Proposed English Standards Promote Aviation Safety.

Science.gov (United States)

Chatham, Robert L.; Thomas, Shelley

2000-01-01

Discusses the International Civil Aviation Organization's (ICAO) Air Navigation's Commission approval of a task to develop minimum skill level requirements in English for air traffic control. The ICAO collaborated with the Defense Language Institute English Language Center to propose a minimum standard for English proficiency for international…

Development of the private practice management standards for psychology.

Science.gov (United States)

Mathews, Rebecca; Stokes, David; Littlefield, Lyn; Collins, Leah

2011-01-01

This paper describes the process of developing a set of private practice management standards to support Australian psychologists and promote high quality services to the public. A review of the literature was conducted to identify management standards relevant to psychology, which were further developed in consultation with a panel of experts in psychology or in the development of standards. Forty-three psychologists in independent private practice took part in either a survey (n=22) to provide feedback on the relevance of, and their compliance with, the identified standards, or a 6-month pilot study (n=21) in which a web-based self-assessment instrument evaluating the final set of standards and performance indicators was implemented in their practice to investigate self-reported change in management procedures. The pilot study demonstrated good outcomes for practitioners when evaluation of compliance to the standards was operationalized in a self-assessment format. Study results are based on a small sample size. Nevertheless, relevance and utility of the standards was found providing an initial version of management standards that have relevance to the practice of psychology in Australia, along with a system for evaluating psychological service provision to ensure best practice in service delivery. © 2010 National Association for Healthcare Quality.

Practices around Customization of Standard Systems

DEFF Research Database (Denmark)

Dittrich, Yvonne; Vaucouleur, Sebastien

2008-01-01

More and more software systems are developed by customizing a standard product that provide the major part of the functionality. The customization of Enterprise Resource Planning systems is such a product based software development practice. Little empirical research on the specificities...... of these software development practices is available. We present an empirical study on customization practices based on video recordings, interviews and a survey. The observed and reported practices challenge some of the principles of software engineering. Based on the analysis, we discuss the specificity...

40 CFR 60.103a - Work practice standards.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Work practice standards. 60.103a... Refineries for Which Construction, Reconstruction, or Modification Commenced After May 14, 2007 § 60.103a Work practice standards. (a) Each owner or operator that operates a flare that is subject to this...

7 CFR 205.271 - Facility pest management practice standard.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Facility pest management practice standard. 205.271... Requirements § 205.271 Facility pest management practice standard. (a) The producer or handler of an organic facility must use management practices to prevent pests, including but not limited to: (1) Removal of pest...

Standardizing the practice of human reliability analysis

International Nuclear Information System (INIS)

Hallbert, B.P.

1993-01-01

The practice of human reliability analysis (HRA) within the nuclear industry varies greatly in terms of posited mechanisms that shape human performance, methods of characterizing and analytically modeling human behavior, and the techniques that are employed to estimate the frequency with which human error occurs. This variation has been a source of contention among HRA practitioners regarding the validity of results obtained from different HRA methods. It has also resulted in attempts to develop standard methods and procedures for conducting HRAs. For many of the same reasons, the practice of HRA has not been standardized or has been standardized only to the extent that individual analysts have developed heuristics and consistent approaches in their practice of HRA. From the standpoint of consumers and regulators, this has resulted in a lack of clear acceptance criteria for the assumptions, modeling, and quantification of human errors in probabilistic risk assessments

Regulatory practices and safety standards for nuclear power plants

International Nuclear Information System (INIS)

1989-01-01

The International Symposium on Regulatory Practices and Safety Standards for Nuclear Power Plants was jointly organized by the International Atomic Energy Agency (IAEA), for Nuclear Energy Agency of the OECD and the Government of the Federal Republic of Germany with the objective of providing an international forum for the exchange of information on regulatory practices and safety standards for nuclear power plants. The Symposium was held in Munich, Federal Republic of Germany, from 7 to 10 November 1988. It was attended by 201 experts from some 32 Member States and 4 international organizations. Fifty-one papers from 19 Member States and 2 international organizations were presented and discussed in 5 technical sessions covering the following subjects: National Regulatory Practices and Safety Standards (14 papers); Implementation of Regulatory Practices - Technical Issues (8 papers); Implementation of Regulatory Practices - Operational Aspects (8 papers); Developments and Trends in Safety Standards and Practices (11 papers); International Aspects (10 papers). A separate abstract was prepared for each of these papers. Refs, figs and tabs

Good Practice Standards – a Regulation Tool

DEFF Research Database (Denmark)

Sørensen, Marie Jull

2013-01-01

The purpose of this article is to identify the considerations weighed in regulation with good practice standards. In this article, potential due process problems with regulation via legal standards are identified and compared to other considerations, which this regulation technique meets....

Towards the proposal of an environmental quality standard for uranium in fresh water

International Nuclear Information System (INIS)

Beaugelin-Seiller, K.; Garnier-Laplace, J.; Gilbin, R.

2009-01-01

This report presents elements gathered by the IRSN to contribute to the determination of the standard of environmental quality related to uranium. After a presentation of values published by different bodies for the protection of the aquatic environment (water quality criteria), this report describes the determination of the fresh water chronic PNEC (Predicted No Effect Concentration) of uranium: method, available chronic eco-toxicity data and selection principles, PNEC obtained by applying safety factors or by statistical approach, PNEC per bio-availability domain, practical elements for a correct use of a PNEC. It finally proposes a PNEC for fresh water

Standard Practice for Visual Inspections of Photovoltaic Modules

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 This practice covers procedures and criteria for visual inspections of photovoltaic modules. 1.2 Visual inspections of photovoltaic modules are normally performed before and after modules have been subjected to environmental, electrical, or mechanical stress testing, such as thermal cycling, humidity-freeze cycling, damp heat exposure, ultraviolet exposure, mechanical loading, hail impact testing, outdoor exposure, or other stress testing that may be part of photovoltaic module testing sequence. 1.3 This practice does not establish pass or fail levels. The determination of acceptable or unacceptable results is beyond the scope of this practice. 1.4 There is no similar or equivalent ISO standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Towards reporting standards for neuropsychological study results: A proposal to minimize communication errors with standardized qualitative descriptors for normalized test scores.

Science.gov (United States)

Schoenberg, Mike R; Rum, Ruba S

2017-11-01

Rapid, clear and efficient communication of neuropsychological results is essential to benefit patient care. Errors in communication are a lead cause of medical errors; nevertheless, there remains a lack of consistency in how neuropsychological scores are communicated. A major limitation in the communication of neuropsychological results is the inconsistent use of qualitative descriptors for standardized test scores and the use of vague terminology. PubMed search from 1 Jan 2007 to 1 Aug 2016 to identify guidelines or consensus statements for the description and reporting of qualitative terms to communicate neuropsychological test scores was conducted. The review found the use of confusing and overlapping terms to describe various ranges of percentile standardized test scores. In response, we propose a simplified set of qualitative descriptors for normalized test scores (Q-Simple) as a means to reduce errors in communicating test results. The Q-Simple qualitative terms are: 'very superior', 'superior', 'high average', 'average', 'low average', 'borderline' and 'abnormal/impaired'. A case example illustrates the proposed Q-Simple qualitative classification system to communicate neuropsychological results for neurosurgical planning. The Q-Simple qualitative descriptor system is aimed as a means to improve and standardize communication of standardized neuropsychological test scores. Research are needed to further evaluate neuropsychological communication errors. Conveying the clinical implications of neuropsychological results in a manner that minimizes risk for communication errors is a quintessential component of evidence-based practice. Copyright © 2017 Elsevier B.V. All rights reserved.

Ethical and professional standards compliance among practicing ...

African Journals Online (AJOL)

This study investigated ethical and professional standards compliance among practicing librariansin university libraries in Benue State. The purpose of the study was todetermine the extent to which librarians in university libraries comply with ethics and professional standards in librarianship. The study adopted a descriptive ...

Standard Practice for Quality Management Systems for Nondestructive Testing Agencies

CERN Document Server

American Society for Testing and Materials. Philadelphia

2009-01-01

1.1 This practice covers general requirements for the establishment and maintenance of a quality management system for agencies engaged in nondestructive testing (NDT). 1.2 This practice utilizes criteria contained in Practice E 543. 1.3 This practice utilizes criteria contained in American National Standard ANSI/ISO/ASQ Q9001–2000, Quality management systems—Requirements. 1.4 This practice recognizes the importance of establishing minimum safety criteria. 1.5 The use of SI or inch-pound units, or combinations thereof, will be the responsibility of the technical committee whose standards are referred to in this standard. 1.6 This practice does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this practice to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

INACSL Standards of Best Practice for Simulation: Past, Present, and Future.

Science.gov (United States)

Sittner, Barbara J; Aebersold, Michelle L; Paige, Jane B; Graham, Leslie L M; Schram, Andrea Parsons; Decker, Sharon I; Lioce, Lori

2015-01-01

To describe the historical evolution of the International Nursing Association for Clinical Simulation and Learning's (INACSL) Standards of Best Practice: Simulation. The establishment of simulation standards began as a concerted effort by the INACSL Board of Directors in 2010 to provide best practices to design, conduct, and evaluate simulation activities in order to advance the science of simulation as a teaching methodology. A comprehensive review of the evolution of INACSL Standards of Best Practice: Simulation was conducted using journal publications, the INACSL website, INACSL member survey, and reports from members of the INACSL Standards Committee. The initial seven standards, published in 2011, were reviewed and revised in 2013. Two new standards were published in 2015. The standards will continue to evolve as the science of simulation advances. As the use of simulation-based experiences increases, the INACSL Standards of Best Practice: Simulation are foundational to standardizing language, behaviors, and curricular design for facilitators and learners.

7 CFR 28.123 - Costs of practical forms of cotton standards.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Costs of practical forms of cotton standards. 28.123 Section 28.123 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD...

48 CFR 52.230-7 - Proposal Disclosure-Cost Accounting Practice Changes.

Science.gov (United States)

2010-10-01

... Provisions and Clauses 52.230-7 Proposal Disclosure—Cost Accounting Practice Changes. As prescribed in 30.201-3(c), insert the following provision: Proposal Disclosure—Cost Accounting Practice Changes (APR 2005... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Proposal Disclosure-Cost...

Standard practice for determining rail-to-Earth resistance

CERN Document Server

American Society for Testing and Materials. Philadelphia

1999-01-01

1.1 This practice covers the procedures necessary to follow for measuring resistance-to-earth of the running rails which are used as the conductors for returning the train operating current to the substation in electric mass transit systems. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Development of standard practice guidelines for open and closed system suctioning.

Science.gov (United States)

Özden, Dilek; Görgülü, R Selma

2012-05-01

This study was carried out to determine the knowledge and practice of nurses before and after training and the development of standard practice guidelines for open and closed system suctioning methods in patients with endotracheal tubes. Many life-threatening complications can occur when a suctioning procedure is not performed with the correct technique. It has been reported that standard practice guidelines for suctioning are insufficient in clinical practice. Non-participant structured observational study. We assessed a total of 48 nurses who were employed in the cardiovascular surgery intensive care unit of a state hospital in Turkey. We used a questionnaire and nurse observation forms to assess the use of the open and closed system suctioning. There was a significant difference between the mean scores of the answers ('true', 'wrong' and 'I do not know') for the use of open and closed system suctioning before and after training. In addition, all steps of both suctioning procedures were carried out correctly during the third observation. The compliance of the nurses to the standard practice guidelines for open and closed suctioning and their knowledge levels on the subject were increased after training, while the implementation of standards was satisfactory. The development of open and closed system suctioning standard practice guidelines directly contributed to the enhancement of patient safety and the quality of nursing care. It is suggested that, as in other nursing care practices, suctioning should be carried out in accordance with standard practice guidelines, and health institutions should develop their standard practice guidelines and work in accordance with them. © 2012 Blackwell Publishing Ltd.

Practical application of standards in special libraries

Directory of Open Access Journals (Sweden)

Nada Češnovar

1998-01-01

Full Text Available Special libraries in Slovenia represent an important part of information infrastructure.They operate in the spheres of economy, culture, politics, health, and others.Although they perform an important role in the process of professional training of the employees they are too often set aside.Our government is undoubtedly aware of the deficiency of normative regulation in these areas; however, passing of certain acts is often delayed because there is no direct damage to the state itself if they are not passed. New standards for special libraries regulating their operation have been prepared. Their practical application will be tested in practice. Several years of experience as a counsellor to special libraries enable the author an insight into the use of standards. Standards are certainly an indispensable "reading" for special libraries although they are certainly not perfect.

Standard practice for modified salt spray (fog) testing

CERN Document Server

American Society for Testing and Materials. Philadelphia

2009-01-01

1.1 This practice covers and sets forth conditions for five modifications in salt spray (fog) testing for specification purposes. These are in chronological order of their development: 1.1.1 Annex A1, acetic acid-salt spray test, continuous. 1.1.2 Annex A2, cyclic acidified salt spray test. 1.1.3 Annex A3, seawater acidified test, cyclic (SWAAT). 1.1.4 Annex A4, SO2 salt spray test, cyclic. 1.1.5 Annex A5, dilute electrolyte cyclic fog dry test. 1.2 This practice does not prescribe the type of modification, test specimen or exposure periods to be used for a specific product, nor the interpretation to be given to the results. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicabilit...

Methodological aspects of clinical trials in tinnitus: A proposal for an international standard

Science.gov (United States)

Landgrebe, Michael; Azevedo, Andréia; Baguley, David; Bauer, Carol; Cacace, Anthony; Coelho, Claudia; Dornhoffer, John; Figueiredo, Ricardo; Flor, Herta; Hajak, Goeran; van de Heyning, Paul; Hiller, Wolfgang; Khedr, Eman; Kleinjung, Tobias; Koller, Michael; Lainez, Jose Miguel; Londero, Alain; Martin, William H.; Mennemeier, Mark; Piccirillo, Jay; De Ridder, Dirk; Rupprecht, Rainer; Searchfield, Grant; Vanneste, Sven; Zeman, Florian; Langguth, Berthold

2013-01-01

Chronic tinnitus is a common condition with a high burden of disease. While many different treatments are used in clinical practice, the evidence for the efficacy of these treatments is low and the variance of treatment response between individuals is high. This is most likely due to the great heterogeneity of tinnitus with respect to clinical features as well as underlying pathophysiological mechanisms. There is a clear need to find effective treatment options in tinnitus, however, clinical trials differ substantially with respect to methodological quality and design. Consequently, the conclusions that can be derived from these studies are limited and jeopardize comparison between studies. Here, we discuss our view of the most important aspects of trial design in clinical studies in tinnitus and make suggestions for an international methodological standard in tinnitus trials. We hope that the proposed methodological standard will stimulate scientific discussion and will help to improve the quality of trials in tinnitus. PMID:22789414

Quality management of clinical-practical instruction for Practical Year medical students in Germany - proposal for a catalogue of criteria from the German Society of Medical Education.

Science.gov (United States)

Raes, Patricia; Angstwurm, Matthias; Berberat, Pascal; Kadmon, Martina; Rotgans, Jerome; Streitlein-Böhme, Irmgard; Burckhardt, Gerhard; Fischer, Martin R

2014-01-01

Amended in 2013, the current version of the German Medical Licensure Regulation contains structural specifications that are also required of non-university institutions involved in Practical Year clinical training. The criteria are worded in relatively general terms. Furthermore, not all of the structural specifications can be readily applied to every subject area. In order to ensure commensurability in Practical Year instruction in Germany, not least in light of recently introduced Practical Year mobility, it is necessary to define consistent quality criteria for Practical Year training. The authors therefore propose a catalogue of criteria for the quality management process in Practical Year instruction facilities. In January 2014, the board of directors of the German Society for Medical Education decided to establish a committee comprised of representatives from various German medical faculties. In a process similar to the Delphi methodology, the group developed criteria for structure, process and outcome quality in Practical Year training in Germany. The criteria developed for structure, process and outcome quality apply to Practical Year training in academic teaching hospitals and university medical centres. Furthermore, modalities for review are proposed. The present catalogue of criteria is intended to contribute to the formation of a basis for the most consistent quality standards possible for Practical Year instruction in Germany.

Standard practice for ultrasonic testing of wrought products

CERN Document Server

American Society for Testing and Materials. Philadelphia

2013-01-01

1.1 Purpose—This practice establishes the minimum requirements for ultrasonic examination of wrought products. Note 1—This standard was adopted to replace MIL-STD-2154, 30 Sept. 1982. This standard is intended to be used for the same applications as the document which it replaced. Users should carefully review its requirements when considering its use for new, or different applications, or both. 1.2 Application—This practice is applicable for examination of materials such as, wrought metals and wrought metal products. 1.2.1 Wrought Aluminum Alloy Products—Examination shall be in accordance with Practice B 594. 1.3 Acceptance Class—When examination is performed in accordance with this practice, engineering drawings, specifications, or other applicable documents shall indicate the acceptance criteria. Five ultrasonic acceptance classes are defined in Table 1. One or more of these classes may be used to establish the acceptance criteria or additional or alternate criteria may be specified. 1.4 Ord...

Practical Realism: Against Standard Scientific Realism and Anti-Realism

Directory of Open Access Journals (Sweden)

Rein Vihalemm

2012-12-01

Full Text Available In this paper, the elaboration of the concept of practical realist philosophy of science which began in the author's previous papers is continued. It is argued that practical realism is opposed to standard scientific realism, on the one hand, and antirealism, on the other. Standard scientific realism is challengeable due to its abstract character, as being isolated from practice. It is based on a metaphysical-ontological presupposition which raises the problem of the God's Eye point of view (as it was called by Hilary Putnam. Joseph Rouse's conception of science as practice, Sami Pihlström's pragmatic realism, and even Ilkka Niiniluoto's critical scientific realism are interpreted as practical realist conceptions. Pihlström suggests that the contemporary scientific realist should be prepared to accept the pragmatically naturalized Kantian transcendental perspective on realism. It is argued, however, that this realistically naturalized Kantianism can be nothing more than practical realism, as originated by Karl Marx.

Standard practice for conducting and evaluating laboratory corrosions tests in soils

CERN Document Server

American Society for Testing and Materials. Philadelphia

1999-01-01

1.1 This practice covers procedures for conducting laboratory corrosion tests in soils to evaluate the corrosive attack on engineering materials. 1.2 This practice covers specimen selection and preparation, test environments, and evaluation of test results. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

The Development Standard Agreement Influences on National and International Business Practices

Directory of Open Access Journals (Sweden)

Cindawati Cindawati

2016-12-01

Full Text Available The rapidly growing business traffic either nationally or internationally forces the business practices to establish a standard agreement to secure the products and to protect the buyer from any risks. The standard agreement successfully meets the demand of international trade which urgently need the high speed and the accuracy. The objective of this research is to find out how does the development of agreement affect to the commerce practices and what are the requirements of standard agreement in accordance with the right and obligation. A qualitative method is applied in searching data of business practices. This study uses a normative research which guides the rule of law or determines some business standards and norms. The finding of this study show that the development of agreement strongly affects to the commerce practices, and standar agreement is urgently needed by business practices as a guideline to perform business traffic as smooth as buyer and seller expect, then both seller and buyer should know the three alternative way used as the procedures of standard agreement, namely; contract signing, notification document agreement, and notification by bulletin board. At last, a standard agreement could be accepted as legal agreement corresponding to willingness and trustworthy.

Private Pilot Practical Test Standards for Airplane (SEL, MEL, SES, MES)

Science.gov (United States)

1995-05-01

The Private Pilot - Airplane Practical Test Standards book has been : published by the Federal Aviation Administration (FAA) to establish the : standards for the private pilot certification practical tests for the airplane : category and the single-e...

The common core mathematics standards transforming practice through team leadership

CERN Document Server

Hull, Ted H; Balka, Don S

2012-01-01

Transform math instruction with effective CCSS leadership The Common Core State Standards for mathematics describe the "habits of mind" that teachers should develop in their students without which the content standards cannot be successfully implemented. This professional development resource helps principals and math leaders grapple with the changes that must be addressed so that teachers can implement the practices required by the CCSS. Included are: A clear explanation of the CCSS for Mathematical Practice  Techniques to help leadership teams collaboratively implement and maintain the new standards A proficiency matrix with examples of instructional strategies for helping students reach competency in each standard.

A proposed standard round compact specimen for plane strain fracture toughness testing

Science.gov (United States)

Underwood, J. H.; Newman, J. C., Jr.; Seeley, R. R.

1980-01-01

A round, disk-shaped specimen is proposed as a standard test specimen for addition to ASTM Test for Plane-Strain Fracture Toughness of Metallic Materials (E 399-78A). The specimen is diametrically cracked, and loaded in the same way as the existing standard compact specimen. Tests and analyses were performed to verify that the proposed round compact specimen and associated stress intensity factor K solution are appropriate for a standard plane strain fracture toughness test. The use of the round compact specimen for other fracture tests is described.

78 FR 38735 - Autopsy Performance Criteria: Standards, Guidelines and Best Practices

Science.gov (United States)

2013-06-27

... DEPARTMENT OF JUSTICE Office of Justice Programs [OJP (NIJ) Docket No. 1626] Autopsy Performance Criteria: Standards, Guidelines and Best Practices AGENCY: National Institute of Justice, DOJ. ACTION... entitled, ``Autopsy Performance Criteria: Standards, Guidelines and Best Practices''. The opportunity to...

The proposed combustion standards and DOE thermal treatment systems

International Nuclear Information System (INIS)

McFee, J.; Hinman, M.B.; Eaton, D.; NcNeel, K.

1997-01-01

Under the provisions of the Clean Air Act (CAA) concerning emission of hazardous air pollutants (HAPs), the Environmental Protection Agency (EPA) published the proposed Revised Standards for Hazardous Waste Combustors on April 19, 1996 (EPA, 1996). These standards would apply to the existing Department of Energy (DOE) radioactive and mixed waste incinerators, and may be applied to several developing alternatives to incineration. The DOE has reviewed the basis for these regulations and prepared extensive comments to present concerns about the bases and implications of the standards. DOE is now discussing compliance options with the EPA for regulation of radioactive and mixed waste thermal treatment systems

A System Approach to Advanced Practice Clinician Standardization and High Reliability.

Science.gov (United States)

Okuno-Jones, Susan; Siehoff, Alice; Law, Jennifer; Juarez, Patricia

Advanced practice clinicians (APCs) are an integral part of the health care team. Opportunities exist within Advocate Health Care to standardize and optimize APC practice across the system. To enhance the role and talents of APCs, an approach to role definition and optimization of practice and a structured approach to orientation and evaluation are shared. Although in the early stages of development, definition and standardization of accountabilities in a framework to support system changes are transforming the practice of APCs.

75 FR 60352 - Notice of Proposed Rulemaking: Mortgage Acts and Practices - Advertising Rule

Science.gov (United States)

2010-09-30

... Acts and Practices - Advertising Rule AGENCY: Federal Trade Commission (FTC or Commission). ACTION...) relating to unfair or deceptive acts and practices that may occur with regard to mortgage advertising, the Mortgage Acts and Practices (MAP) - Advertising Rule (proposed rule). The proposed rule published for...

Oswer integrated health and safety standard operating practices. Directive

International Nuclear Information System (INIS)

1993-02-01

The directive implements the OSWER (Office of Solid Waste and Emergency Response) Integrated Health and Safety Standards Operating Practices in conjunction with the OSHA (Occupational Safety and Health Act) Worker Protection Standards, replacing the OSWER Integrated Health and Safety Policy

40 CFR 63.10390 - What management practice standard must I meet?

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 14 2010-07-01 2010-07-01 false What management practice standard must I meet? 63.10390 Section 63.10390 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY....10390 What management practice standard must I meet? You must sterilize full loads of items having a...

40 CFR 63.11561 - What are my standards and management practices?

Science.gov (United States)

2010-07-01

... standards and management practices? (a) For asphalt processing operations, you must meet the emission limits... 40 Protection of Environment 14 2010-07-01 2010-07-01 false What are my standards and management practices? 63.11561 Section 63.11561 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...

nanoSTAIR: a new strategic proposal to impulse standardization in nanotechnology research

Science.gov (United States)

López de Ipiña, J. M.; Salvi, O.; Hazebrouck, B.; Jovanovic, A.; Carre, F.; Saamanen, A.; Brouwer, D.; Schmitt, M.; Martin, S.

2015-05-01

Nanotechnology is considered one of the key technologies of the 21st century within Europe and a Key-Enabling Technology (KET) by Horizon 2020. Standardization has been identified in H2020 as one of the innovation-support measures by bridging the gap between research and the market, and helping the fast and easy transfer of research results to the European and international market. The development of new and improved standards requires high quality technical information, creating a fundamental interdependency between the standardization and research communities. In the frame of project nanoSTAIR (GA 319092), the present paper describes the European scenario on research and standardization in nanotechnology and presents a proposal of a European strategy (nanoSTAIR) to impulse direct “pipelines” between research and standardization. In addition, strategic actions focused on integration of standardization in the R&D projects, from the early stages of the design of a future business (Project Proposal), are also described.

nanoSTAIR: a new strategic proposal to impulse standardization in nanotechnology research

International Nuclear Information System (INIS)

De Ipiña, J M López; Salvi, O; Hazebrouck, B; Jovanovic, A; Carre, F; Saamanen, A; Brouwer, D; Schmitt, M; Martin, S

2015-01-01

Nanotechnology is considered one of the key technologies of the 21 st century within Europe and a Key-Enabling Technology (KET) by Horizon 2020. Standardization has been identified in H2020 as one of the innovation-support measures by bridging the gap between research and the market, and helping the fast and easy transfer of research results to the European and international market. The development of new and improved standards requires high quality technical information, creating a fundamental interdependency between the standardization and research communities. In the frame of project nanoSTAIR (GA 319092), the present paper describes the European scenario on research and standardization in nanotechnology and presents a proposal of a European strategy (nanoSTAIR) to impulse direct “pipelines” between research and standardization. In addition, strategic actions focused on integration of standardization in the R and D projects, from the early stages of the design of a future business (Project Proposal), are also described. (paper)

Practical silicon Light emitting devices fabricated by standard IC technology

International Nuclear Information System (INIS)

Aharoni, H.; Monuko du Plessis; Snyman, L.W.

2004-01-01

Full Text:Research activities are described with regard to the development of a comprehensive approach for the practical realization of single crystal Silicon Light Emitting Devices (Si-LEDs). Several interesting suggestions for the fabrication of such devices were made in the literature but they were not adopted by the semiconductor industry because they involve non-standard fabrication schemes, requiring special production lines. Our work presents an alternative approach, proposed and realized in practice by us, permitting the fabrication of Si-LEDs using the standard conventional fully industrialized IC technology ''as is'' without any adaptation. It enables their fabrication in the same production lines of the presently existing IC industry. This means that Si-LEDs can now be fabricated simultaneously with other components, such as transistors, on the same silicon chip, using the same masks and processing procedures. The result is that the yield, reliability, and price of the above Si-LEDs are the same as the other Si devices integrated on the same chip. In this work some structural details of several practical Si-LED's designed by us, as well as experimental results describing their performance are presented. These Si-LED's were fabricated to our specifications utilizing standard CMOS/BiCMOS technology, a fact which comprises an achievement by itself. The structure of the Si-LED's, is designed according to specifications such as the required operating voltage, overall light output intensity, its dependence(linear, or non-linear) on the input signal (voltage or current), light generations location (bulk, or near-surface), the emission pattern and uniformity. Such structural design present a problem since the designer can not use any structural parameters (such as doping levels and junction depths for example) but only those which already exist in the production lines. Since the fabrication procedures in these lines are originally designed for processing of

78 FR 58500 - Water Quality Standards Regulatory Clarifications Proposed Rule; Public Meeting and Public Webinars

Science.gov (United States)

2013-09-24

... the proposed rule ``Water Quality Standards Regulatory Clarifications,'' which was published... the federal water quality standards (WQS) regulation at 40 CFR Part 131 which helps implement the..., the proposed rule will lead to improved water quality standard development, implementation and...

24 CFR 1720.135 - Standards of practice.

Science.gov (United States)

2010-04-01

... URBAN DEVELOPMENT (INTERSTATE LAND SALES REGISTRATION PROGRAM) FORMAL PROCEDURES AND RULES OF PRACTICE... the standards of professional and ethical conduct required by practitioners in the courts of the... improper professional conduct. (c) Contemptuous conduct at any hearing shall be grounds for summary...

Standard practice for conducting moist SO2 tests

CERN Document Server

American Society for Testing and Materials. Philadelphia

2002-01-01

1.1 This practice covers the apparatus and procedure to be used in conducting qualitative assessment tests in accordance with the requirements of material or product specifications by means of specimen exposure to condensed moisture containing sulfur dioxide. 1.2 The exposure conditions may be varied to suit particular requirements and this practice includes provisions for use of different concentrations of sulfur dioxide and for tests either running continuously or in cycles of alternate exposure to the sulfur dioxide containing atmosphere and to the ambient atmosphere. 1.3 The variant of the test to be used, the exposure period required, the type of test specimen, and the criteria of failure are not prescribed by this practice. Such details are provided in appropriate material and product purchase specifications. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety c...

Beyond competencies: using a capability framework in developing practice standards for advanced practice nursing.

Science.gov (United States)

O'Connell, Jane; Gardner, Glenn; Coyer, Fiona

2014-12-01

This paper presents a discussion on the application of a capability framework for advanced practice nursing standards/competencies. There is acceptance that competencies are useful and necessary for definition and education of practice-based professions. Competencies have been described as appropriate for practice in stable environments with familiar problems. Increasingly competencies are being designed for use in the health sector for advanced practice such as the nurse practitioner role. Nurse practitioners work in environments and roles that are dynamic and unpredictable necessitating attributes and skills to practice at advanced and extended levels in both familiar and unfamiliar clinical situations. Capability has been described as the combination of skills, knowledge, values and self-esteem which enables individuals to manage change, be flexible and move beyond competency. A discussion paper exploring 'capability' as a framework for advanced nursing practice standards. Data were sourced from electronic databases as described in the background section. As advanced practice nursing becomes more established and formalized, novel ways of teaching and assessing the practice of experienced clinicians beyond competency are imperative for the changing context of health services. Leading researchers into capability in health care state that traditional education and training in health disciplines concentrates mainly on developing competence. To ensure that healthcare delivery keeps pace with increasing demand and a continuously changing context there is a need to embrace capability as a framework for advanced practice and education. © 2014 John Wiley & Sons Ltd.

Comparative Analysis of Three Proposed Federal Renewable Electricity Standards

Energy Technology Data Exchange (ETDEWEB)

Sullivan, P.; Logan, J.; Bird, L.; Short, W.

2009-05-01

This paper analyzes potential impacts of proposed national renewable electricity standard (RES) legislation. An RES is a mandate requiring certain electricity retailers to provide a minimum share of their electricity sales from qualifying renewable power generation. The analysis focuses on draft bills introduced individually by Senator Jeff Bingaman and Representative Edward Markey, and jointly by Representative Henry Waxman and Markey. The analysis uses NREL's Regional Energy Deployment System (ReEDS) model to evaluate the impacts of the proposed RES requirements on the U.S. energy sector in four scenarios.

Recommendations for a proposed standard for performing systems analysis

International Nuclear Information System (INIS)

LaChance, J.; Whitehead, D.; Drouin, M.

1998-01-01

In August 1995, the Nuclear Regulatory Commission (NRC) issued a policy statement proposing improved regulatory decisionmaking by increasing the use of PRA [probabilistic risk assessment] in all regulatory matters to the extent supported by the state-of-the-art in PRA methods and data. A key aspect in using PRA in risk-informed regulatory activities is establishing the appropriate scope and attributes of the PRA. In this regard, ASME decided to develop a consensus PRA Standard. The objective is to develop a PRA Standard such that the technical quality of nuclear plant PRAs will be sufficient to support risk-informed regulatory applications. This paper presents examples recommendations for the systems analysis element of a PRA for incorporation into the ASME PRA Standard

A proposal for a code of ethics for nurse practitioners.

Science.gov (United States)

Peterson, Moya; Potter, Robert Lyman

2004-03-01

To review established codes for health care professionals and standards of practice for the nurse practitioner (NP) and to utilize these codes and standards, general ethical themes, and a new ethical triangle to propose an ethical code for NPs. Reviews of three generally accepted ethical themes (deontological, teleological, and areteological), the ethical triangle by Potter, the American Academy of Nurse Practitioners (AANP) standards of practice for NPs, and codes of ethics from the American Nurses Association (ANA) and the American Medical Association (AMA). A proposal for a code of ethics for NPs is presented. This code was determined by basic ethical themes and established codes for nursing, formulated by the ANA, and for physicians, formulated by the AMA. The proposal was also developed in consideration of the AANP standards of practice for NPs. The role of the NP is unique in its ethical demands. The authors believe that the expanded practice of NPs presents ethical concerns that are not addressed by the ANA code and yet are relevant to nursing and therefore different than the ethical concerns of physicians. This proposal attempts to broaden NPs' perspective of the role that ethics should hold in their professional lives.

Standard practice for conducting atmospheric corrosion tests on metals

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This practice covers and defines conditions for exposure of metals and alloys to the weather. It sets forth the general procedures that should be followed in any atmospheric test. It is presented as an aid in conducting atmospheric corrosion tests so that some of the pitfalls of such testing may be avoided. As such, it is concerned mainly with panel exposures to obtain data for comparison purposes. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Proposal of a micromagnetic standard problem for ferromagnetic resonance simulations

Energy Technology Data Exchange (ETDEWEB)

Baker, Alexander [Department of Physics, Clarendon Laboratory, University of Oxford, Oxford, 3PU, OX1 (United Kingdom); Beg, Marijan; Ashton, Gregory; Albert, Maximilian; Chernyshenko, Dmitri [Faculty of Engineering and the Environment, University of Southampton, SO17 1BJ, Southampton (United Kingdom); Wang, Weiwei [Department of Physics, Ningbo University, Ningbo, 315211 China (China); Zhang, Shilei [Department of Physics, Clarendon Laboratory, University of Oxford, Oxford, 3PU, OX1 (United Kingdom); Bisotti, Marc-Antonio; Franchin, Matteo [Faculty of Engineering and the Environment, University of Southampton, SO17 1BJ, Southampton (United Kingdom); Hu, Chun Lian; Stamps, Robert [SUPA School of Physics and Astronomy, University of Glasgow, G12, Glasgow, 8QQ United Kingdom (United Kingdom); Hesjedal, Thorsten, E-mail: t.hesjedal1@physics.ox.ac.uk [Department of Physics, Clarendon Laboratory, University of Oxford, Oxford, 3PU, OX1 (United Kingdom); Fangohr, Hans [Faculty of Engineering and the Environment, University of Southampton, SO17 1BJ, Southampton (United Kingdom)

2017-01-01

Nowadays, micromagnetic simulations are a common tool for studying a wide range of different magnetic phenomena, including the ferromagnetic resonance. A technique for evaluating reliability and validity of different micromagnetic simulation tools is the simulation of proposed standard problems. We propose a new standard problem by providing a detailed specification and analysis of a sufficiently simple problem. By analyzing the magnetization dynamics in a thin permalloy square sample, triggered by a well defined excitation, we obtain the ferromagnetic resonance spectrum and identify the resonance modes via Fourier transform. Simulations are performed using both finite difference and finite element numerical methods, with OOMMF and Nmag simulators, respectively. We report the effects of initial conditions and simulation parameters on the character of the observed resonance modes for this standard problem. We provide detailed instructions and code to assist in using the results for evaluation of new simulator tools, and to help with numerical calculation of ferromagnetic resonance spectra and modes in general. - Highlights: ●Micromagnetic standard problem for FerroMagnetic Resonance (FMR). ●Overview of FMR simulation techniques. ●Define reproducible test problem with ring down method. ●Example configuration files, scripts and post processing for OOMMF and NMag. ●Code and data available in Ref. [23].

40 CFR 63.11550 - What are my standards and management practices?

Science.gov (United States)

2010-07-01

... my standards and management practices? (a) If you own or operate new or existing affected sources at... practices plan. The management practices plan must include the required management practices in paragraphs (a)(1) and (2) of this section and may include any other management practices that are implemented at...

Air kerma standardization for diagnostic radiology, and requirements proposal for calibration laboratories

International Nuclear Information System (INIS)

Ramos, Manoel Mattos Oliveira

2009-01-01

The demand for calibration services and quality control in diagnostic radiology has grown in the country since the publication of the governmental regulation 453, issued by the Ministry of Health in 1998. At that time, to produce results facing the new legislation, many laboratories used different standards and radiation qualities, some of which could be inadequate. The international standards neither supplied consistent radiation qualities and standardization for the different types of equipment available. This situation changed with the publication of the new edition of the IEC 61267 standard, published in 2005. A metrology network was created, but it is not yet accredited by the accreditation organism of the country, INMETRO. The objective of this work was to implement the standardization of the air kerma for the un attenuated qualities (RQR) of IEC 61267, and to develop a requirement proposal for instruments calibration laboratories. Results of interlaboratory comparisons demonstrate that the quantity is standardized and internationally traceable. A laboratory requirement proposal was finalized and it shall be submitted to INMETRO to be used as auxiliary normative document in laboratory accreditation. (author)

40 CFR 63.10895 - What are my standards and management practices?

Science.gov (United States)

2010-07-01

... Foundries § 63.10895 What are my standards and management practices? (a) If you own or operate an affected... management practices in §§ 63.10885 and 63.10886, the requirements in paragraphs (b) through (e) of this... 40 Protection of Environment 14 2010-07-01 2010-07-01 false What are my standards and management...

A proposal for standardizing computed tomography reports on abdominal aortic aneurysms

International Nuclear Information System (INIS)

Torlai, Fabiola Goda; Meirelles, Gustavo S. Portes; Miranda Junior, Fausto; Fonseca, Jose Honorio A.P. da; Ajzen, Sergio; D'Ippolito, Giuseppe

2006-01-01

Objective: to propose a model to standardize computed tomography reports on abdominal aortic aneurysms. Materials and methods: interviews were carried out with members of the Vascular Surgery Division of our institution, in the period between April and October 2004, aiming at developing a standardized model of computed tomography reports on abdominal aortic aneurysms. Based on this model, a questionnaire was elaborated and sent to other nine surgeons, all of them experienced in the field of abdominal aortic surgery. The questionnaires response rate was 55.5% (5/9). Results: the most frequently mentioned parameters of interest for evaluation of abdominal aortic aneurysms were: maximum diameter of proximal aortic neck, proximal aortic neck length to lower renal arteries, shape of proximal aortic neck, maximum diameter of the aneurysm and diameter of the common iliac arteries. These data allowed the development of a proposal for a model to standardize computed tomography reports. Conclusion: a model for standardized tomographic analysis of abdominal aortic aneurysms has met vascular surgeons' needs for following-up patients and planning their treatment. (author)

Standard practice for instrumented indentation testing

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 This practice defines the basic steps of Instrumented Indentation Testing (IIT) and establishes the requirements, accuracies, and capabilities needed by an instrument to successfully perform the test and produce the data that can be used for the determination of indentation hardness and other material characteristics. IIT is a mechanical test that measures the response of a material to the imposed stress and strain of a shaped indenter by forcing the indenter into a material and monitoring the force on, and displacement of, the indenter as a function of time during the full loading-unloading test cycle. 1.2 The operational features of an IIT instrument, as well as requirements for Instrument Verification Annex A1), Standardized Reference Blocks (Annex A2) and Indenter Requirements (Annex A3) are defined. This practice is not intended to be a complete purchase specification for an IIT instrument. 1.3 With the exception of the non-mandatory Appendix X4, this practice does not define the analysis necessary...

EPA's proposed Worker Protection Standard and the burdens of the past.

Science.gov (United States)

Bohme, Susanna Rankin

2015-01-01

An Environmental Protection Agency (EPA) recommendation for extensive changes to the Agency's 40-year-old Worker Protection Standard is currently stalled in the "proposed rule" stage. The proposal, which was available for public comment until 18 August, would improve safety, training, and hazard communication policies for agricultural pesticides. Exposure to hazards, including high heat, heavy machinery, stoop labor, and pesticides, makes occupational illness uncommonly common among the USA's estimated 2.5 million farm workers. To consider the proposed revisions' likelihood of addressing historical gaps in farmworker protection. The proposal was compared to the existing Worker Protection Standard, and key aspects were analyzed in relation to existing science on farm labor hazards, as well as historic occupational health, labor and immigration policy. US law historically has left farm workers largely unprotected. These exclusions and delays have been tolerated in part thanks to the myth of the independent family farmer, but more significant is the stingy nativism that presumes to benefit from immigrant labor without assuming any responsibility to protect the humans who provide it. In the first half of the 1970s, workers lobbied for robust protections, but rule making was impeded by lack of data and by the disproportionate influence of agricultural employers who sought minimal regulation. In 1974, the EPA passed the first Worker Protection Standard for farm workers. Key aspects of the proposed revision include stronger protections against drift and re-entry exposures, better information provision and training, and increased protections for workers under 16 years. The proposed changes represent an improvement over existing legislation, but do not go far enough. The revision should be strengthened along lines suggested by farm workers themselves, and other labor laws must also be amended to give the men, women, and children who work in the fields of this country full

Closing the gap: accelerating the translational process in nanomedicine by proposing standardized characterization techniques.

Science.gov (United States)

Khorasani, Ali A; Weaver, James L; Salvador-Morales, Carolina

2014-01-01

On the cusp of widespread permeation of nanomedicine, academia, industry, and government have invested substantial financial resources in developing new ways to better treat diseases. Materials have unique physical and chemical properties at the nanoscale compared with their bulk or small-molecule analogs. These unique properties have been greatly advantageous in providing innovative solutions for medical treatments at the bench level. However, nanomedicine research has not yet fully permeated the clinical setting because of several limitations. Among these limitations are the lack of universal standards for characterizing nanomaterials and the limited knowledge that we possess regarding the interactions between nanomaterials and biological entities such as proteins. In this review, we report on recent developments in the characterization of nanomaterials as well as the newest information about the interactions between nanomaterials and proteins in the human body. We propose a standard set of techniques for universal characterization of nanomaterials. We also address relevant regulatory issues involved in the translational process for the development of drug molecules and drug delivery systems. Adherence and refinement of a universal standard in nanomaterial characterization as well as the acquisition of a deeper understanding of nanomaterials and proteins will likely accelerate the use of nanomedicine in common practice to a great extent.

A Case for Standards of Counseling Practice.

Science.gov (United States)

Anderson, Donald

1992-01-01

A mature counseling profession has entered the decade of the 1990s. Several factors including professionalism, accountability, health care consumerism, credentialism, and public demands for quality mental health care indicate a need for more definitive statements on standards of practice in counseling. In response to this need, an eight-point…

Proposals for new standardized general diagnostic criteria for the secondary headaches

DEFF Research Database (Denmark)

Olesen, J; Steiner, T; Bousser, M-G

2009-01-01

headache and chronic migraine. These changes made apparent a further need for broader revisions to the standard formulation of diagnostic criteria for the secondary headaches. Currently, the fourth criterion makes impossible the definitive diagnosis of a secondary headache until the underlying cause has...... propose maintaining a standard approach to the secondary headaches using a set of four criteria A, B, C and D, but we construct these so that the requirement for resolution or successful treatment is removed. The proposal for general diagnostic criteria for the secondary headaches will be entered...... classification are then foreseen for the next 10 years. Until the printing of ICHD-IIR, the printed ICHD-II criteria remain in place for all other purposes. We issue a plea to the headache community to use and study these proposed general criteria for the secondary headaches in order to provide more evidence...

Kodak's Photo CD and Proposed Photo YCC Color Standard.

Science.gov (United States)

Urrows, Henry; Urrows, Elizabeth

1991-01-01

Describes new technology being developed by Eastman Kodak for storing 35mm color photos on compact disk (CD) and discusses its applications for desktop publishing. Benefits of photo CD and costs are examined, a proposed universal color standard that is an improved way to represent color digitally is explained, and software is discussed. (LRW)

Standard practice for alternate actinide calibration for inductively coupled plasma-mass spectrometry

CERN Document Server

American Society for Testing and Materials. Philadelphia

2004-01-01

1.1 This practice provides guidance for an alternate linear calibration for the determination of selected actinide isotopes in appropriately prepared aqueous solutions by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). This alternate calibration is mass bias adjusted using thorium-232 (232Th) and uranium-238 (238U) standards. One of the benefits of this standard practice is the ability to calibrate for the analysis of highly radioactive actinides using calibration standards at much lower specific activities. Environmental laboratories may find this standard practice useful if facilities are not available to handle the highly radioactive standards of the individual actinides of interest. 1.2 The instrument response for a series of determinations of known concentration of 232Th and 238U defines the mass versus response relationship. For each standard concentration, the slope of the line defined by 232Th and 238U is used to derive linear calibration curves for each mass of interest using interference equ...

