WorldWideScience

Sample records for proposed methodology showed

  1. METHODOLOGICAL PROPOSAL FOR CONTAMINATED SOIL RECOVERY

    Directory of Open Access Journals (Sweden)

    José Antonio Fabelo Falcón

    2017-01-01

    Full Text Available The contamination of soils, by different substances and / or products is becoming more extensive throughout the world, its determination, minimization and treatment to reach the recovery of them is a necessity, even though it is not granted the level of importance required by the countries concerned. The objective of this work is to propose a methodology for the recovery of soils with a high degree of efficiency and effectiveness in the selection of procedures, regardless of the types of pollutants and land use once recovered. The methodological proposal involves the stages of diagnosis, characterization, selection of the technology and its technical and economic validation at the laboratory and pilot plant level. Subsequently, the technology of the treatment is designed, along with the elaboration of an objective study of each particular case and an essential economic and technical feasibility analysis for the different scales of the development of the technological process.

  2. Proposed Objective Odor Control Test Methodology for Waste Containment

    Science.gov (United States)

    Vos, Gordon

    2010-01-01

    The Orion Cockpit Working Group has requested that an odor control testing methodology be proposed to evaluate the odor containment effectiveness of waste disposal bags to be flown on the Orion Crew Exploration Vehicle. As a standardized "odor containment" test does not appear to be a matter of record for the project, a new test method is being proposed. This method is based on existing test methods used in industrial hygiene for the evaluation of respirator fit in occupational settings, and takes into consideration peer reviewed documentation of human odor thresholds for standardized contaminates, industry stardnard atmostpheric testing methodologies, and established criteria for laboratory analysis. The proposed methodology is quantitative, though it can readily be complimented with a qualitative subjective assessment. Isoamyl acetate (IAA - also known at isopentyl acetate) is commonly used in respirator fit testing, and there are documented methodologies for both measuring its quantitative airborne concentrations. IAA is a clear, colorless liquid with a banana-like odor, documented detectable smell threshold for humans of 0.025 PPM, and a 15 PPB level of quantation limit.

  3. Cogeneration Power Plants: a Proposed Methodology for Unitary Production Cost

    International Nuclear Information System (INIS)

    Metalli, E.

    2009-01-01

    A new methodology to evaluate unitary energetic production costs in the cogeneration power plants is proposed. This methodology exploits the energy conversion factors fixed by Italian Regulatory Authority for Electricity and Gas. So it allows to settle such unitary costs univocally for a given plant, without assigning them a priori subjective values when there are two or more energy productions at the same time. Moreover the proposed methodology always ensures positive values for these costs, complying with the total generation cost balance equation. [it

  4. Proposal of methodology of tsunami accident sequence analysis induced by earthquake using DQFM methodology

    International Nuclear Information System (INIS)

    Muta, Hitoshi; Muramatsu, Ken

    2017-01-01

    Since the Fukushima-Daiichi nuclear power station accident, the Japanese regulatory body has improved and upgraded the regulation of nuclear power plants, and continuous effort is required to enhance risk management in the mid- to long term. Earthquakes and tsunamis are considered as the most important risks, and the establishment of probabilistic risk assessment (PRA) methodologies for these events is a major issue of current PRA. The Nuclear Regulation Authority (NRA) addressed the PRA methodology for tsunamis induced by earthquakes, which is one of the methodologies that should be enhanced step by step for the improvement and maturity of PRA techniques. The AESJ standard for the procedure of seismic PRA for nuclear power plants in 2015 provides the basic concept of the methodology; however, details of the application to the actual plant PRA model have not been sufficiently provided. This study proposes a detailed PRA methodology for tsunamis induced by earthquakes using the DQFM methodology, which contributes to improving the safety of nuclear power plants. Furthermore, this study also states the issues which need more research. (author)

  5. Discounting in agro-industrial complex. A methodological proposal for risk premium

    Energy Technology Data Exchange (ETDEWEB)

    Marques-Perez, I.; Guaita-Pradas, I.; Pérez-Salas, J.L.

    2017-09-01

    The estimation of the discount rate is decisive for a reliable economic valuation. The discount rate has to be adjusted for the risks related to the company, the sector which the company has its market, and the risks related to the investment project. We present a proposal to incorporate the risk premium to the discount rate. The novelty of the methodology is that difference risk groups according to activity as a factor to adjust the cost of capital to companies. The study applies the methodology to the Agro-Industrial Complex (AIC) in Spain. The AIC is formed by industries that add value to farming production. This sector’s economic success demands financial management techniques that assess risk. The conventional method responds neither to the heterogeneity of the economic activities that make up the AIC, nor to differentiating risk by groups. The proposed methodology distinguishes activity groups in accordance with the NACE (National Code of Economic Activities) and uses net profitability variability to distinguish the risk in each group. Our results demonstrate the various levels of risk per group. The results show that among all the groups that form the AIC there are wide differences between levels of risk; thus, the risk neutral groups present risk levels on the order of 150 times lower than the groups extreme risk levels.

  6. Discounting in agro-industrial complex. A methodological proposal for risk premium

    Directory of Open Access Journals (Sweden)

    Inmaculada Marques-Perez

    2017-04-01

    Full Text Available The estimation of the discount rate is decisive for a reliable economic valuation. The discount rate has to be adjusted for the risks related to the company, the sector which the company has its market, and the risks related to the investment project. We present a proposal to incorporate the risk premium to the discount rate. The novelty of the methodology is that difference risk groups according to activity as a factor to adjust the cost of capital to companies. The study applies the methodology to the Agro-Industrial Complex (AIC in Spain. The AIC is formed by industries that add value to farming production. This sector’s economic success demands financial management techniques that assess risk. The conventional method responds neither to the heterogeneity of the economic activities that make up the AIC, nor to differentiating risk by groups. The proposed methodology distinguishes activity groups in accordance with the NACE (National Code of Economic Activities and uses net profitability variability to distinguish the risk in each group. Our results demonstrate the various levels of risk per group. The results show that among all the groups that form the AIC there are wide differences between levels of risk; thus, the risk neutral groups present risk levels on the order of 150 times lower than the groups extreme risk levels.

  7. Discounting in agro-industrial complex. A methodological proposal for risk premium

    International Nuclear Information System (INIS)

    Marques-Perez, I.; Guaita-Pradas, I.; Pérez-Salas, J.L.

    2017-01-01

    The estimation of the discount rate is decisive for a reliable economic valuation. The discount rate has to be adjusted for the risks related to the company, the sector which the company has its market, and the risks related to the investment project. We present a proposal to incorporate the risk premium to the discount rate. The novelty of the methodology is that difference risk groups according to activity as a factor to adjust the cost of capital to companies. The study applies the methodology to the Agro-Industrial Complex (AIC) in Spain. The AIC is formed by industries that add value to farming production. This sector’s economic success demands financial management techniques that assess risk. The conventional method responds neither to the heterogeneity of the economic activities that make up the AIC, nor to differentiating risk by groups. The proposed methodology distinguishes activity groups in accordance with the NACE (National Code of Economic Activities) and uses net profitability variability to distinguish the risk in each group. Our results demonstrate the various levels of risk per group. The results show that among all the groups that form the AIC there are wide differences between levels of risk; thus, the risk neutral groups present risk levels on the order of 150 times lower than the groups extreme risk levels.

  8. Degradation of light emitting diodes: a proposed methodology

    International Nuclear Information System (INIS)

    Koh, Sau; Vam Driel, Willem; Zhang, G.Q.

    2011-01-01

    Due to their long lifetime and high efficacy, light emitting diodes have the potential to revolutionize the illumination industry. However, self heat and high environmental temperature which will lead to increased junction temperature and degradation due to electrical overstress can shorten the life of the light emitting diode. In this research, a methodology to investigate the degradation of the LED emitter has been proposed. The epoxy lens of the emitter can be modelled using simplified Eyring methods whereas an equation has been proposed for describing the degradation of the LED emitters. (semiconductor devices)

  9. Proposed methodology for completion of scenario analysis for the Basalt Waste Isolation Project

    International Nuclear Information System (INIS)

    Roberds, W.J.; Plum, R.J.; Visca, P.J.

    1984-11-01

    This report presents the methodology to complete an assessment of postclosure performance, considering all credible scenarios, including the nominal case, for a proposed repository for high-level nuclear waste at the Hanford Site, Washington State. The methodology consists of defensible techniques for identifying and screening scenarios, and for then assessing the risks associated with each. The results of the scenario analysis are used to comprehensively determine system performance and/or risk for evaluation of compliance with postclosure performance criteria (10 CFR 60 and 40 CFR 191). In addition to describing the proposed methodology, this report reviews available methodologies for scenario analysis, discusses pertinent performance assessment and uncertainty concepts, advises how to implement the methodology (including the organizational requirements and a description of tasks) and recommends how to use the methodology in guiding future site characterization, analysis, and engineered subsystem design work. 36 refs., 24 figs., 1 tab

  10. A proposed descriptive methodology for environmental geologic (envirogeologic) site characterization

    International Nuclear Information System (INIS)

    Schwarz, D.L.; Snyder, W.S.

    1994-01-01

    We propose a descriptive methodology for use in environmental geologic (envirogeologic) site characterization. The method uses traditional sedimentologic descriptions augmented by environmental data needs, and facies analysis. Most other environmental methodologies for soil and sediment characterization use soil engineering and engineering geology techniques that classify by texture and engineering properties. This technique is inadequate for envirogeologic characterization of sediments. In part, this inadequacy is due to differences in the grain-size between the Unified soil Classification and the Udden-Wentworth scales. Use of the soil grain-size classification could easily cause confusion when attempting to relate descriptions based on this classification to our basic understanding of sedimentary depositional systems. The proposed envirogeologic method uses descriptive parameters to characterize a sediment sample, suggests specific tests on samples for adequate characterization, and provides a guidelines for subsurface facies analysis, based on data retrieved from shallow boreholes, that will allow better predictive models to be developed. This methodology should allow for both a more complete site assessment, and provide sufficient data for selection of the appropriate remediation technology, including bioremediation. 50 refs

  11. Methodological proposal for the definition of improvement strategies in logistics of SME

    Directory of Open Access Journals (Sweden)

    Yeimy Liseth Becerra

    2014-12-01

    Full Text Available A methodological proposal for defining strategies of improvement in logistics of SMEs is presented as a means to fulfill a specific objective of the project Methodological design on storage logistics, acquisition, ownership of information systems and communication for Colombian SMEs, baker subsector, which currently runs the research group SEPRO, of Universidad Nacional of Colombia and supported by Colciencias. The project corresponds to the completion of the last stage of the base project, and aims to implement the corresponding target, raised in the research project that has been developing the research group SEPRO. To do this, it was made a review of the methodology used during the execution of the basic project, as well as the state of the art of techniques used in similar research for the evaluation and definition of breeding strategies in SMEs logistics. Revised techniques were compared and a proposed methodology was configured, which consists of the techniques that represented the greatest advantages for the research development.

  12. Methodological proposal for studying suicide as a complex phenomenon

    Directory of Open Access Journals (Sweden)

    Minayo Maria Cecília de Souza

    2006-01-01

    Full Text Available The authors present a methodological proposal for studying suicide and suicide attempts from a combined socio-anthropological, epidemiological, and psychosocial perspective. This interdisciplinary and complex research model simultaneously examined individual, socioeconomic, historical/cultural, and population data as few studies have succeeded to date. Considering that the present study was conducted in a specific social reality, the authors created a methodological approach to comprehend the effects of a crisis in an industrial restructuring process in a mining company town in the State of Minas Gerais, Brazil, that was associated with unusually high suicide rates. Since it referred to a small geographic area (with only 100,000 inhabitants, the research is considered an ideal case study. The authors created different strategies to trace the local epidemiological profile, adapted a psychosocial autopsy technique to elucidate suicide cases and a psychosocial harm assessment technique to comprehend suicide attempts, and conducted a local analysis of the socio-cultural context. The methods proposed here (with advantages and limitations proved productive for elucidating the study hypothesis.

  13. Modern proposal of methodology for retrieval of characteristic synthetic rainfall hyetographs

    Science.gov (United States)

    Licznar, Paweł; Burszta-Adamiak, Ewa; Łomotowski, Janusz; Stańczyk, Justyna

    2017-11-01

    Modern engineering workshop of designing and modelling complex drainage systems is based on hydrodynamic modelling and has a probabilistic character. Its practical application requires a change regarding rainfall models accepted at the input. Previously used artificial rainfall models of simplified form, e.g. block precipitation or Euler's type II model rainfall are no longer sufficient. It is noticeable that urgent clarification is needed as regards the methodology of standardized rainfall hyetographs that would take into consideration the specifics of local storm rainfall temporal dynamics. The aim of the paper is to present a proposal for innovative methodology for determining standardized rainfall hyetographs, based on statistical processing of the collection of actual local precipitation characteristics. Proposed methodology is based on the classification of standardized rainfall hyetographs with the use of cluster analysis. Its application is presented on the example of selected rain gauges localized in Poland. Synthetic rainfall hyetographs achieved as a final result may be used for hydrodynamic modelling of sewerage systems, including probabilistic detection of necessary capacity of retention reservoirs.

  14. Methodology proposal for estimation of carbon storage in urban green areas

    NARCIS (Netherlands)

    Schröder, C.; Mancosu, E.; Roerink, G.J.

    2013-01-01

    Methodology proposal for estimation of carbon storage in urban green areas; final report. Subtitle: Final report of task Task 262-5-6 "Carbon sequestration in urban green infrastructure" Project manager Marie Cugny-Seguin. Date: 15-10-2013

  15. Methodology Using MELCOR Code to Model Proposed Hazard Scenario

    Energy Technology Data Exchange (ETDEWEB)

    Gavin Hawkley

    2010-07-01

    This study demonstrates a methodology for using the MELCOR code to model a proposed hazard scenario within a building containing radioactive powder, and the subsequent evaluation of a leak path factor (LPF) (or the amount of respirable material which that escapes a facility into the outside environment), implicit in the scenario. This LPF evaluation will analyzes the basis and applicability of an assumed standard multiplication of 0.5 × 0.5 (in which 0.5 represents the amount of material assumed to leave one area and enter another), for calculating an LPF value. The outside release is dependsent upon the ventilation/filtration system, both filtered and un-filtered, and from other pathways from the building, such as doorways (, both open and closed). This study is presents ed to show how the multiple leak path factorsLPFs from the interior building can be evaluated in a combinatory process in which a total leak path factorLPF is calculated, thus addressing the assumed multiplication, and allowing for the designation and assessment of a respirable source term (ST) for later consequence analysis, in which: the propagation of material released into the environmental atmosphere can be modeled and the dose received by a receptor placed downwind can be estimated and the distance adjusted to maintains such exposures as low as reasonably achievableALARA.. Also, this study will briefly addresses particle characteristics thatwhich affect atmospheric particle dispersion, and compares this dispersion with leak path factorLPF methodology.

  16. A methodological proposal for ancient kiln simulation analyzed by Moessbauer spectroscopy

    International Nuclear Information System (INIS)

    Flores, E.; Fernandes, B.; Flores, E.; Fernandez, B.

    1988-01-01

    In previous papers scientistis from different countries have reported simulating incomplete methodologies for ancient kiln firing conditions. Results from clays fired in a first working hypothesis are presented to end as a methodological proposal for simulation. This study was done through Moessbauer spectroscopy. The fired clay used presented a Fe 2+ and Fe 3+ spectrum in octahedric sites. Moessbauer parameters complemented by other studies indicate illite is the predominant clay mineral. A trait of the parameters behaviour in presence of temperature is reported. (author)

  17. A Proposed Methodology for the Conceptualization, Operationalization, and Empirical Validation of the Concept of Information Need

    Science.gov (United States)

    Afzal, Waseem

    2017-01-01

    Introduction: The purpose of this paper is to propose a methodology to conceptualize, operationalize, and empirically validate the concept of information need. Method: The proposed methodology makes use of both qualitative and quantitative perspectives, and includes a broad array of approaches such as literature reviews, expert opinions, focus…

  18. Draft report: a selection methodology for LWR safety R and D programs and proposals

    International Nuclear Information System (INIS)

    Husseiny, A.A.; Ritzman, R.L.

    1980-03-01

    The results of work done to develop a methodology for selecting LWR safety R and D programs and proposals is described. A critical survey of relevant decision analysis methods is provided including the specifics of multiattribute utility theory. This latter method forms the basis of the developed selection methodology. Details of the methodology and its use are provided along with a sample illustration of its application

  19. Draft report: a selection methodology for LWR safety R and D programs and proposals

    Energy Technology Data Exchange (ETDEWEB)

    Husseiny, A. A.; Ritzman, R. L.

    1980-03-01

    The results of work done to develop a methodology for selecting LWR safety R and D programs and proposals is described. A critical survey of relevant decision analysis methods is provided including the specifics of multiattribute utility theory. This latter method forms the basis of the developed selection methodology. Details of the methodology and its use are provided along with a sample illustration of its application.

  20. Full cost accounting in the analysis of separated waste collection efficiency: A methodological proposal.

    Science.gov (United States)

    D'Onza, Giuseppe; Greco, Giulio; Allegrini, Marco

    2016-02-01

    Recycling implies additional costs for separated municipal solid waste (MSW) collection. The aim of the present study is to propose and implement a management tool - the full cost accounting (FCA) method - to calculate the full collection costs of different types of waste. Our analysis aims for a better understanding of the difficulties of putting FCA into practice in the MSW sector. We propose a FCA methodology that uses standard cost and actual quantities to calculate the collection costs of separate and undifferentiated waste. Our methodology allows cost efficiency analysis and benchmarking, overcoming problems related to firm-specific accounting choices, earnings management policies and purchase policies. Our methodology allows benchmarking and variance analysis that can be used to identify the causes of off-standards performance and guide managers to deploy resources more efficiently. Our methodology can be implemented by companies lacking a sophisticated management accounting system. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. A proposed methodology for computational fluid dynamics code verification, calibration, and validation

    Science.gov (United States)

    Aeschliman, D. P.; Oberkampf, W. L.; Blottner, F. G.

    Verification, calibration, and validation (VCV) of Computational Fluid Dynamics (CFD) codes is an essential element of the code development process. The exact manner in which code VCV activities are planned and conducted, however, is critically important. It is suggested that the way in which code validation, in particular, is often conducted--by comparison to published experimental data obtained for other purposes--is in general difficult and unsatisfactory, and that a different approach is required. This paper describes a proposed methodology for CFD code VCV that meets the technical requirements and is philosophically consistent with code development needs. The proposed methodology stresses teamwork and cooperation between code developers and experimentalists throughout the VCV process, and takes advantage of certain synergisms between CFD and experiment. A novel approach to uncertainty analysis is described which can both distinguish between and quantify various types of experimental error, and whose attributes are used to help define an appropriate experimental design for code VCV experiments. The methodology is demonstrated with an example of laminar, hypersonic, near perfect gas, 3-dimensional flow over a sliced sphere/cone of varying geometrical complexity.

  2. Methodological proposal for the construction of a ranking of issuers in the colombian stock market

    Directory of Open Access Journals (Sweden)

    José Armando Hernández

    2012-07-01

    Full Text Available This paper presents the development and evolution of financial theories associated with the valuation methods. It evaluates the market performance of the shares that meet certain methodological conditions and which are part of the IGBC, COLCAP and COL20 baskets, taking into account the approaches of Modigliani and Miller, Markowitz, Sharpe, Damodaran, among others. It also describes methods for the assessment of companies based on financial statements such as balance sheets, financial statements and cash flows. The proposed methodology involves the development of two matrices: one shows a diagnosis through risk analysis and the performance of the shares under study; another examines the formation of the capital structure as well as its expected return. Finally, a ranking is constructed based on the diagnosis of the market and the capital structure of the companies that issue the shares.

  3. Proposal of inspection methodology for environment radiological control

    International Nuclear Information System (INIS)

    Martins, Nadia Soido Falcao

    2005-01-01

    The Radiation Protection and Dosimetry Institute (IRD) of the Brazilian Nuclear Energy Commission (CNEN) is in charge of verifying that the self-monitoring operator is effective to control the radiological quality of environmental around the nuclear facilities and carried out in accordance with the regulatory requirements. While a long time, the verification of compliance was kept by the conduction of large scale monitoring programs around all the authorized installations. The IRD decided to reformulate its performance behavior, starting another kind of control program, due to the number increase of nuclear installations and the diversity of activities conducted by the operators. This program, so-called Monitoring Control Program (PCM) is a regulatory activity developed by the Environmental Impact Assessment Service (SEAIA) of IRD and has the aim of check the effectiveness of authorized self-control. Actually the regulatory control of environmental radiological integrity around the authorized nuclear installation essentially depends on the effectiveness of regulatory inspections fulfilled by the SEAIA/IRD. Due to the implementation of modern practices of management in the IRD, specially the quality management system on regulatory inspection activities, emerged the need of unify these actions. It was also necessary to establish standard procedures required for inspection conduction. This work proposes one methodology for the inspections of environmental radiological control suitable to assure the compliance and effectiveness of environmental and effluent monitoring programs conducted by the operator, through the systematic verification of compliance and data quality assessment. The proposed methodology seeks to attend the appeals for high control standards of environment protection and public health. Here, we presented as products of this work: The inspection handbook and checklists for inspections; one framework for sampling, handling, recording and reporting of

  4. Methodological Proposal for Optimal Location of Emergency Operation Centers through Multi-Criteria Approach

    Directory of Open Access Journals (Sweden)

    Umberto Di Matteo

    2016-01-01

    Full Text Available Territorial vulnerability and risk analysis play a fundamental role in urban planning and emergency management. Requirements analysis of such aspects are possible to define more and more effective risk mitigation strategies providing efficient response plans to events. Many mitigation strategies as well as many response plans have in common the purpose of minimizing response time in order to decrease the level of vulnerability of the concerning area. The response time to a perturbing event is in fact an essential parameter to define the hazard of the considered site and literature is unanimous in considering it. In this context, the article proposes a methodology for the optimization of the location on the territory of emergency operation centers (EOCs, reducing response times and mitigating in this way the vulnerability of the area. The proposed methodology is based on a multi-criteria decision making (MCDM hybrid type AHP (Analytic Hierarchy Process-Electre. This method has been applied in the territory of Bressanone and Vipiteno (Bolzano-Italy, simulating the need to build a new barrack of Fire Department. A campaign of interviews with operators and industry experts and the collection of spatial data from the portals of the concerned authorities has been carried out in order to get the number of necessary data for the implementation of the proposed methodology.

  5. Proposed methodology for completion of scenario analysis for the Basalt Waste Isolation Project. [Assessment of post-closure performance for a proposed repository for high-level nuclear waste

    Energy Technology Data Exchange (ETDEWEB)

    Roberds, W.J.; Plum, R.J.; Visca, P.J.

    1984-11-01

    This report presents the methodology to complete an assessment of postclosure performance, considering all credible scenarios, including the nominal case, for a proposed repository for high-level nuclear waste at the Hanford Site, Washington State. The methodology consists of defensible techniques for identifying and screening scenarios, and for then assessing the risks associated with each. The results of the scenario analysis are used to comprehensively determine system performance and/or risk for evaluation of compliance with postclosure performance criteria (10 CFR 60 and 40 CFR 191). In addition to describing the proposed methodology, this report reviews available methodologies for scenario analysis, discusses pertinent performance assessment and uncertainty concepts, advises how to implement the methodology (including the organizational requirements and a description of tasks) and recommends how to use the methodology in guiding future site characterization, analysis, and engineered subsystem design work. 36 refs., 24 figs., 1 tab.

  6. The challenges facing ethnographic design research: A proposed methodological solution

    DEFF Research Database (Denmark)

    Cash, Philip; Hicks, Ben; Culley, Steve

    2009-01-01

    Central to improving and maintaining high levels of performance in emerging ethnographic design research is a fundamental requirement to address some of the problems associated with the subject. In particular seven core issues are identified and include the complexity of test development......, variability of methods, resource intensiveness, subjectivity, comparability, common metrics and industrial acceptance. To address these problems this paper describes a structured methodological approach in which three main areas are proposed, the modularisation of the research process, the standardisation...... of the dataset and the stratification of the research context. The paper then examines the fundamental requirements of this scheme and how these relate to a Design Observatory approach. Following this, the proposed solution is related back to the initial problem set and potential issues are discussed. Finally...

  7. EMS and process of identification and evaluation of environmental aspects: a proposal methodology

    International Nuclear Information System (INIS)

    Perotto, E.

    2006-01-01

    The Environmental Management System (EMS) is an instrument to manage the interaction between the organization and the environment. The scope od EMS is to reduce the environmental impact and to achieve improvements in overall performances. In particular, the focus point of EMS implementation is the method for identifying and assessing significant environmental aspects. The results of the literature and regulation reviews (Perotto 2006) have shown that rigourous repeatable and transparent methodologies do not exist. This paper presents a proposal method for identifying and assessing significant environmental aspects, that has all three of these important characteristics. In particular, the proposal methodology for assessing aspects is based on some criteria that are combined in a specific algorithm. It is important to specify that to make a correct application of the method a preliminary rigorous approach to investigating the environment and the activities of organizations is necessary [it

  8. EDUCATIONAL COACHING: A METHODOLOGICAL PROPOSAL TO INNOVATE IN THE CLASSROOM

    Directory of Open Access Journals (Sweden)

    Ofelia Arzate O.

    2013-09-01

    Full Text Available The purpose of the present research is to present an innovative proposal for the development of the classroom work, applying coaching as a method to strengthen generic competence in students of the degree in primary education, by investigation-action methodology managed to carry out a reflection on practice to implement strategies that directly impacted on the students academic performance, strategies are evaluated through an assessment of own 360o to assess skills such as: Collaborates with others to generate innovative projects and social impact, uses his creative and critical thinking, learns permanently, and uses of information and communication technologies, results allow us to observe that the students were able to improve their academic performance to achieve the goal proposed at the beginning of the course of 8.0, on the other hand the competence favored achieving a breakthrough of 7.01 percent in one semester which allows us to conclude that educational coaching is an excellent proposal that allows the development of skills in the learner.

  9. Selection methodology for LWR safety programs and proposals. Volume 2. Methodology application

    International Nuclear Information System (INIS)

    Ritzman, R.L.; Husseiny, A.A.

    1980-08-01

    The results of work done to update and apply a methodology for selecting (prioritizing) LWR safety technology R and D programs are described. The methodology is based on multiattribute utility (MAU) theory. Application of the methodology to rank-order a group of specific R and D programs included development of a complete set of attribute utility functions, specification of individual attribute scaling constants, and refinement and use of an interactive computer program (MAUP) to process decision-maker inputs and generate overall (multiattribute) program utility values. The output results from several decision-makers are examined for consistency and conclusions and recommendations regarding general use of the methodology are presented. 3 figures, 18 tables

  10. The audit of social administration (AGSC. Methodological proposal for its application in cooperative companies

    Directory of Open Access Journals (Sweden)

    Leonardo Ojeda Mesa

    2014-06-01

    This article explains the bases for a methodology proposal that facilitates the execution of Social Administration Audits (AGS in cooperative companies, with the objective of evaluating the administration that they develop  the same social order.

  11. Methodology proposal for matrices selection for hazardous wastes stabilization

    International Nuclear Information System (INIS)

    Silva, Eliane Magalhaes Pereira da; Vasconcelos, Vanderley de; Jordao, Elizabete

    2002-01-01

    The issues of environmental pollution by solid waste arised with the onset of the industrial era. Coping with these issues has been even worsen due to the lack of consciousness and planning for a sound waste management. In addition, most of the companies have found it difficult to keep themselves competitive in a global economy due to the lack of information and by not having access to waste management new technologies. On the other hand, solidification/stabilization technologies are usual practices in the nuclear industry. The aim of this paper is to present a proposal to the development of a methodology, for selection of immobilization binders for hazardous waste, based on the available technologies in the nuclear industry. (author)

  12. Proposal of risk evaluation methodology for hazardous materials transportation

    International Nuclear Information System (INIS)

    Hartman, Luiz Carlos

    2009-01-01

    The increasing concern with the level of risk associated with the transportation of hazardous materials took some international institutions to pledge efforts in the evaluation of risk in regional level. Following this trend, the objective of this work was to analyze the most recent processes of analysis of risks from road transportation of hazardous materials. In the present work 21 methodologies of analysis of risks, developed by some authors and for diverse localities have been evaluated. Two of them, in special, have been reviewed and discussed: a method recently developed by the Swiss Federal Institute of Technology (Nicolet-Monnier and Gheorghe, 1996) and the strategy delineated by the Center for Chemical Process Safety CCPS (1995), taking into consideration the estimate of the individual and social risk. Also, the models of Harwood et al. (1990) and of Ramos (1997), adapted by Hartman (2003) have been applied to the reality of the roads of the state of Sao Paulo. The extension of these methodologies was explored, in order to find its advantages and disadvantages. As a study case the present work considered the ammonia transportation throughout two routes evaluating the reality of the roads of the state of Sao Paulo, including a significant parcel of evaluation in a densely populated area, getting the results using risk, at least, one of the methodologies mentioned above. The innovation proposed by this work was the research, the development and the introduction of two variables to the model considered by Harwood et al. (1990). These variables that influence in the value of the risk are: the age of the driver of truck and the zone of impact that is function type of product, period of the day where the transport was carried and the volume that has been transported. The aim of the proposed modifications is to let the value of the risk more sensible in relation to the type of the product carried and the age of the truck driver. The main related procedural stages

  13. Rethinking Over Textuality of Digital Image: A Methodological Proposal for Pleasant Reading on Digital Screens

    Directory of Open Access Journals (Sweden)

    Cristian Álvarez

    2009-12-01

    Full Text Available It sets out the necessity about thinking over the instructional function of image in digital world under the light of the new opportunities of a methodological proposal to read as a game. First, for this reason it exams the perceptions of García Canclini about the reading of university students, and its problems on the context of new technologies: accumulation of information versus weakening of reflection. To this situation it adds the no appreciation of visual images. Faced with this problematic situation, and with the aim of sketching out options, it analyzes two experiences about books: the “tasty” reading of texts (the “good reading”, and the potentialities presented in the essential characteristics of playing. So, it proposes a methodology shaped for five steps to read images on digital screen. Its aim is seizing the possibilities of “good reading” to expand the comprehension of the visual information perceived through the screen. The proposal puts the accent in the textuality of representational surface of an image. Also it brings the attentive visual route about in order to enable to identify both significant forms and spaces. This proposal is illustrated with examples.

  14. Proposal of a method for evaluating tsunami risk using response-surface methodology

    Science.gov (United States)

    Fukutani, Y.

    2017-12-01

    Information on probabilistic tsunami inundation hazards is needed to define and evaluate tsunami risk. Several methods for calculating these hazards have been proposed (e.g. Løvholt et al. (2012), Thio (2012), Fukutani et al. (2014), Goda et al. (2015)). However, these methods are inefficient, and their calculation cost is high, since they require multiple tsunami numerical simulations, therefore lacking versatility. In this study, we proposed a simpler method for tsunami risk evaluation using response-surface methodology. Kotani et al. (2016) proposed an evaluation method for the probabilistic distribution of tsunami wave-height using a response-surface methodology. We expanded their study and developed a probabilistic distribution of tsunami inundation depth. We set the depth (x1) and the slip (x2) of an earthquake fault as explanatory variables and tsunami inundation depth (y) as an object variable. Subsequently, tsunami risk could be evaluated by conducting a Monte Carlo simulation, assuming that the generation probability of an earthquake follows a Poisson distribution, the probability distribution of tsunami inundation depth follows the distribution derived from a response-surface, and the damage probability of a target follows a log normal distribution. We applied the proposed method to a wood building located on the coast of Tokyo Bay. We implemented a regression analysis based on the results of 25 tsunami numerical calculations and developed a response-surface, which was defined as y=ax1+bx2+c (a:0.2615, b:3.1763, c=-1.1802). We assumed proper probabilistic distribution for earthquake generation, inundation height, and vulnerability. Based on these probabilistic distributions, we conducted Monte Carlo simulations of 1,000,000 years. We clarified that the expected damage probability of the studied wood building is 22.5%, assuming that an earthquake occurs. The proposed method is therefore a useful and simple way to evaluate tsunami risk using a response

  15. Methodological aspects of clinical trials in tinnitus: A proposal for an international standard

    Science.gov (United States)

    Landgrebe, Michael; Azevedo, Andréia; Baguley, David; Bauer, Carol; Cacace, Anthony; Coelho, Claudia; Dornhoffer, John; Figueiredo, Ricardo; Flor, Herta; Hajak, Goeran; van de Heyning, Paul; Hiller, Wolfgang; Khedr, Eman; Kleinjung, Tobias; Koller, Michael; Lainez, Jose Miguel; Londero, Alain; Martin, William H.; Mennemeier, Mark; Piccirillo, Jay; De Ridder, Dirk; Rupprecht, Rainer; Searchfield, Grant; Vanneste, Sven; Zeman, Florian; Langguth, Berthold

    2013-01-01

    Chronic tinnitus is a common condition with a high burden of disease. While many different treatments are used in clinical practice, the evidence for the efficacy of these treatments is low and the variance of treatment response between individuals is high. This is most likely due to the great heterogeneity of tinnitus with respect to clinical features as well as underlying pathophysiological mechanisms. There is a clear need to find effective treatment options in tinnitus, however, clinical trials differ substantially with respect to methodological quality and design. Consequently, the conclusions that can be derived from these studies are limited and jeopardize comparison between studies. Here, we discuss our view of the most important aspects of trial design in clinical studies in tinnitus and make suggestions for an international methodological standard in tinnitus trials. We hope that the proposed methodological standard will stimulate scientific discussion and will help to improve the quality of trials in tinnitus. PMID:22789414

  16. Measuring political polarization: Twitter shows the two sides of Venezuela

    Science.gov (United States)

    Morales, A. J.; Borondo, J.; Losada, J. C.; Benito, R. M.

    2015-03-01

    We say that a population is perfectly polarized when divided in two groups of the same size and opposite opinions. In this paper, we propose a methodology to study and measure the emergence of polarization from social interactions. We begin by proposing a model to estimate opinions in which a minority of influential individuals propagate their opinions through a social network. The result of the model is an opinion probability density function. Next, we propose an index to quantify the extent to which the resulting distribution is polarized. Finally, we apply the proposed methodology to a Twitter conversation about the late Venezuelan president, Hugo Chávez, finding a good agreement between our results and offline data. Hence, we show that our methodology can detect different degrees of polarization, depending on the structure of the network.

  17. 76 FR 54216 - Pacific Fishery Management Council (Council); Work Session To Review Proposed Salmon Methodology...

    Science.gov (United States)

    2011-08-31

    ... Fishery Management Council (Council); Work Session To Review Proposed Salmon Methodology Changes AGENCY.... ACTION: Notice of a public meeting. SUMMARY: The Pacific Fishery Management Council's Salmon Technical Team (STT), Scientific and Statistical Committee (SSC) Salmon Subcommittee, and Model Evaluation...

  18. Functions of the digital image in Education: A methodological proposal for reading and writing the digital image on instructional screens

    Directory of Open Access Journals (Sweden)

    Mariella Milagros Azzato

    2011-07-01

    Full Text Available This research goes through the instructional possibilities that reading and writing the digital image have in Education. Along these lines, we are presenting this research that looks for, on one hand, to develop a methodological proposal for reading and writing the digital image, and on the other, to implement these methodologies in a course used as a study case and whose objective was to evaluate students' performance when writing screens for a learning object using the methodologies for reading and writing the digital image. The process for compiling date was based on the questionnaire technique, individual interviews and the analysis of course proposed activities. The application of the first questionnaire allowed us to determine students' knowledge level about the digital image before starting the course. The individual interview allowed us to determine the students' reading criteria gained after using the reading methodology for the digital image to analyse educational materials (Galavis, 2008; Azzato, 2009. The proposed activities for the course permitted us to value students' performance when reading and writing the digital image of a learning object. Finally, after course completion, the second questionnaire was applied in order to determine the students' acquired knowledge level about reading and writing an image on digital screens. The results obtained in each of the analysis allowed us to establish that the proposed methodologies were highly useful to write the educational image for the screens of each one of the learning objects created in the course.

  19. Methodological proposal for the jotted issue of the first epoch of the Hero magazine.

    Directory of Open Access Journals (Sweden)

    Maité García Díaz

    2013-07-01

    Full Text Available During the neocolonial republic emerges in Sancti Spiritus a very significative magazine of artistic, literary and scientific sketch: Hero, founded by Jacinto Gomer Fernández-Morera and Anastacio Fernández-Morera del Castillo, it first appeared on December 20th 1907. This issue constitutes a vivid reflect of the commercial, literary, cultural, scientific and historic panorama and above all, of the life of the middle and high class in Sancti Spiritus at the beginning of the XX century. The need to divulge the advantage the texts of Hero constitute for the high school and university students, also to humanistic profile graduates and others, such as investigators, evidenced the need to carry out an investigation that pursued such purposes. That’s why the methodological proposal for the jotted issue of the first epoch of the Hero magazine (1907-1908 takes place, composed by 38 publications, departing from the fundamental theorizations about the jotted issue of the presentation of the methodological proposal on behalf of updating these publication texts for its potential readers.

  20. Proposal of a calculation methodology for the preliminary design of a coalescing filter

    International Nuclear Information System (INIS)

    Gonzalez Dobrosky, Cintia

    2015-01-01

    Coalescing filters are described which are equipments for capture and recovery of mist most efficient, inexpensive and have fewer limitations of application. The operation, equations and ideal characteristics of filter media of these models are explained. A methodology for design and scale-up of this type of equipment for liquid recovery in gaseous currents is proposed from experimental tests, in order to guide the interested reader in its making. (author) [es

  1. Proposed systematic methodology for analysis of Pb-210 radioactivity in residues produced in Brazilian natural gas pipes

    International Nuclear Information System (INIS)

    Ferreira, Aloisio Cordilha

    2003-11-01

    Since the 80's, the potential radiological hazards due to the handling of solid wastes contaminated with Rn-222 long-lived progeny - Pb-210 in special - produced in gas pipes and removed by pig operations have been subject of growing concern abroad our country. Nevertheless, little or no attention has been paid to this matter in the Brazilian plants up to now, being these hazards frequently underestimated or even ignored. The main purpose of this work was to propose a systematic methodology for analysis of Pb-210 radioactivity in black powder samples from some Brazilian plants, through the evaluation of direct Pb-210 gamma spectrometry and Bi-210 beta counting technical viabilities. In both cases, one in five samples of black powder analysed showed relevant activity (above 1Bq/kg) of Pb-210, being these results probably related to particular features of each specific plant (production levels, reservoir geochemical profile, etc.), in such a way that a single pattern is not observed. For the proposed methodology, gamma spectrometry proved to be the most reliable technique, showing a 3.5% standard deviation, and, for a 95% confidence level, overall fitness in the range of Pb-210 concentration of activity presented in the standard sample reference sheet, provided by IAEA for intercomparison purposes. In the Brazilian scene, however, the availability of statistically supported evidences is insufficient to allow the potential radiological hazard due to the management of black powder to be discarded. Thus, further research efforts are recommended in order to detect the eventually critical regions or plants where gas exploration, production and processing practices will require a regular program of radiological surveillance, in the near future. (author)

  2. A proposed approach to backfit decision-making using risk assessment and benefit-cost methodology

    International Nuclear Information System (INIS)

    O'Donnell, E.P.; Raney, T.J.

    1984-01-01

    This paper outlines a proposed approach to backfit decision-making which utilizes quantitative risk assessment techniques, benefit-cost methodology and decision criteria. In general terms, it is structured to provide an objective framework for decision-making aimed at ensuring a positive return on backfit investment while allowing for inclusion of subjective value judgments by the decision-maker. The distributions of the independent variables are combined to arrive at an overall probability distribution for the benefit-cost ratio. In this way, the decision-maker can explicitly establish the probability or level of confidence that a particular backfit will yield benefits in excess of cost. An example is presented demonstrating the application of methodology to a specific plant backfit. (orig.)

  3. Structural mapping from MSS-LANDSAT imagery: A proposed methodology for international geological correlation studies

    Science.gov (United States)

    Dejesusparada, N. (Principal Investigator); Crepani, E.; Martini, P. R.

    1980-01-01

    A methodology is proposed for international geological correlation studies based on LANDSAT-MSS imagery, Bullard's model of continental fit and compatible structural trends between Northeast Brazil and the West African counterpart. Six extensive lineaments in the Brazilian study area are mapped and discussed according to their regional behavior and in relation to the adjacent continental margin. Among the first conclusions, correlations were found between the Sobral Pedro II Lineament and the megafaults that surround the West African craton; and the Pernambuco Lineament with the Ngaurandere Linemanet in Cameroon. Ongoing research to complete the methodological stages includes the mapping of the West African structural framework, reconstruction of the pre-drift puzzle, and an analysis of the counterpart correlations.

  4. From systems biology to dynamical neuropharmacology: proposal for a new methodology.

    Science.gov (United States)

    Erdi, P; Kiss, T; Tóth, J; Ujfalussy, B; Zalányi, L

    2006-07-01

    The concepts and methods of systems biology are extended to neuropharmacology in order to test and design drugs for the treatment of neurological and psychiatric disorders. Computational modelling by integrating compartmental neural modelling techniques and detailed kinetic descriptions of pharmacological modulation of transmitter-receptor interaction is offered as a method to test the electrophysiological and behavioural effects of putative drugs. Even more, an inverse method is suggested as a method for controlling a neural system to realise a prescribed temporal pattern. In particular, as an application of the proposed new methodology, a computational platform is offered to analyse the generation and pharmacological modulation of theta rhythm related to anxiety.

  5. A methodology for enhancing implementation science proposals: comparison of face-to-face versus virtual workshops.

    Science.gov (United States)

    Marriott, Brigid R; Rodriguez, Allison L; Landes, Sara J; Lewis, Cara C; Comtois, Katherine A

    2016-05-06

    With the current funding climate and need for advancements in implementation science, there is a growing demand for grantsmanship workshops to increase the quality and rigor of proposals. A group-based implementation science-focused grantsmanship workshop, the Implementation Development Workshop (IDW), is one methodology to address this need. This manuscript provides an overview of the IDW structure, format, and findings regarding its utility. The IDW methodology allows researchers to vet projects in the proposal stage in a structured format with a facilitator and two types of expert participants: presenters and attendees. The presenter uses a one-page handout and verbal presentation to present their proposal and questions. The facilitator elicits feedback from attendees using a format designed to maximize the number of unique points made. After each IDW, participants completed an anonymous survey assessing perceptions of the IDW. Presenters completed a funding survey measuring grant submission and funding success. Qualitative interviews were conducted with a subset of participants who participated in both delivery formats. Mixed method analyses were performed to evaluate the effectiveness and acceptability of the IDW and compare the delivery formats. Of those who participated in an IDW (N = 72), 40 participated in face-to-face only, 16 in virtual only, and 16 in both formats. Thirty-eight (face-to-face n = 12, 35 % response rate; virtual n = 26, 66.7 % response rate) responded to the surveys and seven (15.3 % response rate), who had attended both formats, completed an interview. Of 36 total presenters, 17 (face-to-face n = 12, 42.9 % response rate; virtual n = 5, 62.9 % response rate) responded to the funding survey. Mixed method analyses indicated that the IDW was effective for collaboration and growth, effective for enhancing success in obtaining grants, and acceptable. A third (35.3 %) of presenters ultimately received funding for their proposal, and more than

  6. A Methodology Proposal to Calculate the Externalities of Liquid Biofuels

    Energy Technology Data Exchange (ETDEWEB)

    Galan, A.; Gonzalez, R.; Varela, M. [Ciemat. Madrid (Spain)

    1999-05-01

    The aim of the survey is to propose a methodology to calculate the externalities associated with the liquid bio fuels cycle. The report defines the externalities from a theoretical point of view and classifies them. The reasons to value the externalities are explained as well as the existing methods. Furthermore, an evaluation of specific environmental and non-environmental externalities is also presented. The report reviews the current situation of the transport sector, considering its environmental effects and impacts. The progress made by the ExternE and ExternE-transport projects related the externalities of transport sector is assessed. Finally, the report analyses the existence of different economic instruments to internalize the external effects of the transport sector as well as other aspects of this internalization. (Author) 58 refs.

  7. Proposal of a Methodology for Implementing a Service-Oriented Architecture in Distributed Manufacturing Systems

    Science.gov (United States)

    Medina, I.; Garcia-Dominguez, A.; Aguayo, F.; Sevilla, L.; Marcos, M.

    2009-11-01

    As envisioned by Intelligent Manufacturing Systems (IMS), Next Generation Manufacturing Systems (NGMS) will satisfy the needs of an increasingly fast-paced and demanding market by dynamically integrating systems from inside and outside the manufacturing firm itself into a so-called extended enterprise. However, organizing these systems to ensure the maximum flexibility and interoperability with those from other organizations is difficult. Additionally, a defect in the system would have a great impact: it would affect not only its owner, but also its partners. For these reasons, we argue that a service-oriented architecture (SOA) would be a good candidate. It should be designed following a methodology where services play a central role, instead of being an implementation detail. In order for the architecture to be reliable enough as a whole, the methodology will need to help find errors before they arise in a production environment. In this paper we propose using SOA-specific testing techniques, compare some of the existing methodologies and outline several extensions upon one of them to integrate testing techniques.

  8. Proposal of a Methodology of Stakeholder Analysis for the Brazilian Satellite Space Program

    Directory of Open Access Journals (Sweden)

    Mônica Elizabeth Rocha de Oliveira

    2012-03-01

    Full Text Available To ensure the continuity and growth of space activities in Brazil, it is fundamental to persuade the Brazilian society and its representatives in Government about the importance of investments in space activities. Also, it is important to convince talented professionals to place space activities as an object of their interest; the best schools should also be convinced to offer courses related to the space sector; finally, innovative companies should be convinced to take part in space sector activities, looking to returns, mainly in terms of market differentiation and qualification, as a path to take part in high-technology and high-complexity projects. On the one hand, this process of convincing or, more importantly, committing these actors to space activities, implies a thorough understanding of their expectations and needs, in order to plan how the system/organization can meet them. On the other hand, if stakeholders understand how much they can benefit from this relationship, their consequent commitment will very much strengthen the action of the system/organization. With this framework in perspective, this paper proposes a methodology of stakeholder analysis for the Brazilian satellite space program. In the exercise developed in the article, stakeholders have been identified from a study of the legal framework of the Brazilian space program. Subsequently, the proposed methodology has been applied to the planning of actions by a public organization.

  9. Social Life Cycle Assessment of a Concentrated Solar Power Plant in Spain: A Methodological Proposal

    DEFF Research Database (Denmark)

    Corona, Blanca; Bozhilova-Kisheva, Kossara Petrova; Olsen, Stig Irving

    2017-01-01

    of sustainability, namely, economy, environment, and society. Social life cycle assessment (S-LCA) is a novel methodology still under development, used to cover the social aspects of sustainability within LCSA. The aim of this article is to provide additional discussion on the practical application of S...... generation in a concentrated solar power plant in Spain. The inventory phase was completed by using the indicators proposed by the United Nations Environment Program/Society for Environmental Toxicology and Chemistry (UNEP/SETAC) Guidelines on S-LCA. The impact assessment phase was approached by developing...... a social performance indicator that builds on performance reference points, an activity variable, and a numeric scale with positive and negative values. The social performance indicator obtained (+0.42 over a range of –2 to +2) shows that the deployment of the solar power plant increases the social welfare...

  10. Proposal of an Embedded Methodology that uses Organizational Diagnosis and Reengineering: Case of bamboo panel company

    Directory of Open Access Journals (Sweden)

    Eva Selene Hernández Gress

    2017-08-01

    Full Text Available This work is an extension of the Proceedings of the International Conference on Industrial Engineering, Management Science and Applications, which presented some of the phases of Reengineering applied to Bamboo Panel Company; the results were Strategic planning, Systemic Diagnosis and Performance Indicators through the Balanced Scorecard. Now, the main purpose of this article is to present a methodology that embedding Organizational Diagnosis and Reengineering, which emphasizes the incorporation of culture, context, management style, and knowledge as well as inner and outer actors. The results of the proposed methodology applied to the case study are included, up to the moment of the writing of this article. Future work consists on the development of strategies for Innovation as a strategy planned in the Balanced Scorecard and derived from the embedded methodology.

  11. Proposal for an Experimental Methodology for Evaluation of Natural Lighting Systems Applied in Buildings

    Directory of Open Access Journals (Sweden)

    Anderson Diogo Spacek

    2017-07-01

    Full Text Available This work has the objective of developing a methodology for the evaluation of indoor natural lighting systems, which, with speed and practicality, provides from real conditions of use a reliable result about the quality and performance of the proposed system. The methodology is based on the construction of two real-size test environments, which will be subjected to a natural light system through reflexive tubes made from recycled material, and to a commercial system already certified and consolidated, creating the possibility of comparison. Furthermore, the data acquired in the test environments will be examined in light of the values of solar radiation obtained from a digital meteorological station, such that it is possible to stipulate the lighting capacity of the systems at different times of the year.

  12. Work-related stress risk assessment in Italy: a methodological proposal adapted to regulatory guidelines.

    Science.gov (United States)

    Persechino, Benedetta; Valenti, Antonio; Ronchetti, Matteo; Rondinone, Bruna Maria; Di Tecco, Cristina; Vitali, Sara; Iavicoli, Sergio

    2013-06-01

    Work-related stress is one of the major causes of occupational ill health. In line with the regulatory framework on occupational health and safety (OSH), adequate models for assessing and managing risk need to be identified so as to minimize the impact of this stress not only on workers' health, but also on productivity. After close analysis of the Italian and European reference regulatory framework and work-related stress assessment and management models used in some European countries, we adopted the UK Health and Safety Executive's (HSE) Management Standards (MS) approach, adapting it to the Italian context in order to provide a suitable methodological proposal for Italy. We have developed a work-related stress risk assessment strategy, meeting regulatory requirements, now available on a specific web platform that includes software, tutorials, and other tools to assist companies in their assessments. This methodological proposal is new on the Italian work-related stress risk assessment scene. Besides providing an evaluation approach using scientifically validated instruments, it ensures the active participation of occupational health professionals in each company. The assessment tools provided enable companies not only to comply with the law, but also to contribute to a database for monitoring and assessment and give access to a reserved area for data analysis and comparisons.

  13. Life-cycle energy optimisation : A proposed methodology for integrating environmental considerations early in the vehicle engineering design process

    OpenAIRE

    O'Reilly, Ciarán J.; Göransson, Peter; Funazaki, Atsushi; Suzuki, Tetsuya; Edlund, Stefan; Gunnarsson, Cecilia; Lundow, Jan-Olov; Cerin, Pontus; Cameron, Christopher J.; Wennhage, Per; Potting, José

    2016-01-01

    To enable the consideration of life cycle environmental impacts in the early stages of vehicle design, a methodology using the proxy of life cycle energy is proposed in this paper. The trade-offs in energy between vehicle production, operational performance and end-of-life are formulated as a mathematical problem, and simultaneously balanced with other transport-related functionalities, and may be optimised. The methodology is illustrated through an example design study, which is deliberately...

  14. Mining in urban areas: methodological proposal for the identification and mediation of socio-environmental conflicts

    OpenAIRE

    Bacci,Denise de La Corte; Diniz,Tânia Maria Ramos de Godoi

    2013-01-01

    The conflicts generated by mining in urban areas are due to several reasons. In this paper we sought to identify the social actors and the dynamics of conflicts in the northwestern region of the São Paulo Municipality. This area presents aspects of environmental preservation, quarry activities, and dense urbanization. To minimize/solve these conflicts, strategies are proposed based on Social Learning methodologies.

  15. Work-Related Stress Risk Assessment in Italy: A Methodological Proposal Adapted to Regulatory Guidelines

    Directory of Open Access Journals (Sweden)

    Benedetta Persechino

    2013-06-01

    Conclusion: This methodological proposal is new on the Italian work-related stress risk assessment scene. Besides providing an evaluation approach using scientifically validated instruments, it ensures the active participation of occupational health professionals in each company. The assessment tools provided enable companies not only to comply with the law, but also to contribute to a database for monitoring and assessment and give access to a reserved area for data analysis and comparisons.

  16. Methodology Proposal for Increasing Swift Trust within Virtual Teams in the Inception Phase of a Project Life-Cycle: Project Manager’s Perspective

    Directory of Open Access Journals (Sweden)

    Milovanović Bojan Morić

    2015-12-01

    Full Text Available This paper proposes team building methodology for project managers in virtual teams as means to develop swift trust between new team members in the inception phase of the project life cycle. Proposed methodology encompasses activities within the first three days after the team formation and proposes the measuring tools for monitoring and managing trust development within the project team. Aim of this paper is to provide new insights to various decision makers potentially interested in increasing the performance of project teams operating in virtual environment, such as: investors, business owners and project managers working in virtual environment.

  17. New transmission planning methodology for requesting proposals for wind generation

    Science.gov (United States)

    Isaacs, Andrew L.

    The increasing interest in renewable energy technologies during the last decade has caused conventional transmission and generation expansion planning methodologies to be strained and in some cases abandoned. This is due both to the quantity of generator interconnection requests and the constraints imposed by deregulated energy industry structures. One technique used to control the influx of renewable generation while maintaining competitive principles is a Request for Proposals (RFP). However, lack of transmission planning due to a disconnection between generation and transmission owners, difficulty in identifying viable projects, and high risk for proponents stand as obstacles to the goals of an RFP. This research proposes a procedure which minimizes the effect of these obstacles; meeting the purchaser requirements for low price and combining conventional planning concepts with feedback from competitive structures. The general features of the method include definition of generation limits and study area, expansion plan design, transmission cost evaluation, optimal selection of requested generation levels, and final selection of successful proponents. The method is shown to be effective in creating an RFP where proponents are well-informed and provided with cost certainty to reduce bid price, buyers are able to determine end costs of their energy, and good expansion planning principles are maintained. A case study using a real system in New Mexico demonstrates these concepts.

  18. The effects of overtime work and task complexity on the performance of nuclear plant operators: A proposed methodology

    International Nuclear Information System (INIS)

    Banks, W.W.; Potash, L.

    1985-01-01

    This document presents a very general methodology for determining the effect of overtime work and task complexity on operator performance in response to simulated out-of-limit nuclear plant conditions. The independent variables consist of three levels of overtime work and three levels of task complexity. Multiple dependent performance measures are proposed for use and discussion. Overtime work is operationally defined in terms of the number of hours worked by nuclear plant operators beyond the traditional 8 hours per shift. Task complexity is operationalized in terms of the number of operator tasks required to remedy a given plant anomalous condition and bring the plant back to a ''within limits'' or ''normal'' steady-state condition. The proposed methodology would employ a 2 factor repeated measures design along with the analysis of variance (linear) model

  19. A methodological proposal for quantifying environmental compensation through the spatial analysis of vulnerability indicators

    Directory of Open Access Journals (Sweden)

    Fabio Enrique Torresan

    2008-06-01

    Full Text Available The aim of this work was to propose a methodology for quantifying the environmental compensation through the spatial analysis of vulnerability indicators. A case study was applied for the analysis of sand extraction enterprises, in the region of Descalvado and Analândia, inland of São Paulo State, Brazil. Environmental vulnerability scores were attributed for the indicators related to erosion, hydrological resources and biodiversity loss. This methodological proposal allowed analyzing the local alternatives of certain enterprise with the objective of reducing impacts and at the same time reducing the costs of environmental compensation. The application of the methodology significantly reduced the subjectivity degree usually associated to the most of the methodologies of impact evaluation.O termo compensação ambiental refere-se à obrigação do empreendedor em apoiar a implantação e manutenção de Unidades de Conservação, aplicável a empreendimentos de significativo impacto ambiental, de acordo com a Lei 9.986/2000. Esta lei estabelece que o volume de recursos a ser aplicado pelo empreendedor deve ser de no mínimo 0,5% dos custos totais previstos para a implantação do empreendimento, sendo que este percentual deve ser fixado pelo órgão ambiental competente, de acordo com o grau de impacto ambiental. Sendo assim, o presente artigo tem o objetivo de propor uma metodologia para quantificação da compensação ambiental através da análise espacial de indicadores de vulnerabilidade ambiental. A proposta foi aplicada através de um estudo de caso em empreendimentos de mineração de areia, na região de Descalvado/Analândia, interior do Estado de São Paulo. Índices de vulnerabilidade ambiental foram atribuídos a indicadores de impactos relacionados à erosão, recursos hídricos e perda de biodiversidade. Esta metodologia representa importante instrumento de planejamento ambiental e econômico, podendo ser adaptada a diversos

  20. A goal programming approach for a joint design of macroeconomic and environmental policies: a methodological proposal and an application to the Spanish economy.

    Science.gov (United States)

    André, Francisco J; Cardenete, M Alejandro; Romero, Carlos

    2009-05-01

    The economic policy needs to pay increasingly more attention to the environmental issues, which requires the development of methodologies able to incorporate environmental, as well as macroeconomic, goals in the design of public policies. Starting from this observation, this article proposes a methodology based upon a Simonian satisficing logic made operational with the help of goal programming (GP) models, to address the joint design of macroeconomic and environmental policies. The methodology is applied to the Spanish economy, where a joint policy is elicited, taking into consideration macroeconomic goals (economic growth, inflation, unemployment, public deficit) and environmental goals (CO(2), NO( x ) and SO( x ) emissions) within the context of a computable general equilibrium model. The results show how the government can "fine-tune" its policy according to different criteria using GP models. The resulting policies aggregate the environmental and the economic goals in different ways: maximum aggregate performance, maximum balance and a lexicographic hierarchy of the goals.

  1. A Methodology Proposal to Calculate the Externalisation of Liquid Bio fuels

    International Nuclear Information System (INIS)

    Galan, A.; Gonzalez, R.; Varela, M.

    1999-01-01

    The aim of the survey is to propose a methodology to calculate the externalisation associated with the liquid bio fuels cycle. The report defines the externalisation from a theoretical point of view and classifies them. The reasons to value the externalisation are explained as well as the existing methods. Furthermore, an evaluation of specific environmental and non-environmental externalisation is also presented. The report also reviews the current situation of the transport sector, considering its environmental effects and impacts. The progress made by the ExtemE and ExternE-Transport projects related the externalisation of transport sector is assessed. Finally, the report analyses the existence of different economic instruments to internalize the external effects of the transport sector as well as other aspects of this internalization. (Author) 58 refs

  2. A Methodology Proposal to Calculate the Externalisation of Liquid Bio fuels

    Energy Technology Data Exchange (ETDEWEB)

    Galan, A.; Gonzalez, R.; Varela, M.

    1999-07-01

    The aim of the survey is to propose a methodology to calculate the externalisation associated with the liquid bio fuels cycle. The report defines the externalisation from a theoretical point of view and classifies them. The reasons to value the externalisation are explained as well as the existing methods. Furthermore, an evaluation of specific environmental and non-environmental externalisation is also presented. The report also reviews the current situation of the transport sector, considering its environmental effects and impacts. The progress made by the ExtemE and ExternE-Transport projects related the externalisation of transport sector is assessed. Finally, the report analyses the existence of different economic instruments to internalize the external effects of the transport sector as well as other aspects of this internalization. (Author) 58 refs.

  3. Proposed Methodology for Establishing Area of Applicability

    International Nuclear Information System (INIS)

    Broadhead, B.L.; Hopper, C.M.; Parks, C.V.

