A.; Ono, M.; Wong, K.L.

    1981-10-01

    Hydrogen ion temperature has been measured in a warm toroidal plasma with externally launched ion Bernstein waves detected by heterodyne CO 2 laser scattering. Radial scanning of the laser beam allows precise determination of k/sub perpendicular to/ for the finite ion Larmor radius wave (ω approx. less than or equal to 2Ω/sub i/). Knowledge of the magnetic field strength and ion concentration then give a radially resolved ion temperature from the dispersion relation. Probe measurements and Doppler broadening of ArII 4806A give excellent agreement

  8. Diffuse ions produced by electromagnetic ion beam instabilities

    International Nuclear Information System (INIS)

    Winske, D.; Leroy, M.M.

    1984-01-01

    The evolution of the electromagnetic ions beam instability driven by the reflected ion component backstreaming away from the earth's how shock into the foreshock region is studied by means computer simulation. The linear the quasi-linear states of the instability are found to be in good agreement with known results for the resonant model propagating parallel to the beam along the magnetic field and with theory developed in this paper for the nonresonant mode, which propagates antiparallel to the beam direction. The quasi-linear stage, which produces large amplitude 8Bapprox.B, sinusoidal transverse waves and ''intermediate'' ion distribution, is terminated by a nonlinear phase in which strongly nonlinear, compressive waves and ''diffuse'' ion distributions are produced. Additional processes by which the diffuse ions are accelerated to observed high energies are not addressed. The results are discussed in terms of the ion distributions and hydromagnetic waves observed in the foreshock of the earth's bow shock and of interplanetary shocks

  9. Production of highly ionized recoil ions in heavy ion impact

    International Nuclear Information System (INIS)

    Tawara, H.; Tonuma, T.; Be, S.H.; Shibata, H.; Kase, M.; Kambara, T.; Kumagai, H.; Kohno, I.

    1985-01-01

    The production mechanisms of highly ionized recoil ions in energetic, highly charged heavy ion impact are compared with those in photon and electron impact. In addition to the innershell ionization processes which are important in photon and electron impact, the electron transfer processes are found to play a key role in heavy ion impact. In molecular targets are also observed highly ionized monoatomic ions which are believed to be produced through production of highly ionized molecular ions followed by prompt dissociation. The observed N 6+ ions produced in 1.05MeV/amu Ar 12+ ions on N 2 molecules are produced through, for example, N 2 12+ *→N 6+ +N 6+ process. (author)

  10. Ion optics in an ion source system

    Energy Technology Data Exchange (ETDEWEB)

    Abdel-Salam, F W; Moustafa, O A; El-Khabeary, H [Accelerators Dept, Nuclear Research Center, Atomic Energy Authority, Cairo (Egypt)

    1997-12-31

    An analysis of ion beams from an ion source which consisted of a hemispherical anode, a plane earthed cathode, and a focusing electrode has been carried out. The focal properties of such electrode arrangement were studied using axially symmetric fields. Axial and radial electric fields were obtained as functions of the axial distance. It was found that the radial component of the gradient of potential pushes the ions towards the axis, which indicates the convergent action of the system. The effect of voltage variation between the boundary and the focusing electrode on the position of the plasma boundary are given using the experimental data of the ion source characteristics and its geometrical parameters. The advantages of plasma diffusing outside the source through a small aperture were used by applying a potential to the focusing electrode. It was possible to extract a large ion current from the expanded plasma. The system constituted a lens with a focal length of 29.4 mm. 7 figs.

  11. Heavy ion beams from the new Hungarian ECR ion source

    International Nuclear Information System (INIS)

    Biri, S.; Valek, A.; Ditroi, F.; Koivisto, H.; Arje, J.; Stiebing, K.; Schmidt, L.

    1998-01-01

    The first beams of highly charged ions in Hungary were obtained in fall of 1996. The new 14.5 GHz ECR ion source of ATOMKI produced beams of multiply charged ions with remarkable intensities at first experiments. Since then, numerous further developments were carried out. An external electrondonor electrode drastically increased the plasma density and, consequently, the intensity of highly charged ions. These upgrades concentrated mainly on beams from gaseous elements and were carried out by the ECRIS team of ATOMKI. Another series of experiments - ionising from solids - however, was done in the framework of an international collaboration. The first metal ion beam has been extracted from the ECRIS in November 1997 using the known method of Metal Ions from Volatile Compounds (MIVOC). The possibility to put the MIVOC chamber inside the ion source was also tested and the dosing regulation problem of metal vapours inside the ion source was solved. As a result, beams of more than 10 μA of highly charged Fe and Ni ions were produced. (author)

  12. A Study of Ion-Ion Hybrid Instability in the Mixed Plasma

    Directory of Open Access Journals (Sweden)

    Soo-Yong Kim

    1987-12-01

    Full Text Available There are more oxygen ions than hydrogen ions in the auroral field zone. We consider both analytic and numerical simulation study of the heating of hydrogen and oxygen ions by auroral electrons. With the low drift speed of electron beams, the ion-ion hybrid wave becomes unstable instead of the lower hybrid wave so that a preferential heating of oxygen ions occurs.

  13. Heavy-ion radiography

    International Nuclear Information System (INIS)

    Fabrikant, J.I.; Tobias, C.A.; Holley, W.R.; Benton, E.V.; Woodruff, K.H.; MacFarland, E.W.

    1983-01-01

    High energy, heavy-ion beams offer superior discrimination of tissue electron densities at very low radiation doses. This characteristic has potential for diagnostic medical imaging of neoplasms arising in the soft tissues and organs because it can detect smaller inhomogeneities than x rays. Heavy-ion imaging may also increase the accuracy of cancer radiotherapy planning involving use of accelerated charged particles. In the current physics research program of passive heavy-ion imaging, critical modulation transfer function tests are being carried out in heavy-ion projection radiography and heavy-ion computerized tomography. The research goal is to improve the heavy-ion imaging method until it reaches the limits of its theoretical resolution defined by range straggling, multiple scattering, and other factors involved in the beam quality characteristics. Clinical uses of the imaging method include the application of heavy-ion computerized tomography to heavy-ion radiotherapy planning, to the study of brain tumors and other structures of the head, and to low-dose heavy-ion projection mammography, particularly for women with dense breasts where other methods of diagnosis fail. The ions used are primarily 300 to 570 MeV/amu carbon and neon ions accelerated at the Lawrence Berkeley Laboratory Bevalac

  14. Ion channels versus ion pumps: the principal difference, in principle.

    Science.gov (United States)

    Gadsby, David C

    2009-05-01

    The incessant traffic of ions across cell membranes is controlled by two kinds of border guards: ion channels and ion pumps. Open channels let selected ions diffuse rapidly down electrical and concentration gradients, whereas ion pumps labour tirelessly to maintain the gradients by consuming energy to slowly move ions thermodynamically uphill. Because of the diametrically opposed tasks and the divergent speeds of channels and pumps, they have traditionally been viewed as completely different entities, as alike as chalk and cheese. But new structural and mechanistic information about both of these classes of molecular machines challenges this comfortable separation and forces its re-evaluation.

  15. Note: Ion source design for ion trap systems

    Science.gov (United States)

    Noriega, J. R.; Quevedo, M.; Gnade, B.; Vasselli, J.

    2013-06-01

    A small plasma (glow discharge) based ion source and circuit are described in this work. The ion source works by producing a high voltage pulsed discharge between two electrodes in a pressure range of 50-100 mTorr. A third mesh electrode is used for ion extraction. The electrodes are small stainless steel screws mounted in a MACOR ionization chamber in a linear arrangement. The electrode arrangement is driven by a circuit, design for low power operation. This design is a proof of concept intended for applications on small cylindrical ion traps.

  16. High-ion temperature experiments with negative-ion-based NBI in LHD

    International Nuclear Information System (INIS)

    Takeiri, Y.; Morita, S.; Tsumori, K.; Ikeda, K.; Oka, Y.; Osakabe, M.; Nagaoka, K.; Goto, M.; Miyazawa, J.; Masuzaki, S.; Ashikawa, N.; Yokoyama, M.; Narihara, K.; Yamada, I.; Kubo, S.; Shimozuma, T.; Inagaki, S.; Tanaka, K.; Peterson, B.J.; Ida, K.; Kaneko, O.; Komori, A.; Murakami, S.

    2005-01-01

    High-Z plasmas have been produced with Ar- and/or Ne-gas fuelling to increase the ion temperature in the LHD plasmas heated with the high-energy negative-ion-based NBI. Although the electron heating is dominant in the high-energy NBI heating, the direct ion heating power is much enhanced effectively in low-density plasmas due to both an increase in the beam absorption (ionisation) power and a reduction of the ion density in the high-Z plasmas. Intensive Ne- and/or Ar-glow discharge cleaning works well to suppress dilution of the high-Z plasmas with the wall-absorbed hydrogen. As a result, the ion temperature increases with an increase in the ion heating power normalized by the ion density, and reaches 10 keV. An increase in the ion temperature is also observed with an addition of the centrally focused ECRH to the low-density and high-Z NBI plasma, suggesting improvement of the ion transport. The results obtained in the high-Z plasma experiments with the high-energy NBI heating indicate that an increase in the direct ion heating power and improvement of the ion transport are essential to the ion temperature rise, and that a high-ion temperature would be obtained as well in hydrogen plasmas with low-energy positive-NBI heating which is planed in near future in LHD. (author)

  17. Single ion hit detection set-up for the Zagreb ion microprobe

    Science.gov (United States)

    Smith, R. W.; Karlušić, M.; Jakšić, M.

    2012-04-01

    Irradiation of materials by heavy ions accelerated in MV tandem accelerators may lead to the production of latent ion tracks in many insulators and semiconductors. If irradiation is performed in a high resolution microprobe facility, ion tracks can be ordered by submicrometer positioning precision. However, full control of the ion track positioning can only be achieved by a reliable ion hit detection system that should provide a trigger signal irrespectively of the type and thickness of the material being irradiated. The most useful process that can be utilised for this purpose is emission of secondary electrons from the sample surface that follows the ion impact. The status report of the set-up presented here is based on the use of a channel electron multiplier (CEM) detector mounted on an interchangable sample holder that is inserted into the chamber in a close geometry along with the sample to be irradiated. The set-up has been tested at the Zagreb ion microprobe for different ions and energies, as well as different geometrical arrangements. For energies of heavy ions below 1 MeV/amu, results show that efficient (100%) control of ion impact can be achieved only for ions heavier than silicon. The successful use of the set-up is demonstrated by production of ordered single ion tracks in a polycarbonate film and by monitoring fluence during ion microbeam patterning of Foturan glass.

  18. Heavy-ion radiography and heavy-ion computed tomography

    International Nuclear Information System (INIS)

    Fabrikant, J.I.; Holley, W.R.; McFarland, E.W.; Tobias, C.a.

    1982-02-01

    Heavy-ion projection and CT radiography is being developed into a safe, low-dose, noninvasive radiological procedure that can quantitate and image small density differences in human tissues. The applications to heavy-ion mammography and heavy-ion CT imaging of the brain in clinical patients suggest their potential value in cancer diagnosis

  19. Studying the prose style of Dastgiri Rules

    Directory of Open Access Journals (Sweden)

    Tahereh Mirzaei

    2016-12-01

    nature of the letters and its three types which are written, verbal and masrouri. In chapter4 he explained about the letters in detail including metaphor letter, conjunction letter, conditioning letter and so on. Finally, he stated infinitive constructions, the names of Allah in Persian and specific names of kings and volume I ends in this way. The prose style of this manuscript can be studied from the formal and content point of view. Examining stylistic features of Dastgiri Rules first of all indicates literary knowledge of the author, his awareness of Persian grammar and dictionaries during his time. Although this work, like other grammarians works in the subcontinent, is written in Arabic language style, but in many cases he observed moderation and have applied Persian language syntax. In formal Stylistics of the book, abundance of Arabic words is seen which was influenced by the common literary style of return period. Special use of some Arabic words and combination of Persian and Arabic words in the syntactic structure of sentences are also noteworthy. These combinations are mostly simple, short and literary. Compound verbs have been applied more than simple and prefix verbs. Orthography of this manuscript was influenced by the common style of these periods, which are eleventh to the thirteenth century. In this work some cases like writing the letter of "ک" instead of "گ", and the letter of "ج" instead of "چ", inarticulate omission when making plural, use of "مَر" for putting emphasis on object and application of "را" as object sign can be seen. The pros style of this work is simple and scientific except the introduction, however the author shows us his literary talent and ability by applying literary figures of speech everywhere in his work including rhyme and pun, symmetry, simile, metaphor and metonymy which are applied very artistically in the introduction. The author's great attention to mention poems by Persian and Hindi poets indicates his admirable

  20. Study of the processes of ion pairs formation by the method of ion-ion coincidence: I2 and chlorine-containing hydrocarbons

    International Nuclear Information System (INIS)

    Golovin, A.V.

    1991-01-01

    A method of ion-ion coincidences was suggested to study the process of ion pairs formation during molecule photoionization. The principle of action of ion-ion coincidence method is based on recording of only the negative and positive ions that formed as a result of a molecule decomposition. The flowsheet of the facility of ion-ion coincidences was presented. The processes of ion pairs formation in iodine, chloroform, propyl-, n-propenyl-, tert.butyl- and benzyl-chlorides were studied. A simple model permitting to evaluate the dependence of quantum yield of ion pair formation on excitation energy was suggested

  1. High current vacuum arc ion source for heavy ion fusion

    International Nuclear Information System (INIS)

    Qi, N.; Schein, J.; Gensler, S.; Prasad, R.R.; Krishnan, M.; Brown, I.

    1999-01-01

    Heavy Ion fusion (HIF) is one of the approaches for the controlled thermonuclear power production. A source of heavy ions with charge states 1+ to 2+, in ∼0.5 A current beams with ∼20 micros pulse widths and ∼10 Hz repetition rates are required. Thermionic sources have been the workhorse for the HIF program to date, but suffer from sloe turn-on, heating problems for large areas, are limited to low (contact) ionization potential elements and offer relatively low ion fluxes with a charge state limited to 1+. Gas injection sources suffer from partial ionization and deleterious neutral gas effects. The above shortcomings of the thermionic ion sources can be overcome by a vacuum arc ion source. The vacuum arc ion source is a good candidate for HIF applications. It is capable of providing ions of various elements and different charge states, in short and long pulse bursts, with low emittance and high beam currents. Under a Phase-I STTR from DOE, the feasibility of the vacuum arc ion source for the HIF applications is investigated. An existing ion source at LBNL was modified to produce ∼0.5 A, ∼60 keV Gd (A∼158) ion beams. The experimental effort concentrated on beam noise reduction, pulse-to-pulse reproducibility and achieving low beam emittance at 0.5 A ion current level. Details of the source development will be reported

  2. Cs+ ion source for secondary ion mass spectrometry

    International Nuclear Information System (INIS)

    Bentz, B.L.; Weiss, H.; Liebl, H.

    1981-12-01

    Various types of cesium ionization sources currently used in secondary ion mass spectrometry are briefly reviewed, followed by a description of the design and performance of a novel, thermal surface ionization Cs + source developed in this laboratory. The source was evaluated for secondary ion mass spectrometry applications using the COALA ion microprobe mass analyzer. (orig.)

  3. Practical aspects of trapped ion mass spectrometry, 5 applications of ion trapping devices

    CERN Document Server

    March, Raymond E

    2009-01-01

    Examines ion/neutral and ion/ion reactions, ion spectroscopy, and the structural characterization of proteins and peptides using quadropole ion trap mass spectrometry, Fourier transform - ion cyclotron resonance (FT-ICR) mass spectrometry, and traveling wave ion mobility mass spectrometry.

  4. Laser ion sources

    Energy Technology Data Exchange (ETDEWEB)

    Bykovskij, Yu

    1979-02-01

    The characteristics a laser source of multiply-ionized ions are described with regard to the interaction of laser radiation and matter, ion energy spectrum, angular ion distribution. The amount of multiple-ionization ions is evaluated. Out of laser source applications a laser injector of multiple-ionization ions and nuclei, laser mass spectrometry, laser X-ray microradiography, and a laser neutron generators are described.

  5. Compact RF ion source for industrial electrostatic ion accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Hyeok-Jung, E-mail: hjkwon@kaeri.re.kr; Park, Sae-Hoon; Kim, Dae-Il; Cho, Yong-Sub [Korea Multi-purpose Accelerator Complex, Korea Atomic Energy Research Institute, Gyeongsangbukdo 38180 (Korea, Republic of)

    2016-02-15

    Korea Multi-purpose Accelerator Complex is developing a single-ended electrostatic ion accelerator to irradiate gaseous ions, such as hydrogen and nitrogen, on materials for industrial applications. ELV type high voltage power supply has been selected. Because of the limited space, electrical power, and robust operation, a 200 MHz RF ion source has been developed. In this paper, the accelerator system, test stand of the ion source, and its test results are described.

  6. Compact RF ion source for industrial electrostatic ion accelerator

    Science.gov (United States)

    Kwon, Hyeok-Jung; Park, Sae-Hoon; Kim, Dae-Il; Cho, Yong-Sub

    2016-02-01

    Korea Multi-purpose Accelerator Complex is developing a single-ended electrostatic ion accelerator to irradiate gaseous ions, such as hydrogen and nitrogen, on materials for industrial applications. ELV type high voltage power supply has been selected. Because of the limited space, electrical power, and robust operation, a 200 MHz RF ion source has been developed. In this paper, the accelerator system, test stand of the ion source, and its test results are described.

  7. Programmable ion mobility spectrometer: Time resolution improvement and ion counter comparison

    International Nuclear Information System (INIS)

    Harrison, R.G.; Wilding, R.J.

    2005-01-01

    Atmospheric ion mobility spectrometers operating on the aspirated electrode principle require switching of a bias voltage to select ions of different mobility. The ion spectrum can be obtained by sweeping across a set of bias voltages. If rapid temporal changes in atmospheric ion spectra are to be measured, however, such as for a balloon-carried instrument, the sweep time across the ion spectrum must be kept short. As bias voltage steps can generate saturation in the mobility spectrometer's electrometer amplifier, the electrometer recovery time limits the ion mobility spectrum sweep rate. Here, active compensation of the charge injected at a bias voltage step is used to reduce the saturation time. Further, the optimal setting of the charge compensation circuitry provides a determination of the system capacitance, a necessary calibration parameter for absolute measurements. Using laboratory air, hourly variations in ion concentrations and air conductivity found using the voltage switching system were similar to those obtained with a traditional ion counter operating at a single mobility: ion growth, however, could only be detected using the ion spectrometer

  8. Development of ion-acoustic double layers through ion-acoustic fluctuations

    International Nuclear Information System (INIS)

    Sekar, A.N.; Saxena, Y.C.

    1985-01-01

    Experimental results on the formation of ion acoustic double layers resembling asymmetric ion-holes are presented. In a double plasma device, modified suitably to inject electron beam into the target plasma, modulation of the beam through step potential leads to excitation of ion-acoustic fluctuation. The ion-acoustic fluctuation, growing away from the grids separating source and target plasmas, developed into weak asymmetric ion-acoustic double layer. The observations are in qualitative agreement with theoretical models and computer simulations. (author)

  9. A laser ablation ion source for the FRS ion catcher

    Energy Technology Data Exchange (ETDEWEB)

    Rink, Ann-Kathrin; Ebert, Jens; Petrick, Martin; Reiter, Pascal [Justus Liebig Universitaet Giessen (Germany); Dickel, Timo; Geissel, Hans; Plass, Wolfgang; Scheidenberger, Christoph [Justus Liebig Universitaet Giessen (Germany); GSI, Darmstadt (Germany); Purushothamen, Sivaji [GSI, Darmstadt (Germany)

    2013-07-01

    The FRS Ion Catcher was developed to serve as test bench for the low energy branch of the Super FRS to slow down exotic nuclei and prepare them for further measurements/ experiments. It consists of a cryogenic stopping cell to thermalise the ions, a diagnostic unit for stopping cell characterisation and various radiofrequency quadrupole structures to guide the ions to the Multiple-Reflection Time-of-Flight Mass Spectrometer for mass measurements, α spectroscopy and isobar separation. To characterise the extraction times of the stopping cell, which is one of the main performance parameters of such a cell, a laser ablation ion source has been develped and tested. This ion source provides a sharply defined starting point of the ions for the extraction time measurement. In the future this source will provide reference ions to calibrate the mass spectrometer for accurate mass measurements.

  10. Ions and light

    CERN Document Server

    Bowers, Michael T

    2013-01-01

    Gas Phase Ion Chemistry, Volume 3: Ions and Light discusses how ions are formed by electron impact, ion-molecule reactions, or electrical discharge. This book discusses the use of light emitted by excited molecules to characterize either the chemistry that formed the excited ion, the structure of the excited ion, or both.Organized into 10 chapters, this volume begins with an overview of the extension of the classical flowing afterglow technique to include infrared and chemiluminescence and laser-induced fluorescence detection. This text then examines the experiments involving molecules that ar

  11. Heavy Ion Injection Into Synchrotrons, Based On Electron String Ion Sources

    CERN Document Server

    Donets, E E; Syresin, E M

    2004-01-01

    A possibility of heavy ions injection into synchrotrons is discussed on the base of two novel ion sources, which are under development JINR during last decade: 1) the electron string ion source (ESIS), which is a modified version of a conventional electron beam ion source (EBIS), working in a reflex mode of operation, and 2) the tubular electron string ion source (TESIS). The Electron String Ion Source "Krion-2" (VBLHE, JINR, Dubna) with an applied confining magnetic field of 3 T was used for injection into the superconducting JINR synchrotron - Nuclotron and during this runs the source provided a high pulse intensity of the highly charged ion beams: Ar16+

  12. Influence of nonelectrostatic ion-ion interactions on double-layer capacitance

    Science.gov (United States)

    Zhao, Hui

    2012-11-01

    Recently a Poisson-Helmholtz-Boltzmann (PHB) model [Bohinc , Phys. Rev. EPLEEE81539-375510.1103/PhysRevE.85.031130 85, 031130 (2012)] was developed by accounting for solvent-mediated nonelectrostatic ion-ion interactions. Nonelectrostatic interactions are described by a Yukawa-like pair potential. In the present work, we modify the PHB model by adding steric effects (finite ion size) into the free energy to derive governing equations. The modified PHB model is capable of capturing both ion specificity and ion crowding. This modified model is then employed to study the capacitance of the double layer. More specifically, we focus on the influence of nonelectrostatic ion-ion interactions on charging a double layer near a flat surface in the presence of steric effects. We numerically compute the differential capacitance as a function of the voltage under various conditions. At small voltages and low salt concentrations (dilute solution), we find out that the predictions from the modified PHB model are the same as those from the classical Poisson-Boltzmann theory, indicating that nonelectrostatic ion-ion interactions and steric effects are negligible. At moderate voltages, nonelectrostatic ion-ion interactions play an important role in determining the differential capacitance. Generally speaking, nonelectrostatic interactions decrease the capacitance because of additional nonelectrostatic repulsion among excess counterions inside the double layer. However, increasing the voltage gradually favors steric effects, which induce a condensed layer with crowding of counterions near the electrode. Accordingly, the predictions from the modified PHB model collapse onto those computed by the modified Poisson-Boltzmann theory considering steric effects alone. Finally, theoretical predictions are compared and favorably agree with experimental data, in particular, in concentrated solutions, leading one to conclude that the modified PHB model adequately predicts the diffuse

  13. Ion beam modification of solids ion-solid interaction and radiation damage

    CERN Document Server

    Wesch, Werner

    2016-01-01

    This book presents the method of ion beam modification of solids in realization, theory and applications in a comprehensive way. It provides a review of the physical basics of ion-solid interaction and on ion-beam induced structural modifications of solids. Ion beams are widely used to modify the physical properties of materials. A complete theory of ion stopping in matter and the calculation of the energy loss due to nuclear and electronic interactions are presented including the effect of ion channeling. To explain structural modifications due to high electronic excitations, different concepts are presented with special emphasis on the thermal spike model. Furthermore, general concepts of damage evolution as a function of ion mass, ion fluence, ion flux and temperature are described in detail and their limits and applicability are discussed. The effect of nuclear and electronic energy loss on structural modifications of solids such as damage formation, phase transitions and amorphization is reviewed for ins...