Standard practice for production and evaluation of field metallographic replicas

CERN Document Server

American Society for Testing and Materials. Philadelphia

2001-01-01

1.1 This practice covers recognized methods for the preparation and evaluation of cellulose acetate or plastic film replicas which have been obtained from metallographically prepared surfaces. It is designed for the evaluation of replicas to ensure that all significant features of a metallographically prepared surface have been duplicated and preserved on the replica with sufficient detail to permit both LM and SEM examination with optimum resolution and sensitivity. 1.2 This practice may be used as a controlling document in commercial situations. 1.3 The values stated in SI units are to be regarded as the standard. Inch-pound units given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

7 CFR 205.203 - Soil fertility and crop nutrient management practice standard.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Soil fertility and crop nutrient management practice standard. 205.203 Section 205.203 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) ORGANIC FOODS PRODUCTION ACT...

Standard practice for manufacturing characterization of digital detector arrays

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 This practice describes the evaluation of Digital Detector Arrays (DDAs), and assures that one common standard exists for quantitative comparison of DDAs so that an appropriate DDA is selected to meet NDT requirements. 1.2 This practice is intended for use by manufacturers or integrators of DDAs to provide quantitative results of DDA characteristics for NDT user or purchaser consumption. Some of these tests require specialized test phantoms to assure consistency among results among suppliers or manufacturers. These tests are not intended for users to complete, nor are they intended for long term stability tracking and lifetime measurements. However, they may be used for this purpose, if so desired. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropr...

Seminar program for postgraduate specialty training in general practice: proposal for a 5-year thematic catalogue

Directory of Open Access Journals (Sweden)

Sommer, Susanne

2017-11-01

Full Text Available Introduction: In different German regions, seminar programs have been conducted for General practice residents. In each region, selection and teaching of learning content is conducted in a different manner. So far, no structured, standardized curriculum has been implemented nationwide. We have investigated, if the development of a common 5-year program of learning topics is conceivable between the different university departments of General practice in Germany.Method: The seminar program working group of the DEGAM (German College of General Practitioners and Family Physicians has conducted an online survey based on information gathered via preliminary telephone conference (n=7; physicians with postgraduate teaching experience among all German university departments of General Practice and two non-university teaching institutions, identified via the internet. 884 topics were extracted from 14 Seminar programs. The topics were entered in a database, discussed and categorized: Practice management/practice work flow/standardized documentation forms/quality management (n=33 topics, common acute and chronic diseases, including disease management programs (n=29 topics, communication, neurological, psychological and psychiatric consultations (n=24 topics, common medical problems, including eye, ear, nose, throat, skin and pediatric problems (n=99 Topics family physicians general approach, including epidemiology, shared decision making, test of time (n=42 Topics. These topics have been rated for priority and desirable number of teaching-units.Results: A catalogue of 111 topics was designed, encompassing 160 teaching units. There is a suggestion of wide topics collections plus an add-on catalogue.Conclusion: A proposal for a 5-year-thematic catalogue for postgraduate training of general practice residents in Germany has been developed. This newly developed curriculum has the potential to improve knowledge and skills that have not been covered during in

Sharing without laws: an exploration of social practices and ad hoc labeling standards in online movie piracy

Directory of Open Access Journals (Sweden)

Roberto Tietzmann

2016-06-01

Full Text Available This paper discusses self-labelling standards as sharing mediators in pirated versions of movies available online. Piracy has existed since the beginning of the film industry, challenging established rules and regulations. The dynamics of digital movie piracy often try to meet viewers' expectations while ignoring any regional and premiere date restrictions. Movie piracy organises its abundant offer by generating a self-regulatory repertoire of labeling standards. In this paper we propose an exploration of social practices related to the ad hoc labeling standards as regulators of a presumed user experience in unofficial versions of the movie Captain America: The Winter Soldier. Lessons for sharing economy regulation, especially in contexts where chaotic social relationships are involved, are identified and discussed.

US Department of Energy response to standards for remedial actions at inactive uranium processing sites: Proposed rule

International Nuclear Information System (INIS)

1988-01-01

The Title I groundwater standards for inactive uranium mill tailings sites, which were promulgated on January 5, 1983, by the US Environmental Protection Agency (EPA) for the Uranium Mill Tailings Remedial Action (UMTRA) Project, were remanded to the EPA on September 3, 1985, by the US Tenth Circuit Court of Appeals. The Court instructed the EPA to compile general groundwater standards for all Title I sites. On September 24, 1987, the EPA published proposed standards (52FR36000-36008) in response to the remand. This report includes an evaluation of the potential effects of the proposed EPA groundwater standards on the UMTRA Project, as well as a discussion of the DOE's position on the proposed standards. The report also contains and appendix which provides supporting information and cost analyses. In order to assess the impacts of the proposed EPA standards, this report summarizes the proposed EPA standards in Section 2.0. The next three sections assess the impacts of the three parts of the EPA standards: Subpart A considers disposal sites; Subpart B is concerned with restoration at processing sites; and Subpart C addresses supplemental standards. Section 6.0 integrates previous sections into a recommendations section. Section 7.0 contains the DOE response to questions posed by the EPA in the preamble to the proposed standards. 6 refs., 5 figs., 3 tabs

Comparison of current practices of cardiopulmonary perfusion technology in Iran with American Society of Extracorporeal Technology's standards.

Science.gov (United States)

Faravan, Amir; Mohammadi, Nooredin; Alizadeh Ghavidel, Alireza; Toutounchi, Mohammad Zia; Ghanbari, Ameneh; Mazloomi, Mehran

2016-01-01

Standards have a significant role in showing the minimum level of optimal optimum and the expected performance. Since the perfusion technology staffs play an the leading role in providing the quality services to the patients undergoing open heart surgery with cardiopulmonary bypass machine, this study aimed to assess the standards on how Iranian perfusion technology staffs evaluate and manage the patients during the cardiopulmonary bypass process and compare their practice with the recommended standards by American Society of Extracorporeal Technology. In this descriptive study, data was collected from 48 Iranian public hospitals and educational health centers through a researcher-created questionnaire. The data collection questionnaire assessed the standards which are recommended by American Society of Extracorporeal Technology. Findings showed that appropriate measurements were carried out by the perfusion technology staffs to prevent the hemodilution and avoid the blood transfusion and unnecessary blood products, determine the initial dose of heparin based on one of the proposed methods, monitor the anticoagulants based on ACT measurement, and determine the additional doses of heparin during the cardiopulmonary bypass based on ACT or protamine titration. It was done only in 4.2% of hospitals and health centers. Current practices of cardiopulmonary perfusion technology in Iran are inappropriate based on the standards of American Society of Cardiovascular Perfusion. This represents the necessity of authorities' attention to the validation programs and development of the caring standards on one hand and continuous assessment of using these standards on the other hand.

Regional cancer centre demonstrates voluntary conformity with the national Radiation Oncology Practice Standards.

Science.gov (United States)

Manley, Stephen; Last, Andrew; Fu, Kenneth; Greenham, Stuart; Kovendy, Andrew; Shakespeare, Thomas P

2015-06-01

Radiation Oncology Practice Standards have been developed over the last 10 years and were published for use in Australia in 2011. Although the majority of the radiation oncology community supports the implementation of the standards, there has been no mechanism for uniform assessment or governance. North Coast Cancer Institute's public radiation oncology service is provided across three main service centres on the north coast of NSW. With a strong focus on quality management, we embraced the opportunity to demonstrate conformity with the Radiation Oncology Practice Standards. The Local Health District's Clinical Governance units were engaged to perform assessments of our conformity with the standards and this was signed off as complete on 16 December 2013. The process of demonstrating conformity with the Radiation Oncology Practice Standards has enhanced the culture of quality in our centres. We have demonstrated that self-assessment utilising trained auditors is a viable method for centres to demonstrate conformity. National implementation of the Radiation Oncology Practice Standards will benefit individual centres and the broader radiation oncology community to improve the service delivered to our patients.

Regional cancer centre demonstrates voluntary conformity with the national Radiation Oncology Practice Standards

Energy Technology Data Exchange (ETDEWEB)

Manley, Stephen, E-mail: stephen.manley@ncahs.health.nsw.gov.au; Last, Andrew; Fu, Kenneth; Greenham, Stuart; Kovendy, Andrew; Shakespeare, Thomas P [North Coast Cancer Institute, Lismore, New South Wales (Australia)

2015-06-15

Radiation Oncology Practice Standards have been developed over the last 10 years and were published for use in Australia in 2011. Although the majority of the radiation oncology community supports the implementation of the standards, there has been no mechanism for uniform assessment or governance. North Coast Cancer Institute's public radiation oncology service is provided across three main service centres on the north coast of NSW. With a strong focus on quality management, we embraced the opportunity to demonstrate conformity with the Radiation Oncology Practice Standards. The Local Health District's Clinical Governance units were engaged to perform assessments of our conformity with the standards and this was signed off as complete on 16 December 2013. The process of demonstrating conformity with the Radiation Oncology Practice Standards has enhanced the culture of quality in our centres. We have demonstrated that self-assessment utilising trained auditors is a viable method for centres to demonstrate conformity. National implementation of the Radiation Oncology Practice Standards will benefit individual centres and the broader radiation oncology community to improve the service delivered to our patients.

Regional cancer centre demonstrates voluntary conformity with the national Radiation Oncology Practice Standards

International Nuclear Information System (INIS)

Manley, Stephen; Last, Andrew; Fu, Kenneth; Greenham, Stuart; Kovendy, Andrew; Shakespeare, Thomas P

2015-01-01

Radiation Oncology Practice Standards have been developed over the last 10 years and were published for use in Australia in 2011. Although the majority of the radiation oncology community supports the implementation of the standards, there has been no mechanism for uniform assessment or governance. North Coast Cancer Institute's public radiation oncology service is provided across three main service centres on the north coast of NSW. With a strong focus on quality management, we embraced the opportunity to demonstrate conformity with the Radiation Oncology Practice Standards. The Local Health District's Clinical Governance units were engaged to perform assessments of our conformity with the standards and this was signed off as complete on 16 December 2013. The process of demonstrating conformity with the Radiation Oncology Practice Standards has enhanced the culture of quality in our centres. We have demonstrated that self-assessment utilising trained auditors is a viable method for centres to demonstrate conformity. National implementation of the Radiation Oncology Practice Standards will benefit individual centres and the broader radiation oncology community to improve the service delivered to our patients

Standard practice for exposing and evaluating metals and alloys in surface seawater

CERN Document Server

American Society for Testing and Materials. Philadelphia

2000-01-01

1.1 This practice covers conditions for the exposure of metals, alloys, and other materials in natural surface seawater such as those typically found in bays, harbors, channels, and so forth, as contrasted with deep ocean testing. This practice covers full immersion, tidal zone and related splash, and spray zone exposures. 1.2 This practice sets forth general procedures that should be followed in conducting seawater exposure tests so that meaningful comparisons may be made from one location to another. 1.3 This practice identifies recommended procedures for evaluating the effects of natural surface seawater on the materials exposed. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regula...

Proposal and Evaluation of Subordinate Standard Solar Irradiance Spectra: Preprint

Energy Technology Data Exchange (ETDEWEB)

Habte, Aron M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Wilbert, Stefan [German Aerospace Center (DLR); Jessen, Wilko [German Aerospace Center (DLR); Gueymard, Chris [Solar Consulting Services; Polo, Jesus [CIEMAT; Bian, Zeqiang [China Meteorological Administration; Driesse, Anton [Photovoltaic Performance Labs; Marzo, Aitor [University of Antofagasta; Armstrong, Peter [Masdar Institute of Science & Technology; Vignola, Frank [University of Oregon; Ramirez, Lourdes [CIEMAT

2018-04-12

This paper introduces a concept for global tilted irradiance (GTI) subordinate standard spectra to supplement the current standard spectra used in solar photovoltaic applications as defined in ASTM G173 and IEC60904. The proposed subordinate standard spectra correspond to atmospheric conditions and tilt angles that depart significantly from the main standard spectrum, and they can be used to more accurately represent various local conditions. For the definition of subordinate standard spectra cases with an elevation 1.5 km above sea level, the question arises whether the air mass should be calculated including a pressure correction or not. This study focuses on the impact of air mass used in standard spectra, and it uses data from 29 locations to examine which air mass is most appropriate for GTI and direct normal irradiance (DNI) spectra. Overall, it is found that the pressure-corrected air mass of 1.5 is most appropriate for DNI spectra. For GTI, a non-pressure-corrected air mass of 1.5 was found to be more appropriate.

Standard practice for verification and classification of extensometer systems

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This practice covers procedures for the verification and classification of extensometer systems, but it is not intended to be a complete purchase specification. The practice is applicable only to instruments that indicate or record values that are proportional to changes in length corresponding to either tensile or compressive strain. Extensometer systems are classified on the basis of the magnitude of their errors. 1.2 Because strain is a dimensionless quantity, this document can be used for extensometers based on either SI or US customary units of displacement. Note 1—Bonded resistance strain gauges directly bonded to a specimen cannot be calibrated or verified with the apparatus described in this practice for the verification of extensometers having definite gauge points. (See procedures as described in Test Methods E251.) 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish app...

Impact of proposed research reactor standards on reactor operation

Energy Technology Data Exchange (ETDEWEB)

Ringle, J C; Johnson, A G; Anderson, T V [Oregon State University (United States)

1974-07-01

A Standards Committee on Operation of Research Reactors, (ANS-15), sponsored by the American Nuclear Society, was organized in June 1971. Its purpose is to develop, prepare, and maintain standards for the design, construction, operation, maintenance, and decommissioning of nuclear reactors intended for research and training. Of the 15 original members, six were directly associated with operating TRIGA facilities. This committee developed a standard for the Development of Technical Specifications for Research Reactors (ANS-15.1), the revised draft of which was submitted to ANSI for review in May of 1973. The Committee then identified 10 other critical areas for standards development. Nine of these, along with ANS-15.1, are of direct interest to TRIGA owners and operators. The Committee was divided into subcommittees to work on these areas. These nine areas involve proposed standards for research reactors concerning: 1. Records and Reports (ANS-15.3) 2. Selection and Training of Personnel (ANS-15.4) 3. Effluent Monitoring (ANS-15.5) 4. Review of Experiments (ANS-15.6) 5. Siting (ANS-15.7) 6. Quality Assurance Program Guidance and Requirements (ANS-15.8) 7. Restrictions on Radioactive Effluents (ANS-15.9) 8. Decommissioning (ANS-15.10) 9. Radiological Control and Safety (ANS-15.11). The present status of each of these standards will be presented, along with their potential impact on TRIGA reactor operation. (author)

Impact of proposed research reactor standards on reactor operation

International Nuclear Information System (INIS)

Ringle, J.C.; Johnson, A.G.; Anderson, T.V.

1974-01-01

A Standards Committee on Operation of Research Reactors, (ANS-15), sponsored by the American Nuclear Society, was organized in June 1971. Its purpose is to develop, prepare, and maintain standards for the design, construction, operation, maintenance, and decommissioning of nuclear reactors intended for research and training. Of the 15 original members, six were directly associated with operating TRIGA facilities. This committee developed a standard for the Development of Technical Specifications for Research Reactors (ANS-15.1), the revised draft of which was submitted to ANSI for review in May of 1973. The Committee then identified 10 other critical areas for standards development. Nine of these, along with ANS-15.1, are of direct interest to TRIGA owners and operators. The Committee was divided into subcommittees to work on these areas. These nine areas involve proposed standards for research reactors concerning: 1. Records and Reports (ANS-15.3) 2. Selection and Training of Personnel (ANS-15.4) 3. Effluent Monitoring (ANS-15.5) 4. Review of Experiments (ANS-15.6) 5. Siting (ANS-15.7) 6. Quality Assurance Program Guidance and Requirements (ANS-15.8) 7. Restrictions on Radioactive Effluents (ANS-15.9) 8. Decommissioning (ANS-15.10) 9. Radiological Control and Safety (ANS-15.11). The present status of each of these standards will be presented, along with their potential impact on TRIGA reactor operation. (author)

Proposed standard-weight (Ws) equation and length-categorization standards for brown trout (Salmo trutta) in lentic habitats

Science.gov (United States)

Hyatt, M.W.; Hubert, W.A.

2001-01-01

We developed a standard-weight (Ws) equation for brown trout (Salmo trutta) in lentic habitats by applying the regression-line-percentile technique to samples from 49 populations in North America. The proposed Ws equation is log10 Ws = -5.422 + 3.194 log10 TL, when Ws is in grams and TL is total length in millimeters. The English-unit equivalent is log10 Ws = -3.592 + 3.194 log10 TL, when Ws is in pounds and TL is total length in inches. The equation is applicable for fish of 140-750 mm TL. Proposed length-category standards to evaluate fish within populations are: stock, 200 mm (8 in); quality, 300 mm (12 in); preferred, 400 mm (16 in); memorable, 500 mm (20 in); and trophy, 600 mm (24 in).

Narcolepsy and its treatment with stimulants. ASDA standards of practice.

Science.gov (United States)

Mitler, M M; Aldrich, M S; Koob, G F; Zarcone, V P

1994-06-01

This review is part of the standards of practice recommendations. It has been commended and reviewed by the Board of the ASDA. It reflects recommendations of the Board for the practice of sleep medicine in North America. The subcommittee is responsible for the presented write-up.

78 FR 41339 - Electric Reliability Organization Proposal To Retire Requirements in Reliability Standards

Science.gov (United States)

2013-07-10

...] Electric Reliability Organization Proposal To Retire Requirements in Reliability Standards AGENCY: Federal... Reliability Standards identified by the North American Electric Reliability Corporation (NERC), the Commission-certified Electric Reliability Organization. FOR FURTHER INFORMATION CONTACT: Kevin Ryan (Legal Information...

Food Safety and Sanitary Practices of Selected Hotels in Batangas Province, Philippines: Basis of Proposed Enhancement Measures

Directory of Open Access Journals (Sweden)

April M. Perez

2017-02-01

Full Text Available This study assessed the extent of food safety and sanitary practices of selected hotels in Batangas province as basis of proposed enhancement measures. The study utilized descriptive method to describe food safety and sanitary practices of selected hotels in Batangas province with a total of 8 hotels (256 respondents. Purposive sampling was used in the study. The questionnaires were designed using the provision of the Sanitation Code of the Philippines, validated and finalized to come up with legitimate results. The study showed that there were eight (8 hotel respondents classified as two, three, four star with considerable years of experience and adequate number of employees. The hotels demonstrated the food safety and sanitary practices always in the areas of restaurant, bar service, catering and banquet and room service. The significant pair-wise comparison for restaurant, bar service, catering and banquet and room service shows that 2 star hotels greatly differs. The researcher recommends that the management should maintain high standard of food safety and sanitary practices among its staff, upgrade the food safety and sanitary practices for food safety accreditation, continuous training of the hotel managers/employees on food safety and sanitary practices.

CPD Aligned to Competency Standards to Support Quality Practice

Directory of Open Access Journals (Sweden)

Rose Nash

2017-02-01

Full Text Available As medication experts, pharmacists are key members of the patient’s healthcare team. Pharmacists must maintain their competence to practice to remain responsive to the increasingly complex healthcare sector. This paper seeks to determine how competence training for pharmacists may enhance quality in their professional development. Results of two separately administered surveys (2012 and 2013 were compared to examine the reported continued professional development (CPD practices of Australian pharmacists. Examination of results from both studies enabled a focus on how the competency standards inform CPD practice.In the survey administered in 2012, 91% (n = 253/278 pharmacists reported that they knew their current registration requirements. However, in the survey administered in 2013, only 43% (n = 46/107 reported utilization of the National Competency Standards Framework for Pharmacists in Australia (NCS to self-asses their practice as part of their annual re-registration requirements. Fewer, 23% (n = 25/107, used the NCS to plan their CPD. This may be symptomatic of poor familiarity with the NCS, uncertainty around undertaking self-directed learning as part of a structured learning plan and/or misunderstandings around what CPD should include. This is supported by thematic analysis of pharmacists’ social media comments. Initial and ongoing competence training to support meaningful CPD requires urgent attention in Australia. The competence (knowledge, skills and attributes required to engage in meaningful CPD practice should be introduced and developed prior to entry into practice; other countries may find they are in a similar position.

A Comparative Analysis of Three Proposed Federal Renewable Electricity Standards

Energy Technology Data Exchange (ETDEWEB)

Sullivan, Patrick [National Renewable Energy Lab. (NREL), Golden, CO (United States); Logan, Jeffrey [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bird, Lori [National Renewable Energy Lab. (NREL), Golden, CO (United States); Short, Walter [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2009-05-01

This paper analyzes potential impacts of proposed national renewable electricity standard (RES) legislation. An RES is a mandate requiring certain electricity retailers to provide a minimum share of their electricity sales from qualifying renewable power generation. The analysis focuses on draft bills introduced individually by Senator Jeff Bingaman and Representative Edward Markey, and jointly by Representative Henry Waxman and Markey. The analysis uses NREL's Regional Energy Deployment System (ReEDS) model to evaluate the impacts of the proposed RES requirements on the U.S. energy sector in four scenarios.

Data Center Energy Efficiency Standards in India: Preliminary Findings from Global Practices

Energy Technology Data Exchange (ETDEWEB)

Raje, Sanyukta; Maan, Hermant; Ganguly, Suprotim; Singh, Tanvin; Jayaram, Nisha; Ghatikar, Girish; Greenberg, Steve; Kumar, Satish; Sartor, Dale

2015-06-01

Global data center energy consumption is growing rapidly. In India, information technology industry growth, fossil-fuel generation, and rising energy prices add significant operational costs and carbon emissions from energy-intensive data centers. Adoption of energy-efficient practices can improve the global competitiveness and sustainability of data centers in India. Previous studies have concluded that advancement of energy efficiency standards through policy and regulatory mechanisms is the fastest path to accelerate the adoption of energy-efficient practices in the Indian data centers. In this study, we reviewed data center energy efficiency practices in the United States, Europe, and Asia. Using evaluation metrics, we identified an initial set of energy efficiency standards applicable to the Indian context using the existing policy mechanisms. These preliminary findings support next steps to recommend energy efficiency standards and inform policy makers on strategies to adopt energy-efficient technologies and practices in Indian data centers.

Aligning Mathematical Tasks to the Common Core Standards for Mathematical Practice

OpenAIRE

Johnson, Raymond

2016-01-01

How do algebra teachers align mathematical tasks to the CCSSM Standards of Mathematical Practice? Using methods of design-based implementation research, we identified difficulties of alignment to practices and developed strategies identifying high-quality tasks.

Standard practice for leaks using bubble emission techniques

CERN Document Server

American Society for Testing and Materials. Philadelphia

2011-01-01

1.1 This practice describes accepted procedures for and factors that influence laboratory immersion corrosion tests, particularly mass loss tests. These factors include specimen preparation, apparatus, test conditions, methods of cleaning specimens, evaluation of results, and calculation and reporting of corrosion rates. This practice also emphasizes the importance of recording all pertinent data and provides a checklist for reporting test data. Other ASTM procedures for laboratory corrosion tests are tabulated in the Appendix. (Warning-In many cases the corrosion product on the reactive metals titanium and zirconium is a hard and tightly bonded oxide that defies removal by chemical or ordinary mechanical means. In many such cases, corrosion rates are established by mass gain rather than mass loss.) 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, assoc...

The uses and implications of standards in general practice consultations

DEFF Research Database (Denmark)

Lippert, Maria Laura; Reventlow, Susanne; Kousgaard, Marius Brostrøm

2017-01-01

Quality standards play an increasingly important role in primary care through their inscription in various technologies for improving professional practice. While ‘hard’ biomedical standards have been the most common and debated, current quality development initiatives increasingly seek to include...... as manifestations of an inherent conflict between principles of patient-centredness and formal biomedical quality standards. However, this study suggests that standards on the ‘softer’ aspects of care may just as well interfere with a clinical approach relying on situated and attentive interactions with patients....

Academy of Nutrition and Dietetics: standards of practice and standards of professional performance for registered dietitian nutritionists (competent, proficient, and expert) in adult weight management.

Science.gov (United States)

Jortberg, Bonnie; Myers, Eileen; Gigliotti, Linda; Ivens, Barbara J; Lebre, Monica; Burke March, Susan; Nogueira, Isadora; Nwankwo, Robin; Parkinson, Meredith R; Paulsen, Barbara; Turner, Tonya

2015-04-01

Weight management encompasses the inter-relationship of nutrition, physical activity, and health behavior change. Nutrition is key for the prevention and treatment of obesity and chronic disease and maintenance of overall health. Thus, the Weight Management Dietetic Practice Group, with guidance from the Academy of Nutrition and Dietetics Quality Management Committee, has developed Standards of Practice and Standards of Professional Performance for Registered Dietitian Nutritionists (RDNs) in Adult Weight Management as a resource for RDNs working in weight management. This document allows RDNs to assess their current skill levels and to identify areas for further professional development in this expanding practice area. This document describes the current standards for weight management practice for RDNs. The Standards of Practice represent the four steps in the Nutrition Care Process as applied to the care of patients/clients. The Standards of Professional Performance consist of six domains of professionalism: Quality in Practice, Competence and Accountability, Provision of Services, Application of Research, Communication and Application of Knowledge, and Utilization and Management of Resources. Within each standard, specific indicators provide measurable action statements that illustrate how the standard can be applied to practice. The indicators describe three skill levels (competent, proficient, and expert) for RDNs working in weight management. The Standards of Practice and Standards of Professional Performance are complementary resources for the Registered Dietitian Nutritionist in weight management. Copyright © 2015 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

76 FR 39105 - Notice of Request for Comments on Proposed Deferred Maintenance and Repairs Standards

Science.gov (United States)

2011-07-05

... FEDERAL ACCOUNTING STANDARDS ADVISORY BOARD Notice of Request for Comments on Proposed Deferred Maintenance and Repairs Standards AGENCY: Federal Accounting Standards Advisory Board. ACTION: Notice. Board... Accounting Standards Advisory Board (FASAB) is requesting comments on the Exposure Draft, Deferred...

Standard practice for digital imaging and communication in nondestructive evaluation (DICONDE) for ultrasonic test methods

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 This practice facilitates the interoperability of ultrasonic imaging equipment by specifying image data transfer and archival storage methods in commonly accepted terms. This document is intended to be used in conjunction with Practice E 2339 on Digital Imaging and Communication in Nondestructive Evaluation (DICONDE). Practice E 2339 defines an industrial adaptation of the NEMA Standards Publication titled Digital Imaging and Communications in Medicine (DICOM, see http://medical.nema.org), an international standard for image data acquisition, review, transfer and archival storage. The goal of Practice E 2339, commonly referred to as DICONDE, is to provide a standard that facilitates the display and analysis of NDE test results on any system conforming to the DICONDE standard. Toward that end, Practice E 2339 provides a data dictionary and set of information modules that are applicable to all NDE modalities. This practice supplements Practice E 2339 by providing information object definitions, information ...

Theory-generating practice. Proposing a principle for learning design

DEFF Research Database (Denmark)

Buhl, Mie

2016-01-01

This contribution proposes a principle for learning design – Theory-Generating Practice (TGP) – as an alternative to the way university courses are traditionally taught and structured, with a series of theoretical lectures isolated from practical experience and concluding with an exam or a project...... building, and takes tacit knowledge into account. The article introduces TGP, contextualizes it to a Danish tradition of didactics, and discusses it in relation to contemporary conceptual currents of didactic design and learning design. This is followed by a theoretical framing of TGP. Finally, three...

Proposed minimum reporting standards for chemical analysis Chemical Analysis Working Group (CAWG) Metabolomics Standards Initiative (MSI)

Science.gov (United States)

Amberg, Alexander; Barrett, Dave; Beale, Michael H.; Beger, Richard; Daykin, Clare A.; Fan, Teresa W.-M.; Fiehn, Oliver; Goodacre, Royston; Griffin, Julian L.; Hankemeier, Thomas; Hardy, Nigel; Harnly, James; Higashi, Richard; Kopka, Joachim; Lane, Andrew N.; Lindon, John C.; Marriott, Philip; Nicholls, Andrew W.; Reily, Michael D.; Thaden, John J.; Viant, Mark R.

2013-01-01

There is a general consensus that supports the need for standardized reporting of metadata or information describing large-scale metabolomics and other functional genomics data sets. Reporting of standard metadata provides a biological and empirical context for the data, facilitates experimental replication, and enables the re-interrogation and comparison of data by others. Accordingly, the Metabolomics Standards Initiative is building a general consensus concerning the minimum reporting standards for metabolomics experiments of which the Chemical Analysis Working Group (CAWG) is a member of this community effort. This article proposes the minimum reporting standards related to the chemical analysis aspects of metabolomics experiments including: sample preparation, experimental analysis, quality control, metabolite identification, and data pre-processing. These minimum standards currently focus mostly upon mass spectrometry and nuclear magnetic resonance spectroscopy due to the popularity of these techniques in metabolomics. However, additional input concerning other techniques is welcomed and can be provided via the CAWG on-line discussion forum at http://msi-workgroups.sourceforge.net/ or http://Msi-workgroups-feedback@lists.sourceforge.net. Further, community input related to this document can also be provided via this electronic forum. PMID:24039616

77 FR 10415 - Standards for Business Practices for Interstate Natural Gas Pipelines

Science.gov (United States)

2012-02-22

...] Standards for Business Practices for Interstate Natural Gas Pipelines AGENCY: Federal Energy Regulatory... American Energy Standards Board (NAESB) applicable to natural gas pipelines.\\1\\ The Commission also... Quadrant (WGQ) of the North American Energy Standards Board (NAESB) applicable to natural gas pipelines...

75 FR 3509 - Public Company Accounting Oversight Board; Order Approving Proposed Rules on Auditing Standard No...

Science.gov (United States)

2010-01-21

... Accounting Oversight Board; Order Approving Proposed Rules on Auditing Standard No. 7, Engagement Quality... (the ``Commission'') a notice (the ``Notice'') of proposed rules (File No. PCAOB-2009-02) on Auditing... identify any significant engagement deficiencies before it issues its audit report. Auditing Standard No. 7...

Standardization of mapping practices in the British Geological Survey

Science.gov (United States)

Allen, Peter M.

1997-07-01

Because the British Geological Survey (BGS) has had, since its foundation in 1835, a mandate to produce geological maps for the whole of Great Britain, there is a long history of introducing standard practices in the way rocks and rock units have been named, classified and illustrated on maps. The reasons for the failure of some of these practices are examined and assessed in relation to the needs of computerized systems for holding and disseminating geological information.

77 FR 43711 - Standards for Business Practices of Interstate Natural Gas Pipelines

Science.gov (United States)

2012-07-26

...; Order No. 587-V] Standards for Business Practices of Interstate Natural Gas Pipelines AGENCY: Federal... North American Energy Standards Board (NAESB) applicable to natural gas pipelines. In addition, based on... (WGQ) of the North American Energy Standards Board (NAESB) applicable to natural gas pipelines...

Standard practice for examination of welds using the alternating current field measurement technique

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 This practice describes procedures to be followed during alternating current field measurement examination of welds for baseline and service-induced surface breaking discontinuities. 1.2 This practice is intended for use on welds in any metallic material. 1.3 This practice does not establish weld acceptance criteria. 1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system might not be exact equivalents; therefore, each system shall be used independently of the other. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Wound, Ostomy, and Continence Nursing: Scope and Standards of Practice, 2nd Edition: An Executive Summary.

Science.gov (United States)

2018-04-25

Wound, ostomy, and continence (WOC) nursing was recognized as a nursing specialty by the American Nurses Association in February 2010, and the Society published the original scope and standards of WOC nursing practice in May 2010. The Wound, Ostomy, and Continence Nursing: Scope and Standards of Practice, 2nd Edition is the definitive resource promoting excellence in professional practice, quality care, and improved patient outcomes in WOC specialty practice. It can be used to articulate the value of WOC nurses to administrators, legislators, payers, patients, and others. The second edition also provides an overview of the scope of WOC nursing practice including a description of the specialty, the history and evolution of WOC nursing, characteristics of WOC nursing practice, and description of the trispecialty. The document describes various WOC nurse roles, populations served, practice settings, care coordination, and collaboration. Educational preparation, levels of practice within WOC specialty nursing, certification, mandate for continuous professional development, ethics, current trends, future considerations and challenges, and standards of WOC nursing practice and professional performance with competencies for each standard are provided. The purpose of this Executive Summary is to describe the process for developing the scope and standards document, provide an overview of the scope of WOC nursing practice, and list the standards of practice and professional performance along with the competencies for each level of WOC nurse provider. The original document is available from the WOCN Society's online book store (www.wocn.org).

Development of standards, codes of practice and guidelines at the national level

International Nuclear Information System (INIS)

Swindon, T.N.

1989-01-01

Standards, codes of practice and guidelines are defined and their different roles in radiation protection specified. The work of the major bodies that develop such documents in Australia - the National Health and Medical Research Council and the Standards Association of Australia - is discussed. The codes of practice prepared under the Environment Protection (Nuclear Codes) Act, 1978, an act of the Australian Federal Parliament, are described and the guidelines associated with them outlined. 5 refs

Theory-Generating Practice: Proposing a principle for learning design

Directory of Open Access Journals (Sweden)

Mie Buhl

2016-06-01

Full Text Available This contribution proposes a principle for learning design: Theory-Generating Practice (TGP as an alternative to the way university courses often are taught and structured with a series of theoretical lectures separate from practical experience and concluding with an exam or a project. The aim is to contribute to a development of theoretical frameworks for learning designs by suggesting TGP which may lead to new practices and turn the traditional dramaturgy for teaching upside down. TGP focuses on embodied experience prior to text reading and lectures to enhance theoretical knowledge building and takes tacit knowledge into account. The article introduces TGP and contextualizes it to a Danish tradition of didactics as well as discusses it in relation to contemporary conceptual currents of didactic design and learning design. This is followed by a theoretical framing of TGP, and is discussed through three empirical examples from bachelor and master programs involving technology, and showing three ways of practicing it.

Theory-Generating Practice: Proposing a principle for learning design

Directory of Open Access Journals (Sweden)

Mie Buhl

2016-05-01

Full Text Available This contribution proposes a principle for learning design: Theory-Generating Practice (TGP as an alternative to the way university courses often are taught and structured with a series of theoretical lectures separate from practical experience and concluding with an exam or a project. The aim is to contribute to a development of theoretical frameworks for learning designs by suggesting TGP which may lead to new practices and turn the traditional dramaturgy for teaching upside down. TGP focuses on embodied experience prior to text reading and lectures to enhance theoretical knowledge building and takes tacit knowledge into account. The article introduces TGP and contextualizes it to a Danish tradition of didactics as well as discusses it in relation to contemporary conceptual currents of didactic design and learning design. This is followed by a theoretical framing of TGP, and is discussed through three empirical examples from bachelor and master programs involving technology, and showing three ways of practicing it.

A Standard of Knowledge for the Professional Practice of Toxicology.

Science.gov (United States)

Hulla, Janis E; Kinter, Lewis B; Kelman, Bruce

2015-08-01

Employers, courts, and the general public judge the credibility of professionals based on credentials such as academic degrees, publications, memberships in professional organizations, board certifications, and professional registrations. However, the relevance and merit of these credentials can be difficult to determine objectively. Board certification can be a reliable indicator of proficiency if the certifying organization demonstrates, through regularly scheduled independent review, that its processes meet established standards and when a certificate holder is required to periodically demonstrate command of a body of knowledge that is essential to current professional practice. We report herein a current Standard of Knowledge in general toxicology compiled from the experience and opinions of 889 certified practicing professional toxicologists. An examination is the most commonly used instrument for testing a certification candidate's command of the body of knowledge. However, an examination-based certification is only creditable when the body of knowledge, to which a certification examination tests, is representative of the current knowledge, skills, and capabilities needed to effectively practice at the professional level. Thus, that body of knowledge must be the current "Standard of Knowledge" for the profession, compiled in a transparent fashion from current practitioners of the profession. This work was conducted toward ensuring the scientific integrity of the products produced by professional toxicologists.

Practical no-gold-standard evaluation framework for quantitative imaging methods: application to lesion segmentation in positron emission tomography.

Science.gov (United States)

Jha, Abhinav K; Mena, Esther; Caffo, Brian; Ashrafinia, Saeed; Rahmim, Arman; Frey, Eric; Subramaniam, Rathan M

2017-01-01

Recently, a class of no-gold-standard (NGS) techniques have been proposed to evaluate quantitative imaging methods using patient data. These techniques provide figures of merit (FoMs) quantifying the precision of the estimated quantitative value without requiring repeated measurements and without requiring a gold standard. However, applying these techniques to patient data presents several practical difficulties including assessing the underlying assumptions, accounting for patient-sampling-related uncertainty, and assessing the reliability of the estimated FoMs. To address these issues, we propose statistical tests that provide confidence in the underlying assumptions and in the reliability of the estimated FoMs. Furthermore, the NGS technique is integrated within a bootstrap-based methodology to account for patient-sampling-related uncertainty. The developed NGS framework was applied to evaluate four methods for segmenting lesions from F-Fluoro-2-deoxyglucose positron emission tomography images of patients with head-and-neck cancer on the task of precisely measuring the metabolic tumor volume. The NGS technique consistently predicted the same segmentation method as the most precise method. The proposed framework provided confidence in these results, even when gold-standard data were not available. The bootstrap-based methodology indicated improved performance of the NGS technique with larger numbers of patient studies, as was expected, and yielded consistent results as long as data from more than 80 lesions were available for the analysis.

Evaluation of health risks associated with proposed ground water standards at selected inactive uranium mill-tailings sites

International Nuclear Information System (INIS)

Hamilton, L.D.; Medeiros, W.H.; Meinhold, A.; Morris, S.C.; Moskowitz, P.D.; Nagy, J.; Lackey, K.

1989-04-01

The US Environmental Protection Agency (EPA) has proposed ground water standards applicable to all inactive uranium mill-tailings sites. The proposed standards include maximum concentration limits (MCL) for currently regulated drinking water contaminants, as well as the addition of standards for molybdenum, uranium, nitrate, and radium-226 plus radium-228. The proposed standards define the point of compliance to be everywhere downgradient of the tailings pile, and require ground water remediation to drinking water standards if MCLs are exceeded. This document presents a preliminary description of the Phase 2 efforts. The potential risks and hazards at Gunnison, Colorado and Lakeview, Oregon were estimated to demonstrate the need for a risk assessment and the usefulness of a cost-benefit approach in setting supplemental standards and determining the need for and level of restoration at UMTRA sites. 8 refs., 12 tabs

Evaluation of health risks associated with proposed ground water standards at selected inactive uranium mill-tailings sites

Energy Technology Data Exchange (ETDEWEB)

Hamilton, L.D.; Medeiros, W.H.; Meinhold, A.; Morris, S.C.; Moskowitz, P.D.; Nagy, J.; Lackey, K.

1989-04-01

The US Environmental Protection Agency (EPA) has proposed ground water standards applicable to all inactive uranium mill-tailings sites. The proposed standards include maximum concentration limits (MCL) for currently regulated drinking water contaminants, as well as the addition of standards for molybdenum, uranium, nitrate, and radium-226 plus radium-228. The proposed standards define the point of compliance to be everywhere downgradient of the tailings pile, and require ground water remediation to drinking water standards if MCLs are exceeded. This document presents a preliminary description of the Phase 2 efforts. The potential risks and hazards at Gunnison, Colorado and Lakeview, Oregon were estimated to demonstrate the need for a risk assessment and the usefulness of a cost-benefit approach in setting supplemental standards and determining the need for and level of restoration at UMTRA sites. 8 refs., 12 tabs.

Standard practice for digital imaging and communication nondestructive evaluation (DICONDE) for computed radiography (CR) test methods

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This practice facilitates the interoperability of computed radiography (CR) imaging and data acquisition equipment by specifying image data transfer and archival storage methods in commonly accepted terms. This practice is intended to be used in conjunction with Practice E2339 on Digital Imaging and Communication in Nondestructive Evaluation (DICONDE). Practice E2339 defines an industrial adaptation of the NEMA Standards Publication titled Digital Imaging and Communications in Medicine (DICOM, see http://medical.nema.org), an international standard for image data acquisition, review, storage and archival storage. The goal of Practice E2339, commonly referred to as DICONDE, is to provide a standard that facilitates the display and analysis of NDE results on any system conforming to the DICONDE standard. Toward that end, Practice E2339 provides a data dictionary and a set of information modules that are applicable to all NDE modalities. This practice supplements Practice E2339 by providing information objec...

7 CFR 205.206 - Crop pest, weed, and disease management practice standard.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Crop pest, weed, and disease management practice... Requirements § 205.206 Crop pest, weed, and disease management practice standard. (a) The producer must use management practices to prevent crop pests, weeds, and diseases including but not limited to: (1) Crop...

A Proposal for Updated Standards of Photographic Documentation in Aesthetic Medicine.

Science.gov (United States)

Prantl, Lukas; Brandl, Dirk; Ceballos, Patricia

2017-08-01

In 1998, DiBernardo et al. published a very helpful standardization of comparative (before and after) photographic documentation. These standards prevail to this day. Although most of them are useful for objective documentation of aesthetic results, there are at least 3 reasons why an update is necessary at this time: First, DiBernardo et al. focused on the prevalent standards of medical photography at that time. From a modern perspective, these standards are antiquated and not always correct. Second, silver-based analog photography has mutated into digital photography. Digitalization offers virtually unlimited potential for image manipulation using a vast array of digital Apps and tools including, but not limited to, image editing software like Photoshop. Digitalization has given rise to new questions, particularly regarding appropriate use of editing techniques to maximize or increase objectivity. Third, we suggest changes to a very small number of their medical standards in the interest of obtaining a better or more objective documentation of aesthetic results. This article is structured into 3 sections and is intended as a new proposal for photographic and medical standards for the documentation of aesthetic interventions: 1. The photographic standards. 2. The medical standards. 3. Description of editing tools which should be used to increase objectivity.

Proposal of a theoretical model for the practical nurse

Directory of Open Access Journals (Sweden)

Dolores Abril Sabater

2010-01-01

Full Text Available AIM: To determine which model of nursing is proposed by care professionals and the reason for their choice. METHOD: cross-sectional, descriptive study design. The main variable: Nursing Models and Theories. As secondary variables were collected: age, gender, years of work experience, nursing model of basic training, and course/s related. We used a self-elaborated, anonymous questionnaire, passed between April - May, 2006. Not random sample.RESULTS: 546 nurses were invited, answered 205. 38 % response rate. Virginia Henderson was the more selected model (33%, however, 42% left the question blank, 12% indicated that they wanted to work under the guidance of a model. They selected a specifically model: Knowledge of the model to their training, standardization in other centers, the characteristics of the model itself and identification with its philosophy. They are not decided by a model by ignorance, lack of time and usefulness. CONCLUSIONS: The model chosen mostly for their daily work was Virginia Henderson model, so that knowledge of a model is the main reason for their election. Professionals who choose not to use the model in their practice realize offers and calling for resources, besides to explain the lack of knowledge on this topic. To advance the nursing profession is necessary that nurse is thought over widely on the abstract concepts of the theory in our context.

Safety standards, legislation and codes of practice for fuel cell manufacture and operation

Energy Technology Data Exchange (ETDEWEB)

Wilcox, C.P.

1999-07-01

This report examines safety standards, legislation and codes of practice for fuel cell manufacture and operation in the UK, Europe and internationally. Management of health and safety in the UK is discussed, and the characteristics of phosphoric acid (PAFC), proton exchange membrane (PEM), molten carbonate (MCFC), solid oxide (SOFC) fuel cells are described. Fuel cell power plant standards and manufacture in the UK, design and operational considerations, end of life disposal, automotive fuel cell system, and fuelling and vehicular concerns are explored, and standards, legislation and codes of practice are explained in the appendix.

Use of standardized outcome measures in physical therapist practice: perceptions and applications.

Science.gov (United States)

Jette, Diane U; Halbert, James; Iverson, Courtney; Miceli, Erin; Shah, Palak

2009-02-01

Standardized instruments for measuring patients' activity limitations and participation restrictions have been advocated for use by rehabilitation professionals for many years. The available literature provides few recent reports of the use of these measures by physical therapists in the United States. The primary purpose of this study was to determine: (1) the extent of the use of standardized outcome measures and (2) perceptions regarding their benefits and barriers to their use. A secondary purpose was to examine factors associated with their use among physical therapists in clinical practice. The study used an observational design. A survey questionnaire comprising items regarding the use and perceived benefits and barriers of standardized outcome measures was sent to 1,000 randomly selected members of the American Physical Therapy Association (APTA). Forty-eight percent of participants used standardized outcome measures. The majority of participants (>90%) who used such measures believed that they enhanced communication with patients and helped direct the plan of care. The most frequently reported reasons for not using such measures included length of time for patients to complete them, length of time for clinicians to analyze the data, and difficulty for patients in completing them independently. Use of standardized outcome measures was related to specialty certification status, practice setting, and the age of the majority of patients treated. The limitations included an unvalidated survey for data collection and a sample limited to APTA members. Despite more than a decade of development and testing of standardized outcome measures appropriate for various conditions and practice settings, physical therapists have some distance to go in implementing their use routinely in most clinical settings. Based on the perceived barriers, alterations in practice management strategies and the instruments themselves may be necessary to increase their use.