    1999-01-01

    This paper presents the application of sensitivity and uncertainty (S/U) analysis methodologies to the data validation tasks of a criticality safety computational study. The S/U methods presented are designed to provide a formal means of establishing the area (or range) of applicability for criticality safety data validation studies. The development of parameters that are analogous to the standard trending parameters form the key to the technique. These parameters are the so-called D parameters, which represent the differences by energy group of S/U-generated sensitivity profiles, and c parameters, which are the k correlation coefficients, each of which give information relative to the similarity between pairs of selected systems. The use of a Generalized Linear Least-Squares Methodology (GLLSM) tool is also described in this paper. These methods and guidelines are also applied to a sample validation for uranium systems with enrichments greater than 5 wt %

  4. A methodological survey identified eight proposed frameworks for the adaptation of health related guidelines.

    Science.gov (United States)

    Darzi, Andrea; Abou-Jaoude, Elias A; Agarwal, Arnav; Lakis, Chantal; Wiercioch, Wojtek; Santesso, Nancy; Brax, Hneine; El-Jardali, Fadi; Schünemann, Holger J; Akl, Elie A

    2017-06-01

    Our objective was to identify and describe published frameworks for adaptation of clinical, public health, and health services guidelines. We included reports describing methods of adaptation of guidelines in sufficient detail to allow its reproducibility. We searched Medline and EMBASE databases. We also searched personal files, as well manuals and handbooks of organizations and professional societies that proposed methods of adaptation and adoption of guidelines. We followed standard systematic review methodology. Our search captured 12,021 citations, out of which we identified eight proposed methods of guidelines adaptation: ADAPTE, Adapted ADAPTE, Alberta Ambassador Program adaptation phase, GRADE-ADOLOPMENT, MAGIC, RAPADAPTE, Royal College of Nursing (RCN), and Systematic Guideline Review (SGR). The ADAPTE framework consists of a 24-step process to adapt guidelines to a local context taking into consideration the needs, priorities, legislation, policies, and resources. The Alexandria Center for Evidence-Based Clinical Practice Guidelines updated one of ADAPTE's tools, modified three tools, and added three new ones. In addition, they proposed optionally using three other tools. The Alberta Ambassador Program adaptation phase consists of 11 steps and focused on adapting good-quality guidelines for nonspecific low back pain into local context. GRADE-ADOLOPMENT is an eight-step process based on the GRADE Working Group's Evidence to Decision frameworks and applied in 22 guidelines in the context of national guideline development program. The MAGIC research program developed a five-step adaptation process, informed by ADAPTE and the GRADE approach in the context of adapting thrombosis guidelines. The RAPADAPTE framework consists of 12 steps based on ADAPTE and using synthesized evidence databases, retrospectively derived from the experience of producing a high-quality guideline for the treatment of breast cancer with limited resources in Costa Rica. The RCN outlines

  5. Archetype modeling methodology.

    Science.gov (United States)

    Moner, David; Maldonado, José Alberto; Robles, Montserrat

    2018-03-01

    Clinical Information Models (CIMs) expressed as archetypes play an essential role in the design and development of current Electronic Health Record (EHR) information structures. Although there exist many experiences about using archetypes in the literature, a comprehensive and formal methodology for archetype modeling does not exist. Having a modeling methodology is essential to develop quality archetypes, in order to guide the development of EHR systems and to allow the semantic interoperability of health data. In this work, an archetype modeling methodology is proposed. This paper describes its phases, the inputs and outputs of each phase, and the involved participants and tools. It also includes the description of the possible strategies to organize the modeling process. The proposed methodology is inspired by existing best practices of CIMs, software and ontology development. The methodology has been applied and evaluated in regional and national EHR projects. The application of the methodology provided useful feedback and improvements, and confirmed its advantages. The conclusion of this work is that having a formal methodology for archetype development facilitates the definition and adoption of interoperable archetypes, improves their quality, and facilitates their reuse among different information systems and EHR projects. Moreover, the proposed methodology can be also a reference for CIMs development using any other formalism. Copyright © 2018 Elsevier Inc. All rights reserved.

  6. Establishing the subcellular localization of photodynamically-induced ROS using 3,3′-diaminobenzidine: A methodological proposal, with a proof-of-concept demonstration

    DEFF Research Database (Denmark)

    Stockert, Juan Carlos; Blazquez-Castro, Alfonso

    2016-01-01

    The critical involvement of reactive oxygen species (ROS) in both physiological and pathological processes in cell biology makes their detection and assessment a fundamental topic in biomedical research. Established methodologies to study ROS in cell biology take advantage of oxidation reactions...... is proved in a photodynamic model of ROS generation, the principle is applicable to many different scenarios of intracellular ROS production. As a consequence this proposed methodology should greatly complement other techniques aiming at establishing a precise subcellular localization of ROS generation....... between the ROS and a reduced probe. After reacting the probe reveals the presence of ROS either by the appearance of colour (chromogenic reaction) or fluorescence (fluorogenic reaction). However current methodologies rarely allow for a site-specific detection of ROS production. Here we propose...

  7. Proposed Risk-Informed Seismic Hazard Periodic Reevaluation Methodology for Complying with DOE Order 420.1C

    Energy Technology Data Exchange (ETDEWEB)

    Kammerer, Annie [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-03-01

    Department of Energy (DOE) nuclear facilities must comply with DOE Order 420.1C Facility Safety, which requires that all such facilities review their natural phenomena hazards (NPH) assessments no less frequently than every ten years. The Order points the reader to Standard DOE-STD-1020-2012. In addition to providing a discussion of the applicable evaluation criteria, the Standard references other documents, including ANSI/ANS-2.29-2008 and NUREG-2117. These documents provide supporting criteria and approaches for evaluating the need to update an existing probabilistic seismic hazard analysis (PSHA). All of the documents are consistent at a high level regarding the general conceptual criteria that should be considered. However, none of the documents provides step-by-step detailed guidance on the required or recommended approach for evaluating the significance of new information and determining whether or not an existing PSHA should be updated. Further, all of the conceptual approaches and criteria given in these documents deal with changes that may have occurred in the knowledge base that might impact the inputs to the PSHA, the calculated hazard itself, or the technical basis for the hazard inputs. Given that the DOE Order is aimed at achieving and assuring the safety of nuclear facilities—which is a function not only of the level of the seismic hazard but also the capacity of the facility to withstand vibratory ground motions—the inclusion of risk information in the evaluation process would appear to be both prudent and in line with the objectives of the Order. The purpose of this white paper is to describe a risk-informed methodology for evaluating the need for an update of an existing PSHA consistent with the DOE Order. While the development of the proposed methodology was undertaken as a result of assessments for specific SDC-3 facilities at Idaho National Laboratory (INL), and it is expected that the application at INL will provide a demonstration of the

  8. Proposed Risk-Informed Seismic Hazard Periodic Reevaluation Methodology for Complying with DOE Order 420.1C

    Energy Technology Data Exchange (ETDEWEB)

    Kammerer, Annie [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-10-01

    Department of Energy (DOE) nuclear facilities must comply with DOE Order 420.1C Facility Safety, which requires that all such facilities review their natural phenomena hazards (NPH) assessments no less frequently than every ten years. The Order points the reader to Standard DOE-STD-1020-2012. In addition to providing a discussion of the applicable evaluation criteria, the Standard references other documents, including ANSI/ANS-2.29-2008 and NUREG-2117. These documents provide supporting criteria and approaches for evaluating the need to update an existing probabilistic seismic hazard analysis (PSHA). All of the documents are consistent at a high level regarding the general conceptual criteria that should be considered. However, none of the documents provides step-by-step detailed guidance on the required or recommended approach for evaluating the significance of new information and determining whether or not an existing PSHA should be updated. Further, all of the conceptual approaches and criteria given in these documents deal with changes that may have occurred in the knowledge base that might impact the inputs to the PSHA, the calculated hazard itself, or the technical basis for the hazard inputs. Given that the DOE Order is aimed at achieving and assuring the safety of nuclear facilities—which is a function not only of the level of the seismic hazard but also the capacity of the facility to withstand vibratory ground motions—the inclusion of risk information in the evaluation process would appear to be both prudent and in line with the objectives of the Order. The purpose of this white paper is to describe a risk-informed methodology for evaluating the need for an update of an existing PSHA consistent with the DOE Order. While the development of the proposed methodology was undertaken as a result of assessments for specific SDC-3 facilities at Idaho National Laboratory (INL), and it is expected that the application at INL will provide a demonstration of the

  9. Preliminary methodological proposal for estimating environmental flows in projects approved by the ministry of environment and sustainable development (MADS), Colombia

    International Nuclear Information System (INIS)

    Pinilla Agudelo, Gabriel A; Rodriguez Sandoval, Erasmo A; Camacho Botero, Luis A

    2014-01-01

    A methodological proposal for estimating environmental flows in large projects approved by Agencia Nacional de Licencias Ambientales (ANLA) in Colombian rivers was developed. The project is the result of an agreement between the MADS and the Universidad Nacional de Colombia, Bogota (UNC). The proposed method begins with an evaluation of hydrological criteria, continues with a hydraulic and water quality validation, and follows with the determination of habitat integrity. This is an iterative process that compares conditions before and after the project construction and allows to obtain the magnitude of a monthly flow that, besides preserving the ecological functions of the river, guarantees the water uses downstream. Regarding to the biotic component, the proposal includes the establishment and monitoring of biotic integrity indices for four aquatic communities (periphyton, macro invertebrates, riparian vegetation, and fish). The effects that flow reduction may produce in the medium and long term can be assessed by these indices. We present the results of applying the methodology to several projects licensed by the MADS.

  10. Methodological proposal for validation of the disinfecting efficacy of an automated flexible endoscope reprocessor

    Directory of Open Access Journals (Sweden)

    Kazuko Uchikawa Graziano

    Full Text Available ABSTRACT Objective: to elaborate and apply a method to assess the efficacy of automated flexible endoscope reprocessors at a time when there is not an official method or trained laboratories to comply with the requirements described in specific standards for this type of health product in Brazil. Method: the present methodological study was developed based on the following theoretical references: International Organization for Standardization (ISO standard ISO 15883-4/2008 and Brazilian Health Surveillance Agency (Agência Nacional de Vigilância Sanitária - ANVISA Collegiate Board Resolution (Resolução de Diretoria Colegiada - RDC no. 35/2010 and 15/2012. The proposed method was applied to a commercially available device using a high-level 0.2% peracetic acid-based disinfectant. Results: the proposed method of assessment was found to be robust when the recommendations made in the relevant legislation were incorporated with some adjustments to ensure their feasibility. Application of the proposed method provided evidence of the efficacy of the tested equipment for the high-level disinfection of endoscopes. Conclusion: the proposed method may serve as a reference for the assessment of flexible endoscope reprocessors, thereby providing solid ground for the purchase of this category of health products.

  11. A proposal to order the neutron data set in neutron spectrometry using the RDANN methodology

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz R, J.M.; Martinez B, M.R.; Vega C, H.R. [UAZ, Av. Ramon Lopez Velarde No. 801, 98000 Zacatecas (Mexico)

    2006-07-01

    A new proposal to order a neutron data set in the design process of artificial neural networks in the neutron spectrometry field is presented for first time. The robust design of artificial neural networks methodology was applied to 187 neutron spectra data set compiled by the International Atomic Energy Agency. Four cases of grouping the neutron spectra were considered and around 1000 different neural networks were designed, trained and tested with different net topologies each one. After carrying out the systematic methodology for all the cases, it was determined that the best neural network topology that produced the best reconstructed neutron spectra was case with 187 neutron spectra data set, determining that the best neural network topology is: 7 entrance neurons, 14 neurons in a hidden layer and 31 neurons in the exit layer, with a value of 0.1 in the learning rate and 0.1 in the moment. (Author)

  12. A proposal to order the neutron data set in neutron spectrometry using the RDANN methodology

    International Nuclear Information System (INIS)

    Ortiz R, J.M.; Martinez B, M.R.; Vega C, H.R.

    2006-01-01

    A new proposal to order a neutron data set in the design process of artificial neural networks in the neutron spectrometry field is presented for first time. The robust design of artificial neural networks methodology was applied to 187 neutron spectra data set compiled by the International Atomic Energy Agency. Four cases of grouping the neutron spectra were considered and around 1000 different neural networks were designed, trained and tested with different net topologies each one. After carrying out the systematic methodology for all the cases, it was determined that the best neural network topology that produced the best reconstructed neutron spectra was case with 187 neutron spectra data set, determining that the best neural network topology is: 7 entrance neurons, 14 neurons in a hidden layer and 31 neurons in the exit layer, with a value of 0.1 in the learning rate and 0.1 in the moment. (Author)

  13. The methodological proposal of photography as a discharger of the trigger of memory: application to Telêmaco Borba s history (1950-1969

    Directory of Open Access Journals (Sweden)

    Juliana de Oliveira Teixeira

    2014-07-01

    Full Text Available This work has the objectives of testing and systematizing the methodological proposal of photography as a discharger of the trigger of memory, a technique that combines photographic images with oral history. The method, developed by the group Communication and History of Universidade Estadual de Londrina, was formalized in the dissertation of Maria Luisa Hoffmann (2010 and, since then, it has been applied to cities with recent histories. To do a relevant test in this dissertation, Telêmaco Borba(PR was chosen as field of study, and the precepts of empiricism in communication were respected, following the ideas of Maria Immacolata Vassallo Lopes (2010 and Luiz Claudio Martino (2010. The application of the method was also based theoretically, using as references the works of Jacques Le Goff (2003, Ecléa Bosi (2009 and Boris Kossoy (2009. During the empirical process, nine pioneers of Telêmaco Borba were submitted to the methodological proposal, using 17 old photographs of the city. Roughly, the results of the test show that the technique, when applied with the epistemological criteria of science, becomes an efficient empirical tool, capable of bringing new data and information to the studies of memory and to the history of the studied cities.

  14. What should an ideal spinal injury classification system consist of? A methodological review and conceptual proposal for future classifications.

    NARCIS (Netherlands)

    Middendorp, J.J. van; Audige, L.; Hanson, B.; Chapman, J.R.; Hosman, A.J.F.

    2010-01-01

    Since Bohler published the first categorization of spinal injuries based on plain radiographic examinations in 1929, numerous classifications have been proposed. Despite all these efforts, however, only a few have been tested for reliability and validity. This methodological, conceptual review

  15. Experience and Meaning in Qualitative Research: A Conceptual Review and a Methodological Device Proposal

    Directory of Open Access Journals (Sweden)

    Marianne Daher

    2017-07-01

    Full Text Available The relevance of experience and meaning in qualitative research is mostly accepted and is common ground for qualitative studies. However, there is an increasing trend towards trivializing the use of these notions. As a consequence, a mechanistic use of these terms has emerged within qualitative analysis, which has resulted in the loss of the original richness derived from the theoretical roots of these concepts. In this article, we aim to recover these origins by reviewing theoretical postulates from phenomenological and hermeneutic traditions and to propose their convergence in a holistic perspective. The challenge is to find the local source of meanings that will enlighten on how to understand people's experiences. This discussion is the basis for the encounter context themes (ECT methodological device, which emphasizes the importance of studying experience and meaning as part of a larger whole: the participants' life-world. Hence, ECT seeks to complement the available methodological tools for qualitatively-oriented studies, recovering—rather than re-creating—a theoretical discussion useful for current qualitative research practices.

  16. Testing a SEA methodology for the energy sector: a waste incineration tax proposal

    International Nuclear Information System (INIS)

    Nilsson, Maans; Bjoerklund, Anna; Finnveden, Goeran; Johansson, Jessica

    2005-01-01

    Most Strategic Environmental Assessment (SEA) research has been preoccupied with SEA as a procedure and there are relatively few developments and tests of analytical methodologies. This paper applies and tests an analytical framework for an energy sector SEA. In a case study on a policy proposal for waste-to-energy taxation in Sweden, it studies changes in the energy system as a result of implementing the suggested tax by testing three analytical pathways: an LCA pathway, a site-dependent pathway, and a qualitative pathway. In addition, several valuation methods are applied. The assessment indicates that there are some overall environmental benefits to introducing a tax, but that benefits are modest compared to the potential. The methods are discussed in relation to characteristics for effective policy learning and knowledge uptake. The application shows that in many ways they complement each other rather than substitute for each other. The qualitative pathway is useful for raising awareness and getting a comprehensive view of environmental issues, but has limited potential for decision support. The precision increased as we went to LCA and to site-dependent analysis, and a hierarchy emerged in which the qualitative pathway filled rudimentary functions whereas the site-dependent analysis gave more advanced decision support. All methods had limited potential in supporting a choice between alternatives unless data was aggregated through a valuation exercise

  17. Postclosure risks at the proposed Yucca Mountain repository: A review of methodological and technical issues

    International Nuclear Information System (INIS)

    Emel, J.; Kasperson, R.E.; Goble, R.; Renn, O.

    1988-06-01

    Accordingly, the first section of the report provides an overview and critique of the risk analysis methodology proposed by the US Department of Energy (DOE 1988) in the Draft Site Characterization Plan (SCP) and related documents. The second section addresses specific technical problems associated with the site. Each section considers the significance or implications of the issues for the successful long-term isolation of radioactive wastes from the biosphere. We conclude with overall observations on the adequacy of current understandings and approaches in the waste disposal program and implications for the State of Nevada

  18. Assessing a Methodological Proposal for the Design, Creation and Evaluation of Learning Objects Oriented to Educators with Diverse Educational and Technological Competencies

    Directory of Open Access Journals (Sweden)

    Jorge J. Maldonado

    2016-04-01

    Full Text Available This paper describes a methodological proposal for the design, creation and evaluation of Learning Objects (LOs. This study arises from the compilation and analysis of several LO design methodologies currently used in Ibero-America. This proposal, which has been named DICREVOA, defines five different phases: analysis, design (instructional and multimedia, implementation (LO and metadata, evaluation (from the perspective of both the producer and the consumer of the LO, and publishing. The methodology focuses not only on the teaching inexperienced, but also on those having a basic understanding of the technological and educational aspects related to LO design; therefore, the study emphasizes LO design activities centered around the Kolb cycle and the use of the ExeLearning tool in order to implement the LO core. Additionally, DICREVOA was used in a case study, which demonstrates how it provides a feasible mechanism for LO design and implementation withindifferent contexts. Finally, DICREVOA, the case study to which it was applied, and the results obtained are presented.

  19. A proposed heuristic methodology for searching reloading pattern

    International Nuclear Information System (INIS)

    Choi, K. Y.; Yoon, Y. K.

    1993-01-01

    A new heuristic method for loading pattern search has been developed to overcome shortcomings of the algorithmic approach. To reduce the size of vast solution space, general shuffling rules, a regionwise shuffling method, and a pattern grouping method were introduced. The entropy theory was applied to classify possible loading patterns into groups with similarity between them. The pattern search program was implemented with use of the PROLOG language. A two-group nodal code MEDIUM-2D was used for analysis of power distribution in the core. The above mentioned methodology has been tested to show effectiveness in reducing of solution space down to a few hundred pattern groups. Burnable poison rods were then arranged in each pattern group in accordance with burnable poison distribution rules, which led to further reduction of the solution space to several scores of acceptable pattern groups. The method of maximizing cycle length (MCL) and minimizing power-peaking factor (MPF) were applied to search for specific useful loading patterns from the acceptable pattern groups. Thus, several specific loading patterns that have low power-peaking factor and large cycle length were successfully searched from the selected pattern groups. (Author)

  20. Ethical concerns as a methodological proposal to approach cross-cutting themes.

    Directory of Open Access Journals (Sweden)

    Sansao Albino Timbane

    2015-12-01

    Full Text Available The present study highlight how the investment in ethical concerns can contribute as a learning shuttle in a virtual ambient directed to the learning, more than to the teaching. Face-to-face meetings, in a classroom, and distance meetings, on Forchat online space were made. The students proactively participated on the discussions with freedom to decide about the paper’s assumption and thematic propositions according to the personal interest on the studies topics, sometimes as a moderator, other times as contributor, without the teacher interference.  The reality problematization through the ethical concerns presented as relevant effect the proactively engagement on the discussions about the proposed topics, with gains to the conceptual construction and to the methodological positions in the research.  Instigated by the challenge of cross-cutting themes discussed, on a virtual learning ambient, themes related with: docent practice, learning, professional formation, evaluation, theory- practice relation, refreshing debates and reflections about ethical concerns, making a collective text which at same time respected the individual contributions heterogeneity and the produced senses.

  1. Improved cook stove adoption and impact assessment: A proposed methodology

    International Nuclear Information System (INIS)

    Troncoso, Karin; Armendáriz, Cynthia; Alatorre, Silvia

    2013-01-01

    Aims: Until now, the success of improved cook stoves (ICS) implementation programs has usually been measured by the number of ICS distributed. Some important research has been conducted to try to determine the effects of the use of an ICS in the user′s health, but these studies are expensive and time consuming. Moreover, no evaluations show the impact of the technology in the user′s lives. This study seeks to contribute to fill this gap. Scope: By applying cluster analysis techniques to survey data, the most relevant variables that explain adoption and impact were identified. Using these variables, two qualitative indexes are proposed: The adoption index considers the use of the new technology, the level of satisfaction, and the conditions of the stove. The impact index considers the changes in cooking practices and life quality brought about by the ICS. Both indexes are then applied to two implementation programs. The indexes show the differences between the program results and the user′s perceptions of each technology. Conclusions: The proposed indexes can be used to measure the success of an ICS implementation program in terms of the benefits perceived by the users of these technologies. -- Highlights: •Two qualitative indexes are proposed to measure the benefits perceived by ICS users. •Two implementation programs were assessed. •The approach enables determining the impact of ICS programs at a fraction of the cost. •It enables comparing the results of different implementation programs

  2. Energy consumption control automation using Artificial Neural Networks and adaptive algorithms: Proposal of a new methodology and case study

    International Nuclear Information System (INIS)

    Benedetti, Miriam; Cesarotti, Vittorio; Introna, Vito; Serranti, Jacopo

    2016-01-01

    Highlights: • A methodology to enable energy consumption control automation is proposed. • The methodology is based on the use of Artificial Neural Networks. • A method to control the accuracy of the model over time is proposed. • Two methods to enable automatic retraining of the network are proposed. • Retraining methods are evaluated on their accuracy over time. - Abstract: Energy consumption control in energy intensive companies is always more considered as a critical activity to continuously improve energy performance. It undoubtedly requires a huge effort in data gathering and analysis, and the amount of these data together with the scarceness of human resources devoted to Energy Management activities who could maintain and update the analyses’ output are often the main barriers to its diffusion in companies. Advanced tools such as software based on machine learning techniques are therefore the key to overcome these barriers and allow an easy but accurate control. This type of systems is able to solve complex problems obtaining reliable results over time, but not to understand when the reliability of the results is declining (a common situation considering energy using systems, often undergoing structural changes) and to automatically adapt itself using a limited amount of training data, so that a completely automatic application is not yet available and the automatic energy consumption control using intelligent systems is still a challenge. This paper presents a whole new approach to energy consumption control, proposing a methodology based on Artificial Neural Networks (ANNs) and aimed at creating an automatic energy consumption control system. First of all, three different structures of neural networks are proposed and trained using a huge amount of data. Three different performance indicators are then used to identify the most suitable structure, which is implemented to create an energy consumption control tool. In addition, considering that

  3. A quality evaluation methodology of health web-pages for non-professionals.

    Science.gov (United States)

    Currò, Vincenzo; Buonuomo, Paola Sabrina; Onesimo, Roberta; de Rose, Paola; Vituzzi, Andrea; di Tanna, Gian Luca; D'Atri, Alessandro

    2004-06-01

    The proposal of an evaluation methodology for determining the quality of healthcare web sites for the dissemination of medical information to non-professionals. Three (macro) factors are considered for the quality evaluation: medical contents, accountability of the authors, and usability of the web site. Starting from two results in the literature the problem of whether or not to introduce a weighting function has been investigated. This methodology has been validated on a specialized information content, i.e., sore throats, due to the large interest such a topic enjoys with target users. The World Wide Web was accessed using a meta-search system merging several search engines. A statistical analysis was made to compare the proposed methodology with the obtained ranks of the sample web pages. The statistical analysis confirms that the variables examined (per item and sub factor) show substantially similar ranks and are capable of contributing to the evaluation of the main quality macro factors. A comparison between the aggregation functions in the proposed methodology (non-weighted averages) and the weighting functions, derived from the literature, allowed us to verify the suitability of the method. The proposed methodology suggests a simple approach which can quickly award an overall quality score for medical web sites oriented to non-professionals.

  4. Methodology proposal for territorial distribution of greenhouse gas reduction percentages in the EU according to the strategic energy policy goal

    International Nuclear Information System (INIS)

    Tolon-Becerra, A.; Lastra-Bravo, X.; Bienvenido-Barcena, F.

    2010-01-01

    A 20% reduction of greenhouse gas (GHG) emissions by 2020 is one of the main objectives of the European Union (EU) energy policy. However, this overall objective does not specify how it should be distributed among the Member States, according to each one's particular characteristics. Consequently, in this article a non-linear distribution methodology with dynamic objective targets for reducing GHG emissions is proposed. The goal of this methodology is to promote debate over the weighting of these overall objectives, according to the context and characteristics of each member state. First, an analysis is conducted of the situation of greenhouse gas emissions in the reference year (1990) used by the EU for reaching its goal of reducing them by 20% by 2020, and its progress from 1990 to 2007. Then, the methodology proposed was applied for the year 2020 on two territorial aggregation levels following the EUROSTAT Nomenclature of Territorial Units for Statistics (NUTS), in the EU-15 and EU-27 member countries and on a regional level in 19 Spanish Autonomous Communities and Cities (NUTS-2). Weighting is done based on CO 2 intensity, GHG emissions per capita and GHG emissions per GDP. Finally, several recommendations are provided for the formulation of energy policies.

  5. A methodology to incorporate organizational factors into human reliability analysis

    International Nuclear Information System (INIS)

    Li Pengcheng; Chen Guohua; Zhang Li; Xiao Dongsheng

    2010-01-01

    A new holistic methodology for Human Reliability Analysis (HRA) is proposed to model the effects of the organizational factors on the human reliability. Firstly, a conceptual framework is built, which is used to analyze the causal relationships between the organizational factors and human reliability. Then, the inference model for Human Reliability Analysis is built by combining the conceptual framework with Bayesian networks, which is used to execute the causal inference and diagnostic inference of human reliability. Finally, a case example is presented to demonstrate the specific application of the proposed methodology. The results show that the proposed methodology of combining the conceptual model with Bayesian Networks can not only easily model the causal relationship between organizational factors and human reliability, but in a given context, people can quantitatively measure the human operational reliability, and identify the most likely root causes or the prioritization of root causes caused human error. (authors)

  6. Title: Studies on drug switchability showed heterogeneity in methodological approaches: a scoping review.

    Science.gov (United States)

    Belleudi, Valeria; Trotta, Francesco; Vecchi, Simona; Amato, Laura; Addis, Antonio; Davoli, Marina

    2018-05-16

    Several drugs share the same therapeutic indication, including those undergoing patent expiration. Concerns on the interchangeability are frequent in clinical practice, challenging the evaluation of switchability through observational research. To conduct a scoping review of observational studies on drug switchability to identify methodological strategies adopted to deal with bias and confounding. We searched PubMed, EMBASE, and Web of Science (updated 1/31/2017) to identify studies evaluating switchability in terms of effectiveness/safety outcomes or compliance. Three reviewers independently screened studies extracting all characteristics. Strategies to address confounding, particularly, previous drug use and switching reasons were considered. All findings were summarized in descriptive analyses. Thirty-two studies, published in the last 10 years, met the inclusion criteria. Epilepsy, cardiovascular and rheumatology were the most frequently represented clinical areas. 75% of the studies reported data on effectiveness/safety outcomes. The most frequent study design was cohort (65.6%) followed by case-control (21.9%) and self-controlled (12.5%). Case-control and case-crossover studies showed homogeneous methodological strategies to deal with bias and confounding. Among cohort studies, the confounding associated with previous drug use was addressed introducing variables in multivariate model (47.3%) or selecting only adherent patients (14.3%). Around 30% of cohort studies did not report reasons for switching. In the remaining 70%, clinical parameters or previous occurrence of outcomes were measured to identify switching connected with lack of effectiveness or adverse events. This study represents a starting point for researchers and administrators who are approaching the investigation and assessment of issues related to interchangeability of drugs. Copyright © 2018. Published by Elsevier Inc.

  7. Proposing C4ISR Architecture Methodology for Homeland Security

    National Research Council Canada - National Science Library

    Farah-Stapleton, Monica F; Dimarogonas, James; Eaton, Rodney; Deason, Paul J

    2004-01-01

    This presentation presents how a network architecture methodology developed for the Army's Future Force could be applied to the requirements of Civil Support, Homeland Security/Homeland Defense (CS HLS/HLD...

  8. METHODOLOGICAL PROPOSAL FOR COMPILING THE ILO UNEMPLOYMENT WITH MONTHLY PERIODICITY

    Directory of Open Access Journals (Sweden)

    Silvia PISICĂ

    2011-08-01

    Full Text Available Development of methodology for deriving the monthly unemployment statistics directly from the quarterly Labour Force Survey (LFS results by econometric modeling meets the requirements of insuring the information on short-term needed for employment policies, aiming to achieve the objectives of Europe 2020. Estimated monthly data series according to the methodology allow assessment of short-term trends in unemployment measured according to the criteria of the International Labour Organisation (ILO in terms of comparability with European statistics.

  9. A methodology for creating greenways through multidisciplinary sustainable landscape planning.

    Science.gov (United States)

    Pena, Selma Beatriz; Abreu, Maria Manuela; Teles, Rui; Espírito-Santo, Maria Dalila

    2010-01-01

    This research proposes a methodology for defining greenways via sustainable planning. This approach includes the analysis and discussion of culture and natural processes that occur in the landscape. The proposed methodology is structured in three phases: eco-cultural analysis; synthesis and diagnosis; and proposal. An interdisciplinary approach provides an assessment of the relationships between landscape structure and landscape dynamics, which are essential to any landscape management or land use. The landscape eco-cultural analysis provides a biophysical, dynamic (geomorphologic rate), vegetation (habitats from directive 92/43/EEC) and cultural characterisation. The knowledge obtained by this analysis then supports the definition of priority actions to stabilise the landscape and the management measures for the habitats. After the analysis and diagnosis phases, a proposal for the development of sustainable greenways can be achieved. This methodology was applied to a study area of the Azambuja Municipality in the Lisbon Metropolitan Area (Portugal). The application of the proposed methodology to the study area shows that landscape stability is crucial for greenway users in order to appreciate the landscape and its natural and cultural elements in a sustainable and healthy way, both by cycling or by foot. A balanced landscape will increase the value of greenways and in return, they can develop socio-economic activities with benefits for rural communities. Copyright 2009 Elsevier Ltd. All rights reserved.

  10. A Design Methodology for Medical Processes

    Science.gov (United States)

    Bonacina, Stefano; Pozzi, Giuseppe; Pinciroli, Francesco; Marceglia, Sara

    2016-01-01

    Summary Background Healthcare processes, especially those belonging to the clinical domain, are acknowledged as complex and characterized by the dynamic nature of the diagnosis, the variability of the decisions made by experts driven by their experiences, the local constraints, the patient’s needs, the uncertainty of the patient’s response, and the indeterminacy of patient’s compliance to treatment. Also, the multiple actors involved in patient’s care need clear and transparent communication to ensure care coordination. Objectives In this paper, we propose a methodology to model healthcare processes in order to break out complexity and provide transparency. Methods The model is grounded on a set of requirements that make the healthcare domain unique with respect to other knowledge domains. The modeling methodology is based on three main phases: the study of the environmental context, the conceptual modeling, and the logical modeling. Results The proposed methodology was validated by applying it to the case study of the rehabilitation process of stroke patients in the specific setting of a specialized rehabilitation center. The resulting model was used to define the specifications of a software artifact for the digital administration and collection of assessment tests that was also implemented. Conclusions Despite being only an example, our case study showed the ability of process modeling to answer the actual needs in healthcare practices. Independently from the medical domain in which the modeling effort is done, the proposed methodology is useful to create high-quality models, and to detect and take into account relevant and tricky situations that can occur during process execution. PMID:27081415

  11. A Design Methodology for Medical Processes.

    Science.gov (United States)

    Ferrante, Simona; Bonacina, Stefano; Pozzi, Giuseppe; Pinciroli, Francesco; Marceglia, Sara

    2016-01-01

    Healthcare processes, especially those belonging to the clinical domain, are acknowledged as complex and characterized by the dynamic nature of the diagnosis, the variability of the decisions made by experts driven by their experiences, the local constraints, the patient's needs, the uncertainty of the patient's response, and the indeterminacy of patient's compliance to treatment. Also, the multiple actors involved in patient's care need clear and transparent communication to ensure care coordination. In this paper, we propose a methodology to model healthcare processes in order to break out complexity and provide transparency. The model is grounded on a set of requirements that make the healthcare domain unique with respect to other knowledge domains. The modeling methodology is based on three main phases: the study of the environmental context, the conceptual modeling, and the logical modeling. The proposed methodology was validated by applying it to the case study of the rehabilitation process of stroke patients in the specific setting of a specialized rehabilitation center. The resulting model was used to define the specifications of a software artifact for the digital administration and collection of assessment tests that was also implemented. Despite being only an example, our case study showed the ability of process modeling to answer the actual needs in healthcare practices. Independently from the medical domain in which the modeling effort is done, the proposed methodology is useful to create high-quality models, and to detect and take into account relevant and tricky situations that can occur during process execution.

  12. A proposed quantitative credit-rating methodology for South African provincial departments

    Directory of Open Access Journals (Sweden)

    Erika Fourie

    2016-05-01

    Full Text Available The development of subnational credit-rating methodologies affords benefits for subnationals, the sovereign and its citizens. Trusted credit ratings facilitate access to financial markets and above-average ratings allow for the negotiation of better collateral and guarantee agreements, as well as for funding of, for example, infrastructure projects at superior (lower interest rates. This paper develops the quantitative section of a credit-rating methodology for South African subnationals. The unique characteristics of South African data, their assembly, and the selection of dependent and independent variables for the linear-regression model chosen, are discussed. The methodology is then applied to the provincial Department of Health using linear regression modelling.

  13. Methodological proposal of grounding in commercial and industrial installations

    International Nuclear Information System (INIS)

    Rodriguez Araya, Michael Eduardo

    2013-01-01

    A methodology is elaborated for the design of methods of commercial and industrial grounding. International standards and technical documents related with the grounding in the electrical design are studied in commercial and industrial installations. The design techniques of earthing systems are investigated. The topics that were covered to develop a design proposal have been: the analysis of resistivity, soil types, calculations of step voltages, contact and voltage of mesh. A field visit is programmed in nearby of the Escuela de Ingenieria Electrica at the Universidad de Costa Rica, to realize the pertinent measurements of resistivity for the design of a hypothetical grounding mesh for a future installation. The tellurometer (GP-1 model) of the brand Amprobe Instrument was used to provide the data from ground resistivity. The equipment has used four electrodes and has implemented the Wenner method for calculations. A earthing design is realized in a company in the industrial or commercial sector of Costa Rica. The earthing designs are realized to protect equipments found at the site and are affected by conditions such as: atmospheric overloads, transients, sags, interruptions or any event that may to affect the quality of the energy. The resistivity of an ground has depended largely on the amount of moisture that has presented. A correct earthing system should cover the greater amount of the total area of the building, and to comply with the voltage of mesh necessary for the design has been optimal. The design of any earthing has depended on unique characteristics that have been indicated by the location of industry [es

  14. Methodological proposal to tackle the Visual Basic program in senior high schools of Pinar del Rio. (First part

    Directory of Open Access Journals (Sweden)

    Manuel Pereira Rosa

    2003-06-01

    Full Text Available A proposed dosage for the contents to be addressed in the teaching of traditional programming languages in the pre-university level, methodological for treatment suggestions as well as a system of exercises in correspondence with the changes that take is offered in this article out at school, which may constitute material support for the planning, execution and control of the teaching process in this subject.

  15. Professional skills training proposal for professors of health programs

    Directory of Open Access Journals (Sweden)

    Mauricio Alberto Ángel-Macías

    2017-10-01

    Conclusions: This study shows the urgent need for creating training spaces in pedagogy, didactics and evaluation. In consequence, a model that includes cognitive, methodological, social and personal skills is proposed.

  16. IMPROVING METHODOLOGY OF RISK IDENTIFICATION OF OCCUPATIONAL DANGEROUS

    Directory of Open Access Journals (Sweden)

    A. P. BOCHKOVSKYI

    2018-04-01

    Full Text Available In the paper, according to the analysis of statistical data, correlation between the amount of occupational injuries and occupationaldiseases in Ukraine within last 5 years is defined. Also, using methodology of the International Labor Organizationcorrelcation between the amount of accident fatalities and general number of accidents in Ukraine and EU countries (Austria, GreatBritain, Germany, Denmark, Norway, Poland, Hungry, Finland, France is defined. It is shown that in spite of the positive dynamicsof decreasing amount of occupational injuries, the number of occupational diseases in Ukraine always increases. The comparativeanalysis of the ratio of the number of accident fatalities to the total number of registered accidents showed that, on average, Ukraineexceeds the EU countries by this indicator by 100 times.It is noted, that such negative indicators (in particular, increasing amount of occupational diseases, may occure because ofimperfect methodology for identifying the risks of professional dangerous.Also, it is ascertained that basing on the existed methodology, the identefication process of occupational dangerous isquite subjective, which reduces objectivity of conducting quantitative assessment. In order to eliminate defined drawnbacks it is firsttime proposed to use corresponding integral criterion to conduct the process of quantitative risk assessmentTo solve this problem authors formulate and propose an algorithm of improving methodology of a process of analysing dangerousand harmful production effects (DHPE which are the mainest reasons of occupational dangerous.The proposed algorithm includes implementation of four following successive steps: DHPE identification, indication of theirmaximum allowed threshold of concentrations (levels, identification of the sources of identified DHPE, esimation of consequencesof manifestation.The improved proposed methodology allows indentify risks of occurrence occupational dangerous in systems

  17. The prosa methodology for scenario development

    International Nuclear Information System (INIS)

    Grupa, J.B.

    2001-01-01

    In this paper a methodology for scenario development is proposed. The method is developed in an effort to convince ourselves (and others) that all conceivable future developments of a waste repository have been covered. To be able to assess all conceivable future developments, the method needs to be comprehensive. To convince us and others the method should be structured in such a way that the treatment of each conceivable future development is traceable. The methodology is currently being applied to two Dutch disposal designs. Preliminary results show that the elaborated method functions better than the original method. However, some elements in the method will need further refinement. (author)

  18. PROPOSAL METHODOLOGY OF THE SUBSYSTEM - INTERNAL STANDARDIZATION AS PART OF TQM SYSTEM

    Directory of Open Access Journals (Sweden)

    Elizabeta Mitreva

    2012-09-01

    Full Text Available Standardization in the management system becomes a key task of the managers and a priority issue for survival of every organization of this century. Besides the company's owner which is mostly concerned with the profit and fast multiplication of its invested capital, many other parties such as consumers, community, employees, deliverers and the society make a pressure in demanding. As of those demands the organization is to adapt its management system according the standards in order to be safe t hat the expectations will be fulfilled. However, to fulfill the standards in Europe and worldwide it is necessary to approach towards huge - radical changes in problem solving i.e. reengineering, new manner of consideration of causes and not as the so far known way - thinking over the consequences. Implementing this new TQM strategy means designing solidly documented quality system that covers every working process in a company and appears as a necessary base for successful usage of statistical process contr ol (SPC and efficient teamwork which otherwise in case of bad quality system will not be able to be set. In this manner it is guaranteed that the attitude of the top management is conducted; this attitude is consisted within the quality policy that create s a climate and information base whe re team work can be developed. This paper offers a proposal methodology for designing and implementation of internal standardization of TQM system in companies. This methodology is applicable in factory for reconstructio n of wagons and in a factory for confectionary production and has shown its efficiency and usage. In order to design the processes in line with the consumers/ clients content and at the same time to achieve profitability, it is necessary to reengineer the working processes

  19. Friedman’s Methodology: A Puzzle and A Proposal for Generating Useful Debates through Causal Comparisons (with a postscript on positive vs. normative theories)

    OpenAIRE

    Khan, Haider

    2008-01-01

    Milton Friedman’s “The Methodology of Positive Economies” is still one of the most widely read pieces on economic methodology. One reason for this might be Friedman’s attractive proposal that economists use theories and hypotheses as pragmatic devices to summarize data and make predictions over the relevant range of observations. Logically, this should lead to a fair minded comparison among many contending theories. However, Friedman's actual examples and discussion of these examples raise a ...

  20. A proposed quantitative credit-rating methodology for South African provincial departments

    OpenAIRE

    Erika Fourie; Tanja Verster; Gary Wayne van Vuuren

    2016-01-01

    The development of subnational credit-rating methodologies affords benefits for subnationals, the sovereign and its citizens. Trusted credit ratings facilitate access to financial markets and above-average ratings allow for the negotiation of better collateral and guarantee agreements, as well as for funding of, for example, infrastructure projects at superior (lower) interest rates. This paper develops the quantitative section of a credit-rating methodology for South African subnationals. Th...

  1. A proposal for investment recovery of FACTS devices in deregulated electricity markets

    International Nuclear Information System (INIS)

    Mithulananthan, Nadarajah; Acharya, Naresh

    2007-01-01

    The paper presents a methodology to quantify the benefits, in terms of monetary values, of FACTS devices when used in deregulated electricity market for congestion management. The proposed methodology is used in the proposal for investment recovery of FACTS devices. Despite the long history of development and mature technology, the practical installations of FACTS devices are still limited. The main reasons for few installations are high investment cost and lack of viable measures to quantify the long list of benefits offered by FACTS device. In this respect, the methodology proposed in the paper provides a promising solution. The proposed methodology is based on establishing pricing schemes with and without FACTS devices using OPF formulation. The volume of market with FACTS devices and the increase in surplus due to them forms the basis of quantifying their benefits. The pricing scheme does not destroy the incentive effect in short run and also makes possible the provision of merchant FACTS. The proposed concept was tested and validated with TCSC in five-bus test system. Result shows that, when TCSC is used to relieve congestion in the system and the investment on TCSC can be recovered. (author)

  2. Selective methodology of population dynamics for optimizing a multiobjective environment of job shop production

    Directory of Open Access Journals (Sweden)

    Santiago Ruiz

    2015-01-01

    Full Text Available This paper develops a methodology based on population genetics to improve the performance of two or more variables in job shop production systems. The methodology applies a genetic algorithm with special features in the individual selection when they pass from generation to generation. In comparison with the FIFO method, the proposed methodology showed better results in the variables makespan, idle time and energy cost. When compared with NSGA II, the methodology did not showed relevant differences in makespan and idle time; however better performance was obtained in energy cost and, especially, in the number of required iterations to get the optimal makespan.

  3. Effects of disease severity distribution on the performance of quantitative diagnostic methods and proposal of a novel 'V-plot' methodology to display accuracy values.

    Science.gov (United States)

    Petraco, Ricardo; Dehbi, Hakim-Moulay; Howard, James P; Shun-Shin, Matthew J; Sen, Sayan; Nijjer, Sukhjinder S; Mayet, Jamil; Davies, Justin E; Francis, Darrel P

    2018-01-01

    Diagnostic accuracy is widely accepted by researchers and clinicians as an optimal expression of a test's performance. The aim of this study was to evaluate the effects of disease severity distribution on values of diagnostic accuracy as well as propose a sample-independent methodology to calculate and display accuracy of diagnostic tests. We evaluated the diagnostic relationship between two hypothetical methods to measure serum cholesterol (Chol rapid and Chol gold ) by generating samples with statistical software and (1) keeping the numerical relationship between methods unchanged and (2) changing the distribution of cholesterol values. Metrics of categorical agreement were calculated (accuracy, sensitivity and specificity). Finally, a novel methodology to display and calculate accuracy values was presented (the V-plot of accuracies). No single value of diagnostic accuracy can be used to describe the relationship between tests, as accuracy is a metric heavily affected by the underlying sample distribution. Our novel proposed methodology, the V-plot of accuracies, can be used as a sample-independent measure of a test performance against a reference gold standard.

  4. Scrum methodology in banking environment

    OpenAIRE

    Strihová, Barbora

    2015-01-01

    Bachelor thesis "Scrum methodology in banking environment" is focused on one of agile methodologies called Scrum and description of the methodology used in banking environment. Its main goal is to introduce the Scrum methodology and outline a real project placed in a bank focused on software development through a case study, address problems of the project, propose solutions of the addressed problems and identify anomalies of Scrum in software development constrained by the banking environmen...

  5. Methodology for environmental audit of execution in gas-pipelines and pipelines

    International Nuclear Information System (INIS)

    Hurtado Palomino, Maria Patricia; Vargas Bejarano, Carlos Hernando

    1999-01-01

    In first instance the constructive aspects and the environmental impact related with the gas-pipes and pipelines construction are presented; then a methodology to make the environmental audit of execution in gas-pipes and pipelines, is showed. They contemplate four stages basically: planning, pre-auditory, execution and analysis, and post-auditory with their respective activities. Also, it is given to know, generalities of the practical case, to evaluate the applicability of the proposed methodology

  6. Methodology for the digital calibration of analog circuits and systems with case studies

    CERN Document Server

    Pastre, Marc

    2006-01-01

    Methodology for the Digital Calibration of Analog Circuits and Systems shows how to relax the extreme design constraints in analog circuits, allowing the realization of high-precision systems even with low-performance components. A complete methodology is proposed, and three applications are detailed. To start with, an in-depth analysis of existing compensation techniques for analog circuit imperfections is carried out. The M/2+M sub-binary digital-to-analog converter is thoroughly studied, and the use of this very low-area circuit in conjunction with a successive approximations algorithm for digital compensation is described. A complete methodology based on this compensation circuit and algorithm is then proposed. The detection and correction of analog circuit imperfections is studied, and a simulation tool allowing the transparent simulation of analog circuits with automatic compensation blocks is introduced. The first application shows how the sub-binary M/2+M structure can be employed as a conventional di...

  7. Two methodologies for optical analysis of contaminated engine lubricants

    International Nuclear Information System (INIS)

    Aghayan, Hamid; Yang, Jun; Bordatchev, Evgueni

    2012-01-01

    , coherence function, etc) are used for the analysis of combined object–lubricant images. Both proposed methodologies utilize the comparison of measured parameters and calculated object shape-based and statistical characteristics for fresh and contaminated lubricants. Developed methodologies are verified experimentally showing an ability to distinguish lubricant with 0%, 3%, 7% and 10% water and coolant contamination. This proves the potential applicability of the developed methodologies for on-line measurement, monitoring and control of the engine lubricant condition

  8. Analysing Medieval Urban Space; a methodology

    Directory of Open Access Journals (Sweden)

    Marlous L. Craane MA

    2007-08-01

    Full Text Available This article has been written in reaction to recent developments in medieval history and archaeology, to study not only the buildings in a town but also the spaces that hold them together. It discusses a more objective and interdisciplinary approach for analysing urban morphology and use of space. It proposes a 'new' methodology by combining town plan analysis and space syntax. This methodology was trialled on the city of Utrecht in the Netherlands. By comparing the results of this 'new' methodology with the results of previous, more conventional, research, this article shows that space syntax can be applied successfully to medieval urban contexts. It does this by demonstrating a strong correlation between medieval economic spaces and the most integrated spaces, just as is found in the study of modern urban environments. It thus provides a strong basis for the use of this technique in future research of medieval urban environments.

  9. Effects of disease severity distribution on the performance of quantitative diagnostic methods and proposal of a novel ‘V-plot’ methodology to display accuracy values

    Science.gov (United States)

    Dehbi, Hakim-Moulay; Howard, James P; Shun-Shin, Matthew J; Sen, Sayan; Nijjer, Sukhjinder S; Mayet, Jamil; Davies, Justin E; Francis, Darrel P

    2018-01-01

    Background Diagnostic accuracy is widely accepted by researchers and clinicians as an optimal expression of a test’s performance. The aim of this study was to evaluate the effects of disease severity distribution on values of diagnostic accuracy as well as propose a sample-independent methodology to calculate and display accuracy of diagnostic tests. Methods and findings We evaluated the diagnostic relationship between two hypothetical methods to measure serum cholesterol (Cholrapid and Cholgold) by generating samples with statistical software and (1) keeping the numerical relationship between methods unchanged and (2) changing the distribution of cholesterol values. Metrics of categorical agreement were calculated (accuracy, sensitivity and specificity). Finally, a novel methodology to display and calculate accuracy values was presented (the V-plot of accuracies). Conclusion No single value of diagnostic accuracy can be used to describe the relationship between tests, as accuracy is a metric heavily affected by the underlying sample distribution. Our novel proposed methodology, the V-plot of accuracies, can be used as a sample-independent measure of a test performance against a reference gold standard. PMID:29387424

  10. A Methodology for Reducing Bench Strength in Information Technology Companies

    Directory of Open Access Journals (Sweden)

    Boby John

    2015-07-01

    Full Text Available One of the major risks in information technology (IT project execution is the non-availability of resources with required skill sets to meet the project demands. To mitigate this risk, almost every IT organization maintains a portion of their resources on bench. The bench strength reduces the delay in starting the project due to the non-availability of skilled resources. But bench strength or buffer is cost to the company. A medium scale Indian IT company incurs around USD 142,347 monthly on maintaining the bench strength. Hence this study is undertaken to develop a methodology to reduce the bench strength in IT companies. The proposed methodology is to obtain an optimum mix of resources from bench and through recruitment to meet the demands at a minimum cost. This is done by formulating the problem as an integer programming problem. The problem aims to minimize the total cost of obtaining the skilled resources without violating the constraints on demand, bench strength availability and recruitment lead time. The problem can be solved using Microsoft excel solver function or any other optimization packages like CPLEX, Gurobi, etc. A case study on the application of proposed methodology is also discussed in the paper. The case study showed that the proposed methodology is superior to the existing practice of maintaining large bench strengths to meet the demands for resources with various skills.

  11. A Methodology to Institutionalise User Experience in Provincial Government

    Directory of Open Access Journals (Sweden)

    Marco Cobus Pretorius

    2014-12-01

    Full Text Available Problems experienced with website usability can prevent users from accessing and adopting technology, such as e-Government. At present, a number of guidelines exist for e-Government website user experience (UX design; however, the effectiveness of the implementation of these guidelines depends on the expertise of the website development team and on an organisation’s understanding of UX. Despite the highlighted importance of UX, guidelines are rarely applied in South African e-Government website designs. UX guidelines cannot be implemented if there is a lack of executive support, trained staff, budget and user-centred design processes. The goal of this research is to propose and evaluate a methodology (called the “Institutionalise UX in Government (IUXG methodology” to institutionalise UX in South African Provincial Governments (SAPGs. The Western Cape Government in South Africa was used as a case study to evaluate the proposed IUXG methodology. The results show that the IUXG methodology can assist SAPGs to establish UX as standard practice and improve the UX maturity levels.

  12. Robust PV Degradation Methodology and Application

    Energy Technology Data Exchange (ETDEWEB)

    Jordan, Dirk [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Deline, Christopher A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Kurtz, Sarah [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Kimball, Greg [SunPower; Anderson, Mike [SunPower

    2017-11-15

    The degradation rate plays an important role in predicting and assessing the long-term energy generation of PV systems. Many methods have been proposed for extracting the degradation rate from operational data of PV systems, but most of the published approaches are susceptible to bias due to inverter clipping, module soiling, temporary outages, seasonality, and sensor degradation. In this manuscript, we propose a methodology for determining PV degradation leveraging available modeled clear-sky irradiance data rather than site sensor data, and a robust year-over-year (YOY) rate calculation. We show the method to provide reliable degradation rate estimates even in the case of sensor drift, data shifts, and soiling. Compared with alternate methods, we demonstrate that the proposed method delivers the lowest uncertainty in degradation rate estimates for a fleet of 486 PV systems.

  13. Scoping paper on new CDM baseline methodology for cross-border power trade

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    Poeyry has been sub-contracted by Carbon Limits, under the African Development Bank CDM Support Programme, to prepare a new CDM baseline methodology for cross border trade, based on a transmission line from Ethiopia to Kenya. The first step in that process is to review the response of the UNFCCC, particularly the Methodologies Panel ('Meth Panel') of the CDM Executive Board, to the various proposals on cross-border trade and interconnection of grids. This report reviews the Methodology Panel and Executive Board decisions on 4 requests for revisions of ACM2 'Consolidated baseline methodology for grid-connected electricity generation from renewable sources', and 5 proposed new baseline methodologies (NM255, NM269, NM272, NM318, NM342), all of which were rejected. We analyse the reasons the methodologies were rejected, and whether the proposed draft Approved Methodology (AM) that the Methodology Panel created in response to NM269 and NM272 is a suitable basis for a new methodology proposal.(auth)

  14. PIA and REWIND: Two New Methodologies for Cross Section Adjustment

    Energy Technology Data Exchange (ETDEWEB)

    Palmiotti, G.; Salvatores, M.

    2017-02-01

    This paper presents two new cross section adjustment methodologies intended for coping with the problem of compensations. The first one PIA, Progressive Incremental Adjustment, gives priority to the utilization of experiments of elemental type (those sensitive to a specific cross section), following a definite hierarchy on which type of experiment to use. Once the adjustment is performed, both the new adjusted data and the new covariance matrix are kept. The second methodology is called REWIND (Ranking Experiments by Weighting for Improved Nuclear Data). This new proposed approach tries to establish a methodology for ranking experiments by looking at the potential gain they can produce in an adjustment. Practical applications for different adjustments illustrate the results of the two methodologies against the current one and show the potential improvement for reducing uncertainties in target reactors.

  15. Developing educational hypermedia applications: a methodological approach

    Directory of Open Access Journals (Sweden)

    Jose Miguel Nunes

    1996-01-01

    Full Text Available This paper proposes an hypermedia development methodology with the aim of integrating the work of both educators, who will be primarily responsible for the instructional design, with that of software experts, responsible for the software design and development. Hence, it is proposed that the educators and programmers should interact in an integrated and systematic manner following a methodological approach.

  16. Reliability Centered Maintenance - Methodologies

    Science.gov (United States)

    Kammerer, Catherine C.

    2009-01-01

    Journal article about Reliability Centered Maintenance (RCM) methodologies used by United Space Alliance, LLC (USA) in support of the Space Shuttle Program at Kennedy Space Center. The USA Reliability Centered Maintenance program differs from traditional RCM programs because various methodologies are utilized to take advantage of their respective strengths for each application. Based on operational experience, USA has customized the traditional RCM methodology into a streamlined lean logic path and has implemented the use of statistical tools to drive the process. USA RCM has integrated many of the L6S tools into both RCM methodologies. The tools utilized in the Measure, Analyze, and Improve phases of a Lean Six Sigma project lend themselves to application in the RCM process. All USA RCM methodologies meet the requirements defined in SAE JA 1011, Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes. The proposed article explores these methodologies.

  17. Determining the number of kanbans for dynamic production systems: An integrated methodology

    Directory of Open Access Journals (Sweden)

    Özlem Uzun Araz

    2016-08-01

    Full Text Available Just-in-time (JIT is a management philosophy that reduces the inventory levels and eliminates manufacturing wastes by producing only the right quantity at the right time. A kanban system is one of the key elements of JIT philosophy. Kanbans are used to authorize production and to control movement of materials in JIT systems. In Kanban systems, the efficiency of the manufacturing system depends on several factors such as number of kanbans, container size etc. Hence, determining the number of kanbans is a critical decision in Kanban systems. The aim of this study is to develop a methodology that can be used in order to determine the number of kanbans in a dynamic production environment. In this methodology, the changes in system state is monitored in real time manner, and the number of the kanbans are dynamically re-arranged. The proposed methodology integrates simulation, neural networks and Mamdani type fuzzy inference system. The methodology is modelled in simulation environment and applied on a hypothetic production system. We also performed several comparisons for different control policies to show the effectiveness of the proposed methodology.

  18. A neural network based methodology to predict site-specific spectral acceleration values

    Science.gov (United States)

    Kamatchi, P.; Rajasankar, J.; Ramana, G. V.; Nagpal, A. K.

    2010-12-01

    A general neural network based methodology that has the potential to replace the computationally-intensive site-specific seismic analysis of structures is proposed in this paper. The basic framework of the methodology consists of a feed forward back propagation neural network algorithm with one hidden layer to represent the seismic potential of a region and soil amplification effects. The methodology is implemented and verified with parameters corresponding to Delhi city in India. For this purpose, strong ground motions are generated at bedrock level for a chosen site in Delhi due to earthquakes considered to originate from the central seismic gap of the Himalayan belt using necessary geological as well as geotechnical data. Surface level ground motions and corresponding site-specific response spectra are obtained by using a one-dimensional equivalent linear wave propagation model. Spectral acceleration values are considered as a target parameter to verify the performance of the methodology. Numerical studies carried out to validate the proposed methodology show that the errors in predicted spectral acceleration values are within acceptable limits for design purposes. The methodology is general in the sense that it can be applied to other seismically vulnerable regions and also can be updated by including more parameters depending on the state-of-the-art in the subject.

  19. A deviation based assessment methodology for multiple machine health patterns classification and fault detection

    Science.gov (United States)

    Jia, Xiaodong; Jin, Chao; Buzza, Matt; Di, Yuan; Siegel, David; Lee, Jay

    2018-01-01

    Successful applications of Diffusion Map (DM) in machine failure detection and diagnosis have been reported in several recent studies. DM provides an efficient way to visualize the high-dimensional, complex and nonlinear machine data, and thus suggests more knowledge about the machine under monitoring. In this paper, a DM based methodology named as DM-EVD is proposed for machine degradation assessment, abnormality detection and diagnosis in an online fashion. Several limitations and challenges of using DM for machine health monitoring have been analyzed and addressed. Based on the proposed DM-EVD, a deviation based methodology is then proposed to include more dimension reduction methods. In this work, the incorporation of Laplacian Eigen-map and Principal Component Analysis (PCA) are explored, and the latter algorithm is named as PCA-Dev and is validated in the case study. To show the successful application of the proposed methodology, case studies from diverse fields are presented and investigated in this work. Improved results are reported by benchmarking with other machine learning algorithms.

  20. Methodology for using root locus technique for mobile robots path planning

    Directory of Open Access Journals (Sweden)

    Mario Ricardo Arbulú Saavedra

    2015-11-01

    Full Text Available This paper shows the analysis and the implementation methodology of the technique of dynamic systems roots location used in free-obstacle path planning for mobile robots. First of all, the analysis and morphologic behavior identification of the paths depending on roots location in complex plane are performed, where paths type and their attraction and repulsion features in the presence of other roots similarly to the obtained with artificial potential fields are identified. An implementation methodology for this technique of mobile robots path planning is proposed, starting from three different methods of roots location for obstacles in the scene. Those techniques change depending on the obstacle key points selected for roots, such as borders, crossing points with original path, center and vertices. Finally, a behavior analysis of general technique and the effectiveness of each tried method is performed, doing 20 tests for each one, obtaining a value of 65% for the selected method. Modifications and possible improvements to this methodology are also proposed.

  1. Proposal of inspection methodology for environment radiological control; Proposta de metodologia de inspecao para controle radiologico ambiental

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Nadia Soido Falcao

    2005-07-01

    The Radiation Protection and Dosimetry Institute (IRD) of the Brazilian Nuclear Energy Commission (CNEN) is in charge of verifying that the self-monitoring operator is effective to control the radiological quality of environmental around the nuclear facilities and carried out in accordance with the regulatory requirements. While a long time, the verification of compliance was kept by the conduction of large scale monitoring programs around all the authorized installations. The IRD decided to reformulate its performance behavior, starting another kind of control program, due to the number increase of nuclear installations and the diversity of activities conducted by the operators. This program, so-called Monitoring Control Program (PCM) is a regulatory activity developed by the Environmental Impact Assessment Service (SEAIA) of IRD and has the aim of check the effectiveness of authorized self-control. Actually the regulatory control of environmental radiological integrity around the authorized nuclear installation essentially depends on the effectiveness of regulatory inspections fulfilled by the SEAIA/IRD. Due to the implementation of modern practices of management in the IRD, specially the quality management system on regulatory inspection activities, emerged the need of unify these actions. It was also necessary to establish standard procedures required for inspection conduction. This work proposes one methodology for the inspections of environmental radiological control suitable to assure the compliance and effectiveness of environmental and effluent monitoring programs conducted by the operator, through the systematic verification of compliance and data quality assessment. The proposed methodology seeks to attend the appeals for high control standards of environment protection and public health. Here, we presented as products of this work: The inspection handbook and checklists for inspections; one framework for sampling, handling, recording and reporting of

  2. Methodology to estimate parameters of an excitation system based on experimental conditions

    Energy Technology Data Exchange (ETDEWEB)

    Saavedra-Montes, A.J. [Carrera 80 No 65-223, Bloque M8 oficina 113, Escuela de Mecatronica, Universidad Nacional de Colombia, Medellin (Colombia); Calle 13 No 100-00, Escuela de Ingenieria Electrica y Electronica, Universidad del Valle, Cali, Valle (Colombia); Ramirez-Scarpetta, J.M. [Calle 13 No 100-00, Escuela de Ingenieria Electrica y Electronica, Universidad del Valle, Cali, Valle (Colombia); Malik, O.P. [2500 University Drive N.W., Electrical and Computer Engineering Department, University of Calgary, Calgary, Alberta (Canada)

    2011-01-15

    A methodology to estimate the parameters of a potential-source controlled rectifier excitation system model is presented in this paper. The proposed parameter estimation methodology is based on the characteristics of the excitation system. A comparison of two pseudo random binary signals, two sampling periods for each one, and three estimation algorithms is also presented. Simulation results from an excitation control system model and experimental results from an excitation system of a power laboratory setup are obtained. To apply the proposed methodology, the excitation system parameters are identified at two different levels of the generator saturation curve. The results show that it is possible to estimate the parameters of the standard model of an excitation system, recording two signals and the system operating in closed loop with the generator. The normalized sum of squared error obtained with experimental data is below 10%, and with simulation data is below 5%. (author)

  3. A new Methodology for Operations Strategy

    DEFF Research Database (Denmark)

    Koch, Christian; Rytter, Niels Gorm; Boer, Harry

    2005-01-01

    This paper proposes a new methodology for developing and implementing Operations Strategy (OS). It encompasses both content and process aspects of OS and differs thereby from many of the present OS methodologies. The paper outlines its paradigmatic foundation and presents aim, process, dimensions...

  4. Nonlinear Image Denoising Methodologies

    National Research Council Canada - National Science Library

    Yufang, Bao

    2002-01-01

    In this thesis, we propose a theoretical as well as practical framework to combine geometric prior information to a statistical/probabilistic methodology in the investigation of a denoising problem...