  14. A Study on the Ion Beam Extraction using Duo-PiGatron Ion source for Vertical Type Ion Beam Facility

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Bom Sok; Lee, Chan young; Lee, Jae Sang [KAERI, Daejeon (Korea, Republic of)

    2015-05-15

    In Korea Multipurpose Accelerator Complex (KOMAC), we have started ion beam service in the new beam utilization building since March this year. For various ion beam irradiation services, we are developed implanters such as metal (150keV/1mA), gaseous (200keV/5mA) and high current ion beam facility (20keV/150mA). One of the new one is a vertical type ion beam facility without acceleration tube (60keV/20mA) which is easy to install the sample. After the installation is complete, it is where you are studying the optimal ion beam extraction process. Detailed experimental results will be presented. Vertical Type Ion Beam Facility without acceleration tube of 60keV 20mA class was installed. We successfully extracted 60keV 20mA using Duo- PiGatron Ion source for Vertical Type Ion Beam Facility. Use the BPM and Faraday-cup, is being studied the optimum conditions of ion beam extraction.

  15. Reactions of atomic oxygen with the chlorate ion and the perchlorate ion

    Science.gov (United States)

    Anan'ev, Vladimir; Miklin, Mikhail; Kriger, Ludmila

    2014-06-01

    The reactions of the chlorate ion with atomic oxygen formed under photolysis of the nitrate ion introduced to potassium chlorate crystal by co-crystallization were studied by optical and infrared absorption spectroscopy. The perchlorate ion was found to form in solids as product of addition reaction of singlet atomic oxygen, formed under dissociation of the peroxynitrite ion - the product of isomerization of the excited nitrate ion. Triplet atomic oxygen does not react with the chlorate ion. The atomic oxygen formed under photolysis of the nitrate ion introduced to potassium perchlorate crystal by co-crystallization does not react with the perchlorate ion.

  16. Ion species stratification within strong shocks in two-ion plasmas

    Science.gov (United States)

    Keenan, Brett D.; Simakov, Andrei N.; Taitano, William T.; Chacón, Luis

    2018-03-01

    Strong collisional shocks in multi-ion plasmas are featured in many environments, with Inertial Confinement Fusion (ICF) experiments being one prominent example. Recent work [Keenan et al., Phys. Rev. E 96, 053203 (2017)] answered in detail a number of outstanding questions concerning the kinetic structure of steady-state, planar plasma shocks, e.g., the shock width scaling by the Mach number, M. However, it did not discuss shock-driven ion-species stratification (e.g., relative concentration modification and temperature separation). These are important effects since many recent ICF experiments have evaded explanation by standard, single-fluid, radiation-hydrodynamic (rad-hydro) numerical simulations, and shock-driven fuel stratification likely contributes to this discrepancy. Employing the state-of-the-art Vlasov-Fokker-Planck code, iFP, along with multi-ion hydro simulations and semi-analytics, we quantify the ion stratification by planar shocks with the arbitrary Mach number and the relative species concentration for two-ion plasmas in terms of ion mass and charge ratios. In particular, for strong shocks, we find that the structure of the ion temperature separation has a nearly universal character across ion mass and charge ratios. Additionally, we find that the shock fronts are enriched with the lighter ion species and the enrichment scales as M4 for M ≫ 1.

  17. Electron string ion sources for carbon ion cancer therapy accelerators

    Science.gov (United States)

    Boytsov, A. Yu.; Donets, D. E.; Donets, E. D.; Donets, E. E.; Katagiri, K.; Noda, K.; Ponkin, D. O.; Ramzdorf, A. Yu.; Salnikov, V. V.; Shutov, V. B.

    2015-08-01

    The type of the Electron String Ion Sources (ESIS) is considered to be the appropriate one to produce pulsed C4+ and C6+ ion beams for cancer therapy accelerators. In fact, the new test ESIS Krion-6T already now provides more than 1010 C4+ ions per pulse and about 5 × 109 C6+ ions per pulse. Such ion sources could be suitable to apply at synchrotrons. It has also been found that Krion-6T can provide more than 1011 C6+ ions per second at the 100 Hz repetition rate, and the repetition rate can be increased at the same or larger ion output per second. This makes ESIS applicable at cyclotrons as well. ESIS can be also a suitable type of ion source to produce the 11C radioactive ion beams. A specialized cryogenic cell was experimentally tested at the Krion-2M ESIS for pulse injection of gaseous species into the electron string. It has been shown in experiments with stable methane that the total conversion efficiency of methane molecules to C4+ ions reached 5%÷10%. For cancer therapy with simultaneous irradiation and precise dose control (positron emission tomography) by means of 11C, transporting to the tumor with the primary accelerated 11C4+ beam, this efficiency is preliminarily considered to be large enough to produce the 11C4+ beam from radioactive methane and to inject this beam into synchrotrons.

  18. Upaya Menjaga Akuntabilitas Pertukaran Data dengan Teknologi Informasi Multiprotocol Label Switching

    Directory of Open Access Journals (Sweden)

    Ariefah Rachmawati

    2007-09-01

    Full Text Available Data communication network, part of the information technology, becomes so important in communicating information and transferring data. Most companies in the world, including companies operating in Indonesia, have used data communication networking technology for their day-to-day operation. However, transferring data through network has some security problems. Therefore, accountants should be familiar with and have knowledge about it in order to ensure high quality work that they provide. Based on IETF – Internet Engineering Task Force a (RFC (Request for Comment-3031, it is stailea that information technology used to communicate and transfer information as well as data should be efficient and safe.  Multiprotocols Label Switching (MPLS is a new technology used in virtual private network is one of the solutions in making data transfer efficient and safe.

  19. Preliminary Tests of a Paul ion Trap as an Ion Source

    Science.gov (United States)

    Sadat Kiai, S. M.; Zirak, A. R.; Elahi, M.; Adlparvar, S.; Mortazavi, B. N.; Safarien, A.; Farhangi, S.; Sheibani, S.; Alhooie, S.; Khalaj, M. M. A.; Dabirzadeh, A. A.; Ruzbehani, M.; Zahedi, F.

    2010-10-01

    The paper reports on the design and construction of a Paul ion trap as an ion source by using an impact electron ionization technique. Ions are produced in the trap and confined for the specific time which is then extracted and detected by a Faraday cup. Especial electronic configurations are employed between the end caps, ring electrodes, electron gun and a negative voltage for the detector. This configuration allows a constant low level of pure ion source between the pulsed confined ion sources. The present experimental results are based on the production and confinement of Argon ions with good stability and repeatability, but in principle, the technique can be used for various Argon like ions.

  20. GANIL Workshop on Ion Sources; Journees Sources d'Ions

    Energy Technology Data Exchange (ETDEWEB)

    Leroy, Renan [Grand Accelerateur National d' Ions Lourds (GANIL), 14 - Caen (France)

    1999-07-01

    The proceedings of the GANIL Workshop on Ion Sources held at GANIL - Caen on 18-19 March 1999 contains 13 papers aiming at improving the old source operation and developing new types of sources for nuclear research and studies of ion physics. A number of reports are devoted to applications like surface treatment, ion implantation or fusion injection. The 1+{yields}n+ transformation, charged particle transport in ECR sources, addition of cesium and xenon in negative ion sources and other basic issues in ion sources are also addressed.

  1. Review on heavy ion radiotherapy facilities and related ion sources (invited)

    International Nuclear Information System (INIS)

    Kitagawa, A.; Fujita, T.; Muramatsu, M.; Biri, S.; Drentje, A. G.

    2010-01-01

    Heavy ion radiotherapy awakens worldwide interest recently. The clinical results obtained by the Heavy Ion Medical Accelerator in Chiba at the National Institute of Radiological Sciences in Japan have clearly demonstrated the advantages of carbon ion radiotherapy. Presently, there are four facilities for heavy ion radiotherapy in operation, and several new facilities are under construction or being planned. The most common requests for ion sources are a long lifetime and good stability and reproducibility. Sufficient intensity has been achieved by electron cyclotron resonance ion sources at the present facilities.

  2. Quantitative ion implantation

    International Nuclear Information System (INIS)

    Gries, W.H.

    1976-06-01

    This is a report of the study of the implantation of heavy ions at medium keV-energies into electrically conducting mono-elemental solids, at ion doses too small to cause significant loss of the implanted ions by resputtering. The study has been undertaken to investigate the possibility of accurate portioning of matter in submicrogram quantities, with some specific applications in mind. The problem is extensively investigated both on a theoretical level and in practice. A mathematical model is developed for calculating the loss of implanted ions by resputtering as a function of the implanted ion dose and the sputtering yield. Numerical data are produced therefrom which permit a good order-of-magnitude estimate of the loss for any ion/solid combination in which the ions are heavier than the solid atoms, and for any ion energy from 10 to 300 keV. The implanted ion dose is measured by integration of the ion beam current, and equipment and techniques are described which make possible the accurate integration of an ion current in an electromagnetic isotope separator. The methods are applied to two sample cases, one being a stable isotope, the other a radioisotope. In both cases independent methods are used to show that the implantation is indeed quantitative, as predicted. At the same time the sample cases are used to demonstrate two possible applications for quantitative ion implantation, viz. firstly for the manufacture of calibration standards for instrumental micromethods of elemental trace analysis in metals, and secondly for the determination of the half-lives of long-lived radioisotopes by a specific activity method. It is concluded that the present study has advanced quantitative ion implantation to the state where it can be successfully applied to the solution of problems in other fields

  3. Ion-acoustic nonlinear periodic waves in electron-positron-ion plasma

    International Nuclear Information System (INIS)

    Chawla, J. K.; Mishra, M. K.

    2010-01-01

    Ion-acoustic nonlinear periodic waves, namely, ion-acoustic cnoidal waves have been studied in electron-positron-ion plasma. Using reductive perturbation method and appropriate boundary condition for nonlinear periodic waves, the Korteweg-de Vries (KdV) equation is derived for the system. The cnoidal wave solution of the KdV equation is discussed in detail. It is found that the frequency of the cnoidal wave is a function of its amplitude. It is also found that the positron concentration modifies the properties of the ion-acoustic cnoidal waves. The existence regions for ion-acoustic cnoidal wave in the parameters space (p,σ), where p and σ are the positron concentration and temperature ratio of electron to positron, are discussed in detail. In the limiting case these ion-acoustic cnoidal waves reduce to the ion-acoustic soliton solutions. The effect of other parameters on the characteristics of the nonlinear periodic waves is also discussed.

  4. Nanostructures by ion beams

    Science.gov (United States)

    Schmidt, B.

    Ion beam techniques, including conventional broad beam ion implantation, ion beam synthesis and ion irradiation of thin layers, as well as local ion implantation with fine-focused ion beams have been applied in different fields of micro- and nanotechnology. The ion beam synthesis of nanoparticles in high-dose ion-implanted solids is explained as phase separation of nanostructures from a super-saturated solid state through precipitation and Ostwald ripening during subsequent thermal treatment of the ion-implanted samples. A special topic will be addressed to self-organization processes of nanoparticles during ion irradiation of flat and curved solid-state interfaces. As an example of silicon nanocrystal application, the fabrication of silicon nanocrystal non-volatile memories will be described. Finally, the fabrication possibilities of nanostructures, such as nanowires and chains of nanoparticles (e.g. CoSi2), by ion beam synthesis using a focused Co+ ion beam will be demonstrated and possible applications will be mentioned.

  5. Sympathetic cooling of ions in a hybrid atom ion trap

    Energy Technology Data Exchange (ETDEWEB)

    Hoeltkemeier, Bastian

    2016-10-27

    In this thesis the dynamics of a trapped ion immersed in a spatially localized buffer gas is investigated. For a homogeneous buffer gas, the ion's energy distribution reaches a stable equilibrium only if the mass of the buffer gas atoms is below a critical value. This limitation can be overcome by using multipole traps in combination and/or a spatially confined buffer gas. Using a generalized model for elastic collisions of the ion with the buffer gas atoms, the ion's energy distribution is numerically determined for arbitrary buffer gas distributions and trap parameters. Three regimes characterized by the respective analytic form of the ion's equilibrium energy distribution are found. One of these is a novel regime at large atom-to-ion mass ratios where the final ion temperature can tuned by adiabatically decreasing the spatial extension of the buffer gas and the effective ion trap depth (forced sympathetic cooling). The second part of the thesis presents a hybrid atom ion trap designed for sympathetic cooling of hydroxide anions. In this hybrid trap the anions are immersed in a cloud of laser cooled rubidium atoms. The translational and rovibrational temperatures of the anions is probed by photodetachment tomography and spectroscopy which shows the first ever indication of sympathetic cooling of anions by laser cooled atoms.

  6. Electron string ion sources for carbon ion cancer therapy accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Boytsov, A. Yu.; Donets, D. E.; Donets, E. D.; Donets, E. E.; Ponkin, D. O.; Ramzdorf, A. Yu.; Salnikov, V. V.; Shutov, V. B. [Joint Institute for Nuclear Research, Dubna 141980 (Russian Federation); Katagiri, K.; Noda, K. [National Institute of Radiological Science, 4-9-1 Anagawa, Inage-ku, Chiba 263-8555 (Japan)

    2015-08-15

    The type of the Electron String Ion Sources (ESIS) is considered to be the appropriate one to produce pulsed C{sup 4+} and C{sup 6+} ion beams for cancer therapy accelerators. In fact, the new test ESIS Krion-6T already now provides more than 10{sup 10} C{sup 4+} ions per pulse and about 5 × 10{sup 9} C{sup 6+} ions per pulse. Such ion sources could be suitable to apply at synchrotrons. It has also been found that Krion-6T can provide more than 10{sup 11} C{sup 6+} ions per second at the 100 Hz repetition rate, and the repetition rate can be increased at the same or larger ion output per second. This makes ESIS applicable at cyclotrons as well. ESIS can be also a suitable type of ion source to produce the {sup 11}C radioactive ion beams. A specialized cryogenic cell was experimentally tested at the Krion-2M ESIS for pulse injection of gaseous species into the electron string. It has been shown in experiments with stable methane that the total conversion efficiency of methane molecules to C{sup 4+} ions reached 5%÷10%. For cancer therapy with simultaneous irradiation and precise dose control (positron emission tomography) by means of {sup 11}C, transporting to the tumor with the primary accelerated {sup 11}C{sup 4+} beam, this efficiency is preliminarily considered to be large enough to produce the {sup 11}C{sup 4+} beam from radioactive methane and to inject this beam into synchrotrons.

  7. Emission of positive oxygen ions from ion bombardment of adsorbate-covered metal surfaces

    International Nuclear Information System (INIS)

    Kaurin, M.G.

    1989-01-01

    During ion bombardment of metal surfaces, collision cascades can result in the emission of sputtered secondary ions. Recent experiments, however, have suggested that the emission of positive ions of electronegative adsorbates can result from electronic processes rather than from processes involving elastic collisions. This dissertation presents the results of experiments studying the emission of positive oxygen ions from oxygen- and carbon-monoxide-covered transition metal surfaces during bombardment by 25-250 keV ions of neon, argon, and krypton. The systems studied may be grouped into four categories. For a nickel substrate with adsorbed oxygen, the emission of positive oxygen ions proceeds through collision cascades. For titanium and niobium with adsorbed oxygen, the emission of positive oxygen ions is proportional to the primary ion velocity, consistent with emission from electronic processes; for a given primary ion velocity, the oxygen ion yield is independent of primary ion species. For substrates of molybdenum and tungsten, the oxygen yield is proportional to primary ion velocity, but the yield also depends on the primary ion species for a given primary ion velocity in a manner that is consistent with emission resulting from electronic processes. For these two groups, except for titanium, the yields during neon ion bombardment do not extrapolate (assuming linearity with primary ion velocity) to a nonzero value at zero beam velocity. The magnitude of the oxygen ion yields from these targets is not consistent with that expected if the emission were induced by secondary electrons emitted during the ion bombardment

  8. Systems and Methods for Ejection of Ions from an Ion Trap

    Science.gov (United States)

    Cooks, Robert Graham (Inventor); Snyder, Dalton (Inventor)

    2018-01-01

    The invention generally relates to systems and methods for ejection of ions from an ion trap. In certain embodiments, systems and methods of the invention sum two different frequency signals into a single summed signal that is applied to an ion trap. In other embodiments, an amplitude of a single frequency signal is modulated as the single frequency signal is being applied to the ion trap. In other embodiments, a first alternating current (AC) signal is applied to an ion trap that varies as a function of time, while a constant radio frequency (RF) signal is applied to the ion trap.

  9. Ion Beam Propulsion Study

    Science.gov (United States)

    2008-01-01

    The Ion Beam Propulsion Study was a joint high-level study between the Applied Physics Laboratory operated by NASA and ASRC Aerospace at Kennedy Space Center, Florida, and Berkeley Scientific, Berkeley, California. The results were promising and suggested that work should continue if future funding becomes available. The application of ion thrusters for spacecraft propulsion is limited to quite modest ion sources with similarly modest ion beam parameters because of the mass penalty associated with the ion source and its power supply system. Also, the ion source technology has not been able to provide very high-power ion beams. Small ion beam propulsion systems were used with considerable success. Ion propulsion systems brought into practice use an onboard ion source to form an energetic ion beam, typically Xe+ ions, as the propellant. Such systems were used for steering and correction of telecommunication satellites and as the main thruster for the Deep Space 1 demonstration mission. In recent years, "giant" ion sources were developed for the controlled-fusion research effort worldwide, with beam parameters many orders of magnitude greater than the tiny ones of conventional space thruster application. The advent of such huge ion beam sources and the need for advanced propulsion systems for exploration of the solar system suggest a fresh look at ion beam propulsion, now with the giant fusion sources in mind.

  10. Electron-ion correlation effects in ion-atom single ionization

    Energy Technology Data Exchange (ETDEWEB)

    Colavecchia, F.D.; Garibotti, C.R. [Centro Atomico Bariloche and Consejo Nacional de Investigaciones Cientificas y Tecnicas, 8400 San Carlos de Bariloche (Argentina); Gasaneo, G. [Departamento de Fisica, Universidad Nacional del Sur, Av. Alem 1253, 8000 Bahia Blanca (Argentina)

    2000-06-28

    We study the effect of electron-ion correlation in single ionization processes of atoms by ion impact. We present a distorted wave model where the final state is represented by a correlated function solution of a non-separable three-body continuum Hamiltonian, that includes electron-ion correlation as coupling terms of the wave equation. A comparison of the electronic differential cross sections computed with this model with other theories and experimental data reveals that the influence of the electron-ion correlation is more significant for low energy emitted electrons. (author). Letter-to-the-editor.

  11. Analisa Pembuatan Tabung Gas Lpg 3 Kg

    Directory of Open Access Journals (Sweden)

    Mustafa -

    2012-11-01

    Full Text Available Program konversi minyak tanah ke LPG merupakan program pemerintah yang bertujuan untuk mengurangisubsidi BBM, dengan mengalihkan pemakaian minyak tanah ke LPG. Tujuan analisa untuk mengetahui proses pembuatantabung gas, proses deep drawing dan metode pengelasan yang baik. Karena masih banyak orang yang takut memakai bahanbakar LPG tersebut karena takut meledak akibat kualitasnya yang kurang bagus. Deep Drawing atau biasa disebut drawingadalah salah satu jenis proses pembentukan logam, dimana bentuk pada umumnya berupa silinder dan selalu mempunyaikedalaman tertentu. Pada proses pembuatan tabung gas elpiji untuk mendisain suatu proses pembentukan logam , sepertipenarikan (drawing. Salah satu pekerjaan yang harus kita lakukan adalah menentukan atau memilih kapasitas mesin(energi, gaya, torsi serta perkakas dan peralatan yang akan digunakan untuk proses tersebut. Pada proses deep drawingdengan kecepatan tekan yang telah ditentukan (sesuai tabel daya tekan maksimal tidak boleh melebihi: 167,330 kg. Padaproses pengelasan circum, tegangan normal mencapai 61.16 kg/cm2, karena masih diatas uji ketahanan hidrostastik, makamasih dalam batas aman.

  12. CUSTOMER SEGMENTATION DENGAN METODE SELF ORGANIZING MAP (STUDI KASUS: UD. FENNY

    Directory of Open Access Journals (Sweden)

    A. A. Gde Bagus Ariana

    2012-11-01

    Full Text Available Saat ini persaingan bisnis pada perusahaan retail tidak hanya dengan menggunakan perangkat sistem informasi namun sudah dilengkapi dengan sistem pendukung keputusan. Salah satu metode sistem pendukung keputusan yang digunakan adalah data mining. Data mining digunakan untuk menemukan pola-pola yang tersembunyi pada database. UD. Fenny sebagai perusahaan retail ingin menemukan pola segmentasi pelanggan dengan menggunakan model RFM (Recency, Frequency, Monetary. Metode data mining untuk melakukan proses segmentasi adalah metode clustering. Clustering merupakan proses penggugusan data menjadi kelompok-kelompok yang memiliki kemiripan secara tidak terawasi (unsupervised. Sebelum melakukan proses clustering, dilakukan proses persiapan data dengan membuat datawarehouse menggunakan skema bintang (star scema. Selanjutnya dilakukan proses clustering dengan menggunakan metode Self Organizing Map (SOM/Kohonen. Metode ini merupakan salah satu model jaringan saraf tiruan yang menggunakan metode unsupervised. Dari hasil percobaan metode SOM melakukan proses clustering dan menggambarkan hasil clustering pada SOM plot. Dengan melakukan proses clustering, pihak pengambil keputusan dapat memahami segmentasi customer dan melakukan upaya peningkatan pelayanan customer.