75 FR 60171 - Proposed Information Collection (Credit Underwriting Standards and Procedures for Processing VA...

Science.gov (United States)

2010-09-29

... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-0521] Proposed Information Collection (Credit Underwriting Standards and Procedures for Processing VA Guaranteed Loans) Activity: Comment Request AGENCY... comment on the proposed collection of certain information by the agency. Under the Paperwork Reduction Act...

78 FR 60379 - Proposed Information Collection (Credit Underwriting Standards and Procedures for Processing VA...

Science.gov (United States)

2013-10-01

... DEPARTMENT OF VETERANS AFFAIRS [OMB Control No. 2900-0521] Proposed Information Collection (Credit Underwriting Standards and Procedures for Processing VA Guaranteed Loans) Activity: Comment Request AGENCY... comment on the proposed collection of certain information by the agency. Under the Paperwork Reduction Act...

Academy of nutrition and dietetics: revised 2014 standards of practice and standards of professional performance for registered dietitian nutritionists (competent, proficient, and expert) in sports nutrition and dietetics.

Science.gov (United States)

Steinmuller, Patricia L; Kruskall, Laura J; Karpinski, Christine A; Manore, Melinda M; Macedonio, Michele A; Meyer, Nanna L

2014-04-01

Sports nutrition and dietetics addresses relationships of nutrition with physical activity, including weight management, exercise, and physical performance. Nutrition plays a key role in the prevention and treatment of obesity and chronic disease and for maintenance of health, and the ability to engage in physical activity, sports, and other aspects of physical performance. Thus, the Sports, Cardiovascular, and Wellness Nutrition Dietetic Practice Group, with guidance from the Academy of Nutrition and Dietetics Quality Management Committee, has developed the Revised 2014 Standards of Practice and Standards of Professional Performance as a resource for Registered Dietitian Nutritionists working in sports nutrition and dietetics to assess their current skill levels and to identify areas for further professional development in this emerging practice area. The revised document reflects advances in sports nutrition and dietetics practice since the original standards were published in 2009 and replaces those standards. The Standards of Practice represents the four steps in the Nutrition Care Process as applied to the care of patients/clients. The Standards of Professional Performance covers six standards of professional performance: quality in practice, competence and accountability, provision of services, application of research, communication and application of knowledge, and utilization and management of resources. Within each standard, specific indicators provide measurable action statements that illustrate how the standards can be applied to practice. The indicators describe three skill levels (competent, proficient, and expert) for Registered Dietitian Nutritionists working in sports nutrition and dietetics. The Standards of Practice and Standards of Professional Performance are complementary resources for Registered Dietitian Nutritionists in sports nutrition and dietetics practice. Copyright © 2014 Academy of Nutrition and Dietetics. Published by Elsevier Inc

Use of antibiotics and compliance with standard practices in Poultry ...

African Journals Online (AJOL)

Use of antibiotics and compliance with standard practices in Poultry Health ... African Journal of Sustainable Development ... Antibiotics use among poultry farmers was motivated by factors such as growth promotion ( x̄ = 2.38), ...

Moving NSDC's Staff Development Standards into Practice: Innovation Configurations. Volume I

Science.gov (United States)

National Staff Development Council, 2003

2003-01-01

NSDC's groundbreaking work in developing standards for staff development has now been joined by an equally important book that spells out exactly how those standards would look if they were being implemented by school districts. An Innovation Configuration map is a device that identifies and describes the major components of a new practice--in…

Standardized Testing and the Construction of Governable Persons

Science.gov (United States)

Graham, Cameron; Neu, Dean

2004-01-01

While debates over standardized testing are ubiquitous, there has been relatively little consideration of how today's standardized testing practices have arisen. The current study provides a chronology of standardized testing within Alberta, Canada. Starting from prior work by Foucault and others on "governmentality", we propose that the…

Standard practice for monitoring atmospheric SO2 using the sulfation plate technique

CERN Document Server

American Society for Testing and Materials. Philadelphia

1997-01-01

1.1 This practice covers a weighted average effective SO2 level for a 30-day interval through the use of the sulfation plate method, a technique for estimating the effective SO2 content of the atmosphere, and especially with regard to the atmospheric corrosion of stationary structures or panels. This practice is aimed at determining SO2 levels rather than sulfuric acid aerosol or acid precipitation. 1.2 The results of this practice correlate approximately with volumetric SO2 concentrations, although the presence of dew or condensed moisture tends to enhance the capture of SO2 into the plate. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Language standardization in sociolinguistics and international business: Theory and practice across the table

DEFF Research Database (Denmark)

Linn, Andrew; Sanden, Guro Refsum; Piekkari, Rebecca

2018-01-01

Haugen to explain the history of modern Norwegian. The table is then turned and a model from international business by Piekkari, Welch and Welch is used to illuminate recent Norwegian language planning. It is found that the Grundfos case works well with the Haugen model, and the international business...... model provides a valuable practical lesson for national language planners, both showing that a “comparative standardology” is a valuable undertaking. More voices “at the table” will allow both theory and practice to be further refined and for the role of standards across society to be better understood.......This chapter addresses the issue of language standardization from two perspectives, bringing together a theoretical perspective offered by the discipline of sociolinguistics with a practical example from international business. We introduce the broad concept of standardization and embed the study...

Language standardization in sociolinguistics and international business: Theory and practice across the table

DEFF Research Database (Denmark)

Linn, Andrew; Sanden, Guro Refsum; Piekkari, Rebecca

2018-01-01

Haugen to explain the history of modern Norwegian. The table is then turned and a model from international business by Piekkari, Welch and Welch is used to illuminate recent Norwegian language planning. It is found that the Grundfos case works well with the Haugen model, and the international business......This chapter addresses the issue of language standardization from two perspectives, bringing together a theoretical perspective offered by the discipline of sociolinguistics with a practical example from international business. We introduce the broad concept of standardization and embed the study...... of language standardization in the wider discussion of standards as a means of control across society. We analyze the language policy and practice of the Danish multinational, Grundfos, and use it as a “sociolinguistic laboratory” to “test” the theory of language standardization initially elaborated by Einar...

Standardization of the bakery goods

OpenAIRE

Elżbieta Goryńska-Goldmann

2010-01-01

The article presents selected aspects of the standardization, highly valued factor that stimulates the economic development of the country. The attention was paid to the purpose of the standardization, basic normative documents and standardizing activity. Different proposals for the classification of bread applied in practice or appearing in scientific studies were presented. It was emphasised that currently legal mess exists in Poland, in terms of use of the bread classification. The necessi...

Progressive Education Standards: A Neuroscience Framework

Science.gov (United States)

O'Grady, Patty

2011-01-01

This paper proposes a coherent and unique set of 12 standards, adopting a neuroscience framework for biologically based on school reform. This model of educational principles and practices aligns with the long-standing principles and practices of the Progressive Education Movement in the United States and the emerging principles of neuroscience.…

75 FR 75186 - Interview Room Video System Standard Special Technical Committee Request for Proposals for...

Science.gov (United States)

2010-12-02

... DEPARTMENT OF JUSTICE Office of Justice Programs [OJP (NIJ) Docket No. 1534] Interview Room Video System Standard Special Technical Committee Request for Proposals for Certification and Testing Expertise... Interview Room Video System Standard and corresponding certification program requirements. This work is...

Communities of Practice and the Mediation ofTeachers' Responses to Standards-based Reform

Directory of Open Access Journals (Sweden)

Chrysan Gallucci

2003-09-01

Full Text Available This paper evaluates the usefulness of a sociocultural approach for analyzing teachers’ responses to the professional learning demands of standards-based reform policies. A policy-oriented case study of the practice of six elementary teachers who worked in two high poverty schools in a demographically changing district in the state of Washington is summarized. Key findings of that study conclude that communities of teaching practice are sites for teacher learning and are mediators of teachers’ responses to standards-based reform. Characteristics of the communities of practice, including their relative strength and openness (to learning, influence the degree to which teachers work out negotiated and thoughtful responses to policy demands. The present paper discusses the efficacy of Wenger’s (1998 theory of learning for the study of policy to practice connections.

Proposed Robust Entanglement-Based Magnetic Field Sensor Beyond the Standard Quantum Limit.

Science.gov (United States)

Tanaka, Tohru; Knott, Paul; Matsuzaki, Yuichiro; Dooley, Shane; Yamaguchi, Hiroshi; Munro, William J; Saito, Shiro

2015-10-23

Recently, there have been significant developments in entanglement-based quantum metrology. However, entanglement is fragile against experimental imperfections, and quantum sensing to beat the standard quantum limit in scaling has not yet been achieved in realistic systems. Here, we show that it is possible to overcome such restrictions so that one can sense a magnetic field with an accuracy beyond the standard quantum limit even under the effect of decoherence, by using a realistic entangled state that can be easily created even with current technology. Our scheme could pave the way for the realizations of practical entanglement-based magnetic field sensors.

Standard practice for digital imaging and communication in nondestructive evaluation (DICONDE) for digital radiographic (DR) test methods

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This practice facilitates the interoperability of digital X-ray imaging equipment by specifying image data transfer and archival methods in commonly accepted terms. This document is intended to be used in conjunction with Practice E2339 on Digital Imaging and Communication in Nondestructive Evaluation (DICONDE). Practice E2339 defines an industrial adaptation of the NEMA Standards Publication titled Digital Imaging and Communications in Medicine (DICOM, see http://medical.nema.org), an international standard for image data acquisition, review, storage and archival storage. The goal of Practice E2339, commonly referred to as DICONDE, is to provide a standard that facilitates the display and analysis of NDE results on any system conforming to the DICONDE standard. Toward that end, Practice E2339 provides a data dictionary and a set of information modules that are applicable to all NDE modalities. This practice supplements Practice E2339 by providing information object definitions, information modules and a ...

Standardization of the bakery goods

Directory of Open Access Journals (Sweden)

Elżbieta Goryńska-Goldmann

2010-01-01

Full Text Available The article presents selected aspects of the standardization, highly valued factor that stimulates the economic development of the country. The attention was paid to the purpose of the standardization, basic normative documents and standardizing activity. Different proposals for the classification of bread applied in practice or appearing in scientific studies were presented. It was emphasised that currently legal mess exists in Poland, in terms of use of the bread classification. The necessity of legal regulations of this issue by standard regulations was pointed out.

Standard Master Matrix for Light-Water Reactor Pressure Vessel Surveillance Standards, E706(0)

CERN Document Server

American Society for Testing and Materials. Philadelphia

2002-01-01

1.1 This master matrix standard describes a series of standard practices, guides, and methods for the prediction of neutron-induced changes in light-water reactor (LWR) pressure vessel (PV) and support structure steels throughout a pressure vessel's service life (Fig. 1). Some of these are existing ASTM standards, some are ASTM standards that have been modified, and some are proposed ASTM standards. General requirements of content and consistency are discussed in Section 6 . More detailed writers' and users' information, justification, and specific requirements for the nine practices, ten guides, and three methods are provided in Sections 3-5. Referenced documents are discussed in Section 2. The summary-type information that is provided in Sections 3 and 4 is essential for establishing proper understanding and communications between the writers and users of this set of matrix standards. It was extracted from the referenced documents, Section 2 and references (1-106) for use by individual writers and users. 1...

A Review of Standards of Practice for Beginning Teaching. ACER Policy Briefs. Issue 4

Science.gov (United States)

Ingvarson, Lawrence; Kleinhenz, Elizabeth

2003-01-01

This paper aims to provide a critical review and comparison of the following sets of standards of practice for teachers: (1) The Victorian Interim Teacher Class Standards (ITCS), especially Interim Teacher Class Standards for Beginning Teachers; (2) Professional Standards for Teachers; (3) The National Competencies for Beginning Teaching; (4) The…

Proposed Accreditation Standards for Degree-Granting Correspondence Programs Offered by Accredited Institutions.

Science.gov (United States)

McGraw-Hill Continuing Education Center, Washington, DC.

A study on proposed accreditation standards grew out of a need to (1) stimulate the growth of quality correspondence degree programs; and (2) provide a policy for accreditation of correspondence degree programs so that graduates would be encouraged to pursue advanced degree programs offered elsewhere by educational institutions. The study focused…

Standard Practice for Sampling for Particulate Contamination by Tape Lift

CERN Document Server

American Society for Testing and Materials. Philadelphia

2006-01-01

1.1 This practice covers procedures for sampling surfaces to determine the presence of particulate contamination, 5 m and larger. The practice consists of the application of a pressure-sensitive tape to the surface followed by the removal of particulate contamination with the removal of the tape. The tape with the adhering particles is then mounted on counting slides. Counting and measuring of particles is done by standard techniques. 1.2 This practice describes the materials and equipment required to perform sampling of surfaces for particle counting and sizing. 1.3 The criteria for acceptance or rejection of a part for conformance to surface cleanliness level requirements shall be determined by the user and are not included in this practice. 1.4 This practice is for use on surfaces that are not damaged by the application of adhesive tape. The use of this practice on any surface of any material not previously tested or for which the susceptibility to damage is unknown is not recommended. In general, metal...

77 FR 74449 - Water Quality Standards for the State of Florida's Lakes and Flowing Waters; Proposed Rule; Stay

Science.gov (United States)

2012-12-14

... Water Quality Standards for the State of Florida's Lakes and Flowing Waters; Proposed Rule; Stay AGENCY... Protection Agency (EPA) proposes to temporarily stay our regulation the ``Water Quality Standards for the... Information Does this action apply to me? Citizens concerned with water quality in Florida may be interested...

Standard practice for preparing, cleaning, and evaluating corrosion test specimens

CERN Document Server

American Society for Testing and Materials. Philadelphia

2003-01-01

1.1 This practice covers suggested procedures for preparing bare, solid metal specimens for tests, for removing corrosion products after the test has been completed, and for evaluating the corrosion damage that has occurred. Emphasis is placed on procedures related to the evaluation of corrosion by mass loss and pitting measurements. (Warning—In many cases the corrosion product on the reactive metals titanium and zirconium is a hard and tightly bonded oxide that defies removal by chemical or ordinary mechanical means. In many such cases, corrosion rates are established by mass gain rather than mass loss.) 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see 1 and 7.2.

21 CFR 130.20 - Food additives proposed for use in foods for which definitions and standards of identity are...

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Food additives proposed for use in foods for which...: GENERAL Food Additives in Standardized Foods § 130.20 Food additives proposed for use in foods for which... the act, which proposes the inclusion of a food additive in such definition and standard of identity...

Standardized Testing Practices: Effect on Graduation and NCLEX® Pass Rates.

Science.gov (United States)

Randolph, Pamela K

The use standardized testing in pre-licensure nursing programs has been accompanied by conflicting reports of effective practices. The purpose of this project was to describe standardized testing practices in one states' nursing programs and discover if the use of a cut score or oversight of remediation had any effect on (a) first time NCLEX® pass rates, (b) on-time graduation (OTG) or (c) the combination of (a) and (b). Administrators of 38 nursing programs in one Southwest state were sent surveys; surveys were returned by 34 programs (89%). Survey responses were compared to each program's NCLEX pass rate and on-time graduation rate; t-tests were conducted for significant differences associated with a required minimum score (cut score) and oversight of remediation. There were no significant differences in NCLEX pass or on-time graduation rates related to establishment of a cut score. There was a significant difference when the NCLEX pass rate and on-time graduation rate were combined (Outcome Index "OI") with significantly higher program outcomes (P=.02.) for programs without cut-scores. There were no differences associated with faculty oversight of remediation. The results of this study do not support establishment of a cut-score when implementing a standardized testing. Copyright © 2016. Published by Elsevier Inc.

Introduction to Educational Administration: Standards, Theories, and Practice. Second Edition

Science.gov (United States)

Fiore, Douglas J.

2009-01-01

Organized around the ISLLC standards, this text introduces students to the concepts and theories of educational leadership. The new edition adds coverage of such topics as data usage, ethics, innovative hiring practices, and student discipline. Appearing in the second edition are chapter-ending sections called "Point-Counterpoint" which prompt…

School Librarian as Inquisitor of Practice: Reimagine, Reflect, and React with the New Standards

Science.gov (United States)

Burns, Elizabeth

2018-01-01

The modern school library is a complex social setting "grounded in standards and best practice" (AASL 2018). The new "National School Library Standards" have refreshed the student learning standards and aligned new Shared Foundations to the school library. Additionally, the competencies for learners are now complemented by…

Formulation and practice of standards for radiation protection of γ-ray industrial computed tomography

International Nuclear Information System (INIS)

Zhou Rifeng; Wang Jue; Chen Weimin; Li Ping

2009-01-01

There are many differences between industrial CT and industrial radiography, such as imaging principle, inspection time, radiation dose and the requirements for operators etc. The national standards for radiation protection of industrial detection are not applicable to the requirements of protection and safety for γ-ray industrial CT to some extent now. In order to standardize the production and use for γ-ray industrial CT, protect the safety of operators and the public, and to promote the popularization and application of γ-ray industrial CT, it is significant to establish the national standards for radiation protection of γ-ray industrial CT as soon as possible. The purpose of this paper is to introduce the contents of this standard, and specify some important terms. Then there is a brief discussion on the existing problems during establishing such standards. At last, the paper summarize the practice of the standards passed over the past one year, which provides practicable experience for the further implementation. (authors)

78 FR 45096 - Standards for Business Practices and Communication Protocols for Public Utilities

Science.gov (United States)

2013-07-26

... Related to Terms, Definition and 24 Acronyms 6. Commission Proposal 24 D. Implementation 24 III. Notice of... between the two markets \\5\\ and re-organized and revised definitions to create a standard set of terms, definitions and acronyms applicable to all NAESB WEQ standards.\\6\\ NAESB states that the Version 003 Standards...

40 CFR Table 5 to Subpart Ffff of... - Emission Limits and Work Practice Standards for Transfer Racks

Science.gov (United States)

2010-07-01

... Standards for Transfer Racks 5 Table 5 to Subpart FFFF of Part 63 Protection of Environment ENVIRONMENTAL... Limits and Work Practice Standards for Transfer Racks As required in § 63.2475, you must meet each emission limit and work practice standard in the following table that applies to your transfer racks: For...

Annual Book of ASTM Standards, Part 23: Water; Atmospheric Analysis.

Science.gov (United States)

American Society for Testing and Materials, Philadelphia, PA.

Standards for water and atmospheric analysis are compiled in this segment, Part 23, of the American Society for Testing and Materials (ASTM) annual book of standards. It contains all current formally approved ASTM standard and tentative test methods, definitions, recommended practices, proposed methods, classifications, and specifications. One…

Development of test practice requirements for a standard method on fracture toughness testing in the transition range

International Nuclear Information System (INIS)

McCabe, D.E.; Zerbst, U.; Heerens, J.

1993-01-01

This report covers the resolution of several issues that are relevant to the ductile to brittle transition range of structural steels. One of this issues was to compare a statistical-based weakest-link method to constraint data adjustment methods for modeling the specimen size effects on fracture toughness. Another was to explore the concept of a universal transition temperature curve shape (Master Curve). Data from a Materials Properties Council round robin activity were used to test the proposals empirically. The findings of this study are inclosed in an activity for the development of a draft standard test procedure ''Test Practice for Fracture Toughness in the Transition Range''. (orig.) [de

75 FR 66725 - National Fire Protection Association (NFPA) Proposes To Revise Codes and Standards

Science.gov (United States)

2010-10-29

... for Solvent 5/23/2011 Extraction Plants. NFPA 51--2007 Standard for the Design and 11/23/2010... Practice for a 5/23/2011 Field Flame Test for Textiles and Films. NFPA 909--2010 Code for the Protection of...

Standard practice for bulk sampling of liquid uranium hexafluoride

CERN Document Server

American Society for Testing and Materials. Philadelphia

2001-01-01

1.1 This practice covers methods for withdrawing representative samples of liquid uranium hexafluoride (UF6) from bulk quantities of the material. Such samples are used for determining compliance with the applicable commercial specification, for example Specification C787 and Specification C996. 1.2 It is assumed that the bulk liquid UF6 being sampled comprises a single quality and quantity of material. This practice does not address any special additional arrangements that might be required for taking proportional or composite samples, or when the sampled bulk material is being added to UF6 residues already in a container (“heels recycle”). 1.3 The number of samples to be taken, their nominal sample weight, and their disposition shall be agreed upon between the parties. 1.4 The scope of this practice does not include provisions for preventing criticality incidents. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of th...

Finding Alignment: The Perceptions and Integration of the Next Generation Science Standards Practices by Elementary Teachers

Science.gov (United States)

Smith, Janette; Nadelson, Louis

2017-01-01

Preparing elementary-level teachers to teach in alignment with the eight Next Generation Science Standards (NGSS) practices could prove to be a daunting endeavor. However, the process may be catalyzed by leveraging elements of teacher science instruction that inherently attend to the practice standards. In this study, we investigated the science…

Potential facilitators and barriers to adopting standard treatment guidelines in clinical practice.

Science.gov (United States)

Sharma, Sangeeta; Pandit, Ajay; Tabassum, Fauzia

2017-04-18

Purpose The purpose of this paper is to assess medicines information sources accessed by clinicians, if sources differed in theory and practice and to find out the barriers and facilitators to effective guideline adoption. Design/methodology/approach In all, 183 doctors were surveyed. Barriers and facilitators were classified as: communication; potential adopters; innovation; organization characteristics and environmental/social/economic context. Findings Most of the clinicians accessed multiple information sources including standard treatment guidelines, but also consulted seniors/colleagues in practice. The top three factors influencing clinical practice guideline adoption were innovation characteristics, environmental context and individual characteristics. The respondents differed in the following areas: concerns about flexibility offered by the guideline; denying patients' individuality; professional autonomy; insights into gaps in current practice and evidence-based practice; changing practices with little or no benefit. Barriers included negative staff attitudes/beliefs, guideline integration into organizational structures/processes, time/resource constraints. Fearing third parties (government and insurance companies) restricting medicines reimbursement and poor liability protection offered by the guidelines emerged as the barriers. Facilitators include aligning organizational structures/processes with the innovation; providing leadership support to guide diffusion; increasing awareness and enabling early innovation during pre/in-service training, with regular feedback on outcomes and use. Practical implications Guideline adoption in clinical practice is partly within doctors' control. There are other key prevailing factors in the local context such as environmental, social context, professional and organizational culture affecting its adoption. Organizational policy and accreditation standards necessitating adherence can serve as a driver. Originality

Gasoline risk management: a compendium of regulations, standards, and industry practices.

Science.gov (United States)

Swick, Derek; Jaques, Andrew; Walker, J C; Estreicher, Herb

2014-11-01

This paper is part of a special series of publications regarding gasoline toxicology testing and gasoline risk management; this article covers regulations, standards, and industry practices concerning gasoline risk management. Gasoline is one of the highest volume liquid fuel products produced globally. In the U.S., gasoline production in 2013 was the highest on record (API, 2013). Regulations such as those pursuant to the Clean Air Act (CAA) (Clean Air Act, 2012: § 7401, et seq.) and many others provide the U.S. federal government with extensive authority to regulate gasoline composition, manufacture, storage, transportation and distribution practices, worker and consumer exposure, product labeling, and emissions from engines and other sources designed to operate on this fuel. The entire gasoline lifecycle-from manufacture, through distribution, to end-use-is subject to detailed, complex, and overlapping regulatory schemes intended to protect human health, welfare, and the environment. In addition to these legal requirements, industry has implemented a broad array of voluntary standards and best management practices to ensure that risks from gasoline manufacturing, distribution, and use are minimized. Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

A review of multidisciplinary clinical practice guidelines in suicide prevention: toward an emerging standard in suicide risk assessment and management, training and practice.

Science.gov (United States)

Bernert, Rebecca A; Hom, Melanie A; Roberts, Laura Weiss

2014-10-01

The current paper aims to: (1) examine clinical practice guidelines in suicide prevention across fields, organizations, and clinical specialties and (2) inform emerging standards in clinical practice, research, and training. The authors conducted a systematic literature review to identify clinical practice guidelines and resource documents in suicide prevention and risk management. The authors used PubMed, Google Scholar, and Google Search, and keywords included: clinical practice guideline, practice guideline, practice parameters, suicide, suicidality, suicidal behaviors, assessment, and management. To assess for commonalities, the authors reviewed guidelines and resource documents across 13 key content categories and assessed whether each document suggested validated assessment measures. The search generated 101 source documents, which included N = 10 clinical practice guidelines and N = 12 additional resource documents (e.g., non-formalized guidelines, tool-kits). All guidelines (100 %) provided detailed recommendations for the use of evidence-based risk factors and protective factors, 80 % provided brief (but not detailed) recommendations for the assessment of suicidal intent, and 70 % recommended risk management strategies. By comparison, only 30 % discussed standardization of risk-level categorizations and other content areas considered central to best practices in suicide prevention (e.g., restricting access to means, ethical considerations, confidentiality/legal issues, training, and postvention practices). Resource documents were largely consistent with these findings. Current guidelines address similar aspects of suicide risk assessment and management, but significant discrepancies exist. A lack of consensus was evident in recommendations across core competencies, which may be improved by increased standardization in practice and training. Additional resources appear useful for supplemental use.

Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method

CERN Document Server

American Society for Testing and Materials. Philadelphia

2009-01-01

1.1 This photographic practice determines the optical distortion and deviation of a line of sight through a simple transparent part, such as a commercial aircraft windshield or a cabin window. This practice applies to essentially flat or nearly flat parts and may not be suitable for highly curved materials. 1.2 Test Method F 801 addresses optical deviation (angluar deviation) and Test Method F 2156 addresses optical distortion using grid line slope. These test methods should be used instead of Practice F 733 whenever practical. 1.3 This standard does not purport to address the safety concerns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Environmental radiation standards and risk limitation

International Nuclear Information System (INIS)

Kocher, D.C.

1987-01-01

The Environmental Protection Agency and Nuclear Regulatory Commission have established environmental radiation standards for specific practices which correspond to limits on risk to the public that vary by several orders of magnitude and often are much less than radiation risks that are essentially unregulated, e.g., risks from radon in homes. This paper discusses a proposed framework for environmental radiation standards that would improve the correspondence with limitation of risk. This framework includes the use of limits on annual effective dose equivalent averaged over a lifetime, rather than limits on dose equivalent to whole body or any organ for each year of exposure, and consideration of exposures of younger age groups as well as adults; limits on annual effective dose equivalent averaged over a lifetime no lower than 0.25 mSv (25 mrem) per practice; maintenance of all exposures as low as reasonably achievable (ALARA); and establishment of a generally applicable de minimis dose for public exposures. Implications of the proposed regulatory framework for the current system of standards for limiting public exposures are discussed. 20 refs

Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation

CERN Document Server

American Society for Testing and Materials. Philadelphia

1988-01-01

1.1 This practice describes the calculation of luminous (photometric) transmittance and reflectance of materials from spectral radiant transmittance and reflectance data obtained from Test Method E 903. 1.2 Determination of luminous transmittance by this practice is preferred over measurement of photometric transmittance by methods using the sun as a source and a photometer as detector except for transmitting sheet materials that are inhomogeneous, patterned, or corrugated. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Deriving allowable properties of lumber : a practical guide for interpretation of ASTM standards

Science.gov (United States)

Alan Bendtsen; William L. Galligan

1978-01-01

The ASTM standards for establishing clear wood mechanical properties and for deriving structural grades and related allowable properties for visually graded lumber can be confusing and difficult for the uninitiated to interpret. This report provides a practical guide to using these standards for individuals not familiar with their application. Sample stress...

Waist Circumferences of Chilean Students: Comparison of the CDC-2012 Standard and Proposed Percentile Curves

Directory of Open Access Journals (Sweden)

Rossana Gómez-Campos

2015-07-01

Full Text Available The measurement of waist circumference (WC is considered to be an important means to control overweight and obesity in children and adolescents. The objectives of the study were to (a compare the WC measurements of Chilean students with the international CDC-2012 standard and other international standards, and (b propose a specific measurement value for the WC of Chilean students based on age and sex. A total of 3892 students (6 to 18 years old were assessed. Weight, height, body mass index (BMI, and WC were measured. WC was compared with the CDC-2012 international standard. Percentiles were constructed based on the LMS method. Chilean males had a greater WC during infancy. Subsequently, in late adolescence, males showed values lower than those of the international standards. Chilean females demonstrated values similar to the standards until the age of 12. Subsequently, females showed lower values. The 85th and 95th percentiles were adopted as cutoff points for evaluating overweight and obesity based on age and sex. The WC of Chilean students differs from the CDC-2012 curves. The regional norms proposed are a means to identify children and adolescents with a high risk of suffering from overweight and obesity disorders.

Waist Circumferences of Chilean Students: Comparison of the CDC-2012 Standard and Proposed Percentile Curves

Science.gov (United States)

Gómez-Campos, Rossana; Lee Andruske, Cinthya; Hespanhol, Jefferson; Sulla Torres, Jose; Arruda, Miguel; Luarte-Rocha, Cristian; Cossio-Bolaños, Marco Antonio

2015-01-01

The measurement of waist circumference (WC) is considered to be an important means to control overweight and obesity in children and adolescents. The objectives of the study were to (a) compare the WC measurements of Chilean students with the international CDC-2012 standard and other international standards, and (b) propose a specific measurement value for the WC of Chilean students based on age and sex. A total of 3892 students (6 to 18 years old) were assessed. Weight, height, body mass index (BMI), and WC were measured. WC was compared with the CDC-2012 international standard. Percentiles were constructed based on the LMS method. Chilean males had a greater WC during infancy. Subsequently, in late adolescence, males showed values lower than those of the international standards. Chilean females demonstrated values similar to the standards until the age of 12. Subsequently, females showed lower values. The 85th and 95th percentiles were adopted as cutoff points for evaluating overweight and obesity based on age and sex. The WC of Chilean students differs from the CDC-2012 curves. The regional norms proposed are a means to identify children and adolescents with a high risk of suffering from overweight and obesity disorders. PMID:26184250

Environmental assessment in support of proposed voluntary energy conservation standard for new residential buildings

Energy Technology Data Exchange (ETDEWEB)

Hadley, D.L.; Parker, G.B.; Callaway, J.W.; Marsh, S.J.; Roop, J.M.; Taylor, Z.T.

1989-06-01

The objective of this environmental assessment (EA) is to identify the potential environmental impacts that could result from the proposed voluntary residential standard (VOLRES) on private sector construction of new residential buildings. 49 refs., 15 tabs.

SEnviro: A Sensorized Platform Proposal Using Open Hardware and Open Standards

Directory of Open Access Journals (Sweden)

Sergio Trilles

2015-03-01

Full Text Available The need for constant monitoring of environmental conditions has produced an increase in the development of wireless sensor networks (WSN. The drive towards smart cities has produced the need for smart sensors to be able to monitor what is happening in our cities. This, combined with the decrease in hardware component prices and the increase in the popularity of open hardware, has favored the deployment of sensor networks based on open hardware. The new trends in Internet Protocol (IP communication between sensor nodes allow sensor access via the Internet, turning them into smart objects (Internet of Things and Web of Things. Currently, WSNs provide data in different formats. There is a lack of communication protocol standardization, which turns into interoperability issues when connecting different sensor networks or even when connecting different sensor nodes within the same network. This work presents a sensorized platform proposal that adheres to the principles of the Internet of Things and theWeb of Things. Wireless sensor nodes were built using open hardware solutions, and communications rely on the HTTP/IP Internet protocols. The Open Geospatial Consortium (OGC SensorThings API candidate standard was used as a neutral format to avoid interoperability issues. An environmental WSN developed following the proposed architecture was built as a proof of concept. Details on how to build each node and a study regarding energy concerns are presented.

SEnviro: a sensorized platform proposal using open hardware and open standards.

Science.gov (United States)

Trilles, Sergio; Luján, Alejandro; Belmonte, Óscar; Montoliu, Raúl; Torres-Sospedra, Joaquín; Huerta, Joaquín

2015-03-06

The need for constant monitoring of environmental conditions has produced an increase in the development of wireless sensor networks (WSN). The drive towards smart cities has produced the need for smart sensors to be able to monitor what is happening in our cities. This, combined with the decrease in hardware component prices and the increase in the popularity of open hardware, has favored the deployment of sensor networks based on open hardware. The new trends in Internet Protocol (IP) communication between sensor nodes allow sensor access via the Internet, turning them into smart objects (Internet of Things and Web of Things). Currently, WSNs provide data in different formats. There is a lack of communication protocol standardization, which turns into interoperability issues when connecting different sensor networks or even when connecting different sensor nodes within the same network. This work presents a sensorized platform proposal that adheres to the principles of the Internet of Things and theWeb of Things. Wireless sensor nodes were built using open hardware solutions, and communications rely on the HTTP/IP Internet protocols. The Open Geospatial Consortium (OGC) SensorThings API candidate standard was used as a neutral format to avoid interoperability issues. An environmental WSN developed following the proposed architecture was built as a proof of concept. Details on how to build each node and a study regarding energy concerns are presented.

Knowledge, attitude, and practice of quality standards in small-sized public hospitals, Saudi Arabia

Directory of Open Access Journals (Sweden)

Fahad Khamis Alomari

2015-01-01

Full Text Available Objectives: The aim of this study was to assess current situations in small size hospitals regarding knowledge of staff, their attitude and practice of quality standards, in order to set a plan to improve the current situations and overcome barriers of quality practice. Materials and Methods: A descriptive cross-sectional research was conducted by a validated self-administered questionnaire using systematic random technique. Results: The study included about 37.7% Physicians followed by 28.3% nurses, and 18.8% administrators. Median percentage of participants′ knowledge and attitude scores regarding healthcare quality was 48% and 80% respectively. Meanwhile, the median percentage of participants′ perception toward hospital support and implementation of healthcare quality was 54% and 50% respectively. The main barriers for quality standards implementation and practicing were; staff resistance (84.8% followed by deficient knowledge (81.1%. Knowledge showed significant positive correlation with hospital application of quality standards (P = 0.001. Conclusion: The researcher concluded that improvement of knowledge and attitude toward implementation of quality standards as well as leadership commitment to quality and change management were a critical element for organisational shifting transformation to implementing quality of care. Focusing on small hospital and providing more support with all resources for implementation of quality standards through proper education and training for all staff categories are highly recommended.

A proposed grading system for standardizing tumor consistency of intracranial meningiomas.

Science.gov (United States)

Zada, Gabriel; Yashar, Parham; Robison, Aaron; Winer, Jesse; Khalessi, Alexander; Mack, William J; Giannotta, Steven L

2013-12-01

grade was 0.87 (SE 0.06, 95% CI 0.76-0.99), with 90% user agreement. Kappa analysis scores for minimum and maximum grades of tumor regions were 0.69 (agreement 72%) and 0.75 (agreement 78%), respectively. The kappa analysis score for tumor vascularity grading was 0.56 (agreement 76%). Overall consistency did not correlate with patient age, tumor location, or tumor size. A higher tumor vascularity grade was associated with a larger tumor diameter (p = 0.045) and with skull base location (p = 0.02). The proposed grading system provides a reliable, practical, and objective assessment of meningioma consistency and facilitates communication among providers. This system also accounts for heterogeneity in tumor consistency. With the proposed scale, meningioma consistency can be standardized as groundwork for future studies relating to surgical outcomes, predictability of consistency and vascularity using neuroimaging techniques, and effectiveness of various surgical instruments.

Development of Australian clinical practice outcome standards for graduates of critical care nurse education.

Science.gov (United States)

Gill, Fenella J; Leslie, Gavin D; Grech, Carol; Boldy, Duncan; Latour, Jos M

2015-02-01

To develop critical care nurse education practice standards. Critical care specialist education for registered nurses in Australia is provided at graduate level. Considerable variation exists across courses with no framework to guide practice outcomes or evidence supporting the level of qualification. An eDelphi technique involved the iterative process of a national expert panel responding to three survey rounds. For the first round, 84 statements, organised within six domains, were developed from earlier phases of the study that included a literature review, analysis of critical care courses and input from health consumers. The panel, which represented the perspectives of four stakeholder groups, responded to two rating scales: level of importance and level of practice. Of 105 experts who agreed to participate, 92 (88%) completed survey round I; 85 (92%) round II; and 73 (86%) round III. Of the 98 statements, 75 were rated as having a high level of importance - median 7 (IQR 6-7); 14 were rated as having a moderate level of importance - median 6 (IQR 5-7); and nine were rated as having a low level of importance - median 4 (IQR 4-6)-6 (IQR 4-6). The majority of the panel rated graduate level of practice as 'demonstrates independently' or 'teaches or supervises others' for 80 statements. For 18 statements, there was no category selected by 50% or more of the panel. The process resulted in the development of 98 practice standards, categorised into three levels, indicating a practice outcome level by the practitioner who can independently provide nursing care for a variety of critically ill patients in most contexts, using a patient- and family-focused approach. The graduate practice outcomes provide a critical care qualification definition for nursing workforce standards and can be used by course providers to achieve consistent practice outcomes. © 2014 John Wiley & Sons Ltd.

Standard contract terms regulation in the proposal for a common European sales law

NARCIS (Netherlands)

Loos, M.B.M.

2012-01-01

In this paper, the regulation in standard contract terms in the proposal for a Commono European Sales Law (CESL) is compared with the regulation in the Unfair Terms Directive, the Draft Common Frame of Reference (DCFR) and the Vienna Sales Convention (CISG). The paper starts with an overview of the

Standard practice for digital imaging and communication in nondestructive evaluation (DICONDE) for X-ray computed tomography (CT) test methods

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This practice facilitates the interoperability of X-ray computed tomography (CT) imaging equipment by specifying image data transfer and archival storage methods in commonly accepted terms. This document is intended to be used in conjunction with Practice E2339 on Digital Imaging and Communication in Nondestructive Evaluation (DICONDE). Practice E2339 defines an industrial adaptation of the NEMA Standards Publication titled Digital Imaging and Communications in Medicine (DICOM, see http://medical.nema.org), an international standard for image data acquisition, review, storage and archival storage. The goal of Practice E2339, commonly referred to as DICONDE, is to provide a standard that facilitates the display and analysis of NDE test results on any system conforming to the DICONDE standard. Toward that end, Practice E2339 provides a data dictionary and a set of information modules that are applicable to all NDE modalities. This practice supplements Practice E2339 by providing information object definitio...

Clinical practice guidelines: 2004 standards, options and recommendations for the management of patient with adenocarcinoma of the stomach - radiotherapy

International Nuclear Information System (INIS)

Ychou, M.; Duffour, J.; Lemanski, C.; Masson, B.; Gory-Delabaere, G.; Bosquet, L.; Blanc, P.; Giovannini, M.; Monge, G.; Guillemin, F.; Marchal, F.; Conroy, T.; Merrouche, Y.; Adenis, A.; Bosset, J.F.; Bouche, O.; Pezet, D.; Triboulet, J.P.

2004-01-01

Context. - The 'Standards, Options and Recommendations' (SOR) project, started in 1993, is a collaboration between the Federation of French Cancer Centers (FNCLCC), the 20 French regional cancer centers, and specialists from French Public Universities, General Hospitals and Private Clinics. The main objective is the development of clinical practice guidelines to improve the quality of health care and the outcome of cancer patients. Objectives. - To elaborate clinical practice guidelines for patients with stomach adenocarcinoma. These recommendations cover the diagnosis, treatment and follow-up of these tumors. Methods. - The methodology is based on a literature review and critical appraisal by a multidisciplinary group of experts, with feedback from specialists in cancer care delivery. The Standards, Options and Recommendations are thus based on the best available evidence and expert agreement. Results. - Adjuvant radiation therapy alone is not a standard treatment for patients with stomach adenocarcinoma. Adjuvant concomitant chemoradiotherapy is not a standard treatment for patients with stage II or III stomach adenocarcinoma R0, with D1 or D2 lymphadenectomy who have undergone surgery. Following surgical resection, adjuvant concomitant chemoradiotherapy should be proposed to patients without de-nutrition with a lymphadenectomy < D1 (fewer than 15 lymph nodes examined) and those with T3 and/or N+ tumours following the protocol used in the MacDonald trials (SWOG-9008) (Level of evidence B1). Adjuvant concomitant chemoradiotherapy can be administered to patients without de-nutrition with D1 or D2 lymphadenectomy and with involvement of regional lymph nodes (N2 or N3). (authors)

Standard practice for in situ examination of ferromagnetic Heat-Exchanger tubes using remote field testing

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This practice describes procedures to be followed during remote field examination of installed ferromagnetic heat-exchanger tubing for baseline and service-induced discontinuities. 1.2 This practice is intended for use on ferromagnetic tubes with outside diameters from 0.500 to 2.000 in. [12.70 to 50.80 mm], with wall thicknesses in the range from 0.028 to 0.134 in. [0.71 to 3.40 mm]. 1.3 This practice does not establish tube acceptance criteria; the tube acceptance criteria must be specified by the using parties. 1.4 Units—The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this practice to establ...

Technical comments on EPA`s proposed revisions to the National Ambient Air Quality Standard for particulate matter

Energy Technology Data Exchange (ETDEWEB)

Lipfert, F.W.

1997-03-01

The US Environmental Protection Agency (EPA) has proposed new ambient air quality standards specifically for fine particulate matter, regulating concentrations of particles with median aerodynamic diameters less than 2.5 {mu}m (PM{sub 2.5}). Two new standards have been proposed: a maximum 24-hr concentration that is intended to protect against acute health effects, and an annual concentration limit that is intended to protect against longer-term health effects. EPA has also proposed a slight relaxation of the 24-hr standard for inhalable particles (PM{sub 10}), by allowing additional exceedances each year. Fine particles are currently being indirectly controlled by means of regulations for PM{sub 10} and TSP, under the Clean Air Act of 1970 and subsequent amendments. Although routine monitoring of PM{sub 2.5} is rare and data are sparse, the available data indicate that ambient concentrations have been declining at about 6% per year under existing regulations.

Best practices in selecting performance measures and standards for effective asset management.

Science.gov (United States)

2011-06-01

"This report assesses and provides guidance on best practices in performance measurement, management and standards : setting for effective Transportation Asset Management (TAM). The study is conducted through a literature review, a : survey of the 50...

48 CFR 9904.420 - Accounting for independent research and development costs and bid and proposal costs.

Science.gov (United States)

2010-10-01

... Regulations System COST ACCOUNTING STANDARDS BOARD, OFFICE OF FEDERAL PROCUREMENT POLICY, OFFICE OF MANAGEMENT AND BUDGET PROCUREMENT PRACTICES AND COST ACCOUNTING STANDARDS COST ACCOUNTING STANDARDS 9904.420 Accounting for independent research and development costs and bid and proposal costs. ...

Classical table services in commercial catering: standardization proposal and clarifications for future researches

Directory of Open Access Journals (Sweden)

Rodolfo Wendhausen Krause

2016-08-01

Full Text Available This study aims to synthesize the scientific knowledge with the empirical knowledge of the authors of this article on the four main types/styles of individual services in gastronomic full service establishments. In addition, it seeks to, as secondary objectives, to simplify and standardize the types of classic services in restaurants. These objectives were met through a positivist methodological approach. It had as research techniques a comparative analysis and synthesis of the state of the art on the typology of classical services with the empirical knowledge of the authors. Subsequently, the validation of standardization proposal was made by a panel of evaluators. We came to simplify the services into three basic categories: French Service; Direct English Service and Platted Service. It is understood that, because it is an exploratory study, the proposal is the beginning of scientific research on the subject. Therefore, it has to be investigated in greater depth in future studies. Therefore, the research field of the mise en place is the area that greater needs research of this nature.

Some nonscientific influences on radiation protection standards and practice

International Nuclear Information System (INIS)

Taylor, L.S.

1980-01-01

The theme of this lecture is that we have sufficient knowledge about the biomedical effects of ionizing radiation for adequate radiation protection but the problem of controlling radiation uses is complicated by philosophical, sociological, political, economic and moral considerations. The scientific problem of 'thresholds' and some nonscientific factors which may influence protection practices and hence influence the setting of numerical protection standards are discussed. The influence of the media on public opinion and the need for public education is stressed. (U.K.)

Standard Practice for Dosimetry of Proton Beams for use in Radiation Effects Testing of Electronics

Energy Technology Data Exchange (ETDEWEB)

McMahan, Margaret A.; Blackmore, Ewart; Cascio, Ethan W.; Castaneda, Carlos; von Przewoski, Barbara; Eisen, Harvey

2008-07-25

Representatives of facilities that routinely deliver protons for radiation effect testing are collaborating to establish a set of standard best practices for proton dosimetry. These best practices will be submitted to the ASTM International for adoption.

Standard Practice for Dosimetry of Proton Beams for use in Radiation Effects Testing of Electronics

International Nuclear Information System (INIS)

McMahan, Margaret A.; Blackmore, Ewart; Cascio, Ethan W.; Castaneda, Carlos; von Przewoski, Barbara; Eisen, Harvey

2008-01-01

Representatives of facilities that routinely deliver protons for radiation effect testing are collaborating to establish a set of standard best practices for proton dosimetry. These best practices will be submitted to the ASTM International for adoption

Chapter 6. Operation of electrolytic cell in standard operating practices

International Nuclear Information System (INIS)

Yanko, E.A.; Kabirov, Sh.O.; Safiev, Kh.; Azizov, B.S.; Mirpochaev, Kh.A.