  5. Methodology for determining the effectiveness of implementing innovations and proposals for improving production in oil industry branches

    Energy Technology Data Exchange (ETDEWEB)

    Luzin, V I; Logachev, V M

    1980-01-01

    An appropriate technology is applied with a specialized method for determining the economic effectiveness of new technological inventions and efficiency in the national economy from 1977 until the present. An analogous project has also been developed in order to consider and examine specific elements of the oil industry. This project incorporates a specialized methodology to examine the principle factors behind oil production-extraction and associated with scientific-technical progress. This approach applies technical and efficiency proposals and considered new inventions during the planning stages in order to calculate the economic effectiveness of these new inputs. The principle methodological premise for the calculation of annual economic effectiveness during the planning stages is based upon economic stimulation inspired by new inventions and efficiency experts. A formula is provided for conducting such calculations. Examples are provided to illustrate how the annual economic effectiveness of a depulsator (a device used to improve the quality of separation for oil-gas mixtures while at the same time reducing oil loss) is calculated. The authors offer a detailed examination of methods used to accurately reflect the economic effectiveness of new technologies within the spheres of planning and calculating indicators for enterprises and production organization in the oil industry, both by individual branch, and for the entire industry.

  6. 76 FR 40379 - New Proposed Collection; Comment Request; Study Logistic Formative Research Methodology Studies...

    Science.gov (United States)

    2011-07-08

    ...; Comment Request; Study Logistic Formative Research Methodology Studies for the National Children's Study... Collection Title: Study Logistics Formative Research Methodology Studies for the National Children's Study... national longitudinal study of environmental influences (including physical, chemical, biological, and...

  7. Mapa digital de solos: uma proposta metodológica usando inferência fuzzy Digital soil map: a methodological proposal using fuzzy inference

    Directory of Open Access Journals (Sweden)

    Claudia C. Nolasco-Carvalho

    2009-02-01

    Full Text Available Elaborou-se um mapa digital de solos de uma área na região de Mucugê, BA, com o objetivo de avaliar o uso de geotecnologias na cartografia de solos. A metodologia desenvolvida a partir do modelo de inferência para solos - SoLIM , requer o conhecimento prévio da área por um especialista em mapeamento e está alicerçada na equação dos fatores de formação do solo e no modelo de distribuição dos solos na paisagem. Os dados, advindos do Modelo Digital do Terreno - MDT, da vegetação e da geologia, foram associados ao conhecimento do pedólogo e integrados em ambiente SIG (Sistema de Informações Geográficas sob inferência fuzzy. A modelagem por lógica fuzzy permitiu apontar as incertezas e transições da cobertura pedológica e gerou um mapa digital de solo que, quando comparado com o mapa convencional da área, mostrou menor generalização no domínio de espaços e parâmetros, ou seja, um refinamento da escala, porém a aplicabilidade da metodologia depende da validação de campo e da repetição em outras áreas.A digital soil map was elaborated for an area in the region of Mucugê-BA using data integration derived from a digital elevation model (DEM of the vegetation and geology that was associated with a soil scientist's knowledge and correlated in a GIS environment (Geography Information System under fuzzy inference, as a methodological proposal. The methodology was developed and based on the soil-land inference model - SoLIM, on the soil factor equation and the soil-landscape model. The fuzzy logic is able to simulate the uncertainty and transitions that often appear in pedologic systems. The results show that the methodology allows the generation of digital soil maps with increased scale and to reduce soil classe generalizations in the space and parameter domain. However, this methodology is very dependent upon the soil expert's knowledge and accuracy of the data base. To verify the applicability of the methodology the

  8. A proposal for transmission pricing methodology in Thailand based on electricity tracing and long-run average incremental cost

    International Nuclear Information System (INIS)

    Limpasuwan, T.; Bialek, J.W.; Ongsakul, W.; Limmeechokchai, B.

    2004-01-01

    Although there is no universally accepted methodology for restructuring of electricity supply industry, the transformations often involve separation of generation and transmission. Such separation results in a need for a transmission service charge to be levied on the system users. The National Energy Policy Office (NEPO) of Thailand has commissioned PricewaterhouseCooper (PwC) to propose a transmission service charge that is to be used during the market reform for the transmission business unit of the Electricity Generating Authority of Thailand (EGAT). Although the PwCs transmission use of system charge (TUOS) based on the long-run average incremental cost (LRAIC) and average transmission loss can satisfy the financial requirements, the charge allocations are not economically efficient since they do not provide any locational signal which could reflect costs imposed on the system by locating a system user in a particular geographical location. This paper describes the TUOS methodology suggested by PwC and makes a comparison with a transmission pricing method based on combination of the electricity tracing and LRAIC. The results indicate that, with electricity tracing, the charge allocations are improved in terms of fairness, as the charge reflects the geographical location and system conditions

  9. Managing mixed fisheries in the European western waters: application of Fcube methodology

    DEFF Research Database (Denmark)

    Iriondo, Ane; García, Dorleta; Santurtún, Marina

    2012-01-01

    Fisheries management is moving towards ecosystem based management instead of traditional single species based advice. To progress towards an ecosystem approach, a new methodology called “Fleet and Fisheries Forecast” (Fcube) has been proposed. In the application of the method, a precise initial f...... the lowest. In this analysis, Western Waters fleet management results show consistency between stocks and their respective TACs. The study highlights that it is possible to deliver advice within the context of mixed fisheries using the Fcube method......Fisheries management is moving towards ecosystem based management instead of traditional single species based advice. To progress towards an ecosystem approach, a new methodology called “Fleet and Fisheries Forecast” (Fcube) has been proposed. In the application of the method, a precise initial...

  10. APPROPRIATE ALLOCATION OF CONTINGENCY USING RISK ANALYSIS METHODOLOGY

    Directory of Open Access Journals (Sweden)

    Andi Andi

    2004-01-01

    Full Text Available Many cost overruns in the world of construction are attributable to either unforeseen events or foreseen events for which uncertainty was not appropriately accommodated. It is argued that a significant improvement to project management performance may result from greater attention to the process of analyzing project risks. The objective of this paper is to propose a risk analysis methodology for appropriate allocation of contingency in project cost estimation. In the first step, project risks will be identified. Influence diagramming technique is employed to identify and to show how the risks affect the project cost elements and also the relationships among the risks themselves. The second step is to assess the project costs with regards to the risks under consideration. Using a linguistic approach, the degree of uncertainty of identified project risks is assessed and quantified. The problem of dependency between risks is taken into consideration during this analysis. For the final step, as the main purpose of this paper, a method for allocating appropriate contingency is presented. Two types of contingencies, i.e. project contingency and management reserve are proposed to accommodate the risks. An illustrative example is presented at the end to show the application of the methodology.

  11. Methodology of Neural Design: Applications in Microwave Engineering

    Directory of Open Access Journals (Sweden)

    Z. Raida

    2006-06-01

    Full Text Available In the paper, an original methodology for the automatic creation of neural models of microwave structures is proposed and verified. Following the methodology, neural models of the prescribed accuracy are built within the minimum CPU time. Validity of the proposed methodology is verified by developing neural models of selected microwave structures. Functionality of neural models is verified in a design - a neural model is joined with a genetic algorithm to find a global minimum of a formulated objective function. The objective function is minimized using different versions of genetic algorithms, and their mutual combinations. The verified methodology of the automated creation of accurate neural models of microwave structures, and their association with global optimization routines are the most important original features of the paper.

  12. Selection methodology for LWR safety R and D programs and proposals. Volume III. User's manual for the multi-attribute utility package (MAUP)

    International Nuclear Information System (INIS)

    Hale, M.; Turnage, J.J.; Husseiny, A.A.; Ritzman, R.L.

    1981-02-01

    The computer program which was developed to apply the multi-attribute utility (MAU) methodology to the selection of LWR safety R and D programs and proposals is described. An overview of the MAU method is presented, followed by a description of the steps incorporated in developing individual modules for use in the multi-attribute utility package (MAUP). Each module is described complete with usage information and an example of computer output

  13. On the use of IRMS in forensic science: proposals for a methodological approach.

    Science.gov (United States)

    Gentile, Natacha; Besson, Luc; Pazos, Diego; Delémont, Olivier; Esseiva, Pierre

    2011-10-10

    The flourishing number of publications on the use of isotope ratio mass spectrometry (IRMS) in forensic science denotes the enthusiasm and the attraction generated by this technology. IRMS has demonstrated its potential to distinguish chemically identical compounds coming from different sources. Despite the numerous applications of IRMS to a wide range of forensic materials, its implementation in a forensic framework is less straightforward than it appears. In addition, each laboratory has developed its own strategy of analysis on calibration, sequence design, standards utilisation and data treatment without a clear consensus. Through the experience acquired from research undertaken in different forensic fields, we propose a methodological framework of the whole process using IRMS methods. We emphasize the importance of considering isotopic results as part of a whole approach, when applying this technology to a particular forensic issue. The process is divided into six different steps, which should be considered for a thoughtful and relevant application. The dissection of this process into fundamental steps, further detailed, enables a better understanding of the essential, though not exhaustive, factors that have to be considered in order to obtain results of quality and sufficiently robust to proceed to retrospective analyses or interlaboratory comparisons. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  14. Methodology for the Assessment of the Ecotoxicological Potential of Construction Materials

    Science.gov (United States)

    Rodrigues, Patrícia; Silvestre, José D.; Flores-Colen, Inês; Viegas, Cristina A.; de Brito, Jorge; Kurad, Rawaz; Demertzi, Martha

    2017-01-01

    Innovation in construction materials (CM) implies changing their composition by incorporating raw materials, usually non-traditional ones, which confer the desired characteristics. However, this practice may have unknown risks. This paper discusses the ecotoxicological potential associated with raw and construction materials, and proposes and applies a methodology for the assessment of their ecotoxicological potential. This methodology is based on existing laws, such as Regulation (European Commission) No. 1907/2006 (REACH—Registration, Evaluation, Authorization and Restriction of Chemicals) and Regulation (European Commission) No. 1272/2008 (CLP—Classification, Labelling and Packaging). Its application and validation showed that raw material without clear evidence of ecotoxicological potential, but with some ability to release chemicals, can lead to the formulation of a CM with a slightly lower hazardousness in terms of chemical characterization despite a slightly higher ecotoxicological potential than the raw materials. The proposed methodology can be a useful tool for the development and manufacturing of products and the design choice of the most appropriate CM, aiming at the reduction of their environmental impact and contributing to construction sustainability. PMID:28773011

  15. Methodology for the Assessment of the Ecotoxicological Potential of Construction Materials.

    Science.gov (United States)

    Rodrigues, Patrícia; Silvestre, José D; Flores-Colen, Inês; Viegas, Cristina A; de Brito, Jorge; Kurad, Rawaz; Demertzi, Martha

    2017-06-13

    Innovation in construction materials (CM) implies changing their composition by incorporating raw materials, usually non-traditional ones, which confer the desired characteristics. However, this practice may have unknown risks. This paper discusses the ecotoxicological potential associated with raw and construction materials, and proposes and applies a methodology for the assessment of their ecotoxicological potential. This methodology is based on existing laws, such as Regulation (European Commission) No. 1907/2006 (REACH-Registration, Evaluation, Authorization and Restriction of Chemicals) and Regulation (European Commission) No. 1272/2008 (CLP-Classification, Labelling and Packaging). Its application and validation showed that raw material without clear evidence of ecotoxicological potential, but with some ability to release chemicals, can lead to the formulation of a CM with a slightly lower hazardousness in terms of chemical characterization despite a slightly higher ecotoxicological potential than the raw materials. The proposed methodology can be a useful tool for the development and manufacturing of products and the design choice of the most appropriate CM, aiming at the reduction of their environmental impact and contributing to construction sustainability.

  16. UPCaD: A Methodology of Integration Between Ontology-Based Context-Awareness Modeling and Relational Domain Data

    Directory of Open Access Journals (Sweden)

    Vinícius Maran

    2018-01-01

    Full Text Available Context-awareness is a key feature for ubiquitous computing scenarios applications. Currently, technologies and methodologies have been proposed for the integration of context-awareness concepts in intelligent information systems to adapt them to the execution of services, user interfaces and data retrieval. Recent research proposed conceptual modeling alternatives to the integration of the domain modeling in RDBMS and context-awareness modeling. The research described using highly expressiveness ontologies. The present work describes the UPCaD (Unified Process for Integration between Context-Awareness and Domain methodology, which is composed of formalisms and processes to guide the data integration considering RDBMS and context modeling. The methodology was evaluated in a virtual learning environment application. The evaluation shows the possibility to use a highly expressive context ontology to filter the relational data query and discusses the main contributions of the methodology compared with recent approaches.

  17. Proposal of a methodology for quality control in thermoluminescent dosimetry laboratory

    International Nuclear Information System (INIS)

    Feital, Joao Carlos da S.; Almeida, Claudio Domingues de; Bezerra, Marcos A.

    2005-01-01

    Taken into account that in thermoluminescence dosimetry adequate selection procedures as well as accurate TLD readings are necessary, this paper presents results of methodology that can be applied as part of quality control programs in thermoluminescence dosimetry laboratories. For the experiment, a set of 200 TLDs ( LiF 100 ) were used and 9 from which were selected, a standard source of Cs -137 , a PTW kiln, a TL 'Harshaw' reader - model 5500 operating under the 'Win Rem' software and a Sr 90 / Y 90 'Bicron' irradiator. In the proceeding the selected dosimeters were irradiated and read 28 times during 18 months, then by one of the standard deviation properties, values up to 14 % were found, for a confidence level of 95 %. The results found and the bibliographic data related to the responses (arbitrary reading) in the crystals used in TLDs, have shown that this methodology can be applied in quality control programs. (author)

  18. A proposal of methodology for automatic indexation using noun phrases

    Directory of Open Access Journals (Sweden)

    Renato Rocha Souza

    2006-07-01

    Full Text Available It can be noticed that the indexing and representation strategies nowadays seems to be near the exhaustion, and it is worth to investigate new approaches to the indexing and information retrieving systems. Among these, a branch tries to consider the intrinsic semantics of the textual documents using noun phrases as descriptors instead of single keywords. We present in this article a methodology that was developed in the scope of a doctorate research.

  19. Methodology Used to Create System Architecture for its in Slovakia

    Directory of Open Access Journals (Sweden)

    Ales Janota

    2004-01-01

    Full Text Available The paper deals with an object oriented approach proposed by the authors for creation of the ITS system architecture in the Slovak Republic and shows how a reference architecture can be created as s base for future more detailed architectures (models. The authors characterise possible approaches, explain their relations to existing architectures and propose a methodology based on the Unifield Modelling language (UML. The main attention is paid to the logical part (logical view of the system architecture, that should result in the form of easy readable and understandable UML models.

  20. Methodological proposal for territorial distribution of the percentage reduction in gross inland energy consumption according to the EU energy policy strategic goal

    International Nuclear Information System (INIS)

    Tolon-Becerra, A.; Lastra-Bravo, X.; Botta, G.F.

    2010-01-01

    A 20% reduction in the consumption of energy is one of the main goals of the European Union's (EU) 20/20/20 Energy Strategy. But the uniform application of this overall goal to all of the countries is neither fair nor equitable, as it does not take into consideration the characteristics of the energy system in each Member State. This article therefore proposes a nonlinear distribution methodology with objective, dynamic goals for reducing gross inland energy consumption, according to the context and characteristics of each member state. We hope it will open discussion on how these overall goals can be weighted. Then we analyse the situation of the energy indicators related to energy efficiency in the reference year (2005) used by the EU for reaching its goal of reducing the gross inland consumption by 20% by 2020, and its progress from 1996 to 2007. Finally, the methodology proposed is applied to the year 2020 on the NUTS0 territorial level, that is, to members of the EU, according to the EUROSTAT Nomenclature of Territorial Units for Statistics (NUTS). Weighting is done based on energy intensity, per capita gross inland consumption and per capita energy intensity in two scenarios, the EU-15 and EU-27.

  1. A Data Preparation Methodology in Data Mining Applied to Mortality Population Databases.

    Science.gov (United States)

    Pérez, Joaquín; Iturbide, Emmanuel; Olivares, Víctor; Hidalgo, Miguel; Martínez, Alicia; Almanza, Nelva

    2015-11-01

    It is known that the data preparation phase is the most time consuming in the data mining process, using up to 50% or up to 70% of the total project time. Currently, data mining methodologies are of general purpose and one of their limitations is that they do not provide a guide about what particular task to develop in a specific domain. This paper shows a new data preparation methodology oriented to the epidemiological domain in which we have identified two sets of tasks: General Data Preparation and Specific Data Preparation. For both sets, the Cross-Industry Standard Process for Data Mining (CRISP-DM) is adopted as a guideline. The main contribution of our methodology is fourteen specialized tasks concerning such domain. To validate the proposed methodology, we developed a data mining system and the entire process was applied to real mortality databases. The results were encouraging because it was observed that the use of the methodology reduced some of the time consuming tasks and the data mining system showed findings of unknown and potentially useful patterns for the public health services in Mexico.

  2. A methodology for the characterization and diagnosis of cognitive impairments-Application to specific language impairment.

    Science.gov (United States)

    Oliva, Jesús; Serrano, J Ignacio; del Castillo, M Dolores; Iglesias, Angel

    2014-06-01

    The diagnosis of mental disorders is in most cases very difficult because of the high heterogeneity and overlap between associated cognitive impairments. Furthermore, early and individualized diagnosis is crucial. In this paper, we propose a methodology to support the individualized characterization and diagnosis of cognitive impairments. The methodology can also be used as a test platform for existing theories on the causes of the impairments. We use computational cognitive modeling to gather information on the cognitive mechanisms underlying normal and impaired behavior. We then use this information to feed machine-learning algorithms to individually characterize the impairment and to differentiate between normal and impaired behavior. We apply the methodology to the particular case of specific language impairment (SLI) in Spanish-speaking children. The proposed methodology begins by defining a task in which normal and individuals with impairment present behavioral differences. Next we build a computational cognitive model of that task and individualize it: we build a cognitive model for each participant and optimize its parameter values to fit the behavior of each participant. Finally, we use the optimized parameter values to feed different machine learning algorithms. The methodology was applied to an existing database of 48 Spanish-speaking children (24 normal and 24 SLI children) using clustering techniques for the characterization, and different classifier techniques for the diagnosis. The characterization results show three well-differentiated groups that can be associated with the three main theories on SLI. Using a leave-one-subject-out testing methodology, all the classifiers except the DT produced sensitivity, specificity and area under curve values above 90%, reaching 100% in some cases. The results show that our methodology is able to find relevant information on the underlying cognitive mechanisms and to use it appropriately to provide better

  3. Assessment of trends in desertification: A proposed methodology

    Science.gov (United States)

    Dejong, Andrew Gordon

    Desertification is most commonly accepted as "land degradation that occurs in arid, semi-arid, and dry sub-humid areas as a result of climatic variations and human activities." Primary influences include over-grazing, over-cultivation, exploitation of water resources and climate. Such influences lead to reduced productive capacity of land and potentially, desert-like conditions. Once degraded, the recovery of these natural systems may take decades or centuries. This research focused on two environments as case studies, Saskatchewan, Canada, and Bangladesh. Forecasts of desertification were depicted by integrating observed meteorological data, general circulation model (GCM) projections and a range of physical, biological and social indicators to create maps that depict the regions at greatest risk of desertification. Using GIS software, a thematic layer was employed for each indicator and they were integrated to form a single map of desertification. This methodology was found capable for identifying areas at risk of desertification in Saskatchewan and Bangladesh.

  4. Towards more sustainable management of European food waste: Methodological approach and numerical application.

    Science.gov (United States)

    Manfredi, Simone; Cristobal, Jorge

    2016-09-01

    Trying to respond to the latest policy needs, the work presented in this article aims at developing a life-cycle based framework methodology to quantitatively evaluate the environmental and economic sustainability of European food waste management options. The methodology is structured into six steps aimed at defining boundaries and scope of the evaluation, evaluating environmental and economic impacts and identifying best performing options. The methodology is able to accommodate additional assessment criteria, for example the social dimension of sustainability, thus moving towards a comprehensive sustainability assessment framework. A numerical case study is also developed to provide an example of application of the proposed methodology to an average European context. Different options for food waste treatment are compared, including landfilling, composting, anaerobic digestion and incineration. The environmental dimension is evaluated with the software EASETECH, while the economic assessment is conducted based on different indicators expressing the costs associated with food waste management. Results show that the proposed methodology allows for a straightforward identification of the most sustainable options for food waste, thus can provide factual support to decision/policy making. However, it was also observed that results markedly depend on a number of user-defined assumptions, for example on the choice of the indicators to express the environmental and economic performance. © The Author(s) 2016.

  5. Methodology to remediate a mixed waste site

    International Nuclear Information System (INIS)

    Berry, J.B.

    1994-08-01

    In response to the need for a comprehensive and consistent approach to the complex issue of mixed waste management, a generalized methodology for remediation of a mixed waste site has been developed. The methodology is based on requirements set forth in the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) and the Resource Conservation and Recovery Act (RCRA) and incorporates ''lessons learned'' from process design, remediation methodologies, and remediation projects. The methodology is applied to the treatment of 32,000 drums of mixed waste sludge at the Oak Ridge K-25 Site. Process technology options are developed and evaluated, first with regard to meeting system requirements and then with regard to CERCLA performance criteria. The following process technology options are investigated: (1) no action, (2) separation of hazardous and radioactive species, (3) dewatering, (4) drying, and (5) solidification/stabilization. The first two options were eliminated from detailed consideration because they did not meet the system requirements. A quantitative evaluation clearly showed that, based on system constraints and project objectives, either dewatering or drying the mixed waste sludge was superior to the solidification/stabilization process option. The ultimate choice between the drying and the dewatering options will be made on the basis of a technical evaluation of the relative merits of proposals submitted by potential subcontractors

  6. Methodology to remediate a mixed waste site

    Energy Technology Data Exchange (ETDEWEB)

    Berry, J.B.

    1994-08-01

    In response to the need for a comprehensive and consistent approach to the complex issue of mixed waste management, a generalized methodology for remediation of a mixed waste site has been developed. The methodology is based on requirements set forth in the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) and the Resource Conservation and Recovery Act (RCRA) and incorporates ``lessons learned`` from process design, remediation methodologies, and remediation projects. The methodology is applied to the treatment of 32,000 drums of mixed waste sludge at the Oak Ridge K-25 Site. Process technology options are developed and evaluated, first with regard to meeting system requirements and then with regard to CERCLA performance criteria. The following process technology options are investigated: (1) no action, (2) separation of hazardous and radioactive species, (3) dewatering, (4) drying, and (5) solidification/stabilization. The first two options were eliminated from detailed consideration because they did not meet the system requirements. A quantitative evaluation clearly showed that, based on system constraints and project objectives, either dewatering or drying the mixed waste sludge was superior to the solidification/stabilization process option. The ultimate choice between the drying and the dewatering options will be made on the basis of a technical evaluation of the relative merits of proposals submitted by potential subcontractors.

  7. Methodologies for Improved Tag Cloud Generation with Clustering

    DEFF Research Database (Denmark)

    Leginus, Martin; Dolog, Peter; Lage, Ricardo Gomes

    2012-01-01

    Tag clouds are useful means for navigation in the social web systems. Usually the systems implement the tag cloud generation based on tag popularity which is not always the best method. In this paper we propose methodologies on how to combine clustering into the tag cloud generation to improve...... coverage and overlap. We study several clustering algorithms to generate tag clouds. We show that by extending cloud generation based on tag popularity with clustering we slightly improve coverage. We also show that if the cloud is generated by clustering independently of the tag popularity baseline we...

  8. Methodology for economic evaluation of software development projects

    International Nuclear Information System (INIS)

    Witte, D.M.

    1990-01-01

    Many oil and gas exploration and production companies develop computer software in-house or with contract programmers to support their exploration activities. Software development projects compete for funding with exploration and development projects, though most companies lack valid comparison measures for the two types of projects. This paper presents a methodology of pro form a cash flow analysis for software development proposals intended for internal use. This methodology, based on estimates of development and support costs, exploration benefits, and probability of successful development and implementation, can be used to compare proposed software development projects directly with competing exploration proposals

  9. METAHEURISTICS EVALUATION: A PROPOSAL FOR A MULTICRITERIA METHODOLOGY

    Directory of Open Access Journals (Sweden)

    Valdir Agustinho de Melo

    2015-12-01

    Full Text Available ABSTRACT In this work we propose a multicriteria evaluation scheme for heuristic algorithms based on the classic Condorcet ranking technique. Weights are associated to the ranking of an algorithm among a set being object of comparison. We used five criteria and a function on the set of natural numbers to create a ranking. The discussed comparison involves three well-known problems of combinatorial optimization - Traveling Salesperson Problem (TSP, Capacitated Vehicle Routing Problem (CVRP and Quadratic Assignment Problem (QAP. The tested instances came from public libraries. Each algorithm was used with essentially the same structure, the same local search was applied and the initial solutions were similarly built. It is important to note that the work does not make proposals involving algorithms: the results for the three problems are shown only to illustrate the operation of the evaluation technique. Four metaheuristics - GRASP, Tabu Search, ILS and VNS - are therefore only used for the comparisons.

  10. Experimental methodology for obtaining sound absorption coefficients

    Directory of Open Access Journals (Sweden)

    Carlos A. Macía M

    2011-07-01

    Full Text Available Objective: the authors propose a new methodology for estimating sound absorption coefficients using genetic algorithms. Methodology: sound waves are generated and conducted along a rectangular silencer. The waves are then attenuated by the absorbing material covering the silencer’s walls. The attenuated sound pressure level is used in a genetic algorithm-based search to find the parameters of the proposed attenuation expressions that include geometric factors, the wavelength and the absorption coefficient. Results: a variety of adjusted mathematical models were found that make it possible to estimate the absorption coefficients based on the characteristics of a rectangular silencer used for measuring the attenuation of the noise that passes through it. Conclusions: this methodology makes it possible to obtain the absorption coefficients of new materials in a cheap and simple manner. Although these coefficients might be slightly different from those obtained through other methodologies, they provide solutions within the engineering accuracy ranges that are used for designing noise control systems.

  11. A Methodology for Quality Problems Diagnosis in SMEs

    OpenAIRE

    Humberto N. Teixeira; Isabel S. Lopes; Sérgio D. Sousa

    2012-01-01

    This article proposes a new methodology to be used by SMEs (Small and Medium enterprises) to characterize their performance in quality, highlighting weaknesses and area for improvement. The methodology aims to identify the principal causes of quality problems and help to prioritize improvement initiatives. This is a self-assessment methodology that intends to be easy to implement by companies with low maturity level in quality. The methodology is organized in six different steps which include...

  12. THE PROPOSED METHODOLOGIES FOR THE SIX SIGMA METHOD AND TQM STRATEGY AS WELL AS THEIR APPLICATION IN PRACTICE IN MACEDONIA

    Directory of Open Access Journals (Sweden)

    Elizabeta Mitreva

    2014-05-01

    Full Text Available This paper presents the proposed methodologies for the Six Sigma method and the TQM strategy as well as their application in practice in Macedonia. Although the philosophy of the total quality management (TQM is deeply involved in many industries and business areas of European and other countries it is insufficiently known and present in our country and other developing countries. The same applies to the Six Sigma approach of reducing the dispersion of a process and it is present in a small fraction in Macedonian companies. The results of the implementation have shown that the application of the Six Sigma approach does not refer to the number of defects per million opportunities but to the systematic and systemic lowering of the dispersion process. The operation and effect of the implementation of the six sigma method engages experts that receive a salary depending on the success of the Six Sigma program. On other hand the results of the application of the TQM methodology within the Macedonian companies will depend on the commitment of all employees and their motivation.

  13. A proposed reductionist solution to address the methodological challenges of inconsistent reflexology maps and poor experimental controls in reflexology research: a discussion paper.

    Science.gov (United States)

    Jones, Jenny; Thomson, Patricia; Lauder, William; Leslie, Stephen J

    2013-03-01

    Reflexology is a complex massage intervention, based on the concept that specific areas of the feet (reflex points) correspond to individual internal organs within the body. Reflexologists trained in the popular Ingham reflexology method claim that massage to these points, using massage techniques unique to reflexology, stimulates an increase in blood supply to the corresponding organ. Reflexology researchers face two key methodological challenges that need to be addressed if a specific treatment-related hemodynamic effect is to be scientifically demonstrated. The first is the problem of inconsistent reflexology foot maps; the second is the issue of poor experimental controls. This article proposes a potential experimental solution that we believe can address both methodological challenges and in doing so, allow any specific hemodynamic treatment effect unique to reflexology to experimentally reveal itself.

  14. [Proposed difficult airway teaching methodology. Presentation of an interactive fresh frozen cadaver model].

    Science.gov (United States)

    Catalá Bauset, J C; de Andres Ibañez, J A; Valverde Navarro, A; Martinez Soriano, F

    2014-04-01

    The aim of this paper is to present a methodology based on the use of fresh-frozen cadavers for training in the management of the airway, and to evaluate the degree of satisfaction among learning physicians. About 6 fresh-frozen cadavers and 14 workstations were prepared where participants were trained in the different skills needed for airway management. The details of preparation of the cadavers are described. The level of satisfaction of the participant was determined using a Likert rating scale of 5 points, at each of the 14 stations, as well as the overall assessment and clinical usefulness of the course. The mean overall evaluation of the course and its usefulness was 4.75 and 4.9, out of 5, respectively. All parts of the course were rated above 4 out of 5. The high level of satisfaction of the course remained homogeneous in the 2 editions analysed. The overall satisfaction of the course was not finally and uniquely determined by any of its particular parts. The fresh cadaver model for training physicians in techniques of airway management is a proposal satisfactory to the participant, and with a realism that approaches the live patient. Copyright © 2013 Sociedad Española de Anestesiología, Reanimación y Terapéutica del Dolor. Published by Elsevier España. All rights reserved.

  15. 78 FR 52806 - Periodic Reporting (Proposals One Through Five)

    Science.gov (United States)

    2013-08-26

    .... Proposal Four: Change in Canada Air Transportation Costing Methodology The Postal Service proposes revising its costing methodology for Air Transportation of outbound products to Canada. This is expected to... costs between Canada and the rest of the world during the ``Booking'' process. In essence, the Postal...

  16. A Modeling methodology for NoSQL Key-Value databases

    Directory of Open Access Journals (Sweden)

    Gerardo ROSSEL

    2017-08-01

    Full Text Available In recent years, there has been an increasing interest in the field of non-relational databases. However, far too little attention has been paid to design methodology. Key-value data stores are an important component of a class of non-relational technologies that are grouped under the name of NoSQL databases. The aim of this paper is to propose a design methodology for this type of database that allows overcoming the limitations of the traditional techniques. The proposed methodology leads to a clean design that also allows for better data management and consistency.

  17. A Dynamic Defense Modeling and Simulation Methodology using Semantic Web Services

    Directory of Open Access Journals (Sweden)

    Kangsun Lee

    2010-04-01

    Full Text Available Defense Modeling and Simulations require interoperable and autonomous federates in order to fully simulate complex behavior of war-fighters and to dynamically adapt themselves to various war-game events, commands and controls. In this paper, we propose a semantic web service based methodology to develop war-game simulations. Our methodology encapsulates war-game logic into a set of web services with additional semantic information in WSDL (Web Service Description Language and OWL (Web Ontology Language. By utilizing dynamic discovery and binding power of semantic web services, we are able to dynamically reconfigure federates according to various simulation events. An ASuW (Anti-Surface Warfare simulator is constructed to demonstrate the methodology and successfully shows that the level of interoperability and autonomy can be greatly improved.

  18. INTEGRATED METHODOLOGY FOR PRODUCT PLANNING USING MULTI CRITERIA ANALYSIS

    Directory of Open Access Journals (Sweden)

    Tarun Soota

    2016-09-01

    Full Text Available Integrated approach to multi-criteria decision problems is proposed using quality function deployment and analytical network process. The objective of the work is to rationalize and improve the method of analyzing and interpreting customer needs and technical requirements. The methodology is used to determine, prioritize engineering requirements based on customer needs for development of best product. Framework allows decision maker to decompose a complex problem in a hierarchical structure to show relationship between objective and criteria. Multi-criteria decision modeling is used for extending the hierarchy process to both dependence and feedback. A case study on bikes is presented for the proposed model.

  19. Forest planning at territory level: a methodological proposal

    Directory of Open Access Journals (Sweden)

    Agnoloni S

    2009-05-01

    Full Text Available This paper describes goals and methodologies of the Land Plan for Forest and Natural Environment Management Guidance (PFTI stemming from the Ri.Selv.Italia national project (within the “Forest Land Planning” 4.2 subproject. The PFTI geographic range of application is at an intermediate level between single forest-management-unit-level plan and regional forest plans, and deals with forest and pastures resources management. PFTI’s main purposes concern forest resource and forest economy analysis and assessment of the benefits that can be provided to local population through a rational forest management, taking into account also the social structure and potential local conflicts. PFTI’s final task is then to weigh up all these issues in order to give specific participated forest management guidelines at a territorial scale. Unlike the forest-management-unit-level plan, whose specific duties are predetermined and fixed, the PFTI is not necessarily a mandatory plan. On the opposite, PFTI should suggest several specific silviculture guidelines and alternative management scenarios.

  20. Methodology based on genetic heuristics for in-vivo characterizing the patient-specific biomechanical behavior of the breast tissues.

    Science.gov (United States)

    Lago, M A; Rúperez, M J; Martínez-Martínez, F; Martínez-Sanchis, S; Bakic, P R; Monserrat, C

    2015-11-30

    This paper presents a novel methodology to in-vivo estimate the elastic constants of a constitutive model proposed to characterize the mechanical behavior of the breast tissues. An iterative search algorithm based on genetic heuristics was constructed to in-vivo estimate these parameters using only medical images, thus avoiding invasive measurements of the mechanical response of the breast tissues. For the first time, a combination of overlap and distance coefficients were used for the evaluation of the similarity between a deformed MRI of the breast and a simulation of that deformation. The methodology was validated using breast software phantoms for virtual clinical trials, compressed to mimic MRI-guided biopsies. The biomechanical model chosen to characterize the breast tissues was an anisotropic neo-Hookean hyperelastic model. Results from this analysis showed that the algorithm is able to find the elastic constants of the constitutive equations of the proposed model with a mean relative error of about 10%. Furthermore, the overlap between the reference deformation and the simulated deformation was of around 95% showing the good performance of the proposed methodology. This methodology can be easily extended to characterize the real biomechanical behavior of the breast tissues, which means a great novelty in the field of the simulation of the breast behavior for applications such as surgical planing, surgical guidance or cancer diagnosis. This reveals the impact and relevance of the presented work.

  1. Methodology for formulating predictions of stress corrosion cracking life

    International Nuclear Information System (INIS)

    Yamauchi, Kiyoshi; Hattori, Shigeo; Shindo, Takenori; Kuniya, Jiro

    1994-01-01

    This paper presents a methodology for formulating predictions to evaluate the stress corrosion cracking (SCC) potential of each light-water reactor component, where an index is introduced as a life index or F index. The index denotes the SCC time ratio of a given SCC system to be evaluated against a reference SCC system. The life index is expressed by the products of several subdivided life indexes, which correspond to each SCC influencing factor. Each subdivided life index is constructed as a function containing the influencing factor variable, obtained by analyzing experimental SCC life data. The methodology was termed the subdivided factor method. Application of the life index to SCC life data and field data showed that it was effective for evaluating the SCC potential, i.e. the SCC life. Accordingly, the proposed methodology can potentially describe a phenomenon expressed by a function which consists of the variables of several influencing factors whether there are formulae which unite as a physical model or not. ((orig.))

  2. Assessment of radiotherapy photon beams: A practical and low cost methodology

    International Nuclear Information System (INIS)

    Reis, C.Q.M.; Nicolucci, P.

    2017-01-01

    Dosimetric properties of radiation beams used in radiotherapy are directly related to the energy spectrum produced by the treatment unit. Therefore, the development of methodologies to evaluate in a simple and accurate way the spectra of clinical beams can help establishing the quality control of the treatment. The purpose of this study is to present a practical and low cost methodology for determining primary spectra of radiotherapy photon beams from transmission measurements in attenuators of aluminum and using the method of the inverse Laplace transform. Monte Carlo simulation with PENELOPE code was used in order to evaluate and validate the reconstructed spectra by the calculation of dosimetric parameters that characterize the beam. Percentage depth dose values simulated with a 6 MV reconstructed spectrum shows maximum difference of 4.4% when compared to values measured at the corresponding clinical beam. For a 10 MV beam that difference was around 4.2%. Results obtained in this study confirm the adequacy of the proposed methodology for assessing primary photon beams produced by clinical accelerators. - Highlights: • Primary spectra of radiotherapy photon beams are determined from transmission measurements. • Monte Carlo calculations are used to evaluate the method of the inverse Laplace transform. • The proposed methodology is practical and of low cost for clinical purposes. • Results are in fair agreement with literature and clinical data.

  3. A novel meta-heuristic optimization methodology for solving various types of economic dispatch problem

    Energy Technology Data Exchange (ETDEWEB)

    Fesanghary, M. [Department of Mechanical Engineering, Louisiana State University, 2508 Patrick Taylor Hall, Baton Rouge, LA 70808 (United States); Ardehali, M.M. [Energy Research Center, Department of Electrical Engineering, Amirkabir University of Technology (Tehran Polytechnic), 424-Hafez Avenue, 15875-4413 Tehran (Iran)

    2009-06-15

    The increasing costs of fuel and operation of thermal power generating units warrant development of optimization methodologies for economic dispatch (ED) problems. Optimization methodologies that are based on meta-heuristic procedures could assist power generation policy analysts to achieve the goal of minimizing the generation costs. In this context, the objective of this study is to present a novel approach based on harmony search (HS) algorithm for solving ED problems, aiming to provide a practical alternative for conventional methods. To demonstrate the efficiency and applicability of the proposed method and for the purposes of comparison, various types of ED problems are examined. The results of this study show that the new proposed approach is able to find more economical loads than those determined by other methods. (author)

  4. Methodology for performing measurements to release material from radiological control

    International Nuclear Information System (INIS)

    Durham, J.S.; Gardner, D.L.

    1993-09-01

    This report describes the existing and proposed methodologies for performing measurements of contamination prior to releasing material for uncontrolled use at the Hanford Site. The technical basis for the proposed methodology, a modification to the existing contamination survey protocol, is also described. The modified methodology, which includes a large-area swipe followed by a statistical survey, can be used to survey material that is unlikely to be contaminated for release to controlled and uncontrolled areas. The material evaluation procedure that is used to determine the likelihood of contamination is also described

  5. Risk-assessment methodology for fast breeder reactors

    International Nuclear Information System (INIS)

    Ott, K.O.

    1976-04-01

    The methods applied or proposed for risk assessment of nuclear reactors are reviewed, particularly with respect to their applicability for risk assessment of future commercial fast breeder reactors. All methods are based on the calculation of accident consequences for relatively few accident scenarios. The role and general impact of uncertainties in fast-reactor accident analysis are discussed. The discussion shows the need for improvement of the methodology. A generalized and improved risk-assessment methodology is outlined and proposed (accident-spectra-progression approach). The generalization consists primarily of an explicit treatment of uncertainties throughout the accident progression. The results of this method are obtained in form of consequence distributions. The width and shape of the distributions depend in part on the superposition of the uncertainties. The first moment of the consequence distribution gives an improved prediction of the ''average'' consequence. The higher-consequence moments can be used for consideration of risk aversion. The assessment of the risk of one or a certain number of nuclear reactors can only provide an ''isolated'' risk assessment. The general problem of safety risk assessment and its relation to public acceptance of certain modes of power production is a much broader problem area, which is also discussed

  6. Methodology for assessing the impacts of distributed generation interconnection

    Directory of Open Access Journals (Sweden)

    Luis E. Luna

    2011-06-01

    Full Text Available This paper proposes a methodology for identifying and assessing the impact of distributed generation interconnection on distribution systems using Monte Carlo techniques. This methodology consists of two analysis schemes: a technical analysis, which evaluates the reliability conditions of the distribution system; on the other hand, an economic analysis that evaluates the financial impacts on the electric utility and its customers, according to the system reliability level. The proposed methodology was applied to an IEEE test distribution system, considering different operation schemes for the distributed generation interconnection. The application of each one of these schemes provided significant improvements regarding the reliability and important economic benefits for the electric utility. However, such schemes resulted in negative profitability levels for certain customers, therefore, regulatory measures and bilateral contracts were proposed which would provide a solution for this kind of problem.

  7. A unique application of the instream flow incremental methodology (IFIM) to predict impacts on riverine aquatic habitat, resulting from construction of a proposed hydropower reservoir

    International Nuclear Information System (INIS)

    Foote, P.S.

    1999-01-01

    The City of Harrisburg, Pennsylvania, proposed to construct a new low-head hydroelectric project on the Susquehanna River in the central part of the state in 1986, about 108 km upstream of the river mouth. As part of the licensing process, the city was required by the Federal Energy Regulatory Commission to carry out studies that would forecast the impacts on riverine aquatic habitat as a result of construction of the proposed 13 km long by 1.5 km wide reservoir. The methodology selected by the city and its consultants was to use the IFIM to model the habitat conditions in the project reach both before and after construction of the proposed reservoir.The IFIM is usually used to model instream flow releases downstream of dams and diversions, and had not been used before to model habitat conditions within the proposed reservoir area. The study team hydraulically modelled the project reach using existing hydraulic data, and a HEC-2 backwater analysis to determine post-project water surface elevations. The IFG-4 model was used to simulate both pre- and post-project water velocities, by distributing velocities across transects based on known discharges and cell depth. Effects on aquatic habitat were determined using the IFIM PHABSIM program, in which criteria for several evaluation species and life stages were used to yield estimates of Weighted Usable Area. The analysis showed, based on trends in WUA from pre- and post-project conditions, that habitat conditions would improve for several species and life stages, and would be negatively affected for fewer life stages and species. Some agency concerns that construction of the proposed reservoir would have significant adverse effects on the resident and anadromous fish populations were responded to using these results

  8. Methodological guidelines for geoheritage site assessment: A proposal for Serbia

    Directory of Open Access Journals (Sweden)

    Maran-Stevanović Aleksandra

    2015-01-01

    Full Text Available Various minerals, rocks, soil types, ore and fossiliferous deposits, structural and tectonic elements, surface and subterranean landforms, all those natural phenomena representing geodiversity in a small scale contribute to our understanding the significant events and episodes of the geological history of the Earth. Intended methodology for qualitative and quantitative assessment is presented, including valuing criteria and their numerical indicators, which serve as analytical instruments to identify and select potential geoheritage objects in Serbia. Objective assessing and categorizing the geoheritage objects are the starting points for their rational utilization, adequate conservation, proper interpretation and promotion.

  9. Evaluation and assessment of nuclear power plant seismic methodology

    International Nuclear Information System (INIS)

    Bernreuter, D.; Tokarz, F.; Wight, L.; Smith, P.; Wells, J.; Barlow, R.

    1977-01-01

    The major emphasis of this study is to develop a methodology that can be used to assess the current methods used for assuring the seismic safety of nuclear power plants. The proposed methodology makes use of system-analysis techniques and Monte Carlo schemes. Also, in this study, we evaluate previous assessments of the current seismic-design methodology

  10. Evaluation and assessment of nuclear power plant seismic methodology

    Energy Technology Data Exchange (ETDEWEB)

    Bernreuter, D.; Tokarz, F.; Wight, L.; Smith, P.; Wells, J.; Barlow, R.

    1977-03-01

    The major emphasis of this study is to develop a methodology that can be used to assess the current methods used for assuring the seismic safety of nuclear power plants. The proposed methodology makes use of system-analysis techniques and Monte Carlo schemes. Also, in this study, we evaluate previous assessments of the current seismic-design methodology.

  11. Risk-Informed Assessment Methodology Development and Application

    International Nuclear Information System (INIS)

    Sung Goo Chi; Seok Jeong Park; Chul Jin Choi; Ritterbusch, S.E.; Jacob, M.C.

    2002-01-01

    Westinghouse Electric Company (WEC) has been working with Korea Power Engineering Company (KOPEC) on a US Department of Energy (DOE) sponsored Nuclear Energy Research Initiative (NERI) project through a collaborative agreement established for the domestic NERI program. The project deals with Risk-Informed Assessment (RIA) of regulatory and design requirements of future nuclear power plants. An objective of the RIA project is to develop a risk-informed design process, which focuses on identifying and incorporating advanced features into future nuclear power plants (NPPs) that would meet risk goals in a cost-effective manner. The RIA design methodology is proposed to accomplish this objective. This paper discusses the development of this methodology and demonstrates its application in the design of plant systems for future NPPs. Advanced conceptual plant systems consisting of an advanced Emergency Core Cooling System (ECCS) and Emergency Feedwater System (EFWS) for a NPP were developed and the risk-informed design process was exercised to demonstrate the viability and feasibility of the RIA design methodology. Best estimate Loss-of-Coolant Accident (LOCA) analyses were performed to validate the PSA success criteria for the NPP. The results of the analyses show that the PSA success criteria can be met using the advanced conceptual systems and that the RIA design methodology is a viable and appropriate means of designing key features of risk-significant NPP systems. (authors)

  12. Implementation impacts of PRL methodology

    International Nuclear Information System (INIS)

    Caudill, J.A.; Krupa, J.F.; Meadors, R.E.; Odum, J.V.; Rodrigues, G.C.

    1993-02-01

    This report responds to a DOE-SR request to evaluate the impacts from implementation of the proposed Plutonium Recovery Limit (PRL) methodology. The PRL Methodology is based on cost minimization for decisions to discard or recover plutonium contained in scrap, residues, and other plutonium bearing materials. Implementation of the PRL methodology may result in decisions to declare as waste certain plutonium bearing materials originally considered to be a recoverable plutonium product. Such decisions may have regulatory impacts, because any material declared to be waste would immediately be subject to provisions of the Resource Conservation and Recovery Act (RCRA). The decision to discard these materials will have impacts on waste storage, treatment, and disposal facilities. Current plans for the de-inventory of plutonium processing facilities have identified certain materials as candidates for discard based upon the economic considerations associated with extending the operating schedules for recovery of the contained plutonium versus potential waste disposal costs. This report evaluates the impacts of discarding those materials as proposed by the F Area De-Inventory Plan and compares the De-Inventory Plan assessments with conclusions from application of the PRL. The impact analysis was performed for those materials proposed as potential candidates for discard by the De-Inventory Plan. The De-Inventory Plan identified 433 items, containing approximately 1% of the current SRS Pu-239 inventory, as not appropriate for recovery as the site moves to complete the mission of F-Canyon and FB-Line. The materials were entered into storage awaiting recovery as product under the Department's previous Economic Discard Limit (EDL) methodology which valued plutonium at its incremental cost of production in reactors. An application of Departmental PRLs to the subject 433 items revealed that approximately 40% of them would continue to be potentially recoverable as product plutonium

  13. Learning and innovation: a methodological proposal from the teaching of Media Management

    Directory of Open Access Journals (Sweden)

    F Peinado-Miguel

    2013-02-01

    Full Text Available After its adaptation to the EHEA, the Department of Journalism IV of the Complutense University of Madrid began a project of methodological renovation and educational innovation –linked to an R&D project– in the teaching of Media Management, with the aim of providing future communication professionals with the skills required by the new business reality. The project was developed in different stages and was structured along the following lines of action: use of ICTs and Web 2.0 tools to develop activities that put new energy into the learning process: podcasts, interviews with executive directors and managers, entrepreneurial projects 2.0, intensive use of the Virtual Campus and blogs. In addition the teaching innovation project involved collaborative work to resolve real cases, with the implementation of the Educlick system’s software and hardware. This article presents the foundations and results of the new learning methodology model, which could be extrapolated to the teaching of other subjects of journalism

  14. A Novel Consensus-Based Particle Swarm Optimization-Assisted Trust-Tech Methodology for Large-Scale Global Optimization.

    Science.gov (United States)

    Zhang, Yong-Feng; Chiang, Hsiao-Dong

    2017-09-01

    A novel three-stage methodology, termed the "consensus-based particle swarm optimization (PSO)-assisted Trust-Tech methodology," to find global optimal solutions for nonlinear optimization problems is presented. It is composed of Trust-Tech methods, consensus-based PSO, and local optimization methods that are integrated to compute a set of high-quality local optimal solutions that can contain the global optimal solution. The proposed methodology compares very favorably with several recently developed PSO algorithms based on a set of small-dimension benchmark optimization problems and 20 large-dimension test functions from the CEC 2010 competition. The analytical basis for the proposed methodology is also provided. Experimental results demonstrate that the proposed methodology can rapidly obtain high-quality optimal solutions that can contain the global optimal solution. The scalability of the proposed methodology is promising.

  15. Design Methodology of a Sensor Network Architecture Supporting Urgent Information and Its Evaluation

    Science.gov (United States)

    Kawai, Tetsuya; Wakamiya, Naoki; Murata, Masayuki

    Wireless sensor networks are expected to become an important social infrastructure which helps our life to be safe, secure, and comfortable. In this paper, we propose design methodology of an architecture for fast and reliable transmission of urgent information in wireless sensor networks. In this methodology, instead of establishing single complicated monolithic mechanism, several simple and fully-distributed control mechanisms which function in different spatial and temporal levels are incorporated on each node. These mechanisms work autonomously and independently responding to the surrounding situation. We also show an example of a network architecture designed following the methodology. We evaluated the performance of the architecture by extensive simulation and practical experiments and our claim was supported by the results of these experiments.

  16. Proposal of methodology for calculating the degree of impact caused by perturbations recorded in a power transmission system; Proposicao de metodologia para calcular o grau de impacto causado pelas perturbacoes registradas em um sistema eletrico de transmissao

    Energy Technology Data Exchange (ETDEWEB)

    Vianna, E.A.L. [Centrais Eletricas do Norte (ELETRONORTE), Porto Velho, RO (Brazil)], E-mail: elainelimavianna@yahoo.com.br; Lambert-Torres, G.; Silva, L.E.B. da [Universidade Federal de Itajuba (UNIFEI), MG (Brazil)], Emails: germanoltorres@gmail.com, leborges@unifei.edu.br; Rissino, S.; Silva, M.F. da [Universidade Federal de Rondonia (UFRO), Porto Velho, RO (Brazil)], Emails: srissino@gmail.com, felipe@unir.br

    2009-07-01

    Disturbances recorded in a electric power system compromise the quality and continuity energy supply and are measured by means of performance indicators. This article defines the attributes that contribute to increased the severity of disturbances recorded in an Electrical Power Transmission and proposes a methodology for calculating the degree of impact caused each of them. The proposed methodology allows quantification of the impact caused by a disturbance, and its comparison with other disturbance, in one system or distinct systems.

  17. Development of a methodology for the determination of radionuclides by Icp-SFMS

    International Nuclear Information System (INIS)

    Mendez G, C. G.; Romero G, E. T.; Hernandez M, H.; Solis R, C.; Chavez L, E. R.

    2016-09-01

    A methodology was established for the determination of "7"5As, "2"0"2Hg, "2"0"8Pb, "6"0Ni, "2"3"2Th, "2"3"4U, "2"3"5U, "2"3"8U, by magnetic field inductive coupling mass spectrometry (Icp-SFMS) of various samples at the National Laboratory of Nuclear Forensic Research of the Instituto Nacional de Investigaciones Nucleares (ININ) in order to determine radionuclides in aerosol samples. The concentrations calculation of "7"5As, "2"0"2Hg, "2"0"8Pb and "6"0Ni allowed to validate the reliability of the proposed methodology when comparing the concentrations obtained with the application of the same and the concentrations of the same elements reported for the Certified Reference Material (CRM) of particulate atmospheric material of an urban area (Nist 1648-a), the comparison showed that the proposed methodology is feasible for the determination of not only radionuclides, but also for these trace elements. Detection and quantification limits of the order of microns of ng L"-"1 were reached, corroborating with this the acceptance of the proposed methodology. Concentrations of the radionuclides of interest for CRM could be calculated. The concentrations of the radionuclides found in white samples and of the reagents used in the processing of the aerosol filters indicated that the calculations found belong to or correspond to the calculations that are reflected in the background measurement. Concentrations of "2"3"2Th, "2"3"4U, "2"3"5U and "2"3"8U in aerosols of the Cuernavaca City, Morelos (Mexico) showed higher values than those established by the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR), however the concentration of the radioisotopes per unit volume are within the typical values reported for the northern hemisphere; the value of isotopic ratios greater than unity point to the influence of anthropogenic activities or environmental factors such as the direction of the wind or the imbalance of these radionuclides in the atmosphere

  18. A Methodology for Assessing Software Releasibility

    National Research Council Canada - National Science Library

    Kochan, Matthew

    1997-01-01

    .... This thesis proposes a new methodology which addresses this tradeoff. The term "releasable" Software is introduced as a product which demonstrates a fault content acceptable to users in the field...

  19. Gamma ray auto absorption correction evaluation methodology

    International Nuclear Information System (INIS)

    Gugiu, Daniela; Roth, Csaba; Ghinescu, Alecse

    2010-01-01

    Neutron activation analysis (NAA) is a well established nuclear technique, suited to investigate the microstructural or elemental composition and can be applied to studies of a large variety of samples. The work with large samples involves, beside the development of large irradiation devices with well know neutron field characteristics, the knowledge of perturbing phenomena and adequate evaluation of correction factors like: neutron self shielding, extended source correction, gamma ray auto absorption. The objective of the works presented in this paper is to validate an appropriate methodology for gamma ray auto absorption correction evaluation for large inhomogeneous samples. For this purpose a benchmark experiment has been defined - a simple gamma ray transmission experiment, easy to be reproduced. The gamma ray attenuation in pottery samples has been measured and computed using MCNP5 code. The results show a good agreement between the computed and measured values, proving that the proposed methodology is able to evaluate the correction factors. (authors)

  20. PENERAPAN CRITICAL REVIEW ARTIKEL PEMBELAJARAN IPA UNTUK MENINGKATKAN KEMAMPUAN MAHASISWA DALAM MENYUSUN PROPOSAL SKRIPSI

    Directory of Open Access Journals (Sweden)

    p parmin

    2016-02-01

    Full Text Available The aims of this research is to improve students’ ability in develop- ing a proposal thesis by applying critical review of scientific articles come from journals. The research is designed by class action research. The results showed 63% of students thesis proposals on Research Methodology course scored above 80. Based on the results obtained it can be concluded that the application has been critical review or critical study of scientific articles can enhance students’ ability in preparing research proposals.

  1. Methodology for attainment of density and effective atomic number through dual energy technique using microtomographic images

    International Nuclear Information System (INIS)

    Alves, H.; Lima, I.; Lopes, R.T.

    2014-01-01

    Dual energy technique for computerized microtomography shows itself as a promising method for identification of mineralogy on geological samples of heterogeneous composition. It can also assist with differentiating very similar objects regarding the attenuation coefficient, which are usually not separable during image processing and analysis of microtomographic data. Therefore, the development of a feasible and applicable methodology of dual energy in the analysis of microtomographic images was sought. - Highlights: • Dual energy technique is promising for identification of distribution of minerals. • A feasible methodology of dual energy in analysis of tomographic images was sought. • The dual energy technique is efficient for density and atomic number identification. • Simulation showed that the proposed methodology agrees with theoretical data. • Nondestructive characterization of distribution of density and chemical composition

  2. A methodology to generate statistically dependent wind speed scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Morales, J.M.; Conejo, A.J. [Department of Electrical Engineering, Univ. Castilla - La Mancha, Campus Universitario s/n, 13071 Ciudad Real (Spain); Minguez, R. [Environmental Hydraulics Institute ' ' IH Cantabria' ' , Univ. Cantabria, Avenida de los Castros s/n, 39005 Santander (Spain)

    2010-03-15

    Wind power - a renewable energy source increasingly attractive from an economic viewpoint - constitutes an electricity production alternative of growing relevance in current electric energy systems. However, wind power is an intermittent source that cannot be dispatched at the will of the producer. Modeling wind power production requires characterizing wind speed at the sites where the wind farms are located. The wind speed at a particular location can be described through a stochastic process that is spatially correlated with the stochastic processes describing wind speeds at other locations. This paper provides a methodology to characterize the stochastic processes pertaining to wind speed at different geographical locations via scenarios. Each one of these scenarios embodies time dependencies and is spatially dependent of the scenarios describing other wind stochastic processes. The scenarios generated by the proposed methodology are intended to be used within stochastic programming decision models to make informed decisions pertaining to wind power production. The methodology proposed is accurate in reproducing wind speed historical series as well as computationally efficient. A comprehensive case study is used to illustrate the capabilities of the proposed methodology. Appropriate conclusions are finally drawn. (author)

  3. A methodology to generate statistically dependent wind speed scenarios

    International Nuclear Information System (INIS)

    Morales, J.M.; Minguez, R.; Conejo, A.J.

    2010-01-01

    Wind power - a renewable energy source increasingly attractive from an economic viewpoint - constitutes an electricity production alternative of growing relevance in current electric energy systems. However, wind power is an intermittent source that cannot be dispatched at the will of the producer. Modeling wind power production requires characterizing wind speed at the sites where the wind farms are located. The wind speed at a particular location can be described through a stochastic process that is spatially correlated with the stochastic processes describing wind speeds at other locations. This paper provides a methodology to characterize the stochastic processes pertaining to wind speed at different geographical locations via scenarios. Each one of these scenarios embodies time dependencies and is spatially dependent of the scenarios describing other wind stochastic processes. The scenarios generated by the proposed methodology are intended to be used within stochastic programming decision models to make informed decisions pertaining to wind power production. The methodology proposed is accurate in reproducing wind speed historical series as well as computationally efficient. A comprehensive case study is used to illustrate the capabilities of the proposed methodology. Appropriate conclusions are finally drawn.

  4. New methodology for fast prediction of wheel wear evolution

    Science.gov (United States)

    Apezetxea, I. S.; Perez, X.; Casanueva, C.; Alonso, A.

    2017-07-01

    In railway applications wear prediction in the wheel-rail interface is a fundamental matter in order to study problems such as wheel lifespan and the evolution of vehicle dynamic characteristic with time. However, one of the principal drawbacks of the existing methodologies for calculating the wear evolution is the computational cost. This paper proposes a new wear prediction methodology with a reduced computational cost. This methodology is based on two main steps: the first one is the substitution of the calculations over the whole network by the calculation of the contact conditions in certain characteristic point from whose result the wheel wear evolution can be inferred. The second one is the substitution of the dynamic calculation (time integration calculations) by the quasi-static calculation (the solution of the quasi-static situation of a vehicle at a certain point which is the same that neglecting the acceleration terms in the dynamic equations). These simplifications allow a significant reduction of computational cost to be obtained while maintaining an acceptable level of accuracy (error order of 5-10%). Several case studies are analysed along the paper with the objective of assessing the proposed methodology. The results obtained in the case studies allow concluding that the proposed methodology is valid for an arbitrary vehicle running through an arbitrary track layout.

  5. [Methodological and operational notes for the assessment and management of the risk of work-related stress].

    Science.gov (United States)

    De Ambrogi, Francesco; Ratti, Elisabetta Ceppi

    2011-01-01

    Today the Italian national debate over the Work-Related Stress Risk Assessment methodology is rather heated. Several methodological proposals and guidelines have been published in recent months, not least those by the "Commissione Consultiva". But despite this wide range of proposals, it appears that there is still a lack of attention to some of the basic methodological issues that must be taken into account in order to correctly implement the above-mentioned guidelines. The aim of this paper is to outline these methodological issues. In order to achieve this, the most authoritative methodological proposals and guidelines have been reviewed. The study focuses in particular on the methodological issues that could lead to important biases if not considered properly. The study leads to some considerations about the methodological validity of a Work-Related Stress Risk Assessment based exclusively on the literal interpretation of the considered proposals. Furthermore, the study provides some hints and working hypotheses on how to overcome these methodological limits. This study should be considered as a starting point for further investigations and debate on the Work-Related Stress Risk Assessment methodology on a national level.

  6. The policy trail methodology

    DEFF Research Database (Denmark)

    Holford, John; Larson, Anne; Melo, Susana

    of ‘policy trail’, arguing that it can overcome ‘methodological nationalism’ and link structure and agency in research on the ‘European educational space’. The ‘trail’ metaphor, she suggests, captures the intentionality and the erratic character of policy. The trail connects sites and brings about change......, but – although policy may be intended to be linear, with specific outcomes – policy often has to bend, and sometimes meets insurmountable obstacles. This symposium outlines and develops the methodology, but also reports on research undertaken within a major FP7 project (LLLIght’in’Europe, 2012-15) which made use......In recent years, the “policy trail” has been proposed as a methodology appropriate to the shifting and fluid governance of lifelong learning in the late modern world (Holford et al. 2013, Holford et al. 2013, Cort 2014). The contemporary environment is marked by multi-level governance (global...

  7. Methodology to design a municipal solid waste generation and composition map: A case study

    International Nuclear Information System (INIS)

    Gallardo, A.; Carlos, M.; Peris, M.; Colomer, F.J.

