75 FR 45145 - Notice of Submission of Proposed Information Collection to OMB Final Endorsement of Credit...

Science.gov (United States)

2010-08-02

... Proposed Information Collection to OMB Final Endorsement of Credit Instrument (HUD Programs) AGENCY: Office... proposal. Information collected is used to request final endorsement by HUD of the credit instrument. The...: Title of Proposal: Final Endorsement of Credit Instrument. OMB Approval Number: 2502-0016. Form Numbers...

75 FR 6682 - Notice of Proposed Information Collection: Comment Request; Final Endorsement of Credit Instrument

Science.gov (United States)

2010-02-10

... Information Collection: Comment Request; Final Endorsement of Credit Instrument AGENCY: Office of the.... This Notice also lists the following information: Title of Proposal: Final Endorsement of Credit... proposed use: The information collected on the ``Final Endorsement of Credit Instrument'' form is used to...

ANSI/ASHRAE/IESNA Standard 90.1-2007 Final Qualitative Determination

Energy Technology Data Exchange (ETDEWEB)

Halverson, Mark A.; Liu, Bing; Richman, Eric E.; Winiarski, David W.

2011-01-01

A final qualitative analysis of all addenda to American National Standards Institute (ANSI)/American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)/Illuminating Engineering Society of North America (IESNA) Standard 90.1-2004 that were included in ANSI/ASHRAE/IESNA Standard 90.1-2007 was conducted. All 44 addenda processed by ASHRAE in the creation of Standard 90.1-2007 from Standard 90.1-2004 were evaluated by the U.S. Department of Energy (DOE) for their impact on energy efficiency. DOE preliminarily determined whether that addenda would have a positive, neutral, or negative impact on overall building efficiency. Table S.1 shows the number of positive and negative changes for each section of Standard 90.1.

Black Lung Benefits Act: standards for chest radiographs. Final rule.

Science.gov (United States)

2014-04-17

Physicians and adjudicators use chest radiographs (X-rays) as a tool in evaluating whether a coal miner suffers from pneumoconiosis (black lung disease). Accordingly, the Department's regulations implementing the Black Lung Benefits Act allow the submission of radiographs in connection with benefit claims and set out quality standards for administering and interpreting film-based chest radiographs. This final rule updates the Department's existing film-radiograph standards and provides parallel standards for digital radiographs. This rule also updates outdated terminology and removes certain obsolete provisions.

76 FR 75556 - Notice of Availability of the Proposed Resource Management Plan and Final Environmental Impact...

Science.gov (United States)

2011-12-02

...] Notice of Availability of the Proposed Resource Management Plan and Final Environmental Impact Statement for the Taos Field Office, New Mexico AGENCY: Bureau of Land Management, Interior. ACTION: Notice of...) has prepared the Proposed Resource Management Plan/Final Environmental Impact Statement (Proposed RMP...

78 FR 65932 - Updating OSHA Standards Based on National Consensus Standards; Signage

Science.gov (United States)

2013-11-04

...; Signage AGENCY: Occupational Safety and Health Administration (OSHA), Department of Labor. ACTION... accompanied its direct final rule revising its signage standards for general industry and construction. DATES... proposed rule (NPRM) along with the direct final rule (DFR) (see 78 FR 35585) updating its signage...

A proposed standard round compact specimen for plane strain fracture toughness testing

Science.gov (United States)

Underwood, J. H.; Newman, J. C., Jr.; Seeley, R. R.

1980-01-01

A round, disk-shaped specimen is proposed as a standard test specimen for addition to ASTM Test for Plane-Strain Fracture Toughness of Metallic Materials (E 399-78A). The specimen is diametrically cracked, and loaded in the same way as the existing standard compact specimen. Tests and analyses were performed to verify that the proposed round compact specimen and associated stress intensity factor K solution are appropriate for a standard plane strain fracture toughness test. The use of the round compact specimen for other fracture tests is described.

The proposed combustion standards and DOE thermal treatment systems

International Nuclear Information System (INIS)

McFee, J.; Hinman, M.B.; Eaton, D.; NcNeel, K.

1997-01-01

Under the provisions of the Clean Air Act (CAA) concerning emission of hazardous air pollutants (HAPs), the Environmental Protection Agency (EPA) published the proposed Revised Standards for Hazardous Waste Combustors on April 19, 1996 (EPA, 1996). These standards would apply to the existing Department of Energy (DOE) radioactive and mixed waste incinerators, and may be applied to several developing alternatives to incineration. The DOE has reviewed the basis for these regulations and prepared extensive comments to present concerns about the bases and implications of the standards. DOE is now discussing compliance options with the EPA for regulation of radioactive and mixed waste thermal treatment systems

nanoSTAIR: a new strategic proposal to impulse standardization in nanotechnology research

Science.gov (United States)

López de Ipiña, J. M.; Salvi, O.; Hazebrouck, B.; Jovanovic, A.; Carre, F.; Saamanen, A.; Brouwer, D.; Schmitt, M.; Martin, S.

2015-05-01

Nanotechnology is considered one of the key technologies of the 21st century within Europe and a Key-Enabling Technology (KET) by Horizon 2020. Standardization has been identified in H2020 as one of the innovation-support measures by bridging the gap between research and the market, and helping the fast and easy transfer of research results to the European and international market. The development of new and improved standards requires high quality technical information, creating a fundamental interdependency between the standardization and research communities. In the frame of project nanoSTAIR (GA 319092), the present paper describes the European scenario on research and standardization in nanotechnology and presents a proposal of a European strategy (nanoSTAIR) to impulse direct “pipelines” between research and standardization. In addition, strategic actions focused on integration of standardization in the R&D projects, from the early stages of the design of a future business (Project Proposal), are also described.

nanoSTAIR: a new strategic proposal to impulse standardization in nanotechnology research

International Nuclear Information System (INIS)

De Ipiña, J M López; Salvi, O; Hazebrouck, B; Jovanovic, A; Carre, F; Saamanen, A; Brouwer, D; Schmitt, M; Martin, S

2015-01-01

Nanotechnology is considered one of the key technologies of the 21 st century within Europe and a Key-Enabling Technology (KET) by Horizon 2020. Standardization has been identified in H2020 as one of the innovation-support measures by bridging the gap between research and the market, and helping the fast and easy transfer of research results to the European and international market. The development of new and improved standards requires high quality technical information, creating a fundamental interdependency between the standardization and research communities. In the frame of project nanoSTAIR (GA 319092), the present paper describes the European scenario on research and standardization in nanotechnology and presents a proposal of a European strategy (nanoSTAIR) to impulse direct “pipelines” between research and standardization. In addition, strategic actions focused on integration of standardization in the R and D projects, from the early stages of the design of a future business (Project Proposal), are also described. (paper)

78 FR 58500 - Water Quality Standards Regulatory Clarifications Proposed Rule; Public Meeting and Public Webinars

Science.gov (United States)

2013-09-24

... the proposed rule ``Water Quality Standards Regulatory Clarifications,'' which was published... the federal water quality standards (WQS) regulation at 40 CFR Part 131 which helps implement the..., the proposed rule will lead to improved water quality standard development, implementation and...

78 FR 21617 - Notice of Proposed Information Collection: Comment Request; Final Endorsement of Credit Instrument

Science.gov (United States)

2013-04-11

... Information Collection: Comment Request; Final Endorsement of Credit Instrument AGENCY: Office of the... Proposal: Final Endorsement of Credit Instrument. OMB Control Number, if applicable: 2502-0016. Description... Endorsement of Credit Instrument'' form is used to request to request final endorsement by HUD of the credit...

Comparative Analysis of Three Proposed Federal Renewable Electricity Standards

Energy Technology Data Exchange (ETDEWEB)

Sullivan, P.; Logan, J.; Bird, L.; Short, W.

2009-05-01

This paper analyzes potential impacts of proposed national renewable electricity standard (RES) legislation. An RES is a mandate requiring certain electricity retailers to provide a minimum share of their electricity sales from qualifying renewable power generation. The analysis focuses on draft bills introduced individually by Senator Jeff Bingaman and Representative Edward Markey, and jointly by Representative Henry Waxman and Markey. The analysis uses NREL's Regional Energy Deployment System (ReEDS) model to evaluate the impacts of the proposed RES requirements on the U.S. energy sector in four scenarios.

Recommendations for a proposed standard for performing systems analysis

International Nuclear Information System (INIS)

LaChance, J.; Whitehead, D.; Drouin, M.

1998-01-01

In August 1995, the Nuclear Regulatory Commission (NRC) issued a policy statement proposing improved regulatory decisionmaking by increasing the use of PRA [probabilistic risk assessment] in all regulatory matters to the extent supported by the state-of-the-art in PRA methods and data. A key aspect in using PRA in risk-informed regulatory activities is establishing the appropriate scope and attributes of the PRA. In this regard, ASME decided to develop a consensus PRA Standard. The objective is to develop a PRA Standard such that the technical quality of nuclear plant PRAs will be sufficient to support risk-informed regulatory applications. This paper presents examples recommendations for the systems analysis element of a PRA for incorporation into the ASME PRA Standard

Proposal of a micromagnetic standard problem for ferromagnetic resonance simulations

Energy Technology Data Exchange (ETDEWEB)

Baker, Alexander [Department of Physics, Clarendon Laboratory, University of Oxford, Oxford, 3PU, OX1 (United Kingdom); Beg, Marijan; Ashton, Gregory; Albert, Maximilian; Chernyshenko, Dmitri [Faculty of Engineering and the Environment, University of Southampton, SO17 1BJ, Southampton (United Kingdom); Wang, Weiwei [Department of Physics, Ningbo University, Ningbo, 315211 China (China); Zhang, Shilei [Department of Physics, Clarendon Laboratory, University of Oxford, Oxford, 3PU, OX1 (United Kingdom); Bisotti, Marc-Antonio; Franchin, Matteo [Faculty of Engineering and the Environment, University of Southampton, SO17 1BJ, Southampton (United Kingdom); Hu, Chun Lian; Stamps, Robert [SUPA School of Physics and Astronomy, University of Glasgow, G12, Glasgow, 8QQ United Kingdom (United Kingdom); Hesjedal, Thorsten, E-mail: t.hesjedal1@physics.ox.ac.uk [Department of Physics, Clarendon Laboratory, University of Oxford, Oxford, 3PU, OX1 (United Kingdom); Fangohr, Hans [Faculty of Engineering and the Environment, University of Southampton, SO17 1BJ, Southampton (United Kingdom)

2017-01-01

Nowadays, micromagnetic simulations are a common tool for studying a wide range of different magnetic phenomena, including the ferromagnetic resonance. A technique for evaluating reliability and validity of different micromagnetic simulation tools is the simulation of proposed standard problems. We propose a new standard problem by providing a detailed specification and analysis of a sufficiently simple problem. By analyzing the magnetization dynamics in a thin permalloy square sample, triggered by a well defined excitation, we obtain the ferromagnetic resonance spectrum and identify the resonance modes via Fourier transform. Simulations are performed using both finite difference and finite element numerical methods, with OOMMF and Nmag simulators, respectively. We report the effects of initial conditions and simulation parameters on the character of the observed resonance modes for this standard problem. We provide detailed instructions and code to assist in using the results for evaluation of new simulator tools, and to help with numerical calculation of ferromagnetic resonance spectra and modes in general. - Highlights: ●Micromagnetic standard problem for FerroMagnetic Resonance (FMR). ●Overview of FMR simulation techniques. ●Define reproducible test problem with ring down method. ●Example configuration files, scripts and post processing for OOMMF and NMag. ●Code and data available in Ref. [23].

A proposal for standardizing computed tomography reports on abdominal aortic aneurysms

International Nuclear Information System (INIS)

Torlai, Fabiola Goda; Meirelles, Gustavo S. Portes; Miranda Junior, Fausto; Fonseca, Jose Honorio A.P. da; Ajzen, Sergio; D'Ippolito, Giuseppe

2006-01-01

Objective: to propose a model to standardize computed tomography reports on abdominal aortic aneurysms. Materials and methods: interviews were carried out with members of the Vascular Surgery Division of our institution, in the period between April and October 2004, aiming at developing a standardized model of computed tomography reports on abdominal aortic aneurysms. Based on this model, a questionnaire was elaborated and sent to other nine surgeons, all of them experienced in the field of abdominal aortic surgery. The questionnaires response rate was 55.5% (5/9). Results: the most frequently mentioned parameters of interest for evaluation of abdominal aortic aneurysms were: maximum diameter of proximal aortic neck, proximal aortic neck length to lower renal arteries, shape of proximal aortic neck, maximum diameter of the aneurysm and diameter of the common iliac arteries. These data allowed the development of a proposal for a model to standardize computed tomography reports. Conclusion: a model for standardized tomographic analysis of abdominal aortic aneurysms has met vascular surgeons' needs for following-up patients and planning their treatment. (author)

75 FR 16748 - Final Voluntary Product Standard; DOC PS 20-10 “American Softwood Lumber Standard”

Science.gov (United States)

2010-04-02

...-0146-02] Final Voluntary Product Standard; DOC PS 20-10 ``American Softwood Lumber Standard'' AGENCY... of Standards and Technology (NIST) announces voluntary product standard DOC PS 20-10 ``American Softwood Lumber Standard'' which will supersede DOC PS 20-05. The Standard establishes standard sizes and...

EPA's proposed Worker Protection Standard and the burdens of the past.

Science.gov (United States)

Bohme, Susanna Rankin

2015-01-01

An Environmental Protection Agency (EPA) recommendation for extensive changes to the Agency's 40-year-old Worker Protection Standard is currently stalled in the "proposed rule" stage. The proposal, which was available for public comment until 18 August, would improve safety, training, and hazard communication policies for agricultural pesticides. Exposure to hazards, including high heat, heavy machinery, stoop labor, and pesticides, makes occupational illness uncommonly common among the USA's estimated 2.5 million farm workers. To consider the proposed revisions' likelihood of addressing historical gaps in farmworker protection. The proposal was compared to the existing Worker Protection Standard, and key aspects were analyzed in relation to existing science on farm labor hazards, as well as historic occupational health, labor and immigration policy. US law historically has left farm workers largely unprotected. These exclusions and delays have been tolerated in part thanks to the myth of the independent family farmer, but more significant is the stingy nativism that presumes to benefit from immigrant labor without assuming any responsibility to protect the humans who provide it. In the first half of the 1970s, workers lobbied for robust protections, but rule making was impeded by lack of data and by the disproportionate influence of agricultural employers who sought minimal regulation. In 1974, the EPA passed the first Worker Protection Standard for farm workers. Key aspects of the proposed revision include stronger protections against drift and re-entry exposures, better information provision and training, and increased protections for workers under 16 years. The proposed changes represent an improvement over existing legislation, but do not go far enough. The revision should be strengthened along lines suggested by farm workers themselves, and other labor laws must also be amended to give the men, women, and children who work in the fields of this country full

Proposals for new standardized general diagnostic criteria for the secondary headaches

DEFF Research Database (Denmark)

Olesen, J; Steiner, T; Bousser, M-G

2009-01-01

headache and chronic migraine. These changes made apparent a further need for broader revisions to the standard formulation of diagnostic criteria for the secondary headaches. Currently, the fourth criterion makes impossible the definitive diagnosis of a secondary headache until the underlying cause has...... propose maintaining a standard approach to the secondary headaches using a set of four criteria A, B, C and D, but we construct these so that the requirement for resolution or successful treatment is removed. The proposal for general diagnostic criteria for the secondary headaches will be entered...... classification are then foreseen for the next 10 years. Until the printing of ICHD-IIR, the printed ICHD-II criteria remain in place for all other purposes. We issue a plea to the headache community to use and study these proposed general criteria for the secondary headaches in order to provide more evidence...

Kodak's Photo CD and Proposed Photo YCC Color Standard.

Science.gov (United States)

Urrows, Henry; Urrows, Elizabeth

1991-01-01

Describes new technology being developed by Eastman Kodak for storing 35mm color photos on compact disk (CD) and discusses its applications for desktop publishing. Benefits of photo CD and costs are examined, a proposed universal color standard that is an improved way to represent color digitally is explained, and software is discussed. (LRW)

GASB proposes new standards for financial reporting of postemployment benefits by state and local governments.

Science.gov (United States)

Johnson, Karl D

2003-03-01

GASB has proposed new standards that will affect the way in which governments report postemployment health care benefits in audited external financial statements, resulting in more complete and transparent reporting by employers and plans and more relevant and useful information for the users of governmental financial reports. This article provides an overview of current financial reporting standards and practice, the financial reporting objectives of the project, the proposed measurement approach, noteworthy specific proposals, and the projected timetable for completion of the project and implementation of the new standards.

US Department of Energy response to standards for remedial actions at inactive uranium processing sites: Proposed rule

International Nuclear Information System (INIS)

1988-01-01

The Title I groundwater standards for inactive uranium mill tailings sites, which were promulgated on January 5, 1983, by the US Environmental Protection Agency (EPA) for the Uranium Mill Tailings Remedial Action (UMTRA) Project, were remanded to the EPA on September 3, 1985, by the US Tenth Circuit Court of Appeals. The Court instructed the EPA to compile general groundwater standards for all Title I sites. On September 24, 1987, the EPA published proposed standards (52FR36000-36008) in response to the remand. This report includes an evaluation of the potential effects of the proposed EPA groundwater standards on the UMTRA Project, as well as a discussion of the DOE's position on the proposed standards. The report also contains and appendix which provides supporting information and cost analyses. In order to assess the impacts of the proposed EPA standards, this report summarizes the proposed EPA standards in Section 2.0. The next three sections assess the impacts of the three parts of the EPA standards: Subpart A considers disposal sites; Subpart B is concerned with restoration at processing sites; and Subpart C addresses supplemental standards. Section 6.0 integrates previous sections into a recommendations section. Section 7.0 contains the DOE response to questions posed by the EPA in the preamble to the proposed standards. 6 refs., 5 figs., 3 tabs

Proposed Standards for Variable Harmonization Documentation and Referencing: A Case Study Using QuickCharmStats 1.1

Science.gov (United States)

Winters, Kristi; Netscher, Sebastian

2016-01-01

Comparative statistical analyses often require data harmonization, yet the social sciences do not have clear operationalization frameworks that guide and homogenize variable coding decisions across disciplines. When faced with a need to harmonize variables researchers often look for guidance from various international studies that employ output harmonization, such as the Comparative Survey of Election Studies, which offer recoding structures for the same variable (e.g. marital status). More problematically there are no agreed documentation standards or journal requirements for reporting variable harmonization to facilitate a transparent replication process. We propose a conceptual and data-driven digital solution that creates harmonization documentation standards for publication and scholarly citation: QuickCharmStats 1.1. It is free and open-source software that allows for the organizing, documenting and publishing of data harmonization projects. QuickCharmStats starts at the conceptual level and its workflow ends with a variable recording syntax. It is therefore flexible enough to reflect a variety of theoretical justifications for variable harmonization. Using the socio-demographic variable ‘marital status’, we demonstrate how the CharmStats workflow collates metadata while being guided by the scientific standards of transparency and replication. It encourages researchers to publish their harmonization work by providing researchers who complete the peer review process a permanent identifier. Those who contribute original data harmonization work to their discipline can now be credited through citations. Finally, we propose peer-review standards for harmonization documentation, describe a route to online publishing, and provide a referencing format to cite harmonization projects. Although CharmStats products are designed for social scientists our adherence to the scientific method ensures our products can be used by researchers across the sciences. PMID

Proposal and Evaluation of Subordinate Standard Solar Irradiance Spectra: Preprint

Energy Technology Data Exchange (ETDEWEB)

Habte, Aron M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Wilbert, Stefan [German Aerospace Center (DLR); Jessen, Wilko [German Aerospace Center (DLR); Gueymard, Chris [Solar Consulting Services; Polo, Jesus [CIEMAT; Bian, Zeqiang [China Meteorological Administration; Driesse, Anton [Photovoltaic Performance Labs; Marzo, Aitor [University of Antofagasta; Armstrong, Peter [Masdar Institute of Science & Technology; Vignola, Frank [University of Oregon; Ramirez, Lourdes [CIEMAT

2018-04-12

This paper introduces a concept for global tilted irradiance (GTI) subordinate standard spectra to supplement the current standard spectra used in solar photovoltaic applications as defined in ASTM G173 and IEC60904. The proposed subordinate standard spectra correspond to atmospheric conditions and tilt angles that depart significantly from the main standard spectrum, and they can be used to more accurately represent various local conditions. For the definition of subordinate standard spectra cases with an elevation 1.5 km above sea level, the question arises whether the air mass should be calculated including a pressure correction or not. This study focuses on the impact of air mass used in standard spectra, and it uses data from 29 locations to examine which air mass is most appropriate for GTI and direct normal irradiance (DNI) spectra. Overall, it is found that the pressure-corrected air mass of 1.5 is most appropriate for DNI spectra. For GTI, a non-pressure-corrected air mass of 1.5 was found to be more appropriate.

76 FR 13429 - Notice of Availability of Final Environmental Impact Statement for the Proposed Blackfoot Bridge...

Science.gov (United States)

2011-03-11

...] Notice of Availability of Final Environmental Impact Statement for the Proposed Blackfoot Bridge Mine... Blackfoot Bridge Mine. DATES: The Final EIS is now available for public review. The BLM Record of Decision... of Availability of the Final EIS in the Federal Register. ADDRESSES: Copies of the Blackfoot Bridge...

ASEAN-USAID buildings energy conservation project. Volume 1, Energy standards: Final report

Energy Technology Data Exchange (ETDEWEB)

Levine, M.D.; Busch, J.F. [eds.][Lawrence Berkeley Lab., CA (United States); Deringer, J.J. [Deringer Group, Riva, MD (United States)

1992-06-01

Mandatory or voluntary energy-efficiency standards for new or existing buildings can play an important role in a national program aimed at promoting energy conservation. Building codes and standards can provide a degree of control over design and building practices throughout the construction process, and encourage awareness of energy-conscious design. Studies in developed countries indicate that efficiency standards can produce energy reductions on the order of 20 to 40% or more. Within ASEAN, analyses of the savings potential from the proposed standards suggest that if implemented, these standards would produce savings over current new design practice of 19% to 24%. In this volume we provide an overview of the ASEAN-USAID project aimed at promulgating standards for energy efficiency in commercial buildings. The process of developing and implementing energy-efficiency standards for buildings can be subdivided into two key components: policy development; and technical and economic analysis. Each of these involves a number of steps and processes, as outlined in Figure 1-1. This volume describes the technical and economic analyses used to develop the proposed energy efficiency standards for four countries (Malaysia, Thailand, the Philippines, and Indonesia), and to refine an energy standard existing in Singapore since 1979. Though oriented toward the ASEAN region, the analysis methods described here are applicable in a range of settings, provided appropriate modifications are made for local building construction, climatic, economic, and political conditions. Implementation issues are not specifically addressed here; rather this volume is oriented towards the analytical work needed to establish or revise an energy standard for buildings.

Impact of proposed research reactor standards on reactor operation

Energy Technology Data Exchange (ETDEWEB)

Ringle, J C; Johnson, A G; Anderson, T V [Oregon State University (United States)

1974-07-01

A Standards Committee on Operation of Research Reactors, (ANS-15), sponsored by the American Nuclear Society, was organized in June 1971. Its purpose is to develop, prepare, and maintain standards for the design, construction, operation, maintenance, and decommissioning of nuclear reactors intended for research and training. Of the 15 original members, six were directly associated with operating TRIGA facilities. This committee developed a standard for the Development of Technical Specifications for Research Reactors (ANS-15.1), the revised draft of which was submitted to ANSI for review in May of 1973. The Committee then identified 10 other critical areas for standards development. Nine of these, along with ANS-15.1, are of direct interest to TRIGA owners and operators. The Committee was divided into subcommittees to work on these areas. These nine areas involve proposed standards for research reactors concerning: 1. Records and Reports (ANS-15.3) 2. Selection and Training of Personnel (ANS-15.4) 3. Effluent Monitoring (ANS-15.5) 4. Review of Experiments (ANS-15.6) 5. Siting (ANS-15.7) 6. Quality Assurance Program Guidance and Requirements (ANS-15.8) 7. Restrictions on Radioactive Effluents (ANS-15.9) 8. Decommissioning (ANS-15.10) 9. Radiological Control and Safety (ANS-15.11). The present status of each of these standards will be presented, along with their potential impact on TRIGA reactor operation. (author)

Impact of proposed research reactor standards on reactor operation

International Nuclear Information System (INIS)

Ringle, J.C.; Johnson, A.G.; Anderson, T.V.

1974-01-01

A Standards Committee on Operation of Research Reactors, (ANS-15), sponsored by the American Nuclear Society, was organized in June 1971. Its purpose is to develop, prepare, and maintain standards for the design, construction, operation, maintenance, and decommissioning of nuclear reactors intended for research and training. Of the 15 original members, six were directly associated with operating TRIGA facilities. This committee developed a standard for the Development of Technical Specifications for Research Reactors (ANS-15.1), the revised draft of which was submitted to ANSI for review in May of 1973. The Committee then identified 10 other critical areas for standards development. Nine of these, along with ANS-15.1, are of direct interest to TRIGA owners and operators. The Committee was divided into subcommittees to work on these areas. These nine areas involve proposed standards for research reactors concerning: 1. Records and Reports (ANS-15.3) 2. Selection and Training of Personnel (ANS-15.4) 3. Effluent Monitoring (ANS-15.5) 4. Review of Experiments (ANS-15.6) 5. Siting (ANS-15.7) 6. Quality Assurance Program Guidance and Requirements (ANS-15.8) 7. Restrictions on Radioactive Effluents (ANS-15.9) 8. Decommissioning (ANS-15.10) 9. Radiological Control and Safety (ANS-15.11). The present status of each of these standards will be presented, along with their potential impact on TRIGA reactor operation. (author)

Proposed standard-weight (Ws) equation and length-categorization standards for brown trout (Salmo trutta) in lentic habitats

Science.gov (United States)

Hyatt, M.W.; Hubert, W.A.

2001-01-01

We developed a standard-weight (Ws) equation for brown trout (Salmo trutta) in lentic habitats by applying the regression-line-percentile technique to samples from 49 populations in North America. The proposed Ws equation is log10 Ws = -5.422 + 3.194 log10 TL, when Ws is in grams and TL is total length in millimeters. The English-unit equivalent is log10 Ws = -3.592 + 3.194 log10 TL, when Ws is in pounds and TL is total length in inches. The equation is applicable for fish of 140-750 mm TL. Proposed length-category standards to evaluate fish within populations are: stock, 200 mm (8 in); quality, 300 mm (12 in); preferred, 400 mm (16 in); memorable, 500 mm (20 in); and trophy, 600 mm (24 in).

78 FR 41339 - Electric Reliability Organization Proposal To Retire Requirements in Reliability Standards

Science.gov (United States)

2013-07-10

...] Electric Reliability Organization Proposal To Retire Requirements in Reliability Standards AGENCY: Federal... Reliability Standards identified by the North American Electric Reliability Corporation (NERC), the Commission-certified Electric Reliability Organization. FOR FURTHER INFORMATION CONTACT: Kevin Ryan (Legal Information...

A Comparative Analysis of Three Proposed Federal Renewable Electricity Standards

Energy Technology Data Exchange (ETDEWEB)

Sullivan, Patrick [National Renewable Energy Lab. (NREL), Golden, CO (United States); Logan, Jeffrey [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bird, Lori [National Renewable Energy Lab. (NREL), Golden, CO (United States); Short, Walter [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2009-05-01

This paper analyzes potential impacts of proposed national renewable electricity standard (RES) legislation. An RES is a mandate requiring certain electricity retailers to provide a minimum share of their electricity sales from qualifying renewable power generation. The analysis focuses on draft bills introduced individually by Senator Jeff Bingaman and Representative Edward Markey, and jointly by Representative Henry Waxman and Markey. The analysis uses NREL's Regional Energy Deployment System (ReEDS) model to evaluate the impacts of the proposed RES requirements on the U.S. energy sector in four scenarios.

Medicaid program; health care-related taxes. Final rule.

Science.gov (United States)

2009-06-30

This rule finalizes our proposal to delay enforcement of certain clarifications regarding standards for determining hold harmless arrangements in the final rule entitled, "Medicaid Program; Health Care-Related Taxes" from the expiration of a Congressional moratorium on enforcement from July 1, 2009 to June 30, 2010.

Search for the standard model Higgs boson in tau final states

NARCIS (Netherlands)

Abazov, V.M.; et al., [Unknown; Ancu, L.S.; de Jong, S.J.; Filthaut, F.; Galea, C.F.; Hegeman, J.G.; Houben, P.; Meijer, M.M.; Svoisky, P.; van den Berg, P.J.; van Leeuwen, W.M.

2009-01-01

We present a search for the standard model Higgs boson using hadronically decaying tau leptons, in 1 fb(-1) of data collected with the D0 detector at the Fermilab Tevatron p(p)over-bar collider. We select two final states: tau(+/-) plus missing transverse energy and b jets, and tau(+)tau(-) plus

78 FR 43224 - Notice of Availability of the Final Environmental Impact Statement for the Proposed Sun Valley to...

Science.gov (United States)

2013-07-19

....XXX; AZA35079] Notice of Availability of the Final Environmental Impact Statement for the Proposed Sun... Land Management (BLM) has prepared a Final Environmental Impact Statement (EIS) for the proposed Sun..., operate, and maintain a 500/230-kV overhead transmission line from the Sun Valley Substation to the Morgan...

76 FR 39105 - Notice of Request for Comments on Proposed Deferred Maintenance and Repairs Standards

Science.gov (United States)

2011-07-05

... FEDERAL ACCOUNTING STANDARDS ADVISORY BOARD Notice of Request for Comments on Proposed Deferred Maintenance and Repairs Standards AGENCY: Federal Accounting Standards Advisory Board. ACTION: Notice. Board... Accounting Standards Advisory Board (FASAB) is requesting comments on the Exposure Draft, Deferred...

77 FR 10775 - United States v. SG Interests I LTD., et al.; Proposed Final Judgment and Competitive Impact...

Science.gov (United States)

2012-02-23

... a related qui tam case also filed in United States District Court for the District of Colorado... PROPOSED FINAL JUDGMENT The proposed Final Judgment relates to a qui tam action captioned United States ex... this action and the qui tam action arise from common facts related to BLM auctions in February 2005 and...

Proposed minimum reporting standards for chemical analysis Chemical Analysis Working Group (CAWG) Metabolomics Standards Initiative (MSI)

Science.gov (United States)

Amberg, Alexander; Barrett, Dave; Beale, Michael H.; Beger, Richard; Daykin, Clare A.; Fan, Teresa W.-M.; Fiehn, Oliver; Goodacre, Royston; Griffin, Julian L.; Hankemeier, Thomas; Hardy, Nigel; Harnly, James; Higashi, Richard; Kopka, Joachim; Lane, Andrew N.; Lindon, John C.; Marriott, Philip; Nicholls, Andrew W.; Reily, Michael D.; Thaden, John J.; Viant, Mark R.

2013-01-01

There is a general consensus that supports the need for standardized reporting of metadata or information describing large-scale metabolomics and other functional genomics data sets. Reporting of standard metadata provides a biological and empirical context for the data, facilitates experimental replication, and enables the re-interrogation and comparison of data by others. Accordingly, the Metabolomics Standards Initiative is building a general consensus concerning the minimum reporting standards for metabolomics experiments of which the Chemical Analysis Working Group (CAWG) is a member of this community effort. This article proposes the minimum reporting standards related to the chemical analysis aspects of metabolomics experiments including: sample preparation, experimental analysis, quality control, metabolite identification, and data pre-processing. These minimum standards currently focus mostly upon mass spectrometry and nuclear magnetic resonance spectroscopy due to the popularity of these techniques in metabolomics. However, additional input concerning other techniques is welcomed and can be provided via the CAWG on-line discussion forum at http://msi-workgroups.sourceforge.net/ or http://Msi-workgroups-feedback@lists.sourceforge.net. Further, community input related to this document can also be provided via this electronic forum. PMID:24039616

Proposed Oral Reference Dose (RfD) for Barium and Compounds (Final Report, 2004)

Science.gov (United States)

This document is the final report from the 2004 external peer review of the Proposed Oral Reference Dose (RfD) for Barium and Compounds, prepared by the U.S. Environmental Protection Agency (EPA), National Center for Environmental Assessment (NCEA), for the Integrated Risk...

75 FR 78198 - Proposed Final Policy on Consultation and Coordination With Indian Tribes

Science.gov (United States)

2010-12-15

... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Chapter I [EPA-HQ-OA-2010-0992 FRL-9239-4] Proposed Final Policy on Consultation and Coordination With Indian Tribes AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of document for public comment. SUMMARY: The Environmental Protection Agency (EPA) is...

75 FR 3509 - Public Company Accounting Oversight Board; Order Approving Proposed Rules on Auditing Standard No...

Science.gov (United States)

2010-01-21

... Accounting Oversight Board; Order Approving Proposed Rules on Auditing Standard No. 7, Engagement Quality... (the ``Commission'') a notice (the ``Notice'') of proposed rules (File No. PCAOB-2009-02) on Auditing... identify any significant engagement deficiencies before it issues its audit report. Auditing Standard No. 7...

Final height in survivors of childhood cancer compared with Height Standard Deviation Scores at diagnosis

NARCIS (Netherlands)

Knijnenburg, S. L.; Raemaekers, S.; van den Berg, H.; van Dijk, I. W. E. M.; Lieverst, J. A.; van der Pal, H. J.; Jaspers, M. W. M.; Caron, H. N.; Kremer, L. C.; van Santen, H. M.

2013-01-01

Our study aimed to evaluate final height in a cohort of Dutch childhood cancer survivors (CCS) and assess possible determinants of final height, including height at diagnosis. We calculated standard deviation scores (SDS) for height at initial cancer diagnosis and height in adulthood in a cohort of

Air kerma standardization for diagnostic radiology, and requirements proposal for calibration laboratories; Padronizacao da grandeza Kerma no ar para radiodiagnostico e proposta de requisitos para laboratorios de calibracao

Energy Technology Data Exchange (ETDEWEB)

Ramos, Manoel Mattos Oliveira

2009-07-01

The demand for calibration services and quality control in diagnostic radiology has grown in the country since the publication of the governmental regulation 453, issued by the Ministry of Health in 1998. At that time, to produce results facing the new legislation, many laboratories used different standards and radiation qualities, some of which could be inadequate. The international standards neither supplied consistent radiation qualities and standardization for the different types of equipment available. This situation changed with the publication of the new edition of the IEC 61267 standard, published in 2005. A metrology network was created, but it is not yet accredited by the accreditation organism of the country, INMETRO. The objective of this work was to implement the standardization of the air kerma for the un attenuated qualities (RQR) of IEC 61267, and to develop a requirement proposal for instruments calibration laboratories. Results of interlaboratory comparisons demonstrate that the quantity is standardized and internationally traceable. A laboratory requirement proposal was finalized and it shall be submitted to INMETRO to be used as auxiliary normative document in laboratory accreditation. (author)

Evaluation of health risks associated with proposed ground water standards at selected inactive uranium mill-tailings sites

International Nuclear Information System (INIS)

Hamilton, L.D.; Medeiros, W.H.; Meinhold, A.; Morris, S.C.; Moskowitz, P.D.; Nagy, J.; Lackey, K.

1989-04-01

The US Environmental Protection Agency (EPA) has proposed ground water standards applicable to all inactive uranium mill-tailings sites. The proposed standards include maximum concentration limits (MCL) for currently regulated drinking water contaminants, as well as the addition of standards for molybdenum, uranium, nitrate, and radium-226 plus radium-228. The proposed standards define the point of compliance to be everywhere downgradient of the tailings pile, and require ground water remediation to drinking water standards if MCLs are exceeded. This document presents a preliminary description of the Phase 2 efforts. The potential risks and hazards at Gunnison, Colorado and Lakeview, Oregon were estimated to demonstrate the need for a risk assessment and the usefulness of a cost-benefit approach in setting supplemental standards and determining the need for and level of restoration at UMTRA sites. 8 refs., 12 tabs

Evaluation of health risks associated with proposed ground water standards at selected inactive uranium mill-tailings sites

Energy Technology Data Exchange (ETDEWEB)

Hamilton, L.D.; Medeiros, W.H.; Meinhold, A.; Morris, S.C.; Moskowitz, P.D.; Nagy, J.; Lackey, K.

1989-04-01

The US Environmental Protection Agency (EPA) has proposed ground water standards applicable to all inactive uranium mill-tailings sites. The proposed standards include maximum concentration limits (MCL) for currently regulated drinking water contaminants, as well as the addition of standards for molybdenum, uranium, nitrate, and radium-226 plus radium-228. The proposed standards define the point of compliance to be everywhere downgradient of the tailings pile, and require ground water remediation to drinking water standards if MCLs are exceeded. This document presents a preliminary description of the Phase 2 efforts. The potential risks and hazards at Gunnison, Colorado and Lakeview, Oregon were estimated to demonstrate the need for a risk assessment and the usefulness of a cost-benefit approach in setting supplemental standards and determining the need for and level of restoration at UMTRA sites. 8 refs., 12 tabs.

75 FR 1359 - Notice of Availability of Final Environmental Impact Statement for the Proposed Construction of...

Science.gov (United States)

2010-01-11

... Environmental Impact Statement for the Proposed Construction of the Western Wake Regional Wastewater Management... Environmental Impact Statement for the proposed construction of the Western Wake Regional Wastewater Management... initial Web version of the Final Environmental Impact Statement had problems with the Web links. The web...

78 FR 54909 - Notice of Availability of the Proposed Winnemucca District Resource Management Plan and Final...

Science.gov (United States)

2013-09-06

... Rock Desert-High Rock Canyon Emigrant Trails National Conservation Area and Associated Wilderness, and... plant species is proposed for the existing Osgood Mountain Milkvetch ACEC. The Proposed RMP/Final EIS... preservation and protection of ecosystems and contains two options: Option 1 allows livestock grazing and...

75 FR 4451 - Financial Management Service; Proposed Collection of Information: Final Rule-Management of...

Science.gov (United States)

2010-01-27

... DEPARTMENT OF THE TREASURY Fiscal Service Financial Management Service; Proposed Collection of Information: Final Rule--Management of Federal Agency Disbursements. AGENCY: Financial Management Service, Fiscal Service, Treasury. ACTION: Notice and Request for comments. SUMMARY: The Financial Management...

Black Lung Benefits Act: standards for chest radiographs. Direct final rule; request for comments.

Science.gov (United States)

2013-06-13

Physicians and adjudicators use chest radiographs (X-rays) as a tool in evaluating whether a coal miner suffers from pneumoconiosis (black lung disease). Accordingly, the Department's regulations implementing the Black Lung Benefits Act allow the submission of radiographs in connection with benefit claims and set out quality standards for their performance. These standards are currently limited to film radiographs. In recent years, many medical facilities have phased out film radiography in favor of digital radiography. This direct final rule updates the existing film-radiograph standards and provides parallel standards for digital radiographs. This rule also updates outdated terminology and removes certain obsolete provisions.

A Proposal for Updated Standards of Photographic Documentation in Aesthetic Medicine.

Science.gov (United States)

Prantl, Lukas; Brandl, Dirk; Ceballos, Patricia

2017-08-01

In 1998, DiBernardo et al. published a very helpful standardization of comparative (before and after) photographic documentation. These standards prevail to this day. Although most of them are useful for objective documentation of aesthetic results, there are at least 3 reasons why an update is necessary at this time: First, DiBernardo et al. focused on the prevalent standards of medical photography at that time. From a modern perspective, these standards are antiquated and not always correct. Second, silver-based analog photography has mutated into digital photography. Digitalization offers virtually unlimited potential for image manipulation using a vast array of digital Apps and tools including, but not limited to, image editing software like Photoshop. Digitalization has given rise to new questions, particularly regarding appropriate use of editing techniques to maximize or increase objectivity. Third, we suggest changes to a very small number of their medical standards in the interest of obtaining a better or more objective documentation of aesthetic results. This article is structured into 3 sections and is intended as a new proposal for photographic and medical standards for the documentation of aesthetic interventions: 1. The photographic standards. 2. The medical standards. 3. Description of editing tools which should be used to increase objectivity.

77 FR 39341 - Proposed Information Collection (Annual-Final Report and Account) Activity: Comment Request

Science.gov (United States)

2012-07-02

... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-0017] Proposed Information Collection (Annual-Final Report and Account) Activity: Comment Request AGENCY: Veterans Benefits Administration, Department... of certain information by the agency. Under the Paperwork Reduction Act (PRA) of 1995, Federal...

75 FR 60171 - Proposed Information Collection (Credit Underwriting Standards and Procedures for Processing VA...

Science.gov (United States)

2010-09-29

... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-0521] Proposed Information Collection (Credit Underwriting Standards and Procedures for Processing VA Guaranteed Loans) Activity: Comment Request AGENCY... comment on the proposed collection of certain information by the agency. Under the Paperwork Reduction Act...

78 FR 60379 - Proposed Information Collection (Credit Underwriting Standards and Procedures for Processing VA...

Science.gov (United States)

2013-10-01

... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-0521] Proposed Information Collection (Credit Underwriting Standards and Procedures for Processing VA Guaranteed Loans) Activity: Comment Request AGENCY... comment on the proposed collection of certain information by the agency. Under the Paperwork Reduction Act...

Proposal of an ISO Standard: Classification of Transients and Accidents for Pressurized Water Reactors

Energy Technology Data Exchange (ETDEWEB)

Jo, Jong Chull [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of); Chung, Bub Dong; Lee, Doo-Jeong; Kim, Jong In; Yoon, Ju Hyun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Jeong, Jae Jun [Pusan National Univ., Busan (Korea, Republic of); Kim, An Sup; Lee, Sang Yoon [Korea Electric Association, Seoul (Korea, Republic of)

2016-05-15

Classification of the events for a nuclear power plant is a fundamental basis for defining nuclear safety functions, safety systems performing those functions, and specific acceptance criteria for safety analyses. Presently, the approaches for the event classification adopted by the nuclear suppliers are different, which makes a nuclear technology trade barrier. The IAEA and WENRA are making efforts to establish general requirements or guidelines on the classification of either plant states or defence-in-depth levels for the design of nuclear power plants. However, the requirements and guidelines do not provide the details for practical application to various types of commercial PWRs. Recently, Korea proposed a new ISO standardisation project to develop a harmonized or consolidated international standard for classifying the events in PWRs and for defining (or imposing) the acceptance criteria for reactor design and/or radiation protection corresponding to each event class. This paper briefs the method with strategies for developing the standard, the current various practices of the PWR event classification and acceptance criteria developed or adopted by several organizations in USA and Europe, and a draft of the proposed standard. The proposed standard will affect all the relevant stakeholders such as reactor designers, vendors, suppliers, utilities, regulatory bodies, and publics of the leading countries in the area of nuclear industry as well as utilities, regulatory bodies, and publics of the newly entering (starting) countries. It is expected that all of the stakeholders will benefit from the proposed deliverable which provides an internationally harmonized standard for classifying the PWR events as follows: The reactor design bases for assuring safety and related technical information can be effectively communicated and shared among them resulting in enhancement of the global nuclear safety and fosterage of the global nuclear trade. The countries starting

Leo Spacecraft Charging Design Guidelines: A Proposed NASA Standard

Science.gov (United States)

Hillard, G. B.; Ferguson, D. C.

2004-01-01

Over the past decade, Low Earth Orbiting (LEO) spacecraft have gradually required ever-increasing power levels. As a rule, this has been accomplished through the use of high voltage systems. Recent failures and anomalies on such spacecraft have been traced to various design practices and materials choices related to the high voltage solar arrays. NASA Glenn has studied these anomalies including plasma chamber testing on arrays similar to those that experienced difficulties on orbit. Many others in the community have been involved in a comprehensive effort to understand the problems and to develop practices to avoid them. The NASA Space Environments and Effects program, recognizing the timeliness of this effort, commissioned and funded a design guidelines document intended to capture the current state of understanding. This document, which was completed in the spring of 2003, has been submitted as a proposed NASA standard. We present here an overview of this document and discuss the effort to develop it as a NASA standard.

77 FR 23747 - Notice of Availability of the Proposed John Day Basin Resource Management Plan and Final...

Science.gov (United States)

2012-04-20

... Management Plan (RMP)/Final Environmental Impact Statement (EIS) for the John Day Basin planning area and by... DEPARTMENT OF THE INTERIOR Bureau of Land Management [LLORP0000.16100000.DQ0000 LXSS053H0000 HAG10-0234] Notice of Availability of the Proposed John Day Basin Resource Management Plan and Final...

75 FR 75186 - Interview Room Video System Standard Special Technical Committee Request for Proposals for...

Science.gov (United States)

2010-12-02

... DEPARTMENT OF JUSTICE Office of Justice Programs [OJP (NIJ) Docket No. 1534] Interview Room Video System Standard Special Technical Committee Request for Proposals for Certification and Testing Expertise... Interview Room Video System Standard and corresponding certification program requirements. This work is...

77 FR 76067 - Notice of Availability of a Proposed Land Use Plan Amendment and Final Environmental Impact...

Science.gov (United States)

2012-12-26

... DEPARTMENT OF THE INTERIOR Bureau of Land Management [CACA-051552, LLCAD0700 L51010000 FX0000 LVRWB10B3980] Notice of Availability of a Proposed Land Use Plan Amendment and Final Environmental Impact Statement for the Proposed McCoy Solar Energy Project, CA AGENCY: Bureau of Land Management, Interior...

Green Train. Concept Proposal for a Scandinavian High-speed Train. Final Report Pt. B

Energy Technology Data Exchange (ETDEWEB)

Andersson, Evert

2012-11-01

Groena Taaget (English: Green Train) is a research and development programme, the aim of which is to define a concept and develop technology for future high-speed trains for the Nordic European market. The target is a train for Scandinavian interoperability (Denmark, Norway and Sweden), although the pan-European minimum standards must be applied. Groena Taaget is a concept for long-distance and fast regional rail services. It should be suitable for specific Nordic conditions with a harsh winter climate as well as mixed passenger and freight operations on non-perfect track. Groena Taaget delivers a collection of ideas, proposals and technical solutions for rail operators, infrastructure managers and industry. The programme aims to define a fast, attractive, environmentally friendly and economically efficient high-speed train concept based on passenger valuations and technical possibilities. Proposals do not take corporate policies into account as these may vary between companies and over time. This is one of the final reports, specifying the functional requirements for the train concept from a technical, environmental and economic perspective, with an emphasis on the areas where research and development have been carried out within the Groena Taaget programme. It is not a complete specification of a new train, but concentrates on issues that are particularly important for successful use in the Scandinavian market. It should be regarded as a complement to the pan-European standards. Research and development within the Groena Taaget programme, including analysis and testing activities, are summarized. References are given to reports from the different projects in the programme but also to other relevant work. Other summary reports deal with market, economy and operational aspects as well as a design for an attractive, efficient and innovative train from a traveller's point of view. The main alternative proposed in this concept specification is a train for speeds

Proposed Accreditation Standards for Degree-Granting Correspondence Programs Offered by Accredited Institutions.

Science.gov (United States)

McGraw-Hill Continuing Education Center, Washington, DC.

A study on proposed accreditation standards grew out of a need to (1) stimulate the growth of quality correspondence degree programs; and (2) provide a policy for accreditation of correspondence degree programs so that graduates would be encouraged to pursue advanced degree programs offered elsewhere by educational institutions. The study focused…

77 FR 74449 - Water Quality Standards for the State of Florida's Lakes and Flowing Waters; Proposed Rule; Stay

Science.gov (United States)

2012-12-14

... Water Quality Standards for the State of Florida's Lakes and Flowing Waters; Proposed Rule; Stay AGENCY... Protection Agency (EPA) proposes to temporarily stay our regulation the ``Water Quality Standards for the... Information Does this action apply to me? Citizens concerned with water quality in Florida may be interested...

21 CFR 130.20 - Food additives proposed for use in foods for which definitions and standards of identity are...

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Food additives proposed for use in foods for which...: GENERAL Food Additives in Standardized Foods § 130.20 Food additives proposed for use in foods for which... the act, which proposes the inclusion of a food additive in such definition and standard of identity...

Medicare program; update of ratesetting methodology, payment rates, payment policies, and the list of covered procedures for ambulatory surgical centers effective October 1, 1998; reopening of comment period and delay in adoption of the proposed rule as final--HCFA. Notice of reopening of comment period for proposed rule and delay in adoption of provisions of the proposed rule as final.

Science.gov (United States)

1998-10-01

This notice reopens the comment period for a proposed rule affecting Medicare payments to ambulatory surgical centers (ASCs) that was originally published in the Federal Register on June 12, 1998 (63 FR 32290). This document gives notice of a delay in the adoption of the provisions of the June 12, 1998 ASC proposed rule as a final rule to be concurrent with the adoption as final of the hospital outpatient prospective payment system (PPS) that is the subject of a proposed rule published in the Federal Register on September 8, 1998 (63 FR 47551). In addition this document confirms that the current ASC payment rates that are effective for services furnished on or after October 1, 1998, will remain in effect until rebased ASC rates and the provisions of the June 12, 1998 ASC proposed rule are adopted as final to be concurrent with the adoption as final of the Medicare hospital PPS.

75 FR 38168 - Federal Motor Vehicle Theft Prevention Standard; Final Listing of 2011 Light Duty Truck Lines...

Science.gov (United States)

2010-07-01

... Theft Prevention Standard; Final Listing of 2011 Light Duty Truck Lines Subject to the Requirements of... light-duty truck lines subject to the requirements of the Federal motor vehicle theft prevention... exemption from the parts marking requirements of the Theft Prevention Standard for the Jaguar XJ vehicle...

Validation of Proposed Metrics for Two-Body Abrasion Scratch Test Analysis Standards

Science.gov (United States)

Street, Kenneth W., Jr.; Kobrick, Ryan L.; Klaus, David M.

2013-01-01

Abrasion of mechanical components and fabrics by soil on Earth is typically minimized by the effects of atmosphere and water. Potentially abrasive particles lose sharp and pointed geometrical features through erosion. In environments where such erosion does not exist, such as the vacuum of the Moon, particles retain sharp geometries associated with fracturing of their parent particles by micrometeorite impacts. The relationship between hardness of the abrasive and that of the material being abraded is well understood, such that the abrasive ability of a material can be estimated as a function of the ratio of the hardness of the two interacting materials. Knowing the abrasive nature of an environment (abrasive)/construction material is crucial to designing durable equipment for use in such surroundings. The objective of this work was to evaluate a set of standardized metrics proposed for characterizing a surface that has been scratched from a two-body abrasion test. This is achieved by defining a new abrasion region termed Zone of Interaction (ZOI). The ZOI describes the full surface profile of all peaks and valleys, rather than just measuring a scratch width. The ZOI has been found to be at least twice the size of a standard width measurement; in some cases, considerably greater, indicating that at least half of the disturbed surface area would be neglected without this insight. The ZOI is used to calculate a more robust data set of volume measurements that can be used to computationally reconstruct a resultant profile for de tailed analysis. Documenting additional changes to various surface roughness par ameters also allows key material attributes of importance to ultimate design applications to be quantified, such as depth of penetration and final abraded surface roughness. Further - more, by investigating the use of custom scratch tips for specific needs, the usefulness of having an abrasion metric that can measure the displaced volume in this standardized

Experiments on the TECFLAM standard burner. Final colloquium; Experimente am TECFLAM Standard-Brenner. Abschlusskolloquium

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

This year's annual seminar had two main subjects: First, the final colloquium of the CRAY-TECFLAM project in which an industrial code for simulation of combustion processes in furnaces and gas turbines was developed in cooperation with the relevant industry, and secondly, investigations on a TECFLAM standard burner which served to establish a reliable set of state variables by different methods that were applied simultaneously, as well as the validation of the mathematical models. [German] Das alljaehrliche oeffentliche Seminar stand in diesem Jahr unter zwei zentralen Themen: zum einen das Abschlusskolloquium des CRAY-TECFLAM-Projekts, in dem ein Industriecode zur Simulation der Verbrennungsvorgaenge in Feuerungen und Gasturbinen - unter Beteiligung der relevanten Industrie - entwickelt wurde, zum anderen die Untersuchungen am TECFLAM Standardbrenner, mit denen ein verlaesslicher Satz von Zustandsgroessen mit unterschiedlichen, aber simultan angewandten Messmethoden ermittelt wird und die mathematischen Modelle validiert werden. (orig.)

Foundational aspects of non standard mathematics

CERN Document Server

Ballard, David

1994-01-01

This work proposes a major new extension of "non"standard mathematics. Addressed to a general mathematical audience, the book is intended to be philosophically provocative. The model theory on which "non"standard mathematics has been based is first reformulated within point set topology, which facilitates proofs and adds perspective. These topological techniques are then used to give new, uniform conservativity proofs for the various versions of "non"standard mathematics proposed by Nelson, Hrbáček, and Kawai. The proofs allow for sharp comparison. Addressing broader issues, Ballard then argues that what is novel in these forms of "non"standard mathematics is the introduction, however tentative, of relativity in one's mathematical environment. This hints at the possibility of a mathematical environment which is radically relativistic. The work's major and final feature is to present and prove conservative a version of "non"standard mathematics which, for the first time, illustrates this full radical relativ...