2011-01-01

This chapter is devoted to operation of electrolytic cell in standard operating practices. Therefore, the electrolyte temperature, the composition of electrolyte, including the level of metals was considered. The regulation of electrolyte composition by liquidus temperature and electrolyte overheating was studied. Damping of anode effects was studied as well. Maintenance of electrolytic cells was described. Heat and energy balances of aluminium electrolytic cells were considered.

Light-water reactor pressure vessel surveillance standards

International Nuclear Information System (INIS)

Anon.

1981-01-01

The master matrix standard describes a series of standard practices, guides, and methods for the prediction of neutron-induced changes in light-water reactor (LWR) pressure vessel steels throughout a pressure vessel's service life. Some of these are existing American Society for Testing and Materials (ASTM) standards, some are ASTM standards that have been modified, and some are newly proposed ASTM standards. The current (1) scope, (2) areas of application, (3) interrelationships, and (4) status and time table of development, improvement, validation, and calibration for a series of 16 ASTM standards are defined. The standard also includes a discussion of LWR pressure vessel surveillance - justification, requirements, and status of work

Definition of terms for practical superconductors

International Nuclear Information System (INIS)

Fickett, F.R.; Kaplan, S.B.; Powell, R.L.; Radebaugh, R.; Clark, A.F.

1980-01-01

The definitions of terms used in describing the phenomenology and measurement practices of practical superconductive materials are proposed. The definitions cover the subject categories of: 1, fundamental states and flux phenomena, 2, critical parameters, 3, fabrication, stabilization, and transient losses, and 4, Josephson phenomena. It is intended that these terms will become the basis for development of standard measurement practices and responses are invited. (author)

Definitions of terms for practical superconductors

International Nuclear Information System (INIS)

Read, D.T.; Ekin, J.W.; Powell, R.L.; Clark, A.F.

1979-01-01

The definitions of terms used in describing the phenomenology and measurement practices of practical superconductive materials are proposed. The definitions cover the subject categories of: (1) fundamental states and flux phenomena; (2) critical parameters; (3) fabrication, stabilization, and transient losses; and (4) Josephson phenomena. It is intended that these terms will become the basis for the development of standard measurement practices and responses are invited. (author)

Definitions of terms for practical superconductors

International Nuclear Information System (INIS)

Powell, R.; Clark, A.F.

1977-01-01

The definitions of terms used in describing the phenomenology and measurement practices of practical superconductive materials are proposed. The definitions cover the subject categories of: (1) fundamental states and flux phenomena, (2) critical parameters, (3) fabrication, stabilization, and transient losses, and (4) Josephson phenomena. It is intended that these terms become the basis for the development of standard measurement practices and responses are invited. (author)

78 FR 59981 - Proposed Revision to Physical Security-Standard Design Certification and Operating Reactors

Science.gov (United States)

2013-09-30

... Design Certification and Operating Reactors AGENCY: Nuclear Regulatory Commission. ACTION: Standard... Design Certification and Operating Reactors.'' The NRC seeks comments on the proposed revised section of... subject): Federal Rulemaking Web site: Go to http://www.regulations.gov and search for Docket ID NRC-2013...

[Good agricultural practice (GAP) of Chinese materia medica (CMM) for ten years: achievements, problems and proposals].

Science.gov (United States)

Guo, Lan-Ping; Zhang, Yan; Zhu, Shou-Dong; Wang, Gui-Hua; Wang, Xiu; Zhang, Xiao-Bo; Chen, Mei-Lan; He, Ya-Li; Han, Bang-Xing; Chen, Nai-Fu; Huang, Lu-Qi

2014-04-01

This paper aims to summarize the achievements during the implementation process of good agricultural practice (GAP) in Chinese Materia Medica (CMM), and on basis of analyzing the existing problems of GAP, to propose further implementation of GAP in TCM growing. Since the launch of GAP in CMM growing ten years ago, it has acquired great achievements, including: (1) The promulgation of a series of measures for the administration of the GAP approval in the CMM growing; (2) The expanded planting area of CMM; (3) The increased awareness of standardized CMM growing among farmers and enterprises; (4) The establishment of GAP implementation bases for CMM growing; (5) The improvement of theory and methodology for CMM growing; (6) The development of a large group of experts and scholars in GAP approval for CMM production. The problems existing in the production include: (1) A deep understanding of GAP and its certification is still needed; (2) The distribution of the certification base is not reasonable; (3) The geo-economics effect and the backward farming practices are thought to be the bottlenecks in the standardization of CMM growing and the scale production of CMM; (4) Low comparative effectiveness limits the development of the GAP; (5) The base of breeding improved variety is blank; (6) The immature of the cultivation technique lead to the risk of production process; (7) The degradation of soil microbial and the continuous cropping obstacle restrict the sustainable development of the GAP base. To further promote the health and orderly GAP in the CMM growing, the authors propose: (1) To change the mode of production; (2) To establish a sound standard system so as to ensure quality products for fair prices; (3) To fully consider the geo-economic culture and vigorously promote the definite cultivating of traditional Chinese medicinal materials; (4) To strengthen the transformation and generalization of basic researches and achievements, in order to provide technical

Change in ranking order of prescribing patterns by age and sex standardization of the practice population--audit may be misleading

DEFF Research Database (Denmark)

Olesen, Frede; Vedsted, Peter; Nielsen, Jørgen Nørskov

1996-01-01

OBJECTIVE: To demonstrate whether standardization of practice populations by age and sex changes the internal prescription ranking order of a group of practices. DESIGN: Data on the prescribing of cardiovascular drugs in a group of practices were obtained from a county-based database. Information...... on the age, sex, and numbers of patients per practice was also obtained. The direct standardization method was used to adjust practice populations for age and sex. SETTING: The town of Randers, Aarhus County, Denmark. SUBJECTS: 35 practices, 41 GPs. MAIN OUTCOME MEASURES: Ranking of the 35 practices...... of the practices. Only four practices did not change ranking position, while four moved more than ten places. The slope between highest and lowest ranked practice did not diminish after standardization. CONCLUSION: Care should be taken when comparing peer prescribing patterns from crude utilization data, and we...

40 CFR Table 36 to Subpart Uuu of... - Work Practice Standards for HAP Emissions From Bypass Lines

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Work Practice Standards for HAP Emissions From Bypass Lines 36 Table 36 to Subpart UUU of Part 63 Protection of Environment ENVIRONMENTAL..., Table 36 Table 36 to Subpart UUU of Part 63—Work Practice Standards for HAP Emissions From Bypass Lines...

[Healthcare professionals' knowledge, attitudes and practices in relation to standard hospital precautions].

Science.gov (United States)

Mandana Bambenongama, Norbert; Losimba Likwela, Joris

2013-01-01

The infectious risk in the healthcare setting is potentially ubiquitous. Several infectious agents may be transmitted to healthcare professionals, most of which are carried by blood and body fluids. The aim of this study was to assess knowledge, attitudes and practices of healthcare workers in delivery rooms and operating theatres about standard precautions in healthcare settings in order to deduce the actions to be implemented to improve their security. A descriptive cross-sectional survey was conducted in September 2011. A questionnaire was sent to 96 people using the direct interview technique. Only 20% of study subjects were familiar with the main bloodborne viruses (HBV, HCV and HIV). 67.8% of them considered that standard precautions must be applied only to women in labour and suspected HIV-positive patients. Almost all respondents (91.1%) had already been subject to at least one AES during the last 12 months. Respondents appeared to have a poor knowledge of the recommended actions following an AES. Recapping of needles after care is a practice reported by 55.6% of respondents. Routine use of protective barriers is unsatisfactory. The frequent failure of systematic application of standard precautions in healthcare settings by healthcare workers in the city of Isiro should lead the Ministry of Health to implement a process designed to increase awareness about standard precautions and improve the equipment necessary for strict compliance with these precautions.

A practical proposal for neutron dosimetry in radiation protection

International Nuclear Information System (INIS)

Busuoli, G.; Pelliccioni, M.

1985-01-01

The innovations recommended in ICRP Publication 26 give rise to questionable consequences for current radiation protection practice. One of the most efficient is a proliferation of quantities for external exposure, the so called ''operational quantities'', devoid of any physical basis and scientifically undesirable. This risks undermining the unitary order given to the formulation of the limits. Moreover, as soon as an agreement is reached, then most of the instrumentation used at present should be replaced or modified. In the case of neutron dosimetry, at the moment, changes would be inappropriate. This is because one must take into account the results from the reassessment of the doses received by Japanese who were exposed at Hiroshima and Nagasaki, and the recent rumours about an increase of the quality factor at low doses. While awaiting further reflection on the matter, the way to continue to use the most popular neutron environmental instrument, the rem-counter is explained. The proposed solution, which is as open to question as any other, should at least allow considerable economical advantages and secure the continuity of current practice. (author)

75 FR 60616 - Commission Guidance Regarding Auditing, Attestation, and Related Professional Practice Standards...

Science.gov (United States)

2010-10-01

... Regarding Auditing, Attestation, and Related Professional Practice Standards Related To Brokers and Dealers... Oversight Board in the Dodd-Frank Wall Street Reform and Consumer Protection Act to establish auditing... 60617

Standard practice for preparation and use of direct tension stress-corrosion test specimens

CERN Document Server

American Society for Testing and Materials. Philadelphia

1985-01-01

1.1 This practice covers procedures for designing, preparing, and using ASTM standard tension test specimens for investigating susceptibility to stress-corrosion cracking. Axially loaded specimens may be stressed quantitatively with equipment for application of either a constant load, constant strain, or with a continuously increasing strain. 1.2 Tension test specimens are adaptable for testing a wide variety of product forms as well as parts joined by welding, riveting, or various other methods. 1.3 The exposure of specimens in a corrosive environment is treated only briefly because other standards are being prepared to deal with this aspect. Meanwhile, the investigator is referred to Practices G35, G36, G37, and G44, and to ASTM Special Technical Publication 425 (1).

Standard practice for sampling special nuclear materials in multi-container lots

CERN Document Server

American Society for Testing and Materials. Philadelphia

1987-01-01

1.1 This practice provides an aid in designing a sampling and analysis plan for the purpose of minimizing random error in the measurement of the amount of nuclear material in a lot consisting of several containers. The problem addressed is the selection of the number of containers to be sampled, the number of samples to be taken from each sampled container, and the number of aliquot analyses to be performed on each sample. 1.2 This practice provides examples for application as well as the necessary development for understanding the statistics involved. The uniqueness of most situations does not allow presentation of step-by-step procedures for designing sampling plans. It is recommended that a statistician experienced in materials sampling be consulted when developing such plans. 1.3 The values stated in SI units are to be regarded as the standard. 1.4 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standar...

Current and proposed revisions, changes, and modifications to American codes and standards to address packaging, handling, and transportation of radioactive materials and how they relate to comparable international regulations

International Nuclear Information System (INIS)

Borter, W.H.; Froehlich, C.H.

2004-01-01

This paper addresses current and proposed revisions, additions, and modifications to American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (BPVC) (i.e., ''ASMEthe Code'') Section III, Division 3 and American National Standards Institute (ANSI)/ASME N14.6. It provides insight into the ongoing processes of the associated committees and highlights important revisions, changes, and modifications to this Code and Standard. The ASME Code has developed and issued Division 3 to address items associated with the transportation and storage of radioactive materials. It currently only addresses ''General Requirements'' in Subsections WA and ''Class TP (Type B) Containments'' (Transportation Packages) in Subsection WB, but is in the process of adding a new Subsection WC to address ''Class SC'' (Storage Containments). ANSI/ASME Standard N14.6 which interacts with components constructed to Division 3 by addressinges special lifting devices for radioactive material shipping containers. This Standard is in the process of a complete re-write. This Code and Standard can be classified as ''dynamic'' in that their committees meet at least four times a year to evaluate proposed modifications and additions that reflect current safety practices in the nuclear industry. These evaluations include the possible addition of new materials, fabrication processes, examination methods, and testing requirements. An overview of this ongoing process is presented in this paper along with highlights of the more important proposed revisions, changes, and modifications and how they relate to United States (US) and international regulations and guidance like International Atomic Energy Agency (IAEA) Requirement No. TS-R-1

Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This practice covers a procedure for recording data of atmospheric corrosion tests of metallic-coated steel specimens. Its objective is the assurance of (1) complete identification of materials before testing, (2) objective reporting of material appearance during visual inspections, and (3) adequate photographic, micrographic, and chemical laboratory examinations at specific stages of deterioration, and at the end of the tests. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Proposed Rule for Control of Air Pollution From New Motor Vehicles: Proposed Heavy-Duty Engine and Vehicle Standards and Highway Diesel Fuel Sulfur Control Requirements

Science.gov (United States)

Rule summary, CFR citations and additional resources concerning proposed new emission standards that will begin to take effect in 2007 and corresponding diesel fuel requirements that take effect in 2006.

78 FR 49690 - Amendment to Standards and Practices for All Appropriate Inquiries

Science.gov (United States)

2013-08-15

... business practice, in complying with a federal regulation. Today's action does not require any person to... includes information claimed to be Confidential Business Information (CBI) or other information whose... Entities Today's action offers certain parties the option of using an available industry standard to...

The Adoption and Diffusion of an NHRD Standard: A Conceptual Framework

Science.gov (United States)

Murphy, Aileen; Garavan, Thomas N.

2009-01-01

This article proposes a conceptual framework to explain the adoption and diffusion of a national human resource development (NHRD) standard. NHRD standards are used by governments to promote training and development in organizations and increase the professionalization of practices used by organizations. Institutional theory suggests that adoption…

Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Results, E706(IA)

CERN Document Server

American Society for Testing and Materials. Philadelphia

2001-01-01

1.1 This practice covers the methodology, summarized in Annex A1, to be used in the analysis and interpretation of neutron exposure data obtained from LWR pressure vessel surveillance programs; and, based on the results of that analysis, establishes a formalism to be used to evaluate present and future condition of the pressure vessel and its support structures (1-70). 1.2 This practice relies on, and ties together, the application of several supporting ASTM standard practices, guides, and methods (see Master Matrix E 706) (1, 5, 13, 48, 49). In order to make this practice at least partially self-contained, a moderate amount of discussion is provided in areas relating to ASTM and other documents. Support subject areas that are discussed include reactor physics calculations, dosimeter selection and analysis, and exposure units. Note 1—(Figure 1 is deleted in the latest update. The user is refered to Master Matrix E 706 for the latest figure of the standards interconnectivity). 1.3 This practice is restri...

A Standardized Shift Handover Protocol: Improving Nurses’ Safe Practice in Intensive Care Units

Directory of Open Access Journals (Sweden)

Javad Malekzadeh

2013-08-01

Full Text Available Introduction: For maintaining the continuity of care and improving the quality of care, effective inter-shift information communication is necessary. Any handover error can endanger patient safety. Despite the importance of shift handover, there is no standard handover protocol in our healthcare settings. Methods In this one-group pretest-posttest quasi-experimental study conducted in spring and summer of 2011, we recruited a convenience sample of 56 ICU nurses. The Nurses’ Safe Practice Evaluation Checklist was used for data collection. The Content Validity Index and the inter-rater correlation coefficient of the checklist was 0.92 and 89, respectively. We employed the SPSS 11.5 software and the Mc Nemar and paired-samples t test for data analysis. Results: Study findings revealed that nurses’ mean score on the Safe Practice Evaluation Checklist increased significantly from 11.6 (2.7 to 17.0 (1.8 (P < 0.001. Conclusion: using a standard handover protocol for communicating patient’s needs and information improves nurses’ safe practice in the area of basic nursing care.

Technical bases for regulatory review; comparison of practices, standards and guides

International Nuclear Information System (INIS)

Vinck, W.; Naurer, H.; Van Reijen, G.

1979-01-01

In first place, national licensing and regulatory scenes are presentd, as well as correlations between: a) Correlations and industrial standards; b) national and international developments. The purpose of harmonisation efforts and ongoing activities, especially within the EC, are highlighted. For the purpose of being sufficiently specific, three specific areas are dealt with as examples, explaining how actual application of practices and criteria in EC Member States correlate (or not) to one another including the points of convergence and divergences: protection against aircraft crash, seismic effects, protection against fuel handling accidents. Conclusive remarks deal with the origin in and relative importance of discrepancies in safety practices and criteria. (author)

TOWARDS THE FORMULATION OF A PROPOSAL FOR OPPORTUNITY-TO-LEARN STANDARDS IN EFL LEARNING AND TEACHING

Directory of Open Access Journals (Sweden)

Rosalba Cárdenas Ramos

2011-08-01

Full Text Available This paper focuses on the need to formulate and implement a proposal for opportunity-to-learn standards (OTL in the field of language learning and teaching in Colombia, with the aim of ensuring the necessary conditions for the implementation and achievement of the performance standards, issued by the Ministry of Education as part of the National Bilingual Program in this area. First, it reviews the concept, origins, composition and models of OTL standards, and then it examines the Colombian situation to make a case for OTL in this country.

Thermal analysis of Brazilian standards proposals for social residential buildings; Avaliacao termica das propostas de normas brasileiras para edificacoes de interesse social

Energy Technology Data Exchange (ETDEWEB)

Dilkin, Pedro [Universidade Regional do Noroeste do Estado do Rio Grande do Sul, Ijui, RSA (Brazil). Dept. de Fisica, Estatistica e Matematica]. E-mail: dilkin@main.unijui.tche.br; Schneider, Paulo Smith [Rio Grande do Sul Univ., Porto Alegre, RS (Brazil). Dept. de Engenharia Mecanica]. E-mail: pss@mecanica.ufrgs.br

2000-07-01

This work presents a critical analysis of national proposals of standards for the thermal performance of simple residential buildings. A review of some international standards is performed together with the description of the national proposals of standards, and a prototype of a house is assembled, following each one of the texts. Results are displayed and the prototypes are simulated using the TRNSYS environment, concerning winter and summer periods of Porto Alegre. Finally, the national proposal that achieved the best performance is improved by means new simulations. (author)

Change in ranking order of prescribing patterns by age and sex standardization of the practice population--audit may be misleading

DEFF Research Database (Denmark)

Olesen, Frede; Vedsted, Peter; Nielsen, Jørgen Nørskov

1996-01-01

on the age, sex, and numbers of patients per practice was also obtained. The direct standardization method was used to adjust practice populations for age and sex. SETTING: The town of Randers, Aarhus County, Denmark. SUBJECTS: 35 practices, 41 GPs. MAIN OUTCOME MEASURES: Ranking of the 35 practices......OBJECTIVE: To demonstrate whether standardization of practice populations by age and sex changes the internal prescription ranking order of a group of practices. DESIGN: Data on the prescribing of cardiovascular drugs in a group of practices were obtained from a county-based database. Information...

Setting effective mandatory energy efficiency standards and labelling regulations: A review of best practices in the Asia Pacific region

International Nuclear Information System (INIS)

Shi, Xunpeng

2014-01-01

Highlights: • S and L regulations are needed to materialize the various benefits of energy efficiency. • S and L regulations can appear in various formats as in the Asia–Pacific region. • Effective regime has to be clear, authoritative, open, and enforceable. • Clear policy, customisation, inclusiveness, transparency and flexibility are desirable. - Abstract: This paper attempts to inform policy makers and legislators on how to set energy efficiency standards and labelling (S and L) regulations. It draws lessons from the literature on S and L regulations in the Asia–Pacific region and from practical experience in drafting the S and L regulations for Brunei Darussalam. The paper proposes necessary components for effective S and L regulations, as follows: clear liabilities, authoritative administration, open principles for technical systems, and enforceable mechanisms. It also recommends some key issues in good practice toward effective S and L regulations, such as policy making in advance, customised legislation, inclusive and transparent legislative procedure, and flexibility in the legislation

The Use of Leadership Standards in the Hiring Practices of Effective Principals

Science.gov (United States)

Strange, Martha A.; Hensley, Melissa A.; Kracht, Ritchie E.

2013-01-01

This is a problem based learning project focusing on superintendent use of ISSLC standards in hiring practices for human resource management. Research notes student achievement is affected by effective leadership of principals. School district superintendents charged with hiring effective principals must determine the best candidate for that…

Standard practice for analysis and interpretation of physics dosimetry results for test reactors

International Nuclear Information System (INIS)

Anon.

1984-01-01

This practice describes the methodology summarized in Annex Al to be used in the analysis and interpretation of physics-dosimetry results from test reactors. This practice relies on, and ties together, the application of several supporting ASTM standard practices, guides, and methods that are in various stages of completion (see Fig. 1). Support subject areas that are discussed include reactor physics calculations, dosimeter selection and analysis, exposure units, and neutron spectrum adjustment methods. This practice is directed towards the development and application of physics-dosimetrymetallurgical data obtained from test reactor irradiation experiments that are performed in support of the operation, licensing, and regulation of LWR nuclear power plants. It specifically addresses the physics-dosimetry aspects of the problem. Procedures related to the analysis, interpretation, and application of both test and power reactor physics-dosimetry-metallurgy results are addressed in Practice E 853, Practice E 560, Matrix E 706(IE), Practice E 185, Matrix E 706(IG), Guide E 900, and Method E 646

75 FR 6413 - Office of New Reactors; Proposed Revision to Standard Review Plan, Section 14.3.12 on Physical...

Science.gov (United States)

2010-02-09

... Standard Review Plan, Section 14.3.12 on Physical Security Hardware Inspections, Tests, Analyses, and.... SUMMARY: The NRC is soliciting public comment on NUREG-0800, ``Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants,'' on a proposed Revision 1 to Standard Review Plan (SRP...

American National Standard administrative practices for nuclear criticality safety, ANSI/ANS-8.19

International Nuclear Information System (INIS)

Smith, D.R.; Carson, R.W.

1991-01-01

American National Standard Administrative Practices for Nuclear Criticality Safety, ANSI/ANS-8.19, provides guidance for the administration of an effective program to control the risk of nuclear criticality in operations with fissile material outside reactors. The several sections of the standard address the responsibilities of management, supervisory personnel, and the criticality safety staff, as well as requirements and suggestions for the content of operating procedures, process evaluations, material control procedures, and emergency procedures

75 FR 16750 - Request for Comments on Proposed Change To Missing Parts Practice

Science.gov (United States)

2010-04-02

... conduct a search as part of the examination of the application. Any patent term adjustment (PTA) accrued... DEPARTMENT OF COMMERCE Patent and Trademark Office [Docket No.: PTO-P-2010-0029] Request for Comments on Proposed Change To Missing Parts Practice AGENCY: United States Patent and Trademark Office...

Proposed performance standards for the Agricultural Hazardous Occupations Order certification training program.

Science.gov (United States)

French, B F; Field, W E; Tormoehlen, R

2007-07-01

The performance standards that accompany Gearing Up for Safety, the agricultural production safety training curriculum for youth, were designed to meet the certification testing requirements of the Agricultural Hazardous Occupations Order (AgHOs) certification training program. The AgHOs requires that certain youth who are older than 13 and younger than 16 years of age complete a prescribed training program before being eligible for employment on farms to perform certain tasks considered hazardous. These training resources will be available for implementation and can be accessed by contacting the second author. To our knowledge, up until this time, few, if any, standardized testing procedures or instruments have had the necessary psychometric evidence to support use of the resulting scores to assess the readiness of youth to meet the basic certification requirements contained in the AgHOs. This article describes the rationale, methods, and key findings from a standard-setting session held to establish minimum passing scores for a proposed testing process. The test will be used as a component of the Gearing Up for Safety certification process for youth workers seeking employment to perform job functions as specified under the AgHOs. Readers may be able to apply this standardized testing process, or similarly accepted processes, to other or future testing and certification projects involving agricultural safety and health.

Prostate Cancer Molecular Imaging Standardized Evaluation (PROMISE): Proposed miTNM Classification for the Interpretation of PSMA-Ligand PET/CT.

Science.gov (United States)

Eiber, Matthias; Herrmann, Ken; Calais, Jeremie; Hadaschik, Boris; Giesel, Frederik L; Hartenbach, Markus; Hope, Thomas; Reiter, Robert; Maurer, Tobias; Weber, Wolfgang A; Fendler, Wolfgang P

2018-03-01

Prostate-specific membrane antigen (PSMA)-ligand PET imaging provides unprecedented accuracy for whole-body staging of prostate cancer. As PSMA-ligand PET/CT is increasingly adopted in clinical trials and routine practice worldwide, a unified language for image reporting is urgently needed. We propose a molecular imaging TNM system (miTNM, version 1.0) as a standardized reporting framework for PSMA-ligand PET/CT or PET/MRI. miTNM is designed to organize findings in comprehensible categories to promote the exchange of information among physicians and institutions. Additionally, flowcharts integrating findings of PSMA-ligand PET and morphologic imaging have been designed to guide image interpretation. Specific applications, such as assessment of prognosis or impact on management, should be evaluated in future trials. miTNM is a living framework that evolves with clinical experience and scientific data. © 2018 by the Society of Nuclear Medicine and Molecular Imaging.

Continuing education of teachers in the early years: "Good Practices Seminar" as a proposal for teacher education and integration

Directory of Open Access Journals (Sweden)

Mariana Vaitiekunas Pizarro

2017-12-01

Full Text Available There are many studies that show challenges, demands and needs in the search for improvement of teacher education. Seeking to break with the teacher's view that "always plays the same practices", the present study aimed to evaluate the placement of teachers on a proposal for training in school through socialization of pedagogical practices considered successful by teachers called "Good Seminar Practices" and to assess the extent of this situation as a proposal for continuing education. The research, qualitative, made use of semi-structured questionnaires to map the perceptions of teachers regarding this formative proposal. The results highlight the importance of qualifying the teacher do to not summarize a make devoid of purpose and criticism, valuing teachers' ideas in order to legitimize the faculty knowledge and refine their practices surpassing the understanding of teacher as mere executor of tasks.

Guide to nondestructive assay standards: Preparation criteria, availability, and practical considerations

International Nuclear Information System (INIS)

Hsue, S.T.; Stewart, J.E.; Sampson, T.E.; Butler, G.W.; Rudy, C.R.; Rinard, P.M.

1997-10-01

For certification and measurement control, nondestructive assay (NDA) instruments and methods used for verification measurements of special nuclear materials (SNMs) require calibrations based on certified reference materials (CRMs), or working reference materials (WRMs), traceable to the national system of measurements, and adequately characteristic of the unknowns. The Department of Energy Office of Safeguards and Security is sponsoring production of a comprehensive guide to preparation of NDA standards. The scope of the report includes preparation criteria, current availability of CRMs and WRMs, practical considerations for preparation and characterization, and an extensive bibliography. In preparing the report, based primarily on experience at Los Alamos, they have found that standards preparation is highly dependent on the particular NDA method being applied. They therefore include sections that contain information specific to commonly used neutron and gamma-ray NDA techniques. They also present approaches that are alternatives to, or minimize requirements for physical standards

Carbon dioxide emission standards for U.S. power plants. An efficiency analysis perspective

Energy Technology Data Exchange (ETDEWEB)

Hampf, Benjamin [Technische Univ. Darmstadt (Germany). Fachbereich Rechts- und Wirtschaftswissenschaften; Roedseth, Kenneth Loevold [Institute of Transport Economics, Oslo (Norway). Dept. of Economics and Logistics

2013-07-01

On June 25, 2013, President Obama announced his plan to introduce carbon dioxide emission standards for electricity generation. This paper proposes an efficiency analysis approach that addresses which mission rates (and standards) would be feasible if the existing generating units adopt best practices. A new efficiency measure is introduced and further decomposed to identify different sources' contributions to emission rate improvements. Estimating two Data Envelopment Analysis (DEA) models - the well-known joint production model and the new materials balance model - on a dataset consisting of 160 bituminous-fired generating units, we find that the average generating unit's electricity-to-carbon dioxide ratio is 15.3 percent below the corresponding best-practice ratio. Further examinations reveal that this discrepancy can largely be attributed to non-discretionary factors and not to managerial inefficiency. Moreover, even if the best practice ratios could be implemented, the generating units would not be able to comply with the EPA's recently proposed carbon dioxide standard.

77 FR 22564 - Proposed Collection; Comment Request; Safety Standards for Full-Size Baby Cribs and Non-Full-Size...

Science.gov (United States)

2012-04-16

... CONSUMER PRODUCT SAFETY COMMISSION [Docket No. CPSC-2012-0019] Proposed Collection; Comment Request; Safety Standards for Full- Size Baby Cribs and Non-Full-Size Baby Cribs; Compliance Form AGENCY... safety standards for full-size and non-full-size baby cribs in response to the direction under section...

Negotiating behavioural change: therapists' proposal turns in Cognitive Behavioural Therapy.

Science.gov (United States)

Ekberg, Katie; Lecouteur, Amanda

2012-01-01

Cognitive behavioural therapy (CBT) is an internationally recognised method for treating depression. However, many of the techniques involved in CBT are accomplished within the therapy interaction in diverse ways, and with varying consequences for the trajectory of therapy session. This paper uses conversation analysis to examine some standard ways in which therapists propose suggestions for behavioural change to clients attending CBT sessions for depression in Australia. Therapists' proposal turns displayed their subordinate epistemic authority over the matter at hand, and emphasised a high degree of optionality on behalf of the client in accepting their suggestions. This practice was routinely accomplished via three standard proposal turns: (1) hedged recommendations; (2) interrogatives; and (3) information-giving. These proposal turns will be examined in relation to the negotiation of behavioural change, and the implications for CBT interactions between therapist and client will be discussed.

Thinking Globally: How ISO 50001 - Energy Management can make industrial energy efficiency standard practice

Energy Technology Data Exchange (ETDEWEB)

McKane, Aimee; Desai, Deann; Matteini, Marco; Meffert, William; Williams, Robert; Risser, Roland

2009-08-01

Industry utilizes very complex systems, consisting of equipment and their human interface, which are organized to meet the production needs of the business. Effective and sustainable energy efficiency programs in an industrial setting require a systems approach to optimize the integrated whole while meeting primary business requirements. Companies that treat energy as a manageable resource and integrate their energy program into their management practices have an organizational context to continually seek opportunities for optimizing their energy use. The purpose of an energy management system standard is to provide guidance for industrial and commercial facilities to integrate energy efficiency into their management practices, including fine-tuning production processes and improving the energy efficiency of industrial systems. The International Organization for Standardization (ISO) has identified energy management as one of its top five priorities for standards development. The new ISO 50001 will establish an international framework for industrial, commercial, or institutional facilities, or entire companies, to manage their energy, including procurement and use. This standard is expected to achieve major, long-term increases in energy efficiency (20percent or more) in industrial, commercial, and institutional facilities and to reduce greenhouse gas (GHG) emissions worldwide.This paper describes the impetus for the international standard, its purpose, scope and significance, and development progress to date. A comparative overview of existing energy management standards is provided, as well as a discussion of capacity-building needs for skilled individuals to assist organizations in adopting the standard. Finally, opportunities and challenges are presented for implementing ISO 50001 in emerging economies and developing countries.

Position paper on standardization

International Nuclear Information System (INIS)

1991-04-01

The ''NPOC Strategic Plan for Building New Nuclear Plants'' creates a framework within which new standardized nuclear plants may be built. The Strategic Plan is an expression of the nuclear energy industry's serious intent to create the necessary conditions for new plant construction and operation. One of the key elements of the Strategic Plan is a comprehensive industry commitment to standardization: through design certification, combined license, first-of-a-kind engineering, construction, operation and maintenance of nuclear power plants. The NPOC plan proposes four stages of standardization in advanced light water reactors (ALWRs). The first stage is established by the ALWR Utility Requirements Document which specifies owner/operator requirements at a functional level covering all elements of plant design and construction, and many aspects of operations and maintenance. The second stage of standardization is that achieved in the NRC design certification. This certification level includes requirements, design criteria and bases, functional descriptions and performance requirements for systems to assure plant safety. The third stage of standardization, commercial standardization, carries the design to a level of completion beyond that required for design certification to enable the industry to achieve potential increases in efficiency and economy. The final stage of standardization is enhanced standardization beyond design. A standardized approach is being developed in construction practices, operating, maintenance training, and procurement practices. This comprehensive standardization program enables the NRC to proceed with design certification with the confidence that standardization beyond the regulations will be achieved. This confidence should answer the question of design detail required for design certification, and demonstrate that the NRC should require no further regulatory review beyond that required by 10 CFR Part 52

Best practice in forensic entomology--standards and guidelines.

Science.gov (United States)

Amendt, Jens; Campobasso, Carlo P; Gaudry, Emmanuel; Reiter, Christian; LeBlanc, Hélène N; Hall, Martin J R

2007-03-01

Forensic entomology, the use of insects and other arthropods in forensic investigations, is becoming increasingly more important in such investigations. To ensure its optimal use by a diverse group of professionals including pathologists, entomologists and police officers, a common frame of guidelines and standards is essential. Therefore, the European Association for Forensic Entomology has developed a protocol document for best practice in forensic entomology, which includes an overview of equipment used for collection of entomological evidence and a detailed description of the methods applied. Together with the definitions of key terms and a short introduction to the most important methods for the estimation of the minimum postmortem interval, the present paper aims to encourage a high level of competency in the field of forensic entomology.

Academy of Nutrition and Dietetics: Revised 2017 Standards of Practice and Standards of Professional Performance for Registered Dietitian Nutritionists (Competent, Proficient, and Expert) in Diabetes Care.

Science.gov (United States)

Davidson, Patricia; Ross, Tamara; Castor, Chimene

2018-05-01

There are 30.3 million people with diabetes and 86 million with prediabetes in the United States, underscoring the growing need for comprehensive diabetes care and nutrition for the management of diabetes and diabetes-related conditions. Management of diabetes is also critical for the prevention of diabetes-related complications such as cardiovascular and renal disease. The Diabetes Care and Education Dietetic Practice Group along with the Academy of Nutrition and Dietetics Quality Management Committee have updated the Standards of Practice (SOP) and Standards of Professional Performance (SOPP) for Registered Dietitian Nutritionists (RDNs) in Diabetes Care. The SOP and SOPP for RDNs in Diabetes Care provide indicators that describe three levels of practice: competent, proficient, and expert. The SOP utilizes the Nutrition Care Process and clinical workflow elements for care and management of those with diabetes and prediabetes. The SOPP describes six domains that focus on professionalism: Quality in Practice, Competence and Accountability, Provision of Services, Application of Research, Communication and Application of Knowledge, and Utilization and Management of Resources. Specific indicators outlined in the SOP and SOPP depict how these standards apply to practice. The SOP and SOPP are complementary resources for RDNs caring for individuals with diabetes or specializing in diabetes care or practicing in other diabetes-related areas, including research. The SOP and SOPP are intended to be used for RDN self-evaluation for ensuring competent practice and for determining potential education and training needs for advancement to a higher practice level in a variety of settings. Copyright © 2018 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Arts Shoved Aside: Changing Art Practices in Primary Schools since the Introduction of National Standards

Science.gov (United States)

Irwin, Michael Ray

2018-01-01

This article reports on the understandings and practices of primary teachers in implementing the arts curriculum since the 2010 introduction of National Standards in Numeracy and Literacy within the New Zealand Education system. The ever-mounting pressure on schools to perform to these standards has resulted in a reduction of emphasis and time…

International Comparisons of Foundation Phase Number Domain Mathematics Knowledge and Practice Standards

Science.gov (United States)

Human, Anja; van der Walt, Marthie; Posthuma, Barbara

2015-01-01

Poor mathematics performance in schools is both a national and an international concern. Teachers ought to be equipped with relevant subject matter knowledge and pedagogical content knowledge as one way to address this problem. However, no mathematics knowledge and practice standards have as yet been defined for the preparation of Foundation Phase…

[Reflection of estimating postmortem interval in forensic entomology and the Daubert standard].

Science.gov (United States)

Xie, Dan; Peng, Yu-Long; Guo, Ya-Dong; Cai, Ji-Feng

2013-08-01

Estimating postmortem interval (PMI) is always the emphasis and difficulty in forensic practice. Forensic entomology plays a significant indispensable role. Recently, the theories and technologies of forensic entomology are increasingly rich. But many problems remain in the research and practice. With proposing the Daubert standard, the reliability and accuracy of estimation PMI by forensic entomology need more demands. This review summarizes the application of the Daubert standard in several aspects of ecology, quantitative genetics, population genetics, molecular biology, and microbiology in the practice of forensic entomology. It builds a bridge for basic research and forensic practice to provide higher accuracy for estimating postmortem interval by forensic entomology.

Standard practice for calculation of corrosion rates and related information from electrochemical measurements

CERN Document Server

American Society for Testing and Materials. Philadelphia

1989-01-01

1.1 This practice covers the providing of guidance in converting the results of electrochemical measurements to rates of uniform corrosion. Calculation methods for converting corrosion current density values to either mass loss rates or average penetration rates are given for most engineering alloys. In addition, some guidelines for converting polarization resistance values to corrosion rates are provided. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

The Influences of Middle School Mathematics Teachers' Practical Rationality on Instructional Decision Making Regarding the Common Core State Standards for Mathematical Practices

Science.gov (United States)

Sobolewski-McMahon, Lauren M.

2017-01-01

The purpose of this study was to examine the influences of various facets of middle school mathematics teachers' practical rationality on their instructional decision making as they plan to enact the Common Core State Standards for Mathematical Practice, CCSS-MP1 (perseverance in problem solving) and CCSS-MP3 (communicating and critiquing). The…

Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation

CERN Document Server

American Society for Testing and Materials. Philadelphia

1996-01-01

1.1 This practice covers the performance of mechanical tests on materials being irradiated with charged particles. These tests are designed to simulate or provide understanding of, or both, the mechanical behavior of materials during exposure to neutron irradiation. Practices are described that govern the test material, the particle beam, the experimental technique, and the damage calculations. Reference should be made to other ASTM standards, especially Practice E 521. Procedures are described that are applicable to creep and creep rupture tests made in tension and torsion test modes. 1.2 The word simulation is used here in a broad sense to imply an approximation of the relevant neutron irradiation environment. The degree of conformity can range from poor to nearly exact. The intent is to produce a correspondence between one or more aspects of the neutron and charged particle irradiations such that fundamental relationships are established between irradiation or material parameters and the material respons...

40 CFR 63.7925 - What emissions limitations and work practice standards must I meet for closed vent systems and...

Science.gov (United States)

2010-07-01

... What emissions limitations and work practice standards must I meet for closed vent systems and control... 40 Protection of Environment 13 2010-07-01 2010-07-01 false What emissions limitations and work practice standards must I meet for closed vent systems and control devices? 63.7925 Section 63.7925...

Private animal health and welfare standards in quality assurance programmes: a review and proposed framework for critical evaluation.

Science.gov (United States)

More, S J; Hanlon, A; Marchewka, J; Boyle, L

2017-06-24

In recent years, 'private standards' in animal health and welfare have become increasingly common, and are often incorporated into quality assurance (QA) programmes. Here, we present an overview of the use of private animal health and welfare standards in QA programmes, and propose a generic framework to facilitate critical programme review. Private standards are being developed in direct response to consumer demand for QA, and offer an opportunity for product differentiation and a means to drive consumer choice. Nonetheless, a range of concerns have been raised, relating to the credibility of these standards, their potential as a discriminatory barrier to trade, the multiplicity of private standards that have been developed, the lack of consumer input and compliance costs. There is a need for greater scrutiny of private standards and of associated QA programmes. We propose a framework to clarify the primary programme goal(s) and measureable outputs relevant to animal health and welfare, the primary programme beneficiaries and to determine whether the programme is effective, efficient and transparent. This paper provides a theoretical overview, noting that this framework could be used as a tool directly for programme evaluation, or as a tool to assist with programme development and review. British Veterinary Association.

A risk standard based on societal cost with bounded consequences

International Nuclear Information System (INIS)

Worledge, D.H.

1982-01-01

A risk standard is proposed that relates the frequency of occurrence of single events to the consequences of the events. Maximum consequences and risk aversion are used to give the cumulative risk curve a shape similar to the results of a risk assessment and to bound the expectation of deaths. Societal costs in terms of deaths are used to fix the parameters of the model together with an approximate comparison with individual risks. The proposed standard is compared with some practical applications of risk assessment to nuclear reactor systems

Nanometrology, Standardization and Regulation of Nanomaterials in Brazil: A Proposal for an Analytical-Prospective Model

Directory of Open Access Journals (Sweden)

Ana Rusmerg Giménez Ledesma

2013-05-01

Full Text Available The main objective of this paper is to propose an analytical-prospective model as a tool to support decision-making processes concerning metrology, standardization and regulation of nanomaterials in Brazil, based on international references and ongoing initiatives in the world. In the context of nanotechnology development in Brazil, the motivation for carrying out this research was to identify potential benefits of metrology, standardization and regulation of nanomaterials production, from the perspective of future adoption of the model by the main stakeholders of development of these areas in Brazil. The main results can be summarized as follows: (i an overview of international studies on metrology, standardization and regulation of nanomaterials, and nanoparticles, in special; (ii the analytical-prospective model; and (iii the survey questionnaire and the roadmapping tool for metrology, standardization and regulation of nanomaterials in Brazil, based on international references and ongoing initiatives in the world.

Business transactions and standards. Towards a system of concepts and a method for early problem identification in standard implementation projects

NARCIS (Netherlands)

Rukanova, B.D.

2005-01-01

To summarize, with respect to research question one we constructed a system of concepts, while in answer to research question two we proposed a method of how to apply this system of concepts in practice in order to identify potential problems in early stages of standard implementation projects.

Standard Practice for Installation and Service of Solar Domestic Water Heating Systems for One- and Two-Family Dwellings

CERN Document Server

American Society for Testing and Materials. Philadelphia

1985-01-01

1.1 This practice provides descriptions of solar domestic water heating systems and sets forth installation and service practices in new and existing one- and two-family dwellings to help ensure adequate operation and safety., 1.2 This practice applies regardless of the fraction of heating requirement supplied by solar energy, the type of conventional fuel used in conjunction with solar, or the heat transfer fluid (or fluids) used as the energy transport medium. However, where more stringent requirements are recommended by the manufacturer, these manufacturer requirements shall prevail. 1.3 The values stated in inch-pound units are to be regarded as the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Sections 6 and 7.

Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode

CERN Document Server

American Society for Testing and Materials. Philadelphia

1995-01-01

1.1 This practice provides a procedure for the exposure of cover materials for flat-plate solar collectors to the natural weather environment at temperatures that are elevated to approximate operating conditions. 1.2 This practice is suitable for exposure of both glass and plastic solar collector cover materials. Provisions are made for exposure of single and double cover assemblies to accommodate the need for exposure of both inner and outer solar collector cover materials. 1.3 This practice does not apply to cover materials for evacuated collectors or photovoltaics. 1.4 The values stated in SI units are to be regarded as the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Ergonomic Analysis of Tricycle Sidecar Seats: Basis for Proposed Standard Design

Directory of Open Access Journals (Sweden)

Michael C. Godoy

2015-12-01

Full Text Available Ergonomics (also called human factors engineering is the study of human characteristics for the appropriate design of the living and work environment. It is applied in various industrial areas which includes transportation.Tricycle being one of the most common means of public transportation in Lipa City has various adaptations to suit the culture, and environment. The purpose of this study is to analyze the variability in design of the tricycles in Lipa City, Philippines and propose a standard ergonomically designed tricycle sidecar seat for a greater population. The study was conducted at 26 tricycle terminals with 232 tricycle samples within Lipa City proper including the public market area where 400 commuters were given questionnaires to determine the risk factors associated with the existing tricycle sidecar seat design. Anthropometric measurements of 100 males and 100 female commuters were obtained together with the sidecar dimensions of 232 tricycles to substantiate the observed variations in design. Using the design for the average and design for the extremes, it was found out that most of the tricycles in Lipa City, Philippines have inappropriate inclined seat and lowered sidecar seat pan height which can result to leg and abdominal pain; narrowed seat pan depth which caused pressure on buttocks and legs; narrowed backrest width which can cause upper and low back pain; low backrest height that can pose upper back pain; which can also result to abdominal pain; inclined backrest and limited vertical clearance which can cause upper back pain and neck pain. The researcher proposed a sidecar seat design standard which can be used by the Land Transportation Office, and Land Transportation Franchising and Regulatory Board to provide ease, comfort, and convenience to the passengers.

Some practical applications of fundamental standards in radiation protection

International Nuclear Information System (INIS)

Duhamel, Francis; Lavie, Jean-Marie

1964-05-01

After some general considerations on the recommendations made by the International Commission on Radiological Protection (ICRP) regarding standards of internal or external exposure of organs or tissues to different types of radiations, and a recall of the main problems raised by acute radio-exposures (dose assessment in case of accident, assessment of the dose due to an emergency intervention in case of accident, classification of radio-elements), this report describes how ICRP recommendations have been implemented by the CEA, and tries to relate the problem of acute radio-exposures to the problem of chronic radio-exposures. This study is limited to the case of workers and to internal contamination by inhalation, but can be easily extended to other groups or other contamination types. The authors thus recall some fundamental data and definitions regarding values recommended by the ICRP for chronic radio-exposure and for acute exposure (acceptable exposure, accidental exposure, concerted exposure, units), present and comment how standards are practically applied for dose calculation and assessment. Formulas allow a quick assessment of radiological consequences of an acute radio-exposure, or vice-versa [fr

Balance Assessment Practices and Use of Standardized Balance Measures Among Ontario Physical Therapists

Science.gov (United States)

Sibley, Kathryn M.; Straus, Sharon E.; Inness, Elizabeth L.; Salbach, Nancy M.