  13. A quadrupole ion trap as low-energy cluster ion beam source

    CERN Document Server

    Uchida, N; Kanayama, T

    2003-01-01

    Kinetic energy distribution of ion beams was measured by a retarding field energy analyzer for a mass-selective cluster ion beam deposition system that uses a quadrupole ion trap as a cluster ion beam source. The results indicated that the system delivers a cluster-ion beam with energy distribution of approx 2 eV, which corresponded well to the calculation results of the trapping potentials in the ion trap. Using this deposition system, mass-selected hydrogenated Si cluster ions Si sub n H sub x sup + were actually deposited on Si(111)-(7x7) surfaces at impact kinetic energy E sub d of 3-30 eV. Observation by using a scanning tunneling microscope (STM) demonstrated that Si sub 6 H sub x sup + cluster ions landed on the surface without decomposition at E sub d =3 eV, while the deposition was destructive at E sub d>=18 eV. (author)

  14. Ion beam enhancement in magnetically insulated ion diodes for high-intensity pulsed ion beam generation in non-relativistic mode

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, X. P. [Key Laboratory of Materials Modification by Laser, Ion, and Electron Beams, Ministry of Education, Dalian University of Technology, Dalian 116024 (China); Surface Engineering Laboratory, School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024 (China); Zhang, Z. C.; Lei, M. K., E-mail: surfeng@dlut.edu.cn [Surface Engineering Laboratory, School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024 (China); Pushkarev, A. I. [Surface Engineering Laboratory, School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024 (China); Laboratory of Beam and Plasma Technology, High Technologies Physics Institute, Tomsk Polytechnic University, 30, Lenin Ave, 634050 Tomsk (Russian Federation)

    2016-01-15

    High-intensity pulsed ion beam (HIPIB) with ion current density above Child-Langmuir limit is achieved by extracting ion beam from anode plasma of ion diodes with suppressing electron flow under magnetic field insulation. It was theoretically estimated that with increasing the magnetic field, a maximal value of ion current density may reach nearly 3 times that of Child-Langmuir limit in a non-relativistic mode and close to 6 times in a highly relativistic mode. In this study, the behavior of ion beam enhancement by magnetic insulation is systematically investigated in three types of magnetically insulated ion diodes (MIDs) with passive anode, taking into account the anode plasma generation process on the anode surface. A maximal enhancement factor higher than 6 over the Child-Langmuir limit can be obtained in the non-relativistic mode with accelerating voltage of 200–300 kV. The MIDs differ in two anode plasma formation mechanisms, i.e., surface flashover of a dielectric coating on the anode and explosive emission of electrons from the anode, as well as in two insulation modes of external-magnetic field and self-magnetic field with either non-closed or closed drift of electrons in the anode-cathode (A-K) gap, respectively. Combined with ion current density measurement, energy density characterization is employed to resolve the spatial distribution of energy density before focusing for exploring the ion beam generation process. Consistent results are obtained on three types of MIDs concerning control of neutralizing electron flows for the space charge of ions where the high ion beam enhancement is determined by effective electron neutralization in the A-K gap, while the HIPIB composition of different ion species downstream from the diode may be considerably affected by the ion beam neutralization during propagation.

  15. Recharging of a screened ion on the molecular ion

    International Nuclear Information System (INIS)

    Karbovanets, M.I.; Lazur, V.Yu.; Yudin, G.L.; Gosudarstvennyj Komitet po Ispol'zovaniyu Atomnoj Ehnergii SSSR, Obninsk. Fiziko-Ehnergeticheskij Inst.)

    1987-01-01

    Charge exchange of a screened ion on a molecular ion is studied in the Oppenheimer-Brinkman-Cramers approximation. To calculate ion exchange probabilities and cross sections summed over the final degenerated electron states method of Green functions analogous to that applied earlier in the direct Coulomb excitation theory and atomic ionization is developed

  16. Negative Ion Density Fronts

    International Nuclear Information System (INIS)

    Igor Kaganovich

    2000-01-01

    Negative ions tend to stratify in electronegative plasmas with hot electrons (electron temperature Te much larger than ion temperature Ti, Te > Ti ). The boundary separating a plasma containing negative ions, and a plasma, without negative ions, is usually thin, so that the negative ion density falls rapidly to zero-forming a negative ion density front. We review theoretical, experimental and numerical results giving the spatio-temporal evolution of negative ion density fronts during plasma ignition, the steady state, and extinction (afterglow). During plasma ignition, negative ion fronts are the result of the break of smooth plasma density profiles during nonlinear convection. In a steady-state plasma, the fronts are boundary layers with steepening of ion density profiles due to nonlinear convection also. But during plasma extinction, the ion fronts are of a completely different nature. Negative ions diffuse freely in the plasma core (no convection), whereas the negative ion front propagates towards the chamber walls with a nearly constant velocity. The concept of fronts turns out to be very effective in analysis of plasma density profile evolution in strongly non-isothermal plasmas

  17. Multiply charged ions from solid substances with the mVINIS Ion Source

    International Nuclear Information System (INIS)

    Dragani, I; Nedeljkovi, T; Jovovi, J; Siljegovic, M; Dobrosavljevic, A

    2007-01-01

    We have used the well known metal-ions-from-volatile-compounds (MIVOC) method at the mVINIS Ion Source to produce the multiply charged ion beams form solid substances. Based on this method the very intense and stable multiply charged ion beams of several solid substances having the high melting points were extracted. The ion yields and the spectra of multiply charged ion beams obtained from solid materials like Fe and Hf will be presented. We have utilized the multiply charged ion beams from solid substances to irradiate the polymers, fullerenes and glassy carbon at the low energy channel for modification of materials

  18. PENGARUH JENIS ANODA PADA PROSES PEMULIHAN LOGAM NIKEL DARI TIRUAN AIR LIMBAH ELECTROPLATING MENGGUNAKAN SEL ELEKTRODEPOSISI

    Directory of Open Access Journals (Sweden)

    Djaenudin Dhaenudin

    2013-11-01

    Full Text Available EFFECT OF ANODES TYPES ON NICKEL RECOVERY FROM SYNTHETIC ELECTROPLATING WASTE ELECTRODEPOSITION CELLS. A study concerning the recovery of nickel from electroplating wastewater artificial solution. The study was conducted with a batch system using electrodeposition cell consisting of two spaces separated by water hyacinth leaf, copper cathode plate, H2SO4 solution anolyte, catholyte solution of NiSO4 plus NaCl supporting electrolyte and anode varied. Electrodeposition performed at the direct current of 5V power for 4 hours each run. The research objective was to obtain the best anode in nickel electrodeposition process of electroplating waste artificial solution. Graphite, stainless steel type AISI 316 and the lead were used as a variation of the anode. Concentration of nickel in the catholyte at baseline 2200 mg/L. The results showed that the anode was a graphite anode with best value decreased by 72.44% nickel concentration, deposition of nickel on the cathode of 0.188 grams and specific energy values ​​of 6.1625 kWh/kg.nickel.   Telah dilakukan penelitian tentang pemulihan logam nikel dari larutan tiruan air limbah electroplating. Penelitian dilakukan dengan sistem batch menggunakan sel elektrodeposisi yang terdiri dari dua ruang yang dipisahkan dengan daun eceng gondok, katoda pelat tembaga, anolit larutan H2SO4, katolit larutan NiSO4 ditambah elektrolit pendukung larutan NaCl dan anoda divariasikan. Elektrodeposisi dilakukan pada listrik searah sebesar 5V selama 4 jam setiap tempuhan. Tujuan penelitian adalah memperoleh anoda terbaik pada proses elektrodeposisi nikel dari larutan tiruan limbah electroplating. Grafit, Stainless Steel  tipe AISI 316 dan timbal digunakan sebagai variasi jenis anoda. Konsentrasi nikel dalam katolit pada awal penelitian 2200 mg/L. Hasil penelitian menunjukkan bahwa anoda grafit merupakan anoda yang paling baik dengan nilai penurunan konsentrasi nikel sebesar 72,44%, deposisi nikel di katoda sebesar 0

  19. Ion Selectivity Mechanism in a Bacterial Pentameric Ligand-Gated Ion Channel

    International Nuclear Information System (INIS)

    Wang, Hailong; Cheng, Xiaolin

    2011-01-01

    The proton-gated ion channel from Gloeobacter violaceus (GLIC) is a prokaryotic homolog of the eukaryotic nicotinic acetylcholine receptor (nAChR) that responds to the binding of neurotransmitter acetylcholine and mediates fast signal transmission. Recent emergence of a high resolution crystal structure of GLIC captured in a potentially open state allowed detailed, atomic-level insight into ion conduction and selectivity mechanisms in these channels. Herein, we have examined the barriers to ion conduction and origins of ion selectivity in the GLIC channel by the construction of potential of mean force (PMF) profiles for sodium and chloride ions inside the transmembrane region. Our calculations reveal that the GLIC channel is open for a sodium ion to transport, but presents a ∼10 kcal/mol free energy barrier for a chloride ion, which arises primarily from the unfavorable interactions with a ring of negatively charged glutamate residues (E-2) at the intracellular end and a ring of hydrophobic residues (I9) in the middle of the transmembrane domain. Our collective findings further suggest that the charge selection mechanism can, to a large extent, be attributed to the narrow intracellular end and a ring of glutamate residues in this position their strong negative electrostatics and ability to bind cations. By contrast, E19 at the extracellular entrance only plays a minor role in ion selectivity of GLIC. In addition to electrostatics, both ion hydration and protein dynamics are found to be crucial for ion conduction as well, which explains why a chloride ion experiences a much greater barrier than a sodium ion in the hydrophobic region of the pore.

  20. Partition/Ion-Exclusion Chromatographic Ion Stacking for the Analysis of Trace Anions in Water and Salt Samples by Ion Chromatography.

    Science.gov (United States)

    Akter, Fouzia; Saito, Shingo; Tasaki-Handa, Yuiko; Shibukawa, Masami

    2018-01-01

    A new analytical methodology for a simple and efficient on-line preconcentration of trace inorganic anions in water and salt samples prior to ion chromatographic determination is proposed. The preconcentration method is based on partition/ion-exclusion chromatographic ion stacking (PIEC ion stacking) with a hydrophilic polymer gel column containing a small amount of fixed anionic charges. The developed on-line PIEC ion stacking-ion chromatography method was validated by recovery experiments for the determination of nitrate in tap water in terms of both accuracy and precision, and the results showed the reliability of the method. The method proposed was also successfully applied to the determination of trace impurity nitrite and nitrate in reagent-grade salts of sodium sulfate. A low background level can be achieved since pure water is used as the eluant for the PIEC ion stacking. It is possible to reach sensitive detection at sub-μg L -1 levels by on-line PIEC ion stacking-ion chromatography.

  1. Development of a compact ECR ion source for various ion production

    Energy Technology Data Exchange (ETDEWEB)

    Muramatsu, M., E-mail: m-mura@nirs.go.jp; Hojo, S.; Iwata, Y.; Katagiri, K.; Sakamoto, Y.; Kitagawa, A. [National Institute of Radiological Sciences (NIRS), 4-9-1 Anagawa, Inage, Chiba 263-8555 (Japan); Takahashi, N. [Sumitomo Heavy Industries, Ltd., 19 Natsushima, Yokosuka, Kanagawa 237-8555 (Japan); Sasaki, N.; Fukushima, K.; Takahashi, K.; Suzuki, T.; Sasano, T. [Accelerator Engineering Corporation, 3-8-5 Konakadai, Inage, Chiba 263-0043 (Japan); Uchida, T.; Yoshida, Y. [Bio-Nano Electronics Research Centre, Toyo University, 2100 Kujirai, Kawagoe-shi, Saitama 350-8585 (Japan); Hagino, S.; Nishiokada, T.; Kato, Y. [Graduate School of Engineering, Osaka University, 2-1 Yamada-oka, Suita-shi, Osaka 565-0871 (Japan)

    2016-02-15

    There is a desire that a carbon-ion radiotherapy facility will produce various ion species for fundamental research. Although the present Kei2-type ion sources are dedicated for the carbon-ion production, a future ion source is expected that could provide: (1) carbon-ion production for medical use, (2) various ions with a charge-to-mass ratio of 1/3 for the existing Linac injector, and (3) low cost for modification. A prototype compact electron cyclotron resonance (ECR) ion source, named Kei3, based on the Kei series has been developed to correspond to the Kei2 type and to produce these various ions at the National Institute of Radiological Sciences (NIRS). The Kei3 has an outer diameter of 280 mm and a length of 1120 mm. The magnetic field is formed by the same permanent magnet as Kei2. The movable extraction electrode has been installed in order to optimize the beam extraction with various current densities. The gas-injection side of the vacuum chamber has enough space for an oven system. We measured dependence of microwave frequency, extraction voltage, and puller position. Charge state distributions of helium, carbon, nitrogen, oxygen, and neon were also measured.

  2. Molecular dynamics simulations of ion range profiles for heavy ions in light targets

    Energy Technology Data Exchange (ETDEWEB)

    Lan, C. [Department of Materials Science and Engineering, University of Tennessee, Knoxville, TN 37996 (United States); State Key Laboratory of Nuclear Physics and Technology, Peking University, 100871 (China); Xue, J.M. [State Key Laboratory of Nuclear Physics and Technology, Peking University, 100871 (China); Zhang, Y., E-mail: Zhangy1@ornl.gov [Department of Materials Science and Engineering, University of Tennessee, Knoxville, TN 37996 (United States); Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States); Morris, J.R. [Department of Materials Science and Engineering, University of Tennessee, Knoxville, TN 37996 (United States); Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States); Zhu, Z. [Pacific Northwest National Laboratory, Richland, WA 99352 (United States); Gao, Y.; Wang, Y.G.; Yan, S. [State Key Laboratory of Nuclear Physics and Technology, Peking University, 100871 (China); Weber, W.J. [Department of Materials Science and Engineering, University of Tennessee, Knoxville, TN 37996 (United States); Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States)

    2012-09-01

    The determination of stopping powers for slow heavy ions in targets containing light elements is important to accurately describe ion-solid interactions, evaluate ion irradiation effects and predict ion ranges for device fabrication and nuclear applications. Recently, discrepancies of up to 40% between the experimental results and SRIM (Stopping and Range of Ions in Matter) predictions of ion ranges for heavy ions with medium and low energies (<{approx}25 keV/nucleon) in light elemental targets have been reported. The longer experimental ion ranges indicate that the stopping powers used in the SRIM code are overestimated. Here, a molecular dynamics simulation scheme is developed to calculate the ion ranges of heavy ions in light elemental targets. Electronic stopping powers generated from both a reciprocity approach and the SRIM code are used to investigate the influence of electronic stopping on ion range profiles. The ion range profiles for Au and Pb ions in SiC and Er ions in Si, with energies between 20 and 5250 keV, are simulated. The simulation results show that the depth profiles of implanted ions are deeper and in better agreement with the experiments when using the electronic stopping power values derived from the reciprocity approach. These results indicate that the origin of the discrepancy in ion ranges between experimental results and SRIM predictions in the low energy region may be an overestimation of the electronic stopping powers used in SRIM.

  3. Ion implantation

    International Nuclear Information System (INIS)

    Johnson, E.

    1986-01-01

    It is the purpose of the present paper to give a review of surface alloy processing by ion implantation. However, rather than covering this vast subject as a whole, the survey is confined to a presentation of the microstructures that can be found in metal surfaces after ion implantation. The presentation is limited to alloys processed by ion implantation proper, that is to processes in which the alloy compositions are altered significantly by direct injection of the implanted ions. The review is introduced by a presentation of the processes taking place during development of the fundamental event in ion implantation - the collision cascade, followed by a summary of the various microstructures which can be formed after ion implantation into metals. This is compared with the variability of microstructures that can be achieved by rapid solidification processing. The microstructures are subsequently discussed in the light of the processes which, as the implantations proceed, take place during and immediately after formation of the individual collision cascades. These collision cascades define the volumes inside which individual ions are slowed down in the implanted targets. They are not only centres for vigorous agitation but also the sources for formation of excess concentrations of point defects, which will influence development of particular microstructures. A final section presents a selection of specific structures which have been observed in different alloy systems. (orig./GSCH)

  4. Transport of negative hydrogen and deuterium ions in RF-driven ion sources

    International Nuclear Information System (INIS)

    Gutser, R; Wuenderlich, D; Fantz, U

    2010-01-01

    Negative hydrogen ion sources are major components of neutral beam injection systems for plasma heating in future large-scale fusion experiments such as ITER. In order to fulfill the requirements of the ITER neutral beam injection, a high-performance, large-area RF-driven ion source for negative ions is being developed at the MPI fuer Plasmaphysik. Negative hydrogen ions are mainly generated on a converter surface by impinging neutral particles and positive ions under the influence of magnetic fields and the plasma sheath potential. The 3D transport code TrajAn has been applied in order to obtain the total and spatially resolved extraction probabilities for H - and D - ions under identical plasma parameters and the realistic magnetic field topology of the ion source. A comparison of the isotopes shows a lower total extraction probability in the case of deuterium ions, caused by a different transport effect. The transport calculation shows that distortions of the spatial distributions of ion birth and extraction by the magnetic electron suppression field are present for both negative hydrogen and deuterium ions.

  5. Tandem Mass Spectrometry and Ion Mobility Reveals Structural Insight into Eicosanoid Product Ion Formation.

    Science.gov (United States)

    Di Giovanni, James P; Barkley, Robert M; Jones, David N M; Hankin, Joseph A; Murphy, Robert C

    2018-04-23

    Ion mobility measurements of product ions were used to characterize the collisional cross section (CCS) of various complex lipid [M-H] - ions using traveling wave ion mobility mass spectrometry (TWIMS). TWIMS analysis of various product ions derived after collisional activation of mono- and dihydroxy arachidonate metabolites was found to be more complex than the analysis of intact molecular ions and provided some insight into molecular mechanisms involved in product ion formation. The CCS observed for the molecular ion [M-H] - and certain product ions were consistent with a folded ion structure, the latter predicted by the proposed mechanisms of product ion formation. Unexpectedly, product ions from [M-H-H 2 O-CO 2 ] - and [M-H-H 2 O] - displayed complex ion mobility profiles suggesting multiple mechanisms of ion formation. The [M-H-H 2 O] - ion from LTB 4 was studied in more detail using both nitrogen and helium as the drift gas in the ion mobility cell. One population of [M-H-H 2 O] - product ions from LTB 4 was consistent with formation of covalent ring structures, while the ions displaying a higher CCS were consistent with a more open-chain structure. Using molecular dynamics and theoretical CCS calculations, energy minimized structures of those product ions with the open-chain structures were found to have a higher CCS than a folded molecular ion structure. The measurement of product ion mobility can be an additional and unique signature of eicosanoids measured by LC-MS/MS techniques. Graphical Abstract ᅟ.

  6. Tandem Mass Spectrometry and Ion Mobility Reveals Structural Insight into Eicosanoid Product Ion Formation

    Science.gov (United States)

    Di Giovanni, James P.; Barkley, Robert M.; Jones, David N. M.; Hankin, Joseph A.; Murphy, Robert C.

    2018-04-01

    Ion mobility measurements of product ions were used to characterize the collisional cross section (CCS) of various complex lipid [M-H]- ions using traveling wave ion mobility mass spectrometry (TWIMS). TWIMS analysis of various product ions derived after collisional activation of mono- and dihydroxy arachidonate metabolites was found to be more complex than the analysis of intact molecular ions and provided some insight into molecular mechanisms involved in product ion formation. The CCS observed for the molecular ion [M-H]- and certain product ions were consistent with a folded ion structure, the latter predicted by the proposed mechanisms of product ion formation. Unexpectedly, product ions from [M-H-H2O-CO2]- and [M-H-H2O]- displayed complex ion mobility profiles suggesting multiple mechanisms of ion formation. The [M-H-H2O]- ion from LTB4 was studied in more detail using both nitrogen and helium as the drift gas in the ion mobility cell. One population of [M-H-H2O]- product ions from LTB4 was consistent with formation of covalent ring structures, while the ions displaying a higher CCS were consistent with a more open-chain structure. Using molecular dynamics and theoretical CCS calculations, energy minimized structures of those product ions with the open-chain structures were found to have a higher CCS than a folded molecular ion structure. The measurement of product ion mobility can be an additional and unique signature of eicosanoids measured by LC-MS/MS techniques. [Figure not available: see fulltext.

  7. An electron cyclotron resonance ion source based low energy ion beam platform

    International Nuclear Information System (INIS)

    Sun, L. T.; Shang, Y.; Ma, B. H.; Zhang, X. Z.; Feng, Y. C.; Li, X. X.; Wang, H.; Guo, X. H.; Song, M. T.; Zhao, H. Y.; Zhang, Z. M.; Zhao, H. W.; Xie, D. Z.

    2008-01-01

    To satisfy the requirements of surface and atomic physics study in the field of low energy multiple charge state ion incident experiments, a low energy (10 eV/q-20 keV/q) ion beam platform is under design at IMP. A simple test bench has been set up to test the ion beam deceleration systems. Considering virtues such as structure simplicity, easy handling, compactness, cost saving, etc., an all-permanent magnet ECRIS LAPECR1 [Lanzhou all-permanent magnet electron cyclotron resonance (ECR) ion source No. 1] working at 14.5 GHz has been adopted to produce intense medium and low charge state ion beams. LAPECR1 source has already been ignited. Some intense low charge state ion beams have been produced on it, but the first test also reveals that many problems are existing on the ion beam transmission line. The ion beam transmission mismatches result in the depressed performance of LAPECR1, which will be discussed in this paper. To obtain ultralow energy ion beam, after being analyzed by a double-focusing analyzer magnet, the selected ion beam will be further decelerated by two afocal deceleration lens systems, which is still under design. This design has taken into consideration both ions slowing down and also ion beam focusing. In this paper, the conceptual design of deceleration system will be discussed

  8. An electron cyclotron resonance ion source based low energy ion beam platform.

    Science.gov (United States)

    Sun, L T; Shang, Y; Ma, B H; Zhang, X Z; Feng, Y C; Li, X X; Wang, H; Guo, X H; Song, M T; Zhao, H Y; Zhang, Z M; Zhao, H W; Xie, D Z

    2008-02-01

    To satisfy the requirements of surface and atomic physics study in the field of low energy multiple charge state ion incident experiments, a low energy (10 eV/q-20 keV/q) ion beam platform is under design at IMP. A simple test bench has been set up to test the ion beam deceleration systems. Considering virtues such as structure simplicity, easy handling, compactness, cost saving, etc., an all-permanent magnet ECRIS LAPECR1 [Lanzhou all-permanent magnet electron cyclotron resonance (ECR) ion source No. 1] working at 14.5 GHz has been adopted to produce intense medium and low charge state ion beams. LAPECR1 source has already been ignited. Some intense low charge state ion beams have been produced on it, but the first test also reveals that many problems are existing on the ion beam transmission line. The ion beam transmission mismatches result in the depressed performance of LAPECR1, which will be discussed in this paper. To obtain ultralow energy ion beam, after being analyzed by a double-focusing analyzer magnet, the selected ion beam will be further decelerated by two afocal deceleration lens systems, which is still under design. This design has taken into consideration both ions slowing down and also ion beam focusing. In this paper, the conceptual design of deceleration system will be discussed.

  9. Ion-beam plasma and propagation of intense compensated ion beams

    Energy Technology Data Exchange (ETDEWEB)

    Gabovich, M D [AN Ukrainskoj SSR, Kiev. Inst. Fiziki

    1977-02-01

    Discussed are the results of investigation of plasma properties received by neutralization of intense ion beam space charge. Considered is the process of ion beam compensation by charges, formed as a result of gas ionization by this beam or by externally introduced ones. Emphasis is placed on collective phenomena in ion-beam plasma, in particular on non-linear effects limiting amplitude of oscillations. It is shown that not only dynamic decompensation but the Coulomb collisions of ions with electrons as well as other collective oscillations significantly affects the propagation of compensated ion beams. All the processes are to be taken into account in solving the problem of obtaining ''superdense'' compensated beams.