Waist Circumferences of Chilean Students: Comparison of the CDC-2012 Standard and Proposed Percentile Curves

Directory of Open Access Journals (Sweden)

Rossana Gómez-Campos

2015-07-01

Full Text Available The measurement of waist circumference (WC is considered to be an important means to control overweight and obesity in children and adolescents. The objectives of the study were to (a compare the WC measurements of Chilean students with the international CDC-2012 standard and other international standards, and (b propose a specific measurement value for the WC of Chilean students based on age and sex. A total of 3892 students (6 to 18 years old were assessed. Weight, height, body mass index (BMI, and WC were measured. WC was compared with the CDC-2012 international standard. Percentiles were constructed based on the LMS method. Chilean males had a greater WC during infancy. Subsequently, in late adolescence, males showed values lower than those of the international standards. Chilean females demonstrated values similar to the standards until the age of 12. Subsequently, females showed lower values. The 85th and 95th percentiles were adopted as cutoff points for evaluating overweight and obesity based on age and sex. The WC of Chilean students differs from the CDC-2012 curves. The regional norms proposed are a means to identify children and adolescents with a high risk of suffering from overweight and obesity disorders.

Waist Circumferences of Chilean Students: Comparison of the CDC-2012 Standard and Proposed Percentile Curves

Science.gov (United States)

Gómez-Campos, Rossana; Lee Andruske, Cinthya; Hespanhol, Jefferson; Sulla Torres, Jose; Arruda, Miguel; Luarte-Rocha, Cristian; Cossio-Bolaños, Marco Antonio

2015-01-01

The measurement of waist circumference (WC) is considered to be an important means to control overweight and obesity in children and adolescents. The objectives of the study were to (a) compare the WC measurements of Chilean students with the international CDC-2012 standard and other international standards, and (b) propose a specific measurement value for the WC of Chilean students based on age and sex. A total of 3892 students (6 to 18 years old) were assessed. Weight, height, body mass index (BMI), and WC were measured. WC was compared with the CDC-2012 international standard. Percentiles were constructed based on the LMS method. Chilean males had a greater WC during infancy. Subsequently, in late adolescence, males showed values lower than those of the international standards. Chilean females demonstrated values similar to the standards until the age of 12. Subsequently, females showed lower values. The 85th and 95th percentiles were adopted as cutoff points for evaluating overweight and obesity based on age and sex. The WC of Chilean students differs from the CDC-2012 curves. The regional norms proposed are a means to identify children and adolescents with a high risk of suffering from overweight and obesity disorders. PMID:26184250

Environmental assessment in support of proposed voluntary energy conservation standard for new residential buildings

Energy Technology Data Exchange (ETDEWEB)

Hadley, D.L.; Parker, G.B.; Callaway, J.W.; Marsh, S.J.; Roop, J.M.; Taylor, Z.T.

1989-06-01

The objective of this environmental assessment (EA) is to identify the potential environmental impacts that could result from the proposed voluntary residential standard (VOLRES) on private sector construction of new residential buildings. 49 refs., 15 tabs.

The proposed alignment system for the Final Focus Test Beam at SLAC

International Nuclear Information System (INIS)

Ruland, R.E.; Fischer, G.E.

1990-09-01

This report describes the current state of work in progress with respect to the geometry, alignment requirements, scenarios, and hardware for meeting the tolerances of the Final Focus Test Beam (FFTB) at SLAC. The methods and systems proposed acknowledge that component motion at the micron level, from whatever cause (ground motion, thermal effects, etc.) must be measured on-line and compensated for on relatively short time scales. To provide an integrated alignment/positioning package, some unique designs for reference systems, calibration of effect electric and magnetic centers, and component movers are introduced. 24 refs., 28 figs

SEnviro: A Sensorized Platform Proposal Using Open Hardware and Open Standards

Directory of Open Access Journals (Sweden)

Sergio Trilles

2015-03-01

Full Text Available The need for constant monitoring of environmental conditions has produced an increase in the development of wireless sensor networks (WSN. The drive towards smart cities has produced the need for smart sensors to be able to monitor what is happening in our cities. This, combined with the decrease in hardware component prices and the increase in the popularity of open hardware, has favored the deployment of sensor networks based on open hardware. The new trends in Internet Protocol (IP communication between sensor nodes allow sensor access via the Internet, turning them into smart objects (Internet of Things and Web of Things. Currently, WSNs provide data in different formats. There is a lack of communication protocol standardization, which turns into interoperability issues when connecting different sensor networks or even when connecting different sensor nodes within the same network. This work presents a sensorized platform proposal that adheres to the principles of the Internet of Things and theWeb of Things. Wireless sensor nodes were built using open hardware solutions, and communications rely on the HTTP/IP Internet protocols. The Open Geospatial Consortium (OGC SensorThings API candidate standard was used as a neutral format to avoid interoperability issues. An environmental WSN developed following the proposed architecture was built as a proof of concept. Details on how to build each node and a study regarding energy concerns are presented.

SEnviro: a sensorized platform proposal using open hardware and open standards.

Science.gov (United States)

Trilles, Sergio; Luján, Alejandro; Belmonte, Óscar; Montoliu, Raúl; Torres-Sospedra, Joaquín; Huerta, Joaquín

2015-03-06

The need for constant monitoring of environmental conditions has produced an increase in the development of wireless sensor networks (WSN). The drive towards smart cities has produced the need for smart sensors to be able to monitor what is happening in our cities. This, combined with the decrease in hardware component prices and the increase in the popularity of open hardware, has favored the deployment of sensor networks based on open hardware. The new trends in Internet Protocol (IP) communication between sensor nodes allow sensor access via the Internet, turning them into smart objects (Internet of Things and Web of Things). Currently, WSNs provide data in different formats. There is a lack of communication protocol standardization, which turns into interoperability issues when connecting different sensor networks or even when connecting different sensor nodes within the same network. This work presents a sensorized platform proposal that adheres to the principles of the Internet of Things and theWeb of Things. Wireless sensor nodes were built using open hardware solutions, and communications rely on the HTTP/IP Internet protocols. The Open Geospatial Consortium (OGC) SensorThings API candidate standard was used as a neutral format to avoid interoperability issues. An environmental WSN developed following the proposed architecture was built as a proof of concept. Details on how to build each node and a study regarding energy concerns are presented.

Standard contract terms regulation in the proposal for a common European sales law

NARCIS (Netherlands)

Loos, M.B.M.

2012-01-01

In this paper, the regulation in standard contract terms in the proposal for a Commono European Sales Law (CESL) is compared with the regulation in the Unfair Terms Directive, the Draft Common Frame of Reference (DCFR) and the Vienna Sales Convention (CISG). The paper starts with an overview of the

Radiation protection standards for the occupational workers and the public

International Nuclear Information System (INIS)

Minkin, S.C.; Dickson, R.L.; Halford, D.K.

1987-01-01

Federal Regulations concerning radiation protection standards have been undergoing significant changes within the last decade. In addition to these changes, a proliferation in the number of Federal radiation standards has also occurred. A tabulation of these regulations aids in the understanding of which current standards apply to the nuclear industry with respect to environmental contamination and exposure to workers, and the public. Furthermore, most of the current regulations, proposed revisions, and proposed new rulings fall into several major categories. A tabulation of these categories illustrates common public, occupational, and environmental needs for which the DOE, NRC, and EPA have developed their specific radiation standards. Finally, risk based systems for radiation protection have been proposed by the DOE, NRC, and EPA, although these agencies are not entirely consistent in the application of this methodology. 2 tables

77 FR 22637 - Federal Motor Vehicle Safety Standards; Accelerator Control Systems

Science.gov (United States)

2012-04-16

... revise the Federal Motor Vehicle Safety Standard for accelerator control systems (ACS) in two ways. First... Standard (FMVSS) No. 124, Accelerator Control Systems,\\2\\ in two ways. First, we are proposing to update... February 2011 final report ``Technical Assessment of Toyota Electronic Throttle Control Systems,'' the...

Environmental assessment for the Consumer Products Efficiency Standards program

Energy Technology Data Exchange (ETDEWEB)

1980-05-23

The Energy Policy and Conservation Act of 1975 as amended by the National Energy Conservation Policy Act of 1978, requires the DOE to prescribe energy efficiency standards for thirteen consumer products. The Consumer Products Efficiency Standards (CPES) program covers the following products: refrigerators and refrigerator-freezers; freezers;clothes dryers;water heaters; room air conditioners; home heating equipment (not including furnaces); kitchen ranges and ovens; central air conditioners (cooling and heat pumps); furnaces; dishwashers; television sets; clothes washers; and humidifiers and dehumidifiers. DOE is proposing two sets of standards for all thirteen consumer products: intermediate standards to become effective in 1981 for the first nine products and in 1982 for the second four products, and final standards to become effective in 1986 and 1987, respectively. The final standards are more restrictive than the intermediate standards and will provide manufacturers with the maximum time permitted under the Act to plan and develop extensive new lines of efficient consumer products. The final standards proposed by DOE require the maximum improvements in efficiency which are technologically feasible and economically justified, as required by Section 325(c) of EPCA. The thirteen consumer products account for approximately 90% of all the energy consumed in the nation's residences, or more than 20% of the nation's energy needs. Increases in the energy efficiency of these consumer products can help to narrow the gap between the nation's increasing demand for energy and decreasing supplies of domestic oil and natural gas. Improvements in the efficiency of consumer products can thus help to solve the nation's energy crisis.

Technical comments on EPA`s proposed revisions to the National Ambient Air Quality Standard for particulate matter

Energy Technology Data Exchange (ETDEWEB)

Lipfert, F.W.

1997-03-01

The US Environmental Protection Agency (EPA) has proposed new ambient air quality standards specifically for fine particulate matter, regulating concentrations of particles with median aerodynamic diameters less than 2.5 {mu}m (PM{sub 2.5}). Two new standards have been proposed: a maximum 24-hr concentration that is intended to protect against acute health effects, and an annual concentration limit that is intended to protect against longer-term health effects. EPA has also proposed a slight relaxation of the 24-hr standard for inhalable particles (PM{sub 10}), by allowing additional exceedances each year. Fine particles are currently being indirectly controlled by means of regulations for PM{sub 10} and TSP, under the Clean Air Act of 1970 and subsequent amendments. Although routine monitoring of PM{sub 2.5} is rare and data are sparse, the available data indicate that ambient concentrations have been declining at about 6% per year under existing regulations.

78 FR 12347 - Notice of Availability of the Proposed Resource Management Plan and Final Environmental Impact...

Science.gov (United States)

2013-02-22

... DEPARTMENT OF THE INTERIOR Bureau of Land Management [LLWYR05000 L16100000.DQ0000 LXSS04 K0000] Notice of Availability of the Proposed Resource Management Plan and Final Environmental Impact Statement for the Lander Field Office Planning Area, WY AGENCY: Bureau of Land Management, Interior. ACTION...

76 FR 52997 - Public Company Accounting Oversight Board; Order Approving Proposed Board Funding Final Rules for...

Science.gov (United States)

2011-08-24

... Accounting Oversight Board; Order Approving Proposed Board Funding Final Rules for Allocation of the Board's... August 18, 2011. I. Introduction On June 21, 2011, the Public Company Accounting Oversight Board (the... public accounting firm, in amounts that are sufficient to cover the costs of processing and reviewing...

Towards reporting standards for neuropsychological study results: A proposal to minimize communication errors with standardized qualitative descriptors for normalized test scores.

Science.gov (United States)

Schoenberg, Mike R; Rum, Ruba S

2017-11-01

Rapid, clear and efficient communication of neuropsychological results is essential to benefit patient care. Errors in communication are a lead cause of medical errors; nevertheless, there remains a lack of consistency in how neuropsychological scores are communicated. A major limitation in the communication of neuropsychological results is the inconsistent use of qualitative descriptors for standardized test scores and the use of vague terminology. PubMed search from 1 Jan 2007 to 1 Aug 2016 to identify guidelines or consensus statements for the description and reporting of qualitative terms to communicate neuropsychological test scores was conducted. The review found the use of confusing and overlapping terms to describe various ranges of percentile standardized test scores. In response, we propose a simplified set of qualitative descriptors for normalized test scores (Q-Simple) as a means to reduce errors in communicating test results. The Q-Simple qualitative terms are: 'very superior', 'superior', 'high average', 'average', 'low average', 'borderline' and 'abnormal/impaired'. A case example illustrates the proposed Q-Simple qualitative classification system to communicate neuropsychological results for neurosurgical planning. The Q-Simple qualitative descriptor system is aimed as a means to improve and standardize communication of standardized neuropsychological test scores. Research are needed to further evaluate neuropsychological communication errors. Conveying the clinical implications of neuropsychological results in a manner that minimizes risk for communication errors is a quintessential component of evidence-based practice. Copyright © 2017 Elsevier B.V. All rights reserved.

75 FR 45579 - Water Quality Standards for the State of Florida's Lakes and Flowing Waters; Supplemental Notice...

Science.gov (United States)

2010-08-03

... Water Quality Standards for the State of Florida's Lakes and Flowing Waters; Supplemental Notice of Data...), proposing numeric nutrient water quality criteria to protect aquatic life in lakes and flowing waters within... will consider the comments received before finalizing the proposed rule, ``Water Quality Standards for...

Classical table services in commercial catering: standardization proposal and clarifications for future researches

Directory of Open Access Journals (Sweden)

Rodolfo Wendhausen Krause

2016-08-01

Full Text Available This study aims to synthesize the scientific knowledge with the empirical knowledge of the authors of this article on the four main types/styles of individual services in gastronomic full service establishments. In addition, it seeks to, as secondary objectives, to simplify and standardize the types of classic services in restaurants. These objectives were met through a positivist methodological approach. It had as research techniques a comparative analysis and synthesis of the state of the art on the typology of classical services with the empirical knowledge of the authors. Subsequently, the validation of standardization proposal was made by a panel of evaluators. We came to simplify the services into three basic categories: French Service; Direct English Service and Platted Service. It is understood that, because it is an exploratory study, the proposal is the beginning of scientific research on the subject. Therefore, it has to be investigated in greater depth in future studies. Therefore, the research field of the mise en place is the area that greater needs research of this nature.

Final technical evaluation report for the proposed revised reclamation plan for the Atlas Corporation Moab Mill

International Nuclear Information System (INIS)

1997-03-01

This final Technical Evaluation Report (TER) summarizes the US Nuclear Regulatory Commission staff's review of Atlas Corporation's proposed reclamation plan for its uranium mill tailings pile near Moab, Utah. The proposed reclamation would allow Atlas to (1) reclaim the tailings pile for permanent disposal and long-term custodial care by a government agency in its current location on the Moab site, (2) prepare the site for closure, and (3) relinquish responsibility of the site after having its NRC license terminated. The NRC staff concludes that, subject to license conditions identified in the TER, the proposed reclamation plan meets the requirements identified in NRC regulations, which appear primarily in 10 CFR Part 40. 112 refs., 6 figs., 16 tabs

Sewage Treatment Plants: Standards of Performance for New Stationary Sources 1977 Final Rule (42 FR 58520)

Science.gov (United States)

This document includes a copy of the Federal Register publication of the November 10, 1977 Final Rule for the Standards of Performance of New Stationary Sources for 40 CFR 60 Subparts O. This document is provided curtesy of HeinOnline.

Sulfur Dioxide (SO2) Primary Standards Documents from Current Review - Federal Register Notices

Science.gov (United States)

EPA develops and publishes a notice of proposed rulemaking regarding the review of the SO2 national ambient air quality standards (NAAQS). A public comment period follows. Taking into account comments received on the proposed rule, EPA issues a final rule.

78 FR 59981 - Proposed Revision to Physical Security-Standard Design Certification and Operating Reactors

Science.gov (United States)

2013-09-30

... Design Certification and Operating Reactors AGENCY: Nuclear Regulatory Commission. ACTION: Standard... Design Certification and Operating Reactors.'' The NRC seeks comments on the proposed revised section of... subject): Federal Rulemaking Web site: Go to http://www.regulations.gov and search for Docket ID NRC-2013...

Final technical evaluation report for the proposed revised reclamation plan for the Atlas Corporation Moab Mill

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This final Technical Evaluation Report (TER) summarizes the US Nuclear Regulatory Commission staff`s review of Atlas Corporation`s proposed reclamation plan for its uranium mill tailings pile near Moab, Utah. The proposed reclamation would allow Atlas to (1) reclaim the tailings pile for permanent disposal and long-term custodial care by a government agency in its current location on the Moab site, (2) prepare the site for closure, and (3) relinquish responsibility of the site after having its NRC license terminated. The NRC staff concludes that, subject to license conditions identified in the TER, the proposed reclamation plan meets the requirements identified in NRC regulations, which appear primarily in 10 CFR Part 40. 112 refs., 6 figs., 16 tabs.

32 CFR 206.5 - Final proposal process.

Science.gov (United States)

2010-07-01

... the basis of “educational value for the dollar.” NSEP is interested in funding proposals in areas... institution to integrate the efforts of the proposed program into the educational process? What plans are...) MISCELLANEOUS NATIONAL SECURITY EDUCATION PROGRAM (NSEP) GRANTS TO INSTITUTIONS OF HIGHER EDUCATION § 206.5...

Proposed Rule for Control of Air Pollution From New Motor Vehicles: Proposed Heavy-Duty Engine and Vehicle Standards and Highway Diesel Fuel Sulfur Control Requirements

Science.gov (United States)

Rule summary, CFR citations and additional resources concerning proposed new emission standards that will begin to take effect in 2007 and corresponding diesel fuel requirements that take effect in 2006.

75 FR 10121 - Milk in the Northeast and Other Marketing Areas; Final Decision on Proposed Amendments to...

Science.gov (United States)

2010-03-04

... marketing areas. The other 8 orders have no similar route disposition limit. The 3 southeastern orders... Part IV Department of Agriculture Agricultural Marketing Service 7 CFR Parts 1000, 1001, 1005, et al. Milk in the Northeast and Other Marketing Areas; Final Decision on Proposed Amendments to...

76 FR 40950 - Public Company Accounting Oversight Board; Notice of Filing of Proposed Board Funding Final Rules...

Science.gov (United States)

2011-07-12

... available, the issuer's net asset value. (i)(v) Issuer Accounting Support Fee The term ``issuer accounting... Accounting Oversight Board; Notice of Filing of Proposed Board Funding Final Rules for Allocation of the Board's Accounting Support Fee Among Issuers, Brokers, and Dealers, and Other Amendments to the Board's...

TOWARDS THE FORMULATION OF A PROPOSAL FOR OPPORTUNITY-TO-LEARN STANDARDS IN EFL LEARNING AND TEACHING

Directory of Open Access Journals (Sweden)

Rosalba Cárdenas Ramos

2011-08-01

Full Text Available This paper focuses on the need to formulate and implement a proposal for opportunity-to-learn standards (OTL in the field of language learning and teaching in Colombia, with the aim of ensuring the necessary conditions for the implementation and achievement of the performance standards, issued by the Ministry of Education as part of the National Bilingual Program in this area. First, it reviews the concept, origins, composition and models of OTL standards, and then it examines the Colombian situation to make a case for OTL in this country.

A redesign of OGC Symbology Encoding standard for sharing cartography

Directory of Open Access Journals (Sweden)

Erwan Bocher

2018-01-01

Full Text Available Despite most Spatial Data Infrastructures offering service-based visualization of geospatial data, requirements are often at a very basic level leading to poor quality of maps. This is a general observation for any geospatial architecture as soon as open standards as those of the Open Geospatial Consortium (OGC are applied. To improve the situation, this paper does focus on improvements at the portrayal interoperability side by considering standardization aspects. We propose two major redesign recommendations. First to consolidate the cartographic theory at the core of the OGC Symbology Encoding standard. Secondly to build the standard in a modular way so as to be ready to be extended with upcoming future cartographic requirements. Thus, we start by defining portrayal interoperability by means of typical-use cases that frame the concept of sharing cartography. Then we bring to light the strengths and limits of the relevant open standards to consider in this context. Finally we propose a set of recommendations to overcome the limits so as to make these use cases a true reality. Even if the definition of a cartographic-oriented standard is not able to act as a complete cartographic design framework by itself, we argue that pushing forward the standardization work dedicated to cartography is a way to share and disseminate good practices and finally to improve the quality of the visualizations.

The Final Year Project (FYP) in Social Sciences: Establishment of Its Associated Competences and Evaluation Standards

Science.gov (United States)

Mateo, Joan; Escofet, Anna; Martinez, Francesc; Ventura, Javier; Vlachopoulos, Dimitrios

2012-01-01

This paper presents the fundamental characteristics of the Final Year Project (FYP), its associated competences and some evaluation standards that derived from a research conducted by the regional government of Catalonia (Spain) and the Catalan University Quality Assurance Agency. More analytically, the paper begins with the definition of the…

75 FR 6413 - Office of New Reactors; Proposed Revision to Standard Review Plan, Section 14.3.12 on Physical...

Science.gov (United States)

2010-02-09

... Standard Review Plan, Section 14.3.12 on Physical Security Hardware Inspections, Tests, Analyses, and.... SUMMARY: The NRC is soliciting public comment on NUREG-0800, ``Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants,'' on a proposed Revision 1 to Standard Review Plan (SRP...

Proposed performance standards for the Agricultural Hazardous Occupations Order certification training program.

Science.gov (United States)

French, B F; Field, W E; Tormoehlen, R

2007-07-01

The performance standards that accompany Gearing Up for Safety, the agricultural production safety training curriculum for youth, were designed to meet the certification testing requirements of the Agricultural Hazardous Occupations Order (AgHOs) certification training program. The AgHOs requires that certain youth who are older than 13 and younger than 16 years of age complete a prescribed training program before being eligible for employment on farms to perform certain tasks considered hazardous. These training resources will be available for implementation and can be accessed by contacting the second author. To our knowledge, up until this time, few, if any, standardized testing procedures or instruments have had the necessary psychometric evidence to support use of the resulting scores to assess the readiness of youth to meet the basic certification requirements contained in the AgHOs. This article describes the rationale, methods, and key findings from a standard-setting session held to establish minimum passing scores for a proposed testing process. The test will be used as a component of the Gearing Up for Safety certification process for youth workers seeking employment to perform job functions as specified under the AgHOs. Readers may be able to apply this standardized testing process, or similarly accepted processes, to other or future testing and certification projects involving agricultural safety and health.

78 FR 70067 - Notice of Availability of the Final Environmental Impact Statement for the Proposed Pan Mine...

Science.gov (United States)

2013-11-22

...: Midway Gold US, Inc. (Midway) proposes to construct and operate an open-pit gold mining operation in the northern part of the Pancake Mountain Range, approximately 50 miles west of Ely in White Pine County... Midway Gold Pan Project Exploration Amendment EA (July 2011). The Final EIS describes and analyzes the...

77 FR 22564 - Proposed Collection; Comment Request; Safety Standards for Full-Size Baby Cribs and Non-Full-Size...

Science.gov (United States)

2012-04-16

... CONSUMER PRODUCT SAFETY COMMISSION [Docket No. CPSC-2012-0019] Proposed Collection; Comment Request; Safety Standards for Full- Size Baby Cribs and Non-Full-Size Baby Cribs; Compliance Form AGENCY... safety standards for full-size and non-full-size baby cribs in response to the direction under section...

Standards, criteria, comparative study. Final report 1993-1994

International Nuclear Information System (INIS)

David, M.

1995-01-01

The goal of this report is to compare standards and criteria used for the design of seismic resistant Nuclear Power plants in former USSR and Eastern Europe to the actual practice in Western Europe and USA. A review of USSR and Czech-Slovak standards for design of WWER-1000 NPPs is included. Comparative study deals involves a general comparison of standards and the comparison of seismic loads according to Eastern standards with the to-day practices. According to these comparisons it can be theoretically concluded that despite some differences the structural seismic forces calculated according to Soviet-Russian standards are in good agreement with the ones resulting from Western Standards

Potential noise impact from proposed operations at the Davis Canyon, Utah site: Evaluation of atmospheric acoustic refractive index profiles: Task 1, Final report

International Nuclear Information System (INIS)

Thomson, D.W.

1986-01-01

This study was motivated by the need to assess whether or not there would be significant noise impact from a proposed industrial operation to be sited in Davis Canyon, Utah. Completion of the study required improving several aspects of our fundamental understanding of atmospheric sound propagation and analysis of a diverse set of meteorological measurements which pertained specifically to the Davis Canyon location. The above two ''generic'' and ''specific'' objectives were sufficiently different that this final report has been divided into two parts. The first, generic, portion was prepared because neither existing noise standards nor standard field measurement techniques adequately recognize the importance of normal atmospheric boundary layer structure and processes on the magnitude and variations of noise propagated out-of-doors. The second, specific, part of the report summarizes a variety of acoustically-oriented analyses of meteorological measurements made near Davis Canyon. The results in both parts of the report are based on sophisticated atmospheric analysis, boundary layer and propagation models. The presentation of time dependent ''maps'' of predicted sound pressure levels (also as a function of frequency and source-surrounding topography) represents a significant advance in the state-of-the-art of environmental noise analysis and prediction

A new approach for modeling the peak utility impacts from a proposed CUAC standard

Energy Technology Data Exchange (ETDEWEB)

LaCommare, Kristina Hamachi; Gumerman, Etan; Marnay, Chris; Chan, Peter; Coughlin, Katie

2004-08-01

This report describes a new Berkeley Lab approach for modeling the likely peak electricity load reductions from proposed energy efficiency programs in the National Energy Modeling System (NEMS). This method is presented in the context of the commercial unitary air conditioning (CUAC) energy efficiency standards. A previous report investigating the residential central air conditioning (RCAC) load shapes in NEMS revealed that the peak reduction results were lower than expected. This effect was believed to be due in part to the presence of the squelch, a program algorithm designed to ensure changes in the system load over time are consistent with the input historic trend. The squelch applies a system load-scaling factor that scales any differences between the end-use bottom-up and system loads to maintain consistency with historic trends. To obtain more accurate peak reduction estimates, a new approach for modeling the impact of peaky end uses in NEMS-BT has been developed. The new approach decrements the system load directly, reducing the impact of the squelch on the final results. This report also discusses a number of additional factors, in particular non-coincidence between end-use loads and system loads as represented within NEMS, and their impacts on the peak reductions calculated by NEMS. Using Berkeley Lab's new double-decrement approach reduces the conservation load factor (CLF) on an input load decrement from 25% down to 19% for a SEER 13 CUAC trial standard level, as seen in NEMS-BT output. About 4 GW more in peak capacity reduction results from this new approach as compared to Berkeley Lab's traditional end-use decrement approach, which relied solely on lowering end use energy consumption. The new method has been fully implemented and tested in the Annual Energy Outlook 2003 (AEO2003) version of NEMS and will routinely be applied to future versions. This capability is now available for use in future end-use efficiency or other policy analysis

76 FR 38419 - United States v. George's Foods, LLC, et. al.; Proposed Final Judgment and Competitive Impact...

Science.gov (United States)

2011-06-30

... provisions of Section 5(a) of the Clayton Act, 15 U.S.C. 16(a), the proposed Final Judgment has no prima facie effect in any subsequent private lawsuit that may be brought against George's. V. Procedures... in protecting the public interest is one of insuring that the government has not breached its duty to...

Private animal health and welfare standards in quality assurance programmes: a review and proposed framework for critical evaluation.

Science.gov (United States)

More, S J; Hanlon, A; Marchewka, J; Boyle, L

2017-06-24

In recent years, 'private standards' in animal health and welfare have become increasingly common, and are often incorporated into quality assurance (QA) programmes. Here, we present an overview of the use of private animal health and welfare standards in QA programmes, and propose a generic framework to facilitate critical programme review. Private standards are being developed in direct response to consumer demand for QA, and offer an opportunity for product differentiation and a means to drive consumer choice. Nonetheless, a range of concerns have been raised, relating to the credibility of these standards, their potential as a discriminatory barrier to trade, the multiplicity of private standards that have been developed, the lack of consumer input and compliance costs. There is a need for greater scrutiny of private standards and of associated QA programmes. We propose a framework to clarify the primary programme goal(s) and measureable outputs relevant to animal health and welfare, the primary programme beneficiaries and to determine whether the programme is effective, efficient and transparent. This paper provides a theoretical overview, noting that this framework could be used as a tool directly for programme evaluation, or as a tool to assist with programme development and review. British Veterinary Association.

Nanometrology, Standardization and Regulation of Nanomaterials in Brazil: A Proposal for an Analytical-Prospective Model

Directory of Open Access Journals (Sweden)

Ana Rusmerg Giménez Ledesma

2013-05-01

Full Text Available The main objective of this paper is to propose an analytical-prospective model as a tool to support decision-making processes concerning metrology, standardization and regulation of nanomaterials in Brazil, based on international references and ongoing initiatives in the world. In the context of nanotechnology development in Brazil, the motivation for carrying out this research was to identify potential benefits of metrology, standardization and regulation of nanomaterials production, from the perspective of future adoption of the model by the main stakeholders of development of these areas in Brazil. The main results can be summarized as follows: (i an overview of international studies on metrology, standardization and regulation of nanomaterials, and nanoparticles, in special; (ii the analytical-prospective model; and (iii the survey questionnaire and the roadmapping tool for metrology, standardization and regulation of nanomaterials in Brazil, based on international references and ongoing initiatives in the world.

Ergonomic Analysis of Tricycle Sidecar Seats: Basis for Proposed Standard Design

Directory of Open Access Journals (Sweden)

Michael C. Godoy

2015-12-01

Full Text Available Ergonomics (also called human factors engineering is the study of human characteristics for the appropriate design of the living and work environment. It is applied in various industrial areas which includes transportation.Tricycle being one of the most common means of public transportation in Lipa City has various adaptations to suit the culture, and environment. The purpose of this study is to analyze the variability in design of the tricycles in Lipa City, Philippines and propose a standard ergonomically designed tricycle sidecar seat for a greater population. The study was conducted at 26 tricycle terminals with 232 tricycle samples within Lipa City proper including the public market area where 400 commuters were given questionnaires to determine the risk factors associated with the existing tricycle sidecar seat design. Anthropometric measurements of 100 males and 100 female commuters were obtained together with the sidecar dimensions of 232 tricycles to substantiate the observed variations in design. Using the design for the average and design for the extremes, it was found out that most of the tricycles in Lipa City, Philippines have inappropriate inclined seat and lowered sidecar seat pan height which can result to leg and abdominal pain; narrowed seat pan depth which caused pressure on buttocks and legs; narrowed backrest width which can cause upper and low back pain; low backrest height that can pose upper back pain; which can also result to abdominal pain; inclined backrest and limited vertical clearance which can cause upper back pain and neck pain. The researcher proposed a sidecar seat design standard which can be used by the Land Transportation Office, and Land Transportation Franchising and Regulatory Board to provide ease, comfort, and convenience to the passengers.

Proposed American National Standard ANS 8.22: Nuclear criticality safety based on limiting and controlling moderators

International Nuclear Information System (INIS)

Bullington, J.S.

1996-01-01

This proposed standard features guidance for dealing with the combination of fissile material and moderators in moderator control areas. The main points include nuclear criticality safety practices, encompassing administrative practices and process evaluations, and engineering practices, encompassing moderator control area barriers, equipment and containers, penetrations, fire prevention and suppression, and active engineered controls. Four appendixes follow the standard; the subject of these appendixes are typical moderating materials, potential sources of moderators, moderator control measurements, and engineered barriers to control moderators

Final height in survivors of childhood cancer compared with Height Standard Deviation Scores at diagnosis.

Science.gov (United States)

Knijnenburg, S L; Raemaekers, S; van den Berg, H; van Dijk, I W E M; Lieverst, J A; van der Pal, H J; Jaspers, M W M; Caron, H N; Kremer, L C; van Santen, H M

2013-04-01

Our study aimed to evaluate final height in a cohort of Dutch childhood cancer survivors (CCS) and assess possible determinants of final height, including height at diagnosis. We calculated standard deviation scores (SDS) for height at initial cancer diagnosis and height in adulthood in a cohort of 573 CCS. Multivariable regression analyses were carried out to estimate the influence of different determinants on height SDS at follow-up. Overall, survivors had a normal height SDS at cancer diagnosis. However, at follow-up in adulthood, 8.9% had a height ≤-2 SDS. Height SDS at diagnosis was an important determinant for adult height SDS. Children treated with (higher doses of) radiotherapy showed significantly reduced final height SDS. Survivors treated with total body irradiation (TBI) and craniospinal radiation had the greatest loss in height (-1.56 and -1.37 SDS, respectively). Younger age at diagnosis contributed negatively to final height. Height at diagnosis was an important determinant for height SDS at follow-up. Survivors treated with TBI, cranial and craniospinal irradiation should be monitored periodically for adequate linear growth, to enable treatment on time if necessary. For correct interpretation of treatment-related late effects studies in CCS, pre-treatment data should always be included.

78 FR 50358 - Notice of Intent To Prepare an Environmental Impact Statement for the Proposed Rule, Standards...

Science.gov (United States)

2013-08-19

... Escherichia. coli exceedance of the proposed standard occurred during 5 percent of the monitoring period with.../2013/5079/SIR2013-5079.pdf . Accessed July 30, 2013. Dated: August 13, 2013. Leslie Kux, Assistant...

76 FR 31381 - Office Of New Reactors; Proposed Revision 4 to Standard Review Plan; Section 8.1 on Electric...

Science.gov (United States)

2011-05-31

... Standard Review Plan; Section 8.1 on Electric Power--Introduction AGENCY: U.S. Nuclear Regulatory...,'' on a proposed Revision 4 to Standard Review Plan (SRP), Section 8.1 on ``Electric Power--Introduction,'' (Agencywide Documents Access and Management System (ADAMS) Accession No. ML111180542). The previous version of...

78 FR 33437 - United States v. Apple, Inc., et al.; Public Comments and Response on Proposed Final Judgment

Science.gov (United States)

2013-06-04

... of electronic books (``e-books'') in the United States in violation of Section 1 of the Sherman Act... e-book retailers that restrict retailer discounting, see proposed Macmillan Final Judgment, Sec. Sec... retailers from discounting its e-books. See id. Sec. V.B. These provisions will help ensure that new...

Final programmatic environmental impact statement for the uranium mill tailings remedial action ground water project. Volume I

Energy Technology Data Exchange (ETDEWEB)

None

1996-10-01

This programmatic environmental impact statement (PElS) was prepared for the Uranium Mill Tailings Remedial Action (UMTRA) Ground Water Project to comply with the National Environmental Policy Act (NEPA). This PElS provides an analysis of the potential impacts of the alternatives and ground water compliance strategies as well as potential cumulative impacts. On November 8, 1978, Congress enacted the Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, Public Law, codified at 42 USC §7901 et seq. Congress found that uranium mill tailings " ... may pose a potential and significant radiation health hazard to the public, and that every reasonable effort should be made to provide for stabilization, disposal, and control in a safe, and environmentally sound manner of such tailings in order to prevent or minimize other environmental hazards from such tailings." Congress authorized the Secretary of Energy to designate inactive uranium processing sites for remedial action by the U.S. Department of Energy (DOE). Congress also directed the U.S. Environmental Protection Agency (EPA) to set the standards to be followed by the DOE for this process of stabilization, disposal, and control. On January 5, 1983, EPA published standards (40 CFR Part 192) for the disposal and cleanup of residual radioactive materials. On September 3, 1985, the U.S. Court of Appeals for the Tenth Circuit set aside and remanded to EPA the ground water provisions of the standards. The EPA proposed new standards to replace remanded sections and changed other sections of 40 CFR Part 192. These proposed standards were published in the Federal Register on September 24, 1987 (52 FR 36000). Section 108 of the UMTRCA requires that DOE comply with EPA's proposed standards in the absence of final standards. The Ground Water Project was planned under the proposed standards. On January 11, 1995, EPA published the final rule, with which the DOE must now comply. The PElS and the Ground Water Project are

Final programmatic environmental impact statement for the uranium mill tailings remedial action ground water project. Volume I

International Nuclear Information System (INIS)

1996-01-01

This programmatic environmental impact statement (PElS) was prepared for the Uranium Mill Tailings Remedial Action (UMTRA) Ground Water Project to comply with the National Environmental Policy Act (NEPA). This PElS provides an analysis of the potential impacts of the alternatives and ground water compliance strategies as well as potential cumulative impacts. On November 8, 1978, Congress enacted the Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, Public Law, codified at 42 USC §7901 et seq. Congress found that uranium mill tailings ' ... may pose a potential and significant radiation health hazard to the public, and that every reasonable effort should be made to provide for stabilization, disposal, and control in a safe, and environmentally sound manner of such tailings in order to prevent or minimize other environmental hazards from such tailings.' Congress authorized the Secretary of Energy to designate inactive uranium processing sites for remedial action by the U.S. Department of Energy (DOE). Congress also directed the U.S. Environmental Protection Agency (EPA) to set the standards to be followed by the DOE for this process of stabilization, disposal, and control. On January 5, 1983, EPA published standards (40 CFR Part 192) for the disposal and cleanup of residual radioactive materials. On September 3, 1985, the U.S. Court of Appeals for the Tenth Circuit set aside and remanded to EPA the ground water provisions of the standards. The EPA proposed new standards to replace remanded sections and changed other sections of 40 CFR Part 192. These proposed standards were published in the Federal Register on September 24, 1987 (52 FR 36000). Section 108 of the UMTRCA requires that DOE comply with EPA's proposed standards in the absence of final standards. The Ground Water Project was planned under the proposed standards. On January 11, 1995, EPA published the final rule, with which the DOE must now comply. The PElS and the Ground Water Project are in

75 FR 29588 - Office of New Reactors: Proposed NUREG-0800; Standard Review Plan Section 13.6.6, Draft Revision...

Science.gov (United States)

2010-05-26

...; Standard Review Plan Section 13.6.6, Draft Revision 0 on Cyber Security Plan AGENCY: Nuclear Regulatory... Plants,'' on a proposed Standard Review Plan (SRP) Section 13.6.6 on ``Cyber Security Plan'' (Agencywide Documents Access and Management System (ADAMS) Accession No. ML093560837). The Office of Nuclear Security...

Recommendations for enforcing and administering lighting-efficiency standards in existing public buildings in New York State. Final report

Energy Technology Data Exchange (ETDEWEB)

None

1977-09-30

To determine the most efficient, cost-effective means of enforcing lighting standards in existing public buildings, various enforcement procedures were investigated. A summary of conclusions and recommendations are presented. In Chapter 1, the adoption of a modified version of the sections of the proposed ASHRAE 100 standards that relate to lighting is recommended. The basic features of the proposed ASHRAE 100 standards are described and compared with those of other types of standards, and the modifications recommended to facilitate implementation are then presented. In Chapter 2, the structure is outlined and the details are provided of the enforcement strategy devised based on self-certification and penalties for noncompliance. Chapter 3 is intended to guide the state in implementing that strategy; it is suggested that the State Energy Office begin to conduct inspections of buildings selected first randomly and then according to a specific discriminant-analysis scheme. The timetable that should be followed and the management responsibilities that should be assigned if the state is to meet its 1980 goals related to saving energy through the implementation of lighting-efficiency standards are delineated in Chapter 4. The appendixes provide additional information and data supporting the specific conclusions and recommendations presented throughout the text. (MCW)

75 FR 39252 - Release of Final Documents Related to the Review of the National Ambient Air Quality Standards...

Science.gov (United States)

2010-07-08

... Quality Standards: Scope and Methods Plan for Health Risk and Exposure Assessment and Particulate Matter... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OAR-2007-0492; FRL-9171-8] Release of Final Documents...: Environmental Protection Agency (EPA). ACTION: Notice of Availability. SUMMARY: The Office of Air Quality...

76 FR 6191 - Proposed Agency Information Collection Activities; Comment Request-Thrift Financial Report

Science.gov (United States)

2011-02-03

...' association concerning the definition of core deposits, which was not an element of the OTS's October 5, 2010.... generally accepted accounting principles (GAAP). The OTS received comments from a bankers' association on... breakdowns by loan category, until the FASB finalizes proposed clarifications to its standards for accounting...

30 CFR 285.216 - What information will MMS publish in the Proposed Sale Notice and Final Sale Notice?

Science.gov (United States)

2010-07-01

... or applications and how the criteria will be used in decision-making for awarding a lease. (f) Award... for leasing. (b) Proposed and final lease provisions and conditions, including, but not limited to: (1...) Minimum bid; (3) Deposit amount; (4) The place and time for filing bids and the place, date, and hour for...

Views of surgery program directors on the current ACGME and proposed IOM duty-hour standards.

Science.gov (United States)

Willis, Ross E; Coverdill, James E; Mellinger, John D; Collins, J Craig; Potts, John R; Dent, Daniel L

2009-01-01

The purpose of this study was to survey the experiences of surgery program directors with the current Accreditation Council for Graduate Medical Education (ACGME) duty-hour standards and views of the Institute of Medicine (IOM) proposed duty-hour recommendations. A total of 118 program directors (47.6% of all surgery programs in the US) responded to the survey. Results showed that the current duty-hour standards have hindered clinical education opportunities by reducing or eliminating rotations on many services, didactic teaching conferences, and clinical bedside teaching opportunities. Additionally, patient safety has been compromised by frequent hand offs of care. Most IOM recommendations were perceived as extremely difficult or impossible to implement, with the exception of the moonlighting recommendation. The results indicated that adopting the IOM recommendations is not feasible given current workforce limitations, and most program directors supported maintaining the current duty-hour standards until such time as there is evidence-based outcomes research to direct change. The conclusion was that the current ACGME duty-hour standards have reduced teaching opportunities and narrowed the scope of training.

A Standards-Based Architecture Proposal for Integrating Patient mHealth Apps to Electronic Health Record Systems.

Science.gov (United States)

Marceglia, S; Fontelo, P; Rossi, E; Ackerman, M J

2015-01-01

Mobile health Applications (mHealth Apps) are opening the way to patients' responsible and active involvement with their own healthcare management. However, apart from Apps allowing patient's access to their electronic health records (EHRs), mHealth Apps are currently developed as dedicated "island systems". Although much work has been done on patient's access to EHRs, transfer of information from mHealth Apps to EHR systems is still low. This study proposes a standards-based architecture that can be adopted by mHealth Apps to exchange information with EHRs to support better quality of care. Following the definition of requirements for the EHR/mHealth App information exchange recently proposed, and after reviewing current standards, we designed the architecture for EHR/mHealth App integration. Then, as a case study, we modeled a system based on the proposed architecture aimed to support home monitoring for congestive heart failure patients. We simulated such process using, on the EHR side, OpenMRS, an open source longitudinal EHR and, on the mHealth App side, the iOS platform. The integration architecture was based on the bi-directional exchange of standard documents (clinical document architecture rel2 - CDA2). In the process, the clinician "prescribes" the home monitoring procedures by creating a CDA2 prescription in the EHR that is sent, encrypted and de-identified, to the mHealth App to create the monitoring calendar. At the scheduled time, the App alerts the patient to start the monitoring. After the measurements are done, the App generates a structured CDA2-compliant monitoring report and sends it to the EHR, thus avoiding local storage. The proposed architecture, even if validated only in a simulation environment, represents a step forward in the integration of personal mHealth Apps into the larger health-IT ecosystem, allowing the bi-directional data exchange between patients and healthcare professionals, supporting the patient's engagement in self

An overview of reactor physics standards: Past, present and future

International Nuclear Information System (INIS)

Cokinos, D.M.

1992-07-01

This report discusses for determining key static reactor physics parameters which have been developed by groups of experts (working groups) under the aegis of ANS-19, the ANS Reactor Physics Standards Committee. Following a series of sequential reviews, augmented by feedback from potential users, a proposed standard is brought into final form by the working group before it is adopted as a formal standard by the American National Standards Institute (ANSI); Reactor Physics standards are intended to provide guidance in the performance and qualification of complex sequences of reactor calculations and/or measurements and are regularly reviewed for possible updates and/or revisions. The reactor physics standards developed to date are listed and standards now being developed by the respective working groups are also provided

75 FR 7304 - Notice of Statute of Limitations on Claims; Notice of Final Federal Agency Actions on Proposed...

Science.gov (United States)

2010-02-18

..., that are final within the meaning of 23 U.S.C. 139(l)(1). The actions relate to a proposed Physical Suicide Deterrent System on the Golden Gate Bridge on US Route 101 at the San Francisco/Marin County line... in the State of California: The Golden Gate Bridge Physical Suicide Deterrent System on US Route 101...

75 FR 69709 - Office of New Reactors; Notice of Availability of the Final Staff Guidance; Standard Review Plan...

Science.gov (United States)

2010-11-15

... the Final Staff Guidance; Standard Review Plan, Section 13.6.6, Revision 0 on Cyber Security Plan... Reports for Nuclear Power Plants,'' Section 13.6.6, Revision 0 on ``Cyber Security Plan'' (Agencywide... reviews to amendments to licenses for operating reactors or for activities associated with review of...

Methodological aspects of clinical trials in tinnitus: A proposal for an international standard

Science.gov (United States)

Landgrebe, Michael; Azevedo, Andréia; Baguley, David; Bauer, Carol; Cacace, Anthony; Coelho, Claudia; Dornhoffer, John; Figueiredo, Ricardo; Flor, Herta; Hajak, Goeran; van de Heyning, Paul; Hiller, Wolfgang; Khedr, Eman; Kleinjung, Tobias; Koller, Michael; Lainez, Jose Miguel; Londero, Alain; Martin, William H.; Mennemeier, Mark; Piccirillo, Jay; De Ridder, Dirk; Rupprecht, Rainer; Searchfield, Grant; Vanneste, Sven; Zeman, Florian; Langguth, Berthold

2013-01-01

Chronic tinnitus is a common condition with a high burden of disease. While many different treatments are used in clinical practice, the evidence for the efficacy of these treatments is low and the variance of treatment response between individuals is high. This is most likely due to the great heterogeneity of tinnitus with respect to clinical features as well as underlying pathophysiological mechanisms. There is a clear need to find effective treatment options in tinnitus, however, clinical trials differ substantially with respect to methodological quality and design. Consequently, the conclusions that can be derived from these studies are limited and jeopardize comparison between studies. Here, we discuss our view of the most important aspects of trial design in clinical studies in tinnitus and make suggestions for an international methodological standard in tinnitus trials. We hope that the proposed methodological standard will stimulate scientific discussion and will help to improve the quality of trials in tinnitus. PMID:22789414

PROPOSAL METHODOLOGY OF THE SUBSYSTEM - INTERNAL STANDARDIZATION AS PART OF TQM SYSTEM

Directory of Open Access Journals (Sweden)

Elizabeta Mitreva

2012-09-01

Full Text Available Standardization in the management system becomes a key task of the managers and a priority issue for survival of every organization of this century. Besides the company's owner which is mostly concerned with the profit and fast multiplication of its invested capital, many other parties such as consumers, community, employees, deliverers and the society make a pressure in demanding. As of those demands the organization is to adapt its management system according the standards in order to be safe t hat the expectations will be fulfilled. However, to fulfill the standards in Europe and worldwide it is necessary to approach towards huge - radical changes in problem solving i.e. reengineering, new manner of consideration of causes and not as the so far known way - thinking over the consequences. Implementing this new TQM strategy means designing solidly documented quality system that covers every working process in a company and appears as a necessary base for successful usage of statistical process contr ol (SPC and efficient teamwork which otherwise in case of bad quality system will not be able to be set. In this manner it is guaranteed that the attitude of the top management is conducted; this attitude is consisted within the quality policy that create s a climate and information base whe re team work can be developed. This paper offers a proposal methodology for designing and implementation of internal standardization of TQM system in companies. This methodology is applicable in factory for reconstructio n of wagons and in a factory for confectionary production and has shown its efficiency and usage. In order to design the processes in line with the consumers/ clients content and at the same time to achieve profitability, it is necessary to reengineer the working processes

Final Technical Report: Hydrogen Codes and Standards Outreach

Energy Technology Data Exchange (ETDEWEB)

Hall, Karen I.

2007-05-12

This project contributed significantly to the development of new codes and standards, both domestically and internationally. The NHA collaborated with codes and standards development organizations to identify technical areas of expertise that would be required to produce the codes and standards that industry and DOE felt were required to facilitate commercialization of hydrogen and fuel cell technologies and infrastructure. NHA staff participated directly in technical committees and working groups where issues could be discussed with the appropriate industry groups. In other cases, the NHA recommended specific industry experts to serve on technical committees and working groups where the need for this specific industry expertise would be on-going, and where this approach was likely to contribute to timely completion of the effort. The project also facilitated dialog between codes and standards development organizations, hydrogen and fuel cell experts, the government and national labs, researchers, code officials, industry associations, as well as the public regarding the timeframes for needed codes and standards, industry consensus on technical issues, procedures for implementing changes, and general principles of hydrogen safety. The project facilitated hands-on learning, as participants in several NHA workshops and technical meetings were able to experience hydrogen vehicles, witness hydrogen refueling demonstrations, see metal hydride storage cartridges in operation, and view other hydrogen energy products.

75 FR 25323 - Light-Duty Vehicle Greenhouse Gas Emission Standards and Corporate Average Fuel Economy Standards...

Science.gov (United States)

2010-05-07

... Greenhouse Gas Emission Standards and Corporate Average Fuel Economy Standards; Final Rule #0;#0;Federal... Fuel Economy Standards; Final Rule AGENCY: Environmental Protection Agency (EPA) and National Highway... reduce greenhouse gas emissions and improve fuel economy. This joint Final Rule is consistent with the...

U.S. National Committee proposed revision to the ISO Laser Damage Standard

Science.gov (United States)

Arenberg, Jonathan W.; Howland, Donna; Thomas, Michael; Turner, Trey; Bellum, John; Field, Ella; Carr, C. Wren; Shaffer, Gary; Brophy, Matthew; Krisiloff, Allen

2017-11-01

This paper reports on the fundamental idea behind a US National Committee, The Optics and Electro-Optics Standards Council (OEOSC) Task Force (TF) 7, proposal for a so-called Type 1 laser damage test procedure. A Type 1 test is designed to give a simple binary, pass or fail, result. Such tests are intended for the transactional type of damage testing typical of acceptance and quality control testing. As such is it intended for bulk of certification of optics for the ability to survive a given fluence, useful for manufacturers of optics and their customers, the system builders. At the root of the proposed method is the probability that an optic of area A will have R or less damage occurrences with a user specified probability P at test fluence Φ. This assessment is made by a survey of area and the observation of n events. The paper presents the derivation of probability of N or less damage sites on A given n events observed in area a. The paper concludes with the remaining steps to development of a useful test procedure based on the idea presented.

International collaborative study for the calibration of proposed International Standards for thromboplastin, rabbit, plain, and for thromboplastin, recombinant, human, plain.

Science.gov (United States)

van den Besselaar, A M H P; Chantarangkul, V; Angeloni, F; Binder, N B; Byrne, M; Dauer, R; Gudmundsdottir, B R; Jespersen, J; Kitchen, S; Legnani, C; Lindahl, T L; Manning, R A; Martinuzzo, M; Panes, O; Pengo, V; Riddell, A; Subramanian, S; Szederjesi, A; Tantanate, C; Herbel, P; Tripodi, A

2018-01-01

Essentials Two candidate International Standards for thromboplastin (coded RBT/16 and rTF/16) are proposed. International Sensitivity Index (ISI) of proposed standards was assessed in a 20-centre study. The mean ISI for RBT/16 was 1.21 with a between-centre coefficient of variation of 4.6%. The mean ISI for rTF/16 was 1.11 with a between-centre coefficient of variation of 5.7%. Background The availability of International Standards for thromboplastin is essential for the calibration of routine reagents and hence the calculation of the International Normalized Ratio (INR). Stocks of the current Fourth International Standards are running low. Candidate replacement materials have been prepared. This article describes the calibration of the proposed Fifth International Standards for thromboplastin, rabbit, plain (coded RBT/16) and for thromboplastin, recombinant, human, plain (coded rTF/16). Methods An international collaborative study was carried out for the assignment of International Sensitivity Indexes (ISIs) to the candidate materials, according to the World Health Organization (WHO) guidelines for thromboplastins and plasma used to control oral anticoagulant therapy with vitamin K antagonists. Results Results were obtained from 20 laboratories. In several cases, deviations from the ISI calibration model were observed, but the average INR deviation attributabled to the model was not greater than 10%. Only valid ISI assessments were used to calculate the mean ISI for each candidate. The mean ISI for RBT/16 was 1.21 (between-laboratory coefficient of variation [CV]: 4.6%), and the mean ISI for rTF/16 was 1.11 (between-laboratory CV: 5.7%). Conclusions The between-laboratory variation of the ISI for candidate material RBT/16 was similar to that of the Fourth International Standard (RBT/05), and the between-laboratory variation of the ISI for candidate material rTF/16 was slightly higher than that of the Fourth International Standard (rTF/09). The candidate materials

Search for beyond standard model physics (non-SUSY) in final states with photons at the Tevatron

Energy Technology Data Exchange (ETDEWEB)

Palencia, Jose Enrique; /Fermilab

2009-01-01

We present the results of searches for non-standard model phenomena in photon final states. These searches use data from integrated luminosities of {approx} 1-4 fb{sup -1} of p{bar p} collisions at {radical}s = 1.96 TeV, collected with the CDF and D0 detectors at the Fermilab Tevatron. No significant excess in data has been observed. We report limits on the parameters of several BSM models (excluding SUSY) for events containing photons.