2011-01-01

Background Balance impairment is a significant problem for older adults, as it can influence daily functioning. Treating balance impairment in this population is a major focus of physical therapist practice. Objective The purpose of this study was to document current practices in clinical balance assessment and compare components of balance assessed and measures used across practice areas among physical therapists. Design This was a cross-sectional study. Methods A survey questionnaire was mailed to 1,000 practicing physical therapists in Ontario, Canada. Results Three hundred sixty-nine individuals completed the survey questionnaire. More than 80% of respondents reported that they regularly (more than 60% of the time) assessed postural alignment, static and dynamic stability, functional balance, and underlying motor systems. Underlying sensory systems, cognitive contributions to balance, and reactive control were regularly assessed by 59.6%, 55.0%, and 41.2% of the respondents, respectively. The standardized measures regularly used by the most respondents were the single-leg stance test (79.1%), the Berg Balance Scale (45.0%), and the Timed “Up & Go” Test (27.6%). There was considerable variation in the components of balance assessed and measures used by respondents treating individuals in the orthopedic, neurologic, geriatric, and general rehabilitation populations. Limitations The survey provides quantitative data about what is done to assess balance, but does not explain the factors influencing current practice. Conclusions Many important components of balance and standardized measures are regularly used by physical therapists to assess balance. Further research, however, is needed to understand the factors contributing to the relatively lower rates of assessing reactive control, the component of balance most directly responsible for avoiding a fall. PMID:21868613

Russian standards and design practice of ensuring NPP reliability under severe external loading conditions

Energy Technology Data Exchange (ETDEWEB)

Birbraer, A N [St. Petersburg Research and Design Institute Atomenergoproject, St. Petersburt (Russian Federation)

1993-07-01

Russian Standards and design practice of ensuring NPP reliability under severe external loading conditions are described. The main attention is paid to the seismic design requirements. Explosions, aircraft impact, and tornado are briefly examined too (author)

Russian standards and design practice of ensuring NPP reliability under severe external loading conditions

International Nuclear Information System (INIS)

Birbraer, A.N.

1993-01-01

Russian Standards and design practice of ensuring NPP reliability under severe external loading conditions are described. The main attention is paid to the seismic design requirements. Explosions, aircraft impact, and tornado are briefly examined too (author)

Irrigation Water Quality Standards for Indirect Wastewater Reuse in Agriculture: A Contribution toward Sustainable Wastewater Reuse in South Korea

Directory of Open Access Journals (Sweden)

Hanseok Jeong

2016-04-01

Full Text Available Climate change and the subsequent change in agricultural conditions increase the vulnerability of agricultural water use. Wastewater reuse is a common practice around the globe and is considered as an alternative water resource in a changing agricultural environment. Due to rapid urbanization, indirect wastewater reuse, which is the type of agricultural wastewater reuse that is predominantly practiced, will increase, and this can cause issues of unplanned reuse. Therefore, water quality standards are needed for the safe and sustainable practice of indirect wastewater reuse in agriculture. In this study, irrigation water quality criteria for wastewater reuse were discussed, and the standards and guidelines of various countries and organizations were reviewed to suggest preliminary standards for indirect wastewater reuse in South Korea. The proposed standards adopted a probabilistic consideration of practicality and classified the use of irrigation water into two categories: upland and rice paddy. The standards suggest guidelines for E. coli, electric conductivity (EC, turbidity, suspended solids (SS, biochemical oxygen demand (BOD, pH, odor, and trace elements. Through proposing the standards, this study attempts to combine features of both the conservative and liberal approaches, which in turn could suggest a new and sustainable practice of agricultural wastewater reuse.

78 FR 50358 - Notice of Intent To Prepare an Environmental Impact Statement for the Proposed Rule, Standards...

Science.gov (United States)

2013-08-19

... Escherichia. coli exceedance of the proposed standard occurred during 5 percent of the monitoring period with.../2013/5079/SIR2013-5079.pdf . Accessed July 30, 2013. Dated: August 13, 2013. Leslie Kux, Assistant...

76 FR 31381 - Office Of New Reactors; Proposed Revision 4 to Standard Review Plan; Section 8.1 on Electric...

Science.gov (United States)

2011-05-31

... Standard Review Plan; Section 8.1 on Electric Power--Introduction AGENCY: U.S. Nuclear Regulatory...,'' on a proposed Revision 4 to Standard Review Plan (SRP), Section 8.1 on ``Electric Power--Introduction,'' (Agencywide Documents Access and Management System (ADAMS) Accession No. ML111180542). The previous version of...

Standard practices for verification of displacement measuring systems and devices used in material testing machines

CERN Document Server

American Society for Testing and Materials. Philadelphia

2005-01-01

1.1 These practices cover procedures and requirements for the calibration and verification of displacement measuring systems by means of standard calibration devices for static and quasi-static testing machines. This practice is not intended to be complete purchase specifications for testing machines or displacement measuring systems. Displacement measuring systems are not intended to be used for the determination of strain. See Practice E83. 1.2 These procedures apply to the verification of the displacement measuring systems associated with the testing machine, such as a scale, dial, marked or unmarked recorder chart, digital display, etc. In all cases the buyer/owner/user must designate the displacement-measuring system(s) to be verified. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems m...

Standard practice for extreme value analysis of nonmetallic inclusions in steel and other microstructural features

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 This practice describes a methodology to statistically characterize the distribution of the largest indigenous nonmetallic inclusions in steel specimens based upon quantitative metallographic measurements. The practice is not suitable for assessing exogenous inclusions. 1.2 Based upon the statistical analysis, the nonmetallic content of different lots of steels can be compared. 1.3 This practice deals only with the recommended test methods and nothing in it should be construed as defining or establishing limits of acceptability. 1.4 The measured values are stated in SI units. For measurements obtained from light microscopy, linear feature parameters shall be reported as micrometers, and feature areas shall be reported as micrometers. 1.5 The methodology can be extended to other materials and to other microstructural features. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish app...

77 FR 24537 - Draft Standards and Best Practices for Interaction Between Medical Examiner/Coroner and Organ and...

Science.gov (United States)

2012-04-24

... Best Practices for Interaction Between Medical Examiner/Coroner and Organ and Tissue Procurement... Committee Standards and Best Practices for Interaction Between Medical Examiner/Coroner Offices and Organ... coroner/medical examiner office representatives, law enforcement agencies, organizations, and all other...

Guidelines for the Standardization of Genital Photography.

Science.gov (United States)

Joumblat, Natalie R; Chim, Jimmy; Sanchez Aguirre, Priscila Gisselle; Bedolla, Edgar; Salgado, Christopher J

2018-02-06

Plastic surgery relies on photography for both clinical practice and research. The Photographic Standards in Plastic Surgery laid the foundation for standardized photography in plastic surgery. Despite these advancements, the current literature lacks guidelines for genital photography, thus resulting in a discordance of documentation. The authors propose photographic standards for the male and female genitalia to establish homogeneity in which information can be accurately exchanged. All medical photographs include a sky-blue background, proper lighting, removal of distractors, consistent camera framing, and standard camera angles. We propose the following guidelines to standardize genital photography. In the anterior upright position, feet are shoulder-width apart and arms are placed posteriorly. The frame is bounded superiorly by the xiphoid-umbilicus midpoint and inferiorly by the patella. For circumferential documentation, frontal 180 degree capture via 45 degree intervals is often sufficient. Images in standard lithotomy position should be captured at both parallel and 45 degrees above the horizontal. Images of the phallus should include both the flaccid and erect states. Despite the increasing incidence of genital procedures, there lacks a standardized methodology in which to document the genitalia, resulting in a substantial heterogeneity in the current literature. Our standardized techniques for genital photography set forth to establish a uniform language that promotes more effective communication with both the patient as well as with colleagues. The proposed photography guidelines provide optimal visualization and standard documentation of the genitalia, allowing for accurate education, meaningful collaborations, and advancement in genital surgery. © 2018 The American Society for Aesthetic Plastic Surgery, Inc. Reprints and permission: journals.permissions@oup.com.

Canadian East Coast offshore petroleum industry safe lifting practices respecting offshore pedestal cranes, offshore containers, loose gear, other lifting devices, and operational best practices : standard practices

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-11-15

This document was developed by a working group with representatives from the petroleum industry, the Offshore Petroleum Boards and Certifying Authorities. It outlines industry best practices for operators responsible for the management, planning and execution of offshore lifting operations. Its purpose is to assist in the interpretation of applicable legislation and standards. Considered within the practice are safe design requirements, manufacture, certification, testing, maintenance and inspection requirements for pedestal cranes, offshore containers, loose gear and lifting devices. Operational best practices for lifting operations are also included along with a section that identifies additional requirements for personnel lifting operations, including personnel transfers by crane and man-riding operations. 82 refs., 2 tabs., 4 figs., 3 appendices.

77 FR 31041 - Draft Standards and Best Practices for Interaction Between Medical Examiner/Coroner and Organ and...

Science.gov (United States)

2012-05-24

... Best Practices for Interaction Between Medical Examiner/Coroner and Organ and Tissue Procurement... titled ``Organ and Tissue Procurement Committee Standards and Best Practices for Interaction Between Medical Examiner/Coroner Offices and Organ Tissue Procurement Organizations'' from May 12, 2012, to June...

Some non-scientific influences on radiation protection standards and practice

International Nuclear Information System (INIS)

Taylor, L.S.

1980-01-01

In this introductory lecture to the 5th International Congress of the IRPA, the problem of setting radiation protection standards and practice is broadly reviewed under the following headings:- 1) Biological effects of radiation, 2) Philosophy, 3) The Media, 4) Morality, (with particular reference to the problem of different classes of exposure) 5) Laws and Regulations (with particular reference to the U.S.) 6) Economics, 7) Education, 8) Credibility of scientists. It is suggested that because of their basic training in a sense of objectivity, a good argument can be made that scientists are as devoid of special interest as any other group. An argument is made that the problem of setting standards for protection can be reduced to a blending of two theories, a) that we are dealing with a single linear, no-threshold dose-effect relationship and b) the toxicological view that concentrations of a toxic substance should be set somewhat below that at which any effect could be found. (U.K.)

Inside a VAMDC data node—putting standards into practical software

Science.gov (United States)

Regandell, Samuel; Marquart, Thomas; Piskunov, Nikolai

2018-03-01

Access to molecular and atomic data is critical for many forms of remote sensing analysis across different fields. Many atomic and molecular databases are however highly specialised for their intended application, complicating querying and combination data between sources. The Virtual Atomic and Molecular Data Centre, VAMDC, is an electronic infrastructure that allows each database to register as a ‘node’. Through services such as VAMDC’s portal website, users can then access and query all nodes in a homogenised way. Today all major Atomic and Molecular databases are attached to VAMDC This article describes the software tools we developed to help data providers create and manage a VAMDC node. It gives an overview of the VAMDC infrastructure and of the various standards it uses. The article then discusses the development choices made and how the standards are implemented in practice. It concludes with a full example of implementing a VAMDC node using a real-life case as well as future plans for the node software.

75 FR 29588 - Office of New Reactors: Proposed NUREG-0800; Standard Review Plan Section 13.6.6, Draft Revision...

Science.gov (United States)

2010-05-26

...; Standard Review Plan Section 13.6.6, Draft Revision 0 on Cyber Security Plan AGENCY: Nuclear Regulatory... Plants,'' on a proposed Standard Review Plan (SRP) Section 13.6.6 on ``Cyber Security Plan'' (Agencywide Documents Access and Management System (ADAMS) Accession No. ML093560837). The Office of Nuclear Security...

Clinical balance assessment: perceptions of commonly-used standardized measures and current practices among physiotherapists in Ontario, Canada.

Science.gov (United States)

Sibley, Kathryn M; Straus, Sharon E; Inness, Elizabeth L; Salbach, Nancy M; Jaglal, Susan B

2013-03-20

Balance impairment is common in multiple clinical populations, and comprehensive assessment is important for identifying impairments, planning individualized treatment programs, and evaluating change over time. However, little information is available regarding whether clinicians who treat balance are satisfied with existing assessment tools. In 2010 we conducted a cross-sectional survey of balance assessment practices among physiotherapists in Ontario, Canada, and reported on the use of standardized balance measures (Sibley et al. 2011 Physical Therapy; 91: 1583-91). The purpose of this study was to analyse additional survey data and i) evaluate satisfaction with current balance assessment practices and standardized measures among physiotherapists who treat adult or geriatric populations with balance impairment, and ii) identify factors associated with satisfaction. The questionnaire was distributed to 1000 practicing physiotherapists. This analysis focuses on questions in which respondents were asked to rate their general perceptions about balance assessment, the perceived utility of individual standardized balance measures, whether they wanted to improve balance assessment practices, and why. Data were summarized with descriptive statistics and utility of individual measures was compared across clinical practice areas (orthopaedic, neurological, geriatric or general rehabilitation). The questionnaire was completed by 369 respondents, of which 43.4% of respondents agreed that existing standardized measures of balance meet their needs. In ratings of individual measures, the Single Leg Stance test and Berg Balance Scale were perceived as useful for clinical decision-making and evaluating change over time by over 70% of respondents, and the Timed Up-and-Go test was perceived as useful for decision-making by 56.9% of respondents and useful for evaluating change over time by 62.9% of respondents, but there were significant differences across practice groups. Seventy

Clinical Nurse Leader Integration Into Practice: Developing Theory To Guide Best Practice.

Science.gov (United States)

Bender, Miriam

2016-01-01

Numerous policy bodies have identified the clinical nurse leader (CNL) as an innovative new role for meeting higher health care quality standards. Although there is growing evidence of improved care environment and patient safety and quality outcomes after redesigning care delivery microsystems to integrate CNL practice, significant variation in CNL implementation has been noted across reports, making it difficult to causally link CNL practice to reported outcomes. This variability reflects the overall absence in the literature of a well-defined CNL theoretical framework to help guide standardized application in practice. To address this knowledge gap, an interpretive synthesis with a grounded theory analysis of CNL narratives was conducted to develop a theoretical model for CNL practice. The model clarifies CNL practice domains and proposes mechanisms by which CNL-integrated care delivery microsystems improve health care quality. The model highlights the need for a systematic approach to CNL implementation including a well-thought out strategy for care delivery redesign; a consistent, competency-based CNL workflow; and sustained macro-to-micro system leadership support. CNL practice can be considered an effective approach to organizing nursing care that maximizes the scope of nursing to influence the ways care is delivered by all professions within a clinical microsystem. Copyright © 2016 Elsevier Inc. All rights reserved.

Definition and specification for PACS. A checklist based on the standard ''IEEE Recommended Practice for Software Requirements Specifications''

International Nuclear Information System (INIS)

Koenig, H.; Klose, K.J.

1999-01-01

Problem: The formulation of requirements is necessary to control the goals of a PACS project. Furthermore, in this way, the scope of functionality necessary to support radiological working processes becomes clear. Method: Definitions of requirements and specification are formulated independently of systems according to the IEEE standard 'Recommended Practice for Software Requirements Specifications'. Definitions are given in the Request for Information, specifications in the Request for Proposal. Functional and non-functional requirements are distinguished. The solutions are rated with respect to scope, appropriateness and quality of implementation. Results: A PACS checklist was created according to the methods described above. It is published on the homepage of the 'Arbeitsgemeinschaft Informationstechnologie' (AGIT) within the 'Deutsche Roentgengesellschaft' (DRG) (http://www.uni-marburg.de/mzr.agit). Conclusion: The checklist provides a discussion forum which should contribute to an agreement on accepted basic PACS functionalities. (orig.) [de

Provenience studies using neutron activation analysis: the role of standardization

International Nuclear Information System (INIS)

Harbottle, G.

1980-01-01

This paper covers the historical background of chemical analysis of archaeological artifacts which dates back to 1790 to the first application of neutron activation analysis to archaeological ceramics and goes on to elaborate on the present day status of neutron activation analysis in provenience studies, and the role of standardization. In principle, the concentrations of elements in a neutron-activated specimen can be calculated from an exact knowledge of neutron flux, its intensity, duration and spectral (energy) distribution, plus an exact gamma ray count calibrated for efficiency, corrected for branching rates, etc. However, in practice it is far easier to compare one's unknown to a standard of known or assumed composition. The practice has been for different laboratories to use different standards. With analyses being run in the thousands throughout the world, a great benefit would be derived if analyses could be exchanged among all users and/or generators of data. The emphasis of this paper is on interlaboratory comparability of ceramic data; how far are we from it, what has been proposed in the past to achieve this goal, and what is being proposed. All of this may be summarized under the general heading of Analytical Quality Control - i.e., how to achieve precise and accurate analysis. The author proposes that anyone wishing to analyze archaeological ceramics should simply use his own standard, but attempt to calibrate that standard as nearly as possible to absolute (i.e., accurate) concentration values. The relationship of Analytical Quality Control to provenience location is also examined

Independence: proposing an initial framework for occupational therapy.

Science.gov (United States)

Collins, Bethan

2017-11-01

The concept of independence is common in occupational therapy theory and practice but has rarely been clearly defined or conceptualized within in occupational therapy literature and there seems to be no standard definition. This can result in ambiguity, which potentially jeopardizes client-centred practice. This paper proposes an occupational therapy independence framework (OTIF) that synthesizes the range of characterizations of independence in a practically useful and occupation-centred manner. A review of literature, clinical experience, doctoral research and conversations with occupational therapists and disabled people, in particular those involved in a disability activism group and people with physical disabilities, has led to the development of the OTIF. Independence and interdependence, as characterized in the OTIF, occur when an individual exerts choice over occupational performance and can engage in occupations in a manner acceptable to the individual. Interdependence results when occupations are performed with another person whereas independence involves solitary occupational performance. Dependence typically results from inability to choose occupations or a mismatch between performance capacity and environmental factors. The OTIF has the potential to clarify the conceptualization of independence within occupational therapy theory and practice. This initial proposal is presented to stimulate debate and discussion.

Views of surgery program directors on the current ACGME and proposed IOM duty-hour standards.

Science.gov (United States)

Willis, Ross E; Coverdill, James E; Mellinger, John D; Collins, J Craig; Potts, John R; Dent, Daniel L

2009-01-01

The purpose of this study was to survey the experiences of surgery program directors with the current Accreditation Council for Graduate Medical Education (ACGME) duty-hour standards and views of the Institute of Medicine (IOM) proposed duty-hour recommendations. A total of 118 program directors (47.6% of all surgery programs in the US) responded to the survey. Results showed that the current duty-hour standards have hindered clinical education opportunities by reducing or eliminating rotations on many services, didactic teaching conferences, and clinical bedside teaching opportunities. Additionally, patient safety has been compromised by frequent hand offs of care. Most IOM recommendations were perceived as extremely difficult or impossible to implement, with the exception of the moonlighting recommendation. The results indicated that adopting the IOM recommendations is not feasible given current workforce limitations, and most program directors supported maintaining the current duty-hour standards until such time as there is evidence-based outcomes research to direct change. The conclusion was that the current ACGME duty-hour standards have reduced teaching opportunities and narrowed the scope of training.

A Standards-Based Architecture Proposal for Integrating Patient mHealth Apps to Electronic Health Record Systems.

Science.gov (United States)

Marceglia, S; Fontelo, P; Rossi, E; Ackerman, M J

2015-01-01

Mobile health Applications (mHealth Apps) are opening the way to patients' responsible and active involvement with their own healthcare management. However, apart from Apps allowing patient's access to their electronic health records (EHRs), mHealth Apps are currently developed as dedicated "island systems". Although much work has been done on patient's access to EHRs, transfer of information from mHealth Apps to EHR systems is still low. This study proposes a standards-based architecture that can be adopted by mHealth Apps to exchange information with EHRs to support better quality of care. Following the definition of requirements for the EHR/mHealth App information exchange recently proposed, and after reviewing current standards, we designed the architecture for EHR/mHealth App integration. Then, as a case study, we modeled a system based on the proposed architecture aimed to support home monitoring for congestive heart failure patients. We simulated such process using, on the EHR side, OpenMRS, an open source longitudinal EHR and, on the mHealth App side, the iOS platform. The integration architecture was based on the bi-directional exchange of standard documents (clinical document architecture rel2 - CDA2). In the process, the clinician "prescribes" the home monitoring procedures by creating a CDA2 prescription in the EHR that is sent, encrypted and de-identified, to the mHealth App to create the monitoring calendar. At the scheduled time, the App alerts the patient to start the monitoring. After the measurements are done, the App generates a structured CDA2-compliant monitoring report and sends it to the EHR, thus avoiding local storage. The proposed architecture, even if validated only in a simulation environment, represents a step forward in the integration of personal mHealth Apps into the larger health-IT ecosystem, allowing the bi-directional data exchange between patients and healthcare professionals, supporting the patient's engagement in self

Standard practice for determining relative image quality response of industrial radiographic imaging systems

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 This standard provides a practice whereby industrial radiographic imaging systems may be comparatively assessed using the concept of relative image quality response (RIQR). The RIQR method presented within this practice is based upon the use of equivalent penetrameter sensitivity (EPS) described within Practice E 1025 and subsection 5.2 of this practice. Figure 1 illustrates a relative image quality indicator (RIQI) that has four different steel plaque thicknesses (.015, .010, .008, and .005 in.) sequentially positioned (from top to bottom) on a ¾-in. thick steel plate. The four plaques contain a total of 14 different arrays of penetrameter-type hole sizes designed to render varied conditions of threshold visibility ranging from 1.92 % EPS (at the top) to .94 % EPS (at the bottom) when exposed to nominal 200 keV X-ray radiation. Each “EPS” array consists of 30 identical holes; thus, providing the user with a quantity of threshold sensitivity levels suitable for relative image qualitative response com...

Guide to nondestructive assay standards: Preparation criteria, availability, and practical considerations

International Nuclear Information System (INIS)

Stewart, J.E.; Hsue, S.T.; Sampson, T.E.

1997-01-01

For certification and measurement control, nondestructive assay (NDA) instruments and methods used for verification measurement of special nuclear materials (SNMs) require calibrations based on certified reference materials (CRMs), or working reference materials (WRMs), traceable to the national system of measurements, and adequately characteristic of the unknowns. The Department of Energy Office of Safeguards and Security is sponsoring production of a comprehensive guide to preparation of NDA standards. The scope of the report includes preparation criteria, current availability of CRMs and WRMs, practical considerations for preparation and characterization, and an extensive bibliography. In preparing the report, based primarily on experience at Los Alamos, we have found that standards preparation is highly dependent on the particular NDA method being applied. We therefore include sections that contain information specific to commonly used neutron and gamma-ray NDA techniques. 16 refs., 4 figs., 2 tabs

Training Pathology Residents to Practice 21st Century Medicine: A Proposal.

Science.gov (United States)

Black-Schaffer, W Stephen; Morrow, Jon S; Prystowsky, Michael B; Steinberg, Jacob J

2016-01-01

Scientific advances, open information access, and evolving health-care economics are disrupting extant models of health-care delivery. Physicians increasingly practice as team members, accountable to payers and patients, with improved efficiency, value, and quality. This change along with a greater focus on population health affects how systems of care are structured and delivered. Pathologists are not immune to these disruptors and, in fact, may be one of the most affected medical specialties. In the coming decades, it is likely that the number of practicing pathologists will decline, requiring each pathologist to serve more and often sicker patients. The demand for increasingly sophisticated yet broader diagnostic skills will continue to grow. This will require pathologists to acquire appropriate professional training and interpersonal skills. Today's pathology training programs are ill designed to prepare such practitioners. The time to practice for most pathology trainees is typically 5 to 6 years. Yet, trainees often lack sufficient experience to practice independently and effectively. Many studies have recognized these challenges suggesting that more effective training for this new century can be implemented. Building on the strengths of existing programs, we propose a redesign of pathology residency training that will meet (and encourage) a continuing evolution of American Board of Pathology and Accreditation Council for Graduate Medical Education requirements, reduce the time to readiness for practice, and produce more effective, interactive, and adaptable pathologists. The essence of this new model is clear definition and acquisition of core knowledge and practice skills that span the anatomic and clinical pathology continuum during the first 2 years, assessed by competency-based metrics with emphasis on critical thinking and skill acquisition, followed by individualized modular training with intensively progressive responsibility during the final years of

TENORM legislation - Theory and practice

International Nuclear Information System (INIS)

Tsurikov, N.; Koperski, J.

2002-01-01

Processing of minerals often increases concentrations of naturally occurring radioactive materials (NORM) in mineral concentrates, products and waste streams. This so-called TENORM (Technologically Enhanced Naturally Occurring Radioactive Materials) phenomenon can result in usually very small increases of radiation exposures to workers and the public. However, proposed international radiation protection standards are likely to bring the TENORM issue into the realm of regulatory concern. Verbatim adoption by the national legislation's of the radiation protection standards like those proposed in the IAEA's 1996 Basic Safety Standards (BSS) would present enormous practical problems. Many industries and industrial practices would, for the first time, become subjected to the provisions of radiation protection legislation. Consequently, registration, licensing, occupational and environmental monitoring, statutory reporting, appointment of appropriately qualified staff, new approaches to the management of minerals and waste labeled as 'radioactive', etc. would be required. This would be mirrored by corresponding demands on the regulatory authorities, needing to provide an increased radiation protection regulatory control. In response to new Australian and other national radiation protection legislation that have incorporated the BSS criteria, this paper illustrates their impact on a number of industries that historically have not been considered as dealing with radioactive materials. The paper also proposes a number of initiatives that could be considered. Nationally, those initiatives should aim at adopting radiation protection legislation that is commensurate with the nature of the minerals industry operations, national circumstances, conditions and interests without compromising rational radiation protection practices. Otherwise, non-judicious application of the BSS would result in major diversions of resources from well recognized occupational health and safety issues

Drug evaluation and the permissive principle: continuities and contradictions between standards and practices in antidepressant regulation.

Science.gov (United States)

Abraham, John; Davis, Courtney

2009-08-01

Pharmaceuticals are not permitted on to the market unless they are granted regulatory approval. The regulatory process is, therefore, crucial in whether or not a drug is widely prescribed. Regulatory agencies have developed standards of performance that pharmaceuticals are supposed to meet before entering the market. Regulation of technologies is often discussed by reference to the precautionary principle. In contrast, this paper develops the concept of the 'permissive principle' as a way of understanding the departure of regulators' practices from standards of drug efficacy to which regulatory agencies themselves subscribe. By taking a case study of antidepressant regulation in the UK and the USA, the mechanisms of permissive regulatory practices are examined. An STS methodology of both spatial (international) and temporal comparisons of regulatory practices with regulatory standards is employed to identify the nature and extent of the permissive regulation. It is found that the permissive principle was adopted by drug regulators in the UK and the USA, but more so by the former than the latter. Evidently, permissive regulation, which favours the commercial interests of the drug manufacturer, but is contrary to the interests of patients, may penetrate to the heart of regulatory science. On the other hand, permissive regulation of specific drugs should not be regarded as an inevitable result of marketing strategies and concomitant networks deployed by powerful pharmaceutical companies, because the extent of permissive regulation may vary according to the intra-institutional normative commitments of regulators to uphold their technical standards against the commercial interests of the manufacturer. Likely sociological factors that can account for such permissive regulatory practices are 'corporate bias', secrecy and excessive regulatory trust in the pharmaceutical industry in the UK, political expediency and ideological capture in the USA, combined in both countries

Peculiarities of the Application of Income Tax Standards by the Subsidiary Company in the Russian Accounting Practice

Science.gov (United States)

Ermakova, Natalya A.; Gudshatullaeva, Elena M.

2016-01-01

The aim of this work is to analyze the application practice of accounting regulation provision of subsidiary company "Accounting of settlements on income tax" (AR 18/02) and correlation of methodology of formed indicators with standards of International Accounting Standards (IAS) 12 "Income taxes" at formation of the…

Learning the law: practical proposals for UK medical education.

Science.gov (United States)

Margetts, J K

2016-02-01

Ongoing serious breaches in medical professionalism might be avoided if UK doctors rethink their approach to law. UK medical education has a role in creating a climate of change by re-examining how law is taught to medical students. Adopting a more insightful approach in the UK to the impact of The Human Rights Act and learning to manipulate legal concepts, such as conflict of interest, need to be taught to medical students now if UK doctors are to manage complex decision-making in the NHS of the future. The literature is reviewed from a unique personal perspective of a doctor and lawyer, and practical proposals for developing medical education in law in the UK are suggested. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

A Practice and Value Proposal for Doctoral Dissertation Data Curation

Directory of Open Access Journals (Sweden)

W. Aaron Collie

2011-10-01

Full Text Available The preparation and publication of dissertations can be viewed as a subsystem of scholarly communication, and the treatment of data that support doctoral research can be mapped in a very controlled manner to the data curation lifecycle. Dissertation datasets represent “low-hanging fruit” for universities who are developing institutional data collections. The current workflow for processing electronic theses and dissertations (ETD at a typical American university is presented, and a new practice is proposed that includes datasets in the process of formulating, awarding, and disseminating dissertations in a way that enables them to be linked and curated together. The value proposition and new roles for the university and its student-authors, faculty, graduate programs and librarians are explored.

Standard practice for measurement of time-of-wetness on surfaces exposed to wetting conditions as in atmospheric corrosion testing

CERN Document Server

American Society for Testing and Materials. Philadelphia

1989-01-01

1.1 This practice covers a technique for monitoring time-of-wetness (TOW) on surfaces exposed to cyclic atmospheric conditions which produce depositions of moisture. 1.2 The practice is also applicable for detecting and monitoring condensation within a wall or roof assembly and in test apparatus. 1.3 Exposure site calibration or characterization can be significantly enhanced if TOW is measured for comparison with other sites, particularly if this data is used in conjunction with other site-specific instrumentation techniques. 1.4 The values stated in SI units are to be regarded as the standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

PROPOSAL METHODOLOGY OF THE SUBSYSTEM - INTERNAL STANDARDIZATION AS PART OF TQM SYSTEM

Directory of Open Access Journals (Sweden)

Elizabeta Mitreva

2012-09-01

Full Text Available Standardization in the management system becomes a key task of the managers and a priority issue for survival of every organization of this century. Besides the company's owner which is mostly concerned with the profit and fast multiplication of its invested capital, many other parties such as consumers, community, employees, deliverers and the society make a pressure in demanding. As of those demands the organization is to adapt its management system according the standards in order to be safe t hat the expectations will be fulfilled. However, to fulfill the standards in Europe and worldwide it is necessary to approach towards huge - radical changes in problem solving i.e. reengineering, new manner of consideration of causes and not as the so far known way - thinking over the consequences. Implementing this new TQM strategy means designing solidly documented quality system that covers every working process in a company and appears as a necessary base for successful usage of statistical process contr ol (SPC and efficient teamwork which otherwise in case of bad quality system will not be able to be set. In this manner it is guaranteed that the attitude of the top management is conducted; this attitude is consisted within the quality policy that create s a climate and information base whe re team work can be developed. This paper offers a proposal methodology for designing and implementation of internal standardization of TQM system in companies. This methodology is applicable in factory for reconstructio n of wagons and in a factory for confectionary production and has shown its efficiency and usage. In order to design the processes in line with the consumers/ clients content and at the same time to achieve profitability, it is necessary to reengineer the working processes

Using a standards committee to design practical procedure system improvements

International Nuclear Information System (INIS)

Grider, D.A.; Plung, D.

1993-01-01

In the post-Three Mile Island (TMI) environment, numerous reports have been issued on how to improve the quality of procedures used at government and commercial nuclear facilities. The studies tend to be long on what is wrong with existing procedures and short on practical directions on how to fix those faults. Few of these studies have been conducted by practitioners with full-time procedure-managing or procedure writing experience. None of these studies go into detail on how to improve the procedure system itself. Over the last 10 yr, various nuclear facilities within the US Department of Energy (DOE) have carried out individual programs to develop procedures that meet post-TMI standards. However, ∼2 yr ago, DOE formed a Procedures Standards Committee to advise DOE in developing a set of post-TMI guidelines that could be consistently applied throughout all DOE nuclear facilities. The committee has achieved not only its original mission by producing a series of integrated guidance documents but has also evolved a systems approach to procedures management that sets new standards for procedure quality and efficiency. As members of this committee, the authors want to describe what has made the group's approach so successful. The lessons learned may be translatable to a wide range of government and commercial industry procedure programs

Standard practice for torque calibration of testing machines and devices

CERN Document Server

American Society for Testing and Materials. Philadelphia

2009-01-01

1.1 This practice covers procedures and requirements for the calibration of torque for static and quasi-static torque capable testing machines or devices. These may, or may not, have torque indicating systems and include those devices used for the calibration of hand torque tools. Testing machines may be calibrated by one of the three following methods or combination thereof: 1.1.1 Use of standard weights and lever arms. 1.1.2 Use of elastic torque measuring devices. 1.1.3 Use of elastic force measuring devices and lever arms. 1.1.4 Any of the methods require a specific uncertainty of measurement and a traceability derived from national standards of mass and length. 1.2 The procedures of 1.1.1, 1.1.2, and 1.1.3 apply to the calibration of the torque-indicating systems associated with the testing machine, such as a scale, dial, marked or unmarked recorder chart, digital display, etc. In all cases the buyer/owner/user must designate the torque-indicating system(s) to be calibrated and included in the repor...

Constructing Meaning from Letterforms: Reflections on the Development of a Practice-Based Research Proposal

Directory of Open Access Journals (Sweden)

Phil Jones

2007-01-01

Full Text Available Research paradigms are only starting to emerge in relation to art and design practice. Consequently, research design in this domain often employs perspectives and methods developed in other disciplines. This paper traces the development of a proposal that combines theories from cognitive linguistics with graphic design practice. It describes the resulting challenges to and transformations of my long-held assumptions and understanding about graphic design and the communication process. It also outlines the way in which semantic analysis (a method from cognitive linguistics will be used in conjunction with different forms of visualisation--with visualisation used as a method to generate data for analysis as well as to present findings. Finally, it argues for an engagement by designers with conceptual metaphor theory and conceptual blending theory, as a way to facilitate reflection on design practice.

Standard practice for estimating the approximate residual circumferential stress in straight thin-walled tubing

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 A qualitative estimate of the residual circumferential stress in thin-walled tubing may be calculated from the change in outside diameter that occurs upon splitting a length of the tubing. This practice assumes a linear stress distribution through the tube wall thickness and will not provide an estimate of local stress distributions such as surface stresses. (Very high local residual stress gradients are common at the surface of metal tubing due to cold drawing, peening, grinding, etc.) The Hatfield and Thirkell formula, as later modified by Sachs and Espey, provides a simple method for calculating the approximate circumferential stress from the change in diameter of straight, thin-walled, metal tubing. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Operational Protocols in professional nursing practice: use, weaknesses and potentialities.

Science.gov (United States)

Sales, Camila Balsero; Bernardes, Andrea; Gabriel, Carmen Silvia; Brito, Maria de Fátima Paiva; Moura, André Almeida de; Zanetti, Ariane Cristina Barboza

2018-01-01

to evaluate the use of Standard Operational Protocols (SOPs) in the professional practice of the nursing team based on the theoretical framework of Donabedian, as well as to identify the weaknesses and potentialities from its implementation. Evaluative research, with quantitative approach performed with nursing professionals working in the Health Units of a city of São Paulo, composed of two stages: document analysis and subsequent application of a questionnaire to nursing professionals. A total of 247 nursing professionals participated and reported changes in the way the interventions were performed. The main weaknesses were the small number of professionals, inadequate physical structure and lack of materials. Among the potentialities were: the standardization of materials and concern of the manager and professional related to patient safety. The reassessment of SOPs is necessary, as well as the adoption of a strategy of permanent education of professionals aiming at improving the quality of care provided.

Views of Evidence-Based Practice: Social Workers' Code of Ethics and Accreditation Standards as Guides for Choice

Science.gov (United States)

Gambrill, Eileen

2007-01-01

Different views of evidence-based practice (EBP) include defining it as the use of empirically-validated treatments and practice guidelines (i.e., the EBPs approach) in contrast to the broad philosophy and related evolving process described by the originators. Social workers can draw on their code of ethics and accreditation standards both to…

U.S. National Committee proposed revision to the ISO Laser Damage Standard

Science.gov (United States)

Arenberg, Jonathan W.; Howland, Donna; Thomas, Michael; Turner, Trey; Bellum, John; Field, Ella; Carr, C. Wren; Shaffer, Gary; Brophy, Matthew; Krisiloff, Allen

2017-11-01

This paper reports on the fundamental idea behind a US National Committee, The Optics and Electro-Optics Standards Council (OEOSC) Task Force (TF) 7, proposal for a so-called Type 1 laser damage test procedure. A Type 1 test is designed to give a simple binary, pass or fail, result. Such tests are intended for the transactional type of damage testing typical of acceptance and quality control testing. As such is it intended for bulk of certification of optics for the ability to survive a given fluence, useful for manufacturers of optics and their customers, the system builders. At the root of the proposed method is the probability that an optic of area A will have R or less damage occurrences with a user specified probability P at test fluence Φ. This assessment is made by a survey of area and the observation of n events. The paper presents the derivation of probability of N or less damage sites on A given n events observed in area a. The paper concludes with the remaining steps to development of a useful test procedure based on the idea presented.

International collaborative study for the calibration of proposed International Standards for thromboplastin, rabbit, plain, and for thromboplastin, recombinant, human, plain.

Science.gov (United States)

van den Besselaar, A M H P; Chantarangkul, V; Angeloni, F; Binder, N B; Byrne, M; Dauer, R; Gudmundsdottir, B R; Jespersen, J; Kitchen, S; Legnani, C; Lindahl, T L; Manning, R A; Martinuzzo, M; Panes, O; Pengo, V; Riddell, A; Subramanian, S; Szederjesi, A; Tantanate, C; Herbel, P; Tripodi, A

2018-01-01

Essentials Two candidate International Standards for thromboplastin (coded RBT/16 and rTF/16) are proposed. International Sensitivity Index (ISI) of proposed standards was assessed in a 20-centre study. The mean ISI for RBT/16 was 1.21 with a between-centre coefficient of variation of 4.6%. The mean ISI for rTF/16 was 1.11 with a between-centre coefficient of variation of 5.7%. Background The availability of International Standards for thromboplastin is essential for the calibration of routine reagents and hence the calculation of the International Normalized Ratio (INR). Stocks of the current Fourth International Standards are running low. Candidate replacement materials have been prepared. This article describes the calibration of the proposed Fifth International Standards for thromboplastin, rabbit, plain (coded RBT/16) and for thromboplastin, recombinant, human, plain (coded rTF/16). Methods An international collaborative study was carried out for the assignment of International Sensitivity Indexes (ISIs) to the candidate materials, according to the World Health Organization (WHO) guidelines for thromboplastins and plasma used to control oral anticoagulant therapy with vitamin K antagonists. Results Results were obtained from 20 laboratories. In several cases, deviations from the ISI calibration model were observed, but the average INR deviation attributabled to the model was not greater than 10%. Only valid ISI assessments were used to calculate the mean ISI for each candidate. The mean ISI for RBT/16 was 1.21 (between-laboratory coefficient of variation [CV]: 4.6%), and the mean ISI for rTF/16 was 1.11 (between-laboratory CV: 5.7%). Conclusions The between-laboratory variation of the ISI for candidate material RBT/16 was similar to that of the Fourth International Standard (RBT/05), and the between-laboratory variation of the ISI for candidate material rTF/16 was slightly higher than that of the Fourth International Standard (rTF/09). The candidate materials

The qualitative research proposal

Directory of Open Access Journals (Sweden)

H Klopper

2008-09-01

Full Text Available Qualitative research in the health sciences has had to overcome many prejudices and a number of misunderstandings, but today qualitative research is as acceptable as quantitative research designs and is widely funded and published. Writing the proposal of a qualitative study, however, can be a challenging feat, due to the emergent nature of the qualitative research design and the description of the methodology as a process. Even today, many sub-standard proposals at post-graduate evaluation committees and application proposals to be considered for funding are still seen. This problem has led the researcher to develop a framework to guide the qualitative researcher in writing the proposal of a qualitative study based on the following research questions: (i What is the process of writing a qualitative research proposal? and (ii What does the structure and layout of a qualitative proposal look like? The purpose of this article is to discuss the process of writing the qualitative research proposal, as well as describe the structure and layout of a qualitative research proposal. The process of writing a qualitative research proposal is discussed with regards to the most important questions that need to be answered in your research proposal with consideration of the guidelines of being practical, being persuasive, making broader links, aiming for crystal clarity and planning before you write. While the structure of the qualitative research proposal is discussed with regards to the key sections of the proposal, namely the cover page, abstract, introduction, review of the literature, research problem and research questions, research purpose and objectives, research paradigm, research design, research method, ethical considerations, dissemination plan, budget and appendices.

PREMs in inflammatory arthritis: from guidelines to standard practice.

Science.gov (United States)

Palmer, Deborah; Miedany, Y El

There is now a widespread realisation that patients' views are not incidental to, but essential to, achieving high-quality care. However, despite increasing awareness of its potential value, patient experience is not routinely assessed in inflammatory arthritis patients at present. In fact, use of patient-reported experience measures (PREMs) to evaluate the patients' management and the quality of services remains a challenge. In contrast with cancer and chronic obstructive pulmonary disease (COPD), adopting a PREMs approach in inflammatory arthritis patients is difficult because of a lack of tools and approach. This article discusses how the guidelines can be translated into standard clinical practice, creating a 'therapeutic alliance' between the health professional and patients. It will also present a novel tool for use of PREMs, which can be used in routine clinical care.

Standard practice for examination of seamless, Gas-Filled, pressure vessels using acoustic emission

CERN Document Server

American Society for Testing and Materials. Philadelphia

2009-01-01

1.1 This practice provides guidelines for acoustic emission (AE) examinations of seamless pressure vessels (tubes) of the type used for distribution or storage of industrial gases. 1.2 This practice requires pressurization to a level greater than normal use. Pressurization medium may be gas or liquid. 1.3 This practice does not apply to vessels in cryogenic service. 1.4 The AE measurements are used to detect and locate emission sources. Other nondestructive test (NDT) methods must be used to evaluate the significance of AE sources. Procedures for other NDT techniques are beyond the scope of this practice. See Note 1. Note 1—Shear wave, angle beam ultrasonic examination is commonly used to establish circumferential position and dimensions of flaws that produce AE. Time of Flight Diffraction (TOFD), ultrasonic examination is also commonly used for flaw sizing. 1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standa...

Proposals for the Radioactive Substances (Basic Safety Standards) (England and Wales) Regulations 2000 and the Radioactive Substances (Basic Safety Standards) (England and Wales) Direction 2000. Consultative document

International Nuclear Information System (INIS)

2000-01-01

This document contains proposals for changes to the Radioactive Substances Act 1993 (RSA 93) and proposals for a Direction to be given to the Environment Agency in order to implement aspects of the European Directive 96/29/Euratom concerned with the control of radioactive waste. The Directive lays down basic safety standards for the protection of the health of workers and the general public against the dangers arising from ionising radiation. With the Government pledged to making government more accessible and responsive, an important feature of this approach is effective consultation with all interested organisations. This leads to more realistic and robust proposals, which is particularly important when dealing with proposed legislation. In March this year, the Government published a consultation paper 'The Radioactive Substances Act 1993: Implementing the Revised Basic Safety Standards Directive Euratom 96/29.' This sought comments on the basic principles for change - including the setting of levels of radioactivity below which radioactive material should be considered outside the framework of regulatory control. This document forms the second stage of the consultation process with the aim of gathering views on the proposed legal instruments to implement the Directive. This document: explains the background to the proposed regulations (paragraphs 8-13); summarises the results of the consultation on principles (paragraphs 14-24); describes the proposed changes (paragraphs 25-36); includes draft Regulations (paragraphs 27-29); includes a draft Direction to the Environment Agency (paragraphs 30-36); describes the next steps (paragraphs 37-39); includes a draft Regulatory Impact Assessment (paragraphs 40-41). In general, the devolved administrations in Scotland, Wales and Northern Ireland have assumed responsibility for environmental issues and hence management of radioactive waste policies and legislation affecting their respective countries. However, this

The science behind the proposed maturity standard change

Science.gov (United States)

The current maturity standard for navel oranges in California has been in place for nearly 100 years yet does not always do a good job of ensuring that consumers obtain good-tasting fruit during the early season. Early work that was performed which supported adoption of the standard may have been ad...