  10. Ion-beam plasma and propagation of intense compensated ion beams

    International Nuclear Information System (INIS)

    Gabovich, M.D.

    1977-01-01

    Discussed are the results of investigation of plasma properties recieved by neutralization of intensive ion beam space charge. Considered is the process of ion beam compensation by charges, formed as a result of gas ionization by this beam or by externally introduced ones. Emphasis is placed on collective phenomena in ion-beam plasma, in particular on non-linear effects limiting amplitude of oscillations. It is shown, that not only dinamic decompensation but the Coulomb collisions of ions with electrons as well as other collective oscillations significantly affects the propagation of compensated ion beams. All the processes are to be taken into account at solving the problem of obtaining ''superdense'' compensated beams

  11. Ion source techniques for high-speed processing of material surface by ion beams

    International Nuclear Information System (INIS)

    Ishikawa, Junzo

    1990-01-01

    The present paper discusses some key or candidate techniques for future ion source development and such ion sources developed by the author. Several types of microwave ion sources for producing low charge state ions have been developed in Japan. When a microwave plasma cathode developed by the author is adapted to a Kaufman type ion source, the electron emission currents are found to be 2.5 A for argon gas and 0.5-0.9 A for oxygen gas. An alternative ionization method for metal atoms is strongly required for high-speed processing of material surface by metal-ion beams. Detailed discussion is made of collisional ionization of vaporized atoms, and negative-ion production (secondary negative-ion emission by sputtering). An impregnated electrode type liquid-metal ion source developed by the author, which has a porous tip structure, is described. The negative-ion production efficiency is quite high. The report also presents a neutral and ionized alkaline-metal bombardment type heavy negative-ion source, which consists of a cesium plasma ion source, suppressor, target electrode, negative-ion extraction electrode, and einzel lens. (N.K.)

  12. Fundamental processes determining the highly charged ion production in ECR ion sources

    International Nuclear Information System (INIS)

    Shirkov, G.D.

    1992-01-01

    The ion confinement and loss conditions in the open magnetic traps have been analyzed in this article. In EGRIS the the ions are confined in the negative potential well. The simultaneous application of ion cooling and pulse regime is proposed for pulse injection of highly charged ions in heavy ion accelerators and storage rings. 14 refs.; 3 figs

  13. Ion-selective electrode reviews

    CERN Document Server

    Thomas, J D R

    1983-01-01

    Ion-Selective Electrode Reviews, Volume 5 is a collection of articles that covers ion-speciation. The book aims to present the advancements of the range and capabilities of selective ion-sensors. The topics covered in the selection are neutral carrier based ion-selective electrodes; reference electrodes and liquid junction effects in ion-selective electrode potentiometry; ion transfer across water/organic phase boundaries and analytical; and carbon substrate ion-selective electrodes. The text will be of great use to chemists and chemical engineers.

  14. Electron Beam Ion Sources

    CERN Document Server

    Zschornacka, G.; Thorn, A.

    2013-12-16

    Electron beam ion sources (EBISs) are ion sources that work based on the principle of electron impact ionization, allowing the production of very highly charged ions. The ions produced can be extracted as a DC ion beam as well as ion pulses of different time structures. In comparison to most of the other known ion sources, EBISs feature ion beams with very good beam emittances and a low energy spread. Furthermore, EBISs are excellent sources of photons (X-rays, ultraviolet, extreme ultraviolet, visible light) from highly charged ions. This chapter gives an overview of EBIS physics, the principle of operation, and the known technical solutions. Using examples, the performance of EBISs as well as their applications in various fields of basic research, technology and medicine are discussed.

  15. ECR ion source based low energy ion beam facility

    Indian Academy of Sciences (India)

    Mass analyzed highly charged ion beams of energy ranging from a few keV to a few MeV plays an important role in various aspects of research in modern physics. In this paper a unique low energy ion beam facility (LEIBF) set up at Nuclear Science Centre (NSC) for providing low and medium energy multiply charged ion ...

  16. Ion-acoustic double layers in multi-species plasmas maintained by negative ions

    International Nuclear Information System (INIS)

    Verheest, F.

    1989-01-01

    A study is made of ion-acoustic double layers in a plasma consisting of any number of cold positive and negative ion (and cold electron) species in addition to one isothermal electron population. The Sagdeev potential is obtained in general, together with limits on both compressive and rarefactive solutions for ion-acoustic double layers and/or solitons. Weak ion-acoustic double layers are described by a modified Korteweg-de Vries equation. Such double layers are not possible in plasmas with only positive ion species and one electron population. When one or more negative ion and/or cold electron species are included above a certain threshold density, rarefactive ion-acoustic double layers occur, but no compressive ones. The double-layer form of the potential is given, together with an application to a plasma with one positive and one negative ion component. It is shown that there is indeed such a threshold density for the negative ion density, depending on the charge-to-mass ratios of both types of ions. The threshold density is determined numerically for a range of such ratios and discussed in view of possible relevance to auroral and experimental plasmas. In the discussion, cold electrons can play the role of the negative ion species. (author)

  17. Does the Drug Facts Label for nonprescription drugs meet its design objectives? A new procedure for assessing label effectiveness

    Directory of Open Access Journals (Sweden)

    Michael P Ryan

    2017-07-01

    Full Text Available We demonstrate an expanded procedure for assessing drug-label comprehension. Innovations include a pretest of drug preconceptions, verbal ability and label attentiveness measures, a label-scanning task, a free-recall test, category-clustering measures, and preconception-change scores. In total, 55 female and 39 male undergraduates read a facsimile Drug Facts Label for aspirin, a Cohesive-Prose Label, or a Scrambled-Prose Label. The Drug Facts Label outperformed the Scrambled-Prose Label, but not the Cohesive-Prose Label, in scanning effectiveness. The Drug Facts Label was no better than the Cohesive-Prose Label or the Scrambled-Prose Label in promoting attentiveness, recall and organization of drug facts, or misconception refutation. Discussion focuses on the need for refutational labels based on a sequence-of-events text schema.

  18. Implementasi Kriptografi Kunci Publik dengan Algoritma RSA-CRT pada Aplikasi Instant Messaging

    Directory of Open Access Journals (Sweden)

    Ashari Arief

    2016-06-01

    Full Text Available Instant messaging merupakan salah satu bentuk kemajuan teknologi komunikasi yang mempermudah penyampaian informasi. Saat ini, dengan semakin banyaknya pengguna aplikasi instant messaging berakibat pada dampak negatif berupa penyadapan data khususnya saat terjadi komunikasi yang bersifat rahasia. Algoritma RSA merupakan salah satu satu algoritma dalam kriptografi kunci publik. Pada proses enkripsi dan dekripsi digunakan kunci yang berbeda. Proses dekripsi algoritma RSA sering terjadi kendala karena ukuran kunci dekripsi yang relatif besar dapat memperlambat proses. Untuk mempercepat proses dekripsi, algoritma RSA dapat dimodifikasi dengan algoritma CRT (Chinese Remainder Theorem, sering disebut dengan Algoritma RSA-CRT. Implementasi algoritma kriptografi RSA-CRT pada aplikasi instant messaging pada panjang bit n mulai dari 56 bit sampai 88 bit, proses dekripsi RSA-CRT dua kali lebih cepat dibandingkan proses dekripsi RSA. 

  19. An alkali ion source based on graphite intercalation compounds for ion mobility spectrometry

    International Nuclear Information System (INIS)

    Tabrizchi, Mahmoud; Hosseini, Zahra S

    2008-01-01

    A variety of alkali cation emitters were developed as the ion source for ion mobility spectrometry. The cation emitters were constructed based on alkali ion graphite intercalation compounds (GICs). The compounds were prepared by fusing alkali salts with ground graphite. In order to produce alkali ions, the compounds were loaded on a filament and heated to red. Reactant ions of the form alk + ions were observed for the alkali salts NaCl, KCl.LiCl, CsCl and SrCl. In addition to Na + ions, K + ions were observed at the beginning of thermionic emission from Na-GIC. This is due to the low ionization potential of potassium that exists in trace amounts in sodium salts. In addition to the potassium ion, Na + was observed in the case of LiCl salt. The Na + and K + peaks originating from impurities totally disappeared after about 40 min. However, the thermionic emission of the main ion of the corresponding salt lasted for several days. No negative ions were observed upon reversing the drift field. Selected organic compounds (methyl isobutyl ketone, dimethyl sulfoxide, acetone and tetrahydrofuran) were also ionized via alkali cation attachment reaction. Distinct ion mobility patterns were observed for different substances using one type of alkali reactant ion. However, the ion mobility pattern for a given substance changed when a different alkali reactant ion was used. Ammonia and amines were not ionized when this source was used

  20. Plasma ion sources and ion beam technology in microfabrications

    International Nuclear Information System (INIS)

    Ji, Lili

    2007-01-01

    For over decades, focused ion beam (FIB) has been playing a very important role in microscale technology and research, among which, semiconductor microfabrication is one of its biggest application area. As the dimensions of IC devices are scaled down, it has shown the need for new ion beam tools and new approaches to the fabrication of small-scale devices. In the meanwhile, nanotechnology has also deeply involved in material science research and bioresearch in recent years. The conventional FIB systems which utilize liquid gallium ion sources to achieve nanometer scale resolution can no longer meet the various requirements raised from such a wide application area such as low contamination, high throughput and so on. The drive towards controlling materials properties at nanometer length scales relies on the availability of efficient tools. In this thesis, three novel ion beam tools have been developed and investigated as the alternatives for the conventional FIB systems in some particular applications. An integrated focused ion beam (FIB) and scanning electron microscope (SEM) system has been developed for direct doping or surface modification. This new instrument employs a mini-RF driven plasma source to generate focused ion beam with various ion species, a FEI two-lens electron (2LE) column for SEM imaging, and a five-axis manipulator system for sample positioning. An all-electrostatic two-lens column has been designed to focus the ion beam extracted from the source. Based on the Munro ion optics simulation, beam spot sizes as small as 100 nm can be achieved at beam energies between 5 to 35 keV if a 5 (micro)m-diameter extraction aperture is used. Smaller beam spot sizes can be obtained with smaller apertures at sacrifice of some beam current. The FEI 2LE column, which utilizes Schottky emission, electrostatic focusing optics, and stacked-disk column construction, can provide high-resolution (as small as 20 nm) imaging capability, with fairly long working distance

  1. Gas phase ion chemistry

    CERN Document Server

    Bowers, Michael T

    1979-01-01

    Gas Phase Ion Chemistry, Volume 1 covers papers on the advances of gas phase ion chemistry. The book discusses the advances in flow tubes and the measurement of ion-molecule rate coefficients and product distributions; the ion chemistry of the earth's atmosphere; and the classical ion-molecule collision theory. The text also describes statistical methods in reaction dynamics; the state selection by photoion-photoelectron coincidence; and the effects of temperature and pressure in the kinetics of ion-molecule reactions. The energy distribution in the unimolecular decomposition of ions, as well

  2. Design of the compact ECR ion source for heavy-ion therapy

    International Nuclear Information System (INIS)

    Muramatsu, M.; Kitagawa, A.; Sato, S.; Sato, Y.; Yamada, S.; Hattori, T.; Shibuya, S.

    1999-01-01

    Heavy ion cancer treatment is successfully being done at the Heavy Ion Medical Accelerator in Chiba (HIMAC). Design philosophy for the ion sources for medical facilities are as follows: sufficient beam intensity, a few hundred eμA; long lifetime with good stability; easy operation and easy maintenance; and compactness. In order to develop such source for future heavy-ion facilities, we have tested compact electron cyclotron resonance (ECR) ion sources using permanent magnets both for axial and radial confinement of hot electrons. Since the yield of C 2+ ion in the firstly-developed source (2.45 GHz ECR) was 15 eμA and far below the medical requirement (-150 eμA for the HIMAC), a new source has been proposed, having the frequency of 10 GHz. The extracted intensity of C 4+ (and C 2+ ) ions is expected to be higher than 200 eμA. (author)

  3. Compression Ratio Ion Mobility Programming (CRIMP) Accumulation and Compression of Billions of Ions for Ion Mobility-Mass Spectrometry Using Traveling Waves in Structures for Lossless Ion Manipulations (SLIM)

    Energy Technology Data Exchange (ETDEWEB)

    Deng, Liulin; Garimella, Venkata BS; Hamid, Ahmed M.; Webb, Ian K.; Attah, Isaac K.; Norheim, Randolph V.; Prost, Spencer A.; Zheng, Xueyun; Sandoval, Jeremy A.; Baker, Erin M.; Ibrahim, Yehia M.; Smith, Richard D.

    2017-05-25

    We report on the implementation of a traveling wave (TW) based compression ratio ion mobility programming (CRIMP) approach within Structures for Lossless Ion Manipulations (SLIM) that enables both greatly enlarged trapped ion charge capacities and also their subsequent efficient compression for use in ion mobility (IM) separations. Ion accumulation is conducted in a long serpentine path TW SLIM region after which CRIMP allows the large ion populations to be ‘squeezed’. The compression process occurs at an interface between two SLIM regions, one operating conventionally and the second having an intermittently pausing or ‘stuttering’ TW, allowing the contents of multiple bins of ions from the first region to be merged into a single bin in the second region. In this initial work stationary voltages in the second region were used to block ions from exiting the first (trapping) region, and the resumption of TWs in the second region allows ions to exit, and the population to also be compressed if CRIMP is applied. In our initial evaluation we show that the number of charges trapped for a 40 s accumulation period was ~5×109, more than two orders of magnitude greater than the previously reported charge capacity using an ion funnel trap. We also show that over 1×109 ions can be accumulated with high efficiency in the present device, and that the extent of subsequent compression is only limited by the space charge capacity of the trapping region. Lower compression ratios allow increased IM peak heights without significant loss of signal, while excessively large compression ratios can lead to ion losses and other artifacts. Importantly, we show that extended ion accumulation in conjunction with CRIMP and multiple passes provides the basis for a highly desirable combination of ultra-high sensitivity and ultra-high resolution IM separations using SLIM.

  4. Fast ion-atom and ion-molecule collisions

    CERN Document Server

    2013-01-01

    The principal goal of this book is to provide state-of-the art coverage of the non-relativistic three- and four-body theories at intermediate and high energy ion-atom and ion-molecule collisions. The focus is on the most frequently studied processes: electron capture, ionization, transfer excitation and transfer ionization. The content is suitable both for graduate students and experienced researchers. For these collisions, the literature has seen enormous renewal of activity in the development and applications of quantum-mechanical theories. This subject is of relevance in several branches of science and technology, like accelerator-based physics, the search for new sources of energy and high temperature fusion of light ions. Other important applications are in life sciences via medicine, where high-energy ion beams are used in radiotherapy for which a number of storage ring accelerators are in full operation, under construction or planned to be built worldwide. Therefore, it is necessary to review this fiel...

  5. Ion Concentration- and Voltage-Dependent Push and Pull Mechanisms of Potassium Channel Ion Conduction.

    Directory of Open Access Journals (Sweden)

    Kota Kasahara

    Full Text Available The mechanism of ion conduction by potassium channels is one of the central issues in physiology. In particular, it is still unclear how the ion concentration and the membrane voltage drive ion conduction. We have investigated the dynamics of the ion conduction processes in the Kv1.2 pore domain, by molecular dynamics (MD simulations with several different voltages and ion concentrations. By focusing on the detailed ion movements through the pore including selectivity filter (SF and cavity, we found two major conduction mechanisms, called the III-IV-III and III-II-III mechanisms, and the balance between the ion concentration and the voltage determines the mechanism preference. In the III-IV-III mechanism, the outermost ion in the pore is pushed out by a new ion coming from the intracellular fluid, and four-ion states were transiently observed. In the III-II-III mechanism, the outermost ion is pulled out first, without pushing by incoming ions. Increases in the ion concentration and voltage accelerated ion conductions, but their mechanisms were different. The increase in the ion concentrations facilitated the III-IV-III conductions, while the higher voltages increased the III-II-III conductions, indicating that the pore domain of potassium channels permeates ions by using two different driving forces: a push by intracellular ions and a pull by voltage.

  6. Fast-ion Dα measurements of the fast-ion distribution (invited)

    International Nuclear Information System (INIS)

    Heidbrink, W. W.

    2010-01-01

    The fast-ion Dα (FIDA) diagnostic is an application of charge-exchange recombination spectroscopy. Fast ions that neutralize in an injected neutral beam emit Balmer-α light with a large Doppler shift. The spectral shift is exploited to distinguish the FIDA emission from other bright sources of Dα light. Background subtraction is the main technical challenge. A spectroscopic diagnostic typically achieves temporal, energy, and transverse spatial resolution of ∼1 ms, ∼10 keV, and ∼2 cm, respectively. Installations that use narrow-band filters achieve high spatial and temporal resolution at the expense of spectral information. For high temporal resolution, the bandpass-filtered light goes directly to a photomultiplier, allowing detection of ∼50 kHz oscillations in FIDA signal. For two-dimensional spatial profiles, the bandpass-filtered light goes to a charge-coupled device camera; detailed images of fast-ion redistribution at instabilities are obtained. Qualitative and quantitative models relate the measured FIDA signals to the fast-ion distribution function. The first quantitative comparisons between theory and experiment found excellent agreement in beam-heated magnetohydrodynamics (MHD)-quiescent plasmas. FIDA diagnostics are now in operation at magnetic-fusion facilities worldwide. They are used to study fast-ion acceleration by ion cyclotron heating, to detect fast-ion transport by MHD modes and microturbulence, and to study fast-ion driven instabilities.

  7. Rearrangement reactions in ion-ion and ion-atom collisions: results and problems

    Energy Technology Data Exchange (ETDEWEB)

    Presnyakov, L.P. [Lebedev Physical Institute, Moscow (Russian Federation); Tawara, H.

    1997-01-01

    Recent experimental and theoretical results are discussed for ionic collisions with large cross sections at intermediate and small energies of the relative motion. Single- and double-electron removal from H{sup -} ions in slow collisions with other ions is considered in more details. The theoretical methods are discussed from the viewpoint of general requirements of scattering theory. (author)

  8. Ion-ion Recombination and Chemiion Concentrations In Aircraft Exhaust

    Science.gov (United States)

    Turco, R. P.; Yu, F.

    Jet aircraft emit large quantities of ultrafine volatile aerosols, as well as soot parti- cles, into the environment. To determine the long-term effects of these emissions, a better understanding of the mechanisms that control particle formation and evolution is needed, including the number and size dispersion. A recent explanation for aerosol nucleation in a jet wake involves the condensation of sulfuric acid vapor, and cer- tain organic compounds, onto charged molecular clusters (chemiions) generated in the engine combustors (Yu and Turco, 1997). Massive charged aggregates, along with sulfuric acid and organic precursor vapors, have been detected in jet plumes under cruise conditions. In developing the chemiion nucleation theory, Yu and Turco noted that ion-ion recombination in the engine train and jet core should limit the chemiion emission index to 1017/kg-fuel. This value is consistent with ion-ion recombination coefficients of 1×10-7 cm3/s over time scales of 10-2 s. However, the evolution of the ions through the engine has not been adequately studied. The conditions at the combustor exit are extreme-temperatures approach 1500 K, and pressures can reach 30 atmospheres. In this presentation, we show that as the combustion gases expand and cool, two- and three-body ion-ion recombination processes control the chemiion concentration. The concepts of mutual neutralization and Thomson recombination are first summarized, and appropriate temperature and pressure dependent recombination rate coefficients are derived for the aircraft problem. A model for ion losses in jet exhaust is then formulated using an "invariance" principle discussed by Turco and Yu (1997) in the context of a coagulating aerosol in an expanding plume. This recombina- tion model is applied to estimate chemiion emission indices for a range of operational engine conditions. The predicted ion emission rates are found to be consistent with observations. We discuss the sources of variance in chemiion

  9. A heavy ion pre-injector for the ICT-ion implanter

    International Nuclear Information System (INIS)

    Bhattacharya, P.K.; Gaonkar, S.; Wagh, A.G.; Hattangadi, V.A.; Sarma, N.

    1976-01-01

    A cheap and versatile hollow cathode electron bombardment ion source system including its ion extraction-cum-focussing assembly for obtaining intense heavy ion beams of solids and gases is described. The extractor region is designed to include more than 15deg total beam angle of extracted beam for producing focused ion current densities upto 60mA/cm 2 to serve as a pre-injector for the ICT(insulated core transformer) type ion implanter. The extraction-cum-focussing lens is a low aberration strong Einzel lens system of all araldite and metal construction with optical elements of proper quality and location to suit low voltage injection and subsequent ion analysis. The injection can be selected anywhere between 2 to 10 keV for singly charged ions with typical extraction currents of 500/μ, using a ring anode and a source aperture of 20 mil. Einzel lens focussing assembly allows continuous adjustment of the beam convergence to about 5deg and the beam size to approximately 5mm in diameter with about 10 KV central electrode potential. Test results of source characteristics for both the accelerating and decelerating model of beam formation have been made. (author)

  10. PENGOLAHAN LIMBAH CAIR INDUSTRI FARMASI FORMULASI DENGAN METODE ANAEROB-AEROB DAN ANAEROB-KOAGULASI

    OpenAIRE

    Farida Crisnaningtyas; Hanny Vistanty

    2016-01-01

    Studi ini membahas mengenai pengolahan limbah cair industri farmasi dalam skala laboratorium dengan menggunakan konsep anaerob-kimia-fisika dan anaerob-aerob. Proses anaerob dilakukan dengan menggunakan reaktor Upflow Anaerobic Sludge Bed reactor (UASBr) pada kisaran OLR (Organic Loading Rate) 0,5 – 2 kg COD/m3hari, yang didahului dengan proses aklimatisasi menggunakan substrat gula. Proses anaerob mampu memberikan efisiensi penurunan COD hingga 74%. Keluaran dari proses anaerob diolah lebih ...

  11. Upgraded vacuum arc ion source for metal ion implantation

    International Nuclear Information System (INIS)

    Nikolaev, A. G.; Oks, E. M.; Savkin, K. P.; Yushkov, G. Yu.; Brown, I. G.

    2012-01-01

    Vacuum arc ion sources have been made and used by a large number of research groups around the world over the past twenty years. The first generation of vacuum arc ion sources (dubbed ''Mevva,'' for metal vapor vacuum arc) was developed at Lawrence Berkeley National Laboratory in the 1980s. This paper considers the design, performance parameters, and some applications of a new modified version of this kind of source which we have called Mevva-V.Ru. The source produces broad beams of metal ions at an extraction voltage of up to 60 kV and a time-averaged ion beam current in the milliampere range. Here, we describe the Mevva-V.Ru vacuum arc ion source that we have developed at Tomsk and summarize its beam characteristics along with some of the applications to which we have put it. We also describe the source performance using compound cathodes.