    2014-01-01

    Highlights: • To draw a waste generation and composition map of a town a lot of factors must be taken into account. • The methodology proposed offers two different depending on the available data combined with geographical information systems. • The methodology has been applied to a Spanish city with success. • The methodology will be a useful tool to organize the municipal solid waste management. - Abstract: The municipal solid waste (MSW) management is an important task that local governments as well as private companies must take into account to protect human health, the environment and to preserve natural resources. To design an adequate MSW management plan the first step consist in defining the waste generation and composition patterns of the town. As these patterns depend on several socio-economic factors it is advisable to organize them previously. Moreover, the waste generation and composition patterns may vary around the town and over the time. Generally, the data are not homogeneous around the city as the number of inhabitants is not constant nor it is the economic activity. Therefore, if all the information is showed in thematic maps, the final waste management decisions can be made more efficiently. The main aim of this paper is to present a structured methodology that allows local authorities or private companies who deal with MSW to design its own MSW management plan depending on the available data. According to these data, this paper proposes two ways of action: a direct way when detailed data are available and an indirect way when there is a lack of data and it is necessary to take into account bibliographic data. In any case, the amount of information needed is considerable. This paper combines the planning methodology with the Geographic Information Systems to present the final results in thematic maps that make easier to interpret them. The proposed methodology is a previous useful tool to organize the MSW collection routes including the

  8. Proposals for implementation of methodological aspects in the use of 18F-FDG in the Positron Emission Tomography

    International Nuclear Information System (INIS)

    Oliveira, Cássio Miri

    2013-01-01

    This work covered three objectives: to evaluate and implement methods for in vivo internal occupational monitoring of individuals involved during the 18 F-FDG process production; to suggest a national Diagnostic Reference Level (DRL) for 18 F-FDGPET oncologic procedures; and to obtain the 'Recovery Coefficients' (RCs) factors used to correct the radiopharmaceutical uptake in region of interest for a better quantification and evaluation of images. The methodology of internal monitoring was implemented in the radiopharmaceuticals production centers of Nuclear Technology Development Center (CDTN) in Belo Horizonte - MG and the Nuclear Science Regional Center, North-East (CRCN-NE) in Recife, PE, Brazil. The results demonstrated that the developed methodology was efficient to evaluate 18 F-FDG incorporations in both centers; additionally, the methodology showed that there was possibility of 18 F incorporation in the form of 18 F-FDG during non-routine actions performed in the radiopharmaceutical production process. DRLs were suggested based on a questionnaire that was used for the survey of 18 F-FDG administered activity in 72 Brazilian clinics currently licensed by the National Nuclear Energy Commission (CNEN). The results reported by 41 (57%) of the 18 F-FDG-PET clinics showed variations up to 100% in the administered activities among clinics for the same procedure. The calculated DRL from the third quartile was 5.54 MBq/kg or 387.7 MBq (for a 70 kg standard patient). For image analysis, two phantoms were used for obtaining the RCs, the NEMA/IEC Body Phantom, which has spherical capture areas and the modified Jaszczak, which has cylindrical capitation capture areas. Both phantoms were tested for different lesion:BG activity ratios, in the amount of 4:1 and 10:1; for different acquisition time. RCs obtained according to NEMA and IEC standards were applied to the SUVmax and SUVmed semi quantification tools. Values of SUVmed corrected by RCs presented

  9. BEEHIVE: Sustainable Methodology for Fashion Design

    OpenAIRE

    Morais, C.; Carvalho, C.; Broega, A. C.

    2014-01-01

    The proposal methodology tends to close the “product fashion cycle”, defending the existence of a good waste management policy, so that the clothing are thrown away can be reused or recycled to come back again as material to produce yarn, fabric or knit. Subsequently these materials should be include in the production of sustainable apparel, whose design methodologies should be concerned in providing more durable garments and being possible to transform according to the occasion and the user....

  10. A methodology for calculating photovoltaic field output and effect of solar tracking strategy

    International Nuclear Information System (INIS)

    Hu, Yeguang; Yao, Yingxue

    2016-01-01

    Highlights: • A new methodology for calculating PV field output is proposed. • The reduction of diffuse radiation and albedo due to shading is considered. • The shadow behavior is accurately analyzed at a cell level. • Several simplified measures are taken to reduce the calculation work. • The field outputs with different solar tracking strategies are compared. - Abstract: This paper proposes an effective methodology for calculating the photovoltaic field output. A combination of two methods is first presented for optical performance calculation: point projection method for direction radiation, and Monte Carlo ray-tracing method for both diffuse radiation and albedo radiation. Based on the optical calculation, an accurate output of the photovoltaic field can be obtained through a cell-level simulation of PV system. Several simplified measures are taken to reduce the large amount of calculation work. The proposed methodology has been validated for accurate and fast calculation of field output. With the help of the developed code, this paper deals with the performance comparison between four typical tracking strategies. Through the comparative analysis, the field output is proved to be related to the tracking strategy. For a regular photovoltaic field, the equatorial and elevation-rolling tracking show the superior performance in annual field output to the azimuth-elevation and rolling-elevation tracking. A reasonable explanation for this difference has been presented in this paper.

  11. A theoretical and methodological proposal for the descriptive assessment of therapeutic interactions.

    Science.gov (United States)

    Froján-Parga, María Xesús; Ruiz-Sancho, Elena M; Calero-Elvira, Ana

    2016-01-01

    The goal of this study is to show the development of a strategy for a descriptive assessment of the therapeutic interaction. In this study, we develop an observational methodology to analyze the dialogues that took place during 92 sessions conducted in a psychological center in Madrid, Spain, in which 19 adults were treated for various psychological problems by 9 behavioral therapists. A system was developed to codify vocal behavior of both the therapists and the clients; the software The Observer XT was used for recording. Therapeutic interactions were analyzed using sequential analysis. There are three main sequences that synthesize the therapist-client interaction: first, an utterance by the client preceded by a therapist's verbalization, specifically a question (discriminative morphology) and followed by an expression of approval (reinforcement morphology); second, verbalizations of failure or discomfort uttered by the client, followed most often by verbalizations of disapproval (punishing morphology) uttered by the therapist; and third, verbalizations uttered by the client that are discriminated by the therapist after an in-depth explanation and followed by different therapist's utterances (expressions of approval, technical information, etc.). Depending on how the client responds the results in this study present a starting point for the study of the functional sequences that form the basis of therapeutic change.

  12. Guidelines for reporting evaluations based on observational methodology.

    Science.gov (United States)

    Portell, Mariona; Anguera, M Teresa; Chacón-Moscoso, Salvador; Sanduvete-Chaves, Susana

    2015-01-01

    Observational methodology is one of the most suitable research designs for evaluating fidelity of implementation, especially in complex interventions. However, the conduct and reporting of observational studies is hampered by the absence of specific guidelines, such as those that exist for other evaluation designs. This lack of specific guidance poses a threat to the quality and transparency of these studies and also constitutes a considerable publication hurdle. The aim of this study thus was to draw up a set of proposed guidelines for reporting evaluations based on observational methodology. The guidelines were developed by triangulating three sources of information: observational studies performed in different fields by experts in observational methodology, reporting guidelines for general studies and studies with similar designs to observational studies, and proposals from experts in observational methodology at scientific meetings. We produced a list of guidelines grouped into three domains: intervention and expected outcomes, methods, and results. The result is a useful, carefully crafted set of simple guidelines for conducting and reporting observational studies in the field of program evaluation.

  13. Development of the methodology on priority of element-specific biosphere parameters for geological disposal applicable to any proposed repository site

    International Nuclear Information System (INIS)

    Kato, Tomoko; Ohi, Takao; Suzuki, Yuji

    2009-01-01

    It is difficult to acquire all of biosphere parameters for geological disposal at the repository site because several hundreds of the parameters have to be dealt with in one calculation case of the biosphere assessment. Before site-specific activities, it is important to develop the data acquisition methodology of biosphere parameters applicable to any proposed repository site. The methodology for identification of the priority of the parameters was developed for the effective data acquisition of biosphere parameters at the site. First of all, flow diagram was constructed to evaluate the availability of the existing generic biosphere dataset. It was found to be effective for the data acquisition at the site to focus on the element-specific parameters with the existing dataset. Secondly, the priority of the data acquisition was identified for element-specific parameters at the site, with considering the variation of dose rate by combining the significant element-specific parameters. The availability of the existing generic biosphere dataset and the priority on data acquisition were identified for the element-specific parameters of key radionuclides in the safety assessment of geological disposal that should be acquired at the site. This priority list would be useful for effective data acquisition at the site. (author)

  14. A methodology to measure the degre of managerial innovation

    OpenAIRE

    Ayhan, Mustafa Batuhan; Oztemel, Ercan

    2014-01-01

    Purpose: The main objective of this study is to introduce the concept of managerial innovation and to propose a quantitative methodology to measure the degree of managerial innovation capability by analyzing the evolution of the techniques used for management functions.Design/methodology/approach: The methodology mainly focuses on the different techniques used for each management functions namely; Planning, Organizing, Leading, Controlling and Coordinating. These functions are studied and the...

  15. Environmental and sanitary evaluation of electro-nuclear sites: methodological research and application to prospective scenarios

    International Nuclear Information System (INIS)

    2004-12-01

    In the framework of the radioactive wastes disposal of the law of 1991, an exchange forum constituted by ANDRA, CEA, COGEMA, EdF, Framatome-ANP and IRSN implemented an environmental and sanitary evaluation of the different methods of radioactive wastes management. This report presents the six studies scenarios, the proposed methodology, the application to the six scenarios and the analysis of the results which showed the efficiency of the different recycling options towards the electronuclear cycle impacts limitation, and a technical conclusion illustrated by improvement possibilities of the methodology. (A.L.B.)

  16. A novel fusion methodology to bridge GPS outages for land vehicle positioning

    International Nuclear Information System (INIS)

    Chen, Wei; Li, Xu; Song, Xiang; Xu, Qimin; Li, Bin; Song, Xianghui

    2015-01-01

    Many intelligent transportation system applications require accurate, reliable, and continuous vehicle position information whether in open-sky environments or in Global Positioning System (GPS) denied environments. However, there remains a challenging task for land vehicles to achieve such positioning performance using low-cost sensors, especially microelectromechanical system (MEMS) sensors. In this paper, a novel and cost-effective fusion methodology to bridge GPS outages is proposed and applied in the Inertial Navigation System (INS)/GPS/ compass integrated positioning system. In the implementation of the proposed methodology, a key data preprocessing algorithm is first developed to eliminate the noise in inertial sensors in order to provide more accurate information for subsequent modeling. Then, a novel hybrid strategy incorporating the designed autoregressive model (AR model)-based forward estimator (ARFE) with Kalman filter (KF) is presented to predict the INS position errors during GPS outages. To verify the feasibility and effectiveness of the proposed methodology, real road tests with various scenarios were performed. The proposed methodology illustrates significant improvement in positioning accuracy during GPS outages. (paper)

  17. Proposed Reliability/Cost Model

    Science.gov (United States)

    Delionback, L. M.

    1982-01-01

    New technique estimates cost of improvement in reliability for complex system. Model format/approach is dependent upon use of subsystem cost-estimating relationships (CER's) in devising cost-effective policy. Proposed methodology should have application in broad range of engineering management decisions.

  18. Cyclic Concatenated Genetic Encoder: A mathematical proposal for biological inferences.

    Science.gov (United States)

    Duarte-González, M E; Echeverri, O Y; Guevara, J M; Palazzo, R

    2018-01-01

    The organization of the genetic information and its ability to be conserved and translated to proteins with low error rates have been the subject of study by scientists from different disciplines. Recently, it has been proposed that living organisms display an intra-cellular transmission system of genetic information, similar to a model of digital communication system, in which there is the ability to detect and correct errors. In this work, the concept of Concatenated Genetic Encoder is introduced and applied to the analysis of protein sequences as a tool for exploring evolutionary relationships. For such purposes Error Correcting Codes (ECCs) are used to represent proteins. A methodology for representing or identifying proteins by use of BCH codes over ℤ 20 and F 4 ×ℤ 5 is proposed and cytochrome b6-f complex subunit 6-OS sequences, corresponding to different plants species, are analyzed according to the proposed methodology and results are contrasted to phylogenetic and taxonomic analyses. Through the analyses, it was observed that using BCH codes only some sequences are identified, all of which differ in one amino acid from the original sequence. In addition, mathematical relationships among identified sequences are established by considering minimal polynomials, where such sequences showed a close relationship as revealed in the phylogenetic reconstruction. Results, here shown, point out that communication theory may provide biology of interesting and useful tools to identify biological relationships among proteins, however the proposed methodology needs to be improved and rigorously tested in order to become into an applicable tool for biological analysis. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. 76 FR 23603 - New Proposed Collection; Comment Request; Environmental Science Formative Research Methodology...

    Science.gov (United States)

    2011-04-27

    ...; Comment Request; Environmental Science Formative Research Methodology Studies for the National Children's... an OMB generic clearance to conduct formative research featuring biospecimen and physical measures... health and disease. Findings from the Study will be made available as the research progresses, making...

  20. Nuclear power plant simulation facility evaluation methodology

    International Nuclear Information System (INIS)

    Haas, P.M.; Carter, R.J.; Laughery, K.R. Jr.

    1985-01-01

    A methodology for evaluation of nuclear power plant simulation facilities with regard to their acceptability for use in the US Nuclear Regulatory Commission (NRC) operator licensing exam is described. The evaluation is based primarily on simulator fidelity, but incorporates some aspects of direct operator/trainee performance measurement. The panel presentation and paper discuss data requirements, data collection, data analysis and criteria for conclusions regarding the fidelity evaluation, and summarize the proposed use of direct performance measurment. While field testing and refinement of the methodology are recommended, this initial effort provides a firm basis for NRC to fully develop the necessary methodology

  1. How to write a research proposal?

    OpenAIRE

    K Sudheesh; Devika Rani Duggappa; S S Nethra

    2016-01-01

    Writing the proposal of a research work in the present era is a challenging task due to the constantly evolving trends in the qualitative research design and the need to incorporate medical advances into the methodology. The proposal is a detailed plan or ?blueprint? for the intended study, and once it is completed, the research project should flow smoothly. Even today, many of the proposals at post-graduate evaluation committees and application proposals for funding are substandard. A search...

  2. A Methodological Approach to Assess the Impact of Smarting Action on Electricity Transmission and Distribution Networks Related to Europe 2020 Targets

    Directory of Open Access Journals (Sweden)

    Andrea Bonfiglio

    2017-01-01

    Full Text Available The achievement of the so-called 2020 targets requested by the European Union (EU has determined a significant growth of proposals of solutions and of technical projects aiming at reducing the CO2 emissions and increasing the energy efficiency, as well as the penetration of Renewable Energy Sources (RES in the electric network. As many of them ask for funding from the EU itself, there is the necessity to define a methodology to rank them and decide which projects should be sponsored to obtain the maximum effect on the EU 2020 targets. The present paper aims at (i defining a set of Key Performance Indicators (KPIs to compare different proposals, (ii proposing an analytical methodology to evaluate the defined KPIs and (iii evaluating the maximum impact that the considered action is capable of producing. The proposed methodology is applied to a set of possible interventions performed on a benchmark transmission network test case, in order to show that the defined indicators can be either calculated or measured and that they are useful to rank different “smarting actions”.

  3. Proposed methodology for estimating the impact of highway improvements on urban air pollution.

    Science.gov (United States)

    1971-01-01

    The aim of this methodology is to indicate the expected change in ambient air quality in the vicinity of a highway improvement and in the total background level of urban air pollution resulting from the highway improvement. Both the jurisdiction in w...

  4. Challenges and Opportunities for Harmonizing Research Methodology

    DEFF Research Database (Denmark)

    van Hees, V. T.; Thaler-Kall, K.; Wolf, K. H.

    2016-01-01

    Objectives: Raw accelerometry is increasingly being used in physical activity research, but diversity in sensor design, attachment and signal processing challenges the comparability of research results. Therefore, efforts are needed to harmonize the methodology. In this article we reflect on how...... increased methodological harmonization may be achieved. Methods: The authors of this work convened for a two-day workshop (March 2014) themed on methodological harmonization of raw accelerometry. The discussions at the workshop were used as a basis for this review. Results: Key stakeholders were identified...... as manufacturers, method developers, method users (application), publishers, and funders. To facilitate methodological harmonization in raw accelerometry the following action points were proposed: i) Manufacturers are encouraged to provide a detailed specification of their sensors, ii) Each fundamental step...

  5. GPS Technology and Human Psychological Research: A Methodological Proposal

    Directory of Open Access Journals (Sweden)

    Pedro S. A. Wolf

    2010-10-01

    Full Text Available Animal behaviorists have made extensive use of GPS technology since 1991. In contrast, psychological research has made little use of the technology, even though the technology is relatively inexpensive, familiar, and widespread. Hence, its potential for pure and applied psychological research remains untapped. We describe three methods psychologists could apply to individual differences research, clinical research, or spatial use research. In the context of individual differences research, GPS technology permits us to test hypotheses predicting specific relations among patterns of spatial use and individual differences variables. In a clinical context, GPS technology provides outcome measures that may relate to the outcome of interventions designed to treat psychological disorders that, for example, may leave a person homebound (e.g. Agoraphobia, PTSD, TBI. Finally, GPS technology provides natural measures of spatial use. We, for example, used GPS technology to quantify traffic flow and exhibit use at the Arizona Sonora Desert Museum. Interested parties could easily extend this methodology some aspects of urban planning or business usage.DOI: 10.2458/azu_jmmss.v1i1.74

  6. Methodological proposal for environmental impact evaluation since different specific methods

    International Nuclear Information System (INIS)

    Leon Pelaez, Juan Diego; Lopera Arango Gabriel Jaime

    1999-01-01

    Some conceptual and practical elements related to environmental impact evaluation are described and related to the preparation of technical reports (environmental impact studies and environmental management plans) to be presented to environmental authorities for obtaining the environmental permits for development projects. In the first part of the document a summary of the main aspects of normative type is made that support the studies of environmental impact in Colombia. We propose a diagram for boarding and elaboration of the evaluation of environmental impact, which begins with the description of the project and of the environmental conditions in the area of the same. Passing then to identify the impacts through a method matricial and continuing with the quantitative evaluation of the same. For which we propose the use of the method developed by Arboleda (1994). Also we propose to qualify the activities of the project and the components of the environment in their relative importance, by means of a method here denominated agglomerate evaluation. Which allows finding those activities more impacting and the mostly impacted components. Lastly it is presented some models for the elaboration and presentation of the environmental management plans. The pursuit programs and those of environmental supervision

  7. Propuesta metodológica para el análisis morfo-sedimentológico en cuencas altamente urbanizadas: Caso de estudio quebrada Doña María (Colombia A methodological proposal to morph-sedimentologic analysis at urban basins: Case study: Doña Maria's basin

    Directory of Open Access Journals (Sweden)

    Juan Esteban González

    2010-01-01

    Full Text Available En este artículo se presenta una propuesta metodológica para hacer el análisis de morfología fluvial y transporte de sedimentos para cuencas altamente intervenidas por la acción humana. En dicha metodología se proponen diferentes actividades las cuales permitirán hacer un análisis detallado de la morfología fluvial y los sedimentos en una cuenca. Entre las etapas que se proponen para implementar esta metodología se tienen: análisis en planta de la cuenca, análisis de los perfiles altimétricos de las principales corrientes, levantamiento de información en campo (aforos líquidos, sólidos y observaciones generales de la morfología de la cuenca y estimación de la carga y capacidad de carga de sedimentos en la quebrada principal. Una aplicación a la cuenca de la quebrada Doña María (en el Área Metropolitana del Valle de Aburrá, Colombia es presentada.This paper shows a methodological proposal to carry out river morphology analysis and sediment transport for urban basins highly intervened by human actions. In this methodology, different activities that will allow doing a detailed analysis for the river morphology and sediment transport in the basin are proposed. Among the steps proposed to implement this methodology, there are: analysis in plant of little basin, altitude profiles analysis of the main sub-basins, field measures (measures of liquid and solid discharge and general observations of the basin morphology, and estimations of sediments load and bed load capacity in the stream. An application to basin of Doña María is showed.

  8. Optimized planning methodologies of ASON implementation

    Science.gov (United States)

    Zhou, Michael M.; Tamil, Lakshman S.

    2005-02-01

    Advanced network planning concerns effective network-resource allocation for dynamic and open business environment. Planning methodologies of ASON implementation based on qualitative analysis and mathematical modeling are presented in this paper. The methodology includes method of rationalizing technology and architecture, building network and nodal models, and developing dynamic programming for multi-period deployment. The multi-layered nodal architecture proposed here can accommodate various nodal configurations for a multi-plane optical network and the network modeling presented here computes the required network elements for optimizing resource allocation.

  9. Methodology for Monitoring Sustainable Development of Isolated Microgrids in Rural Communities

    Directory of Open Access Journals (Sweden)

    Claudia Rahmann

    2016-11-01

    Full Text Available Microgrids are a rapidly evolving and increasingly common form of local power generation used to serve the needs of both rural and urban communities. In this paper, we present a methodology to evaluate the evolution of the sustainability of stand-alone microgrids projects. The proposed methodology considers a composite sustainability index (CSI that includes both positive and negative impacts of the operation of the microgrid in a given community. The CSI is constructed along environmental, social, economic and technical dimensions of the microgrid. The sub-indexes of each dimension are aggregated into the CSI via a set of adaptive weighting factors, which indicate the relative importance of the corresponding dimension in the sustainability goals. The proposed methodology aims to be a support instrument for policy makers especially when defining sound corrective measures to guarantee the sustainability of small, isolated microgrid projects. To validate the performance of the proposed methodology, a microgrid installed in the northern part of Chile (Huatacondo has been used as a benchmarking project.

  10. 76 FR 50993 - Agency Information Collection Activities: Proposed Collection; Comment Request-Generic Clearance...

    Science.gov (United States)

    2011-08-17

    ... interviews, respondent debriefing, pilot surveys) to quickly test and implement new questions for research...: Proposed Collection; Comment Request--Generic Clearance to Conduct Methodological Testing, Surveys, Focus... proposed information collection. This information collection will conduct research by methodological...

  11. Proposal for evaluation methodology on impact resistant performance and construction method of tornado missile protection net structure

    International Nuclear Information System (INIS)

    Namba, Kosuke; Shirai, Koji

    2014-01-01

    In nuclear power plants, the necessity of the Tornado Missile Protection Structure is becoming a technical key issue. Utilization of the net structure seems to be one of the realistic counter measures from the point of the view of the mitigation wind and seismic loads. However, the methodology for the selection of the net suitable materials, the energy absorption design method and the construction method are not sufficiently established. In this report, three materials (high-strength metal mesh, super strong polyethylene fiber net and steel grating) were selected for the candidate material and the material screening tests, the energy absorption tests by free drop test using the heavy weight and the impact tests with the small diameter missile. As a result, high-strength metal mesh was selected as a suitable material for tornado missile protection net structure. Moreover, the construction method to obtain the good energy absorption performance of the material and the practical design method to estimate the energy absorption of the high-strength metal mesh under tornado missile impact load were proposed. (author)

  12. A proposed methodology for the assessment of arsenic, nickel, cadmium and lead levels in ambient air

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Germán, E-mail: santosg@unican.es; Fernández-Olmo, Ignacio

    2016-06-01

    Air quality assessment, required by the European Union (EU) Air Quality Directive, Directive 2008/50/EC, is part of the functions attributed to Environmental Management authorities. Based on the cost and time consumption associated with the experimental works required for the air quality assessment in relation to the EU-regulated metal and metalloids, other methods such as modelling or objective estimation arise as competitive alternatives when, in accordance with the Air Quality Directive, the levels of pollutants permit their use at a specific location. This work investigates the possibility of using statistical models based on Partial Least Squares Regression (PLSR) and Artificial Neural Networks (ANNs) to estimate the levels of arsenic (As), cadmium (Cd), nickel (Ni) and lead (Pb) in ambient air and their application for policy purposes. A methodology comprising the main steps that should be taken into consideration to prepare the input database, develop the model and evaluate their performance is proposed and applied to a case of study in Santander (Spain). It was observed that even though these approaches present some difficulties in estimating the individual sample concentrations, having an equivalent performance they can be considered valid for the estimation of the mean values – those to be compared with the limit/target values – fulfilling the uncertainty requirements in the context of the Air Quality Directive. Additionally, the influence of the consideration of input variables related to atmospheric stability on the performance of the studied statistical models has been determined. Although the consideration of these variables as additional inputs had no effect on As and Cd models, they did yield an improvement for Pb and Ni, especially with regard to ANN models. - Highlights: • EU encourages modelling techniques over measurements for air quality assessment. • A methodology for minor pollutants assessment by statistical modelling is presented.

  13. A proposed methodology for the assessment of arsenic, nickel, cadmium and lead levels in ambient air

    International Nuclear Information System (INIS)

    Santos, Germán; Fernández-Olmo, Ignacio

    2016-01-01

    Air quality assessment, required by the European Union (EU) Air Quality Directive, Directive 2008/50/EC, is part of the functions attributed to Environmental Management authorities. Based on the cost and time consumption associated with the experimental works required for the air quality assessment in relation to the EU-regulated metal and metalloids, other methods such as modelling or objective estimation arise as competitive alternatives when, in accordance with the Air Quality Directive, the levels of pollutants permit their use at a specific location. This work investigates the possibility of using statistical models based on Partial Least Squares Regression (PLSR) and Artificial Neural Networks (ANNs) to estimate the levels of arsenic (As), cadmium (Cd), nickel (Ni) and lead (Pb) in ambient air and their application for policy purposes. A methodology comprising the main steps that should be taken into consideration to prepare the input database, develop the model and evaluate their performance is proposed and applied to a case of study in Santander (Spain). It was observed that even though these approaches present some difficulties in estimating the individual sample concentrations, having an equivalent performance they can be considered valid for the estimation of the mean values – those to be compared with the limit/target values – fulfilling the uncertainty requirements in the context of the Air Quality Directive. Additionally, the influence of the consideration of input variables related to atmospheric stability on the performance of the studied statistical models has been determined. Although the consideration of these variables as additional inputs had no effect on As and Cd models, they did yield an improvement for Pb and Ni, especially with regard to ANN models. - Highlights: • EU encourages modelling techniques over measurements for air quality assessment. • A methodology for minor pollutants assessment by statistical modelling is presented.

  14. C-Based Design Methodology and Topological Change for an Indian Agricultural Tractor Component

    Science.gov (United States)

    Matta, Anil Kumar; Raju, D. Ranga; Suman, K. N. S.; Kranthi, A. S.

    2018-06-01

    The failure of tractor components and their replacement has now become very common in India because of re-cycling, re-sale, and duplication. To over come the problem of failure we propose a design methodology for topological change co-simulating with software's. In the proposed Design methodology, the designer checks Paxial, Pcr, Pfailue, τ by hand calculations, from which refined topological changes of R.S.Arm are formed. We explained several techniques employed in the component for reduction, removal of rib material to change center of gravity and centroid point by using system C for mixed level simulation and faster topological changes. The design process in system C can be compiled and executed with software, TURBO C7. The modified component is developed in proE and analyzed in ANSYS. The topologically changed component with slot 120 × 4.75 × 32.5 mm at the center showed greater effectiveness than the original component.

  15. C-Based Design Methodology and Topological Change for an Indian Agricultural Tractor Component

    Science.gov (United States)

    Matta, Anil Kumar; Raju, D. Ranga; Suman, K. N. S.; Kranthi, A. S.

    2018-02-01

    The failure of tractor components and their replacement has now become very common in India because of re-cycling, re-sale, and duplication. To over come the problem of failure we propose a design methodology for topological change co-simulating with software's. In the proposed Design methodology, the designer checks Paxial, Pcr, Pfailue, τ by hand calculations, from which refined topological changes of R.S.Arm are formed. We explained several techniques employed in the component for reduction, removal of rib material to change center of gravity and centroid point by using system C for mixed level simulation and faster topological changes. The design process in system C can be compiled and executed with software, TURBO C7. The modified component is developed in proE and analyzed in ANSYS. The topologically changed component with slot 120 × 4.75 × 32.5 mm at the center showed greater effectiveness than the original component.

  16. Fully Stochastic Distributed Methodology for Multivariate Flood Frequency Analysis

    Directory of Open Access Journals (Sweden)

    Isabel Flores-Montoya

    2016-05-01

    Full Text Available An adequate estimation of the extreme behavior of basin response is essential both for designing river structures and for evaluating their risk. The aim of this paper is to develop a new methodology to generate extreme hydrograph series of thousands of years using an event-based model. To this end, a spatial-temporal synthetic rainfall generator (RainSimV3 is combined with a distributed physically-based rainfall–runoff event-based model (RIBS. The use of an event-based model allows simulating longer hydrograph series with less computational and data requirements but need to characterize the initial basis state, which depends on the initial basin moisture distribution. To overcome this problem, this paper proposed a probabilistic calibration–simulation approach, which considers the initial state and the model parameters as random variables characterized by a probability distribution though a Monte Carlo simulation. This approach is compared with two other approaches, the deterministic and the semi-deterministic approaches. Both approaches use a unique initial state. The deterministic approach also uses a unique value of the model parameters while the semi-deterministic approach obtains these values from its probability distribution through a Monte Carlo simulation, considering the basin variability. This methodology has been applied to the Corbès and Générargues basins, in the Southeast of France. The results show that the probabilistic approach offers the best fit. That means that the proposed methodology can be successfully used to characterize the extreme behavior of the basin considering the basin variability and overcoming the basin initial state problem.

  17. Demonstration of an infiltration evaluation methodology

    International Nuclear Information System (INIS)

    Smyth, J.D.; Gee, G.W.; Kincaid, C.T.; Nichols, W.M.; Bresler, E.

    1990-07-01

    An Infiltration Evaluation Methodology (IEM) was developed for the US Nuclear Regulatory Commission (NRC) by Pacific Northwest Laboratory (PNL) to provide a consistent, well formulated approach for evaluating drainage through engineered covers at low-level radioactive waste (LLW) sites. The methodology is designed to help evaluate the ability of proposed waste site covers to minimize drainage for LLW site license applications and for sites associated with the Uranium Mill Tailings Remedial Action (UMTRA) program. The objective of this methodology is to estimate the drainage through an engineered burial site cover system. The drainage estimate can be used as an input to a broader performance assessment methodology currently under development by the NRC. The methodology is designed to simulate, at the field scale, significant factors and hydrologic conditions which determine or influence estimates of infiltration, long-term moisture content profiles, and drainage from engineered covers and barriers. The IEM developed under this study acknowledges the uncertainty inherent in soil properties and quantifies the influence of such uncertainty on the estimates of drainage in engineered cover systems at waste disposal sites. 6 refs., 1 fig

  18. PRELIMINARY METHODOLOGICAL PROPOSAL FOR ESTIMATING ENVIRONMENTAL FLOWS IN PROJECTS APPROVED BY THE MINISTRY OF ENVIRONMENT AND SUSTAINABLE DEVELOPMENT (MADS, COLOMBIA

    Directory of Open Access Journals (Sweden)

    Gabriel A. Pinilla Agudelo

    2014-01-01

    Full Text Available ABSTRACT A methodological proposal for estimating environmental flows in large projects approved by Agencia Nacional de Licencias Ambientales (ANLA in Colombian rivers was developed. The project is the result of an agreement between the MADS and the Universidad Nacional de Colombia, Bogotá (UNC. The proposed method begins with an evaluation of hydrological criteria,continues with a hydraulic and water quality validation, and follows with the determination of habitat integrity. This is an iterative process that compares conditions before and after the project construction and allows to obtain the magnitude of a monthly flow that, besides preserving the ecological functions of the river, guarantees the water uses downstream. Regarding to the biotic component, the proposal includes the establishment and monitoring of biotic integrity indices for four aquatic communities (periphyton, macroinvertebrates, riparian vegetation, and fish. The effects that flow reduction may produce in the medium and long term can be assessed by these indices. We present the results of applying the methodology to several projects licensed by the MADS. RESUMEN Se presenta una propuesta metodológica para estimar los caudales ambientales en grandes proyectos licenciados por la Agencia Nacional de Licencias Ambientales (ANLA de Colombia, resultado de un convenio interadministrativo suscrito entre el ahora Ministerio de Ambiente y Desarrollo Sostenible (MADS de Colombia y la Universidad Nacional de Colombia, Bogotá (UNC. El método propuesto parte de garantizar criterios hidrológicos, continúa con una validación hidráulica y de calidad del agua, sigue con la determinación de la integridad del hábitat, en un proceso iterativo que requiere evaluación para las condiciones antes y después de la construcción del proyecto y que permite establecer un caudal que, además de conservar las funciones ecológicas del río, garantiza los usos del recurso aguas abajo. Espec

  19. Simplified methodology for control cell constant calculations of the reactor cores for the space kinetics

    International Nuclear Information System (INIS)

    Santos, Rubens Souza dos; Martinez, Aquilino Senra; Alvim, Antonio Carlos Marques

    2002-01-01

    In this work is presented a methodology which focuses the distribution of neutron absorber rods in nuclear reactor power plants, for utilizing in space kinetic calculations, principally in the cluster ejection transients of control rods. A numerical model for macroscopic constant calculations based on the knowledge of the neutron flux without the control rods is proposed, as alternative to the analytical models, based on the hypothesis of the null current on the cell super boundaries. The proposed model in this work has itself showed adequate to deal with problems with strong space dependence, once that the model showed consistence in the global average built in the analytical model. (author)

  20. The Desired Image of the Future Economy of the Industrial Region: Development Trends and Evaluation Methodology

    Directory of Open Access Journals (Sweden)

    Olga Aleksandrovna Romanova

    2017-09-01

    Full Text Available In the article, the authors emphasize that industrial regions play an important role in the increasing of technological independence of Russia. We show that the decline in the share of processing industries in the gross regional product can not be treated as a negative de-industrialization of the economy. The article proves that the increase in the speed of changements, instability of socio-economic systems, the diverse risks predetermine the need to develop new methodological approaches to predictive research. The studies aimed at developing a technology for the design of the desired image of the future and the methodology for its evaluation are of high importance. For the initial stage of the research, the authors propose the methodological approach for assessing the desired image of the future of metallurgy as one of the most important industry of the region. We propose the term of «technological image of the regional metallurgy». We show that repositioning the image of the regional metallurgical complex is quite a long process. This have determined the need to define the stages of repositioning. The proposed methodology of the evaluation of desired future includes the methodological provisions to quantify the characteristics of goals achieved at the respective stages of the repositioning of the metallurgy. The methodological approach to the design of the desired image of the future implies the following stages: the identification of the priority areas of the technological development of regional metallurgy on the basis of bibliometric and patent analysis; the evaluation of dynamics of the development of the structure of metal products domestic consumption based on comparative analysis and relevant analytical methods as well as its forecasting; the design of the factor model, allowing to identify the parameters quantifying the technological image of the regional metallurgy based on the principal components method,; systematization of

  1. Quick Green Scan: A Methodology for Improving Green Performance in Terms of Manufacturing Processes

    Directory of Open Access Journals (Sweden)

    Aldona Kluczek

    2017-01-01

    Full Text Available The heating sector has begun implementing technologies and practices to tackle the environmental and social–economic problems caused by their production process. The purpose of this paper is to develop a methodology, “the Quick-Green-Scan”, that caters for the need of quick assessment decision-makers to improve green manufacturing performance in companies that produce heating devices. The study uses a structured approach that integrates Life Cycle Assessment-based indicators, framework and linguistic scales (fuzzy numbers to evaluate the extent of greening of the enterprise. The evaluation criteria and indicators are closely related to the current state of technology, which can be improved. The proposed methodology has been created to answer the question whether a company acts on the opportunity to be green and whether these actions are contributing towards greening, maintaining the status quo or moving away from a green outcome. Results show that applying the proposed improvements in processes helps move the facility towards being a green enterprise. Moreover, the methodology, being particularly quick and simple, is a practical tool for benchmarking, not only in the heating industry, but also proves useful in providing comparisons for facility performance in other manufacturing sectors.

  2. A proposed methodology for performing risk analysis of state radiation control programs

    International Nuclear Information System (INIS)

    Dornsife, W.P.

    1996-01-01

    This paper is comprised of viewgraphs from a conference presentation. Topics discussed include barriers to effective risk assessment and management, and real versus perceived risk for various radiation programs in the state of Pennsylvania. Calculation results for Pennsylvania are provided for low-level radioactive waste transportation risks, indoor radon risk, and cancer morbidity risk from x-rays. A methodology for prioritizing radiation regulatory programs based on risk is presented with calculations for various Pennsylvania programs

  3. Workshop of learning: a methodological proposal in the formation of the student of the High School

    Directory of Open Access Journals (Sweden)

    Tania Belizário Mastelari

    2017-12-01

    Full Text Available The main objective of the current school is to develop competences that allow the student to achieve personal and professional success, aiming to give space so that each individual can learn to use their knowledge to act efficiently. The present study aimed to investigate the skills and competences that converge to the enem structuring axes, to which the students developed when participating in a learning workshop. It was initially analyzed the convergences between the skills proposed by the workshop and those required by the official documents, such as the ENEM - National High School Examination and the CPN - National Curricular Parameters. For that, the workshop entitled "The Big Bang", developed with high school students, was analyzed. This workshop contemplates the perspective of the Natural Sciences and their Technologies, in the discipline of Biology, and for that, the convergences between the competences proposed by ENEM, PCN and the text of the workshop were raised. After this survey, we verified which of these competences were grouped in the structuring axes of the Enem: contextualization, interdisciplinarity and problem-situation. It can be observed that the methodology provides the possibility of developing skills and abilities, however, it is emphasized that the way the workshop is worked on the importance of understanding the nuances of the teaching-learning process, the clarity of skills concepts And skills, trans and interdisciplinarity, and especially how the Curriculum Guidelines are implicated in the whole educational context, must make sense of the criteria that teachers must use to achieve the pedagogical objectives, however, these indicators are often not clear In the teaching-learning process for educators, making it necessary to raise awareness so that the action of teaching is more effective.

  4. A Design Methodology for Computer Security Testing

    OpenAIRE

    Ramilli, Marco

    2013-01-01

    The field of "computer security" is often considered something in between Art and Science. This is partly due to the lack of widely agreed and standardized methodologies to evaluate the degree of the security of a system. This dissertation intends to contribute to this area by investigating the most common security testing strategies applied nowadays and by proposing an enhanced methodology that may be effectively applied to different threat scenarios with the same degree of effectiveness. ...

  5. Analyzing parameters optimisation in minimising warpage on side arm using response surface methodology (RSM)

    Science.gov (United States)

    Rayhana, N.; Fathullah, M.; Shayfull, Z.; Nasir, S. M.; Hazwan, M. H. M.

    2017-09-01

    This paper presents a systematic methodology to analyse the warpage of the side arm part using Autodesk Moldflow Insight software. Response Surface Methodology (RSM) was proposed to optimise the processing parameters that will result in optimal solutions by efficiently minimising the warpage of the side arm part. The variable parameters considered in this study was based on most significant parameters affecting warpage stated by previous researchers, that is melt temperature, mould temperature and packing pressure while adding packing time and cooling time as these is the commonly used parameters by researchers. The results show that warpage was improved by 10.15% and the most significant parameters affecting warpage are packing pressure.

  6. Combined strategic and tactical negotiation methodology for resolving complex brownfield conflicts

    Directory of Open Access Journals (Sweden)

    Keith W. Hipel

    2010-08-01

    Full Text Available An innovative negotiation methodology for strategic and tactical decision making is proposed for resolving conflicts in brownfield redevelopment. At the strategic level, the Graph Model for Conflict Resolution is systematically employed for determining a potential overall agreement, or set of resolutions, that is politically possible given the competing interests of the decision makers involved in a brownfield redevelopment project. At the tactical level, a possible strategic solution can be studied in depth using utility theory to determine trade-offs or concessions needed to reach a mutually acceptable detailed solution. Also, the proposed negotiation methodology can take into account the attitudes of negotiators and investigates the impact of the negotiators' attitudes on the outcome of negotiations at both levels of negotiation. The design of a negotiation decision support system is put forward to allow the proposed negotiation methodology to be conveniently applied to actual disputes.

  7. Application of the Integrated Safety Assessment methodology to safety margins. Dynamic Event Trees, Damage Domains and Risk Assessment

    International Nuclear Information System (INIS)

    Ibánez, L.; Hortal, J.; Queral, C.; Gómez-Magán, J.; Sánchez-Perea, M.; Fernández, I.; Meléndez, E.; Expósito, A.; Izquierdo, J.M.; Gil, J.; Marrao, H.; Villalba-Jabonero, E.

    2016-01-01

    The Integrated Safety Assessment (ISA) methodology, developed by the Consejo de Seguridad Nuclear, has been applied to an analysis of Zion NPP for sequences with Loss of the Component Cooling Water System (CCWS). The ISA methodology proposal starts from the unfolding of the Dynamic Event Tree (DET). Results from this first step allow assessing the sequence delineation of standard Probabilistic Safety Analysis results. For some sequences of interest of the outlined DET, ISA then identifies the Damage Domain (DD). This is the region of uncertain times and/or parameters where a safety limit is exceeded, which indicates the occurrence of certain damage situation. This paper illustrates application of this concept obtained simulating sequences with MAAP and with TRACE. From information of simulation results of sequence transients belonging to the DD and the time-density probability distributions of the manual actions and of occurrence of stochastic phenomena, ISA integrates the dynamic reliability equations proposed to obtain the sequence contribution to the global Damage Exceedance Frequency (DEF). Reported results show a slight increase in the DEF for sequences investigated following a power uprate from 100% to 110%. This demonstrates the potential use of the method to help in the assessment of design modifications. - Highlights: • This paper illustrates an application of the ISA methodology to safety margins. • Dynamic Event Trees are useful tool for verifying the standard PSA Event Trees. • The ISA methodology takes into account the uncertainties in human action times. • The ISA methodology shows the Damage Exceedance Frequency increase in power uprates.

  8. Design Methodology of a Dual-Halbach Array Linear Actuator with Thermal-Electromagnetic Coupling.

    Science.gov (United States)

    Eckert, Paulo Roberto; Flores Filho, Aly Ferreira; Perondi, Eduardo; Ferri, Jeferson; Goltz, Evandro

    2016-03-11

    This paper proposes a design methodology for linear actuators, considering thermal and electromagnetic coupling with geometrical and temperature constraints, that maximizes force density and minimizes force ripple. The method allows defining an actuator for given specifications in a step-by-step way so that requirements are met and the temperature within the device is maintained under or equal to its maximum allowed for continuous operation. According to the proposed method, the electromagnetic and thermal models are built with quasi-static parametric finite element models. The methodology was successfully applied to the design of a linear cylindrical actuator with a dual quasi-Halbach array of permanent magnets and a moving-coil. The actuator can produce an axial force of 120 N and a stroke of 80 mm. The paper also presents a comparative analysis between results obtained considering only an electromagnetic model and the thermal-electromagnetic coupled model. This comparison shows that the final designs for both cases differ significantly, especially regarding its active volume and its electrical and magnetic loading. Although in this paper the methodology was employed to design a specific actuator, its structure can be used to design a wide range of linear devices if the parametric models are adjusted for each particular actuator.

  9. Methodologies for 2011 economic reports

    DEFF Research Database (Denmark)

    Nielsen, Rasmus

    STECF’s Expert Working Group 11-03 convened in Athens (28th March – 1st April, 2011) to discuss and seek agreement on the content, indicators, methodologies and format of the 2011 Annual Economic Reports (AER) on the EU fishing fleet, the fish processing and the aquaculture sectors. Proposals...... for improved contents and the overall structure were discussed. Templates for the national and EU overview chapters for the EU the fish processing and the aquaculture sectors were produced. Indicators for the EU fishing fleet and fish processing reports were reviewed; new indicators for the fish processing...... and the aquaculture sector reports were proposed. And topics of special interest were proposed for all three reports....

  10. Proposed systematic methodology for analysis of Pb-210 radioactivity in residues produced in Brazilian natural gas pipes; Proposicao de um modelo analitico sistematico da atividade de Pb-210 em residuos gerados em linhas de gas

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Aloisio Cordilha

    2003-11-15

    Since the 80's, the potential radiological hazards due to the handling of solid wastes contaminated with Rn-222 long-lived progeny - Pb-210 in special - produced in gas pipes and removed by pig operations have been subject of growing concern abroad our country. Nevertheless, little or no attention has been paid to this matter in the Brazilian plants up to now, being these hazards frequently underestimated or even ignored. The main purpose of this work was to propose a systematic methodology for analysis of Pb-210 radioactivity in black powder samples from some Brazilian plants, through the evaluation of direct Pb-210 gamma spectrometry and Bi-210 beta counting technical viabilities. In both cases, one in five samples of black powder analysed showed relevant activity (above 1Bq/kg) of Pb-210, being these results probably related to particular features of each specific plant (production levels, reservoir geochemical profile, etc.), in such a way that a single pattern is not observed. For the proposed methodology, gamma spectrometry proved to be the most reliable technique, showing a 3.5% standard deviation, and, for a 95% confidence level, overall fitness in the range of Pb-210 concentration of activity presented in the standard sample reference sheet, provided by IAEA for intercomparison purposes. In the Brazilian scene, however, the availability of statistically supported evidences is insufficient to allow the potential radiological hazard due to the management of black powder to be discarded. Thus, further research efforts are recommended in order to detect the eventually critical regions or plants where gas exploration, production and processing practices will require a regular program of radiological surveillance, in the near future. (author)

  11. Towards an MDA-based development methodology

    NARCIS (Netherlands)

    Gavras, Anastasius; Belaunde, Mariano; Ferreira Pires, Luis; Andrade Almeida, João; Oquendo, Flavio; Warboys, Brian C.; Morrison, Ron

    2004-01-01

    This paper proposes a development methodology for distributed applications based on the principles and concepts of the Model-Driven Architecture (MDA). The paper identifies phases and activities of an MDA-based development trajectory, and defines the roles and products of each activity in accordance

  12. Methodology, Measurement and Analysis of Flow Table Update Characteristics in Hardware OpenFlow Switches

    KAUST Repository

    Kuźniar, Maciej; Pereší ni, Peter; Kostić, Dejan; Canini, Marco

    2018-01-01

    and performance characteristics is essential for ensuring successful and safe deployments.We propose a systematic methodology for SDN switch performance analysis and devise a series of experiments based on this methodology. The methodology relies on sending a

  13. Audit Methodology for IT Governance

    Directory of Open Access Journals (Sweden)

    Mirela GHEORGHE

    2010-01-01

    Full Text Available The continuous development of the new IT technologies was followed up by a rapid integration of them at the organization level. The management of the organizations face a new challenge: structural redefinition of the IT component in order to create plus value and to minimize IT risks through an efficient management of all IT resources of the organization. These changes have had a great impact on the governance of the IT component. The paper proposes an audit methodology of the IT Governance at the organization level. From this point of view the developed audit strategy is a strategy based on risks to enable IT auditor to study from the best angle efficiency and effectiveness of the IT Governance structure. The evaluation of the risks associated with IT Governance is a key process in planning the audit mission which will allow the identification of the segments with increased risks. With now ambition for completeness, the proposed methodology provides the auditor a useful tool in the accomplishment of his mission.

  14. Methodology for estimating biomass energy potential and its application to Colombia

    International Nuclear Information System (INIS)

    Gonzalez-Salazar, Miguel Angel; Morini, Mirko; Pinelli, Michele; Spina, Pier Ruggero; Venturini, Mauro; Finkenrath, Matthias; Poganietz, Witold-Roger

    2014-01-01

    Highlights: • Methodology to estimate the biomass energy potential and its uncertainty at a country level. • Harmonization of approaches and assumptions in existing assessment studies. • The theoretical and technical biomass energy potential in Colombia are estimated in 2010. - Abstract: This paper presents a methodology to estimate the biomass energy potential and its associated uncertainty at a country level when quality and availability of data are limited. The current biomass energy potential in Colombia is assessed following the proposed methodology and results are compared to existing assessment studies. The proposed methodology is a bottom-up resource-focused approach with statistical analysis that uses a Monte Carlo algorithm to stochastically estimate the theoretical and the technical biomass energy potential. The paper also includes a proposed approach to quantify uncertainty combining a probabilistic propagation of uncertainty, a sensitivity analysis and a set of disaggregated sub-models to estimate reliability of predictions and reduce the associated uncertainty. Results predict a theoretical energy potential of 0.744 EJ and a technical potential of 0.059 EJ in 2010, which might account for 1.2% of the annual primary energy production (4.93 EJ)

  15. How to write a research proposal?

    Science.gov (United States)

    Sudheesh, K; Duggappa, Devika Rani; Nethra, S S

    2016-09-01

    Writing the proposal of a research work in the present era is a challenging task due to the constantly evolving trends in the qualitative research design and the need to incorporate medical advances into the methodology. The proposal is a detailed plan or 'blueprint' for the intended study, and once it is completed, the research project should flow smoothly. Even today, many of the proposals at post-graduate evaluation committees and application proposals for funding are substandard. A search was conducted with keywords such as research proposal, writing proposal and qualitative using search engines, namely, PubMed and Google Scholar, and an attempt has been made to provide broad guidelines for writing a scientifically appropriate research proposal.

  16. A methodology of SiP testing based on boundary scan

    Science.gov (United States)

    Qin, He; Quan, Haiyang; Han, Yifei; Zhu, Tianrui; Zheng, Tuo

    2017-10-01

    System in Package (SiP) play an important role in portable, aerospace and military electronic with the microminiaturization, light weight, high density, and high reliability. At present, SiP system test has encountered the problem on system complexity and malfunction location with the system scale exponentially increase. For SiP system, this paper proposed a testing methodology and testing process based on the boundary scan technology. Combining the character of SiP system and referencing the boundary scan theory of PCB circuit and embedded core test, the specific testing methodology and process has been proposed. The hardware requirement of the under test SiP system has been provided, and the hardware platform of the testing has been constructed. The testing methodology has the character of high test efficiency and accurate malfunction location.

  17. Integration of an iterative methodology for exergoeconomic improvement of thermal systems with a process simulator

    International Nuclear Information System (INIS)

    Vieira, Leonardo S.; Donatelli, Joao L.; Cruz, Manuel E.

    2004-01-01

    In this paper, we present the development and automated implementation of an iterative methodology for exergoeconomic improvement of thermal systems integrated with a process simulator, so as to be applicable to real, complex plants. The methodology combines recent available exergoeconomic techniques with new qualitative and quantitative criteria for the following tasks: (i) identification of decision variables that affect system total cost and exergetic efficiency; (ii) hierarchical classification of components; (iii) identification of predominant terms in the component total cost; and (iv) choice of main decision variables in the iterative process. To show the strengths and potential advantages of the proposed methodology, it is here applied to the benchmark CGAM cogeneration system. The results obtained are presented and discussed in detail and are compared to those reached using a mathematical optimization procedure

  18. Reversible logic synthesis methodologies with application to quantum computing

    CERN Document Server

    Taha, Saleem Mohammed Ridha

    2016-01-01

    This book opens the door to a new interesting and ambitious world of reversible and quantum computing research. It presents the state of the art required to travel around that world safely. Top world universities, companies and government institutions  are in a race of developing new methodologies, algorithms and circuits on reversible logic, quantum logic, reversible and quantum computing and nano-technologies. In this book, twelve reversible logic synthesis methodologies are presented for the first time in a single literature with some new proposals. Also, the sequential reversible logic circuitries are discussed for the first time in a book. Reversible logic plays an important role in quantum computing. Any progress in the domain of reversible logic can be directly applied to quantum logic. One of the goals of this book is to show the application of reversible logic in quantum computing. A new implementation of wavelet and multiwavelet transforms using quantum computing is performed for this purpose. Rese...

  19. An ontological case base engineering methodology for diabetes management.

    Science.gov (United States)

    El-Sappagh, Shaker H; El-Masri, Samir; Elmogy, Mohammed; Riad, A M; Saddik, Basema

    2014-08-01

    Ontology engineering covers issues related to ontology development and use. In Case Based Reasoning (CBR) system, ontology plays two main roles; the first as case base and the second as domain ontology. However, the ontology engineering literature does not provide adequate guidance on how to build, evaluate, and maintain ontologies. This paper proposes an ontology engineering methodology to generate case bases in the medical domain. It mainly focuses on the research of case representation in the form of ontology to support the case semantic retrieval and enhance all knowledge intensive CBR processes. A case study on diabetes diagnosis case base will be provided to evaluate the proposed methodology.

  20. 76 FR 23605 - New Proposed Collection; Comment Request; Study Logistic Formative Research Methodology Studies...

    Science.gov (United States)

    2011-04-27

    ...; Comment Request; Study Logistic Formative Research Methodology Studies for the National Children's Study... maximize the efficiency (measured by scientific robustness, participant and infrastructure burden, and cost... assess the feasibility, acceptability, and cost of the recruitment strategy, study procedures, and...

  1. A Methodological Conundrum: Comparing Schools in Scotland and England

    Science.gov (United States)

    Marshall, Bethan; Gibbons, Simon

    2015-01-01

    This article considers a conundrum in research methodology; the fact that, in the main, you have to use a social science-based research methodology if you want to look at what goes on in a classroom. This article proposes an alternative arts-based research method instead based on the work of Eisner, and before him Dewey, where one can use the more…

  2. A performance-oriented power transformer design methodology using multi-objective evolutionary optimization.

    Science.gov (United States)

    Adly, Amr A; Abd-El-Hafiz, Salwa K

    2015-05-01

    Transformers are regarded as crucial components in power systems. Due to market globalization, power transformer manufacturers are facing an increasingly competitive environment that mandates the adoption of design strategies yielding better performance at lower costs. In this paper, a power transformer design methodology using multi-objective evolutionary optimization is proposed. Using this methodology, which is tailored to be target performance design-oriented, quick rough estimation of transformer design specifics may be inferred. Testing of the suggested approach revealed significant qualitative and quantitative match with measured design and performance values. Details of the proposed methodology as well as sample design results are reported in the paper.

  3. Spintronic logic design methodology based on spin Hall effect–driven magnetic tunnel junctions

    International Nuclear Information System (INIS)

    Kang, Wang; Zhang, Youguang; Zhao, Weisheng; Wang, Zhaohao; Klein, Jacques-Olivier; Lv, Weifeng

    2016-01-01

    Conventional complementary metal-oxide-semiconductor (CMOS) technology is now approaching its physical scaling limits to enable Moore’s law to continue. Spintronic devices, as one of the potential alternatives, show great promise to replace CMOS technology for next-generation low-power integrated circuits in nanoscale technology nodes. Until now, spintronic memory has been successfully commercialized. However spintronic logic still faces many critical challenges (e.g. direct cascading capability and small operation gain) before it can be practically applied. In this paper, we propose a standard complimentary spintronic logic (CSL) design methodology to form a CMOS-like logic design paradigm. Using the spin Hall effect (SHE)-driven magnetic tunnel junction (MTJ) device as an example, we demonstrate CSL implementation, functionality and performance. This logic family provides a unified design methodology for spintronic logic circuits and partly solves the challenges of direct cascading capability and small operation gain in the previously proposed spintronic logic designs. By solving a modified Landau–Lifshitz–Gilbert equation, the magnetization dynamics in the free layer of the MTJ is theoretically described and a compact electrical model is developed. With this electrical model, numerical simulations have been performed to evaluate the functionality and performance of the proposed CSL design. Simulation results demonstrate that the proposed CSL design paradigm is rather promising for low-power logic computing. (paper)

  4. Methodology to extract of humic substances of lombricompost and evaluation of their performance

    International Nuclear Information System (INIS)

    Torrente Trujillo, Armando; Gomez Zambrano, Jairo

    1995-01-01

    The present works was developed at the facultad de ciencias agropecuarias of the Universidad Nacional de Colombia, located in Palmira City Valle del Cauca. The research consisted in the development of the appropriate methodology to extract humic substances contained in lombricompost and on the other hand to evaluate the performance in organic carbon of the fulvic and humic acids. The lombricompost source consisted in organic matter such as: dug cow, filter press cake, coffee pulp and Paspalum notatum with and without application of lime. The results showed sixteen steps, which are completely described in the work, obtain the proposal methodology. By the other hand this method showed that humic acids in the lombricompost are richer than fulvic ones; besides among the four sources used in the experiment the filter press cake was different and higher in carbon yield than coffee pulp and Paspalum notatum

  5. A combined reaction class approach with integrated molecular orbital+molecular orbital (IMOMO) methodology: A practical tool for kinetic modeling

    International Nuclear Information System (INIS)

    Truong, Thanh N.; Maity, Dilip K.; Truong, Thanh-Thai T.

    2000-01-01

    We present a new practical computational methodology for predicting thermal rate constants of reactions involving large molecules or a large number of elementary reactions in the same class. This methodology combines the integrated molecular orbital+molecular orbital (IMOMO) approach with our recently proposed reaction class models for tunneling. With the new methodology, we show that it is possible to significantly reduce the computational cost by several orders of magnitude while compromising the accuracy in the predicted rate constants by less than 40% over a wide range of temperatures. Another important result is that the computational cost increases only slightly as the system size increases. (c) 2000 American Institute of Physics

  6. The development of a checklist to enhance methodological quality in intervention programs

    Directory of Open Access Journals (Sweden)

    Salvador Chacón-Moscoso

    2016-11-01

    Full Text Available The methodological quality of primary studies is an important issue when performing meta-analyses or systematic reviews. Nevertheless, there are no clear criteria for how methodological quality should be analyzed. Controversies emerge when considering the various theoretical and empirical definitions, especially in relation to three interrelated problems: the lack of representativeness, utility, and feasibility. In this article, we (a systematize and summarize the available literature about methodological quality in primary studies; (b propose a specific, parsimonious, 12-item checklist to empirically define the methodological quality of primary studies based on a content validity study; and (c present an inter-coder reliability study for the resulting 12 items. This paper provides a precise and rigorous description of the development of this checklist, highlighting the clearly specified criteria for the inclusion of items and a substantial inter-coder agreement in the different items. Rather than simply proposing another checklist, however, it then argues that the list constitutes an assessment tool with respect to the representativeness, utility, and feasibility of the most frequent methodological quality items in the literature, one that provides practitioners and researchers with clear criteria for choosing items that may be adequate to their needs. We propose individual methodological features as indicators of quality, arguing that these need to be taken into account when designing, implementing, or evaluating an intervention program. This enhances methodological quality of intervention programs and fosters the cumulative knowledge based on meta-analyses of these interventions. Future development of the checklist is discussed.

  7. Development of thermal-hydraulic analysis methodology for multiple modules of water-cooled breeder blanket in fusion DEMO reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Geon-Woo; Lee, Jeong-Hun [Department of Nuclear Engineering, Seoul National University 1 Gwanak-ro, Gwanak-gu, Seoul 151-744 (Korea, Republic of); Cho, Hyoung-Kyu, E-mail: chohk@snu.ac.kr [Department of Nuclear Engineering, Seoul National University 1 Gwanak-ro, Gwanak-gu, Seoul 151-744 (Korea, Republic of); Park, Goon-Cherl [Department of Nuclear Engineering, Seoul National University 1 Gwanak-ro, Gwanak-gu, Seoul 151-744 (Korea, Republic of); Im, Kihak [National Fusion Research Institute, 169-148, Yuseong-gu, Daejeon 305-806 (Korea, Republic of)

    2016-02-15

    Highlights: • A methodology to simulate the K-DEMO blanket system was proposed. • The results were compared with the CFD, to verify the prediction capability of MARS. • 46 Blankets in a single sector in K-DEMO were simulated using MARS-KS. • Supervisor program was devised to handle each blanket module individually. • The calculation results showed the flow rates, pressure drops, and temperatures. - Abstract: According to the conceptual design of the fusion DEMO reactor proposed by the National Fusion Research Institute of Korea, the water-cooled breeding blanket system incorporates a total of 736 blanket modules. The heat flux and neutron wall loading to each blanket module vary along their poloidal direction, and hence, thermal analysis for at least one blanket sector is required to confirm that the temperature limitations of the materials are satisfied in all the blanket modules. The present paper proposes a methodology of thermal analysis for multiple modules of the blanket system using a nuclear reactor thermal-hydraulic analysis code, MARS-KS. In order to overcome the limitations of the code, caused by the restriction on the number of computational nodes, a supervisor program was devised, which handles each blanket module separately at first, and then corrects the flow rate, considering pressure drops that occur in each module. For a feasibility test of the proposed methodology, 46 blankets in a single sector were simulated; the calculation results of the parameters, such as mass flow, pressure drops, and temperature distribution in the multiple blanket modules showed that the multi-module analysis method can be used for efficient thermal-hydraulic analysis of the fusion DEMO reactor.

  8. A methodology for quantitatively managing the bug fixing process using Mahalanobis Taguchi system

    Directory of Open Access Journals (Sweden)

    Boby John

    2015-12-01

    Full Text Available The controlling of bug fixing process during the system testing phase of software development life cycle is very important for fixing all the detected bugs within the scheduled time. The presence of open bugs often delays the release of the software or result in releasing the software with compromised functionalities. These can lead to customer dissatisfaction, cost overrun and eventually the loss of market share. In this paper, the authors propose a methodology to quantitatively manage the bug fixing process during system testing. The proposed methodology identifies the critical milestones in the system testing phase which differentiates the successful projects from the unsuccessful ones using Mahalanobis Taguchi system. Then a model is developed to predict whether a project is successful or not with the bug fix progress at critical milestones as control factors. Finally the model is used to control the bug fixing process. It is found that the performance of the proposed methodology using Mahalanobis Taguchi system is superior to the models developed using other multi-dimensional pattern recognition techniques. The proposed methodology also reduces the number of control points providing the managers with more options and flexibility to utilize the bug fixing resources across system testing phase. Moreover the methodology allows the mangers to carry out mid- course corrections to bring the bug fixing process back on track so that all the detected bugs can be fixed on time. The methodology is validated with eight new projects and the results are very encouraging.