Solar PV O&M Standards and Best Practices - Existing Gaps and Improvement Efforts

Energy Technology Data Exchange (ETDEWEB)

Klise, Geoffrey Taylor [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Balfour, John R. [High Performance PV, Phoenix, AZ (United States); Keating, T. J. [SunSpec Alliance, San Jose, CA (United States)

2014-11-01

As greater numbers of photovoltaic (PV) systems are being installed, operations & maintenance (O&M) activities will need to be performed to ensure the PV system is operating as designed over its useful lifetime. To mitigate risks to PV system availability and performance, standardized procedures for O&M activities are needed to ensure high reliability and long-term system bankability. Efforts are just getting underway to address the need for standard O&M procedures as PV gains a larger share of U.S. generation capacity. Due to the existing landscape of how and where PV is installed, including distributed generation from small and medium PV systems, as well as large, centralized utility-scale PV, O&M activities will require different levels of expertise and reporting, making standards even more important. This report summarizes recent efforts made by solar industry stakeholders to identify the existing standards and best practices applied to solar PV O&M activities, and determine the gaps that have yet to be, or are currently being addressed by industry.

Standard practice for determining damage-Based design Stress for fiberglass reinforced plastic (FRP) materials using acoustic emission

CERN Document Server

American Society for Testing and Materials. Philadelphia

2006-01-01

1.1 This practice details procedures for establishing the direct stress and shear stress damage-based design values for use in the damage-based design criterion for materials to be used in FRP vessels and other composite structures. The practice uses data derived from acoustic emission examination of four-point beam bending tests and in-plane shear tests (see ASME Section X, Article RT-8). 1.2 The onset of lamina damage is indicated by the presence of significant acoustic emission during the reload portion of load/reload cycles. "Significant emission" is defined with historic index. 1.3 Units - The values stated in inch-pound units are to be regarded as standard. The values given in brackets are mathematical conversions to SI units which are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health pr...

An inclusive approach to raising standards in general practice: working with a 'community of practice' in Western Australia

Directory of Open Access Journals (Sweden)

Wilcox Helen

2009-02-01

Full Text Available Abstract Background In this study we explored the challenges to establishing a community of practice (CoP to address standards in general practice. We focused on the issue of improving referral letters which are the main form of communication between general practitioners (GPs and specialists. There is evidence to suggest that the information relayed to specialists at the time of referral could be improved. Methods We aimed to develop a community of practice consisting of GPs in Western Australia to improve the quality of referral letters to six specialty clinics. Three phases included: establishing the CoP, monitoring the progress of the CoP and sustaining and managing the CoP. The CoP's activity centred on referral letters to each of six selected specialties. A local measure for the quality of the referral letters was developed from a survey of participants about specific items of history and weighted for their perceived importance in the referral letter. Referral letters by participants written before and after the benchmarking exercise were scored for quality based on the standards set by the CoP. Feedback to participants regarding the 'quality' of their individual referrals was provided by a nominated member of the CoP, including a comparison of before and after scores. Results 15 GPs were recruited. Only five GPs submitted referral letters both before and after benchmarking. The five GPs that participated in both study phases submitted a total of 102 referral letters (53 before and 49 after. There was a 26 point (95% CI 11–41 improvement in the average scores of the second set of letters after taking clustering by speciality into account, indicating the quality of referral letters improved substantially after feedback. Conclusion There are many challenges to forming a CoP to focus on improving a specific issue in general practice. However we were able to demonstrate that those practitioners who participated in all aspects of the project

Standard Operational Protocols in professional nursing practice: use, weaknesses and potentialities

Directory of Open Access Journals (Sweden)

Camila Balsero Sales

Full Text Available ABSTRACT Objective: to evaluate the use of Standard Operational Protocols (SOPs in the professional practice of the nursing team based on the theoretical framework of Donabedian, as well as to identify the weaknesses and potentialities from its implementation. Method: Evaluative research, with quantitative approach performed with nursing professionals working in the Health Units of a city of São Paulo, composed of two stages: document analysis and subsequent application of a questionnaire to nursing professionals. Results: A total of 247 nursing professionals participated and reported changes in the way the interventions were performed. The main weaknesses were the small number of professionals, inadequate physical structure and lack of materials. Among the potentialities were: the standardization of materials and concern of the manager and professional related to patient safety. Conclusion: The reassessment of SOPs is necessary, as well as the adoption of a strategy of permanent education of professionals aiming at improving the quality of care provided.

INTRODUCING MEXICAN NEEDLETS FOR CMB ANALYSIS: ISSUES FOR PRACTICAL APPLICATIONS AND COMPARISON WITH STANDARD NEEDLETS

International Nuclear Information System (INIS)

Scodeller, S.; Rudjord, Oe.; Hansen, F. K.; Marinucci, D.; Geller, D.; Mayeli, A.

2011-01-01

Over the last few years, needlets have emerged as a useful tool for the analysis of cosmic microwave background (CMB) data. Our aim in this paper is first to introduce into the CMB literature a different form of needlets, known as Mexican needlets, first discussed in the mathematical literature by Geller and Mayeli. We then proceed with an extensive study of the properties of both standard and Mexican needlets; these properties depend on some parameters which can be tuned in order to optimize the performance for a given application. Our second aim in this paper is then to give practical advice on how to adjust these parameters for WMAP and Planck data in order to achieve the best properties for a given problem in CMB data analysis. In particular, we investigate localization properties in real and harmonic space and propose a recipe for quantifying the influence of galactic and point-source masks on the needlet coefficients. We also show that for certain parameter values, the Mexican needlets provide a close approximation to the Spherical Mexican Hat Wavelets (whence their name), with some advantages concerning their numerical implementation and derivation of their statistical properties.

40 CFR Table 1 to Subpart Ddddd of... - Emission Limits and Work Practice Standards

Science.gov (United States)

2010-07-01

..., and Institutional Boilers and Process Heaters Pt. 63, Subpt. DDDDD, Table 1 Table 1 to Subpart DDDDD... the following applicable emission limits and work practice standards: If your boiler or process heater.... Hydrogen Chloride 0.02 lb per MMBtu of heat input. c. Mercury 0.000003 lb per MMBtu of heat input. d...

State-of-the-art study on standards for the restoration of existing buildings; State of the Art Studie 'Standards fuer Sanierungen von Bestandsgebaeuden'. Vorbereitende Studie zum 'Energy and GHG Optimised Building Renovation' new annex proposal - Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Cypra, S.

2009-07-01

This final report for the Swiss Federal Office of Energy (SFOE) discusses the results of a preliminary study on energy and greenhouse-gas optimised building renovation. The proposals are based on the building standards proposed under the '2000-Watt Society' and 'One-Tonne CO{sub 2} Society' proposals. Comparisons are made with Swiss official building standards as well as Swiss and international standards for zero-energy and passive housing. These standards and requirements are discussed in detail and examples of buildings built to meet them are described. Building standards based on sustainability standards are also discussed and compared. The methodology to be used with respect to single-family homes and apartment blocks is discussed. Finally, knowledge gaps are identified and appropriate literature is listed.

ASEAN-USAID buildings energy conservation project. Volume 1, Energy standards: Final report

Energy Technology Data Exchange (ETDEWEB)

Levine, M.D.; Busch, J.F. [eds.][Lawrence Berkeley Lab., CA (United States); Deringer, J.J. [Deringer Group, Riva, MD (United States)

1992-06-01

Mandatory or voluntary energy-efficiency standards for new or existing buildings can play an important role in a national program aimed at promoting energy conservation. Building codes and standards can provide a degree of control over design and building practices throughout the construction process, and encourage awareness of energy-conscious design. Studies in developed countries indicate that efficiency standards can produce energy reductions on the order of 20 to 40% or more. Within ASEAN, analyses of the savings potential from the proposed standards suggest that if implemented, these standards would produce savings over current new design practice of 19% to 24%. In this volume we provide an overview of the ASEAN-USAID project aimed at promulgating standards for energy efficiency in commercial buildings. The process of developing and implementing energy-efficiency standards for buildings can be subdivided into two key components: policy development; and technical and economic analysis. Each of these involves a number of steps and processes, as outlined in Figure 1-1. This volume describes the technical and economic analyses used to develop the proposed energy efficiency standards for four countries (Malaysia, Thailand, the Philippines, and Indonesia), and to refine an energy standard existing in Singapore since 1979. Though oriented toward the ASEAN region, the analysis methods described here are applicable in a range of settings, provided appropriate modifications are made for local building construction, climatic, economic, and political conditions. Implementation issues are not specifically addressed here; rather this volume is oriented towards the analytical work needed to establish or revise an energy standard for buildings.

Standard practice for leaks using ultrasonics

CERN Document Server

American Society for Testing and Materials. Philadelphia

2011-01-01

1.1 Practice A, Pressurization—This practice covers procedures for calibration of ultrasonic instruments, location, and estimated measurements of gas leakage to atmosphere by the airborne ultrasonic technique. 1.2 In general practice this should be limited to leaks detected by two classifications of instruments, Class I and Class II. Class I instruments should have a minimum detectable leak rate of 6.7 × 10−7 mol/s (1.5 × 10−2 std. cm3/s at 0°C) or more for the pressure method of gas leakage to atmosphere. Class II instruments should have a minimal detectable leak rate of 6.7 × 10−6 mol/s (1.5 × 10−1 std. cm3/s at 0°C) or more for the pressure method of gas leakage to atmosphere. Refer to Guide E432 for additional information. 1.3 Practice B, Ultrasonic Transmitter—For object under test not capable of being pressurized but capable of having ultrasonic tone placed/injected into the test area to act as an ultrasonic leak trace source. 1.3.1 This practice is limited to leaks producing leakage o...

Air Emissions Damages from Municipal Drinking Water Treatment Under Current and Proposed Regulatory Standards.

Science.gov (United States)

Gingerich, Daniel B; Mauter, Meagan S

2017-09-19

Water treatment processes present intersectoral and cross-media risk trade-offs that are not presently considered in Safe Drinking Water Act regulatory analyses. This paper develops a method for assessing the air emission implications of common municipal water treatment processes used to comply with recently promulgated and proposed regulatory standards, including concentration limits for, lead and copper, disinfection byproducts, chromium(VI), strontium, and PFOA/PFOS. Life-cycle models of electricity and chemical consumption for individual drinking water unit processes are used to estimate embedded NO x , SO 2 , PM 2.5 , and CO 2 emissions on a cubic meter basis. We estimate air emission damages from currently installed treatment processes at U.S. drinking water facilities to be on the order of $500 million USD annually. Fully complying with six promulgated and proposed rules would increase baseline air emission damages by approximately 50%, with three-quarters of these damages originating from chemical manufacturing. Despite the magnitude of these air emission damages, the net benefit of currently implemented rules remains positive. For some proposed rules, however, the promise of net benefits remains contingent on technology choice.

Standards for Documenting Finite‐Fault Earthquake Rupture Models

KAUST Repository

Mai, Paul Martin

2016-04-06

In this article, we propose standards for documenting and disseminating finite‐fault earthquake rupture models, and related data and metadata. A comprehensive documentation of the rupture models, a detailed description of the data processing steps, and facilitating the access to the actual data that went into the earthquake source inversion are required to promote follow‐up research and to ensure interoperability, transparency, and reproducibility of the published slip‐inversion solutions. We suggest a formatting scheme that describes the kinematic rupture process in an unambiguous way to support subsequent research. We also provide guidelines on how to document the data, metadata, and data processing. The proposed standards and formats represent a first step to establishing best practices for comprehensively documenting input and output of finite‐fault earthquake source studies.

Standards for Documenting Finite‐Fault Earthquake Rupture Models

KAUST Repository

Mai, Paul Martin; Shearer, Peter; Ampuero, Jean‐Paul; Lay, Thorne

2016-01-01

In this article, we propose standards for documenting and disseminating finite‐fault earthquake rupture models, and related data and metadata. A comprehensive documentation of the rupture models, a detailed description of the data processing steps, and facilitating the access to the actual data that went into the earthquake source inversion are required to promote follow‐up research and to ensure interoperability, transparency, and reproducibility of the published slip‐inversion solutions. We suggest a formatting scheme that describes the kinematic rupture process in an unambiguous way to support subsequent research. We also provide guidelines on how to document the data, metadata, and data processing. The proposed standards and formats represent a first step to establishing best practices for comprehensively documenting input and output of finite‐fault earthquake source studies.

Consent for routine neonatal procedures: A study of practices in Irish neonatal units. How do we compare with the gold standard BAPM guidelines?

Science.gov (United States)

Ryan, M A; Ryan, C A; Dempsey, E; O'Connell, R

2017-06-09

The Irish National Consent Policy (NCP) proposes that the legal requirement for consent extends to all forms of interventions, investigations and treatment, carried out on or behalf of the Health Service Executive (HSE). This study employs a quantitative descriptive approach to investigate the practices for obtaining consent for an identified group of routine neonatal procedures in neonatal facilities throughout Ireland. The BAPM (British Association of Perinatal Medicine) guidelines were identified as 'gold standard' for the purposes of this study. The results indicated a lack of consistency between participating units pertaining to the modes of consent utilised and notable variances from 'gold standard' guidelines. Unanimity was evident for 3 procedures only (administering BCG, 6-in-1, and donor breast milk to infant). Significant findings related to EEG with video recordings, MRI/CT and gastro intestinal imaging, screening of an infant with suspected substance abuse or retinopathy of prematurity screening (ROP), administration of Vitamin K, and the carrying out of a lumbar puncture.

Medical ethical standards in dermatology: an analytical study of knowledge, attitudes and practices.

Science.gov (United States)

Mostafa, W Z; Abdel Hay, R M; El Lawindi, M I

2015-01-01

Dermatology practice has not been ethically justified at all times. The objective of the study was to find out dermatologists' knowledge about medical ethics, their attitudes towards regulatory measures and their practices, and to study the different factors influencing the knowledge, the attitude and the practices of dermatologists. This is a cross-sectional comparative study conducted among 214 dermatologists, from five Academic Universities and from participants in two conferences. A 54 items structured anonymous questionnaire was designed to describe the demographical characteristics of the study group as well as their knowledge, attitude and practices regarding the medical ethics standards in clinical and research settings. Five scoring indices were estimated regarding knowledge, attitude and practice. Inferential statistics were used to test differences between groups as indicated. The Student's t-test and analysis of variance were carried out for quantitative variables. The chi-squared test was conducted for qualitative variables. The results were considered statistically significant at a P > 0.05. Analysis of the possible factors having impact on the overall scores revealed that the highest knowledge scores were among dermatologists who practice in an academic setting plus an additional place; however, this difference was statistically non-significant (P = 0.060). Female dermatologists showed a higher attitude score compared to males (P = 0.028). The highest significant attitude score (P = 0.019) regarding clinical practice was recorded among those practicing cosmetic dermatology. The different studied groups of dermatologists revealed a significant impact on the attitude score (P = 0.049), and the evidence-practice score (P dermatology research. © 2014 European Academy of Dermatology and Venereology.

Delivery of care consistent with the psychosocial standards in pediatric cancer: Current practices in the United States.

Science.gov (United States)

Scialla, Michele A; Canter, Kimberly S; Chen, Fang Fang; Kolb, E Anders; Sandler, Eric; Wiener, Lori; Kazak, Anne E

2018-03-01

With published evidence-based Standards for Psychosocial Care for Children with Cancer and their Families, it is important to know the current status of their implementation. This paper presents data on delivery of psychosocial care related to the Standards in the United States. Pediatric oncologists, psychosocial leaders, and administrators in pediatric oncology from 144 programs completed an online survey. Participants reported on the extent to which psychosocial care consistent with the Standards was implemented and was comprehensive and state of the art. They also reported on specific practices and services for each Standard and the extent to which psychosocial care was integrated into broader medical care. Participants indicated that psychosocial care consistent with the Standards was usually or always provided at their center for most of the Standards. However, only half of the oncologists (55.6%) and psychosocial leaders (45.6%) agreed or strongly agreed that their psychosocial care was comprehensive and state of the art. Types of psychosocial care provided included evidence-based and less established approaches but were most often provided when problems were identified, rather than proactively. The perception of state of the art care was associated with practices indicative of integrated psychosocial care and the extent to which the Standards are currently implemented. Many oncologists and psychosocial leaders perceive that the delivery of psychosocial care at their center is consistent with the Standards. However, care is quite variable, with evidence for the value of more integrated models of psychosocial services. © 2017 Wiley Periodicals, Inc.

Current situation of International Organization for Standardization/Technical Committee 249 international standards of traditional Chinese medicine.

Science.gov (United States)

Liu, Yu-Qi; Wang, Yue-Xi; Shi, Nan-Nan; Han, Xue-Jie; Lu, Ai-Ping

2017-05-01

To review the current situation and progress of traditional Chinese medicine (TCM) international standards, standard projects and proposals in International Organization for Standardization (ISO)/ technical committee (TC) 249. ISO/TC 249 standards and standard projects on the ISO website were searched and new standard proposals information were collected from ISO/TC 249 National Mirror Committee in China. Then all the available data were summarized in 5 closely related items, including proposed time, proposed country, assigned working group (WG), current stage and classifification. In ISO/TC 249, there were 2 international standards, 18 standard projects and 24 new standard proposals proposed in 2014. These 44 standard subjects increased year by year since 2011. Twenty-nine of them were proposed by China, 15 were assigned to WG 4, 36 were in preliminary and preparatory stage and 8 were categorized into 4 fifields, 7 groups and sub-groups based on International Classifification Standards. A rapid and steady development of international standardization in TCM can be observed in ISO/TC 249.

Effects of the proposed EPA groundwater standards on the Uranium Mill Tailings Remedial Action Project

International Nuclear Information System (INIS)

Titus, F.B.

1988-01-01

Potential groundwater contamination beneath the 24 tailings piles that are to be stabilized under the UMTRA Project was intended in early project plans to be minimized by placing disposal piles over thick stratigraphic sequences of tight (minimally permeable) formations, and by designing covers that contained low permeability soil/clay infiltration barriers. The court-ordered revision of the UMTRA groundwater standards by EPA (proposed standards of September 1987) include very low Maximum Concentration Limits (MCLs), which are based mostly on Primary Drinking Water Standards. EPA also mandates that the designs should control radioactivity and hazardous constituents...for up to one thousand years, to the extends reasonably achievable, and, in any case, for at least two hundred years.... In order to accommodate this stipulation, transport modeling of water and contaminants in both the vadose and saturated zones beneath the piles is run until steady state conditions are reached. The early decision to locate stabilized piles over tight formations now exacerbates the problem of complying with the standards, since the contaminants percolate to groundwater that moves only slowly through strata having low permeabilities. Innovative solutions have been evaluated that are aimed at further minimizing long-term infiltration, geochemically fixing contaminants in place before they reach groundwater, or otherwise minimizing contaminant flux

UMTRA Project remedial action planning and disposal cell design to comply with the proposed EPA [Environmental Protection Agency] standards (40 CFR Part 192)

International Nuclear Information System (INIS)

1989-01-01

The Uranium Mill Tailings Remedial Action (UMTRA) Project involves stabilizing 24 inactive uranium mill tailings piles in 10 states. Remedial work must meet standards established by the US Environmental Protection Agency (EPA). Remedial action must be designed and constructed to prevent dispersion of the tailings and other contaminated materials, and must prevent the inadvertent use of the tailings by man. This report is prepared primarily for distribution to parties involved in the UMTRA Project, including the US Nuclear Regulatory Commission (NRC), and states and tribes. It is intended to record the work done by the DOE since publication of the proposed EPA groundwater protection standards, and to show how the DOE has attempted to respond and react in a positive way to the new requirements that result from the proposed standards. This report discusses the groundwater compliance strategies now being defined and implemented by the DOE, and details the changes in disposal cell designs that result from studies to evaluate ways to facilitate compliance with the proposed EPA groundwater protection standards. This report also serves to record the technical advances, planning, and progress made on the UMTRA Project since the appearance of the proposed EPA groundwater protection standards. The report serves to establish, document, and disseminate technical approaches and engineering and groundwater information to people who may be interested or involved in similar or related projects. 24 refs., 27 figs., 8 tabs

Data Citation in Neuroimaging: Proposed Best Practices for Data Identification and Attribution.

Science.gov (United States)

Honor, Leah B; Haselgrove, Christian; Frazier, Jean A; Kennedy, David N

2016-01-01

Data sharing and reuse, while widely accepted as good ideas, have been slow to catch on in any concrete and consistent way. One major hurdle within the scientific community has been the lack of widely accepted standards for citing that data, making it difficult to track usage and measure impact. Within the neuroimaging community, there is a need for a way to not only clearly identify and cite datasets, but also to derive new aggregate sets from multiple sources while clearly maintaining lines of attribution. This work presents a functional prototype of a system to integrate Digital Object Identifiers (DOI) and a standardized metadata schema into a XNAT-based repository workflow, allowing for identification of data at both the project and image level. These item and source level identifiers allow any newly defined combination of images, from any number of projects, to be tagged with a new group-level DOI that automatically inherits the individual attributes and provenance information of its constituent parts. This system enables the tracking of data reuse down to the level of individual images. The implementation of this type of data identification system would impact researchers and data creators, data hosting facilities, and data publishers, but the benefit of having widely accepted standards for data identification and attribution would go far toward making data citation practical and advantageous.

Data Citation in Neuroimaging: Proposed Best Practices for Data Identification and Attribution

Directory of Open Access Journals (Sweden)

Leah B. Honor

2016-08-01

Full Text Available Data sharing and reuse, while widely accepted as good ideas, have been slow to catch on in any concrete and consistent way. One major hurdle within the scientific community has been the lack of widely accepted standards for citing that data, making it difficult to track usage and measure impact. Within the neuroimaging community, there is a need for a way to not only clearly identify and cite datasets, but also to derive new aggregate sets from multiple sources, while clearly maintaining lines of attribution. This work presents a functional prototype of a system to integrate Digital Object Identifiers (DOI and a standardized metadata schema into a XNAT-based repository workflow, allowing for identification of data at both the project and image level. These item and source level identifiers allow any newly defined combination of images, from any number of projects, to be tagged with a new group-level DOI that automatically inherits the individual attributes and provenance information of its constituent parts. This system enables the tracking of data reuse, down to the level of individual images. The implementation of this type of data identification system would impact researchers and data creators, data hosting facilities, and data publishers, but the benefit of having widely accepted standards for data identification and attribution would go far towards making data citation practical and advantageous.

Is Your Biobank Up to Standards? A Review of the National Canadian Tissue Repository Network Required Operational Practice Standards and the Controlled Documents of a Certified Biobank.

Science.gov (United States)

Hartman, Victoria; Castillo-Pelayo, Tania; Babinszky, Sindy; Dee, Simon; Leblanc, Jodi; Matzke, Lise; O'Donoghue, Sheila; Carpenter, Jane; Carter, Candace; Rush, Amanda; Byrne, Jennifer; Barnes, Rebecca; Mes-Messons, Anne-Marie; Watson, Peter

2018-02-01

Ongoing quality management is an essential part of biobank operations and the creation of high quality biospecimen resources. Adhering to the standards of a national biobanking network is a way to reduce variability between individual biobank processes, resulting in cross biobank compatibility and more consistent support for health researchers. The Canadian Tissue Repository Network (CTRNet) implemented a set of required operational practices (ROPs) in 2011 and these serve as the standards and basis for the CTRNet biobank certification program. A review of these 13 ROPs covering 314 directives was conducted after 5 years to identify areas for revision and update, leading to changes to 7/314 directives (2.3%). A review of all internal controlled documents (including policies, standard operating procedures and guides, and forms for actions and processes) used by the BC Cancer Agency's Tumor Tissue Repository (BCCA-TTR) to conform to these ROPs was then conducted. Changes were made to 20/106 (19%) of BCCA-TTR documents. We conclude that a substantial fraction of internal controlled documents require updates at regular intervals to accommodate changes in best practices. Reviewing documentation is an essential aspect of keeping up to date with best practices and ensuring the quality of biospecimens and data managed by biobanks.

Legal and ethical standards for protecting women's human rights and the practice of conscientious objection in reproductive healthcare settings.

Science.gov (United States)

Zampas, Christina

2013-12-01

The practice of conscientious objection by healthcare workers is growing across the globe. It is most common in reproductive healthcare settings because of the religious or moral values placed on beliefs as to when life begins. It is often invoked in the context of abortion and contraceptive services, including the provision of information related to such services. Few states adequately regulate the practice, leading to denial of access to lawful reproductive healthcare services and violations of fundamental human rights. International ethical, health, and human rights standards have recently attempted to address these challenges by harmonizing the practice of conscientious objection with women's right to sexual and reproductive health services. FIGO ethical standards have had an important role in influencing human rights development in this area. They consider regulation of the unfettered use of conscientious objection essential to the realization of sexual and reproductive rights. Under international human rights law, states have a positive obligation to act in this regard. While ethical and human rights standards regarding this issue are growing, they do not yet exhaustively cover all the situations in which women's health and human rights are in jeopardy because of the practice. The present article sets forth existing ethical and human rights standards on the issue and illustrates the need for further development and clarity on balancing these rights and interests. Copyright © 2013 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

The International Standards Organisation offshore structures standard

International Nuclear Information System (INIS)

Snell, R.O.

1994-01-01

The International Standards Organisation has initiated a program to develop a suite of ISO Codes and Standards for the Oil Industry. The Offshore Structures Standard is one of seven topics being addressed. The scope of the standard will encompass fixed steel and concrete structures, floating structures, Arctic structures and the site specific assessment of mobile drilling and accommodation units. The standard will use as base documents the existing recommended practices and standards most frequently used for each type of structure, and will develop them to incorporate best published and recognized practice and knowledge where it provides a significant improvement on the base document. Work on the Code has commenced under the direction of an internationally constituted sub-committee comprising representatives from most of the countries with a substantial offshore oil and gas industry. This paper outlines the background to the code and the format, content and work program

The illusory nature of standards

DEFF Research Database (Denmark)

Linneberg, Mai Skjøtt

2011-01-01

Purpose – The purpose of this paper is to investigate the implications of the paradoxical situation in which standard setters are placed when standardising human practice. Contrary to standards, human practices are ambiguous, heterogeneous, and highly context dependent; in contrast, standards...... creation is innate in the practice of standardisation and therefore the risk of creating untrustworthy standards is prevalent for standard setters. Originality/value – The paper provides a new understanding of standards and demonstrates the need to research standardization processes in depth and bring...

Optimizing stormwater treatment practices a handbook of assessment and maintenance

CERN Document Server

Erickson, Andrew J; Gulliver, John S

2013-01-01

Optimizing Stormwater Treatment Practices: A Handbook of Assessment and Maintenance provides the information necessary for developing and operating an effective maintenance program for stormwater treatment. The book offers instructions on how to measure the level of performance of stormwater treatment practices directly and bases proposed maintenance schedules on actual performance and historical maintenance efforts and costs. The inspection methods, which are proven in the field and have been implemented successfully, are necessary as regulatory agencies are demanding evaluations of the performance of stormwater treatment practices. The authors have developed a three-tiered approach that offers readers a standard protocol for how to determine the effectiveness of stormwater treatment practices currently in place. This book also: Provides a standard protocol for how to determine the effectiveness of stormwater treatment practices Assists readers with identifying which assessment techniques to use for stormwa...

Teaching Engineering Practices

Science.gov (United States)

Cunningham, Christine M.; Carlsen, William S.

2014-03-01

Engineering is featured prominently in the Next Generation Science Standards (NGSS) and related reform documents, but how its nature and methods are described is problematic. This paper is a systematic review and critique of that representation, and proposes that the disciplinary core ideas of engineering (as described in the NGSS) can be disregarded safely if the practices of engineering are better articulated and modeled through student engagement in engineering projects. A clearer distinction between science and engineering practices is outlined, and prior research is described that suggests that precollege engineering design can strengthen children's understandings about scientific concepts. However, a piecemeal approach to teaching engineering practices is unlikely to result in students understanding engineering as a discipline. The implications for science teacher education are supplemented with lessons learned from a number of engineering education professional development projects.

Not addressing the root cause: An analysis of submissions made to the South Australian Government on a Proposal to Protect Midwifery Practice.

Science.gov (United States)

Rigg, Elizabeth; Schmied, Virginia; Peters, Kath; Dahlen, Hannah

2015-06-01

Reports of unregulated birth workers attending birth at home, with no registered midwife in attendance (freebirth), have become more frequent in Australia in recent years. A Coronial Inquiry (2012) into the deaths of three babies born at home in South Australia resulted in a call for legislation to restrict the practice of midwifery to registered midwives. A Proposal to Protect Midwifery Practice in South Australia was issued as a consultation paper in January 2013. To report the views of those making a submission to the Proposal to Protect Midwifery Practice in South Australia. Thirty submissions to the South Australian Government were downloaded, read and thematically analysed. Twenty-five (81%) submissions supported the legislation, 5 (16%) opposed it and 2 (6%) were neither for nor against. Support for the proposed legislation was strong, however the underlying root causes that have led to the rise of UBWs attending homebirth in Australia were not addressed. Recommendations called for all stakeholders to work with women to develop a better framework of care that respected and met their needs and choices whilst safeguarding maternal and neonatal health. The Proposal to Protect Midwifery Practice may promote greater protection of midwifery practice however, Private Indemnity Insurance (PII), collaborative agreements and power struggles associated with the medical domination of childbirth continue to marginalise homebirth and prevent women from accessing the care they want and need. These unresolved issues represent the root causes for UBWs attending homebirth; hence the proposal is only a partial solution. Copyright © 2014 Australian College of Midwives. Published by Elsevier Ltd. All rights reserved.

A proposal how to take into account inhomogeneous radiation fields in radiation protection

International Nuclear Information System (INIS)

Tschurlovits, M.

1996-01-01

External radiation fields exposing the human body inhomogenously are not considered neither in radiation protection standards nor in recent ICRU recommendations, but appear frequently in practical radiation protection. A proposal to solve this question is given taking into account both a conceptual and a metrological approach. The proposal suggests that a mean over an area of about 100 cm 2 can be taken as reference area for compliance with limits in terms of effective dose. (author)

Standard Practice for Use of a Lif Photo-Fluorescent Film Dosimetry System

CERN Document Server

American Society for Testing and Materials. Philadelphia

2003-01-01

1.1 This practice covers the handling, testing, and procedure for using a lithium fluoride (LiF)-based photo-fluorescent film dosimetry system to measure absorbed dose (relative to water) in materials irradiated by photons or electrons. Other alkali halides that may also exhibit photofluorescence (for example, NaCl, NaF, and KCl) are not covered in this practice. Although various alkali halides have been used for dosimetry for years utilizing thermoluminescence, the use of photoluminescence is relatively new. 1.2 This practice applies to photo-fluorescent film dosimeters (referred hereafter as photo-fluorescent dosimeters) that can be used within part or all of the following ranges: 1.2.1 Absorbed dose range of 5 10-2 to 3 102 kGy (1-3). 1.2.2 Absorbed dose rate range of 0.3 to 2 10 4 Gy/s (2-5)). 1.2.3 Radiation energy range for photons of 0.05 to 10 MeV (2). 1.2.4 Radiation energy range for electrons of 0.1 to 10 MeV (2). 1.2.5 Radiation temperature range of -20 to +60°C (6,7). 1.3 This standard doe...

Developing Practical Knowledge of the Next Generation Science Standards in Elementary Science Teacher Education

Science.gov (United States)

Hanuscin, Deborah L.; Zangori, Laura

2016-12-01

Just as the Next Generation Science Standards (NGSSs) call for change in what students learn and how they are taught, teacher education programs must reconsider courses and curriculum in order to prepare teacher candidates to understand and implement new standards. In this study, we examine the development of prospective elementary teachers' practical knowledge of the NGSS in the context of a science methods course and innovative field experience. We present three themes related to how prospective teachers viewed and utilized the standards: (a) as a useful guide for planning and designing instruction, (b) as a benchmark for student and self-evaluation, and (c) as an achievable vision for teaching and learning. Our findings emphasize the importance of collaborative opportunities for repeated teaching of the same lessons, but question what is achievable in the context of a semester-long experience.

Proposal of building a standard geodatabase for urban land use

Directory of Open Access Journals (Sweden)

Husein Haifaa

2018-01-01

Full Text Available The digital technologies represented by digital processing programs, local data bases and satellite receivers system is a set of technologies made to organize the process of building descriptive field database, and conveying them to computers, in order to store, analyze and manifest data as well as upgrade and extract it in the form of digital maps, which represent an asset in any engineering and planning study. For a variety of types of mixed land uses and others land uses in the urban city, which cause great difficulty in how to build spatial Geodatabase in terms of frequency of the land use and overlap between land uses, the paper will find the proposed standard Geomatics techniques to get rid of these difficulties. The paper will tackle the engineering and survey methods which could reinforce manifestation of uses of logical database in urban areas. Lastly, the research concludes that relying on important field survey and digital references in preparing suggested criteria for field uses, in addition to the recommendations provided in this field for the post graduate and undergraduate students as well governmental specialized departments.

The impact of preventive maintenance practices on manufacturing performance: A proposed model for SMEs in Malaysia

Science.gov (United States)

Lazim, Halim Mad; Taib, Che Azlan; Lamsali, Hendrik; Saleh, Mohamed Najib; Subramaniam, Chandrakantan

2016-08-01

Preventive maintenance (PM) plays important role to avoid or mitigate potential stoppages and disruptions of equipment or machinery from occurring in daily operations. PM emphasized total employee involvement and it is important for companies as well as Small and Medium Sized Enterprises (SMEs). SME sectors contribution to the Malaysian economy makes up 95% of the total manufacturers, however PM remain relatively lacking. The ability, reliability and effective maintenance management is highly important in order to achieve desired manufacturing performance. Therefore, organizational capability in planning, controlling, implementing and monitoring PM activities is important. Furthermore, empirical evidence on the potential impact of PM practices towards manufacturing performance with organizational capability as a moderating effect is still limited and indecisive. Henceforth, this paper aims to explore and investigate potential relationships between PM practices and manufacturing performance moderated by organizational capability in the contact of Malaysian SMEs in the manufacturing sector. Correspondently, the study intends to propose a new research framework and hypotheses to examine the abovementioned relationships. The proposed framework includes PM team, PM strategy and planned maintenance as the determinants, while organizational capability serves as the moderating variable. Manufacturing performance will be viewed in terms of innovation and financial factors. Proposed research direction and conclusion are discussed at the end of the study.

Proposed Standards for Variable Harmonization Documentation and Referencing: A Case Study Using QuickCharmStats 1.1

Science.gov (United States)

Winters, Kristi; Netscher, Sebastian

2016-01-01

Comparative statistical analyses often require data harmonization, yet the social sciences do not have clear operationalization frameworks that guide and homogenize variable coding decisions across disciplines. When faced with a need to harmonize variables researchers often look for guidance from various international studies that employ output harmonization, such as the Comparative Survey of Election Studies, which offer recoding structures for the same variable (e.g. marital status). More problematically there are no agreed documentation standards or journal requirements for reporting variable harmonization to facilitate a transparent replication process. We propose a conceptual and data-driven digital solution that creates harmonization documentation standards for publication and scholarly citation: QuickCharmStats 1.1. It is free and open-source software that allows for the organizing, documenting and publishing of data harmonization projects. QuickCharmStats starts at the conceptual level and its workflow ends with a variable recording syntax. It is therefore flexible enough to reflect a variety of theoretical justifications for variable harmonization. Using the socio-demographic variable ‘marital status’, we demonstrate how the CharmStats workflow collates metadata while being guided by the scientific standards of transparency and replication. It encourages researchers to publish their harmonization work by providing researchers who complete the peer review process a permanent identifier. Those who contribute original data harmonization work to their discipline can now be credited through citations. Finally, we propose peer-review standards for harmonization documentation, describe a route to online publishing, and provide a referencing format to cite harmonization projects. Although CharmStats products are designed for social scientists our adherence to the scientific method ensures our products can be used by researchers across the sciences. PMID

An Evaluation of Forest Road Standards and Road Gradients in Turkey in View of FAO Criteria and Some EU Practices

Directory of Open Access Journals (Sweden)

Sadık Çağlar

2009-04-01

Full Text Available Forest roads are one of the inevitable infrastructures in conducting forestry operations. Around 1000 km under standardized forest roads have been largely repaired in addition to construction of 1000 km new forest roads in Turkey. Implementing uniform road gradient along the road sections is very important in terms of transportation techniques and safety, as well as the geometrical standardizations of the forest road. In this study, current road standards, longitudinal gradient values and their limitations in forest road constructions recommended by Food and Agriculture Organization of the United Nations (FAO and some Europe Union (EU countries were examined. Firstly, the forest road standards and their gradient values have been defined in Turkish forest road construction practices. Afterwards, the forest road standards and the gradient values applied by FAO and some EU countries were presented, and finally, the specifications were examined by comparing them with the current practices in Turkish forestry.

International symposium on standards and codes of practice in medical radiation dosimetry. Book of extended synopses

International Nuclear Information System (INIS)

2002-01-01

The development of radiation measurement standards by National Metrology Institutes (NMIs) and their dissemination to Secondary Standard Dosimetry Laboratories (SSDLs), cancer therapy centres and hospitals represent essential aspects of the radiation dosimetry measurement chain. Although the demands for accuracy in radiotherapy initiated the establishment of such measurement chains, similar traceable dosimetry procedures have been implemented, or are being developed, in other areas of radiation medicine (e.g. diagnostic radiology and nuclear medicine), in radiation protection and in industrial applications of radiation. In the past few years the development of primary standards of absorbed dose to water in 60 Co for radiotherapy dosimetry has made direct calibrations in terms of absorbed dose to water available in many countries for the first time. Some laboratories have extended the development of these standards to high energy photon and electron beams and to low and medium energy x-ray beams. Other countries, however, still base their dosimetry for radiotherapy on air kerma standards. Dosimetry for conventional external beam radiotherapy was probably the field where standardized procedures adopted by medical physicists at hospitals were developed first. Those were related to exposure and air kerma standards. The recent development of Codes of Practice (or protocols) based on the concept of absorbed dose to water has led to changes in calibration procedures at hospitals. The International Code of Practice for Dosimetry Based on Standards of Absorbed Dose to Water (TRS 398) was sponsored by the International Atomic Energy Agency (IAEA), World Health Organization (WHO), Pan-American Health Organization (PAHO) and the European Society for Therapeutic Radiology and Oncology (ESTRO) and is expected to be adopted in many countries worldwide. It provides recommendations for the dosimetry of all types of beams (except neutrons) used in external radiotherapy and satisfies

International symposium on standards and codes of practice in medical radiation dosimetry. Book of extended synopses

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

The development of radiation measurement standards by National Metrology Institutes (NMIs) and their dissemination to Secondary Standard Dosimetry Laboratories (SSDLs), cancer therapy centres and hospitals represent essential aspects of the radiation dosimetry measurement chain. Although the demands for accuracy in radiotherapy initiated the establishment of such measurement chains, similar traceable dosimetry procedures have been implemented, or are being developed, in other areas of radiation medicine (e.g. diagnostic radiology and nuclear medicine), in radiation protection and in industrial applications of radiation. In the past few years the development of primary standards of absorbed dose to water in {sup 60}Co for radiotherapy dosimetry has made direct calibrations in terms of absorbed dose to water available in many countries for the first time. Some laboratories have extended the development of these standards to high energy photon and electron beams and to low and medium energy x-ray beams. Other countries, however, still base their dosimetry for radiotherapy on air kerma standards. Dosimetry for conventional external beam radiotherapy was probably the field where standardized procedures adopted by medical physicists at hospitals were developed first. Those were related to exposure and air kerma standards. The recent development of Codes of Practice (or protocols) based on the concept of absorbed dose to water has led to changes in calibration procedures at hospitals. The International Code of Practice for Dosimetry Based on Standards of Absorbed Dose to Water (TRS 398) was sponsored by the International Atomic Energy Agency (IAEA), World Health Organization (WHO), Pan-American Health Organization (PAHO) and the European Society for Therapeutic Radiology and Oncology (ESTRO) and is expected to be adopted in many countries worldwide. It provides recommendations for the dosimetry of all types of beams (except neutrons) used in external radiotherapy and

Solar PV O&M Standards and Best Practices – Existing Gaps and Improvement Efforts

Energy Technology Data Exchange (ETDEWEB)

Klise, Geoffrey Taylor [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Balfour, John R. [High Performance PV, Phoenix, AZ (United States); Keating, T. J. [SunSpec Alliance, San Jose, CA (United States)

2014-11-01

As greater numbers of photovoltaic (PV) systems are being installed, operations & maintenance (O&M) activities will need to be performed to ensure the PV system is operating as designed over its useful lifetime. To mitigate risks to PV system availability and performance, standardized procedures for O&M activities are needed to ensure high reliability and long-term system bankability. Efforts are just getting underway to address the need for standard O&M procedures as PV gains a larger share of U.S. generation capacity. Due to the existing landscape of how and where PV is installed, including distributed generation from small and medium PV systems, as well as large, centralized utility-scale PV, O&M activities will require different levels of expertise and reporting, making standards even more important. This report summarizes recent efforts made by solar industry stakeholders to identify the existing standards and best practices applied to solar PV O&M activities, and determine the gaps that have yet to be, or are currently being addressed by industry.

Evaluation of a Standardized Program for Training Practicing Anesthesiologists in Ultrasound-Guided Regional Anesthesia Skills.

Science.gov (United States)

Mariano, Edward R; Harrison, T Kyle; Kim, T Edward; Kan, Jack; Shum, Cynthia; Gaba, David M; Ganaway, Toni; Kou, Alex; Udani, Ankeet D; Howard, Steven K

2015-10-01

Practicing anesthesiologists have generally not received formal training in ultrasound-guided perineural catheter insertion. We designed this study to determine the efficacy of a standardized teaching program in this population. Anesthesiologists in practice for 10 years or more were recruited and enrolled to participate in a 1-day program: lectures and live-model ultrasound scanning (morning) and faculty-led iterative practice and mannequin-based simulation (afternoon). Participants were assessed and recorded while performing ultrasound-guided perineural catheter insertion at baseline, at midday (interval), and after the program (final). Videos were scored by 2 blinded reviewers using a composite tool and global rating scale. Participants were surveyed every 3 months for 1 year to report the number of procedures, efficacy of teaching methods, and implementation obstacles. Thirty-two participants were enrolled and completed the program; 31 of 32 (97%) completed the 1-year follow-up. Final scores [median (10th-90th percentiles)] were 21.5 (14.5-28.0) of 30 points compared to 14.0 (9.0-20.0) at interval (P < .001 versus final) and 12.0 (8.5-17.5) at baseline (P < .001 versus final), with no difference between interval and baseline. The global rating scale showed an identical pattern. Twelve of 26 participants without previous experience performed at least 1 perineural catheter insertion after training (P < .001). However, there were no differences in the monthly average number of procedures or complications after the course when compared to baseline. Practicing anesthesiologists without previous training in ultrasound-guided regional anesthesia can acquire perineural catheter insertion skills after a 1-day standardized course, but changing clinical practice remains a challenge. © 2015 by the American Institute of Ultrasound in Medicine.

Standard practice for design and use of safety alert system for hazardous work locations in the coatings and lining industry

International Nuclear Information System (INIS)

Anon.

1984-01-01

This practice covers a safety alert system for hazardous work locations and materials for the coatings and lining application industry. This practice is designed for multi-employer work sites. Limitations--This practice does not identify specific hazardous materials or work locations but provides a means for rating each. This standard may involve hazardous materials, operations, and equipment

Proposed quality control guidelines for National Committee for Clinical Laboratory Standards Susceptibility Tests using the veterinary antimicrobial agent tiamulin.

Science.gov (United States)

Pfaller, M A; Jones, R N; Walter, D H

2001-01-01

Quality control guidelines for standardized antimicrobial susceptibility test methods are critical for the continuing accuracy of these clinical tests. In this report, quality control limits were proposed for the veterinary antimicrobial agent tiamulin with minimum inhibitory concentration (MIC) ranges of three or four log(2) dilution steps in two different medium formulations. Disk diffusion zone diameter ranges were proposed for tiamulin tested against Actinobacillus pleuropneumoniae ATCC 27090 (12-18 mm) and Staphylococcus aureus ATCC 25923 (25-32 mm). The data from eight participating laboratories produced 100% of results within proposed MIC limits (8-32 microg/mL), and 95.8-97.0% of zones were found within suggested zone diameter QC guidelines. These proposed QC ranges should be validated by in-use results from veterinary clinical laboratories.

Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode

CERN Document Server

American Society for Testing and Materials. Philadelphia

1992-01-01

1.1 This practice covers a procedure for the exposure of solar collector cover materials to the natural weather environment at elevated temperatures that approximate stagnation conditions in solar collectors having a combined back and edge loss coefficient of less than 1.5 W/(m2 · °C). 1.2 This practice is suitable for exposure of both glass and plastic solar collector cover materials. Provisions are made for exposure of single and double cover assemblies to accommodate the need for exposure of both inner and outer solar collector cover materials. 1.3 This practice does not apply to cover materials for evacuated collectors, photovoltaic cells, flat-plate collectors having a combined back and edge loss coefficient greater than 1.5 W/(m2 ·° C), or flat-plate collectors whose design incorporates means for limiting temperatures during stagnation. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard t...