  12. Squeezing of Ion Populations and Peaks in Traveling Wave Ion Mobility Separations and Structures for Lossless Ion Manipulations using Compression Ratio Ion Mobility Programming

    Energy Technology Data Exchange (ETDEWEB)

    Garimella, Venkata BS; Hamid, Ahmed M.; Deng, Liulin; Ibrahim, Yehia M.; Webb, Ian K.; Baker, Erin M.; Prost, Spencer A.; Norheim, Randolph V.; Anderson, Gordon A.; Smith, Richard D.

    2016-11-02

    In this work, we report an approach for spatial and temporal gas phase ion population manipulation, and demonstrate its application for the collapse of the ion distributions in ion mobility (IM) separations into tighter packets providing higher sensitivity measurements in conjunction with mass spectrometry (MS). We do this for ions moving from a conventionally traveling wave (TW)-driven region to a region where the TW is intermittently halted or ‘stuttered’. This approach causes the ion packets spanning a number of TW-created traveling traps (TT) to be redistributed into fewer TT, resulting in spatial compression. The degree of spatial compression is controllable and determined by the ratio of stationary time of the TW in the second region to its moving time. This compression ratio ion mobility programming (CRIMP) approach has been implemented using Structures for Lossless Ion Manipulations (SLIM) in conjunction with MS. CRIMP with the SLIM-MS platform is shown to provide increased peak intensities, reduced peak widths, and improved S/N ratios with MS detection. CRIMP also provides a foundation for extremely long path length and multi-pass IM separations in SLIM providing greatly enhanced IM resolution by reducing the detrimental effects of diffusional peak broadening due to increasing peak widths.

  13. Using Ion Exchange Chromatography to Separate and Quantify Complex Ions

    Science.gov (United States)

    Johnson, Brian J.

    2014-01-01

    Ion exchange chromatography is an important technique in the separation of charged species, particularly in biological, inorganic, and environmental samples. In this experiment, students are supplied with a mixture of two substitution-inert complex ions. They separate the complexes by ion exchange chromatography using a "flash"…

  14. Simulation study on ion extraction from ECR ion sources

    International Nuclear Information System (INIS)

    Fu, S.; Kitagawa, A.; Yamada, S.

    1993-07-01

    In order to study beam optics of NIRS-ECR ion source used in HIMAC, EGUN code has been modified to make it capable of modeling ion extraction from a plasma. Two versions of the modified code are worked out with two different methods in which 1-D and 2-D sheath theories are used respectively. Convergence problem of the strong nonlinear self-consistent equations is investigated. Simulations on NIRS-ECR ion source and HYPER-ECR ion source (in INS, Univ. of Tokyo) are presented in this paper, exhibiting an agreement with the experimental results. Some preliminary suggestions on the upgrading the extraction systems of these sources are also proposed. (author)

  15. Simulation study on ion extraction from ECR ion sources

    Energy Technology Data Exchange (ETDEWEB)

    Fu, S.; Kitagawa, A.; Yamada, S.

    1993-07-01

    In order to study beam optics of NIRS-ECR ion source used in HIMAC, EGUN code has been modified to make it capable of modeling ion extraction from a plasma. Two versions of the modified code are worked out with two different methods in which 1-D and 2-D sheath theories are used respectively. Convergence problem of the strong nonlinear self-consistent equations is investigated. Simulations on NIRS-ECR ion source and HYPER-ECR ion source (in INS, Univ. of Tokyo) are presented in this paper, exhibiting an agreement with the experimental results. Some preliminary suggestions on the upgrading the extraction systems of these sources are also proposed. (author).

  16. Heavy ion program at BNL: AGS, RHIC [Relativistic Heavy Ion Collider

    International Nuclear Information System (INIS)

    Barton, D.S.

    1987-01-01

    With the recent commissioning of fixed target, heavy ion physics at the AGS, Brookhaven National Laboratory (BNL) has embarked on a long range program in support of relativistic heavy ion research. Acceleration of low mass heavy ions (up to sulfur) to an energy of about 14.5 GeV/nucleon is possible with the direct connection of the BNL Tandem Van de Graaff and AGS accelerators. When completed, the new booster accelerator will provide heavy ions over the full mass range for injection and subsequent acceleration in the AGS. BNL is now engaged in an active R and D program directed toward the proposed Relativistic Heavy Ion Collider (RHIC). The results of the first operation of the low mass heavy ion program will be reviewed, and future expectations discussed. The expected performance for the heavy ion operation of the booster will be described and finally, the current status and outlook for the RHIC facility will be presented

  17. The heavy ion injection scheme for RHIC [Relativistic Heavy Ion Collider

    International Nuclear Information System (INIS)

    Rhoades-Brown, M.J.

    1989-01-01

    The Relativistic Heavy Ion Collider (RHIC) at Brookhaven has a multi-component injection system. The Collider requires very heavy ions such as 79 197 Au to be injected fully stripped of atomic electrons, at a kinetic energy of approximately 10 GeV/nucleon. However, the heavy ions are produced initially at a negative ion source and accelerated first in a 15 MV Tandem. These partially stripped ions have a kinetic energy of approximately 1 MeV/nucleon on leaving the Tandem. In order to achieve the injection requirements for RHIC, the partially stripped ions are accelerated in the Booster (currently under construction) and pass through a stripping foil on their way to the Alternating Gradient Synchrotron (AGS), where they are further accelerated before injection into RHIC. Recent theoretical calculations have shown quite convincingly that very heavy ions with 2 electrons in the filled K-shell may be accelerated with negligible loss in the AGS. 13 refs., 3 figs., 3 tabs

  18. Auroral ion beams and ion acoustic wave generation by fan instability

    Energy Technology Data Exchange (ETDEWEB)

    Vaivads, A

    1996-04-01

    Satellite observations indicate that efficient energy transport among various plasma particles and between plasma waves and plasma particles is taking place in auroral ion beam regions. These observations show that two characteristic wave types are associated with the auroral ion beam regions: electrostatic hydrogen cyclotron waves with frequencies above hydrogen gyrofrequency, and low frequency waves with frequencies below hydrogen gyrofrequency. We speculate that the low frequency waves can be ion acoustic waves generated through the fan instability. The presence of a cold background ion component is necessary for the onset of this instability. A cold ion component has been directly observed and has been indirectly suggested from observations of solitary wave structures. The wave-particle interaction during the development of the fan instability results in an efficient ion beam heating in the direction perpendicular to the ambient magnetic field. The fan instability development and the ion beam heating is demonstrated in a numerical particle simulation. 23 refs, 16 figs.

  19. Ion Trapping, Storage, and Ejection in Structures for Lossless Ion Manipulations.

    Science.gov (United States)

    Zhang, Xinyu; Garimella, Sandilya V B; Prost, Spencer A; Webb, Ian K; Chen, Tsung-Chi; Tang, Keqi; Tolmachev, Aleksey V; Norheim, Randolph V; Baker, Erin S; Anderson, Gordon A; Ibrahim, Yehia M; Smith, Richard D

    2015-06-16

    A new Structures for Lossless Ion Manipulations (SLIM) module, having electrode arrays patterned on a pair of parallel printed circuit boards (PCB), was constructed and utilized to investigate capabilities for ion trapping at a pressure of 4 Torr. Positive ions were confined by application of RF voltages to a series of inner rung electrodes with alternating phase on adjacent electrodes, in conjunction with positive DC potentials on surrounding guard electrodes on each PCB. An axial DC field was also introduced by stepwise varying the DC potentials applied to the inner rung electrodes to control the ion transport and accumulation inside the ion trapping region. We show that ions can be trapped and accumulated with up to 100% efficiency, stored for at least 5 h with no significant losses, and then could be rapidly ejected from the SLIM trap. The present results provide a foundation for the development of much more complex SLIM devices that facilitate extended ion manipulations.

  20. Numerical Simulation of Ion Transport in a Nano-Electrospray Ion Source at Atmospheric Pressure

    Science.gov (United States)

    Wang, Wei; Bajic, Steve; John, Benzi; Emerson, David R.

    2018-03-01

    Understanding ion transport properties from the ion source to the mass spectrometer (MS) is essential for optimizing device performance. Numerical simulation helps in understanding of ion transport properties and, furthermore, facilitates instrument design. In contrast to previously reported numerical studies, ion transport simulations in a continuous injection mode whilst considering realistic space-charge effects have been carried out. The flow field was solved using Reynolds-averaged Navier-Stokes (RANS) equations, and a particle-in-cell (PIC) method was applied to solve a time-dependent electric field with local charge density. A series of ion transport simulations were carried out at different cone gas flow rates, ion source currents, and capillary voltages. A force evaluation analysis reveals that the electric force, the drag force, and the Brownian force are the three dominant forces acting on the ions. Both the experimental and simulation results indicate that cone gas flow rates of ≤250 slph (standard liter per hour) are important for high ion transmission efficiency, as higher cone gas flow rates reduce the ion signal significantly. The simulation results also show that the ion transmission efficiency reduces exponentially with an increased ion source current. Additionally, the ion loss due to space-charge effects has been found to be predominant at a higher ion source current, a lower capillary voltage, and a stronger cone gas counterflow. The interaction of the ion driving force, ion opposing force, and ion dispersion is discussed to illustrate ion transport mechanism in the ion source at atmospheric pressure. [Figure not available: see fulltext.

  1. Development of industrial ion implantation and ion assisted coating processes: A perspective

    International Nuclear Information System (INIS)

    Legg, K.O.; Solnick-Legg, H.

    1989-01-01

    Ion beam processes have gone through a series of developmental stages, from being the mainstay of the semiconductor industry for production of integrated circuits, to new commercial processes for biomedical, aerospace and other industries. Although research is still continuing on surface modification using ion beam methods, ion implantation and ion assisted coatings for treatment of metals, ceramics, polymers and composites must now be considered viable industrial processes of benefit in a wide variety of applications. However, ion implantation methods face various barriers to acceptability, in terms not only of other surface treatment processes, but for implantation itself. This paper will discuss some of the challenges faced by a small company whose primary business is development and marketing of ion implantation and ion-assisted coating processes. (orig.)

  2. Fully kinetic simulation of ion acoustic and dust-ion acoustic waves

    International Nuclear Information System (INIS)

    Hosseini Jenab, S. M.; Kourakis, I.; Abbasi, H.

    2011-01-01

    A series of numerical simulations is presented, based on a recurrence-free Vlasov kinetic model using kinetic phase point trajectories. All plasma components are modeled kinetically via a Vlasov evolution equation, then coupled through Poisson's equation. The dynamics of ion acoustic waves in an electron-ion and in a dusty (electron-ion-dust) plasma configuration are investigated, focusing on wave decay due to Landau damping and, in particular, on the parametric dependence of the damping rate on the dust concentration and on the electron-to-ion temperature ratio. In the absence of dust, the occurrence of damping was observed, as expected, and its dependence to the relative magnitude of the electron vs ion temperature(s) was investigated. When present, the dust component influences the charge balance, enabling dust-ion acoustic waves to survive Landau damping even in the extreme regime where T e ≅ T i . The Landau damping rate is shown to be minimized for a strong dust concentration or/and for a high value of the electron-to-ion temperature ratio. Our results confirm earlier theoretical considerations and contribute to the interpretation of experimental observations of dust-ion acoustic wave characteristics.

  3. Neutralized ion beam modification of cellulose membranes for study of ion charge effect on ion-beam-induced DNA transfer

    Science.gov (United States)

    Prakrajang, K.; Sangwijit, K.; Anuntalabhochai, S.; Wanichapichart, P.; Yu, L. D.

    2012-02-01

    Low-energy ion beam biotechnology (IBBT) has recently been rapidly developed worldwide. Ion-beam-induced DNA transfer is one of the important applications of IBBT. However, mechanisms involved in this application are not yet well understood. In this study plasma-neutralized ion beam was applied to investigate ion charge effect on induction of DNA transfer. Argon ion beam at 7.5 keV was neutralized by RF-driven plasma in the beam path and then bombarded cellulose membranes which were used as the mimetic plant cell envelope. Electrical properties such as impedance and capacitance of the membranes were measured after the bombardment. An in vitro experiment on plasmid DNA transfer through the cellulose membrane was followed up. The results showed that the ion charge input played an important role in the impedance and capacitance changes which would affect DNA transfer. Generally speaking, neutral particle beam bombardment of biologic cells was more effective in inducing DNA transfer than charged ion beam bombardment.

  4. Response of thermal ions to electromagnetic ion cyclotron waves

    Science.gov (United States)

    Anderson, B. J.; Fuselier, S. A.

    1994-01-01

    Electromagnetic ion cyclotron waves generated by 10 - 50 keV protons in the Earth's equatorial magnetosphere will interact with the ambient low-energy ions also found in this region. We examine H(+) and He(+) distribution functions from approx. equals 1 to 160 eV using the Hot Plasma Composition Experiment instrument on AMPTE/CCE to investigate the thermal ion response to the waves. A total of 48 intervals were chosen on the basis of electromagnetic ion cyclotron (EMIC) wave activity: 24 with prevalent EMIC waves and 24 with no EMIC waves observed on the orbit. There is a close correlation between EMIC waves and perpendicular heated ion distributions. For protons the perpendicular temperature increase is modest, about 5 eV, and is always observed at 90 deg pitch angles. This is consistent with a nonresonant interaction near the equator. By contrast, He(+) temperatures during EMIC wave events averaged 35 eV and sometimes exceeded 100 eV, indicating stronger interaction with the waves. Furthermore, heated He(+) ions have X-type distributions with maximum fluxes occurring at pitch angles intermediate between field-aligned and perpendicular directions. The X-type He(+) distributions are consistent with a gyroresonant interaction off the equator. The concentration of He(+) relative to H(+) is found to correlate with EMIC wave activity, but it is suggested that the preferential heating of He(+) accounts for the apparent increase in relative He(+) concentration by increasing the proportion of He(+) detected by the ion instrument.

  5. Production of C, N, O, and Ne ions by pulsed ion source and acceleration of these ions in the cyclotron

    International Nuclear Information System (INIS)

    Nakajima, Hisao; Kohara, Shigeo; Kageyama, Tadashi; Kohno, Isao

    1977-01-01

    The heavy ion source, of electron bombarded hot cathode type, is usually operated by applying direct current for arc discharge. In order to accelerate Ne 6+ ion in the cyclotron, a pulsed operation of this source was attempted. Ne 6+ and O 6+ ions were accelerated successfully up to 160 MeV and more than 0.1 μA of these ion were extracted from the cyclotron. C 5+ , Ne 7+ and 22 Ne 6+ ions were also extracted with a modest intensity of beam. The intensity of C 4+ , N 4+ , N 5+ , and O 5+ ions was increased about ten times. (auth.)

  6. Hybrid Lithium-ion Capacitor / Lithium-ion Battery System for Extended Performance

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed task will involve the design of a hybrid power system with lithium-ion (li-ion) capacitors (LICs), li-ion batteries and solar cells. The challenge in...

  7. KLASIFIKASI WEBSITE MENGGUNAKAN ALGORITMA MULTILAYER PERCEPTRON

    Directory of Open Access Journals (Sweden)

    Nyoman Purnama

    2014-12-01

    Full Text Available Sistem klasifikasi merupakan proses temu balik informasi yang sangat bergantung dari elemen-elemen penyusunnya.Sistem ini banyak digunakan untuk mengatasi permasalahan segmentasi data. Klasifikasi dapat digunakan pada website sebagaimetode untuk mengelompokkan website. Website merupakan salah satu data yang memiliki informasi yang beraneka-ragam,sehingga pengelompokan data ini penting untuk diteliti. Sistem klasifikasi dimulai dengan melakukan proses pengumpulaninformasi dari halaman website (parsing dan untuk setiap hasil parsing dilakukan proses penghapusan kata henti, stemming,feature selection dengan tf-idf. Hasil dari proses ini berupa fitur yang menjadi inputan algoritma Multilayer Perceptron. Dalamalgoritma ini terjadi proses pembelajaran terhadap pola input masukan dan pembuatan bobot pelatihan. Bobot ini akandigunakan pada proses klasifikasi. Hasil dari penelitian menunjukkan bahwa algoritma Multilayer Perceptron dapatmenghasilkan klasifikasi website dengan akurasi yang bagus. Hal ini dibuktikan dengan beberapa tahapan penelitian yangberbeda dan didapatkan nilai akurasi rata-rata diatas 70%.

  8. HISTORICAL PROSE ON «COSSACKS» IN THE COLLECTIONS OF THE UNIVERSITY LIBRARY AND ITS ROLE IN THE EVENTS OF UKRAINIAN REVOLUTION OF 1917-1921

    Directory of Open Access Journals (Sweden)

    Д. В. Кобельський

    2017-02-01

    of the 20th century about the Cossacks and their role in events of 1917-1921 that is in funds of Scientific Library of the Odessa I. I. Mechnikov National University. The main objective of article is to expand knowledge of the unique editions, which are contained in a meeting of university library. On concrete examples, it is shown how the historical prose, ideologically influenced participants of events, the essence of use of the idea of the Cossacks by warring parties in race for power in Ukraine is disclosed 1917-1921. The popularity reasons of “the Cossack myth” in the Ukrainian people are established. In article, various parties of events of that time in the territory of Ukraine pay special attention to the analysis of various forms of involvement of the Cossacks. The main contribution of work, consists in what has been tracked library marks on this subject, clarifications of owners of books, are tracked bibliographic notes and dedicatory inscriptions and so forth. Results of a research have practical value for all who are interested in history of the Ukrainian revolution of 1917-1921, the Ukrainian historical fiction the beginning of the 20th century and history of Scientific Library of University.

  9. Metal negative ion beam extraction from a radio frequency ion source

    Energy Technology Data Exchange (ETDEWEB)

    Kanda, S.; Yamada, N.; Kasuya, T.; Romero, C. F. P.; Wada, M.

    2015-04-08

    A metal ion source of magnetron magnetic field geometry has been designed and operated with a Cu hollow target. Radio frequency power at 13.56 MHz is directly supplied to the hollow target to maintain plasma discharge and induce self-bias to the target for sputtering. The extraction of positive and negative Cu ion beams have been tested. The ion beam current ratio of Cu{sup +} to Ar{sup +} has reached up to 140% when Ar was used as the discharge support gas. Cu{sup −} ion beam was observed at 50 W RF discharge power and at a higher Ar gas pressure in the ion source. Improvement of poor RF power matching and suppression of electron current is indispensable for a stable Cu{sup −} ion beam production from the source.

  10. Ion-temperature-gradient-driven modes in bi-ion magnetoplasma

    Energy Technology Data Exchange (ETDEWEB)

    Batool, Nazia; Mirza, Arshad M [Theoretical Plasma Physics Group, Department of Physics, Quaid-i-Azam University, Islamabad 45320 (Pakistan); Qamar, Anisa [Department of Physics, Peshawar University, NWFP 25120 (Pakistan)], E-mail: nazia.batool@ncp.edu.pk

    2008-12-15

    The toroidal ion-temperature-gradient (ITG)-driven electrostatic drift waves are investigated for bi-ion plasmas with equilibrium density, temperature and magnetic field gradients. Using Braginskii's transport equations for the ions and Boltzmann distributed electrons, the mode coupling equations are derived. New ITG-driven modes are shown to exist. The results of the present study should be helpful to understand several wave phenomena in space and tokamak plasmas.

  11. Proceedings of the 'INS workshop on ECR ion sources for multiply-charged heavy ions'

    International Nuclear Information System (INIS)

    1995-02-01

    This workshop was held on December 1 and 2, 1994 at the Institute for Nuclear Study, University of Tokyo. The performance of ion sources is crucial for all researches and applications that use ion beam. The performance of ECR ion sources is strongly dependent on heuristic knowledge and innovation. From these viewpoints, it is useful to exchange information on the status of the existing sources, the performance of the new sources, and the design of the future sources between the source builders and the users. There were unexpected more than 70 participants and 20 contributions. The lectures were given on the present status of NIRS-ECR, SF-ECR, INS ISOL-ECR, RCNP ECR and EBIS ion sources, the production of multiply charged metallic ions with Hyper ECR or by plasma cathode method, the processing of ceramic rods and the ion production with OCTOPUS, the modeling of multi-charged ion production, the design of an advanced minimum B for ECR multi-charged ion source, the design, construction and operation of 18 GHz HiECR ion source, the construction and test operation of JAERI 18 GHz ion source, the design of an ECR ion source for the HIMAC, a 14.5 GHz ECR ion source at RIKEN, TMU 14 GHz ECR ion source, ''NANOGAN'' ECR ion source and its irradiation system, the optimization of the ECR ion source for optically pumped polarized ion source and so on. (K.I.)

  12. Proceedings of the `INS workshop on ECR ion sources for multiply-charged heavy ions`

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-01

    This workshop was held on December 1 and 2, 1994 at the Institute for Nuclear Study, University of Tokyo. The performance of ion sources is crucial for all researches and applications that use ion beam. The performance of ECR ion sources is strongly dependent on heuristic knowledge and innovation. From these viewpoints, it is useful to exchange information on the status of the existing sources, the performance of the new sources, and the design of the future sources between the source builders and the users. There were unexpected more than 70 participants and 20 contributions. The lectures were given on the present status of NIRS-ECR, SF-ECR, INS ISOL-ECR, RCNP ECR and EBIS ion sources, the production of multiply charged metallic ions with Hyper ECR or by plasma cathode method, the processing of ceramic rods and the ion production with OCTOPUS, the modeling of multi-charged ion production, the design of an advanced minimum B for ECR multi-charged ion source, the design, construction and operation of 18 GHz HiECR ion source, the construction and test operation of JAERI 18 GHz ion source, the design of an ECR ion source for the HIMAC, a 14.5 GHz ECR ion source at RIKEN, TMU 14 GHz ECR ion source, ``NANOGAN`` ECR ion source and its irradiation system, the optimization of the ECR ion source for optically pumped polarized ion source and so on. (K.I.).