  9. Methodology for Evaluating Safety System Operability using Virtual Parameter Network

    International Nuclear Information System (INIS)

    Park, Sukyoung; Heo, Gyunyoung; Kim, Jung Taek; Kim, Tae Wan

    2014-01-01

    KAERI (Korea Atomic Energy Research Institute) and UTK (University of Tennessee Knoxville) are working on the I-NERI project to suggest complement of this problem. This research propose the methodology which provide the alternative signal in case of unable guaranteed reliability of some instrumentation with KAERI. Proposed methodology is assumed that several instrumentations are working normally under the power supply condition because we do not consider the instrumentation survivability itself. Thus, concept of the Virtual Parameter Network (VPN) is used to identify the associations between plant parameters. This paper is extended version of the paper which was submitted last KNS meeting by changing the methodology and adding the result of the case study. In previous research, we used Artificial Neural Network (ANN) inferential technique for estimation model but every time this model showed different estimate value due to random bias each time. Therefore Auto-Associative Kernel Regression (AAKR) model which have same number of inputs and outputs is used to estimate. Also the importance measures in the previous method depend on estimation model but importance measure of improved method independent on estimation model. Also importance index of previous method depended on estimation model but importance index of improved method is independent on estimation model. In this study, we proposed the methodology to identify the internal state of power plant when severe accident happens also it has been validated through case study. SBLOCA which has large contribution to severe accident is considered as initiating event and relationship amongst parameter has been identified. VPN has ability to identify that which parameter has to be observed and which parameter can be alternative to the missing parameter when some instruments are failed in severe accident. In this study we have identified through results that commonly number 2, 3, 4 parameter has high connectivity while

  10. Methodology for Evaluating Safety System Operability using Virtual Parameter Network

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sukyoung; Heo, Gyunyoung [Kyung Hee Univ., Yongin (Korea, Republic of); Kim, Jung Taek [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kim, Tae Wan [Kepco International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2014-05-15

    KAERI (Korea Atomic Energy Research Institute) and UTK (University of Tennessee Knoxville) are working on the I-NERI project to suggest complement of this problem. This research propose the methodology which provide the alternative signal in case of unable guaranteed reliability of some instrumentation with KAERI. Proposed methodology is assumed that several instrumentations are working normally under the power supply condition because we do not consider the instrumentation survivability itself. Thus, concept of the Virtual Parameter Network (VPN) is used to identify the associations between plant parameters. This paper is extended version of the paper which was submitted last KNS meeting by changing the methodology and adding the result of the case study. In previous research, we used Artificial Neural Network (ANN) inferential technique for estimation model but every time this model showed different estimate value due to random bias each time. Therefore Auto-Associative Kernel Regression (AAKR) model which have same number of inputs and outputs is used to estimate. Also the importance measures in the previous method depend on estimation model but importance measure of improved method independent on estimation model. Also importance index of previous method depended on estimation model but importance index of improved method is independent on estimation model. In this study, we proposed the methodology to identify the internal state of power plant when severe accident happens also it has been validated through case study. SBLOCA which has large contribution to severe accident is considered as initiating event and relationship amongst parameter has been identified. VPN has ability to identify that which parameter has to be observed and which parameter can be alternative to the missing parameter when some instruments are failed in severe accident. In this study we have identified through results that commonly number 2, 3, 4 parameter has high connectivity while

  11. Accounting Research Methodology Textbook Development to Provide College Students in Accounting Subject

    OpenAIRE

    Muchson, Mochamad

    2015-01-01

    Due to the lackness of a research accounting methodology book (accounting research methodology) causing difficulties for college students to understand the steps of research in accounting, so that's the textbook is needed to completing Accounting Research Methodology book that has been exist and aimed to guide students for proposal composing or accounting research report so that it is easier to study by students.This textbook contains of accounting research methodology definition, accounting ...

  12. Proposal methodology for Land Carbon Accounting across Europe

    Science.gov (United States)

    Simon, A.; Ivanov, E.; Anaya-Romero, M.; Weber, J.-L.

    2012-04-01

    The need to account natural resources as capital, in the same way as we account economic and financial resources, is getting an important awareness-raising channel for governments, producers, and consumers in order to manage the environment capital. Besides that, the forthcoming Part II of the revised System of Integrated Environmental and Economic Accounting will enclose a framework for experimental ecosystem accounts. This conceptual framework is an initiative led by the European Environment Agency and the World Bank WAVES global partnership for which robust data and indicators are needed. In this context, the aim of this work is to demonstrate a preliminary methodology for land carbon account across Europe. The study area covers EU+38. The territorial unit used was the Socio-Ecological Landscape Units based on the Land Cover Functional Units and other geographical dimensions such as relief, belonging to a river basin, or proximity to the sea. Finally, the grid size used for accounting was 1km x 1km. The characteristic indicator considered for ecosystem capital carbon accounts is the carbon content which is derived from the Net Primary Production (NPP) and its removal by agriculture, forestry. Accordingly, the output data obtained were the stocks of carbon recorded in tons of carbon. The current approach is based on the combination of CORINE Land cover, traditional remote sensing (RS) indicators like NDVI - Normalised Difference Vegetation Index and the modern advances on RS techniques where new indicators like GPP (Gross Primary Productivity) and NPP. Other additional attributes were temperature, precipitation and vegetation type or Land cover. Different national and European data sources were used for the analysis as well as downscales procedures. In the present work soil carbon content were assumed to be a fixed fraction. Nevertheless further research will also take into account soil carbon data considering scenarios of land use change.

  13. Tourism Methodologies - New Perspectives, Practices and Procedures

    DEFF Research Database (Denmark)

    This volume offers methodological discussions within the multidisciplinary field of tourism and shows how tourism researchers develop and apply new tourism methodologies. The book is presented as an anthology, giving voice to many diverse researchers who reflect on tourism methodology in differen...... codings and analysis, and tapping into the global network of social media.......This volume offers methodological discussions within the multidisciplinary field of tourism and shows how tourism researchers develop and apply new tourism methodologies. The book is presented as an anthology, giving voice to many diverse researchers who reflect on tourism methodology in different...... in interview and field work situations, and how do we engage with the performative aspects of tourism as a field of study? The book acknowledges that research is also performance and that it constitutes an aspect of intervention in the situations and contexts it is trying to explore. This is an issue dealt...

  14. Fast underdetermined BSS architecture design methodology for real time applications.

    Science.gov (United States)

    Mopuri, Suresh; Reddy, P Sreenivasa; Acharyya, Amit; Naik, Ganesh R

    2015-01-01

    In this paper, we propose a high speed architecture design methodology for the Under-determined Blind Source Separation (UBSS) algorithm using our recently proposed high speed Discrete Hilbert Transform (DHT) targeting real time applications. In UBSS algorithm, unlike the typical BSS, the number of sensors are less than the number of the sources, which is of more interest in the real time applications. The DHT architecture has been implemented based on sub matrix multiplication method to compute M point DHT, which uses N point architecture recursively and where M is an integer multiples of N. The DHT architecture and state of the art architecture are coded in VHDL for 16 bit word length and ASIC implementation is carried out using UMC 90 - nm technology @V DD = 1V and @ 1MHZ clock frequency. The proposed architecture implementation and experimental comparison results show that the DHT design is two times faster than state of the art architecture.

  15. Proposed Methodology for Design of Carbon Fiber Reinforced Polymer Spike Anchors into Reinforced Concrete

    Energy Technology Data Exchange (ETDEWEB)

    MacFarlane, Eric Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-05-26

    The included methodology, calculations, and drawings support design of Carbon Fiber Reinforced Polymer (CFRP) spike anchors for securing U-wrap CFRP onto reinforced concrete Tbeams. This content pertains to an installation in one of Los Alamos National Laboratory’s facilities. The anchors are part of a seismic rehabilitation to the subject facility. The information contained here is for information purposes only. The reader is encouraged to verify all equations, details, and methodology prior to usage in future projects. However, development of the content contained here complied with Los Alamos National Laboratory’s NQA-1 quality assurance program for nuclear structures. Furthermore, the formulations and details came from the referenced published literature. This literature represents the current state of the art for FRP anchor design. Construction personnel tested the subject anchor design to the required demand level demonstrated in the calculation. The testing demonstrated the ability of the anchors noted to carry loads in excess of 15 kips in direct tension. The anchors were not tested to failure in part because of the hazards associated with testing large-capacity tensile systems to failure. The calculation, methodology, and drawing originator was Eric MacFarlane of Los Alamos National Laboratory’s (LANL) Office of Seismic Hazards and Risk Mitigation (OSHRM). The checker for all components was Mike Salmon of the LANL OSHRM. The independent reviewers of all components were Insung Kim and Loring Wyllie of Degenkolb Engineers. Note that Insung Kim contributed to the initial formulations in the calculations that pertained directly to his Doctoral research.

  16. How to write a research proposal?

    Directory of Open Access Journals (Sweden)

    K Sudheesh

    2016-01-01

    Full Text Available Writing the proposal of a research work in the present era is a challenging task due to the constantly evolving trends in the qualitative research design and the need to incorporate medical advances into the methodology. The proposal is a detailed plan or ′blueprint′ for the intended study, and once it is completed, the research project should flow smoothly. Even today, many of the proposals at post-graduate evaluation committees and application proposals for funding are substandard. A search was conducted with keywords such as research proposal, writing proposal and qualitative using search engines, namely, PubMed and Google Scholar, and an attempt has been made to provide broad guidelines for writing a scientifically appropriate research proposal.

  17. 77 FR 70451 - Proposed Collection; Comment Request; Methodological Studies for the Population Assessment of...

    Science.gov (United States)

    2012-11-26

    ... are no capital, operating or maintenance costs. Table 1--Estimated Annual Reporting Burden Summary... Collection: Title: Methodological Studies for Population Assessment of Tobacco and Health (PATH) Study. Type... concurrent basis]. Affected Public: Individuals. Type of Respondents: Youth (ages 12-17) and Adults (ages 18...

  18. Predicting human miRNA target genes using a novel evolutionary methodology

    KAUST Repository

    Aigli, Korfiati; Kleftogiannis, Dimitrios A.; Konstantinos, Theofilatos; Spiros, Likothanassis; Athanasios, Tsakalidis; Seferina, Mavroudi

    2012-01-01

    The discovery of miRNAs had great impacts on traditional biology. Typically, miRNAs have the potential to bind to the 3'untraslated region (UTR) of their mRNA target genes for cleavage or translational repression. The experimental identification of their targets has many drawbacks including cost, time and low specificity and these are the reasons why many computational approaches have been developed so far. However, existing computational approaches do not include any advanced feature selection technique and they are facing problems concerning their classification performance and their interpretability. In the present paper, we propose a novel hybrid methodology which combines genetic algorithms and support vector machines in order to locate the optimal feature subset while achieving high classification performance. The proposed methodology was compared with two of the most promising existing methodologies in the problem of predicting human miRNA targets. Our approach outperforms existing methodologies in terms of classification performances while selecting a much smaller feature subset. © 2012 Springer-Verlag.

  19. Predicting human miRNA target genes using a novel evolutionary methodology

    KAUST Repository

    Aigli, Korfiati

    2012-01-01

    The discovery of miRNAs had great impacts on traditional biology. Typically, miRNAs have the potential to bind to the 3\\'untraslated region (UTR) of their mRNA target genes for cleavage or translational repression. The experimental identification of their targets has many drawbacks including cost, time and low specificity and these are the reasons why many computational approaches have been developed so far. However, existing computational approaches do not include any advanced feature selection technique and they are facing problems concerning their classification performance and their interpretability. In the present paper, we propose a novel hybrid methodology which combines genetic algorithms and support vector machines in order to locate the optimal feature subset while achieving high classification performance. The proposed methodology was compared with two of the most promising existing methodologies in the problem of predicting human miRNA targets. Our approach outperforms existing methodologies in terms of classification performances while selecting a much smaller feature subset. © 2012 Springer-Verlag.

  20. A Generic Methodology for Superstructure Optimization of Different Processing Networks

    DEFF Research Database (Denmark)

    Bertran, Maria-Ona; Frauzem, Rebecca; Zhang, Lei

    2016-01-01

    In this paper, we propose a generic computer-aided methodology for synthesis of different processing networks using superstructure optimization. The methodology can handle different network optimization problems of various application fields. It integrates databases with a common data architecture......, a generic model to represent the processing steps, and appropriate optimization tools. A special software interface has been created to automate the steps in the methodology workflow, allow the transfer of data between tools and obtain the mathematical representation of the problem as required...

  1. A methodology for identification and control of electro-mechanical actuators.

    Science.gov (United States)

    Tutunji, Tarek A; Saleem, Ashraf

    2015-01-01

    Mechatronic systems are fully-integrated engineering systems that are composed of mechanical, electronic, and computer control sub-systems. These integrated systems use electro-mechanical actuators to cause the required motion. Therefore, the design of appropriate controllers for these actuators are an essential step in mechatronic system design. In this paper, a three-stage methodology for real-time identification and control of electro-mechanical actuator plants is presented, tested, and validated. First, identification models are constructed from experimental data to approximate the plants' response. Second, the identified model is used in a simulation environment for the purpose of designing a suitable controller. Finally, the designed controller is applied and tested on the real plant through Hardware-in-the-Loop (HIL) environment. The described three-stage methodology provides the following practical contributions: •Establishes an easy-to-follow methodology for controller design of electro-mechanical actuators.•Combines off-line and on-line controller design for practical performance.•Modifies the HIL concept by using physical plants with computer control (rather than virtual plants with physical controllers). Simulated and experimental results for two case studies, induction motor and vehicle drive system, are presented in order to validate the proposed methodology. These results showed that electromechanical actuators can be identified and controlled using an easy-to-duplicate and flexible procedure.

  2. Multidisciplinary teaching in swimming: methodological reflection and proposal of check list

    Directory of Open Access Journals (Sweden)

    Sofia Canossa

    2007-12-01

    Full Text Available The present study proposes a new multidisciplinary approach related to teaching in swimming. Swimming is an interdisciplinary physical activity, which can be truly important at the level of the motor learning and experimentation in aquatic activities. In the present manuscript, it was compared the present reality of teaching in Swimming with a new perspective, this one with a multidisciplinary scope. Following the referred analysis, it was presented a discussion about the orientation and adequacy of the contents of the Swimming curriculum for children and youngsters, which are populations with specific characteristics and development necessities. In this sense, after stating the relevance of a multidisciplinary perspective, it was proposed a new approach for basic aquatic motor skills acquisition based on four disciplines: swimming, water polo, synchronised swimming and platform diving. This was made taking into account the initial stage of swimming teaching, i.e., aquatic readiness. This proposal aims mainly at implementing the teaching of Swimming at a multidisciplinary point of view that, in our opinion, is urgent, namely due to the small expression that the aquatic modalities traditionally considered as swimming satellites (water polo, synchronised swimming and platform diving have in the Portuguese sports context.

  3. A proposal of new nuclear communication scheme based on qualitative research

    International Nuclear Information System (INIS)

    Yagi, Ekou; Takahashi, Makoto; Kitamura, Masaharu

    2007-01-01

    An action research project called dialogue forum has been conducted in this study. The essential constituent of the project is a series of repetitive dialogue sessions carried out by lay citizens, nuclear experts, and a facilitator. One important feature of the project is that the study has been conducted based on the qualitative research methodology. The changes in opinions and attitude of the dialogue participants have been analyzed by an ethno-methodological approach. The observations are summarized as follows. The opinions of the citizen participants showed a significant shift from emotional to practical representations along with the progression of the dialogue sessions. Meanwhile, their attitude showed a marked tendency from problem-statement-oriented to problem-solving-oriented representation. On the other hand, the statements of the expert participants showed a significant shift from expert-based to citizen-based risk recognition and description, and their attitude showed a clear tendency from teaching-oriented to colearning-oriented thinking. These changes of opinions and attitude have been interpreted as a coevolving rather than a single process. It can be stressed that this type of change is most important for the reestablishment of mutual trust between the citizens and the nuclear experts. In this regard The Process Model of Coevolution of Risk Recognition' has been proposed as a guideline for developing a new scheme of public communication concerning nuclear technology. The proposed process model of coevolution of risk recognition is regarded to be essential for appropriate relationship management between nuclear technology and society in the near future. (author)

  4. Proposal of methodology for to implement system of environmental management at works of pipeline; Proposta de metodologia para implementacao de SGA - Sistema de Gestao Ambiental em obras de dutos

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, Maria Rita de Cassia de Souza [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2008-07-01

    Proposal presentation of the methodology to implements the environmental management system in works of pipelines with the objective to guarantee the efficacy in the management of the environmental impact and aspects of the activities of the construction and assembly of pipelines, identifiable through the environmental impact study. It initially makes brief explanation over the environmental national politics through of some topics of the mains generals norms of the legislation. After them, the presentation of the methodology through the model of management PDCA: Plan - Do - Check - Act, recommended for the ABNT NBR ISO 14001:2004. For each stage of the model are listed the activities and, of exceptional manner, it makes explanation of the environmental performance evaluation, accordant the ABNT NBR ISO 10031:2004. (author)

  5. Verification of Fault Tree Models with RBDGG Methodology

    International Nuclear Information System (INIS)

    Kim, Man Cheol

    2010-01-01

    Currently, fault tree analysis is widely used in the field of probabilistic safety assessment (PSA) of nuclear power plants (NPPs). To guarantee the correctness of fault tree models, which are usually manually constructed by analysts, a review by other analysts is widely used for verifying constructed fault tree models. Recently, an extension of the reliability block diagram was developed, which is named as RBDGG (reliability block diagram with general gates). The advantage of the RBDGG methodology is that the structure of a RBDGG model is very similar to the actual structure of the analyzed system and, therefore, the modeling of a system for a system reliability and unavailability analysis becomes very intuitive and easy. The main idea of the development of the RBDGG methodology is similar to that of the development of the RGGG (Reliability Graph with General Gates) methodology. The difference between the RBDGG methodology and RGGG methodology is that the RBDGG methodology focuses on the block failures while the RGGG methodology focuses on the connection line failures. But, it is also known that an RGGG model can be converted to an RBDGG model and vice versa. In this paper, a new method for the verification of the constructed fault tree models using the RBDGG methodology is proposed and demonstrated

  6. A Methodology to Infer Crop Yield Response to Climate Variability and Change Using Long-Term Observations

    Directory of Open Access Journals (Sweden)

    Manfred A. Lange

    2013-11-01

    Full Text Available A new methodology to extract crop yield response to climate variability and change from long-term crop yield observations is presented in this study. In contrast to the existing first-difference approach (FDA, the proposed methodology considers that the difference in value between crop yields of two consecutive years reflects necessarily the contributions of climate and management conditions, especially at large spatial scales where both conditions may vary significantly from one year to the next. Our approach was applied to remove the effect of non-climatic factors on crop yield and, hence, to isolate the effect of the observed climate change between 1961 and 2006 on three widely crops grown in three Mediterranean countries—namely wheat, corn and potato—using national-level crop yield observations’ time-series. Obtained results show that the proposed methodology provides us with a ground basis to improve substantially our understanding of crop yield response to climate change at a scale that is relevant to large-scale estimations of agricultural production and to food security analyses; and therefore to reduce uncertainties in estimations of potential climate change effects on agricultural production. Furthermore, a comparison of outputs of our methodology and FDA outputs yielded a difference in terms of maize production in Egypt, for example, that exceeds the production of some neighbouring countries.

  7. Development of new assessment methodology for locally corroded pipe

    International Nuclear Information System (INIS)

    Lim, Hwan; Shim, Do Jun; Kim, Yun Jae; Kim, Young Jin

    2002-01-01

    In this paper, a unified methodology based on the local stress concept to estimate residual strength of locally thinned pipes is proposed. An underlying idea of the proposed methodology is that the local stress in the minimum section for locally thinned pipe is related to the reference stress, popularly used in creep problems. Then the problem remains how to define the reference stress, that is the reference load. Extensive three-dimensional Finite Element (FE) analyses were performed to simulate full-scale pipe tests conducted for various shapes of wall thinned area under internal pressure and bending moment. Based on these FE results, the reference load is proposed, which is independent of materials. A natural outcome of this method is the maximum load capacity. By comparing with existing test results, it is shown that the reference stress is related to the fracture stress, which in turn can be posed as the fracture criterion of locally thinned pipes. The proposed method is powerful as it can be easily generalised to more complex problems, such as pipe bends and tee-joints

  8. Development of a consistent Monte Carlo-deterministic transport methodology based on the method of characteristics and MCNP5

    International Nuclear Information System (INIS)

    Karriem, Z.; Ivanov, K.; Zamonsky, O.

    2011-01-01

    This paper presents work that has been performed to develop an integrated Monte Carlo- Deterministic transport methodology in which the two methods make use of exactly the same general geometry and multigroup nuclear data. The envisioned application of this methodology is in reactor lattice physics methods development and shielding calculations. The methodology will be based on the Method of Long Characteristics (MOC) and the Monte Carlo N-Particle Transport code MCNP5. Important initial developments pertaining to ray tracing and the development of an MOC flux solver for the proposed methodology are described. Results showing the viability of the methodology are presented for two 2-D general geometry transport problems. The essential developments presented is the use of MCNP as geometry construction and ray tracing tool for the MOC, verification of the ray tracing indexing scheme that was developed to represent the MCNP geometry in the MOC and the verification of the prototype 2-D MOC flux solver. (author)

  9. CONTENT ANALYSIS IN PROJECT MANAGEMENT: PROPOSALOF A METHODOLOGICAL FRAMEWORK

    Directory of Open Access Journals (Sweden)

    Alessandro Prudêncio Lukosevicius

    2016-12-01

    Full Text Available Content analysis (CA is a popular approach among researchers from different areas, but incipient in project management (PM. However, the volume of usage apparently does not translate into application quality. The method receives constant criticism about the scientific rigor adopted, especially when led by junior researchers. This article proposes a methodological framework for CA and investigate the use of CA in PM research. To accomplish this goal, literature systematic review is conjugated with CA related to 23 articles from EBSCO base in the last 20 years (1996 – 2016. The findings showed that the proposed framework can help researchers better apply the CA and suggests that the use of the method in terms of quantity and quality in PM research should be expanded. In addition to the framework, another contribution of this research is an analysis of the use of CA in PM in the last 20 years.

  10. ON CURRICULAR PROPOSALS OF THE PORTUGUESE LANGUAGE: A DOCUMENT ANALYSIS IN JUIZ DE FORA (MG

    Directory of Open Access Journals (Sweden)

    Tânia Guedes MAGALHÃES

    2014-12-01

    Full Text Available This paper, whose objective is to analyze two curricular proposals of Portuguese from the Juiz de Fora City Hall (2001 and 2012, is an extract from a research entitled “On text genres and teaching: a collaborative research with teachers of Portuguese” (2011/2013. Text genres have been suggested by curricular proposals as a central object for teachers who work with Portuguese language teaching; for this, it is relevant to analyze the documents in the realm of the ongoing research. As theoretical references, we used authors who propose a didactic model based on the development of language skills and linguistic reasoning (MENDONÇA, 2006 which in turn are based on an interactional conception of language (BRONCKART, 1999; SCHNEUWLY; DOLZ, 2004. Document analysis was used as methodology, which envisions assessment of pieces of information in documents as well as their outcomes. The data show that the 2012 curricular proposal is more adequate to Portuguese language teaching than the first one, mainly for its theoretical and methodological grounding, which emphasize the development of students’ linguistic and discursive skills. Guided by an interactionist notion – unlike the norm-centered 2001 proposal – the 2012 document fosters the development of linguistic reasoning and usage skills.

  11. Evaluation of proliferation resistance using the INPRO methodology

    International Nuclear Information System (INIS)

    Yang, Myung Seung; Park, Joo Hwan; Ko, Won Il; Song, Kee Chan; Choi, Kun Mo; Kim, Jin Kyoung

    2007-01-01

    The IAEA launched the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) and developed the INPRO Methodology to provide guidelines and to assess the characteristics of a future innovative nuclear energy system in areas such as safety, economics, waste management, and proliferation resistance. The proliferation resistance area of the INPRO Methodology is reviewed here, and modifications for further improvements are proposed. The evaluation metrics including the evaluation parameters, evaluation scales and acceptance limits are developed for a practical application of the methodology to assess the proliferation resistance. The proliferation resistant characteristics of the DUPIC fuel cycle are assessed by applying the modified INPRO Methodology based on the developed evaluation metrics and acceptance criteria. The evaluation procedure and the metrics can be utilized as a reference for an evaluation of the proliferation resistance of a future innovative nuclear energy system

  12. A Methodology for Introducing Competitive Anxiety and Pressure in VR Sports Training

    Directory of Open Access Journals (Sweden)

    Ferran eArgelaguet Sanz

    2015-04-01

    Full Text Available Athletes' performances are influenced by internal and external factors, including their psychological state and environmental factors, especially during competition. As a consequence, current training programs include stress management. In this paper, we explore whether highly immersive systems can be used for such training programs. First, we propose methodological guidelines to design sport training scenarios both on considering the elements that a training routine must have, and how external factors might influence the participant. The proposed guidelines are based on Flow and social-evaluative threat theories. Second, to illustrate and validate our methodology, we designed an experimental setup reproducing a ten meter Olympic pistol shooting. We analyzed whether changes in the environment are able to induce changes in user performance, physiological responses and the subjective perception of the task. The simulation included stressors in order to raise a social-evaluative threat, such as aggressive public behavior or unforced errors, increasing the pressure while performing the task. The results showed significant differences in their subjective impressions, trends in the behavioral and physiological data were also observed. Taken together, our results suggest that highly immersive systems could be further used for training in sports.

  13. Application of integrated fuzzy VIKOR & AHP methodology to contractor ranking

    Directory of Open Access Journals (Sweden)

    Mohamad Rahim Ramezaniyan

    2012-08-01

    Full Text Available Contractor selection is a critical activity, which plays an important role in the overall success of any construction project. The implementation of fuzzy multiple criteria decision attribute (MCDA in selecting contractors has the advantage of rendering subjective and implicit decision making more objective and transparent. An additional merit of fuzzy MCDA is the ability to accommodate quantitative and qualitative information. In this paper, an integrated VIKOR–AHP methodology is proposed to make a selection among the alternative contractors in one of Iranian construction industry projects. In the proposed methodology, the weights of the selection criteria are determined by fuzzy pairwise comparison matrices of AHP.

  14. Methodology to design a municipal solid waste pre-collection system. A case study

    International Nuclear Information System (INIS)

    Gallardo, A.; Carlos, M.; Peris, M.; Colomer, F.J.

    2015-01-01

    Highlights: • MSW recovery starts at homes; therefore it is important to facilitate it to people. • Additionally, to optimize MSW collection a previous pre-collection must be planned. • A methodology to organize pre-collection considering several factors is presented. • The methodology has been verified applying it to a Spanish middle town. - Abstract: The municipal solid waste (MSW) management is an important task that local governments as well as private companies must take into account to protect human health, the environment and to preserve natural resources. To design an adequate MSW management plan the first step consists in defining the waste generation and composition patterns of the town. As these patterns depend on several socio-economic factors it is advisable to organize them previously. Moreover, the waste generation and composition patterns may vary around the town and over the time. Generally, the data are not homogeneous around the city as the number of inhabitants is not constant nor it is the economic activity. Therefore, if all the information is showed in thematic maps, the final waste management decisions can be made more efficiently. The main aim of this paper is to present a structured methodology that allows local authorities or private companies who deal with MSW to design its own MSW management plan depending on the available data. According to these data, this paper proposes two ways of action: a direct way when detailed data are available and an indirect way when there is a lack of data and it is necessary to take into account bibliographic data. In any case, the amount of information needed is considerable. This paper combines the planning methodology with the Geographic Information Systems to present the final results in thematic maps that make easier to interpret them. The proposed methodology is a previous useful tool to organize the MSW collection routes including the selective collection. To verify the methodology it has

  15. A methodology for development of biocatalytic processes

    DEFF Research Database (Denmark)

    Lima Ramos, Joana

    are available. The first case study presents a rational approach for defining a development strategy for multi-enzymatic processes. The proposed methodology requires a profound and structured knowledge of the multi-enzyme systems, integrating chemistry, biological and process engineering. In order to suggest......). These process metrics can often be attained by improvements in the reaction chemistry, the biocatalyst, and/or by process engineering, which often requires a complex process development strategy. Interestingly this complexity, which arises from the need for integration of biological and process technologies...... and their relationship with the overall process is not clear.The work described in this thesis presents a methodological approach for early stage development of biocatalytic processes, understanding and dealing with the reaction, biocatalyst and process constraints. When applied, this methodology has a decisive role...

  16. THE MEASUREMENT METHODOLOGY IMPROVEMENT OF THE HORIZONTAL IRREGULARITIES IN PLAN

    Directory of Open Access Journals (Sweden)

    O. M. Patlasov

    2015-08-01

    Full Text Available Purpose. Across the track superstructure (TSS there are structures where standard approach to the decision on the future of their operation is not entirely correct or acceptable. In particular, it concerns the track sections which are sufficiently quickly change their geometric parameters: the radius of curvature, angle of rotation, and the like. As an example, such portions of TSS may include crossovers where their component is within the so-called connecting part, which at a sufficiently short length, substantially changes curvature. The estimation of the position in terms of a design on the basis of the existing technique (by the difference in the adjacent arrows bending is virtually impossible. Therefore it is proposed to complement and improve the methodology for assessing the situation of the curve in plan upon difference in the adjacent versine. Methodology. The possible options for measuring horizontal curves in the plan were analyzed. The most adequate method, which does not contradict existing on the criterion of the possibility of using established standards was determined. The ease of measurement and calculation was took into account. Findings. Qualitative and quantitative verification of the proposed and existing methods showed very good agreement of the measurement results. This gives grounds to assert that this methodology can be recommended to the workers of track facilities in the assessment of horizontal irregularities in plan not only curves, but also within the connecting part of switch congresses. Originality. The existing method of valuation of the geometric position of the curves in the plan was improved. It does not create new regulations, and all results are evaluated by existing norms. Practical value. The proposed technique makes it possible, without creating a new regulatory framework, to be attached to existing one, and expanding the boundaries of its application. This method can be used not only for ordinary curves

  17. A dual response surface optimization methodology for achieving uniform coating thickness in powder coating process

    Directory of Open Access Journals (Sweden)

    Boby John

    2015-09-01

    Full Text Available The powder coating is an economic, technologically superior and environment friendly painting technique compared with other conventional painting methods. However large variation in coating thickness can reduce the attractiveness of powder coated products. The coating thickness variation can also adversely affect the surface appearance and corrosion resistivity of the product. This can eventually lead to customer dissatisfaction and loss of market share. In this paper, the author discusses a dual response surface optimization methodology to minimize the thickness variation around the target value of powder coated industrial enclosures. The industrial enclosures are cabinets used for mounting the electrical and electronic equipment. The proposed methodology consists of establishing the relationship between the coating thickness & the powder coating process parameters and developing models for the mean and variance of coating thickness. Then the powder coating process is optimized by minimizing the standard deviation of coating thickness subject to the constraint that the thickness mean would be very close to the target. The study resulted in achieving a coating thickness mean of 80.0199 microns for industrial enclosures, which is very close to the target value of 80 microns. A comparison of the results of the proposed approach with that of existing methodologies showed that the suggested method is equally good or even better than the existing methodologies. The result of the study is also validated with a new batch of industrial enclosures.

  18. Methodologies for Social Life Cycle Assessment

    DEFF Research Database (Denmark)

    Jørgensen, Andreas; Le Bocq, Agathe; Nazakina, Liudmila

    2008-01-01

    Goal, Scope and Background. In recent years several different approaches towards Social Life Cycle Assessment (SLCA) have been developed. The purpose of this review is to compare these approaches in order to highlight methodological differences and general shortcomings. SLCA has several similarit......Goal, Scope and Background. In recent years several different approaches towards Social Life Cycle Assessment (SLCA) have been developed. The purpose of this review is to compare these approaches in order to highlight methodological differences and general shortcomings. SLCA has several...... similarities with other social assessment tools, but in order to limit the review, only claims to address social impacts from an LCA-like framework is considered. Main Features. The review is to a large extent based on conference proceedings and reports of which some are not easily accessible, since very...... stage in the product life cycle. Another very important difference among the proposals is their position towards the use of generic data. Several of the proposals argue that social impacts are connected to the conduct of the company leading to the conclusion that each individual company in the product...

  19. A study on the advanced statistical core thermal design methodology

    International Nuclear Information System (INIS)

    Lee, Seung Hyuk

    1992-02-01

    A statistical core thermal design methodology for generating the limit DNBR and the nominal DNBR is proposed and used in assessing the best-estimate thermal margin in a reactor core. Firstly, the Latin Hypercube Sampling Method instead of the conventional Experimental Design Technique is utilized as an input sampling method for a regression analysis to evaluate its sampling efficiency. Secondly and as a main topic, the Modified Latin Hypercube Sampling and the Hypothesis Test Statistics method is proposed as a substitute for the current statistical core thermal design method. This new methodology adopts 'a Modified Latin Hypercube Sampling Method' which uses the mean values of each interval of input variables instead of random values to avoid the extreme cases that arise in the tail areas of some parameters. Next, the independence between the input variables is verified through 'Correlation Coefficient Test' for statistical treatment of their uncertainties. And the distribution type of DNBR response is determined though 'Goodness of Fit Test'. Finally, the limit DNBR with one-sided 95% probability and 95% confidence level, DNBR 95/95 ' is estimated. The advantage of this methodology over the conventional statistical method using Response Surface and Monte Carlo simulation technique lies in its simplicity of the analysis procedure, while maintaining the same level of confidence in the limit DNBR result. This methodology is applied to the two cases of DNBR margin calculation. The first case is the application to the determination of the limit DNBR where the DNBR margin is determined by the difference between the nominal DNBR and the limit DNBR. The second case is the application to the determination of the nominal DNBR where the DNBR margin is determined by the difference between the lower limit value of the nominal DNBR and the CHF correlation limit being used. From this study, it is deduced that the proposed methodology gives a good agreement in the DNBR results

  20. User-inspired design methodology using Affordance Structure Matrix (ASM for construction projects

    Directory of Open Access Journals (Sweden)

    Maheswari J. Uma

    2017-01-01

    Full Text Available Traditionally, design phase of construction projects is often performed with incomplete and inaccurate user preferences. This is due to inefficiencies in the methodologies used for capturing the user requirements that can subsequently lead to inconsistencies and result in non-optimised end-result. Iterations and subsequent reworks due to such design inefficiencies is one of the major reasons for unsuccessful project delivery as they impact project performance measures such as time and cost among others. The existing design theories and practice are primarily based on functional requirements. Function-based design deals with design of artifact alone, which may yield favourable or unfavourable consequences with the design artifact. However, incorporating other interactions such as interactions between user & designer is necessary for optimised end-result. Hence, the objective of this research work is to devise a systematic design methodology considering all the three interactions among users, designers and artefacts for improved design efficiency. In this study, it has been attempted to apply the theory of affordances in a case project that involves the design of an offshore facility. A step-by-step methodology for developing Affordance Structure Matrix (ASM, which integrates House of Quality (HOQ and Design Structure Matrix (DSM, is proposed that can effectively capture the user requirements. HOQ is a popular quality management tool for capturing client requirements and DSM is a matrix-based tool that can capture the interdependency among the design entities. The proposed methodology utilises the strengths of both the tools, as DSM compliments HOQ in the process. In this methodology, different affordances such as AUA (Artifact-User-Affordance, AAA (Artifact-Artifact-Affordance and DDA (Designer-Designer-Affordance are captured systematically. Affordance is considered to be user-driven in this context that is in contrast to prevailing design

  1. New methodology for a person identification system

    Indian Academy of Sciences (India)

    Home; Journals; Sadhana; Volume 31; Issue 3. New methodology for a person identification system. R Bremananth A Chitra. Volume 31 Issue 3 June 2006 pp 259-276 ... Experimental results illustrate that the proposed method has been easily espoused in elections, bank transactions and other security applications.

  2. Monitoring sustainable biomass flows : General methodology development

    NARCIS (Netherlands)

    Goh, Chun Sheng; Junginger, Martin; Faaij, André

    Transition to a bio-based economy will create new demand for biomass, e.g. the increasing use of bioenergy, but the impacts on existing markets are unclear. Furthermore, there is a growing public concern on the sustainability of biomass. This study proposes a methodological framework for mapping

  3. Development of Thermal-hydraulic Analysis Methodology for Multi-module Breeding Blankets in K-DEMO

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Geon-Woo; Lee, Jeong-Hun; Park, Goon-Cherl; Cho, Hyoung-Kyu [Seoul National University, Seoul (Korea, Republic of); Im, Kihak [National Fusion Research Institute, Daejeon (Korea, Republic of)

    2015-05-15

    In this paper, the purpose of the analyses is to extend the capability of MARS-KS to the entire blanket system which includes a few hundreds of single blanket modules. Afterwards, the plan for the whole blanket system analysis using MARS-KS is introduced and the result of the multiple blanket module analysis is summarized. A thermal-hydraulic analysis code for a nuclear reactor safety, MARS-KS, was applied for the conceptual design of the K-DEMO breeding blanket thermal analysis. Then, a methodology to simulate multiple blanket modules was proposed, which uses a supervisor program to handle each blanket module individually at first and then distribute the flow rate considering pressure drops arises in each module. For a feasibility test of the proposed methodology, 10 outboard blankets in a toroidal field sector were simulated, which are connected with each other through the inlet and outlet common headers. The calculation results of flow rates, pressure drops, and temperatures showed the validity of the calculation and thanks to the parallelization using MPI, almost linear speed-up could be obtained.

  4. Methodological development for selection of significant predictors explaining fatal road accidents.

    Science.gov (United States)

    Dadashova, Bahar; Arenas-Ramírez, Blanca; Mira-McWilliams, José; Aparicio-Izquierdo, Francisco

    2016-05-01

    Identification of the most relevant factors for explaining road accident occurrence is an important issue in road safety research, particularly for future decision-making processes in transport policy. However model selection for this particular purpose is still an ongoing research. In this paper we propose a methodological development for model selection which addresses both explanatory variable and adequate model selection issues. A variable selection procedure, TIM (two-input model) method is carried out by combining neural network design and statistical approaches. The error structure of the fitted model is assumed to follow an autoregressive process. All models are estimated using Markov Chain Monte Carlo method where the model parameters are assigned non-informative prior distributions. The final model is built using the results of the variable selection. For the application of the proposed methodology the number of fatal accidents in Spain during 2000-2011 was used. This indicator has experienced the maximum reduction internationally during the indicated years thus making it an interesting time series from a road safety policy perspective. Hence the identification of the variables that have affected this reduction is of particular interest for future decision making. The results of the variable selection process show that the selected variables are main subjects of road safety policy measures. Published by Elsevier Ltd.

  5. A Clustering Methodology of Web Log Data for Learning Management Systems

    Science.gov (United States)

    Valsamidis, Stavros; Kontogiannis, Sotirios; Kazanidis, Ioannis; Theodosiou, Theodosios; Karakos, Alexandros

    2012-01-01

    Learning Management Systems (LMS) collect large amounts of data. Data mining techniques can be applied to analyse their web data log files. The instructors may use this data for assessing and measuring their courses. In this respect, we have proposed a methodology for analysing LMS courses and students' activity. This methodology uses a Markov…

  6. Multi-Objective Optimization of Moving-magnet Linear Oscillatory Motor Using Response Surface Methodology with Quantum-Behaved PSO Operator

    Science.gov (United States)

    Lei, Meizhen; Wang, Liqiang

    2018-01-01

    To reduce the difficulty of manufacturing and increase the magnetic thrust density, a moving-magnet linear oscillatory motor (MMLOM) without inner-stators was Proposed. To get the optimal design of maximum electromagnetic thrust with minimal permanent magnetic material, firstly, the 3D finite element analysis (FEA) model of the MMLOM was built and verified by comparison with prototype experiment result. Then the influence of design parameters of permanent magnet (PM) on the electromagnetic thrust was systematically analyzed by the 3D FEA to get the design parameters. Secondly, response surface methodology (RSM) was employed to build the response surface model of the new MMLOM, which can obtain an analytical model of the PM volume and thrust. Then a multi-objective optimization methods for design parameters of PM, using response surface methodology (RSM) with a quantum-behaved PSO (QPSO) operator, was proposed. Then the way to choose the best design parameters of PM among the multi-objective optimization solution sets was proposed. Then the 3D FEA of the optimal design candidates was compared. The comparison results showed that the proposed method can obtain the best combination of the geometric parameters of reducing the PM volume and increasing the thrust.

  7. Methodology for wind turbine blade geometry optimization

    Energy Technology Data Exchange (ETDEWEB)

    Perfiliev, D.

    2013-11-01

    Nowadays, the upwind three bladed horizontal axis wind turbine is the leading player on the market. It has been found to be the best industrial compromise in the range of different turbine constructions. The current wind industry innovation is conducted in the development of individual turbine components. The blade constitutes 20-25% of the overall turbine budget. Its optimal operation in particular local economic and wind conditions is worth investigating. The blade geometry, namely the chord, twist and airfoil type distributions along the span, responds to the output measures of the blade performance. Therefore, the optimal wind blade geometry can improve the overall turbine performance. The objectives of the dissertation are focused on the development of a methodology and specific tool for the investigation of possible existing wind blade geometry adjustments. The novelty of the methodology presented in the thesis is the multiobjective perspective on wind blade geometry optimization, particularly taking simultaneously into account the local wind conditions and the issue of aerodynamic noise emissions. The presented optimization objective approach has not been investigated previously for the implementation in wind blade design. The possibilities to use different theories for the analysis and search procedures are investigated and sufficient arguments derived for the usage of proposed theories. The tool is used for the test optimization of a particular wind turbine blade. The sensitivity analysis shows the dependence of the outputs on the provided inputs, as well as its relative and absolute divergences and instabilities. The pros and cons of the proposed technique are seen from the practical implementation, which is documented in the results, analysis and conclusion sections. (orig.)

  8. How to emerge from the conservatism in clinical research methodology?

    Science.gov (United States)

    Kotecki, Nuria; Penel, Nicolas; Awada, Ahmad

    2017-09-01

    Despite recent changes in clinical research methodology, many challenges remain in drug development methodology. Advances in molecular biology and cancer treatments have changed the clinical research landscape. Thus, we moved from empirical clinical oncology to molecular and immunological therapeutic approaches. Along with this move, adapted dose-limiting toxicities definitions, endpoints, and dose escalation methods have been proposed. Moreover, the classical frontier between phase I, phase II, and phase III has become unclear in particular for immunological approaches. So, investigators are facing major challenges in drug development methodology. We propose to individualize clinical research using innovative approaches to significantly improve patient outcomes and targeting what is considered unmet need. Integrating high level of translational research and performing well designed biomarker studies with great potential for clinical practice are of utmost importance. This could be performed within new models of clinical research networks and by building a strong collaboration between academic, cooperative groups, on-site investigators, and pharma.

  9. Development of enterprise architecture management methodology for teaching purposes

    Directory of Open Access Journals (Sweden)

    Dmitry V. Kudryavtsev

    2017-01-01

    Full Text Available Enterprise architecture is considered as a certain object of management, providing in business a general view of the enterprise and the mutual alignment of parts of this enterprise into a single whole, and as the discipline that arose based on this object. The architectural approach to the modeling and design of the enterprise originally arose in the field of information technology and was used to design information systems and technical infrastructure, as well as formalize business requirements. Since the early 2000’s enterprise architecture is increasingly used in organizational development and business transformation projects, especially if information technologies are involved. Enterprise architecture allows describing, analyzing and designing the company from the point of view of its structure, functioning and goal setting (motivation.In the context of this approach, the enterprise is viewed as a system of services, processes, goals and performance indicators, organizational units, information systems, data, technical facilities, etc. Enterprise architecture implements the idea of a systematic approach to managing and changing organizations in the digital economy where business is strongly dependent on information technologies.This increases the relevance of the suggested approach at the present time, when companies need to create and successfully implement a digital business strategy.Teaching enterprise architecture in higher educational institutions is a difficult task due to the interdisciplinary of this subject, its generalized nature and close connection with practical experience. In addition, modern enterprise architecture management methodologies are complex for students and contain many details that are relevant for individual situations.The paper proposes a simplified methodology for enterprise architecture management, which on the one hand will be comprehensible to students, and on the other hand, it will allow students to apply

  10. Design methodology of Dutch banknotes

    Science.gov (United States)

    de Heij, Hans A. M.

    2000-04-01

    Since the introduction of a design methodology for Dutch banknotes, the quality of Dutch paper currency has improved in more than one way. The methodology is question provides for (i) a design policy, which helps fix clear objectives; (ii) design management, to ensure a smooth cooperation between the graphic designer, printer, papermaker an central bank, (iii) a program of requirements, a banknote development guideline for all parties involved. This systematic approach enables an objective selection of design proposals, including security features. Furthermore, the project manager obtains regular feedback from the public by conducting market surveys. Each new design of a Netherlands Guilder banknote issued by the Nederlandsche Bank of the past 50 years has been an improvement on its predecessor in terms of value recognition, security and durability.

  11. Integrating FMEA in a Model-Driven Methodology

    Science.gov (United States)

    Scippacercola, Fabio; Pietrantuono, Roberto; Russo, Stefano; Esper, Alexandre; Silva, Nuno

    2016-08-01

    Failure Mode and Effects Analysis (FMEA) is a well known technique for evaluating the effects of potential failures of components of a system. FMEA demands for engineering methods and tools able to support the time- consuming tasks of the analyst. We propose to make FMEA part of the design of a critical system, by integration into a model-driven methodology. We show how to conduct the analysis of failure modes, propagation and effects from SysML design models, by means of custom diagrams, which we name FMEA Diagrams. They offer an additional view of the system, tailored to FMEA goals. The enriched model can then be exploited to automatically generate FMEA worksheet and to conduct qualitative and quantitative analyses. We present a case study from a real-world project.

  12. Methodological guidelines for developing accident modification functions

    DEFF Research Database (Denmark)

    Elvik, Rune

    2015-01-01

    This paper proposes methodological guidelines for developing accident modification functions. An accident modification function is a mathematical function describing systematic variation in the effects of road safety measures. The paper describes ten guidelines. An example is given of how to use...... limitations in developing accident modification functions are the small number of good evaluation studies and the often huge variation in estimates of effect. It is therefore still not possible to develop accident modification functions for very many road safety measures. © 2015 Elsevier Ltd. All rights...... the guidelines. The importance of exploratory analysis and an iterative approach in developing accident modification functions is stressed. The example shows that strict compliance with all the guidelines may be difficult, but represents a level of stringency that should be strived for. Currently the main...

  13. Proposal for product development model focused on ce certification methodology

    Directory of Open Access Journals (Sweden)

    Nathalia Marcia Goulart Pinheiro

    2015-09-01

    Full Text Available This paper presents a critical analysis comparing 21 product development models in order to identify whether these structures meet the demands Product Certification of the European Community (CE. Furthermore, it presents a product development model, comprising the steps in the models analyzed, including improvements in activities for referred product certification. The proposed improvements are justified by the growing quest for the internationalization of products and processes within companies.

  14. Bisociation of artistic and academic methodologies

    DEFF Research Database (Denmark)

    Heinrich, Falk

    This paper elaborates on the integration of academic and artistic methodologies within the field of art and technology. The term art and technology refers to a recognized research field and to higher education programmes, such as the BA program Art and Technology at Aalborg University. Art...... with and design of teaching designs aims at the description of a methodology and a heuristic for drafting concrete teaching designs....... and discovery. Koestler proposes the concept of bisociation for academic discoveries and artistic revealings alike by looking at the results of this creation (work of art, scientific discovery). However, my question is, whether the blending of academic and artistic discourses and methodologies––being a second...

  15. 78 FR 69805 - Periodic Reporting (Proposals Six Through Nine)

    Science.gov (United States)

    2013-11-21

    ... Postal Service proposes to update its methodology for calculating the costs for Philatelic Sales and the... MODS Operation Groups for Productivity Calculations The Postal Service states that Proposal Eight would... MODS productivity data (TPF or TPH per workhour) for a variety of operation groups related to letter...

  16. Functional entropy variables: A new methodology for deriving thermodynamically consistent algorithms for complex fluids, with particular reference to the isothermal Navier–Stokes–Korteweg equations

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Ju, E-mail: jliu@ices.utexas.edu [Institute for Computational Engineering and Sciences, The University of Texas at Austin, 201 East 24th Street, 1 University Station C0200, Austin, TX 78712 (United States); Gomez, Hector [Department of Mathematical Methods, University of A Coruña, Campus de Elviña, s/n, 15192 A Coruña (Spain); Evans, John A.; Hughes, Thomas J.R. [Institute for Computational Engineering and Sciences, The University of Texas at Austin, 201 East 24th Street, 1 University Station C0200, Austin, TX 78712 (United States); Landis, Chad M. [Aerospace Engineering and Engineering Mechanics, The University of Texas at Austin, 210 East 24th Street, 1 University Station C0600, Austin, TX 78712 (United States)

    2013-09-01

    We propose a new methodology for the numerical solution of the isothermal Navier–Stokes–Korteweg equations. Our methodology is based on a semi-discrete Galerkin method invoking functional entropy variables, a generalization of classical entropy variables, and a new time integration scheme. We show that the resulting fully discrete scheme is unconditionally stable-in-energy, second-order time-accurate, and mass-conservative. We utilize isogeometric analysis for spatial discretization and verify the aforementioned properties by adopting the method of manufactured solutions and comparing coarse mesh solutions with overkill solutions. Various problems are simulated to show the capability of the method. Our methodology provides a means of constructing unconditionally stable numerical schemes for nonlinear non-convex hyperbolic systems of conservation laws.

  17. A Methodology for Optimization in Multistage Industrial Processes: A Pilot Study

    Directory of Open Access Journals (Sweden)

    Piotr Jarosz

    2015-01-01

    Full Text Available The paper introduces a methodology for optimization in multistage industrial processes with multiple quality criteria. Two ways of formulation of optimization problem and four different approaches to solve the problem are considered. Proposed methodologies were tested first on a virtual process described by benchmark functions and next were applied in optimization of multistage lead refining process.

  18. New Acquisition Protocol of 18F-Choline PET/CT in Prostate Cancer Patients: Review of the Literature about Methodology and Proposal of Standardization

    Directory of Open Access Journals (Sweden)

    Sotirios Chondrogiannis

    2014-01-01

    Full Text Available Purpose. (1 To evaluate a new acquisition protocol of 18F-choline (FCH PET/CT for prostate cancer patients (PC, (2 to review acquisition 18F-choline PET/CT methodology, and (3 to propose a standardized acquisition protocol on FCH PET/CT in PC patients. Materials. 100 consecutive PC patients (mean age 70.5 years, mean PSA 21.35 ng/mL were prospectively evaluated. New protocol consisted of an early scan of the pelvis immediately after the injection of the tracer (1 bed position of 4 min followed by a whole body scan at one 1 hour. Early and 1 hour images were compared for interfering activity and pathologic findings. Results. The overall detection rate of FCH PET/CT was 64%. The early static images of the pelvis showed absence of radioactive urine in ureters, bladder, or urethra which allowed a clean evaluation of the prostatic fossae. Uptake in the prostatic region was better visualized in the early phase in 26% (7/30 of cases. Other pelvic pathologic findings (bone and lymph nodes were visualized in both early and late images. Conclusion. Early 18F-choline images improve visualization of abnormal uptake in prostate fossae. All pathologic pelvic deposits (prostate, lymph nodes, and bone were visualized in both early and late images.

  19. New systematic methodology for incorporating dynamic heat transfer modelling in multi-phase biochemical reactors.

    Science.gov (United States)

    Fernández-Arévalo, T; Lizarralde, I; Grau, P; Ayesa, E

    2014-09-01

    This paper presents a new modelling methodology for dynamically predicting the heat produced or consumed in the transformations of any biological reactor using Hess's law. Starting from a complete description of model components stoichiometry and formation enthalpies, the proposed modelling methodology has integrated successfully the simultaneous calculation of both the conventional mass balances and the enthalpy change of reaction in an expandable multi-phase matrix structure, which facilitates a detailed prediction of the main heat fluxes in the biochemical reactors. The methodology has been implemented in a plant-wide modelling methodology in order to facilitate the dynamic description of mass and heat throughout the plant. After validation with literature data, as illustrative examples of the capability of the methodology, two case studies have been described. In the first one, a predenitrification-nitrification dynamic process has been analysed, with the aim of demonstrating the easy integration of the methodology in any system. In the second case study, the simulation of a thermal model for an ATAD has shown the potential of the proposed methodology for analysing the effect of ventilation and influent characterization. Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. PENERAPAN CRITICAL REVIEW ARTIKEL PEMBELAJARAN IPA UNTUK MENINGKATKAN KEMAMPUAN MAHASISWA DALAM MENYUSUN PROPOSAL SKRIPSI

    Directory of Open Access Journals (Sweden)

    Parmin -

    2012-10-01

    Full Text Available Penelitian bertujuan untuk meningkatkan kemampuan mahasiswa dalam menyusun proposal skripsi melalui penerapan critical review artikel ilmiah bersumber dari jurnal. Penelitian dirancang dengan metode penelitian tindakan kelas. Hasil penelitian menunjukkan 63% proposal skripsi mahasiswa pada mata kuliah Metodologi Penelitian mendapatkan nilai diatas 80. Berdasarkan hasil yang telah diperoleh dapat disimpulkan penerapan critical review atau kajian kritis terhadap artikel ilmiah dapat meningkatkan kemampuan mahasiswa dalam menyusun proposal penelitian.   The aims of this research is to improve students' ability in developing a proposal thesis by applying critical review of scientific articles come from journals. The research is designed by class action research. The results showed 63% of students thesis proposals on Research Methodology course scored above 80. Based on the results obtained it can be concluded that the application has been critical review or critical study of scientific articles can enhance students' ability in preparing research proposals.

  1. The social representation of public space for the design and management of sustainable territories A theoretical-practical and methodological proposal for participatory planning

    Directory of Open Access Journals (Sweden)

    Heidi Natalie Contreras-Lovich

    2016-04-01

    Full Text Available La representación social del espacio público para el diseño y gestión de territorios sostenibles. Una propuesta teórica-práctica y metodológica para un urbanismo participativo. ResumenA partir de la gestión integral participativa se orienta el desarrollo espacial de los territorios vistos desde el individuo, para comprender la gestión, acción y ordenamiento territorial, desde la diferencia entre la ciudad entendida como lo que es y el espacio público como objeto de observación. Las vías para recolectar la información fueron la revisión bibliográfica y, a partir de la aplicación de una metodología mixta, se evidenciaron las representaciones vivenciales de los individuos que construyen el saber y el conocimiento a partir del espacio cultural vivido, en donde las experiencias y las prácticas del espacio prevalecen en el desarrollo de un urbanismo participativo. La propuesta se consolida a partir del hacer, el saber y el evaluar, en una trialéctica del ambiente humanizado. Se concluye con los aportes de la propuesta en términos teóricos, prácticos y metodológicos, con el fin de validar una gestión humana participativa en la cual el individuo se vaya convirtiendo en un ser creativo que fomente la calidad de vida y el bienestar social.Palabras clave: desarrollo urbano, diseño urbano, espacio público, gestión urbana, imaginarios urbanos, participación ciudadana. The social representation of public space for the design and management of sustainable territoriesA theoretical-practical and methodological proposal for participatory planningAbstractFrom participatory integrated management, spatial development of the territories seen by the individual is oriented to understand the management, action and land from the difference between the city understood as what it is and public space as an object of observation. The ways to collect the information were the literature review and from the application of a mixed methodology

  2. Mechanism analysis and evaluation methodology of regenerative braking contribution to energy efficiency improvement of electrified vehicles

    International Nuclear Information System (INIS)

    Lv, Chen; Zhang, Junzhi; Li, Yutong; Yuan, Ye

    2015-01-01

    Highlights: • The energy flow of an electric vehicle with regenerative brake is analyzed. • Methodology for measuring the regen brake contribution is discussed. • Evaluation parameters of regen brake contribution are proposed. • Vehicle tests are carried out on chassis dynamometer. • Test results verify the evaluation method and parameters proposed. - Abstract: This article discusses the mechanism and evaluation methods of contribution brought by regenerative braking to electric vehicle’s energy efficiency improvement. The energy flow of an electric vehicle considering the braking energy regeneration was analyzed. Then, methodologies for measuring the contribution made by regenerative brake to vehicle energy efficiency improvement were introduced. Based on the energy flow analyzed, two different evaluation parameters were proposed. Vehicle tests were carried out on chassis dynamometer under typical driving cycles with three different control strategies. The experimental results the difference between the proposed two evaluation parameters, and demonstrated the feasibility and effectiveness of the evaluation methodologies proposed

  3. Assessment methodology applicable to safe decommissioning of Romanian VVR-S research reactor

    International Nuclear Information System (INIS)

    Baniu, O.; Vladescu, G.; Vidican, D.; Penescu, M.

    2002-01-01

    The paper contains the results of research activity performed by CITON specialists regarding the assessment methodology intended to be applied to safe decommissioning of the research reactors, developed taking into account specific conditions of the Romanian VVR-S Research Reactor. The Romanian VVR-S Research Reactor is an old reactor (1957) and its Decommissioning Plan is under study. The main topics of paper are as follows: Safety approach of nuclear facilities decommissioning. Applicable safety principles; Main steps of the proposed assessment methodology; Generic content of Decommissioning Plan. Main decommissioning activities. Discussion about the proposed Decommissioning Plan for Romanian Research Reactor; Safety risks which may occur during decommissioning activities. Normal decommissioning operations. Fault conditions. Internal and external hazards; Typical development of a scenario. Features, Events and Processes List. Exposure pathways. Calculation methodology. (author)

  4. Application of Response Surface Methodology in Optimizing a Three Echelon Inventory System

    Directory of Open Access Journals (Sweden)

    Seyed Hossein Razavi Hajiagha

    2014-01-01

    Full Text Available Inventory control is an important subject in supply chain management. In this paper, a three echelon production, distribution, inventory system composed of one producer, two wholesalers and a set of retailers has been considered. Costumers' demands follow a compound Poisson process and the inventory policy is a kind of continuous review (R, Q. In this paper, regarding the standard cost structure in an inventory model, the cost function of system has been approximated using Response Surface Methodology as a combination of designed experiments, simulation, regression analysis and optimization. The proposed methodology in this paper can be applied as a novel method in optimization of inventory policy of supply chains. Also, the joint optimization of inventory parameters, including reorder point and batch order size, is another advantage of the proposed methodology.

  5. METHODOLOGICAL CONTRIBUTION FOR THE ANALYSIS OF EMERGENT FRAGILITY: case study of the municipality of Colombo, Paraná.

    Directory of Open Access Journals (Sweden)

    Luciano de Almeida

    2009-06-01

    Full Text Available This paper proposes an adaptation of the methodology of Environmental Fragility in order to detect Emergent Fragility.  We discuss the need for methods for measuring the impact of agriculture  which take different agricultural practices and ways of using natural resources into account. This methodological analysis is carried out through a case study of the municipality of Colombo, Paraná, in the Greater Curitiba Metropolitan Region.  This municipality is situated in an area of water springs and above an aquifer. It can be characterized by the presence of conventional and intensive vegetable production as well as the cultivation of several annual crops.   We elaborated several charts on Environmental Fragility (Potential and Emergent and evaluated the impact that agriculture has had on the quality and availability of water resources in the area we studied.  We went on to generate new parameters for distinguishing agricultural practices and their respective environmental impacts. Data have shown that, to the extent that different forms of agricultural use of soil are recognized and analyzed with greater precision, prospects for emergent fragility also vary. In the case of Colombo, data show that capacity for soil protection is greater when our proposed methodology is implemented, yet reaffirm the notion that agriculture that is practiced in areas where vegetables are grown implies high levels of soil vulnerability, also affecting water sources. Furthermore, we are led to conclude that the methodological procedures we propose are important in order to break with an erroneous view that generalizes the environmental impacts that agriculture causes, and in order to place greater value on the use of more  conservationist agricultural techniques.

  6. Methodology for Measuring the Complexity of Enterprise Information Systems

    Directory of Open Access Journals (Sweden)

    Ilja Holub

    2016-07-01

    Full Text Available The complexity of enterprise information systems is currently a challenge faced not only by IT professionals and project managers, but also by the users of such systems. Current methodologies and frameworks used to design and implement information systems do not specifically deal with the issue of their complexity and, apart from few exceptions, do not at all attempt to simplify the complexity. This article presents the author's own methodology for managing complexity, which can be used to complement any other methodology and which helps limit the growth of complexity. It introduces its own definition and metric of complexity, which it defines as the sum of entities of the individual UML models of the given system, which are selected according to the MMDIS methodology so as to consistently describe all relevant content dimensions of the system. The main objective is to propose a methodology to manage information system complexity and to verify it in practice on a real-life SAP implementation project.