Proposed Rule and Related Materials for Control of Emissions of Air Pollution From Nonroad Diesel Engines Control of Air Pollution From Aircraft and Aircraft Engines; Proposed Emission Standards and Test Procedures

Science.gov (United States)

EPA is proposing to adopt emission standards and related provisions for aircraft gas turbine engines with rated thrusts greater than 26.7 kilonewtons. These engines are used primarily on commercial passenger and freight aircraft.

Scientific and Practical Commentary on Specialists’ Professional Standards in Thermal

Directory of Open Access Journals (Sweden)

M. Yu. Semenov

2016-01-01

Full Text Available The professional standards for heat treatment specialists such as "Specialist in thermal equipment installation and tests", "Specialist in analysis and diagnosis of heat treatment process systems", "Specialist in automation and mechanization of heat treatment process systems" were developed according to the Rules for the Development, Approval, and Application of Professional Standards adopted by a Decree of the Government of the Russian Federation dated 01.22.2013 № 23.The article objective is to find a way that allows directors of machine-building plants to understand the provisions of abovementioned professional standards.This commentary was developed with participation of experts, who were in charge of the professional standards.When developing the professional standards it was taken into consideration that, presently, the most promising are vacuum and ion processes of heat and thermo-chemical treatment.In this connection a new classification of the thermal equipment and manufacturing processes has been realized according to criterion of technical complexity. This classification puts the thermal equipment and manufacturing processes into simple, complex, and specifically complex.As proposed, the specifically complex thermal equipment is a multi-zone thermal one with each zone being under precise temperature control, and a vacuum or ion equipment for thermal and thermochemical treatment with integrated cooling system. The complex thermal equipment is an equipment for heat and thermochemical treatment in controlled atmosphere, and a multichamber or continuous heat treatment furnaces, as well as vacuum and ion-plasma equipment, except for specifically complex thermal equipment. The simple thermal equipment is a heat treatment one except for complex and specifically complex thermal equipment.The article gives concrete examples of simple, complex and specifically complex thermal equipment.The criteria to classify the heat treatment technological

International collaborative study for the calibration of proposed International Standards for thromboplastin, rabbit, plain and for thromboplastin, recombinant, human, plain

DEFF Research Database (Denmark)

van den Besselaar, A M H P; Chantarangkul, V; Angeloni, F

2018-01-01

BACKGROUND: The availability of International Standards for thromboplastin is essential for the calibration of routine reagents and hence the calculation of the International Normalized Ratio (INR). Stocks of the current 4(th) International Standards are running low. Candidate replacement materia......) international standard (rTF/09). The candidate materials have been accepted by WHO as the 5(th) International Standards for thromboplastin, rabbit plain, and thromboplastin, recombinant, human, plain. This article is protected by copyright. All rights reserved.......BACKGROUND: The availability of International Standards for thromboplastin is essential for the calibration of routine reagents and hence the calculation of the International Normalized Ratio (INR). Stocks of the current 4(th) International Standards are running low. Candidate replacement materials...... have been prepared. This report describes the calibration of the proposed 5(th) International Standards for thromboplastin, rabbit, plain (coded RBT/16) and for thromboplastin, recombinant, human, plain (coded rTF/16). METHODS: An international collaborative study was carried out for the assignment...

Redefining the Practice of Peer Review Through Intelligent Automation Part 1: Creation of a Standardized Methodology and Referenceable Database.

Science.gov (United States)

Reiner, Bruce I

2017-10-01

Conventional peer review practice is compromised by a number of well-documented biases, which in turn limit standard of care analysis, which is fundamental to determination of medical malpractice. In addition to these intrinsic biases, other existing deficiencies exist in current peer review including the lack of standardization, objectivity, retrospective practice, and automation. An alternative model to address these deficiencies would be one which is completely blinded to the peer reviewer, requires independent reporting from both parties, utilizes automated data mining techniques for neutral and objective report analysis, and provides data reconciliation for resolution of finding-specific report differences. If properly implemented, this peer review model could result in creation of a standardized referenceable peer review database which could further assist in customizable education, technology refinement, and implementation of real-time context and user-specific decision support.

A critical analysis of a locally agreed protocol for clinical practice

International Nuclear Information System (INIS)

Owen, A.; Hogg, P.; Nightingale, J.

2004-01-01

Within the traditional scope of radiographic practice (including advanced practice) there is a need to demonstrate effective patient care and management. Such practice should be set within a context of appropriate evidence and should also reflect peer practice. In order to achieve such practice the use of protocols is encouraged. Effective protocols can maximise care and management by minimising inter- and intra-professional variation; they can also allow for detailed procedural records to be kept in case of legal claims. However, whilst literature exists to encourage the use of protocols there is little published material available to indicate how to create, manage and archive them. This article uses an analytical approach to propose a suitable method for protocol creation and archival, it also offers suggestions on the scope and content of a protocol. To achieve this an existing clinical protocol for radiographer reporting barium enemas is analysed to draw out the general issues. Proposals for protocol creation, management, and archival were identified. The clinical practice described or inferred in the protocol should be drawn from evidence, such evidence could include peer-reviewed material, national standards and peer practice. The protocol should include an explanation of how to proceed when the radiographers reach the limit of their ability. It should refer to the initial training required to undertake the clinical duties as well as the on-going continual professional updating required to maintain competence. Audit of practice should be indicated, including the preferred audit methodology, and associated with this should be a clear statement about standards and what to do if standards are not adequately met. Protocols should be archived, in a paper-based form, for lengthy periods in case of legal claims. On the archived protocol the date it was in clinical use should be included

Revision of the recommended international general standard for irradiated foods and of the recommended international code of practice for the operation of radiation facilities used for the treatment of foods

International Nuclear Information System (INIS)

1981-11-01

In view of the findings and statements of the Joint FAO/IAEA/WHO Expert Committee on the Wholesomeness of Irradiated Food, convened in Geneva from 27 October to 3 November 1980, a Consultation Group, convened in Geneva from 1 to 3 July 1981 suggested the revision of the Recommended International General Standard for Irradiated Foods and of the Recommended International Code of Practice for the Operation of Radiation Facilities. The proposed changes are given and justified and the revised wording of the documents presented

Approaches to Increasing Ethical Compliance in China with Drug Trial Standards of Practice

DEFF Research Database (Denmark)

Rosenberg, Jacob

2016-01-01

. With recent reports of scientific misconduct from China, there is an urgent need to find approaches to compel researchers to adhere to ethical research practices. This problem does not call for a simple solution, but if forces are joined with governmental regulations, education in ethics issues for medical......Zeng et al.'s Ethics Review highlights some of the challenges associated with clinical research in China. They found that only a minority of published clinical trials of anti-dementia drugs reported that they fulfilled the basic ethical principles as outlined in the Declaration of Helsinki...... researchers, and strong reinforcement by Chinese journal editors not to publish studies with these flaws, then research ethics and publication standards will probably improve. Other solutions to foster ethical practice of drug trials are discussed including Chinese initiatives directed at managing conflict...

77 FR 71746 - Artificially Sweetened Fruit Jelly and Artificially Sweetened Fruit Preserves and Jams; Proposed...

Science.gov (United States)

2012-12-04

... product formulas or manufacturing practices in ways that would be permitted by the proposed rule, if... content claim and a standardized term. We also tentatively conclude that this action will promote honesty... electronic comments in the following way: Federal eRulemaking Portal: http://www.regulations.gov . Follow the...

Standard practice for electrolytic extraction of phases from Ni and Ni-Fe base superalloys using a hydrochloric-methanol electrolyte

CERN Document Server

American Society for Testing and Materials. Philadelphia

1995-01-01

1.1 This practice covers a procedure for the isolation of carbides, borides, TCP (topologically close-packed), and GCP (geometrically close-packed) phases (Note 1) in nickel and nickel-iron base gamma prime strengthened alloys. Contamination of the extracted residue by coarse matrix (gamma) or gamma prime particles, or both, reflects the condition of the alloy rather than the techniques mentioned in this procedure. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

A proposed radiological classification of childhood intra-thoracic tuberculosis

International Nuclear Information System (INIS)

Marais, Ben J.; Gie, Robert P.; Schaaf, H. Simon; Hesseling, Anneke C.; Donald, Peter R.; Beyers, Nulda; Starke, Jeff R.

2004-01-01

One of the obstacles in discussing childhood tuberculosis (TB) is the lack of standard descriptive terminology to classify the diverse spectrum of disease. Accurate disease classification is important, because the correct identification of the specific disease entity has definite prognostic significance. Accurate classification will also improve study outcome definitions and facilitate scientific communication. The aim of this paper is to provide practical guidelines for the accurate radiological classification of intra-thoracic TB in children less than 15 years of age. The proposed radiological classification is based on the underlying disease and the principles of pathological disease progression. The hope is that the proposed classification will clarify concepts and stimulate discussion that may lead to future consensus. (orig.)

Developing communities of practice in health care

DEFF Research Database (Denmark)

Jørgensen, Rasmus; Edwards, Kasper

Purpose Standard operating procedures (SOPs) are a part of healthcare operations but relying on explicit knowledge is not necessarily sufficient to continuously adapt and improve processes. The theory of communities of practice (CoP) proposes an approach to knowledge sharing that could supplement...... the use of SOPs. A CoP is a social community formed around a practice (e.g. ICU nursing) which induce a propensity to share experiences and thereby constitute knowledge sharing (Lave & Wenger 1991; Brown & Duguid 1991). CoP was conceived as a descriptive construct but has gained popularity and is found...

Radiological Control Technician: Standardized technician Qualification Standard

International Nuclear Information System (INIS)

1992-10-01

The Qualification Standard states and defines the knowledge and skill requirements necessary for successful completion of the Radiological Control Technician Training Program. The standard is divided into three phases: Phase I concerns RCT Academic training. There are 13 lessons associated with the core academics program and 19 lessons associated with the site academics program. The staff member should sign the appropriate blocks upon successful completion of the examination for that lesson or group of lessons. In addition, facility specific lesson plans may be added to meet the knowledge requirements in the Job Performance Measures (JPM) of the practical program. Phase II concerns RCT core/site practical (JPMs) training. There are thirteen generic tasks associated with the core practical program. Both the trainer/evaluator and student should sign the appropriate block upon successful completion of the JPM. In addition, facility specific tasks may be added or generic tasks deleted based on the results of the facility job evaluation. Phase III concerns the oral examination board successful completion of the oral examination board is documented by the signature of the chairperson of the board. Upon completion of all of the standardized technician qualification requirements, final qualification is verified by the student and the manager of the Radiological Control Department and acknowledged by signatures on the qualification standard. The completed Qualification Standard shall be maintained as an official training record

Standard practice for qualification of journeyman painters for application of coatings to steel surfaces of safety-related areas in nuclear facilities

International Nuclear Information System (INIS)

Anon.

1984-01-01

This practice provides a standard qualifying method for journeyman painters to verify their proficiency and ability to attain the required quality for application of specified coatings to steel surfaces in safety-related areas in a nuclear facility. Variations or simplifications of the practice set forth herein may be appropriate for special coating work such as maintenance or qualifications of equipment suppliers shop personnel. It is not the intent of this practice to mandate a singular basis for all qualifications. Evaluation of the journeyman painter being qualified in accordance with this practice, shall be by qualified agents as specified in 4.1. Reports shall be prepared as specified in Section 5, and certification as specified in Section 6. It is the intent of this practice to judge only the ability of the journeyman painter to apply specified coatings with the proper tools and equipment. This standard may involve hazardous materials, operations, and equipment

Incorporating the Common Core's Problem Solving Standard for Mathematical Practice into an Early Elementary Inclusive Classroom

Science.gov (United States)

Fletcher, Nicole

2014-01-01

Mathematics curriculum designers and policy decision makers are beginning to recognize the importance of problem solving, even at the earliest stages of mathematics learning. The Common Core includes sense making and perseverance in solving problems in its standards for mathematical practice for students at all grade levels. Incorporating problem…

Proposed protocols for peripheral and renal Doppler

International Nuclear Information System (INIS)

Fonseca Portuguez, Adriana

2009-01-01

A literature review was performed in order to prepare a summary of the important concepts of Doppler and applications in peripheral vascular evaluation and renal. The normal characteristics are summarized and explained in each vascular system and diagnostic criteria of the disorders frequently encountered in practice. Requested more studies have been identified and proposed protocols and report sheets have been developed to standardize the methodology of realization of several Doppler studies. The variability between operators has been treated to reduce as much as possible and follow-up studies have provided in patients who need. (author) [es

Fundaments for creation of national radiation protection standard for nuclear gauges

International Nuclear Information System (INIS)

Ferreira, Luiz Cavalcante

2016-01-01

The present work It aims to provide fundaments for the creation of a national standard of practice, safety and responsible use of nuclear gauges in accordance with the recommendations already existing national and international. The work deals with the protection against ionizing radiation, an outline of a proposal for a standard that discriminates in its articles and paragraphs, the basic principles of a proposal for a standard that discriminates in its articles and paragraphs, the basic principles of safety and security, and some pointes that are also relevant such as the responsibilities of those involved in acquisition and nuclear gauge operation, storage, maintenance, testing and emergency situations. The result is to provide a means to limit the dose of operators and people from the public and maintain these limits within the recommended by CNEN, reducing exposure do ionizing radiation, and having greater control in operating the equipment. (author)

Quantifying relative importance: Computing standardized effects in models with binary outcomes

Science.gov (United States)

Grace, James B.; Johnson, Darren; Lefcheck, Jonathan S.; Byrnes, Jarrett E.K.

2018-01-01

Scientists commonly ask questions about the relative importances of processes, and then turn to statistical models for answers. Standardized coefficients are typically used in such situations, with the goal being to compare effects on a common scale. Traditional approaches to obtaining standardized coefficients were developed with idealized Gaussian variables in mind. When responses are binary, complications arise that impact standardization methods. In this paper, we review, evaluate, and propose new methods for standardizing coefficients from models that contain binary outcomes. We first consider the interpretability of unstandardized coefficients and then examine two main approaches to standardization. One approach, which we refer to as the Latent-Theoretical or LT method, assumes that underlying binary observations there exists a latent, continuous propensity linearly related to the coefficients. A second approach, which we refer to as the Observed-Empirical or OE method, assumes responses are purely discrete and estimates error variance empirically via reference to a classical R2 estimator. We also evaluate the standard formula for calculating standardized coefficients based on standard deviations. Criticisms of this practice have been persistent, leading us to propose an alternative formula that is based on user-defined “relevant ranges”. Finally, we implement all of the above in an open-source package for the statistical software R.

Accounting standards

NARCIS (Netherlands)

Stellinga, B.; Mügge, D.

2014-01-01

The European and global regulation of accounting standards have witnessed remarkable changes over the past twenty years. In the early 1990s, EU accounting practices were fragmented along national lines and US accounting standards were the de facto global standards. Since 2005, all EU listed

Modern proposal of methodology for retrieval of characteristic synthetic rainfall hyetographs

Science.gov (United States)

Licznar, Paweł; Burszta-Adamiak, Ewa; Łomotowski, Janusz; Stańczyk, Justyna

2017-11-01

Modern engineering workshop of designing and modelling complex drainage systems is based on hydrodynamic modelling and has a probabilistic character. Its practical application requires a change regarding rainfall models accepted at the input. Previously used artificial rainfall models of simplified form, e.g. block precipitation or Euler's type II model rainfall are no longer sufficient. It is noticeable that urgent clarification is needed as regards the methodology of standardized rainfall hyetographs that would take into consideration the specifics of local storm rainfall temporal dynamics. The aim of the paper is to present a proposal for innovative methodology for determining standardized rainfall hyetographs, based on statistical processing of the collection of actual local precipitation characteristics. Proposed methodology is based on the classification of standardized rainfall hyetographs with the use of cluster analysis. Its application is presented on the example of selected rain gauges localized in Poland. Synthetic rainfall hyetographs achieved as a final result may be used for hydrodynamic modelling of sewerage systems, including probabilistic detection of necessary capacity of retention reservoirs.

Does the Responsive Classroom Approach Affect the Use of Standards-Based Mathematics Teaching Practices?: Results from a Randomized Controlled Trial

Science.gov (United States)

Ottmar, Erin R.; Rimm-Kaufman, Sara E.; Berry, Robert Q.; Larsen, Ross A.

2013-01-01

This study highlights the connections between two facets of teachers' skills--those supporting teachers' mathematical instructional interactions and those underlying social interactions within the classroom. The impact of the Responsive Classroom (RC) approach and use of RC practices on the use of standards-based mathematics teaching practices was…

Attaining and maintaining 'best practice' in environmental management

International Nuclear Information System (INIS)

McNally, P.

1993-01-01

While environmental issues are constantly changing and becoming increasingly regulated, the key to high performance in environmental management is the application of best practice - best practicable technology of sites - specific standards, practices and procedures. The author also emphasised that the application of best practice in environmental management of mine sites is a dynamic process and that requires a combination of efficient environmental management and efficient production. Timing of application of technology and social factors are also determining factors in this process. The particular case of the Ranger uranium mine site is presented were the major environmental issues relate to water management, tailing management and rehabilitation. The management procedure used at Ranger for a research project proposal is outlined

A Proposed Data Driven Architecture for Cardiology Network Application

Directory of Open Access Journals (Sweden)

Calin Ovidiu Cenan

2010-04-01

Full Text Available The paper presents a framework for a distributed medical system meant to bring a modern approach and inhance the quality of medical services offered to chronicle patients with cardio-vascular diseases, through the latest IT&C technologies. The proposed system provides online interaction between the main actors of a medical system: patients, doctors, medical entities (e.g. hospitals, clinics and medical authorities (e.g. social services. With the aid of widely accepted medical standards, the system supplies storage for medical records and offers services for data integration between different kinds of healthcare applications and entities. The proposed ontological approach allows interchange of medical knowledge and best practices with conceptually organized patients’ records. The proposed solution allows computer assisted diagnoses and multi-criteria medical data analysis, with the possible extent of building a data warehouse for complex medical data mining.

Report from AmSECT's International Consortium for Evidence-Based Perfusion: American Society of Extracorporeal Technology Standards and Guidelines for Perfusion Practice: 2013.

Science.gov (United States)

Baker, Robert A; Bronson, Shahna L; Dickinson, Timothy A; Fitzgerald, David C; Likosky, Donald S; Mellas, Nicholas B; Shann, Kenneth G

2013-09-01

One of the roles of a professional society is to develop standards and guidelines of practice as an instrument to guide safe and effective patient care. The American Society of Extracorporeal Technology (AmSECT) first published its Essentials for Perfusion Practice, Clinical Function: Conduct of Extracorporeal Circulation in 1993. The International Consortium for Evidence-Based Perfusion (ICEBP), a committee within AmSECT, was tasked with updating this document in 2010. The aim of this report is to describe the method of development and content of AmSECT's new professional standards and guidelines. The ICEBP committee independently evaluated and provided input regarding the current "Essentials and Guidelines." Structural changes were made to the entire document, and a draft document was developed, presented, and circulated to the AmSECT Board of Directors and broader membership for comment. Informed by these reviews, a revised document was then presented to the Society for a membership vote. The final document consists of 15 areas of practice covered by 50 Standards and 38 Guidelines (see Appendix 1) with the first standard focusing on the development of institutional protocols to support their implementation and use. A majority of the membership voted to accept the document (81.2% of the voting membership accepting, 18.8% rejecting). After an audit of the balloting process by AmSECT's Ethics Committee, the results were reported to the membership and the document was officially adopted on July 24, 2013. The Standards and Guidelines will serve as a useful guide for cardiac surgical teams that wish to develop institution-specific standards and guidelines to improve the reliability, safety, and effectiveness of adult cardiopulmonary bypass. The ICEBP recognizes that the development of a Standards and Guidelines statement alone will not change care. Safe, reliable, and effective care will be best served through the development and implementation of institutional

Variation in assessment and standard setting practices across UK undergraduate medicine and the need for a benchmark.

Science.gov (United States)

MacDougall, Margaret

2015-10-31

The principal aim of this study is to provide an account of variation in UK undergraduate medical assessment styles and corresponding standard setting approaches with a view to highlighting the importance of a UK national licensing exam in recognizing a common standard. Using a secure online survey system, response data were collected during the period 13 - 30 January 2014 from selected specialists in medical education assessment, who served as representatives for their respective medical schools. Assessment styles and corresponding choices of standard setting methods vary markedly across UK medical schools. While there is considerable consensus on the application of compensatory approaches, individual schools display their own nuances through use of hybrid assessment and standard setting styles, uptake of less popular standard setting techniques and divided views on norm referencing. The extent of variation in assessment and standard setting practices across UK medical schools validates the concern that there is a lack of evidence that UK medical students achieve a common standard on graduation. A national licensing exam is therefore a viable option for benchmarking the performance of all UK undergraduate medical students.

Clinical neurofeedback: case studies, proposed mechanism, and implications for pediatric neurology practice.

Science.gov (United States)

Legarda, Stella B; McMahon, Doreen; Othmer, Siegfried; Othmer, Sue

2011-08-01

Trends in alternative medicine use by American health care consumers are rising substantially. Extensive literature exists reporting on the effectiveness of neurofeedback in the treatment of autism, closed head injury, insomnia, migraine, depression, attention deficit hyperactivity disorder, epilepsy, and posttraumatic stress disorder. We speculated that neurofeedback might serve as a therapeutic modality for patients with medically refractory neurological disorders and have begun referring patients to train with clinical neurofeedback practitioners. The modality is not always covered by insurance. Confident their child's medical and neurological needs would continue to be met, the parents of 3 children with epilepsy spectrum disorder decided to have their child train in the modality. The children's individual progress following neurofeedback are each presented here. A proposed mechanism and practice implications are discussed.

R and D proposals to improve outages operation. Methods, practices and tools

International Nuclear Information System (INIS)

Dionis, Francois

2014-01-01

This paper deals with outage operation improvement. It offers a number of tracks on the interactions between the operation activities and maintenance, with a methodological perspective and proposals concerning the Information System. On the methodological point of view, a clever plant systems modeling may allow representing the needed characteristics in order to optimize tagouts, alignment procedures and the schedule. Tools must be taken n into account for new tagout practices such as tags sharing. It is possible to take advantage of 2D drawings integrated into the information system in order to improve the data controls and to visualize operation activities. An integrated set of mobile applications should allow field operators to join the information system for a better and safer performance. (author)

Standardization work by ASTM and DIN concerning test methods for metallic materials - comparative assessment with regard for practice

International Nuclear Information System (INIS)

Gerischer, K.

1986-01-01

The article explains the significant role of ASTM and marks out basic elements of the specification system of ASTM standards. Usefulness in practice is taken as the main criterion for the subsequent comparison of ASTM or DIN activities and procedures, and results, for standardization in the field of test methods for metallic materials. The main differences are shown to exist with regard to tropicality of test standards, presentation of useful information and background knowledge, and importance attached to formal questions. ASTM standardization work is shown to be more up-to-date, contain more information, and to be less concerned with formal matters. A closer cooperation between ASTM and DIN is strongly recommended. (orig.) [de

Status analysis of Chinese standards on enclosure equipment and proposed countermeasures

International Nuclear Information System (INIS)

Wu Luping

1998-12-01

Enclosure equipment, such as glove box, tong box etc., is an important kind of equipment for nuclear industry and nuclear scientific research. The status of the establishment and implementation of Chinese standards on enclosure equipment is briefly described. Some problems and deficiency existing in these standards are pointed out. The ISO standard projects on containment enclosures as well as their present progress situations are introduced. The measure for updating Chinese standards on enclosure equipment in accordance with the principle of adopting international standards are recommended. Some issues which should be taken into account in adopting ISO standards on containment enclosures are also discussed

Standard Practice for Installation, Inspection, and Maintenance of Valve-body Pressure-relief Methods for Geothermal and Other High-Temperature Liquid Applications

CERN Document Server

American Society for Testing and Materials. Philadelphia

2003-01-01

1.1 This practice covers installation, inspection, and maintenance of valve body cavity pressure relief methods for valves used in geothermal and other high-temperature liquid service. The valve type covered by this practice is a design with an isolated body cavity such that when the valve is in either the open or closed position pressure is trapped in the isolated cavity, and there is no provision to relieve the excess pressure internally. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Harmonized technical standards in the nuclear field

International Nuclear Information System (INIS)

Carbone, Ferdinando

1976-01-01

The need was felt of harmonizing and gradually standardizing technical norms, from the well-known Anglo-Saxon type codes of practice to the equally well-known recommendations of the International Commission on Radiological Protection (ICRP). The latter provide the basis for the Euratom Directives (basic standards), which, following their adoption, were embodied in the national laws of community Member countries. ISO (International Standardization Organization) is active in the nuclear technical regulations field, in particular through its Committee ISO/TC 85 ''Nuclear Energy'' at international level and, in Italy, through the National Italian Unification Agency (UNI) and its Nuclear Unification Commission (UNICEN). At its XI plenary meeting this body, on the proposal of the Secretary-General, set up a Study Group to promote revision of the regulation in force and coordination between legislation and development of UNICEN standards, considered as a set of integrative industrial technical standards. CISDEN, the Italian Nuclear Energy Forum (FIEN) and other interested organizations have been invited to collaborate in this work. (N.E.A.)

Proposal for best practice in the use of video-EEG when psychogenic non-epileptic seizures are a possible diagnosis

Directory of Open Access Journals (Sweden)

Kimberley Whitehead

Full Text Available The gold-standard for the diagnosis of psychogenic non-epileptic seizures (PNES is capturing an attack with typical semiology and lack of epileptic ictal discharges on video-EEG. Despite the importance of this diagnostic test, lack of standardisation has resulted in a wide variety of protocols and reporting practices. The goal of this review is to provide an overview of research findings on the diagnostic video-EEG procedure, in both the adult and paediatric literature. We discuss how uncertainties about the ethical use of suggestion can be resolved, and consider what constitutes best clinical practice. We stress the importance of ictal observation and assessment and consider how diagnostically useful information is best obtained. We also discuss the optimal format of video-EEG reports; and of highlighting features with high sensitivity and specificity to reduce the risk of miscommunication. We suggest that over-interpretation of the interictal EEG, and the failure to recognise differences between typical epileptic and nonepileptic seizure manifestations are the greatest pitfalls in neurophysiological assessment of patients with PNES. Meanwhile, under-recognition of semiological pointers towards frontal lobe seizures and of the absence of epileptiform ictal EEG patterns during some epileptic seizure types (especially some seizures not associated with loss of awareness, may lead to erroneous PNES diagnoses. We propose that a standardised approach to the video-EEG examination and the subsequent written report will facilitate a clear communication of its import, improving diagnostic certainty and thereby promoting appropriate patient management. Keywords: Psychogenic nonepileptic seizures, Nonepileptic attack disorder, Suggestion, EEG

Development of a HFE program for an operating NPP: Balancing between existing design practices and human factors standards

International Nuclear Information System (INIS)

Salo, Leena; Savioja, Paula

2014-01-01

This paper describes HFE program development project conducted at a Finnish power company Fortum. The aim of developing a formal HFE program was to improve integration of human factors issues in design of technical systems and to systematically document the HFE process of the company. As Fortum has a long tradition of designing control room solutions, the starting point of the HFE program development was the existing own design practices. On the other hand, the aim was to create a program which would comply with international guidelines such as NUREG-0711. The program development was conducted by tracing the HFE design practices in an on-going I and C modernization project. This empirical work was carried out by interviews of designers and other HFE key stake holders. After the explication of the current practices, the gaps, overlaps and differences in relation to the international standards and guidelines were identified. Based on an analysis of current practices and guidelines and standards a new HFE process model was created. The design process model can be followed in modifications which concern systems with human user interfaces of any kind. The model consists of five separate phases which comply with the general engineering design process model utilized at the company. The HFE program is intended to be both a practical guide on how to take human factors issues into consideration in the design of NPP systems and also a tool for the management of HFE activities

[Learn new version of Preferred Practice Pattern to further standardize the diagnosis and treatment of amblyopia].

Science.gov (United States)

Zhao, Kanxing; Shi, Xuefeng

2014-07-01

The introduction of Preferred Practice Patterns (PPP) into China has given ophthalmologists in China more opportunities to acquaint themselves with international clinical guidelines for eye care, including its developing principles, methods and the application value. It had brought significant effects on the fast improvement of clinical eye care and standardization of diagnosis and treatment of eye diseases in China, and promoted the international academic exchanges. The 2nd Chinese version of PPPs translated by Prof. Jialiang Zhao was officially published in November, 2013. The new version of PPP for amblyopia adopted the newest standard for grading of evidence strength and recommendation assessment, and emphasizes the practicability based on evidence. New explanations of the definition of amblyopia are added according to the recent research progresses in amblyopia. The diagnostic criteria of best visual acuity for bilateral amblyopia at different ages is given with new specifications. Comprehensive and practical suggestions on the examination methods for amblyopia are provided from the qualitative assessment of visual acuity, the choice of eye chart, to the use of cycloplegic agents. In the aspect of the treatment of amblyopia, based on the findings of recent multi-central random controlled clinical trials, not only strong recommendations are provided, but also the insufficiency of evidence supporting for some choices of therapy is pointed out. The necessity of the follow-up evaluation after the cessation of the treatment of amblyopia is emphasized too. In the aspect of the prevention of amblyopia, the new amblyopia PPP points out the importance of the early-period screening of amblyopia, and that the healthcare insurance plans should cover timely screening, treatment, and monitoring for recurrence of amblyopia. This article deciphers the essential contents of the new version of Chinese PPP for amblyopia, and aims to promote the standardization of the diagnosis

A redesign of OGC Symbology Encoding standard for sharing cartography

Directory of Open Access Journals (Sweden)

Erwan Bocher

2018-01-01

Full Text Available Despite most Spatial Data Infrastructures offering service-based visualization of geospatial data, requirements are often at a very basic level leading to poor quality of maps. This is a general observation for any geospatial architecture as soon as open standards as those of the Open Geospatial Consortium (OGC are applied. To improve the situation, this paper does focus on improvements at the portrayal interoperability side by considering standardization aspects. We propose two major redesign recommendations. First to consolidate the cartographic theory at the core of the OGC Symbology Encoding standard. Secondly to build the standard in a modular way so as to be ready to be extended with upcoming future cartographic requirements. Thus, we start by defining portrayal interoperability by means of typical-use cases that frame the concept of sharing cartography. Then we bring to light the strengths and limits of the relevant open standards to consider in this context. Finally we propose a set of recommendations to overcome the limits so as to make these use cases a true reality. Even if the definition of a cartographic-oriented standard is not able to act as a complete cartographic design framework by itself, we argue that pushing forward the standardization work dedicated to cartography is a way to share and disseminate good practices and finally to improve the quality of the visualizations.

Standard practice for detection sensitivity mapping of In-Plant Walk-through metal detectors

CERN Document Server

American Society for Testing and Materials. Philadelphia

1997-01-01

1.1 This standard practice covers a procedure for determining the weakest detection path through the portal aperture and the worst-case orthogonal orientation of metallic test objects. It results in detection sensitivity maps, which model the detection zone in terms related to detection sensitivity and identify the weakest detection paths. Detection sensitivity maps support sensitivity adjustment and performance evaluation procedures (see Practices C1269 and C1309). Note 1—Unsymmetrical metal objects possessing a primary longitudinal component, such as handguns and knives, usually have one particular orientation that produces the weakest detection signal. The orientation and the path through the detector aperture where the weakest response is produced may not be the same for all test objects, even those with very similar appearance. Note 2—In the case of multiple specified test objects or for test objects that are orientation sensitive, it may be necessary to map each object several times to determine ...

Comparison between predicted duct effectiveness from proposed ASHRAE Standard 152P and measured field data for residential forced air cooling systems; TOPICAL

International Nuclear Information System (INIS)

Siegel, Jeffrey A.; McWilliams, Jennifer A.; Walker, Iain S.

2002-01-01

The proposed ASHRAE Standard 152P ''Method of Test for Determining the Design and Seasonal Efficiencies of Residential Thermal Distribution Systems'' (ASHRAE 2002) has recently completed its second public review. As part of the standard development process, this study compares the forced air distribution system ratings provided by the public review draft of Standard 152P to measured field results. 58 field tests were performed on cooling systems in 11 homes in the summers of 1998 and 1999. Seven of these houses had standard attics with insulation on the attic floor and a well-vented attic space. The other four houses had unvented attics where the insulation is placed directly under the roof deck and the attic space is not deliberately vented. Each house was tested under a range of summer weather conditions at each particular site, and in some cases the amount of duct leakage was intentionally varied. The comparison between 152P predicted efficiencies and the measured results includes evaluation of the effects of weather, duct location, thermal conditions, duct leakage, and system capacity. The results showed that the difference between measured delivery effectiveness and that calculated using proposed Standard 152P is about 5 percentage points if weather data, duct leakage and air handler flow are well known. However, the accuracy of the standard is strongly dependent on having good measurements of duct leakage and system airflow. Given that the uncertainty in the measured delivery effectiveness is typically also about 5 percentage points, the Standard 152P results are acceptably close to the measured data

Practice and problems in radiation protection in medical institutions in Papua New Guinea

International Nuclear Information System (INIS)

Patel, I.C.

1984-01-01

Sources of ionizing radiations employed in medical centres in Papua New Guinea are outlined and the present practice in radiation protection is discussed. Steps being taken or proposed to improve the standard of radiological protection are also considered

Leveraging Standards to Promote Program Quality

Science.gov (United States)

Young, Michelle D.; Mawhinney, Hanna; Reed, Cynthia J.

2016-01-01

Standards provide a foundation for thinking about leadership development and practice. This article explores three sets of standards that impact educational leadership preparation: (a) the recently revised Interstate School Leaders Licensure Consortium (ISLLC) standards, which are now known as the Practice Standards for Educational Leaders (PSEL);…

78 FR 10005 - National Emission Standards for Hazardous Air Pollutants for the Portland Cement Manufacturing...

Science.gov (United States)

2013-02-12

.... Open Clinker Storage Piles IV. Summary of Major Changes Since Proposal A. PM Parametric Monitoring B. Scaling for Continuous Parametric Monitoring of THC for Alternative OHAP Standard C. Work Practice... parametric monitoring system D/F dioxins and furans EPA Environmental Protection Agency ESP Electrostatic...

Construction and equipment requirements for installations and laboratories handling unsealed radioactive materials in low and medium activity - Proposal of an Israeli standard

Energy Technology Data Exchange (ETDEWEB)

Ben-Shlomo, A; Schlesinger, T; Barshad, M [Soreq Nuclear Research Center, Yavne (Israel)

1993-10-01

Working with unsealed radioactive materials involves risks of internal or external exposure to ionizing radiation. Exposure of human beings to ionizing radiation involves adverse health effects and must be prevented or at least reduced to reasonable levels. Radiation sources in this work are unsealed radioactive materials, that may be solids, liquid or in gaseous states, and in varying toxic levels. Various works and actions that are performed on the unsealed radioactive materials have varying potentials of dispersion, contamination and exposure, so that the combination of the type of work activity, isotope characteristics and physical state dictate the internal and external exposure risks. In order to limit the exposure of the personnel of installations and laboratories which deals with unsealed radioactive materials, national and international authorities and organizations standards and procedures for the requirements of construction and equipment of such installations and laboratories. This document means to be a proposal for an Israeli standard requirements for equipment and construction of installations working with low and medium activity unsealed radioactive materials. The targets for defining the, construction and equipment, requirements are: a. Safety and proper protection of personnel and public from external and internal exposure while the work is done properly. Proper protection against the risk of contaminating the environment. c. Standardization of requirements. d. Proper design of installations and laboratories. e. Supply means for evaluation and reduction of construction costs.The equipment detailed here refers to fixed (none movable) equipment which is a part of the construction of the laboratory or installation, unless specified otherwise. The document starts with a review of the recommendations of some international organizations (WHO, IAEA, NRPB) for construction and equipment requirements for these laboratories and installations. Then the

Environmental assessment in support of proposed interim energy conservation voluntary performance standards for new non-federal residential buildings: Volume 7

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-09-01

The objective of this environmental assessment (EA) is to identify the potential environmental impacts that could result from the proposed voluntary residential standard (VOLRES) on private sector construction of new residential buildings. In this report, the scope, objectives, and approach of this EA are presented.

77 FR 555 - National Emissions Standards for Hazardous Air Pollutants From Secondary Lead Smelting

Science.gov (United States)

2012-01-05

... 331492 0205 \\a\\ North American Industry Classification System. \\b\\ Maximum Achievable Control Technology... protective. NRDC v. EPA, 529 F.3d 1077, 1083 (DC Cir. 2008). On May 19, 2011, the EPA published a proposed... dioxin formation. Finalizing work practice standards for mercury. Revising the requirements in the NESHAP...

- LAA Occluder View for post-implantation Evaluation (LOVE) - standardized imaging proposal evaluating implanted left atrial appendage occlusion devices by cardiac computed tomography

International Nuclear Information System (INIS)

Behnes, Michael; Akin, Ibrahim; Sartorius, Benjamin; Fastner, Christian; El-Battrawy, Ibrahim; Borggrefe, Martin; Haubenreisser, Holger; Meyer, Mathias; Schoenberg, Stefan O.; Henzler, Thomas

2016-01-01

A standardized imaging proposal evaluating implanted left atrial appendage (LAA) occlusion devices by cardiac computed tomography angiography (cCTA) has never been investigated. cCTA datasets were acquired on a 3 rd generation dual-source CT system and reconstructed with a slice thickness of 0.5 mm. An interdisciplinary evaluation was performed by two interventional cardiologists and one radiologist on a 3D multi-planar workstation. A standardized multi-planar reconstruction algorithm was developed in order to assess relevant clinical aspects of implanted LAA occlusion devices being outlined within a pictorial essay. The following clinical aspects of implanted LAA occlusion devices were evaluated within the most appropriate cCTA multi-planar reconstruction: (1) topography to neighboring structures, (2) peri-device leaks, (3) coverage of LAA lobes, (4) indirect signs of neo-endothelialization. These are illustrated within concise CT imaging examples emphasizing the potential value of the proposed cCTA imaging algorithm: Starting from anatomical cCTA planes and stepwise angulation planes perpendicular to the base of the LAA devices generates an optimal LAA Occluder View for post-implantation Evaluation (LOVE). Aligned true axial, sagittal and coronal LOVE planes offer a standardized and detailed evaluation of LAA occlusion devices after percutaneous implantation. This pictorial essay presents a standardized imaging proposal by cCTA using multi-planar reconstructions that enables systematical follow-up and comparison of patients after LAA occlusion device implantation. The online version of this article (doi:10.1186/s12880-016-0127-y) contains supplementary material, which is available to authorized users

GENERIC QUALITY STANDARDS VS. SPECIFIC QUALITY STANDARDS: THE CASE OF HIGHER EDUCATION

Directory of Open Access Journals (Sweden)

Laila El Abbadi

2011-06-01

Full Text Available Quality as a new requirement for the field of higher education leads institutions to seek to satisfy generic or specific quality standards imposed directly or indirectly by its customers. The aim of this study is to compare between ISO9001, as a generic quality standard, and the Code of Practice of the Quality Assurance Agency for Higher Education (QAA, as a specific quality standard. A correlation matrix is drawn and correlation rates are calculated to show similarities and differences between them. This paper shows, first, that ISO9001 and QAA Code of Practice are compatible. Second, implementing a quality management system in accordance with ISO9001 requirements can constitute an adequate framework for the application of the QAA Code of Practice requirements. Third, to make the ISO9001 requirements closer to a specific quality standard in the field of higher education, it is recommended to complete these standards by specific requirements to the field of higher education.

Best practice in situ recovery uranium mining in Australia

International Nuclear Information System (INIS)

Lambert, I.B.; McKay, A.D.; Carson, L.J.

2010-01-01

The Australian Government policy is to ensure that uranium mining, milling and rehabilitation is based on world best practice standards. A best practice guide for in situ recovery (ISR) uranium mining has been developed to communicate the Australian Government's expectations with a view to achieving greater certainty that ISR mining projects meet Australian Government policy and consistency in the assessment of ISR mine proposals within multiple government regulatory processes. The guide focuses on the main perceived risks; impacts on groundwaters, disposal of mining residues, and radiation protection. World best practice does not amount to a universal template for ISR mining because the characteristics of individual ore bodies determine the best practice. (author)

Practical support for Lean Six Sigma software process definition using IEEE software engineering standards

CERN Document Server

Land, Susan K; Walz, John W

2012-01-01

Practical Support for Lean Six Sigma Software Process Definition: Using IEEE Software Engineering Standards addresses the task of meeting the specific documentation requirements in support of Lean Six Sigma. This book provides a set of templates supporting the documentation required for basic software project control and management and covers the integration of these templates for their entire product development life cycle. Find detailed documentation guidance in the form of organizational policy descriptions, integrated set of deployable document templates, artifacts required in suppo

Embracing Change: Adapting and Evolving Your Distance Learning Library Services to Meet the New ACRL Distance Learning Library Services Standards

Science.gov (United States)

Marcum, Brad

2016-01-01

This article examines the update and revision of the current Association of College and Research Libraries (ACRL) Distance Learning Standards that has been proposed and submitted to the ACRL Standards Committee. An in-depth analysis of the update is included, along with some comparisons between the old and new. Practical advice detailing…

An Examination of the Practicability of COBIT Framework and the Proposal of a COBIT-BSC Model

OpenAIRE

Zhang, S.; Le, Fever H.

2013-01-01

Control Objectives for Information and Related Technology (COBIT) becomes very popular in recent years and is regarded as the most comprehensive IT governance framework. However, its actual utilization and effectiveness are not clear due to the lack of academic studies. Also, the proliferation of other IT standards and best practices, such as ISO27000 series and ITIL, creates great challenges for organizations to understand their relations and to take advantage of them. The main objective of ...

Teachers' Practices in High School Chemistry Just Prior to the Adoption of the Next Generation Science Standards

Science.gov (United States)

Boesdorfer, Sarah B.; Staude, Kristin D.

2016-01-01

Effective professional development that influences teachers' classroom practices starts with what teachers know, understand, and do in their classroom. The Next Generation Science Standards (NGSS) challenge teachers to make changes to their classroom; to help teachers make these changes, it is necessary to know what they are doing in their…

Development of job standards for clinical nutrition therapy for dyslipidemia patients.

Science.gov (United States)

Kang, Min-Jae; Seo, Jung-Sook; Kim, Eun-Mi; Park, Mi-Sun; Woo, Mi-Hye; Ju, Dal-Lae; Wie, Gyung-Ah; Lee, Song-Mi; Cha, Jin-A; Sohn, Cheong-Min

2015-04-01

Dyslipidemia has significantly contributed to the increase of death and morbidity rates related to cardiovascular diseases. Clinical nutrition service provided by dietitians has been reported to have a positive effect on relief of medical symptoms or reducing the further medical costs. However, there is a lack of researches to identify key competencies and job standard for clinical dietitians to care patients with dyslipidemia. Therefore, the purpose of this study was to analyze the job components of clinical dietitian and develop the standard for professional practice to provide effective nutrition management for dyslipidemia patients. The current status of clinical nutrition therapy for dyslipidemia patients in hospitals with 300 or more beds was studied. After duty tasks and task elements of nutrition care process for dyslipidemia clinical dietitians were developed by developing a curriculum (DACUM) analysis method. The developed job standards were pretested in order to evaluate job performance, difficulty, and job standards. As a result, the job standard included four jobs, 18 tasks, and 53 task elements, and specific job description includes 73 basic services and 26 recommended services. When clinical dietitians managing dyslipidemia patients performed their practice according to this job standard for 30 patients the job performance rate was 68.3%. Therefore, the job standards of clinical dietitians for clinical nutrition service for dyslipidemia patients proposed in this study can be effectively used by hospitals.

Standard recommended practice for examination of fuel element cladding including the determination of the mechanical properties

International Nuclear Information System (INIS)

Anon.

1975-01-01

Guidelines are provided for the post-irradiation examination of fuel cladding and to achieve better correlation and interpretation of the data in the field of radiation effects. The recommended practice is applicable to metal cladding of all types of fuel elements. The tests cited are suitable for determining mechanical properties of the fuel elements cladding. Various ASTM standards and test methods are cited

Standardisation in standards

International Nuclear Information System (INIS)

McDonald, J. C.

2012-01-01

The following observations are offered by one who has served on national and international standards-writing committees and standards review committees. Service on working groups consists of either updating previous standards or developing new standards. The process of writing either type of document proceeds along similar lines. The first order of business is to recognise the need for developing or updating a standard and to identify the potential user community. It is also necessary to ensure that there is a required number of members willing to do the writing. A justification is required as to why a new standard should be developed, and this is written as a new work item proposal or a project initiation notification system form. This document must be filed officially and approved, and a search is then undertaken to ensure that the proposed new standard will not duplicate a standard that has already been published or is underway in another standards organisation. (author)

Standard practice of calibration of force-measuring instruments for verifying the force indication of testing machines

CERN Document Server

American Society for Testing and Materials. Philadelphia

2006-01-01

1.1 The purpose of this practice is to specify procedures for the calibration of force-measuring instruments. Procedures are included for the following types of instruments: 1.1.1 Elastic force-measuring instruments, and 1.1.2 Force-multiplying systems, such as balances and small platform scales. Note 1Verification by deadweight loading is also an acceptable method of verifying the force indication of a testing machine. Tolerances for weights for this purpose are given in Practices E 4; methods for calibration of the weights are given in NIST Technical Note 577, Methods of Calibrating Weights for Piston Gages. 1.2 The values stated in SI units are to be regarded as the standard. Other metric and inch-pound values are regarded as equivalent when required. 1.3 This practice is intended for the calibration of static force measuring instruments. It is not applicable for dynamic or high speed force calibrations, nor can the results of calibrations performed in accordance with this practice be assumed valid for...