Proposals for the Radioactive Substances (Basic Safety Standards) (England and Wales) Regulations 2000 and the Radioactive Substances (Basic Safety Standards) (England and Wales) Direction 2000. Consultative document

International Nuclear Information System (INIS)

2000-01-01

This document contains proposals for changes to the Radioactive Substances Act 1993 (RSA 93) and proposals for a Direction to be given to the Environment Agency in order to implement aspects of the European Directive 96/29/Euratom concerned with the control of radioactive waste. The Directive lays down basic safety standards for the protection of the health of workers and the general public against the dangers arising from ionising radiation. With the Government pledged to making government more accessible and responsive, an important feature of this approach is effective consultation with all interested organisations. This leads to more realistic and robust proposals, which is particularly important when dealing with proposed legislation. In March this year, the Government published a consultation paper 'The Radioactive Substances Act 1993: Implementing the Revised Basic Safety Standards Directive Euratom 96/29.' This sought comments on the basic principles for change - including the setting of levels of radioactivity below which radioactive material should be considered outside the framework of regulatory control. This document forms the second stage of the consultation process with the aim of gathering views on the proposed legal instruments to implement the Directive. This document: explains the background to the proposed regulations (paragraphs 8-13); summarises the results of the consultation on principles (paragraphs 14-24); describes the proposed changes (paragraphs 25-36); includes draft Regulations (paragraphs 27-29); includes a draft Direction to the Environment Agency (paragraphs 30-36); describes the next steps (paragraphs 37-39); includes a draft Regulatory Impact Assessment (paragraphs 40-41). In general, the devolved administrations in Scotland, Wales and Northern Ireland have assumed responsibility for environmental issues and hence management of radioactive waste policies and legislation affecting their respective countries. However, this

The science behind the proposed maturity standard change

Science.gov (United States)

The current maturity standard for navel oranges in California has been in place for nearly 100 years yet does not always do a good job of ensuring that consumers obtain good-tasting fruit during the early season. Early work that was performed which supported adoption of the standard may have been ad...

Piping benchmark problems for the Westinghouse AP600 Standardized Plant

International Nuclear Information System (INIS)

Bezler, P.; DeGrassi, G.; Braverman, J.; Wang, Y.K.

1997-01-01

To satisfy the need for verification of the computer programs and modeling techniques that will be used to perform the final piping analyses for the Westinghouse AP600 Standardized Plant, three benchmark problems were developed. The problems are representative piping systems subjected to representative dynamic loads with solutions developed using the methods being proposed for analysis for the AP600 standard design. It will be required that the combined license licensees demonstrate that their solutions to these problems are in agreement with the benchmark problem set

Final Report. An Integrated Partnership to Create and Lead the Solar Codes and Standards Working Group

Energy Technology Data Exchange (ETDEWEB)

Rosenthal, Andrew [New Mexico State Univ., Las Cruces, NM (United States)

2013-12-30

The DOE grant, “An Integrated Partnership to Create and Lead the Solar Codes and Standards Working Group,” to New Mexico State University created the Solar America Board for Codes and Standards (Solar ABCs). From 2007 – 2013 with funding from this grant, Solar ABCs identified current issues, established a dialogue among key stakeholders, and catalyzed appropriate activities to support the development of codes and standards that facilitated the installation of high quality, safe photovoltaic systems. Solar ABCs brought the following resources to the PV stakeholder community; Formal coordination in the planning or revision of interrelated codes and standards removing “stove pipes” that have only roofing experts working on roofing codes, PV experts on PV codes, fire enforcement experts working on fire codes, etc.; A conduit through which all interested stakeholders were able to see the steps being taken in the development or modification of codes and standards and participate directly in the processes; A central clearing house for new documents, standards, proposed standards, analytical studies, and recommendations of best practices available to the PV community; A forum of experts that invites and welcomes all interested parties into the process of performing studies, evaluating results, and building consensus on standards and code-related topics that affect all aspects of the market; and A biennial gap analysis to formally survey the PV community to identify needs that are unmet and inhibiting the market and necessary technical developments.

Final Report

Energy Technology Data Exchange (ETDEWEB)

Gurney, Kevin R. [Arizona Univ., Mesa, AZ (United States)

2015-01-12

This document constitutes the final report under DOE grant DE-FG-08ER64649. The organization of this document is as follows: first, I will review the original scope of the proposed research. Second, I will present the current draft of a paper nearing submission to Nature Climate Change on the initial results of this funded effort. Finally, I will present the last phase of the research under this grant which has supported a Ph.D. student. To that end, I will present the graduate student’s proposed research, a portion of which is completed and reflected in the paper nearing submission. This final work phase will be completed in the next 12 months. This final workphase will likely result in 1-2 additional publications and we consider the results (as exemplified by the current paper) high quality. The continuing results will acknowledge the funding provided by DOE grant DE-FG-08ER64649.

Air Emissions Damages from Municipal Drinking Water Treatment Under Current and Proposed Regulatory Standards.

Science.gov (United States)

Gingerich, Daniel B; Mauter, Meagan S

2017-09-19

Water treatment processes present intersectoral and cross-media risk trade-offs that are not presently considered in Safe Drinking Water Act regulatory analyses. This paper develops a method for assessing the air emission implications of common municipal water treatment processes used to comply with recently promulgated and proposed regulatory standards, including concentration limits for, lead and copper, disinfection byproducts, chromium(VI), strontium, and PFOA/PFOS. Life-cycle models of electricity and chemical consumption for individual drinking water unit processes are used to estimate embedded NO x , SO 2 , PM 2.5 , and CO 2 emissions on a cubic meter basis. We estimate air emission damages from currently installed treatment processes at U.S. drinking water facilities to be on the order of $500 million USD annually. Fully complying with six promulgated and proposed rules would increase baseline air emission damages by approximately 50%, with three-quarters of these damages originating from chemical manufacturing. Despite the magnitude of these air emission damages, the net benefit of currently implemented rules remains positive. For some proposed rules, however, the promise of net benefits remains contingent on technology choice.

Current situation of International Organization for Standardization/Technical Committee 249 international standards of traditional Chinese medicine.

Science.gov (United States)

Liu, Yu-Qi; Wang, Yue-Xi; Shi, Nan-Nan; Han, Xue-Jie; Lu, Ai-Ping

2017-05-01

To review the current situation and progress of traditional Chinese medicine (TCM) international standards, standard projects and proposals in International Organization for Standardization (ISO)/ technical committee (TC) 249. ISO/TC 249 standards and standard projects on the ISO website were searched and new standard proposals information were collected from ISO/TC 249 National Mirror Committee in China. Then all the available data were summarized in 5 closely related items, including proposed time, proposed country, assigned working group (WG), current stage and classifification. In ISO/TC 249, there were 2 international standards, 18 standard projects and 24 new standard proposals proposed in 2014. These 44 standard subjects increased year by year since 2011. Twenty-nine of them were proposed by China, 15 were assigned to WG 4, 36 were in preliminary and preparatory stage and 8 were categorized into 4 fifields, 7 groups and sub-groups based on International Classifification Standards. A rapid and steady development of international standardization in TCM can be observed in ISO/TC 249.

Three proposals to increase Australia's organ supply.

Science.gov (United States)

Isdale, William; Savulescu, Julian

2015-01-01

In 2008 the Australian Government introduced a national reform agenda to increase organ and tissue donation. Australia continues to perform poorly by international standards on measures of organ procurement, however. This paper outlines three proposals to improve donation rates and considers the empirical evidence available for each. A number of ethical objections frequently given to resist such proposals are also addressed. Firstly, it is recommended that Australia implement an 'opt-out' system of organ donation. Secondly, the existing veto rules should be changed to better protect the wishes of those who wish to donate. Finally, a numer of incentives should be offered to increase donation rates; these could include incentives of financial value, but also non-financial incentives such as prioritisation for the receipt of organs for previous donors.

Effects of the proposed EPA groundwater standards on the Uranium Mill Tailings Remedial Action Project

International Nuclear Information System (INIS)

Titus, F.B.

1988-01-01

Potential groundwater contamination beneath the 24 tailings piles that are to be stabilized under the UMTRA Project was intended in early project plans to be minimized by placing disposal piles over thick stratigraphic sequences of tight (minimally permeable) formations, and by designing covers that contained low permeability soil/clay infiltration barriers. The court-ordered revision of the UMTRA groundwater standards by EPA (proposed standards of September 1987) include very low Maximum Concentration Limits (MCLs), which are based mostly on Primary Drinking Water Standards. EPA also mandates that the designs should control radioactivity and hazardous constituents...for up to one thousand years, to the extends reasonably achievable, and, in any case, for at least two hundred years.... In order to accommodate this stipulation, transport modeling of water and contaminants in both the vadose and saturated zones beneath the piles is run until steady state conditions are reached. The early decision to locate stabilized piles over tight formations now exacerbates the problem of complying with the standards, since the contaminants percolate to groundwater that moves only slowly through strata having low permeabilities. Innovative solutions have been evaluated that are aimed at further minimizing long-term infiltration, geochemically fixing contaminants in place before they reach groundwater, or otherwise minimizing contaminant flux

UMTRA Project remedial action planning and disposal cell design to comply with the proposed EPA [Environmental Protection Agency] standards (40 CFR Part 192)

International Nuclear Information System (INIS)

1989-01-01

The Uranium Mill Tailings Remedial Action (UMTRA) Project involves stabilizing 24 inactive uranium mill tailings piles in 10 states. Remedial work must meet standards established by the US Environmental Protection Agency (EPA). Remedial action must be designed and constructed to prevent dispersion of the tailings and other contaminated materials, and must prevent the inadvertent use of the tailings by man. This report is prepared primarily for distribution to parties involved in the UMTRA Project, including the US Nuclear Regulatory Commission (NRC), and states and tribes. It is intended to record the work done by the DOE since publication of the proposed EPA groundwater protection standards, and to show how the DOE has attempted to respond and react in a positive way to the new requirements that result from the proposed standards. This report discusses the groundwater compliance strategies now being defined and implemented by the DOE, and details the changes in disposal cell designs that result from studies to evaluate ways to facilitate compliance with the proposed EPA groundwater protection standards. This report also serves to record the technical advances, planning, and progress made on the UMTRA Project since the appearance of the proposed EPA groundwater protection standards. The report serves to establish, document, and disseminate technical approaches and engineering and groundwater information to people who may be interested or involved in similar or related projects. 24 refs., 27 figs., 8 tabs

Search for Higgs Boson of Minimal Standard Model in the hadronic final states with the detector ALEPH at LEP 2; Recherche du boson de Higgs du Modele Standard Minimal dans les etats finals hadroniques avec le detecteur ALEPH a LEP 2

Energy Technology Data Exchange (ETDEWEB)

Deschamps, Olivier [Lab. de Physique Corpusculaire, Clermont-Ferrand-2 Univ., 63 - Aubiere (France)

1999-04-16

In the Standard Model framework of the particle physics the mass of fermions and electroweak gauge boson mass is related to a scalar sector. In the Minimal Version of the Standard Model, a neutral scalar particle is predicted: the Higgs boson. Its mass is a free parameter of the model. The search for this boson has been actively performed at the LEP collider and it has been extended by the recent increase of its energy (LEP 2). In addition, due to the increase of the signal to background ratio at LEP 2, the data analysis has been extended to new channels. This is particularly the case of the dominant, HZ {yields} hadrons, channel leading to 65% of the e{sup +}e{sup -} {yields} HZ production process final states at LEP. The aim of the work presented in this document, is the search of the Minimal Standard Model Higgs boson in the fully hadronic final state data recorded by the ALEPH detector at LEP 2 energies. A selection tool based on an artificial neural network multi-variate method, has been developed in order to separate the signal process from known Standard Model background processes. The neural network method allows to combine non-linearly the information describing the signal, and to reach performances better than those obtained by classical method based on cuts. No evidence of signal has been seen in the data collected by ALEPH up to {radical}s = 189 GeV. Thirty-two candidates has been selected in agreement with the 26.3 events expected for the background processes. Combining all channels from Higgs boson search, the limit m{sub H} > 90.2 GeV/c{sup 2} is obtained with a 95% confidence level. (author)

Radiation-protection standards and waste management

International Nuclear Information System (INIS)

Rowe, W.D.

1976-01-01

This paper reviews some of the difficult questions to be addressed in the development of fundamental environmental criteria and standards for radioactive waste management. A short discussion is included of the need to develop more precise definitions of terminology, better conceptualization of long-term problems, and new concepts to express risks from waste management and to evaluate the ability of proposed technical alternatives to control such risks. EPA's plans to develop fundamental environmental criteria and generally applicable environmental radiation-protection standards for waste disposal are summarized. Finally, the principal projects in EPA's planned near-future programs are reviewed in the areas of high-level waste, transuranic solid waste, low-level waste, residual decommissioning waste, ocean disposal, and wastes containing natural radioactivity

Tests of the Standard Model with Multi boson final states at the ATLAS Detector

CERN Document Server

Gonella, Giulia; The ATLAS collaboration

2018-01-01

Measurements of the cross sections of the production of pairs of electroweak gauge bosons at the LHC constitute stringent tests of the electroweak sector of the Standard Model and provide a model- independent means to search for new physics at the TeV scale. The ATLAS collaboration has performed detailed measurements of integrated and differential cross sections of the production of heavy di-boson pairs in fully-leptonic and semi-leptonic final states at centre-of-mass energies of 13 TeV. The results are compared to predictions and provide constraints on new physics, by setting limits on anomalous triple gauge couplings. Some analyses in this area will be reviewed and their main results summarised.

International Standard Problem 40 - Aerosol Deposition and Resuspension. Final Comparison Report

International Nuclear Information System (INIS)

De Los Reyes, Alfredo Castelo; Areia Capitao, Joaquim; De Santi, Giovanni

1999-02-01

-October 1997 and the deadline for submission of the results of this second phase was the end of January 1998. A first draft of this comparison report was produced in March 1998, followed by a workshop in Ispra in mid-March. Two errors in the supplied data had been detected and were communicated to the participants in this workshop, one concerning the steam flow rate in the deposition phase of the exercise and the other the size distribution of the resuspended aerosols in the resuspension phase. The decision whether or not to re-do their calculations was left to the each ISP participant and the deadline for the submission of new results, with these or other modifications relative to the previous ones, was the end of May 1998. These new calculations, having been performed in open conditions, are presented separately in this report. The final draft of the comparison report was distribute in June 1998, followed by a final workshop in Ispra the same month. This report is divided into six main sections, one concerning the experimental set-up and results, two each for the deposition and resuspension phases of the International Standard Problem (blind and open calculations), and one on general conclusions and recommendations. According to the opinion of the ISP participants, the results in the two sections on the deposition and resuspension exercises are listed by computer code and, for each code, by organisation. The calculations submitted by the Joint Research Centre are included together with the others. Although the JRC staff who performed the calculations did not have access to the experimental results before submitting their results, their knowledge of the facility puts their calculations in a separate class

Survey of standards for electronic image displays

Science.gov (United States)

Rowe, William A.

1996-02-01

Electronic visual displays have been evolving from the 1960's basis of cathode ray tube (CRT) technology. Now, many other technologies are also available, including both flat panels and projection displays. Standards for these displays are being developed at both the national level and the international levels. Standards activity within the United States is in its infancy and is fragmented according to the inclination of each of the standards developing organizations. The latest round of flat panel display technology was primarily developed in Japan. Initially standards arose from component vendor-to-OEM customer relationships. As a result, Japanese standards for components are the best developed. The Electronics Industries Association of Japan (EIAJ) is providing their standards to the International Electrotechnical Commission (IEC) for adoption. On the international level, professional societies such as the human factors society (hfs) and the International Organization for Standardization (ISO) have completed major standards, hfs developed the first ergonomic standard hfs-100 and the ISO has developed some sections of a broader ergonomic standard ISO 9241. This paper addresses the organization of standards activity. Active organizations and their areas of focus are identified. The major standards that have been completed or are in development are described. Finally, suggestions for improving the this standards activity are proposed.

Closing the gap: accelerating the translational process in nanomedicine by proposing standardized characterization techniques.

Science.gov (United States)

Khorasani, Ali A; Weaver, James L; Salvador-Morales, Carolina

2014-01-01

On the cusp of widespread permeation of nanomedicine, academia, industry, and government have invested substantial financial resources in developing new ways to better treat diseases. Materials have unique physical and chemical properties at the nanoscale compared with their bulk or small-molecule analogs. These unique properties have been greatly advantageous in providing innovative solutions for medical treatments at the bench level. However, nanomedicine research has not yet fully permeated the clinical setting because of several limitations. Among these limitations are the lack of universal standards for characterizing nanomaterials and the limited knowledge that we possess regarding the interactions between nanomaterials and biological entities such as proteins. In this review, we report on recent developments in the characterization of nanomaterials as well as the newest information about the interactions between nanomaterials and proteins in the human body. We propose a standard set of techniques for universal characterization of nanomaterials. We also address relevant regulatory issues involved in the translational process for the development of drug molecules and drug delivery systems. Adherence and refinement of a universal standard in nanomaterial characterization as well as the acquisition of a deeper understanding of nanomaterials and proteins will likely accelerate the use of nanomedicine in common practice to a great extent.

78 FR 66642 - Updating OSHA Standards Based on National Consensus Standards; Signage

Science.gov (United States)

2013-11-06

...; Signage AGENCY: Occupational Safety and Health Administration (OSHA), Department of Labor. ACTION: Final... (78 FR 35559) a direct final rule that revised its signage standards for general industry and... revised its signage standards for general industry at 29 CFR 1910.97, 1910.145, and 1910.261, and...

Total System Performance Assessment Sensitivity Analyses for Final Nuclear Regulatory Commission Regulations

International Nuclear Information System (INIS)

Bechtel SAIC Company

2001-01-01

This Letter Report presents the results of supplemental evaluations and analyses designed to assess long-term performance of the potential repository at Yucca Mountain. The evaluations were developed in the context of the Nuclear Regulatory Commission (NRC) final public regulation, or rule, 10 CFR Part 63 (66 FR 55732 [DIRS 156671]), which was issued on November 2, 2001. This Letter Report addresses the issues identified in the Department of Energy (DOE) technical direction letter dated October 2, 2001 (Adams 2001 [DIRS 156708]). The main objective of this Letter Report is to evaluate performance of the potential Yucca Mountain repository using assumptions consistent with performance-assessment-related provisions of 10 CFR Part 63. The incorporation of the final Environmental Protection Agency (EPA) standard, 40 CFR Part 197 (66 FR 32074 [DIRS 155216]), and the analysis of the effect of the 40 CFR Part 197 EPA final rule on long-term repository performance are presented in the Total System Performance Assessment--Analyses for Disposal of Commercial and DOE Waste Inventories at Yucca Mountain--Input to Final Environmental Impact Statement and Site Suitability Evaluation (BSC 2001 [DIRS 156460]), referred to hereafter as the FEIS/SSE Letter Report. The Total System Performance Assessment (TSPA) analyses conducted and documented prior to promulgation of the NRC final rule 10 CFR Part 63 (66 FR 55732 [DIRS 156671]), were based on the NRC proposed rule (64 FR 8640 [DIRS 101680]). Slight differences exist between the NRC's proposed and final rules which were not within the scope of the FEIS/SSE Letter Report (BSC 2001 [DIRS 156460]), the Preliminary Site Suitability Evaluation (PSSE) (DOE 2001 [DIRS 155743]), and supporting documents for these reports. These differences include (1) the possible treatment of ''unlikely'' features, events and processes (FEPs) in evaluation of both the groundwater protection standard and the human-intrusion scenario of the individual

Proposal of building a standard geodatabase for urban land use

Directory of Open Access Journals (Sweden)

Husein Haifaa

2018-01-01

Full Text Available The digital technologies represented by digital processing programs, local data bases and satellite receivers system is a set of technologies made to organize the process of building descriptive field database, and conveying them to computers, in order to store, analyze and manifest data as well as upgrade and extract it in the form of digital maps, which represent an asset in any engineering and planning study. For a variety of types of mixed land uses and others land uses in the urban city, which cause great difficulty in how to build spatial Geodatabase in terms of frequency of the land use and overlap between land uses, the paper will find the proposed standard Geomatics techniques to get rid of these difficulties. The paper will tackle the engineering and survey methods which could reinforce manifestation of uses of logical database in urban areas. Lastly, the research concludes that relying on important field survey and digital references in preparing suggested criteria for field uses, in addition to the recommendations provided in this field for the post graduate and undergraduate students as well governmental specialized departments.

Standard compensation for power cuts. Working group report

International Nuclear Information System (INIS)

2002-07-01

The Working Group was commissioned to draw up a proposal in the form of a Government Bill for provisions to be included in the Electricity Market Act on imposing an obligation on the distribution net operator to pay a standard compensation to the users of electricity for the event that they get no access to electricity. The Working Group should consider especially a model of standard compensation presented in the final report by Mr. Jarl Forsten, Deputy Director General of the Technical Research Centre of Finland VTT, published on 30 April 2002 that the amount of standard compensation should not depend on the reason for the power cut. The Working Group proposes that the Electricity Market Act should be amended by provisions providing that a distribution net operator shall pay to the user of electricity a standard compensation for power cuts lasting over 12 hours. The amount of compensation shall be based on the annual network service fee and a sliding scale of compensation related to the duration of the power cut shall be applied. The maximum compensation shall be paid when the power cut lasts more than five days. The maximum amount of individual compensations shall be fixed at EUR 700. The proposed provisions on standard compensation in the event of power cuts are aimed at amending the provisions in Chapter 6a of the Electricity Market Act on price reduction and compensation because of fault in the supply of electricity. The aim of the introduction of standard compensation for power cuts is to persuade distribution net operators to make an effort to minimize the time for power cuts. (orig.)

Simulation of Silver Thin Films' Growth and Influence of Deposition Rate on Final Grain Size under Angle Flux and Standard Situation

Directory of Open Access Journals (Sweden)

Maryam Jamshidnejad

2011-01-01

Full Text Available In this paper, a 2D stimulation model, FACET, is used for investigation of the relation between micro structure and deposition conditions such as substrate temperature, deposition rate and deposition angle of Ag thin films. It is observed that by increasing the deposition rate in standard conditions providing that the temperature of substrate is low, the average of final grain size is decreased. While, in deposition with angle flux the average of final grain size is increased.

Modern proposal of methodology for retrieval of characteristic synthetic rainfall hyetographs

Science.gov (United States)

Licznar, Paweł; Burszta-Adamiak, Ewa; Łomotowski, Janusz; Stańczyk, Justyna

2017-11-01

Modern engineering workshop of designing and modelling complex drainage systems is based on hydrodynamic modelling and has a probabilistic character. Its practical application requires a change regarding rainfall models accepted at the input. Previously used artificial rainfall models of simplified form, e.g. block precipitation or Euler's type II model rainfall are no longer sufficient. It is noticeable that urgent clarification is needed as regards the methodology of standardized rainfall hyetographs that would take into consideration the specifics of local storm rainfall temporal dynamics. The aim of the paper is to present a proposal for innovative methodology for determining standardized rainfall hyetographs, based on statistical processing of the collection of actual local precipitation characteristics. Proposed methodology is based on the classification of standardized rainfall hyetographs with the use of cluster analysis. Its application is presented on the example of selected rain gauges localized in Poland. Synthetic rainfall hyetographs achieved as a final result may be used for hydrodynamic modelling of sewerage systems, including probabilistic detection of necessary capacity of retention reservoirs.

Quantifying relative importance: Computing standardized effects in models with binary outcomes

Science.gov (United States)

Grace, James B.; Johnson, Darren; Lefcheck, Jonathan S.; Byrnes, Jarrett E.K.

2018-01-01

Scientists commonly ask questions about the relative importances of processes, and then turn to statistical models for answers. Standardized coefficients are typically used in such situations, with the goal being to compare effects on a common scale. Traditional approaches to obtaining standardized coefficients were developed with idealized Gaussian variables in mind. When responses are binary, complications arise that impact standardization methods. In this paper, we review, evaluate, and propose new methods for standardizing coefficients from models that contain binary outcomes. We first consider the interpretability of unstandardized coefficients and then examine two main approaches to standardization. One approach, which we refer to as the Latent-Theoretical or LT method, assumes that underlying binary observations there exists a latent, continuous propensity linearly related to the coefficients. A second approach, which we refer to as the Observed-Empirical or OE method, assumes responses are purely discrete and estimates error variance empirically via reference to a classical R2 estimator. We also evaluate the standard formula for calculating standardized coefficients based on standard deviations. Criticisms of this practice have been persistent, leading us to propose an alternative formula that is based on user-defined “relevant ranges”. Finally, we implement all of the above in an open-source package for the statistical software R.

Position paper on standardization

International Nuclear Information System (INIS)

1991-04-01

The ''NPOC Strategic Plan for Building New Nuclear Plants'' creates a framework within which new standardized nuclear plants may be built. The Strategic Plan is an expression of the nuclear energy industry's serious intent to create the necessary conditions for new plant construction and operation. One of the key elements of the Strategic Plan is a comprehensive industry commitment to standardization: through design certification, combined license, first-of-a-kind engineering, construction, operation and maintenance of nuclear power plants. The NPOC plan proposes four stages of standardization in advanced light water reactors (ALWRs). The first stage is established by the ALWR Utility Requirements Document which specifies owner/operator requirements at a functional level covering all elements of plant design and construction, and many aspects of operations and maintenance. The second stage of standardization is that achieved in the NRC design certification. This certification level includes requirements, design criteria and bases, functional descriptions and performance requirements for systems to assure plant safety. The third stage of standardization, commercial standardization, carries the design to a level of completion beyond that required for design certification to enable the industry to achieve potential increases in efficiency and economy. The final stage of standardization is enhanced standardization beyond design. A standardized approach is being developed in construction practices, operating, maintenance training, and procurement practices. This comprehensive standardization program enables the NRC to proceed with design certification with the confidence that standardization beyond the regulations will be achieved. This confidence should answer the question of design detail required for design certification, and demonstrate that the NRC should require no further regulatory review beyond that required by 10 CFR Part 52

Proposed quality control guidelines for National Committee for Clinical Laboratory Standards Susceptibility Tests using the veterinary antimicrobial agent tiamulin.

Science.gov (United States)

Pfaller, M A; Jones, R N; Walter, D H

2001-01-01

Quality control guidelines for standardized antimicrobial susceptibility test methods are critical for the continuing accuracy of these clinical tests. In this report, quality control limits were proposed for the veterinary antimicrobial agent tiamulin with minimum inhibitory concentration (MIC) ranges of three or four log(2) dilution steps in two different medium formulations. Disk diffusion zone diameter ranges were proposed for tiamulin tested against Actinobacillus pleuropneumoniae ATCC 27090 (12-18 mm) and Staphylococcus aureus ATCC 25923 (25-32 mm). The data from eight participating laboratories produced 100% of results within proposed MIC limits (8-32 microg/mL), and 95.8-97.0% of zones were found within suggested zone diameter QC guidelines. These proposed QC ranges should be validated by in-use results from veterinary clinical laboratories.

A search for beyond the Standard Model physics using a final state with light and boosted muon pairs at CMS experiment

CERN Document Server

Castaneda Hernandez, Alfredo Martin

2017-01-01

A search for new physics phenomena is presented using a final state with multi-muons, the topology studied considers pairs of opposite sign muons (dimuons) with a low invariant mass and potentially produced far from the interaction point (displaced). Several beyond the Standard Model scenarios fit into this category, including those predicting Dark matter particles (i.e. dark photons) which weakly interact with SM particles via a kinetic mixing parameter and could have a non-negligible lifetime. Other scenario is the Next-to-Minimal Supersymmetric Standard Model (NMSSM) that extends the higgs sector introducing new light bosons that can decay to muon pairs. The data analyzed corresponds to the one collected by CMS experiment during 2015 using 13 TeV collision energy. This search constrains a large, previously unconstrained area of the parameter space for each mode and allows for an easy reinterpretation for new physics models with similar final state.

77 FR 555 - National Emissions Standards for Hazardous Air Pollutants From Secondary Lead Smelting

Science.gov (United States)

2012-01-05

... 331492 0205 \\a\\ North American Industry Classification System. \\b\\ Maximum Achievable Control Technology... protective. NRDC v. EPA, 529 F.3d 1077, 1083 (DC Cir. 2008). On May 19, 2011, the EPA published a proposed... dioxin formation. Finalizing work practice standards for mercury. Revising the requirements in the NESHAP...

Proposed Rule and Related Materials for Control of Emissions of Air Pollution From Nonroad Diesel Engines Control of Air Pollution From Aircraft and Aircraft Engines; Proposed Emission Standards and Test Procedures

Science.gov (United States)

EPA is proposing to adopt emission standards and related provisions for aircraft gas turbine engines with rated thrusts greater than 26.7 kilonewtons. These engines are used primarily on commercial passenger and freight aircraft.

Multi-focus image fusion based on area-based standard deviation in dual tree contourlet transform domain

Science.gov (United States)

Dong, Min; Dong, Chenghui; Guo, Miao; Wang, Zhe; Mu, Xiaomin

2018-04-01

Multiresolution-based methods, such as wavelet and Contourlet are usually used to image fusion. This work presents a new image fusion frame-work by utilizing area-based standard deviation in dual tree Contourlet trans-form domain. Firstly, the pre-registered source images are decomposed with dual tree Contourlet transform; low-pass and high-pass coefficients are obtained. Then, the low-pass bands are fused with weighted average based on area standard deviation rather than the simple "averaging" rule. While the high-pass bands are merged with the "max-absolute' fusion rule. Finally, the modified low-pass and high-pass coefficients are used to reconstruct the final fused image. The major advantage of the proposed fusion method over conventional fusion is the approximately shift invariance and multidirectional selectivity of dual tree Contourlet transform. The proposed method is compared with wavelet- , Contourletbased methods and other the state-of-the art methods on common used multi focus images. Experiments demonstrate that the proposed fusion framework is feasible and effective, and it performs better in both subjective and objective evaluation.

International Standardization of the Clinical Dosimetry of Beta Radiation Brachytherapy Sources: Progress of an ISO Standard

Science.gov (United States)

Soares, Christopher

2006-03-01

In 2004 a new work item proposal (NWIP) was accepted by the International Organization for Standardization (ISO) Technical Committee 85 (TC85 -- Nuclear Energy), Subcommittee 2 (Radiation Protection) for the development of a standard for the clinical dosimetry of beta radiation sources used for brachytherapy. To develop this standard, a new Working Group (WG 22 - Ionizing Radiation Dosimetry and Protocols in Medical Applications) was formed. The standard is based on the work of an ad-hoc working group initiated by the Dosimetry task group of the Deutsches Insitiut für Normung (DIN). Initially the work was geared mainly towards the needs of intravascular brachytherapy, but with the decline of this application, more focus has been placed on the challenges of accurate dosimetry for the concave eye plaques used to treat ocular melanoma. Guidance is given for dosimetry formalisms, reference data to be used, calibrations, measurement methods, modeling, uncertainty determinations, treatment planning and reporting, and clinical quality control. The document is currently undergoing review by the ISO member bodies for acceptance as a Committee Draft (CD) with publication of the final standard expected by 2007. There are opportunities for other ISO standards for medical dosimetry within the framework of WG22.

International collaborative study for the calibration of proposed International Standards for thromboplastin, rabbit, plain and for thromboplastin, recombinant, human, plain

DEFF Research Database (Denmark)

van den Besselaar, A M H P; Chantarangkul, V; Angeloni, F

2018-01-01

BACKGROUND: The availability of International Standards for thromboplastin is essential for the calibration of routine reagents and hence the calculation of the International Normalized Ratio (INR). Stocks of the current 4(th) International Standards are running low. Candidate replacement materia......) international standard (rTF/09). The candidate materials have been accepted by WHO as the 5(th) International Standards for thromboplastin, rabbit plain, and thromboplastin, recombinant, human, plain. This article is protected by copyright. All rights reserved.......BACKGROUND: The availability of International Standards for thromboplastin is essential for the calibration of routine reagents and hence the calculation of the International Normalized Ratio (INR). Stocks of the current 4(th) International Standards are running low. Candidate replacement materials...... have been prepared. This report describes the calibration of the proposed 5(th) International Standards for thromboplastin, rabbit, plain (coded RBT/16) and for thromboplastin, recombinant, human, plain (coded rTF/16). METHODS: An international collaborative study was carried out for the assignment...

Fluorescent standards for photodynamic therapy

Science.gov (United States)

Belko, N.; Kavalenka, S.; Samtsov, M.

2016-08-01

Photodynamic therapy is an evolving technique for treatment of various oncological diseases. This method employs photosensitizers - species that lead to death of tumor cells after the photoactivation. For further development and novel applications of photodynamic therapy new photosensitizers are required. After synthesis of a new photosensitizer it is important to know its concentration in different biological tissues after its administration and distribution. The concentration is frequently measured by the extraction method, which has some disadvantages, e.g. it requires many biological test subjects that are euthanized during the measurement. We propose to measure the photosensitizer concentration in tissue by its fluorescence. For this purpose fluorescent standards were developed. The standards are robust and simple to produce; their fluorescence signal does not change with time. The fluorescence intensity of fluorescent standards seems to depend linearly on the dye concentration. A set of standards thus allow the calibration of a spectrometer. Finally, the photosensitizer concentration can be determined by the fluorescence intensity after comparing the corresponding spectrum with spectra of the set of fluorescent standards. A biological test subject is not euthanized during this kind of experiment. We hope this more humane technique can be used in future instead of the extraction method.

Fact Sheets and Questions and Answers for the Final Air Toxics Rules for the Aerospace Manufacturing and Rework Industry

Science.gov (United States)

This page contains the July 1995 final rule fact sheet and the January 2015 proposed rule fact sheet that contains information on the National Emission Standards for Aerospace Manufacturing and Rework Facilities, as well as a 2001 Q&A document on the rule

Good practices in virtual higher education based on specifications for e-Learning standards

Directory of Open Access Journals (Sweden)

Edgar Javier Carmona Suarez

2017-03-01

Full Text Available Free courses, full academic programs, and partially and totally virtual universities are now offered, which shows an increase in the offer and coverage in higher education. With growth, new needs emerge from questions about the quality of education, which depends on many factors; for example, the standardization of online or virtual academic spaces. This research proposed the creation of a set of technical, administrative, communicative and pedagogical specifications to improve virtual training at the University of Quindío, which serves as a reference for good practices for university teachers. In this process, significant experiences were collected and, as a final result, a proposal was built in the light of categories created by international organizations specialized in standards. This led to standardization processes, which contribute to the strengthening of the quality of education.

Search for non-standard model signatures in the WZ/ZZ final state at CDF Run II

International Nuclear Information System (INIS)

Norman, Matthew

2009-01-01

This thesis discusses a search for non-Standard Model physics in heavy diboson production in the dilepton-dijet final state, using 1.9 fb -1 of data from the CDF Run II detector. New limits are set on the anomalous coupling parameters for ZZ and WZ production based on limiting the production cross-section at high (cflx s). Additionally limits are set on the direct decay of new physics to ZZ andWZ diboson pairs. The nature and parameters of the CDF Run II detector are discussed, as are the influences that it has on the methods of our analysis.

Search for non-standard model signatures in the WZ/ZZ final state at CDF run II

Energy Technology Data Exchange (ETDEWEB)

Norman, Matthew [Univ. of California, San Diego, CA (United States)

2009-01-01

This thesis discusses a search for non-Standard Model physics in heavy diboson production in the dilepton-dijet final state, using 1.9 fb ^-1 of data from the CDF Run II detector. New limits are set on the anomalous coupling parameters for ZZ and WZ production based on limiting the production cross-section at high š. Additionally limits are set on the direct decay of new physics to ZZ andWZ diboson pairs. The nature and parameters of the CDF Run II detector are discussed, as are the influences that it has on the methods of our analysis.

Toward a standard method for determination of waterborne radon

International Nuclear Information System (INIS)

Vitz, E.

1990-01-01

When the USEPA specifies the maximum contaminant level (MCL) for any contaminant, a standard method for analysis must be simultaneously stipulated. Promulgation of the proposed MCL and standard method for radon in drinking water is expected by early next year, but a six-month comment period and revision will precede final enactment. The standard method for radon in drinking water will probably specify that either the Lucas cell technique or liquid scintillation spectrometry be used. This paper reports results which support a standard method with the following features: samples should be collected by an explicitly stated technique to control degassing, in glass vials with or without scintillation cocktail, and possibly in duplicate; samples should be measured by liquid scintillation spectroscopy in a specified energy window', in a glass vial with particular types of cocktails; radium standards should be prepared with controlled quench levels and specified levels of carriers, but radium-free controls prepared by a specified method should be used in interlaboratory comparison studies

Proposed Expansion of German Air Force Operations at Holloman AFB, New Mexico. Final Environmental Impact Statement. Volume III: Comment Letters and Responses to Comments

National Research Council Canada - National Science Library

1998-01-01

The Final Environmental Impact Statement analyzed the potential environmental consequences from the proposal to beddown 30 additional German Air Force Tornado aircraft and 640 personnel at Holloman Air Force Base (AFB) New Mexico...

Proposal for an absolute, atomic definition of mass

International Nuclear Information System (INIS)

Wignall, J.W.G.

1991-11-01

It is proposed that the mass of a particle be defined absolutely as its de Broglie frequency, measured as the mean de Broglie wavelength of the particle when it has a mean speed (v) and Lorentz factor γ; the masses of systems too large to have a measurable de Broglie wavelength mean are then to be derived by specifying the usual inertial and additive properties of mass. This definition avoids the use of an arbitrary macroscopic standard such as the prototype kilogram, and, if present theory is correct, does not even require the choice of a specific particle as a mass standard. Suggestions are made as to how this absolute mass can be realized and measured at the macroscopic level and, finally, some comments are made on the effect of the new definition on the form of the equations of physics. 19 refs

Standards to prevent, detect, and respond to sexual abuse and sexual harassment involving unaccompanied children. Interim final rule (IFR).

Science.gov (United States)

2014-12-24

This IFR proposes standards and procedures to prevent, detect, and respond to sexual abuse and sexual harassment involving unaccompanied children (UCs) in ORR's care provider facilities. DATES: This IFR is effective on December 24, 2014. ORR care provider facilities must be in compliance with this IFR by June 24, 2015 but encourages care provider facilities to be in compliance sooner, if possible. HHS will work with facilities to implement and enforce the standards contained in this rule. Comments on this IFR must be received on or before February 23, 2015.

Proposed IMS infrastructure improvement project, Seward, Alaska. Final environmental impact statement

Energy Technology Data Exchange (ETDEWEB)

1994-09-01

This Environmental Impact Statement (EIS) examines a proposal for improvements at the existing University of Alaska, Fairbanks, Institute of Marine Science (IMS), Seward Marine Center. The Exxon Valdez Oil Spill (EVOS) Trustee Council is proposing to improve the existing research infrastructure to enhance the EVOS Trustee Council`s capabilities to study and rehabilitate marine mammals, marine birds, and the ecosystem injured by the Exxon Valdez oil spill. The analysis in this document focuses on the effects associated with construction and operation of the proposed project and its proposed alternatives. The EIS gives a detailed description of all major elements of the proposed project and its alternatives; identifies resources of major concern that were raised during the scoping process; describes the environmental background conditions of those resources; defines and analyzes the potential effects of the proposed project and its alternatives on these conditions; and identifies mitigating measures that are part of the project design as well as those proposed to minimize or reduce the adverse effects. Included in the EIS are written and oral comments received during the public comment period.

Proposed IMS infrastructure improvement project, Seward, Alaska. Final environmental impact statement

International Nuclear Information System (INIS)

1994-09-01

This Environmental Impact Statement (EIS) examines a proposal for improvements at the existing University of Alaska, Fairbanks, Institute of Marine Science (IMS), Seward Marine Center. The Exxon Valdez Oil Spill (EVOS) Trustee Council is proposing to improve the existing research infrastructure to enhance the EVOS Trustee Council's capabilities to study and rehabilitate marine mammals, marine birds, and the ecosystem injured by the Exxon Valdez oil spill. The analysis in this document focuses on the effects associated with construction and operation of the proposed project and its proposed alternatives. The EIS gives a detailed description of all major elements of the proposed project and its alternatives; identifies resources of major concern that were raised during the scoping process; describes the environmental background conditions of those resources; defines and analyzes the potential effects of the proposed project and its alternatives on these conditions; and identifies mitigating measures that are part of the project design as well as those proposed to minimize or reduce the adverse effects. Included in the EIS are written and oral comments received during the public comment period

77 FR 14416 - Notice of Availability of a Final Environmental Impact Statement and Final Environmental Impact...

Science.gov (United States)

2012-03-09

...In accordance with the National Environmental Policy Act of 1969, as amended (NEPA), and the Federal Land Policy and Management Act of 1976, as amended (FLPMA), the Bureau of Land Management (BLM) has prepared a Proposed California Desert Conservation Area (CDCA) Plan Amendment (PA)/Final Environmental Impact Statement (EIS) and Final Environmental Impact Report (EIR) for the Ocotillo Express Wind Energy Facility (OWEF) and by this notice is announcing the availability of the Proposed PA and Final EIS/EIR.

Beyond Standard Model searches in jets plus missing transverse energy final states with the ATLAS experiment at the LHC

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00414488; Alviggi, Mariagrazia; Conventi, Francesco

Dark Matter (DM) is currently one of the most challenging goal in the LHC programme: if DM exists it can be pair-produced in proton-proton collisions. Since its weakly-interacting nature, final signatures with high missing momentum and Standard Model (SM) particles are employed in these searches. This thesis presents results on signatures involving bottom quarks in final states, described in models where DM production occurs via massive spin-0 mediators (scalar or pseudoscalar) with a coupling to SM particles proportional to their masses. These collider searches provide an interesting complementarity to DM direct and indirect detection experiments, covering the parameter space with low DM masses. The results shown in the thesis are obtained on the data collected by the ATLAS experiment in 2015 and 2016.

Necessary and Sufficient Process leading to Work Smart Standards. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-11-01

The Necessary and Sufficient Process leading to Work Smart Standards is a Department of Energy initiative to assure adequate protection for workers, the public, and the environment. The Work Smart Standards initiative directs the Laboratory to develop a set of ES and H standards based on the work performed at the Laboratory and the hazards associated with the work. Berkeley Lab`s set of Work Smart Standards includes required Federal, State and local laws and, additionally, national and international standards which represent the highest operating standards of industrial and commercial institutions.

Necessary and Sufficient Process leading to Work Smart Standards. Final report

International Nuclear Information System (INIS)

1996-11-01

The Necessary and Sufficient Process leading to Work Smart Standards is a Department of Energy initiative to assure adequate protection for workers, the public, and the environment. The Work Smart Standards initiative directs the Laboratory to develop a set of ES and H standards based on the work performed at the Laboratory and the hazards associated with the work. Berkeley Lab's set of Work Smart Standards includes required Federal, State and local laws and, additionally, national and international standards which represent the highest operating standards of industrial and commercial institutions

Status analysis of Chinese standards on enclosure equipment and proposed countermeasures

International Nuclear Information System (INIS)

Wu Luping

1998-12-01

Enclosure equipment, such as glove box, tong box etc., is an important kind of equipment for nuclear industry and nuclear scientific research. The status of the establishment and implementation of Chinese standards on enclosure equipment is briefly described. Some problems and deficiency existing in these standards are pointed out. The ISO standard projects on containment enclosures as well as their present progress situations are introduced. The measure for updating Chinese standards on enclosure equipment in accordance with the principle of adopting international standards are recommended. Some issues which should be taken into account in adopting ISO standards on containment enclosures are also discussed

Comparison between predicted duct effectiveness from proposed ASHRAE Standard 152P and measured field data for residential forced air cooling systems; TOPICAL

International Nuclear Information System (INIS)

Siegel, Jeffrey A.; McWilliams, Jennifer A.; Walker, Iain S.

2002-01-01

The proposed ASHRAE Standard 152P ''Method of Test for Determining the Design and Seasonal Efficiencies of Residential Thermal Distribution Systems'' (ASHRAE 2002) has recently completed its second public review. As part of the standard development process, this study compares the forced air distribution system ratings provided by the public review draft of Standard 152P to measured field results. 58 field tests were performed on cooling systems in 11 homes in the summers of 1998 and 1999. Seven of these houses had standard attics with insulation on the attic floor and a well-vented attic space. The other four houses had unvented attics where the insulation is placed directly under the roof deck and the attic space is not deliberately vented. Each house was tested under a range of summer weather conditions at each particular site, and in some cases the amount of duct leakage was intentionally varied. The comparison between 152P predicted efficiencies and the measured results includes evaluation of the effects of weather, duct location, thermal conditions, duct leakage, and system capacity. The results showed that the difference between measured delivery effectiveness and that calculated using proposed Standard 152P is about 5 percentage points if weather data, duct leakage and air handler flow are well known. However, the accuracy of the standard is strongly dependent on having good measurements of duct leakage and system airflow. Given that the uncertainty in the measured delivery effectiveness is typically also about 5 percentage points, the Standard 152P results are acceptably close to the measured data

A new proposal for greenhouse gas emissions responsibility allocation: best available technologies approach.

Science.gov (United States)

Berzosa, Álvaro; Barandica, Jesús M; Fernández-Sánchez, Gonzalo

2014-01-01

In recent years, several methodologies have been developed for the quantification of greenhouse gas (GHG) emissions. However, determining who is responsible for these emissions is also quite challenging. The most common approach is to assign emissions to the producer (based on the Kyoto Protocol), but proposals also exist for its allocation to the consumer (based on an ecological footprint perspective) and for a hybrid approach called shared responsibility. In this study, the existing proposals and standards regarding the allocation of GHG emissions responsibilities are analyzed, focusing on their main advantages and problems. A new model of shared responsibility that overcomes some of the existing problems is also proposed. This model is based on applying the best available technologies (BATs). This new approach allocates the responsibility between the producers and the final consumers based on the real capacity of each agent to reduce emissions. The proposed approach is demonstrated using a simple case study of a 4-step life cycle of ammonia nitrate (AN) fertilizer production. The proposed model has the characteristics that the standards and publications for assignment of GHG emissions responsibilities demand. This study presents a new way to assign responsibilities that pushes all the actors in the production chain, including consumers, to reduce pollution. © 2013 SETAC.

Environmental assessment in support of proposed interim energy conservation voluntary performance standards for new non-federal residential buildings: Volume 7

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-09-01

The objective of this environmental assessment (EA) is to identify the potential environmental impacts that could result from the proposed voluntary residential standard (VOLRES) on private sector construction of new residential buildings. In this report, the scope, objectives, and approach of this EA are presented.

- LAA Occluder View for post-implantation Evaluation (LOVE) - standardized imaging proposal evaluating implanted left atrial appendage occlusion devices by cardiac computed tomography

International Nuclear Information System (INIS)

Behnes, Michael; Akin, Ibrahim; Sartorius, Benjamin; Fastner, Christian; El-Battrawy, Ibrahim; Borggrefe, Martin; Haubenreisser, Holger; Meyer, Mathias; Schoenberg, Stefan O.; Henzler, Thomas

2016-01-01

A standardized imaging proposal evaluating implanted left atrial appendage (LAA) occlusion devices by cardiac computed tomography angiography (cCTA) has never been investigated. cCTA datasets were acquired on a 3 rd generation dual-source CT system and reconstructed with a slice thickness of 0.5 mm. An interdisciplinary evaluation was performed by two interventional cardiologists and one radiologist on a 3D multi-planar workstation. A standardized multi-planar reconstruction algorithm was developed in order to assess relevant clinical aspects of implanted LAA occlusion devices being outlined within a pictorial essay. The following clinical aspects of implanted LAA occlusion devices were evaluated within the most appropriate cCTA multi-planar reconstruction: (1) topography to neighboring structures, (2) peri-device leaks, (3) coverage of LAA lobes, (4) indirect signs of neo-endothelialization. These are illustrated within concise CT imaging examples emphasizing the potential value of the proposed cCTA imaging algorithm: Starting from anatomical cCTA planes and stepwise angulation planes perpendicular to the base of the LAA devices generates an optimal LAA Occluder View for post-implantation Evaluation (LOVE). Aligned true axial, sagittal and coronal LOVE planes offer a standardized and detailed evaluation of LAA occlusion devices after percutaneous implantation. This pictorial essay presents a standardized imaging proposal by cCTA using multi-planar reconstructions that enables systematical follow-up and comparison of patients after LAA occlusion device implantation. The online version of this article (doi:10.1186/s12880-016-0127-y) contains supplementary material, which is available to authorized users

Standardization of electric projects of small hydroelectric power plants; Padronizacao de projetos eletricos de pequenas centrais hidreletricas

Energy Technology Data Exchange (ETDEWEB)

Lima, Roberth dos Santos

2002-07-01

This work presents a standardizing proposal for Electrical Projects of small hydroelectric central and it has as objective to optimize some solutions for the most cases, considering the great diversity of options. The development of the dissertation is the result of several real cases of projects of hydroelectric centrals. Besides the projects, several bibliographies about the case which is being studied were researched, taking into consideration the entire proposal presented to the respective authors and, finally, as synthesis to all observations made in that study, the presentation of an optimized solution for the job of the electrical components and a proposal for the estimate of costs of those components. The conclusions of this work present a favorable result because they offer an initial proposal for the standardizing of information considered extremely important for the carrying out of a project of hydroelectric central. (author)

Standard review plan for dry cask storage systems. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-01-01

The Standard Review Plan (SRP) For Dry Cask Storage Systems provides guidance to the Nuclear Regulatory Commission staff in the Spent Fuel Project Office for performing safety reviews of dry cask storage systems. The SRP is intended to ensure the quality and uniformity of the staff reviews, present a basis for the review scope, and clarification of the regulatory requirements. Part 72, Subpart B generally specifies the information needed in a license application for the independent storage of spent nuclear fuel and high level radioactive waste. Regulatory Guide 3.61 {open_quotes}Standard Format and Content for a Topical Safety Analysis Report for a Spent Fuel Dry Storage Cask{close_quotes} contains an outline of the specific information required by the staff. The SRP is divided into 14 sections which reflect the standard application format. Regulatory requirements, staff positions, industry codes and standards, acceptance criteria, and other information are discussed.

Standard review plan for dry cask storage systems. Final report

International Nuclear Information System (INIS)

1997-01-01

The Standard Review Plan (SRP) For Dry Cask Storage Systems provides guidance to the Nuclear Regulatory Commission staff in the Spent Fuel Project Office for performing safety reviews of dry cask storage systems. The SRP is intended to ensure the quality and uniformity of the staff reviews, present a basis for the review scope, and clarification of the regulatory requirements. Part 72, Subpart B generally specifies the information needed in a license application for the independent storage of spent nuclear fuel and high level radioactive waste. Regulatory Guide 3.61 open-quotes Standard Format and Content for a Topical Safety Analysis Report for a Spent Fuel Dry Storage Caskclose quotes contains an outline of the specific information required by the staff. The SRP is divided into 14 sections which reflect the standard application format. Regulatory requirements, staff positions, industry codes and standards, acceptance criteria, and other information are discussed

Standardization for climate change. Approaches and perspectives. Final report

International Nuclear Information System (INIS)

Weterings, R.

1995-01-01

The results of a project, aimed at support of the environmental quality target for climate policy on a national level (Follow-up Memorandum Climatic Change of the Dutch government) and on an international level (elaboration of the UN Framework Convention on Climate Change). In order to generate ideas for standards of the climate policy a workshop was held on Environmental Quality and Climate. During the workshop standards of climatic change were highlighted from different points of view. Those views and perspectives are analyzed and the results are presented in this report. 4 figs., 31 refs

Next-generation mass standard using the superconducting magnetic levitation method; Chodendo jiki fujoho ni yoru jisedai shitsuryo hyojun

Energy Technology Data Exchange (ETDEWEB)

Miki, Yukinobu; Shiota, Fuyuhiko; Fujii, Yusaku [National Research Laboratory of Metrology, Tsukuba (Japan)

1999-10-25

The Present mass standard based on the prototype of the kilogram has some serious problems such as surface contamination and unrecoverablity in the case of damage or loss. Research on monitoring and finally replacing the present mass standard are therefore encouraged and some approaches have been proposed. In this article, the superconducting magnetic levitation method, which is one of the approaches that also makes use of the unique properties of superconductivity, is reviewed together with a brief description about mass and electric standards. (author)

Standardisation in standards

International Nuclear Information System (INIS)

McDonald, J. C.

2012-01-01

The following observations are offered by one who has served on national and international standards-writing committees and standards review committees. Service on working groups consists of either updating previous standards or developing new standards. The process of writing either type of document proceeds along similar lines. The first order of business is to recognise the need for developing or updating a standard and to identify the potential user community. It is also necessary to ensure that there is a required number of members willing to do the writing. A justification is required as to why a new standard should be developed, and this is written as a new work item proposal or a project initiation notification system form. This document must be filed officially and approved, and a search is then undertaken to ensure that the proposed new standard will not duplicate a standard that has already been published or is underway in another standards organisation. (author)

Development of Standards for Textiles and Clothing Postsecondary Programs. Final Report.

Science.gov (United States)

Iowa State Univ. of Science and Technology, Ames. Dept. of Home Economics Education.

A project was conducted to validate program standards and performance standards for four postsecondary occupational areas--fashion merchandising, fashion design, apparel, and window treatment services. Returns from 117 questionnaires from postsecondary institutions in fifty states were used to develop program standards statements and to provide…

Evaluation of Virtual Teaching-Learning Environments based on usability standards

Directory of Open Access Journals (Sweden)

Jose I. Cocunubo-Suarez

2018-01-01

Full Text Available The main objective of this review article is to determine the necessary sub-characteristics or aspects for the evaluation of Virtual Teaching-Learning Environments (VTLEs as final or finished products based on ISO 9126, 14598 and 25000-SQuaRE standards. A systematic information search was carried out. A total of 108 documents were retrieved about subjects such as web usability, virtual learning environments, usability, educational software, educational web evaluation, usability evaluation and web usability evaluation. Out of the 108 documents, 70 were selected by inclusion and exclusion analysis. The eight subfeatures of greater statistical frequency were identified among the subset of documents and then integrated as a proposal for standard 25000-SQuaRE.