  7. Scientific and methodological tools of cost management of enterprises: the main approaches and proposals

    Directory of Open Access Journals (Sweden)

    M. S. Dikunova

    2017-01-01

    Full Text Available A study of the economic nature of expenses for the industrial and defense enterprises occurs through the definition of a conceptual framework, harmonization of definitions of such things as cost, costs and expenses. In the study, these concepts are used as equivalent terms. In theory, there are different classifications of production cost and sales of products’ cost, a part of which is not used in practice. While analyzing the legislative division into elements it was proposed to complement the legal classification of an element of the costs of supply and distribution. The need for categorization is obvious, which is possible after considering the existing classifications of expenditures in the completely manufacturing process. This study shows that they do not solve all the tasks by the cost control. This problem can be solved if you set the relationship of costs and revenues with the actions of the persons, responsible for the use of resources and introduce so-called responsibility centers.The most promising methods include: cost-benefit analysis, planning on a zero basis, strategic cost management in the organization. The comparative analysis allowed to create the fundamental basis for their combined use in the creation of a mechanism to control costs, because this method is widely used in recent times by progressive enterprises. However, there are problems of its implementation with regard to the current economic situation in the state.The law regulates supply and marketing policy of the companies. The analysis of the used classifications in the supply and marketing systems of the enterprises allowed offering group costs. Their elements are described in detail and delimitation of the production costs is carried out. There is no such a division in practical activities of enterprises.To confirm this fact and clarify further research directions, we have considered the real status of the expenses for manufacture and realization of production

  8. State of the art and an integrated proposal to assess the energy gap in the implementation of cogeneration in industrial sector

    International Nuclear Information System (INIS)

    Escudero A, Ana C; Botero B, Sergio

    2009-01-01

    This paper shows the state of the art of decision making methodologies and theories that are in the literature and address topics related to the implementation of cogeneration systems. These topics are energy efficiency, new technologies adoption. These are analyzed in how they try to explain a complex phenomenon such as the energy gap (low implementation of technically and economically feasible energy efficiency projects), and classifying them in four methodological approaches. Based on the analysis of these approaches, a conceptual proposal is proposed, setting the decision maker as the central object of study, and the real (not the ideal) decision making process as a mechanism that facilitates the identification and understanding of the phenomenon from the bounded rationality principles.

  9. Methodological approaches to the assessment level of social responsibility

    OpenAIRE

    Vorona, E.

    2010-01-01

    A study of current approaches to assessing the level of social responsibility. Proposed methodological approach to evaluating the performance of the social responsibility of railway transport. Conceptual Basis of social reporting in rail transport.

  10. A methodology for the assessment of potential demand and optimal supply of entrepreneurial microcredit

    Directory of Open Access Journals (Sweden)

    Ayi Gavriel Ayayi

    2012-04-01

    Full Text Available We propose a methodology for the assessment of potential demand and optimal supply for microcredit. We show that the total demand is a combination of the demand that stems from the active poor plus the demand generated by a motivator agent among the entrepreneurial non-motivated poor. We use French data to provide an illustration of the assessment of potential demand for microcredit. We also show that the proportion of the potential demand satisfied by a microfinance institution depends on its objective i.e. either it is socially oriented or a profit maximizer.

  11. Integrated cost estimation methodology to support high-performance building design

    Energy Technology Data Exchange (ETDEWEB)

    Vaidya, Prasad; Greden, Lara; Eijadi, David; McDougall, Tom [The Weidt Group, Minnetonka (United States); Cole, Ray [Axiom Engineers, Monterey (United States)

    2007-07-01

    Design teams evaluating the performance of energy conservation measures (ECMs) calculate energy savings rigorously with established modelling protocols, accounting for the interaction between various measures. However, incremental cost calculations do not have a similar rigor. Often there is no recognition of cost reductions with integrated design, nor is there assessment of cost interactions amongst measures. This lack of rigor feeds the notion that high-performance buildings cost more, creating a barrier for design teams pursuing aggressive high-performance outcomes. This study proposes an alternative integrated methodology to arrive at a lower perceived incremental cost for improved energy performance. The methodology is based on the use of energy simulations as means towards integrated design and cost estimation. Various points along the spectrum of integration are identified and characterized by the amount of design effort invested, the scheduling of effort, and relative energy performance of the resultant design. It includes a study of the interactions between building system parameters as they relate to capital costs. Several cost interactions amongst energy measures are found to be significant.The value of this approach is demonstrated with alternatives in a case study that shows the differences between perceived costs for energy measures along various points on the integration spectrum. These alternatives show design tradeoffs and identify how decisions would have been different with a standard costing approach. Areas of further research to make the methodology more robust are identified. Policy measures to encourage the integrated approach and reduce the barriers towards improved energy performance are discussed.

  12. Methodology for the analysis of pollutant emissions from a city bus

    International Nuclear Information System (INIS)

    Armas, Octavio; Lapuerta, Magín; Mata, Carmen

    2012-01-01

    In this work a methodology is proposed for measurement and analysis of gaseous emissions and particle size distributions emitted by a diesel city bus during its typical operation under urban driving conditions. As test circuit, a passenger transportation line at a Spanish city was used. Different ways for data processing and representation were studied and, derived from this work, a new approach is proposed. The methodology was useful to detect the most important uncertainties arising during registration and processing of data derived from a measurement campaign devoted to determine the main pollutant emissions. A HORIBA OBS-1300 gas analyzer and a TSI engine exhaust particle spectrometer were used with 1 Hz frequency data recording. The methodology proposed allows for the comparison of results (in mean values) derived from the analysis of either complete cycles or specific categories (or sequences). The analysis by categories is demonstrated to be a robust and helpful tool to isolate the effect of the main vehicle parameters (relative fuel–air ratio and velocity) on pollutant emissions. It was shown that acceleration sequences have the highest contribution to the total emissions, whereas deceleration sequences have the least. (paper)

  13. Methodology for the analysis of pollutant emissions from a city bus

    Science.gov (United States)

    Armas, Octavio; Lapuerta, Magín; Mata, Carmen

    2012-04-01

    In this work a methodology is proposed for measurement and analysis of gaseous emissions and particle size distributions emitted by a diesel city bus during its typical operation under urban driving conditions. As test circuit, a passenger transportation line at a Spanish city was used. Different ways for data processing and representation were studied and, derived from this work, a new approach is proposed. The methodology was useful to detect the most important uncertainties arising during registration and processing of data derived from a measurement campaign devoted to determine the main pollutant emissions. A HORIBA OBS-1300 gas analyzer and a TSI engine exhaust particle spectrometer were used with 1 Hz frequency data recording. The methodology proposed allows for the comparison of results (in mean values) derived from the analysis of either complete cycles or specific categories (or sequences). The analysis by categories is demonstrated to be a robust and helpful tool to isolate the effect of the main vehicle parameters (relative fuel-air ratio and velocity) on pollutant emissions. It was shown that acceleration sequences have the highest contribution to the total emissions, whereas deceleration sequences have the least.

  14. Methodology update for determination of the erosion coefficient(Z

    Directory of Open Access Journals (Sweden)

    Tošić Radislav

    2012-01-01

    Full Text Available The research and mapping the intensity of mechanical water erosion that have begun with the empirical methodology of S. Gavrilović during the mid-twentieth century last, by various intensity, until the present time. A many decades work on the research of these issues pointed to some shortcomings of the existing methodology, and thus the need for its innovation. In this sense, R. Lazarević made certain adjustments of the empirical methodology of S. Gavrilović by changing the tables for determination of the coefficients Φ, X and Y, that is, the tables for determining the mean erosion coefficient (Z. The main objective of this paper is to update the existing methodology for determining the erosion coefficient (Z with the empirical methodology of S. Gavrilović and amendments made by R. Lazarević (1985, but also with better adjustments to the information technologies and the needs of modern society. The proposed procedure, that is, the model to determine the erosion coefficient (Z in this paper is the result of ten years of scientific research and project work in mapping the intensity of mechanical water erosion and its modeling using various models of erosion in the Republic of Srpska and Serbia. By analyzing the correlation of results obtained by regression models and results obtained during the mapping of erosion on the territory of the Republic of Srpska, a high degree of correlation (R² = 0.9963 was established, which is essentially a good assessment of the proposed models.

  15. Methodology to detect gaps in a soccer defence

    DEFF Research Database (Denmark)

    Knudsen, Nikolas Sten; Andersen, Thomas Bull

    2015-01-01

    The purpose of the present study was to create a methodology which can provide information about gaps in an opposing team’s defence. To illustrate the methodology, a defence was tracked during a game in the danish Superliga using ZXY radio tracking and analysed using the methodology. Results show...

  16. Multimodal hybrid reasoning methodology for personalized wellbeing services.

    Science.gov (United States)

    Ali, Rahman; Afzal, Muhammad; Hussain, Maqbool; Ali, Maqbool; Siddiqi, Muhammad Hameed; Lee, Sungyoung; Ho Kang, Byeong

    2016-02-01

    A wellness system provides wellbeing recommendations to support experts in promoting a healthier lifestyle and inducing individuals to adopt healthy habits. Adopting physical activity effectively promotes a healthier lifestyle. A physical activity recommendation system assists users to adopt daily routines to form a best practice of life by involving themselves in healthy physical activities. Traditional physical activity recommendation systems focus on general recommendations applicable to a community of users rather than specific individuals. These recommendations are general in nature and are fit for the community at a certain level, but they are not relevant to every individual based on specific requirements and personal interests. To cover this aspect, we propose a multimodal hybrid reasoning methodology (HRM) that generates personalized physical activity recommendations according to the user׳s specific needs and personal interests. The methodology integrates the rule-based reasoning (RBR), case-based reasoning (CBR), and preference-based reasoning (PBR) approaches in a linear combination that enables personalization of recommendations. RBR uses explicit knowledge rules from physical activity guidelines, CBR uses implicit knowledge from experts׳ past experiences, and PBR uses users׳ personal interests and preferences. To validate the methodology, a weight management scenario is considered and experimented with. The RBR part of the methodology generates goal, weight status, and plan recommendations, the CBR part suggests the top three relevant physical activities for executing the recommended plan, and the PBR part filters out irrelevant recommendations from the suggested ones using the user׳s personal preferences and interests. To evaluate the methodology, a baseline-RBR system is developed, which is improved first using ranged rules and ultimately using a hybrid-CBR. A comparison of the results of these systems shows that hybrid-CBR outperforms the

  17. A methodology proposed for a South African national wetland inventory

    CSIR Research Space (South Africa)

    Thompson, M

    2002-03-01

    Full Text Available improvements in accuracy provided by increasing spatial resolution, assuming that both sensor and land-cover spectral characteristics remain constant. Since the target mapping accuracies referred to in the ToR are given in terms of area-based parameters (i... 4.14 4.4 REFERENCES 4.16 APPENDIX 4.1: PROPOSED SYSTEM REQUIREMENTS TO HOST WEB-BASED IMS SITE 4.17 CHAPTER 5: COST BENEFIT ANALYSIS 5.1 Pilot Project for National Wetland inventory – 2002 ACKNOWLEDGEMENTS We would...

  18. Customer satisfaction surveys: Methodological recommendations for financial service providers

    Directory of Open Access Journals (Sweden)

    Đorđić Marko

    2010-01-01

    Full Text Available This methodological article investigates practical challenges that emerge when conducting customer satisfaction surveys (CSS for financial service providers such as banks, insurance or leasing companies, and so forth. It displays methodological recommendations in reference with: (a survey design, (b sampling, (c survey method, (d questionnaire design, and (e data acquisition. Article provides appropriate explanations that usage of: two-stage survey design, SRS method, large samples, and rigorous fieldwork preparation can enhance the overall quality of CSS in financial services. Proposed methodological recommendations can primarily be applied to the primary quantitative marketing research in retail financial services. However, majority of them can be successfully applied when conducting primary quantitative marketing research in corporate financial services as well. .

  19. Methodologic model to scheduling on service systems: a software engineering approach

    Directory of Open Access Journals (Sweden)

    Eduyn Ramiro Lopez-Santana

    2016-06-01

    Full Text Available This paper presents an approach of software engineering to a research proposal to make an Expert System to scheduling on service systems using methodologies and processes of software development. We use the adaptive software development as methodology for the software architecture based on the description as a software metaprocess that characterizes the research process. We make UML’s diagrams (Unified Modeling Language to provide a visual modeling that describes the research methodology in order to identify the actors, elements and interactions in the research process.

  20. A robust methodology for kinetic model parameter estimation for biocatalytic reactions

    DEFF Research Database (Denmark)

    Al-Haque, Naweed; Andrade Santacoloma, Paloma de Gracia; Lima Afonso Neto, Watson

    2012-01-01

    lead to globally optimized parameter values. In this article, a robust methodology to estimate parameters for biocatalytic reaction kinetic expressions is proposed. The methodology determines the parameters in a systematic manner by exploiting the best features of several of the current approaches...... parameters, which are strongly correlated with each other. State-of-the-art methodologies such as nonlinear regression (using progress curves) or graphical analysis (using initial rate data, for example, the Lineweaver-Burke plot, Hanes plot or Dixon plot) often incorporate errors in the estimates and rarely...

  1. Ancillary reactive power service allocation cost in deregulated markets: a methodology

    International Nuclear Information System (INIS)

    Hernandez, J. Horacio Tovar; Jimenez-Guzman, Miguel; Gutierrez-Alcaraz, Guillermo

    2005-01-01

    This paper presents a methodology to allocate reactive power costs in deregulated markets. Reactive power supply service is decomposed into voltage regulation and reactive power spinning reserve. The proposed methodology is based on sensitivities and the postage-stamp method in order to allocate the total costs service among all participants. With the purpose of achieving this goal, the system operator identifies voltage support and/or reactive power requirements, and looks out for suitable providers. One case study is presented here to illustrate the methodology over a simplified southeastern Mexican grid. (Author)

  2. Research on quality assurance classification methodology for domestic AP1000 nuclear power projects

    International Nuclear Information System (INIS)

    Bai Jinhua; Jiang Huijie; Li Jingyan

    2012-01-01

    To meet the quality assurance classification requirements of domestic nuclear safety codes and standards, this paper analyzes the quality assurance classification methodology of domestic AP1000 nuclear power projects at present, and proposes the quality assurance classification methodology for subsequent AP1000 nuclear power projects. (authors)

  3. Perception-oriented methodology for robust motion estimation design

    NARCIS (Netherlands)

    Heinrich, A.; Vleuten, van der R.J.; Haan, de G.

    2014-01-01

    Optimizing a motion estimator (ME) for picture rate conversion is challenging. This is because there are many types of MEs and, within each type, many parameters, which makes subjective assessment of all the alternatives impractical. To solve this problem, we propose an automatic design methodology

  4. An aspect-oriented methodology for designing secure applications

    NARCIS (Netherlands)

    Georg, Geri; Ray, Indrakshi; Anastasakis, Kyriakos; Bordbar, Behzad; Toahchoodee, Manachai; Houmb, S.H.

    We propose a methodology, based on aspect-oriented modeling (AOM), for incorporating security mechanisms in an application. The functionality of the application is described using the primary model and the attacks are specified using aspects. The attack aspect is composed with the primary model to

  5. A risk-based sensor placement methodology

    International Nuclear Information System (INIS)

    Lee, Ronald W.; Kulesz, James J.

    2008-01-01

    A risk-based sensor placement methodology is proposed to solve the problem of optimal location of sensors to protect population against the exposure to, and effects of, known and/or postulated chemical, biological, and/or radiological threats. Risk is calculated as a quantitative value representing population at risk from exposure at standard exposure levels. Historical meteorological data are used to characterize weather conditions as the frequency of wind speed and direction pairs. The meteorological data drive atmospheric transport and dispersion modeling of the threats, the results of which are used to calculate risk values. Sensor locations are determined via an iterative dynamic programming algorithm whereby threats detected by sensors placed in prior iterations are removed from consideration in subsequent iterations. In addition to the risk-based placement algorithm, the proposed methodology provides a quantification of the marginal utility of each additional sensor. This is the fraction of the total risk accounted for by placement of the sensor. Thus, the criteria for halting the iterative process can be the number of sensors available, a threshold marginal utility value, and/or a minimum cumulative utility achieved with all sensors

  6. A prioritization methodology to strategic planning process

    International Nuclear Information System (INIS)

    Rondinelli Junior, Francisco; Cherif, Hadj Slimane

    2009-01-01

    In the process of formulation of a Strategic Plan, there is always a step that deals with choices among different options and strategies. To do that a prioritization methodology has to be applied in order to achieve the higher needs identified along the analysis and evaluation of problems. To assign priorities within a set of needs/problems of a strategic nature and identified within various areas of activity or different sectors, it is proposed a methodology that envisage the use of specific attributes for which a graded scale of values is established for each need/problem, which, at the end of the process, allows a quantitative comparison among them. The methodology presented in this paper was developed following an approach that has been used in many areas over the last 20 years by various public and private institutions, and also by international organizations involved in promotion and development work. (author)

  7. Challenges and Opportunities for Harmonizing Research Methodology: Raw Accelerometry.

    Science.gov (United States)

    van Hees, Vincent T; Thaler-Kall, Kathrin; Wolf, Klaus-Hendrik; Brønd, Jan C; Bonomi, Alberto; Schulze, Mareike; Vigl, Matthäus; Morseth, Bente; Hopstock, Laila Arnesdatter; Gorzelniak, Lukas; Schulz, Holger; Brage, Søren; Horsch, Alexander

    2016-12-07

    Raw accelerometry is increasingly being used in physical activity research, but diversity in sensor design, attachment and signal processing challenges the comparability of research results. Therefore, efforts are needed to harmonize the methodology. In this article we reflect on how increased methodological harmonization may be achieved. The authors of this work convened for a two-day workshop (March 2014) themed on methodological harmonization of raw accelerometry. The discussions at the workshop were used as a basis for this review. Key stakeholders were identified as manufacturers, method developers, method users (application), publishers, and funders. To facilitate methodological harmonization in raw accelerometry the following action points were proposed: i) Manufacturers are encouraged to provide a detailed specification of their sensors, ii) Each fundamental step of algorithms for processing raw accelerometer data should be documented, and ideally also motivated, to facilitate interpretation and discussion, iii) Algorithm developers and method users should be open about uncertainties in the description of data and the uncertainty of the inference itself, iv) All new algorithms which are pitched as "ready for implementation" should be shared with the community to facilitate replication and ongoing evaluation by independent groups, and v) A dynamic interaction between method stakeholders should be encouraged to facilitate a well-informed harmonization process. The workshop led to the identification of a number of opportunities for harmonizing methodological practice. The discussion as well as the practical checklists proposed in this review should provide guidance for stakeholders on how to contribute to increased harmonization.

  8. Proposed Methodology for Assessing Cost of Synergies between Offshore Renewable Energy and Other Sea Uses

    DEFF Research Database (Denmark)

    Margheritini, Lucia; Hanssen, Jan Erik; O´Sullivan, Keith

    2015-01-01

    Dragon and wind turbine, W2Power) and another (non-energy) sea use. The methodology described in the present study has the value of presenting synergies under an economic prospective. Synergies can be found both in structural, installation and maintenance costs. The CAPEX and OPEX for the energy...

  9. A PROPOSED METHODOLOGY FOR ESTIMATING ECOREGIONAL VALUES FOR OUTDOOR RECREATION IN THE UNITED STATES

    OpenAIRE

    Bhat, Gajanan; Bergstrom, John C.; Bowker, James Michael; Cordell, H. Ken

    1996-01-01

    This paper provides a methodology for the estimation of recreational demand functions and values using an ecoregional approach. Ten ecoregions in the continental US were defined based on similarly functioning ecosystem characters. The individual travel cost method was employed to estimate the recreational demand functions for activities such as motorboating and waterskiing, developed and primative camping, coldwater fishing, sightseeing and pleasure driving, and big game hunting for each ecor...

  10. Design and analysis of sustainable computer mouse using design for disassembly methodology

    Science.gov (United States)

    Roni Sahroni, Taufik; Fitri Sukarman, Ahmad; Agung Mahardini, Karunia

    2017-12-01

    This paper presents the design and analysis of computer mouse using Design for Disassembly methodology. Basically, the existing computer mouse model consist a number of unnecessary part that cause the assembly and disassembly time in production. The objective of this project is to design a new computer mouse based on Design for Disassembly (DFD) methodology. The main methodology of this paper was proposed from sketch generation, concept selection, and concept scoring. Based on the design screening, design concept B was selected for further analysis. New design of computer mouse is proposed using fastening system. Furthermore, three materials of ABS, Polycarbonate, and PE high density were prepared to determine the environmental impact category. Sustainable analysis was conducted using software SolidWorks. As a result, PE High Density gives the lowers amount in the environmental category with great maximum stress value.

  11. Quantum mechanics and faster-than-light communication: methodological considerations

    International Nuclear Information System (INIS)

    Ghirardi, G.C.; Weber, T.

    1983-06-01

    A detailed quantum mechanical analysis of a recent proposal of faster than light communication through wave packet reduction is performed. The discussion allows us to focus on some methodological problems about critical investigations in physical theories. (author)

  12. Development of a novel set of criteria to select methodology for designing product service systems

    Directory of Open Access Journals (Sweden)

    Tuananh Tran

    2016-04-01

    Full Text Available This paper proposes eight groups of twenty nine scoring criteria that can help designers and practitioners to compare and select an appropriate methodology for a certain problem in designing product service system (PSS. PSS has been researched for more than a decade and is now becoming more and more popular in academia as well as industry. Despite that fact, the adoption of PSS is still limited for its potential. One of the main reasons is that designing PSS itself is a challenge. Designers and developers face difficulties in choosing appropriate PSS design methodologies for their projects so that they can design effective PSS offerings. By proposing eight groups of twenty nine scoring criteria, this paper enables a “step by step” process to identify the most appropriate design methodology for a company’s PSS problem. An example is also introduced to illustrate the use of the proposed scoring criteria and provide a clear picture of how different design methodologies can be utilized at their best in terms of application.

  13. The study of evaluation methodology of the aging and degradation researches

    International Nuclear Information System (INIS)

    Cho, C. J.; Park, Z. H.; Jeong, I. S.

    2001-01-01

    To judge the usefulness of aging related researches like PLIM (Plant lifetime Management) and aging related degradation, et. al. in PSR(Periodic Safety Review), the evaluation methodology of the R and D have been proposed up to now are reviewed. The infometric methodology is considered to be the optimum method for the evaluation of the nuclear related researches. And finally, to increase the objectiveness and reliability of the infometric methodology in the aging and degradation researches, the indexes of safety, technology and economics are introduced. From this study, the infometric methodology has the advantage of the actual engineering evaluation in the nuclear related researches with other methodologies, but for the further research, the effective construction of DB and survey of various statistics in the technical reports and papers are needed

  14. Changing methodologies in TESOL

    CERN Document Server

    Spiro, Jane

    2013-01-01

    Covering core topics from vocabulary and grammar to teaching, writing speaking and listening, this textbook shows you how to link research to practice in TESOL methodology. It emphasises how current understandings have impacted on the language classroom worldwide and investigates the meaning of 'methods' and 'methodology' and the importance of these for the teacher: as well as the underlying assumptions and beliefs teachers bring to bear in their practice. By introducing you to language teaching approaches, you will explore the way these are influenced by developments in our understanding of l

  15. A methodology for overall consequence modeling in chemical industry

    International Nuclear Information System (INIS)

    Arunraj, N.S.; Maiti, J.

    2009-01-01

    Risk assessment in chemical process industry is a very important issue for safeguarding human and the ecosystem from damages caused to them. Consequence assessment is an integral part of risk assessment. However, the commonly used consequence estimation methods involve time-consuming complex mathematical models and simple assimilation of losses without considering all the consequence factors. This lead to the deterioration of quality of estimated risk value. So, the consequence modeling has to be performed in detail considering all major losses with optimal time to improve the decisive value of risk. The losses can be broadly categorized into production loss, assets loss, human health and safety loss, and environment loss. In this paper, a conceptual framework is developed to assess the overall consequence considering all the important components of major losses. Secondly, a methodology is developed for the calculation of all the major losses, which are normalized to yield the overall consequence. Finally, as an illustration, the proposed methodology is applied to a case study plant involving benzene extraction. The case study result using the proposed consequence assessment scheme is compared with that from the existing methodologies.

  16. A proposed residual stress model for oblique turning

    International Nuclear Information System (INIS)

    Elkhabeery, M. M.

    2001-01-01

    A proposed mathematical model is presented for predicting the residual stresses caused by turning. Effects of change in tool free length, cutting speed, feed rate, and the tensile strength of work piece material on the maximum residual stress are investigated. The residual stress distribution in the surface region due to turning under unlubricated condition is determined using a deflection etching technique. To reduce the number of experiments required and build the mathematical model for these variables, Response Surface Methodology (RSM) is used. In addition, variance analysis and an experimental check are conducted to determine the prominent parameters and the adequacy of the model. The results show that the tensile stress of the work piece material, cutting speed, and feed rate have significant effects on the maximum residual stresses. The proposed model, that offering good correlation between the experimental and predicted results, is useful in selecting suitable cutting parameters for the machining of different materials. (author)

  17. Methodology for processing pressure traces used as inputs for combustion analyses in diesel engines

    International Nuclear Information System (INIS)

    Rašić, Davor; Vihar, Rok; Baškovič, Urban Žvar; Katrašnik, Tomaž

    2017-01-01

    This study proposes a novel methodology for designing an optimum equiripple finite impulse response (FIR) filter for processing in-cylinder pressure traces of a diesel internal combustion engine, which serve as inputs for high-precision combustion analyses. The proposed automated workflow is based on an innovative approach of determining the transition band frequencies and optimum filter order. The methodology is based on discrete Fourier transform analysis, which is the first step to estimate the location of the pass-band and stop-band frequencies. The second step uses short-time Fourier transform analysis to refine the estimated aforementioned frequencies. These pass-band and stop-band frequencies are further used to determine the most appropriate FIR filter order. The most widely used existing methods for estimating the FIR filter order are not effective in suppressing the oscillations in the rate- of-heat-release (ROHR) trace, thus hindering the accuracy of combustion analyses. To address this problem, an innovative method for determining the order of an FIR filter is proposed in this study. This method is based on the minimization of the integral of normalized signal-to-noise differences between the stop-band frequency and the Nyquist frequency. Developed filters were validated using spectral analysis and calculation of the ROHR. The validation results showed that the filters designed using the proposed innovative method were superior compared with those using the existing methods for all analyzed cases. Highlights • Pressure traces of a diesel engine were processed by finite impulse response (FIR) filters with different orders • Transition band frequencies were determined with an innovative method based on discrete Fourier transform and short-time Fourier transform • Spectral analyses showed deficiencies of existing methods in determining the FIR filter order • A new method of determining the FIR filter order for processing pressure traces was

  18. Applicability of the Directed Graph Methodology

    Energy Technology Data Exchange (ETDEWEB)

    Huszti, Jozsef [Institute of Isotope of the Hungarian Academy of Sciences, Budapest (Hungary); Nemeth, Andras [ESRI Hungary, Budapest (Hungary); Vincze, Arpad [Hungarian Atomic Energy Authority, Budapest (Hungary)

    2012-06-15

    Possible methods to construct, visualize and analyse the 'map' of the State's nuclear infrastructure based on different directed graph approaches are proposed. The transportation and the flow network models are described in detail. The use of the possible evaluation methodologies and the use of available software tools to construct and maintain the nuclear 'map' using pre-defined standard building blocks (nuclear facilities) are introduced and discussed.

  19. Unification of the methodology of competitiveness evaluation

    Directory of Open Access Journals (Sweden)

    Ivanova Marina

    2016-05-01

    Full Text Available The purpose of the study is the comparison of the modern methods of competitiveness evaluation and testing the results in practice at a production plant in order to unify the methodology. Analysis of the publications shows that the existing diversity in methods of the competitiveness evaluation complicates the choice of a method and interpretation of the results, which confirms the need to classify and unify the methods available today. The authors suggest that the standardized method of competitiveness evaluation should combine matrix and graphical methods. In our study, we have shown that SWOT-analysis should be carried out in two stages: firstly, it is necessary to determine the strengths and weaknesses of the company, taking into account the following factors: marketing, production, economic and financial situation, technology, the administration and personnel; secondly, it is essential to assess the opportunities and threats with the allowance for the political, legal, and economic situation, the impact of market as well as social, cultural and natural environmental factors. The proposed methodology of competitiveness evaluation has been tested at the industrial enterprise "Olvita ltd", which is dynamically developing and successfully operates on the food market of Ukraine; it specializes in processing, logistics and distribution of fresh and frozen vegetables, fruits and berries, as well as ready-to cook meat products. The results have shown that the competitiveness evaluation remains a pressing issue that requires simple and fairly demonstrative methods, one of which is a method that combines both graphical and matrix approaches. The advantage of the proposed method is its sufficiently high visualizations and record of personal approaches in evaluating the scores for strengths and weaknesses as well as opportunities and threats. In the future, the authors are planning to examine and systemize the indicators used in the competitiveness

  20. Model identification methodology for fluid-based inerters

    Science.gov (United States)

    Liu, Xiaofu; Jiang, Jason Zheng; Titurus, Branislav; Harrison, Andrew

    2018-06-01

    Inerter is the mechanical dual of the capacitor via the force-current analogy. It has the property that the force across the terminals is proportional to their relative acceleration. Compared with flywheel-based inerters, fluid-based forms have advantages of improved durability, inherent damping and simplicity of design. In order to improve the understanding of the physical behaviour of this fluid-based device, especially caused by the hydraulic resistance and inertial effects in the external tube, this work proposes a comprehensive model identification methodology. Firstly, a modelling procedure is established, which allows the topological arrangement of the mechanical networks to be obtained by mapping the damping, inertance and stiffness effects directly to their respective hydraulic counterparts. Secondly, an experimental sequence is followed, which separates the identification of friction, stiffness and various damping effects. Furthermore, an experimental set-up is introduced, where two pressure gauges are used to accurately measure the pressure drop across the external tube. The theoretical models with improved confidence are obtained using the proposed methodology for a helical-tube fluid inerter prototype. The sources of remaining discrepancies are further analysed.

  1. Methodology used in IRSN nuclear accident cost estimates in France

    International Nuclear Information System (INIS)

    2015-01-01

    This report describes the methodology used by IRSN to estimate the cost of potential nuclear accidents in France. It concerns possible accidents involving pressurized water reactors leading to radioactive releases in the environment. These accidents have been grouped in two accident families called: severe accidents and major accidents. Two model scenarios have been selected to represent each of these families. The report discusses the general methodology of nuclear accident cost estimation. The crucial point is that all cost should be considered: if not, the cost is underestimated which can lead to negative consequences for the value attributed to safety and for crisis preparation. As a result, the overall cost comprises many components: the most well-known is offsite radiological costs, but there are many others. The proposed estimates have thus required using a diversity of methods which are described in this report. Figures are presented at the end of this report. Among other things, they show that purely radiological costs only represent a non-dominant part of foreseeable economic consequences. (authors)

  2. HIV / AIDS prevalence testing - merits, methodology and outcomes ...

    African Journals Online (AJOL)

    HIV / AIDS prevalence testing - merits, methodology and outcomes of a survey conducted at a large mining organisation in South Africa. ... These baseline prevalence data also provide an opportunity for monitoring of proposed interventions using cross-sectional surveys at designated intervals in the future. South African ...

  3. Methodological proposal for validation of the disinfecting efficacy of an automated flexible endoscope reprocessor

    OpenAIRE

    Graziano, Kazuko Uchikawa; Pereira, Marta Elisa Auler; Koda, Elaine

    2016-01-01

    ABSTRACT Objective: to elaborate and apply a method to assess the efficacy of automated flexible endoscope reprocessors at a time when there is not an official method or trained laboratories to comply with the requirements described in specific standards for this type of health product in Brazil. Method: the present methodological study was developed based on the following theoretical references: International Organization for Standardization (ISO) standard ISO 15883-4/2008 and Brazilian ...

  4. The kidney allocation score: methodological problems, moral concerns and unintended consequences.

    Science.gov (United States)

    Hippen, B

    2009-07-01

    The growing disparity between the demand for and supply of kidneys for transplantation has generated interest in alternative systems of allocating kidneys from deceased donors. This personal viewpoint focuses attention on the Kidney Allocation Score (KAS) proposal promulgated by the UNOS/OPTN Kidney Committee. I identify several methodological and moral flaws in the proposed system, concluding that any iteration of the KAS proposal should be met with more skepticism than sanguinity.

  5. A new methodology to study customer electrocardiogram using RFM analysis and clustering

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Gholamian

    2011-04-01

    Full Text Available One of the primary issues on marketing planning is to know the customer's behavioral trends. A customer's purchasing interest may fluctuate for different reasons and it is important to find the declining or increasing trends whenever they happen. It is important to study these fluctuations to improve customer relationships. There are different methods to increase the customer's willingness such as planning good promotions, an increase on advertisement, etc. This paper proposes a new methodology to measure customer's behavioral trends called customer electrocardiogram. The proposed model of this paper uses K-means clustering method with RFM analysis to study customer's fluctuations over different time frames. We also apply the proposed electrocardiogram methodology for a real-world case study of food industry and the results are discussed in details.

  6. A hierarchical modeling methodology for the definition and selection of requirements

    Science.gov (United States)

    Dufresne, Stephane

    This dissertation describes the development of a requirements analysis methodology that takes into account the concept of operations and the hierarchical decomposition of aerospace systems. At the core of the methodology, the Analytic Network Process (ANP) is used to ensure the traceability between the qualitative and quantitative information present in the hierarchical model. The proposed methodology is implemented to the requirements definition of a hurricane tracker Unmanned Aerial Vehicle. Three research objectives are identified in this work; (1) improve the requirements mapping process by matching the stakeholder expectations with the concept of operations, systems and available resources; (2) reduce the epistemic uncertainty surrounding the requirements and requirements mapping; and (3) improve the requirements down-selection process by taking into account the level of importance of the criteria and the available resources. Several challenges are associated with the identification and definition of requirements. The complexity of the system implies that a large number of requirements are needed to define the systems. These requirements are defined early in the conceptual design, where the level of knowledge is relatively low and the level of uncertainty is large. The proposed methodology intends to increase the level of knowledge and reduce the level of uncertainty by guiding the design team through a structured process. To address these challenges, a new methodology is created to flow-down the requirements from the stakeholder expectations to the systems alternatives. A taxonomy of requirements is created to classify the information gathered during the problem definition. Subsequently, the operational and systems functions and measures of effectiveness are integrated to a hierarchical model to allow the traceability of the information. Monte Carlo methods are used to evaluate the variations of the hierarchical model elements and consequently reduce the

  7. A methodology for the stochastic generation of hourly synthetic direct normal irradiation time series

    Science.gov (United States)

    Larrañeta, M.; Moreno-Tejera, S.; Lillo-Bravo, I.; Silva-Pérez, M. A.

    2018-02-01

    Many of the available solar radiation databases only provide global horizontal irradiance (GHI) while there is a growing need of extensive databases of direct normal radiation (DNI) mainly for the development of concentrated solar power and concentrated photovoltaic technologies. In the present work, we propose a methodology for the generation of synthetic DNI hourly data from the hourly average GHI values by dividing the irradiance into a deterministic and stochastic component intending to emulate the dynamics of the solar radiation. The deterministic component is modeled through a simple classical model. The stochastic component is fitted to measured data in order to maintain the consistency of the synthetic data with the state of the sky, generating statistically significant DNI data with a cumulative frequency distribution very similar to the measured data. The adaptation and application of the model to the location of Seville shows significant improvements in terms of frequency distribution over the classical models. The proposed methodology applied to other locations with different climatological characteristics better results than the classical models in terms of frequency distribution reaching a reduction of the 50% in the Finkelstein-Schafer (FS) and Kolmogorov-Smirnov test integral (KSI) statistics.

  8. A Duration Prediction Using a Material-Based Progress Management Methodology for Construction Operation Plans

    Directory of Open Access Journals (Sweden)

    Yongho Ko

    2017-04-01

    Full Text Available Precise and accurate prediction models for duration and cost enable contractors to improve their decision making for effective resource management in terms of sustainability in construction. Previous studies have been limited to cost-based estimations, but this study focuses on a material-based progress management method. Cost-based estimations typically used in construction, such as the earned value method, rely on comparing the planned budget with the actual cost. However, accurately planning budgets requires analysis of many factors, such as the financial status of the sectors involved. Furthermore, there is a higher possibility of changes in the budget than in the total amount of material used during construction, which is deduced from the quantity take-off from drawings and specifications. Accordingly, this study proposes a material-based progress management methodology, which was developed using different predictive analysis models (regression, neural network, and auto-regressive moving average as well as datasets on material and labor, which can be extracted from daily work reports from contractors. A case study on actual datasets was conducted, and the results show that the proposed methodology can be efficiently used for progress management in construction.

  9. Evaluation of the quality of the environmental participation: A methodological proposal

    International Nuclear Information System (INIS)

    Zuluaga M, Clara; Carmona M, Sergio Ivan

    2004-01-01

    The advances in the way to sustainability are inseparable to the achievement in the citizenship construction, because the citizen condition is only realized in the proactive compromise with the territorial themes, the environmental management effectiveness requests high quality in their participative processes; therefore, pertinent tools are required to know and to appraise these processes. The goodness of these tools proceeds of their functionality in the knowledge of the participation quality purpose, that to environmental participative processes, is conceived in terms of legitimacy, representatively, democratization of the environmental knowledge, social cohesion, capacity of interlocution, and incidence in the decision making, with the coherent conceptual structure of these facets shapes the theoretical-methodological scaffolding that permits their joining in attributes, variables and indicators relatives to the characteristics of the participative planning processes, proper to account of the environmental participation quality. With the appraisal of the environmental participation quality in planning processes, supported in the integration of the constitutive attributes, is possible to obtain the index that facilitates their diagnostic and improvement

  10. A Generalizable Methodology for Quantifying User Satisfaction

    Science.gov (United States)

    Huang, Te-Yuan; Chen, Kuan-Ta; Huang, Polly; Lei, Chin-Laung

    Quantifying user satisfaction is essential, because the results can help service providers deliver better services. In this work, we propose a generalizable methodology, based on survival analysis, to quantify user satisfaction in terms of session times, i. e., the length of time users stay with an application. Unlike subjective human surveys, our methodology is based solely on passive measurement, which is more cost-efficient and better able to capture subconscious reactions. Furthermore, by using session times, rather than a specific performance indicator, such as the level of distortion of voice signals, the effects of other factors like loudness and sidetone, can also be captured by the developed models. Like survival analysis, our methodology is characterized by low complexity and a simple model-developing process. The feasibility of our methodology is demonstrated through case studies of ShenZhou Online, a commercial MMORPG in Taiwan, and the most prevalent VoIP application in the world, namely Skype. Through the model development process, we can also identify the most significant performance factors and their impacts on user satisfaction and discuss how they can be exploited to improve user experience and optimize resource allocation.

  11. Framework of Comprehensive Proliferation Resistance Evaluation Methodology

    International Nuclear Information System (INIS)

    Kim, Min Su; Jo, Seong Youn; Kim, Min Soo; Kim, Jae San; Lee, Hyun Kyung

    2007-01-01

    Civilian nuclear programs can be used as a pretext to acquire technologies, materials, equipment for military weapon programs. Consequently, international society has a strong incentive to develop a nuclear system more proliferation resistant to assure that the civilian nuclear energy system is an unattractive and least desirable route for diversion of weapon usable material. The First step developing a more proliferation resistant nuclear energy system is to develop a systematic and standardized evaluation methodology to ensure that any future nuclear energy system satisfies the proliferation resistance goals. Many attempts to develop systematic evaluation methodology have been proposed and many systems for assessing proliferation resistance have been previously studied. However, a comprehensive proliferation resistance evaluation can not be achieved by simply applying one method since complicated proliferation resistance characteristics, including inherent features and extrinsic features, should be completely evaluated. Therefore, it is necessary to develop one incorporated evaluation methodology to make up for weak points of each evaluation method. The objective of this study is to provide a framework of comprehensive proliferation resistance evaluation methodology by incorporating two generally used evaluation methods, attribute and scenario analysis

  12. Development of a system dynamics model based on Six Sigma methodology

    Directory of Open Access Journals (Sweden)

    José Jovani Cardiel Ortega

    2017-01-01

    Full Text Available A dynamic model to analyze the complexity associated with the manufacturing systems and to improve the performance of the process through the Six Sigma philosophy is proposed. The research focuses on the implementation of the system dynamics tool to comply with each of the phases of the DMAIC methodology. In the first phase, define, the problem is articulated, collecting data, selecting the variables, and representing them in a mental map that helps build the dynamic hypothesis. In the second phase, measure, model is formulated, equations are developed, and Forrester diagram is developed to carry out the simulation. In the third phase, analyze, the simulation results are studied. For the fourth phase, improving, the model is validated through a sensitivity analysis. Finally, in control phase, operation policies are proposed. This paper presents the development of a dynamic model of the system of knitted textile production knitted developed; the implementation was done in a textile company in southern Guanajuato. The results show an improvement in the process performance by increasing the level of sigma allowing the validation of the proposed approach.

  13. Seismic qualification of existing nuclear installations in India - a proposal

    International Nuclear Information System (INIS)

    Basu, P.C.

    2001-01-01

    In India, the work toward seismic qualification of existing nuclear facilities has been started. Preliminary work is being undertaken with respect to identifying the facilities which would be taken up for seismic qualification, approach and methodology for re-evaluation for seismic safety, acceptance criteria, etc. Work has also been started for framing up the criteria and methodology of the seismic qualification of these facilities. Present paper contains the proposal in this respect. This proposal is on similar lines of the present practice of seismic qualification of NPP, as summarized in the Appendix, but has been modified to suit the special requirements of Indian nuclear installations. (author)

  14. A Simulation-Based Soft Error Estimation Methodology for Computer Systems

    OpenAIRE

    Sugihara, Makoto; Ishihara, Tohru; Hashimoto, Koji; Muroyama, Masanori

    2006-01-01

    This paper proposes a simulation-based soft error estimation methodology for computer systems. Accumulating soft error rates (SERs) of all memories in a computer system results in pessimistic soft error estimation. This is because memory cells are used spatially and temporally and not all soft errors in them make the computer system faulty. Our soft-error estimation methodology considers the locations and the timings of soft errors occurring at every level of memory hierarchy and estimates th...

  15. Nuclear power plant system environmental design and decision methodology

    International Nuclear Information System (INIS)

    Zendehrouh, Z.; Shinozuka, M.; Schauer, F.P.

    1975-01-01

    The methodology described is concerned with a system reliability analysis by which the correlation among the level of design for the environmental and natural phenomena (earthquake, flood, tornado, etc.), reasonable practical measure of safety (such as conventional safety factor), and damage (radioactivity release) probability are established. In fact, the methodology indicates how the risk of environmental and natural hazard is combined with a specific design in order to evaluate damage probability associated with the design. This leads to the optimum design decision when combined further with the cost considerations involving the radioactivity release. This fundamental approach is essential in the design of nuclear plant structures, because, unlike the convential structures, the architectural considerations and structural analysis requirements alone cannot, by themselves, result in a balanced design in the framework of social requirements. The proposed methodology incorporates the different methods of environmental load determinations with their respective probabilistic formulations as well as detailed and advanced multi-discipline (structural, mechanical, soil, nuclear physics, biology, etc.) theoretical and empirical analysis including the effect of probabilistic nature of design variables, to establish a sound and reasonable design decision model for nuclear power plants. The information required for the analysis is also described and the areas for which further research is desirable are pointed out. Furthermore, the proposed methodology can very well be utilized to determine the requirements of standardized plants to facilitate the speed of their design and review process

  16. Systemic design methodologies for electrical energy systems analysis, synthesis and management

    CERN Document Server

    Roboam, Xavier

    2012-01-01

    This book proposes systemic design methodologies applied to electrical energy systems, in particular analysis and system management, modeling and sizing tools. It includes 8 chapters: after an introduction to the systemic approach (history, basics & fundamental issues, index terms) for designing energy systems, this book presents two different graphical formalisms especially dedicated to multidisciplinary devices modeling, synthesis and analysis: Bond Graph and COG/EMR. Other systemic analysis approaches for quality and stability of systems, as well as for safety and robustness analysis tools are also proposed. One chapter is dedicated to energy management and another is focused on Monte Carlo algorithms for electrical systems and networks sizing. The aim of this book is to summarize design methodologies based in particular on a systemic viewpoint, by considering the system as a whole. These methods and tools are proposed by the most important French research laboratories, which have many scientific partn...

  17. Increasing the UAV data value by an OBIA methodology

    Science.gov (United States)

    García-Pedrero, Angel; Lillo-Saavedra, Mario; Rodriguez-Esparragon, Dionisio; Rodriguez-Gonzalez, Alejandro; Gonzalo-Martin, Consuelo

    2017-10-01

    Recently, there has been a noteworthy increment of using images registered by unmanned aerial vehicles (UAV) in different remote sensing applications. Sensors boarded on UAVs has lower operational costs and complexity than other remote sensing platforms, quicker turnaround times as well as higher spatial resolution. Concerning this last aspect, particular attention has to be paid on the limitations of classical algorithms based on pixels when they are applied to high resolution images. The objective of this study is to investigate the capability of an OBIA methodology developed for the automatic generation of a digital terrain model of an agricultural area from Digital Elevation Model (DEM) and multispectral images registered by a Parrot Sequoia multispectral sensor board on a eBee SQ agricultural drone. The proposed methodology uses a superpixel approach for obtaining context and elevation information used for merging superpixels and at the same time eliminating objects such as trees in order to generate a Digital Terrain Model (DTM) of the analyzed area. Obtained results show the potential of the approach, in terms of accuracy, when it is compared with a DTM generated by manually eliminating objects.

  18. Methodology for estimating human perception to tremors in high-rise buildings

    Science.gov (United States)

    Du, Wenqi; Goh, Key Seng; Pan, Tso-Chien

    2017-07-01

    Human perception to tremors during earthquakes in high-rise buildings is usually associated with psychological discomfort such as fear and anxiety. This paper presents a methodology for estimating the level of perception to tremors for occupants living in high-rise buildings subjected to ground motion excitations. Unlike other approaches based on empirical or historical data, the proposed methodology performs a regression analysis using the analytical results of two generic models of 15 and 30 stories. The recorded ground motions in Singapore are collected and modified for structural response analyses. Simple predictive models are then developed to estimate the perception level to tremors based on a proposed ground motion intensity parameter—the average response spectrum intensity in the period range between 0.1 and 2.0 s. These models can be used to predict the percentage of occupants in high-rise buildings who may perceive the tremors at a given ground motion intensity. Furthermore, the models are validated with two recent tremor events reportedly felt in Singapore. It is found that the estimated results match reasonably well with the reports in the local newspapers and from the authorities. The proposed methodology is applicable to urban regions where people living in high-rise buildings might feel tremors during earthquakes.

  19. FIELD CLASS AS PEDAGOGICAL PRACTICE IN TEACHING OF GEOGRAPHY FOR FUNDAMENTAL EDUCATION: proposed methodology and case study

    Directory of Open Access Journals (Sweden)

    Ricardo Michael Pinheiro Silveira

    2014-01-01

    Full Text Available In the context of significant change and transformation of society in recent decades at the global level, geography had to rethink its role in the condition of traditional discipline of the school curriculum. With the need for new teaching practices that apply to the daily lives of students, field classes emerge as an important activity to support the teaching of geography. At this perspective, based on recent results of the Project Expedições Geográficas (UFPR/Licenciar, this paper proposes a methodology for planning and organizing field classes at the local scale, based on three points: the pre-field (planning and organization stage, the field (realization of the activity and post-field (evaluation and discussion stage, which resulted in the case study with students from 6th grade (elementary school of Aline Picheth School, located in Curitiba/PR. Altogether six field classes were performed, with themes proposed initially, with emphasis on orientation/location, geotechnologies insertion and interpretation and recognition of landscape elements. The recorded proposals by the students during the activity denoted the fast assimilation of the contents against the reality experienced in loco, presenting satisfactory results and demonstrating the potential of the field class as an auxiliary teaching-pedagogical resource. RESUMO: No contexto das significativas mudanças e transformações da sociedade nas últimas décadas em nível global, a geografia teve de repensar sua função na condição de tradicional disciplina do currículo escolar. Com a necessidade de novas práticas pedagógicas que se apliquem ao cotidiano dos alunos, as aulas de campo surgem como importante atividade de apoio ao ensino de geografia. Nessa perspectiva, com base nos resultados recentes do Projeto Expedições Geográficas (UFPR/Licenciar, o presente trabalho propõe uma metodologia para o planejamento e organização de aulas de campo em escala local, pautada em tr

  20. A design and experimental verification methodology for an energy harvester skin structure

    Science.gov (United States)

    Lee, Soobum; Youn, Byeng D.

    2011-05-01

    This paper presents a design and experimental verification methodology for energy harvesting (EH) skin, which opens up a practical and compact piezoelectric energy harvesting concept. In the past, EH research has primarily focused on the design improvement of a cantilever-type EH device. However, such EH devices require additional space for proof mass and fixture and sometimes result in significant energy loss as the clamping condition becomes loose. Unlike the cantilever-type device, the proposed design is simply implemented by laminating a thin piezoelectric patch onto a vibrating structure. The design methodology proposed, which determines a highly efficient piezoelectric material distribution, is composed of two tasks: (i) topology optimization and (ii) shape optimization of the EH material. An outdoor condensing unit is chosen as a case study among many engineered systems with harmonic vibrating configuration. The proposed design methodology determined an optimal PZT material configuration on the outdoor unit skin structure. The designed EH skin was carefully prototyped to demonstrate that it can generate power up to 3.7 mW, which is sustainable for operating wireless sensor units for structural health monitoring and/or building automation.

  1. A design and experimental verification methodology for an energy harvester skin structure

    International Nuclear Information System (INIS)

    Lee, Soobum; Youn, Byeng D

    2011-01-01

    This paper presents a design and experimental verification methodology for energy harvesting (EH) skin, which opens up a practical and compact piezoelectric energy harvesting concept. In the past, EH research has primarily focused on the design improvement of a cantilever-type EH device. However, such EH devices require additional space for proof mass and fixture and sometimes result in significant energy loss as the clamping condition becomes loose. Unlike the cantilever-type device, the proposed design is simply implemented by laminating a thin piezoelectric patch onto a vibrating structure. The design methodology proposed, which determines a highly efficient piezoelectric material distribution, is composed of two tasks: (i) topology optimization and (ii) shape optimization of the EH material. An outdoor condensing unit is chosen as a case study among many engineered systems with harmonic vibrating configuration. The proposed design methodology determined an optimal PZT material configuration on the outdoor unit skin structure. The designed EH skin was carefully prototyped to demonstrate that it can generate power up to 3.7 mW, which is sustainable for operating wireless sensor units for structural health monitoring and/or building automation. (technical note)

  2. Talk Show Science.

    Science.gov (United States)

    Moore, Mitzi Ruth

    1992-01-01

    Proposes having students perform skits in which they play the roles of the science concepts they are trying to understand. Provides the dialog for a skit in which hot and cold gas molecules are interviewed on a talk show to study how these properties affect wind, rain, and other weather phenomena. (MDH)

  3. A novelty detection diagnostic methodology for gearboxes operating under fluctuating operating conditions using probabilistic techniques

    Science.gov (United States)

    Schmidt, S.; Heyns, P. S.; de Villiers, J. P.

    2018-02-01

    In this paper, a fault diagnostic methodology is developed which is able to detect, locate and trend gear faults under fluctuating operating conditions when only vibration data from a single transducer, measured on a healthy gearbox are available. A two-phase feature extraction and modelling process is proposed to infer the operating condition and based on the operating condition, to detect changes in the machine condition. Information from optimised machine and operating condition hidden Markov models are statistically combined to generate a discrepancy signal which is post-processed to infer the condition of the gearbox. The discrepancy signal is processed and combined with statistical methods for automatic fault detection and localisation and to perform fault trending over time. The proposed methodology is validated on experimental data and a tacholess order tracking methodology is used to enhance the cost-effectiveness of the diagnostic methodology.

  4. Structured Intuition: A Methodology to Analyse Entity Authentication

    DEFF Research Database (Denmark)

    Ahmed, Naveed

    and the level of abstraction used in the analysis. Thus, the goal of developing a high level methodology that can be used with different notions of security, authentication, and abstraction is worth considering. In this thesis, we propose a new methodology, called the structured intuition (SI), which addresses...... in our methodology, which is called canonicity, which is a weaker form of message authenticity. As compared to many contemporary analysis techniques, an SI based analysis provides detailed results regarding the design rationales and entity authentication goals of a protocol....... consequences for the security of the system, e.g., private information of legitimate parties may be leaked or the security policy of a trusted system may be violated. At a corporate level, such a failure of authentication may result in loss of proprietary technology or customers' credit card information...

  5. Proposal of safety design methodologies for an HTGR-hydrogen production system. Mainly on countermeasures against fire and explosion

    International Nuclear Information System (INIS)

    Nishihara, Tetsuo; Hada, Kazuhiko; Shiozawa, Syusaku

    1996-03-01

    Among key issues of the safety design for an HTGR-hydrogen production system is to ensure the safety of the nuclear reactor against fire and explosion accidents in the hydrogen production plant. The fire and explosion accidents in the hydrogen production plant are categorized into the following two cases; Accidents inside the reactor building (R/B) and accidents outside the R/B. Against accidents inside the R/B, the proposed safety design concept is to prevent the occurrence of the accidents based on the defence in depth concept. The piping system and/or heat transfer tubes which have the potential possibility of combustible materials ingress into the R/B due to the failure are designed at the highest aseismic level to prevent the failure against severe earthquake. Even if the failure occurs, the piping trench and related compartments are fulfilled with nitrogen so as to prevent the occurrence of accidents. The proposed safety design concept for the accidents outside the R/B is the mitigation of effects of accidents. Proposed countermeasures is to take the safe distance between the hydrogen production plant and the items important to safety in the nuclear plant. We showed that the anticipated accidents to estimate the safe distance are large scale pool burning, fireball, pressure vessel burst and vapor cloud explosion. Especially, new estimating concept to establish the safe distance is proposed for the vapor cloud explosion. To reduce the safe distance, we proposed the underground non-pressurized storage tank and ventilation system for the storage of large amount of combustible liquid. (author). 61 refs

  6. Novel methodology for pharmaceutical expenditure forecast

    OpenAIRE

    Vataire, Anne-Lise; Cetinsoy, Laurent; Aball?a, Samuel; R?muzat, C?cile; Urbinati, Duccio; Kornfeld, ?sa; Mzoughi, Olfa; Toumi, Mondher

    2014-01-01

    Background and objective: The value appreciation of new drugs across countries today features a disruption that is making the historical data that are used for forecasting pharmaceutical expenditure poorly reliable. Forecasting methods rarely addressed uncertainty. The objective of this project was to propose a methodology to perform pharmaceutical expenditure forecasting that integrates expected policy changes and uncertainty (developed for the European Commission as the ‘EU Pharmaceutical e...

  7. Methodological approach to strategic performance optimization

    OpenAIRE

    Hell, Marko; Vidačić, Stjepan; Garača, Željko

    2009-01-01

    This paper presents a matrix approach to the measuring and optimization of organizational strategic performance. The proposed model is based on the matrix presentation of strategic performance, which follows the theoretical notions of the balanced scorecard (BSC) and strategy map methodologies, initially developed by Kaplan and Norton. Development of a quantitative record of strategic objectives provides an arena for the application of linear programming (LP), which is a mathematical tech...

  8. Methodology for corrosion evaluation in HAZ of 11%-Cr ferritic stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    Nascimento, Carmem C. F.; Rodrigues, Samul F. [Dept. of Mechanic and MaterialsFederal Institute of Education, Science and Technology of Maranhao, Sao Luis (Brazil); De Morais, Vinicius M.; Vilarinho, Louriel O. [Dept. of Mechanic Engineering, Federal University of Uberlandia, Uberlandia (Brazil)

    2016-08-15

    A novel methodology is proposed for corrosion-wear measurement in the Heat affected zone (HAZ) of 11%-Cr ferritic stainless steel. Weld beads with different stress-concentration were manufactured by using MIG/MAG process. After, the welded sample is extracted from the plate, the beads were bended and external stress was applied. Finally, they were inserted in ferric-chloride solution. Corrosive wear were assessed by means of optical microscopy in the HAZ by using polymeric resin mask and comparing profiles before and after inserting the sample into the solution. The results demonstrate the feasibility of the proposed methodology for assessing corrosive wear in the HAZ.

  9. A 3D Hybrid Integration Methodology for Terabit Transceivers

    DEFF Research Database (Denmark)

    Dong, Yunfeng; Johansen, Tom Keinicke; Zhurbenko, Vitaliy

    2015-01-01

    integration are described. An equivalent circuit model of the via-throughs connecting the RF circuitry to the modulator is proposed and its lumped element parameters are extracted. Wire bonding transitions between the driving and RF circuitry were designed and simulated. An optimized 3D interposer design......This paper presents a three-dimensional (3D) hybrid integration methodology for terabit transceivers. The simulation methodology for multi-conductor structures are explained. The effect of ground vias on the RF circuitry and the preferred interposer substrate material for large bandwidth 3D hybrid...

  10. Vibration-Driven Microrobot Positioning Methodologies for Nonholonomic Constraint Compensation

    Directory of Open Access Journals (Sweden)

    Kostas Vlachos

    2015-03-01

    Full Text Available This paper presents the formulation and practical implementation of positioning methodologies that compensate for the nonholonomic constraints of a mobile microrobot that is driven by two vibrating direct current (DC micromotors. The open-loop and closed-loop approaches described here add the capability for net sidewise displacements of the microrobotic platform. A displacement is achieved by the execution of a number of repeating steps that depend on the desired displacement, the speed of the micromotors, and the elapsed time. Simulation and experimental results verified the performance of the proposed methodologies.

  11. Humanitarian Logistics: a Clustering Methodology for Assisting Humanitarian Operations

    Directory of Open Access Journals (Sweden)

    Fabiana santos Lima

    2014-06-01

    Full Text Available In this paper, we propose a methodology to identify and classify regions by the type and frequency of disasters. The data on the clusters allow you to extract information that can be used in the preparedness phase as well as to identify the relief items needed to meet each cluster. Using this approach, the clusters are formed by using a computing tool that uses as the input the history data of the disasters in the Brazilian state of Santa Catarina, with a specific focus on: windstorms, hail, floods, droughts, landslides, and flash floods. The results show that the knowledge provided by the clustering analysis contributes to the decision making process in the response phase of Humanitarian Logistics (HL.

  12. Methodology for Assessment of Inertial Response from Wind Power Plants

    DEFF Research Database (Denmark)

    Altin, Müfit; Teodorescu, Remus; Bak-Jensen, Birgitte

    2012-01-01

    High wind power penetration levels result in additional requirements from wind power in order to improve frequency stability. Replacement of conventional power plants with wind power plants reduces the power system inertia due to the wind turbine technology. Consequently, the rate of change...... of frequency and the maximum frequency deviation increase after a disturbance such as generation loss, load increase, etc. Having no inherent inertial response, wind power plants need additional control concepts in order to provide an additional active power following a disturbance. Several control concepts...... have been implemented in the literature, but the assessment of these control concepts with respect to power system requirements has not been specified. In this paper, a methodology to assess the inertial response from wind power plants is proposed. Accordingly, the proposed methodology is applied...

  13. Safety analysis and evaluation methodology for fusion systems

    International Nuclear Information System (INIS)

    Fujii-e, Y.; Kozawa, Y.; Namba, C.

    1987-03-01

    Fusion systems which are under development as future energy systems have reached a stage that the break even is expected to be realized in the near future. It is desirable to demonstrate that fusion systems are well acceptable to the societal environment. There are three crucial viewpoints to measure the acceptability, that is, technological feasibility, economy and safety. These three points have close interrelation. The safety problem is more important since three large scale tokamaks, JET, TFTR and JT-60, start experiment, and tritium will be introduced into some of them as the fusion fuel. It is desirable to establish a methodology to resolve the safety-related issues in harmony with the technological evolution. The promising fusion system toward reactors is not yet settled. This study has the objective to develop and adequate methodology which promotes the safety design of general fusion systems and to present a basis for proposing the R and D themes and establishing the data base. A framework of the methodology, the understanding and modeling of fusion systems, the principle of ensuring safety, the safety analysis based on the function and the application of the methodology are discussed. As the result of this study, the methodology for the safety analysis and evaluation of fusion systems was developed. New idea and approach were presented in the course of the methodology development. (Kako, I.)

  14. Combining several thermal indices to generate a unique heat comfort assessment methodology

    Directory of Open Access Journals (Sweden)

    Wissam EL Hachem

    2015-11-01

    Full Text Available Purpose: The proposed methodology hopes to provide a systematic multi-disciplinary approach to assess the thermal environment while minimizing unneeded efforts. Design/methodology/approach: Different factors affect the perception of the human thermal experience: metabolic rate (biology, surrounding temperatures (heat balance and environmental factors and cognitive treatment (physiology.This paper proposes a combination of different multidisciplinary variables to generate a unique heat comfort assessment methodology. The variables at stake are physiological, biological, and environmental. Our own heat analysis is thoroughly presented and all relevant equations are described. Findings: Most companies are oblivious about potential dangers of heat stress accidents and thus about methods to monitor and prevent them. This methodology enables the company or the concerned individual to conduct a preliminary assessment with minimal wasted resources and time in unnecessary steps whilst providing a guideline for a detailed study with minimal error rates if needed. More so, thermal comfort is an integral part of sound ergonomics practices, which in turn are decisive for the success of any lean six sigma initiative. Research limitations/implications: This methodology requires several full implementations to finalize its design. Originality/value: Most used heat comfort models are inherently uncertain and tiresome to apply. An extensive literature review confirms the need for a uniform assessment methodology that combines the different thermal comfort models such as the Fanger comfort model (PMV, PPD and WGBT since high error rates coupled with tiresome calculations often hinder the thermal assessment process.