  13. Specific ion effects on membrane potential and the permselectivity of ion exchange membranes.

    Science.gov (United States)

    Geise, Geoffrey M; Cassady, Harrison J; Paul, Donald R; Logan, Bruce E; Hickner, Michael A

    2014-10-21

    Membrane potential and permselectivity are critical parameters for a variety of electrochemically-driven separation and energy technologies. An electric potential is developed when a membrane separates electrolyte solutions of different concentrations, and a permselective membrane allows specific species to be transported while restricting the passage of other species. Ion exchange membranes are commonly used in applications that require advanced ionic electrolytes and span technologies such as alkaline batteries to ammonium bicarbonate reverse electrodialysis, but membranes are often only characterized in sodium chloride solutions. Our goal in this work was to better understand membrane behaviour in aqueous ammonium bicarbonate, which is of interest for closed-loop energy generation processes. Here we characterized the permselectivity of four commercial ion exchange membranes in aqueous solutions of sodium chloride, ammonium chloride, sodium bicarbonate, and ammonium bicarbonate. This stepwise approach, using four different ions in aqueous solution, was used to better understand how these specific ions affect ion transport in ion exchange membranes. Characterization of cation and anion exchange membrane permselectivity, using these ions, is discussed from the perspective of the difference in the physical chemistry of the hydrated ions, along with an accompanying re-derivation and examination of the basic equations that describe membrane potential. In general, permselectivity was highest in sodium chloride and lowest in ammonium bicarbonate solutions, and the nature of both the counter- and co-ions appeared to influence measured permselectivity. The counter-ion type influences the binding affinity between counter-ions and polymer fixed charge groups, and higher binding affinity between fixed charge sites and counter-ions within the membrane decreases the effective membrane charge density. As a result permselectivity decreases. The charge density and polarizability

  14. PIROLISIS LIGNIN DARI LIMBAH INDUSTRI KELAPA SAWIT UNTUK PENGEMBANGAN SURFAKTAN DALAM PROSES ENHANCE OIL RECOVERY (EOR (Pyrolysis of Lignin From Waste of Palm Oil Industries for The Development of Surfactants for Enhance Oil Recovery (EOR

    Directory of Open Access Journals (Sweden)

    Suryo Purwono

    2001-12-01

    Full Text Available ABSTRAK Pirolisis dari lignin yang berasal dari limbah industri kelapa sawit dapat menghasilkan alkohol dan derivatif lainnyd yang dapat digunakan sehagai surfaktan. Prosedur penelitian proses pirolisis ini odalah sebagai berikut: I serabut atau tandan sisa pengolahon kelapa sawit yang sudah dikeringkan dimasukkan kedalam reaktor dengan berat tertentu dan dipanaskan sampai suhu yang diinginkan, 2 produk pirolisis yang keluar dari reoktor kemudian didinginkan sampoi mencapai suhu kamor, 3 hasil cair ditampung didalam gelas ukur dan hasil gasnya ditampung di suatu botol tertentu. Suhu paling baik yang dicapai adalah 4A0 "C untuk lignin yong berasal dari serabut dan 350'C untuk lignin yang berasal dari tandan kelapa sawit. Surfaktan yang dihasilkan sekitar j4 sampai 38% dari produk pirolisis. Pada penelitian ini kecepatan reaksi dianggap order satu. Hasil penelitian menunjukkan bahwa surfakton yang dihasilkan dapat membentuk emulsi dengan minyak menta.h. Hal ini menunjukkon bahwa surfaktan yang dihasilkan dapat digunakan sebagai bahan untuk proses EOR.   ABSTRACT Pyrolysis of lignin from waste of palm oil industries produces alcohol and its derivatives which can be sulfonated to become surfactant. The experimental procedures for the pyrolysis process were as follows: 1 dried palm oil husks at a certain weight were put into the pyrolysis reactor and heated up to a certain temperafure; 2 the product leaving the reactor was cooled down to room temperature; and 3 the liquid product was collected in a flask while the gas product was put into a big bottle. The best temperature obtained for producing liquid product was 400 oC for lignin from palm oil fruit fibers and 350 oC for lignin from palm oil fruit stems. The surfactant developed was in the range between 34 and 38% from the pyrolysis product. In this experiment, the reaction rate was assumed to be in first order. The result showed that the surfactant obtained from the experiment could form emulsion

  15. Space-charge compensation of highly charged ion beam from laser ion source

    International Nuclear Information System (INIS)

    Kondrashev, S.A.; Collier, J.; Sherwood, T.R.

    1996-01-01

    The problem of matching an ion beam delivered by a high-intensity ion source with an accelerator is considered. The experimental results of highly charged ion beam transport with space-charge compensation by electrons are presented. A tungsten thermionic cathode is used as a source of electrons for beam compensation. An increase of ion beam current density by a factor of 25 is obtained as a result of space-charge compensation at a distance of 3 m from the extraction system. The process of ion beam space-charge compensation, requirements for a source of electrons, and the influence of recombination losses in a space-charge-compensated ion beam are discussed. (author)

  16. Ion sources for initial use at the Holifield radioactive ion beam facility

    International Nuclear Information System (INIS)

    Alton, G.D.

    1994-01-01

    The Holifield Radioactive Ion Beam Facility (HRIBF) now under construction at the Oak Ridge National Laboratory will use the 25-MV tandem accelerator for the acceleration of radioactive ion beams to energies appropriate for research in nuclear physics; negative ion beams are, therefore, required for injection into the tandem accelerator. Because charge exchange is an efficient means for converting initially positive ion beams to negative ion beams, both positive and negative ion sources are viable options for use at the facility; the choice of the type of ion source will depend on the overall efficiency for generating the radioactive species of interest. A high-temperature version of the CERN-ISOLDE positive ion source has been selected and a modified version of the source designed and fabricated for initial use at the HRIBF because of its low emittance, relatively high ionization efficiencies and species versatility, and because it has been engineered for remote installation, removal and servicing as required for safe handling in a high-radiation-level ISOL facility. Prototype plasma-sputter negative ion sources and negative surfaceionization sources are also under design consideration for generating negative radioactive ion beams from high electron-affinity elements. A brief review of the HRIBF will be presented, followed by a detailed description of the design features, operational characteristics, ionization efficiencies, and beam qualities (emittances) of these sources

  17. Evaluation of Negative-Ion-Beam Driver Concepts for Heavy Ion Fusion

    International Nuclear Information System (INIS)

    Grisham, Larry R.

    2002-01-01

    We evaluate the feasibility of producing and using atomically neutral heavy ion beams produced from negative ions as drivers for an inertial confinement fusion reactor. Bromine and iodine appear to be the most attractive elements for the driver beams. Fluorine and chlorine appear to be the most appropriate feedstocks for initial tests of extractable negative ion current densities. With regards to ion sources, photodetachment neutralizers, and vacuum requirements for accelerators and beam transport, this approach appears feasible within existing technology, and the vacuum requirements are essentially identical to those for positive ion drivers except in the target chamber. The principal constraint is that this approach requires harder vacuums in the target chamber than do space-charge-neutralized positive ion drivers. With realistic (but perhaps pessimistic) estimates of the total ionization cross section, limiting the ionization of a neutral beam to less than 5% while traversing a four -meter path would require a chamber pressure of no more than 5 x 10 -5 torr. Alternatively, even at chamber pressures that are too high to allow propagation of atomically neutral beams, the negative ion approach may still have appeal, since it precludes the possibly serious problem of electron contamination of a positive ion beam during acceleration, drift compression, and focusing

  18. The ion polytropic coefficient in a collisionless sheath containing hot ions

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Binbin; Xiang, Nong, E-mail: xiangn@ipp.ac.cn; Ou, Jing [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); Center for Magnetic Fusion Theory, Chinese Academy of Sciences, Hefei 230031 (China)

    2016-08-15

    The fluid approach has been widely used to study plasma sheath dynamics. For a sheath containing hot ions whose temperature is greater than the electron's, how to truncate the fluid hierarchy chain equations while retaining to the fullest extent of the kinetic effects is always a difficult problem. In this paper, a one-dimensional, collisionless sheath containing hot ions is studied via particle-in-cell simulations. By analyzing the ion energy equation and taking the kinetic effects into account, we have shown that the ion polytropic coefficient in the vicinity of the sheath edge is approximately constant so that the state equation with the modified polytropic coefficient can be used to close the hierarchy chain of the ion fluid equations. The value of the polytropic coefficient strongly depends on the hot ion temperature and its concentration in the plasma. The semi-analytical model is given to interpret the simulation results. As an application, the kinetic effects on the ion saturation current density in the probe theory are discussed.

  19. Ion mobility spectrometry

    CERN Document Server

    Eiceman, GA

    2005-01-01

    Key Developments for Faster, More Precise Detection Capabilities Driven by the demand for the rapid and advanced detection of explosives, chemical and biological warfare agents, and narcotics, ion mobility spectrometry (IMS) undergone significant refinements in technology, computational capabilities, and understanding of the principles of gas phase ion chemistry and mobility. Beginning with a thorough discussion of the fundamental theories and physics of ion mobility, Ion Mobility Spectrometry, Second Edition describes the recent advances in instrumentation and newly

  20. Duopigatron ion source studies

    International Nuclear Information System (INIS)

    Bacon, F.M.; Bickes, R.W. Jr.; O'Hagan, J.B.

    1978-07-01

    Ion source performance characteristics consisting of total ion current, ion energy distribution, mass distribution, and ion current density distribution were measured for several models of a duopigatron. Variations on the duopigatron design involved plasma expansion cup material and dimensions, secondary cathode material, and interelectrode spacings. Of the designs tested, the one with a copper and molybdenum secondary cathode and a mild steel plasma expansion cup proved to give the best results. The ion current density distribution was peaked at the center of the plasma expansion cup and fell off to 80 percent of the peak value at the cup wall for a cup 15.2 mm deep. A total ion current of 180 mA consisting of 60 to 70 percent atomic ions was produced with an arc current of 20 A and source pressure of 9.3 Pa. More shallow cups produced a larger beam current and a more sharply peaked ion current density distribution. Typical ion energy distributions were bell-shaped curves with a peak 10 to 20 V below anode potential and with ion energies extending 30 to 40 V on either side of the peak

  1. C-terminal peptide extension via gas-phase ion/ion reactions

    Science.gov (United States)

    Peng, Zhou; McLuckey, Scott A.

    2015-01-01

    The formation of peptide bonds is of great importance from both a biological standpoint and in routine organic synthesis. Recent work from our group demonstrated the synthesis of peptides in the gas-phase via ion/ion reactions with sulfo-NHS reagents, which resulted in conjugation of individual amino acids or small peptides to the N-terminus of an existing ‘anchor’ peptide. Here, we demonstrate a complementary approach resulting in the C-terminal extension of peptides. Individual amino acids or short peptides can be prepared as reagents by incorporating gas phase-labile protecting groups to the reactive C-terminus and then converting the N-terminal amino groups to the active ketenimine reagent. Gas-phase ion/ion reactions between the anionic reagents and doubly protonated “anchor” peptide cations results in extension of the “anchor” peptide with new amide bond formation at the C-terminus. We have demonstrated that ion/ion reactions can be used as a fast, controlled, and efficient means for C-terminal peptide extension in the gas phase. PMID:26640400

  2. Cobalt alloy ion sources for focused ion beam implantation

    Energy Technology Data Exchange (ETDEWEB)

    Muehle, R.; Doebeli, M. [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Zimmermann, P. [Eidgenoessische Technische Hochschule, Zurich (Switzerland)

    1997-09-01

    Cobalt alloy ion sources have been developed for silicide formation by focused ion beam implantation. Four eutectic alloys AuCo, CoGe, CoY and AuCoGe were produced by electron beam welding. The AuCo liquid alloy ion source was investigated in detail. We have measured the emission current stability, the current-voltage characteristics, and the mass spectrum as a function of the mission current. (author) 1 fig., 2 refs.

  3. Studies on indigenous ion exchange resins: alkali metal ions-hydrogen ion exchange equilibria

    International Nuclear Information System (INIS)

    Shankar, S.; Kumar, Surender; Venkataramani, B.

    2001-01-01

    With a view to select a suitable ion exchange resin for the removal of radionuclides (such as cesium, strontium etc.) from low level radioactive effluents, alkali metal ion -H' exchanges on nine indigenous gel- and macroporous-type and nuclear grade resins have been studied at a total ionic strength of 0.1 mol dm .3 (in the case ofCs' -H' exchange it was 0.05 mol dm .3 ). The expected theoretical capacities were not attained by all the resins for the alkali metal ions. The water content (moles/equiv.) of the fully swollen resins for different alkali metal ionic forms do not follow the usual sequence of greater the tendency of the cation to hydrate the higher the water uptake, but a reverse trend. The ion exchange isotherms (plots of equivalent fractions of the ion in resin phase, N M1 to that in solution, N M ) were not satisfactory and sorption of cations, for most of the resins, was possible only when the acidity of the solution was lowered. The variations of the selectivity coefficient, K, with N M show that the resins are highly cross linked and the selectivity sequence: Cs + >K + >Na + >Li + , obtained for all the resins indicate that hydrated ions were involved in the exchange process. However, the increase in the selectivity was not accompanied by the release of water, but unusual uptake of water, during the exchange process. The characteristics of macroporous resins were not significantly different from those of the gel-type resins. The results are discussed in terms of heterogeneity in the polymer net work, improper sulphonation process resulting in the formation of functional groups at inaccessible sites with weak acidic character and the overall lack of control in the preparation of different resins. (author)

  4. Maximizing Ion Current by Space Charge Neutralization using Negative Ions and Dust Particles

    International Nuclear Information System (INIS)

    Smirnov, A.; Raitses, Y.; Fisch, N.J.

    2005-01-01

    Ion current extracted from an ion source (ion thruster) can be increased above the Child-Langmuir limit if the ion space charge is neutralized. Similarly, the limiting kinetic energy density of the plasma flow in a Hall thruster might be exceeded if additional mechanisms of space charge neutralization are introduced. Space charge neutralization with high-mass negative ions or negatively charged dust particles seems, in principle, promising for the development of a high current or high energy density source of positive light ions. Several space charge neutralization schemes that employ heavy negatively charged particles are considered. It is shown that the proposed neutralization schemes can lead, at best, only to a moderate but nonetheless possibly important increase of the ion current in the ion thruster and the thrust density in the Hall thruster

  5. Ion-selective electrode reviews

    CERN Document Server

    Thomas, J D R

    1982-01-01

    Ion-Selective Electrode Reviews, Volume 3, provides a review of articles on ion-selective electrodes (ISEs). The volume begins with an article on methods based on titration procedures for surfactant analysis, which have been developed for discrete batch operation and for continuous AutoAnalyser use. Separate chapters deal with detection limits of ion-selective electrodes; the possibility of using inorganic ion-exchange materials as ion-sensors; and the effect of solvent on potentials of cells with ion-selective electrodes. Also included is a chapter on advances in calibration procedures, the d

  6. An all permanent magnet electron cyclotron resonance ion source for heavy ion therapy.

    Science.gov (United States)

    Cao, Yun; Li, Jia Qing; Sun, Liang Ting; Zhang, Xue Zhen; Feng, Yu Cheng; Wang, Hui; Ma, Bao Hua; Li, Xi Xia

    2014-02-01

    A high charge state all permanent Electron Cyclotron Resonance ion source, Lanzhou All Permanent ECR ion source no. 3-LAPECR3, has been successfully built at IMP in 2012, which will serve as the ion injector of the Heavy Ion Medical Machine (HIMM) project. As a commercial device, LAPECR3 features a compact structure, small size, and low cost. According to HIMM scenario more than 100 eμA of C(5+) ion beam should be extracted from the ion source, and the beam emittance better than 75 π*mm*mrad. In recent commissioning, about 120 eμA of C(5+) ion beam was got when work gas was CH4 while about 262 eμA of C(5+) ion beam was obtained when work gas was C2H2 gas. The design and construction of the ion source and its low-energy transportation beam line, and the preliminary commissioning results will be presented in detail in this paper.

  7. Nonlinear dust-ion-acoustic waves in a multi-ion plasma with ...

    Indian Academy of Sciences (India)

    The basic features of such dust-ion-acoustic solitary and shock waves have been ... ion plasmas because of its vital role in understanding different types of ... cannot support the usual ion-acoustic waves, but can support the DIA waves of ...

  8. Low energy ion beam dynamics of NANOGAN ECR ion source

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Sarvesh, E-mail: sarvesh@iuac.res.in; Mandal, A.

    2016-04-01

    A new low energy ion beam facility (LEIBF) has been developed for providing the mass analyzed highly charged intense ion beams of energy ranging from a few tens of keV to a few MeV for atomic, molecular and materials sciences research. The new facility consists of an all permanent magnet 10 GHz electron cyclotron resonance (ECR) ion source (NANOGAN) installed on a high voltage platform (400 kV) which provides large currents of multiply charged ion beams. Higher emittance at low energy of intense ion beam puts a tremendous challenge to the beam optical design of this facility. The beam line consists of mainly the electrostatic quadrupoles, an accelerating section, analyzing cum switching magnet and suitable beam diagnostics including vacuum components. The accelerated ion beam is analyzed for a particular mass to charge (m/q) ratio as well as guided to three different lines along 75°, 90° and 105° using a large acceptance analyzing cum switching magnet. The details of transverse beam optics to all the beam lines with TRANSPORT and GICOSY beam optics codes are being described. Field computation code, OPERA 3D has been utilized to design the magnets and electrostatic quadrupoles. A theoretical estimation of emittance for optimized geometry of ion source is given so as to form the basis of beam optics calculations. The method of quadrupole scan of the beam is used to characterize the emittance of the final beam on the target. The measured beam emittance increases with m/q ratios of various ion beams similar to the trend observed theoretically.

  9. Radioactive ion beam production challenges at the Holifield Heavy Ion Research Facility

    International Nuclear Information System (INIS)

    Meigs, M.J.; Alton, G.D.; Dowling, D.T.; Haynes, D.L.; Jones, C.M.; Juras, R.C.; Lane, S.N.; Mills, G.D.; Mosko, S.W.; Olsen, D.K.; Tatum, B.A.

    1992-01-01

    The radioactive ion beam (RIB) project at the Holifield Heavy Ion Research Facility (HHIRF) will provide for reconfiguration of the HHIRF accelerator system to enable provision of low-intensity RIBs for nuclear and astrophysics research. As we have progressed with the design of the reconfiguration, we have encountered several challenges that were not immediately obvious when first contemplating the project. The challenges do not seem insurmountable but should keep life interesting for those of us doing the work. A brief review of the project will allow a better understanding of the challenges in RIB production. Radioactive ion beams will be produced with the Isotope Separator On-Line (ISOL) postacceleration technique. In particular, radioactive atoms will be produced by reactions in the thick stopping target of an ISOL-type target-ion source assembly using intense beams from the Oak Ridge Isochronous Cyclotron equipped with a light-ion internal source. This ISOL target-ion source assembly will be mounted on a high-voltage platform with a mass separator. The target ion source will operate at potentials up to 50 kV with respect to the high voltage platform. The radioactive atoms produced by nuclear reactions in the target diffuse to the surface of the heated target material, desorb from this surface, and effuse through a heated transfer tube into an ion source where ionization and extraction take place. Two types of ion sources will be initially considered. A Forced Electron Beam Induced Arc Discharge source, similar to those used by the ISOLDE facility at CERN and by the UNISOR facility at ORNL, will be built to produce positive ions. These positive ions will be focused through an alkali vapor charge-exchange canal to produce negative ions for tandem injection. In addition, a direct negative surface ionization addition or modification to the above source will be built and investigated

  10. Improvement of highly charged ion production in the ECR source of heavy ions

    International Nuclear Information System (INIS)

    Shirkov, G.D.

    1996-01-01

    Some physical limitations of the highly charged ion production in the ECR source are analyzed in this report. A few possible ways to improve the output of highly charged ions from the ECR source for heavy ions are proposed. A new library of computer codes for the numerical simulation of heavy ion production in the ECR ion source is used to examine these ways to improve the ECR source operation according to the CERN program of heavy ion acceleration. copyright 1996 American Institute of Physics

  11. Plasma focus as an heavy ion source in the problem of heavy ion fusion

    International Nuclear Information System (INIS)

    Gribkov, V.A.; Dubrovskij, A.V.; Kalachev, N.V.; Krokhin, O.N.; Silin, P.V.; Nikulin, V.Ya.; Cheblukov, Yu.N.

    1984-01-01

    Results of experiments on the ion flux formation in a plasma focus (PF) to develop a multicharged ion source for thermonuclear facility driver are presented. In plasma focus accelerating section copper ions were injected. Advantages of the suggested method of ion beam formation are demonstrated. Beam emittance equalling < 0.1 cmxmrad is obtained. Plasma focus ion energy exceeds 1 MeV. Plasma focus in combination with a neodymium laser is thought to be a perspective ion source for heavy ion fusion

  12. Analisis Sistem Antrian di Departemen Washing pada PT Mark Dynamics Indonesia dengan Menggunakan Teknik Simulasi ProModel

    OpenAIRE

    Limbong, Maraden

    2010-01-01

    Salah satu proses pada pembuatan cetakan sarung tangan di PT. Mark Dynamics Indonesia yaitu proses pencucian yang dilakukan di departemen Washing. Proses pencucian ini lini produksinya di bagi atas 3 lini dimana jenis ukuran yang harus dikerjakan terdiri dari 3 jenis yaitu small, medium dan large dimana waktu pengerjaannya berbeda-beda. Pada proses ini, tiap lini terdiri dari 20 orang dengan waktu kerja normal selama 400 menit (6,67 jam) per hari dengan persentase input ukuran yang masuk dal...

  13. Ion-ion and ion-solvent interactions in lithium imidazolide electrolytes studied by Raman spectroscopy and DFT models.

    Science.gov (United States)

    Scheers, Johan; Niedzicki, Leszek; Zukowska, Grażyna Z; Johansson, Patrik; Wieczorek, Władysław; Jacobsson, Per

    2011-06-21

    Molecular level interactions are of crucial importance for the transport properties and overall performance of ion conducting electrolytes. In this work we explore ion-ion and ion-solvent interactions in liquid and solid polymer electrolytes of lithium 4,5-dicyano-(2-trifluoromethyl)imidazolide (LiTDI)-a promising salt for lithium battery applications-using Raman spectroscopy and density functional theory calculations. High concentrations of ion associates are found in LiTDI:acetonitrile electrolytes, the vibrational signatures of which are transferable to PEO-based LiTDI electrolytes. The origins of the spectroscopic changes are interpreted by comparing experimental spectra with simulated Raman spectra of model structures. Simple ion pair models in vacuum identify the imidazole nitrogen atom of the TDI anion to be the most important coordination site for Li(+), however, including implicit or explicit solvent effects lead to qualitative changes in the coordination geometry and improved correlation of experimental and simulated Raman spectra. To model larger aggregates, solvent effects are found to be crucial, and we finally suggest possible triplet and dimer ionic structures in the investigated electrolytes. In addition, the effects of introducing water into the electrolytes-via a hydrate form of LiTDI-are discussed.

  14. OPTIMALISASI PEMECAHAN MASALAH TRANSPORTASI MENGGUNAKAN METODE NWC, INPEKSI, DAN VAM

    Directory of Open Access Journals (Sweden)

    Ni Ketut Kertiasih

    2013-08-01

    Full Text Available Sistem optimalisasi dalam pemecahan masalah transportasi menggunakan metode NWC (north west corner, INPEKSI (matrik minimum, dan VAM (Vogel Approximation Method adalah sebuah sistem yang dibangun dan difungsikan sebagai sistem yang diharapkan mampu mengetahui biaya paling minimum dalam pengalokasian barang dengan membandingkan tiga metode tersebut. Sistem ini memiliki kelebihan dalam proses input, keakuratan proses perhitungan dan proses pengerjaan lebih cepat dari proses perhitungan secara manual. Sistem ini digunakan untuk melakukan proses input jumlah gudang, input jumlah pabrik, biaya satuan dari tiap-tiap pabrik menuju tiap-tiap gudang, hasil produksi tiap pabrik, dan kapasitas gudang, selanjutnya dilakukan proses perhitungan dengan menggunakan ketiga metode tersebut. Sistem ini dibangun dengan menggunakan visual basic 6.0 dan microsoft office accsess 2007 sebagai basis datanya. Sistem ini diharapkan dapat mempermudah pengguna dalam penyelesaian masalah pendistribusian barang dari pabrik ke masing-masing gudang.   Kata-kata  kunci :  Optimalisasi, NWC, INPEKSI dan VAM

  15. Experiments on secondary ion emission with multicharged keV ion bombardement

    International Nuclear Information System (INIS)

    Della Negra, S.; Depauw, J.; Joret, H.; Le Beyec, Y.; Schweikert, E.A.