The other shoe drops--FASB (Financial Accounting Standards Board) issues its proposed statement on employers' accounting for postretirement medical benefits.

Science.gov (United States)

Melbinger, M S

1989-06-01

The Financial Accounting Standards Board recently issued an exposure draft dealing with employers' accounting for postretirement medical or life insurance benefits. Mr. Melbinger explains the implications of these proposed changes in accounting procedures and discusses the status of case law dealing with employers' rights to modify or terminate retiree medical coverage.

Postgraduate research methodological flaws detected at final examination stage: Who is to blame?

Directory of Open Access Journals (Sweden)

Aceme Nyika

2014-03-01

Full Text Available In the wake of globalisation, most universities are intensifying efforts to improve their overall performance in order to attract students and enhance chances of securing competitive funding from various sources. As part of these efforts, universities are striving to ensure that their postgraduate programmes meet nationally and internationally acceptable standards. Research projects conducted by students form a critical component of most postgraduate programmes and universities have put in place procedures meant to ensure that postgraduate research meets acceptable minimum standards. The procedures include setting minimum entry educational qualifications, supervision by qualified members of university academic staff, institutional evaluation of research proposals before the proposed research is embarked on, submission of progress reports by postgraduate students during the course of their programmes, and final examination of students theses, dissertations or research reports by internal as well as external examiners. In some instances, the examiners recommend outright rejection of the student's write-up if they consider the methodology used to be inappropriate to answer research questions of the project conducted. The implications of research methodological shortcomings which are identified at the final examination stage, even if the research proposals were evaluated and approved by appropriate university structures before commencement of the research projects, are discussed. As postgraduate programmes are meant to nurture a competent and resourceful workforce and future researchers, universities need to pay attention to the issue of research methodology and internal evaluation systems in order to minimise chances of compromising the quality of their postgraduate degree programmes.

An efficient interpolation filter VLSI architecture for HEVC standard

Science.gov (United States)

Zhou, Wei; Zhou, Xin; Lian, Xiaocong; Liu, Zhenyu; Liu, Xiaoxiang

2015-12-01

The next-generation video coding standard of High-Efficiency Video Coding (HEVC) is especially efficient for coding high-resolution video such as 8K-ultra-high-definition (UHD) video. Fractional motion estimation in HEVC presents a significant challenge in clock latency and area cost as it consumes more than 40 % of the total encoding time and thus results in high computational complexity. With aims at supporting 8K-UHD video applications, an efficient interpolation filter VLSI architecture for HEVC is proposed in this paper. Firstly, a new interpolation filter algorithm based on the 8-pixel interpolation unit is proposed in this paper. It can save 19.7 % processing time on average with acceptable coding quality degradation. Based on the proposed algorithm, an efficient interpolation filter VLSI architecture, composed of a reused data path of interpolation, an efficient memory organization, and a reconfigurable pipeline interpolation filter engine, is presented to reduce the implement hardware area and achieve high throughput. The final VLSI implementation only requires 37.2k gates in a standard 90-nm CMOS technology at an operating frequency of 240 MHz. The proposed architecture can be reused for either half-pixel interpolation or quarter-pixel interpolation, which can reduce the area cost for about 131,040 bits RAM. The processing latency of our proposed VLSI architecture can support the real-time processing of 4:2:0 format 7680 × 4320@78fps video sequences.

Search for a non-standard-model Higgs boson decaying to a pair of new light bosons in four-muon final states

Energy Technology Data Exchange (ETDEWEB)

Chatrchyan, Serguei; et al.

2013-11-01

Results are reported from a search for non-standard-model Higgs boson decays to pairs of new light bosons, each of which decays into the μ⁺μ^- final state. The new bosons may be produced either promptly or via a decay chain. The data set corresponds to an integrated luminosity of 5.3 fb^-1 of proton–proton collisions at √s = 7 TeV, recorded by the CMS experiment at the LHC in 2011. Such Higgs boson decays are predicted in several scenarios of new physics, including supersymmetric models with extended Higgs sectors or hidden valleys. Thus, the results of the search are relevant for establishing whether the new particle observed in Higgs boson searches at the LHC has the properties expected for a standard model Higgs boson. No excess of events is observed with respect to the yields expected from standard model processes. A model-independent upper limit of 0.86±0.06 fb on the product of the cross section times branching fraction times acceptance is obtained. Finally, the results, which are applicable to a broad spectrum of new physics scenarios, are compared with the predictions of two benchmark models as functions of a Higgs boson mass larger than 86 GeV/c² and of a new light boson mass within the range 0.25–3.55 GeV/c².

Final report: Bilateral key comparison SIM.T-K6.3 on humidity standards in the dew/frost-point temperature range from -30°C to 20°C

Science.gov (United States)

Huang, Peter; Meyer, Christopher; Brionizio, Julio D.

2015-01-01

A Regional Metrology Organization (RMO) Key Comparison of dew/frost point temperatures was carried out by the National Institute of Standards and Technology (NIST, USA) and the Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMETRO, Brazil) between October 2009 and March 2010. The results of this comparison are reported here, along with descriptions of the humidity laboratory standards for NIST and INMETRO and the uncertainty budget for these standards. This report also describes the protocol for the comparison and presents the data acquired. The results are analyzed, determining degree of equivalence between the dew/frost-point standards of NIST and INMETRO. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCT, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

77 FR 13997 - Revising Standards Referenced in the Acetylene Standard

Science.gov (United States)

2012-03-08

...: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Proposed rule; withdrawal. SUMMARY: With this document, OSHA is withdrawing the proposed rule that accompanied its direct-final rule revising... and press inquiries: Contact Frank Meilinger, Director, OSHA Office of Communications, Room N-3647, U...

75 FR 5707 - Revising Standards Referenced in the Acetylene Standard

Science.gov (United States)

2010-02-04

...: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Proposed rule; withdrawal. SUMMARY: With this document, OSHA is withdrawing the proposed rule that accompanied its direct-final rule revising... and press inquiries: Contact Jennifer Ashley, Director, OSHA Office of Communications, Room N-3647, U...

Setting standards to determine core clerkship grades in pediatrics.

Science.gov (United States)

Dudas, Robert A; Barone, Michael A

2014-01-01

One of the greatest challenges for clerkship directors is assigning a final grade and determining the precise point at which a student either passes or fails a clinical clerkship. The process of incorporating both subjective and objective assessment data to provide a final summative grade can be challenging. We describe our experience conducting a standard-setting exercise to set defensible cut points in a 4-tiered grading system in our pediatric clerkship. Using the Hofstee standard-setting approach, 8 faculty members participated in an exercise to establish grade cut points. These faculty members were subsequently surveyed to assess their attitudes toward the standard-setting process as well as their reactions to these newly proposed standards. We applied the new cut points to a historic cohort of 116 Johns Hopkins University School of Medicine students from the academic year 2012-2013 to assess the potential impact on grade distributions. The resultant grading schema would lead to a significant increase in the number of students receiving a failing grade and a decrease in the number of students receiving a grade of honors in a historical cohort. Faculty reported that the Hofstee method was easy to understand and fair. All faculty members thought that grade inflation presently exists within the pediatric clerkship. This study demonstrates that practical standards using the Hofstee method can be set for medical students in a pediatric clerkship in which multiple performance measures are used. Copyright © 2014 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

Hospital ventilation standards and energy conservation: a summary of the literature with conclusions and recommendations. Final report, FY 78

Energy Technology Data Exchange (ETDEWEB)

Hollowell, C.; Rosenfeld, A.

1978-09-01

This research examines the basis of current hospital HVAC standards and determines if they can be relaxed on criteria that do not compromise the health, safety, and comfort of patients and staff and has acceptance of the health care community. Chapter 2 summarizes existing standards in use throughout the United States governing hospital ventilation systems and the thermal environment. Chapter 3 explores the role of air in hospital-acquired infections. Chapter 4 explores the realm of indoor air quality within the hospital. Chapter 5 contains a discussion concerning the influence of thermal factors on patient comfort. Chapter 6 discusses the hospital odor problem with regards to ventilation rates. The final chapter includes conclusions and recommendations developed from the literature review and from a small working conference sponsored by the University of Minnesota School of Public Health.

[Modularization by the open standard. (II)].

Science.gov (United States)

Muto, M; Takaha, Y; Chiba, N

2000-10-01

In recent years, accompanied by the marvelous development and spread of Laboratory Automation System(LAS), the NCCLS is now proposing five international standards for laboratory automation. We have based our laboratory on these "NCCLS standards of laboratory automation", we take these standards ahead first, and we now propose an open standard called "Open LA 21", to establish more detailed standard replacing the NCCLS laboratory automation standards.

Proposed modifications to the Lower Mokelumne River Project, California: FERC Project No. 2916-004. Final environmental impact statement

Energy Technology Data Exchange (ETDEWEB)

1993-11-01

This final environmental impact statement (FEIS) has been prepared for the Federal Energy Regulatory Commission (Commission) to consider modifications to the existing Lower Mokelumne River Project (LMRP) (FERC Project No. 2916-004) in California. Chinook salmon and steelhead trout populations in the lower Mokelumne River have experienced recent declines and fish kills associated, in part, with discharges from Camanche Dam. The California Department of Fish and Game and the California Sportfishing Protection Alliance have asked the Commission to investigate and correct these problems. A wide range of different mitigation actions has been proposed by parties participating in the scoping of this proceeding, and staff has evaluated these proposed actions in this assessment. The staff is recommending a combination of flow and non-flow modifications to the existing license, including new minimum flow and minimum pool elevation requirements at Camanche Reservoir, ramping rates on dam releases, interim attraction and out-migrant spike flows, instream habitat improvements, and a series of studies and monitoring to determine feasible means for solving off-site fish passage problems.

IRS proposes ruling on physician recruitment. How a hospital recruits physicians would affect its tax-exempt status.

Science.gov (United States)

Griffith, G M

1996-01-01

On March 15, 1995, the Internal Revenue Service (IRS) announced a proposed revenue ruling stating how certain physician recruitment practices could be implemented without threatening hospitals' tax-exemption. As proposed, the IRS ruling would provide flexibility for recruitment incentives rather than a list of strict physician recruitment guidelines. The proposed ruling is not legally binding until issued in final form, and there is no deadline for finalizing it. In the meantime, however, the standards outlined in the proposed ruling reflect arrangements the IRS likely would approve, which should be an incentive for tax-exempt hospitals to follow reasonable physician recruitment practices. Assuming a hospital complies with other legal requirements such as fraud and abuse laws, it must answer two key tax-exempt status questions for its recruitment or retention package: Will the incentives result in a disguised distribution of profits from the operation of the organization? Is the total incentive package reasonable under all the facts and circumstances, both in absolute total value for physician(s) recruited and in relation to services required by the hospital and the community? The proposed ruling also provides guidance on basic documentation requirements and a process for approving recruitment arrangements.

77 FR 68717 - Updating OSHA Standards Based on National Consensus Standards; Head Protection

Science.gov (United States)

2012-11-16

..., 1918, and 1926 [Docket No. OSH-2011-0184] RIN 1218-AC65 Updating OSHA Standards Based on National Consensus Standards; Head Protection AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Proposed rule; withdrawal. SUMMARY: With this notice, OSHA is withdrawing the proposed rule that...

Final report of AFRIMETS.M.M-S6: supplementary comparison of 100 mg, 100 g 500 g, 1 kg and 5 kg stainless steel mass standards

Science.gov (United States)

Mautjana, R. T.; Molefe, P. T.; Mayindu, N. F.; Armah, M. N.; Ramasawmy, V.; Albasini, G. L.; Matali, S.; Richmond, H.; Rusimbi, V.; Kiwanuka, J.; Mutale, D. M.; Mutsimba, F.

2018-01-01

This report summarizes the results of AFRIMETS.M.M-S6 mass standards comparison conducted between eleven participating laboratories/countries. Two sets of five weights with nominal values 100 mg, 100 g, 500 g, 1 kg and 5 kg were used as the traveling standards. These nominal values were decided from the needs of participating laboratories submitted to the pilot laboratory through a questionnaire and agreed upon by all participants. The traveling standards were hand carried between laboratories starting from February 2014 and were received from the last participants in October 2014. The programme was coordinated by National Metrology Institute of South Africa (NMISA), who provided the travelling standards and reference values for the comparison. The corrections to the BIPM as-maintained mass unit [5] have insignificant influence on the results of this comparison. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

XML-based formulation of field theoretical models. A proposal for a future standard and data base for model storage, exchange and cross-checking of results

International Nuclear Information System (INIS)

Demichev, A.; Kryukov, A.; Rodionov, A.

2002-01-01

We propose an XML-based standard for formulation of field theoretical models. The goal of creation of such a standard is to provide a way for an unambiguous exchange and cross-checking of results of computer calculations in high energy physics. At the moment, the suggested standard implies that models under consideration are of the SM or MSSM type (i.e., they are just SM or MSSM, their submodels, smooth modifications or straightforward generalizations). (author)

A epidemiologia na avaliação da qualidade: uma proposta Epidemiological standards for assessing quality: a proposal

Directory of Open Access Journals (Sweden)

Daphne Rattner

1996-01-01

physical exam, rooming-in, exclusive breastfeeding upon discharge, and referral for a puerperal consultation. Methods for classification of hospitals were the sum of their scores for each indicator, gold standard, and ranking. This methodology warranted identification of one hospital with excellent quality of care, five with good care, two with fair care, and four whose performances were completely unsatisfactory. Finally, some remarks on the assessment of quality of health care are made and future developments are proposed.

Description and status update on GELLO: a proposed standardized object-oriented expression language for clinical decision support.

Science.gov (United States)

Sordo, Margarita; Boxwala, Aziz A; Ogunyemi, Omolola; Greenes, Robert A

2004-01-01

A major obstacle to sharing computable clinical knowledge is the lack of a common language for specifying expressions and criteria. Such a language could be used to specify decision criteria, formulae, and constraints on data and action. Al-though the Arden Syntax addresses this problem for clinical rules, its generalization to HL7's object-oriented data model is limited. The GELLO Expression language is an object-oriented language used for expressing logical conditions and computations in the GLIF3 (GuideLine Interchange Format, v. 3) guideline modeling language. It has been further developed under the auspices of the HL7 Clinical Decision Support Technical Committee, as a proposed HL7 standard., GELLO is based on the Object Constraint Language (OCL), because it is vendor-independent, object-oriented, and side-effect-free. GELLO expects an object-oriented data model. Although choice of model is arbitrary, standardization is facilitated by ensuring that the data model is compatible with the HL7 Reference Information Model (RIM).

A compendium of major US radiation protection standards and guides

International Nuclear Information System (INIS)

Mills, W.A.; Flack, D.S.; Arsenault, F.J.; Conti, E.F.

1988-07-01

Following discussion of the general issue, the CIRRPC Executive Committee approved, with concurrence of the full Committee, an Oak Ridge Associated Universities (ORAU) staff proposal to develop a compendium of Fact Sheets on the major US radiation protection standards and guides, existing or proposed. The compendium contains relevant legal or statutory information and detailed technical requirements that state and describe the protection to be achieved. The report provides appropriate legislative citations; notes any legislative language that gave direction to the development of standards promulgated under the legislation; cites rationales for the standards promulgated; and provides a listing of related standards. Two consultants with considerable experience in radiation protection regulations were contracted to assist the ORAU staff in developing the report. This report has been reviewed twice by the CIRRPC member agencies; once to ensure the accuracy of all the legal and technical facts in the compendium, and once to comment on the entire document, including the accompanying text. This final report reflects consideration of all the agencies' comments received during the reviews. Part I of this report presents information on the selection, preparation and content of the Fact Sheets; an overview of their scopes, applications and modes of control; and the ORAU conclusions and recommendations. Part II contains the Fact Sheets and a User's Guide to finding relevant information in the Fact Sheets

48 CFR 15.307 - Proposal revisions.

Science.gov (United States)

2010-10-01

... AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Source Selection 15.307 Proposal revisions. (a) If an... allow proposal revisions to clarify and document understandings reached during negotiations. At the... submit a final proposal revision. The contracting officer is required to establish a common cut-off date...

Zachary-Fort Lauderdale pipeline construction and conversion project: final supplement to final environmental impact statement. Docket No. CP74-192

Energy Technology Data Exchange (ETDEWEB)

None

1980-05-01

This Final Supplement to the Final Environmental Impact Statement (Final Supplement) evaluates the economic, engineering, and environmental aspects of newly developed alternatives to an abandonment/conversion project proposed by Florida Gas Transmission Company (Florida Gas). It also updates the staff's previous FEIS and studies revisions to the original proposal. Wherever possible, the staff has adopted portions of its previous FEIS in lieu of reprinting portions of that analysis which require no change. 60 references, 8 figures, 35 tables.

Status of standardization efforts for packaging and transportation of spent fuel and high-level waste

International Nuclear Information System (INIS)

Eggers, P.E.; Dawson, D.M.

1986-01-01

This paper provides a current review of the status of efforts to develop standards and guidelines related to the packaging and transportation of spent fuel and high-level waste. An overview of each of the organizations and agencies developing standards and guidelines is discussed and includes the efforts of the N14 Division of the American National Standards Institute (ANSI), NUPACK Committee of Section III of the American Society of Mechanical Engineers, Nuclear Regulatory Commission and Department of Energy. This comparative overview identifies the scope and areas of application of each standard and guideline. In addition, the current or proposed standards and guidelines are considered collectively with commentary on areas of apparent or potential complimentary fit, overlap and incompatability. Finally, the paper reviews initiatives now being taken within the N14 division of ANSI to identify where new standards development activities are required

15 CFR 10.3 - Development of a proposed standard.

Science.gov (United States)

2010-01-01

... rational statements pertaining to the requirements and test methods contained in the standard, if deemed... be submitted to the Department for further processing. [51 FR 22497, June 20, 1986, as amended at 55...

Assessment of self-perception of physical fitness and proposal for standards among Chilean adolescent students: the EAPAF study.

Science.gov (United States)

Cossio-Bolaños, Marco; Vasquez, Pablo; Luarte-Rocha, Cristian; Sulla-Torres, José; Gómez Campos, Rossana

2016-08-01

Physical fitness may be assessed among children and adolescents in a quantitative and qualitative manner. At present, in Chile, there are no tools available to assess self-perception of physical fitness. Therefore, the purpose of this study was to develop a valid and reliable instrument that would allow to assess selfperception of physical fitness among adolescents and propose standards for age and sex. A survey was administered among adolescent students from six public schools in the Maule Region, Chile, selected in a probabilistic (stratified) fashion. To measure self-perception of physical fitness, a qualitative instrument was developed: the Self-Perception of Physical Fitness Scale (EAPAF, escala de autopercepcion de la aptitud fisica), which is made up of four dimensions and 18 questions. The LMS method (L: Box-Cox coefficient, M: median curve, and S: variation coefficient) was used to establish percentiles and propose references by dimension, age and sex. A total of 3060 adolescents (1702 boys and 1358 girls) aged 11.0 to 18.9 years old were included. The factor analysis evidenced four factors. Saturation values were above 0.40. The percentage of instrument explanation reached 54.24%. In terms of reliability, the 18 questions reflected that Cronbach's alpha was between 0.82 and 0.85. Percentiles (p15, p50 and p85) were developed to classify self-perception of physical fitness by dimension, age and sex. Boys showed higher scores in the self-perception of physical fitness scale when compared to girls (p 〈 0.001). The instrument developed in this study was valid and reliable. In addition, the standards proposed may become a useful tool to classify adolescents in relation to their selfperception of physical fitness. Sociedad Argentina de Pediatría.

A proposed standard on medical isotope production in fission reactors

International Nuclear Information System (INIS)

Schenter, R. E.; Brown, G. J.; Holden, C. S.

2006-01-01

Authors Robert E. Sehenter, Garry Brown and Charles S. Holden argue that a Standard for 'Medical Isotope Production' is needed. Medical isotopes are becoming major components of application for the diagnosis and treatment of all the major diseases including all forms of cancer, heart disease, arthritis, Alzheimer's, among others. Current nuclear data to perform calculations is incomplete, dated or imprecise or otherwise flawed for many isotopes that could have significant applications in medicine. Improved data files will assist computational analyses to design means and methods for improved isotope production techniques in the fission reactor systems. Initial focus of the Standard is expected to be on neutron cross section and branching data for both fast and thermal reactor systems. Evaluated and reviewed tables giving thermal capture cross sections and resonance integrals for the major target and product medical isotopes would be the expected 'first start' for the 'Standard Working Group'. (authors)

Social impact assessment: A review and proposed approach: Final report

International Nuclear Information System (INIS)

Bradbury, J.A.

1986-12-01

The objective of the report is to identify the essential components of a comprehensive plan to assess the potential social impacts of the proposed construction and operation of a high level radioactive waste repository by the Nevada Nuclear Waste Storage Investigations (NNWSI) Project. The tasks taken to achieve this objective are: examination of the literature on Social Impact Assessment (SIA); identification of different conceptual frameworks that have been proposed or used in SIA; examination of specific aspects of the frameworks; assessment of strengths and weaknesses of the frameworks; synthesis of common elements in these frameworks; and examination and evaluation of methods of data collection and analysis. 150 refs., 6 figs., 7 tabs

Social impact assessment: A review and proposed approach: Final report

Energy Technology Data Exchange (ETDEWEB)

Bradbury, J A

1986-12-01

The objective of the report is to identify the essential components of a comprehensive plan to assess the potential social impacts of the proposed construction and operation of a high level radioactive waste repository by the Nevada Nuclear Waste Storage Investigations (NNWSI) Project. The tasks taken to achieve this objective are: examination of the literature on Social Impact Assessment (SIA); identification of different conceptual frameworks that have been proposed or used in SIA; examination of specific aspects of the frameworks; assessment of strengths and weaknesses of the frameworks; synthesis of common elements in these frameworks; and examination and evaluation of methods of data collection and analysis. 150 refs., 6 figs., 7 tabs.

76 FR 49365 - Cost Accounting Standards: Elimination of the Exemption From Cost Accounting Standards for...

Science.gov (United States)

2011-08-10

... Accounting Standards: Elimination of the Exemption From Cost Accounting Standards for Contracts and...: Office of Management and Budget (OMB), Office of Federal Procurement Policy (OFPP), Cost Accounting... Accounting Standards (CAS) Board, is publishing a final rule to eliminate the exemption from regulations...

Patient Protection and Affordable Care Act; Exchange functions: standards for Navigators and non-Navigator assistance personnel; consumer assistance tools and programs of an Exchange and certified application counselors. Final rule.

Science.gov (United States)

2013-07-17

This final rule addresses various requirements applicable to Navigators and non-Navigator assistance personnel in Federally-facilitated Exchanges, including State Partnership Exchanges, and to non-Navigator assistance personnel in State Exchanges that are funded through federal Exchange Establishment grants. It finalizes the requirement that Exchanges must have a certified application counselor program. It creates conflict-of-interest, training and certification, and meaningful access standards; clarifies that any licensing, certification, or other standards prescribed by a state or Exchange must not prevent application of the provisions of title I of the Affordable Care Act; adds entities with relationships to issuers of stop loss insurance to the list of entities that are ineligible to become Navigators; and clarifies that the same ineligibility criteria that apply to Navigators apply to certain non-Navigator assistance personnel. The final rule also directs that each Exchange designate organizations which will then certify their staff members and volunteers to be application counselors that assist consumers and facilitate enrollment in qualified health plans and insurance affordability programs, and provides standards for that designation.

Standardization and quality management in next-generation sequencing.

Science.gov (United States)

Endrullat, Christoph; Glökler, Jörn; Franke, Philipp; Frohme, Marcus

2016-09-01

DNA sequencing continues to evolve quickly even after > 30 years. Many new platforms suddenly appeared and former established systems have vanished in almost the same manner. Since establishment of next-generation sequencing devices, this progress gains momentum due to the continually growing demand for higher throughput, lower costs and better quality of data. In consequence of this rapid development, standardized procedures and data formats as well as comprehensive quality management considerations are still scarce. Here, we listed and summarized current standardization efforts and quality management initiatives from companies, organizations and societies in form of published studies and ongoing projects. These comprise on the one hand quality documentation issues like technical notes, accreditation checklists and guidelines for validation of sequencing workflows. On the other hand, general standard proposals and quality metrics are developed and applied to the sequencing workflow steps with the main focus on upstream processes. Finally, certain standard developments for downstream pipeline data handling, processing and storage are discussed in brief. These standardization approaches represent a first basis for continuing work in order to prospectively implement next-generation sequencing in important areas such as clinical diagnostics, where reliable results and fast processing is crucial. Additionally, these efforts will exert a decisive influence on traceability and reproducibility of sequence data.

Unusual initial and final state effects in quantum chromodynamics

International Nuclear Information System (INIS)

Nelson, C.A.

1990-12-01

We have constructed fundamental test which can be used to probe discrete symmetries, and their possible violations, in the required ''new physics'' beyond the standard model. In a recent paper for applications at an e + e - collider, we have proposed a simple test for ''maximal P -- maximal C'' violation in the Z degree → τ 1 - τ 1 + coupling. For τ minus-plus → π minus-plus ν, for example, this test is based on an azimuthal correlation function I(φ e , φ) where the azimuthal angles are defined relative to the final π 1 - . For e - e + collisions in the Γ or J/Ψ regions, I(φ e , φ) can be used to test for a complex phase in the γ* → τ - τ + coupling. In other research programs, we are continuing to investigate our proposal that partons be identified with nearly degenerate, coherent quark-gluon ''jet'' states, and have proven a completeness relation for the q-analogue of the unusual coherent states

Study on the standard architecture for geoinformation common services

Science.gov (United States)

Zha, Z.; Zhang, L.; Wang, C.; Jiang, J.; Huang, W.

2014-04-01

The construction of platform for geoinformation common services was completed or on going in in most provinces and cities in these years in China, and the platforms plays an important role in the economic and social activities. Geoinfromation and geoinfromation based services are the key issues in the platform. The standards on geoinormation common services play as bridges among the users, systems and designers of the platform. The standard architecture for geoinformation common services is the guideline for designing and using the standard system in which the standards integrated to each other to promote the development, sharing and services of geoinformation resources. To establish the standard architecture for geoinformation common services is one of the tasks of "Study on important standards for geonformation common services and management of public facilities in city". The scope of the standard architecture is defined, such as data or information model, interoperability interface or service, information management. Some Research work on the status of international standards of geoinormation common services in organization and countries, like ISO/TC 211, OGC and other countries or unions like USA, EU, Japan have done. Some principles are set up to evaluate the standard, such as availability, suitability and extensible ability. Then the development requirement and practical situation are analyzed, and a framework of the standard architecture for geoinformation common services are proposed. Finally, a summary and prospects of the geoinformation standards are made.

Development of Final Running Test System for Digital Systems

Energy Technology Data Exchange (ETDEWEB)

Lee, Kwang-Dae; Lee, Eui-Jong; Lim, Hee-Taek; Kim, Min-Seok [KHNP Central Research Institute, Daejeon (Korea, Republic of)

2016-10-15

In nuclear industry, the newly designed systems to upgrade are qualified to meet IEEE standards and the regulatory guidelines for their functions, performance and reliability requirements. Failure Mode and Effect Analysis, Fault Tree Analysis, and Hazard Analysis have been used to improve the reliability of the control system. To ensure the completeness of the software, the verification and validation processes are carried out during the development process. In spite of the many efforts depending on the analysis and procedures, there are limitations to improve the reliability. The lessons learned from the currently installed system failures show the incompleteness of the final integration test. The current point-to-point and logic-to-logic separate test procedures manually performed by the engineers can cause some procedures missed and have effects on the critical functions. The design processes of the digital systems are met in accordance with the international standards and regulatory guidelines. The lessons learned from the failures of the running digital systems showed the limitations of the current verification and validation efforts. The various improvements and attempts have been considered including the expert review processes and the completeness of the test. In this paper, the Final Running Test Method evaluating the completeness of the digital system using the control patterns and the Test System Architecture are proposed.

Development of Final Running Test System for Digital Systems

International Nuclear Information System (INIS)

Lee, Kwang-Dae; Lee, Eui-Jong; Lim, Hee-Taek; Kim, Min-Seok

2016-01-01

In nuclear industry, the newly designed systems to upgrade are qualified to meet IEEE standards and the regulatory guidelines for their functions, performance and reliability requirements. Failure Mode and Effect Analysis, Fault Tree Analysis, and Hazard Analysis have been used to improve the reliability of the control system. To ensure the completeness of the software, the verification and validation processes are carried out during the development process. In spite of the many efforts depending on the analysis and procedures, there are limitations to improve the reliability. The lessons learned from the currently installed system failures show the incompleteness of the final integration test. The current point-to-point and logic-to-logic separate test procedures manually performed by the engineers can cause some procedures missed and have effects on the critical functions. The design processes of the digital systems are met in accordance with the international standards and regulatory guidelines. The lessons learned from the failures of the running digital systems showed the limitations of the current verification and validation efforts. The various improvements and attempts have been considered including the expert review processes and the completeness of the test. In this paper, the Final Running Test Method evaluating the completeness of the digital system using the control patterns and the Test System Architecture are proposed

C P asymmetry in Bd → φ KS: Standard model pollution

International Nuclear Information System (INIS)

Grossman, Y.; Worah, M. P.; Seattle, Univ. of Washington

1997-09-01

The difference in the time dependent C P asymmetries between the modes B → ψ K S and B d → φ K S is a clean signal for physics beyond the Standard Model. this interpretation could fail if there is a large enhancement of the matrix element of the b → u u-bar s operator between the B d initial state and the φ K S final state. They argue against this possibility and propose some experimental tests that could shed light on the situation

Decommissioning standards

International Nuclear Information System (INIS)

Crofford, W.N.

1980-01-01

EPA has agreed to establish a series of environmental standards for the safe disposal of radioactive waste through participation in the Interagency Review Group on Nuclear Waste Management (IRG). One of the standards required under the IRG is the standard for decommissioning of radioactive contaminated sites, facilities, and materials. This standard is to be proposed by December 1980 and promulgated by December 1981. Several considerations are important in establishing these standards. This study includes discussions of some of these considerations and attempts to evaluate their relative importance. Items covered include: the form of the standards, timing for decommissioning, occupational radiation protection, costs and financial provisions. 4 refs

Environmental assessment for the proposed CMR Building upgrades at the Los Alamos National Laboratory, Los Alamos, New Mexico. Final document

International Nuclear Information System (INIS)

1997-01-01

In order to maintain its ability to continue to conduct uninterrupted radioactive and metallurgical research in a safe, secure, and environmentally sound manner, the US Department of Energy (DOE) proposes to upgrade the Los Alamos National Laboratory (LANL) Chemistry and Metallurgy Research (CMR) Building. The building was built in the early 1950s to provide a research and experimental facility for analytical chemistry, plutonium and uranium chemistry, and metallurgy. Today, research and development activities are performed involving nuclear materials. A variety of radioactive and chemical hazards are present. The CMR Building is nearing the end of its original design life and does not meet many of today's design codes and standards. The Proposed Action for this Environmental Assessment (EA) includes structural modifications to some portions of the CMR Building which do not meet current seismic criteria for a Hazard Category 2 Facility. Also included are upgrades and improvements in building ventilation, communications, monitoring, and fire protection systems. This EA analyzes the environmental effects of construction of the proposed upgrades. The Proposed Action will have no adverse effects upon agricultural and cultural resources, wetlands and floodplains, endangered and threatened species, recreational resources, or water resources. The Proposed Action would have negligible effects on human health and transportation, and would not pose a disproportionate adverse health or environmental impact on minority or low-income populations within an 80 kilometer (50 mile) radius of the CMR Building

Environmental assessment for the proposed CMR Building upgrades at the Los Alamos National Laboratory, Los Alamos, New Mexico. Final document

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-02-04

In order to maintain its ability to continue to conduct uninterrupted radioactive and metallurgical research in a safe, secure, and environmentally sound manner, the US Department of Energy (DOE) proposes to upgrade the Los Alamos National Laboratory (LANL) Chemistry and Metallurgy Research (CMR) Building. The building was built in the early 1950s to provide a research and experimental facility for analytical chemistry, plutonium and uranium chemistry, and metallurgy. Today, research and development activities are performed involving nuclear materials. A variety of radioactive and chemical hazards are present. The CMR Building is nearing the end of its original design life and does not meet many of today`s design codes and standards. The Proposed Action for this Environmental Assessment (EA) includes structural modifications to some portions of the CMR Building which do not meet current seismic criteria for a Hazard Category 2 Facility. Also included are upgrades and improvements in building ventilation, communications, monitoring, and fire protection systems. This EA analyzes the environmental effects of construction of the proposed upgrades. The Proposed Action will have no adverse effects upon agricultural and cultural resources, wetlands and floodplains, endangered and threatened species, recreational resources, or water resources. The Proposed Action would have negligible effects on human health and transportation, and would not pose a disproportionate adverse health or environmental impact on minority or low-income populations within an 80 kilometer (50 mile) radius of the CMR Building.

Assessment of compliance costs resulting from implementation of the proposed Great Lakes water quality guidance

International Nuclear Information System (INIS)

Fenner, K.; Podar, M.; Snyder, B.

1993-01-01

The primary purpose of the study was to develop an estimate of the incremental cost to direct dischargers resulting from the implementation of the proposed Great Lakes Water Quality Guidance (GLWQG). This estimate reflects the incremental cost of complying with permit requirements developed using the Implementation Procedures and water quality criteria proposed in the GLWQG versus permit requirements based on existing State water quality standards. Two secondary analyses were also performed, one to develop a preliminary estimate of the costs that would be incurred by indirect dischargers to publicly owned treatment works (POTWs), and another to evaluate the cost-effectiveness of the GLWQG. Finally, several sensitivity analyses were performed to evaluate the impact of several major assumptions on the estimated compliance costs. To estimate compliance costs, permit limitations and conditions based on existing State water quality standards were compared to water quality-based limitations and conditions based on the proposed GLWQG criteria and Implementation Procedures for a sample of plants. The control measures needed to comply with the proposed GLWQG-based effluent limitations were evaluated. Individual plant compliance costs were estimated for these control measures based on information on treatment technology and cost analyses available in the literature. An overall compliance cost was projected from the sample based on statistical methods

78 FR 52006 - 30-Day Notice of Proposed Information Collection: Final Endorsement of Credit Instrument

Science.gov (United States)

2013-08-21

... Information Collection: Final Endorsement of Credit Instrument AGENCY: Office of the Chief Information Officer... Title of Information Collection: Final Endorsement of Credit Instrument. OMB Approval Number: 2502-0016... Credit Instrument'' form is used to request to request final [[Page 52007

Search for Standard Model H→τ"+τ"- decays in the lepton-hadron final state in proton-proton collisions with the ATLAS detector at the LHC

International Nuclear Information System (INIS)

Ruthmann, Nils

2014-01-01

This thesis presents a search for Standard Model (SM) Higgs boson decays to a pair of τ leptons in the lepton-hadron final state with the ATLAS detector at the Large Hadron Collider (LHC). The analysis is based on proton-proton collision data recorded during Run 1 of the LHC, corresponding to integrated luminosities of 4.5 fb"-"1 and 20.3 fb"-"1 at centre-of-mass energies of 7 TeV and 8 TeV, respectively. Background events from various SM processes contribute to the selected event sample at a high rate. Their contribution is efficiently separated from the expected Higgs boson signal by using boosted decision trees (BDT) in two analysis categories, which are enriched in events emerging from vector boson fusion and gluon fusion processes. The expected number of events from background processes is modelled using data-driven estimation techniques. The signal contribution is measured using a maximum likelihood fit of the BDT output distributions. An excess of events over the expected level of background events is found and corresponds to an observed (expected) significance of 2.3(2.4) standard deviations at a Higgs boson mass hypothesis of 125 GeV. The signal strength normalised to the Standard Model expectation is measured to be 0.98"+"0"."5_-_0_._5. A combined analysis of all τ-τ final states rejects the background-only hypothesis at a level of 4.5 standard deviations at m_H=125 GeV, while a significance of 3.5 standard deviations is expected. This provides evidence for the direct coupling of the recently discovered Higgs boson to tau leptons. The measured normalised signal strength of 1.4"+"0"."4"3_-_0_._3_7 is consistent with the predicted Yukawa coupling strength in the Standard Model.

78 FR 21603 - Proposed Reporting Entity; Request for Comments

Science.gov (United States)

2013-04-11

... FEDERAL ACCOUNTING STANDARDS ADVISORY BOARD Proposed Reporting Entity; Request for Comments AGENCY... seeking input on a proposed Statement of Federal Financial Accounting Standards addressing the Reporting Entity. The Standard is available at http://www.fasab.gov/board-activities/documents-for-comment/exposure...

Analysis of the prevailing standard and technical documents for their applicability under conditions of the 'Ukrytie' operation and technical proposals relating to the elaboration of new ones concerning fire safety

International Nuclear Information System (INIS)

Nazarenko, B.S.; Emets, V.G.

1998-01-01

An analysis of the prevailing laws and standards and technical documents (STD) to ensure safe operation of nuclear power installations, with requirements of nuclear, radiation and fire safety taken into account, has been performed. Proposals on application of some items of prevailing STD under conditions of the 'Ukrytie' operation are presented. Also given are technical proposals on correction of the prevailing operational standard documents and elaboration of special STD

ILK statement about the proposed EU directives on nuclear safety and the management of radioactive waste

International Nuclear Information System (INIS)

2003-01-01

In November 2002, the European Commission proposed a package of measures for a community concept of the EU on nuclear safety. It includes a proposed directive on the safety of nuclear installations during operating and decommissioning, and a proposed directive on the management of radioactive waste. In the opinion of the International Nuclear Committee (ILK), the competences and obligations of the member states and their safety authorities must be preserved in the future. Primary responsibility for plant safety rests with the operator. This objective is served by transparent, harmonized EU-wide safety standards. New standards and definitions are not generally required. Harmonized safety standards to be developed should initially be limited to nuclear power plants because of the fundamental differences in design of nuclear facilities. The Commission should obtain the technical competence required to perform the duties arising from the application of the proposed directive. Formal inspections by the Commission of the national regulatory authorities are not necessary. Instead, a peer review process will be the better solution. A reporting system at three-year intervals is generally regarded as the most effective approach. The ILK considers the tight schedule for final storage, especially of high-level waste, problematic. Joint repository projects, also for countries with low waste arisings, are suitable approaches. The envisaged reports about the state of radioactive waste management should be integrated into the reporting systems under other international agreements. The Commission's intention to intensify cooperation in the field of research is welcomed. (orig.) [de

77 FR 68684 - Updating OSHA Standards Based on National Consensus Standards; Head Protection

Science.gov (United States)

2012-11-16

..., 1918, and 1926 [Docket No. OSHA-2011-0184] RIN 1218-AC65 Updating OSHA Standards Based on National Consensus Standards; Head Protection AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Final rule; confirmation of effective date. SUMMARY: OSHA is confirming the effective date of its...

Search for a non-standard-model Higgs boson decaying to a pair of new light bosons in four-muon final states