  15. Methodology for Selecting Best Management Practices Integrating Multiple Stakeholders and Criteria. Part 2: Case Study

    Directory of Open Access Journals (Sweden)

    Mauricio Carvallo Aceves

    2016-02-01

    Full Text Available The selection of stormwater Best Management Practices (BMPs for mitigating the effects of urbanization on the hydrological cycle could be a complex process due to conflicting stakeholder views, and varying levels of performance of BMPs across a range of criteria (runoff reduction, erosion control, etc.. Part 1 of this article proposed a methodology based on the application of multi-criteria decision aid (MCDA methods, which was tested here on a residential stormwater network in the Montreal area. The case study considered green roofs, rain gardens, rain barrels and pervious pavement over a range of economic, social, and water quality and quantity criteria by applying 4 MCDA methods under three different stakeholder views. The results indicated Elimination et Choix Traduisant la Réalité (ELECTRE III to be the most appropriate method for the methodology, presenting flexibility concerning threshold values, criteria weights, and showing shared top choices across stakeholders (rain gardens, and rain gardens in combination with pervious pavement. The methodology shows potential for more formal applications and research opportunities. Future work may lie in the inclusion of multiple objective optimization, better stakeholder engagement, estimation of economic benefits, water quality modeling, long-term hydrological simulations, and estimating real BMP pollutant removal rates.

  16. A Quality-Driven Methodology for Information Systems Integration

    Directory of Open Access Journals (Sweden)

    Iyad Zikra

    2017-10-01

    Full Text Available Information systems integration is an essential instrument for organizations to attain advantage in today’s growing and fast changing business and technology landscapes. Integration solutions generate added value by combining the functionality and services of heterogeneous and diverse systems. Existing integration environments tend to rely heavily on technical, platform-dependent skills. Consequently, the solutions that they enable are not optimally aligned with the envisioned business goals of the organization. Furthermore, the gap between the goals and the solutions complicates the task of evaluating the quality of integration solutions. To address these challenges, we propose a quality-driven, model-driven methodology for designing and developing integration solutions. The methodology spans organizational and systems design details, providing a holistic view of the integration solution and its underlying business goals. A multi-view meta-model provides the basis for the integration design. Quality factors that affect various aspects of the integration solution guide and inform the progress of the methodology. An example business case is presented to demonstrate the application of the methodology.

  17. A safety assessment methodology applied to CNS/ATM-based air traffic control system

    Energy Technology Data Exchange (ETDEWEB)

    Vismari, Lucio Flavio, E-mail: lucio.vismari@usp.b [Safety Analysis Group (GAS), School of Engineering at University of Sao Paulo (Poli-USP), Av. Prof. Luciano Gualberto, Trav.3, n.158, Predio da Engenharia de Eletricidade, Sala C2-32, CEP 05508-900, Sao Paulo (Brazil); Batista Camargo Junior, Joao, E-mail: joaocamargo@usp.b [Safety Analysis Group (GAS), School of Engineering at University of Sao Paulo (Poli-USP), Av. Prof. Luciano Gualberto, Trav.3, n.158, Predio da Engenharia de Eletricidade, Sala C2-32, CEP 05508-900, Sao Paulo (Brazil)

    2011-07-15

    In the last decades, the air traffic system has been changing to adapt itself to new social demands, mainly the safe growth of worldwide traffic capacity. Those changes are ruled by the Communication, Navigation, Surveillance/Air Traffic Management (CNS/ATM) paradigm , based on digital communication technologies (mainly satellites) as a way of improving communication, surveillance, navigation and air traffic management services. However, CNS/ATM poses new challenges and needs, mainly related to the safety assessment process. In face of these new challenges, and considering the main characteristics of the CNS/ATM, a methodology is proposed at this work by combining 'absolute' and 'relative' safety assessment methods adopted by the International Civil Aviation Organization (ICAO) in ICAO Doc.9689 , using Fluid Stochastic Petri Nets (FSPN) as the modeling formalism, and compares the safety metrics estimated from the simulation of both the proposed (in analysis) and the legacy system models. To demonstrate its usefulness, the proposed methodology was applied to the 'Automatic Dependent Surveillance-Broadcasting' (ADS-B) based air traffic control system. As conclusions, the proposed methodology assured to assess CNS/ATM system safety properties, in which FSPN formalism provides important modeling capabilities, and discrete event simulation allowing the estimation of the desired safety metric.

  18. A safety assessment methodology applied to CNS/ATM-based air traffic control system

    International Nuclear Information System (INIS)

    Vismari, Lucio Flavio; Batista Camargo Junior, Joao

    2011-01-01

    In the last decades, the air traffic system has been changing to adapt itself to new social demands, mainly the safe growth of worldwide traffic capacity. Those changes are ruled by the Communication, Navigation, Surveillance/Air Traffic Management (CNS/ATM) paradigm , based on digital communication technologies (mainly satellites) as a way of improving communication, surveillance, navigation and air traffic management services. However, CNS/ATM poses new challenges and needs, mainly related to the safety assessment process. In face of these new challenges, and considering the main characteristics of the CNS/ATM, a methodology is proposed at this work by combining 'absolute' and 'relative' safety assessment methods adopted by the International Civil Aviation Organization (ICAO) in ICAO Doc.9689 , using Fluid Stochastic Petri Nets (FSPN) as the modeling formalism, and compares the safety metrics estimated from the simulation of both the proposed (in analysis) and the legacy system models. To demonstrate its usefulness, the proposed methodology was applied to the 'Automatic Dependent Surveillance-Broadcasting' (ADS-B) based air traffic control system. As conclusions, the proposed methodology assured to assess CNS/ATM system safety properties, in which FSPN formalism provides important modeling capabilities, and discrete event simulation allowing the estimation of the desired safety metric.

  19. Study of a methodology of identifying important research problems by the PIRT process

    International Nuclear Information System (INIS)

    Aoki, Takayuki; Takagi, Toshiyuki; Urayama, Ryoichi; Komura, Ichiro; Furukawa, Takashi; Yusa, Noritaka

    2013-01-01

    In this paper, we propose a new methodology of identifying important research problems to be solved to improve the performance of some specific scientific technologies by the phenomena identification and ranking table (PIRT) process, which has been used as a methodology for demonstrating the validity of the best estimate simulation codes in USNRC licensing of nuclear power plants. It keeps the fundamental concepts of the original PIRT process but makes it possible to identify important factors affecting the performance of the technologies from the viewpoint of the figure of merit and problems associated with them, which need to be solved to improve the performance. Also in this paper, we demonstrate the effectiveness of the developed method by showing a specific example of the application to physical events or phenomena in objects having fatigue or SCC crack(s) under ultrasonic testing and eddy current testing. (author)

  20. Estimating significances of differences between slopes: A new methodology and software

    Directory of Open Access Journals (Sweden)

    Vasco M. N. C. S. Vieira

    2013-09-01

    Full Text Available Determining the significance of slope differences is a common requirement in studies of self-thinning, ontogeny and sexual dimorphism, among others. This has long been carried out testing for the overlap of the bootstrapped 95% confidence intervals of the slopes. However, the numerical random re-sampling with repetition favours the occurrence of re-combinations yielding largely diverging slopes, widening the confidence intervals and thus increasing the chances of overlooking significant differences. To overcome this problem a permutation test simulating the null hypothesis of no differences between slopes is proposed. This new methodology, when applied both to artificial and factual data, showed an enhanced ability to differentiate slopes.

  1. A literature review of applied adaptive design methodology within the field of oncology in randomised controlled trials and a proposed extension to the CONSORT guidelines.

    Science.gov (United States)

    Mistry, Pankaj; Dunn, Janet A; Marshall, Andrea

    2017-07-18

    The application of adaptive design methodology within a clinical trial setting is becoming increasingly popular. However the application of these methods within trials is not being reported as adaptive designs hence making it more difficult to capture the emerging use of these designs. Within this review, we aim to understand how adaptive design methodology is being reported, whether these methods are explicitly stated as an 'adaptive design' or if it has to be inferred and to identify whether these methods are applied prospectively or concurrently. Three databases; Embase, Ovid and PubMed were chosen to conduct the literature search. The inclusion criteria for the review were phase II, phase III and phase II/III randomised controlled trials within the field of Oncology that published trial results in 2015. A variety of search terms related to adaptive designs were used. A total of 734 results were identified, after screening 54 were eligible. Adaptive designs were more commonly applied in phase III confirmatory trials. The majority of the papers performed an interim analysis, which included some sort of stopping criteria. Additionally only two papers explicitly stated the term 'adaptive design' and therefore for most of the papers, it had to be inferred that adaptive methods was applied. Sixty-five applications of adaptive design methods were applied, from which the most common method was an adaptation using group sequential methods. This review indicated that the reporting of adaptive design methodology within clinical trials needs improving. The proposed extension to the current CONSORT 2010 guidelines could help capture adaptive design methods. Furthermore provide an essential aid to those involved with clinical trials.

  2. In search for an optimal methodology to calculate the valence electron affinities of temporary anions.

    Science.gov (United States)

    Puiatti, Marcelo; Vera, D Mariano A; Pierini, Adriana B

    2009-10-28

    Recently, we have proposed an approach for finding the valence anion ground state, based on the stabilization exerted by a polar solvent; the methodology used standard DFT methods and relatively inexpensive basis sets and yielded correct electron affinity (EA) values by gradually decreasing the dielectric constant of the medium. In order to address the overall performance of the new methodology, to find the best conditions for stabilizing the valence state and to evaluate its scope and limitations, we gathered a pool of 60 molecules, 25 of them bearing the conventional valence state as the ground anion and 35 for which the lowest anion state found holds the extra electron in a diffuse orbital around the molecule (non valence state). The results obtained by testing this representative set suggest a very good performance for most species having an experimental EA less negative than -3.0 eV; the correlation at the B3LYP/6-311+G(2df,p) level being y = 1.01x + 0.06, with a correlation index of 0.985. As an alternative, the time dependent DFT (TD-DFT) approach was also tested with both B3LYP and PBE0 functionals. The methodology we proposed shows a comparable or better accuracy with respect to TD-DFT, although the TD-DFT approach with the PBE0 functional is suggested as a suitable estimate for species with the most negative EAs (ca.-2.5 to -3.5 eV), for which stabilization strategies can hardly reach the valence state. As an application, a pool of 8 compounds of key biological interest with EAs which remain unknown or unclear were predicted using the new methodology.

  3. Practical methodologies for the calculation of capacity in electricity markets for wind energy

    International Nuclear Information System (INIS)

    Botero B, Sergio; Giraldo V, Luis Alfonso; Isaza C, Felipe

    2008-01-01

    Determining the real capacity of the generators in a power market is an essential task in order to estimate the actual system reliability, and to estimate the reward for generators due to their capacity in the firm energy market. In the wind power case, which is an intermittent resource, several methodologies have been proposed to estimate the capacity of a wind power emplacement, not only for planning but also for firm energy remuneration purposes. This paper presents some methodologies that have been proposed or implemented around the world in order to calculate the capacity of this energy resource.

  4. Methodological proposal for evaluating and selecting environment al indicators, Case: Chachafruto Stream Basin, Rionegro, Antioquia, Colombia

    International Nuclear Information System (INIS)

    Osorio Velez, Luis Fernando; Pineda Correa, Marcelena

    2000-01-01

    The investigation mainly responds to the necessity of developing a methodology that allows getting indicators to make easier the process of making decisions in the environmental administration field. The elaboration was relied on the support of the Corporacion Autonoma Regional Rionegro - Nare CORNARE in Antioquia - Colombia, through a subscribed agreement between this entity and the authors. The development of the investigation was carried out in two parts: the first involves the search of methodological paths for the evaluation and selection of applicable indicators to basins, Through the creation of parameters that allow qualifying these indicators in direct form; this is followed by a statistical treatment that allows selecting indicators in a rational way. For application purposes, some criterions are defined in a such way that the selected indicators can be evaluated; with these criterions the matrix is constructed; this allows to view and qualify the indicators, starting from ranges and scales previously defined; once the evaluation and qualification matrix are carried out, the selection process is begun from multivariate analysis. The second part consists in the methodology application expounded to a pattern of indicators previously defined and a determined territory (Basin of the Chachafruto Stream, Rionegro - Antioquia - Colombia); starting from the listing of the whole reported indicators in the consulted literature, the ability of themselves to reflex the basin problems is analyzed, based on parameters such as local contextualization and focuses of the topic. Once the first selection is done, the indicators are submitted to the qualification and evaluation matrix and its results are analyzed by multivariate analysis, in order to condense the environmental indicators to be used. Subsequently, for the evaluation of selected indicators, it is necessary to compile diverse thematic information and to identify the existent databases for the select territory

  5. A review of methodologies used in research on cadastral development

    DEFF Research Database (Denmark)

    Silva, Maria Augusta; Stubkjær, Erik

    2002-01-01

    to the acceptance of research methodologies needed for cadastral development, and thereby enhance theory in the cadastral domain. The paper reviews nine publica-tions on cadastre and identifies the methodologies used. The review focuses on the institutional, social political and economic aspects of cadastral......World-wide, much attention has been given to cadastral development. As a consequence of experiences made during the last decades, several authors have stated the need of research in the domain of cadastre and proposed methodologies to be used. The purpose of this paper is to contribute...... development, rather than on the technical aspects. The main conclusion of this paper is that the methodologies used are largely those of the social sciences. That agrees with the notion that cadastre relates as much to people and institutions, as it relates to land, and that cadastral systems are shaped...

  6. Toward the Long-Term Scientific Study of Encounter Group Phenomena: I. Methodological Considerations.

    Science.gov (United States)

    Diamond, Michael Jay; Shapiro, Jerrold Lee

    This paper proposes a model for the long-term scientific study of encounter, T-, and sensitivity groups. The authors see the need for overcoming major methodological and design inadequacies of such research. They discuss major methodological flaws in group outcome research as including: (1) lack of adequate base rate or pretraining measures; (2)…

  7. Risk assessment by convergence methodology in RDD scenarios

    International Nuclear Information System (INIS)

    Araujo, Olga Maria Oliveira de; Andrade, Edson Ramos de; Rebello, Wilson Freitas; Silva, Gabriel Fidalgo Queiroz da

    2015-01-01

    An RDD event occurs by explosion and radioactive material dispersion where particles containing radioactive material can reach great distances from original point of the explosion and generating a plume of contamination. The use of a RDD is regarded as the most likely scenario involving radiological terrorist material. Accurate information on the population and the estimated dose are essential for analysis during the decision process. This work intends to present a proposal for a convergence of methodologies using the computer simulation codes Hotspot Health Physics 3.0 and the statistical model Radiation Effects Research Foundation (RERF) to calculate the approximate dose depending on the distance of the original point of the explosion of an RDD. From those data, the relative risk of developing tumors is estimated, as well as the probability of causation. At a later stage, the proposed combination of actions intended to help the decision-making and employment response personnel in emergency protection measures, such as sheltering and evacuation through the RESRAD-RDD software. The convergence of the proposed methodology can accelerate the process of acquiring information during the first hours of a radiological scenario and provide proper management of medical response and organization of the overall response. (author)

  8. Risk assessment by convergence methodology in RDD scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Olga Maria Oliveira de; Andrade, Edson Ramos de; Rebello, Wilson Freitas; Silva, Gabriel Fidalgo Queiroz da, E-mail: olgafisica2013@hotmail.com, E-mail: fisica.dna@gmail.com, E-mail: rebello@ime.eb.br, E-mail: profgabriel.fisica@gmail.com [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Secao de Engenharia Nuclear

    2015-07-01

    An RDD event occurs by explosion and radioactive material dispersion where particles containing radioactive material can reach great distances from original point of the explosion and generating a plume of contamination. The use of a RDD is regarded as the most likely scenario involving radiological terrorist material. Accurate information on the population and the estimated dose are essential for analysis during the decision process. This work intends to present a proposal for a convergence of methodologies using the computer simulation codes Hotspot Health Physics 3.0 and the statistical model Radiation Effects Research Foundation (RERF) to calculate the approximate dose depending on the distance of the original point of the explosion of an RDD. From those data, the relative risk of developing tumors is estimated, as well as the probability of causation. At a later stage, the proposed combination of actions intended to help the decision-making and employment response personnel in emergency protection measures, such as sheltering and evacuation through the RESRAD-RDD software. The convergence of the proposed methodology can accelerate the process of acquiring information during the first hours of a radiological scenario and provide proper management of medical response and organization of the overall response. (author)

  9. Re-potentiation of hydro-generators: a proposal of analysis and implementation methodology; Repotenciacao de hidrogeradores: uma proposta de metodologia de analise e implantacao

    Energy Technology Data Exchange (ETDEWEB)

    Sa, Fabio Salomao Fernandes

    1996-07-01

    The hydro-generators suffer during its operative useful life a combination of stresses of nature thermal, electric, mechanics and environmental. With the time, they are going losing the capacity to support those stresses and the power plants suffer, more and more frequently, undesirable stops for repair services and maintenance. In function of the high costs incurred with these stopped, the operation of the power plant can be economically impracticable. That unavailability of the generation for the electric system, it results in reduction of the reliability, burdening the politics of load ruling. The re-potentiation is a proposal that seeks to extend the useful life of hydro-generators, at the same time that it try to rescue the reliability and the readiness of the plant, with larger power. The power increase is usually made possible, or for the surplus of the hydro resources in excess, or for the reduction of the losses of all the components of the energy flow. That work proposes a methodology structured starting from the estimate of the potential, of rising of data, of the basic project and of the executive project. Modern techniques of engineering, new processes and new materials, allow the re-potentiation of those hydro-generators returning them new useful life, under conditions economically justifiable.

  10. Quantifying biopsychosocial aspects in everyday contexts: an integrative methodological approach from the behavioral sciences

    Science.gov (United States)

    Portell, Mariona; Anguera, M Teresa; Hernández-Mendo, Antonio; Jonsson, Gudberg K

    2015-01-01

    Contextual factors are crucial for evaluative research in psychology, as they provide insights into what works, for whom, in what circumstances, in what respects, and why. Studying behavior in context, however, poses numerous methodological challenges. Although a comprehensive framework for classifying methods seeking to quantify biopsychosocial aspects in everyday contexts was recently proposed, this framework does not contemplate contributions from observational methodology. The aim of this paper is to justify and propose a more general framework that includes observational methodology approaches. Our analysis is rooted in two general concepts: ecological validity and methodological complementarity. We performed a narrative review of the literature on research methods and techniques for studying daily life and describe their shared properties and requirements (collection of data in real time, on repeated occasions, and in natural settings) and classification criteria (eg, variables of interest and level of participant involvement in the data collection process). We provide several examples that illustrate why, despite their higher costs, studies of behavior and experience in everyday contexts offer insights that complement findings provided by other methodological approaches. We urge that observational methodology be included in classifications of research methods and techniques for studying everyday behavior and advocate a renewed commitment to prioritizing ecological validity in behavioral research seeking to quantify biopsychosocial aspects. PMID:26089708

  11. Softwareland Chronicles: A Software Development Meta-Process Proposal

    Directory of Open Access Journals (Sweden)

    Bolanos Sandro

    2016-05-01

    Full Text Available This paper presents the software development meta-process (SD-MP as a proposal to set up software projects. Within this proposal we offer conceptual elements that help solve the war of methodologies and processes in favor of an integrating viewpoint, where the main flaws associated with conventional and agile approaches are removed. Our newly developed software platform to support the meta-process is also presented together with three case studies involving projects currently in progress, where the framework proposed in SD-MP has been applied.

  12. INSTALLING AN ERP SYSTEM WITH A METHODOLOGY BASED ON THE PRINCIPLES OF GOAL DIRECTED PROJECT MANAGEMENT

    Directory of Open Access Journals (Sweden)

    Ioannis Zafeiropoulos

    2010-01-01

    Full Text Available This paper describes a generic methodology to support the process of modelling, adaptation and implementation (MAI of Enterprise Resource Planning Systems (ERPS based on the principles of goal directed project management (GDPM. The proposed methodology guides the project manager through specific stages in order to successfully complete the ERPS implementation. The development of the proper MAI methodology is deemed necessary because it will simplify the installation process of ERPS. The goal directed project management method was chosen since it provides a way of focusing all changes towards a predetermined goal. The main stages of the methodology are the promotion and preparation steps, the proposal, the contract, the implementation and the completion. The methodology was applied as a pilot application by a major ERPS development company. Important benefits were the easy and effective guidance for all installation and analysis stages, the faster installation for the ERPS and the control and cost reduction for the installation, in terms of time, manpower, technological equipment and other resources.

  13. The GPT methodology. New fields of application

    International Nuclear Information System (INIS)

    Gandini, A.; Gomit, J.M.; Abramytchev, V.

    1996-01-01

    The GPT (Generalized Perturbation Theory) methodology is described, and a new application is discussed. The results obtained for a simple model (zero dimension, six parameters of interest) show that the expressions obtained using the GPT methodology, lead to results close to those obtained through direct calculations. The GPT methodology is useful to be used for radioactive waste disposal problems. The potentiality of the method linked to zero dimension model can be extended to radionuclide migration problems with space description. (K.A.)

  14. Benefits of using an optimization methodology for identifying robust process integration investments under uncertainty-A pulp mill example

    Energy Technology Data Exchange (ETDEWEB)

    Svensson, Elin [Department of Energy and Environment, Division of Heat and Power Technology, Chalmers University of Technology, SE-412 96 Goeteborg (Sweden)], E-mail: elin.svensson@chalmers.se; Berntsson, Thore [Department of Energy and Environment, Division of Heat and Power Technology, Chalmers University of Technology, SE-412 96 Goeteborg (Sweden); Stroemberg, Ann-Brith [Fraunhofer-Chalmers Research Centre for Industrial Mathematics, Chalmers Science Park, SE-412 88 Gothenburg (Sweden)

    2009-03-15

    This paper presents a case study on the optimization of process integration investments in a pulp mill considering uncertainties in future electricity and biofuel prices and CO{sub 2} emissions charges. The work follows the methodology described in Svensson et al. [Svensson, E., Berntsson, T., Stroemberg, A.-B., Patriksson, M., 2008b. An optimization methodology for identifying robust process integration investments under uncertainty. Energy Policy, in press, (doi:10.1016/j.enpol.2008.10.023)] where a scenario-based approach is proposed for the modelling of uncertainties. The results show that the proposed methodology provides a way to handle the time dependence and the uncertainties of the parameters. For the analyzed case, a robust solution is found which turns out to be a combination of two opposing investment strategies. The difference between short-term and strategic views for the investment decision is analyzed and it is found that uncertainties are increasingly important to account for as a more strategic view is employed. Furthermore, the results imply that the obvious effect of policy instruments aimed at decreasing CO{sub 2} emissions is, in applications like this, an increased profitability for all energy efficiency investments, and not as much a shift between different alternatives.

  15. Benefits of using an optimization methodology for identifying robust process integration investments under uncertainty. A pulp mill example

    Energy Technology Data Exchange (ETDEWEB)

    Svensson, Elin; Berntsson, Thore [Department of Energy and Environment, Division of Heat and Power Technology, Chalmers University of Technology, SE-412 96 Goeteborg (Sweden); Stroemberg, Ann-Brith [Fraunhofer-Chalmers Research Centre for Industrial Mathematics, Chalmers Science Park, SE-412 88 Gothenburg (Sweden)

    2009-03-15

    This paper presents a case study on the optimization of process integration investments in a pulp mill considering uncertainties in future electricity and biofuel prices and CO{sub 2} emissions charges. The work follows the methodology described in Svensson et al. [Svensson, E., Berntsson, T., Stroemberg, A.-B., Patriksson, M., 2008b. An optimization methodology for identifying robust process integration investments under uncertainty. Energy Policy, in press, doi:10.1016/j.enpol.2008.10.023] where a scenario-based approach is proposed for the modelling of uncertainties. The results show that the proposed methodology provides a way to handle the time dependence and the uncertainties of the parameters. For the analyzed case, a robust solution is found which turns out to be a combination of two opposing investment strategies. The difference between short-term and strategic views for the investment decision is analyzed and it is found that uncertainties are increasingly important to account for as a more strategic view is employed. Furthermore, the results imply that the obvious effect of policy instruments aimed at decreasing CO{sub 2} emissions is, in applications like this, an increased profitability for all energy efficiency investments, and not as much a shift between different alternatives. (author)

  16. Benefits of using an optimization methodology for identifying robust process integration investments under uncertainty-A pulp mill example

    International Nuclear Information System (INIS)

    Svensson, Elin; Berntsson, Thore; Stroemberg, Ann-Brith

    2009-01-01

    This paper presents a case study on the optimization of process integration investments in a pulp mill considering uncertainties in future electricity and biofuel prices and CO 2 emissions charges. The work follows the methodology described in Svensson et al. [Svensson, E., Berntsson, T., Stroemberg, A.-B., Patriksson, M., 2008b. An optimization methodology for identifying robust process integration investments under uncertainty. Energy Policy, in press, (doi:10.1016/j.enpol.2008.10.023)] where a scenario-based approach is proposed for the modelling of uncertainties. The results show that the proposed methodology provides a way to handle the time dependence and the uncertainties of the parameters. For the analyzed case, a robust solution is found which turns out to be a combination of two opposing investment strategies. The difference between short-term and strategic views for the investment decision is analyzed and it is found that uncertainties are increasingly important to account for as a more strategic view is employed. Furthermore, the results imply that the obvious effect of policy instruments aimed at decreasing CO 2 emissions is, in applications like this, an increased profitability for all energy efficiency investments, and not as much a shift between different alternatives

  17. 76 FR 38191 - New Proposed Collection; Comment Request; Biospecimen and Physical Measures Formative Research...

    Science.gov (United States)

    2011-06-29

    ...; Comment Request; Biospecimen and Physical Measures Formative Research Methodology Studies for the National... comment. Proposed Collection: Title: Biospecimen and Physical Measures Formative Research Methodology... Development* to conduct a national longitudinal study of environmental influences (including physical...

  18. The qualitative research proposal

    Directory of Open Access Journals (Sweden)

    H Klopper

    2008-09-01

    Full Text Available Qualitative research in the health sciences has had to overcome many prejudices and a number of misunderstandings, but today qualitative research is as acceptable as quantitative research designs and is widely funded and published. Writing the proposal of a qualitative study, however, can be a challenging feat, due to the emergent nature of the qualitative research design and the description of the methodology as a process. Even today, many sub-standard proposals at post-graduate evaluation committees and application proposals to be considered for funding are still seen. This problem has led the researcher to develop a framework to guide the qualitative researcher in writing the proposal of a qualitative study based on the following research questions: (i What is the process of writing a qualitative research proposal? and (ii What does the structure and layout of a qualitative proposal look like? The purpose of this article is to discuss the process of writing the qualitative research proposal, as well as describe the structure and layout of a qualitative research proposal. The process of writing a qualitative research proposal is discussed with regards to the most important questions that need to be answered in your research proposal with consideration of the guidelines of being practical, being persuasive, making broader links, aiming for crystal clarity and planning before you write. While the structure of the qualitative research proposal is discussed with regards to the key sections of the proposal, namely the cover page, abstract, introduction, review of the literature, research problem and research questions, research purpose and objectives, research paradigm, research design, research method, ethical considerations, dissemination plan, budget and appendices.

  19. Towards an MDA-based development methodology for distributed applications

    NARCIS (Netherlands)

    van Sinderen, Marten J.; Gavras, A.; Belaunde, M.; Ferreira Pires, Luis; Andrade Almeida, João

    2004-01-01

    This paper proposes a development methodology for distributed applications based on the principles and concepts of the Model-Driven Architecture (MDA). The paper identifies phases and activities of an MDA-based development trajectory, and defines the roles and products of each activity in accordance

  20. submitter Methodologies for the Statistical Analysis of Memory Response to Radiation

    CERN Document Server

    Bosser, Alexandre L; Tsiligiannis, Georgios; Frost, Christopher D; Zadeh, Ali; Jaatinen, Jukka; Javanainen, Arto; Puchner, Helmut; Saigne, Frederic; Virtanen, Ari; Wrobel, Frederic; Dilillo, Luigi

    2016-01-01

    Methodologies are proposed for in-depth statistical analysis of Single Event Upset data. The motivation for using these methodologies is to obtain precise information on the intrinsic defects and weaknesses of the tested devices, and to gain insight on their failure mechanisms, at no additional cost. The case study is a 65 nm SRAM irradiated with neutrons, protons and heavy ions. This publication is an extended version of a previous study [1].

  1. Comparison between two methodologies for uniformity correction of extensive reference sources

    International Nuclear Information System (INIS)

    Junior, Iremar Alves S.; Siqueira, Paulo de T.D.; Vivolo, Vitor; Potiens, Maria da Penha A.; Nascimento, Eduardo

    2016-01-01

    This article presents the procedures to obtain the uniformity correction factors for extensive reference sources proposed by two different methodologies. The first methodology is presented by the Good Practice Guide of Nº 14 of the NPL, which provides a numerical correction. The second one uses the radiation transport code, MCNP5, to obtain the correction factor. Both methods retrieve very similar corrections factor values, with a maximum deviation of 0.24%. (author)

  2. Pressure-based high-order TVD methodology for dynamic stall control

    Science.gov (United States)

    Yang, H. Q.; Przekwas, A. J.

    1992-01-01

    The quantitative prediction of the dynamics of separating unsteady flows, such as dynamic stall, is of crucial importance. This six-month SBIR Phase 1 study has developed several new pressure-based methodologies for solving 3D Navier-Stokes equations in both stationary and moving (body-comforting) coordinates. The present pressure-based algorithm is equally efficient for low speed incompressible flows and high speed compressible flows. The discretization of convective terms by the presently developed high-order TVD schemes requires no artificial dissipation and can properly resolve the concentrated vortices in the wing-body with minimum numerical diffusion. It is demonstrated that the proposed Newton's iteration technique not only increases the convergence rate but also strongly couples the iteration between pressure and velocities. The proposed hyperbolization of the pressure correction equation is shown to increase the solver's efficiency. The above proposed methodologies were implemented in an existing CFD code, REFLEQS. The modified code was used to simulate both static and dynamic stalls on two- and three-dimensional wing-body configurations. Three-dimensional effect and flow physics are discussed.

  3. Multi-attribute Evaluation of Website Quality in E-business Using an Integrated Fuzzy AHPTOPSIS Methodology

    Directory of Open Access Journals (Sweden)

    Tolga Kaya

    2010-09-01

    Full Text Available Success of an e-business company is strongly associated with the relative quality of its website compared to that of its competitors. The purpose of this study is to propose a multi-attribute e-business website quality evaluation methodology based on a modified fuzzy TOPSIS approach. In the proposed methodology, weights of the evaluation criteria are generated by a fuzzy AHP procedure. In performance evaluation problems, the judgments of the experts may usually be vague in form. As fuzzy logic can successfully deal with this kind of uncertainty in human preferences, both classical TOPSIS and classical AHP procedures are implemented under fuzzy environment. The proposed TOPSIS-AHP methodology has successfully been applied to a multi-attribute website quality evaluation problem in Turkish e-business market. Nine sub-criteria under four main categories are used in the evaluation of the most popular e-business websites of Turkey. A sensitivity analysis is also provided.

  4. Methodology applied by IRSN for nuclear accident cost estimations in France

    International Nuclear Information System (INIS)

    2013-01-01

    This report describes the methodology used by IRSN to estimate the cost of potential nuclear accidents in France. It concerns possible accidents involving pressurized water reactors leading to radioactive releases in the environment. These accidents have been grouped in two accident families called: severe accidents and major accidents. Two model scenarios have been selected to represent each of these families. The report discusses the general methodology of nuclear accident cost estimation. The crucial point is that all cost should be considered: if not, the cost is underestimated which can lead to negative consequences for the value attributed to safety and for crisis preparation. As a result, the overall cost comprises many components: the most well-known is offsite radiological costs, but there are many others. The proposed estimates have thus required using a diversity of methods which are described in this report. Figures are presented at the end of this report. Among other things, they show that purely radiological costs only represent a non-dominant part of foreseeable economic consequences

  5. Ensemble Empirical Mode Decomposition based methodology for ultrasonic testing of coarse grain austenitic stainless steels.

    Science.gov (United States)

    Sharma, Govind K; Kumar, Anish; Jayakumar, T; Purnachandra Rao, B; Mariyappa, N

    2015-03-01

    A signal processing methodology is proposed in this paper for effective reconstruction of ultrasonic signals in coarse grained high scattering austenitic stainless steel. The proposed methodology is comprised of the Ensemble Empirical Mode Decomposition (EEMD) processing of ultrasonic signals and application of signal minimisation algorithm on selected Intrinsic Mode Functions (IMFs) obtained by EEMD. The methodology is applied to ultrasonic signals obtained from austenitic stainless steel specimens of different grain size, with and without defects. The influence of probe frequency and data length of a signal on EEMD decomposition is also investigated. For a particular sampling rate and probe frequency, the same range of IMFs can be used to reconstruct the ultrasonic signal, irrespective of the grain size in the range of 30-210 μm investigated in this study. This methodology is successfully employed for detection of defects in a 50mm thick coarse grain austenitic stainless steel specimens. Signal to noise ratio improvement of better than 15 dB is observed for the ultrasonic signal obtained from a 25 mm deep flat bottom hole in 200 μm grain size specimen. For ultrasonic signals obtained from defects at different depths, a minimum of 7 dB extra enhancement in SNR is achieved as compared to the sum of selected IMF approach. The application of minimisation algorithm with EEMD processed signal in the proposed methodology proves to be effective for adaptive signal reconstruction with improved signal to noise ratio. This methodology was further employed for successful imaging of defects in a B-scan. Copyright © 2014. Published by Elsevier B.V.

  6. A methodology for evaluating environmental impacts of railway freight transportation policies

    International Nuclear Information System (INIS)

    Lopez, Ignacio; Rodriguez, Javier; Buron, Jose Manuel; Garcia, Alberto

    2009-01-01

    Railway freight transportation presents a degree of complexity which frequently makes impossible to model it with sufficient precision. Currently, energetic and environmental impacts of freight transportation are usually modelled following average data, which do not reflect the characteristics of specific lines. These models allow qualitative approximations which may be used as criteria for designing high-level transportation policies: road-train modal shift, regional energetic planning or environmental policies. This paper proposes a methodology for estimating railway consumption associated to a specific railway line which yields a new degree of precision. It is based on estimating different contributions to railway consumption by a collection of factors, mobility, operation, or infrastructure-related. This procedure also allows applying the methodology for designing transportation policies in detail: evaluating impact of modal shift, consumption and pollutant emissions on a specific line, as well as the effect of building tunnels, reducing slopes, improving traffic control, etc. A comparison of the estimations given by the conventional approach and the proposed methodology is offered, as well as further comments on the results.

  7. Proposal of Integrated Safety Assessment Methodology for Embedded System

    International Nuclear Information System (INIS)

    Sun, Wei; Kageyama, Makoto; Kanemoto, Shigeru

    2011-01-01

    To do risk analysis and risk evaluation for complicated safety critical embedded systems, there are three things should be paid a good attention: 1) an efficient and integrated model expression of embedded systems: 2) systematic risk analysis based on integrated system model: 3) quantitative risk evaluation for software and hardware integrated system. In this paper, taken electric water boiler as a target system, a proposal of risk analysis and risk evaluation for the embedded system is presented to meet these three purposes. In risk analysis, MFM is used and FT is generated automatically from MFM following some rules: And in risk evaluation, GO-FLOW is used to evaluate the reliability of sensors. And furthermore, FIT is applied to evaluate the safety software logic based on the diversity design concept. Although the electric water boiler is a simple example, it includes the key components of the embedded system like sensors, actuators, and software component. So, the process of modeling, analysis, and evaluation could be applied to other kinds of complicated embedded systems

  8. Acoustic propagation in viscous fluid with uniform flow and a novel design methodology for ultrasonic flow meter.

    Science.gov (United States)

    Chen, Yong; Huang, Yiyong; Chen, Xiaoqian

    2013-02-01

    Ultrasonic flow meter with non-invasive no-moving-parts construction has good prospective application for space on-orbit fluid gauging. In traditional pulse transit time flow meter, inconsistency of ultrasonic transducers leads to measurement error and plane wave theory, bases of transit time flow meter, is valuable only for low-frequency wave propagation in inviscid fluid and will lose feasibility when fluid viscosity is considered. In this paper, based on the hydrodynamics of viscous fluid, wave propagation with uniform flow profile is mathematically formulated and a novel solution for viscous fluid using potential theory is firstly presented. Then a novel design methodology of continuous ultrasonic flow meter is proposed, where high measurement rangeability and accuracy are guaranteed individually by solving the integral ambiguity using multi-tone wide laning strategy and the fractional phase shift using phase lock loop tracking method. A comparison with transit time ultrasonic flow meter shows the advantage of proposed methodology. In the end, parametric analysis of viscosity on wave propagation and ultrasonic flow meter is compressively investigated. Crown Copyright © 2012. Published by Elsevier B.V. All rights reserved.

  9. Methodological pluralism in the teaching of Astronomy

    Science.gov (United States)

    de Macedo, Josué Antunes; Voelzke, Marcos Rincon

    2015-04-01

    This paper discusses the feasibility of using a teaching strategy called methodological pluralism, consisting of the use of various methodological resources in order to provide a meaningful learning. It is part of a doctoral thesis, which aims to investigate contributions to the use of traditional resources combined with digital technologies, in order to create autonomy for future teachers of Natural Sciences and Mathematics in relation to themes in Astronomy. It was offered an extension course at the "Federal Institution of Education, Science and Technology" in the North of Minas Gerais (FINMG), Campus Januaria, for thirty-two students of licentiate courses in Physics, Mathematics and Biological Sciences, involving themes of Astronomy, in order to search and contribute to improving the training of future teachers. The following aspects are used: the mixed methodology, with pre-experimental design, combined with content analysis. The results indicate the rates of students' prior knowledge in relation to Astronomy was low; meaningful learning indications of concepts related to Astronomy, and the feasibility of using digital resources Involving technologies, articulated with traditional materials in the teaching of Astronomy. This research sought to contribute to the initial teacher training, especially in relation to Astronomy Teaching, proposing new alternatives to promote the teaching of this area of knowledge, extending the methodological options of future teachers.

  10. Damage detection methodology on beam-like structures based on combined modal Wavelet Transform strategy

    Science.gov (United States)

    Serra, Roger; Lopez, Lautaro

    2018-05-01

    Different approaches on the detection of damages based on dynamic measurement of structures have appeared in the last decades. They were based, amongst others, on changes in natural frequencies, modal curvatures, strain energy or flexibility. Wavelet analysis has also been used to detect the abnormalities on modal shapes induced by damages. However the majority of previous work was made with non-corrupted by noise signals. Moreover, the damage influence for each mode shape was studied separately. This paper proposes a new methodology based on combined modal wavelet transform strategy to cope with noisy signals, while at the same time, able to extract the relevant information from each mode shape. The proposed methodology will be then compared with the most frequently used and wide-studied methods from the bibliography. To evaluate the performance of each method, their capacity to detect and localize damage will be analyzed in different cases. The comparison will be done by simulating the oscillations of a cantilever steel beam with and without defect as a numerical case. The proposed methodology proved to outperform classical methods in terms of noisy signals.

  11. Systematic screening methodology and energy efficient design of ionic liquid-based separation processes

    DEFF Research Database (Denmark)

    Kulajanpeng, Kusuma; Suriyapraphadilok, Uthaiporn; Gani, Rafiqul

    2016-01-01

    in size of the target solute was investigated using the same separation process and IL entrainer to obtain the same product purity. The proposed methodology has been evaluated through a case study of binary alcoholic aqueous azeotropic separation: water+ethanol and water+isopropanol.......A systematic methodology for the screening of ionic liquids (ILs) as entrainers and for the design of ILs-based separation processes in various homogeneous binary azeotropic mixtures has been developed. The methodology focuses on the homogeneous binary aqueous azeotropic systems (for example, water...

  12. Proposal of a methodology for computing damages from flexo-rotative fatigue considering the theory of the acting average stresses

    International Nuclear Information System (INIS)

    Tanius Rodrigues Mansur; Alvaro Alvarenga Junior; Joao Mario Andrade Pinto; Wellington Antonio Soares; Ernani Sales Palma

    2005-01-01

    The useful life of metallic structures is many times governed by fatigue processes caused by vibrations or by application of dynamic loads, periodic or not. Many times the amplitude of the alternated stress applied to a structural component can vary during its useful life. In this situation the direct use of S-N-P curves cannot be done because they are generated on the basis of alternated stress with constant amplitude. Several theories have been developed during the last times, where some are deterministic and other probabilistic, in order to give a component designer a more efficient and correct tool for approaching the problem. They are called Theories on Damage Accumulation. The phenomenon of creating damages represents the generation of superficial discontinuities caused by micro-cracks or by volumetric cavities [Lemaitre and Chaboche, 1985]. In the continuous mechanics, the superficial density of micro-defects (micro-cracks or cavities) inside the shear plan of the representative element volume of the sample is the variable used to quantify the damage. A methodology for evaluating damage accumulation using average of stresses is proposed in this paper. Results obtained for a 50% failure probability are presented and are compared to those values obtained using the theories of Palmgren-Miner, Henry, Corten-Dolan, Marine, Manson, and Knee-point. (authors)

  13. A proposed methodology to control body temperature in patients at risk of hypothermia by means of active rewarming systems.

    Science.gov (United States)

    Costanzo, Silvia; Cusumano, Alessia; Giaconia, Carlo; Mazzacane, Sante

    2014-01-01

    Hypothermia is a common complication in patients undergoing surgery under general anesthesia. It has been noted that, during the first hour of surgery, the patient's internal temperature (Tcore) decreases by 0.5-1.5°C due to the vasodilatory effect of anesthetic gases, which affect the body's thermoregulatory system by inhibiting vasoconstriction. Thus a continuous check on patient temperature must be carried out. The currently most used methods to avoid hypothermia are based on passive systems (such as blankets reducing body heat loss) and on active ones (thermal blankets, electric or hot-water mattresses, forced hot air, warming lamps, etc.). Within a broader research upon the environmental conditions, pollution, heat stress, and hypothermia risk in operating theatres, the authors set up an experimental investigation by using a warming blanket chosen from several types on sale. Their aim was to identify times and ways the human body reacts to the heat flowing from the blanket and the blanket's effect on the average temperature Tskin and, as a consequence, on Tcore temperature of the patient. The here proposed methodology could allow surgeons to fix in advance the thermal power to supply through a warming blanket for reaching, in a prescribed time, the desired body temperature starting from a given state of hypothermia.

  14. A methodology for flood risk appraisal in Lithuania

    Directory of Open Access Journals (Sweden)

    Kriščiukaitienė Irena

    2015-06-01

    Full Text Available This paper presents a methodology for flood risk mapping as envisaged by the Directive on the Assessment and Management of Flood Risks [Directive 2007/60/EC]. Specifically, we aimed at identifying the types of flood damage that can be estimated given data availability in Lithuania. Furthermore, we present the main sources of data and the associated cost functions. The methodology covers the following main types of flood threats: risk to inhabitants, risk to economic activity, and social risk. A multi-criteria framework for aggregation of different risks is proposed to provide a comprehensive appraisal of flood risk. On the basis of the proposed research, flood risk maps have been prepared for Lithuania. These maps are available for each type of flood risk (i.e. inhabitants, economic losses, social risk as well as for aggregate risk. The results indicate that flood risk management is crucial for western and central Lithuania, whereas other parts of the country are not likely to suffer from significant losses due to flooding.

  15. New methodology of designing inexpensive hybrid control-acquisition systems for mechatronic constructions.

    Science.gov (United States)

    Augustyn, Jacek

    2013-12-13

    This article presents a new methodology for designing a hybrid control and acquisition system consisting of a 32-bit SoC microsystem connected via a direct Universal Serial Bus (USB) with a standard commercial off-the-shelf (COTS) component running the Android operating system. It is proposed to utilize it avoiding the use of an additional converter. An Android-based component was chosen to explore the potential for a mobile, compact and energy efficient solution with easy to build user interfaces and easy wireless integration with other computer systems. This paper presents results of practical implementation and analysis of experimental real-time performance. It covers closed control loop time between the sensor/actuator module and the Android operating system as well as the real-time sensor data stream within such a system. Some optimisations are proposed and their influence on real-time performance was investigated. The proposed methodology is intended for acquisition and control of mechatronic systems, especially mobile robots. It can be used in a wide range of control applications as well as embedded acquisition-recording devices, including energy quality measurements, smart-grids and medicine. It is demonstrated that the proposed methodology can be employed without developing specific device drivers. The latency achieved was less than 0.5 ms and the sensor data stream throughput was on the order of 750 KB/s (compared to 3 ms latency and 300 KB/s in traditional solutions).

  16. Methodological approach to organizational performance improvement process

    OpenAIRE

    Buble, Marin; Dulčić, Želimir; Pavić, Ivan

    2017-01-01

    Organizational performance improvement is one of the fundamental enterprise tasks. This especially applies to the case when the term “performance improvement” implies efficiency improvement measured by indicators, such as ROI, ROE, ROA, or ROVA/ROI. Such tasks are very complex, requiring implementation by means of project management. In this paper, the authors propose a methodological approach to improving the organizational performance of a large enterprise.

  17. Methodological foundations of target market enterprise orientation

    OpenAIRE

    N.V. Karpenko

    2012-01-01

    In the article the author determines the importance of target market orientation maintenance which content is based on marketing principles and envisages the interrelationship of market segmentation processes and positioning. Proposed methodological principles of segmentation implementation are the result of the authors own research, and the process of positioning is examined through the five-level system that contains three stages and two variants of organizational behavior.

  18. An overall methodology for reliability prediction of mechatronic systems design with industrial application

    International Nuclear Information System (INIS)

    Habchi, Georges; Barthod, Christine

    2016-01-01

    We propose in this paper an overall ten-step methodology dedicated to the analysis and quantification of reliability during the design phase of a mechatronic system, considered as a complex system. The ten steps of the methodology are detailed according to the downward side of the V-development cycle usually used for the design of complex systems. Two main phases of analysis are complementary and cover the ten steps, qualitative analysis and quantitative analysis. The qualitative phase proposes to analyze the functional and dysfunctional behavior of the system and then determine its different failure modes and degradation states, based on external and internal functional analysis, organic and physical implementation, and dependencies between components, with consideration of customer specifications and mission profile. The quantitative phase is used to calculate the reliability of the system and its components, based on the qualitative behavior patterns, and considering data gathering and processing and reliability targets. Systemic approach is used to calculate the reliability of the system taking into account: the different technologies of a mechatronic system (mechanics, electronics, electrical .), dependencies and interactions between components and external influencing factors. To validate the methodology, the ten steps are applied to an industrial system, the smart actuator of Pack'Aero Company. - Highlights: • A ten-step methodology for reliability prediction of mechatronic systems design. • Qualitative and quantitative analysis for reliability evaluation using PN and RBD. • A dependency matrix proposal, based on the collateral and functional interactions. • Models consider mission profile, deterioration, interactions and influent factors. • Application and validation of the methodology on the “Smart Actuator” of PACK’AERO.

  19. An Efficient Power Estimation Methodology for Complex RISC Processor-based Platforms

    OpenAIRE

    Rethinagiri , Santhosh Kumar; Ben Atitallah , Rabie; Dekeyser , Jean-Luc; Niar , Smail; Senn , Eric

    2012-01-01

    International audience; In this contribution, we propose an efficient power estima- tion methodology for complex RISC processor-based plat- forms. In this methodology, the Functional Level Power Analysis (FLPA) is used to set up generic power models for the different parts of the system. Then, a simulation framework based on virtual platform is developed to evalu- ate accurately the activities used in the related power mod- els. The combination of the two parts above leads to a het- erogeneou...

  20. Methodology for an economic valuation of the mineral resources of Colombia

    International Nuclear Information System (INIS)

    Franco Sepulveda, Giovanni

    2007-01-01

    The present article presents a synthesis of the project of investigation; Methodology for an economic valuation of the mineral resources of Colombia, whose objective is the of proposing a methodology, specifically for the calcareous and coal deposits, like a tool for its administration, planning, regulation and control that it can be applied to the generality of the non renewable resources with the end to insert them in the states of national accounts in the long term

  1. Analysis of Combined Data from Heterogeneous Study Designs: A Methodological Proposal from the Patient Navigation Research program

    Science.gov (United States)

    Roetzheim, Richard G.; Freund, Karen M.; Corle, Don K.; Murray, David M.; Snyder, Frederick R.; Kronman, Andrea C.; Jean-Pierre, Pascal; Raich, Peter C.; Holden, Alan E. C.; Darnell, Julie S.; Warren-Mears, Victoria; Patierno, Steven; Design, PNRP; Committee, Analysis

    2013-01-01

    Background The Patient Navigation Research Program (PNRP) is a cooperative effort of nine research projects, each employing its own unique study design. To evaluate projects such as PNRP, it is desirable to perform a pooled analysis to increase power relative to the individual projects. There is no agreed upon prospective methodology, however, for analyzing combined data arising from different study designs. Expert opinions were thus solicited from members of the PNRP Design and Analysis Committee Purpose To review possible methodologies for analyzing combined data arising from heterogeneous study designs. Methods The Design and Analysis Committee critically reviewed the pros and cons of five potential methods for analyzing combined PNRP project data. Conclusions were based on simple consensus. The five approaches reviewed included: 1) Analyzing and reporting each project separately, 2) Combining data from all projects and performing an individual-level analysis, 3) Pooling data from projects having similar study designs, 4) Analyzing pooled data using a prospective meta analytic technique, 5) Analyzing pooled data utilizing a novel simulated group randomized design. Results Methodologies varied in their ability to incorporate data from all PNRP projects, to appropriately account for differing study designs, and in their impact from differing project sample sizes. Limitations The conclusions reached were based on expert opinion and not derived from actual analyses performed. Conclusions The ability to analyze pooled data arising from differing study designs may provide pertinent information to inform programmatic, budgetary, and policy perspectives. Multi-site community-based research may not lend itself well to the more stringent explanatory and pragmatic standards of a randomized controlled trial design. Given our growing interest in community-based population research, the challenges inherent in the analysis of heterogeneous study design are likely to become

  2. A New Methodology for 3D Target Detection in Automotive Radar Applications

    Directory of Open Access Journals (Sweden)

    Fabio Baselice

    2016-04-01

    Full Text Available Today there is a growing interest in automotive sensor monitoring systems. One of the main challenges is to make them an effective and valuable aid in dangerous situations, improving transportation safety. The main limitation of visual aid systems is that they do not produce accurate results in critical visibility conditions, such as in presence of rain, fog or smoke. Radar systems can greatly help in overcoming such limitations. In particular, imaging radar is gaining interest in the framework of Driver Assistance Systems (DAS. In this manuscript, a new methodology able to reconstruct the 3D imaged scene and to detect the presence of multiple targets within each line of sight is proposed. The technique is based on the use of Compressive Sensing (CS theory and produces the estimation of multiple targets for each line of sight, their range distance and their reflectivities. Moreover, a fast approach for 2D focus based on the FFT algorithm is proposed. After the description of the proposed methodology, different simulated case studies are reported in order to evaluate the performances of the proposed approach.

  3. Stage of GAN (Grupo de Analise do Nucleo) calculus methodology

    International Nuclear Information System (INIS)

    Silva, C.F. da.

    1987-11-01

    This Technical Note presents the stage of GAN Calculus Methodology in areas of Neutronics, Fuel Rod Performance and Fission Products Inventory. Proposals of GAN's members are presented and analyzed for each of these areas and a work schedule is established. (author)

  4. A Methodology for Mapping Meanings in Text-Based Sustainability Communication

    Directory of Open Access Journals (Sweden)

    Mark Brown

    2013-06-01

    Full Text Available In moving society towards more sustainable forms of consumption and production, social learning must play an important role. Making the assumption that it occurs as a consequence of changes in understanding, this article presents a methodology for mapping meanings in sustainability communication texts. The methodology uses techniques from corpus linguistics and framing theory. Two large databases of text were constructed by copying material down from the websites of two different groups of social actors: (i environmental NGOs and (ii British green business, and saving it as .txt files. The findings on individual words show that the NGOs and business use them very differently. Focusing on words expressing concern for the natural environment, it is proposed that the two actors also conceptualize their concern differently. Green business’s cognitive system of concern has two well-developed frames; good intentions and risk management. However, three frames—concern for the natural environment, perception of the damage, and responsibility, are light on detail. In contrast, within the NGOs’ system of concern, the frames of concern for the natural environment, perception of the damage and responsibility, contain words making detailed representations.

  5. Two Stage Fuzzy Methodology to Evaluate the Credit Risks of Investment Projects

    OpenAIRE

    O. Badagadze; G. Sirbiladze; I. Khutsishvili

    2014-01-01

    The work proposes a decision support methodology for the credit risk minimization in selection of investment projects. The methodology provides two stages of projects’ evaluation. Preliminary selection of projects with minor credit risks is made using the Expertons Method. The second stage makes ranking of chosen projects using the Possibilistic Discrimination Analysis Method. The latter is a new modification of a well-known Method of Fuzzy Discrimination Analysis.

  6. IRSN methodological guide to conducting workplace studies in compliance with French regulations

    International Nuclear Information System (INIS)

    Donadille, L.; Rehel, J. L.; Deligne, J. M.; Queinnec, F.; Aubert, B.; Bottollier-Depois, J. F.; Clairand, I.; Jourdain, J. R.; Rannou, A.

    2007-01-01

    Under French regulations governing radiation protection of workers, dosimetric workplace studies are mandatory. However, their practical implementation is not described. IRSN has developed a guide to help stakeholders in the radiological protection of workers conduct such studies. It proposes a general methodology applicable to most cases and 'workplace sheets', which apply this methodology to specific occupational settings. At present, two sheets are available: Conventional radiology and interventional radiology. (authors)

  7. Methodological proposal for validation of the disinfecting efficacy of an automated flexible endoscope reprocessor.

    Science.gov (United States)

    Graziano, Kazuko Uchikawa; Pereira, Marta Elisa Auler; Koda, Elaine

    2016-08-08

    to elaborate and apply a method to assess the efficacy of automated flexible endoscope reprocessors at a time when there is not an official method or trained laboratories to comply with the requirements described in specific standards for this type of health product in Brazil. the present methodological study was developed based on the following theoretical references: International Organization for Standardization (ISO) standard ISO 15883-4/2008 and Brazilian Health Surveillance Agency (Agência Nacional de Vigilância Sanitária - ANVISA) Collegiate Board Resolution (Resolução de Diretoria Colegiada - RDC) no. 35/2010 and 15/2012. The proposed method was applied to a commercially available device using a high-level 0.2% peracetic acid-based disinfectant. the proposed method of assessment was found to be robust when the recommendations made in the relevant legislation were incorporated with some adjustments to ensure their feasibility. Application of the proposed method provided evidence of the efficacy of the tested equipment for the high-level disinfection of endoscopes. the proposed method may serve as a reference for the assessment of flexible endoscope reprocessors, thereby providing solid ground for the purchase of this category of health products. propor e aplicar um método para a avaliação da eficácia de processadoras automáticas de endoscópios flexíveis, em um momento em que ainda não existe no Brasil um método oficial, nem tampouco laboratórios capacitados que contemplem os requisitos das normas específicas aplicáveis a esse tipo de produto para a saúde. caracterizou-se como pesquisa metodológica e foi desenvolvido com base em três referenciais teóricos: norma técnica International Organization for Standardization (ISO) - ISO 15883-4/2008, Resolução de Diretoria Colegiada (RDC) nº35/2010 e RDC nº15/2012 da Agência Nacional de Vigilância Sanitária (ANVISA). Aplicou-se o método proposto em um equipamento espec

  8. Development of Management Methodology for Engineering Production Quality

    Science.gov (United States)

    Gorlenko, O.; Miroshnikov, V.; Borbatc, N.

    2016-04-01

    The authors of the paper propose four directions of the methodology developing the quality management of engineering products that implement the requirements of new international standard ISO 9001:2015: the analysis of arrangement context taking into account stakeholders, the use of risk management, management of in-house knowledge, assessment of the enterprise activity according to the criteria of effectiveness

  9. New quickest transient detection methodology. Nuclear engineering applications

    International Nuclear Information System (INIS)

    Wang, Xin; Jevremovic, Tatjana; Tsoukalas, Lefteri H.

    2003-01-01

    A new intelligent systems methodology for quickest online transient detection is presented. Based on information that includes, but is not limited to, statistical features, energy of frequency components and wavelet coefficients, the new methodology decides whether a transient has emerged. A fuzzy system makes the final decision, the membership functions of which are obtained by artificial neural networks and adjusted in an online manner. Comparisons are performed with conventional methods for transient detection using simulated and plant data. The proposed methodology could be useful in power plant operations, diagnostic and maintenance activities. It is also considered as a design tool for quick design modifications in a virtual design environment aimed at next generation University Research and Training Reactors (URTRs). (The virtual design environment is pursued as part of the Big-10 Consortium sponsored by the new Innovations in Nuclear Infrastructure and Education (INIE) program sponsored by the US Department of Energy.) (author)

  10. Services for People Innovation Park – Planning Methodologies

    Directory of Open Access Journals (Sweden)

    Maria Angela Campelo de Melo

    2013-04-01

    Full Text Available This article aims to identify appropriate methodologies for the planning of a Services for People Innovation Park-SPIP, designed according to the model proposed by the Ibero-American Network launched by La Salle University of Madrid. Projected to form a network, these parks were conceived to provoke social change in their region, improving quality of life and social welfare, through knowledge, technology and innovation transfer and creation of companies focused on developing product and services to reduce social inequalities. Building a conceptual framework for the identification of planning methodologies compatible with the SPIP problemátique, this article analyses the theories of complex systems and adaptive planning, considering the particularities presented by Innovation Parks. The study deepens the understanding of the problems inherent in park planning, identifies the key issues to be considered during this process, and characterizes the SPIP as active adaptive complex system, suggesting methodologies more appropriate to its planning.

  11. Risk assessment methodology for Hanford high-level waste tanks

    International Nuclear Information System (INIS)

    Bott, T.F.; Mac Farlane, D.R.; Stack, D.W.; Kindinger, J.

    1992-01-01

    A methodology is presented for applying Probabilistic Safety Assessment techniques to quantification of the health risks posed by the high-level waste (HLW) underground tanks at the Department of Energy's Hanford reservation. This methodology includes hazard screening development of a list of potential accident initiators, systems fault trees development and quantification, definition of source terms for various release categories, and estimation of health consequences from the releases. Both airborne and liquid pathway releases to the environment, arising from aerosol and spill/leak releases from the tanks, are included in the release categories. The proposed methodology is intended to be applied to a representative subset of the total of 177 tanks, thereby providing a baseline risk profile for the HLW tank farm that can be used for setting clean-up/remediation priorities. Some preliminary results are presented for Tank 101-SY

  12. Assessment of an isolation condenser performance in case of a LOHS using the RMPS+ Methodology

    International Nuclear Information System (INIS)

    Giménez, M; Mezio, F.; Zanocco, P.; Lorenzo, G.

    2011-01-01

    Conclusions: • It has been observed that in the original RMPS proposal the response surface may be poorly built, and therefore the system reliability. • The methodology was improved by means of an iterative process in order to build a response surface with new performance indicator values in the boundary failure domain, obtained trough the plant model. • The proposed methodology was useful: – To identify efficiently “odd events”; – To rank the influence of the parameters with uncertainties; – To estimate CAREM-like PRHRS “functional reliability” to verify a design criterion

  13. Incorporation of vision of social and environmental responsibility in oil sector business: a methodological proposal; Incorporacao da visao da responsabilidade socioambiental em negocios da area de petroleo: uma proposta metodologica

    Energy Technology Data Exchange (ETDEWEB)

    Barata, Martha Macedo de Lima [Instituto Oswaldo Cruz (IOC/FIOCRUZ), Rio de Janeiro, RJ (Brazil); Monteiro, Aline Guimaraes [Centro Federal de Educacao Tecnologica Celso Sukow da Fonseca (CEFET-RJ), Rio de Janeiro, RJ (Brazil); Sousa, Denise da Silva de; Schaffel, Silvia Blajberg [Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Lab. Interdisciplinar de Meio Ambiente (LIMA); La Rovere, Emilio Lebre [Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Planejamento Energetico

    2008-07-01

    The history of the oil industry is marked by environmental accidents, characterizing it as potentially polluter. In parallel is growing the pressure of the society, for a more responsible performance from the oil companies. In reply, the oil industry is adopting managing systems aiming to manage its environmental and social impacts. It is expected that in a first moment, the oil companies controls its social and environmental risks, for what this methodology was developed. This proposal supports the oil companies to incorporate the social and environmental variables into the economic dimension of their business, using a set of indicators. Allowing to analyze the possible influence of the business on the internal and external quality. More than analyze, making possible to prioritize a sustainable business. The application of this methodology will prevent additional costs that could be spent for those companies that did not consider the environmental and social costs of their business, and contributes also to facilitate the communication between the companies and their stakeholders. (author)

  14. Methodology for a thermal analysis of a proposed SFR transport cask with the thermal code SYRTHES

    International Nuclear Information System (INIS)

    Peniguel, C.; Rupp, I.; Schneider, J. P.