    1987-01-01

    An electron cyclotron resonance ion source was used to study the influence of the incident charge state of keV ions on secondary ion emission. The experiments were run with 18 keV Arn+ (1 < n < 11) beams produced by a minimafios source. Various types of targets were bombarded by the ion beam and the sputtered ionized species were identified by time of flight mass spectrometry. The experimental arrangement is detailed and preliminary results are indicated

  16. A heating mechanism of ions due to large amplitude coherent ion acoustic wave

    International Nuclear Information System (INIS)

    Yajima, Nobuo; Kawai, Yoshinobu; Kogiso, Ken.

    1978-05-01

    Ion heating mechanism in a plasma with a coherent ion acoustic wave is studied experimentally and numerically. Ions are accelerated periodically in the electrostatic potential of the coherent wave and their oscillation energy is converted into the thermal energy of ions through the collision with the neutral atoms in plasma. The Monte Carlo calculation is applied to obtain the ion temperature. The amplitude of the electrostatic potential, the mean number of collisions and the mean life time of ions are treated as parameters in the calculation. The numerical results are compared with the experiments and both of them agree well. It is found that the ion temperature increases as the amplitude of the coherent wave increases and the high energy tail in the distribution function of ions are observed for the case of large wave-amplitude. (author)

  17. Molecular and negative ion production by a standard electron cyclotron resonance ion source

    Energy Technology Data Exchange (ETDEWEB)

    Racz, R. [Institute of Nuclear Research (ATOMKI), Bem ter 18/c, H-4026 Debrecen (Hungary); University of Debrecen, Egyetem ter 1, H-4010 Debrecen (Hungary); Biri, S.; Juhasz, Z.; Sulik, B. [Institute of Nuclear Research (ATOMKI), Bem ter 18/c, H-4026 Debrecen (Hungary); Palinkas, J. [University of Debrecen, Egyetem ter 1, H-4010 Debrecen (Hungary)

    2012-02-15

    Molecular and negative ion beams, usually produced in special ion sources, play an increasingly important role in fundamental and applied atomic physics. The ATOMKI-ECRIS is a standard ECR ion source, designed to provide highly charged ion (HCI) plasmas and beams. In the present work, H{sup -}, O{sup -}, OH{sup -}, O{sub 2}{sup -}, C{sup -}, C{sub 60}{sup -} negative ions and H{sub 2}{sup +}, H{sub 3}{sup +}, OH{sup +}, H{sub 2}O{sup +}, H{sub 3}O{sup +}, O{sub 2}{sup +} positive molecular ions were generated in this HCI-ECRIS. Without any major modification in the source and without any commonly applied tricks (such as usage of cesium or magnetic filter), negative ion beams of several {mu}A and positive molecular ion beams in the mA range were successfully obtained.

  18. Ion hole formation and nonlinear generation of electromagnetic ion cyclotron waves: THEMIS observations

    Science.gov (United States)

    Shoji, Masafumi; Miyoshi, Yoshizumi; Katoh, Yuto; Keika, Kunihiro; Angelopoulos, Vassilis; Kasahara, Satoshi; Asamura, Kazushi; Nakamura, Satoko; Omura, Yoshiharu

    2017-09-01

    Electromagnetic plasma waves are thought to be responsible for energy exchange between charged particles in space plasmas. Such an energy exchange process is evidenced by phase space holes identified in the ion distribution function and measurements of the dot product of the plasma wave electric field and the ion velocity. We develop a method to identify ion hole formation, taking into consideration the phase differences between the gyromotion of ions and the electromagnetic ion cyclotron (EMIC) waves. Using this method, we identify ion holes in the distribution function and the resulting nonlinear EMIC wave evolution from Time History of Events and Macroscale Interactions during Substorms (THEMIS) observations. These ion holes are key to wave growth and frequency drift by the ion currents through nonlinear wave-particle interactions, which are identified by a computer simulation in this study.

  19. Ion Dynamics at Shocks: Ion Reflection and Beam Formation at Quasi-perpendicular Shocks

    International Nuclear Information System (INIS)

    Kucharek, Harald; Moebius, Eberhard

    2005-01-01

    The physics of collisionless shocks is controlled by the ion dynamics. The generation of gyrating ions by reflection as well as the formation of field-aligned ion beams are essential parts of this dynamic. On the one hand reflection is most likely the first interaction of ions with the shock before they undergo the downstream thermalization process. On the other hand field-aligned ion beams, predominately found at the quasi-perpendicular bow shock, propagate into the distant foreshock region and may create wave activity. We revisit ion reflection, the source and basic production mechanism of field-aligned ion beams, by using multi-spacecraft measurements and contrast these observations with existing theories. Finally, we propose an alternative production mechanism

  20. Generation and focusing of intense ion beams with an inverse pinch ion diode

    International Nuclear Information System (INIS)

    Hashimoto, Yoshiyuki; Sato, Morihiko; Yatsuzuka, Mitsuyasu; Nobuhara, Sadao

    1992-01-01

    Generation and focusing of ion beams using an inverse pinch ion diode with a flat anode has been studied. The ion beams generated with the inverse pinch ion diode were found to be focused at 120 mm from the anode by the electrostatic field in the diode. The energy and maximum current density of the ion beams were 180 keV and 420 A/cm 2 , respectively. The focusing angle of the ion beams was 4.3deg. The beam brightness was estimated to be 1.3 GW/cm 2 ·rad 2 . The focusing distance of the ion beams was found to be controllable by changing the diameters of the anode and cathode. (author)

  1. Behaviour of tetraalkylammonium ions in high-field asymmetric waveform ion mobility spectrometry.

    Science.gov (United States)

    Aksenov, Alexander A; Kapron, James T

    2010-05-30

    High-field asymmetric waveform ion mobility spectrometry (FAIMS) is an ion-filtering technique recently adapted for use with liquid chromatography/mass spectrometry (LC/MS) to remove interferences during analysis of complex matrices. This is the first systematic study of a series of singly charged tetraalkylammonium ions by FAIMS-MS. The compensation voltage (CV) is the DC offset of the waveform which permits the ion to emerge from FAIMS and it was determined for each member of the series under various conditions. The electrospray ionization conditions explored included spray voltage, vaporizer temperature, and sheath and auxiliary gas pressure. The FAIMS conditions explored included carrier gas flow rate, electrode temperature and composition of the carrier gas. Optimum desolvation was achieved using sufficient carrier gas (flow rate > or = 2 L/min) to ensure stable response. Low-mass ions (m/z 100-200) are more susceptible to changes in electrode temperature and gas composition than high mass ions (m/z 200-700). As a result of this study, ions are reliably analyzed using standard FAIMS conditions (dispersion voltage -5000 V, carrier gas flow rate 3 L/min, 50% helium/50%nitrogen, inner electrode temperature 70 degrees C and outer electrode temperature 90 degrees C). Variation of FAIMS conditions may be of great use for the separation of very low mass tetraalkylammonium (TAA) ions from other TAA ions. The FAIMS conditions do not appear to have a major effect on higher mass ions. Copyright 2010 John Wiley & Sons, Ltd.

  2. Specific ion effects on membrane potential and the permselectivity of ion exchange membranes

    KAUST Repository

    Geise, Geoffrey M.

    2014-08-26

    © the Partner Organisations 2014. Membrane potential and permselectivity are critical parameters for a variety of electrochemically-driven separation and energy technologies. An electric potential is developed when a membrane separates electrolyte solutions of different concentrations, and a permselective membrane allows specific species to be transported while restricting the passage of other species. Ion exchange membranes are commonly used in applications that require advanced ionic electrolytes and span technologies such as alkaline batteries to ammonium bicarbonate reverse electrodialysis, but membranes are often only characterized in sodium chloride solutions. Our goal in this work was to better understand membrane behaviour in aqueous ammonium bicarbonate, which is of interest for closed-loop energy generation processes. Here we characterized the permselectivity of four commercial ion exchange membranes in aqueous solutions of sodium chloride, ammonium chloride, sodium bicarbonate, and ammonium bicarbonate. This stepwise approach, using four different ions in aqueous solution, was used to better understand how these specific ions affect ion transport in ion exchange membranes. Characterization of cation and anion exchange membrane permselectivity, using these ions, is discussed from the perspective of the difference in the physical chemistry of the hydrated ions, along with an accompanying re-derivation and examination of the basic equations that describe membrane potential. In general, permselectivity was highest in sodium chloride and lowest in ammonium bicarbonate solutions, and the nature of both the counter- and co-ions appeared to influence measured permselectivity. The counter-ion type influences the binding affinity between counter-ions and polymer fixed charge groups, and higher binding affinity between fixed charge sites and counter-ions within the membrane decreases the effective membrane charge density. As a result permselectivity decreases. The

  3. Observations of strong ion-ion correlations in dense plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Ma, T.; Fletcher, L.; Pak, A.; Chapman, D. A.; Falcone, R. W.; Fortmann, C.; Galtier, E.; Gericke, D. O.; Gregori, G.; Hastings, J.; Landen, O. L.; Le Pape, S.; Lee, H. J.; Nagler, B.; Neumayer, P.; Turnbull, D.; Vorberger, J.; White, T. G.; Wünsch, K.; Zastrau, U.; Glenzer, S. H.; Döppner, T.

    2014-05-01

    Using simultaneous spectrally, angularly, and temporally resolved x-ray scattering, we measure the pronounced ion-ion correlation peak in a strongly coupled plasma. Laser-driven shock-compressed aluminum at ~3× solid density is probed with high-energy photons at 17.9 keV created by molybdenum He-α emission in a laser-driven plasma source. The measured elastic scattering feature shows a well-pronounced correlation peak at a wave vector of k=4k=4Å-1. The magnitude of this correlation peak cannot be described by standard plasma theories employing a linear screened Coulomb potential. Advanced models, including a strong short-range repulsion due to the inner structure of the aluminum ions are however in good agreement with the scattering data. These studies have demonstrated a new highly accurate diagnostic technique to directly measure the state of compression and the ion-ion correlations. We have since applied this new method in single-shot wave-number resolved S(k) measurements to characterize the physical properties of dense plasmas.

  4. New experimental initiatives using very highly charged ions from an 'electron beam ion trap'

    International Nuclear Information System (INIS)

    Schneider, D.

    1996-01-01

    A short review of the experimental program in highly-charged heavy ion physics conducted at the Lawrence Livermore National Laboratory Electron Beam Ion Trap (EBIT) facility is presented. The heavy-ion research, involving ions up to fully stripped U 92+ , includes precision x-ray spectroscopy and lifetime studies, electron impact ionization and excitation cross section measurements. The investigations of ion-surface interactions following the impact of high-Z highly charged ions on surfaces are aimed to study the neutralization dynamics effecting the ion and the response of the surface as well. (author)

  5. Development of exploding wire ion source for intense pulsed heavy ion beam accelerator

    International Nuclear Information System (INIS)

    Ochiai, Y.; Murata, T.; Ito, H.; Masugata, K.

    2012-01-01

    A Novel exploding wire type ion source device is proposed as a metallic ion source of intense pulsed heavy ion beam (PHIB) accelerator. In the device multiple shot operations is realized without breaking the vacuum. The basic characteristics of the device are evaluated experimentally with an aluminum wire of diameter 0.2 mm, length 25 mm. Capacitor bank of capacitance 3 μF, charging voltage 30 kV was used and the wire was successfully exploded by a discharge current of 15 kA, rise time 5.3 μs. Plasma flux of ion current density around 70 A/cm 2 was obtained at 150 mm downstream from the device. The drift velocity of ions evaluated by a time-of-flight method was 2.7x10 4 m/sec, which corresponds to the kinetic energy of 100 eV for aluminum ions. From the measurement of ion current density distribution ion flow is found to be concentrated to the direction where ion acceleration gap is placed. From the experiment the device is found to be acceptable for applying PHIB accelerator. (author)

  6. An all permanent magnet electron cyclotron resonance ion source for heavy ion therapy

    Energy Technology Data Exchange (ETDEWEB)

    Cao, Yun, E-mail: caoyun@impcas.ac.cn; Li, Jia Qing; Sun, Liang Ting; Zhang, Xue Zhen; Feng, Yu Cheng; Wang, Hui; Ma, Bao Hua; Li, Xi Xia [Institute of Modern Physics, CAS, Lanzhou 730000 (China)

    2014-02-15

    A high charge state all permanent Electron Cyclotron Resonance ion source, Lanzhou All Permanent ECR ion source no. 3-LAPECR3, has been successfully built at IMP in 2012, which will serve as the ion injector of the Heavy Ion Medical Machine (HIMM) project. As a commercial device, LAPECR3 features a compact structure, small size, and low cost. According to HIMM scenario more than 100 eμA of C{sup 5+} ion beam should be extracted from the ion source, and the beam emittance better than 75 π*mm*mrad. In recent commissioning, about 120 eμA of C{sup 5+} ion beam was got when work gas was CH{sub 4} while about 262 eμA of C{sup 5+} ion beam was obtained when work gas was C{sub 2}H{sub 2} gas. The design and construction of the ion source and its low-energy transportation beam line, and the preliminary commissioning results will be presented in detail in this paper.

  7. Recent advances in high current vacuum arc ion sources for heavy ion fusion

    CERN Document Server

    Qi Nian Sheng; Prasad, R R; Krishnan, M S; Anders, A; Kwan, J; Brown, I

    2001-01-01

    For a heavy ion fusion induction linac driver, a source of heavy ions with charge states 1+-3+, approx 0.5 A current beams, approx 20 mu s pulse widths and approx 10 Hz repetition rates is required. Thermionic sources have been the workhorse for the Heavy Ion Fusion (HIF) program to date, but suffer from heating problems for large areas and contamination. They are limited to low (contact) ionization potential elements and offer relatively low ion fluxes with a charge state limited to 1+. Gas injection sources suffer from partial ionization and deleterious neutral gas effects. The above shortcomings of the thermionic ion sources can be overcome by a vacuum arc ion source. The vacuum arc ion source is a good candidate for HIF applications. It is capable of providing ions of various elements and different charge states in short and long pulse bursts and high beam current density. Under a Phase-I STTR from DOE, the feasibility of the vacuum arc ion source for the HIF applications was investigated. We have modifie...

  8. Anomalous surface behavior of hydrated guanidinium ions due to ion pairing

    Science.gov (United States)

    Ekholm, Victor; Vazdar, Mario; Mason, Philip E.; Bialik, Erik; Walz, Marie-Madeleine; Öhrwall, Gunnar; Werner, Josephina; Rubensson, Jan-Erik; Jungwirth, Pavel; Björneholm, Olle

    2018-04-01

    Surface affinity of aqueous guanidinium chloride (GdmCl) is compared to that of aqueous tetrapropylammonium chloride (TPACl) upon addition of sodium chloride (NaCl) or disodium sulfate (Na2SO4). The experimental results have been acquired using the surface sensitive technique X-ray photoelectron spectroscopy on a liquid jet. Molecular dynamics simulations have been used to produce radial distribution functions and surface density plots. The surface affinities of both TPA+ and Gdm+ increase upon adding NaCl to the solution. With the addition of Na2SO4, the surface affinity of TPA+ increases, while that of Gdm+ decreases. From the results of MD simulations it is seen that Gdm+ and SO4 2 - ions form pairs. This finding can be used to explain the decreased surface affinity of Gdm+ when co-dissolved with SO4 2 - ions. Since SO4 2 - ions avoid the surface due to the double charge and strong water interaction, the Gdm+-SO4 2 - ion pair resides deeper in the solutions' bulk than the Gdm+ ions. Since TPA+ does not form ion pairs with SO4 2 -, the TPA+ ions are instead enriched at the surface.

  9. Energy landscapes for mobile ions in ion conducting solids

    Indian Academy of Sciences (India)

    molecular dynamics (MD) simulations yields quantitative predictions of the ion transport characteristics. As ... Solid electrolytes; bond valence analysis; ion transport in glasses. 1. .... clusters are considered to contribute only to a.c. conduc-.

  10. Penilaian Tingkat Kemapanan Tata Kelola Teknologi Informasi Berbasis COBIT 4.1 Pada Layanan Portal Akademik Online (Studi Kasus : UIN Maulana Malik Ibrahim Malang

    Directory of Open Access Journals (Sweden)

    Fachrul Kurniawan

    2014-09-01

    Full Text Available Pemanfaatan TI dalam dunia pendidikan merupakan hal yang sangat penting untuk menunjang kegiatan akademiknya. Termasuk juga di Universitas Islam Negeri Maulana Malik Ibrahim Malang yang terkenal dengan sistem administrasi akademik online atau biasa disebut siakad. Namun dalam pemanfatan tersebut belum bisa diketahui sejauh mana TI yang digunakan bisa mendukung proses bisnis yang ada di universitas, khususnya yang terkait dengan layanan akademik online. Oleh karena itu perlu adanya penilaian resmi dan prosedural terkait kualitas tata kelola TI pada layanan portal akademik online. Proses penilaian tata kelola TI ini menggunakan framework COBIT 4.1. Penelitian ini dilakukan di Lembaga Pengembangan Sistem Informasi (LPSI. Dalam proses penilaian tata kelola TI tersebut COBIT 4.1 menggunakan sistem pemetaan proses bisnis sehingga terpilih proses TI terkait COBIT atau dengan diagram value chain. Hasil dari pemetaan proses bisnis berdasarkan COBIT 4.1 terpilih proses TI DS1 Define and manage service levels dan DS4 Ensure continuous service sebagai acuan penilaian dengan hasil perhitungan tingkat kemapanan kedua proses TI pada level 3 (Defined. Namun LPSI memiliki keinginan dan harapan besar dalam meningkatkan tingkat kemapanan TI yang semakin baik, yaitu tata kelola yang optimal. Hal ini ditunjukkan dari hasil perhitungan tingkat kemapanan yang diharapkan (to-be , yaitu berada pada level 5 (Optimised. Kata kunci : tingkat kemapanan, tata kelola ti, COBIT, portal akademik online.

  11. DETERMINATION OF STRONTIUM IONS IN WATERS WITH A HIGH CONTENT OF SODIUM IONS

    Directory of Open Access Journals (Sweden)

    Tatiana Mitina

    2015-06-01

    Full Text Available This paper reports on the influence of sodium ions on experimental determination of strontium ions concentration in waters with a high content of sodium ions by using emission flame photometry and atomic absorption spectroscopy. For the method of emission flame photometry it was shown that at a wavelength of 460.7 nm (spectral emission line of strontium the emission is linearly dependent on the concentration of sodium ions. The greatest impact of high concentrations of sodium ions on the result of determination the strontium ions concentration has been registered at low levels of strontium. The influence of nitric acid on the results is also discussed. In the case of using atomic absorption spectroscopy method no influence of sodium ions and nitric acid on the results of determination the strontium ions concentration was revealed. The metrological characteristics of both methods are evaluated.

  12. An ion beam deceleration lens for ultra-low-energy ion bombardment of naked DNA

    Energy Technology Data Exchange (ETDEWEB)

    Thopan, P.; Prakrajang, K. [Plasma and Beam Physics Research Facility, Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Thongkumkoon, P. [Plasma and Beam Physics Research Facility, Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Thailand Center of Excellence in Physics, Commission on Higher Education, 328 Si Ayutthaya Road, Bangkok 10400 (Thailand); Suwannakachorn, D. [Plasma and Beam Physics Research Facility, Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Yu, L.D., E-mail: yuldyuld@gmail.com [Plasma and Beam Physics Research Facility, Department of Physics and Materials Science, Faculty of Science, Chiang Mai University, Chiang Mai 50200 (Thailand); Thailand Center of Excellence in Physics, Commission on Higher Education, 328 Si Ayutthaya Road, Bangkok 10400 (Thailand)

    2013-07-15

    Highlights: ► An ion beam deceleration lens was designed and constructed. ► The deceleration lens was installed and tested. ► The decelerated ion beam energy was measured using an electrical field. ► Decelerated ultra-low-energy ion beam bombarded naked DNA. ► Ion beam with energy of a few tens of eV could break DNA strands. -- Abstract: Study of low-energy ion bombardment effect on biological living materials is of significance. High-energy ion beam irradiation of biological materials such as organs and cells has no doubt biological effects. However, ion energy deposition in the ion-bombarded materials dominantly occurs in the low-energy range. To investigate effects from very-low-energy ion bombardment on biological materials, an ion beam deceleration lens is necessary for uniform ion energy lower than keV. A deceleration lens was designed and constructed based on study of the beam optics using the SIMION program. The lens consisted of six electrodes, able to focus and decelerate primary ion beam, with the last one being a long tube to obtain a parallel uniform exiting beam. The deceleration lens was installed to our 30-kV bioengineering-specialized ion beam line. The final decelerated-ion energy was measured using a simple electrostatic field to bend the beam to range from 10 eV to 1 keV controlled by the lens parameters and the primary beam condition. In a preliminary test, nitrogen ion beam at 60 eV decelerated from a primary 20-keV beam bombarded naked plasmid DNA. The original DNA supercoiled form was found to change to relaxed and linear forms, indicating single or double strand breaks. The study demonstrated that the ion bombardment with energy as low as several-tens eV was possible to break DNA strands and thus potential to cause genetic modification of biological cells.

  13. An ion beam deceleration lens for ultra-low-energy ion bombardment of naked DNA

    International Nuclear Information System (INIS)

    Thopan, P.; Prakrajang, K.; Thongkumkoon, P.; Suwannakachorn, D.; Yu, L.D.

    2013-01-01

    Highlights: ► An ion beam deceleration lens was designed and constructed. ► The deceleration lens was installed and tested. ► The decelerated ion beam energy was measured using an electrical field. ► Decelerated ultra-low-energy ion beam bombarded naked DNA. ► Ion beam with energy of a few tens of eV could break DNA strands. -- Abstract: Study of low-energy ion bombardment effect on biological living materials is of significance. High-energy ion beam irradiation of biological materials such as organs and cells has no doubt biological effects. However, ion energy deposition in the ion-bombarded materials dominantly occurs in the low-energy range. To investigate effects from very-low-energy ion bombardment on biological materials, an ion beam deceleration lens is necessary for uniform ion energy lower than keV. A deceleration lens was designed and constructed based on study of the beam optics using the SIMION program. The lens consisted of six electrodes, able to focus and decelerate primary ion beam, with the last one being a long tube to obtain a parallel uniform exiting beam. The deceleration lens was installed to our 30-kV bioengineering-specialized ion beam line. The final decelerated-ion energy was measured using a simple electrostatic field to bend the beam to range from 10 eV to 1 keV controlled by the lens parameters and the primary beam condition. In a preliminary test, nitrogen ion beam at 60 eV decelerated from a primary 20-keV beam bombarded naked plasmid DNA. The original DNA supercoiled form was found to change to relaxed and linear forms, indicating single or double strand breaks. The study demonstrated that the ion bombardment with energy as low as several-tens eV was possible to break DNA strands and thus potential to cause genetic modification of biological cells

  14. Pulsed, Inductively Generated, Streaming Plasma Ion Source for Heavy Ion Fusion Linacs

    International Nuclear Information System (INIS)

    Steven C. Glidden; Howard D Sanders; John B. Greenly; Daniel L. Dongwoo

    2006-01-01

    This report describes a compact, high current density, pulsed ion source, based on electrodeless, inductively driven gas breakdown, developed to meet the requirements on normalized emittance, current density, uniformity and pulse duration for an ion injector in a heavy-ion fusion driver. The plasma source produces >10 (micro)s pulse of Argon plasma with ion current densities >100 mA/cm2 at 30 cm from the source and with strongly axially directed ion energy of about 80 eV, and sub-eV transverse temperature. The source has good reproducibility and spatial uniformity. Control of the current density during the pulse has been demonstrated with a novel modulator coil method which allows attenuation of the ion current density without significantly affecting the beam quality. This project was carried out in two phases. Phase 1 used source configurations adapted from light ion sources to demonstrate the feasibility of the concept. In Phase 2 the performance of the source was enhanced and quantified in greater detail, a modulator for controlling the pulse shape was developed, and experiments were conducted with the ions accelerated to >40 kV

  15. Ion-selective electrode reviews

    CERN Document Server

    Thomas, J D R

    1985-01-01

    Ion-Selective Electrode Reviews, Volume 7 is a collection of papers that covers the applications of electrochemical sensors, along with the versatility of ion-selective electrodes. The coverage of the text includes solid contact in membrane ion-selective electrodes; immobilized enzyme probes for determining inhibitors; potentiometric titrations based on ion-pair formation; and application of ion-selective electrodes in soil science, kinetics, and kinetic analysis. The text will be of great use to chemists and chemical engineers.