CERN Document Server

Chatrchyan, Serguei; Sirunyan, Albert M; Tumasyan, Armen; Adam, Wolfgang; Aguilo, Ernest; Bergauer, Thomas; Dragicevic, Marko; Erö, Janos; Fabjan, Christian; Friedl, Markus; Fruehwirth, Rudolf; Ghete, Vasile Mihai; Hammer, Josef; Hörmann, Natascha; Hrubec, Josef; Jeitler, Manfred; Kiesenhofer, Wolfgang; Knünz, Valentin; Krammer, Manfred; Krätschmer, Ilse; Liko, Dietrich; Mikulec, Ivan; Pernicka, Manfred; Rahbaran, Babak; Rohringer, Christine; Rohringer, Herbert; Schöfbeck, Robert; Strauss, Josef; Taurok, Anton; Waltenberger, Wolfgang; Walzel, Gerhard; Widl, Edmund; Wulz, Claudia-Elisabeth; Mossolov, Vladimir; Shumeiko, Nikolai; Suarez Gonzalez, Juan; Bansal, Monika; Bansal, Sunil; Cornelis, Tom; De Wolf, Eddi A; Janssen, Xavier; Luyckx, Sten; Mucibello, Luca; Ochesanu, Silvia; Roland, Benoit; Rougny, Romain; Selvaggi, Michele; Staykova, Zlatka; Van Haevermaet, Hans; Van Mechelen, Pierre; Van Remortel, Nick; Van Spilbeeck, Alex; Blekman, Freya; Blyweert, Stijn; D'Hondt, Jorgen; Gonzalez Suarez, Rebeca; Kalogeropoulos, Alexis; Maes, Michael; Olbrechts, Annik; Van Doninck, Walter; Van Mulders, Petra; Van Onsem, Gerrit Patrick; Villella, Ilaria; Clerbaux, Barbara; De Lentdecker, Gilles; Dero, Vincent; Gay, Arnaud; Hreus, Tomas; Léonard, Alexandre; Marage, Pierre Edouard; Mohammadi, Abdollah; Reis, Thomas; Thomas, Laurent; Vander Marcken, Gil; Vander Velde, Catherine; Vanlaer, Pascal; Wang, Jian; Adler, Volker; Beernaert, Kelly; Cimmino, Anna; Costantini, Silvia; Garcia, Guillaume; Grunewald, Martin; Klein, Benjamin; Lellouch, Jérémie; Marinov, Andrey; Mccartin, Joseph; Ocampo Rios, Alberto Andres; Ryckbosch, Dirk; Strobbe, Nadja; Thyssen, Filip; Tytgat, Michael; Verwilligen, Piet; Walsh, Sinead; Yazgan, Efe; Zaganidis, Nicolas; Basegmez, Suzan; Bruno, Giacomo; Castello, Roberto; Ceard, Ludivine; Delaere, Christophe; Du Pree, Tristan; Favart, Denis; Forthomme, Laurent; Giammanco, Andrea; Hollar, Jonathan; Lemaitre, Vincent; Liao, Junhui; Militaru, Otilia; Nuttens, Claude; Pagano, Davide; Pin, Arnaud; Piotrzkowski, Krzysztof; Schul, Nicolas; Vizan Garcia, Jesus Manuel; Beliy, Nikita; Caebergs, Thierry; Daubie, Evelyne; Hammad, Gregory Habib; Alves, Gilvan; Correa Martins Junior, Marcos; Martins, Thiago; Pol, Maria Elena; Henrique Gomes E Souza, Moacyr; Aldá Júnior, Walter Luiz; Carvalho, Wagner; Custódio, Analu; Melo Da Costa, Eliza; De Jesus Damiao, Dilson; De Oliveira Martins, Carley; Fonseca De Souza, Sandro; Matos Figueiredo, Diego; Mundim, Luiz; Nogima, Helio; Oguri, Vitor; Prado Da Silva, Wanda Lucia; Santoro, Alberto; Soares Jorge, Luana; Sznajder, Andre; Souza Dos Anjos, Tiago; Bernardes, Cesar Augusto; De Almeida Dias, Flavia; Tomei, Thiago; De Moraes Gregores, Eduardo; Lagana, Caio; Da Cunha Marinho, Franciole; Mercadante, Pedro G; Novaes, Sergio F; Padula, Sandra; Genchev, Vladimir; Iaydjiev, Plamen; Piperov, Stefan; Rodozov, Mircho; Stoykova, Stefka; Sultanov, Georgi; Tcholakov, Vanio; Trayanov, Rumen; Vutova, Mariana; Dimitrov, Anton; Hadjiiska, Roumyana; Kozhuharov, Venelin; Litov, Leander; Pavlov, Borislav; Petkov, Peicho; Bian, Jian-Guo; Chen, Guo-Ming; Chen, He-Sheng; Jiang, Chun-Hua; Liang, Dong; Liang, Song; Meng, Xiangwei; Tao, Junquan; Wang, Jian; Wang, Xianyou; Wang, Zheng; Xiao, Hong; Xu, Ming; Zang, Jingjing; Zhang, Zhen; Asawatangtrakuldee, Chayanit; Ban, Yong; Guo, Yifei; Li, Wenbo; Liu, Shuai; Mao, Yajun; Qian, Si-Jin; Teng, Haiyun; Wang, Dayong; Zhang, Linlin; Zou, Wei; Avila, Carlos; Gomez, Juan Pablo; Gomez Moreno, Bernardo; Osorio Oliveros, Andres Felipe; Sanabria, Juan Carlos; Godinovic, Nikola; Lelas, Damir; Plestina, Roko; Polic, Dunja; Puljak, Ivica; Antunovic, Zeljko; Kovac, Marko; Brigljevic, Vuko; Duric, Senka; Kadija, Kreso; Luetic, Jelena; Morovic, Srecko; Attikis, Alexandros; Galanti, Mario; Mavromanolakis, Georgios; Mousa, Jehad; Nicolaou, Charalambos; Ptochos, Fotios; Razis, Panos A; Finger, Miroslav; Finger Jr, Michael; Assran, Yasser; Elgammal, Sherif; Ellithi Kamel, Ali; Mahmoud, Mohammed; Radi, Amr; Kadastik, Mario; Müntel, Mait; Raidal, Martti; Rebane, Liis; Tiko, Andres; Eerola, Paula; Fedi, Giacomo; Voutilainen, Mikko; Härkönen, Jaakko; Heikkinen, Mika Aatos; Karimäki, Veikko; Kinnunen, Ritva; Kortelainen, Matti J; Lampén, Tapio; Lassila-Perini, Kati; Lehti, Sami; Lindén, Tomas; Luukka, Panja-Riina; Mäenpää, Teppo; Peltola, Timo; Tuominen, Eija; Tuominiemi, Jorma; Tuovinen, Esa; Ungaro, Donatella; Wendland, Lauri; Banzuzi, Kukka; Karjalainen, Ahti; Korpela, Arja; Tuuva, Tuure; Besancon, Marc; Choudhury, Somnath; Dejardin, Marc; Denegri, Daniel; Fabbro, Bernard; Faure, Jean-Louis; Ferri, Federico; Ganjour, Serguei; Givernaud, Alain; Gras, Philippe; Hamel de Monchenault, Gautier; Jarry, Patrick; Locci, Elizabeth; Malcles, Julie; Millischer, Laurent; Nayak, Aruna; Rander, John; Rosowsky, André; Shreyber, Irina; Titov, Maksym; Baffioni, Stephanie; Beaudette, Florian; Benhabib, Lamia; Bianchini, Lorenzo; Bluj, Michal; Broutin, Clementine; Busson, Philippe; Charlot, Claude; Daci, Nadir; Dahms, Torsten; Dalchenko, Mykhailo; Dobrzynski, Ludwik; Granier de Cassagnac, Raphael; Haguenauer, Maurice; Miné, Philippe; Mironov, Camelia; Naranjo, Ivo Nicolas; Nguyen, Matthew; Ochando, Christophe; Paganini, Pascal; Sabes, David; Salerno, Roberto; Sirois, Yves; Veelken, Christian; Zabi, Alexandre; Agram, Jean-Laurent; Andrea, Jeremy; Bloch, Daniel; Bodin, David; Brom, Jean-Marie; Cardaci, Marco; Chabert, Eric Christian; Collard, Caroline; Conte, Eric; Drouhin, Frédéric; Ferro, Cristina; Fontaine, Jean-Charles; Gelé, Denis; Goerlach, Ulrich; Juillot, Pierre; Le Bihan, Anne-Catherine; Van Hove, Pierre; Fassi, Farida; Mercier, Damien; Beauceron, Stephanie; Beaupere, Nicolas; Bondu, Olivier; Boudoul, Gaelle; Chasserat, Julien; Chierici, Roberto; Contardo, Didier; Depasse, Pierre; El Mamouni, Houmani; Fay, Jean; Gascon, Susan; Gouzevitch, Maxime; Ille, Bernard; Kurca, Tibor; Lethuillier, Morgan; Mirabito, Laurent; Perries, Stephane; Sgandurra, Louis; Sordini, Viola; Tschudi, Yohann; Verdier, Patrice; Viret, Sébastien; Tsamalaidze, Zviad; Anagnostou, Georgios; Autermann, Christian; Beranek, Sarah; Edelhoff, Matthias; Feld, Lutz; Heracleous, Natalie; Hindrichs, Otto; Jussen, Ruediger; Klein, Katja; Merz, Jennifer; Ostapchuk, Andrey; Perieanu, Adrian; Raupach, Frank; Sammet, Jan; Schael, Stefan; Sprenger, Daniel; Weber, Hendrik; Wittmer, Bruno; Zhukov, Valery; Ata, Metin; Caudron, Julien; Dietz-Laursonn, Erik; Duchardt, Deborah; Erdmann, Martin; Fischer, Robert; Güth, Andreas; Hebbeker, Thomas; Heidemann, Carsten; Hoepfner, Kerstin; Klingebiel, Dennis; Kreuzer, Peter; Merschmeyer, Markus; Meyer, Arnd; Olschewski, Mark; Papacz, Paul; Pieta, Holger; Reithler, Hans; Schmitz, Stefan Antonius; Sonnenschein, Lars; Steggemann, Jan; Teyssier, Daniel; Weber, Martin; Bontenackels, Michael; Cherepanov, Vladimir; Erdogan, Yusuf; Flügge, Günter; Geenen, Heiko; Geisler, Matthias; Haj Ahmad, Wael; Hoehle, Felix; Kargoll, Bastian; Kress, Thomas; Kuessel, Yvonne; Lingemann, Joschka; Nowack, Andreas; Perchalla, Lars; Pooth, Oliver; Sauerland, Philip; Stahl, Achim; Aldaya Martin, Maria; Behr, Joerg; Behrenhoff, Wolf; Behrens, Ulf; Bergholz, Matthias; Bethani, Agni; Borras, Kerstin; Burgmeier, Armin; Cakir, Altan; Calligaris, Luigi; Campbell, Alan; Castro, Elena; Costanza, Francesco; Dammann, Dirk; Diez Pardos, Carmen; Eckerlin, Guenter; Eckstein, Doris; Flucke, Gero; Geiser, Achim; Glushkov, Ivan; Gunnellini, Paolo; Habib, Shiraz; Hauk, Johannes; Hellwig, Gregor; Jung, Hannes; Kasemann, Matthias; Katsas, Panagiotis; Kleinwort, Claus; Kluge, Hannelies; Knutsson, Albert; Krämer, Mira; Krücker, Dirk; Kuznetsova, Ekaterina; Lange, Wolfgang; Lohmann, Wolfgang; Lutz, Benjamin; Mankel, Rainer; Marfin, Ihar; Marienfeld, Markus; Melzer-Pellmann, Isabell-Alissandra; Meyer, Andreas Bernhard; Mnich, Joachim; Mussgiller, Andreas; Naumann-Emme, Sebastian; Novgorodova, Olga; Olzem, Jan; Perrey, Hanno; Petrukhin, Alexey; Pitzl, Daniel; Raspereza, Alexei; Ribeiro Cipriano, Pedro M; Riedl, Caroline; Ron, Elias; Rosin, Michele; Salfeld-Nebgen, Jakob; Schmidt, Ringo; Schoerner-Sadenius, Thomas; Sen, Niladri; Spiridonov, Alexander; Stein, Matthias; Walsh, Roberval; Wissing, Christoph; Blobel, Volker; Draeger, Jula; Enderle, Holger; Erfle, Joachim; Gebbert, Ulla; Görner, Martin; Hermanns, Thomas; Höing, Rebekka Sophie; Kaschube, Kolja; Kaussen, Gordon; Kirschenmann, Henning; Klanner, Robert; Lange, Jörn; Mura, Benedikt; Nowak, Friederike; Peiffer, Thomas; Pietsch, Niklas; Rathjens, Denis; Sander, Christian; Schettler, Hannes; Schleper, Peter; Schlieckau, Eike; Schmidt, Alexander; Schröder, Matthias; Schum, Torben; Seidel, Markus; Sibille, Jennifer; Sola, Valentina; Stadie, Hartmut; Steinbrück, Georg; Thomsen, Jan; Vanelderen, Lukas; Barth, Christian; Berger, Joram; Böser, Christian; Chwalek, Thorsten; De Boer, Wim; Descroix, Alexis; Dierlamm, Alexander; Feindt, Michael; Guthoff, Moritz; Hackstein, Christoph; Hartmann, Frank; Hauth, Thomas; Heinrich, Michael; Held, Hauke; Hoffmann, Karl-Heinz; Husemann, Ulrich; Katkov, Igor; Komaragiri, Jyothsna Rani; Lobelle Pardo, Patricia; Martschei, Daniel; Mueller, Steffen; Müller, Thomas; Niegel, Martin; Nürnberg, Andreas; Oberst, Oliver; Oehler, Andreas; Ott, Jochen; Quast, Gunter; Rabbertz, Klaus; Ratnikov, Fedor; Ratnikova, Natalia; Röcker, Steffen; Schilling, Frank-Peter; Schott, Gregory; Simonis, Hans-Jürgen; Stober, Fred-Markus Helmut; Troendle, Daniel; Ulrich, Ralf; Wagner-Kuhr, Jeannine; Wayand, Stefan; Weiler, Thomas; Zeise, Manuel; Daskalakis, Georgios; Geralis, Theodoros; Kesisoglou, Stilianos; Kyriakis, Aristotelis; Loukas, Demetrios; Manolakos, Ioannis; Markou, Athanasios; Markou, Christos; Mavrommatis, Charalampos; Ntomari, Eleni; Gouskos, Loukas; Mertzimekis, Theodoros; Panagiotou, Apostolos; Saoulidou, Niki; Evangelou, Ioannis; Foudas, Costas; Kokkas, Panagiotis; Manthos, Nikolaos; Papadopoulos, Ioannis; Patras, Vaios; Bencze, Gyorgy; Hajdu, Csaba; Hidas, Pàl; Horvath, Dezso; Sikler, Ferenc; Veszpremi, Viktor; Vesztergombi, Gyorgy; Beni, Noemi; Czellar, Sandor; Molnar, Jozsef; Palinkas, Jozsef; Szillasi, Zoltan; Karancsi, János; Raics, Peter; Trocsanyi, Zoltan Laszlo; Ujvari, Balazs; Beri, Suman Bala; Bhatnagar, Vipin; Dhingra, Nitish; Gupta, Ruchi; Kaur, Manjit; Mehta, Manuk Zubin; Nishu, Nishu; Saini, Lovedeep Kaur; Sharma, Archana; Singh, Jasbir; Kumar, Ashok; Kumar, Arun; Ahuja, Sudha; Bhardwaj, Ashutosh; Choudhary, Brajesh C; Malhotra, Shivali; Naimuddin, Md; Ranjan, Kirti; Sharma, Varun; Shivpuri, Ram Krishen; Banerjee, Sunanda; Bhattacharya, Satyaki; Dutta, Suchandra; Gomber, Bhawna; Jain, Sandhya; Jain, Shilpi; Khurana, Raman; Sarkar, Subir; Sharan, Manoj; Abdulsalam, Abdulla; Choudhury, Rajani Kant; Dutta, Dipanwita; Kailas, Swaminathan; Kumar, Vineet; Mehta, Pourus; Mohanty, Ajit Kumar; Pant, Lalit Mohan; Shukla, Prashant; Aziz, Tariq; Ganguly, Sanmay; Guchait, Monoranjan; Maity, Manas; Majumder, Gobinda; Mazumdar, Kajari; Mohanty, Gagan Bihari; Parida, Bibhuti; Sudhakar, Katta; Wickramage, Nadeesha; Banerjee, Sudeshna; Dugad, Shashikant; Arfaei, Hessamaddin; Bakhshiansohi, Hamed; Etesami, Seyed Mohsen; Fahim, Ali; Hashemi, Majid; Hesari, Hoda; Jafari, Abideh; Khakzad, Mohsen; Mohammadi Najafabadi, Mojtaba; Paktinat Mehdiabadi, Saeid; Safarzadeh, Batool; Zeinali, Maryam; Abbrescia, Marcello; Barbone, Lucia; Calabria, Cesare; Chhibra, Simranjit Singh; Colaleo, Anna; Creanza, Donato; De Filippis, Nicola; De Palma, Mauro; Fiore, Luigi; Iaselli, Giuseppe; Maggi, Giorgio; Maggi, Marcello; Marangelli, Bartolomeo; My, Salvatore; Nuzzo, Salvatore; Pacifico, Nicola; Pompili, Alexis; Pugliese, Gabriella; Selvaggi, Giovanna; Silvestris, Lucia; Singh, Gurpreet; Venditti, Rosamaria; Zito, Giuseppe; Abbiendi, Giovanni; Benvenuti, Alberto; Bonacorsi, Daniele; Braibant-Giacomelli, Sylvie; Brigliadori, Luca; Capiluppi, Paolo; Castro, Andrea; Cavallo, Francesca Romana; Cuffiani, Marco; Dallavalle, Gaetano-Marco; Fabbri, Fabrizio; Fanfani, Alessandra; Fasanella, Daniele; Giacomelli, Paolo; Grandi, Claudio; Guiducci, Luigi; Marcellini, Stefano; Masetti, Gianni; Meneghelli, Marco; Montanari, Alessandro; Navarria, Francesco; Odorici, Fabrizio; Perrotta, Andrea; Primavera, Federica; Rossi, Antonio; Rovelli, Tiziano; Siroli, Gian Piero; Travaglini, Riccardo; Albergo, Sebastiano; Cappello, Gigi; Chiorboli, Massimiliano; Costa, Salvatore; Potenza, Renato; Tricomi, Alessia; Tuve, Cristina; Barbagli, Giuseppe; Ciulli, Vitaliano; Civinini, Carlo; D'Alessandro, Raffaello; Focardi, Ettore; Frosali, Simone; Gallo, Elisabetta; Gonzi, Sandro; Meschini, Marco; Paoletti, Simone; Sguazzoni, Giacomo; Tropiano, Antonio; Benussi, Luigi; Bianco, Stefano; Colafranceschi, Stefano; Fabbri, Franco; Piccolo, Davide; Fabbricatore, Pasquale; Musenich, Riccardo; Tosi, Silvano; Benaglia, Andrea; De Guio, Federico; Di Matteo, Leonardo; Fiorendi, Sara; Gennai, Simone; Ghezzi, Alessio; Malvezzi, Sandra; Manzoni, Riccardo Andrea; Martelli, Arabella; Massironi, Andrea; Menasce, Dario; Moroni, Luigi; Paganoni, Marco; Pedrini, Daniele; Ragazzi, Stefano; Redaelli, Nicola; Sala, Silvano; Tabarelli de Fatis, Tommaso; Buontempo, Salvatore; Carrillo Montoya, Camilo Andres; Cavallo, Nicola; De Cosa, Annapaola; Dogangun, Oktay; Fabozzi, Francesco; Iorio, Alberto Orso Maria; Lista, Luca; Meola, Sabino; Merola, Mario; Paolucci, Pierluigi; Azzi, Patrizia; Bacchetta, Nicola; Bisello, Dario; Branca, Antonio; Carlin, Roberto; Checchia, Paolo; Dorigo, Tommaso; Gasparini, Fabrizio; Gasparini, Ugo; Gozzelino, Andrea; Kanishchev, Konstantin; Lacaprara, Stefano; Lazzizzera, Ignazio; Margoni, Martino; Meneguzzo, Anna Teresa; Passaseo, Marina; Pazzini, Jacopo; Pegoraro, Matteo; Pozzobon, Nicola; Ronchese, Paolo; Simonetto, Franco; Torassa, Ezio; Tosi, Mia; Vanini, Sara; Zotto, Pierluigi; Gabusi, Michele; Ratti, Sergio P; Riccardi, Cristina; Torre, Paola; Vitulo, Paolo; Biasini, Maurizio; Bilei, Gian Mario; Fanò, Livio; Lariccia, Paolo; Mantovani, Giancarlo; Menichelli, Mauro; Nappi, Aniello; Romeo, Francesco; Saha, Anirban; Santocchia, Attilio; Spiezia, Aniello; Taroni, Silvia; Azzurri, Paolo; Bagliesi, Giuseppe; Bernardini, Jacopo; Boccali, Tommaso; Broccolo, Giuseppe; Castaldi, Rino; D'Agnolo, Raffaele Tito; Dell'Orso, Roberto; Fiori, Francesco; Foà, Lorenzo; Giassi, Alessandro; Kraan, Aafke; Ligabue, Franco; Lomtadze, Teimuraz; Martini, Luca; Messineo, Alberto; Palla, Fabrizio; Rizzi, Andrea; Serban, Alin Titus; Spagnolo, Paolo; Squillacioti, Paola; Tenchini, Roberto; Tonelli, Guido; Venturi, Andrea; Verdini, Piero Giorgio; Barone, Luciano; Cavallari, Francesca; Del Re, Daniele; Diemoz, Marcella; Fanelli, Cristiano; Grassi, Marco; Longo, Egidio; Meridiani, Paolo; Micheli, Francesco; Nourbakhsh, Shervin; Organtini, Giovanni; Paramatti, Riccardo; Rahatlou, Shahram; Sigamani, Michael; Soffi, Livia; Amapane, Nicola; Arcidiacono, Roberta; Argiro, Stefano; Arneodo, Michele; Biino, Cristina; Cartiglia, Nicolo; Costa, Marco; Demaria, Natale; Mariotti, Chiara; Maselli, Silvia; Migliore, Ernesto; Monaco, Vincenzo; Musich, Marco; Obertino, Maria Margherita; Pastrone, Nadia; Pelliccioni, Mario; Potenza, Alberto; Romero, Alessandra; Ruspa, Marta; Sacchi, Roberto; Solano, Ada; Staiano, Amedeo; Vilela Pereira, Antonio; Belforte, Stefano; Candelise, Vieri; Casarsa, Massimo; Cossutti, Fabio; Della Ricca, Giuseppe; Gobbo, Benigno; Marone, Matteo; Montanino, Damiana; Penzo, Aldo; Schizzi, Andrea; Heo, Seong Gu; Kim, Tae Yeon; Nam, Soon-Kwon; Chang, Sunghyun; Kim, Dong Hee; Kim, Gui Nyun; Kong, Dae Jung; Park, Hyangkyu; Ro, Sang-Ryul; Son, Dong-Chul; Son, Taejin; Kim, Jae Yool; Kim, Zero Jaeho; Song, Sanghyeon; Choi, Suyong; Gyun, Dooyeon; Hong, Byung-Sik; Jo, Mihee; Kim, Hyunchul; Kim, Tae Jeong; Lee, Kyong Sei; Moon, Dong Ho; Park, Sung Keun; Choi, Minkyoo; Kim, Ji Hyun; Park, Chawon; Park, Inkyu; Park, Sangnam; Ryu, Geonmo; Cho, Yongjin; Choi, Young-Il; Choi, Young Kyu; Goh, Junghwan; Kim, Min Suk; Kwon, Eunhyang; Lee, Byounghoon; Lee, Jongseok; Lee, Sungeun; Seo, Hyunkwan; Yu, Intae; Bilinskas, Mykolas Jurgis; Grigelionis, Ignas; Janulis, Mindaugas; Juodagalvis, Andrius; Castilla-Valdez, Heriberto; De La Cruz-Burelo, Eduard; Heredia-de La Cruz, Ivan; Lopez-Fernandez, Ricardo; Magaña Villalba, Ricardo; Martínez-Ortega, Jorge; Sánchez Hernández, Alberto; Villasenor-Cendejas, Luis Manuel; Carrillo Moreno, Salvador; Vazquez Valencia, Fabiola; Salazar Ibarguen, Humberto Antonio; Casimiro Linares, Edgar; Morelos Pineda, Antonio; Reyes-Santos, Marco A; Krofcheck, David; Bell, Alan James; Butler, Philip H; Doesburg, Robert; Reucroft, Steve; Silverwood, Hamish; Ahmad, Muhammad; Ansari, Muhammad Hamid; Asghar, Muhammad Irfan; Butt, Jamila; Hoorani, Hafeez R; Khalid, Shoaib; Khan, Wajid Ali; Khurshid, Taimoor; Qazi, Shamona; Shah, Mehar Ali; Shoaib, Muhammad; Bialkowska, Helena; Boimska, Bozena; Frueboes, Tomasz; Gokieli, Ryszard; Górski, Maciej; Kazana, Malgorzata; Nawrocki, Krzysztof; Romanowska-Rybinska, Katarzyna; Szleper, Michal; Wrochna, Grzegorz; Zalewski, Piotr; Brona, Grzegorz; Bunkowski, Karol; Cwiok, Mikolaj; Dominik, Wojciech; Doroba, Krzysztof; Kalinowski, Artur; Konecki, Marcin; Krolikowski, Jan; Almeida, Nuno; Bargassa, Pedrame; David Tinoco Mendes, Andre; Faccioli, Pietro; Ferreira Parracho, Pedro Guilherme; Gallinaro, Michele; Seixas, Joao; Varela, Joao; Vischia, Pietro; Belotelov, Ivan; Bunin, Pavel; Golutvin, Igor; Gorbunov, Ilya; Kamenev, Alexey; Karjavin, Vladimir; Kozlov, Guennady; Lanev, Alexander; Malakhov, Alexander; Moisenz, Petr; Palichik, Vladimir; Perelygin, Victor; Savina, Maria; Shmatov, Sergey; Smirnov, Vitaly; Volodko, Anton; Zarubin, Anatoli; Evstyukhin, Sergey; Golovtsov, Victor; Ivanov, Yury; Kim, Victor; Levchenko, Petr; Murzin, Victor; Oreshkin, Vadim; Smirnov, Igor; Sulimov, Valentin; Uvarov, Lev; Vavilov, Sergey; Vorobyev, Alexey; Vorobyev, Andrey; Andreev, Yuri; Dermenev, Alexander; Gninenko, Sergei; Golubev, Nikolai; Kirsanov, Mikhail; Krasnikov, Nikolai; Matveev, Viktor; Pashenkov, Anatoli; Tlisov, Danila; Toropin, Alexander; Epshteyn, Vladimir; Erofeeva, Maria; Gavrilov, Vladimir; Kossov, Mikhail; Lychkovskaya, Natalia; Popov, Vladimir; Safronov, Grigory; Semenov, Sergey; Stolin, Viatcheslav; Vlasov, Evgueni; Zhokin, Alexander; Belyaev, Andrey; Boos, Edouard; Dubinin, Mikhail; Dudko, Lev; Ershov, Alexander; Gribushin, Andrey; Klyukhin, Vyacheslav; Kodolova, Olga; Lokhtin, Igor; Markina, Anastasia; Obraztsov, Stepan; Perfilov, Maxim; Petrushanko, Sergey; Popov, Andrey; Sarycheva, Ludmila; Savrin, Viktor; Snigirev, Alexander; Andreev, Vladimir; Azarkin, Maksim; Dremin, Igor; Kirakosyan, Martin; Leonidov, Andrey; Mesyats, Gennady; Rusakov, Sergey V; Vinogradov, Alexey; Azhgirey, Igor; Bayshev, Igor; Bitioukov, Sergei; Grishin, Viatcheslav; Kachanov, Vassili; Konstantinov, Dmitri; Krychkine, Victor; Petrov, Vladimir; Ryutin, Roman; Sobol, Andrei; Tourtchanovitch, Leonid; Troshin, Sergey; Tyurin, Nikolay; Uzunian, Andrey; Volkov, Alexey; Adzic, Petar; Djordjevic, Milos; Ekmedzic, Marko; Krpic, Dragomir; Milosevic, Jovan; Aguilar-Benitez, Manuel; Alcaraz Maestre, Juan; Arce, Pedro; Battilana, Carlo; Calvo, Enrique; Cerrada, Marcos; Chamizo Llatas, Maria; Colino, Nicanor; De La Cruz, Begona; Delgado Peris, Antonio; Domínguez Vázquez, Daniel; Fernandez Bedoya, Cristina; Fernández Ramos, Juan Pablo; Ferrando, Antonio; Flix, Jose; Fouz, Maria Cruz; Garcia-Abia, Pablo; Gonzalez Lopez, Oscar; Goy Lopez, Silvia; Hernandez, Jose M; Josa, Maria Isabel; Merino, Gonzalo; Puerta Pelayo, Jesus; Quintario Olmeda, Adrián; Redondo, Ignacio; Romero, Luciano; Santaolalla, Javier; Senghi Soares, Mara; Willmott, Carlos; Albajar, Carmen; Codispoti, Giuseppe; de Trocóniz, Jorge F; Brun, Hugues; Cuevas, Javier; Fernandez Menendez, Javier; Folgueras, Santiago; Gonzalez Caballero, Isidro; Lloret Iglesias, Lara; Piedra Gomez, Jonatan; Brochero Cifuentes, Javier Andres; Cabrillo, Iban Jose; Calderon, Alicia; Chuang, Shan-Huei; Duarte Campderros, Jordi; Felcini, Marta; Fernandez, Marcos; Gomez, Gervasio; Gonzalez Sanchez, Javier; Graziano, Alberto; Jorda, Clara; Lopez Virto, Amparo; Marco, Jesus; Marco, Rafael; Martinez Rivero, Celso; Matorras, Francisco; Munoz Sanchez, Francisca Javiela; Rodrigo, Teresa; Rodríguez-Marrero, Ana Yaiza; Ruiz-Jimeno, Alberto; Scodellaro, Luca; Vila, Ivan; Vilar Cortabitarte, Rocio; Abbaneo, Duccio; Auffray, Etiennette; Auzinger, Georg; Bachtis, Michail; Baillon, Paul; Ball, Austin; Barney, David; Benitez, Jose F; Bernet, Colin; Bianchi, Giovanni; Bloch, Philippe; Bocci, Andrea; Bonato, Alessio; Botta, Cristina; Breuker, Horst; Camporesi, Tiziano; Cerminara, Gianluca; Christiansen, Tim; Coarasa Perez, Jose Antonio; D'Enterria, David; Dabrowski, Anne; De Roeck, Albert; Di Guida, Salvatore; Dobson, Marc; Dupont-Sagorin, Niels; Elliott-Peisert, Anna; Frisch, Benjamin; Funk, Wolfgang; Georgiou, Georgios; Giffels, Manuel; Gigi, Dominique; Gill, Karl; Giordano, Domenico; Girone, Maria; Giunta, Marina; Glege, Frank; Gomez-Reino Garrido, Robert; Govoni, Pietro; Gowdy, Stephen; Guida, Roberto; Hansen, Magnus; Harris, Philip; Hartl, Christian; Harvey, John; Hegner, Benedikt; Hinzmann, Andreas; Innocente, Vincenzo; Janot, Patrick; Kaadze, Ketino; Karavakis, Edward; Kousouris, Konstantinos; Lecoq, Paul; Lee, Yen-Jie; Lenzi, Piergiulio; Lourenco, Carlos; Magini, Nicolo; Maki, Tuula; Malberti, Martina; Malgeri, Luca; Mannelli, Marcello; Masetti, Lorenzo; Meijers, Frans; Mersi, Stefano; Meschi, Emilio; Moser, Roland; Mozer, Matthias Ulrich; Mulders, Martijn; Musella, Pasquale; Nesvold, Erik; Orimoto, Toyoko; Orsini, Luciano; Palencia Cortezon, Enrique; Perez, Emmanuelle; Perrozzi, Luca; Petrilli, Achille; Pfeiffer, Andreas; Pierini, Maurizio; Pimiä, Martti; Piparo, Danilo; Polese, Giovanni; Quertenmont, Loic; Racz, Attila; Reece, William; Rodrigues Antunes, Joao; Rolandi, Gigi; Rovelli, Chiara; Rovere, Marco; Sakulin, Hannes; Santanastasio, Francesco; Schäfer, Christoph; Schwick, Christoph; Segoni, Ilaria; Sekmen, Sezen; Sharma, Archana; Siegrist, Patrice; Silva, Pedro; Simon, Michal; Sphicas, Paraskevas; Spiga, Daniele; Tsirou, Andromachi; Veres, Gabor Istvan; Vlimant, Jean-Roch; Wöhri, Hermine Katharina; Worm, Steven; Zeuner, Wolfram Dietrich; Bertl, Willi; Deiters, Konrad; Erdmann, Wolfram; Gabathuler, Kurt; Horisberger, Roland; Ingram, Quentin; Kaestli, Hans-Christian; König, Stefan; Kotlinski, Danek; Langenegger, Urs; Meier, Frank; Renker, Dieter; Rohe, Tilman; Bäni, Lukas; Bortignon, Pierluigi; Buchmann, Marco-Andrea; Casal, Bruno; Chanon, Nicolas; Deisher, Amanda; Dissertori, Günther; Dittmar, Michael; Donegà, Mauro; Dünser, Marc; Eugster, Jürg; Freudenreich, Klaus; Grab, Christoph; Hits, Dmitry; Lecomte, Pierre; Lustermann, Werner; Marini, Andrea Carlo; Martinez Ruiz del Arbol, Pablo; Mohr, Niklas; Moortgat, Filip; Nägeli, Christoph; Nef, Pascal; Nessi-Tedaldi, Francesca; Pandolfi, Francesco; Pape, Luc; Pauss, Felicitas; Peruzzi, Marco; Ronga, Frederic Jean; Rossini, Marco; Sala, Leonardo; Sanchez, Ann - Karin; Starodumov, Andrei; Stieger, Benjamin; Takahashi, Maiko; Tauscher, Ludwig; Thea, Alessandro; Theofilatos, Konstantinos; Treille, Daniel; Urscheler, Christina; Wallny, Rainer; Weber, Hannsjoerg Artur; Wehrli, Lukas; Amsler, Claude; Chiochia, Vincenzo; De Visscher, Simon; Favaro, Carlotta; Ivova Rikova, Mirena; Millan Mejias, Barbara; Otiougova, Polina; Robmann, Peter; Snoek, Hella; Tupputi, Salvatore; Verzetti, Mauro; Chang, Yuan-Hann; Chen, Kuan-Hsin; Kuo, Chia-Ming; Li, Syue-Wei; Lin, Willis; Liu, Zong-Kai; Lu, Yun-Ju; Mekterovic, Darko; Singh, Anil; Volpe, Roberta; Yu, Shin-Shan; Bartalini, Paolo; Chang, Paoti; Chang, You-Hao; Chang, Yu-Wei; Chao, Yuan; Chen, Kai-Feng; Dietz, Charles; Grundler, Ulysses; Hou, George Wei-Shu; Hsiung, Yee; Kao, Kai-Yi; Lei, Yeong-Jyi; Lu, Rong-Shyang; Majumder, Devdatta; Petrakou, Eleni; Shi, Xin; Shiu, Jing-Ge; Tzeng, Yeng-Ming; Wan, Xia; Wang, Minzu; Asavapibhop, Burin; Srimanobhas, Norraphat; Adiguzel, Aytul; Bakirci, Mustafa Numan; Cerci, Salim; Dozen, Candan; Dumanoglu, Isa; Eskut, Eda; Girgis, Semiray; Gokbulut, Gul; Gurpinar, Emine; Hos, Ilknur; Kangal, Evrim Ersin; Karaman, Turker; Karapinar, Guler; Kayis Topaksu, Aysel; Onengut, Gulsen; Ozdemir, Kadri; Ozturk, Sertac; Polatoz, Ayse; Sogut, Kenan; Sunar Cerci, Deniz; Tali, Bayram; Topakli, Huseyin; Vergili, Latife Nukhet; Vergili, Mehmet; Akin, Ilina Vasileva; Aliev, Takhmasib; Bilin, Bugra; Bilmis, Selcuk; Deniz, Muhammed; Gamsizkan, Halil; Guler, Ali Murat; Ocalan, Kadir; Ozpineci, Altug; Serin, Meltem; Sever, Ramazan; Surat, Ugur Emrah; Yalvac, Metin; Yildirim, Eda; Zeyrek, Mehmet; Gülmez, Erhan; Isildak, Bora; Kaya, Mithat; Kaya, Ozlem; Ozkorucuklu, Suat; Sonmez, Nasuf; Cankocak, Kerem; Levchuk, Leonid; Brooke, James John; Clement, Emyr; Cussans, David; Flacher, Henning; Frazier, Robert; Goldstein, Joel; Grimes, Mark; Heath, Greg P; Heath, Helen F; Kreczko, Lukasz; Metson, Simon; Newbold, Dave M; Nirunpong, Kachanon; Poll, Anthony; Senkin, Sergey; Smith, Vincent J; Williams, Thomas; Basso, Lorenzo; Bell, Ken W; Belyaev, Alexander; Brew, Christopher; Brown, Robert M; Cockerill, David JA; Coughlan, John A; Harder, Kristian; Harper, Sam; Jackson, James; Kennedy, Bruce W; Olaiya, Emmanuel; Petyt, David; Radburn-Smith, Benjamin Charles; Shepherd-Themistocleous, Claire; Tomalin, Ian R; Womersley, William John; Bainbridge, Robert; Ball, Gordon; Beuselinck, Raymond; Buchmuller, Oliver; Colling, David; Cripps, Nicholas; Cutajar, Michael; Dauncey, Paul; Davies, Gavin; Della Negra, Michel; Ferguson, William; Fulcher, Jonathan; Futyan, David; Gilbert, Andrew; Guneratne Bryer, Arlo; Hall, Geoffrey; Hatherell, Zoe; Hays, Jonathan; Iles, Gregory; Jarvis, Martyn; Karapostoli, Georgia; Lyons, Louis; Magnan, Anne-Marie; Marrouche, Jad; Mathias, Bryn; Nandi, Robin; Nash, Jordan; Nikitenko, Alexander; Papageorgiou, Anastasios; Pela, Joao; Pesaresi, Mark; Petridis, Konstantinos; Pioppi, Michele; Raymond, David Mark; Rogerson, Samuel; Rose, Andrew; Ryan, Matthew John; Seez, Christopher; Sharp, Peter; Sparrow, Alex; Stoye, Markus; Tapper, Alexander; Vazquez Acosta, Monica; Virdee, Tejinder; Wakefield, Stuart; Wardle, Nicholas; Whyntie, Tom; Chadwick, Matthew; Cole, Joanne; Hobson, Peter R; Khan, Akram; Kyberd, Paul; Leggat, Duncan; Leslie, Dawn; Martin, William; Reid, Ivan; Symonds, Philip; Teodorescu, Liliana; Turner, Mark; Hatakeyama, Kenichi; Liu, Hongxuan; Scarborough, Tara; Charaf, Otman; Henderson, Conor; Rumerio, Paolo; Avetisyan, Aram; Bose, Tulika; Fantasia, Cory; Heister, Arno; St John, Jason; Lawson, Philip; Lazic, Dragoslav; Rohlf, James; Sperka, David; Sulak, Lawrence; Alimena, Juliette; Bhattacharya, Saptaparna; Cutts, David; Demiragli, Zeynep; Ferapontov, Alexey; Garabedian, Alex; Heintz, Ulrich; Jabeen, Shabnam; Kukartsev, Gennadiy; Laird, Edward; Landsberg, Greg; Luk, Michael; Narain, Meenakshi; Nguyen, Duong; Segala, Michael; Sinthuprasith, Tutanon; Speer, Thomas; Tsang, Ka Vang; Breedon, Richard; Breto, Guillermo; Calderon De La Barca Sanchez, Manuel; Chauhan, Sushil; Chertok, Maxwell; Conway, John; Conway, Rylan; Cox, Peter Timothy; Dolen, James; Erbacher, Robin; Gardner, Michael; Houtz, Rachel; Ko, Winston; Kopecky, Alexandra; Lander, Richard; Mall, Orpheus; Miceli, Tia; Pellett, Dave; Ricci-Tam, Francesca; Rutherford, Britney; Searle, Matthew; Smith, John; Squires, Michael; Tripathi, Mani; Vasquez Sierra, Ricardo; Yohay, Rachel; Andreev, Valeri; Cline, David; Cousins, Robert; Duris, Joseph; Erhan, Samim; Everaerts, Pieter; Farrell, Chris; Hauser, Jay; Ignatenko, Mikhail; Jarvis, Chad; Plager, Charles; Rakness, Gregory; Schlein, Peter; Traczyk, Piotr; Valuev, Vyacheslav; Weber, Matthias; Babb, John; Clare, Robert; Dinardo, Mauro Emanuele; Ellison, John Anthony; Gary, J William; Giordano, Ferdinando; Hanson, Gail; Jeng, Geng-Yuan; Liu, Hongliang; Long, Owen Rosser; Luthra, Arun; Nguyen, Harold; Paramesvaran, Sudarshan; Sturdy, Jared; Sumowidagdo, Suharyo; Wilken, Rachel; Wimpenny, Stephen; Andrews, Warren; Branson, James G; Cerati, Giuseppe Benedetto; Cittolin, Sergio; Evans, David; Golf, Frank; Holzner, André; Kelley, Ryan; Lebourgeois, Matthew; Letts, James; Macneill, Ian; Mangano, Boris; Padhi, Sanjay; Palmer, Christopher; Petrucciani, Giovanni; Pieri, Marco; Sani, Matteo; Sharma, Vivek; Simon, Sean; Sudano, Elizabeth; Tadel, Matevz; Tu, Yanjun; Vartak, Adish; Wasserbaech, Steven; Würthwein, Frank; Yagil, Avraham; Yoo, Jaehyeok; Barge, Derek; Bellan, Riccardo; Campagnari, Claudio; D'Alfonso, Mariarosaria; Danielson, Thomas; Flowers, Kristen; Geffert, Paul; Incandela, Joe; Justus, Christopher; Kalavase, Puneeth; Koay, Sue Ann; Kovalskyi, Dmytro; Krutelyov, Vyacheslav; Lowette, Steven; Mccoll, Nickolas; Pavlunin, Viktor; Rebassoo, Finn; Ribnik, Jacob; Richman, Jeffrey; Rossin, Roberto; Stuart, David; To, Wing; West, Christopher; Apresyan, Artur; Bornheim, Adolf; Chen, Yi; Di Marco, Emanuele; Duarte, Javier; Gataullin, Marat; Ma, Yousi; Mott, Alexander; Newman, Harvey B; Rogan, Christopher; Spiropulu, Maria; Timciuc, Vladlen; Veverka, Jan; Wilkinson, Richard; Xie, Si; Yang, Yong; Zhu, Ren-Yuan; Akgun, Bora; Azzolini, Virginia; Calamba, Aristotle; Carroll, Ryan; Ferguson, Thomas; Iiyama, Yutaro; Jang, Dong Wook; Liu, Yueh-Feng; Paulini, Manfred; Vogel, Helmut; Vorobiev, Igor; Cumalat, John Perry; Drell, Brian Robert; Ford, William T; Gaz, Alessandro; Luiggi Lopez, Eduardo; Smith, James; Stenson, Kevin; Ulmer, Keith; Wagner, Stephen Robert; Alexander, James; Chatterjee, Avishek; Eggert, Nicholas; Gibbons, Lawrence Kent; Heltsley, Brian; Khukhunaishvili, Aleko; Kreis, Benjamin; Mirman, Nathan; Nicolas Kaufman, Gala; Patterson, Juliet Ritchie; Ryd, Anders; Salvati, Emmanuele; Sun, Werner; Teo, Wee Don; Thom, Julia; Thompson, Joshua; Tucker, Jordan; Vaughan, Jennifer; Weng, Yao; Winstrom, Lucas; Wittich, Peter; Winn, Dave; Abdullin, Salavat; Albrow, Michael; Anderson, Jacob; Bauerdick, Lothar AT; Beretvas, Andrew; Berryhill, Jeffrey; Bhat, Pushpalatha C; Bloch, Ingo; Burkett, Kevin; Butler, Joel Nathan; Chetluru, Vasundhara; Cheung, Harry; Chlebana, Frank; Elvira, Victor Daniel; Fisk, Ian; Freeman, Jim; Gao, Yanyan; Green, Dan; Gutsche, Oliver; Hanlon, Jim; Harris, Robert M; Hirschauer, James; Hooberman, Benjamin; Jindariani, Sergo; Johnson, Marvin; Joshi, Umesh; Kilminster, Benjamin; Klima, Boaz; Kunori, Shuichi; Kwan, Simon; Leonidopoulos, Christos; Linacre, Jacob; Lincoln, Don; Lipton, Ron; Lykken, Joseph; Maeshima, Kaori; Marraffino, John Michael; Maruyama, Sho; Mason, David; McBride, Patricia; Mishra, Kalanand; Mrenna, Stephen; Musienko, Yuri; Newman-Holmes, Catherine; O'Dell, Vivian; Prokofyev, Oleg; Sexton-Kennedy, Elizabeth; Sharma, Seema; Spalding, William J; Spiegel, Leonard; Taylor, Lucas; Tkaczyk, Slawek; Tran, Nhan Viet; Uplegger, Lorenzo; Vaandering, Eric Wayne; Vidal, Richard; Whitmore, Juliana; Wu, Weimin; Yang, Fan; Yumiceva, Francisco; Yun, Jae Chul; Acosta, Darin; Avery, Paul; Bourilkov, Dimitri; Chen, Mingshui; Cheng, Tongguang; Das, Souvik; De Gruttola, Michele; Di Giovanni, Gian Piero; Dobur, Didar; Drozdetskiy, Alexey; Field, Richard D; Fisher, Matthew; Fu, Yu; Furic, Ivan-Kresimir; Gartner, Joseph; Hugon, Justin; Kim, Bockjoo; Konigsberg, Jacobo; Korytov, Andrey; Kropivnitskaya, Anna; Kypreos, Theodore; Low, Jia Fu; Matchev, Konstantin; Milenovic, Predrag; Mitselmakher, Guenakh; Muniz, Lana; Park, Myeonghun; Remington, Ronald; Rinkevicius, Aurelijus; Sellers, Paul; Skhirtladze, Nikoloz; Snowball, Matthew; Yelton, John; Zakaria, Mohammed; Gaultney, Vanessa; Hewamanage, Samantha; Lebolo, Luis Miguel; Linn, Stephan; Markowitz, Pete; Martinez, German; Rodriguez, Jorge Luis; Adams, Todd; Askew, Andrew; Bochenek, Joseph; Chen, Jie; Diamond, Brendan; Gleyzer, Sergei V; Haas, Jeff; Hagopian, Sharon; Hagopian, Vasken; Jenkins, Merrill; Johnson, Kurtis F; Prosper, Harrison; Veeraraghavan, Venkatesh; Weinberg, Marc; Baarmand, Marc M; Dorney, Brian; Hohlmann, Marcus; Kalakhety, Himali; Vodopiyanov, Igor; Adams, Mark Raymond; Anghel, Ioana Maria; Apanasevich, Leonard; Bai, Yuting; Bazterra, Victor Eduardo; Betts, Russell Richard; Bucinskaite, Inga; Callner, Jeremy; Cavanaugh, Richard; Evdokimov, Olga; Gauthier, Lucie; Gerber, Cecilia Elena; Hofman, David Jonathan; Khalatyan, Samvel; Lacroix, Florent; Malek, Magdalena; O'Brien, Christine; Silkworth, Christopher; Strom, Derek; Turner, Paul; Varelas, Nikos; Akgun, Ugur; Albayrak, Elif Asli; Bilki, Burak; Clarida, Warren; Duru, Firdevs; Merlo, Jean-Pierre; Mermerkaya, Hamit; Mestvirishvili, Alexi; Moeller, Anthony; Nachtman, Jane; Newsom, Charles Ray; Norbeck, Edwin; Onel, Yasar; Ozok, Ferhat; Sen, Sercan; Tan, Ping; Tiras, Emrah; Wetzel, James; Yetkin, Taylan; Yi, Kai; Barnett, Bruce Arnold; Blumenfeld, Barry; Bolognesi, Sara; Fehling, David; Giurgiu, Gavril; Gritsan, Andrei; Guo, Zijin; Hu, Guofan; Maksimovic, Petar; Rappoccio, Salvatore; Swartz, Morris; Whitbeck, Andrew; Baringer, Philip; Bean, Alice; Benelli, Gabriele; Kenny Iii, Raymond Patrick; Murray, Michael; Noonan, Daniel; Sanders, Stephen; Stringer, Robert; Tinti, Gemma; Wood, Jeffrey Scott; Zhukova, Victoria; Barfuss, Anne-Fleur; Bolton, Tim; Chakaberia, Irakli; Ivanov, Andrew; Khalil, Sadia; Makouski, Mikhail; Maravin, Yurii; Shrestha, Shruti; Svintradze, Irakli; Gronberg, Jeffrey; Lange, David; Wright, Douglas; Baden, Drew; Boutemeur, Madjid; Calvert, Brian; Eno, Sarah Catherine; Gomez, Jaime; Hadley, Nicholas John; Kellogg, Richard G; Kirn, Malina; Kolberg, Ted; Lu, Ying; Marionneau, Matthieu; Mignerey, Alice; Pedro, Kevin; Skuja, Andris; Temple, Jeffrey; Tonjes, Marguerite; Tonwar, Suresh C; Twedt, Elizabeth; Apyan, Aram; Bauer, Gerry; Bendavid, Joshua; Busza, Wit; Butz, Erik; Cali, Ivan Amos; Chan, Matthew; Dutta, Valentina; Gomez Ceballos, Guillelmo; Goncharov, Maxim; Hahn, Kristan Allan; Kim, Yongsun; Klute, Markus; Krajczar, Krisztian; Luckey, Paul David; Ma, Teng; Nahn, Steve; Paus, Christoph; Ralph, Duncan; Roland, Christof; Roland, Gunther; Rudolph, Matthew; Stephans, George; Stöckli, Fabian; Sumorok, Konstanty; Sung, Kevin; Velicanu, Dragos; Wenger, Edward Allen; Wolf, Roger; Wyslouch, Bolek; Yang, Mingming; Yilmaz, Yetkin; Yoon, Sungho; Zanetti, Marco; Cooper, Seth; Dahmes, Bryan; De Benedetti, Abraham; Franzoni, Giovanni; Gude, Alexander; Kao, Shih-Chuan; Klapoetke, Kevin; Kubota, Yuichi; Mans, Jeremy; Pastika, Nathaniel; Rusack, Roger; Sasseville, Michael; Singovsky, Alexander; Tambe, Norbert; Turkewitz, Jared; Cremaldi, Lucien Marcus; Kroeger, Rob; Perera, Lalith; Rahmat, Rahmat; Sanders, David A; Avdeeva, Ekaterina; Bloom, Kenneth; Bose, Suvadeep; Claes, Daniel R; Dominguez, Aaron; Eads, Michael; Keller, Jason; Kravchenko, Ilya; Lazo-Flores, Jose; Malbouisson, Helena; Malik, Sudhir; Snow, Gregory R; Godshalk, Andrew; Iashvili, Ia; Jain, Supriya; Kharchilava, Avto; Kumar, Ashish; Alverson, George; Barberis, Emanuela; Baumgartel, Darin; Chasco, Matthew; Haley, Joseph; Nash, David; Trocino, Daniele; Wood, Darien; Zhang, Jinzhong; Anastassov, Anton; Kubik, Andrew; Lusito, Letizia; Mucia, Nicholas; Odell, Nathaniel; Ofierzynski, Radoslaw Adrian; Pollack, Brian; Pozdnyakov, Andrey; Schmitt, Michael Henry; Stoynev, Stoyan; Velasco, Mayda; Won, Steven; Antonelli, Louis; Berry, Douglas; Brinkerhoff, Andrew; Chan, Kwok Ming; Hildreth, Michael; Jessop, Colin; Karmgard, Daniel John; Kolb, Jeff; Lannon, Kevin; Luo, Wuming; Lynch, Sean; Marinelli, Nancy; Morse, David Michael; Pearson, Tessa; Planer, Michael; Ruchti, Randy; Slaunwhite, Jason; Valls, Nil; Wayne, Mitchell; Wolf, Matthias; Bylsma, Ben; Durkin, Lloyd Stanley; Hill, Christopher; Hughes, Richard; Kotov, Khristian; Ling, Ta-Yung; Puigh, Darren; Rodenburg, Marissa; Vuosalo, Carl; Williams, Grayson; Winer, Brian L; Adam, Nadia; Berry, Edmund; Elmer, Peter; Gerbaudo, Davide; Halyo, Valerie; Hebda, Philip; Hegeman, Jeroen; Hunt, Adam; Jindal, Pratima; Lopes Pegna, David; Lujan, Paul; Marlow, Daniel; Medvedeva, Tatiana; Mooney, Michael; Olsen, James; Piroué, Pierre; Quan, Xiaohang; Raval, Amita; Safdi, Ben; Saka, Halil; Stickland, David; Tully, Christopher; Werner, Jeremy Scott; Zuranski, Andrzej; Brownson, Eric; Lopez, Angel; Mendez, Hector; Ramirez Vargas, Juan Eduardo; Alagoz, Enver; Barnes, Virgil E; Benedetti, Daniele; Bolla, Gino; Bortoletto, Daniela; De Mattia, Marco; Everett, Adam; Hu, Zhen; Jones, Matthew; Koybasi, Ozhan; Kress, Matthew; Laasanen, Alvin T; Leonardo, Nuno; Maroussov, Vassili; Merkel, Petra; Miller, David Harry; Neumeister, Norbert; Shipsey, Ian; Silvers, David; Svyatkovskiy, Alexey; Vidal Marono, Miguel; Yoo, Hwi Dong; Zablocki, Jakub; Zheng, Yu; Guragain, Samir; Parashar, Neeti; Adair, Antony; Boulahouache, Chaouki; Ecklund, Karl Matthew; Geurts, Frank JM; Li, Wei; Padley, Brian Paul; Redjimi, Radia; Roberts, Jay; Zabel, James; Betchart, Burton; Bodek, Arie; Chung, Yeon Sei; Covarelli, Roberto; de Barbaro, Pawel; Demina, Regina; Eshaq, Yossof; Ferbel, Thomas; Garcia-Bellido, Aran; Goldenzweig, Pablo; Han, Jiyeon; Harel, Amnon; Miner, Daniel Carl; Vishnevskiy, Dmitry; Zielinski, Marek; Bhatti, Anwar; Ciesielski, Robert; Demortier, Luc; Goulianos, Konstantin; Lungu, Gheorghe; Malik, Sarah; Mesropian, Christina; Arora, Sanjay; Barker, Anthony; Chou, John Paul; Contreras-Campana, Christian; Contreras-Campana, Emmanuel; Duggan, Daniel; Ferencek, Dinko; Gershtein, Yuri; Gray, Richard; Halkiadakis, Eva; Hidas, Dean; Lath, Amitabh; Panwalkar, Shruti; Park, Michael; Patel, Rishi; Rekovic, Vladimir; Robles, Jorge; Rose, Keith; Salur, Sevil; Schnetzer, Steve; Seitz, Claudia; Somalwar, Sunil; Stone, Robert; Thomas, Scott; Walker, Matthew; Cerizza, Giordano; Hollingsworth, Matthew; Spanier, Stefan; Yang, Zong-Chang; York, Andrew; Eusebi, Ricardo; Flanagan, Will; Gilmore, Jason; Kamon, Teruki; Khotilovich, Vadim; Montalvo, Roy; Osipenkov, Ilya; Pakhotin, Yuriy; Perloff, Alexx; Roe, Jeffrey; Safonov, Alexei; Sakuma, Tai; Sengupta, Sinjini; Suarez, Indara; Tatarinov, Aysen; Toback, David; Akchurin, Nural; Damgov, Jordan; Dragoiu, Cosmin; Dudero, Phillip Russell; Jeong, Chiyoung; Kovitanggoon, Kittikul; Lee, Sung Won; Libeiro, Terence; Roh, Youn; Volobouev, Igor; Appelt, Eric; Delannoy, Andrés G; Florez, Carlos; Greene, Senta; Gurrola, Alfredo; Johns, Willard; Kurt, Pelin; Maguire, Charles; Melo, Andrew; Sharma, Monika; Sheldon, Paul; Snook, Benjamin; Tuo, Shengquan; Velkovska, Julia; Arenton, Michael Wayne; Balazs, Michael; Boutle, Sarah; Cox, Bradley; Francis, Brian; Goodell, Joseph; Hirosky, Robert; Ledovskoy, Alexander; Lin, Chuanzhe; Neu, Christopher; Wood, John; Gollapinni, Sowjanya; Harr, Robert; Karchin, Paul Edmund; Kottachchi Kankanamge Don, Chamath; Lamichhane, Pramod; Sakharov, Alexandre; Anderson, Michael; Belknap, Donald; Borrello, Laura; Carlsmith, Duncan; Cepeda, Maria; Dasu, Sridhara; Friis, Evan; Gray, Lindsey; Grogg, Kira Suzanne; Grothe, Monika; Hall-Wilton, Richard; Herndon, Matthew; Hervé, Alain; Klabbers, Pamela; Klukas, Jeffrey; Lanaro, Armando; Lazaridis, Christos; Leonard, Jessica; Loveless, Richard; Mohapatra, Ajit; Ojalvo, Isabel; Palmonari, Francesco; Pierro, Giuseppe Antonio; Ross, Ian; Savin, Alexander; Smith, Wesley H; Swanson, Joshua

2013-11-04

Results are reported from a search for non-standard-model Higgs boson decays to pairs of new light bosons, each of which decays into the oppositely charged dimuon final state. The new bosons may be produced either promptly or via a decay chain. The data set corresponds to an integrated luminosity of 5.3 inverse femtobarns of proton-proton collisions at $\\sqrt{s}$ = 7 TeV, recorded by the CMS experiment at the LHC. Such Higgs boson decays are predicted in several scenarios of new physics, including supersymmetric models with extended Higgs sectors or hidden valleys. Thus, the results of the search are relevant for establishing whether the new particle observed in Higgs boson searches at the LHC has the properties expected for a standard model Higgs boson. No excess of events is observed with respect to the yields expected from standard model processes. A model-independent upper limit of 0.78 +/- 0.05 fb on the product of the cross section times branching fraction times acceptance is obtained. The results are a...

Search for heavy resonances in diboson final states with the CMS detector at LHC

Energy Technology Data Exchange (ETDEWEB)

Esch, Thomas; Hebbeker, Thomas; Hoepfner, Kerstin; Mukherjee, Swagata [Physics Institute III A, RWTH Aachen University (Germany)

2016-07-01

The search strategy for heavy resonances decaying to a pair of bosons in proton-proton collisions in the CMS detector at LHC is presented. Several New Physics scenarios including the recently proposed heavy vector triplet (HVT) simplified model predict the existence of Beyond Standard Model (BSM) resonances that have enhanced couplings to boson pairs. This search is particularly challenging, since for large resonance masses the two bosons are boosted and the final decay products are difficult to separate. This requires the development and use of dedicated techniques such as special tau reconstruction and lepton isolation approaches. In the absence of a significant deviation from the Standard Model expectation, upper limits are set on the signal cross section times branching ratio for the HVT signal model.

FASB (Financial Accounting Standards Board) proposal changes retiree healthcare benefit accounting.

Science.gov (United States)

Grimaldi, P L; Bertko, J M

1989-07-01

The Financial Accounting Standards Board (FASB) recently issued an exposure draft (ED) of a standard that would change the way organizations account for their employees' post-retirement healthcare benefits. According to the ED, organizations would have to switch from cash accounting to accrual accounting for post-retirement benefits as well as record their retiree healthcare liabilities on their balance sheets by 1992.

[The Purpose of Medical Education: Proposal to Standardize a System of Credits for Medical Specializations Programs].

Science.gov (United States)

Cañar, Carlos Andrés Pineda

2012-01-01

This article analyzes the concept of an academic credit system and proposes a way to systematize medical specialization programs. The credit system is a way to recognize and standardize the total time that a student must devote to their training. Thus, a credit equal to a certain number of hours of classroom training and independent activities is proposed. An educational program is expressed in the number of credits needed for the whole training process to achieve the competencies expected. A review of the concept of competition in education is also performed. The introduction of the term and its relation to the need to measure performance in future professionals according to labor market needs is identified. A critical discussion about skills defining the different types of skills in the educational field is later discussed. Subsequently, the Colombian regulatory framework is presented concerning the powers, in particular, Decree 1295 of 2010, which defines one academic credit equal to 48 hours in a semester, of which 16 hours are classroom and 32 hours are independent study. A tor of the major milestones in the history of medical education is later made. The structure of credits and contact hours, independent of postgraduate psychiatry in the country is reviewed showing the heterogeneity in their approach. The proposal is presented, defining the types of classroom activities and how to calculate the hours of independent study by type of classroom activity. Copyright © 2012 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

Information and Communication Technology (ICT) Standards and Guidelines. Final rule.

Science.gov (United States)

2017-01-18

We, the Architectural and Transportation Barriers Compliance Board (Access Board or Board), are revising and updating, in a single rulemaking, our standards for electronic and information technology developed, procured, maintained, or used by Federal agencies covered by section 508 of the Rehabilitation Act of 1973, as well as our guidelines for telecommunications equipment and customer premises equipment covered by Section 255 of the Communications Act of 1934. The revisions and updates to the section 508-based standards and section 255-based guidelines are intended to ensure that information and communication technology covered by the respective statutes is accessible to and usable by individuals with disabilities.

Study of elevated temperature design standard against thermal loads

International Nuclear Information System (INIS)

Kasahara, Naoto; Asayama, Tai; Morishita, Masaki

2001-01-01

Elevated temperature components must be designed against both pressure and thermal loads. In the case of sodium circuits of fast breeder reactors, a restriction from the pressure load becomes small because of the high boiling point of sodium. Design approaches for thermal loads (displacement-controlled) are compared with those against pressure loads (load-controlled). Considering differences between those two approaches, a concept of the elevated temperature design standard that takes the nature of thermal loads fully into account is proposed. This concept is a basis of load evaluation techniques and an inelastic analysis guide, that are being developed. Finally, problems and plans to realize the above concept are discussed. (author)

Proposal of programming standards for a computerized protection system

International Nuclear Information System (INIS)

Ehrenberger, W.; Voges, U.

1975-05-01

In process computer systems with high safety and reliability requirements, correctness of the software has to be proved. During the development of a program specific guidelines should be met in order to facilitate the verification of its correctness. This paper is a collection of relevant proposals. (orig.) [de

A guide for determining compliance with the Clean Air Act Standards for radionuclide emissions from NRC-licensed and non-DOE federal facilities (Rev. 1)

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-10-01

The Environmental Protection Agency (EPA) issued standards under Section 112 of the Clean Air Act of February 6, 1985 that limit airborne emissions of radionuclides to the atmosphere. In February 1989 these standards were re proposed , and in November 1989 final standards may be promulgated. This document provides guidance for determining compliance with one of the National Emissions for Hazardous Air Pollutants covering facilities that are licensed by NRC, and federal facilities not operated by the DOE, that could emit radionuclides to the ai00.

Periodontics II: Course Proposal.

Science.gov (United States)

Dordick, Bruce

A proposal is presented for Periodontics II, a course offered at the Community College of Philadelphia to give the dental hygiene/assisting student an understanding of the disease states of the periodontium and their treatment. A standardized course proposal cover form is given, followed by a statement of purpose for the course, a list of major…

Final design proposal: Theta Group-The Hotbox. A proposal in response to a commercial air transportation study

Science.gov (United States)

1991-01-01

The Hotbox is a 40 passenger commercial aircraft designed to have a minimum range of 5500 ft and cruise at a velocity of 30 ft/sec. The aircraft is designed to serve the longer range overseas market in Aeroworld. In order to serve all the airports in the overseas market, the Hotbox was required to be able to use a five foot gate. A weight requirement was set a 4.5 lbs in order to maximize aircraft efficiency. Finally, a single engine system was chosen because it minimized system weight, complexity and cost. The Hotbox is estimated to cost $152,000 Aeroworld dollars and will sell for $200.000. The propulsion system for the Hotbox consists of a nose mounted Astro 15 electric powered motor and a Top Flight 12-6 propeller. A Spica airfoil was selected for the Hotbox based on the ease of construction of its flat bottom and its positive lift and drag characteristics. A fuselage of rectangular cross section will internally contain the propulsion system, control system, and a passenger bay with 2x20 seating. A combination of directional and longitudinal control will enable the Hotbox to maneuver. The final design of the Hotbox provides for takeoff distance in 26.5 ft and normal cruise range of 17,000 ft.

C-Band Airport Surface Communications System Standards Development. Phase II Final Report. Volume 2: Test Bed Performance Evaluation and Final AeroMACS Recommendations

Science.gov (United States)

Hall, Edward; Magner, James

2011-01-01

This report is provided as part of ITT s NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: New ATM Requirements-Future Communications, C-Band and L-Band Communications Standard Development and was based on direction provided by FAA project-level agreements for New ATM Requirements-Future Communications. Task 7 included two subtasks. Subtask 7-1 addressed C-band (5091- to 5150-MHz) airport surface data communications standards development, systems engineering, test bed and prototype development, and tests and demonstrations to establish operational capability for the Aeronautical Mobile Airport Communications System (AeroMACS). Subtask 7-2 focused on systems engineering and development support of the L-band digital aeronautical communications system (L-DACS). Subtask 7-1 consisted of two phases. Phase I included development of AeroMACS concepts of use, requirements, architecture, and initial high-level safety risk assessment. Phase II builds on Phase I results and is presented in two volumes. Volume I is devoted to concepts of use, system requirements, and architecture, including AeroMACS design considerations. Volume II (this document) describes an AeroMACS prototype evaluation and presents final AeroMACS recommendations. This report also describes airport categorization and channelization methodologies. The purposes of the airport categorization task were (1) to facilitate initial AeroMACS architecture designs and enable budgetary projections by creating a set of airport categories based on common airport characteristics and design objectives, and (2) to offer high-level guidance to potential AeroMACS technology and policy development sponsors and service providers. A channelization plan methodology was developed because a common global methodology is needed to assure seamless interoperability among diverse AeroMACS services potentially supplied by multiple service providers.

NREL Topic 1 Final Report: Cohesive Application of Standards-Based Connected Devices to Enable Clean Energy Technologies

Energy Technology Data Exchange (ETDEWEB)

Hudgins, Andrew P. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sparn, Bethany F. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jin, Xin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Seal, Brian [Electric Power Research Inst. (EPRI), Palo Alto, CA (United States)

2018-02-21

This document is the final report of a two-year development, test, and demonstration project entitled 'Cohesive Application of Standards-Based Connected Devices to Enable Clean Energy Technologies.' The project was part of the National Renewable Energy Laboratory's (NREL) Integrated Network Test-bed for Energy Grid Research and Technology (INTEGRATE) initiative. The Electric Power Research Institute (EPRI) and a team of partners were selected by NREL to carry out a project to develop and test how smart, connected consumer devices can act to enable the use of more clean energy technologies on the electric power grid. The project team includes a set of leading companies that produce key products in relation to achieving this vision: thermostats, water heaters, pool pumps, solar inverters, electric vehicle supply equipment, and battery storage systems. A key requirement of the project was open access at the device level - a feature seen as foundational to achieving a future of widespread distributed generation and storage. The internal intelligence, standard functionality and communication interfaces utilized in this project result in the ability to integrate devices at any level, to work collectively at the level of the home/business, microgrid, community, distribution circuit or other. Collectively, the set of products serve as a platform on which a wide range of control strategies may be developed and deployed.