    2010-01-01

    Fast reactors with liquid metal coolant have received a renewed interest owing to the need of a more efficient usage of the primary uranium resources, and they are one of the proposal for the next Generation IV. In the framework of the 2006 French law on sustainable management of radioactive materials and waste, an evaluation of the industrial perspectives of minor actinides transmutation advantages and drawbacks in Generation IV fast spectrum reactors system is requested for 2012. The CEA is in charge of studying the global problem, but on some aspects, EDF is interested to do its own exploratory studies. Among other points, transport is seen as important for the nuclear industry, to link points of production and treatment. Nuclear fuel is generally transported in thick walled rail or truck casks. These packages are designed to provide confinement, shielding and criticality protection during normal and severe transport conditions. Heat generated within the fuel (and a contribution of solar heating) makes the package becoming quite hot, but one must demonstrate that the cladding temperature does not exceed a long term temperature limit during normal transport. This paper presents a thermal study done on a package in which 9 SFR assemblies are included. Each of them is of hexagonal shape and contains 271 fuel pins. The approach followed for these calculations is to rely on an explicit representation of all pins. For these calculations a 2D analysis is performed thanks to the thermal code SYRTHES. Conduction is solved thanks to a finite element method, while thermal radiation is handled through a radiosity approach. The main aim of this paper is to present a possible numerical methodology to handle the thermal problem. (authors)

  15. Methodology for the evaluation process in the director´s preparation from education.

    Directory of Open Access Journals (Sweden)

    Humberto Clemente Calderón Echevarría

    2014-03-01

    Full Text Available The presented work proposes a methodology oriented to the evaluation of the process of director´s preparation which may contribute to the improvement of the program. It explains the need of the evaluation, activity as such, indicators to evaluate, methods and techniques to be used and the steps in which have to be done. Until now doesn´t exist a methodology which can evaluate the process of directors’ preparation in the educational sector. The development of this methodology has as a background the result obtained by means of different investigations made in the Provincial Post Office and that later were applied in the Provincial Department of Education. Nowadays is perfected in the Pedagogical University "Capitán Silverio Blanco Núñez", thus, the employment opportunities in similar processes of other entities. In the proposed methodology is conceived that the process evaluation of the director’s preparation flows out in a cyclical manner, continuous, flexible, and interactive, away from the traditional linear formula, rigid and schematic. From the above idea it can be identify four stages, and the relevant procedures, the evaluation of the process of directors’ preparation in education.

  16. The Typology of Methodological Approaches to Development of Innovative Clusters

    Directory of Open Access Journals (Sweden)

    Farat Olexandra V.

    2017-06-01

    Full Text Available The aim of the article is to study the existing methodological approaches to assessing the development of enterprises for further substantiation of possibilities of their using by cluster associations. As a result of research, based on the analysis of scientific literature, the most applicable methodological approaches to assessing the development of enterprises are characterized. 8 methodical approaches to assessing the level of development of enterprises and 4 methodological approaches to assessing the level of development of clusters are singled out. Each of the approaches is characterized by the presence of certain advantages and disadvantages, but none of them allows to obtain a systematic assessment of all areas of cluster functioning, identify possible reserves for cluster competitiveness growth and characterize possible strategies for their future development. Taking into account peculiarities of the functioning and development of cluster associations of enterprises, we propose our own methodological approach for assessing the development of innovative cluster structures.

  17. Risk analysis within environmental impact assessment of proposed construction activity

    Energy Technology Data Exchange (ETDEWEB)

    Zeleňáková, Martina; Zvijáková, Lenka

    2017-01-15

    Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

  18. Risk analysis within environmental impact assessment of proposed construction activity

    International Nuclear Information System (INIS)

    Zeleňáková, Martina; Zvijáková, Lenka

    2017-01-01

    Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

  19. Challenges in dental statistics: survey methodology topics

    OpenAIRE

    Pizzo, Giuseppe; Milani, Silvano; Spada, Elena; Ottolenghi, Livia

    2013-01-01

    This paper gathers some contributions concerning survey methodology in dental research, as discussed during the first Workshop of the SISMEC STATDENT working group on statistical methods and applications in dentistry, held in Ancona on the 28th September 2011.The first contribution deals with the European Global Oral Health Indicators Development (EGOHID) Project which proposed a comprehensive and standardized system of epidemiological tools (questionnaires and clinical forms) for national da...

  20. Methodological approach to organizational performance improvement process

    Directory of Open Access Journals (Sweden)

    Marin Buble

    2001-01-01

    Full Text Available Organizational performance improvement is one of the fundamental enterprise tasks. This especially applies to the case when the term “performance improvement” implies efficiency improvement measured by indicators, such as ROI, ROE, ROA, or ROVA/ROI. Such tasks are very complex, requiring implementation by means of project management. In this paper, the authors propose a methodological approach to improving the organizational performance of a large enterprise.

  1. Competence development organizations in project management on the basis of genomic model methodologies

    OpenAIRE

    Бушуев, Сергей Дмитриевич; Рогозина, Виктория Борисовна; Ярошенко, Юрий Федерович

    2013-01-01

    The matrix technology for identification of organisational competencies in project management is presented in the article. Matrix elements are the components of organizational competence in the field of project management and project management methodology represented in the structure of the genome. The matrix model of competence in the framework of the adopted methodologies and scanning method for identifying organizational competences formalised. Proposed methods for building effective proj...

  2. Go-flow: a reliability analysis methodology applicable to piping system

    International Nuclear Information System (INIS)

    Matsuoka, T.; Kobayashi, M.

    1985-01-01

    Since the completion of the Reactor Safety Study, the use of probabilistic risk assessment technique has been becoming more widespread in the nuclear community. Several analytical methods are used for the reliability analysis of nuclear power plants. The GO methodology is one of these methods. Using the GO methodology, the authors performed a reliability analysis of the emergency decay heat removal system of the nuclear ship Mutsu, in order to examine its applicability to piping systems. By this analysis, the authors have found out some disadvantages of the GO methodology. In the GO methodology, the signal is on-to-off or off-to-on signal, therefore the GO finds out the time point at which the state of a system changes, and can not treat a system which state changes as off-on-off. Several computer runs are required to obtain the time dependent failure probability of a system. In order to overcome these disadvantages, the authors propose a new analytical methodology: GO-FLOW. In GO-FLOW, the modeling method (chart) and the calculation procedure are similar to those in the GO methodology, but the meaning of signal and time point, and the definitions of operators are essentially different. In the paper, the GO-FLOW methodology is explained and two examples of the analysis by GO-FLOW are given

  3. 78 FR 12334 - Proposed Collection; Comment Request: Federal Interagency Traumatic Brain Injury Research (FITBIR...

    Science.gov (United States)

    2013-02-22

    ... publish periodic summaries of proposed projects to be submitted to the Office of Management and Budget... Act of 1995, for opportunity for public comment on proposed data collection projects, the National... proposed collection of information, including the validity of the methodology and assumptions used; (3) The...

  4. Hipnose e dor: proposta de metodologia clínica e qualitativa de estudo Hypnosis and pain: proposal of a clinical and qualitative research methodology

    Directory of Open Access Journals (Sweden)

    Maurício da Silva Neubern

    2009-08-01

    Full Text Available O presente trabalho visa apresentar uma proposta metodológica clínica e qualitativa para o estudo da relação entre hipnose e dor. Inicialmente, critica-se a pretensão de atribuir legitimidade científica exclusivamente para propostas estatísticas sobre o tema. Em seguida, são destacados alguns pressupostos da metodologia clínica e qualitativa, como a construção da realidade e das informações, as dimensões estética e técnica da relação terapêutica e a concepção da dor enquanto processo subjetivo. Uma vinheta clínica é utilizada de forma ilustrativa de modo a destacar as etapas e processos da pesquisa, como o uso dos registros e os processos interpretativos. Conclui-se o artigo ressaltando que a pertinência dessa metodologia se dá, basicamente, por abordar a dimensão subjetiva da relação entre dor e hipnose e por conceber o contexto como um conjunto de processos que não devem ser isolados, mas integrados à pesquisa.The purpose of this work is to present a proposal of clinical and qualitative methodology for the study of the relationship between hypnosis and pain. Initially, the pretension of attributing scientific legitimacy exclusively to statistical approaches on the theme is criticized. Then, some premises of the clinical and qualitative methodology are underlined, such as the construction of reality and information, esthetic and technical dimensions of therapeutic relationship and conception of pain as a subjective process. An illustrative clinical vignette is used so as to highlight the steps and processes of the research, such as the use of records and interpretative processes. The article is concluded emphasizing that the pertinence of this methodology is, basically, on its approach of relationship subjective dimension between pain and hypnosis and in its conceiving of the context as a set of processes that should not be isolated, but integrated into the research.

  5. A tax proposal for a cash flow corporate tax

    OpenAIRE

    Lourdes Jerez Barroso; Joaquín Texeira Quirós

    2013-01-01

    Purpose: Due to its advantages in terms of neutrality and simplicity, the aim of this paper is to design a tax base for corporation cash flows, as well as to develop its practical implementation.Design/Methodology: The conceptual aspects and the background of tax on corporation tax flows are reviewed and a tax base that levies a charge on the corporation’s economical activities’ cash flow is then proposed. In order to carry this out, a methodological procedure is developed on the basis of the...

  6. A Practical Risk Assessment Methodology for Safety-Critical Train Control Systems

    Science.gov (United States)

    2009-07-01

    This project proposes a Practical Risk Assessment Methodology (PRAM) for analyzing railroad accident data and assessing the risk and benefit of safety-critical train control systems. This report documents in simple steps the algorithms and data input...

  7. Establishment of Assessment Methodology Improvement of IAEA INPRO Proliferation Resistance

    Energy Technology Data Exchange (ETDEWEB)

    Park, J. H.; Yang, M. S.; Song, K. C.; Ko, W. I.; Kim, H. D.; Kim, Y. I.; Rhee, B. W.; Kim, H. T.

    2008-03-15

    For the development of assessment methodology of acquisition and diversion pathway of nuclear material, the PR assessment methodology which has been developed by GEN-IV PR and PP group was reviewed regarding the acquisition and diversion pathway of nuclear material and we proposed the research areas to develop the model of acquisition and diversion pathway of nuclear material including misuse of fuel cycle facilities and one of the IAEA INPRO CRPs which is aiming to develop its model. From the present study, its preliminary model for acquisition and diversion pathway of nuclear material was obtained. For preliminary evaluation of DUPIC system using methodology of acquisition/diversion pathway of nm and review of pyro-processing system characteristics, the research direction and work procedure was established to develop the assessment methodology of User Requirement 4 of INPRO PR by; 1) selection of the possible pathway to acquire and divert the nuclear material of DUPIC system, 2) the analysis of selected pathway, 3) the development of the assessment methodology of robustness and multiplicity of an INS. And, the PR characteristics and process/material flow analysis of the Pyro-processing system were preliminarily studied. For establishment of R and D direction for an INS and supporting international cooperation research, the collaborative research project titled as 'Acquisition and Diversion pathway analysis of Proliferation Resistance' as one of activities of IAEA INPRO was proposed, since Korean Government decided to actively support the IAEA INPRO. In order to review and clarify the Terms of Reference (TOR) of a Korean Proposed Collaborative Project (ROK1), two INPRO Consultancy Meetings were held. Its results were presented at two INPRO Steering Committees and the finalized TOR of Korean Proposal submit the 12-th INPRO Steering Committee Meeting which was held Dec. 3-5 2007. Four participants including USA, Canada, China and European Community (EC

  8. Establishment of Assessment Methodology Improvement of IAEA INPRO Proliferation Resistance

    International Nuclear Information System (INIS)

    Park, J. H.; Yang, M. S.; Song, K. C.; Ko, W. I.; Kim, H. D.; Kim, Y. I.; Rhee, B. W.; Kim, H. T.

    2008-03-01

    For the development of assessment methodology of acquisition and diversion pathway of nuclear material, the PR assessment methodology which has been developed by GEN-IV PR and PP group was reviewed regarding the acquisition and diversion pathway of nuclear material and we proposed the research areas to develop the model of acquisition and diversion pathway of nuclear material including misuse of fuel cycle facilities and one of the IAEA INPRO CRPs which is aiming to develop its model. From the present study, its preliminary model for acquisition and diversion pathway of nuclear material was obtained. For preliminary evaluation of DUPIC system using methodology of acquisition/diversion pathway of nm and review of pyro-processing system characteristics, the research direction and work procedure was established to develop the assessment methodology of User Requirement 4 of INPRO PR by; 1) selection of the possible pathway to acquire and divert the nuclear material of DUPIC system, 2) the analysis of selected pathway, 3) the development of the assessment methodology of robustness and multiplicity of an INS. And, the PR characteristics and process/material flow analysis of the Pyro-processing system were preliminarily studied. For establishment of R and D direction for an INS and supporting international cooperation research, the collaborative research project titled as 'Acquisition and Diversion pathway analysis of Proliferation Resistance' as one of activities of IAEA INPRO was proposed, since Korean Government decided to actively support the IAEA INPRO. In order to review and clarify the Terms of Reference (TOR) of a Korean Proposed Collaborative Project (ROK1), two INPRO Consultancy Meetings were held. Its results were presented at two INPRO Steering Committees and the finalized TOR of Korean Proposal submit the 12-th INPRO Steering Committee Meeting which was held Dec. 3-5 2007. Four participants including USA, Canada, China and European Community (EC) have decided

  9. Propuesta Metodológica del Entrenamiento de la Resistencia en Baloncesto mediante la Modificación de Factores Formales y Estructurales del Juego. [Methodological Proposals for Endurance Training in Basketball by Modifying Structural and Formal Aspects of the Game].

    Directory of Open Access Journals (Sweden)

    Arnau Sacot

    2017-10-01

    heart rate and game intensity depending on the game parameters used during the game situation. Different key words such as conditioning and basketball in different data bases such as Pub Med or ISI web of knowledge were checked throughout the selection process. Finally, 12 articles were included in the review showing that the modification of some game parameters such as number of players, space conditions, time aspects and game rules, can influence the orientation of the endurance training in basketball. Thereby, a methodological proposal was created to illustrate the usefulness of the different game parameters in order to control and plan the endurance training integrated with technical and tactical drills in basketball. However, the background studies of the methodological proposal should be considered since these studies only have analyzed the simple effects of the different parameters and due to the fact, future studies should study the interaction of the different parameters in order to validate the proposal. Nevertheless, it is believed that this methodological proposal can be helpful so as to integrate endurance training with technical and tactical drills.

  10. Soviet-designed pressurized water reactor symptomatic emergency operating instruction analytical procedure: approach, methodology, development and application

    International Nuclear Information System (INIS)

    Beelman, R.J.

    1999-01-01

    A symptom approach to the analytical validation of symptom-based EOPs includes: (1) Identification of critical safety functions to the maintenance of fission product barrier integrity; (2) Identification of the symptoms which manifest an impending challenge to critical safety function maintenance; (3) Development of a symptomatic methodology to delineate bounding plant transient response modes; (4) Specification of bounding scenarios; (5) Development of a systematic calculational approach consistent with the objectives of the methodology; (6) Performance of thermal-hydraulic computer code calculations implementing the analytical methodology; (7) Interpretation of the analytical results on the basis of information available to the operator; (8) Application of the results to the validation of the proposed operator actions; (9) Production of a technical basis document justifying the proposed operator actions. (author)

  11. Computerized methodology for micro-CT and histological data inflation using an IVUS based translation map.

    Science.gov (United States)

    Athanasiou, Lambros S; Rigas, George A; Sakellarios, Antonis I; Exarchos, Themis P; Siogkas, Panagiotis K; Naka, Katerina K; Panetta, Daniele; Pelosi, Gualtiero; Vozzi, Federico; Michalis, Lampros K; Parodi, Oberdan; Fotiadis, Dimitrios I

    2015-10-01

    A framework for the inflation of micro-CT and histology data using intravascular ultrasound (IVUS) images, is presented. The proposed methodology consists of three steps. In the first step the micro-CT/histological images are manually co-registered with IVUS by experts using fiducial points as landmarks. In the second step the lumen of both the micro-CT/histological images and IVUS images are automatically segmented. Finally, in the third step the micro-CT/histological images are inflated by applying a transformation method on each image. The transformation method is based on the IVUS and micro-CT/histological contour difference. In order to validate the proposed image inflation methodology, plaque areas in the inflated micro-CT and histological images are compared with the ones in the IVUS images. The proposed methodology for inflating micro-CT/histological images increases the sensitivity of plaque area matching between the inflated and the IVUS images (7% and 22% in histological and micro-CT images, respectively). Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Six methodological steps to build medical data warehouses for research

    NARCIS (Netherlands)

    Szirbik, N. B.; Pelletier, C.; Chaussalet, T.; Chaussalet, 27629

    Purpose: We propose a simple methodology for heterogeneous data collection and central repository-style database design in healthcare. Our method can be used with or without other software development frameworks, and we argue that its application can save a relevant amount of implementation effort.

  13. Improved best estimate plus uncertainty methodology including advanced validation concepts to license evolving nuclear reactors

    International Nuclear Information System (INIS)

    Unal, Cetin; Williams, Brian; McClure, Patrick; Nelson, Ralph A.

    2010-01-01

    cost saving purposes by showing further testing wold not enhance the quality of the validation of predictive tools. The proposed methodology is at a conceptual level. When matured and if considered favorably by the stakeholders, it could serve as a new framework for the next generation of the best estimate plus uncertainty licensing methodology that USNRC developed previously. In order to come to that level of maturity it is necessary to communicate the methodology to scientific, design and regulatory stakeholders for discussion and debates. This paper is the first step to establish this communication.

  14. Improved best estimate plus uncertainty methodology including advanced validation concepts to license evolving nuclear reactors

    Energy Technology Data Exchange (ETDEWEB)

    Unal, Cetin [Los Alamos National Laboratory; Williams, Brian [Los Alamos National Laboratory; Mc Clure, Patrick [Los Alamos National Laboratory; Nelson, Ralph A [IDAHO NATIONAL LAB

    2010-01-01

    saving purposes by showing further testing wold not enhance the quality of the validation of predictive tools. The proposed methodology is at a conceptual level. When matured and if considered favorably by the stakeholders, it could serve as a new framework for the next generation of the best estimate plus uncertainty licensing methodology that USNRC developed previously. In order to come to that level of maturity it is necessary to communicate the methodology to scientific, design and regulatory stakeholders for discussion and debates. This paper is the first step to establish this communication.

  15. Construction and comparison of gene co-expression networks shows complex plant immune responses

    Directory of Open Access Journals (Sweden)

    Luis Guillermo Leal

    2014-10-01

    Full Text Available Gene co-expression networks (GCNs are graphic representations that depict the coordinated transcription of genes in response to certain stimuli. GCNs provide functional annotations of genes whose function is unknown and are further used in studies of translational functional genomics among species. In this work, a methodology for the reconstruction and comparison of GCNs is presented. This approach was applied using gene expression data that were obtained from immunity experiments in Arabidopsis thaliana, rice, soybean, tomato and cassava. After the evaluation of diverse similarity metrics for the GCN reconstruction, we recommended the mutual information coefficient measurement and a clustering coefficient-based method for similarity threshold selection. To compare GCNs, we proposed a multivariate approach based on the Principal Component Analysis (PCA. Branches of plant immunity that were exemplified by each experiment were analyzed in conjunction with the PCA results, suggesting both the robustness and the dynamic nature of the cellular responses. The dynamic of molecular plant responses produced networks with different characteristics that are differentiable using our methodology. The comparison of GCNs from plant pathosystems, showed that in response to similar pathogens plants could activate conserved signaling pathways. The results confirmed that the closeness of GCNs projected on the principal component space is an indicative of similarity among GCNs. This also can be used to understand global patterns of events triggered during plant immune responses.

  16. A proposed framework for computational fluid dynamics code calibration/validation

    International Nuclear Information System (INIS)

    Oberkampf, W.L.

    1993-01-01

    The paper reviews the terminology and methodology that have been introduced during the last several years for building confidence n the predictions from Computational Fluid Dynamics (CID) codes. Code validation terminology developed for nuclear reactor analyses and aerospace applications is reviewed and evaluated. Currently used terminology such as ''calibrated code,'' ''validated code,'' and a ''validation experiment'' is discussed along with the shortcomings and criticisms of these terms. A new framework is proposed for building confidence in CFD code predictions that overcomes some of the difficulties of past procedures and delineates the causes of uncertainty in CFD predictions. Building on previous work, new definitions of code verification and calibration are proposed. These definitions provide more specific requirements for the knowledge level of the flow physics involved and the solution accuracy of the given partial differential equations. As part of the proposed framework, categories are also proposed for flow physics research, flow modeling research, and the application of numerical predictions. The contributions of physical experiments, analytical solutions, and other numerical solutions are discussed, showing that each should be designed to achieve a distinctively separate purpose in building confidence in accuracy of CFD predictions. A number of examples are given for each approach to suggest methods for obtaining the highest value for CFD code quality assurance

  17. Validating agent oriented methodology (AOM) for netlogo modelling and simulation

    Science.gov (United States)

    WaiShiang, Cheah; Nissom, Shane; YeeWai, Sim; Sharbini, Hamizan

    2017-10-01

    AOM (Agent Oriented Modeling) is a comprehensive and unified agent methodology for agent oriented software development. AOM methodology was proposed to aid developers with the introduction of technique, terminology, notation and guideline during agent systems development. Although AOM methodology is claimed to be capable of developing a complex real world system, its potential is yet to be realized and recognized by the mainstream software community and the adoption of AOM is still at its infancy. Among the reason is that there are not much case studies or success story of AOM. This paper presents two case studies on the adoption of AOM for individual based modelling and simulation. It demonstrate how the AOM is useful for epidemiology study and ecological study. Hence, it further validate the AOM in a qualitative manner.

  18. Methodology of external exposure calculation for reuse of conditional released materials from decommissioning - 59138

    International Nuclear Information System (INIS)

    Ondra, Frantisek; Vasko, Marek; Necas, Vladimir

    2012-01-01

    The article presents methodology of external exposure calculation for reuse of conditional released materials from decommissioning using VISIPLAN 3D ALARA planning tool. Production of rails has been used as an example application of proposed methodology within the CONRELMAT project. The article presents a methodology for determination of radiological, material, organizational and other conditions for conditionally released materials reuse to ensure that workers and public exposure does not breach the exposure limits during scenario's life cycle (preparation, construction and operation of scenario). The methodology comprises a proposal of following conditions in the view of workers and public exposure: - radionuclide limit concentration of conditionally released materials for specific scenarios and nuclide vectors, - specific deployment of conditionally released materials eventually shielding materials, workers and public during the scenario's life cycle, - organizational measures concerning time of workers or public stay in the vicinity on conditionally released materials for individual performed scenarios and nuclide vectors. The above mentioned steps of proposed methodology have been applied within the CONRELMAT project. Exposure evaluation of workers for rail production is introduced in the article as an example of this application. Exposure calculation using VISIPLAN 3D ALARA planning tool was done within several models. The most exposed profession for scenario was identified. On the basis of this result, an increase of radionuclide concentration in conditional released material was proposed more than two times to 681 Bq/kg without no additional safety or organizational measures being applied. After application of proposed safety and organizational measures (additional shielding, geometry changes and limitation of work duration) it is possible to increase concentration of radionuclide in conditional released material more than ten times to 3092 Bq/kg. Storage

  19. Application of a methodology for the development and validation of reliable process control software

    International Nuclear Information System (INIS)

    Ramamoorthy, C.V.; Mok, Y.R.; Bastani, F.B.; Chin, G.

    1980-01-01

    The necessity of a good methodology for the development of reliable software, especially with respect to the final software validation and testing activities, is discussed. A formal specification development and validation methodology is proposed. This methodology has been applied to the development and validation of a pilot software, incorporating typical features of critical software for nuclear power plants safety protection. The main features of the approach include the use of a formal specification language and the independent development of two sets of specifications. 1 ref

  20. A Critique for the Methodology of Scientific Research Programmes

    Directory of Open Access Journals (Sweden)

    Saeed Naji

    2009-01-01

    Full Text Available The purpose of the paper is to evaluate of Imre Lakatos' MSRP (Methodology of Scientific Research Programs. Presenting the methodology which is based on Popperian Refutationism, Lakatos intended to overcome Pluralism (, Relativism and Skepticism and distinguishes the best theory (/program in science. The question is that did the lakatos' secondary change in the form and content of MSRP -against some historical facts and criticisms- make some serious deficiencies in his methodology? The answer to this question is positive. One of Lakatos' changes in MSRP is to resort to a new concept of "rationality". Presenting a logical analysis, the paper shows that this change causes MSRP to be unable to distinguish the best program among others. Furthermore he gives a new definition of the term 'methodology'. This definition, in its turn, makes MSRP main task to be inactive.Showing the irreparable harms Lakatos' changes produce in MSRP, the paper shows that these changes not only cannot get rid of the deficiencies therein, but it is also unable to meet lakatos' original purpose for MSRP.

  1. Stakeholder analysis methodologies resource book

    Energy Technology Data Exchange (ETDEWEB)

    Babiuch, W.M.; Farhar, B.C.

    1994-03-01

    Stakeholder analysis allows analysts to identify how parties might be affected by government projects. This process involves identifying the likely impacts of a proposed action and stakeholder groups affected by that action. Additionally, the process involves assessing how these groups might be affected and suggesting measures to mitigate any adverse effects. Evidence suggests that the efficiency and effectiveness of government actions can be increased and adverse social impacts mitigated when officials understand how a proposed action might affect stakeholders. This report discusses how to conduct useful stakeholder analyses for government officials making decisions on energy-efficiency and renewable-energy technologies and their commercialization. It discusses methodological issues that may affect the validity and reliability of findings, including sampling, generalizability, validity, ``uncooperative`` stakeholder groups, using social indicators, and the effect of government regulations. The Appendix contains resource directories and a list of specialists in stakeholder analysis and involvement.

  2. Safety assessment of a borehole type disposal facility using the ISAM methodology

    International Nuclear Information System (INIS)

    Blerk, J.J. van; Yucel, V.; Kozak, M.W.; Moore, B.A.

    2002-01-01

    As part of the IAEA's Co-ordinated Research Project (CRP) on Improving Long-term of Safety Assessment Methodologies for Near Surface Waste Disposal Facilities (ISAM), three example cases were developed. The aim was to test the ISAM safety assessment methodology using as realistic as possible data. One of the Test Cases, the Borehole Test Case (BTC), related to a proposed future disposal option for disused sealed radioactive sources. This paper uses the various steps of the ISAM safety assessment methodology to describe the work undertaken by ISAM participants in developing the BTC and provides some general conclusions that can be drawn from the findings of their work. (author)

  3. Urban metabolism: A review of research methodologies

    International Nuclear Information System (INIS)

    Zhang, Yan

    2013-01-01

    Urban metabolism analysis has become an important tool for the study of urban ecosystems. The problems of large metabolic throughput, low metabolic efficiency, and disordered metabolic processes are a major cause of unhealthy urban systems. In this paper, I summarize the international research on urban metabolism, and describe the progress that has been made in terms of research methodologies. I also review the methods used in accounting for and evaluating material and energy flows in urban metabolic processes, simulation of these flows using a network model, and practical applications of these methods. Based on this review of the literature, I propose directions for future research, and particularly the need to study the urban carbon metabolism because of the modern context of global climate change. Moreover, I recommend more research on the optimal regulation of urban metabolic systems. Highlights: •Urban metabolic processes can be analyzed by regarding cities as superorganisms. •Urban metabolism methods include accounting, assessment, modeling, and regulation. •Research methodologies have improved greatly since this field began in 1965. •Future research should focus on carbon metabolism and optimal regulation. -- The author reviews research progress in the field of urban metabolism, and based on her literature review, proposes directions for future research

  4. A Negative Selection Immune System Inspired Methodology for Fault Diagnosis of Wind Turbines.

    Science.gov (United States)

    Alizadeh, Esmaeil; Meskin, Nader; Khorasani, Khashayar

    2017-11-01

    High operational and maintenance costs represent as major economic constraints in the wind turbine (WT) industry. These concerns have made investigation into fault diagnosis of WT systems an extremely important and active area of research. In this paper, an immune system (IS) inspired methodology for performing fault detection and isolation (FDI) of a WT system is proposed and developed. The proposed scheme is based on a self nonself discrimination paradigm of a biological IS. Specifically, the negative selection mechanism [negative selection algorithm (NSA)] of the human body is utilized. In this paper, a hierarchical bank of NSAs are designed to detect and isolate both individual as well as simultaneously occurring faults common to the WTs. A smoothing moving window filter is then utilized to further improve the reliability and performance of the FDI scheme. Moreover, the performance of our proposed scheme is compared with another state-of-the-art data-driven technique, namely the support vector machines (SVMs) to demonstrate and illustrate the superiority and advantages of our proposed NSA-based FDI scheme. Finally, a nonparametric statistical comparison test is implemented to evaluate our proposed methodology with that of the SVM under various fault severities.

  5. Reference Performance Test Methodology for Degradation Assessment of Lithium-Sulfur Batteries

    DEFF Research Database (Denmark)

    Knap, Vaclav; Stroe, Daniel-Ioan; Purkayastha, Rajlakshmi

    2018-01-01

    Lithium-Sulfur (Li-S) is an emerging battery technology receiving a growing amount of attention due to its potentially high gravimetric energy density, safety, and low production cost. However, there are still some obstacles preventing its swift commercialization. Li-S batteries are driven...... by different electrochemical processes than commonly used Lithium-ion batteries, which often results in very different behavior. Therefore, the testing and modeling of these systems have to be adjusted to reflect their unique behavior and to prevent possible bias. A methodology for a Reference Performance Test...... (RPT) for the Li-S batteries is proposed in this study to point out Li-S battery features and provide guidance to users how to deal with them and possible results into standardization. The proposed test methodology is demonstrated for 3.4 Ah Li-S cells aged under different conditions....

  6. The methodological defense of realism scrutinized.

    Science.gov (United States)

    Wray, K Brad

    2015-12-01

    I revisit an older defense of scientific realism, the methodological defense, a defense developed by both Popper and Feyerabend. The methodological defense of realism concerns the attitude of scientists, not philosophers of science. The methodological defense is as follows: a commitment to realism leads scientists to pursue the truth, which in turn is apt to put them in a better position to get at the truth. In contrast, anti-realists lack the tenacity required to develop a theory to its fullest. As a consequence, they are less likely to get at the truth. My aim is to show that the methodological defense is flawed. I argue that a commitment to realism does not always benefit science, and that there is reason to believe that a research community with both realists and anti-realists in it may be better suited to advancing science. A case study of the Copernican Revolution in astronomy supports this claim. Copyright © 2015 Elsevier Ltd. All rights reserved.

  7. dRail: a novel physical layout methodology for power gated circuits

    OpenAIRE

    Mistry, Jatin N.; Biggs, John; Myers, James; Al-Hashimi, Bashir M.; Flynn, David

    2012-01-01

    In this paper we present a physical layout methodology, called dRail, to allow power gated and non-power gated cells to be placed next to each other. This is unlike traditional voltage area layout which separates cells to prevent shorting of power supplies leading to impact on area, routing and power. To implement dRail, a modified standard cell architecture and physical layout is proposed. The methodology is validated by implementing power gating on the data engine in an ARM Cortex-A5 proces...

  8. New evaluation methodology of regenerative braking contribution to energy efficiency improvement of electric vehicles

    International Nuclear Information System (INIS)

    Qiu, Chengqun; Wang, Guolin

    2016-01-01

    Highlights: • Two different contribution ratio evaluation parameters according to the deceleration braking process are proposed. • Methodologies for calculating the contribution made by regenerative brake to improve vehicle energy efficiency are proposed. • Road test results imply that the proposed parameters are effective. - Abstract: Comprehensive research is conducted on the design and control of a regenerative braking system for electric vehicles. The mechanism and evaluation methods of contribution brought by regenerative braking to improve electric vehicle’s energy efficiency are discussed and analyzed by the energy flow. Methodologies for calculating the contribution made by regenerative brake are proposed. Additionally a new regenerative braking control strategy called “serial 2 control strategy” is introduced. Moreover, two control strategies called “parallel control strategy” and “serial 1 control strategy” are proposed as the comparative control strategy. Furthermore, two different contribution ratio evaluation parameters according to the deceleration braking process are proposed. Finally, road tests are carried out under China typical city regenerative driving cycle standard with three different control strategies. The serial 2 control strategy offers considerably higher regeneration efficiency than the parallel strategy and serial 1 strategy.

  9. Assessment of compliance with regulatory requirements for a best estimate methodology for evaluation of ECCS

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Un Chul; Jang, Jin Wook; Lim, Ho Gon; Jeong, Ik [Seoul National Univ., Seoul (Korea, Republic of); Sim, Suk Ku [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    2000-03-15

    Best estimate methodology for evaluation of ECCS proposed by KEPCO(KREM) os using thermal-hydraulic best-estimate code and the topical report for the methodology is described that it meets the regulatory requirement of USNRC regulatory guide. In this research the assessment of compliance with regulatory guide. In this research the assessment of compliance with regulatory requirements for the methodology is performed. The state of licensing procedure of other countries and best-estimate evaluation methodologies of Europe is also investigated, The applicability of models and propriety of procedure of uncertainty analysis of KREM are appraised and compliance with USNRC regulatory guide is assessed.

  10. A methodology for analysing human errors of commission in accident scenarios for risk assessment

    International Nuclear Information System (INIS)

    Kim, J. H.; Jung, W. D.; Park, J. K

    2003-01-01

    As the concern on the impact of the operator's inappropriate interventions, so-called Errors Of Commissions(EOCs), on the plant safety has been raised, the interest in the identification and analysis of EOC events from the risk assessment perspective becomes increasing accordingly. To this purpose, we propose a new methodology for identifying and analysing human errors of commission that might be caused from the failures in situation assessment and decision making during accident progressions given an initiating event. The proposed methodology was applied to the accident scenarios of YGN 3 and 4 NPPs, which resulted in about 10 EOC situations that need careful attention

  11. Status of Methodology Development for the Evaluation of Proliferation Resistance

    International Nuclear Information System (INIS)

    Lee, Yong Deok; Ko, Won Il; Lee, Jung Won

    2010-01-01

    Concerning the increasing energy demand and green house effect, nuclear energy is now the most feasible option. Therefore, recently, oil countries even have a plan to build the nuclear power plant for energy production. If nuclear systems are to make a major and sustainable contribution to the worlds energy supply, future nuclear energy systems must meet specific requirements. One of the requirements is to satisfy the proliferation resistance condition in an entire nuclear system. Therefore, from the beginning of future nuclear energy system development, it is important to consider a proliferation resistance to prevent the diversion of nuclear materials. The misuse of a nuclear system must be considered as well. Moreover, in the import and export of nuclear system, the evaluation of the proliferation resistance on the nuclear system becomes a key factor The INPRO (International Project on Innovative Nuclear Reactors and Fuel Cycles) program initiated by the IAEA proposed proliferation resistance (PR) as a key component of a future innovative nuclear system (INS) with a sustainability, economics, safety of nuclear installation and waste management. The technical goal for Generation IV (Gen IV) nuclear energy systems (NESs) highlights a Proliferation Resistance and Physical Protection (PR and PP), sustainability, safety, reliability and economics as well. Based on INPRO and Gen IV study, the methodology development for the evaluation of proliferation resistance has been carried out in KAERI. Finally, the systematic procedure for methodology was setup and the indicators for the procedure were decided. The methodology involves the evaluation from total nuclear system to individual process. Therefore, in this study, the detailed procedure for the evaluation of proliferation resistance and the newly proposed additional indicators are described and several conditions are proposed to increase the proliferation resistance in the future nuclear system. The assessment of PR

  12. Assessment of Wind Turbine Structural Integrity using Response Surface Methodology

    DEFF Research Database (Denmark)

    Toft, Henrik Stensgaard; Svenningsen, Lasse; Moser, Wolfgang

    2016-01-01

    Highlights •A new approach to assessment of site specific wind turbine loads is proposed. •The approach can be applied in both fatigue and ultimate limit state. •Two different response surface methodologies have been investigated. •The model uncertainty introduced by the response surfaces...

  13. H Scan/AHP advanced technology proposal evaluation process

    Energy Technology Data Exchange (ETDEWEB)

    Mack, S. [Energetics, Inc., Columbia, MD (United States); Valladares, M.R.S. de [National Renewable Energy Lab., Washington, DC (United States)

    1996-10-01

    It is anticipated that a family of high value/impact projects will be funded by the Hydrogen Program to field test hydrogen technologies that are at advanced stages of development. These projects will add substantial value to the Program in several ways, by: demonstrating successful integration of multiple advanced technologies, providing critical insight on issues of larger scale equipment design, construction and operations management, yielding cost and performance data for competitive analysis, refining and deploying enhanced safety measures. These projects will be selected through a competitive proposal evaluation process. Because of the significant scope and funding levels of projects at these development phases, Program management has indicated the need for an augmented proposal evaluation strategy to ensure that supported projects are implemented by capable investigative teams and that their successful completion will optimally advance programmatic objectives. These objectives comprise a complex set of both quantitative and qualitative factors, many of which can only be estimated using expert judgment and opinion. To meet the above need, the National Renewable Energy Laboratory (NREL) and Energetics Inc. have jointly developed a proposal evaluation methodology called H Scan/AHP. The H Scan component of the process was developed by NREL. It is a two-part survey instrument that substantially augments the type and scope of information collected in a traditional proposal package. The AHP (Analytic Hierarchy Process) component was developed by Energetics. The AHP is an established decision support methodology that allows the Program decision makers to evaluate proposals relatively based on a unique set of weighted criteria that they have determined.

  14. Methodological challenges in retailer buying behaviour research

    DEFF Research Database (Denmark)

    Hansen, Tommy Holm; Skytte, Hans

    This paper presents a review of studies on retailer buying behaviour with focus on the methodological issues. It is argued that the researcher of retailer buying behaviour is faced with particular challenges regarding the sample frame, defining th of analysis, potentially small populations and low...... response rates, buying centres and product specific behaviour. At the end, the authors propose a descriptive research design that will try to take account of the mentioned issues....

  15. Improving the Understanding of Research Methodology and Self-Regulated Learning Through Blog Project

    OpenAIRE

    Retnawati, Heri

    2017-01-01

    : This classroom action research seeks to improve self-regulated learning (SRL) and understanding of research methodology at the graduate school. Nineteen graduate school students were involved. Using project-based learning (PjBL), students were assigned to create online blogs as the main project. The blog was intended for representing their understanding of research methodology by writing review of research articles and submitting a research proposal. The classroom action research was based ...

  16. Setting priorities for space research: An experiment in methodology

    Science.gov (United States)

    1995-01-01

    In 1989, the Space Studies Board created the Task Group on Priorities in Space Research to determine whether scientists should take a role in recommending priorities for long-term space research initiatives and, if so, to analyze the priority-setting problem in this context and develop a method by which such priorities could be established. After answering the first question in the affirmative in a previous report, the task group set out to accomplish the second task. The basic assumption in developing a priority-setting process is that a reasoned and structured approach for ordering competing initiatives will yield better results than other ways of proceeding. The task group proceeded from the principle that the central criterion for evaluating a research initiative must be its scientific merit -- the value of the initiative to the proposing discipline and to science generally. The group developed a two-stage methodology for priority setting and constructed a procedure and format to support the methodology. The first of two instruments developed was a standard format for structuring proposals for space research initiatives. The second instrument was a formal, semiquantitative appraisal procedure for evaluating competing proposals. This report makes available complete templates for the methodology, including the advocacy statement and evaluation forms, as well as an 11-step schema for a priority-setting process. From the beginning of its work, the task group was mindful that the issue of priority setting increasingly pervades all of federally supported science and that its work would have implications extending beyond space research. Thus, although the present report makes no recommendations for action by NASA or other government agencies, it provides the results of the task group's work for the use of others who may study priority-setting procedures or take up the challenge of implementing them in the future.

  17. [New methodological advances: algorithm proposal for management of Clostridium difficile infection].

    Science.gov (United States)

    González-Abad, María José; Alonso-Sanz, Mercedes

    2015-06-01

    Clostridium difficile infection (CDI) is considered the most common cause of health care-associated diarrhea and also is an etiologic agent of community diarrhea. The aim of this study was to assess the potential benefit of a test that detects glutamate dehydrogenase (GDH) antigen and C. difficile toxin A/B, simultaneously, followed by detection of C. difficile toxin B (tcdB) gene by PCR as confirmatory assay on discrepant samples, and to propose an algorithm more efficient. From June 2012 to January 2013 at Hospital Infantil Universitario Niño Jesús, Madrid, the stool samples were studied for the simultaneous detection of GDH and toxin A/B, and also for detection of toxin A/B alone. When results between GDH and toxin A/B were discordant, a single sample for patient was selected for detection of C. difficile toxin B (tcdB) gene. A total of 116 samples (52 patients) were tested. Four were positive and 75 negative for toxigenic C. difficile (Toxin A/B, alone or combined with GDH). C. difficile was detected in the remaining 37 samples but not toxin A/B, regardless of the method used, except one. Twenty of the 37 specimens were further tested for C. difficile toxin B (tcdB) gene and 7 were positive. The simultaneous detection of GDH and toxin A/B combined with PCR recovered undiagnosed cases of CDI. In accordance with our data, we propose a two-step algorithm: detection of GDH and PCR (in samples GDH positive). This algorithm could provide a superior cost-benefit ratio in our population.

  18. A risk assessment methodology for incorporating uncertainties using fuzzy concepts

    International Nuclear Information System (INIS)

    Cho, Hyo-Nam; Choi, Hyun-Ho; Kim, Yoon-Bae

    2002-01-01

    This paper proposes a new methodology for incorporating uncertainties using fuzzy concepts into conventional risk assessment frameworks. This paper also introduces new forms of fuzzy membership curves, designed to consider the uncertainty range that represents the degree of uncertainties involved in both probabilistic parameter estimates and subjective judgments, since it is often difficult or even impossible to precisely estimate the occurrence rate of an event in terms of one single crisp probability. It is to be noted that simple linguistic variables such as 'High/Low' and 'Good/Bad' have the limitations in quantifying the various risks inherent in construction projects, but only represent subjective mental cognition adequately. Therefore, in this paper, the statements that include some quantification with giving specific value or scale, such as 'Close to any value' or 'Higher/Lower than analyzed value', are used in order to get over the limitations. It may be stated that the proposed methodology will be very useful for the systematic and rational risk assessment of construction projects

  19. A methodology for including wall roughness effects in k-ε low-Reynolds turbulence models

    International Nuclear Information System (INIS)

    Ambrosini, W.; Pucciarelli, A.; Borroni, I.

    2015-01-01

    Highlights: • A model for taking into account wall roughness in low-Reynolds k-ε models is presented. • The model is subjected to a first validation to show its potential in general applications. • The application of the model in predicting heat transfer to supercritical fluids is also discussed. - Abstract: A model accounting for wall roughness effects in k-ε low-Reynolds turbulence models is described in the present paper. In particular, the introduction in the transport equations of k and ε of additional source terms related to roughness, based on simple assumptions and dimensional relationships, is proposed. An objective of the present paper, in addition to obtaining more realistic predictions of wall friction, is the application of the proposed model to the study of heat transfer to supercritical fluids. A first validation of the model is reported. The model shows the capability of predicting, at least qualitatively, some of the most important trends observed when dealing with rough pipes in very different flow conditions. Qualitative comparisons with some DNS data available in literature are also performed. Further analyses provided promising results concerning the ability of the model in reproducing the trend of friction factor when varying the flow conditions, though improvements are necessary for achieving better quantitative accuracy. First applications of the model in simulating heat transfer to supercritical fluids are also described, showing the capability of the model to affect the predictions of these heat transfer phenomena, in particular in the vicinity of the pseudo-critical conditions. A more extended application of the model to relevant deteriorated heat transfer conditions will clarify the usefulness of this modelling methodology in improving predictions of these difficult phenomena. Whatever the possible success in this particular application that motivated its development, this approach suggests a general methodology for accounting

  20. Methodology to Assess No Touch Audit Software Using Field Data

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Jie [Purdue Univ., West Lafayette, IN (United States); Braun, James E. [Purdue Univ., West Lafayette, IN (United States); Langner, M. Rois [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-10-01

    The research presented in this report builds upon these previous efforts and proposes a set of tests to assess no touch audit tools using real utility bill and on-site data. The proposed assessment methodology explicitly investigates the behaviors of the monthly energy end uses with respect to outdoor temperature, i.e., the building energy signature, to help understand the Tool's disaggregation accuracy. The project team collaborated with Field Diagnosis Services, Inc. (FDSI) to identify appropriate test sites for the evaluation.

  1. 78 FR 53763 - Proposed Collection; 60-day Comment Request Cancer Trials Support Unit (CTSU) (NCI)

    Science.gov (United States)

    2013-08-30

    ... proposed data collection projects, the National Cancer Institute (NCI), National Institutes of Health (NIH), will publish periodic summaries of proposed projects to be submitted to the Office of Management and... proposed collection of information, including the validity of the methodology and assumptions used; (3...

  2. Proposal for Implementation of Technological Resources Digital Touchscreen in Educational Environment

    Directory of Open Access Journals (Sweden)

    Francisco Jorgan Cabral Clarindo

    2016-12-01

    Full Text Available Concerned with innovation in education and the development of knowledge, educational institutions invest in advanced technologies such as touchscreen. Thus the objective of the proposed research show that there is a great lack of these resources in formal education ahead of technological advances, their influence on current teaching methodologies, models of handsets available on the market, the advantages, forms of acquisition, costs, benefits, barriers to their use in the educational environment and the need for its implementation in the educational environment. The project work included the model of the Institutional Program Initiation in Technological Development and Innovation PIBIC/IFGOIANO- 2013/2014 and had as field research unit at the Federal Institute Goiano (IFGOIANO- Campus Urutaí. The research methodology was emphasized in theoretical interpretations based bibliographic and a case study. Through inductive and deductive methods in observing technologies in the current market and society with respect to those found in this unit. Which were registered with interviews, discussions and testimonials. Actual results suggests that there is a shortage of these technologies, which are directly linked to lack of Management and Governance of Information Technology tools. The conclusion shows that the use of these tools will result in greater participation, digital inclusion and improving learning.

  3. Destination brands and website evaluation: a research methodology

    Directory of Open Access Journals (Sweden)

    J Fernández-Cavia

    2013-10-01

    Full Text Available Introduction:The World Wide Web has become the primary instrument used by tourists in order to search for information. As a result, tourism websites pertaining to destinations need to be appealing and must convey their brand image in an appropriate, effective manner. However, there is no methodology in place to assess the quality and communicative effectiveness of destination websites that is scientifically sound and universally accepted. The development of such a methodology is one of the tasks we have proposed within the framework of the research project: “New strategies for advertising and promoting Spanish tourism brands online” (CSO2008-02627, funded by the Spanish Ministry of Science and Innovation. Method: The project team have developed an interdisciplinary, all-embracing analysis template combining certain automated analyses with other qualitative and quantitative ones. The template comprises a total of 12 subject areas and 154 indicators prepared on the basis of contributions from prominent experts in each of the fields of work. This article sets out the analysis methodology drawn up and possible applications are given. Results: The primary aim of the project is to provide an assessment methodology that would make it possible to optimise destination brand websites, thus providing a tool to support the work of public tourism destination managers.

  4. Software Innovation - Values for a Methodology

    DEFF Research Database (Denmark)

    Aaen, Ivan

    2013-01-01

    Innovation is a recurrent theme in public as well as academic debate, and software development plays a major role for innovation in about every sector of our economy. As a consequence, software innovation will play an increasingly important role in software development. The focus in this paper is...... for experimentation, learning, and flexibility in software projects, but how can this change be used to facilitate software innovation? This paper proposes a set of values to guide the development of a methodology to facilitate software innovation....

  5. Heuristic Methodology for Estimating the Liquid Biofuel Potential of a Region

    Directory of Open Access Journals (Sweden)

    Dorel Dusmanescu

    2016-08-01

    Full Text Available This paper presents a heuristic methodology for estimating the possible variation of the liquid biofuel potential of a region, an appraisal made for a future period of time. The determination of the liquid biofuel potential has been made up either on the account of an average (constant yield of the energetic crops that were used, or on the account of a yield that varies depending on a known trend, which can be estimated through a certain method. The proposed methodology uses the variation of the yield of energetic crops over time in order to simulate a variation of the biofuel potential for a future ten year time period. This new approach to the problem of determining the liquid biofuel potential of a certain land area can be useful for investors, as it allows making a more realistic analysis of the investment risk and of the possibilities of recovering the investment. On the other hand, the presented methodology can be useful to the governmental administration in order to elaborate strategies and policies to ensure the necessity of fuels and liquid biofuels for transportation, in a certain area. Unlike current methods, which approach the problem of determining the liquid biofuel potential in a deterministic way, by using econometric methods, the proposed methodology uses heuristic reasoning schemes in order to reduce the great number of factors that actually influence the biofuel potential and which usually have unknown values.

  6. METHODOLOGY OF PROFESSIONAL PEDAGOGICAL EDUCATION: THEORY AND PRACTICE (theoretical and methodological foundations of vocational teacher education

    Directory of Open Access Journals (Sweden)

    Evgeny M. Dorozhkin

    2014-01-01

    methodology taking into consideration the target orientation, principles and approaches to the organization and its’ methods of scientific and educational activities implementation. The qualification structure formation of the teachers’ vocational training and providing advance principles of education are considered to be the most important conditions for the development of vocational teacher education. Scientific novelty. The research demonstrates creating the project of further vocational teacher education development in the post-industrial society. The pedagogical innovations transforming research findings into educational practice are considered to be the main tool of integration methodology means. Practical significance. The research findings highlight the proposed reforms for further teachers training system development of vocational institutes, which are in need of drastic restructuring. In the final part of the article the authors recommend some specific issues that can be discussed at the methodological workshop. 

  7. Human error probability quantification using fuzzy methodology in nuclear plants

    International Nuclear Information System (INIS)

    Nascimento, Claudio Souza do

    2010-01-01

    This work obtains Human Error Probability (HEP) estimates from operator's actions in response to emergency situations a hypothesis on Research Reactor IEA-R1 from IPEN. It was also obtained a Performance Shaping Factors (PSF) evaluation in order to classify them according to their influence level onto the operator's actions and to determine these PSF actual states over the plant. Both HEP estimation and PSF evaluation were done based on Specialists Evaluation using interviews and questionnaires. Specialists group was composed from selected IEA-R1 operators. Specialist's knowledge representation into linguistic variables and group evaluation values were obtained through Fuzzy Logic and Fuzzy Set Theory. HEP obtained values show good agreement with literature published data corroborating the proposed methodology as a good alternative to be used on Human Reliability Analysis (HRA). (author)

  8. The methodology of environmental impacts assessment of environmentally hazardous facilities

    OpenAIRE

    Adamenko, Yaroslav

    2017-01-01

    The article deals with the methodology of environmental impacts assessment of environmentally hazardous facilities and activities. The stages of evaluation of environmental impacts are proved. The algorithm and technology of decision-making in the system of environmental impact assessments based on a multi-criteria utility theory are proposed.

  9. Networks as integrated in research methodologies in PER

    DEFF Research Database (Denmark)

    Bruun, Jesper

    2016-01-01

    of using networks to create insightful maps of learning discussions. To conclude, I argue that conceptual blending is a powerful framework for constructing "mixed methods" methodologies that may integrate diverse theories and other methodologies with network methodologies.......In recent years a number of researchers within the PER community have started using network analysis as a new methodology to extend our understanding of teaching and learning physics by viewing these as complex systems. In this paper, I give examples of social, cognitive, and action mapping...... networks and how they can be analyzed. In so doing I show how a network can be methodologically described as a set of relations between a set of entities, and how a network can be characterized and analyzed as a mathematical object. Then, as an illustrative example, I discuss a relatively new example...

  10. Testing methodology of embedded software in digital plant protection system

    International Nuclear Information System (INIS)

    Seong, Ah Young; Choi, Bong Joo; Lee, Na Young; Hwang, Il Soon

    2001-01-01

    It is necessary to assure the reliability of software in order to digitalize RPS(Reactor Protection System). Since RPS causes fatal damage on accidental cases, it is classified as Safety 1E class. Therefore we propose the effective testing methodology to assure the reliability of embedded software in the DPPS(Digital Plant Protection System). To test the embedded software effectively in DPPS, our methodology consists of two steps. The first is the re-engineering step that extracts classes from structural source program, and the second is the level of testing step which is composed of unit testing, Integration Testing and System Testing. On each testing step we test the embedded software with selected test cases after the test item identification step. If we use this testing methodology, we can test the embedded software effectively by reducing the cost and the time

  11. Application of Bow-tie methodology to improve patient safety.

    Science.gov (United States)

    Abdi, Zhaleh; Ravaghi, Hamid; Abbasi, Mohsen; Delgoshaei, Bahram; Esfandiari, Somayeh

    2016-05-09

    Purpose - The purpose of this paper is to apply Bow-tie methodology, a proactive risk assessment technique based on systemic approach, for prospective analysis of the risks threatening patient safety in intensive care unit (ICU). Design/methodology/approach - Bow-tie methodology was used to manage clinical risks threatening patient safety by a multidisciplinary team in the ICU. The Bow-tie analysis was conducted on incidents related to high-alert medications, ventilator associated pneumonia, catheter-related blood stream infection, urinary tract infection, and unwanted extubation. Findings - In total, 48 potential adverse events were analysed. The causal factors were identified and classified into relevant categories. The number and effectiveness of existing preventive and protective barriers were examined for each potential adverse event. The adverse events were evaluated according to the risk criteria and a set of interventions were proposed with the aim of improving the existing barriers or implementing new barriers. A number of recommendations were implemented in the ICU, while considering their feasibility. Originality/value - The application of Bow-tie methodology led to practical recommendations to eliminate or control the hazards identified. It also contributed to better understanding of hazard prevention and protection required for safe operations in clinical settings.

  12. Knowledge Management Audit - a methodology and case study

    Directory of Open Access Journals (Sweden)

    Thomas Lauer

    2001-11-01

    Full Text Available The strategic importance of knowledge in today’s organisation has been discussed extensively and research has looked at various issues in developing knowledge management systems. Both the characterisation of knowledge and alternate models for understanding the acquisition and use of such knowledge have taken on significant prominence. This is due to the complexities associated with acquiring and representing knowledge, and the varied nature of its use in knowledge work. However, the role of the knowledge workers and the processes that guide their knowledge work as they meet the knowledge goals of an organisation have received little attention. This paper proposes a knowledge audit (an assessment of the way knowledge processes meet an organisation’s knowledge goals methodology to understand the “gaps” in the needs of a knowledge worker before one develops KM systems. The methodology also uses “process change” research to help build a socio-technical environment critical for knowledge work. The audit methodology is applied to a particular case and the implementation of the audit recommendations is discussed. Future implications of such an audit are also discussed.

  13. The origin of life and its methodological challenge.

    Science.gov (United States)

    Wächtershäuser, G

    1997-08-21

    The problem of the origin of life is discussed from a methodological point of view as an encounter between the teleological thinking of the historian and the mechanistic thinking of the chemist; and as the Kantian task of replacing teleology by mechanism. It is shown how the Popperian situational logic of historic understanding and the Popperian principle of explanatory power of scientific theories, when jointly applied to biochemistry, lead to a methodology of biochemical retrodiction, whereby common precursor functions are constructed for disparate successor functions. This methodology is exemplified by central tenets of the theory of the chemo-autotrophic origin of life: the proposal of a surface metabolism with a two-dimensional order; the basic polarity of life with negatively charged constituents on positively charged mineral surfaces; the surface-metabolic origin of phosphorylated sugar metabolism and nucleic acids; the origin of membrane lipids and of chemi-osmosis on pyrite surfaces; and the principles of the origin of the genetic machinery. The theory presents the early evolution of life as a process that begins with chemical necessity and winds up in genetic chance.

  14. Methodological quality of systematic reviews on influenza vaccination.

    Science.gov (United States)

    Remschmidt, Cornelius; Wichmann, Ole; Harder, Thomas

    2014-03-26

    There is a growing body of evidence on the risks and benefits of influenza vaccination in various target groups. Systematic reviews are of particular importance for policy decisions. However, their methodological quality can vary considerably. To investigate the methodological quality of systematic reviews on influenza vaccination (efficacy, effectiveness, safety) and to identify influencing factors. A systematic literature search on systematic reviews on influenza vaccination was performed, using MEDLINE, EMBASE and three additional databases (1990-2013). Review characteristics were extracted and the methodological quality of the reviews was evaluated using the assessment of multiple systematic reviews (AMSTAR) tool. U-test, Kruskal-Wallis test, chi-square test, and multivariable linear regression analysis were used to assess the influence of review characteristics on AMSTAR-score. Fourty-six systematic reviews fulfilled the inclusion criteria. Average methodological quality was high (median AMSTAR-score: 8), but variability was large (AMSTAR range: 0-11). Quality did not differ significantly according to vaccination target group. Cochrane reviews had higher methodological quality than non-Cochrane reviews (p=0.001). Detailed analysis showed that this was due to better study selection and data extraction, inclusion of unpublished studies, and better reporting of study characteristics (all p<0.05). In the adjusted analysis, no other factor, including industry sponsorship or journal impact factor had an influence on AMSTAR score. Systematic reviews on influenza vaccination showed large differences regarding their methodological quality. Reviews conducted by the Cochrane collaboration were of higher quality than others. When using systematic reviews to guide the development of vaccination recommendations, the methodological quality of a review in addition to its content should be considered. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. A framework for characterizing usability requirements elicitation and analysis methodologies (UREAM)

    NARCIS (Netherlands)

    Trienekens, J.J.M.; Kusters, R.J.; Mannaert, H.

    2012-01-01

    Dedicated methodologies for the elicitation and analysis of usability requirements have been proposed in literature, usually developed by usability experts. The usability of these approaches by non-expert software engineers is not obvious. In this paper, the objective is to support developers and

  16. High-level methodology for carrying out combined red and blue teams

    CSIR Research Space (South Africa)

    Veerasamy, N

    2009-12-01

    Full Text Available This paper proposes a combined Red and Blue Team Methodology to guide the process of carrying out such security auditing and penetration testing tasks. Red and Blue Teams consist of various security auditing and penetration testing tasks which serve...

  17. Methodological proposal for defining mining vocation in Venezuelan land-use planning; Propuesta metodologica para definir la vocacion minera en el contexto del ordenamiento territorial venezolano

    Energy Technology Data Exchange (ETDEWEB)

    Valladares Salinas, R. Y.; Dall Pozzo, F.; Castillo Padron, A. J.

    2015-07-01

    Mining is an economic activity which is necessary to provide raw materials for the different socio-productive networks of the country. Its application depends on the mineralogical occurrence offered by the geological conditions of an area and requires planning due to the fact that it needs to be located in a geographical space and the environment fragility of this space and the socio-economic and political-institutional legislation at a given moment all have to be taken into account. Therefore, the objective of this research consists of a proposal for a methodological model to define areas with mining adapted to the Venezuelan context of land-use planning, in order to assign mining uses to the most appropriate areas for that goal, considering the selection, assessment and integration of a series of variables and indicators adjusted to the thematic information available. (Author)

  18. A grey-based group decision-making methodology for the selection of hydrogen technologiess in Life Cycle Sustainability perspective

    DEFF Research Database (Denmark)

    Manzardo, Alessandro; Ren, Jingzheng; Mazzi, Anna

    2012-01-01

    The objective of this research is to develop a grey-based group decision-making methodology for the selection of the best renewable energy technology (including hydrogen) using a life cycle sustainability perspective. The traditional grey relational analysis has been modified to better address...... the issue of uncertainty. The proposed methodology allows multi-person to participate in the decision-making process and to give linguistic evaluation on the weights of the criteria and the performance of the alternative technologies. In this paper, twelve hydrogen production technologies have been assessed...... using the proposed methodology, electrolysis of water technology by hydropower has been considered to be the best technology for hydrogen production according to the decision-making group....

  19. Methodologies for assessment of the service life of pressure tubes in Indian PHWRs

    International Nuclear Information System (INIS)

    Sinha, R.K.; Sharma, A.; Madhusoodanan, K.; Sinha, S.K.; Malshe, U.D.

    1997-01-01

    For estimating safe service life of pressure tubes in Indian PHWRs, analytical methodologies have been developed to evaluate creep deformation, deuterium pick-up rate, blister growth at cold spot, and operating domain required for achieving leak-before-break. The paper provides an overview of these methodologies, and results of some studies carried out towards evolution of proposed fitness-for-service criteria for a pressure tube in contact with its calandria tube. (author)

  20. An alternative methodology for teaching English in the first cycle of primary education

    Directory of Open Access Journals (Sweden)

    Nery I. Calvet Valdés

    2005-03-01

    Full Text Available The implementation of English language programs in the first cycle of primary education makes it necessary to implement a methodology that leads enclosed in itself the challenge imposed on us every day to create a man more prepared in communicating in foreign languages. The article proposes a methodology that has as its core concepts characterization of the school, values education, communication and culture in learning conditions that encourage interaction.