The other shoe drops--FASB (Financial Accounting Standards Board) issues its proposed statement on employers' accounting for postretirement medical benefits.

Science.gov (United States)

Melbinger, M S

1989-06-01

The Financial Accounting Standards Board recently issued an exposure draft dealing with employers' accounting for postretirement medical or life insurance benefits. Mr. Melbinger explains the implications of these proposed changes in accounting procedures and discusses the status of case law dealing with employers' rights to modify or terminate retiree medical coverage.

A study of science leadership and science standards in exemplary standards-based science programs

Science.gov (United States)

Carpenter, Wendy Renae

The purpose for conducting this qualitative study was to explore best practices of exemplary standards-based science programs and instructional leadership practices in a charter high school and in a traditional high school. The focus of this study included how twelve participants aligned practices to National Science Education Standards to describe their science programs and science instructional practices. This study used a multi-site case study qualitative design. Data were obtained through a review of literature, interviews, observations, review of educational documents, and researcher's notes collected in a field log. The methodology used was a multi-site case study because of the potential, through cross analysis, for providing greater explanation of the findings in the study (Merriam, 1988). This study discovered six characteristics about the two high school's science programs that enhance the literature found in the National Science Education Standards; (a) Culture of expectations for learning-In exemplary science programs teachers are familiar with a wide range of curricula. They have the ability to examine critically and select activities to use with their students to promote the understanding of science; (b) Culture of varied experiences-In exemplary science programs students are provided different paths to learning, which help students, take in information and make sense of concepts and skills that are set forth by the standards; (c) Culture of continuous feedback-In exemplary science programs teachers and students work together to engage students in ongoing assessments of their work and that of others as prescribed in the standards; (d) Culture of Observations-In exemplary science programs students, teachers, and principals reflect on classroom instructional practices; teachers receive ongoing evaluations about their teaching and apply feedback towards improving practices as outlined in the standards; (e) Culture of continuous learning-In exemplary

From policy to practice: strategies to meet physical activity standards in YMCA afterschool programs.

Science.gov (United States)

Beets, Michael W; Weaver, Robert G; Moore, Justin B; Turner-McGrievy, Gabriel; Pate, Russell R; Webster, Collin; Beighle, Aaron

2014-03-01

In 2011, the U.S. Young Men's Christian Association (YMCA) adopted activity standards recommending that afterschool programs (ASPs) ensure all children engage in a minimum of 30 minutes of moderate to vigorous physical activity (MVPA) daily during the ASP. ASPs decide how to accomplish this standard, for which few effective strategies exist. To evaluate strategies designed to help ASPs meet the MVPA standard. Single group intervention with pretest and three follow-up measures repeated-cross-sectional design with a subsample cohort. Four large-scale YMCA ASPs, serving approximately 500 children each day. Community-based participatory development of strategies focused on modification of program schedules, professional development training, and weekly checklists to evaluate activity opportunities. Accelerometry-derived MVPA classified as meet or fail-to-meet the 30 minutes' MVPA/day standard collected over a minimum of 4 nonconsecutive days at baseline (fall 2011) and three follow-up assessments (spring 2012, fall 2012, spring 2013). Random intercept logistic regression models evaluated the probability of meeting the standard for boys and girls, separately (analyzed summer 2013). A total of 895 children (aged 5-12 years, 48.4% girls) representing 3654 daily measures were collected across the four assessments. The percentage of girls and boys meeting the MVPA standard at baseline was 13.3% and 28.0%, respectively. By spring 2013, this increased to 29.3% and 49.6%. These changes represented an increase in the odds of meeting the 30 minutes' MVPA/day standard by 1.5 (95% CI=1.1, 2.0) and 2.4 (95% CI=1.2, 4.8) for girls and boys, respectively. The strategies developed herein represent an effective approach to enhancing current practice within YMCA ASPs to achieve existing MVPA standards. Additional work is necessary to evaluate the scalability of the strategies in a larger sample of ASPs. © 2014 American Journal of Preventive Medicine Published by American Journal of

Conscientious objection to sexual and reproductive health services: international human rights standards and European law and practice.

Science.gov (United States)

Zampas, Christina; Andión-Ibañez, Ximena

2012-06-01

The practice of conscientious objection often arises in the area of individuals refusing to fulfil compulsory military service requirements and is based on the right to freedom of thought, conscience and religion as protected by national, international and regional human rights law. The practice of conscientious objection also arises in the field of health care, when individual health care providers or institutions refuse to provide certain health services based on religious, moral or philosophical objections. The use of conscientious objection by health care providers to reproductive health care services, including abortion, contraceptive prescriptions, and prenatal tests, among other services is a growing phenomena throughout Europe. However, despite recent progress from the European Court of Human Rights on this issue (RR v. Poland, 2011), countries and international and regional bodies generally have failed to comprehensively and effectively regulate this practice, denying many women reproductive health care services they are legally entitled to receive. The Italian Ministry of Health reported that in 2008 nearly 70% of gynaecologists in Italy refuse to perform abortions on moral grounds. It found that between 2003 and 2007 the number of gynaecologists invoking conscientious objection in their refusal to perform an abortion rose from 58.7 percent to 69.2 percent. Italy is not alone in Europe, for example, the practice is prevalent in Poland, Slovakia, and is growing in the United Kingdom. This article outlines the international and regional human rights obligations and medical standards on this issue, and highlights some of the main gaps in these standards. It illustrates how European countries regulate or fail to regulate conscientious objection and how these regulations are working in practice, including examples of jurisprudence from national level courts and cases before the European Court of Human Rights. Finally, the article will provide recommendations

Standard Practice for Conducting Irradiations at Accelerator-Based Neutron Sources

CERN Document Server

American Society for Testing and Materials. Philadelphia

1996-01-01

1.1 This practice covers procedures for irradiations at accelerator-based neutron sources. The discussion focuses on two types of sources, namely nearly monoenergetic 14-MeV neutrons from the deuterium-tritium T(d,n) interaction, and broad spectrum neutrons from stopping deuterium beams in thick beryllium or lithium targets. However, most of the recommendations also apply to other types of accelerator-based sources, including spallation neutron sources (1). Interest in spallation sources has increased recently due to their proposed use for transmutation of fission reactor waste (2). 1.2 Many of the experiments conducted using such neutron sources are intended to simulate irradiation in another neutron spectrum, for example, that from a DT fusion reaction. The word simulation is used here in a broad sense to imply an approximation of the relevant neutron irradiation environment. The degree of conformity can range from poor to nearly exact. In general, the intent of these simulations is to establish the fundam...

Proposal of quality indicators for cardiac rehabilitation after acute coronary syndrome in Japan: a modified Delphi method and practice test.

Science.gov (United States)

Ohtera, Shosuke; Kanazawa, Natsuko; Ozasa, Neiko; Ueshima, Kenji; Nakayama, Takeo

2017-01-27

Cardiac rehabilitation is underused and its quality in practice is unclear. A quality indicator is a measurable element of clinical practice performance. This study aimed to propose a set of quality indicators for cardiac rehabilitation following an acute coronary event in the Japanese population and conduct a small-size practice test to confirm feasibility and applicability of the indicators in real-world clinical practice. This study used a modified Delphi technique (the RAND/UCLA appropriateness method), a consensus method which involves an evidence review, a face-to-face multidisciplinary panel meeting and repeated anonymous rating. Evidence to be reviewed included clinical practice guidelines available in English or Japanese and existing quality indicators. Performance of each indicator was assessed retrospectively using medical records at a university hospital in Japan. 10 professionals in cardiac rehabilitation for the consensus panel. In the literature review, 23 clinical practice guidelines and 16 existing indicators were identified to generate potential indicators. Through the consensus-building process, a total of 30 indicators were assessed and finally 13 indicators were accepted. The practice test (n=39) revealed that 74% of patients underwent cardiac rehabilitation. Median performance of process measures was 93% (IQR 46-100%). 'Communication with the doctor who referred the patient to cardiac rehabilitation' and 'continuous participation in cardiac rehabilitation' had low performance (32% and 38%, respectively). A modified Delphi technique identified a comprehensive set of quality indicators for cardiac rehabilitation. The single-site, small-size practice test confirmed that most of the proposed indicators were measurable in real-world clinical practice. However, some clinical processes which are not covered by national health insurance in Japan had low performance. Further studies will be needed to clarify and improve the quality of care in cardiac

A proposal to improve ecological compensation practice in road and railway projects in Spain

Energy Technology Data Exchange (ETDEWEB)

Villarroya, Ana, E-mail: avillarroya@alumni.unav.es; Puig, Jordi, E-mail: jpbaguer@unav.es

2013-09-15

To reduce ecological impacts caused by development projects, avoidance, minimization and compensation techniques have to be taken together into consideration along Environmental Impact Assessment (EIA) procedures. This paper explores the particular role that ecological compensation has had in recent road and railway EIA procedures in Spain, as seen through the review of a set of recent EIA Records of Decision (RODs) that confirms precedent findings. Noticing that residual impacts are not paid much attention, and that there is no evidence of a solid public participation in ecological impact evaluation, it proposes to increase the awareness on residual impacts, as a way to make easier public access to the allegedly most sensitive moment of EIA implementation: (residual) impact evaluation. -- Highlights: ► Ecological compensation practice in Spain is much lower than avoidance or mitigation. ► Residual impacts are overlooked in EIA processes and public participation is low. ► An increased awareness of residual impacts may also promote public participation. ► Current context needs these small steps to move towards better compensation practice.

International implications of nuclear Q.A. standards

International Nuclear Information System (INIS)

Stoddart, D.E.

1976-01-01

The work of the International Atomic Energy Agency (I.A.E.A.) in the field of Quality Assurance is aimed at preparing a Code of Practice covering recommendations on safety aspects only which is designed to be usable by all nations. This Code is followed up by a series of Safety Guides as aids to developing nations faced with the need to regulate and assure safety, reliability and quality. The I.A.E.A. Code is not written as a mandatory document and it can only recommend and therefore the term 'should' is used throughout. The International Organization for Standardization (I.S.O.) is concerned with producing standards and as such the proposed I.S.O. draft standard on 'Quality Assurance for Nuclear Power Plants' is written in mandatory language, it uses the word 'shall'. The I.S.O. standard will also cover not only safety aspects but also those of a successfully operating nuclear power plant. The I.S.O. Working Group is charged with producing standards on quality assurance covering the design, procurement, fabrication, construction, operation, maintenance and decommissioning of structure, systems and components of nuclear power plants. The work of both organizations is discussed briefly. (author)

Standard practice for verification of constant amplitude dynamic forces in an axial fatigue testing system

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 This practice covers procedures for the dynamic verification of cyclic force amplitude control or measurement accuracy during constant amplitude testing in an axial fatigue testing system. It is based on the premise that force verification can be done with the use of a strain gaged elastic element. Use of this practice gives assurance that the accuracies of forces applied by the machine or dynamic force readings from the test machine, at the time of the test, after any user applied correction factors, fall within the limits recommended in Section 9. It does not address static accuracy which must first be addressed using Practices E 4 or equivalent. 1.2 Verification is specific to a particular test machine configuration and specimen. This standard is recommended to be used for each configuration of testing machine and specimen. Where dynamic correction factors are to be applied to test machine force readings in order to meet the accuracy recommended in Section 9, the verification is also specific to the c...

An exploratory study of the influence of national and state standards on middle school science teachers' classroom assessment practices

Science.gov (United States)

McWaters, Kathy Jean

2001-07-01

Classroom assessment practices of middle school science teachers were identified and the influence of national and state science standards on these practices was examined. In Phase I of this study a mail questionnaire was sent to 450 middle school (grades 5,6,7 and 8) science teachers in 17 parishes in Louisiana to obtain information about their classroom assessment practices. In Phase II, nine middle school teachers in eight departmentalized classrooms, two classes at each grade, participated in a qualitative study. Data were collected through questionnaires, classroom observations, interviews and document analysis. Data analysis revealed three major categories of classroom assessment targets: (a) student achievement, (b) student attitudes and, (c) student products. Results indicated that most teachers are using different assessment methods when assessing different achievement targets, as recommended by science reform documents. It was also determined that many teachers are using appropriate methods to assess student learning. While teachers reported that students spend an inordinate amount of time engaged in assessment activities, classroom observations suggested that the activities were not always written tests or graded activities. Another key finding is that there is a disconnect between the quality of teaching and the quality of assessment. Teachers who teach the material recommended by science reform documents and use recommended instructional strategies were observed to stop teaching and engage students in a "test rehearsal" geared towards rote memorization of factual information. Data suggest that the national and state science content standards are influencing the content and the format of teacher-made tests. Teachers' reported using the standards during assessment construction or selection in a wide variety of ways. The most direct use of the standards reported was to select content, format and cognitive level for test items. A more circumspect approach

Standards - the common element in providing the safety, quality and performance of the medical practice

Science.gov (United States)

Greabu, Mihai

2009-01-01

Knowing and applying standards is an opportunity of the years 2007-2008 in any kind of field where a successful activity is intended and this assures a certain way towards competence and quality. The most recent German studies highlighted, to the surprise of the specialists, that standardization holds the second place, after the material means, in the row of the elements considered to be decisive for the success of a business. The existence of standards and the concern for their implementation in the activity provides a high technical and quality level of the products services offered to the clients and the increase in the level of competence of the personnel, who will be able to cope with all the challenges. This need comes from the process of Romania’s accession to the European Union. There are a lot of reasons why standards represent a fundamental part of our daily life. Practically, we are surrounded by standards. Everything is „working” well and it is efficient if the standards used as a base for manufacturing „things” have been correctly developed and applied. Standards open communication channels and commercial channels, promote the understanding of technical products, the compatibility of products and services, facilitate mass production and, most importantly, they are the necessary base for the achievement of the objectives in the fields of health and safety and a better quality of life. The transition towards the global market needs an instrument for the removal of the barriers to the application of the latest discoveries in the field of medical instruments, materials and manual labor. Each medical device, equipment and material used in the Dental and General Medicine is standardized, in fact that leads to their better knowing and provides controllable treatment for manual labor with predictable and repeatable results. This presentation intends to make a survey of some general aspects on standardization as well as a review of the standards in

[Modularization by the open standard. (II)].

Science.gov (United States)

Muto, M; Takaha, Y; Chiba, N

2000-10-01

In recent years, accompanied by the marvelous development and spread of Laboratory Automation System(LAS), the NCCLS is now proposing five international standards for laboratory automation. We have based our laboratory on these "NCCLS standards of laboratory automation", we take these standards ahead first, and we now propose an open standard called "Open LA 21", to establish more detailed standard replacing the NCCLS laboratory automation standards.

Standard practice for qualification and acceptance of boron based metallic neutron absorbers for nuclear criticality control for dry cask storage systems and transportation packaging

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 This practice provides procedures for qualification and acceptance of neutron absorber materials used to provide criticality control by absorbing thermal neutrons in systems designed for nuclear fuel storage, transportation, or both. 1.2 This practice is limited to neutron absorber materials consisting of metal alloys, metal matrix composites (MMCs), and cermets, clad or unclad, containing the neutron absorber boron-10 (10B). 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

77 FR 68717 - Updating OSHA Standards Based on National Consensus Standards; Head Protection

Science.gov (United States)

2012-11-16

..., 1918, and 1926 [Docket No. OSH-2011-0184] RIN 1218-AC65 Updating OSHA Standards Based on National Consensus Standards; Head Protection AGENCY: Occupational Safety and Health Administration (OSHA), Labor. ACTION: Proposed rule; withdrawal. SUMMARY: With this notice, OSHA is withdrawing the proposed rule that...

A Systematic Analysis of Functional Safety Certification Practices in Industrial Robot Software Development

Directory of Open Access Journals (Sweden)

Tong Xie

2017-01-01

Full Text Available For decades, industry robotics have delivered on the promise of speed, efficiency and productivity. The last several years have seen a sharp resurgence in the orders of industrial robots in China, and the areas addressed within industrial robotics has extended into safety-critical domains. However, safety standards have not yet been implemented widely in academia and engineering applications, particularly in robot software development. This paper presents a systematic analysis of functional safety certification practices in software development for the safety-critical software of industrial robots, to identify the safety certification practices used for the development of industrial robots in China and how these practices comply with the safety standard requirements. Reviewing from Chinese academic papers, our research shows that safety standards are barely used in software development of industrial robot. The majority of the papers propose various solutions to achieve safety, but only about two thirds of the papers refer to non-standardized approaches that mainly address the systematic level rather than the software development level. In addition, our research shows that with the development of artificial intelligent, an emerging field is still on the quest for standardized and suitable approaches to develop safety-critical software.

Standard practices for sampling uranium-Ore concentrate

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 These practices are intended to provide the nuclear industry with procedures for obtaining representative bulk samples from uranium-ore concentrates (UOC) (see Specification C967). 1.2 These practices also provide for obtaining a series of representative secondary samples from the original bulk sample for the determination of moisture and other test purposes, and for the preparation of pulverized analytical samples (see Test Methods C1022). 1.3 These practices consist of a number of alternative procedures for sampling and sample preparation which have been shown to be satisfactory through long experience in the nuclear industry. These procedures are described in the following order. Stage Procedure Section Primary Sampling One-stage falling stream 4 Two-stage falling stream 5 Auger 6 Secondary Sampling Straight-path (reciprocating) 7 Rotating (Vezin) 8, 9 Sample Preparation 10 Concurrent-drying 11-13 Natural moisture 14-16 Calcination 17, 18 Sample Packaging 19 Wax s...

An Approach to Establishing International Quality Standards for Medical Travel

Directory of Open Access Journals (Sweden)

Ondřej eKácha

2016-03-01

Full Text Available Traveling abroad to receive a non-elective treatment is expanding each year. Such rising popularity of medical travel and the absence of clear minimum quality requirements in this area urgently calls for setting international standards to ensure good practice and patient safety. The aim of this study is to identify the key domains in medical travel where such quality standards should be established. Drawing from the evidence-based OECD framework and an extensive literature review, this study proposes three critical areas for international quality standards in medical travel: minimum standards of health care facilities and third-party agencies, financial responsibility and patient-centeredness. Several cultural challenges are subsequently introduced that may pose a barrier to the development of the guidelines and should be additionally taken into consideration. Establishing international quality standards in medical travel enhances the benefits to patients and providers, which is urgently needed given the rapid growth in this industry.

Creating standards: Creating illusions?

DEFF Research Database (Denmark)

Linneberg, Mai Skjøtt

written standards may open up for the creation of illusions. These are created when written standards' content is not in accordance with the perception standard adopters and standard users have of the specific practice phenomenon's content. This general theoretical argument is exemplified by the specific...

Industry standards catch up with in-service welding

Energy Technology Data Exchange (ETDEWEB)

Bruce, W.A.

1999-11-01

Welding onto a pipeline after it has been put into service, a practice commonly referred to as hot tap welding, is frequently required for several reasons. Repair sleeves are installed to reinforce areas of corrosion or mechanical damage, and branch connections are made for system modifications. There are often significant economic incentives to perform this welding without removing the system from service. Operations are maintained during welding and the pipe's contents are not vented into the atmosphere. Due to technological advances in in-service welding, industry needed an update to standards and recommended practices. This year, the American Petroleum Institute (API) hopes to meet that need. The 19th edition of API Standard 1104--Welding of Pipelines and Related Facilities, includes a new appendix that pertains to in-service welding. Appendix B, In-Service Welding, is intended to eventually replace API Recommended Practice 1107--Pipeline Maintenance Welding Practices. API 1107, which was introduced in 1966 and updated in 1987 and 1991, is intended to provide recommended practices for pipeline maintenance welding. The current third edition approached its mandatory five-year review in 1996 by the API-AGA Joint Committee on Oil and Gas Pipeline Field Welding Practices, which also maintains API 1104. The committee saw 11078 needed to reflect the updates that had been made to 1104 as well as the technological advances for in-service welding. To alleviate redundancy between the two documents, and to alleviate lag time between updates, the committee approved a proposal to update and incorporate requirements of API 1107 into an appendix of API 1104. In the meantime, the third edition of API 1107 was reapproved for another five-year review cycle.

Comparison of National and International Standards of Good Egg Production Practices

Directory of Open Access Journals (Sweden)

GP Sousa

Full Text Available ABSTRACT Egg production is an important economic activity in Brazil, with about 697 million eggs produced annually. The conventional cage system is commonly used for egg production. However, there has been a growing concern for the welfare of laying hens around the world. In this context, many countries have issued laws, protocols, and other normative technical specifications to ensure the welfare of layers. This study aims at identifying similarities and differences between international standards and Brazilian protocols using the Comparative Law perspective. This article reports an analytical study of selected protocols, performing three analyses using the Comparative Law method. The research concludes that some items of the Brazilian protocols of good egg production practices, such as farm inspection, treatment of diseases, temperature, ventilation, beak trimming, feed and water supply, correspond to international specifications, whereas others, such as housing, freedom movement, use of equipment, and transport, are less strict.

77 FR 37587 - Updating OSHA Standards Based on National Consensus Standards; Head Protection

Science.gov (United States)

2012-06-22

... Z89.1-2003 as Appendix E, to the main text. Adds ``ASTM E1164-02 Colorimetry--Standard Practice for... National complete citations for standards on Standards Referred to in This colorimetry, headforms, and...

77 FR 37617 - Updating OSHA Standards Based on National Consensus Standards; Head Protection

Science.gov (United States)

2012-06-22

... Z89.1-2003 as Appendix E, to the main text. Adds ``ASTM E1164-02 Colorimetry--Standard Practice for... National complete citations for standards on Standards Referred to in This colorimetry, headforms, and...

Simulation with standardized patients to prepare undergraduate nursing students for mental health clinical practice: An integrative literature review.

Science.gov (United States)

Øgård-Repål, Anita; De Presno, Åsne Knutson; Fossum, Mariann

2018-04-22

To evaluate the available evidence supporting the efficacy of using simulation with standardized patients to prepare nursing students for mental health clinical practice. Integrative literature review. A systematic search of the electronic databases CINAHL (EBSCOhost), Embase, MEDLINE, PsycINFO, and SveMed+ was conducted to identify empirical studies published until November 2016. Multiple search terms were used. Original empirical studies published in English and exploring undergraduate nursing students' experiences of simulation with standardized patients as preparation for mental health nursing practice were included. A search of reference lists and gray literature was also conducted. In total, 1677 studies were retrieved; the full texts of 78 were screened by 2 of the authors, and 6 studies reminded in the review. The authors independently reviewed the studies in three stages by screening the titles, abstracts, and full texts, and the quality of the included studies was assessed in the final stage. Design-specific checklists were used for quality appraisal. The thematic synthesizing method was used to summarize the findings of the included studies. The studies used four different research designs, both qualitative and quantitative. All studies scored fairly low in the quality appraisal. The five themes identified were enhanced confidence, clinical skills, anxiety regarding the unknown, demystification, and self-awareness. The findings of this study indicate that simulation with standardized patients could decrease students' anxiety level, shatter pre-assumptions, and increase self-confidence and self-awareness before entering clinical practice in mental health. More high-quality studies with larger sample sizes are required because of the limited evidence provided by the six studies in the present review. Copyright © 2018 Elsevier Ltd. All rights reserved.

International safety standards and regulatory practices and their application to Brazilian nuclear power plants - a realistic view

International Nuclear Information System (INIS)

Almeida, Claudio; Camargo, Claudio

1999-01-01

An international nuclear safety regime is being established through a series of binding safety conventions, voluntarily adopted international safety standards and an accompanying peer review process. The basis for the evaluation of each country performance within this international regime should be the international practices. However, local conditions should be taken into account to avoid undue stress of the limited resources available to countries with a limited nuclear power programme. This work reviews the current international nuclear safety and discusses the application of some international practices to the Brazilian situation, considering the peculiarities of the national nuclear power programme and the limitations of the available financial and human resources. (author)

Association of Implementation of Practice Standards for Electrocardiographic Monitoring with Nurses’ Knowledge, Quality of Care, and Patient Outcomes: Findings from the Practical Use of the Latest Standards of Electrocardiography (PULSE) Trial

Science.gov (United States)

Funk, Marjorie; Fennie, Kristopher P.; Stephens, Kimberly E.; May, Jeanine L.; Winkler, Catherine G.; Drew, Barbara J.

2017-01-01

Background Although continuous electrocardiographic (ECG) monitoring is ubiquitous in hospitals, monitoring practices are inconsistent. We evaluated implementation of American Heart Association practice standards for ECG monitoring on nurses’ knowledge, quality of care, and patient outcomes. Methods and Results The PULSE Trial was a 6-year multi-site randomized clinical trial with crossover that took place in 65 cardiac units in 17 hospitals. We measured outcomes at baseline, Time 2 after Group 1 hospitals received the intervention, and Time 3 after Group 2 hospitals received the intervention. Measurement periods were 15 months apart. The 2-part intervention consisted of an online ECG monitoring education program and strategies to implement and sustain change in practice. Nurses’ knowledge (N=3,013 nurses) was measured by a validated 20-item online test, quality of care related to ECG monitoring (N=4,587 patients) by on-site observation, and patient outcomes (mortality, in-hospital myocardial infarction, and not surviving a cardiac arrest) (N=95,884 hospital admissions) by review of administrative, laboratory, and medical record data. Nurses’ knowledge improved significantly immediately following the intervention in both groups, but was not sustained 15 months later. For most measures of quality of care (accurate electrode placement, accurate rhythm interpretation, appropriate monitoring, and ST-segment monitoring when indicated), the intervention was associated with significant improvement, which was sustained 15 months later. Of the 3 patient outcomes, only in-hospital myocardial infarction declined significantly after the intervention, and was sustained. Conclusions Online ECG monitoring education and strategies to change practice can lead to improved nurses’ knowledge, quality of care, and patient outcomes. PMID:28174175

Computation of standard deviations in eigenvalue calculations

International Nuclear Information System (INIS)

Gelbard, E.M.; Prael, R.

1990-01-01

In Brissenden and Garlick (1985), the authors propose a modified Monte Carlo method for eigenvalue calculations, designed to decrease particle transport biases in the flux and eigenvalue estimates, and in corresponding estimates of standard deviations. Apparently a very similar method has been used by Soviet Monte Carlo specialists. The proposed method is based on the generation of ''superhistories'', chains of histories run in sequence without intervening renormalization of the fission source. This method appears to have some disadvantages, discussed elsewhere. Earlier numerical experiments suggest that biases in fluxes and eigenvalues are negligibly small, even for very small numbers of histories per generation. Now more recent experiments, run on the CRAY-XMP, tend to confirm these earlier conclusions. The new experiments, discussed in this paper, involve the solution of one-group 1D diffusion theory eigenvalue problems, in difference form, via Monte Carlo. Experiments covered a range of dominance ratios from ∼0.75 to ∼0.985. In all cases flux and eigenvalue biases were substantially smaller than one standard deviation. The conclusion that, in practice, the eigenvalue bias is negligible has strong theoretical support. (author)

Competence, practical rationality and what a patient values.

Science.gov (United States)

Craigie, Jillian

2011-07-01

According to the principle of patient autonomy, patients have the right to be self-determining in decisions about their own medical care, which includes the right to refuse treatment. However, a treatment refusal may legitimately be overridden in cases where the decision is judged to be incompetent. It has recently been proposed that in assessments of competence, attention should be paid to the evaluative judgments that guide patients' treatment decisions. In this paper I examine this claim in light of theories of practical rationality, focusing on the difficult case of an anorexic person who is judged to be competent and refuses treatment, thereby putting themselves at risk of serious harm. I argue that the standard criteria for competence assess whether a treatment decision satisfies the goals of practical decision-making, and that this same criterion can be applied to a patient's decision-guiding commitments. As a consequence I propose that a particular understanding of practical rationality offers a theoretical framework for justifying involuntary treatment in the anorexia case. © 2009 Blackwell Publishing Ltd.

Integrated management system best practices in radioecological laboratories

International Nuclear Information System (INIS)

Carvalho, Claudia Aparecida Zerbinatti de

2010-01-01

The research aims to study the best practices to support a conceptual proposal for IMS - Integrated Management System (quality, environment, safety and health) applicable to Radioecology laboratories. The research design is organized into the following steps: in a first step, it was developed the bibliographic and documentary research in IMS, survey and study of standards (QMS ISO 9000 (2005), ISO 9001 (2008), ISO 9004 (2000), EMS ISO 14001 (2004) and OHSMS OHSAS 18001 (2007) and OHSAS 18002 (2008)), identification and characterization of processes in Radioecology Laboratories and study of best practices methodology and benchmarking; in the second stage of the research it was developed a case study (qualitative research, with questionnaires via e-mail and interviews, when possible), preceded by a survey and selection of international and national radioecology laboratories and then these laboratories were contacted and some of them agreed to participate in this research; in the third stage of the research it was built the framework of best practices that showed results that could support the conceptual proposal for the IMS Radioecology Laboratory; the fourth and final stage of research consisted in the construction of the proposed conceptual framework of SGI for Radioecology Laboratory, being then achieved the initial objective of the research. (author)

Standardized 15N tracer method for the determination of parameters of the whole-body protein metabolism in clinical practice

International Nuclear Information System (INIS)

Junghans, P.; Jung, K.; Matkowitz, R.

1984-01-01

A standardized 15 N tracer method is described for the assessment of nitrogen and protein metabolism in healthy and pathological changed organisms. The method represents an isotope technical procedure for the application in clinical research and practice. The clinical preparation of the patient/proband by means of a standardized nutritional regime, the tracer administration (single dose) and the sampling (urine, blood), the 15 N tracer technique (sample chemistry, emissionsspectrometric isotope analysis) and the mathematical evaluation of 15 N tracer data are described. (author)

XML-based formulation of field theoretical models. A proposal for a future standard and data base for model storage, exchange and cross-checking of results

International Nuclear Information System (INIS)

Demichev, A.; Kryukov, A.; Rodionov, A.

2002-01-01

We propose an XML-based standard for formulation of field theoretical models. The goal of creation of such a standard is to provide a way for an unambiguous exchange and cross-checking of results of computer calculations in high energy physics. At the moment, the suggested standard implies that models under consideration are of the SM or MSSM type (i.e., they are just SM or MSSM, their submodels, smooth modifications or straightforward generalizations). (author)

Standard practice for strain controlled thermomechanical fatigue testing

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This practice covers the determination of thermomechanical fatigue (TMF) properties of materials under uniaxially loaded strain-controlled conditions. A “thermomechanical” fatigue cycle is here defined as a condition where uniform temperature and strain fields over the specimen gage section are simultaneously varied and independently controlled. This practice is intended to address TMF testing performed in support of such activities as materials research and development, mechanical design, process and quality control, product performance, and failure analysis. While this practice is specific to strain-controlled testing, many sections will provide useful information for force-controlled or stress-controlled TMF testing. 1.2 This practice allows for any maximum and minimum values of temperature and mechanical strain, and temperature-mechanical strain phasing, with the restriction being that such parameters remain cyclically constant throughout the duration of the test. No restrictions are placed on en...

Description and status update on GELLO: a proposed standardized object-oriented expression language for clinical decision support.

Science.gov (United States)

Sordo, Margarita; Boxwala, Aziz A; Ogunyemi, Omolola; Greenes, Robert A

2004-01-01

A major obstacle to sharing computable clinical knowledge is the lack of a common language for specifying expressions and criteria. Such a language could be used to specify decision criteria, formulae, and constraints on data and action. Al-though the Arden Syntax addresses this problem for clinical rules, its generalization to HL7's object-oriented data model is limited. The GELLO Expression language is an object-oriented language used for expressing logical conditions and computations in the GLIF3 (GuideLine Interchange Format, v. 3) guideline modeling language. It has been further developed under the auspices of the HL7 Clinical Decision Support Technical Committee, as a proposed HL7 standard., GELLO is based on the Object Constraint Language (OCL), because it is vendor-independent, object-oriented, and side-effect-free. GELLO expects an object-oriented data model. Although choice of model is arbitrary, standardization is facilitated by ensuring that the data model is compatible with the HL7 Reference Information Model (RIM).

Practical Suggestions for Calculating Supercritical Water-Steam Properties

Energy Technology Data Exchange (ETDEWEB)

Kim, Seongil; Choi, Sangmin [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

2016-12-15

A standard procedure for determining water-steam properties has been established through an international collaboration in addition to a domestic effort. The current accepted international standard for industrial application is based on the IAPWS-IF97 (International Association for the Properties of Water and Steam-Industrial Formation 97). Based on this standard, the ASME (American Society of Mechanical Engineers)/NIST (National Institute of Standard and Technology) developed the REPROP program in the USA, and the JSME (Japan Society of Mechanical Engineers) developed the steam table and calculation code. Upon applying this standard procedure, modified procedures were proposed for computational convenience, particularly in the supercritical pressure region where non-smooth variations of water-steam properties were distinctively observed. In this paper, the internationally adopted procedures and the progress of related activities are briefly summarized. Some practical considerations are presented for the efficient execution of computational code.

Practical reference - radiation standards in Canada

International Nuclear Information System (INIS)

1983-07-01

In developing a policy that will require licensees to calibrate their radiation dose measuring devices and trace such calibrations to approved reference standards, the AECB has consulted recognized experts. This document presents the experts' reports and recommendations which will be considered in finalizing the policy

[Standard control for diabetes in older adults based on practice guidelines--the target values of blood glucose, blood pressure and lipids].

Science.gov (United States)

Sugimoto, Ken; Rakugi, Hiromi

2013-11-01

As for standard controls for life style diseases in older adults, the standard control for hypertension in elderly is defined in detail by the guideline for hypertension, however, that for diabetes or dyslipidemia is not clearly defined by each guideline although each has additional descriptions for elderly. The reports about 'Diabetes in Older Adults' and 'Standards of Medical Care in Diabetes 2013' have been published from American Diabetes Association (ADA), and the standard controls for diabetes might be reviewed in the light of these reports in Japan. Here we would like to consider the standard control and recent trends for diabetes in older adults on the basis of the current practice guidelines.

15 CFR 10.3 - Development of a proposed standard.

Science.gov (United States)

2010-01-01

... rational statements pertaining to the requirements and test methods contained in the standard, if deemed... be submitted to the Department for further processing. [51 FR 22497, June 20, 1986, as amended at 55...

Integrated monitoring: Setting new standards for the next decade of clinical trial practice

Directory of Open Access Journals (Sweden)

Kamala Rai

2011-01-01

Full Text Available The new age clinical research professional is now geared toward an "integrated monitoring" approach. A number of critical activities at the site level and at the sponsor′s organization need convergence to harness rich dividends in early study start and quick close of the study. The field monitor needs full integration to ensure standard of care, train the site in protocol, select the right site, ensure regulatory support, ensure excellent project management skills, coach, support the logistics team, manage the vendor, ensure good documentation practices, develop patient recruitment and retention, lean the applicable process, as well as ensure effective site management amongst the myriad activities assigned toward developing the drug in the clinic.

Synoptic meteorology manual of standard practices

Energy Technology Data Exchange (ETDEWEB)

Jenne, D.E.

1954-03-22

This report, dated March 22, 1954 details work procedures for the 200- West Area at HAPO. Topics discussed include emergency procedures, safety and housekeeping practices, policies and procedures, instruments and equipment located at the 622 tower, instruments and equipment located offsite, observational procedures, form entries, and card punching, and weather forecasting.

Assessment of self-perception of physical fitness and proposal for standards among Chilean adolescent students: the EAPAF study.

Science.gov (United States)

Cossio-Bolaños, Marco; Vasquez, Pablo; Luarte-Rocha, Cristian; Sulla-Torres, José; Gómez Campos, Rossana

2016-08-01

Physical fitness may be assessed among children and adolescents in a quantitative and qualitative manner. At present, in Chile, there are no tools available to assess self-perception of physical fitness. Therefore, the purpose of this study was to develop a valid and reliable instrument that would allow to assess selfperception of physical fitness among adolescents and propose standards for age and sex. A survey was administered among adolescent students from six public schools in the Maule Region, Chile, selected in a probabilistic (stratified) fashion. To measure self-perception of physical fitness, a qualitative instrument was developed: the Self-Perception of Physical Fitness Scale (EAPAF, escala de autopercepcion de la aptitud fisica), which is made up of four dimensions and 18 questions. The LMS method (L: Box-Cox coefficient, M: median curve, and S: variation coefficient) was used to establish percentiles and propose references by dimension, age and sex. A total of 3060 adolescents (1702 boys and 1358 girls) aged 11.0 to 18.9 years old were included. The factor analysis evidenced four factors. Saturation values were above 0.40. The percentage of instrument explanation reached 54.24%. In terms of reliability, the 18 questions reflected that Cronbach's alpha was between 0.82 and 0.85. Percentiles (p15, p50 and p85) were developed to classify self-perception of physical fitness by dimension, age and sex. Boys showed higher scores in the self-perception of physical fitness scale when compared to girls (p 〈 0.001). The instrument developed in this study was valid and reliable. In addition, the standards proposed may become a useful tool to classify adolescents in relation to their selfperception of physical fitness. Sociedad Argentina de Pediatría.

Standardized Competencies for Parenteral Nutrition Prescribing: The American Society for Parenteral and Enteral Nutrition Model.

Science.gov (United States)

Guenter, Peggi; Boullata, Joseph I; Ayers, Phil; Gervasio, Jane; Malone, Ainsley; Raymond, Erica; Holcombe, Beverly; Kraft, Michael; Sacks, Gordon; Seres, David

2015-08-01

Parenteral nutrition (PN) provision is complex, as it is a high-alert medication and prone to a variety of potential errors. With changes in clinical practice models and recent federal rulings, the number of PN prescribers may be increasing. Safe prescribing of this therapy requires that competency for prescribers from all disciplines be demonstrated using a standardized process. A standardized model for PN prescribing competency is proposed based on a competency framework, the American Society for Parenteral and Enteral Nutrition (A.S.P.E.N.)-published interdisciplinary core competencies, safe practice recommendations, and clinical guidelines. This framework will guide institutions and agencies in developing and maintaining competency for safe PN prescription by their staff. © 2015 American Society for Parenteral and Enteral Nutrition.

A proposed standard on medical isotope production in fission reactors

International Nuclear Information System (INIS)

Schenter, R. E.; Brown, G. J.; Holden, C. S.

2006-01-01

Authors Robert E. Sehenter, Garry Brown and Charles S. Holden argue that a Standard for 'Medical Isotope Production' is needed. Medical isotopes are becoming major components of application for the diagnosis and treatment of all the major diseases including all forms of cancer, heart disease, arthritis, Alzheimer's, among others. Current nuclear data to perform calculations is incomplete, dated or imprecise or otherwise flawed for many isotopes that could have significant applications in medicine. Improved data files will assist computational analyses to design means and methods for improved isotope production techniques in the fission reactor systems. Initial focus of the Standard is expected to be on neutron cross section and branching data for both fast and thermal reactor systems. Evaluated and reviewed tables giving thermal capture cross sections and resonance integrals for the major target and product medical isotopes would be the expected 'first start' for the 'Standard Working Group'. (authors)

Recording routine forensic mental health evaluations should be a standard of practice in the 21st century.

Science.gov (United States)

Siegel, David M; Kinscherff, Robert

2018-04-25

The standard of practice for forensic interviews in criminal and delinquency cases, other than those conducted as part of brief preliminary screening evaluations or in emergency situations, should include a digital recording requirement. This standard should be adopted because of the greater availability of, and familiarity with, recording technology on the part of mental health professionals, the greater use and proven effectiveness of recording in other contexts of the criminal justice system, and the improvement in court presentation and accuracy of judicial determinations involving forensic assessments that recording will provide. The experience of practitioners with recording since professional associations last studied the issue should be taken into account, as informal data suggest it has been positive. Unfortunately, the legal system is unlikely to prompt this advance without its reconsideration by the forensic mental health professions, because current constitutional jurisprudence does not require recording and effectively makes it contingent upon request by examiners. Forensic evaluators thus have a valuable opportunity to educate the legal system on the utility and importance of this key reform, and so should adopt it as a best practice. Copyright © 2018 John Wiley & Sons, Ltd.

Bioenergy good practice

Energy Technology Data Exchange (ETDEWEB)

Birse, J.; Chambers, K.

2000-07-01

This report gives details of a project to make the Good Practice Guidelines, which were developed to help the UK Bioenergy industry, the national and local governments, and the public, more widely available. Details concerning the designing of a Good Practice Programme, and the proposed codes of Good Practice programme are given, and general relevant good practice guidance documents are discussed. The stakeholder survey and workshop, and the proposed codes of a Good Practice Programme are presented in Annexes. (UK)

Recommendations to standardize preanalytical confounding factors in Alzheimer's and Parkinson's disease cerebrospinal fluid biomarkers

DEFF Research Database (Denmark)

del Campo, Marta; Mollenhauer, Brit; Bertolotto, Antonio

2012-01-01

Early diagnosis of neurodegenerative disorders such as Alzheimer's (AD) or Parkinson's disease (PD) is needed to slow down or halt the disease at the earliest stage. Cerebrospinal fluid (CSF) biomarkers can be a good tool for early diagnosis. However, their use in clinical practice is challenging...... the need to establish standardized operating procedures. Here, we merge two previous consensus guidelines for preanalytical confounding factors in order to achieve one exhaustive guideline updated with new evidence for Aβ42, total tau and phosphorylated tau, and α-synuclein. The proposed standardized...

Compiling standardized information from clinical practice: using content analysis and ICF Linking Rules in a goal-oriented youth rehabilitation program.

Science.gov (United States)

Lustenberger, Nadia A; Prodinger, Birgit; Dorjbal, Delgerjargal; Rubinelli, Sara; Schmitt, Klaus; Scheel-Sailer, Anke

2017-09-23

To illustrate how routinely written narrative admission and discharge reports of a rehabilitation program for eight youths with chronic neurological health conditions can be transformed to the International Classification of Functioning, Disability and Health. First, a qualitative content analysis was conducted by building meaningful units with text segments assigned of the reports to the five elements of the Rehab-Cycle ® : goal; assessment; assignment; intervention; evaluation. Second, the meaningful units were then linked to the ICF using the refined ICF Linking Rules. With the first step of transformation, the emphasis of the narrative reports changed to a process oriented interdisciplinary layout, revealing three thematic blocks of goals: mobility, self-care, mental, and social functions. The linked 95 unique ICF codes could be grouped in clinically meaningful goal-centered ICF codes. Between the two independent linkers, the agreement rate was improved after complementing the rules with additional agreements. The ICF Linking Rules can be used to compile standardized health information from narrative reports if prior structured. The process requires time and expertise. To implement the ICF into common practice, the findings provide the starting point for reporting rehabilitation that builds upon existing practice and adheres to international standards. Implications for Rehabilitation This study provides evidence that routinely collected health information from rehabilitation practice can be transformed to the International Classification of Functioning, Disability and Health by using the "ICF Linking Rules", however, this requires time and expertise. The Rehab-Cycle ® , including assessments, assignments, goal setting, interventions and goal evaluation, serves as feasible framework for structuring this rehabilitation program and ensures that the complexity of local practice is appropriately reflected. The refined "ICF Linking Rules" lead to a standardized

Infection control and practice of standard precautions among healthcare workers in northern Nigeria

Directory of Open Access Journals (Sweden)

O E Amoran

2013-01-01

patients′ care products, 12.6% reported wash their hand before wearing the gloves, 10.7% washed hands after removal of gloves, and 72.4% changed gloves after each patient. Only 3.3% had a sharp disposal system in their various workplaces. Majority (98.6% of the respondents reported that the major reason for noncompliance to universal precautions is the nonavailability of the equipments. There was a statistically significant difference in the practice of standard precaution among those that were exposed to blood products and body fluid compared to those that had not been exposed in the last 6 months (c2 = 3.96, P = 0.03, public healthcare providers when compared to private health workers (c2 = 22.32, P = 0.001, among those working in secondary and tertiary facilities compared to primary healthcare centers (c2 = 14.64, P = 0.001 and urban areas when compared to rural areas (c2 = 4.06, P = 0.02. The only predictor of practice of standard precaution was exposure to blood and body fluid in the last 6 months odds ratio (OR = 4.56 (confidence interval (CI = 1.00-21.28. Conclusions: This study implies that inadequate workers′ knowledge and environment related problems, including the lack of protective materials and other equipments and utilities required to ensure safety of HCWs is a crucial issue that need urgent attention. Institution of a surveillance system for hospital acquired infection to improve consistent use of standard precautions among health workers is recommended in Nigeria and other low income countries in Africa.