Beyond the standard model

International Nuclear Information System (INIS)

Wilczek, F.

1993-01-01

The standard model of particle physics is highly successful, although it is obviously not a complete or final theory. In this presentation the author argues that the structure of the standard model gives some quite concrete, compelling hints regarding what lies beyond. Essentially, this presentation is a record of the author's own judgement of what the central clues for physics beyond the standard model are, and also it is an attempt at some pedagogy. 14 refs., 6 figs

KEY COMPARISON: Final report of APMP.T-K6 (original name APMP-IC-1-97): Comparison of humidity measurements using a dew point meter as a transfer standard

Science.gov (United States)

Li, Wang; Takahashi, C.; Hussain, F.; Hong, Yi; Nham, H. S.; Chan, K. H.; Lee, L. T.; Chahine, K.

2007-01-01

This APMP key comparison of humidity measurements using a dew point meter as a transfer standard was carried out among eight national metrology institutes from February 1999 to January 2001. The NMC/SPRING, Singapore was the pilot laboratory and a chilled mirror dew point meter offered by NMIJ was used as a transfer standard. The transfer standard was calibrated by each participating institute against local humidity standards in terms of frost and dew point temperature. Each institute selected its frost/dew point temperature calibration points within the range from -70 °C to 20 °C frost/dew point with 5 °C step. The majority of participating institutes measured from -60 °C to 20 °C frost/dew point and a simple mean evaluation was performed in this range. The differences between the institute values and the simple means for all participating institutes are within two standard deviations from the mean values. Bilateral equivalence was analysed in terms of pair difference and single parameter Quantified Demonstrated Equivalence. The results are presented in the report. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCT, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).

Developing an ANSI [American National Standards Institute] standard for semitrailers used to transport radioactive materials

International Nuclear Information System (INIS)

Gregory, P.

1990-01-01

A proposed new American National Standards Institute (ANSI) standard has been prepared which establishes requirements for the design, fabrication, and maintenance of semitrailers used in the highway transport of weight-concentrated radioactive loads. A weight-concentrated load is any payload which exceeds 1,488 kilograms per lineal meter (1,000 lb/ft) over any portion of the semitrailer. The proposed standard also provides detailed procedures for in-service inspections, as well as requirements for testing and quality assurance. The standard addresses only semitrailers, excluding the tractor. Trailers already in service may be certified as complying with the standard if they meet the requirements of the standard. This standard is intended to provide guidance and acceptance criteria needed to establish a uniform minimum level of performance for the designer, manufacturer, owner, operator, and shipper. This standard is not intended to apply to special, non-routine shipments of a one-time or occasional nature which require special permitting. The background and history of the standard are traced and a summary discussion of the standard is provided in this article

75 FR 66734 - Proposed Voluntary Product Standard PS 2-10, Structural Plywood

Science.gov (United States)

2010-10-29

... acceptability of wood-based structural-use panels for construction sheathing and single-floor applications. It... acceptability of wood-based structural-use panels for construction sheathing and single- floor application, and... to Voluntary Product Standard (PS) 2-04, Performance Standard for Wood-Based Structural-Use Panels...

Environmental radiation standards

International Nuclear Information System (INIS)

Kocher, D.C.

1987-01-01

This document contains an outline of an oral presentation on environmental radiation standards presented to the American Nuclear Societies' Topical Conference on Population Exposure from the Nuclear Fuel Cycle. The paper contains several definitions, a summary of current radiation exposure limits; and numerous proposed changes to current standards. 7 figs

New clinical validation method for automated sphygmomanometer: a proposal by Japan ISO-WG for sphygmomanometer standard.

Science.gov (United States)

Shirasaki, Osamu; Asou, Yosuke; Takahashi, Yukio

2007-12-01

Owing to fast or stepwise cuff deflation, or measuring at places other than the upper arm, the clinical accuracy of most recent automated sphygmomanometers (auto-BPMs) cannot be validated by one-arm simultaneous comparison, which would be the only accurate validation method based on auscultation. Two main alternative methods are provided by current standards, that is, two-arm simultaneous comparison (method 1) and one-arm sequential comparison (method 2); however, the accuracy of these validation methods might not be sufficient to compensate for the suspicious accuracy in lateral blood pressure (BP) differences (LD) and/or BP variations (BPV) between the device and reference readings. Thus, the Japan ISO-WG for sphygmomanometer standards has been studying a new method that might improve validation accuracy (method 3). The purpose of this study is to determine the appropriateness of method 3 by comparing immunity to LD and BPV with those of the current validation methods (methods 1 and 2). The validation accuracy of the above three methods was assessed in human participants [N=120, 45+/-15.3 years (mean+/-SD)]. An oscillometric automated monitor, Omron HEM-762, was used as the tested device. When compared with the others, methods 1 and 3 showed a smaller intra-individual standard deviation of device error (SD1), suggesting their higher reproducibility of validation. The SD1 by method 2 (P=0.004) significantly correlated with the participant's BP, supporting our hypothesis that the increased SD of device error by method 2 is at least partially caused by essential BPV. Method 3 showed a significantly (P=0.0044) smaller interparticipant SD of device error (SD2), suggesting its higher interparticipant consistency of validation. Among the methods of validation of the clinical accuracy of auto-BPMs, method 3, which showed the highest reproducibility and highest interparticipant consistency, can be proposed as being the most appropriate.

77 FR 69422 - Cost Accounting Standards: Revision of the Exemption From Cost Accounting Standards for Contracts...

Science.gov (United States)

2012-11-19

... Accounting Standards: Revision of the Exemption From Cost Accounting Standards for Contracts and Subcontracts... Federal Procurement Policy (OFPP), Cost Accounting Standards (CAS) Board. ACTION: Proposed rule. SUMMARY... J. M. Wong, Director, Cost Accounting Standards Board (telephone: 202-395-6805; email: Raymond_wong...

76 FR 61660 - Cost Accounting Standards: Clarification of the Exemption From Cost Accounting Standards for Firm...

Science.gov (United States)

2011-10-05

... Accounting Standards: Clarification of the Exemption From Cost Accounting Standards for Firm-Fixed-Price... Management and Budget (OMB), Office of Federal Procurement Policy, Cost Accounting Standards Board. ACTION: Proposed rule. SUMMARY: The Office of Federal Procurement Policy (OFPP), Cost Accounting Standards (CAS...

Surface and subsurface cleanup protocol for radionuclides, Gunnison, Colorado, UMTRA project processing site: Final

International Nuclear Information System (INIS)

1994-01-01

Thorium 230 (Th-230) at the Gunnison, Colorado processing site will require remediation, however, a seasonally fluctuating groundwater table at the site significantly complicates conventional remedial action with respect to cleanup. Therefore, to effectively remediate the site with respect to Radium 226 (Ra-226) and Th-230, the following supplemental standard is proposed: In situ Ra-26 will be remediated to the EPA soil cleanup standards independent of groundwater considerations. In situ Th-230 concentrations will be remediated in the region above the encountered water table so the 1000-year projected Ra-226 concentration complies with the EPA soil cleanup concentration limits. If elevated Th-230 persists to the water table, an additional foot of excavation will be performed and the grid will be backfilled. Excavated grids will be backfilled to the final remedial action grade with clean cobbly soil. Final grid verification that is required below the water table will be performed by extracting and analyzing a single bulk soil sample with the bucket of a backhoe. Modeled surface radon flux values will be estimated and documented. A recommendation will be made that land records should be annotated to identify the presence of residual Th-230

78 FR 9054 - Issuance of Final Guidance Publication

Science.gov (United States)

2013-02-07

... NIOSH-144] Issuance of Final Guidance Publication AGENCY: National Institute for Occupational Safety and... Services (HHS). ACTION: Notice of issuance of final guidance publication. SUMMARY: The National Institute...), announces the availability of the following publication: ``NIOSH Criteria for a Recommended Standard...

Modified A{sup ++}-standard refrigerator with 30% reduction of energy consumption. Higher efficiency by compressor modification - Final report

Energy Technology Data Exchange (ETDEWEB)

Siegrist, M.; Stahl, S.; Ganz, J.

2010-06-15

This final report for the Swiss Federal Office of Energy (SFOE) takes a look at how a modified refrigerator can be given a higher efficiency by modifying the compressor. The modified refrigerator was fitted with a variable-speed compressor. This compressor could be run at much lower speeds so that it was in operation for up to 90% of the time. It was shown that less electricity was consumed the more the compressor ran. The report discusses the aims of the work and presents details on the standard refrigerator used for the tests. The compressor normally used and the variable-speed compressor used in the test are described. Systems for temperature control and data acquisition during the tests are described. The results obtained are examined and the influence of various factors is discussed.

Developing evidence-based prescriptive ventilation rate standards for commercial buildings in California: a proposed framework

Energy Technology Data Exchange (ETDEWEB)

Mendell, Mark J.; Fisk, William J.

2014-02-01

Background - The goal of this project, with a focus on commercial buildings in California, was to develop a new framework for evidence-based minimum ventilation rate (MVR) standards that protect occupants in buildings while also considering energy use and cost. This was motivated by research findings suggesting that current prescriptive MVRs in commercial buildings do not provide occupants with fully safe and satisfactory indoor environments. Methods - The project began with a broad review in several areas ? the diverse strategies now used for standards or guidelines for MVRs or for environmental contaminant exposures, current knowledge about adverse human effects associated with VRs, and current knowledge about contaminants in commercial buildings, including their their presence, their adverse human effects, and their relationships with VRs. Based on a synthesis of the reviewed information, new principles and approaches are proposed for setting evidence-based VRs standards for commercial buildings, considering a range of human effects including health, performance, and acceptability of air. Results ? A review and evaluation is first presented of current approaches to setting prescriptive building ventilation standards and setting acceptable limits for human contaminant exposures in outdoor air and occupational settings. Recent research on approaches to setting acceptable levels of environmental exposures in evidence-based MVR standards is also described. From a synthesis and critique of these materials, a set of principles for setting MVRs is presented, along with an example approach based on these principles. The approach combines two sequential strategies. In a first step, an acceptable threshold is set for each adverse outcome that has a demonstrated relationship to VRs, as an increase from a (low) outcome level at a high reference ventilation rate (RVR, the VR needed to attain the best achievable levels of the adverse outcome); MVRs required to meet each

Final report on CCM key comparison CCM.D-K2: Comparison of liquid density standards

Science.gov (United States)

Bettin, Horst; Jacques, Claude; Zelenka, Zoltán; Fujii, Ken-ichi; Kuramoto, Naoki; Chang, Kyung-Ho; Lee, Yong Jae; Becerra, Luis Omar; Domostroeva, Natalia

2013-01-01

The results are presented of the key comparison CCM.D-K2 that covered the density measurements of four liquids: the density of water at 20 °C, of pentadecane at 15 °C, 20 °C, 40 °C and 60°C, of tetrachloroethlyene at 5 °C and 20 °C and of a viscous oil at 20 °C. Seven national metrology institutes measured the densities at atmospheric pressure by hydrostatic weighing of solid density standards in the time interval from 27 April 2004 to 28 June 2004. Since the participants were asked not to include components for a possible drift or inhomogeneity of the liquid in their uncertainty budget, these uncertainty contributions are investigated for the final evaluation of the data. For this purpose, results of stability and homogeneity measurements of the pilot laboratory are used. The participants decided not to include a possible drift of the liquid's density since no significant drift could be detected, and the influence of the drift and its uncertainty are negligible. Similarly, the inhomogeneity of the water and pentadecane samples is not significant and has no influence on the evaluation. Thus, it was neglected. Only the inhomogeneities of tetrachloroethylene and of the viscous oil were significant. Consequently, they were included in the evaluation. With one or two exceptions, the results show good agreement among the participants. Only in the case of water are the results clearly discrepant. The key comparison reference values were calculated by the weighted mean (taking into account a small correlation between two participants) in the case of consistent results. Otherwise the Procedure B of Cox was used. The expanded uncertainties of all reference densities are below 1 × 10-5 in relative terms. This satisfies the needs of all customers who wish to calibrate or check liquid density measuring instruments such as oscillation-type density meters. The comparison fully supports the calibration measurement capabilities table in the BIPM key comparison database

Constraining new physics with collider measurements of Standard Model signatures

Energy Technology Data Exchange (ETDEWEB)

Butterworth, Jonathan M. [Department of Physics and Astronomy, University College London,Gower St., London, WC1E 6BT (United Kingdom); Grellscheid, David [IPPP, Department of Physics, Durham University,Durham, DH1 3LE (United Kingdom); Krämer, Michael; Sarrazin, Björn [Institute for Theoretical Particle Physics and Cosmology, RWTH Aachen University,Sommerfeldstr. 16, 52056 Aachen (Germany); Yallup, David [Department of Physics and Astronomy, University College London,Gower St., London, WC1E 6BT (United Kingdom)

2017-03-14

A new method providing general consistency constraints for Beyond-the-Standard-Model (BSM) theories, using measurements at particle colliders, is presented. The method, ‘Constraints On New Theories Using Rivet’, CONTUR, exploits the fact that particle-level differential measurements made in fiducial regions of phase-space have a high degree of model-independence. These measurements can therefore be compared to BSM physics implemented in Monte Carlo generators in a very generic way, allowing a wider array of final states to be considered than is typically the case. The CONTUR approach should be seen as complementary to the discovery potential of direct searches, being designed to eliminate inconsistent BSM proposals in a context where many (but perhaps not all) measurements are consistent with the Standard Model. We demonstrate, using a competitive simplified dark matter model, the power of this approach. The CONTUR method is highly scaleable to other models and future measurements.

E-Standards For Mass Properties Engineering

Science.gov (United States)

Cerro, Jeffrey A.

2008-01-01

A proposal is put forth to promote the concept of a Society of Allied Weight Engineers developed voluntary consensus standard for mass properties engineering. This standard would be an e-standard, and would encompass data, data manipulation, and reporting functionality. The standard would be implemented via an open-source SAWE distribution site with full SAWE member body access. Engineering societies and global standards initiatives are progressing toward modern engineering standards, which become functioning deliverable data sets. These data sets, if properly standardized, will integrate easily between supplier and customer enabling technically precise mass properties data exchange. The concepts of object-oriented programming support all of these requirements, and the use of a JavaTx based open-source development initiative is proposed. Results are reported for activity sponsored by the NASA Langley Research Center Innovation Institute to scope out requirements for developing a mass properties engineering e-standard. An initial software distribution is proposed. Upon completion, an open-source application programming interface will be available to SAWE members for the development of more specific programming requirements that are tailored to company and project requirements. A fully functioning application programming interface will permit code extension via company proprietary techniques, as well as through continued open-source initiatives.

Treatment of onychomycosis caused by dermatophytes--an opinion proposed by Committee for Standardization of the Japanese Society for Medical Mycology 2007.

Science.gov (United States)

Mohri, Shinobu; Watanabe, Shinichi; Toshio, Kusunoki; Shibuya, Kazutoshi; Nishiyama, Yayoi; Abe, Michiko; Uno, Jun; Oguri, Toyoko; Maeasaki, Shigefumi; Ikeda, Reiko; Abe, Shigeru

2008-01-01

After the rapid progress in therapeutic pharmaceutics against onychomycosis caused by dermatophytes in the 1990s, an optimal therapeutic strategy for individual patients with the onychomycosis has become possible for clinical dermatologists. In this review, we discuss on clinical problems concerning this disease and propose recommendable treatments for each patient with topical and/or systemic use of antifungal agents. Finally, with consideration of already published therapeutic guidelines, we stress the necessity of "order-made" therapy for each patient with his/her medical status and wishes taking into account.

78 FR 54517 - Water Quality Standards Regulatory Clarifications

Science.gov (United States)

2013-09-04

... 131 Water Quality Standards Regulatory Clarifications; Proposed Rule #0;#0;Federal Register / Vol. 78... AGENCY 40 CFR Part 131 [EPA-HQ-OW-2010-0606; FRL-9839-7] RIN 2040-AF 16 Water Quality Standards... Environmental Protection Agency (EPA) is proposing changes to the federal water quality standards (WQS...

18 CFR 39.5 - Reliability Standards.

Science.gov (United States)

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Reliability Standards... RELIABILITY STANDARDS § 39.5 Reliability Standards. (a) The Electric Reliability Organization shall file each Reliability Standard or modification to a Reliability Standard that it proposes to be made effective under...

Final environmental statement, Liquid Metal Fast Breeder Reactor Program. Volume 1

International Nuclear Information System (INIS)

1975-12-01

Information is presented under the following section headings: LMFBR program options and their compatibility with the major issues affecting commercial development, Proposed Final Environmental Statement for the LMFBR program, December 1974, WASH-1535, supplemental material, and material relating to Proposed Final Environmental Statement review

Standard rules for liability and cover for nuclear installations

International Nuclear Information System (INIS)

Pfaffelhuber, J.K.; Kuckuck, B.

1980-01-01

To afford full protection for possible victims, the authors of this article are in favour of doing away with the limitation of liability of nuclear operators presently provided under the German Atomic Energy Act, the principle of which is based on the Paris Convention and the Brussels Supplementary Convention. In support of this argument reference is made to the recent accident at Three Mile Island, trends in other national legislation towards unlimited liability as well as high safety standards in German nuclear plants. Finally, possible ways of providing unlimited liability are proposed, in particular increased insurance cover and the constitution of an interest-bearing fund in addition to State intervention in case of a major nuclear incident. (NEA) [fr

Search for the Standard Model Higgs boson produced in association with top quark pairs in multi-leptonic final states with the ATLAS detector at the LHC

CERN Document Server

Milesi, Marco; Andreazza, Attilio

The search for the Standard Model (SM) Higgs boson produced in association with top quarks - known as $t\\bar{t}H$ production - plays a crucial role in the Large Hadron Collider (LHC) physics programme, as it allows a direct measurement of the Higgs field Yukawa coupling to the heaviest fermion and can constrain effects of new physics beyond the Standard Model in the top coupling sector. This thesis presents a search for the $t\\bar{t}H$ production in an inclusive multi-leptonic final state, with a proton-proton collision dataset corresponding to an integrated luminosity of $\\int L dt = 36.1~\\mathrm{fb}^{−1}$, collected by the ATLAS experiment at the LHC in 2015 and 2016 at a centre-of-mass energy of $\\sqrt{s}=13~\\mathrm{TeV}$.
 The final state is characterised by high jet multiplicity, and the presence of several electrons and muons, as well as hadronically decaying tau leptons. The multiplicity of these physics objects allows the definition of several categories to enhance the sensitivity of the analysis...

Effluent standards

Energy Technology Data Exchange (ETDEWEB)

Geisler, G C [Pennsylvania State University (United States)

1974-07-01

At the conference there was a considerable interest in research reactor standards and effluent standards in particular. On the program, this is demonstrated by the panel discussion on effluents, the paper on argon 41 measured by Sims, and the summary paper by Ringle, et al. on the activities of ANS research reactor standards committee (ANS-15). As a result, a meeting was organized to discuss the proposed ANS standard on research reactor effluents (15.9). This was held on Tuesday evening, was attended by members of the ANS-15 committee who were present at the conference, participants in the panel discussion on the subject, and others interested. Out of this meeting came a number of excellent suggestions for changes which will increase the utility of the standard, and a strong recommendation that the effluent standard (15.9) be combined with the effluent monitoring standard. It is expected that these suggestions and recommendations will be incorporated and a revised draft issued for comment early this summer. (author)

Regulatory impact analysis of the proposed great lakes water quality guidance. Final report

International Nuclear Information System (INIS)

Raucher, R.; Dixon, A.; Trabka, E.

1993-01-01

The Regulatory Impact Analysis provides direction to the Great Lakes States and Tribes on minimum water quality standards and contains numerical water quality criteria for 32 pollutants as well as methodologies for the development of water quality criteria for additional pollutants discharged to these waters. It also provides guidance to the Great Lakes States and Tribes on antidegradation policies and standards and implementation procedures

NASA's Earth Science Data Systems Standards Process Experiences

Science.gov (United States)

Ullman, Richard E.; Enloe, Yonsook

2007-01-01

NASA has impaneled several internal working groups to provide recommendations to NASA management on ways to evolve and improve Earth Science Data Systems. One of these working groups is the Standards Process Group (SPC). The SPG is drawn from NASA-funded Earth Science Data Systems stakeholders, and it directs a process of community review and evaluation of proposed NASA standards. The working group's goal is to promote interoperability and interuse of NASA Earth Science data through broader use of standards that have proven implementation and operational benefit to NASA Earth science by facilitating the NASA management endorsement of proposed standards. The SPC now has two years of experience with this approach to identification of standards. We will discuss real examples of the different types of candidate standards that have been proposed to NASA's Standards Process Group such as OPeNDAP's Data Access Protocol, the Hierarchical Data Format, and Open Geospatial Consortium's Web Map Server. Each of the three types of proposals requires a different sort of criteria for understanding the broad concepts of "proven implementation" and "operational benefit" in the context of NASA Earth Science data systems. We will discuss how our Standards Process has evolved with our experiences with the three candidate standards.

Text localization using standard deviation analysis of structure elements and support vector machines

Directory of Open Access Journals (Sweden)

Zagoris Konstantinos

2011-01-01

Full Text Available Abstract A text localization technique is required to successfully exploit document images such as technical articles and letters. The proposed method detects and extracts text areas from document images. Initially a connected components analysis technique detects blocks of foreground objects. Then, a descriptor that consists of a set of suitable document structure elements is extracted from the blocks. This is achieved by incorporating an algorithm called Standard Deviation Analysis of Structure Elements (SDASE which maximizes the separability between the blocks. Another feature of the SDASE is that its length adapts according to the requirements of the application. Finally, the descriptor of each block is used as input to a trained support vector machines that classify the block as text or not. The proposed technique is also capable of adjusting to the text structure of the documents. Experimental results on benchmarking databases demonstrate the effectiveness of the proposed method.

Current and proposed revisions, changes, and modifications to American codes and standards to address packaging, handling, and transportation of radioactive materials and how they relate to comparable international regulations

International Nuclear Information System (INIS)

Borter, W.H.; Froehlich, C.H.

2004-01-01

This paper addresses current and proposed revisions, additions, and modifications to American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (BPVC) (i.e., ''ASMEthe Code'') Section III, Division 3 and American National Standards Institute (ANSI)/ASME N14.6. It provides insight into the ongoing processes of the associated committees and highlights important revisions, changes, and modifications to this Code and Standard. The ASME Code has developed and issued Division 3 to address items associated with the transportation and storage of radioactive materials. It currently only addresses ''General Requirements'' in Subsections WA and ''Class TP (Type B) Containments'' (Transportation Packages) in Subsection WB, but is in the process of adding a new Subsection WC to address ''Class SC'' (Storage Containments). ANSI/ASME Standard N14.6 which interacts with components constructed to Division 3 by addressinges special lifting devices for radioactive material shipping containers. This Standard is in the process of a complete re-write. This Code and Standard can be classified as ''dynamic'' in that their committees meet at least four times a year to evaluate proposed modifications and additions that reflect current safety practices in the nuclear industry. These evaluations include the possible addition of new materials, fabrication processes, examination methods, and testing requirements. An overview of this ongoing process is presented in this paper along with highlights of the more important proposed revisions, changes, and modifications and how they relate to United States (US) and international regulations and guidance like International Atomic Energy Agency (IAEA) Requirement No. TS-R-1

Technical evaluation report of the Fort St. Vrain final draft upgraded technical specifications

International Nuclear Information System (INIS)

Kimura, C.Y.

1989-01-01

This report is a technical evaluation of the final draft of the Fort St. Vrain (FSV) Upgraded Technical Specifications (UT/S) as issued by Public Service of Colorado (PSC) on May 27, 1988 with subsequent supplemental updates issued on June 15, 1988 and August 5, 1988. It has been compared for consistency, and safety conservatism with the Fort St. Vrain (FSV) Updated Final Safety Analysis Report (FSAR), the FSV Safety Evaluation Report (SER), the Facility Operating License, DPR-34, and all amendments to the Facility Operating License issued as of June 1, 1988, and Appendix A to the Operating License DPR-34, Technical Specifications. Because of the age of the plant, no supplements to the Fort St. Vrain SER have been issued since the original SER was not issued as a WASH or a NUREG report. This made it necessary to review all amendments to the Facility Operating License since they would contain the safety evaluations done to support changes to the Facility Operating License. The upgraded Fort St. Vrain Technical Specifications were also broadly compared with the latest Westinghouse Standard Technical Specifications (WSTS) to assure that what was proposed for Fort St. Vrain was consistent with the latest NRC staff practices for standard technical specifications

77 FR 23420 - United States Standards for Wheat

Science.gov (United States)

2012-04-19

... and Stockyards Administration 7 CFR Part 810 RIN 0580-AB12 United States Standards for Wheat AGENCY..., 2012, regarding a proposal to revise the U.S. Standards for Wheat under the U.S. Grain Standards Act. The proposed rule would change the definition of Contrasting classes in Hard White wheat and change...

78 FR 37723 - Laser Products; Proposed Amendment to Performance Standard

Science.gov (United States)

2013-06-24

... of products that incorporate lasers are compact disc and DVD players, fax machines, fiber optic and... incorporate lasers are compact disc and DVD players, fax machines, fiber optic and free-air communication... additional training costs associated with learning the new standard, but believe estimated costs would be so...

75 FR 14386 - Interpretation of Transmission Planning Reliability Standard

Science.gov (United States)

2010-03-25

...] Interpretation of Transmission Planning Reliability Standard March 18, 2010. AGENCY: Federal Energy Regulatory... transmission planning Reliability Standard TPL-002-0 provides that planning authorities and transmission... Reliability Standard TPL-002-0. In this order, the Commission proposes to reject NERC's proposed...

78 FR 35585 - Updating OSHA Standards Based on National Consensus Standards; Signage

Science.gov (United States)

2013-06-13

...; Signage AGENCY: Occupational Safety and Health Administration (OSHA), Department of Labor. ACTION: Notice... Administration (``OSHA'' or ``the Agency'') proposes to update its general industry and construction signage... standards, ANSI Z53.1-1967, Z35.1-1968, and Z35.2-1968, in its signage standards, thereby providing...

A proposed grading system for standardizing tumor consistency of intracranial meningiomas.

Science.gov (United States)

Zada, Gabriel; Yashar, Parham; Robison, Aaron; Winer, Jesse; Khalessi, Alexander; Mack, William J; Giannotta, Steven L

2013-12-01

grade was 0.87 (SE 0.06, 95% CI 0.76-0.99), with 90% user agreement. Kappa analysis scores for minimum and maximum grades of tumor regions were 0.69 (agreement 72%) and 0.75 (agreement 78%), respectively. The kappa analysis score for tumor vascularity grading was 0.56 (agreement 76%). Overall consistency did not correlate with patient age, tumor location, or tumor size. A higher tumor vascularity grade was associated with a larger tumor diameter (p = 0.045) and with skull base location (p = 0.02). The proposed grading system provides a reliable, practical, and objective assessment of meningioma consistency and facilitates communication among providers. This system also accounts for heterogeneity in tumor consistency. With the proposed scale, meningioma consistency can be standardized as groundwork for future studies relating to surgical outcomes, predictability of consistency and vascularity using neuroimaging techniques, and effectiveness of various surgical instruments.

76 FR 55155 - Final Environmental Impact Statement for the Proposed Keystone XL Project

Science.gov (United States)

2011-09-06

... border of the U.S. and Canada for the transport of crude oil across the U.S./Canada international... proposed Project that is designed to transport crude oil produced from oil sands in the Western Canadian... security; environmental, cultural, and economic impacts. Before making a decision on the proposed Project...

Security analysis of standards-driven communication protocols for healthcare scenarios.

Science.gov (United States)

Masi, Massimiliano; Pugliese, Rosario; Tiezzi, Francesco

2012-12-01

The importance of the Electronic Health Record (EHR), that stores all healthcare-related data belonging to a patient, has been recognised in recent years by governments, institutions and industry. Initiatives like the Integrating the Healthcare Enterprise (IHE) have been developed for the definition of standard methodologies for secure and interoperable EHR exchanges among clinics and hospitals. Using the requisites specified by these initiatives, many large scale projects have been set up for enabling healthcare professionals to handle patients' EHRs. The success of applications developed in these contexts crucially depends on ensuring such security properties as confidentiality, authentication, and authorization. In this paper, we first propose a communication protocol, based on the IHE specifications, for authenticating healthcare professionals and assuring patients' safety. By means of a formal analysis carried out by using the specification language COWS and the model checker CMC, we reveal a security flaw in the protocol thus demonstrating that to simply adopt the international standards does not guarantee the absence of such type of flaws. We then propose how to emend the IHE specifications and modify the protocol accordingly. Finally, we show how to tailor our protocol for application to more critical scenarios with no assumptions on the communication channels. To demonstrate feasibility and effectiveness of our protocols we have fully implemented them.

76 FR 75782 - Revising Standards Referenced in the Acetylene Standard

Science.gov (United States)

2011-12-05

... Determinations A. Legal Considerations B. Final Economic Analysis and Regulatory Flexibility Act Certification C... within the meaning of Section 652(8) when a significant risk of material harm exists in the workplace and the standard would substantially reduce or eliminate that workplace risk. This DFR will not reduce the...

78 FR 55171 - Removal of Standards of Ethical Conduct Regulations

Science.gov (United States)

2013-09-10

... Ethical Conduct Regulations AGENCY: Special Inspector General for Iraq Reconstruction. ACTION: Final rule... concurrence of the Office of Government Ethics (OGE), issued a final rule for employees of the SIGIR that supplemented the executive-branch-wide Standards of Ethical Conduct (Standards) issued by OGE. With certain...

76 FR 58433 - Proposal To Revise Service Standards for First-Class Mail, Periodicals, and Standard Mail

Science.gov (United States)

2011-09-21

... sharp revenue declines associated with falling volumes, as well as other statutorily mandated costs, the... and to bring operating costs in line with revenues, will for the most part be unachievable without a... effectively managed on the workroom floors of a complex logistical network.'' Modern Service Standards for...

Beyond the standard model

International Nuclear Information System (INIS)

Pleitez, V.

1994-01-01

The search for physics laws beyond the standard model is discussed in a general way, and also some topics on supersymmetry theories. An approach is made on recent possibilities rise in the leptonic sector. Finally, models with SU(3) c X SU(2) L X U(1) Y symmetry are considered as alternatives for the extensions of the elementary particles standard model. 36 refs., 1 fig., 4 tabs

Standard review plan on antitrust reviews. Final report

International Nuclear Information System (INIS)

Lambe, W.M.; Davis, M.J.

1997-12-01

This standard review plan describes the procedures used by NRC staff to implement the antitrust review and enforcement provisions in Sections 105 and 186 of the Atomic Energy Act of 1954, as amended (the Act), and replaces NUREG-0970. These procedures are principally derived from the Commission's Rules and Regulations in 10 CFR Sections 2.101, 2.102, Part 2-Appendix A, Section X, 50.33a, 50.80, 50.90, and 52.77. These procedures set forth the steps and criteria the staff uses in antitrust reviews of construction permit applications, operating license applications, combined construction permit/operating license applications, combined construction permit/operating license applications, and applications for approval of the transfer of construction permits, operating licenses, and combined licenses. In addition, the procedures describe how the staff enforces compliance with antitrust conditions appended to licenses

The standardizing measures which are needed

International Nuclear Information System (INIS)

Prasse, R.

1974-01-01

1. The necessity for standardizing measures: a) for the construction of final storage sites, b) for the operation of final storage sites, c) securing the existence and warranting the safety towards intervening third parties. 2. Legislative power and the incorporation of new regulations into established law. (orig./HP) [de

Photovoltaic Device Performance Evaluation Using an Open-Hardware System and Standard Calibrated Laboratory Instruments

Directory of Open Access Journals (Sweden)

Jesús Montes-Romero

2017-11-01

Full Text Available This article describes a complete characterization system for photovoltaic devices designed to acquire the current-voltage curve and to process the obtained data. The proposed system can be replicated for educational or research purposes without having wide knowledge about electronic engineering. Using standard calibrated instrumentation, commonly available in any laboratory, the accuracy of measurements is ensured. A capacitive load is used to bias the device due to its versatility and simplicity. The system includes a common part and an interchangeable part that must be designed depending on the electrical characteristics of each PV device. Control software, developed in LabVIEW, controls the equipment, performs automatic campaigns of measurements, and performs additional calculations in real time. These include different procedures to extrapolate the measurements to standard test conditions and methods to obtain the intrinsic parameters of the single diode model. A deep analysis of the uncertainty of measurement is also provided. Finally, the proposed system is validated by comparing the results obtained from some commercial photovoltaic modules to the measurements given by an independently accredited laboratory.

Analogy, an Alternative Model.
 Critics to the standard model of analogical problems solving and proposals for an alternative one

Directory of Open Access Journals (Sweden)

Ricardo A. Minervino

2016-02-01

Full Text Available The authors made an extension of Hofstadter‘s criticisms against the standard approach in analogical thinking represented by the structure-mapping theory of Gentner and the multiconstraint theory of Holyoak and Thagard. Based on this extension, they proposed a non-serial model of analogical problem solving. Against the standard approach, the model postulates that: (a people detect and evaluate differences between mapped elements before the subprocess of inference generation and consider them in order to control it, and (b properties of an element that explain why the element could fill a certain role in the base problem resolution (PERs play a crucial role in these detection and evaluation operations, and also in post-inferences subprocesses. An experiment showed that: (a people detect and evaluate the relevance of differences between mapped elements before inference generation, (b that they inhibit the generation of literal inferences when they face relevant differences, and (c that they stop the subprocess when they recognize insuperable ones. The results also showed that base PERs are reactivated at different moments of analogical transfer. The data obtained are incompatible with the standard theories of analogical thinking, which treat inference generation as a syntactic mechanism and exclude contextual semantic analysis from the study of analogy. 

Physics with Tau Lepton Final States in ATLAS

Directory of Open Access Journals (Sweden)

Pingel Almut M.

2013-05-01

Full Text Available The ATLAS detector records collisions from two high-energetic proton beams circulating in the LHC. An integral part of the ATLAS physics program are analyses with tau leptons in the final state. Here an overview is given over the studies done in ATLAS with hadronically-decaying final state tau leptons: Standard Model cross-section measurements of Z → ττ, W → τν and tt̅ → bb̅ e/μν τhadν; τ polarization measurements in W → τν decays; Higgs searches and various searches for physics beyond the Standard Model.

International Standards Development for Marine and Hydrokinetic Renewable Energy - Final Report on Technical Status

Energy Technology Data Exchange (ETDEWEB)

Rondorf, Neil E.; Busch, Jason; Kimball, Richard

2011-10-29

This report summarizes the progress toward development of International Standards for Marine and Hydrokinetic Renewable Energy, as funded by the U.S. Department of Energy (DOE) under the International Electrotechnical Commission (IEC) Technical Committee 114. The project has three main objectives: 1. Provide funding to support participation of key U.S. industry technical experts in 6 (originally 4) international working groups and/or project teams (the primary standards-making committees) and to attend technical meetings to ensure greater U.S. involvement in the development of these standards. 2. Provide a report to DOE and industry stakeholders summarizing the IEC standards development process for marine and hydrokinetic renewable energy, new international standards and their justifications, and provide standards guidance to industry members. 3. Provide a semi-annual (web-based) newsletter to the marine renewable energy community. The newsletter will educate industry members and stakeholders about the processes, progress, and needs of the US efforts to support the international standards development effort. The newsletter is available at www.TC114.us

75 FR 65706 - Notice of Final Federal Agency Actions on Proposed Highway in Washington State

Science.gov (United States)

2010-10-26

... actions taken by the FHWA and other Federal agencies that are final within the meaning of 23 U.S.C. 139(l... notice, the FHWA is advising the public of final agency actions subject to 23 U.S.C. 139(l)(1). A claim... still applies. FOR FURTHER INFORMATION CONTACT: For FHWA: Ms. Liana Liu, Area Engineer, Federal Highway...

Proposed alternatives for international plutonium storage

International Nuclear Information System (INIS)

de Montmollin, J.M.

1983-01-01

The IAEA Director General convened an Expert Group in December 1978, to study proposals for implementing some form of IPS. The Group labored for three years, developing details of a single proposed concept. In early 1982 a group of developing countries proposed a different and less-restrictive scheme, which was labeled Alternative B. In response, three other countries proposed a scheme more restrictive than the original Alternative A. The Expert Group forwarded all three alternatives to the Board of Governors, without recommendation, in its final report. In this paper the features that distinguish each of the alternatives are described

Gas industry standards board: Legal considerations in the standard setting process

Energy Technology Data Exchange (ETDEWEB)

Mishkin, M.T.; Adelman, D.I.

1994-01-01

On December 23, 1993, the Federal Energy Regulatory Commission (FERC) issued Order 563, a Final Rule adopting the agreements of informal industry-wide working groups to standardize information relating to pipeline capacity release programs mandated under Order 636. Order 563 is noteworthy for its reliance upon the industry to develop consensus standards for Commission adoption. The industry's success in reaching agreements on key communication standards issues spawned recommendations from the working groups to continue the development and maintenance of industry-wide standards through a permanent Gas Industry Standards Board (GISB). This article examines legal issues bearing on GISB's potential role in the regulatory process. Specifically, this article addresses constitutional and statutory considerations relating to the FERC's authority to delegate certain responsibilities to a voluntary, industry sponsored and supported private body such as that taking shape within the gas industry.

76 FR 2598 - Final Theft Data; Motor Vehicle Theft Prevention Standard

Science.gov (United States)

2011-01-14

... the Toyota Matrix. NHTSA is correcting the final theft data to include the thefts and production volumes for the Toyota Matrix. As a result of this correction, the Toyota Matrix, previously not listed........... 219 99,176 2.2082 47 TOYOTA COROLLA 374 170,360 2.1954 48 AUDI AUDI S6 2 928 2.1552 49 GENERAL MOTORS...

Requirements of quality standards

International Nuclear Information System (INIS)

Mueller, J.

1977-01-01

The lecture traces the development of nuclear standards, codes, and Federal regulations on quality assurance (QA) for nuclear power plants and associated facilities. The technical evolution of the last twelve years, especially in the area of nuclear technology, led to different activities and regulatory initiatives, and the present result is: several nations have their own homemade standards. The lecture discusses the former and especially current activities in standard development, and gives a description of the requirements of QA-standards used in USA and Europe, especially Western Germany. Furthermore the lecture attempts to give a comparison and an evaluation of the international quality standards from the author's viewpoint. Finally the lecture presents an outlook for the future international implications of QA-standards. There is an urgent need within the nuclear industry for simplification and standardization of QA-standards. The relationship between the various standards, and the applicability of the standards need clarification and a better transparancy. To point out these problems is the purpose of the lecture. (orig.) [de

Badminton: Course Proposal.

Science.gov (United States)

Yeo, David G.

A proposal is presented for a Community College of Philadelphia Life Sciences and Allied Health Services course in Badminton. Following a standard cover form, a statement of purpose explains that the course is designed to introduce students to the techniques, knowledge, and strategies of badminton. Next, course goals and a course outline are…

IPMA STANDARD ELEMENTS AND FEEDBACK IN PROJECT MANAGEMENT TEACHING

Directory of Open Access Journals (Sweden)

BARTOŠKA, Jan

2011-09-01

Full Text Available The paper proposes the concept of project management teaching including the International Project Management Association (IPMA standard. The concept of teaching is theoretical and derives from the notion of competence, which the IPMA standard is based on. The paper presents a brief description of the IPMA standard and endeavours to define the notion of competence. The competence is worked with in respect to hierarchical recognition. The proposed teaching concept works with the concepts of information, knowledge and skills. The teaching proposal stems from the structure and contents of the IPMA standard elements. Furthermore, the paper elaborates the issue of embedding the elements of the IPMA standard competences into training courses. In the article, the eye of the IPMA competences is further enhanced with possible training courses and specialist areas in which the standard elements can thematically be included. The paper states that the competence elements and training courses cross one another and overlap in a manifold way. The authors also propose a way which could verify into what extent the students have actually acquired taught IPMA competence elements. The paper contains the proposal of feedback quantification for the IPMA standard and project management teaching. The results of the paper can be used as a starting premise for future research. Both the verification proposal and the embedding of the elements into teaching are derived from on-going academic experience of the authors of the article.

Proposal for implementation risk management according ABNT NBR ISO 31000 standard applied to internal audit process of Integrated Management System of IPEN

International Nuclear Information System (INIS)

Scapin Junior, Wilson S.; Salvetti, Tereza C.; Longo, Guilherme C.

2015-01-01

The paper objective is to establish a risk management methodology applied to internal audits processes of IPEN Integrated Management System (IMS). In continuous seeking of updating methodologies to assist effective management based on the constant changes in the organizational world, and the development of management tools used for decision making, risk management demonstrates trends to be a new tool with high efficiency. This trend is accentuated by the fact that risk management is being incorporated into the new revision of quality management standard ISO 9001, estimated conclusion in November 2015. The identification, evaluation and treatment of risks are present in eleven items of its ten requirements at new revision. From the conclusion of the review, all organizations certified by that standard should make the necessary changes in their systems to meet the new requirements. This proposal will provide anticipate the changes that will occur in the management system of IPEN in accordance with this new revision. With the character of a pilot program to implement the organizational culture change in relationship to new concepts related to risks and implementation of risk management all other system processes that will be affected by the new revision of this standard. The methodology used for this paper is supported by the standards ABNT NBR ISO 31000. (author)

Proposal for implementation risk management according ABNT NBR ISO 31000 standard applied to internal audit process of Integrated Management System of IPEN

Energy Technology Data Exchange (ETDEWEB)

Scapin Junior, Wilson S.; Salvetti, Tereza C.; Longo, Guilherme C., E-mail: wsscapin@ipen.br, E-mail: salvetti@ipen.br, E-mail: glongo@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2015-07-01

The paper objective is to establish a risk management methodology applied to internal audits processes of IPEN Integrated Management System (IMS). In continuous seeking of updating methodologies to assist effective management based on the constant changes in the organizational world, and the development of management tools used for decision making, risk management demonstrates trends to be a new tool with high efficiency. This trend is accentuated by the fact that risk management is being incorporated into the new revision of quality management standard ISO 9001, estimated conclusion in November 2015. The identification, evaluation and treatment of risks are present in eleven items of its ten requirements at new revision. From the conclusion of the review, all organizations certified by that standard should make the necessary changes in their systems to meet the new requirements. This proposal will provide anticipate the changes that will occur in the management system of IPEN in accordance with this new revision. With the character of a pilot program to implement the organizational culture change in relationship to new concepts related to risks and implementation of risk management all other system processes that will be affected by the new revision of this standard. The methodology used for this paper is supported by the standards ABNT NBR ISO 31000. (author)

A Proposal of New Reference System for the Standard Axial, Sagittal, Coronal Planes of Brain Based on the Serially-Sectioned Images

Science.gov (United States)

Park, Jin Seo; Park, Hyo Seok; Shin, Dong Sun; Har, Dong-Hwan; Cho, Zang-Hee; Kim, Young-Bo; Han, Jae-Yong; Chi, Je-Geun

2010-01-01

Sectional anatomy of human brain is useful to examine the diseased brain as well as normal brain. However, intracerebral reference points for the axial, sagittal, and coronal planes of brain have not been standardized in anatomical sections or radiological images. We made 2,343 serially-sectioned images of a cadaver head with 0.1 mm intervals, 0.1 mm pixel size, and 48 bit color and obtained axial, sagittal, and coronal images based on the proposed reference system. This reference system consists of one principal reference point and two ancillary reference points. The two ancillary reference points are the anterior commissure and the posterior commissure. And the principal reference point is the midpoint of two ancillary reference points. It resides in the center of whole brain. From the principal reference point, Cartesian coordinate of x, y, z could be made to be the standard axial, sagittal, and coronal planes. PMID:20052359

76 FR 70414 - National Fire Protection Association (NFPA) Proposes To Revise Codes and Standards

Science.gov (United States)

2011-11-14

... Commercial Cooking Operations. NFPA 99--2012 Health Care Facilities Code 6/22/2012 NFPA 99B--2010 Standard... Explosion Investigations..... 1/4/2012 NFPA 1005--2007 Standard for Professional Qualifications for 1/4/2012 Marine Fire Fighting for Land-Based Fire Fighters. NFPA 1021--2009 Standard for Fire Officer Professional...

77 FR 43018 - Updating OSHA Construction Standards Based on National Consensus Standards; Head Protection...

Science.gov (United States)

2012-07-23

.... OSHA-2011-0184] RIN 1218-AC65 Updating OSHA Construction Standards Based on National Consensus... Health Administration (OSHA), Department of Labor. ACTION: Notice of proposed rulemaking; correction. SUMMARY: OSHA is correcting a notice of proposed rulemaking (NPRM) with regard to the construction...

Calibration of Flick standards

International Nuclear Information System (INIS)

Thalmann, Ruedi; Spiller, Jürg; Küng, Alain; Jusko, Otto

2012-01-01

Flick standards or magnification standards are widely used for an efficient and functional calibration of the sensitivity of form measuring instruments. The results of a recent measurement comparison have shown to be partially unsatisfactory and revealed problems related to the calibration of these standards. In this paper the influence factors for the calibration of Flick standards using roundness measurement instruments are discussed in detail, in particular the bandwidth of the measurement chain, residual form errors of the device under test, profile distortions due to the diameter of the probing element and questions related to the definition of the measurand. The different contributions are estimated using simulations and are experimentally verified. Also alternative methods to calibrate Flick standards are investigated. Finally the practical limitations of Flick standard calibration are shown and the usability of Flick standards both to calibrate the sensitivity of roundness instruments and to check the filter function of such instruments is analysed. (paper)

User's guide for the implementation of level one of the proposed American National Standard Specifications for an information interchange data descriptive file on control data 6000/7000 series computers

CERN Document Server

Wiley, R A

1977-01-01

User's guide for the implementation of level one of the proposed American National Standard Specifications for an information interchange data descriptive file on control data 6000/7000 series computers

Radiological Control Technician: Standardized technician Qualification Standard

International Nuclear Information System (INIS)

1992-10-01

The Qualification Standard states and defines the knowledge and skill requirements necessary for successful completion of the Radiological Control Technician Training Program. The standard is divided into three phases: Phase I concerns RCT Academic training. There are 13 lessons associated with the core academics program and 19 lessons associated with the site academics program. The staff member should sign the appropriate blocks upon successful completion of the examination for that lesson or group of lessons. In addition, facility specific lesson plans may be added to meet the knowledge requirements in the Job Performance Measures (JPM) of the practical program. Phase II concerns RCT core/site practical (JPMs) training. There are thirteen generic tasks associated with the core practical program. Both the trainer/evaluator and student should sign the appropriate block upon successful completion of the JPM. In addition, facility specific tasks may be added or generic tasks deleted based on the results of the facility job evaluation. Phase III concerns the oral examination board successful completion of the oral examination board is documented by the signature of the chairperson of the board. Upon completion of all of the standardized technician qualification requirements, final qualification is verified by the student and the manager of the Radiological Control Department and acknowledged by signatures on the qualification standard. The completed Qualification Standard shall be maintained as an official training record

Weak fault detection and health degradation monitoring using customized standard multiwavelets

Science.gov (United States)

Yuan, Jing; Wang, Yu; Peng, Yizhen; Wei, Chenjun

2017-09-01

Due to the nonobvious symptoms contaminated by a large amount of background noise, it is challenging to beforehand detect and predictively monitor the weak faults for machinery security assurance. Multiwavelets can act as adaptive non-stationary signal processing tools, potentially viable for weak fault diagnosis. However, the signal-based multiwavelets suffer from such problems as the imperfect properties missing the crucial orthogonality, the decomposition distortion impossibly reflecting the relationships between the faults and signatures, the single objective optimization and independence for fault prognostic. Thus, customized standard multiwavelets are proposed for weak fault detection and health degradation monitoring, especially the weak fault signature quantitative identification. First, the flexible standard multiwavelets are designed using the construction method derived from scalar wavelets, seizing the desired properties for accurate detection of weak faults and avoiding the distortion issue for feature quantitative identification. Second, the multi-objective optimization combined three dimensionless indicators of the normalized energy entropy, normalized singular entropy and kurtosis index is introduced to the evaluation criterions, and benefits for selecting the potential best basis functions for weak faults without the influence of the variable working condition. Third, an ensemble health indicator fused by the kurtosis index, impulse index and clearance index of the original signal along with the normalized energy entropy and normalized singular entropy by the customized standard multiwavelets is achieved using Mahalanobis distance to continuously monitor the health condition and track the performance degradation. Finally, three experimental case studies are implemented to demonstrate the feasibility and effectiveness of the proposed method. The results show that the proposed method can quantitatively identify the fault signature of a slight rub on

77 FR 53236 - Proposed International Isotopes Fluorine Extraction Process and Depleted Uranium Deconversion...

Science.gov (United States)

2012-08-31

... environmental impacts from construction, operation, and decommissioning of the proposed INIS project. The Final... Commission. ACTION: Final environmental impact statement; issuance. SUMMARY: Notice is hereby given that the... potential environmental impacts of the proposed action. Other alternatives the NRC staff considered but...

Final Focus Systems in Linear Colliders

International Nuclear Information System (INIS)

Raubenheimer, Tor

1998-01-01

In colliding beam facilities, the ''final focus system'' must demagnify the beams to attain the very small spot sizes required at the interaction points. The first final focus system with local chromatic correction was developed for the Stanford Linear Collider where very large demagnifications were desired. This same conceptual design has been adopted by all the future linear collider designs as well as the SuperConducting Supercollider, the Stanford and KEK B-Factories, and the proposed Muon Collider. In this paper, the over-all layout, physics constraints, and optimization techniques relevant to the design of final focus systems for high-energy electron-positron linear colliders are reviewed. Finally, advanced concepts to avoid some of the limitations of these systems are discussed

Evaluation Standard for Safety Coefficient of Roller Compacted Concrete Dam Based on Finite Element Method

Directory of Open Access Journals (Sweden)

Bo Li

2014-01-01

Full Text Available The lack of evaluation standard for safety coefficient based on finite element method (FEM limits the wide application of FEM in roller compacted concrete dam (RCCD. In this paper, the strength reserve factor (SRF method is adopted to simulate gradual failure and possible unstable modes of RCCD system. The entropy theory and catastrophe theory are used to obtain the ultimate bearing resistance and failure criterion of the RCCD. The most dangerous sliding plane for RCCD failure is found using the Latin hypercube sampling (LHS and auxiliary analysis of partial least squares regression (PLSR. Finally a method for determining the evaluation standard of RCCD safety coefficient based on FEM is put forward using least squares support vector machines (LSSVM and particle swarm optimization (PSO. The proposed method is applied to safety coefficient analysis of the Longtan RCCD in China. The calculation shows that RCCD failure is closely related to RCCD interface strength, and the Longtan RCCD is safe in the design condition. Considering RCCD failure characteristic and combining the advantages of several excellent algorithms, the proposed method determines the evaluation standard for safety coefficient of RCCD based on FEM for the first time and can be popularized to any RCCD.

CO2 emission standards and investment in carbon capture

International Nuclear Information System (INIS)

Eide, Jan; Sisternes, Fernando J. de; Herzog, Howard J.; Webster, Mort D.

2014-01-01

Policy makers in a number of countries have proposed or are considering proposing CO 2 emission standards for new fossil fuel-fired power plants. The proposed standards require coal-fired power plants to have approximately the same carbon emissions as an uncontrolled natural gas-fired power plant, effectively mandating the adoption of carbon capture and sequestration (CCS) technologies for new coal plants. However, given the uncertainty in the capital and operating costs of a commercial scale coal plant with CCS, the impact of such a standard is not apparent a priori. We apply a stochastic generation expansion model to determine the impact of CO 2 emission standards on generation investment decisions, and in particular for coal plants with CCS. Moreover, we demonstrate how the incentive to invest in coal-CCS from emission standards depends on the natural gas price, the CO 2 price, and the enhanced oil recovery price, as well as on the level of the emission standard. This analysis is the first to consider the entire power system and at the same time allow the capture percentage for CCS plants to be chosen from a continuous range to meet the given standard at minimum cost. Previous system level studies have assumed that CCS plants capture 90% of the carbon, while studies of individual units have demonstrated the costs of carbon capture over a continuous range. We show that 1) currently proposed levels of emission standards are more likely to shift fossil fuel generation from coal to natural gas rather than to incentivize investment in CCS; 2) tighter standards that require some carbon reductions from natural gas-fired power plants are more likely than proposed standards to incentivize investments in CCS, especially on natural gas plants, but also on coal plants at high gas prices; and 3) imposing a less strict emission standard (emission rates higher than natural gas but lower than coal; e.g., 1500 lbs/MWh) is more likely than current proposals to incentivize

Search for the Standard Model Higgs Boson at D0 in the Final State with Two τ's and Two Jets

International Nuclear Information System (INIS)

Tschann-Grimm, Kathryn

2011-01-01

The Standard Model (SM) is a very successful description of particle physics, and its predictions have stood up to a multitude of precision experimental tests. But one of the central elements of the SM, the Higgs mechanism, has yet to be verified. The Higgs mechanism (and the associated Higgs Boson) generates electroweak symmetry breaking and consequently allows for W and Z bosons and fermions to be massive. This thesis presents a search for the SM Higgs boson at the D0 experiment using the Tevatron particle accelerator at Fermilab in the final state ττ + jet jet with 4.3 fb -1 of data. This final state is sensitive to the Higgs production mechanisms gluon-gluon fusion and vector-boson fusion, and to the Higgs produced in association with a W or Z, for Higgs masses from 100 to 200 GeV. We see no evidence for the Higgs boson, but by itself our search does not rule out the SM Higgs. When this analysis is combined with other searches at the Tevatron the Higgs can be ruled out at a 95% confidence level for the mass range from 156 to 177 GeV.