  16. PEMETAAN BOBOT RISIKO DAN TINGKAT KEMAPANAN TEKNOLOGI INFORMASI MENUJU INTEGRASI EMPAT LEMBAGA PENDIDIKAN YPT MENGGUNAKAN COBIT 4.1

    Directory of Open Access Journals (Sweden)

    Sisilia Sari Dewi

    2017-04-01

    Full Text Available Penggabungan dari empat pendidikan tinggi di bawah Yayasan Pendidikan Telkom (YPT merupakan wujud implementasi visi YPT dalam mencapai world class university. Namun tidak dapat dipungkiri bahwa hal tersebut memunculkan tingkat kekhawatiran yang berbeda-beda terhadap suatu risiko pada proses TI yang sudah dijalankan. Begitu pula dengan tingkat kemapanan setiap proses TI yang merealisasikan sasaran pengendalian. Maka dari itu, perlu dibuat pemetaan terhadap profil risiko dan tingkat kemapanan pada masing-masing lembaga. Penelitian berfokus pada domain Plan and Organise,yang bertujuan untuk mendapatkan pemetaan proses TI di Telkom University berdasarkan COBIT 4.1, pemetaan profil risiko dan tingkat kemapanan di empat fakultas dengan kuadran prioritas, serta untuk mendapatkan teknik pengendalian umum untuk merealisasikan sasaran pengendalian dalam rangka integrasi manajemen menjadi Telkom University. Hasil penelitian menunjukkan bahwa keempat lembaga pendidikan tinggi yang bergabung menjadi Telkom University memiliki bobot risiko dan tingkat kemapanan proses TI yang berbeda-beda. Selain itu, proses-proses TI yang sudah dijalankan oleh masing-masing lembaga juga berbeda-beda. Berdasarkan hal tersebut, Telkom University sebaiknya melakukan integrasi terhadap pengelolaan teknologi informasi serta menerapkan langkah-langkah prioritas untuk proses TI yang berada dalam kuadran under-controlled

  17. Pembuatan Sistem Informasi Penatausahaan Surat dan Arsip Berbasis Web Studi Kasus Kantor Pelayanan Perbendaharaan Negara Bengkulu

    Directory of Open Access Journals (Sweden)

    Triyono Triyono

    2013-09-01

    Full Text Available Penatausahaan surat dan arsip merupakan kegiatan pendukung bagi pelaksanaan tugas pokok Kantor Pelayanan Perbendaharaan Negara (KPPN Bengkulu. Kegiatan ini ditangani oleh Sub Bagian Umum KPPN. Saat ini terdapat beberapa aplikasi penatausahaan surat maupun arsip yang dibuat oleh beberapa pegawai pada Direktorat Jenderal Perbendaharaan yang digunakan secara terpisah pada beberapa KPPN. Pada umumnya aplikasi ini tidak mengakomodasi proses yang melibatkan bagian-bagian di KPPN, dan belum digunakan sepenuhnya. KPPN bahkan lebih memilih penatausahaan dengan cara manual daripada dengan menggunakan aplikasi yang ada. Penatausahaan yang dilakukan dengan cara manual menyebabkan inefisiensi, redundansi data, kesulitan dalam proses pencarian surat dan pengawasan proses penatausahaan surat kurang dapat dilakukan. Sistem informasi penatausahaan surat dan arsip pada KPPN Bengkulu akan dikembangkan untuk meningkatkan kualitas proses dengan bahasa pemrograman inti PHP dan MySQL sebagai pendukung sistem manajemen basis data. Aplikasi ini akan mengakomodasi proses-proses yang melibatkan unit eselon IV pada KPPN, monitoring penyelesaian surat dan penyimpanan arsip elektronik baik surat masuk maupun surat keluar. Sistem informasi ini dikembangkan melalui proses ICONIX. Hasil dari penelitian ini merupakan aplikasi yang berguna untuk penatausahaan surat dan arsip bagi KPPN Bengkulu.

  18. Pembuatan Sistem Informasi Pendidikan dan Pelatihan dalam Jabatan Berbasis Web pada Bagian Pengembangan Pegawai Direktorat Jenderal Perbendaharaan

    Directory of Open Access Journals (Sweden)

    Rachmat Gerhantara

    2013-09-01

    Full Text Available Sebagai organisasi yang dinamis, Direktorat Jenderal Perbendaharaan sering mengalami perubahan yang disesuaikan dengan kebutuhan atas perbendaharaan negara. Oleh sebab itu, seluruh pegawai dituntut untuk bisa dengan cepat beradaptasi dengan perubahan – perubahan yang terjadi pada Ditjen Perbendaharaan tersebut. Proses Adaptasi tersebut dilaksanakan dengan berbagai cara, salah satunya dengan pelaksanaan pendidikan dan pelatihan (diklat dalam jabatan. Pada Direktorat Jenderal (Ditjen Perbendaharaan pelaksanaan diklat dalam jabatan selama ini diadministrasikan oleh Bagian Pengembangan Pegawai Sekretariat Ditjen (Setditjen Perbendaharaan. Proses administrasi selama ini dilakukan dengan semi manual, dimana permintaan dan pendaftaran calon peserta diklat dilakukan secara manual. Sedangkan untuk administrasi data peserta maupun lulusan proses diklat telah menggunakan aplikasi desktop yang bersifat stand-alone. Telah dirancang sebuah sistem informasi mengenai pendidikan dan pelatihan berbasis web yang mengambil sumber dari proses bisnis yang ditetapkan pada Bagian Pengembangan Pegawai Sekretariat Direktorat Jenderal Perbendaharaan. Proses perancangan yang dilakukan berbasis pada iconix process yang tersusun atas proses analisa kebutuhan, Penyusunan Domain Model, Use Case Diagram, Robustness Diagram, Sequence Diagram, Class Diagram dan GUI Storyboard. Hasil dari tulisan ini adalah sebuah prototipe sistem informasi pendidikan dan pelatihan berbasis web yang dapat digunakan untuk melakukan proses automasi pendaftaran serta administrasi hasil diklat yang telah dilaksanakan.

  19. ’n Kort herbetragting van Uys Krige se prosa met verwysing na 'The dream' as sleutelteks

    Directory of Open Access Journals (Sweden)

    J. L. Marais

    1988-05-01

    Full Text Available Uys Krigc’s prose has always received less attention from scholars of the Afrikaans literature than his poetry, translations and plays, Krige was never awarded any Afrikaans literary prize for his prose, which evoked comparatively little interest from Afrikaans scholars. This article discusses possible reasons for the above situation regarding Krige’s prose, followed by a critical discussion of several factors that were decisive in the canonization of Krige as a poet, translator and playwright rather than as a prose writer. These include factors such as the reception of Krige’s prose in comparison with the other genres that he practised, and the compilation of anthologies, a practice by which texts are published in a context that differs from the original. The short story “The dream” (from The dream and the desert, 1953 is then discussed briefly, indicating several key features of Krige’s prose as contained in this text. The article concludes with a view that a reassessment of Krige’s work will probably show him to have been a better prose writer than a poet, contrary to past and, to a large extent, present assumptions.

  20. Observation of ion-acoustic rarefaction solitons in a multicomponent plasma with negative ions

    International Nuclear Information System (INIS)

    Ludwig, G.O.; Ferreira, J.L.; Nakamura, Y.

    1984-01-01

    The propagation of ion-acoustic solitons in a plasma with negative ions has been observed. For sufficiently large concentration of negative ions, applied rarefactive (negative) voltage pulses break up into solitons, whereas compressive pulses evolve into wave trains, with exactly the opposite behavior as that for a plasma composed only of positive ions. There is a critical value of the negative-ion concentration for which a finite-amplitude pulse propagates without steepening

  1. High charge state metal ion production in vacuum arc ion sources

    International Nuclear Information System (INIS)

    Brown, I.G.; Anders, A.; Anders, S.

    1994-01-01

    The vacuum arc is a rich source of highly ionized metal plasma that can be used to make a high current metal ion source. Vacuum arc ion sources have been developed for a range of applications including ion implantation for materials surface modification, particle accelerator injection for fundamental nuclear physics research, and other fundamental and applied purposes. Typically the source is repetitively pulsed with pulse length of order a millisecond and duty cycle or order 1% and operation of a dc embodiment has been demonstrated also. Beams have been produced from over 50 of the solid metals of the periodic table, with mean ion energy up to several hundred keV and with peak (pulsed) beam current up to several amperes. The ion charge state distribution has been extensively studied. Ion spectra have been measured for a wide range of metallic cathode materials, including Li, C, Mg, Al, Si, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ge, Sr, Y, Zr, Nb, Mo, Pd, Ag, Cd, In, Sn, Sb, Ba, La, Ce, Pr, Nd, Sm, Gd, Dy, Ho, Er, Tm, Yb, Hf, Ta, W, Ir, Pt, Au, Pb, Bi, Th and U, as well as compound and alloy cathode materials such as TiC, SiC, UC, PbS, brass, and stainless steel. The ions generated are in general multiply-stripped with a mean charge state of from 1 to 3, depending on the particular metal species, and the charge state distribution can have components from Q = 1+ to 6+. Here the authors review the characteristics of vacuum arc ion sources from the perspective of their high charge state metal ion production

  2. Utilization of ion source 'SUPERSHYPIE' in the study of low energy ion-atom and ion-molecule collisions

    International Nuclear Information System (INIS)

    Bazin, V.; Boduch, P.; Chesnel, J.Y.; Fremont, F.; Lecler, D.; Pacquet, J. Y.; Gaubert, G.; Leroy, R.

    1999-01-01

    Modifications in the ECR 4M ion source are described, which conducted to realization of the advanced source 'SUPERSHYPIE'. The Ar 8+ ion collision with Cs(6s,6p) were studied by photon spectroscopy at low energy, where the process is dominated by simple electron capture. Results obtained with 'SUPERSHYPIE' source are presented. The source was utilized also in ion-molecule collisions (CO, H 2 ) to study the spectra of recoil ions and Auger electron spectra in the Ar 17+ He collisions. The excellent performances of 'SUPERSHYPIE' in high charge production and concerning its accurate and fine control and stability are illustrated and underlined as compared with those of ECR 4M source

  3. Complexation ion-exchange chromatography of some metal ions on papers impregnated with Ti(IV)-based inorganic ion exchangers.

    Science.gov (United States)

    Sharma, S D; Gupta, R

    2000-02-01

    The chromatographic behavior of 40 metal ions is studied on titanium (IV) arsenate, titanium (IV) phosphate-, titanium (IV) molybdate-, titanium(IV) tungstate-, and titanium(IV) selenite-impregnated papers in 0.1M oxalic, citric, and tartaric acid as mobile phases. Similar studies are carried out on Whatman No. 1 papers for comparison. The ion-exchange capacity of these papers is determined, and their selectivity for different cations is discussed. The mechanism of migration is explained in terms of ion-exchange, precipitation, and adsorption. The prediction of elution sequence from RF values is also checked. The average Ri is found to be almost linearly dependent on the charge of the metal ions. The effect of the pKa of complexing acids on average RF values of 3d series metal ions is explained. A number of binary and ternary separations are achieved.

  4. Ion beam stabilization in ion implantation equipment

    International Nuclear Information System (INIS)

    Pina, L.

    1973-01-01

    The results are presented of experimental efforts aimed at ion beam current stabilization in an equipment for ion implantation in solids. The related problems of power supplies are discussed. Measured characteristics of laboratory equipment served the determination of the parameters to be required of the supplies as well as the design and the construction of the supplies. The respective wiring diagram is presented. (J.K.)

  5. Structure of ion-implanted ceramics

    International Nuclear Information System (INIS)

    Naramoto, Hiroshi

    1983-01-01

    The variation of structure of LiF, MgO, Al 2 O 3 and TiO 2 accompanying annealing after ion implantation is explained. The analysis of structure is usually made by the perturbed gamma ray angular correlation, the internal electron Moessbauer method, or the ion scattering method. The results of analyses are discussed for alkali ion implantation, Fe-ion implantation, In-ion implantation, Au-ion implantation, Pt-ion implantation, Pb-ion implantation and transition metal ion implantation. The coupling of the implanted elements with lattice defects and matrix elements, and the compatibility between deposited elements and matrix crystal lattice were studied. The variation of physical properties due to ion implantation such as phase transition, volume change, the control of single crystal region, and the variation of hardness near surface were investigated, and the examples are presented. (Kato, T.)

  6. Ion optics of RHIC EBIS

    Energy Technology Data Exchange (ETDEWEB)

    Pikin, A.; Alessi, J.; Beebe, E.; Kponou, A.; Okamura, M.; Raparia, D.; Ritter, J.; Tan, Y.; Kuznetsov, G.

    2011-09-10

    RHIC EBIS has been commissioned to operate as a versatile ion source on RHIC injection facility supplying ion species from He to Au for Booster. Except for light gaseous elements RHIC EBIS employs ion injection from several external primary ion sources. With electrostatic optics fast switching from one ion species to another can be done on a pulse to pulse mode. The design of an ion optical structure and the results of simulations for different ion species are presented. In the choice of optical elements special attention was paid to spherical aberrations for high-current space charge dominated ion beams. The combination of a gridded lens and a magnet lens in LEBT provides flexibility of optical control for a wide range of ion species to satisfy acceptance parameters of RFQ. The results of ion transmission measurements are presented.

  7. Ion beam analysis of metal ion implanted surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Evans, P.J.; Chu, J.W.; Johnson, E.P.; Noorman, J.T. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia); Sood, D.K. [Royal Melbourne Inst. of Tech., VIC (Australia)

    1993-12-31

    Ion implantation is an established method for altering the surface properties of many materials. While a variety of analytical techniques are available for the characterisation of implanted surfaces, those based on particle accelerators such as Rutherford backscattering (RBS) and nuclear reaction analysis (NRA) provide some of the most useful and powerful for this purpose. Application of the latter techniques to metal ion implantation research at ANSTO will be described with particular reference to specific examples from recent studies. Where possible, the information obtained from ion beam analysis will be compared with that derived from other techniques such as Energy Dispersive X-ray (EDX) and Auger spectroscopies. 4 refs., 5 figs.

  8. Ion beam analysis of metal ion implanted surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Evans, P J; Chu, J W; Johnson, E P; Noorman, J T [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia); Sood, D K [Royal Melbourne Inst. of Tech., VIC (Australia)

    1994-12-31

    Ion implantation is an established method for altering the surface properties of many materials. While a variety of analytical techniques are available for the characterisation of implanted surfaces, those based on particle accelerators such as Rutherford backscattering (RBS) and nuclear reaction analysis (NRA) provide some of the most useful and powerful for this purpose. Application of the latter techniques to metal ion implantation research at ANSTO will be described with particular reference to specific examples from recent studies. Where possible, the information obtained from ion beam analysis will be compared with that derived from other techniques such as Energy Dispersive X-ray (EDX) and Auger spectroscopies. 4 refs., 5 figs.

  9. Ion beam analysis of metal ion implanted surfaces

    International Nuclear Information System (INIS)

    Evans, P.J.; Chu, J.W.; Johnson, E.P.; Noorman, J.T.; Sood, D.K.

    1993-01-01

    Ion implantation is an established method for altering the surface properties of many materials. While a variety of analytical techniques are available for the characterisation of implanted surfaces, those based on particle accelerators such as Rutherford backscattering (RBS) and nuclear reaction analysis (NRA) provide some of the most useful and powerful for this purpose. Application of the latter techniques to metal ion implantation research at ANSTO will be described with particular reference to specific examples from recent studies. Where possible, the information obtained from ion beam analysis will be compared with that derived from other techniques such as Energy Dispersive X-ray (EDX) and Auger spectroscopies. 4 refs., 5 figs

  10. High current ion sources

    International Nuclear Information System (INIS)

    Brown, I.G.

    1989-06-01

    The concept of high current ion source is both relative and evolutionary. Within the domain of one particular kind of ion source technology a current of microamperers might be 'high', while in another area a current of 10 Amperes could 'low'. Even within the domain of a single ion source type, what is considered high current performance today is routinely eclipsed by better performance and higher current output within a short period of time. Within their fields of application, there is a large number of kinds of ion sources that can justifiably be called high current. Thus, as a very limited example only, PIGs, Freemen sources, ECR sources, duoplasmatrons, field emission sources, and a great many more all have their high current variants. High current ion beams of gaseous and metallic species can be generated in a number of different ways. Ion sources of the kind developed at various laboratories around the world for the production of intense neutral beams for controlled fusion experiments are used to form large area proton deuteron beams of may tens of Amperes, and this technology can be used for other applications also. There has been significant progress in recent years in the use of microwave ion sources for high current ion beam generation, and this method is likely to find wide application in various different field application. Finally, high current beams of metal ions can be produced using metal vapor vacuum arc ion source technology. After a brief consideration of high current ion source design concepts, these three particular methods are reviewed in this paper

  11. Ion sources development at GANIL for radioactive beams and high charge state ions

    International Nuclear Information System (INIS)

    Leroy, R.; Barue, C.; Canet, C.; Dupuis, M.; Flambard, J.L.; Gaubert, G.; Gibouin, S.; Huguet, Y.; Jardin, P.; Lecesne, N.; Leherissier, P.; Lemagnen, F.; Pacquet, J.Y.; Pellemoine-Landre, F.; Rataud, J.P.; Saint-Laurent, M.G.; Villari, A.C.C.; Maunoury, L.

    2001-01-01

    The GANIL laboratory has in charge the production of ion beams for nuclear and non nuclear physics. This article reviews the last developments that are underway in the fields of radioactive ion beam production, increase of the metallic ion intensities and production of highly charges ion beams. (authors)

  12. Salt stress induced ion accumulation, ion homeostasis, membrane ...

    African Journals Online (AJOL)

    Salt stress induced ion accumulation, ion homeostasis, membrane injury and sugar contents in salt-sensitive rice ( Oryza sativa L. spp. indica ) roots under isoosmotic conditions. ... The accumulation of sugars in PT1 roots may be a primary salt-defense mechanism and may function as an osmotic control. Key words: ...

  13. WAQI’U TA’LIIM AL-NATSRI AL-ARABY BI INDONESIA

    Directory of Open Access Journals (Sweden)

    Mohammad Ahsanuddin

    2016-07-01

    Full Text Available This research is to describe the teaching and learning of Arabic prose with regard to goals, themes, methods, media, and evaluation, as well as prose analysis examples made by both teacher and student. The research method used is descriptive-qualitative. The subjects are students at the Arabic Department who have taken Prose Analysis (Dirasah Natsriyyah course. The result of the research shows that prose is an expression what lies in human’s heart. The goals of the learning is to understand theories used to analyze prose, and to apply them in text analysis. The themes studied included the understanding of prose, acquintance with some theoretical approaches for analysis, such as structuralism, semiotics, etc. The methods of learning employed are lecture, text analysis, and assignment. The media of learning used is power point. The evaluation is undertaken throughout the process of learning, in addition to what the students had achieved in their exams.

  14. Penciptaan Teater Tubuh

    Directory of Open Access Journals (Sweden)

    Tony Supartono

    2017-03-01

    ABSTRAK   Proses penciptaan teater tubuh merupakan penawaran pembaharuan teater dengan menggarap dan mengolah tubuh, yang menjadi kunci utama produksi teater. Paper ini mengajukan rancangan untuk menawarkan pikiran-pikiran baru, pikiran-pikiran alternatif. Penciptaan teater tubuh adalah proses latihan tubuh dengan kesadaran tubuh sebagai gagasan atau tubuh itu sendiri sebagai ide, proses belajar pada tubuh sehingga mendapat kesadaran gerak-gerak yang dilahirkan oleh tubuh. Proses latihannya penulis memberi nama “interogasi tubuh aktor ”, yaitu proses membongkar dan mempertanyakan kembali persoalan tubuh aktor. Penciptaan teater tubuh menawarkan pandangan baru tentang tubuh yang bukan sekedar media ungkap tetapi tubuh itu sendiri mandiri sebagai sebuah identitas. Tubuh dipandang sebagai fenomena yang berdiri sendiri tetapi sekaligus melakukan relasi dengan lingkungan: jalan, bangunan, kendaraan, orang-orang dan bahkan seluruh masyarakat dan ideologinya yang sedang dominan. Dengan demikian penciptaan teater tubuh adalah proses teater yang utuh antara aktor   dan bahasatubuh sekaligus relasinya dengan masyarakat.   Kata kunci : teater, tubuh, interogasi tubuh, ruang publik.

  15. Development of a four-zone carousel process packed with metal ion-imprinted polymer for continuous separation of copper ions from manganese ions, cobalt ions, and the constituent metal ions of the buffer solution used as eluent.

    Science.gov (United States)

    Jo, Se-Hee; Park, Chanhun; Yi, Sung Chul; Kim, Dukjoon; Mun, Sungyong

    2011-08-19

    A three-zone carousel process, in which Cu(II)-imprinted polymer (Cu-MIP) and a buffer solution were employed as adsorbent and eluent respectively, has been developed previously for continuous separation of Cu²⁺ (product) from Mn²⁺ and Co²⁺ (impurities). Although this process was reported to be successful in the aforementioned separation task, the way of using a buffer solution as eluent made it inevitable that the product stream included the buffer-related metal ions (i.e., the constituent metal ions of the buffer solution) as well as copper ions. For a more perfect recovery of copper ions, it would be necessary to improve the previous carousel process such that it can remove the buffer-related metal ions from copper ions while maintaining the previous function of separating copper ions from the other 2 impure heavy-metal ions. This improvement was made in this study by proposing a four-zone carousel process based on the following strategy: (1) the addition of one more zone for performing the two-step re-equilibration tasks and (2) the use of water as the eluent of the washing step in the separation zone. The operating condition