77 FR 62433 - Hazard Communication Standard; Approval of Information Collection Requirements

Science.gov (United States)

2012-10-15

... safety data sheets (SDSs). The final standard harmonizes the U.S. system with international norms and as.... ACTION: Final rule; notice of the Office of Management and Budget's (OMB) approval of information... FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate of Standards and Guidance, OSHA, U.S...

Final Determination - signed March 1, 1990

Science.gov (United States)

Final Determination of the U.S. Environmental Protection Agency's Assistant Administrator for Water pursuant to Section 404(c) of the Clean Water Act concerning the proposed Big River water supply impoundment in Kent county, RI.

Requirements for facilities transferring or receiving select agents. Final rule.

Science.gov (United States)

2001-08-31

CDC administers regulations that govern the transfer of certain biological agents and toxins ("select agents"). These regulations require entities that transfer or receive select agents to register with CDC and comply with biosafety standards contained in the Third Edition of the CDC/NIH publication "Biosafety in Microbiological and Biomedical Laboratories ("BMBL")." On October 28,1999, CDC published a Notice of Proposed Rulemaking ("NPRM") seeking both to revise the biosafety standards facilities must follow when handling select agents and to provide new biosecurity standards for such facilities. These new standards are contained in the Fourth Edition of BMBL, which the NPRM proposed to incorporate by reference, thereby replacing the Third Edition. No comments were received in response to this proposal. CDC is therefore amending its regulations to incorporate the Fourth Edition.

76 FR 54537 - Swap Data Repositories: Registration Standards, Duties and Core Principles

Science.gov (United States)

2011-09-01

... Part 49 Swap Data Repositories: Registration Standards, Duties and Core Principles; Final Rule #0;#0...: Registration Standards, Duties and Core Principles AGENCY: Commodity Futures Trading Commission. ACTION: Final... registration requirements, statutory duties, core principles and certain compliance obligations for registered...

The development of the American national standard, ''control of radioactive surface contamination on materials, equipment and facilities to be released for uncontrolled use''

International Nuclear Information System (INIS)

Shapiro, J.

1980-01-01

The American National Standard, Control of Radioactive Surface Contamination on Materials, Equipment and Facilities to be Released for Uncontrolled Use, was developed under the procedures of ANSI for ANSI Main Committee N13 (Radiation Protection) by a working group of the Health Physics Society Standards Committee. This standard provides criteria for the control of materials, equipment and facilities contaminated with radioactivity proposed to be released for uncontrolled use. Permissible contamination limits are specified as well as methods assessing the levels of contamination. This paper reviews the proceedings of the Subcommittee on Radioactive Surface Contamination, the comments received by reviewers of the standard, the resolution of the committee, and the bases for reaching the final limits, recommendations, and measurement procedures. (H.K.)

Egocentric Temporal Action Proposals.

Science.gov (United States)

Shao Huang; Weiqiang Wang; Shengfeng He; Lau, Rynson W H

2018-02-01

We present an approach to localize generic actions in egocentric videos, called temporal action proposals (TAPs), for accelerating the action recognition step. An egocentric TAP refers to a sequence of frames that may contain a generic action performed by the wearer of a head-mounted camera, e.g., taking a knife, spreading jam, pouring milk, or cutting carrots. Inspired by object proposals, this paper aims at generating a small number of TAPs, thereby replacing the popular sliding window strategy, for localizing all action events in the input video. To this end, we first propose to temporally segment the input video into action atoms, which are the smallest units that may contain an action. We then apply a hierarchical clustering algorithm with several egocentric cues to generate TAPs. Finally, we propose two actionness networks to score the likelihood of each TAP containing an action. The top ranked candidates are returned as output TAPs. Experimental results show that the proposed TAP detection framework performs significantly better than relevant approaches for egocentric action detection.

Proposed Robust Entanglement-Based Magnetic Field Sensor Beyond the Standard Quantum Limit.

Science.gov (United States)

Tanaka, Tohru; Knott, Paul; Matsuzaki, Yuichiro; Dooley, Shane; Yamaguchi, Hiroshi; Munro, William J; Saito, Shiro

2015-10-23

Recently, there have been significant developments in entanglement-based quantum metrology. However, entanglement is fragile against experimental imperfections, and quantum sensing to beat the standard quantum limit in scaling has not yet been achieved in realistic systems. Here, we show that it is possible to overcome such restrictions so that one can sense a magnetic field with an accuracy beyond the standard quantum limit even under the effect of decoherence, by using a realistic entangled state that can be easily created even with current technology. Our scheme could pave the way for the realizations of practical entanglement-based magnetic field sensors.

Handling of final storage of unreprocessed spent nuclear fuel

International Nuclear Information System (INIS)

1978-01-01

In this report the various facilities incorporated in the proposed handling chain for spent fuel from the power stations to the final repository are discribed. Thus the geological conditions which are essential for a final repository is discussed as well as the buffer and canister materials and how they contribute towards a long-term isolation of the spent fuel. Furthermore one chapter deals with leaching of the deposited fuel in the event that the canister is penetrated as well as the transport mechanisms which determine the migration of the radioactive substances through the buffer material. The dispersal processes in the geosphere and the biosphere are also described together with the transfer mechanisms to the ecological systems as well as radiation doses. Finally a summary is given of the safety analysis of the proposed method for the handling and final storage of the spent fuel. (E.R.)

Optical tuning of arcs and final focus section of the Standard Linear Collider (SLC)

International Nuclear Information System (INIS)

Bambade, P.

1989-03-01

In this thesis, we present the experimental tuning procedures developed for the Arcs and for the Final Focus Section of the Stanford Linear Collider (SLC). Such tuning is necessary to maximize the luminosity, by minimizing the beam size at the interaction point, and to reduce backgrounds in the experiment. In the final Focus Section, the correction strategy must result from the principles of the optical design, which is based on cancellations between second order aberrations, and on the ability to measure micron-size beams typical of the SLC. In the Arcs, the corrections were designed after the initial commissioning, to make the system more error-tolerant, through a modification in the optical design, and to enable adjustements of the beam phase-space at the injection to the Final Focus System, through a harmonic perturbation technique inspired from circular accelerators. Although the overall optimization of the SLC is not entirely finished, an almost optimal set-up has been achieved for the optics of the Arcs and of the Final Focus Section. Beams with transverse sizes close to the nominal ones, of a few microns, have been obtained at the interaction point. We present and discuss our results and the optical limits to the present performance [fr

Environmental assessment. Energy efficiency standards for consumer products

Energy Technology Data Exchange (ETDEWEB)

McSwain, Berah

1980-06-01

The Energy Policy and Conservation Act of 1975 requires DOE to prescribe energy efficiency standards for 13 consumer products. The Consumer Products Efficiency Standards (CPES) program covers: refrigerators and refrigerator-freezers, freezers, clothes dryers, water heaters, room air conditioners, home heating equipment, kitchen ranges and ovens, central air conditioners (cooling and heat pumps), furnaces, dishwashers, television sets, clothes washers, and humidifiers and dehumidifiers. This Environmental Assessment evaluates the potential environmental and socioeconomic impacts expected as a result of setting efficiency standards for all of the consumer products covered by the CPES program. DOE has proposed standards for eight of the products covered by the Program in a Notice of Proposed Rulemaking (NOPR). DOE expects to propose standards for home heating equipment, central air conditioners (heat pumps only), dishwashers, television sets, clothes washers, and humidifiers and dehumidifiers in 1981. No significant adverse environmental or socioeconomic impacts have been found to result from instituting the CPES.

Final environmental impact statement Kenetech/PacifiCorp Windpower Project Carbon County, Wyoming

International Nuclear Information System (INIS)

1995-08-01

The Draft and Final Environmental Impact Statements (DEIS and FEIS) assess the environmental consequences of a proposed windpower energy development in Carbon County, Wyoming. This abbreviated FEIS revises and supplements the DEIS for the project and addresses comments expressed for the DEIS. The proposed project entails the erection of approximately 1,390 wind turbine generators and associated facilities (e.g., roads, substations, distribution and communications lines) by KENETECH Windpower, Inc. A 230-kV transmission line would be built by PacifiCorp, Inc. to connect a proposed substation on Foote Creek Rim near Arlington to the Miner's substation near Hanna. The proposed project would use standard procedures as currently employed by other right-of-way projects, plus additional project-specific and site-specific mitigation measures to ensure that project impacts are minimized on all important resources. Impacts to most resources would be negligible to moderate during the life-of-project. Potentially significant impacts from the project include avian mortality; declining avian populations; threatened, endangered, candidate, and/or state sensitive species mortality and/or habitat loss; disturbance to nearby residents due to noise; changes in visual resources; disturbance of important Native American traditional sites; changes in plant community species composition due to snow redistribution; displacement of big game due to windfarm operation; and loss of sage grouse nesting habitat. The proposed project could also have numerous beneficial impacts including increased revenues generated by taxes, increased employment, and benefits derived from using a nonpolluting resource for electric power generation

Proposed new South African loading code SANS 10160

CSIR Research Space (South Africa)

Dunaiski, PE

2006-11-01

Full Text Available in the treatment of actions and the resistance of structures, but more importantly to ensure consistency between structures consisting of different materials, even more so if this occurs in the same structure. Such harmonisation is for instance important... to the inclusion of geotechnical actions in the proposed standard. o The scope of the proposed standard is determined by the scope of structures provided for; basis of structural design, including target levels of reliability; actions to be considered; related...

Edgemont uranium mill decommissioning, Fall River County, South Dakota (adoption as a final environmental impact statement (EIS) of the Nuclear Regulatory Commission's final EIS of September 1982): final environmental impact statement

International Nuclear Information System (INIS)

Anon.

1983-01-01

Decommissioning of the existing uranium milling facilities at Edgemont, South Dakota is proposed. In this adoption by the Tennessee Valley Authority of the Nuclear Regulatory Commission's final environmental impact statement on the decommissioning, no significant deviations from that statement are presented. The project would prevent human exposure to radioactive material emitted by the defunct mill and its ancillary facilities. Reclamation of mill and waste impoundment sites would ensure their future usefulness for wildlife habitat and other purposes. Grading operations could result in occasional particulate levels that exceed federal air quality standards. As much as 105 acre-feet of water could be removed from the Pahasapa Aquifer. Disturbance of soils at the sites would degrade the quality of these soils. Approximately 501 acres of land, including 30 acres of land to be used as haul roads, would be denuded; 86 acres of farmland within the disposal site would be lost. All aquatic communities in Cottonwood Creek would be destroyed during cleanup operations, although the creek would be repopulated. Winddown tailings would increase downwind radiation levels during decommissioning activities

Sudbury neutrino observatory proposal

International Nuclear Information System (INIS)

Ewan, G.T.; Evans, H.C.; Lee, H.W.

1987-10-01

This report is a proposal by the Sudbury Neutrino Observatory (SNO) collaboration to develop a world class laboratory for neutrino astrophysics. This observatory would contain a large volume heavy water detector which would have the potential to measure both the electron-neutrino flux from the sun and the total solar neutrino flux independent of neutrino type. It will therefore be possible to test models of solar energy generation and, independently, to search for neutrino oscillations with a sensitivity many orders of magnitude greater than that of terrestrial experiments. It will also be possible to search for spectral distortion produced by neutrino oscillations in the dense matter of the sun. Finally the proposed detector would be sensitive to neutrinos from a stellar collapse and would detect neutrinos of all types thus providing detailed information on the masses of muon- and tau-neutrinos. The neutrino detector would contain 1000 tons of D20 and would be located more than 2000 m below ground in the Creighton mine near Sudbury. The operation and performance of the proposed detector are described and the laboratory design is presented. Construction schedules and responsibilities and the planned program of technical studies by the SNO collaboration are outlined. Finally, the total capital cost is estimated to be $35M Canadian and the annual operating cost, after construction, would be $1.8 M Canadian, including the insurance costs of the heavy water

Technical bases for criticality safety standards

International Nuclear Information System (INIS)

Clayton, E.D.

1980-01-01

An American National Standard implies a consensus of those substantially concerned with its scope and provisions. The technical basis, or foundation, on which the consensus rests, must in turn, be firmly established and documented for public review. The technical bases are discussed and reviewed of several standards in different stages of completion and acceptance: ANSI/ANS-8.12, 1978, Nuclear Criticality Control and Safety of Homogeneous Plutonium - Uranium Mixtures Outside Reactors (Approved July 17, 1978); ANS-815, Nuclear Criticality Control of Special Actinide Elements (Draft No. 5 of newly proposed standard); ANS-8.14, Use of Solutions of Neutron Absorbers for Criticality Control (Draft No. 4 of newly proposed standard); ANS-8.5 (Revision of N16.4, 1971), Use of Borosilicate-Glass Raschig Rings as a Neutron Absorber in Solutions of Fissile Material (Draft No. 5 as a result of prescribed five-year review and update of old standard). In each of the preceding, the newly proposed (or revised) limits are based on the extension of experimental data via well established calculations, or by means of independent calculations with adequate margins for uncertainties. The four cases serve to illustrate the insight of the work group members in the establishment of the technical bases for the limits and the level of activity required on their part in the preparation of ANSI Standards. A time span of from four up to seven years has not been uncommon for the preparation, review, and acceptance of an ANSI Standard. 8 figures. 7 tables

Providing pervasive Learning eXperiences by Combining Internet of Things and e-Learning standards

Directory of Open Access Journals (Sweden)

Aroua TAAMALLAH

2015-12-01

Full Text Available Nowadays, learning is more and more taking place anywhere and anytime. This implies that e-learning environments are expanded from only virtual learning environments to both virtual and physical ones. Thanks to the evolution of Internet, ICT (Information and Communication Technology and Internet of Things, new learning scenarios could be experienced by learners either individually or collaboratively. These learning scenarios are Pervasive in such a way that they allow to mix virtual and physical learning environments as well. They are therefore characterized by possible interactions of the learner with the physical environment, the Learner's contextual data detection as well as the adaptation of pedagogical strategies and services according to this context. This paper aims to take advantage of this trend and keep up also with existing e-Learning standards such as IMS LD and LOM. The solution proposed is therefore to extend these standards models with that of Internet of Things and to provide an adaptation approach of learning activities based on learner's context and her/his track using the eXperience API. In this context and in order to allow both reasoning capabilities and interoperability between the proposed models Ontological representations and implementation are therefore proposed. Moreover a technical architecture highlighting the required software components and their interactions is provided. And finally, a relevant pervasive learning scenario is implemented and experimented.

25 CFR 900.125 - What shall a construction contract proposal contain?

Science.gov (United States)

2010-04-01

... organization shall also include in its construction contract proposal the following: (1) In the case of a... accept the tribally proposed standards; and (2) In the case of a contract for construction activities... methods (including national, regional, state, or tribal building codes or construction industry standards...

Determination of trace elements in standard reference materials by the ko-standardization method

International Nuclear Information System (INIS)

Smodis, B.; Jacimovic, R.; Stegnar, P.; Jovanovic, S.

1990-01-01

The k o -standardization method is suitable for routine multielement determinations by reactor neutron activation analysis (NAA). Investigation of NIST standard reference materials SRM 1571 Orchard Leaves, SRM 1572 Citrus leaves, and SRM 1573 Tomato Leaves showed the systematic error of 12 certified elements determined to be less than 8%. Thirty-four elements were determined in NIST proposed SRM 1515 Apple Leaves

STANDARDIZED TERMINOLOGY OF ADULT SPINE DEFORMITY FOR BRAZILIAN PORTUGUESE

Directory of Open Access Journals (Sweden)

Raphael de Rezende Pratali

2015-12-01

Full Text Available Objective : To develop a consensus for translation of the most relevant terms used in the study of Adult Spinal Deformity, from their original languages into Brazilian Portuguese. Methods : A panel of 12 experts in spine surgery from the five Brazilian regions was constituted. To obtain the standardization of terminology, the Delphi method with an electronic questionnaire was administered to participants about their opinion on the translation of 13 relevant terms chosen by literature review. Each term was considered standard when there was consensus, that is, concordance higher than 80% among participants as to the suggestion to be adopted, and then on the acceptance of the term and its abbreviation in Portuguese. Results : Initially there was consensus (over 80% concordance on the translation of seven terms in the electronic questionnaire. The other six terms that have not reached consensus were discussed at a meeting among the participants, relying on the opinion of a specialized professional in simultaneous translation of orthopedic terms in Portuguese and other professional majored in Portuguese language. It was decided how these terms should be translated and there was a consensus among all participants regarding their acceptance. Finally, there was consensus among the participants, who agreed with the translation and abbreviation of the 13 propose terms, defining its standardization for Brazilian Portuguese. Conclusion : We present a standard terminology used in the study of Adult Spinal Deformity through consensus among experts, seeking uniformity in the use of these terms in Brazilian Portuguese.

75 FR 31691 - Safety Standard for Infant Bath Seats: Final Rule

Science.gov (United States)

2010-06-04

... would actually make the requirement less restrictive than what is already in the voluntary standard. For... various water levels and possible head positions of occupants vs. angles of bath seats to determine what... instructional literature or warnings, it is foreseeable that caregivers will install the bath seat on a wet and...

Guidelines for the Standardization of Genital Photography.

Science.gov (United States)

Joumblat, Natalie R; Chim, Jimmy; Sanchez Aguirre, Priscila Gisselle; Bedolla, Edgar; Salgado, Christopher J

2018-02-06

Plastic surgery relies on photography for both clinical practice and research. The Photographic Standards in Plastic Surgery laid the foundation for standardized photography in plastic surgery. Despite these advancements, the current literature lacks guidelines for genital photography, thus resulting in a discordance of documentation. The authors propose photographic standards for the male and female genitalia to establish homogeneity in which information can be accurately exchanged. All medical photographs include a sky-blue background, proper lighting, removal of distractors, consistent camera framing, and standard camera angles. We propose the following guidelines to standardize genital photography. In the anterior upright position, feet are shoulder-width apart and arms are placed posteriorly. The frame is bounded superiorly by the xiphoid-umbilicus midpoint and inferiorly by the patella. For circumferential documentation, frontal 180 degree capture via 45 degree intervals is often sufficient. Images in standard lithotomy position should be captured at both parallel and 45 degrees above the horizontal. Images of the phallus should include both the flaccid and erect states. Despite the increasing incidence of genital procedures, there lacks a standardized methodology in which to document the genitalia, resulting in a substantial heterogeneity in the current literature. Our standardized techniques for genital photography set forth to establish a uniform language that promotes more effective communication with both the patient as well as with colleagues. The proposed photography guidelines provide optimal visualization and standard documentation of the genitalia, allowing for accurate education, meaningful collaborations, and advancement in genital surgery. © 2018 The American Society for Aesthetic Plastic Surgery, Inc. Reprints and permission: journals.permissions@oup.com.

Fabrication and Testing of Pyramidal X- Band Standard Horn Antenna

Directory of Open Access Journals (Sweden)

Hasan F. Khazaal

2017-11-01

Full Text Available Standard horn antennas are an important device to evaluate many types of antennas, since they are used as a reference to any type of antennas within the microwave frequency bands. In this project the fabrication process and tests of standard horn antenna operating at X-band frequencies have been proposed. The fabricated antenna passed through multi stages of processing of its parts until assembling the final product. These stages are (milling, bending, fitting and welding. The assembled antenna subjected to two types of tests to evaluate its performance. The first one is the test by two port network analyzer to point out S & Z parameters, input resistance, and the voltage standing wave ratio of the horn, while the second test was done using un-echoic chamber to measure the gain, side lobes level and the half power beam width. The results of testing come nearly as a theoretical value of the most important of antenna parameters, like; gain, side lobe level, -3 dB beam width, return loss and voltage standing wave ratio "VSWR", input Impedance.

Standardization of the bakery goods

Directory of Open Access Journals (Sweden)

Elżbieta Goryńska-Goldmann

2010-01-01

Full Text Available The article presents selected aspects of the standardization, highly valued factor that stimulates the economic development of the country. The attention was paid to the purpose of the standardization, basic normative documents and standardizing activity. Different proposals for the classification of bread applied in practice or appearing in scientific studies were presented. It was emphasised that currently legal mess exists in Poland, in terms of use of the bread classification. The necessity of legal regulations of this issue by standard regulations was pointed out.

10 CFR 51.92 - Supplement to the final environmental impact statement.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Supplement to the final environmental impact statement. 51...-Regulations Implementing Section 102(2) Final Environmental Impact Statements-General Requirements § 51.92 Supplement to the final environmental impact statement. (a) If the proposed action has not been taken, the...

76 FR 22383 - National Fire Codes: Request for Proposals for Revision of Codes and Standards

Science.gov (United States)

2011-04-21

... Chemical Extinguishing Systems. NFPA 22-2008 Standard for Water 5/23/2011 Tanks for Private Fire Protection... Ensembles for Technical Rescue Incidents. NFPA 1925-2008 Standard on Marine Fire- 5/23/2011 Fighting Vessels... DEPARTMENT OF COMMERCE National Institute of Standards and Technology National Fire Codes: Request...

A proposal for a standard communication protocol for pacemaker/ICD programmers

NARCIS (Netherlands)

Dijk, WA; Hooijschuur, CAM; van der Velde, W; Dassen, WRM

2005-01-01

The information generated by pacemakers and ICD's to support the cardiologist and technician for installing the optimal settings for the patient is increasing rapidly. In this paper a proposal is described for electronic data exchange between the pacemaker/ICD programmers and electronic information

Hot topic - fire resistant clothing for electrical workers has no Canadian standard

Energy Technology Data Exchange (ETDEWEB)

Douglas, R

1996-07-01

Fabrics which could be used for protective clothing for electrical workers was discussed. In Canada there are no stringent clothing rules for the electrical industry, but in the United States, the Federal Occupational Safety and Health Administration (OSHA) have made protective clothing an issue within the industry. Dupont`s Nomex, Westex`s Indura, and Hoechst Celanese`s PBI fibres are among the materials which have been through a series of thermal protection tests and are based on proven materials which are now being applied to work wear. The testing standards cover the ignition of the basic materials, untreated cottons, wools, and the thermal protection of flame resistant materials. The final tests are based on high current arc tests conducted on the fabrics used in the industry. These tests are now being conducted at Ontario Hydro`s High Current Test Facility preliminary to a Canadian standard being formulated and proposed in the very near future. 2 figs.

Standardization and Economics of Nuclear Spacecraft, Final Report, Phase I, Sense Study

Energy Technology Data Exchange (ETDEWEB)

1973-03-01

Feasibility and cost benefits of nuclear-powered standardized spacecraft are investigated. The study indicates that two shuttle-launched nuclear-powered spacecraft should be able to serve the majority of unmanned NASA missions anticipated for the 1980's. The standard spacecraft include structure, thermal control, power, attitude control, some propulsion capability and tracking, telemetry, and command subsystems. One spacecraft design, powered by the radioisotope thermoelectric generator, can serve missions requiring up to 450 watts. The other spacecraft design, powered by similar nuclear heat sources in a Brayton-cycle generator, can serve missions requiring up to 21000 watts. Design concepts and trade-offs are discussed. The conceptual designs selected are presented and successfully tested against a variety of missions. The thermal design is such that both spacecraft are capable of operating in any earth orbit and any orientation without modification. Three-axis stabilization is included. Several spacecraft can be stacked in the shuttle payload compartment for multi-mission launches. A reactor-powered thermoelectric generator system, operating at an electric power level of 5000 watts, is briefly studied for applicability to two test missions of divers requirements. A cost analysis indicates that use of the two standardized spacecraft offers sizable savings in comparison with specially designed solar-powered spacecraft. There is a duplicate copy.

ANSI/ASHRAE/IES Standard 90.1-2013 Determination of Energy Savings: Quantitative Analysis

Energy Technology Data Exchange (ETDEWEB)

Halverson, Mark A.; Athalye, Rahul A.; Rosenberg, Michael I.; Xie, YuLong; Wang, Weimin; Hart, Philip R.; Zhang, Jian; Goel, Supriya; Mendon, Vrushali V.

2014-09-04

This report provides a final quantitative analysis to assess whether buildings constructed according to the requirements of ANSI/ASHRAE/IES Standard 90.1-2013 would result in improved energy efficiency in commercial buildings. The final analysis considered each of the 110 addenda to Standard 90.1-2010 that were included in Standard 90.1-2013. PNNL reviewed all addenda included by ASHRAE in creating Standard 90.1-2013 from Standard 90.1-2010, and considered their combined impact on a suite of prototype building models across all U.S. climate zones. Most addenda were deemed to have little quantifiable impact on building efficiency for the purpose of DOE’s final determination. However, out of the 110 total addenda, 30 were identified as having a measureable and quantifiable impact.

SST: Single-Stream Temporal Action Proposals

KAUST Repository

Buch, Shyamal; Escorcia, Victor; Shen, Chuanqi; Ghanem, Bernard; Niebles, Juan Carlos

2017-01-01

Our paper presents a new approach for temporal detection of human actions in long, untrimmed video sequences. We introduce Single-Stream Temporal Action Proposals (SST), a new effective and efficient deep architecture for the generation of temporal action proposals. Our network can run continuously in a single stream over very long input video sequences, without the need to divide input into short overlapping clips or temporal windows for batch processing. We demonstrate empirically that our model outperforms the state-of-the-art on the task of temporal action proposal generation, while achieving some of the fastest processing speeds in the literature. Finally, we demonstrate that using SST proposals in conjunction with existing action classifiers results in improved state-of-the-art temporal action detection performance.

SST: Single-Stream Temporal Action Proposals

KAUST Repository

Buch, Shyamal

2017-11-09

Our paper presents a new approach for temporal detection of human actions in long, untrimmed video sequences. We introduce Single-Stream Temporal Action Proposals (SST), a new effective and efficient deep architecture for the generation of temporal action proposals. Our network can run continuously in a single stream over very long input video sequences, without the need to divide input into short overlapping clips or temporal windows for batch processing. We demonstrate empirically that our model outperforms the state-of-the-art on the task of temporal action proposal generation, while achieving some of the fastest processing speeds in the literature. Finally, we demonstrate that using SST proposals in conjunction with existing action classifiers results in improved state-of-the-art temporal action detection performance.

Waste Isolation Pilot Plant: Final supplement environmental impact statement

International Nuclear Information System (INIS)

1990-01-01

The purpose of this Supplement Environmental Impact Statement (SEIS) is to update the environmental record established in 1980 by evaluating the environmental impacts associated with new information, new circumstances, and proposal modifications. This SEIS evaluates and compares the Proposed Action and two alternatives. This final SEIS for the WIPP project is a revision of the draft SEIS published in April 1989. It includes responses to the public comments received in writing and at the public hearings and revisions of the draft SEIS in response to the public comments. Revisions of importance have been identified in this final SEIS by vertical lines in the margins to highlight changes made in response to comments. Volumes 1 through 3 of the final SEIS contain the text, appendices, and the summary comments and responses, respectively. Volumes 6 through 13 of the final SEIS contain reproductions of all of the comments received on the draft SEIS, and Volumes 4 and 5 contain the indices to Volumes 6 through 13. An Executive Summary and/or Volumes 1 through 5 of the final SEIS have been distributed to those who received the draft SEIS or requested a copy of the final SEIS. Volume 5 contains indices to public comments

Standardization of the bakery goods

OpenAIRE

Elżbieta Goryńska-Goldmann

2010-01-01

The article presents selected aspects of the standardization, highly valued factor that stimulates the economic development of the country. The attention was paid to the purpose of the standardization, basic normative documents and standardizing activity. Different proposals for the classification of bread applied in practice or appearing in scientific studies were presented. It was emphasised that currently legal mess exists in Poland, in terms of use of the bread classification. The necessi...

International comparison of AC-DC current transfer standards

Science.gov (United States)

Heine, G.; Garcocz, M.; Waldmann, W.

2017-01-01

The measurements of the international comparison of ac-dc current transfer standards identified as EURAMET.EM-K12 started in June 2012 and were completed in December 2014. Twenty NMIs in the EURAMET region and one NMI in the AFRIMET region took part: BEV (Austria), CMI (Czech Republic), PTB (Germany), METAS (Switzerland), JV (Norway), UME (Turkey), GUM (Poland), IPQ (Portugal), CEM (Spain), INRIM (Italy), SP (Sweden), DANIAmet-MI-Trescal (Denmark), BIM (Bulgaria), MKEH (Hungary), SIQ (Slovenia), LNE (France), NSAI NML (Ireland), VSL (The Netherlands), NPL (United Kingdom), Metrosert (Estonia), NIS (Egypt). The comparison was proposed to link the National Metrology Institutes organised in EURAMET to the key comparison CCEM-K12. The ac-dc current transfer difference of each travelling standard had been measured at its nominal current 10 mA and 5 A at the following frequencies: 10 Hz, 55 Hz, 1 kHz, 10 kHz, 20 kHz, 50 kHz, 100 kHz. The test points were selected to link the results with the equivalent CCEM Key Comparison (CCEM-K12), through five NMIs participating in both EURAMET and CCEM key comparisons (PTB, JV, NPL, SP and BEV). The report shows the degree of equivalence in the EURAMET region and also the degree of equivalence with the corresponding CCEM reference value. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCEM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

Amendments to the U.S. Environmental Protection Agency's public health and environmental radiation protection standards for Yucca Mountain, Nevada (40 CFR PART 197) - 16156

International Nuclear Information System (INIS)

Clark, Raymond L.; Czyscinski, Kenneth; Rosnick, Reid J.; Schultheisz, Daniel

2009-01-01

In 2001, as directed by the Energy Policy Act of 1992, the United States Environmental Protection Agency (EPA) issued public health and environmental radiation protection standards for the proposed repository at Yucca Mountain, Nevada. Several parties sued the Agency on numerous aspects of the rule. A Federal Court upheld EPA on all counts except for the compliance period associated with the individual-protection standard, which the Agency had limited to 10,000 years for a number of technical and policy reasons. However, the National Academy of Sciences WAS) had recommended that the standard be set for the time of peak risk, within the limits imposed by the long-term stability of the geologic environment, which NAS estimated at 1 million years. EPA's standards required that the Department of Energy (DOE) project doses to the time of peak dose but did not apply a compliance standard to these longer term projections. The Court ruled that EPA's 10,000-year compliance period was inconsistent with the NAS recommendation. This aspect of the rule was vacated and remanded to the Agency for revision. In 2005, EPA proposed amendments to the standards. Following public hearings and a public review period, the final amendments were issued in September 2008. This paper discusses the new requirements. (authors)

Evaluating Living Standard Indicators

Directory of Open Access Journals (Sweden)

Birčiaková Naďa

2015-09-01

Full Text Available This paper deals with the evaluation of selected available indicators of living standards, divided into three groups, namely economic, environmental, and social. We have selected six countries of the European Union for analysis: Bulgaria, the Czech Republic, Hungary, Luxembourg, France, and Great Britain. The aim of this paper is to evaluate indicators measuring living standards and suggest the most important factors which should be included in the final measurement. We have tried to determine what factors influence each indicator and what factors affect living standards. We have chosen regression analysis as our main method. From the study of factors, we can deduce their impact on living standards, and thus the value of indicators of living standards. Indicators with a high degree of reliability include the following factors: size and density of population, health care and spending on education. Emissions of carbon dioxide in the atmosphere also have a certain lower degree of reliability.

Nomenclature proposal to describe vocal fold motion impairment

NARCIS (Netherlands)

Rosen, Clark A.; Mau, Ted; Remacle, Marc; Hess, Markus; Eckel, Hans E.; Young, VyVy N.; Hantzakos, Anastasios; Yung, Katherine C.; Dikkers, Frederik G.

2016-01-01

The terms used to describe vocal fold motion impairment are confusing and not standardized. This results in a failure to communicate accurately and to major limitations of interpreting research studies involving vocal fold impairment. We propose standard nomenclature for reporting vocal fold

Nomenclature proposal to describe vocal fold motion impairment

NARCIS (Netherlands)

Rosen, Clark A.; Mau, Ted; Remacle, Marc; Hess, Markus; Eckel, Hans E.; Young, VyVy N.; Hantzakos, Anastasios; Yung, Katherine C.; Dikkers, Frederik G.

The terms used to describe vocal fold motion impairment are confusing and not standardized. This results in a failure to communicate accurately and to major limitations of interpreting research studies involving vocal fold impairment. We propose standard nomenclature for reporting vocal fold

75 FR 37733 - Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard Program

Science.gov (United States)

2010-06-30

... Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard Program AGENCY... direct final rule to amend the Renewable Fuel Standard program requirements on May 10, 2010. Because EPA... Fuel Standard program requirements, published on May 10, 2010. We stated in that direct final rule that...

Pharmaceutical Options for Triggering of Final Oocyte Maturation in ART

DEFF Research Database (Denmark)

Castillo, Juan Carlos; Humaidan, Peter; Bernabéu, Rafael

2014-01-01

Since the pioneering days of in vitro fertilization, hCG has been the gold standard to induce final follicular maturation. We herein reviewed different pharmaceutical options for triggering of final oocyte maturation in ART. The new upcoming agent seems to be GnRHa with its potential advantages o...

A proposal for a code of ethics for nurse practitioners.

Science.gov (United States)

Peterson, Moya; Potter, Robert Lyman

2004-03-01

To review established codes for health care professionals and standards of practice for the nurse practitioner (NP) and to utilize these codes and standards, general ethical themes, and a new ethical triangle to propose an ethical code for NPs. Reviews of three generally accepted ethical themes (deontological, teleological, and areteological), the ethical triangle by Potter, the American Academy of Nurse Practitioners (AANP) standards of practice for NPs, and codes of ethics from the American Nurses Association (ANA) and the American Medical Association (AMA). A proposal for a code of ethics for NPs is presented. This code was determined by basic ethical themes and established codes for nursing, formulated by the ANA, and for physicians, formulated by the AMA. The proposal was also developed in consideration of the AANP standards of practice for NPs. The role of the NP is unique in its ethical demands. The authors believe that the expanded practice of NPs presents ethical concerns that are not addressed by the ANA code and yet are relevant to nursing and therefore different than the ethical concerns of physicians. This proposal attempts to broaden NPs' perspective of the role that ethics should hold in their professional lives.

77 FR 72702 - Small Business Size Standards: Information

Science.gov (United States)

2012-12-06

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AG26 Small Business Size Standards: Information AGENCY: U.S. Small Business Administration. ACTION: Final rule. SUMMARY: The United States Small Business Administration (SBA) is increasing the receipts based small business size standards for 15...

76 FR 34890 - Track Safety Standards; Concrete Crossties

Science.gov (United States)

2011-06-15

...-0007, Notice No. 3] RIN 2130-AC01 Track Safety Standards; Concrete Crossties AGENCY: Federal Railroad... effective concrete crossties, for rail fastening systems connected to concrete crossties, and for automated inspections of track constructed with concrete crossties. The Track Safety Standards were amended via final...

An accurate on-site calibration system for electronic voltage transformers using a standard capacitor

Science.gov (United States)

Hu, Chen; Chen, Mian-zhou; Li, Hong-bin; Zhang, Zhu; Jiao, Yang; Shao, Haiming

2018-05-01

Ordinarily electronic voltage transformers (EVTs) are calibrated off-line and the calibration procedure requires complex switching operations, which will influence the reliability of the power grid and induce large economic losses. To overcome this problem, this paper investigates a 110 kV on-site calibration system for EVTs, including a standard channel, a calibrated channel and a PC equipped with the LabView environment. The standard channel employs a standard capacitor and an analogue integrating circuit to reconstruct the primary voltage signal. Moreover, an adaptive full-phase discrete Fourier transform (DFT) algorithm is proposed to extract electrical parameters. The algorithm involves the process of extracting the frequency of the grid, adjusting the operation points, and calculating the results using DFT. In addition, an insulated automatic lifting device is designed to realize the live connection of the standard capacitor, which is driven by a wireless remote controller. A performance test of the capacitor verifies the accurateness of the standard capacitor. A system calibration test shows that the system ratio error is less than 0.04% and the phase error is below 2‧, which meets the requirement of the 0.2 accuracy class. Finally, the developed calibration system was used in a substation, and the field test data validates the availability of the system.

Certifying a university ENT clinic using the ISO 9001:2000 international standard.

Science.gov (United States)

Helbig, Matthias; Helbig, Silke; Kahla-Witzsch, Heike A; Kroll, Tobias; May, Angelika

2010-01-01

Against statutory duties to introduce quality management systems, the increased importance of this subject has led to numerous activities in various public health institutions. Following the International Standardization Organization (ISO 9001:2000) prerequisites, Frankfurt Goethe University Hospital ENT clinic staff introduced a quality management system. This paper aims to investigate this process. Designing, planning and implementing the quality management system is described. Under the supervision of an executive quality management board, clinic quality goals were defined. Thereafter, several quality management teams performed an actual state analysis as well as developing and realising improvement proposals. Finally a quality management manual containing binding standards and working instructions concerning all patient care, research and teaching aspects was written. Successful certification by a neutral body ascertained that the clinic's quality management system conformed to current national and international standards while restructuring and reform improved procedural efficiency. The paper shows that mplementing the quality management system requires considerable effort but patients as well as staff profit considerably from the innovation. On the whole, the positive impact on structure and workflow in a specialist clinic predominates. Therefore, implementing a quality management system in all the clinic's wards and departments is recommended.

Classification via Clustering for Predicting Final Marks Based on Student Participation in Forums

Science.gov (United States)

Lopez, M. I.; Luna, J. M.; Romero, C.; Ventura, S.

2012-01-01

This paper proposes a classification via clustering approach to predict the final marks in a university course on the basis of forum data. The objective is twofold: to determine if student participation in the course forum can be a good predictor of the final marks for the course and to examine whether the proposed classification via clustering…

Non-resonant Higgs-pair production in the b anti bb anti b final state at the LHC

Energy Technology Data Exchange (ETDEWEB)

Wardrope, David; Jansen, Eric; Konstantinidis, Nikos; Cooper, Ben; Falla, Rebecca; Norjoharuddeen, Nurfikri [University College London, Department of Physics and Astronomy, London (United Kingdom)

2015-05-15

We present a particle-level study of the Standard Model non-resonant Higgs-pair production process in the b anti bb anti b final state, at the Large Hadron Collider at √(s) = 14 TeV. Each Higgs boson is reconstructed from a pair of close-by jets formed with the anti-k{sub t} jet clustering algorithm, with radius parameter R = 0.4. Given the kinematic properties of the produced Higgs bosons, this Higgs reconstruction approach appears to be more suitable than the use of largeradius jets that was previously proposed in the literature.We find that the sensitivity for observing this final state can be improved significantly when the full set of uncorrelated angular and kinematic variables of the 4b system is exploited, leading to a statistical significance of 1.8 per experiment with an integrated luminosity of 3 ab{sup -1}. (orig.)

Crew Transportation Operations Standards

Science.gov (United States)

Mango, Edward J.; Pearson, Don J. (Compiler)

2013-01-01

The Crew Transportation Operations Standards contains descriptions of ground and flight operations processes and specifications and the criteria which will be used to evaluate the acceptability of Commercial Providers' proposed processes and specifications.

Ground Combat Training Squadron Complex Final Environmental Assessment

Science.gov (United States)

2011-08-01

Squadron E nvironm ental A ssessm ent Page 1-6 Eglin A ir Force Base, FL Final Figure 1-2. R esources N ot C arried Forw ard for D etailed A...Base, FL Final Figure 3-1. W ater R esources w ithin or near the Proposed A ction or A lternative L ocations Legend c::J Project Sites 1 00...bat T raining Squadron E nvironm ental A ssessm ent Page 3-14 Eglin A ir Force Base, FL Final Figure 3-3. B iological R esources w ithin or

Methodology proposal for estimation of carbon storage in urban green areas

NARCIS (Netherlands)

Schröder, C.; Mancosu, E.; Roerink, G.J.

2013-01-01

Methodology proposal for estimation of carbon storage in urban green areas; final report. Subtitle: Final report of task Task 262-5-6 "Carbon sequestration in urban green infrastructure" Project manager Marie Cugny-Seguin. Date: 15-10-2013

Innovation Process Planning Model in the Bpmn Standard

Directory of Open Access Journals (Sweden)

Jurczyk-Bunkowska Magdalena

2013-12-01

Full Text Available The aim of the article is to show the relations in the innovation process planning model. The relations argued here guarantee the stable and reliable way to achieve the result in the form of an increased competitiveness by a professionally directed development of the company. The manager needs to specify the effect while initiating the realisation of the process, has to be achieved this by the system of indirect goals. The original model proposed here shows the standard of dependence between the plans of the fragments of the innovation process which make up for achieving its final goal. The relation in the present article was shown by using the standard Business Process Model and Notation. This enabled the specification of interrelations between the decision levels at which subsequent fragments of the innovation process are planned. This gives the possibility of a better coordination of the process, reducing the time needed for the achievement of its effect. The model has been compiled on the basis of the practises followed in Polish companies. It is not, however, the reflection of these practises, but rather an idealised standard of proceedings which aims at improving the effectiveness of the management of innovations on the operational level. The model shown could be the basis of the creation of systems supporting the decision making, supporting the knowledge management or those supporting the communication in the innovation processes.

Final disposal of radioactive waste

Directory of Open Access Journals (Sweden)

Freiesleben H.

2013-06-01

Full Text Available In this paper the origin and properties of radioactive waste as well as its classification scheme (low-level waste – LLW, intermediate-level waste – ILW, high-level waste – HLW are presented. The various options for conditioning of waste of different levels of radioactivity are reviewed. The composition, radiotoxicity and reprocessing of spent fuel and their effect on storage and options for final disposal are discussed. The current situation of final waste disposal in a selected number of countries is mentioned. Also, the role of the International Atomic Energy Agency with regard to the development and monitoring of international safety standards for both spent nuclear fuel and radioactive waste management is described.

FY 1999 Report on the technical results. Research and development project for creation of the quick-effect type international standards (Comprehensive surveys); 1999 nendo sokkogata kokusai hyojun sosei kenkyu kaihatsu jigyo seika hokokusho. Sogo chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Safety, environment protection and internationality are most important product qualities, and international standardization of product qualities and testing methods are essential for strengthening international competitiveness. Viewed from this angle, the R and D project is conducted to propose the international standards for the following 5 areas related to environment and safety, selected in expectation that the results could be obtained in short time for preparation of the international proposals; (1) standardization of the wireless IC tags for logistics management, (2) standardization of quality and testing methods of automobile fuels and lubricants, (3) research and development for international standards in the field of safety of machinery, (4) standardization of evaluation methods for electronic data security system, and (5) standardization for the safety of light emitting diodes. The results are obtained for preparation of the international standard drafts, interim or final. The activities are directed to promotion of international interchangeability of radio frequency identification (RFID) systems for area (1); to standardization of the systems for emergency stopping/controlling machines for the area (3), to improvement of security evaluation standards of existing information systems for the area (4), and to unification of the ISO/IEC safety standards for the area (5). (NEDO)

76 FR 12863 - National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion...

Science.gov (United States)

2011-03-09

... National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines... combustion engines. The final rule was published on August 20, 2010. This direct final action amends certain... Emission Standards for Hazardous Air Pollutant for Stationary Reciprocating Internal Combustion Engines...

Sewage Sludge Incinerators: Final Standards of Performance for New Stationary Sources and Emission Guidelines for Existing Sources Final Rule Fact Sheets

Science.gov (United States)

This page contains a February 2011 fact sheet with information regarding the final NSPS and Emission Guidelines for Existing Sources for Sewage Sludge Incinerators (SSI). This document provides a summary of the information for these regulations.

Accounting Standards: What Do They Mean?

Science.gov (United States)

Farley, Jerry B.

1992-01-01

Four recent and proposed changes in national school accounting standards have significant policy implications for colleges and universities. These changes address (1) standards regarding postemployment benefits other than pensions, (2) depreciation, (3) financial report format, and (4) contributions and pledges made to the school. Governing boards…

Piping benchmark problems for the ABB/CE System 80+ Standardized Plant

International Nuclear Information System (INIS)

Bezler, P.; DeGrassi, G.; Braverman, J.; Wang, Y.K.

1994-07-01

To satisfy the need for verification of the computer programs and modeling techniques that will be used to perform the final piping analyses for the ABB/Combustion Engineering System 80+ Standardized Plant, three benchmark problems were developed. The problems are representative piping systems subjected to representative dynamic loads with solutions developed using the methods being proposed for analysis for the System 80+ standard design. It will be required that the combined license licensees demonstrate that their solution to these problems are in agreement with the benchmark problem set. The first System 80+ piping benchmark is a uniform support motion response spectrum solution for one section of the feedwater piping subjected to safe shutdown seismic loads. The second System 80+ piping benchmark is a time history solution for the feedwater piping subjected to the transient loading induced by a water hammer. The third System 80+ piping benchmark is a time history solution of the pressurizer surge line subjected to the accelerations induced by a main steam line pipe break. The System 80+ reactor is an advanced PWR type

Peer Review of Assessment Network: Supporting Comparability of Standards

Science.gov (United States)

Booth, Sara; Beckett, Jeff; Saunders, Cassandra

2016-01-01

Purpose: This paper aims to test the need in the Australian higher education (HE) sector for a national network for the peer review of assessment in response to the proposed HE standards framework and propose a sector-wide framework for calibrating and assuring achievement standards, both within and across disciplines, through the establishment of…

Proposal for inclusion of the risk based inspection technique in Regulatory Standard NR 13; Proposta de inclusao da tecnica de inspecao baseada em risco na Norma Regulamentadora NR 13

Energy Technology Data Exchange (ETDEWEB)

Esteves, Vinicius Teixeira; Lima, Marco Aurelio Oliveira [Det Norske Veritas Ltda. (DNV), Rio de Janeiro, RJ (Brazil)

2012-07-01

In Brazil, the Regulatory Standard n. 13 (NR 13) establishes requirements for the inspection of boilers and pressure vessels which has main objective of preventing accidents with these types of equipment. Additionally, it has the Risk-Based Inspection (RBI) technique as an effective way to manage the mechanical integrity of various types of static mechanical equipment by through an inspection planning based on the risk factor. In this study, it is being proposed to include the RBI technique, in the NR 13, for the planning and definition of periods for the safety inspection of boilers and pressure vessels in order to promote an increase in the operational safety in process industries in Brazil. In this study it was carried out a critical analysis of NR 13 and RBI, and beyond that a bibliographic research of various international documents that relate the operational safety of pressurized equipment with the inspection activity, and the acceptability of RBI by governments, agencies and organizations around the world. It is considered that the inclusion and formal acceptance of RBI technique in the NR 13 must be accompanied by a rigorous control to avoid the 'trivialization' of its use and ensure the implementation rational, efficient and reliable. Finally, it was developed and suggested basic elements and minimum requirements to be inserted in the NR 13, to be attended, in order mandatory, by the companies that choose the implementation and use of the RBI technique as a tool for the planning of safety inspection of boilers and pressure vessels. It is concluded that the formal acceptance of the RBI technique in the NR 13 could aggregate much value to this standard, with regard to the prevention of accidents involving boilers or pressure vessels, and provide a technological jump to the companies that make use of RBI technique in Brazil. (author)

Evolution or revolution? Dismantling the FASB standard on decommissioning costs

International Nuclear Information System (INIS)

Ferguson, J.S.

1996-01-01

The Financial Standards and Accounting Board has issued for comment a draft of proposed financial accounting standards pertaining to nuclear plant decommissioning. This article examines the proposed rules and discusses alternate approaches in those areas in which the author takes issue with the FASB draft

Health effects of water-borne radon: review of a proposed study. Final report

International Nuclear Information System (INIS)

1986-01-01

The Science Advisory Board's Radiation Advisory Committee was requested to review the scientific merit of a proposal to conduct an epidemiological study of radon in indoor air. The Board accepted the request and formed a Radioepidemiology Subcommittee which responded to two overriding scientific issues: Can further epidemiological study contribute to an understanding of the risks of lung cancer associated with household exposures. The Subcommittee concludes that scientific uncertainties in current epidemiological studies (chiefly studies of uranium miners) could be further reduced through direct investigations of the domestic population. Is the proposed study under review by the Office of Research and Development, entitled Health Effects of Waterborne Radon, appropriately designed to address the risk. For reasons cited in the attached report, the Subcommittee concludes that it is not appropriately designed

Application of Standardized ITAAC to the APR1400 Design Certification

Energy Technology Data Exchange (ETDEWEB)

Kang, Deogji; Kim, Yunho [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

Design certification applications (DCAs) submitted pursuant to 10 CFR Part 52 contain two tiers of information, Tier 1 and Tier 2. Tier 1 contains information that is to be certified through rulemaking, and includes the inspections, tests, analyses, and acceptance criteria (ITAAC). Tier 2 contains more detailed information and is the source for information included in Tier1. DC applicants have developed the ITAAC with their own format and contents. This has caused the ineffectiveness of the review process by Nuclear Regulatory Commission (NRC) at the design certification stage. Standardizing the format and content of Tier 1 and ITAAC will achieve greater efficiency and effectiveness for Tier 1 and ITAAC development and NRC review, and for ITAAC implementation and verification. NRC provided the proposed standardized ITAAC for APR1400, and KHNP is considering the application of the proposed ITAAC. The strategy for application of the NRC proposed standardized ITAAC to the APR1400 design certification is now under developing, and a meeting with NRC to review the NRC proposed standardized ITAAC is expected to be held in the near future. In this review process, establishment of industry position on the NRC proposed standardized ITAAC is very important. The support from NEI and US industry is expected to be gained.

Application of Standardized ITAAC to the APR1400 Design Certification

International Nuclear Information System (INIS)

Kang, Deogji; Kim, Yunho

2016-01-01

Design certification applications (DCAs) submitted pursuant to 10 CFR Part 52 contain two tiers of information, Tier 1 and Tier 2. Tier 1 contains information that is to be certified through rulemaking, and includes the inspections, tests, analyses, and acceptance criteria (ITAAC). Tier 2 contains more detailed information and is the source for information included in Tier1. DC applicants have developed the ITAAC with their own format and contents. This has caused the ineffectiveness of the review process by Nuclear Regulatory Commission (NRC) at the design certification stage. Standardizing the format and content of Tier 1 and ITAAC will achieve greater efficiency and effectiveness for Tier 1 and ITAAC development and NRC review, and for ITAAC implementation and verification. NRC provided the proposed standardized ITAAC for APR1400, and KHNP is considering the application of the proposed ITAAC. The strategy for application of the NRC proposed standardized ITAAC to the APR1400 design certification is now under developing, and a meeting with NRC to review the NRC proposed standardized ITAAC is expected to be held in the near future. In this review process, establishment of industry position on the NRC proposed standardized ITAAC is very important. The support from NEI and US industry is expected to be gained

78 FR 8577 - Final Environmental Impact Statement; Izembek National Wildlife Refuge Proposed Land Exchange...

Science.gov (United States)

2013-02-06

... the threatened Steller's eider, threatened sea otter, threatened Steller sea lion, tundra swan, black... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R7-R-2012-N206; FXRS12650700000-134.... SUMMARY: We, the U.S. Fish and Wildlife Service (Service), announce the availability of a final...

Proposal and Evaluation of Subordinate Standard Solar Irradiance Spectra for Applications in Solar Energy Systems

Energy Technology Data Exchange (ETDEWEB)

Habte, Aron M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jessen, Wilko [German Aerospace Center (DLR); Wilbert, Stefan [German Aerospace Center (DLR); Gueymard, Christian A. [Solar Consulting Services; Polo, Jesus [CIEMAT; Bian, Zeqiang [China Meteorological Administration; Driesse, Anton [Photovoltaic Performance Labs; Marzo, Aitor [University of Antofagasta; Armstrong, Peter [Masdar Institute of Science & Technology; Vignola, Frank [University of Oregon; Ramirez, Lourdes [CIEMAT

2018-04-01

Reference solar irradiance spectra are needed to specify key parameters of solar technologies such as photovoltaic cell efficiency, in a comparable way. The IEC 60904-3 and ASTM G173 standards present such spectra for Direct Normal Irradiance (DNI) and Global Tilted Irradiance (GTI) on a 37 degrees tilted sun-facing surface for one set of clear-sky conditions with an air mass of 1.5 and low aerosol content. The IEC/G173 standard spectra are the widely accepted references for these purposes. Hence, the authors support the future replacement of the outdated ISO 9845 spectra with the IEC spectra within the ongoing update of this ISO standard. The use of a single reference spectrum per component of irradiance is important for clarity when comparing and rating solar devices such as PV cells. However, at some locations the average spectra can differ strongly from those defined in the IEC/G173 standards due to widely different atmospheric conditions and collector tilt angles. Therefore, additional subordinate standard spectra for other atmospheric conditions and tilt angles are of interest for a rough comparison of product performance under representative field conditions, in addition to using the main standard spectrum for product certification under standard test conditions. This simplifies the product selection for solar power systems when a fully-detailed performance analysis is not feasible (e.g. small installations). Also, the effort for a detailed yield analyses can be reduced by decreasing the number of initial product options. After appropriate testing, this contribution suggests a number of additional spectra related to eight sets of atmospheric conditions and tilt angles that are currently considered within ASTM and ISO working groups. The additional spectra, called subordinate standard spectra, are motivated by significant spectral mismatches compared to the IEC/G173 spectra (up to 6.5%, for PV at 37 degrees tilt and 10-15% for CPV). These mismatches

77 FR 15794 - Final Environmental Impact Statement for the Proposed KRoad Moapa Solar Generation Facility...

Science.gov (United States)

2012-03-16

... benefits for the Tribe by using solar resources from reservation lands where exposure to levels of high... energy goals, by providing electricity generated from solar resources from tribal lands that may be...'s purpose and need for the proposed Federal action is to respond to the proposed solar energy ground...

77 FR 42988 - Updating OSHA Construction Standards Based on National Consensus Standards; Head Protection...

Science.gov (United States)

2012-07-23

.... OSHA-2011-0184] RIN 1218-AC65 Updating OSHA Construction Standards Based on National Consensus... Administration (OSHA), Department of Labor. ACTION: Direct final rule; correction. SUMMARY: OSHA is correcting a... confusion resulting from a drafting error. OSHA published the DFR on June 22, 2012 (77 FR 37587). OSHA also...

Standard model without Higgs particles

International Nuclear Information System (INIS)

Kovalenko, S.G.

1992-10-01

A modification of the standard model of electroweak interactions with the nonlocal Higgs sector is proposed. Proper form of nonlocality makes Higgs particles unobservable after the electroweak symmetry breaking. They appear only as a virtual state because their propagator is an entire function. We discuss some specific consequences of this approach comparing it with the conventional standard model. (author). 12 refs

Charmless Hadronic B Decays into Vector, Axial Vector and Tensor Final States at BaBar

International Nuclear Information System (INIS)

Gandini, Paolo

2012-01-01

We present experimental measurements of branching fraction and longitudinal polarization fraction in charmless hadronic B decays into vector, axial vector and tensor final states with the final dataset of BABAR. Measurements of such kind of decays are a powerful tool both to test the Standard Model and search possible sources of new physics. In this document we present a short review of the last experimental results at BABAR concerning charmless quasi two-body decays in final states containing particles with spin 1 or spin 2 and different parities. This kind of decays has received considerable theoretical interest in the last few years and this particular attention has led to interesting experimental results at the current b-factories. In fact, the study of longitudinal polarization fraction f L in charmless B decays to vector vector (VV), vector axial-vector (VA) and axial-vector axial-vector (AA) mesons provides information on the underlying helicity structure of the decay mechanism. Naive helicity conservation arguments predict a dominant longitudinal polarization fraction f L ∼ 1 for both tree and penguin dominated decays and this pattern seems to be confirmed by tree-dominated B → ρρ and B + → (Omega)ρ + decays. Other penguin dominated decays, instead, show a different behavior: the measured value of f L ∼ 0.5 in B → φK* decays is in contrast with naive Standard Model (SM) calculations. Several solutions have been proposed such as the introduction of non-factorizable terms and penguin-annihilation amplitudes, while other explanations invoke new physics. New modes have been investigated to shed more light on the problem.

New off-road engines for TIER 4 final; Neue Offroad-Motoren fuer Tier 4 final

Energy Technology Data Exchange (ETDEWEB)

Adt, Hans-Ulrich; Lehmann, Henrik [MTU Friedrichshafen GmbH, Friedrichshafen (Germany); Herter, Yvonne; Weidler, Alexander [Daimler AG, Stuttgart (Germany). Baureihe 1000

2013-03-15

To meet the off-road emission standards EU IV and EPA Tier 4 final, as of 2014 the Tognum Group will be offering newly developed engines of the Series 1000 to 1500. These MTU brand diesel engines deliver outputs ranging from 100 to 460 kW and are designed to power agricultural and forestry machinery and construction as well as special-purpose machinery. (orig.)

The qualitative research proposal

Directory of Open Access Journals (Sweden)

H Klopper

2008-09-01

Full Text Available Qualitative research in the health sciences has had to overcome many prejudices and a number of misunderstandings, but today qualitative research is as acceptable as quantitative research designs and is widely funded and published. Writing the proposal of a qualitative study, however, can be a challenging feat, due to the emergent nature of the qualitative research design and the description of the methodology as a process. Even today, many sub-standard proposals at post-graduate evaluation committees and application proposals to be considered for funding are still seen. This problem has led the researcher to develop a framework to guide the qualitative researcher in writing the proposal of a qualitative study based on the following research questions: (i What is the process of writing a qualitative research proposal? and (ii What does the structure and layout of a qualitative proposal look like? The purpose of this article is to discuss the process of writing the qualitative research proposal, as well as describe the structure and layout of a qualitative research proposal. The process of writing a qualitative research proposal is discussed with regards to the most important questions that need to be answered in your research proposal with consideration of the guidelines of being practical, being persuasive, making broader links, aiming for crystal clarity and planning before you write. While the structure of the qualitative research proposal is discussed with regards to the key sections of the proposal, namely the cover page, abstract, introduction, review of the literature, research problem and research questions, research purpose and objectives, research paradigm, research design, research method, ethical considerations, dissemination plan, budget and appendices.

Extensions of the Standard Model

CERN Document Server

Zwirner, Fabio

1996-01-01

Rapporteur talk at the International Europhysics Conference on High Energy Physics, Brussels (Belgium), July 27-August 2, 1995. This talk begins with a brief general introduction to the extensions of the Standard Model, reviewing the ideology of effective field theories and its practical implications. The central part deals with candidate extensions near the Fermi scale, focusing on some phenomenological aspects of the Minimal Supersymmetric Standard Model. The final part discusses some possible low-energy implications of further extensions near the Planck scale, namely superstring theories.

Toward the establishment of standardized in vitro tests for lipid-based formulations, part 4: proposing a new lipid formulation performance classification system.

Science.gov (United States)

Williams, Hywel D; Sassene, Philip; Kleberg, Karen; Calderone, Marilyn; Igonin, Annabel; Jule, Eduardo; Vertommen, Jan; Blundell, Ross; Benameur, Hassan; Müllertz, Anette; Porter, Christopher J H; Pouton, Colin W

2014-08-01

The Lipid Formulation Classification System Consortium looks to develop standardized in vitro tests and to generate much-needed performance criteria for lipid-based formulations (LBFs). This article highlights the value of performing a second, more stressful digestion test to identify LBFs near a performance threshold and to facilitate lead formulation selection in instances where several LBF prototypes perform adequately under standard digestion conditions (but where further discrimination is necessary). Stressed digestion tests can be designed based on an understanding of the factors that affect LBF performance, including the degree of supersaturation generated on dispersion/digestion. Stresses evaluated included decreasing LBF concentration (↓LBF), increasing bile salt, and decreasing pH. Their capacity to stress LBFs was dependent on LBF composition and drug type: ↓LBF was a stressor to medium-chain glyceride-rich LBFs, but not more hydrophilic surfactant-rich LBFs, whereas decreasing pH stressed tolfenamic acid LBFs, but not fenofibrate LBFs. Lastly, a new Performance Classification System, that is, LBF composition independent, is proposed to promote standardized LBF comparisons, encourage robust LBF development, and facilitate dialogue with the regulatory authorities. This classification system is based on the concept that performance evaluations across three in vitro tests, designed to subject a LBF to progressively more challenging conditions, will enable effective LBF discrimination and performance grading. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Managing the financial cost of exception to contracting standards

DEFF Research Database (Denmark)

Henschel, Rene Franz

2008-01-01

In managing financial cost of exception to contracting standards, the first step is to put up an intelligent contract standards exception monitoring system The next step is to maintain tailor-made, fair and transparent contracting standards The third step is to eliminate unnecessary information...... and repetitiveness in contracting standards The fourth step is to enable your organization and the customers or suppliers to handle the necessary exceptions themselves Finally you should consider the use of independent contracting standards and elimination of your own standards as a tool in managing the cost...

An efficient auto TPT stitch guidance generation for optimized standard cell design

Science.gov (United States)

Samboju, Nagaraj C.; Choi, Soo-Han; Arikati, Srini; Cilingir, Erdem

2015-03-01

As the technology continues to shrink below 14nm, triple patterning lithography (TPT) is a worthwhile lithography methodology for printing dense layers such as Metal1. However, this increases the complexity of standard cell design, as it is very difficult to develop a TPT compliant layout without compromising on the area. Hence, this emphasizes the importance to have an accurate stitch generation methodology to meet the standard cell area requirement as defined by the technology shrink factor. In this paper, we present an efficient auto TPT stitch guidance generation technique for optimized standard cell design. The basic idea here is to first identify the conflicting polygons based on the Fix Guidance [1] solution developed by Synopsys. Fix Guidance is a reduced sub-graph containing minimum set of edges along with the connecting polygons; by eliminating these edges in a design 3-color conflicts can be resolved. Once the conflicting polygons are identified using this method, they are categorized into four types [2] - (Type 1 to 4). The categorization is based on number of interactions a polygon has with the coloring links and the triangle loops of fix guidance. For each type a certain criteria for keep-out region is defined, based on which the final stitch guidance locations are generated. This technique provides various possible stitch locations to the user and helps the user to select the best stitch location considering both design flexibility (max. pin access/small area) and process-preferences. Based on this technique, a standard cell library for place and route (P and R) can be developed with colorless data and a stitch marker defined by designer using our proposed method. After P and R, the full chip (block) would contain the colorless data and standard cell stitch markers only. These stitch markers are considered as "must be stitch" candidates. Hence during full chip decomposition it is not required to generate and select the stitch markers again for the

Standardized Testing and the Construction of Governable Persons

Science.gov (United States)

Graham, Cameron; Neu, Dean

2004-01-01

While debates over standardized testing are ubiquitous, there has been relatively little consideration of how today's standardized testing practices have arisen. The current study provides a chronology of standardized testing within Alberta, Canada. Starting from prior work by Foucault and others on "governmentality", we propose that the…

Transportation impacts on the Tennessee highway system proposed monitored retrievable storage. Final report

Energy Technology Data Exchange (ETDEWEB)

Cobble, C.

1985-12-12

The issue of the transport of spent fuels to the proposed monitored retrievable storage facility in Tennessee is discussed. Relevant issues include the ability of the roads and bridges on the transport routes to handle the weight of the trucks. (CBS)

Defense Standardization Program Journal. October/December 2012

Science.gov (United States)

2012-10-01

Barriers to Trade ( TBT ).The WTO TBT agreement establishes principles for interna- tional standardization processes using attributes similar to those...WTO TBT agreement, the proposed standardization regulation states that public authorities should make best use of the full range of relevant

Development of a Conceptual Mapping Standard to Link Building and Geospatial Information

Directory of Open Access Journals (Sweden)

Taewook Kang

2018-04-01

Full Text Available This study introduces the BIM (building information modeling-GIS (geographic information system conceptual mapping (B2GM standard ISO N19166 and proposes a mapping mechanism. In addition, the major issues concerning BIM-GIS integration, and the considerations that it requires, are discussed. The B2GM is currently being standardized by the spatial-information international standardization organization TC211. Previous studies on BIM-GIS integration seem to focus on the integration of different types of model schemas and on the implementation of service interfaces. B2GM concerns the clear definition of the conditions and methods for mapping the object information required from the user’s use-case viewpoint for city-scale mapping. The benefits of the B2GM approach are that the user is able directly control the BIM-GIS linkage and integration process in order to acquire the necessary objection information. This can reveal cases of possibly unclear BIM-GIS integration outside the black box in an explicit and standard way, so that the user can distinctively predict the final output obtainable from the BIM-GIS integration. This study examined B2GM in terms of its development background, components, and several utilization examples, as well as the levels and considerations of the integration of different BIM-GIS models.

Safety-evaluation report related to the final design of the Standard Nuclear Steam Supply Reference System - CESSAR System 80. Docket No. STN 50-470

International Nuclear Information System (INIS)

1983-03-01

Supplement No. 1 to the Safety Evaluation Report for the application filed by Combustion Engineering, Inc. for a Final Design Approval for the Combustion Engineering Standard Safety Analysis Report (STN 50-470) has been prepared by the Office of Nuclear Reactor Regulation of the Nuclear Regulatory Commission. The purpose of this supplement is to update the Safety Evaluation by providing: (1) the evaluation of additional information submitted by the applicant since the Safety Evaluation Report was issued, (2) the evaluation of the matters the staff had under review when the Safety Evaluation Report was issued, and (3) the response to comments made by the Advisory Committee on Reactor Safeguards

Standardization in gully erosion studies: methodology and interpretation of magnitudes from a global review

Science.gov (United States)

Castillo, Carlos; Gomez, Jose Alfonso

2016-04-01

Standardization is the process of developing common conventions or proceedings to facilitate the communication, use, comparison and exchange of products or information among different parties. It has been an useful tool in different fields from industry to statistics due to technical, economic and social reasons. In science the need for standardization has been recognised in the definition of methods as well as in publication formats. With respect to gully erosion, a number of initiatives have been carried out to propose common methodologies, for instance, for gully delineation (Castillo et al., 2014) and geometrical measurements (Casalí et al., 2015). The main aims of this work are: 1) to examine previous proposals in gully erosion literature implying standardization processes; 2) to contribute with new approaches to improve the homogeneity of methodologies and presentation of results for a better communication among the gully erosion community. For this purpose, we evaluated the basic information provided on environmental factors, discussed the delineation and measurement procedures proposed in previous works and, finally, we analysed statistically the severity of degradation levels derived from different indicators at the world scale. As a result, we presented suggestions aiming to serve as guidance for survey design as well as for the interpretation of vulnerability levels and degradation rates for future gully erosion studies. References Casalí, J., Giménez, R., and Campo-Bescós, M. A.: Gully geometry: what are we measuring?, SOIL, 1, 509-513, doi:10.5194/soil-1-509-2015, 2015. Castillo C., Taguas E. V., Zarco-Tejada P., James M. R., and Gómez J. A. (2014), The normalized topographic method: an automated procedure for gully mapping using GIS, Earth Surf. Process. Landforms, 39, 2002-2015, doi: 10.1002/esp.3595

77 FR 37953 - Final Federal Agency Actions on Proposed Bridge Replacement in Massachusetts

Science.gov (United States)

2012-06-25

... Massachusetts Division Office, 55 Broadway, 10th Floor, Cambridge, MA 02142, 617-494-2419, [email protected]dot.gov . For Massachusetts Department of Transportation Highway Division (MassDOT): Michael Furlong, Project... Proposed Bridge Replacement in Massachusetts AGENCY: Federal Highway Administration (FHWA), DOT. ACTION...

New final doublets and power densities for the international linear ...

Indian Academy of Sciences (India)

Abstract. In this paper we use current and proposed final doublet magnet technologies to reoptimise the interaction region of the international linear collider and reduce the power losses. The result is a set of three new final doublet layouts with improved beam transport properties. The effect of localised power deposition and ...

Good standards for smart meters

NARCIS (Netherlands)

Hoenkamp, R.A.; Huitema, G.B.

2012-01-01

This paper examines what lessons can be learned from the rollout of smart meters in the Netherlands to improve the European smart meter standardization. This study is based on the case of the Dutch meter rollout which preparations started in 2005 but finally was delayed until 2011 by governmental

78 FR 39001 - 30-Day Notice of Proposed Information Collection: Uniform Physical Standards and Physical...

Science.gov (United States)

2013-06-28

... Information Collection: Uniform Physical Standards and Physical Inspection Requirements AGENCY: Office of the... Information Collection Title of Information Collection: Uniform Physical Standards and Physical Inspection... for conducting physical inspections of the properties are HUD, the lender or the owner. Owners/Agents...

Extensions of the standard model

International Nuclear Information System (INIS)

Ramond, P.

1983-01-01

In these lectures we focus on several issues that arise in theoretical extensions of the standard model. First we describe the kinds of fermions that can be added to the standard model without affecting known phenomenology. We focus in particular on three types: the vector-like completion of the existing fermions as would be predicted by a Kaluza-Klein type theory, which we find cannot be realistically achieved without some chiral symmetry; fermions which are vector-like by themselves, such as do appear in supersymmetric extensions, and finally anomaly-free chiral sets of fermions. We note that a chiral symmetry, such as the Peccei-Quinn symmetry can be used to produce a vector-like theory which, at scales less than M/sub W/, appears to be chiral. Next, we turn to the analysis of the second hierarchy problem which arises in Grand Unified extensions of the standard model, and plays a crucial role in proton decay of supersymmetric extensions. We review the known mechanisms for avoiding this problem and present a new one which seems to lead to the (family) triplication of the gauge group. Finally, this being a summer school, we present a list of homework problems. 44 references

Prostate Cancer Molecular Imaging Standardized Evaluation (PROMISE): Proposed miTNM Classification for the Interpretation of PSMA-Ligand PET/CT.

Science.gov (United States)

Eiber, Matthias; Herrmann, Ken; Calais, Jeremie; Hadaschik, Boris; Giesel, Frederik L; Hartenbach, Markus; Hope, Thomas; Reiter, Robert; Maurer, Tobias; Weber, Wolfgang A; Fendler, Wolfgang P

2018-03-01

Prostate-specific membrane antigen (PSMA)-ligand PET imaging provides unprecedented accuracy for whole-body staging of prostate cancer. As PSMA-ligand PET/CT is increasingly adopted in clinical trials and routine practice worldwide, a unified language for image reporting is urgently needed. We propose a molecular imaging TNM system (miTNM, version 1.0) as a standardized reporting framework for PSMA-ligand PET/CT or PET/MRI. miTNM is designed to organize findings in comprehensible categories to promote the exchange of information among physicians and institutions. Additionally, flowcharts integrating findings of PSMA-ligand PET and morphologic imaging have been designed to guide image interpretation. Specific applications, such as assessment of prognosis or impact on management, should be evaluated in future trials. miTNM is a living framework that evolves with clinical experience and scientific data. © 2018 by the Society of Nuclear Medicine and Molecular Imaging.

Characterization and standardization of Sabin based inactivated polio vaccine: proposal for a new antigen unit for inactivated polio vaccines.

Science.gov (United States)

Westdijk, Janny; Brugmans, Debbie; Martin, Javier; van't Oever, Aart; Bakker, Wilfried A M; Levels, Lonneke; Kersten, Gideon

2011-04-18

GMP-batches of Sabin-IPV were characterized for their antigenic and immunogenic properties. Antigenic fingerprints of Sabin-IPV reveal that the D-antigen unit is not a fixed amount of antigen but depends on antibody and assay type. Instead of the D-antigen unit we propose standardization of IPV based on a combination of protein amount for dose and D-antigenicity for quality of the vaccine. Although Sabin-IPV type 2 is less immunogenic than regular wild type IPV type 2, the immunogenicity (virus neutralizing titers) per microgram antigen for Sabin-IPV type 2 is in the same order as for wild type serotypes 1 and 3. The latter observations are in line with data from human trials. This suggests that a higher dose of Sabin-IPV type 2 to compensate for the lower rat immunogenicity may not be necessary. Copyright © 2011 Elsevier Ltd. All rights reserved.

On nonlocally interacting metrics, and a simple proposal for cosmic acceleration

Science.gov (United States)

Vardanyan, Valeri; Akrami, Yashar; Amendola, Luca; Silvestri, Alessandra

2018-03-01

We propose a simple, nonlocal modification to general relativity (GR) on large scales, which provides a model of late-time cosmic acceleration in the absence of the cosmological constant and with the same number of free parameters as in standard cosmology. The model is motivated by adding to the gravity sector an extra spin-2 field interacting nonlocally with the physical metric coupled to matter. The form of the nonlocal interaction is inspired by the simplest form of the Deser-Woodard (DW) model, α R1/squareR, with one of the Ricci scalars being replaced by a constant m2, and gravity is therefore modified in the infrared by adding a simple term of the form m21/squareR to the Einstein-Hilbert term. We study cosmic expansion histories, and demonstrate that the new model can provide background expansions consistent with observations if m is of the order of the Hubble expansion rate today, in contrast to the simple DW model with no viable cosmology. The model is best fit by w0~‑1.075 and wa~0.045. We also compare the cosmology of the model to that of Maggiore and Mancarella (MM), m2R1/square2R, and demonstrate that the viable cosmic histories follow the standard-model evolution more closely compared to the MM model. We further demonstrate that the proposed model possesses the same number of physical degrees of freedom as in GR. Finally, we discuss the appearance of ghosts in the local formulation of the model, and argue that they are unphysical and harmless to the theory, keeping the physical degrees of freedom healthy.

NanoSTAIR: A new strategic proposal to impulse standardization in nanotechnology research

NARCIS (Netherlands)

Ipiña, J.M.L. de; Salvi, O.; Hazebrouck, B.; Jovanovic, A.; Carre, F.; Saamanen, A.; Brouwer, D.; Schmitt, M.; Martin, S.

2015-01-01

Nanotechnology is considered one of the key technologies of the 21st century within Europe and a Key-Enabling Technology (KET) by Horizon 2020. Standardization has been identified in H2020 as one of the innovation-support measures by bridging the gap between research and the market, and helping the

Proposed draft standard ANS 11.18: recommendations to facilitate decontamination and decommissioning

International Nuclear Information System (INIS)

Jenkins, C.E.; LaGuardia, T.S.; Jones, J.W.

1981-01-01

The purpose of ANS Standard 11.18 is to recommend design guides to facilitate decontamination and eventual decommissioning of a remotely operated radioactive facility. This design guide contains generic recommendations to assist in the planning, selection and arrangement of equipment and materials, and the protection of surfaces to enhance system decontamination and disassembly

Short communication: final year students' deficits in physical examination skills performance in Germany.

Science.gov (United States)

Krautter, Markus; Diefenbacher, Katja; Koehl-Hackert, Nadja; Buss, Beate; Nagelmann, Lars; Herzog, Wolfgang; Jünger, Jana; Nikendei, Christoph

2015-01-01

The physical examination of patients is an important diagnostic competence, but little is known about the examination skills of final-year medical students. To investigate physical examination skills of final-year medical students. In a cross-sectional study, 40 final-year students were asked to perform a detailed physical examination on standardized patients. Their performances were video-recorded and rated by independent video assessors. Video ratings showed a mean success rate of 40.1 % (SD 8.2). As regards accompanying doctor-patient communication, final-year students achieved a mean of no more than 36.7 % (SD 8.9) in the appropriate use of the corresponding communication items. Our study revealed severe deficits among final-year medical students in performing a detailed physical examination on a standardized patient. Thus, physical examination skills training should aim to improve these deficits while also paying attention to communicative aspects. Copyright © 2015. Published by Elsevier GmbH.

36 CFR 1010.14 - Review of proposals by project applicants.

Science.gov (United States)

2010-07-01

...) With respect to each project proposed for consideration for which the NEPA Compliance Coordinator... the scope and content of the final EA. (e) With respect to each project proposed for consideration for... Trust and who certify that they have no financial or other interest in the outcome of the project, and...

Utility and performance relative to consumer product energy efficiency standards. Final technical report

Energy Technology Data Exchange (ETDEWEB)

Coggins, J.L.

1979-12-14

An investigation of the relative utility and performance of nine major household consumer products covered by the Energy Policy and Conservation Act is summarized. The objective was to define the terms utility and performance, to recommend methods for quantifying these two concepts, and to recommend an approach for dealing with utility and performance issues in the energy efficiency standards program. The definitions developed are: performance of a consumer product is the objective measure of how well, with the expected level of consumer input (following the manufacturer's instructions for installation and operation), the product does its intended job; and utility of a consumer product is a subjective measure, based on the consumer's perception, of the capability of the product to satisfy human needs. Quantification is based on test procedures and consumer survey methods which are largely already in use by industry. Utility and performance issues are important in product classification for prescribing energy efficiency standards. The recommended approach to utility and performance issues and classification is: prior to setting standards, evaluate utility and performance issues in the most quantitative way allowed by resources and schedules in order to develop classification guidelines. This approach requires no changes in existing Department of Energy test procedures.

Final report

Energy Technology Data Exchange (ETDEWEB)

Jarillo-Herrero, Pablo [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

2017-02-07

This is the final report of our research program on electronic transport experiments on Topological Insulator (TI) devices, funded by the DOE Office of Basic Energy Sciences. TI-based electronic devices are attractive as platforms for spintronic applications, and for detection of emergent properties such as Majorana excitations , electron-hole condensates , and the topological magneto-electric effect . Most theoretical proposals envision geometries consisting of a planar TI device integrated with materials of distinctly different physical phases (such as ferromagnets and superconductors). Experimental realization of physics tied to the surface states is a challenge due to the ubiquitous presence of bulk carriers in most TI compounds as well as degradation during device fabrication.

Proposed waste isolation pilot project (WIPP) and impacts in the state of New Mexico: a socio-economic analysis. Final report

International Nuclear Information System (INIS)

Cummings, R.D.; Burness, H.S.; Norton, R.D.

1981-04-01

This document is a final report for research conducted concerning the socio-economic impacts in the State of New Mexico that might attend the construction and operation of the proposed Waste Isolation Pilot Plant (WIPP). The proposed site for the WIPP, known as the Los Medanos site, is in Southeastern New Mexico's Eddy County, some 25 miles east of Carlsbad, New Mexico and some 40 miles from Hobbs, New Mexico, in adjacent Lea County. The purpose as set out in the US Department of Energy's environmental impact statements is for storage of TRU waste from the US defense program and the construction of a research and development area for experiments concerning the isolation of all types of nuclear waste in salt. The intended purpose of the study is to identify, measure (when possible) and assess the range of potential socio-economic impacts in the State that may be attributable to the WIPP. Every effort has been made by the authors to approach this task in an objective manner. In efforts to provide an objective analysis of the WIPP, however, particular attention was required in providing a comprehensive review of potential impacts. This means that however unlikely an impact might seem, the authors have purposely avoided pre-judging the potential magnitude of the impact and have applied their best efforts to measure it. On the other hnd, this study is not intended to provide a definitive calculation regarding the net balance of WIPP-related benefits and costs. To help ensure objectivity, two advisory boards, Technical Advisory Board and Public Advisory Board, were formed at the outset of the project for the purpose of providing periodic reviews of research efforts

PROPOSAL FOR AN UNIFORM DATA STANDARD FOR ICHNOLOGICAL 3D TRACKING AND POST-PROCESSING

Directory of Open Access Journals (Sweden)

MARCO PETRUZZELLI

2011-11-01

Full Text Available Vertebrate fossil tracks have been studied through 3D modelling techniques during the last two decades to improve tracking procedures. Different laser scanners and software have been used during field investigation and this differentiation caused incompatibility between many analysis programs. Post processing procedures are not standardized among scientists and file precision give different results in additionally constrain comparison. The starting point to find a solution to the problem is to point out the main technologies used to collect data in the field. The resulting protocol does not oblige to uniform hardware but it does suggest combining different laser scanners with a minimum post processing to optimize the result. Important inkling would be to use 2D relief as a reference to organize 3D tracking procedures. Saving formats during post processing are improved by setting fixed landmarks integrated in the 3D model in a multitask file. The D.I.C.O.M. medical standard (*.cdm format and the 3D printing international standard (*.stl format when combined, may be a good solution for uniform the format. This approach might be the first step for the standardization of source and derived files and the creation of a worldwide 3D ichnological catalogue. This will allow creating a scientific improvement in terms of reproducibility and comparison of the experience. 

Cement: Administrative tender specifications and standards in Spain

OpenAIRE

Soria Santamaría, Francisco

1991-01-01

The paper describes, in chronological order, the different competent Authorities in Spain and the documents issued by them regarding Cement Regulations and Standards. The origin of the early cement quality Rules is referred to, the issuing of Regulations by the Public Bodies and finally the adoption of National Standards on the one hand, as well as the first initiatives to establish International Standards, especially motivated by the export boom after the Second World War, on the other. ...

Study on AC loss measurements of HTS power cable for standardizing

Science.gov (United States)

Mukoyama, Shinichi; Amemiya, Naoyuki; Watanabe, Kazuo; Iijima, Yasuhiro; Mido, Nobuhiro; Masuda, Takao; Morimura, Toshiya; Oya, Masayoshi; Nakano, Tetsutaro; Yamamoto, Kiyoshi

2017-09-01

High-temperature superconducting power cables (HTS cables) have been developed for more than 20 years. In addition of the cable developments, the test methods of the HTS cables have been discussed and proposed in many laboratories and companies. Recently the test methods of the HTS cables is required to standardize and to common in the world. CIGRE made the working group (B1-31) for the discussion of the test methods of the HTS cables as a power cable, and published the recommendation of the test method. Additionally, IEC TC20 submitted the New Work Item Proposal (NP) based on the recommendation of CIGRE this year, IEC TC20 and IEC TC90 started the standardization work on Testing of HTS AC cables. However, the individual test method that used to measure a performance of HTS cables hasn’t been established as world’s common methods. The AC loss is one of the most important properties to disseminate low loss and economical efficient HTS cables in the world. We regard to establish the method of the AC loss measurements in rational and in high accuracy. Japan is at a leading position in the AC loss study, because Japanese researchers have studied on the AC loss technically and scientifically, and also developed the effective technologies for the AC loss reduction. The JP domestic commission of TC90 made a working team to discussion the methods of the AC loss measurements for aiming an international standard finally. This paper reports about the AC loss measurement of two type of the HTS conductors, such as a HTS conductor without a HTS shield and a HTS conductor with a HTS shield. The AC loss measurement method is suggested by the electrical method..

Light-water reactor pressure vessel surveillance standards

International Nuclear Information System (INIS)

Anon.

1981-01-01

The master matrix standard describes a series of standard practices, guides, and methods for the prediction of neutron-induced changes in light-water reactor (LWR) pressure vessel steels throughout a pressure vessel's service life. Some of these are existing American Society for Testing and Materials (ASTM) standards, some are ASTM standards that have been modified, and some are newly proposed ASTM standards. The current (1) scope, (2) areas of application, (3) interrelationships, and (4) status and time table of development, improvement, validation, and calibration for a series of 16 ASTM standards are defined. The standard also includes a discussion of LWR pressure vessel surveillance - justification, requirements, and status of work

78 FR 17748 - Notice of Final Federal Agency Actions on Proposed Highway in Utah

Science.gov (United States)

2013-03-22

... are 7:30 a.m. to 4:30 p.m. (Mountain Standard Time), Monday through Friday, except Federal holidays...; replacing the I-15 bridges over the Virgin River; converting the existing diamond interchange to a diverging...

78 FR 1256 - Guam Military Base Realignment Contractor Recruitment Standards

Science.gov (United States)

2013-01-08

... Contractor Recruitment Standards AGENCY: Employment and Training Administration, Labor. ACTION: Final notice... issuing this notice to announce recruitment standards that construction contractors are required to follow... B) by adding a new subsection (6). This provision prohibits contractors engaged in construction...

Automatic initial and final segmentation in cleft palate speech of Mandarin speakers.

Directory of Open Access Journals (Sweden)

Ling He

Full Text Available The speech unit segmentation is an important pre-processing step in the analysis of cleft palate speech. In Mandarin, one syllable is composed of two parts: initial and final. In cleft palate speech, the resonance disorders occur at the finals and the voiced initials, while the articulation disorders occur at the unvoiced initials. Thus, the initials and finals are the minimum speech units, which could reflect the characteristics of cleft palate speech disorders. In this work, an automatic initial/final segmentation method is proposed. It is an important preprocessing step in cleft palate speech signal processing. The tested cleft palate speech utterances are collected from the Cleft Palate Speech Treatment Center in the Hospital of Stomatology, Sichuan University, which has the largest cleft palate patients in China. The cleft palate speech data includes 824 speech segments, and the control samples contain 228 speech segments. The syllables are extracted from the speech utterances firstly. The proposed syllable extraction method avoids the training stage, and achieves a good performance for both voiced and unvoiced speech. Then, the syllables are classified into with "quasi-unvoiced" or with "quasi-voiced" initials. Respective initial/final segmentation methods are proposed to these two types of syllables. Moreover, a two-step segmentation method is proposed. The rough locations of syllable and initial/final boundaries are refined in the second segmentation step, in order to improve the robustness of segmentation accuracy. The experiments show that the initial/final segmentation accuracies for syllables with quasi-unvoiced initials are higher than quasi-voiced initials. For the cleft palate speech, the mean time error is 4.4ms for syllables with quasi-unvoiced initials, and 25.7ms for syllables with quasi-voiced initials, and the correct segmentation accuracy P30 for all the syllables is 91.69%. For the control samples, P30 for all the

Appliance Efficiency Standards and Price Discrimination

Energy Technology Data Exchange (ETDEWEB)

Spurlock, Cecily Anna [Univ. of California, Berkeley, CA (United States)

2013-05-08

I explore the effects of two simultaneous changes in minimum energy efficiency and ENERGY STAR standards for clothes washers. Adapting the Mussa and Rosen (1978) and Ronnen (1991) second-degree price discrimination model, I demonstrate that clothes washer prices and menus adjusted to the new standards in patterns consistent with a market in which firms had been price discriminating. In particular, I show evidence of discontinuous price drops at the time the standards were imposed, driven largely by mid-low efficiency segments of the market. The price discrimination model predicts this result. On the other hand, in a perfectly competition market, prices should increase for these market segments. Additionally, new models proliferated in the highest efficiency market segment following the standard changes. Finally, I show that firms appeared to use different adaptation strategies at the two instances of the standards changing.

Final Environmental Statement related to license renewal and power increase for the National Bureau of Standards Reactor: Docket No. 50-184

International Nuclear Information System (INIS)

1982-08-01

This Final Environmental Statement contains an assessment of the environmental impact associated with renewal of Operating License No. TR-5 for the National Bureau of Standards (NBS) reactor for a period of 20 years at a power level of 20 MW. This reactor is located on the 576-acre NBS site near Gaithersburg in Montgomery County, Maryland, about 20 mi northwest of the center of Washington, DC. The reactor is a high-flux heavy-water-moderated, cooled and reflected test reactor, which first went critical on December 7, 1967. Though the reactor was originally designed for 20-MW operation, it has been operating for 14 years at a maximum authorized power level to 10 MW. Program demand is now great enough to warrant operation at a power level of 20 MW. No additional major changes to the physical plant are required to operate at 20 MW

Space Life Sciences at NASA: Spaceflight Health Policy and Standards

Science.gov (United States)

Davis, Jeffrey R.; House, Nancy G.

2006-01-01

In January 2005, the President proposed a new initiative, the Vision for Space Exploration. To accomplish the goals within the vision for space exploration, physicians and researchers at Johnson Space Center are establishing spaceflight health standards. These standards include fitness for duty criteria (FFD), permissible exposure limits (PELs), and permissible outcome limits (POLs). POLs delineate an acceptable maximum decrement or change in a physiological or behavioral parameter, as the result of exposure to the space environment. For example cardiovascular fitness for duty standards might be a measurable clinical parameter minimum that allows successful performance of all required duties. An example of a permissible exposure limit for radiation might be the quantifiable limit of exposure over a given length of time (e.g. life time radiation exposure). An example of a permissible outcome limit might be the length of microgravity exposure that would minimize bone loss. The purpose of spaceflight health standards is to promote operational and vehicle design requirements, aid in medical decision making during space missions, and guide the development of countermeasures. Standards will be based on scientific and clinical evidence including research findings, lessons learned from previous space missions, studies conducted in space analog environments, current standards of medical practices, risk management data, and expert recommendations. To focus the research community on the needs for exploration missions, NASA has developed the Bioastronautics Roadmap. The Bioastronautics Roadmap, NASA's approach to identification of risks to human space flight, revised baseline was released in February 2005. This document was reviewed by the Institute of Medicine in November 2004 and the final report was received in October 2005. The roadmap defines the most important research and operational needs that will be used to set policy, standards (define acceptable risk), and

77 FR 52553 - Standards of Performance for Stationary Gas Turbines; Standards of Performance for Stationary...

Science.gov (United States)

2012-08-29

... still perform the traditional reconstruction analysis, i.e., the owner/operator would compare the total... blending to achieve the applicable SO 2 standard. Under the proposed language, an owner/operator of an...

Fir Filters Compliant with the IEEE Standard for M Class PMU

Directory of Open Access Journals (Sweden)

Duda Krzysztof

2016-12-01

Full Text Available In this paper it is shown that M class PMU (Phasor Measurement Unit reference model for phasor estimation recommended by the IEEE Standard C37.118.1 with the Amendment 1 is not compliant with the Standard. The reference filter preserves only the limits for TVE (total vector error, and exceeds FE (frequency error and RFE (rate of frequency error limits. As a remedy we propose new filters for phasor estimation for M class PMU that are fully compliant with the Standard requirements. The proposed filters are designed: 1 by the window method; 2 as flat-top windows; or as 3 optimal min-max filters. The results for all Standard compliance tests are presented, confirming good performance of the proposed filters. The proposed filters are fixed at the nominal frequency, i.e. frequency tracking and adaptive filter tuning are not required, therefore they are well suited for application in lowcost popular PMUs.

On Logic and Standards for Structuring Documents

Science.gov (United States)

Eyers, David M.; Jones, Andrew J. I.; Kimbrough, Steven O.

The advent of XML has been widely seized upon as an opportunity to develop document representation standards that lend themselves to automated processing. This is a welcome development and much good has come of it. That said, present standardization efforts may be criticized on a number of counts. We explore two issues associated with document XML standardization efforts. We label them (i) the dynamic point and (ii) the logical point. Our dynamic point is that in many cases experience has shown that the search for a final, or even reasonably permanent, document representation standard is futile. The case is especially strong for electronic data interchange (EDI). Our logical point is that formalization into symbolic logic is materially helpful for understanding and designing dynamic document standards.

78 FR 73589 - Energy Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric...

Science.gov (United States)

2013-12-06

... Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric Motors; Proposed... Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric Motors AGENCY... proposes energy conservation standards for a number of different groups of electric motors that DOE has not...

Work Scope for Developing Standards for Emergency Preparedness and Response: Fiscal Year 2004 Final Report

Energy Technology Data Exchange (ETDEWEB)

Stenner, Robert D.

2005-09-28

Summarizes the fiscal year 2004 work completed on PNNL's Department of Homeland Security Emergency Preparedness and Response Standards Development Project. Also, the report includes key draft standards, in various stages of development and publication, that were associated with various tasks of the fiscal year 2004 scope of the project.

78 FR 40496 - Notice of availability of the Final Environmental Impact Statement for the Proposed Hollister...

Science.gov (United States)

2013-07-05

... exploration. The proposed project would augment the existing mine water management facilities that include water treatment facilities and rapid infiltration basins by adding underground dewatering wells and by... Statement for the Proposed Hollister Underground Mine Project, Elko County, NV AGENCY: Bureau of Land...

Proposed standardized definitions for vertical resolution and uncertainty in the NDACC lidar ozone and temperature algorithms - Part 2: Ozone DIAL uncertainty budget

Science.gov (United States)

Leblanc, Thierry; Sica, Robert J.; van Gijsel, Joanna A. E.; Godin-Beekmann, Sophie; Haefele, Alexander; Trickl, Thomas; Payen, Guillaume; Liberti, Gianluigi

2016-08-01

A standardized approach for the definition, propagation, and reporting of uncertainty in the ozone differential absorption lidar data products contributing to the Network for the Detection for Atmospheric Composition Change (NDACC) database is proposed. One essential aspect of the proposed approach is the propagation in parallel of all independent uncertainty components through the data processing chain before they are combined together to form the ozone combined standard uncertainty. The independent uncertainty components contributing to the overall budget include random noise associated with signal detection, uncertainty due to saturation correction, background noise extraction, the absorption cross sections of O3, NO2, SO2, and O2, the molecular extinction cross sections, and the number densities of the air, NO2, and SO2. The expression of the individual uncertainty components and their step-by-step propagation through the ozone differential absorption lidar (DIAL) processing chain are thoroughly estimated. All sources of uncertainty except detection noise imply correlated terms in the vertical dimension, which requires knowledge of the covariance matrix when the lidar signal is vertically filtered. In addition, the covariance terms must be taken into account if the same detection hardware is shared by the lidar receiver channels at the absorbed and non-absorbed wavelengths. The ozone uncertainty budget is presented as much as possible in a generic form (i.e., as a function of instrument performance and wavelength) so that all NDACC ozone DIAL investigators across the network can estimate, for their own instrument and in a straightforward manner, the expected impact of each reviewed uncertainty component. In addition, two actual examples of full uncertainty budget are provided, using nighttime measurements from the tropospheric ozone DIAL located at the Jet Propulsion Laboratory (JPL) Table Mountain Facility, California, and nighttime measurements from the JPL

48 CFR 52.211-7 - Alternatives to Government-unique standards.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Alternatives to Government... Government-unique standards. The offeror may propose voluntary consensus standards that meet the Government's... voluntary consensus standard instead of the Government-unique standard if it meets the Government's...

Metric and topology on a non-standard real line and non-standard space-time

International Nuclear Information System (INIS)

Tahir Shah, K.

1981-04-01

We study metric and topological properties of extended real line R* and compare it with the non-standard model of real line *R. We show that some properties, like triangular inequality, cannot be carried over R* from R. This confirms F. Wattenberg's result for measure theory on Dedekind completion of *R. Based on conclusions from these results we propose a non-standard model of space-time. This space-time is without undefined objects like singularities. (author)

Negotiating behavioural change: therapists' proposal turns in Cognitive Behavioural Therapy.

Science.gov (United States)

Ekberg, Katie; Lecouteur, Amanda

2012-01-01

Cognitive behavioural therapy (CBT) is an internationally recognised method for treating depression. However, many of the techniques involved in CBT are accomplished within the therapy interaction in diverse ways, and with varying consequences for the trajectory of therapy session. This paper uses conversation analysis to examine some standard ways in which therapists propose suggestions for behavioural change to clients attending CBT sessions for depression in Australia. Therapists' proposal turns displayed their subordinate epistemic authority over the matter at hand, and emphasised a high degree of optionality on behalf of the client in accepting their suggestions. This practice was routinely accomplished via three standard proposal turns: (1) hedged recommendations; (2) interrogatives; and (3) information-giving. These proposal turns will be examined in relation to the negotiation of behavioural change, and the implications for CBT interactions between therapist and client will be discussed.

Preliminary results of standard quantitative analysis by ED-XRF

International Nuclear Information System (INIS)

Lara, Alessandro L. de; Franca, Alana C.; Neto, Manoel R.M.; Paschuk, Sergei A.

2013-01-01

A comparison between the results of elemental concentration proposed by XRS-FP software , using data obtained by EDXRF technique with those obtained by stoichiometric calculation was performed. For this purpose, five standard samples of known compounds were produced: two lead- oxide, magnesium chloride and iodine in controlled amounts. The compounds were subsequently mixed and compressed to form tablets. The samples were irradiated in three endpoints, according to an orientation. The measurements were performed at the Laboratory for Radiological UTFPR using X-123SDD the Amptek detector and X-ray tube with silver target from the same manufacturer. The operating conditions tube were 05μA current to a 40 kV voltage. Finally, the 15 spectra analyzed with the software to determine the concentration of chlorine, iodine and lead. Data from this analysis were compared with results expected in stoichiometric calculations. The data provided by the program, a convergence of results, indicating homogeneity of the samples was found. Compared to the stoichiometric calculation, a considerable discrepancy that may be the result of a misconfiguration or contamination of the sample was found. At the end, we created a proposal for continuation of the work using an auxiliary calculation should be developed in the next step

Preliminary results of standard quantitative analysis by ED-XRF

Energy Technology Data Exchange (ETDEWEB)

Lara, Alessandro L. de; Franca, Alana C.; Neto, Manoel R.M.; Paschuk, Sergei A., E-mail: alellara@hotmail.com [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil). Dept. de Fisica; Denyak, Valeriy, E-mail: denyak@gmail.com [Instituto de Pesquisa Pele Pequeno Principe (IPPP), Curitiba, PR (Brazil)

2013-07-01

A comparison between the results of elemental concentration proposed by XRS-FP software , using data obtained by EDXRF technique with those obtained by stoichiometric calculation was performed. For this purpose, five standard samples of known compounds were produced: two lead- oxide, magnesium chloride and iodine in controlled amounts. The compounds were subsequently mixed and compressed to form tablets. The samples were irradiated in three endpoints, according to an orientation. The measurements were performed at the Laboratory for Radiological UTFPR using X-123SDD the Amptek detector and X-ray tube with silver target from the same manufacturer. The operating conditions tube were 05μA current to a 40 kV voltage. Finally, the 15 spectra analyzed with the software to determine the concentration of chlorine, iodine and lead. Data from this analysis were compared with results expected in stoichiometric calculations. The data provided by the program, a convergence of results, indicating homogeneity of the samples was found. Compared to the stoichiometric calculation, a considerable discrepancy that may be the result of a misconfiguration or contamination of the sample was found. At the end, we created a proposal for continuation of the work using an auxiliary calculation should be developed in the next step.

On new proposal for holographic BCFT

Energy Technology Data Exchange (ETDEWEB)

Chu, Chong-Sun; Miao, Rong-Xin [Department of Physics, National Tsing-Hua University,Hsinchu 30013, Taiwan (China); Physics Division, National Center for Theoretical Sciences,National Tsing-Hua University, Hsinchu 30013, Taiwan (China); Guo, Wu-Zhong [Physics Division, National Center for Theoretical Sciences,National Tsing-Hua University, Hsinchu 30013, Taiwan (China)

2017-04-14

This paper is an extended version of our short letter on a new proposal for holographic boundary conformal field, i.e., BCFT. By using the Penrose-Brown-Henneaux (PBH) transformation, we successfully obtain the expected boundary Weyl anomaly. The obtained boundary central charges satisfy naturally a c-like theorem holographically. We then develop an approach of holographic renormalization for BCFT, and reproduce the correct boundary Weyl anomaly. This provides a non-trivial check of our proposal. We also investigate the holographic entanglement entropy of BCFT and find that our proposal gives the expected orthogonal condition that the minimal surface must be normal to the spacetime boundaries if they intersect. This is another support for our proposal. We also find that the entanglement entropy depends on the boundary conditions of BCFT and the distance to the boundary; and that the entanglement wedge behaves a phase transition, which is important for the self-consistency of AdS/BCFT. Finally, we show that the proposal of https://arxiv.org/abs/1105.5165 is too restrictive that it always make vanishing some of the boundary central charges.

Fault estimation - A standard problem approach

DEFF Research Database (Denmark)

Stoustrup, J.; Niemann, Hans Henrik

2002-01-01

This paper presents a range of optimization based approaches to fault diagnosis. A variety of fault diagnosis problems are reformulated in the so-called standard problem set-up introduced in the literature on robust control. Once the standard problem formulations are given, the fault diagnosis...... problems can be solved by standard optimization techniques. The proposed methods include (1) fault diagnosis (fault estimation, (FE)) for systems with model uncertainties; FE for systems with parametric faults, and FE for a class of nonlinear systems. Copyright...

Standard Master Matrix for Light-Water Reactor Pressure Vessel Surveillance Standards, E706(0)

CERN Document Server

American Society for Testing and Materials. Philadelphia

2002-01-01

1.1 This master matrix standard describes a series of standard practices, guides, and methods for the prediction of neutron-induced changes in light-water reactor (LWR) pressure vessel (PV) and support structure steels throughout a pressure vessel's service life (Fig. 1). Some of these are existing ASTM standards, some are ASTM standards that have been modified, and some are proposed ASTM standards. General requirements of content and consistency are discussed in Section 6 . More detailed writers' and users' information, justification, and specific requirements for the nine practices, ten guides, and three methods are provided in Sections 3-5. Referenced documents are discussed in Section 2. The summary-type information that is provided in Sections 3 and 4 is essential for establishing proper understanding and communications between the writers and users of this set of matrix standards. It was extracted from the referenced documents, Section 2 and references (1-106) for use by individual writers and users. 1...

Comments on the Joint Proposed Rulemaking to Establish Light-Duty Vehicle Greenhouse Gas Emission Standards and Corporate Average Fuel Economy Standards

Energy Technology Data Exchange (ETDEWEB)

Wenzel, Thomas P

2009-10-27

I appreciate the opportunity to provide comments on the joint rulemaking to establish greenhouse gas emission and fuel economy standards for light-duty vehicles. My comments are directed at the choice of vehicle footprint as the attribute by which to vary fuel economy and greenhouse gas emission standards, in the interest of protecting vehicle occupants from death or serious injury. I have made several of these points before when commenting on previous NHTSA rulemakings regarding CAFE standards and safety. The comments today are mine alone, and do not necessarily represent the views of the US Department of Energy, Lawrence Berkeley National Laboratory, or the University of California. My comments can be summarized as follows: (1) My updated analysis of casualty risk finds that, after accounting for drivers and crash location, there is a wide range in casualty risk for vehicles with the same weight or footprint. This suggests that reducing vehicle weight or footprint will not necessarily result in increased fatalities or serious injuries. (2) Indeed, the recent safety record of crossover SUVs indicates that weight reduction in this class of vehicles resulted in a reduction in fatality risks. (3) Computer crash simulations can pinpoint the effect of specific design changes on vehicle safety; these analyses are preferable to regression analyses, which rely on historical vehicle designs, and cannot fully isolate the effect of specific design changes, such as weight reduction, on crash outcomes. (4) There is evidence that automakers planned to build more large light trucks in response to the footprint-based light truck CAFE standards. Such an increase in the number of large light trucks on the road may decrease, rather than increase, overall safety.

The Standard Model

Science.gov (United States)

Burgess, Cliff; Moore, Guy

2012-04-01

List of illustrations; List of tables; Preface; Acknowledgments; Part I. Theoretical Framework: 1. Field theory review; 2. The standard model: general features; 3. Cross sections and lifetimes; Part II. Applications: Leptons: 4. Elementary boson decays; 5. Leptonic weak interactions: decays; 6. Leptonic weak interactions: collisions; 7. Effective Lagrangians; Part III. Applications: Hadrons: 8. Hadrons and QCD; 9. Hadronic interactions; Part IV. Beyond the Standard Model: 10. Neutrino masses; 11. Open questions, proposed solutions; Appendix A. Experimental values for the parameters; Appendix B. Symmetries and group theory review; Appendix C. Lorentz group and the Dirac algebra; Appendix D. ξ-gauge Feynman rules; Appendix E. Metric convention conversion table; Select bibliography; Index.

76 FR 30299 - Proposed Establishment of Class E Airspace; Kayenta, AZ

Science.gov (United States)

2011-05-25

...-0393; Airspace Docket No. 11-AWP-2] Proposed Establishment of Class E Airspace; Kayenta, AZ AGENCY... action proposes to establish Class E Airspace at Kayenta Airport, Kayenta, AZ. Controlled airspace is...) standard instrument approach procedures at Kayenta Airport. The FAA is proposing this action to enhance the...

Search for the Standard Model Higgs Boson in Leptons plus Jets Final States

Energy Technology Data Exchange (ETDEWEB)

Nguyen, Huong [Univ. of Virginia, Charlottesville, VA (United States)

2014-01-01

Searches for SM Higgs boson production in the leptons plus jets final states with a data set corresponding to 9.7 fb^-1 of $\\bar{p}$p collisions at √s = 1.96TeV collected by the DØ Experiment are presented in this thesis. The searches are carried out in two independent analyses, accounting for different signal topologies.

Practical reference - radiation standards in Canada

International Nuclear Information System (INIS)

1983-07-01

In developing a policy that will require licensees to calibrate their radiation dose measuring devices and trace such calibrations to approved reference standards, the AECB has consulted recognized experts. This document presents the experts' reports and recommendations which will be considered in finalizing the policy

Standards and producers' liability

International Nuclear Information System (INIS)

Kretschmer, F.

1979-01-01

The author discusses the liability of producers and the diligence required, which has to come up to technical standards and the latest state of technology. The consequences of this requirement with regard to claims for damages are outlined and proposals for reforms are pointed out. (HSCH) [de

78 FR 60015 - Proposed Policy Guidance on Metropolitan Planning Organization Representation

Science.gov (United States)

2013-09-30

... rulemaking, performance measures and standards to be used by States to assess the condition of the pavements... on MPO boards, this proposed guidance proposes flexible approaches for MPOs and providers of public...

Search for the Standard Model Higgs Boson in Missing Transverse Energy and $b$-quark Final States Using Proton-Antiproton Collisions at 1.96 TeV

Energy Technology Data Exchange (ETDEWEB)

Dorland, Tyler McMillan [Univ. of Washington, Seattle, WA (United States)

2011-01-01

A search for the standard model Higgs boson is performed in 6.4 fb^-1 of p$\\bar{p}$ collisions at √s = 1.96 TeV, collected with the DØ detector during Run II of the Fermilab Tevatron. The final state considered is a pair of jets originating from b quarks and missing transverse energy, as expected from p$\\bar{p}$ → ZH → v$\\bar{v}$b$\\bar{b}$ production. The search is also sensitive to the WH → ℓvb$\\bar{b}$ channel, where the charged lepton is not identified. Boosted decision trees are used to discriminate signal from background. Good agreement is observed between data and expected backgrounds, and a limit is set at 95% C.L. on the section multiplied by branching fraction of (p$\\bar{p}$ → (Z/W)H) x (H → b$\\bar{b}$). For a Higgs boson mass of 115 GeV, the observed limit is a factor of 3.5 larger than the value expected from the standard model.

Final Rule for Control of Air Pollution from Aircraft and Aircraft Engines: Emission Standards and Test Procedures